diff --git a/.clang-format b/.clang-format
index e92e6dd1780d..a0a96088c74f 100644
--- a/.clang-format
+++ b/.clang-format
@@ -80,6 +80,7 @@ ForEachMacros:
   - 'ax25_uid_for_each'
   - '__bio_for_each_bvec'
   - 'bio_for_each_bvec'
+  - 'bio_for_each_bvec_all'
   - 'bio_for_each_integrity_vec'
   - '__bio_for_each_segment'
   - 'bio_for_each_segment'
diff --git a/.mailmap b/.mailmap
index db3754a41018..4600dcfed0d3 100644
--- a/.mailmap
+++ b/.mailmap
@@ -152,6 +152,7 @@ Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leon Romanovsky <leon@kernel.org> <leon@leon.nu>
 Leon Romanovsky <leon@kernel.org> <leonro@mellanox.com>
+Leonardo Bras <leobras.c@gmail.com> <leonardo@linux.ibm.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
diff --git a/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
new file mode 100644
index 000000000000..39d5659f388b
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
@@ -0,0 +1,22 @@
+These files allow sending arbitrary IPC commands to the PMC/SCU which
+may be dangerous. These will be removed eventually and should not be
+used in any new applications.
+
+What:		/sys/bus/platform/devices/INT34D2:00/simplecmd
+Date:		Jun 2015
+KernelVersion:	4.1
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This interface allows userspace to send an arbitrary
+		IPC command to the PMC/SCU.
+
+		Format: %d %d where first number is command and
+		second number is subcommand.
+
+What:		/sys/bus/platform/devices/INT34D2:00/northpeak
+Date:		Jun 2015
+KernelVersion:	4.1
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This interface allows userspace to enable and disable
+		Northpeak through the PMC/SCU.
+
+		Format: %u.
diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
index df8413cf1468..484fc04bcc25 100644
--- a/Documentation/ABI/stable/sysfs-devices-node
+++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -54,7 +54,7 @@ Date:		October 2002
 Contact:	Linux Memory Management list <linux-mm@kvack.org>
 Description:
 		Provides information about the node's distribution and memory
-		utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.txt
+		utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.rst
 
 What:		/sys/devices/system/node/nodeX/numastat
 Date:		October 2002
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd
index f4be46cc6cb6..b5bebf642db6 100644
--- a/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -1,3 +1,9 @@
+What:		sys/bus/dsa/devices/dsa<m>/version
+Date:		Apr 15, 2020
+KernelVersion:	5.8.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The hardware version number.
+
 What:           sys/bus/dsa/devices/dsa<m>/cdev_major
 Date:           Oct 25, 2019
 KernelVersion: 	5.6.0
diff --git a/Documentation/ABI/testing/debugfs-cec-error-inj b/Documentation/ABI/testing/debugfs-cec-error-inj
index 4c3596c6d25b..5afcd78fbdb7 100644
--- a/Documentation/ABI/testing/debugfs-cec-error-inj
+++ b/Documentation/ABI/testing/debugfs-cec-error-inj
@@ -37,4 +37,4 @@ when changes are made.
 
 The following CEC error injection implementations exist:
 
-- Documentation/media/uapi/cec/cec-pin-error-inj.rst
+- Documentation/userspace-api/media/cec/cec-pin-error-inj.rst
diff --git a/Documentation/ABI/testing/procfs-smaps_rollup b/Documentation/ABI/testing/procfs-smaps_rollup
index 274df44d8b1b..046978193368 100644
--- a/Documentation/ABI/testing/procfs-smaps_rollup
+++ b/Documentation/ABI/testing/procfs-smaps_rollup
@@ -11,7 +11,7 @@ Description:
 		Additionally, the fields Pss_Anon, Pss_File and Pss_Shmem
 		are not present in /proc/pid/smaps.  These fields represent
 		the sum of the Pss field of each type (anon, file, shmem).
-		For more details, see Documentation/filesystems/proc.txt
+		For more details, see Documentation/filesystems/proc.rst
 		and the procfs man page.
 
 		Typical output looks like this:
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity b/Documentation/ABI/testing/sysfs-bus-iio-proximity
new file mode 100644
index 000000000000..2172f3bb9c64
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity
@@ -0,0 +1,10 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_nearlevel
+Date:		March 2020
+KernelVersion:	5.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Near level for proximity sensors. This is a single integer
+		value that tells user space when an object should be
+		considered close to the device. If the value read from the
+		sensor is above or equal to the value in this file an object
+		should typically be considered near.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9310 b/Documentation/ABI/testing/sysfs-bus-iio-sx9310
new file mode 100644
index 000000000000..3ac7759013e5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9310
@@ -0,0 +1,10 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity3_comb_raw
+Date:		February 2019
+KernelVersion:	5.6
+Contact:	Daniel Campello <campello@chromium.org>
+Description:
+		Proximity measurement indicating that some object is
+		near the combined sensor. The combined sensor presents
+		proximity measurements constructed by hardware by
+		combining measurements taken from a given set of
+		physical sensors.
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
index 664a8f6a634f..3b404577f380 100644
--- a/Documentation/ABI/testing/sysfs-class-net
+++ b/Documentation/ABI/testing/sysfs-class-net
@@ -124,6 +124,19 @@ Description:
 		authentication is performed (e.g: 802.1x). 'link_mode' attribute
 		will also reflect the dormant state.
 
+What:		/sys/class/net/<iface>/testing
+Date:		April 2002
+KernelVersion:	5.8
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates whether the interface is under test. Possible
+		values are:
+		0: interface is not being tested
+		1: interface is being tested
+
+		When an interface is under test, it cannot be expected
+		to pass packets as normal.
+
 What:		/sys/clas/net/<iface>/duplex
 Date:		October 2009
 KernelVersion:	2.6.33
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index bd8a0d19abe6..427f5b45c67f 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -323,3 +323,18 @@ What:		/sys/fs/f2fs/<disk>/mounted_time_sec
 Date:		February 2020
 Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:	Show the mounted time in secs of this partition.
+
+What:		/sys/fs/f2fs/<disk>/data_io_flag
+Date:		April 2020
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:	Give a way to attach REQ_META|FUA to data writes
+		given temperature-based bits. Now the bits indicate:
+		*      REQ_META     |      REQ_FUA      |
+		*    5 |    4 |   3 |    2 |    1 |   0 |
+		* Cold | Warm | Hot | Cold | Warm | Hot |
+
+What:		/sys/fs/f2fs/<disk>/iostat_period_ms
+Date:		April 2020
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	Give a way to change iostat_period time. 3secs by default.
+		The new iostat trace gives stats gap given the period.
diff --git a/Documentation/Makefile b/Documentation/Makefile
index cc786d11a028..6b12dd82f712 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -55,15 +55,15 @@ I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
 loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
 
 # $2 sphinx builder e.g. "html"
-# $3 name of the build subfolder / e.g. "media", used as:
+# $3 name of the build subfolder / e.g. "userspace-api/media", used as:
 #    * dest folder relative to $(BUILDDIR) and
 #    * cache folder relative to $(BUILDDIR)/.doctrees
-# $4 dest subfolder e.g. "man" for man pages at media/man
+# $4 dest subfolder e.g. "man" for man pages at userspace-api/media/man
 # $5 reST source folder relative to $(srctree)/$(src),
-#    e.g. "media" for the linux-tv book-set at ./Documentation/media
+#    e.g. "userspace-api/media" for the linux-tv book-set at ./Documentation/userspace-api/media
 
 quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
-      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2 && \
+      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media $2 && \
 	PYTHONDONTWRITEBYTECODE=1 \
 	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
 	$(PYTHON) $(srctree)/scripts/jobserver-exec \
@@ -98,7 +98,11 @@ else # HAVE_PDFLATEX
 
 pdfdocs: latexdocs
 	@$(srctree)/scripts/sphinx-pre-install --version-check
-	$(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX="$(PDFLATEX)" LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;)
+	$(foreach var,$(SPHINXDIRS), \
+	   $(MAKE) PDFLATEX="$(PDFLATEX)" LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit; \
+	   mkdir -p $(BUILDDIR)/$(var)/pdf; \
+	   mv $(subst .tex,.pdf,$(wildcard $(BUILDDIR)/$(var)/latex/*.tex)) $(BUILDDIR)/$(var)/pdf/; \
+	)
 
 endif # HAVE_PDFLATEX
 
@@ -120,7 +124,7 @@ refcheckdocs:
 
 cleandocs:
 	$(Q)rm -rf $(BUILDDIR)
-	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean
+	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media clean
 
 dochelp:
 	@echo  ' Linux kernel internal documentation in different formats from ReST:'
diff --git a/Documentation/PCI/boot-interrupts.rst b/Documentation/PCI/boot-interrupts.rst
index d078ef3eb192..2ec70121bfca 100644
--- a/Documentation/PCI/boot-interrupts.rst
+++ b/Documentation/PCI/boot-interrupts.rst
@@ -32,12 +32,13 @@ interrupt goes unhandled over time, they are tracked by the Linux kernel as
 Spurious Interrupts. The IRQ will be disabled by the Linux kernel after it
 reaches a specific count with the error "nobody cared". This disabled IRQ
 now prevents valid usage by an existing interrupt which may happen to share
-the IRQ line.
+the IRQ line::
 
   irq 19: nobody cared (try booting with the "irqpoll" option)
   CPU: 0 PID: 2988 Comm: irq/34-nipalk Tainted: 4.14.87-rt49-02410-g4a640ec-dirty #1
   Hardware name: National Instruments NI PXIe-8880/NI PXIe-8880, BIOS 2.1.5f1 01/09/2020
   Call Trace:
+
   <IRQ>
    ? dump_stack+0x46/0x5e
    ? __report_bad_irq+0x2e/0xb0
@@ -85,15 +86,18 @@ Mitigations
 The mitigations take the form of PCI quirks. The preference has been to
 first identify and make use of a means to disable the routing to the PCH.
 In such a case a quirk to disable boot interrupt generation can be
-added.[1]
+added. [1]_
 
-  Intel® 6300ESB I/O Controller Hub
+Intel® 6300ESB I/O Controller Hub
   Alternate Base Address Register:
    BIE: Boot Interrupt Enable
-	  0 = Boot interrupt is enabled.
-	  1 = Boot interrupt is disabled.
 
-  Intel® Sandy Bridge through Sky Lake based Xeon servers:
+	  ==  ===========================
+	  0   Boot interrupt is enabled.
+	  1   Boot interrupt is disabled.
+	  ==  ===========================
+
+Intel® Sandy Bridge through Sky Lake based Xeon servers:
   Coherent Interface Protocol Interrupt Control
    dis_intx_route2pch/dis_intx_route2ich/dis_intx_route2dmi2:
 	  When this bit is set. Local INTx messages received from the
@@ -109,12 +113,12 @@ line by default.  Therefore, on chipsets where this INTx routing cannot be
 disabled, the Linux kernel will reroute the valid interrupt to its legacy
 interrupt. This redirection of the handler will prevent the occurrence of
 the spurious interrupt detection which would ordinarily disable the IRQ
-line due to excessive unhandled counts.[2]
+line due to excessive unhandled counts. [2]_
 
 The config option X86_REROUTE_FOR_BROKEN_BOOT_IRQS exists to enable (or
 disable) the redirection of the interrupt handler to the PCH interrupt
 line. The option can be overridden by either pci=ioapicreroute or
-pci=noioapicreroute.[3]
+pci=noioapicreroute. [3]_
 
 
 More Documentation
@@ -127,19 +131,19 @@ into the evolution of its handling with chipsets.
 Example of disabling of the boot interrupt
 ------------------------------------------
 
-Intel® 6300ESB I/O Controller Hub (Document # 300641-004US)
+      - Intel® 6300ESB I/O Controller Hub (Document # 300641-004US)
 	5.7.3 Boot Interrupt
 	https://www.intel.com/content/dam/doc/datasheet/6300esb-io-controller-hub-datasheet.pdf
 
-Intel® Xeon® Processor E5-1600/2400/2600/4600 v3 Product Families
-Datasheet - Volume 2: Registers (Document # 330784-003)
+      - Intel® Xeon® Processor E5-1600/2400/2600/4600 v3 Product Families
+	Datasheet - Volume 2: Registers (Document # 330784-003)
 	6.6.41 cipintrc Coherent Interface Protocol Interrupt Control
 	https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-v3-datasheet-vol-2.pdf
 
 Example of handler rerouting
 ----------------------------
 
-Intel® 6700PXH 64-bit PCI Hub (Document # 302628)
+      - Intel® 6700PXH 64-bit PCI Hub (Document # 302628)
 	2.15.2 PCI Express Legacy INTx Support and Boot Interrupt
 	https://www.intel.com/content/dam/doc/datasheet/6700pxh-64-bit-pci-hub-datasheet.pdf
 
@@ -150,6 +154,6 @@ Cheers,
     Sean V Kelley
     sean.v.kelley@linux.intel.com
 
-[1] https://lore.kernel.org/r/12131949181903-git-send-email-sassmann@suse.de/
-[2] https://lore.kernel.org/r/12131949182094-git-send-email-sassmann@suse.de/
-[3] https://lore.kernel.org/r/487C8EA7.6020205@suse.de/
+.. [1] https://lore.kernel.org/r/12131949181903-git-send-email-sassmann@suse.de/
+.. [2] https://lore.kernel.org/r/12131949182094-git-send-email-sassmann@suse.de/
+.. [3] https://lore.kernel.org/r/487C8EA7.6020205@suse.de/
diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst
index fd5e2cbc4935..75b8ca007a11 100644
--- a/Documentation/RCU/Design/Requirements/Requirements.rst
+++ b/Documentation/RCU/Design/Requirements/Requirements.rst
@@ -1943,56 +1943,27 @@ invoked from a CPU-hotplug notifier.
 Scheduler and RCU
 ~~~~~~~~~~~~~~~~~
 
-RCU depends on the scheduler, and the scheduler uses RCU to protect some
-of its data structures. The preemptible-RCU ``rcu_read_unlock()``
-implementation must therefore be written carefully to avoid deadlocks
-involving the scheduler's runqueue and priority-inheritance locks. In
-particular, ``rcu_read_unlock()`` must tolerate an interrupt where the
-interrupt handler invokes both ``rcu_read_lock()`` and
-``rcu_read_unlock()``. This possibility requires ``rcu_read_unlock()``
-to use negative nesting levels to avoid destructive recursion via
-interrupt handler's use of RCU.
-
-This scheduler-RCU requirement came as a `complete
-surprise <https://lwn.net/Articles/453002/>`__.
-
-As noted above, RCU makes use of kthreads, and it is necessary to avoid
-excessive CPU-time accumulation by these kthreads. This requirement was
-no surprise, but RCU's violation of it when running context-switch-heavy
-workloads when built with ``CONFIG_NO_HZ_FULL=y`` `did come as a
-surprise
+RCU makes use of kthreads, and it is necessary to avoid excessive CPU-time
+accumulation by these kthreads. This requirement was no surprise, but
+RCU's violation of it when running context-switch-heavy workloads when
+built with ``CONFIG_NO_HZ_FULL=y`` `did come as a surprise
 [PDF] <http://www.rdrop.com/users/paulmck/scalability/paper/BareMetal.2015.01.15b.pdf>`__.
 RCU has made good progress towards meeting this requirement, even for
 context-switch-heavy ``CONFIG_NO_HZ_FULL=y`` workloads, but there is
 room for further improvement.
 
-It is forbidden to hold any of scheduler's runqueue or
-priority-inheritance spinlocks across an ``rcu_read_unlock()`` unless
-interrupts have been disabled across the entire RCU read-side critical
-section, that is, up to and including the matching ``rcu_read_lock()``.
-Violating this restriction can result in deadlocks involving these
-scheduler spinlocks. There was hope that this restriction might be
-lifted when interrupt-disabled calls to ``rcu_read_unlock()`` started
-deferring the reporting of the resulting RCU-preempt quiescent state
-until the end of the corresponding interrupts-disabled region.
-Unfortunately, timely reporting of the corresponding quiescent state to
-expedited grace periods requires a call to ``raise_softirq()``, which
-can acquire these scheduler spinlocks. In addition, real-time systems
-using RCU priority boosting need this restriction to remain in effect
-because deferred quiescent-state reporting would also defer deboosting,
-which in turn would degrade real-time latencies.
-
-In theory, if a given RCU read-side critical section could be guaranteed
-to be less than one second in duration, holding a scheduler spinlock
-across that critical section's ``rcu_read_unlock()`` would require only
-that preemption be disabled across the entire RCU read-side critical
-section, not interrupts. Unfortunately, given the possibility of vCPU
-preemption, long-running interrupts, and so on, it is not possible in
-practice to guarantee that a given RCU read-side critical section will
-complete in less than one second. Therefore, as noted above, if
-scheduler spinlocks are held across a given call to
-``rcu_read_unlock()``, interrupts must be disabled across the entire RCU
-read-side critical section.
+There is no longer any prohibition against holding any of
+scheduler's runqueue or priority-inheritance spinlocks across an
+``rcu_read_unlock()``, even if interrupts and preemption were enabled
+somewhere within the corresponding RCU read-side critical section.
+Therefore, it is now perfectly legal to execute ``rcu_read_lock()``
+with preemption enabled, acquire one of the scheduler locks, and hold
+that lock across the matching ``rcu_read_unlock()``.
+
+Similarly, the RCU flavor consolidation has removed the need for negative
+nesting.  The fact that interrupt-disabled regions of code act as RCU
+read-side critical sections implicitly avoids earlier issues that used
+to result in destructive recursion via interrupt handler's use of RCU.
 
 Tracing and RCU
 ~~~~~~~~~~~~~~~
diff --git a/Documentation/RCU/checklist.rst b/Documentation/RCU/checklist.rst
new file mode 100644
index 000000000000..2efed9926c3f
--- /dev/null
+++ b/Documentation/RCU/checklist.rst
@@ -0,0 +1,465 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================================
+Review Checklist for RCU Patches
+================================
+
+
+This document contains a checklist for producing and reviewing patches
+that make use of RCU.  Violating any of the rules listed below will
+result in the same sorts of problems that leaving out a locking primitive
+would cause.  This list is based on experiences reviewing such patches
+over a rather long period of time, but improvements are always welcome!
+
+0.	Is RCU being applied to a read-mostly situation?  If the data
+	structure is updated more than about 10% of the time, then you
+	should strongly consider some other approach, unless detailed
+	performance measurements show that RCU is nonetheless the right
+	tool for the job.  Yes, RCU does reduce read-side overhead by
+	increasing write-side overhead, which is exactly why normal uses
+	of RCU will do much more reading than updating.
+
+	Another exception is where performance is not an issue, and RCU
+	provides a simpler implementation.  An example of this situation
+	is the dynamic NMI code in the Linux 2.6 kernel, at least on
+	architectures where NMIs are rare.
+
+	Yet another exception is where the low real-time latency of RCU's
+	read-side primitives is critically important.
+
+	One final exception is where RCU readers are used to prevent
+	the ABA problem (https://en.wikipedia.org/wiki/ABA_problem)
+	for lockless updates.  This does result in the mildly
+	counter-intuitive situation where rcu_read_lock() and
+	rcu_read_unlock() are used to protect updates, however, this
+	approach provides the same potential simplifications that garbage
+	collectors do.
+
+1.	Does the update code have proper mutual exclusion?
+
+	RCU does allow -readers- to run (almost) naked, but -writers- must
+	still use some sort of mutual exclusion, such as:
+
+	a.	locking,
+	b.	atomic operations, or
+	c.	restricting updates to a single task.
+
+	If you choose #b, be prepared to describe how you have handled
+	memory barriers on weakly ordered machines (pretty much all of
+	them -- even x86 allows later loads to be reordered to precede
+	earlier stores), and be prepared to explain why this added
+	complexity is worthwhile.  If you choose #c, be prepared to
+	explain how this single task does not become a major bottleneck on
+	big multiprocessor machines (for example, if the task is updating
+	information relating to itself that other tasks can read, there
+	by definition can be no bottleneck).  Note that the definition
+	of "large" has changed significantly:  Eight CPUs was "large"
+	in the year 2000, but a hundred CPUs was unremarkable in 2017.
+
+2.	Do the RCU read-side critical sections make proper use of
+	rcu_read_lock() and friends?  These primitives are needed
+	to prevent grace periods from ending prematurely, which
+	could result in data being unceremoniously freed out from
+	under your read-side code, which can greatly increase the
+	actuarial risk of your kernel.
+
+	As a rough rule of thumb, any dereference of an RCU-protected
+	pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(),
+	rcu_read_lock_sched(), or by the appropriate update-side lock.
+	Disabling of preemption can serve as rcu_read_lock_sched(), but
+	is less readable and prevents lockdep from detecting locking issues.
+
+	Letting RCU-protected pointers "leak" out of an RCU read-side
+	critical section is every bid as bad as letting them leak out
+	from under a lock.  Unless, of course, you have arranged some
+	other means of protection, such as a lock or a reference count
+	-before- letting them out of the RCU read-side critical section.
+
+3.	Does the update code tolerate concurrent accesses?
+
+	The whole point of RCU is to permit readers to run without
+	any locks or atomic operations.  This means that readers will
+	be running while updates are in progress.  There are a number
+	of ways to handle this concurrency, depending on the situation:
+
+	a.	Use the RCU variants of the list and hlist update
+		primitives to add, remove, and replace elements on
+		an RCU-protected list.	Alternatively, use the other
+		RCU-protected data structures that have been added to
+		the Linux kernel.
+
+		This is almost always the best approach.
+
+	b.	Proceed as in (a) above, but also maintain per-element
+		locks (that are acquired by both readers and writers)
+		that guard per-element state.  Of course, fields that
+		the readers refrain from accessing can be guarded by
+		some other lock acquired only by updaters, if desired.
+
+		This works quite well, also.
+
+	c.	Make updates appear atomic to readers.	For example,
+		pointer updates to properly aligned fields will
+		appear atomic, as will individual atomic primitives.
+		Sequences of operations performed under a lock will -not-
+		appear to be atomic to RCU readers, nor will sequences
+		of multiple atomic primitives.
+
+		This can work, but is starting to get a bit tricky.
+
+	d.	Carefully order the updates and the reads so that
+		readers see valid data at all phases of the update.
+		This is often more difficult than it sounds, especially
+		given modern CPUs' tendency to reorder memory references.
+		One must usually liberally sprinkle memory barriers
+		(smp_wmb(), smp_rmb(), smp_mb()) through the code,
+		making it difficult to understand and to test.
+
+		It is usually better to group the changing data into
+		a separate structure, so that the change may be made
+		to appear atomic by updating a pointer to reference
+		a new structure containing updated values.
+
+4.	Weakly ordered CPUs pose special challenges.  Almost all CPUs
+	are weakly ordered -- even x86 CPUs allow later loads to be
+	reordered to precede earlier stores.  RCU code must take all of
+	the following measures to prevent memory-corruption problems:
+
+	a.	Readers must maintain proper ordering of their memory
+		accesses.  The rcu_dereference() primitive ensures that
+		the CPU picks up the pointer before it picks up the data
+		that the pointer points to.  This really is necessary
+		on Alpha CPUs.	If you don't believe me, see:
+
+			http://www.openvms.compaq.com/wizard/wiz_2637.html
+
+		The rcu_dereference() primitive is also an excellent
+		documentation aid, letting the person reading the
+		code know exactly which pointers are protected by RCU.
+		Please note that compilers can also reorder code, and
+		they are becoming increasingly aggressive about doing
+		just that.  The rcu_dereference() primitive therefore also
+		prevents destructive compiler optimizations.  However,
+		with a bit of devious creativity, it is possible to
+		mishandle the return value from rcu_dereference().
+		Please see rcu_dereference.txt in this directory for
+		more information.
+
+		The rcu_dereference() primitive is used by the
+		various "_rcu()" list-traversal primitives, such
+		as the list_for_each_entry_rcu().  Note that it is
+		perfectly legal (if redundant) for update-side code to
+		use rcu_dereference() and the "_rcu()" list-traversal
+		primitives.  This is particularly useful in code that
+		is common to readers and updaters.  However, lockdep
+		will complain if you access rcu_dereference() outside
+		of an RCU read-side critical section.  See lockdep.txt
+		to learn what to do about this.
+
+		Of course, neither rcu_dereference() nor the "_rcu()"
+		list-traversal primitives can substitute for a good
+		concurrency design coordinating among multiple updaters.
+
+	b.	If the list macros are being used, the list_add_tail_rcu()
+		and list_add_rcu() primitives must be used in order
+		to prevent weakly ordered machines from misordering
+		structure initialization and pointer planting.
+		Similarly, if the hlist macros are being used, the
+		hlist_add_head_rcu() primitive is required.
+
+	c.	If the list macros are being used, the list_del_rcu()
+		primitive must be used to keep list_del()'s pointer
+		poisoning from inflicting toxic effects on concurrent
+		readers.  Similarly, if the hlist macros are being used,
+		the hlist_del_rcu() primitive is required.
+
+		The list_replace_rcu() and hlist_replace_rcu() primitives
+		may be used to replace an old structure with a new one
+		in their respective types of RCU-protected lists.
+
+	d.	Rules similar to (4b) and (4c) apply to the "hlist_nulls"
+		type of RCU-protected linked lists.
+
+	e.	Updates must ensure that initialization of a given
+		structure happens before pointers to that structure are
+		publicized.  Use the rcu_assign_pointer() primitive
+		when publicizing a pointer to a structure that can
+		be traversed by an RCU read-side critical section.
+
+5.	If call_rcu() or call_srcu() is used, the callback function will
+	be called from softirq context.  In particular, it cannot block.
+
+6.	Since synchronize_rcu() can block, it cannot be called
+	from any sort of irq context.  The same rule applies
+	for synchronize_srcu(), synchronize_rcu_expedited(), and
+	synchronize_srcu_expedited().
+
+	The expedited forms of these primitives have the same semantics
+	as the non-expedited forms, but expediting is both expensive and
+	(with the exception of synchronize_srcu_expedited()) unfriendly
+	to real-time workloads.  Use of the expedited primitives should
+	be restricted to rare configuration-change operations that would
+	not normally be undertaken while a real-time workload is running.
+	However, real-time workloads can use rcupdate.rcu_normal kernel
+	boot parameter to completely disable expedited grace periods,
+	though this might have performance implications.
+
+	In particular, if you find yourself invoking one of the expedited
+	primitives repeatedly in a loop, please do everyone a favor:
+	Restructure your code so that it batches the updates, allowing
+	a single non-expedited primitive to cover the entire batch.
+	This will very likely be faster than the loop containing the
+	expedited primitive, and will be much much easier on the rest
+	of the system, especially to real-time workloads running on
+	the rest of the system.
+
+7.	As of v4.20, a given kernel implements only one RCU flavor,
+	which is RCU-sched for PREEMPT=n and RCU-preempt for PREEMPT=y.
+	If the updater uses call_rcu() or synchronize_rcu(),
+	then the corresponding readers my use rcu_read_lock() and
+	rcu_read_unlock(), rcu_read_lock_bh() and rcu_read_unlock_bh(),
+	or any pair of primitives that disables and re-enables preemption,
+	for example, rcu_read_lock_sched() and rcu_read_unlock_sched().
+	If the updater uses synchronize_srcu() or call_srcu(),
+	then the corresponding readers must use srcu_read_lock() and
+	srcu_read_unlock(), and with the same srcu_struct.  The rules for
+	the expedited primitives are the same as for their non-expedited
+	counterparts.  Mixing things up will result in confusion and
+	broken kernels, and has even resulted in an exploitable security
+	issue.
+
+	One exception to this rule: rcu_read_lock() and rcu_read_unlock()
+	may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh()
+	in cases where local bottom halves are already known to be
+	disabled, for example, in irq or softirq context.  Commenting
+	such cases is a must, of course!  And the jury is still out on
+	whether the increased speed is worth it.
+
+8.	Although synchronize_rcu() is slower than is call_rcu(), it
+	usually results in simpler code.  So, unless update performance is
+	critically important, the updaters cannot block, or the latency of
+	synchronize_rcu() is visible from userspace, synchronize_rcu()
+	should be used in preference to call_rcu().  Furthermore,
+	kfree_rcu() usually results in even simpler code than does
+	synchronize_rcu() without synchronize_rcu()'s multi-millisecond
+	latency.  So please take advantage of kfree_rcu()'s "fire and
+	forget" memory-freeing capabilities where it applies.
+
+	An especially important property of the synchronize_rcu()
+	primitive is that it automatically self-limits: if grace periods
+	are delayed for whatever reason, then the synchronize_rcu()
+	primitive will correspondingly delay updates.  In contrast,
+	code using call_rcu() should explicitly limit update rate in
+	cases where grace periods are delayed, as failing to do so can
+	result in excessive realtime latencies or even OOM conditions.
+
+	Ways of gaining this self-limiting property when using call_rcu()
+	include:
+
+	a.	Keeping a count of the number of data-structure elements
+		used by the RCU-protected data structure, including
+		those waiting for a grace period to elapse.  Enforce a
+		limit on this number, stalling updates as needed to allow
+		previously deferred frees to complete.	Alternatively,
+		limit only the number awaiting deferred free rather than
+		the total number of elements.
+
+		One way to stall the updates is to acquire the update-side
+		mutex.	(Don't try this with a spinlock -- other CPUs
+		spinning on the lock could prevent the grace period
+		from ever ending.)  Another way to stall the updates
+		is for the updates to use a wrapper function around
+		the memory allocator, so that this wrapper function
+		simulates OOM when there is too much memory awaiting an
+		RCU grace period.  There are of course many other
+		variations on this theme.
+
+	b.	Limiting update rate.  For example, if updates occur only
+		once per hour, then no explicit rate limiting is
+		required, unless your system is already badly broken.
+		Older versions of the dcache subsystem take this approach,
+		guarding updates with a global lock, limiting their rate.
+
+	c.	Trusted update -- if updates can only be done manually by
+		superuser or some other trusted user, then it might not
+		be necessary to automatically limit them.  The theory
+		here is that superuser already has lots of ways to crash
+		the machine.
+
+	d.	Periodically invoke synchronize_rcu(), permitting a limited
+		number of updates per grace period.
+
+	The same cautions apply to call_srcu() and kfree_rcu().
+
+	Note that although these primitives do take action to avoid memory
+	exhaustion when any given CPU has too many callbacks, a determined
+	user could still exhaust memory.  This is especially the case
+	if a system with a large number of CPUs has been configured to
+	offload all of its RCU callbacks onto a single CPU, or if the
+	system has relatively little free memory.
+
+9.	All RCU list-traversal primitives, which include
+	rcu_dereference(), list_for_each_entry_rcu(), and
+	list_for_each_safe_rcu(), must be either within an RCU read-side
+	critical section or must be protected by appropriate update-side
+	locks.	RCU read-side critical sections are delimited by
+	rcu_read_lock() and rcu_read_unlock(), or by similar primitives
+	such as rcu_read_lock_bh() and rcu_read_unlock_bh(), in which
+	case the matching rcu_dereference() primitive must be used in
+	order to keep lockdep happy, in this case, rcu_dereference_bh().
+
+	The reason that it is permissible to use RCU list-traversal
+	primitives when the update-side lock is held is that doing so
+	can be quite helpful in reducing code bloat when common code is
+	shared between readers and updaters.  Additional primitives
+	are provided for this case, as discussed in lockdep.txt.
+
+10.	Conversely, if you are in an RCU read-side critical section,
+	and you don't hold the appropriate update-side lock, you -must-
+	use the "_rcu()" variants of the list macros.  Failing to do so
+	will break Alpha, cause aggressive compilers to generate bad code,
+	and confuse people trying to read your code.
+
+11.	Any lock acquired by an RCU callback must be acquired elsewhere
+	with softirq disabled, e.g., via spin_lock_irqsave(),
+	spin_lock_bh(), etc.  Failing to disable softirq on a given
+	acquisition of that lock will result in deadlock as soon as
+	the RCU softirq handler happens to run your RCU callback while
+	interrupting that acquisition's critical section.
+
+12.	RCU callbacks can be and are executed in parallel.  In many cases,
+	the callback code simply wrappers around kfree(), so that this
+	is not an issue (or, more accurately, to the extent that it is
+	an issue, the memory-allocator locking handles it).  However,
+	if the callbacks do manipulate a shared data structure, they
+	must use whatever locking or other synchronization is required
+	to safely access and/or modify that data structure.
+
+	Do not assume that RCU callbacks will be executed on the same
+	CPU that executed the corresponding call_rcu() or call_srcu().
+	For example, if a given CPU goes offline while having an RCU
+	callback pending, then that RCU callback will execute on some
+	surviving CPU.	(If this was not the case, a self-spawning RCU
+	callback would prevent the victim CPU from ever going offline.)
+	Furthermore, CPUs designated by rcu_nocbs= might well -always-
+	have their RCU callbacks executed on some other CPUs, in fact,
+	for some  real-time workloads, this is the whole point of using
+	the rcu_nocbs= kernel boot parameter.
+
+13.	Unlike other forms of RCU, it -is- permissible to block in an
+	SRCU read-side critical section (demarked by srcu_read_lock()
+	and srcu_read_unlock()), hence the "SRCU": "sleepable RCU".
+	Please note that if you don't need to sleep in read-side critical
+	sections, you should be using RCU rather than SRCU, because RCU
+	is almost always faster and easier to use than is SRCU.
+
+	Also unlike other forms of RCU, explicit initialization and
+	cleanup is required either at build time via DEFINE_SRCU()
+	or DEFINE_STATIC_SRCU() or at runtime via init_srcu_struct()
+	and cleanup_srcu_struct().  These last two are passed a
+	"struct srcu_struct" that defines the scope of a given
+	SRCU domain.  Once initialized, the srcu_struct is passed
+	to srcu_read_lock(), srcu_read_unlock() synchronize_srcu(),
+	synchronize_srcu_expedited(), and call_srcu().	A given
+	synchronize_srcu() waits only for SRCU read-side critical
+	sections governed by srcu_read_lock() and srcu_read_unlock()
+	calls that have been passed the same srcu_struct.  This property
+	is what makes sleeping read-side critical sections tolerable --
+	a given subsystem delays only its own updates, not those of other
+	subsystems using SRCU.	Therefore, SRCU is less prone to OOM the
+	system than RCU would be if RCU's read-side critical sections
+	were permitted to sleep.
+
+	The ability to sleep in read-side critical sections does not
+	come for free.	First, corresponding srcu_read_lock() and
+	srcu_read_unlock() calls must be passed the same srcu_struct.
+	Second, grace-period-detection overhead is amortized only
+	over those updates sharing a given srcu_struct, rather than
+	being globally amortized as they are for other forms of RCU.
+	Therefore, SRCU should be used in preference to rw_semaphore
+	only in extremely read-intensive situations, or in situations
+	requiring SRCU's read-side deadlock immunity or low read-side
+	realtime latency.  You should also consider percpu_rw_semaphore
+	when you need lightweight readers.
+
+	SRCU's expedited primitive (synchronize_srcu_expedited())
+	never sends IPIs to other CPUs, so it is easier on
+	real-time workloads than is synchronize_rcu_expedited().
+
+	Note that rcu_assign_pointer() relates to SRCU just as it does to
+	other forms of RCU, but instead of rcu_dereference() you should
+	use srcu_dereference() in order to avoid lockdep splats.
+
+14.	The whole point of call_rcu(), synchronize_rcu(), and friends
+	is to wait until all pre-existing readers have finished before
+	carrying out some otherwise-destructive operation.  It is
+	therefore critically important to -first- remove any path
+	that readers can follow that could be affected by the
+	destructive operation, and -only- -then- invoke call_rcu(),
+	synchronize_rcu(), or friends.
+
+	Because these primitives only wait for pre-existing readers, it
+	is the caller's responsibility to guarantee that any subsequent
+	readers will execute safely.
+
+15.	The various RCU read-side primitives do -not- necessarily contain
+	memory barriers.  You should therefore plan for the CPU
+	and the compiler to freely reorder code into and out of RCU
+	read-side critical sections.  It is the responsibility of the
+	RCU update-side primitives to deal with this.
+
+	For SRCU readers, you can use smp_mb__after_srcu_read_unlock()
+	immediately after an srcu_read_unlock() to get a full barrier.
+
+16.	Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the
+	__rcu sparse checks to validate your RCU code.	These can help
+	find problems as follows:
+
+	CONFIG_PROVE_LOCKING:
+		check that accesses to RCU-protected data
+		structures are carried out under the proper RCU
+		read-side critical section, while holding the right
+		combination of locks, or whatever other conditions
+		are appropriate.
+
+	CONFIG_DEBUG_OBJECTS_RCU_HEAD:
+		check that you don't pass the
+		same object to call_rcu() (or friends) before an RCU
+		grace period has elapsed since the last time that you
+		passed that same object to call_rcu() (or friends).
+
+	__rcu sparse checks:
+		tag the pointer to the RCU-protected data
+		structure with __rcu, and sparse will warn you if you
+		access that pointer without the services of one of the
+		variants of rcu_dereference().
+
+	These debugging aids can help you find problems that are
+	otherwise extremely difficult to spot.
+
+17.	If you register a callback using call_rcu() or call_srcu(), and
+	pass in a function defined within a loadable module, then it in
+	necessary to wait for all pending callbacks to be invoked after
+	the last invocation and before unloading that module.  Note that
+	it is absolutely -not- sufficient to wait for a grace period!
+	The current (say) synchronize_rcu() implementation is -not-
+	guaranteed to wait for callbacks registered on other CPUs.
+	Or even on the current CPU if that CPU recently went offline
+	and came back online.
+
+	You instead need to use one of the barrier functions:
+
+	-	call_rcu() -> rcu_barrier()
+	-	call_srcu() -> srcu_barrier()
+
+	However, these barrier functions are absolutely -not- guaranteed
+	to wait for a grace period.  In fact, if there are no call_rcu()
+	callbacks waiting anywhere in the system, rcu_barrier() is within
+	its rights to return immediately.
+
+	So if you need to wait for both an RCU grace period and for
+	all pre-existing call_rcu() callbacks, you will need to execute
+	both rcu_barrier() and synchronize_rcu(), if necessary, using
+	something like workqueues to to execute them concurrently.
+
+	See rcubarrier.txt for more information.
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
deleted file mode 100644
index e98ff261a438..000000000000
--- a/Documentation/RCU/checklist.txt
+++ /dev/null
@@ -1,458 +0,0 @@
-Review Checklist for RCU Patches
-
-
-This document contains a checklist for producing and reviewing patches
-that make use of RCU.  Violating any of the rules listed below will
-result in the same sorts of problems that leaving out a locking primitive
-would cause.  This list is based on experiences reviewing such patches
-over a rather long period of time, but improvements are always welcome!
-
-0.	Is RCU being applied to a read-mostly situation?  If the data
-	structure is updated more than about 10% of the time, then you
-	should strongly consider some other approach, unless detailed
-	performance measurements show that RCU is nonetheless the right
-	tool for the job.  Yes, RCU does reduce read-side overhead by
-	increasing write-side overhead, which is exactly why normal uses
-	of RCU will do much more reading than updating.
-
-	Another exception is where performance is not an issue, and RCU
-	provides a simpler implementation.  An example of this situation
-	is the dynamic NMI code in the Linux 2.6 kernel, at least on
-	architectures where NMIs are rare.
-
-	Yet another exception is where the low real-time latency of RCU's
-	read-side primitives is critically important.
-
-	One final exception is where RCU readers are used to prevent
-	the ABA problem (https://en.wikipedia.org/wiki/ABA_problem)
-	for lockless updates.  This does result in the mildly
-	counter-intuitive situation where rcu_read_lock() and
-	rcu_read_unlock() are used to protect updates, however, this
-	approach provides the same potential simplifications that garbage
-	collectors do.
-
-1.	Does the update code have proper mutual exclusion?
-
-	RCU does allow -readers- to run (almost) naked, but -writers- must
-	still use some sort of mutual exclusion, such as:
-
-	a.	locking,
-	b.	atomic operations, or
-	c.	restricting updates to a single task.
-
-	If you choose #b, be prepared to describe how you have handled
-	memory barriers on weakly ordered machines (pretty much all of
-	them -- even x86 allows later loads to be reordered to precede
-	earlier stores), and be prepared to explain why this added
-	complexity is worthwhile.  If you choose #c, be prepared to
-	explain how this single task does not become a major bottleneck on
-	big multiprocessor machines (for example, if the task is updating
-	information relating to itself that other tasks can read, there
-	by definition can be no bottleneck).  Note that the definition
-	of "large" has changed significantly:  Eight CPUs was "large"
-	in the year 2000, but a hundred CPUs was unremarkable in 2017.
-
-2.	Do the RCU read-side critical sections make proper use of
-	rcu_read_lock() and friends?  These primitives are needed
-	to prevent grace periods from ending prematurely, which
-	could result in data being unceremoniously freed out from
-	under your read-side code, which can greatly increase the
-	actuarial risk of your kernel.
-
-	As a rough rule of thumb, any dereference of an RCU-protected
-	pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(),
-	rcu_read_lock_sched(), or by the appropriate update-side lock.
-	Disabling of preemption can serve as rcu_read_lock_sched(), but
-	is less readable and prevents lockdep from detecting locking issues.
-
-	Letting RCU-protected pointers "leak" out of an RCU read-side
-	critical section is every bid as bad as letting them leak out
-	from under a lock.  Unless, of course, you have arranged some
-	other means of protection, such as a lock or a reference count
-	-before- letting them out of the RCU read-side critical section.
-
-3.	Does the update code tolerate concurrent accesses?
-
-	The whole point of RCU is to permit readers to run without
-	any locks or atomic operations.  This means that readers will
-	be running while updates are in progress.  There are a number
-	of ways to handle this concurrency, depending on the situation:
-
-	a.	Use the RCU variants of the list and hlist update
-		primitives to add, remove, and replace elements on
-		an RCU-protected list.	Alternatively, use the other
-		RCU-protected data structures that have been added to
-		the Linux kernel.
-
-		This is almost always the best approach.
-
-	b.	Proceed as in (a) above, but also maintain per-element
-		locks (that are acquired by both readers and writers)
-		that guard per-element state.  Of course, fields that
-		the readers refrain from accessing can be guarded by
-		some other lock acquired only by updaters, if desired.
-
-		This works quite well, also.
-
-	c.	Make updates appear atomic to readers.	For example,
-		pointer updates to properly aligned fields will
-		appear atomic, as will individual atomic primitives.
-		Sequences of operations performed under a lock will -not-
-		appear to be atomic to RCU readers, nor will sequences
-		of multiple atomic primitives.
-
-		This can work, but is starting to get a bit tricky.
-
-	d.	Carefully order the updates and the reads so that
-		readers see valid data at all phases of the update.
-		This is often more difficult than it sounds, especially
-		given modern CPUs' tendency to reorder memory references.
-		One must usually liberally sprinkle memory barriers
-		(smp_wmb(), smp_rmb(), smp_mb()) through the code,
-		making it difficult to understand and to test.
-
-		It is usually better to group the changing data into
-		a separate structure, so that the change may be made
-		to appear atomic by updating a pointer to reference
-		a new structure containing updated values.
-
-4.	Weakly ordered CPUs pose special challenges.  Almost all CPUs
-	are weakly ordered -- even x86 CPUs allow later loads to be
-	reordered to precede earlier stores.  RCU code must take all of
-	the following measures to prevent memory-corruption problems:
-
-	a.	Readers must maintain proper ordering of their memory
-		accesses.  The rcu_dereference() primitive ensures that
-		the CPU picks up the pointer before it picks up the data
-		that the pointer points to.  This really is necessary
-		on Alpha CPUs.	If you don't believe me, see:
-
-			http://www.openvms.compaq.com/wizard/wiz_2637.html
-
-		The rcu_dereference() primitive is also an excellent
-		documentation aid, letting the person reading the
-		code know exactly which pointers are protected by RCU.
-		Please note that compilers can also reorder code, and
-		they are becoming increasingly aggressive about doing
-		just that.  The rcu_dereference() primitive therefore also
-		prevents destructive compiler optimizations.  However,
-		with a bit of devious creativity, it is possible to
-		mishandle the return value from rcu_dereference().
-		Please see rcu_dereference.txt in this directory for
-		more information.
-
-		The rcu_dereference() primitive is used by the
-		various "_rcu()" list-traversal primitives, such
-		as the list_for_each_entry_rcu().  Note that it is
-		perfectly legal (if redundant) for update-side code to
-		use rcu_dereference() and the "_rcu()" list-traversal
-		primitives.  This is particularly useful in code that
-		is common to readers and updaters.  However, lockdep
-		will complain if you access rcu_dereference() outside
-		of an RCU read-side critical section.  See lockdep.txt
-		to learn what to do about this.
-
-		Of course, neither rcu_dereference() nor the "_rcu()"
-		list-traversal primitives can substitute for a good
-		concurrency design coordinating among multiple updaters.
-
-	b.	If the list macros are being used, the list_add_tail_rcu()
-		and list_add_rcu() primitives must be used in order
-		to prevent weakly ordered machines from misordering
-		structure initialization and pointer planting.
-		Similarly, if the hlist macros are being used, the
-		hlist_add_head_rcu() primitive is required.
-
-	c.	If the list macros are being used, the list_del_rcu()
-		primitive must be used to keep list_del()'s pointer
-		poisoning from inflicting toxic effects on concurrent
-		readers.  Similarly, if the hlist macros are being used,
-		the hlist_del_rcu() primitive is required.
-
-		The list_replace_rcu() and hlist_replace_rcu() primitives
-		may be used to replace an old structure with a new one
-		in their respective types of RCU-protected lists.
-
-	d.	Rules similar to (4b) and (4c) apply to the "hlist_nulls"
-		type of RCU-protected linked lists.
-
-	e.	Updates must ensure that initialization of a given
-		structure happens before pointers to that structure are
-		publicized.  Use the rcu_assign_pointer() primitive
-		when publicizing a pointer to a structure that can
-		be traversed by an RCU read-side critical section.
-
-5.	If call_rcu() or call_srcu() is used, the callback function will
-	be called from softirq context.  In particular, it cannot block.
-
-6.	Since synchronize_rcu() can block, it cannot be called
-	from any sort of irq context.  The same rule applies
-	for synchronize_srcu(), synchronize_rcu_expedited(), and
-	synchronize_srcu_expedited().
-
-	The expedited forms of these primitives have the same semantics
-	as the non-expedited forms, but expediting is both expensive and
-	(with the exception of synchronize_srcu_expedited()) unfriendly
-	to real-time workloads.  Use of the expedited primitives should
-	be restricted to rare configuration-change operations that would
-	not normally be undertaken while a real-time workload is running.
-	However, real-time workloads can use rcupdate.rcu_normal kernel
-	boot parameter to completely disable expedited grace periods,
-	though this might have performance implications.
-
-	In particular, if you find yourself invoking one of the expedited
-	primitives repeatedly in a loop, please do everyone a favor:
-	Restructure your code so that it batches the updates, allowing
-	a single non-expedited primitive to cover the entire batch.
-	This will very likely be faster than the loop containing the
-	expedited primitive, and will be much much easier on the rest
-	of the system, especially to real-time workloads running on
-	the rest of the system.
-
-7.	As of v4.20, a given kernel implements only one RCU flavor,
-	which is RCU-sched for PREEMPT=n and RCU-preempt for PREEMPT=y.
-	If the updater uses call_rcu() or synchronize_rcu(),
-	then the corresponding readers my use rcu_read_lock() and
-	rcu_read_unlock(), rcu_read_lock_bh() and rcu_read_unlock_bh(),
-	or any pair of primitives that disables and re-enables preemption,
-	for example, rcu_read_lock_sched() and rcu_read_unlock_sched().
-	If the updater uses synchronize_srcu() or call_srcu(),
-	then the corresponding readers must use srcu_read_lock() and
-	srcu_read_unlock(), and with the same srcu_struct.  The rules for
-	the expedited primitives are the same as for their non-expedited
-	counterparts.  Mixing things up will result in confusion and
-	broken kernels, and has even resulted in an exploitable security
-	issue.
-
-	One exception to this rule: rcu_read_lock() and rcu_read_unlock()
-	may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh()
-	in cases where local bottom halves are already known to be
-	disabled, for example, in irq or softirq context.  Commenting
-	such cases is a must, of course!  And the jury is still out on
-	whether the increased speed is worth it.
-
-8.	Although synchronize_rcu() is slower than is call_rcu(), it
-	usually results in simpler code.  So, unless update performance is
-	critically important, the updaters cannot block, or the latency of
-	synchronize_rcu() is visible from userspace, synchronize_rcu()
-	should be used in preference to call_rcu().  Furthermore,
-	kfree_rcu() usually results in even simpler code than does
-	synchronize_rcu() without synchronize_rcu()'s multi-millisecond
-	latency.  So please take advantage of kfree_rcu()'s "fire and
-	forget" memory-freeing capabilities where it applies.
-
-	An especially important property of the synchronize_rcu()
-	primitive is that it automatically self-limits: if grace periods
-	are delayed for whatever reason, then the synchronize_rcu()
-	primitive will correspondingly delay updates.  In contrast,
-	code using call_rcu() should explicitly limit update rate in
-	cases where grace periods are delayed, as failing to do so can
-	result in excessive realtime latencies or even OOM conditions.
-
-	Ways of gaining this self-limiting property when using call_rcu()
-	include:
-
-	a.	Keeping a count of the number of data-structure elements
-		used by the RCU-protected data structure, including
-		those waiting for a grace period to elapse.  Enforce a
-		limit on this number, stalling updates as needed to allow
-		previously deferred frees to complete.	Alternatively,
-		limit only the number awaiting deferred free rather than
-		the total number of elements.
-
-		One way to stall the updates is to acquire the update-side
-		mutex.	(Don't try this with a spinlock -- other CPUs
-		spinning on the lock could prevent the grace period
-		from ever ending.)  Another way to stall the updates
-		is for the updates to use a wrapper function around
-		the memory allocator, so that this wrapper function
-		simulates OOM when there is too much memory awaiting an
-		RCU grace period.  There are of course many other
-		variations on this theme.
-
-	b.	Limiting update rate.  For example, if updates occur only
-		once per hour, then no explicit rate limiting is
-		required, unless your system is already badly broken.
-		Older versions of the dcache subsystem take this approach,
-		guarding updates with a global lock, limiting their rate.
-
-	c.	Trusted update -- if updates can only be done manually by
-		superuser or some other trusted user, then it might not
-		be necessary to automatically limit them.  The theory
-		here is that superuser already has lots of ways to crash
-		the machine.
-
-	d.	Periodically invoke synchronize_rcu(), permitting a limited
-		number of updates per grace period.
-
-	The same cautions apply to call_srcu() and kfree_rcu().
-
-	Note that although these primitives do take action to avoid memory
-	exhaustion when any given CPU has too many callbacks, a determined
-	user could still exhaust memory.  This is especially the case
-	if a system with a large number of CPUs has been configured to
-	offload all of its RCU callbacks onto a single CPU, or if the
-	system has relatively little free memory.
-
-9.	All RCU list-traversal primitives, which include
-	rcu_dereference(), list_for_each_entry_rcu(), and
-	list_for_each_safe_rcu(), must be either within an RCU read-side
-	critical section or must be protected by appropriate update-side
-	locks.	RCU read-side critical sections are delimited by
-	rcu_read_lock() and rcu_read_unlock(), or by similar primitives
-	such as rcu_read_lock_bh() and rcu_read_unlock_bh(), in which
-	case the matching rcu_dereference() primitive must be used in
-	order to keep lockdep happy, in this case, rcu_dereference_bh().
-
-	The reason that it is permissible to use RCU list-traversal
-	primitives when the update-side lock is held is that doing so
-	can be quite helpful in reducing code bloat when common code is
-	shared between readers and updaters.  Additional primitives
-	are provided for this case, as discussed in lockdep.txt.
-
-10.	Conversely, if you are in an RCU read-side critical section,
-	and you don't hold the appropriate update-side lock, you -must-
-	use the "_rcu()" variants of the list macros.  Failing to do so
-	will break Alpha, cause aggressive compilers to generate bad code,
-	and confuse people trying to read your code.
-
-11.	Any lock acquired by an RCU callback must be acquired elsewhere
-	with softirq disabled, e.g., via spin_lock_irqsave(),
-	spin_lock_bh(), etc.  Failing to disable softirq on a given
-	acquisition of that lock will result in deadlock as soon as
-	the RCU softirq handler happens to run your RCU callback while
-	interrupting that acquisition's critical section.
-
-12.	RCU callbacks can be and are executed in parallel.  In many cases,
-	the callback code simply wrappers around kfree(), so that this
-	is not an issue (or, more accurately, to the extent that it is
-	an issue, the memory-allocator locking handles it).  However,
-	if the callbacks do manipulate a shared data structure, they
-	must use whatever locking or other synchronization is required
-	to safely access and/or modify that data structure.
-
-	Do not assume that RCU callbacks will be executed on the same
-	CPU that executed the corresponding call_rcu() or call_srcu().
-	For example, if a given CPU goes offline while having an RCU
-	callback pending, then that RCU callback will execute on some
-	surviving CPU.	(If this was not the case, a self-spawning RCU
-	callback would prevent the victim CPU from ever going offline.)
-	Furthermore, CPUs designated by rcu_nocbs= might well -always-
-	have their RCU callbacks executed on some other CPUs, in fact,
-	for some  real-time workloads, this is the whole point of using
-	the rcu_nocbs= kernel boot parameter.
-
-13.	Unlike other forms of RCU, it -is- permissible to block in an
-	SRCU read-side critical section (demarked by srcu_read_lock()
-	and srcu_read_unlock()), hence the "SRCU": "sleepable RCU".
-	Please note that if you don't need to sleep in read-side critical
-	sections, you should be using RCU rather than SRCU, because RCU
-	is almost always faster and easier to use than is SRCU.
-
-	Also unlike other forms of RCU, explicit initialization and
-	cleanup is required either at build time via DEFINE_SRCU()
-	or DEFINE_STATIC_SRCU() or at runtime via init_srcu_struct()
-	and cleanup_srcu_struct().  These last two are passed a
-	"struct srcu_struct" that defines the scope of a given
-	SRCU domain.  Once initialized, the srcu_struct is passed
-	to srcu_read_lock(), srcu_read_unlock() synchronize_srcu(),
-	synchronize_srcu_expedited(), and call_srcu().	A given
-	synchronize_srcu() waits only for SRCU read-side critical
-	sections governed by srcu_read_lock() and srcu_read_unlock()
-	calls that have been passed the same srcu_struct.  This property
-	is what makes sleeping read-side critical sections tolerable --
-	a given subsystem delays only its own updates, not those of other
-	subsystems using SRCU.	Therefore, SRCU is less prone to OOM the
-	system than RCU would be if RCU's read-side critical sections
-	were permitted to sleep.
-
-	The ability to sleep in read-side critical sections does not
-	come for free.	First, corresponding srcu_read_lock() and
-	srcu_read_unlock() calls must be passed the same srcu_struct.
-	Second, grace-period-detection overhead is amortized only
-	over those updates sharing a given srcu_struct, rather than
-	being globally amortized as they are for other forms of RCU.
-	Therefore, SRCU should be used in preference to rw_semaphore
-	only in extremely read-intensive situations, or in situations
-	requiring SRCU's read-side deadlock immunity or low read-side
-	realtime latency.  You should also consider percpu_rw_semaphore
-	when you need lightweight readers.
-
-	SRCU's expedited primitive (synchronize_srcu_expedited())
-	never sends IPIs to other CPUs, so it is easier on
-	real-time workloads than is synchronize_rcu_expedited().
-
-	Note that rcu_assign_pointer() relates to SRCU just as it does to
-	other forms of RCU, but instead of rcu_dereference() you should
-	use srcu_dereference() in order to avoid lockdep splats.
-
-14.	The whole point of call_rcu(), synchronize_rcu(), and friends
-	is to wait until all pre-existing readers have finished before
-	carrying out some otherwise-destructive operation.  It is
-	therefore critically important to -first- remove any path
-	that readers can follow that could be affected by the
-	destructive operation, and -only- -then- invoke call_rcu(),
-	synchronize_rcu(), or friends.
-
-	Because these primitives only wait for pre-existing readers, it
-	is the caller's responsibility to guarantee that any subsequent
-	readers will execute safely.
-
-15.	The various RCU read-side primitives do -not- necessarily contain
-	memory barriers.  You should therefore plan for the CPU
-	and the compiler to freely reorder code into and out of RCU
-	read-side critical sections.  It is the responsibility of the
-	RCU update-side primitives to deal with this.
-
-	For SRCU readers, you can use smp_mb__after_srcu_read_unlock()
-	immediately after an srcu_read_unlock() to get a full barrier.
-
-16.	Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the
-	__rcu sparse checks to validate your RCU code.	These can help
-	find problems as follows:
-
-	CONFIG_PROVE_LOCKING: check that accesses to RCU-protected data
-		structures are carried out under the proper RCU
-		read-side critical section, while holding the right
-		combination of locks, or whatever other conditions
-		are appropriate.
-
-	CONFIG_DEBUG_OBJECTS_RCU_HEAD: check that you don't pass the
-		same object to call_rcu() (or friends) before an RCU
-		grace period has elapsed since the last time that you
-		passed that same object to call_rcu() (or friends).
-
-	__rcu sparse checks: tag the pointer to the RCU-protected data
-		structure with __rcu, and sparse will warn you if you
-		access that pointer without the services of one of the
-		variants of rcu_dereference().
-
-	These debugging aids can help you find problems that are
-	otherwise extremely difficult to spot.
-
-17.	If you register a callback using call_rcu() or call_srcu(), and
-	pass in a function defined within a loadable module, then it in
-	necessary to wait for all pending callbacks to be invoked after
-	the last invocation and before unloading that module.  Note that
-	it is absolutely -not- sufficient to wait for a grace period!
-	The current (say) synchronize_rcu() implementation is -not-
-	guaranteed to wait for callbacks registered on other CPUs.
-	Or even on the current CPU if that CPU recently went offline
-	and came back online.
-
-	You instead need to use one of the barrier functions:
-
-	o	call_rcu() -> rcu_barrier()
-	o	call_srcu() -> srcu_barrier()
-
-	However, these barrier functions are absolutely -not- guaranteed
-	to wait for a grace period.  In fact, if there are no call_rcu()
-	callbacks waiting anywhere in the system, rcu_barrier() is within
-	its rights to return immediately.
-
-	So if you need to wait for both an RCU grace period and for
-	all pre-existing call_rcu() callbacks, you will need to execute
-	both rcu_barrier() and synchronize_rcu(), if necessary, using
-	something like workqueues to to execute them concurrently.
-
-	See rcubarrier.txt for more information.
diff --git a/Documentation/RCU/index.rst b/Documentation/RCU/index.rst
index 81a0a1e5f767..e703d3dbe60c 100644
--- a/Documentation/RCU/index.rst
+++ b/Documentation/RCU/index.rst
@@ -1,3 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0
+
 .. _rcu_concepts:
 
 ============
@@ -8,10 +10,17 @@ RCU concepts
    :maxdepth: 3
 
    arrayRCU
+   checklist
+   lockdep
+   lockdep-splat
    rcubarrier
    rcu_dereference
    whatisRCU
    rcu
+   rculist_nulls
+   rcuref
+   torture
+   stallwarn
    listRCU
    NMI-RCU
    UP
diff --git a/Documentation/RCU/lockdep-splat.rst b/Documentation/RCU/lockdep-splat.rst
new file mode 100644
index 000000000000..2a5c79db57dc
--- /dev/null
+++ b/Documentation/RCU/lockdep-splat.rst
@@ -0,0 +1,115 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+Lockdep-RCU Splat
+=================
+
+Lockdep-RCU was added to the Linux kernel in early 2010
+(http://lwn.net/Articles/371986/).  This facility checks for some common
+misuses of the RCU API, most notably using one of the rcu_dereference()
+family to access an RCU-protected pointer without the proper protection.
+When such misuse is detected, an lockdep-RCU splat is emitted.
+
+The usual cause of a lockdep-RCU slat is someone accessing an
+RCU-protected data structure without either (1) being in the right kind of
+RCU read-side critical section or (2) holding the right update-side lock.
+This problem can therefore be serious: it might result in random memory
+overwriting or worse.  There can of course be false positives, this
+being the real world and all that.
+
+So let's look at an example RCU lockdep splat from 3.0-rc5, one that
+has long since been fixed::
+
+    =============================
+    WARNING: suspicious RCU usage
+    -----------------------------
+    block/cfq-iosched.c:2776 suspicious rcu_dereference_protected() usage!
+
+other info that might help us debug this::
+
+    rcu_scheduler_active = 1, debug_locks = 0
+    3 locks held by scsi_scan_6/1552:
+    #0:  (&shost->scan_mutex){+.+.}, at: [<ffffffff8145efca>]
+    scsi_scan_host_selected+0x5a/0x150
+    #1:  (&eq->sysfs_lock){+.+.}, at: [<ffffffff812a5032>]
+    elevator_exit+0x22/0x60
+    #2:  (&(&q->__queue_lock)->rlock){-.-.}, at: [<ffffffff812b6233>]
+    cfq_exit_queue+0x43/0x190
+
+    stack backtrace:
+    Pid: 1552, comm: scsi_scan_6 Not tainted 3.0.0-rc5 #17
+    Call Trace:
+    [<ffffffff810abb9b>] lockdep_rcu_dereference+0xbb/0xc0
+    [<ffffffff812b6139>] __cfq_exit_single_io_context+0xe9/0x120
+    [<ffffffff812b626c>] cfq_exit_queue+0x7c/0x190
+    [<ffffffff812a5046>] elevator_exit+0x36/0x60
+    [<ffffffff812a802a>] blk_cleanup_queue+0x4a/0x60
+    [<ffffffff8145cc09>] scsi_free_queue+0x9/0x10
+    [<ffffffff81460944>] __scsi_remove_device+0x84/0xd0
+    [<ffffffff8145dca3>] scsi_probe_and_add_lun+0x353/0xb10
+    [<ffffffff817da069>] ? error_exit+0x29/0xb0
+    [<ffffffff817d98ed>] ? _raw_spin_unlock_irqrestore+0x3d/0x80
+    [<ffffffff8145e722>] __scsi_scan_target+0x112/0x680
+    [<ffffffff812c690d>] ? trace_hardirqs_off_thunk+0x3a/0x3c
+    [<ffffffff817da069>] ? error_exit+0x29/0xb0
+    [<ffffffff812bcc60>] ? kobject_del+0x40/0x40
+    [<ffffffff8145ed16>] scsi_scan_channel+0x86/0xb0
+    [<ffffffff8145f0b0>] scsi_scan_host_selected+0x140/0x150
+    [<ffffffff8145f149>] do_scsi_scan_host+0x89/0x90
+    [<ffffffff8145f170>] do_scan_async+0x20/0x160
+    [<ffffffff8145f150>] ? do_scsi_scan_host+0x90/0x90
+    [<ffffffff810975b6>] kthread+0xa6/0xb0
+    [<ffffffff817db154>] kernel_thread_helper+0x4/0x10
+    [<ffffffff81066430>] ? finish_task_switch+0x80/0x110
+    [<ffffffff817d9c04>] ? retint_restore_args+0xe/0xe
+    [<ffffffff81097510>] ? __kthread_init_worker+0x70/0x70
+    [<ffffffff817db150>] ? gs_change+0xb/0xb
+
+Line 2776 of block/cfq-iosched.c in v3.0-rc5 is as follows::
+
+	if (rcu_dereference(ioc->ioc_data) == cic) {
+
+This form says that it must be in a plain vanilla RCU read-side critical
+section, but the "other info" list above shows that this is not the
+case.  Instead, we hold three locks, one of which might be RCU related.
+And maybe that lock really does protect this reference.  If so, the fix
+is to inform RCU, perhaps by changing __cfq_exit_single_io_context() to
+take the struct request_queue "q" from cfq_exit_queue() as an argument,
+which would permit us to invoke rcu_dereference_protected as follows::
+
+	if (rcu_dereference_protected(ioc->ioc_data,
+				      lockdep_is_held(&q->queue_lock)) == cic) {
+
+With this change, there would be no lockdep-RCU splat emitted if this
+code was invoked either from within an RCU read-side critical section
+or with the ->queue_lock held.  In particular, this would have suppressed
+the above lockdep-RCU splat because ->queue_lock is held (see #2 in the
+list above).
+
+On the other hand, perhaps we really do need an RCU read-side critical
+section.  In this case, the critical section must span the use of the
+return value from rcu_dereference(), or at least until there is some
+reference count incremented or some such.  One way to handle this is to
+add rcu_read_lock() and rcu_read_unlock() as follows::
+
+	rcu_read_lock();
+	if (rcu_dereference(ioc->ioc_data) == cic) {
+		spin_lock(&ioc->lock);
+		rcu_assign_pointer(ioc->ioc_data, NULL);
+		spin_unlock(&ioc->lock);
+	}
+	rcu_read_unlock();
+
+With this change, the rcu_dereference() is always within an RCU
+read-side critical section, which again would have suppressed the
+above lockdep-RCU splat.
+
+But in this particular case, we don't actually dereference the pointer
+returned from rcu_dereference().  Instead, that pointer is just compared
+to the cic pointer, which means that the rcu_dereference() can be replaced
+by rcu_access_pointer() as follows::
+
+	if (rcu_access_pointer(ioc->ioc_data) == cic) {
+
+Because it is legal to invoke rcu_access_pointer() without protection,
+this change would also suppress the above lockdep-RCU splat.
diff --git a/Documentation/RCU/lockdep-splat.txt b/Documentation/RCU/lockdep-splat.txt
deleted file mode 100644
index b8096316fd11..000000000000
--- a/Documentation/RCU/lockdep-splat.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-Lockdep-RCU was added to the Linux kernel in early 2010
-(http://lwn.net/Articles/371986/).  This facility checks for some common
-misuses of the RCU API, most notably using one of the rcu_dereference()
-family to access an RCU-protected pointer without the proper protection.
-When such misuse is detected, an lockdep-RCU splat is emitted.
-
-The usual cause of a lockdep-RCU slat is someone accessing an
-RCU-protected data structure without either (1) being in the right kind of
-RCU read-side critical section or (2) holding the right update-side lock.
-This problem can therefore be serious: it might result in random memory
-overwriting or worse.  There can of course be false positives, this
-being the real world and all that.
-
-So let's look at an example RCU lockdep splat from 3.0-rc5, one that
-has long since been fixed:
-
-=============================
-WARNING: suspicious RCU usage
------------------------------
-block/cfq-iosched.c:2776 suspicious rcu_dereference_protected() usage!
-
-other info that might help us debug this:
-
-
-rcu_scheduler_active = 1, debug_locks = 0
-3 locks held by scsi_scan_6/1552:
- #0:  (&shost->scan_mutex){+.+.}, at: [<ffffffff8145efca>]
-scsi_scan_host_selected+0x5a/0x150
- #1:  (&eq->sysfs_lock){+.+.}, at: [<ffffffff812a5032>]
-elevator_exit+0x22/0x60
- #2:  (&(&q->__queue_lock)->rlock){-.-.}, at: [<ffffffff812b6233>]
-cfq_exit_queue+0x43/0x190
-
-stack backtrace:
-Pid: 1552, comm: scsi_scan_6 Not tainted 3.0.0-rc5 #17
-Call Trace:
- [<ffffffff810abb9b>] lockdep_rcu_dereference+0xbb/0xc0
- [<ffffffff812b6139>] __cfq_exit_single_io_context+0xe9/0x120
- [<ffffffff812b626c>] cfq_exit_queue+0x7c/0x190
- [<ffffffff812a5046>] elevator_exit+0x36/0x60
- [<ffffffff812a802a>] blk_cleanup_queue+0x4a/0x60
- [<ffffffff8145cc09>] scsi_free_queue+0x9/0x10
- [<ffffffff81460944>] __scsi_remove_device+0x84/0xd0
- [<ffffffff8145dca3>] scsi_probe_and_add_lun+0x353/0xb10
- [<ffffffff817da069>] ? error_exit+0x29/0xb0
- [<ffffffff817d98ed>] ? _raw_spin_unlock_irqrestore+0x3d/0x80
- [<ffffffff8145e722>] __scsi_scan_target+0x112/0x680
- [<ffffffff812c690d>] ? trace_hardirqs_off_thunk+0x3a/0x3c
- [<ffffffff817da069>] ? error_exit+0x29/0xb0
- [<ffffffff812bcc60>] ? kobject_del+0x40/0x40
- [<ffffffff8145ed16>] scsi_scan_channel+0x86/0xb0
- [<ffffffff8145f0b0>] scsi_scan_host_selected+0x140/0x150
- [<ffffffff8145f149>] do_scsi_scan_host+0x89/0x90
- [<ffffffff8145f170>] do_scan_async+0x20/0x160
- [<ffffffff8145f150>] ? do_scsi_scan_host+0x90/0x90
- [<ffffffff810975b6>] kthread+0xa6/0xb0
- [<ffffffff817db154>] kernel_thread_helper+0x4/0x10
- [<ffffffff81066430>] ? finish_task_switch+0x80/0x110
- [<ffffffff817d9c04>] ? retint_restore_args+0xe/0xe
- [<ffffffff81097510>] ? __kthread_init_worker+0x70/0x70
- [<ffffffff817db150>] ? gs_change+0xb/0xb
-
-Line 2776 of block/cfq-iosched.c in v3.0-rc5 is as follows:
-
-	if (rcu_dereference(ioc->ioc_data) == cic) {
-
-This form says that it must be in a plain vanilla RCU read-side critical
-section, but the "other info" list above shows that this is not the
-case.  Instead, we hold three locks, one of which might be RCU related.
-And maybe that lock really does protect this reference.  If so, the fix
-is to inform RCU, perhaps by changing __cfq_exit_single_io_context() to
-take the struct request_queue "q" from cfq_exit_queue() as an argument,
-which would permit us to invoke rcu_dereference_protected as follows:
-
-	if (rcu_dereference_protected(ioc->ioc_data,
-				      lockdep_is_held(&q->queue_lock)) == cic) {
-
-With this change, there would be no lockdep-RCU splat emitted if this
-code was invoked either from within an RCU read-side critical section
-or with the ->queue_lock held.  In particular, this would have suppressed
-the above lockdep-RCU splat because ->queue_lock is held (see #2 in the
-list above).
-
-On the other hand, perhaps we really do need an RCU read-side critical
-section.  In this case, the critical section must span the use of the
-return value from rcu_dereference(), or at least until there is some
-reference count incremented or some such.  One way to handle this is to
-add rcu_read_lock() and rcu_read_unlock() as follows:
-
-	rcu_read_lock();
-	if (rcu_dereference(ioc->ioc_data) == cic) {
-		spin_lock(&ioc->lock);
-		rcu_assign_pointer(ioc->ioc_data, NULL);
-		spin_unlock(&ioc->lock);
-	}
-	rcu_read_unlock();
-
-With this change, the rcu_dereference() is always within an RCU
-read-side critical section, which again would have suppressed the
-above lockdep-RCU splat.
-
-But in this particular case, we don't actually dereference the pointer
-returned from rcu_dereference().  Instead, that pointer is just compared
-to the cic pointer, which means that the rcu_dereference() can be replaced
-by rcu_access_pointer() as follows:
-
-	if (rcu_access_pointer(ioc->ioc_data) == cic) {
-
-Because it is legal to invoke rcu_access_pointer() without protection,
-this change would also suppress the above lockdep-RCU splat.
diff --git a/Documentation/RCU/lockdep.rst b/Documentation/RCU/lockdep.rst
new file mode 100644
index 000000000000..f1fc8ae3846a
--- /dev/null
+++ b/Documentation/RCU/lockdep.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+RCU and lockdep checking
+========================
+
+All flavors of RCU have lockdep checking available, so that lockdep is
+aware of when each task enters and leaves any flavor of RCU read-side
+critical section.  Each flavor of RCU is tracked separately (but note
+that this is not the case in 2.6.32 and earlier).  This allows lockdep's
+tracking to include RCU state, which can sometimes help when debugging
+deadlocks and the like.
+
+In addition, RCU provides the following primitives that check lockdep's
+state::
+
+	rcu_read_lock_held() for normal RCU.
+	rcu_read_lock_bh_held() for RCU-bh.
+	rcu_read_lock_sched_held() for RCU-sched.
+	srcu_read_lock_held() for SRCU.
+
+These functions are conservative, and will therefore return 1 if they
+aren't certain (for example, if CONFIG_DEBUG_LOCK_ALLOC is not set).
+This prevents things like WARN_ON(!rcu_read_lock_held()) from giving false
+positives when lockdep is disabled.
+
+In addition, a separate kernel config parameter CONFIG_PROVE_RCU enables
+checking of rcu_dereference() primitives:
+
+	rcu_dereference(p):
+		Check for RCU read-side critical section.
+	rcu_dereference_bh(p):
+		Check for RCU-bh read-side critical section.
+	rcu_dereference_sched(p):
+		Check for RCU-sched read-side critical section.
+	srcu_dereference(p, sp):
+		Check for SRCU read-side critical section.
+	rcu_dereference_check(p, c):
+		Use explicit check expression "c" along with
+		rcu_read_lock_held().  This is useful in code that is
+		invoked by both RCU readers and updaters.
+	rcu_dereference_bh_check(p, c):
+		Use explicit check expression "c" along with
+		rcu_read_lock_bh_held().  This is useful in code that
+		is invoked by both RCU-bh readers and updaters.
+	rcu_dereference_sched_check(p, c):
+		Use explicit check expression "c" along with
+		rcu_read_lock_sched_held().  This is useful in code that
+		is invoked by both RCU-sched readers and updaters.
+	srcu_dereference_check(p, c):
+		Use explicit check expression "c" along with
+		srcu_read_lock_held()().  This is useful in code that
+		is invoked by both SRCU readers and updaters.
+	rcu_dereference_raw(p):
+		Don't check.  (Use sparingly, if at all.)
+	rcu_dereference_protected(p, c):
+		Use explicit check expression "c", and omit all barriers
+		and compiler constraints.  This is useful when the data
+		structure cannot change, for example, in code that is
+		invoked only by updaters.
+	rcu_access_pointer(p):
+		Return the value of the pointer and omit all barriers,
+		but retain the compiler constraints that prevent duplicating
+		or coalescsing.  This is useful when when testing the
+		value of the pointer itself, for example, against NULL.
+
+The rcu_dereference_check() check expression can be any boolean
+expression, but would normally include a lockdep expression.  However,
+any boolean expression can be used.  For a moderately ornate example,
+consider the following::
+
+	file = rcu_dereference_check(fdt->fd[fd],
+				     lockdep_is_held(&files->file_lock) ||
+				     atomic_read(&files->count) == 1);
+
+This expression picks up the pointer "fdt->fd[fd]" in an RCU-safe manner,
+and, if CONFIG_PROVE_RCU is configured, verifies that this expression
+is used in:
+
+1.	An RCU read-side critical section (implicit), or
+2.	with files->file_lock held, or
+3.	on an unshared files_struct.
+
+In case (1), the pointer is picked up in an RCU-safe manner for vanilla
+RCU read-side critical sections, in case (2) the ->file_lock prevents
+any change from taking place, and finally, in case (3) the current task
+is the only task accessing the file_struct, again preventing any change
+from taking place.  If the above statement was invoked only from updater
+code, it could instead be written as follows::
+
+	file = rcu_dereference_protected(fdt->fd[fd],
+					 lockdep_is_held(&files->file_lock) ||
+					 atomic_read(&files->count) == 1);
+
+This would verify cases #2 and #3 above, and furthermore lockdep would
+complain if this was used in an RCU read-side critical section unless one
+of these two cases held.  Because rcu_dereference_protected() omits all
+barriers and compiler constraints, it generates better code than do the
+other flavors of rcu_dereference().  On the other hand, it is illegal
+to use rcu_dereference_protected() if either the RCU-protected pointer
+or the RCU-protected data that it points to can change concurrently.
+
+Like rcu_dereference(), when lockdep is enabled, RCU list and hlist
+traversal primitives check for being called from within an RCU read-side
+critical section.  However, a lockdep expression can be passed to them
+as a additional optional argument.  With this lockdep expression, these
+traversal primitives will complain only if the lockdep expression is
+false and they are called from outside any RCU read-side critical section.
+
+For example, the workqueue for_each_pwq() macro is intended to be used
+either within an RCU read-side critical section or with wq->mutex held.
+It is thus implemented as follows::
+
+	#define for_each_pwq(pwq, wq)
+		list_for_each_entry_rcu((pwq), &(wq)->pwqs, pwqs_node,
+					lock_is_held(&(wq->mutex).dep_map))
diff --git a/Documentation/RCU/lockdep.txt b/Documentation/RCU/lockdep.txt
deleted file mode 100644
index 89db949eeca0..000000000000
--- a/Documentation/RCU/lockdep.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-RCU and lockdep checking
-
-All flavors of RCU have lockdep checking available, so that lockdep is
-aware of when each task enters and leaves any flavor of RCU read-side
-critical section.  Each flavor of RCU is tracked separately (but note
-that this is not the case in 2.6.32 and earlier).  This allows lockdep's
-tracking to include RCU state, which can sometimes help when debugging
-deadlocks and the like.
-
-In addition, RCU provides the following primitives that check lockdep's
-state:
-
-	rcu_read_lock_held() for normal RCU.
-	rcu_read_lock_bh_held() for RCU-bh.
-	rcu_read_lock_sched_held() for RCU-sched.
-	srcu_read_lock_held() for SRCU.
-
-These functions are conservative, and will therefore return 1 if they
-aren't certain (for example, if CONFIG_DEBUG_LOCK_ALLOC is not set).
-This prevents things like WARN_ON(!rcu_read_lock_held()) from giving false
-positives when lockdep is disabled.
-
-In addition, a separate kernel config parameter CONFIG_PROVE_RCU enables
-checking of rcu_dereference() primitives:
-
-	rcu_dereference(p):
-		Check for RCU read-side critical section.
-	rcu_dereference_bh(p):
-		Check for RCU-bh read-side critical section.
-	rcu_dereference_sched(p):
-		Check for RCU-sched read-side critical section.
-	srcu_dereference(p, sp):
-		Check for SRCU read-side critical section.
-	rcu_dereference_check(p, c):
-		Use explicit check expression "c" along with
-		rcu_read_lock_held().  This is useful in code that is
-		invoked by both RCU readers and updaters.
-	rcu_dereference_bh_check(p, c):
-		Use explicit check expression "c" along with
-		rcu_read_lock_bh_held().  This is useful in code that
-		is invoked by both RCU-bh readers and updaters.
-	rcu_dereference_sched_check(p, c):
-		Use explicit check expression "c" along with
-		rcu_read_lock_sched_held().  This is useful in code that
-		is invoked by both RCU-sched readers and updaters.
-	srcu_dereference_check(p, c):
-		Use explicit check expression "c" along with
-		srcu_read_lock_held()().  This is useful in code that
-		is invoked by both SRCU readers and updaters.
-	rcu_dereference_raw(p):
-		Don't check.  (Use sparingly, if at all.)
-	rcu_dereference_protected(p, c):
-		Use explicit check expression "c", and omit all barriers
-		and compiler constraints.  This is useful when the data
-		structure cannot change, for example, in code that is
-		invoked only by updaters.
-	rcu_access_pointer(p):
-		Return the value of the pointer and omit all barriers,
-		but retain the compiler constraints that prevent duplicating
-		or coalescsing.  This is useful when when testing the
-		value of the pointer itself, for example, against NULL.
-
-The rcu_dereference_check() check expression can be any boolean
-expression, but would normally include a lockdep expression.  However,
-any boolean expression can be used.  For a moderately ornate example,
-consider the following:
-
-	file = rcu_dereference_check(fdt->fd[fd],
-				     lockdep_is_held(&files->file_lock) ||
-				     atomic_read(&files->count) == 1);
-
-This expression picks up the pointer "fdt->fd[fd]" in an RCU-safe manner,
-and, if CONFIG_PROVE_RCU is configured, verifies that this expression
-is used in:
-
-1.	An RCU read-side critical section (implicit), or
-2.	with files->file_lock held, or
-3.	on an unshared files_struct.
-
-In case (1), the pointer is picked up in an RCU-safe manner for vanilla
-RCU read-side critical sections, in case (2) the ->file_lock prevents
-any change from taking place, and finally, in case (3) the current task
-is the only task accessing the file_struct, again preventing any change
-from taking place.  If the above statement was invoked only from updater
-code, it could instead be written as follows:
-
-	file = rcu_dereference_protected(fdt->fd[fd],
-					 lockdep_is_held(&files->file_lock) ||
-					 atomic_read(&files->count) == 1);
-
-This would verify cases #2 and #3 above, and furthermore lockdep would
-complain if this was used in an RCU read-side critical section unless one
-of these two cases held.  Because rcu_dereference_protected() omits all
-barriers and compiler constraints, it generates better code than do the
-other flavors of rcu_dereference().  On the other hand, it is illegal
-to use rcu_dereference_protected() if either the RCU-protected pointer
-or the RCU-protected data that it points to can change concurrently.
-
-Like rcu_dereference(), when lockdep is enabled, RCU list and hlist
-traversal primitives check for being called from within an RCU read-side
-critical section.  However, a lockdep expression can be passed to them
-as a additional optional argument.  With this lockdep expression, these
-traversal primitives will complain only if the lockdep expression is
-false and they are called from outside any RCU read-side critical section.
-
-For example, the workqueue for_each_pwq() macro is intended to be used
-either within an RCU read-side critical section or with wq->mutex held.
-It is thus implemented as follows:
-
-	#define for_each_pwq(pwq, wq)
-		list_for_each_entry_rcu((pwq), &(wq)->pwqs, pwqs_node,
-					lock_is_held(&(wq->mutex).dep_map))
diff --git a/Documentation/RCU/rculist_nulls.rst b/Documentation/RCU/rculist_nulls.rst
new file mode 100644
index 000000000000..a9fc774bc400
--- /dev/null
+++ b/Documentation/RCU/rculist_nulls.rst
@@ -0,0 +1,200 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================================
+Using RCU hlist_nulls to protect list and objects
+=================================================
+
+This section describes how to use hlist_nulls to
+protect read-mostly linked lists and
+objects using SLAB_TYPESAFE_BY_RCU allocations.
+
+Please read the basics in Documentation/RCU/listRCU.rst
+
+Using 'nulls'
+=============
+
+Using special makers (called 'nulls') is a convenient way
+to solve following problem :
+
+A typical RCU linked list managing objects which are
+allocated with SLAB_TYPESAFE_BY_RCU kmem_cache can
+use following algos :
+
+1) Lookup algo
+--------------
+
+::
+
+  rcu_read_lock()
+  begin:
+  obj = lockless_lookup(key);
+  if (obj) {
+    if (!try_get_ref(obj)) // might fail for free objects
+      goto begin;
+    /*
+    * Because a writer could delete object, and a writer could
+    * reuse these object before the RCU grace period, we
+    * must check key after getting the reference on object
+    */
+    if (obj->key != key) { // not the object we expected
+      put_ref(obj);
+      goto begin;
+    }
+  }
+  rcu_read_unlock();
+
+Beware that lockless_lookup(key) cannot use traditional hlist_for_each_entry_rcu()
+but a version with an additional memory barrier (smp_rmb())
+
+::
+
+  lockless_lookup(key)
+  {
+    struct hlist_node *node, *next;
+    for (pos = rcu_dereference((head)->first);
+        pos && ({ next = pos->next; smp_rmb(); prefetch(next); 1; }) &&
+        ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
+        pos = rcu_dereference(next))
+      if (obj->key == key)
+        return obj;
+    return NULL;
+  }
+
+And note the traditional hlist_for_each_entry_rcu() misses this smp_rmb()::
+
+  struct hlist_node *node;
+  for (pos = rcu_dereference((head)->first);
+        pos && ({ prefetch(pos->next); 1; }) &&
+        ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
+        pos = rcu_dereference(pos->next))
+   if (obj->key == key)
+     return obj;
+  return NULL;
+
+Quoting Corey Minyard::
+
+  "If the object is moved from one list to another list in-between the
+  time the hash is calculated and the next field is accessed, and the
+  object has moved to the end of a new list, the traversal will not
+  complete properly on the list it should have, since the object will
+  be on the end of the new list and there's not a way to tell it's on a
+  new list and restart the list traversal. I think that this can be
+  solved by pre-fetching the "next" field (with proper barriers) before
+  checking the key."
+
+2) Insert algo
+--------------
+
+We need to make sure a reader cannot read the new 'obj->obj_next' value
+and previous value of 'obj->key'. Or else, an item could be deleted
+from a chain, and inserted into another chain. If new chain was empty
+before the move, 'next' pointer is NULL, and lockless reader can
+not detect it missed following items in original chain.
+
+::
+
+  /*
+  * Please note that new inserts are done at the head of list,
+  * not in the middle or end.
+  */
+  obj = kmem_cache_alloc(...);
+  lock_chain(); // typically a spin_lock()
+  obj->key = key;
+  /*
+  * we need to make sure obj->key is updated before obj->next
+  * or obj->refcnt
+  */
+  smp_wmb();
+  atomic_set(&obj->refcnt, 1);
+  hlist_add_head_rcu(&obj->obj_node, list);
+  unlock_chain(); // typically a spin_unlock()
+
+
+3) Remove algo
+--------------
+Nothing special here, we can use a standard RCU hlist deletion.
+But thanks to SLAB_TYPESAFE_BY_RCU, beware a deleted object can be reused
+very very fast (before the end of RCU grace period)
+
+::
+
+  if (put_last_reference_on(obj) {
+    lock_chain(); // typically a spin_lock()
+    hlist_del_init_rcu(&obj->obj_node);
+    unlock_chain(); // typically a spin_unlock()
+    kmem_cache_free(cachep, obj);
+  }
+
+
+
+--------------------------------------------------------------------------
+
+Avoiding extra smp_rmb()
+========================
+
+With hlist_nulls we can avoid extra smp_rmb() in lockless_lookup()
+and extra smp_wmb() in insert function.
+
+For example, if we choose to store the slot number as the 'nulls'
+end-of-list marker for each slot of the hash table, we can detect
+a race (some writer did a delete and/or a move of an object
+to another chain) checking the final 'nulls' value if
+the lookup met the end of chain. If final 'nulls' value
+is not the slot number, then we must restart the lookup at
+the beginning. If the object was moved to the same chain,
+then the reader doesn't care : It might eventually
+scan the list again without harm.
+
+
+1) lookup algo
+--------------
+
+::
+
+  head = &table[slot];
+  rcu_read_lock();
+  begin:
+  hlist_nulls_for_each_entry_rcu(obj, node, head, member) {
+    if (obj->key == key) {
+      if (!try_get_ref(obj)) // might fail for free objects
+        goto begin;
+      if (obj->key != key) { // not the object we expected
+        put_ref(obj);
+        goto begin;
+      }
+    goto out;
+  }
+  /*
+  * if the nulls value we got at the end of this lookup is
+  * not the expected one, we must restart lookup.
+  * We probably met an item that was moved to another chain.
+  */
+  if (get_nulls_value(node) != slot)
+  goto begin;
+  obj = NULL;
+
+  out:
+  rcu_read_unlock();
+
+2) Insert function
+------------------
+
+::
+
+  /*
+  * Please note that new inserts are done at the head of list,
+  * not in the middle or end.
+  */
+  obj = kmem_cache_alloc(cachep);
+  lock_chain(); // typically a spin_lock()
+  obj->key = key;
+  /*
+  * changes to obj->key must be visible before refcnt one
+  */
+  smp_wmb();
+  atomic_set(&obj->refcnt, 1);
+  /*
+  * insert obj in RCU way (readers might be traversing chain)
+  */
+  hlist_nulls_add_head_rcu(&obj->obj_node, list);
+  unlock_chain(); // typically a spin_unlock()
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
deleted file mode 100644
index 23f115dc87cf..000000000000
--- a/Documentation/RCU/rculist_nulls.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-Using hlist_nulls to protect read-mostly linked lists and
-objects using SLAB_TYPESAFE_BY_RCU allocations.
-
-Please read the basics in Documentation/RCU/listRCU.rst
-
-Using special makers (called 'nulls') is a convenient way
-to solve following problem :
-
-A typical RCU linked list managing objects which are
-allocated with SLAB_TYPESAFE_BY_RCU kmem_cache can
-use following algos :
-
-1) Lookup algo
---------------
-rcu_read_lock()
-begin:
-obj = lockless_lookup(key);
-if (obj) {
-  if (!try_get_ref(obj)) // might fail for free objects
-    goto begin;
-  /*
-   * Because a writer could delete object, and a writer could
-   * reuse these object before the RCU grace period, we
-   * must check key after getting the reference on object
-   */
-  if (obj->key != key) { // not the object we expected
-     put_ref(obj);
-     goto begin;
-   }
-}
-rcu_read_unlock();
-
-Beware that lockless_lookup(key) cannot use traditional hlist_for_each_entry_rcu()
-but a version with an additional memory barrier (smp_rmb())
-
-lockless_lookup(key)
-{
-   struct hlist_node *node, *next;
-   for (pos = rcu_dereference((head)->first);
-          pos && ({ next = pos->next; smp_rmb(); prefetch(next); 1; }) &&
-          ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
-          pos = rcu_dereference(next))
-      if (obj->key == key)
-         return obj;
-   return NULL;
-
-And note the traditional hlist_for_each_entry_rcu() misses this smp_rmb() :
-
-   struct hlist_node *node;
-   for (pos = rcu_dereference((head)->first);
-		pos && ({ prefetch(pos->next); 1; }) &&
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
-		pos = rcu_dereference(pos->next))
-      if (obj->key == key)
-         return obj;
-   return NULL;
-}
-
-Quoting Corey Minyard :
-
-"If the object is moved from one list to another list in-between the
- time the hash is calculated and the next field is accessed, and the
- object has moved to the end of a new list, the traversal will not
- complete properly on the list it should have, since the object will
- be on the end of the new list and there's not a way to tell it's on a
- new list and restart the list traversal.  I think that this can be
- solved by pre-fetching the "next" field (with proper barriers) before
- checking the key."
-
-2) Insert algo :
-----------------
-
-We need to make sure a reader cannot read the new 'obj->obj_next' value
-and previous value of 'obj->key'. Or else, an item could be deleted
-from a chain, and inserted into another chain. If new chain was empty
-before the move, 'next' pointer is NULL, and lockless reader can
-not detect it missed following items in original chain.
-
-/*
- * Please note that new inserts are done at the head of list,
- * not in the middle or end.
- */
-obj = kmem_cache_alloc(...);
-lock_chain(); // typically a spin_lock()
-obj->key = key;
-/*
- * we need to make sure obj->key is updated before obj->next
- * or obj->refcnt
- */
-smp_wmb();
-atomic_set(&obj->refcnt, 1);
-hlist_add_head_rcu(&obj->obj_node, list);
-unlock_chain(); // typically a spin_unlock()
-
-
-3) Remove algo
---------------
-Nothing special here, we can use a standard RCU hlist deletion.
-But thanks to SLAB_TYPESAFE_BY_RCU, beware a deleted object can be reused
-very very fast (before the end of RCU grace period)
-
-if (put_last_reference_on(obj) {
-   lock_chain(); // typically a spin_lock()
-   hlist_del_init_rcu(&obj->obj_node);
-   unlock_chain(); // typically a spin_unlock()
-   kmem_cache_free(cachep, obj);
-}
-
-
-
---------------------------------------------------------------------------
-With hlist_nulls we can avoid extra smp_rmb() in lockless_lookup()
-and extra smp_wmb() in insert function.
-
-For example, if we choose to store the slot number as the 'nulls'
-end-of-list marker for each slot of the hash table, we can detect
-a race (some writer did a delete and/or a move of an object
-to another chain) checking the final 'nulls' value if
-the lookup met the end of chain. If final 'nulls' value
-is not the slot number, then we must restart the lookup at
-the beginning. If the object was moved to the same chain,
-then the reader doesn't care : It might eventually
-scan the list again without harm.
-
-
-1) lookup algo
-
- head = &table[slot];
- rcu_read_lock();
-begin:
- hlist_nulls_for_each_entry_rcu(obj, node, head, member) {
-   if (obj->key == key) {
-      if (!try_get_ref(obj)) // might fail for free objects
-         goto begin;
-      if (obj->key != key) { // not the object we expected
-         put_ref(obj);
-         goto begin;
-      }
-  goto out;
- }
-/*
- * if the nulls value we got at the end of this lookup is
- * not the expected one, we must restart lookup.
- * We probably met an item that was moved to another chain.
- */
- if (get_nulls_value(node) != slot)
-   goto begin;
- obj = NULL;
-
-out:
- rcu_read_unlock();
-
-2) Insert function :
---------------------
-
-/*
- * Please note that new inserts are done at the head of list,
- * not in the middle or end.
- */
-obj = kmem_cache_alloc(cachep);
-lock_chain(); // typically a spin_lock()
-obj->key = key;
-/*
- * changes to obj->key must be visible before refcnt one
- */
-smp_wmb();
-atomic_set(&obj->refcnt, 1);
-/*
- * insert obj in RCU way (readers might be traversing chain)
- */
-hlist_nulls_add_head_rcu(&obj->obj_node, list);
-unlock_chain(); // typically a spin_unlock()
diff --git a/Documentation/RCU/rcuref.rst b/Documentation/RCU/rcuref.rst
new file mode 100644
index 000000000000..b33aeb14fde3
--- /dev/null
+++ b/Documentation/RCU/rcuref.rst
@@ -0,0 +1,158 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================================================
+Reference-count design for elements of lists/arrays protected by RCU
+====================================================================
+
+
+Please note that the percpu-ref feature is likely your first
+stop if you need to combine reference counts and RCU.  Please see
+include/linux/percpu-refcount.h for more information.  However, in
+those unusual cases where percpu-ref would consume too much memory,
+please read on.
+
+------------------------------------------------------------------------
+
+Reference counting on elements of lists which are protected by traditional
+reader/writer spinlocks or semaphores are straightforward:
+
+CODE LISTING A::
+
+    1.					    2.
+    add()				    search_and_reference()
+    {					    {
+	alloc_object				read_lock(&list_lock);
+	...					search_for_element
+	atomic_set(&el->rc, 1);			atomic_inc(&el->rc);
+	write_lock(&list_lock);			 ...
+	add_element				read_unlock(&list_lock);
+	...					...
+	write_unlock(&list_lock);	   }
+    }
+
+    3.					    4.
+    release_referenced()		    delete()
+    {					    {
+	...					write_lock(&list_lock);
+	if(atomic_dec_and_test(&el->rc))	...
+	    kfree(el);
+	...					remove_element
+    }						write_unlock(&list_lock);
+						...
+						if (atomic_dec_and_test(&el->rc))
+						    kfree(el);
+						...
+					    }
+
+If this list/array is made lock free using RCU as in changing the
+write_lock() in add() and delete() to spin_lock() and changing read_lock()
+in search_and_reference() to rcu_read_lock(), the atomic_inc() in
+search_and_reference() could potentially hold reference to an element which
+has already been deleted from the list/array.  Use atomic_inc_not_zero()
+in this scenario as follows:
+
+CODE LISTING B::
+
+    1.					    2.
+    add()				    search_and_reference()
+    {					    {
+	alloc_object				rcu_read_lock();
+	...					search_for_element
+	atomic_set(&el->rc, 1);			if (!atomic_inc_not_zero(&el->rc)) {
+	spin_lock(&list_lock);			    rcu_read_unlock();
+						    return FAIL;
+	add_element				}
+	...					...
+	spin_unlock(&list_lock);		rcu_read_unlock();
+    }					    }
+    3.					    4.
+    release_referenced()		    delete()
+    {					    {
+	...					spin_lock(&list_lock);
+	if (atomic_dec_and_test(&el->rc))	...
+	    call_rcu(&el->head, el_free);	remove_element
+	...					spin_unlock(&list_lock);
+    }						...
+						if (atomic_dec_and_test(&el->rc))
+						    call_rcu(&el->head, el_free);
+						...
+					    }
+
+Sometimes, a reference to the element needs to be obtained in the
+update (write) stream.	In such cases, atomic_inc_not_zero() might be
+overkill, since we hold the update-side spinlock.  One might instead
+use atomic_inc() in such cases.
+
+It is not always convenient to deal with "FAIL" in the
+search_and_reference() code path.  In such cases, the
+atomic_dec_and_test() may be moved from delete() to el_free()
+as follows:
+
+CODE LISTING C::
+
+    1.					    2.
+    add()				    search_and_reference()
+    {					    {
+	alloc_object				rcu_read_lock();
+	...					search_for_element
+	atomic_set(&el->rc, 1);			atomic_inc(&el->rc);
+	spin_lock(&list_lock);			...
+
+	add_element				rcu_read_unlock();
+	...				    }
+	spin_unlock(&list_lock);	    4.
+    }					    delete()
+    3.					    {
+    release_referenced()			spin_lock(&list_lock);
+    {						...
+	...					remove_element
+	if (atomic_dec_and_test(&el->rc))	spin_unlock(&list_lock);
+	    kfree(el);				...
+	...					call_rcu(&el->head, el_free);
+    }						...
+    5.					    }
+    void el_free(struct rcu_head *rhp)
+    {
+	release_referenced();
+    }
+
+The key point is that the initial reference added by add() is not removed
+until after a grace period has elapsed following removal.  This means that
+search_and_reference() cannot find this element, which means that the value
+of el->rc cannot increase.  Thus, once it reaches zero, there are no
+readers that can or ever will be able to reference the element.	 The
+element can therefore safely be freed.	This in turn guarantees that if
+any reader finds the element, that reader may safely acquire a reference
+without checking the value of the reference counter.
+
+A clear advantage of the RCU-based pattern in listing C over the one
+in listing B is that any call to search_and_reference() that locates
+a given object will succeed in obtaining a reference to that object,
+even given a concurrent invocation of delete() for that same object.
+Similarly, a clear advantage of both listings B and C over listing A is
+that a call to delete() is not delayed even if there are an arbitrarily
+large number of calls to search_and_reference() searching for the same
+object that delete() was invoked on.  Instead, all that is delayed is
+the eventual invocation of kfree(), which is usually not a problem on
+modern computer systems, even the small ones.
+
+In cases where delete() can sleep, synchronize_rcu() can be called from
+delete(), so that el_free() can be subsumed into delete as follows::
+
+    4.
+    delete()
+    {
+	spin_lock(&list_lock);
+	...
+	remove_element
+	spin_unlock(&list_lock);
+	...
+	synchronize_rcu();
+	if (atomic_dec_and_test(&el->rc))
+	    kfree(el);
+	...
+    }
+
+As additional examples in the kernel, the pattern in listing C is used by
+reference counting of struct pid, while the pattern in listing B is used by
+struct posix_acl.
diff --git a/Documentation/RCU/rcuref.txt b/Documentation/RCU/rcuref.txt
deleted file mode 100644
index 5e6429d66c24..000000000000
--- a/Documentation/RCU/rcuref.txt
+++ /dev/null
@@ -1,151 +0,0 @@
-Reference-count design for elements of lists/arrays protected by RCU.
-
-
-Please note that the percpu-ref feature is likely your first
-stop if you need to combine reference counts and RCU.  Please see
-include/linux/percpu-refcount.h for more information.  However, in
-those unusual cases where percpu-ref would consume too much memory,
-please read on.
-
-------------------------------------------------------------------------
-
-Reference counting on elements of lists which are protected by traditional
-reader/writer spinlocks or semaphores are straightforward:
-
-CODE LISTING A:
-1.				2.
-add()				search_and_reference()
-{				{
-    alloc_object		    read_lock(&list_lock);
-    ...				    search_for_element
-    atomic_set(&el->rc, 1);	    atomic_inc(&el->rc);
-    write_lock(&list_lock);	     ...
-    add_element			    read_unlock(&list_lock);
-    ...				    ...
-    write_unlock(&list_lock);	}
-}
-
-3.					4.
-release_referenced()			delete()
-{					{
-    ...					    write_lock(&list_lock);
-    if(atomic_dec_and_test(&el->rc))	    ...
-	kfree(el);
-    ...					    remove_element
-}					    write_unlock(&list_lock);
- 					    ...
-					    if (atomic_dec_and_test(&el->rc))
-					        kfree(el);
-					    ...
-					}
-
-If this list/array is made lock free using RCU as in changing the
-write_lock() in add() and delete() to spin_lock() and changing read_lock()
-in search_and_reference() to rcu_read_lock(), the atomic_inc() in
-search_and_reference() could potentially hold reference to an element which
-has already been deleted from the list/array.  Use atomic_inc_not_zero()
-in this scenario as follows:
-
-CODE LISTING B:
-1.					2.
-add()					search_and_reference()
-{					{
-    alloc_object			    rcu_read_lock();
-    ...					    search_for_element
-    atomic_set(&el->rc, 1);		    if (!atomic_inc_not_zero(&el->rc)) {
-    spin_lock(&list_lock);		        rcu_read_unlock();
-					        return FAIL;
-    add_element				    }
-    ...					    ...
-    spin_unlock(&list_lock);		    rcu_read_unlock();
-}					}
-3.					4.
-release_referenced()			delete()
-{					{
-    ...					    spin_lock(&list_lock);
-    if (atomic_dec_and_test(&el->rc))       ...
-        call_rcu(&el->head, el_free);       remove_element
-    ...                                     spin_unlock(&list_lock);
-} 					    ...
-					    if (atomic_dec_and_test(&el->rc))
-					        call_rcu(&el->head, el_free);
-					    ...
-					}
-
-Sometimes, a reference to the element needs to be obtained in the
-update (write) stream.  In such cases, atomic_inc_not_zero() might be
-overkill, since we hold the update-side spinlock.  One might instead
-use atomic_inc() in such cases.
-
-It is not always convenient to deal with "FAIL" in the
-search_and_reference() code path.  In such cases, the
-atomic_dec_and_test() may be moved from delete() to el_free()
-as follows:
-
-CODE LISTING C:
-1.					2.
-add()					search_and_reference()
-{					{
-    alloc_object			    rcu_read_lock();
-    ...					    search_for_element
-    atomic_set(&el->rc, 1);		    atomic_inc(&el->rc);
-    spin_lock(&list_lock);		    ...
-
-    add_element				    rcu_read_unlock();
-    ...					}
-    spin_unlock(&list_lock);		4.
-}					delete()
-3.					{
-release_referenced()			    spin_lock(&list_lock);
-{					    ...
-    ...					    remove_element
-    if (atomic_dec_and_test(&el->rc))       spin_unlock(&list_lock);
-        kfree(el);			    ...
-    ...                                     call_rcu(&el->head, el_free);
-} 					    ...
-5.					}
-void el_free(struct rcu_head *rhp)
-{
-    release_referenced();
-}
-
-The key point is that the initial reference added by add() is not removed
-until after a grace period has elapsed following removal.  This means that
-search_and_reference() cannot find this element, which means that the value
-of el->rc cannot increase.  Thus, once it reaches zero, there are no
-readers that can or ever will be able to reference the element.  The
-element can therefore safely be freed.  This in turn guarantees that if
-any reader finds the element, that reader may safely acquire a reference
-without checking the value of the reference counter.
-
-A clear advantage of the RCU-based pattern in listing C over the one
-in listing B is that any call to search_and_reference() that locates
-a given object will succeed in obtaining a reference to that object,
-even given a concurrent invocation of delete() for that same object.
-Similarly, a clear advantage of both listings B and C over listing A is
-that a call to delete() is not delayed even if there are an arbitrarily
-large number of calls to search_and_reference() searching for the same
-object that delete() was invoked on.  Instead, all that is delayed is
-the eventual invocation of kfree(), which is usually not a problem on
-modern computer systems, even the small ones.
-
-In cases where delete() can sleep, synchronize_rcu() can be called from
-delete(), so that el_free() can be subsumed into delete as follows:
-
-4.
-delete()
-{
-    spin_lock(&list_lock);
-    ...
-    remove_element
-    spin_unlock(&list_lock);
-    ...
-    synchronize_rcu();
-    if (atomic_dec_and_test(&el->rc))
-    	kfree(el);
-    ...
-}
-
-As additional examples in the kernel, the pattern in listing C is used by
-reference counting of struct pid, while the pattern in listing B is used by
-struct posix_acl.
diff --git a/Documentation/RCU/stallwarn.rst b/Documentation/RCU/stallwarn.rst
new file mode 100644
index 000000000000..08bc9aec4606
--- /dev/null
+++ b/Documentation/RCU/stallwarn.rst
@@ -0,0 +1,329 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+Using RCU's CPU Stall Detector
+==============================
+
+This document first discusses what sorts of issues RCU's CPU stall
+detector can locate, and then discusses kernel parameters and Kconfig
+options that can be used to fine-tune the detector's operation.  Finally,
+this document explains the stall detector's "splat" format.
+
+
+What Causes RCU CPU Stall Warnings?
+===================================
+
+So your kernel printed an RCU CPU stall warning.  The next question is
+"What caused it?"  The following problems can result in RCU CPU stall
+warnings:
+
+-	A CPU looping in an RCU read-side critical section.
+
+-	A CPU looping with interrupts disabled.
+
+-	A CPU looping with preemption disabled.
+
+-	A CPU looping with bottom halves disabled.
+
+-	For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
+	without invoking schedule().  If the looping in the kernel is
+	really expected and desirable behavior, you might need to add
+	some calls to cond_resched().
+
+-	Booting Linux using a console connection that is too slow to
+	keep up with the boot-time console-message rate.  For example,
+	a 115Kbaud serial console can be -way- too slow to keep up
+	with boot-time message rates, and will frequently result in
+	RCU CPU stall warning messages.  Especially if you have added
+	debug printk()s.
+
+-	Anything that prevents RCU's grace-period kthreads from running.
+	This can result in the "All QSes seen" console-log message.
+	This message will include information on when the kthread last
+	ran and how often it should be expected to run.  It can also
+	result in the ``rcu_.*kthread starved for`` console-log message,
+	which will include additional debugging information.
+
+-	A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
+	happen to preempt a low-priority task in the middle of an RCU
+	read-side critical section.   This is especially damaging if
+	that low-priority task is not permitted to run on any other CPU,
+	in which case the next RCU grace period can never complete, which
+	will eventually cause the system to run out of memory and hang.
+	While the system is in the process of running itself out of
+	memory, you might see stall-warning messages.
+
+-	A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
+	is running at a higher priority than the RCU softirq threads.
+	This will prevent RCU callbacks from ever being invoked,
+	and in a CONFIG_PREEMPT_RCU kernel will further prevent
+	RCU grace periods from ever completing.  Either way, the
+	system will eventually run out of memory and hang.  In the
+	CONFIG_PREEMPT_RCU case, you might see stall-warning
+	messages.
+
+	You can use the rcutree.kthread_prio kernel boot parameter to
+	increase the scheduling priority of RCU's kthreads, which can
+	help avoid this problem.  However, please note that doing this
+	can increase your system's context-switch rate and thus degrade
+	performance.
+
+-	A periodic interrupt whose handler takes longer than the time
+	interval between successive pairs of interrupts.  This can
+	prevent RCU's kthreads and softirq handlers from running.
+	Note that certain high-overhead debugging options, for example
+	the function_graph tracer, can result in interrupt handler taking
+	considerably longer than normal, which can in turn result in
+	RCU CPU stall warnings.
+
+-	Testing a workload on a fast system, tuning the stall-warning
+	timeout down to just barely avoid RCU CPU stall warnings, and then
+	running the same workload with the same stall-warning timeout on a
+	slow system.  Note that thermal throttling and on-demand governors
+	can cause a single system to be sometimes fast and sometimes slow!
+
+-	A hardware or software issue shuts off the scheduler-clock
+	interrupt on a CPU that is not in dyntick-idle mode.  This
+	problem really has happened, and seems to be most likely to
+	result in RCU CPU stall warnings for CONFIG_NO_HZ_COMMON=n kernels.
+
+-	A bug in the RCU implementation.
+
+-	A hardware failure.  This is quite unlikely, but has occurred
+	at least once in real life.  A CPU failed in a running system,
+	becoming unresponsive, but not causing an immediate crash.
+	This resulted in a series of RCU CPU stall warnings, eventually
+	leading the realization that the CPU had failed.
+
+The RCU, RCU-sched, and RCU-tasks implementations have CPU stall warning.
+Note that SRCU does -not- have CPU stall warnings.  Please note that
+RCU only detects CPU stalls when there is a grace period in progress.
+No grace period, no CPU stall warnings.
+
+To diagnose the cause of the stall, inspect the stack traces.
+The offending function will usually be near the top of the stack.
+If you have a series of stall warnings from a single extended stall,
+comparing the stack traces can often help determine where the stall
+is occurring, which will usually be in the function nearest the top of
+that portion of the stack which remains the same from trace to trace.
+If you can reliably trigger the stall, ftrace can be quite helpful.
+
+RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE
+and with RCU's event tracing.  For information on RCU's event tracing,
+see include/trace/events/rcu.h.
+
+
+Fine-Tuning the RCU CPU Stall Detector
+======================================
+
+The rcuupdate.rcu_cpu_stall_suppress module parameter disables RCU's
+CPU stall detector, which detects conditions that unduly delay RCU grace
+periods.  This module parameter enables CPU stall detection by default,
+but may be overridden via boot-time parameter or at runtime via sysfs.
+The stall detector's idea of what constitutes "unduly delayed" is
+controlled by a set of kernel configuration variables and cpp macros:
+
+CONFIG_RCU_CPU_STALL_TIMEOUT
+----------------------------
+
+	This kernel configuration parameter defines the period of time
+	that RCU will wait from the beginning of a grace period until it
+	issues an RCU CPU stall warning.  This time period is normally
+	21 seconds.
+
+	This configuration parameter may be changed at runtime via the
+	/sys/module/rcupdate/parameters/rcu_cpu_stall_timeout, however
+	this parameter is checked only at the beginning of a cycle.
+	So if you are 10 seconds into a 40-second stall, setting this
+	sysfs parameter to (say) five will shorten the timeout for the
+	-next- stall, or the following warning for the current stall
+	(assuming the stall lasts long enough).  It will not affect the
+	timing of the next warning for the current stall.
+
+	Stall-warning messages may be enabled and disabled completely via
+	/sys/module/rcupdate/parameters/rcu_cpu_stall_suppress.
+
+RCU_STALL_DELAY_DELTA
+---------------------
+
+	Although the lockdep facility is extremely useful, it does add
+	some overhead.  Therefore, under CONFIG_PROVE_RCU, the
+	RCU_STALL_DELAY_DELTA macro allows five extra seconds before
+	giving an RCU CPU stall warning message.  (This is a cpp
+	macro, not a kernel configuration parameter.)
+
+RCU_STALL_RAT_DELAY
+-------------------
+
+	The CPU stall detector tries to make the offending CPU print its
+	own warnings, as this often gives better-quality stack traces.
+	However, if the offending CPU does not detect its own stall in
+	the number of jiffies specified by RCU_STALL_RAT_DELAY, then
+	some other CPU will complain.  This delay is normally set to
+	two jiffies.  (This is a cpp macro, not a kernel configuration
+	parameter.)
+
+rcupdate.rcu_task_stall_timeout
+-------------------------------
+
+	This boot/sysfs parameter controls the RCU-tasks stall warning
+	interval.  A value of zero or less suppresses RCU-tasks stall
+	warnings.  A positive value sets the stall-warning interval
+	in seconds.  An RCU-tasks stall warning starts with the line:
+
+		INFO: rcu_tasks detected stalls on tasks:
+
+	And continues with the output of sched_show_task() for each
+	task stalling the current RCU-tasks grace period.
+
+
+Interpreting RCU's CPU Stall-Detector "Splats"
+==============================================
+
+For non-RCU-tasks flavors of RCU, when a CPU detects that it is stalling,
+it will print a message similar to the following::
+
+	INFO: rcu_sched detected stalls on CPUs/tasks:
+	2-...: (3 GPs behind) idle=06c/0/0 softirq=1453/1455 fqs=0
+	16-...: (0 ticks this GP) idle=81c/0/0 softirq=764/764 fqs=0
+	(detected by 32, t=2603 jiffies, g=7075, q=625)
+
+This message indicates that CPU 32 detected that CPUs 2 and 16 were both
+causing stalls, and that the stall was affecting RCU-sched.  This message
+will normally be followed by stack dumps for each CPU.  Please note that
+PREEMPT_RCU builds can be stalled by tasks as well as by CPUs, and that
+the tasks will be indicated by PID, for example, "P3421".  It is even
+possible for an rcu_state stall to be caused by both CPUs -and- tasks,
+in which case the offending CPUs and tasks will all be called out in the list.
+
+CPU 2's "(3 GPs behind)" indicates that this CPU has not interacted with
+the RCU core for the past three grace periods.  In contrast, CPU 16's "(0
+ticks this GP)" indicates that this CPU has not taken any scheduling-clock
+interrupts during the current stalled grace period.
+
+The "idle=" portion of the message prints the dyntick-idle state.
+The hex number before the first "/" is the low-order 12 bits of the
+dynticks counter, which will have an even-numbered value if the CPU
+is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
+number between the two "/"s is the value of the nesting, which will be
+a small non-negative number if in the idle loop (as shown above) and a
+very large positive number otherwise.
+
+The "softirq=" portion of the message tracks the number of RCU softirq
+handlers that the stalled CPU has executed.  The number before the "/"
+is the number that had executed since boot at the time that this CPU
+last noted the beginning of a grace period, which might be the current
+(stalled) grace period, or it might be some earlier grace period (for
+example, if the CPU might have been in dyntick-idle mode for an extended
+time period.  The number after the "/" is the number that have executed
+since boot until the current time.  If this latter number stays constant
+across repeated stall-warning messages, it is possible that RCU's softirq
+handlers are no longer able to execute on this CPU.  This can happen if
+the stalled CPU is spinning with interrupts are disabled, or, in -rt
+kernels, if a high-priority process is starving RCU's softirq handler.
+
+The "fqs=" shows the number of force-quiescent-state idle/offline
+detection passes that the grace-period kthread has made across this
+CPU since the last time that this CPU noted the beginning of a grace
+period.
+
+The "detected by" line indicates which CPU detected the stall (in this
+case, CPU 32), how many jiffies have elapsed since the start of the grace
+period (in this case 2603), the grace-period sequence number (7075), and
+an estimate of the total number of RCU callbacks queued across all CPUs
+(625 in this case).
+
+In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed
+for each CPU::
+
+	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 dyntick_enabled: 1
+
+The "last_accelerate:" prints the low-order 16 bits (in hex) of the
+jiffies counter when this CPU last invoked rcu_try_advance_all_cbs()
+from rcu_needs_cpu() or last invoked rcu_accelerate_cbs() from
+rcu_prepare_for_idle(). "dyntick_enabled: 1" indicates that dyntick-idle
+processing is enabled.
+
+If the grace period ends just as the stall warning starts printing,
+there will be a spurious stall-warning message, which will include
+the following::
+
+	INFO: Stall ended before state dump start
+
+This is rare, but does happen from time to time in real life.  It is also
+possible for a zero-jiffy stall to be flagged in this case, depending
+on how the stall warning and the grace-period initialization happen to
+interact.  Please note that it is not possible to entirely eliminate this
+sort of false positive without resorting to things like stop_machine(),
+which is overkill for this sort of problem.
+
+If all CPUs and tasks have passed through quiescent states, but the
+grace period has nevertheless failed to end, the stall-warning splat
+will include something like the following::
+
+	All QSes seen, last rcu_preempt kthread activity 23807 (4297905177-4297881370), jiffies_till_next_fqs=3, root ->qsmask 0x0
+
+The "23807" indicates that it has been more than 23 thousand jiffies
+since the grace-period kthread ran.  The "jiffies_till_next_fqs"
+indicates how frequently that kthread should run, giving the number
+of jiffies between force-quiescent-state scans, in this case three,
+which is way less than 23807.  Finally, the root rcu_node structure's
+->qsmask field is printed, which will normally be zero.
+
+If the relevant grace-period kthread has been unable to run prior to
+the stall warning, as was the case in the "All QSes seen" line above,
+the following additional line is printed::
+
+	kthread starved for 23807 jiffies! g7075 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 ->cpu=5
+
+Starving the grace-period kthreads of CPU time can of course result
+in RCU CPU stall warnings even when all CPUs and tasks have passed
+through the required quiescent states.  The "g" number shows the current
+grace-period sequence number, the "f" precedes the ->gp_flags command
+to the grace-period kthread, the "RCU_GP_WAIT_FQS" indicates that the
+kthread is waiting for a short timeout, the "state" precedes value of the
+task_struct ->state field, and the "cpu" indicates that the grace-period
+kthread last ran on CPU 5.
+
+
+Multiple Warnings From One Stall
+================================
+
+If a stall lasts long enough, multiple stall-warning messages will be
+printed for it.  The second and subsequent messages are printed at
+longer intervals, so that the time between (say) the first and second
+message will be about three times the interval between the beginning
+of the stall and the first message.
+
+
+Stall Warnings for Expedited Grace Periods
+==========================================
+
+If an expedited grace period detects a stall, it will place a message
+like the following in dmesg::
+
+	INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 7-... } 21119 jiffies s: 73 root: 0x2/.
+
+This indicates that CPU 7 has failed to respond to a reschedule IPI.
+The three periods (".") following the CPU number indicate that the CPU
+is online (otherwise the first period would instead have been "O"),
+that the CPU was online at the beginning of the expedited grace period
+(otherwise the second period would have instead been "o"), and that
+the CPU has been online at least once since boot (otherwise, the third
+period would instead have been "N").  The number before the "jiffies"
+indicates that the expedited grace period has been going on for 21,119
+jiffies.  The number following the "s:" indicates that the expedited
+grace-period sequence counter is 73.  The fact that this last value is
+odd indicates that an expedited grace period is in flight.  The number
+following "root:" is a bitmask that indicates which children of the root
+rcu_node structure correspond to CPUs and/or tasks that are blocking the
+current expedited grace period.  If the tree had more than one level,
+additional hex numbers would be printed for the states of the other
+rcu_node structures in the tree.
+
+As with normal grace periods, PREEMPT_RCU builds can be stalled by
+tasks as well as by CPUs, and that the tasks will be indicated by PID,
+for example, "P3421".
+
+It is entirely possible to see stall warnings from normal and from
+expedited grace periods at about the same time during the same run.
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
deleted file mode 100644
index a360a8796710..000000000000
--- a/Documentation/RCU/stallwarn.txt
+++ /dev/null
@@ -1,316 +0,0 @@
-Using RCU's CPU Stall Detector
-
-This document first discusses what sorts of issues RCU's CPU stall
-detector can locate, and then discusses kernel parameters and Kconfig
-options that can be used to fine-tune the detector's operation.  Finally,
-this document explains the stall detector's "splat" format.
-
-
-What Causes RCU CPU Stall Warnings?
-
-So your kernel printed an RCU CPU stall warning.  The next question is
-"What caused it?"  The following problems can result in RCU CPU stall
-warnings:
-
-o	A CPU looping in an RCU read-side critical section.
-
-o	A CPU looping with interrupts disabled.
-
-o	A CPU looping with preemption disabled.
-
-o	A CPU looping with bottom halves disabled.
-
-o	For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
-	without invoking schedule().  If the looping in the kernel is
-	really expected and desirable behavior, you might need to add
-	some calls to cond_resched().
-
-o	Booting Linux using a console connection that is too slow to
-	keep up with the boot-time console-message rate.  For example,
-	a 115Kbaud serial console can be -way- too slow to keep up
-	with boot-time message rates, and will frequently result in
-	RCU CPU stall warning messages.  Especially if you have added
-	debug printk()s.
-
-o	Anything that prevents RCU's grace-period kthreads from running.
-	This can result in the "All QSes seen" console-log message.
-	This message will include information on when the kthread last
-	ran and how often it should be expected to run.  It can also
-	result in the "rcu_.*kthread starved for" console-log message,
-	which will include additional debugging information.
-
-o	A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
-	happen to preempt a low-priority task in the middle of an RCU
-	read-side critical section.   This is especially damaging if
-	that low-priority task is not permitted to run on any other CPU,
-	in which case the next RCU grace period can never complete, which
-	will eventually cause the system to run out of memory and hang.
-	While the system is in the process of running itself out of
-	memory, you might see stall-warning messages.
-
-o	A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
-	is running at a higher priority than the RCU softirq threads.
-	This will prevent RCU callbacks from ever being invoked,
-	and in a CONFIG_PREEMPT_RCU kernel will further prevent
-	RCU grace periods from ever completing.  Either way, the
-	system will eventually run out of memory and hang.  In the
-	CONFIG_PREEMPT_RCU case, you might see stall-warning
-	messages.
-
-	You can use the rcutree.kthread_prio kernel boot parameter to
-	increase the scheduling priority of RCU's kthreads, which can
-	help avoid this problem.  However, please note that doing this
-	can increase your system's context-switch rate and thus degrade
-	performance.
-
-o	A periodic interrupt whose handler takes longer than the time
-	interval between successive pairs of interrupts.  This can
-	prevent RCU's kthreads and softirq handlers from running.
-	Note that certain high-overhead debugging options, for example
-	the function_graph tracer, can result in interrupt handler taking
-	considerably longer than normal, which can in turn result in
-	RCU CPU stall warnings.
-
-o	Testing a workload on a fast system, tuning the stall-warning
-	timeout down to just barely avoid RCU CPU stall warnings, and then
-	running the same workload with the same stall-warning timeout on a
-	slow system.  Note that thermal throttling and on-demand governors
-	can cause a single system to be sometimes fast and sometimes slow!
-
-o	A hardware or software issue shuts off the scheduler-clock
-	interrupt on a CPU that is not in dyntick-idle mode.  This
-	problem really has happened, and seems to be most likely to
-	result in RCU CPU stall warnings for CONFIG_NO_HZ_COMMON=n kernels.
-
-o	A bug in the RCU implementation.
-
-o	A hardware failure.  This is quite unlikely, but has occurred
-	at least once in real life.  A CPU failed in a running system,
-	becoming unresponsive, but not causing an immediate crash.
-	This resulted in a series of RCU CPU stall warnings, eventually
-	leading the realization that the CPU had failed.
-
-The RCU, RCU-sched, and RCU-tasks implementations have CPU stall warning.
-Note that SRCU does -not- have CPU stall warnings.  Please note that
-RCU only detects CPU stalls when there is a grace period in progress.
-No grace period, no CPU stall warnings.
-
-To diagnose the cause of the stall, inspect the stack traces.
-The offending function will usually be near the top of the stack.
-If you have a series of stall warnings from a single extended stall,
-comparing the stack traces can often help determine where the stall
-is occurring, which will usually be in the function nearest the top of
-that portion of the stack which remains the same from trace to trace.
-If you can reliably trigger the stall, ftrace can be quite helpful.
-
-RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE
-and with RCU's event tracing.  For information on RCU's event tracing,
-see include/trace/events/rcu.h.
-
-
-Fine-Tuning the RCU CPU Stall Detector
-
-The rcuupdate.rcu_cpu_stall_suppress module parameter disables RCU's
-CPU stall detector, which detects conditions that unduly delay RCU grace
-periods.  This module parameter enables CPU stall detection by default,
-but may be overridden via boot-time parameter or at runtime via sysfs.
-The stall detector's idea of what constitutes "unduly delayed" is
-controlled by a set of kernel configuration variables and cpp macros:
-
-CONFIG_RCU_CPU_STALL_TIMEOUT
-
-	This kernel configuration parameter defines the period of time
-	that RCU will wait from the beginning of a grace period until it
-	issues an RCU CPU stall warning.  This time period is normally
-	21 seconds.
-
-	This configuration parameter may be changed at runtime via the
-	/sys/module/rcupdate/parameters/rcu_cpu_stall_timeout, however
-	this parameter is checked only at the beginning of a cycle.
-	So if you are 10 seconds into a 40-second stall, setting this
-	sysfs parameter to (say) five will shorten the timeout for the
-	-next- stall, or the following warning for the current stall
-	(assuming the stall lasts long enough).  It will not affect the
-	timing of the next warning for the current stall.
-
-	Stall-warning messages may be enabled and disabled completely via
-	/sys/module/rcupdate/parameters/rcu_cpu_stall_suppress.
-
-RCU_STALL_DELAY_DELTA
-
-	Although the lockdep facility is extremely useful, it does add
-	some overhead.  Therefore, under CONFIG_PROVE_RCU, the
-	RCU_STALL_DELAY_DELTA macro allows five extra seconds before
-	giving an RCU CPU stall warning message.  (This is a cpp
-	macro, not a kernel configuration parameter.)
-
-RCU_STALL_RAT_DELAY
-
-	The CPU stall detector tries to make the offending CPU print its
-	own warnings, as this often gives better-quality stack traces.
-	However, if the offending CPU does not detect its own stall in
-	the number of jiffies specified by RCU_STALL_RAT_DELAY, then
-	some other CPU will complain.  This delay is normally set to
-	two jiffies.  (This is a cpp macro, not a kernel configuration
-	parameter.)
-
-rcupdate.rcu_task_stall_timeout
-
-	This boot/sysfs parameter controls the RCU-tasks stall warning
-	interval.  A value of zero or less suppresses RCU-tasks stall
-	warnings.  A positive value sets the stall-warning interval
-	in seconds.  An RCU-tasks stall warning starts with the line:
-
-		INFO: rcu_tasks detected stalls on tasks:
-
-	And continues with the output of sched_show_task() for each
-	task stalling the current RCU-tasks grace period.
-
-
-Interpreting RCU's CPU Stall-Detector "Splats"
-
-For non-RCU-tasks flavors of RCU, when a CPU detects that it is stalling,
-it will print a message similar to the following:
-
-	INFO: rcu_sched detected stalls on CPUs/tasks:
-	2-...: (3 GPs behind) idle=06c/0/0 softirq=1453/1455 fqs=0
-	16-...: (0 ticks this GP) idle=81c/0/0 softirq=764/764 fqs=0
-	(detected by 32, t=2603 jiffies, g=7075, q=625)
-
-This message indicates that CPU 32 detected that CPUs 2 and 16 were both
-causing stalls, and that the stall was affecting RCU-sched.  This message
-will normally be followed by stack dumps for each CPU.  Please note that
-PREEMPT_RCU builds can be stalled by tasks as well as by CPUs, and that
-the tasks will be indicated by PID, for example, "P3421".  It is even
-possible for an rcu_state stall to be caused by both CPUs -and- tasks,
-in which case the offending CPUs and tasks will all be called out in the list.
-
-CPU 2's "(3 GPs behind)" indicates that this CPU has not interacted with
-the RCU core for the past three grace periods.  In contrast, CPU 16's "(0
-ticks this GP)" indicates that this CPU has not taken any scheduling-clock
-interrupts during the current stalled grace period.
-
-The "idle=" portion of the message prints the dyntick-idle state.
-The hex number before the first "/" is the low-order 12 bits of the
-dynticks counter, which will have an even-numbered value if the CPU
-is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
-number between the two "/"s is the value of the nesting, which will be
-a small non-negative number if in the idle loop (as shown above) and a
-very large positive number otherwise.
-
-The "softirq=" portion of the message tracks the number of RCU softirq
-handlers that the stalled CPU has executed.  The number before the "/"
-is the number that had executed since boot at the time that this CPU
-last noted the beginning of a grace period, which might be the current
-(stalled) grace period, or it might be some earlier grace period (for
-example, if the CPU might have been in dyntick-idle mode for an extended
-time period.  The number after the "/" is the number that have executed
-since boot until the current time.  If this latter number stays constant
-across repeated stall-warning messages, it is possible that RCU's softirq
-handlers are no longer able to execute on this CPU.  This can happen if
-the stalled CPU is spinning with interrupts are disabled, or, in -rt
-kernels, if a high-priority process is starving RCU's softirq handler.
-
-The "fqs=" shows the number of force-quiescent-state idle/offline
-detection passes that the grace-period kthread has made across this
-CPU since the last time that this CPU noted the beginning of a grace
-period.
-
-The "detected by" line indicates which CPU detected the stall (in this
-case, CPU 32), how many jiffies have elapsed since the start of the grace
-period (in this case 2603), the grace-period sequence number (7075), and
-an estimate of the total number of RCU callbacks queued across all CPUs
-(625 in this case).
-
-In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed
-for each CPU:
-
-	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 dyntick_enabled: 1
-
-The "last_accelerate:" prints the low-order 16 bits (in hex) of the
-jiffies counter when this CPU last invoked rcu_try_advance_all_cbs()
-from rcu_needs_cpu() or last invoked rcu_accelerate_cbs() from
-rcu_prepare_for_idle(). "dyntick_enabled: 1" indicates that dyntick-idle
-processing is enabled.
-
-If the grace period ends just as the stall warning starts printing,
-there will be a spurious stall-warning message, which will include
-the following:
-
-	INFO: Stall ended before state dump start
-
-This is rare, but does happen from time to time in real life.  It is also
-possible for a zero-jiffy stall to be flagged in this case, depending
-on how the stall warning and the grace-period initialization happen to
-interact.  Please note that it is not possible to entirely eliminate this
-sort of false positive without resorting to things like stop_machine(),
-which is overkill for this sort of problem.
-
-If all CPUs and tasks have passed through quiescent states, but the
-grace period has nevertheless failed to end, the stall-warning splat
-will include something like the following:
-
-	All QSes seen, last rcu_preempt kthread activity 23807 (4297905177-4297881370), jiffies_till_next_fqs=3, root ->qsmask 0x0
-
-The "23807" indicates that it has been more than 23 thousand jiffies
-since the grace-period kthread ran.  The "jiffies_till_next_fqs"
-indicates how frequently that kthread should run, giving the number
-of jiffies between force-quiescent-state scans, in this case three,
-which is way less than 23807.  Finally, the root rcu_node structure's
-->qsmask field is printed, which will normally be zero.
-
-If the relevant grace-period kthread has been unable to run prior to
-the stall warning, as was the case in the "All QSes seen" line above,
-the following additional line is printed:
-
-	kthread starved for 23807 jiffies! g7075 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 ->cpu=5
-
-Starving the grace-period kthreads of CPU time can of course result
-in RCU CPU stall warnings even when all CPUs and tasks have passed
-through the required quiescent states.  The "g" number shows the current
-grace-period sequence number, the "f" precedes the ->gp_flags command
-to the grace-period kthread, the "RCU_GP_WAIT_FQS" indicates that the
-kthread is waiting for a short timeout, the "state" precedes value of the
-task_struct ->state field, and the "cpu" indicates that the grace-period
-kthread last ran on CPU 5.
-
-
-Multiple Warnings From One Stall
-
-If a stall lasts long enough, multiple stall-warning messages will be
-printed for it.  The second and subsequent messages are printed at
-longer intervals, so that the time between (say) the first and second
-message will be about three times the interval between the beginning
-of the stall and the first message.
-
-
-Stall Warnings for Expedited Grace Periods
-
-If an expedited grace period detects a stall, it will place a message
-like the following in dmesg:
-
-	INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 7-... } 21119 jiffies s: 73 root: 0x2/.
-
-This indicates that CPU 7 has failed to respond to a reschedule IPI.
-The three periods (".") following the CPU number indicate that the CPU
-is online (otherwise the first period would instead have been "O"),
-that the CPU was online at the beginning of the expedited grace period
-(otherwise the second period would have instead been "o"), and that
-the CPU has been online at least once since boot (otherwise, the third
-period would instead have been "N").  The number before the "jiffies"
-indicates that the expedited grace period has been going on for 21,119
-jiffies.  The number following the "s:" indicates that the expedited
-grace-period sequence counter is 73.  The fact that this last value is
-odd indicates that an expedited grace period is in flight.  The number
-following "root:" is a bitmask that indicates which children of the root
-rcu_node structure correspond to CPUs and/or tasks that are blocking the
-current expedited grace period.  If the tree had more than one level,
-additional hex numbers would be printed for the states of the other
-rcu_node structures in the tree.
-
-As with normal grace periods, PREEMPT_RCU builds can be stalled by
-tasks as well as by CPUs, and that the tasks will be indicated by PID,
-for example, "P3421".
-
-It is entirely possible to see stall warnings from normal and from
-expedited grace periods at about the same time during the same run.
diff --git a/Documentation/RCU/torture.rst b/Documentation/RCU/torture.rst
new file mode 100644
index 000000000000..a90147713062
--- /dev/null
+++ b/Documentation/RCU/torture.rst
@@ -0,0 +1,293 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+RCU Torture Test Operation
+==========================
+
+
+CONFIG_RCU_TORTURE_TEST
+=======================
+
+The CONFIG_RCU_TORTURE_TEST config option is available for all RCU
+implementations.  It creates an rcutorture kernel module that can
+be loaded to run a torture test.  The test periodically outputs
+status messages via printk(), which can be examined via the dmesg
+command (perhaps grepping for "torture").  The test is started
+when the module is loaded, and stops when the module is unloaded.
+
+Module parameters are prefixed by "rcutorture." in
+Documentation/admin-guide/kernel-parameters.txt.
+
+Output
+======
+
+The statistics output is as follows::
+
+	rcu-torture:--- Start of test: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
+	rcu-torture: rtc:           (null) ver: 155441 tfle: 0 rta: 155441 rtaf: 8884 rtf: 155440 rtmbe: 0 rtbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 3055767
+	rcu-torture: Reader Pipe:  727860534 34213 0 0 0 0 0 0 0 0 0
+	rcu-torture: Reader Batch:  727877838 17003 0 0 0 0 0 0 0 0 0
+	rcu-torture: Free-Block Circulation:  155440 155440 155440 155440 155440 155440 155440 155440 155440 155440 0
+	rcu-torture:--- End of test: SUCCESS: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
+
+The command "dmesg | grep torture:" will extract this information on
+most systems.  On more esoteric configurations, it may be necessary to
+use other commands to access the output of the printk()s used by
+the RCU torture test.  The printk()s use KERN_ALERT, so they should
+be evident.  ;-)
+
+The first and last lines show the rcutorture module parameters, and the
+last line shows either "SUCCESS" or "FAILURE", based on rcutorture's
+automatic determination as to whether RCU operated correctly.
+
+The entries are as follows:
+
+*	"rtc": The hexadecimal address of the structure currently visible
+	to readers.
+
+*	"ver": The number of times since boot that the RCU writer task
+	has changed the structure visible to readers.
+
+*	"tfle": If non-zero, indicates that the "torture freelist"
+	containing structures to be placed into the "rtc" area is empty.
+	This condition is important, since it can fool you into thinking
+	that RCU is working when it is not.  :-/
+
+*	"rta": Number of structures allocated from the torture freelist.
+
+*	"rtaf": Number of allocations from the torture freelist that have
+	failed due to the list being empty.  It is not unusual for this
+	to be non-zero, but it is bad for it to be a large fraction of
+	the value indicated by "rta".
+
+*	"rtf": Number of frees into the torture freelist.
+
+*	"rtmbe": A non-zero value indicates that rcutorture believes that
+	rcu_assign_pointer() and rcu_dereference() are not working
+	correctly.  This value should be zero.
+
+*	"rtbe": A non-zero value indicates that one of the rcu_barrier()
+	family of functions is not working correctly.
+
+*	"rtbke": rcutorture was unable to create the real-time kthreads
+	used to force RCU priority inversion.  This value should be zero.
+
+*	"rtbre": Although rcutorture successfully created the kthreads
+	used to force RCU priority inversion, it was unable to set them
+	to the real-time priority level of 1.  This value should be zero.
+
+*	"rtbf": The number of times that RCU priority boosting failed
+	to resolve RCU priority inversion.
+
+*	"rtb": The number of times that rcutorture attempted to force
+	an RCU priority inversion condition.  If you are testing RCU
+	priority boosting via the "test_boost" module parameter, this
+	value should be non-zero.
+
+*	"nt": The number of times rcutorture ran RCU read-side code from
+	within a timer handler.  This value should be non-zero only
+	if you specified the "irqreader" module parameter.
+
+*	"Reader Pipe": Histogram of "ages" of structures seen by readers.
+	If any entries past the first two are non-zero, RCU is broken.
+	And rcutorture prints the error flag string "!!!" to make sure
+	you notice.  The age of a newly allocated structure is zero,
+	it becomes one when removed from reader visibility, and is
+	incremented once per grace period subsequently -- and is freed
+	after passing through (RCU_TORTURE_PIPE_LEN-2) grace periods.
+
+	The output displayed above was taken from a correctly working
+	RCU.  If you want to see what it looks like when broken, break
+	it yourself.  ;-)
+
+*	"Reader Batch": Another histogram of "ages" of structures seen
+	by readers, but in terms of counter flips (or batches) rather
+	than in terms of grace periods.  The legal number of non-zero
+	entries is again two.  The reason for this separate view is that
+	it is sometimes easier to get the third entry to show up in the
+	"Reader Batch" list than in the "Reader Pipe" list.
+
+*	"Free-Block Circulation": Shows the number of torture structures
+	that have reached a given point in the pipeline.  The first element
+	should closely correspond to the number of structures allocated,
+	the second to the number that have been removed from reader view,
+	and all but the last remaining to the corresponding number of
+	passes through a grace period.  The last entry should be zero,
+	as it is only incremented if a torture structure's counter
+	somehow gets incremented farther than it should.
+
+Different implementations of RCU can provide implementation-specific
+additional information.  For example, Tree SRCU provides the following
+additional line::
+
+	srcud-torture: Tree SRCU per-CPU(idx=0): 0(35,-21) 1(-4,24) 2(1,1) 3(-26,20) 4(28,-47) 5(-9,4) 6(-10,14) 7(-14,11) T(1,6)
+
+This line shows the per-CPU counter state, in this case for Tree SRCU
+using a dynamically allocated srcu_struct (hence "srcud-" rather than
+"srcu-").  The numbers in parentheses are the values of the "old" and
+"current" counters for the corresponding CPU.  The "idx" value maps the
+"old" and "current" values to the underlying array, and is useful for
+debugging.  The final "T" entry contains the totals of the counters.
+
+Usage on Specific Kernel Builds
+===============================
+
+It is sometimes desirable to torture RCU on a specific kernel build,
+for example, when preparing to put that kernel build into production.
+In that case, the kernel should be built with CONFIG_RCU_TORTURE_TEST=m
+so that the test can be started using modprobe and terminated using rmmod.
+
+For example, the following script may be used to torture RCU::
+
+	#!/bin/sh
+
+	modprobe rcutorture
+	sleep 3600
+	rmmod rcutorture
+	dmesg | grep torture:
+
+The output can be manually inspected for the error flag of "!!!".
+One could of course create a more elaborate script that automatically
+checked for such errors.  The "rmmod" command forces a "SUCCESS",
+"FAILURE", or "RCU_HOTPLUG" indication to be printk()ed.  The first
+two are self-explanatory, while the last indicates that while there
+were no RCU failures, CPU-hotplug problems were detected.
+
+
+Usage on Mainline Kernels
+=========================
+
+When using rcutorture to test changes to RCU itself, it is often
+necessary to build a number of kernels in order to test that change
+across a broad range of combinations of the relevant Kconfig options
+and of the relevant kernel boot parameters.  In this situation, use
+of modprobe and rmmod can be quite time-consuming and error-prone.
+
+Therefore, the tools/testing/selftests/rcutorture/bin/kvm.sh
+script is available for mainline testing for x86, arm64, and
+powerpc.  By default, it will run the series of tests specified by
+tools/testing/selftests/rcutorture/configs/rcu/CFLIST, with each test
+running for 30 minutes within a guest OS using a minimal userspace
+supplied by an automatically generated initrd.  After the tests are
+complete, the resulting build products and console output are analyzed
+for errors and the results of the runs are summarized.
+
+On larger systems, rcutorture testing can be accelerated by passing the
+--cpus argument to kvm.sh.  For example, on a 64-CPU system, "--cpus 43"
+would use up to 43 CPUs to run tests concurrently, which as of v5.4 would
+complete all the scenarios in two batches, reducing the time to complete
+from about eight hours to about one hour (not counting the time to build
+the sixteen kernels).  The "--dryrun sched" argument will not run tests,
+but rather tell you how the tests would be scheduled into batches.  This
+can be useful when working out how many CPUs to specify in the --cpus
+argument.
+
+Not all changes require that all scenarios be run.  For example, a change
+to Tree SRCU might run only the SRCU-N and SRCU-P scenarios using the
+--configs argument to kvm.sh as follows:  "--configs 'SRCU-N SRCU-P'".
+Large systems can run multiple copies of of the full set of scenarios,
+for example, a system with 448 hardware threads can run five instances
+of the full set concurrently.  To make this happen::
+
+	kvm.sh --cpus 448 --configs '5*CFLIST'
+
+Alternatively, such a system can run 56 concurrent instances of a single
+eight-CPU scenario::
+
+	kvm.sh --cpus 448 --configs '56*TREE04'
+
+Or 28 concurrent instances of each of two eight-CPU scenarios::
+
+	kvm.sh --cpus 448 --configs '28*TREE03 28*TREE04'
+
+Of course, each concurrent instance will use memory, which can be
+limited using the --memory argument, which defaults to 512M.  Small
+values for memory may require disabling the callback-flooding tests
+using the --bootargs parameter discussed below.
+
+Sometimes additional debugging is useful, and in such cases the --kconfig
+parameter to kvm.sh may be used, for example, ``--kconfig 'CONFIG_KASAN=y'``.
+
+Kernel boot arguments can also be supplied, for example, to control
+rcutorture's module parameters.  For example, to test a change to RCU's
+CPU stall-warning code, use "--bootargs 'rcutorture.stall_cpu=30'".
+This will of course result in the scripting reporting a failure, namely
+the resuling RCU CPU stall warning.  As noted above, reducing memory may
+require disabling rcutorture's callback-flooding tests::
+
+	kvm.sh --cpus 448 --configs '56*TREE04' --memory 128M \
+		--bootargs 'rcutorture.fwd_progress=0'
+
+Sometimes all that is needed is a full set of kernel builds.  This is
+what the --buildonly argument does.
+
+Finally, the --trust-make argument allows each kernel build to reuse what
+it can from the previous kernel build.
+
+There are additional more arcane arguments that are documented in the
+source code of the kvm.sh script.
+
+If a run contains failures, the number of buildtime and runtime failures
+is listed at the end of the kvm.sh output, which you really should redirect
+to a file.  The build products and console output of each run is kept in
+tools/testing/selftests/rcutorture/res in timestamped directories.  A
+given directory can be supplied to kvm-find-errors.sh in order to have
+it cycle you through summaries of errors and full error logs.  For example::
+
+	tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh \
+		tools/testing/selftests/rcutorture/res/2020.01.20-15.54.23
+
+However, it is often more convenient to access the files directly.
+Files pertaining to all scenarios in a run reside in the top-level
+directory (2020.01.20-15.54.23 in the example above), while per-scenario
+files reside in a subdirectory named after the scenario (for example,
+"TREE04").  If a given scenario ran more than once (as in "--configs
+'56*TREE04'" above), the directories corresponding to the second and
+subsequent runs of that scenario include a sequence number, for example,
+"TREE04.2", "TREE04.3", and so on.
+
+The most frequently used file in the top-level directory is testid.txt.
+If the test ran in a git repository, then this file contains the commit
+that was tested and any uncommitted changes in diff format.
+
+The most frequently used files in each per-scenario-run directory are:
+
+.config:
+	This file contains the Kconfig options.
+
+Make.out:
+	This contains build output for a specific scenario.
+
+console.log:
+	This contains the console output for a specific scenario.
+	This file may be examined once the kernel has booted, but
+	it might not exist if the build failed.
+
+vmlinux:
+	This contains the kernel, which can be useful with tools like
+	objdump and gdb.
+
+A number of additional files are available, but are less frequently used.
+Many are intended for debugging of rcutorture itself or of its scripting.
+
+As of v5.4, a successful run with the default set of scenarios produces
+the following summary at the end of the run on a 12-CPU system::
+
+    SRCU-N ------- 804233 GPs (148.932/s) [srcu: g10008272 f0x0 ]
+    SRCU-P ------- 202320 GPs (37.4667/s) [srcud: g1809476 f0x0 ]
+    SRCU-t ------- 1122086 GPs (207.794/s) [srcu: g0 f0x0 ]
+    SRCU-u ------- 1111285 GPs (205.794/s) [srcud: g1 f0x0 ]
+    TASKS01 ------- 19666 GPs (3.64185/s) [tasks: g0 f0x0 ]
+    TASKS02 ------- 20541 GPs (3.80389/s) [tasks: g0 f0x0 ]
+    TASKS03 ------- 19416 GPs (3.59556/s) [tasks: g0 f0x0 ]
+    TINY01 ------- 836134 GPs (154.84/s) [rcu: g0 f0x0 ] n_max_cbs: 34198
+    TINY02 ------- 850371 GPs (157.476/s) [rcu: g0 f0x0 ] n_max_cbs: 2631
+    TREE01 ------- 162625 GPs (30.1157/s) [rcu: g1124169 f0x0 ]
+    TREE02 ------- 333003 GPs (61.6672/s) [rcu: g2647753 f0x0 ] n_max_cbs: 35844
+    TREE03 ------- 306623 GPs (56.782/s) [rcu: g2975325 f0x0 ] n_max_cbs: 1496497
+    CPU count limited from 16 to 12
+    TREE04 ------- 246149 GPs (45.5831/s) [rcu: g1695737 f0x0 ] n_max_cbs: 434961
+    TREE05 ------- 314603 GPs (58.2598/s) [rcu: g2257741 f0x2 ] n_max_cbs: 193997
+    TREE07 ------- 167347 GPs (30.9902/s) [rcu: g1079021 f0x0 ] n_max_cbs: 478732
+    CPU count limited from 16 to 12
+    TREE09 ------- 752238 GPs (139.303/s) [rcu: g13075057 f0x0 ] n_max_cbs: 99011
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt
deleted file mode 100644
index af712a3c5b6a..000000000000
--- a/Documentation/RCU/torture.txt
+++ /dev/null
@@ -1,282 +0,0 @@
-RCU Torture Test Operation
-
-
-CONFIG_RCU_TORTURE_TEST
-
-The CONFIG_RCU_TORTURE_TEST config option is available for all RCU
-implementations.  It creates an rcutorture kernel module that can
-be loaded to run a torture test.  The test periodically outputs
-status messages via printk(), which can be examined via the dmesg
-command (perhaps grepping for "torture").  The test is started
-when the module is loaded, and stops when the module is unloaded.
-
-Module parameters are prefixed by "rcutorture." in
-Documentation/admin-guide/kernel-parameters.txt.
-
-OUTPUT
-
-The statistics output is as follows:
-
-	rcu-torture:--- Start of test: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
-	rcu-torture: rtc:           (null) ver: 155441 tfle: 0 rta: 155441 rtaf: 8884 rtf: 155440 rtmbe: 0 rtbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 3055767
-	rcu-torture: Reader Pipe:  727860534 34213 0 0 0 0 0 0 0 0 0
-	rcu-torture: Reader Batch:  727877838 17003 0 0 0 0 0 0 0 0 0
-	rcu-torture: Free-Block Circulation:  155440 155440 155440 155440 155440 155440 155440 155440 155440 155440 0
-	rcu-torture:--- End of test: SUCCESS: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
-
-The command "dmesg | grep torture:" will extract this information on
-most systems.  On more esoteric configurations, it may be necessary to
-use other commands to access the output of the printk()s used by
-the RCU torture test.  The printk()s use KERN_ALERT, so they should
-be evident.  ;-)
-
-The first and last lines show the rcutorture module parameters, and the
-last line shows either "SUCCESS" or "FAILURE", based on rcutorture's
-automatic determination as to whether RCU operated correctly.
-
-The entries are as follows:
-
-o	"rtc": The hexadecimal address of the structure currently visible
-	to readers.
-
-o	"ver": The number of times since boot that the RCU writer task
-	has changed the structure visible to readers.
-
-o	"tfle": If non-zero, indicates that the "torture freelist"
-	containing structures to be placed into the "rtc" area is empty.
-	This condition is important, since it can fool you into thinking
-	that RCU is working when it is not.  :-/
-
-o	"rta": Number of structures allocated from the torture freelist.
-
-o	"rtaf": Number of allocations from the torture freelist that have
-	failed due to the list being empty.  It is not unusual for this
-	to be non-zero, but it is bad for it to be a large fraction of
-	the value indicated by "rta".
-
-o	"rtf": Number of frees into the torture freelist.
-
-o	"rtmbe": A non-zero value indicates that rcutorture believes that
-	rcu_assign_pointer() and rcu_dereference() are not working
-	correctly.  This value should be zero.
-
-o	"rtbe": A non-zero value indicates that one of the rcu_barrier()
-	family of functions is not working correctly.
-
-o	"rtbke": rcutorture was unable to create the real-time kthreads
-	used to force RCU priority inversion.  This value should be zero.
-
-o	"rtbre": Although rcutorture successfully created the kthreads
-	used to force RCU priority inversion, it was unable to set them
-	to the real-time priority level of 1.  This value should be zero.
-
-o	"rtbf": The number of times that RCU priority boosting failed
-	to resolve RCU priority inversion.
-
-o	"rtb": The number of times that rcutorture attempted to force
-	an RCU priority inversion condition.  If you are testing RCU
-	priority boosting via the "test_boost" module parameter, this
-	value should be non-zero.
-
-o	"nt": The number of times rcutorture ran RCU read-side code from
-	within a timer handler.  This value should be non-zero only
-	if you specified the "irqreader" module parameter.
-
-o	"Reader Pipe": Histogram of "ages" of structures seen by readers.
-	If any entries past the first two are non-zero, RCU is broken.
-	And rcutorture prints the error flag string "!!!" to make sure
-	you notice.  The age of a newly allocated structure is zero,
-	it becomes one when removed from reader visibility, and is
-	incremented once per grace period subsequently -- and is freed
-	after passing through (RCU_TORTURE_PIPE_LEN-2) grace periods.
-
-	The output displayed above was taken from a correctly working
-	RCU.  If you want to see what it looks like when broken, break
-	it yourself.  ;-)
-
-o	"Reader Batch": Another histogram of "ages" of structures seen
-	by readers, but in terms of counter flips (or batches) rather
-	than in terms of grace periods.  The legal number of non-zero
-	entries is again two.  The reason for this separate view is that
-	it is sometimes easier to get the third entry to show up in the
-	"Reader Batch" list than in the "Reader Pipe" list.
-
-o	"Free-Block Circulation": Shows the number of torture structures
-	that have reached a given point in the pipeline.  The first element
-	should closely correspond to the number of structures allocated,
-	the second to the number that have been removed from reader view,
-	and all but the last remaining to the corresponding number of
-	passes through a grace period.  The last entry should be zero,
-	as it is only incremented if a torture structure's counter
-	somehow gets incremented farther than it should.
-
-Different implementations of RCU can provide implementation-specific
-additional information.  For example, Tree SRCU provides the following
-additional line:
-
-	srcud-torture: Tree SRCU per-CPU(idx=0): 0(35,-21) 1(-4,24) 2(1,1) 3(-26,20) 4(28,-47) 5(-9,4) 6(-10,14) 7(-14,11) T(1,6)
-
-This line shows the per-CPU counter state, in this case for Tree SRCU
-using a dynamically allocated srcu_struct (hence "srcud-" rather than
-"srcu-").  The numbers in parentheses are the values of the "old" and
-"current" counters for the corresponding CPU.  The "idx" value maps the
-"old" and "current" values to the underlying array, and is useful for
-debugging.  The final "T" entry contains the totals of the counters.
-
-
-USAGE ON SPECIFIC KERNEL BUILDS
-
-It is sometimes desirable to torture RCU on a specific kernel build,
-for example, when preparing to put that kernel build into production.
-In that case, the kernel should be built with CONFIG_RCU_TORTURE_TEST=m
-so that the test can be started using modprobe and terminated using rmmod.
-
-For example, the following script may be used to torture RCU:
-
-	#!/bin/sh
-
-	modprobe rcutorture
-	sleep 3600
-	rmmod rcutorture
-	dmesg | grep torture:
-
-The output can be manually inspected for the error flag of "!!!".
-One could of course create a more elaborate script that automatically
-checked for such errors.  The "rmmod" command forces a "SUCCESS",
-"FAILURE", or "RCU_HOTPLUG" indication to be printk()ed.  The first
-two are self-explanatory, while the last indicates that while there
-were no RCU failures, CPU-hotplug problems were detected.
-
-
-USAGE ON MAINLINE KERNELS
-
-When using rcutorture to test changes to RCU itself, it is often
-necessary to build a number of kernels in order to test that change
-across a broad range of combinations of the relevant Kconfig options
-and of the relevant kernel boot parameters.  In this situation, use
-of modprobe and rmmod can be quite time-consuming and error-prone.
-
-Therefore, the tools/testing/selftests/rcutorture/bin/kvm.sh
-script is available for mainline testing for x86, arm64, and
-powerpc.  By default, it will run the series of tests specified by
-tools/testing/selftests/rcutorture/configs/rcu/CFLIST, with each test
-running for 30 minutes within a guest OS using a minimal userspace
-supplied by an automatically generated initrd.  After the tests are
-complete, the resulting build products and console output are analyzed
-for errors and the results of the runs are summarized.
-
-On larger systems, rcutorture testing can be accelerated by passing the
---cpus argument to kvm.sh.  For example, on a 64-CPU system, "--cpus 43"
-would use up to 43 CPUs to run tests concurrently, which as of v5.4 would
-complete all the scenarios in two batches, reducing the time to complete
-from about eight hours to about one hour (not counting the time to build
-the sixteen kernels).  The "--dryrun sched" argument will not run tests,
-but rather tell you how the tests would be scheduled into batches.  This
-can be useful when working out how many CPUs to specify in the --cpus
-argument.
-
-Not all changes require that all scenarios be run.  For example, a change
-to Tree SRCU might run only the SRCU-N and SRCU-P scenarios using the
---configs argument to kvm.sh as follows:  "--configs 'SRCU-N SRCU-P'".
-Large systems can run multiple copies of of the full set of scenarios,
-for example, a system with 448 hardware threads can run five instances
-of the full set concurrently.  To make this happen:
-
-	kvm.sh --cpus 448 --configs '5*CFLIST'
-
-Alternatively, such a system can run 56 concurrent instances of a single
-eight-CPU scenario:
-
-	kvm.sh --cpus 448 --configs '56*TREE04'
-
-Or 28 concurrent instances of each of two eight-CPU scenarios:
-
-	kvm.sh --cpus 448 --configs '28*TREE03 28*TREE04'
-
-Of course, each concurrent instance will use memory, which can be
-limited using the --memory argument, which defaults to 512M.  Small
-values for memory may require disabling the callback-flooding tests
-using the --bootargs parameter discussed below.
-
-Sometimes additional debugging is useful, and in such cases the --kconfig
-parameter to kvm.sh may be used, for example, "--kconfig 'CONFIG_KASAN=y'".
-
-Kernel boot arguments can also be supplied, for example, to control
-rcutorture's module parameters.  For example, to test a change to RCU's
-CPU stall-warning code, use "--bootargs 'rcutorture.stall_cpu=30'".
-This will of course result in the scripting reporting a failure, namely
-the resuling RCU CPU stall warning.  As noted above, reducing memory may
-require disabling rcutorture's callback-flooding tests:
-
-	kvm.sh --cpus 448 --configs '56*TREE04' --memory 128M \
-		--bootargs 'rcutorture.fwd_progress=0'
-
-Sometimes all that is needed is a full set of kernel builds.  This is
-what the --buildonly argument does.
-
-Finally, the --trust-make argument allows each kernel build to reuse what
-it can from the previous kernel build.
-
-There are additional more arcane arguments that are documented in the
-source code of the kvm.sh script.
-
-If a run contains failures, the number of buildtime and runtime failures
-is listed at the end of the kvm.sh output, which you really should redirect
-to a file.  The build products and console output of each run is kept in
-tools/testing/selftests/rcutorture/res in timestamped directories.  A
-given directory can be supplied to kvm-find-errors.sh in order to have
-it cycle you through summaries of errors and full error logs.  For example:
-
-	tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh \
-		tools/testing/selftests/rcutorture/res/2020.01.20-15.54.23
-
-However, it is often more convenient to access the files directly.
-Files pertaining to all scenarios in a run reside in the top-level
-directory (2020.01.20-15.54.23 in the example above), while per-scenario
-files reside in a subdirectory named after the scenario (for example,
-"TREE04").  If a given scenario ran more than once (as in "--configs
-'56*TREE04'" above), the directories corresponding to the second and
-subsequent runs of that scenario include a sequence number, for example,
-"TREE04.2", "TREE04.3", and so on.
-
-The most frequently used file in the top-level directory is testid.txt.
-If the test ran in a git repository, then this file contains the commit
-that was tested and any uncommitted changes in diff format.
-
-The most frequently used files in each per-scenario-run directory are:
-
-.config: This file contains the Kconfig options.
-
-Make.out: This contains build output for a specific scenario.
-
-console.log: This contains the console output for a specific scenario.
-	This file may be examined once the kernel has booted, but
-	it might not exist if the build failed.
-
-vmlinux: This contains the kernel, which can be useful with tools like
-	objdump and gdb.
-
-A number of additional files are available, but are less frequently used.
-Many are intended for debugging of rcutorture itself or of its scripting.
-
-As of v5.4, a successful run with the default set of scenarios produces
-the following summary at the end of the run on a 12-CPU system:
-
-SRCU-N ------- 804233 GPs (148.932/s) [srcu: g10008272 f0x0 ]
-SRCU-P ------- 202320 GPs (37.4667/s) [srcud: g1809476 f0x0 ]
-SRCU-t ------- 1122086 GPs (207.794/s) [srcu: g0 f0x0 ]
-SRCU-u ------- 1111285 GPs (205.794/s) [srcud: g1 f0x0 ]
-TASKS01 ------- 19666 GPs (3.64185/s) [tasks: g0 f0x0 ]
-TASKS02 ------- 20541 GPs (3.80389/s) [tasks: g0 f0x0 ]
-TASKS03 ------- 19416 GPs (3.59556/s) [tasks: g0 f0x0 ]
-TINY01 ------- 836134 GPs (154.84/s) [rcu: g0 f0x0 ] n_max_cbs: 34198
-TINY02 ------- 850371 GPs (157.476/s) [rcu: g0 f0x0 ] n_max_cbs: 2631
-TREE01 ------- 162625 GPs (30.1157/s) [rcu: g1124169 f0x0 ]
-TREE02 ------- 333003 GPs (61.6672/s) [rcu: g2647753 f0x0 ] n_max_cbs: 35844
-TREE03 ------- 306623 GPs (56.782/s) [rcu: g2975325 f0x0 ] n_max_cbs: 1496497
-CPU count limited from 16 to 12
-TREE04 ------- 246149 GPs (45.5831/s) [rcu: g1695737 f0x0 ] n_max_cbs: 434961
-TREE05 ------- 314603 GPs (58.2598/s) [rcu: g2257741 f0x2 ] n_max_cbs: 193997
-TREE07 ------- 167347 GPs (30.9902/s) [rcu: g1079021 f0x0 ] n_max_cbs: 478732
-CPU count limited from 16 to 12
-TREE09 ------- 752238 GPs (139.303/s) [rcu: g13075057 f0x0 ] n_max_cbs: 99011
diff --git a/Documentation/admin-guide/cpu-load.rst b/Documentation/admin-guide/cpu-load.rst
index 2d01ce43d2a2..ebdecf864080 100644
--- a/Documentation/admin-guide/cpu-load.rst
+++ b/Documentation/admin-guide/cpu-load.rst
@@ -105,7 +105,7 @@ References
 ----------
 
 - http://lkml.org/lkml/2007/2/12/6
-- Documentation/filesystems/proc.txt (1.8)
+- Documentation/filesystems/proc.rst (1.8)
 
 
 Thanks
diff --git a/Documentation/admin-guide/device-mapper/dm-ebs.rst b/Documentation/admin-guide/device-mapper/dm-ebs.rst
new file mode 100644
index 000000000000..534fa38e8862
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-ebs.rst
@@ -0,0 +1,51 @@
+======
+dm-ebs
+======
+
+
+This target is similar to the linear target except that it emulates
+a smaller logical block size on a device with a larger logical block
+size.  Its main purpose is to provide emulation of 512 byte sectors on
+devices that do not provide this emulation (i.e. 4K native disks).
+
+Supported emulated logical block sizes 512, 1024, 2048 and 4096.
+
+Underlying block size can be set to > 4K to test buffering larger units.
+
+
+Table parameters
+----------------
+  <dev path> <offset> <emulated sectors> [<underlying sectors>]
+
+Mandatory parameters:
+
+    <dev path>:
+        Full pathname to the underlying block-device,
+        or a "major:minor" device-number.
+    <offset>:
+        Starting sector within the device;
+        has to be a multiple of <emulated sectors>.
+    <emulated sectors>:
+        Number of sectors defining the logical block size to be emulated;
+        1, 2, 4, 8 sectors of 512 bytes supported.
+
+Optional parameter:
+
+    <underyling sectors>:
+        Number of sectors defining the logical block size of <dev path>.
+        2^N supported, e.g. 8 = emulate 8 sectors of 512 bytes = 4KiB.
+        If not provided, the logical block size of <dev path> will be used.
+
+
+Examples:
+
+Emulate 1 sector = 512 bytes logical block size on /dev/sda starting at
+offset 1024 sectors with underlying devices block size automatically set:
+
+ebs /dev/sda 1024 1
+
+Emulate 2 sector = 1KiB logical block size on /dev/sda starting at
+offset 128 sectors, enforce 2KiB underlying device block size.
+This presumes 2KiB logical blocksize on /dev/sda or less to work:
+
+ebs /dev/sda 128 2 4
diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst
index c00f9f11e3f3..8439d2ae689b 100644
--- a/Documentation/admin-guide/device-mapper/dm-integrity.rst
+++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst
@@ -182,12 +182,15 @@ fix_padding
 	space-efficient. If this option is not present, large padding is
 	used - that is for compatibility with older kernels.
 
-
-The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can
-be changed when reloading the target (load an inactive table and swap the
-tables with suspend and resume). The other arguments should not be changed
-when reloading the target because the layout of disk data depend on them
-and the reloaded target would be non-functional.
+allow_discards
+	Allow block discard requests (a.k.a. TRIM) for the integrity device.
+	Discards are only allowed to devices using internal hash.
+
+The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and
+allow_discards can be changed when reloading the target (load an inactive
+table and swap the tables with suspend and resume). The other arguments
+should not be changed when reloading the target because the layout of disk
+data depend on them and the reloaded target would be non-functional.
 
 
 The layout of the formatted block device:
diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
index 0dc2eb8e44e5..1012bd9305e9 100644
--- a/Documentation/admin-guide/dynamic-debug-howto.rst
+++ b/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -13,6 +13,11 @@ kernel code to obtain additional kernel information.  Currently, if
 ``print_hex_dump_debug()``/``print_hex_dump_bytes()`` calls can be dynamically
 enabled per-callsite.
 
+If you do not want to enable dynamic debug globally (i.e. in some embedded
+system), you may set ``CONFIG_DYNAMIC_DEBUG_CORE`` as basic support of dynamic
+debug and add ``ccflags := -DDYNAMIC_DEBUG_MODULE`` into the Makefile of any
+modules which you'd like to dynamically debug later.
+
 If ``CONFIG_DYNAMIC_DEBUG`` is not set, ``print_hex_dump_debug()`` is just
 shortcut for ``print_hex_dump(KERN_DEBUG)``.
 
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index 5a6269fb8593..58c7f9fc2396 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -93,6 +93,7 @@ configure specific aspects of kernel behavior to your liking.
    lockup-watchdogs
    LSM/index
    md
+   media/index
    mm/index
    module-signing
    mono
diff --git a/Documentation/admin-guide/init.rst b/Documentation/admin-guide/init.rst
index e89d97f31eaf..41f06a09152e 100644
--- a/Documentation/admin-guide/init.rst
+++ b/Documentation/admin-guide/init.rst
@@ -1,52 +1,48 @@
-Explaining the dreaded "No init found." boot hang message
+Explaining the "No working init found." boot hang message
 =========================================================
+:Authors: Andreas Mohr <andi at lisas period de>
+          Cristian Souza <cristianmsbr at gmail period com>
 
-OK, so you've got this pretty unintuitive message (currently located
-in init/main.c) and are wondering what the H*** went wrong.
-Some high-level reasons for failure (listed roughly in order of execution)
-to load the init binary are:
-
-A) Unable to mount root FS
-B) init binary doesn't exist on rootfs
-C) broken console device
-D) binary exists but dependencies not available
-E) binary cannot be loaded
-
-Detailed explanations:
-
-A) Set "debug" kernel parameter (in bootloader config file or CONFIG_CMDLINE)
-   to get more detailed kernel messages.
-B) make sure you have the correct root FS type
-   (and ``root=`` kernel parameter points to the correct partition),
-   required drivers such as storage hardware (such as SCSI or USB!)
-   and filesystem (ext3, jffs2 etc.) are builtin (alternatively as modules,
-   to be pre-loaded by an initrd)
-C) Possibly a conflict in ``console= setup`` --> initial console unavailable.
-   E.g. some serial consoles are unreliable due to serial IRQ issues (e.g.
-   missing interrupt-based configuration).
+This document provides some high-level reasons for failure
+(listed roughly in order of execution) to load the init binary.
+
+1) **Unable to mount root FS**: Set "debug" kernel parameter (in bootloader
+   config file or CONFIG_CMDLINE) to get more detailed kernel messages.
+
+2) **init binary doesn't exist on rootfs**: Make sure you have the correct
+   root FS type (and ``root=`` kernel parameter points to the correct
+   partition), required drivers such as storage hardware (such as SCSI or
+   USB!) and filesystem (ext3, jffs2, etc.) are builtin (alternatively as
+   modules, to be pre-loaded by an initrd).
+
+3) **Broken console device**: Possibly a conflict in ``console= setup``
+   --> initial console unavailable. E.g. some serial consoles are unreliable
+   due to serial IRQ issues (e.g. missing interrupt-based configuration).
    Try using a different ``console= device`` or e.g. ``netconsole=``.
-D) e.g. required library dependencies of the init binary such as
-   ``/lib/ld-linux.so.2`` missing or broken. Use
-   ``readelf -d <INIT>|grep NEEDED`` to find out which libraries are required.
-E) make sure the binary's architecture matches your hardware.
-   E.g. i386 vs. x86_64 mismatch, or trying to load x86 on ARM hardware.
-   In case you tried loading a non-binary file here (shell script?),
-   you should make sure that the script specifies an interpreter in its shebang
-   header line (``#!/...``) that is fully working (including its library
-   dependencies). And before tackling scripts, better first test a simple
-   non-script binary such as ``/bin/sh`` and confirm its successful execution.
-   To find out more, add code ``to init/main.c`` to display kernel_execve()s
-   return values.
+
+4) **Binary exists but dependencies not available**: E.g. required library
+   dependencies of the init binary such as ``/lib/ld-linux.so.2`` missing or
+   broken. Use ``readelf -d <INIT>|grep NEEDED`` to find out which libraries
+   are required.
+
+5) **Binary cannot be loaded**: Make sure the binary's architecture matches
+   your hardware. E.g. i386 vs. x86_64 mismatch, or trying to load x86 on ARM
+   hardware. In case you tried loading a non-binary file here (shell script?),
+   you should make sure that the script specifies an interpreter in its
+   shebang header line (``#!/...``) that is fully working (including its
+   library dependencies). And before tackling scripts, better first test a
+   simple non-script binary such as ``/bin/sh`` and confirm its successful
+   execution. To find out more, add code ``to init/main.c`` to display
+   kernel_execve()s return values.
 
 Please extend this explanation whenever you find new failure causes
 (after all loading the init binary is a CRITICAL and hard transition step
-which needs to be made as painless as possible), then submit patch to LKML.
+which needs to be made as painless as possible), then submit a patch to LKML.
 Further TODOs:
 
 - Implement the various ``run_init_process()`` invocations via a struct array
   which can then store the ``kernel_execve()`` result value and on failure
   log it all by iterating over **all** results (very important usability fix).
-- try to make the implementation itself more helpful in general,
-  e.g. by providing additional error messages at affected places.
+- Try to make the implementation itself more helpful in general, e.g. by
+  providing additional error messages at affected places.
 
-Andreas Mohr <andi at lisas period de>
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 7bc83f3d9bdf..25644daa36ea 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -356,7 +356,7 @@
 			      shot down by NMI
 
 	autoconf=	[IPV6]
-			See Documentation/networking/ipv6.txt.
+			See Documentation/networking/ipv6.rst.
 
 	show_lapic=	[APIC,X86] Advanced Programmable Interrupt Controller
 			Limit apic dumping. The parameter defines the maximal
@@ -458,7 +458,7 @@
 	bttv.card=	[HW,V4L] bttv (bt848 + bt878 based grabber cards)
 	bttv.radio=	Most important insmod options are available as
 			kernel args too.
-	bttv.pll=	See Documentation/media/v4l-drivers/bttv.rst
+	bttv.pll=	See Documentation/admin-guide/media/bttv.rst
 	bttv.tuner=
 
 	bulk_remove=off	[PPC]  This parameter disables the use of the pSeries
@@ -831,15 +831,18 @@
 
 	decnet.addr=	[HW,NET]
 			Format: <area>[,<node>]
-			See also Documentation/networking/decnet.txt.
+			See also Documentation/networking/decnet.rst.
 
 	default_hugepagesz=
-			[same as hugepagesz=] The size of the default
-			HugeTLB page size. This is the size represented by
-			the legacy /proc/ hugepages APIs, used for SHM, and
-			default size when mounting hugetlbfs filesystems.
-			Defaults to the default architecture's huge page size
-			if not specified.
+			[HW] The size of the default HugeTLB page. This is
+			the size represented by the legacy /proc/ hugepages
+			APIs.  In addition, this is the default hugetlb size
+			used for shmget(), mmap() and mounting hugetlbfs
+			filesystems.  If not specified, defaults to the
+			architecture's default huge page size.  Huge page
+			sizes are architecture dependent.  See also
+			Documentation/admin-guide/mm/hugetlbpage.rst.
+			Format: size[KMG]
 
 	deferred_probe_timeout=
 			[KNL] Debugging option to set a timeout in seconds for
@@ -872,7 +875,7 @@
 			miss to occur.
 
 	disable=	[IPV6]
-			See Documentation/networking/ipv6.txt.
+			See Documentation/networking/ipv6.rst.
 
 	hardened_usercopy=
                         [KNL] Under CONFIG_HARDENED_USERCOPY, whether
@@ -912,7 +915,7 @@
 			to workaround buggy firmware.
 
 	disable_ipv6=	[IPV6]
-			See Documentation/networking/ipv6.txt.
+			See Documentation/networking/ipv6.rst.
 
 	disable_mtrr_cleanup [X86]
 			The kernel tries to adjust MTRR layout from continuous
@@ -1479,19 +1482,30 @@
 			hugepages using the cma allocator. If enabled, the
 			boot-time allocation of gigantic hugepages is skipped.
 
-	hugepages=	[HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
-	hugepagesz=	[HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
-			On x86-64 and powerpc, this option can be specified
-			multiple times interleaved with hugepages= to reserve
-			huge pages of different sizes. Valid pages sizes on
-			x86-64 are 2M (when the CPU supports "pse") and 1G
-			(when the CPU supports the "pdpe1gb" cpuinfo flag).
+	hugepages=	[HW] Number of HugeTLB pages to allocate at boot.
+			If this follows hugepagesz (below), it specifies
+			the number of pages of hugepagesz to be allocated.
+			If this is the first HugeTLB parameter on the command
+			line, it specifies the number of pages to allocate for
+			the default huge page size.  See also
+			Documentation/admin-guide/mm/hugetlbpage.rst.
+			Format: <integer>
+
+	hugepagesz=
+			[HW] The size of the HugeTLB pages.  This is used in
+			conjunction with hugepages (above) to allocate huge
+			pages of a specific size at boot.  The pair
+			hugepagesz=X hugepages=Y can be specified once for
+			each supported huge page size. Huge page sizes are
+			architecture dependent.  See also
+			Documentation/admin-guide/mm/hugetlbpage.rst.
+			Format: size[KMG]
 
 	hung_task_panic=
 			[KNL] Should the hung task detector generate panics.
 			Format: <integer>
 
-			A nonzero value instructs the kernel to panic when a
+			A value of 1 instructs the kernel to panic when a
 			hung task is detected. The default value is controlled
 			by the CONFIG_BOOTPARAM_HUNG_TASK_PANIC build-time
 			option. The value selected by this boot parameter can
@@ -1748,6 +1762,13 @@
 
 	initrd=		[BOOT] Specify the location of the initial ramdisk
 
+	initrdmem=	[KNL] Specify a physical address and size from which to
+			load the initrd. If an initrd is compiled in or
+			specified in the bootparams, it takes priority over this
+			setting.
+			Format: ss[KMG],nn[KMG]
+			Default is 0, 0
+
 	init_on_alloc=	[MM] Fill newly allocated pages and heap objects with
 			zeroes.
 			Format: 0 | 1
@@ -2705,7 +2726,7 @@
 			See Documentation/admin-guide/pm/sleep-states.rst.
 
 	meye.*=		[HW] Set MotionEye Camera parameters
-			See Documentation/media/v4l-drivers/meye.rst.
+			See Documentation/admin-guide/media/meye.rst.
 
 	mfgpt_irq=	[IA-32] Specify the IRQ to use for the
 			Multi-Function General Purpose Timers on AMD Geode
@@ -3669,6 +3690,8 @@
 				may put more devices in an IOMMU group.
 		force_floating	[S390] Force usage of floating interrupts.
 		nomio		[S390] Do not use MIO instructions.
+		norid		[S390] ignore the RID field and force use of
+				one PCI domain per PCI function
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.
@@ -4197,6 +4220,20 @@
 			Set time (jiffies) between CPU-hotplug operations,
 			or zero to disable CPU-hotplug testing.
 
+	rcutorture.read_exit= [KNL]
+			Set the number of read-then-exit kthreads used
+			to test the interaction of RCU updaters and
+			task-exit processing.
+
+	rcutorture.read_exit_burst= [KNL]
+			The number of times in a given read-then-exit
+			episode that a set of read-then-exit kthreads
+			is spawned.
+
+	rcutorture.read_exit_delay= [KNL]
+			The delay, in seconds, between successive
+			read-then-exit testing episodes.
+
 	rcutorture.shuffle_interval= [KNL]
 			Set task-shuffle interval (s).  Shuffling tasks
 			allows some CPUs to go into dyntick-idle mode
@@ -4210,12 +4247,24 @@
 			Duration of CPU stall (s) to test RCU CPU stall
 			warnings, zero to disable.
 
+	rcutorture.stall_cpu_block= [KNL]
+			Sleep while stalling if set.  This will result
+			in warnings from preemptible RCU in addition
+			to any other stall-related activity.
+
 	rcutorture.stall_cpu_holdoff= [KNL]
 			Time to wait (s) after boot before inducing stall.
 
 	rcutorture.stall_cpu_irqsoff= [KNL]
 			Disable interrupts while stalling if set.
 
+	rcutorture.stall_gp_kthread= [KNL]
+			Duration (s) of forced sleep within RCU
+			grace-period kthread to test RCU CPU stall
+			warnings, zero to disable.  If both stall_cpu
+			and stall_gp_kthread are specified, the
+			kthread is starved first, then the CPU.
+
 	rcutorture.stat_interval= [KNL]
 			Time (s) between statistics printk()s.
 
@@ -4286,6 +4335,13 @@
 			only normal grace-period primitives.  No effect
 			on CONFIG_TINY_RCU kernels.
 
+	rcupdate.rcu_task_ipi_delay= [KNL]
+			Set time in jiffies during which RCU tasks will
+			avoid sending IPIs, starting with the beginning
+			of a given grace period.  Setting a large
+			number avoids disturbing real-time workloads,
+			but lengthens grace periods.
+
 	rcupdate.rcu_task_stall_timeout= [KNL]
 			Set timeout in jiffies for RCU task stall warning
 			messages.  Disable with a value less than or equal
@@ -4891,6 +4947,15 @@
 
 	switches=	[HW,M68k]
 
+	sysctl.*=	[KNL]
+			Set a sysctl parameter, right before loading the init
+			process, as if the value was written to the respective
+			/proc/sys/... file. Both '.' and '/' are recognized as
+			separators. Unrecognized parameters and invalid values
+			are reported in the kernel log. Sysctls registered
+			later by a loaded module cannot be set this way.
+			Example: sysctl.vm.swappiness=40
+
 	sysfs.deprecated=0|1 [KNL]
 			Enable/disable old style sysfs layout for old udev
 			on older distributions. When this option is enabled
@@ -4910,7 +4975,7 @@
 			Set the number of tcp_metrics_hash slots.
 			Default value is 8192 or 16384 depending on total
 			ram pages. This is used to specify the TCP metrics
-			cache size. See Documentation/networking/ip-sysctl.txt
+			cache size. See Documentation/networking/ip-sysctl.rst
 			"tcp_no_metrics_save" section for more details.
 
 	tdfx=		[HW,DRM]
diff --git a/Documentation/admin-guide/media/au0828-cardlist.rst b/Documentation/admin-guide/media/au0828-cardlist.rst
new file mode 100644
index 000000000000..aaaadc934e7a
--- /dev/null
+++ b/Documentation/admin-guide/media/au0828-cardlist.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+AU0828 cards list
+=================
+
+.. tabularcolumns:: |p{1.4cm}|p{6.5cm}|p{10.0cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - USB IDs
+
+   * - 0
+     - Unknown board
+     -
+
+   * - 1
+     - Hauppauge HVR950Q
+     - 2040:7200, 2040:7210, 2040:7217, 2040:721b, 2040:721e, 2040:721f, 2040:7280, 0fd9:0008, 2040:7260, 2040:7213, 2040:7270
+
+   * - 2
+     - Hauppauge HVR850
+     - 2040:7240
+
+   * - 3
+     - DViCO FusionHDTV USB
+     - 0fe9:d620
+
+   * - 4
+     - Hauppauge HVR950Q rev xxF8
+     - 2040:7201, 2040:7211, 2040:7281
+
+   * - 5
+     - Hauppauge Woodbury
+     - 05e1:0480, 2040:8200
diff --git a/Documentation/admin-guide/media/avermedia.rst b/Documentation/admin-guide/media/avermedia.rst
new file mode 100644
index 000000000000..93ff74002d20
--- /dev/null
+++ b/Documentation/admin-guide/media/avermedia.rst
@@ -0,0 +1,94 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Avermedia DVB-T on BT878 Release Notes
+======================================
+
+February 14th 2006
+
+.. note::
+
+   Several other Avermedia devices are supported. For a more
+   broader and updated content about that, please check:
+
+   https://linuxtv.org/wiki/index.php/AVerMedia
+
+The Avermedia DVB-T
+~~~~~~~~~~~~~~~~~~~
+
+The Avermedia DVB-T is a budget PCI DVB card. It has 3 inputs:
+
+* RF Tuner Input
+* Composite Video Input (RCA Jack)
+* SVIDEO Input (Mini-DIN)
+
+The  RF  Tuner  Input  is the input to the tuner module of the
+card.  The  Tuner  is  otherwise known as the "Frontend" . The
+Frontend of the Avermedia DVB-T is a Microtune 7202D. A timely
+post  to  the  linux-dvb  mailing  list  ascertained  that the
+Microtune  7202D  is  supported  by the sp887x driver which is
+found in the dvb-hw CVS module.
+
+The  DVB-T card is based around the BT878 chip which is a very
+common multimedia bridge and often found on Analogue TV cards.
+There is no on-board MPEG2 decoder, which means that all MPEG2
+decoding  must  be done in software, or if you have one, on an
+MPEG2 hardware decoding card or chipset.
+
+
+Getting the card going
+~~~~~~~~~~~~~~~~~~~~~~
+
+At  this  stage,  it  has  not  been  able  to  ascertain  the
+functionality  of the remaining device nodes in respect of the
+Avermedia  DVBT.  However,  full  functionality  in respect of
+tuning,  receiving  and  supplying  the  MPEG2  data stream is
+possible  with the currently available versions of the driver.
+It  may be possible that additional functionality is available
+from  the  card  (i.e.  viewing the additional analogue inputs
+that  the card presents), but this has not been tested yet. If
+I get around to this, I'll update the document with whatever I
+find.
+
+To  power  up  the  card,  load  the  following modules in the
+following order:
+
+* modprobe bttv (normally loaded automatically)
+* modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)
+
+Insertion  of  these  modules  into  the  running  kernel will
+activate the appropriate DVB device nodes. It is then possible
+to start accessing the card with utilities such as scan, tzap,
+dvbstream etc.
+
+The frontend module sp887x.o, requires an external   firmware.
+Please use  the  command "get_dvb_firmware sp887x" to download
+it. Then copy it to /usr/lib/hotplug/firmware or /lib/firmware/
+(depending on configuration of firmware hotplug).
+
+Known Limitations
+~~~~~~~~~~~~~~~~~
+
+At  present  I can say with confidence that the frontend tunes
+via /dev/dvb/adapter{x}/frontend0 and supplies an MPEG2 stream
+via   /dev/dvb/adapter{x}/dvr0.   I   have   not   tested  the
+functionality  of any other part of the card yet. I will do so
+over time and update this document.
+
+There  are some limitations in the i2c layer due to a returned
+error message inconsistency. Although this generates errors in
+dmesg  and  the  system logs, it does not appear to affect the
+ability of the frontend to function correctly.
+
+Further Update
+~~~~~~~~~~~~~~
+
+dvbstream  and  VideoLAN  Client on windows works a treat with
+DVB,  in  fact  this  is  currently  serving as my main way of
+viewing  DVB-T  at  the  moment.  Additionally, VLC is happily
+decoding  HDTV  signals,  although  the PC is dropping the odd
+frame here and there - I assume due to processing capability -
+as all the decoding is being done under windows in software.
+
+Many  thanks to Nigel Pearson for the updates to this document
+since the recent revision of the driver.
diff --git a/Documentation/admin-guide/media/bt8xx.rst b/Documentation/admin-guide/media/bt8xx.rst
new file mode 100644
index 000000000000..d6cf81d83d61
--- /dev/null
+++ b/Documentation/admin-guide/media/bt8xx.rst
@@ -0,0 +1,156 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+How to get the bt8xx cards working
+==================================
+
+Authors:
+	 Richard Walker,
+	 Jamie Honan,
+	 Michael Hunold,
+	 Manu Abraham,
+	 Uwe Bugla,
+	 Michael Krufky
+
+General information
+-------------------
+
+This class of cards has a bt878a as the PCI interface, and require the bttv driver
+for accessing the i2c bus and the gpio pins of the bt8xx chipset.
+
+Please see :doc:`bttv-cardlist` for a complete list of Cards based on the
+Conexant Bt8xx PCI bridge supported by the Linux Kernel.
+
+In order to be able to compile the kernel, some config options should be
+enabled::
+
+    ./scripts/config -e PCI
+    ./scripts/config -e INPUT
+    ./scripts/config -m I2C
+    ./scripts/config -m MEDIA_SUPPORT
+    ./scripts/config -e MEDIA_PCI_SUPPORT
+    ./scripts/config -e MEDIA_ANALOG_TV_SUPPORT
+    ./scripts/config -e MEDIA_DIGITAL_TV_SUPPORT
+    ./scripts/config -e MEDIA_RADIO_SUPPORT
+    ./scripts/config -e RC_CORE
+    ./scripts/config -m VIDEO_BT848
+    ./scripts/config -m DVB_BT8XX
+
+If you want to automatically support all possible variants of the Bt8xx
+cards, you should also do::
+
+    ./scripts/config -e MEDIA_SUBDRV_AUTOSELECT
+
+.. note::
+
+   Please use the following options with care as deselection of drivers which
+   are in fact necessary may result in DVB devices that cannot be tuned due
+   to lack of driver support.
+
+If your goal is to just support an specific board, you may, instead,
+disable MEDIA_SUBDRV_AUTOSELECT and manually select the frontend drivers
+required by your board. With that, you can save some RAM.
+
+You can do that by calling make xconfig/qconfig/menuconfig and look at
+the options on those menu options (only enabled if
+``Autoselect ancillary drivers`` is disabled:
+
+#) ``Device drivers`` => ``Multimedia support`` => ``Customize TV tuners``
+#) ``Device drivers`` => ``Multimedia support`` => ``Customize DVB frontends``
+
+Then, on each of the above menu, please select your card-specific
+frontend and tuner modules.
+
+
+Loading Modules
+---------------
+
+Regular case: If the bttv driver detects a bt8xx-based DVB card, all
+frontend and backend modules will be loaded automatically.
+
+Exceptions are:
+
+- Old TV cards without EEPROMs, sharing a common PCI ID;
+- Old TwinHan DST cards or clones with or without CA slot and not
+  containing an Eeprom.
+
+In the following cases overriding the PCI type detection for bttv and
+for dvb-bt8xx drivers by passing modprobe parameters may be necessary.
+
+Running TwinHan and Clones
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+As shown at :doc:`bttv-cardlist`, TwinHan and
+clones use ``card=113`` modprobe parameter. So, in order to properly
+detect it for devices without EEPROM, you should use::
+
+	$ modprobe bttv card=113
+	$ modprobe dst
+
+Useful parameters for verbosity level and debugging the dst module::
+
+	verbose=0:		messages are disabled
+		1:		only error messages are displayed
+		2:		notifications are displayed
+		3:		other useful messages are displayed
+		4:		debug setting
+	dst_addons=0:		card is a free to air (FTA) card only
+		0x20:	card has a conditional access slot for scrambled channels
+	dst_algo=0:		(default) Software tuning algorithm
+	         1:		Hardware tuning algorithm
+
+
+The autodetected values are determined by the cards' "response string".
+
+In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI].
+
+For bug reports please send in a complete log with verbose=4 activated.
+Please also see :doc:`ci`.
+
+Running multiple cards
+~~~~~~~~~~~~~~~~~~~~~~
+
+See :doc:`bttv-cardlist` for a complete list of
+Card ID. Some examples:
+
+	===========================	===
+	Brand name			ID
+	===========================	===
+	Pinnacle PCTV Sat		 94
+	Nebula Electronics Digi TV	104
+	pcHDTV HD-2000 TV		112
+	Twinhan DST and clones		113
+	Avermedia AverTV DVB-T 77:	123
+	Avermedia AverTV DVB-T 761	124
+	DViCO FusionHDTV DVB-T Lite	128
+	DViCO FusionHDTV 5 Lite		135
+	===========================	===
+
+.. note::
+
+   When you have multiple cards, the order of the card ID should
+   match the order where they're detected by the system. Please notice
+   that removing/inserting other PCI cards may change the detection
+   order.
+
+Example::
+
+	$ modprobe bttv card=113 card=135
+
+In case of further problems please subscribe and send questions to
+the mailing list: linux-media@vger.kernel.org.
+
+Probing the cards with broken PCI subsystem ID
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There are some TwinHan cards whose EEPROM has become corrupted for some
+reason. The cards do not have a correct PCI subsystem ID.
+Still, it is possible to force probing the cards with::
+
+	$ echo 109e 0878 $subvendor $subdevice > \
+		/sys/bus/pci/drivers/bt878/new_id
+
+The two numbers there are::
+
+	109e: PCI_VENDOR_ID_BROOKTREE
+	0878: PCI_DEVICE_ID_BROOKTREE_878
diff --git a/Documentation/admin-guide/media/bttv-cardlist.rst b/Documentation/admin-guide/media/bttv-cardlist.rst
new file mode 100644
index 000000000000..f5806856b5a1
--- /dev/null
+++ b/Documentation/admin-guide/media/bttv-cardlist.rst
@@ -0,0 +1,683 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+BTTV cards list
+===============
+
+.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - PCI IDs
+
+   * - 0
+     -  *** UNKNOWN/GENERIC ***
+     -
+
+   * - 1
+     - MIRO PCTV
+     -
+
+   * - 2
+     - Hauppauge (bt848)
+     -
+
+   * - 3
+     - STB, Gateway P/N 6000699 (bt848)
+     -
+
+   * - 4
+     - Intel Create and Share PCI/ Smart Video Recorder III
+     -
+
+   * - 5
+     - Diamond DTV2000
+     -
+
+   * - 6
+     - AVerMedia TVPhone
+     -
+
+   * - 7
+     - MATRIX-Vision MV-Delta
+     -
+
+   * - 8
+     - Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26
+     -
+
+   * - 9
+     - IMS/IXmicro TurboTV
+     -
+
+   * - 10
+     - Hauppauge (bt878)
+     - 0070:13eb, 0070:3900, 2636:10b4
+
+   * - 11
+     - MIRO PCTV pro
+     -
+
+   * - 12
+     - ADS Technologies Channel Surfer TV (bt848)
+     -
+
+   * - 13
+     - AVerMedia TVCapture 98
+     - 1461:0002, 1461:0004, 1461:0300
+
+   * - 14
+     - Aimslab Video Highway Xtreme (VHX)
+     -
+
+   * - 15
+     - Zoltrix TV-Max
+     - a1a0:a0fc
+
+   * - 16
+     - Prolink Pixelview PlayTV (bt878)
+     -
+
+   * - 17
+     - Leadtek WinView 601
+     -
+
+   * - 18
+     - AVEC Intercapture
+     -
+
+   * - 19
+     - Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)
+     -
+
+   * - 20
+     - CEI Raffles Card
+     -
+
+   * - 21
+     - Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50
+     -
+
+   * - 22
+     - Askey CPH050/ Phoebe Tv Master + FM
+     - 14ff:3002
+
+   * - 23
+     - Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878
+     - 14c7:0101
+
+   * - 24
+     - Askey CPH05X/06X (bt878) [many vendors]
+     - 144f:3002, 144f:3005, 144f:5000, 14ff:3000
+
+   * - 25
+     - Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar
+     -
+
+   * - 26
+     - Hauppauge WinCam newer (bt878)
+     -
+
+   * - 27
+     - Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50
+     -
+
+   * - 28
+     - Terratec TerraTV+ Version 1.1 (bt878)
+     - 153b:1127, 1852:1852
+
+   * - 29
+     - Imagenation PXC200
+     - 1295:200a
+
+   * - 30
+     - Lifeview FlyVideo 98 LR50
+     - 1f7f:1850
+
+   * - 31
+     - Formac iProTV, Formac ProTV I (bt848)
+     -
+
+   * - 32
+     - Intel Create and Share PCI/ Smart Video Recorder III
+     -
+
+   * - 33
+     - Terratec TerraTValue Version Bt878
+     - 153b:1117, 153b:1118, 153b:1119, 153b:111a, 153b:1134, 153b:5018
+
+   * - 34
+     - Leadtek WinFast 2000/ WinFast 2000 XP
+     - 107d:6606, 107d:6609, 6606:217d, f6ff:fff6
+
+   * - 35
+     - Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II
+     - 1851:1850, 1851:a050
+
+   * - 36
+     - Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner
+     - 1852:1852
+
+   * - 37
+     - Prolink PixelView PlayTV pro
+     -
+
+   * - 38
+     - Askey CPH06X TView99
+     - 144f:3000, 144f:a005, a04f:a0fc
+
+   * - 39
+     - Pinnacle PCTV Studio/Rave
+     - 11bd:0012, bd11:1200, bd11:ff00, 11bd:ff12
+
+   * - 40
+     - STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100
+     - 10b4:2636, 10b4:2645, 121a:3060
+
+   * - 41
+     - AVerMedia TVPhone 98
+     - 1461:0001, 1461:0003
+
+   * - 42
+     - ProVideo PV951
+     - aa0c:146c
+
+   * - 43
+     - Little OnAir TV
+     -
+
+   * - 44
+     - Sigma TVII-FM
+     -
+
+   * - 45
+     - MATRIX-Vision MV-Delta 2
+     -
+
+   * - 46
+     - Zoltrix Genie TV/FM
+     - 15b0:4000, 15b0:400a, 15b0:400d, 15b0:4010, 15b0:4016
+
+   * - 47
+     - Terratec TV/Radio+
+     - 153b:1123
+
+   * - 48
+     - Askey CPH03x/ Dynalink Magic TView
+     -
+
+   * - 49
+     - IODATA GV-BCTV3/PCI
+     - 10fc:4020
+
+   * - 50
+     - Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP
+     -
+
+   * - 51
+     - Eagle Wireless Capricorn2 (bt878A)
+     -
+
+   * - 52
+     - Pinnacle PCTV Studio Pro
+     -
+
+   * - 53
+     - Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS
+     -
+
+   * - 54
+     - Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]
+     -
+
+   * - 55
+     - Askey CPH031/ BESTBUY Easy TV
+     -
+
+   * - 56
+     - Lifeview FlyVideo 98FM LR50
+     - a051:41a0
+
+   * - 57
+     - GrandTec 'Grand Video Capture' (Bt848)
+     - 4344:4142
+
+   * - 58
+     - Askey CPH060/ Phoebe TV Master Only (No FM)
+     -
+
+   * - 59
+     - Askey CPH03x TV Capturer
+     -
+
+   * - 60
+     - Modular Technology MM100PCTV
+     -
+
+   * - 61
+     - AG Electronics GMV1
+     - 15cb:0101
+
+   * - 62
+     - Askey CPH061/ BESTBUY Easy TV (bt878)
+     -
+
+   * - 63
+     - ATI TV-Wonder
+     - 1002:0001
+
+   * - 64
+     - ATI TV-Wonder VE
+     - 1002:0003
+
+   * - 65
+     - Lifeview FlyVideo 2000S LR90
+     -
+
+   * - 66
+     - Terratec TValueRadio
+     - 153b:1135, 153b:ff3b
+
+   * - 67
+     - IODATA GV-BCTV4/PCI
+     - 10fc:4050
+
+   * - 68
+     - 3Dfx VoodooTV FM (Euro)
+     - 10b4:2637
+
+   * - 69
+     - Active Imaging AIMMS
+     -
+
+   * - 70
+     - Prolink Pixelview PV-BT878P+ (Rev.4C,8E)
+     -
+
+   * - 71
+     - Lifeview FlyVideo 98EZ (capture only) LR51
+     - 1851:1851
+
+   * - 72
+     - Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)
+     - 1554:4011
+
+   * - 73
+     - Sensoray 311/611
+     - 6000:0311, 6000:0611
+
+   * - 74
+     - RemoteVision MX (RV605)
+     -
+
+   * - 75
+     - Powercolor MTV878/ MTV878R/ MTV878F
+     -
+
+   * - 76
+     - Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)
+     - 0e11:0079
+
+   * - 77
+     - GrandTec Multi Capture Card (Bt878)
+     -
+
+   * - 78
+     - Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF
+     - 0a01:17de
+
+   * - 79
+     - DSP Design TCVIDEO
+     -
+
+   * - 80
+     - Hauppauge WinTV PVR
+     - 0070:4500
+
+   * - 81
+     - IODATA GV-BCTV5/PCI
+     - 10fc:4070, 10fc:d018
+
+   * - 82
+     - Osprey 100/150 (878)
+     - 0070:ff00
+
+   * - 83
+     - Osprey 100/150 (848)
+     -
+
+   * - 84
+     - Osprey 101 (848)
+     -
+
+   * - 85
+     - Osprey 101/151
+     -
+
+   * - 86
+     - Osprey 101/151 w/ svid
+     -
+
+   * - 87
+     - Osprey 200/201/250/251
+     -
+
+   * - 88
+     - Osprey 200/250
+     - 0070:ff01
+
+   * - 89
+     - Osprey 210/220/230
+     -
+
+   * - 90
+     - Osprey 500
+     - 0070:ff02
+
+   * - 91
+     - Osprey 540
+     - 0070:ff04
+
+   * - 92
+     - Osprey 2000
+     - 0070:ff03
+
+   * - 93
+     - IDS Eagle
+     -
+
+   * - 94
+     - Pinnacle PCTV Sat
+     - 11bd:001c
+
+   * - 95
+     - Formac ProTV II (bt878)
+     -
+
+   * - 96
+     - MachTV
+     -
+
+   * - 97
+     - Euresys Picolo
+     -
+
+   * - 98
+     - ProVideo PV150
+     - aa00:1460, aa01:1461, aa02:1462, aa03:1463, aa04:1464, aa05:1465, aa06:1466, aa07:1467
+
+   * - 99
+     - AD-TVK503
+     -
+
+   * - 100
+     - Hercules Smart TV Stereo
+     -
+
+   * - 101
+     - Pace TV & Radio Card
+     -
+
+   * - 102
+     - IVC-200
+     - 0000:a155, 0001:a155, 0002:a155, 0003:a155, 0100:a155, 0101:a155, 0102:a155, 0103:a155, 0800:a155, 0801:a155, 0802:a155, 0803:a155
+
+   * - 103
+     - Grand X-Guard / Trust 814PCI
+     - 0304:0102
+
+   * - 104
+     - Nebula Electronics DigiTV
+     - 0071:0101
+
+   * - 105
+     - ProVideo PV143
+     - aa00:1430, aa00:1431, aa00:1432, aa00:1433, aa03:1433
+
+   * - 106
+     - PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)
+     -
+
+   * - 107
+     - PHYTEC VD-009-X1 VD-011 Combi (bt878)
+     -
+
+   * - 108
+     - PHYTEC VD-009 MiniDIN (bt878)
+     -
+
+   * - 109
+     - PHYTEC VD-009 Combi (bt878)
+     -
+
+   * - 110
+     - IVC-100
+     - ff00:a132
+
+   * - 111
+     - IVC-120G
+     - ff00:a182, ff01:a182, ff02:a182, ff03:a182, ff04:a182, ff05:a182, ff06:a182, ff07:a182, ff08:a182, ff09:a182, ff0a:a182, ff0b:a182, ff0c:a182, ff0d:a182, ff0e:a182, ff0f:a182
+
+   * - 112
+     - pcHDTV HD-2000 TV
+     - 7063:2000
+
+   * - 113
+     - Twinhan DST + clones
+     - 11bd:0026, 1822:0001, 270f:fc00, 1822:0026
+
+   * - 114
+     - Winfast VC100
+     - 107d:6607
+
+   * - 115
+     - Teppro TEV-560/InterVision IV-560
+     -
+
+   * - 116
+     - SIMUS GVC1100
+     - aa6a:82b2
+
+   * - 117
+     - NGS NGSTV+
+     -
+
+   * - 118
+     - LMLBT4
+     -
+
+   * - 119
+     - Tekram M205 PRO
+     -
+
+   * - 120
+     - Conceptronic CONTVFMi
+     -
+
+   * - 121
+     - Euresys Picolo Tetra
+     - 1805:0105, 1805:0106, 1805:0107, 1805:0108
+
+   * - 122
+     - Spirit TV Tuner
+     -
+
+   * - 123
+     - AVerMedia AVerTV DVB-T 771
+     - 1461:0771
+
+   * - 124
+     - AverMedia AverTV DVB-T 761
+     - 1461:0761
+
+   * - 125
+     - MATRIX Vision Sigma-SQ
+     -
+
+   * - 126
+     - MATRIX Vision Sigma-SLC
+     -
+
+   * - 127
+     - APAC Viewcomp 878(AMAX)
+     -
+
+   * - 128
+     - DViCO FusionHDTV DVB-T Lite
+     - 18ac:db10, 18ac:db11
+
+   * - 129
+     - V-Gear MyVCD
+     -
+
+   * - 130
+     - Super TV Tuner
+     -
+
+   * - 131
+     - Tibet Systems 'Progress DVR' CS16
+     -
+
+   * - 132
+     - Kodicom 4400R (master)
+     -
+
+   * - 133
+     - Kodicom 4400R (slave)
+     -
+
+   * - 134
+     - Adlink RTV24
+     -
+
+   * - 135
+     - DViCO FusionHDTV 5 Lite
+     - 18ac:d500
+
+   * - 136
+     - Acorp Y878F
+     - 9511:1540
+
+   * - 137
+     - Conceptronic CTVFMi v2
+     - 036e:109e
+
+   * - 138
+     - Prolink Pixelview PV-BT878P+ (Rev.2E)
+     -
+
+   * - 139
+     - Prolink PixelView PlayTV MPEG2 PV-M4900
+     -
+
+   * - 140
+     - Osprey 440
+     - 0070:ff07
+
+   * - 141
+     - Asound Skyeye PCTV
+     -
+
+   * - 142
+     - Sabrent TV-FM (bttv version)
+     -
+
+   * - 143
+     - Hauppauge ImpactVCB (bt878)
+     - 0070:13eb
+
+   * - 144
+     - MagicTV
+     -
+
+   * - 145
+     - SSAI Security Video Interface
+     - 4149:5353
+
+   * - 146
+     - SSAI Ultrasound Video Interface
+     - 414a:5353
+
+   * - 147
+     - VoodooTV 200 (USA)
+     - 121a:3000
+
+   * - 148
+     - DViCO FusionHDTV 2
+     - dbc0:d200
+
+   * - 149
+     - Typhoon TV-Tuner PCI (50684)
+     -
+
+   * - 150
+     - Geovision GV-600
+     - 008a:763c
+
+   * - 151
+     - Kozumi KTV-01C
+     -
+
+   * - 152
+     - Encore ENL TV-FM-2
+     - 1000:1801
+
+   * - 153
+     - PHYTEC VD-012 (bt878)
+     -
+
+   * - 154
+     - PHYTEC VD-012-X1 (bt878)
+     -
+
+   * - 155
+     - PHYTEC VD-012-X2 (bt878)
+     -
+
+   * - 156
+     - IVCE-8784
+     - 0000:f050, 0001:f050, 0002:f050, 0003:f050
+
+   * - 157
+     - Geovision GV-800(S) (master)
+     - 800a:763d
+
+   * - 158
+     - Geovision GV-800(S) (slave)
+     - 800b:763d, 800c:763d, 800d:763d
+
+   * - 159
+     - ProVideo PV183
+     - 1830:1540, 1831:1540, 1832:1540, 1833:1540, 1834:1540, 1835:1540, 1836:1540, 1837:1540
+
+   * - 160
+     - Tongwei Video Technology TD-3116
+     - f200:3116
+
+   * - 161
+     - Aposonic W-DVR
+     - 0279:0228
+
+   * - 162
+     - Adlink MPG24
+     -
+
+   * - 163
+     - Bt848 Capture 14MHz
+     -
+
+   * - 164
+     - CyberVision CV06 (SV)
+     -
+
+   * - 165
+     - Kworld V-Stream Xpert TV PVR878
+     -
+
+   * - 166
+     - PCI-8604PW
+     -
diff --git a/Documentation/admin-guide/media/bttv.rst b/Documentation/admin-guide/media/bttv.rst
new file mode 100644
index 000000000000..49382377b1dc
--- /dev/null
+++ b/Documentation/admin-guide/media/bttv.rst
@@ -0,0 +1,1761 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+The bttv driver
+===============
+
+Release notes for bttv
+----------------------
+
+You'll need at least these config options for bttv::
+
+    ./scripts/config -e PCI
+    ./scripts/config -m I2C
+    ./scripts/config -m INPUT
+    ./scripts/config -m MEDIA_SUPPORT
+    ./scripts/config -e MEDIA_PCI_SUPPORT
+    ./scripts/config -e MEDIA_ANALOG_TV_SUPPORT
+    ./scripts/config -e MEDIA_DIGITAL_TV_SUPPORT
+    ./scripts/config -e MEDIA_RADIO_SUPPORT
+    ./scripts/config -e RC_CORE
+    ./scripts/config -m VIDEO_BT848
+
+If your board has digital TV, you'll also need::
+
+    ./scripts/config -m DVB_BT8XX
+
+In this case, please see :doc:`bt8xx` for additional notes.
+
+Make bttv work with your card
+-----------------------------
+
+If you have bttv compiled and installed, just booting the Kernel
+should be enough for it to try probing it. However, depending
+on the model, the Kernel may require additional information about
+the hardware, as the device may not be able to provide such info
+directly to the Kernel.
+
+If it doesn't bttv likely could not autodetect your card and needs some
+insmod options.  The most important insmod option for bttv is "card=n"
+to select the correct card type.  If you get video but no sound you've
+very likely specified the wrong (or no) card type.  A list of supported
+cards is in :doc:`bttv-cardlist`.
+
+If bttv takes very long to load (happens sometimes with the cheap
+cards which have no tuner), try adding this to your modules configuration
+file (usually, it is either ``/etc/modules.conf`` or some file at
+``/etc/modules-load.d/``, but the actual place depends on your
+distribution)::
+
+	options i2c-algo-bit bit_test=1
+
+Some cards may require an extra firmware file to work. For example,
+for the WinTV/PVR you need one firmware file from its driver CD,
+called: ``hcwamc.rbf``. It is inside a self-extracting zip file
+called ``pvr45xxx.exe``.  Just placing it at the ``/etc/firmware``
+directory should be enough for it to be autoload during the driver's
+probing mode (e. g. when the Kernel boots or when the driver is
+manually loaded via ``modprobe`` command).
+
+If your card isn't listed in :doc:`bttv-cardlist` or if you have
+trouble making audio work, please read :ref:`still_doesnt_work`.
+
+
+Autodetecting cards
+-------------------
+
+bttv uses the PCI Subsystem ID to autodetect the card type.  lspci lists
+the Subsystem ID in the second line, looks like this:
+
+.. code-block:: none
+
+	00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
+		Subsystem: Hauppauge computer works Inc. WinTV/GO
+		Flags: bus master, medium devsel, latency 32, IRQ 5
+		Memory at e2000000 (32-bit, prefetchable) [size=4K]
+
+only bt878-based cards can have a subsystem ID (which does not mean
+that every card really has one).  bt848 cards can't have a Subsystem
+ID and therefore can't be autodetected.  There is a list with the ID's
+at :doc:`bttv-cardlist` (in case you are intrested or want to mail
+patches with updates).
+
+
+.. _still_doesnt_work:
+
+Still doesn't work?
+-------------------
+
+I do NOT have a lab with 30+ different grabber boards and a
+PAL/NTSC/SECAM test signal generator at home, so I often can't
+reproduce your problems.  This makes debugging very difficult for me.
+
+If you have some knowledge and spare time, please try to fix this
+yourself (patches very welcome of course...)  You know: The linux
+slogan is "Do it yourself".
+
+There is a mailing list at
+http://vger.kernel.org/vger-lists.html#linux-media
+
+If you have trouble with some specific TV card, try to ask there
+instead of mailing me directly.  The chance that someone with the
+same card listens there is much higher...
+
+For problems with sound:  There are a lot of different systems used
+for TV sound all over the world.  And there are also different chips
+which decode the audio signal.  Reports about sound problems ("stereo
+doesn't work") are pretty useless unless you include some details
+about your hardware and the TV sound scheme used in your country (or
+at least the country you are living in).
+
+Modprobe options
+----------------
+
+.. note::
+
+
+   The following argument list can be outdated, as we might add more
+   options if ever needed. In case of doubt, please check with
+   ``modinfo <module>``.
+
+   This command prints various information about a kernel
+   module, among them a complete and up-to-date list of insmod options.
+
+
+
+bttv
+	The bt848/878 (grabber chip) driver
+
+    insmod args::
+
+	    card=n		card type, see CARDLIST for a list.
+	    tuner=n		tuner type, see CARDLIST for a list.
+	    radio=0/1	card supports radio
+	    pll=0/1/2	pll settings
+
+			    0: don't use PLL
+			    1: 28 MHz crystal installed
+			    2: 35 MHz crystal installed
+
+	    triton1=0/1     for Triton1 (+others) compatibility
+	    vsfx=0/1	yet another chipset bug compatibility bit
+			    see README.quirks for details on these two.
+
+	    bigendian=n	Set the endianness of the gfx framebuffer.
+			    Default is native endian.
+	    fieldnr=0/1	Count fields.  Some TV descrambling software
+			    needs this, for others it only generates
+			    50 useless IRQs/sec.  default is 0 (off).
+	    autoload=0/1	autoload helper modules (tuner, audio).
+			    default is 1 (on).
+	    bttv_verbose=0/1/2  verbose level (at insmod time, while
+			    looking at the hardware).  default is 1.
+	    bttv_debug=0/1	debug messages (for capture).
+			    default is 0 (off).
+	    irq_debug=0/1	irq handler debug messages.
+			    default is 0 (off).
+	    gbuffers=2-32	number of capture buffers for mmap'ed capture.
+			    default is 4.
+	    gbufsize=	size of capture buffers. default and
+			    maximum value is 0x208000 (~2MB)
+	    no_overlay=0	Enable overlay on broken hardware.  There
+			    are some chipsets (SIS for example) which
+			    are known to have problems with the PCI DMA
+			    push used by bttv.  bttv will disable overlay
+			    by default on this hardware to avoid crashes.
+			    With this insmod option you can override this.
+	    no_overlay=1	Disable overlay. It should be used by broken
+			    hardware that doesn't support PCI2PCI direct
+			    transfers.
+	    automute=0/1	Automatically mutes the sound if there is
+			    no TV signal, on by default.  You might try
+			    to disable this if you have bad input signal
+			    quality which leading to unwanted sound
+			    dropouts.
+	    chroma_agc=0/1	AGC of chroma signal, off by default.
+	    adc_crush=0/1	Luminance ADC crush, on by default.
+	    i2c_udelay=     Allow reduce I2C speed. Default is 5 usecs
+			    (meaning 66,67 Kbps). The default is the
+			    maximum supported speed by kernel bitbang
+			    algorithm. You may use lower numbers, if I2C
+			    messages are lost (16 is known to work on
+			    all supported cards).
+
+	    bttv_gpio=0/1
+	    gpiomask=
+	    audioall=
+	    audiomux=
+			    See Sound-FAQ for a detailed description.
+
+	remap, card, radio and pll accept up to four comma-separated arguments
+	(for multiple boards).
+
+tuner
+	The tuner driver.  You need this unless you want to use only
+	with a camera or the board doesn't provide analog TV tuning.
+
+	insmod args::
+
+		debug=1		print some debug info to the syslog
+		type=n		type of the tuner chip. n as follows:
+				see CARDLIST for a complete list.
+		pal=[bdgil]	select PAL variant (used for some tuners
+				only, important for the audio carrier).
+
+tvaudio
+	Provide a single driver for all simple i2c audio control
+	chips (tda/tea*).
+
+	insmod args::
+
+		tda8425  = 1	enable/disable the support for the
+		tda9840  = 1	various chips.
+		tda9850  = 1	The tea6300 can't be autodetected and is
+		tda9855  = 1	therefore off by default, if you have
+		tda9873  = 1	this one on your card (STB uses these)
+		tda9874a = 1	you have to enable it explicitly.
+		tea6300  = 0	The two tda985x chips use the same i2c
+		tea6420  = 1	address and can't be disturgished from
+		pic16c54 = 1	each other, you might have to disable
+				the wrong one.
+		debug = 1	print debug messages
+
+msp3400
+	The driver for the msp34xx sound processor chips. If you have a
+	stereo card, you probably want to insmod this one.
+
+	insmod args::
+
+		debug=1/2	print some debug info to the syslog,
+				2 is more verbose.
+		simple=1	Use the "short programming" method.  Newer
+				msp34xx versions support this.  You need this
+				for dbx stereo.  Default is on if supported by
+				the chip.
+		once=1		Don't check the TV-stations Audio mode
+				every few seconds, but only once after
+				channel switches.
+		amsound=1	Audio carrier is AM/NICAM at 6.5 Mhz.  This
+				should improve things for french people, the
+				carrier autoscan seems to work with FM only...
+
+If the box freezes hard with bttv
+---------------------------------
+
+It might be a bttv driver bug.  It also might be bad hardware.  It also
+might be something else ...
+
+Just mailing me "bttv freezes" isn't going to help much.  This README
+has a few hints how you can help to pin down the problem.
+
+
+bttv bugs
+~~~~~~~~~
+
+If some version works and another doesn't it is likely to be a driver
+bug.  It is very helpful if you can tell where exactly it broke
+(i.e. the last working and the first broken version).
+
+With a hard freeze you probably doesn't find anything in the logfiles.
+The only way to capture any kernel messages is to hook up a serial
+console and let some terminal application log the messages.  /me uses
+screen.  See :doc:`/admin-guide/serial-console` for details on setting
+up a serial console.
+
+Read :doc:`/admin-guide/bug-hunting` to learn how to get any useful
+information out of a register+stack dump printed by the kernel on
+protection faults (so-called "kernel oops").
+
+If you run into some kind of deadlock, you can try to dump a call trace
+for each process using sysrq-t (see :doc:`/admin-guide/sysrq`).
+This way it is possible to figure where *exactly* some process in "D"
+state is stuck.
+
+I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid
+for some people.  Thus probably a small buglet left somewhere in bttv
+0.7.x.  I have no idea where exactly, it works stable for me and a lot of
+other people.  But in case you have problems with the 0.7.x versions you
+can give 0.8.x a try ...
+
+
+hardware bugs
+~~~~~~~~~~~~~
+
+Some hardware can't deal with PCI-PCI transfers (i.e. grabber => vga).
+Sometimes problems show up with bttv just because of the high load on
+the PCI bus. The bt848/878 chips have a few workarounds for known
+incompatibilities, see README.quirks.
+
+Some folks report that increasing the pci latency helps too,
+althrought I'm not sure whenever this really fixes the problems or
+only makes it less likely to happen.  Both bttv and btaudio have a
+insmod option to set the PCI latency of the device.
+
+Some mainboard have problems to deal correctly with multiple devices
+doing DMA at the same time.  bttv + ide seems to cause this sometimes,
+if this is the case you likely see freezes only with video and hard disk
+access at the same time.  Updating the IDE driver to get the latest and
+greatest workarounds for hardware bugs might fix these problems.
+
+
+other
+~~~~~
+
+If you use some binary-only yunk (like nvidia module) try to reproduce
+the problem without.
+
+IRQ sharing is known to cause problems in some cases.  It works just
+fine in theory and many configurations.  Neverless it might be worth a
+try to shuffle around the PCI cards to give bttv another IRQ or make
+it share the IRQ with some other piece of hardware.  IRQ sharing with
+VGA cards seems to cause trouble sometimes.  I've also seen funny
+effects with bttv sharing the IRQ with the ACPI bridge (and
+apci-enabled kernel).
+
+Bttv quirks
+-----------
+
+Below is what the bt878 data book says about the PCI bug compatibility
+modes of the bt878 chip.
+
+The triton1 insmod option sets the EN_TBFX bit in the control register.
+The vsfx insmod option does the same for EN_VSFX bit.  If you have
+stability problems you can try if one of these options makes your box
+work solid.
+
+drivers/pci/quirks.c knows about these issues, this way these bits are
+enabled automagically for known-buggy chipsets (look at the kernel
+messages, bttv tells you).
+
+Normal PCI Mode
+~~~~~~~~~~~~~~~
+
+The PCI REQ signal is the logical-or of the incoming function requests.
+The inter-nal GNT[0:1] signals are gated asynchronously with GNT and
+demultiplexed by the audio request signal. Thus the arbiter defaults to
+the video function at power-up and parks there during no requests for
+bus access. This is desirable since the video will request the bus more
+often. However, the audio will have highest bus access priority. Thus
+the audio will have first access to the bus even when issuing a request
+after the video request but before the PCI external arbiter has granted
+access to the Bt879. Neither function can preempt the other once on the
+bus. The duration to empty the entire video PCI FIFO onto the PCI bus is
+very short compared to the bus access latency the audio PCI FIFO can
+tolerate.
+
+
+430FX Compatibility Mode
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+When using the 430FX PCI, the following rules will ensure
+compatibility:
+
+ (1) Deassert REQ at the same time as asserting FRAME.
+ (2) Do not reassert REQ to request another bus transaction until after
+     finish-ing the previous transaction.
+
+Since the individual bus masters do not have direct control of REQ, a
+simple logical-or of video and audio requests would violate the rules.
+Thus, both the arbiter and the initiator contain 430FX compatibility
+mode logic. To enable 430FX mode, set the EN_TBFX bit as indicated in
+Device Control Register on page 104.
+
+When EN_TBFX is enabled, the arbiter ensures that the two compatibility
+rules are satisfied. Before GNT is asserted by the PCI arbiter, this
+internal arbiter may still logical-or the two requests. However, once
+the GNT is issued, this arbiter must lock in its decision and now route
+only the granted request to the REQ pin. The arbiter decision lock
+happens regardless of the state of FRAME because it does not know when
+FRAME will be asserted (typically - each initiator will assert FRAME on
+the cycle following GNT). When FRAME is asserted, it is the initiator s
+responsibility to remove its request at the same time. It is the
+arbiters responsibility to allow this request to flow through to REQ and
+not allow the other request to hold REQ asserted. The decision lock may
+be removed at the end of the transaction: for example, when the bus is
+idle (FRAME and IRDY). The arbiter decision may then continue
+asynchronously until GNT is again asserted.
+
+
+Interfacing with Non-PCI 2.1 Compliant Core Logic
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A small percentage of core logic devices may start a bus transaction
+during the same cycle that GNT is de-asserted. This is non PCI 2.1
+compliant. To ensure compatibility when using PCs with these PCI
+controllers, the EN_VSFX bit must be enabled (refer to Device Control
+Register on page 104). When in this mode, the arbiter does not pass GNT
+to the internal functions unless REQ is asserted. This prevents a bus
+transaction from starting the same cycle as GNT is de-asserted. This
+also has the side effect of not being able to take advantage of bus
+parking, thus lowering arbitration performance. The Bt879 drivers must
+query for these non-compliant devices, and set the EN_VSFX bit only if
+required.
+
+
+Other elements of the tvcards array
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you are trying to make a new card work you might find it useful to
+know what the other elements in the tvcards array are good for::
+
+	video_inputs    - # of video inputs the card has
+	audio_inputs    - historical cruft, not used any more.
+	tuner           - which input is the tuner
+	svhs            - which input is svhs (all others are labeled composite)
+	muxsel          - video mux, input->registervalue mapping
+	pll             - same as pll= insmod option
+	tuner_type      - same as tuner= insmod option
+	*_modulename    - hint whenever some card needs this or that audio
+			module loaded to work properly.
+	has_radio	- whenever this TV card has a radio tuner.
+	no_msp34xx	- "1" disables loading of msp3400.o module
+	no_tda9875	- "1" disables loading of tda9875.o module
+	needs_tvaudio	- set to "1" to load tvaudio.o module
+
+If some config item is specified both from the tvcards array and as
+insmod option, the insmod option takes precedence.
+
+Cards
+-----
+
+.. note::
+
+   For a more updated list, please check
+   https://linuxtv.org/wiki/index.php/Hardware_Device_Information
+
+Supported cards: Bt848/Bt848a/Bt849/Bt878/Bt879 cards
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+All cards with Bt848/Bt848a/Bt849/Bt878/Bt879 and normal
+Composite/S-VHS inputs are supported.  Teletext and Intercast support
+(PAL only) for ALL cards via VBI sample decoding in software.
+
+Some cards with additional multiplexing of inputs or other additional
+fancy chips are only partially supported (unless specifications by the
+card manufacturer are given).  When a card is listed here it isn't
+necessarily fully supported.
+
+All other cards only differ by additional components as tuners, sound
+decoders, EEPROMs, teletext decoders ...
+
+
+MATRIX Vision
+~~~~~~~~~~~~~
+
+MV-Delta
+- Bt848A
+- 4 Composite inputs, 1 S-VHS input (shared with 4th composite)
+- EEPROM
+
+http://www.matrix-vision.de/
+
+This card has no tuner but supports all 4 composite (1 shared with an
+S-VHS input) of the Bt848A.
+Very nice card if you only have satellite TV but several tuners connected
+to the card via composite.
+
+Many thanks to Matrix-Vision for giving us 2 cards for free which made
+Bt848a/Bt849 single crystal operation support possible!!!
+
+
+
+Miro/Pinnacle PCTV
+~~~~~~~~~~~~~~~~~~
+
+- Bt848
+  some (all??) come with 2 crystals for PAL/SECAM and NTSC
+- PAL, SECAM or NTSC TV tuner (Philips or TEMIC)
+- MSP34xx sound decoder on add on board
+  decoder is supported but AFAIK does not yet work
+  (other sound MUX setting in GPIO port needed??? somebody who fixed this???)
+- 1 tuner, 1 composite and 1 S-VHS input
+- tuner type is autodetected
+
+http://www.miro.de/
+http://www.miro.com/
+
+
+Many thanks for the free card which made first NTSC support possible back
+in 1997!
+
+
+Hauppauge Win/TV pci
+~~~~~~~~~~~~~~~~~~~~
+
+There are many different versions of the Hauppauge cards with different
+tuners (TV+Radio ...), teletext decoders.
+Note that even cards with same model numbers have (depending on the revision)
+different chips on it.
+
+- Bt848 (and others but always in 2 crystal operation???)
+  newer cards have a Bt878
+
+- PAL, SECAM, NTSC or tuner with or without Radio support
+
+e.g.:
+
+- PAL:
+
+  - TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
+  - TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
+
+- NTSC:
+
+  - TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
+  - TSA5518: no datasheet available on Philips site
+
+- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip
+  with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM)
+  SAA5246 (I2C 0x22) is supported
+
+- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y
+  with configuration information
+  I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf)
+
+- 1 tuner, 1 composite and (depending on model) 1 S-VHS input
+
+- 14052B: mux for selection of sound source
+
+- sound decoder: TDA9800, MSP34xx (stereo cards)
+
+
+Askey CPH-Series
+~~~~~~~~~~~~~~~~
+Developed by TelSignal(?), OEMed by many vendors (Typhoon, Anubis, Dynalink)
+
+- Card series:
+  - CPH01x: BT848 capture only
+  - CPH03x: BT848
+  - CPH05x: BT878 with FM
+  - CPH06x: BT878 (w/o FM)
+  - CPH07x: BT878 capture only
+
+- TV standards:
+  - CPH0x0: NTSC-M/M
+  - CPH0x1: PAL-B/G
+  - CPH0x2: PAL-I/I
+  - CPH0x3: PAL-D/K
+  - CPH0x4: SECAM-L/L
+  - CPH0x5: SECAM-B/G
+  - CPH0x6: SECAM-D/K
+  - CPH0x7: PAL-N/N
+  - CPH0x8: PAL-B/H
+  - CPH0x9: PAL-M/M
+
+- CPH03x was often sold as "TV capturer".
+
+Identifying:
+
+  #) 878 cards can be identified by PCI Subsystem-ID:
+     - 144f:3000 = CPH06x
+     - 144F:3002 = CPH05x w/ FM
+     - 144F:3005 = CPH06x_LC (w/o remote control)
+  #) The cards have a sticker with "CPH"-model on the back.
+  #) These cards have a number printed on the PCB just above the tuner metal box:
+     - "80-CP2000300-x" = CPH03X
+     - "80-CP2000500-x" = CPH05X
+     - "80-CP2000600-x" = CPH06X / CPH06x_LC
+
+  Askey sells these cards as "Magic TView series", Brand "MagicXpress".
+  Other OEM often call these "Tview", "TView99" or else.
+
+Lifeview Flyvideo Series:
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The naming of these series differs in time and space.
+
+Identifying:
+  #) Some models can be identified by PCI subsystem ID:
+
+     - 1852:1852 = Flyvideo 98 FM
+     - 1851:1850 = Flyvideo 98
+     - 1851:1851 = Flyvideo 98 EZ (capture only)
+
+  #) There is a print on the PCB:
+
+     - LR25       = Flyvideo (Zoran ZR36120, SAA7110A)
+     - LR26 Rev.N = Flyvideo II (Bt848)
+     - LR26 Rev.O = Flyvideo II (Bt878)
+     - LR37 Rev.C = Flyvideo EZ (Capture only, ZR36120 + SAA7110)
+     - LR38 Rev.A1= Flyvideo II EZ (Bt848 capture only)
+     - LR50 Rev.Q = Flyvideo 98 (w/eeprom and PCI subsystem ID)
+     - LR50 Rev.W = Flyvideo 98 (no eeprom)
+     - LR51 Rev.E = Flyvideo 98 EZ (capture only)
+     - LR90       = Flyvideo 2000 (Bt878)
+     - LR90 Flyvideo 2000S (Bt878) w/Stereo TV (Package incl. LR91 daughterboard)
+     - LR91       = Stereo daughter card for LR90
+     - LR97       = Flyvideo DVBS
+     - LR99 Rev.E = Low profile card for OEM integration (only internal audio!) bt878
+     - LR136	 = Flyvideo 2100/3100 (Low profile, SAA7130/SAA7134)
+     - LR137      = Flyvideo DV2000/DV3000 (SAA7130/SAA7134 + IEEE1394)
+     - LR138 Rev.C= Flyvideo 2000 (SAA7130)
+     - LR138 Flyvideo 3000 (SAA7134) w/Stereo TV
+
+	- These exist in variations w/FM and w/Remote sometimes denoted
+	  by suffixes "FM" and "R".
+
+  #) You have a laptop (miniPCI card):
+
+      - Product    = FlyTV Platinum Mini
+      - Model/Chip = LR212/saa7135
+
+      - Lifeview.com.tw states (Feb. 2002):
+        "The FlyVideo2000 and FlyVideo2000s product name have renamed to FlyVideo98."
+        Their Bt8x8 cards are listed as discontinued.
+      - Flyvideo 2000S was probably sold as Flyvideo 3000 in some countries(Europe?).
+        The new Flyvideo 2000/3000 are SAA7130/SAA7134 based.
+
+"Flyvideo II" had been the name for the 848 cards, nowadays (in Germany)
+this name is re-used for LR50 Rev.W.
+
+The Lifeview website mentioned Flyvideo III at some time, but such a card
+has not yet been seen (perhaps it was the german name for LR90 [stereo]).
+These cards are sold by many OEMs too.
+
+FlyVideo A2 (Elta 8680)= LR90 Rev.F (w/Remote, w/o FM, stereo TV by tda9821) {Germany}
+
+Lifeview 3000 (Elta 8681) as sold by Plus(April 2002), Germany = LR138 w/ saa7134
+
+lifeview config coding on gpio pins 0-9
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+- LR50 rev. Q ("PARTS: 7031505116), Tuner wurde als Nr. 5 erkannt, Eingänge
+  SVideo, TV, Composite, Audio, Remote:
+
+ - CP9..1=100001001 (1: 0-Ohm-Widerstand gegen GND unbestückt; 0: bestückt)
+
+
+Typhoon TV card series:
+~~~~~~~~~~~~~~~~~~~~~~~
+
+These can be CPH, Flyvideo, Pixelview or KNC1 series.
+
+Typhoon is the brand of Anubis.
+
+Model 50680 got re-used, some model no. had different contents over time.
+
+Models:
+
+  - 50680 "TV Tuner PCI Pal BG"(old,red package)=can be CPH03x(bt848) or CPH06x(bt878)
+  - 50680 "TV Tuner Pal BG" (blue package)= Pixelview PV-BT878P+ (Rev 9B)
+  - 50681 "TV Tuner PCI Pal I" (variant of 50680)
+  - 50682 "TView TV/FM Tuner Pal BG"       = Flyvideo 98FM (LR50 Rev.Q)
+
+  .. note::
+
+	 The package has a picture of CPH05x (which would be a real TView)
+
+  - 50683 "TV Tuner PCI SECAM" (variant of 50680)
+  - 50684 "TV Tuner Pal BG"                = Pixelview 878TV(Rev.3D)
+  - 50686 "TV Tuner"                       = KNC1 TV Station
+  - 50687 "TV Tuner stereo"                = KNC1 TV Station pro
+  - 50688 "TV Tuner RDS" (black package)   = KNC1 TV Station RDS
+  - 50689  TV SAT DVB-S CARD CI PCI (SAA7146AH, SU1278?) = "KNC1 TV Station DVB-S"
+  - 50692 "TV/FM Tuner" (small PCB)
+  - 50694  TV TUNER CARD RDS (PHILIPS CHIPSET SAA7134HL)
+  - 50696  TV TUNER STEREO (PHILIPS CHIPSET SAA7134HL, MK3ME Tuner)
+  - 50804  PC-SAT TV/Audio Karte = Techni-PC-Sat (ZORAN 36120PQC, Tuner:Alps)
+  - 50866  TVIEW SAT RECEIVER+ADR
+  - 50868 "TV/FM Tuner Pal I" (variant of 50682)
+  - 50999 "TV/FM Tuner Secam" (variant of 50682)
+
+Guillemot
+~~~~~~~~~
+
+Models:
+
+- Maxi-TV PCI (ZR36120)
+- Maxi TV Video 2 = LR50 Rev.Q (FI1216MF, PAL BG+SECAM)
+- Maxi TV Video 3 = CPH064 (PAL BG + SECAM)
+
+Mentor
+~~~~~~
+
+Mentor TV card ("55-878TV-U1") = Pixelview 878TV(Rev.3F) (w/FM w/Remote)
+
+Prolink
+~~~~~~~
+
+- TV cards:
+
+  - PixelView Play TV pro - (Model: PV-BT878P+ REV 8E)
+  - PixelView Play TV pro - (Model: PV-BT878P+ REV 9D)
+  - PixelView Play TV pro - (Model: PV-BT878P+ REV 4C / 8D / 10A )
+  - PixelView Play TV - (Model: PV-BT848P+)
+  - 878TV - (Model: PV-BT878TV)
+
+- Multimedia TV packages (card + software pack):
+
+  - PixelView Play TV Theater - (Model: PV-M4200) =  PixelView Play TV pro + Software
+  - PixelView Play TV PAK -     (Model: PV-BT878P+ REV 4E)
+  - PixelView Play TV/VCR -     (Model: PV-M3200 REV 4C / 8D / 10A )
+  - PixelView Studio PAK -      (Model:    M2200 REV 4C / 8D / 10A )
+  - PixelView PowerStudio PAK - (Model: PV-M3600 REV 4E)
+  - PixelView DigitalVCR PAK -  (Model: PV-M2400 REV 4C / 8D / 10A )
+  - PixelView PlayTV PAK II (TV/FM card + usb camera)  PV-M3800
+  - PixelView PlayTV XP PV-M4700,PV-M4700(w/FM)
+  - PixelView PlayTV DVR PV-M4600  package contents:PixelView PlayTV pro, windvr & videoMail s/w
+
+- Further Cards:
+
+  - PV-BT878P+rev.9B (Play TV Pro, opt. w/FM w/NICAM)
+  - PV-BT878P+rev.2F
+  - PV-BT878P Rev.1D (bt878, capture only)
+
+  - XCapture PV-CX881P (cx23881)
+  - PlayTV HD PV-CX881PL+, PV-CX881PL+(w/FM) (cx23881)
+
+  - DTV3000 PV-DTV3000P+ DVB-S CI = Twinhan VP-1030
+  - DTV2000 DVB-S = Twinhan VP-1020
+
+- Video Conferencing:
+
+  - PixelView Meeting PAK - (Model: PV-BT878P)
+  - PixelView Meeting PAK Lite - (Model: PV-BT878P)
+  - PixelView Meeting PAK plus - (Model: PV-BT878P+rev 4C/8D/10A)
+  - PixelView Capture - (Model: PV-BT848P)
+  - PixelView PlayTV USB pro
+  - Model No. PV-NT1004+, PV-NT1004+ (w/FM) = NT1004 USB decoder chip + SAA7113 video decoder chip
+
+Dynalink
+~~~~~~~~
+
+These are CPH series.
+
+Phoebemicro
+~~~~~~~~~~~
+
+- TV Master    = CPH030 or CPH060
+- TV Master FM = CPH050
+
+Genius/Kye
+~~~~~~~~~~
+
+- Video Wonder/Genius Internet Video Kit = LR37 Rev.C
+- Video Wonder Pro II (848 or 878) = LR26
+
+Tekram
+~~~~~~
+
+- VideoCap C205 (Bt848)
+- VideoCap C210 (zr36120 +Philips)
+- CaptureTV M200 (ISA)
+- CaptureTV M205 (Bt848)
+
+Lucky Star
+~~~~~~~~~~
+
+- Image World Conference TV = LR50 Rev. Q
+
+Leadtek
+~~~~~~~
+
+- WinView 601 (Bt848)
+- WinView 610 (Zoran)
+- WinFast2000
+- WinFast2000 XP
+
+Support for the Leadtek WinView 601 TV/FM
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Author of this section: Jon Tombs <jon@gte.esi.us.es>
+
+This card is basically the same as all the rest (Bt484A, Philips tuner),
+the main difference is that they have attached a programmable attenuator to 3
+GPIO lines in order to give some volume control. They have also stuck an
+infra-red remote control decoded on the board, I will add support for this
+when I get time (it simple generates an interrupt for each key press, with
+the key code is placed in the GPIO port).
+
+I don't yet have any application to test the radio support. The tuner
+frequency setting should work but it is possible that the audio multiplexer
+is wrong. If it doesn't work, send me email.
+
+
+- No Thanks to Leadtek they refused to answer any questions about their
+  hardware. The driver was written by visual inspection of the card. If you
+  use this driver, send an email insult to them, and tell them you won't
+  continue buying their hardware unless they support Linux.
+
+- Little thanks to Princeton Technology Corp (http://www.princeton.com.tw)
+  who make the audio attenuator. Their publicly available data-sheet available
+  on their web site doesn't include the chip programming information! Hidden
+  on their server are the full data-sheets, but don't ask how I found it.
+
+To use the driver I use the following options, the tuner and pll settings might
+be different in your country. You can force it via modprobe parameters.
+For example::
+
+    modprobe bttv  tuner=1 pll=28 radio=1 card=17
+
+Sets tuner type 1 (Philips PAL_I), PLL with a 28 MHz crystal, enables
+FM radio and selects bttv card ID 17 (Leadtek WinView 601).
+
+
+KNC One
+~~~~~~~
+
+- TV-Station
+- TV-Station SE (+Software Bundle)
+- TV-Station pro (+TV stereo)
+- TV-Station FM (+Radio)
+- TV-Station RDS (+RDS)
+- TV Station SAT (analog satellite)
+- TV-Station DVB-S
+
+.. note:: newer Cards have saa7134, but model name stayed the same?
+
+Provideo
+~~~~~~~~
+
+-  PV951 or PV-951, now named PV-951T
+   (also are sold as:
+   Boeder TV-FM Video Capture Card,
+   Titanmedia Supervision TV-2400,
+   Provideo PV951 TF,
+   3DeMon PV951,
+   MediaForte TV-Vision PV951,
+   Yoko PV951,
+   Vivanco Tuner Card PCI Art.-Nr.: 68404
+   )
+
+- Surveillance Series:
+
+ - PV-141
+ - PV-143
+ - PV-147
+ - PV-148 (capture only)
+ - PV-150
+ - PV-151
+
+- TV-FM Tuner Series:
+
+ - PV-951TDV (tv tuner + 1394)
+ - PV-951T/TF
+ - PV-951PT/TF
+ - PV-956T/TF Low Profile
+ - PV-911
+
+Highscreen
+~~~~~~~~~~
+
+Models:
+
+- TV Karte = LR50 Rev.S
+- TV-Boostar = Terratec Terra TV+ Version 1.0 (Bt848, tda9821) "ceb105.pcb"
+
+Zoltrix
+~~~~~~~
+
+Models:
+
+- Face to Face Capture (Bt848 capture only) (PCB "VP-2848")
+- Face To Face TV MAX (Bt848) (PCB "VP-8482 Rev1.3")
+- Genie TV (Bt878) (PCB "VP-8790 Rev 2.1")
+- Genie Wonder Pro
+
+AVerMedia
+~~~~~~~~~
+
+- AVer FunTV Lite (ISA, AV3001 chipset)  "M101.C"
+- AVerTV
+- AVerTV Stereo
+- AVerTV Studio (w/FM)
+- AVerMedia TV98 with Remote
+- AVerMedia TV/FM98 Stereo
+- AVerMedia TVCAM98
+- TVCapture (Bt848)
+- TVPhone (Bt848)
+- TVCapture98 (="AVerMedia TV98" in USA) (Bt878)
+- TVPhone98 (Bt878, w/FM)
+
+======== =========== =============== ======= ====== ======== =======================
+PCB      PCI-ID      Model-Name      Eeprom  Tuner  Sound    Country
+======== =========== =============== ======= ====== ======== =======================
+M101.C   ISA !
+M108-B      Bt848                     --     FR1236		 US   [#f2]_, [#f3]_
+M1A8-A      Bt848    AVer TV-Phone           FM1216  --
+M168-T   1461:0003   AVerTV Studio   48:17   FM1216 TDA9840T  D    [#f1]_ w/FM w/Remote
+M168-U   1461:0004   TVCapture98     40:11   FI1216   --      D    w/Remote
+M168II-B 1461:0003   Medion MD9592   48:16   FM1216 TDA9873H  D    w/FM
+======== =========== =============== ======= ====== ======== =======================
+
+.. [#f1] Daughterboard MB68-A with TDA9820T and TDA9840T
+.. [#f2] Sony NE41S soldered (stereo sound?)
+.. [#f3] Daughterboard M118-A w/ pic 16c54 and 4 MHz quartz
+
+- US site has different drivers for (as of 09/2002):
+
+  - EZ Capture/InterCam PCI (BT-848 chip)
+  - EZ Capture/InterCam PCI (BT-878 chip)
+  - TV-Phone (BT-848 chip)
+  - TV98 (BT-848 chip)
+  - TV98 With Remote (BT-848 chip)
+  - TV98 (BT-878 chip)
+  - TV98 With Remote (BT-878)
+  - TV/FM98 (BT-878 chip)
+  - AVerTV
+  - AverTV Stereo
+  - AVerTV Studio
+
+DE hat diverse Treiber fuer diese Modelle (Stand 09/2002):
+
+  - TVPhone (848) mit Philips tuner FR12X6 (w/ FM radio)
+  - TVPhone (848) mit Philips tuner FM12X6 (w/ FM radio)
+  - TVCapture (848) w/Philips tuner FI12X6
+  - TVCapture (848) non-Philips tuner
+  - TVCapture98 (Bt878)
+  - TVPhone98 (Bt878)
+  - AVerTV und TVCapture98 w/VCR (Bt 878)
+  - AVerTVStudio und TVPhone98 w/VCR (Bt878)
+  - AVerTV GO Serie (Kein SVideo Input)
+  - AVerTV98 (BT-878 chip)
+  - AVerTV98 mit Fernbedienung (BT-878 chip)
+  - AVerTV/FM98 (BT-878 chip)
+
+  - VDOmate (www.averm.com.cn) = M168U ?
+
+Aimslab
+~~~~~~~
+
+Models:
+
+- Video Highway or "Video Highway TR200" (ISA)
+- Video Highway Xtreme (aka "VHX") (Bt848, FM w/ TEA5757)
+
+IXMicro (former: IMS=Integrated Micro Solutions)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- IXTV BT848 (=TurboTV)
+- IXTV BT878
+- IMS TurboTV (Bt848)
+
+Lifetec/Medion/Tevion/Aldi
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- LT9306/MD9306 = CPH061
+- LT9415/MD9415 = LR90 Rev.F or Rev.G
+- MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H)
+- MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner)
+- MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner)
+
+Modular Technologies (www.modulartech.com) UK
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- MM100 PCTV (Bt848)
+- MM201 PCTV (Bt878, Bt832) w/ Quartzsight camera
+- MM202 PCTV (Bt878, Bt832, tda9874)
+- MM205 PCTV (Bt878)
+- MM210 PCTV (Bt878) (Galaxy TV, Galaxymedia ?)
+
+Terratec
+~~~~~~~~
+
+Models:
+
+- Terra TV+ Version 1.0 (Bt848), "ceb105.PCB" printed on the PCB, TDA9821
+- Terra TV+ Version 1.1 (Bt878), "LR74 Rev.E" printed on the PCB, TDA9821
+- Terra TValueRadio,             "LR102 Rev.C" printed on the PCB
+- Terra TV/Radio+ Version 1.0,   "80-CP2830100-0" TTTV3 printed on the PCB,
+  "CPH010-E83" on the back, SAA6588T, TDA9873H
+- Terra TValue Version BT878,    "80-CP2830110-0 TTTV4" printed on the PCB,
+  "CPH011-D83" on back
+- Terra TValue Version 1.0       "ceb105.PCB" (really identical to Terra TV+ Version 1.0)
+- Terra TValue New Revision	  "LR102 Rec.C"
+- Terra Active Radio Upgrade (tea5757h, saa6588t)
+
+- LR74 is a newer PCB revision of ceb105 (both incl. connector for Active Radio Upgrade)
+
+- Cinergy 400 (saa7134), "E877 11(S)", "PM820092D" printed on PCB
+- Cinergy 600 (saa7134)
+
+Technisat
+~~~~~~~~~
+
+Models:
+
+- Discos ADR PC-Karte ISA (no TV!)
+- Discos ADR PC-Karte PCI (probably no TV?)
+- Techni-PC-Sat (Sat. analog)
+  Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A)
+- Mediafocus I (zr36120/zr36125, drp3510, Sat. analog + ADR Radio)
+- Mediafocus II (saa7146, Sat. analog)
+- SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A)
+- SkyStar 1 DVB  (AV7110) = Technotrend Premium
+- SkyStar 2 DVB  (B2C2) (=Sky2PC)
+
+Siemens
+~~~~~~~
+
+Multimedia eXtension Board (MXB) (SAA7146, SAA7111)
+
+Powercolor
+~~~~~~~~~~
+
+Models:
+
+- MTV878
+       Package comes with different contents:
+
+           a) pcb "MTV878" (CARD=75)
+           b) Pixelview Rev. 4\_
+
+- MTV878R w/Remote Control
+- MTV878F w/Remote Control w/FM radio
+
+Pinnacle
+~~~~~~~~
+
+PCTV models:
+
+- Mirovideo PCTV (Bt848)
+- Mirovideo PCTV SE (Bt848)
+- Mirovideo PCTV Pro (Bt848 + Daughterboard for TV Stereo and FM)
+- Studio PCTV Rave (Bt848 Version = Mirovideo PCTV)
+- Studio PCTV Rave (Bt878 package w/o infrared)
+- Studio PCTV      (Bt878)
+- Studio PCTV Pro  (Bt878 stereo w/ FM)
+- Pinnacle PCTV    (Bt878, MT2032)
+- Pinnacle PCTV Pro (Bt878, MT2032)
+- Pinncale PCTV Sat (bt878a, HM1821/1221) ["Conexant CX24110 with CX24108 tuner, aka HM1221/HM1811"]
+- Pinnacle PCTV Sat XE
+
+M(J)PEG capture and playback models:
+
+- DC1+ (ISA)
+- DC10  (zr36057,     zr36060,      saa7110, adv7176)
+- DC10+ (zr36067,     zr36060,      saa7110, adv7176)
+- DC20  (ql16x24b,zr36050, zr36016, saa7110, saa7187 ...)
+- DC30  (zr36057, zr36050, zr36016, vpx3220, adv7176, ad1843, tea6415, miro FST97A1)
+- DC30+ (zr36067, zr36050, zr36016, vpx3220, adv7176)
+- DC50  (zr36067, zr36050, zr36016, saa7112, adv7176 (2 pcs.?), ad1843, miro FST97A1, Lattice ???)
+
+Lenco
+~~~~~
+
+Models:
+
+- MXR-9565 (=Technisat Mediafocus?)
+- MXR-9571 (Bt848) (=CPH031?)
+- MXR-9575
+- MXR-9577 (Bt878) (=Prolink 878TV Rev.3x)
+- MXTV-9578CP (Bt878) (= Prolink PV-BT878P+4E)
+
+Iomega
+~~~~~~
+
+Buz (zr36067, zr36060, saa7111, saa7185)
+
+LML
+~~~
+   LML33 (zr36067, zr36060, bt819, bt856)
+
+Grandtec
+~~~~~~~~
+
+Models:
+
+- Grand Video Capture (Bt848)
+- Multi Capture Card  (Bt878)
+
+Koutech
+~~~~~~~
+
+Models:
+
+- KW-606 (Bt848)
+- KW-607 (Bt848 capture only)
+- KW-606RSF
+- KW-607A (capture only)
+- KW-608 (Zoran capture only)
+
+IODATA (jp)
+~~~~~~~~~~~
+
+Models:
+
+- GV-BCTV/PCI
+- GV-BCTV2/PCI
+- GV-BCTV3/PCI
+- GV-BCTV4/PCI
+- GV-VCP/PCI (capture only)
+- GV-VCP2/PCI (capture only)
+
+Canopus (jp)
+~~~~~~~~~~~~
+
+WinDVR	= Kworld "KW-TVL878RF"
+
+www.sigmacom.co.kr
+~~~~~~~~~~~~~~~~~~
+
+Sigma Cyber TV II
+
+www.sasem.co.kr
+~~~~~~~~~~~~~~~
+
+Litte OnAir TV
+
+hama
+~~~~
+
+TV/Radio-Tuner Card, PCI (Model 44677) = CPH051
+
+Sigma Designs
+~~~~~~~~~~~~~
+
+Hollywood plus (em8300, em9010, adv7175), (PCB "M340-10") MPEG DVD decoder
+
+Formac
+~~~~~~
+
+Models:
+
+- iProTV (Card for iMac Mezzanine slot, Bt848+SCSI)
+- ProTV (Bt848)
+- ProTV II = ProTV Stereo (Bt878) ["stereo" means FM stereo, tv is still mono]
+
+ATI
+~~~
+
+Models:
+
+- TV-Wonder
+- TV-Wonder VE
+
+Diamond Multimedia
+~~~~~~~~~~~~~~~~~~
+
+DTV2000 (Bt848, tda9875)
+
+Aopen
+~~~~~
+
+- VA1000 Plus (w/ Stereo)
+- VA1000 Lite
+- VA1000 (=LR90)
+
+Intel
+~~~~~
+
+Models:
+
+- Smart Video Recorder (ISA full-length)
+- Smart Video Recorder pro (ISA half-length)
+- Smart Video Recorder III (Bt848)
+
+STB
+~~~
+
+Models:
+
+- STB Gateway 6000704 (bt878)
+- STB Gateway 6000699 (bt848)
+- STB Gateway 6000402 (bt848)
+- STB TV130 PCI
+
+Videologic
+~~~~~~~~~~
+
+Models:
+
+- Captivator Pro/TV (ISA?)
+- Captivator PCI/VC (Bt848 bundled with camera) (capture only)
+
+Technotrend
+~~~~~~~~~~~~
+
+Models:
+
+- TT-SAT PCI (PCB "Sat-PCI Rev.:1.3.1"; zr36125, vpx3225d, stc0056a, Tuner:BSKE6-155A
+- TT-DVB-Sat
+   - revisions 1.1, 1.3, 1.5, 1.6 and 2.1
+   - This card is sold as OEM from:
+
+	- Siemens DVB-s Card
+	- Hauppauge WinTV DVB-S
+	- Technisat SkyStar 1 DVB
+	- Galaxis DVB Sat
+
+   - Now this card is called TT-PCline Premium Family
+   - TT-Budget (saa7146, bsru6-701a)
+     This card is sold as OEM from:
+
+	- Hauppauge WinTV Nova
+	- Satelco Standard PCI (DVB-S)
+   - TT-DVB-C PCI
+
+Teles
+~~~~~
+
+ DVB-s (Rev. 2.2, BSRV2-301A, data only?)
+
+Remote Vision
+~~~~~~~~~~~~~
+
+MX RV605 (Bt848 capture only)
+
+Boeder
+~~~~~~
+
+Models:
+
+- PC ChatCam (Model 68252) (Bt848 capture only)
+- Tv/Fm Capture Card  (Model 68404) = PV951
+
+Media-Surfer  (esc-kathrein.de)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- Sat-Surfer (ISA)
+- Sat-Surfer PCI = Techni-PC-Sat
+- Cable-Surfer 1
+- Cable-Surfer 2
+- Cable-Surfer PCI (zr36120)
+- Audio-Surfer (ISA Radio card)
+
+Jetway (www.jetway.com.tw)
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- JW-TV 878M
+- JW-TV 878  = KWorld KW-TV878RF
+
+Galaxis
+~~~~~~~
+
+Models:
+
+- Galaxis DVB Card S CI
+- Galaxis DVB Card C CI
+- Galaxis DVB Card S
+- Galaxis DVB Card C
+- Galaxis plug.in S [neuer Name: Galaxis DVB Card S CI
+
+Hauppauge
+~~~~~~~~~
+
+Models:
+
+- many many WinTV models ...
+- WinTV DVBs = Technotrend Premium 1.3
+- WinTV NOVA = Technotrend Budget 1.1 "S-DVB DATA"
+- WinTV NOVA-CI "SDVBACI"
+- WinTV Nova USB (=Technotrend USB 1.0)
+- WinTV-Nexus-s (=Technotrend Premium 2.1 or 2.2)
+- WinTV PVR
+- WinTV PVR 250
+- WinTV PVR 450
+
+US models
+
+-990 WinTV-PVR-350 (249USD) (iTVC15 chipset + radio)
+-980 WinTV-PVR-250 (149USD) (iTVC15 chipset)
+-880 WinTV-PVR-PCI (199USD) (KFIR chipset + bt878)
+-881 WinTV-PVR-USB
+-190 WinTV-GO
+-191 WinTV-GO-FM
+-404 WinTV
+-401 WinTV-radio
+-495 WinTV-Theater
+-602 WinTV-USB
+-621 WinTV-USB-FM
+-600 USB-Live
+-698 WinTV-HD
+-697 WinTV-D
+-564 WinTV-Nexus-S
+
+Deutsche Modelle:
+
+-603 WinTV GO
+-719 WinTV Primio-FM
+-718 WinTV PCI-FM
+-497 WinTV Theater
+-569 WinTV USB
+-568 WinTV USB-FM
+-882 WinTV PVR
+-981 WinTV PVR 250
+-891 WinTV-PVR-USB
+-541 WinTV Nova
+-488 WinTV Nova-Ci
+-564 WinTV-Nexus-s
+-727 WinTV-DVB-c
+-545 Common Interface
+-898 WinTV-Nova-USB
+
+UK models:
+
+-607 WinTV Go
+-693,793 WinTV Primio FM
+-647,747 WinTV PCI FM
+-498 WinTV Theater
+-883 WinTV PVR
+-893 WinTV PVR USB  (Duplicate entry)
+-566 WinTV USB (UK)
+-573 WinTV USB FM
+-429 Impact VCB (bt848)
+-600 USB Live (Video-In 1x Comp, 1xSVHS)
+-542 WinTV Nova
+-717 WinTV DVB-S
+-909 Nova-t PCI
+-893 Nova-t USB   (Duplicate entry)
+-802 MyTV
+-804 MyView
+-809 MyVideo
+-872 MyTV2Go FM
+-546 WinTV Nova-S CI
+-543 WinTV Nova
+-907 Nova-S USB
+-908 Nova-T USB
+-717 WinTV Nexus-S
+-157 DEC3000-s Standalone + USB
+
+Spain:
+
+-685 WinTV-Go
+-690 WinTV-PrimioFM
+-416 WinTV-PCI Nicam Estereo
+-677 WinTV-PCI-FM
+-699 WinTV-Theater
+-683 WinTV-USB
+-678 WinTV-USB-FM
+-983 WinTV-PVR-250
+-883 WinTV-PVR-PCI
+-993 WinTV-PVR-350
+-893 WinTV-PVR-USB
+-728 WinTV-DVB-C PCI
+-832 MyTV2Go
+-869 MyTV2Go-FM
+-805 MyVideo (USB)
+
+
+Matrix-Vision
+~~~~~~~~~~~~~
+
+Models:
+
+- MATRIX-Vision MV-Delta
+- MATRIX-Vision MV-Delta 2
+- MVsigma-SLC (Bt848)
+
+Conceptronic (.net)
+~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- TVCON FM,  TV card w/ FM = CPH05x
+- TVCON = CPH06x
+
+BestData
+~~~~~~~~
+
+Models:
+
+- HCC100 = VCC100rev1 + camera
+- VCC100 rev1 (bt848)
+- VCC100 rev2 (bt878)
+
+Gallant  (www.gallantcom.com) www.minton.com.tw
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- Intervision IV-510 (capture only bt8x8)
+- Intervision IV-550 (bt8x8)
+- Intervision IV-100 (zoran)
+- Intervision IV-1000 (bt8x8)
+
+Asonic (www.asonic.com.cn) (website down)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+SkyEye tv 878
+
+Hoontech
+~~~~~~~~
+
+878TV/FM
+
+Teppro (www.itcteppro.com.tw)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- ITC PCITV (Card Ver 1.0) "Teppro TV1/TVFM1 Card"
+- ITC PCITV (Card Ver 2.0)
+- ITC PCITV (Card Ver 3.0) = "PV-BT878P+ (REV.9D)"
+- ITC PCITV (Card Ver 4.0)
+- TEPPRO IV-550 (For BT848 Main Chip)
+- ITC DSTTV (bt878, satellite)
+- ITC VideoMaker (saa7146, StreamMachine sm2110, tvtuner) "PV-SM2210P+ (REV:1C)"
+
+Kworld (www.kworld.com.tw)
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PC TV Station:
+
+- KWORLD KW-TV878R  TV (no radio)
+- KWORLD KW-TV878RF TV (w/ radio)
+- KWORLD KW-TVL878RF (low profile)
+- KWORLD KW-TV713XRF (saa7134)
+
+
+ MPEG TV Station (same cards as above plus WinDVR Software MPEG en/decoder)
+
+- KWORLD KW-TV878R -Pro   TV (no Radio)
+- KWORLD KW-TV878RF-Pro   TV (w/ Radio)
+- KWORLD KW-TV878R -Ultra TV (no Radio)
+- KWORLD KW-TV878RF-Ultra TV (w/ Radio)
+
+JTT/ Justy Corp.(http://www.jtt.ne.jp/)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+JTT-02 (JTT TV) "TV watchmate pro" (bt848)
+
+ADS www.adstech.com
+~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- Channel Surfer TV ( CHX-950 )
+- Channel Surfer TV+FM ( CHX-960FM )
+
+AVEC www.prochips.com
+~~~~~~~~~~~~~~~~~~~~~
+
+AVEC Intercapture (bt848, tea6320)
+
+NoBrand
+~~~~~~~
+
+TV Excel = Australian Name for "PV-BT878P+ 8E" or "878TV Rev.3\_"
+
+Mach www.machspeed.com
+~~~~~~~~~~~~~~~~~~~~~~
+
+Mach TV 878
+
+Eline www.eline-net.com/
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- Eline Vision TVMaster / TVMaster FM (ELV-TVM/ ELV-TVM-FM) = LR26  (bt878)
+- Eline Vision TVMaster-2000 (ELV-TVM-2000, ELV-TVM-2000-FM)= LR138 (saa713x)
+
+Spirit
+~~~~~~
+
+- Spirit TV Tuner/Video Capture Card (bt848)
+
+Boser www.boser.com.tw
+~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- HS-878 Mini PCI Capture Add-on Card
+- HS-879 Mini PCI 3D Audio and Capture Add-on Card (w/ ES1938 Solo-1)
+
+Satelco www.citycom-gmbh.de, www.satelco.de
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- TV-FM =KNC1 saa7134
+- Standard PCI (DVB-S) = Technotrend Budget
+- Standard PCI (DVB-S) w/ CI
+- Satelco Highend PCI (DVB-S) = Technotrend Premium
+
+
+Sensoray www.sensoray.com
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- Sensoray 311 (PC/104 bus)
+- Sensoray 611 (PCI)
+
+CEI (Chartered Electronics Industries Pte Ltd [CEI] [FCC ID HBY])
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- TV Tuner  -  HBY-33A-RAFFLES  Brooktree Bt848KPF + Philips
+- TV Tuner MG9910  -  HBY33A-TVO  CEI + Philips SAA7110 + OKI M548262 + ST STV8438CV
+- Primetime TV (ISA)
+
+  - acquired by Singapore Technologies
+  - now operating as Chartered Semiconductor Manufacturing
+  - Manufacturer of video cards is listed as:
+
+    - Cogent Electronics Industries [CEI]
+
+AITech
+~~~~~~
+
+Models:
+
+- Wavewatcher TV (ISA)
+- AITech WaveWatcher TV-PCI = can be LR26 (Bt848) or LR50 (BT878)
+- WaveWatcher TVR-202 TV/FM Radio Card (ISA)
+
+MAXRON
+~~~~~~
+
+Maxron MaxTV/FM Radio (KW-TV878-FNT) = Kworld or JW-TV878-FBK
+
+www.ids-imaging.de
+~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- Falcon Series (capture only)
+
+In USA: http://www.theimagingsource.com/
+- DFG/LC1
+
+www.sknet-web.co.jp
+~~~~~~~~~~~~~~~~~~~
+
+SKnet Monster TV (saa7134)
+
+A-Max www.amaxhk.com (Colormax, Amax, Napa)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+APAC Viewcomp 878
+
+Cybertainment
+~~~~~~~~~~~~~
+
+Models:
+
+- CyberMail AV Video Email Kit w/ PCI Capture Card (capture only)
+- CyberMail Xtreme
+
+These are Flyvideo
+
+VCR (http://www.vcrinc.com/)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Video Catcher 16
+
+Twinhan
+~~~~~~~
+
+Models:
+
+- DST Card/DST-IP (bt878, twinhan asic) VP-1020
+  - Sold as:
+
+    - KWorld DVBS Satellite TV-Card
+    - Powercolor DSTV Satellite Tuner Card
+    - Prolink Pixelview DTV2000
+    - Provideo PV-911 Digital Satellite TV Tuner Card With Common Interface ?
+
+- DST-CI Card (DVB Satellite) VP-1030
+- DCT Card (DVB cable)
+
+MSI
+~~~
+
+Models:
+
+- MSI TV@nywhere Tuner Card (MS-8876) (CX23881/883) Not Bt878 compatible.
+- MS-8401 DVB-S
+
+Focus www.focusinfo.com
+~~~~~~~~~~~~~~~~~~~~~~~
+
+InVideo PCI (bt878)
+
+Sdisilk www.sdisilk.com/
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- SDI Silk 100
+- SDI Silk 200 SDI Input Card
+
+www.euresys.com
+~~~~~~~~~~~~~~~
+
+PICOLO series
+
+PMC/Pace
+~~~~~~~~
+
+www.pacecom.co.uk website closed
+
+Mercury www.kobian.com (UK and FR)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- LR50
+- LR138RBG-Rx  == LR138
+
+TEC sound
+~~~~~~~~~
+
+TV-Mate = Zoltrix VP-8482
+
+Though educated googling found: www.techmakers.com
+
+(package and manuals don't have any other manufacturer info) TecSound
+
+Lorenzen www.lorenzen.de
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+SL DVB-S PCI = Technotrend Budget PCI (su1278 or bsru version)
+
+Origo (.uk) www.origo2000.com
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PC TV Card = LR50
+
+I/O Magic www.iomagic.com
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PC PVR - Desktop TV Personal Video Recorder DR-PCTV100 = Pinnacle ROB2D-51009464 4.0 + Cyberlink PowerVCR II
+
+Arowana
+~~~~~~~
+
+TV-Karte / Poso Power TV (?) = Zoltrix VP-8482 (?)
+
+iTVC15 boards
+~~~~~~~~~~~~~
+
+kuroutoshikou.com ITVC15
+yuan.com MPG160 PCI TV (Internal PCI MPEG2 encoder card plus TV-tuner)
+
+Asus www.asuscom.com
+~~~~~~~~~~~~~~~~~~~~
+
+Models:
+
+- Asus TV Tuner Card 880 NTSC (low profile, cx23880)
+- Asus TV (saa7134)
+
+Hoontech
+~~~~~~~~
+
+http://www.hoontech.de/
+
+- HART Vision 848 (H-ART Vision 848)
+- HART Vision 878 (H-Art Vision 878)
+
+
+
+Chips used at bttv devices
+--------------------------
+
+- all boards:
+
+  - Brooktree Bt848/848A/849/878/879: video capture chip
+
+- Board specific
+
+  - Miro PCTV:
+
+    - Philips or Temic Tuner
+
+  - Hauppauge Win/TV pci (version 405):
+
+    - Microchip 24LC02B or Philips 8582E2Y:
+
+       - 256 Byte EEPROM with configuration information
+       - I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf)
+
+    - Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23
+
+    - TDA9800: sound decoder
+
+    - Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem)
+
+    - 14052B: analog switch for selection of sound source
+
+- PAL:
+
+  - TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
+  - TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
+
+- NTSC:
+
+  - TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
+  - TSA5518: no datasheet available on Philips site
+
+- STB TV pci:
+
+  - ???
+  - if you want better support for STB cards send me info!
+    Look at the board! What chips are on it?
+
+
+
+
+Specs
+-----
+
+Philips		http://www.Semiconductors.COM/pip/
+
+Conexant	http://www.conexant.com/
+
+Micronas	http://www.micronas.com/en/home/index.html
+
+Thanks
+------
+
+Many thanks to:
+
+- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848
+  and tuner programming and his control program xtvc.
+
+- Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext
+  package.
+
+- Gerd Hoffmann for the MSP3400 support and the modular
+  I2C, tuner, ... support.
+
+
+- MATRIX Vision for giving us 2 cards for free, which made support of
+  single crystal operation possible.
+
+- MIRO for providing a free PCTV card and detailed information about the
+  components on their cards. (E.g. how the tuner type is detected)
+  Without their card I could not have debugged the NTSC mode.
+
+- Hauppauge for telling how the sound input is selected and what components
+  they do and will use on their radio cards.
+  Also many thanks for faxing me the FM1216 data sheet.
+
+Contributors
+------------
+
+Michael Chu <mmchu@pobox.com>
+  AverMedia fix and more flexible card recognition
+
+Alan Cox <alan@lxorguk.ukuu.org.uk>
+  Video4Linux interface and 2.1.x kernel adaptation
+
+Chris Kleitsch
+  Hardware I2C
+
+Gerd Hoffmann
+  Radio card (ITT sound processor)
+
+bigfoot <bigfoot@net-way.net>
+
+Ragnar Hojland Espinosa <ragnar@macula.net>
+  ConferenceTV card
+
+
++ many more (please mail me if you are missing in this list and would
+	     like to be mentioned)
diff --git a/Documentation/admin-guide/media/building.rst b/Documentation/admin-guide/media/building.rst
new file mode 100644
index 000000000000..c898e3a981c1
--- /dev/null
+++ b/Documentation/admin-guide/media/building.rst
@@ -0,0 +1,357 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+Building support for a media device
+===================================
+
+The first step is to download the Kernel's source code, either via a
+distribution-specific source file or via the Kernel's main git tree\ [1]_.
+
+Please notice, however, that, if:
+
+- you're a braveheart and want to experiment with new stuff;
+- if you want to report a bug;
+- if you're developing new patches
+
+you should use the main media development tree ``master`` branch:
+
+    https://git.linuxtv.org/media_tree.git/
+
+In this case, you may find some useful information at the
+`LinuxTv wiki pages <https://linuxtv.org/wiki>`_:
+
+    https://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
+
+.. [1] The upstream Linux Kernel development tree is located at
+
+       https://git.kernel.org/pub/scm/li  nux/kernel/git/torvalds/linux.git/
+
+Configuring the Linux Kernel
+============================
+
+You can access a menu of Kernel building options with::
+
+    $ make menuconfig
+
+Then, select all desired options and exit it, saving the configuration.
+
+The changed configuration will be at the ``.config`` file. It would
+look like::
+
+    ...
+    # CONFIG_RC_CORE is not set
+    # CONFIG_CEC_CORE is not set
+    CONFIG_MEDIA_SUPPORT=m
+    CONFIG_MEDIA_SUPPORT_FILTER=y
+    ...
+
+The media subsystem is controlled by those menu configuration options::
+
+    Device Drivers --->
+	<M> Remote Controller support  --->
+	[ ] HDMI CEC RC integration
+	[ ] Enable CEC error injection support
+	[*] HDMI CEC drivers  --->
+	<*> Multimedia support  --->
+
+The ``Remote Controller support`` option enables the core support for
+remote controllers\ [2]_.
+
+The ``HDMI CEC RC integration`` option enables integration of HDMI CEC
+with Linux, allowing to receive data via HDMI CEC as if it were produced
+by a remote controller directly connected to the machine.
+
+The ``HDMI CEC drivers`` option allow selecting platform and USB drivers
+that receives and/or transmits CEC codes via HDMI interfaces\ [3]_.
+
+The last option (``Multimedia support``) enables support for cameras,
+audio/video grabbers and TV.
+
+The media subsystem support can either be built together with the main
+Kernel or as a module. For most use cases, it is preferred to have it
+built as modules.
+
+.. note::
+
+   Instead of using a menu, the Kernel provides a script with allows
+   enabling configuration options directly. To enable media support
+   and remote controller support using Kernel modules, you could use::
+
+	$ scripts/config -m RC_CORE
+	$ scripts/config -m MEDIA_SUPPORT
+
+.. [2] ``Remote Controller support`` should also be enabled if you
+       want to use some TV card drivers that may depend on the remote
+       controller core support.
+
+.. [3] Please notice that the DRM subsystem also have drivers for GPUs
+       that use the media HDMI CEC support.
+
+       Those GPU-specific drivers are selected via the ``Graphics support``
+       menu, under ``Device Drivers``.
+
+       When a GPU driver supports supports HDMI CEC, it will automatically
+       enable the CEC core support at the media subsystem.
+
+Media dependencies
+------------------
+
+It should be noticed that enabling the above from a clean config is
+usually not enough. The media subsystem depends on several other Linux
+core support in order to work.
+
+For example, most media devices use a serial communication bus in
+order to talk with some peripherals. Such bus is called I²C
+(Inter-Integrated Circuit). In order to be able to build support
+for such hardware, the I²C bus support should be enabled, either via
+menu or with::
+
+    ./scripts/config -m I2C
+
+Another example: the remote controller core requires support for
+input devices, with can be enabled with::
+
+    ./scripts/config -m INPUT
+
+Other core functionality may also be needed (like PCI and/or USB support),
+depending on the specific driver(s) you would like to enable.
+
+Enabling Remote Controller Support
+----------------------------------
+
+The remote controller menu allows selecting drivers for specific devices.
+It's menu looks like this::
+
+         --- Remote Controller support
+         <M>   Compile Remote Controller keymap modules
+         [*]   LIRC user interface
+         [*]     Support for eBPF programs attached to lirc devices
+         [*]   Remote controller decoders  --->
+         [*]   Remote Controller devices  --->
+
+The ``Compile Remote Controller keymap modules`` option creates key maps for
+several popular remote controllers.
+
+The ``LIRC user interface`` option adds enhanced functionality when using the
+``lirc`` program, by enabling an API that allows userspace to receive raw data
+from remote controllers.
+
+The ``Support for eBPF programs attached to lirc devices`` option allows
+the usage of special programs (called eBPF) that would allow aplications
+to add extra remote controller decoding functionality to the Linux Kernel.
+
+The ``Remote controller decoders`` option allows selecting the
+protocols that will be recognized by the Linux Kernel. Except if you
+want to disable some specific decoder, it is suggested to keep all
+sub-options enabled.
+
+The ``Remote Controller devices`` allows you to select the drivers
+that would be needed to support your device.
+
+The same configuration can also be set via the ``script/config``
+script. So, for instance, in order to support the ITE remote controller
+driver (found on Intel NUCs and on some ASUS x86 desktops), you could do::
+
+	$ scripts/config -e INPUT
+	$ scripts/config -e ACPI
+	$ scripts/config -e MODULES
+	$ scripts/config -m RC_CORE
+	$ scripts/config -e RC_DEVICES
+	$ scripts/config -e RC_DECODERS
+	$ scripts/config -m IR_RC5_DECODER
+	$ scripts/config -m IR_ITE_CIR
+
+Enabling HDMI CEC Support
+-------------------------
+
+The HDMI CEC support is set automatically when a driver requires it. So,
+all you need to do is to enable support either for a graphics card
+that needs it or by one of the existing HDMI drivers.
+
+The HDMI-specific drivers are available at the ``HDMI CEC drivers``
+menu\ [4]_::
+
+	--- HDMI CEC drivers
+	< >   ChromeOS EC CEC driver
+	< >   Amlogic Meson AO CEC driver
+	< >   Amlogic Meson G12A AO CEC driver
+	< >   Generic GPIO-based CEC driver
+	< >   Samsung S5P CEC driver
+	< >   STMicroelectronics STiH4xx HDMI CEC driver
+	< >   STMicroelectronics STM32 HDMI CEC driver
+	< >   Tegra HDMI CEC driver
+	< >   SECO Boards HDMI CEC driver
+	[ ]     SECO Boards IR RC5 support
+	< >   Pulse Eight HDMI CEC
+	< >   RainShadow Tech HDMI CEC
+
+.. [4] The above contents is just an example. The actual options for
+       HDMI devices depends on the system's architecture and may vary
+       on new Kernels.
+
+Enabling Media Support
+----------------------
+
+The Media menu has a lot more options than the remote controller menu.
+Once selected, you should see the following options::
+
+	--- Media support
+	[ ] Filter media drivers
+	[*] Autoselect ancillary drivers
+	    Media device types --->
+	    Media core support --->
+	    Video4Linux options --->
+	    Media controller options --->
+	    Digital TV options --->
+	    HDMI CEC options --->
+	    Media drivers --->
+	    Media ancillary drivers --->
+
+Except if you know exactly what you're doing, or if you want to build
+a driver for a SoC platform, it is strongly recommended to keep the
+``Autoselect ancillary drivers`` option turned on, as it will auto-select
+the needed I²C ancillary drivers.
+
+There are now two ways to select media device drivers, as described
+below.
+
+``Filter media drivers`` menu
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This menu is meant to easy setup for PC and Laptop hardware. It works
+by letting the user to specify what kind of media drivers are desired,
+with those options::
+
+	[ ] Cameras and video grabbers
+	[ ] Analog TV
+	[ ] Digital TV
+	[ ] AM/FM radio receivers/transmitters
+	[ ] Software defined radio
+	[ ] Platform-specific devices
+	[ ] Test drivers
+
+So, if you want to add support to a camera or video grabber only,
+select just the first option. Multiple options are allowed.
+
+Once the options on this menu are selected, the building system will
+auto-select the needed core drivers in order to support the selected
+functionality.
+
+.. note::
+
+   Most TV cards are hybrid: they support both Analog TV and Digital TV.
+
+   If you have an hybrid card, you may need to enable both ``Analog TV``
+   and ``Digital TV`` at the menu.
+
+When using this option, the defaults for the the media support core
+functionality are usually good enough to provide the basic functionality
+for the driver. Yet, you could manually enable some desired extra (optional)
+functionality using the settings under each of the following
+``Media support`` sub-menus::
+
+	    Media core support --->
+	    Video4Linux options --->
+	    Media controller options --->
+	    Digital TV options --->
+	    HDMI CEC options --->
+
+Once you select the desired filters, the drivers that matches the filtering
+criteria will be available at the ``Media support->Media drivers`` sub-menu.
+
+``Media Core Support`` menu without filtering
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If you disable the ``Filter media drivers`` menu, all drivers available
+for your system whose dependencies are met should be shown at the
+``Media drivers`` menu.
+
+Please notice, however, that you should first ensure that the
+``Media Core Support`` menu has all the core functionality your drivers
+would need, as otherwise the corresponding device drivers won't be shown.
+
+Example
+-------
+
+In order to enable modular support for one of the boards listed on
+:doc:`this table <cx231xx-cardlist>`, with modular media core modules, the
+``.config`` file should contain those lines::
+
+    CONFIG_MODULES=y
+    CONFIG_USB=y
+    CONFIG_I2C=y
+    CONFIG_INPUT=y
+    CONFIG_RC_CORE=m
+    CONFIG_MEDIA_SUPPORT=m
+    CONFIG_MEDIA_SUPPORT_FILTER=y
+    CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+    CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+    CONFIG_MEDIA_USB_SUPPORT=y
+    CONFIG_VIDEO_CX231XX=y
+    CONFIG_VIDEO_CX231XX_DVB=y
+
+Building and installing a new Kernel
+====================================
+
+Once the ``.config`` file has everything needed, all it takes to build
+is to run the ``make`` command::
+
+    $ make
+
+And then install the new Kernel and its modules::
+
+    $ sudo make modules_install
+    $ sudo make install
+
+Building just the new media drivers and core
+============================================
+
+Running a new development Kernel from the development tree is usually risky,
+because it may have experimental changes that may have bugs. So, there are
+some ways to build just the new drivers, using alternative trees.
+
+There is the `Linux Kernel backports project
+<https://backports.wiki.kernel.org/index.php/Main_Page>`_, with contains
+newer drivers meant to be compiled against stable Kernels.
+
+The LinuxTV developers, with are responsible for maintaining the media
+subsystem also maintains a backport tree, with just the media drivers
+daily updated from the newest kernel. Such tree is available at:
+
+https://git.linuxtv.org/media_build.git/
+
+It should be noticed that, while it should be relatively safe to use the
+``media_build`` tree for testing purposes, there are not warranties that
+it would work (or even build) on a random Kernel. This tree is maintained
+using a "best-efforts" principle, as time permits us to fix issues there.
+
+If you notice anything wrong on it, feel free to submit patches at the
+Linux media subsystem's mailing list: media@vger.kernel.org. Please
+add ``[PATCH media-build]`` at the e-mail's subject if you submit a new
+patch for the media-build.
+
+Before using it, you should run::
+
+    $ ./build
+
+.. note::
+
+    1) you may need to run it twice if the ``media-build`` tree gets
+       updated;
+    2) you may need to do a ``make distclean`` if you had built it
+       in the past for a different Kernel version than the one you're
+       currently using;
+    3) by default, it will use the same config options for media as
+       the ones defined on the Kernel you're running.
+
+In order to select different drivers or different config options,
+use::
+
+    $ make menuconfig
+
+Then, you can build and install the new drivers::
+
+    $ make && sudo make install
+
+This will override the previous media drivers that your Kernel were
+using.
diff --git a/Documentation/admin-guide/media/cafe_ccic.rst b/Documentation/admin-guide/media/cafe_ccic.rst
new file mode 100644
index 000000000000..ff7fbce1342a
--- /dev/null
+++ b/Documentation/admin-guide/media/cafe_ccic.rst
@@ -0,0 +1,62 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The cafe_ccic driver
+====================
+
+Author: Jonathan Corbet <corbet@lwn.net>
+
+Introduction
+------------
+
+"cafe_ccic" is a driver for the Marvell 88ALP01 "cafe" CMOS camera
+controller.  This is the controller found in first-generation OLPC systems,
+and this driver was written with support from the OLPC project.
+
+Current status: the core driver works.  It can generate data in YUV422,
+RGB565, and RGB444 formats.  (Anybody looking at the code will see RGB32 as
+well, but that is a debugging aid which will be removed shortly).  VGA and
+QVGA modes work; CIF is there but the colors remain funky.  Only the OV7670
+sensor is known to work with this controller at this time.
+
+To try it out: either of these commands will work:
+
+.. code-block:: none
+
+     $ mplayer tv:// -tv driver=v4l2:width=640:height=480 -nosound
+     $ mplayer tv:// -tv driver=v4l2:width=640:height=480:outfmt=bgr16 -nosound
+
+The "xawtv" utility also works; gqcam does not, for unknown reasons.
+
+Load time options
+-----------------
+
+There are a few load-time options, most of which can be changed after
+loading via sysfs as well:
+
+ - alloc_bufs_at_load:  Normally, the driver will not allocate any DMA
+   buffers until the time comes to transfer data.  If this option is set,
+   then worst-case-sized buffers will be allocated at module load time.
+   This option nails down the memory for the life of the module, but
+   perhaps decreases the chances of an allocation failure later on.
+
+ - dma_buf_size: The size of DMA buffers to allocate.  Note that this
+   option is only consulted for load-time allocation; when buffers are
+   allocated at run time, they will be sized appropriately for the current
+   camera settings.
+
+ - n_dma_bufs: The controller can cycle through either two or three DMA
+   buffers.  Normally, the driver tries to use three buffers; on faster
+   systems, however, it will work well with only two.
+
+ - min_buffers: The minimum number of streaming I/O buffers that the driver
+   will consent to work with.  Default is one, but, on slower systems,
+   better behavior with mplayer can be achieved by setting to a higher
+   value (like six).
+
+ - max_buffers: The maximum number of streaming I/O buffers; default is
+   ten.  That number was carefully picked out of a hat and should not be
+   assumed to actually mean much of anything.
+
+ - flip: If this boolean parameter is set, the sensor will be instructed to
+   invert the video image.  Whether it makes sense is determined by how
+   your particular camera is mounted.
diff --git a/Documentation/admin-guide/media/cardlist.rst b/Documentation/admin-guide/media/cardlist.rst
new file mode 100644
index 000000000000..8cdb9d4ca7d6
--- /dev/null
+++ b/Documentation/admin-guide/media/cardlist.rst
@@ -0,0 +1,721 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========
+Cards List
+==========
+
+The media subsystem provide support for lots of PCI and USB drivers, plus
+platform-specific drivers. It also contains several ancillary I²C drivers.
+
+The platform-specific drivers are usually present on embedded systems,
+or are supported by the main board. Usually, setting them is done via
+OpenFirmware or ACPI.
+
+The PCI and USB drivers, however, are independent of the system's board,
+and may be added/removed by the user.
+
+You may also take a look at
+https://linuxtv.org/wiki/index.php/Hardware_Device_Information
+for more details about supported cards.
+
+USB drivers
+===========
+
+The USB boards are identified by an identification called USB ID.
+
+The ``lsusb`` command allows identifying the USB IDs::
+
+    $ lsusb
+    ...
+    Bus 001 Device 015: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
+    Bus 001 Device 074: ID 2040:b131 Hauppauge
+    Bus 001 Device 075: ID 2013:024f PCTV Systems nanoStick T2 290e
+    ...
+
+Newer camera devices use a standard way to expose themselves as such,
+via USB Video Class. Those cameras are automatically supported by the
+``uvc-driver``.
+
+Older cameras and TV USB devices uses USB Vendor Classes: each vendor
+defines its own way to access the device. This section contains
+card lists for such vendor-class devices.
+
+While this is not as common as on PCI, sometimes the same USB ID is used
+by different products. So, several media drivers allow passing a ``card=``
+parameter, in order to setup a card number that would match the correct
+settings for an specific product type.
+
+The current supported USB cards (not including staging drivers) are
+listed below\ [#]_.
+
+.. [#]
+
+   some of the drivers have sub-drivers, not shown at this table.
+   In particular, gspca driver has lots of sub-drivers,
+   for cameras not supported by the USB Video Class (UVC) driver,
+   as shown at :doc:`gspca card list <gspca-cardlist>`.
+
+======================  =========================================================
+Driver                  Name
+======================  =========================================================
+airspy                  AirSpy
+au0828                  Auvitek AU0828
+b2c2-flexcop-usb        Technisat/B2C2 Air/Sky/Cable2PC USB
+cpia2                   CPiA2 Video For Linux
+cx231xx                 Conexant cx231xx USB video capture
+dvb-as102               Abilis AS102 DVB receiver
+dvb-ttusb-budget        Technotrend/Hauppauge Nova - USB devices
+dvb-usb-a800            AVerMedia AverTV DVB-T USB 2.0 (A800)
+dvb-usb-af9005          Afatech AF9005 DVB-T USB1.1
+dvb-usb-af9015          Afatech AF9015 DVB-T USB2.0
+dvb-usb-af9035          Afatech AF9035 DVB-T USB2.0
+dvb-usb-anysee          Anysee DVB-T/C USB2.0
+dvb-usb-au6610          Alcor Micro AU6610 USB2.0
+dvb-usb-az6007          AzureWave 6007 and clones DVB-T/C USB2.0
+dvb-usb-az6027          Azurewave DVB-S/S2 USB2.0 AZ6027
+dvb-usb-ce6230          Intel CE6230 DVB-T USB2.0
+dvb-usb-cinergyT2       Terratec CinergyT2/qanu USB 2.0 DVB-T
+dvb-usb-cxusb           Conexant USB2.0 hybrid
+dvb-usb-dib0700         DiBcom DiB0700
+dvb-usb-dibusb-common   DiBcom DiB3000M-B
+dvb-usb-dibusb-mc       DiBcom DiB3000M-C/P
+dvb-usb-digitv          Nebula Electronics uDigiTV DVB-T USB2.0
+dvb-usb-dtt200u         WideView WT-200U and WT-220U (pen) DVB-T
+dvb-usb-dtv5100         AME DTV-5100 USB2.0 DVB-T
+dvb-usb-dvbsky          DVBSky USB
+dvb-usb-dw2102          DvbWorld & TeVii DVB-S/S2 USB2.0
+dvb-usb-ec168           E3C EC168 DVB-T USB2.0
+dvb-usb-gl861           Genesys Logic GL861 USB2.0
+dvb-usb-gp8psk          GENPIX 8PSK->USB module
+dvb-usb-lmedm04         LME DM04/QQBOX DVB-S USB2.0
+dvb-usb-m920x           Uli m920x DVB-T USB2.0
+dvb-usb-nova-t-usb2     Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0
+dvb-usb-opera           Opera1 DVB-S USB2.0 receiver
+dvb-usb-pctv452e        Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600
+dvb-usb-rtl28xxu        Realtek RTL28xxU DVB USB
+dvb-usb-technisat-usb2  Technisat DVB-S/S2 USB2.0
+dvb-usb-ttusb2          Pinnacle 400e DVB-S USB2.0
+dvb-usb-umt-010         HanfTek UMT-010 DVB-T USB2.0
+dvb_usb_v2              Support for various USB DVB devices v2
+dvb-usb-vp702x          TwinhanDTV StarBox and clones DVB-S USB2.0
+dvb-usb-vp7045          TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0
+em28xx                  Empia EM28xx USB devices
+go7007                  WIS GO7007 MPEG encoder
+gspca                   Drivers for several USB Cameras
+hackrf                  HackRF
+hdpvr                   Hauppauge HD PVR
+msi2500                 Mirics MSi2500
+mxl111sf-tuner          MxL111SF DTV USB2.0
+pvrusb2                 Hauppauge WinTV-PVR USB2
+pwc                     USB Philips Cameras
+s2250                   Sensoray 2250/2251
+s2255drv                USB Sensoray 2255 video capture device
+smsusb                  Siano SMS1xxx based MDTV receiver
+stkwebcam               USB Syntek DC1125 Camera
+tm6000-alsa             TV Master TM5600/6000/6010 audio
+tm6000-dvb              DVB Support for tm6000 based TV cards
+tm6000                  TV Master TM5600/6000/6010 driver
+ttusb_dec               Technotrend/Hauppauge USB DEC devices
+usbtv                   USBTV007 video capture
+uvcvideo                USB Video Class (UVC)
+zd1301                  ZyDAS ZD1301
+zr364xx                 USB ZR364XX Camera
+======================  =========================================================
+
+.. toctree::
+	:maxdepth: 1
+
+	au0828-cardlist
+	cx231xx-cardlist
+	em28xx-cardlist
+	tm6000-cardlist
+	siano-cardlist
+	usbvision-cardlist
+
+	gspca-cardlist
+
+	dvb-usb-dib0700-cardlist
+	dvb-usb-dibusb-mb-cardlist
+	dvb-usb-dibusb-mc-cardlist
+
+	dvb-usb-a800-cardlist
+	dvb-usb-af9005-cardlist
+	dvb-usb-az6027-cardlist
+	dvb-usb-cinergyT2-cardlist
+	dvb-usb-cxusb-cardlist
+	dvb-usb-digitv-cardlist
+	dvb-usb-dtt200u-cardlist
+	dvb-usb-dtv5100-cardlist
+	dvb-usb-dw2102-cardlist
+	dvb-usb-gp8psk-cardlist
+	dvb-usb-m920x-cardlist
+	dvb-usb-nova-t-usb2-cardlist
+	dvb-usb-opera1-cardlist
+	dvb-usb-pctv452e-cardlist
+	dvb-usb-technisat-usb2-cardlist
+	dvb-usb-ttusb2-cardlist
+	dvb-usb-umt-010-cardlist
+	dvb-usb-vp702x-cardlist
+	dvb-usb-vp7045-cardlist
+
+	dvb-usb-af9015-cardlist
+	dvb-usb-af9035-cardlist
+	dvb-usb-anysee-cardlist
+	dvb-usb-au6610-cardlist
+	dvb-usb-az6007-cardlist
+	dvb-usb-ce6230-cardlist
+	dvb-usb-dvbsky-cardlist
+	dvb-usb-ec168-cardlist
+	dvb-usb-gl861-cardlist
+	dvb-usb-lmedm04-cardlist
+	dvb-usb-mxl111sf-cardlist
+	dvb-usb-rtl28xxu-cardlist
+	dvb-usb-zd1301-cardlist
+
+	other-usb-cardlist
+
+PCI drivers
+===========
+
+The PCI boards are identified by an identification called PCI ID. The PCI ID
+is actually composed by two parts:
+
+	- Vendor ID and device ID;
+	- Subsystem ID and Subsystem device ID;
+
+The ``lspci -nn`` command allows identifying the vendor/device PCI IDs::
+
+    $ lspci -nn
+    ...
+    00:0b.0 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)
+    01:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb [14f1:8880] (rev 0f)
+    01:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
+    02:01.0 Multimedia video controller [0400]: Internext Compression Inc iTVC15 (CX23415) Video Decoder [4444:0803] (rev 01)
+    02:02.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder [14f1:5b7a]
+    02:03.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
+    ...
+
+The subsystem IDs can be obtained using ``lspci -vn``
+
+.. code-block:: none
+   :emphasize-lines: 4
+
+    $ lspci -vn
+    ...
+	01:01.0 0480: 1131:7133 (rev d1)
+	        Subsystem: 1461:f01d
+	        Flags: bus master, medium devsel, latency 32, IRQ 209
+	        Memory at e2002000 (32-bit, non-prefetchable) [size=2K]
+	        Capabilities: [40] Power Management version 2
+    ...
+
+Unfortunately, sometimes the same PCI ID is used by different products.
+So, several media drivers allow passing a ``card=`` parameter, in order
+to setup a card number that would match the correct settings for an
+specific board.
+
+The current supported PCI/PCIe cards (not including staging drivers) are
+listed below\ [#]_.
+
+.. [#] some of the drivers have sub-drivers, not shown at this table
+
+================  ========================================================
+Driver            Name
+================  ========================================================
+altera-ci         Altera FPGA based CI module
+b2c2-flexcop-pci  Technisat/B2C2 Air/Sky/Cable2PC PCI
+bt878             DVB/ATSC Support for bt878 based TV cards
+bttv              BT8x8 Video For Linux
+cobalt            Cisco Cobalt
+cx18              Conexant cx23418 MPEG encoder
+cx23885           Conexant cx23885 (2388x successor)
+cx25821           Conexant cx25821
+cx88xx            Conexant 2388x (bt878 successor)
+ddbridge          Digital Devices bridge
+dm1105            SDMC DM1105 based PCI cards
+dt3155            DT3155 frame grabber
+dvb-ttpci         AV7110 cards
+earth-pt1         PT1 cards
+earth-pt3         Earthsoft PT3 cards
+hexium_gemini     Hexium Gemini frame grabber
+hexium_orion      Hexium HV-PCI6 and Orion frame grabber
+hopper            HOPPER based cards
+ipu3-cio2         Intel ipu3-cio2 driver
+ivtv              Conexant cx23416/cx23415 MPEG encoder/decoder
+ivtvfb            Conexant cx23415 framebuffer
+mantis            MANTIS based cards
+meye              Sony Vaio Picturebook Motion Eye
+mxb               Siemens-Nixdorf 'Multimedia eXtension Board'
+netup-unidvb      NetUP Universal DVB card
+ngene             Micronas nGene
+pluto2            Pluto2 cards
+saa7134           Philips SAA7134
+saa7164           NXP SAA7164
+smipcie           SMI PCIe DVBSky cards
+solo6x10          Bluecherry / Softlogic 6x10 capture cards (MPEG-4/H.264)
+sta2x11_vip       STA2X11 VIP Video For Linux
+tw5864            Techwell TW5864 video/audio grabber and encoder
+tw686x            Intersil/Techwell TW686x
+tw68              Techwell tw68x Video For Linux
+================  ========================================================
+
+Some of those drivers support multiple devices, as shown at the card
+lists below:
+
+.. toctree::
+	:maxdepth: 1
+
+	bttv-cardlist
+	cx18-cardlist
+	cx23885-cardlist
+	cx88-cardlist
+	ivtv-cardlist
+	saa7134-cardlist
+	saa7164-cardlist
+
+Platform drivers
+================
+
+There are several drivers that are focused on providing support for
+functionality that are already included at the main board, and don't
+use neither USB nor PCI bus. Those drivers are called platform
+drivers, and are very popular on embedded devices.
+
+The current supported of platform drivers (not including staging drivers) are
+listed below
+
+=================  ============================================================
+Driver             Name
+=================  ============================================================
+am437x-vpfe        TI AM437x VPFE
+aspeed-video       Aspeed AST2400 and AST2500
+atmel-isc          ATMEL Image Sensor Controller (ISC)
+atmel-isi          ATMEL Image Sensor Interface (ISI)
+c8sectpfe          SDR platform devices
+c8sectpfe          SDR platform devices
+cafe_ccic          Marvell 88ALP01 (Cafe) CMOS Camera Controller
+cdns-csi2rx        Cadence MIPI-CSI2 RX Controller
+cdns-csi2tx        Cadence MIPI-CSI2 TX Controller
+coda-vpu           Chips&Media Coda multi-standard codec IP
+dm355_ccdc         TI DM355 CCDC video capture
+dm644x_ccdc        TI DM6446 CCDC video capture
+exynos-fimc-is     EXYNOS4x12 FIMC-IS (Imaging Subsystem)
+exynos-fimc-lite   EXYNOS FIMC-LITE camera interface
+exynos-gsc         Samsung Exynos G-Scaler
+exy                Samsung S5P/EXYNOS4 SoC series Camera Subsystem
+fsl-viu            Freescale VIU
+imx-pxp            i.MX Pixel Pipeline (PXP)
+isdf               TI DM365 ISIF video capture
+mmp_camera         Marvell Armada 610 integrated camera controller
+mtk_jpeg           Mediatek JPEG Codec
+mtk-mdp            Mediatek MDP
+mtk-vcodec-dec     Mediatek Video Codec
+mtk-vpu            Mediatek Video Processor Unit
+mx2_emmaprp        MX2 eMMa-PrP
+omap3-isp          OMAP 3 Camera
+omap-vout          OMAP2/OMAP3 V4L2-Display
+pxa_camera         PXA27x Quick Capture Interface
+qcom-camss         Qualcomm V4L2 Camera Subsystem
+rcar-csi2          R-Car MIPI CSI-2 Receiver
+rcar_drif          Renesas Digital Radio Interface (DRIF)
+rcar-fcp           Renesas Frame Compression Processor
+rcar_fdp1          Renesas Fine Display Processor
+rcar_jpu           Renesas JPEG Processing Unit
+rcar-vin           R-Car Video Input (VIN)
+renesas-ceu        Renesas Capture Engine Unit (CEU)
+rockchip-rga       Rockchip Raster 2d Graphic Acceleration Unit
+s3c-camif          Samsung S3C24XX/S3C64XX SoC Camera Interface
+s5p-csis           S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS)
+s5p-fimc           S5P/EXYNOS4 FIMC/CAMIF camera interface
+s5p-g2d            Samsung S5P and EXYNOS4 G2D 2d graphics accelerator
+s5p-jpeg           Samsung S5P/Exynos3250/Exynos4 JPEG codec
+s5p-mfc            Samsung S5P MFC Video Codec
+sh_veu             SuperH VEU mem2mem video processing
+sh_vou             SuperH VOU video output
+stm32-dcmi         STM32 Digital Camera Memory Interface (DCMI)
+sun4i-csi          Allwinner A10 CMOS Sensor Interface Support
+sun6i-csi          Allwinner V3s Camera Sensor Interface
+sun8i-di           Allwinner Deinterlace
+sun8i-rotate       Allwinner DE2 rotation
+ti-cal             TI Memory-to-memory multimedia devices
+ti-csc             TI DVB platform devices
+ti-vpe             TI VPE (Video Processing Engine)
+venus-enc          Qualcomm Venus V4L2 encoder/decoder
+via-camera         VIAFB camera controller
+video-mux          Video Multiplexer
+vpif_display       TI DaVinci VPIF V4L2-Display
+vpif_capture       TI DaVinci VPIF video capture
+vpss               TI DaVinci VPBE V4L2-Display
+vsp1               Renesas VSP1 Video Processing Engine
+xilinx-tpg         Xilinx Video Test Pattern Generator
+xilinx-video       Xilinx Video IP (EXPERIMENTAL)
+xilinx-vtc         Xilinx Video Timing Controller
+=================  ============================================================
+
+MMC/SDIO DVB adapters
+---------------------
+
+=======  ===========================================
+Driver   Name
+=======  ===========================================
+smssdio  Siano SMS1xxx based MDTV via SDIO interface
+=======  ===========================================
+
+Firewire driver
+===============
+
+The media subsystem also provides a firewire driver for digital TV:
+
+=======  =====================
+Driver   Name
+=======  =====================
+firedtv  FireDTV and FloppyDTV
+=======  =====================
+
+Radio drivers
+=============
+
+There is also support for pure AM/FM radio, and even for some FM radio
+transmitters:
+
+=====================  =========================================================
+Driver                 Name
+=====================  =========================================================
+si4713                 Silicon Labs Si4713 FM Radio Transmitter
+radio-aztech           Aztech/Packard Bell Radio
+radio-cadet            ADS Cadet AM/FM Tuner
+radio-gemtek           GemTek Radio card (or compatible)
+radio-maxiradio        Guillemot MAXI Radio FM 2000 radio
+radio-miropcm20        miroSOUND PCM20 radio
+radio-aimslab          AIMSlab RadioTrack (aka RadioReveal)
+radio-rtrack2          AIMSlab RadioTrack II
+saa7706h               SAA7706H Car Radio DSP
+radio-sf16fmi          SF16-FMI/SF16-FMP/SF16-FMD Radio
+radio-sf16fmr2         SF16-FMR2/SF16-FMD2 Radio
+radio-shark            Griffin radioSHARK USB radio receiver
+shark2                 Griffin radioSHARK2 USB radio receiver
+radio-si470x-common    Silicon Labs Si470x FM Radio Receiver
+radio-si476x           Silicon Laboratories Si476x I2C FM Radio
+radio-tea5764          TEA5764 I2C FM radio
+tef6862                TEF6862 Car Radio Enhanced Selectivity Tuner
+radio-terratec         TerraTec ActiveRadio ISA Standalone
+radio-timb             Enable the Timberdale radio driver
+radio-trust            Trust FM radio card
+radio-typhoon          Typhoon Radio (a.k.a. EcoRadio)
+radio-wl1273           Texas Instruments WL1273 I2C FM Radio
+fm_drv                 ISA radio devices
+fm_drv                 ISA radio devices
+radio-zoltrix          Zoltrix Radio
+dsbr100                D-Link/GemTek USB FM radio
+radio-keene            Keene FM Transmitter USB
+radio-ma901            Masterkit MA901 USB FM radio
+radio-mr800            AverMedia MR 800 USB FM radio
+radio-raremono         Thanko's Raremono AM/FM/SW radio
+radio-si470x-usb       Silicon Labs Si470x FM Radio Receiver support with USB
+radio-usb-si4713       Silicon Labs Si4713 FM Radio Transmitter support with USB
+=====================  =========================================================
+
+I²C drivers
+===========
+
+The I²C (Inter-Integrated Circuit) bus is a three-wires bus used internally
+at the media cards for communication between different chips. While the bus
+is not visible to the Linux Kernel, drivers need to send and receive
+commands via the bus. The Linux Kernel driver abstraction has support to
+implement different drivers for each component inside an I²C bus, as if
+the bus were visible to the main system board.
+
+One of the problems with I²C devices is that sometimes the same device may
+work with different I²C hardware. This is common, for example, on devices
+that comes with a tuner for North America market, and another one for
+Europe. Some drivers have a ``tuner=`` modprobe parameter to allow using a
+different tuner number in order to address such issue.
+
+The current supported of I²C drivers (not including staging drivers) are
+listed below.
+
+Audio decoders, processors and mixers
+-------------------------------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+cs3308        Cirrus Logic CS3308 audio ADC
+cs5345        Cirrus Logic CS5345 audio ADC
+cs53l32a      Cirrus Logic CS53L32A audio ADC
+msp3400       Micronas MSP34xx audio decoders
+sony-btf-mpx  Sony BTF's internal MPX
+tda1997x      NXP TDA1997x HDMI receiver
+tda7432       Philips TDA7432 audio processor
+tda9840       Philips TDA9840 audio processor
+tea6415c      Philips TEA6415C audio processor
+tea6420       Philips TEA6420 audio processor
+tlv320aic23b  Texas Instruments TLV320AIC23B audio codec
+tvaudio       Simple audio decoder chips
+uda1342       Philips UDA1342 audio codec
+vp27smpx      Panasonic VP27's internal MPX
+wm8739        Wolfson Microelectronics WM8739 stereo audio ADC
+wm8775        Wolfson Microelectronics WM8775 audio ADC with input mixer
+============  ==========================================================
+
+Audio/Video compression chips
+-----------------------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+saa6752hs     Philips SAA6752HS MPEG-2 Audio/Video Encoder
+============  ==========================================================
+
+Camera sensor devices
+---------------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+et8ek8        ET8EK8 camera sensor
+hi556         Hynix Hi-556 sensor
+imx214        Sony IMX214 sensor
+imx219        Sony IMX219 sensor
+imx258        Sony IMX258 sensor
+imx274        Sony IMX274 sensor
+imx290        Sony IMX290 sensor
+imx319        Sony IMX319 sensor
+imx355        Sony IMX355 sensor
+m5mols        Fujitsu M-5MOLS 8MP sensor
+mt9m001       mt9m001
+mt9m032       MT9M032 camera sensor
+mt9m111       mt9m111, mt9m112 and mt9m131
+mt9p031       Aptina MT9P031
+mt9t001       Aptina MT9T001
+mt9t112       Aptina MT9T111/MT9T112
+mt9v011       Micron mt9v011 sensor
+mt9v032       Micron MT9V032 sensor
+mt9v111       Aptina MT9V111 sensor
+noon010pc30   Siliconfile NOON010PC30 sensor
+ov13858       OmniVision OV13858 sensor
+ov2640        OmniVision OV2640 sensor
+ov2659        OmniVision OV2659 sensor
+ov2680        OmniVision OV2680 sensor
+ov2685        OmniVision OV2685 sensor
+ov5640        OmniVision OV5640 sensor
+ov5645        OmniVision OV5645 sensor
+ov5647        OmniVision OV5647 sensor
+ov5670        OmniVision OV5670 sensor
+ov5675        OmniVision OV5675 sensor
+ov5695        OmniVision OV5695 sensor
+ov6650        OmniVision OV6650 sensor
+ov7251        OmniVision OV7251 sensor
+ov7640        OmniVision OV7640 sensor
+ov7670        OmniVision OV7670 sensor
+ov772x        OmniVision OV772x sensor
+ov7740        OmniVision OV7740 sensor
+ov8856        OmniVision OV8856 sensor
+ov9640        OmniVision OV9640 sensor
+ov9650        OmniVision OV9650/OV9652 sensor
+rj54n1cb0c    Sharp RJ54N1CB0C sensor
+s5c73m3       Samsung S5C73M3 sensor
+s5k4ecgx      Samsung S5K4ECGX sensor
+s5k5baf       Samsung S5K5BAF sensor
+s5k6a3        Samsung S5K6A3 sensor
+s5k6aa        Samsung S5K6AAFX sensor
+smiapp        SMIA++/SMIA sensor
+sr030pc30     Siliconfile SR030PC30 sensor
+vs6624        ST VS6624 sensor
+============  ==========================================================
+
+Flash devices
+-------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+adp1653       ADP1653 flash
+lm3560        LM3560 dual flash driver
+lm3646        LM3646 dual flash driver
+============  ==========================================================
+
+IR I2C driver
+-------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+ir-kbd-i2c    I2C module for IR
+============  ==========================================================
+
+Lens drivers
+------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+ad5820        AD5820 lens voice coil
+ak7375        AK7375 lens voice coil
+dw9714        DW9714 lens voice coil
+dw9807-vcm    DW9807 lens voice coil
+============  ==========================================================
+
+Miscellaneous helper chips
+--------------------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+video-i2c     I2C transport video
+m52790        Mitsubishi M52790 A/V switch
+st-mipid02    STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
+ths7303       THS7303/53 Video Amplifier
+============  ==========================================================
+
+RDS decoders
+------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+saa6588       SAA6588 Radio Chip RDS decoder
+============  ==========================================================
+
+SDR tuner chips
+---------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+max2175       Maxim 2175 RF to Bits tuner
+============  ==========================================================
+
+Video and audio decoders
+------------------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+cx25840       Conexant CX2584x audio/video decoders
+saa717x       Philips SAA7171/3/4 audio/video decoders
+============  ==========================================================
+
+Video decoders
+--------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+adv7180       Analog Devices ADV7180 decoder
+adv7183       Analog Devices ADV7183 decoder
+adv748x       Analog Devices ADV748x decoder
+adv7604       Analog Devices ADV7604 decoder
+adv7842       Analog Devices ADV7842 decoder
+bt819         BT819A VideoStream decoder
+bt856         BT856 VideoStream decoder
+bt866         BT866 VideoStream decoder
+ks0127        KS0127 video decoder
+ml86v7667     OKI ML86V7667 video decoder
+saa7110       Philips SAA7110 video decoder
+saa7115       Philips SAA7111/3/4/5 video decoders
+tc358743      Toshiba TC358743 decoder
+tvp514x       Texas Instruments TVP514x video decoder
+tvp5150       Texas Instruments TVP5150 video decoder
+tvp7002       Texas Instruments TVP7002 video decoder
+tw2804        Techwell TW2804 multiple video decoder
+tw9903        Techwell TW9903 video decoder
+tw9906        Techwell TW9906 video decoder
+tw9910        Techwell TW9910 video decoder
+vpx3220       vpx3220a, vpx3216b & vpx3214c video decoders
+============  ==========================================================
+
+Video encoders
+--------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+ad9389b       Analog Devices AD9389B encoder
+adv7170       Analog Devices ADV7170 video encoder
+adv7175       Analog Devices ADV7175 video encoder
+adv7343       ADV7343 video encoder
+adv7393       ADV7393 video encoder
+adv7511-v4l2  Analog Devices ADV7511 encoder
+ak881x        AK8813/AK8814 video encoders
+saa7127       Philips SAA7127/9 digital video encoders
+saa7185       Philips SAA7185 video encoder
+ths8200       Texas Instruments THS8200 video encoder
+============  ==========================================================
+
+Video improvement chips
+-----------------------
+
+============  ==========================================================
+Driver        Name
+============  ==========================================================
+upd64031a     NEC Electronics uPD64031A Ghost Reduction
+upd64083      NEC Electronics uPD64083 3-Dimensional Y/C separation
+============  ==========================================================
+
+Tuner drivers
+-------------
+
+============  ==================================================
+Driver        Name
+============  ==================================================
+e4000         Elonics E4000 silicon tuner
+fc0011        Fitipower FC0011 silicon tuner
+fc0012        Fitipower FC0012 silicon tuner
+fc0013        Fitipower FC0013 silicon tuner
+fc2580        FCI FC2580 silicon tuner
+it913x        ITE Tech IT913x silicon tuner
+m88rs6000t    Montage M88RS6000 internal tuner
+max2165       Maxim MAX2165 silicon tuner
+mc44s803      Freescale MC44S803 Low Power CMOS Broadband tuners
+msi001        Mirics MSi001
+mt2060        Microtune MT2060 silicon IF tuner
+mt2063        Microtune MT2063 silicon IF tuner
+mt20xx        Microtune 2032 / 2050 tuners
+mt2131        Microtune MT2131 silicon tuner
+mt2266        Microtune MT2266 silicon tuner
+mxl301rf      MaxLinear MxL301RF tuner
+mxl5005s      MaxLinear MSL5005S silicon tuner
+mxl5007t      MaxLinear MxL5007T silicon tuner
+qm1d1b0004    Sharp QM1D1B0004 tuner
+qm1d1c0042    Sharp QM1D1C0042 tuner
+qt1010        Quantek QT1010 silicon tuner
+r820t         Rafael Micro R820T silicon tuner
+si2157        Silicon Labs Si2157 silicon tuner
+tuner-types   Simple tuner support
+tda18212      NXP TDA18212 silicon tuner
+tda18218      NXP TDA18218 silicon tuner
+tda18250      NXP TDA18250 silicon tuner
+tda18271      NXP TDA18271 silicon tuner
+tda827x       Philips TDA827X silicon tuner
+tda8290       TDA 8290/8295 + 8275(a)/18271 tuner combo
+tda9887       TDA 9885/6/7 analog IF demodulator
+tea5761       TEA 5761 radio tuner
+tea5767       TEA 5767 radio tuner
+tua9001       Infineon TUA9001 silicon tuner
+tuner-xc2028  XCeive xc2028/xc3028 tuners
+xc4000        Xceive XC4000 silicon tuner
+xc5000        Xceive XC5000 silicon tuner
+============  ==================================================
+
+.. toctree::
+	:maxdepth: 1
+
+	tuner-cardlist
+	frontend-cardlist
+
+Test drivers
+============
+
+In order to test userspace applications, there's a number of virtual
+drivers, with provide test functionality, simulating real hardware
+devices:
+
+=======  ======================================
+Driver   Name
+=======  ======================================
+vicodec  Virtual Codec Driver
+vim2m    Virtual Memory-to-Memory Driver
+vimc     Virtual Media Controller Driver (VIMC)
+vivid    Virtual Video Test Driver
+=======  ======================================
diff --git a/Documentation/admin-guide/media/cec-drivers.rst b/Documentation/admin-guide/media/cec-drivers.rst
new file mode 100644
index 000000000000..8d9686c08df9
--- /dev/null
+++ b/Documentation/admin-guide/media/cec-drivers.rst
@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+CEC driver-specific documentation
+=================================
+
+.. toctree::
+	:maxdepth: 2
+
+	pulse8-cec
diff --git a/Documentation/admin-guide/media/ci.rst b/Documentation/admin-guide/media/ci.rst
new file mode 100644
index 000000000000..ded4d8fbbf92
--- /dev/null
+++ b/Documentation/admin-guide/media/ci.rst
@@ -0,0 +1,77 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Digital TV Conditional Access Interface
+=======================================
+
+
+.. note::
+
+   This documentation is outdated.
+
+This document describes the usage of the high level CI API as
+in accordance to the Linux DVB API. This is a not a documentation for the,
+existing low level CI API.
+
+.. note::
+
+   For the Twinhan/Twinhan clones, the dst_ca module handles the CI
+   hardware handling. This module is loaded automatically if a CI
+   (Common Interface, that holds the CAM (Conditional Access Module)
+   is detected.
+
+ca_zap
+~~~~~~
+
+A userspace application, like ``ca_zap`` is required to handle encrypted
+MPEG-TS streams.
+
+The ``ca_zap`` userland application is in charge of sending the
+descrambling related information to the Conditional Access Module (CAM).
+
+This application requires the following to function properly as of now.
+
+a) Tune to a valid channel, with szap.
+
+  eg: $ szap -c channels.conf -r "TMC" -x
+
+b) a channels.conf containing a valid PMT PID
+
+  eg: TMC:11996:h:0:27500:278:512:650:321
+
+  here 278 is a valid PMT PID. the rest of the values are the
+  same ones that szap uses.
+
+c) after running a szap, you have to run ca_zap, for the
+   descrambler to function,
+
+  eg: $ ca_zap channels.conf "TMC"
+
+d) Hopefully enjoy your favourite subscribed channel as you do with
+   a FTA card.
+
+.. note::
+
+  Currently ca_zap, and dst_test, both are meant for demonstration
+  purposes only, they can become full fledged applications if necessary.
+
+
+Cards that fall in this category
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+At present the cards that fall in this category are the Twinhan and its
+clones, these cards are available as VVMER, Tomato, Hercules, Orange and
+so on.
+
+CI modules that are supported
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The CI module support is largely dependent upon the firmware on the cards
+Some cards do support almost all of the available CI modules. There is
+nothing much that can be done in order to make additional CI modules
+working with these cards.
+
+Modules that have been tested by this driver at present are
+
+(1) Irdeto 1 and 2 from SCM
+(2) Viaccess from SCM
+(3) Dragoncam
diff --git a/Documentation/admin-guide/media/cpia2.rst b/Documentation/admin-guide/media/cpia2.rst
new file mode 100644
index 000000000000..f6ffef686462
--- /dev/null
+++ b/Documentation/admin-guide/media/cpia2.rst
@@ -0,0 +1,145 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The cpia2 driver
+================
+
+Authors: Peter Pregler <Peter_Pregler@email.com>,
+Scott J. Bertin <scottbertin@yahoo.com>, and
+Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which
+this one was modelled from.
+
+Introduction
+------------
+
+This is a driver for STMicroelectronics's CPiA2 (second generation
+Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG
+stream at up to vga size. It implements the Video4Linux interface as much as
+possible.  Since the V4L interface does not support compressed formats, only
+an mjpeg enabled application can be used with the camera. We have modified the
+gqcam application to view this stream.
+
+The driver is implemented as two kernel modules. The cpia2 module
+contains the camera functions and the V4L interface.  The cpia2_usb module
+contains usb specific functions.  The main reason for this was the size of the
+module was getting out of hand, so I separated them.  It is not likely that
+there will be a parallel port version.
+
+Features
+--------
+
+- Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos
+  sensors. I only have the vga sensor, so can't test the other.
+- Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between.
+  VGA and QVGA are the native image sizes for the VGA camera. CIF is done
+  in the coprocessor by scaling QVGA.  All other sizes are done by clipping.
+- Palette: YCrCb, compressed with MJPEG.
+- Some compression parameters are settable.
+- Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA).
+- Adjust brightness, color, contrast while streaming.
+- Flicker control settable for 50 or 60 Hz mains frequency.
+
+Making and installing the stv672 driver modules
+-----------------------------------------------
+
+Requirements
+~~~~~~~~~~~~
+
+Video4Linux must be either compiled into the kernel or
+available as a module.  Video4Linux2 is automatically detected and made
+available at compile time.
+
+Setup
+~~~~~
+
+Use ``modprobe cpia2`` to load and ``modprobe -r cpia2`` to unload. This
+may be done automatically by your distribution.
+
+Driver options
+~~~~~~~~~~~~~~
+
+.. tabularcolumns:: |p{13ex}|L|
+
+
+==============  ========================================================
+Option		Description
+==============  ========================================================
+video_nr	video device to register (0=/dev/video0, etc)
+		range -1 to 64.  default is -1 (first available)
+		If you have more than 1 camera, this MUST be -1.
+buffer_size	Size for each frame buffer in bytes (default 68k)
+num_buffers	Number of frame buffers (1-32, default 3)
+alternate	USB Alternate (2-7, default 7)
+flicker_freq	Frequency for flicker reduction(50 or 60, default 60)
+flicker_mode	0 to disable, or 1 to enable flicker reduction.
+		(default 0). This is only effective if the camera
+		uses a stv0672 coprocessor.
+==============  ========================================================
+
+Setting the options
+~~~~~~~~~~~~~~~~~~~
+
+If you are using modules, edit /etc/modules.conf and add an options
+line like this::
+
+	options cpia2 num_buffers=3 buffer_size=65535
+
+If the driver is compiled into the kernel, at boot time specify them
+like this::
+
+	cpia2.num_buffers=3 cpia2.buffer_size=65535
+
+What buffer size should I use?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The maximum image size depends on the alternate you choose, and the
+frame rate achieved by the camera.  If the compression engine is able to
+keep up with the frame rate, the maximum image size is given by the table
+below.
+
+The compression engine starts out at maximum compression, and will
+increase image quality until it is close to the size in the table.  As long
+as the compression engine can keep up with the frame rate, after a short time
+the images will all be about the size in the table, regardless of resolution.
+
+At low alternate settings, the compression engine may not be able to
+compress the image enough and will reduce the frame rate by producing larger
+images.
+
+The default of 68k should be good for most users.  This will handle
+any alternate at frame rates down to 15fps.  For lower frame rates, it may
+be necessary to increase the buffer size to avoid having frames dropped due
+to insufficient space.
+
+========== ========== ======== =====
+Alternate  bytes/ms   15fps    30fps
+========== ========== ======== =====
+    2         128      8533     4267
+    3         384     25600    12800
+    4         640     42667    21333
+    5         768     51200    25600
+    6         896     59733    29867
+    7        1023     68200    34100
+========== ========== ======== =====
+
+Table: Image size(bytes)
+
+
+How many buffers should I use?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For normal streaming, 3 should give the best results.  With only 2,
+it is possible for the camera to finish sending one image just after a
+program has started reading the other.  If this happens, the driver must drop
+a frame.  The exception to this is if you have a heavily loaded machine.  In
+this case use 2 buffers.  You are probably not reading at the full frame rate.
+If the camera can send multiple images before a read finishes, it could
+overwrite the third buffer before the read finishes, leading to a corrupt
+image.  Single and double buffering have extra checks to avoid overwriting.
+
+Using the camera
+~~~~~~~~~~~~~~~~
+
+We are providing a modified gqcam application to view the output. In
+order to avoid confusion, here it is called mview.  There is also the qx5view
+program which can also control the lights on the qx5 microscope. MJPEG Tools
+(http://mjpeg.sourceforge.net) can also be used to record from the camera.
diff --git a/Documentation/admin-guide/media/cx18-cardlist.rst b/Documentation/admin-guide/media/cx18-cardlist.rst
new file mode 100644
index 000000000000..26f2da9aa542
--- /dev/null
+++ b/Documentation/admin-guide/media/cx18-cardlist.rst
@@ -0,0 +1,17 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+CX18 cards list
+===============
+
+Those cards are supported by cx18 driver:
+
+- Hauppauge HVR-1600 (ESMT memory)
+- Hauppauge HVR-1600 (Samsung memory)
+- Compro VideoMate H900
+- Yuan MPC718 MiniPCI DVB-T/Analog
+- Conexant Raptor PAL/SECAM
+- Toshiba Qosmio DVB-T/Analog
+- Leadtek WinFast PVR2100
+- Leadtek WinFast DVR3100
+- GoTView PCI DVD3 Hybrid
+- Hauppauge HVR-1600 (s5h1411/tda18271)
diff --git a/Documentation/admin-guide/media/cx231xx-cardlist.rst b/Documentation/admin-guide/media/cx231xx-cardlist.rst
new file mode 100644
index 000000000000..d374101be047
--- /dev/null
+++ b/Documentation/admin-guide/media/cx231xx-cardlist.rst
@@ -0,0 +1,99 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+cx231xx cards list
+==================
+
+.. tabularcolumns:: |p{1.4cm}|p{10.0cm}|p{6.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 12 19
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - USB IDs
+   * - 0
+     - Unknown CX231xx video grabber
+     - 0572:5A3C
+   * - 1
+     - Conexant Hybrid TV - CARRAERA
+     - 0572:58A2
+   * - 2
+     - Conexant Hybrid TV - SHELBY
+     - 0572:58A1
+   * - 3
+     - Conexant Hybrid TV - RDE253S
+     - 0572:58A4
+   * - 4
+     - Conexant Hybrid TV - RDU253S
+     - 0572:58A5
+   * - 5
+     - Conexant VIDEO GRABBER
+     - 0572:58A6, 07ca:c039
+   * - 6
+     - Conexant Hybrid TV - rde 250
+     - 0572:589E
+   * - 7
+     - Conexant Hybrid TV - RDU 250
+     - 0572:58A0
+   * - 8
+     - Hauppauge EXETER
+     - 2040:b120, 2040:b140
+   * - 9
+     - Hauppauge USB Live 2
+     - 2040:c200
+   * - 10
+     - Pixelview PlayTV USB Hybrid
+     - 4000:4001
+   * - 11
+     - Pixelview Xcapture USB
+     - 1D19:6109, 4000:4001
+   * - 12
+     - Kworld UB430 USB Hybrid
+     - 1b80:e424
+   * - 13
+     - Iconbit Analog Stick U100 FM
+     - 1f4d:0237
+   * - 14
+     - Hauppauge WinTV USB2 FM (PAL)
+     - 2040:b110
+   * - 15
+     - Hauppauge WinTV USB2 FM (NTSC)
+     - 2040:b111
+   * - 16
+     - Elgato Video Capture V2
+     - 0fd9:0037
+   * - 17
+     - Geniatech OTG102
+     - 1f4d:0102
+   * - 18
+     - Kworld UB445 USB Hybrid
+     - 1b80:e421
+   * - 19
+     - Hauppauge WinTV 930C-HD (1113xx) / HVR-900H (111xxx) / PCTV QuatroStick 521e
+     - 2040:b130, 2040:b138, 2013:0259
+   * - 20
+     - Hauppauge WinTV 930C-HD (1114xx) / HVR-901H (1114xx) / PCTV QuatroStick 522e
+     - 2040:b131, 2040:b139, 2013:025e
+   * - 21
+     - Hauppauge WinTV-HVR-955Q (111401)
+     - 2040:b123, 2040:b124
+   * - 22
+     - Terratec Grabby
+     - 1f4d:0102
+   * - 23
+     - Evromedia USB Full Hybrid Full HD
+     - 1b80:d3b2
+   * - 24
+     - Astrometa T2hybrid
+     - 15f4:0135
+   * - 25
+     - The Imaging Source DFG/USB2pro
+     - 199e:8002
+   * - 26
+     - Hauppauge WinTV-HVR-935C
+     - 2040:b151
+   * - 27
+     - Hauppauge WinTV-HVR-975
+     - 2040:b150
diff --git a/Documentation/admin-guide/media/cx23885-cardlist.rst b/Documentation/admin-guide/media/cx23885-cardlist.rst
new file mode 100644
index 000000000000..0415b8e0be6f
--- /dev/null
+++ b/Documentation/admin-guide/media/cx23885-cardlist.rst
@@ -0,0 +1,267 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+cx23885 cards list
+==================
+
+.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - PCI IDs
+
+   * - 0
+     - UNKNOWN/GENERIC
+     - 0070:3400
+
+   * - 1
+     - Hauppauge WinTV-HVR1800lp
+     - 0070:7600
+
+   * - 2
+     - Hauppauge WinTV-HVR1800
+     - 0070:7800, 0070:7801, 0070:7809
+
+   * - 3
+     - Hauppauge WinTV-HVR1250
+     - 0070:7911
+
+   * - 4
+     - DViCO FusionHDTV5 Express
+     - 18ac:d500
+
+   * - 5
+     - Hauppauge WinTV-HVR1500Q
+     - 0070:7790, 0070:7797
+
+   * - 6
+     - Hauppauge WinTV-HVR1500
+     - 0070:7710, 0070:7717
+
+   * - 7
+     - Hauppauge WinTV-HVR1200
+     - 0070:71d1, 0070:71d3
+
+   * - 8
+     - Hauppauge WinTV-HVR1700
+     - 0070:8101
+
+   * - 9
+     - Hauppauge WinTV-HVR1400
+     - 0070:8010
+
+   * - 10
+     - DViCO FusionHDTV7 Dual Express
+     - 18ac:d618
+
+   * - 11
+     - DViCO FusionHDTV DVB-T Dual Express
+     - 18ac:db78
+
+   * - 12
+     - Leadtek Winfast PxDVR3200 H
+     - 107d:6681
+
+   * - 13
+     - Compro VideoMate E650F
+     - 185b:e800
+
+   * - 14
+     - TurboSight TBS 6920
+     - 6920:8888
+
+   * - 15
+     - TeVii S470
+     - d470:9022
+
+   * - 16
+     - DVBWorld DVB-S2 2005
+     - 0001:2005
+
+   * - 17
+     - NetUP Dual DVB-S2 CI
+     - 1b55:2a2c
+
+   * - 18
+     - Hauppauge WinTV-HVR1270
+     - 0070:2211
+
+   * - 19
+     - Hauppauge WinTV-HVR1275
+     - 0070:2215, 0070:221d, 0070:22f2
+
+   * - 20
+     - Hauppauge WinTV-HVR1255
+     - 0070:2251, 0070:22f1
+
+   * - 21
+     - Hauppauge WinTV-HVR1210
+     - 0070:2291, 0070:2295, 0070:2299, 0070:229d, 0070:22f0, 0070:22f3, 0070:22f4, 0070:22f5
+
+   * - 22
+     - Mygica X8506 DMB-TH
+     - 14f1:8651
+
+   * - 23
+     - Magic-Pro ProHDTV Extreme 2
+     - 14f1:8657
+
+   * - 24
+     - Hauppauge WinTV-HVR1850
+     - 0070:8541
+
+   * - 25
+     - Compro VideoMate E800
+     - 1858:e800
+
+   * - 26
+     - Hauppauge WinTV-HVR1290
+     - 0070:8551
+
+   * - 27
+     - Mygica X8558 PRO DMB-TH
+     - 14f1:8578
+
+   * - 28
+     - LEADTEK WinFast PxTV1200
+     - 107d:6f22
+
+   * - 29
+     - GoTView X5 3D Hybrid
+     - 5654:2390
+
+   * - 30
+     - NetUP Dual DVB-T/C-CI RF
+     - 1b55:e2e4
+
+   * - 31
+     - Leadtek Winfast PxDVR3200 H XC4000
+     - 107d:6f39
+
+   * - 32
+     - MPX-885
+     -
+
+   * - 33
+     - Mygica X8502/X8507 ISDB-T
+     - 14f1:8502
+
+   * - 34
+     - TerraTec Cinergy T PCIe Dual
+     - 153b:117e
+
+   * - 35
+     - TeVii S471
+     - d471:9022
+
+   * - 36
+     - Hauppauge WinTV-HVR1255
+     - 0070:2259
+
+   * - 37
+     - Prof Revolution DVB-S2 8000
+     - 8000:3034
+
+   * - 38
+     - Hauppauge WinTV-HVR4400/HVR5500
+     - 0070:c108, 0070:c138, 0070:c1f8
+
+   * - 39
+     - AVerTV Hybrid Express Slim HC81R
+     - 1461:d939
+
+   * - 40
+     - TurboSight TBS 6981
+     - 6981:8888
+
+   * - 41
+     - TurboSight TBS 6980
+     - 6980:8888
+
+   * - 42
+     - Leadtek Winfast PxPVR2200
+     - 107d:6f21
+
+   * - 43
+     - Hauppauge ImpactVCB-e
+     - 0070:7133, 0070:7137
+
+   * - 44
+     - DViCO FusionHDTV DVB-T Dual Express2
+     - 18ac:db98
+
+   * - 45
+     - DVBSky T9580
+     - 4254:9580
+
+   * - 46
+     - DVBSky T980C
+     - 4254:980c
+
+   * - 47
+     - DVBSky S950C
+     - 4254:950c
+
+   * - 48
+     - Technotrend TT-budget CT2-4500 CI
+     - 13c2:3013
+
+   * - 49
+     - DVBSky S950
+     - 4254:0950
+
+   * - 50
+     - DVBSky S952
+     - 4254:0952
+
+   * - 51
+     - DVBSky T982
+     - 4254:0982
+
+   * - 52
+     - Hauppauge WinTV-HVR5525
+     - 0070:f038
+
+   * - 53
+     - Hauppauge WinTV Starburst
+     - 0070:c12a
+
+   * - 54
+     - ViewCast 260e
+     - 1576:0260
+
+   * - 55
+     - ViewCast 460e
+     - 1576:0460
+
+   * - 56
+     - Hauppauge WinTV-QuadHD-DVB
+     - 0070:6a28, 0070:6b28
+
+   * - 57
+     - Hauppauge WinTV-QuadHD-ATSC
+     - 0070:6a18, 0070:6b18
+
+   * - 58
+     - Hauppauge WinTV-HVR-1265(161111)
+     - 0070:2a18
+
+   * - 59
+     - Hauppauge WinTV-Starburst2
+     - 0070:f02a
+
+   * - 60
+     - Hauppauge WinTV-QuadHD-DVB(885)
+     -
+
+   * - 61
+     - Hauppauge WinTV-QuadHD-ATSC(885)
+     -
+
+   * - 62
+     - AVerMedia CE310B
+     - 1461:3100
diff --git a/Documentation/admin-guide/media/cx88-cardlist.rst b/Documentation/admin-guide/media/cx88-cardlist.rst
new file mode 100644
index 000000000000..4524dfb13d18
--- /dev/null
+++ b/Documentation/admin-guide/media/cx88-cardlist.rst
@@ -0,0 +1,383 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+CX88 cards list
+===============
+
+.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - PCI IDs
+
+   * - 0
+     - UNKNOWN/GENERIC
+     -
+
+   * - 1
+     - Hauppauge WinTV 34xxx models
+     - 0070:3400, 0070:3401
+
+   * - 2
+     - GDI Black Gold
+     - 14c7:0106, 14c7:0107
+
+   * - 3
+     - PixelView
+     - 1554:4811
+
+   * - 4
+     - ATI TV Wonder Pro
+     - 1002:00f8, 1002:00f9
+
+   * - 5
+     - Leadtek Winfast 2000XP Expert
+     - 107d:6611, 107d:6613
+
+   * - 6
+     - AverTV Studio 303 (M126)
+     - 1461:000b
+
+   * - 7
+     - MSI TV-@nywhere Master
+     - 1462:8606
+
+   * - 8
+     - Leadtek Winfast DV2000
+     - 107d:6620, 107d:6621
+
+   * - 9
+     - Leadtek PVR 2000
+     - 107d:663b, 107d:663c, 107d:6632, 107d:6630, 107d:6638, 107d:6631, 107d:6637, 107d:663d
+
+   * - 10
+     - IODATA GV-VCP3/PCI
+     - 10fc:d003
+
+   * - 11
+     - Prolink PlayTV PVR
+     -
+
+   * - 12
+     - ASUS PVR-416
+     - 1043:4823, 1461:c111
+
+   * - 13
+     - MSI TV-@nywhere
+     -
+
+   * - 14
+     - KWorld/VStream XPert DVB-T
+     - 17de:08a6
+
+   * - 15
+     - DViCO FusionHDTV DVB-T1
+     - 18ac:db00
+
+   * - 16
+     - KWorld LTV883RF
+     -
+
+   * - 17
+     - DViCO FusionHDTV 3 Gold-Q
+     - 18ac:d810, 18ac:d800
+
+   * - 18
+     - Hauppauge Nova-T DVB-T
+     - 0070:9002, 0070:9001, 0070:9000
+
+   * - 19
+     - Conexant DVB-T reference design
+     - 14f1:0187
+
+   * - 20
+     - Provideo PV259
+     - 1540:2580
+
+   * - 21
+     - DViCO FusionHDTV DVB-T Plus
+     - 18ac:db10, 18ac:db11
+
+   * - 22
+     - pcHDTV HD3000 HDTV
+     - 7063:3000
+
+   * - 23
+     - digitalnow DNTV Live! DVB-T
+     - 17de:a8a6
+
+   * - 24
+     - Hauppauge WinTV 28xxx (Roslyn) models
+     - 0070:2801
+
+   * - 25
+     - Digital-Logic MICROSPACE Entertainment Center (MEC)
+     - 14f1:0342
+
+   * - 26
+     - IODATA GV/BCTV7E
+     - 10fc:d035
+
+   * - 27
+     - PixelView PlayTV Ultra Pro (Stereo)
+     -
+
+   * - 28
+     - DViCO FusionHDTV 3 Gold-T
+     - 18ac:d820
+
+   * - 29
+     - ADS Tech Instant TV DVB-T PCI
+     - 1421:0334
+
+   * - 30
+     - TerraTec Cinergy 1400 DVB-T
+     - 153b:1166
+
+   * - 31
+     - DViCO FusionHDTV 5 Gold
+     - 18ac:d500
+
+   * - 32
+     - AverMedia UltraTV Media Center PCI 550
+     - 1461:8011
+
+   * - 33
+     - Kworld V-Stream Xpert DVD
+     -
+
+   * - 34
+     - ATI HDTV Wonder
+     - 1002:a101
+
+   * - 35
+     - WinFast DTV1000-T
+     - 107d:665f
+
+   * - 36
+     - AVerTV 303 (M126)
+     - 1461:000a
+
+   * - 37
+     - Hauppauge Nova-S-Plus DVB-S
+     - 0070:9201, 0070:9202
+
+   * - 38
+     - Hauppauge Nova-SE2 DVB-S
+     - 0070:9200
+
+   * - 39
+     - KWorld DVB-S 100
+     - 17de:08b2, 1421:0341
+
+   * - 40
+     - Hauppauge WinTV-HVR1100 DVB-T/Hybrid
+     - 0070:9400, 0070:9402
+
+   * - 41
+     - Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
+     - 0070:9800, 0070:9802
+
+   * - 42
+     - digitalnow DNTV Live! DVB-T Pro
+     - 1822:0025, 1822:0019
+
+   * - 43
+     - KWorld/VStream XPert DVB-T with cx22702
+     - 17de:08a1, 12ab:2300
+
+   * - 44
+     - DViCO FusionHDTV DVB-T Dual Digital
+     - 18ac:db50, 18ac:db54
+
+   * - 45
+     - KWorld HardwareMpegTV XPert
+     - 17de:0840, 1421:0305
+
+   * - 46
+     - DViCO FusionHDTV DVB-T Hybrid
+     - 18ac:db40, 18ac:db44
+
+   * - 47
+     - pcHDTV HD5500 HDTV
+     - 7063:5500
+
+   * - 48
+     - Kworld MCE 200 Deluxe
+     - 17de:0841
+
+   * - 49
+     - PixelView PlayTV P7000
+     - 1554:4813
+
+   * - 50
+     - NPG Tech Real TV FM Top 10
+     - 14f1:0842
+
+   * - 51
+     - WinFast DTV2000 H
+     - 107d:665e
+
+   * - 52
+     - Geniatech DVB-S
+     - 14f1:0084
+
+   * - 53
+     - Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
+     - 0070:1404, 0070:1400, 0070:1401, 0070:1402
+
+   * - 54
+     - Norwood Micro TV Tuner
+     -
+
+   * - 55
+     - Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
+     - c180:c980
+
+   * - 56
+     - Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
+     - 0070:9600, 0070:9601, 0070:9602
+
+   * - 57
+     - ADS Tech Instant Video PCI
+     - 1421:0390
+
+   * - 58
+     - Pinnacle PCTV HD 800i
+     - 11bd:0051
+
+   * - 59
+     - DViCO FusionHDTV 5 PCI nano
+     - 18ac:d530
+
+   * - 60
+     - Pinnacle Hybrid PCTV
+     - 12ab:1788
+
+   * - 61
+     - Leadtek TV2000 XP Global
+     - 107d:6f18, 107d:6618, 107d:6619
+
+   * - 62
+     - PowerColor RA330
+     - 14f1:ea3d
+
+   * - 63
+     - Geniatech X8000-MT DVBT
+     - 14f1:8852
+
+   * - 64
+     - DViCO FusionHDTV DVB-T PRO
+     - 18ac:db30
+
+   * - 65
+     - DViCO FusionHDTV 7 Gold
+     - 18ac:d610
+
+   * - 66
+     - Prolink Pixelview MPEG 8000GT
+     - 1554:4935
+
+   * - 67
+     - Kworld PlusTV HD PCI 120 (ATSC 120)
+     - 17de:08c1
+
+   * - 68
+     - Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid
+     - 0070:6900, 0070:6904, 0070:6902
+
+   * - 69
+     - Hauppauge WinTV-HVR4000(Lite) DVB-S/S2
+     - 0070:6905, 0070:6906
+
+   * - 70
+     - TeVii S460 DVB-S/S2
+     - d460:9022
+
+   * - 71
+     - Omicom SS4 DVB-S/S2 PCI
+     - A044:2011
+
+   * - 72
+     - TBS 8920 DVB-S/S2
+     - 8920:8888
+
+   * - 73
+     - TeVii S420 DVB-S
+     - d420:9022
+
+   * - 74
+     - Prolink Pixelview Global Extreme
+     - 1554:4976
+
+   * - 75
+     - PROF 7300 DVB-S/S2
+     - B033:3033
+
+   * - 76
+     - SATTRADE ST4200 DVB-S/S2
+     - b200:4200
+
+   * - 77
+     - TBS 8910 DVB-S
+     - 8910:8888
+
+   * - 78
+     - Prof 6200 DVB-S
+     - b022:3022
+
+   * - 79
+     - Terratec Cinergy HT PCI MKII
+     - 153b:1177
+
+   * - 80
+     - Hauppauge WinTV-IR Only
+     - 0070:9290
+
+   * - 81
+     - Leadtek WinFast DTV1800 Hybrid
+     - 107d:6654
+
+   * - 82
+     - WinFast DTV2000 H rev. J
+     - 107d:6f2b
+
+   * - 83
+     - Prof 7301 DVB-S/S2
+     - b034:3034
+
+   * - 84
+     - Samsung SMT 7020 DVB-S
+     - 18ac:dc00, 18ac:dccd
+
+   * - 85
+     - Twinhan VP-1027 DVB-S
+     - 1822:0023
+
+   * - 86
+     - TeVii S464 DVB-S/S2
+     - d464:9022
+
+   * - 87
+     - Leadtek WinFast DTV2000 H PLUS
+     - 107d:6f42
+
+   * - 88
+     - Leadtek WinFast DTV1800 H (XC4000)
+     - 107d:6f38
+
+   * - 89
+     - Leadtek TV2000 XP Global (SC4100)
+     - 107d:6f36
+
+   * - 90
+     - Leadtek TV2000 XP Global (XC4100)
+     - 107d:6f43
+
+   * - 91
+     - NotOnlyTV LV3H
+     -
diff --git a/Documentation/admin-guide/media/cx88.rst b/Documentation/admin-guide/media/cx88.rst
new file mode 100644
index 000000000000..e4badb18199d
--- /dev/null
+++ b/Documentation/admin-guide/media/cx88.rst
@@ -0,0 +1,58 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The cx88 driver
+===============
+
+Author:  Gerd Hoffmann
+
+This is a v4l2 device driver for the cx2388x chip.
+
+
+Current status
+--------------
+
+video
+	- Works.
+	- Overlay isn't supported.
+
+audio
+	- Works. The TV standard detection is made by the driver, as the
+	  hardware has bugs to auto-detect.
+	- audio data dma (i.e. recording without loopback cable to the
+	  sound card) is supported via cx88-alsa.
+
+vbi
+	- Works.
+
+
+How to add support for new cards
+--------------------------------
+
+The driver needs some config info for the TV cards.  This stuff is in
+cx88-cards.c.  If the driver doesn't work well you likely need a new
+entry for your card in that file.  Check the kernel log (using dmesg)
+to see whenever the driver knows your card or not.  There is a line
+like this one:
+
+.. code-block:: none
+
+	cx8800[0]: subsystem: 0070:3400, board: Hauppauge WinTV \
+		34xxx models [card=1,autodetected]
+
+If your card is listed as "board: UNKNOWN/GENERIC" it is unknown to
+the driver.  What to do then?
+
+1) Try upgrading to the latest snapshot, maybe it has been added
+   meanwhile.
+2) You can try to create a new entry yourself, have a look at
+   cx88-cards.c.  If that worked, mail me your changes as unified
+   diff ("diff -u").
+3) Or you can mail me the config information.  We need at least the
+   following information to add the card:
+
+     - the PCI Subsystem ID ("0070:3400" from the line above,
+       "lspci -v" output is fine too).
+     - the tuner type used by the card.  You can try to find one by
+       trial-and-error using the tuner=<n> insmod option.  If you
+       know which one the card has you can also have a look at the
+       list in CARDLIST.tuner
diff --git a/Documentation/admin-guide/media/davinci-vpbe.rst b/Documentation/admin-guide/media/davinci-vpbe.rst
new file mode 100644
index 000000000000..9e6360fd02db
--- /dev/null
+++ b/Documentation/admin-guide/media/davinci-vpbe.rst
@@ -0,0 +1,65 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The VPBE V4L2 driver design
+===========================
+
+Functional partitioning
+-----------------------
+
+Consists of the following:
+
+ 1. V4L2 display driver
+
+    Implements creation of video2 and video3 device nodes and
+    provides v4l2 device interface to manage VID0 and VID1 layers.
+
+ 2. Display controller
+
+    Loads up VENC, OSD and external encoders such as ths8200. It provides
+    a set of API calls to V4L2 drivers to set the output/standards
+    in the VENC or external sub devices. It also provides
+    a device object to access the services from OSD subdevice
+    using sub device ops. The connection of external encoders to VENC LCD
+    controller port is done at init time based on default output and standard
+    selection or at run time when application change the output through
+    V4L2 IOCTLs.
+
+    When connected to an external encoder, vpbe controller is also responsible
+    for setting up the interface between VENC and external encoders based on
+    board specific settings (specified in board-xxx-evm.c). This allows
+    interfacing external encoders such as ths8200. The setup_if_config()
+    is implemented for this as well as configure_venc() (part of the next patch)
+    API to set timings in VENC for a specific display resolution. As of this
+    patch series, the interconnection and enabling and setting of the external
+    encoders is not present, and would be a part of the next patch series.
+
+ 3. VENC subdevice module
+
+    Responsible for setting outputs provided through internal DACs and also
+    setting timings at LCD controller port when external encoders are connected
+    at the port or LCD panel timings required. When external encoder/LCD panel
+    is connected, the timings for a specific standard/preset is retrieved from
+    the board specific table and the values are used to set the timings in
+    venc using non-standard timing mode.
+
+    Support LCD Panel displays using the VENC. For example to support a Logic
+    PD display, it requires setting up the LCD controller port with a set of
+    timings for the resolution supported and setting the dot clock. So we could
+    add the available outputs as a board specific entry (i.e add the "LogicPD"
+    output name to board-xxx-evm.c). A table of timings for various LCDs
+    supported can be maintained in the board specific setup file to support
+    various LCD displays.As of this patch a basic driver is present, and this
+    support for external encoders and displays forms a part of the next
+    patch series.
+
+ 4. OSD module
+
+    OSD module implements all OSD layer management and hardware specific
+    features. The VPBE module interacts with the OSD for enabling and
+    disabling appropriate features of the OSD.
+
+Current status
+--------------
+
+A fully functional working version of the V4L2 driver is available. This
+driver has been tested with NTSC and PAL standards and buffer streaming.
diff --git a/Documentation/admin-guide/media/dvb-drivers.rst b/Documentation/admin-guide/media/dvb-drivers.rst
new file mode 100644
index 000000000000..8df637c375f9
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-drivers.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================================
+Digital TV driver-specific documentation
+========================================
+
+.. toctree::
+	:maxdepth: 2
+
+	avermedia
+	bt8xx
+	lmedm04
+	opera-firmware
+	technisat
+	ttusb-dec
+	zr364xx
diff --git a/Documentation/admin-guide/media/dvb-usb-a800-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-a800-cardlist.rst
new file mode 100644
index 000000000000..2ec8bb8230ff
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-a800-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-a800 cards list
+=======================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - AVerMedia AverTV DVB-T USB 2.0 (A800)
+     - 07ca:a800, 07ca:a801
diff --git a/Documentation/admin-guide/media/dvb-usb-af9005-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-af9005-cardlist.rst
new file mode 100644
index 000000000000..285160ee82e8
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-af9005-cardlist.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-af9005 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Afatech DVB-T USB1.1 stick
+     - 15a4:9020
+   * - Ansonic DVB-T USB1.1 stick
+     - 10b9:6000
+   * - TerraTec Cinergy T USB XE
+     - 0ccd:0055
diff --git a/Documentation/admin-guide/media/dvb-usb-af9015-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-af9015-cardlist.rst
new file mode 100644
index 000000000000..c557994f796a
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-af9015-cardlist.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-af9015 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - AVerMedia A309
+     - 07ca:a309
+   * - AVerMedia AVerTV DVB-T Volar X
+     - 07ca:a815
+   * - Afatech AF9015 reference design
+     - 15a4:9015, 15a4:9016
+   * - AverMedia AVerTV Red HD+ (A850T)
+     - 07ca:850b
+   * - AverMedia AVerTV Volar Black HD (A850)
+     - 07ca:850a
+   * - AverMedia AVerTV Volar GPS 805 (A805)
+     - 07ca:a805
+   * - AverMedia AVerTV Volar M (A815Mac)
+     - 07ca:815a
+   * - Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0
+     - 1b80:e397
+   * - DigitalNow TinyTwin
+     - 13d3:3226
+   * - DigitalNow TinyTwin v2
+     - 1b80:e402
+   * - DigitalNow TinyTwin v3
+     - 1f4d:9016
+   * - Fujitsu-Siemens Slim Mobile USB DVB-T
+     - 07ca:8150
+   * - Genius TVGo DVB-T03
+     - 0458:4012
+   * - KWorld Digital MC-810
+     - 1b80:c810
+   * - KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)
+     - 1b80:c161
+   * - KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)
+     - 1b80:c160
+   * - KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)
+     - 1b80:e399, 1b80:e400
+   * - KWorld USB DVB-T Stick Mobile (UB383-T)
+     - 1b80:e383
+   * - KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)
+     - 1b80:e396, 1b80:e39b, 1b80:e395, 1b80:e39a
+   * - Leadtek WinFast DTV Dongle Gold
+     - 0413:6029
+   * - Leadtek WinFast DTV2000DS
+     - 0413:6a04
+   * - MSI DIGIVOX Duo
+     - 1462:8801
+   * - MSI Digi VOX mini III
+     - 1462:8807
+   * - Pinnacle PCTV 71e
+     - 2304:022b
+   * - Sveon STV20 Tuner USB DVB-T HDTV
+     - 1b80:e39d
+   * - Sveon STV22 Dual USB DVB-T Tuner HDTV
+     - 1b80:e401
+   * - Telestar Starstick 2
+     - 10b9:8000
+   * - TerraTec Cinergy T Stick Dual RC
+     - 0ccd:0099
+   * - TerraTec Cinergy T Stick RC
+     - 0ccd:0097
+   * - TerraTec Cinergy T USB XE
+     - 0ccd:0069
+   * - TrekStor DVB-T USB Stick
+     - 15a4:901b
+   * - TwinHan AzureWave AD-TU700(704J)
+     - 13d3:3237
+   * - Xtensions XD-380
+     - 1ae7:0381
diff --git a/Documentation/admin-guide/media/dvb-usb-af9035-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-af9035-cardlist.rst
new file mode 100644
index 000000000000..63e4170777c4
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-af9035-cardlist.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-af9035 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - AVerMedia AVerTV Volar HD/PRO (A835)
+     - 07ca:a835, 07ca:b835
+   * - AVerMedia HD Volar (A867)
+     - 07ca:1867, 07ca:a867, 07ca:0337
+   * - AVerMedia TD310 DVB-T2
+     - 07ca:1871
+   * - AVerMedia Twinstar (A825)
+     - 07ca:0825
+   * - Afatech AF9035 reference design
+     - 15a4:9035, 15a4:1000, 15a4:1001, 15a4:1002, 15a4:1003
+   * - Asus U3100Mini Plus
+     - 0b05:1779
+   * - Avermedia A835B(1835)
+     - 07ca:1835
+   * - Avermedia A835B(2835)
+     - 07ca:2835
+   * - Avermedia A835B(3835)
+     - 07ca:3835
+   * - Avermedia A835B(4835)
+     - 07ca:4835
+   * - Avermedia AverTV Volar HD 2 (TD110)
+     - 07ca:a110
+   * - Avermedia H335
+     - 07ca:0335
+   * - Digital Dual TV Receiver CTVDIGDUAL_V2
+     - 1b80:e410
+   * - EVOLVEO XtraTV stick
+     - 1f4d:a115
+   * - Hauppauge WinTV-MiniStick 2
+     - 2040:f900
+   * - ITE 9135 Generic
+     - 048d:9135
+   * - ITE 9135(9005) Generic
+     - 048d:9005
+   * - ITE 9135(9006) Generic
+     - 048d:9006
+   * - ITE 9303 Generic
+     - 048d:9306
+   * - Kworld UB499-2T T09
+     - 1b80:e409
+   * - Leadtek WinFast DTV Dongle Dual
+     - 0413:6a05
+   * - Logilink VG0022A
+     - 1d19:0100
+   * - PCTV AndroiDTV (78e)
+     - 2013:025a
+   * - PCTV microStick (79e)
+     - 2013:0262
+   * - Sveon STV22 Dual DVB-T HDTV
+     - 1b80:e411
+   * - TerraTec Cinergy T Stick
+     - 0ccd:0093
+   * - TerraTec Cinergy T Stick (rev. 2)
+     - 0ccd:00aa
+   * - TerraTec Cinergy T Stick Dual RC (rev. 2)
+     - 0ccd:0099
+   * - TerraTec Cinergy TC2 Stick
+     - 0ccd:10b2
+   * - TerraTec T1
+     - 0ccd:10ae
diff --git a/Documentation/admin-guide/media/dvb-usb-anysee-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-anysee-cardlist.rst
new file mode 100644
index 000000000000..1fb5d22a00dc
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-anysee-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-anysee cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Anysee
+     - 04b4:861f, 1c73:861f
diff --git a/Documentation/admin-guide/media/dvb-usb-au6610-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-au6610-cardlist.rst
new file mode 100644
index 000000000000..02b2b742710b
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-au6610-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-au6610 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Sigmatek DVB-110
+     - 058f:6610
diff --git a/Documentation/admin-guide/media/dvb-usb-az6007-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-az6007-cardlist.rst
new file mode 100644
index 000000000000..db27eb47cc8f
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-az6007-cardlist.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-az6007 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Azurewave 6007
+     - 13d3:0ccd
+   * - Technisat CableStar Combo HD CI
+     - 14f7:0003
+   * - Terratec H7
+     - 0ccd:10b4, 0ccd:10a3
diff --git a/Documentation/admin-guide/media/dvb-usb-az6027-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-az6027-cardlist.rst
new file mode 100644
index 000000000000..6d8575e9d90c
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-az6027-cardlist.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-az6027 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)
+     - 13d3:3275
+   * - Elgato EyeTV Sat
+     - 0fd9:002a, 0fd9:0025, 0fd9:0036
+   * - TERRATEC S7
+     - 0ccd:10a4
+   * - TERRATEC S7 MKII
+     - 0ccd:10ac
+   * - Technisat SkyStar USB 2 HD CI
+     - 14f7:0001, 14f7:0002
diff --git a/Documentation/admin-guide/media/dvb-usb-ce6230-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-ce6230-cardlist.rst
new file mode 100644
index 000000000000..09750e8ac139
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-ce6230-cardlist.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-ce6230 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - AVerMedia A310 USB 2.0 DVB-T tuner
+     - 07ca:a310
+   * - Intel CE9500 reference design
+     - 8086:9500
diff --git a/Documentation/admin-guide/media/dvb-usb-cinergyT2-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-cinergyT2-cardlist.rst
new file mode 100644
index 000000000000..0ee753929eca
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-cinergyT2-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-cinergyT2 cards list
+============================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - TerraTec/qanu USB2.0 Highspeed DVB-T Receiver
+     - 0ccd:0x0038
diff --git a/Documentation/admin-guide/media/dvb-usb-cxusb-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-cxusb-cardlist.rst
new file mode 100644
index 000000000000..a73f15d1acf5
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-cxusb-cardlist.rst
@@ -0,0 +1,40 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-cxusb cards list
+========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - AVerMedia AVerTVHD Volar (A868R)
+     -
+   * - Conexant DMB-TH Stick
+     -
+   * - DViCO FusionHDTV DVB-T Dual Digital 2
+     -
+   * - DViCO FusionHDTV DVB-T Dual Digital 4
+     -
+   * - DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)
+     -
+   * - DViCO FusionHDTV DVB-T Dual USB
+     -
+   * - DViCO FusionHDTV DVB-T NANO2
+     -
+   * - DViCO FusionHDTV DVB-T USB (LGZ201)
+     -
+   * - DViCO FusionHDTV DVB-T USB (TH7579)
+     -
+   * - DViCO FusionHDTV5 USB Gold
+     -
+   * - DigitalNow DVB-T Dual USB
+     -
+   * - Medion MD95700 (MDUSBTV-HYBRID)
+     -
+   * - Mygica D689 DMB-TH
+     -
diff --git a/Documentation/admin-guide/media/dvb-usb-dib0700-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dib0700-cardlist.rst
new file mode 100644
index 000000000000..4b76b6f1089b
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-dib0700-cardlist.rst
@@ -0,0 +1,162 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-dib0700 cards list
+==========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - ASUS My Cinema U3000 Mini DVBT Tuner
+     - 0b05:171f
+   * - ASUS My Cinema U3100 Mini DVBT Tuner
+     - 0b05:173f
+   * - AVerMedia AVerTV DVB-T Express
+     - 07ca:b568
+   * - AVerMedia AVerTV DVB-T Volar
+     - 07ca:a807, 07ca:b808
+   * - Artec T14BR DVB-T
+     - 05d8:810f
+   * - Asus My Cinema-U3000Hybrid
+     - 0b05:1736
+   * - Compro Videomate U500
+     - 185b:1e78, 185b:1e80
+   * - DiBcom NIM7090 reference design
+     - 10b8:1bb2
+   * - DiBcom NIM8096MD reference design
+     - 10b8:1fa8
+   * - DiBcom NIM9090MD reference design
+     - 10b8:2384
+   * - DiBcom STK7070P reference design
+     - 10b8:1ebc
+   * - DiBcom STK7070PD reference design
+     - 10b8:1ebe
+   * - DiBcom STK7700D reference design
+     - 10b8:1ef0
+   * - DiBcom STK7700P reference design
+     - 10b8:1e14, 10b8:1e78
+   * - DiBcom STK7770P reference design
+     - 10b8:1e80
+   * - DiBcom STK807xP reference design
+     - 10b8:1f90
+   * - DiBcom STK807xPVR reference design
+     - 10b8:1f98
+   * - DiBcom STK8096-PVR reference design
+     - 2013:1faa, 10b8:1faa
+   * - DiBcom STK8096GP reference design
+     - 10b8:1fa0
+   * - DiBcom STK9090M reference design
+     - 10b8:2383
+   * - DiBcom TFE7090PVR reference design
+     - 10b8:1bb4
+   * - DiBcom TFE7790P reference design
+     - 10b8:1e6e
+   * - DiBcom TFE8096P reference design
+     - 10b8:1f9C
+   * - Elgato EyeTV DTT
+     - 0fd9:0021
+   * - Elgato EyeTV DTT rev. 2
+     - 0fd9:003f
+   * - Elgato EyeTV Diversity
+     - 0fd9:0011
+   * - Elgato EyeTV Dtt Dlx PD378S
+     - 0fd9:0020
+   * - EvolutePC TVWay+
+     - 1e59:0002
+   * - Gigabyte U7000
+     - 1044:7001
+   * - Gigabyte U8000-RH
+     - 1044:7002
+   * - Hama DVB=T Hybrid USB Stick
+     - 147f:2758
+   * - Hauppauge ATSC MiniCard (B200)
+     - 2040:b200
+   * - Hauppauge ATSC MiniCard (B210)
+     - 2040:b210
+   * - Hauppauge Nova-T 500 Dual DVB-T
+     - 2040:9941, 2040:9950
+   * - Hauppauge Nova-T MyTV.t
+     - 2040:7080
+   * - Hauppauge Nova-T Stick
+     - 2040:7050, 2040:7060, 2040:7070
+   * - Hauppauge Nova-TD Stick (52009)
+     - 2040:5200
+   * - Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity
+     - 2040:9580
+   * - Hauppauge Nova-TD-500 (84xxx)
+     - 2040:8400
+   * - Leadtek WinFast DTV Dongle H
+     - 0413:60f6
+   * - Leadtek Winfast DTV Dongle (STK7700P based)
+     - 0413:6f00, 0413:6f01
+   * - Medion CTX1921 DVB-T USB
+     - 1660:1921
+   * - Microsoft Xbox One Digital TV Tuner
+     - 045e:02d5
+   * - PCTV 2002e
+     - 2013:025c
+   * - PCTV 2002e SE
+     - 2013:025d
+   * - Pinnacle Expresscard 320cx
+     - 2304:022e
+   * - Pinnacle PCTV 2000e
+     - 2304:022c
+   * - Pinnacle PCTV 282e
+     - 2013:0248, 2304:0248
+   * - Pinnacle PCTV 340e HD Pro USB Stick
+     - 2304:023d
+   * - Pinnacle PCTV 72e
+     - 2304:0236
+   * - Pinnacle PCTV 73A
+     - 2304:0243
+   * - Pinnacle PCTV 73e
+     - 2304:0237
+   * - Pinnacle PCTV 73e SE
+     - 2013:0245, 2304:0245
+   * - Pinnacle PCTV DVB-T Flash Stick
+     - 2304:0228
+   * - Pinnacle PCTV Dual DVB-T Diversity Stick
+     - 2304:0229
+   * - Pinnacle PCTV HD Pro USB Stick
+     - 2304:023a
+   * - Pinnacle PCTV HD USB Stick
+     - 2304:023b
+   * - Pinnacle PCTV Hybrid Stick Solo
+     - 2304:023e
+   * - Prolink Pixelview SBTVD
+     - 1554:5010
+   * - Sony PlayTV
+     - 1415:0003
+   * - TechniSat AirStar TeleStick 2
+     - 14f7:0004
+   * - Terratec Cinergy DT USB XS Diversity/ T5
+     - 0ccd:0081, 0ccd:10a1
+   * - Terratec Cinergy DT XS Diversity
+     - 0ccd:005a
+   * - Terratec Cinergy HT Express
+     - 0ccd:0060
+   * - Terratec Cinergy HT USB XE
+     - 0ccd:0058
+   * - Terratec Cinergy T Express
+     - 0ccd:0062
+   * - Terratec Cinergy T USB XXS (HD)/ T3
+     - 0ccd:0078, 0ccd:10a0, 0ccd:00ab
+   * - Uniwill STK7700P based (Hama and others)
+     - 1584:6003
+   * - YUAN High-Tech DiBcom STK7700D
+     - 1164:1e8c
+   * - YUAN High-Tech MC770
+     - 1164:0871
+   * - YUAN High-Tech STK7700D
+     - 1164:1efc
+   * - YUAN High-Tech STK7700PH
+     - 1164:1f08
+   * - Yuan EC372S
+     - 1164:1edc
+   * - Yuan PD378S
+     - 1164:2edc
diff --git a/Documentation/admin-guide/media/dvb-usb-dibusb-mb-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dibusb-mb-cardlist.rst
new file mode 100644
index 000000000000..f25a54721f0d
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-dibusb-mb-cardlist.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-dibusb-mb cards list
+============================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - AVerMedia AverTV DVBT USB1.1
+     - 14aa:0001, 14aa:0002
+   * - Artec T1 USB1.1 TVBOX with AN2135
+     - 05d8:8105, 05d8:8106
+   * - Artec T1 USB1.1 TVBOX with AN2235
+     - 05d8:8107, 05d8:8108
+   * - Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)
+     - 0547:2235
+   * - Artec T1 USB2.0
+     - 05d8:8109, 05d8:810a
+   * - Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)
+     - 185b:d000, 145f:010c, 185b:d001
+   * - DiBcom USB1.1 DVB-T reference design (MOD3000)
+     - 10b8:0bb8, 10b8:0bb9
+   * - Grandtec USB1.1 DVB-T
+     - 5032:0fa0, 5032:0bb8, 5032:0fa1, 5032:0bb9
+   * - KWorld V-Stream XPERT DTV - DVB-T USB1.1
+     - eb1a:17de, eb1a:17df
+   * - KWorld Xpert DVB-T USB2.0
+     - eb2a:17de
+   * - KWorld/ADSTech Instant DVB-T USB2.0
+     - 06e1:a333, 06e1:a334
+   * - TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device
+     - 13d3:3201, 1822:3201, 13d3:3202, 1822:3202
+   * - Unknown USB1.1 DVB-T device ???? please report the name to the author
+     - 1025:005e, 1025:005f
+   * - VideoWalker DVB-T USB
+     - 0458:701e, 0458:701f
diff --git a/Documentation/admin-guide/media/dvb-usb-dibusb-mc-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dibusb-mc-cardlist.rst
new file mode 100644
index 000000000000..8d03bae0e084
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-dibusb-mc-cardlist.rst
@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-dibusb-mc cards list
+============================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Artec T1 USB2.0 TVBOX (please check the warm ID)
+     - 05d8:8109, 05d8:810a
+   * - Artec T14 - USB2.0 DVB-T
+     - 05d8:810b, 05d8:810c
+   * - DiBcom USB2.0 DVB-T reference design (MOD3000P)
+     - 10b8:0bc6, 10b8:0bc7
+   * - GRAND - USB2.0 DVB-T adapter
+     - 5032:0bc6, 5032:0bc7
+   * - Humax/Coex DVB-T USB Stick 2.0 High Speed
+     - 10b9:5000, 10b9:5001
+   * - LITE-ON USB2.0 DVB-T Tuner
+     - 04ca:f000, 04ca:f001
+   * - Leadtek - USB2.0 Winfast DTV dongle
+     - 0413:6025, 0413:6026
+   * - MSI Digivox Mini SL
+     - eb1a:e360, eb1a:e361
diff --git a/Documentation/admin-guide/media/dvb-usb-digitv-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-digitv-cardlist.rst
new file mode 100644
index 000000000000..2b4d8325e8e9
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-digitv-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-digitv cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Nebula Electronics uDigiTV DVB-T USB2.0)
+     - 0547:0201
diff --git a/Documentation/admin-guide/media/dvb-usb-dtt200u-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dtt200u-cardlist.rst
new file mode 100644
index 000000000000..b4150a7bf31f
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-dtt200u-cardlist.rst
@@ -0,0 +1,22 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-dtt200u cards list
+==========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - WideView WT-220U PenType Receiver (Miglia)
+     - 18f3:0220
+   * - WideView WT-220U PenType Receiver (Typhoon/Freecom)
+     - 14aa:0222, 14aa:0220, 14aa:0221, 14aa:0225, 14aa:0226
+   * - WideView WT-220U PenType Receiver (based on ZL353)
+     - 14aa:022a, 14aa:022b
+   * - WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)
+     - 14aa:0201, 14aa:0301
diff --git a/Documentation/admin-guide/media/dvb-usb-dtv5100-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dtv5100-cardlist.rst
new file mode 100644
index 000000000000..91d6e35e6f9d
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-dtv5100-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-dtv5100 cards list
+==========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - AME DTV-5100 USB2.0 DVB-T
+     - 0x06be:0xa232
diff --git a/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst
new file mode 100644
index 000000000000..4fb4ce56df7c
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-dvbsky cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - DVBSky S960/S860
+     - 0572:6831
+   * - DVBSky S960CI
+     - 0572:960c
+   * - DVBSky T330
+     - 0572:0320
+   * - DVBSky T680CI
+     - 0572:680c
+   * - MyGica Mini DVB-T2 USB Stick T230
+     - 0572:c688
+   * - MyGica Mini DVB-T2 USB Stick T230C
+     - 0572:c689
+   * - MyGica Mini DVB-T2 USB Stick T230C Lite
+     - 0572:c699
+   * - MyGica Mini DVB-T2 USB Stick T230C v2
+     - 0572:c68a
+   * - TechnoTrend TT-connect CT2-4650 CI
+     - 0b48:3012
+   * - TechnoTrend TT-connect CT2-4650 CI v1.1
+     - 0b48:3015
+   * - TechnoTrend TT-connect S2-4650 CI
+     - 0b48:3017
+   * - TechnoTrend TVStick CT2-4400
+     - 0b48:3014
+   * - Terratec Cinergy S2 Rev.4
+     - 0ccd:0105
+   * - Terratec H7 Rev.4
+     - 0ccd:10a5
diff --git a/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst
new file mode 100644
index 000000000000..f01f9df1e249
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst
@@ -0,0 +1,52 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-dw2102 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - DVBWorld DVB-C 3101 USB2.0
+     - 04b4:3101
+   * - DVBWorld DVB-S 2101 USB2.0
+     - 04b4:0x2101
+   * - DVBWorld DVB-S 2102 USB2.0
+     - 04b4:2102
+   * - DVBWorld DW2104 USB2.0
+     - 04b4:2104
+   * - GOTVIEW Satellite HD
+     - 0x1FE1:5456
+   * - Geniatech T220 DVB-T/T2 USB2.0
+     - 0x1f4d:0xD220
+   * - SU3000HD DVB-S USB2.0
+     - 0x1f4d:0x3000
+   * - TeVii S482 (tuner 1)
+     - 0x9022:0xd483
+   * - TeVii S482 (tuner 2)
+     - 0x9022:0xd484
+   * - TeVii S630 USB
+     - 0x9022:d630
+   * - TeVii S650 USB2.0
+     - 0x9022:d650
+   * - TeVii S662
+     - 0x9022:d662
+   * - TechnoTrend TT-connect S2-4600
+     - 0b48:3011
+   * - TerraTec Cinergy S USB
+     - 0ccd:0064
+   * - Terratec Cinergy S2 USB BOX
+     - 0ccd:0x0105
+   * - Terratec Cinergy S2 USB HD
+     - 0ccd:00a8
+   * - Terratec Cinergy S2 USB HD Rev.2
+     - 0ccd:00b0
+   * - Terratec Cinergy S2 USB HD Rev.3
+     - 0ccd:0102
+   * - X3M TV SPC1400HD PCI
+     - 0x1f4d:0x3100
diff --git a/Documentation/admin-guide/media/dvb-usb-ec168-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-ec168-cardlist.rst
new file mode 100644
index 000000000000..a3660dfa5dcc
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-ec168-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-ec168 cards list
+========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - E3C EC168 reference design
+     - 18b4:1689, 18b4:fffa, 18b4:fffb, 18b4:1001, 18b4:1002
diff --git a/Documentation/admin-guide/media/dvb-usb-gl861-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-gl861-cardlist.rst
new file mode 100644
index 000000000000..5ec62fe03d64
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-gl861-cardlist.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-gl861 cards list
+========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - 774 Friio White ISDB-T USB2.0
+     - 7a69:0001
+   * - A-LINK DTU DVB-T USB2.0
+     - 05e3:f170
+   * - MSI Mega Sky 55801 DVB-T USB2.0
+     - 0db0:5581
diff --git a/Documentation/admin-guide/media/dvb-usb-gp8psk-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-gp8psk-cardlist.rst
new file mode 100644
index 000000000000..150fa9f7810a
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-gp8psk-cardlist.rst
@@ -0,0 +1,22 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-gp8psk cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver
+     - 09c0:0200, 09c0:0201
+   * - Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver
+     - 09c0:0202
+   * - Genpix SkyWalker-1 DVB-S receiver
+     - 09c0:0203
+   * - Genpix SkyWalker-2 DVB-S receiver
+     - 09c0:0206
diff --git a/Documentation/admin-guide/media/dvb-usb-lmedm04-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-lmedm04-cardlist.rst
new file mode 100644
index 000000000000..2050fbf03d4a
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-lmedm04-cardlist.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-lmedm04 cards list
+==========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - DM04_LME2510C_DVB-S
+     - 3344:1120
+   * - DM04_LME2510C_DVB-S RS2000
+     - 3344:22f0
+   * - DM04_LME2510_DVB-S
+     - 3344:1122
diff --git a/Documentation/admin-guide/media/dvb-usb-m920x-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-m920x-cardlist.rst
new file mode 100644
index 000000000000..73145940b5c5
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-m920x-cardlist.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-m920x cards list
+========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - DTV-DVB UDTT7049
+     - 13d3:3219
+   * - Dposh DVB-T USB2.0
+     - 1498:9206, 1498:a090
+   * - LifeView TV Walker Twin DVB-T USB2.0
+     - 10fd:0514, 10fd:0513
+   * - MSI DIGI VOX mini II DVB-T USB2.0
+     - 10fd:1513
+   * - MSI Mega Sky 580 DVB-T USB2.0
+     - 0db0:5580
+   * - Pinnacle PCTV 310e
+     - 13d3:3211
diff --git a/Documentation/admin-guide/media/dvb-usb-mxl111sf-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-mxl111sf-cardlist.rst
new file mode 100644
index 000000000000..6974801c43b6
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-mxl111sf-cardlist.rst
@@ -0,0 +1,36 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-mxl111sf cards list
+===========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - HCW 117xxx
+     - 2040:b702
+   * - HCW 126xxx
+     - 2040:c602, 2040:c60a
+   * - Hauppauge 117xxx ATSC+
+     - 2040:b700, 2040:b703, 2040:b753, 2040:b763, 2040:b757, 2040:b767
+   * - Hauppauge 117xxx DVBT
+     - 2040:b704, 2040:b764
+   * - Hauppauge 126xxx
+     - 2040:c612, 2040:c61a
+   * - Hauppauge 126xxx ATSC
+     - 2040:c601, 2040:c609, 2040:b701
+   * - Hauppauge 126xxx ATSC+
+     - 2040:c600, 2040:c603, 2040:c60b, 2040:c653, 2040:c65b
+   * - Hauppauge 126xxx DVBT
+     - 2040:c604, 2040:c60c
+   * - Hauppauge 138xxx DVBT
+     - 2040:d854, 2040:d864, 2040:d8d4, 2040:d8e4
+   * - Hauppauge Mercury
+     - 2040:d853, 2040:d863, 2040:d8d3, 2040:d8e3, 2040:d8ff
+   * - Hauppauge WinTV-Aero-M
+     - 2040:c613, 2040:c61b
diff --git a/Documentation/admin-guide/media/dvb-usb-nova-t-usb2-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-nova-t-usb2-cardlist.rst
new file mode 100644
index 000000000000..e295f912a585
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-nova-t-usb2-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-nova-t-usb2 cards list
+==============================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Hauppauge WinTV-NOVA-T usb2
+     - 2040:9300, 2040:9301
diff --git a/Documentation/admin-guide/media/dvb-usb-opera1-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-opera1-cardlist.rst
new file mode 100644
index 000000000000..362245f5a46a
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-opera1-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-opera1 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Opera1 DVB-S USB2.0
+     - 04b4:2830, 695c:3829
diff --git a/Documentation/admin-guide/media/dvb-usb-pctv452e-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-pctv452e-cardlist.rst
new file mode 100644
index 000000000000..886d8cc18acb
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-pctv452e-cardlist.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-pctv452e cards list
+===========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - PCTV HDTV USB
+     - 2304:021f
+   * - Technotrend TT Connect S2-3600
+     - 0b48:3007
+   * - Technotrend TT Connect S2-3650-CI
+     - 0b48:300a
diff --git a/Documentation/admin-guide/media/dvb-usb-rtl28xxu-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-rtl28xxu-cardlist.rst
new file mode 100644
index 000000000000..9f4295331a15
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-rtl28xxu-cardlist.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-rtl28xxu cards list
+===========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - ASUS My Cinema-U3100Mini Plus V2
+     - 1b80:d3a8
+   * - Astrometa DVB-T2
+     - 15f4:0131
+   * - Compro VideoMate U620F
+     - 185b:0620
+   * - Compro VideoMate U650F
+     - 185b:0650
+   * - Crypto ReDi PC 50 A
+     - 1f4d:a803
+   * - Dexatek DK DVB-T Dongle
+     - 1d19:1101
+   * - Dexatek DK mini DVB-T Dongle
+     - 1d19:1102
+   * - DigitalNow Quad DVB-T Receiver
+     - 0413:6680
+   * - Freecom USB2.0 DVB-T
+     - 14aa:0160, 14aa:0161
+   * - G-Tek Electronics Group Lifeview LV5TDLX DVB-T
+     - 1f4d:b803
+   * - GIGABYTE U7300
+     - 1b80:d393
+   * - Genius TVGo DVB-T03
+     - 0458:707f
+   * - GoTView MasterHD 3
+     - 5654:ca42
+   * - Leadtek WinFast DTV Dongle mini
+     - 0413:6a03
+   * - Leadtek WinFast DTV2000DS Plus
+     - 0413:6f12
+   * - Leadtek Winfast DTV Dongle Mini D
+     - 0413:6f0f
+   * - MSI DIGIVOX Micro HD
+     - 1d19:1104
+   * - MaxMedia HU394-T
+     - 1b80:d394
+   * - PROlectrix DV107669
+     - 1f4d:d803
+   * - Peak DVB-T USB
+     - 1b80:d395
+   * - Realtek RTL2831U reference design
+     - 0bda:2831
+   * - Realtek RTL2832U reference design
+     - 0bda:2832, 0bda:2838
+   * - Sveon STV20
+     - 1b80:d39d
+   * - Sveon STV21
+     - 1b80:d3b0
+   * - Sveon STV27
+     - 1b80:d3af
+   * - TURBO-X Pure TV Tuner DTT-2000
+     - 1b80:d3a4
+   * - TerraTec Cinergy T Stick Black
+     - 0ccd:00a9
+   * - TerraTec Cinergy T Stick RC (Rev. 3)
+     - 0ccd:00d3
+   * - TerraTec Cinergy T Stick+
+     - 0ccd:00d7
+   * - TerraTec NOXON DAB Stick
+     - 0ccd:00b3
+   * - TerraTec NOXON DAB Stick (rev 2)
+     - 0ccd:00e0
+   * - TerraTec NOXON DAB Stick (rev 3)
+     - 0ccd:00b4
+   * - Trekstor DVB-T Stick Terres 2.0
+     - 1f4d:C803
diff --git a/Documentation/admin-guide/media/dvb-usb-technisat-usb2-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-technisat-usb2-cardlist.rst
new file mode 100644
index 000000000000..30ee92ada134
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-technisat-usb2-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-technisat-usb2 cards list
+=================================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Technisat SkyStar USB HD (DVB-S/S2)
+     - 14f7:0500
diff --git a/Documentation/admin-guide/media/dvb-usb-ttusb2-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-ttusb2-cardlist.rst
new file mode 100644
index 000000000000..faa78e5f3f5d
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-ttusb2-cardlist.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-ttusb2 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Pinnacle 400e DVB-S USB2.0
+     - 2304:020f
+   * - Pinnacle 450e DVB-S USB2.0
+     - 2304:0222
+   * - Technotrend TT-connect CT-3650
+     - 0b48:300d
+   * - Technotrend TT-connect S-2400
+     - 0b48:3006
+   * - Technotrend TT-connect S-2400 (8kB EEPROM)
+     - 0b48:3009
diff --git a/Documentation/admin-guide/media/dvb-usb-umt-010-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-umt-010-cardlist.rst
new file mode 100644
index 000000000000..ce7ce901b5ac
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-umt-010-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-umt-010 cards list
+==========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Hanftek UMT-010 DVB-T USB2.0
+     - 15f4:0001, 15f4:0015
diff --git a/Documentation/admin-guide/media/dvb-usb-vp702x-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-vp702x-cardlist.rst
new file mode 100644
index 000000000000..101442434268
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-vp702x-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-vp702x cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - TwinhanDTV StarBox DVB-S USB2.0 (VP7021)
+     - 13d3:3207
diff --git a/Documentation/admin-guide/media/dvb-usb-vp7045-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-vp7045-cardlist.rst
new file mode 100644
index 000000000000..2fc8fc4ecc32
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-vp7045-cardlist.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-vp7045 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - DigitalNow TinyUSB 2 DVB-t Receiver
+     - 13d3:3223, 13d3:3224
+   * - Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)
+     - 13d3:3205, 13d3:3206
diff --git a/Documentation/admin-guide/media/dvb-usb-zd1301-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-zd1301-cardlist.rst
new file mode 100644
index 000000000000..9ca446184753
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb-usb-zd1301-cardlist.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+dvb-usb-zd1301 cards list
+=========================
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 7 13
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - ZyDAS ZD1301 reference design
+     - 0ace:13a1
diff --git a/Documentation/admin-guide/media/dvb.rst b/Documentation/admin-guide/media/dvb.rst
new file mode 100644
index 000000000000..e5258bfa5cd9
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========
+Digital TV
+==========
+
+.. toctree::
+
+	dvb_intro
+	ci
+	faq
+	dvb_references
diff --git a/Documentation/admin-guide/media/dvb_intro.rst b/Documentation/admin-guide/media/dvb_intro.rst
new file mode 100644
index 000000000000..44eac9b3be6c
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb_intro.rst
@@ -0,0 +1,616 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+Using the Digital TV Framework
+==============================
+
+Introduction
+~~~~~~~~~~~~
+
+One significant difference between Digital TV and Analogue TV that the
+unwary (like myself) should consider is that, although the component
+structure of DVB-T cards are substantially similar to Analogue TV cards,
+they function in substantially different ways.
+
+The purpose of an Analogue TV is to receive and display an Analogue
+Television signal. An Analogue TV signal (otherwise known as composite
+video) is an analogue encoding of a sequence of image frames (25 frames
+per second in Europe) rasterised using an interlacing technique.
+Interlacing takes two fields to represent one frame. Therefore, an
+Analogue TV card for a PC has the following purpose:
+
+* Tune the receiver to receive a broadcast signal
+* demodulate the broadcast signal
+* demultiplex the analogue video signal and analogue audio
+  signal.
+
+  .. note::
+
+     some countries employ a digital audio signal
+     embedded within the modulated composite analogue signal -
+     using NICAM signaling.)
+
+* digitize the analogue video signal and make the resulting datastream
+  available to the data bus.
+
+The digital datastream from an Analogue TV card is generated by
+circuitry on the card and is often presented uncompressed. For a PAL TV
+signal encoded at a resolution of 768x576 24-bit color pixels over 25
+frames per second - a fair amount of data is generated and must be
+processed by the PC before it can be displayed on the video monitor
+screen. Some Analogue TV cards for PCs have onboard MPEG2 encoders which
+permit the raw digital data stream to be presented to the PC in an
+encoded and compressed form - similar to the form that is used in
+Digital TV.
+
+The purpose of a simple budget digital TV card (DVB-T,C or S) is to
+simply:
+
+* Tune the received to receive a broadcast signal. * Extract the encoded
+  digital datastream from the broadcast signal.
+* Make the encoded digital datastream (MPEG2) available to the data bus.
+
+The significant difference between the two is that the tuner on the
+analogue TV card spits out an Analogue signal, whereas the tuner on the
+digital TV card spits out a compressed encoded digital datastream. As
+the signal is already digitised, it is trivial to pass this datastream
+to the PC databus with minimal additional processing and then extract
+the digital video and audio datastreams passing them to the appropriate
+software or hardware for decoding and viewing.
+
+Getting the card going
+~~~~~~~~~~~~~~~~~~~~~~
+
+The Device Driver API for DVB under Linux will the following
+device nodes via the devfs filesystem:
+
+* /dev/dvb/adapter0/demux0
+* /dev/dvb/adapter0/dvr0
+* /dev/dvb/adapter0/frontend0
+
+The ``/dev/dvb/adapter0/dvr0`` device node is used to read the MPEG2
+Data Stream and the ``/dev/dvb/adapter0/frontend0`` device node is used
+to tune the frontend tuner module. The ``/dev/dvb/adapter0/demux0`` is
+used to control what programs will be received.
+
+Depending on the card's feature set, the Device Driver API could also
+expose other device nodes:
+
+* /dev/dvb/adapter0/ca0
+* /dev/dvb/adapter0/audio0
+* /dev/dvb/adapter0/net0
+* /dev/dvb/adapter0/osd0
+* /dev/dvb/adapter0/video0
+
+The ``/dev/dvb/adapter0/ca0`` is used to decode encrypted channels. The
+other device nodes are found only on devices that use the av7110
+driver, with is now obsoleted, together with the extra API whose such
+devices use.
+
+Receiving a digital TV channel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This section attempts to explain how it works and how this affects the
+configuration of a Digital TV card.
+
+On this example, we're considering tuning into DVB-T channels in
+Australia, at the Melbourne region.
+
+The frequencies broadcast by Mount Dandenong transmitters are,
+currently:
+
+Table 1. Transponder Frequencies Mount Dandenong, Vic, Aus.
+
+===========	===========
+Broadcaster	Frequency
+===========	===========
+Seven		177.500 Mhz
+SBS		184.500 Mhz
+Nine		191.625 Mhz
+Ten		219.500 Mhz
+ABC		226.500 Mhz
+Channel 31	557.625 Mhz
+===========	===========
+
+The digital TV Scan utilities (like dvbv5-scan) have use a set of
+compiled-in defaults for various countries and regions. Those are
+currently provided as a separate package, called dtv-scan-tables. It's
+git tree is located at LinuxTV.org:
+
+    https://git.linuxtv.org/dtv-scan-tables.git/
+
+If none of the tables there suit, you can specify a data file on the
+command line which contains the transponder frequencies. Here is a
+sample file for the above channel transponders, in the old "channel"
+format::
+
+	# Data file for DVB scan program
+	#
+	# C Frequency SymbolRate FEC QAM
+	# S Frequency Polarisation SymbolRate FEC
+	# T Frequency Bandwidth FEC FEC2 QAM Mode Guard Hier
+
+	T 177500000 7MHz AUTO AUTO QAM64 8k 1/16 NONE
+	T 184500000 7MHz AUTO AUTO QAM64 8k 1/8 NONE
+	T 191625000 7MHz AUTO AUTO QAM64 8k 1/16 NONE
+	T 219500000 7MHz AUTO AUTO QAM64 8k 1/16 NONE
+	T 226500000 7MHz AUTO AUTO QAM64 8k 1/16 NONE
+	T 557625000 7MHz AUTO AUTO QPSK 8k 1/16 NONE
+
+Nowadays, we prefer to use a newer format, with is more verbose and easier
+to understand. With the new format, the "Seven" channel transponder's
+data is represented by::
+
+	[Seven]
+		DELIVERY_SYSTEM = DVBT
+		FREQUENCY = 177500000
+		BANDWIDTH_HZ = 7000000
+		CODE_RATE_HP = AUTO
+		CODE_RATE_LP = AUTO
+		MODULATION = QAM/64
+		TRANSMISSION_MODE = 8K
+		GUARD_INTERVAL = 1/16
+		HIERARCHY = NONE
+		INVERSION = AUTO
+
+For an updated version of the complete table, please see:
+
+    https://git.linuxtv.org/dtv-scan-tables.git/tree/dvb-t/au-Melbourne
+
+When the Digital TV scanning utility runs, it will output a file
+containing the information for all the audio and video programs that
+exists into each channel's transponders which the card's frontend can
+lock onto. (i.e. any whose signal is strong enough at your antenna).
+
+Here's the output of the dvbv5 tools from a channel scan took from
+Melburne::
+
+    [ABC HDTV]
+	    SERVICE_ID = 560
+	    VIDEO_PID = 2307
+	    AUDIO_PID = 0
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 226500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 3/4
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [ABC TV Melbourne]
+	    SERVICE_ID = 561
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 226500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 3/4
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [ABC TV 2]
+	    SERVICE_ID = 562
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 226500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 3/4
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [ABC TV 3]
+	    SERVICE_ID = 563
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 226500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 3/4
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [ABC TV 4]
+	    SERVICE_ID = 564
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 226500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 3/4
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [ABC DiG Radio]
+	    SERVICE_ID = 566
+	    VIDEO_PID = 0
+	    AUDIO_PID = 2311
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 226500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 3/4
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [TEN Digital]
+	    SERVICE_ID = 1585
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 219500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [TEN Digital 1]
+	    SERVICE_ID = 1586
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 219500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [TEN Digital 2]
+	    SERVICE_ID = 1587
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 219500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [TEN Digital 3]
+	    SERVICE_ID = 1588
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 219500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [TEN Digital]
+	    SERVICE_ID = 1589
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 219500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [TEN Digital 4]
+	    SERVICE_ID = 1590
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 219500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [TEN Digital]
+	    SERVICE_ID = 1591
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 219500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [TEN HD]
+	    SERVICE_ID = 1592
+	    VIDEO_PID = 514
+	    AUDIO_PID = 0
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 219500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [TEN Digital]
+	    SERVICE_ID = 1593
+	    VIDEO_PID = 512
+	    AUDIO_PID = 650
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 219500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [Nine Digital]
+	    SERVICE_ID = 1072
+	    VIDEO_PID = 513
+	    AUDIO_PID = 660
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 191625000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [Nine Digital HD]
+	    SERVICE_ID = 1073
+	    VIDEO_PID = 512
+	    AUDIO_PID = 0
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 191625000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [Nine Guide]
+	    SERVICE_ID = 1074
+	    VIDEO_PID = 514
+	    AUDIO_PID = 670
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 191625000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 3/4
+	    CODE_RATE_LP = 1/2
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/16
+	    HIERARCHY = NONE
+
+    [7 Digital]
+	    SERVICE_ID = 1328
+	    VIDEO_PID = 769
+	    AUDIO_PID = 770
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 177500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [7 Digital 1]
+	    SERVICE_ID = 1329
+	    VIDEO_PID = 769
+	    AUDIO_PID = 770
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 177500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [7 Digital 2]
+	    SERVICE_ID = 1330
+	    VIDEO_PID = 769
+	    AUDIO_PID = 770
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 177500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [7 Digital 3]
+	    SERVICE_ID = 1331
+	    VIDEO_PID = 769
+	    AUDIO_PID = 770
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 177500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [7 HD Digital]
+	    SERVICE_ID = 1332
+	    VIDEO_PID = 833
+	    AUDIO_PID = 834
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 177500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [7 Program Guide]
+	    SERVICE_ID = 1334
+	    VIDEO_PID = 865
+	    AUDIO_PID = 866
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 177500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [SBS HD]
+	    SERVICE_ID = 784
+	    VIDEO_PID = 102
+	    AUDIO_PID = 103
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 536500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [SBS DIGITAL 1]
+	    SERVICE_ID = 785
+	    VIDEO_PID = 161
+	    AUDIO_PID = 81
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 536500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [SBS DIGITAL 2]
+	    SERVICE_ID = 786
+	    VIDEO_PID = 162
+	    AUDIO_PID = 83
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 536500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [SBS EPG]
+	    SERVICE_ID = 787
+	    VIDEO_PID = 163
+	    AUDIO_PID = 85
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 536500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [SBS RADIO 1]
+	    SERVICE_ID = 798
+	    VIDEO_PID = 0
+	    AUDIO_PID = 201
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 536500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
+
+    [SBS RADIO 2]
+	    SERVICE_ID = 799
+	    VIDEO_PID = 0
+	    AUDIO_PID = 202
+	    DELIVERY_SYSTEM = DVBT
+	    FREQUENCY = 536500000
+	    INVERSION = OFF
+	    BANDWIDTH_HZ = 7000000
+	    CODE_RATE_HP = 2/3
+	    CODE_RATE_LP = 2/3
+	    MODULATION = QAM/64
+	    TRANSMISSION_MODE = 8K
+	    GUARD_INTERVAL = 1/8
+	    HIERARCHY = NONE
diff --git a/Documentation/admin-guide/media/dvb_references.rst b/Documentation/admin-guide/media/dvb_references.rst
new file mode 100644
index 000000000000..48445ac76275
--- /dev/null
+++ b/Documentation/admin-guide/media/dvb_references.rst
@@ -0,0 +1,29 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+References
+==========
+
+The main development site and GIT repository for Digital TV
+drivers is https://linuxtv.org.
+
+The DVB mailing list linux-dvb is hosted at vger. Please see
+http://vger.kernel.org/vger-lists.html#linux-media for details.
+
+There are also some other old lists hosted at:
+https://linuxtv.org/lists.php. If you're insterested on that for historic
+reasons, please check the archive at https://linuxtv.org/pipermail/linux-dvb/.
+
+The media subsystem Wiki is hosted at https://linuxtv.org/wiki/.
+There, you'll find lots of information, from both development and usage
+of media boards. Please check it before asking newbie questions on the
+mailing list or IRC channels.
+
+The API documentation is documented at the Kernel tree. You can find it
+in both html and pdf formats, together with other useful documentation at:
+
+  - https://linuxtv.org/docs.php.
+
+You may also find useful material at https://linuxtv.org/downloads/.
+
+In order to get the needed firmware for some drivers to work, there's
+a script at the kernel tree, at scripts/get_dvb_firmware.
diff --git a/Documentation/admin-guide/media/em28xx-cardlist.rst b/Documentation/admin-guide/media/em28xx-cardlist.rst
new file mode 100644
index 000000000000..a5f0e6d22a1a
--- /dev/null
+++ b/Documentation/admin-guide/media/em28xx-cardlist.rst
@@ -0,0 +1,436 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+EM28xx cards list
+=================
+
+.. tabularcolumns:: |p{1.4cm}|p{10.0cm}|p{1.9cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 12 3 16
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - Empia Chip
+     - USB IDs
+   * - 0
+     - Unknown EM2800 video grabber
+     - em2800
+     - eb1a:2800
+   * - 1
+     - Unknown EM2750/28xx video grabber
+     - em2820 or em2840
+     - eb1a:2710, eb1a:2820, eb1a:2821, eb1a:2860, eb1a:2861, eb1a:2862, eb1a:2863, eb1a:2870, eb1a:2881, eb1a:2883, eb1a:2868, eb1a:2875
+   * - 2
+     - Terratec Cinergy 250 USB
+     - em2820 or em2840
+     - 0ccd:0036
+   * - 3
+     - Pinnacle PCTV USB 2
+     - em2820 or em2840
+     - 2304:0208
+   * - 4
+     - Hauppauge WinTV USB 2
+     - em2820 or em2840
+     - 2040:4200, 2040:4201
+   * - 5
+     - MSI VOX USB 2.0
+     - em2820 or em2840
+     -
+   * - 6
+     - Terratec Cinergy 200 USB
+     - em2800
+     -
+   * - 7
+     - Leadtek Winfast USB II
+     - em2800
+     - 0413:6023
+   * - 8
+     - Kworld USB2800
+     - em2800
+     -
+   * - 9
+     - Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U
+     - em2820 or em2840
+     - 1b80:e302, 1b80:e304, 2304:0207, 2304:021a, 093b:a003
+   * - 10
+     - Hauppauge WinTV HVR 900
+     - em2880
+     - 2040:6500
+   * - 11
+     - Terratec Hybrid XS
+     - em2880
+     -
+   * - 12
+     - Kworld PVR TV 2800 RF
+     - em2820 or em2840
+     -
+   * - 13
+     - Terratec Prodigy XS
+     - em2880
+     -
+   * - 14
+     - SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
+     - em2820 or em2840
+     -
+   * - 15
+     - V-Gear PocketTV
+     - em2800
+     -
+   * - 16
+     - Hauppauge WinTV HVR 950
+     - em2883
+     - 2040:6513, 2040:6517, 2040:651b
+   * - 17
+     - Pinnacle PCTV HD Pro Stick
+     - em2880
+     - 2304:0227
+   * - 18
+     - Hauppauge WinTV HVR 900 (R2)
+     - em2880
+     - 2040:6502
+   * - 19
+     - EM2860/SAA711X Reference Design
+     - em2860
+     -
+   * - 20
+     - AMD ATI TV Wonder HD 600
+     - em2880
+     - 0438:b002
+   * - 21
+     - eMPIA Technology, Inc. GrabBeeX+ Video Encoder
+     - em2800
+     - eb1a:2801
+   * - 22
+     - EM2710/EM2750/EM2751 webcam grabber
+     - em2750
+     - eb1a:2750, eb1a:2751
+   * - 23
+     - Huaqi DLCW-130
+     - em2750
+     -
+   * - 24
+     - D-Link DUB-T210 TV Tuner
+     - em2820 or em2840
+     - 2001:f112
+   * - 25
+     - Gadmei UTV310
+     - em2820 or em2840
+     -
+   * - 26
+     - Hercules Smart TV USB 2.0
+     - em2820 or em2840
+     -
+   * - 27
+     - Pinnacle PCTV USB 2 (Philips FM1216ME)
+     - em2820 or em2840
+     -
+   * - 28
+     - Leadtek Winfast USB II Deluxe
+     - em2820 or em2840
+     -
+   * - 29
+     - EM2860/TVP5150 Reference Design
+     - em2860
+     - eb1a:5051
+   * - 30
+     - Videology 20K14XUSB USB2.0
+     - em2820 or em2840
+     -
+   * - 31
+     - Usbgear VD204v9
+     - em2821
+     -
+   * - 32
+     - Supercomp USB 2.0 TV
+     - em2821
+     -
+   * - 33
+     - Elgato Video Capture
+     - em2860
+     - 0fd9:0033
+   * - 34
+     - Terratec Cinergy A Hybrid XS
+     - em2860
+     - 0ccd:004f
+   * - 35
+     - Typhoon DVD Maker
+     - em2860
+     -
+   * - 36
+     - NetGMBH Cam
+     - em2860
+     -
+   * - 37
+     - Gadmei UTV330
+     - em2860
+     - eb1a:50a6
+   * - 38
+     - Yakumo MovieMixer
+     - em2861
+     -
+   * - 39
+     - KWorld PVRTV 300U
+     - em2861
+     - eb1a:e300
+   * - 40
+     - Plextor ConvertX PX-TV100U
+     - em2861
+     - 093b:a005
+   * - 41
+     - Kworld 350 U DVB-T
+     - em2870
+     - eb1a:e350
+   * - 42
+     - Kworld 355 U DVB-T
+     - em2870
+     - eb1a:e355, eb1a:e357, eb1a:e359
+   * - 43
+     - Terratec Cinergy T XS
+     - em2870
+     -
+   * - 44
+     - Terratec Cinergy T XS (MT2060)
+     - em2870
+     - 0ccd:0043
+   * - 45
+     - Pinnacle PCTV DVB-T
+     - em2870
+     -
+   * - 46
+     - Compro, VideoMate U3
+     - em2870
+     - 185b:2870
+   * - 47
+     - KWorld DVB-T 305U
+     - em2880
+     - eb1a:e305
+   * - 48
+     - KWorld DVB-T 310U
+     - em2880
+     -
+   * - 49
+     - MSI DigiVox A/D
+     - em2880
+     - eb1a:e310
+   * - 50
+     - MSI DigiVox A/D II
+     - em2880
+     - eb1a:e320
+   * - 51
+     - Terratec Hybrid XS Secam
+     - em2880
+     - 0ccd:004c
+   * - 52
+     - DNT DA2 Hybrid
+     - em2881
+     -
+   * - 53
+     - Pinnacle Hybrid Pro
+     - em2881
+     -
+   * - 54
+     - Kworld VS-DVB-T 323UR
+     - em2882
+     - eb1a:e323
+   * - 55
+     - Terratec Cinergy Hybrid T USB XS (em2882)
+     - em2882
+     - 0ccd:005e, 0ccd:0042
+   * - 56
+     - Pinnacle Hybrid Pro (330e)
+     - em2882
+     - 2304:0226
+   * - 57
+     - Kworld PlusTV HD Hybrid 330
+     - em2883
+     - eb1a:a316
+   * - 58
+     - Compro VideoMate ForYou/Stereo
+     - em2820 or em2840
+     - 185b:2041
+   * - 59
+     - Pinnacle PCTV HD Mini
+     - em2874
+     - 2304:023f
+   * - 60
+     - Hauppauge WinTV HVR 850
+     - em2883
+     - 2040:651f
+   * - 61
+     - Pixelview PlayTV Box 4 USB 2.0
+     - em2820 or em2840
+     -
+   * - 62
+     - Gadmei TVR200
+     - em2820 or em2840
+     -
+   * - 63
+     - Kaiomy TVnPC U2
+     - em2860
+     - eb1a:e303
+   * - 64
+     - Easy Cap Capture DC-60
+     - em2860
+     - 1b80:e309
+   * - 65
+     - IO-DATA GV-MVP/SZ
+     - em2820 or em2840
+     - 04bb:0515
+   * - 66
+     - Empire dual TV
+     - em2880
+     -
+   * - 67
+     - Terratec Grabby
+     - em2860
+     - 0ccd:0096, 0ccd:10AF
+   * - 68
+     - Terratec AV350
+     - em2860
+     - 0ccd:0084
+   * - 69
+     - KWorld ATSC 315U HDTV TV Box
+     - em2882
+     - eb1a:a313
+   * - 70
+     - Evga inDtube
+     - em2882
+     -
+   * - 71
+     - Silvercrest Webcam 1.3mpix
+     - em2820 or em2840
+     -
+   * - 72
+     - Gadmei UTV330+
+     - em2861
+     -
+   * - 73
+     - Reddo DVB-C USB TV Box
+     - em2870
+     -
+   * - 74
+     - Actionmaster/LinXcel/Digitus VC211A
+     - em2800
+     -
+   * - 75
+     - Dikom DK300
+     - em2882
+     -
+   * - 76
+     - KWorld PlusTV 340U or UB435-Q (ATSC)
+     - em2870
+     - 1b80:a340
+   * - 77
+     - EM2874 Leadership ISDBT
+     - em2874
+     -
+   * - 78
+     - PCTV nanoStick T2 290e
+     - em28174
+     - 2013:024f
+   * - 79
+     - Terratec Cinergy H5
+     - em2884
+     - eb1a:2885, 0ccd:10a2, 0ccd:10ad, 0ccd:10b6
+   * - 80
+     - PCTV DVB-S2 Stick (460e)
+     - em28174
+     - 2013:024c
+   * - 81
+     - Hauppauge WinTV HVR 930C
+     - em2884
+     - 2040:1605
+   * - 82
+     - Terratec Cinergy HTC Stick
+     - em2884
+     - 0ccd:00b2
+   * - 83
+     - Honestech Vidbox NW03
+     - em2860
+     - eb1a:5006
+   * - 84
+     - MaxMedia UB425-TC
+     - em2874
+     - 1b80:e425
+   * - 85
+     - PCTV QuatroStick (510e)
+     - em2884
+     - 2304:0242
+   * - 86
+     - PCTV QuatroStick nano (520e)
+     - em2884
+     - 2013:0251
+   * - 87
+     - Terratec Cinergy HTC USB XS
+     - em2884
+     - 0ccd:008e, 0ccd:00ac
+   * - 88
+     - C3 Tech Digital Duo HDTV/SDTV USB
+     - em2884
+     - 1b80:e755
+   * - 89
+     - Delock 61959
+     - em2874
+     - 1b80:e1cc
+   * - 90
+     - KWorld USB ATSC TV Stick UB435-Q V2
+     - em2874
+     - 1b80:e346
+   * - 91
+     - SpeedLink Vicious And Devine Laplace webcam
+     - em2765
+     - 1ae7:9003, 1ae7:9004
+   * - 92
+     - PCTV DVB-S2 Stick (461e)
+     - em28178
+     - 2013:0258
+   * - 93
+     - KWorld USB ATSC TV Stick UB435-Q V3
+     - em2874
+     - 1b80:e34c
+   * - 94
+     - PCTV tripleStick (292e)
+     - em28178
+     - 2013:025f, 2013:0264, 2040:0264, 2040:8264, 2040:8268
+   * - 95
+     - Leadtek VC100
+     - em2861
+     - 0413:6f07
+   * - 96
+     - Terratec Cinergy T2 Stick HD
+     - em28178
+     - eb1a:8179
+   * - 97
+     - Elgato EyeTV Hybrid 2008 INT
+     - em2884
+     - 0fd9:0018
+   * - 98
+     - PLEX PX-BCUD
+     - em28178
+     - 3275:0085
+   * - 99
+     - Hauppauge WinTV-dualHD DVB
+     - em28174
+     - 2040:0265, 2040:8265
+   * - 100
+     - Hauppauge WinTV-dualHD 01595 ATSC/QAM
+     - em28174
+     - 2040:026d, 2040:826d
+   * - 101
+     - Terratec Cinergy H6 rev. 2
+     - em2884
+     - 0ccd:10b2
+   * - 102
+     - :ZOLID HYBRID TV STICK
+     - em2882
+     -
+   * - 103
+     - Magix USB Videowandler-2
+     - em2861
+     - 1b80:e349
+   * - 104
+     - PCTV DVB-S2 Stick (461e v2)
+     - em28178
+     - 2013:0461, 2013:0259
diff --git a/Documentation/admin-guide/media/faq.rst b/Documentation/admin-guide/media/faq.rst
new file mode 100644
index 000000000000..b63548b6f313
--- /dev/null
+++ b/Documentation/admin-guide/media/faq.rst
@@ -0,0 +1,216 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+FAQ
+===
+
+.. note::
+
+     1. With Digital TV, a single physical channel may have different
+	contents inside it. The specs call each one as a *service*.
+	This is what a TV user would call "channel". So, in order to
+	avoid confusion, we're calling *transponders* as the physical
+	channel on this FAQ, and *services* for the logical channel.
+     2. The LinuxTV community maintains some Wiki pages with contain
+        a lot of information related to the media subsystem. If you
+        don't find an answer for your needs here, it is likely that
+        you'll be able to get something useful there. It is hosted
+	at:
+
+	https://www.linuxtv.org/wiki/
+
+Some very frequently asked questions about Linux Digital TV support
+
+1. The signal seems to die a few seconds after tuning.
+
+	It's not a bug, it's a feature. Because the frontends have
+	significant power requirements (and hence get very hot), they
+	are powered down if they are unused (i.e. if the frontend device
+	is closed). The ``dvb-core`` module parameter ``dvb_shutdown_timeout``
+	allow you to change the timeout (default 5 seconds). Setting the
+	timeout to 0 disables the timeout feature.
+
+2. How can I watch TV?
+
+	Together with the Linux Kernel, the Digital TV developers support
+	some simple utilities which are mainly intended for testing
+	and to demonstrate how the DVB API works. This is called DVB v5
+	tools and are grouped together with the ``v4l-utils`` git repository:
+
+	    https://git.linuxtv.org/v4l-utils.git/
+
+	You can find more information at the LinuxTV wiki:
+
+	    https://www.linuxtv.org/wiki/index.php/DVBv5_Tools
+
+	The first step is to get a list of services that are transmitted.
+
+	This is done by using several existing tools. You can use
+	for example the ``dvbv5-scan`` tool. You can find more information
+	about it at:
+
+	    https://www.linuxtv.org/wiki/index.php/Dvbv5-scan
+
+	There are some other applications like ``w_scan`` [#]_ that do a
+	blind scan, trying hard to find all possible channels, but
+	those consumes a large amount of time to run.
+
+	.. [#] https://www.linuxtv.org/wiki/index.php/W_scan
+
+	Also, some applications like ``kaffeine`` have their own code
+	to scan for services. So, you don't need to use an external
+	application to obtain such list.
+
+	Most of such tools need a file containing a list of channel
+	transponders available on your area. So, LinuxTV developers
+	maintain tables of Digital TV channel transponders, receiving
+	patches from the community to keep them updated.
+
+	This list is hosted at:
+
+	    https://git.linuxtv.org/dtv-scan-tables.git
+
+	And packaged on several distributions.
+
+	Kaffeine has some blind scan support for some terrestrial standards.
+	It also relies on DTV scan tables, although it contains a copy
+	of it internally (and, if requested by the user, it will download
+	newer versions of it).
+
+	If you are lucky you can just use one of the supplied channel
+	transponders. If not, you may need to seek for such info at
+	the Internet and create a new file. There are several sites with
+	contains physical channel lists. For cable and satellite, usually
+	knowing how to tune into a single channel is enough for the
+	scanning tool to identify the other channels. On some places,
+	this could also work for terrestrial transmissions.
+
+	Once you have a transponders list, you need to generate a services
+	list with a tool like ``dvbv5-scan``.
+
+	Almost all modern Digital TV cards don't have built-in hardware
+	MPEG-decoders. So, it is up to the application to get a MPEG-TS
+	stream provided by the board, split it into audio, video and other
+	data and decode.
+
+3. Which Digital TV applications exist?
+
+	Several media player applications are capable of tuning into
+	digital TV channels, including Kaffeine, Vlc, mplayer and MythTV.
+
+	Kaffeine aims to be very user-friendly, and it is maintained
+	by one of the Kernel driver developers.
+
+	A comprehensive list of those and other apps can be found at:
+
+	    https://www.linuxtv.org/wiki/index.php/TV_Related_Software
+
+	Some of the most popular ones are linked below:
+
+	https://kde.org/applications/multimedia/org.kde.kaffeine
+		KDE media player, focused on Digital TV support
+
+	https://www.linuxtv.org/vdrwiki/index.php/Main_Page
+		Klaus Schmidinger's Video Disk Recorder
+
+	https://linuxtv.org/downloads and https://git.linuxtv.org/
+		Digital TV and other media-related applications and
+		Kernel drivers. The ``v4l-utils`` package there contains
+		several swiss knife tools for using with Digital TV.
+
+	http://sourceforge.net/projects/dvbtools/
+		Dave Chapman's dvbtools package, including
+		dvbstream and dvbtune
+
+	http://www.dbox2.info/
+		LinuxDVB on the dBox2
+
+	http://www.tuxbox.org/
+		the TuxBox CVS many interesting DVB applications and the dBox2
+		DVB source
+
+	http://www.nenie.org/misc/mpsys/
+		MPSYS: a MPEG2 system library and tools
+
+	https://www.videolan.org/vlc/index.pt.html
+		Vlc
+
+	http://mplayerhq.hu/
+		MPlayer
+
+	http://xine.sourceforge.net/ and http://xinehq.de/
+		Xine
+
+	http://www.mythtv.org/
+		MythTV - analog TV and digital TV PVR
+
+	http://dvbsnoop.sourceforge.net/
+		DVB sniffer program to monitor, analyze, debug, dump
+		or view dvb/mpeg/dsm-cc/mhp stream information (TS,
+		PES, SECTION)
+
+4. Can't get a signal tuned correctly
+
+	That could be due to a lot of problems. On my personal experience,
+	usually TV cards need stronger signals than TV sets, and are more
+	sensitive to noise. So, perhaps you just need a better antenna or
+	cabling. Yet, it could also be some hardware or driver issue.
+
+	For example, if you are using a Technotrend/Hauppauge DVB-C card
+	*without* analog module, you might have to use module parameter
+	adac=-1 (dvb-ttpci.o).
+
+	Please see the FAQ page at linuxtv.org, as it could contain some
+	valuable information:
+
+	    https://www.linuxtv.org/wiki/index.php/FAQ_%26_Troubleshooting
+
+	If that doesn't work, check at the linux-media ML archives, to
+	see if someone else had a similar problem with your hardware
+	and/or digital TV service provider:
+
+	    https://lore.kernel.org/linux-media/
+
+	If none of this works, you can try sending an e-mail to the
+	linux-media ML and see if someone else could shed some light.
+	The e-mail is linux-media AT vger.kernel.org.
+
+5. The dvb_net device doesn't give me any packets at all
+
+	Run ``tcpdump`` on the ``dvb0_0`` interface. This sets the interface
+	into promiscuous mode so it accepts any packets from the PID
+	you have configured with the ``dvbnet`` utility. Check if there
+	are any packets with the IP addr and MAC addr you have
+	configured with ``ifconfig`` or with ``ip addr``.
+
+	If ``tcpdump`` doesn't give you any output, check the statistics
+	which ``ifconfig`` or ``netstat -ni`` outputs. (Note: If the MAC
+	address is wrong, ``dvb_net`` won't get any input; thus you have to
+	run ``tcpdump`` before checking the statistics.) If there are no
+	packets at all then maybe the PID is wrong. If there are error packets,
+	then either the PID is wrong or the stream does not conform to
+	the MPE standard (EN 301 192, http://www.etsi.org/). You can
+	use e.g. ``dvbsnoop`` for debugging.
+
+6. The ``dvb_net`` device doesn't give me any multicast packets
+
+	Check your routes if they include the multicast address range.
+	Additionally make sure that "source validation by reversed path
+	lookup" is disabled::
+
+	  $ "echo 0 > /proc/sys/net/ipv4/conf/dvb0/rp_filter"
+
+7. What are all those modules that need to be loaded?
+
+	In order to make it more flexible and support different hardware
+	combinations, the media subsystem is written on a modular way.
+
+	So, besides the Digital TV hardware module for the main chipset,
+	it also needs to load a frontend driver, plus the Digital TV
+	core. If the board also has remote controller, it will also
+	need the remote controller core and the remote controller tables.
+	The same happens if the board has support for analog TV: the
+	core support for video4linux need to be loaded.
+
+	The actual module names are Linux-kernel version specific, as,
+	from time to time, things change, in order to make the media
+	support more flexible.
diff --git a/Documentation/admin-guide/media/fimc.rst b/Documentation/admin-guide/media/fimc.rst
new file mode 100644
index 000000000000..0b8ddc4a3008
--- /dev/null
+++ b/Documentation/admin-guide/media/fimc.rst
@@ -0,0 +1,153 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+The Samsung S5P/EXYNOS4 FIMC driver
+===================================
+
+Copyright |copy| 2012 - 2013 Samsung Electronics Co., Ltd.
+
+The FIMC (Fully Interactive Mobile Camera) device available in Samsung
+SoC Application Processors is an integrated camera host interface, color
+space converter, image resizer and rotator.  It's also capable of capturing
+data from LCD controller (FIMD) through the SoC internal writeback data
+path.  There are multiple FIMC instances in the SoCs (up to 4), having
+slightly different capabilities, like pixel alignment constraints, rotator
+availability, LCD writeback support, etc. The driver is located at
+drivers/media/platform/exynos4-is directory.
+
+Supported SoCs
+--------------
+
+S5PC100 (mem-to-mem only), S5PV210, EXYNOS4210
+
+Supported features
+------------------
+
+- camera parallel interface capture (ITU-R.BT601/565);
+- camera serial interface capture (MIPI-CSI2);
+- memory-to-memory processing (color space conversion, scaling, mirror
+  and rotation);
+- dynamic pipeline re-configuration at runtime (re-attachment of any FIMC
+  instance to any parallel video input or any MIPI-CSI front-end);
+- runtime PM and system wide suspend/resume
+
+Not currently supported
+-----------------------
+
+- LCD writeback input
+- per frame clock gating (mem-to-mem)
+
+User space interfaces
+---------------------
+
+Media device interface
+~~~~~~~~~~~~~~~~~~~~~~
+
+The driver supports Media Controller API as defined at :ref:`media_controller`.
+The media device driver name is "SAMSUNG S5P FIMC".
+
+The purpose of this interface is to allow changing assignment of FIMC instances
+to the SoC peripheral camera input at runtime and optionally to control internal
+connections of the MIPI-CSIS device(s) to the FIMC entities.
+
+The media device interface allows to configure the SoC for capturing image
+data from the sensor through more than one FIMC instance (e.g. for simultaneous
+viewfinder and still capture setup).
+
+Reconfiguration is done by enabling/disabling media links created by the driver
+during initialization. The internal device topology can be easily discovered
+through media entity and links enumeration.
+
+Memory-to-memory video node
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+V4L2 memory-to-memory interface at /dev/video? device node.  This is standalone
+video device, it has no media pads. However please note the mem-to-mem and
+capture video node operation on same FIMC instance is not allowed.  The driver
+detects such cases but the applications should prevent them to avoid an
+undefined behaviour.
+
+Capture video node
+~~~~~~~~~~~~~~~~~~
+
+The driver supports V4L2 Video Capture Interface as defined at
+:ref:`devices`.
+
+At the capture and mem-to-mem video nodes only the multi-planar API is
+supported. For more details see: :ref:`planar-apis`.
+
+Camera capture subdevs
+~~~~~~~~~~~~~~~~~~~~~~
+
+Each FIMC instance exports a sub-device node (/dev/v4l-subdev?), a sub-device
+node is also created per each available and enabled at the platform level
+MIPI-CSI receiver device (currently up to two).
+
+sysfs
+~~~~~
+
+In order to enable more precise camera pipeline control through the sub-device
+API the driver creates a sysfs entry associated with "s5p-fimc-md" platform
+device. The entry path is: /sys/platform/devices/s5p-fimc-md/subdev_conf_mode.
+
+In typical use case there could be a following capture pipeline configuration:
+sensor subdev -> mipi-csi subdev -> fimc subdev -> video node
+
+When we configure these devices through sub-device API at user space, the
+configuration flow must be from left to right, and the video node is
+configured as last one.
+
+When we don't use sub-device user space API the whole configuration of all
+devices belonging to the pipeline is done at the video node driver.
+The sysfs entry allows to instruct the capture node driver not to configure
+the sub-devices (format, crop), to avoid resetting the subdevs' configuration
+when the last configuration steps at the video node is performed.
+
+For full sub-device control support (subdevs configured at user space before
+starting streaming):
+
+.. code-block:: none
+
+	# echo "sub-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode
+
+For V4L2 video node control only (subdevs configured internally by the host
+driver):
+
+.. code-block:: none
+
+	# echo "vid-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode
+
+This is a default option.
+
+5. Device mapping to video and subdev device nodes
+--------------------------------------------------
+
+There are associated two video device nodes with each device instance in
+hardware - video capture and mem-to-mem and additionally a subdev node for
+more precise FIMC capture subsystem control. In addition a separate v4l2
+sub-device node is created per each MIPI-CSIS device.
+
+How to find out which /dev/video? or /dev/v4l-subdev? is assigned to which
+device?
+
+You can either grep through the kernel log to find relevant information, i.e.
+
+.. code-block:: none
+
+	# dmesg | grep -i fimc
+
+(note that udev, if present, might still have rearranged the video nodes),
+
+or retrieve the information from /dev/media? with help of the media-ctl tool:
+
+.. code-block:: none
+
+	# media-ctl -p
+
+7. Build
+--------
+
+If the driver is built as a loadable kernel module (CONFIG_VIDEO_SAMSUNG_S5P_FIMC=m)
+two modules are created (in addition to the core v4l2 modules): s5p-fimc.ko and
+optional s5p-csis.ko (MIPI-CSI receiver subdev).
diff --git a/Documentation/admin-guide/media/frontend-cardlist.rst b/Documentation/admin-guide/media/frontend-cardlist.rst
new file mode 100644
index 000000000000..73a248c1b064
--- /dev/null
+++ b/Documentation/admin-guide/media/frontend-cardlist.rst
@@ -0,0 +1,226 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+Frontend drivers
+================
+
+.. note::
+
+  #) There is no guarantee that every frontend driver works
+     out of the box with every card, because of different wiring.
+
+  #) The demodulator chips can be used with a variety of
+     tuner/PLL chips, and not all combinations are supported. Often
+     the demodulator and tuner/PLL chip are inside a metal box for
+     shielding, and the whole metal box has its own part number.
+
+
+Common Interface (EN50221) controller drivers
+=============================================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+cxd2099         Sony CXD2099AR Common Interface driver
+sp2             CIMaX SP2
+==============  =========================================================
+
+ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+============================================================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+au8522_dig      Auvitek AU8522 based DTV demod
+au8522_decoder  Auvitek AU8522 based ATV demod
+bcm3510         Broadcom BCM3510
+lg2160          LG Electronics LG216x based
+lgdt3305        LG Electronics LGDT3304 and LGDT3305 based
+lgdt3306a       LG Electronics LGDT3306A based
+lgdt330x        LG Electronics LGDT3302/LGDT3303 based
+nxt200x         NxtWave Communications NXT2002/NXT2004 based
+or51132         Oren OR51132 based
+or51211         Oren OR51211 based
+s5h1409         Samsung S5H1409 based
+s5h1411         Samsung S5H1411 based
+==============  =========================================================
+
+DVB-C (cable) frontends
+=======================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+stv0297         ST STV0297 based
+tda10021        Philips TDA10021 based
+tda10023        Philips TDA10023 based
+ves1820         VLSI VES1820 based
+==============  =========================================================
+
+DVB-S (satellite) frontends
+===========================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+cx24110         Conexant CX24110 based
+cx24116         Conexant CX24116 based
+cx24117         Conexant CX24117 based
+cx24120         Conexant CX24120 based
+cx24123         Conexant CX24123 based
+ds3000          Montage Tehnology DS3000 based
+mb86a16         Fujitsu MB86A16 based
+mt312           Zarlink VP310/MT312/ZL10313 based
+s5h1420         Samsung S5H1420 based
+si21xx          Silicon Labs SI21XX based
+stb6000         ST STB6000 silicon tuner
+stv0288         ST STV0288 based
+stv0299         ST STV0299 based
+stv0900         ST STV0900 based
+stv6110         ST STV6110 silicon tuner
+tda10071        NXP TDA10071
+tda10086        Philips TDA10086 based
+tda8083         Philips TDA8083 based
+tda8261         Philips TDA8261 based
+tda826x         Philips TDA826X silicon tuner
+ts2020          Montage Tehnology TS2020 based tuners
+tua6100         Infineon TUA6100 PLL
+cx24113         Conexant CX24113/CX24128 tuner for DVB-S/DSS
+itd1000         Integrant ITD1000 Zero IF tuner for DVB-S/DSS
+ves1x93         VLSI VES1893 or VES1993 based
+zl10036         Zarlink ZL10036 silicon tuner
+zl10039         Zarlink ZL10039 silicon tuner
+==============  =========================================================
+
+DVB-T (terrestrial) frontends
+=============================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+af9013          Afatech AF9013 demodulator
+cx22700         Conexant CX22700 based
+cx22702         Conexant cx22702 demodulator (OFDM)
+cxd2820r        Sony CXD2820R
+cxd2841er       Sony CXD2841ER
+cxd2880         Sony CXD2880 DVB-T2/T tuner + demodulator
+dib3000mb       DiBcom 3000M-B
+dib3000mc       DiBcom 3000P/M-C
+dib7000m        DiBcom 7000MA/MB/PA/PB/MC
+dib7000p        DiBcom 7000PC
+dib9000         DiBcom 9000
+drxd            Micronas DRXD driver
+ec100           E3C EC100
+l64781          LSI L64781
+mt352           Zarlink MT352 based
+nxt6000         NxtWave Communications NXT6000 based
+rtl2830         Realtek RTL2830 DVB-T
+rtl2832         Realtek RTL2832 DVB-T
+rtl2832_sdr     Realtek RTL2832 SDR
+s5h1432         Samsung s5h1432 demodulator (OFDM)
+si2168          Silicon Labs Si2168
+sp8870          Spase sp8870 based
+sp887x          Spase sp887x based
+stv0367         ST STV0367 based
+tda10048        Philips TDA10048HN based
+tda1004x        Philips TDA10045H/TDA10046H based
+zd1301_demod    ZyDAS ZD1301
+zl10353         Zarlink ZL10353 based
+==============  =========================================================
+
+Digital terrestrial only tuners/PLL
+===================================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+dvb-pll         Generic I2C PLL based tuners
+dib0070         DiBcom DiB0070 silicon base-band tuner
+dib0090         DiBcom DiB0090 silicon base-band tuner
+==============  =========================================================
+
+ISDB-S (satellite) & ISDB-T (terrestrial) frontends
+===================================================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+mn88443x        Socionext MN88443x
+tc90522         Toshiba TC90522
+==============  =========================================================
+
+ISDB-T (terrestrial) frontends
+==============================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+dib8000         DiBcom 8000MB/MC
+mb86a20s        Fujitsu mb86a20s
+s921            Sharp S921 frontend
+==============  =========================================================
+
+Multistandard (cable + terrestrial) frontends
+=============================================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+drxk            Micronas DRXK based
+mn88472         Panasonic MN88472
+mn88473         Panasonic MN88473
+si2165          Silicon Labs si2165 based
+tda18271c2dd    NXP TDA18271C2 silicon tuner
+==============  =========================================================
+
+Multistandard (satellite) frontends
+===================================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+m88ds3103       Montage Technology M88DS3103
+mxl5xx          MaxLinear MxL5xx based tuner-demodulators
+stb0899         STB0899 based
+stb6100         STB6100 based tuners
+stv090x         STV0900/STV0903(A/B) based
+stv0910         STV0910 based
+stv6110x        STV6110/(A) based tuners
+stv6111         STV6111 based tuners
+==============  =========================================================
+
+SEC control devices for DVB-S
+=============================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+a8293           Allegro A8293
+af9033          Afatech AF9033 DVB-T demodulator
+ascot2e         Sony Ascot2E tuner
+atbm8830        AltoBeam ATBM8830/8831 DMB-TH demodulator
+drx39xyj        Micronas DRX-J demodulator
+helene          Sony HELENE Sat/Ter tuner (CXD2858ER)
+horus3a         Sony Horus3A tuner
+isl6405         ISL6405 SEC controller
+isl6421         ISL6421 SEC controller
+isl6423         ISL6423 SEC controller
+ix2505v         Sharp IX2505V silicon tuner
+lgs8gl5         Silicon Legend LGS-8GL5 demodulator (OFDM)
+lgs8gxx         Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator
+lnbh25          LNBH25 SEC controller
+lnbh29          LNBH29 SEC controller
+lnbp21          LNBP21/LNBH24 SEC controllers
+lnbp22          LNBP22 SEC controllers
+m88rs2000       M88RS2000 DVB-S demodulator and tuner
+tda665x         TDA665x tuner
+==============  =========================================================
+
+Tools to develop new frontends
+==============================
+
+==============  =========================================================
+Driver          Name
+==============  =========================================================
+dvb_dummy_fe    Dummy frontend driver
+==============  =========================================================
diff --git a/Documentation/admin-guide/media/gspca-cardlist.rst b/Documentation/admin-guide/media/gspca-cardlist.rst
new file mode 100644
index 000000000000..adda933616f1
--- /dev/null
+++ b/Documentation/admin-guide/media/gspca-cardlist.rst
@@ -0,0 +1,451 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The gspca cards list
+====================
+
+The modules for the gspca webcam drivers are:
+
+- gspca_main: main driver
+- gspca\_\ *driver*: subdriver module with *driver* as follows
+
+=========	=========	===================================================================
+*driver*	vend:prod	Device
+=========	=========	===================================================================
+spca501         0000:0000	MystFromOri Unknown Camera
+spca508         0130:0130	Clone Digital Webcam 11043
+se401           03e8:0004	Endpoints/AoxSE401
+zc3xx           03f0:1b07	HP Premium Starter Cam
+m5602           0402:5602	ALi Video Camera Controller
+spca501         040a:0002	Kodak DVC-325
+spca500         040a:0300	Kodak EZ200
+zc3xx           041e:041e	Creative WebCam Live!
+ov519           041e:4003	Video Blaster WebCam Go Plus
+stv0680         041e:4007	Go Mini
+spca500         041e:400a	Creative PC-CAM 300
+sunplus         041e:400b	Creative PC-CAM 600
+sunplus         041e:4012	PC-Cam350
+sunplus         041e:4013	Creative Pccam750
+zc3xx           041e:4017	Creative Webcam Mobile PD1090
+spca508         041e:4018	Creative Webcam Vista (PD1100)
+spca561         041e:401a	Creative Webcam Vista (PD1100)
+zc3xx           041e:401c	Creative NX
+spca505         041e:401d	Creative Webcam NX ULTRA
+zc3xx           041e:401e	Creative Nx Pro
+zc3xx           041e:401f	Creative Webcam Notebook PD1171
+zc3xx           041e:4022	Webcam NX Pro
+pac207          041e:4028	Creative Webcam Vista Plus
+zc3xx           041e:4029	Creative WebCam Vista Pro
+zc3xx           041e:4034	Creative Instant P0620
+zc3xx           041e:4035	Creative Instant P0620D
+zc3xx           041e:4036	Creative Live !
+sq930x          041e:4038	Creative Joy-IT
+zc3xx           041e:403a	Creative Nx Pro 2
+spca561         041e:403b	Creative Webcam Vista (VF0010)
+sq930x          041e:403c	Creative Live! Ultra
+sq930x          041e:403d	Creative Live! Ultra for Notebooks
+sq930x          041e:4041	Creative Live! Motion
+zc3xx           041e:4051	Creative Live!Cam Notebook Pro (VF0250)
+ov519           041e:4052	Creative Live! VISTA IM
+zc3xx           041e:4053	Creative Live!Cam Video IM
+vc032x          041e:405b	Creative Live! Cam Notebook Ultra (VC0130)
+ov519           041e:405f	Creative Live! VISTA VF0330
+ov519           041e:4060	Creative Live! VISTA VF0350
+ov519           041e:4061	Creative Live! VISTA VF0400
+ov519           041e:4064	Creative Live! VISTA VF0420
+ov519           041e:4067	Creative Live! Cam Video IM (VF0350)
+ov519           041e:4068	Creative Live! VISTA VF0470
+sn9c2028        0458:7003	GeniusVideocam Live v2
+spca561         0458:7004	Genius VideoCAM Express V2
+sn9c2028        0458:7005	Genius Smart 300, version 2
+sunplus         0458:7006	Genius Dsc 1.3 Smart
+zc3xx           0458:7007	Genius VideoCam V2
+zc3xx           0458:700c	Genius VideoCam V3
+zc3xx           0458:700f	Genius VideoCam Web V2
+sonixj          0458:7025	Genius Eye 311Q
+sn9c20x         0458:7029	Genius Look 320s
+sonixj          0458:702e	Genius Slim 310 NB
+sn9c20x         0458:7045	Genius Look 1320 V2
+sn9c20x         0458:704a	Genius Slim 1320
+sn9c20x         0458:704c	Genius i-Look 1321
+sn9c20x         045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)
+sonixj          045e:00f5	MicroSoft VX3000
+sonixj          045e:00f7	MicroSoft VX1000
+ov519           045e:028c	Micro$oft xbox cam
+kinect          045e:02ae	Xbox NUI Camera
+kinect          045e:02bf	Kinect for Windows NUI Camera
+spca561         0461:0815	Micro Innovations IC200 Webcam
+sunplus         0461:0821	Fujifilm MV-1
+zc3xx           0461:0a00	MicroInnovation WebCam320
+stv06xx         046D:08F0	QuickCamMessenger
+stv06xx         046D:08F5	QuickCamCommunicate
+stv06xx         046D:08F6	QuickCamMessenger (new)
+stv06xx         046d:0840	QuickCamExpress
+stv06xx         046d:0850	LEGOcam / QuickCam Web
+stv06xx         046d:0870	DexxaWebCam USB
+spca500         046d:0890	Logitech QuickCam traveler
+vc032x          046d:0892	Logitech Orbicam
+vc032x          046d:0896	Logitech Orbicam
+vc032x          046d:0897	Logitech QuickCam for Dell notebooks
+zc3xx           046d:089d	Logitech QuickCam E2500
+zc3xx           046d:08a0	Logitech QC IM
+zc3xx           046d:08a1	Logitech QC IM 0x08A1 +sound
+zc3xx           046d:08a2	Labtec Webcam Pro
+zc3xx           046d:08a3	Logitech QC Chat
+zc3xx           046d:08a6	Logitech QCim
+zc3xx           046d:08a7	Logitech QuickCam Image
+zc3xx           046d:08a9	Logitech Notebook Deluxe
+zc3xx           046d:08aa	Labtec Webcam Notebook
+zc3xx           046d:08ac	Logitech QuickCam Cool
+zc3xx           046d:08ad	Logitech QCCommunicate STX
+zc3xx           046d:08ae	Logitech QuickCam for Notebooks
+zc3xx           046d:08af	Logitech QuickCam Cool
+zc3xx           046d:08b9	Logitech QuickCam Express
+zc3xx           046d:08d7	Logitech QCam STX
+zc3xx           046d:08d8	Logitech Notebook Deluxe
+zc3xx           046d:08d9	Logitech QuickCam IM/Connect
+zc3xx           046d:08da	Logitech QuickCam Messenger
+zc3xx           046d:08dd	Logitech QuickCam for Notebooks
+spca500         046d:0900	Logitech Inc. ClickSmart 310
+spca500         046d:0901	Logitech Inc. ClickSmart 510
+sunplus         046d:0905	Logitech ClickSmart 820
+tv8532          046d:0920	Logitech QuickCam Express
+tv8532          046d:0921	Labtec Webcam
+spca561         046d:0928	Logitech QC Express Etch2
+spca561         046d:0929	Labtec Webcam Elch2
+spca561         046d:092a	Logitech QC for Notebook
+spca561         046d:092b	Labtec Webcam Plus
+spca561         046d:092c	Logitech QC chat Elch2
+spca561         046d:092d	Logitech QC Elch2
+spca561         046d:092e	Logitech QC Elch2
+spca561         046d:092f	Logitech QuickCam Express Plus
+sunplus         046d:0960	Logitech ClickSmart 420
+nw80x           046d:d001	Logitech QuickCam Pro (dark focus ring)
+se401           0471:030b	PhilipsPCVC665K
+sunplus         0471:0322	Philips DMVC1300K
+zc3xx           0471:0325	Philips SPC 200 NC
+zc3xx           0471:0326	Philips SPC 300 NC
+sonixj          0471:0327	Philips SPC 600 NC
+sonixj          0471:0328	Philips SPC 700 NC
+zc3xx           0471:032d	Philips SPC 210 NC
+zc3xx           0471:032e	Philips SPC 315 NC
+sonixj          0471:0330	Philips SPC 710 NC
+se401           047d:5001	Kensington67014
+se401           047d:5002	Kensington6701(5/7)
+se401           047d:5003	Kensington67016
+spca501         0497:c001	Smile International
+sunplus         04a5:3003	Benq DC 1300
+sunplus         04a5:3008	Benq DC 1500
+sunplus         04a5:300a	Benq DC 3410
+spca500         04a5:300c	Benq DC 1016
+benq            04a5:3035	Benq DC E300
+vicam           04c1:009d	HomeConnect Webcam [vicam]
+konica          04c8:0720	IntelYC 76
+finepix         04cb:0104	Fujifilm FinePix 4800
+finepix         04cb:0109	Fujifilm FinePix A202
+finepix         04cb:010b	Fujifilm FinePix A203
+finepix         04cb:010f	Fujifilm FinePix A204
+finepix         04cb:0111	Fujifilm FinePix A205
+finepix         04cb:0113	Fujifilm FinePix A210
+finepix         04cb:0115	Fujifilm FinePix A303
+finepix         04cb:0117	Fujifilm FinePix A310
+finepix         04cb:0119	Fujifilm FinePix F401
+finepix         04cb:011b	Fujifilm FinePix F402
+finepix         04cb:011d	Fujifilm FinePix F410
+finepix         04cb:0121	Fujifilm FinePix F601
+finepix         04cb:0123	Fujifilm FinePix F700
+finepix         04cb:0125	Fujifilm FinePix M603
+finepix         04cb:0127	Fujifilm FinePix S300
+finepix         04cb:0129	Fujifilm FinePix S304
+finepix         04cb:012b	Fujifilm FinePix S500
+finepix         04cb:012d	Fujifilm FinePix S602
+finepix         04cb:012f	Fujifilm FinePix S700
+finepix         04cb:0131	Fujifilm FinePix unknown model
+finepix         04cb:013b	Fujifilm FinePix unknown model
+finepix         04cb:013d	Fujifilm FinePix unknown model
+finepix         04cb:013f	Fujifilm FinePix F420
+sunplus         04f1:1001	JVC GC A50
+spca561         04fc:0561	Flexcam 100
+spca1528        04fc:1528	Sunplus MD80 clone
+sunplus         04fc:500c	Sunplus CA500C
+sunplus         04fc:504a	Aiptek Mini PenCam 1.3
+sunplus         04fc:504b	Maxell MaxPocket LE 1.3
+sunplus         04fc:5330	Digitrex 2110
+sunplus         04fc:5360	Sunplus Generic
+spca500         04fc:7333	PalmPixDC85
+sunplus         04fc:ffff	Pure DigitalDakota
+nw80x           0502:d001	DVC V6
+spca501         0506:00df	3Com HomeConnect Lite
+sunplus         052b:1507	Megapixel 5 Pretec DC-1007
+sunplus         052b:1513	Megapix V4
+sunplus         052b:1803	MegaImage VI
+nw80x           052b:d001	EZCam Pro p35u
+tv8532          0545:808b	Veo Stingray
+tv8532          0545:8333	Veo Stingray
+sunplus         0546:3155	Polaroid PDC3070
+sunplus         0546:3191	Polaroid Ion 80
+sunplus         0546:3273	Polaroid PDC2030
+touptek         0547:6801	TTUCMOS08000KPB, AS MU800
+dtcs033         0547:7303	Anchor Chips, Inc
+ov519           054c:0154	Sonny toy4
+ov519           054c:0155	Sonny toy5
+cpia1           0553:0002	CPIA CPiA (version1) based cameras
+stv0680         0553:0202	STV0680 Camera
+zc3xx           055f:c005	Mustek Wcam300A
+spca500         055f:c200	Mustek Gsmart 300
+sunplus         055f:c211	Kowa Bs888e Microcamera
+spca500         055f:c220	Gsmart Mini
+sunplus         055f:c230	Mustek Digicam 330K
+sunplus         055f:c232	Mustek MDC3500
+sunplus         055f:c360	Mustek DV4000 Mpeg4
+sunplus         055f:c420	Mustek gSmart Mini 2
+sunplus         055f:c430	Mustek Gsmart LCD 2
+sunplus         055f:c440	Mustek DV 3000
+sunplus         055f:c520	Mustek gSmart Mini 3
+sunplus         055f:c530	Mustek Gsmart LCD 3
+sunplus         055f:c540	Gsmart D30
+sunplus         055f:c630	Mustek MDC4000
+sunplus         055f:c650	Mustek MDC5500Z
+nw80x           055f:d001	Mustek Wcam 300 mini
+zc3xx           055f:d003	Mustek WCam300A
+zc3xx           055f:d004	Mustek WCam300 AN
+conex           0572:0041	Creative Notebook cx11646
+ov519           05a9:0511	Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Camera
+ov519           05a9:0518	Creative WebCam
+ov519           05a9:0519	OV519 Microphone
+ov519           05a9:0530	OmniVision
+ov534_9         05a9:1550	OmniVision VEHO Filmscanner
+ov519           05a9:2800	OmniVision SuperCAM
+ov519           05a9:4519	Webcam Classic
+ov534_9         05a9:8065	OmniVision test kit ov538+ov9712
+ov519           05a9:8519	OmniVision
+ov519           05a9:a511	D-Link USB Digital Video Camera
+ov519           05a9:a518	D-Link DSB-C310 Webcam
+sunplus         05da:1018	Digital Dream Enigma 1.3
+stk014          05e1:0893	Syntek DV4000
+gl860           05e3:0503	Genesys Logic PC Camera
+gl860           05e3:f191	Genesys Logic PC Camera
+vicam           0602:1001	ViCam Webcam
+spca561         060b:a001	Maxell Compact Pc PM3
+zc3xx           0698:2003	CTX M730V built in
+topro           06a2:0003	TP6800 PC Camera, CmoX CX0342 webcam
+topro           06a2:6810	Creative Qmax
+nw80x           06a5:0000	Typhoon Webcam 100 USB
+nw80x           06a5:d001	Divio based webcams
+nw80x           06a5:d800	Divio Chicony TwinkleCam, Trust SpaceCam
+spca500         06bd:0404	Agfa CL20
+spca500         06be:0800	Optimedia
+nw80x           06be:d001	EZCam Pro p35u
+sunplus         06d6:0031	Trust 610 LCD PowerC@m Zoom
+sunplus         06d6:0041	Aashima Technology B.V.
+spca506         06e1:a190	ADS Instant VCD
+ov534           06f8:3002	Hercules Blog Webcam
+ov534_9         06f8:3003	Hercules Dualpix HD Weblog
+sonixj          06f8:3004	Hercules Classic Silver
+sonixj          06f8:3008	Hercules Deluxe Optical Glass
+pac7302         06f8:3009	Hercules Classic Link
+pac7302         06f8:301b	Hercules Link
+nw80x           0728:d001	AVerMedia Camguard
+spca508         0733:0110	ViewQuest VQ110
+spca501         0733:0401	Intel Create and Share
+spca501         0733:0402	ViewQuest M318B
+spca505         0733:0430	Intel PC Camera Pro
+sunplus         0733:1311	Digital Dream Epsilon 1.3
+sunplus         0733:1314	Mercury 2.1MEG Deluxe Classic Cam
+sunplus         0733:2211	Jenoptik jdc 21 LCD
+sunplus         0733:2221	Mercury Digital Pro 3.1p
+sunplus         0733:3261	Concord 3045 spca536a
+sunplus         0733:3281	Cyberpix S550V
+spca506         0734:043b	3DeMon USB Capture aka
+cpia1           0813:0001	QX3 camera
+ov519           0813:0002	Dual Mode USB Camera Plus
+spca500         084d:0003	D-Link DSC-350
+spca500         08ca:0103	Aiptek PocketDV
+sunplus         08ca:0104	Aiptek PocketDVII 1.3
+sunplus         08ca:0106	Aiptek Pocket DV3100+
+mr97310a        08ca:0110	Trust Spyc@m 100
+mr97310a        08ca:0111	Aiptek PenCam VGA+
+sunplus         08ca:2008	Aiptek Mini PenCam 2 M
+sunplus         08ca:2010	Aiptek PocketCam 3M
+sunplus         08ca:2016	Aiptek PocketCam 2 Mega
+sunplus         08ca:2018	Aiptek Pencam SD 2M
+sunplus         08ca:2020	Aiptek Slim 3000F
+sunplus         08ca:2022	Aiptek Slim 3200
+sunplus         08ca:2024	Aiptek DV3500 Mpeg4
+sunplus         08ca:2028	Aiptek PocketCam4M
+sunplus         08ca:2040	Aiptek PocketDV4100M
+sunplus         08ca:2042	Aiptek PocketDV5100
+sunplus         08ca:2050	Medion MD 41437
+sunplus         08ca:2060	Aiptek PocketDV5300
+tv8532          0923:010f	ICM532 cams
+mr97310a        093a:010e	All known CIF cams with this ID
+mr97310a        093a:010f	All known VGA cams with this ID
+mars            093a:050f	Mars-Semi Pc-Camera
+pac207          093a:2460	Qtec Webcam 100
+pac207          093a:2461	HP Webcam
+pac207          093a:2463	Philips SPC 220 NC
+pac207          093a:2464	Labtec Webcam 1200
+pac207          093a:2468	Webcam WB-1400T
+pac207          093a:2470	Genius GF112
+pac207          093a:2471	Genius VideoCam ge111
+pac207          093a:2472	Genius VideoCam ge110
+pac207          093a:2474	Genius iLook 111
+pac207          093a:2476	Genius e-Messenger 112
+pac7311         093a:2600	PAC7311 Typhoon
+pac7311         093a:2601	Philips SPC 610 NC
+pac7311         093a:2603	Philips SPC 500 NC
+pac7311         093a:2608	Trust WB-3300p
+pac7311         093a:260e	Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
+pac7311         093a:260f	SnakeCam
+pac7302         093a:2620	Apollo AC-905
+pac7302         093a:2621	PAC731x
+pac7302         093a:2622	Genius Eye 312
+pac7302         093a:2623	Pixart Imaging, Inc.
+pac7302         093a:2624	PAC7302
+pac7302         093a:2625	Genius iSlim 310
+pac7302         093a:2626	Labtec 2200
+pac7302         093a:2627	Genius FaceCam 300
+pac7302         093a:2628	Genius iLook 300
+pac7302         093a:2629	Genious iSlim 300
+pac7302         093a:262a	Webcam 300k
+pac7302         093a:262c	Philips SPC 230 NC
+jl2005bcd       0979:0227	Various brands, 19 known cameras supported
+jeilinj         0979:0270	Sakar 57379
+jeilinj         0979:0280	Sportscam DV15, Sakar 57379
+zc3xx           0ac8:0301	Web Camera
+zc3xx           0ac8:0302	Z-star Vimicro zc0302
+vc032x          0ac8:0321	Vimicro generic vc0321
+vc032x          0ac8:0323	Vimicro Vc0323
+vc032x          0ac8:0328	A4Tech PK-130MG
+zc3xx           0ac8:301b	Z-Star zc301b
+zc3xx           0ac8:303b	Vimicro 0x303b
+zc3xx           0ac8:305b	Z-star Vimicro zc0305b
+zc3xx           0ac8:307b	PC Camera (ZS0211)
+vc032x          0ac8:c001	Sony embedded vimicro
+vc032x          0ac8:c002	Sony embedded vimicro
+vc032x          0ac8:c301	Samsung Q1 Ultra Premium
+spca508         0af9:0010	Hama USB Sightcam 100
+spca508         0af9:0011	Hama USB Sightcam 100
+ov519           0b62:0059	iBOT2 Webcam
+sonixb          0c45:6001	Genius VideoCAM NB
+sonixb          0c45:6005	Microdia Sweex Mini Webcam
+sonixb          0c45:6007	Sonix sn9c101 + Tas5110D
+sonixb          0c45:6009	spcaCam@120
+sonixb          0c45:600d	spcaCam@120
+sonixb          0c45:6011	Microdia PC Camera (SN9C102)
+sonixb          0c45:6019	Generic Sonix OV7630
+sonixb          0c45:6024	Generic Sonix Tas5130c
+sonixb          0c45:6025	Xcam Shanga
+sonixb          0c45:6027	GeniusEye 310
+sonixb          0c45:6028	Sonix Btc Pc380
+sonixb          0c45:6029	spcaCam@150
+sonixb          0c45:602a	Meade ETX-105EC Camera
+sonixb          0c45:602c	Generic Sonix OV7630
+sonixb          0c45:602d	LIC-200 LG
+sonixb          0c45:602e	Genius VideoCam Messenger
+sonixj          0c45:6040	Speed NVC 350K
+sonixj          0c45:607c	Sonix sn9c102p Hv7131R
+sonixb          0c45:6083	VideoCAM Look
+sonixb          0c45:608c	VideoCAM Look
+sonixb          0c45:608f	PC Camera (SN9C103 + OV7630)
+sonixb          0c45:60a8	VideoCAM Look
+sonixb          0c45:60aa	VideoCAM Look
+sonixb          0c45:60af	VideoCAM Look
+sonixb          0c45:60b0	Genius VideoCam Look
+sonixj          0c45:60c0	Sangha Sn535
+sonixj          0c45:60ce	USB-PC-Camera-168 (TALK-5067)
+sonixj          0c45:60ec	SN9C105+MO4000
+sonixj          0c45:60fb	Surfer NoName
+sonixj          0c45:60fc	LG-LIC300
+sonixj          0c45:60fe	Microdia Audio
+sonixj          0c45:6100	PC Camera (SN9C128)
+sonixj          0c45:6102	PC Camera (SN9C128)
+sonixj          0c45:610a	PC Camera (SN9C128)
+sonixj          0c45:610b	PC Camera (SN9C128)
+sonixj          0c45:610c	PC Camera (SN9C128)
+sonixj          0c45:610e	PC Camera (SN9C128)
+sonixj          0c45:6128	Microdia/Sonix SNP325
+sonixj          0c45:612a	Avant Camera
+sonixj          0c45:612b	Speed-Link REFLECT2
+sonixj          0c45:612c	Typhoon Rasy Cam 1.3MPix
+sonixj          0c45:612e	PC Camera (SN9C110)
+sonixj          0c45:6130	Sonix Pccam
+sonixj          0c45:6138	Sn9c120 Mo4000
+sonixj          0c45:613a	Microdia Sonix PC Camera
+sonixj          0c45:613b	Surfer SN-206
+sonixj          0c45:613c	Sonix Pccam168
+sonixj          0c45:613e	PC Camera (SN9C120)
+sonixj          0c45:6142	Hama PC-Webcam AC-150
+sonixj          0c45:6143	Sonix Pccam168
+sonixj          0c45:6148	Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia
+sonixj          0c45:614a	Frontech E-Ccam (JIL-2225)
+sn9c20x         0c45:6240	PC Camera (SN9C201 + MT9M001)
+sn9c20x         0c45:6242	PC Camera (SN9C201 + MT9M111)
+sn9c20x         0c45:6248	PC Camera (SN9C201 + OV9655)
+sn9c20x         0c45:624c	PC Camera (SN9C201 + MT9M112)
+sn9c20x         0c45:624e	PC Camera (SN9C201 + SOI968)
+sn9c20x         0c45:624f	PC Camera (SN9C201 + OV9650)
+sn9c20x         0c45:6251	PC Camera (SN9C201 + OV9650)
+sn9c20x         0c45:6253	PC Camera (SN9C201 + OV9650)
+sn9c20x         0c45:6260	PC Camera (SN9C201 + OV7670)
+sn9c20x         0c45:6270	PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x         0c45:627b	PC Camera (SN9C201 + OV7660)
+sn9c20x         0c45:627c	PC Camera (SN9C201 + HV7131R)
+sn9c20x         0c45:627f	PC Camera (SN9C201 + OV9650)
+sn9c20x         0c45:6280	PC Camera (SN9C202 + MT9M001)
+sn9c20x         0c45:6282	PC Camera (SN9C202 + MT9M111)
+sn9c20x         0c45:6288	PC Camera (SN9C202 + OV9655)
+sn9c20x         0c45:628c	PC Camera (SN9C201 + MT9M112)
+sn9c20x         0c45:628e	PC Camera (SN9C202 + SOI968)
+sn9c20x         0c45:628f	PC Camera (SN9C202 + OV9650)
+sn9c20x         0c45:62a0	PC Camera (SN9C202 + OV7670)
+sn9c20x         0c45:62b0	PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x         0c45:62b3	PC Camera (SN9C202 + OV9655)
+sn9c20x         0c45:62bb	PC Camera (SN9C202 + OV7660)
+sn9c20x         0c45:62bc	PC Camera (SN9C202 + HV7131R)
+sn9c2028        0c45:8001	Wild Planet Digital Spy Camera
+sn9c2028        0c45:8003	Sakar #11199, #6637x, #67480 keychain cams
+sn9c2028        0c45:8008	Mini-Shotz ms-350
+sn9c2028        0c45:800a	Vivitar Vivicam 3350B
+sunplus         0d64:0303	Sunplus FashionCam DXG
+ov519           0e96:c001	TRUST 380 USB2 SPACEC@M
+etoms           102c:6151	Qcam Sangha CIF
+etoms           102c:6251	Qcam xxxxxx VGA
+ov519           1046:9967	W9967CF/W9968CF WebCam IC, Video Blaster WebCam Go
+zc3xx           10fd:0128	Typhoon Webshot II USB 300k 0x0128
+spca561         10fd:7e50	FlyCam Usb 100
+zc3xx           10fd:804d	Typhoon Webshot II Webcam [zc0301]
+zc3xx           10fd:8050	Typhoon Webshot II USB 300k
+ov534           1415:2000	Sony HD Eye for PS3 (SLEH 00201)
+pac207          145f:013a	Trust WB-1300N
+pac7302         145f:013c	Trust
+sn9c20x         145f:013d	Trust WB-3600R
+vc032x          15b8:6001	HP 2.0 Megapixel
+vc032x          15b8:6002	HP 2.0 Megapixel rz406aa
+stk1135         174f:6a31	ASUSlaptop, MT9M112 sensor
+spca501         1776:501c	Arowana 300K CMOS Camera
+t613            17a1:0128	TASCORP JPEG Webcam, NGS Cyclops
+vc032x          17ef:4802	Lenovo Vc0323+MI1310_SOC
+pac7302         1ae7:2001	SpeedLinkSnappy Mic SL-6825-SBK
+pac207          2001:f115	D-Link DSB-C120
+sq905c          2770:9050	Disney pix micro (CIF)
+sq905c          2770:9051	Lego Bionicle
+sq905c          2770:9052	Disney pix micro 2 (VGA)
+sq905c          2770:905c	All 11 known cameras with this ID
+sq905           2770:9120	All 24 known cameras with this ID
+sq905c          2770:913d	All 4 known cameras with this ID
+sq930x          2770:930b	Sweex Motion Tracking / I-Tec iCam Tracer
+sq930x          2770:930c	Trust WB-3500T / NSG Robbie 2.0
+spca500         2899:012c	Toptro Industrial
+ov519           8020:ef04	ov519
+spca508         8086:0110	Intel Easy PC Camera
+spca500         8086:0630	Intel Pocket PC Camera
+spca506         99fa:8988	Grandtec V.cap
+sn9c20x         a168:0610	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x         a168:0611	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x         a168:0613	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x         a168:0614	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x         a168:0615	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x         a168:0617	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x         a168:0618	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+spca561         abcd:cdee	Petcam
+=========	=========	===================================================================
diff --git a/Documentation/admin-guide/media/imx.rst b/Documentation/admin-guide/media/imx.rst
new file mode 100644
index 000000000000..b8fa70f854fd
--- /dev/null
+++ b/Documentation/admin-guide/media/imx.rst
@@ -0,0 +1,714 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+i.MX Video Capture Driver
+=========================
+
+Introduction
+------------
+
+The Freescale i.MX5/6 contains an Image Processing Unit (IPU), which
+handles the flow of image frames to and from capture devices and
+display devices.
+
+For image capture, the IPU contains the following internal subunits:
+
+- Image DMA Controller (IDMAC)
+- Camera Serial Interface (CSI)
+- Image Converter (IC)
+- Sensor Multi-FIFO Controller (SMFC)
+- Image Rotator (IRT)
+- Video De-Interlacing or Combining Block (VDIC)
+
+The IDMAC is the DMA controller for transfer of image frames to and from
+memory. Various dedicated DMA channels exist for both video capture and
+display paths. During transfer, the IDMAC is also capable of vertical
+image flip, 8x8 block transfer (see IRT description), pixel component
+re-ordering (for example UYVY to YUYV) within the same colorspace, and
+packed <--> planar conversion. The IDMAC can also perform a simple
+de-interlacing by interweaving even and odd lines during transfer
+(without motion compensation which requires the VDIC).
+
+The CSI is the backend capture unit that interfaces directly with
+camera sensors over Parallel, BT.656/1120, and MIPI CSI-2 buses.
+
+The IC handles color-space conversion, resizing (downscaling and
+upscaling), horizontal flip, and 90/270 degree rotation operations.
+
+There are three independent "tasks" within the IC that can carry out
+conversions concurrently: pre-process encoding, pre-process viewfinder,
+and post-processing. Within each task, conversions are split into three
+sections: downsizing section, main section (upsizing, flip, colorspace
+conversion, and graphics plane combining), and rotation section.
+
+The IPU time-shares the IC task operations. The time-slice granularity
+is one burst of eight pixels in the downsizing section, one image line
+in the main processing section, one image frame in the rotation section.
+
+The SMFC is composed of four independent FIFOs that each can transfer
+captured frames from sensors directly to memory concurrently via four
+IDMAC channels.
+
+The IRT carries out 90 and 270 degree image rotation operations. The
+rotation operation is carried out on 8x8 pixel blocks at a time. This
+operation is supported by the IDMAC which handles the 8x8 block transfer
+along with block reordering, in coordination with vertical flip.
+
+The VDIC handles the conversion of interlaced video to progressive, with
+support for different motion compensation modes (low, medium, and high
+motion). The deinterlaced output frames from the VDIC can be sent to the
+IC pre-process viewfinder task for further conversions. The VDIC also
+contains a Combiner that combines two image planes, with alpha blending
+and color keying.
+
+In addition to the IPU internal subunits, there are also two units
+outside the IPU that are also involved in video capture on i.MX:
+
+- MIPI CSI-2 Receiver for camera sensors with the MIPI CSI-2 bus
+  interface. This is a Synopsys DesignWare core.
+- Two video multiplexers for selecting among multiple sensor inputs
+  to send to a CSI.
+
+For more info, refer to the latest versions of the i.MX5/6 reference
+manuals [#f1]_ and [#f2]_.
+
+
+Features
+--------
+
+Some of the features of this driver include:
+
+- Many different pipelines can be configured via media controller API,
+  that correspond to the hardware video capture pipelines supported in
+  the i.MX.
+
+- Supports parallel, BT.565, and MIPI CSI-2 interfaces.
+
+- Concurrent independent streams, by configuring pipelines to multiple
+  video capture interfaces using independent entities.
+
+- Scaling, color-space conversion, horizontal and vertical flip, and
+  image rotation via IC task subdevs.
+
+- Many pixel formats supported (RGB, packed and planar YUV, partial
+  planar YUV).
+
+- The VDIC subdev supports motion compensated de-interlacing, with three
+  motion compensation modes: low, medium, and high motion. Pipelines are
+  defined that allow sending frames to the VDIC subdev directly from the
+  CSI. There is also support in the future for sending frames to the
+  VDIC from memory buffers via a output/mem2mem devices.
+
+- Includes a Frame Interval Monitor (FIM) that can correct vertical sync
+  problems with the ADV718x video decoders.
+
+
+Topology
+--------
+
+The following shows the media topologies for the i.MX6Q SabreSD and
+i.MX6Q SabreAuto. Refer to these diagrams in the entity descriptions
+in the next section.
+
+The i.MX5/6 topologies can differ upstream from the IPUv3 CSI video
+multiplexers, but the internal IPUv3 topology downstream from there
+is common to all i.MX5/6 platforms. For example, the SabreSD, with the
+MIPI CSI-2 OV5640 sensor, requires the i.MX6 MIPI CSI-2 receiver. But
+the SabreAuto has only the ADV7180 decoder on a parallel bt.656 bus, and
+therefore does not require the MIPI CSI-2 receiver, so it is missing in
+its graph.
+
+.. _imx6q_topology_graph:
+
+.. kernel-figure:: imx6q-sabresd.dot
+    :alt:   Diagram of the i.MX6Q SabreSD media pipeline topology
+    :align: center
+
+    Media pipeline graph on i.MX6Q SabreSD
+
+.. kernel-figure:: imx6q-sabreauto.dot
+    :alt:   Diagram of the i.MX6Q SabreAuto media pipeline topology
+    :align: center
+
+    Media pipeline graph on i.MX6Q SabreAuto
+
+Entities
+--------
+
+imx6-mipi-csi2
+--------------
+
+This is the MIPI CSI-2 receiver entity. It has one sink pad to receive
+the MIPI CSI-2 stream (usually from a MIPI CSI-2 camera sensor). It has
+four source pads, corresponding to the four MIPI CSI-2 demuxed virtual
+channel outputs. Multiple source pads can be enabled to independently
+stream from multiple virtual channels.
+
+This entity actually consists of two sub-blocks. One is the MIPI CSI-2
+core. This is a Synopsys Designware MIPI CSI-2 core. The other sub-block
+is a "CSI-2 to IPU gasket". The gasket acts as a demultiplexer of the
+four virtual channels streams, providing four separate parallel buses
+containing each virtual channel that are routed to CSIs or video
+multiplexers as described below.
+
+On i.MX6 solo/dual-lite, all four virtual channel buses are routed to
+two video multiplexers. Both CSI0 and CSI1 can receive any virtual
+channel, as selected by the video multiplexers.
+
+On i.MX6 Quad, virtual channel 0 is routed to IPU1-CSI0 (after selected
+by a video mux), virtual channels 1 and 2 are hard-wired to IPU1-CSI1
+and IPU2-CSI0, respectively, and virtual channel 3 is routed to
+IPU2-CSI1 (again selected by a video mux).
+
+ipuX_csiY_mux
+-------------
+
+These are the video multiplexers. They have two or more sink pads to
+select from either camera sensors with a parallel interface, or from
+MIPI CSI-2 virtual channels from imx6-mipi-csi2 entity. They have a
+single source pad that routes to a CSI (ipuX_csiY entities).
+
+On i.MX6 solo/dual-lite, there are two video mux entities. One sits
+in front of IPU1-CSI0 to select between a parallel sensor and any of
+the four MIPI CSI-2 virtual channels (a total of five sink pads). The
+other mux sits in front of IPU1-CSI1, and again has five sink pads to
+select between a parallel sensor and any of the four MIPI CSI-2 virtual
+channels.
+
+On i.MX6 Quad, there are two video mux entities. One sits in front of
+IPU1-CSI0 to select between a parallel sensor and MIPI CSI-2 virtual
+channel 0 (two sink pads). The other mux sits in front of IPU2-CSI1 to
+select between a parallel sensor and MIPI CSI-2 virtual channel 3 (two
+sink pads).
+
+ipuX_csiY
+---------
+
+These are the CSI entities. They have a single sink pad receiving from
+either a video mux or from a MIPI CSI-2 virtual channel as described
+above.
+
+This entity has two source pads. The first source pad can link directly
+to the ipuX_vdic entity or the ipuX_ic_prp entity, using hardware links
+that require no IDMAC memory buffer transfer.
+
+When the direct source pad is routed to the ipuX_ic_prp entity, frames
+from the CSI can be processed by one or both of the IC pre-processing
+tasks.
+
+When the direct source pad is routed to the ipuX_vdic entity, the VDIC
+will carry out motion-compensated de-interlace using "high motion" mode
+(see description of ipuX_vdic entity).
+
+The second source pad sends video frames directly to memory buffers
+via the SMFC and an IDMAC channel, bypassing IC pre-processing. This
+source pad is routed to a capture device node, with a node name of the
+format "ipuX_csiY capture".
+
+Note that since the IDMAC source pad makes use of an IDMAC channel,
+pixel reordering within the same colorspace can be carried out by the
+IDMAC channel. For example, if the CSI sink pad is receiving in UYVY
+order, the capture device linked to the IDMAC source pad can capture
+in YUYV order. Also, if the CSI sink pad is receiving a packed YUV
+format, the capture device can capture a planar YUV format such as
+YUV420.
+
+The IDMAC channel at the IDMAC source pad also supports simple
+interweave without motion compensation, which is activated if the source
+pad's field type is sequential top-bottom or bottom-top, and the
+requested capture interface field type is set to interlaced (t-b, b-t,
+or unqualified interlaced). The capture interface will enforce the same
+field order as the source pad field order (interlaced-bt if source pad
+is seq-bt, interlaced-tb if source pad is seq-tb).
+
+For events produced by ipuX_csiY, see ref:`imx_api_ipuX_csiY`.
+
+Cropping in ipuX_csiY
+---------------------
+
+The CSI supports cropping the incoming raw sensor frames. This is
+implemented in the ipuX_csiY entities at the sink pad, using the
+crop selection subdev API.
+
+The CSI also supports fixed divide-by-two downscaling independently in
+width and height. This is implemented in the ipuX_csiY entities at
+the sink pad, using the compose selection subdev API.
+
+The output rectangle at the ipuX_csiY source pad is the same as
+the compose rectangle at the sink pad. So the source pad rectangle
+cannot be negotiated, it must be set using the compose selection
+API at sink pad (if /2 downscale is desired, otherwise source pad
+rectangle is equal to incoming rectangle).
+
+To give an example of crop and /2 downscale, this will crop a
+1280x960 input frame to 640x480, and then /2 downscale in both
+dimensions to 320x240 (assumes ipu1_csi0 is linked to ipu1_csi0_mux):
+
+.. code-block:: none
+
+   media-ctl -V "'ipu1_csi0_mux':2[fmt:UYVY2X8/1280x960]"
+   media-ctl -V "'ipu1_csi0':0[crop:(0,0)/640x480]"
+   media-ctl -V "'ipu1_csi0':0[compose:(0,0)/320x240]"
+
+Frame Skipping in ipuX_csiY
+---------------------------
+
+The CSI supports frame rate decimation, via frame skipping. Frame
+rate decimation is specified by setting the frame intervals at
+sink and source pads. The ipuX_csiY entity then applies the best
+frame skip setting to the CSI to achieve the desired frame rate
+at the source pad.
+
+The following example reduces an assumed incoming 60 Hz frame
+rate by half at the IDMAC output source pad:
+
+.. code-block:: none
+
+   media-ctl -V "'ipu1_csi0':0[fmt:UYVY2X8/640x480@1/60]"
+   media-ctl -V "'ipu1_csi0':2[fmt:UYVY2X8/640x480@1/30]"
+
+Frame Interval Monitor in ipuX_csiY
+-----------------------------------
+
+See ref:`imx_api_FIM`.
+
+ipuX_vdic
+---------
+
+The VDIC carries out motion compensated de-interlacing, with three
+motion compensation modes: low, medium, and high motion. The mode is
+specified with the menu control V4L2_CID_DEINTERLACING_MODE. The VDIC
+has two sink pads and a single source pad.
+
+The direct sink pad receives from an ipuX_csiY direct pad. With this
+link the VDIC can only operate in high motion mode.
+
+When the IDMAC sink pad is activated, it receives from an output
+or mem2mem device node. With this pipeline, the VDIC can also operate
+in low and medium modes, because these modes require receiving
+frames from memory buffers. Note that an output or mem2mem device
+is not implemented yet, so this sink pad currently has no links.
+
+The source pad routes to the IC pre-processing entity ipuX_ic_prp.
+
+ipuX_ic_prp
+-----------
+
+This is the IC pre-processing entity. It acts as a router, routing
+data from its sink pad to one or both of its source pads.
+
+This entity has a single sink pad. The sink pad can receive from the
+ipuX_csiY direct pad, or from ipuX_vdic.
+
+This entity has two source pads. One source pad routes to the
+pre-process encode task entity (ipuX_ic_prpenc), the other to the
+pre-process viewfinder task entity (ipuX_ic_prpvf). Both source pads
+can be activated at the same time if the sink pad is receiving from
+ipuX_csiY. Only the source pad to the pre-process viewfinder task entity
+can be activated if the sink pad is receiving from ipuX_vdic (frames
+from the VDIC can only be processed by the pre-process viewfinder task).
+
+ipuX_ic_prpenc
+--------------
+
+This is the IC pre-processing encode entity. It has a single sink
+pad from ipuX_ic_prp, and a single source pad. The source pad is
+routed to a capture device node, with a node name of the format
+"ipuX_ic_prpenc capture".
+
+This entity performs the IC pre-process encode task operations:
+color-space conversion, resizing (downscaling and upscaling),
+horizontal and vertical flip, and 90/270 degree rotation. Flip
+and rotation are provided via standard V4L2 controls.
+
+Like the ipuX_csiY IDMAC source, this entity also supports simple
+de-interlace without motion compensation, and pixel reordering.
+
+ipuX_ic_prpvf
+-------------
+
+This is the IC pre-processing viewfinder entity. It has a single sink
+pad from ipuX_ic_prp, and a single source pad. The source pad is routed
+to a capture device node, with a node name of the format
+"ipuX_ic_prpvf capture".
+
+This entity is identical in operation to ipuX_ic_prpenc, with the same
+resizing and CSC operations and flip/rotation controls. It will receive
+and process de-interlaced frames from the ipuX_vdic if ipuX_ic_prp is
+receiving from ipuX_vdic.
+
+Like the ipuX_csiY IDMAC source, this entity supports simple
+interweaving without motion compensation. However, note that if the
+ipuX_vdic is included in the pipeline (ipuX_ic_prp is receiving from
+ipuX_vdic), it's not possible to use interweave in ipuX_ic_prpvf,
+since the ipuX_vdic has already carried out de-interlacing (with
+motion compensation) and therefore the field type output from
+ipuX_vdic can only be none (progressive).
+
+Capture Pipelines
+-----------------
+
+The following describe the various use-cases supported by the pipelines.
+
+The links shown do not include the backend sensor, video mux, or mipi
+csi-2 receiver links. This depends on the type of sensor interface
+(parallel or mipi csi-2). So these pipelines begin with:
+
+sensor -> ipuX_csiY_mux -> ...
+
+for parallel sensors, or:
+
+sensor -> imx6-mipi-csi2 -> (ipuX_csiY_mux) -> ...
+
+for mipi csi-2 sensors. The imx6-mipi-csi2 receiver may need to route
+to the video mux (ipuX_csiY_mux) before sending to the CSI, depending
+on the mipi csi-2 virtual channel, hence ipuX_csiY_mux is shown in
+parenthesis.
+
+Unprocessed Video Capture:
+--------------------------
+
+Send frames directly from sensor to camera device interface node, with
+no conversions, via ipuX_csiY IDMAC source pad:
+
+-> ipuX_csiY:2 -> ipuX_csiY capture
+
+IC Direct Conversions:
+----------------------
+
+This pipeline uses the preprocess encode entity to route frames directly
+from the CSI to the IC, to carry out scaling up to 1024x1024 resolution,
+CSC, flipping, and image rotation:
+
+-> ipuX_csiY:1 -> 0:ipuX_ic_prp:1 -> 0:ipuX_ic_prpenc:1 -> ipuX_ic_prpenc capture
+
+Motion Compensated De-interlace:
+--------------------------------
+
+This pipeline routes frames from the CSI direct pad to the VDIC entity to
+support motion-compensated de-interlacing (high motion mode only),
+scaling up to 1024x1024, CSC, flip, and rotation:
+
+-> ipuX_csiY:1 -> 0:ipuX_vdic:2 -> 0:ipuX_ic_prp:2 -> 0:ipuX_ic_prpvf:1 -> ipuX_ic_prpvf capture
+
+
+Usage Notes
+-----------
+
+To aid in configuration and for backward compatibility with V4L2
+applications that access controls only from video device nodes, the
+capture device interfaces inherit controls from the active entities
+in the current pipeline, so controls can be accessed either directly
+from the subdev or from the active capture device interface. For
+example, the FIM controls are available either from the ipuX_csiY
+subdevs or from the active capture device.
+
+The following are specific usage notes for the Sabre* reference
+boards:
+
+
+i.MX6Q SabreLite with OV5642 and OV5640
+---------------------------------------
+
+This platform requires the OmniVision OV5642 module with a parallel
+camera interface, and the OV5640 module with a MIPI CSI-2
+interface. Both modules are available from Boundary Devices:
+
+- https://boundarydevices.com/product/nit6x_5mp
+- https://boundarydevices.com/product/nit6x_5mp_mipi
+
+Note that if only one camera module is available, the other sensor
+node can be disabled in the device tree.
+
+The OV5642 module is connected to the parallel bus input on the i.MX
+internal video mux to IPU1 CSI0. It's i2c bus connects to i2c bus 2.
+
+The MIPI CSI-2 OV5640 module is connected to the i.MX internal MIPI CSI-2
+receiver, and the four virtual channel outputs from the receiver are
+routed as follows: vc0 to the IPU1 CSI0 mux, vc1 directly to IPU1 CSI1,
+vc2 directly to IPU2 CSI0, and vc3 to the IPU2 CSI1 mux. The OV5640 is
+also connected to i2c bus 2 on the SabreLite, therefore the OV5642 and
+OV5640 must not share the same i2c slave address.
+
+The following basic example configures unprocessed video capture
+pipelines for both sensors. The OV5642 is routed to ipu1_csi0, and
+the OV5640, transmitting on MIPI CSI-2 virtual channel 1 (which is
+imx6-mipi-csi2 pad 2), is routed to ipu1_csi1. Both sensors are
+configured to output 640x480, and the OV5642 outputs YUYV2X8, the
+OV5640 UYVY2X8:
+
+.. code-block:: none
+
+   # Setup links for OV5642
+   media-ctl -l "'ov5642 1-0042':0 -> 'ipu1_csi0_mux':1[1]"
+   media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]"
+   media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]"
+   # Setup links for OV5640
+   media-ctl -l "'ov5640 1-0040':0 -> 'imx6-mipi-csi2':0[1]"
+   media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
+   media-ctl -l "'ipu1_csi1':2 -> 'ipu1_csi1 capture':0[1]"
+   # Configure pads for OV5642 pipeline
+   media-ctl -V "'ov5642 1-0042':0 [fmt:YUYV2X8/640x480 field:none]"
+   media-ctl -V "'ipu1_csi0_mux':2 [fmt:YUYV2X8/640x480 field:none]"
+   media-ctl -V "'ipu1_csi0':2 [fmt:AYUV32/640x480 field:none]"
+   # Configure pads for OV5640 pipeline
+   media-ctl -V "'ov5640 1-0040':0 [fmt:UYVY2X8/640x480 field:none]"
+   media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
+   media-ctl -V "'ipu1_csi1':2 [fmt:AYUV32/640x480 field:none]"
+
+Streaming can then begin independently on the capture device nodes
+"ipu1_csi0 capture" and "ipu1_csi1 capture". The v4l2-ctl tool can
+be used to select any supported YUV pixelformat on the capture device
+nodes, including planar.
+
+i.MX6Q SabreAuto with ADV7180 decoder
+-------------------------------------
+
+On the i.MX6Q SabreAuto, an on-board ADV7180 SD decoder is connected to the
+parallel bus input on the internal video mux to IPU1 CSI0.
+
+The following example configures a pipeline to capture from the ADV7180
+video decoder, assuming NTSC 720x480 input signals, using simple
+interweave (unconverted and without motion compensation). The adv7180
+must output sequential or alternating fields (field type 'seq-bt' for
+NTSC, or 'alternate'):
+
+.. code-block:: none
+
+   # Setup links
+   media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]"
+   media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]"
+   media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]"
+   # Configure pads
+   media-ctl -V "'adv7180 3-0021':0 [fmt:UYVY2X8/720x480 field:seq-bt]"
+   media-ctl -V "'ipu1_csi0_mux':2 [fmt:UYVY2X8/720x480]"
+   media-ctl -V "'ipu1_csi0':2 [fmt:AYUV32/720x480]"
+   # Configure "ipu1_csi0 capture" interface (assumed at /dev/video4)
+   v4l2-ctl -d4 --set-fmt-video=field=interlaced_bt
+
+Streaming can then begin on /dev/video4. The v4l2-ctl tool can also be
+used to select any supported YUV pixelformat on /dev/video4.
+
+This example configures a pipeline to capture from the ADV7180
+video decoder, assuming PAL 720x576 input signals, with Motion
+Compensated de-interlacing. The adv7180 must output sequential or
+alternating fields (field type 'seq-tb' for PAL, or 'alternate').
+
+.. code-block:: none
+
+   # Setup links
+   media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]"
+   media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]"
+   media-ctl -l "'ipu1_csi0':1 -> 'ipu1_vdic':0[1]"
+   media-ctl -l "'ipu1_vdic':2 -> 'ipu1_ic_prp':0[1]"
+   media-ctl -l "'ipu1_ic_prp':2 -> 'ipu1_ic_prpvf':0[1]"
+   media-ctl -l "'ipu1_ic_prpvf':1 -> 'ipu1_ic_prpvf capture':0[1]"
+   # Configure pads
+   media-ctl -V "'adv7180 3-0021':0 [fmt:UYVY2X8/720x576 field:seq-tb]"
+   media-ctl -V "'ipu1_csi0_mux':2 [fmt:UYVY2X8/720x576]"
+   media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]"
+   media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]"
+   media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]"
+   media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]"
+   # Configure "ipu1_ic_prpvf capture" interface (assumed at /dev/video2)
+   v4l2-ctl -d2 --set-fmt-video=field=none
+
+Streaming can then begin on /dev/video2. The v4l2-ctl tool can also be
+used to select any supported YUV pixelformat on /dev/video2.
+
+This platform accepts Composite Video analog inputs to the ADV7180 on
+Ain1 (connector J42).
+
+i.MX6DL SabreAuto with ADV7180 decoder
+--------------------------------------
+
+On the i.MX6DL SabreAuto, an on-board ADV7180 SD decoder is connected to the
+parallel bus input on the internal video mux to IPU1 CSI0.
+
+The following example configures a pipeline to capture from the ADV7180
+video decoder, assuming NTSC 720x480 input signals, using simple
+interweave (unconverted and without motion compensation). The adv7180
+must output sequential or alternating fields (field type 'seq-bt' for
+NTSC, or 'alternate'):
+
+.. code-block:: none
+
+   # Setup links
+   media-ctl -l "'adv7180 4-0021':0 -> 'ipu1_csi0_mux':4[1]"
+   media-ctl -l "'ipu1_csi0_mux':5 -> 'ipu1_csi0':0[1]"
+   media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]"
+   # Configure pads
+   media-ctl -V "'adv7180 4-0021':0 [fmt:UYVY2X8/720x480 field:seq-bt]"
+   media-ctl -V "'ipu1_csi0_mux':5 [fmt:UYVY2X8/720x480]"
+   media-ctl -V "'ipu1_csi0':2 [fmt:AYUV32/720x480]"
+   # Configure "ipu1_csi0 capture" interface (assumed at /dev/video0)
+   v4l2-ctl -d0 --set-fmt-video=field=interlaced_bt
+
+Streaming can then begin on /dev/video0. The v4l2-ctl tool can also be
+used to select any supported YUV pixelformat on /dev/video0.
+
+This example configures a pipeline to capture from the ADV7180
+video decoder, assuming PAL 720x576 input signals, with Motion
+Compensated de-interlacing. The adv7180 must output sequential or
+alternating fields (field type 'seq-tb' for PAL, or 'alternate').
+
+.. code-block:: none
+
+   # Setup links
+   media-ctl -l "'adv7180 4-0021':0 -> 'ipu1_csi0_mux':4[1]"
+   media-ctl -l "'ipu1_csi0_mux':5 -> 'ipu1_csi0':0[1]"
+   media-ctl -l "'ipu1_csi0':1 -> 'ipu1_vdic':0[1]"
+   media-ctl -l "'ipu1_vdic':2 -> 'ipu1_ic_prp':0[1]"
+   media-ctl -l "'ipu1_ic_prp':2 -> 'ipu1_ic_prpvf':0[1]"
+   media-ctl -l "'ipu1_ic_prpvf':1 -> 'ipu1_ic_prpvf capture':0[1]"
+   # Configure pads
+   media-ctl -V "'adv7180 4-0021':0 [fmt:UYVY2X8/720x576 field:seq-tb]"
+   media-ctl -V "'ipu1_csi0_mux':5 [fmt:UYVY2X8/720x576]"
+   media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]"
+   media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]"
+   media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]"
+   media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]"
+   # Configure "ipu1_ic_prpvf capture" interface (assumed at /dev/video2)
+   v4l2-ctl -d2 --set-fmt-video=field=none
+
+Streaming can then begin on /dev/video2. The v4l2-ctl tool can also be
+used to select any supported YUV pixelformat on /dev/video2.
+
+This platform accepts Composite Video analog inputs to the ADV7180 on
+Ain1 (connector J42).
+
+i.MX6Q SabreSD with MIPI CSI-2 OV5640
+-------------------------------------
+
+Similarly to i.MX6Q SabreLite, the i.MX6Q SabreSD supports a parallel
+interface OV5642 module on IPU1 CSI0, and a MIPI CSI-2 OV5640
+module. The OV5642 connects to i2c bus 1 and the OV5640 to i2c bus 2.
+
+The device tree for SabreSD includes OF graphs for both the parallel
+OV5642 and the MIPI CSI-2 OV5640, but as of this writing only the MIPI
+CSI-2 OV5640 has been tested, so the OV5642 node is currently disabled.
+The OV5640 module connects to MIPI connector J5. The NXP part number
+for the OV5640 module that connects to the SabreSD board is H120729.
+
+The following example configures unprocessed video capture pipeline to
+capture from the OV5640, transmitting on MIPI CSI-2 virtual channel 0:
+
+.. code-block:: none
+
+   # Setup links
+   media-ctl -l "'ov5640 1-003c':0 -> 'imx6-mipi-csi2':0[1]"
+   media-ctl -l "'imx6-mipi-csi2':1 -> 'ipu1_csi0_mux':0[1]"
+   media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]"
+   media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]"
+   # Configure pads
+   media-ctl -V "'ov5640 1-003c':0 [fmt:UYVY2X8/640x480]"
+   media-ctl -V "'imx6-mipi-csi2':1 [fmt:UYVY2X8/640x480]"
+   media-ctl -V "'ipu1_csi0_mux':0 [fmt:UYVY2X8/640x480]"
+   media-ctl -V "'ipu1_csi0':0 [fmt:AYUV32/640x480]"
+
+Streaming can then begin on "ipu1_csi0 capture" node. The v4l2-ctl
+tool can be used to select any supported pixelformat on the capture
+device node.
+
+To determine what is the /dev/video node correspondent to
+"ipu1_csi0 capture":
+
+.. code-block:: none
+
+   media-ctl -e "ipu1_csi0 capture"
+   /dev/video0
+
+/dev/video0 is the streaming element in this case.
+
+Starting the streaming via v4l2-ctl:
+
+.. code-block:: none
+
+   v4l2-ctl --stream-mmap -d /dev/video0
+
+Starting the streaming via Gstreamer and sending the content to the display:
+
+.. code-block:: none
+
+   gst-launch-1.0 v4l2src device=/dev/video0 ! kmssink
+
+The following example configures a direct conversion pipeline to capture
+from the OV5640, transmitting on MIPI CSI-2 virtual channel 0. It also
+shows colorspace conversion and scaling at IC output.
+
+.. code-block:: none
+
+   # Setup links
+   media-ctl -l "'ov5640 1-003c':0 -> 'imx6-mipi-csi2':0[1]"
+   media-ctl -l "'imx6-mipi-csi2':1 -> 'ipu1_csi0_mux':0[1]"
+   media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]"
+   media-ctl -l "'ipu1_csi0':1 -> 'ipu1_ic_prp':0[1]"
+   media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
+   media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
+   # Configure pads
+   media-ctl -V "'ov5640 1-003c':0 [fmt:UYVY2X8/640x480]"
+   media-ctl -V "'imx6-mipi-csi2':1 [fmt:UYVY2X8/640x480]"
+   media-ctl -V "'ipu1_csi0_mux':2 [fmt:UYVY2X8/640x480]"
+   media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/640x480]"
+   media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480]"
+   media-ctl -V "'ipu1_ic_prpenc':1 [fmt:ARGB8888_1X32/800x600]"
+   # Set a format at the capture interface
+   v4l2-ctl -d /dev/video1 --set-fmt-video=pixelformat=RGB3
+
+Streaming can then begin on "ipu1_ic_prpenc capture" node.
+
+To determine what is the /dev/video node correspondent to
+"ipu1_ic_prpenc capture":
+
+.. code-block:: none
+
+   media-ctl -e "ipu1_ic_prpenc capture"
+   /dev/video1
+
+
+/dev/video1 is the streaming element in this case.
+
+Starting the streaming via v4l2-ctl:
+
+.. code-block:: none
+
+   v4l2-ctl --stream-mmap -d /dev/video1
+
+Starting the streaming via Gstreamer and sending the content to the display:
+
+.. code-block:: none
+
+   gst-launch-1.0 v4l2src device=/dev/video1 ! kmssink
+
+Known Issues
+------------
+
+1. When using 90 or 270 degree rotation control at capture resolutions
+   near the IC resizer limit of 1024x1024, and combined with planar
+   pixel formats (YUV420, YUV422p), frame capture will often fail with
+   no end-of-frame interrupts from the IDMAC channel. To work around
+   this, use lower resolution and/or packed formats (YUYV, RGB3, etc.)
+   when 90 or 270 rotations are needed.
+
+
+File list
+---------
+
+drivers/staging/media/imx/
+include/media/imx.h
+include/linux/imx-media.h
+
+References
+----------
+
+.. [#f1] http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
+.. [#f2] http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6SDLRM.pdf
+
+
+Authors
+-------
+
+- Steve Longerbeam <steve_longerbeam@mentor.com>
+- Philipp Zabel <kernel@pengutronix.de>
+- Russell King <linux@armlinux.org.uk>
+
+Copyright (C) 2012-2017 Mentor Graphics Inc.
diff --git a/Documentation/admin-guide/media/imx6q-sabreauto.dot b/Documentation/admin-guide/media/imx6q-sabreauto.dot
new file mode 100644
index 000000000000..bd6cf0b358c0
--- /dev/null
+++ b/Documentation/admin-guide/media/imx6q-sabreauto.dot
@@ -0,0 +1,51 @@
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{<port0> 0} | ipu1_csi0\n/dev/v4l-subdev0 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port2 -> n00000005 [style=dashed]
+	n00000001:port1 -> n0000000f:port0 [style=dashed]
+	n00000001:port1 -> n0000000b:port0 [style=dashed]
+	n00000005 [label="ipu1_csi0 capture\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n0000000b [label="{{<port0> 0 | <port1> 1} | ipu1_vdic\n/dev/v4l-subdev1 | {<port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000b:port2 -> n0000000f:port0 [style=dashed]
+	n0000000f [label="{{<port0> 0} | ipu1_ic_prp\n/dev/v4l-subdev2 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000f:port1 -> n00000013:port0 [style=dashed]
+	n0000000f:port2 -> n0000001c:port0 [style=dashed]
+	n00000013 [label="{{<port0> 0} | ipu1_ic_prpenc\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000013:port1 -> n00000016 [style=dashed]
+	n00000016 [label="ipu1_ic_prpenc capture\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n0000001c [label="{{<port0> 0} | ipu1_ic_prpvf\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000001c:port1 -> n0000001f [style=dashed]
+	n0000001f [label="ipu1_ic_prpvf capture\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+	n0000002f [label="{{<port0> 0} | ipu1_csi1\n/dev/v4l-subdev5 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000002f:port2 -> n00000033 [style=dashed]
+	n0000002f:port1 -> n0000000f:port0 [style=dashed]
+	n0000002f:port1 -> n0000000b:port0 [style=dashed]
+	n00000033 [label="ipu1_csi1 capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+	n0000003d [label="{{<port0> 0} | ipu2_csi0\n/dev/v4l-subdev6 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000003d:port2 -> n00000041 [style=dashed]
+	n0000003d:port1 -> n0000004b:port0 [style=dashed]
+	n0000003d:port1 -> n00000047:port0 [style=dashed]
+	n00000041 [label="ipu2_csi0 capture\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
+	n00000047 [label="{{<port0> 0 | <port1> 1} | ipu2_vdic\n/dev/v4l-subdev7 | {<port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000047:port2 -> n0000004b:port0 [style=dashed]
+	n0000004b [label="{{<port0> 0} | ipu2_ic_prp\n/dev/v4l-subdev8 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000004b:port1 -> n0000004f:port0 [style=dashed]
+	n0000004b:port2 -> n00000058:port0 [style=dashed]
+	n0000004f [label="{{<port0> 0} | ipu2_ic_prpenc\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000004f:port1 -> n00000052 [style=dashed]
+	n00000052 [label="ipu2_ic_prpenc capture\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
+	n00000058 [label="{{<port0> 0} | ipu2_ic_prpvf\n/dev/v4l-subdev10 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000058:port1 -> n0000005b [style=dashed]
+	n0000005b [label="ipu2_ic_prpvf capture\n/dev/video6", shape=box, style=filled, fillcolor=yellow]
+	n0000006b [label="{{<port0> 0} | ipu2_csi1\n/dev/v4l-subdev11 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000006b:port2 -> n0000006f [style=dashed]
+	n0000006b:port1 -> n0000004b:port0 [style=dashed]
+	n0000006b:port1 -> n00000047:port0 [style=dashed]
+	n0000006f [label="ipu2_csi1 capture\n/dev/video7", shape=box, style=filled, fillcolor=yellow]
+	n00000079 [label="{{<port0> 0 | <port1> 1} | ipu1_csi0_mux\n/dev/v4l-subdev12 | {<port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000079:port2 -> n00000001:port0 [style=dashed]
+	n0000007d [label="{{<port0> 0 | <port1> 1} | ipu2_csi1_mux\n/dev/v4l-subdev13 | {<port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000007d:port2 -> n0000006b:port0 [style=dashed]
+	n00000081 [label="{{} | adv7180 3-0021\n/dev/v4l-subdev14 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000081:port0 -> n00000079:port1 [style=dashed]
+}
diff --git a/Documentation/admin-guide/media/imx6q-sabresd.dot b/Documentation/admin-guide/media/imx6q-sabresd.dot
new file mode 100644
index 000000000000..7d56cafa1944
--- /dev/null
+++ b/Documentation/admin-guide/media/imx6q-sabresd.dot
@@ -0,0 +1,56 @@
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{<port0> 0} | ipu1_csi0\n/dev/v4l-subdev0 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port2 -> n00000005 [style=dashed]
+	n00000001:port1 -> n0000000f:port0 [style=dashed]
+	n00000001:port1 -> n0000000b:port0 [style=dashed]
+	n00000005 [label="ipu1_csi0 capture\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n0000000b [label="{{<port0> 0 | <port1> 1} | ipu1_vdic\n/dev/v4l-subdev1 | {<port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000b:port2 -> n0000000f:port0 [style=dashed]
+	n0000000f [label="{{<port0> 0} | ipu1_ic_prp\n/dev/v4l-subdev2 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000f:port1 -> n00000013:port0 [style=dashed]
+	n0000000f:port2 -> n0000001c:port0 [style=dashed]
+	n00000013 [label="{{<port0> 0} | ipu1_ic_prpenc\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000013:port1 -> n00000016 [style=dashed]
+	n00000016 [label="ipu1_ic_prpenc capture\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n0000001c [label="{{<port0> 0} | ipu1_ic_prpvf\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000001c:port1 -> n0000001f [style=dashed]
+	n0000001f [label="ipu1_ic_prpvf capture\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+	n0000002f [label="{{<port0> 0} | ipu1_csi1\n/dev/v4l-subdev5 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000002f:port2 -> n00000033 [style=dashed]
+	n0000002f:port1 -> n0000000f:port0 [style=dashed]
+	n0000002f:port1 -> n0000000b:port0 [style=dashed]
+	n00000033 [label="ipu1_csi1 capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+	n0000003d [label="{{<port0> 0} | ipu2_csi0\n/dev/v4l-subdev6 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000003d:port2 -> n00000041 [style=dashed]
+	n0000003d:port1 -> n0000004b:port0 [style=dashed]
+	n0000003d:port1 -> n00000047:port0 [style=dashed]
+	n00000041 [label="ipu2_csi0 capture\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
+	n00000047 [label="{{<port0> 0 | <port1> 1} | ipu2_vdic\n/dev/v4l-subdev7 | {<port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000047:port2 -> n0000004b:port0 [style=dashed]
+	n0000004b [label="{{<port0> 0} | ipu2_ic_prp\n/dev/v4l-subdev8 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000004b:port1 -> n0000004f:port0 [style=dashed]
+	n0000004b:port2 -> n00000058:port0 [style=dashed]
+	n0000004f [label="{{<port0> 0} | ipu2_ic_prpenc\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000004f:port1 -> n00000052 [style=dashed]
+	n00000052 [label="ipu2_ic_prpenc capture\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
+	n00000058 [label="{{<port0> 0} | ipu2_ic_prpvf\n/dev/v4l-subdev10 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000058:port1 -> n0000005b [style=dashed]
+	n0000005b [label="ipu2_ic_prpvf capture\n/dev/video6", shape=box, style=filled, fillcolor=yellow]
+	n0000006b [label="{{<port0> 0} | ipu2_csi1\n/dev/v4l-subdev11 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000006b:port2 -> n0000006f [style=dashed]
+	n0000006b:port1 -> n0000004b:port0 [style=dashed]
+	n0000006b:port1 -> n00000047:port0 [style=dashed]
+	n0000006f [label="ipu2_csi1 capture\n/dev/video7", shape=box, style=filled, fillcolor=yellow]
+	n00000079 [label="{{<port0> 0} | imx6-mipi-csi2\n/dev/v4l-subdev12 | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000079:port2 -> n0000002f:port0 [style=dashed]
+	n00000079:port3 -> n0000003d:port0 [style=dashed]
+	n00000079:port1 -> n0000007f:port0 [style=dashed]
+	n00000079:port4 -> n00000083:port0 [style=dashed]
+	n0000007f [label="{{<port0> 0 | <port1> 1} | ipu1_csi0_mux\n/dev/v4l-subdev13 | {<port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000007f:port2 -> n00000001:port0 [style=dashed]
+	n00000083 [label="{{<port0> 0 | <port1> 1} | ipu2_csi1_mux\n/dev/v4l-subdev14 | {<port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000083:port2 -> n0000006b:port0 [style=dashed]
+	n00000087 [label="{{} | ov5640 1-003c\n/dev/v4l-subdev15 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000087:port0 -> n00000079:port0 [style=dashed]
+}
diff --git a/Documentation/admin-guide/media/imx7.rst b/Documentation/admin-guide/media/imx7.rst
new file mode 100644
index 000000000000..1e442c97da47
--- /dev/null
+++ b/Documentation/admin-guide/media/imx7.rst
@@ -0,0 +1,161 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+i.MX7 Video Capture Driver
+==========================
+
+Introduction
+------------
+
+The i.MX7 contrary to the i.MX5/6 family does not contain an Image Processing
+Unit (IPU); because of that the capabilities to perform operations or
+manipulation of the capture frames are less feature rich.
+
+For image capture the i.MX7 has three units:
+- CMOS Sensor Interface (CSI)
+- Video Multiplexer
+- MIPI CSI-2 Receiver
+
+.. code-block:: none
+
+   MIPI Camera Input ---> MIPI CSI-2 --- > |\
+                                           | \
+                                           |  \
+                                           | M |
+                                           | U | ------>  CSI ---> Capture
+                                           | X |
+                                           |  /
+   Parallel Camera Input ----------------> | /
+                                           |/
+
+For additional information, please refer to the latest versions of the i.MX7
+reference manual [#f1]_.
+
+Entities
+--------
+
+imx7-mipi-csi2
+--------------
+
+This is the MIPI CSI-2 receiver entity. It has one sink pad to receive the pixel
+data from MIPI CSI-2 camera sensor. It has one source pad, corresponding to the
+virtual channel 0. This module is compliant to previous version of Samsung
+D-phy, and supports two D-PHY Rx Data lanes.
+
+csi-mux
+-------
+
+This is the video multiplexer. It has two sink pads to select from either camera
+sensor with a parallel interface or from MIPI CSI-2 virtual channel 0.  It has
+a single source pad that routes to the CSI.
+
+csi
+---
+
+The CSI enables the chip to connect directly to external CMOS image sensor. CSI
+can interface directly with Parallel and MIPI CSI-2 buses. It has 256 x 64 FIFO
+to store received image pixel data and embedded DMA controllers to transfer data
+from the FIFO through AHB bus.
+
+This entity has one sink pad that receives from the csi-mux entity and a single
+source pad that routes video frames directly to memory buffers. This pad is
+routed to a capture device node.
+
+Usage Notes
+-----------
+
+To aid in configuration and for backward compatibility with V4L2 applications
+that access controls only from video device nodes, the capture device interfaces
+inherit controls from the active entities in the current pipeline, so controls
+can be accessed either directly from the subdev or from the active capture
+device interface. For example, the sensor controls are available either from the
+sensor subdevs or from the active capture device.
+
+Warp7 with OV2680
+-----------------
+
+On this platform an OV2680 MIPI CSI-2 module is connected to the internal MIPI
+CSI-2 receiver. The following example configures a video capture pipeline with
+an output of 800x600, and BGGR 10 bit bayer format:
+
+.. code-block:: none
+
+   # Setup links
+   media-ctl -l "'ov2680 1-0036':0 -> 'imx7-mipi-csis.0':0[1]"
+   media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi-mux':1[1]"
+   media-ctl -l "'csi-mux':2 -> 'csi':0[1]"
+   media-ctl -l "'csi':1 -> 'csi capture':0[1]"
+
+   # Configure pads for pipeline
+   media-ctl -V "'ov2680 1-0036':0 [fmt:SBGGR10_1X10/800x600 field:none]"
+   media-ctl -V "'csi-mux':1 [fmt:SBGGR10_1X10/800x600 field:none]"
+   media-ctl -V "'csi-mux':2 [fmt:SBGGR10_1X10/800x600 field:none]"
+   media-ctl -V "'imx7-mipi-csis.0':0 [fmt:SBGGR10_1X10/800x600 field:none]"
+   media-ctl -V "'csi':0 [fmt:SBGGR10_1X10/800x600 field:none]"
+
+After this streaming can start. The v4l2-ctl tool can be used to select any of
+the resolutions supported by the sensor.
+
+.. code-block:: none
+
+	# media-ctl -p
+	Media controller API version 5.2.0
+
+	Media device information
+	------------------------
+	driver          imx7-csi
+	model           imx-media
+	serial
+	bus info
+	hw revision     0x0
+	driver version  5.2.0
+
+	Device topology
+	- entity 1: csi (2 pads, 2 links)
+	            type V4L2 subdev subtype Unknown flags 0
+	            device node name /dev/v4l-subdev0
+	        pad0: Sink
+	                [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
+	                <- "csi-mux":2 [ENABLED]
+	        pad1: Source
+	                [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
+	                -> "csi capture":0 [ENABLED]
+
+	- entity 4: csi capture (1 pad, 1 link)
+	            type Node subtype V4L flags 0
+	            device node name /dev/video0
+	        pad0: Sink
+	                <- "csi":1 [ENABLED]
+
+	- entity 10: csi-mux (3 pads, 2 links)
+	             type V4L2 subdev subtype Unknown flags 0
+	             device node name /dev/v4l-subdev1
+	        pad0: Sink
+	                [fmt:Y8_1X8/1x1 field:none]
+	        pad1: Sink
+	               [fmt:SBGGR10_1X10/800x600 field:none]
+	                <- "imx7-mipi-csis.0":1 [ENABLED]
+	        pad2: Source
+	                [fmt:SBGGR10_1X10/800x600 field:none]
+	                -> "csi":0 [ENABLED]
+
+	- entity 14: imx7-mipi-csis.0 (2 pads, 2 links)
+	             type V4L2 subdev subtype Unknown flags 0
+	             device node name /dev/v4l-subdev2
+	        pad0: Sink
+	                [fmt:SBGGR10_1X10/800x600 field:none]
+	                <- "ov2680 1-0036":0 [ENABLED]
+	        pad1: Source
+	                [fmt:SBGGR10_1X10/800x600 field:none]
+	                -> "csi-mux":1 [ENABLED]
+
+	- entity 17: ov2680 1-0036 (1 pad, 1 link)
+	             type V4L2 subdev subtype Sensor flags 0
+	             device node name /dev/v4l-subdev3
+	        pad0: Source
+	                [fmt:SBGGR10_1X10/800x600@1/30 field:none colorspace:srgb]
+	                -> "imx7-mipi-csis.0":0 [ENABLED]
+
+References
+----------
+
+.. [#f1] https://www.nxp.com/docs/en/reference-manual/IMX7SRM.pdf
diff --git a/Documentation/admin-guide/media/index.rst b/Documentation/admin-guide/media/index.rst
new file mode 100644
index 000000000000..6e0d2bae7154
--- /dev/null
+++ b/Documentation/admin-guide/media/index.rst
@@ -0,0 +1,61 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+====================================
+Media subsystem admin and user guide
+====================================
+
+This section contains usage information about media subsystem and
+its supported drivers.
+
+Please see:
+
+- :doc:`/userspace-api/media/index`
+     for the userspace APIs used on media devices.
+
+- :doc:`/driver-api/media/index`
+     for driver development information and Kernel APIs used by
+     media devices;
+
+The media subsystem
+===================
+
+.. only:: html
+
+    .. class:: toc-title
+
+        Table of Contents
+
+.. toctree::
+	:maxdepth: 2
+	:numbered:
+
+	intro
+	building
+
+	remote-controller
+
+	dvb
+
+	cardlist
+
+	v4l-drivers
+	dvb-drivers
+	cec-drivers
+
+**Copyright** |copy| 1999-2020 : LinuxTV Developers
+
+::
+
+  This documentation is free software; you can redistribute it and/or modify it
+  under the terms of the GNU General Public License as published by the Free
+  Software Foundation; either version 2 of the License, or (at your option) any
+  later version.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+  more details.
+
+  For more details see the file COPYING in the source distribution of Linux.
diff --git a/Documentation/admin-guide/media/intro.rst b/Documentation/admin-guide/media/intro.rst
new file mode 100644
index 000000000000..fec8122f2412
--- /dev/null
+++ b/Documentation/admin-guide/media/intro.rst
@@ -0,0 +1,27 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+Introduction
+============
+
+The media subsystem consists on Linux support for several different types
+of devices:
+
+- Audio and video grabbers;
+- PC and Laptop Cameras;
+- Complex cameras found on Embedded hardware;
+- Analog and digital TV;
+- HDMI Customer Electronics Control (CEC);
+- Multi-touch input devices;
+- Remote Controllers;
+- Media encoders and decoders.
+
+Due to the diversity of devices, the subsystem provides several different
+APIs:
+
+- Remote Controller API;
+- HDMI CEC API;
+- Video4Linux API;
+- Media controller API;
+- Video4Linux Request API (experimental);
+- Digital TV API (also known as DVB API).
diff --git a/Documentation/admin-guide/media/ipu3.rst b/Documentation/admin-guide/media/ipu3.rst
new file mode 100644
index 000000000000..11e2ac4888f5
--- /dev/null
+++ b/Documentation/admin-guide/media/ipu3.rst
@@ -0,0 +1,571 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+===============================================================
+Intel Image Processing Unit 3 (IPU3) Imaging Unit (ImgU) driver
+===============================================================
+
+Copyright |copy| 2018 Intel Corporation
+
+Introduction
+============
+
+This file documents the Intel IPU3 (3rd generation Image Processing Unit)
+Imaging Unit drivers located under drivers/media/pci/intel/ipu3 (CIO2) as well
+as under drivers/staging/media/ipu3 (ImgU).
+
+The Intel IPU3 found in certain Kaby Lake (as well as certain Sky Lake)
+platforms (U/Y processor lines) is made up of two parts namely the Imaging Unit
+(ImgU) and the CIO2 device (MIPI CSI2 receiver).
+
+The CIO2 device receives the raw Bayer data from the sensors and outputs the
+frames in a format that is specific to the IPU3 (for consumption by the IPU3
+ImgU). The CIO2 driver is available as drivers/media/pci/intel/ipu3/ipu3-cio2*
+and is enabled through the CONFIG_VIDEO_IPU3_CIO2 config option.
+
+The Imaging Unit (ImgU) is responsible for processing images captured
+by the IPU3 CIO2 device. The ImgU driver sources can be found under
+drivers/staging/media/ipu3 directory. The driver is enabled through the
+CONFIG_VIDEO_IPU3_IMGU config option.
+
+The two driver modules are named ipu3_csi2 and ipu3_imgu, respectively.
+
+The drivers has been tested on Kaby Lake platforms (U/Y processor lines).
+
+Both of the drivers implement V4L2, Media Controller and V4L2 sub-device
+interfaces. The IPU3 CIO2 driver supports camera sensors connected to the CIO2
+MIPI CSI-2 interfaces through V4L2 sub-device sensor drivers.
+
+CIO2
+====
+
+The CIO2 is represented as a single V4L2 subdev, which provides a V4L2 subdev
+interface to the user space. There is a video node for each CSI-2 receiver,
+with a single media controller interface for the entire device.
+
+The CIO2 contains four independent capture channel, each with its own MIPI CSI-2
+receiver and DMA engine. Each channel is modelled as a V4L2 sub-device exposed
+to userspace as a V4L2 sub-device node and has two pads:
+
+.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|
+
+.. flat-table::
+
+    * - pad
+      - direction
+      - purpose
+
+    * - 0
+      - sink
+      - MIPI CSI-2 input, connected to the sensor subdev
+
+    * - 1
+      - source
+      - Raw video capture, connected to the V4L2 video interface
+
+The V4L2 video interfaces model the DMA engines. They are exposed to userspace
+as V4L2 video device nodes.
+
+Capturing frames in raw Bayer format
+------------------------------------
+
+CIO2 MIPI CSI2 receiver is used to capture frames (in packed raw Bayer format)
+from the raw sensors connected to the CSI2 ports. The captured frames are used
+as input to the ImgU driver.
+
+Image processing using IPU3 ImgU requires tools such as raw2pnm [#f1]_, and
+yavta [#f2]_ due to the following unique requirements and / or features specific
+to IPU3.
+
+-- The IPU3 CSI2 receiver outputs the captured frames from the sensor in packed
+raw Bayer format that is specific to IPU3.
+
+-- Multiple video nodes have to be operated simultaneously.
+
+Let us take the example of ov5670 sensor connected to CSI2 port 0, for a
+2592x1944 image capture.
+
+Using the media contorller APIs, the ov5670 sensor is configured to send
+frames in packed raw Bayer format to IPU3 CSI2 receiver.
+
+# This example assumes /dev/media0 as the CIO2 media device
+
+export MDEV=/dev/media0
+
+# and that ov5670 sensor is connected to i2c bus 10 with address 0x36
+
+export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036")
+
+# Establish the link for the media devices using media-ctl [#f3]_
+media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]"
+
+# Set the format for the media devices
+media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]"
+
+media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]"
+
+media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]"
+
+Once the media pipeline is configured, desired sensor specific settings
+(such as exposure and gain settings) can be set, using the yavta tool.
+
+e.g
+
+yavta -w 0x009e0903 444 $SDEV
+
+yavta -w 0x009e0913 1024 $SDEV
+
+yavta -w 0x009e0911 2046 $SDEV
+
+Once the desired sensor settings are set, frame captures can be done as below.
+
+e.g
+
+yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \
+      -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0")
+
+With the above command, 10 frames are captured at 2592x1944 resolution, with
+sGRBG10 format and output as IPU3_SGRBG10 format.
+
+The captured frames are available as /tmp/frame-#.bin files.
+
+ImgU
+====
+
+The ImgU is represented as two V4L2 subdevs, each of which provides a V4L2
+subdev interface to the user space.
+
+Each V4L2 subdev represents a pipe, which can support a maximum of 2 streams.
+This helps to support advanced camera features like Continuous View Finder (CVF)
+and Snapshot During Video(SDV).
+
+The ImgU contains two independent pipes, each modelled as a V4L2 sub-device
+exposed to userspace as a V4L2 sub-device node.
+
+Each pipe has two sink pads and three source pads for the following purpose:
+
+.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|
+
+.. flat-table::
+
+    * - pad
+      - direction
+      - purpose
+
+    * - 0
+      - sink
+      - Input raw video stream
+
+    * - 1
+      - sink
+      - Processing parameters
+
+    * - 2
+      - source
+      - Output processed video stream
+
+    * - 3
+      - source
+      - Output viewfinder video stream
+
+    * - 4
+      - source
+      - 3A statistics
+
+Each pad is connected to a corresponding V4L2 video interface, exposed to 
+userspace as a V4L2 video device node.
+
+Device operation
+----------------
+
+With ImgU, once the input video node ("ipu3-imgu 0/1":0, in
+<entity>:<pad-number> format) is queued with buffer (in packed raw Bayer
+format), ImgU starts processing the buffer and produces the video output in YUV
+format and statistics output on respective output nodes. The driver is expected
+to have buffers ready for all of parameter, output and statistics nodes, when
+input video node is queued with buffer.
+
+At a minimum, all of input, main output, 3A statistics and viewfinder
+video nodes should be enabled for IPU3 to start image processing.
+
+Each ImgU V4L2 subdev has the following set of video nodes.
+
+input, output and viewfinder video nodes
+----------------------------------------
+
+The frames (in packed raw Bayer format specific to the IPU3) received by the
+input video node is processed by the IPU3 Imaging Unit and are output to 2 video
+nodes, with each targeting a different purpose (main output and viewfinder
+output).
+
+Details onand the Bayer format specific to the IPU3 can be found in
+:ref:`v4l2-pix-fmt-ipu3-sbggr10`.
+
+The driver supports V4L2 Video Capture Interface as defined at :ref:`devices`.
+
+Only the multi-planar API is supported. More details can be found at
+:ref:`planar-apis`.
+
+Parameters video node
+---------------------
+
+The parameters video node receives the ImgU algorithm parameters that are used
+to configure how the ImgU algorithms process the image.
+
+Details on processing parameters specific to the IPU3 can be found in
+:ref:`v4l2-meta-fmt-params`.
+
+3A statistics video node
+------------------------
+
+3A statistics video node is used by the ImgU driver to output the 3A (auto
+focus, auto exposure and auto white balance) statistics for the frames that are
+being processed by the ImgU to user space applications. User space applications
+can use this statistics data to compute the desired algorithm parameters for
+the ImgU.
+
+Configuring the Intel IPU3
+==========================
+
+The IPU3 ImgU pipelines can be configured using the Media Controller, defined at
+:ref:`media_controller`.
+
+Firmware binary selection
+-------------------------
+
+The firmware binary is selected using the V4L2_CID_INTEL_IPU3_MODE, currently
+defined in drivers/staging/media/ipu3/include/intel-ipu3.h . "VIDEO" and "STILL"
+modes are available.
+
+Processing the image in raw Bayer format
+----------------------------------------
+
+Configuring ImgU V4L2 subdev for image processing
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The ImgU V4L2 subdevs have to be configured with media controller APIs to have
+all the video nodes setup correctly.
+
+Let us take "ipu3-imgu 0" subdev as an example.
+
+media-ctl -d $MDEV -r
+
+media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1]
+
+media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1]
+
+media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1]
+
+media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1]
+
+Also the pipe mode of the corresponding V4L2 subdev should be set as desired
+(e.g 0 for video mode or 1 for still mode) through the control id 0x009819a1 as
+below.
+
+yavta -w "0x009819A1 1" /dev/v4l-subdev7
+
+Certain hardware blocks in ImgU pipeline can change the frame resolution by
+cropping or scaling, these hardware blocks include Input Feeder(IF), Bayer Down
+Scaler (BDS) and Geometric Distortion Correction (GDC).
+There is also a block which can change the frame resolution - YUV Scaler, it is
+only applicable to the secondary output.
+
+RAW Bayer frames go through these ImgU pipeline hardware blocks and the final
+processed image output to the DDR memory.
+
+.. kernel-figure::  ipu3_rcb.svg
+   :alt: ipu3 resolution blocks image
+
+   IPU3 resolution change hardware blocks
+
+**Input Feeder**
+
+Input Feeder gets the Bayer frame data from the sensor, it can enable cropping
+of lines and columns from the frame and then store pixels into device's internal
+pixel buffer which are ready to readout by following blocks.
+
+**Bayer Down Scaler**
+
+Bayer Down Scaler is capable of performing image scaling in Bayer domain, the
+downscale factor can be configured from 1X to 1/4X in each axis with
+configuration steps of 0.03125 (1/32).
+
+**Geometric Distortion Correction**
+
+Geometric Distortion Correction is used to performe correction of distortions
+and image filtering. It needs some extra filter and envelop padding pixels to
+work, so the input resolution of GDC should be larger than the output
+resolution.
+
+**YUV Scaler**
+
+YUV Scaler which similar with BDS, but it is mainly do image down scaling in
+YUV domain, it can support up to 1/12X down scaling, but it can not be applied
+to the main output.
+
+The ImgU V4L2 subdev has to be configured with the supported resolutions in all
+the above hardware blocks, for a given input resolution.
+For a given supported resolution for an input frame, the Input Feeder, Bayer
+Down Scaler and GDC blocks should be configured with the supported resolutions
+as each hardware block has its own alignment requirement.
+
+You must configure the output resolution of the hardware blocks smartly to meet
+the hardware requirement along with keeping the maximum field of view. The
+intermediate resolutions can be generated by specific tool -
+
+https://github.com/intel/intel-ipu3-pipecfg
+
+This tool can be used to generate intermediate resolutions. More information can
+be obtained by looking at the following IPU3 ImgU configuration table.
+
+https://chromium.googlesource.com/chromiumos/overlays/board-overlays/+/master
+
+Under baseboard-poppy/media-libs/cros-camera-hal-configs-poppy/files/gcss
+directory, graph_settings_ov5670.xml can be used as an example.
+
+The following steps prepare the ImgU pipeline for the image processing.
+
+1. The ImgU V4L2 subdev data format should be set by using the
+VIDIOC_SUBDEV_S_FMT on pad 0, using the GDC width and height obtained above.
+
+2. The ImgU V4L2 subdev cropping should be set by using the
+VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_CROP as the target,
+using the input feeder height and width.
+
+3. The ImgU V4L2 subdev composing should be set by using the
+VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_COMPOSE as the target,
+using the BDS height and width.
+
+For the ov5670 example, for an input frame with a resolution of 2592x1944
+(which is input to the ImgU subdev pad 0), the corresponding resolutions
+for input feeder, BDS and GDC are 2592x1944, 2592x1944 and 2560x1920
+respectively.
+
+Once this is done, the received raw Bayer frames can be input to the ImgU
+V4L2 subdev as below, using the open source application v4l2n [#f1]_.
+
+For an image captured with 2592x1944 [#f4]_ resolution, with desired output
+resolution as 2560x1920 and viewfinder resolution as 2560x1920, the following
+v4l2n command can be used. This helps process the raw Bayer frames and produces
+the desired results for the main output image and the viewfinder output, in NV12
+format.
+
+v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4
+--fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069
+--reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 --output=/tmp/frames.out
+--open=/dev/video5
+--fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
+--reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 --output=/tmp/frames.vf
+--open=/dev/video6
+--fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
+--reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7
+--output=/tmp/frames.3A --fmt=type:META_CAPTURE,?
+--reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5
+
+You can also use yavta [#f2]_ command to do same thing as above:
+
+.. code-block:: none
+
+	yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
+	--file=frame-#.out-f NV12 /dev/video5 & \
+	yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
+	--file=frame-#.vf -f NV12 /dev/video6 & \
+	yavta --data-prefix -Bmeta-capture -c10 -n5 -I \
+	--file=frame-#.3a /dev/video7 & \
+	yavta --data-prefix -Boutput-mplane -c10 -n5 -I -s2592x1944 \
+	--file=/tmp/frame-in.cio2 -f IPU3_SGRBG10 /dev/video4
+
+where /dev/video4, /dev/video5, /dev/video6 and /dev/video7 devices point to
+input, output, viewfinder and 3A statistics video nodes respectively.
+
+Converting the raw Bayer image into YUV domain
+----------------------------------------------
+
+The processed images after the above step, can be converted to YUV domain
+as below.
+
+Main output frames
+~~~~~~~~~~~~~~~~~~
+
+raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm
+
+where 2560x1920 is output resolution, NV12 is the video format, followed
+by input frame and output PNM file.
+
+Viewfinder output frames
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm
+
+where 2560x1920 is output resolution, NV12 is the video format, followed
+by input frame and output PNM file.
+
+Example user space code for IPU3
+================================
+
+User space code that configures and uses IPU3 is available here.
+
+https://chromium.googlesource.com/chromiumos/platform/arc-camera/+/master/
+
+The source can be located under hal/intel directory.
+
+Overview of IPU3 pipeline
+=========================
+
+IPU3 pipeline has a number of image processing stages, each of which takes a
+set of parameters as input. The major stages of pipelines are shown here:
+
+.. kernel-render:: DOT
+   :alt: IPU3 ImgU Pipeline
+   :caption: IPU3 ImgU Pipeline Diagram
+
+   digraph "IPU3 ImgU" {
+       node [shape=box]
+       splines="ortho"
+       rankdir="LR"
+
+       a [label="Raw pixels"]
+       b [label="Bayer Downscaling"]
+       c [label="Optical Black Correction"]
+       d [label="Linearization"]
+       e [label="Lens Shading Correction"]
+       f [label="White Balance / Exposure / Focus Apply"]
+       g [label="Bayer Noise Reduction"]
+       h [label="ANR"]
+       i [label="Demosaicing"]
+       j [label="Color Correction Matrix"]
+       k [label="Gamma correction"]
+       l [label="Color Space Conversion"]
+       m [label="Chroma Down Scaling"]
+       n [label="Chromatic Noise Reduction"]
+       o [label="Total Color Correction"]
+       p [label="XNR3"]
+       q [label="TNR"]
+       r [label="DDR", style=filled, fillcolor=yellow, shape=cylinder]
+       s [label="YUV Downscaling"]
+       t [label="DDR", style=filled, fillcolor=yellow, shape=cylinder]
+
+       { rank=same; a -> b -> c -> d -> e -> f -> g -> h -> i }
+       { rank=same; j -> k -> l -> m -> n -> o -> p -> q -> s -> t}
+
+       a -> j [style=invis, weight=10]
+       i -> j
+       q -> r
+   }
+
+The table below presents a description of the above algorithms.
+
+======================== =======================================================
+Name			 Description
+======================== =======================================================
+Optical Black Correction Optical Black Correction block subtracts a pre-defined
+			 value from the respective pixel values to obtain better
+			 image quality.
+			 Defined in :c:type:`ipu3_uapi_obgrid_param`.
+Linearization		 This algo block uses linearization parameters to
+			 address non-linearity sensor effects. The Lookup table
+			 table is defined in
+			 :c:type:`ipu3_uapi_isp_lin_vmem_params`.
+SHD			 Lens shading correction is used to correct spatial
+			 non-uniformity of the pixel response due to optical
+			 lens shading. This is done by applying a different gain
+			 for each pixel. The gain, black level etc are
+			 configured in :c:type:`ipu3_uapi_shd_config_static`.
+BNR			 Bayer noise reduction block removes image noise by
+			 applying a bilateral filter.
+			 See :c:type:`ipu3_uapi_bnr_static_config` for details.
+ANR			 Advanced Noise Reduction is a block based algorithm
+			 that performs noise reduction in the Bayer domain. The
+			 convolution matrix etc can be found in
+			 :c:type:`ipu3_uapi_anr_config`.
+DM			 Demosaicing converts raw sensor data in Bayer format
+			 into RGB (Red, Green, Blue) presentation. Then add
+			 outputs of estimation of Y channel for following stream
+			 processing by Firmware. The struct is defined as
+			 :c:type:`ipu3_uapi_dm_config`.
+Color Correction	 Color Correction algo transforms sensor specific color
+			 space to the standard "sRGB" color space. This is done
+			 by applying 3x3 matrix defined in
+			 :c:type:`ipu3_uapi_ccm_mat_config`.
+Gamma correction	 Gamma correction :c:type:`ipu3_uapi_gamma_config` is a
+			 basic non-linear tone mapping correction that is
+			 applied per pixel for each pixel component.
+CSC			 Color space conversion transforms each pixel from the
+			 RGB primary presentation to YUV (Y: brightness,
+			 UV: Luminance) presentation. This is done by applying
+			 a 3x3 matrix defined in
+			 :c:type:`ipu3_uapi_csc_mat_config`
+CDS			 Chroma down sampling
+			 After the CSC is performed, the Chroma Down Sampling
+			 is applied for a UV plane down sampling by a factor
+			 of 2 in each direction for YUV 4:2:0 using a 4x2
+			 configurable filter :c:type:`ipu3_uapi_cds_params`.
+CHNR			 Chroma noise reduction
+			 This block processes only the chrominance pixels and
+			 performs noise reduction by cleaning the high
+			 frequency noise.
+			 See struct :c:type:`ipu3_uapi_yuvp1_chnr_config`.
+TCC			 Total color correction as defined in struct
+			 :c:type:`ipu3_uapi_yuvp2_tcc_static_config`.
+XNR3			 eXtreme Noise Reduction V3 is the third revision of
+			 noise reduction algorithm used to improve image
+			 quality. This removes the low frequency noise in the
+			 captured image. Two related structs are  being defined,
+			 :c:type:`ipu3_uapi_isp_xnr3_params` for ISP data memory
+			 and :c:type:`ipu3_uapi_isp_xnr3_vmem_params` for vector
+			 memory.
+TNR			 Temporal Noise Reduction block compares successive
+			 frames in time to remove anomalies / noise in pixel
+			 values. :c:type:`ipu3_uapi_isp_tnr3_vmem_params` and
+			 :c:type:`ipu3_uapi_isp_tnr3_params` are defined for ISP
+			 vector and data memory respectively.
+======================== =======================================================
+
+Other often encountered acronyms not listed in above table:
+
+	ACC
+		Accelerator cluster
+	AWB_FR
+		Auto white balance filter response statistics
+	BDS
+		Bayer downscaler parameters
+	CCM
+		Color correction matrix coefficients
+	IEFd
+		Image enhancement filter directed
+	Obgrid
+		Optical black level compensation
+	OSYS
+		Output system configuration
+	ROI
+		Region of interest
+	YDS
+		Y down sampling
+	YTM
+		Y-tone mapping
+
+A few stages of the pipeline will be executed by firmware running on the ISP
+processor, while many others will use a set of fixed hardware blocks also
+called accelerator cluster (ACC) to crunch pixel data and produce statistics.
+
+ACC parameters of individual algorithms, as defined by
+:c:type:`ipu3_uapi_acc_param`, can be chosen to be applied by the user
+space through struct :c:type:`ipu3_uapi_flags` embedded in
+:c:type:`ipu3_uapi_params` structure. For parameters that are configured as
+not enabled by the user space, the corresponding structs are ignored by the
+driver, in which case the existing configuration of the algorithm will be
+preserved.
+
+References
+==========
+
+.. [#f5] drivers/staging/media/ipu3/include/intel-ipu3.h
+
+.. [#f1] https://github.com/intel/nvt
+
+.. [#f2] http://git.ideasonboard.org/yavta.git
+
+.. [#f3] http://git.ideasonboard.org/?p=media-ctl.git;a=summary
+
+.. [#f4] ImgU limitation requires an additional 16x16 for all input resolutions
diff --git a/Documentation/admin-guide/media/ipu3_rcb.svg b/Documentation/admin-guide/media/ipu3_rcb.svg
new file mode 100644
index 000000000000..d878421b42a0
--- /dev/null
+++ b/Documentation/admin-guide/media/ipu3_rcb.svg
@@ -0,0 +1,331 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="774pt" height="152pt" viewBox="0 0 774 152" version="1.1">
+<defs>
+<g>
+<symbol overflow="visible" id="glyph0-0">
+<path style="stroke:none;" d="M 1 0 L 1 -15 L 9 -15 L 9 0 Z M 8 -1 L 8 -14 L 2 -14 L 2 -1 Z M 8 -1 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-1">
+<path style="stroke:none;" d="M 4.6875 -1.15625 C 5.519531 -1.15625 6.15625 -1.316406 6.59375 -1.640625 C 7.039062 -1.960938 7.265625 -2.441406 7.265625 -3.078125 C 7.265625 -3.460938 7.179688 -3.789062 7.015625 -4.0625 C 6.859375 -4.34375 6.644531 -4.582031 6.375 -4.78125 C 6.113281 -4.988281 5.816406 -5.171875 5.484375 -5.328125 C 5.148438 -5.484375 4.804688 -5.628906 4.453125 -5.765625 C 4.054688 -5.921875 3.675781 -6.097656 3.3125 -6.296875 C 2.945312 -6.492188 2.617188 -6.726562 2.328125 -7 C 2.046875 -7.269531 1.820312 -7.582031 1.65625 -7.9375 C 1.488281 -8.300781 1.40625 -8.726562 1.40625 -9.21875 C 1.40625 -10.300781 1.742188 -11.144531 2.421875 -11.75 C 3.097656 -12.351562 4.046875 -12.65625 5.265625 -12.65625 C 5.597656 -12.65625 5.925781 -12.628906 6.25 -12.578125 C 6.570312 -12.535156 6.875 -12.476562 7.15625 -12.40625 C 7.4375 -12.34375 7.6875 -12.265625 7.90625 -12.171875 C 8.125 -12.085938 8.300781 -12 8.4375 -11.90625 L 7.921875 -10.515625 C 7.648438 -10.679688 7.28125 -10.84375 6.8125 -11 C 6.351562 -11.15625 5.835938 -11.234375 5.265625 -11.234375 C 4.660156 -11.234375 4.140625 -11.082031 3.703125 -10.78125 C 3.265625 -10.488281 3.046875 -10.039062 3.046875 -9.4375 C 3.046875 -9.09375 3.109375 -8.800781 3.234375 -8.5625 C 3.359375 -8.320312 3.53125 -8.109375 3.75 -7.921875 C 3.96875 -7.742188 4.222656 -7.582031 4.515625 -7.4375 C 4.804688 -7.289062 5.128906 -7.144531 5.484375 -7 C 5.984375 -6.789062 6.441406 -6.578125 6.859375 -6.359375 C 7.285156 -6.148438 7.648438 -5.894531 7.953125 -5.59375 C 8.253906 -5.300781 8.488281 -4.953125 8.65625 -4.546875 C 8.820312 -4.148438 8.90625 -3.664062 8.90625 -3.09375 C 8.90625 -2.019531 8.539062 -1.191406 7.8125 -0.609375 C 7.082031 -0.0234375 6.039062 0.265625 4.6875 0.265625 C 4.238281 0.265625 3.820312 0.234375 3.4375 0.171875 C 3.050781 0.109375 2.707031 0.03125 2.40625 -0.0625 C 2.101562 -0.15625 1.835938 -0.25 1.609375 -0.34375 C 1.390625 -0.4375 1.21875 -0.519531 1.09375 -0.59375 L 1.59375 -1.953125 C 1.863281 -1.804688 2.257812 -1.632812 2.78125 -1.4375 C 3.300781 -1.25 3.9375 -1.15625 4.6875 -1.15625 Z M 4.6875 -1.15625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-2">
+<path style="stroke:none;" d="M 5.1875 -9.5 C 6.4375 -9.5 7.398438 -9.109375 8.078125 -8.328125 C 8.753906 -7.546875 9.09375 -6.363281 9.09375 -4.78125 L 9.09375 -4.203125 L 2.453125 -4.203125 C 2.523438 -3.242188 2.84375 -2.515625 3.40625 -2.015625 C 3.976562 -1.515625 4.773438 -1.265625 5.796875 -1.265625 C 6.390625 -1.265625 6.890625 -1.3125 7.296875 -1.40625 C 7.710938 -1.5 8.023438 -1.597656 8.234375 -1.703125 L 8.453125 -0.296875 C 8.253906 -0.191406 7.894531 -0.0820312 7.375 0.03125 C 6.851562 0.15625 6.269531 0.21875 5.625 0.21875 C 4.820312 0.21875 4.113281 0.0976562 3.5 -0.140625 C 2.894531 -0.390625 2.394531 -0.726562 2 -1.15625 C 1.601562 -1.582031 1.300781 -2.09375 1.09375 -2.6875 C 0.894531 -3.28125 0.796875 -3.925781 0.796875 -4.625 C 0.796875 -5.445312 0.921875 -6.164062 1.171875 -6.78125 C 1.429688 -7.394531 1.765625 -7.898438 2.171875 -8.296875 C 2.585938 -8.703125 3.054688 -9.003906 3.578125 -9.203125 C 4.097656 -9.398438 4.632812 -9.5 5.1875 -9.5 Z M 7.421875 -5.546875 C 7.421875 -6.328125 7.210938 -6.945312 6.796875 -7.40625 C 6.390625 -7.863281 5.84375 -8.09375 5.15625 -8.09375 C 4.769531 -8.09375 4.421875 -8.019531 4.109375 -7.875 C 3.796875 -7.726562 3.523438 -7.535156 3.296875 -7.296875 C 3.066406 -7.054688 2.882812 -6.78125 2.75 -6.46875 C 2.625 -6.164062 2.539062 -5.859375 2.5 -5.546875 Z M 7.421875 -5.546875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-3">
+<path style="stroke:none;" d="M 1.421875 -9.015625 C 2.015625 -9.160156 2.609375 -9.273438 3.203125 -9.359375 C 3.796875 -9.441406 4.351562 -9.484375 4.875 -9.484375 C 6.113281 -9.484375 7.050781 -9.160156 7.6875 -8.515625 C 8.320312 -7.878906 8.640625 -6.851562 8.640625 -5.4375 L 8.640625 0 L 7 0 L 7 -5.140625 C 7 -5.742188 6.945312 -6.226562 6.84375 -6.59375 C 6.738281 -6.96875 6.585938 -7.257812 6.390625 -7.46875 C 6.191406 -7.675781 5.957031 -7.816406 5.6875 -7.890625 C 5.414062 -7.972656 5.117188 -8.015625 4.796875 -8.015625 C 4.535156 -8.015625 4.253906 -8 3.953125 -7.96875 C 3.648438 -7.9375 3.359375 -7.894531 3.078125 -7.84375 L 3.078125 0 L 1.421875 0 Z M 1.421875 -9.015625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-4">
+<path style="stroke:none;" d="M 7.015625 -2.3125 C 7.015625 -2.644531 6.878906 -2.914062 6.609375 -3.125 C 6.335938 -3.34375 6 -3.53125 5.59375 -3.6875 C 5.1875 -3.851562 4.742188 -4.015625 4.265625 -4.171875 C 3.785156 -4.328125 3.335938 -4.515625 2.921875 -4.734375 C 2.515625 -4.960938 2.175781 -5.242188 1.90625 -5.578125 C 1.632812 -5.910156 1.5 -6.34375 1.5 -6.875 C 1.5 -7.625 1.800781 -8.25 2.40625 -8.75 C 3.007812 -9.25 3.960938 -9.5 5.265625 -9.5 C 5.765625 -9.5 6.285156 -9.460938 6.828125 -9.390625 C 7.367188 -9.316406 7.832031 -9.21875 8.21875 -9.09375 L 7.921875 -7.625 C 7.816406 -7.675781 7.671875 -7.726562 7.484375 -7.78125 C 7.296875 -7.84375 7.082031 -7.894531 6.84375 -7.9375 C 6.601562 -7.988281 6.34375 -8.023438 6.0625 -8.046875 C 5.789062 -8.078125 5.53125 -8.09375 5.28125 -8.09375 C 3.84375 -8.09375 3.125 -7.703125 3.125 -6.921875 C 3.125 -6.640625 3.257812 -6.398438 3.53125 -6.203125 C 3.800781 -6.015625 4.144531 -5.835938 4.5625 -5.671875 C 4.976562 -5.515625 5.425781 -5.351562 5.90625 -5.1875 C 6.382812 -5.019531 6.828125 -4.816406 7.234375 -4.578125 C 7.648438 -4.335938 7.992188 -4.046875 8.265625 -3.703125 C 8.546875 -3.367188 8.6875 -2.941406 8.6875 -2.421875 C 8.6875 -1.578125 8.359375 -0.925781 7.703125 -0.46875 C 7.046875 -0.0078125 6.007812 0.21875 4.59375 0.21875 C 3.957031 0.21875 3.375 0.164062 2.84375 0.0625 C 2.3125 -0.0390625 1.800781 -0.203125 1.3125 -0.421875 L 1.640625 -1.921875 C 2.109375 -1.703125 2.597656 -1.523438 3.109375 -1.390625 C 3.617188 -1.253906 4.171875 -1.1875 4.765625 -1.1875 C 6.265625 -1.1875 7.015625 -1.5625 7.015625 -2.3125 Z M 7.015625 -2.3125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-5">
+<path style="stroke:none;" d="M 9.203125 -4.640625 C 9.203125 -3.910156 9.097656 -3.25 8.890625 -2.65625 C 8.679688 -2.0625 8.390625 -1.550781 8.015625 -1.125 C 7.640625 -0.695312 7.191406 -0.363281 6.671875 -0.125 C 6.160156 0.101562 5.597656 0.21875 4.984375 0.21875 C 4.378906 0.21875 3.820312 0.101562 3.3125 -0.125 C 2.800781 -0.363281 2.359375 -0.695312 1.984375 -1.125 C 1.609375 -1.550781 1.316406 -2.0625 1.109375 -2.65625 C 0.898438 -3.25 0.796875 -3.910156 0.796875 -4.640625 C 0.796875 -5.367188 0.898438 -6.035156 1.109375 -6.640625 C 1.316406 -7.242188 1.609375 -7.753906 1.984375 -8.171875 C 2.359375 -8.585938 2.800781 -8.910156 3.3125 -9.140625 C 3.820312 -9.378906 4.378906 -9.5 4.984375 -9.5 C 5.597656 -9.5 6.160156 -9.378906 6.671875 -9.140625 C 7.191406 -8.910156 7.640625 -8.585938 8.015625 -8.171875 C 8.390625 -7.753906 8.679688 -7.242188 8.890625 -6.640625 C 9.097656 -6.035156 9.203125 -5.367188 9.203125 -4.640625 Z M 7.5 -4.640625 C 7.5 -5.691406 7.269531 -6.519531 6.8125 -7.125 C 6.363281 -7.738281 5.753906 -8.046875 4.984375 -8.046875 C 4.222656 -8.046875 3.617188 -7.738281 3.171875 -7.125 C 2.722656 -6.519531 2.5 -5.691406 2.5 -4.640625 C 2.5 -3.597656 2.722656 -2.773438 3.171875 -2.171875 C 3.617188 -1.566406 4.222656 -1.265625 4.984375 -1.265625 C 5.753906 -1.265625 6.363281 -1.566406 6.8125 -2.171875 C 7.269531 -2.773438 7.5 -3.597656 7.5 -4.640625 Z M 7.5 -4.640625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-6">
+<path style="stroke:none;" d="M 2.140625 0 L 2.140625 -8.78125 C 3.503906 -9.25 4.878906 -9.484375 6.265625 -9.484375 C 6.691406 -9.484375 7.097656 -9.460938 7.484375 -9.421875 C 7.867188 -9.390625 8.296875 -9.320312 8.765625 -9.21875 L 8.453125 -7.765625 C 8.023438 -7.878906 7.648438 -7.953125 7.328125 -7.984375 C 7.003906 -8.023438 6.648438 -8.046875 6.265625 -8.046875 C 5.453125 -8.046875 4.625 -7.929688 3.78125 -7.703125 L 3.78125 0 Z M 2.140625 0 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-7">
+<path style="stroke:none;" d="M 5.8125 -10.984375 L 5.8125 -1.40625 L 8.21875 -1.40625 L 8.21875 0 L 1.78125 0 L 1.78125 -1.40625 L 4.1875 -1.40625 L 4.1875 -10.984375 L 1.78125 -10.984375 L 1.78125 -12.375 L 8.21875 -12.375 L 8.21875 -10.984375 Z M 5.8125 -10.984375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-8">
+<path style="stroke:none;" d="M 1.8125 0 L 1.8125 -12.375 L 8.84375 -12.375 L 8.84375 -10.984375 L 3.453125 -10.984375 L 3.453125 -7.125 L 8.203125 -7.125 L 8.203125 -5.734375 L 3.453125 -5.734375 L 3.453125 0 Z M 1.8125 0 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-9">
+<path style="stroke:none;" d="M 4.078125 0.09375 C 3.878906 0.09375 3.644531 0.0859375 3.375 0.078125 C 3.113281 0.0664062 2.847656 0.0507812 2.578125 0.03125 C 2.316406 0.0078125 2.050781 -0.0195312 1.78125 -0.0625 C 1.507812 -0.101562 1.273438 -0.148438 1.078125 -0.203125 L 1.078125 -12.203125 C 1.273438 -12.253906 1.503906 -12.300781 1.765625 -12.34375 C 2.023438 -12.382812 2.289062 -12.410156 2.5625 -12.421875 C 2.84375 -12.441406 3.113281 -12.457031 3.375 -12.46875 C 3.632812 -12.488281 3.867188 -12.5 4.078125 -12.5 C 4.691406 -12.5 5.265625 -12.445312 5.796875 -12.34375 C 6.328125 -12.238281 6.789062 -12.054688 7.1875 -11.796875 C 7.582031 -11.546875 7.890625 -11.210938 8.109375 -10.796875 C 8.328125 -10.390625 8.4375 -9.878906 8.4375 -9.265625 C 8.4375 -8.960938 8.390625 -8.675781 8.296875 -8.40625 C 8.203125 -8.132812 8.070312 -7.878906 7.90625 -7.640625 C 7.738281 -7.398438 7.546875 -7.1875 7.328125 -7 C 7.109375 -6.820312 6.875 -6.6875 6.625 -6.59375 C 7.300781 -6.40625 7.867188 -6.0625 8.328125 -5.5625 C 8.785156 -5.0625 9.015625 -4.414062 9.015625 -3.625 C 9.015625 -2.394531 8.617188 -1.46875 7.828125 -0.84375 C 7.046875 -0.21875 5.796875 0.09375 4.078125 0.09375 Z M 2.71875 -5.78125 L 2.71875 -1.359375 C 2.75 -1.347656 2.898438 -1.332031 3.171875 -1.3125 C 3.441406 -1.289062 3.785156 -1.28125 4.203125 -1.28125 C 4.609375 -1.28125 5 -1.3125 5.375 -1.375 C 5.757812 -1.445312 6.097656 -1.570312 6.390625 -1.75 C 6.691406 -1.925781 6.929688 -2.160156 7.109375 -2.453125 C 7.285156 -2.753906 7.375 -3.132812 7.375 -3.59375 C 7.375 -4.007812 7.289062 -4.359375 7.125 -4.640625 C 6.957031 -4.921875 6.738281 -5.144531 6.46875 -5.3125 C 6.195312 -5.476562 5.878906 -5.597656 5.515625 -5.671875 C 5.160156 -5.742188 4.789062 -5.78125 4.40625 -5.78125 Z M 2.71875 -7.140625 L 4.015625 -7.140625 C 4.347656 -7.140625 4.679688 -7.171875 5.015625 -7.234375 C 5.347656 -7.304688 5.644531 -7.414062 5.90625 -7.5625 C 6.175781 -7.707031 6.390625 -7.90625 6.546875 -8.15625 C 6.710938 -8.414062 6.796875 -8.738281 6.796875 -9.125 C 6.796875 -9.476562 6.722656 -9.78125 6.578125 -10.03125 C 6.429688 -10.289062 6.238281 -10.5 6 -10.65625 C 5.757812 -10.820312 5.484375 -10.9375 5.171875 -11 C 4.859375 -11.0625 4.53125 -11.09375 4.1875 -11.09375 C 3.832031 -11.09375 3.523438 -11.085938 3.265625 -11.078125 C 3.003906 -11.078125 2.820312 -11.066406 2.71875 -11.046875 Z M 2.71875 -7.140625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-10">
+<path style="stroke:none;" d="M 9.203125 -6.203125 C 9.203125 -5.054688 9.054688 -4.082031 8.765625 -3.28125 C 8.484375 -2.476562 8.09375 -1.828125 7.59375 -1.328125 C 7.09375 -0.828125 6.5 -0.460938 5.8125 -0.234375 C 5.125 -0.015625 4.378906 0.09375 3.578125 0.09375 C 2.753906 0.09375 1.921875 -0.00390625 1.078125 -0.203125 L 1.078125 -12.203125 C 1.921875 -12.398438 2.753906 -12.5 3.578125 -12.5 C 4.378906 -12.5 5.125 -12.382812 5.8125 -12.15625 C 6.5 -11.925781 7.09375 -11.554688 7.59375 -11.046875 C 8.09375 -10.546875 8.484375 -9.894531 8.765625 -9.09375 C 9.054688 -8.300781 9.203125 -7.335938 9.203125 -6.203125 Z M 2.71875 -1.375 C 3.050781 -1.332031 3.390625 -1.3125 3.734375 -1.3125 C 4.335938 -1.3125 4.875 -1.398438 5.34375 -1.578125 C 5.8125 -1.765625 6.203125 -2.054688 6.515625 -2.453125 C 6.835938 -2.847656 7.082031 -3.351562 7.25 -3.96875 C 7.425781 -4.59375 7.515625 -5.335938 7.515625 -6.203125 C 7.515625 -7.878906 7.191406 -9.109375 6.546875 -9.890625 C 5.898438 -10.679688 4.945312 -11.078125 3.6875 -11.078125 C 3.507812 -11.078125 3.335938 -11.070312 3.171875 -11.0625 C 3.003906 -11.0625 2.851562 -11.046875 2.71875 -11.015625 Z M 2.71875 -1.375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-11">
+<path style="stroke:none;" d="M 7.453125 -6.09375 L 9.09375 -6.09375 L 9.09375 -0.296875 C 8.84375 -0.203125 8.4375 -0.0859375 7.875 0.046875 C 7.320312 0.191406 6.664062 0.265625 5.90625 0.265625 C 5.15625 0.265625 4.472656 0.125 3.859375 -0.15625 C 3.242188 -0.445312 2.71875 -0.863281 2.28125 -1.40625 C 1.851562 -1.957031 1.519531 -2.632812 1.28125 -3.4375 C 1.039062 -4.25 0.921875 -5.171875 0.921875 -6.203125 C 0.921875 -7.242188 1.050781 -8.160156 1.3125 -8.953125 C 1.582031 -9.753906 1.945312 -10.425781 2.40625 -10.96875 C 2.863281 -11.519531 3.398438 -11.9375 4.015625 -12.21875 C 4.628906 -12.507812 5.289062 -12.65625 6 -12.65625 C 6.457031 -12.65625 6.859375 -12.617188 7.203125 -12.546875 C 7.546875 -12.484375 7.835938 -12.40625 8.078125 -12.3125 C 8.328125 -12.226562 8.53125 -12.132812 8.6875 -12.03125 C 8.851562 -11.925781 8.976562 -11.847656 9.0625 -11.796875 L 8.515625 -10.421875 C 8.210938 -10.660156 7.847656 -10.851562 7.421875 -11 C 7.003906 -11.15625 6.5625 -11.234375 6.09375 -11.234375 C 5.59375 -11.234375 5.125 -11.113281 4.6875 -10.875 C 4.257812 -10.632812 3.890625 -10.296875 3.578125 -9.859375 C 3.273438 -9.421875 3.035156 -8.890625 2.859375 -8.265625 C 2.679688 -7.648438 2.59375 -6.960938 2.59375 -6.203125 C 2.59375 -5.453125 2.671875 -4.769531 2.828125 -4.15625 C 2.984375 -3.539062 3.207031 -3.015625 3.5 -2.578125 C 3.789062 -2.140625 4.148438 -1.796875 4.578125 -1.546875 C 5.015625 -1.304688 5.515625 -1.1875 6.078125 -1.1875 C 6.460938 -1.1875 6.757812 -1.210938 6.96875 -1.265625 C 7.1875 -1.316406 7.347656 -1.367188 7.453125 -1.421875 Z M 7.453125 -6.09375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-12">
+<path style="stroke:none;" d="M 9.203125 -0.515625 C 8.734375 -0.253906 8.234375 -0.0625 7.703125 0.0625 C 7.179688 0.195312 6.617188 0.265625 6.015625 0.265625 C 5.285156 0.265625 4.609375 0.132812 3.984375 -0.125 C 3.367188 -0.382812 2.832031 -0.773438 2.375 -1.296875 C 1.925781 -1.828125 1.570312 -2.5 1.3125 -3.3125 C 1.050781 -4.132812 0.921875 -5.097656 0.921875 -6.203125 C 0.921875 -7.253906 1.054688 -8.179688 1.328125 -8.984375 C 1.597656 -9.785156 1.96875 -10.457031 2.4375 -11 C 2.90625 -11.539062 3.453125 -11.953125 4.078125 -12.234375 C 4.703125 -12.515625 5.367188 -12.65625 6.078125 -12.65625 C 6.566406 -12.65625 7.066406 -12.585938 7.578125 -12.453125 C 8.097656 -12.328125 8.601562 -12.109375 9.09375 -11.796875 L 8.625 -10.4375 C 7.738281 -10.945312 6.910156 -11.203125 6.140625 -11.203125 C 5.585938 -11.203125 5.09375 -11.082031 4.65625 -10.84375 C 4.226562 -10.613281 3.859375 -10.28125 3.546875 -9.84375 C 3.242188 -9.40625 3.007812 -8.878906 2.84375 -8.265625 C 2.675781 -7.648438 2.59375 -6.960938 2.59375 -6.203125 C 2.59375 -5.347656 2.679688 -4.609375 2.859375 -3.984375 C 3.046875 -3.359375 3.296875 -2.835938 3.609375 -2.421875 C 3.929688 -2.003906 4.316406 -1.695312 4.765625 -1.5 C 5.210938 -1.300781 5.695312 -1.203125 6.21875 -1.203125 C 6.601562 -1.203125 7.007812 -1.25 7.4375 -1.34375 C 7.863281 -1.445312 8.304688 -1.625 8.765625 -1.875 Z M 9.203125 -0.515625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-0">
+<path style="stroke:none;" d="M 0.59375 0 L 0.59375 -9 L 5.40625 -9 L 5.40625 0 Z M 4.796875 -0.59375 L 4.796875 -8.40625 L 1.203125 -8.40625 L 1.203125 -0.59375 Z M 4.796875 -0.59375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-1">
+<path style="stroke:none;" d="M 2.515625 0 L 2.515625 -2.765625 C 2.023438 -3.554688 1.582031 -4.332031 1.1875 -5.09375 C 0.789062 -5.851562 0.445312 -6.628906 0.15625 -7.421875 L 1.265625 -7.421875 C 1.492188 -6.753906 1.757812 -6.113281 2.0625 -5.5 C 2.363281 -4.882812 2.6875 -4.253906 3.03125 -3.609375 C 3.394531 -4.285156 3.71875 -4.929688 4 -5.546875 C 4.28125 -6.160156 4.539062 -6.785156 4.78125 -7.421875 L 5.859375 -7.421875 C 5.554688 -6.640625 5.207031 -5.875 4.8125 -5.125 C 4.414062 -4.382812 3.976562 -3.601562 3.5 -2.78125 L 3.5 0 Z M 2.515625 0 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-2">
+<path style="stroke:none;" d="M 3 0.15625 C 2.5625 0.15625 2.1875 0.09375 1.875 -0.03125 C 1.570312 -0.164062 1.320312 -0.347656 1.125 -0.578125 C 0.9375 -0.804688 0.796875 -1.085938 0.703125 -1.421875 C 0.617188 -1.765625 0.578125 -2.144531 0.578125 -2.5625 L 0.578125 -7.421875 L 1.5625 -7.421875 L 1.5625 -2.65625 C 1.5625 -2.28125 1.59375 -1.96875 1.65625 -1.71875 C 1.726562 -1.46875 1.828125 -1.265625 1.953125 -1.109375 C 2.078125 -0.960938 2.222656 -0.859375 2.390625 -0.796875 C 2.566406 -0.734375 2.769531 -0.703125 3 -0.703125 C 3.226562 -0.703125 3.425781 -0.734375 3.59375 -0.796875 C 3.769531 -0.859375 3.921875 -0.960938 4.046875 -1.109375 C 4.171875 -1.265625 4.265625 -1.46875 4.328125 -1.71875 C 4.398438 -1.96875 4.4375 -2.28125 4.4375 -2.65625 L 4.4375 -7.421875 L 5.421875 -7.421875 L 5.421875 -2.5625 C 5.421875 -2.144531 5.375 -1.765625 5.28125 -1.421875 C 5.195312 -1.085938 5.054688 -0.804688 4.859375 -0.578125 C 4.671875 -0.347656 4.421875 -0.164062 4.109375 -0.03125 C 3.804688 0.09375 3.4375 0.15625 3 0.15625 Z M 3 0.15625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-3">
+<path style="stroke:none;" d="M 1.21875 -7.421875 C 1.320312 -6.921875 1.445312 -6.375 1.59375 -5.78125 C 1.738281 -5.1875 1.890625 -4.585938 2.046875 -3.984375 C 2.210938 -3.390625 2.378906 -2.820312 2.546875 -2.28125 C 2.722656 -1.738281 2.882812 -1.265625 3.03125 -0.859375 C 3.15625 -1.265625 3.300781 -1.742188 3.46875 -2.296875 C 3.644531 -2.847656 3.816406 -3.421875 3.984375 -4.015625 C 4.148438 -4.609375 4.304688 -5.203125 4.453125 -5.796875 C 4.609375 -6.390625 4.734375 -6.929688 4.828125 -7.421875 L 5.859375 -7.421875 C 5.796875 -7.109375 5.691406 -6.679688 5.546875 -6.140625 C 5.398438 -5.597656 5.226562 -4.992188 5.03125 -4.328125 C 4.832031 -3.660156 4.609375 -2.953125 4.359375 -2.203125 C 4.117188 -1.453125 3.863281 -0.71875 3.59375 0 L 2.375 0 C 2.125 -0.71875 1.878906 -1.445312 1.640625 -2.1875 C 1.410156 -2.9375 1.195312 -3.644531 1 -4.3125 C 0.800781 -4.976562 0.628906 -5.582031 0.484375 -6.125 C 0.335938 -6.675781 0.226562 -7.109375 0.15625 -7.421875 Z M 1.21875 -7.421875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-4">
+<path style="stroke:none;" d=""/>
+</symbol>
+<symbol overflow="visible" id="glyph1-5">
+<path style="stroke:none;" d="M 5.515625 -3.71875 C 5.515625 -3.03125 5.425781 -2.445312 5.25 -1.96875 C 5.082031 -1.488281 4.847656 -1.097656 4.546875 -0.796875 C 4.253906 -0.492188 3.898438 -0.273438 3.484375 -0.140625 C 3.078125 -0.00390625 2.628906 0.0625 2.140625 0.0625 C 1.648438 0.0625 1.148438 0 0.640625 -0.125 L 0.640625 -7.3125 C 1.148438 -7.4375 1.648438 -7.5 2.140625 -7.5 C 2.628906 -7.5 3.078125 -7.429688 3.484375 -7.296875 C 3.898438 -7.160156 4.253906 -6.941406 4.546875 -6.640625 C 4.847656 -6.335938 5.082031 -5.941406 5.25 -5.453125 C 5.425781 -4.972656 5.515625 -4.394531 5.515625 -3.71875 Z M 1.625 -0.828125 C 1.832031 -0.804688 2.039062 -0.796875 2.25 -0.796875 C 2.601562 -0.796875 2.921875 -0.847656 3.203125 -0.953125 C 3.484375 -1.054688 3.71875 -1.226562 3.90625 -1.46875 C 4.101562 -1.707031 4.253906 -2.007812 4.359375 -2.375 C 4.460938 -2.75 4.515625 -3.195312 4.515625 -3.71875 C 4.515625 -4.726562 4.316406 -5.46875 3.921875 -5.9375 C 3.535156 -6.40625 2.960938 -6.640625 2.203125 -6.640625 C 2.097656 -6.640625 1.992188 -6.640625 1.890625 -6.640625 C 1.796875 -6.640625 1.707031 -6.628906 1.625 -6.609375 Z M 1.625 -0.828125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-6">
+<path style="stroke:none;" d="M 5.515625 -2.78125 C 5.515625 -2.34375 5.453125 -1.945312 5.328125 -1.59375 C 5.203125 -1.238281 5.023438 -0.929688 4.796875 -0.671875 C 4.578125 -0.410156 4.3125 -0.210938 4 -0.078125 C 3.695312 0.0546875 3.359375 0.125 2.984375 0.125 C 2.628906 0.125 2.296875 0.0546875 1.984375 -0.078125 C 1.679688 -0.210938 1.414062 -0.410156 1.1875 -0.671875 C 0.96875 -0.929688 0.796875 -1.238281 0.671875 -1.59375 C 0.546875 -1.945312 0.484375 -2.34375 0.484375 -2.78125 C 0.484375 -3.21875 0.546875 -3.617188 0.671875 -3.984375 C 0.796875 -4.347656 0.96875 -4.65625 1.1875 -4.90625 C 1.414062 -5.15625 1.679688 -5.347656 1.984375 -5.484375 C 2.296875 -5.628906 2.628906 -5.703125 2.984375 -5.703125 C 3.359375 -5.703125 3.695312 -5.628906 4 -5.484375 C 4.3125 -5.347656 4.578125 -5.15625 4.796875 -4.90625 C 5.023438 -4.65625 5.203125 -4.347656 5.328125 -3.984375 C 5.453125 -3.617188 5.515625 -3.21875 5.515625 -2.78125 Z M 4.5 -2.78125 C 4.5 -3.414062 4.363281 -3.914062 4.09375 -4.28125 C 3.820312 -4.644531 3.453125 -4.828125 2.984375 -4.828125 C 2.523438 -4.828125 2.160156 -4.644531 1.890625 -4.28125 C 1.628906 -3.914062 1.5 -3.414062 1.5 -2.78125 C 1.5 -2.15625 1.628906 -1.660156 1.890625 -1.296875 C 2.160156 -0.929688 2.523438 -0.75 2.984375 -0.75 C 3.453125 -0.75 3.820312 -0.929688 4.09375 -1.296875 C 4.363281 -1.660156 4.5 -2.15625 4.5 -2.78125 Z M 4.5 -2.78125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-7">
+<path style="stroke:none;" d="M 4.109375 0 C 3.992188 -0.269531 3.890625 -0.515625 3.796875 -0.734375 C 3.710938 -0.960938 3.628906 -1.1875 3.546875 -1.40625 C 3.460938 -1.632812 3.378906 -1.867188 3.296875 -2.109375 C 3.210938 -2.359375 3.113281 -2.640625 3 -2.953125 C 2.882812 -2.640625 2.78125 -2.359375 2.6875 -2.109375 C 2.601562 -1.867188 2.519531 -1.632812 2.4375 -1.40625 C 2.351562 -1.1875 2.265625 -0.960938 2.171875 -0.734375 C 2.085938 -0.515625 1.984375 -0.269531 1.859375 0 L 1.109375 0 C 0.890625 -0.976562 0.707031 -1.953125 0.5625 -2.921875 C 0.414062 -3.890625 0.304688 -4.769531 0.234375 -5.5625 L 1.15625 -5.5625 C 1.1875 -5.25 1.210938 -4.941406 1.234375 -4.640625 C 1.265625 -4.347656 1.300781 -4.035156 1.34375 -3.703125 C 1.382812 -3.378906 1.429688 -3.023438 1.484375 -2.640625 C 1.535156 -2.253906 1.59375 -1.820312 1.65625 -1.34375 C 1.78125 -1.664062 1.882812 -1.945312 1.96875 -2.1875 C 2.0625 -2.425781 2.144531 -2.648438 2.21875 -2.859375 C 2.289062 -3.078125 2.359375 -3.296875 2.421875 -3.515625 C 2.492188 -3.742188 2.570312 -4 2.65625 -4.28125 L 3.390625 -4.28125 C 3.472656 -4 3.546875 -3.742188 3.609375 -3.515625 C 3.671875 -3.296875 3.738281 -3.078125 3.8125 -2.859375 C 3.882812 -2.648438 3.957031 -2.425781 4.03125 -2.1875 C 4.113281 -1.945312 4.21875 -1.671875 4.34375 -1.359375 C 4.414062 -1.796875 4.476562 -2.203125 4.53125 -2.578125 C 4.59375 -2.953125 4.640625 -3.304688 4.671875 -3.640625 C 4.710938 -3.972656 4.75 -4.296875 4.78125 -4.609375 C 4.820312 -4.921875 4.851562 -5.238281 4.875 -5.5625 L 5.765625 -5.5625 C 5.734375 -5.164062 5.6875 -4.738281 5.625 -4.28125 C 5.570312 -3.820312 5.503906 -3.351562 5.421875 -2.875 C 5.335938 -2.394531 5.25 -1.910156 5.15625 -1.421875 C 5.0625 -0.929688 4.960938 -0.457031 4.859375 0 Z M 4.109375 0 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-8">
+<path style="stroke:none;" d="M 0.859375 -5.40625 C 1.210938 -5.5 1.566406 -5.566406 1.921875 -5.609375 C 2.273438 -5.660156 2.609375 -5.6875 2.921875 -5.6875 C 3.671875 -5.6875 4.234375 -5.492188 4.609375 -5.109375 C 4.992188 -4.722656 5.1875 -4.109375 5.1875 -3.265625 L 5.1875 0 L 4.203125 0 L 4.203125 -3.078125 C 4.203125 -3.441406 4.171875 -3.734375 4.109375 -3.953125 C 4.046875 -4.179688 3.953125 -4.359375 3.828125 -4.484375 C 3.710938 -4.609375 3.570312 -4.691406 3.40625 -4.734375 C 3.25 -4.785156 3.070312 -4.8125 2.875 -4.8125 C 2.71875 -4.8125 2.546875 -4.800781 2.359375 -4.78125 C 2.179688 -4.757812 2.007812 -4.734375 1.84375 -4.703125 L 1.84375 0 L 0.859375 0 Z M 0.859375 -5.40625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-9">
+<path style="stroke:none;" d="M 4.21875 -1.390625 C 4.21875 -1.585938 4.132812 -1.75 3.96875 -1.875 C 3.800781 -2.007812 3.59375 -2.125 3.34375 -2.21875 C 3.101562 -2.3125 2.835938 -2.40625 2.546875 -2.5 C 2.265625 -2.59375 2 -2.707031 1.75 -2.84375 C 1.507812 -2.976562 1.304688 -3.144531 1.140625 -3.34375 C 0.984375 -3.539062 0.90625 -3.800781 0.90625 -4.125 C 0.90625 -4.570312 1.082031 -4.945312 1.4375 -5.25 C 1.800781 -5.550781 2.375 -5.703125 3.15625 -5.703125 C 3.457031 -5.703125 3.769531 -5.675781 4.09375 -5.625 C 4.414062 -5.582031 4.695312 -5.523438 4.9375 -5.453125 L 4.75 -4.578125 C 4.6875 -4.609375 4.597656 -4.640625 4.484375 -4.671875 C 4.367188 -4.710938 4.238281 -4.742188 4.09375 -4.765625 C 3.957031 -4.796875 3.804688 -4.816406 3.640625 -4.828125 C 3.472656 -4.847656 3.316406 -4.859375 3.171875 -4.859375 C 2.304688 -4.859375 1.875 -4.625 1.875 -4.15625 C 1.875 -3.988281 1.953125 -3.84375 2.109375 -3.71875 C 2.273438 -3.601562 2.484375 -3.5 2.734375 -3.40625 C 2.984375 -3.3125 3.25 -3.210938 3.53125 -3.109375 C 3.820312 -3.015625 4.09375 -2.894531 4.34375 -2.75 C 4.59375 -2.601562 4.796875 -2.425781 4.953125 -2.21875 C 5.117188 -2.019531 5.203125 -1.765625 5.203125 -1.453125 C 5.203125 -0.953125 5.003906 -0.5625 4.609375 -0.28125 C 4.222656 -0.0078125 3.609375 0.125 2.765625 0.125 C 2.378906 0.125 2.023438 0.09375 1.703125 0.03125 C 1.378906 -0.03125 1.078125 -0.125 0.796875 -0.25 L 0.984375 -1.15625 C 1.265625 -1.019531 1.554688 -0.910156 1.859375 -0.828125 C 2.171875 -0.742188 2.503906 -0.703125 2.859375 -0.703125 C 3.765625 -0.703125 4.21875 -0.929688 4.21875 -1.390625 Z M 4.21875 -1.390625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-10">
+<path style="stroke:none;" d="M 0.59375 -2.765625 C 0.59375 -3.273438 0.671875 -3.710938 0.828125 -4.078125 C 0.984375 -4.441406 1.203125 -4.742188 1.484375 -4.984375 C 1.765625 -5.234375 2.09375 -5.414062 2.46875 -5.53125 C 2.84375 -5.644531 3.238281 -5.703125 3.65625 -5.703125 C 3.925781 -5.703125 4.195312 -5.679688 4.46875 -5.640625 C 4.738281 -5.609375 5.023438 -5.546875 5.328125 -5.453125 L 5.09375 -4.59375 C 4.832031 -4.6875 4.59375 -4.75 4.375 -4.78125 C 4.15625 -4.8125 3.929688 -4.828125 3.703125 -4.828125 C 3.421875 -4.828125 3.148438 -4.785156 2.890625 -4.703125 C 2.640625 -4.628906 2.414062 -4.507812 2.21875 -4.34375 C 2.03125 -4.1875 1.878906 -3.976562 1.765625 -3.71875 C 1.660156 -3.457031 1.609375 -3.140625 1.609375 -2.765625 C 1.609375 -2.421875 1.660156 -2.117188 1.765625 -1.859375 C 1.867188 -1.609375 2.015625 -1.398438 2.203125 -1.234375 C 2.390625 -1.078125 2.613281 -0.957031 2.875 -0.875 C 3.144531 -0.789062 3.4375 -0.75 3.75 -0.75 C 4.007812 -0.75 4.253906 -0.765625 4.484375 -0.796875 C 4.722656 -0.828125 4.984375 -0.890625 5.265625 -0.984375 L 5.40625 -0.15625 C 5.125 -0.0507812 4.835938 0.0195312 4.546875 0.0625 C 4.265625 0.101562 3.957031 0.125 3.625 0.125 C 3.175781 0.125 2.765625 0.0664062 2.390625 -0.046875 C 2.023438 -0.171875 1.707031 -0.351562 1.4375 -0.59375 C 1.164062 -0.832031 0.957031 -1.132812 0.8125 -1.5 C 0.664062 -1.863281 0.59375 -2.285156 0.59375 -2.765625 Z M 0.59375 -2.765625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-11">
+<path style="stroke:none;" d="M 3.0625 -0.703125 C 3.3125 -0.703125 3.53125 -0.707031 3.71875 -0.71875 C 3.914062 -0.738281 4.082031 -0.765625 4.21875 -0.796875 L 4.21875 -2.453125 C 4.082031 -2.492188 3.925781 -2.523438 3.75 -2.546875 C 3.570312 -2.566406 3.382812 -2.578125 3.1875 -2.578125 C 3 -2.578125 2.816406 -2.5625 2.640625 -2.53125 C 2.460938 -2.507812 2.304688 -2.460938 2.171875 -2.390625 C 2.035156 -2.316406 1.921875 -2.222656 1.828125 -2.109375 C 1.742188 -1.992188 1.703125 -1.847656 1.703125 -1.671875 C 1.703125 -1.304688 1.820312 -1.050781 2.0625 -0.90625 C 2.3125 -0.769531 2.644531 -0.703125 3.0625 -0.703125 Z M 2.96875 -5.703125 C 3.382812 -5.703125 3.734375 -5.648438 4.015625 -5.546875 C 4.296875 -5.441406 4.523438 -5.296875 4.703125 -5.109375 C 4.878906 -4.929688 5.003906 -4.707031 5.078125 -4.4375 C 5.148438 -4.175781 5.1875 -3.890625 5.1875 -3.578125 L 5.1875 -0.09375 C 4.957031 -0.0507812 4.648438 -0.00390625 4.265625 0.046875 C 3.890625 0.0976562 3.5 0.125 3.09375 0.125 C 2.789062 0.125 2.492188 0.0976562 2.203125 0.046875 C 1.921875 -0.00390625 1.664062 -0.09375 1.4375 -0.21875 C 1.21875 -0.351562 1.039062 -0.535156 0.90625 -0.765625 C 0.769531 -0.992188 0.703125 -1.289062 0.703125 -1.65625 C 0.703125 -1.976562 0.769531 -2.25 0.90625 -2.46875 C 1.039062 -2.6875 1.21875 -2.863281 1.4375 -3 C 1.664062 -3.132812 1.921875 -3.234375 2.203125 -3.296875 C 2.484375 -3.359375 2.769531 -3.390625 3.0625 -3.390625 C 3.445312 -3.390625 3.832031 -3.34375 4.21875 -3.25 L 4.21875 -3.53125 C 4.21875 -3.695312 4.195312 -3.859375 4.15625 -4.015625 C 4.125 -4.171875 4.054688 -4.3125 3.953125 -4.4375 C 3.847656 -4.5625 3.707031 -4.660156 3.53125 -4.734375 C 3.363281 -4.816406 3.144531 -4.859375 2.875 -4.859375 C 2.53125 -4.859375 2.226562 -4.832031 1.96875 -4.78125 C 1.71875 -4.738281 1.523438 -4.691406 1.390625 -4.640625 L 1.265625 -5.453125 C 1.398438 -5.523438 1.625 -5.582031 1.9375 -5.625 C 2.257812 -5.675781 2.601562 -5.703125 2.96875 -5.703125 Z M 2.96875 -5.703125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-12">
+<path style="stroke:none;" d="M 4.0625 0.125 C 3.707031 0.125 3.410156 0.078125 3.171875 -0.015625 C 2.941406 -0.109375 2.757812 -0.25 2.625 -0.4375 C 2.488281 -0.632812 2.390625 -0.875 2.328125 -1.15625 C 2.273438 -1.4375 2.25 -1.765625 2.25 -2.140625 L 2.25 -7.421875 L 0.640625 -7.421875 L 0.640625 -8.25 L 3.234375 -8.25 L 3.234375 -2.140625 C 3.234375 -1.867188 3.25 -1.644531 3.28125 -1.46875 C 3.320312 -1.289062 3.378906 -1.144531 3.453125 -1.03125 C 3.535156 -0.925781 3.628906 -0.851562 3.734375 -0.8125 C 3.847656 -0.769531 3.984375 -0.75 4.140625 -0.75 C 4.367188 -0.75 4.582031 -0.773438 4.78125 -0.828125 C 4.988281 -0.890625 5.144531 -0.953125 5.25 -1.015625 L 5.40625 -0.1875 C 5.351562 -0.15625 5.28125 -0.117188 5.1875 -0.078125 C 5.101562 -0.046875 5 -0.015625 4.875 0.015625 C 4.757812 0.046875 4.628906 0.0703125 4.484375 0.09375 C 4.347656 0.113281 4.207031 0.125 4.0625 0.125 Z M 4.0625 0.125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-13">
+<path style="stroke:none;" d="M 2.515625 -6.4375 C 2.304688 -6.4375 2.125 -6.503906 1.96875 -6.640625 C 1.8125 -6.785156 1.734375 -6.984375 1.734375 -7.234375 C 1.734375 -7.484375 1.8125 -7.679688 1.96875 -7.828125 C 2.125 -7.972656 2.304688 -8.046875 2.515625 -8.046875 C 2.722656 -8.046875 2.898438 -7.972656 3.046875 -7.828125 C 3.203125 -7.679688 3.28125 -7.484375 3.28125 -7.234375 C 3.28125 -6.984375 3.203125 -6.785156 3.046875 -6.640625 C 2.898438 -6.503906 2.722656 -6.4375 2.515625 -6.4375 Z M 2.25 -4.734375 L 0.640625 -4.734375 L 0.640625 -5.5625 L 3.234375 -5.5625 L 3.234375 -2.140625 C 3.234375 -1.585938 3.3125 -1.21875 3.46875 -1.03125 C 3.625 -0.84375 3.851562 -0.75 4.15625 -0.75 C 4.382812 -0.75 4.597656 -0.773438 4.796875 -0.828125 C 4.992188 -0.890625 5.144531 -0.953125 5.25 -1.015625 L 5.40625 -0.1875 C 5.351562 -0.15625 5.28125 -0.117188 5.1875 -0.078125 C 5.101562 -0.046875 5.003906 -0.015625 4.890625 0.015625 C 4.773438 0.046875 4.644531 0.0703125 4.5 0.09375 C 4.363281 0.113281 4.21875 0.125 4.0625 0.125 C 3.71875 0.125 3.425781 0.078125 3.1875 -0.015625 C 2.957031 -0.109375 2.769531 -0.25 2.625 -0.4375 C 2.488281 -0.632812 2.390625 -0.875 2.328125 -1.15625 C 2.273438 -1.4375 2.25 -1.765625 2.25 -2.140625 Z M 2.25 -4.734375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-14">
+<path style="stroke:none;" d="M 4.15625 -0.515625 C 4.039062 -0.453125 3.863281 -0.382812 3.625 -0.3125 C 3.394531 -0.238281 3.128906 -0.203125 2.828125 -0.203125 C 2.503906 -0.203125 2.195312 -0.253906 1.90625 -0.359375 C 1.625 -0.472656 1.378906 -0.640625 1.171875 -0.859375 C 0.960938 -1.078125 0.796875 -1.351562 0.671875 -1.6875 C 0.546875 -2.03125 0.484375 -2.4375 0.484375 -2.90625 C 0.484375 -3.3125 0.539062 -3.679688 0.65625 -4.015625 C 0.769531 -4.359375 0.9375 -4.65625 1.15625 -4.90625 C 1.375 -5.15625 1.644531 -5.347656 1.96875 -5.484375 C 2.289062 -5.628906 2.65625 -5.703125 3.0625 -5.703125 C 3.539062 -5.703125 3.945312 -5.664062 4.28125 -5.59375 C 4.625 -5.53125 4.910156 -5.46875 5.140625 -5.40625 L 5.140625 -0.4375 C 5.140625 0.425781 4.921875 1.050781 4.484375 1.4375 C 4.054688 1.820312 3.398438 2.015625 2.515625 2.015625 C 2.160156 2.015625 1.835938 1.984375 1.546875 1.921875 C 1.253906 1.867188 0.992188 1.804688 0.765625 1.734375 L 0.953125 0.859375 C 1.160156 0.941406 1.394531 1.007812 1.65625 1.0625 C 1.925781 1.125 2.222656 1.15625 2.546875 1.15625 C 3.117188 1.15625 3.53125 1.035156 3.78125 0.796875 C 4.03125 0.566406 4.15625 0.191406 4.15625 -0.328125 Z M 4.15625 -4.6875 C 4.0625 -4.71875 3.925781 -4.75 3.75 -4.78125 C 3.582031 -4.8125 3.359375 -4.828125 3.078125 -4.828125 C 2.554688 -4.828125 2.160156 -4.648438 1.890625 -4.296875 C 1.628906 -3.941406 1.5 -3.472656 1.5 -2.890625 C 1.5 -2.566406 1.535156 -2.289062 1.609375 -2.0625 C 1.691406 -1.84375 1.796875 -1.65625 1.921875 -1.5 C 2.054688 -1.351562 2.207031 -1.242188 2.375 -1.171875 C 2.539062 -1.109375 2.722656 -1.078125 2.921875 -1.078125 C 3.160156 -1.078125 3.390625 -1.113281 3.609375 -1.1875 C 3.835938 -1.257812 4.019531 -1.34375 4.15625 -1.4375 Z M 4.15625 -4.6875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-15">
+<path style="stroke:none;" d="M 2.8125 -0.703125 C 3.3125 -0.703125 3.691406 -0.796875 3.953125 -0.984375 C 4.222656 -1.171875 4.359375 -1.457031 4.359375 -1.84375 C 4.359375 -2.082031 4.304688 -2.28125 4.203125 -2.4375 C 4.109375 -2.601562 3.984375 -2.75 3.828125 -2.875 C 3.671875 -3 3.488281 -3.109375 3.28125 -3.203125 C 3.082031 -3.296875 2.878906 -3.378906 2.671875 -3.453125 C 2.429688 -3.546875 2.203125 -3.648438 1.984375 -3.765625 C 1.765625 -3.890625 1.566406 -4.03125 1.390625 -4.1875 C 1.222656 -4.351562 1.085938 -4.546875 0.984375 -4.765625 C 0.890625 -4.984375 0.84375 -5.238281 0.84375 -5.53125 C 0.84375 -6.175781 1.046875 -6.679688 1.453125 -7.046875 C 1.859375 -7.410156 2.425781 -7.59375 3.15625 -7.59375 C 3.351562 -7.59375 3.550781 -7.578125 3.75 -7.546875 C 3.945312 -7.523438 4.128906 -7.492188 4.296875 -7.453125 C 4.460938 -7.410156 4.609375 -7.359375 4.734375 -7.296875 C 4.867188 -7.242188 4.976562 -7.191406 5.0625 -7.140625 L 4.75 -6.3125 C 4.59375 -6.40625 4.375 -6.5 4.09375 -6.59375 C 3.8125 -6.695312 3.5 -6.75 3.15625 -6.75 C 2.789062 -6.75 2.476562 -6.65625 2.21875 -6.46875 C 1.957031 -6.289062 1.828125 -6.019531 1.828125 -5.65625 C 1.828125 -5.457031 1.863281 -5.285156 1.9375 -5.140625 C 2.007812 -4.992188 2.113281 -4.863281 2.25 -4.75 C 2.382812 -4.644531 2.535156 -4.546875 2.703125 -4.453125 C 2.878906 -4.367188 3.070312 -4.285156 3.28125 -4.203125 C 3.59375 -4.078125 3.875 -3.945312 4.125 -3.8125 C 4.375 -3.6875 4.585938 -3.535156 4.765625 -3.359375 C 4.953125 -3.179688 5.09375 -2.972656 5.1875 -2.734375 C 5.289062 -2.492188 5.34375 -2.203125 5.34375 -1.859375 C 5.34375 -1.210938 5.125 -0.710938 4.6875 -0.359375 C 4.25 -0.015625 3.625 0.15625 2.8125 0.15625 C 2.539062 0.15625 2.289062 0.132812 2.0625 0.09375 C 1.832031 0.0625 1.625 0.0195312 1.4375 -0.03125 C 1.257812 -0.09375 1.101562 -0.148438 0.96875 -0.203125 C 0.832031 -0.253906 0.726562 -0.304688 0.65625 -0.359375 L 0.953125 -1.171875 C 1.117188 -1.085938 1.359375 -0.988281 1.671875 -0.875 C 1.984375 -0.757812 2.363281 -0.703125 2.8125 -0.703125 Z M 2.8125 -0.703125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-16">
+<path style="stroke:none;" d="M 3.109375 -5.703125 C 3.859375 -5.703125 4.4375 -5.46875 4.84375 -5 C 5.25 -4.53125 5.453125 -3.820312 5.453125 -2.875 L 5.453125 -2.515625 L 1.46875 -2.515625 C 1.507812 -1.941406 1.703125 -1.503906 2.046875 -1.203125 C 2.390625 -0.898438 2.867188 -0.75 3.484375 -0.75 C 3.835938 -0.75 4.132812 -0.773438 4.375 -0.828125 C 4.625 -0.890625 4.8125 -0.953125 4.9375 -1.015625 L 5.078125 -0.1875 C 4.953125 -0.113281 4.734375 -0.046875 4.421875 0.015625 C 4.109375 0.0859375 3.757812 0.125 3.375 0.125 C 2.894531 0.125 2.472656 0.0507812 2.109375 -0.09375 C 1.742188 -0.238281 1.441406 -0.4375 1.203125 -0.6875 C 0.960938 -0.945312 0.78125 -1.253906 0.65625 -1.609375 C 0.539062 -1.960938 0.484375 -2.347656 0.484375 -2.765625 C 0.484375 -3.265625 0.554688 -3.695312 0.703125 -4.0625 C 0.859375 -4.4375 1.0625 -4.742188 1.3125 -4.984375 C 1.5625 -5.222656 1.835938 -5.398438 2.140625 -5.515625 C 2.453125 -5.640625 2.773438 -5.703125 3.109375 -5.703125 Z M 4.453125 -3.328125 C 4.453125 -3.796875 4.328125 -4.164062 4.078125 -4.4375 C 3.828125 -4.71875 3.5 -4.859375 3.09375 -4.859375 C 2.863281 -4.859375 2.65625 -4.8125 2.46875 -4.71875 C 2.28125 -4.632812 2.117188 -4.519531 1.984375 -4.375 C 1.847656 -4.226562 1.738281 -4.0625 1.65625 -3.875 C 1.570312 -3.695312 1.519531 -3.515625 1.5 -3.328125 Z M 4.453125 -3.328125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-17">
+<path style="stroke:none;" d="M 4.15625 -4.390625 C 4.039062 -4.492188 3.875 -4.59375 3.65625 -4.6875 C 3.445312 -4.78125 3.222656 -4.828125 2.984375 -4.828125 C 2.722656 -4.828125 2.5 -4.773438 2.3125 -4.671875 C 2.125 -4.566406 1.96875 -4.421875 1.84375 -4.234375 C 1.726562 -4.054688 1.640625 -3.84375 1.578125 -3.59375 C 1.523438 -3.34375 1.5 -3.070312 1.5 -2.78125 C 1.5 -2.132812 1.648438 -1.632812 1.953125 -1.28125 C 2.253906 -0.925781 2.648438 -0.75 3.140625 -0.75 C 3.390625 -0.75 3.597656 -0.757812 3.765625 -0.78125 C 3.941406 -0.8125 4.070312 -0.835938 4.15625 -0.859375 Z M 4.15625 -8.140625 L 5.140625 -8.3125 L 5.140625 -0.15625 C 4.929688 -0.09375 4.65625 -0.03125 4.3125 0.03125 C 3.976562 0.09375 3.585938 0.125 3.140625 0.125 C 2.742188 0.125 2.378906 0.0546875 2.046875 -0.078125 C 1.722656 -0.210938 1.441406 -0.40625 1.203125 -0.65625 C 0.972656 -0.90625 0.796875 -1.207031 0.671875 -1.5625 C 0.546875 -1.925781 0.484375 -2.332031 0.484375 -2.78125 C 0.484375 -3.21875 0.535156 -3.613281 0.640625 -3.96875 C 0.742188 -4.320312 0.898438 -4.625 1.109375 -4.875 C 1.316406 -5.132812 1.566406 -5.335938 1.859375 -5.484375 C 2.148438 -5.628906 2.488281 -5.703125 2.875 -5.703125 C 3.164062 -5.703125 3.421875 -5.664062 3.640625 -5.59375 C 3.867188 -5.519531 4.039062 -5.441406 4.15625 -5.359375 Z M 4.15625 -8.140625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-18">
+<path style="stroke:none;" d="M 1.28125 0 L 1.28125 -5.265625 C 2.101562 -5.546875 2.925781 -5.6875 3.75 -5.6875 C 4.007812 -5.6875 4.253906 -5.675781 4.484375 -5.65625 C 4.722656 -5.632812 4.976562 -5.59375 5.25 -5.53125 L 5.078125 -4.65625 C 4.816406 -4.726562 4.585938 -4.773438 4.390625 -4.796875 C 4.203125 -4.816406 3.988281 -4.828125 3.75 -4.828125 C 3.269531 -4.828125 2.773438 -4.757812 2.265625 -4.625 L 2.265625 0 Z M 1.28125 0 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-19">
+<path style="stroke:none;" d="M 0.609375 1.046875 C 0.679688 1.085938 0.78125 1.117188 0.90625 1.140625 C 1.039062 1.160156 1.164062 1.171875 1.28125 1.171875 C 1.675781 1.171875 1.984375 1.082031 2.203125 0.90625 C 2.421875 0.738281 2.625 0.460938 2.8125 0.078125 C 2.363281 -0.773438 1.941406 -1.6875 1.546875 -2.65625 C 1.148438 -3.625 0.828125 -4.59375 0.578125 -5.5625 L 1.65625 -5.5625 C 1.738281 -5.25 1.832031 -4.90625 1.9375 -4.53125 C 2.039062 -4.15625 2.160156 -3.769531 2.296875 -3.375 C 2.441406 -2.988281 2.585938 -2.597656 2.734375 -2.203125 C 2.890625 -1.804688 3.054688 -1.425781 3.234375 -1.0625 C 3.367188 -1.4375 3.488281 -1.800781 3.59375 -2.15625 C 3.707031 -2.519531 3.8125 -2.882812 3.90625 -3.25 C 4.007812 -3.613281 4.109375 -3.984375 4.203125 -4.359375 C 4.296875 -4.742188 4.394531 -5.144531 4.5 -5.5625 L 5.53125 -5.5625 C 5.269531 -4.53125 4.984375 -3.523438 4.671875 -2.546875 C 4.359375 -1.566406 4.019531 -0.660156 3.65625 0.171875 C 3.519531 0.484375 3.375 0.753906 3.21875 0.984375 C 3.0625 1.222656 2.890625 1.414062 2.703125 1.5625 C 2.523438 1.71875 2.316406 1.832031 2.078125 1.90625 C 1.847656 1.976562 1.585938 2.015625 1.296875 2.015625 C 1.140625 2.015625 0.972656 1.992188 0.796875 1.953125 C 0.617188 1.910156 0.5 1.875 0.4375 1.84375 Z M 0.609375 1.046875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-20">
+<path style="stroke:none;" d="M 0.34375 -3.71875 C 0.34375 -4.382812 0.40625 -4.960938 0.53125 -5.453125 C 0.664062 -5.941406 0.847656 -6.34375 1.078125 -6.65625 C 1.304688 -6.96875 1.582031 -7.203125 1.90625 -7.359375 C 2.238281 -7.515625 2.601562 -7.59375 3 -7.59375 C 3.394531 -7.59375 3.753906 -7.515625 4.078125 -7.359375 C 4.410156 -7.203125 4.691406 -6.96875 4.921875 -6.65625 C 5.148438 -6.34375 5.328125 -5.941406 5.453125 -5.453125 C 5.585938 -4.960938 5.65625 -4.382812 5.65625 -3.71875 C 5.65625 -3.050781 5.585938 -2.472656 5.453125 -1.984375 C 5.328125 -1.503906 5.148438 -1.101562 4.921875 -0.78125 C 4.691406 -0.457031 4.410156 -0.21875 4.078125 -0.0625 C 3.753906 0.0820312 3.394531 0.15625 3 0.15625 C 2.601562 0.15625 2.238281 0.0820312 1.90625 -0.0625 C 1.582031 -0.21875 1.304688 -0.457031 1.078125 -0.78125 C 0.847656 -1.101562 0.664062 -1.503906 0.53125 -1.984375 C 0.40625 -2.472656 0.34375 -3.050781 0.34375 -3.71875 Z M 1.359375 -3.71875 C 1.359375 -2.738281 1.488281 -1.988281 1.75 -1.46875 C 2.007812 -0.957031 2.414062 -0.703125 2.96875 -0.703125 C 3.53125 -0.703125 3.953125 -0.957031 4.234375 -1.46875 C 4.515625 -1.988281 4.65625 -2.738281 4.65625 -3.71875 C 4.65625 -4.695312 4.515625 -5.445312 4.234375 -5.96875 C 3.953125 -6.488281 3.53125 -6.75 2.96875 -6.75 C 2.414062 -6.75 2.007812 -6.488281 1.75 -5.96875 C 1.488281 -5.445312 1.359375 -4.695312 1.359375 -3.71875 Z M 1.359375 -3.71875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-21">
+<path style="stroke:none;" d="M 5.140625 -0.15625 C 4.929688 -0.101562 4.644531 -0.046875 4.28125 0.015625 C 3.925781 0.0859375 3.507812 0.125 3.03125 0.125 C 2.613281 0.125 2.265625 0.0625 1.984375 -0.0625 C 1.703125 -0.1875 1.472656 -0.363281 1.296875 -0.59375 C 1.117188 -0.820312 0.992188 -1.09375 0.921875 -1.40625 C 0.847656 -1.71875 0.8125 -2.0625 0.8125 -2.4375 L 0.8125 -5.5625 L 1.796875 -5.5625 L 1.796875 -2.65625 C 1.796875 -1.96875 1.894531 -1.476562 2.09375 -1.1875 C 2.300781 -0.894531 2.644531 -0.75 3.125 -0.75 C 3.226562 -0.75 3.332031 -0.753906 3.4375 -0.765625 C 3.550781 -0.773438 3.65625 -0.785156 3.75 -0.796875 C 3.851562 -0.804688 3.9375 -0.816406 4 -0.828125 C 4.070312 -0.847656 4.125 -0.859375 4.15625 -0.859375 L 4.15625 -5.5625 L 5.140625 -5.5625 Z M 5.140625 -0.15625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-22">
+<path style="stroke:none;" d="M 2.921875 -5.5625 L 5.265625 -5.5625 L 5.265625 -4.734375 L 2.921875 -4.734375 L 2.921875 -2.140625 C 2.921875 -1.867188 2.9375 -1.644531 2.96875 -1.46875 C 3.007812 -1.289062 3.078125 -1.144531 3.171875 -1.03125 C 3.265625 -0.925781 3.382812 -0.851562 3.53125 -0.8125 C 3.675781 -0.769531 3.851562 -0.75 4.0625 -0.75 C 4.34375 -0.75 4.570312 -0.773438 4.75 -0.828125 C 4.925781 -0.878906 5.09375 -0.941406 5.25 -1.015625 L 5.40625 -0.1875 C 5.289062 -0.132812 5.109375 -0.0703125 4.859375 0 C 4.617188 0.0820312 4.316406 0.125 3.953125 0.125 C 3.546875 0.125 3.207031 0.078125 2.9375 -0.015625 C 2.675781 -0.109375 2.46875 -0.25 2.3125 -0.4375 C 2.164062 -0.632812 2.066406 -0.875 2.015625 -1.15625 C 1.960938 -1.4375 1.9375 -1.765625 1.9375 -2.140625 L 1.9375 -4.734375 L 0.75 -4.734375 L 0.75 -5.5625 L 1.9375 -5.5625 L 1.9375 -7.125 L 2.921875 -7.296875 Z M 2.921875 -5.5625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-23">
+<path style="stroke:none;" d="M 4.5 -2.765625 C 4.5 -3.421875 4.347656 -3.925781 4.046875 -4.28125 C 3.742188 -4.632812 3.347656 -4.8125 2.859375 -4.8125 C 2.585938 -4.8125 2.375 -4.796875 2.21875 -4.765625 C 2.0625 -4.742188 1.9375 -4.71875 1.84375 -4.6875 L 1.84375 -1.171875 C 1.957031 -1.066406 2.117188 -0.96875 2.328125 -0.875 C 2.546875 -0.789062 2.773438 -0.75 3.015625 -0.75 C 3.273438 -0.75 3.5 -0.800781 3.6875 -0.90625 C 3.875 -1.007812 4.023438 -1.148438 4.140625 -1.328125 C 4.265625 -1.515625 4.351562 -1.726562 4.40625 -1.96875 C 4.46875 -2.21875 4.5 -2.484375 4.5 -2.765625 Z M 5.515625 -2.765625 C 5.515625 -2.347656 5.460938 -1.957031 5.359375 -1.59375 C 5.253906 -1.238281 5.097656 -0.929688 4.890625 -0.671875 C 4.679688 -0.421875 4.429688 -0.222656 4.140625 -0.078125 C 3.847656 0.0546875 3.507812 0.125 3.125 0.125 C 2.832031 0.125 2.570312 0.0859375 2.34375 0.015625 C 2.125 -0.046875 1.957031 -0.125 1.84375 -0.21875 L 1.84375 1.984375 L 0.859375 1.984375 L 0.859375 -5.40625 C 1.066406 -5.46875 1.34375 -5.53125 1.6875 -5.59375 C 2.03125 -5.65625 2.421875 -5.6875 2.859375 -5.6875 C 3.253906 -5.6875 3.613281 -5.617188 3.9375 -5.484375 C 4.269531 -5.347656 4.550781 -5.15625 4.78125 -4.90625 C 5.019531 -4.65625 5.203125 -4.347656 5.328125 -3.984375 C 5.453125 -3.617188 5.515625 -3.210938 5.515625 -2.765625 Z M 5.515625 -2.765625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph1-24">
+<path style="stroke:none;" d="M 3.015625 -3.734375 L 4.15625 -7.421875 L 5.09375 -7.421875 C 5.25 -6.253906 5.359375 -5.054688 5.421875 -3.828125 C 5.492188 -2.609375 5.554688 -1.332031 5.609375 0 L 4.65625 0 C 4.644531 -0.425781 4.632812 -0.890625 4.625 -1.390625 C 4.625 -1.898438 4.613281 -2.421875 4.59375 -2.953125 C 4.582031 -3.492188 4.570312 -4.039062 4.5625 -4.59375 C 4.550781 -5.144531 4.539062 -5.679688 4.53125 -6.203125 L 3.4375 -2.8125 L 2.578125 -2.8125 L 1.46875 -6.203125 C 1.46875 -5.679688 1.457031 -5.144531 1.4375 -4.59375 C 1.425781 -4.050781 1.414062 -3.507812 1.40625 -2.96875 C 1.394531 -2.425781 1.382812 -1.898438 1.375 -1.390625 C 1.363281 -0.890625 1.351562 -0.425781 1.34375 0 L 0.390625 0 C 0.410156 -0.601562 0.4375 -1.222656 0.46875 -1.859375 C 0.5 -2.503906 0.535156 -3.144531 0.578125 -3.78125 C 0.617188 -4.414062 0.671875 -5.039062 0.734375 -5.65625 C 0.796875 -6.269531 0.863281 -6.859375 0.9375 -7.421875 L 1.84375 -7.421875 Z M 3.015625 -3.734375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-0">
+<path style="stroke:none;" d="M 0.640625 2.296875 L 0.640625 -9.171875 L 7.140625 -9.171875 L 7.140625 2.296875 Z M 1.375 1.578125 L 6.421875 1.578125 L 6.421875 -8.4375 L 1.375 -8.4375 Z M 1.375 1.578125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-1">
+<path style="stroke:none;" d="M 6.34375 -6.84375 L 6.34375 -5.75 C 6.007812 -5.925781 5.675781 -6.0625 5.34375 -6.15625 C 5.007812 -6.25 4.675781 -6.296875 4.34375 -6.296875 C 3.582031 -6.296875 2.992188 -6.050781 2.578125 -5.5625 C 2.160156 -5.082031 1.953125 -4.410156 1.953125 -3.546875 C 1.953125 -2.679688 2.160156 -2.007812 2.578125 -1.53125 C 2.992188 -1.050781 3.582031 -0.8125 4.34375 -0.8125 C 4.675781 -0.8125 5.007812 -0.851562 5.34375 -0.9375 C 5.675781 -1.03125 6.007812 -1.171875 6.34375 -1.359375 L 6.34375 -0.265625 C 6.019531 -0.117188 5.679688 -0.0078125 5.328125 0.0625 C 4.984375 0.144531 4.613281 0.1875 4.21875 0.1875 C 3.144531 0.1875 2.289062 -0.144531 1.65625 -0.8125 C 1.03125 -1.488281 0.71875 -2.398438 0.71875 -3.546875 C 0.71875 -4.703125 1.035156 -5.613281 1.671875 -6.28125 C 2.304688 -6.945312 3.179688 -7.28125 4.296875 -7.28125 C 4.648438 -7.28125 5 -7.242188 5.34375 -7.171875 C 5.6875 -7.097656 6.019531 -6.988281 6.34375 -6.84375 Z M 6.34375 -6.84375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-2">
+<path style="stroke:none;" d="M 5.34375 -6.015625 C 5.207031 -6.085938 5.0625 -6.140625 4.90625 -6.171875 C 4.757812 -6.210938 4.59375 -6.234375 4.40625 -6.234375 C 3.75 -6.234375 3.242188 -6.019531 2.890625 -5.59375 C 2.535156 -5.164062 2.359375 -4.550781 2.359375 -3.75 L 2.359375 0 L 1.1875 0 L 1.1875 -7.109375 L 2.359375 -7.109375 L 2.359375 -6 C 2.597656 -6.4375 2.914062 -6.757812 3.3125 -6.96875 C 3.707031 -7.175781 4.1875 -7.28125 4.75 -7.28125 C 4.832031 -7.28125 4.921875 -7.273438 5.015625 -7.265625 C 5.109375 -7.253906 5.21875 -7.238281 5.34375 -7.21875 Z M 5.34375 -6.015625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-3">
+<path style="stroke:none;" d="M 3.984375 -6.296875 C 3.359375 -6.296875 2.863281 -6.050781 2.5 -5.5625 C 2.132812 -5.070312 1.953125 -4.398438 1.953125 -3.546875 C 1.953125 -2.691406 2.128906 -2.019531 2.484375 -1.53125 C 2.847656 -1.050781 3.347656 -0.8125 3.984375 -0.8125 C 4.597656 -0.8125 5.085938 -1.054688 5.453125 -1.546875 C 5.816406 -2.035156 6 -2.703125 6 -3.546875 C 6 -4.390625 5.816406 -5.054688 5.453125 -5.546875 C 5.085938 -6.046875 4.597656 -6.296875 3.984375 -6.296875 Z M 3.984375 -7.28125 C 4.992188 -7.28125 5.789062 -6.945312 6.375 -6.28125 C 6.957031 -5.625 7.25 -4.710938 7.25 -3.546875 C 7.25 -2.378906 6.957031 -1.460938 6.375 -0.796875 C 5.789062 -0.140625 4.992188 0.1875 3.984375 0.1875 C 2.960938 0.1875 2.160156 -0.140625 1.578125 -0.796875 C 1.003906 -1.460938 0.71875 -2.378906 0.71875 -3.546875 C 0.71875 -4.710938 1.003906 -5.625 1.578125 -6.28125 C 2.160156 -6.945312 2.960938 -7.28125 3.984375 -7.28125 Z M 3.984375 -7.28125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-4">
+<path style="stroke:none;" d="M 2.359375 -1.0625 L 2.359375 2.703125 L 1.1875 2.703125 L 1.1875 -7.109375 L 2.359375 -7.109375 L 2.359375 -6.03125 C 2.597656 -6.457031 2.90625 -6.769531 3.28125 -6.96875 C 3.65625 -7.175781 4.101562 -7.28125 4.625 -7.28125 C 5.488281 -7.28125 6.191406 -6.9375 6.734375 -6.25 C 7.273438 -5.5625 7.546875 -4.660156 7.546875 -3.546875 C 7.546875 -2.429688 7.273438 -1.53125 6.734375 -0.84375 C 6.191406 -0.15625 5.488281 0.1875 4.625 0.1875 C 4.101562 0.1875 3.65625 0.0820312 3.28125 -0.125 C 2.90625 -0.332031 2.597656 -0.644531 2.359375 -1.0625 Z M 6.328125 -3.546875 C 6.328125 -4.410156 6.148438 -5.082031 5.796875 -5.5625 C 5.441406 -6.050781 4.957031 -6.296875 4.34375 -6.296875 C 3.726562 -6.296875 3.242188 -6.050781 2.890625 -5.5625 C 2.535156 -5.082031 2.359375 -4.410156 2.359375 -3.546875 C 2.359375 -2.691406 2.535156 -2.019531 2.890625 -1.53125 C 3.242188 -1.039062 3.726562 -0.796875 4.34375 -0.796875 C 4.957031 -0.796875 5.441406 -1.039062 5.796875 -1.53125 C 6.148438 -2.019531 6.328125 -2.691406 6.328125 -3.546875 Z M 6.328125 -3.546875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-5">
+<path style="stroke:none;" d="M 5.75 -6.90625 L 5.75 -5.796875 C 5.425781 -5.960938 5.085938 -6.085938 4.734375 -6.171875 C 4.378906 -6.253906 4.007812 -6.296875 3.625 -6.296875 C 3.039062 -6.296875 2.601562 -6.207031 2.3125 -6.03125 C 2.03125 -5.851562 1.890625 -5.585938 1.890625 -5.234375 C 1.890625 -4.960938 1.988281 -4.75 2.1875 -4.59375 C 2.394531 -4.445312 2.816406 -4.300781 3.453125 -4.15625 L 3.84375 -4.0625 C 4.675781 -3.882812 5.265625 -3.632812 5.609375 -3.3125 C 5.960938 -2.988281 6.140625 -2.539062 6.140625 -1.96875 C 6.140625 -1.300781 5.878906 -0.773438 5.359375 -0.390625 C 4.835938 -0.00390625 4.117188 0.1875 3.203125 0.1875 C 2.816406 0.1875 2.414062 0.148438 2 0.078125 C 1.59375 0.00390625 1.160156 -0.109375 0.703125 -0.265625 L 0.703125 -1.46875 C 1.140625 -1.238281 1.566406 -1.066406 1.984375 -0.953125 C 2.398438 -0.847656 2.8125 -0.796875 3.21875 -0.796875 C 3.769531 -0.796875 4.191406 -0.890625 4.484375 -1.078125 C 4.785156 -1.265625 4.9375 -1.53125 4.9375 -1.875 C 4.9375 -2.1875 4.828125 -2.425781 4.609375 -2.59375 C 4.398438 -2.769531 3.9375 -2.9375 3.21875 -3.09375 L 2.8125 -3.1875 C 2.082031 -3.34375 1.554688 -3.578125 1.234375 -3.890625 C 0.910156 -4.203125 0.75 -4.632812 0.75 -5.1875 C 0.75 -5.851562 0.984375 -6.367188 1.453125 -6.734375 C 1.929688 -7.097656 2.609375 -7.28125 3.484375 -7.28125 C 3.910156 -7.28125 4.316406 -7.25 4.703125 -7.1875 C 5.085938 -7.125 5.4375 -7.03125 5.75 -6.90625 Z M 5.75 -6.90625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-6">
+<path style="stroke:none;" d="M 4.453125 -3.578125 C 3.515625 -3.578125 2.863281 -3.46875 2.5 -3.25 C 2.132812 -3.03125 1.953125 -2.660156 1.953125 -2.140625 C 1.953125 -1.734375 2.085938 -1.40625 2.359375 -1.15625 C 2.628906 -0.914062 3 -0.796875 3.46875 -0.796875 C 4.113281 -0.796875 4.632812 -1.023438 5.03125 -1.484375 C 5.425781 -1.941406 5.625 -2.550781 5.625 -3.3125 L 5.625 -3.578125 Z M 6.78125 -4.0625 L 6.78125 0 L 5.625 0 L 5.625 -1.078125 C 5.351562 -0.648438 5.019531 -0.332031 4.625 -0.125 C 4.226562 0.0820312 3.738281 0.1875 3.15625 0.1875 C 2.425781 0.1875 1.847656 -0.015625 1.421875 -0.421875 C 0.992188 -0.835938 0.78125 -1.382812 0.78125 -2.0625 C 0.78125 -2.863281 1.046875 -3.46875 1.578125 -3.875 C 2.117188 -4.28125 2.921875 -4.484375 3.984375 -4.484375 L 5.625 -4.484375 L 5.625 -4.609375 C 5.625 -5.140625 5.445312 -5.550781 5.09375 -5.84375 C 4.738281 -6.144531 4.238281 -6.296875 3.59375 -6.296875 C 3.1875 -6.296875 2.789062 -6.242188 2.40625 -6.140625 C 2.019531 -6.046875 1.648438 -5.898438 1.296875 -5.703125 L 1.296875 -6.78125 C 1.722656 -6.945312 2.140625 -7.070312 2.546875 -7.15625 C 2.953125 -7.238281 3.34375 -7.28125 3.71875 -7.28125 C 4.75 -7.28125 5.515625 -7.015625 6.015625 -6.484375 C 6.523438 -5.953125 6.78125 -5.144531 6.78125 -4.0625 Z M 6.78125 -4.0625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-7">
+<path style="stroke:none;" d="M 1.21875 -9.875 L 2.390625 -9.875 L 2.390625 0 L 1.21875 0 Z M 1.21875 -9.875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-8">
+<path style="stroke:none;" d="M 7.3125 -3.84375 L 7.3125 -3.28125 L 1.9375 -3.28125 C 1.988281 -2.46875 2.226562 -1.851562 2.65625 -1.4375 C 3.09375 -1.019531 3.695312 -0.8125 4.46875 -0.8125 C 4.914062 -0.8125 5.347656 -0.863281 5.765625 -0.96875 C 6.191406 -1.082031 6.613281 -1.25 7.03125 -1.46875 L 7.03125 -0.359375 C 6.613281 -0.179688 6.179688 -0.046875 5.734375 0.046875 C 5.296875 0.140625 4.851562 0.1875 4.40625 0.1875 C 3.269531 0.1875 2.367188 -0.140625 1.703125 -0.796875 C 1.046875 -1.460938 0.71875 -2.359375 0.71875 -3.484375 C 0.71875 -4.648438 1.03125 -5.570312 1.65625 -6.25 C 2.289062 -6.9375 3.140625 -7.28125 4.203125 -7.28125 C 5.160156 -7.28125 5.914062 -6.972656 6.46875 -6.359375 C 7.03125 -5.742188 7.3125 -4.90625 7.3125 -3.84375 Z M 6.140625 -4.1875 C 6.128906 -4.820312 5.945312 -5.332031 5.59375 -5.71875 C 5.25 -6.101562 4.789062 -6.296875 4.21875 -6.296875 C 3.5625 -6.296875 3.035156 -6.109375 2.640625 -5.734375 C 2.253906 -5.367188 2.03125 -4.851562 1.96875 -4.1875 Z M 6.140625 -4.1875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-9">
+<path style="stroke:none;" d="M 6.328125 -3.546875 C 6.328125 -4.410156 6.148438 -5.082031 5.796875 -5.5625 C 5.441406 -6.050781 4.957031 -6.296875 4.34375 -6.296875 C 3.726562 -6.296875 3.242188 -6.050781 2.890625 -5.5625 C 2.535156 -5.082031 2.359375 -4.410156 2.359375 -3.546875 C 2.359375 -2.691406 2.535156 -2.019531 2.890625 -1.53125 C 3.242188 -1.039062 3.726562 -0.796875 4.34375 -0.796875 C 4.957031 -0.796875 5.441406 -1.039062 5.796875 -1.53125 C 6.148438 -2.019531 6.328125 -2.691406 6.328125 -3.546875 Z M 2.359375 -6.03125 C 2.597656 -6.457031 2.90625 -6.769531 3.28125 -6.96875 C 3.65625 -7.175781 4.101562 -7.28125 4.625 -7.28125 C 5.488281 -7.28125 6.191406 -6.9375 6.734375 -6.25 C 7.273438 -5.5625 7.546875 -4.660156 7.546875 -3.546875 C 7.546875 -2.429688 7.273438 -1.53125 6.734375 -0.84375 C 6.191406 -0.15625 5.488281 0.1875 4.625 0.1875 C 4.101562 0.1875 3.65625 0.0820312 3.28125 -0.125 C 2.90625 -0.332031 2.597656 -0.644531 2.359375 -1.0625 L 2.359375 0 L 1.1875 0 L 1.1875 -9.875 L 2.359375 -9.875 Z M 2.359375 -6.03125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-10">
+<path style="stroke:none;" d="M 1.21875 -7.109375 L 2.390625 -7.109375 L 2.390625 0 L 1.21875 0 Z M 1.21875 -9.875 L 2.390625 -9.875 L 2.390625 -8.390625 L 1.21875 -8.390625 Z M 1.21875 -9.875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-11">
+<path style="stroke:none;" d="M 7.140625 -4.296875 L 7.140625 0 L 5.96875 0 L 5.96875 -4.25 C 5.96875 -4.925781 5.835938 -5.429688 5.578125 -5.765625 C 5.316406 -6.097656 4.921875 -6.265625 4.390625 -6.265625 C 3.765625 -6.265625 3.269531 -6.0625 2.90625 -5.65625 C 2.539062 -5.257812 2.359375 -4.710938 2.359375 -4.015625 L 2.359375 0 L 1.1875 0 L 1.1875 -7.109375 L 2.359375 -7.109375 L 2.359375 -6 C 2.640625 -6.425781 2.96875 -6.742188 3.34375 -6.953125 C 3.71875 -7.171875 4.15625 -7.28125 4.65625 -7.28125 C 5.46875 -7.28125 6.082031 -7.023438 6.5 -6.515625 C 6.925781 -6.015625 7.140625 -5.273438 7.140625 -4.296875 Z M 7.140625 -4.296875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-12">
+<path style="stroke:none;" d="M 5.90625 -3.640625 C 5.90625 -4.484375 5.726562 -5.132812 5.375 -5.59375 C 5.03125 -6.0625 4.539062 -6.296875 3.90625 -6.296875 C 3.28125 -6.296875 2.789062 -6.0625 2.4375 -5.59375 C 2.09375 -5.132812 1.921875 -4.484375 1.921875 -3.640625 C 1.921875 -2.796875 2.09375 -2.140625 2.4375 -1.671875 C 2.789062 -1.210938 3.28125 -0.984375 3.90625 -0.984375 C 4.539062 -0.984375 5.03125 -1.210938 5.375 -1.671875 C 5.726562 -2.140625 5.90625 -2.796875 5.90625 -3.640625 Z M 7.078125 -0.875 C 7.078125 0.332031 6.804688 1.226562 6.265625 1.8125 C 5.722656 2.40625 4.898438 2.703125 3.796875 2.703125 C 3.390625 2.703125 3.003906 2.671875 2.640625 2.609375 C 2.273438 2.546875 1.921875 2.453125 1.578125 2.328125 L 1.578125 1.1875 C 1.921875 1.375 2.257812 1.507812 2.59375 1.59375 C 2.925781 1.6875 3.265625 1.734375 3.609375 1.734375 C 4.378906 1.734375 4.953125 1.535156 5.328125 1.140625 C 5.710938 0.742188 5.90625 0.140625 5.90625 -0.671875 L 5.90625 -1.25 C 5.664062 -0.832031 5.351562 -0.519531 4.96875 -0.3125 C 4.59375 -0.101562 4.144531 0 3.625 0 C 2.75 0 2.046875 -0.332031 1.515625 -1 C 0.984375 -1.664062 0.71875 -2.546875 0.71875 -3.640625 C 0.71875 -4.734375 0.984375 -5.613281 1.515625 -6.28125 C 2.046875 -6.945312 2.75 -7.28125 3.625 -7.28125 C 4.144531 -7.28125 4.59375 -7.175781 4.96875 -6.96875 C 5.351562 -6.757812 5.664062 -6.445312 5.90625 -6.03125 L 5.90625 -7.109375 L 7.078125 -7.109375 Z M 7.078125 -0.875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-13">
+<path style="stroke:none;" d="M 5.125 -8.609375 C 4.1875 -8.609375 3.441406 -8.257812 2.890625 -7.5625 C 2.347656 -6.875 2.078125 -5.929688 2.078125 -4.734375 C 2.078125 -3.535156 2.347656 -2.585938 2.890625 -1.890625 C 3.441406 -1.203125 4.1875 -0.859375 5.125 -0.859375 C 6.050781 -0.859375 6.785156 -1.203125 7.328125 -1.890625 C 7.878906 -2.585938 8.15625 -3.535156 8.15625 -4.734375 C 8.15625 -5.929688 7.878906 -6.875 7.328125 -7.5625 C 6.785156 -8.257812 6.050781 -8.609375 5.125 -8.609375 Z M 5.125 -9.65625 C 6.445312 -9.65625 7.503906 -9.207031 8.296875 -8.3125 C 9.097656 -7.414062 9.5 -6.222656 9.5 -4.734375 C 9.5 -3.234375 9.097656 -2.035156 8.296875 -1.140625 C 7.503906 -0.253906 6.445312 0.1875 5.125 0.1875 C 3.789062 0.1875 2.722656 -0.253906 1.921875 -1.140625 C 1.128906 -2.035156 0.734375 -3.234375 0.734375 -4.734375 C 0.734375 -6.222656 1.128906 -7.414062 1.921875 -8.3125 C 2.722656 -9.207031 3.789062 -9.65625 5.125 -9.65625 Z M 5.125 -9.65625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-14">
+<path style="stroke:none;" d="M 1.109375 -2.8125 L 1.109375 -7.109375 L 2.265625 -7.109375 L 2.265625 -2.84375 C 2.265625 -2.175781 2.394531 -1.671875 2.65625 -1.328125 C 2.925781 -0.992188 3.320312 -0.828125 3.84375 -0.828125 C 4.476562 -0.828125 4.976562 -1.023438 5.34375 -1.421875 C 5.707031 -1.828125 5.890625 -2.378906 5.890625 -3.078125 L 5.890625 -7.109375 L 7.0625 -7.109375 L 7.0625 0 L 5.890625 0 L 5.890625 -1.09375 C 5.609375 -0.65625 5.28125 -0.332031 4.90625 -0.125 C 4.53125 0.0820312 4.09375 0.1875 3.59375 0.1875 C 2.78125 0.1875 2.160156 -0.0664062 1.734375 -0.578125 C 1.316406 -1.085938 1.109375 -1.832031 1.109375 -2.8125 Z M 4.046875 -7.28125 Z M 4.046875 -7.28125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-15">
+<path style="stroke:none;" d="M 2.375 -9.125 L 2.375 -7.109375 L 4.78125 -7.109375 L 4.78125 -6.203125 L 2.375 -6.203125 L 2.375 -2.34375 C 2.375 -1.757812 2.453125 -1.382812 2.609375 -1.21875 C 2.773438 -1.0625 3.101562 -0.984375 3.59375 -0.984375 L 4.78125 -0.984375 L 4.78125 0 L 3.59375 0 C 2.6875 0 2.0625 -0.164062 1.71875 -0.5 C 1.375 -0.84375 1.203125 -1.457031 1.203125 -2.34375 L 1.203125 -6.203125 L 0.34375 -6.203125 L 0.34375 -7.109375 L 1.203125 -7.109375 L 1.203125 -9.125 Z M 2.375 -9.125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-16">
+<path style="stroke:none;" d=""/>
+</symbol>
+<symbol overflow="visible" id="glyph2-17">
+<path style="stroke:none;" d="M 1.28125 -9.484375 L 6.71875 -9.484375 L 6.71875 -8.390625 L 2.5625 -8.390625 L 2.5625 -5.609375 L 6.3125 -5.609375 L 6.3125 -4.53125 L 2.5625 -4.53125 L 2.5625 0 L 1.28125 0 Z M 1.28125 -9.484375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-18">
+<path style="stroke:none;" d="M 6.765625 -5.75 C 7.054688 -6.269531 7.40625 -6.65625 7.8125 -6.90625 C 8.21875 -7.15625 8.695312 -7.28125 9.25 -7.28125 C 9.988281 -7.28125 10.554688 -7.019531 10.953125 -6.5 C 11.359375 -5.976562 11.5625 -5.242188 11.5625 -4.296875 L 11.5625 0 L 10.390625 0 L 10.390625 -4.25 C 10.390625 -4.9375 10.265625 -5.441406 10.015625 -5.765625 C 9.773438 -6.097656 9.410156 -6.265625 8.921875 -6.265625 C 8.316406 -6.265625 7.835938 -6.0625 7.484375 -5.65625 C 7.128906 -5.257812 6.953125 -4.710938 6.953125 -4.015625 L 6.953125 0 L 5.78125 0 L 5.78125 -4.25 C 5.78125 -4.9375 5.660156 -5.441406 5.421875 -5.765625 C 5.179688 -6.097656 4.804688 -6.265625 4.296875 -6.265625 C 3.703125 -6.265625 3.226562 -6.0625 2.875 -5.65625 C 2.53125 -5.25 2.359375 -4.703125 2.359375 -4.015625 L 2.359375 0 L 1.1875 0 L 1.1875 -7.109375 L 2.359375 -7.109375 L 2.359375 -6 C 2.617188 -6.4375 2.9375 -6.757812 3.3125 -6.96875 C 3.6875 -7.175781 4.128906 -7.28125 4.640625 -7.28125 C 5.160156 -7.28125 5.597656 -7.148438 5.953125 -6.890625 C 6.316406 -6.628906 6.585938 -6.25 6.765625 -5.75 Z M 6.765625 -5.75 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-19">
+<path style="stroke:none;" d="M 6.953125 -9.171875 L 6.953125 -7.921875 C 6.472656 -8.148438 6.015625 -8.320312 5.578125 -8.4375 C 5.148438 -8.550781 4.734375 -8.609375 4.328125 -8.609375 C 3.628906 -8.609375 3.085938 -8.472656 2.703125 -8.203125 C 2.328125 -7.929688 2.140625 -7.546875 2.140625 -7.046875 C 2.140625 -6.628906 2.265625 -6.3125 2.515625 -6.09375 C 2.773438 -5.882812 3.253906 -5.710938 3.953125 -5.578125 L 4.734375 -5.421875 C 5.679688 -5.234375 6.382812 -4.910156 6.84375 -4.453125 C 7.300781 -3.992188 7.53125 -3.378906 7.53125 -2.609375 C 7.53125 -1.691406 7.222656 -0.992188 6.609375 -0.515625 C 5.992188 -0.046875 5.085938 0.1875 3.890625 0.1875 C 3.441406 0.1875 2.960938 0.132812 2.453125 0.03125 C 1.953125 -0.0703125 1.429688 -0.222656 0.890625 -0.421875 L 0.890625 -1.734375 C 1.410156 -1.441406 1.921875 -1.222656 2.421875 -1.078125 C 2.921875 -0.929688 3.410156 -0.859375 3.890625 -0.859375 C 4.628906 -0.859375 5.195312 -1 5.59375 -1.28125 C 5.988281 -1.570312 6.1875 -1.984375 6.1875 -2.515625 C 6.1875 -2.984375 6.039062 -3.347656 5.75 -3.609375 C 5.46875 -3.867188 5.003906 -4.066406 4.359375 -4.203125 L 3.578125 -4.359375 C 2.617188 -4.546875 1.925781 -4.84375 1.5 -5.25 C 1.070312 -5.65625 0.859375 -6.21875 0.859375 -6.9375 C 0.859375 -7.78125 1.148438 -8.441406 1.734375 -8.921875 C 2.328125 -9.410156 3.144531 -9.65625 4.1875 -9.65625 C 4.625 -9.65625 5.070312 -9.613281 5.53125 -9.53125 C 6 -9.445312 6.472656 -9.328125 6.953125 -9.171875 Z M 6.953125 -9.171875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph2-20">
+<path style="stroke:none;" d="M 4.1875 0.65625 C 3.851562 1.507812 3.53125 2.0625 3.21875 2.3125 C 2.90625 2.570312 2.488281 2.703125 1.96875 2.703125 L 1.03125 2.703125 L 1.03125 1.734375 L 1.71875 1.734375 C 2.039062 1.734375 2.289062 1.65625 2.46875 1.5 C 2.644531 1.34375 2.835938 0.984375 3.046875 0.421875 L 3.265625 -0.109375 L 0.390625 -7.109375 L 1.625 -7.109375 L 3.84375 -1.546875 L 6.0625 -7.109375 L 7.3125 -7.109375 Z M 4.1875 0.65625 "/>
+</symbol>
+</g>
+</defs>
+<g id="surface268880">
+<rect x="0" y="0" width="774" height="152" style="fill:rgb(100%,100%,100%);fill-opacity:1;stroke:none;"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 21.75297 10.408118 L 26.433829 10.408118 L 26.433829 12.281165 L 21.75297 12.281165 Z M 21.75297 10.408118 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 29.079728 10.51222 L 32.829728 10.51222 L 32.829728 12.149915 L 29.079728 12.149915 Z M 29.079728 10.51222 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-1" x="20.171875" y="57.705621"/>
+  <use xlink:href="#glyph0-2" x="30.171875" y="57.705621"/>
+  <use xlink:href="#glyph0-3" x="40.171875" y="57.705621"/>
+  <use xlink:href="#glyph0-4" x="50.171875" y="57.705621"/>
+  <use xlink:href="#glyph0-5" x="60.171875" y="57.705621"/>
+  <use xlink:href="#glyph0-6" x="70.171875" y="57.705621"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-7" x="174.203125" y="60.053277"/>
+  <use xlink:href="#glyph0-8" x="184.203125" y="60.053277"/>
+</g>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 40.925236 10.544446 L 44.675236 10.544446 L 44.675236 12.090345 L 40.925236 12.090345 Z M 40.925236 10.544446 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 34.883439 10.536634 L 38.633439 10.536634 L 38.633439 12.120032 L 34.883439 12.120032 Z M 34.883439 10.536634 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 47.084806 10.484876 L 52.045743 10.484876 L 52.045743 12.130774 L 47.084806 12.130774 Z M 47.084806 10.484876 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 53.980118 10.376868 L 59.866642 10.376868 L 59.866642 12.279603 L 53.980118 12.279603 Z M 53.980118 10.376868 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 54.048478 13.825501 L 59.868009 13.825501 L 59.868009 15.490345 L 54.048478 15.490345 Z M 54.048478 13.825501 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 26.481876 11.338001 L 28.593009 11.332337 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 28.968009 11.33136 L 28.468595 11.582728 L 28.593009 11.332337 L 28.467228 11.082728 Z M 28.968009 11.33136 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 32.876798 11.329798 L 34.396525 11.328626 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 34.771525 11.328431 L 34.27172 11.578821 L 34.396525 11.328626 L 34.271329 11.078821 Z M 34.771525 11.328431 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 38.633439 11.328431 L 40.438517 11.319642 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 40.813517 11.317884 L 40.314689 11.570228 L 40.438517 11.319642 L 40.312345 11.070423 Z M 40.813517 11.317884 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 44.675236 11.317298 L 46.597892 11.309876 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 46.972892 11.308313 L 46.473868 11.560267 L 46.597892 11.309876 L 46.471915 11.060267 Z M 46.972892 11.308313 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 52.045743 11.307923 L 53.4934 11.323157 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 53.8684 11.327063 L 53.365861 11.57179 L 53.4934 11.323157 L 53.370939 11.07179 Z M 53.8684 11.327063 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-9" x="286.757813" y="60.611871"/>
+  <use xlink:href="#glyph0-10" x="296.757813" y="60.611871"/>
+  <use xlink:href="#glyph0-1" x="306.757813" y="60.611871"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-11" x="405.660156" y="59.904839"/>
+  <use xlink:href="#glyph0-10" x="415.660156" y="59.904839"/>
+  <use xlink:href="#glyph0-12" x="425.660156" y="59.904839"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph1-1" x="511.308594" y="58.064616"/>
+  <use xlink:href="#glyph1-2" x="517.308757" y="58.064616"/>
+  <use xlink:href="#glyph1-3" x="523.308919" y="58.064616"/>
+  <use xlink:href="#glyph1-4" x="529.309082" y="58.064616"/>
+  <use xlink:href="#glyph1-5" x="535.309245" y="58.064616"/>
+  <use xlink:href="#glyph1-6" x="541.309408" y="58.064616"/>
+  <use xlink:href="#glyph1-7" x="547.30957" y="58.064616"/>
+  <use xlink:href="#glyph1-8" x="553.309733" y="58.064616"/>
+  <use xlink:href="#glyph1-9" x="559.309896" y="58.064616"/>
+  <use xlink:href="#glyph1-10" x="565.310059" y="58.064616"/>
+  <use xlink:href="#glyph1-11" x="571.310221" y="58.064616"/>
+  <use xlink:href="#glyph1-12" x="577.310384" y="58.064616"/>
+  <use xlink:href="#glyph1-13" x="583.310547" y="58.064616"/>
+  <use xlink:href="#glyph1-8" x="589.31071" y="58.064616"/>
+  <use xlink:href="#glyph1-14" x="595.310872" y="58.064616"/>
+</g>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 45.671915 11.342298 L 45.655704 11.342298 L 45.655704 14.657923 L 53.561759 14.657923 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 53.936759 14.657923 L 53.436759 14.907923 L 53.561759 14.657923 L 53.436759 14.407923 Z M 53.936759 14.657923 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph1-15" x="657.078125" y="57.724772"/>
+  <use xlink:href="#glyph1-16" x="663.078288" y="57.724772"/>
+  <use xlink:href="#glyph1-10" x="669.078451" y="57.724772"/>
+  <use xlink:href="#glyph1-6" x="675.078613" y="57.724772"/>
+  <use xlink:href="#glyph1-8" x="681.078776" y="57.724772"/>
+  <use xlink:href="#glyph1-17" x="687.078939" y="57.724772"/>
+  <use xlink:href="#glyph1-11" x="693.079102" y="57.724772"/>
+  <use xlink:href="#glyph1-18" x="699.079264" y="57.724772"/>
+  <use xlink:href="#glyph1-19" x="705.079427" y="57.724772"/>
+  <use xlink:href="#glyph1-4" x="711.07959" y="57.724772"/>
+  <use xlink:href="#glyph1-20" x="717.079753" y="57.724772"/>
+  <use xlink:href="#glyph1-21" x="723.079915" y="57.724772"/>
+  <use xlink:href="#glyph1-22" x="729.080078" y="57.724772"/>
+  <use xlink:href="#glyph1-23" x="735.080241" y="57.724772"/>
+  <use xlink:href="#glyph1-21" x="741.080404" y="57.724772"/>
+  <use xlink:href="#glyph1-22" x="747.080566" y="57.724772"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph1-24" x="673.335938" y="124.170085"/>
+  <use xlink:href="#glyph1-11" x="679.3361" y="124.170085"/>
+  <use xlink:href="#glyph1-13" x="685.336263" y="124.170085"/>
+  <use xlink:href="#glyph1-8" x="691.336426" y="124.170085"/>
+  <use xlink:href="#glyph1-4" x="697.336589" y="124.170085"/>
+  <use xlink:href="#glyph1-20" x="703.336751" y="124.170085"/>
+  <use xlink:href="#glyph1-21" x="709.336914" y="124.170085"/>
+  <use xlink:href="#glyph1-22" x="715.337077" y="124.170085"/>
+  <use xlink:href="#glyph1-23" x="721.33724" y="124.170085"/>
+  <use xlink:href="#glyph1-21" x="727.337402" y="124.170085"/>
+  <use xlink:href="#glyph1-22" x="733.337565" y="124.170085"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph2-1" x="168.71875" y="31.959093"/>
+  <use xlink:href="#glyph2-2" x="175.866102" y="31.959093"/>
+  <use xlink:href="#glyph2-3" x="180.92551" y="31.959093"/>
+  <use xlink:href="#glyph2-4" x="188.879069" y="31.959093"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph2-5" x="288.109375" y="31.681749"/>
+  <use xlink:href="#glyph2-1" x="294.882378" y="31.681749"/>
+  <use xlink:href="#glyph2-6" x="302.029731" y="31.681749"/>
+  <use xlink:href="#glyph2-7" x="309.996039" y="31.681749"/>
+  <use xlink:href="#glyph2-8" x="313.607964" y="31.681749"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph2-5" x="535.988281" y="33.365343"/>
+  <use xlink:href="#glyph2-1" x="542.761285" y="33.365343"/>
+  <use xlink:href="#glyph2-6" x="549.908637" y="33.365343"/>
+  <use xlink:href="#glyph2-7" x="557.874946" y="33.365343"/>
+  <use xlink:href="#glyph2-8" x="561.486871" y="33.365343"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph2-9" x="26.695313" y="32.365343"/>
+  <use xlink:href="#glyph2-10" x="34.947266" y="32.365343"/>
+  <use xlink:href="#glyph2-11" x="38.559191" y="32.365343"/>
+  <use xlink:href="#glyph2-11" x="46.798394" y="32.365343"/>
+  <use xlink:href="#glyph2-10" x="55.037598" y="32.365343"/>
+  <use xlink:href="#glyph2-11" x="58.649523" y="32.365343"/>
+  <use xlink:href="#glyph2-12" x="66.888726" y="32.365343"/>
+</g>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-dasharray:0.14,0.14;stroke-miterlimit:10;" d="M 45.300431 9.486438 L 60.373478 9.486438 L 60.373478 16.175696 L 45.300431 16.175696 Z M 45.300431 9.486438 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph2-13" x="532.003906" y="11.904405"/>
+  <use xlink:href="#glyph2-14" x="542.236382" y="11.904405"/>
+  <use xlink:href="#glyph2-15" x="550.475586" y="11.904405"/>
+  <use xlink:href="#glyph2-4" x="555.5727" y="11.904405"/>
+  <use xlink:href="#glyph2-14" x="563.824653" y="11.904405"/>
+  <use xlink:href="#glyph2-15" x="572.063856" y="11.904405"/>
+  <use xlink:href="#glyph2-16" x="577.16097" y="11.904405"/>
+  <use xlink:href="#glyph2-17" x="581.293186" y="11.904405"/>
+  <use xlink:href="#glyph2-3" x="588.307346" y="11.904405"/>
+  <use xlink:href="#glyph2-2" x="596.260905" y="11.904405"/>
+  <use xlink:href="#glyph2-18" x="601.377279" y="11.904405"/>
+  <use xlink:href="#glyph2-6" x="614.040853" y="11.904405"/>
+  <use xlink:href="#glyph2-15" x="622.007161" y="11.904405"/>
+  <use xlink:href="#glyph2-15" x="627.104275" y="11.904405"/>
+  <use xlink:href="#glyph2-8" x="632.201389" y="11.904405"/>
+  <use xlink:href="#glyph2-2" x="640.199436" y="11.904405"/>
+  <use xlink:href="#glyph2-16" x="645.544217" y="11.904405"/>
+  <use xlink:href="#glyph2-19" x="649.676432" y="11.904405"/>
+  <use xlink:href="#glyph2-20" x="657.928385" y="11.904405"/>
+  <use xlink:href="#glyph2-5" x="665.621799" y="11.904405"/>
+  <use xlink:href="#glyph2-15" x="672.394803" y="11.904405"/>
+  <use xlink:href="#glyph2-8" x="677.491916" y="11.904405"/>
+  <use xlink:href="#glyph2-18" x="685.489963" y="11.904405"/>
+</g>
+</g>
+</svg>
diff --git a/Documentation/admin-guide/media/ivtv-cardlist.rst b/Documentation/admin-guide/media/ivtv-cardlist.rst
new file mode 100644
index 000000000000..c34a9ebc9ac2
--- /dev/null
+++ b/Documentation/admin-guide/media/ivtv-cardlist.rst
@@ -0,0 +1,139 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+IVTV cards list
+===============
+
+.. tabularcolumns:: |p{1.4cm}|p{12.7cm}|p{3.4cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - PCI IDs
+
+   * - 0
+     - Hauppauge WinTV PVR-250
+     - IVTV16 104d:813d
+
+   * - 1
+     - Hauppauge WinTV PVR-350
+     - IVTV16 104d:813d
+
+   * - 2
+     - Hauppauge WinTV PVR-150
+     - IVTV16 104d:813d
+
+   * - 3
+     - AVerMedia M179
+     - IVTV15 1461:a3cf, IVTV15 1461:a3ce
+
+   * - 4
+     - Yuan MPG600, Kuroutoshikou ITVC16-STVLP
+     - IVTV16 12ab:fff3, IVTV16 12ab:ffff
+
+   * - 5
+     - YUAN MPG160, Kuroutoshikou ITVC15-STVLP, I/O Data GV-M2TV/PCI
+     - IVTV15 10fc:40a0
+
+   * - 6
+     - Yuan PG600, Diamond PVR-550
+     - IVTV16 ff92:0070, IVTV16 ffab:0600
+
+   * - 7
+     - Adaptec VideOh! AVC-2410
+     - IVTV16 9005:0093
+
+   * - 8
+     - Adaptec VideOh! AVC-2010
+     - IVTV16 9005:0092
+
+   * - 9
+     - Nagase Transgear 5000TV
+     - IVTV16 1461:bfff
+
+   * - 10
+     - AOpen VA2000MAX-SNT6
+     - IVTV16 0000:ff5f
+
+   * - 11
+     - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP
+     - IVTV16 12ab:0600, IVTV16 fbab:0600, IVTV16 1154:0523
+
+   * - 12
+     - I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner)
+     - IVTV16 10fc:d01e, IVTV16 10fc:d038, IVTV16 10fc:d039
+
+   * - 13
+     - I/O Data GV-MVP/RX2E
+     - IVTV16 10fc:d025
+
+   * - 14
+     - GotView PCI DVD
+     - IVTV16 12ab:0600
+
+   * - 15
+     - GotView PCI DVD2 Deluxe
+     - IVTV16 ffac:0600
+
+   * - 16
+     - Yuan MPC622
+     - IVTV16 ff01:d998
+
+   * - 17
+     - Digital Cowboy DCT-MTVP1
+     - IVTV16 1461:bfff
+
+   * - 18
+     - Yuan PG600-2, GotView PCI DVD Lite
+     - IVTV16 ffab:0600, IVTV16 ffad:0600
+
+   * - 19
+     - Club3D ZAP-TV1x01
+     - IVTV16 ffab:0600
+
+   * - 20
+     - AVerTV MCE 116 Plus
+     - IVTV16 1461:c439
+
+   * - 21
+     - ASUS Falcon2
+     - IVTV16 1043:4b66, IVTV16 1043:462e, IVTV16 1043:4b2e
+
+   * - 22
+     - AVerMedia PVR-150 Plus / AVerTV M113 Partsnic (Daewoo) Tuner
+     - IVTV16 1461:c034, IVTV16 1461:c035
+
+   * - 23
+     - AVerMedia EZMaker PCI Deluxe
+     - IVTV16 1461:c03f
+
+   * - 24
+     - AVerMedia M104
+     - IVTV16 1461:c136
+
+   * - 25
+     - Buffalo PC-MV5L/PCI
+     - IVTV16 1154:052b
+
+   * - 26
+     - AVerMedia UltraTV 1500 MCE / AVerTV M113 Philips Tuner
+     - IVTV16 1461:c019, IVTV16 1461:c01b
+
+   * - 27
+     - Sony VAIO Giga Pocket (ENX Kikyou)
+     - IVTV16 104d:813d
+
+   * - 28
+     - Hauppauge WinTV PVR-350 (V1)
+     - IVTV16 104d:813d
+
+   * - 29
+     - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR)
+     - IVTV16 104d:813d
+
+   * - 30
+     - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR/YCS)
+     - IVTV16 104d:813d
diff --git a/Documentation/admin-guide/media/ivtv.rst b/Documentation/admin-guide/media/ivtv.rst
new file mode 100644
index 000000000000..7b8775d20214
--- /dev/null
+++ b/Documentation/admin-guide/media/ivtv.rst
@@ -0,0 +1,218 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The ivtv driver
+===============
+
+Author: Hans Verkuil <hverkuil@xs4all.nl>
+
+This is a v4l2 device driver for the Conexant cx23415/6 MPEG encoder/decoder.
+The cx23415 can do both encoding and decoding, the cx23416 can only do MPEG
+encoding. Currently the only card featuring full decoding support is the
+Hauppauge PVR-350.
+
+.. note::
+
+   #) This driver requires the latest encoder firmware (version 2.06.039, size
+      376836 bytes). Get the firmware from here:
+
+      https://linuxtv.org/downloads/firmware/#conexant
+
+   #) 'normal' TV applications do not work with this driver, you need
+      an application that can handle MPEG input such as mplayer, xine, MythTV,
+      etc.
+
+The primary goal of the IVTV project is to provide a "clean room" Linux
+Open Source driver implementation for video capture cards based on the
+iCompression iTVC15 or Conexant CX23415/CX23416 MPEG Codec.
+
+Features
+--------
+
+ * Hardware mpeg2 capture of broadcast video (and sound) via the tuner or
+   S-Video/Composite and audio line-in.
+ * Hardware mpeg2 capture of FM radio where hardware support exists
+ * Supports NTSC, PAL, SECAM with stereo sound
+ * Supports SAP and bilingual transmissions.
+ * Supports raw VBI (closed captions and teletext).
+ * Supports sliced VBI (closed captions and teletext) and is able to insert
+   this into the captured MPEG stream.
+ * Supports raw YUV and PCM input.
+
+Additional features for the PVR-350 (CX23415 based)
+---------------------------------------------------
+
+ * Provides hardware mpeg2 playback
+ * Provides comprehensive OSD (On Screen Display: ie. graphics overlaying the
+   video signal)
+ * Provides a framebuffer (allowing X applications to appear on the video
+   device)
+ * Supports raw YUV output.
+
+IMPORTANT: In case of problems first read this page:
+	https://help.ubuntu.com/community/Install_IVTV_Troubleshooting
+
+See also
+--------
+
+https://linuxtv.org
+
+IRC
+---
+
+irc://irc.freenode.net/#v4l
+
+----------------------------------------------------------
+
+Devices
+-------
+
+A maximum of 12 ivtv boards are allowed at the moment.
+
+Cards that don't have a video output capability (i.e. non PVR350 cards)
+lack the vbi8, vbi16, video16 and video48 devices. They also do not
+support the framebuffer device /dev/fbx for OSD.
+
+The radio0 device may or may not be present, depending on whether the
+card has a radio tuner or not.
+
+Here is a list of the base v4l devices:
+
+.. code-block:: none
+
+	crw-rw----    1 root     video     81,   0 Jun 19 22:22 /dev/video0
+	crw-rw----    1 root     video     81,  16 Jun 19 22:22 /dev/video16
+	crw-rw----    1 root     video     81,  24 Jun 19 22:22 /dev/video24
+	crw-rw----    1 root     video     81,  32 Jun 19 22:22 /dev/video32
+	crw-rw----    1 root     video     81,  48 Jun 19 22:22 /dev/video48
+	crw-rw----    1 root     video     81,  64 Jun 19 22:22 /dev/radio0
+	crw-rw----    1 root     video     81, 224 Jun 19 22:22 /dev/vbi0
+	crw-rw----    1 root     video     81, 228 Jun 19 22:22 /dev/vbi8
+	crw-rw----    1 root     video     81, 232 Jun 19 22:22 /dev/vbi16
+
+Base devices
+------------
+
+For every extra card you have the numbers increased by one. For example,
+/dev/video0 is listed as the 'base' encoding capture device so we have:
+
+- /dev/video0  is the encoding capture device for the first card (card 0)
+- /dev/video1  is the encoding capture device for the second card (card 1)
+- /dev/video2  is the encoding capture device for the third card (card 2)
+
+Note that if the first card doesn't have a feature (eg no decoder, so no
+video16, the second card will still use video17. The simple rule is 'add
+the card number to the base device number'. If you have other capture
+cards (e.g. WinTV PCI) that are detected first, then you have to tell
+the ivtv module about it so that it will start counting at 1 (or 2, or
+whatever). Otherwise the device numbers can get confusing. The ivtv
+'ivtv_first_minor' module option can be used for that.
+
+
+- /dev/video0
+
+  The encoding capture device(s).
+
+  Read-only.
+
+  Reading from this device gets you the MPEG1/2 program stream.
+  Example:
+
+  .. code-block:: none
+
+	cat /dev/video0 > my.mpg (you need to hit ctrl-c to exit)
+
+
+- /dev/video16
+
+  The decoder output device(s)
+
+  Write-only. Only present if the MPEG decoder (i.e. CX23415) exists.
+
+  An mpeg2 stream sent to this device will appear on the selected video
+  display, audio will appear on the line-out/audio out.  It is only
+  available for cards that support video out. Example:
+
+  .. code-block:: none
+
+	cat my.mpg >/dev/video16
+
+
+- /dev/video24
+
+  The raw audio capture device(s).
+
+  Read-only
+
+  The raw audio PCM stereo stream from the currently selected
+  tuner or audio line-in.  Reading from this device results in a raw
+  (signed 16 bit Little Endian, 48000 Hz, stereo pcm) capture.
+  This device only captures audio. This should be replaced by an ALSA
+  device in the future.
+  Note that there is no corresponding raw audio output device, this is
+  not supported in the decoder firmware.
+
+
+- /dev/video32
+
+  The raw video capture device(s)
+
+  Read-only
+
+  The raw YUV video output from the current video input. The YUV format
+  is non-standard (V4L2_PIX_FMT_HM12).
+
+  Note that the YUV and PCM streams are not synchronized, so they are of
+  limited use.
+
+
+- /dev/video48
+
+  The raw video display device(s)
+
+  Write-only. Only present if the MPEG decoder (i.e. CX23415) exists.
+
+  Writes a YUV stream to the decoder of the card.
+
+
+- /dev/radio0
+
+  The radio tuner device(s)
+
+  Cannot be read or written.
+
+  Used to enable the radio tuner and tune to a frequency. You cannot
+  read or write audio streams with this device.  Once you use this
+  device to tune the radio, use /dev/video24 to read the raw pcm stream
+  or /dev/video0 to get an mpeg2 stream with black video.
+
+
+- /dev/vbi0
+
+  The 'vertical blank interval' (Teletext, CC, WSS etc) capture device(s)
+
+  Read-only
+
+  Captures the raw (or sliced) video data sent during the Vertical Blank
+  Interval. This data is used to encode teletext, closed captions, VPS,
+  widescreen signalling, electronic program guide information, and other
+  services.
+
+
+- /dev/vbi8
+
+  Processed vbi feedback device(s)
+
+  Read-only. Only present if the MPEG decoder (i.e. CX23415) exists.
+
+  The sliced VBI data embedded in an MPEG stream is reproduced on this
+  device. So while playing back a recording on /dev/video16, you can
+  read the embedded VBI data from /dev/vbi8.
+
+
+- /dev/vbi16
+
+  The vbi 'display' device(s)
+
+  Write-only. Only present if the MPEG decoder (i.e. CX23415) exists.
+
+  Can be used to send sliced VBI data to the video-out connector.
diff --git a/Documentation/admin-guide/media/lmedm04.rst b/Documentation/admin-guide/media/lmedm04.rst
new file mode 100644
index 000000000000..a6ee33413748
--- /dev/null
+++ b/Documentation/admin-guide/media/lmedm04.rst
@@ -0,0 +1,107 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Firmware files for lmedm04 cards
+================================
+
+To extract firmware for the DM04/QQBOX you need to copy the
+following file(s) to this directory.
+
+For DM04+/QQBOX LME2510C (Sharp 7395 Tuner)
+-------------------------------------------
+
+The Sharp 7395 driver can be found in windows/system32/drivers
+
+US2A0D.sys (dated 17 Mar 2009)
+
+
+and run:
+
+.. code-block:: none
+
+	scripts/get_dvb_firmware lme2510c_s7395
+
+will produce dvb-usb-lme2510c-s7395.fw
+
+An alternative but older firmware can be found on the driver
+disk DVB-S_EN_3.5A in BDADriver/driver
+
+LMEBDA_DVBS7395C.sys (dated 18 Jan 2008)
+
+and run:
+
+.. code-block:: none
+
+	./get_dvb_firmware lme2510c_s7395_old
+
+will produce dvb-usb-lme2510c-s7395.fw
+
+The LG firmware can be found on the driver
+disk DM04+_5.1A[LG] in BDADriver/driver
+
+For DM04 LME2510 (LG Tuner)
+---------------------------
+
+LMEBDA_DVBS.sys (dated 13 Nov 2007)
+
+and run:
+
+
+.. code-block:: none
+
+	./get_dvb_firmware lme2510_lg
+
+will produce dvb-usb-lme2510-lg.fw
+
+
+Other LG firmware can be extracted manually from US280D.sys
+only found in windows/system32/drivers
+
+dd if=US280D.sys ibs=1 skip=42360 count=3924 of=dvb-usb-lme2510-lg.fw
+
+For DM04 LME2510C (LG Tuner)
+----------------------------
+
+.. code-block:: none
+
+	dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw
+
+
+The Sharp 0194 tuner driver can be found in windows/system32/drivers
+
+US290D.sys (dated 09 Apr 2009)
+
+For LME2510
+-----------
+
+.. code-block:: none
+
+	dd if=US290D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-s0194.fw
+
+
+For LME2510C
+------------
+
+
+.. code-block:: none
+
+	dd if=US290D.sys ibs=1 skip=33152 count=3697 of=dvb-usb-lme2510c-s0194.fw
+
+
+The m88rs2000 tuner driver can be found in windows/system32/drivers
+
+US2B0D.sys (dated 29 Jun 2010)
+
+
+.. code-block:: none
+
+	dd if=US2B0D.sys ibs=1 skip=34432 count=3871 of=dvb-usb-lme2510c-rs2000.fw
+
+We need to modify id of rs2000 firmware or it will warm boot id 3344:1120.
+
+
+.. code-block:: none
+
+
+	echo -ne \\xF0\\x22 | dd conv=notrunc bs=1 count=2 seek=266 of=dvb-usb-lme2510c-rs2000.fw
+
+Copy the firmware file(s) to /lib/firmware
diff --git a/Documentation/admin-guide/media/meye.rst b/Documentation/admin-guide/media/meye.rst
new file mode 100644
index 000000000000..9098a1e65f8b
--- /dev/null
+++ b/Documentation/admin-guide/media/meye.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+Vaio Picturebook Motion Eye Camera Driver
+=========================================
+
+Copyright |copy| 2001-2004 Stelian Pop <stelian@popies.net>
+
+Copyright |copy| 2001-2002 Alcôve <www.alcove.com>
+
+Copyright |copy| 2000 Andrew Tridgell <tridge@samba.org>
+
+This driver enable the use of video4linux compatible applications with the
+Motion Eye camera. This driver requires the "Sony Laptop Extras" driver (which
+can be found in the "Misc devices" section of the kernel configuration utility)
+to be compiled and installed (using its "camera=1" parameter).
+
+It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480.
+
+Grabbing is supported in packed YUV colorspace only.
+
+MJPEG hardware grabbing is supported via a private API (see below).
+
+Hardware supported
+------------------
+
+This driver supports the 'second' version of the MotionEye camera :)
+
+The first version was connected directly on the video bus of the Neomagic
+video card and is unsupported.
+
+The second one, made by Kawasaki Steel is fully supported by this
+driver (PCI vendor/device is 0x136b/0xff01)
+
+The third one, present in recent (more or less last year) Picturebooks
+(C1M* models), is not supported. The manufacturer has given the specs
+to the developers under a NDA (which allows the development of a GPL
+driver however), but things are not moving very fast (see
+http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011).
+
+There is a forth model connected on the USB bus in TR1* Vaio laptops.
+This camera is not supported at all by the current driver, in fact
+little information if any is available for this camera
+(USB vendor/device is 0x054c/0x0107).
+
+Driver options
+--------------
+
+Several options can be passed to the meye driver using the standard
+module argument syntax (<param>=<value> when passing the option to the
+module or meye.<param>=<value> on the kernel boot line when meye is
+statically linked into the kernel). Those options are:
+
+.. code-block:: none
+
+	gbuffers:	number of capture buffers, default is 2 (32 max)
+
+	gbufsize:	size of each capture buffer, default is 614400
+
+	video_nr:	video device to register (0 = /dev/video0, etc)
+
+Module use
+----------
+
+In order to automatically load the meye module on use, you can put those lines
+in your /etc/modprobe.d/meye.conf file:
+
+.. code-block:: none
+
+	alias char-major-81 videodev
+	alias char-major-81-0 meye
+	options meye gbuffers=32
+
+Usage:
+------
+
+.. code-block:: none
+
+	xawtv >= 3.49 (<http://bytesex.org/xawtv/>)
+		for display and uncompressed video capture:
+
+			xawtv -c /dev/video0 -geometry 640x480
+				or
+			xawtv -c /dev/video0 -geometry 320x240
+
+	motioneye (<http://popies.net/meye/>)
+		for getting ppm or jpg snapshots, mjpeg video
+
+Bugs / Todo
+-----------
+
+- 'motioneye' still uses the meye private v4l1 API extensions.
diff --git a/Documentation/admin-guide/media/omap3isp.rst b/Documentation/admin-guide/media/omap3isp.rst
new file mode 100644
index 000000000000..bc447bbec7ce
--- /dev/null
+++ b/Documentation/admin-guide/media/omap3isp.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+OMAP 3 Image Signal Processor (ISP) driver
+==========================================
+
+Copyright |copy| 2010 Nokia Corporation
+
+Copyright |copy| 2009 Texas Instruments, Inc.
+
+Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
+Sakari Ailus <sakari.ailus@iki.fi>, David Cohen <dacohen@gmail.com>
+
+
+Introduction
+------------
+
+This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP)
+driver located under drivers/media/platform/omap3isp. The original driver was
+written by Texas Instruments but since that it has been rewritten (twice) at
+Nokia.
+
+The driver has been successfully used on the following versions of OMAP 3:
+
+- 3430
+- 3530
+- 3630
+
+The driver implements V4L2, Media controller and v4l2_subdev interfaces.
+Sensor, lens and flash drivers using the v4l2_subdev interface in the kernel
+are supported.
+
+
+Split to subdevs
+----------------
+
+The OMAP 3 ISP is split into V4L2 subdevs, each of the blocks inside the ISP
+having one subdev to represent it. Each of the subdevs provide a V4L2 subdev
+interface to userspace.
+
+- OMAP3 ISP CCP2
+- OMAP3 ISP CSI2a
+- OMAP3 ISP CCDC
+- OMAP3 ISP preview
+- OMAP3 ISP resizer
+- OMAP3 ISP AEWB
+- OMAP3 ISP AF
+- OMAP3 ISP histogram
+
+Each possible link in the ISP is modelled by a link in the Media controller
+interface. For an example program see [#]_.
+
+
+Controlling the OMAP 3 ISP
+--------------------------
+
+In general, the settings given to the OMAP 3 ISP take effect at the beginning
+of the following frame. This is done when the module becomes idle during the
+vertical blanking period on the sensor. In memory-to-memory operation the pipe
+is run one frame at a time. Applying the settings is done between the frames.
+
+All the blocks in the ISP, excluding the CSI-2 and possibly the CCP2 receiver,
+insist on receiving complete frames. Sensors must thus never send the ISP
+partial frames.
+
+Autoidle does have issues with some ISP blocks on the 3430, at least.
+Autoidle is only enabled on 3630 when the omap3isp module parameter autoidle
+is non-zero.
+
+Technical reference manuals (TRMs) and other documentation
+----------------------------------------------------------
+
+OMAP 3430 TRM:
+<URL:http://focus.ti.com/pdfs/wtbu/OMAP34xx_ES3.1.x_PUBLIC_TRM_vZM.zip>
+Referenced 2011-03-05.
+
+OMAP 35xx TRM:
+<URL:http://www.ti.com/litv/pdf/spruf98o> Referenced 2011-03-05.
+
+OMAP 3630 TRM:
+<URL:http://focus.ti.com/pdfs/wtbu/OMAP36xx_ES1.x_PUBLIC_TRM_vQ.zip>
+Referenced 2011-03-05.
+
+DM 3730 TRM:
+<URL:http://www.ti.com/litv/pdf/sprugn4h> Referenced 2011-03-06.
+
+
+References
+----------
+
+.. [#] http://git.ideasonboard.org/?p=media-ctl.git;a=summary
diff --git a/Documentation/admin-guide/media/omap4_camera.rst b/Documentation/admin-guide/media/omap4_camera.rst
new file mode 100644
index 000000000000..24db4222d36d
--- /dev/null
+++ b/Documentation/admin-guide/media/omap4_camera.rst
@@ -0,0 +1,62 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+OMAP4 ISS Driver
+================
+
+Author: Sergio Aguirre <sergio.a.aguirre@gmail.com>
+
+Copyright (C) 2012, Texas Instruments
+
+Introduction
+------------
+
+The OMAP44XX family of chips contains the Imaging SubSystem (a.k.a. ISS),
+Which contains several components that can be categorized in 3 big groups:
+
+- Interfaces (2 Interfaces: CSI2-A & CSI2-B/CCP2)
+- ISP (Image Signal Processor)
+- SIMCOP (Still Image Coprocessor)
+
+For more information, please look in [#f1]_ for latest version of:
+"OMAP4430 Multimedia Device Silicon Revision 2.x"
+
+As of Revision AB, the ISS is described in detail in section 8.
+
+This driver is supporting **only** the CSI2-A/B interfaces for now.
+
+It makes use of the Media Controller framework [#f2]_, and inherited most of the
+code from OMAP3 ISP driver (found under drivers/media/platform/omap3isp/\*),
+except that it doesn't need an IOMMU now for ISS buffers memory mapping.
+
+Supports usage of MMAP buffers only (for now).
+
+Tested platforms
+----------------
+
+- OMAP4430SDP, w/ ES2.1 GP & SEVM4430-CAM-V1-0 (Contains IMX060 & OV5640, in
+  which only the last one is supported, outputting YUV422 frames).
+
+- TI Blaze MDP, w/ OMAP4430 ES2.2 EMU (Contains 1 IMX060 & 2 OV5650 sensors, in
+  which only the OV5650 are supported, outputting RAW10 frames).
+
+- PandaBoard, Rev. A2, w/ OMAP4430 ES2.1 GP & OV adapter board, tested with
+  following sensors:
+  * OV5640
+  * OV5650
+
+- Tested on mainline kernel:
+
+	http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=summary
+
+  Tag: v3.3 (commit c16fa4f2ad19908a47c63d8fa436a1178438c7e7)
+
+File list
+---------
+drivers/staging/media/omap4iss/
+include/linux/platform_data/media/omap4iss.h
+
+References
+----------
+
+.. [#f1] http://focus.ti.com/general/docs/wtbu/wtbudocumentcenter.tsp?navigationId=12037&templateId=6123#62
+.. [#f2] http://lwn.net/Articles/420485/
diff --git a/Documentation/admin-guide/media/opera-firmware.rst b/Documentation/admin-guide/media/opera-firmware.rst
new file mode 100644
index 000000000000..fab3581551de
--- /dev/null
+++ b/Documentation/admin-guide/media/opera-firmware.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Opera firmware
+==============
+
+Author: Marco Gittler <g.marco@freenet.de>
+
+To extract the firmware for the Opera DVB-S1 USB-Box
+you need to copy the files:
+
+2830SCap2.sys
+2830SLoad2.sys
+
+from the windriver disk into this directory.
+
+Then run:
+
+.. code-block:: none
+
+	scripts/get_dvb_firmware opera1
+
+and after that you have 2 files:
+
+dvb-usb-opera-01.fw
+dvb-usb-opera1-fpga-01.fw
+
+in here.
+
+Copy them into /lib/firmware/ .
+
+After that the driver can load the firmware
+(if you have enabled firmware loading
+in kernel config and have hotplug running).
diff --git a/Documentation/admin-guide/media/other-usb-cardlist.rst b/Documentation/admin-guide/media/other-usb-cardlist.rst
new file mode 100644
index 000000000000..bbfdb1389c18
--- /dev/null
+++ b/Documentation/admin-guide/media/other-usb-cardlist.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Other USB cards list
+====================
+
+================  ======================================  =====================
+Driver            Card name                               USB IDs
+================  ======================================  =====================
+airspy		  Airspy				  1d50:60a1
+dvb-as102	  Abilis Systems DVB-Titan		  1BA6:0001
+dvb-as102	  PCTV Systems picoStick (74e)		  2013:0246
+dvb-as102	  Elgato EyeTV DTT Deluxe		  0fd9:002c
+dvb-as102	  nBox DVB-T Dongle			  0b89:0007
+dvb-as102	  Sky IT Digital Key (green led)	  2137:0001
+b2c2-flexcop-usb  Technisat/B2C2 FlexCop II/IIb/III	  0af7:0101
+		  Digital TV
+cpia2		  Vision's CPiA2 cameras		  0553:0100, 0553:0140,
+		  such as the Digital Blue QX5		  0553:0151
+go7007		  WIS GO7007 MPEG encoder		  1943:a250, 093b:a002,
+							  093b:a004, 0eb1:6666,
+							  0eb1:6668
+hackrf		  HackRF Software Decoder Radio		  1d50:6089
+hdpvr		  Hauppauge HD PVR			  2040:4900, 2040:4901,
+							  2040:4902, 2040:4982,
+							  2040:4903
+msi2500		  Mirics MSi3101 SDR Dongle		  1df7:2500, 2040:d300
+pvrusb2		  Hauppauge WinTV-PVR USB2		  2040:2900, 2040:2950,
+							  2040:2400, 1164:0622,
+							  1164:0602, 11ba:1003,
+							  11ba:1001, 2040:7300,
+							  2040:7500, 2040:7501,
+							  0ccd:0039, 2040:7502,
+							  2040:7510
+pwc		  Creative Webcam 5			  041E:400C
+pwc		  Creative Webcam Pro Ex		  041E:4011
+pwc		  Logitech QuickCam 3000 Pro		  046D:08B0
+pwc		  Logitech QuickCam Notebook Pro	  046D:08B1
+pwc		  Logitech QuickCam 4000 Pro		  046D:08B2
+pwc		  Logitech QuickCam Zoom (old model)	  046D:08B3
+pwc		  Logitech QuickCam Zoom (new model)	  046D:08B4
+pwc		  Logitech QuickCam Orbit/Sphere	  046D:08B5
+pwc		  Logitech/Cisco VT Camera		  046D:08B6
+pwc		  Logitech ViewPort AV 100		  046D:08B7
+pwc		  Logitech QuickCam			  046D:08B8
+pwc		  Philips PCA645VC			  0471:0302
+pwc		  Philips PCA646VC			  0471:0303
+pwc		  Askey VC010 type 2			  0471:0304
+pwc		  Philips PCVC675K (Vesta)		  0471:0307
+pwc		  Philips PCVC680K (Vesta Pro)		  0471:0308
+pwc		  Philips PCVC690K (Vesta Pro Scan)	  0471:030C
+pwc		  Philips PCVC730K (ToUCam Fun),	  0471:0310
+		  PCVC830 (ToUCam II)
+pwc		  Philips PCVC740K (ToUCam Pro),	  0471:0311
+		  PCVC840 (ToUCam II)
+pwc		  Philips PCVC750K (ToUCam Pro Scan)	  0471:0312
+pwc		  Philips PCVC720K/40 (ToUCam XS)	  0471:0313
+pwc		  Philips SPC 900NC			  0471:0329
+pwc		  Philips SPC 880NC			  0471:032C
+pwc		  Sotec Afina Eye			  04CC:8116
+pwc		  Samsung MPC-C10			  055D:9000
+pwc		  Samsung MPC-C30			  055D:9001
+pwc		  Samsung SNC-35E (Ver3.0)		  055D:9002
+pwc		  Askey VC010 type 1			  069A:0001
+pwc		  AME Co. Afina Eye			  06BE:8116
+pwc		  Visionite VCS-UC300			  0d81:1900
+pwc		  Visionite VCS-UM100			  0d81:1910
+s2255drv	  Sensoray 2255				  1943:2255, 1943:2257
+stk1160		  STK1160 USB video capture dongle	  05e1:0408
+stkwebcam	  Syntek DC1125				  174f:a311, 05e1:0501
+dvb-ttusb-budget  Technotrend/Hauppauge Nova-USB devices  0b48:1003, 0b48:1004,
+							  0b48:1005
+dvb-ttusb_dec	  Technotrend/Hauppauge MPEG decoder	  0b48:1006
+		  DEC3000-s
+dvb-ttusb_dec	  Technotrend/Hauppauge MPEG decoder	  0b48:1007
+dvb-ttusb_dec	  Technotrend/Hauppauge MPEG decoder	  0b48:1008
+		  DEC2000-t
+dvb-ttusb_dec	  Technotrend/Hauppauge MPEG decoder
+		  DEC2540-t				  0b48:1009
+usbtv		  Fushicai USBTV007 Audio-Video Grabber	  1b71:3002, 1f71:3301,
+							  1f71:3306
+zr364xx		  USB ZR364XX Camera			  08ca:0109, 041e:4024,
+							  0d64:0108, 0546:3187,
+							  0d64:3108, 0595:4343,
+							  0bb0:500d, 0feb:2004,
+							  055f:b500, 08ca:2062,
+							  052b:1a18, 04c8:0729,
+							  04f2:a208, 0784:0040,
+							  06d6:0034, 0a17:0062,
+							  06d6:003b, 0a17:004e,
+							  041e:405d, 08ca:2102,
+							  06d6:003d
+================  ======================================  =====================
diff --git a/Documentation/admin-guide/media/philips.rst b/Documentation/admin-guide/media/philips.rst
new file mode 100644
index 000000000000..e2840be10d08
--- /dev/null
+++ b/Documentation/admin-guide/media/philips.rst
@@ -0,0 +1,247 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Philips webcams (pwc driver)
+============================
+
+This file contains some additional information for the Philips and OEM webcams.
+E-mail: webcam@smcc.demon.nl                        Last updated: 2004-01-19
+Site: http://www.smcc.demon.nl/webcam/
+
+As of this moment, the following cameras are supported:
+
+ * Philips PCA645
+ * Philips PCA646
+ * Philips PCVC675
+ * Philips PCVC680
+ * Philips PCVC690
+ * Philips PCVC720/40
+ * Philips PCVC730
+ * Philips PCVC740
+ * Philips PCVC750
+ * Askey VC010
+ * Creative Labs Webcam 5
+ * Creative Labs Webcam Pro Ex
+ * Logitech QuickCam 3000 Pro
+ * Logitech QuickCam 4000 Pro
+ * Logitech QuickCam Notebook Pro
+ * Logitech QuickCam Zoom
+ * Logitech QuickCam Orbit
+ * Logitech QuickCam Sphere
+ * Samsung MPC-C10
+ * Samsung MPC-C30
+ * Sotec Afina Eye
+ * AME CU-001
+ * Visionite VCS-UM100
+ * Visionite VCS-UC300
+
+The main webpage for the Philips driver is at the address above. It contains
+a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin
+contains decompression routines that allow you to use higher image sizes and
+framerates; in addition the webcam uses less bandwidth on the USB bus (handy
+if you want to run more than 1 camera simultaneously). These routines fall
+under a NDA, and may therefore not be distributed as source; however, its use
+is completely optional.
+
+You can build this code either into your kernel, or as a module. I recommend
+the latter, since it makes troubleshooting a lot easier. The built-in
+microphone is supported through the USB Audio class.
+
+When you load the module you can set some default settings for the
+camera; some programs depend on a particular image-size or -format and
+don't know how to set it properly in the driver. The options are:
+
+size
+   Can be one of 'sqcif', 'qsif', 'qcif', 'sif', 'cif' or
+   'vga', for an image size of resp. 128x96, 160x120, 176x144,
+   320x240, 352x288 and 640x480 (of course, only for those cameras that
+   support these resolutions).
+
+fps
+   Specifies the desired framerate. Is an integer in the range of 4-30.
+
+fbufs
+   This parameter specifies the number of internal buffers to use for storing
+   frames from the cam. This will help if the process that reads images from
+   the cam is a bit slow or momentarily busy. However, on slow machines it
+   only introduces lag, so choose carefully. The default is 3, which is
+   reasonable. You can set it between 2 and 5.
+
+mbufs
+   This is an integer between 1 and 10. It will tell the module the number of
+   buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends.
+   The default is 2, which is adequate for most applications (double
+   buffering).
+
+   Should you experience a lot of 'Dumping frame...' messages during
+   grabbing with a tool that uses mmap(), you might want to increase if.
+   However, it doesn't really buffer images, it just gives you a bit more
+   slack when your program is behind. But you need a multi-threaded or
+   forked program to really take advantage of these buffers.
+
+   The absolute maximum is 10, but don't set it too high!  Every buffer takes
+   up 460 KB of RAM, so unless you have a lot of memory setting this to
+   something more than 4 is an absolute waste.  This memory is only
+   allocated during open(), so nothing is wasted when the camera is not in
+   use.
+
+power_save
+   When power_save is enabled (set to 1), the module will try to shut down
+   the cam on close() and re-activate on open(). This will save power and
+   turn off the LED. Not all cameras support this though (the 645 and 646
+   don't have power saving at all), and some models don't work either (they
+   will shut down, but never wake up). Consider this experimental. By
+   default this option is disabled.
+
+compression (only useful with the plugin)
+   With this option you can control the compression factor that the camera
+   uses to squeeze the image through the USB bus. You can set the
+   parameter between 0 and 3::
+
+     0 = prefer uncompressed images; if the requested mode is not available
+	 in an uncompressed format, the driver will silently switch to low
+	 compression.
+     1 = low compression.
+     2 = medium compression.
+     3 = high compression.
+
+   High compression takes less bandwidth of course, but it could also
+   introduce some unwanted artefacts. The default is 2, medium compression.
+   See the FAQ on the website for an overview of which modes require
+   compression.
+
+   The compression parameter does not apply to the 645 and 646 cameras
+   and OEM models derived from those (only a few). Most cams honour this
+   parameter.
+
+leds
+   This settings takes 2 integers, that define the on/off time for the LED
+   (in milliseconds). One of the interesting things that you can do with
+   this is let the LED blink while the camera is in use. This::
+
+     leds=500,500
+
+   will blink the LED once every second. But with::
+
+     leds=0,0
+
+   the LED never goes on, making it suitable for silent surveillance.
+
+   By default the camera's LED is on solid while in use, and turned off
+   when the camera is not used anymore.
+
+   This parameter works only with the ToUCam range of cameras (720, 730, 740,
+   750) and OEMs. For other cameras this command is silently ignored, and
+   the LED cannot be controlled.
+
+   Finally: this parameters does not take effect UNTIL the first time you
+   open the camera device. Until then, the LED remains on.
+
+dev_hint
+   A long standing problem with USB devices is their dynamic nature: you
+   never know what device a camera gets assigned; it depends on module load
+   order, the hub configuration, the order in which devices are plugged in,
+   and the phase of the moon (i.e. it can be random). With this option you
+   can give the driver a hint as to what video device node (/dev/videoX) it
+   should use with a specific camera. This is also handy if you have two
+   cameras of the same model.
+
+   A camera is specified by its type (the number from the camera model,
+   like PCA645, PCVC750VC, etc) and optionally the serial number (visible
+   in /sys/kernel/debug/usb/devices). A hint consists of a string with the
+   following format::
+
+      [type[.serialnumber]:]node
+
+   The square brackets mean that both the type and the serialnumber are
+   optional, but a serialnumber cannot be specified without a type (which
+   would be rather pointless). The serialnumber is separated from the type
+   by a '.'; the node number by a ':'.
+
+   This somewhat cryptic syntax is best explained by a few examples::
+
+     dev_hint=3,5              The first detected cam gets assigned
+			       /dev/video3, the second /dev/video5. Any
+			       other cameras will get the first free
+			       available slot (see below).
+
+     dev_hint=645:1,680:2      The PCA645 camera will get /dev/video1,
+			       and a PCVC680 /dev/video2.
+
+     dev_hint=645.0123:3,645.4567:0	The PCA645 camera with serialnumber
+					0123 goes to /dev/video3, the same
+					camera model with the 4567 serial
+					gets /dev/video0.
+
+     dev_hint=750:1,4,5,6       The PCVC750 camera will get /dev/video1, the
+				next 3 Philips cams will use /dev/video4
+				through /dev/video6.
+
+   Some points worth knowing:
+
+   - Serialnumbers are case sensitive and must be written full, including
+     leading zeroes (it's treated as a string).
+   - If a device node is already occupied, registration will fail and
+     the webcam is not available.
+   - You can have up to 64 video devices; be sure to make enough device
+     nodes in /dev if you want to spread the numbers.
+     After /dev/video9 comes /dev/video10 (not /dev/videoA).
+   - If a camera does not match any dev_hint, it will simply get assigned
+     the first available device node, just as it used to be.
+
+trace
+   In order to better detect problems, it is now possible to turn on a
+   'trace' of some of the calls the module makes; it logs all items in your
+   kernel log at debug level.
+
+   The trace variable is a bitmask; each bit represents a certain feature.
+   If you want to trace something, look up the bit value(s) in the table
+   below, add the values together and supply that to the trace variable.
+
+   ====== ======= ================================================ =======
+   Value  Value   Description					   Default
+   (dec)  (hex)
+   ====== ======= ================================================ =======
+       1    0x1   Module initialization; this will log messages       On
+		  while loading and unloading the module
+
+       2    0x2   probe() and disconnect() traces                     On
+
+       4    0x4   Trace open() and close() calls                      Off
+
+       8    0x8   read(), mmap() and associated ioctl() calls         Off
+
+      16   0x10   Memory allocation of buffers, etc.                  Off
+
+      32   0x20   Showing underflow, overflow and Dumping frame       On
+		  messages
+
+      64   0x40   Show viewport and image sizes                       Off
+
+     128   0x80   PWCX debugging                                      Off
+   ====== ======= ================================================ =======
+
+   For example, to trace the open() & read() functions, sum 8 + 4 = 12,
+   so you would supply trace=12 during insmod or modprobe. If
+   you want to turn the initialization and probing tracing off, set trace=0.
+   The default value for trace is 35 (0x23).
+
+
+
+Example::
+
+     # modprobe pwc size=cif fps=15 power_save=1
+
+The fbufs, mbufs and trace parameters are global and apply to all connected
+cameras. Each camera has its own set of buffers.
+
+size and fps only specify defaults when you open() the device; this is to
+accommodate some tools that don't set the size. You can change these
+settings after open() with the Video4Linux ioctl() calls. The default of
+defaults is QCIF size at 10 fps.
+
+The compression parameter is semiglobal; it sets the initial compression
+preference for all camera's, but this parameter can be set per camera with
+the VIDIOCPWCSCQUAL ioctl() call.
+
+All parameters are optional.
+
diff --git a/Documentation/admin-guide/media/pulse8-cec.rst b/Documentation/admin-guide/media/pulse8-cec.rst
new file mode 100644
index 000000000000..356d08b519f3
--- /dev/null
+++ b/Documentation/admin-guide/media/pulse8-cec.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Pulse-Eight CEC Adapter driver
+==============================
+
+The pulse8-cec driver implements the following module option:
+
+``persistent_config``
+---------------------
+
+By default this is off, but when set to 1 the driver will store the current
+settings to the device's internal eeprom and restore it the next time the
+device is connected to the USB port.
diff --git a/Documentation/admin-guide/media/qcom_camss.rst b/Documentation/admin-guide/media/qcom_camss.rst
new file mode 100644
index 000000000000..a72e17d09cb7
--- /dev/null
+++ b/Documentation/admin-guide/media/qcom_camss.rst
@@ -0,0 +1,185 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+Qualcomm Camera Subsystem driver
+================================
+
+Introduction
+------------
+
+This file documents the Qualcomm Camera Subsystem driver located under
+drivers/media/platform/qcom/camss.
+
+The current version of the driver supports the Camera Subsystem found on
+Qualcomm MSM8916/APQ8016 and MSM8996/APQ8096 processors.
+
+The driver implements V4L2, Media controller and V4L2 subdev interfaces.
+Camera sensor using V4L2 subdev interface in the kernel is supported.
+
+The driver is implemented using as a reference the Qualcomm Camera Subsystem
+driver for Android as found in Code Aurora [#f1]_ [#f2]_.
+
+
+Qualcomm Camera Subsystem hardware
+----------------------------------
+
+The Camera Subsystem hardware found on 8x16 / 8x96 processors and supported by
+the driver consists of:
+
+- 2 / 3 CSIPHY modules. They handle the Physical layer of the CSI2 receivers.
+  A separate camera sensor can be connected to each of the CSIPHY module;
+- 2 / 4 CSID (CSI Decoder) modules. They handle the Protocol and Application
+  layer of the CSI2 receivers. A CSID can decode data stream from any of the
+  CSIPHY. Each CSID also contains a TG (Test Generator) block which can generate
+  artificial input data for test purposes;
+- ISPIF (ISP Interface) module. Handles the routing of the data streams from
+  the CSIDs to the inputs of the VFE;
+- 1 / 2 VFE (Video Front End) module(s). Contain a pipeline of image processing
+  hardware blocks. The VFE has different input interfaces. The PIX (Pixel) input
+  interface feeds the input data to the image processing pipeline. The image
+  processing pipeline contains also a scale and crop module at the end. Three
+  RDI (Raw Dump Interface) input interfaces bypass the image processing
+  pipeline. The VFE also contains the AXI bus interface which writes the output
+  data to memory.
+
+
+Supported functionality
+-----------------------
+
+The current version of the driver supports:
+
+- Input from camera sensor via CSIPHY;
+- Generation of test input data by the TG in CSID;
+- RDI interface of VFE
+
+  - Raw dump of the input data to memory.
+
+    Supported formats:
+
+    - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV /
+      V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY);
+    - MIPI RAW8 (8bit Bayer RAW - V4L2_PIX_FMT_SRGGB8 /
+      V4L2_PIX_FMT_SGRBG8 / V4L2_PIX_FMT_SGBRG8 / V4L2_PIX_FMT_SBGGR8);
+    - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P /
+      V4L2_PIX_FMT_SGBRG10P / V4L2_PIX_FMT_SGRBG10P / V4L2_PIX_FMT_SRGGB10P /
+      V4L2_PIX_FMT_Y10P);
+    - MIPI RAW12 (12bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB12P /
+      V4L2_PIX_FMT_SGBRG12P / V4L2_PIX_FMT_SGRBG12P / V4L2_PIX_FMT_SRGGB12P).
+    - (8x96 only) MIPI RAW14 (14bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB14P /
+      V4L2_PIX_FMT_SGBRG14P / V4L2_PIX_FMT_SGRBG14P / V4L2_PIX_FMT_SRGGB14P).
+
+  - (8x96 only) Format conversion of the input data.
+
+    Supported input formats:
+
+    - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P / V4L2_PIX_FMT_Y10P).
+
+    Supported output formats:
+
+    - Plain16 RAW10 (10bit unpacked Bayer RAW - V4L2_PIX_FMT_SBGGR10 / V4L2_PIX_FMT_Y10).
+
+- PIX interface of VFE
+
+  - Format conversion of the input data.
+
+    Supported input formats:
+
+    - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV /
+      V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY).
+
+    Supported output formats:
+
+    - NV12/NV21 (two plane YUV 4:2:0 - V4L2_PIX_FMT_NV12 / V4L2_PIX_FMT_NV21);
+    - NV16/NV61 (two plane YUV 4:2:2 - V4L2_PIX_FMT_NV16 / V4L2_PIX_FMT_NV61).
+    - (8x96 only) YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV /
+      V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY).
+
+  - Scaling support. Configuration of the VFE Encoder Scale module
+    for downscalling with ratio up to 16x.
+
+  - Cropping support. Configuration of the VFE Encoder Crop module.
+
+- Concurrent and independent usage of two (8x96: three) data inputs -
+  could be camera sensors and/or TG.
+
+
+Driver Architecture and Design
+------------------------------
+
+The driver implements the V4L2 subdev interface. With the goal to model the
+hardware links between the modules and to expose a clean, logical and usable
+interface, the driver is split into V4L2 sub-devices as follows (8x16 / 8x96):
+
+- 2 / 3 CSIPHY sub-devices - each CSIPHY is represented by a single sub-device;
+- 2 / 4 CSID sub-devices - each CSID is represented by a single sub-device;
+- 2 / 4 ISPIF sub-devices - ISPIF is represented by a number of sub-devices
+  equal to the number of CSID sub-devices;
+- 4 / 8 VFE sub-devices - VFE is represented by a number of sub-devices equal to
+  the number of the input interfaces (3 RDI and 1 PIX for each VFE).
+
+The considerations to split the driver in this particular way are as follows:
+
+- representing CSIPHY and CSID modules by a separate sub-device for each module
+  allows to model the hardware links between these modules;
+- representing VFE by a separate sub-devices for each input interface allows
+  to use the input interfaces concurrently and independently as this is
+  supported by the hardware;
+- representing ISPIF by a number of sub-devices equal to the number of CSID
+  sub-devices allows to create linear media controller pipelines when using two
+  cameras simultaneously. This avoids branches in the pipelines which otherwise
+  will require a) userspace and b) media framework (e.g. power on/off
+  operations) to  make assumptions about the data flow from a sink pad to a
+  source pad on a single media entity.
+
+Each VFE sub-device is linked to a separate video device node.
+
+The media controller pipeline graph is as follows (with connected two / three
+OV5645 camera sensors):
+
+.. _qcom_camss_graph:
+
+.. kernel-figure:: qcom_camss_graph.dot
+    :alt:   qcom_camss_graph.dot
+    :align: center
+
+    Media pipeline graph 8x16
+
+.. kernel-figure:: qcom_camss_8x96_graph.dot
+    :alt:   qcom_camss_8x96_graph.dot
+    :align: center
+
+    Media pipeline graph 8x96
+
+
+Implementation
+--------------
+
+Runtime configuration of the hardware (updating settings while streaming) is
+not required to implement the currently supported functionality. The complete
+configuration on each hardware module is applied on STREAMON ioctl based on
+the current active media links, formats and controls set.
+
+The output size of the scaler module in the VFE is configured with the actual
+compose selection rectangle on the sink pad of the 'msm_vfe0_pix' entity.
+
+The crop output area of the crop module in the VFE is configured with the actual
+crop selection rectangle on the source pad of the 'msm_vfe0_pix' entity.
+
+
+Documentation
+-------------
+
+APQ8016 Specification:
+https://developer.qualcomm.com/download/sd410/snapdragon-410-processor-device-specification.pdf
+Referenced 2016-11-24.
+
+APQ8096 Specification:
+https://developer.qualcomm.com/download/sd820e/qualcomm-snapdragon-820e-processor-apq8096sge-device-specification.pdf
+Referenced 2018-06-22.
+
+References
+----------
+
+.. [#f1] https://source.codeaurora.org/quic/la/kernel/msm-3.10/
+.. [#f2] https://source.codeaurora.org/quic/la/kernel/msm-3.18/
diff --git a/Documentation/admin-guide/media/qcom_camss_8x96_graph.dot b/Documentation/admin-guide/media/qcom_camss_8x96_graph.dot
new file mode 100644
index 000000000000..7ed243b41b67
--- /dev/null
+++ b/Documentation/admin-guide/media/qcom_camss_8x96_graph.dot
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port1 -> n0000000a:port0 [style=dashed]
+	n00000001:port1 -> n0000000d:port0 [style=dashed]
+	n00000001:port1 -> n00000010:port0 [style=dashed]
+	n00000001:port1 -> n00000013:port0 [style=dashed]
+	n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000004:port1 -> n0000000a:port0 [style=dashed]
+	n00000004:port1 -> n0000000d:port0 [style=dashed]
+	n00000004:port1 -> n00000010:port0 [style=dashed]
+	n00000004:port1 -> n00000013:port0 [style=dashed]
+	n00000007 [label="{{<port0> 0} | msm_csiphy2\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000007:port1 -> n0000000a:port0 [style=dashed]
+	n00000007:port1 -> n0000000d:port0 [style=dashed]
+	n00000007:port1 -> n00000010:port0 [style=dashed]
+	n00000007:port1 -> n00000013:port0 [style=dashed]
+	n0000000a [label="{{<port0> 0} | msm_csid0\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000a:port1 -> n00000016:port0 [style=dashed]
+	n0000000a:port1 -> n00000019:port0 [style=dashed]
+	n0000000a:port1 -> n0000001c:port0 [style=dashed]
+	n0000000a:port1 -> n0000001f:port0 [style=dashed]
+	n0000000d [label="{{<port0> 0} | msm_csid1\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000d:port1 -> n00000016:port0 [style=dashed]
+	n0000000d:port1 -> n00000019:port0 [style=dashed]
+	n0000000d:port1 -> n0000001c:port0 [style=dashed]
+	n0000000d:port1 -> n0000001f:port0 [style=dashed]
+	n00000010 [label="{{<port0> 0} | msm_csid2\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000010:port1 -> n00000016:port0 [style=dashed]
+	n00000010:port1 -> n00000019:port0 [style=dashed]
+	n00000010:port1 -> n0000001c:port0 [style=dashed]
+	n00000010:port1 -> n0000001f:port0 [style=dashed]
+	n00000013 [label="{{<port0> 0} | msm_csid3\n/dev/v4l-subdev6 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000013:port1 -> n00000016:port0 [style=dashed]
+	n00000013:port1 -> n00000019:port0 [style=dashed]
+	n00000013:port1 -> n0000001c:port0 [style=dashed]
+	n00000013:port1 -> n0000001f:port0 [style=dashed]
+	n00000016 [label="{{<port0> 0} | msm_ispif0\n/dev/v4l-subdev7 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000016:port1 -> n00000022:port0 [style=dashed]
+	n00000016:port1 -> n0000002b:port0 [style=dashed]
+	n00000016:port1 -> n00000034:port0 [style=dashed]
+	n00000016:port1 -> n0000003d:port0 [style=dashed]
+	n00000016:port1 -> n00000046:port0 [style=dashed]
+	n00000016:port1 -> n0000004f:port0 [style=dashed]
+	n00000016:port1 -> n00000058:port0 [style=dashed]
+	n00000016:port1 -> n00000061:port0 [style=dashed]
+	n00000019 [label="{{<port0> 0} | msm_ispif1\n/dev/v4l-subdev8 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000019:port1 -> n00000022:port0 [style=dashed]
+	n00000019:port1 -> n0000002b:port0 [style=dashed]
+	n00000019:port1 -> n00000034:port0 [style=dashed]
+	n00000019:port1 -> n0000003d:port0 [style=dashed]
+	n00000019:port1 -> n00000046:port0 [style=dashed]
+	n00000019:port1 -> n0000004f:port0 [style=dashed]
+	n00000019:port1 -> n00000058:port0 [style=dashed]
+	n00000019:port1 -> n00000061:port0 [style=dashed]
+	n0000001c [label="{{<port0> 0} | msm_ispif2\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000001c:port1 -> n00000022:port0 [style=dashed]
+	n0000001c:port1 -> n0000002b:port0 [style=dashed]
+	n0000001c:port1 -> n00000034:port0 [style=dashed]
+	n0000001c:port1 -> n0000003d:port0 [style=dashed]
+	n0000001c:port1 -> n00000046:port0 [style=dashed]
+	n0000001c:port1 -> n0000004f:port0 [style=dashed]
+	n0000001c:port1 -> n00000058:port0 [style=dashed]
+	n0000001c:port1 -> n00000061:port0 [style=dashed]
+	n0000001f [label="{{<port0> 0} | msm_ispif3\n/dev/v4l-subdev10 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000001f:port1 -> n00000022:port0 [style=dashed]
+	n0000001f:port1 -> n0000002b:port0 [style=dashed]
+	n0000001f:port1 -> n00000034:port0 [style=dashed]
+	n0000001f:port1 -> n0000003d:port0 [style=dashed]
+	n0000001f:port1 -> n00000046:port0 [style=dashed]
+	n0000001f:port1 -> n0000004f:port0 [style=dashed]
+	n0000001f:port1 -> n00000058:port0 [style=dashed]
+	n0000001f:port1 -> n00000061:port0 [style=dashed]
+	n00000022 [label="{{<port0> 0} | msm_vfe0_rdi0\n/dev/v4l-subdev11 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000022:port1 -> n00000025 [style=bold]
+	n00000025 [label="msm_vfe0_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n0000002b [label="{{<port0> 0} | msm_vfe0_rdi1\n/dev/v4l-subdev12 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000002b:port1 -> n0000002e [style=bold]
+	n0000002e [label="msm_vfe0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n00000034 [label="{{<port0> 0} | msm_vfe0_rdi2\n/dev/v4l-subdev13 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000034:port1 -> n00000037 [style=bold]
+	n00000037 [label="msm_vfe0_video2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+	n0000003d [label="{{<port0> 0} | msm_vfe0_pix\n/dev/v4l-subdev14 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000003d:port1 -> n00000040 [style=bold]
+	n00000040 [label="msm_vfe0_video3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+	n00000046 [label="{{<port0> 0} | msm_vfe1_rdi0\n/dev/v4l-subdev15 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000046:port1 -> n00000049 [style=bold]
+	n00000049 [label="msm_vfe1_video0\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
+	n0000004f [label="{{<port0> 0} | msm_vfe1_rdi1\n/dev/v4l-subdev16 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000004f:port1 -> n00000052 [style=bold]
+	n00000052 [label="msm_vfe1_video1\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
+	n00000058 [label="{{<port0> 0} | msm_vfe1_rdi2\n/dev/v4l-subdev17 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000058:port1 -> n0000005b [style=bold]
+	n0000005b [label="msm_vfe1_video2\n/dev/video6", shape=box, style=filled, fillcolor=yellow]
+	n00000061 [label="{{<port0> 0} | msm_vfe1_pix\n/dev/v4l-subdev18 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000061:port1 -> n00000064 [style=bold]
+	n00000064 [label="msm_vfe1_video3\n/dev/video7", shape=box, style=filled, fillcolor=yellow]
+	n000000e2 [label="{{} | ov5645 3-0039\n/dev/v4l-subdev19 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n000000e2:port0 -> n00000004:port0 [style=bold]
+	n000000e4 [label="{{} | ov5645 3-003a\n/dev/v4l-subdev20 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n000000e4:port0 -> n00000007:port0 [style=bold]
+	n000000e6 [label="{{} | ov5645 3-003b\n/dev/v4l-subdev21 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n000000e6:port0 -> n00000001:port0 [style=bold]
+}
diff --git a/Documentation/admin-guide/media/qcom_camss_graph.dot b/Documentation/admin-guide/media/qcom_camss_graph.dot
new file mode 100644
index 000000000000..ef7dca92fd0b
--- /dev/null
+++ b/Documentation/admin-guide/media/qcom_camss_graph.dot
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port1 -> n00000007:port0 [style=dashed]
+	n00000001:port1 -> n0000000a:port0 [style=dashed]
+	n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000004:port1 -> n00000007:port0 [style=dashed]
+	n00000004:port1 -> n0000000a:port0 [style=dashed]
+	n00000007 [label="{{<port0> 0} | msm_csid0\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000007:port1 -> n0000000d:port0 [style=dashed]
+	n00000007:port1 -> n00000010:port0 [style=dashed]
+	n0000000a [label="{{<port0> 0} | msm_csid1\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000a:port1 -> n0000000d:port0 [style=dashed]
+	n0000000a:port1 -> n00000010:port0 [style=dashed]
+	n0000000d [label="{{<port0> 0} | msm_ispif0\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000d:port1 -> n00000013:port0 [style=dashed]
+	n0000000d:port1 -> n0000001c:port0 [style=dashed]
+	n0000000d:port1 -> n00000025:port0 [style=dashed]
+	n0000000d:port1 -> n0000002e:port0 [style=dashed]
+	n00000010 [label="{{<port0> 0} | msm_ispif1\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000010:port1 -> n00000013:port0 [style=dashed]
+	n00000010:port1 -> n0000001c:port0 [style=dashed]
+	n00000010:port1 -> n00000025:port0 [style=dashed]
+	n00000010:port1 -> n0000002e:port0 [style=dashed]
+	n00000013 [label="{{<port0> 0} | msm_vfe0_rdi0\n/dev/v4l-subdev6 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000013:port1 -> n00000016 [style=bold]
+	n00000016 [label="msm_vfe0_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n0000001c [label="{{<port0> 0} | msm_vfe0_rdi1\n/dev/v4l-subdev7 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000001c:port1 -> n0000001f [style=bold]
+	n0000001f [label="msm_vfe0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n00000025 [label="{{<port0> 0} | msm_vfe0_rdi2\n/dev/v4l-subdev8 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000025:port1 -> n00000028 [style=bold]
+	n00000028 [label="msm_vfe0_video2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+	n0000002e [label="{{<port0> 0} | msm_vfe0_pix\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000002e:port1 -> n00000031 [style=bold]
+	n00000031 [label="msm_vfe0_video3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+	n00000057 [label="{{} | ov5645 1-0076\n/dev/v4l-subdev10 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000057:port0 -> n00000001:port0 [style=bold]
+	n00000059 [label="{{} | ov5645 1-0074\n/dev/v4l-subdev11 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000059:port0 -> n00000004:port0 [style=bold]
+}
diff --git a/Documentation/admin-guide/media/rcar-fdp1.rst b/Documentation/admin-guide/media/rcar-fdp1.rst
new file mode 100644
index 000000000000..88b0edcf9046
--- /dev/null
+++ b/Documentation/admin-guide/media/rcar-fdp1.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Renesas R-Car Fine Display Processor (FDP1) Driver
+==================================================
+
+The R-Car FDP1 driver implements driver-specific controls as follows.
+
+``V4L2_CID_DEINTERLACING_MODE (menu)``
+    The video deinterlacing mode (such as Bob, Weave, ...). The R-Car FDP1
+    driver implements the following modes.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 4
+
+    * - ``"Progressive" (0)``
+      - The input image video stream is progressive (not interlaced). No
+        deinterlacing is performed. Apart from (optional) format and encoding
+        conversion output frames are identical to the input frames.
+    * - ``"Adaptive 2D/3D" (1)``
+      - Motion adaptive version of 2D and 3D deinterlacing. Use 3D deinterlacing
+        in the presence of fast motion and 2D deinterlacing with diagonal
+        interpolation otherwise.
+    * - ``"Fixed 2D" (2)``
+      - The current field is scaled vertically by averaging adjacent lines to
+        recover missing lines. This method is also known as blending or Line
+        Averaging (LAV).
+    * - ``"Fixed 3D" (3)``
+      - The previous and next fields are averaged to recover lines missing from
+        the current field. This method is also known as Field Averaging (FAV).
+    * - ``"Previous field" (4)``
+      - The current field is weaved with the previous field, i.e. the previous
+        field is used to fill missing lines from the current field. This method
+        is also known as weave deinterlacing.
+    * - ``"Next field" (5)``
+      - The current field is weaved with the next field, i.e. the next field is
+        used to fill missing lines from the current field. This method is also
+        known as weave deinterlacing.
diff --git a/Documentation/admin-guide/media/remote-controller.rst b/Documentation/admin-guide/media/remote-controller.rst
new file mode 100644
index 000000000000..fa05410c3cd5
--- /dev/null
+++ b/Documentation/admin-guide/media/remote-controller.rst
@@ -0,0 +1,76 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================================
+Infrared remote control support in video4linux drivers
+======================================================
+
+Authors: Gerd Hoffmann, Mauro Carvalho Chehab
+
+Basics
+======
+
+Most analog and digital TV boards support remote controllers. Several of
+them have a microprocessor that receives the IR carriers, convert into
+pulse/space sequences and then to scan codes, returning such codes to
+userspace ("scancode mode"). Other boards return just the pulse/space
+sequences ("raw mode").
+
+The support for remote controller in scancode mode is provided by the
+standard Linux input layer. The support for raw mode is provided via LIRC.
+
+In order to check the support and test it, it is suggested to download
+the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_. It provides
+two tools to handle remote controllers:
+
+- ir-keytable: provides a way to query the remote controller, list the
+  protocols it supports, enable in-kernel support for IR decoder or
+  switch the protocol and to test the reception of scan codes;
+
+- ir-ctl: provide tools to handle remote controllers that support raw mode
+  via LIRC interface.
+
+Usually, the remote controller module is auto-loaded when the TV card is
+detected. However, for a few devices, you need to manually load the
+ir-kbd-i2c module.
+
+How it works
+============
+
+The modules register the remote as keyboard within the linux input
+layer, i.e. you'll see the keys of the remote as normal key strokes
+(if CONFIG_INPUT_KEYBOARD is enabled).
+
+Using the event devices (CONFIG_INPUT_EVDEV) it is possible for
+applications to access the remote via /dev/input/event<n> devices.
+The udev/systemd will automatically create the devices. If you install
+the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_, it may also
+automatically load a different keytable than the default one. Please see
+`v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ ir-keytable.1
+man page for details.
+
+The ir-keytable tool is nice for trouble shooting, i.e. to check
+whenever the input device is really present, which of the devices it
+is, check whenever pressing keys on the remote actually generates
+events and the like.  You can also use any other input utility that changes
+the keymaps, like the input kbd utility.
+
+
+Using with lircd
+----------------
+
+The latest versions of the lircd daemon supports reading events from the
+linux input layer (via event device). It also supports receiving IR codes
+in lirc mode.
+
+
+Using without lircd
+-------------------
+
+Xorg recognizes several IR keycodes that have its numerical value lower
+than 247. With the advent of Wayland, the input driver got updated too,
+and should now accept all keycodes. Yet, you may want to just reasign
+the keycodes to something that your favorite media application likes.
+
+This can be done by setting
+`v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ to load your own
+keytable in runtime. Please read  ir-keytable.1 man page for details.
diff --git a/Documentation/admin-guide/media/saa7134-cardlist.rst b/Documentation/admin-guide/media/saa7134-cardlist.rst
new file mode 100644
index 000000000000..afb0e2fb52b0
--- /dev/null
+++ b/Documentation/admin-guide/media/saa7134-cardlist.rst
@@ -0,0 +1,803 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+SAA7134 cards list
+==================
+
+.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - PCI IDs
+
+   * - 0
+     - UNKNOWN/GENERIC
+     -
+
+   * - 1
+     - Proteus Pro [philips reference design]
+     - 1131:2001, 1131:2001
+
+   * - 2
+     - LifeView FlyVIDEO3000
+     - 5168:0138, 4e42:0138
+
+   * - 3
+     - LifeView/Typhoon FlyVIDEO2000
+     - 5168:0138, 4e42:0138
+
+   * - 4
+     - EMPRESS
+     - 1131:6752
+
+   * - 5
+     - SKNet Monster TV
+     - 1131:4e85
+
+   * - 6
+     - Tevion MD 9717
+     -
+
+   * - 7
+     - KNC One TV-Station RDS / Typhoon TV Tuner RDS
+     - 1131:fe01, 1894:fe01
+
+   * - 8
+     - Terratec Cinergy 400 TV
+     - 153b:1142
+
+   * - 9
+     - Medion 5044
+     -
+
+   * - 10
+     - Kworld/KuroutoShikou SAA7130-TVPCI
+     -
+
+   * - 11
+     - Terratec Cinergy 600 TV
+     - 153b:1143
+
+   * - 12
+     - Medion 7134
+     - 16be:0003, 16be:5000
+
+   * - 13
+     - Typhoon TV+Radio 90031
+     -
+
+   * - 14
+     - ELSA EX-VISION 300TV
+     - 1048:226b
+
+   * - 15
+     - ELSA EX-VISION 500TV
+     - 1048:226a
+
+   * - 16
+     - ASUS TV-FM 7134
+     - 1043:4842, 1043:4830, 1043:4840
+
+   * - 17
+     - AOPEN VA1000 POWER
+     - 1131:7133
+
+   * - 18
+     - BMK MPEX No Tuner
+     -
+
+   * - 19
+     - Compro VideoMate TV
+     - 185b:c100
+
+   * - 20
+     - Matrox CronosPlus
+     - 102B:48d0
+
+   * - 21
+     - 10MOONS PCI TV CAPTURE CARD
+     - 1131:2001
+
+   * - 22
+     - AverMedia M156 / Medion 2819
+     - 1461:a70b
+
+   * - 23
+     - BMK MPEX Tuner
+     -
+
+   * - 24
+     - KNC One TV-Station DVR
+     - 1894:a006
+
+   * - 25
+     - ASUS TV-FM 7133
+     - 1043:4843
+
+   * - 26
+     - Pinnacle PCTV Stereo (saa7134)
+     - 11bd:002b
+
+   * - 27
+     - Manli MuchTV M-TV002
+     -
+
+   * - 28
+     - Manli MuchTV M-TV001
+     -
+
+   * - 29
+     - Nagase Sangyo TransGear 3000TV
+     - 1461:050c
+
+   * - 30
+     - Elitegroup ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM)
+     - 1019:4cb4
+
+   * - 31
+     - Elitegroup ECS TVP3XP FM1236 Tuner Card (NTSC,FM)
+     - 1019:4cb5
+
+   * - 32
+     - AVACS SmartTV
+     -
+
+   * - 33
+     - AVerMedia DVD EZMaker
+     - 1461:10ff
+
+   * - 34
+     - Noval Prime TV 7133
+     -
+
+   * - 35
+     - AverMedia AverTV Studio 305
+     - 1461:2115
+
+   * - 36
+     - UPMOST PURPLE TV
+     - 12ab:0800
+
+   * - 37
+     - Items MuchTV Plus / IT-005
+     -
+
+   * - 38
+     - Terratec Cinergy 200 TV
+     - 153b:1152
+
+   * - 39
+     - LifeView FlyTV Platinum Mini
+     - 5168:0212, 4e42:0212, 5169:1502
+
+   * - 40
+     - Compro VideoMate TV PVR/FM
+     - 185b:c100
+
+   * - 41
+     - Compro VideoMate TV Gold+
+     - 185b:c100
+
+   * - 42
+     - Sabrent SBT-TVFM (saa7130)
+     -
+
+   * - 43
+     - :Zolid Xpert TV7134
+     -
+
+   * - 44
+     - Empire PCI TV-Radio LE
+     -
+
+   * - 45
+     - Avermedia AVerTV Studio 307
+     - 1461:9715
+
+   * - 46
+     - AVerMedia Cardbus TV/Radio (E500)
+     - 1461:d6ee
+
+   * - 47
+     - Terratec Cinergy 400 mobile
+     - 153b:1162
+
+   * - 48
+     - Terratec Cinergy 600 TV MK3
+     - 153b:1158
+
+   * - 49
+     - Compro VideoMate Gold+ Pal
+     - 185b:c200
+
+   * - 50
+     - Pinnacle PCTV 300i DVB-T + PAL
+     - 11bd:002d
+
+   * - 51
+     - ProVideo PV952
+     - 1540:9524
+
+   * - 52
+     - AverMedia AverTV/305
+     - 1461:2108
+
+   * - 53
+     - ASUS TV-FM 7135
+     - 1043:4845
+
+   * - 54
+     - LifeView FlyTV Platinum FM / Gold
+     - 5168:0214, 5168:5214, 1489:0214, 5168:0304
+
+   * - 55
+     - LifeView FlyDVB-T DUO / MSI TV@nywhere Duo
+     - 5168:0306, 4E42:0306
+
+   * - 56
+     - Avermedia AVerTV 307
+     - 1461:a70a
+
+   * - 57
+     - Avermedia AVerTV GO 007 FM
+     - 1461:f31f
+
+   * - 58
+     - ADS Tech Instant TV (saa7135)
+     - 1421:0350, 1421:0351, 1421:0370, 1421:1370
+
+   * - 59
+     - Kworld/Tevion V-Stream Xpert TV PVR7134
+     -
+
+   * - 60
+     - LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus
+     - 5168:0502, 4e42:0502, 1489:0502
+
+   * - 61
+     - Philips TOUGH DVB-T reference design
+     - 1131:2004
+
+   * - 62
+     - Compro VideoMate TV Gold+II
+     -
+
+   * - 63
+     - Kworld Xpert TV PVR7134
+     -
+
+   * - 64
+     - FlyTV mini Asus Digimatrix
+     - 1043:0210
+
+   * - 65
+     - V-Stream Studio TV Terminator
+     -
+
+   * - 66
+     - Yuan TUN-900 (saa7135)
+     -
+
+   * - 67
+     - Beholder BeholdTV 409 FM
+     - 0000:4091
+
+   * - 68
+     - GoTView 7135 PCI
+     - 5456:7135
+
+   * - 69
+     - Philips EUROPA V3 reference design
+     - 1131:2004
+
+   * - 70
+     - Compro Videomate DVB-T300
+     - 185b:c900
+
+   * - 71
+     - Compro Videomate DVB-T200
+     - 185b:c901
+
+   * - 72
+     - RTD Embedded Technologies VFG7350
+     - 1435:7350
+
+   * - 73
+     - RTD Embedded Technologies VFG7330
+     - 1435:7330
+
+   * - 74
+     - LifeView FlyTV Platinum Mini2
+     - 14c0:1212
+
+   * - 75
+     - AVerMedia AVerTVHD MCE A180
+     - 1461:1044
+
+   * - 76
+     - SKNet MonsterTV Mobile
+     - 1131:4ee9
+
+   * - 77
+     - Pinnacle PCTV 40i/50i/110i (saa7133)
+     - 11bd:002e
+
+   * - 78
+     - ASUSTeK P7131 Dual
+     - 1043:4862
+
+   * - 79
+     - Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
+     -
+
+   * - 80
+     - ASUS Digimatrix TV
+     - 1043:0210
+
+   * - 81
+     - Philips Tiger reference design
+     - 1131:2018
+
+   * - 82
+     - MSI TV@Anywhere plus
+     - 1462:6231, 1462:8624
+
+   * - 83
+     - Terratec Cinergy 250 PCI TV
+     - 153b:1160
+
+   * - 84
+     - LifeView FlyDVB Trio
+     - 5168:0319
+
+   * - 85
+     - AverTV DVB-T 777
+     - 1461:2c05, 1461:2c05
+
+   * - 86
+     - LifeView FlyDVB-T / Genius VideoWonder DVB-T
+     - 5168:0301, 1489:0301
+
+   * - 87
+     - ADS Instant TV Duo Cardbus PTV331
+     - 0331:1421
+
+   * - 88
+     - Tevion/KWorld DVB-T 220RF
+     - 17de:7201
+
+   * - 89
+     - ELSA EX-VISION 700TV
+     - 1048:226c
+
+   * - 90
+     - Kworld ATSC110/115
+     - 17de:7350, 17de:7352
+
+   * - 91
+     - AVerMedia A169 B
+     - 1461:7360
+
+   * - 92
+     - AVerMedia A169 B1
+     - 1461:6360
+
+   * - 93
+     - Medion 7134 Bridge #2
+     - 16be:0005
+
+   * - 94
+     - LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB
+     - 5168:3306, 5168:3502, 5168:3307, 4e42:3502
+
+   * - 95
+     - LifeView FlyVIDEO3000 (NTSC)
+     - 5169:0138
+
+   * - 96
+     - Medion Md8800 Quadro
+     - 16be:0007, 16be:0008, 16be:000d
+
+   * - 97
+     - LifeView FlyDVB-S /Acorp TV134DS
+     - 5168:0300, 4e42:0300
+
+   * - 98
+     - Proteus Pro 2309
+     - 0919:2003
+
+   * - 99
+     - AVerMedia TV Hybrid A16AR
+     - 1461:2c00
+
+   * - 100
+     - Asus Europa2 OEM
+     - 1043:4860
+
+   * - 101
+     - Pinnacle PCTV 310i
+     - 11bd:002f
+
+   * - 102
+     - Avermedia AVerTV Studio 507
+     - 1461:9715
+
+   * - 103
+     - Compro Videomate DVB-T200A
+     -
+
+   * - 104
+     - Hauppauge WinTV-HVR1110 DVB-T/Hybrid
+     - 0070:6700, 0070:6701, 0070:6702, 0070:6703, 0070:6704, 0070:6705
+
+   * - 105
+     - Terratec Cinergy HT PCMCIA
+     - 153b:1172
+
+   * - 106
+     - Encore ENLTV
+     - 1131:2342, 1131:2341, 3016:2344
+
+   * - 107
+     - Encore ENLTV-FM
+     - 1131:230f
+
+   * - 108
+     - Terratec Cinergy HT PCI
+     - 153b:1175
+
+   * - 109
+     - Philips Tiger - S Reference design
+     -
+
+   * - 110
+     - Avermedia M102
+     - 1461:f31e
+
+   * - 111
+     - ASUS P7131 4871
+     - 1043:4871
+
+   * - 112
+     - ASUSTeK P7131 Hybrid
+     - 1043:4876
+
+   * - 113
+     - Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM)
+     - 1019:4cb6
+
+   * - 114
+     - KWorld DVB-T 210
+     - 17de:7250
+
+   * - 115
+     - Sabrent PCMCIA TV-PCB05
+     - 0919:2003
+
+   * - 116
+     - 10MOONS TM300 TV Card
+     - 1131:2304
+
+   * - 117
+     - Avermedia Super 007
+     - 1461:f01d
+
+   * - 118
+     - Beholder BeholdTV 401
+     - 0000:4016
+
+   * - 119
+     - Beholder BeholdTV 403
+     - 0000:4036
+
+   * - 120
+     - Beholder BeholdTV 403 FM
+     - 0000:4037
+
+   * - 121
+     - Beholder BeholdTV 405
+     - 0000:4050
+
+   * - 122
+     - Beholder BeholdTV 405 FM
+     - 0000:4051
+
+   * - 123
+     - Beholder BeholdTV 407
+     - 0000:4070
+
+   * - 124
+     - Beholder BeholdTV 407 FM
+     - 0000:4071
+
+   * - 125
+     - Beholder BeholdTV 409
+     - 0000:4090
+
+   * - 126
+     - Beholder BeholdTV 505 FM
+     - 5ace:5050
+
+   * - 127
+     - Beholder BeholdTV 507 FM / BeholdTV 509 FM
+     - 5ace:5070, 5ace:5090
+
+   * - 128
+     - Beholder BeholdTV Columbus TV/FM
+     - 0000:5201
+
+   * - 129
+     - Beholder BeholdTV 607 FM
+     - 5ace:6070
+
+   * - 130
+     - Beholder BeholdTV M6
+     - 5ace:6190
+
+   * - 131
+     - Twinhan Hybrid DTV-DVB 3056 PCI
+     - 1822:0022
+
+   * - 132
+     - Genius TVGO AM11MCE
+     -
+
+   * - 133
+     - NXP Snake DVB-S reference design
+     -
+
+   * - 134
+     - Medion/Creatix CTX953 Hybrid
+     - 16be:0010
+
+   * - 135
+     - MSI TV@nywhere A/D v1.1
+     - 1462:8625
+
+   * - 136
+     - AVerMedia Cardbus TV/Radio (E506R)
+     - 1461:f436
+
+   * - 137
+     - AVerMedia Hybrid TV/Radio (A16D)
+     - 1461:f936
+
+   * - 138
+     - Avermedia M115
+     - 1461:a836
+
+   * - 139
+     - Compro VideoMate T750
+     - 185b:c900
+
+   * - 140
+     - Avermedia DVB-S Pro A700
+     - 1461:a7a1
+
+   * - 141
+     - Avermedia DVB-S Hybrid+FM A700
+     - 1461:a7a2
+
+   * - 142
+     - Beholder BeholdTV H6
+     - 5ace:6290
+
+   * - 143
+     - Beholder BeholdTV M63
+     - 5ace:6191
+
+   * - 144
+     - Beholder BeholdTV M6 Extra
+     - 5ace:6193
+
+   * - 145
+     - AVerMedia MiniPCI DVB-T Hybrid M103
+     - 1461:f636, 1461:f736
+
+   * - 146
+     - ASUSTeK P7131 Analog
+     -
+
+   * - 147
+     - Asus Tiger 3in1
+     - 1043:4878
+
+   * - 148
+     - Encore ENLTV-FM v5.3
+     - 1a7f:2008
+
+   * - 149
+     - Avermedia PCI pure analog (M135A)
+     - 1461:f11d
+
+   * - 150
+     - Zogis Real Angel 220
+     -
+
+   * - 151
+     - ADS Tech Instant HDTV
+     - 1421:0380
+
+   * - 152
+     - Asus Tiger Rev:1.00
+     - 1043:4857
+
+   * - 153
+     - Kworld Plus TV Analog Lite PCI
+     - 17de:7128
+
+   * - 154
+     - Avermedia AVerTV GO 007 FM Plus
+     - 1461:f31d
+
+   * - 155
+     - Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid
+     - 0070:6706, 0070:6708
+
+   * - 156
+     - Hauppauge WinTV-HVR1120 DVB-T/Hybrid
+     - 0070:6707, 0070:6709, 0070:670a
+
+   * - 157
+     - Avermedia AVerTV Studio 507UA
+     - 1461:a11b
+
+   * - 158
+     - AVerMedia Cardbus TV/Radio (E501R)
+     - 1461:b7e9
+
+   * - 159
+     - Beholder BeholdTV 505 RDS
+     - 0000:505B
+
+   * - 160
+     - Beholder BeholdTV 507 RDS
+     - 0000:5071
+
+   * - 161
+     - Beholder BeholdTV 507 RDS
+     - 0000:507B
+
+   * - 162
+     - Beholder BeholdTV 607 FM
+     - 5ace:6071
+
+   * - 163
+     - Beholder BeholdTV 609 FM
+     - 5ace:6090
+
+   * - 164
+     - Beholder BeholdTV 609 FM
+     - 5ace:6091
+
+   * - 165
+     - Beholder BeholdTV 607 RDS
+     - 5ace:6072
+
+   * - 166
+     - Beholder BeholdTV 607 RDS
+     - 5ace:6073
+
+   * - 167
+     - Beholder BeholdTV 609 RDS
+     - 5ace:6092
+
+   * - 168
+     - Beholder BeholdTV 609 RDS
+     - 5ace:6093
+
+   * - 169
+     - Compro VideoMate S350/S300
+     - 185b:c900
+
+   * - 170
+     - AverMedia AverTV Studio 505
+     - 1461:a115
+
+   * - 171
+     - Beholder BeholdTV X7
+     - 5ace:7595
+
+   * - 172
+     - RoverMedia TV Link Pro FM
+     - 19d1:0138
+
+   * - 173
+     - Zolid Hybrid TV Tuner PCI
+     - 1131:2004
+
+   * - 174
+     - Asus Europa Hybrid OEM
+     - 1043:4847
+
+   * - 175
+     - Leadtek Winfast DTV1000S
+     - 107d:6655
+
+   * - 176
+     - Beholder BeholdTV 505 RDS
+     - 0000:5051
+
+   * - 177
+     - Hawell HW-404M7
+     -
+
+   * - 178
+     - Beholder BeholdTV H7
+     - 5ace:7190
+
+   * - 179
+     - Beholder BeholdTV A7
+     - 5ace:7090
+
+   * - 180
+     - Avermedia PCI M733A
+     - 1461:4155, 1461:4255
+
+   * - 181
+     - TechoTrend TT-budget T-3000
+     - 13c2:2804
+
+   * - 182
+     - Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid
+     - 17de:b136
+
+   * - 183
+     - Compro VideoMate Vista M1F
+     - 185b:c900
+
+   * - 184
+     - Encore ENLTV-FM 3
+     - 1a7f:2108
+
+   * - 185
+     - MagicPro ProHDTV Pro2 DMB-TH/Hybrid
+     - 17de:d136
+
+   * - 186
+     - Beholder BeholdTV 501
+     - 5ace:5010
+
+   * - 187
+     - Beholder BeholdTV 503 FM
+     - 5ace:5030
+
+   * - 188
+     - Sensoray 811/911
+     - 6000:0811, 6000:0911
+
+   * - 189
+     - Kworld PC150-U
+     - 17de:a134
+
+   * - 190
+     - Asus My Cinema PS3-100
+     - 1043:48cd
+
+   * - 191
+     - Hawell HW-9004V1
+     -
+
+   * - 192
+     - AverMedia AverTV Satellite Hybrid+FM A706
+     - 1461:2055
+
+   * - 193
+     - WIS Voyager or compatible
+     - 1905:7007
+
+   * - 194
+     - AverMedia AverTV/505
+     - 1461:a10a
+
+   * - 195
+     - Leadtek Winfast TV2100 FM
+     - 107d:6f3a
+
+   * - 196
+     - SnaZio* TVPVR PRO
+     - 1779:13cf
diff --git a/Documentation/admin-guide/media/saa7134.rst b/Documentation/admin-guide/media/saa7134.rst
new file mode 100644
index 000000000000..7ab9c70b9abe
--- /dev/null
+++ b/Documentation/admin-guide/media/saa7134.rst
@@ -0,0 +1,88 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The saa7134 driver
+==================
+
+Author Gerd Hoffmann
+
+
+This is a v4l2/oss device driver for saa7130/33/34/35 based capture / TV
+boards.
+
+
+Status
+------
+
+Almost everything is working.  video, sound, tuner, radio, mpeg ts, ...
+
+As with bttv, card-specific tweaks are needed.  Check CARDLIST for a
+list of known TV cards and saa7134-cards.c for the drivers card
+configuration info.
+
+
+Build
+-----
+
+Once you pick up a Kernel source, you should configure, build,
+install and boot the new kernel.  You'll need at least
+these config options::
+
+    ./scripts/config -e PCI
+    ./scripts/config -e INPUT
+    ./scripts/config -m I2C
+    ./scripts/config -m MEDIA_SUPPORT
+    ./scripts/config -e MEDIA_PCI_SUPPORT
+    ./scripts/config -e MEDIA_ANALOG_TV_SUPPORT
+    ./scripts/config -e MEDIA_DIGITAL_TV_SUPPORT
+    ./scripts/config -e MEDIA_RADIO_SUPPORT
+    ./scripts/config -e RC_CORE
+    ./scripts/config -e MEDIA_SUBDRV_AUTOSELECT
+    ./scripts/config -m VIDEO_SAA7134
+    ./scripts/config -e SAA7134_ALSA
+    ./scripts/config -e VIDEO_SAA7134_RC
+    ./scripts/config -e VIDEO_SAA7134_DVB
+    ./scripts/config -e VIDEO_SAA7134_GO7007
+
+To build and install, you should run::
+
+    make && make modules_install && make install
+
+Once the new Kernel is booted, saa7134 driver should be loaded automatically.
+
+Depending on the card you might have to pass ``card=<nr>`` as insmod option.
+If so, please check :doc:`saa7134-cardlist` for valid choices.
+
+Once you have your card type number, you can pass a modules configuration
+via a file (usually, it is either ``/etc/modules.conf`` or some file at
+``/etc/modules-load.d/``, but the actual place depends on your
+distribution), with this content::
+
+    options saa7134 card=13 # Assuming that your card type is #13
+
+
+Changes / Fixes
+---------------
+
+Please mail to linux-media AT vger.kernel.org unified diffs against
+the linux media git tree:
+
+    https://git.linuxtv.org/media_tree.git/
+
+This is done by committing a patch at a clone of the git tree and
+submitting the patch using ``git send-email``. Don't forget to
+describe at the lots  what it changes / which problem it fixes / whatever
+it is good for ...
+
+
+Known Problems
+--------------
+
+* The tuner for the flyvideos isn't detected automatically and the
+  default might not work for you depending on which version you have.
+  There is a ``tuner=`` insmod option to override the driver's default.
+
+Credits
+-------
+
+andrew.stevens@philips.com + werner.leeb@philips.com for providing
+saa7134 hardware specs and sample board.
diff --git a/Documentation/admin-guide/media/saa7164-cardlist.rst b/Documentation/admin-guide/media/saa7164-cardlist.rst
new file mode 100644
index 000000000000..e8f36e084537
--- /dev/null
+++ b/Documentation/admin-guide/media/saa7164-cardlist.rst
@@ -0,0 +1,71 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+SAA7164 cards list
+==================
+
+.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - PCI IDs
+
+   * - 0
+     - Unknown
+     -
+
+   * - 1
+     - Generic Rev2
+     -
+
+   * - 2
+     - Generic Rev3
+     -
+
+   * - 3
+     - Hauppauge WinTV-HVR2250
+     - 0070:8880, 0070:8810
+
+   * - 4
+     - Hauppauge WinTV-HVR2200
+     - 0070:8980
+
+   * - 5
+     - Hauppauge WinTV-HVR2200
+     - 0070:8900
+
+   * - 6
+     - Hauppauge WinTV-HVR2200
+     - 0070:8901
+
+   * - 7
+     - Hauppauge WinTV-HVR2250
+     - 0070:8891, 0070:8851
+
+   * - 8
+     - Hauppauge WinTV-HVR2250
+     - 0070:88A1
+
+   * - 9
+     - Hauppauge WinTV-HVR2200
+     - 0070:8940
+
+   * - 10
+     - Hauppauge WinTV-HVR2200
+     - 0070:8953
+
+   * - 11
+     - Hauppauge WinTV-HVR2255(proto)
+     - 0070:f111
+
+   * - 12
+     - Hauppauge WinTV-HVR2255
+     - 0070:f111
+
+   * - 13
+     - Hauppauge WinTV-HVR2205
+     - 0070:f123, 0070:f120
diff --git a/Documentation/admin-guide/media/si470x.rst b/Documentation/admin-guide/media/si470x.rst
new file mode 100644
index 000000000000..d53bf5f95200
--- /dev/null
+++ b/Documentation/admin-guide/media/si470x.rst
@@ -0,0 +1,167 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+The Silicon Labs Si470x FM Radio Receivers driver
+=================================================
+
+Copyright |copy| 2009 Tobias Lorenz <tobias.lorenz@gmx.net>
+
+
+Information from Silicon Labs
+-----------------------------
+
+Silicon Laboratories is the manufacturer of the radio ICs, that nowadays are the
+most often used radio receivers in cell phones. Usually they are connected with
+I2C. But SiLabs also provides a reference design, which integrates this IC,
+together with a small microcontroller C8051F321, to form a USB radio.
+Part of this reference design is also a radio application in binary and source
+code. The software also contains an automatic firmware upgrade to the most
+current version. Information on these can be downloaded here:
+http://www.silabs.com/usbradio
+
+
+Supported ICs
+-------------
+
+The following ICs have a very similar register set, so that they are or will be
+supported somewhen by the driver:
+
+- Si4700: FM radio receiver
+- Si4701: FM radio receiver, RDS Support
+- Si4702: FM radio receiver
+- Si4703: FM radio receiver, RDS Support
+- Si4704: FM radio receiver, no external antenna required
+- Si4705: FM radio receiver, no external antenna required, RDS support, Dig I/O
+- Si4706: Enhanced FM RDS/TMC radio receiver, no external antenna required, RDS
+	  Support
+- Si4707: Dedicated weather band radio receiver with SAME decoder, RDS Support
+- Si4708: Smallest FM receivers
+- Si4709: Smallest FM receivers, RDS Support
+
+More information on these can be downloaded here:
+http://www.silabs.com/products/mcu/Pages/USBFMRadioRD.aspx
+
+
+Supported USB devices
+---------------------
+
+Currently the following USB radios (vendor:product) with the Silicon Labs si470x
+chips are known to work:
+
+- 10c4:818a: Silicon Labs USB FM Radio Reference Design
+- 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF)
+- 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
+- 10c5:819a: Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear)
+
+
+Software
+--------
+
+Testing is usually done with most application under Debian/testing:
+
+- fmtools - Utility for managing FM tuner cards
+- gnomeradio - FM-radio tuner for the GNOME desktop
+- gradio - GTK FM radio tuner
+- kradio - Comfortable Radio Application for KDE
+- radio - ncurses-based radio application
+- mplayer - The Ultimate Movie Player For Linux
+- v4l2-ctl - Collection of command line video4linux utilities
+
+For example, you can use:
+
+.. code-block:: none
+
+	v4l2-ctl -d /dev/radio0 --set-ctrl=volume=10,mute=0 --set-freq=95.21 --all
+
+There is also a library libv4l, which can be used. It's going to have a function
+for frequency seeking, either by using hardware functionality as in radio-si470x
+or by implementing a function as we currently have in every of the mentioned
+programs. Somewhen the radio programs should make use of libv4l.
+
+For processing RDS information, there is a project ongoing at:
+http://rdsd.berlios.de/
+
+There is currently no project for making TMC sentences human readable.
+
+
+Audio Listing
+-------------
+
+USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to
+also select SND_USB_AUDIO, as this is required to get sound from the radio. For
+listing you have to redirect the sound, for example using one of the following
+commands. Please adjust the audio devices to your needs (/dev/dsp* and hw:x,x).
+
+If you just want to test audio (very poor quality):
+
+.. code-block:: none
+
+	cat /dev/dsp1 > /dev/dsp
+
+If you use sox + OSS try:
+
+.. code-block:: none
+
+	sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp
+
+or using sox + alsa:
+
+.. code-block:: none
+
+	sox --endian little -c 2 -S -r 96000 -t alsa hw:1 -t alsa -r 96000 hw:0
+
+If you use arts try:
+
+.. code-block:: none
+
+	arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B -
+
+If you use mplayer try:
+
+.. code-block:: none
+
+	mplayer -radio adevice=hw=1.0:arate=96000 \
+		-rawaudio rate=96000 \
+		radio://<frequency>/capture
+
+Module Parameters
+-----------------
+
+After loading the module, you still have access to some of them in the sysfs
+mount under /sys/module/radio_si470x/parameters. The contents of read-only files
+(0444) are not updated, even if space, band and de are changed using private
+video controls. The others are runtime changeable.
+
+
+Errors
+------
+
+Increase tune_timeout, if you often get -EIO errors.
+
+When timed out or band limit is reached, hw_freq_seek returns -EAGAIN.
+
+If you get any errors from snd_usb_audio, please report them to the ALSA people.
+
+
+Open Issues
+-----------
+
+V4L minor device allocation and parameter setting is not perfect. A solution is
+currently under discussion.
+
+There is an USB interface for downloading/uploading new firmware images. Support
+for it can be implemented using the request_firmware interface.
+
+There is a RDS interrupt mode. The driver is already using the same interface
+for polling RDS information, but is currently not using the interrupt mode.
+
+There is a LED interface, which can be used to override the LED control
+programmed in the firmware. This can be made available using the LED support
+functions in the kernel.
+
+
+Other useful information and links
+----------------------------------
+
+http://www.silabs.com/usbradio
diff --git a/Documentation/admin-guide/media/si4713.rst b/Documentation/admin-guide/media/si4713.rst
new file mode 100644
index 000000000000..be8e6b49b7b4
--- /dev/null
+++ b/Documentation/admin-guide/media/si4713.rst
@@ -0,0 +1,192 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+The Silicon Labs Si4713 FM Radio Transmitter Driver
+===================================================
+
+Copyright |copy| 2009 Nokia Corporation
+
+Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+
+
+Information about the Device
+----------------------------
+
+This chip is a Silicon Labs product. It is a I2C device, currently on 0x63 address.
+Basically, it has transmission and signal noise level measurement features.
+
+The Si4713 integrates transmit functions for FM broadcast stereo transmission.
+The chip also allows integrated receive power scanning to identify low signal
+power FM channels.
+
+The chip is programmed using commands and responses. There are also several
+properties which can change the behavior of this chip.
+
+Users must comply with local regulations on radio frequency (RF) transmission.
+
+Device driver description
+-------------------------
+
+There are two modules to handle this device. One is a I2C device driver
+and the other is a platform driver.
+
+The I2C device driver exports a v4l2-subdev interface to the kernel.
+All properties can also be accessed by v4l2 extended controls interface, by
+using the v4l2-subdev calls (g_ext_ctrls, s_ext_ctrls).
+
+The platform device driver exports a v4l2 radio device interface to user land.
+So, it uses the I2C device driver as a sub device in order to send the user
+commands to the actual device. Basically it is a wrapper to the I2C device driver.
+
+Applications can use v4l2 radio API to specify frequency of operation, mute state,
+etc. But mostly of its properties will be present in the extended controls.
+
+When the v4l2 mute property is set to 1 (true), the driver will turn the chip off.
+
+Properties description
+----------------------
+
+The properties can be accessed using v4l2 extended controls.
+Here is an output from v4l2-ctl util:
+
+.. code-block:: none
+
+	/ # v4l2-ctl -d /dev/radio0 --all -L
+	Driver Info:
+		Driver name   : radio-si4713
+		Card type     : Silicon Labs Si4713 Modulator
+		Bus info      :
+		Driver version: 0
+		Capabilities  : 0x00080800
+			RDS Output
+			Modulator
+	Audio output: 0 (FM Modulator Audio Out)
+	Frequency: 1408000 (88.000000 MHz)
+	Video Standard = 0x00000000
+	Modulator:
+		Name                 : FM Modulator
+		Capabilities         : 62.5 Hz stereo rds
+		Frequency range      : 76.0 MHz - 108.0 MHz
+		Subchannel modulation: stereo+rds
+
+	User Controls
+
+				mute (bool) : default=1 value=0
+
+	FM Radio Modulator Controls
+
+		rds_signal_deviation (int)  : min=0 max=90000 step=10 default=200 value=200 flags=slider
+			rds_program_id (int)  : min=0 max=65535 step=1 default=0 value=0
+		rds_program_type (int)  : min=0 max=31 step=1 default=0 value=0
+			rds_ps_name (str)  : min=0 max=96 step=8 value='si4713  '
+			rds_radio_text (str)  : min=0 max=384 step=32 value=''
+	audio_limiter_feature_enabled (bool) : default=1 value=1
+	audio_limiter_release_time (int)  : min=250 max=102390 step=50 default=5010 value=5010 flags=slider
+		audio_limiter_deviation (int)  : min=0 max=90000 step=10 default=66250 value=66250 flags=slider
+	audio_compression_feature_enabl (bool) : default=1 value=1
+		audio_compression_gain (int)  : min=0 max=20 step=1 default=15 value=15 flags=slider
+	audio_compression_threshold (int)  : min=-40 max=0 step=1 default=-40 value=-40 flags=slider
+	audio_compression_attack_time (int)  : min=0 max=5000 step=500 default=0 value=0 flags=slider
+	audio_compression_release_time (int)  : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider
+	pilot_tone_feature_enabled (bool) : default=1 value=1
+		pilot_tone_deviation (int)  : min=0 max=90000 step=10 default=6750 value=6750 flags=slider
+		pilot_tone_frequency (int)  : min=0 max=19000 step=1 default=19000 value=19000 flags=slider
+		pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1
+		tune_power_level (int)  : min=0 max=120 step=1 default=88 value=88 flags=slider
+		tune_antenna_capacitor (int)  : min=0 max=191 step=1 default=0 value=110 flags=slider
+
+Here is a summary of them:
+
+* Pilot is an audible tone sent by the device.
+
+- pilot_frequency - Configures the frequency of the stereo pilot tone.
+- pilot_deviation - Configures pilot tone frequency deviation level.
+- pilot_enabled - Enables or disables the pilot tone feature.
+
+* The si4713 device is capable of applying audio compression to the
+  transmitted signal.
+
+- acomp_enabled - Enables or disables the audio dynamic range control feature.
+- acomp_gain - Sets the gain for audio dynamic range control.
+- acomp_threshold - Sets the threshold level for audio dynamic range control.
+- acomp_attack_time - Sets the attack time for audio dynamic range control.
+- acomp_release_time - Sets the release time for audio dynamic range control.
+
+* Limiter setups audio deviation limiter feature. Once a over deviation occurs,
+  it is possible to adjust the front-end gain of the audio input and always
+  prevent over deviation.
+
+- limiter_enabled - Enables or disables the limiter feature.
+- limiter_deviation - Configures audio frequency deviation level.
+- limiter_release_time - Sets the limiter release time.
+
+* Tuning power
+
+- power_level - Sets the output power level for signal transmission.
+  antenna_capacitor - This selects the value of antenna tuning capacitor
+  manually or automatically if set to zero.
+
+* RDS related
+
+- rds_ps_name - Sets the RDS ps name field for transmission.
+- rds_radio_text - Sets the RDS radio text for transmission.
+- rds_pi - Sets the RDS PI field for transmission.
+- rds_pty - Sets the RDS PTY field for transmission.
+
+* Region related
+
+- preemphasis - sets the preemphasis to be applied for transmission.
+
+RNL
+---
+
+This device also has an interface to measure received noise level. To do that, you should
+ioctl the device node. Here is an code of example:
+
+.. code-block:: none
+
+	int main (int argc, char *argv[])
+	{
+		struct si4713_rnl rnl;
+		int fd = open("/dev/radio0", O_RDWR);
+		int rval;
+
+		if (argc < 2)
+			return -EINVAL;
+
+		if (fd < 0)
+			return fd;
+
+		sscanf(argv[1], "%d", &rnl.frequency);
+
+		rval = ioctl(fd, SI4713_IOC_MEASURE_RNL, &rnl);
+		if (rval < 0)
+			return rval;
+
+		printf("received noise level: %d\n", rnl.rnl);
+
+		close(fd);
+	}
+
+The struct si4713_rnl and SI4713_IOC_MEASURE_RNL are defined under
+include/linux/platform_data/media/si4713.h.
+
+Stereo/Mono and RDS subchannels
+-------------------------------
+
+The device can also be configured using the available sub channels for
+transmission. To do that use S/G_MODULATOR ioctl and configure txsubchans properly.
+Refer to the V4L2 API specification for proper use of this ioctl.
+
+Testing
+-------
+Testing is usually done with v4l2-ctl utility for managing FM tuner cards.
+The tool can be found in v4l-dvb repository under v4l2-apps/util directory.
+
+Example for setting rds ps name:
+
+.. code-block:: none
+
+	# v4l2-ctl -d /dev/radio0 --set-ctrl=rds_ps_name="Dummy"
+
diff --git a/Documentation/admin-guide/media/si476x.rst b/Documentation/admin-guide/media/si476x.rst
new file mode 100644
index 000000000000..87062301d6a1
--- /dev/null
+++ b/Documentation/admin-guide/media/si476x.rst
@@ -0,0 +1,160 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+
+The SI476x Driver
+=================
+
+Copyright |copy| 2013 Andrey Smirnov <andrew.smirnov@gmail.com>
+
+TODO for the driver
+-------------------
+
+- According to the SiLabs' datasheet it is possible to update the
+  firmware of the radio chip in the run-time, thus bringing it to the
+  most recent version. Unfortunately I couldn't find any mentioning of
+  the said firmware update for the old chips that I tested the driver
+  against, so for chips like that the driver only exposes the old
+  functionality.
+
+
+Parameters exposed over debugfs
+-------------------------------
+SI476x allow user to get multiple characteristics that can be very
+useful for EoL testing/RF performance estimation, parameters that have
+very little to do with V4L2 subsystem. Such parameters are exposed via
+debugfs and can be accessed via regular file I/O operations.
+
+The drivers exposes following files:
+
+* /sys/kernel/debug/<device-name>/acf
+  This file contains ACF(Automatically Controlled Features) status
+  information. The contents of the file is binary data of the
+  following layout:
+
+  .. tabularcolumns:: |p{7ex}|p{12ex}|L|
+
+  =============  ==============   ====================================
+  Offset	 Name		  Description
+  =============  ==============   ====================================
+  0x00		 blend_int	  Flag, set when stereo separation has
+				  crossed below the blend threshold
+  0x01		 hblend_int	  Flag, set when HiBlend cutoff
+				  frequency is lower than threshold
+  0x02		 hicut_int	  Flag, set when HiCut cutoff
+				  frequency is lower than threshold
+  0x03		 chbw_int	  Flag, set when channel filter
+				  bandwidth is less than threshold
+  0x04		 softmute_int	  Flag indicating that softmute
+				  attenuation has increased above
+				  softmute threshold
+  0x05		 smute		  0 - Audio is not soft muted
+				  1 - Audio is soft muted
+  0x06		 smattn		  Soft mute attenuation level in dB
+  0x07		 chbw		  Channel filter bandwidth in kHz
+  0x08		 hicut		  HiCut cutoff frequency in units of
+				  100Hz
+  0x09		 hiblend	  HiBlend cutoff frequency in units
+				  of 100 Hz
+  0x10		 pilot		  0 - Stereo pilot is not present
+				  1 - Stereo pilot is present
+  0x11		 stblend	  Stereo blend in %
+  =============  ==============   ====================================
+
+
+* /sys/kernel/debug/<device-name>/rds_blckcnt
+  This file contains statistics about RDS receptions. It's binary data
+  has the following layout:
+
+  .. tabularcolumns:: |p{7ex}|p{12ex}|L|
+
+  =============  ==============   ====================================
+  Offset	 Name		  Description
+  =============  ==============   ====================================
+  0x00		 expected	  Number of expected RDS blocks
+  0x02		 received	  Number of received RDS blocks
+  0x04		 uncorrectable	  Number of uncorrectable RDS blocks
+  =============  ==============   ====================================
+
+* /sys/kernel/debug/<device-name>/agc
+  This file contains information about parameters pertaining to
+  AGC(Automatic Gain Control)
+
+  The layout is:
+
+  .. tabularcolumns:: |p{7ex}|p{12ex}|L|
+
+  =============  ==============   ====================================
+  Offset	 Name		  Description
+  =============  ==============   ====================================
+  0x00		 mxhi		  0 - FM Mixer PD high threshold is
+				  not tripped
+				  1 - FM Mixer PD high threshold is
+				  tripped
+  0x01		 mxlo		  ditto for FM Mixer PD low
+  0x02		 lnahi		  ditto for FM LNA PD high
+  0x03		 lnalo		  ditto for FM LNA PD low
+  0x04		 fmagc1		  FMAGC1 attenuator resistance
+				  (see datasheet for more detail)
+  0x05		 fmagc2		  ditto for FMAGC2
+  0x06		 pgagain	  PGA gain in dB
+  0x07		 fmwblang	  FM/WB LNA Gain in dB
+  =============  ==============   ====================================
+
+* /sys/kernel/debug/<device-name>/rsq
+  This file contains information about parameters pertaining to
+  RSQ(Received Signal Quality)
+
+  The layout is:
+
+  .. tabularcolumns:: |p{7ex}|p{12ex}|p{60ex}|
+
+  =============  ==============   ====================================
+  Offset	 Name		  Description
+  =============  ==============   ====================================
+  0x00		 multhint	  0 - multipath value has not crossed
+				  the Multipath high threshold
+				  1 - multipath value has crossed
+				  the Multipath high threshold
+  0x01		 multlint	  ditto for Multipath low threshold
+  0x02		 snrhint	  0 - received signal's SNR has not
+				  crossed high threshold
+				  1 - received signal's SNR has
+				  crossed high threshold
+  0x03		 snrlint	  ditto for low threshold
+  0x04		 rssihint	  ditto for RSSI high threshold
+  0x05		 rssilint	  ditto for RSSI low threshold
+  0x06		 bltf		  Flag indicating if seek command
+				  reached/wrapped seek band limit
+  0x07		 snr_ready	  Indicates that SNR metrics is ready
+  0x08		 rssiready	  ditto for RSSI metrics
+  0x09		 injside	  0 - Low-side injection is being used
+				  1 - High-side injection is used
+  0x10		 afcrl		  Flag indicating if AFC rails
+  0x11		 valid		  Flag indicating if channel is valid
+  0x12		 readfreq	  Current tuned frequency
+  0x14		 freqoff	  Signed frequency offset in units of
+				  2ppm
+  0x15		 rssi		  Signed value of RSSI in dBuV
+  0x16		 snr		  Signed RF SNR in dB
+  0x17		 issi		  Signed Image Strength Signal
+				  indicator
+  0x18		 lassi		  Signed Low side adjacent Channel
+				  Strength indicator
+  0x19		 hassi		  ditto fpr High side
+  0x20		 mult		  Multipath indicator
+  0x21		 dev		  Frequency deviation
+  0x24		 assi		  Adjacent channel SSI
+  0x25		 usn		  Ultrasonic noise indicator
+  0x26		 pilotdev	  Pilot deviation in units of 100 Hz
+  0x27		 rdsdev		  ditto for RDS
+  0x28		 assidev	  ditto for ASSI
+  0x29		 strongdev	  Frequency deviation
+  0x30		 rdspi		  RDS PI code
+  =============  ==============   ====================================
+
+* /sys/kernel/debug/<device-name>/rsq_primary
+  This file contains information about parameters pertaining to
+  RSQ(Received Signal Quality) for primary tuner only. Layout is as
+  the one above.
diff --git a/Documentation/admin-guide/media/siano-cardlist.rst b/Documentation/admin-guide/media/siano-cardlist.rst
new file mode 100644
index 000000000000..d387c04d753c
--- /dev/null
+++ b/Documentation/admin-guide/media/siano-cardlist.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Siano cards list
+================
+
+.. tabularcolumns:: p{13.3cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 17 16
+   :stub-columns: 0
+
+   * - Card name
+     - USB IDs
+   * - Hauppauge Catamount
+     - 2040:1700
+   * - Hauppauge Okemo-A
+     - 2040:1800
+   * - Hauppauge Okemo-B
+     - 2040:1801
+   * - Hauppauge WinTV MiniCard
+     - 2040:2000, 2040:200a, 2040:2010, 2040:2011, 2040:2019
+   * - Hauppauge WinTV MiniCard
+     - 2040:2009
+   * - Hauppauge WinTV MiniStick
+     - 2040:5500, 2040:5510, 2040:5520, 2040:5530, 2040:5580, 2040:5590, 2040:b900, 2040:b910, 2040:b980, 2040:b990, 2040:c000, 2040:c010, 2040:c080, 2040:c090, 2040:c0a0, 2040:f5a0
+   * - Hauppauge microStick 77e
+     - 2013:0257
+   * - ONDA Data Card Digital Receiver
+     - 19D2:0078
+   * - Siano Denver (ATSC-M/H) Digital Receiver
+     - 187f:0800
+   * - Siano Denver (TDMB) Digital Receiver
+     - 187f:0700
+   * - Siano Ming Digital Receiver
+     - 187f:0310
+   * - Siano Nice Digital Receiver
+     - 187f:0202, 187f:0202
+   * - Siano Nova A Digital Receiver
+     - 187f:0200
+   * - Siano Nova B Digital Receiver
+     - 187f:0201
+   * - Siano Pele Digital Receiver
+     - 187f:0500
+   * - Siano Rio Digital Receiver
+     - 187f:0600, 3275:0080
+   * - Siano Stellar Digital Receiver
+     - 187f:0100
+   * - Siano Stellar Digital Receiver ROM
+     - 187f:0010
+   * - Siano Vega Digital Receiver
+     - 187f:0300
+   * - Siano Venice Digital Receiver
+     - 187f:0301, 187f:0301, 187f:0302
+   * - ZTE Data Card Digital Receiver
+     - 19D2:0086
diff --git a/Documentation/admin-guide/media/technisat.rst b/Documentation/admin-guide/media/technisat.rst
new file mode 100644
index 000000000000..9eaa12366bbf
--- /dev/null
+++ b/Documentation/admin-guide/media/technisat.rst
@@ -0,0 +1,100 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+How to set up the Technisat/B2C2 Flexcop devices
+================================================
+
+.. note::
+
+   This documentation is outdated.
+
+Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009
+
+Find out what device you have
+-----------------------------
+
+Important Notice: The driver does NOT support Technisat USB 2 devices!
+
+First start your linux box with a shipped kernel:
+
+.. code-block:: none
+
+	lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example:
+	02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
+	Technisat SkyStar2 DVB card (rev 02)
+
+	dmesg | grep frontend may show you for example:
+	DVB: registering frontend 0 (Conexant CX24123/CX24109)...
+
+Kernel compilation:
+-------------------
+
+If the Flexcop / Technisat is the only DVB / TV / Radio device in your box
+get rid of unnecessary modules and check this one:
+
+``Multimedia support`` => ``Customise analog and hybrid tuner modules to build``
+
+In this directory uncheck every driver which is activated there
+(except ``Simple tuner support`` for ATSC 3rd generation only -> see case 9 please).
+
+Then please activate:
+
+- Main module part:
+
+  ``Multimedia support`` => ``DVB/ATSC adapters`` => ``Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters``
+
+  #) => ``Technisat/B2C2 Air/Sky/Cable2PC PCI`` (PCI card) or
+  #) => ``Technisat/B2C2 Air/Sky/Cable2PC USB`` (USB 1.1 adapter)
+     and for troubleshooting purposes:
+  #) => ``Enable debug for the B2C2 FlexCop drivers``
+
+- Frontend / Tuner / Demodulator module part:
+
+  ``Multimedia support`` => ``DVB/ATSC adapters``
+   => ``Customise the frontend modules to build`` ``Customise DVB frontends`` =>
+
+  - SkyStar DVB-S Revision 2.3:
+
+    #) => ``Zarlink VP310/MT312/ZL10313 based``
+    #) => ``Generic I2C PLL based tuners``
+
+  - SkyStar DVB-S Revision 2.6:
+
+    #) => ``ST STV0299 based``
+    #) => ``Generic I2C PLL based tuners``
+
+  - SkyStar DVB-S Revision 2.7:
+
+    #) => ``Samsung S5H1420 based``
+    #) => ``Integrant ITD1000 Zero IF tuner for DVB-S/DSS``
+    #) => ``ISL6421 SEC controller``
+
+  - SkyStar DVB-S Revision 2.8:
+
+    #) => ``Conexant CX24123 based``
+    #) => ``Conexant CX24113/CX24128 tuner for DVB-S/DSS``
+    #) => ``ISL6421 SEC controller``
+
+  - AirStar DVB-T card:
+
+    #) => ``Zarlink MT352 based``
+    #) => ``Generic I2C PLL based tuners``
+
+  - CableStar DVB-C card:
+
+    #) => ``ST STV0297 based``
+    #) => ``Generic I2C PLL based tuners``
+
+  - AirStar ATSC card 1st generation:
+
+    #) => ``Broadcom BCM3510``
+
+  - AirStar ATSC card 2nd generation:
+
+    #) => ``NxtWave Communications NXT2002/NXT2004 based``
+    #) => ``Generic I2C PLL based tuners``
+
+  - AirStar ATSC card 3rd generation:
+
+    #) => ``LG Electronics LGDT3302/LGDT3303 based``
+    #) ``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` => ``Simple tuner support``
+
diff --git a/Documentation/admin-guide/media/tm6000-cardlist.rst b/Documentation/admin-guide/media/tm6000-cardlist.rst
new file mode 100644
index 000000000000..6d2769c0f4d8
--- /dev/null
+++ b/Documentation/admin-guide/media/tm6000-cardlist.rst
@@ -0,0 +1,83 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+TM6000 cards list
+=================
+
+.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - USB IDs
+
+   * - 0
+     - Unknown tm6000 video grabber
+     -
+
+   * - 1
+     - Generic tm5600 board
+     - 6000:0001
+
+   * - 2
+     - Generic tm6000 board
+     -
+
+   * - 3
+     - Generic tm6010 board
+     - 6000:0002
+
+   * - 4
+     - 10Moons UT 821
+     -
+
+   * - 5
+     - 10Moons UT 330
+     -
+
+   * - 6
+     - ADSTECH Dual TV USB
+     - 06e1:f332
+
+   * - 7
+     - Freecom Hybrid Stick / Moka DVB-T Receiver Dual
+     - 14aa:0620
+
+   * - 8
+     - ADSTECH Mini Dual TV USB
+     - 06e1:b339
+
+   * - 9
+     - Hauppauge WinTV HVR-900H / WinTV USB2-Stick
+     - 2040:6600, 2040:6601, 2040:6610, 2040:6611
+
+   * - 10
+     - Beholder Wander DVB-T/TV/FM USB2.0
+     - 6000:dec0
+
+   * - 11
+     - Beholder Voyager TV/FM USB2.0
+     - 6000:dec1
+
+   * - 12
+     - Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick
+     - 0ccd:0086, 0ccd:00A5
+
+   * - 13
+     - Twinhan TU501(704D1)
+     - 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264
+
+   * - 14
+     - Beholder Wander Lite DVB-T/TV/FM USB2.0
+     - 6000:dec2
+
+   * - 15
+     - Beholder Voyager Lite TV/FM USB2.0
+     - 6000:dec3
+
+   * - 16
+     - Terratec Grabster AV 150/250 MX
+     - 0ccd:0079
diff --git a/Documentation/admin-guide/media/ttusb-dec.rst b/Documentation/admin-guide/media/ttusb-dec.rst
new file mode 100644
index 000000000000..516bbab8a872
--- /dev/null
+++ b/Documentation/admin-guide/media/ttusb-dec.rst
@@ -0,0 +1,45 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+TechnoTrend/Hauppauge DEC USB Driver
+====================================
+
+Driver Status
+-------------
+
+Supported:
+
+	- DEC2000-t
+	- DEC2450-t
+	- DEC3000-s
+	- Video Streaming
+	- Audio Streaming
+	- Section Filters
+	- Channel Zapping
+	- Hotplug firmware loader
+
+To Do:
+
+	- Tuner status information
+	- DVB network interface
+	- Streaming video PC->DEC
+	- Conax support for 2450-t
+
+Getting the Firmware
+--------------------
+To download the firmware, use the following commands:
+
+.. code-block:: none
+
+	scripts/get_dvb_firmware dec2000t
+	scripts/get_dvb_firmware dec2540t
+	scripts/get_dvb_firmware dec3000s
+
+
+Hotplug Firmware Loading
+------------------------
+
+Since 2.6 kernels, the firmware is loaded at the point that the driver module
+is loaded.
+
+Copy the three files downloaded above into the /usr/lib/hotplug/firmware or
+/lib/firmware directory (depending on configuration of firmware hotplug).
diff --git a/Documentation/admin-guide/media/tuner-cardlist.rst b/Documentation/admin-guide/media/tuner-cardlist.rst
new file mode 100644
index 000000000000..362617c59c5d
--- /dev/null
+++ b/Documentation/admin-guide/media/tuner-cardlist.rst
@@ -0,0 +1,100 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Tuner cards list
+================
+
+============ =====================================================
+Tuner number Card name
+============ =====================================================
+0            Temic PAL (4002 FH5)
+1            Philips PAL_I (FI1246 and compatibles)
+2            Philips NTSC (FI1236,FM1236 and compatibles)
+3            Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)
+4            NoTuner
+5            Philips PAL_BG (FI1216 and compatibles)
+6            Temic NTSC (4032 FY5)
+7            Temic PAL_I (4062 FY5)
+8            Temic NTSC (4036 FY5)
+9            Alps HSBH1
+10           Alps TSBE1
+11           Alps TSBB5
+12           Alps TSBE5
+13           Alps TSBC5
+14           Temic PAL_BG (4006FH5)
+15           Alps TSCH6
+16           Temic PAL_DK (4016 FY5)
+17           Philips NTSC_M (MK2)
+18           Temic PAL_I (4066 FY5)
+19           Temic PAL* auto (4006 FN5)
+20           Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)
+21           Temic NTSC (4039 FR5)
+22           Temic PAL/SECAM multi (4046 FM5)
+23           Philips PAL_DK (FI1256 and compatibles)
+24           Philips PAL/SECAM multi (FQ1216ME)
+25           LG PAL_I+FM (TAPC-I001D)
+26           LG PAL_I (TAPC-I701D)
+27           LG NTSC+FM (TPI8NSR01F)
+28           LG PAL_BG+FM (TPI8PSB01D)
+29           LG PAL_BG (TPI8PSB11D)
+30           Temic PAL* auto + FM (4009 FN5)
+31           SHARP NTSC_JP (2U5JF5540)
+32           Samsung PAL TCPM9091PD27
+33           MT20xx universal
+34           Temic PAL_BG (4106 FH5)
+35           Temic PAL_DK/SECAM_L (4012 FY5)
+36           Temic NTSC (4136 FY5)
+37           LG PAL (newer TAPC series)
+38           Philips PAL/SECAM multi (FM1216ME MK3)
+39           LG NTSC (newer TAPC series)
+40           HITACHI V7-J180AT
+41           Philips PAL_MK (FI1216 MK)
+42           Philips FCV1236D ATSC/NTSC dual in
+43           Philips NTSC MK3 (FM1236MK3 or FM1236/F)
+44           Philips 4 in 1 (ATI TV Wonder Pro/Conexant)
+45           Microtune 4049 FM5
+46           Panasonic VP27s/ENGE4324D
+47           LG NTSC (TAPE series)
+48           Tenna TNF 8831 BGFF)
+49           Microtune 4042 FI5 ATSC/NTSC dual in
+50           TCL 2002N
+51           Philips PAL/SECAM_D (FM 1256 I-H3)
+52           Thomson DTT 7610 (ATSC/NTSC)
+53           Philips FQ1286
+54           Philips/NXP TDA 8290/8295 + 8275/8275A/18271
+55           TCL 2002MB
+56           Philips PAL/SECAM multi (FQ1216AME MK4)
+57           Philips FQ1236A MK4
+58           Ymec TVision TVF-8531MF/8831MF/8731MF
+59           Ymec TVision TVF-5533MF
+60           Thomson DTT 761X (ATSC/NTSC)
+61           Tena TNF9533-D/IF/TNF9533-B/DF
+62           Philips TEA5767HN FM Radio
+63           Philips FMD1216ME MK3 Hybrid Tuner
+64           LG TDVS-H06xF
+65           Ymec TVF66T5-B/DFF
+66           LG TALN series
+67           Philips TD1316 Hybrid Tuner
+68           Philips TUV1236D ATSC/NTSC dual in
+69           Tena TNF 5335 and similar models
+70           Samsung TCPN 2121P30A
+71           Xceive xc2028/xc3028 tuner
+72           Thomson FE6600
+73           Samsung TCPG 6121P30A
+75           Philips TEA5761 FM Radio
+76           Xceive 5000 tuner
+77           TCL tuner MF02GIP-5N-E
+78           Philips FMD1216MEX MK3 Hybrid Tuner
+79           Philips PAL/SECAM multi (FM1216 MK5)
+80           Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough
+81           Partsnic (Daewoo) PTI-5NF05
+82           Philips CU1216L
+83           NXP TDA18271
+84           Sony BTF-Pxn01Z
+85           Philips FQ1236 MK5
+86           Tena TNF5337 MFD
+87           Xceive 4000 tuner
+88           Xceive 5000C tuner
+89           Sony BTF-PG472Z PAL/SECAM
+90           Sony BTF-PK467Z NTSC-M-JP
+91           Sony BTF-PB463Z NTSC-M
+============ =====================================================
diff --git a/Documentation/admin-guide/media/usbvision-cardlist.rst b/Documentation/admin-guide/media/usbvision-cardlist.rst
new file mode 100644
index 000000000000..6aee115ee6e2
--- /dev/null
+++ b/Documentation/admin-guide/media/usbvision-cardlist.rst
@@ -0,0 +1,283 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+USBvision cards list
+====================
+
+.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - USB IDs
+
+   * - 0
+     - Xanboo
+     - 0a6f:0400
+
+   * - 1
+     - Belkin USB VideoBus II Adapter
+     - 050d:0106
+
+   * - 2
+     - Belkin Components USB VideoBus
+     - 050d:0207
+
+   * - 3
+     - Belkin USB VideoBus II
+     - 050d:0208
+
+   * - 4
+     - echoFX InterView Lite
+     - 0571:0002
+
+   * - 5
+     - USBGear USBG-V1 resp. HAMA USB
+     - 0573:0003
+
+   * - 6
+     - D-Link V100
+     - 0573:0400
+
+   * - 7
+     - X10 USB Camera
+     - 0573:2000
+
+   * - 8
+     - Hauppauge WinTV USB Live (PAL B/G)
+     - 0573:2d00
+
+   * - 9
+     - Hauppauge WinTV USB Live Pro (NTSC M/N)
+     - 0573:2d01
+
+   * - 10
+     - Zoran Co. PMD (Nogatech) AV-grabber Manhattan
+     - 0573:2101
+
+   * - 11
+     - Nogatech USB-TV (NTSC) FM
+     - 0573:4100
+
+   * - 12
+     - PNY USB-TV (NTSC) FM
+     - 0573:4110
+
+   * - 13
+     - PixelView PlayTv-USB PRO (PAL) FM
+     - 0573:4450
+
+   * - 14
+     - ZTV ZT-721 2.4GHz USB A/V Receiver
+     - 0573:4550
+
+   * - 15
+     - Hauppauge WinTV USB (NTSC M/N)
+     - 0573:4d00
+
+   * - 16
+     - Hauppauge WinTV USB (PAL B/G)
+     - 0573:4d01
+
+   * - 17
+     - Hauppauge WinTV USB (PAL I)
+     - 0573:4d02
+
+   * - 18
+     - Hauppauge WinTV USB (PAL/SECAM L)
+     - 0573:4d03
+
+   * - 19
+     - Hauppauge WinTV USB (PAL D/K)
+     - 0573:4d04
+
+   * - 20
+     - Hauppauge WinTV USB (NTSC FM)
+     - 0573:4d10
+
+   * - 21
+     - Hauppauge WinTV USB (PAL B/G FM)
+     - 0573:4d11
+
+   * - 22
+     - Hauppauge WinTV USB (PAL I FM)
+     - 0573:4d12
+
+   * - 23
+     - Hauppauge WinTV USB (PAL D/K FM)
+     - 0573:4d14
+
+   * - 24
+     - Hauppauge WinTV USB Pro (NTSC M/N)
+     - 0573:4d2a
+
+   * - 25
+     - Hauppauge WinTV USB Pro (NTSC M/N) V2
+     - 0573:4d2b
+
+   * - 26
+     - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L)
+     - 0573:4d2c
+
+   * - 27
+     - Hauppauge WinTV USB Pro (NTSC M/N) V3
+     - 0573:4d20
+
+   * - 28
+     - Hauppauge WinTV USB Pro (PAL B/G)
+     - 0573:4d21
+
+   * - 29
+     - Hauppauge WinTV USB Pro (PAL I)
+     - 0573:4d22
+
+   * - 30
+     - Hauppauge WinTV USB Pro (PAL/SECAM L)
+     - 0573:4d23
+
+   * - 31
+     - Hauppauge WinTV USB Pro (PAL D/K)
+     - 0573:4d24
+
+   * - 32
+     - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L)
+     - 0573:4d25
+
+   * - 33
+     - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2
+     - 0573:4d26
+
+   * - 34
+     - Hauppauge WinTV USB Pro (PAL B/G) V2
+     - 0573:4d27
+
+   * - 35
+     - Hauppauge WinTV USB Pro (PAL B/G,D/K)
+     - 0573:4d28
+
+   * - 36
+     - Hauppauge WinTV USB Pro (PAL I,D/K)
+     - 0573:4d29
+
+   * - 37
+     - Hauppauge WinTV USB Pro (NTSC M/N FM)
+     - 0573:4d30
+
+   * - 38
+     - Hauppauge WinTV USB Pro (PAL B/G FM)
+     - 0573:4d31
+
+   * - 39
+     - Hauppauge WinTV USB Pro (PAL I FM)
+     - 0573:4d32
+
+   * - 40
+     - Hauppauge WinTV USB Pro (PAL D/K FM)
+     - 0573:4d34
+
+   * - 41
+     - Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM)
+     - 0573:4d35
+
+   * - 42
+     - Hauppauge WinTV USB Pro (Temic PAL B/G FM)
+     - 0573:4d36
+
+   * - 43
+     - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM)
+     - 0573:4d37
+
+   * - 44
+     - Hauppauge WinTV USB Pro (NTSC M/N FM) V2
+     - 0573:4d38
+
+   * - 45
+     - Camtel Technology USB TV Genie Pro FM Model TVB330
+     - 0768:0006
+
+   * - 46
+     - Digital Video Creator I
+     - 07d0:0001
+
+   * - 47
+     - Global Village GV-007 (NTSC)
+     - 07d0:0002
+
+   * - 48
+     - Dazzle Fusion Model DVC-50 Rev 1 (NTSC)
+     - 07d0:0003
+
+   * - 49
+     - Dazzle Fusion Model DVC-80 Rev 1 (PAL)
+     - 07d0:0004
+
+   * - 50
+     - Dazzle Fusion Model DVC-90 Rev 1 (SECAM)
+     - 07d0:0005
+
+   * - 51
+     - Eskape Labs MyTV2Go
+     - 07f8:9104
+
+   * - 52
+     - Pinnacle Studio PCTV USB (PAL)
+     - 2304:010d
+
+   * - 53
+     - Pinnacle Studio PCTV USB (SECAM)
+     - 2304:0109
+
+   * - 54
+     - Pinnacle Studio PCTV USB (PAL) FM
+     - 2304:0110
+
+   * - 55
+     - Miro PCTV USB
+     - 2304:0111
+
+   * - 56
+     - Pinnacle Studio PCTV USB (NTSC) FM
+     - 2304:0112
+
+   * - 57
+     - Pinnacle Studio PCTV USB (PAL) FM V2
+     - 2304:0210
+
+   * - 58
+     - Pinnacle Studio PCTV USB (NTSC) FM V2
+     - 2304:0212
+
+   * - 59
+     - Pinnacle Studio PCTV USB (PAL) FM V3
+     - 2304:0214
+
+   * - 60
+     - Pinnacle Studio Linx Video input cable (NTSC)
+     - 2304:0300
+
+   * - 61
+     - Pinnacle Studio Linx Video input cable (PAL)
+     - 2304:0301
+
+   * - 62
+     - Pinnacle PCTV Bungee USB (PAL) FM
+     - 2304:0419
+
+   * - 63
+     - Hauppauge WinTv-USB
+     - 2400:4200
+
+   * - 64
+     - Pinnacle Studio PCTV USB (NTSC) FM V3
+     - 2304:0113
+
+   * - 65
+     - Nogatech USB MicroCam NTSC (NV3000N)
+     - 0573:3000
+
+   * - 66
+     - Nogatech USB MicroCam PAL (NV3001P)
+     - 0573:3001
diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
new file mode 100644
index 000000000000..251cc4ede0b6
--- /dev/null
+++ b/Documentation/admin-guide/media/v4l-drivers.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _uapi-v4l-drivers:
+
+===============================================
+Video4Linux (V4L) driver-specific documentation
+===============================================
+
+.. toctree::
+	:maxdepth: 2
+
+	bttv
+	cafe_ccic
+	cpia2
+	cx88
+	davinci-vpbe
+	fimc
+	imx
+	imx7
+	ipu3
+	ivtv
+	meye
+	omap3isp
+	omap4_camera
+	philips
+	qcom_camss
+	rcar-fdp1
+	saa7134
+	si470x
+	si4713
+	si476x
+	vimc
+	vivid
diff --git a/Documentation/admin-guide/media/vimc.dot b/Documentation/admin-guide/media/vimc.dot
new file mode 100644
index 000000000000..57863a13fa39
--- /dev/null
+++ b/Documentation/admin-guide/media/vimc.dot
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port0 -> n00000005:port0 [style=bold]
+	n00000001:port0 -> n0000000b [style=bold]
+	n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000003:port0 -> n00000008:port0 [style=bold]
+	n00000003:port0 -> n0000000f [style=bold]
+	n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000005:port1 -> n00000017:port0
+	n00000008 [label="{{<port0> 0} | Debayer B\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000008:port1 -> n00000017:port0 [style=dashed]
+	n0000000b [label="Raw Capture 0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n0000000f [label="Raw Capture 1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n00000013 [label="RGB/YUV Input\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+	n00000013 -> n00000017:port0 [style=dashed]
+	n00000017 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000017:port1 -> n0000001a [style=bold]
+	n0000001a [label="RGB/YUV Capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+}
diff --git a/Documentation/admin-guide/media/vimc.rst b/Documentation/admin-guide/media/vimc.rst
new file mode 100644
index 000000000000..211cc8972410
--- /dev/null
+++ b/Documentation/admin-guide/media/vimc.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual Media Controller Driver (vimc)
+==========================================
+
+The vimc driver emulates complex video hardware using the V4L2 API and the Media
+API. It has a capture device and three subdevices: sensor, debayer and scaler.
+
+Topology
+--------
+
+The topology is hardcoded, although you could modify it in vimc-core and
+recompile the driver to achieve your own topology. This is the default topology:
+
+.. _vimc_topology_graph:
+
+.. kernel-figure:: vimc.dot
+    :alt:   Diagram of the default media pipeline topology
+    :align: center
+
+    Media pipeline graph on vimc
+
+Configuring the topology
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Each subdevice will come with its default configuration (pixelformat, height,
+width, ...). One needs to configure the topology in order to match the
+configuration on each linked subdevice to stream frames through the pipeline.
+If the configuration doesn't match, the stream will fail. The ``v4l-utils``
+package is a bundle of user-space applications, that comes with ``media-ctl`` and
+``v4l2-ctl`` that can be used to configure the vimc configuration. This sequence
+of commands fits for the default topology:
+
+.. code-block:: bash
+
+        media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
+        v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
+        v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
+        v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
+
+Subdevices
+----------
+
+Subdevices define the behavior of an entity in the topology. Depending on the
+subdevice, the entity can have multiple pads of type source or sink.
+
+vimc-sensor:
+	Generates images in several formats using video test pattern generator.
+	Exposes:
+
+	* 1 Pad source
+
+vimc-debayer:
+	Transforms images in bayer format into a non-bayer format.
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+vimc-scaler:
+	Scale up the image by a factor of 3. E.g.: a 640x480 image becomes a
+        1920x1440 image. (this value can be configured, see at
+        `Module options`_).
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+vimc-capture:
+	Exposes node /dev/videoX to allow userspace to capture the stream.
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+
+Module options
+--------------
+
+Vimc has a module parameter to configure the driver.
+
+* ``sca_mult=<unsigned int>``
+
+        Image size multiplier factor to be used to multiply both width and
+        height, so the image size will be ``sca_mult^2`` bigger than the
+        original one. Currently, only supports scaling up (the default value
+        is 3).
diff --git a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst
new file mode 100644
index 000000000000..52e57b773f07
--- /dev/null
+++ b/Documentation/admin-guide/media/vivid.rst
@@ -0,0 +1,1393 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual Video Test Driver (vivid)
+=====================================
+
+This driver emulates video4linux hardware of various types: video capture, video
+output, vbi capture and output, metadata capture and output, radio receivers and
+transmitters, touch capture and a software defined radio receiver. In addition a
+simple framebuffer device is available for testing capture and output overlays.
+
+Up to 64 vivid instances can be created, each with up to 16 inputs and 16 outputs.
+
+Each input can be a webcam, TV capture device, S-Video capture device or an HDMI
+capture device. Each output can be an S-Video output device or an HDMI output
+device.
+
+These inputs and outputs act exactly as a real hardware device would behave. This
+allows you to use this driver as a test input for application development, since
+you can test the various features without requiring special hardware.
+
+This document describes the features implemented by this driver:
+
+- Support for read()/write(), MMAP, USERPTR and DMABUF streaming I/O.
+- A large list of test patterns and variations thereof
+- Working brightness, contrast, saturation and hue controls
+- Support for the alpha color component
+- Full colorspace support, including limited/full RGB range
+- All possible control types are present
+- Support for various pixel aspect ratios and video aspect ratios
+- Error injection to test what happens if errors occur
+- Supports crop/compose/scale in any combination for both input and output
+- Can emulate up to 4K resolutions
+- All Field settings are supported for testing interlaced capturing
+- Supports all standard YUV and RGB formats, including two multiplanar YUV formats
+- Raw and Sliced VBI capture and output support
+- Radio receiver and transmitter support, including RDS support
+- Software defined radio (SDR) support
+- Capture and output overlay support
+- Metadata capture and output support
+- Touch capture support
+
+These features will be described in more detail below.
+
+Configuring the driver
+----------------------
+
+By default the driver will create a single instance that has a video capture
+device with webcam, TV, S-Video and HDMI inputs, a video output device with
+S-Video and HDMI outputs, one vbi capture device, one vbi output device, one
+radio receiver device, one radio transmitter device and one SDR device.
+
+The number of instances, devices, video inputs and outputs and their types are
+all configurable using the following module options:
+
+- n_devs:
+
+	number of driver instances to create. By default set to 1. Up to 64
+	instances can be created.
+
+- node_types:
+
+	which devices should each driver instance create. An array of
+	hexadecimal values, one for each instance. The default is 0x1d3d.
+	Each value is a bitmask with the following meaning:
+
+		- bit 0: Video Capture node
+		- bit 2-3: VBI Capture node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both
+		- bit 4: Radio Receiver node
+		- bit 5: Software Defined Radio Receiver node
+		- bit 8: Video Output node
+		- bit 10-11: VBI Output node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both
+		- bit 12: Radio Transmitter node
+		- bit 16: Framebuffer for testing overlays
+		- bit 17: Metadata Capture node
+		- bit 18: Metadata Output node
+		- bit 19: Touch Capture node
+
+	So to create four instances, the first two with just one video capture
+	device, the second two with just one video output device you would pass
+	these module options to vivid:
+
+	.. code-block:: none
+
+		n_devs=4 node_types=0x1,0x1,0x100,0x100
+
+- num_inputs:
+
+	the number of inputs, one for each instance. By default 4 inputs
+	are created for each video capture device. At most 16 inputs can be created,
+	and there must be at least one.
+
+- input_types:
+
+	the input types for each instance, the default is 0xe4. This defines
+	what the type of each input is when the inputs are created for each driver
+	instance. This is a hexadecimal value with up to 16 pairs of bits, each
+	pair gives the type and bits 0-1 map to input 0, bits 2-3 map to input 1,
+	30-31 map to input 15. Each pair of bits has the following meaning:
+
+		- 00: this is a webcam input
+		- 01: this is a TV tuner input
+		- 10: this is an S-Video input
+		- 11: this is an HDMI input
+
+	So to create a video capture device with 8 inputs where input 0 is a TV
+	tuner, inputs 1-3 are S-Video inputs and inputs 4-7 are HDMI inputs you
+	would use the following module options:
+
+	.. code-block:: none
+
+		num_inputs=8 input_types=0xffa9
+
+- num_outputs:
+
+	the number of outputs, one for each instance. By default 2 outputs
+	are created for each video output device. At most 16 outputs can be
+	created, and there must be at least one.
+
+- output_types:
+
+	the output types for each instance, the default is 0x02. This defines
+	what the type of each output is when the outputs are created for each
+	driver instance. This is a hexadecimal value with up to 16 bits, each bit
+	gives the type and bit 0 maps to output 0, bit 1 maps to output 1, bit
+	15 maps to output 15. The meaning of each bit is as follows:
+
+		- 0: this is an S-Video output
+		- 1: this is an HDMI output
+
+	So to create a video output device with 8 outputs where outputs 0-3 are
+	S-Video outputs and outputs 4-7 are HDMI outputs you would use the
+	following module options:
+
+	.. code-block:: none
+
+		num_outputs=8 output_types=0xf0
+
+- vid_cap_nr:
+
+	give the desired videoX start number for each video capture device.
+	The default is -1 which will just take the first free number. This allows
+	you to map capture video nodes to specific videoX device nodes. Example:
+
+	.. code-block:: none
+
+		n_devs=4 vid_cap_nr=2,4,6,8
+
+	This will attempt to assign /dev/video2 for the video capture device of
+	the first vivid instance, video4 for the next up to video8 for the last
+	instance. If it can't succeed, then it will just take the next free
+	number.
+
+- vid_out_nr:
+
+	give the desired videoX start number for each video output device.
+	The default is -1 which will just take the first free number.
+
+- vbi_cap_nr:
+
+	give the desired vbiX start number for each vbi capture device.
+	The default is -1 which will just take the first free number.
+
+- vbi_out_nr:
+
+	give the desired vbiX start number for each vbi output device.
+	The default is -1 which will just take the first free number.
+
+- radio_rx_nr:
+
+	give the desired radioX start number for each radio receiver device.
+	The default is -1 which will just take the first free number.
+
+- radio_tx_nr:
+
+	give the desired radioX start number for each radio transmitter
+	device. The default is -1 which will just take the first free number.
+
+- sdr_cap_nr:
+
+	give the desired swradioX start number for each SDR capture device.
+	The default is -1 which will just take the first free number.
+
+- meta_cap_nr:
+
+        give the desired videoX start number for each metadata capture device.
+        The default is -1 which will just take the first free number.
+
+- meta_out_nr:
+
+        give the desired videoX start number for each metadata output device.
+        The default is -1 which will just take the first free number.
+
+- touch_cap_nr:
+
+        give the desired v4l-touchX start number for each touch capture device.
+        The default is -1 which will just take the first free number.
+
+- ccs_cap_mode:
+
+	specify the allowed video capture crop/compose/scaling combination
+	for each driver instance. Video capture devices can have any combination
+	of cropping, composing and scaling capabilities and this will tell the
+	vivid driver which of those is should emulate. By default the user can
+	select this through controls.
+
+	The value is either -1 (controlled by the user) or a set of three bits,
+	each enabling (1) or disabling (0) one of the features:
+
+	- bit 0:
+
+		Enable crop support. Cropping will take only part of the
+		incoming picture.
+	- bit 1:
+
+		Enable compose support. Composing will copy the incoming
+		picture into a larger buffer.
+
+	- bit 2:
+
+		Enable scaling support. Scaling can scale the incoming
+		picture. The scaler of the vivid driver can enlarge up
+		or down to four times the original size. The scaler is
+		very simple and low-quality. Simplicity and speed were
+		key, not quality.
+
+	Note that this value is ignored by webcam inputs: those enumerate
+	discrete framesizes and that is incompatible with cropping, composing
+	or scaling.
+
+- ccs_out_mode:
+
+	specify the allowed video output crop/compose/scaling combination
+	for each driver instance. Video output devices can have any combination
+	of cropping, composing and scaling capabilities and this will tell the
+	vivid driver which of those is should emulate. By default the user can
+	select this through controls.
+
+	The value is either -1 (controlled by the user) or a set of three bits,
+	each enabling (1) or disabling (0) one of the features:
+
+	- bit 0:
+
+		Enable crop support. Cropping will take only part of the
+		outgoing buffer.
+
+	- bit 1:
+
+		Enable compose support. Composing will copy the incoming
+		buffer into a larger picture frame.
+
+	- bit 2:
+
+		Enable scaling support. Scaling can scale the incoming
+		buffer. The scaler of the vivid driver can enlarge up
+		or down to four times the original size. The scaler is
+		very simple and low-quality. Simplicity and speed were
+		key, not quality.
+
+- multiplanar:
+
+	select whether each device instance supports multi-planar formats,
+	and thus the V4L2 multi-planar API. By default device instances are
+	single-planar.
+
+	This module option can override that for each instance. Values are:
+
+		- 1: this is a single-planar instance.
+		- 2: this is a multi-planar instance.
+
+- vivid_debug:
+
+	enable driver debugging info
+
+- no_error_inj:
+
+	if set disable the error injecting controls. This option is
+	needed in order to run a tool like v4l2-compliance. Tools like that
+	exercise all controls including a control like 'Disconnect' which
+	emulates a USB disconnect, making the device inaccessible and so
+	all tests that v4l2-compliance is doing will fail afterwards.
+
+	There may be other situations as well where you want to disable the
+	error injection support of vivid. When this option is set, then the
+	controls that select crop, compose and scale behavior are also
+	removed. Unless overridden by ccs_cap_mode and/or ccs_out_mode the
+	will default to enabling crop, compose and scaling.
+
+- allocators:
+
+	memory allocator selection, default is 0. It specifies the way buffers
+	will be allocated.
+
+		- 0: vmalloc
+		- 1: dma-contig
+
+Taken together, all these module options allow you to precisely customize
+the driver behavior and test your application with all sorts of permutations.
+It is also very suitable to emulate hardware that is not yet available, e.g.
+when developing software for a new upcoming device.
+
+
+Video Capture
+-------------
+
+This is probably the most frequently used feature. The video capture device
+can be configured by using the module options num_inputs, input_types and
+ccs_cap_mode (see section 1 for more detailed information), but by default
+four inputs are configured: a webcam, a TV tuner, an S-Video and an HDMI
+input, one input for each input type. Those are described in more detail
+below.
+
+Special attention has been given to the rate at which new frames become
+available. The jitter will be around 1 jiffie (that depends on the HZ
+configuration of your kernel, so usually 1/100, 1/250 or 1/1000 of a second),
+but the long-term behavior is exactly following the framerate. So a
+framerate of 59.94 Hz is really different from 60 Hz. If the framerate
+exceeds your kernel's HZ value, then you will get dropped frames, but the
+frame/field sequence counting will keep track of that so the sequence
+count will skip whenever frames are dropped.
+
+
+Webcam Input
+~~~~~~~~~~~~
+
+The webcam input supports three framesizes: 320x180, 640x360 and 1280x720. It
+supports frames per second settings of 10, 15, 25, 30, 50 and 60 fps. Which ones
+are available depends on the chosen framesize: the larger the framesize, the
+lower the maximum frames per second.
+
+The initially selected colorspace when you switch to the webcam input will be
+sRGB.
+
+
+TV and S-Video Inputs
+~~~~~~~~~~~~~~~~~~~~~
+
+The only difference between the TV and S-Video input is that the TV has a
+tuner. Otherwise they behave identically.
+
+These inputs support audio inputs as well: one TV and one Line-In. They
+both support all TV standards. If the standard is queried, then the Vivid
+controls 'Standard Signal Mode' and 'Standard' determine what
+the result will be.
+
+These inputs support all combinations of the field setting. Special care has
+been taken to faithfully reproduce how fields are handled for the different
+TV standards. This is particularly noticeable when generating a horizontally
+moving image so the temporal effect of using interlaced formats becomes clearly
+visible. For 50 Hz standards the top field is the oldest and the bottom field
+is the newest in time. For 60 Hz standards that is reversed: the bottom field
+is the oldest and the top field is the newest in time.
+
+When you start capturing in V4L2_FIELD_ALTERNATE mode the first buffer will
+contain the top field for 50 Hz standards and the bottom field for 60 Hz
+standards. This is what capture hardware does as well.
+
+Finally, for PAL/SECAM standards the first half of the top line contains noise.
+This simulates the Wide Screen Signal that is commonly placed there.
+
+The initially selected colorspace when you switch to the TV or S-Video input
+will be SMPTE-170M.
+
+The pixel aspect ratio will depend on the TV standard. The video aspect ratio
+can be selected through the 'Standard Aspect Ratio' Vivid control.
+Choices are '4x3', '16x9' which will give letterboxed widescreen video and
+'16x9 Anamorphic' which will give full screen squashed anamorphic widescreen
+video that will need to be scaled accordingly.
+
+The TV 'tuner' supports a frequency range of 44-958 MHz. Channels are available
+every 6 MHz, starting from 49.25 MHz. For each channel the generated image
+will be in color for the +/- 0.25 MHz around it, and in grayscale for
++/- 1 MHz around the channel. Beyond that it is just noise. The VIDIOC_G_TUNER
+ioctl will return 100% signal strength for +/- 0.25 MHz and 50% for +/- 1 MHz.
+It will also return correct afc values to show whether the frequency is too
+low or too high.
+
+The audio subchannels that are returned are MONO for the +/- 1 MHz range around
+a valid channel frequency. When the frequency is within +/- 0.25 MHz of the
+channel it will return either MONO, STEREO, either MONO | SAP (for NTSC) or
+LANG1 | LANG2 (for others), or STEREO | SAP.
+
+Which one is returned depends on the chosen channel, each next valid channel
+will cycle through the possible audio subchannel combinations. This allows
+you to test the various combinations by just switching channels..
+
+Finally, for these inputs the v4l2_timecode struct is filled in in the
+dequeued v4l2_buffer struct.
+
+
+HDMI Input
+~~~~~~~~~~
+
+The HDMI inputs supports all CEA-861 and DMT timings, both progressive and
+interlaced, for pixelclock frequencies between 25 and 600 MHz. The field
+mode for interlaced formats is always V4L2_FIELD_ALTERNATE. For HDMI the
+field order is always top field first, and when you start capturing an
+interlaced format you will receive the top field first.
+
+The initially selected colorspace when you switch to the HDMI input or
+select an HDMI timing is based on the format resolution: for resolutions
+less than or equal to 720x576 the colorspace is set to SMPTE-170M, for
+others it is set to REC-709 (CEA-861 timings) or sRGB (VESA DMT timings).
+
+The pixel aspect ratio will depend on the HDMI timing: for 720x480 is it
+set as for the NTSC TV standard, for 720x576 it is set as for the PAL TV
+standard, and for all others a 1:1 pixel aspect ratio is returned.
+
+The video aspect ratio can be selected through the 'DV Timings Aspect Ratio'
+Vivid control. Choices are 'Source Width x Height' (just use the
+same ratio as the chosen format), '4x3' or '16x9', either of which can
+result in pillarboxed or letterboxed video.
+
+For HDMI inputs it is possible to set the EDID. By default a simple EDID
+is provided. You can only set the EDID for HDMI inputs. Internally, however,
+the EDID is shared between all HDMI inputs.
+
+No interpretation is done of the EDID data with the exception of the
+physical address. See the CEC section for more details.
+
+There is a maximum of 15 HDMI inputs (if there are more, then they will be
+reduced to 15) since that's the limitation of the EDID physical address.
+
+
+Video Output
+------------
+
+The video output device can be configured by using the module options
+num_outputs, output_types and ccs_out_mode (see section 1 for more detailed
+information), but by default two outputs are configured: an S-Video and an
+HDMI input, one output for each output type. Those are described in more detail
+below.
+
+Like with video capture the framerate is also exact in the long term.
+
+
+S-Video Output
+~~~~~~~~~~~~~~
+
+This output supports audio outputs as well: "Line-Out 1" and "Line-Out 2".
+The S-Video output supports all TV standards.
+
+This output supports all combinations of the field setting.
+
+The initially selected colorspace when you switch to the TV or S-Video input
+will be SMPTE-170M.
+
+
+HDMI Output
+~~~~~~~~~~~
+
+The HDMI output supports all CEA-861 and DMT timings, both progressive and
+interlaced, for pixelclock frequencies between 25 and 600 MHz. The field
+mode for interlaced formats is always V4L2_FIELD_ALTERNATE.
+
+The initially selected colorspace when you switch to the HDMI output or
+select an HDMI timing is based on the format resolution: for resolutions
+less than or equal to 720x576 the colorspace is set to SMPTE-170M, for
+others it is set to REC-709 (CEA-861 timings) or sRGB (VESA DMT timings).
+
+The pixel aspect ratio will depend on the HDMI timing: for 720x480 is it
+set as for the NTSC TV standard, for 720x576 it is set as for the PAL TV
+standard, and for all others a 1:1 pixel aspect ratio is returned.
+
+An HDMI output has a valid EDID which can be obtained through VIDIOC_G_EDID.
+
+There is a maximum of 15 HDMI outputs (if there are more, then they will be
+reduced to 15) since that's the limitation of the EDID physical address. See
+also the CEC section for more details.
+
+VBI Capture
+-----------
+
+There are three types of VBI capture devices: those that only support raw
+(undecoded) VBI, those that only support sliced (decoded) VBI and those that
+support both. This is determined by the node_types module option. In all
+cases the driver will generate valid VBI data: for 60 Hz standards it will
+generate Closed Caption and XDS data. The closed caption stream will
+alternate between "Hello world!" and "Closed captions test" every second.
+The XDS stream will give the current time once a minute. For 50 Hz standards
+it will generate the Wide Screen Signal which is based on the actual Video
+Aspect Ratio control setting and teletext pages 100-159, one page per frame.
+
+The VBI device will only work for the S-Video and TV inputs, it will give
+back an error if the current input is a webcam or HDMI.
+
+
+VBI Output
+----------
+
+There are three types of VBI output devices: those that only support raw
+(undecoded) VBI, those that only support sliced (decoded) VBI and those that
+support both. This is determined by the node_types module option.
+
+The sliced VBI output supports the Wide Screen Signal and the teletext signal
+for 50 Hz standards and Closed Captioning + XDS for 60 Hz standards.
+
+The VBI device will only work for the S-Video output, it will give
+back an error if the current output is HDMI.
+
+
+Radio Receiver
+--------------
+
+The radio receiver emulates an FM/AM/SW receiver. The FM band also supports RDS.
+The frequency ranges are:
+
+	- FM: 64 MHz - 108 MHz
+	- AM: 520 kHz - 1710 kHz
+	- SW: 2300 kHz - 26.1 MHz
+
+Valid channels are emulated every 1 MHz for FM and every 100 kHz for AM and SW.
+The signal strength decreases the further the frequency is from the valid
+frequency until it becomes 0% at +/- 50 kHz (FM) or 5 kHz (AM/SW) from the
+ideal frequency. The initial frequency when the driver is loaded is set to
+95 MHz.
+
+The FM receiver supports RDS as well, both using 'Block I/O' and 'Controls'
+modes. In the 'Controls' mode the RDS information is stored in read-only
+controls. These controls are updated every time the frequency is changed,
+or when the tuner status is requested. The Block I/O method uses the read()
+interface to pass the RDS blocks on to the application for decoding.
+
+The RDS signal is 'detected' for +/- 12.5 kHz around the channel frequency,
+and the further the frequency is away from the valid frequency the more RDS
+errors are randomly introduced into the block I/O stream, up to 50% of all
+blocks if you are +/- 12.5 kHz from the channel frequency. All four errors
+can occur in equal proportions: blocks marked 'CORRECTED', blocks marked
+'ERROR', blocks marked 'INVALID' and dropped blocks.
+
+The generated RDS stream contains all the standard fields contained in a
+0B group, and also radio text and the current time.
+
+The receiver supports HW frequency seek, either in Bounded mode, Wrap Around
+mode or both, which is configurable with the "Radio HW Seek Mode" control.
+
+
+Radio Transmitter
+-----------------
+
+The radio transmitter emulates an FM/AM/SW transmitter. The FM band also supports RDS.
+The frequency ranges are:
+
+	- FM: 64 MHz - 108 MHz
+	- AM: 520 kHz - 1710 kHz
+	- SW: 2300 kHz - 26.1 MHz
+
+The initial frequency when the driver is loaded is 95.5 MHz.
+
+The FM transmitter supports RDS as well, both using 'Block I/O' and 'Controls'
+modes. In the 'Controls' mode the transmitted RDS information is configured
+using controls, and in 'Block I/O' mode the blocks are passed to the driver
+using write().
+
+
+Software Defined Radio Receiver
+-------------------------------
+
+The SDR receiver has three frequency bands for the ADC tuner:
+
+	- 300 kHz
+	- 900 kHz - 2800 kHz
+	- 3200 kHz
+
+The RF tuner supports 50 MHz - 2000 MHz.
+
+The generated data contains the In-phase and Quadrature components of a
+1 kHz tone that has an amplitude of sqrt(2).
+
+
+Metadata Capture
+----------------
+
+The Metadata capture generates UVC format metadata. The PTS and SCR are
+transmitted based on the values set in vivid contols.
+
+The Metadata device will only work for the Webcam input, it will give
+back an error for all other inputs.
+
+
+Metadata Output
+---------------
+
+The Metadata output can be used to set brightness, contrast, saturation and hue.
+
+The Metadata device will only work for the Webcam output, it will give
+back an error for all other outputs.
+
+
+Touch Capture
+-------------
+
+The Touch capture generates touch patterns simulating single tap, double tap,
+triple tap, move from left to right, zoom in, zoom out, palm press (simulating
+a large area being pressed on a touchpad), and simulating 16 simultaneous
+touch points.
+
+Controls
+--------
+
+Different devices support different controls. The sections below will describe
+each control and which devices support them.
+
+
+User Controls - Test Controls
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The Button, Boolean, Integer 32 Bits, Integer 64 Bits, Menu, String, Bitmask and
+Integer Menu are controls that represent all possible control types. The Menu
+control and the Integer Menu control both have 'holes' in their menu list,
+meaning that one or more menu items return EINVAL when VIDIOC_QUERYMENU is called.
+Both menu controls also have a non-zero minimum control value.  These features
+allow you to check if your application can handle such things correctly.
+These controls are supported for every device type.
+
+
+User Controls - Video Capture
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following controls are specific to video capture.
+
+The Brightness, Contrast, Saturation and Hue controls actually work and are
+standard. There is one special feature with the Brightness control: each
+video input has its own brightness value, so changing input will restore
+the brightness for that input. In addition, each video input uses a different
+brightness range (minimum and maximum control values). Switching inputs will
+cause a control event to be sent with the V4L2_EVENT_CTRL_CH_RANGE flag set.
+This allows you to test controls that can change their range.
+
+The 'Gain, Automatic' and Gain controls can be used to test volatile controls:
+if 'Gain, Automatic' is set, then the Gain control is volatile and changes
+constantly. If 'Gain, Automatic' is cleared, then the Gain control is a normal
+control.
+
+The 'Horizontal Flip' and 'Vertical Flip' controls can be used to flip the
+image. These combine with the 'Sensor Flipped Horizontally/Vertically' Vivid
+controls.
+
+The 'Alpha Component' control can be used to set the alpha component for
+formats containing an alpha channel.
+
+
+User Controls - Audio
+~~~~~~~~~~~~~~~~~~~~~
+
+The following controls are specific to video capture and output and radio
+receivers and transmitters.
+
+The 'Volume' and 'Mute' audio controls are typical for such devices to
+control the volume and mute the audio. They don't actually do anything in
+the vivid driver.
+
+
+Vivid Controls
+~~~~~~~~~~~~~~
+
+These vivid custom controls control the image generation, error injection, etc.
+
+
+Test Pattern Controls
+^^^^^^^^^^^^^^^^^^^^^
+
+The Test Pattern Controls are all specific to video capture.
+
+- Test Pattern:
+
+	selects which test pattern to use. Use the CSC Colorbar for
+	testing colorspace conversions: the colors used in that test pattern
+	map to valid colors in all colorspaces. The colorspace conversion
+	is disabled for the other test patterns.
+
+- OSD Text Mode:
+
+	selects whether the text superimposed on the
+	test pattern should be shown, and if so, whether only counters should
+	be displayed or the full text.
+
+- Horizontal Movement:
+
+	selects whether the test pattern should
+	move to the left or right and at what speed.
+
+- Vertical Movement:
+
+	does the same for the vertical direction.
+
+- Show Border:
+
+	show a two-pixel wide border at the edge of the actual image,
+	excluding letter or pillarboxing.
+
+- Show Square:
+
+	show a square in the middle of the image. If the image is
+	displayed with the correct pixel and image aspect ratio corrections,
+	then the width and height of the square on the monitor should be
+	the same.
+
+- Insert SAV Code in Image:
+
+	adds a SAV (Start of Active Video) code to the image.
+	This can be used to check if such codes in the image are inadvertently
+	interpreted instead of being ignored.
+
+- Insert EAV Code in Image:
+
+	does the same for the EAV (End of Active Video) code.
+
+
+Capture Feature Selection Controls
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+These controls are all specific to video capture.
+
+- Sensor Flipped Horizontally:
+
+	the image is flipped horizontally and the
+	V4L2_IN_ST_HFLIP input status flag is set. This emulates the case where
+	a sensor is for example mounted upside down.
+
+- Sensor Flipped Vertically:
+
+	the image is flipped vertically and the
+	V4L2_IN_ST_VFLIP input status flag is set. This emulates the case where
+	a sensor is for example mounted upside down.
+
+- Standard Aspect Ratio:
+
+	selects if the image aspect ratio as used for the TV or
+	S-Video input should be 4x3, 16x9 or anamorphic widescreen. This may
+	introduce letterboxing.
+
+- DV Timings Aspect Ratio:
+
+	selects if the image aspect ratio as used for the HDMI
+	input should be the same as the source width and height ratio, or if
+	it should be 4x3 or 16x9. This may introduce letter or pillarboxing.
+
+- Timestamp Source:
+
+	selects when the timestamp for each buffer is taken.
+
+- Colorspace:
+
+	selects which colorspace should be used when generating the image.
+	This only applies if the CSC Colorbar test pattern is selected,
+	otherwise the test pattern will go through unconverted.
+	This behavior is also what you want, since a 75% Colorbar
+	should really have 75% signal intensity and should not be affected
+	by colorspace conversions.
+
+	Changing the colorspace will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates a detected colorspace change.
+
+- Transfer Function:
+
+	selects which colorspace transfer function should be used when
+	generating an image. This only applies if the CSC Colorbar test pattern is
+	selected, otherwise the test pattern will go through unconverted.
+	This behavior is also what you want, since a 75% Colorbar
+	should really have 75% signal intensity and should not be affected
+	by colorspace conversions.
+
+	Changing the transfer function will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates a detected colorspace change.
+
+- Y'CbCr Encoding:
+
+	selects which Y'CbCr encoding should be used when generating
+	a Y'CbCr image.	This only applies if the format is set to a Y'CbCr format
+	as opposed to an RGB format.
+
+	Changing the Y'CbCr encoding will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates a detected colorspace change.
+
+- Quantization:
+
+	selects which quantization should be used for the RGB or Y'CbCr
+	encoding when generating the test pattern.
+
+	Changing the quantization will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates a detected colorspace change.
+
+- Limited RGB Range (16-235):
+
+	selects if the RGB range of the HDMI source should
+	be limited or full range. This combines with the Digital Video 'Rx RGB
+	Quantization Range' control and can be used to test what happens if
+	a source provides you with the wrong quantization range information.
+	See the description of that control for more details.
+
+- Apply Alpha To Red Only:
+
+	apply the alpha channel as set by the 'Alpha Component'
+	user control to the red color of the test pattern only.
+
+- Enable Capture Cropping:
+
+	enables crop support. This control is only present if
+	the ccs_cap_mode module option is set to the default value of -1 and if
+	the no_error_inj module option is set to 0 (the default).
+
+- Enable Capture Composing:
+
+	enables composing support. This control is only
+	present if the ccs_cap_mode module option is set to the default value of
+	-1 and if the no_error_inj module option is set to 0 (the default).
+
+- Enable Capture Scaler:
+
+	enables support for a scaler (maximum 4 times upscaling
+	and downscaling). This control is only present if the ccs_cap_mode
+	module option is set to the default value of -1 and if the no_error_inj
+	module option is set to 0 (the default).
+
+- Maximum EDID Blocks:
+
+	determines how many EDID blocks the driver supports.
+	Note that the vivid driver does not actually interpret new EDID
+	data, it just stores it. It allows for up to 256 EDID blocks
+	which is the maximum supported by the standard.
+
+- Fill Percentage of Frame:
+
+	can be used to draw only the top X percent
+	of the image. Since each frame has to be drawn by the driver, this
+	demands a lot of the CPU. For large resolutions this becomes
+	problematic. By drawing only part of the image this CPU load can
+	be reduced.
+
+
+Output Feature Selection Controls
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+These controls are all specific to video output.
+
+- Enable Output Cropping:
+
+	enables crop support. This control is only present if
+	the ccs_out_mode module option is set to the default value of -1 and if
+	the no_error_inj module option is set to 0 (the default).
+
+- Enable Output Composing:
+
+	enables composing support. This control is only
+	present if the ccs_out_mode module option is set to the default value of
+	-1 and if the no_error_inj module option is set to 0 (the default).
+
+- Enable Output Scaler:
+
+	enables support for a scaler (maximum 4 times upscaling
+	and downscaling). This control is only present if the ccs_out_mode
+	module option is set to the default value of -1 and if the no_error_inj
+	module option is set to 0 (the default).
+
+
+Error Injection Controls
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following two controls are only valid for video and vbi capture.
+
+- Standard Signal Mode:
+
+	selects the behavior of VIDIOC_QUERYSTD: what should it return?
+
+	Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates a changed input condition (e.g. a cable
+	was plugged in or out).
+
+- Standard:
+
+	selects the standard that VIDIOC_QUERYSTD should return if the
+	previous control is set to "Selected Standard".
+
+	Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates a changed input standard.
+
+
+The following two controls are only valid for video capture.
+
+- DV Timings Signal Mode:
+
+	selects the behavior of VIDIOC_QUERY_DV_TIMINGS: what
+	should it return?
+
+	Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates a changed input condition (e.g. a cable
+	was plugged in or out).
+
+- DV Timings:
+
+	selects the timings the VIDIOC_QUERY_DV_TIMINGS should return
+	if the previous control is set to "Selected DV Timings".
+
+	Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates changed input timings.
+
+
+The following controls are only present if the no_error_inj module option
+is set to 0 (the default). These controls are valid for video and vbi
+capture and output streams and for the SDR capture device except for the
+Disconnect control which is valid for all devices.
+
+- Wrap Sequence Number:
+
+	test what happens when you wrap the sequence number in
+	struct v4l2_buffer around.
+
+- Wrap Timestamp:
+
+	test what happens when you wrap the timestamp in struct
+	v4l2_buffer around.
+
+- Percentage of Dropped Buffers:
+
+	sets the percentage of buffers that
+	are never returned by the driver (i.e., they are dropped).
+
+- Disconnect:
+
+	emulates a USB disconnect. The device will act as if it has
+	been disconnected. Only after all open filehandles to the device
+	node have been closed will the device become 'connected' again.
+
+- Inject V4L2_BUF_FLAG_ERROR:
+
+	when pressed, the next frame returned by
+	the driver will have the error flag set (i.e. the frame is marked
+	corrupt).
+
+- Inject VIDIOC_REQBUFS Error:
+
+	when pressed, the next REQBUFS or CREATE_BUFS
+	ioctl call will fail with an error. To be precise: the videobuf2
+	queue_setup() op will return -EINVAL.
+
+- Inject VIDIOC_QBUF Error:
+
+	when pressed, the next VIDIOC_QBUF or
+	VIDIOC_PREPARE_BUFFER ioctl call will fail with an error. To be
+	precise: the videobuf2 buf_prepare() op will return -EINVAL.
+
+- Inject VIDIOC_STREAMON Error:
+
+	when pressed, the next VIDIOC_STREAMON ioctl
+	call will fail with an error. To be precise: the videobuf2
+	start_streaming() op will return -EINVAL.
+
+- Inject Fatal Streaming Error:
+
+	when pressed, the streaming core will be
+	marked as having suffered a fatal error, the only way to recover
+	from that is to stop streaming. To be precise: the videobuf2
+	vb2_queue_error() function is called.
+
+
+VBI Raw Capture Controls
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+- Interlaced VBI Format:
+
+	if set, then the raw VBI data will be interlaced instead
+	of providing it grouped by field.
+
+
+Digital Video Controls
+~~~~~~~~~~~~~~~~~~~~~~
+
+- Rx RGB Quantization Range:
+
+	sets the RGB quantization detection of the HDMI
+	input. This combines with the Vivid 'Limited RGB Range (16-235)'
+	control and can be used to test what happens if a source provides
+	you with the wrong quantization range information. This can be tested
+	by selecting an HDMI input, setting this control to Full or Limited
+	range and selecting the opposite in the 'Limited RGB Range (16-235)'
+	control. The effect is easy to see if the 'Gray Ramp' test pattern
+	is selected.
+
+- Tx RGB Quantization Range:
+
+	sets the RGB quantization detection of the HDMI
+	output. It is currently not used for anything in vivid, but most HDMI
+	transmitters would typically have this control.
+
+- Transmit Mode:
+
+	sets the transmit mode of the HDMI output to HDMI or DVI-D. This
+	affects the reported colorspace since DVI_D outputs will always use
+	sRGB.
+
+- Display Present:
+
+	sets the presence of a "display" on the HDMI output. This affects
+	the tx_edid_present, tx_hotplug and tx_rxsense controls.
+
+
+FM Radio Receiver Controls
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- RDS Reception:
+
+	set if the RDS receiver should be enabled.
+
+- RDS Program Type:
+
+
+- RDS PS Name:
+
+
+- RDS Radio Text:
+
+
+- RDS Traffic Announcement:
+
+
+- RDS Traffic Program:
+
+
+- RDS Music:
+
+	these are all read-only controls. If RDS Rx I/O Mode is set to
+	"Block I/O", then they are inactive as well. If RDS Rx I/O Mode is set
+	to "Controls", then these controls report the received RDS data.
+
+.. note::
+	The vivid implementation of this is pretty basic: they are only
+	updated when you set a new frequency or when you get the tuner status
+	(VIDIOC_G_TUNER).
+
+- Radio HW Seek Mode:
+
+	can be one of "Bounded", "Wrap Around" or "Both". This
+	determines if VIDIOC_S_HW_FREQ_SEEK will be bounded by the frequency
+	range or wrap-around or if it is selectable by the user.
+
+- Radio Programmable HW Seek:
+
+	if set, then the user can provide the lower and
+	upper bound of the HW Seek. Otherwise the frequency range boundaries
+	will be used.
+
+- Generate RBDS Instead of RDS:
+
+	if set, then generate RBDS (the US variant of
+	RDS) data instead of RDS (European-style RDS). This affects only the
+	PICODE and PTY codes.
+
+- RDS Rx I/O Mode:
+
+	this can be "Block I/O" where the RDS blocks have to be read()
+	by the application, or "Controls" where the RDS data is provided by
+	the RDS controls mentioned above.
+
+
+FM Radio Modulator Controls
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- RDS Program ID:
+
+
+- RDS Program Type:
+
+
+- RDS PS Name:
+
+
+- RDS Radio Text:
+
+
+- RDS Stereo:
+
+
+- RDS Artificial Head:
+
+
+- RDS Compressed:
+
+
+- RDS Dynamic PTY:
+
+
+- RDS Traffic Announcement:
+
+
+- RDS Traffic Program:
+
+
+- RDS Music:
+
+	these are all controls that set the RDS data that is transmitted by
+	the FM modulator.
+
+- RDS Tx I/O Mode:
+
+	this can be "Block I/O" where the application has to use write()
+	to pass the RDS blocks to the driver, or "Controls" where the RDS data
+	is Provided by the RDS controls mentioned above.
+
+Metadata Capture Controls
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- Generate PTS
+
+        if set, then the generated metadata stream contains Presentation timestamp.
+
+- Generate SCR
+
+        if set, then the generated metadata stream contains Source Clock information.
+
+Video, VBI and RDS Looping
+--------------------------
+
+The vivid driver supports looping of video output to video input, VBI output
+to VBI input and RDS output to RDS input. For video/VBI looping this emulates
+as if a cable was hooked up between the output and input connector. So video
+and VBI looping is only supported between S-Video and HDMI inputs and outputs.
+VBI is only valid for S-Video as it makes no sense for HDMI.
+
+Since radio is wireless this looping always happens if the radio receiver
+frequency is close to the radio transmitter frequency. In that case the radio
+transmitter will 'override' the emulated radio stations.
+
+Looping is currently supported only between devices created by the same
+vivid driver instance.
+
+
+Video and Sliced VBI looping
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The way to enable video/VBI looping is currently fairly crude. A 'Loop Video'
+control is available in the "Vivid" control class of the video
+capture and VBI capture devices. When checked the video looping will be enabled.
+Once enabled any video S-Video or HDMI input will show a static test pattern
+until the video output has started. At that time the video output will be
+looped to the video input provided that:
+
+- the input type matches the output type. So the HDMI input cannot receive
+  video from the S-Video output.
+
+- the video resolution of the video input must match that of the video output.
+  So it is not possible to loop a 50 Hz (720x576) S-Video output to a 60 Hz
+  (720x480) S-Video input, or a 720p60 HDMI output to a 1080p30 input.
+
+- the pixel formats must be identical on both sides. Otherwise the driver would
+  have to do pixel format conversion as well, and that's taking things too far.
+
+- the field settings must be identical on both sides. Same reason as above:
+  requiring the driver to convert from one field format to another complicated
+  matters too much. This also prohibits capturing with 'Field Top' or 'Field
+  Bottom' when the output video is set to 'Field Alternate'. This combination,
+  while legal, became too complicated to support. Both sides have to be 'Field
+  Alternate' for this to work. Also note that for this specific case the
+  sequence and field counting in struct v4l2_buffer on the capture side may not
+  be 100% accurate.
+
+- field settings V4L2_FIELD_SEQ_TB/BT are not supported. While it is possible to
+  implement this, it would mean a lot of work to get this right. Since these
+  field values are rarely used the decision was made not to implement this for
+  now.
+
+- on the input side the "Standard Signal Mode" for the S-Video input or the
+  "DV Timings Signal Mode" for the HDMI input should be configured so that a
+  valid signal is passed to the video input.
+
+The framerates do not have to match, although this might change in the future.
+
+By default you will see the OSD text superimposed on top of the looped video.
+This can be turned off by changing the "OSD Text Mode" control of the video
+capture device.
+
+For VBI looping to work all of the above must be valid and in addition the vbi
+output must be configured for sliced VBI. The VBI capture side can be configured
+for either raw or sliced VBI. Note that at the moment only CC/XDS (60 Hz formats)
+and WSS (50 Hz formats) VBI data is looped. Teletext VBI data is not looped.
+
+
+Radio & RDS Looping
+~~~~~~~~~~~~~~~~~~~
+
+As mentioned in section 6 the radio receiver emulates stations are regular
+frequency intervals. Depending on the frequency of the radio receiver a
+signal strength value is calculated (this is returned by VIDIOC_G_TUNER).
+However, it will also look at the frequency set by the radio transmitter and
+if that results in a higher signal strength than the settings of the radio
+transmitter will be used as if it was a valid station. This also includes
+the RDS data (if any) that the transmitter 'transmits'. This is received
+faithfully on the receiver side. Note that when the driver is loaded the
+frequencies of the radio receiver and transmitter are not identical, so
+initially no looping takes place.
+
+
+Cropping, Composing, Scaling
+----------------------------
+
+This driver supports cropping, composing and scaling in any combination. Normally
+which features are supported can be selected through the Vivid controls,
+but it is also possible to hardcode it when the module is loaded through the
+ccs_cap_mode and ccs_out_mode module options. See section 1 on the details of
+these module options.
+
+This allows you to test your application for all these variations.
+
+Note that the webcam input never supports cropping, composing or scaling. That
+only applies to the TV/S-Video/HDMI inputs and outputs. The reason is that
+webcams, including this virtual implementation, normally use
+VIDIOC_ENUM_FRAMESIZES to list a set of discrete framesizes that it supports.
+And that does not combine with cropping, composing or scaling. This is
+primarily a limitation of the V4L2 API which is carefully reproduced here.
+
+The minimum and maximum resolutions that the scaler can achieve are 16x16 and
+(4096 * 4) x (2160 x 4), but it can only scale up or down by a factor of 4 or
+less. So for a source resolution of 1280x720 the minimum the scaler can do is
+320x180 and the maximum is 5120x2880. You can play around with this using the
+qv4l2 test tool and you will see these dependencies.
+
+This driver also supports larger 'bytesperline' settings, something that
+VIDIOC_S_FMT allows but that few drivers implement.
+
+The scaler is a simple scaler that uses the Coarse Bresenham algorithm. It's
+designed for speed and simplicity, not quality.
+
+If the combination of crop, compose and scaling allows it, then it is possible
+to change crop and compose rectangles on the fly.
+
+
+Formats
+-------
+
+The driver supports all the regular packed and planar 4:4:4, 4:2:2 and 4:2:0
+YUYV formats, 8, 16, 24 and 32 RGB packed formats and various multiplanar
+formats.
+
+The alpha component can be set through the 'Alpha Component' User control
+for those formats that support it. If the 'Apply Alpha To Red Only' control
+is set, then the alpha component is only used for the color red and set to
+0 otherwise.
+
+The driver has to be configured to support the multiplanar formats. By default
+the driver instances are single-planar. This can be changed by setting the
+multiplanar module option, see section 1 for more details on that option.
+
+If the driver instance is using the multiplanar formats/API, then the first
+single planar format (YUYV) and the multiplanar NV16M and NV61M formats the
+will have a plane that has a non-zero data_offset of 128 bytes. It is rare for
+data_offset to be non-zero, so this is a useful feature for testing applications.
+
+Video output will also honor any data_offset that the application set.
+
+
+Capture Overlay
+---------------
+
+Note: capture overlay support is implemented primarily to test the existing
+V4L2 capture overlay API. In practice few if any GPUs support such overlays
+anymore, and neither are they generally needed anymore since modern hardware
+is so much more capable. By setting flag 0x10000 in the node_types module
+option the vivid driver will create a simple framebuffer device that can be
+used for testing this API. Whether this API should be used for new drivers is
+questionable.
+
+This driver has support for a destructive capture overlay with bitmap clipping
+and list clipping (up to 16 rectangles) capabilities. Overlays are not
+supported for multiplanar formats. It also honors the struct v4l2_window field
+setting: if it is set to FIELD_TOP or FIELD_BOTTOM and the capture setting is
+FIELD_ALTERNATE, then only the top or bottom fields will be copied to the overlay.
+
+The overlay only works if you are also capturing at that same time. This is a
+vivid limitation since it copies from a buffer to the overlay instead of
+filling the overlay directly. And if you are not capturing, then no buffers
+are available to fill.
+
+In addition, the pixelformat of the capture format and that of the framebuffer
+must be the same for the overlay to work. Otherwise VIDIOC_OVERLAY will return
+an error.
+
+In order to really see what it going on you will need to create two vivid
+instances: the first with a framebuffer enabled. You configure the capture
+overlay of the second instance to use the framebuffer of the first, then
+you start capturing in the second instance. For the first instance you setup
+the output overlay for the video output, turn on video looping and capture
+to see the blended framebuffer overlay that's being written to by the second
+instance. This setup would require the following commands:
+
+.. code-block:: none
+
+	$ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
+	$ v4l2-ctl -d1 --find-fb
+	/dev/fb1 is the framebuffer associated with base address 0x12800000
+	$ sudo v4l2-ctl -d2 --set-fbuf fb=1
+	$ v4l2-ctl -d1 --set-fbuf fb=1
+	$ v4l2-ctl -d0 --set-fmt-video=pixelformat='AR15'
+	$ v4l2-ctl -d1 --set-fmt-video-out=pixelformat='AR15'
+	$ v4l2-ctl -d2 --set-fmt-video=pixelformat='AR15'
+	$ v4l2-ctl -d0 -i2
+	$ v4l2-ctl -d2 -i2
+	$ v4l2-ctl -d2 -c horizontal_movement=4
+	$ v4l2-ctl -d1 --overlay=1
+	$ v4l2-ctl -d1 -c loop_video=1
+	$ v4l2-ctl -d2 --stream-mmap --overlay=1
+
+And from another console:
+
+.. code-block:: none
+
+	$ v4l2-ctl -d1 --stream-out-mmap
+
+And yet another console:
+
+.. code-block:: none
+
+	$ qv4l2
+
+and start streaming.
+
+As you can see, this is not for the faint of heart...
+
+
+Output Overlay
+--------------
+
+Note: output overlays are primarily implemented in order to test the existing
+V4L2 output overlay API. Whether this API should be used for new drivers is
+questionable.
+
+This driver has support for an output overlay and is capable of:
+
+	- bitmap clipping,
+	- list clipping (up to 16 rectangles)
+	- chromakey
+	- source chromakey
+	- global alpha
+	- local alpha
+	- local inverse alpha
+
+Output overlays are not supported for multiplanar formats. In addition, the
+pixelformat of the capture format and that of the framebuffer must be the
+same for the overlay to work. Otherwise VIDIOC_OVERLAY will return an error.
+
+Output overlays only work if the driver has been configured to create a
+framebuffer by setting flag 0x10000 in the node_types module option. The
+created framebuffer has a size of 720x576 and supports ARGB 1:5:5:5 and
+RGB 5:6:5.
+
+In order to see the effects of the various clipping, chromakeying or alpha
+processing capabilities you need to turn on video looping and see the results
+on the capture side. The use of the clipping, chromakeying or alpha processing
+capabilities will slow down the video loop considerably as a lot of checks have
+to be done per pixel.
+
+
+CEC (Consumer Electronics Control)
+----------------------------------
+
+If there are HDMI inputs then a CEC adapter will be created that has
+the same number of input ports. This is the equivalent of e.g. a TV that
+has that number of inputs. Each HDMI output will also create a
+CEC adapter that is hooked up to the corresponding input port, or (if there
+are more outputs than inputs) is not hooked up at all. In other words,
+this is the equivalent of hooking up each output device to an input port of
+the TV. Any remaining output devices remain unconnected.
+
+The EDID that each output reads reports a unique CEC physical address that is
+based on the physical address of the EDID of the input. So if the EDID of the
+receiver has physical address A.B.0.0, then each output will see an EDID
+containing physical address A.B.C.0 where C is 1 to the number of inputs. If
+there are more outputs than inputs then the remaining outputs have a CEC adapter
+that is disabled and reports an invalid physical address.
+
+
+Some Future Improvements
+------------------------
+
+Just as a reminder and in no particular order:
+
+- Add a virtual alsa driver to test audio
+- Add virtual sub-devices and media controller support
+- Some support for testing compressed video
+- Add support to loop raw VBI output to raw VBI input
+- Add support to loop teletext sliced VBI output to VBI input
+- Fix sequence/field numbering when looping of video with alternate fields
+- Add support for V4L2_CID_BG_COLOR for video outputs
+- Add ARGB888 overlay support: better testing of the alpha channel
+- Improve pixel aspect support in the tpg code by passing a real v4l2_fract
+- Use per-queue locks and/or per-device locks to improve throughput
+- Add support to loop from a specific output to a specific input across
+  vivid instances
+- The SDR radio should use the same 'frequencies' for stations as the normal
+  radio receiver, and give back noise if the frequency doesn't match up with
+  a station frequency
+- Make a thread for the RDS generation, that would help in particular for the
+  "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated
+  in real-time.
+- Changing the EDID should cause hotplug detect emulation to happen.
diff --git a/Documentation/admin-guide/media/zr364xx.rst b/Documentation/admin-guide/media/zr364xx.rst
new file mode 100644
index 000000000000..7291e54b8be3
--- /dev/null
+++ b/Documentation/admin-guide/media/zr364xx.rst
@@ -0,0 +1,102 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Zoran 364xx based USB webcam module
+===================================
+
+site: http://royale.zerezo.com/zr364xx/
+
+mail: royale@zerezo.com
+
+
+Introduction
+------------
+
+
+This brings support under Linux for the Aiptek PocketDV 3300 and similar
+devices in webcam mode. If you just want to get on your PC the pictures
+and movies on the camera, you should use the usb-storage module instead.
+
+The driver works with several other cameras in webcam mode (see the list
+below).
+
+Possible chipsets are : ZR36430 (ZR36430BGC) and
+maybe ZR36431, ZR36440, ZR36442...
+
+You can try the experience changing the vendor/product ID values (look
+at the source code).
+
+You can get these values by looking at /var/log/messages when you plug
+your camera, or by typing : cat /sys/kernel/debug/usb/devices.
+
+
+Install
+-------
+
+In order to use this driver, you must compile it with your kernel,
+with the following config options::
+
+    ./scripts/config -e USB
+    ./scripts/config -m MEDIA_SUPPORT
+    ./scripts/config -e MEDIA_USB_SUPPORT
+    ./scripts/config -e MEDIA_CAMERA_SUPPORT
+    ./scripts/config -m USB_ZR364XX
+
+Usage
+-----
+
+modprobe zr364xx debug=X mode=Y
+
+- debug      : set to 1 to enable verbose debug messages
+- mode       : 0 = 320x240, 1 = 160x120, 2 = 640x480
+
+You can then use the camera with V4L2 compatible applications, for
+example Ekiga.
+
+To capture a single image, try this: dd if=/dev/video0 of=test.jpg bs=1M
+count=1
+
+links
+-----
+
+http://mxhaard.free.fr/ (support for many others cams including some Aiptek PocketDV)
+http://www.harmwal.nl/pccam880/ (this project also supports cameras based on this chipset)
+
+Supported devices
+-----------------
+
+======  =======  ==============  ====================
+Vendor  Product  Distributor     Model
+======  =======  ==============  ====================
+0x08ca  0x0109   Aiptek          PocketDV 3300
+0x08ca  0x0109   Maxell          Maxcam PRO DV3
+0x041e  0x4024   Creative        PC-CAM 880
+0x0d64  0x0108   Aiptek          Fidelity 3200
+0x0d64  0x0108   Praktica        DCZ 1.3 S
+0x0d64  0x0108   Genius          Digital Camera (?)
+0x0d64  0x0108   DXG Technology  Fashion Cam
+0x0546  0x3187   Polaroid        iON 230
+0x0d64  0x3108   Praktica        Exakta DC 2200
+0x0d64  0x3108   Genius          G-Shot D211
+0x0595  0x4343   Concord         Eye-Q Duo 1300
+0x0595  0x4343   Concord         Eye-Q Duo 2000
+0x0595  0x4343   Fujifilm        EX-10
+0x0595  0x4343   Ricoh           RDC-6000
+0x0595  0x4343   Digitrex        DSC 1300
+0x0595  0x4343   Firstline       FDC 2000
+0x0bb0  0x500d   Concord         EyeQ Go Wireless
+0x0feb  0x2004   CRS Electronic  3.3 Digital Camera
+0x0feb  0x2004   Packard Bell    DSC-300
+0x055f  0xb500   Mustek          MDC 3000
+0x08ca  0x2062   Aiptek          PocketDV 5700
+0x052b  0x1a18   Chiphead        Megapix V12
+0x04c8  0x0729   Konica          Revio 2
+0x04f2  0xa208   Creative        PC-CAM 850
+0x0784  0x0040   Traveler        Slimline X5
+0x06d6  0x0034   Trust           Powerc@m 750
+0x0a17  0x0062   Pentax          Optio 50L
+0x06d6  0x003b   Trust           Powerc@m 970Z
+0x0a17  0x004e   Pentax          Optio 50
+0x041e  0x405d   Creative        DiVi CAM 516
+0x08ca  0x2102   Aiptek          DV T300
+0x06d6  0x003d   Trust           Powerc@m 910Z
+======  =======  ==============  ====================
diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst
index 1cc0bc78d10e..5026e58826e2 100644
--- a/Documentation/admin-guide/mm/hugetlbpage.rst
+++ b/Documentation/admin-guide/mm/hugetlbpage.rst
@@ -100,6 +100,41 @@ with a huge page size selection parameter "hugepagesz=<size>".  <size> must
 be specified in bytes with optional scale suffix [kKmMgG].  The default huge
 page size may be selected with the "default_hugepagesz=<size>" boot parameter.
 
+Hugetlb boot command line parameter semantics
+hugepagesz - Specify a huge page size.  Used in conjunction with hugepages
+	parameter to preallocate a number of huge pages of the specified
+	size.  Hence, hugepagesz and hugepages are typically specified in
+	pairs such as:
+		hugepagesz=2M hugepages=512
+	hugepagesz can only be specified once on the command line for a
+	specific huge page size.  Valid huge page sizes are architecture
+	dependent.
+hugepages - Specify the number of huge pages to preallocate.  This typically
+	follows a valid hugepagesz or default_hugepagesz parameter.  However,
+	if hugepages is the first or only hugetlb command line parameter it
+	implicitly specifies the number of huge pages of default size to
+	allocate.  If the number of huge pages of default size is implicitly
+	specified, it can not be overwritten by a hugepagesz,hugepages
+	parameter pair for the default size.
+	For example, on an architecture with 2M default huge page size:
+		hugepages=256 hugepagesz=2M hugepages=512
+	will result in 256 2M huge pages being allocated and a warning message
+	indicating that the hugepages=512 parameter is ignored.  If a hugepages
+	parameter is preceded by an invalid hugepagesz parameter, it will
+	be ignored.
+default_hugepagesz - Specify the default huge page size.  This parameter can
+	only be specified once on the command line.  default_hugepagesz can
+	optionally be followed by the hugepages parameter to preallocate a
+	specific number of huge pages of default size.  The number of default
+	sized huge pages to preallocate can also be implicitly specified as
+	mentioned in the hugepages section above.  Therefore, on an
+	architecture with 2M default huge page size:
+		hugepages=256
+		default_hugepagesz=2M hugepages=256
+		hugepages=256 default_hugepagesz=2M
+	will all result in 256 2M huge pages being allocated.  Valid default
+	huge page size is architecture dependent.
+
 When multiple huge page sizes are supported, ``/proc/sys/vm/nr_hugepages``
 indicates the current number of pre-allocated huge pages of the default size.
 Thus, one can use the following command to dynamically allocate/deallocate
diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index 2f31de8f7c74..6a233e42be08 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -220,6 +220,13 @@ memory. A lower value can prevent THPs from being
 collapsed, resulting fewer pages being collapsed into
 THPs, and lower memory access performance.
 
+``max_ptes_shared`` specifies how many pages can be shared across multiple
+processes. Exceeding the number would block the collapse::
+
+	/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_shared
+
+A higher value may increase memory footprint for some workloads.
+
 Boot parameter
 ==============
 
diff --git a/Documentation/admin-guide/mm/userfaultfd.rst b/Documentation/admin-guide/mm/userfaultfd.rst
index c30176e67900..0bf49d7313ad 100644
--- a/Documentation/admin-guide/mm/userfaultfd.rst
+++ b/Documentation/admin-guide/mm/userfaultfd.rst
@@ -12,107 +12,107 @@ and more generally they allow userland to take control of various
 memory page faults, something otherwise only the kernel code could do.
 
 For example userfaults allows a proper and more optimal implementation
-of the PROT_NONE+SIGSEGV trick.
+of the ``PROT_NONE+SIGSEGV`` trick.
 
 Design
 ======
 
-Userfaults are delivered and resolved through the userfaultfd syscall.
+Userfaults are delivered and resolved through the ``userfaultfd`` syscall.
 
-The userfaultfd (aside from registering and unregistering virtual
+The ``userfaultfd`` (aside from registering and unregistering virtual
 memory ranges) provides two primary functionalities:
 
-1) read/POLLIN protocol to notify a userland thread of the faults
+1) ``read/POLLIN`` protocol to notify a userland thread of the faults
    happening
 
-2) various UFFDIO_* ioctls that can manage the virtual memory regions
-   registered in the userfaultfd that allows userland to efficiently
+2) various ``UFFDIO_*`` ioctls that can manage the virtual memory regions
+   registered in the ``userfaultfd`` that allows userland to efficiently
    resolve the userfaults it receives via 1) or to manage the virtual
    memory in the background
 
 The real advantage of userfaults if compared to regular virtual memory
 management of mremap/mprotect is that the userfaults in all their
 operations never involve heavyweight structures like vmas (in fact the
-userfaultfd runtime load never takes the mmap_sem for writing).
+``userfaultfd`` runtime load never takes the mmap_sem for writing).
 
 Vmas are not suitable for page- (or hugepage) granular fault tracking
 when dealing with virtual address spaces that could span
 Terabytes. Too many vmas would be needed for that.
 
-The userfaultfd once opened by invoking the syscall, can also be
+The ``userfaultfd`` once opened by invoking the syscall, can also be
 passed using unix domain sockets to a manager process, so the same
 manager process could handle the userfaults of a multitude of
 different processes without them being aware about what is going on
-(well of course unless they later try to use the userfaultfd
+(well of course unless they later try to use the ``userfaultfd``
 themselves on the same region the manager is already tracking, which
-is a corner case that would currently return -EBUSY).
+is a corner case that would currently return ``-EBUSY``).
 
 API
 ===
 
-When first opened the userfaultfd must be enabled invoking the
-UFFDIO_API ioctl specifying a uffdio_api.api value set to UFFD_API (or
-a later API version) which will specify the read/POLLIN protocol
-userland intends to speak on the UFFD and the uffdio_api.features
-userland requires. The UFFDIO_API ioctl if successful (i.e. if the
-requested uffdio_api.api is spoken also by the running kernel and the
+When first opened the ``userfaultfd`` must be enabled invoking the
+``UFFDIO_API`` ioctl specifying a ``uffdio_api.api`` value set to ``UFFD_API`` (or
+a later API version) which will specify the ``read/POLLIN`` protocol
+userland intends to speak on the ``UFFD`` and the ``uffdio_api.features``
+userland requires. The ``UFFDIO_API`` ioctl if successful (i.e. if the
+requested ``uffdio_api.api`` is spoken also by the running kernel and the
 requested features are going to be enabled) will return into
-uffdio_api.features and uffdio_api.ioctls two 64bit bitmasks of
+``uffdio_api.features`` and ``uffdio_api.ioctls`` two 64bit bitmasks of
 respectively all the available features of the read(2) protocol and
 the generic ioctl available.
 
-The uffdio_api.features bitmask returned by the UFFDIO_API ioctl
-defines what memory types are supported by the userfaultfd and what
+The ``uffdio_api.features`` bitmask returned by the ``UFFDIO_API`` ioctl
+defines what memory types are supported by the ``userfaultfd`` and what
 events, except page fault notifications, may be generated.
 
-If the kernel supports registering userfaultfd ranges on hugetlbfs
-virtual memory areas, UFFD_FEATURE_MISSING_HUGETLBFS will be set in
-uffdio_api.features. Similarly, UFFD_FEATURE_MISSING_SHMEM will be
-set if the kernel supports registering userfaultfd ranges on shared
-memory (covering all shmem APIs, i.e. tmpfs, IPCSHM, /dev/zero
-MAP_SHARED, memfd_create, etc).
+If the kernel supports registering ``userfaultfd`` ranges on hugetlbfs
+virtual memory areas, ``UFFD_FEATURE_MISSING_HUGETLBFS`` will be set in
+``uffdio_api.features``. Similarly, ``UFFD_FEATURE_MISSING_SHMEM`` will be
+set if the kernel supports registering ``userfaultfd`` ranges on shared
+memory (covering all shmem APIs, i.e. tmpfs, ``IPCSHM``, ``/dev/zero``,
+``MAP_SHARED``, ``memfd_create``, etc).
 
-The userland application that wants to use userfaultfd with hugetlbfs
+The userland application that wants to use ``userfaultfd`` with hugetlbfs
 or shared memory need to set the corresponding flag in
-uffdio_api.features to enable those features.
+``uffdio_api.features`` to enable those features.
 
 If the userland desires to receive notifications for events other than
-page faults, it has to verify that uffdio_api.features has appropriate
-UFFD_FEATURE_EVENT_* bits set. These events are described in more
-detail below in "Non-cooperative userfaultfd" section.
-
-Once the userfaultfd has been enabled the UFFDIO_REGISTER ioctl should
-be invoked (if present in the returned uffdio_api.ioctls bitmask) to
-register a memory range in the userfaultfd by setting the
-uffdio_register structure accordingly. The uffdio_register.mode
+page faults, it has to verify that ``uffdio_api.features`` has appropriate
+``UFFD_FEATURE_EVENT_*`` bits set. These events are described in more
+detail below in `Non-cooperative userfaultfd`_ section.
+
+Once the ``userfaultfd`` has been enabled the ``UFFDIO_REGISTER`` ioctl should
+be invoked (if present in the returned ``uffdio_api.ioctls`` bitmask) to
+register a memory range in the ``userfaultfd`` by setting the
+uffdio_register structure accordingly. The ``uffdio_register.mode``
 bitmask will specify to the kernel which kind of faults to track for
-the range (UFFDIO_REGISTER_MODE_MISSING would track missing
-pages). The UFFDIO_REGISTER ioctl will return the
-uffdio_register.ioctls bitmask of ioctls that are suitable to resolve
+the range (``UFFDIO_REGISTER_MODE_MISSING`` would track missing
+pages). The ``UFFDIO_REGISTER`` ioctl will return the
+``uffdio_register.ioctls`` bitmask of ioctls that are suitable to resolve
 userfaults on the range registered. Not all ioctls will necessarily be
 supported for all memory types depending on the underlying virtual
 memory backend (anonymous memory vs tmpfs vs real filebacked
 mappings).
 
-Userland can use the uffdio_register.ioctls to manage the virtual
+Userland can use the ``uffdio_register.ioctls`` to manage the virtual
 address space in the background (to add or potentially also remove
-memory from the userfaultfd registered range). This means a userfault
+memory from the ``userfaultfd`` registered range). This means a userfault
 could be triggering just before userland maps in the background the
 user-faulted page.
 
-The primary ioctl to resolve userfaults is UFFDIO_COPY. That
+The primary ioctl to resolve userfaults is ``UFFDIO_COPY``. That
 atomically copies a page into the userfault registered range and wakes
-up the blocked userfaults (unless uffdio_copy.mode &
-UFFDIO_COPY_MODE_DONTWAKE is set). Other ioctl works similarly to
-UFFDIO_COPY. They're atomic as in guaranteeing that nothing can see an
-half copied page since it'll keep userfaulting until the copy has
-finished.
+up the blocked userfaults
+(unless ``uffdio_copy.mode & UFFDIO_COPY_MODE_DONTWAKE`` is set).
+Other ioctl works similarly to ``UFFDIO_COPY``. They're atomic as in
+guaranteeing that nothing can see an half copied page since it'll
+keep userfaulting until the copy has finished.
 
 Notes:
 
-- If you requested UFFDIO_REGISTER_MODE_MISSING when registering then
+- If you requested ``UFFDIO_REGISTER_MODE_MISSING`` when registering then
   you must provide some kind of page in your thread after reading from
-  the uffd.  You must provide either UFFDIO_COPY or UFFDIO_ZEROPAGE.
+  the uffd.  You must provide either ``UFFDIO_COPY`` or ``UFFDIO_ZEROPAGE``.
   The normal behavior of the OS automatically providing a zero page on
   an annonymous mmaping is not in place.
 
@@ -122,13 +122,13 @@ Notes:
 
 - You get the address of the access that triggered the missing page
   event out of a struct uffd_msg that you read in the thread from the
-  uffd.  You can supply as many pages as you want with UFFDIO_COPY or
-  UFFDIO_ZEROPAGE.  Keep in mind that unless you used DONTWAKE then
+  uffd.  You can supply as many pages as you want with ``UFFDIO_COPY`` or
+  ``UFFDIO_ZEROPAGE``.  Keep in mind that unless you used DONTWAKE then
   the first of any of those IOCTLs wakes up the faulting thread.
 
-- Be sure to test for all errors including (pollfd[0].revents &
-  POLLERR).  This can happen, e.g. when ranges supplied were
-  incorrect.
+- Be sure to test for all errors including
+  (``pollfd[0].revents & POLLERR``).  This can happen, e.g. when ranges
+  supplied were incorrect.
 
 Write Protect Notifications
 ---------------------------
@@ -136,41 +136,42 @@ Write Protect Notifications
 This is equivalent to (but faster than) using mprotect and a SIGSEGV
 signal handler.
 
-Firstly you need to register a range with UFFDIO_REGISTER_MODE_WP.
-Instead of using mprotect(2) you use ioctl(uffd, UFFDIO_WRITEPROTECT,
-struct *uffdio_writeprotect) while mode = UFFDIO_WRITEPROTECT_MODE_WP
+Firstly you need to register a range with ``UFFDIO_REGISTER_MODE_WP``.
+Instead of using mprotect(2) you use
+``ioctl(uffd, UFFDIO_WRITEPROTECT, struct *uffdio_writeprotect)``
+while ``mode = UFFDIO_WRITEPROTECT_MODE_WP``
 in the struct passed in.  The range does not default to and does not
 have to be identical to the range you registered with.  You can write
 protect as many ranges as you like (inside the registered range).
 Then, in the thread reading from uffd the struct will have
-msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WP set. Now you send
-ioctl(uffd, UFFDIO_WRITEPROTECT, struct *uffdio_writeprotect) again
-while pagefault.mode does not have UFFDIO_WRITEPROTECT_MODE_WP set.
-This wakes up the thread which will continue to run with writes. This
+``msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WP`` set. Now you send
+``ioctl(uffd, UFFDIO_WRITEPROTECT, struct *uffdio_writeprotect)``
+again while ``pagefault.mode`` does not have ``UFFDIO_WRITEPROTECT_MODE_WP``
+set. This wakes up the thread which will continue to run with writes. This
 allows you to do the bookkeeping about the write in the uffd reading
 thread before the ioctl.
 
-If you registered with both UFFDIO_REGISTER_MODE_MISSING and
-UFFDIO_REGISTER_MODE_WP then you need to think about the sequence in
+If you registered with both ``UFFDIO_REGISTER_MODE_MISSING`` and
+``UFFDIO_REGISTER_MODE_WP`` then you need to think about the sequence in
 which you supply a page and undo write protect.  Note that there is a
 difference between writes into a WP area and into a !WP area.  The
-former will have UFFD_PAGEFAULT_FLAG_WP set, the latter
-UFFD_PAGEFAULT_FLAG_WRITE.  The latter did not fail on protection but
-you still need to supply a page when UFFDIO_REGISTER_MODE_MISSING was
+former will have ``UFFD_PAGEFAULT_FLAG_WP`` set, the latter
+``UFFD_PAGEFAULT_FLAG_WRITE``.  The latter did not fail on protection but
+you still need to supply a page when ``UFFDIO_REGISTER_MODE_MISSING`` was
 used.
 
 QEMU/KVM
 ========
 
-QEMU/KVM is using the userfaultfd syscall to implement postcopy live
+QEMU/KVM is using the ``userfaultfd`` syscall to implement postcopy live
 migration. Postcopy live migration is one form of memory
 externalization consisting of a virtual machine running with part or
 all of its memory residing on a different node in the cloud. The
-userfaultfd abstraction is generic enough that not a single line of
+``userfaultfd`` abstraction is generic enough that not a single line of
 KVM kernel code had to be modified in order to add postcopy live
 migration to QEMU.
 
-Guest async page faults, FOLL_NOWAIT and all other GUP features work
+Guest async page faults, ``FOLL_NOWAIT`` and all other ``GUP*`` features work
 just fine in combination with userfaults. Userfaults trigger async
 page faults in the guest scheduler so those guest processes that
 aren't waiting for userfaults (i.e. network bound) can keep running in
@@ -183,19 +184,19 @@ generating userfaults for readonly guest regions.
 The implementation of postcopy live migration currently uses one
 single bidirectional socket but in the future two different sockets
 will be used (to reduce the latency of the userfaults to the minimum
-possible without having to decrease /proc/sys/net/ipv4/tcp_wmem).
+possible without having to decrease ``/proc/sys/net/ipv4/tcp_wmem``).
 
 The QEMU in the source node writes all pages that it knows are missing
 in the destination node, into the socket, and the migration thread of
-the QEMU running in the destination node runs UFFDIO_COPY|ZEROPAGE
-ioctls on the userfaultfd in order to map the received pages into the
-guest (UFFDIO_ZEROCOPY is used if the source page was a zero page).
+the QEMU running in the destination node runs ``UFFDIO_COPY|ZEROPAGE``
+ioctls on the ``userfaultfd`` in order to map the received pages into the
+guest (``UFFDIO_ZEROCOPY`` is used if the source page was a zero page).
 
 A different postcopy thread in the destination node listens with
-poll() to the userfaultfd in parallel. When a POLLIN event is
+poll() to the ``userfaultfd`` in parallel. When a ``POLLIN`` event is
 generated after a userfault triggers, the postcopy thread read() from
-the userfaultfd and receives the fault address (or -EAGAIN in case the
-userfault was already resolved and waken by a UFFDIO_COPY|ZEROPAGE run
+the ``userfaultfd`` and receives the fault address (or ``-EAGAIN`` in case the
+userfault was already resolved and waken by a ``UFFDIO_COPY|ZEROPAGE`` run
 by the parallel QEMU migration thread).
 
 After the QEMU postcopy thread (running in the destination node) gets
@@ -206,7 +207,7 @@ remaining missing pages from that new page offset. Soon after that
 (just the time to flush the tcp_wmem queue through the network) the
 migration thread in the QEMU running in the destination node will
 receive the page that triggered the userfault and it'll map it as
-usual with the UFFDIO_COPY|ZEROPAGE (without actually knowing if it
+usual with the ``UFFDIO_COPY|ZEROPAGE`` (without actually knowing if it
 was spontaneously sent by the source or if it was an urgent page
 requested through a userfault).
 
@@ -219,74 +220,74 @@ checked to find which missing pages to send in round robin and we seek
 over it when receiving incoming userfaults. After sending each page of
 course the bitmap is updated accordingly. It's also useful to avoid
 sending the same page twice (in case the userfault is read by the
-postcopy thread just before UFFDIO_COPY|ZEROPAGE runs in the migration
+postcopy thread just before ``UFFDIO_COPY|ZEROPAGE`` runs in the migration
 thread).
 
 Non-cooperative userfaultfd
 ===========================
 
-When the userfaultfd is monitored by an external manager, the manager
+When the ``userfaultfd`` is monitored by an external manager, the manager
 must be able to track changes in the process virtual memory
 layout. Userfaultfd can notify the manager about such changes using
 the same read(2) protocol as for the page fault notifications. The
 manager has to explicitly enable these events by setting appropriate
-bits in uffdio_api.features passed to UFFDIO_API ioctl:
+bits in ``uffdio_api.features`` passed to ``UFFDIO_API`` ioctl:
 
-UFFD_FEATURE_EVENT_FORK
-	enable userfaultfd hooks for fork(). When this feature is
-	enabled, the userfaultfd context of the parent process is
+``UFFD_FEATURE_EVENT_FORK``
+	enable ``userfaultfd`` hooks for fork(). When this feature is
+	enabled, the ``userfaultfd`` context of the parent process is
 	duplicated into the newly created process. The manager
-	receives UFFD_EVENT_FORK with file descriptor of the new
-	userfaultfd context in the uffd_msg.fork.
+	receives ``UFFD_EVENT_FORK`` with file descriptor of the new
+	``userfaultfd`` context in the ``uffd_msg.fork``.
 
-UFFD_FEATURE_EVENT_REMAP
+``UFFD_FEATURE_EVENT_REMAP``
 	enable notifications about mremap() calls. When the
 	non-cooperative process moves a virtual memory area to a
 	different location, the manager will receive
-	UFFD_EVENT_REMAP. The uffd_msg.remap will contain the old and
+	``UFFD_EVENT_REMAP``. The ``uffd_msg.remap`` will contain the old and
 	new addresses of the area and its original length.
 
-UFFD_FEATURE_EVENT_REMOVE
+``UFFD_FEATURE_EVENT_REMOVE``
 	enable notifications about madvise(MADV_REMOVE) and
-	madvise(MADV_DONTNEED) calls. The event UFFD_EVENT_REMOVE will
-	be generated upon these calls to madvise. The uffd_msg.remove
+	madvise(MADV_DONTNEED) calls. The event ``UFFD_EVENT_REMOVE`` will
+	be generated upon these calls to madvise(). The ``uffd_msg.remove``
 	will contain start and end addresses of the removed area.
 
-UFFD_FEATURE_EVENT_UNMAP
+``UFFD_FEATURE_EVENT_UNMAP``
 	enable notifications about memory unmapping. The manager will
-	get UFFD_EVENT_UNMAP with uffd_msg.remove containing start and
+	get ``UFFD_EVENT_UNMAP`` with ``uffd_msg.remove`` containing start and
 	end addresses of the unmapped area.
 
-Although the UFFD_FEATURE_EVENT_REMOVE and UFFD_FEATURE_EVENT_UNMAP
+Although the ``UFFD_FEATURE_EVENT_REMOVE`` and ``UFFD_FEATURE_EVENT_UNMAP``
 are pretty similar, they quite differ in the action expected from the
-userfaultfd manager. In the former case, the virtual memory is
+``userfaultfd`` manager. In the former case, the virtual memory is
 removed, but the area is not, the area remains monitored by the
-userfaultfd, and if a page fault occurs in that area it will be
+``userfaultfd``, and if a page fault occurs in that area it will be
 delivered to the manager. The proper resolution for such page fault is
 to zeromap the faulting address. However, in the latter case, when an
 area is unmapped, either explicitly (with munmap() system call), or
 implicitly (e.g. during mremap()), the area is removed and in turn the
-userfaultfd context for such area disappears too and the manager will
+``userfaultfd`` context for such area disappears too and the manager will
 not get further userland page faults from the removed area. Still, the
 notification is required in order to prevent manager from using
-UFFDIO_COPY on the unmapped area.
+``UFFDIO_COPY`` on the unmapped area.
 
 Unlike userland page faults which have to be synchronous and require
 explicit or implicit wakeup, all the events are delivered
 asynchronously and the non-cooperative process resumes execution as
-soon as manager executes read(). The userfaultfd manager should
-carefully synchronize calls to UFFDIO_COPY with the events
-processing. To aid the synchronization, the UFFDIO_COPY ioctl will
-return -ENOSPC when the monitored process exits at the time of
-UFFDIO_COPY, and -ENOENT, when the non-cooperative process has changed
-its virtual memory layout simultaneously with outstanding UFFDIO_COPY
+soon as manager executes read(). The ``userfaultfd`` manager should
+carefully synchronize calls to ``UFFDIO_COPY`` with the events
+processing. To aid the synchronization, the ``UFFDIO_COPY`` ioctl will
+return ``-ENOSPC`` when the monitored process exits at the time of
+``UFFDIO_COPY``, and ``-ENOENT``, when the non-cooperative process has changed
+its virtual memory layout simultaneously with outstanding ``UFFDIO_COPY``
 operation.
 
 The current asynchronous model of the event delivery is optimal for
-single threaded non-cooperative userfaultfd manager implementations. A
+single threaded non-cooperative ``userfaultfd`` manager implementations. A
 synchronous event delivery model can be added later as a new
-userfaultfd feature to facilitate multithreading enhancements of the
-non cooperative manager, for example to allow UFFDIO_COPY ioctls to
+``userfaultfd`` feature to facilitate multithreading enhancements of the
+non cooperative manager, for example to allow ``UFFDIO_COPY`` ioctls to
 run in parallel to the event reception. Single threaded
 implementations should continue to use the current async event
 delivery model instead.
diff --git a/Documentation/admin-guide/nfs/nfsroot.rst b/Documentation/admin-guide/nfs/nfsroot.rst
index 82a4fda057f9..c6772075c80c 100644
--- a/Documentation/admin-guide/nfs/nfsroot.rst
+++ b/Documentation/admin-guide/nfs/nfsroot.rst
@@ -18,7 +18,7 @@ Mounting the root filesystem via NFS (nfsroot)
 In order to use a diskless system, such as an X-terminal or printer server for
 example, it is necessary for the root filesystem to be present on a non-disk
 device. This may be an initramfs (see
-Documentation/filesystems/ramfs-rootfs-initramfs.txt), a ramdisk (see
+Documentation/filesystems/ramfs-rootfs-initramfs.rst), a ramdisk (see
 Documentation/admin-guide/initrd.rst) or a filesystem mounted via NFS. The
 following text describes on how to use NFS for the root filesystem. For the rest
 of this text 'client' means the diskless system, and 'server' means the NFS
diff --git a/Documentation/admin-guide/perf-security.rst b/Documentation/admin-guide/perf-security.rst
index 72effa7c23b9..1307b5274a0f 100644
--- a/Documentation/admin-guide/perf-security.rst
+++ b/Documentation/admin-guide/perf-security.rst
@@ -1,6 +1,6 @@
 .. _perf_security:
 
-Perf Events and tool security
+Perf events and tool security
 =============================
 
 Overview
@@ -42,11 +42,11 @@ categories:
 Data that belong to the fourth category can potentially contain
 sensitive process data. If PMUs in some monitoring modes capture values
 of execution context registers or data from process memory then access
-to such monitoring capabilities requires to be ordered and secured
-properly. So, perf_events/Perf performance monitoring is the subject for
-security access control management [5]_ .
+to such monitoring modes requires to be ordered and secured properly.
+So, perf_events performance monitoring and observability operations are
+the subject for security access control management [5]_ .
 
-perf_events/Perf access control
+perf_events access control
 -------------------------------
 
 To perform security checks, the Linux implementation splits processes
@@ -66,11 +66,25 @@ into distinct units, known as capabilities [6]_ , which can be
 independently enabled and disabled on per-thread basis for processes and
 files of unprivileged users.
 
-Unprivileged processes with enabled CAP_SYS_ADMIN capability are treated
+Unprivileged processes with enabled CAP_PERFMON capability are treated
 as privileged processes with respect to perf_events performance
-monitoring and bypass *scope* permissions checks in the kernel.
-
-Unprivileged processes using perf_events system call API is also subject
+monitoring and observability operations, thus, bypass *scope* permissions
+checks in the kernel. CAP_PERFMON implements the principle of least
+privilege [13]_ (POSIX 1003.1e: 2.2.2.39) for performance monitoring and
+observability operations in the kernel and provides a secure approach to
+perfomance monitoring and observability in the system.
+
+For backward compatibility reasons the access to perf_events monitoring and
+observability operations is also open for CAP_SYS_ADMIN privileged
+processes but CAP_SYS_ADMIN usage for secure monitoring and observability
+use cases is discouraged with respect to the CAP_PERFMON capability.
+If system audit records [14]_ for a process using perf_events system call
+API contain denial records of acquiring both CAP_PERFMON and CAP_SYS_ADMIN
+capabilities then providing the process with CAP_PERFMON capability singly
+is recommended as the preferred secure approach to resolve double access
+denial logging related to usage of performance monitoring and observability.
+
+Unprivileged processes using perf_events system call are also subject
 for PTRACE_MODE_READ_REALCREDS ptrace access mode check [7]_ , whose
 outcome determines whether monitoring is permitted. So unprivileged
 processes provided with CAP_SYS_PTRACE capability are effectively
@@ -82,14 +96,14 @@ performance analysis of monitored processes or a system. For example,
 CAP_SYSLOG capability permits reading kernel space memory addresses from
 /proc/kallsyms file.
 
-perf_events/Perf privileged users
+Privileged Perf users groups
 ---------------------------------
 
 Mechanisms of capabilities, privileged capability-dumb files [6]_ and
-file system ACLs [10]_ can be used to create a dedicated group of
-perf_events/Perf privileged users who are permitted to execute
-performance monitoring without scope limits. The following steps can be
-taken to create such a group of privileged Perf users.
+file system ACLs [10]_ can be used to create dedicated groups of
+privileged Perf users who are permitted to execute performance monitoring
+and observability without scope limits. The following steps can be
+taken to create such groups of privileged Perf users.
 
 1. Create perf_users group of privileged Perf users, assign perf_users
    group to Perf tool executable and limit access to the executable for
@@ -108,30 +122,51 @@ taken to create such a group of privileged Perf users.
    -rwxr-x---  2 root perf_users  11M Oct 19 15:12 perf
 
 2. Assign the required capabilities to the Perf tool executable file and
-   enable members of perf_users group with performance monitoring
+   enable members of perf_users group with monitoring and observability
    privileges [6]_ :
 
 ::
 
-   # setcap "cap_sys_admin,cap_sys_ptrace,cap_syslog=ep" perf
-   # setcap -v "cap_sys_admin,cap_sys_ptrace,cap_syslog=ep" perf
+   # setcap "cap_perfmon,cap_sys_ptrace,cap_syslog=ep" perf
+   # setcap -v "cap_perfmon,cap_sys_ptrace,cap_syslog=ep" perf
    perf: OK
    # getcap perf
-   perf = cap_sys_ptrace,cap_sys_admin,cap_syslog+ep
+   perf = cap_sys_ptrace,cap_syslog,cap_perfmon+ep
+
+If the libcap installed doesn't yet support "cap_perfmon", use "38" instead,
+i.e.:
+
+::
+
+   # setcap "38,cap_ipc_lock,cap_sys_ptrace,cap_syslog=ep" perf
+
+Note that you may need to have 'cap_ipc_lock' in the mix for tools such as
+'perf top', alternatively use 'perf top -m N', to reduce the memory that
+it uses for the perf ring buffer, see the memory allocation section below.
+
+Using a libcap without support for CAP_PERFMON will make cap_get_flag(caps, 38,
+CAP_EFFECTIVE, &val) fail, which will lead the default event to be 'cycles:u',
+so as a workaround explicitly ask for the 'cycles' event, i.e.:
+
+::
+
+  # perf top -e cycles
+
+To get kernel and user samples with a perf binary with just CAP_PERFMON.
 
 As a result, members of perf_users group are capable of conducting
-performance monitoring by using functionality of the configured Perf
-tool executable that, when executes, passes perf_events subsystem scope
-checks.
+performance monitoring and observability by using functionality of the
+configured Perf tool executable that, when executes, passes perf_events
+subsystem scope checks.
 
 This specific access control management is only available to superuser
 or root running processes with CAP_SETPCAP, CAP_SETFCAP [6]_
 capabilities.
 
-perf_events/Perf unprivileged users
+Unprivileged users
 -----------------------------------
 
-perf_events/Perf *scope* and *access* control for unprivileged processes
+perf_events *scope* and *access* control for unprivileged processes
 is governed by perf_event_paranoid [2]_ setting:
 
 -1:
@@ -166,7 +201,7 @@ is governed by perf_event_paranoid [2]_ setting:
      perf_event_mlock_kb locking limit is imposed but ignored for
      unprivileged processes with CAP_IPC_LOCK capability.
 
-perf_events/Perf resource control
+Resource control
 ---------------------------------
 
 Open file descriptors
@@ -227,4 +262,5 @@ Bibliography
 .. [10] `<http://man7.org/linux/man-pages/man5/acl.5.html>`_
 .. [11] `<http://man7.org/linux/man-pages/man2/getrlimit.2.html>`_
 .. [12] `<http://man7.org/linux/man-pages/man5/limits.conf.5.html>`_
-
+.. [13] `<https://sites.google.com/site/fullycapable>`_
+.. [14] `<http://man7.org/linux/man-pages/man8/auditd.8.html>`_
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
index ad392f3aee06..39d80bc29ccd 100644
--- a/Documentation/admin-guide/pm/intel_pstate.rst
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -62,9 +62,10 @@ on the capabilities of the processor.
 Active Mode
 -----------
 
-This is the default operation mode of ``intel_pstate``.  If it works in this
-mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq``
-policies contains the string "intel_pstate".
+This is the default operation mode of ``intel_pstate`` for processors with
+hardware-managed P-states (HWP) support.  If it works in this mode, the
+``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` policies
+contains the string "intel_pstate".
 
 In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
 provides its own scaling algorithms for P-state selection.  Those algorithms
@@ -138,12 +139,13 @@ internal P-state selection logic to be less performance-focused.
 Active Mode Without HWP
 ~~~~~~~~~~~~~~~~~~~~~~~
 
-This is the default operation mode for processors that do not support the HWP
-feature.  It also is used by default with the ``intel_pstate=no_hwp`` argument
-in the kernel command line.  However, in this mode ``intel_pstate`` may refuse
-to work with the given processor if it does not recognize it.  [Note that
-``intel_pstate`` will never refuse to work with any processor with the HWP
-feature enabled.]
+This operation mode is optional for processors that do not support the HWP
+feature or when the ``intel_pstate=no_hwp`` argument is passed to the kernel in
+the command line.  The active mode is used in those cases if the
+``intel_pstate=active`` argument is passed to the kernel in the command line.
+In this mode ``intel_pstate`` may refuse to work with processors that are not
+recognized by it.  [Note that ``intel_pstate`` will never refuse to work with
+any processor with the HWP feature enabled.]
 
 In this mode ``intel_pstate`` registers utilization update callbacks with the
 CPU scheduler in order to run a P-state selection algorithm, either
@@ -188,10 +190,14 @@ is not set.
 Passive Mode
 ------------
 
-This mode is used if the ``intel_pstate=passive`` argument is passed to the
-kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too).
-Like in the active mode without HWP support, in this mode ``intel_pstate`` may
-refuse to work with the given processor if it does not recognize it.
+This is the default operation mode of ``intel_pstate`` for processors without
+hardware-managed P-states (HWP) support.  It is always used if the
+``intel_pstate=passive`` argument is passed to the kernel in the command line
+regardless of whether or not the given processor supports HWP.  [Note that the
+``intel_pstate=no_hwp`` setting implies ``intel_pstate=passive`` if it is used
+without ``intel_pstate=active``.]  Like in the active mode without HWP support,
+in this mode ``intel_pstate`` may refuse to work with processors that are not
+recognized by it.
 
 If the driver works in this mode, the ``scaling_driver`` policy attribute in
 ``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
diff --git a/Documentation/admin-guide/ras.rst b/Documentation/admin-guide/ras.rst
index 0310db624964..6cbaab975ee5 100644
--- a/Documentation/admin-guide/ras.rst
+++ b/Documentation/admin-guide/ras.rst
@@ -212,7 +212,7 @@ EDAC - Error Detection And Correction
    purposes.
 
    When the subsystem was pushed upstream for the first time, on
-   Kernel 2.6.16, for the first time, it was renamed to ``EDAC``.
+   Kernel 2.6.16, it was renamed to ``EDAC``.
 
 Purpose
 -------
@@ -351,15 +351,17 @@ controllers. The following example will assume 2 channels:
 	+------------+-----------+-----------+
 	|            |  ``ch0``  |  ``ch1``  |
 	+============+===========+===========+
-	| ``csrow0`` |  DIMM_A0  |  DIMM_B0  |
-	|            |   rank0   |   rank0   |
-	+------------+     -     |     -     |
+	|            |**DIMM_A0**|**DIMM_B0**|
+	+------------+-----------+-----------+
+	| ``csrow0`` |   rank0   |   rank0   |
+	+------------+-----------+-----------+
 	| ``csrow1`` |   rank1   |   rank1   |
 	+------------+-----------+-----------+
-	| ``csrow2`` |  DIMM_A1  | DIMM_B1   |
-	|            |   rank0   |   rank0   |
-	+------------+     -     |     -     |
-	| ``csrow3`` |   rank1   |   rank1   |
+	|            |**DIMM_A1**|**DIMM_B1**|
+	+------------+-----------+-----------+
+	| ``csrow2`` |    rank0  |  rank0    |
+	+------------+-----------+-----------+
+	| ``csrow3`` |    rank1  |  rank1    |
 	+------------+-----------+-----------+
 
 In the above example, there are 4 physical slots on the motherboard
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index 0d427fd10941..065e6d9d39ad 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -102,6 +102,30 @@ See the ``type_of_loader`` and ``ext_loader_ver`` fields in
 :doc:`/x86/boot` for additional information.
 
 
+bpf_stats_enabled
+=================
+
+Controls whether the kernel should collect statistics on BPF programs
+(total time spent running, number of times run...). Enabling
+statistics causes a slight reduction in performance on each program
+run. The statistics can be seen using ``bpftool``.
+
+= ===================================
+0 Don't collect statistics (default).
+1 Collect statistics.
+= ===================================
+
+
+cad_pid
+=======
+
+This is the pid which will be signalled on reboot (notably, by
+Ctrl-Alt-Delete). Writing a value to this file which doesn't
+correspond to a running process will result in ``-ESRCH``.
+
+See also `ctrl-alt-del`_.
+
+
 cap_last_cap
 ============
 
@@ -277,6 +301,20 @@ Path for the hotplug policy agent.
 Default value is "``/sbin/hotplug``".
 
 
+hung_task_all_cpu_backtrace:
+================
+
+If this option is set, the kernel will send an NMI to all CPUs to dump
+their backtraces when a hung task is detected. This file shows up if
+CONFIG_DETECT_HUNG_TASK and CONFIG_SMP are enabled.
+
+0: Won't show all CPUs backtraces when a hung task is detected.
+This is the default behavior.
+
+1: Will non-maskably interrupt all CPUs and dump their backtraces when
+a hung task is detected.
+
+
 hung_task_panic
 ===============
 
@@ -546,6 +584,22 @@ rate for each task.
 scanned for a given scan.
 
 
+oops_all_cpu_backtrace:
+================
+
+If this option is set, the kernel will send an NMI to all CPUs to dump
+their backtraces when an oops event occurs. It should be used as a last
+resort in case a panic cannot be triggered (to protect VMs running, for
+example) or kdump can't be collected. This file shows up if CONFIG_SMP
+is enabled.
+
+0: Won't show all CPUs backtraces when an oops is detected.
+This is the default behavior.
+
+1: Will non-maskably interrupt all CPUs and dump their backtraces when
+an oops event is detected.
+
+
 osrelease, ostype & version
 ===========================
 
@@ -721,7 +775,13 @@ perf_event_paranoid
 ===================
 
 Controls use of the performance events system by unprivileged
-users (without CAP_SYS_ADMIN).  The default value is 2.
+users (without CAP_PERFMON).  The default value is 2.
+
+For backward compatibility reasons access to system performance
+monitoring and observability remains open for CAP_SYS_ADMIN
+privileged processes but CAP_SYS_ADMIN usage for secure system
+performance monitoring and observability operations is discouraged
+with respect to CAP_PERFMON use cases.
 
 ===  ==================================================================
  -1  Allow use of (almost) all events by all users.
@@ -730,13 +790,13 @@ users (without CAP_SYS_ADMIN).  The default value is 2.
      ``CAP_IPC_LOCK``.
 
 >=0  Disallow ftrace function tracepoint by users without
-     ``CAP_SYS_ADMIN``.
+     ``CAP_PERFMON``.
 
-     Disallow raw tracepoint access by users without ``CAP_SYS_ADMIN``.
+     Disallow raw tracepoint access by users without ``CAP_PERFMON``.
 
->=1  Disallow CPU event access by users without ``CAP_SYS_ADMIN``.
+>=1  Disallow CPU event access by users without ``CAP_PERFMON``.
 
->=2  Disallow kernel profiling by users without ``CAP_SYS_ADMIN``.
+>=2  Disallow kernel profiling by users without ``CAP_PERFMON``.
 ===  ==================================================================
 
 
@@ -1178,6 +1238,16 @@ NMI switch that most IA32 servers have fires unknown NMI up, for
 example.  If a system hangs up, try pressing the NMI switch.
 
 
+unprivileged_bpf_disabled
+=========================
+
+Writing 1 to this entry will disable unprivileged calls to ``bpf()``;
+once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` will return
+``-EPERM``.
+
+Once set, this can't be cleared.
+
+
 watchdog
 ========
 
diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
index e043c9213388..2ad1b77a7182 100644
--- a/Documentation/admin-guide/sysctl/net.rst
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -353,8 +353,8 @@ socket's buffer. It will not take effect unless PF_UNIX flag is specified.
 
 3. /proc/sys/net/ipv4 - IPV4 settings
 -------------------------------------
-Please see: Documentation/networking/ip-sysctl.txt and ipvs-sysctl.txt for
-descriptions of these entries.
+Please see: Documentation/networking/ip-sysctl.rst and
+Documentation/admin-guide/sysctl/net.rst for descriptions of these entries.
 
 
 4. Appletalk
diff --git a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
index a3f1a47b6f1c..7552dbc1cc54 100644
--- a/Documentation/arm64/booting.rst
+++ b/Documentation/arm64/booting.rst
@@ -173,7 +173,10 @@ Before jumping into the kernel, the following conditions must be met:
 - Caches, MMUs
 
   The MMU must be off.
-  Instruction cache may be on or off.
+
+  The instruction cache may be on or off, and must not hold any stale
+  entries corresponding to the loaded kernel image.
+
   The address range corresponding to the loaded kernel image must be
   cleaned to the PoC. In the presence of a system cache or other
   coherent masters with caches enabled, this will typically require
@@ -238,6 +241,7 @@ Before jumping into the kernel, the following conditions must be met:
   - The DT or ACPI tables must describe a GICv2 interrupt controller.
 
   For CPUs with pointer authentication functionality:
+
   - If EL3 is present:
 
     - SCR_EL3.APK (bit 16) must be initialised to 0b1
@@ -249,18 +253,22 @@ Before jumping into the kernel, the following conditions must be met:
     - HCR_EL2.API (bit 41) must be initialised to 0b1
 
   For CPUs with Activity Monitors Unit v1 (AMUv1) extension present:
+
   - If EL3 is present:
-    CPTR_EL3.TAM (bit 30) must be initialised to 0b0
-    CPTR_EL2.TAM (bit 30) must be initialised to 0b0
-    AMCNTENSET0_EL0 must be initialised to 0b1111
-    AMCNTENSET1_EL0 must be initialised to a platform specific value
-    having 0b1 set for the corresponding bit for each of the auxiliary
-    counters present.
+
+    - CPTR_EL3.TAM (bit 30) must be initialised to 0b0
+    - CPTR_EL2.TAM (bit 30) must be initialised to 0b0
+    - AMCNTENSET0_EL0 must be initialised to 0b1111
+    - AMCNTENSET1_EL0 must be initialised to a platform specific value
+      having 0b1 set for the corresponding bit for each of the auxiliary
+      counters present.
+
   - If the kernel is entered at EL1:
-    AMCNTENSET0_EL0 must be initialised to 0b1111
-    AMCNTENSET1_EL0 must be initialised to a platform specific value
-    having 0b1 set for the corresponding bit for each of the auxiliary
-    counters present.
+
+    - AMCNTENSET0_EL0 must be initialised to 0b1111
+    - AMCNTENSET1_EL0 must be initialised to a platform specific value
+      having 0b1 set for the corresponding bit for each of the auxiliary
+      counters present.
 
 The requirements described above for CPU mode, caches, MMUs, architected
 timers, coherency and system registers apply to all CPUs.  All CPUs must
@@ -304,7 +312,8 @@ following manner:
   Documentation/devicetree/bindings/arm/psci.yaml.
 
 - Secondary CPU general-purpose register settings
-  x0 = 0 (reserved for future use)
-  x1 = 0 (reserved for future use)
-  x2 = 0 (reserved for future use)
-  x3 = 0 (reserved for future use)
+
+  - x0 = 0 (reserved for future use)
+  - x1 = 0 (reserved for future use)
+  - x2 = 0 (reserved for future use)
+  - x3 = 0 (reserved for future use)
diff --git a/Documentation/arm64/cpu-feature-registers.rst b/Documentation/arm64/cpu-feature-registers.rst
index 41937a8091aa..314fa5bc2655 100644
--- a/Documentation/arm64/cpu-feature-registers.rst
+++ b/Documentation/arm64/cpu-feature-registers.rst
@@ -176,6 +176,8 @@ infrastructure:
      +------------------------------+---------+---------+
      | SSBS                         | [7-4]   |    y    |
      +------------------------------+---------+---------+
+     | BT                           | [3-0]   |    y    |
+     +------------------------------+---------+---------+
 
 
   4) MIDR_EL1 - Main ID Register
diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst
index 7dfb97dfe416..84a9fd2d41b4 100644
--- a/Documentation/arm64/elf_hwcaps.rst
+++ b/Documentation/arm64/elf_hwcaps.rst
@@ -236,6 +236,11 @@ HWCAP2_RNG
 
     Functionality implied by ID_AA64ISAR0_EL1.RNDR == 0b0001.
 
+HWCAP2_BTI
+
+    Functionality implied by ID_AA64PFR0_EL1.BT == 0b0001.
+
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 2c08c628febd..936cf2a59ca4 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -64,6 +64,10 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #843419         | ARM64_ERRATUM_843419        |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A55      | #1530923        | ARM64_ERRATUM_1530923       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #852523         | N/A                         |
@@ -78,8 +82,6 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 +----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
-+----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1165522        | ARM64_ERRATUM_1165522       |
@@ -88,8 +90,6 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A55      | #1530923        | ARM64_ERRATUM_1530923       |
-+----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
diff --git a/Documentation/atomic_t.txt b/Documentation/atomic_t.txt
index 0ab747e0d5ac..0f1fdedf36bb 100644
--- a/Documentation/atomic_t.txt
+++ b/Documentation/atomic_t.txt
@@ -85,21 +85,21 @@ smp_store_release() respectively. Therefore, if you find yourself only using
 the Non-RMW operations of atomic_t, you do not in fact need atomic_t at all
 and are doing it wrong.
 
-A subtle detail of atomic_set{}() is that it should be observable to the RMW
-ops. That is:
+A note for the implementation of atomic_set{}() is that it must not break the
+atomicity of the RMW ops. That is:
 
-  C atomic-set
+  C Atomic-RMW-ops-are-atomic-WRT-atomic_set
 
   {
-    atomic_set(v, 1);
+    atomic_t v = ATOMIC_INIT(1);
   }
 
-  P1(atomic_t *v)
+  P0(atomic_t *v)
   {
-    atomic_add_unless(v, 1, 0);
+    (void)atomic_add_unless(v, 1, 0);
   }
 
-  P2(atomic_t *v)
+  P1(atomic_t *v)
   {
     atomic_set(v, 0);
   }
@@ -233,19 +233,19 @@ as well. Similarly, something like:
 is an ACQUIRE pattern (though very much not typical), but again the barrier is
 strictly stronger than ACQUIRE. As illustrated:
 
-  C strong-acquire
+  C Atomic-RMW+mb__after_atomic-is-stronger-than-acquire
 
   {
   }
 
-  P1(int *x, atomic_t *y)
+  P0(int *x, atomic_t *y)
   {
     r0 = READ_ONCE(*x);
     smp_rmb();
     r1 = atomic_read(y);
   }
 
-  P2(int *x, atomic_t *y)
+  P1(int *x, atomic_t *y)
   {
     atomic_inc(y);
     smp_mb__after_atomic();
@@ -253,14 +253,14 @@ strictly stronger than ACQUIRE. As illustrated:
   }
 
   exists
-  (r0=1 /\ r1=0)
+  (0:r0=1 /\ 0:r1=0)
 
 This should not happen; but a hypothetical atomic_inc_acquire() --
 (void)atomic_fetch_inc_acquire() for instance -- would allow the outcome,
 because it would not order the W part of the RMW against the following
 WRITE_ONCE.  Thus:
 
-  P1			P2
+  P0			P1
 
 			t = LL.acq *y (0)
 			t++;
diff --git a/Documentation/block/biovecs.rst b/Documentation/block/biovecs.rst
index ad303a2569d3..36771a131b56 100644
--- a/Documentation/block/biovecs.rst
+++ b/Documentation/block/biovecs.rst
@@ -129,6 +129,7 @@ Usage of helpers:
 ::
 
 	bio_for_each_segment_all()
+	bio_for_each_bvec_all()
 	bio_first_bvec_all()
 	bio_first_page_all()
 	bio_last_bvec_all()
@@ -143,4 +144,5 @@ Usage of helpers:
   bio_vec' will contain a multi-page IO vector during the iteration::
 
 	bio_for_each_bvec()
+	bio_for_each_bvec_all()
 	rq_for_each_bvec()
diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst
index f99677f3572f..38b4db8be7a2 100644
--- a/Documentation/bpf/index.rst
+++ b/Documentation/bpf/index.rst
@@ -7,7 +7,7 @@ Filter) facility, with a focus on the extended BPF version (eBPF).
 
 This kernel side documentation is still work in progress.  The main
 textual documentation is (for historical reasons) described in
-`Documentation/networking/filter.txt`_, which describe both classical
+`Documentation/networking/filter.rst`_, which describe both classical
 and extended BPF instruction-set.
 The Cilium project also maintains a `BPF and XDP Reference Guide`_
 that goes into great technical depth about the BPF Architecture.
@@ -59,7 +59,7 @@ Testing and debugging BPF
 
 
 .. Links:
-.. _Documentation/networking/filter.txt: ../networking/filter.txt
+.. _Documentation/networking/filter.rst: ../networking/filter.txt
 .. _man-pages: https://www.kernel.org/doc/man-pages/
 .. _bpf(2): http://man7.org/linux/man-pages/man2/bpf.2.html
 .. _BPF and XDP Reference Guide: http://cilium.readthedocs.io/en/latest/bpf/
diff --git a/Documentation/conf.py b/Documentation/conf.py
index 9ae8e9abf846..f6a1bc07c410 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -388,44 +388,6 @@ if major == 1 and minor < 6:
 #  author, documentclass [howto, manual, or own class]).
 # Sorted in alphabetical order
 latex_documents = [
-    ('admin-guide/index', 'linux-user.tex', 'Linux Kernel User Documentation',
-     'The kernel development community', 'manual'),
-    ('core-api/index', 'core-api.tex', 'The kernel core API manual',
-     'The kernel development community', 'manual'),
-    ('crypto/index', 'crypto-api.tex', 'Linux Kernel Crypto API manual',
-     'The kernel development community', 'manual'),
-    ('dev-tools/index', 'dev-tools.tex', 'Development tools for the Kernel',
-     'The kernel development community', 'manual'),
-    ('doc-guide/index', 'kernel-doc-guide.tex', 'Linux Kernel Documentation Guide',
-     'The kernel development community', 'manual'),
-    ('driver-api/index', 'driver-api.tex', 'The kernel driver API manual',
-     'The kernel development community', 'manual'),
-    ('filesystems/index', 'filesystems.tex', 'Linux Filesystems API',
-     'The kernel development community', 'manual'),
-    ('admin-guide/ext4', 'ext4-admin-guide.tex', 'ext4 Administration Guide',
-     'ext4 Community', 'manual'),
-    ('filesystems/ext4/index', 'ext4-data-structures.tex',
-     'ext4 Data Structures and Algorithms', 'ext4 Community', 'manual'),
-    ('gpu/index', 'gpu.tex', 'Linux GPU Driver Developer\'s Guide',
-     'The kernel development community', 'manual'),
-    ('input/index', 'linux-input.tex', 'The Linux input driver subsystem',
-     'The kernel development community', 'manual'),
-    ('kernel-hacking/index', 'kernel-hacking.tex', 'Unreliable Guide To Hacking The Linux Kernel',
-     'The kernel development community', 'manual'),
-    ('media/index', 'media.tex', 'Linux Media Subsystem Documentation',
-     'The kernel development community', 'manual'),
-    ('networking/index', 'networking.tex', 'Linux Networking Documentation',
-     'The kernel development community', 'manual'),
-    ('process/index', 'development-process.tex', 'Linux Kernel Development Documentation',
-     'The kernel development community', 'manual'),
-    ('security/index', 'security.tex', 'The kernel security subsystem manual',
-     'The kernel development community', 'manual'),
-    ('sh/index', 'sh.tex', 'SuperH architecture implementation manual',
-     'The kernel development community', 'manual'),
-    ('sound/index', 'sound.tex', 'Linux Sound Subsystem Documentation',
-     'The kernel development community', 'manual'),
-    ('userspace-api/index', 'userspace-api.tex', 'The Linux kernel user-space API guide',
-     'The kernel development community', 'manual'),
 ]
 
 # Add all other index files from Documentation/ subdirectories
diff --git a/Documentation/core-api/cachetlb.rst b/Documentation/core-api/cachetlb.rst
index 93cb65d52720..a1582cc79f0f 100644
--- a/Documentation/core-api/cachetlb.rst
+++ b/Documentation/core-api/cachetlb.rst
@@ -213,7 +213,7 @@ Here are the routines, one by one:
 	there will be no entries in the cache for the kernel address
 	space for virtual addresses in the range 'start' to 'end-1'.
 
-	The first of these two routines is invoked after map_vm_area()
+	The first of these two routines is invoked after map_kernel_range()
 	has installed the page table entries.  The second is invoked
 	before unmap_kernel_range() deletes the page table entries.
 
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index 0897ad12c119..b29c4a07beda 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -18,6 +18,7 @@ it.
 
    kernel-api
    workqueue
+   printk-basics
    printk-formats
    symbol-namespaces
 
@@ -34,6 +35,7 @@ Library functionality that is used throughout the kernel.
    xarray
    idr
    circular-buffers
+   rbtree
    generic-radix-tree
    packing
    timekeeping
diff --git a/Documentation/core-api/printk-basics.rst b/Documentation/core-api/printk-basics.rst
new file mode 100644
index 000000000000..563a9ce5fe1d
--- /dev/null
+++ b/Documentation/core-api/printk-basics.rst
@@ -0,0 +1,115 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Message logging with printk
+===========================
+
+printk() is one of the most widely known functions in the Linux kernel. It's the
+standard tool we have for printing messages and usually the most basic way of
+tracing and debugging. If you're familiar with printf(3) you can tell printk()
+is based on it, although it has some functional differences:
+
+  - printk() messages can specify a log level.
+
+  - the format string, while largely compatible with C99, doesn't follow the
+    exact same specification. It has some extensions and a few limitations
+    (no ``%n`` or floating point conversion specifiers). See :ref:`How to get
+    printk format specifiers right <printk-specifiers>`.
+
+All printk() messages are printed to the kernel log buffer, which is a ring
+buffer exported to userspace through /dev/kmsg. The usual way to read it is
+using ``dmesg``.
+
+printk() is typically used like this::
+
+  printk(KERN_INFO "Message: %s\n", arg);
+
+where ``KERN_INFO`` is the log level (note that it's concatenated to the format
+string, the log level is not a separate argument). The available log levels are:
+
++----------------+--------+-----------------------------------------------+
+| Name           | String |  Alias function                               |
++================+========+===============================================+
+| KERN_EMERG     | "0"    | pr_emerg()                                    |
++----------------+--------+-----------------------------------------------+
+| KERN_ALERT     | "1"    | pr_alert()                                    |
++----------------+--------+-----------------------------------------------+
+| KERN_CRIT      | "2"    | pr_crit()                                     |
++----------------+--------+-----------------------------------------------+
+| KERN_ERR       | "3"    | pr_err()                                      |
++----------------+--------+-----------------------------------------------+
+| KERN_WARNING   | "4"    | pr_warn()                                     |
++----------------+--------+-----------------------------------------------+
+| KERN_NOTICE    | "5"    | pr_notice()                                   |
++----------------+--------+-----------------------------------------------+
+| KERN_INFO      | "6"    | pr_info()                                     |
++----------------+--------+-----------------------------------------------+
+| KERN_DEBUG     | "7"    | pr_debug() and pr_devel() if DEBUG is defined |
++----------------+--------+-----------------------------------------------+
+| KERN_DEFAULT   | ""     |                                               |
++----------------+--------+-----------------------------------------------+
+| KERN_CONT      | "c"    | pr_cont()                                     |
++----------------+--------+-----------------------------------------------+
+
+
+The log level specifies the importance of a message. The kernel decides whether
+to show the message immediately (printing it to the current console) depending
+on its log level and the current *console_loglevel* (a kernel variable). If the
+message priority is higher (lower log level value) than the *console_loglevel*
+the message will be printed to the console.
+
+If the log level is omitted, the message is printed with ``KERN_DEFAULT``
+level.
+
+You can check the current *console_loglevel* with::
+
+  $ cat /proc/sys/kernel/printk
+  4        4        1        7
+
+The result shows the *current*, *default*, *minimum* and *boot-time-default* log
+levels.
+
+To change the current console_loglevel simply write the the desired level to
+``/proc/sys/kernel/printk``. For example, to print all messages to the console::
+
+  # echo 8 > /proc/sys/kernel/printk
+
+Another way, using ``dmesg``::
+
+  # dmesg -n 5
+
+sets the console_loglevel to print KERN_WARNING (4) or more severe messages to
+console. See ``dmesg(1)`` for more information.
+
+As an alternative to printk() you can use the ``pr_*()`` aliases for
+logging. This family of macros embed the log level in the macro names. For
+example::
+
+  pr_info("Info message no. %d\n", msg_num);
+
+prints a ``KERN_INFO`` message.
+
+Besides being more concise than the equivalent printk() calls, they can use a
+common definition for the format string through the pr_fmt() macro. For
+instance, defining this at the top of a source file (before any ``#include``
+directive)::
+
+  #define pr_fmt(fmt) "%s:%s: " fmt, KBUILD_MODNAME, __func__
+
+would prefix every pr_*() message in that file with the module and function name
+that originated the message.
+
+For debugging purposes there are also two conditionally-compiled macros:
+pr_debug() and pr_devel(), which are compiled-out unless ``DEBUG`` (or
+also ``CONFIG_DYNAMIC_DEBUG`` in the case of pr_debug()) is defined.
+
+
+Function reference
+==================
+
+.. kernel-doc:: kernel/printk/printk.c
+   :functions: printk
+
+.. kernel-doc:: include/linux/printk.h
+   :functions: pr_emerg pr_alert pr_crit pr_err pr_warn pr_notice pr_info
+      pr_fmt pr_debug pr_devel pr_cont
diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst
index 8ebe46b1af39..1e3838652348 100644
--- a/Documentation/core-api/printk-formats.rst
+++ b/Documentation/core-api/printk-formats.rst
@@ -2,6 +2,8 @@
 How to get printk format specifiers right
 =========================================
 
+.. _printk-specifiers:
+
 :Author: Randy Dunlap <rdunlap@infradead.org>
 :Author: Andrew Murray <amurray@mpc-data.co.uk>
 
diff --git a/Documentation/core-api/rbtree.rst b/Documentation/core-api/rbtree.rst
new file mode 100644
index 000000000000..523d54b60087
--- /dev/null
+++ b/Documentation/core-api/rbtree.rst
@@ -0,0 +1,429 @@
+=================================
+Red-black Trees (rbtree) in Linux
+=================================
+
+
+:Date: January 18, 2007
+:Author: Rob Landley <rob@landley.net>
+
+What are red-black trees, and what are they for?
+------------------------------------------------
+
+Red-black trees are a type of self-balancing binary search tree, used for
+storing sortable key/value data pairs.  This differs from radix trees (which
+are used to efficiently store sparse arrays and thus use long integer indexes
+to insert/access/delete nodes) and hash tables (which are not kept sorted to
+be easily traversed in order, and must be tuned for a specific size and
+hash function where rbtrees scale gracefully storing arbitrary keys).
+
+Red-black trees are similar to AVL trees, but provide faster real-time bounded
+worst case performance for insertion and deletion (at most two rotations and
+three rotations, respectively, to balance the tree), with slightly slower
+(but still O(log n)) lookup time.
+
+To quote Linux Weekly News:
+
+    There are a number of red-black trees in use in the kernel.
+    The deadline and CFQ I/O schedulers employ rbtrees to
+    track requests; the packet CD/DVD driver does the same.
+    The high-resolution timer code uses an rbtree to organize outstanding
+    timer requests.  The ext3 filesystem tracks directory entries in a
+    red-black tree.  Virtual memory areas (VMAs) are tracked with red-black
+    trees, as are epoll file descriptors, cryptographic keys, and network
+    packets in the "hierarchical token bucket" scheduler.
+
+This document covers use of the Linux rbtree implementation.  For more
+information on the nature and implementation of Red Black Trees,  see:
+
+  Linux Weekly News article on red-black trees
+    http://lwn.net/Articles/184495/
+
+  Wikipedia entry on red-black trees
+    http://en.wikipedia.org/wiki/Red-black_tree
+
+Linux implementation of red-black trees
+---------------------------------------
+
+Linux's rbtree implementation lives in the file "lib/rbtree.c".  To use it,
+"#include <linux/rbtree.h>".
+
+The Linux rbtree implementation is optimized for speed, and thus has one
+less layer of indirection (and better cache locality) than more traditional
+tree implementations.  Instead of using pointers to separate rb_node and data
+structures, each instance of struct rb_node is embedded in the data structure
+it organizes.  And instead of using a comparison callback function pointer,
+users are expected to write their own tree search and insert functions
+which call the provided rbtree functions.  Locking is also left up to the
+user of the rbtree code.
+
+Creating a new rbtree
+---------------------
+
+Data nodes in an rbtree tree are structures containing a struct rb_node member::
+
+  struct mytype {
+  	struct rb_node node;
+  	char *keystring;
+  };
+
+When dealing with a pointer to the embedded struct rb_node, the containing data
+structure may be accessed with the standard container_of() macro.  In addition,
+individual members may be accessed directly via rb_entry(node, type, member).
+
+At the root of each rbtree is an rb_root structure, which is initialized to be
+empty via:
+
+  struct rb_root mytree = RB_ROOT;
+
+Searching for a value in an rbtree
+----------------------------------
+
+Writing a search function for your tree is fairly straightforward: start at the
+root, compare each value, and follow the left or right branch as necessary.
+
+Example::
+
+  struct mytype *my_search(struct rb_root *root, char *string)
+  {
+  	struct rb_node *node = root->rb_node;
+
+  	while (node) {
+  		struct mytype *data = container_of(node, struct mytype, node);
+		int result;
+
+		result = strcmp(string, data->keystring);
+
+		if (result < 0)
+  			node = node->rb_left;
+		else if (result > 0)
+  			node = node->rb_right;
+		else
+  			return data;
+	}
+	return NULL;
+  }
+
+Inserting data into an rbtree
+-----------------------------
+
+Inserting data in the tree involves first searching for the place to insert the
+new node, then inserting the node and rebalancing ("recoloring") the tree.
+
+The search for insertion differs from the previous search by finding the
+location of the pointer on which to graft the new node.  The new node also
+needs a link to its parent node for rebalancing purposes.
+
+Example::
+
+  int my_insert(struct rb_root *root, struct mytype *data)
+  {
+  	struct rb_node **new = &(root->rb_node), *parent = NULL;
+
+  	/* Figure out where to put new node */
+  	while (*new) {
+  		struct mytype *this = container_of(*new, struct mytype, node);
+  		int result = strcmp(data->keystring, this->keystring);
+
+		parent = *new;
+  		if (result < 0)
+  			new = &((*new)->rb_left);
+  		else if (result > 0)
+  			new = &((*new)->rb_right);
+  		else
+  			return FALSE;
+  	}
+
+  	/* Add new node and rebalance tree. */
+  	rb_link_node(&data->node, parent, new);
+  	rb_insert_color(&data->node, root);
+
+	return TRUE;
+  }
+
+Removing or replacing existing data in an rbtree
+------------------------------------------------
+
+To remove an existing node from a tree, call::
+
+  void rb_erase(struct rb_node *victim, struct rb_root *tree);
+
+Example::
+
+  struct mytype *data = mysearch(&mytree, "walrus");
+
+  if (data) {
+  	rb_erase(&data->node, &mytree);
+  	myfree(data);
+  }
+
+To replace an existing node in a tree with a new one with the same key, call::
+
+  void rb_replace_node(struct rb_node *old, struct rb_node *new,
+  			struct rb_root *tree);
+
+Replacing a node this way does not re-sort the tree: If the new node doesn't
+have the same key as the old node, the rbtree will probably become corrupted.
+
+Iterating through the elements stored in an rbtree (in sort order)
+------------------------------------------------------------------
+
+Four functions are provided for iterating through an rbtree's contents in
+sorted order.  These work on arbitrary trees, and should not need to be
+modified or wrapped (except for locking purposes)::
+
+  struct rb_node *rb_first(struct rb_root *tree);
+  struct rb_node *rb_last(struct rb_root *tree);
+  struct rb_node *rb_next(struct rb_node *node);
+  struct rb_node *rb_prev(struct rb_node *node);
+
+To start iterating, call rb_first() or rb_last() with a pointer to the root
+of the tree, which will return a pointer to the node structure contained in
+the first or last element in the tree.  To continue, fetch the next or previous
+node by calling rb_next() or rb_prev() on the current node.  This will return
+NULL when there are no more nodes left.
+
+The iterator functions return a pointer to the embedded struct rb_node, from
+which the containing data structure may be accessed with the container_of()
+macro, and individual members may be accessed directly via
+rb_entry(node, type, member).
+
+Example::
+
+  struct rb_node *node;
+  for (node = rb_first(&mytree); node; node = rb_next(node))
+	printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
+
+Cached rbtrees
+--------------
+
+Computing the leftmost (smallest) node is quite a common task for binary
+search trees, such as for traversals or users relying on a the particular
+order for their own logic. To this end, users can use 'struct rb_root_cached'
+to optimize O(logN) rb_first() calls to a simple pointer fetch avoiding
+potentially expensive tree iterations. This is done at negligible runtime
+overhead for maintanence; albeit larger memory footprint.
+
+Similar to the rb_root structure, cached rbtrees are initialized to be
+empty via::
+
+  struct rb_root_cached mytree = RB_ROOT_CACHED;
+
+Cached rbtree is simply a regular rb_root with an extra pointer to cache the
+leftmost node. This allows rb_root_cached to exist wherever rb_root does,
+which permits augmented trees to be supported as well as only a few extra
+interfaces::
+
+  struct rb_node *rb_first_cached(struct rb_root_cached *tree);
+  void rb_insert_color_cached(struct rb_node *, struct rb_root_cached *, bool);
+  void rb_erase_cached(struct rb_node *node, struct rb_root_cached *);
+
+Both insert and erase calls have their respective counterpart of augmented
+trees::
+
+  void rb_insert_augmented_cached(struct rb_node *node, struct rb_root_cached *,
+				  bool, struct rb_augment_callbacks *);
+  void rb_erase_augmented_cached(struct rb_node *, struct rb_root_cached *,
+				 struct rb_augment_callbacks *);
+
+
+Support for Augmented rbtrees
+-----------------------------
+
+Augmented rbtree is an rbtree with "some" additional data stored in
+each node, where the additional data for node N must be a function of
+the contents of all nodes in the subtree rooted at N. This data can
+be used to augment some new functionality to rbtree. Augmented rbtree
+is an optional feature built on top of basic rbtree infrastructure.
+An rbtree user who wants this feature will have to call the augmentation
+functions with the user provided augmentation callback when inserting
+and erasing nodes.
+
+C files implementing augmented rbtree manipulation must include
+<linux/rbtree_augmented.h> instead of <linux/rbtree.h>. Note that
+linux/rbtree_augmented.h exposes some rbtree implementations details
+you are not expected to rely on; please stick to the documented APIs
+there and do not include <linux/rbtree_augmented.h> from header files
+either so as to minimize chances of your users accidentally relying on
+such implementation details.
+
+On insertion, the user must update the augmented information on the path
+leading to the inserted node, then call rb_link_node() as usual and
+rb_augment_inserted() instead of the usual rb_insert_color() call.
+If rb_augment_inserted() rebalances the rbtree, it will callback into
+a user provided function to update the augmented information on the
+affected subtrees.
+
+When erasing a node, the user must call rb_erase_augmented() instead of
+rb_erase(). rb_erase_augmented() calls back into user provided functions
+to updated the augmented information on affected subtrees.
+
+In both cases, the callbacks are provided through struct rb_augment_callbacks.
+3 callbacks must be defined:
+
+- A propagation callback, which updates the augmented value for a given
+  node and its ancestors, up to a given stop point (or NULL to update
+  all the way to the root).
+
+- A copy callback, which copies the augmented value for a given subtree
+  to a newly assigned subtree root.
+
+- A tree rotation callback, which copies the augmented value for a given
+  subtree to a newly assigned subtree root AND recomputes the augmented
+  information for the former subtree root.
+
+The compiled code for rb_erase_augmented() may inline the propagation and
+copy callbacks, which results in a large function, so each augmented rbtree
+user should have a single rb_erase_augmented() call site in order to limit
+compiled code size.
+
+
+Sample usage
+^^^^^^^^^^^^
+
+Interval tree is an example of augmented rb tree. Reference -
+"Introduction to Algorithms" by Cormen, Leiserson, Rivest and Stein.
+More details about interval trees:
+
+Classical rbtree has a single key and it cannot be directly used to store
+interval ranges like [lo:hi] and do a quick lookup for any overlap with a new
+lo:hi or to find whether there is an exact match for a new lo:hi.
+
+However, rbtree can be augmented to store such interval ranges in a structured
+way making it possible to do efficient lookup and exact match.
+
+This "extra information" stored in each node is the maximum hi
+(max_hi) value among all the nodes that are its descendants. This
+information can be maintained at each node just be looking at the node
+and its immediate children. And this will be used in O(log n) lookup
+for lowest match (lowest start address among all possible matches)
+with something like::
+
+  struct interval_tree_node *
+  interval_tree_first_match(struct rb_root *root,
+			    unsigned long start, unsigned long last)
+  {
+	struct interval_tree_node *node;
+
+	if (!root->rb_node)
+		return NULL;
+	node = rb_entry(root->rb_node, struct interval_tree_node, rb);
+
+	while (true) {
+		if (node->rb.rb_left) {
+			struct interval_tree_node *left =
+				rb_entry(node->rb.rb_left,
+					 struct interval_tree_node, rb);
+			if (left->__subtree_last >= start) {
+				/*
+				 * Some nodes in left subtree satisfy Cond2.
+				 * Iterate to find the leftmost such node N.
+				 * If it also satisfies Cond1, that's the match
+				 * we are looking for. Otherwise, there is no
+				 * matching interval as nodes to the right of N
+				 * can't satisfy Cond1 either.
+				 */
+				node = left;
+				continue;
+			}
+		}
+		if (node->start <= last) {		/* Cond1 */
+			if (node->last >= start)	/* Cond2 */
+				return node;	/* node is leftmost match */
+			if (node->rb.rb_right) {
+				node = rb_entry(node->rb.rb_right,
+					struct interval_tree_node, rb);
+				if (node->__subtree_last >= start)
+					continue;
+			}
+		}
+		return NULL;	/* No match */
+	}
+  }
+
+Insertion/removal are defined using the following augmented callbacks::
+
+  static inline unsigned long
+  compute_subtree_last(struct interval_tree_node *node)
+  {
+	unsigned long max = node->last, subtree_last;
+	if (node->rb.rb_left) {
+		subtree_last = rb_entry(node->rb.rb_left,
+			struct interval_tree_node, rb)->__subtree_last;
+		if (max < subtree_last)
+			max = subtree_last;
+	}
+	if (node->rb.rb_right) {
+		subtree_last = rb_entry(node->rb.rb_right,
+			struct interval_tree_node, rb)->__subtree_last;
+		if (max < subtree_last)
+			max = subtree_last;
+	}
+	return max;
+  }
+
+  static void augment_propagate(struct rb_node *rb, struct rb_node *stop)
+  {
+	while (rb != stop) {
+		struct interval_tree_node *node =
+			rb_entry(rb, struct interval_tree_node, rb);
+		unsigned long subtree_last = compute_subtree_last(node);
+		if (node->__subtree_last == subtree_last)
+			break;
+		node->__subtree_last = subtree_last;
+		rb = rb_parent(&node->rb);
+	}
+  }
+
+  static void augment_copy(struct rb_node *rb_old, struct rb_node *rb_new)
+  {
+	struct interval_tree_node *old =
+		rb_entry(rb_old, struct interval_tree_node, rb);
+	struct interval_tree_node *new =
+		rb_entry(rb_new, struct interval_tree_node, rb);
+
+	new->__subtree_last = old->__subtree_last;
+  }
+
+  static void augment_rotate(struct rb_node *rb_old, struct rb_node *rb_new)
+  {
+	struct interval_tree_node *old =
+		rb_entry(rb_old, struct interval_tree_node, rb);
+	struct interval_tree_node *new =
+		rb_entry(rb_new, struct interval_tree_node, rb);
+
+	new->__subtree_last = old->__subtree_last;
+	old->__subtree_last = compute_subtree_last(old);
+  }
+
+  static const struct rb_augment_callbacks augment_callbacks = {
+	augment_propagate, augment_copy, augment_rotate
+  };
+
+  void interval_tree_insert(struct interval_tree_node *node,
+			    struct rb_root *root)
+  {
+	struct rb_node **link = &root->rb_node, *rb_parent = NULL;
+	unsigned long start = node->start, last = node->last;
+	struct interval_tree_node *parent;
+
+	while (*link) {
+		rb_parent = *link;
+		parent = rb_entry(rb_parent, struct interval_tree_node, rb);
+		if (parent->__subtree_last < last)
+			parent->__subtree_last = last;
+		if (start < parent->start)
+			link = &parent->rb.rb_left;
+		else
+			link = &parent->rb.rb_right;
+	}
+
+	node->__subtree_last = last;
+	rb_link_node(&node->rb, rb_parent, link);
+	rb_insert_augmented(&node->rb, root, &augment_callbacks);
+  }
+
+  void interval_tree_remove(struct interval_tree_node *node,
+			    struct rb_root *root)
+  {
+	rb_erase_augmented(&node->rb, root, &augment_callbacks);
+  }
diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst
index 640934b6f7b4..62f62540bea2 100644
--- a/Documentation/core-api/xarray.rst
+++ b/Documentation/core-api/xarray.rst
@@ -390,12 +390,13 @@ The xas_create_range() function allocates all the necessary memory
 to store every entry in a range.  It will set ENOMEM in the xa_state if
 it cannot allocate memory.
 
-You can use xas_init_marks() to reset the marks on an entry
-to their default state.  This is usually all marks clear, unless the
-XArray is marked with ``XA_FLAGS_TRACK_FREE``, in which case mark 0 is set
-and all other marks are clear.  Replacing one entry with another using
-xas_store() will not reset the marks on that entry; if you want
-the marks reset, you should do that explicitly.
+You can use xas_init_marks() to reset the marks on an entry to their
+default state.  This is usually all marks clear, unless the XArray is
+marked with ``XA_FLAGS_TRACK_FREE``, in which case mark 0 is set and all
+other marks are clear.  Replacing one entry with another using xas_store()
+will not reset the marks on that entry; if you want the marks reset, you
+should do that explicitly.  If you know that the marks are initialised,
+you can use __xas_store() when storing ``NULL``.
 
 The xas_load() will walk the xa_state as close to the entry
 as it can.  If you know the xa_state has already been walked to the
diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst
index 09dee10d2592..f7809c7b1ba9 100644
--- a/Documentation/dev-tools/index.rst
+++ b/Documentation/dev-tools/index.rst
@@ -21,6 +21,7 @@ whole; patches welcome!
    kasan
    ubsan
    kmemleak
+   kcsan
    gdb-kernel-debugging
    kgdb
    kselftest
diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst
index 1c4e1825d769..8548b0b04e43 100644
--- a/Documentation/dev-tools/kcov.rst
+++ b/Documentation/dev-tools/kcov.rst
@@ -217,14 +217,15 @@ This allows to collect coverage from two types of kernel background
 threads: the global ones, that are spawned during kernel boot in a limited
 number of instances (e.g. one USB hub_event() worker thread is spawned per
 USB HCD); and the local ones, that are spawned when a user interacts with
-some kernel interface (e.g. vhost workers).
+some kernel interface (e.g. vhost workers); as well as from soft
+interrupts.
 
-To enable collecting coverage from a global background thread, a unique
-global handle must be assigned and passed to the corresponding
-kcov_remote_start() call. Then a userspace process can pass a list of such
-handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field of the
-kcov_remote_arg struct. This will attach the used kcov device to the code
-sections, that are referenced by those handles.
+To enable collecting coverage from a global background thread or from a
+softirq, a unique global handle must be assigned and passed to the
+corresponding kcov_remote_start() call. Then a userspace process can pass
+a list of such handles to the KCOV_REMOTE_ENABLE ioctl in the handles
+array field of the kcov_remote_arg struct. This will attach the used kcov
+device to the code sections, that are referenced by those handles.
 
 Since there might be many local background threads spawned from different
 userspace processes, we can't use a single global handle per annotation.
@@ -242,7 +243,7 @@ handles as they don't belong to a particular subsystem. The bytes 4-7 are
 currently reserved and must be zero. In the future the number of bytes
 used for the subsystem or handle ids might be increased.
 
-When a particular userspace proccess collects coverage by via a common
+When a particular userspace proccess collects coverage via a common
 handle, kcov will collect coverage for each code section that is annotated
 to use the common handle obtained as kcov_handle from the current
 task_struct. However non common handles allow to collect coverage
diff --git a/Documentation/dev-tools/kcsan.rst b/Documentation/dev-tools/kcsan.rst
new file mode 100644
index 000000000000..f4b5766f12cc
--- /dev/null
+++ b/Documentation/dev-tools/kcsan.rst
@@ -0,0 +1,328 @@
+The Kernel Concurrency Sanitizer (KCSAN)
+========================================
+
+The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector, which
+relies on compile-time instrumentation, and uses a watchpoint-based sampling
+approach to detect races. KCSAN's primary purpose is to detect `data races`_.
+
+Usage
+-----
+
+KCSAN is supported in both GCC and Clang. With GCC it requires version 7.3.0 or
+later. With Clang it requires version 7.0.0 or later.
+
+To enable KCSAN configure the kernel with::
+
+    CONFIG_KCSAN = y
+
+KCSAN provides several other configuration options to customize behaviour (see
+the respective help text in ``lib/Kconfig.kcsan`` for more info).
+
+Error reports
+~~~~~~~~~~~~~
+
+A typical data race report looks like this::
+
+    ==================================================================
+    BUG: KCSAN: data-race in generic_permission / kernfs_refresh_inode
+
+    write to 0xffff8fee4c40700c of 4 bytes by task 175 on cpu 4:
+     kernfs_refresh_inode+0x70/0x170
+     kernfs_iop_permission+0x4f/0x90
+     inode_permission+0x190/0x200
+     link_path_walk.part.0+0x503/0x8e0
+     path_lookupat.isra.0+0x69/0x4d0
+     filename_lookup+0x136/0x280
+     user_path_at_empty+0x47/0x60
+     vfs_statx+0x9b/0x130
+     __do_sys_newlstat+0x50/0xb0
+     __x64_sys_newlstat+0x37/0x50
+     do_syscall_64+0x85/0x260
+     entry_SYSCALL_64_after_hwframe+0x44/0xa9
+
+    read to 0xffff8fee4c40700c of 4 bytes by task 166 on cpu 6:
+     generic_permission+0x5b/0x2a0
+     kernfs_iop_permission+0x66/0x90
+     inode_permission+0x190/0x200
+     link_path_walk.part.0+0x503/0x8e0
+     path_lookupat.isra.0+0x69/0x4d0
+     filename_lookup+0x136/0x280
+     user_path_at_empty+0x47/0x60
+     do_faccessat+0x11a/0x390
+     __x64_sys_access+0x3c/0x50
+     do_syscall_64+0x85/0x260
+     entry_SYSCALL_64_after_hwframe+0x44/0xa9
+
+    Reported by Kernel Concurrency Sanitizer on:
+    CPU: 6 PID: 166 Comm: systemd-journal Not tainted 5.3.0-rc7+ #1
+    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
+    ==================================================================
+
+The header of the report provides a short summary of the functions involved in
+the race. It is followed by the access types and stack traces of the 2 threads
+involved in the data race.
+
+The other less common type of data race report looks like this::
+
+    ==================================================================
+    BUG: KCSAN: data-race in e1000_clean_rx_irq+0x551/0xb10
+
+    race at unknown origin, with read to 0xffff933db8a2ae6c of 1 bytes by interrupt on cpu 0:
+     e1000_clean_rx_irq+0x551/0xb10
+     e1000_clean+0x533/0xda0
+     net_rx_action+0x329/0x900
+     __do_softirq+0xdb/0x2db
+     irq_exit+0x9b/0xa0
+     do_IRQ+0x9c/0xf0
+     ret_from_intr+0x0/0x18
+     default_idle+0x3f/0x220
+     arch_cpu_idle+0x21/0x30
+     do_idle+0x1df/0x230
+     cpu_startup_entry+0x14/0x20
+     rest_init+0xc5/0xcb
+     arch_call_rest_init+0x13/0x2b
+     start_kernel+0x6db/0x700
+
+    Reported by Kernel Concurrency Sanitizer on:
+    CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc7+ #2
+    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
+    ==================================================================
+
+This report is generated where it was not possible to determine the other
+racing thread, but a race was inferred due to the data value of the watched
+memory location having changed. These can occur either due to missing
+instrumentation or e.g. DMA accesses. These reports will only be generated if
+``CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN=y`` (selected by default).
+
+Selective analysis
+~~~~~~~~~~~~~~~~~~
+
+It may be desirable to disable data race detection for specific accesses,
+functions, compilation units, or entire subsystems.  For static blacklisting,
+the below options are available:
+
+* KCSAN understands the ``data_race(expr)`` annotation, which tells KCSAN that
+  any data races due to accesses in ``expr`` should be ignored and resulting
+  behaviour when encountering a data race is deemed safe.
+
+* Disabling data race detection for entire functions can be accomplished by
+  using the function attribute ``__no_kcsan``::
+
+    __no_kcsan
+    void foo(void) {
+        ...
+
+  To dynamically limit for which functions to generate reports, see the
+  `DebugFS interface`_ blacklist/whitelist feature.
+
+  For ``__always_inline`` functions, replace ``__always_inline`` with
+  ``__no_kcsan_or_inline`` (which implies ``__always_inline``)::
+
+    static __no_kcsan_or_inline void foo(void) {
+        ...
+
+  Note: Older compiler versions (GCC < 9) also do not always honor the
+  ``__no_kcsan`` attribute on regular ``inline`` functions. If false positives
+  with these compilers cannot be tolerated, for small functions where
+  ``__always_inline`` would be appropriate, ``__no_kcsan_or_inline`` should be
+  preferred instead.
+
+* To disable data race detection for a particular compilation unit, add to the
+  ``Makefile``::
+
+    KCSAN_SANITIZE_file.o := n
+
+* To disable data race detection for all compilation units listed in a
+  ``Makefile``, add to the respective ``Makefile``::
+
+    KCSAN_SANITIZE := n
+
+Furthermore, it is possible to tell KCSAN to show or hide entire classes of
+data races, depending on preferences. These can be changed via the following
+Kconfig options:
+
+* ``CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY``: If enabled and a conflicting write
+  is observed via a watchpoint, but the data value of the memory location was
+  observed to remain unchanged, do not report the data race.
+
+* ``CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC``: Assume that plain aligned writes
+  up to word size are atomic by default. Assumes that such writes are not
+  subject to unsafe compiler optimizations resulting in data races. The option
+  causes KCSAN to not report data races due to conflicts where the only plain
+  accesses are aligned writes up to word size.
+
+DebugFS interface
+~~~~~~~~~~~~~~~~~
+
+The file ``/sys/kernel/debug/kcsan`` provides the following interface:
+
+* Reading ``/sys/kernel/debug/kcsan`` returns various runtime statistics.
+
+* Writing ``on`` or ``off`` to ``/sys/kernel/debug/kcsan`` allows turning KCSAN
+  on or off, respectively.
+
+* Writing ``!some_func_name`` to ``/sys/kernel/debug/kcsan`` adds
+  ``some_func_name`` to the report filter list, which (by default) blacklists
+  reporting data races where either one of the top stackframes are a function
+  in the list.
+
+* Writing either ``blacklist`` or ``whitelist`` to ``/sys/kernel/debug/kcsan``
+  changes the report filtering behaviour. For example, the blacklist feature
+  can be used to silence frequently occurring data races; the whitelist feature
+  can help with reproduction and testing of fixes.
+
+Tuning performance
+~~~~~~~~~~~~~~~~~~
+
+Core parameters that affect KCSAN's overall performance and bug detection
+ability are exposed as kernel command-line arguments whose defaults can also be
+changed via the corresponding Kconfig options.
+
+* ``kcsan.skip_watch`` (``CONFIG_KCSAN_SKIP_WATCH``): Number of per-CPU memory
+  operations to skip, before another watchpoint is set up. Setting up
+  watchpoints more frequently will result in the likelihood of races to be
+  observed to increase. This parameter has the most significant impact on
+  overall system performance and race detection ability.
+
+* ``kcsan.udelay_task`` (``CONFIG_KCSAN_UDELAY_TASK``): For tasks, the
+  microsecond delay to stall execution after a watchpoint has been set up.
+  Larger values result in the window in which we may observe a race to
+  increase.
+
+* ``kcsan.udelay_interrupt`` (``CONFIG_KCSAN_UDELAY_INTERRUPT``): For
+  interrupts, the microsecond delay to stall execution after a watchpoint has
+  been set up. Interrupts have tighter latency requirements, and their delay
+  should generally be smaller than the one chosen for tasks.
+
+They may be tweaked at runtime via ``/sys/module/kcsan/parameters/``.
+
+Data Races
+----------
+
+In an execution, two memory accesses form a *data race* if they *conflict*,
+they happen concurrently in different threads, and at least one of them is a
+*plain access*; they *conflict* if both access the same memory location, and at
+least one is a write. For a more thorough discussion and definition, see `"Plain
+Accesses and Data Races" in the LKMM`_.
+
+.. _"Plain Accesses and Data Races" in the LKMM: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/memory-model/Documentation/explanation.txt#n1922
+
+Relationship with the Linux-Kernel Memory Consistency Model (LKMM)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The LKMM defines the propagation and ordering rules of various memory
+operations, which gives developers the ability to reason about concurrent code.
+Ultimately this allows to determine the possible executions of concurrent code,
+and if that code is free from data races.
+
+KCSAN is aware of *marked atomic operations* (``READ_ONCE``, ``WRITE_ONCE``,
+``atomic_*``, etc.), but is oblivious of any ordering guarantees and simply
+assumes that memory barriers are placed correctly. In other words, KCSAN
+assumes that as long as a plain access is not observed to race with another
+conflicting access, memory operations are correctly ordered.
+
+This means that KCSAN will not report *potential* data races due to missing
+memory ordering. Developers should therefore carefully consider the required
+memory ordering requirements that remain unchecked. If, however, missing
+memory ordering (that is observable with a particular compiler and
+architecture) leads to an observable data race (e.g. entering a critical
+section erroneously), KCSAN would report the resulting data race.
+
+Race Detection Beyond Data Races
+--------------------------------
+
+For code with complex concurrency design, race-condition bugs may not always
+manifest as data races. Race conditions occur if concurrently executing
+operations result in unexpected system behaviour. On the other hand, data races
+are defined at the C-language level. The following macros can be used to check
+properties of concurrent code where bugs would not manifest as data races.
+
+.. kernel-doc:: include/linux/kcsan-checks.h
+    :functions: ASSERT_EXCLUSIVE_WRITER ASSERT_EXCLUSIVE_WRITER_SCOPED
+                ASSERT_EXCLUSIVE_ACCESS ASSERT_EXCLUSIVE_ACCESS_SCOPED
+                ASSERT_EXCLUSIVE_BITS
+
+Implementation Details
+----------------------
+
+KCSAN relies on observing that two accesses happen concurrently. Crucially, we
+want to (a) increase the chances of observing races (especially for races that
+manifest rarely), and (b) be able to actually observe them. We can accomplish
+(a) by injecting various delays, and (b) by using address watchpoints (or
+breakpoints).
+
+If we deliberately stall a memory access, while we have a watchpoint for its
+address set up, and then observe the watchpoint to fire, two accesses to the
+same address just raced. Using hardware watchpoints, this is the approach taken
+in `DataCollider
+<http://usenix.org/legacy/events/osdi10/tech/full_papers/Erickson.pdf>`_.
+Unlike DataCollider, KCSAN does not use hardware watchpoints, but instead
+relies on compiler instrumentation and "soft watchpoints".
+
+In KCSAN, watchpoints are implemented using an efficient encoding that stores
+access type, size, and address in a long; the benefits of using "soft
+watchpoints" are portability and greater flexibility. KCSAN then relies on the
+compiler instrumenting plain accesses. For each instrumented plain access:
+
+1. Check if a matching watchpoint exists; if yes, and at least one access is a
+   write, then we encountered a racing access.
+
+2. Periodically, if no matching watchpoint exists, set up a watchpoint and
+   stall for a small randomized delay.
+
+3. Also check the data value before the delay, and re-check the data value
+   after delay; if the values mismatch, we infer a race of unknown origin.
+
+To detect data races between plain and marked accesses, KCSAN also annotates
+marked accesses, but only to check if a watchpoint exists; i.e. KCSAN never
+sets up a watchpoint on marked accesses. By never setting up watchpoints for
+marked operations, if all accesses to a variable that is accessed concurrently
+are properly marked, KCSAN will never trigger a watchpoint and therefore never
+report the accesses.
+
+Key Properties
+~~~~~~~~~~~~~~
+
+1. **Memory Overhead:**  The overall memory overhead is only a few MiB
+   depending on configuration. The current implementation uses a small array of
+   longs to encode watchpoint information, which is negligible.
+
+2. **Performance Overhead:** KCSAN's runtime aims to be minimal, using an
+   efficient watchpoint encoding that does not require acquiring any shared
+   locks in the fast-path. For kernel boot on a system with 8 CPUs:
+
+   - 5.0x slow-down with the default KCSAN config;
+   - 2.8x slow-down from runtime fast-path overhead only (set very large
+     ``KCSAN_SKIP_WATCH`` and unset ``KCSAN_SKIP_WATCH_RANDOMIZE``).
+
+3. **Annotation Overheads:** Minimal annotations are required outside the KCSAN
+   runtime. As a result, maintenance overheads are minimal as the kernel
+   evolves.
+
+4. **Detects Racy Writes from Devices:** Due to checking data values upon
+   setting up watchpoints, racy writes from devices can also be detected.
+
+5. **Memory Ordering:** KCSAN is *not* explicitly aware of the LKMM's ordering
+   rules; this may result in missed data races (false negatives).
+
+6. **Analysis Accuracy:** For observed executions, due to using a sampling
+   strategy, the analysis is *unsound* (false negatives possible), but aims to
+   be complete (no false positives).
+
+Alternatives Considered
+-----------------------
+
+An alternative data race detection approach for the kernel can be found in the
+`Kernel Thread Sanitizer (KTSAN) <https://github.com/google/ktsan/wiki>`_.
+KTSAN is a happens-before data race detector, which explicitly establishes the
+happens-before order between memory operations, which can then be used to
+determine data races as defined in `Data Races`_.
+
+To build a correct happens-before relation, KTSAN must be aware of all ordering
+rules of the LKMM and synchronization primitives. Unfortunately, any omission
+leads to large numbers of false positives, which is especially detrimental in
+the context of the kernel which includes numerous custom synchronization
+mechanisms. To track the happens-before relation, KTSAN's implementation
+requires metadata for each memory location (shadow memory), which for each page
+corresponds to 4 pages of shadow memory, and can translate into overhead of
+tens of GiB on a large system.
diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
index 61ae13c44f91..5d1f56fcd2e7 100644
--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@@ -301,7 +301,8 @@ Helpers
 
 .. kernel-doc:: tools/testing/selftests/kselftest_harness.h
     :functions: TH_LOG TEST TEST_SIGNAL FIXTURE FIXTURE_DATA FIXTURE_SETUP
-                FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN
+                FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN FIXTURE_VARIANT
+                FIXTURE_VARIANT_ADD
 
 Operators
 ---------
diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
index 49e0362ddc11..b388c5aa7984 100644
--- a/Documentation/devicetree/bindings/arm/altera.yaml
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -13,8 +13,8 @@ properties:
   compatible:
     items:
       - enum:
-        - altr,socfpga-cyclone5
-        - altr,socfpga-arria5
-        - altr,socfpga-arria10
+          - altr,socfpga-cyclone5
+          - altr,socfpga-arria5
+          - altr,socfpga-arria10
       - const: altr,socfpga
 ...
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
index 66213bd95e6e..6cc74523ebfd 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -25,7 +25,7 @@ select:
 
 properties:
   compatible:
-   items:
+    items:
       - const: amlogic,meson-gx-ao-secure
       - const: syscon
 
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
index dc102c4e4a78..1f293ea24cd8 100644
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
@@ -14,7 +14,7 @@ Required properties:
 
 The scmi node with the following properties shall be under the /firmware/ node.
 
-- compatible : shall be "arm,scmi"
+- compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports
 - mboxes: List of phandle and mailbox channel specifiers. It should contain
 	  exactly one or two mailboxes, one for transmitting messages("tx")
 	  and another optional for receiving the notifications("rx") if
@@ -25,6 +25,7 @@ The scmi node with the following properties shall be under the /firmware/ node.
 	  protocol identifier for a given sub-node.
 - #size-cells : should be '0' as 'reg' property doesn't have any size
 	  associated with it.
+- arm,smc-id : SMC id required when using smc or hvc transports
 
 Optional properties:
 
diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml
index 0efdb4ac028e..5cd5b36cff2d 100644
--- a/Documentation/devicetree/bindings/arm/bitmain.yaml
+++ b/Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -13,6 +13,6 @@ properties:
   compatible:
     items:
       - enum:
-        - bitmain,sophon-edge
+          - bitmain,sophon-edge
       - const: bitmain,bm1880
 ...
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index a01814765ddb..44791d2b41c1 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -167,6 +167,7 @@ properties:
       - qcom,kryo260
       - qcom,kryo280
       - qcom,kryo385
+      - qcom,kryo468
       - qcom,kryo485
       - qcom,scorpion
 
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 623fedf12180..715047444391 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -108,7 +108,8 @@ This binding uses the i.MX common pinctrl binding[3].
 Required properties:
 - compatible:		Should be one of:
 			"fsl,imx8qm-iomuxc",
-			"fsl,imx8qxp-iomuxc".
+			"fsl,imx8qxp-iomuxc",
+			"fsl,imx8dxl-iomuxc".
 
 Required properties for Pinctrl sub nodes:
 - fsl,pins:		Each entry consists of 3 integers which represents
@@ -116,7 +117,8 @@ Required properties for Pinctrl sub nodes:
 			integers <pin_id mux_mode> are specified using a
 			PIN_FUNC_ID macro, which can be found in
 			<dt-bindings/pinctrl/pads-imx8qm.h>,
-			<dt-bindings/pinctrl/pads-imx8qxp.h>.
+			<dt-bindings/pinctrl/pads-imx8qxp.h>,
+			<dt-bindings/pinctrl/pads-imx8dxl.h>.
 			The last integer CONFIG is the pad setting value like
 			pull-up on this pin.
 
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index cd3fbe7e3948..05906e291e38 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -119,6 +119,7 @@ properties:
               - fsl,imx6q-sabreauto
               - fsl,imx6q-sabrelite
               - fsl,imx6q-sabresd
+              - kontron,imx6q-samx6i      # Kontron i.MX6 Dual/Quad SMARC Module
               - technexion,imx6q-pico-dwarf   # TechNexion i.MX6Q Pico-Dwarf
               - technexion,imx6q-pico-hobbit  # TechNexion i.MX6Q Pico-Hobbit
               - technexion,imx6q-pico-nymph   # TechNexion i.MX6Q Pico-Nymph
@@ -170,6 +171,7 @@ properties:
               - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base
               - fsl,imx6dl-sabreauto      # i.MX6 DualLite/Solo SABRE Automotive Board
               - fsl,imx6dl-sabresd        # i.MX6 DualLite SABRE Smart Device Board
+              - kontron,imx6dl-samx6i     # Kontron i.MX6 Solo SMARC Module
               - technexion,imx6dl-pico-dwarf   # TechNexion i.MX6DL Pico-Dwarf
               - technexion,imx6dl-pico-hobbit  # TechNexion i.MX6DL Pico-Hobbit
               - technexion,imx6dl-pico-nymph   # TechNexion i.MX6DL Pico-Nymph
@@ -177,7 +179,9 @@ properties:
               - technologic,imx6dl-ts4900
               - technologic,imx6dl-ts7970
               - toradex,colibri_imx6dl          # Colibri iMX6 Module
+              - toradex,colibri_imx6dl-v1_1     # Colibri iMX6 Module V1.1
               - toradex,colibri_imx6dl-eval-v3  # Colibri iMX6 Module on Colibri Evaluation Board V3
+              - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3
               - ysoft,imx6dl-yapp4-draco  # i.MX6 DualLite Y Soft IOTA Draco board
               - ysoft,imx6dl-yapp4-hydra  # i.MX6 DualLite Y Soft IOTA Hydra board
               - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 4043c5046441..abc544dde692 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -84,6 +84,28 @@ properties:
           - enum:
               - mediatek,mt8135-evbp1
           - const: mediatek,mt8135
+      - description: Google Elm (Acer Chromebook R13)
+        items:
+          - const: google,elm-rev8
+          - const: google,elm-rev7
+          - const: google,elm-rev6
+          - const: google,elm-rev5
+          - const: google,elm-rev4
+          - const: google,elm-rev3
+          - const: google,elm
+          - const: mediatek,mt8173
+      - description: Google Hana (Lenovo Chromebook N23 Yoga, C330, 300e,...)
+        items:
+          - const: google,hana-rev6
+          - const: google,hana-rev5
+          - const: google,hana-rev4
+          - const: google,hana-rev3
+          - const: google,hana
+          - const: mediatek,mt8173
+      - description: Google Hana rev7 (Poin2 Chromebook 11C)
+        items:
+          - const: google,hana-rev7
+          - const: mediatek,mt8173
       - items:
           - enum:
               - mediatek,mt8173-evb
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
index 301eefbe1618..8d6a9d98e7a6 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
@@ -1,7 +1,8 @@
 Mediatek mmsys controller
 ============================
 
-The Mediatek mmsys controller provides various clocks to the system.
+The Mediatek mmsys system controller provides clock control, routing control,
+and miscellaneous control in mmsys partition.
 
 Required Properties:
 
@@ -15,13 +16,13 @@ Required Properties:
 	- "mediatek,mt8183-mmsys", "syscon"
 - #clock-cells: Must be 1
 
-The mmsys controller uses the common clk binding from
+For the clock control, the mmsys controller uses the common clk binding from
 Documentation/devicetree/bindings/clock/clock-bindings.txt
 The available clocks are defined in dt-bindings/clock/mt*-clk.h.
 
 Example:
 
-mmsys: clock-controller@14000000 {
+mmsys: syscon@14000000 {
 	compatible = "mediatek,mt8173-mmsys", "syscon";
 	reg = <0 0x14000000 0 0x1000>;
 	#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
index 07f39d3eee7e..f7f024910e71 100644
--- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
+++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
@@ -17,9 +17,8 @@ properties:
           - nxp,lpc3230
           - nxp,lpc3240
       - items:
-        - enum:
-            - ea,ea3250
-            - phytec,phy3250
-        - const: nxp,lpc3250
-
+          - enum:
+              - ea,ea3250
+              - phytec,phy3250
+          - const: nxp,lpc3250
 ...
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 64ddae3bd39f..6031aee0f5a8 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -37,6 +37,8 @@ description: |
         msm8994
         msm8996
         sc7180
+        sdm630
+        sdm660
         sdm845
 
   The 'board' element must be one of the following strings:
@@ -153,6 +155,11 @@ properties:
               - qcom,sc7180-idp
           - const: qcom,sc7180
 
+      - items:
+          - enum:
+              - xiaomi,lavender
+          - const: qcom,sdm660
+
       - items:
           - enum:
               - qcom,ipq6018-cp01-c1
diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml
index ab59de17152d..845f9c76d6f7 100644
--- a/Documentation/devicetree/bindings/arm/realtek.yaml
+++ b/Documentation/devicetree/bindings/arm/realtek.yaml
@@ -14,6 +14,13 @@ properties:
     const: '/'
   compatible:
     oneOf:
+      # RTD1195 SoC based boards
+      - items:
+          - enum:
+              - mele,x1000 # MeLE X1000
+              - realtek,horseradish # Realtek Horseradish EVB
+          - const: realtek,rtd1195
+
       # RTD1293 SoC based boards
       - items:
           - enum:
@@ -25,6 +32,7 @@ properties:
           - enum:
               - mele,v9 # MeLE V9
               - probox2,ava # ProBox2 AVA
+              - xnano,x5 # Xnano X5
               - zidoo,x9s # Zidoo X9S
           - const: realtek,rtd1295
 
@@ -33,4 +41,17 @@ properties:
           - enum:
               - synology,ds418 # Synology DiskStation DS418
           - const: realtek,rtd1296
+
+      # RTD1395 SoC based boards
+      - items:
+          - enum:
+              - bananapi,bpi-m4 # Banana Pi BPI-M4
+              - realtek,lion-skin # Realtek Lion Skin EVB
+          - const: realtek,rtd1395
+
+      # RTD1619 SoC based boards
+      - items:
+          - enum:
+              - realtek,mjolnir # Realtek Mjolnir EVB
+          - const: realtek,rtd1619
 ...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 715586dea9bb..d4a4045092df 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -358,6 +358,11 @@ properties:
           - const: haoyu,marsboard-rk3066
           - const: rockchip,rk3066a
 
+      - description: Hardkernel Odroid Go Advance
+        items:
+          - const: hardkernel,rk3326-odroid-go2
+          - const: rockchip,rk3326
+
       - description: Hugsun X99 TV Box
         items:
           - const: hugsun,x99
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index 63acd57c4799..eb92f9eefaba 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -52,6 +52,7 @@ properties:
         items:
           - enum:
               - insignal,origen                 # Insignal Origen
+              - samsung,i9100                   # Samsung Galaxy S2 (GT-I9100)
               - samsung,smdkv310                # Samsung SMDKV310 eval
               - samsung,trats                   # Samsung Tizen Reference
               - samsung,universal_c210          # Samsung C210
diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
index 65ad6d8a3c99..113f93b9ae55 100644
--- a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
+++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
@@ -17,45 +17,45 @@ properties:
       - description: LD4 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld4-ref
+              - socionext,uniphier-ld4-ref
           - const: socionext,uniphier-ld4
       - description: Pro4 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pro4-ace
-            - socionext,uniphier-pro4-ref
-            - socionext,uniphier-pro4-sanji
+              - socionext,uniphier-pro4-ace
+              - socionext,uniphier-pro4-ref
+              - socionext,uniphier-pro4-sanji
           - const: socionext,uniphier-pro4
       - description: sLD8 SoC boards
         items:
           - enum:
-            - socionext,uniphier-sld8-ref
+              - socionext,uniphier-sld8-ref
           - const: socionext,uniphier-sld8
       - description: PXs2 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pxs2-gentil
-            - socionext,uniphier-pxs2-vodka
+              - socionext,uniphier-pxs2-gentil
+              - socionext,uniphier-pxs2-vodka
           - const: socionext,uniphier-pxs2
       - description: LD6b SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld6b-ref
+              - socionext,uniphier-ld6b-ref
           - const: socionext,uniphier-ld6b
       - description: LD11 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld11-global
-            - socionext,uniphier-ld11-ref
+              - socionext,uniphier-ld11-global
+              - socionext,uniphier-ld11-ref
           - const: socionext,uniphier-ld11
       - description: LD20 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld20-global
-            - socionext,uniphier-ld20-ref
+              - socionext,uniphier-ld20-global
+              - socionext,uniphier-ld20-ref
           - const: socionext,uniphier-ld20
       - description: PXs3 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pxs3-ref
+              - socionext,uniphier-pxs3-ref
           - const: socionext,uniphier-pxs3
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
index 55f7938c4826..9f276bc9efa0 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -20,7 +20,7 @@ description: |
   [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
 
 allOf:
- - $ref: /schemas/simple-bus.yaml#
+  - $ref: /schemas/simple-bus.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index baff80197d5a..cf5db5e273f3 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -14,9 +14,9 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32mp157-syscfg
-        - const: syscon
+          - enum:
+              - st,stm32mp157-syscfg
+          - const: syscon
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index abf2d97fb7ae..87817ff0cd35 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -561,6 +561,11 @@ properties:
           - const: olimex,a20-olinuxino-lime
           - const: allwinner,sun7i-a20
 
+      - description: Olimex A20-OlinuXino LIME (with eMMC)
+        items:
+          - const: olimex,a20-olinuxino-lime-emmc
+          - const: allwinner,sun7i-a20
+
       - description: Olimex A20-OlinuXino LIME2
         items:
           - const: olimex,a20-olinuxino-lime2
diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
index bfc6357476fd..6451928dd2ce 100644
--- a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
+++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
@@ -26,8 +26,8 @@ properties:
     oneOf:
       - const: faraday,ftide010
       - items:
-        - const: cortina,gemini-pata
-        - const: faraday,ftide010
+          - const: cortina,gemini-pata
+          - const: faraday,ftide010
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
index 80973619342d..32d33b983d66 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -21,8 +21,8 @@ properties:
     oneOf:
       - const: allwinner,sun8i-a23-rsb
       - items:
-        - const: allwinner,sun8i-a83t-rsb
-        - const: allwinner,sun8i-a23-rsb
+          - const: allwinner,sun8i-a83t-rsb
+          - const: allwinner,sun8i-a23-rsb
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
index ed1b2126a81b..9a37a357cb4e 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -52,12 +52,12 @@ properties:
       - const: allwinner,sun4i-a10-dram-gates-clk
 
       - items:
-        - const: allwinner,sun5i-a13-dram-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun5i-a13-dram-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
       - items:
-        - const: allwinner,sun8i-h3-apb0-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun8i-h3-apb0-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
index a203d5d498db..8141f22410dd 100644
--- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -28,15 +28,14 @@ properties:
     const: 0
 
   fsl,vco-hz:
-     description: Optional for VCO frequency of the PLL in Hertz.
-        The VCO frequency of this PLL cannot be changed during runtime
-        only at startup. Therefore, the output frequencies are very
-        limited and might not even closely match the requested frequency.
-        To work around this restriction the user may specify its own
-        desired VCO frequency for the PLL.
-     minimum: 650000000
-     maximum: 1300000000
-     default: 1188000000
+    description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+      of this PLL cannot be changed during runtime only at startup. Therefore,
+      the output frequencies are very limited and might not even closely match
+      the requested frequency. To work around this restriction the user may specify
+      its own desired VCO frequency for the PLL.
+    minimum: 650000000
+    maximum: 1300000000
+    default: 1188000000
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index f684fe67db84..acc31b3991bd 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -15,15 +15,15 @@ description: |
   power domains.
 
 properties:
-  compatible :
+  compatible:
     enum:
-       - qcom,mmcc-apq8064
-       - qcom,mmcc-apq8084
-       - qcom,mmcc-msm8660
-       - qcom,mmcc-msm8960
-       - qcom,mmcc-msm8974
-       - qcom,mmcc-msm8996
-       - qcom,mmcc-msm8998
+      - qcom,mmcc-apq8064
+      - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8660
+      - qcom,mmcc-msm8960
+      - qcom,mmcc-msm8974
+      - qcom,mmcc-msm8996
+      - qcom,mmcc-msm8998
 
   clocks:
     items:
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 4638d7adb806..369c58e22a06 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -144,7 +144,7 @@ required:
 
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
-  - |+
+  - |
     muic-max77843 {
       usb_con1: connector {
         compatible = "usb-b-connector";
@@ -156,7 +156,7 @@ examples:
   # USB-C connector attached to CC controller (s2mm005), HS lines routed
   # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
   # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-  - |+
+  - |
     ccic: s2mm005 {
       usb_con2: connector {
         compatible = "usb-c-connector";
@@ -190,7 +190,7 @@ examples:
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
   # power delivery support and enables drp.
-  - |+
+  - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
       usb_con3: connector {
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index 8b9a8f337f16..fc823572bcff 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -15,16 +15,16 @@ properties:
     oneOf:
       - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun5i-a13-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun5i-a13-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun6i-a31-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun6i-a31-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun7i-a20-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun7i-a20-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun8i-a33-crypto
+          - const: allwinner,sun8i-a33-crypto
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
index 2c459b8c76ff..7a60d84289cc 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
@@ -50,16 +50,16 @@ if:
         const: allwinner,sun50i-h6-crypto
 then:
   properties:
-      clocks:
-        minItems: 3
-      clock-names:
-        minItems: 3
+    clocks:
+      minItems: 3
+    clock-names:
+      minItems: 3
 else:
   properties:
-      clocks:
-        maxItems: 2
-      clock-names:
-        maxItems: 2
+    clocks:
+      maxItems: 2
+    clock-names:
+      maxItems: 2
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
index 5becc60a0e28..385b23d255c3 100644
--- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
@@ -12,7 +12,7 @@ maintainers:
 properties:
   compatible:
     items:
-    - const: amlogic,gxl-crypto
+      - const: amlogic,gxl-crypto
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
index 5d4915aed1e2..75e6479397a5 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -21,8 +21,8 @@ properties:
       - const: allwinner,sun5i-a10s-hdmi
       - const: allwinner,sun6i-a31-hdmi
       - items:
-        - const: allwinner,sun7i-a20-hdmi
-        - const: allwinner,sun5i-a10s-hdmi
+          - const: allwinner,sun7i-a20-hdmi
+          - const: allwinner,sun5i-a10s-hdmi
 
   reg:
     maxItems: 1
@@ -33,32 +33,32 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The first video PLL
+          - description: The second video PLL
 
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The HDMI DDC clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The HDMI DDC clock
+          - description: The first video PLL
+          - description: The second video PLL
 
   clock-names:
     oneOf:
       - items:
-        - const: ahb
-        - const: mod
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: pll-0
+          - const: pll-1
 
       - items:
-        - const: ahb
-        - const: mod
-        - const: ddc
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: ddc
+          - const: pll-0
+          - const: pll-1
 
   resets:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
index e5344c4ae226..87cb77b32ee3 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -35,26 +35,26 @@ properties:
       - const: allwinner,sun9i-a80-tcon-tv
 
       - items:
-        - enum:
-          - allwinner,sun7i-a20-tcon0
-          - allwinner,sun7i-a20-tcon1
-        - const: allwinner,sun7i-a20-tcon
+          - enum:
+              - allwinner,sun7i-a20-tcon0
+              - allwinner,sun7i-a20-tcon1
+          - const: allwinner,sun7i-a20-tcon
 
       - items:
-        - enum:
-            - allwinner,sun50i-a64-tcon-lcd
-        - const: allwinner,sun8i-a83t-tcon-lcd
+          - enum:
+              - allwinner,sun50i-a64-tcon-lcd
+          - const: allwinner,sun8i-a83t-tcon-lcd
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-tcon-tv
-          - allwinner,sun50i-a64-tcon-tv
-        - const: allwinner,sun8i-a83t-tcon-tv
+          - enum:
+              - allwinner,sun8i-h3-tcon-tv
+              - allwinner,sun50i-a64-tcon-tv
+          - const: allwinner,sun8i-a83t-tcon-tv
 
       - items:
-        - enum:
-          - allwinner,sun50i-h6-tcon-tv
-        - const: allwinner,sun8i-r40-tcon-tv
+          - enum:
+              - allwinner,sun50i-h6-tcon-tv
+          - const: allwinner,sun8i-r40-tcon-tv
 
   reg:
     maxItems: 1
@@ -83,37 +83,37 @@ properties:
   resets:
     anyOf:
       - items:
-        - description: TCON Reset Line
+          - description: TCON Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON LVDS Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
+          - description: TCON LVDS Reset Line
 
   reset-names:
     oneOf:
       - const: lcd
 
       - items:
-        - const: lcd
-        - const: lvds
+          - const: lcd
+          - const: lvds
 
       - items:
-        - const: lcd
-        - const: edp
+          - const: lcd
+          - const: edp
 
       - items:
-        - const: lcd
-        - const: edp
-        - const: lvds
+          - const: lcd
+          - const: edp
+          - const: lvds
 
   ports:
     type: object
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index 9e90c2b00960..63f948175239 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -76,28 +76,28 @@ required:
 allOf:
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun6i-a31-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 2
+      properties:
+        clocks:
+          minItems: 2
 
-        required:
-          - clock-names
+      required:
+        - clock-names
 
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun50i-a64-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun50i-a64-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 1
+      properties:
+        clocks:
+          minItems: 1
 
 additionalProperties: false
 
@@ -119,7 +119,7 @@ examples:
         panel@0 {
                 compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
                 reg = <0>;
-                power-gpios = <&pio 1 7 0>; /* PB07 */
+                power-supply = <&reg_display>;
                 reset-gpios = <&r_pio 0 5 1>; /* PL05 */
                 backlight = <&pwm_bl>;
         };
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 4d6795690ac3..fa4769a0b26e 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -29,11 +29,11 @@ properties:
       - const: allwinner,sun50i-h6-dw-hdmi
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-dw-hdmi
-          - allwinner,sun8i-r40-dw-hdmi
-          - allwinner,sun50i-a64-dw-hdmi
-        - const: allwinner,sun8i-a83t-dw-hdmi
+          - enum:
+              - allwinner,sun8i-h3-dw-hdmi
+              - allwinner,sun8i-r40-dw-hdmi
+              - allwinner,sun50i-a64-dw-hdmi
+          - const: allwinner,sun8i-a83t-dw-hdmi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 8f373029f5d2..e737951f5873 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -32,17 +32,17 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - ti,ds90c185       # For the TI DS90C185 FPD-Link Serializer
-          - ti,ds90c187       # For the TI DS90C187 FPD-Link Serializer
-          - ti,sn75lvds83     # For the TI SN75LVDS83 FlatLink transmitter
-        - const: lvds-encoder # Generic LVDS encoder compatible fallback
+          - enum:
+              - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
+              - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
+              - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
+          - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
-        - enum:
-          - ti,ds90cf384a     # For the DS90CF384A FPD-Link LVDS Receiver
-        - const: lvds-decoder # Generic LVDS decoders compatible fallback
+          - enum:
+              - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+          - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
-        - thine,thc63lvdm83d  # For the THC63LVDM83D LVDS serializer
+          - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
 
   ports:
     type: object
diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
new file mode 100644
index 000000000000..8aff2d68fc33
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Northwest Logic MIPI-DSI controller on i.MX SoCs
+
+maintainers:
+  - Guido Gúnther <agx@sigxcpu.org>
+  - Robert Chiras <robert.chiras@nxp.com>
+
+description: |
+  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
+  the SOCs NWL MIPI-DSI host controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mq-nwl-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: DSI core clock
+      - description: RX_ESC clock (used in escape mode)
+      - description: TX_ESC clock (used in escape mode)
+      - description: PHY_REF clock
+      - description: LCDIF clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: rx_esc
+      - const: tx_esc
+      - const: phy_ref
+      - const: lcdif
+
+  mux-controls:
+    description:
+      mux controller node to use for operating the input mux
+
+  phys:
+    maxItems: 1
+    description:
+      A phandle to the phy module representing the DPHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: dsi byte reset line
+      - description: dsi dpi reset line
+      - description: dsi esc reset line
+      - description: dsi pclk reset line
+
+  reset-names:
+    items:
+      - const: byte
+      - const: dpi
+      - const: esc
+      - const: pclk
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/graph.txt.
+    properties:
+      port@0:
+        type: object
+        description:
+          Input port node to receive pixel data from the
+          display controller. Exactly one endpoint must be
+          specified.
+        properties:
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+          endpoint@0:
+            description: sub-node describing the input from LCDIF
+            type: object
+
+          endpoint@1:
+            description: sub-node describing the input from DCSS
+            type: object
+
+          reg:
+            const: 0
+
+        required:
+          - '#address-cells'
+          - '#size-cells'
+          - reg
+
+        oneOf:
+          - required:
+              - endpoint@0
+          - required:
+              - endpoint@1
+
+        additionalProperties: false
+
+      port@1:
+        type: object
+        description:
+          DSI output port node to the panel or the next bridge
+          in the chain
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    required:
+      - '#address-cells'
+      - '#size-cells'
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+patternProperties:
+  "^panel@[0-9]+$":
+    type: object
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - mux-controls
+  - phy-names
+  - phys
+  - ports
+  - reg
+  - reset-names
+  - resets
+
+additionalProperties: false
+
+examples:
+ - |
+
+   #include <dt-bindings/clock/imx8mq-clock.h>
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+   #include <dt-bindings/reset/imx8mq-reset.h>
+
+   mipi_dsi: mipi_dsi@30a00000 {
+              #address-cells = <1>;
+              #size-cells = <0>;
+              compatible = "fsl,imx8mq-nwl-dsi";
+              reg = <0x30A00000 0x300>;
+              clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+                       <&clk IMX8MQ_CLK_DSI_AHB>,
+                       <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+                       <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+                       <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+              clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+              interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+              mux-controls = <&mux 0>;
+              power-domains = <&pgc_mipi>;
+              resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+              reset-names = "byte", "dpi", "esc", "pclk";
+              phys = <&dphy>;
+              phy-names = "dphy";
+
+              panel@0 {
+                      #address-cells = <1>;
+                      #size-cells = <0>;
+                      compatible = "rocktech,jh057n00900";
+                      reg = <0>;
+                      port@0 {
+                           reg = <0>;
+                           panel_in: endpoint {
+                                     remote-endpoint = <&mipi_dsi_out>;
+                           };
+                      };
+              };
+
+              ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                           #size-cells = <0>;
+                           #address-cells = <1>;
+                           reg = <0>;
+                           mipi_dsi_in: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint = <&lcdif_mipi_dsi>;
+                           };
+                    };
+                    port@1 {
+                           reg = <1>;
+                           mipi_dsi_out: endpoint {
+                                         remote-endpoint = <&panel_in>;
+                           };
+                    };
+              };
+      };
diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml
index fd986c36c737..85b71b1fd28a 100644
--- a/Documentation/devicetree/bindings/display/dsi-controller.yaml
+++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml
@@ -28,7 +28,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "^dsi-controller(@.*)?$"
+    pattern: "^dsi(@.*)?$"
 
   "#address-cells":
     const: 1
@@ -76,7 +76,7 @@ patternProperties:
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    dsi-controller@a0351000 {
+    dsi@a0351000 {
         reg = <0xa0351000 0x1000>;
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
deleted file mode 100644
index 0601a9e34703..000000000000
--- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-ARM Versatile TFT Panels
-
-These panels are connected to the daughterboards found on the
-ARM Versatile reference designs.
-
-This device node must appear as a child to a "syscon"-compatible
-node.
-
-Required properties:
-- compatible: should be "arm,versatile-tft-panel"
-
-Required subnodes:
-- port: see display/panel/panel-common.yaml, graph.txt
-
-
-Example:
-
-sysreg@0 {
-	compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
-	reg = <0x00000 0x1000>;
-
-	panel: display@0 {
-		compatible = "arm,versatile-tft-panel";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&foo>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
new file mode 100644
index 000000000000..41fd5713c156
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,versatile-tft-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile TFT Panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  These panels are connected to the daughterboards found on the
+  ARM Versatile reference designs.
+
+  This device node must appear as a child to a "syscon"-compatible
+  node.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-tft-panel
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    sysreg {
+        compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+        reg = <0x00000 0x1000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel {
+            compatible = "arm,versatile-tft-panel";
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&foo>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
deleted file mode 100644
index 3caea2172b1b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Boe Himax8279d 1200x1920 TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,himax8279d8p" and one of: "boe,himax8279d10p"
-- reg: DSI virtual channel of the peripheral
-- enable-gpios: panel enable gpio
-- pp33-gpios: a GPIO phandle for the 3.3v pin that provides the supply voltage
-- pp18-gpios: a GPIO phandle for the 1.8v pin that provides the supply voltage
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	&mipi_dsi {
-		panel {
-			compatible = "boe,himax8279d8p", "boe,himax8279d10p";
-			reg = <0>;
-			backlight = <&backlight>;
-			enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
-			pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
new file mode 100644
index 000000000000..272a3a018a33
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,himax8279d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Boe Himax8279d 1200x1920 TFT LCD panel
+
+maintainers:
+  - Jerry Han <jerry.han.hq@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: boe,himax8279d8p
+      - const: boe,himax8279d10p
+
+  backlight: true
+  enable-gpios: true
+  reg: true
+
+  pp33-gpios:
+    maxItems: 1
+    description: GPIO for the 3.3v pin that provides the supply voltage
+
+  pp18-gpios:
+    maxItems: 1
+    description: GPIO for the 1.8v pin that provides the supply voltage
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp33-gpios
+  - pp18-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,himax8279d8p", "boe,himax8279d10p";
+            reg = <0>;
+            backlight = <&backlight>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+            pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index 740213459134..7f5df5851017 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -24,6 +24,8 @@ properties:
       - boe,tv101wum-n53
         # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
       - auo,b101uan08.3
+        # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel
+      - boe,tv105wum-nw0
 
   reg:
     description: the virtual channel number of a DSI peripheral
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
index c8c0c9cb0492..56903ded005e 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: display timing bindings
+title: display timings bindings
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -14,7 +14,7 @@ maintainers:
 description: |
   A display panel may be able to handle several display timings,
   with different resolutions.
-  The display-timings node makes it possible to specify the timing
+  The display-timings node makes it possible to specify the timings
   and to specify the timing that is native for the display.
 
 properties:
@@ -25,8 +25,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       The default display timing is the one specified as native-mode.
-      If no native-mode is specified then the first node is assumed the
-      native mode.
+      If no native-mode is specified then the first node is assumed
+      to be the native mode.
 
 patternProperties:
   "^timing":
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
deleted file mode 100644
index 82caa7b65ae8..000000000000
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
-
-Required properties:
-- compatible: must be "feiyang,fy07024di26a30d"
-- reg: DSI virtual channel used by that screen
-- avdd-supply: analog regulator dc1 switch
-- dvdd-supply: 3v3 digital regulator
-- reset-gpios: a GPIO phandle for the reset pin
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-panel@0 {
-	compatible = "feiyang,fy07024di26a30d";
-	reg = <0>;
-	avdd-supply = <&reg_dc1sw>;
-	dvdd-supply = <&reg_dldo2>;
-	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
-	backlight = <&backlight>;
-};
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
new file mode 100644
index 000000000000..95acf9e96f1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feiyang,fy07024di26a30d
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  avdd-supply:
+    description: analog regulator dc1 switch
+
+  dvdd-supply:
+    description: 3v3 digital regulator
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "feiyang,fy07024di26a30d";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt
deleted file mode 100644
index 3d5ce6ad6ec7..000000000000
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Ilitek ILI9322 TFT panel driver with SPI control bus
-
-This is a driver for 320x240 TFT panels, accepting a variety of input
-streams that get adapted and scaled to the panel. The panel output has
-960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
-VCOMH outputs.
-
-Required properties:
-  - compatible: "dlink,dir-685-panel", "ilitek,ili9322"
-    (full system-specific compatible is always required to look up configuration)
-  - reg: address of the panel on the SPI bus
-
-Optional properties:
-  - vcc-supply: core voltage supply, see regulator/regulator.txt
-  - iovcc-supply: voltage supply for the interface input/output signals,
-    see regulator/regulator.txt
-  - vci-supply: voltage supply for analog parts, see regulator/regulator.txt
-  - reset-gpios: a GPIO spec for the reset pin, see gpio/gpio.txt
-
-  The following optional properties only apply to RGB and YUV input modes and
-  can be omitted for BT.656 input modes:
-
-  - pixelclk-active: see display/panel/display-timing.txt
-  - de-active: see display/panel/display-timing.txt
-  - hsync-active: see display/panel/display-timing.txt
-  - vsync-active: see display/panel/display-timing.txt
-
-The panel must obey the rules for a SPI slave device as specified in
-spi/spi-bus.txt
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in
-media/video-interfaces.txt. This node should describe panel's video bus.
-
-Example:
-
-panel: display@0 {
-	compatible = "dlink,dir-685-panel", "ilitek,ili9322";
-	reg = <0>;
-	vcc-supply = <&vdisp>;
-	iovcc-supply = <&vdisp>;
-	vci-supply = <&vdisp>;
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&display_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
new file mode 100644
index 000000000000..177d48c5bd97
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9322.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9322 TFT panel driver with SPI control bus
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This is a driver for 320x240 TFT panels, accepting a variety of input
+  streams that get adapted and scaled to the panel. The panel output has
+  960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
+  VCOMH outputs.
+
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - dlink,dir-685-panel
+
+      - const: ilitek,ili9322
+
+  reset-gpios: true
+  port: true
+
+  vcc-supply:
+    description: Core voltage supply
+
+  iovcc-supply:
+    description: Voltage supply for the interface input/output signals
+
+  vci-supply:
+    description: Voltage supply for analog parts
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: display@0 {
+            compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+            reg = <0>;
+            vcc-supply = <&vdisp>;
+            iovcc-supply = <&vdisp>;
+            vci-supply = <&vdisp>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
deleted file mode 100644
index 4a041acb4e18..000000000000
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Ilitek ILI9881c based MIPI-DSI panels
-
-Required properties:
-  - compatible: must be "ilitek,ili9881c" and one of:
-    * "bananapi,lhr050h41"
-  - reg: DSI virtual channel used by that screen
-  - power-supply: phandle to the power regulator
-  - reset-gpios: a GPIO phandle for the reset pin
-
-Optional properties:
-  - backlight: phandle to the backlight used
-
-Example:
-panel@0 {
-	compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
-	reg = <0>;
-	power-supply = <&reg_display>;
-	reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
-	backlight = <&pwm_bl>;
-};
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
new file mode 100644
index 000000000000..a39332276bab
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9881c based MIPI-DSI panels
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - bananapi,lhr050h41
+
+      - const: ilitek,ili9881c
+
+  backlight: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - power-supply
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+            reg = <0>;
+            power-supply = <&reg_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&pwm_bl>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
deleted file mode 100644
index d1cab3a8f0fb..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,p097pfg"
-- reg: DSI virtual channel of the peripheral
-- avdd-supply: phandle of the regulator that provides positive voltage
-- avee-supply: phandle of the regulator that provides negative voltage
-- enable-gpios: panel enable gpio
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	&mipi_dsi {
-		panel@0 {
-			compatible = "innolux,p079zca";
-			reg = <0>;
-			avdd-supply = <...>;
-			avee-supply = <...>;
-			backlight = <&backlight>;
-			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
new file mode 100644
index 000000000000..5a5f071627fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,p097pfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+maintainers:
+  - Lin Huang <hl@rock-chips.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: innolux,p097pfg
+
+  backlight: true
+  enable-gpios: true
+  reg: true
+
+  avdd-supply:
+    description: The regulator that provides positive voltage
+
+  avee-supply:
+    description: The regulator that provides negative voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - avee-supply
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "innolux,p097pfg";
+            reg = <0>;
+            avdd-supply = <&avdd>;
+            avee-supply = <&avee>;
+            backlight = <&backlight>;
+            enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
deleted file mode 100644
index 513f03466aba..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Required properties:
-- compatible: should be "innolux,p120zdg-bf1"
-- power-supply: regulator to provide the supply voltage
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- no-hpd: If HPD isn't hooked up; add this property.
-
-Example:
-	panel_edp: panel-edp {
-		compatible = "innolux,p120zdg-bf1";
-		enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
-		power-supply = <&pm8916_l2>;
-		backlight = <&backlight>;
-		no-hpd;
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
new file mode 100644
index 000000000000..243dac2416f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,p120zdg-bf1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+
+maintainers:
+  - Sandeep Panda <spanda@codeaurora.org>
+  - Douglas Anderson <dianders@chromium.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: innolux,p120zdg-bf1
+
+  enable-gpios: true
+  power-supply: true
+  backlight: true
+  no-hpd: true
+
+required:
+  - compatible
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    panel_edp: panel-edp {
+        compatible = "innolux,p120zdg-bf1";
+        enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
+        power-supply = <&pm8916_l2>;
+        backlight = <&backlight>;
+        no-hpd;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
deleted file mode 100644
index 4989c91d505f..000000000000
--- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-JDI model LT070ME05000 1200x1920 7" DSI Panel
-
-Required properties:
-- compatible: should be "jdi,lt070me05000"
-- vddp-supply: phandle of the regulator that provides the supply voltage
-  Power IC supply (3-5V)
-- iovcc-supply: phandle of the regulator that provides the supply voltage
-  IOVCC , power supply for LCM (1.8V)
-- enable-gpios: phandle of gpio for enable line
-  LED_EN, LED backlight enable, High active
-- reset-gpios: phandle of gpio for reset line
-  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
-  XRES, Reset, Low active
-- dcdc-en-gpios: phandle of the gpio for power ic line
-  Power IC supply enable, High active
-
-Example:
-
-	dsi0: qcom,mdss_dsi@4700000 {
-		panel@0 {
-			compatible = "jdi,lt070me05000";
-			reg = <0>;
-
-			vddp-supply = <&pm8921_l17>;
-			iovcc-supply = <&pm8921_lvs7>;
-
-			enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
-			dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
new file mode 100644
index 000000000000..b8b9435e464c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+maintainers:
+  - Vinay Simha BN <simhavcs@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: jdi,lt070me05000
+
+  enable-gpios: true
+  reg: true
+  reset-gpios: true
+
+  vddp-supply:
+    description: |
+      The regulator that provides the supply voltage Power IC supply (3-5V)
+
+  iovcc-supply:
+    description: |
+      The regulator that provides the supply voltage IOVCC,
+      power supply for LCM (1.8V)
+
+  dcdc-en-gpios:
+    description: |
+      phandle of the gpio for power ic line
+      Power IC supply enable, High active
+
+required:
+  - compatible
+  - reg
+  - vddp-supply
+  - iovcc-supply
+  - enable-gpios
+  - reset-gpios
+  - dcdc-en-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "jdi,lt070me05000";
+            reg = <0>;
+
+            vddp-supply = <&pm8921_l17>;
+            iovcc-supply = <&pm8921_lvs7>;
+
+            enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+            dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
deleted file mode 100644
index fa9596082e44..000000000000
--- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
-
-Required properties:
-- compatible: should be "kingdisplay,kd035g6-54nt"
-- power-supply: See panel-common.txt
-- reset-gpios: See panel-common.txt
-
-Optional properties:
-- backlight: see panel-common.txt
-
-The generic bindings for the SPI slaves documented in [1] also apply.
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[2]: Documentation/devicetree/bindings/graph.txt
-
-Example:
-
-&spi {
-	panel@0 {
-		compatible = "kingdisplay,kd035g6-54nt";
-		reg = <0>;
-
-		spi-max-frequency = <3125000>;
-		spi-3wire;
-		spi-cs-high;
-
-		reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
-
-		backlight = <&backlight>;
-		power-supply = <&ldo6>;
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&panel_output>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
new file mode 100644
index 000000000000..6960036975fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd035g6-54nt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: kingdisplay,kd035g6-54nt
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "kingdisplay,kd035g6-54nt";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+            spi-3wire;
+            spi-cs-high;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&ldo6>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt
deleted file mode 100644
index cfefff688614..000000000000
--- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
-
-Required properties:
-- compatible: should be "kingdisplay,kd097d04"
-- reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
-- enable-gpios: panel enable gpio
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	&mipi_dsi {
-		panel@0 {
-			compatible = "kingdisplay,kd097d04";
-			reg = <0>;
-			power-supply = <...>;
-			backlight = <&backlight>;
-			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
new file mode 100644
index 000000000000..a372bdc5bde1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - leadtek,ltk050h3146w
+      - leadtek,ltk050h3146w-a2
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+     description: regulator that supplies the iovcc voltage
+  vci-supply:
+     description: regulator that supplies the vci voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk050h3146w";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_lcd>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt b/Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt
deleted file mode 100644
index fc1e1b325e49..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
-
-Required properties:
-- compatible: must be "lg,acx467akm-7"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt
deleted file mode 100644
index 5e649cb9aa1a..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG Corporation 7" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,ld070wx3-sl01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt b/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt
deleted file mode 100644
index 824441f4e95a..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-LG LG4573 TFT Liquid Crystal Display with SPI control bus
-
-Required properties:
-  - compatible: "lg,lg4573"
-  - reg: address of the panel on the SPI bus
-
-The panel must obey rules for SPI slave device specified in document [1].
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-	lcd_panel: display@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lg,lg4573";
-		spi-max-frequency = <10000000>;
-		reg = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
new file mode 100644
index 000000000000..b4314ce7b411
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,lg4573.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG LG4573 TFT Liquid Crystal Display with SPI control bus
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Heiko Schocher <hs@denx.de>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: lg,lg4573
+
+  reg: true
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lcd_panel: display@0 {
+            compatible = "lg,lg4573";
+            spi-max-frequency = <10000000>;
+            reg = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt b/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt
deleted file mode 100644
index a04fd2b2e73d..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG Corporation 5" HD TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lh500wx1-sd03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt
deleted file mode 100644
index 1a1e653e5407..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-LG.Philips LB035Q02 Panel
-=========================
-
-Required properties:
-- compatible: "lgphilips,lb035q02"
-- enable-gpios: panel enable gpio
-
-Optional properties:
-- label: a symbolic name for the panel
-
-Required nodes:
-- Video port for DPI input
-
-Example
--------
-
-lcd-panel: panel@0 {
-	compatible = "lgphilips,lb035q02";
-	reg = <0>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	label = "lcd";
-
-	enable-gpios = <&gpio7 7 0>;
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
new file mode 100644
index 000000000000..830e335ddb53
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lgphilips,lb035q02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG.Philips LB035Q02 Panel
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: lgphilips,lb035q02
+
+  label: true
+  enable-gpios: true
+  port: true
+
+required:
+  - compatible
+  - enable-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "lgphilips,lb035q02";
+            reg = <0>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            label = "lcd";
+
+            enable-gpios = <&gpio7 7 0>;
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
deleted file mode 100644
index a89f9c830a85..000000000000
--- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
-
-This device can be used as bridge between a host controller and LCD panels.
-Currently supported LCDs are:
-  - LCD-OLinuXino-4.3TS
-  - LCD-OLinuXino-5
-  - LCD-OLinuXino-7
-  - LCD-OLinuXino-10
-
-The panel itself contains:
-  - AT24C16C EEPROM holding panel identification and timing requirements
-  - AR1021 resistive touch screen controller (optional)
-  - FT5x6 capacitive touch screnn controller (optional)
-  - GT911/GT928 capacitive touch screen controller (optional)
-
-The above chips share same I2C bus. The EEPROM is factory preprogrammed with
-device information (id, serial, etc.) and timing requirements.
-
-Touchscreen bingings can be found in these files:
-  - input/touchscreen/goodix.txt
-  - input/touchscreen/edt-ft5x06.txt
-  - input/touchscreen/ar1021.txt
-
-Required properties:
-  - compatible: should be "olimex,lcd-olinuxino"
-  - reg: address of the configuration EEPROM, should be <0x50>
-  - power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-  - enable-gpios: GPIO pin to enable or disable the panel
-  - backlight: phandle of the backlight device attacked to the panel
-
-Example:
-&i2c2 {
-	panel@50 {
-		compatible = "olimex,lcd-olinuxino";
-		reg = <0x50>;
-		power-supply = <&reg_vcc5v0>;
-		enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
-		backlight = <&backlight>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
new file mode 100644
index 000000000000..2329d9610f83
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
+
+maintainers:
+  - Stefan Mavrodiev <stefan@olimex.com>
+
+description: |
+  This device can be used as bridge between a host controller and LCD panels.
+  Currently supported LCDs are:
+    - LCD-OLinuXino-4.3TS
+    - LCD-OLinuXino-5
+    - LCD-OLinuXino-7
+    - LCD-OLinuXino-10
+
+  The panel itself contains:
+    - AT24C16C EEPROM holding panel identification and timing requirements
+    - AR1021 resistive touch screen controller (optional)
+    - FT5x6 capacitive touch screnn controller (optional)
+    - GT911/GT928 capacitive touch screen controller (optional)
+
+  The above chips share same I2C bus. The EEPROM is factory preprogrammed with
+  device information (id, serial, etc.) and timing requirements.
+
+  Touchscreen bingings can be found in these files:
+    - input/touchscreen/goodix.yaml
+    - input/touchscreen/edt-ft5x06.txt
+    - input/touchscreen/ar1021.txt
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: olimex,lcd-olinuxino
+
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+  reg: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@50 {
+            compatible = "olimex,lcd-olinuxino";
+            reg = <0x50>;
+            power-supply = <&reg_vcc5v0>;
+            enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2587-53ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2587-53ts.txt
deleted file mode 100644
index 9d88e96003fc..000000000000
--- a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2587-53ts.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
-
-The panel is similar to OSD101T2045-53TS, but it needs additional
-MIPI_DSI_TURN_ON_PERIPHERAL message from the host.
-
-Required properties:
-- compatible: should be "osddisplays,osd101t2587-53ts"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index ed051ba12084..17b8367f12dd 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -63,9 +63,9 @@ properties:
 
   display-timings:
     description:
-      Some display panels supports several resolutions with different timing.
+      Some display panels support several resolutions with different timings.
       The display-timings bindings supports specifying several timings and
-      optional specify which is the native mode.
+      optionally specifying which is the native mode.
     allOf:
       - $ref: display-timings.yaml#
 
@@ -124,6 +124,13 @@ properties:
       while active. Active high reset signals can be supported by inverting the
       GPIO specifier polarity flag.
 
+  te-gpios:
+    maxItems: 1
+    description:
+      GPIO spec for the tearing effect synchronization signal.
+      The tearing effect signal is active high. Active low signals can be
+      supported by inverting the GPIO specifier polarity flag.
+
   # Power
   power-supply:
     description:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
index b2e8742fd6af..16778ce782fc 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
@@ -29,6 +29,20 @@ properties:
       # compatible must be listed in alphabetical order, ordered by compatible.
       # The description in the comment is mandatory for each compatible.
 
+        # AU Optronics Corporation 8.0" WUXGA TFT LCD panel
+      - auo,b080uan01
+        # Boe Corporation 8.0" WUXGA TFT LCD panel
+      - boe,tv080wum-nl0
+        # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
+      - kingdisplay,kd097d04
+        # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
+      - lg,acx467akm-7
+        # LG Corporation 7" WXGA TFT LCD panel
+      - lg,ld070wx3-sl01
+        # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
+      - osddisplays,osd101t2587-53ts
+        # Panasonic 10" WUXGA TFT LCD panel
+      - panasonic,vvx10f004b00
         # Panasonic 10" WUXGA TFT LCD panel
       - panasonic,vvx10f034n00
 
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 393ffc6acbba..fdd74d07f645 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -33,8 +33,6 @@ properties:
       - ampire,am-480272h3tmqw-t01h
         # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
       - ampire,am800480r3tmqwa1h
-        # AU Optronics Corporation 8.0" WUXGA TFT LCD panel
-      - auo,b080uan01
         # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
       - auo,b101aw03
         # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
@@ -55,10 +53,16 @@ properties:
       - auo,g101evn010
         # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
       - auo,g104sn02
+        # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel
+      - auo,g121ean01
         # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
       - auo,g133han01
+        # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
+      - auo,g156xtn01
         # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
       - auo,g185han01
+        # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
+      - auo,g190ean01
         # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
       - auo,p320hvn03
         # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
@@ -69,10 +73,10 @@ properties:
       - boe,hv070wsa-100
         # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
       - boe,nv101wxmn51
+        # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv133fhm-n61
         # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
       - boe,nv140fhmn49
-        # Boe Corporation 8.0" WUXGA TFT LCD panel
-      - boe,tv080wum-nl0
         # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
       - cdtech,s043wq26h-ct7
         # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
@@ -82,6 +86,8 @@ properties:
         # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
       - chunghwa,claa101wa01a
         # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wb01
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
       - chunghwa,claa101wb03
         # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
       - dataimage,scf0700c48ggu18
@@ -127,6 +133,8 @@ properties:
       - hannstar,hsd100pxn1
         # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
       - hit,tx23d38vm0caa
+        # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
+      - ivo,m133nwf4-r0
         # Innolux AT043TN24 4.3" WQVGA TFT LCD panel
       - innolux,at043tn24
         # Innolux AT070TN92 7.0" WQVGA TFT LCD panel
@@ -155,6 +163,8 @@ properties:
       - lemaker,bl035-rgb-002
         # LG 7" (800x480 pixels) TFT LCD panel
       - lg,lb070wv8
+        # LG Corporation 5" HD TFT LCD panel
+      - lg,lh500wx1-sd03
         # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
       - lg,lp079qx1-sp0v
         # LG 9.7" (2048x1536 pixels) TFT LCD panel
@@ -227,6 +237,8 @@ properties:
       - sharp,ls020b1dd01d
         # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
       - shelly,sca07010-bfn-lnn
+        # Starry KR070PE2T 7" WVGA TFT LCD panel
+      - starry,kr070pe2t
         # Starry 12.2" (1920x1200 pixels) TFT LCD panel
       - starry,kr122ea0sra
         # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
deleted file mode 100644
index 10424695aa02..000000000000
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
-
-Required properties:
-- compatible: 		"raydium,rm67191"
-- reg:			virtual channel for MIPI-DSI protocol
-			must be <0>
-- dsi-lanes:		number of DSI lanes to be used
-			must be <3> or <4>
-- port: 		input port node with endpoint definition as
-			defined in Documentation/devicetree/bindings/graph.txt;
-			the input port should be connected to a MIPI-DSI device
-			driver
-
-Optional properties:
-- reset-gpios:		a GPIO spec for the RST_B GPIO pin
-- v3p3-supply:		phandle to 3.3V regulator that powers the VDD_3V3 pin
-- v1p8-supply:		phandle to 1.8V regulator that powers the VDD_1V8 pin
-- width-mm:		see panel-common.txt
-- height-mm:		see panel-common.txt
-- video-mode:		0 - burst-mode
-			1 - non-burst with sync event
-			2 - non-burst with sync pulse
-
-Example:
-
-	panel@0 {
-		compatible = "raydium,rm67191";
-		reg = <0>;
-		pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>;
-		pinctrl-names = "default";
-		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		dsi-lanes = <4>;
-		width-mm = <68>;
-		height-mm = <121>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&mipi_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
new file mode 100644
index 000000000000..745dd247c409
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
+
+maintainers:
+  - Robert Chiras <robert.chiras@nxp.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: raydium,rm67191
+
+  reg: true
+  port: true
+  reset-gpios: true
+  width-mm: true
+  height-mm: true
+
+  dsi-lanes:
+    description: Number of DSI lanes to be used must be <3> or <4>
+    enum: [3, 4]
+
+  v3p3-supply:
+    description: phandle to 3.3V regulator that powers the VDD_3V3 pin
+
+  v1p8-supply:
+    description: phandle to 1.8V regulator that powers the VDD_1V8 pin
+
+  video-mode:
+    description: |
+      0 - burst-mode
+      1 - non-burst with sync event
+      2 - non-burst with sync pulse
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+  - dsi-lanes
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "raydium,rm67191";
+            reg = <0>;
+            reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+            dsi-lanes = <4>;
+            width-mm = <68>;
+            height-mm = <121>;
+            video-mode = <1>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
new file mode 100644
index 000000000000..96bdde9298e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMOLED MIPI-DSI panels
+
+maintainers:
+  - Hoegeun Kwon <hoegeun.kwon@samsung.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel
+      - samsung,s6e63j0x03
+        # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+      - samsung,s6e3ha2
+        # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
+      - samsung,s6e3hf2
+
+  reg: true
+  reset-gpios: true
+  enable-gpios: true
+  te-gpios: true
+
+  vdd3-supply:
+    description: I/O voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e3ha2";
+            reg = <0>;
+            vdd3-supply = <&ldo27_reg>;
+            vci-supply = <&ldo28_reg>;
+            reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+            te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
deleted file mode 100644
index 354d4d1df4ff..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
-
-Required properties:
-  - compatible: "samsung,ld9040"
-  - reg: address of the panel on SPI bus
-  - vdd3-supply: core voltage supply
-  - vci-supply: voltage supply for analog circuits
-  - reset-gpios: a GPIO spec for the reset pin
-  - display-timings: timings for the connected panel according to [1]
-
-The panel must obey rules for SPI slave device specified in document [2].
-
-Optional properties:
-  - power-on-delay: delay after turning regulators on [ms]
-  - reset-delay: delay after reset sequence [ms]
-  - panel-width-mm: physical panel width [mm]
-  - panel-height-mm: physical panel height [mm]
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [3]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	lcd@0 {
-		compatible = "samsung,ld9040";
-		reg = <0>;
-		vdd3-supply = <&ldo7_reg>;
-		vci-supply = <&ldo17_reg>;
-		reset-gpios = <&gpy4 5 0>;
-		spi-max-frequency = <1200000>;
-		spi-cpol;
-		spi-cpha;
-		power-on-delay = <10>;
-		reset-delay = <10>;
-		panel-width-mm = <90>;
-		panel-height-mm = <154>;
-
-		display-timings {
-			timing {
-				clock-frequency = <23492370>;
-				hactive = <480>;
-				vactive = <800>;
-				hback-porch = <16>;
-				hfront-porch = <16>;
-				vback-porch = <2>;
-				vfront-porch = <28>;
-				hsync-len = <2>;
-				vsync-len = <1>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <0>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			lcd_ep: endpoint {
-				remote-endpoint = <&fimd_dpi_ep>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
new file mode 100644
index 000000000000..060ee27a4749
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ld9040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,ld9040
+
+  display-timings: true
+  port: true
+  reg: true
+  reset-gpios: true
+
+  vdd3-supply:
+    description: core voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+  power-on-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: delay after turning regulators on [ms]
+
+  reset-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: delay after reset sequence [ms]
+
+  panel-width-mm:
+    description: physical panel width [mm]
+
+  panel-height-mm:
+    description: physical panel height [mm]
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+  - display-timings
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lcd@0 {
+            compatible = "samsung,ld9040";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0>;
+            vdd3-supply = <&ldo7_reg>;
+            vci-supply = <&ldo17_reg>;
+            reset-gpios = <&gpy4 5 0>;
+            spi-max-frequency = <1200000>;
+            spi-cpol;
+            spi-cpha;
+            power-on-delay = <10>;
+            reset-delay = <10>;
+            panel-width-mm = <90>;
+            panel-height-mm = <154>;
+
+            display-timings {
+                timing {
+                    clock-frequency = <23492370>;
+                    hactive = <480>;
+                    vactive = <800>;
+                    hback-porch = <16>;
+                    hfront-porch = <16>;
+                    vback-porch = <2>;
+                    vfront-porch = <28>;
+                    hsync-len = <2>;
+                    vsync-len = <1>;
+                    hsync-active = <0>;
+                    vsync-active = <0>;
+                    de-active = <0>;
+                    pixelclk-active = <0>;
+                };
+            };
+
+            port {
+                lcd_ep: endpoint {
+                    remote-endpoint = <&fimd_dpi_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt
deleted file mode 100644
index b94e366f451b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Samsung S6D16D0 4" 864x480 AMOLED panel
-
-Required properties:
-  - compatible: should be:
-    "samsung,s6d16d0",
-  - reg: the virtual channel number of a DSI peripheral
-  - vdd1-supply: I/O voltage supply
-  - reset-gpios: a GPIO spec for the reset pin (active low)
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in
-media/video-interfaces.txt. This node should describe panel's video bus.
-
-Example:
-&dsi {
-	...
-
-	panel@0 {
-		compatible = "samsung,s6d16d0";
-		reg = <0>;
-		vdd1-supply = <&foo>;
-		reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
new file mode 100644
index 000000000000..66d147496bc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d16d0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D16D0 4" 864x480 AMOLED panel
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6d16d0
+
+  port: true
+  reg: true
+  reset-gpios: true
+
+  vdd1-supply:
+    description: I/O voltage supply
+
+required:
+  - compatible
+  - reg
+  - vdd1-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6d16d0";
+            reg = <0>;
+            vdd1-supply = <&foo>;
+            reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
deleted file mode 100644
index 4acea25c244b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
-Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
-
-Required properties:
-  - compatible: should be one of:
-    "samsung,s6e3ha2",
-    "samsung,s6e3hf2".
-  - reg: the virtual channel number of a DSI peripheral
-  - vdd3-supply: I/O voltage supply
-  - vci-supply: voltage supply for analog circuits
-  - reset-gpios: a GPIO spec for the reset pin (active low)
-  - enable-gpios: a GPIO spec for the panel enable pin (active high)
-
-Optional properties:
-  - te-gpios: a GPIO spec for the tearing effect synchronization signal
-    gpio pin (active high)
-
-Example:
-&dsi {
-	...
-
-	panel@0 {
-		compatible = "samsung,s6e3ha2";
-		reg = <0>;
-		vdd3-supply = <&ldo27_reg>;
-		vci-supply = <&ldo28_reg>;
-		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
-		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
-		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
deleted file mode 100644
index 3f1a8392af7f..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)
-
-Required properties:
-  - compatible: "samsung,s6e63j0x03"
-  - reg: the virtual channel number of a DSI peripheral
-  - vdd3-supply: I/O voltage supply
-  - vci-supply: voltage supply for analog circuits
-  - reset-gpios: a GPIO spec for the reset pin (active low)
-  - te-gpios: a GPIO spec for the tearing effect synchronization signal
-    gpio pin (active high)
-
-Example:
-&dsi {
-	...
-
-	panel@0 {
-		compatible = "samsung,s6e63j0x03";
-		reg = <0>;
-		vdd3-supply = <&ldo16_reg>;
-		vci-supply = <&ldo20_reg>;
-		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
-		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
deleted file mode 100644
index 9fb9ebeef8e4..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Samsung s6e63m0 AMOLED LCD panel
-
-Required properties:
-  - compatible: "samsung,s6e63m0"
-  - reset-gpios: GPIO spec for reset pin
-  - vdd3-supply: VDD regulator
-  - vci-supply: VCI regulator
-
-The panel must obey rules for SPI slave device specified in document [1].
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-		s6e63m0: display@0 {
-			compatible = "samsung,s6e63m0";
-			reg = <0>;
-			reset-gpio = <&mp05 5 1>;
-			vdd3-supply = <&ldo12_reg>;
-			vci-supply = <&ldo11_reg>;
-			spi-max-frequency = <1200000>;
-
-			port {
-				lcd_ep: endpoint {
-					remote-endpoint = <&fimd_ep>;
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
new file mode 100644
index 000000000000..1dab80ae1d0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e63m0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung s6e63m0 AMOLED LCD panel
+
+maintainers:
+  - Jonathan Bakker <xc-racer2@live.ca>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e63m0
+
+  reg: true
+  reset-gpios: true
+  port: true
+
+  vdd3-supply:
+    description: VDD regulator
+
+  vci-supply:
+    description: VCI regulator
+
+required:
+  - compatible
+  - reset-gpios
+  - vdd3-supply
+  - vci-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "samsung,s6e63m0";
+            reg = <0>;
+            reset-gpios = <&mp05 5 1>;
+            vdd3-supply = <&ldo12_reg>;
+            vci-supply = <&ldo11_reg>;
+            spi-max-frequency = <1200000>;
+
+            port {
+                lcd_ep: endpoint {
+                    remote-endpoint = <&fimd_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
deleted file mode 100644
index aae57ef36cdd..000000000000
--- a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
-
-Required properties:
-- compatible: should be "sii,43wvf1g".
-- "dvdd-supply": 3v3 digital regulator.
-- "avdd-supply": 5v analog regulator.
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-Example:
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
new file mode 100644
index 000000000000..cfaa50cf5f5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/seiko,43wvf1g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
+
+maintainers:
+  - Marco Franchi <marco.franchi@nxp.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sii,43wvf1g
+
+  backlight: true
+  port: true
+
+  dvdd-supply:
+    description: 3v3 digital regulator
+
+  avdd-supply:
+    description: 5v analog regulator
+
+required:
+  - compatible
+  - dvdd-supply
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    panel {
+        compatible = "sii,43wvf1g";
+
+        backlight = <&backlight_display>;
+        dvdd-supply = <&reg_lcd_3v3>;
+        avdd-supply = <&reg_lcd_5v>;
+        port {
+            panel_in: endpoint {
+                remote-endpoint = <&display_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
deleted file mode 100644
index 0f57c3143506..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Sharp 15" LQ150X1LG11 XGA TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq150x1lg11"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-
-Optional properties:
-- backlight: phandle of the backlight device
-- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin.
-- sellvds-gpios: a single GPIO for the SELLVDS pin.
-
-If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS
-pins are assumed to be handled appropriately by the hardware.
-
-Example:
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 100000>;                      /* VBR */
-
-		brightness-levels = <0 20 40 60 80 100>;
-		default-brightness-level = <2>;
-
-		power-supply = <&vdd_12v_reg>;               /* VDD */
-		enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;  /* XSTABY */
-	};
-
-	panel {
-		compatible = "sharp,lq150x1lg11";
-
-		power-supply = <&vcc_3v3_reg>;               /* VCC */
-
-		backlight = <&backlight>;
-		rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;    /* RL/UD */
-		sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
new file mode 100644
index 000000000000..92f2d12f4f4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq150x1lg11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp 15" LQ150X1LG11 XGA TFT LCD panel
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,lq150x1lg11
+
+  power-supply: true
+  backlight: true
+
+  rlud-gpios:
+    maxItems: 1
+    description: |
+      GPIO for the RL/UD (rotate 180 degrees) pin.
+      If rlud-gpios and/or sellvds-gpios are not specified,
+      the RL/UD and/or SELLVDS pins are assumed to be handled
+      appropriately by the hardware.
+
+  sellvds-gpios:
+    maxItems: 1
+    description: |
+      GPIO for the SELLVDS pin.
+      If rlud-gpios and/or sellvds-gpios are not specified,
+      the RL/UD and/or SELLVDS pins are assumed to be handled
+      appropriately by the hardware.
+
+required:
+  - compatible
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    panel {
+        compatible = "sharp,lq150x1lg11";
+
+        power-supply = <&vcc_3v3_reg>;               /* VCC */
+
+        backlight = <&backlight>;
+        rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;    /* RL/UD */
+        sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt
deleted file mode 100644
index 0cc8981e9d49..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-SHARP LS037V7DW01 TFT-LCD panel
-===================================
-
-Required properties:
-- compatible: "sharp,ls037v7dw01"
-
-Optional properties:
-- label: a symbolic name for the panel
-- enable-gpios: a GPIO spec for the optional enable pin.
-  This pin is the INI pin as specified in the LS037V7DW01.pdf file.
-- reset-gpios: a GPIO spec for the optional reset pin.
-  This pin is the RESB pin as specified in the LS037V7DW01.pdf file.
-- mode-gpios: a GPIO
-  ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
-
-Required nodes:
-- Video port for DPI input
-
-This panel can have zero to five GPIOs to configure to change configuration
-between QVGA and VGA mode and the scan direction. As these pins can be also
-configured with external pulls, all the GPIOs are considered optional with holes
-in the array.
-
-Example
--------
-
-Example when connected to a omap2+ based device:
-
-lcd0: display {
-	compatible = "sharp,ls037v7dw01";
-	power-supply = <&lcd_3v3>;
-	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
-	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
-	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
-		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
-		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml
new file mode 100644
index 000000000000..8c47a9b0b507
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls037v7dw01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SHARP LS037V7DW01 TFT-LCD panel
+
+description: |
+  This panel can have zero to five GPIOs to configure to change configuration
+  between QVGA and VGA mode and the scan direction. As these pins can be also
+  configured with external pulls, all the GPIOs are considered optional with holes
+  in the array.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls037v7dw01
+
+  label: true
+  enable-gpios: true
+  reset-gpios: true
+  port: true
+  power-supply: true
+
+  mode-gpios:
+    minItems: 1
+    maxItems: 3
+    description: |
+      GPIO ordered MO, LR, and UD as specified in LS037V7DW01.pdf
+      This panel can have zero to three GPIOs to configure to
+      change configuration between QVGA and VGA mode and the
+      scan direction. As these pins can be also configured
+      with external pulls, all the GPIOs are considered
+      optional with holes in the array.
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    lcd0: display {
+        compatible = "sharp,ls037v7dw01";
+        power-supply = <&lcd_3v3>;
+        enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;    /* gpio152, lcd INI */
+        reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;     /* gpio155, lcd RESB */
+        mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH        /* gpio154, lcd MO */
+                      &gpio1 2 GPIO_ACTIVE_HIGH         /* gpio2, lcd LR */
+                      &gpio1 3 GPIO_ACTIVE_HIGH>;       /* gpio3, lcd UD */
+
+        port {
+            lcd_in: endpoint {
+                remote-endpoint = <&dpi_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
deleted file mode 100644
index 3770a111968b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Sharp Microelectronics 4.3" qHD TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,ls043t1le01-qhd"
-- reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-- reset-gpios: a GPIO spec for the reset pin
-
-Example:
-
-	mdss_dsi@fd922800 {
-		panel@0 {
-			compatible = "sharp,ls043t1le01-qhd";
-			reg = <0>;
-			avdd-supply = <&pm8941_l22>;
-			backlight = <&pm8941_wled>;
-			reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
new file mode 100644
index 000000000000..a90d0d8bf7c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls043t1le01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+maintainers:
+  - Werner Johansson <werner.johansson@sonymobile.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls043t1le01-qhd
+
+  reg: true
+  backlight: true
+  reset-gpios: true
+  port: true
+
+  avdd-supply:
+    description: handle of the regulator that provides the supply voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls043t1le01-qhd";
+            reg = <0>;
+            avdd-supply = <&pm8941_l22>;
+            backlight = <&pm8941_wled>;
+            reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
deleted file mode 100644
index e11208fb7da8..000000000000
--- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
+++ /dev/null
@@ -1 +0,0 @@
-See panel-common.yaml in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
deleted file mode 100644
index ccd17597f1f6..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Sitronix ST7701 based LCD panels
-
-ST7701 designed for small and medium sizes of TFT LCD display, is
-capable of supporting up to 480RGBX864 in resolution. It provides
-several system interfaces like MIPI/RGB/SPI.
-
-Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
-inbuilt ST7701 chip.
-
-Required properties:
-- compatible: must be "sitronix,st7701" and one of
-  * "techstar,ts8550b"
-- reset-gpios: a GPIO phandle for the reset pin
-
-Required properties for techstar,ts8550b:
-- reg: DSI virtual channel used by that screen
-- VCC-supply: analog regulator for MIPI circuit
-- IOVCC-supply: I/O system regulator
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-panel@0 {
-	compatible = "techstar,ts8550b", "sitronix,st7701";
-	reg = <0>;
-	VCC-supply = <&reg_dldo2>;
-	IOVCC-supply = <&reg_dldo2>;
-	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
-	backlight = <&backlight>;
-};
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
new file mode 100644
index 000000000000..6dff59fe4be1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7701 based LCD panels
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+  ST7701 designed for small and medium sizes of TFT LCD display, is
+  capable of supporting up to 480RGBX864 in resolution. It provides
+  several system interfaces like MIPI/RGB/SPI.
+
+  Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
+  inbuilt ST7701 chip.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - techstar,ts8550b
+      - const: sitronix,st7701
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  VCC-supply:
+    description: analog regulator for MIPI circuit
+
+  IOVCC-supply:
+    description: I/O system regulator
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - VCC-supply
+  - IOVCC-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "techstar,ts8550b", "sitronix,st7701";
+            reg = <0>;
+            VCC-supply = <&reg_dldo2>;
+            IOVCC-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
deleted file mode 100644
index c6995dde641b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Sitronix ST7789V RGB panel with SPI control bus
-
-Required properties:
-  - compatible: "sitronix,st7789v"
-  - reg: Chip select of the panel on the SPI bus
-  - reset-gpios: a GPIO phandle for the reset pin
-  - power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-  - backlight: phandle to the backlight used
-
-The generic bindings for the SPI slaves documented in [1] also applies
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[2]: Documentation/devicetree/bindings/graph.txt
-
-Example:
-
-panel@0 {
-	compatible = "sitronix,st7789v";
-	reg = <0>;
-	reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
-	backlight = <&pwm_bl>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	port {
-		panel_input: endpoint {
-			remote-endpoint = <&tcon0_out_panel>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
new file mode 100644
index 000000000000..fa46d151e7b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7789v.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7789V RGB panel with SPI control bus
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sitronix,st7789v
+
+  reg: true
+  reset-gpios: true
+  power-supply: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - power-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sitronix,st7789v";
+            reg = <0>;
+            reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
+            backlight = <&pwm_bl>;
+            power-supply = <&power>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&tcon0_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
index 185dcc8fd1f9..78d060097052 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -18,7 +18,7 @@ properties:
   reg: true
   reset-gpios: true
   vddi-supply:
-     description: regulator that supplies the vddi voltage
+    description: regulator that supplies the vddi voltage
   enforce-video-mode: true
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt
deleted file mode 100644
index e12333280749..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Sony ACX565AKM SDI Panel
-========================
-
-Required properties:
-- compatible: "sony,acx565akm"
-
-Optional properties:
-- label: a symbolic name for the panel
-- reset-gpios: panel reset gpio
-
-Required nodes:
-- Video port for SDI input
-
-Example
--------
-
-acx565akm@2 {
-	compatible = "sony,acx565akm";
-	spi-max-frequency = <6000000>;
-	reg = <2>;
-
-	label = "lcd";
-	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&sdi_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
new file mode 100644
index 000000000000..95d053c548ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx565akm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX565AKM SDI Panel
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,acx565akm
+
+  label: true
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@2 {
+            compatible = "sony,acx565akm";
+            spi-max-frequency = <6000000>;
+            reg = <2>;
+
+            label = "lcd";
+            reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&sdi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
deleted file mode 100644
index 70cd8d18d841..000000000000
--- a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "startek,startek-kd050c"
diff --git a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml
new file mode 100644
index 000000000000..fd668640afd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,startek-kd050c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
+
+maintainers:
+  - Nikita Kiryanov <nikita@compulab.co.il>
+
+allOf:
+  - $ref: panel-dpi.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: startek,startek-kd050c
+      - {} # panel-dpi, but not listed here to avoid false select
+
+  backlight: true
+  enable-gpios: true
+  height-mm: true
+  label: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  reset-gpios: true
+  width-mm: true
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
new file mode 100644
index 000000000000..4aa605613445
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tpo,td.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toppoly TD Panels
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Marek Belisko <marek@goldelico.com>
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # Toppoly TD028TTEC1 Panel
+      - tpo,td028ttec1
+        # Toppoly TD043MTEA1 Panel
+      - tpo,td043mtea1
+
+  reg: true
+  label: true
+  reset-gpios: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "tpo,td043mtea1";
+            reg = <0>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            label = "lcd";
+
+            reset-gpios = <&gpio7 7 0>;
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
deleted file mode 100644
index 898e06ecf4ef..000000000000
--- a/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Toppoly TD028TTEC1 Panel
-========================
-
-Required properties:
-- compatible: "tpo,td028ttec1"
-
-Optional properties:
-- label: a symbolic name for the panel
-- backlight: phandle of the backlight device
-
-Required nodes:
-- Video port for DPI input
-
-Example
--------
-
-lcd-panel: td028ttec1@0 {
-	compatible = "tpo,td028ttec1";
-	reg = <0>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	label = "lcd";
-	backlight = <&backlight>;
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt b/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt
deleted file mode 100644
index ec6d62975162..000000000000
--- a/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-TPO TD043MTEA1 Panel
-====================
-
-Required properties:
-- compatible: "tpo,td043mtea1"
-- reset-gpios: panel reset gpio
-
-Optional properties:
-- label: a symbolic name for the panel
-
-Required nodes:
-- Video port for DPI input
-
-Example
--------
-
-lcd-panel: panel@0 {
-	compatible = "tpo,td043mtea1";
-	reg = <0>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	label = "lcd";
-
-	reset-gpios = <&gpio7 7 0>;
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
new file mode 100644
index 000000000000..b36f39f6b233
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox model RM69299 Panels Device Tree Bindings.
+
+maintainers:
+ - Harigovindan P <harigovi@codeaurora.org>
+
+description: |
+  This binding is for display panels using a Visionox RM692999 panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,rm69299-1080p-display
+
+  vdda-supply:
+    description: |
+      Phandle of the regulator that provides the vdda supply voltage.
+
+  vdd3p3-supply:
+    description: |
+      Phandle of the regulator that provides the vdd3p3 supply voltage.
+
+  port: true
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - vdda-supply
+  - vdd3p3-supply
+  - reset-gpios
+  - port
+
+examples:
+  - |
+    panel {
+        compatible = "visionox,rm69299-1080p-display";
+
+        vdda-supply = <&src_pp1800_l8c>;
+        vdd3p3-supply = <&src_pp2800_l18a>;
+
+        reset-gpios = <&pm6150l_gpio 3 0>;
+        port {
+            panel0_in: endpoint {
+                remote-endpoint = <&dsi0_out>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index 6913923df569..d5c46a3cc2b0 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -19,9 +19,9 @@ properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vci-supply:
-     description: regulator that supplies the vci voltage
+    description: regulator that supplies the vci voltage
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
index a57037b9e9ba..005406c89507 100644
--- a/Documentation/devicetree/bindings/display/renesas,cmm.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
@@ -21,15 +21,15 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - renesas,r8a7795-cmm
-          - renesas,r8a7796-cmm
-          - renesas,r8a77965-cmm
-          - renesas,r8a77990-cmm
-          - renesas,r8a77995-cmm
-        - const: renesas,rcar-gen3-cmm
+          - enum:
+              - renesas,r8a7795-cmm
+              - renesas,r8a7796-cmm
+              - renesas,r8a77965-cmm
+              - renesas,r8a77990-cmm
+              - renesas,r8a77995-cmm
+          - const: renesas,rcar-gen3-cmm
       - items:
-        - const: renesas,rcar-gen2-cmm
+          - const: renesas,rcar-gen2-cmm
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt
deleted file mode 100644
index d1ad31bca8d9..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Rockchip specific extensions for rk3066 HDMI
-============================================
-
-Required properties:
-- compatible:
-	"rockchip,rk3066-hdmi";
-- reg:
-	Physical base address and length of the controller's registers.
-- clocks, clock-names:
-	Phandle to HDMI controller clock, name should be "hclk".
-- interrupts:
-	HDMI interrupt number.
-- power-domains:
-	Phandle to the RK3066_PD_VIO power domain.
-- rockchip,grf:
-	This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
-- ports:
-	Contains one port node with two endpoints, numbered 0 and 1,
-	connected respectively to vop0 and vop1.
-	Contains one port node with one endpoint
-	connected to a hdmi-connector node.
-- pinctrl-0, pinctrl-name:
-	Switch the iomux for the HPD/I2C pins to HDMI function.
-
-Example:
-	hdmi: hdmi@10116000 {
-		compatible = "rockchip,rk3066-hdmi";
-		reg = <0x10116000 0x2000>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_HDMI>;
-		clock-names = "hclk";
-		power-domains = <&power RK3066_PD_VIO>;
-		rockchip,grf = <&grf>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			hdmi_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				hdmi_in_vop0: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vop0_out_hdmi>;
-				};
-				hdmi_in_vop1: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vop1_out_hdmi>;
-				};
-			};
-			hdmi_out: port@1 {
-				reg = <1>;
-				hdmi_out_con: endpoint {
-					remote-endpoint = <&hdmi_con_in>;
-				};
-			};
-		};
-	};
-
-&pinctrl {
-		hdmi {
-			hdmi_hpd: hdmi-hpd {
-				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
-			};
-			hdmii2c_xfer: hdmii2c-xfer {
-				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
-						<0 RK_PA2 1 &pcfg_pull_none>;
-			};
-		};
-};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
new file mode 100644
index 000000000000..4110d003ce1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3066 HDMI controller
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3066-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hclk
+
+  pinctrl-0:
+    maxItems: 2
+
+  pinctrl-names:
+    const: default
+    description:
+      Switch the iomux for the HPD/I2C pins to HDMI function.
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
+
+  ports:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description:
+          Port node with two endpoints, numbered 0 and 1,
+          connected respectively to vop0 and vop1.
+
+      port@1:
+        type: object
+        description:
+          Port node with one endpoint connected to a hdmi-connector node.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-0
+  - pinctrl-names
+  - power-domains
+  - rockchip,grf
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3066a-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/power/rk3066-power.h>
+    hdmi: hdmi@10116000 {
+      compatible = "rockchip,rk3066-hdmi";
+      reg = <0x10116000 0x2000>;
+      interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_HDMI>;
+      clock-names = "hclk";
+      pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+      pinctrl-names = "default";
+      power-domains = <&power RK3066_PD_VIO>;
+      rockchip,grf = <&grf>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+          hdmi_in_vop0: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vop0_out_hdmi>;
+          };
+          hdmi_in_vop1: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vop1_out_hdmi>;
+          };
+        };
+        hdmi_out: port@1 {
+          reg = <1>;
+          hdmi_out_con: endpoint {
+            remote-endpoint = <&hdmi_con_in>;
+          };
+        };
+      };
+    };
+
+    pinctrl {
+      hdmi {
+        hdmi_hpd: hdmi-hpd {
+          rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+        };
+        hdmii2c_xfer: hdmii2c-xfer {
+          rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+                          <0 RK_PA2 1 &pcfg_pull_none>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
deleted file mode 100644
index 8b3a5f514205..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-device-tree bindings for rockchip soc display controller (vop)
-
-VOP (Visual Output Processor) is the Display Controller for the Rockchip
-series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of the following
-		"rockchip,rk3036-vop";
-		"rockchip,rk3126-vop";
-		"rockchip,px30-vop-lit";
-		"rockchip,px30-vop-big";
-		"rockchip,rk3066-vop";
-		"rockchip,rk3188-vop";
-		"rockchip,rk3288-vop";
-		"rockchip,rk3368-vop";
-		"rockchip,rk3366-vop";
-		"rockchip,rk3399-vop-big";
-		"rockchip,rk3399-vop-lit";
-		"rockchip,rk3228-vop";
-		"rockchip,rk3328-vop";
-
-- reg: Must contain one entry corresponding to the base address and length
-	of the register space. Can optionally contain a second entry
-	corresponding to the CRTC gamma LUT address.
-
-- interrupts: should contain a list of all VOP IP block interrupts in the
-		 order: VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- clocks: must include clock specifiers corresponding to entries in the
-		clock-names property.
-
-- clock-names: Must contain
-		aclk_vop: for ddr buffer transfer.
-		hclk_vop: for ahb bus to R/W the phy regs.
-		dclk_vop: pixel clock.
-
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - axi
-  - ahb
-  - dclk
-
-- iommus: required a iommu node
-
-- port: A port node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-SoC specific DT entry:
-	vopb: vopb@ff930000 {
-		compatible = "rockchip,rk3288-vop";
-		reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
-		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
-		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
-		reset-names = "axi", "ahb", "dclk";
-		iommus = <&vopb_mmu>;
-		vopb_out: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			vopb_out_edp: endpoint@0 {
-				reg = <0>;
-				remote-endpoint=<&edp_in_vopb>;
-			};
-			vopb_out_hdmi: endpoint@1 {
-				reg = <1>;
-				remote-endpoint=<&hdmi_in_vopb>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
new file mode 100644
index 000000000000..1695e3e4bcec
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP)
+
+description:
+  VOP (Video Output Processor) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-vop-big
+      - rockchip,px30-vop-lit
+      - rockchip,rk3036-vop
+      - rockchip,rk3066-vop
+      - rockchip,rk3126-vop
+      - rockchip,rk3188-vop
+      - rockchip,rk3228-vop
+      - rockchip,rk3288-vop
+      - rockchip,rk3328-vop
+      - rockchip,rk3366-vop
+      - rockchip,rk3368-vop
+      - rockchip,rk3399-vop-big
+      - rockchip,rk3399-vop-lit
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Pixel clock.
+      - description: Clock for the ahb bus to R/W the phy regs.
+
+  clock-names:
+    items:
+      - const: aclk_vop
+      - const: dclk_vop
+      - const: hclk_vop
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: dclk
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+  assigned-clocks:
+    maxItems: 2
+
+  assigned-clock-rates:
+    maxItems: 2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3288-power.h>
+    vopb: vopb@ff930000 {
+      compatible = "rockchip,rk3288-vop";
+      reg = <0x0 0xff930000 0x0 0x19c>,
+            <0x0 0xff931000 0x0 0x1000>;
+      interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_VOP0>,
+               <&cru DCLK_VOP0>,
+               <&cru HCLK_VOP0>;
+      clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+      power-domains = <&power RK3288_PD_VIO>;
+      resets = <&cru SRST_LCDC1_AXI>,
+               <&cru SRST_LCDC1_AHB>,
+               <&cru SRST_LCDC1_DCLK>;
+      reset-names = "axi", "ahb", "dclk";
+      iommus = <&vopb_mmu>;
+      vopb_out: port {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vopb_out_edp: endpoint@0 {
+          reg = <0>;
+          remote-endpoint=<&edp_in_vopb>;
+        };
+        vopb_out_hdmi: endpoint@1 {
+          reg = <1>;
+          remote-endpoint=<&hdmi_in_vopb>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
index e77b08ebcd06..ee1754739b4b 100644
--- a/Documentation/devicetree/bindings/dma/fsl-edma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt
@@ -10,7 +10,8 @@ Required properties:
 - compatible :
 	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
 	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
-	- "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC
+	- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
+	  LS1028A SoC.
 - reg : Specifies base physical address(s) and size of the eDMA registers.
 	The 1st region is eDMA control register's address and size.
 	The 2nd and the 3rd regions are programmable channel multiplexing
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
new file mode 100644
index 000000000000..92794c500589
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs DMA Controller DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4740-dma
+      - ingenic,jz4725b-dma
+      - ingenic,jz4770-dma
+      - ingenic,jz4780-dma
+      - ingenic,x1000-dma
+      - ingenic,x1830-dma
+
+  reg:
+    items:
+      - description: Channel-specific registers
+      - description: System control registers
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 2
+    description: >
+      DMA clients must use the format described in dma.txt, giving a phandle
+      to the DMA controller plus the following 2 integer cells:
+
+      - Request type: The DMA request type for transfers to/from the
+        device on the allocated channel, as defined in the SoC documentation.
+
+      - Channel: If set to 0xffffffff, any available channel will be allocated
+        for the client. Otherwise, the exact channel specified will be used.
+        The channel should be reserved on the DMA controller using the
+        ingenic,reserved-channels property.
+
+  ingenic,reserved-channels:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description: >
+      Bitmask of channels to reserve for devices that need a specific
+      channel. These channels will only be assigned when explicitely
+      requested by a client. The primary use for this is channels 0 and
+      1, which can be configured to have special behaviour for NAND/BCH
+      when using programmable firmware.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4780-cgu.h>
+    dma: dma-controller@13420000 {
+      compatible = "ingenic,jz4780-dma";
+      reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <10>;
+
+      clocks = <&cgu JZ4780_CLK_PDMA>;
+
+      #dma-cells = <2>;
+
+      ingenic,reserved-channels = <0x3>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
deleted file mode 100644
index 3459e77be294..000000000000
--- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Ingenic XBurst DMA Controller
-
-Required properties:
-
-- compatible: Should be one of:
-  * ingenic,jz4740-dma
-  * ingenic,jz4725b-dma
-  * ingenic,jz4770-dma
-  * ingenic,jz4780-dma
-  * ingenic,x1000-dma
-  * ingenic,x1830-dma
-- reg: Should contain the DMA channel registers location and length, followed
-  by the DMA controller registers location and length.
-- interrupts: Should contain the interrupt specifier of the DMA controller.
-- clocks: Should contain a clock specifier for the JZ4780/X1000/X1830 PDMA
-  clock.
-- #dma-cells: Must be <2>. Number of integer cells in the dmas property of
-  DMA clients (see below).
-
-Optional properties:
-
-- ingenic,reserved-channels: Bitmask of channels to reserve for devices that
-  need a specific channel. These channels will only be assigned when explicitly
-  requested by a client. The primary use for this is channels 0 and 1, which
-  can be configured to have special behaviour for NAND/BCH when using
-  programmable firmware.
-
-Example:
-
-dma: dma-controller@13420000 {
-	compatible = "ingenic,jz4780-dma";
-	reg = <0x13420000 0x400
-	       0x13421000 0x40>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <10>;
-
-	clocks = <&cgu JZ4780_CLK_PDMA>;
-
-	#dma-cells = <2>;
-
-	ingenic,reserved-channels = <0x3>;
-};
-
-DMA clients must use the format described in dma.txt, giving a phandle to the
-DMA controller plus the following 2 integer cells:
-
-1. Request type: The DMA request type for transfers to/from the device on
-   the allocated channel, as defined in the SoC documentation.
-
-2. Channel: If set to 0xffffffff, any available channel will be allocated for
-   the client. Otherwise, the exact channel specified will be used. The channel
-   should be reserved on the DMA controller using the ingenic,reserved-channels
-   property.
-
-Example:
-
-uart0: serial@10030000 {
-	...
-	dmas = <&dma 0x14 0xffffffff
-		&dma 0x15 0xffffffff>;
-	dma-names = "tx", "rx";
-	...
-};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
deleted file mode 100644
index b7f81c63be8b..000000000000
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-* Renesas R-Car (RZ/G) DMA Controller Device Tree bindings
-
-Renesas R-Car (Gen 2/3) and RZ/G SoCs have multiple multi-channel DMA
-controller instances named DMAC capable of serving multiple clients. Channels
-can be dedicated to specific clients or shared between a large number of
-clients.
-
-Each DMA client is connected to one dedicated port of the DMAC, identified by
-an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
-256 clients in total. When the number of hardware channels is lower than the
-number of clients to be served, channels must be shared between multiple DMA
-clients. The association of DMA clients to DMAC channels is fully dynamic and
-not described in these device tree bindings.
-
-Required Properties:
-
-- compatible: "renesas,dmac-<soctype>", "renesas,rcar-dmac" as fallback.
-	      Examples with soctypes are:
-		- "renesas,dmac-r8a7743" (RZ/G1M)
-		- "renesas,dmac-r8a7744" (RZ/G1N)
-		- "renesas,dmac-r8a7745" (RZ/G1E)
-		- "renesas,dmac-r8a77470" (RZ/G1C)
-		- "renesas,dmac-r8a774a1" (RZ/G2M)
-		- "renesas,dmac-r8a774b1" (RZ/G2N)
-		- "renesas,dmac-r8a774c0" (RZ/G2E)
-		- "renesas,dmac-r8a7790" (R-Car H2)
-		- "renesas,dmac-r8a7791" (R-Car M2-W)
-		- "renesas,dmac-r8a7792" (R-Car V2H)
-		- "renesas,dmac-r8a7793" (R-Car M2-N)
-		- "renesas,dmac-r8a7794" (R-Car E2)
-		- "renesas,dmac-r8a7795" (R-Car H3)
-		- "renesas,dmac-r8a7796" (R-Car M3-W)
-		- "renesas,dmac-r8a77961" (R-Car M3-W+)
-		- "renesas,dmac-r8a77965" (R-Car M3-N)
-		- "renesas,dmac-r8a77970" (R-Car V3M)
-		- "renesas,dmac-r8a77980" (R-Car V3H)
-		- "renesas,dmac-r8a77990" (R-Car E3)
-		- "renesas,dmac-r8a77995" (R-Car D3)
-
-- reg: base address and length of the registers block for the DMAC
-
-- interrupts: interrupt specifiers for the DMAC, one for each entry in
-  interrupt-names.
-- interrupt-names: one entry for the error interrupt, named "error", plus one
-  entry per channel, named "ch%u", where %u is the channel number ranging from
-  zero to the number of channels minus one.
-
-- clock-names: "fck" for the functional clock
-- clocks: a list of phandle + clock-specifier pairs, one for each entry
-  in clock-names.
-- clock-names: must contain "fck" for the functional clock.
-
-- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port
-  connected to the DMA client
-- dma-channels: number of DMA channels
-
-Example: R8A7790 (R-Car H2) SYS-DMACs
-
-	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
-		reg = <0 0xe6700000 0 0x20000>;
-		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
-			      0 200 IRQ_TYPE_LEVEL_HIGH
-			      0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH
-			      0 205 IRQ_TYPE_LEVEL_HIGH
-			      0 206 IRQ_TYPE_LEVEL_HIGH
-			      0 207 IRQ_TYPE_LEVEL_HIGH
-			      0 208 IRQ_TYPE_LEVEL_HIGH
-			      0 209 IRQ_TYPE_LEVEL_HIGH
-			      0 210 IRQ_TYPE_LEVEL_HIGH
-			      0 211 IRQ_TYPE_LEVEL_HIGH
-			      0 212 IRQ_TYPE_LEVEL_HIGH
-			      0 213 IRQ_TYPE_LEVEL_HIGH
-			      0 214 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error",
-				"ch0", "ch1", "ch2", "ch3",
-				"ch4", "ch5", "ch6", "ch7",
-				"ch8", "ch9", "ch10", "ch11",
-				"ch12", "ch13", "ch14";
-		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
-		clock-names = "fck";
-		#dma-cells = <1>;
-		dma-channels = <15>;
-	};
-
-	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
-		reg = <0 0xe6720000 0 0x20000>;
-		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-			      0 216 IRQ_TYPE_LEVEL_HIGH
-			      0 217 IRQ_TYPE_LEVEL_HIGH
-			      0 218 IRQ_TYPE_LEVEL_HIGH
-			      0 219 IRQ_TYPE_LEVEL_HIGH
-			      0 308 IRQ_TYPE_LEVEL_HIGH
-			      0 309 IRQ_TYPE_LEVEL_HIGH
-			      0 310 IRQ_TYPE_LEVEL_HIGH
-			      0 311 IRQ_TYPE_LEVEL_HIGH
-			      0 312 IRQ_TYPE_LEVEL_HIGH
-			      0 313 IRQ_TYPE_LEVEL_HIGH
-			      0 314 IRQ_TYPE_LEVEL_HIGH
-			      0 315 IRQ_TYPE_LEVEL_HIGH
-			      0 316 IRQ_TYPE_LEVEL_HIGH
-			      0 317 IRQ_TYPE_LEVEL_HIGH
-			      0 318 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error",
-				"ch0", "ch1", "ch2", "ch3",
-				"ch4", "ch5", "ch6", "ch7",
-				"ch8", "ch9", "ch10", "ch11",
-				"ch12", "ch13", "ch14";
-		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
-		clock-names = "fck";
-		#dma-cells = <1>;
-		dma-channels = <15>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
new file mode 100644
index 000000000000..b842dfd96a89
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rcar-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car and RZ/G DMA Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,dmac-r8a7743  # RZ/G1M
+          - renesas,dmac-r8a7744  # RZ/G1N
+          - renesas,dmac-r8a7745  # RZ/G1E
+          - renesas,dmac-r8a77470 # RZ/G1C
+          - renesas,dmac-r8a774a1 # RZ/G2M
+          - renesas,dmac-r8a774b1 # RZ/G2N
+          - renesas,dmac-r8a774c0 # RZ/G2E
+          - renesas,dmac-r8a7790  # R-Car H2
+          - renesas,dmac-r8a7791  # R-Car M2-W
+          - renesas,dmac-r8a7792  # R-Car V2H
+          - renesas,dmac-r8a7793  # R-Car M2-N
+          - renesas,dmac-r8a7794  # R-Car E2
+          - renesas,dmac-r8a7795  # R-Car H3
+          - renesas,dmac-r8a7796  # R-Car M3-W
+          - renesas,dmac-r8a77961 # R-Car M3-W+
+          - renesas,dmac-r8a77965 # R-Car M3-N
+          - renesas,dmac-r8a77970 # R-Car V3M
+          - renesas,dmac-r8a77980 # R-Car V3H
+          - renesas,dmac-r8a77990 # R-Car E3
+          - renesas,dmac-r8a77995 # R-Car D3
+      - const: renesas,rcar-dmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 9
+    maxItems: 17
+
+  interrupt-names:
+    minItems: 9
+    maxItems: 17
+    items:
+      - const: error
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+    items:
+      - const: fck
+
+  '#dma-cells':
+    const: 1
+    description:
+      The cell specifies the MID/RID of the DMAC port connected to
+      the DMA client.
+
+  dma-channels:
+    minimum: 8
+    maximum: 16
+
+  dma-channel-mask: true
+
+  iommus:
+    minItems: 8
+    maxItems: 16
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    dmac0: dma-controller@e6700000 {
+        compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
+        reg = <0xe6700000 0x20000>;
+        interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "error",
+                          "ch0", "ch1", "ch2", "ch3",
+                          "ch4", "ch5", "ch6", "ch7",
+                          "ch8", "ch9", "ch10", "ch11",
+                          "ch12", "ch13", "ch14";
+        clocks = <&cpg CPG_MOD 219>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 219>;
+        #dma-cells = <1>;
+        dma-channels = <15>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
deleted file mode 100644
index e8f6c42e80f2..000000000000
--- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Renesas USB DMA Controller Device Tree bindings
-
-Required Properties:
--compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback.
-	Examples with soctypes are:
-	  - "renesas,r8a7743-usb-dmac" (RZ/G1M)
-	  - "renesas,r8a7744-usb-dmac" (RZ/G1N)
-	  - "renesas,r8a7745-usb-dmac" (RZ/G1E)
-	  - "renesas,r8a77470-usb-dmac" (RZ/G1C)
-	  - "renesas,r8a774a1-usb-dmac" (RZ/G2M)
-	  - "renesas,r8a774b1-usb-dmac" (RZ/G2N)
-	  - "renesas,r8a774c0-usb-dmac" (RZ/G2E)
-	  - "renesas,r8a7790-usb-dmac" (R-Car H2)
-	  - "renesas,r8a7791-usb-dmac" (R-Car M2-W)
-	  - "renesas,r8a7793-usb-dmac" (R-Car M2-N)
-	  - "renesas,r8a7794-usb-dmac" (R-Car E2)
-	  - "renesas,r8a7795-usb-dmac" (R-Car H3)
-	  - "renesas,r8a7796-usb-dmac" (R-Car M3-W)
-	  - "renesas,r8a77961-usb-dmac" (R-Car M3-W+)
-	  - "renesas,r8a77965-usb-dmac" (R-Car M3-N)
-	  - "renesas,r8a77990-usb-dmac" (R-Car E3)
-	  - "renesas,r8a77995-usb-dmac" (R-Car D3)
-- reg: base address and length of the registers block for the DMAC
-- interrupts: interrupt specifiers for the DMAC, one for each entry in
-  interrupt-names.
-- interrupt-names: one entry per channel, named "ch%u", where %u is the
-  channel number ranging from zero to the number of channels minus one.
-- clocks: a list of phandle + clock-specifier pairs.
-- #dma-cells: must be <1>, the cell specifies the channel number of the DMAC
-  port connected to the DMA client.
-- dma-channels: number of DMA channels
-
-Example: R8A7790 (R-Car H2) USB-DMACs
-
-	usb_dmac0: dma-controller@e65a0000 {
-		compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
-		reg = <0 0xe65a0000 0 0x100>;
-		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
-			      0 109 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "ch0", "ch1";
-		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
-		#dma-cells = <1>;
-		dma-channels = <2>;
-	};
-
-	usb_dmac1: dma-controller@e65b0000 {
-		compatible = "renesas,usb-dmac";
-		reg = <0 0xe65b0000 0 0x100>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
-			      0 110 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "ch0", "ch1";
-		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
-		#dma-cells = <1>;
-		dma-channels = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
new file mode 100644
index 000000000000..9ca6d8ddf232
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,usb-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USB DMA Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7743-usb-dmac  # RZ/G1M
+          - renesas,r8a7744-usb-dmac  # RZ/G1N
+          - renesas,r8a7745-usb-dmac  # RZ/G1E
+          - renesas,r8a77470-usb-dmac # RZ/G1C
+          - renesas,r8a774a1-usb-dmac # RZ/G2M
+          - renesas,r8a774b1-usb-dmac # RZ/G2N
+          - renesas,r8a774c0-usb-dmac # RZ/G2E
+          - renesas,r8a7790-usb-dmac  # R-Car H2
+          - renesas,r8a7791-usb-dmac  # R-Car M2-W
+          - renesas,r8a7793-usb-dmac  # R-Car M2-N
+          - renesas,r8a7794-usb-dmac  # R-Car E2
+          - renesas,r8a7795-usb-dmac  # R-Car H3
+          - renesas,r8a7796-usb-dmac  # R-Car M3-W
+          - renesas,r8a77961-usb-dmac # R-Car M3-W+
+          - renesas,r8a77965-usb-dmac # R-Car M3-N
+          - renesas,r8a77990-usb-dmac # R-Car E3
+          - renesas,r8a77995-usb-dmac # R-Car D3
+      - const: renesas,usb-dmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - pattern: ch0
+      - pattern: ch1
+
+  clocks:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+    description:
+      The cell specifies the channel number of the DMAC port connected to
+      the DMA client.
+
+  dma-channels:
+    const: 2
+
+  iommus:
+    minItems: 2
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    usb_dmac0: dma-controller@e65a0000 {
+        compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
+        reg = <0xe65a0000 0x100>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "ch0", "ch1";
+        clocks = <&cpg CPG_MOD 330>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 330>;
+        #dma-cells = <1>;
+        dma-channels = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
index 86cfb599256e..371f18773198 100644
--- a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
@@ -22,9 +22,7 @@ properties:
     const: socionext,uniphier-xdmac
 
   reg:
-    items:
-      - description: XDMAC base register region (offset and length)
-      - description: XDMAC extension register region (offset and length)
+    maxItems: 1
 
   interrupts:
     maxItems: 1
@@ -49,12 +47,13 @@ required:
   - reg
   - interrupts
   - "#dma-cells"
+  - dma-channels
 
 examples:
   - |
     xdmac: dma-controller@5fc10000 {
         compatible = "socionext,uniphier-xdmac";
-        reg = <0x5fc10000 0x1000>, <0x5fc20000 0x800>;
+        reg = <0x5fc10000 0x5300>;
         interrupts = <0 188 4>;
         #dma-cells = <2>;
         dma-channels = <16>;
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
index 0c0ac11ad55f..71987878e4ae 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -36,6 +36,11 @@ description: |
          0x1: 1/2 full FIFO
          0x2: 3/4 full FIFO
          0x3: full FIFO
+       -bit 2: DMA direct mode
+         0x0: FIFO mode with threshold selectable with bit 0-1
+         0x1: Direct mode: each DMA request immediately initiates a transfer
+              from/to the memory, FIFO is bypassed.
+
 
 maintainers:
   - Amelie Delaunay <amelie.delaunay@st.com>
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index 39ea05e6e5ff..85056982a242 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -69,10 +69,10 @@ properties:
     maxItems: 3
 
   reg-names:
-   items:
-     - const: gcfg
-     - const: rchanrt
-     - const: tchanrt
+    items:
+      - const: gcfg
+      - const: rchanrt
+      - const: tchanrt
 
   msi-parent: true
 
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index a5dc070d0ca7..3bbe9521c0bc 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -17,6 +17,8 @@ properties:
   compatible:
     enum:
       - fsl,imx8qxp-dsp
+      - fsl,imx8qm-dsp
+      - fsl,imx8mp-dsp
 
   reg:
     description: Should contain register location and length
diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
index 1fa66065acc6..6eff1afd8daf 100644
--- a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
+++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
@@ -23,7 +23,7 @@ Required properties:
 The svc node has the following mandatory properties, must be located under
 the firmware node.
 
-- compatible: "intel,stratix10-svc"
+- compatible: "intel,stratix10-svc" or "intel,agilex-svc"
 - method: smc or hvc
         smc - Secure Monitor Call
         hvc - Hypervisor Call
diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
index 6e03f79287fb..0f874137ca46 100644
--- a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
+++ b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
@@ -4,7 +4,8 @@ Required properties:
 The fpga_mgr node has the following mandatory property, must be located under
 firmware/svc node.
 
-- compatible : should contain "intel,stratix10-soc-fpga-mgr"
+- compatible : should contain "intel,stratix10-soc-fpga-mgr" or
+	       "intel,agilex-soc-fpga-mgr"
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index 5f1ed20e43ee..4f2cbd8307a7 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -27,7 +27,7 @@ properties:
   gpio-controller: true
 
   '#gpio-cells':
-      const: 2
+    const: 2
 
   ngpios:
     minimum: 0
diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
new file mode 100644
index 000000000000..04a3c51e1dc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/snps,dw-apb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB GPIO controller
+
+description: |
+  Synopsys DesignWare GPIO controllers have a configurable number of ports,
+  each of which are intended to be represented as child nodes with the generic
+  GPIO-controller properties as desribed in this bindings file.
+
+maintainers:
+  - Hoan Tran <hoan@os.amperecomputing.com>
+  - Serge Semin <fancer.lancer@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: snps,dw-apb-gpio
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: APB interface clock source
+      - description: DW GPIO debounce reference clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: bus
+      - const: db
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^gpio-(port|controller)@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: snps,dw-apb-gpio-port
+
+      reg:
+        maxItems: 1
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      snps,nr-gpios:
+        description: The number of GPIO pins exported by the port.
+        default: 32
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - minimum: 1
+            maximum: 32
+
+      interrupts:
+        description: |
+          The interrupts to the parent controller raised when GPIOs generate
+          the interrupts. If the controller provides one combined interrupt
+          for all GPIOs, specify a single interrupt. If the controller provides
+          one interrupt for each GPIO, provide a list of interrupts that
+          correspond to each of the GPIO pins.
+        minItems: 1
+        maxItems: 32
+
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 2
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - '#gpio-cells'
+
+    dependencies:
+      interrupt-controller: [ interrupts ]
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    gpio: gpio@20000 {
+      compatible = "snps,dw-apb-gpio";
+      reg = <0x20000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      porta: gpio-port@0 {
+        compatible = "snps,dw-apb-gpio-port";
+        reg = <0>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        snps,nr-gpios = <8>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&vic1>;
+        interrupts = <0>;
+      };
+
+      portb: gpio-port@1 {
+        compatible = "snps,dw-apb-gpio-port";
+        reg = <1>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        snps,nr-gpios = <8>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
deleted file mode 100644
index 839dd32ffe11..000000000000
--- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* Synopsys DesignWare APB GPIO controller
-
-Required properties:
-- compatible : Should contain "snps,dw-apb-gpio"
-- reg : Address and length of the register set for the device.
-- #address-cells : should be 1 (for addressing port subnodes).
-- #size-cells : should be 0 (port subnodes).
-
-The GPIO controller has a configurable number of ports, each of which are
-represented as child nodes with the following properties:
-
-Required properties:
-- compatible : "snps,dw-apb-gpio-port"
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- reg : The integer port index of the port, a single cell.
-
-Optional properties:
-- interrupt-controller : The first port may be configured to be an interrupt
-controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt.  Shall be set to 2.  The first cell defines the interrupt number,
-  the second encodes the triger flags encoded as described in
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- interrupts : The interrupts to the parent controller raised when GPIOs
-  generate the interrupts. If the controller provides one combined interrupt
-  for all GPIOs, specify a single interrupt. If the controller provides one
-  interrupt for each GPIO, provide a list of interrupts that correspond to each
-  of the GPIO pins. When specifying multiple interrupts, if any are unconnected,
-  use the interrupts-extended property to specify the interrupts and set the
-  interrupt controller handle for unused interrupts to 0.
-- snps,nr-gpios : The number of pins in the port, a single cell.
-- resets : Reset line for the controller.
-
-Example:
-
-gpio: gpio@20000 {
-	compatible = "snps,dw-apb-gpio";
-	reg = <0x20000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	porta: gpio@0 {
-		compatible = "snps,dw-apb-gpio-port";
-		gpio-controller;
-		#gpio-cells = <2>;
-		snps,nr-gpios = <8>;
-		reg = <0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&vic1>;
-		interrupts = <0>;
-	};
-
-	portb: gpio@1 {
-		compatible = "snps,dw-apb-gpio-port";
-		gpio-controller;
-		#gpio-cells = <2>;
-		snps,nr-gpios = <8>;
-		reg = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 0407e45eb8c4..a7a67e0a42e5 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -16,33 +16,33 @@ properties:
     oneOf:
       - items:
           - enum:
-             - samsung,exynos5250-mali
+              - samsung,exynos5250-mali
           - const: arm,mali-t604
       - items:
           - enum:
-             - samsung,exynos5420-mali
+              - samsung,exynos5420-mali
           - const: arm,mali-t628
       - items:
           - enum:
-             - allwinner,sun50i-h6-mali
+              - allwinner,sun50i-h6-mali
           - const: arm,mali-t720
       - items:
           - enum:
-             - amlogic,meson-gxm-mali
-             - realtek,rtd1295-mali
+              - amlogic,meson-gxm-mali
+              - realtek,rtd1295-mali
           - const: arm,mali-t820
       - items:
           - enum:
-             - arm,juno-mali
+              - arm,juno-mali
           - const: arm,mali-t624
       - items:
           - enum:
-             - rockchip,rk3288-mali
-             - samsung,exynos5433-mali
+              - rockchip,rk3288-mali
+              - samsung,exynos5433-mali
           - const: arm,mali-t760
       - items:
           - enum:
-             - rockchip,rk3399-mali
+              - rockchip,rk3399-mali
           - const: arm,mali-t860
 
           # "arm,mali-t830"
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index f5401cc8de4a..4869258daadb 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -107,6 +107,9 @@ properties:
 
   operating-points-v2: true
 
+  "#cooling-cells":
+    const: 2
+
 required:
   - compatible
   - reg
@@ -164,6 +167,7 @@ examples:
       clocks = <&ccu 1>, <&ccu 2>;
       clock-names = "bus", "core";
       resets = <&ccu 1>;
+      #cooling-cells = <2>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
index 0bc4b38d5cbb..e1ac6ff5a230 100644
--- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
+++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -9,7 +9,7 @@ title: Vivante GPU Bindings
 description: Vivante GPU core devices
 
 maintainers:
-  -  Lucas Stach <l.stach@pengutronix.de>
+  - Lucas Stach <l.stach@pengutronix.de>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
new file mode 100644
index 000000000000..dc0952f3780f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence I2C controller Device Tree Bindings
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cdns,i2c-r1p10 # cadence i2c controller version 1.0
+      - cdns,i2c-r1p14 # cadence i2c controller version 1.4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 400000
+    description: |
+      Desired operating frequency, in Hz, of the bus.
+
+  clock-name:
+    const: pclk
+    description: |
+      Input clock name.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c@e0004000 {
+        compatible = "cdns,i2c-r1p10";
+        clocks = <&clkc 38>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        reg = <0xe0004000 0x1000>;
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
deleted file mode 100644
index ebaa90c58c8e..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Binding for the Cadence I2C controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Should contain one of:
-		* "cdns,i2c-r1p10"
-		Note:	Use this when cadence i2c controller version 1.0 is used.
-		* "cdns,i2c-r1p14"
-		Note:	Use this when cadence i2c controller version 1.4 is used.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt bindings.
-  - #address-cells: Should be 1.
-  - #size-cells: Should be 0.
-
-Optional properties:
-  - clock-frequency: Desired operating frequency, in Hz, of the bus.
-  - clock-names: Input clock name, should be 'pclk'.
-
-Example:
-	i2c@e0004000 {
-		compatible = "cdns,i2c-r1p10";
-		clocks = <&clkc 38>;
-		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-		reg = <0xe0004000 0x1000>;
-		clock-frequency = <400000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
new file mode 100644
index 000000000000..c6668b7c66e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
@@ -0,0 +1,92 @@
+Qualcomm Camera Control Interface (CCI) I2C controller
+
+PROPERTIES:
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		"qcom,msm8916-cci"
+		"qcom,msm8996-cci"
+		"qcom,sdm845-cci"
+
+- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address CCI I2C controller and length of memory
+		    mapped region.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: specifies the CCI I2C interrupt. The format of the
+		    specifier is defined by the binding document describing
+		    the node's interrupt parent.
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: a list of phandle, should contain an entry for each
+		    entries in clock-names.
+
+- clock-names
+	Usage: required
+	Value type: <string>
+	Definition: a list of clock names, must include "cci" clock.
+
+- power-domains
+	Usage: required for "qcom,msm8996-cci"
+	Value type: <prop-encoded-array>
+	Definition:
+
+SUBNODES:
+
+The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and
+sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
+
+PROPERTIES:
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: Index of the CCI bus/master
+
+- clock-frequency:
+	Usage: optional
+	Value type: <u32>
+	Definition: Desired I2C bus clock frequency in Hz, defaults to 100
+		    kHz if omitted.
+
+Example:
+
+	cci@a0c000 {
+		compatible = "qcom,msm8996-cci";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xa0c000 0x1000>;
+		interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
+			 <&mmcc CAMSS_TOP_AHB_CLK>,
+			 <&mmcc CAMSS_CCI_AHB_CLK>,
+			 <&mmcc CAMSS_CCI_CLK>,
+			 <&mmcc CAMSS_AHB_CLK>;
+		clock-names = "mmss_mmagic_ahb",
+			      "camss_top_ahb",
+			      "cci_ahb",
+			      "cci",
+			      "camss_ahb";
+
+		i2c-bus@0 {
+			reg = <0>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c-bus@1 {
+			reg = <1>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
index 61eac76c84c4..790aa7218ee0 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -28,14 +28,14 @@ properties:
       - const: rockchip,rk3399-i2c
       - items:
           - enum:
-            - rockchip,rk3036-i2c
-            - rockchip,rk3368-i2c
+              - rockchip,rk3036-i2c
+              - rockchip,rk3368-i2c
           - const: rockchip,rk3288-i2c
       - items:
           - enum:
-            - rockchip,px30-i2c
-            - rockchip,rk3308-i2c
-            - rockchip,rk3328-i2c
+              - rockchip,px30-i2c
+              - rockchip,rk3308-i2c
+              - rockchip,rk3328-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt b/Documentation/devicetree/bindings/i2c/i2c-xiic.txt
deleted file mode 100644
index caf42e989462..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Xilinx IIC controller:
-
-Required properties:
-- compatible : Must be "xlnx,xps-iic-2.00.a"
-- reg : IIC register location and length
-- interrupts : IIC controller unterrupt
-- #address-cells = <1>
-- #size-cells = <0>
-- clocks: Input clock specifier. Refer to common clock bindings.
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-- clock-names: Input clock name, should be 'pclk'.
-
-Example:
-
-	axi_iic_0: i2c@40800000 {
-		compatible = "xlnx,xps-iic-2.00.a";
-		clocks = <&clkc 15>;
-		interrupts = < 1 2 >;
-		reg = < 0x40800000 0x10000 >;
-
-		#size-cells = <0>;
-		#address-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 9a53df4243c6..819436b48fae 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -2,32 +2,26 @@ Generic device tree bindings for I2C busses
 ===========================================
 
 This document describes generic bindings which can be used to describe I2C
-busses in a device tree.
+busses and their child devices in a device tree.
 
-Required properties
--------------------
+Required properties (per bus)
+-----------------------------
 
 - #address-cells  - should be <1>. Read more about addresses below.
 - #size-cells     - should be <0>.
-- compatible      - name of I2C bus controller following generic names
-		    recommended practice.
+- compatible      - name of I2C bus controller
 
 For other required properties e.g. to describe register sets,
 clocks, etc. check the binding documentation of the specific driver.
 
 The cells properties above define that an address of children of an I2C bus
-are described by a single value. This is usually a 7 bit address. However,
-flags can be attached to the address. I2C_TEN_BIT_ADDRESS is used to mark a 10
-bit address. It is needed to avoid the ambiguity between e.g. a 7 bit address
-of 0x50 and a 10 bit address of 0x050 which, in theory, can be on the same bus.
-Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we listen to
-be devices ourselves.
+are described by a single value.
 
-Optional properties
--------------------
+Optional properties (per bus)
+-----------------------------
 
 These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt the bindings below.
+wants to support one of the below features, it should adapt these bindings.
 
 - clock-frequency
 	frequency of bus clock in Hz.
@@ -73,31 +67,49 @@ wants to support one of the below features, it should adapt the bindings below.
 	i2c bus clock frequency (clock-frequency).
 	Specified in Hz.
 
-- interrupts
-	interrupts used by the device.
-
-- interrupt-names
-	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
-	other names are	left to individual drivers.
-
-- host-notify
-	device uses SMBus host notify protocol instead of interrupt line.
-
 - multi-master
 	states that there is another master active on this bus. The OS can use
 	this information to adapt power management to keep the arbitration awake
 	all the time, for example.
 
-- wakeup-source
-	device can be used as a wakeup source.
+Required properties (per child device)
+--------------------------------------
+
+- compatible
+	name of I2C slave device
 
 - reg
-	I2C slave addresses
+	One or many I2C slave addresses. These are usually a 7 bit addresses.
+	However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is
+	used to mark a 10 bit address. It is needed to avoid the ambiguity
+	between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050
+	which, in theory, can be on the same bus.
+	Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we
+	listen to be devices ourselves.
+
+Optional properties (per child device)
+--------------------------------------
+
+These properties may not be supported by all drivers. However, if a driver
+wants to support one of the below features, it should adapt these bindings.
+
+- host-notify
+	device uses SMBus host notify protocol instead of interrupt line.
+
+- interrupts
+	interrupts used by the device.
+
+- interrupt-names
+	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
+	other names are	left to individual drivers.
 
 - reg-names
 	Names of map programmable addresses.
 	It can contain any map needing another address than default one.
 
+- wakeup-source
+	device can be used as a wakeup source.
+
 Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first
 interrupt if not using interrupt names) as primary interrupt for the slave.
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index 900ec1ab6a47..472087b56e19 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -17,6 +17,7 @@ allOf:
           contains:
             enum:
               - st,stm32f7-i2c
+              - st,stm32mp15-i2c
     then:
       properties:
         i2c-scl-rising-time-ns:
@@ -52,6 +53,7 @@ properties:
     enum:
       - st,stm32f4-i2c
       - st,stm32f7-i2c
+      - st,stm32mp15-i2c
 
   reg:
     maxItems: 1
@@ -80,11 +82,11 @@ properties:
   clock-frequency:
     description: Desired I2C bus clock frequency in Hz. If not specified,
                  the default 100 kHz frequency will be used.
-                 For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode,
-                 Fast-mode and Fast-mode Plus are supported, possible
-                 values are 100000, 400000 and 1000000.
+                 For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters
+                 match, the bus clock frequency can be from 1Hz to 1MHz.
     default: 100000
-    enum: [100000, 400000, 1000000]
+    minimum: 1
+    maximum: 1000000
 
 required:
   - compatible
@@ -121,12 +123,12 @@ examples:
           clocks = <&rcc 1 CLK_I2C1>;
       };
 
-    //Example 3 (with st,stm32f7-i2c compatible on stm32mp)
+    //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
       i2c@40013000 {
-          compatible = "st,stm32f7-i2c";
+          compatible = "st,stm32mp15-i2c";
           #address-cells = <1>;
           #size-cells = <0>;
           reg = <0x40013000 0x400>;
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
new file mode 100644
index 000000000000..67c1c84ba3dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ilinx IIC controller Device Tree Bindings
+
+maintainers:
+  - info@mocean-labs.com
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: xlnx,xps-iic-2.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  clock-name:
+    const: pclk
+    description: |
+      Input clock name.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    axi_iic_0: i2c@40800000 {
+      compatible = "xlnx,xps-iic-2.00.a";
+      clocks = <&clkc 15>;
+      interrupts = < 1 2 >;
+      reg = < 0x40800000 0x10000 >;
+
+      #size-cells = <0>;
+      #address-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index f0934b295edc..97087a45ce54 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -72,8 +72,8 @@ patternProperties:
           The channel number. It can have up to 8 channels on ad7124-4
           and 16 channels on ad7124-8, numbered from 0 to 15.
         items:
-         minimum: 0
-         maximum: 15
+          minimum: 0
+          maximum: 15
 
       adi,reference-select:
         description: |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
new file mode 100644
index 000000000000..c4f57fa6aad1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9467 High-Speed ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital
+  converter (ADC).
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad9467
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  powerdown-gpios:
+    description:
+      Pin that controls the powerdown mode of the device.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reset pin for the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad9467";
+          reg = <0>;
+          clocks = <&adc_clk>;
+          clock-names = "adc-clk";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
new file mode 100644
index 000000000000..0924b2b4972b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI ADC IP core
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  Analog Devices Generic AXI ADC IP core for interfacing an ADC device
+  with a high speed serial (JESD204B/C) or source synchronous parallel
+  interface (LVDS/CMOS).
+  Usually, some other interface type (i.e SPI) is used as a control
+  interface for the actual ADC, while this IP core will interface
+  to the data-lines of the ADC and handle the streaming of data into
+  memory via DMA.
+
+  https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-adc-10.0.a
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx
+
+  adi,adc-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A reference to a the actual ADC to which this FPGA ADC interfaces to.
+
+required:
+  - compatible
+  - dmas
+  - reg
+  - adi,adc-dev
+
+additionalProperties: false
+
+examples:
+  - |
+    axi-adc@44a00000 {
+          compatible = "adi,axi-adc-10.0.a";
+          reg = <0x44a00000 0x10000>;
+          dmas = <&rx_dma 0>;
+          dma-names = "rx";
+
+          adi,adc-dev = <&spi_adc>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 118809a03279..97f521d654ea 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Linear Technology / Analog Devices LTC2496 ADC
 
 maintainers:
- - Lars-Peter Clausen <lars@metafoo.de>
- - Michael Hennerich <Michael.Hennerich@analog.com>
- - Stefan Popa <stefan.popa@analog.com>
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Stefan Popa <stefan.popa@analog.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
new file mode 100644
index 000000000000..f562505f5ecd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Alexandru Lazar
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1241 12-bit, single-channel analog to digital converter
+
+maintainers:
+  - Alexandru Lazar <alazar@startmail.com>
+
+description: |
+  Bindings for the max1241 12-bit, single-channel ADC device. Datasheet
+  can be found at:
+    https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1241
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Device tree identifier of the regulator that powers the ADC.
+
+  vref-supply:
+    description:
+      Device tree identifier of the regulator that provides the external
+      reference voltage.
+
+  shutdown-gpios:
+    description:
+      GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If
+      specified, the /SHDN pin will be asserted between conversions,
+      thus enabling power-down mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vref-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1241";
+            reg = <0>;
+            vdd-supply = <&adc_vdd>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+            shutdown-gpios = <&gpio 26 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
deleted file mode 100644
index c2c50b59873d..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Rockchip Successive Approximation Register (SAR) A/D Converter bindings
-
-Required properties:
-- compatible: should be "rockchip,<name>-saradc" or "rockchip,rk3066-tsadc"
-   - "rockchip,saradc": for rk3188, rk3288
-   - "rockchip,rk3066-tsadc": for rk3036
-   - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328
-   - "rockchip,rk3399-saradc": for rk3399
-   - "rockchip,rv1108-saradc", "rockchip,rk3399-saradc": for rv1108
-
-- reg: physical base address of the controller and length of memory mapped
-       region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-              depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for
-               the peripheral clock.
-- vref-supply: The regulator supply ADC reference voltage.
-- #io-channel-cells: Should be 1, see ../iio-bindings.txt
-
-Optional properties:
-- resets: Must contain an entry for each entry in reset-names if need support
-	  this option. See ../reset/reset.txt for details.
-- reset-names: Must include the name "saradc-apb".
-
-Example:
-	saradc: saradc@2006c000 {
-		compatible = "rockchip,saradc";
-		reg = <0x2006c000 0x100>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
-		clock-names = "saradc", "apb_pclk";
-		resets = <&cru SRST_SARADC>;
-		reset-names = "saradc-apb";
-		#io-channel-cells = <1>;
-		vref-supply = <&vcc18>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
new file mode 100644
index 000000000000..bcff82a423bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rockchip-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Successive Approximation Register (SAR) A/D Converter
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,saradc
+      - const: rockchip,rk3066-tsadc
+      - const: rockchip,rk3399-saradc
+      - items:
+          - enum:
+            - rockchip,px30-saradc
+            - rockchip,rk3308-saradc
+            - rockchip,rk3328-saradc
+            - rockchip,rv1108-saradc
+          - const: rockchip,rk3399-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: converter clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: saradc
+      - const: apb_pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: saradc-apb
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    saradc: saradc@2006c000 {
+      compatible = "rockchip,saradc";
+      reg = <0x2006c000 0x100>;
+      interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+      clock-names = "saradc", "apb_pclk";
+      resets = <&cru SRST_SARADC>;
+      reset-names = "saradc-apb";
+      vref-supply = <&vcc18>;
+      #io-channel-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml
new file mode 100644
index 000000000000..97ffcb77043d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/common.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for iio sensors
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Guido Günther <agx@sigxcpu.org>
+
+description: |
+  This document defines device tree properties common to several iio
+  sensors. It doesn't constitue a device tree binding specification by itself but
+  is meant to be referenced by device tree bindings.
+
+  When referenced from sensor tree bindings the properties defined in this
+  document are defined as follows. The sensor tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  proximity-near-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      For proximity sensors whether an object can be considered near to the
+      device depends on parameters like sensor position, covering glass and
+      aperture. This value gives an indication to userspace for which
+      sensor readings this is the case.
+
+      Raw proximity values equal or above this level should be
+      considered 'near' to the device (an object is near to the
+      sensor).
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
deleted file mode 100644
index bf2925c671c6..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-STMicroelectronics STM32 DAC
-
-The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
-may be configured in 8 or 12-bit mode. It has two output channels, each with
-its own converter.
-It has built-in noise and triangle waveform generator and supports external
-triggers for conversions. The DAC's output buffer allows a high drive output
-current.
-
-Contents of a stm32 dac root node:
------------------------------------
-Required properties:
-- compatible: Should be one of:
-  "st,stm32f4-dac-core"
-  "st,stm32h7-dac-core"
-- reg: Offset and length of the device's register set.
-- clocks: Must contain an entry for pclk (which feeds the peripheral bus
-  interface)
-- clock-names: Must be "pclk".
-- vref-supply: Phandle to the vref+ input analog reference supply.
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- resets: Must contain the phandle to the reset controller.
-- A pinctrl state named "default" for each DAC channel may be defined to set
-  DAC_OUTx pin in mode of operation for analog output on external pin.
-
-Contents of a stm32 dac child node:
------------------------------------
-DAC core node should contain at least one subnode, representing a
-DAC instance/channel available on the machine.
-
-Required properties:
-- compatible: Must be "st,stm32-dac".
-- reg: Must be either 1 or 2, to define (single) channel in use
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
-  Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-Example:
-	dac: dac@40007400 {
-		compatible = "st,stm32h7-dac-core";
-		reg = <0x40007400 0x400>;
-		clocks = <&clk>;
-		clock-names = "pclk";
-		vref-supply = <&reg_vref>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dac_out1 &dac_out2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dac1: dac@1 {
-			compatible = "st,stm32-dac";
-			#io-channels-cells = <1>;
-			reg = <1>;
-		};
-
-		dac2: dac@2 {
-			compatible = "st,stm32-dac";
-			#io-channels-cells = <1>;
-			reg = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
new file mode 100644
index 000000000000..393f7005941a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 DAC bindings
+
+description: |
+  The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
+  may be configured in 8 or 12-bit mode. It has two output channels, each with
+  its own converter.
+  It has built-in noise and triangle waveform generator and supports external
+  triggers for conversions. The DAC's output buffer allows a high drive output
+  current.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-dac-core
+      - st,stm32h7-dac-core
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  vref-supply:
+    description: Phandle to the vref input analog reference voltage.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^dac@[1-2]+$":
+    type: object
+    description:
+      A DAC block node should contain at least one subnode, representing an
+      DAC instance/channel available on the machine.
+
+    properties:
+      compatible:
+        const: st,stm32-dac
+
+      reg:
+        description: Must be either 1 or 2, to define (single) channel in use
+        enum: [1, 2]
+
+      '#io-channel-cells':
+        const: 1
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - '#io-channel-cells'
+
+examples:
+  - |
+    // Example on stm32mp157c
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dac: dac@40017000 {
+      compatible = "st,stm32h7-dac-core";
+      reg = <0x40017000 0x400>;
+      clocks = <&rcc DAC12>;
+      clock-names = "pclk";
+      vref-supply = <&vref>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@1 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <1>;
+      };
+
+      dac@2 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <2>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
index 78e18a1e9c1d..bb43d1ad9c9f 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 
-  - compatible : should be "bosch,bmg160" or "bosch,bmi055_gyro"
+  - compatible : should be "bosch,bmg160", "bosch,bmi055_gyro" or "bosch,bmi088_gyro"
   - reg : the I2C address of the sensor (0x69)
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
new file mode 100644
index 000000000000..efd2eba5f23c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS TAOS TSL2563 ambient light sensor
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Ambient light sensor with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2560
+      - amstaos,tsl2561
+      - amstaos,tsl2562
+      - amstaos,tsl2563
+
+  reg:
+    maxItems: 1
+
+  amstaos,cover-comp-gain:
+    description: Multiplier for gain compensation
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [1, 16]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@29 {
+        compatible = "amstaos,tsl2563";
+        reg = <0x29>;
+        amstaos,cover-comp-gain = <16>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2563.txt b/Documentation/devicetree/bindings/iio/light/tsl2563.txt
deleted file mode 100644
index f91e809e736e..000000000000
--- a/Documentation/devicetree/bindings/iio/light/tsl2563.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* AMS TAOS TSL2563 ambient light sensor
-
-Required properties:
-
-  - compatible : should be "amstaos,tsl2563"
-  - reg : the I2C address of the sensor
-
-Optional properties:
-
-  - amstaos,cover-comp-gain : integer used as multiplier for gain
-                              compensation (default = 1)
-
-Example:
-
-tsl2563@29 {
-	compatible = "amstaos,tsl2563";
-	reg = <0x29>;
-	amstaos,cover-comp-gain = <16>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/vcnl4000.txt b/Documentation/devicetree/bindings/iio/light/vcnl4000.txt
deleted file mode 100644
index 955af4555c90..000000000000
--- a/Documentation/devicetree/bindings/iio/light/vcnl4000.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-VISHAY VCNL4000 -  Ambient Light and proximity sensor
-
-This driver supports the VCNL4000/10/20/40 and VCNL4200 chips
-
-Required properties:
-
-	-compatible: must be one of :
-        vishay,vcnl4000
-        vishay,vcnl4010
-        vishay,vcnl4020
-        vishay,vcnl4040
-        vishay,vcnl4200
-
-	-reg: I2C address of the sensor, should be one from below based on the model:
-        0x13
-        0x51
-        0x60
-
-Example:
-
-light-sensor@51 {
-	compatible = "vishay,vcnl4200";
-	reg = <0x51>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
new file mode 100644
index 000000000000..da8f2e872535
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VISHAY VCNL4000 ambient light and proximity sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+  Ambient light sensing with proximity detection over an i2c
+  interface.
+
+allOf:
+  - $ref: ../common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - vishay,vcnl4000
+      - vishay,vcnl4010
+      - vishay,vcnl4020
+      - vishay,vcnl4040
+      - vishay,vcnl4200
+  reg:
+    maxItems: 1
+
+  proximity-near-level: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+- |
+  i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@51 {
+              compatible = "vishay,vcnl4200";
+              reg = <0x51>;
+              proximity-near-level = <220>;
+      };
+  };
+...
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 0ef64a444479..3213599c5071 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -50,6 +50,7 @@ Accelerometers:
 - st,lis3dhh
 - st,lis3de
 - st,lis2de12
+- st,lis2hh12
 
 Gyroscopes:
 - st,l3g4200d-gyro
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 8fb46de6641d..04da5c48a5e9 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -260,7 +260,7 @@ patternProperties:
       - adi,rsense-handle
 
     dependencies:
-      adi,current-rotate: [ adi,rsense-share ]
+      adi,current-rotate: [ "adi,rsense-share" ]
 
   "^thermistor@":
     type: object
@@ -349,7 +349,7 @@ patternProperties:
       - adi,rsense-handle
 
     dependencies:
-      adi,current-rotate: [ adi,rsense-share ]
+      adi,current-rotate: [ "adi,rsense-share" ]
 
   "^adc@":
     type: object
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index 5b3b71c9c018..512a6af5aa42 100644
--- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -16,8 +16,8 @@ properties:
       - const: allwinner,sun4i-a10-lradc-keys
       - const: allwinner,sun8i-a83t-r-lradc
       - items:
-        - const: allwinner,sun50i-a64-lradc
-        - const: allwinner,sun8i-a83t-r-lradc
+          - const: allwinner,sun50i-a64-lradc
+          - const: allwinner,sun8i-a83t-r-lradc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
deleted file mode 100644
index 4d9a3717eaaf..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Device-Tree bindings for input/gpio_keys_polled.c keyboard driver
-
-Required properties:
-	- compatible = "gpio-keys-polled";
-	- poll-interval: Poll interval time in milliseconds
-
-Optional properties:
-	- autorepeat: Boolean, Enable auto repeat feature of Linux input
-	  subsystem.
-
-Each button (key) is represented as a sub-node of "gpio-keys-polled":
-Subnode properties:
-
-	- gpios: OF device-tree gpio specification.
-	- label: Descriptive name of the key.
-	- linux,code: Key / Axis code to emit.
-
-Optional subnode-properties:
-	- linux,input-type: Specify event type this button/key generates.
-	  If not specified defaults to <1> == EV_KEY.
-	- linux,input-value: If linux,input-type is EV_ABS or EV_REL then this
-	  value is sent for events this button generates when pressed.
-	  EV_ABS/EV_REL axis will generate an event with a value of 0 when
-	  all buttons with linux,input-type == type and linux,code == axis
-	  are released. This value is interpreted as a signed 32 bit value,
-	  e.g. to make a button generate a value of -1 use:
-	  linux,input-value = <0xffffffff>; /* -1 */
-	- debounce-interval: Debouncing interval time in milliseconds.
-	  If not specified defaults to 5.
-	- wakeup-source: Boolean, button can wake-up the system.
-			 (Legacy property supported: "gpio-key,wakeup")
-
-Example nodes:
-
-	gpio_keys_polled {
-			compatible = "gpio-keys-polled";
-			poll-interval = <100>;
-			autorepeat;
-
-			button21 {
-				label = "GPIO Key UP";
-				linux,code = <103>;
-				gpios = <&gpio1 0 1>;
-			};
-			...
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
deleted file mode 100644
index 7cccc49b6bea..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
-
-Required properties:
-	- compatible = "gpio-keys";
-
-Optional properties:
-	- autorepeat: Boolean, Enable auto repeat feature of Linux input
-	  subsystem.
-	- label: String, name of the input device.
-
-Each button (key) is represented as a sub-node of "gpio-keys":
-Subnode properties:
-
-	- gpios: OF device-tree gpio specification.
-	- interrupts: the interrupt line for that input.
-	- label: Descriptive name of the key.
-	- linux,code: Keycode to emit.
-
-Note that either "interrupts" or "gpios" properties can be omitted, but not
-both at the same time. Specifying both properties is allowed.
-
-Optional subnode-properties:
-	- linux,input-type: Specify event type this button/key generates.
-	  If not specified defaults to <1> == EV_KEY.
-	- debounce-interval: Debouncing interval time in milliseconds.
-	  If not specified defaults to 5.
-	- wakeup-source: Boolean, button can wake-up the system.
-			 (Legacy property supported: "gpio-key,wakeup")
-	- wakeup-event-action: Specifies whether the key should wake the
-	  system when asserted, when deasserted, or both. This property is
-	  only valid for keys that wake up the system (e.g., when the
-	  "wakeup-source" property is also provided).
-	  Supported values are defined in linux-event-codes.h:
-		EV_ACT_ASSERTED		- asserted
-		EV_ACT_DEASSERTED	- deasserted
-		EV_ACT_ANY		- both asserted and deasserted
-	- linux,can-disable: Boolean, indicates that button is connected
-	  to dedicated (not shared) interrupt which can be disabled to
-	  suppress events from the button.
-
-Example nodes:
-
-	gpio-keys {
-			compatible = "gpio-keys";
-			autorepeat;
-
-			up {
-				label = "GPIO Key UP";
-				linux,code = <103>;
-				gpios = <&gpio1 0 1>;
-			};
-
-			down {
-				label = "GPIO Key DOWN";
-				linux,code = <108>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-			};
-			...
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
new file mode 100644
index 000000000000..c0b389572340
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for GPIO attached keys
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - gpio-keys
+      - gpio-keys-polled
+
+patternProperties:
+  ".*":
+    if:
+      type: object
+    then:
+      allOf:
+        - $ref: input.yaml#
+
+      properties:
+        gpios:
+          maxItems: 1
+
+        interrupts:
+          maxItems: 1
+
+        label:
+          description: Descriptive name of the key.
+
+        linux,code:
+          description: Key / Axis code to emit.
+          $ref: /schemas/types.yaml#definitions/uint32
+
+        linux,input-type:
+          description:
+            Specify event type this button/key generates. If not specified defaults to
+            <1> == EV_KEY.
+          allOf:
+            - $ref: /schemas/types.yaml#definitions/uint32
+          default: 1
+
+        linux,input-value:
+          description: |
+            If linux,input-type is EV_ABS or EV_REL then this
+            value is sent for events this button generates when pressed.
+            EV_ABS/EV_REL axis will generate an event with a value of 0
+            when all buttons with linux,input-type == type and
+            linux,code == axis are released. This value is interpreted
+            as a signed 32 bit value, e.g. to make a button generate a
+            value of -1 use:
+
+            linux,input-value = <0xffffffff>; /* -1 */
+
+          allOf:
+            - $ref: /schemas/types.yaml#definitions/uint32
+
+        debounce-interval:
+          description:
+            Debouncing interval time in milliseconds. If not specified defaults to 5.
+          allOf:
+            - $ref: /schemas/types.yaml#definitions/uint32
+          default: 5
+
+        wakeup-source:
+          description: Button can wake-up the system.
+
+        wakeup-event-action:
+          description: |
+            Specifies whether the key should wake the system when asserted, when
+            deasserted, or both. This property is only valid for keys that wake up the
+            system (e.g., when the "wakeup-source" property is also provided).
+
+            Supported values are defined in linux-event-codes.h:
+
+              EV_ACT_ANY        - both asserted and deasserted
+              EV_ACT_ASSERTED   - asserted
+              EV_ACT_DEASSERTED - deasserted
+          allOf:
+            - $ref: /schemas/types.yaml#definitions/uint32
+          enum: [ 0, 1, 2 ]
+
+        linux,can-disable:
+          description:
+            Indicates that button is connected to dedicated (not shared) interrupt
+            which can be disabled to suppress events from the button.
+          type: boolean
+
+        pinctrl-0:
+          maxItems: 1
+
+        pinctrl-names:
+          maxItems: 1
+
+      required:
+        - linux,code
+
+      anyOf:
+        - required:
+            - interrupts
+        - required:
+            - gpios
+
+      dependencies:
+        wakeup-event-action: [ wakeup-source ]
+        linux,input-value: [ gpios ]
+
+      unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      const: gpio-keys-polled
+then:
+  properties:
+    poll-interval:
+      description:
+        Poll interval time in milliseconds
+      $ref: /schemas/types.yaml#definitions/uint32
+
+  required:
+    - poll-interval
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio-keys {
+        compatible = "gpio-keys";
+        autorepeat;
+
+        up {
+            label = "GPIO Key UP";
+            linux,code = <103>;
+            gpios = <&gpio1 0 1>;
+        };
+
+        down {
+            label = "GPIO Key DOWN";
+            linux,code = <108>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index c8ea9434c9cc..e81cfa56f25a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -63,7 +63,7 @@ required:
   - interrupts
 
 examples:
-- |
+  - |
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
index 2cd954051d29..707234cfd7e6 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
@@ -1,9 +1,10 @@
-* MELFAS MMS114/MMS152 touchscreen controller
+* MELFAS MMS114/MMS152/MMS345L touchscreen controller
 
 Required properties:
 - compatible: should be one of:
 	- "melfas,mms114"
 	- "melfas,mms152"
+	- "melfas,mms345l"
 - reg: I2C address of the chip
 - interrupts: interrupt to which the chip is connected
 - touchscreen-size-x: See [1]
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
index 4107e60cab12..e1009ae4e8f7 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
@@ -10,8 +10,8 @@ maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
 
 description: |
-   The Qualcomm MSM8916 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
+  The Qualcomm MSM8916 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
index 9af3c6e59cff..8004c4baf397 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
@@ -10,8 +10,8 @@ maintainers:
   - Brian Masney <masneyb@onstation.org>
 
 description: |
-   The Qualcomm MSM8974 interconnect providers support setting system
-   bandwidth requirements between various network-on-chip fabrics.
+  The Qualcomm MSM8974 interconnect providers support setting system
+  bandwidth requirements between various network-on-chip fabrics.
 
 properties:
   reg:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
index 8d65c5f80679..3fbb8785fbc9 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
@@ -10,8 +10,8 @@ maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
 
 description: |
-   The Qualcomm QCS404 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
+  The Qualcomm QCS404 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
 
 properties:
   reg:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index cf09055da78b..7cd6b8bacfa0 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -27,15 +27,15 @@ properties:
         deprecated: true
       - const: allwinner,sun7i-a20-sc-nmi
       - items:
-        - const: allwinner,sun8i-a83t-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun8i-a83t-r-intc
+          - const: allwinner,sun6i-a31-r-intc
       - const: allwinner,sun9i-a80-sc-nmi
       - items:
-        - const: allwinner,sun50i-a64-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun50i-a64-r-intc
+          - const: allwinner,sun6i-a31-r-intc
       - items:
-        - const: allwinner,sun50i-h6-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun50i-h6-r-intc
+          - const: allwinner,sun6i-a31-r-intc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
index ccc507f384d2..14dced11877b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -25,10 +25,10 @@ properties:
   compatible:
     items:
       - enum:
-        - intel,ixp42x-interrupt
-        - intel,ixp43x-interrupt
-        - intel,ixp45x-interrupt
-        - intel,ixp46x-interrupt
+          - intel,ixp42x-interrupt
+          - intel,ixp43x-interrupt
+          - intel,ixp45x-interrupt
+          - intel,ixp46x-interrupt
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
index 9e5c6608b4e3..2a5b29567926 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
@@ -14,13 +14,13 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32-exti
-          - st,stm32h7-exti
+          - enum:
+              - st,stm32-exti
+              - st,stm32h7-exti
       - items:
-        - enum:
-          - st,stm32mp1-exti
-        - const: syscon
+          - enum:
+              - st,stm32mp1-exti
+          - const: syscon
 
   "#interrupt-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index 0e33cd9e010e..af51b91c893e 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -54,13 +54,13 @@ properties:
   clock-names:
     oneOf:
       - items:
-        - const: sysmmu
+          - const: sysmmu
       - items:
-        - const: sysmmu
-        - const: master
+          - const: sysmmu
+          - const: master
       - items:
-        - const: aclk
-        - const: pclk
+          - const: aclk
+          - const: pclk
 
   "#iommu-cells":
     const: 0
diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
new file mode 100644
index 000000000000..ecf7ac9ab067
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-sgm3140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SGMICRO SGM3140 500mA Buck/Boost Charge Pump LED Driver
+
+maintainers:
+  - Luca Weiss <luca@z3ntu.xyz>
+
+description: |
+  The SGM3140 is a current-regulated charge pump which can regulate two current
+  levels for Flash and Torch modes.
+
+  The data sheet can be found at:
+    http://www.sg-micro.com/uploads/soft/20190626/1561535688.pdf
+
+properties:
+  compatible:
+    const: sgmicro,sgm3140
+
+  enable-gpios:
+    maxItems: 1
+    description: A connection to the 'EN' pin.
+
+  flash-gpios:
+    maxItems: 1
+    description: A connection to the 'FLASH' pin.
+
+  vin-supply:
+    description: Regulator providing power to the 'VIN' pin.
+
+  led:
+    type: object
+    allOf:
+      - $ref: common.yaml#
+
+required:
+  - compatible
+  - flash-gpios
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "sgmicro,sgm3140";
+        flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+        enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+        vin-supply = <&reg_dcdc1>;
+
+        sgm3140_flash: led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            flash-max-timeout-us = <250000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
index 31486c9f6443..26b7a88c2fea 100644
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
@@ -51,7 +51,7 @@ Optional properties:
 Examples:
 --------
 lsio_mu0: mailbox@5d1b0000 {
-	compatible = "fsl,imx8qxp-mu";
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
 	reg = <0x0 0x5d1b0000 0x0 0x10000>;
 	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
 	#mbox-cells = <2>;
diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
index 5b13d6672996..db851541d619 100644
--- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
@@ -24,7 +24,7 @@ properties:
     maxItems: 1
 
   clocks:
-     maxItems: 1
+    maxItems: 1
 
   interrupts:
     items:
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
index 8453ee340b9f..09318830db47 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -20,11 +20,11 @@ properties:
       - const: allwinner,sun4i-a10-csi1
       - const: allwinner,sun7i-a20-csi0
       - items:
-        - const: allwinner,sun7i-a20-csi1
-        - const: allwinner,sun4i-a10-csi1
+          - const: allwinner,sun7i-a20-csi1
+          - const: allwinner,sun4i-a10-csi1
       - items:
-        - const: allwinner,sun8i-r40-csi0
-        - const: allwinner,sun7i-a20-csi0
+          - const: allwinner,sun8i-r40-csi0
+          - const: allwinner,sun7i-a20-csi0
 
   reg:
     maxItems: 1
@@ -35,24 +35,24 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The CSI interface clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI DRAM clock
 
       - items:
-        - description: The CSI interface clock
-        - description: The CSI ISP clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI ISP clock
+          - description: The CSI DRAM clock
 
   clock-names:
     oneOf:
       - items:
-        - const: bus
-        - const: ram
+          - const: bus
+          - const: ram
 
       - items:
-        - const: bus
-        - const: isp
-        - const: ram
+          - const: bus
+          - const: isp
+          - const: ram
 
   resets:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 37d77e065491..5a1da4029c37 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -29,14 +29,14 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,gxbb-vdec # GXBB (S905)
-          - amlogic,gxl-vdec # GXL (S905X, S905D)
-          - amlogic,gxm-vdec # GXM (S912)
-        - const: amlogic,gx-vdec
+          - enum:
+              - amlogic,gxbb-vdec # GXBB (S905)
+              - amlogic,gxl-vdec # GXL (S905X, S905D)
+              - amlogic,gxm-vdec # GXM (S912)
+          - const: amlogic,gx-vdec
       - enum:
-        - amlogic,g12a-vdec # G12A (S905X2, S905D2)
-        - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
+          - amlogic,g12a-vdec # G12A (S905X2, S905D2)
+          - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
 
   interrupts:
     minItems: 2
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index fcb5f13704a5..f2393458814e 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -32,23 +32,23 @@ properties:
     additionalProperties: false
 
     properties:
-       endpoint:
-         type: object
-         additionalProperties: false
+      endpoint:
+        type: object
+        additionalProperties: false
 
          # Properties described in
          # Documentation/devicetree/bindings/media/video-interfaces.txt
-         properties:
-           remote-endpoint: true
-           hsync-active: true
-           vsync-active: true
-           field-even-active: false
-           bus-width:
-             enum: [8, 16]
-             default: 8
-
-         required:
-           - remote-endpoint
+        properties:
+          remote-endpoint: true
+          hsync-active: true
+          vsync-active: true
+          field-even-active: false
+          bus-width:
+            enum: [8, 16]
+            default: 8
+
+        required:
+          - remote-endpoint
 
     required:
       - endpoint
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index 1ec947b4781f..ecc09f1124d4 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -261,13 +261,13 @@ properties:
 
         anyOf:
           - required:
-            - endpoint@0
+              - endpoint@0
           - required:
-            - endpoint@1
+              - endpoint@1
           - required:
-            - endpoint@2
+              - endpoint@2
           - required:
-            - endpoint@3
+              - endpoint@3
 
         additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
new file mode 100644
index 000000000000..0c68cdad9a31
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip,vdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Video Decoder (VDec) Device Tree Bindings
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |-
+  The Rockchip rk3399 has a stateless Video Decoder that can decodes H.264,
+  HEVC an VP9 streams.
+
+properties:
+  compatible:
+    const: rockchip,rk3399-vdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The Video Decoder AXI interface clock
+      - description: The Video Decoder AHB interface clock
+      - description: The Video Decoded CABAC clock
+      - description: The Video Decoder core clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: cabac
+      - const: core
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    vdec: video-codec@ff660000 {
+        compatible = "rockchip,rk3399-vdec";
+        reg = <0x0 0xff660000 0x0 0x400>;
+        interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
+                 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
+        clock-names = "axi", "ahb", "cabac", "core";
+        power-domains = <&power RK3399_PD_VDU>;
+        iommus = <&vdec_mmu>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt
deleted file mode 100644
index c53a8e5133f6..000000000000
--- a/Documentation/devicetree/bindings/media/rockchip-rga.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA)
-
-RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D
-graphics operations, such as point/line drawing, image scaling, rotation,
-BitBLT, alpha blending and image blur/sharpness.
-
-Required properties:
-- compatible: value should be one of the following
-  "rockchip,rk3228-rga", "rockchip,rk3288-rga": for Rockchip RK3228
-  "rockchip,rk3288-rga": for Rockchip RK3288
-  "rockchip,rk3399-rga": for Rockchip RK3399
-
-- interrupts: RGA interrupt specifier.
-
-- clocks: phandle to RGA sclk/hclk/aclk clocks
-
-- clock-names: should be "aclk", "hclk" and "sclk"
-
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: should be "core", "axi" and "ahb"
-
-Example:
-SoC-specific DT entry:
-	rga: rga@ff680000 {
-		compatible = "rockchip,rk3399-rga";
-		reg = <0xff680000 0x10000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
-		clock-names = "aclk", "hclk", "sclk";
-
-		resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
-		reset-names = "core, "axi", "ahb";
-	};
diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
new file mode 100644
index 000000000000..dd645ddccb07
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip-rga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip 2D raster graphic acceleration controller (RGA)
+
+description:
+  RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D
+  graphics operations, such as point/line drawing, image scaling, rotation,
+  BitBLT, alpha blending and image blur/sharpness.
+
+maintainers:
+  - Jacob Chen <jacob-chen@iotwrt.com>
+  - Ezequiel Garcia <ezequiel@collabora.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3288-rga
+      - const: rockchip,rk3399-rga
+      - items:
+          - const: rockchip,rk3228-rga
+          - const: rockchip,rk3288-rga
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: sclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: core
+      - const: axi
+      - const: ahb
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    rga: rga@ff680000 {
+      compatible = "rockchip,rk3399-rga";
+      reg = <0xff680000 0x10000>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_RGA>,
+               <&cru HCLK_RGA>,
+               <&cru SCLK_RGA_CORE>;
+      clock-names = "aclk", "hclk", "sclk";
+      power-domains = <&power RK3399_PD_RGA>;
+      resets = <&cru SRST_RGA_CORE>,
+               <&cru SRST_A_RGA>,
+               <&cru SRST_H_RGA>;
+      reset-names = "core", "axi", "ahb";
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.txt b/Documentation/devicetree/bindings/media/rockchip-vpu.txt
deleted file mode 100644
index 339252d9c515..000000000000
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-device-tree bindings for rockchip VPU codec
-
-Rockchip (Video Processing Unit) present in various Rockchip platforms,
-such as RK3288, RK3328 and RK3399.
-
-Required properties:
-- compatible: value should be one of the following
-		"rockchip,rk3288-vpu";
-		"rockchip,rk3328-vpu";
-		"rockchip,rk3399-vpu";
-- interrupts: encoding and decoding interrupt specifiers
-- interrupt-names: should be
-		"vepu", "vdpu" on RK3288 and RK3399,
-		"vdpu" on RK3328.
-- clocks: phandle to VPU aclk, hclk clocks
-- clock-names: should be "aclk" and "hclk"
-- power-domains: phandle to power domain node
-- iommus: phandle to a iommu node
-
-Example:
-SoC-specific DT entry:
-	vpu: video-codec@ff9a0000 {
-		compatible = "rockchip,rk3288-vpu";
-		reg = <0x0 0xff9a0000 0x0 0x800>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vepu", "vdpu";
-		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
-		clock-names = "aclk", "hclk";
-		power-domains = <&power RK3288_PD_VIDEO>;
-		iommus = <&vpu_mmu>;
-	};
-
-	vpu: video-codec@ff350000 {
-		compatible = "rockchip,rk3328-vpu";
-		reg = <0x0 0xff350000 0x0 0x800>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vdpu";
-		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
-		clock-names = "aclk", "hclk";
-		power-domains = <&power RK3328_PD_VPU>;
-		iommus = <&vpu_mmu>;
-	};
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
new file mode 100644
index 000000000000..d7a42e6f9bcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/rockchip-vpu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Hantro G1 VPU codecs implemented on Rockchip SoCs
+
+maintainers:
+  - Ezequiel Garcia <ezequiel@collabora.com>
+
+description:
+  Hantro G1 video encode and decode accelerators present on Rockchip SoCs.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-vpu
+      - rockchip,rk3328-vpu
+      - rockchip,rk3399-vpu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: vepu
+      - const: vdpu
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3288-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3288-power.h>
+
+        vpu: video-codec@ff9a0000 {
+                compatible = "rockchip,rk3288-vpu";
+                reg = <0x0 0xff9a0000 0x0 0x800>;
+                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-names = "vepu", "vdpu";
+                clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+                clock-names = "aclk", "hclk";
+                power-domains = <&power RK3288_PD_VIDEO>;
+                iommus = <&vpu_mmu>;
+        };
diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml
index f3a8a350e85f..ef473f287399 100644
--- a/Documentation/devicetree/bindings/media/ti,vpe.yaml
+++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml
@@ -17,7 +17,7 @@ description: |-
 
 properties:
   compatible:
-      const: ti,dra7-vpe
+    const: ti,dra7-vpe
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
index cdfe3f7f0ea9..1250087b4ee6 100644
--- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
@@ -51,9 +51,7 @@ patternProperties:
         maxItems: 1
 
       reg-io-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [1, 2]
+        enum: [1, 2]
         description:
           Data width in bytes (1 or 2). If omitted, default of 1 is used.
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
index c9e6c22cb5be..445e46feda69 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -25,9 +25,9 @@ properties:
   compatible:
     items:
       - enum:
-        - fsl,imx8mn-ddrc
-        - fsl,imx8mm-ddrc
-        - fsl,imx8mq-ddrc
+          - fsl,imx8mn-ddrc
+          - fsl,imx8mm-ddrc
+          - fsl,imx8mq-ddrc
       - const: fsl,imx8m-ddrc
 
   reg:
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
new file mode 100644
index 000000000000..49ab09252e52
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra210-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 SoC External Memory Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The EMC interfaces with the off-chip SDRAM to service the request stream
+  sent from the memory controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra210-emc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    items:
+      - description: external memory clock
+
+  clock-names:
+    items:
+      - const: emc
+
+  interrupts:
+    items:
+      - description: EMC general interrupt
+
+  memory-region:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to a reserved memory region describing the table of EMC
+      frequencies trained by the firmware
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the memory controller node
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - nvidia,memory-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        emc_table: emc-table@83400000 {
+            compatible = "nvidia,tegra210-emc-table";
+            reg = <0x83400000 0x10000>;
+        };
+    };
+
+    external-memory-controller@7001b000 {
+        compatible = "nvidia,tegra210-emc";
+        reg = <0x7001b000 0x1000>,
+              <0x7001e000 0x1000>,
+              <0x7001f000 0x1000>;
+        clocks = <&tegra_car TEGRA210_CLK_EMC>;
+        clock-names = "emc";
+        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+        memory-region = <&emc_table>;
+        nvidia,memory-controller = <&mc>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index ddf190cb800b..e675611f80d0 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -66,8 +66,8 @@ patternProperties:
       reg:
         description: Identify trigger hardware block.
         items:
-         minimum: 0
-         maximum: 2
+          minimum: 0
+          maximum: 2
 
     required:
       - compatible
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
index 590849ee9f32..4acda7ce3b44 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -102,8 +102,8 @@ patternProperties:
       reg:
         description: Identify trigger hardware block.
         items:
-         minimum: 0
-         maximum: 16
+          minimum: 0
+          maximum: 16
 
     required:
       - compatible
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 39375e4313d2..7a39486b215a 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -33,13 +33,13 @@ properties:
   compatible:
     anyOf:
       - items:
-        - enum:
-          - allwinner,sun8i-a83t-system-controller
-          - allwinner,sun8i-h3-system-controller
-          - allwinner,sun8i-v3s-system-controller
-          - allwinner,sun50i-a64-system-controller
+          - enum:
+              - allwinner,sun8i-a83t-system-controller
+              - allwinner,sun8i-h3-system-controller
+              - allwinner,sun8i-v3s-system-controller
+              - allwinner,sun50i-a64-system-controller
 
-        - const: syscon
+          - const: syscon
 
       - contains:
           const: syscon
diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
index 78dcf6ef3883..d1175030781a 100644
--- a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
+++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
@@ -20,16 +20,20 @@ properties:
       - description: Qi Hardware Ben NanoNote
         items:
           - const: qi,lb60
+          - const: ingenic,jz4740
 
       - description: Game Consoles Worldwide GCW Zero
         items:
           - const: gcw,zero
+          - const: ingenic,jz4770
 
       - description: MIPS Creator CI20
         items:
           - const: img,ci20
+          - const: ingenic,jz4780
 
       - description: YSH & ATIL General Board CU Neo
         items:
           - const: yna,cu1000-neo
+          - const: ingenic,x1000
 ...
diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
new file mode 100644
index 000000000000..d317897e1115
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson RS780E PCH ACPI Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+  This controller can be found in Loongson-3 systems with RS780E PCH.
+
+properties:
+  compatible:
+    const: loongson,rs780e-acpi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    isa@0 {
+      compatible = "isa";
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <1 0 0 0x1000>;
+
+      acpi@800 {
+        compatible = "loongson,rs780e-acpi";
+        reg = <1 0x800 0x100>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 428685eb2ded..630fe707f5c4 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -18,6 +18,9 @@ Required Properties:
     - "xlnx,zynqmp-8.9a": ZynqMP SDHCI 8.9a PHY
       For this device it is strongly suggested to include clock-output-names and
       #clock-cells.
+    - "xlnx,versal-8.9a": Versal SDHCI 8.9a PHY
+      For this device it is strongly suggested to include clock-output-names and
+      #clock-cells.
     - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY
 	Note: This binding has been deprecated and moved to [5].
     - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY
@@ -104,6 +107,18 @@ Example:
 		clk-phase-sd-hs = <63>, <72>;
 	};
 
+	sdhci: mmc@f1040000 {
+		compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a";
+		interrupt-parent = <&gic>;
+		interrupts = <0 126 4>;
+		reg = <0x0 0xf1040000 0x0 0x10000>;
+		clocks = <&clk200>, <&clk200>;
+		clock-names = "clk_xin", "clk_ahb";
+		clock-output-names = "clk_out_sd0", "clk_in_sd0";
+		#clock-cells = <1>;
+		clk-phase-sd-hs = <132>, <60>;
+	};
+
 	emmc: sdhci@ec700000 {
 		compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1";
 		reg = <0xec700000 0x300>;
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
index 2f45dd0d04db..d43a0c557a44 100644
--- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-         - socionext,uniphier-sd4hc
+          - socionext,uniphier-sd4hc
       - const: cdns,sd4hc
 
   reg:
diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
new file mode 100644
index 000000000000..e60bfe980ab3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/ingenic,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs MMC Controller DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+        - ingenic,jz4740-mmc
+        - ingenic,jz4725b-mmc
+        - ingenic,jz4760-mmc
+        - ingenic,jz4780-mmc
+        - ingenic,x1000-mmc
+      - items:
+        - const: ingenic,jz4770-mmc
+        - const: ingenic,jz4760-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mmc
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    mmc0: mmc@13450000 {
+      compatible = "ingenic,jz4780-mmc";
+      reg = <0x13450000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <37>;
+
+      clocks = <&cgu JZ4780_CLK_MSC0>;
+      clock-names = "mmc";
+
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cap-sdio-irq;
+      dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
+             <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/jz4740.txt b/Documentation/devicetree/bindings/mmc/jz4740.txt
deleted file mode 100644
index 453d3b9d145d..000000000000
--- a/Documentation/devicetree/bindings/mmc/jz4740.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Ingenic XBurst MMC controllers
-
-This file documents the device tree properties used for the MMC controller in
-Ingenic JZ4740/JZ4760/JZ4780/X1000 SoCs. These are in addition to the core MMC
-properties described in mmc.txt.
-
-Required properties:
-- compatible: Should be one of the following:
-  - "ingenic,jz4740-mmc" for the JZ4740
-  - "ingenic,jz4725b-mmc" for the JZ4725B
-  - "ingenic,jz4760-mmc" for the JZ4760
-  - "ingenic,jz4780-mmc" for the JZ4780
-  - "ingenic,x1000-mmc" for the X1000
-- reg: Should contain the MMC controller registers location and length.
-- interrupts: Should contain the interrupt specifier of the MMC controller.
-- clocks: Clock for the MMC controller.
-
-Optional properties:
-- dmas: List of DMA specifiers with the controller specific format
-        as described in the generic DMA client binding. A tx and rx
-        specifier is required.
-- dma-names: RX and TX  DMA request names.
-        Should be "rx" and "tx", in that order.
-
-For additional details on DMA client bindings see ../dma/dma.txt.
-
-Example:
-
-mmc0: mmc@13450000 {
-	compatible = "ingenic,jz4780-mmc";
-	reg = <0x13450000 0x1000>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <37>;
-
-	clocks = <&cgu JZ4780_CLK_MSC0>;
-	clock-names = "mmc";
-
-	dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>, <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
-	dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
index 89c3edd6a728..4ee3ed6efab4 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -30,21 +30,21 @@ properties:
       - items:
           - enum:
             # for Rockchip PX30
-            - rockchip,px30-dw-mshc
+              - rockchip,px30-dw-mshc
             # for Rockchip RK3036
-            - rockchip,rk3036-dw-mshc
+              - rockchip,rk3036-dw-mshc
             # for Rockchip RK322x
-            - rockchip,rk3228-dw-mshc
+              - rockchip,rk3228-dw-mshc
             # for Rockchip RK3308
-            - rockchip,rk3308-dw-mshc
+              - rockchip,rk3308-dw-mshc
             # for Rockchip RK3328
-            - rockchip,rk3328-dw-mshc
+              - rockchip,rk3328-dw-mshc
             # for Rockchip RK3368
-            - rockchip,rk3368-dw-mshc
+              - rockchip,rk3368-dw-mshc
             # for Rockchip RK3399
-            - rockchip,rk3399-dw-mshc
+              - rockchip,rk3399-dw-mshc
             # for Rockchip RV1108
-            - rockchip,rv1108-dw-mshc
+              - rockchip,rv1108-dw-mshc
           - const: rockchip,rk3288-dw-mshc
 
   reg:
diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
index cdfac9b4411b..8d6413f48823 100644
--- a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
@@ -35,15 +35,15 @@ properties:
     oneOf:
       - const: host
       - items:
-        - const: host
-        - const: bridge
+          - const: host
+          - const: bridge
       - items:
-        - const: host
-        - const: hw
+          - const: host
+          - const: hw
       - items:
-        - const: host
-        - const: bridge
-        - const: hw
+          - const: host
+          - const: bridge
+          - const: hw
 
   resets:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
index 46e6b6726bc0..c07b91592cbd 100644
--- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -54,8 +54,8 @@ properties:
         reg:  register reset
     oneOf:
       - items:
-        - const: nand
-        - const: reg
+          - const: nand
+          - const: reg
       - const: nand
       - const: reg
 
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index db36b4d86484..c7c9ad4e3f9f 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -19,8 +19,8 @@ properties:
       - const: allwinner,sun8i-v3s-emac
       - const: allwinner,sun50i-a64-emac
       - items:
-        - const: allwinner,sun50i-h6-emac
-        - const: allwinner,sun50i-a64-emac
+          - const: allwinner,sun50i-h6-emac
+          - const: allwinner,sun50i-a64-emac
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index cccf8202c8f7..7a784dc4e513 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -9,7 +9,7 @@ title: Bosch MCAN controller Bindings
 description: Bosch MCAN controller for CAN bus
 
 maintainers:
-  -  Sriram Dash <sriram.dash@samsung.com>
+  - Sriram Dash <sriram.dash@samsung.com>
 
 properties:
   compatible:
@@ -51,31 +51,31 @@ properties:
 
   bosch,mram-cfg:
     description: |
-                 Message RAM configuration data.
-                 Multiple M_CAN instances can share the same Message RAM
-                 and each element(e.g Rx FIFO or Tx Buffer and etc) number
-                 in Message RAM is also configurable, so this property is
-                 telling driver how the shared or private Message RAM are
-                 used by this M_CAN controller.
-
-                 The format should be as follows:
-                 <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
-                 The 'offset' is an address offset of the Message RAM where
-                 the following elements start from. This is usually set to
-                 0x0 if you're using a private Message RAM. The remain cells
-                 are used to specify how many elements are used for each FIFO/Buffer.
-
-                 M_CAN includes the following elements according to user manual:
-                 11-bit Filter	0-128 elements / 0-128 words
-                 29-bit Filter	0-64 elements / 0-128 words
-                 Rx FIFO 0	0-64 elements / 0-1152 words
-                 Rx FIFO 1	0-64 elements / 0-1152 words
-                 Rx Buffers	0-64 elements / 0-1152 words
-                 Tx Event FIFO	0-32 elements / 0-64 words
-                 Tx Buffers	0-32 elements / 0-576 words
-
-                 Please refer to 2.4.1 Message RAM Configuration in Bosch
-                 M_CAN user manual for details.
+      Message RAM configuration data.
+      Multiple M_CAN instances can share the same Message RAM
+      and each element(e.g Rx FIFO or Tx Buffer and etc) number
+      in Message RAM is also configurable, so this property is
+      telling driver how the shared or private Message RAM are
+      used by this M_CAN controller.
+
+      The format should be as follows:
+      <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
+      The 'offset' is an address offset of the Message RAM where
+      the following elements start from. This is usually set to
+      0x0 if you're using a private Message RAM. The remain cells
+      are used to specify how many elements are used for each FIFO/Buffer.
+
+      M_CAN includes the following elements according to user manual:
+      11-bit Filter	0-128 elements / 0-128 words
+      29-bit Filter	0-64 elements / 0-128 words
+      Rx FIFO 0	0-64 elements / 0-1152 words
+      Rx FIFO 1	0-64 elements / 0-1152 words
+      Rx Buffers	0-64 elements / 0-1152 words
+      Tx Event FIFO	0-32 elements / 0-64 words
+      Tx Buffers	0-32 elements / 0-576 words
+
+      Please refer to 2.4.1 Message RAM Configuration in Bosch
+      M_CAN user manual for details.
     allOf:
       - $ref: /schemas/types.yaml#/definitions/int32-array
       - items:
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 5aa141ccc113..9b1f1147ca36 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -81,7 +81,8 @@ properties:
     $ref: /schemas/types.yaml#definitions/flag
     description:
       If set, indicates the PHY device does not correctly release
-      the turn around line low at the end of a MDIO transaction.
+      the turn around line low at end of the control phase of the
+      MDIO transaction.
 
   enet-phy-lane-swap:
     $ref: /schemas/types.yaml#definitions/flag
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index ff8b0f211aa1..26c492a2e0e1 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -82,6 +82,7 @@ ethernet@83fec000 {
 	phy-supply = <&reg_fec_supply>;
 	phy-handle = <&ethphy>;
 	mdio {
+	        clock-frequency = <5000000>;
 		ethphy: ethernet-phy@6 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <6>;
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
index 50c3397a82bc..d6a3bf8550eb 100644
--- a/Documentation/devicetree/bindings/net/mdio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@@ -31,13 +31,25 @@ properties:
     maxItems: 1
     description:
       The phandle and specifier for the GPIO that controls the RESET
-      lines of all PHYs on that MDIO bus.
+      lines of all devices on that MDIO bus.
 
   reset-delay-us:
     description:
-      RESET pulse width in microseconds. It applies to all PHY devices
-      and must therefore be appropriately determined based on all PHY
-      requirements (maximum value of all per-PHY RESET pulse widths).
+      RESET pulse width in microseconds. It applies to all MDIO devices
+      and must therefore be appropriately determined based on all devices
+      requirements (maximum value of all per-device RESET pulse widths).
+
+  clock-frequency:
+    description:
+      Desired MDIO bus clock frequency in Hz. Values greater than IEEE 802.3
+      defined 2.5MHz should only be used when all devices on the bus support
+      the given clock speed.
+
+  suppress-preamble:
+    description:
+      The 32 bit preamble should be suppressed. In order for this to
+      work, all devices on the bus must support suppressed preamble.
+    type: boolean
 
 patternProperties:
   "^ethernet-phy@[0-9a-f]+$":
@@ -48,7 +60,35 @@ patternProperties:
         minimum: 0
         maximum: 31
         description:
-          The ID number for the PHY.
+          The ID number for the device.
+
+      broken-turn-around:
+        $ref: /schemas/types.yaml#definitions/flag
+        description:
+          If set, indicates the MDIO device does not correctly release
+          the turn around line low at end of the control phase of the
+          MDIO transaction.
+
+      resets:
+        maxItems: 1
+
+      reset-names:
+        const: phy
+
+      reset-gpios:
+        maxItems: 1
+        description:
+          The GPIO phandle and specifier for the MDIO reset signal.
+
+      reset-assert-us:
+        description:
+          Delay after the reset was asserted in microseconds. If this
+          property is missing the delay will be skipped.
+
+      reset-deassert-us:
+        description:
+          Delay after the reset was deasserted in microseconds. If
+          this property is missing the delay will be skipped.
 
     required:
       - reg
diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
new file mode 100644
index 000000000000..42be0255512b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,tja11xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TJA11xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+  Bindings for NXP TJA11xx automotive PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]+$":
+    type: object
+    description: |
+      Some packages have multiple PHYs. Secondary PHY should be defines as
+      subnode of the first (parent) PHY.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 31
+        description:
+          The ID number for the child PHY. Should be +1 of parent PHY.
+
+    required:
+      - reg
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tja1101_phy0: ethernet-phy@4 {
+            reg = <0x4>;
+        };
+    };
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tja1102_phy0: ethernet-phy@4 {
+            reg = <0x4>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            tja1102_phy1: ethernet-phy@5 {
+                reg = <0x5>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.txt b/Documentation/devicetree/bindings/net/qca,ar71xx.txt
deleted file mode 100644
index 2a33e71ba72b..000000000000
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Required properties:
-- compatible:	Should be "qca,<soc>-eth". Currently support compatibles are:
-		qca,ar7100-eth - Atheros AR7100
-		qca,ar7240-eth - Atheros AR7240
-		qca,ar7241-eth - Atheros AR7241
-		qca,ar7242-eth - Atheros AR7242
-		qca,ar9130-eth - Atheros AR9130
-		qca,ar9330-eth - Atheros AR9330
-		qca,ar9340-eth - Atheros AR9340
-		qca,qca9530-eth - Qualcomm Atheros QCA9530
-		qca,qca9550-eth - Qualcomm Atheros QCA9550
-		qca,qca9560-eth - Qualcomm Atheros QCA9560
-
-- reg : Address and length of the register set for the device
-- interrupts : Should contain eth interrupt
-- phy-mode : See ethernet.txt file in the same directory
-- clocks: the clock used by the core
-- clock-names: the names of the clock listed in the clocks property. These are
-	"eth" and "mdio".
-- resets: Should contain phandles to the reset signals
-- reset-names: Should contain the names of reset signal listed in the resets
-		property. These are "mac" and "mdio"
-
-Optional properties:
-- phy-handle : phandle to the PHY device connected to this device.
-- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
-  Use instead of phy-handle.
-
-Optional subnodes:
-- mdio : specifies the mdio bus, used as a container for phy nodes
-  according to phy.txt in the same directory
-
-Example:
-
-ethernet@1a000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x1a000000 0x200>;
-	interrupts = <5>;
-	resets = <&rst 13>, <&rst 23>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_MDIO>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "gmii";
-};
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
new file mode 100644
index 000000000000..f99a5aabe923
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -0,0 +1,216 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,ar71xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCA AR71XX MAC
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qca,ar7100-eth   # Atheros AR7100
+              - qca,ar7240-eth   # Atheros AR7240
+              - qca,ar7241-eth   # Atheros AR7241
+              - qca,ar7242-eth   # Atheros AR7242
+              - qca,ar9130-eth   # Atheros AR9130
+              - qca,ar9330-eth   # Atheros AR9330
+              - qca,ar9340-eth   # Atheros AR9340
+              - qca,qca9530-eth  # Qualcomm Atheros QCA9530
+              - qca,qca9550-eth  # Qualcomm Atheros QCA9550
+              - qca,qca9560-eth  # Qualcomm Atheros QCA9560
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    description: number of address cells for the MDIO bus
+    const: 1
+
+  '#size-cells':
+    description: number of size cells on the MDIO bus
+    const: 0
+
+  clocks:
+    items:
+      - description: MAC main clock
+      - description: MDIO clock
+
+  clock-names:
+    items:
+      - const: eth
+      - const: mdio
+
+  resets:
+    items:
+      - description: MAC reset
+      - description: MDIO reset
+
+  reset-names:
+    items:
+      - const: mac
+      - const: mdio
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-mode
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  # Lager board
+  - |
+    eth0: ethernet@19000000 {
+        compatible = "qca,ar9330-eth";
+        reg = <0x19000000 0x200>;
+        interrupts = <4>;
+        resets = <&rst 9>, <&rst 22>;
+        reset-names = "mac", "mdio";
+        clocks = <&pll 1>, <&pll 2>;
+        clock-names = "eth", "mdio";
+        qca,ethcfg = <&ethcfg>;
+        phy-mode = "mii";
+        phy-handle = <&phy_port4>;
+    };
+
+    eth1: ethernet@1a000000 {
+        compatible = "qca,ar9330-eth";
+        reg = <0x1a000000 0x200>;
+        interrupts = <5>;
+        resets = <&rst 13>, <&rst 23>;
+        reset-names = "mac", "mdio";
+        clocks = <&pll 1>, <&pll 2>;
+        clock-names = "eth", "mdio";
+
+        phy-mode = "gmii";
+
+        status = "disabled";
+
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            switch10: switch@10 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                compatible = "qca,ar9331-switch";
+                reg = <0x10>;
+                resets = <&rst 8>;
+                reset-names = "switch";
+
+                interrupt-parent = <&miscintc>;
+                interrupts = <12>;
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    switch_port0: port@0 {
+                        reg = <0x0>;
+                        label = "cpu";
+                        ethernet = <&eth1>;
+
+                        phy-mode = "gmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                        };
+                    };
+
+                    switch_port1: port@1 {
+                        reg = <0x1>;
+                        phy-handle = <&phy_port0>;
+                        phy-mode = "internal";
+
+                        status = "disabled";
+                    };
+
+                    switch_port2: port@2 {
+                        reg = <0x2>;
+                        phy-handle = <&phy_port1>;
+                        phy-mode = "internal";
+
+                        status = "disabled";
+                    };
+
+                    switch_port3: port@3 {
+                        reg = <0x3>;
+                        phy-handle = <&phy_port2>;
+                        phy-mode = "internal";
+
+                        status = "disabled";
+                    };
+
+                    switch_port4: port@4 {
+                        reg = <0x4>;
+                        phy-handle = <&phy_port3>;
+                        phy-mode = "internal";
+
+                        status = "disabled";
+                    };
+                };
+
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    interrupt-parent = <&switch10>;
+
+                    phy_port0: phy@0 {
+                        reg = <0x0>;
+                        interrupts = <0>;
+                        status = "disabled";
+                    };
+
+                    phy_port1: phy@1 {
+                        reg = <0x1>;
+                        interrupts = <0>;
+                        status = "disabled";
+                    };
+
+                    phy_port2: phy@2 {
+                        reg = <0x2>;
+                        interrupts = <0>;
+                        status = "disabled";
+                    };
+
+                    phy_port3: phy@3 {
+                        reg = <0x3>;
+                        interrupts = <0>;
+                        status = "disabled";
+                    };
+
+                    phy_port4: phy@4 {
+                        reg = <0x4>;
+                        interrupts = <0>;
+                        status = "disabled";
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
index d2202791c1d4..709ca6d51650 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
@@ -10,9 +10,11 @@ device the slave device is attached to.
 Required properties:
  - compatible: should contain one of the following:
    * "qcom,qca6174-bt"
+   * "qcom,qca9377-bt"
    * "qcom,wcn3990-bt"
    * "qcom,wcn3991-bt"
    * "qcom,wcn3998-bt"
+   * "qcom,qca6390-bt"
 
 Optional properties for compatible string qcom,qca6174-bt:
 
@@ -20,6 +22,10 @@ Optional properties for compatible string qcom,qca6174-bt:
  - clocks: clock provided to the controller (SUSCLK_32KHZ)
  - firmware-name: specify the name of nvm firmware to load
 
+Optional properties for compatible string qcom,qca9377-bt:
+
+ - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
+
 Required properties for compatible string qcom,wcn399x-bt:
 
  - vddio-supply: VDD_IO supply regulator handle.
diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
new file mode 100644
index 000000000000..f15a5e5e4859
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTL8723BS/RTL8723CS/RTL8822CS Bluetooth Device Tree Bindings
+
+maintainers:
+  - Vasily Khoruzhick <anarsoul@gmail.com>
+  - Alistair Francis <alistair@alistair23.me>
+
+description:
+  RTL8723CS/RTL8723CS/RTL8822CS is WiFi + BT chip. WiFi part is connected over
+  SDIO, while BT is connected over serial. It speaks H5 protocol with few
+  extra commands to upload firmware and change module speed.
+
+properties:
+  compatible:
+    oneOf:
+      - const: "realtek,rtl8723bs-bt"
+      - const: "realtek,rtl8723cs-bt"
+      - const: "realtek,rtl8822cs-bt"
+
+  device-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the BT module
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to enable the BT module
+
+  host-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the host processor
+
+required:
+  - compatible
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    uart1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+        uart-has-rtscts = <1>;
+
+        bluetooth {
+            compatible = "realtek,rtl8723bs-bt";
+            device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+            host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
index 7f84df9790e2..2eaa8799e002 100644
--- a/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -40,8 +40,8 @@ properties:
 
   reg:
     items:
-       - description: E-DMAC/feLic registers
-       - description: TSU registers
+      - description: E-DMAC/feLic registers
+      - description: TSU registers
     minItems: 1
 
   interrupts:
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index e08cd4c4d568..439115b7663c 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -27,6 +27,7 @@ select:
           - snps,dwmac-3.710
           - snps,dwmac-4.00
           - snps,dwmac-4.10a
+          - snps,dwmac-4.20a
           - snps,dwxgmac
           - snps,dwxgmac-2.10
 
@@ -62,6 +63,7 @@ properties:
         - snps,dwmac-3.710
         - snps,dwmac-4.00
         - snps,dwmac-4.10a
+        - snps,dwmac-4.20a
         - snps,dwxgmac
         - snps,dwxgmac-2.10
 
@@ -87,7 +89,8 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 3
+    maxItems: 5
+    additionalItems: true
     items:
       - description: GMAC main clock
       - description: Peripheral registers interface clock
@@ -97,6 +100,8 @@ properties:
           clock will be used and this is fine on some platforms.
 
   clock-names:
+    minItems: 1
+    maxItems: 5
     additionalItems: true
     contains:
       enum:
@@ -342,6 +347,7 @@ allOf:
               - allwinner,sun50i-a64-emac
               - snps,dwmac-4.00
               - snps,dwmac-4.10a
+              - snps,dwmac-4.20a
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
deleted file mode 100644
index a90eef11dc46..000000000000
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-STMicroelectronics STM32 / MCU DWMAC glue layer controller
-
-This file documents platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible:  For MCU family should be "st,stm32-dwmac" to select glue, and
-	       "snps,dwmac-3.50a" to select IP version.
-	       For MPU family should be "st,stm32mp1-dwmac" to select
-	       glue, and "snps,dwmac-4.20a" to select IP version.
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: Should be "stmmaceth" for the host clock.
-	       Should be "mac-clk-tx" for the MAC TX clock.
-	       Should be "mac-clk-rx" for the MAC RX clock.
-	       For MPU family need to add also "ethstp" for power mode clock
-- interrupt-names: Should contain a list of interrupt names corresponding to
-           the interrupts in the interrupts property, if available.
-		   Should be "macirq" for the main MAC IRQ
-		   Should be "eth_wake_irq" for the IT which wake up system
-- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
-	       encompases the glue register, and the offset of the control register.
-
-Optional properties:
-- clock-names:     For MPU family "eth-ck" for PHY without quartz
-- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
-- st,eth-ref-clk-sel (boolean) :  set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
-
-Example:
-
-	ethernet@40028000 {
-		compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
-		reg = <0x40028000 0x8000>;
-		reg-names = "stmmaceth";
-		interrupts = <0 61 0>, <0 62 0>;
-		interrupt-names = "macirq", "eth_wake_irq";
-		clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
-		clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
-		st,syscon = <&syscfg 0x4>;
-		snps,pbl = <8>;
-		snps,mixed-burst;
-		dma-ranges;
-	};
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
new file mode 100644
index 000000000000..2207910ee79b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Christophe Roullier <christophe.roullier@st.com>
+
+description:
+  This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32-dwmac
+          - st,stm32mp1-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - st,stm32mp1-dwmac
+          - const: snps,dwmac-4.20a
+      - items:
+          - enum:
+              - st,stm32-dwmac
+          - const: snps,dwmac-4.10a
+      - items:
+          - enum:
+              - st,stm32-dwmac
+          - const: snps,dwmac-3.50a
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+    items:
+        - description: GMAC main clock
+        - description: MAC TX clock
+        - description: MAC RX clock
+        - description: For MPU family, used for power mode
+        - description: For MPU family, used for PHY without quartz
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+    contains:
+      enum:
+        - stmmaceth
+        - mac-clk-tx
+        - mac-clk-rx
+        - ethstp
+        - eth-ck
+
+  st,syscon:
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the glue register, and the offset of the control register
+
+  st,eth-clk-sel:
+    description:
+      set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
+    type: boolean
+
+  st,eth-ref-clk-sel:
+    description:
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK.
+    type: boolean
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - st,syscon
+
+examples:
+ - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    #include <dt-bindings/mfd/stm32h7-rcc.h>
+    //Example 1
+     ethernet0: ethernet@5800a000 {
+           compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+           reg = <0x5800a000 0x2000>;
+           reg-names = "stmmaceth";
+           interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "macirq";
+           clock-names = "stmmaceth",
+                     "mac-clk-tx",
+                     "mac-clk-rx",
+                     "ethstp",
+                     "eth-ck";
+           clocks = <&rcc ETHMAC>,
+                <&rcc ETHTX>,
+                <&rcc ETHRX>,
+                <&rcc ETHSTP>,
+                <&rcc ETHCK_K>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <2>;
+           snps,axi-config = <&stmmac_axi_config_0>;
+           snps,tso;
+           phy-mode = "rgmii";
+       };
+
+    //Example 2 (MCU example)
+     ethernet1: ethernet@40028000 {
+           compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+           reg = <0x40028000 0x8000>;
+           reg-names = "stmmaceth";
+           interrupts = <0 61 0>, <0 62 0>;
+           interrupt-names = "macirq", "eth_wake_irq";
+           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+           clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <8>;
+           snps,mixed-burst;
+           phy-mode = "mii";
+       };
+
+    //Example 3
+     ethernet2: ethernet@40027000 {
+           compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+           reg = <0x40028000 0x8000>;
+           reg-names = "stmmaceth";
+           interrupts = <61>;
+           interrupt-names = "macirq";
+           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+           clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <8>;
+           phy-mode = "mii";
+       };
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 976f139bb66e..8fc8d3be303b 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -23,14 +23,14 @@ properties:
     oneOf:
       - const: ti,cpsw-switch
       - items:
-         - const: ti,am335x-cpsw-switch
-         - const: ti,cpsw-switch
+          - const: ti,am335x-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,am4372-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,am4372-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,dra7-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,dra7-cpsw-switch
+          - const: ti,cpsw-switch
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index 242ac4935a4b..2ea14ab29254 100644
--- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -18,25 +18,24 @@ allOf:
 properties:
   compatible:
     oneOf:
-       - const: ti,davinci_mdio
-       - items:
-         - const: ti,keystone_mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,am4372-mdio
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
+      - const: ti,davinci_mdio
+      - items:
+          - const: ti,keystone_mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,am4372-mdio
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
 
   reg:
     maxItems: 1
 
   bus_freq:
-      maximum: 2500000
-      description:
-        MDIO Bus frequency
+    maximum: 2500000
+    description: MDIO Bus frequency
 
   ti,hwmods:
     description: TI hwmod name
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
deleted file mode 100644
index 265bdb7dc8aa..000000000000
--- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-= Rockchip eFuse device tree bindings =
-
-Required properties:
-- compatible: Should be one of the following.
-  - "rockchip,rk3066a-efuse" - for RK3066a SoCs.
-  - "rockchip,rk3188-efuse" - for RK3188 SoCs.
-  - "rockchip,rk3228-efuse" - for RK3228 SoCs.
-  - "rockchip,rk3288-efuse" - for RK3288 SoCs.
-  - "rockchip,rk3328-efuse" - for RK3328 SoCs.
-  - "rockchip,rk3368-efuse" - for RK3368 SoCs.
-  - "rockchip,rk3399-efuse" - for RK3399 SoCs.
-- reg: Should contain the registers location and exact eFuse size
-- clocks: Should be the clock id of eFuse
-- clock-names: Should be "pclk_efuse"
-
-Optional properties:
-- rockchip,efuse-size: Should be exact eFuse size in byte, the eFuse
-  size in property <reg> will be invalid if define this property.
-
-Deprecated properties:
-- compatible: "rockchip,rockchip-efuse"
-  Old efuse compatible value compatible to rk3066a, rk3188 and rk3288
-  efuses
-
-= Data cells =
-Are child nodes of eFuse, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	efuse: efuse@ffb40000 {
-		compatible = "rockchip,rk3288-efuse";
-		reg = <0xffb40000 0x20>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		clocks = <&cru PCLK_EFUSE256>;
-		clock-names = "pclk_efuse";
-
-		/* Data cells */
-		cpu_leakage: cpu_leakage {
-			reg = <0x17 0x1>;
-		};
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-Example:
-
-	cpu_leakage {
-		...
-		nvmem-cells = <&cpu_leakage>;
-		nvmem-cell-names = "cpu_leakage";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
new file mode 100644
index 000000000000..3ae00b0b23bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rockchip-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip eFuse device tree bindings
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-efuse
+      - rockchip,rk3188-efuse
+      - rockchip,rk3228-efuse
+      - rockchip,rk3288-efuse
+      - rockchip,rk3328-efuse
+      - rockchip,rk3368-efuse
+      - rockchip,rk3399-efuse
+
+      # Deprecated: old compatible value for rk3066a, rk3188 and rk3288
+      - rockchip,rockchip-efuse
+
+  reg:
+    description:
+      Registers location and eFuse size.
+    maxItems: 1
+
+  clocks:
+    description:
+      eFuse clock id.
+    maxItems: 1
+
+  clock-names:
+    const: pclk_efuse
+
+  rockchip,efuse-size:
+    description:
+      eFuse size in bytes. The eFuse size in property <reg> will be invalid if
+      this property is defined.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    efuse: efuse@ffb40000 {
+            compatible = "rockchip,rk3288-efuse";
+            reg = <0xffb40000 0x20>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            clocks = <&cru PCLK_EFUSE256>;
+            clock-names = "pclk_efuse";
+
+            /* Data cells */
+            cpu_leakage: cpu_leakage@17 {
+                    reg = <0x17 0x1>;
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 9a346d6290d9..77bb5309918e 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -23,7 +23,7 @@ description: |+
 
 properties:
   compatible:
-      const: intel,lgm-emmc-phy
+    const: intel,lgm-emmc-phy
 
   "#phy-cells":
     const: 0
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 54d6f8d43508..5ff9e7ab6001 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -19,6 +19,7 @@ Required properties:
 	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
 	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845,
 	       "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150.
+	       "qcom,sm8250-qmp-ufs-phy" for UFS QMP phy on sm8250.
 
 - reg:
   - index 0: address and length of register set for PHY's common
@@ -69,6 +70,8 @@ Required properties:
 			"ref", "ref_aux".
 		For "qcom,sm8150-qmp-ufs-phy" must contain:
 			"ref", "ref_aux".
+		For "qcom,sm8250-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
@@ -103,6 +106,8 @@ Required properties:
 			"ufsphy".
 		For "qcom,sm8150-qmp-ufs-phy": must contain:
 			"ufsphy".
+		For "qcom,sm8250-qmp-ufs-phy": must contain:
+			"ufsphy".
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
new file mode 100644
index 000000000000..6dc3b52f47cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8250 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SM8250 platform.
+
+properties:
+  compatible:
+    const: qcom,sm8250-pinctrl
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: "west"
+      - const: "south"
+      - const: "north"
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        pins:
+          description:
+            List of gpio pins affected by the properties specified in this
+            subnode.
+          items:
+            oneOf:
+              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+          minItems: 1
+          maxItems: 36
+
+        function:
+          description:
+            Specify the alternative function to be configured for the specified
+            pins.
+
+          enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+            cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+            cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+            ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+            ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+            mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+            mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+            mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+            pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+            pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+            qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+            qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+            qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+            sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+            tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+            tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+            tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+
+        bias-pull-down: true
+
+        bias-pull-up: true
+
+        bias-disable: true
+
+        output-high: true
+
+        output-low: true
+
+      required:
+        - pins
+        - function
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@1f00000 {
+                compatible = "qcom,sm8250-pinctrl";
+                reg = <0x0f100000 0x300000>,
+                      <0x0f500000 0x300000>,
+                      <0x0f900000 0x300000>;
+                reg-names = "west", "south", "north";
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 180>;
+                wakeup-parent = <&pdc>;
+        };
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index ba605310abeb..8058955fb3b9 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -23,6 +23,7 @@ properties:
       - qcom,sc7180-rpmhpd
       - qcom,sdm845-rpmhpd
       - qcom,sm8150-rpmhpd
+      - qcom,sm8250-rpmhpd
 
   '#power-domain-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
index e59331e1d944..55b6ab2d8784 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -17,6 +17,7 @@ description:
 properties:
   compatible:
     enum:
+      - renesas,r8a7742-sysc  # RZ/G1H
       - renesas,r8a7743-sysc  # RZ/G1M
       - renesas,r8a7744-sysc  # RZ/G1N
       - renesas,r8a7745-sysc  # RZ/G1E
diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
index ea7f32905172..4fe64f4dd594 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
@@ -49,17 +49,17 @@ properties:
       are available.
     oneOf:
       - items:
-        - const: timers
+          - const: timers
       - items:
-        - const: timers
-        - const: pwm-tclk0
+          - const: timers
+          - const: pwm-tclk0
       - items:
-        - const: timers
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk1
       - items:
-        - const: timers
-        - const: pwm-tclk0
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk0
+          - const: pwm-tclk1
 
   interrupts:
     description:
diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
index 945c14e1be35..620a2ff40fc7 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
+++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
@@ -27,6 +27,7 @@ properties:
           - renesas,pwm-r8a7794   # R-Car E2
           - renesas,pwm-r8a7795   # R-Car H3
           - renesas,pwm-r8a7796   # R-Car M3-W
+          - renesas,pwm-r8a77961  # R-Car M3-W+
           - renesas,pwm-r8a77965  # R-Car M3-N
           - renesas,pwm-r8a77970  # R-Car V3M
           - renesas,pwm-r8a77980  # R-Car V3H
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
new file mode 100644
index 000000000000..19cbd5eb2897
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77826 PMIC
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - maxim,max77826
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST
+
+    patternProperties:
+      "^LDO([1-9]|1[0-5])$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+      "^BUCK|BUCKBOOST$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+            compatible = "maxim,max77826";
+            reg = <0x69>;
+
+            regulators {
+                LDO2 {
+                    regulator-min-microvolt = <650000>;
+                    regulator-max-microvolt = <3587500>;
+                };
+            };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index c0d83865e933..4ff4d3df0a06 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -25,7 +25,7 @@ properties:
     maxItems: 3
 
   resets:
-     maxItems: 1
+    maxItems: 1
 
   st,syscfg-holdboot:
     allOf:
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
index bac4afa3b197..4dd20de6977f 100644
--- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
@@ -77,6 +77,8 @@ Regions in the /reserved-memory node may be referenced by other device
 nodes by adding a memory-region property to the device node.
 
 memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
+memory-region-names (optional) - a list of names, one for each corresponding
+  entry in the memory-region property
 
 Example
 -------
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
index 512a33bdb208..dfce6738b033 100644
--- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: BCM7216 RESCAL reset controller
 
-description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216.
+description: This document describes the BCM7216 RESCAL reset controller
+  which is responsible for controlling the reset of the SATA and PCIe0/1
+  instances on BCM7216.
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
index c2489e41a801..e10502d9153e 100644
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
@@ -9,6 +9,8 @@ Required properties:
 	- For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
 	- For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
 	- For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"
+	- For i.MX8MN SoCs should be "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"
+	- For i.MX8MP SoCs should be "fsl,imx8mp-src", "syscon"
 - reg: should be register base and length as documented in the
   datasheet
 - interrupts: Should contain SRC interrupt
@@ -49,4 +51,6 @@ Example:
 For list of all valid reset indices see
 <dt-bindings/reset/imx7-reset.h> for i.MX7,
 <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM
+<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and
+<dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and
+<dt-bindings/reset/imx8mp-reset.h> for i.MX8MP
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
index b5de1d196a13..4c2b429ac702 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -23,6 +23,7 @@ description: |
 properties:
   compatible:
     enum:
+      - renesas,r8a7742-rst       # RZ/G1H
       - renesas,r8a7743-rst       # RZ/G1M
       - renesas,r8a7744-rst       # RZ/G1N
       - renesas,r8a7745-rst       # RZ/G1E
diff --git a/Documentation/devicetree/bindings/rng/arm-cctrng.yaml b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml
new file mode 100644
index 000000000000..ca6aad19b6ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/arm-cctrng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm TrustZone CryptoCell TRNG engine
+
+maintainers:
+  - Hadar Gat <hadar.gat@arm.com>
+
+description: |+
+  Arm TrustZone CryptoCell TRNG (True Random Number Generator) engine.
+
+properties:
+  compatible:
+    enum:
+      - arm,cryptocell-713-trng
+      - arm,cryptocell-703-trng
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  arm,rosc-ratio:
+    description:
+      Arm TrustZone CryptoCell TRNG engine has 4 ring oscillators.
+      Sampling ratio values for these 4 ring oscillators. (from calibration)
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - items:
+          maxItems: 4
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - arm,rosc-ratio
+
+additionalProperties: false
+
+examples:
+  - |
+    arm_cctrng: rng@60000000 {
+        compatible = "arm,cryptocell-713-trng";
+        interrupts = <0 29 4>;
+        reg = <0x60000000 0x10000>;
+        arm,rosc-ratio = <5000 1000 500 0>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
index 48c6cafca90c..57b087574aa1 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
@@ -38,10 +38,10 @@ properties:
           minItems: 3
           maxItems: 3
     description: |
-       Phandle/offset/mask triplet. The phandle to pwrcfg used to
-       access control register at offset, and change the dbp (Disable Backup
-       Protection) bit represented by the mask, mandatory to disable/enable backup
-       domain (RTC registers) write protection.
+      Phandle/offset/mask triplet. The phandle to pwrcfg used to
+      access control register at offset, and change the dbp (Disable Backup
+      Protection) bit represented by the mask, mandatory to disable/enable backup
+      domain (RTC registers) write protection.
 
   assigned-clocks:
     description: |
@@ -78,14 +78,14 @@ allOf:
             const: st,stm32h7-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-       required:
-         - clock-names
-         - st,syscfg
+      required:
+        - clock-names
+        - st,syscfg
 
   - if:
       properties:
@@ -94,16 +94,16 @@ allOf:
             const: st,stm32mp1-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-         assigned-clocks: false
-         assigned-clock-parents: false
+        assigned-clocks: false
+        assigned-clock-parents: false
 
-       required:
-         - clock-names
+      required:
+        - clock-names
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index d4178ab0d675..75ebc9952a99 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -24,18 +24,18 @@ properties:
     oneOf:
       - description: Always-on power domain UART controller
         items:
-        - enum:
+          - enum:
+              - amlogic,meson6-uart
+              - amlogic,meson8-uart
+              - amlogic,meson8b-uart
+              - amlogic,meson-gx-uart
+          - const: amlogic,meson-ao-uart
+      - description: Everything-Else power domain UART controller
+        enum:
           - amlogic,meson6-uart
           - amlogic,meson8-uart
           - amlogic,meson8b-uart
           - amlogic,meson-gx-uart
-        - const: amlogic,meson-ao-uart
-      - description: Everything-Else power domain UART controller
-        enum:
-        - amlogic,meson6-uart
-        - amlogic,meson8-uart
-        - amlogic,meson8b-uart
-        - amlogic,meson-gx-uart
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index d4beaf11222d..2b8261ea6d9c 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -6,13 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: RS485 serial communications Bindings
 
-description: The RTS signal is capable of automatically controlling
-             line direction for the built-in half-duplex mode.
-             The properties described hereafter shall be given to a
-             half-duplex capable UART node.
+description: The RTS signal is capable of automatically controlling line
+  direction for the built-in half-duplex mode. The properties described
+  hereafter shall be given to a half-duplex capable UART node.
 
 maintainers:
-  -  Rob Herring <robh@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 properties:
   rs485-rts-delay:
@@ -37,9 +36,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/flag
 
   linux,rs485-enabled-at-boot-time:
-    description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
+    description: enables the rs485 feature at boot time. It can be disabled
+      later with proper ioctl.
     $ref: /schemas/types.yaml#/definitions/flag
 
   rs485-rx-during-tx:
-   description: enables the receiving of data even while sending data.
-   $ref: /schemas/types.yaml#/definitions/flag
+    description: enables the receiving of data even while sending data.
+    $ref: /schemas/types.yaml#/definitions/flag
+...
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
index cb008fd188d8..02b2d5ba01d6 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
@@ -26,11 +26,11 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,meson8-canvas
-          - amlogic,meson8b-canvas
-          - amlogic,meson8m2-canvas
-        - const: amlogic,canvas
+          - enum:
+              - amlogic,meson8-canvas
+              - amlogic,meson8b-canvas
+              - amlogic,meson8m2-canvas
+          - const: amlogic,canvas
       - const: amlogic,canvas # GXBB and newer SoCs
 
   reg:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
index f8fa71f5d84b..2e2f6dc351c0 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -65,30 +65,30 @@ which uses apr as communication between Apps and QDSP.
 		compatible = "qcom,apr-v2";
 		qcom,apr-domain = <APR_DOMAIN_ADSP>;
 
-		q6core@3 {
+		apr-service@3 {
 			compatible = "qcom,q6core";
 			reg = <APR_SVC_ADSP_CORE>;
 		};
 
-		q6afe@4 {
+		apr-service@4 {
 			compatible = "qcom,q6afe";
 			reg = <APR_SVC_AFE>;
 
 			dais {
 				#sound-dai-cells = <1>;
-				hdmi@1 {
-					reg = <1>;
+				dai@1 {
+					reg = <HDMI_RX>;
 				};
 			};
 		};
 
-		q6asm@7 {
+		apr-service@7 {
 			compatible = "qcom,q6asm";
 			reg = <APR_SVC_ASM>;
 			...
 		};
 
-		q6adm@8 {
+		apr-service@8 {
 			compatible = "qcom,q6adm";
 			reg = <APR_SVC_ADM>;
 			...
@@ -106,26 +106,26 @@ have no such dependency.
 		qcom,glink-channels = "apr_audio_svc";
 		qcom,apr-domain = <APR_DOMAIN_ADSP>;
 
-		q6core {
+		apr-service@3 {
 			compatible = "qcom,q6core";
 			reg = <APR_SVC_ADSP_CORE>;
 		};
 
-		q6afe: q6afe {
+		q6afe: apr-service@4 {
 			compatible = "qcom,q6afe";
 			reg = <APR_SVC_AFE>;
 			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
 			...
 		};
 
-		q6asm: q6asm {
+		q6asm: apr-service@7 {
 			compatible = "qcom,q6asm";
 			reg = <APR_SVC_ASM>;
 			qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
 			...
 		};
 
-		q6adm: q6adm {
+		q6adm: apr-service@8 {
 			compatible = "qcom,q6adm";
 			reg = <APR_SVC_ADM>;
 			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
index cb9a25165503..998b4c8a7f78 100644
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -51,6 +51,10 @@ Optional properties:
 			  will be in use as default. Otherwise, the big endian
 			  mode will be in use for all the device registers.
 
+   - fsl,asrc-format	: Defines a mutual sample format used by DPCM Back
+			  Ends, which can replace the fsl,asrc-width.
+			  The value is 2 (S16_LE), or 6 (S24_LE).
+
 Example:
 
 asrc: asrc@2034000 {
diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
new file mode 100644
index 000000000000..73cdcf053a9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  $nodename:
+    pattern: "^easrc@.*"
+
+  compatible:
+    const: fsl,imx8mn-easrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: mem
+
+  dmas:
+    maxItems: 8
+
+  dma-names:
+    items:
+      - const: ctx0_rx
+      - const: ctx0_tx
+      - const: ctx1_rx
+      - const: ctx1_tx
+      - const: ctx2_rx
+      - const: ctx2_tx
+      - const: ctx3_rx
+      - const: ctx3_tx
+
+  firmware-name:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/string
+      - const: imx/easrc/easrc-imx8mn.bin
+    description: The coefficient table for the filters
+
+  fsl,asrc-rate:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 8000
+      - maximum: 192000
+    description: Defines a mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-format:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [2, 6, 10, 32, 36]
+        default: 2
+    description:
+      Defines a mutual sample format used by DPCM Back Ends
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - firmware-name
+  - fsl,asrc-rate
+  - fsl,asrc-format
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+
+    easrc: easrc@300c0000 {
+           compatible = "fsl,imx8mn-easrc";
+           reg = <0x0 0x300c0000 0x0 0x10000>;
+           interrupts = <0x0 122 0x4>;
+           clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+           clock-names = "mem";
+           dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+                  <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+                  <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+                  <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+           dma-names = "ctx0_rx", "ctx0_tx",
+                       "ctx1_rx", "ctx1_tx",
+                       "ctx2_rx", "ctx2_tx",
+                       "ctx3_rx", "ctx3_tx";
+           firmware-name = "imx/easrc/easrc-imx8mn.bin";
+           fsl,asrc-rate  = <8000>;
+           fsl,asrc-format = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt
index d16d96839bcb..388a7bc60b1f 100644
--- a/Documentation/devicetree/bindings/sound/nau8825.txt
+++ b/Documentation/devicetree/bindings/sound/nau8825.txt
@@ -101,5 +101,5 @@ Example:
       nuvoton,crosstalk-enable;
 
       clock-names = "mclk";
-      clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+      clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
   };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index a8f2b0c56c79..bbd581a8c5bc 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -29,6 +29,7 @@ Optional properties:
 - nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
 - nvidia,int-mic-en-gpios : The GPIO that enables the internal microphone
 - nvidia,ext-mic-en-gpios : The GPIO that enables the external microphone
+- nvidia,headset : The Mic Jack represents state of the headset microphone pin
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
index bbae426cdfb1..15c353a20de8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
@@ -29,7 +29,7 @@ used by the apr service device.
 	Definition: Must be 0
 
 = EXAMPLE
-q6adm@8 {
+apr-service@8 {
 	compatible = "qcom,q6adm";
 	reg = <APR_SVC_ADM>;
 	q6routing: routing {
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index d74888b9f1bb..4916dd6a0896 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties.
 
 = EXAMPLE
 
-q6afe@4 {
+apr-service@4 {
 	compatible = "qcom,q6afe";
 	reg = <APR_SVC_AFE>;
 
@@ -110,12 +110,12 @@ q6afe@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		hdmi@1 {
-			reg = <1>;
+		dai@1 {
+			reg = <HDMI_RX>;
 		};
 
-		tdm@24 {
-			reg = <24>;
+		dai@24 {
+			reg = <PRIMARY_TDM_RX_0>;
 			qcom,tdm-sync-mode = <1>:
 			qcom,tdm-sync-src = <1>;
 			qcom,tdm-data-out = <0>;
@@ -125,8 +125,8 @@ q6afe@4 {
 
 		};
 
-		tdm@25 {
-			reg = <25>;
+		dai@25 {
+			reg = <PRIMARY_TDM_TX_0>;
 			qcom,tdm-sync-mode = <1>:
 			qcom,tdm-sync-src = <1>;
 			qcom,tdm-data-out = <0>;
@@ -135,43 +135,43 @@ q6afe@4 {
 			qcom,tdm-data-align = <0>;
 		};
 
-		prim-mi2s-rx@16 {
-			reg = <16>;
+		dai@16 {
+			reg = <PRIMARY_MI2S_RX>;
 			qcom,sd-lines = <0 2>;
 		};
 
-		prim-mi2s-tx@17 {
-			reg = <17>;
+		dai@17 {
+			reg = <PRIMARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 
-		sec-mi2s-rx@18 {
-			reg = <18>;
+		dai@18 {
+			reg = <SECONDARY_MI2S_RX>;
 			qcom,sd-lines = <0 3>;
 		};
 
-		sec-mi2s-tx@19 {
-			reg = <19>;
+		dai@19 {
+			reg = <SECONDARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 
-		tert-mi2s-rx@20 {
-			reg = <20>;
+		dai@20 {
+			reg = <TERTIARY_MI2S_RX>;
 			qcom,sd-lines = <1 3>;
 		};
 
-		tert-mi2s-tx@21 {
-			reg = <21>;
+		dai@21 {
+			reg = <TERTIARY_MI2S_TX>;
 			qcom,sd-lines = <0>;
 		};
 
-		quat-mi2s-rx@22 {
-			reg = <22>;
+		dai@22 {
+			reg = <QUATERNARY_MI2S_RX>;
 			qcom,sd-lines = <0>;
 		};
 
-		quat-mi2s-tx@23 {
-			reg = <23>;
+		dai@23 {
+			reg = <QUATERNARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
index 9f5378c51686..6b9a88d0ea3f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
@@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties.
 
 = EXAMPLE
 
-q6asm@7 {
+apr-service@7 {
 	compatible = "qcom,q6asm";
 	reg = <APR_SVC_ASM>;
 	q6asmdai: dais {
 		compatible = "qcom,q6asm-dais";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		#sound-dai-cells = <1>;
-		mm@0 {
+
+		dai@0 {
 			reg = <0>;
 			direction = <2>;
 			is-compress-dai;
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
index 7f36ff8bec18..5cd4cc9b1fde 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
@@ -15,7 +15,7 @@ used by the apr service device.
 		   example "qcom,q6core-v2.0"
 
 = EXAMPLE
-q6core@3 {
+apr-service@3 {
 	compatible = "qcom,q6core";
 	reg = <APR_SVC_ADSP_CORE>;
 };
diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
index d1b65554e681..91cf4176abd5 100644
--- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
@@ -17,16 +17,16 @@ properties:
     oneOf:
       # for FSI2 SoC
       - items:
-        - enum:
-          - renesas,fsi2-sh73a0
-          - renesas,fsi2-r8a7740
-        - enum:
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,fsi2-sh73a0
+              - renesas,fsi2-r8a7740
+          - enum:
+              - renesas,sh_fsi2
       # for Generic
       - items:
-        - enum:
-          - renesas,sh_fsi
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,sh_fsi
+              - renesas,sh_fsi2
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
deleted file mode 100644
index 79954cd6e37b..000000000000
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ /dev/null
@@ -1,351 +0,0 @@
-Simple-Card:
-
-Simple-Card specifies audio DAI connections of SoC <-> codec.
-
-Required properties:
-
-- compatible				: "simple-audio-card"
-
-Optional properties:
-
-- simple-audio-card,name		: User specified audio sound card name, one string
-					  property.
-- simple-audio-card,widgets		: Please refer to widgets.txt.
-- simple-audio-card,routing		: A list of the connections between audio components.
-					  Each entry is a pair of strings, the first being the
-					  connection's sink, the second being the connection's
-					  source.
-- simple-audio-card,mclk-fs             : Multiplication factor between stream rate and codec
-					  mclk. When defined, mclk-fs property defined in
-					  dai-link sub nodes are ignored.
-- simple-audio-card,hp-det-gpio		: Reference to GPIO that signals when
-					  headphones are attached.
-- simple-audio-card,mic-det-gpio	: Reference to GPIO that signals when
-					  a microphone is attached.
-- simple-audio-card,aux-devs		: List of phandles pointing to auxiliary devices, such
-					  as amplifiers, to be added to the sound card.
-- simple-audio-card,pin-switches	: List of strings containing the widget names for
-					  which pin switches must be created.
-
-Optional subnodes:
-
-- simple-audio-card,dai-link		: Container for dai-link level
-					  properties and the CPU and CODEC
-					  sub-nodes. This container may be
-					  omitted when the card has only one
-					  DAI link. See the examples and the
-					  section below.
-
-Dai-link subnode properties and subnodes:
-
-If dai-link subnode is omitted and the subnode properties are directly
-under "sound"-node the subnode property and subnode names have to be
-prefixed with "simple-audio-card,"-prefix.
-
-Required dai-link subnodes:
-
-- cpu					: CPU   sub-node
-- codec					: CODEC sub-node
-
-Optional dai-link subnode properties:
-
-- format				: CPU/CODEC common audio format.
-					  "i2s", "right_j", "left_j" , "dsp_a"
-					  "dsp_b", "ac97", "pdm", "msb", "lsb"
-- frame-master				: Indicates dai-link frame master.
-					  phandle to a cpu or codec subnode.
-- bitclock-master			: Indicates dai-link bit clock master.
-					  phandle to a cpu or codec subnode.
-- bitclock-inversion			: bool property. Add this if the
-					  dai-link uses bit clock inversion.
-- frame-inversion			: bool property. Add this if the
-					  dai-link uses frame clock inversion.
-- mclk-fs             			: Multiplication factor between stream
-					  rate and codec mclk, applied only for
-					  the dai-link.
-
-For backward compatibility the frame-master and bitclock-master
-properties can be used as booleans in codec subnode to indicate if the
-codec is the dai-link frame or bit clock master. In this case there
-should be no dai-link node, the same properties should not be present
-at sound-node level, and the bitclock-inversion and frame-inversion
-properties should also be placed in the codec node if needed.
-
-Required CPU/CODEC subnodes properties:
-
-- sound-dai				: phandle and port of CPU/CODEC
-
-Optional CPU/CODEC subnodes properties:
-
-- dai-tdm-slot-num			: Please refer to tdm-slot.txt.
-- dai-tdm-slot-width			: Please refer to tdm-slot.txt.
-- clocks / system-clock-frequency	: specify subnode's clock if needed.
-					  it can be specified via "clocks" if system has
-					  clock node (= common clock), or "system-clock-frequency"
-					  (if system doens't support common clock)
-					  If a clock is specified, it is
-					  enabled with clk_prepare_enable()
-					  in dai startup() and disabled with
-					  clk_disable_unprepare() in dai
-					  shutdown().
-					  If a clock is specified and a
-					  multiplication factor is given with
-					  mclk-fs, the clock will be set to the
-					  calculated mclk frequency when the
-					  stream starts.
-- system-clock-direction-out		: specifies clock direction as 'out' on
-					  initialization. It is useful for some aCPUs with
-					  fixed clocks.
-
--------------------------------------------
-Example 1 - single DAI link:
--------------------------------------------
-
-sound {
-	compatible = "simple-audio-card";
-	simple-audio-card,name = "VF610-Tower-Sound-Card";
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&dailink0_master>;
-	simple-audio-card,frame-master = <&dailink0_master>;
-	simple-audio-card,widgets =
-		"Microphone", "Microphone Jack",
-		"Headphone", "Headphone Jack",
-		"Speaker", "External Speaker";
-	simple-audio-card,routing =
-		"MIC_IN", "Microphone Jack",
-		"Headphone Jack", "HP_OUT",
-		"External Speaker", "LINE_OUT";
-
-	simple-audio-card,cpu {
-		sound-dai = <&sh_fsi2 0>;
-	};
-
-	dailink0_master: simple-audio-card,codec {
-		sound-dai = <&ak4648>;
-		clocks = <&osc>;
-	};
-};
-
-&i2c0 {
-	ak4648: ak4648@12 {
-		#sound-dai-cells = <0>;
-		compatible = "asahi-kasei,ak4648";
-		reg = <0x12>;
-	};
-};
-
-sh_fsi2: sh_fsi2@ec230000 {
-	#sound-dai-cells = <1>;
-	compatible = "renesas,sh_fsi2";
-	reg = <0xec230000 0x400>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 146 0x4>;
-};
-
--------------------------------------------
-Example 2 - many DAI links:
--------------------------------------------
-
-sound {
-	compatible = "simple-audio-card";
-	simple-audio-card,name = "Cubox Audio";
-
-	simple-audio-card,dai-link@0 {		/* I2S - HDMI */
-		reg = <0>;
-		format = "i2s";
-		cpu {
-			sound-dai = <&audio1 0>;
-		};
-		codec {
-			sound-dai = <&tda998x 0>;
-		};
-	};
-
-	simple-audio-card,dai-link@1 {		/* S/PDIF - HDMI */
-		reg = <1>;
-		cpu {
-			sound-dai = <&audio1 1>;
-		};
-		codec {
-			sound-dai = <&tda998x 1>;
-		};
-	};
-
-	simple-audio-card,dai-link@2 {		/* S/PDIF - S/PDIF */
-		reg = <2>;
-		cpu {
-			sound-dai = <&audio1 1>;
-		};
-		codec {
-			sound-dai = <&spdif_codec>;
-		};
-	};
-};
-
--------------------------------------------
-Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec
-through TPA6130A2 amplifier to headphones:
--------------------------------------------
-
-&i2c0 {
-	codec: tlv320dac3100@18 {
-		compatible = "ti,tlv320dac3100";
-		...
-	}
-
-	amp: tpa6130a2@60 {
-		compatible = "ti,tpa6130a2";
-		...
-	}
-}
-
-sound {
-	compatible = "simple-audio-card";
-	...
-	simple-audio-card,widgets =
-		"Headphone", "Headphone Jack";
-	simple-audio-card,routing =
-		"Headphone Jack", "HPLEFT",
-		"Headphone Jack", "HPRIGHT",
-		"LEFTIN", "HPL",
-		"RIGHTIN", "HPR";
-	simple-audio-card,aux-devs = <&amp>;
-	simple-audio-card,cpu {
-		sound-dai = <&ssi2>;
-	};
-	simple-audio-card,codec {
-		sound-dai = <&codec>;
-		clocks = ...
-	};
-};
-
--------------------------------------------
-Example 4. Sampling Rate Conversion
--------------------------------------------
-
-sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,name = "rsnd-ak4643";
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&sndcodec>;
-	simple-audio-card,frame-master = <&sndcodec>;
-
-	simple-audio-card,convert-rate = <48000>;
-
-	simple-audio-card,prefix = "ak4642";
-	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
-			"DAI0 Capture", "ak4642 Capture";
-
-	sndcpu: simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-	};
-
-	sndcodec: simple-audio-card,codec {
-		sound-dai = <&ak4643>;
-		system-clock-frequency = <11289600>;
-	};
-};
-
--------------------------------------------
-Example 5. 2 CPU 1 Codec (Mixing)
--------------------------------------------
-sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,name = "rsnd-ak4643";
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&dpcmcpu>;
-	simple-audio-card,frame-master = <&dpcmcpu>;
-
-	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
-			"ak4642 Playback", "DAI1 Playback";
-
-	dpcmcpu: cpu@0 {
-		sound-dai = <&rcar_sound 0>;
-	};
-
-	cpu@1 {
-		sound-dai = <&rcar_sound 1>;
-	};
-
-	codec {
-		prefix = "ak4642";
-		sound-dai = <&ak4643>;
-		clocks = <&audio_clock>;
-	};
-};
-
--------------------------------------------
-Example 6 - many DAI links with DPCM:
--------------------------------------------
-
-CPU0 ------ ak4613
-CPU1 ------ PCM3168A-p  /* DPCM 1ch/2ch */
-CPU2 --/                /* DPCM 3ch/4ch */
-CPU3 --/                /* DPCM 5ch/6ch */
-CPU4 --/                /* DPCM 7ch/8ch */
-CPU5 ------ PCM3168A-c
-
-sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,routing =
-		  "pcm3168a Playback", "DAI1 Playback",
-		  "pcm3168a Playback", "DAI2 Playback",
-		  "pcm3168a Playback", "DAI3 Playback",
-		  "pcm3168a Playback", "DAI4 Playback";
-
-	simple-audio-card,dai-link@0 {
-		format = "left_j";
-		bitclock-master = <&sndcpu0>;
-		frame-master = <&sndcpu0>;
-
-		sndcpu0: cpu {
-			sound-dai = <&rcar_sound 0>;
-		};
-		codec {
-			sound-dai = <&ak4613>;
-		};
-	};
-	simple-audio-card,dai-link@1 {
-		format = "i2s";
-		bitclock-master = <&sndcpu1>;
-		frame-master = <&sndcpu1>;
-
-		convert-channels = <8>; /* TDM Split */
-
-		sndcpu1: cpu@0 {
-			sound-dai = <&rcar_sound 1>;
-		};
-		cpu@1 {
-			sound-dai = <&rcar_sound 2>;
-		};
-		cpu@2 {
-			sound-dai = <&rcar_sound 3>;
-		};
-		cpu@3 {
-			sound-dai = <&rcar_sound 4>;
-		};
-		codec {
-			mclk-fs = <512>;
-			prefix = "pcm3168a";
-			dai-tdm-slot-num = <8>;
-			sound-dai = <&pcm3168a 0>;
-		};
-	};
-	simple-audio-card,dai-link@2 {
-		format = "i2s";
-		bitclock-master = <&sndcpu2>;
-		frame-master = <&sndcpu2>;
-
-		sndcpu2: cpu {
-			sound-dai = <&rcar_sound 5>;
-		};
-		codec {
-			mclk-fs = <512>;
-			prefix = "pcm3168a";
-			sound-dai = <&pcm3168a 1>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
new file mode 100644
index 000000000000..cb2bb5fac0e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -0,0 +1,484 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/simple-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Audio Card Driver Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+definitions:
+
+  frame-master:
+    description: Indicates dai-link frame master.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+      - maxItems: 1
+
+  bitclock-master:
+    description: Indicates dai-link bit clock master
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+      - maxItems: 1
+
+  frame-inversion:
+    description: dai-link uses frame clock inversion
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  bitclock-inversion:
+    description: dai-link uses bit clock inversion
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  dai-tdm-slot-num:
+    description: see tdm-slot.txt.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  dai-tdm-slot-width:
+    description: see tdm-slot.txt.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  system-clock-frequency:
+    description: |
+      If a clock is specified and a multiplication factor is given with
+      mclk-fs, the clock will be set to the calculated mclk frequency
+      when the stream starts.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  system-clock-direction-out:
+    description: |
+      specifies clock direction as 'out' on initialization.
+      It is useful for some aCPUs with fixed clocks.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  mclk-fs:
+    description: |
+      Multiplication factor between stream rate and codec mclk.
+      When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  aux-devs:
+    description: |
+      List of phandles pointing to auxiliary devices, such
+      as amplifiers, to be added to the sound card.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  convert-rate:
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  convert-channels:
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  prefix:
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+
+  label:
+    maxItems: 1
+
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  pin-switches:
+    description: the widget names for which pin switches must be created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  format:
+    description: audio format.
+    items:
+      enum:
+        - i2s
+        - right_j
+        - left_j
+        - dsp_a
+        - dsp_b
+        - ac97
+        - pdm
+        - msb
+        - lsb
+
+  dai:
+    type: object
+    properties:
+      sound-dai:
+        maxItems: 1
+
+      # common properties
+      mclk-fs:
+        $ref: "#/definitions/mclk-fs"
+      prefix:
+        $ref: "#/definitions/prefix"
+      frame-inversion:
+        $ref: "#/definitions/frame-inversion"
+      bitclock-inversion:
+        $ref: "#/definitions/bitclock-inversion"
+      frame-master:
+        $ref: /schemas/types.yaml#/definitions/flag
+      bitclock-master:
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      dai-tdm-slot-num:
+        $ref: "#/definitions/dai-tdm-slot-num"
+      dai-tdm-slot-width:
+        $ref: "#/definitions/dai-tdm-slot-width"
+      clocks:
+        maxItems: 1
+      system-clock-frequency:
+        $ref: "#/definitions/system-clock-frequency"
+      system-clock-direction-out:
+        $ref: "#/definitions/system-clock-direction-out"
+    required:
+      - sound-dai
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - simple-audio-card
+        - simple-scu-audio-card
+
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 0
+
+  label:
+    $ref: "#/definitions/label"
+
+  simple-audio-card,name:
+    description: User specified audio sound card name.
+    $ref: /schemas/types.yaml#/definitions/string
+
+# use patternProperties to avoid naming "xxx,yyy" issue
+patternProperties:
+  "^simple-audio-card,widgets$":
+    $ref: "#/definitions/widgets"
+  "^simple-audio-card,routing$":
+    $ref: "#/definitions/routing"
+  "^simple-audio-card,cpu(@[0-9a-f]+)?":
+    $ref: "#/definitions/dai"
+  "^simple-audio-card,codec(@[0-9a-f]+)?":
+    $ref: "#/definitions/dai"
+
+  # common properties
+  "^simple-audio-card,frame-master$":
+    $ref: "#/definitions/frame-master"
+  "^simple-audio-card,bitclock-master$":
+    $ref: "#/definitions/bitclock-master"
+  "^simple-audio-card,frame-inversion$":
+    $ref: "#/definitions/frame-inversion"
+  "^simple-audio-card,bitclock-inversion$":
+    $ref: "#/definitions/bitclock-inversion"
+  "^simple-audio-card,format$":
+    $ref: "#/definitions/format"
+  "^simple-audio-card,mclk-fs$":
+    $ref: "#/definitions/mclk-fs"
+  "^simple-audio-card,aux-devs$":
+    $ref: "#/definitions/aux-devs"
+  "^simple-audio-card,convert-rate$":
+    $ref: "#/definitions/convert-rate"
+  "^simple-audio-card,convert-channels$":
+    $ref: "#/definitions/convert-channels"
+  "^simple-audio-card,prefix$":
+    $ref: "#/definitions/prefix"
+  "^simple-audio-card,pin-switches$":
+    $ref: "#/definitions/pin-switches"
+  "^simple-audio-card,hp-det-gpio$":
+    maxItems: 1
+  "^simple-audio-card,mic-det-gpio$":
+    maxItems: 1
+
+  "^simple-audio-card,dai-link(@[0-9a-f]+)?$":
+    description: |
+      Container for dai-link level properties and the CPU and CODEC sub-nodes.
+      This container may be omitted when the card has only one DAI link.
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+      # common properties
+      frame-master:
+        $ref: "#/definitions/frame-master"
+      bitclock-master:
+        $ref: "#/definitions/bitclock-master"
+      frame-inversion:
+        $ref: "#/definitions/frame-inversion"
+      bitclock-inversion:
+        $ref: "#/definitions/bitclock-inversion"
+      format:
+        $ref: "#/definitions/format"
+      mclk-fs:
+        $ref: "#/definitions/mclk-fs"
+      aux-devs:
+        $ref: "#/definitions/aux-devs"
+      convert-rate:
+        $ref: "#/definitions/convert-rate"
+      convert-channels:
+        $ref: "#/definitions/convert-channels"
+      prefix:
+        $ref: "#/definitions/prefix"
+      pin-switches:
+        $ref: "#/definitions/pin-switches"
+      hp-det-gpio:
+        maxItems: 1
+      mic-det-gpio:
+        maxItems: 1
+
+    patternProperties:
+      "^cpu(@[0-9a-f]+)?":
+        $ref: "#/definitions/dai"
+      "^codec(@[0-9a-f]+)?":
+        $ref: "#/definitions/dai"
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+#--------------------
+# single DAI link
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        simple-audio-card,name = "VF610-Tower-Sound-Card";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&dailink0_master>;
+        simple-audio-card,frame-master = <&dailink0_master>;
+        simple-audio-card,widgets =
+                "Microphone", "Microphone Jack",
+                "Headphone", "Headphone Jack",
+                "Speaker", "External Speaker";
+        simple-audio-card,routing =
+                "MIC_IN", "Microphone Jack",
+                "Headphone Jack", "HP_OUT",
+                "External Speaker", "LINE_OUT";
+
+        simple-audio-card,cpu {
+            sound-dai = <&sh_fsi2 0>;
+        };
+
+        dailink0_master: simple-audio-card,codec {
+            sound-dai = <&ak4648>;
+            clocks = <&osc>;
+        };
+    };
+
+#--------------------
+# Multi DAI links
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        simple-audio-card,name = "Cubox Audio";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        simple-audio-card,dai-link@0 {		/* I2S - HDMI */
+            reg = <0>;
+            format = "i2s";
+            cpu {
+                sound-dai = <&audio0>;
+            };
+            codec {
+                sound-dai = <&tda998x0>;
+            };
+        };
+
+        simple-audio-card,dai-link@1 {		/* S/PDIF - HDMI */
+            reg = <1>;
+            cpu {
+                sound-dai = <&audio1>;
+            };
+            codec {
+                sound-dai = <&tda998x1>;
+            };
+        };
+
+        simple-audio-card,dai-link@2 {		/* S/PDIF - S/PDIF */
+            reg = <2>;
+            cpu {
+                sound-dai = <&audio2>;
+            };
+            codec {
+                sound-dai = <&spdif_codec>;
+            };
+        };
+    };
+
+#--------------------
+# route audio from IMX6 SSI2 through TLV320DAC3100 codec
+# through TPA6130A2 amplifier to headphones:
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,widgets =
+            "Headphone", "Headphone Jack";
+        simple-audio-card,routing =
+            "Headphone Jack", "HPLEFT",
+            "Headphone Jack", "HPRIGHT",
+            "LEFTIN", "HPL",
+            "RIGHTIN", "HPR";
+        simple-audio-card,aux-devs = <&amp>;
+        simple-audio-card,cpu {
+            sound-dai = <&ssi2>;
+        };
+        simple-audio-card,codec {
+            sound-dai = <&codec>;
+            clocks = <&clocks>;
+        };
+    };
+
+#--------------------
+# Sampling Rate Conversion
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,name = "rsnd-ak4643";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&sndcodec>;
+        simple-audio-card,frame-master = <&sndcodec>;
+
+        simple-audio-card,convert-rate = <48000>;
+
+        simple-audio-card,prefix = "ak4642";
+        simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+                                    "DAI0 Capture", "ak4642 Capture";
+
+        sndcpu: simple-audio-card,cpu {
+            sound-dai = <&rcar_sound>;
+        };
+
+        sndcodec: simple-audio-card,codec {
+            sound-dai = <&ak4643>;
+            system-clock-frequency = <11289600>;
+        };
+    };
+
+#--------------------
+# 2 CPU 1 Codec (Mixing)
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,name = "rsnd-ak4643";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&dpcmcpu>;
+        simple-audio-card,frame-master = <&dpcmcpu>;
+
+        simple-audio-card,convert-rate = <48000>;
+        simple-audio-card,convert-channels = <2>;
+
+        simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+                                    "ak4642 Playback", "DAI1 Playback";
+
+        dpcmcpu: simple-audio-card,cpu@0 {
+            sound-dai = <&rcar_sound 0>;
+        };
+
+        simple-audio-card,cpu@1 {
+            sound-dai = <&rcar_sound 1>;
+        };
+
+        simple-audio-card,codec {
+            prefix = "ak4642";
+            sound-dai = <&ak4643>;
+            clocks = <&audio_clock>;
+        };
+    };
+
+#--------------------
+# Multi DAI links with DPCM:
+#
+# CPU0 ------ ak4613
+# CPU1 ------ PCM3168A-p  /* DPCM 1ch/2ch */
+# CPU2 --/                /* DPCM 3ch/4ch */
+# CPU3 --/                /* DPCM 5ch/6ch */
+# CPU4 --/                /* DPCM 7ch/8ch */
+# CPU5 ------ PCM3168A-c
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,routing =
+            "pcm3168a Playback", "DAI1 Playback",
+            "pcm3168a Playback", "DAI2 Playback",
+            "pcm3168a Playback", "DAI3 Playback",
+            "pcm3168a Playback", "DAI4 Playback";
+
+        simple-audio-card,dai-link@0 {
+            format = "left_j";
+            bitclock-master = <&sndcpu0>;
+            frame-master = <&sndcpu0>;
+
+            sndcpu0: cpu {
+                sound-dai = <&rcar_sound 0>;
+            };
+            codec {
+                sound-dai = <&ak4613>;
+            };
+        };
+
+        simple-audio-card,dai-link@1 {
+            format = "i2s";
+            bitclock-master = <&sndcpu1>;
+            frame-master = <&sndcpu1>;
+
+            convert-channels = <8>; /* TDM Split */
+
+            sndcpu1: cpu@0 {
+                sound-dai = <&rcar_sound 1>;
+            };
+            cpu@1 {
+                sound-dai = <&rcar_sound 2>;
+            };
+            cpu@2 {
+                sound-dai = <&rcar_sound 3>;
+            };
+            cpu@3 {
+                sound-dai = <&rcar_sound 4>;
+            };
+            codec {
+                mclk-fs = <512>;
+                prefix = "pcm3168a";
+                dai-tdm-slot-num = <8>;
+                sound-dai = <&pcm3168a 0>;
+            };
+        };
+
+        simple-audio-card,dai-link@2 {
+            format = "i2s";
+            bitclock-master = <&sndcpu2>;
+            frame-master = <&sndcpu2>;
+
+            sndcpu2: cpu {
+                sound-dai = <&rcar_sound 5>;
+            };
+            codec {
+                mclk-fs = <512>;
+                prefix = "pcm3168a";
+                sound-dai = <&pcm3168a 1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/zl38060.yaml
new file mode 100644
index 000000000000..338e2a13c775
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/zl38060.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/zl38060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZL38060 Connected Home Audio Processor from Microsemi.
+
+description: |
+  The ZL38060 is a "Connected Home Audio Processor" from Microsemi,
+  which consists of a Digital Signal Processor (DSP), several Digital
+  Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
+
+maintainers:
+  - Jaroslav Kysela <perex@perex.cz>
+  - Takashi Iwai <tiwai@suse.com>
+
+properties:
+  compatible:
+    const: mscc,zl38060
+
+  reg:
+    description:
+      SPI device address.
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  reset-gpios:
+    description:
+      A GPIO line handling reset of the chip. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW (see ../gpio/gpio.txt)
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec: zl38060@0 {
+            gpio-controller;
+            #gpio-cells = <2>;
+            #sound-dai-cells = <0>;
+            compatible = "mscc,zl38060";
+            reg = <0>;
+            spi-max-frequency = <12000000>;
+            reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
index ad7ac80a3841..f5e518d099f2 100644
--- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
@@ -26,6 +26,16 @@ Required properties:
     "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
     "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
 						   BRCMSTB  SoCs
+    "brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7429-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7435-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7216-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
     "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"     : MSPI+BSPI on Cygnus, NSP
     "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"     : NS2 SoCs
 
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index 5c16cf59ca00..0178831b0662 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm Quad Serial Peripheral Interface (QSPI)
 
 maintainers:
- - Mukesh Savaliya <msavaliy@codeaurora.org>
- - Akash Asthana <akashast@codeaurora.org>
+  - Mukesh Savaliya <msavaliy@codeaurora.org>
+  - Akash Asthana <akashast@codeaurora.org>
 
-description:
- The QSPI controller allows SPI protocol communication in single, dual, or quad
- wire transmission modes for read/write access to slaves such as NOR flash.
+description: The QSPI controller allows SPI protocol communication in single,
+  dual, or quad wire transmission modes for read/write access to slaves such
+  as NOR flash.
 
 allOf:
   - $ref: /spi/spi-controller.yaml#
diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
index c429cf4bea5b..f492cb9fea12 100644
--- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -16,8 +16,8 @@ properties:
   compatible:
     items:
       - enum:
-        - renesas,hspi-r8a7778 # R-Car M1A
-        - renesas,hspi-r8a7779 # R-Car H1
+          - renesas,hspi-r8a7778 # R-Car M1A
+          - renesas,hspi-r8a7779 # R-Car H1
       - const: renesas,hspi
 
   reg:
diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
new file mode 100644
index 000000000000..c54ac059043f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,rspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas (Quad) Serial Peripheral Interface (RSPI/QSPI)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,rspi-sh7757    # SH7757
+          - const: renesas,rspi        # Legacy SH
+
+      - items:
+          - enum:
+              - renesas,rspi-r7s72100  # RZ/A1H
+              - renesas,rspi-r7s9210   # RZ/A2
+          - const: renesas,rspi-rz     # RZ/A
+
+      - items:
+          - enum:
+              - renesas,qspi-r8a7743   # RZ/G1M
+              - renesas,qspi-r8a7744   # RZ/G1N
+              - renesas,qspi-r8a7745   # RZ/G1E
+              - renesas,qspi-r8a77470  # RZ/G1C
+              - renesas,qspi-r8a7790   # R-Car H2
+              - renesas,qspi-r8a7791   # R-Car M2-W
+              - renesas,qspi-r8a7792   # R-Car V2H
+              - renesas,qspi-r8a7793   # R-Car M2-N
+              - renesas,qspi-r8a7794   # R-Car E2
+          - const: renesas,qspi        # R-Car Gen2 and RZ/G1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    oneOf:
+      - items:
+          - description: A combined interrupt
+      - items:
+          - description: Error interrupt (SPEI)
+          - description: Receive Interrupt (SPRI)
+          - description: Transmit Interrupt (SPTI)
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: mux
+      - items:
+          - const: error
+          - const: rx
+          - const: tx
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  num-cs:
+    description: |
+      Total number of native chip selects.
+      Hardware limitations related to chip selects:
+        - When using GPIO chip selects, at least one native chip select must
+          be left unused, as it will be driven anyway.
+    minimum: 1
+    maximum: 2
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rspi-rz
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,qspi
+    then:
+      required:
+        - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    qspi: spi@e6b10000 {
+            compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+            reg = <0xe6b10000 0x2c>;
+            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 917>;
+            dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 917>;
+            num-cs = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
index dfb697c69341..22ba4e90655b 100644
--- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -51,7 +51,7 @@ properties:
 
   pl022,rt:
     description: indicates the controller should run the message pump with realtime
-               priority to minimise the transfer latency on the bus (boolean)
+      priority to minimise the transfer latency on the bus (boolean)
     type: boolean
 
   dmas:
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
deleted file mode 100644
index 421722b93992..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-rspi.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Device tree configuration for Renesas RSPI/QSPI driver
-
-Required properties:
-- compatible       : For Renesas Serial Peripheral Interface on legacy SH:
-		     "renesas,rspi-<soctype>", "renesas,rspi" as fallback.
-		     For Renesas Serial Peripheral Interface on RZ/A:
-		     "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
-		     For Quad Serial Peripheral Interface on R-Car Gen2 and
-		     RZ/G1 devices:
-		     "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
-		     Examples with soctypes are:
-		        - "renesas,rspi-sh7757" (SH)
-			- "renesas,rspi-r7s72100" (RZ/A1H)
-			- "renesas,rspi-r7s9210" (RZ/A2)
-			- "renesas,qspi-r8a7743" (RZ/G1M)
-			- "renesas,qspi-r8a7744" (RZ/G1N)
-			- "renesas,qspi-r8a7745" (RZ/G1E)
-			- "renesas,qspi-r8a77470" (RZ/G1C)
-			- "renesas,qspi-r8a7790" (R-Car H2)
-			- "renesas,qspi-r8a7791" (R-Car M2-W)
-			- "renesas,qspi-r8a7792" (R-Car V2H)
-			- "renesas,qspi-r8a7793" (R-Car M2-N)
-			- "renesas,qspi-r8a7794" (R-Car E2)
-- reg              : Address start and address range size of the device
-- interrupts       : A list of interrupt-specifiers, one for each entry in
-		     interrupt-names.
-		     If interrupt-names is not present, an interrupt specifier
-		     for a single muxed interrupt.
-- interrupt-names  : A list of interrupt names. Should contain (if present):
-		       - "error" for SPEI,
-		       - "rx" for SPRI,
-		       - "tx" to SPTI,
-		       - "mux" for a single muxed interrupt.
-- num-cs	   : Number of chip selects. Some RSPI cores have more than 1.
-- #address-cells   : Must be <1>
-- #size-cells      : Must be <0>
-
-Optional properties:
-- clocks           : Must contain a reference to the functional clock.
-- dmas             : Must contain a list of two references to DMA specifiers,
-		     one for transmission, and one for reception.
-- dma-names        : Must contain a list of two DMA names, "tx" and "rx".
-
-Pinctrl properties might be needed, too.  See
-Documentation/devicetree/bindings/pinctrl/renesas,*.
-
-Examples:
-
-	spi0: spi@e800c800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800c800 0x24>;
-		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		interrupt-parent = <&gic>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi: spi@e6b10000 {
-		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-		reg = <0 0xe6b10000 0 0x2c>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
index 3665a5fe6b7f..1a342ce1f798 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -24,8 +24,8 @@ properties:
 
   reg-names:
     items:
-     - const: qspi
-     - const: qspi_mm
+      - const: qspi
+      - const: qspi_mm
 
   clocks:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
index 4b5509436588..f5825935fd22 100644
--- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -29,8 +29,8 @@ properties:
       - const: allwinner,sun4i-a10-system-control
       - const: allwinner,sun5i-a13-system-control
       - items:
-        - const: allwinner,sun7i-a20-system-control
-        - const: allwinner,sun4i-a10-system-control
+          - const: allwinner,sun7i-a20-system-control
+          - const: allwinner,sun4i-a10-system-control
       - const: allwinner,sun8i-a23-system-control
       - const: allwinner,sun8i-h3-system-control
       - const: allwinner,sun50i-a64-sram-controller
@@ -38,11 +38,11 @@ properties:
       - const: allwinner,sun50i-a64-system-control
       - const: allwinner,sun50i-h5-system-control
       - items:
-        - const: allwinner,sun50i-h6-system-control
-        - const: allwinner,sun50i-a64-system-control
+          - const: allwinner,sun50i-h6-system-control
+          - const: allwinner,sun50i-a64-system-control
       - items:
-        - const: allwinner,suniv-f1c100s-system-control
-        - const: allwinner,sun4i-a10-system-control
+          - const: allwinner,suniv-f1c100s-system-control
+          - const: allwinner,sun4i-a10-system-control
 
   reg:
     maxItems: 1
@@ -69,44 +69,44 @@ patternProperties:
               - const: allwinner,sun4i-a10-sram-d
               - const: allwinner,sun50i-a64-sram-c
               - items:
-                - const: allwinner,sun5i-a13-sram-a3-a4
-                - const: allwinner,sun4i-a10-sram-a3-a4
+                  - const: allwinner,sun5i-a13-sram-a3-a4
+                  - const: allwinner,sun4i-a10-sram-a3-a4
               - items:
-                - const: allwinner,sun7i-a20-sram-a3-a4
-                - const: allwinner,sun4i-a10-sram-a3-a4
+                  - const: allwinner,sun7i-a20-sram-a3-a4
+                  - const: allwinner,sun4i-a10-sram-a3-a4
               - items:
-                - const: allwinner,sun5i-a13-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun5i-a13-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun7i-a20-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun7i-a20-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun8i-a23-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun8i-a23-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun8i-h3-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun8i-h3-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun50i-a64-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun50i-a64-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun50i-h5-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun50i-h5-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun50i-h6-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun50i-h6-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun5i-a13-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - const: allwinner,sun5i-a13-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,sun7i-a20-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - const: allwinner,sun7i-a20-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,suniv-f1c100s-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - const: allwinner,suniv-f1c100s-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,sun50i-h6-sram-c
-                - const: allwinner,sun50i-a64-sram-c
+                  - const: allwinner,sun50i-h6-sram-c
+                  - const: allwinner,sun50i-a64-sram-c
 
 required:
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt b/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt
deleted file mode 100644
index 6b42fda306ff..000000000000
--- a/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Rockchip SRAM for pmu:
-------------------------------
-
-The sram of pmu is used to store the function of resume from maskrom(the 1st
-level loader). This is a common use of the "pmu-sram" because it keeps power
-even in low power states in the system.
-
-Required node properties:
-- compatible : should be "rockchip,rk3288-pmu-sram"
-- reg : physical base address and the size of the registers window
-
-Example:
-	sram@ff720000 {
-		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
-		reg = <0xff720000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
index 7b83cc6c9bfa..19d116ff9ddc 100644
--- a/Documentation/devicetree/bindings/sram/sram.yaml
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -29,6 +29,7 @@ properties:
       enum:
         - mmio-sram
         - atmel,sama5d2-securam
+        - rockchip,rk3288-pmu-sram
 
   reg:
     maxItems: 1
@@ -73,6 +74,8 @@ patternProperties:
             - allwinner,sun50i-a64-sram-c
             - amlogic,meson8-smp-sram
             - amlogic,meson8b-smp-sram
+            - amlogic,meson-gxbb-scp-shmem
+            - amlogic,meson-axg-scp-shmem
             - renesas,smp-sram
             - rockchip,rk3066-smp-sram
             - samsung,exynos4210-sysram
@@ -118,9 +121,18 @@ patternProperties:
 required:
   - compatible
   - reg
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: rockchip,rk3288-pmu-sram
+
+else:
+  required:
+    - "#address-cells"
+    - "#size-cells"
+    - ranges
 
 additionalProperties: false
 
@@ -223,6 +235,16 @@ examples:
         };
     };
 
+  - |
+    // Rockchip's rk3288 SoC uses the sram of pmu to store the function of
+    // resume from maskrom(the 1st level loader). This is a common use of
+    // the "pmu-sram" because it keeps power even in low power states
+    // in the system.
+    sram@ff720000 {
+      compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+      reg = <0xff720000 0x1000>;
+    };
+
   - |
     // Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
     // primary core (cpu0). Once the core gets powered up it checks if a magic
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index e43ec50bda37..999c6b365f1d 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal
 
 properties:
   compatible:
-      items:
-        - enum:
-            - amlogic,g12a-cpu-thermal
-            - amlogic,g12a-ddr-thermal
-        - const: amlogic,g12a-thermal
+    items:
+      - enum:
+          - amlogic,g12a-cpu-thermal
+          - amlogic,g12a-ddr-thermal
+      - const: amlogic,g12a-thermal
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
new file mode 100644
index 000000000000..25b9209c2e5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM654 VTM (DTS) binding
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,am654-vtm
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    vtm: thermal@42050000 {
+        compatible = "ti,am654-vtm";
+        reg = <0x0 0x42050000 0x0 0x25c>;
+        power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+        #thermal-sensor-cells = <1>;
+    };
+
+    mpu0_thermal: mpu0_thermal {
+        polling-delay-passive = <250>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
+        thermal-sensors = <&vtm0 0>;
+
+        trips {
+                mpu0_crit: mpu0_crit {
+                        temperature = <125000>; /* milliCelsius */
+                        hysteresis = <2000>; /* milliCelsius */
+                        type = "critical";
+                };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
index fa255672e8e5..135186f83925 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -28,10 +28,10 @@ properties:
               - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv7-timer
+              - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv8-timer
+              - arm,armv8-timer
 
   interrupts:
     items:
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index 582bbef62b95..6ff718ede184 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -20,7 +20,7 @@ properties:
   compatible:
     items:
       - enum:
-        - arm,armv7-timer-mem
+          - arm,armv7-timer-mem
 
   reg:
     maxItems: 1
@@ -77,7 +77,7 @@ patternProperties:
           - description: physical timer irq
           - description: virtual timer irq
 
-      reg :
+      reg:
         minItems: 1
         maxItems: 2
         items:
diff --git a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
deleted file mode 100644
index eeee6cd51e5c..000000000000
--- a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Cadence TTC - Triple Timer Counter
-
-Required properties:
-- compatible : Should be "cdns,ttc".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 3 interrupts; one per timer channel.
-- clocks: phandle to the source clock
-
-Optional properties:
-- timer-width: Bit width of the timer, necessary if not 16.
-
-Example:
-
-ttc0: ttc0@f8001000 {
-	interrupt-parent = <&intc>;
-	interrupts = < 0 10 4 0 11 4 0 12 4 >;
-	compatible = "cdns,ttc";
-	reg = <0xF8001000 0x1000>;
-	clocks = <&cpu_clk 3>;
-	timer-width = <32>;
-};
diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
new file mode 100644
index 000000000000..c532b60b9c63
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/cdns,ttc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence TTC - Triple Timer Counter
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+properties:
+  compatible:
+    const: cdns,ttc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+    description: |
+      A list of 3 interrupts; one per timer channel.
+
+  clocks:
+    maxItems: 1
+
+  timer-width:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: |
+      Bit width of the timer, necessary if not 16.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    ttc0: ttc0@f8001000 {
+        interrupt-parent = <&intc>;
+        interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+        compatible = "cdns,ttc";
+        reg = <0xF8001000 0x1000>;
+        clocks = <&cpu_clk 3>;
+        timer-width = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
deleted file mode 100644
index 91f704951845..000000000000
--- a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
-==========================================================
-
-For a description of the TCU hardware and drivers, have a look at
-Documentation/mips/ingenic-tcu.rst.
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4740-tcu
-  * ingenic,jz4725b-tcu
-  * ingenic,jz4770-tcu
-  * ingenic,x1000-tcu
-  followed by "simple-mfd".
-- reg: Should be the offset/length value corresponding to the TCU registers
-- clocks: List of phandle & clock specifiers for clocks external to the TCU.
-  The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock
-  should be provided if the SoC has it.
-- clock-names: List of name strings for the external clocks.
-- #clock-cells: Should be <1>;
-  Clock consumers specify this argument to identify a clock. The valid values
-  may be found in <dt-bindings/clock/ingenic,tcu.h>.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value should be 1.
-- interrupts : Specifies the interrupt the controller is connected to.
-
-Optional properties:
-
-- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use.
-  Default value is 0xfc.
-
-
-Children nodes
-==========================================================
-
-
-PWM node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4740-pwm
-  * ingenic,jz4725b-pwm
-- #pwm-cells: Should be 3. See ../pwm/pwm.yaml for a description of the cell
-  format.
-- clocks: List of phandle & clock specifiers for the TCU clocks.
-- clock-names: List of name strings for the TCU clocks.
-
-
-Watchdog node:
---------------
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-watchdog"
-- clocks: phandle to the WDT clock
-- clock-names: should be "wdt"
-
-
-OS Timer node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4725b-ost
-  * ingenic,jz4770-ost
-- clocks: phandle to the OST clock
-- clock-names: should be "ost"
-- interrupts : Specifies the interrupt the OST is connected to.
-
-
-Example
-==========================================================
-
-#include <dt-bindings/clock/jz4770-cgu.h>
-#include <dt-bindings/clock/ingenic,tcu.h>
-
-/ {
-	tcu: timer@10002000 {
-		compatible = "ingenic,jz4770-tcu", "simple-mfd";
-		reg = <0x10002000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x10002000 0x1000>;
-
-		#clock-cells = <1>;
-
-		clocks = <&cgu JZ4770_CLK_RTC
-			  &cgu JZ4770_CLK_EXT
-			  &cgu JZ4770_CLK_PCLK>;
-		clock-names = "rtc", "ext", "pclk";
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <27 26 25>;
-
-		watchdog: watchdog@0 {
-			compatible = "ingenic,jz4740-watchdog";
-			reg = <0x0 0xc>;
-
-			clocks = <&tcu TCU_CLK_WDT>;
-			clock-names = "wdt";
-		};
-
-		pwm: pwm@40 {
-			compatible = "ingenic,jz4740-pwm";
-			reg = <0x40 0x80>;
-
-			#pwm-cells = <3>;
-
-			clocks = <&tcu TCU_CLK_TIMER0
-				  &tcu TCU_CLK_TIMER1
-				  &tcu TCU_CLK_TIMER2
-				  &tcu TCU_CLK_TIMER3
-				  &tcu TCU_CLK_TIMER4
-				  &tcu TCU_CLK_TIMER5
-				  &tcu TCU_CLK_TIMER6
-				  &tcu TCU_CLK_TIMER7>;
-			clock-names = "timer0", "timer1", "timer2", "timer3",
-				      "timer4", "timer5", "timer6", "timer7";
-		};
-
-		ost: timer@e0 {
-			compatible = "ingenic,jz4770-ost";
-			reg = <0xe0 0x20>;
-
-			clocks = <&tcu TCU_CLK_OST>;
-			clock-names = "ost";
-
-			interrupts = <15>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
new file mode 100644
index 000000000000..e21e9972ed65
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
@@ -0,0 +1,281 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ingenic,tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Timer/Counter Unit (TCU) devicetree bindings
+
+description: |
+  For a description of the TCU hardware and drivers, have a look at
+  Documentation/mips/ingenic-tcu.rst.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-tcu
+          - ingenic,jz4725b-tcu
+          - ingenic,jz4770-tcu
+          - ingenic,jz4780-tcu
+          - ingenic,x1000-tcu
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^timer@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  ranges: true
+
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - ingenic,jz4740-tcu
+          - ingenic,jz4725b-tcu
+          - ingenic,jz4770-tcu
+          - ingenic,x1000-tcu
+        - const: simple-mfd
+      - items:
+        - const: ingenic,jz4780-tcu
+        - const: ingenic,jz4770-tcu
+        - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RTC clock
+      - description: EXT clock
+      - description: PCLK clock
+      - description: TCU clock
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: ext
+      - const: pclk
+      - const: tcu
+    minItems: 3
+
+  interrupts:
+    items:
+      - description: TCU0 interrupt
+      - description: TCU1 interrupt
+      - description: TCU2 interrupt
+    minItems: 1
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 8
+
+  ingenic,pwm-channels-mask:
+    description: Bitmask of TCU channels reserved for PWM use.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0x00
+      - maximum: 0xff
+      - default: 0xfc
+
+patternProperties:
+  "^watchdog@[a-f0-9]+$":
+    type: object
+    allOf: [ $ref: ../watchdog/watchdog.yaml# ]
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+            - ingenic,jz4740-watchdog
+            - ingenic,jz4780-watchdog
+          - items:
+            - const: ingenic,jz4770-watchdog
+            - const: ingenic,jz4740-watchdog
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: wdt
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+  "^pwm@[a-f0-9]+$":
+    type: object
+    allOf: [ $ref: ../pwm/pwm.yaml# ]
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+            - ingenic,jz4740-pwm
+          - items:
+            - enum:
+              - ingenic,jz4770-pwm
+              - ingenic,jz4780-pwm
+            - const: ingenic,jz4740-pwm
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        minItems: 6
+        maxItems: 8
+
+      clock-names:
+        items:
+          - const: timer0
+          - const: timer1
+          - const: timer2
+          - const: timer3
+          - const: timer4
+          - const: timer5
+          - const: timer6
+          - const: timer7
+        minItems: 6
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+  "^timer@[a-f0-9]+$":
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+            - ingenic,jz4725b-ost
+            - ingenic,jz4770-ost
+          - items:
+            - const: ingenic,jz4780-ost
+            - const: ingenic,jz4770-ost
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: ost
+
+      interrupts:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+      - interrupts
+
+    additionalProperties: false
+
+required:
+  - "#clock-cells"
+  - "#interrupt-cells"
+  - interrupt-controller
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,tcu.h>
+    tcu: timer@10002000 {
+      compatible = "ingenic,jz4770-tcu", "simple-mfd";
+      reg = <0x10002000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x10002000 0x1000>;
+
+      #clock-cells = <1>;
+
+      clocks = <&cgu JZ4770_CLK_RTC>,
+               <&cgu JZ4770_CLK_EXT>,
+               <&cgu JZ4770_CLK_PCLK>;
+      clock-names = "rtc", "ext", "pclk";
+
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <27 26 25>;
+
+      watchdog: watchdog@0 {
+        compatible = "ingenic,jz4770-watchdog", "ingenic,jz4740-watchdog";
+        reg = <0x0 0xc>;
+
+        clocks = <&tcu TCU_CLK_WDT>;
+        clock-names = "wdt";
+      };
+
+      pwm: pwm@40 {
+        compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+        reg = <0x40 0x80>;
+
+        #pwm-cells = <3>;
+
+        clocks = <&tcu TCU_CLK_TIMER0>,
+                 <&tcu TCU_CLK_TIMER1>,
+                 <&tcu TCU_CLK_TIMER2>,
+                 <&tcu TCU_CLK_TIMER3>,
+                 <&tcu TCU_CLK_TIMER4>,
+                 <&tcu TCU_CLK_TIMER5>,
+                 <&tcu TCU_CLK_TIMER6>,
+                 <&tcu TCU_CLK_TIMER7>;
+        clock-names = "timer0", "timer1", "timer2", "timer3",
+                "timer4", "timer5", "timer6", "timer7";
+      };
+
+      ost: timer@e0 {
+        compatible = "ingenic,jz4770-ost";
+        reg = <0xe0 0x20>;
+
+        clocks = <&tcu TCU_CLK_OST>;
+        clock-names = "ost";
+
+        interrupts = <15>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 0d6d850a7f17..fb2f62aef5fa 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -62,14 +62,14 @@ properties:
 
   resets:
     items:
-     - description: common reset
-     - description: ecc reset
+      - description: common reset
+      - description: ecc reset
     minItems: 1
 
   reset-names:
     items:
-     - const: dwc2
-     - const: dwc2-ecc
+      - const: dwc2
+      - const: dwc2-ecc
     minItems: 1
 
   phys:
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 10edd05872ea..848eea59bc00 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -36,6 +36,9 @@ properties:
         - if a USB DRD channel: first clock should be host and second
           one should be peripheral
 
+  power-domains:
+    maxItems: 1
+
   big-endian:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index bcffec1f1341..d7efddf27b22 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -36,6 +36,9 @@ properties:
         - if a USB DRD channel: first clock should be host and second
           one should be peripheral
 
+  power-domains:
+    maxItems: 1
+
   big-endian:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
index c2d2ee43ba67..c334aea6b59d 100644
--- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
+++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
@@ -42,6 +42,9 @@ properties:
   phys:
     description: PHY specifier for the USB PHY
 
+  usb-role-switch:
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index d3891386d671..65c039c028b4 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -59,6 +59,8 @@ patternProperties:
     description: Allwinner Technology Co., Ltd.
   "^alphascale,.*":
     description: AlphaScale Integrated Circuits Systems, Inc.
+  "^alps,.*":
+    description: Alps Electric Co., Ltd.
   "^altr,.*":
     description: Altera Corp.
   "^amarula,.*":
@@ -143,6 +145,8 @@ patternProperties:
     description: BIPAI KEJI LIMITED
   "^beacon,.*":
     description: Compass Electronics Group, LLC
+  "^beagle,.*":
+    description: BeagleBoard.org Foundation
   "^bhf,.*":
     description: Beckhoff Automation GmbH & Co. KG
   "^bitmain,.*":
@@ -181,6 +185,8 @@ patternProperties:
     description: CDTech(H.K.) Electronics Limited
   "^ceva,.*":
     description: Ceva, Inc.
+  "^checkpoint,.*":
+    description: Check Point Software Technologies Ltd.
   "^chipidea,.*":
     description: Chipidea, Inc
   "^chipone,.*":
@@ -463,6 +469,8 @@ patternProperties:
     description: Infineon Technologies
   "^inforce,.*":
     description: Inforce Computing
+  "^ivo,.*":
+    description: InfoVision Optoelectronics Kunshan Co. Ltd.
   "^ingenic,.*":
     description: Ingenic Semiconductor
   "^innolux,.*":
@@ -808,6 +816,8 @@ patternProperties:
     description: Primux Trading, S.L.
   "^probox2,.*":
     description: PROBOX2 (by W2COMP Co., Ltd.)
+  "^prt,.*":
+    description: Protonic Holland
   "^pulsedlight,.*":
     description: PulsedLight, Inc
   "^purism,.*":
@@ -1093,6 +1103,8 @@ patternProperties:
     description: Waveshare Electronics
   "^wd,.*":
     description: Western Digital Corp.
+  "^we,.*":
+    description: Würth Elektronik GmbH.
   "^wetek,.*":
     description: WeTek Electronics, limited.
   "^wexler,.*":
@@ -1125,6 +1137,8 @@ patternProperties:
     description: Shenzhen Xinpeng Technology Co., Ltd
   "^xlnx,.*":
     description: Xilinx
+  "^xnano,.*":
+    description: Xnano
   "^xunlong,.*":
     description: Shenzhen Xunlong Software CO.,Limited
   "^xylon,.*":
diff --git a/Documentation/doc-guide/maintainer-profile.rst b/Documentation/doc-guide/maintainer-profile.rst
index 5afc0ddba40a..755d39f0d407 100644
--- a/Documentation/doc-guide/maintainer-profile.rst
+++ b/Documentation/doc-guide/maintainer-profile.rst
@@ -6,7 +6,7 @@ Documentation subsystem maintainer entry profile
 The documentation "subsystem" is the central coordinating point for the
 kernel's documentation and associated infrastructure.  It covers the
 hierarchy under Documentation/ (with the exception of
-Documentation/device-tree), various utilities under scripts/ and, at least
+Documentation/devicetree), various utilities under scripts/ and, at least
 some of the time, LICENSES/.
 
 It's worth noting, though, that the boundaries of this subsystem are rather
diff --git a/Documentation/doc-guide/parse-headers.rst b/Documentation/doc-guide/parse-headers.rst
index 24cfaa15dd81..f7135b058246 100644
--- a/Documentation/doc-guide/parse-headers.rst
+++ b/Documentation/doc-guide/parse-headers.rst
@@ -10,7 +10,7 @@ if a symbol is not found at the documentation. That helps to keep the
 uAPI documentation in sync with the Kernel changes.
 The :ref:`parse_headers.pl <parse_headers>` provide a way to generate such
 cross-references. It has to be called via Makefile, while building the
-documentation. Please see ``Documentation/media/Makefile`` for an example
+documentation. Please see ``Documentation/userspace-api/media/Makefile`` for an example
 about how to use it inside the Kernel tree.
 
 .. _parse_headers:
diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst
index c78db28519f7..63dec76d1d8d 100644
--- a/Documentation/driver-api/dma-buf.rst
+++ b/Documentation/driver-api/dma-buf.rst
@@ -11,7 +11,7 @@ course not limited to GPU use cases.
 The three main components of this are: (1) dma-buf, representing a
 sg_table and exposed to userspace as a file descriptor to allow passing
 between devices, (2) fence, which provides a mechanism to signal when
-one device as finished access, and (3) reservation, which manages the
+one device has finished access, and (3) reservation, which manages the
 shared or exclusive fence(s) associated with the buffer.
 
 Shared DMA Buffers
@@ -31,7 +31,7 @@ The exporter
  - implements and manages operations in :c:type:`struct dma_buf_ops
    <dma_buf_ops>` for the buffer,
  - allows other users to share the buffer by using dma_buf sharing APIs,
- - manages the details of buffer allocation, wrapped int a :c:type:`struct
+ - manages the details of buffer allocation, wrapped in a :c:type:`struct
    dma_buf <dma_buf>`,
  - decides about the actual backing storage where this allocation happens,
  - and takes care of any migration of scatterlist - for all (shared) users of
diff --git a/Documentation/driver-api/driver-model/device.rst b/Documentation/driver-api/driver-model/device.rst
index 2b868d49d349..b9b022371e85 100644
--- a/Documentation/driver-api/driver-model/device.rst
+++ b/Documentation/driver-api/driver-model/device.rst
@@ -50,10 +50,10 @@ Attributes
 
 Attributes of devices can be exported by a device driver through sysfs.
 
-Please see Documentation/filesystems/sysfs.txt for more information
+Please see Documentation/filesystems/sysfs.rst for more information
 on how sysfs works.
 
-As explained in Documentation/kobject.txt, device attributes must be
+As explained in Documentation/core-api/kobject.rst, device attributes must be
 created before the KOBJ_ADD uevent is generated. The only way to realize
 that is by defining an attribute group.
 
diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
index 46c13780994c..91b0b8e5556c 100644
--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -284,21 +284,13 @@ I2C
 
 IIO
   devm_iio_device_alloc()
-  devm_iio_device_free()
   devm_iio_device_register()
-  devm_iio_device_unregister()
   devm_iio_kfifo_allocate()
-  devm_iio_kfifo_free()
   devm_iio_triggered_buffer_setup()
-  devm_iio_triggered_buffer_cleanup()
   devm_iio_trigger_alloc()
-  devm_iio_trigger_free()
   devm_iio_trigger_register()
-  devm_iio_trigger_unregister()
   devm_iio_channel_get()
-  devm_iio_channel_release()
   devm_iio_channel_get_all()
-  devm_iio_channel_release_all()
 
 INPUT
   devm_input_allocate_device()
diff --git a/Documentation/driver-api/driver-model/driver.rst b/Documentation/driver-api/driver-model/driver.rst
index 63887b813005..7d5040f6a3d8 100644
--- a/Documentation/driver-api/driver-model/driver.rst
+++ b/Documentation/driver-api/driver-model/driver.rst
@@ -4,7 +4,6 @@ Device Drivers
 
 See the kerneldoc for the struct device_driver.
 
-
 Allocation
 ~~~~~~~~~~
 
@@ -167,9 +166,26 @@ the driver to that device.
 
 A driver's probe() may return a negative errno value to indicate that
 the driver did not bind to this device, in which case it should have
-released all resources it allocated::
+released all resources it allocated.
+
+Optionally, probe() may return -EPROBE_DEFER if the driver depends on
+resources that are not yet available (e.g., supplied by a driver that
+hasn't initialized yet).  The driver core will put the device onto the
+deferred probe list and will try to call it again later. If a driver
+must defer, it should return -EPROBE_DEFER as early as possible to
+reduce the amount of time spent on setup work that will need to be
+unwound and reexecuted at a later time.
+
+.. warning::
+      -EPROBE_DEFER must not be returned if probe() has already created
+      child devices, even if those child devices are removed again
+      in a cleanup path. If -EPROBE_DEFER is returned after a child
+      device has been registered, it may result in an infinite loop of
+      .probe() calls to the same driver.
+
+::
 
-	void (*sync_state)(struct device *dev);
+	void	(*sync_state)	(struct device *dev);
 
 sync_state is called only once for a device. It's called when all the consumer
 devices of the device have successfully probed. The list of consumers of the
@@ -212,6 +228,8 @@ over management of devices from the bootloader, the usage of sync_state() is
 not restricted to that. Use it whenever it makes sense to take an action after
 all the consumers of a device have probed::
 
+::
+
 	int 	(*remove)	(struct device *dev);
 
 remove is called to unbind a driver from a device. This may be
@@ -224,11 +242,15 @@ not. It should free any resources allocated specifically for the
 device; i.e. anything in the device's driver_data field.
 
 If the device is still present, it should quiesce the device and place
-it into a supported low-power state::
+it into a supported low-power state.
+
+::
 
 	int	(*suspend)	(struct device *dev, pm_message_t state);
 
-suspend is called to put the device in a low power state::
+suspend is called to put the device in a low power state.
+
+::
 
 	int	(*resume)	(struct device *dev);
 
diff --git a/Documentation/driver-api/driver-model/overview.rst b/Documentation/driver-api/driver-model/overview.rst
index d4d1e9b40e0c..e98d0ab4a9b6 100644
--- a/Documentation/driver-api/driver-model/overview.rst
+++ b/Documentation/driver-api/driver-model/overview.rst
@@ -121,4 +121,4 @@ device-specific data or tunable interfaces.
 
 More information about the sysfs directory layout can be found in
 the other documents in this directory and in the file
-Documentation/filesystems/sysfs.txt.
+Documentation/filesystems/sysfs.rst.
diff --git a/Documentation/driver-api/iio/triggers.rst b/Documentation/driver-api/iio/triggers.rst
index 5c2156de6284..dfd7ba3eabde 100644
--- a/Documentation/driver-api/iio/triggers.rst
+++ b/Documentation/driver-api/iio/triggers.rst
@@ -4,9 +4,7 @@ Triggers
 
 * struct :c:type:`iio_trigger` — industrial I/O trigger device
 * :c:func:`devm_iio_trigger_alloc` — Resource-managed iio_trigger_alloc
-* :c:func:`devm_iio_trigger_free` — Resource-managed iio_trigger_free
 * :c:func:`devm_iio_trigger_register` — Resource-managed iio_trigger_register
-* :c:func:`devm_iio_trigger_unregister` — Resource-managed
   iio_trigger_unregister
 * :c:func:`iio_trigger_validate_own_device` — Check if a trigger and IIO
   device belong to the same device
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index d4e78cb3ef4d..dcc47c029f8e 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -63,6 +63,7 @@ available subsections can be seen below.
    pinctl
    gpio/index
    md/index
+   media/index
    misc_devices
    nfc/index
    dmaengine/index
diff --git a/Documentation/driver-api/media/cec-core.rst b/Documentation/driver-api/media/cec-core.rst
new file mode 100644
index 000000000000..3ce26b7c2b2b
--- /dev/null
+++ b/Documentation/driver-api/media/cec-core.rst
@@ -0,0 +1,474 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+CEC Kernel Support
+==================
+
+The CEC framework provides a unified kernel interface for use with HDMI CEC
+hardware. It is designed to handle a multiple types of hardware (receivers,
+transmitters, USB dongles). The framework also gives the option to decide
+what to do in the kernel driver and what should be handled by userspace
+applications. In addition it integrates the remote control passthrough
+feature into the kernel's remote control framework.
+
+
+The CEC Protocol
+----------------
+
+The CEC protocol enables consumer electronic devices to communicate with each
+other through the HDMI connection. The protocol uses logical addresses in the
+communication. The logical address is strictly connected with the functionality
+provided by the device. The TV acting as the communication hub is always
+assigned address 0. The physical address is determined by the physical
+connection between devices.
+
+The CEC framework described here is up to date with the CEC 2.0 specification.
+It is documented in the HDMI 1.4 specification with the new 2.0 bits documented
+in the HDMI 2.0 specification. But for most of the features the freely available
+HDMI 1.3a specification is sufficient:
+
+http://www.microprocessor.org/HDMISpecification13a.pdf
+
+
+CEC Adapter Interface
+---------------------
+
+The struct cec_adapter represents the CEC adapter hardware. It is created by
+calling cec_allocate_adapter() and deleted by calling cec_delete_adapter():
+
+.. c:function::
+   struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv,
+   const char *name, u32 caps, u8 available_las);
+
+.. c:function::
+   void cec_delete_adapter(struct cec_adapter *adap);
+
+To create an adapter you need to pass the following information:
+
+ops:
+	adapter operations which are called by the CEC framework and that you
+	have to implement.
+
+priv:
+	will be stored in adap->priv and can be used by the adapter ops.
+	Use cec_get_drvdata(adap) to get the priv pointer.
+
+name:
+	the name of the CEC adapter. Note: this name will be copied.
+
+caps:
+	capabilities of the CEC adapter. These capabilities determine the
+	capabilities of the hardware and which parts are to be handled
+	by userspace and which parts are handled by kernelspace. The
+	capabilities are returned by CEC_ADAP_G_CAPS.
+
+available_las:
+	the number of simultaneous logical addresses that this
+	adapter can handle. Must be 1 <= available_las <= CEC_MAX_LOG_ADDRS.
+
+To obtain the priv pointer use this helper function:
+
+.. c:function::
+	void *cec_get_drvdata(const struct cec_adapter *adap);
+
+To register the /dev/cecX device node and the remote control device (if
+CEC_CAP_RC is set) you call:
+
+.. c:function::
+	int cec_register_adapter(struct cec_adapter *adap, struct device *parent);
+
+where parent is the parent device.
+
+To unregister the devices call:
+
+.. c:function::
+	void cec_unregister_adapter(struct cec_adapter *adap);
+
+Note: if cec_register_adapter() fails, then call cec_delete_adapter() to
+clean up. But if cec_register_adapter() succeeded, then only call
+cec_unregister_adapter() to clean up, never cec_delete_adapter(). The
+unregister function will delete the adapter automatically once the last user
+of that /dev/cecX device has closed its file handle.
+
+
+Implementing the Low-Level CEC Adapter
+--------------------------------------
+
+The following low-level adapter operations have to be implemented in
+your driver:
+
+.. c:type:: struct cec_adap_ops
+
+.. code-block:: none
+
+	struct cec_adap_ops
+	{
+		/* Low-level callbacks */
+		int (*adap_enable)(struct cec_adapter *adap, bool enable);
+		int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable);
+		int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable);
+		int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
+		int (*adap_transmit)(struct cec_adapter *adap, u8 attempts,
+				      u32 signal_free_time, struct cec_msg *msg);
+		void (*adap_status)(struct cec_adapter *adap, struct seq_file *file);
+		void (*adap_free)(struct cec_adapter *adap);
+
+		/* Error injection callbacks */
+		...
+
+		/* High-level callbacks */
+		...
+	};
+
+The seven low-level ops deal with various aspects of controlling the CEC adapter
+hardware:
+
+
+To enable/disable the hardware:
+
+.. c:function::
+	int (*adap_enable)(struct cec_adapter *adap, bool enable);
+
+This callback enables or disables the CEC hardware. Enabling the CEC hardware
+means powering it up in a state where no logical addresses are claimed. This
+op assumes that the physical address (adap->phys_addr) is valid when enable is
+true and will not change while the CEC adapter remains enabled. The initial
+state of the CEC adapter after calling cec_allocate_adapter() is disabled.
+
+Note that adap_enable must return 0 if enable is false.
+
+
+To enable/disable the 'monitor all' mode:
+
+.. c:function::
+	int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable);
+
+If enabled, then the adapter should be put in a mode to also monitor messages
+that not for us. Not all hardware supports this and this function is only
+called if the CEC_CAP_MONITOR_ALL capability is set. This callback is optional
+(some hardware may always be in 'monitor all' mode).
+
+Note that adap_monitor_all_enable must return 0 if enable is false.
+
+
+To enable/disable the 'monitor pin' mode:
+
+.. c:function::
+	int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable);
+
+If enabled, then the adapter should be put in a mode to also monitor CEC pin
+changes. Not all hardware supports this and this function is only called if
+the CEC_CAP_MONITOR_PIN capability is set. This callback is optional
+(some hardware may always be in 'monitor pin' mode).
+
+Note that adap_monitor_pin_enable must return 0 if enable is false.
+
+
+To program a new logical address:
+
+.. c:function::
+	int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
+
+If logical_addr == CEC_LOG_ADDR_INVALID then all programmed logical addresses
+are to be erased. Otherwise the given logical address should be programmed.
+If the maximum number of available logical addresses is exceeded, then it
+should return -ENXIO. Once a logical address is programmed the CEC hardware
+can receive directed messages to that address.
+
+Note that adap_log_addr must return 0 if logical_addr is CEC_LOG_ADDR_INVALID.
+
+
+To transmit a new message:
+
+.. c:function::
+	int (*adap_transmit)(struct cec_adapter *adap, u8 attempts,
+			     u32 signal_free_time, struct cec_msg *msg);
+
+This transmits a new message. The attempts argument is the suggested number of
+attempts for the transmit.
+
+The signal_free_time is the number of data bit periods that the adapter should
+wait when the line is free before attempting to send a message. This value
+depends on whether this transmit is a retry, a message from a new initiator or
+a new message for the same initiator. Most hardware will handle this
+automatically, but in some cases this information is needed.
+
+The CEC_FREE_TIME_TO_USEC macro can be used to convert signal_free_time to
+microseconds (one data bit period is 2.4 ms).
+
+
+To log the current CEC hardware status:
+
+.. c:function::
+	void (*adap_status)(struct cec_adapter *adap, struct seq_file *file);
+
+This optional callback can be used to show the status of the CEC hardware.
+The status is available through debugfs: cat /sys/kernel/debug/cec/cecX/status
+
+To free any resources when the adapter is deleted:
+
+.. c:function::
+	void (*adap_free)(struct cec_adapter *adap);
+
+This optional callback can be used to free any resources that might have been
+allocated by the driver. It's called from cec_delete_adapter.
+
+
+Your adapter driver will also have to react to events (typically interrupt
+driven) by calling into the framework in the following situations:
+
+When a transmit finished (successfully or otherwise):
+
+.. c:function::
+	void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt,
+		       u8 nack_cnt, u8 low_drive_cnt, u8 error_cnt);
+
+or:
+
+.. c:function::
+	void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status);
+
+The status can be one of:
+
+CEC_TX_STATUS_OK:
+	the transmit was successful.
+
+CEC_TX_STATUS_ARB_LOST:
+	arbitration was lost: another CEC initiator
+	took control of the CEC line and you lost the arbitration.
+
+CEC_TX_STATUS_NACK:
+	the message was nacked (for a directed message) or
+	acked (for a broadcast message). A retransmission is needed.
+
+CEC_TX_STATUS_LOW_DRIVE:
+	low drive was detected on the CEC bus. This indicates that
+	a follower detected an error on the bus and requested a
+	retransmission.
+
+CEC_TX_STATUS_ERROR:
+	some unspecified error occurred: this can be one of ARB_LOST
+	or LOW_DRIVE if the hardware cannot differentiate or something
+	else entirely. Some hardware only supports OK and FAIL as the
+	result of a transmit, i.e. there is no way to differentiate
+	between the different possible errors. In that case map FAIL
+	to CEC_TX_STATUS_NACK and not to CEC_TX_STATUS_ERROR.
+
+CEC_TX_STATUS_MAX_RETRIES:
+	could not transmit the message after trying multiple times.
+	Should only be set by the driver if it has hardware support for
+	retrying messages. If set, then the framework assumes that it
+	doesn't have to make another attempt to transmit the message
+	since the hardware did that already.
+
+The hardware must be able to differentiate between OK, NACK and 'something
+else'.
+
+The \*_cnt arguments are the number of error conditions that were seen.
+This may be 0 if no information is available. Drivers that do not support
+hardware retry can just set the counter corresponding to the transmit error
+to 1, if the hardware does support retry then either set these counters to
+0 if the hardware provides no feedback of which errors occurred and how many
+times, or fill in the correct values as reported by the hardware.
+
+Be aware that calling these functions can immediately start a new transmit
+if there is one pending in the queue. So make sure that the hardware is in
+a state where new transmits can be started *before* calling these functions.
+
+The cec_transmit_attempt_done() function is a helper for cases where the
+hardware never retries, so the transmit is always for just a single
+attempt. It will call cec_transmit_done() in turn, filling in 1 for the
+count argument corresponding to the status. Or all 0 if the status was OK.
+
+When a CEC message was received:
+
+.. c:function::
+	void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg);
+
+Speaks for itself.
+
+Implementing the interrupt handler
+----------------------------------
+
+Typically the CEC hardware provides interrupts that signal when a transmit
+finished and whether it was successful or not, and it provides and interrupt
+when a CEC message was received.
+
+The CEC driver should always process the transmit interrupts first before
+handling the receive interrupt. The framework expects to see the cec_transmit_done
+call before the cec_received_msg call, otherwise it can get confused if the
+received message was in reply to the transmitted message.
+
+Optional: Implementing Error Injection Support
+----------------------------------------------
+
+If the CEC adapter supports Error Injection functionality, then that can
+be exposed through the Error Injection callbacks:
+
+.. code-block:: none
+
+	struct cec_adap_ops {
+		/* Low-level callbacks */
+		...
+
+		/* Error injection callbacks */
+		int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf);
+		bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line);
+
+		/* High-level CEC message callback */
+		...
+	};
+
+If both callbacks are set, then an ``error-inj`` file will appear in debugfs.
+The basic syntax is as follows:
+
+Leading spaces/tabs are ignored. If the next character is a ``#`` or the end of the
+line was reached, then the whole line is ignored. Otherwise a command is expected.
+
+This basic parsing is done in the CEC Framework. It is up to the driver to decide
+what commands to implement. The only requirement is that the command ``clear`` without
+any arguments must be implemented and that it will remove all current error injection
+commands.
+
+This ensures that you can always do ``echo clear >error-inj`` to clear any error
+injections without having to know the details of the driver-specific commands.
+
+Note that the output of ``error-inj`` shall be valid as input to ``error-inj``.
+So this must work:
+
+.. code-block:: none
+
+	$ cat error-inj >einj.txt
+	$ cat einj.txt >error-inj
+
+The first callback is called when this file is read and it should show the
+the current error injection state:
+
+.. c:function::
+	int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf);
+
+It is recommended that it starts with a comment block with basic usage
+information. It returns 0 for success and an error otherwise.
+
+The second callback will parse commands written to the ``error-inj`` file:
+
+.. c:function::
+	bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line);
+
+The ``line`` argument points to the start of the command. Any leading
+spaces or tabs have already been skipped. It is a single line only (so there
+are no embedded newlines) and it is 0-terminated. The callback is free to
+modify the contents of the buffer. It is only called for lines containing a
+command, so this callback is never called for empty lines or comment lines.
+
+Return true if the command was valid or false if there were syntax errors.
+
+Implementing the High-Level CEC Adapter
+---------------------------------------
+
+The low-level operations drive the hardware, the high-level operations are
+CEC protocol driven. The following high-level callbacks are available:
+
+.. code-block:: none
+
+	struct cec_adap_ops {
+		/* Low-level callbacks */
+		...
+
+		/* Error injection callbacks */
+		...
+
+		/* High-level CEC message callback */
+		int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
+	};
+
+The received() callback allows the driver to optionally handle a newly
+received CEC message
+
+.. c:function::
+	int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
+
+If the driver wants to process a CEC message, then it can implement this
+callback. If it doesn't want to handle this message, then it should return
+-ENOMSG, otherwise the CEC framework assumes it processed this message and
+it will not do anything with it.
+
+
+CEC framework functions
+-----------------------
+
+CEC Adapter drivers can call the following CEC framework functions:
+
+.. c:function::
+	int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
+			     bool block);
+
+Transmit a CEC message. If block is true, then wait until the message has been
+transmitted, otherwise just queue it and return.
+
+.. c:function::
+	void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr,
+			     bool block);
+
+Change the physical address. This function will set adap->phys_addr and
+send an event if it has changed. If cec_s_log_addrs() has been called and
+the physical address has become valid, then the CEC framework will start
+claiming the logical addresses. If block is true, then this function won't
+return until this process has finished.
+
+When the physical address is set to a valid value the CEC adapter will
+be enabled (see the adap_enable op). When it is set to CEC_PHYS_ADDR_INVALID,
+then the CEC adapter will be disabled. If you change a valid physical address
+to another valid physical address, then this function will first set the
+address to CEC_PHYS_ADDR_INVALID before enabling the new physical address.
+
+.. c:function::
+	void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
+				       const struct edid *edid);
+
+A helper function that extracts the physical address from the edid struct
+and calls cec_s_phys_addr() with that address, or CEC_PHYS_ADDR_INVALID
+if the EDID did not contain a physical address or edid was a NULL pointer.
+
+.. c:function::
+	int cec_s_log_addrs(struct cec_adapter *adap,
+			    struct cec_log_addrs *log_addrs, bool block);
+
+Claim the CEC logical addresses. Should never be called if CEC_CAP_LOG_ADDRS
+is set. If block is true, then wait until the logical addresses have been
+claimed, otherwise just queue it and return. To unconfigure all logical
+addresses call this function with log_addrs set to NULL or with
+log_addrs->num_log_addrs set to 0. The block argument is ignored when
+unconfiguring. This function will just return if the physical address is
+invalid. Once the physical address becomes valid, then the framework will
+attempt to claim these logical addresses.
+
+CEC Pin framework
+-----------------
+
+Most CEC hardware operates on full CEC messages where the software provides
+the message and the hardware handles the low-level CEC protocol. But some
+hardware only drives the CEC pin and software has to handle the low-level
+CEC protocol. The CEC pin framework was created to handle such devices.
+
+Note that due to the close-to-realtime requirements it can never be guaranteed
+to work 100%. This framework uses highres timers internally, but if a
+timer goes off too late by more than 300 microseconds wrong results can
+occur. In reality it appears to be fairly reliable.
+
+One advantage of this low-level implementation is that it can be used as
+a cheap CEC analyser, especially if interrupts can be used to detect
+CEC pin transitions from low to high or vice versa.
+
+.. kernel-doc:: include/media/cec-pin.h
+
+CEC Notifier framework
+----------------------
+
+Most drm HDMI implementations have an integrated CEC implementation and no
+notifier support is needed. But some have independent CEC implementations
+that have their own driver. This could be an IP block for an SoC or a
+completely separate chip that deals with the CEC pin. For those cases a
+drm driver can install a notifier and use the notifier to inform the
+CEC driver about changes in the physical address.
+
+.. kernel-doc:: include/media/cec-notifier.h
diff --git a/Documentation/driver-api/media/csi2.rst b/Documentation/driver-api/media/csi2.rst
new file mode 100644
index 000000000000..e111ff7bfd3d
--- /dev/null
+++ b/Documentation/driver-api/media/csi2.rst
@@ -0,0 +1,85 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+MIPI CSI-2
+==========
+
+CSI-2 is a data bus intended for transferring images from cameras to
+the host SoC. It is defined by the `MIPI alliance`_.
+
+.. _`MIPI alliance`: http://www.mipi.org/
+
+Transmitter drivers
+-------------------
+
+CSI-2 transmitter, such as a sensor or a TV tuner, drivers need to
+provide the CSI-2 receiver with information on the CSI-2 bus
+configuration. These include the V4L2_CID_LINK_FREQ and
+V4L2_CID_PIXEL_RATE controls and
+(:c:type:`v4l2_subdev_video_ops`->s_stream() callback). These
+interface elements must be present on the sub-device represents the
+CSI-2 transmitter.
+
+The V4L2_CID_LINK_FREQ control is used to tell the receiver driver the
+frequency (and not the symbol rate) of the link. The
+V4L2_CID_PIXEL_RATE is may be used by the receiver to obtain the pixel
+rate the transmitter uses. The
+:c:type:`v4l2_subdev_video_ops`->s_stream() callback provides an
+ability to start and stop the stream.
+
+The value of the V4L2_CID_PIXEL_RATE is calculated as follows::
+
+	pixel_rate = link_freq * 2 * nr_of_lanes / bits_per_sample
+
+where
+
+.. list-table:: variables in pixel rate calculation
+   :header-rows: 1
+
+   * - variable or constant
+     - description
+   * - link_freq
+     - The value of the V4L2_CID_LINK_FREQ integer64 menu item.
+   * - nr_of_lanes
+     - Number of data lanes used on the CSI-2 link. This can
+       be obtained from the OF endpoint configuration.
+   * - 2
+     - Two bits are transferred per clock cycle per lane.
+   * - bits_per_sample
+     - Number of bits per sample.
+
+The transmitter drivers must, if possible, configure the CSI-2
+transmitter to *LP-11 mode* whenever the transmitter is powered on but
+not active, and maintain *LP-11 mode* until stream on. Only at stream
+on should the transmitter activate the clock on the clock lane and
+transition to *HS mode*.
+
+Some transmitters do this automatically but some have to be explicitly
+programmed to do so, and some are unable to do so altogether due to
+hardware constraints.
+
+Stopping the transmitter
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+A transmitter stops sending the stream of images as a result of
+calling the ``.s_stream()`` callback. Some transmitters may stop the
+stream at a frame boundary whereas others stop immediately,
+effectively leaving the current frame unfinished. The receiver driver
+should not make assumptions either way, but function properly in both
+cases.
+
+Receiver drivers
+----------------
+
+Before the receiver driver may enable the CSI-2 transmitter by using
+the :c:type:`v4l2_subdev_video_ops`->s_stream(), it must have powered
+the transmitter up by using the
+:c:type:`v4l2_subdev_core_ops`->s_power() callback. This may take
+place either indirectly by using :c:func:`v4l2_pipeline_pm_get` or
+directly.
+
+Formats
+-------
+
+The media bus pixel codes document parallel formats. Should the pixel data be
+transported over a serial bus, the media bus pixel code that describes a
+parallel format that transfers a sample on a single clock cycle is used.
diff --git a/Documentation/driver-api/media/drivers/bttv-devel.rst b/Documentation/driver-api/media/drivers/bttv-devel.rst
new file mode 100644
index 000000000000..c9aa8b95a5e5
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/bttv-devel.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The bttv driver
+===============
+
+bttv and sound mini howto
+-------------------------
+
+There are a lot of different bt848/849/878/879 based boards available.
+Making video work often is not a big deal, because this is handled
+completely by the bt8xx chip, which is common on all boards.  But
+sound is handled in slightly different ways on each board.
+
+To handle the grabber boards correctly, there is a array tvcards[] in
+bttv-cards.c, which holds the information required for each board.
+Sound will work only, if the correct entry is used (for video it often
+makes no difference).  The bttv driver prints a line to the kernel
+log, telling which card type is used.  Like this one::
+
+	bttv0: model: BT848(Hauppauge old) [autodetected]
+
+You should verify this is correct.  If it isn't, you have to pass the
+correct board type as insmod argument, ``insmod bttv card=2`` for
+example.  The file :doc:`/admin-guide/media/bttv-cardlist` has a list
+of valid arguments for card.
+
+If your card isn't listed there, you might check the source code for
+new entries which are not listed yet.  If there isn't one for your
+card, you can check if one of the existing entries does work for you
+(just trial and error...).
+
+Some boards have an extra processor for sound to do stereo decoding
+and other nice features.  The msp34xx chips are used by Hauppauge for
+example.  If your board has one, you might have to load a helper
+module like ``msp3400`` to make sound work.  If there isn't one for the
+chip used on your board:  Bad luck.  Start writing a new one.  Well,
+you might want to check the video4linux mailing list archive first...
+
+Of course you need a correctly installed soundcard unless you have the
+speakers connected directly to the grabber board.  Hint: check the
+mixer settings too.  ALSA for example has everything muted by default.
+
+
+How sound works in detail
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Still doesn't work?  Looks like some driver hacking is required.
+Below is a do-it-yourself description for you.
+
+The bt8xx chips have 32 general purpose pins, and registers to control
+these pins.  One register is the output enable register
+(``BT848_GPIO_OUT_EN``), it says which pins are actively driven by the
+bt848 chip.  Another one is the data register (``BT848_GPIO_DATA``), where
+you can get/set the status if these pins.  They can be used for input
+and output.
+
+Most grabber board vendors use these pins to control an external chip
+which does the sound routing.  But every board is a little different.
+These pins are also used by some companies to drive remote control
+receiver chips.  Some boards use the i2c bus instead of the gpio pins
+to connect the mux chip.
+
+As mentioned above, there is a array which holds the required
+information for each known board.  You basically have to create a new
+line for your board.  The important fields are these two::
+
+  struct tvcard
+  {
+	[ ... ]
+	u32 gpiomask;
+	u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
+  };
+
+gpiomask specifies which pins are used to control the audio mux chip.
+The corresponding bits in the output enable register
+(``BT848_GPIO_OUT_EN``) will be set as these pins must be driven by the
+bt848 chip.
+
+The ``audiomux[]`` array holds the data values for the different inputs
+(i.e. which pins must be high/low for tuner/mute/...).  This will be
+written to the data register (``BT848_GPIO_DATA``) to switch the audio
+mux.
+
+
+What you have to do is figure out the correct values for gpiomask and
+the audiomux array.  If you have Windows and the drivers four your
+card installed, you might to check out if you can read these registers
+values used by the windows driver.  A tool to do this is available
+from http://btwincap.sourceforge.net/download.html.
+
+You might also dig around in the ``*.ini`` files of the Windows applications.
+You can have a look at the board to see which of the gpio pins are
+connected at all and then start trial-and-error ...
+
+
+Starting with release 0.7.41 bttv has a number of insmod options to
+make the gpio debugging easier:
+
+	=================	==============================================
+	bttv_gpio=0/1		enable/disable gpio debug messages
+	gpiomask=n		set the gpiomask value
+	audiomux=i,j,...	set the values of the audiomux array
+	audioall=a		set the values of the audiomux array (one
+				value for all array elements, useful to check
+				out which effect the particular value has).
+	=================	==============================================
+
+The messages printed with ``bttv_gpio=1`` look like this::
+
+	bttv0: gpio: en=00000027, out=00000024 in=00ffffd8 [audio: off]
+
+	en  =	output _en_able register (BT848_GPIO_OUT_EN)
+	out =	_out_put bits of the data register (BT848_GPIO_DATA),
+		i.e. BT848_GPIO_DATA & BT848_GPIO_OUT_EN
+	in  = 	_in_put bits of the data register,
+		i.e. BT848_GPIO_DATA & ~BT848_GPIO_OUT_EN
diff --git a/Documentation/driver-api/media/drivers/contributors.rst b/Documentation/driver-api/media/drivers/contributors.rst
new file mode 100644
index 000000000000..f23b6e6faf46
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/contributors.rst
@@ -0,0 +1,131 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Contributors
+============
+
+.. note::
+
+   This documentation is outdated. There are several other DVB contributors
+   that aren't listed below.
+
+Thanks go to the following people for patches and contributions:
+
+- Michael Hunold <m.hunold@gmx.de>
+
+  - for the initial saa7146 driver and its recent overhaul
+
+- Christian Theiss
+
+  - for his work on the initial Linux DVB driver
+
+- Marcus Metzler <mocm@metzlerbros.de> and
+  Ralph Metzler <rjkm@metzlerbros.de>
+
+  - for their continuing work on the DVB driver
+
+- Michael Holzt <kju@debian.org>
+
+  - for his contributions to the dvb-net driver
+
+- Diego Picciani <d.picciani@novacomp.it>
+
+  - for CyberLogin for Linux which allows logging onto EON
+    (in case you are wondering where CyberLogin is, EON changed its login
+    procedure and CyberLogin is no longer used.)
+
+- Martin Schaller <martin@smurf.franken.de>
+
+  - for patching the cable card decoder driver
+
+- Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>
+
+  - for various fixes regarding tuning, OSD and CI stuff and his work on VDR
+
+- Steve Brown <sbrown@cortland.com>
+
+  - for his AFC kernel thread
+
+- Christoph Martin <martin@uni-mainz.de>
+
+  - for his LIRC infrared handler
+
+- Andreas Oberritter <obi@linuxtv.org>,
+  Dennis Noermann <dennis.noermann@noernet.de>,
+  Felix Domke <tmbinc@elitedvb.net>,
+  Florian Schirmer <jolt@tuxbox.org>,
+  Ronny Strutz <3des@elitedvb.de>,
+  Wolfram Joost <dbox2@frokaschwei.de>
+  and all the other dbox2 people
+
+  - for many bugfixes in the generic DVB Core, frontend drivers and
+    their work on the dbox2 port of the DVB driver
+
+- Oliver Endriss <o.endriss@gmx.de>
+
+  - for many bugfixes
+
+- Andrew de Quincey <adq_dvb@lidskialf.net>
+
+  - for the tda1004x frontend driver, and various bugfixes
+
+- Peter Schildmann <peter.schildmann@web.de>
+
+  - for the driver for the Technisat SkyStar2 PCI DVB card
+
+- Vadim Catana <skystar@moldova.cc>,
+  Roberto Ragusa <r.ragusa@libero.it> and
+  Augusto Cardoso <augusto@carhil.net>
+
+  - for all the work for the FlexCopII chipset by B2C2,Inc.
+
+- Davor Emard <emard@softhome.net>
+
+  - for his work on the budget drivers, the demux code,
+    the module unloading problems, ...
+
+- Hans-Frieder Vogt <hfvogt@arcor.de>
+
+  - for his work on calculating and checking the crc's for the
+    TechnoTrend/Hauppauge DEC driver firmware
+
+- Michael Dreher <michael@5dot1.de> and
+  Andreas 'randy' Weinberger
+
+  - for the support of the Fujitsu-Siemens Activy budget DVB-S
+
+- Kenneth Aafløy <ke-aa@frisurf.no>
+
+  - for adding support for Typhoon DVB-S budget card
+
+- Ernst Peinlich <e.peinlich@inode.at>
+
+  - for tuning/DiSEqC support for the DEC 3000-s
+
+- Peter Beutner <p.beutner@gmx.net>
+
+  - for the IR code for the ttusb-dec driver
+
+- Wilson Michaels <wilsonmichaels@earthlink.net>
+
+  - for the lgdt330x frontend driver, and various bugfixes
+
+- Michael Krufky <mkrufky@linuxtv.org>
+
+  - for maintaining v4l/dvb inter-tree dependencies
+
+- Taylor Jacob <rtjacob@earthlink.net>
+
+  - for the nxt2002 frontend driver
+
+- Jean-Francois Thibert <jeanfrancois@sagetv.com>
+
+  - for the nxt2004 frontend driver
+
+- Kirk Lapray <kirk.lapray@gmail.com>
+
+  - for the or51211 and or51132 frontend drivers, and
+    for merging the nxt2002 and nxt2004 modules into a
+    single nxt200x frontend driver.
+
+(If you think you should be in this list, but you are not, drop a
+line to the DVB mailing list)
diff --git a/Documentation/driver-api/media/drivers/cpia2_devel.rst b/Documentation/driver-api/media/drivers/cpia2_devel.rst
new file mode 100644
index 000000000000..decaa4768c78
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/cpia2_devel.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The cpia2 driver
+================
+
+Authors: Peter Pregler <Peter_Pregler@email.com>,
+Scott J. Bertin <scottbertin@yahoo.com>, and
+Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which
+this one was modelled from.
+
+
+Notes to developers
+~~~~~~~~~~~~~~~~~~~
+
+   - This is a driver version stripped of the 2.4 back compatibility
+     and old MJPEG ioctl API. See cpia2.sf.net for 2.4 support.
+
+Programmer's overview of cpia2 driver
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Cpia2 is the second generation video coprocessor from VLSI Vision Ltd (now a
+division of ST Microelectronics).  There are two versions.  The first is the
+STV0672, which is capable of up to 30 frames per second (fps) in frame sizes
+up to CIF, and 15 fps for VGA frames.  The STV0676 is an improved version,
+which can handle up to 30 fps VGA.  Both coprocessors can be attached to two
+CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor.  These will
+be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors.
+
+The two chipsets operate almost identically.  The core is an 8051 processor,
+running two different versions of firmware.  The 672 runs the VP4 video
+processor code, the 676 runs VP5.  There are a few differences in register
+mappings for the two chips.  In these cases, the symbols defined in the
+header files are marked with VP4 or VP5 as part of the symbol name.
+
+The cameras appear externally as three sets of registers. Setting register
+values is the only way to control the camera.  Some settings are
+interdependant, such as the sequence required to power up the camera. I will
+try to make note of all of these cases.
+
+The register sets are called blocks.  Block 0 is the system block.  This
+section is always powered on when the camera is plugged in.  It contains
+registers that control housekeeping functions such as powering up the video
+processor.  The video processor is the VP block.  These registers control
+how the video from the sensor is processed.  Examples are timing registers,
+user mode (vga, qvga), scaling, cropping, framerates, and so on.  The last
+block is the video compressor (VC).  The video stream sent from the camera is
+compressed as Motion JPEG (JPEGA).  The VC controls all of the compression
+parameters.  Looking at the file cpia2_registers.h, you can get a full view
+of these registers and the possible values for most of them.
+
+One or more registers can be set or read by sending a usb control message to
+the camera.  There are three modes for this.  Block mode requests a number
+of contiguous registers.  Random mode reads or writes random registers with
+a tuple structure containing address/value pairs.  The repeat mode is only
+used by VP4 to load a firmware patch.  It contains a starting address and
+a sequence of bytes to be written into a gpio port.
diff --git a/Documentation/driver-api/media/drivers/cx2341x-devel.rst b/Documentation/driver-api/media/drivers/cx2341x-devel.rst
new file mode 100644
index 000000000000..97699df6ea2e
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/cx2341x-devel.rst
@@ -0,0 +1,3685 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The cx2341x driver
+==================
+
+Memory at cx2341x chips
+-----------------------
+
+This section describes the cx2341x memory map and documents some of the
+register space.
+
+.. note:: the memory long words are little-endian ('intel format').
+
+.. warning::
+
+	This information was figured out from searching through the memory
+	and registers, this information may not be correct and is certainly
+	not complete, and was not derived from anything more than searching
+	through the memory space with commands like:
+
+	.. code-block:: none
+
+		ivtvctl -O min=0x02000000,max=0x020000ff
+
+	So take this as is, I'm always searching for more stuff, it's a large
+	register space :-).
+
+Memory Map
+~~~~~~~~~~
+
+The cx2341x exposes its entire 64M memory space to the PCI host via the PCI BAR0
+(Base Address Register 0). The addresses here are offsets relative to the
+address held in BAR0.
+
+.. code-block:: none
+
+	0x00000000-0x00ffffff Encoder memory space
+	0x00000000-0x0003ffff Encode.rom
+	???-???         MPEG buffer(s)
+	???-???         Raw video capture buffer(s)
+	???-???         Raw audio capture buffer(s)
+	???-???         Display buffers (6 or 9)
+
+	0x01000000-0x01ffffff Decoder memory space
+	0x01000000-0x0103ffff Decode.rom
+	???-???         MPEG buffers(s)
+	0x0114b000-0x0115afff Audio.rom (deprecated?)
+
+	0x02000000-0x0200ffff Register Space
+
+Registers
+~~~~~~~~~
+
+The registers occupy the 64k space starting at the 0x02000000 offset from BAR0.
+All of these registers are 32 bits wide.
+
+.. code-block:: none
+
+	DMA Registers 0x000-0xff:
+
+	0x00 - Control:
+		0=reset/cancel, 1=read, 2=write, 4=stop
+	0x04 - DMA status:
+		1=read busy, 2=write busy, 4=read error, 8=write error, 16=link list error
+	0x08 - pci DMA pointer for read link list
+	0x0c - pci DMA pointer for write link list
+	0x10 - read/write DMA enable:
+		1=read enable, 2=write enable
+	0x14 - always 0xffffffff, if set any lower instability occurs, 0x00 crashes
+	0x18 - ??
+	0x1c - always 0x20 or 32, smaller values slow down DMA transactions
+	0x20 - always value of 0x780a010a
+	0x24-0x3c - usually just random values???
+	0x40 - Interrupt status
+	0x44 - Write a bit here and shows up in Interrupt status 0x40
+	0x48 - Interrupt Mask
+	0x4C - always value of 0xfffdffff,
+		if changed to 0xffffffff DMA write interrupts break.
+	0x50 - always 0xffffffff
+	0x54 - always 0xffffffff (0x4c, 0x50, 0x54 seem like interrupt masks, are
+		3 processors on chip, Java ones, VPU, SPU, APU, maybe these are the
+		interrupt masks???).
+	0x60-0x7C - random values
+	0x80 - first write linked list reg, for Encoder Memory addr
+	0x84 - first write linked list reg, for pci memory addr
+	0x88 - first write linked list reg, for length of buffer in memory addr
+		(|0x80000000 or this for last link)
+	0x8c-0xdc - rest of write linked list reg, 8 sets of 3 total, DMA goes here
+		from linked list addr in reg 0x0c, firmware must push through or
+		something.
+	0xe0 - first (and only) read linked list reg, for pci memory addr
+	0xe4 - first (and only) read linked list reg, for Decoder memory addr
+	0xe8 - first (and only) read linked list reg, for length of buffer
+	0xec-0xff - Nothing seems to be in these registers, 0xec-f4 are 0x00000000.
+
+Memory locations for Encoder Buffers 0x700-0x7ff:
+
+These registers show offsets of memory locations pertaining to each
+buffer area used for encoding, have to shift them by <<1 first.
+
+- 0x07F8: Encoder SDRAM refresh
+- 0x07FC: Encoder SDRAM pre-charge
+
+Memory locations for Decoder Buffers 0x800-0x8ff:
+
+These registers show offsets of memory locations pertaining to each
+buffer area used for decoding, have to shift them by <<1 first.
+
+- 0x08F8: Decoder SDRAM refresh
+- 0x08FC: Decoder SDRAM pre-charge
+
+Other memory locations:
+
+- 0x2800: Video Display Module control
+- 0x2D00: AO (audio output?) control
+- 0x2D24: Bytes Flushed
+- 0x7000: LSB I2C write clock bit (inverted)
+- 0x7004: LSB I2C write data bit (inverted)
+- 0x7008: LSB I2C read clock bit
+- 0x700c: LSB I2C read data bit
+- 0x9008: GPIO get input state
+- 0x900c: GPIO set output state
+- 0x9020: GPIO direction (Bit7 (GPIO 0..7) - 0:input, 1:output)
+- 0x9050: SPU control
+- 0x9054: Reset HW blocks
+- 0x9058: VPU control
+- 0xA018: Bit6: interrupt pending?
+- 0xA064: APU command
+
+
+Interrupt Status Register
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The definition of the bits in the interrupt status register 0x0040, and the
+interrupt mask 0x0048. If a bit is cleared in the mask, then we want our ISR to
+execute.
+
+- bit 31 Encoder Start Capture
+- bit 30 Encoder EOS
+- bit 29 Encoder VBI capture
+- bit 28 Encoder Video Input Module reset event
+- bit 27 Encoder DMA complete
+- bit 24 Decoder audio mode change detection event (through event notification)
+- bit 22 Decoder data request
+- bit 20 Decoder DMA complete
+- bit 19 Decoder VBI re-insertion
+- bit 18 Decoder DMA err (linked-list bad)
+
+Missing documentation
+---------------------
+
+- Encoder API post(?)
+- Decoder API post(?)
+- Decoder VTRACE event
+
+
+The cx2341x firmware upload
+---------------------------
+
+This document describes how to upload the cx2341x firmware to the card.
+
+How to find
+~~~~~~~~~~~
+
+See the web pages of the various projects that uses this chip for information
+on how to obtain the firmware.
+
+The firmware stored in a Windows driver can be detected as follows:
+
+- Each firmware image is 256k bytes.
+- The 1st 32-bit word of the Encoder image is 0x0000da7
+- The 1st 32-bit word of the Decoder image is 0x00003a7
+- The 2nd 32-bit word of both images is 0xaa55bb66
+
+How to load
+~~~~~~~~~~~
+
+- Issue the FWapi command to stop the encoder if it is running. Wait for the
+  command to complete.
+- Issue the FWapi command to stop the decoder if it is running. Wait for the
+  command to complete.
+- Issue the I2C command to the digitizer to stop emitting VSYNC events.
+- Issue the FWapi command to halt the encoder's firmware.
+- Sleep for 10ms.
+- Issue the FWapi command to halt the decoder's firmware.
+- Sleep for 10ms.
+- Write 0x00000000 to register 0x2800 to stop the Video Display Module.
+- Write 0x00000005 to register 0x2D00 to stop the AO (audio output?).
+- Write 0x00000000 to register 0xA064 to ping? the APU.
+- Write 0xFFFFFFFE to register 0x9058 to stop the VPU.
+- Write 0xFFFFFFFF to register 0x9054 to reset the HW blocks.
+- Write 0x00000001 to register 0x9050 to stop the SPU.
+- Sleep for 10ms.
+- Write 0x0000001A to register 0x07FC to init the Encoder SDRAM's pre-charge.
+- Write 0x80000640 to register 0x07F8 to init the Encoder SDRAM's refresh to 1us.
+- Write 0x0000001A to register 0x08FC to init the Decoder SDRAM's pre-charge.
+- Write 0x80000640 to register 0x08F8 to init the Decoder SDRAM's refresh to 1us.
+- Sleep for 512ms. (600ms is recommended)
+- Transfer the encoder's firmware image to offset 0 in Encoder memory space.
+- Transfer the decoder's firmware image to offset 0 in Decoder memory space.
+- Use a read-modify-write operation to Clear bit 0 of register 0x9050 to
+  re-enable the SPU.
+- Sleep for 1 second.
+- Use a read-modify-write operation to Clear bits 3 and 0 of register 0x9058
+  to re-enable the VPU.
+- Sleep for 1 second.
+- Issue status API commands to both firmware images to verify.
+
+
+How to call the firmware API
+----------------------------
+
+The preferred calling convention is known as the firmware mailbox. The
+mailboxes are basically a fixed length array that serves as the call-stack.
+
+Firmware mailboxes can be located by searching the encoder and decoder memory
+for a 16 byte signature. That signature will be located on a 256-byte boundary.
+
+Signature:
+
+.. code-block:: none
+
+	0x78, 0x56, 0x34, 0x12, 0x12, 0x78, 0x56, 0x34,
+	0x34, 0x12, 0x78, 0x56, 0x56, 0x34, 0x12, 0x78
+
+The firmware implements 20 mailboxes of 20 32-bit words. The first 10 are
+reserved for API calls. The second 10 are used by the firmware for event
+notification.
+
+  ====== =================
+  Index  Name
+  ====== =================
+  0      Flags
+  1      Command
+  2      Return value
+  3      Timeout
+  4-19   Parameter/Result
+  ====== =================
+
+
+The flags are defined in the following table. The direction is from the
+perspective of the firmware.
+
+  ==== ========== ============================================
+  Bit  Direction  Purpose
+  ==== ========== ============================================
+  2    O          Firmware has processed the command.
+  1    I          Driver has finished setting the parameters.
+  0    I          Driver is using this mailbox.
+  ==== ========== ============================================
+
+The command is a 32-bit enumerator. The API specifics may be found in this
+chapter.
+
+The return value is a 32-bit enumerator. Only two values are currently defined:
+
+- 0=success
+- -1=command undefined.
+
+There are 16 parameters/results 32-bit fields. The driver populates these fields
+with values for all the parameters required by the call. The driver overwrites
+these fields with result values returned by the call.
+
+The timeout value protects the card from a hung driver thread. If the driver
+doesn't handle the completed call within the timeout specified, the firmware
+will reset that mailbox.
+
+To make an API call, the driver iterates over each mailbox looking for the
+first one available (bit 0 has been cleared). The driver sets that bit, fills
+in the command enumerator, the timeout value and any required parameters. The
+driver then sets the parameter ready bit (bit 1). The firmware scans the
+mailboxes for pending commands, processes them, sets the result code, populates
+the result value array with that call's return values and sets the call
+complete bit (bit 2). Once bit 2 is set, the driver should retrieve the results
+and clear all the flags. If the driver does not perform this task within the
+time set in the timeout register, the firmware will reset that mailbox.
+
+Event notifications are sent from the firmware to the host. The host tells the
+firmware which events it is interested in via an API call. That call tells the
+firmware which notification mailbox to use. The firmware signals the host via
+an interrupt. Only the 16 Results fields are used, the Flags, Command, Return
+value and Timeout words are not used.
+
+
+OSD firmware API description
+----------------------------
+
+.. note:: this API is part of the decoder firmware, so it's cx23415 only.
+
+
+
+CX2341X_OSD_GET_FRAMEBUFFER
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 65/0x41
+
+Description
+^^^^^^^^^^^
+
+Return base and length of contiguous OSD memory.
+
+Result[0]
+^^^^^^^^^
+
+OSD base address
+
+Result[1]
+^^^^^^^^^
+
+OSD length
+
+
+
+CX2341X_OSD_GET_PIXEL_FORMAT
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 66/0x42
+
+Description
+^^^^^^^^^^^
+
+Query OSD format
+
+Result[0]
+^^^^^^^^^
+
+0=8bit index
+1=16bit RGB 5:6:5
+2=16bit ARGB 1:5:5:5
+3=16bit ARGB 1:4:4:4
+4=32bit ARGB 8:8:8:8
+
+
+
+CX2341X_OSD_SET_PIXEL_FORMAT
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 67/0x43
+
+Description
+^^^^^^^^^^^
+
+Assign pixel format
+
+Param[0]
+^^^^^^^^
+
+- 0=8bit index
+- 1=16bit RGB 5:6:5
+- 2=16bit ARGB 1:5:5:5
+- 3=16bit ARGB 1:4:4:4
+- 4=32bit ARGB 8:8:8:8
+
+
+
+CX2341X_OSD_GET_STATE
+~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 68/0x44
+
+Description
+^^^^^^^^^^^
+
+Query OSD state
+
+Result[0]
+^^^^^^^^^
+
+- Bit  0   0=off, 1=on
+- Bits 1:2 alpha control
+- Bits 3:5 pixel format
+
+
+
+CX2341X_OSD_SET_STATE
+~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 69/0x45
+
+Description
+^^^^^^^^^^^
+
+OSD switch
+
+Param[0]
+^^^^^^^^
+
+0=off, 1=on
+
+
+
+CX2341X_OSD_GET_OSD_COORDS
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 70/0x46
+
+Description
+^^^^^^^^^^^
+
+Retrieve coordinates of OSD area blended with video
+
+Result[0]
+^^^^^^^^^
+
+OSD buffer address
+
+Result[1]
+^^^^^^^^^
+
+Stride in pixels
+
+Result[2]
+^^^^^^^^^
+
+Lines in OSD buffer
+
+Result[3]
+^^^^^^^^^
+
+Horizontal offset in buffer
+
+Result[4]
+^^^^^^^^^
+
+Vertical offset in buffer
+
+
+
+CX2341X_OSD_SET_OSD_COORDS
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 71/0x47
+
+Description
+^^^^^^^^^^^
+
+Assign the coordinates of the OSD area to blend with video
+
+Param[0]
+^^^^^^^^
+
+buffer address
+
+Param[1]
+^^^^^^^^
+
+buffer stride in pixels
+
+Param[2]
+^^^^^^^^
+
+lines in buffer
+
+Param[3]
+^^^^^^^^
+
+horizontal offset
+
+Param[4]
+^^^^^^^^
+
+vertical offset
+
+
+
+CX2341X_OSD_GET_SCREEN_COORDS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 72/0x48
+
+Description
+^^^^^^^^^^^
+
+Retrieve OSD screen area coordinates
+
+Result[0]
+^^^^^^^^^
+
+top left horizontal offset
+
+Result[1]
+^^^^^^^^^
+
+top left vertical offset
+
+Result[2]
+^^^^^^^^^
+
+bottom right horizontal offset
+
+Result[3]
+^^^^^^^^^
+
+bottom right vertical offset
+
+
+
+CX2341X_OSD_SET_SCREEN_COORDS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 73/0x49
+
+Description
+^^^^^^^^^^^
+
+Assign the coordinates of the screen area to blend with video
+
+Param[0]
+^^^^^^^^
+
+top left horizontal offset
+
+Param[1]
+^^^^^^^^
+
+top left vertical offset
+
+Param[2]
+^^^^^^^^
+
+bottom left horizontal offset
+
+Param[3]
+^^^^^^^^
+
+bottom left vertical offset
+
+
+
+CX2341X_OSD_GET_GLOBAL_ALPHA
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 74/0x4A
+
+Description
+^^^^^^^^^^^
+
+Retrieve OSD global alpha
+
+Result[0]
+^^^^^^^^^
+
+global alpha: 0=off, 1=on
+
+Result[1]
+^^^^^^^^^
+
+bits 0:7 global alpha
+
+
+
+CX2341X_OSD_SET_GLOBAL_ALPHA
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 75/0x4B
+
+Description
+^^^^^^^^^^^
+
+Update global alpha
+
+Param[0]
+^^^^^^^^
+
+global alpha: 0=off, 1=on
+
+Param[1]
+^^^^^^^^
+
+global alpha (8 bits)
+
+Param[2]
+^^^^^^^^
+
+local alpha: 0=on, 1=off
+
+
+
+CX2341X_OSD_SET_BLEND_COORDS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 78/0x4C
+
+Description
+^^^^^^^^^^^
+
+Move start of blending area within display buffer
+
+Param[0]
+^^^^^^^^
+
+horizontal offset in buffer
+
+Param[1]
+^^^^^^^^
+
+vertical offset in buffer
+
+
+
+CX2341X_OSD_GET_FLICKER_STATE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 79/0x4F
+
+Description
+^^^^^^^^^^^
+
+Retrieve flicker reduction module state
+
+Result[0]
+^^^^^^^^^
+
+flicker state: 0=off, 1=on
+
+
+
+CX2341X_OSD_SET_FLICKER_STATE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 80/0x50
+
+Description
+^^^^^^^^^^^
+
+Set flicker reduction module state
+
+Param[0]
+^^^^^^^^
+
+State: 0=off, 1=on
+
+
+
+CX2341X_OSD_BLT_COPY
+~~~~~~~~~~~~~~~~~~~~
+
+Enum: 82/0x52
+
+Description
+^^^^^^^^^^^
+
+BLT copy
+
+Param[0]
+^^^^^^^^
+
+.. code-block:: none
+
+	'0000'  zero
+	'0001' ~destination AND ~source
+	'0010' ~destination AND  source
+	'0011' ~destination
+	'0100'  destination AND ~source
+	'0101'                  ~source
+	'0110'  destination XOR  source
+	'0111' ~destination OR  ~source
+	'1000' ~destination AND ~source
+	'1001'  destination XNOR source
+	'1010'                   source
+	'1011' ~destination OR   source
+	'1100'  destination
+	'1101'  destination OR  ~source
+	'1110'  destination OR   source
+	'1111'  one
+
+
+Param[1]
+^^^^^^^^
+
+Resulting alpha blending
+
+- '01' source_alpha
+- '10' destination_alpha
+- '11' source_alpha*destination_alpha+1
+  (zero if both source and destination alpha are zero)
+
+Param[2]
+^^^^^^^^
+
+.. code-block:: none
+
+	'00' output_pixel = source_pixel
+
+	'01' if source_alpha=0:
+		 output_pixel = destination_pixel
+	     if 256 > source_alpha > 1:
+		 output_pixel = ((source_alpha + 1)*source_pixel +
+				 (255 - source_alpha)*destination_pixel)/256
+
+	'10' if destination_alpha=0:
+		 output_pixel = source_pixel
+	      if 255 > destination_alpha > 0:
+		 output_pixel = ((255 - destination_alpha)*source_pixel +
+				 (destination_alpha + 1)*destination_pixel)/256
+
+	'11' if source_alpha=0:
+		 source_temp = 0
+	     if source_alpha=255:
+		 source_temp = source_pixel*256
+	     if 255 > source_alpha > 0:
+		 source_temp = source_pixel*(source_alpha + 1)
+	     if destination_alpha=0:
+		 destination_temp = 0
+	     if destination_alpha=255:
+		 destination_temp = destination_pixel*256
+	     if 255 > destination_alpha > 0:
+		 destination_temp = destination_pixel*(destination_alpha + 1)
+	     output_pixel = (source_temp + destination_temp)/256
+
+Param[3]
+^^^^^^^^
+
+width
+
+Param[4]
+^^^^^^^^
+
+height
+
+Param[5]
+^^^^^^^^
+
+destination pixel mask
+
+Param[6]
+^^^^^^^^
+
+destination rectangle start address
+
+Param[7]
+^^^^^^^^
+
+destination stride in dwords
+
+Param[8]
+^^^^^^^^
+
+source stride in dwords
+
+Param[9]
+^^^^^^^^
+
+source rectangle start address
+
+
+
+CX2341X_OSD_BLT_FILL
+~~~~~~~~~~~~~~~~~~~~
+
+Enum: 83/0x53
+
+Description
+^^^^^^^^^^^
+
+BLT fill color
+
+Param[0]
+^^^^^^^^
+
+Same as Param[0] on API 0x52
+
+Param[1]
+^^^^^^^^
+
+Same as Param[1] on API 0x52
+
+Param[2]
+^^^^^^^^
+
+Same as Param[2] on API 0x52
+
+Param[3]
+^^^^^^^^
+
+width
+
+Param[4]
+^^^^^^^^
+
+height
+
+Param[5]
+^^^^^^^^
+
+destination pixel mask
+
+Param[6]
+^^^^^^^^
+
+destination rectangle start address
+
+Param[7]
+^^^^^^^^
+
+destination stride in dwords
+
+Param[8]
+^^^^^^^^
+
+color fill value
+
+
+
+CX2341X_OSD_BLT_TEXT
+~~~~~~~~~~~~~~~~~~~~
+
+Enum: 84/0x54
+
+Description
+^^^^^^^^^^^
+
+BLT for 8 bit alpha text source
+
+Param[0]
+^^^^^^^^
+
+Same as Param[0] on API 0x52
+
+Param[1]
+^^^^^^^^
+
+Same as Param[1] on API 0x52
+
+Param[2]
+^^^^^^^^
+
+Same as Param[2] on API 0x52
+
+Param[3]
+^^^^^^^^
+
+width
+
+Param[4]
+^^^^^^^^
+
+height
+
+Param[5]
+^^^^^^^^
+
+destination pixel mask
+
+Param[6]
+^^^^^^^^
+
+destination rectangle start address
+
+Param[7]
+^^^^^^^^
+
+destination stride in dwords
+
+Param[8]
+^^^^^^^^
+
+source stride in dwords
+
+Param[9]
+^^^^^^^^
+
+source rectangle start address
+
+Param[10]
+^^^^^^^^^
+
+color fill value
+
+
+
+CX2341X_OSD_SET_FRAMEBUFFER_WINDOW
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 86/0x56
+
+Description
+^^^^^^^^^^^
+
+Positions the main output window on the screen. The coordinates must be
+such that the entire window fits on the screen.
+
+Param[0]
+^^^^^^^^
+
+window width
+
+Param[1]
+^^^^^^^^
+
+window height
+
+Param[2]
+^^^^^^^^
+
+top left window corner horizontal offset
+
+Param[3]
+^^^^^^^^
+
+top left window corner vertical offset
+
+
+
+CX2341X_OSD_SET_CHROMA_KEY
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 96/0x60
+
+Description
+^^^^^^^^^^^
+
+Chroma key switch and color
+
+Param[0]
+^^^^^^^^
+
+state: 0=off, 1=on
+
+Param[1]
+^^^^^^^^
+
+color
+
+
+
+CX2341X_OSD_GET_ALPHA_CONTENT_INDEX
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 97/0x61
+
+Description
+^^^^^^^^^^^
+
+Retrieve alpha content index
+
+Result[0]
+^^^^^^^^^
+
+alpha content index, Range 0:15
+
+
+
+CX2341X_OSD_SET_ALPHA_CONTENT_INDEX
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 98/0x62
+
+Description
+^^^^^^^^^^^
+
+Assign alpha content index
+
+Param[0]
+^^^^^^^^
+
+alpha content index, range 0:15
+
+
+Encoder firmware API description
+--------------------------------
+
+CX2341X_ENC_PING_FW
+~~~~~~~~~~~~~~~~~~~
+
+Enum: 128/0x80
+
+Description
+^^^^^^^^^^^
+
+Does nothing. Can be used to check if the firmware is responding.
+
+
+
+CX2341X_ENC_START_CAPTURE
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 129/0x81
+
+Description
+^^^^^^^^^^^
+
+Commences the capture of video, audio and/or VBI data. All encoding
+parameters must be initialized prior to this API call. Captures frames
+continuously or until a predefined number of frames have been captured.
+
+Param[0]
+^^^^^^^^
+
+Capture stream type:
+
+	- 0=MPEG
+	- 1=Raw
+	- 2=Raw passthrough
+	- 3=VBI
+
+
+Param[1]
+^^^^^^^^
+
+Bitmask:
+
+	- Bit 0 when set, captures YUV
+	- Bit 1 when set, captures PCM audio
+	- Bit 2 when set, captures VBI (same as param[0]=3)
+	- Bit 3 when set, the capture destination is the decoder
+	  (same as param[0]=2)
+	- Bit 4 when set, the capture destination is the host
+
+.. note:: this parameter is only meaningful for RAW capture type.
+
+
+
+CX2341X_ENC_STOP_CAPTURE
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 130/0x82
+
+Description
+^^^^^^^^^^^
+
+Ends a capture in progress
+
+Param[0]
+^^^^^^^^
+
+- 0=stop at end of GOP (generates IRQ)
+- 1=stop immediate (no IRQ)
+
+Param[1]
+^^^^^^^^
+
+Stream type to stop, see param[0] of API 0x81
+
+Param[2]
+^^^^^^^^
+
+Subtype, see param[1] of API 0x81
+
+
+
+CX2341X_ENC_SET_AUDIO_ID
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 137/0x89
+
+Description
+^^^^^^^^^^^
+
+Assigns the transport stream ID of the encoded audio stream
+
+Param[0]
+^^^^^^^^
+
+Audio Stream ID
+
+
+
+CX2341X_ENC_SET_VIDEO_ID
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 139/0x8B
+
+Description
+^^^^^^^^^^^
+
+Set video transport stream ID
+
+Param[0]
+^^^^^^^^
+
+Video stream ID
+
+
+
+CX2341X_ENC_SET_PCR_ID
+~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 141/0x8D
+
+Description
+^^^^^^^^^^^
+
+Assigns the transport stream ID for PCR packets
+
+Param[0]
+^^^^^^^^
+
+PCR Stream ID
+
+
+
+CX2341X_ENC_SET_FRAME_RATE
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 143/0x8F
+
+Description
+^^^^^^^^^^^
+
+Set video frames per second. Change occurs at start of new GOP.
+
+Param[0]
+^^^^^^^^
+
+- 0=30fps
+- 1=25fps
+
+
+
+CX2341X_ENC_SET_FRAME_SIZE
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 145/0x91
+
+Description
+^^^^^^^^^^^
+
+Select video stream encoding resolution.
+
+Param[0]
+^^^^^^^^
+
+Height in lines. Default 480
+
+Param[1]
+^^^^^^^^
+
+Width in pixels. Default 720
+
+
+
+CX2341X_ENC_SET_BIT_RATE
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 149/0x95
+
+Description
+^^^^^^^^^^^
+
+Assign average video stream bitrate.
+
+Param[0]
+^^^^^^^^
+
+0=variable bitrate, 1=constant bitrate
+
+Param[1]
+^^^^^^^^
+
+bitrate in bits per second
+
+Param[2]
+^^^^^^^^
+
+peak bitrate in bits per second, divided by 400
+
+Param[3]
+^^^^^^^^
+
+Mux bitrate in bits per second, divided by 400. May be 0 (default).
+
+Param[4]
+^^^^^^^^
+
+Rate Control VBR Padding
+
+Param[5]
+^^^^^^^^
+
+VBV Buffer used by encoder
+
+.. note::
+
+	#) Param\[3\] and Param\[4\] seem to be always 0
+	#) Param\[5\] doesn't seem to be used.
+
+
+
+CX2341X_ENC_SET_GOP_PROPERTIES
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 151/0x97
+
+Description
+^^^^^^^^^^^
+
+Setup the GOP structure
+
+Param[0]
+^^^^^^^^
+
+GOP size (maximum is 34)
+
+Param[1]
+^^^^^^^^
+
+Number of B frames between the I and P frame, plus 1.
+For example: IBBPBBPBBPBB --> GOP size: 12, number of B frames: 2+1 = 3
+
+.. note::
+
+	GOP size must be a multiple of (B-frames + 1).
+
+
+
+CX2341X_ENC_SET_ASPECT_RATIO
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 153/0x99
+
+Description
+^^^^^^^^^^^
+
+Sets the encoding aspect ratio. Changes in the aspect ratio take effect
+at the start of the next GOP.
+
+Param[0]
+^^^^^^^^
+
+- '0000' forbidden
+- '0001' 1:1 square
+- '0010' 4:3
+- '0011' 16:9
+- '0100' 2.21:1
+- '0101' to '1111' reserved
+
+
+
+CX2341X_ENC_SET_DNR_FILTER_MODE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 155/0x9B
+
+Description
+^^^^^^^^^^^
+
+Assign Dynamic Noise Reduction operating mode
+
+Param[0]
+^^^^^^^^
+
+Bit0: Spatial filter, set=auto, clear=manual
+Bit1: Temporal filter, set=auto, clear=manual
+
+Param[1]
+^^^^^^^^
+
+Median filter:
+
+- 0=Disabled
+- 1=Horizontal
+- 2=Vertical
+- 3=Horiz/Vert
+- 4=Diagonal
+
+
+
+CX2341X_ENC_SET_DNR_FILTER_PROPS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 157/0x9D
+
+Description
+^^^^^^^^^^^
+
+These Dynamic Noise Reduction filter values are only meaningful when
+the respective filter is set to "manual" (See API 0x9B)
+
+Param[0]
+^^^^^^^^
+
+Spatial filter: default 0, range 0:15
+
+Param[1]
+^^^^^^^^
+
+Temporal filter: default 0, range 0:31
+
+
+
+CX2341X_ENC_SET_CORING_LEVELS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 159/0x9F
+
+Description
+^^^^^^^^^^^
+
+Assign Dynamic Noise Reduction median filter properties.
+
+Param[0]
+^^^^^^^^
+
+Threshold above which the luminance median filter is enabled.
+Default: 0, range 0:255
+
+Param[1]
+^^^^^^^^
+
+Threshold below which the luminance median filter is enabled.
+Default: 255, range 0:255
+
+Param[2]
+^^^^^^^^
+
+Threshold above which the chrominance median filter is enabled.
+Default: 0, range 0:255
+
+Param[3]
+^^^^^^^^
+
+Threshold below which the chrominance median filter is enabled.
+Default: 255, range 0:255
+
+
+
+CX2341X_ENC_SET_SPATIAL_FILTER_TYPE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 161/0xA1
+
+Description
+^^^^^^^^^^^
+
+Assign spatial prefilter parameters
+
+Param[0]
+^^^^^^^^
+
+Luminance filter
+
+- 0=Off
+- 1=1D Horizontal
+- 2=1D Vertical
+- 3=2D H/V Separable (default)
+- 4=2D Symmetric non-separable
+
+Param[1]
+^^^^^^^^
+
+Chrominance filter
+
+- 0=Off
+- 1=1D Horizontal (default)
+
+
+
+CX2341X_ENC_SET_VBI_LINE
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 183/0xB7
+
+Description
+^^^^^^^^^^^
+
+Selects VBI line number.
+
+Param[0]
+^^^^^^^^
+
+- Bits 0:4 	line number
+- Bit  31		0=top_field, 1=bottom_field
+- Bits 0:31 	all set specifies "all lines"
+
+Param[1]
+^^^^^^^^
+
+VBI line information features: 0=disabled, 1=enabled
+
+Param[2]
+^^^^^^^^
+
+Slicing: 0=None, 1=Closed Caption
+Almost certainly not implemented. Set to 0.
+
+Param[3]
+^^^^^^^^
+
+Luminance samples in this line.
+Almost certainly not implemented. Set to 0.
+
+Param[4]
+^^^^^^^^
+
+Chrominance samples in this line
+Almost certainly not implemented. Set to 0.
+
+
+
+CX2341X_ENC_SET_STREAM_TYPE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 185/0xB9
+
+Description
+^^^^^^^^^^^
+
+Assign stream type
+
+.. note::
+
+	Transport stream is not working in recent firmwares.
+	And in older firmwares the timestamps in the TS seem to be
+	unreliable.
+
+Param[0]
+^^^^^^^^
+
+- 0=Program stream
+- 1=Transport stream
+- 2=MPEG1 stream
+- 3=PES A/V stream
+- 5=PES Video stream
+- 7=PES Audio stream
+- 10=DVD stream
+- 11=VCD stream
+- 12=SVCD stream
+- 13=DVD_S1 stream
+- 14=DVD_S2 stream
+
+
+
+CX2341X_ENC_SET_OUTPUT_PORT
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 187/0xBB
+
+Description
+^^^^^^^^^^^
+
+Assign stream output port. Normally 0 when the data is copied through
+the PCI bus (DMA), and 1 when the data is streamed to another chip
+(pvrusb and cx88-blackbird).
+
+Param[0]
+^^^^^^^^
+
+- 0=Memory (default)
+- 1=Streaming
+- 2=Serial
+
+Param[1]
+^^^^^^^^
+
+Unknown, but leaving this to 0 seems to work best. Indications are that
+this might have to do with USB support, although passing anything but 0
+only breaks things.
+
+
+
+CX2341X_ENC_SET_AUDIO_PROPERTIES
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 189/0xBD
+
+Description
+^^^^^^^^^^^
+
+Set audio stream properties, may be called while encoding is in progress.
+
+.. note::
+
+	All bitfields are consistent with ISO11172 documentation except
+	bits 2:3 which ISO docs define as:
+
+	- '11' Layer I
+	- '10' Layer II
+	- '01' Layer III
+	- '00' Undefined
+
+	This discrepancy may indicate a possible error in the documentation.
+	Testing indicated that only Layer II is actually working, and that
+	the minimum bitrate should be 192 kbps.
+
+Param[0]
+^^^^^^^^
+
+Bitmask:
+
+.. code-block:: none
+
+	   0:1  '00' 44.1Khz
+		'01' 48Khz
+		'10' 32Khz
+		'11' reserved
+
+	   2:3  '01'=Layer I
+		'10'=Layer II
+
+	   4:7  Bitrate:
+		     Index | Layer I     | Layer II
+		     ------+-------------+------------
+		    '0000' | free format | free format
+		    '0001' |  32 kbit/s  |  32 kbit/s
+		    '0010' |  64 kbit/s  |  48 kbit/s
+		    '0011' |  96 kbit/s  |  56 kbit/s
+		    '0100' | 128 kbit/s  |  64 kbit/s
+		    '0101' | 160 kbit/s  |  80 kbit/s
+		    '0110' | 192 kbit/s  |  96 kbit/s
+		    '0111' | 224 kbit/s  | 112 kbit/s
+		    '1000' | 256 kbit/s  | 128 kbit/s
+		    '1001' | 288 kbit/s  | 160 kbit/s
+		    '1010' | 320 kbit/s  | 192 kbit/s
+		    '1011' | 352 kbit/s  | 224 kbit/s
+		    '1100' | 384 kbit/s  | 256 kbit/s
+		    '1101' | 416 kbit/s  | 320 kbit/s
+		    '1110' | 448 kbit/s  | 384 kbit/s
+
+		.. note::
+
+			For Layer II, not all combinations of total bitrate
+			and mode are allowed. See ISO11172-3 3-Annex B,
+			Table 3-B.2
+
+	   8:9  '00'=Stereo
+		'01'=JointStereo
+		'10'=Dual
+		'11'=Mono
+
+		.. note::
+
+			The cx23415 cannot decode Joint Stereo properly.
+
+	  10:11 Mode Extension used in joint_stereo mode.
+		In Layer I and II they indicate which subbands are in
+		intensity_stereo. All other subbands are coded in stereo.
+		    '00' subbands 4-31 in intensity_stereo, bound==4
+		    '01' subbands 8-31 in intensity_stereo, bound==8
+		    '10' subbands 12-31 in intensity_stereo, bound==12
+		    '11' subbands 16-31 in intensity_stereo, bound==16
+
+	  12:13 Emphasis:
+		    '00' None
+		    '01' 50/15uS
+		    '10' reserved
+		    '11' CCITT J.17
+
+	  14 	CRC:
+		    '0' off
+		    '1' on
+
+	  15    Copyright:
+		    '0' off
+		    '1' on
+
+	  16    Generation:
+		    '0' copy
+		    '1' original
+
+
+
+CX2341X_ENC_HALT_FW
+~~~~~~~~~~~~~~~~~~~
+
+Enum: 195/0xC3
+
+Description
+^^^^^^^^^^^
+
+The firmware is halted and no further API calls are serviced until the
+firmware is uploaded again.
+
+
+
+CX2341X_ENC_GET_VERSION
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 196/0xC4
+
+Description
+^^^^^^^^^^^
+
+Returns the version of the encoder firmware.
+
+Result[0]
+^^^^^^^^^
+
+Version bitmask:
+- Bits  0:15 build
+- Bits 16:23 minor
+- Bits 24:31 major
+
+
+
+CX2341X_ENC_SET_GOP_CLOSURE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 197/0xC5
+
+Description
+^^^^^^^^^^^
+
+Assigns the GOP open/close property.
+
+Param[0]
+^^^^^^^^
+
+- 0=Open
+- 1=Closed
+
+
+
+CX2341X_ENC_GET_SEQ_END
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 198/0xC6
+
+Description
+^^^^^^^^^^^
+
+Obtains the sequence end code of the encoder's buffer. When a capture
+is started a number of interrupts are still generated, the last of
+which will have Result[0] set to 1 and Result[1] will contain the size
+of the buffer.
+
+Result[0]
+^^^^^^^^^
+
+State of the transfer (1 if last buffer)
+
+Result[1]
+^^^^^^^^^
+
+If Result[0] is 1, this contains the size of the last buffer, undefined
+otherwise.
+
+
+
+CX2341X_ENC_SET_PGM_INDEX_INFO
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 199/0xC7
+
+Description
+^^^^^^^^^^^
+
+Sets the Program Index Information.
+The information is stored as follows:
+
+.. code-block:: c
+
+	struct info {
+		u32 length;		// Length of this frame
+		u32 offset_low;		// Offset in the file of the
+		u32 offset_high;	// start of this frame
+		u32 mask1;		// Bits 0-2 are the type mask:
+					// 1=I, 2=P, 4=B
+					// 0=End of Program Index, other fields
+					//   are invalid.
+		u32 pts;		// The PTS of the frame
+		u32 mask2;		// Bit 0 is bit 32 of the pts.
+	};
+	u32 table_ptr;
+	struct info index[400];
+
+The table_ptr is the encoder memory address in the table were
+*new* entries will be written.
+
+.. note:: This is a ringbuffer, so the table_ptr will wraparound.
+
+Param[0]
+^^^^^^^^
+
+Picture Mask:
+- 0=No index capture
+- 1=I frames
+- 3=I,P frames
+- 7=I,P,B frames
+
+(Seems to be ignored, it always indexes I, P and B frames)
+
+Param[1]
+^^^^^^^^
+
+Elements requested (up to 400)
+
+Result[0]
+^^^^^^^^^
+
+Offset in the encoder memory of the start of the table.
+
+Result[1]
+^^^^^^^^^
+
+Number of allocated elements up to a maximum of Param[1]
+
+
+
+CX2341X_ENC_SET_VBI_CONFIG
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 200/0xC8
+
+Description
+^^^^^^^^^^^
+
+Configure VBI settings
+
+Param[0]
+^^^^^^^^
+
+Bitmap:
+
+.. code-block:: none
+
+	    0    Mode '0' Sliced, '1' Raw
+	    1:3  Insertion:
+		     '000' insert in extension & user data
+		     '001' insert in private packets
+		     '010' separate stream and user data
+		     '111' separate stream and private data
+	    8:15 Stream ID (normally 0xBD)
+
+Param[1]
+^^^^^^^^
+
+Frames per interrupt (max 8). Only valid in raw mode.
+
+Param[2]
+^^^^^^^^
+
+Total raw VBI frames. Only valid in raw mode.
+
+Param[3]
+^^^^^^^^
+
+Start codes
+
+Param[4]
+^^^^^^^^
+
+Stop codes
+
+Param[5]
+^^^^^^^^
+
+Lines per frame
+
+Param[6]
+^^^^^^^^
+
+Byte per line
+
+Result[0]
+^^^^^^^^^
+
+Observed frames per interrupt in raw mode only. Rage 1 to Param[1]
+
+Result[1]
+^^^^^^^^^
+
+Observed number of frames in raw mode. Range 1 to Param[2]
+
+Result[2]
+^^^^^^^^^
+
+Memory offset to start or raw VBI data
+
+
+
+CX2341X_ENC_SET_DMA_BLOCK_SIZE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 201/0xC9
+
+Description
+^^^^^^^^^^^
+
+Set DMA transfer block size
+
+Param[0]
+^^^^^^^^
+
+DMA transfer block size in bytes or frames. When unit is bytes,
+supported block sizes are 2^7, 2^8 and 2^9 bytes.
+
+Param[1]
+^^^^^^^^
+
+Unit: 0=bytes, 1=frames
+
+
+
+CX2341X_ENC_GET_PREV_DMA_INFO_MB_10
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 202/0xCA
+
+Description
+^^^^^^^^^^^
+
+Returns information on the previous DMA transfer in conjunction with
+bit 27 of the interrupt mask. Uses mailbox 10.
+
+Result[0]
+^^^^^^^^^
+
+Type of stream
+
+Result[1]
+^^^^^^^^^
+
+Address Offset
+
+Result[2]
+^^^^^^^^^
+
+Maximum size of transfer
+
+
+
+CX2341X_ENC_GET_PREV_DMA_INFO_MB_9
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 203/0xCB
+
+Description
+^^^^^^^^^^^
+
+Returns information on the previous DMA transfer in conjunction with
+bit 27 or 18 of the interrupt mask. Uses mailbox 9.
+
+Result[0]
+^^^^^^^^^
+
+Status bits:
+- 0   read completed
+- 1   write completed
+- 2   DMA read error
+- 3   DMA write error
+- 4   Scatter-Gather array error
+
+Result[1]
+^^^^^^^^^
+
+DMA type
+
+Result[2]
+^^^^^^^^^
+
+Presentation Time Stamp bits 0..31
+
+Result[3]
+^^^^^^^^^
+
+Presentation Time Stamp bit 32
+
+
+
+CX2341X_ENC_SCHED_DMA_TO_HOST
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 204/0xCC
+
+Description
+^^^^^^^^^^^
+
+Setup DMA to host operation
+
+Param[0]
+^^^^^^^^
+
+Memory address of link list
+
+Param[1]
+^^^^^^^^
+
+Length of link list (wtf: what units ???)
+
+Param[2]
+^^^^^^^^
+
+DMA type (0=MPEG)
+
+
+
+CX2341X_ENC_INITIALIZE_INPUT
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 205/0xCD
+
+Description
+^^^^^^^^^^^
+
+Initializes the video input
+
+
+
+CX2341X_ENC_SET_FRAME_DROP_RATE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 208/0xD0
+
+Description
+^^^^^^^^^^^
+
+For each frame captured, skip specified number of frames.
+
+Param[0]
+^^^^^^^^
+
+Number of frames to skip
+
+
+
+CX2341X_ENC_PAUSE_ENCODER
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 210/0xD2
+
+Description
+^^^^^^^^^^^
+
+During a pause condition, all frames are dropped instead of being encoded.
+
+Param[0]
+^^^^^^^^
+
+- 0=Pause encoding
+- 1=Continue encoding
+
+
+
+CX2341X_ENC_REFRESH_INPUT
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 211/0xD3
+
+Description
+^^^^^^^^^^^
+
+Refreshes the video input
+
+
+
+CX2341X_ENC_SET_COPYRIGHT
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 212/0xD4
+
+Description
+^^^^^^^^^^^
+
+Sets stream copyright property
+
+Param[0]
+^^^^^^^^
+
+
+- 0=Stream is not copyrighted
+- 1=Stream is copyrighted
+
+
+
+CX2341X_ENC_SET_EVENT_NOTIFICATION
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 213/0xD5
+
+Description
+^^^^^^^^^^^
+
+Setup firmware to notify the host about a particular event. Host must
+unmask the interrupt bit.
+
+Param[0]
+^^^^^^^^
+
+Event (0=refresh encoder input)
+
+Param[1]
+^^^^^^^^
+
+Notification 0=disabled 1=enabled
+
+Param[2]
+^^^^^^^^
+
+Interrupt bit
+
+Param[3]
+^^^^^^^^
+
+Mailbox slot, -1 if no mailbox required.
+
+
+
+CX2341X_ENC_SET_NUM_VSYNC_LINES
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 214/0xD6
+
+Description
+^^^^^^^^^^^
+
+Depending on the analog video decoder used, this assigns the number
+of lines for field 1 and 2.
+
+Param[0]
+^^^^^^^^
+
+Field 1 number of lines:
+- 0x00EF for SAA7114
+- 0x00F0 for SAA7115
+- 0x0105 for Micronas
+
+Param[1]
+^^^^^^^^
+
+Field 2 number of lines:
+- 0x00EF for SAA7114
+- 0x00F0 for SAA7115
+- 0x0106 for Micronas
+
+
+
+CX2341X_ENC_SET_PLACEHOLDER
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 215/0xD7
+
+Description
+^^^^^^^^^^^
+
+Provides a mechanism of inserting custom user data in the MPEG stream.
+
+Param[0]
+^^^^^^^^
+
+- 0=extension & user data
+- 1=private packet with stream ID 0xBD
+
+Param[1]
+^^^^^^^^
+
+Rate at which to insert data, in units of frames (for private packet)
+or GOPs (for ext. & user data)
+
+Param[2]
+^^^^^^^^
+
+Number of data DWORDs (below) to insert
+
+Param[3]
+^^^^^^^^
+
+Custom data 0
+
+Param[4]
+^^^^^^^^
+
+Custom data 1
+
+Param[5]
+^^^^^^^^
+
+Custom data 2
+
+Param[6]
+^^^^^^^^
+
+Custom data 3
+
+Param[7]
+^^^^^^^^
+
+Custom data 4
+
+Param[8]
+^^^^^^^^
+
+Custom data 5
+
+Param[9]
+^^^^^^^^
+
+Custom data 6
+
+Param[10]
+^^^^^^^^^
+
+Custom data 7
+
+Param[11]
+^^^^^^^^^
+
+Custom data 8
+
+
+
+CX2341X_ENC_MUTE_VIDEO
+~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 217/0xD9
+
+Description
+^^^^^^^^^^^
+
+Video muting
+
+Param[0]
+^^^^^^^^
+
+Bit usage:
+
+.. code-block:: none
+
+	 0    	'0'=video not muted
+		'1'=video muted, creates frames with the YUV color defined below
+	 1:7  	Unused
+	 8:15 	V chrominance information
+	16:23 	U chrominance information
+	24:31 	Y luminance information
+
+
+
+CX2341X_ENC_MUTE_AUDIO
+~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 218/0xDA
+
+Description
+^^^^^^^^^^^
+
+Audio muting
+
+Param[0]
+^^^^^^^^
+
+- 0=audio not muted
+- 1=audio muted (produces silent mpeg audio stream)
+
+
+
+CX2341X_ENC_SET_VERT_CROP_LINE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 219/0xDB
+
+Description
+^^^^^^^^^^^
+
+Something to do with 'Vertical Crop Line'
+
+Param[0]
+^^^^^^^^
+
+If saa7114 and raw VBI capture and 60 Hz, then set to 10001.
+Else 0.
+
+
+
+CX2341X_ENC_MISC
+~~~~~~~~~~~~~~~~
+
+Enum: 220/0xDC
+
+Description
+^^^^^^^^^^^
+
+Miscellaneous actions. Not known for 100% what it does. It's really a
+sort of ioctl call. The first parameter is a command number, the second
+the value.
+
+Param[0]
+^^^^^^^^
+
+Command number:
+
+.. code-block:: none
+
+	 1=set initial SCR value when starting encoding (works).
+	 2=set quality mode (apparently some test setting).
+	 3=setup advanced VIM protection handling.
+	   Always 1 for the cx23416 and 0 for cx23415.
+	 4=generate DVD compatible PTS timestamps
+	 5=USB flush mode
+	 6=something to do with the quantization matrix
+	 7=set navigation pack insertion for DVD: adds 0xbf (private stream 2)
+	   packets to the MPEG. The size of these packets is 2048 bytes (including
+	   the header of 6 bytes: 0x000001bf + length). The payload is zeroed and
+	   it is up to the application to fill them in. These packets are apparently
+	   inserted every four frames.
+	 8=enable scene change detection (seems to be a failure)
+	 9=set history parameters of the video input module
+	10=set input field order of VIM
+	11=set quantization matrix
+	12=reset audio interface after channel change or input switch (has no argument).
+	   Needed for the cx2584x, not needed for the mspx4xx, but it doesn't seem to
+	   do any harm calling it regardless.
+	13=set audio volume delay
+	14=set audio delay
+
+
+Param[1]
+^^^^^^^^
+
+Command value.
+
+Decoder firmware API description
+--------------------------------
+
+.. note:: this API is part of the decoder firmware, so it's cx23415 only.
+
+
+
+CX2341X_DEC_PING_FW
+~~~~~~~~~~~~~~~~~~~
+
+Enum: 0/0x00
+
+Description
+^^^^^^^^^^^
+
+This API call does nothing. It may be used to check if the firmware
+is responding.
+
+
+
+CX2341X_DEC_START_PLAYBACK
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 1/0x01
+
+Description
+^^^^^^^^^^^
+
+Begin or resume playback.
+
+Param[0]
+^^^^^^^^
+
+0 based frame number in GOP to begin playback from.
+
+Param[1]
+^^^^^^^^
+
+Specifies the number of muted audio frames to play before normal
+audio resumes. (This is not implemented in the firmware, leave at 0)
+
+
+
+CX2341X_DEC_STOP_PLAYBACK
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 2/0x02
+
+Description
+^^^^^^^^^^^
+
+Ends playback and clears all decoder buffers. If PTS is not zero,
+playback stops at specified PTS.
+
+Param[0]
+^^^^^^^^
+
+Display 0=last frame, 1=black
+
+.. note::
+
+	this takes effect immediately, so if you want to wait for a PTS,
+	then use '0', otherwise the screen goes to black at once.
+	You can call this later (even if there is no playback) with a 1 value
+	to set the screen to black.
+
+Param[1]
+^^^^^^^^
+
+PTS low
+
+Param[2]
+^^^^^^^^
+
+PTS high
+
+
+
+CX2341X_DEC_SET_PLAYBACK_SPEED
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 3/0x03
+
+Description
+^^^^^^^^^^^
+
+Playback stream at speed other than normal. There are two modes of
+operation:
+
+	- Smooth: host transfers entire stream and firmware drops unused
+	  frames.
+	- Coarse: host drops frames based on indexing as required to achieve
+	  desired speed.
+
+Param[0]
+^^^^^^^^
+
+.. code-block:: none
+
+	Bitmap:
+	    0:7  0 normal
+		 1 fast only "1.5 times"
+		 n nX fast, 1/nX slow
+	    30   Framedrop:
+		     '0' during 1.5 times play, every other B frame is dropped
+		     '1' during 1.5 times play, stream is unchanged (bitrate
+			 must not exceed 8mbps)
+	    31   Speed:
+		     '0' slow
+		     '1' fast
+
+.. note::
+
+	n is limited to 2. Anything higher does not result in
+	faster playback. Instead the host should start dropping frames.
+
+Param[1]
+^^^^^^^^
+
+Direction: 0=forward, 1=reverse
+
+.. note::
+
+	to make reverse playback work you have to write full GOPs in
+	reverse order.
+
+Param[2]
+^^^^^^^^
+
+.. code-block:: none
+
+	Picture mask:
+	    1=I frames
+	    3=I, P frames
+	    7=I, P, B frames
+
+Param[3]
+^^^^^^^^
+
+B frames per GOP (for reverse play only)
+
+.. note::
+
+	for reverse playback the Picture Mask should be set to I or I, P.
+	Adding B frames to the mask will result in corrupt video. This field
+	has to be set to the correct value in order to keep the timing correct.
+
+Param[4]
+^^^^^^^^
+
+Mute audio: 0=disable, 1=enable
+
+Param[5]
+^^^^^^^^
+
+Display 0=frame, 1=field
+
+Param[6]
+^^^^^^^^
+
+Specifies the number of muted audio frames to play before normal audio
+resumes. (Not implemented in the firmware, leave at 0)
+
+
+
+CX2341X_DEC_STEP_VIDEO
+~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 5/0x05
+
+Description
+^^^^^^^^^^^
+
+Each call to this API steps the playback to the next unit defined below
+in the current playback direction.
+
+Param[0]
+^^^^^^^^
+
+0=frame, 1=top field, 2=bottom field
+
+
+
+CX2341X_DEC_SET_DMA_BLOCK_SIZE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 8/0x08
+
+Description
+^^^^^^^^^^^
+
+Set DMA transfer block size. Counterpart to API 0xC9
+
+Param[0]
+^^^^^^^^
+
+DMA transfer block size in bytes. A different size may be specified
+when issuing the DMA transfer command.
+
+
+
+CX2341X_DEC_GET_XFER_INFO
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 9/0x09
+
+Description
+^^^^^^^^^^^
+
+This API call may be used to detect an end of stream condition.
+
+Result[0]
+^^^^^^^^^
+
+Stream type
+
+Result[1]
+^^^^^^^^^
+
+Address offset
+
+Result[2]
+^^^^^^^^^
+
+Maximum bytes to transfer
+
+Result[3]
+^^^^^^^^^
+
+Buffer fullness
+
+
+
+CX2341X_DEC_GET_DMA_STATUS
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 10/0x0A
+
+Description
+^^^^^^^^^^^
+
+Status of the last DMA transfer
+
+Result[0]
+^^^^^^^^^
+
+Bit 1 set means transfer complete
+Bit 2 set means DMA error
+Bit 3 set means linked list error
+
+Result[1]
+^^^^^^^^^
+
+DMA type: 0=MPEG, 1=OSD, 2=YUV
+
+
+
+CX2341X_DEC_SCHED_DMA_FROM_HOST
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 11/0x0B
+
+Description
+^^^^^^^^^^^
+
+Setup DMA from host operation. Counterpart to API 0xCC
+
+Param[0]
+^^^^^^^^
+
+Memory address of link list
+
+Param[1]
+^^^^^^^^
+
+Total # of bytes to transfer
+
+Param[2]
+^^^^^^^^
+
+DMA type (0=MPEG, 1=OSD, 2=YUV)
+
+
+
+CX2341X_DEC_PAUSE_PLAYBACK
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 13/0x0D
+
+Description
+^^^^^^^^^^^
+
+Freeze playback immediately. In this mode, when internal buffers are
+full, no more data will be accepted and data request IRQs will be
+masked.
+
+Param[0]
+^^^^^^^^
+
+Display: 0=last frame, 1=black
+
+
+
+CX2341X_DEC_HALT_FW
+~~~~~~~~~~~~~~~~~~~
+
+Enum: 14/0x0E
+
+Description
+^^^^^^^^^^^
+
+The firmware is halted and no further API calls are serviced until
+the firmware is uploaded again.
+
+
+
+CX2341X_DEC_SET_STANDARD
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 16/0x10
+
+Description
+^^^^^^^^^^^
+
+Selects display standard
+
+Param[0]
+^^^^^^^^
+
+0=NTSC, 1=PAL
+
+
+
+CX2341X_DEC_GET_VERSION
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 17/0x11
+
+Description
+^^^^^^^^^^^
+
+Returns decoder firmware version information
+
+Result[0]
+^^^^^^^^^
+
+Version bitmask:
+	- Bits  0:15 build
+	- Bits 16:23 minor
+	- Bits 24:31 major
+
+
+
+CX2341X_DEC_SET_STREAM_INPUT
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 20/0x14
+
+Description
+^^^^^^^^^^^
+
+Select decoder stream input port
+
+Param[0]
+^^^^^^^^
+
+0=memory (default), 1=streaming
+
+
+
+CX2341X_DEC_GET_TIMING_INFO
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 21/0x15
+
+Description
+^^^^^^^^^^^
+
+Returns timing information from start of playback
+
+Result[0]
+^^^^^^^^^
+
+Frame count by decode order
+
+Result[1]
+^^^^^^^^^
+
+Video PTS bits 0:31 by display order
+
+Result[2]
+^^^^^^^^^
+
+Video PTS bit 32 by display order
+
+Result[3]
+^^^^^^^^^
+
+SCR bits 0:31 by display order
+
+Result[4]
+^^^^^^^^^
+
+SCR bit 32 by display order
+
+
+
+CX2341X_DEC_SET_AUDIO_MODE
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 22/0x16
+
+Description
+^^^^^^^^^^^
+
+Select audio mode
+
+Param[0]
+^^^^^^^^
+
+Dual mono mode action
+	0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
+
+Param[1]
+^^^^^^^^
+
+Stereo mode action:
+	0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
+
+
+
+CX2341X_DEC_SET_EVENT_NOTIFICATION
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 23/0x17
+
+Description
+^^^^^^^^^^^
+
+Setup firmware to notify the host about a particular event.
+Counterpart to API 0xD5
+
+Param[0]
+^^^^^^^^
+
+Event:
+	- 0=Audio mode change between mono, (joint) stereo and dual channel.
+	- 3=Decoder started
+	- 4=Unknown: goes off 10-15 times per second while decoding.
+	- 5=Some sync event: goes off once per frame.
+
+Param[1]
+^^^^^^^^
+
+Notification 0=disabled, 1=enabled
+
+Param[2]
+^^^^^^^^
+
+Interrupt bit
+
+Param[3]
+^^^^^^^^
+
+Mailbox slot, -1 if no mailbox required.
+
+
+
+CX2341X_DEC_SET_DISPLAY_BUFFERS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 24/0x18
+
+Description
+^^^^^^^^^^^
+
+Number of display buffers. To decode all frames in reverse playback you
+must use nine buffers.
+
+Param[0]
+^^^^^^^^
+
+0=six buffers, 1=nine buffers
+
+
+
+CX2341X_DEC_EXTRACT_VBI
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 25/0x19
+
+Description
+^^^^^^^^^^^
+
+Extracts VBI data
+
+Param[0]
+^^^^^^^^
+
+0=extract from extension & user data, 1=extract from private packets
+
+Result[0]
+^^^^^^^^^
+
+VBI table location
+
+Result[1]
+^^^^^^^^^
+
+VBI table size
+
+
+
+CX2341X_DEC_SET_DECODER_SOURCE
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 26/0x1A
+
+Description
+^^^^^^^^^^^
+
+Selects decoder source. Ensure that the parameters passed to this
+API match the encoder settings.
+
+Param[0]
+^^^^^^^^
+
+Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host
+
+Param[1]
+^^^^^^^^
+
+YUV picture width
+
+Param[2]
+^^^^^^^^
+
+YUV picture height
+
+Param[3]
+^^^^^^^^
+
+Bitmap: see Param[0] of API 0xBD
+
+
+
+CX2341X_DEC_SET_PREBUFFERING
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enum: 30/0x1E
+
+Description
+^^^^^^^^^^^
+
+Decoder prebuffering, when enabled up to 128KB are buffered for
+streams <8mpbs or 640KB for streams >8mbps
+
+Param[0]
+^^^^^^^^
+
+0=off, 1=on
+
+PVR350 Video decoder registers 0x02002800 -> 0x02002B00
+-------------------------------------------------------
+
+Author: Ian Armstrong <ian@iarmst.demon.co.uk>
+
+Version: v0.4
+
+Date: 12 March 2007
+
+
+This list has been worked out through trial and error. There will be mistakes
+and omissions. Some registers have no obvious effect so it's hard to say what
+they do, while others interact with each other, or require a certain load
+sequence. Horizontal filter setup is one example, with six registers working
+in unison and requiring a certain load sequence to correctly configure. The
+indexed colour palette is much easier to set at just two registers, but again
+it requires a certain load sequence.
+
+Some registers are fussy about what they are set to. Load in a bad value & the
+decoder will fail. A firmware reload will often recover, but sometimes a reset
+is required. For registers containing size information, setting them to 0 is
+generally a bad idea. For other control registers i.e. 2878, you'll only find
+out what values are bad when it hangs.
+
+.. code-block:: none
+
+	--------------------------------------------------------------------------------
+	2800
+	bit 0
+		Decoder enable
+		0 = disable
+		1 = enable
+	--------------------------------------------------------------------------------
+	2804
+	bits 0:31
+		Decoder horizontal Y alias register 1
+	---------------
+	2808
+	bits 0:31
+		Decoder horizontal Y alias register 2
+	---------------
+	280C
+	bits 0:31
+		Decoder horizontal Y alias register 3
+	---------------
+	2810
+	bits 0:31
+		Decoder horizontal Y alias register 4
+	---------------
+	2814
+	bits 0:31
+		Decoder horizontal Y alias register 5
+	---------------
+	2818
+	bits 0:31
+		Decoder horizontal Y alias trigger
+
+	These six registers control the horizontal aliasing filter for the Y plane.
+	The first five registers must all be loaded before accessing the trigger
+	(2818), as this register actually clocks the data through for the first
+	five.
+
+	To correctly program set the filter, this whole procedure must be done 16
+	times. The actual register contents are copied from a lookup-table in the
+	firmware which contains 4 different filter settings.
+
+	--------------------------------------------------------------------------------
+	281C
+	bits 0:31
+		Decoder horizontal UV alias register 1
+	---------------
+	2820
+	bits 0:31
+		Decoder horizontal UV alias register 2
+	---------------
+	2824
+	bits 0:31
+		Decoder horizontal UV alias register 3
+	---------------
+	2828
+	bits 0:31
+		Decoder horizontal UV alias register 4
+	---------------
+	282C
+	bits 0:31
+		Decoder horizontal UV alias register 5
+	---------------
+	2830
+	bits 0:31
+		Decoder horizontal UV alias trigger
+
+	These six registers control the horizontal aliasing for the UV plane.
+	Operation is the same as the Y filter, with 2830 being the trigger
+	register.
+
+	--------------------------------------------------------------------------------
+	2834
+	bits 0:15
+		Decoder Y source width in pixels
+
+	bits 16:31
+		Decoder Y destination width in pixels
+	---------------
+	2838
+	bits 0:15
+		Decoder UV source width in pixels
+
+	bits 16:31
+		Decoder UV destination width in pixels
+
+	NOTE: For both registers, the resulting image must be fully visible on
+	screen. If the image exceeds the right edge both the source and destination
+	size must be adjusted to reflect the visible portion. For the source width,
+	you must take into account the scaling when calculating the new value.
+	--------------------------------------------------------------------------------
+
+	283C
+	bits 0:31
+		Decoder Y horizontal scaling
+			Normally = Reg 2854 >> 2
+	---------------
+	2840
+	bits 0:31
+		Decoder ?? unknown - horizontal scaling
+		Usually 0x00080514
+	---------------
+	2844
+	bits 0:31
+		Decoder UV horizontal scaling
+		Normally = Reg 2854 >> 2
+	---------------
+	2848
+	bits 0:31
+		Decoder ?? unknown - horizontal scaling
+		Usually 0x00100514
+	---------------
+	284C
+	bits 0:31
+		Decoder ?? unknown - Y plane
+		Usually 0x00200020
+	---------------
+	2850
+	bits 0:31
+		Decoder ?? unknown - UV plane
+		Usually 0x00200020
+	---------------
+	2854
+	bits 0:31
+		Decoder 'master' value for horizontal scaling
+	---------------
+	2858
+	bits 0:31
+		Decoder ?? unknown
+		Usually 0
+	---------------
+	285C
+	bits 0:31
+		Decoder ?? unknown
+		Normally = Reg 2854 >> 1
+	---------------
+	2860
+	bits 0:31
+		Decoder ?? unknown
+		Usually 0
+	---------------
+	2864
+	bits 0:31
+		Decoder ?? unknown
+		Normally = Reg 2854 >> 1
+	---------------
+	2868
+	bits 0:31
+		Decoder ?? unknown
+		Usually 0
+
+	Most of these registers either control horizontal scaling, or appear linked
+	to it in some way. Register 2854 contains the 'master' value & the other
+	registers can be calculated from that one. You must also remember to
+	correctly set the divider in Reg 2874.
+
+	To enlarge:
+		Reg 2854 = (source_width * 0x00200000) / destination_width
+		Reg 2874 = No divide
+
+	To reduce from full size down to half size:
+		Reg 2854 = (source_width/2 * 0x00200000) / destination width
+		Reg 2874 = Divide by 2
+
+	To reduce from half size down to quarter size:
+		Reg 2854 = (source_width/4 * 0x00200000) / destination width
+		Reg 2874 = Divide by 4
+
+	The result is always rounded up.
+
+	--------------------------------------------------------------------------------
+	286C
+	bits 0:15
+		Decoder horizontal Y buffer offset
+
+	bits 15:31
+		Decoder horizontal UV buffer offset
+
+	Offset into the video image buffer. If the offset is gradually incremented,
+	the on screen image will move left & wrap around higher up on the right.
+
+	--------------------------------------------------------------------------------
+	2870
+	bits 0:15
+		Decoder horizontal Y output offset
+
+	bits 16:31
+		Decoder horizontal UV output offset
+
+	Offsets the actual video output. Controls output alignment of the Y & UV
+	planes. The higher the value, the greater the shift to the left. Use
+	reg 2890 to move the image right.
+
+	--------------------------------------------------------------------------------
+	2874
+	bits 0:1
+		Decoder horizontal Y output size divider
+		00 = No divide
+		01 = Divide by 2
+		10 = Divide by 3
+
+	bits 4:5
+		Decoder horizontal UV output size divider
+		00 = No divide
+		01 = Divide by 2
+		10 = Divide by 3
+
+	bit 8
+		Decoder ?? unknown
+		0 = Normal
+		1 = Affects video output levels
+
+	bit 16
+		Decoder ?? unknown
+		0 = Normal
+		1 = Disable horizontal filter
+
+	--------------------------------------------------------------------------------
+	2878
+	bit 0
+		?? unknown
+
+	bit 1
+		osd on/off
+		0 = osd off
+		1 = osd on
+
+	bit 2
+		Decoder + osd video timing
+		0 = NTSC
+		1 = PAL
+
+	bits 3:4
+		?? unknown
+
+	bit 5
+		Decoder + osd
+		Swaps upper & lower fields
+
+	--------------------------------------------------------------------------------
+	287C
+	bits 0:10
+		Decoder & osd ?? unknown
+		Moves entire screen horizontally. Starts at 0x005 with the screen
+		shifted heavily to the right. Incrementing in steps of 0x004 will
+		gradually shift the screen to the left.
+
+	bits 11:31
+		?? unknown
+
+	Normally contents are 0x00101111 (NTSC) or 0x1010111d (PAL)
+
+	--------------------------------------------------------------------------------
+	2880  --------    ?? unknown
+	2884  --------    ?? unknown
+	--------------------------------------------------------------------------------
+	2888
+	bit 0
+		Decoder + osd ?? unknown
+		0 = Normal
+		1 = Misaligned fields (Correctable through 289C & 28A4)
+
+	bit 4
+		?? unknown
+
+	bit 8
+		?? unknown
+
+	Warning: Bad values will require a firmware reload to recover.
+			Known to be bad are 0x000,0x011,0x100,0x111
+	--------------------------------------------------------------------------------
+	288C
+	bits 0:15
+		osd ?? unknown
+		Appears to affect the osd position stability. The higher the value the
+		more unstable it becomes. Decoder output remains stable.
+
+	bits 16:31
+		osd ?? unknown
+		Same as bits 0:15
+
+	--------------------------------------------------------------------------------
+	2890
+	bits 0:11
+		Decoder output horizontal offset.
+
+	Horizontal offset moves the video image right. A small left shift is
+	possible, but it's better to use reg 2870 for that due to its greater
+	range.
+
+	NOTE: Video corruption will occur if video window is shifted off the right
+	edge. To avoid this read the notes for 2834 & 2838.
+	--------------------------------------------------------------------------------
+	2894
+	bits 0:23
+		Decoder output video surround colour.
+
+	Contains the colour (in yuv) used to fill the screen when the video is
+	running in a window.
+	--------------------------------------------------------------------------------
+	2898
+	bits 0:23
+		Decoder video window colour
+		Contains the colour (in yuv) used to fill the video window when the
+		video is turned off.
+
+	bit 24
+		Decoder video output
+		0 = Video on
+		1 = Video off
+
+	bit 28
+		Decoder plane order
+		0 = Y,UV
+		1 = UV,Y
+
+	bit 29
+		Decoder second plane byte order
+		0 = Normal (UV)
+		1 = Swapped (VU)
+
+	In normal usage, the first plane is Y & the second plane is UV. Though the
+	order of the planes can be swapped, only the byte order of the second plane
+	can be swapped. This isn't much use for the Y plane, but can be useful for
+	the UV plane.
+
+	--------------------------------------------------------------------------------
+	289C
+	bits 0:15
+		Decoder vertical field offset 1
+
+	bits 16:31
+		Decoder vertical field offset 2
+
+	Controls field output vertical alignment. The higher the number, the lower
+	the image on screen. Known starting values are 0x011E0017 (NTSC) &
+	0x01500017 (PAL)
+	--------------------------------------------------------------------------------
+	28A0
+	bits 0:15
+		Decoder & osd width in pixels
+
+	bits 16:31
+		Decoder & osd height in pixels
+
+	All output from the decoder & osd are disabled beyond this area. Decoder
+	output will simply go black outside of this region. If the osd tries to
+	exceed this area it will become corrupt.
+	--------------------------------------------------------------------------------
+	28A4
+	bits 0:11
+		osd left shift.
+
+	Has a range of 0x770->0x7FF. With the exception of 0, any value outside of
+	this range corrupts the osd.
+	--------------------------------------------------------------------------------
+	28A8
+	bits 0:15
+		osd vertical field offset 1
+
+	bits 16:31
+		osd vertical field offset 2
+
+	Controls field output vertical alignment. The higher the number, the lower
+	the image on screen. Known starting values are 0x011E0017 (NTSC) &
+	0x01500017 (PAL)
+	--------------------------------------------------------------------------------
+	28AC  --------    ?? unknown
+	|
+	V
+	28BC  --------    ?? unknown
+	--------------------------------------------------------------------------------
+	28C0
+	bit 0
+		Current output field
+		0 = first field
+		1 = second field
+
+	bits 16:31
+		Current scanline
+		The scanline counts from the top line of the first field
+		through to the last line of the second field.
+	--------------------------------------------------------------------------------
+	28C4  --------    ?? unknown
+	|
+	V
+	28F8  --------    ?? unknown
+	--------------------------------------------------------------------------------
+	28FC
+	bit 0
+		?? unknown
+		0 = Normal
+		1 = Breaks decoder & osd output
+	--------------------------------------------------------------------------------
+	2900
+	bits 0:31
+		Decoder vertical Y alias register 1
+	---------------
+	2904
+	bits 0:31
+		Decoder vertical Y alias register 2
+	---------------
+	2908
+	bits 0:31
+		Decoder vertical Y alias trigger
+
+	These three registers control the vertical aliasing filter for the Y plane.
+	Operation is similar to the horizontal Y filter (2804). The only real
+	difference is that there are only two registers to set before accessing
+	the trigger register (2908). As for the horizontal filter, the values are
+	taken from a lookup table in the firmware, and the procedure must be
+	repeated 16 times to fully program the filter.
+	--------------------------------------------------------------------------------
+	290C
+	bits 0:31
+		Decoder vertical UV alias register 1
+	---------------
+	2910
+	bits 0:31
+		Decoder vertical UV alias register 2
+	---------------
+	2914
+	bits 0:31
+		Decoder vertical UV alias trigger
+
+	These three registers control the vertical aliasing filter for the UV
+	plane. Operation is the same as the Y filter, with 2914 being the trigger.
+	--------------------------------------------------------------------------------
+	2918
+	bits 0:15
+		Decoder Y source height in pixels
+
+	bits 16:31
+		Decoder Y destination height in pixels
+	---------------
+	291C
+	bits 0:15
+		Decoder UV source height in pixels divided by 2
+
+	bits 16:31
+		Decoder UV destination height in pixels
+
+	NOTE: For both registers, the resulting image must be fully visible on
+	screen. If the image exceeds the bottom edge both the source and
+	destination size must be adjusted to reflect the visible portion. For the
+	source height, you must take into account the scaling when calculating the
+	new value.
+	--------------------------------------------------------------------------------
+	2920
+	bits 0:31
+		Decoder Y vertical scaling
+		Normally = Reg 2930 >> 2
+	---------------
+	2924
+	bits 0:31
+		Decoder Y vertical scaling
+		Normally = Reg 2920 + 0x514
+	---------------
+	2928
+	bits 0:31
+		Decoder UV vertical scaling
+		When enlarging = Reg 2930 >> 2
+		When reducing = Reg 2930 >> 3
+	---------------
+	292C
+	bits 0:31
+		Decoder UV vertical scaling
+		Normally = Reg 2928 + 0x514
+	---------------
+	2930
+	bits 0:31
+		Decoder 'master' value for vertical scaling
+	---------------
+	2934
+	bits 0:31
+		Decoder ?? unknown - Y vertical scaling
+	---------------
+	2938
+	bits 0:31
+		Decoder Y vertical scaling
+		Normally = Reg 2930
+	---------------
+	293C
+	bits 0:31
+		Decoder ?? unknown - Y vertical scaling
+	---------------
+	2940
+	bits 0:31
+		Decoder UV vertical scaling
+		When enlarging = Reg 2930 >> 1
+		When reducing = Reg 2930
+	---------------
+	2944
+	bits 0:31
+		Decoder ?? unknown - UV vertical scaling
+	---------------
+	2948
+	bits 0:31
+		Decoder UV vertical scaling
+		Normally = Reg 2940
+	---------------
+	294C
+	bits 0:31
+		Decoder ?? unknown - UV vertical scaling
+
+	Most of these registers either control vertical scaling, or appear linked
+	to it in some way. Register 2930 contains the 'master' value & all other
+	registers can be calculated from that one. You must also remember to
+	correctly set the divider in Reg 296C
+
+	To enlarge:
+		Reg 2930 = (source_height * 0x00200000) / destination_height
+		Reg 296C = No divide
+
+	To reduce from full size down to half size:
+		Reg 2930 = (source_height/2 * 0x00200000) / destination height
+		Reg 296C = Divide by 2
+
+	To reduce from half down to quarter.
+		Reg 2930 = (source_height/4 * 0x00200000) / destination height
+		Reg 296C = Divide by 4
+
+	--------------------------------------------------------------------------------
+	2950
+	bits 0:15
+		Decoder Y line index into display buffer, first field
+
+	bits 16:31
+		Decoder Y vertical line skip, first field
+	--------------------------------------------------------------------------------
+	2954
+	bits 0:15
+		Decoder Y line index into display buffer, second field
+
+	bits 16:31
+		Decoder Y vertical line skip, second field
+	--------------------------------------------------------------------------------
+	2958
+	bits 0:15
+		Decoder UV line index into display buffer, first field
+
+	bits 16:31
+		Decoder UV vertical line skip, first field
+	--------------------------------------------------------------------------------
+	295C
+	bits 0:15
+		Decoder UV line index into display buffer, second field
+
+	bits 16:31
+		Decoder UV vertical line skip, second field
+	--------------------------------------------------------------------------------
+	2960
+	bits 0:15
+		Decoder destination height minus 1
+
+	bits 16:31
+		Decoder destination height divided by 2
+	--------------------------------------------------------------------------------
+	2964
+	bits 0:15
+		Decoder Y vertical offset, second field
+
+	bits 16:31
+		Decoder Y vertical offset, first field
+
+	These two registers shift the Y plane up. The higher the number, the
+	greater the shift.
+	--------------------------------------------------------------------------------
+	2968
+	bits 0:15
+		Decoder UV vertical offset, second field
+
+	bits 16:31
+		Decoder UV vertical offset, first field
+
+	These two registers shift the UV plane up. The higher the number, the
+	greater the shift.
+	--------------------------------------------------------------------------------
+	296C
+	bits 0:1
+		Decoder vertical Y output size divider
+		00 = No divide
+		01 = Divide by 2
+		10 = Divide by 4
+
+	bits 8:9
+		Decoder vertical UV output size divider
+		00 = No divide
+		01 = Divide by 2
+		10 = Divide by 4
+	--------------------------------------------------------------------------------
+	2970
+	bit 0
+		Decoder ?? unknown
+		0 = Normal
+		1 = Affect video output levels
+
+	bit 16
+		Decoder ?? unknown
+		0 = Normal
+		1 = Disable vertical filter
+
+	--------------------------------------------------------------------------------
+	2974  --------   ?? unknown
+	|
+	V
+	29EF  --------   ?? unknown
+	--------------------------------------------------------------------------------
+	2A00
+	bits 0:2
+		osd colour mode
+		000 = 8 bit indexed
+		001 = 16 bit (565)
+		010 = 15 bit (555)
+		011 = 12 bit (444)
+		100 = 32 bit (8888)
+
+	bits 4:5
+		osd display bpp
+		01 = 8 bit
+		10 = 16 bit
+		11 = 32 bit
+
+	bit 8
+		osd global alpha
+		0 = Off
+		1 = On
+
+	bit 9
+		osd local alpha
+		0 = Off
+		1 = On
+
+	bit 10
+		osd colour key
+		0 = Off
+		1 = On
+
+	bit 11
+		osd ?? unknown
+		Must be 1
+
+	bit 13
+		osd colour space
+		0 = ARGB
+		1 = AYVU
+
+	bits 16:31
+		osd ?? unknown
+		Must be 0x001B (some kind of buffer pointer ?)
+
+	When the bits-per-pixel is set to 8, the colour mode is ignored and
+	assumed to be 8 bit indexed. For 16 & 32 bits-per-pixel the colour depth
+	is honoured, and when using a colour depth that requires fewer bytes than
+	allocated the extra bytes are used as padding. So for a 32 bpp with 8 bit
+	index colour, there are 3 padding bytes per pixel. It's also possible to
+	select 16bpp with a 32 bit colour mode. This results in the pixel width
+	being doubled, but the color key will not work as expected in this mode.
+
+	Colour key is as it suggests. You designate a colour which will become
+	completely transparent. When using 565, 555 or 444 colour modes, the
+	colour key is always 16 bits wide. The colour to key on is set in Reg 2A18.
+
+	Local alpha works differently depending on the colour mode. For 32bpp & 8
+	bit indexed, local alpha is a per-pixel 256 step transparency, with 0 being
+	transparent and 255 being solid. For the 16bpp modes 555 & 444, the unused
+	bit(s) act as a simple transparency switch, with 0 being solid & 1 being
+	fully transparent. There is no local alpha support for 16bit 565.
+
+	Global alpha is a 256 step transparency that applies to the entire osd,
+	with 0 being transparent & 255 being solid.
+
+	It's possible to combine colour key, local alpha & global alpha.
+	--------------------------------------------------------------------------------
+	2A04
+	bits 0:15
+		osd x coord for left edge
+
+	bits 16:31
+		osd y coord for top edge
+	---------------
+	2A08
+	bits 0:15
+		osd x coord for right edge
+
+	bits 16:31
+		osd y coord for bottom edge
+
+	For both registers, (0,0) = top left corner of the display area. These
+	registers do not control the osd size, only where it's positioned & how
+	much is visible. The visible osd area cannot exceed the right edge of the
+	display, otherwise the osd will become corrupt. See reg 2A10 for
+	setting osd width.
+	--------------------------------------------------------------------------------
+	2A0C
+	bits 0:31
+		osd buffer index
+
+	An index into the osd buffer. Slowly incrementing this moves the osd left,
+	wrapping around onto the right edge
+	--------------------------------------------------------------------------------
+	2A10
+	bits 0:11
+		osd buffer 32 bit word width
+
+	Contains the width of the osd measured in 32 bit words. This means that all
+	colour modes are restricted to a byte width which is divisible by 4.
+	--------------------------------------------------------------------------------
+	2A14
+	bits 0:15
+		osd height in pixels
+
+	bits 16:32
+		osd line index into buffer
+		osd will start displaying from this line.
+	--------------------------------------------------------------------------------
+	2A18
+	bits 0:31
+		osd colour key
+
+	Contains the colour value which will be transparent.
+	--------------------------------------------------------------------------------
+	2A1C
+	bits 0:7
+		osd global alpha
+
+	Contains the global alpha value (equiv ivtvfbctl --alpha XX)
+	--------------------------------------------------------------------------------
+	2A20  --------    ?? unknown
+	|
+	V
+	2A2C  --------    ?? unknown
+	--------------------------------------------------------------------------------
+	2A30
+	bits 0:7
+		osd colour to change in indexed palette
+	---------------
+	2A34
+	bits 0:31
+		osd colour for indexed palette
+
+	To set the new palette, first load the index of the colour to change into
+	2A30, then load the new colour into 2A34. The full palette is 256 colours,
+	so the index range is 0x00-0xFF
+	--------------------------------------------------------------------------------
+	2A38  --------    ?? unknown
+	2A3C  --------    ?? unknown
+	--------------------------------------------------------------------------------
+	2A40
+	bits 0:31
+		osd ?? unknown
+
+	Affects overall brightness, wrapping around to black
+	--------------------------------------------------------------------------------
+	2A44
+	bits 0:31
+		osd ?? unknown
+
+	Green tint
+	--------------------------------------------------------------------------------
+	2A48
+	bits 0:31
+		osd ?? unknown
+
+	Red tint
+	--------------------------------------------------------------------------------
+	2A4C
+	bits 0:31
+		osd ?? unknown
+
+	Affects overall brightness, wrapping around to black
+	--------------------------------------------------------------------------------
+	2A50
+	bits 0:31
+		osd ?? unknown
+
+	Colour shift
+	--------------------------------------------------------------------------------
+	2A54
+	bits 0:31
+		osd ?? unknown
+
+	Colour shift
+	--------------------------------------------------------------------------------
+	2A58  --------    ?? unknown
+	|
+	V
+	2AFC  --------    ?? unknown
+	--------------------------------------------------------------------------------
+	2B00
+	bit 0
+		osd filter control
+		0 = filter off
+		1 = filter on
+
+	bits 1:4
+		osd ?? unknown
+
+	--------------------------------------------------------------------------------
+
+The cx231xx DMA engine
+----------------------
+
+
+This page describes the structures and procedures used by the cx2341x DMA
+engine.
+
+Introduction
+~~~~~~~~~~~~
+
+The cx2341x PCI interface is busmaster capable. This means it has a DMA
+engine to efficiently transfer large volumes of data between the card and main
+memory without requiring help from a CPU. Like most hardware, it must operate
+on contiguous physical memory. This is difficult to come by in large quantities
+on virtual memory machines.
+
+Therefore, it also supports a technique called "scatter-gather". The card can
+transfer multiple buffers in one operation. Instead of allocating one large
+contiguous buffer, the driver can allocate several smaller buffers.
+
+In practice, I've seen the average transfer to be roughly 80K, but transfers
+above 128K were not uncommon, particularly at startup. The 128K figure is
+important, because that is the largest block that the kernel can normally
+allocate. Even still, 128K blocks are hard to come by, so the driver writer is
+urged to choose a smaller block size and learn the scatter-gather technique.
+
+Mailbox #10 is reserved for DMA transfer information.
+
+Note: the hardware expects little-endian data ('intel format').
+
+Flow
+~~~~
+
+This section describes, in general, the order of events when handling DMA
+transfers. Detailed information follows this section.
+
+- The card raises the Encoder interrupt.
+- The driver reads the transfer type, offset and size from Mailbox #10.
+- The driver constructs the scatter-gather array from enough free dma buffers
+  to cover the size.
+- The driver schedules the DMA transfer via the ScheduleDMAtoHost API call.
+- The card raises the DMA Complete interrupt.
+- The driver checks the DMA status register for any errors.
+- The driver post-processes the newly transferred buffers.
+
+NOTE! It is possible that the Encoder and DMA Complete interrupts get raised
+simultaneously. (End of the last, start of the next, etc.)
+
+Mailbox #10
+~~~~~~~~~~~
+
+The Flags, Command, Return Value and Timeout fields are ignored.
+
+- Name:       Mailbox #10
+- Results[0]: Type: 0: MPEG.
+- Results[1]: Offset: The position relative to the card's memory space.
+- Results[2]: Size: The exact number of bytes to transfer.
+
+My speculation is that since the StartCapture API has a capture type of "RAW"
+available, that the type field will have other values that correspond to YUV
+and PCM data.
+
+Scatter-Gather Array
+~~~~~~~~~~~~~~~~~~~~
+
+The scatter-gather array is a contiguously allocated block of memory that
+tells the card the source and destination of each data-block to transfer.
+Card "addresses" are derived from the offset supplied by Mailbox #10. Host
+addresses are the physical memory location of the target DMA buffer.
+
+Each S-G array element is a struct of three 32-bit words. The first word is
+the source address, the second is the destination address. Both take up the
+entire 32 bits. The lowest 18 bits of the third word is the transfer byte
+count. The high-bit of the third word is the "last" flag. The last-flag tells
+the card to raise the DMA_DONE interrupt. From hard personal experience, if
+you forget to set this bit, the card will still "work" but the stream will
+most likely get corrupted.
+
+The transfer count must be a multiple of 256. Therefore, the driver will need
+to track how much data in the target buffer is valid and deal with it
+accordingly.
+
+Array Element:
+
+- 32-bit Source Address
+- 32-bit Destination Address
+- 14-bit reserved (high bit is the last flag)
+- 18-bit byte count
+
+DMA Transfer Status
+~~~~~~~~~~~~~~~~~~~
+
+Register 0x0004 holds the DMA Transfer Status:
+
+- bit 0:   read completed
+- bit 1:   write completed
+- bit 2:   DMA read error
+- bit 3:   DMA write error
+- bit 4:   Scatter-Gather array error
diff --git a/Documentation/driver-api/media/drivers/cx88-devel.rst b/Documentation/driver-api/media/drivers/cx88-devel.rst
new file mode 100644
index 000000000000..cfe7c03f4930
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/cx88-devel.rst
@@ -0,0 +1,113 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The cx88 driver
+===============
+
+Author:  Gerd Hoffmann
+
+Documentation missing at the cx88 datasheet
+-------------------------------------------
+
+MO_OUTPUT_FORMAT (0x310164)
+
+.. code-block:: none
+
+  Previous default from DScaler: 0x1c1f0008
+  Digit 8: 31-28
+  28: PREVREMOD = 1
+
+  Digit 7: 27-24 (0xc = 12 = b1100 )
+  27: COMBALT = 1
+  26: PAL_INV_PHASE
+    (DScaler apparently set this to 1, resulted in sucky picture)
+
+  Digits 6,5: 23-16
+  25-16: COMB_RANGE = 0x1f [default] (9 bits -> max 512)
+
+  Digit 4: 15-12
+  15: DISIFX = 0
+  14: INVCBF = 0
+  13: DISADAPT = 0
+  12: NARROWADAPT = 0
+
+  Digit 3: 11-8
+  11: FORCE2H
+  10: FORCEREMD
+  9: NCHROMAEN
+  8: NREMODEN
+
+  Digit 2: 7-4
+  7-6: YCORE
+  5-4: CCORE
+
+  Digit 1: 3-0
+  3: RANGE = 1
+  2: HACTEXT
+  1: HSFMT
+
+0x47 is the sync byte for MPEG-2 transport stream packets.
+Datasheet incorrectly states to use 47 decimal. 188 is the length.
+All DVB compliant frontends output packets with this start code.
+
+Hauppauge WinTV cx88 IR information
+-----------------------------------
+
+The controls for the mux are GPIO [0,1] for source, and GPIO 2 for muting.
+
+====== ======== =================================================
+GPIO0  GPIO1
+====== ======== =================================================
+  0        0    TV Audio
+  1        0    FM radio
+  0        1    Line-In
+  1        1    Mono tuner bypass or CD passthru (tuner specific)
+====== ======== =================================================
+
+GPIO 16(I believe) is tied to the IR port (if present).
+
+
+From the data sheet:
+
+- Register 24'h20004  PCI Interrupt Status
+
+ - bit [18]  IR_SMP_INT Set when 32 input samples have been collected over
+ - gpio[16] pin into GP_SAMPLE register.
+
+What's missing from the data sheet:
+
+- Setup 4KHz sampling rate (roughly 2x oversampled; good enough for our RC5
+  compat remote)
+- set register 0x35C050 to  0xa80a80
+- enable sampling
+- set register 0x35C054 to 0x5
+- enable the IRQ bit 18 in the interrupt mask register (and
+  provide for a handler)
+
+GP_SAMPLE register is at 0x35C058
+
+Bits are then right shifted into the GP_SAMPLE register at the specified
+rate; you get an interrupt when a full DWORD is received.
+You need to recover the actual RC5 bits out of the (oversampled) IR sensor
+bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data)  An
+actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
+
+I'm pretty sure when no IR signal is present the receiver is always in a
+marking state(1); but stray light, etc can cause intermittent noise values
+as well.  Remember, this is a free running sample of the IR receiver state
+over time, so don't assume any sample starts at any particular place.
+
+Additional info
+~~~~~~~~~~~~~~~
+
+This data sheet (google search) seems to have a lovely description of the
+RC5 basics:
+http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
+
+This document has more data:
+http://www.nenya.be/beor/electronics/rc5.htm
+
+This document has a  how to decode a bi-phase data stream:
+http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
+
+This document has still more info:
+http://www.xs4all.nl/~sbp/knowledge/ir/rc5.htm
diff --git a/Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst b/Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst
new file mode 100644
index 000000000000..f0961672e6a3
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The VPBE V4L2 driver design
+===========================
+
+File partitioning
+-----------------
+
+ V4L2 display device driver
+         drivers/media/platform/davinci/vpbe_display.c
+         drivers/media/platform/davinci/vpbe_display.h
+
+ VPBE display controller
+         drivers/media/platform/davinci/vpbe.c
+         drivers/media/platform/davinci/vpbe.h
+
+ VPBE venc sub device driver
+         drivers/media/platform/davinci/vpbe_venc.c
+         drivers/media/platform/davinci/vpbe_venc.h
+         drivers/media/platform/davinci/vpbe_venc_regs.h
+
+ VPBE osd driver
+         drivers/media/platform/davinci/vpbe_osd.c
+         drivers/media/platform/davinci/vpbe_osd.h
+         drivers/media/platform/davinci/vpbe_osd_regs.h
+
+To be done
+----------
+
+vpbe display controller
+    - Add support for external encoders.
+    - add support for selecting external encoder as default at probe time.
+
+vpbe venc sub device
+    - add timings for supporting ths8200
+    - add support for LogicPD LCD.
+
+FB drivers
+    - Add support for fbdev drivers.- Ready and part of subsequent patches.
diff --git a/Documentation/driver-api/media/drivers/dvb-usb.rst b/Documentation/driver-api/media/drivers/dvb-usb.rst
new file mode 100644
index 000000000000..b2d5d9e62b30
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/dvb-usb.rst
@@ -0,0 +1,357 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Idea behind the dvb-usb-framework
+=================================
+
+.. note::
+
+   #) This documentation is outdated. Please check at the DVB wiki
+      at https://linuxtv.org/wiki for more updated info.
+
+   #) **deprecated:** Newer DVB USB drivers should use the dvb-usb-v2 framework.
+
+In March 2005 I got the new Twinhan USB2.0 DVB-T device. They provided specs
+and a firmware.
+
+Quite keen I wanted to put the driver (with some quirks of course) into dibusb.
+After reading some specs and doing some USB snooping, it realized, that the
+dibusb-driver would be a complete mess afterwards. So I decided to do it in a
+different way: With the help of a dvb-usb-framework.
+
+The framework provides generic functions (mostly kernel API calls), such as:
+
+- Transport Stream URB handling in conjunction with dvb-demux-feed-control
+  (bulk and isoc are supported)
+- registering the device for the DVB-API
+- registering an I2C-adapter if applicable
+- remote-control/input-device handling
+- firmware requesting and loading (currently just for the Cypress USB
+  controllers)
+- other functions/methods which can be shared by several drivers (such as
+  functions for bulk-control-commands)
+- TODO: a I2C-chunker. It creates device-specific chunks of register-accesses
+  depending on length of a register and the number of values that can be
+  multi-written and multi-read.
+
+The source code of the particular DVB USB devices does just the communication
+with the device via the bus. The connection between the DVB-API-functionality
+is done via callbacks, assigned in a static device-description (struct
+dvb_usb_device) each device-driver has to have.
+
+For an example have a look in drivers/media/usb/dvb-usb/vp7045*.
+
+Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the
+ttusb; flexcop-usb already benefits from the generic flexcop-device) to use
+the dvb-usb-lib.
+
+TODO: dynamic enabling and disabling of the pid-filter in regard to number of
+feeds requested.
+
+Supported devices
+-----------------
+
+See the LinuxTV DVB Wiki at https://linuxtv.org for a complete list of
+cards/drivers/firmwares:
+https://linuxtv.org/wiki/index.php/DVB_USB
+
+0. History & News:
+
+  2005-06-30
+
+  - added support for WideView WT-220U (Thanks to Steve Chang)
+
+  2005-05-30
+
+  - added basic isochronous support to the dvb-usb-framework
+  - added support for Conexant Hybrid reference design and Nebula
+	       DigiTV USB
+
+  2005-04-17
+
+  - all dibusb devices ported to make use of the dvb-usb-framework
+
+  2005-04-02
+
+  - re-enabled and improved remote control code.
+
+  2005-03-31
+
+  - ported the Yakumo/Hama/Typhoon DVB-T USB2.0 device to dvb-usb.
+
+  2005-03-30
+
+  - first commit of the dvb-usb-module based on the dibusb-source.
+    First device is a new driver for the
+    TwinhanDTV Alpha / MagicBox II USB2.0-only DVB-T device.
+  - (change from dvb-dibusb to dvb-usb)
+
+  2005-03-28
+
+  - added support for the AVerMedia AverTV DVB-T USB2.0 device
+    (Thanks to Glen Harris and Jiun-Kuei Jung, AVerMedia)
+
+  2005-03-14
+
+  - added support for the Typhoon/Yakumo/HAMA DVB-T mobile USB2.0
+
+  2005-02-11
+
+  - added support for the KWorld/ADSTech Instant DVB-T USB2.0.
+    Thanks a lot to Joachim von Caron
+
+  2005-02-02
+  - added support for the Hauppauge Win-TV Nova-T USB2
+
+  2005-01-31
+  - distorted streaming is gone for USB1.1 devices
+
+  2005-01-13
+
+  - moved the mirrored pid_filter_table back to dvb-dibusb
+    first almost working version for HanfTek UMT-010
+    found out, that Yakumo/HAMA/Typhoon are predecessors of the HanfTek UMT-010
+
+  2005-01-10
+
+  - refactoring completed, now everything is very delightful
+
+  - tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a
+    Panasonic Tuner assembled). Tunerprobing implemented.
+    Thanks a lot to Gunnar Wittich.
+
+  2004-12-29
+
+  - after several days of struggling around bug of no returning URBs fixed.
+
+  2004-12-26
+
+  - refactored the dibusb-driver, split into separate files
+  - i2c-probing enabled
+
+  2004-12-06
+
+  - possibility for demod i2c-address probing
+  - new usb IDs (Compro, Artec)
+
+  2004-11-23
+
+  - merged changes from DiB3000MC_ver2.1
+  - revised the debugging
+  - possibility to deliver the complete TS for USB2.0
+
+  2004-11-21
+
+  - first working version of the dib3000mc/p frontend driver.
+
+  2004-11-12
+
+  - added additional remote control keys. Thanks to Uwe Hanke.
+
+  2004-11-07
+
+  - added remote control support. Thanks to David Matthews.
+
+  2004-11-05
+
+  - added support for a new devices (Grandtec/Avermedia/Artec)
+  - merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD
+  - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
+    better settled there (added xfer_ops-struct)
+  - created a common files for frontends (mc/p/mb)
+
+  2004-09-28
+
+  - added support for a new device (Unknown, vendor ID is Hyper-Paltek)
+
+  2004-09-20
+
+  - added support for a new device (Compro DVB-U2000), thanks
+    to Amaury Demol for reporting
+  - changed usb TS transfer method (several urbs, stopping transfer
+    before setting a new pid)
+
+  2004-09-13
+
+  - added support for a new device (Artec T1 USB TVBOX), thanks
+    to Christian Motschke for reporting
+
+  2004-09-05
+
+  - released the dibusb device and dib3000mb-frontend driver
+    (old news for vp7041.c)
+
+  2004-07-15
+
+  - found out, by accident, that the device has a TUA6010XS for PLL
+
+  2004-07-12
+
+  - figured out, that the driver should also work with the
+    CTS Portable (Chinese Television System)
+
+  2004-07-08
+
+  - firmware-extraction-2.422-problem solved, driver is now working
+    properly with firmware extracted from 2.422
+  - #if for 2.6.4 (dvb), compile issue
+  - changed firmware handling, see vp7041.txt sec 1.1
+
+  2004-07-02
+
+  - some tuner modifications, v0.1, cleanups, first public
+
+  2004-06-28
+
+  - now using the dvb_dmx_swfilter_packets, everything runs fine now
+
+  2004-06-27
+
+  - able to watch and switching channels (pre-alpha)
+  - no section filtering yet
+
+  2004-06-06
+
+  - first TS received, but kernel oops :/
+
+  2004-05-14
+
+  - firmware loader is working
+
+  2004-05-11
+
+  - start writing the driver
+
+How to use?
+-----------
+
+Firmware
+~~~~~~~~
+
+Most of the USB drivers need to download a firmware to the device before start
+working.
+
+Have a look at the Wikipage for the DVB-USB-drivers to find out, which firmware
+you need for your device:
+
+https://linuxtv.org/wiki/index.php/DVB_USB
+
+Compiling
+~~~~~~~~~
+
+Since the driver is in the linux kernel, activating the driver in
+your favorite config-environment should sufficient. I recommend
+to compile the driver as module. Hotplug does the rest.
+
+If you use dvb-kernel enter the build-2.6 directory run 'make' and 'insmod.sh
+load' afterwards.
+
+Loading the drivers
+~~~~~~~~~~~~~~~~~~~
+
+Hotplug is able to load the driver, when it is needed (because you plugged
+in the device).
+
+If you want to enable debug output, you have to load the driver manually and
+from within the dvb-kernel cvs repository.
+
+first have a look, which debug level are available:
+
+.. code-block:: none
+
+	# modinfo dvb-usb
+	# modinfo dvb-usb-vp7045
+
+	etc.
+
+.. code-block:: none
+
+	modprobe dvb-usb debug=<level>
+	modprobe dvb-usb-vp7045 debug=<level>
+	etc.
+
+should do the trick.
+
+When the driver is loaded successfully, the firmware file was in
+the right place and the device is connected, the "Power"-LED should be
+turned on.
+
+At this point you should be able to start a dvb-capable application. I'm use
+(t|s)zap, mplayer and dvbscan to test the basics. VDR-xine provides the
+long-term test scenario.
+
+Known problems and bugs
+-----------------------
+
+- Don't remove the USB device while running an DVB application, your system
+  will go crazy or die most likely.
+
+Adding support for devices
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+TODO
+
+USB1.1 Bandwidth limitation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A lot of the currently supported devices are USB1.1 and thus they have a
+maximum bandwidth of about 5-6 MBit/s when connected to a USB2.0 hub.
+This is not enough for receiving the complete transport stream of a
+DVB-T channel (which is about 16 MBit/s). Normally this is not a
+problem, if you only want to watch TV (this does not apply for HDTV),
+but watching a channel while recording another channel on the same
+frequency simply does not work very well. This applies to all USB1.1
+DVB-T devices, not just the dvb-usb-devices)
+
+The bug, where the TS is distorted by a heavy usage of the device is gone
+definitely. All dvb-usb-devices I was using (Twinhan, Kworld, DiBcom) are
+working like charm now with VDR. Sometimes I even was able to record a channel
+and watch another one.
+
+Comments
+~~~~~~~~
+
+Patches, comments and suggestions are very very welcome.
+
+3. Acknowledgements
+-------------------
+
+   Amaury Demol (Amaury.Demol@parrot.com) and Francois Kanounnikoff from DiBcom for
+   providing specs, code and help, on which the dvb-dibusb, dib3000mb and
+   dib3000mc are based.
+
+   David Matthews for identifying a new device type (Artec T1 with AN2235)
+   and for extending dibusb with remote control event handling. Thank you.
+
+   Alex Woods for frequently answering question about usb and dvb
+   stuff, a big thank you.
+
+   Bernd Wagner for helping with huge bug reports and discussions.
+
+   Gunnar Wittich and Joachim von Caron for their trust for providing
+   root-shells on their machines to implement support for new devices.
+
+   Allan Third and Michael Hutchinson for their help to write the Nebula
+   digitv-driver.
+
+   Glen Harris for bringing up, that there is a new dibusb-device and Jiun-Kuei
+   Jung from AVerMedia who kindly provided a special firmware to get the device
+   up and running in Linux.
+
+   Jennifer Chen, Jeff and Jack from Twinhan for kindly supporting by
+   writing the vp7045-driver.
+
+   Steve Chang from WideView for providing information for new devices and
+   firmware files.
+
+   Michael Paxton for submitting remote control keymaps.
+
+   Some guys on the linux-dvb mailing list for encouraging me.
+
+   Peter Schildmann >peter.schildmann-nospam-at-web.de< for his
+   user-level firmware loader, which saves a lot of time
+   (when writing the vp7041 driver)
+
+   Ulf Hermenau for helping me out with traditional chinese.
+
+   André Smoktun and Christian Frömmel for supporting me with
+   hardware and listening to my problems very patiently.
diff --git a/Documentation/driver-api/media/drivers/fimc-devel.rst b/Documentation/driver-api/media/drivers/fimc-devel.rst
new file mode 100644
index 000000000000..956e3a9901f8
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/fimc-devel.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+The Samsung S5P/EXYNOS4 FIMC driver
+===================================
+
+Copyright |copy| 2012 - 2013 Samsung Electronics Co., Ltd.
+
+Files partitioning
+------------------
+
+- media device driver
+
+  drivers/media/platform/exynos4-is/media-dev.[ch]
+
+- camera capture video device driver
+
+  drivers/media/platform/exynos4-is/fimc-capture.c
+
+- MIPI-CSI2 receiver subdev
+
+  drivers/media/platform/exynos4-is/mipi-csis.[ch]
+
+- video post-processor (mem-to-mem)
+
+  drivers/media/platform/exynos4-is/fimc-core.c
+
+- common files
+
+  drivers/media/platform/exynos4-is/fimc-core.h
+  drivers/media/platform/exynos4-is/fimc-reg.h
+  drivers/media/platform/exynos4-is/regs-fimc.h
diff --git a/Documentation/driver-api/media/drivers/frontends.rst b/Documentation/driver-api/media/drivers/frontends.rst
new file mode 100644
index 000000000000..7b8336ece681
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/frontends.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+****************
+Frontend drivers
+****************
+
+Frontend attach headers
+***********************
+
+.. Keep it on alphabetic order
+
+.. kernel-doc:: drivers/media/dvb-frontends/a8293.h
+.. kernel-doc:: drivers/media/dvb-frontends/af9013.h
+.. kernel-doc:: drivers/media/dvb-frontends/ascot2e.h
+.. kernel-doc:: drivers/media/dvb-frontends/cxd2820r.h
+.. kernel-doc:: drivers/media/dvb-frontends/drxk.h
+.. kernel-doc:: drivers/media/dvb-frontends/dvb-pll.h
+.. kernel-doc:: drivers/media/dvb-frontends/helene.h
+.. kernel-doc:: drivers/media/dvb-frontends/horus3a.h
+.. kernel-doc:: drivers/media/dvb-frontends/ix2505v.h
+.. kernel-doc:: drivers/media/dvb-frontends/m88ds3103.h
+.. kernel-doc:: drivers/media/dvb-frontends/mb86a20s.h
+.. kernel-doc:: drivers/media/dvb-frontends/mn88472.h
+.. kernel-doc:: drivers/media/dvb-frontends/rtl2830.h
+.. kernel-doc:: drivers/media/dvb-frontends/rtl2832.h
+.. kernel-doc:: drivers/media/dvb-frontends/rtl2832_sdr.h
+.. kernel-doc:: drivers/media/dvb-frontends/stb6000.h
+.. kernel-doc:: drivers/media/dvb-frontends/tda10071.h
+.. kernel-doc:: drivers/media/dvb-frontends/tda826x.h
+.. kernel-doc:: drivers/media/dvb-frontends/zd1301_demod.h
+.. kernel-doc:: drivers/media/dvb-frontends/zl10036.h
+
diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst
new file mode 100644
index 000000000000..0df85fc96605
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/index.rst
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+===================================
+Media driver-specific documentation
+===================================
+
+Video4Linux (V4L) drivers
+=========================
+
+.. toctree::
+	:maxdepth: 5
+
+	bttv-devel
+	cpia2_devel
+	cx2341x-devel
+	cx88-devel
+	davinci-vpbe-devel
+	fimc-devel
+	pvrusb2
+	pxa_camera
+	radiotrack
+	saa7134-devel
+	sh_mobile_ceu_camera
+	tuners
+	vimc-devel
+
+
+Digital TV drivers
+==================
+
+.. toctree::
+	:maxdepth: 5
+
+	dvb-usb
+	frontends
+	contributors
diff --git a/Documentation/driver-api/media/drivers/pvrusb2.rst b/Documentation/driver-api/media/drivers/pvrusb2.rst
new file mode 100644
index 000000000000..83bfaa531ea8
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/pvrusb2.rst
@@ -0,0 +1,202 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The pvrusb2 driver
+==================
+
+Author: Mike Isely <isely@pobox.com>
+
+Background
+----------
+
+This driver is intended for the "Hauppauge WinTV PVR USB 2.0", which
+is a USB 2.0 hosted TV Tuner.  This driver is a work in progress.
+Its history started with the reverse-engineering effort by Björn
+Danielsson <pvrusb2@dax.nu> whose web page can be found here:
+http://pvrusb2.dax.nu/
+
+From there Aurelien Alleaume <slts@free.fr> began an effort to
+create a video4linux compatible driver.  I began with Aurelien's
+last known snapshot and evolved the driver to the state it is in
+here.
+
+More information on this driver can be found at:
+http://www.isely.net/pvrusb2.html
+
+
+This driver has a strong separation of layers.  They are very
+roughly:
+
+1. Low level wire-protocol implementation with the device.
+
+2. I2C adaptor implementation and corresponding I2C client drivers
+   implemented elsewhere in V4L.
+
+3. High level hardware driver implementation which coordinates all
+   activities that ensure correct operation of the device.
+
+4. A "context" layer which manages instancing of driver, setup,
+   tear-down, arbitration, and interaction with high level
+   interfaces appropriately as devices are hotplugged in the
+   system.
+
+5. High level interfaces which glue the driver to various published
+   Linux APIs (V4L, sysfs, maybe DVB in the future).
+
+The most important shearing layer is between the top 2 layers.  A
+lot of work went into the driver to ensure that any kind of
+conceivable API can be laid on top of the core driver.  (Yes, the
+driver internally leverages V4L to do its work but that really has
+nothing to do with the API published by the driver to the outside
+world.)  The architecture allows for different APIs to
+simultaneously access the driver.  I have a strong sense of fairness
+about APIs and also feel that it is a good design principle to keep
+implementation and interface isolated from each other.  Thus while
+right now the V4L high level interface is the most complete, the
+sysfs high level interface will work equally well for similar
+functions, and there's no reason I see right now why it shouldn't be
+possible to produce a DVB high level interface that can sit right
+alongside V4L.
+
+Building
+--------
+
+To build these modules essentially amounts to just running "Make",
+but you need the kernel source tree nearby and you will likely also
+want to set a few controlling environment variables first in order
+to link things up with that source tree.  Please see the Makefile
+here for comments that explain how to do that.
+
+Source file list / functional overview
+--------------------------------------
+
+(Note: The term "module" used below generally refers to loosely
+defined functional units within the pvrusb2 driver and bears no
+relation to the Linux kernel's concept of a loadable module.)
+
+pvrusb2-audio.[ch] - This is glue logic that resides between this
+    driver and the msp3400.ko I2C client driver (which is found
+    elsewhere in V4L).
+
+pvrusb2-context.[ch] - This module implements the context for an
+    instance of the driver.  Everything else eventually ties back to
+    or is otherwise instanced within the data structures implemented
+    here.  Hotplugging is ultimately coordinated here.  All high level
+    interfaces tie into the driver through this module.  This module
+    helps arbitrate each interface's access to the actual driver core,
+    and is designed to allow concurrent access through multiple
+    instances of multiple interfaces (thus you can for example change
+    the tuner's frequency through sysfs while simultaneously streaming
+    video through V4L out to an instance of mplayer).
+
+pvrusb2-debug.h - This header defines a printk() wrapper and a mask
+    of debugging bit definitions for the various kinds of debug
+    messages that can be enabled within the driver.
+
+pvrusb2-debugifc.[ch] - This module implements a crude command line
+    oriented debug interface into the driver.  Aside from being part
+    of the process for implementing manual firmware extraction (see
+    the pvrusb2 web site mentioned earlier), probably I'm the only one
+    who has ever used this.  It is mainly a debugging aid.
+
+pvrusb2-eeprom.[ch] - This is glue logic that resides between this
+    driver the tveeprom.ko module, which is itself implemented
+    elsewhere in V4L.
+
+pvrusb2-encoder.[ch] - This module implements all protocol needed to
+    interact with the Conexant mpeg2 encoder chip within the pvrusb2
+    device.  It is a crude echo of corresponding logic in ivtv,
+    however the design goals (strict isolation) and physical layer
+    (proxy through USB instead of PCI) are enough different that this
+    implementation had to be completely different.
+
+pvrusb2-hdw-internal.h - This header defines the core data structure
+    in the driver used to track ALL internal state related to control
+    of the hardware.  Nobody outside of the core hardware-handling
+    modules should have any business using this header.  All external
+    access to the driver should be through one of the high level
+    interfaces (e.g. V4L, sysfs, etc), and in fact even those high
+    level interfaces are restricted to the API defined in
+    pvrusb2-hdw.h and NOT this header.
+
+pvrusb2-hdw.h - This header defines the full internal API for
+    controlling the hardware.  High level interfaces (e.g. V4L, sysfs)
+    will work through here.
+
+pvrusb2-hdw.c - This module implements all the various bits of logic
+    that handle overall control of a specific pvrusb2 device.
+    (Policy, instantiation, and arbitration of pvrusb2 devices fall
+    within the jurisdiction of pvrusb-context not here).
+
+pvrusb2-i2c-chips-\*.c - These modules implement the glue logic to
+    tie together and configure various I2C modules as they attach to
+    the I2C bus.  There are two versions of this file.  The "v4l2"
+    version is intended to be used in-tree alongside V4L, where we
+    implement just the logic that makes sense for a pure V4L
+    environment.  The "all" version is intended for use outside of
+    V4L, where we might encounter other possibly "challenging" modules
+    from ivtv or older kernel snapshots (or even the support modules
+    in the standalone snapshot).
+
+pvrusb2-i2c-cmd-v4l1.[ch] - This module implements generic V4L1
+    compatible commands to the I2C modules.  It is here where state
+    changes inside the pvrusb2 driver are translated into V4L1
+    commands that are in turn send to the various I2C modules.
+
+pvrusb2-i2c-cmd-v4l2.[ch] - This module implements generic V4L2
+    compatible commands to the I2C modules.  It is here where state
+    changes inside the pvrusb2 driver are translated into V4L2
+    commands that are in turn send to the various I2C modules.
+
+pvrusb2-i2c-core.[ch] - This module provides an implementation of a
+    kernel-friendly I2C adaptor driver, through which other external
+    I2C client drivers (e.g. msp3400, tuner, lirc) may connect and
+    operate corresponding chips within the pvrusb2 device.  It is
+    through here that other V4L modules can reach into this driver to
+    operate specific pieces (and those modules are in turn driven by
+    glue logic which is coordinated by pvrusb2-hdw, doled out by
+    pvrusb2-context, and then ultimately made available to users
+    through one of the high level interfaces).
+
+pvrusb2-io.[ch] - This module implements a very low level ring of
+    transfer buffers, required in order to stream data from the
+    device.  This module is *very* low level.  It only operates the
+    buffers and makes no attempt to define any policy or mechanism for
+    how such buffers might be used.
+
+pvrusb2-ioread.[ch] - This module layers on top of pvrusb2-io.[ch]
+    to provide a streaming API usable by a read() system call style of
+    I/O.  Right now this is the only layer on top of pvrusb2-io.[ch],
+    however the underlying architecture here was intended to allow for
+    other styles of I/O to be implemented with additional modules, like
+    mmap()'ed buffers or something even more exotic.
+
+pvrusb2-main.c - This is the top level of the driver.  Module level
+    and USB core entry points are here.  This is our "main".
+
+pvrusb2-sysfs.[ch] - This is the high level interface which ties the
+    pvrusb2 driver into sysfs.  Through this interface you can do
+    everything with the driver except actually stream data.
+
+pvrusb2-tuner.[ch] - This is glue logic that resides between this
+    driver and the tuner.ko I2C client driver (which is found
+    elsewhere in V4L).
+
+pvrusb2-util.h - This header defines some common macros used
+    throughout the driver.  These macros are not really specific to
+    the driver, but they had to go somewhere.
+
+pvrusb2-v4l2.[ch] - This is the high level interface which ties the
+    pvrusb2 driver into video4linux.  It is through here that V4L
+    applications can open and operate the driver in the usual V4L
+    ways.  Note that **ALL** V4L functionality is published only
+    through here and nowhere else.
+
+pvrusb2-video-\*.[ch] - This is glue logic that resides between this
+    driver and the saa711x.ko I2C client driver (which is found
+    elsewhere in V4L).  Note that saa711x.ko used to be known as
+    saa7115.ko in ivtv.  There are two versions of this; one is
+    selected depending on the particular saa711[5x].ko that is found.
+
+pvrusb2.h - This header contains compile time tunable parameters
+    (and at the moment the driver has very little that needs to be
+    tuned).
diff --git a/Documentation/driver-api/media/drivers/pxa_camera.rst b/Documentation/driver-api/media/drivers/pxa_camera.rst
new file mode 100644
index 000000000000..ee1bd96b66dd
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/pxa_camera.rst
@@ -0,0 +1,194 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+PXA-Camera Host Driver
+======================
+
+Author: Robert Jarzmik <robert.jarzmik@free.fr>
+
+Constraints
+-----------
+
+a) Image size for YUV422P format
+   All YUV422P images are enforced to have width x height % 16 = 0.
+   This is due to DMA constraints, which transfers only planes of 8 byte
+   multiples.
+
+
+Global video workflow
+---------------------
+
+a) QCI stopped
+   Initially, the QCI interface is stopped.
+   When a buffer is queued (pxa_videobuf_ops->buf_queue), the QCI starts.
+
+b) QCI started
+   More buffers can be queued while the QCI is started without halting the
+   capture.  The new buffers are "appended" at the tail of the DMA chain, and
+   smoothly captured one frame after the other.
+
+   Once a buffer is filled in the QCI interface, it is marked as "DONE" and
+   removed from the active buffers list. It can be then requeud or dequeued by
+   userland application.
+
+   Once the last buffer is filled in, the QCI interface stops.
+
+c) Capture global finite state machine schema
+
+.. code-block:: none
+
+	+----+                             +---+  +----+
+	| DQ |                             | Q |  | DQ |
+	|    v                             |   v  |    v
+	+-----------+                     +------------------------+
+	|   STOP    |                     | Wait for capture start |
+	+-----------+         Q           +------------------------+
+	+-> | QCI: stop | ------------------> | QCI: run               | <------------+
+	|   | DMA: stop |                     | DMA: stop              |              |
+	|   +-----------+             +-----> +------------------------+              |
+	|                            /                            |                   |
+	|                           /             +---+  +----+   |                   |
+	|capture list empty        /              | Q |  | DQ |   | QCI Irq EOF       |
+	|                         /               |   v  |    v   v                   |
+	|   +--------------------+             +----------------------+               |
+	|   | DMA hotlink missed |             |    Capture running   |               |
+	|   +--------------------+             +----------------------+               |
+	|   | QCI: run           |     +-----> | QCI: run             | <-+           |
+	|   | DMA: stop          |    /        | DMA: run             |   |           |
+	|   +--------------------+   /         +----------------------+   | Other     |
+	|     ^                     /DMA still            |               | channels  |
+	|     | capture list       /  running             | DMA Irq End   | not       |
+	|     | not empty         /                       |               | finished  |
+	|     |                  /                        v               | yet       |
+	|   +----------------------+           +----------------------+   |           |
+	|   |  Videobuf released   |           |  Channel completed   |   |           |
+	|   +----------------------+           +----------------------+   |           |
+	+-- | QCI: run             |           | QCI: run             | --+           |
+	| DMA: run             |           | DMA: run             |               |
+	+----------------------+           +----------------------+               |
+		^                      /           |                           |
+		|          no overrun /            | overrun                   |
+		|                    /             v                           |
+	+--------------------+         /   +----------------------+               |
+	|  Frame completed   |        /    |     Frame overran    |               |
+	+--------------------+ <-----+     +----------------------+ restart frame |
+	| QCI: run           |             | QCI: stop            | --------------+
+	| DMA: run           |             | DMA: stop            |
+	+--------------------+             +----------------------+
+
+	Legend: - each box is a FSM state
+		- each arrow is the condition to transition to another state
+		- an arrow with a comment is a mandatory transition (no condition)
+		- arrow "Q" means : a buffer was enqueued
+		- arrow "DQ" means : a buffer was dequeued
+		- "QCI: stop" means the QCI interface is not enabled
+		- "DMA: stop" means all 3 DMA channels are stopped
+		- "DMA: run" means at least 1 DMA channel is still running
+
+DMA usage
+---------
+
+a) DMA flow
+     - first buffer queued for capture
+       Once a first buffer is queued for capture, the QCI is started, but data
+       transfer is not started. On "End Of Frame" interrupt, the irq handler
+       starts the DMA chain.
+     - capture of one videobuffer
+       The DMA chain starts transferring data into videobuffer RAM pages.
+       When all pages are transferred, the DMA irq is raised on "ENDINTR" status
+     - finishing one videobuffer
+       The DMA irq handler marks the videobuffer as "done", and removes it from
+       the active running queue
+       Meanwhile, the next videobuffer (if there is one), is transferred by DMA
+     - finishing the last videobuffer
+       On the DMA irq of the last videobuffer, the QCI is stopped.
+
+b) DMA prepared buffer will have this structure
+
+.. code-block:: none
+
+     +------------+-----+---------------+-----------------+
+     | desc-sg[0] | ... | desc-sg[last] | finisher/linker |
+     +------------+-----+---------------+-----------------+
+
+This structure is pointed by dma->sg_cpu.
+The descriptors are used as follows:
+
+- desc-sg[i]: i-th descriptor, transferring the i-th sg
+  element to the video buffer scatter gather
+- finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
+- linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0
+
+For the next schema, let's assume d0=desc-sg[0] .. dN=desc-sg[N],
+"f" stands for finisher and "l" for linker.
+A typical running chain is :
+
+.. code-block:: none
+
+         Videobuffer 1         Videobuffer 2
+     +---------+----+---+  +----+----+----+---+
+     | d0 | .. | dN | l |  | d0 | .. | dN | f |
+     +---------+----+-|-+  ^----+----+----+---+
+                      |    |
+                      +----+
+
+After the chaining is finished, the chain looks like :
+
+.. code-block:: none
+
+         Videobuffer 1         Videobuffer 2         Videobuffer 3
+     +---------+----+---+  +----+----+----+---+  +----+----+----+---+
+     | d0 | .. | dN | l |  | d0 | .. | dN | l |  | d0 | .. | dN | f |
+     +---------+----+-|-+  ^----+----+----+-|-+  ^----+----+----+---+
+                      |    |                |    |
+                      +----+                +----+
+                                           new_link
+
+c) DMA hot chaining timeslice issue
+
+As DMA chaining is done while DMA _is_ running, the linking may be done
+while the DMA jumps from one Videobuffer to another. On the schema, that
+would be a problem if the following sequence is encountered :
+
+- DMA chain is Videobuffer1 + Videobuffer2
+- pxa_videobuf_queue() is called to queue Videobuffer3
+- DMA controller finishes Videobuffer2, and DMA stops
+
+.. code-block:: none
+
+      =>
+         Videobuffer 1         Videobuffer 2
+     +---------+----+---+  +----+----+----+---+
+     | d0 | .. | dN | l |  | d0 | .. | dN | f |
+     +---------+----+-|-+  ^----+----+----+-^-+
+                      |    |                |
+                      +----+                +-- DMA DDADR loads DDADR_STOP
+
+- pxa_dma_add_tail_buf() is called, the Videobuffer2 "finisher" is
+  replaced by a "linker" to Videobuffer3 (creation of new_link)
+- pxa_videobuf_queue() finishes
+- the DMA irq handler is called, which terminates Videobuffer2
+- Videobuffer3 capture is not scheduled on DMA chain (as it stopped !!!)
+
+.. code-block:: none
+
+         Videobuffer 1         Videobuffer 2         Videobuffer 3
+     +---------+----+---+  +----+----+----+---+  +----+----+----+---+
+     | d0 | .. | dN | l |  | d0 | .. | dN | l |  | d0 | .. | dN | f |
+     +---------+----+-|-+  ^----+----+----+-|-+  ^----+----+----+---+
+                      |    |                |    |
+                      +----+                +----+
+                                           new_link
+                                          DMA DDADR still is DDADR_STOP
+
+- pxa_camera_check_link_miss() is called
+  This checks if the DMA is finished and a buffer is still on the
+  pcdev->capture list. If that's the case, the capture will be restarted,
+  and Videobuffer3 is scheduled on DMA chain.
+- the DMA irq handler finishes
+
+.. note::
+
+     If DMA stops just after pxa_camera_check_link_miss() reads DDADR()
+     value, we have the guarantee that the DMA irq handler will be called back
+     when the DMA will finish the buffer, and pxa_camera_check_link_miss() will
+     be called again, to reschedule Videobuffer3.
diff --git a/Documentation/driver-api/media/drivers/radiotrack.rst b/Documentation/driver-api/media/drivers/radiotrack.rst
new file mode 100644
index 000000000000..a85cb6205db8
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/radiotrack.rst
@@ -0,0 +1,168 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Radiotrack radio driver
+===========================
+
+Author: Stephen M. Benoit <benoits@servicepro.com>
+
+Date:  Dec 14, 1996
+
+ACKNOWLEDGMENTS
+----------------
+
+This document was made based on 'C' code for Linux from Gideon le Grange
+(legrang@active.co.za or legrang@cs.sun.ac.za) in 1994, and elaborations from
+Frans Brinkman (brinkman@esd.nl) in 1996.  The results reported here are from
+experiments that the author performed on his own setup, so your mileage may
+vary... I make no guarantees, claims or warranties to the suitability or
+validity of this information.  No other documentation on the AIMS
+Lab (http://www.aimslab.com/) RadioTrack card was made available to the
+author.  This document is offered in the hopes that it might help users who
+want to use the RadioTrack card in an environment other than MS Windows.
+
+WHY THIS DOCUMENT?
+------------------
+
+I have a RadioTrack card from back when I ran an MS-Windows platform.  After
+converting to Linux, I found Gideon le Grange's command-line software for
+running the card, and found that it was good!  Frans Brinkman made a
+comfortable X-windows interface, and added a scanning feature.  For hack
+value, I wanted to see if the tuner could be tuned beyond the usual FM radio
+broadcast band, so I could pick up the audio carriers from North American
+broadcast TV channels, situated just below and above the 87.0-109.0 MHz range.
+I did not get much success, but I learned about programming ioports under
+Linux and gained some insights about the hardware design used for the card.
+
+So, without further delay, here are the details.
+
+
+PHYSICAL DESCRIPTION
+--------------------
+
+The RadioTrack card is an ISA 8-bit FM radio card.  The radio frequency (RF)
+input is simply an antenna lead, and the output is a power audio signal
+available through a miniature phone plug.  Its RF frequencies of operation are
+more or less limited from 87.0 to 109.0 MHz (the commercial FM broadcast
+band).  Although the registers can be programmed to request frequencies beyond
+these limits, experiments did not give promising results.  The variable
+frequency oscillator (VFO) that demodulates the intermediate frequency (IF)
+signal probably has a small range of useful frequencies, and wraps around or
+gets clipped beyond the limits mentioned above.
+
+
+CONTROLLING THE CARD WITH IOPORT
+--------------------------------
+
+The RadioTrack (base) ioport is configurable for 0x30c or 0x20c.  Only one
+ioport seems to be involved.  The ioport decoding circuitry must be pretty
+simple, as individual ioport bits are directly matched to specific functions
+(or blocks) of the radio card.  This way, many functions can be changed in
+parallel with one write to the ioport.  The only feedback available through
+the ioports appears to be the "Stereo Detect" bit.
+
+The bits of the ioport are arranged as follows:
+
+.. code-block:: none
+
+	MSb                                                         LSb
+	+------+------+------+--------+--------+-------+---------+--------+
+	| VolA | VolB | ???? | Stereo | Radio  | TuneA | TuneB   | Tune   |
+	|  (+) |  (-) |      | Detect | Audio  | (bit) | (latch) | Update |
+	|      |      |      | Enable | Enable |       |         | Enable |
+	+------+------+------+--------+--------+-------+---------+--------+
+
+
+====  ====  =================================
+VolA  VolB  Description
+====  ====  =================================
+0	 0  audio mute
+0	 1  volume +    (some delay required)
+1	 0  volume -    (some delay required)
+1	 1  stay at present volume
+====  ====  =================================
+
+====================	===========
+Stereo Detect Enable	Description
+====================	===========
+0			No Detect
+1			Detect
+====================	===========
+
+Results available by reading ioport >60 msec after last port write.
+
+  0xff ==> no stereo detected,  0xfd ==> stereo detected.
+
+=============================	=============================
+Radio to Audio (path) Enable	Description
+=============================	=============================
+0				Disable path (silence)
+1				Enable path  (audio produced)
+=============================	=============================
+
+=====  =====  ==================
+TuneA  TuneB  Description
+=====  =====  ==================
+0	0     "zero" bit phase 1
+0	1     "zero" bit phase 2
+1	0     "one" bit phase 1
+1	1     "one" bit phase 2
+=====  =====  ==================
+
+
+24-bit code, where bits = (freq*40) + 10486188.
+The Most Significant 11 bits must be 1010 xxxx 0x0 to be valid.
+The bits are shifted in LSb first.
+
+==================	===========================
+Tune Update Enable	Description
+==================	===========================
+0			Tuner held constant
+1			Tuner updating in progress
+==================	===========================
+
+
+PROGRAMMING EXAMPLES
+--------------------
+
+.. code-block:: none
+
+	Default:        BASE <-- 0xc8  (current volume, no stereo detect,
+					radio enable, tuner adjust disable)
+
+	Card Off:	BASE <-- 0x00  (audio mute, no stereo detect,
+					radio disable, tuner adjust disable)
+
+	Card On:	BASE <-- 0x00  (see "Card Off", clears any unfinished business)
+			BASE <-- 0xc8  (see "Default")
+
+	Volume Down:    BASE <-- 0x48  (volume down, no stereo detect,
+					radio enable, tuner adjust disable)
+			wait 10 msec
+			BASE <-- 0xc8  (see "Default")
+
+	Volume Up:      BASE <-- 0x88  (volume up, no stereo detect,
+					radio enable, tuner adjust disable)
+			wait 10 msec
+			BASE <-- 0xc8  (see "Default")
+
+	Check Stereo:   BASE <-- 0xd8  (current volume, stereo detect,
+					radio enable, tuner adjust disable)
+			wait 100 msec
+			x <-- BASE     (read ioport)
+			BASE <-- 0xc8  (see "Default")
+
+			x=0xff ==> "not stereo", x=0xfd ==> "stereo detected"
+
+	Set Frequency:  code = (freq*40) + 10486188
+			foreach of the 24 bits in code,
+			(from Least to Most Significant):
+			to write a "zero" bit,
+			BASE <-- 0x01  (audio mute, no stereo detect, radio
+					disable, "zero" bit phase 1, tuner adjust)
+			BASE <-- 0x03  (audio mute, no stereo detect, radio
+					disable, "zero" bit phase 2, tuner adjust)
+			to write a "one" bit,
+			BASE <-- 0x05  (audio mute, no stereo detect, radio
+					disable, "one" bit phase 1, tuner adjust)
+			BASE <-- 0x07  (audio mute, no stereo detect, radio
+					disable, "one" bit phase 2, tuner adjust)
diff --git a/Documentation/driver-api/media/drivers/saa7134-devel.rst b/Documentation/driver-api/media/drivers/saa7134-devel.rst
new file mode 100644
index 000000000000..167fd729bc8c
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/saa7134-devel.rst
@@ -0,0 +1,67 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The saa7134 driver
+==================
+
+Author Gerd Hoffmann
+
+
+Card Variations:
+----------------
+
+Cards can use either of these two crystals (xtal):
+
+- 32.11 MHz -> .audio_clock=0x187de7
+- 24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600)
+
+Some details about 30/34/35:
+
+- saa7130 - low-price chip, doesn't have mute, that is why all those
+  cards should have .mute field defined in their tuner structure.
+
+- saa7134 - usual chip
+
+- saa7133/35 - saa7135 is probably a marketing decision, since all those
+  chips identifies itself as 33 on pci.
+
+LifeView GPIOs
+--------------
+
+This section was authored by: Peter Missel <peter.missel@onlinehome.de>
+
+- LifeView FlyTV Platinum FM (LR214WF)
+
+    - GP27    MDT2005 PB4 pin 10
+    - GP26    MDT2005 PB3 pin 9
+    - GP25    MDT2005 PB2 pin 8
+    - GP23    MDT2005 PB1 pin 7
+    - GP22    MDT2005 PB0 pin 6
+    - GP21    MDT2005 PB5 pin 11
+    - GP20    MDT2005 PB6 pin 12
+    - GP19    MDT2005 PB7 pin 13
+    - nc      MDT2005 PA3 pin 2
+    - Remote  MDT2005 PA2 pin 1
+    - GP18    MDT2005 PA1 pin 18
+    - nc      MDT2005 PA0 pin 17 strap low
+    - GP17    Strap "GP7"=High
+    - GP16    Strap "GP6"=High
+
+	- 0=Radio 1=TV
+	- Drives SA630D ENCH1 and HEF4052 A1 pinsto do FM radio through
+	  SIF input
+
+    - GP15    nc
+    - GP14    nc
+    - GP13    nc
+    - GP12    Strap "GP5" = High
+    - GP11    Strap "GP4" = High
+    - GP10    Strap "GP3" = High
+    - GP09    Strap "GP2" = Low
+    - GP08    Strap "GP1" = Low
+    - GP07.00 nc
+
+Credits
+-------
+
+andrew.stevens@philips.com + werner.leeb@philips.com for providing
+saa7134 hardware specs and sample board.
diff --git a/Documentation/driver-api/media/drivers/sh_mobile_ceu_camera.rst b/Documentation/driver-api/media/drivers/sh_mobile_ceu_camera.rst
new file mode 100644
index 000000000000..822fcb8368ae
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/sh_mobile_ceu_camera.rst
@@ -0,0 +1,142 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver
+=======================================================================
+
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+Terminology
+-----------
+
+sensor scales: horizontal and vertical scales, configured by the sensor driver
+host scales: -"- host driver
+combined scales: sensor_scale * host_scale
+
+
+Generic scaling / cropping scheme
+---------------------------------
+
+.. code-block:: none
+
+	-1--
+	|
+	-2-- -\
+	|      --\
+	|         --\
+	+-5-- .      -- -3-- -\
+	|      `...            -\
+	|          `... -4-- .   - -7..
+	|                     `.
+	|                       `. .6--
+	|
+	|                        . .6'-
+	|                      .´
+	|           ... -4'- .´
+	|       ...´             - -7'.
+	+-5'- .´               -/
+	|            -- -3'- -/
+	|         --/
+	|      --/
+	-2'- -/
+	|
+	|
+	-1'-
+
+In the above chart minuses and slashes represent "real" data amounts, points and
+accents represent "useful" data, basically, CEU scaled and cropped output,
+mapped back onto the client's source plane.
+
+Such a configuration can be produced by user requests:
+
+S_CROP(left / top = (5) - (1), width / height = (5') - (5))
+S_FMT(width / height = (6') - (6))
+
+Here:
+
+(1) to (1') - whole max width or height
+(1) to (2)  - sensor cropped left or top
+(2) to (2') - sensor cropped width or height
+(3) to (3') - sensor scale
+(3) to (4)  - CEU cropped left or top
+(4) to (4') - CEU cropped width or height
+(5) to (5') - reverse sensor scale applied to CEU cropped width or height
+(2) to (5)  - reverse sensor scale applied to CEU cropped left or top
+(6) to (6') - CEU scale - user window
+
+
+S_FMT
+-----
+
+Do not touch input rectangle - it is already optimal.
+
+1. Calculate current sensor scales:
+
+	scale_s = ((2') - (2)) / ((3') - (3))
+
+2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
+current sensor scales onto input window - this is user S_CROP:
+
+	width_u = (5') - (5) = ((4') - (4)) * scale_s
+
+3. Calculate new combined scales from "effective" input window to requested user
+window:
+
+	scale_comb = width_u / ((6') - (6))
+
+4. Calculate sensor output window by applying combined scales to real input
+window:
+
+	width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb
+
+5. Apply iterative sensor S_FMT for sensor output window.
+
+	subdev->video_ops->s_fmt(.width = width_s_out)
+
+6. Retrieve sensor output window (g_fmt)
+
+7. Calculate new sensor scales:
+
+	scale_s_new = ((3')_new - (3)_new) / ((2') - (2))
+
+8. Calculate new CEU crop - apply sensor scales to previously calculated
+"effective" crop:
+
+	width_ceu = (4')_new - (4)_new = width_u / scale_s_new
+	left_ceu = (4)_new - (3)_new = ((5) - (2)) / scale_s_new
+
+9. Use CEU cropping to crop to the new window:
+
+	ceu_crop(.width = width_ceu, .left = left_ceu)
+
+10. Use CEU scaling to scale to the requested user window:
+
+	scale_ceu = width_ceu / width
+
+
+S_CROP
+------
+
+The :ref:`V4L2 crop API <crop-scale>` says:
+
+"...specification does not define an origin or units. However by convention
+drivers should horizontally count unscaled samples relative to 0H."
+
+We choose to follow the advise and interpret cropping units as client input
+pixels.
+
+Cropping is performed in the following 6 steps:
+
+1. Request exactly user rectangle from the sensor.
+
+2. If smaller - iterate until a larger one is obtained. Result: sensor cropped
+   to 2 : 2', target crop 5 : 5', current output format 6' - 6.
+
+3. In the previous step the sensor has tried to preserve its output frame as
+   good as possible, but it could have changed. Retrieve it again.
+
+4. Sensor scaled to 3 : 3'. Sensor's scale is (2' - 2) / (3' - 3). Calculate
+   intermediate window: 4' - 4 = (5' - 5) * (3' - 3) / (2' - 2)
+
+5. Calculate and apply host scale = (6' - 6) / (4' - 4)
+
+6. Calculate and apply host crop: 6 - 7 = (5 - 2) * (6' - 6) / (5' - 5)
diff --git a/Documentation/driver-api/media/drivers/tuners.rst b/Documentation/driver-api/media/drivers/tuners.rst
new file mode 100644
index 000000000000..7509be888909
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/tuners.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Tuner drivers
+=============
+
+Simple tuner Programming
+------------------------
+
+There are some flavors of Tuner programming APIs.
+These differ mainly by the bandswitch byte.
+
+- L= LG_API       (VHF_LO=0x01, VHF_HI=0x02, UHF=0x08, radio=0x04)
+- P= PHILIPS_API  (VHF_LO=0xA0, VHF_HI=0x90, UHF=0x30, radio=0x04)
+- T= TEMIC_API    (VHF_LO=0x02, VHF_HI=0x04, UHF=0x01)
+- A= ALPS_API     (VHF_LO=0x14, VHF_HI=0x12, UHF=0x11)
+- M= PHILIPS_MK3  (VHF_LO=0x01, VHF_HI=0x02, UHF=0x04, radio=0x19)
+
+Tuner Manufacturers
+-------------------
+
+- SAMSUNG Tuner identification: (e.g. TCPM9091PD27)
+
+.. code-block:: none
+
+ TCP [ABCJLMNQ] 90[89][125] [DP] [ACD] 27 [ABCD]
+ [ABCJLMNQ]:
+   A= BG+DK
+   B= BG
+   C= I+DK
+   J= NTSC-Japan
+   L= Secam LL
+   M= BG+I+DK
+   N= NTSC
+   Q= BG+I+DK+LL
+ [89]: ?
+ [125]:
+   2: No FM
+   5: With FM
+ [DP]:
+   D= NTSC
+   P= PAL
+ [ACD]:
+   A= F-connector
+   C= Phono connector
+   D= Din Jack
+ [ABCD]:
+   3-wire/I2C tuning, 2-band/3-band
+
+These Tuners are PHILIPS_API compatible.
+
+Philips Tuner identification: (e.g. FM1216MF)
+
+.. code-block:: none
+
+  F[IRMQ]12[1345]6{MF|ME|MP}
+  F[IRMQ]:
+   FI12x6: Tuner Series
+   FR12x6: Tuner + Radio IF
+   FM12x6: Tuner + FM
+   FQ12x6: special
+   FMR12x6: special
+   TD15xx: Digital Tuner ATSC
+  12[1345]6:
+   1216: PAL BG
+   1236: NTSC
+   1246: PAL I
+   1256: Pal DK
+  {MF|ME|MP}
+   MF: BG LL w/ Secam (Multi France)
+   ME: BG DK I LL   (Multi Europe)
+   MP: BG DK I      (Multi PAL)
+   MR: BG DK M (?)
+   MG: BG DKI M (?)
+  MK2 series PHILIPS_API, most tuners are compatible to this one !
+  MK3 series introduced in 2002 w/ PHILIPS_MK3_API
+
+Temic Tuner identification: (.e.g 4006FH5)
+
+.. code-block:: none
+
+   4[01][0136][269]F[HYNR]5
+    40x2: Tuner (5V/33V), TEMIC_API.
+    40x6: Tuner 5V
+    41xx: Tuner compact
+    40x9: Tuner+FM compact
+   [0136]
+    xx0x: PAL BG
+    xx1x: Pal DK, Secam LL
+    xx3x: NTSC
+    xx6x: PAL I
+   F[HYNR]5
+    FH5: Pal BG
+    FY5: others
+    FN5: multistandard
+    FR5: w/ FM radio
+   3X xxxx: order number with specific connector
+  Note: Only 40x2 series has TEMIC_API, all newer tuners have PHILIPS_API.
+
+LG Innotek Tuner:
+
+- TPI8NSR11 : NTSC J/M    (TPI8NSR01 w/FM)  (P,210/497)
+- TPI8PSB11 : PAL B/G     (TPI8PSB01 w/FM)  (P,170/450)
+- TAPC-I701 : PAL I       (TAPC-I001 w/FM)  (P,170/450)
+- TPI8PSB12 : PAL D/K+B/G (TPI8PSB02 w/FM)  (P,170/450)
+- TAPC-H701P: NTSC_JP     (TAPC-H001P w/FM) (L,170/450)
+- TAPC-G701P: PAL B/G     (TAPC-G001P w/FM) (L,170/450)
+- TAPC-W701P: PAL I       (TAPC-W001P w/FM) (L,170/450)
+- TAPC-Q703P: PAL D/K     (TAPC-Q001P w/FM) (L,170/450)
+- TAPC-Q704P: PAL D/K+I   (L,170/450)
+- TAPC-G702P: PAL D/K+B/G (L,170/450)
+
+- TADC-H002F: NTSC (L,175/410?; 2-B, C-W+11, W+12-69)
+- TADC-M201D: PAL D/K+B/G+I (L,143/425)  (sound control at I2C address 0xc8)
+- TADC-T003F: NTSC Taiwan  (L,175/410?; 2-B, C-W+11, W+12-69)
+
+Suffix:
+  - P= Standard phono female socket
+  - D= IEC female socket
+  - F= F-connector
+
+Other Tuners:
+
+- TCL2002MB-1 : PAL BG + DK       =TUNER_LG_PAL_NEW_TAPC
+- TCL2002MB-1F: PAL BG + DK w/FM  =PHILIPS_PAL
+- TCL2002MI-2 : PAL I		= ??
+
+ALPS Tuners:
+
+- Most are LG_API compatible
+- TSCH6 has ALPS_API (TSCH5 ?)
+- TSBE1 has extra API 05,02,08 Control_byte=0xCB Source:[#f1]_
+
+.. [#f1] conexant100029b-PCI-Decoder-ApplicationNote.pdf
diff --git a/Documentation/driver-api/media/drivers/vimc-devel.rst b/Documentation/driver-api/media/drivers/vimc-devel.rst
new file mode 100644
index 000000000000..9e984f914b13
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/vimc-devel.rst
@@ -0,0 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual Media Controller Driver (vimc)
+==========================================
+
+Source code documentation
+-------------------------
+
+vimc-streamer
+~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/media/test-drivers/vimc/vimc-streamer.h
+   :internal:
+
+.. kernel-doc:: drivers/media/test-drivers/vimc/vimc-streamer.c
diff --git a/Documentation/driver-api/media/dtv-ca.rst b/Documentation/driver-api/media/dtv-ca.rst
new file mode 100644
index 000000000000..8a09862b428b
--- /dev/null
+++ b/Documentation/driver-api/media/dtv-ca.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Digital TV Conditional Access kABI
+----------------------------------
+
+.. kernel-doc:: include/media/dvb_ca_en50221.h
diff --git a/Documentation/driver-api/media/dtv-common.rst b/Documentation/driver-api/media/dtv-common.rst
new file mode 100644
index 000000000000..f8b2c4dc8170
--- /dev/null
+++ b/Documentation/driver-api/media/dtv-common.rst
@@ -0,0 +1,62 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Digital TV Common functions
+---------------------------
+
+Math functions
+~~~~~~~~~~~~~~
+
+Provide some commonly-used math functions, usually required in order to
+estimate signal strength and signal to noise measurements in dB.
+
+.. kernel-doc:: include/media/dvb_math.h
+
+
+DVB devices
+~~~~~~~~~~~
+
+Those functions are responsible for handling the DVB device nodes.
+
+.. kernel-doc:: include/media/dvbdev.h
+
+Digital TV Ring buffer
+~~~~~~~~~~~~~~~~~~~~~~
+
+Those routines implement ring buffers used to handle digital TV data and
+copy it from/to userspace.
+
+.. note::
+
+  1) For performance reasons read and write routines don't check buffer sizes
+     and/or number of bytes free/available. This has to be done before these
+     routines are called. For example:
+
+   .. code-block:: c
+
+        /* write @buflen: bytes */
+        free = dvb_ringbuffer_free(rbuf);
+        if (free >= buflen)
+                count = dvb_ringbuffer_write(rbuf, buffer, buflen);
+        else
+                /* do something */
+
+        /* read min. 1000, max. @bufsize: bytes */
+        avail = dvb_ringbuffer_avail(rbuf);
+        if (avail >= 1000)
+                count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize));
+        else
+                /* do something */
+
+  2) If there is exactly one reader and one writer, there is no need
+     to lock read or write operations.
+     Two or more readers must be locked against each other.
+     Flushing the buffer counts as a read operation.
+     Resetting the buffer counts as a read and write operation.
+     Two or more writers must be locked against each other.
+
+.. kernel-doc:: include/media/dvb_ringbuffer.h
+
+Digital TV VB2 handler
+~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: include/media/dvb_vb2.h
diff --git a/Documentation/driver-api/media/dtv-core.rst b/Documentation/driver-api/media/dtv-core.rst
new file mode 100644
index 000000000000..82c5b85ed9b1
--- /dev/null
+++ b/Documentation/driver-api/media/dtv-core.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Digital TV (DVB) devices
+------------------------
+
+Digital TV devices are implemented by several different drivers:
+
+- A bridge driver that is responsible to talk with the bus where the other
+  devices are connected (PCI, USB, SPI), bind to the other drivers and
+  implement the digital demux logic (either in software or in hardware);
+
+- Frontend drivers that are usually implemented as two separate drivers:
+
+  - A tuner driver that implements the logic which commands the part of
+    the hardware responsible for tuning into a digital TV transponder or
+    physical channel. The output of a tuner is usually a baseband or
+    Intermediate Frequency (IF) signal;
+
+  - A demodulator driver (a.k.a "demod") that implements the logic which
+    commands the digital TV decoding hardware. The output of a demod is
+    a digital stream, with multiple audio, video and data channels typically
+    multiplexed using MPEG Transport Stream [#f1]_.
+
+On most hardware, the frontend drivers talk with the bridge driver using an
+I2C bus.
+
+.. [#f1] Some standards use TCP/IP for multiplexing data, like DVB-H (an
+   abandoned standard, not used anymore) and ATSC version 3.0 current
+   proposals. Currently, the DVB subsystem doesn't implement those standards.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    dtv-common
+    dtv-frontend
+    dtv-demux
+    dtv-ca
+    dtv-net
diff --git a/Documentation/driver-api/media/dtv-demux.rst b/Documentation/driver-api/media/dtv-demux.rst
new file mode 100644
index 000000000000..c0ae5dec5328
--- /dev/null
+++ b/Documentation/driver-api/media/dtv-demux.rst
@@ -0,0 +1,84 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Digital TV Demux kABI
+---------------------
+
+Digital TV Demux
+~~~~~~~~~~~~~~~~
+
+The Kernel Digital TV Demux kABI defines a driver-internal interface for
+registering low-level, hardware specific driver to a hardware independent
+demux layer. It is only of interest for Digital TV device driver writers.
+The header file for this kABI is named ``demux.h`` and located in
+``include/media``.
+
+The demux kABI should be implemented for each demux in the system. It is
+used to select the TS source of a demux and to manage the demux resources.
+When the demux client allocates a resource via the demux kABI, it receives
+a pointer to the kABI of that resource.
+
+Each demux receives its TS input from a DVB front-end or from memory, as
+set via this demux kABI. In a system with more than one front-end, the kABI
+can be used to select one of the DVB front-ends as a TS source for a demux,
+unless this is fixed in the HW platform.
+
+The demux kABI only controls front-ends regarding to their connections with
+demuxes; the kABI used to set the other front-end parameters, such as
+tuning, are devined via the Digital TV Frontend kABI.
+
+The functions that implement the abstract interface demux should be defined
+static or module private and registered to the Demux core for external
+access. It is not necessary to implement every function in the struct
+:c:type:`dmx_demux`. For example, a demux interface might support Section filtering,
+but not PES filtering. The kABI client is expected to check the value of any
+function pointer before calling the function: the value of ``NULL`` means
+that the function is not available.
+
+Whenever the functions of the demux API modify shared data, the
+possibilities of lost update and race condition problems should be
+addressed, e.g. by protecting parts of code with mutexes.
+
+Note that functions called from a bottom half context must not sleep.
+Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a
+kernel thread being put to sleep if swapping is needed. For example, the
+Linux Kernel calls the functions of a network device interface from a
+bottom half context. Thus, if a demux kABI function is called from network
+device code, the function must not sleep.
+
+Demux Callback API
+~~~~~~~~~~~~~~~~~~
+
+This kernel-space API comprises the callback functions that deliver filtered
+data to the demux client. Unlike the other DVB kABIs, these functions are
+provided by the client and called from the demux code.
+
+The function pointers of this abstract interface are not packed into a
+structure as in the other demux APIs, because the callback functions are
+registered and used independent of each other. As an example, it is possible
+for the API client to provide several callback functions for receiving TS
+packets and no callbacks for PES packets or sections.
+
+The functions that implement the callback API need not be re-entrant: when
+a demux driver calls one of these functions, the driver is not allowed to
+call the function again before the original call returns. If a callback is
+triggered by a hardware interrupt, it is recommended to use the Linux
+bottom half mechanism or start a tasklet instead of making the callback
+function call directly from a hardware interrupt.
+
+This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()`
+callbacks.
+
+Digital TV Demux device registration functions and data structures
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: include/media/dmxdev.h
+
+High-level Digital TV demux interface
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: include/media/dvb_demux.h
+
+Driver-internal low-level hardware specific driver demux interface
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: include/media/demux.h
diff --git a/Documentation/driver-api/media/dtv-frontend.rst b/Documentation/driver-api/media/dtv-frontend.rst
new file mode 100644
index 000000000000..b362109bb131
--- /dev/null
+++ b/Documentation/driver-api/media/dtv-frontend.rst
@@ -0,0 +1,445 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Digital TV Frontend kABI
+------------------------
+
+Digital TV Frontend
+~~~~~~~~~~~~~~~~~~~
+
+The Digital TV Frontend kABI defines a driver-internal interface for
+registering low-level, hardware specific driver to a hardware independent
+frontend layer. It is only of interest for Digital TV device driver writers.
+The header file for this API is named ``dvb_frontend.h`` and located in
+``include/media/``.
+
+Demodulator driver
+^^^^^^^^^^^^^^^^^^
+
+The demodulator driver is responsible for talking with the decoding part of the
+hardware. Such driver should implement :c:type:`dvb_frontend_ops`, which
+tells what type of digital TV standards are supported, and points to a
+series of functions that allow the DVB core to command the hardware via
+the code under ``include/media/dvb_frontend.c``.
+
+A typical example of such struct in a driver ``foo`` is::
+
+	static struct dvb_frontend_ops foo_ops = {
+		.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
+		.info = {
+			.name	= "foo DVB-T/T2/C driver",
+			.caps = FE_CAN_FEC_1_2 |
+				FE_CAN_FEC_2_3 |
+				FE_CAN_FEC_3_4 |
+				FE_CAN_FEC_5_6 |
+				FE_CAN_FEC_7_8 |
+				FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK |
+				FE_CAN_QAM_16 |
+				FE_CAN_QAM_32 |
+				FE_CAN_QAM_64 |
+				FE_CAN_QAM_128 |
+				FE_CAN_QAM_256 |
+				FE_CAN_QAM_AUTO |
+				FE_CAN_TRANSMISSION_MODE_AUTO |
+				FE_CAN_GUARD_INTERVAL_AUTO |
+				FE_CAN_HIERARCHY_AUTO |
+				FE_CAN_MUTE_TS |
+				FE_CAN_2G_MODULATION,
+			.frequency_min = 42000000, /* Hz */
+			.frequency_max = 1002000000, /* Hz */
+			.symbol_rate_min = 870000,
+			.symbol_rate_max = 11700000
+		},
+		.init = foo_init,
+		.sleep = foo_sleep,
+		.release = foo_release,
+		.set_frontend = foo_set_frontend,
+		.get_frontend = foo_get_frontend,
+		.read_status = foo_get_status_and_stats,
+		.tune = foo_tune,
+		.i2c_gate_ctrl = foo_i2c_gate_ctrl,
+		.get_frontend_algo = foo_get_algo,
+	};
+
+A typical example of such struct in a driver ``bar`` meant to be used on
+Satellite TV reception is::
+
+	static const struct dvb_frontend_ops bar_ops = {
+		.delsys = { SYS_DVBS, SYS_DVBS2 },
+		.info = {
+			.name		= "Bar DVB-S/S2 demodulator",
+			.frequency_min	= 500000, /* KHz */
+			.frequency_max	= 2500000, /* KHz */
+			.frequency_stepsize	= 0,
+			.symbol_rate_min = 1000000,
+			.symbol_rate_max = 45000000,
+			.symbol_rate_tolerance = 500,
+			.caps = FE_CAN_INVERSION_AUTO |
+				FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK,
+		},
+		.init = bar_init,
+		.sleep = bar_sleep,
+		.release = bar_release,
+		.set_frontend = bar_set_frontend,
+		.get_frontend = bar_get_frontend,
+		.read_status = bar_get_status_and_stats,
+		.i2c_gate_ctrl = bar_i2c_gate_ctrl,
+		.get_frontend_algo = bar_get_algo,
+		.tune = bar_tune,
+
+		/* Satellite-specific */
+		.diseqc_send_master_cmd = bar_send_diseqc_msg,
+		.diseqc_send_burst = bar_send_burst,
+		.set_tone = bar_set_tone,
+		.set_voltage = bar_set_voltage,
+	};
+
+.. note::
+
+   #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the
+      frequencies are specified in kHz, while, for terrestrial and cable
+      standards, they're specified in Hz. Due to that, if the same frontend
+      supports both types, you'll need to have two separate
+      :c:type:`dvb_frontend_ops` structures, one for each standard.
+   #) The ``.i2c_gate_ctrl`` field is present only when the hardware has
+      allows controlling an I2C gate (either directly of via some GPIO pin),
+      in order to remove the tuner from the I2C bus after a channel is
+      tuned.
+   #) All new drivers should implement the
+      :ref:`DVBv5 statistics <dvbv5_stats>` via ``.read_status``.
+      Yet, there are a number of callbacks meant to get statistics for
+      signal strength, S/N and UCB. Those are there to provide backward
+      compatibility with legacy applications that don't support the DVBv5
+      API. Implementing those callbacks are optional. Those callbacks may be
+      removed in the future, after we have all existing drivers supporting
+      DVBv5 stats.
+   #) Other callbacks are required for satellite TV standards, in order to
+      control LNBf and DiSEqC: ``.diseqc_send_master_cmd``,
+      ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``.
+
+.. |delta|   unicode:: U+00394
+
+The ``include/media/dvb_frontend.c`` has a kernel thread which is
+responsible for tuning the device. It supports multiple algorithms to
+detect a channel, as defined at enum :c:func:`dvbfe_algo`.
+
+The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver
+doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to
+``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning,
+e. g. it will try first to use the specified center frequency ``f``,
+then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|,
+``f`` - 2 x |delta| and so on.
+
+If the hardware has internally a some sort of zigzag algorithm, you should
+define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``.
+
+.. note::
+
+   The core frontend support also supports
+   a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to
+   define its own hardware-assisted algorithm. Very few hardware need to
+   use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other
+   function callbacks at struct :c:type:`dvb_frontend_ops`.
+
+Attaching frontend driver to the bridge driver
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Before using the Digital TV frontend core, the bridge driver should attach
+the frontend demod, tuner and SEC devices and call
+:c:func:`dvb_register_frontend()`,
+in order to register the new frontend at the subsystem. At device
+detach/removal, the bridge driver should call
+:c:func:`dvb_unregister_frontend()` to
+remove the frontend from the core and then :c:func:`dvb_frontend_detach()`
+to free the memory allocated by the frontend drivers.
+
+The drivers should also call :c:func:`dvb_frontend_suspend()` as part of
+their handler for the :c:type:`device_driver`.\ ``suspend()``, and
+:c:func:`dvb_frontend_resume()` as
+part of their handler for :c:type:`device_driver`.\ ``resume()``.
+
+A few other optional functions are provided to handle some special cases.
+
+.. _dvbv5_stats:
+
+Digital TV Frontend statistics
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Introduction
+^^^^^^^^^^^^
+
+Digital TV frontends provide a range of
+:ref:`statistics <frontend-stat-properties>` meant to help tuning the device
+and measuring the quality of service.
+
+For each statistics measurement, the driver should set the type of scale used,
+or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given
+time. Drivers should also provide the number of statistics for each type.
+that's usually 1 for most video standards [#f2]_.
+
+Drivers should initialize each statistic counters with length and
+scale at its init code. For example, if the frontend provides signal
+strength, it should have, on its init code::
+
+	struct dtv_frontend_properties *c = &state->fe.dtv_property_cache;
+
+	c->strength.len = 1;
+	c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+And, when the statistics got updated, set the scale::
+
+	c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+	c->strength.stat[0].uvalue = strength;
+
+.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer
+   set of statistics. On such cases, len should be equal to 4. The first
+   value corresponds to the global stat; the other ones to each layer, e. g.:
+
+   - c->cnr.stat[0] for global S/N carrier ratio,
+   - c->cnr.stat[1] for Layer A S/N carrier ratio,
+   - c->cnr.stat[2] for layer B S/N carrier ratio,
+   - c->cnr.stat[3] for layer C S/N carrier ratio.
+
+.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of
+   ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements.
+
+Groups of statistics
+^^^^^^^^^^^^^^^^^^^^
+
+There are several groups of statistics currently supported:
+
+Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
+  - Measures the signal strength level at the analog part of the tuner or
+    demod.
+
+  - Typically obtained from the gain applied to the tuner and/or frontend
+    in order to detect the carrier. When no carrier is detected, the gain is
+    at the maximum value (so, strength is on its minimal).
+
+  - As the gain is visible through the set of registers that adjust the gain,
+    typically, this statistics is always available [#f3]_.
+
+  - Drivers should try to make it available all the times, as these statistics
+    can be used when adjusting an antenna position and to check for troubles
+    at the cabling.
+
+  .. [#f3] On a few devices, the gain keeps floating if there is no carrier.
+     On such devices, strength report should check first if carrier is
+     detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
+     and otherwise return the lowest possible value.
+
+Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
+  - Signal to Noise ratio for the main carrier.
+
+  - Signal to Noise measurement depends on the device. On some hardware, it is
+    available when the main carrier is detected. On those hardware, CNR
+    measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
+    see :c:type:`fe_status`).
+
+    On other devices, it requires inner FEC decoding,
+    as the frontend measures it indirectly from other parameters (e. g. after
+    ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+    Having it available after inner FEC is more common.
+
+Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`)
+  - Those counters measure the number of bits and bit errors errors after
+    the forward error correction (FEC) on the inner coding block
+    (after Viterbi, LDPC or other inner code).
+
+  - Due to its nature, those statistics depend on full coding lock
+    (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``,
+    see :c:type:`fe_status`).
+
+Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`)
+  - Those counters measure the number of bits and bit errors errors before
+    the forward error correction (FEC) on the inner coding block
+    (before Viterbi, LDPC or other inner code).
+
+  - Not all frontends provide this kind of statistics.
+
+  - Due to its nature, those statistics depend on inner coding lock (e. g.
+    after ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`)
+  - Those counters measure the number of blocks and block errors errors after
+    the forward error correction (FEC) on the inner coding block
+    (before Viterbi, LDPC or other inner code).
+
+  - Due to its nature, those statistics depend on full coding lock
+    (e. g. after ``FE_HAS_SYNC`` or after
+    ``FE_HAS_LOCK``, see :c:type:`fe_status`).
+
+.. note:: All counters should be monotonically increased as they're
+   collected from the hardware.
+
+A typical example of the logic that handle status and statistics is::
+
+	static int foo_get_status_and_stats(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+		int rc;
+		enum fe_status *status;
+
+		/* Both status and strength are always available */
+		rc = foo_read_status(fe, &status);
+		if (rc < 0)
+			return rc;
+
+		rc = foo_read_strength(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if CNR is available */
+		if (!(fe->status & FE_HAS_CARRIER))
+			return 0;
+
+		rc = foo_read_cnr(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if pre-BER stats are available */
+		if (!(fe->status & FE_HAS_VITERBI))
+			return 0;
+
+		rc = foo_get_pre_ber(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if post-BER stats are available */
+		if (!(fe->status & FE_HAS_SYNC))
+			return 0;
+
+		rc = foo_get_post_ber(fe);
+		if (rc < 0)
+			return rc;
+	}
+
+	static const struct dvb_frontend_ops ops = {
+		/* ... */
+		.read_status = foo_get_status_and_stats,
+	};
+
+Statistics collection
+^^^^^^^^^^^^^^^^^^^^^
+
+On almost all frontend hardware, the bit and byte counts are stored by
+the hardware after a certain amount of time or after the total bit/block
+counter reaches a certain value (usually programmable), for example, on
+every 1000 ms or after receiving 1,000,000 bits.
+
+So, if you read the registers too soon, you'll end by reading the same
+value as in the previous reading, causing the monotonic value to be
+incremented too often.
+
+Drivers should take the responsibility to avoid too often reads. That
+can be done using two approaches:
+
+if the driver have a bit that indicates when a collected data is ready
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+Driver should check such bit before making the statistics available.
+
+An example of such behavior can be found at this code snippet (adapted
+from mb86a20s driver's logic)::
+
+	static int foo_get_pre_ber(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+		int rc, bit_error;
+
+		/* Check if the BER measures are already available */
+		rc = foo_read_u8(state, 0x54);
+		if (rc < 0)
+			return rc;
+
+		if (!rc)
+			return 0;
+
+		/* Read Bit Error Count */
+		bit_error = foo_read_u32(state, 0x55);
+		if (bit_error < 0)
+			return bit_error;
+
+		/* Read Total Bit Count */
+		rc = foo_read_u32(state, 0x51);
+		if (rc < 0)
+			return rc;
+
+		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_error.stat[0].uvalue += bit_error;
+		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_count.stat[0].uvalue += rc;
+
+		return 0;
+	}
+
+If the driver doesn't provide a statistics available check bit
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+A few devices, however, may not provide a way to check if the stats are
+available (or the way to check it is unknown). They may not even provide
+a way to directly read the total number of bits or blocks.
+
+On those devices, the driver need to ensure that it won't be reading from
+the register too often and/or estimate the total number of bits/blocks.
+
+On such drivers, a typical routine to get statistics would be like
+(adapted from dib8000 driver's logic)::
+
+	struct foo_state {
+		/* ... */
+
+		unsigned long per_jiffies_stats;
+	}
+
+	static int foo_get_pre_ber(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+		int rc, bit_error;
+		u64 bits;
+
+		/* Check if time for stats was elapsed */
+		if (!time_after(jiffies, state->per_jiffies_stats))
+			return 0;
+
+		/* Next stat should be collected in 1000 ms */
+		state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
+
+		/* Read Bit Error Count */
+		bit_error = foo_read_u32(state, 0x55);
+		if (bit_error < 0)
+			return bit_error;
+
+		/*
+		 * On this particular frontend, there's no register that
+		 * would provide the number of bits per 1000ms sample. So,
+		 * some function would calculate it based on DTV properties
+		 */
+		bits = get_number_of_bits_per_1000ms(fe);
+
+		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_error.stat[0].uvalue += bit_error;
+		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_count.stat[0].uvalue += bits;
+
+		return 0;
+	}
+
+Please notice that, on both cases, we're getting the statistics using the
+:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that
+the frontend core will automatically call this function periodically
+(usually, 3 times per second, when the frontend is locked).
+
+That warrants that we won't miss to collect a counter and increment the
+monotonic stats at the right time.
+
+Digital TV Frontend functions and types
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: include/media/dvb_frontend.h
diff --git a/Documentation/driver-api/media/dtv-net.rst b/Documentation/driver-api/media/dtv-net.rst
new file mode 100644
index 000000000000..deb6bffe96bb
--- /dev/null
+++ b/Documentation/driver-api/media/dtv-net.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Digital TV Network kABI
+-----------------------
+
+.. kernel-doc:: include/media/dvb_net.h
diff --git a/Documentation/driver-api/media/index.rst b/Documentation/driver-api/media/index.rst
new file mode 100644
index 000000000000..328350924853
--- /dev/null
+++ b/Documentation/driver-api/media/index.rst
@@ -0,0 +1,54 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+===================================
+Media subsystem kernel internal API
+===================================
+
+This section contains usage information about media subsystem and
+its supported drivers.
+
+Please see:
+
+- :doc:`/admin-guide/media/index`
+    for usage information about media subsystem and supported drivers;
+
+- :doc:`/userspace-api/media/index`
+     for the userspace APIs used on media devices.
+
+
+.. only:: html
+
+   .. class:: toc-title
+
+        Table of Contents
+
+.. toctree::
+    :maxdepth: 5
+    :numbered:
+
+    v4l2-core
+    dtv-core
+    rc-core
+    mc-core
+    cec-core
+    csi2
+
+    drivers/index
+
+**Copyright** |copy| 2009-2020 : LinuxTV Developers
+
+::
+
+  This documentation is free software; you can redistribute it and/or modify it
+  under the terms of the GNU General Public License as published by the Free
+  Software Foundation; either version 2 of the License, or (at your option) any
+  later version.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+  more details.
+
+  For more details see the file COPYING in the source distribution of Linux.
diff --git a/Documentation/driver-api/media/mc-core.rst b/Documentation/driver-api/media/mc-core.rst
new file mode 100644
index 000000000000..05bba0b61748
--- /dev/null
+++ b/Documentation/driver-api/media/mc-core.rst
@@ -0,0 +1,309 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Media Controller devices
+------------------------
+
+Media Controller
+~~~~~~~~~~~~~~~~
+
+The media controller userspace API is documented in
+:ref:`the Media Controller uAPI book <media_controller>`. This document focus
+on the kernel-side implementation of the media framework.
+
+Abstract media device model
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Discovering a device internal topology, and configuring it at runtime, is one
+of the goals of the media framework. To achieve this, hardware devices are
+modelled as an oriented graph of building blocks called entities connected
+through pads.
+
+An entity is a basic media hardware building block. It can correspond to
+a large variety of logical blocks such as physical hardware devices
+(CMOS sensor for instance), logical hardware devices (a building block
+in a System-on-Chip image processing pipeline), DMA channels or physical
+connectors.
+
+A pad is a connection endpoint through which an entity can interact with
+other entities. Data (not restricted to video) produced by an entity
+flows from the entity's output to one or more entity inputs. Pads should
+not be confused with physical pins at chip boundaries.
+
+A link is a point-to-point oriented connection between two pads, either
+on the same entity or on different entities. Data flows from a source
+pad to a sink pad.
+
+Media device
+^^^^^^^^^^^^
+
+A media device is represented by a struct :c:type:`media_device`
+instance, defined in ``include/media/media-device.h``.
+Allocation of the structure is handled by the media device driver, usually by
+embedding the :c:type:`media_device` instance in a larger driver-specific
+structure.
+
+Drivers register media device instances by calling
+:c:func:`__media_device_register()` via the macro ``media_device_register()``
+and unregistered by calling :c:func:`media_device_unregister()`.
+
+Entities
+^^^^^^^^
+
+Entities are represented by a struct :c:type:`media_entity`
+instance, defined in ``include/media/media-entity.h``. The structure is usually
+embedded into a higher-level structure, such as
+:c:type:`v4l2_subdev` or :c:type:`video_device`
+instances, although drivers can allocate entities directly.
+
+Drivers initialize entity pads by calling
+:c:func:`media_entity_pads_init()`.
+
+Drivers register entities with a media device by calling
+:c:func:`media_device_register_entity()`
+and unregistered by calling
+:c:func:`media_device_unregister_entity()`.
+
+Interfaces
+^^^^^^^^^^
+
+Interfaces are represented by a
+struct :c:type:`media_interface` instance, defined in
+``include/media/media-entity.h``. Currently, only one type of interface is
+defined: a device node. Such interfaces are represented by a
+struct :c:type:`media_intf_devnode`.
+
+Drivers initialize and create device node interfaces by calling
+:c:func:`media_devnode_create()`
+and remove them by calling:
+:c:func:`media_devnode_remove()`.
+
+Pads
+^^^^
+Pads are represented by a struct :c:type:`media_pad` instance,
+defined in ``include/media/media-entity.h``. Each entity stores its pads in
+a pads array managed by the entity driver. Drivers usually embed the array in
+a driver-specific structure.
+
+Pads are identified by their entity and their 0-based index in the pads
+array.
+
+Both information are stored in the struct :c:type:`media_pad`,
+making the struct :c:type:`media_pad` pointer the canonical way
+to store and pass link references.
+
+Pads have flags that describe the pad capabilities and state.
+
+``MEDIA_PAD_FL_SINK`` indicates that the pad supports sinking data.
+``MEDIA_PAD_FL_SOURCE`` indicates that the pad supports sourcing data.
+
+.. note::
+
+  One and only one of ``MEDIA_PAD_FL_SINK`` or ``MEDIA_PAD_FL_SOURCE`` must
+  be set for each pad.
+
+Links
+^^^^^
+
+Links are represented by a struct :c:type:`media_link` instance,
+defined in ``include/media/media-entity.h``. There are two types of links:
+
+**1. pad to pad links**:
+
+Associate two entities via their PADs. Each entity has a list that points
+to all links originating at or targeting any of its pads.
+A given link is thus stored twice, once in the source entity and once in
+the target entity.
+
+Drivers create pad to pad links by calling:
+:c:func:`media_create_pad_link()` and remove with
+:c:func:`media_entity_remove_links()`.
+
+**2. interface to entity links**:
+
+Associate one interface to a Link.
+
+Drivers create interface to entity links by calling:
+:c:func:`media_create_intf_link()` and remove with
+:c:func:`media_remove_intf_links()`.
+
+.. note::
+
+   Links can only be created after having both ends already created.
+
+Links have flags that describe the link capabilities and state. The
+valid values are described at :c:func:`media_create_pad_link()` and
+:c:func:`media_create_intf_link()`.
+
+Graph traversal
+^^^^^^^^^^^^^^^
+
+The media framework provides APIs to iterate over entities in a graph.
+
+To iterate over all entities belonging to a media device, drivers can use
+the media_device_for_each_entity macro, defined in
+``include/media/media-device.h``.
+
+..  code-block:: c
+
+    struct media_entity *entity;
+
+    media_device_for_each_entity(entity, mdev) {
+    // entity will point to each entity in turn
+    ...
+    }
+
+Drivers might also need to iterate over all entities in a graph that can be
+reached only through enabled links starting at a given entity. The media
+framework provides a depth-first graph traversal API for that purpose.
+
+.. note::
+
+   Graphs with cycles (whether directed or undirected) are **NOT**
+   supported by the graph traversal API. To prevent infinite loops, the graph
+   traversal code limits the maximum depth to ``MEDIA_ENTITY_ENUM_MAX_DEPTH``,
+   currently defined as 16.
+
+Drivers initiate a graph traversal by calling
+:c:func:`media_graph_walk_start()`
+
+The graph structure, provided by the caller, is initialized to start graph
+traversal at the given entity.
+
+Drivers can then retrieve the next entity by calling
+:c:func:`media_graph_walk_next()`
+
+When the graph traversal is complete the function will return ``NULL``.
+
+Graph traversal can be interrupted at any moment. No cleanup function call
+is required and the graph structure can be freed normally.
+
+Helper functions can be used to find a link between two given pads, or a pad
+connected to another pad through an enabled link
+:c:func:`media_entity_find_link()` and
+:c:func:`media_entity_remote_pad()`.
+
+Use count and power handling
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Due to the wide differences between drivers regarding power management
+needs, the media controller does not implement power management. However,
+the struct :c:type:`media_entity` includes a ``use_count``
+field that media drivers
+can use to track the number of users of every entity for power management
+needs.
+
+The :c:type:`media_entity<media_entity>`.\ ``use_count`` field is owned by
+media drivers and must not be
+touched by entity drivers. Access to the field must be protected by the
+:c:type:`media_device`.\ ``graph_mutex`` lock.
+
+Links setup
+^^^^^^^^^^^
+
+Link properties can be modified at runtime by calling
+:c:func:`media_entity_setup_link()`.
+
+Pipelines and media streams
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When starting streaming, drivers must notify all entities in the pipeline to
+prevent link states from being modified during streaming by calling
+:c:func:`media_pipeline_start()`.
+
+The function will mark all entities connected to the given entity through
+enabled links, either directly or indirectly, as streaming.
+
+The struct :c:type:`media_pipeline` instance pointed to by
+the pipe argument will be stored in every entity in the pipeline.
+Drivers should embed the struct :c:type:`media_pipeline`
+in higher-level pipeline structures and can then access the
+pipeline through the struct :c:type:`media_entity`
+pipe field.
+
+Calls to :c:func:`media_pipeline_start()` can be nested.
+The pipeline pointer must be identical for all nested calls to the function.
+
+:c:func:`media_pipeline_start()` may return an error. In that case,
+it will clean up any of the changes it did by itself.
+
+When stopping the stream, drivers must notify the entities with
+:c:func:`media_pipeline_stop()`.
+
+If multiple calls to :c:func:`media_pipeline_start()` have been
+made the same number of :c:func:`media_pipeline_stop()` calls
+are required to stop streaming.
+The :c:type:`media_entity`.\ ``pipe`` field is reset to ``NULL`` on the last
+nested stop call.
+
+Link configuration will fail with ``-EBUSY`` by default if either end of the
+link is a streaming entity. Links that can be modified while streaming must
+be marked with the ``MEDIA_LNK_FL_DYNAMIC`` flag.
+
+If other operations need to be disallowed on streaming entities (such as
+changing entities configuration parameters) drivers can explicitly check the
+media_entity stream_count field to find out if an entity is streaming. This
+operation must be done with the media_device graph_mutex held.
+
+Link validation
+^^^^^^^^^^^^^^^
+
+Link validation is performed by :c:func:`media_pipeline_start()`
+for any entity which has sink pads in the pipeline. The
+:c:type:`media_entity`.\ ``link_validate()`` callback is used for that
+purpose. In ``link_validate()`` callback, entity driver should check
+that the properties of the source pad of the connected entity and its own
+sink pad match. It is up to the type of the entity (and in the end, the
+properties of the hardware) what matching actually means.
+
+Subsystems should facilitate link validation by providing subsystem specific
+helper functions to provide easy access for commonly needed information, and
+in the end provide a way to use driver-specific callbacks.
+
+Media Controller Device Allocator API
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When the media device belongs to more than one driver, the shared media
+device is allocated with the shared struct device as the key for look ups.
+
+The shared media device should stay in registered state until the last
+driver unregisters it. In addition, the media device should be released when
+all the references are released. Each driver gets a reference to the media
+device during probe, when it allocates the media device. If media device is
+already allocated, the allocate API bumps up the refcount and returns the
+existing media device. The driver puts the reference back in its disconnect
+routine when it calls :c:func:`media_device_delete()`.
+
+The media device is unregistered and cleaned up from the kref put handler to
+ensure that the media device stays in registered state until the last driver
+unregisters the media device.
+
+**Driver Usage**
+
+Drivers should use the appropriate media-core routines to manage the shared
+media device life-time handling the two states:
+1. allocate -> register -> delete
+2. get reference to already registered device -> delete
+
+call :c:func:`media_device_delete()` routine to make sure the shared media
+device delete is handled correctly.
+
+**driver probe:**
+Call :c:func:`media_device_usb_allocate()` to allocate or get a reference
+Call :c:func:`media_device_register()`, if media devnode isn't registered
+
+**driver disconnect:**
+Call :c:func:`media_device_delete()` to free the media_device. Freeing is
+handled by the kref put handler.
+
+API Definitions
+^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/media-device.h
+
+.. kernel-doc:: include/media/media-devnode.h
+
+.. kernel-doc:: include/media/media-entity.h
+
+.. kernel-doc:: include/media/media-request.h
+
+.. kernel-doc:: include/media/media-dev-allocator.h
diff --git a/Documentation/driver-api/media/rc-core.rst b/Documentation/driver-api/media/rc-core.rst
new file mode 100644
index 000000000000..53f5e643b6e9
--- /dev/null
+++ b/Documentation/driver-api/media/rc-core.rst
@@ -0,0 +1,88 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Remote Controller devices
+-------------------------
+
+Remote Controller core
+~~~~~~~~~~~~~~~~~~~~~~
+
+The remote controller core implements infrastructure to receive and send
+remote controller keyboard keystrokes and mouse events.
+
+Every time a key is pressed on a remote controller, a scan code is produced.
+Also, on most hardware, keeping a key pressed for more than a few dozens of
+milliseconds produce a repeat key event. That's somewhat similar to what
+a normal keyboard or mouse is handled internally on Linux\ [#f1]_. So, the
+remote controller core is implemented on the top of the linux input/evdev
+interface.
+
+.. [#f1]
+
+   The main difference is that, on keyboard events, the keyboard controller
+   produces one event for a key press and another one for key release. On
+   infrared-based remote controllers, there's no key release event. Instead,
+   an extra code is produced to indicate key repeats.
+
+However, most of the remote controllers use infrared (IR) to transmit signals.
+As there are several protocols used to modulate infrared signals, one
+important part of the core is dedicated to adjust the driver and the core
+system to support the infrared protocol used by the emitter.
+
+The infrared transmission is done by blinking a infrared emitter using a
+carrier. The carrier can be switched on or off by the IR transmitter
+hardware. When the carrier is switched on, it is called *PULSE*.
+When the carrier is switched off, it is called *SPACE*.
+
+In other words, a typical IR transmission can be viewed as a sequence of
+*PULSE* and *SPACE* events, each with a given duration.
+
+The carrier parameters (frequency, duty cycle) and the intervals for
+*PULSE* and *SPACE* events depend on the protocol.
+For example, the NEC protocol uses a carrier of 38kHz, and transmissions
+start with a 9ms *PULSE* and a 4.5ms SPACE. It then transmits 16 bits of
+scan code, being 8 bits for address (usually it is a fixed number for a
+given remote controller), followed by 8 bits of code. A bit "1" is modulated
+with 560µs *PULSE* followed by 1690µs *SPACE* and a bit "0"  is modulated
+with 560µs *PULSE* followed by 560µs *SPACE*.
+
+At receiver, a simple low-pass filter can be used to convert the received
+signal in a sequence of *PULSE/SPACE* events, filtering out the carrier
+frequency. Due to that, the receiver doesn't care about the carrier's
+actual frequency parameters: all it has to do is to measure the amount
+of time it receives *PULSE/SPACE* events.
+So, a simple IR receiver hardware will just provide a sequence of timings
+for those events to the Kernel. The drivers for hardware with such kind of
+receivers are identified by  ``RC_DRIVER_IR_RAW``, as defined by
+:c:type:`rc_driver_type`\ [#f2]_. Other hardware come with a
+microcontroller that decode the *PULSE/SPACE* sequence and return scan
+codes to the Kernel. Such kind of receivers are identified
+by ``RC_DRIVER_SCANCODE``.
+
+.. [#f2]
+
+   The RC core also supports devices that have just IR emitters,
+   without any receivers. Right now, all such devices work only in
+   raw TX mode. Such kind of hardware is identified as
+   ``RC_DRIVER_IR_RAW_TX``.
+
+When the RC core receives events produced by ``RC_DRIVER_IR_RAW`` IR
+receivers, it needs to decode the IR protocol, in order to obtain the
+corresponding scan code. The protocols supported by the RC core are
+defined at enum :c:type:`rc_proto`.
+
+When the RC code receives a scan code (either directly, by a driver
+of the type ``RC_DRIVER_SCANCODE``, or via its IR decoders), it needs
+to convert into a Linux input event code. This is done via a mapping
+table.
+
+The Kernel has support for mapping tables available on most media
+devices. It also supports loading a table in runtime, via some
+sysfs nodes. See the :ref:`RC userspace API <Remote_controllers_Intro>`
+for more details.
+
+Remote controller data structures and functions
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/rc-core.h
+
+.. kernel-doc:: include/media/rc-map.h
diff --git a/Documentation/driver-api/media/v4l2-async.rst b/Documentation/driver-api/media/v4l2-async.rst
new file mode 100644
index 000000000000..3422330b3b1f
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-async.rst
@@ -0,0 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 async kAPI
+^^^^^^^^^^^^^^^
+.. kernel-doc:: include/media/v4l2-async.h
diff --git a/Documentation/driver-api/media/v4l2-clocks.rst b/Documentation/driver-api/media/v4l2-clocks.rst
new file mode 100644
index 000000000000..5c22eecab7ba
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-clocks.rst
@@ -0,0 +1,31 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 clocks
+-----------
+
+.. attention::
+
+	This is a temporary API and it shall be replaced by the generic
+	clock API, when the latter becomes widely available.
+
+Many subdevices, like camera sensors, TV decoders and encoders, need a clock
+signal to be supplied by the system. Often this clock is supplied by the
+respective bridge device. The Linux kernel provides a Common Clock Framework for
+this purpose. However, it is not (yet) available on all architectures. Besides,
+the nature of the multi-functional (clock, data + synchronisation, I2C control)
+connection of subdevices to the system might impose special requirements on the
+clock API usage. E.g. V4L2 has to support clock provider driver unregistration
+while a subdevice driver is holding a reference to the clock. For these reasons
+a V4L2 clock helper API has been developed and is provided to bridge and
+subdevice drivers.
+
+The API consists of two parts: two functions to register and unregister a V4L2
+clock source: v4l2_clk_register() and v4l2_clk_unregister() and calls to control
+a clock object, similar to the respective generic clock API calls:
+v4l2_clk_get(), v4l2_clk_put(), v4l2_clk_enable(), v4l2_clk_disable(),
+v4l2_clk_get_rate(), and v4l2_clk_set_rate(). Clock suppliers have to provide
+clock operations that will be called when clock users invoke respective API
+methods.
+
+It is expected that once the CCF becomes available on all relevant
+architectures this API will be removed.
diff --git a/Documentation/driver-api/media/v4l2-common.rst b/Documentation/driver-api/media/v4l2-common.rst
new file mode 100644
index 000000000000..b1e70eb56aa4
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-common.rst
@@ -0,0 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 common functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-common.h
+
+.. kernel-doc:: include/media/v4l2-ioctl.h
diff --git a/Documentation/driver-api/media/v4l2-controls.rst b/Documentation/driver-api/media/v4l2-controls.rst
new file mode 100644
index 000000000000..5129019afb49
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-controls.rst
@@ -0,0 +1,823 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 Controls
+=============
+
+Introduction
+------------
+
+The V4L2 control API seems simple enough, but quickly becomes very hard to
+implement correctly in drivers. But much of the code needed to handle controls
+is actually not driver specific and can be moved to the V4L core framework.
+
+After all, the only part that a driver developer is interested in is:
+
+1) How do I add a control?
+2) How do I set the control's value? (i.e. s_ctrl)
+
+And occasionally:
+
+3) How do I get the control's value? (i.e. g_volatile_ctrl)
+4) How do I validate the user's proposed control value? (i.e. try_ctrl)
+
+All the rest is something that can be done centrally.
+
+The control framework was created in order to implement all the rules of the
+V4L2 specification with respect to controls in a central place. And to make
+life as easy as possible for the driver developer.
+
+Note that the control framework relies on the presence of a struct
+:c:type:`v4l2_device` for V4L2 drivers and struct :c:type:`v4l2_subdev` for
+sub-device drivers.
+
+
+Objects in the framework
+------------------------
+
+There are two main objects:
+
+The :c:type:`v4l2_ctrl` object describes the control properties and keeps
+track of the control's value (both the current value and the proposed new
+value).
+
+:c:type:`v4l2_ctrl_handler` is the object that keeps track of controls. It
+maintains a list of v4l2_ctrl objects that it owns and another list of
+references to controls, possibly to controls owned by other handlers.
+
+
+Basic usage for V4L2 and sub-device drivers
+-------------------------------------------
+
+1) Prepare the driver:
+
+.. code-block:: c
+
+	#include <media/v4l2-ctrls.h>
+
+1.1) Add the handler to your driver's top-level struct:
+
+For V4L2 drivers:
+
+.. code-block:: c
+
+	struct foo_dev {
+		...
+		struct v4l2_device v4l2_dev;
+		...
+		struct v4l2_ctrl_handler ctrl_handler;
+		...
+	};
+
+For sub-device drivers:
+
+.. code-block:: c
+
+	struct foo_dev {
+		...
+		struct v4l2_subdev sd;
+		...
+		struct v4l2_ctrl_handler ctrl_handler;
+		...
+	};
+
+1.2) Initialize the handler:
+
+.. code-block:: c
+
+	v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+
+The second argument is a hint telling the function how many controls this
+handler is expected to handle. It will allocate a hashtable based on this
+information. It is a hint only.
+
+1.3) Hook the control handler into the driver:
+
+For V4L2 drivers:
+
+.. code-block:: c
+
+	foo->v4l2_dev.ctrl_handler = &foo->ctrl_handler;
+
+For sub-device drivers:
+
+.. code-block:: c
+
+	foo->sd.ctrl_handler = &foo->ctrl_handler;
+
+1.4) Clean up the handler at the end:
+
+.. code-block:: c
+
+	v4l2_ctrl_handler_free(&foo->ctrl_handler);
+
+
+2) Add controls:
+
+You add non-menu controls by calling :c:func:`v4l2_ctrl_new_std`:
+
+.. code-block:: c
+
+	struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 min, s32 max, u32 step, s32 def);
+
+Menu and integer menu controls are added by calling
+:c:func:`v4l2_ctrl_new_std_menu`:
+
+.. code-block:: c
+
+	struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 max, s32 skip_mask, s32 def);
+
+Menu controls with a driver specific menu are added by calling
+:c:func:`v4l2_ctrl_new_std_menu_items`:
+
+.. code-block:: c
+
+       struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(
+                       struct v4l2_ctrl_handler *hdl,
+                       const struct v4l2_ctrl_ops *ops, u32 id, s32 max,
+                       s32 skip_mask, s32 def, const char * const *qmenu);
+
+Standard compound controls can be added by calling
+:c:func:`v4l2_ctrl_new_std_compound`:
+
+.. code-block:: c
+
+       struct v4l2_ctrl *v4l2_ctrl_new_std_compound(struct v4l2_ctrl_handler *hdl,
+                       const struct v4l2_ctrl_ops *ops, u32 id,
+                       const union v4l2_ctrl_ptr p_def);
+
+Integer menu controls with a driver specific menu can be added by calling
+:c:func:`v4l2_ctrl_new_int_menu`:
+
+.. code-block:: c
+
+	struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 max, s32 def, const s64 *qmenu_int);
+
+These functions are typically called right after the
+:c:func:`v4l2_ctrl_handler_init`:
+
+.. code-block:: c
+
+	static const s64 exp_bias_qmenu[] = {
+	       -2, -1, 0, 1, 2
+	};
+	static const char * const test_pattern[] = {
+		"Disabled",
+		"Vertical Bars",
+		"Solid Black",
+		"Solid White",
+	};
+
+	v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+	v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 255, 1, 128);
+	v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_POWER_LINE_FREQUENCY,
+			V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
+			V4L2_CID_POWER_LINE_FREQUENCY_DISABLED);
+	v4l2_ctrl_new_int_menu(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_EXPOSURE_BIAS,
+			ARRAY_SIZE(exp_bias_qmenu) - 1,
+			ARRAY_SIZE(exp_bias_qmenu) / 2 - 1,
+			exp_bias_qmenu);
+	v4l2_ctrl_new_std_menu_items(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_TEST_PATTERN, ARRAY_SIZE(test_pattern) - 1, 0,
+			0, test_pattern);
+	...
+	if (foo->ctrl_handler.error) {
+		int err = foo->ctrl_handler.error;
+
+		v4l2_ctrl_handler_free(&foo->ctrl_handler);
+		return err;
+	}
+
+The :c:func:`v4l2_ctrl_new_std` function returns the v4l2_ctrl pointer to
+the new control, but if you do not need to access the pointer outside the
+control ops, then there is no need to store it.
+
+The :c:func:`v4l2_ctrl_new_std` function will fill in most fields based on
+the control ID except for the min, max, step and default values. These are
+passed in the last four arguments. These values are driver specific while
+control attributes like type, name, flags are all global. The control's
+current value will be set to the default value.
+
+The :c:func:`v4l2_ctrl_new_std_menu` function is very similar but it is
+used for menu controls. There is no min argument since that is always 0 for
+menu controls, and instead of a step there is a skip_mask argument: if bit
+X is 1, then menu item X is skipped.
+
+The :c:func:`v4l2_ctrl_new_int_menu` function creates a new standard
+integer menu control with driver-specific items in the menu. It differs
+from v4l2_ctrl_new_std_menu in that it doesn't have the mask argument and
+takes as the last argument an array of signed 64-bit integers that form an
+exact menu item list.
+
+The :c:func:`v4l2_ctrl_new_std_menu_items` function is very similar to
+v4l2_ctrl_new_std_menu but takes an extra parameter qmenu, which is the
+driver specific menu for an otherwise standard menu control. A good example
+for this control is the test pattern control for capture/display/sensors
+devices that have the capability to generate test patterns. These test
+patterns are hardware specific, so the contents of the menu will vary from
+device to device.
+
+Note that if something fails, the function will return NULL or an error and
+set ctrl_handler->error to the error code. If ctrl_handler->error was already
+set, then it will just return and do nothing. This is also true for
+v4l2_ctrl_handler_init if it cannot allocate the internal data structure.
+
+This makes it easy to init the handler and just add all controls and only check
+the error code at the end. Saves a lot of repetitive error checking.
+
+It is recommended to add controls in ascending control ID order: it will be
+a bit faster that way.
+
+3) Optionally force initial control setup:
+
+.. code-block:: c
+
+	v4l2_ctrl_handler_setup(&foo->ctrl_handler);
+
+This will call s_ctrl for all controls unconditionally. Effectively this
+initializes the hardware to the default control values. It is recommended
+that you do this as this ensures that both the internal data structures and
+the hardware are in sync.
+
+4) Finally: implement the :c:type:`v4l2_ctrl_ops`
+
+.. code-block:: c
+
+	static const struct v4l2_ctrl_ops foo_ctrl_ops = {
+		.s_ctrl = foo_s_ctrl,
+	};
+
+Usually all you need is s_ctrl:
+
+.. code-block:: c
+
+	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+	{
+		struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+		switch (ctrl->id) {
+		case V4L2_CID_BRIGHTNESS:
+			write_reg(0x123, ctrl->val);
+			break;
+		case V4L2_CID_CONTRAST:
+			write_reg(0x456, ctrl->val);
+			break;
+		}
+		return 0;
+	}
+
+The control ops are called with the v4l2_ctrl pointer as argument.
+The new control value has already been validated, so all you need to do is
+to actually update the hardware registers.
+
+You're done! And this is sufficient for most of the drivers we have. No need
+to do any validation of control values, or implement QUERYCTRL, QUERY_EXT_CTRL
+and QUERYMENU. And G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported.
+
+
+.. note::
+
+   The remainder sections deal with more advanced controls topics and scenarios.
+   In practice the basic usage as described above is sufficient for most drivers.
+
+
+Inheriting Sub-device Controls
+------------------------------
+
+When a sub-device is registered with a V4L2 driver by calling
+v4l2_device_register_subdev() and the ctrl_handler fields of both v4l2_subdev
+and v4l2_device are set, then the controls of the subdev will become
+automatically available in the V4L2 driver as well. If the subdev driver
+contains controls that already exist in the V4L2 driver, then those will be
+skipped (so a V4L2 driver can always override a subdev control).
+
+What happens here is that v4l2_device_register_subdev() calls
+v4l2_ctrl_add_handler() adding the controls of the subdev to the controls
+of v4l2_device.
+
+
+Accessing Control Values
+------------------------
+
+The following union is used inside the control framework to access control
+values:
+
+.. code-block:: c
+
+	union v4l2_ctrl_ptr {
+		s32 *p_s32;
+		s64 *p_s64;
+		char *p_char;
+		void *p;
+	};
+
+The v4l2_ctrl struct contains these fields that can be used to access both
+current and new values:
+
+.. code-block:: c
+
+	s32 val;
+	struct {
+		s32 val;
+	} cur;
+
+
+	union v4l2_ctrl_ptr p_new;
+	union v4l2_ctrl_ptr p_cur;
+
+If the control has a simple s32 type type, then:
+
+.. code-block:: c
+
+	&ctrl->val == ctrl->p_new.p_s32
+	&ctrl->cur.val == ctrl->p_cur.p_s32
+
+For all other types use ctrl->p_cur.p<something>. Basically the val
+and cur.val fields can be considered an alias since these are used so often.
+
+Within the control ops you can freely use these. The val and cur.val speak for
+themselves. The p_char pointers point to character buffers of length
+ctrl->maximum + 1, and are always 0-terminated.
+
+Unless the control is marked volatile the p_cur field points to the the
+current cached control value. When you create a new control this value is made
+identical to the default value. After calling v4l2_ctrl_handler_setup() this
+value is passed to the hardware. It is generally a good idea to call this
+function.
+
+Whenever a new value is set that new value is automatically cached. This means
+that most drivers do not need to implement the g_volatile_ctrl() op. The
+exception is for controls that return a volatile register such as a signal
+strength read-out that changes continuously. In that case you will need to
+implement g_volatile_ctrl like this:
+
+.. code-block:: c
+
+	static int foo_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+	{
+		switch (ctrl->id) {
+		case V4L2_CID_BRIGHTNESS:
+			ctrl->val = read_reg(0x123);
+			break;
+		}
+	}
+
+Note that you use the 'new value' union as well in g_volatile_ctrl. In general
+controls that need to implement g_volatile_ctrl are read-only controls. If they
+are not, a V4L2_EVENT_CTRL_CH_VALUE will not be generated when the control
+changes.
+
+To mark a control as volatile you have to set V4L2_CTRL_FLAG_VOLATILE:
+
+.. code-block:: c
+
+	ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
+	if (ctrl)
+		ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
+
+For try/s_ctrl the new values (i.e. as passed by the user) are filled in and
+you can modify them in try_ctrl or set them in s_ctrl. The 'cur' union
+contains the current value, which you can use (but not change!) as well.
+
+If s_ctrl returns 0 (OK), then the control framework will copy the new final
+values to the 'cur' union.
+
+While in g_volatile/s/try_ctrl you can access the value of all controls owned
+by the same handler since the handler's lock is held. If you need to access
+the value of controls owned by other handlers, then you have to be very careful
+not to introduce deadlocks.
+
+Outside of the control ops you have to go through to helper functions to get
+or set a single control value safely in your driver:
+
+.. code-block:: c
+
+	s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+	int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+These functions go through the control framework just as VIDIOC_G/S_CTRL ioctls
+do. Don't use these inside the control ops g_volatile/s/try_ctrl, though, that
+will result in a deadlock since these helpers lock the handler as well.
+
+You can also take the handler lock yourself:
+
+.. code-block:: c
+
+	mutex_lock(&state->ctrl_handler.lock);
+	pr_info("String value is '%s'\n", ctrl1->p_cur.p_char);
+	pr_info("Integer value is '%s'\n", ctrl2->cur.val);
+	mutex_unlock(&state->ctrl_handler.lock);
+
+
+Menu Controls
+-------------
+
+The v4l2_ctrl struct contains this union:
+
+.. code-block:: c
+
+	union {
+		u32 step;
+		u32 menu_skip_mask;
+	};
+
+For menu controls menu_skip_mask is used. What it does is that it allows you
+to easily exclude certain menu items. This is used in the VIDIOC_QUERYMENU
+implementation where you can return -EINVAL if a certain menu item is not
+present. Note that VIDIOC_QUERYCTRL always returns a step value of 1 for
+menu controls.
+
+A good example is the MPEG Audio Layer II Bitrate menu control where the
+menu is a list of standardized possible bitrates. But in practice hardware
+implementations will only support a subset of those. By setting the skip
+mask you can tell the framework which menu items should be skipped. Setting
+it to 0 means that all menu items are supported.
+
+You set this mask either through the v4l2_ctrl_config struct for a custom
+control, or by calling v4l2_ctrl_new_std_menu().
+
+
+Custom Controls
+---------------
+
+Driver specific controls can be created using v4l2_ctrl_new_custom():
+
+.. code-block:: c
+
+	static const struct v4l2_ctrl_config ctrl_filter = {
+		.ops = &ctrl_custom_ops,
+		.id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+		.name = "Spatial Filter",
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.flags = V4L2_CTRL_FLAG_SLIDER,
+		.max = 15,
+		.step = 1,
+	};
+
+	ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_filter, NULL);
+
+The last argument is the priv pointer which can be set to driver-specific
+private data.
+
+The v4l2_ctrl_config struct also has a field to set the is_private flag.
+
+If the name field is not set, then the framework will assume this is a standard
+control and will fill in the name, type and flags fields accordingly.
+
+
+Active and Grabbed Controls
+---------------------------
+
+If you get more complex relationships between controls, then you may have to
+activate and deactivate controls. For example, if the Chroma AGC control is
+on, then the Chroma Gain control is inactive. That is, you may set it, but
+the value will not be used by the hardware as long as the automatic gain
+control is on. Typically user interfaces can disable such input fields.
+
+You can set the 'active' status using v4l2_ctrl_activate(). By default all
+controls are active. Note that the framework does not check for this flag.
+It is meant purely for GUIs. The function is typically called from within
+s_ctrl.
+
+The other flag is the 'grabbed' flag. A grabbed control means that you cannot
+change it because it is in use by some resource. Typical examples are MPEG
+bitrate controls that cannot be changed while capturing is in progress.
+
+If a control is set to 'grabbed' using v4l2_ctrl_grab(), then the framework
+will return -EBUSY if an attempt is made to set this control. The
+v4l2_ctrl_grab() function is typically called from the driver when it
+starts or stops streaming.
+
+
+Control Clusters
+----------------
+
+By default all controls are independent from the others. But in more
+complex scenarios you can get dependencies from one control to another.
+In that case you need to 'cluster' them:
+
+.. code-block:: c
+
+	struct foo {
+		struct v4l2_ctrl_handler ctrl_handler;
+	#define AUDIO_CL_VOLUME (0)
+	#define AUDIO_CL_MUTE   (1)
+		struct v4l2_ctrl *audio_cluster[2];
+		...
+	};
+
+	state->audio_cluster[AUDIO_CL_VOLUME] =
+		v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	state->audio_cluster[AUDIO_CL_MUTE] =
+		v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	v4l2_ctrl_cluster(ARRAY_SIZE(state->audio_cluster), state->audio_cluster);
+
+From now on whenever one or more of the controls belonging to the same
+cluster is set (or 'gotten', or 'tried'), only the control ops of the first
+control ('volume' in this example) is called. You effectively create a new
+composite control. Similar to how a 'struct' works in C.
+
+So when s_ctrl is called with V4L2_CID_AUDIO_VOLUME as argument, you should set
+all two controls belonging to the audio_cluster:
+
+.. code-block:: c
+
+	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+	{
+		struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+		switch (ctrl->id) {
+		case V4L2_CID_AUDIO_VOLUME: {
+			struct v4l2_ctrl *mute = ctrl->cluster[AUDIO_CL_MUTE];
+
+			write_reg(0x123, mute->val ? 0 : ctrl->val);
+			break;
+		}
+		case V4L2_CID_CONTRAST:
+			write_reg(0x456, ctrl->val);
+			break;
+		}
+		return 0;
+	}
+
+In the example above the following are equivalent for the VOLUME case:
+
+.. code-block:: c
+
+	ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
+	ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
+
+In practice using cluster arrays like this becomes very tiresome. So instead
+the following equivalent method is used:
+
+.. code-block:: c
+
+	struct {
+		/* audio cluster */
+		struct v4l2_ctrl *volume;
+		struct v4l2_ctrl *mute;
+	};
+
+The anonymous struct is used to clearly 'cluster' these two control pointers,
+but it serves no other purpose. The effect is the same as creating an
+array with two control pointers. So you can just do:
+
+.. code-block:: c
+
+	state->volume = v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	state->mute = v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	v4l2_ctrl_cluster(2, &state->volume);
+
+And in foo_s_ctrl you can use these pointers directly: state->mute->val.
+
+Note that controls in a cluster may be NULL. For example, if for some
+reason mute was never added (because the hardware doesn't support that
+particular feature), then mute will be NULL. So in that case we have a
+cluster of 2 controls, of which only 1 is actually instantiated. The
+only restriction is that the first control of the cluster must always be
+present, since that is the 'master' control of the cluster. The master
+control is the one that identifies the cluster and that provides the
+pointer to the v4l2_ctrl_ops struct that is used for that cluster.
+
+Obviously, all controls in the cluster array must be initialized to either
+a valid control or to NULL.
+
+In rare cases you might want to know which controls of a cluster actually
+were set explicitly by the user. For this you can check the 'is_new' flag of
+each control. For example, in the case of a volume/mute cluster the 'is_new'
+flag of the mute control would be set if the user called VIDIOC_S_CTRL for
+mute only. If the user would call VIDIOC_S_EXT_CTRLS for both mute and volume
+controls, then the 'is_new' flag would be 1 for both controls.
+
+The 'is_new' flag is always 1 when called from v4l2_ctrl_handler_setup().
+
+
+Handling autogain/gain-type Controls with Auto Clusters
+-------------------------------------------------------
+
+A common type of control cluster is one that handles 'auto-foo/foo'-type
+controls. Typical examples are autogain/gain, autoexposure/exposure,
+autowhitebalance/red balance/blue balance. In all cases you have one control
+that determines whether another control is handled automatically by the hardware,
+or whether it is under manual control from the user.
+
+If the cluster is in automatic mode, then the manual controls should be
+marked inactive and volatile. When the volatile controls are read the
+g_volatile_ctrl operation should return the value that the hardware's automatic
+mode set up automatically.
+
+If the cluster is put in manual mode, then the manual controls should become
+active again and the volatile flag is cleared (so g_volatile_ctrl is no longer
+called while in manual mode). In addition just before switching to manual mode
+the current values as determined by the auto mode are copied as the new manual
+values.
+
+Finally the V4L2_CTRL_FLAG_UPDATE should be set for the auto control since
+changing that control affects the control flags of the manual controls.
+
+In order to simplify this a special variation of v4l2_ctrl_cluster was
+introduced:
+
+.. code-block:: c
+
+	void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
+				    u8 manual_val, bool set_volatile);
+
+The first two arguments are identical to v4l2_ctrl_cluster. The third argument
+tells the framework which value switches the cluster into manual mode. The
+last argument will optionally set V4L2_CTRL_FLAG_VOLATILE for the non-auto controls.
+If it is false, then the manual controls are never volatile. You would typically
+use that if the hardware does not give you the option to read back to values as
+determined by the auto mode (e.g. if autogain is on, the hardware doesn't allow
+you to obtain the current gain value).
+
+The first control of the cluster is assumed to be the 'auto' control.
+
+Using this function will ensure that you don't need to handle all the complex
+flag and volatile handling.
+
+
+VIDIOC_LOG_STATUS Support
+-------------------------
+
+This ioctl allow you to dump the current status of a driver to the kernel log.
+The v4l2_ctrl_handler_log_status(ctrl_handler, prefix) can be used to dump the
+value of the controls owned by the given handler to the log. You can supply a
+prefix as well. If the prefix didn't end with a space, then ': ' will be added
+for you.
+
+
+Different Handlers for Different Video Nodes
+--------------------------------------------
+
+Usually the V4L2 driver has just one control handler that is global for
+all video nodes. But you can also specify different control handlers for
+different video nodes. You can do that by manually setting the ctrl_handler
+field of struct video_device.
+
+That is no problem if there are no subdevs involved but if there are, then
+you need to block the automatic merging of subdev controls to the global
+control handler. You do that by simply setting the ctrl_handler field in
+struct v4l2_device to NULL. Now v4l2_device_register_subdev() will no longer
+merge subdev controls.
+
+After each subdev was added, you will then have to call v4l2_ctrl_add_handler
+manually to add the subdev's control handler (sd->ctrl_handler) to the desired
+control handler. This control handler may be specific to the video_device or
+for a subset of video_device's. For example: the radio device nodes only have
+audio controls, while the video and vbi device nodes share the same control
+handler for the audio and video controls.
+
+If you want to have one handler (e.g. for a radio device node) have a subset
+of another handler (e.g. for a video device node), then you should first add
+the controls to the first handler, add the other controls to the second
+handler and finally add the first handler to the second. For example:
+
+.. code-block:: c
+
+	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_VOLUME, ...);
+	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+	v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler, NULL);
+
+The last argument to v4l2_ctrl_add_handler() is a filter function that allows
+you to filter which controls will be added. Set it to NULL if you want to add
+all controls.
+
+Or you can add specific controls to a handler:
+
+.. code-block:: c
+
+	volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_CONTRAST, ...);
+
+What you should not do is make two identical controls for two handlers.
+For example:
+
+.. code-block:: c
+
+	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_AUDIO_MUTE, ...);
+
+This would be bad since muting the radio would not change the video mute
+control. The rule is to have one control for each hardware 'knob' that you
+can twiddle.
+
+
+Finding Controls
+----------------
+
+Normally you have created the controls yourself and you can store the struct
+v4l2_ctrl pointer into your own struct.
+
+But sometimes you need to find a control from another handler that you do
+not own. For example, if you have to find a volume control from a subdev.
+
+You can do that by calling v4l2_ctrl_find:
+
+.. code-block:: c
+
+	struct v4l2_ctrl *volume;
+
+	volume = v4l2_ctrl_find(sd->ctrl_handler, V4L2_CID_AUDIO_VOLUME);
+
+Since v4l2_ctrl_find will lock the handler you have to be careful where you
+use it. For example, this is not a good idea:
+
+.. code-block:: c
+
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+	v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+
+...and in video_ops.s_ctrl:
+
+.. code-block:: c
+
+	case V4L2_CID_BRIGHTNESS:
+		contrast = v4l2_find_ctrl(&ctrl_handler, V4L2_CID_CONTRAST);
+		...
+
+When s_ctrl is called by the framework the ctrl_handler.lock is already taken, so
+attempting to find another control from the same handler will deadlock.
+
+It is recommended not to use this function from inside the control ops.
+
+
+Preventing Controls inheritance
+-------------------------------
+
+When one control handler is added to another using v4l2_ctrl_add_handler, then
+by default all controls from one are merged to the other. But a subdev might
+have low-level controls that make sense for some advanced embedded system, but
+not when it is used in consumer-level hardware. In that case you want to keep
+those low-level controls local to the subdev. You can do this by simply
+setting the 'is_private' flag of the control to 1:
+
+.. code-block:: c
+
+	static const struct v4l2_ctrl_config ctrl_private = {
+		.ops = &ctrl_custom_ops,
+		.id = V4L2_CID_...,
+		.name = "Some Private Control",
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.max = 15,
+		.step = 1,
+		.is_private = 1,
+	};
+
+	ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_private, NULL);
+
+These controls will now be skipped when v4l2_ctrl_add_handler is called.
+
+
+V4L2_CTRL_TYPE_CTRL_CLASS Controls
+----------------------------------
+
+Controls of this type can be used by GUIs to get the name of the control class.
+A fully featured GUI can make a dialog with multiple tabs with each tab
+containing the controls belonging to a particular control class. The name of
+each tab can be found by querying a special control with ID <control class | 1>.
+
+Drivers do not have to care about this. The framework will automatically add
+a control of this type whenever the first control belonging to a new control
+class is added.
+
+
+Adding Notify Callbacks
+-----------------------
+
+Sometimes the platform or bridge driver needs to be notified when a control
+from a sub-device driver changes. You can set a notify callback by calling
+this function:
+
+.. code-block:: c
+
+	void v4l2_ctrl_notify(struct v4l2_ctrl *ctrl,
+		void (*notify)(struct v4l2_ctrl *ctrl, void *priv), void *priv);
+
+Whenever the give control changes value the notify callback will be called
+with a pointer to the control and the priv pointer that was passed with
+v4l2_ctrl_notify. Note that the control's handler lock is held when the
+notify function is called.
+
+There can be only one notify function per control handler. Any attempt
+to set another notify function will cause a WARN_ON.
+
+v4l2_ctrl functions and data structures
+---------------------------------------
+
+.. kernel-doc:: include/media/v4l2-ctrls.h
diff --git a/Documentation/driver-api/media/v4l2-core.rst b/Documentation/driver-api/media/v4l2-core.rst
new file mode 100644
index 000000000000..0dcad7a23141
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-core.rst
@@ -0,0 +1,29 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Video4Linux devices
+-------------------
+
+.. toctree::
+    :maxdepth: 1
+
+    v4l2-intro
+    v4l2-dev
+    v4l2-device
+    v4l2-fh
+    v4l2-subdev
+    v4l2-event
+    v4l2-controls
+    v4l2-videobuf
+    v4l2-videobuf2
+    v4l2-clocks
+    v4l2-dv-timings
+    v4l2-flash-led-class
+    v4l2-mc
+    v4l2-mediabus
+    v4l2-mem2mem
+    v4l2-async
+    v4l2-fwnode
+    v4l2-rect
+    v4l2-tuner
+    v4l2-common
+    v4l2-tveeprom
diff --git a/Documentation/driver-api/media/v4l2-dev.rst b/Documentation/driver-api/media/v4l2-dev.rst
new file mode 100644
index 000000000000..63c064837c00
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-dev.rst
@@ -0,0 +1,375 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Video device' s internal representation
+=======================================
+
+The actual device nodes in the ``/dev`` directory are created using the
+:c:type:`video_device` struct (``v4l2-dev.h``). This struct can either be
+allocated dynamically or embedded in a larger struct.
+
+To allocate it dynamically use :c:func:`video_device_alloc`:
+
+.. code-block:: c
+
+	struct video_device *vdev = video_device_alloc();
+
+	if (vdev == NULL)
+		return -ENOMEM;
+
+	vdev->release = video_device_release;
+
+If you embed it in a larger struct, then you must set the ``release()``
+callback to your own function:
+
+.. code-block:: c
+
+	struct video_device *vdev = &my_vdev->vdev;
+
+	vdev->release = my_vdev_release;
+
+The ``release()`` callback must be set and it is called when the last user
+of the video device exits.
+
+The default :c:func:`video_device_release` callback currently
+just calls ``kfree`` to free the allocated memory.
+
+There is also a :c:func:`video_device_release_empty` function that does
+nothing (is empty) and should be used if the struct is embedded and there
+is nothing to do when it is released.
+
+You should also set these fields of :c:type:`video_device`:
+
+- :c:type:`video_device`->v4l2_dev: must be set to the :c:type:`v4l2_device`
+  parent device.
+
+- :c:type:`video_device`->name: set to something descriptive and unique.
+
+- :c:type:`video_device`->vfl_dir: set this to ``VFL_DIR_RX`` for capture
+  devices (``VFL_DIR_RX`` has value 0, so this is normally already the
+  default), set to ``VFL_DIR_TX`` for output devices and ``VFL_DIR_M2M`` for mem2mem (codec) devices.
+
+- :c:type:`video_device`->fops: set to the :c:type:`v4l2_file_operations`
+  struct.
+
+- :c:type:`video_device`->ioctl_ops: if you use the :c:type:`v4l2_ioctl_ops`
+  to simplify ioctl maintenance (highly recommended to use this and it might
+  become compulsory in the future!), then set this to your
+  :c:type:`v4l2_ioctl_ops` struct. The :c:type:`video_device`->vfl_type and
+  :c:type:`video_device`->vfl_dir fields are used to disable ops that do not
+  match the type/dir combination. E.g. VBI ops are disabled for non-VBI nodes,
+  and output ops  are disabled for a capture device. This makes it possible to
+  provide just one :c:type:`v4l2_ioctl_ops` struct for both vbi and
+  video nodes.
+
+- :c:type:`video_device`->lock: leave to ``NULL`` if you want to do all the
+  locking  in the driver. Otherwise you give it a pointer to a struct
+  ``mutex_lock`` and before the :c:type:`video_device`->unlocked_ioctl
+  file operation is called this lock will be taken by the core and released
+  afterwards. See the next section for more details.
+
+- :c:type:`video_device`->queue: a pointer to the struct :c:type:`vb2_queue`
+  associated with this device node.
+  If queue is not ``NULL``, and queue->lock is not ``NULL``, then queue->lock
+  is used for the queuing ioctls (``VIDIOC_REQBUFS``, ``CREATE_BUFS``,
+  ``QBUF``, ``DQBUF``,  ``QUERYBUF``, ``PREPARE_BUF``, ``STREAMON`` and
+  ``STREAMOFF``) instead of the lock above.
+  That way the :ref:`vb2 <vb2_framework>` queuing framework does not have
+  to wait for other ioctls.   This queue pointer is also used by the
+  :ref:`vb2 <vb2_framework>` helper functions to check for
+  queuing ownership (i.e. is the filehandle calling it allowed to do the
+  operation).
+
+- :c:type:`video_device`->prio: keeps track of the priorities. Used to
+  implement ``VIDIOC_G_PRIORITY`` and ``VIDIOC_S_PRIORITY``.
+  If left to ``NULL``, then it will use the struct :c:type:`v4l2_prio_state`
+  in :c:type:`v4l2_device`. If you want to have a separate priority state per
+  (group of) device node(s),   then you can point it to your own struct
+  :c:type:`v4l2_prio_state`.
+
+- :c:type:`video_device`->dev_parent: you only set this if v4l2_device was
+  registered with ``NULL`` as the parent ``device`` struct. This only happens
+  in cases where one hardware device has multiple PCI devices that all share
+  the same :c:type:`v4l2_device` core.
+
+  The cx88 driver is an example of this: one core :c:type:`v4l2_device` struct,
+  but   it is used by both a raw video PCI device (cx8800) and a MPEG PCI device
+  (cx8802). Since the :c:type:`v4l2_device` cannot be associated with two PCI
+  devices at the same time it is setup without a parent device. But when the
+  struct :c:type:`video_device` is initialized you **do** know which parent
+  PCI device to use and so you set ``dev_device`` to the correct PCI device.
+
+If you use :c:type:`v4l2_ioctl_ops`, then you should set
+:c:type:`video_device`->unlocked_ioctl to :c:func:`video_ioctl2` in your
+:c:type:`v4l2_file_operations` struct.
+
+In some cases you want to tell the core that a function you had specified in
+your :c:type:`v4l2_ioctl_ops` should be ignored. You can mark such ioctls by
+calling this function before :c:func:`video_register_device` is called:
+
+	:c:func:`v4l2_disable_ioctl <v4l2_disable_ioctl>`
+	(:c:type:`vdev <video_device>`, cmd).
+
+This tends to be needed if based on external factors (e.g. which card is
+being used) you want to turns off certain features in :c:type:`v4l2_ioctl_ops`
+without having to make a new struct.
+
+The :c:type:`v4l2_file_operations` struct is a subset of file_operations.
+The main difference is that the inode argument is omitted since it is never
+used.
+
+If integration with the media framework is needed, you must initialize the
+:c:type:`media_entity` struct embedded in the :c:type:`video_device` struct
+(entity field) by calling :c:func:`media_entity_pads_init`:
+
+.. code-block:: c
+
+	struct media_pad *pad = &my_vdev->pad;
+	int err;
+
+	err = media_entity_pads_init(&vdev->entity, 1, pad);
+
+The pads array must have been previously initialized. There is no need to
+manually set the struct media_entity type and name fields.
+
+A reference to the entity will be automatically acquired/released when the
+video device is opened/closed.
+
+ioctls and locking
+------------------
+
+The V4L core provides optional locking services. The main service is the
+lock field in struct :c:type:`video_device`, which is a pointer to a mutex.
+If you set this pointer, then that will be used by unlocked_ioctl to
+serialize all ioctls.
+
+If you are using the :ref:`videobuf2 framework <vb2_framework>`, then there
+is a second lock that you can set: :c:type:`video_device`->queue->lock. If
+set, then this lock will be used instead of :c:type:`video_device`->lock
+to serialize all queuing ioctls (see the previous section
+for the full list of those ioctls).
+
+The advantage of using a different lock for the queuing ioctls is that for some
+drivers (particularly USB drivers) certain commands such as setting controls
+can take a long time, so you want to use a separate lock for the buffer queuing
+ioctls. That way your ``VIDIOC_DQBUF`` doesn't stall because the driver is busy
+changing the e.g. exposure of the webcam.
+
+Of course, you can always do all the locking yourself by leaving both lock
+pointers at ``NULL``.
+
+If you use the old :ref:`videobuf framework <vb_framework>` then you must
+pass the :c:type:`video_device`->lock to the videobuf queue initialize
+function: if videobuf has to wait for a frame to arrive, then it will
+temporarily unlock the lock and relock it afterwards. If your driver also
+waits in the code, then you should do the same to allow other
+processes to access the device node while the first process is waiting for
+something.
+
+In the case of :ref:`videobuf2 <vb2_framework>` you will need to implement the
+``wait_prepare()`` and ``wait_finish()`` callbacks to unlock/lock if applicable.
+If you use the ``queue->lock`` pointer, then you can use the helper functions
+:c:func:`vb2_ops_wait_prepare` and :c:func:`vb2_ops_wait_finish`.
+
+The implementation of a hotplug disconnect should also take the lock from
+:c:type:`video_device` before calling v4l2_device_disconnect. If you are also
+using :c:type:`video_device`->queue->lock, then you have to first lock
+:c:type:`video_device`->queue->lock followed by :c:type:`video_device`->lock.
+That way you can be sure no ioctl is running when you call
+:c:func:`v4l2_device_disconnect`.
+
+Video device registration
+-------------------------
+
+Next you register the video device with :c:func:`video_register_device`.
+This will create the character device for you.
+
+.. code-block:: c
+
+	err = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
+	if (err) {
+		video_device_release(vdev); /* or kfree(my_vdev); */
+		return err;
+	}
+
+If the :c:type:`v4l2_device` parent device has a not ``NULL`` mdev field,
+the video device entity will be automatically registered with the media
+device.
+
+Which device is registered depends on the type argument. The following
+types exist:
+
+========================== ====================	 ==============================
+:c:type:`vfl_devnode_type` Device name		 Usage
+========================== ====================	 ==============================
+``VFL_TYPE_VIDEO``         ``/dev/videoX``       for video input/output devices
+``VFL_TYPE_VBI``           ``/dev/vbiX``         for vertical blank data (i.e.
+						 closed captions, teletext)
+``VFL_TYPE_RADIO``         ``/dev/radioX``       for radio tuners
+``VFL_TYPE_SUBDEV``        ``/dev/v4l-subdevX``  for V4L2 subdevices
+``VFL_TYPE_SDR``           ``/dev/swradioX``     for Software Defined Radio
+						 (SDR) tuners
+``VFL_TYPE_TOUCH``         ``/dev/v4l-touchX``   for touch sensors
+========================== ====================	 ==============================
+
+The last argument gives you a certain amount of control over the device
+device node number used (i.e. the X in ``videoX``). Normally you will pass -1
+to let the v4l2 framework pick the first free number. But sometimes users
+want to select a specific node number. It is common that drivers allow
+the user to select a specific device node number through a driver module
+option. That number is then passed to this function and video_register_device
+will attempt to select that device node number. If that number was already
+in use, then the next free device node number will be selected and it
+will send a warning to the kernel log.
+
+Another use-case is if a driver creates many devices. In that case it can
+be useful to place different video devices in separate ranges. For example,
+video capture devices start at 0, video output devices start at 16.
+So you can use the last argument to specify a minimum device node number
+and the v4l2 framework will try to pick the first free number that is equal
+or higher to what you passed. If that fails, then it will just pick the
+first free number.
+
+Since in this case you do not care about a warning about not being able
+to select the specified device node number, you can call the function
+:c:func:`video_register_device_no_warn` instead.
+
+Whenever a device node is created some attributes are also created for you.
+If you look in ``/sys/class/video4linux`` you see the devices. Go into e.g.
+``video0`` and you will see 'name', 'dev_debug' and 'index' attributes. The
+'name' attribute is the 'name' field of the video_device struct. The
+'dev_debug' attribute can be used to enable core debugging. See the next
+section for more detailed information on this.
+
+The 'index' attribute is the index of the device node: for each call to
+:c:func:`video_register_device()` the index is just increased by 1. The
+first video device node you register always starts with index 0.
+
+Users can setup udev rules that utilize the index attribute to make fancy
+device names (e.g. '``mpegX``' for MPEG video capture device nodes).
+
+After the device was successfully registered, then you can use these fields:
+
+- :c:type:`video_device`->vfl_type: the device type passed to
+  :c:func:`video_register_device`.
+- :c:type:`video_device`->minor: the assigned device minor number.
+- :c:type:`video_device`->num: the device node number (i.e. the X in
+  ``videoX``).
+- :c:type:`video_device`->index: the device index number.
+
+If the registration failed, then you need to call
+:c:func:`video_device_release` to free the allocated :c:type:`video_device`
+struct, or free your own struct if the :c:type:`video_device` was embedded in
+it. The ``vdev->release()`` callback will never be called if the registration
+failed, nor should you ever attempt to unregister the device if the
+registration failed.
+
+video device debugging
+----------------------
+
+The 'dev_debug' attribute that is created for each video, vbi, radio or swradio
+device in ``/sys/class/video4linux/<devX>/`` allows you to enable logging of
+file operations.
+
+It is a bitmask and the following bits can be set:
+
+.. tabularcolumns:: |p{5ex}|L|
+
+===== ================================================================
+Mask  Description
+===== ================================================================
+0x01  Log the ioctl name and error code. VIDIOC_(D)QBUF ioctls are
+      only logged if bit 0x08 is also set.
+0x02  Log the ioctl name arguments and error code. VIDIOC_(D)QBUF
+      ioctls are
+      only logged if bit 0x08 is also set.
+0x04  Log the file operations open, release, read, write, mmap and
+      get_unmapped_area. The read and write operations are only
+      logged if bit 0x08 is also set.
+0x08  Log the read and write file operations and the VIDIOC_QBUF and
+      VIDIOC_DQBUF ioctls.
+0x10  Log the poll file operation.
+0x20  Log error and messages in the control operations.
+===== ================================================================
+
+Video device cleanup
+--------------------
+
+When the video device nodes have to be removed, either during the unload
+of the driver or because the USB device was disconnected, then you should
+unregister them with:
+
+	:c:func:`video_unregister_device`
+	(:c:type:`vdev <video_device>`);
+
+This will remove the device nodes from sysfs (causing udev to remove them
+from ``/dev``).
+
+After :c:func:`video_unregister_device` returns no new opens can be done.
+However, in the case of USB devices some application might still have one of
+these device nodes open. So after the unregister all file operations (except
+release, of course) will return an error as well.
+
+When the last user of the video device node exits, then the ``vdev->release()``
+callback is called and you can do the final cleanup there.
+
+Don't forget to cleanup the media entity associated with the video device if
+it has been initialized:
+
+	:c:func:`media_entity_cleanup <media_entity_cleanup>`
+	(&vdev->entity);
+
+This can be done from the release callback.
+
+
+helper functions
+----------------
+
+There are a few useful helper functions:
+
+- file and :c:type:`video_device` private data
+
+You can set/get driver private data in the video_device struct using:
+
+	:c:func:`video_get_drvdata <video_get_drvdata>`
+	(:c:type:`vdev <video_device>`);
+
+	:c:func:`video_set_drvdata <video_set_drvdata>`
+	(:c:type:`vdev <video_device>`);
+
+Note that you can safely call :c:func:`video_set_drvdata` before calling
+:c:func:`video_register_device`.
+
+And this function:
+
+	:c:func:`video_devdata <video_devdata>`
+	(struct file \*file);
+
+returns the video_device belonging to the file struct.
+
+The :c:func:`video_devdata` function combines :c:func:`video_get_drvdata`
+with :c:func:`video_devdata`:
+
+	:c:func:`video_drvdata <video_drvdata>`
+	(struct file \*file);
+
+You can go from a :c:type:`video_device` struct to the v4l2_device struct using:
+
+.. code-block:: c
+
+	struct v4l2_device *v4l2_dev = vdev->v4l2_dev;
+
+- Device node name
+
+The :c:type:`video_device` node kernel name can be retrieved using:
+
+	:c:func:`video_device_node_name <video_device_node_name>`
+	(:c:type:`vdev <video_device>`);
+
+The name is used as a hint by userspace tools such as udev. The function
+should be used where possible instead of accessing the video_device::num and
+video_device::minor fields.
+
+video_device functions and data structures
+------------------------------------------
+
+.. kernel-doc:: include/media/v4l2-dev.h
diff --git a/Documentation/driver-api/media/v4l2-device.rst b/Documentation/driver-api/media/v4l2-device.rst
new file mode 100644
index 000000000000..5e25bf182c18
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-device.rst
@@ -0,0 +1,146 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 device instance
+--------------------
+
+Each device instance is represented by a struct :c:type:`v4l2_device`.
+Very simple devices can just allocate this struct, but most of the time you
+would embed this struct inside a larger struct.
+
+You must register the device instance by calling:
+
+	:c:func:`v4l2_device_register <v4l2_device_register>`
+	(dev, :c:type:`v4l2_dev <v4l2_device>`).
+
+Registration will initialize the :c:type:`v4l2_device` struct. If the
+dev->driver_data field is ``NULL``, it will be linked to
+:c:type:`v4l2_dev <v4l2_device>` argument.
+
+Drivers that want integration with the media device framework need to set
+dev->driver_data manually to point to the driver-specific device structure
+that embed the struct :c:type:`v4l2_device` instance. This is achieved by a
+``dev_set_drvdata()`` call before registering the V4L2 device instance.
+They must also set the struct :c:type:`v4l2_device` mdev field to point to a
+properly initialized and registered :c:type:`media_device` instance.
+
+If :c:type:`v4l2_dev <v4l2_device>`\ ->name is empty then it will be set to a
+value derived from dev (driver name followed by the bus_id, to be precise).
+If you set it up before  calling :c:func:`v4l2_device_register` then it will
+be untouched. If dev is ``NULL``, then you **must** setup
+:c:type:`v4l2_dev <v4l2_device>`\ ->name before calling
+:c:func:`v4l2_device_register`.
+
+You can use :c:func:`v4l2_device_set_name` to set the name based on a driver
+name and a driver-global atomic_t instance. This will generate names like
+``ivtv0``, ``ivtv1``, etc. If the name ends with a digit, then it will insert
+a dash: ``cx18-0``, ``cx18-1``, etc. This function returns the instance number.
+
+The first ``dev`` argument is normally the ``struct device`` pointer of a
+``pci_dev``, ``usb_interface`` or ``platform_device``. It is rare for dev to
+be ``NULL``, but it happens with ISA devices or when one device creates
+multiple PCI devices, thus making it impossible to associate
+:c:type:`v4l2_dev <v4l2_device>` with a particular parent.
+
+You can also supply a ``notify()`` callback that can be called by sub-devices
+to notify you of events. Whether you need to set this depends on the
+sub-device. Any notifications a sub-device supports must be defined in a header
+in ``include/media/subdevice.h``.
+
+V4L2 devices are unregistered by calling:
+
+	:c:func:`v4l2_device_unregister`
+	(:c:type:`v4l2_dev <v4l2_device>`).
+
+If the dev->driver_data field points to :c:type:`v4l2_dev <v4l2_device>`,
+it will be reset to ``NULL``. Unregistering will also automatically unregister
+all subdevs from the device.
+
+If you have a hotpluggable device (e.g. a USB device), then when a disconnect
+happens the parent device becomes invalid. Since :c:type:`v4l2_device` has a
+pointer to that parent device it has to be cleared as well to mark that the
+parent is gone. To do this call:
+
+	:c:func:`v4l2_device_disconnect`
+	(:c:type:`v4l2_dev <v4l2_device>`).
+
+This does *not* unregister the subdevs, so you still need to call the
+:c:func:`v4l2_device_unregister` function for that. If your driver is not
+hotpluggable, then there is no need to call :c:func:`v4l2_device_disconnect`.
+
+Sometimes you need to iterate over all devices registered by a specific
+driver. This is usually the case if multiple device drivers use the same
+hardware. E.g. the ivtvfb driver is a framebuffer driver that uses the ivtv
+hardware. The same is true for alsa drivers for example.
+
+You can iterate over all registered devices as follows:
+
+.. code-block:: c
+
+	static int callback(struct device *dev, void *p)
+	{
+		struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
+
+		/* test if this device was inited */
+		if (v4l2_dev == NULL)
+			return 0;
+		...
+		return 0;
+	}
+
+	int iterate(void *p)
+	{
+		struct device_driver *drv;
+		int err;
+
+		/* Find driver 'ivtv' on the PCI bus.
+		pci_bus_type is a global. For USB buses use usb_bus_type. */
+		drv = driver_find("ivtv", &pci_bus_type);
+		/* iterate over all ivtv device instances */
+		err = driver_for_each_device(drv, NULL, p, callback);
+		put_driver(drv);
+		return err;
+	}
+
+Sometimes you need to keep a running counter of the device instance. This is
+commonly used to map a device instance to an index of a module option array.
+
+The recommended approach is as follows:
+
+.. code-block:: c
+
+	static atomic_t drv_instance = ATOMIC_INIT(0);
+
+	static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+	{
+		...
+		state->instance = atomic_inc_return(&drv_instance) - 1;
+	}
+
+If you have multiple device nodes then it can be difficult to know when it is
+safe to unregister :c:type:`v4l2_device` for hotpluggable devices. For this
+purpose :c:type:`v4l2_device` has refcounting support. The refcount is
+increased whenever :c:func:`video_register_device` is called and it is
+decreased whenever that device node is released. When the refcount reaches
+zero, then the :c:type:`v4l2_device` release() callback is called. You can
+do your final cleanup there.
+
+If other device nodes (e.g. ALSA) are created, then you can increase and
+decrease the refcount manually as well by calling:
+
+	:c:func:`v4l2_device_get`
+	(:c:type:`v4l2_dev <v4l2_device>`).
+
+or:
+
+	:c:func:`v4l2_device_put`
+	(:c:type:`v4l2_dev <v4l2_device>`).
+
+Since the initial refcount is 1 you also need to call
+:c:func:`v4l2_device_put` in the ``disconnect()`` callback (for USB devices)
+or in the ``remove()`` callback (for e.g. PCI devices), otherwise the refcount
+will never reach 0.
+
+v4l2_device functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-device.h
diff --git a/Documentation/driver-api/media/v4l2-dv-timings.rst b/Documentation/driver-api/media/v4l2-dv-timings.rst
new file mode 100644
index 000000000000..b178f931518b
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-dv-timings.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 DV Timings functions
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-dv-timings.h
diff --git a/Documentation/driver-api/media/v4l2-event.rst b/Documentation/driver-api/media/v4l2-event.rst
new file mode 100644
index 000000000000..a4b7ae2b94d8
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-event.rst
@@ -0,0 +1,181 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 events
+-----------
+
+The V4L2 events provide a generic way to pass events to user space.
+The driver must use :c:type:`v4l2_fh` to be able to support V4L2 events.
+
+Events are subscribed per-filehandle. An event specification consists of a
+``type`` and is optionally associated with an object identified through the
+``id`` field. If unused, then the ``id`` is 0. So an event is uniquely
+identified by the ``(type, id)`` tuple.
+
+The :c:type:`v4l2_fh` struct has a list of subscribed events on its
+``subscribed`` field.
+
+When the user subscribes to an event, a :c:type:`v4l2_subscribed_event`
+struct is added to :c:type:`v4l2_fh`\ ``.subscribed``, one for every
+subscribed event.
+
+Each :c:type:`v4l2_subscribed_event` struct ends with a
+:c:type:`v4l2_kevent` ringbuffer, with the size given by the caller
+of :c:func:`v4l2_event_subscribe`. This ringbuffer is used to store any events
+raised by the driver.
+
+So every ``(type, ID)`` event tuple will have its own
+:c:type:`v4l2_kevent` ringbuffer. This guarantees that if a driver is
+generating lots of events of one type in a short time, then that will
+not overwrite events of another type.
+
+But if you get more events of one type than the size of the
+:c:type:`v4l2_kevent` ringbuffer, then the oldest event will be dropped
+and the new one added.
+
+The :c:type:`v4l2_kevent` struct links into the ``available``
+list of the :c:type:`v4l2_fh` struct so :ref:`VIDIOC_DQEVENT` will
+know which event to dequeue first.
+
+Finally, if the event subscription is associated with a particular object
+such as a V4L2 control, then that object needs to know about that as well
+so that an event can be raised by that object. So the ``node`` field can
+be used to link the :c:type:`v4l2_subscribed_event` struct into a list of
+such objects.
+
+So to summarize:
+
+- struct :c:type:`v4l2_fh` has two lists: one of the ``subscribed`` events,
+  and one of the ``available`` events.
+
+- struct :c:type:`v4l2_subscribed_event` has a ringbuffer of raised
+  (pending) events of that particular type.
+
+- If struct :c:type:`v4l2_subscribed_event` is associated with a specific
+  object, then that object will have an internal list of
+  struct :c:type:`v4l2_subscribed_event` so it knows who subscribed an
+  event to that object.
+
+Furthermore, the internal struct :c:type:`v4l2_subscribed_event` has
+``merge()`` and ``replace()`` callbacks which drivers can set. These
+callbacks are called when a new event is raised and there is no more room.
+
+The ``replace()`` callback allows you to replace the payload of the old event
+with that of the new event, merging any relevant data from the old payload
+into the new payload that replaces it. It is called when this event type has
+a ringbuffer with size is one, i.e. only one event can be stored in the
+ringbuffer.
+
+The ``merge()`` callback allows you to merge the oldest event payload into
+that of the second-oldest event payload. It is called when
+the ringbuffer has size is greater than one.
+
+This way no status information is lost, just the intermediate steps leading
+up to that state.
+
+A good example of these ``replace``/``merge`` callbacks is in v4l2-event.c:
+``ctrls_replace()`` and ``ctrls_merge()`` callbacks for the control event.
+
+.. note::
+	these callbacks can be called from interrupt context, so they must
+	be fast.
+
+In order to queue events to video device, drivers should call:
+
+	:c:func:`v4l2_event_queue <v4l2_event_queue>`
+	(:c:type:`vdev <video_device>`, :c:type:`ev <v4l2_event>`)
+
+The driver's only responsibility is to fill in the type and the data fields.
+The other fields will be filled in by V4L2.
+
+Event subscription
+~~~~~~~~~~~~~~~~~~
+
+Subscribing to an event is via:
+
+	:c:func:`v4l2_event_subscribe <v4l2_event_subscribe>`
+	(:c:type:`fh <v4l2_fh>`, :c:type:`sub <v4l2_event_subscription>` ,
+	elems, :c:type:`ops <v4l2_subscribed_event_ops>`)
+
+
+This function is used to implement :c:type:`video_device`->
+:c:type:`ioctl_ops <v4l2_ioctl_ops>`-> ``vidioc_subscribe_event``,
+but the driver must check first if the driver is able to produce events
+with specified event id, and then should call
+:c:func:`v4l2_event_subscribe` to subscribe the event.
+
+The elems argument is the size of the event queue for this event. If it is 0,
+then the framework will fill in a default value (this depends on the event
+type).
+
+The ops argument allows the driver to specify a number of callbacks:
+
+.. tabularcolumns:: |p{1.5cm}|p{16.0cm}|
+
+======== ==============================================================
+Callback Description
+======== ==============================================================
+add      called when a new listener gets added (subscribing to the same
+	 event twice will only cause this callback to get called once)
+del      called when a listener stops listening
+replace  replace event 'old' with event 'new'.
+merge    merge event 'old' into event 'new'.
+======== ==============================================================
+
+All 4 callbacks are optional, if you don't want to specify any callbacks
+the ops argument itself maybe ``NULL``.
+
+Unsubscribing an event
+~~~~~~~~~~~~~~~~~~~~~~
+
+Unsubscribing to an event is via:
+
+	:c:func:`v4l2_event_unsubscribe <v4l2_event_unsubscribe>`
+	(:c:type:`fh <v4l2_fh>`, :c:type:`sub <v4l2_event_subscription>`)
+
+This function is used to implement :c:type:`video_device`->
+:c:type:`ioctl_ops <v4l2_ioctl_ops>`-> ``vidioc_unsubscribe_event``.
+A driver may call :c:func:`v4l2_event_unsubscribe` directly unless it
+wants to be involved in unsubscription process.
+
+The special type ``V4L2_EVENT_ALL`` may be used to unsubscribe all events. The
+drivers may want to handle this in a special way.
+
+Check if there's a pending event
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Checking if there's a pending event is via:
+
+	:c:func:`v4l2_event_pending <v4l2_event_pending>`
+	(:c:type:`fh <v4l2_fh>`)
+
+
+This function returns the number of pending events. Useful when implementing
+poll.
+
+How events work
+~~~~~~~~~~~~~~~
+
+Events are delivered to user space through the poll system call. The driver
+can use :c:type:`v4l2_fh`->wait (a wait_queue_head_t) as the argument for
+``poll_wait()``.
+
+There are standard and private events. New standard events must use the
+smallest available event type. The drivers must allocate their events from
+their own class starting from class base. Class base is
+``V4L2_EVENT_PRIVATE_START`` + n * 1000 where n is the lowest available number.
+The first event type in the class is reserved for future use, so the first
+available event type is 'class base + 1'.
+
+An example on how the V4L2 events may be used can be found in the OMAP
+3 ISP driver (``drivers/media/platform/omap3isp``).
+
+A subdev can directly send an event to the :c:type:`v4l2_device` notify
+function with ``V4L2_DEVICE_NOTIFY_EVENT``. This allows the bridge to map
+the subdev that sends the event to the video node(s) associated with the
+subdev that need to be informed about such an event.
+
+V4L2 event functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-event.h
+
diff --git a/Documentation/driver-api/media/v4l2-fh.rst b/Documentation/driver-api/media/v4l2-fh.rst
new file mode 100644
index 000000000000..4c62b19af744
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-fh.rst
@@ -0,0 +1,141 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 File handlers
+------------------
+
+struct :c:type:`v4l2_fh` provides a way to easily keep file handle specific
+data that is used by the V4L2 framework.
+
+.. attention::
+	New drivers must use struct :c:type:`v4l2_fh`
+	since it is also used to implement priority handling
+	(:ref:`VIDIOC_G_PRIORITY`).
+
+The users of :c:type:`v4l2_fh` (in the V4L2 framework, not the driver) know
+whether a driver uses :c:type:`v4l2_fh` as its ``file->private_data`` pointer
+by testing the ``V4L2_FL_USES_V4L2_FH`` bit in :c:type:`video_device`->flags.
+This bit is set whenever :c:func:`v4l2_fh_init` is called.
+
+struct :c:type:`v4l2_fh` is allocated as a part of the driver's own file handle
+structure and ``file->private_data`` is set to it in the driver's ``open()``
+function by the driver.
+
+In many cases the struct :c:type:`v4l2_fh` will be embedded in a larger
+structure. In that case you should call:
+
+#) :c:func:`v4l2_fh_init` and :c:func:`v4l2_fh_add` in ``open()``
+#) :c:func:`v4l2_fh_del` and :c:func:`v4l2_fh_exit` in ``release()``
+
+Drivers can extract their own file handle structure by using the container_of
+macro.
+
+Example:
+
+.. code-block:: c
+
+	struct my_fh {
+		int blah;
+		struct v4l2_fh fh;
+	};
+
+	...
+
+	int my_open(struct file *file)
+	{
+		struct my_fh *my_fh;
+		struct video_device *vfd;
+		int ret;
+
+		...
+
+		my_fh = kzalloc(sizeof(*my_fh), GFP_KERNEL);
+
+		...
+
+		v4l2_fh_init(&my_fh->fh, vfd);
+
+		...
+
+		file->private_data = &my_fh->fh;
+		v4l2_fh_add(&my_fh->fh);
+		return 0;
+	}
+
+	int my_release(struct file *file)
+	{
+		struct v4l2_fh *fh = file->private_data;
+		struct my_fh *my_fh = container_of(fh, struct my_fh, fh);
+
+		...
+		v4l2_fh_del(&my_fh->fh);
+		v4l2_fh_exit(&my_fh->fh);
+		kfree(my_fh);
+		return 0;
+	}
+
+Below is a short description of the :c:type:`v4l2_fh` functions used:
+
+:c:func:`v4l2_fh_init <v4l2_fh_init>`
+(:c:type:`fh <v4l2_fh>`, :c:type:`vdev <video_device>`)
+
+
+- Initialise the file handle. This **MUST** be performed in the driver's
+  :c:type:`v4l2_file_operations`->open() handler.
+
+
+:c:func:`v4l2_fh_add <v4l2_fh_add>`
+(:c:type:`fh <v4l2_fh>`)
+
+- Add a :c:type:`v4l2_fh` to :c:type:`video_device` file handle list.
+  Must be called once the file handle is completely initialized.
+
+:c:func:`v4l2_fh_del <v4l2_fh_del>`
+(:c:type:`fh <v4l2_fh>`)
+
+- Unassociate the file handle from :c:type:`video_device`. The file handle
+  exit function may now be called.
+
+:c:func:`v4l2_fh_exit <v4l2_fh_exit>`
+(:c:type:`fh <v4l2_fh>`)
+
+- Uninitialise the file handle. After uninitialisation the :c:type:`v4l2_fh`
+  memory can be freed.
+
+
+If struct :c:type:`v4l2_fh` is not embedded, then you can use these helper functions:
+
+:c:func:`v4l2_fh_open <v4l2_fh_open>`
+(struct file \*filp)
+
+- This allocates a struct :c:type:`v4l2_fh`, initializes it and adds it to
+  the struct :c:type:`video_device` associated with the file struct.
+
+:c:func:`v4l2_fh_release <v4l2_fh_release>`
+(struct file \*filp)
+
+- This deletes it from the struct :c:type:`video_device` associated with the
+  file struct, uninitialised the :c:type:`v4l2_fh` and frees it.
+
+These two functions can be plugged into the v4l2_file_operation's ``open()``
+and ``release()`` ops.
+
+Several drivers need to do something when the first file handle is opened and
+when the last file handle closes. Two helper functions were added to check
+whether the :c:type:`v4l2_fh` struct is the only open filehandle of the
+associated device node:
+
+:c:func:`v4l2_fh_is_singular <v4l2_fh_is_singular>`
+(:c:type:`fh <v4l2_fh>`)
+
+-  Returns 1 if the file handle is the only open file handle, else 0.
+
+:c:func:`v4l2_fh_is_singular_file <v4l2_fh_is_singular_file>`
+(struct file \*filp)
+
+- Same, but it calls v4l2_fh_is_singular with filp->private_data.
+
+
+V4L2 fh functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-fh.h
diff --git a/Documentation/driver-api/media/v4l2-flash-led-class.rst b/Documentation/driver-api/media/v4l2-flash-led-class.rst
new file mode 100644
index 000000000000..2aa6bed9b8db
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-flash-led-class.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 flash functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-flash-led-class.h
diff --git a/Documentation/driver-api/media/v4l2-fwnode.rst b/Documentation/driver-api/media/v4l2-fwnode.rst
new file mode 100644
index 000000000000..e313b6cddcd0
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-fwnode.rst
@@ -0,0 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 fwnode kAPI
+^^^^^^^^^^^^^^^^
+.. kernel-doc:: include/media/v4l2-fwnode.h
diff --git a/Documentation/driver-api/media/v4l2-intro.rst b/Documentation/driver-api/media/v4l2-intro.rst
new file mode 100644
index 000000000000..4d54fa9d7a12
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-intro.rst
@@ -0,0 +1,76 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Introduction
+------------
+
+The V4L2 drivers tend to be very complex due to the complexity of the
+hardware: most devices have multiple ICs, export multiple device nodes in
+/dev, and create also non-V4L2 devices such as DVB, ALSA, FB, I2C and input
+(IR) devices.
+
+Especially the fact that V4L2 drivers have to setup supporting ICs to
+do audio/video muxing/encoding/decoding makes it more complex than most.
+Usually these ICs are connected to the main bridge driver through one or
+more I2C buses, but other buses can also be used. Such devices are
+called 'sub-devices'.
+
+For a long time the framework was limited to the video_device struct for
+creating V4L device nodes and video_buf for handling the video buffers
+(note that this document does not discuss the video_buf framework).
+
+This meant that all drivers had to do the setup of device instances and
+connecting to sub-devices themselves. Some of this is quite complicated
+to do right and many drivers never did do it correctly.
+
+There is also a lot of common code that could never be refactored due to
+the lack of a framework.
+
+So this framework sets up the basic building blocks that all drivers
+need and this same framework should make it much easier to refactor
+common code into utility functions shared by all drivers.
+
+A good example to look at as a reference is the v4l2-pci-skeleton.c
+source that is available in samples/v4l/. It is a skeleton driver for
+a PCI capture card, and demonstrates how to use the V4L2 driver
+framework. It can be used as a template for real PCI video capture driver.
+
+Structure of a V4L driver
+-------------------------
+
+All drivers have the following structure:
+
+1) A struct for each device instance containing the device state.
+
+2) A way of initializing and commanding sub-devices (if any).
+
+3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX and /dev/radioX)
+   and keeping track of device-node specific data.
+
+4) Filehandle-specific structs containing per-filehandle data;
+
+5) video buffer handling.
+
+This is a rough schematic of how it all relates:
+
+.. code-block:: none
+
+    device instances
+      |
+      +-sub-device instances
+      |
+      \-V4L2 device nodes
+	  |
+	  \-filehandle instances
+
+
+Structure of the V4L2 framework
+-------------------------------
+
+The framework closely resembles the driver structure: it has a v4l2_device
+struct for the device instance data, a v4l2_subdev struct to refer to
+sub-device instances, the video_device struct stores V4L2 device node data
+and the v4l2_fh struct keeps track of filehandle instances.
+
+The V4L2 framework also optionally integrates with the media framework. If a
+driver sets the struct v4l2_device mdev field, sub-devices and video nodes
+will automatically appear in the media framework as entities.
diff --git a/Documentation/driver-api/media/v4l2-mc.rst b/Documentation/driver-api/media/v4l2-mc.rst
new file mode 100644
index 000000000000..0c352ac588b2
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-mc.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 Media Controller functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-mc.h
diff --git a/Documentation/driver-api/media/v4l2-mediabus.rst b/Documentation/driver-api/media/v4l2-mediabus.rst
new file mode 100644
index 000000000000..1f2254cba92d
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-mediabus.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 Media Bus functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-mediabus.h
diff --git a/Documentation/driver-api/media/v4l2-mem2mem.rst b/Documentation/driver-api/media/v4l2-mem2mem.rst
new file mode 100644
index 000000000000..a43b31cc8261
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-mem2mem.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 Memory to Memory functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-mem2mem.h
diff --git a/Documentation/driver-api/media/v4l2-rect.rst b/Documentation/driver-api/media/v4l2-rect.rst
new file mode 100644
index 000000000000..fc315cd84156
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-rect.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 rect helper functions
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/v4l2-rect.h
diff --git a/Documentation/driver-api/media/v4l2-subdev.rst b/Documentation/driver-api/media/v4l2-subdev.rst
new file mode 100644
index 000000000000..29e07e23f888
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-subdev.rst
@@ -0,0 +1,444 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+V4L2 sub-devices
+----------------
+
+Many drivers need to communicate with sub-devices. These devices can do all
+sort of tasks, but most commonly they handle audio and/or video muxing,
+encoding or decoding. For webcams common sub-devices are sensors and camera
+controllers.
+
+Usually these are I2C devices, but not necessarily. In order to provide the
+driver with a consistent interface to these sub-devices the
+:c:type:`v4l2_subdev` struct (v4l2-subdev.h) was created.
+
+Each sub-device driver must have a :c:type:`v4l2_subdev` struct. This struct
+can be stand-alone for simple sub-devices or it might be embedded in a larger
+struct if more state information needs to be stored. Usually there is a
+low-level device struct (e.g. ``i2c_client``) that contains the device data as
+setup by the kernel. It is recommended to store that pointer in the private
+data of :c:type:`v4l2_subdev` using :c:func:`v4l2_set_subdevdata`. That makes
+it easy to go from a :c:type:`v4l2_subdev` to the actual low-level bus-specific
+device data.
+
+You also need a way to go from the low-level struct to :c:type:`v4l2_subdev`.
+For the common i2c_client struct the i2c_set_clientdata() call is used to store
+a :c:type:`v4l2_subdev` pointer, for other buses you may have to use other
+methods.
+
+Bridges might also need to store per-subdev private data, such as a pointer to
+bridge-specific per-subdev private data. The :c:type:`v4l2_subdev` structure
+provides host private data for that purpose that can be accessed with
+:c:func:`v4l2_get_subdev_hostdata` and :c:func:`v4l2_set_subdev_hostdata`.
+
+From the bridge driver perspective, you load the sub-device module and somehow
+obtain the :c:type:`v4l2_subdev` pointer. For i2c devices this is easy: you call
+``i2c_get_clientdata()``. For other buses something similar needs to be done.
+Helper functions exists for sub-devices on an I2C bus that do most of this
+tricky work for you.
+
+Each :c:type:`v4l2_subdev` contains function pointers that sub-device drivers
+can implement (or leave ``NULL`` if it is not applicable). Since sub-devices can
+do so many different things and you do not want to end up with a huge ops struct
+of which only a handful of ops are commonly implemented, the function pointers
+are sorted according to category and each category has its own ops struct.
+
+The top-level ops struct contains pointers to the category ops structs, which
+may be NULL if the subdev driver does not support anything from that category.
+
+It looks like this:
+
+.. code-block:: c
+
+	struct v4l2_subdev_core_ops {
+		int (*log_status)(struct v4l2_subdev *sd);
+		int (*init)(struct v4l2_subdev *sd, u32 val);
+		...
+	};
+
+	struct v4l2_subdev_tuner_ops {
+		...
+	};
+
+	struct v4l2_subdev_audio_ops {
+		...
+	};
+
+	struct v4l2_subdev_video_ops {
+		...
+	};
+
+	struct v4l2_subdev_pad_ops {
+		...
+	};
+
+	struct v4l2_subdev_ops {
+		const struct v4l2_subdev_core_ops  *core;
+		const struct v4l2_subdev_tuner_ops *tuner;
+		const struct v4l2_subdev_audio_ops *audio;
+		const struct v4l2_subdev_video_ops *video;
+		const struct v4l2_subdev_pad_ops *video;
+	};
+
+The core ops are common to all subdevs, the other categories are implemented
+depending on the sub-device. E.g. a video device is unlikely to support the
+audio ops and vice versa.
+
+This setup limits the number of function pointers while still making it easy
+to add new ops and categories.
+
+A sub-device driver initializes the :c:type:`v4l2_subdev` struct using:
+
+	:c:func:`v4l2_subdev_init <v4l2_subdev_init>`
+	(:c:type:`sd <v4l2_subdev>`, &\ :c:type:`ops <v4l2_subdev_ops>`).
+
+
+Afterwards you need to initialize :c:type:`sd <v4l2_subdev>`->name with a
+unique name and set the module owner. This is done for you if you use the
+i2c helper functions.
+
+If integration with the media framework is needed, you must initialize the
+:c:type:`media_entity` struct embedded in the :c:type:`v4l2_subdev` struct
+(entity field) by calling :c:func:`media_entity_pads_init`, if the entity has
+pads:
+
+.. code-block:: c
+
+	struct media_pad *pads = &my_sd->pads;
+	int err;
+
+	err = media_entity_pads_init(&sd->entity, npads, pads);
+
+The pads array must have been previously initialized. There is no need to
+manually set the struct :c:type:`media_entity` function and name fields, but the
+revision field must be initialized if needed.
+
+A reference to the entity will be automatically acquired/released when the
+subdev device node (if any) is opened/closed.
+
+Don't forget to cleanup the media entity before the sub-device is destroyed:
+
+.. code-block:: c
+
+	media_entity_cleanup(&sd->entity);
+
+If the subdev driver intends to process video and integrate with the media
+framework, it must implement format related functionality using
+:c:type:`v4l2_subdev_pad_ops` instead of :c:type:`v4l2_subdev_video_ops`.
+
+In that case, the subdev driver may set the link_validate field to provide
+its own link validation function. The link validation function is called for
+every link in the pipeline where both of the ends of the links are V4L2
+sub-devices. The driver is still responsible for validating the correctness
+of the format configuration between sub-devices and video nodes.
+
+If link_validate op is not set, the default function
+:c:func:`v4l2_subdev_link_validate_default` is used instead. This function
+ensures that width, height and the media bus pixel code are equal on both source
+and sink of the link. Subdev drivers are also free to use this function to
+perform the checks mentioned above in addition to their own checks.
+
+There are currently two ways to register subdevices with the V4L2 core. The
+first (traditional) possibility is to have subdevices registered by bridge
+drivers. This can be done when the bridge driver has the complete information
+about subdevices connected to it and knows exactly when to register them. This
+is typically the case for internal subdevices, like video data processing units
+within SoCs or complex PCI(e) boards, camera sensors in USB cameras or connected
+to SoCs, which pass information about them to bridge drivers, usually in their
+platform data.
+
+There are however also situations where subdevices have to be registered
+asynchronously to bridge devices. An example of such a configuration is a Device
+Tree based system where information about subdevices is made available to the
+system independently from the bridge devices, e.g. when subdevices are defined
+in DT as I2C device nodes. The API used in this second case is described further
+below.
+
+Using one or the other registration method only affects the probing process, the
+run-time bridge-subdevice interaction is in both cases the same.
+
+In the synchronous case a device (bridge) driver needs to register the
+:c:type:`v4l2_subdev` with the v4l2_device:
+
+	:c:func:`v4l2_device_register_subdev <v4l2_device_register_subdev>`
+	(:c:type:`v4l2_dev <v4l2_device>`, :c:type:`sd <v4l2_subdev>`).
+
+This can fail if the subdev module disappeared before it could be registered.
+After this function was called successfully the subdev->dev field points to
+the :c:type:`v4l2_device`.
+
+If the v4l2_device parent device has a non-NULL mdev field, the sub-device
+entity will be automatically registered with the media device.
+
+You can unregister a sub-device using:
+
+	:c:func:`v4l2_device_unregister_subdev <v4l2_device_unregister_subdev>`
+	(:c:type:`sd <v4l2_subdev>`).
+
+
+Afterwards the subdev module can be unloaded and
+:c:type:`sd <v4l2_subdev>`->dev == ``NULL``.
+
+You can call an ops function either directly:
+
+.. code-block:: c
+
+	err = sd->ops->core->g_std(sd, &norm);
+
+but it is better and easier to use this macro:
+
+.. code-block:: c
+
+	err = v4l2_subdev_call(sd, core, g_std, &norm);
+
+The macro will to the right ``NULL`` pointer checks and returns ``-ENODEV``
+if :c:type:`sd <v4l2_subdev>` is ``NULL``, ``-ENOIOCTLCMD`` if either
+:c:type:`sd <v4l2_subdev>`->core or :c:type:`sd <v4l2_subdev>`->core->g_std is ``NULL``, or the actual result of the
+:c:type:`sd <v4l2_subdev>`->ops->core->g_std ops.
+
+It is also possible to call all or a subset of the sub-devices:
+
+.. code-block:: c
+
+	v4l2_device_call_all(v4l2_dev, 0, core, g_std, &norm);
+
+Any subdev that does not support this ops is skipped and error results are
+ignored. If you want to check for errors use this:
+
+.. code-block:: c
+
+	err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_std, &norm);
+
+Any error except ``-ENOIOCTLCMD`` will exit the loop with that error. If no
+errors (except ``-ENOIOCTLCMD``) occurred, then 0 is returned.
+
+The second argument to both calls is a group ID. If 0, then all subdevs are
+called. If non-zero, then only those whose group ID match that value will
+be called. Before a bridge driver registers a subdev it can set
+:c:type:`sd <v4l2_subdev>`->grp_id to whatever value it wants (it's 0 by
+default). This value is owned by the bridge driver and the sub-device driver
+will never modify or use it.
+
+The group ID gives the bridge driver more control how callbacks are called.
+For example, there may be multiple audio chips on a board, each capable of
+changing the volume. But usually only one will actually be used when the
+user want to change the volume. You can set the group ID for that subdev to
+e.g. AUDIO_CONTROLLER and specify that as the group ID value when calling
+``v4l2_device_call_all()``. That ensures that it will only go to the subdev
+that needs it.
+
+If the sub-device needs to notify its v4l2_device parent of an event, then
+it can call ``v4l2_subdev_notify(sd, notification, arg)``. This macro checks
+whether there is a ``notify()`` callback defined and returns ``-ENODEV`` if not.
+Otherwise the result of the ``notify()`` call is returned.
+
+The advantage of using :c:type:`v4l2_subdev` is that it is a generic struct and
+does not contain any knowledge about the underlying hardware. So a driver might
+contain several subdevs that use an I2C bus, but also a subdev that is
+controlled through GPIO pins. This distinction is only relevant when setting
+up the device, but once the subdev is registered it is completely transparent.
+
+In the asynchronous case subdevice probing can be invoked independently of the
+bridge driver availability. The subdevice driver then has to verify whether all
+the requirements for a successful probing are satisfied. This can include a
+check for a master clock availability. If any of the conditions aren't satisfied
+the driver might decide to return ``-EPROBE_DEFER`` to request further reprobing
+attempts. Once all conditions are met the subdevice shall be registered using
+the :c:func:`v4l2_async_register_subdev` function. Unregistration is
+performed using the :c:func:`v4l2_async_unregister_subdev` call. Subdevices
+registered this way are stored in a global list of subdevices, ready to be
+picked up by bridge drivers.
+
+Bridge drivers in turn have to register a notifier object. This is
+performed using the :c:func:`v4l2_async_notifier_register` call. To
+unregister the notifier the driver has to call
+:c:func:`v4l2_async_notifier_unregister`. The former of the two functions
+takes two arguments: a pointer to struct :c:type:`v4l2_device` and a
+pointer to struct :c:type:`v4l2_async_notifier`.
+
+Before registering the notifier, bridge drivers must do two things:
+first, the notifier must be initialized using the
+:c:func:`v4l2_async_notifier_init`. Second, bridge drivers can then
+begin to form a list of subdevice descriptors that the bridge device
+needs for its operation. Subdevice descriptors are added to the notifier
+using the :c:func:`v4l2_async_notifier_add_subdev` call. This function
+takes two arguments: a pointer to struct :c:type:`v4l2_async_notifier`,
+and a pointer to the subdevice descripter, which is of type struct
+:c:type:`v4l2_async_subdev`.
+
+The V4L2 core will then use these descriptors to match asynchronously
+registered subdevices to them. If a match is detected the ``.bound()``
+notifier callback is called. After all subdevices have been located the
+.complete() callback is called. When a subdevice is removed from the
+system the .unbind() method is called. All three callbacks are optional.
+
+V4L2 sub-device userspace API
+-----------------------------
+
+Beside exposing a kernel API through the :c:type:`v4l2_subdev_ops` structure,
+V4L2 sub-devices can also be controlled directly by userspace applications.
+
+Device nodes named ``v4l-subdev``\ *X* can be created in ``/dev`` to access
+sub-devices directly. If a sub-device supports direct userspace configuration
+it must set the ``V4L2_SUBDEV_FL_HAS_DEVNODE`` flag before being registered.
+
+After registering sub-devices, the :c:type:`v4l2_device` driver can create
+device nodes for all registered sub-devices marked with
+``V4L2_SUBDEV_FL_HAS_DEVNODE`` by calling
+:c:func:`v4l2_device_register_subdev_nodes`. Those device nodes will be
+automatically removed when sub-devices are unregistered.
+
+The device node handles a subset of the V4L2 API.
+
+``VIDIOC_QUERYCTRL``,
+``VIDIOC_QUERYMENU``,
+``VIDIOC_G_CTRL``,
+``VIDIOC_S_CTRL``,
+``VIDIOC_G_EXT_CTRLS``,
+``VIDIOC_S_EXT_CTRLS`` and
+``VIDIOC_TRY_EXT_CTRLS``:
+
+	The controls ioctls are identical to the ones defined in V4L2. They
+	behave identically, with the only exception that they deal only with
+	controls implemented in the sub-device. Depending on the driver, those
+	controls can be also be accessed through one (or several) V4L2 device
+	nodes.
+
+``VIDIOC_DQEVENT``,
+``VIDIOC_SUBSCRIBE_EVENT`` and
+``VIDIOC_UNSUBSCRIBE_EVENT``
+
+	The events ioctls are identical to the ones defined in V4L2. They
+	behave identically, with the only exception that they deal only with
+	events generated by the sub-device. Depending on the driver, those
+	events can also be reported by one (or several) V4L2 device nodes.
+
+	Sub-device drivers that want to use events need to set the
+	``V4L2_SUBDEV_USES_EVENTS`` :c:type:`v4l2_subdev`.flags and initialize
+	:c:type:`v4l2_subdev`.nevents to events queue depth before registering
+	the sub-device. After registration events can be queued as usual on the
+	:c:type:`v4l2_subdev`.devnode device node.
+
+	To properly support events, the ``poll()`` file operation is also
+	implemented.
+
+Private ioctls
+
+	All ioctls not in the above list are passed directly to the sub-device
+	driver through the core::ioctl operation.
+
+
+I2C sub-device drivers
+----------------------
+
+Since these drivers are so common, special helper functions are available to
+ease the use of these drivers (``v4l2-common.h``).
+
+The recommended method of adding :c:type:`v4l2_subdev` support to an I2C driver
+is to embed the :c:type:`v4l2_subdev` struct into the state struct that is
+created for each I2C device instance. Very simple devices have no state
+struct and in that case you can just create a :c:type:`v4l2_subdev` directly.
+
+A typical state struct would look like this (where 'chipname' is replaced by
+the name of the chip):
+
+.. code-block:: c
+
+	struct chipname_state {
+		struct v4l2_subdev sd;
+		...  /* additional state fields */
+	};
+
+Initialize the :c:type:`v4l2_subdev` struct as follows:
+
+.. code-block:: c
+
+	v4l2_i2c_subdev_init(&state->sd, client, subdev_ops);
+
+This function will fill in all the fields of :c:type:`v4l2_subdev` ensure that
+the :c:type:`v4l2_subdev` and i2c_client both point to one another.
+
+You should also add a helper inline function to go from a :c:type:`v4l2_subdev`
+pointer to a chipname_state struct:
+
+.. code-block:: c
+
+	static inline struct chipname_state *to_state(struct v4l2_subdev *sd)
+	{
+		return container_of(sd, struct chipname_state, sd);
+	}
+
+Use this to go from the :c:type:`v4l2_subdev` struct to the ``i2c_client``
+struct:
+
+.. code-block:: c
+
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+And this to go from an ``i2c_client`` to a :c:type:`v4l2_subdev` struct:
+
+.. code-block:: c
+
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+Make sure to call
+:c:func:`v4l2_device_unregister_subdev`\ (:c:type:`sd <v4l2_subdev>`)
+when the ``remove()`` callback is called. This will unregister the sub-device
+from the bridge driver. It is safe to call this even if the sub-device was
+never registered.
+
+You need to do this because when the bridge driver destroys the i2c adapter
+the ``remove()`` callbacks are called of the i2c devices on that adapter.
+After that the corresponding v4l2_subdev structures are invalid, so they
+have to be unregistered first. Calling
+:c:func:`v4l2_device_unregister_subdev`\ (:c:type:`sd <v4l2_subdev>`)
+from the ``remove()`` callback ensures that this is always done correctly.
+
+
+The bridge driver also has some helper functions it can use:
+
+.. code-block:: c
+
+	struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter,
+					"module_foo", "chipid", 0x36, NULL);
+
+This loads the given module (can be ``NULL`` if no module needs to be loaded)
+and calls :c:func:`i2c_new_device` with the given ``i2c_adapter`` and
+chip/address arguments. If all goes well, then it registers the subdev with
+the v4l2_device.
+
+You can also use the last argument of :c:func:`v4l2_i2c_new_subdev` to pass
+an array of possible I2C addresses that it should probe. These probe addresses
+are only used if the previous argument is 0. A non-zero argument means that you
+know the exact i2c address so in that case no probing will take place.
+
+Both functions return ``NULL`` if something went wrong.
+
+Note that the chipid you pass to :c:func:`v4l2_i2c_new_subdev` is usually
+the same as the module name. It allows you to specify a chip variant, e.g.
+"saa7114" or "saa7115". In general though the i2c driver autodetects this.
+The use of chipid is something that needs to be looked at more closely at a
+later date. It differs between i2c drivers and as such can be confusing.
+To see which chip variants are supported you can look in the i2c driver code
+for the i2c_device_id table. This lists all the possibilities.
+
+There are one more helper function:
+
+:c:func:`v4l2_i2c_new_subdev_board` uses an :c:type:`i2c_board_info` struct
+which is passed to the i2c driver and replaces the irq, platform_data and addr
+arguments.
+
+If the subdev supports the s_config core ops, then that op is called with
+the irq and platform_data arguments after the subdev was setup.
+
+The :c:func:`v4l2_i2c_new_subdev` function will call
+:c:func:`v4l2_i2c_new_subdev_board`, internally filling a
+:c:type:`i2c_board_info` structure using the ``client_type`` and the
+``addr`` to fill it.
+
+V4L2 sub-device functions and data structures
+---------------------------------------------
+
+.. kernel-doc:: include/media/v4l2-subdev.h
+
+.. kernel-doc:: include/media/v4l2-async.h
diff --git a/Documentation/driver-api/media/v4l2-tuner.rst b/Documentation/driver-api/media/v4l2-tuner.rst
new file mode 100644
index 000000000000..e6caa3321566
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-tuner.rst
@@ -0,0 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Tuner functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/tuner.h
+
+.. kernel-doc:: include/media/tuner-types.h
diff --git a/Documentation/driver-api/media/v4l2-tveeprom.rst b/Documentation/driver-api/media/v4l2-tveeprom.rst
new file mode 100644
index 000000000000..43fb391edaba
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-tveeprom.rst
@@ -0,0 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Hauppauge TV EEPROM functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/tveeprom.h
diff --git a/Documentation/driver-api/media/v4l2-videobuf.rst b/Documentation/driver-api/media/v4l2-videobuf.rst
new file mode 100644
index 000000000000..4b1d84eefeb8
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-videobuf.rst
@@ -0,0 +1,403 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _vb_framework:
+
+Videobuf Framework
+==================
+
+Author: Jonathan Corbet <corbet@lwn.net>
+
+Current as of 2.6.33
+
+.. note::
+
+   The videobuf framework was deprecated in favor of videobuf2. Shouldn't
+   be used on new drivers.
+
+Introduction
+------------
+
+The videobuf layer functions as a sort of glue layer between a V4L2 driver
+and user space.  It handles the allocation and management of buffers for
+the storage of video frames.  There is a set of functions which can be used
+to implement many of the standard POSIX I/O system calls, including read(),
+poll(), and, happily, mmap().  Another set of functions can be used to
+implement the bulk of the V4L2 ioctl() calls related to streaming I/O,
+including buffer allocation, queueing and dequeueing, and streaming
+control.  Using videobuf imposes a few design decisions on the driver
+author, but the payback comes in the form of reduced code in the driver and
+a consistent implementation of the V4L2 user-space API.
+
+Buffer types
+------------
+
+Not all video devices use the same kind of buffers.  In fact, there are (at
+least) three common variations:
+
+ - Buffers which are scattered in both the physical and (kernel) virtual
+   address spaces.  (Almost) all user-space buffers are like this, but it
+   makes great sense to allocate kernel-space buffers this way as well when
+   it is possible.  Unfortunately, it is not always possible; working with
+   this kind of buffer normally requires hardware which can do
+   scatter/gather DMA operations.
+
+ - Buffers which are physically scattered, but which are virtually
+   contiguous; buffers allocated with vmalloc(), in other words.  These
+   buffers are just as hard to use for DMA operations, but they can be
+   useful in situations where DMA is not available but virtually-contiguous
+   buffers are convenient.
+
+ - Buffers which are physically contiguous.  Allocation of this kind of
+   buffer can be unreliable on fragmented systems, but simpler DMA
+   controllers cannot deal with anything else.
+
+Videobuf can work with all three types of buffers, but the driver author
+must pick one at the outset and design the driver around that decision.
+
+[It's worth noting that there's a fourth kind of buffer: "overlay" buffers
+which are located within the system's video memory.  The overlay
+functionality is considered to be deprecated for most use, but it still
+shows up occasionally in system-on-chip drivers where the performance
+benefits merit the use of this technique.  Overlay buffers can be handled
+as a form of scattered buffer, but there are very few implementations in
+the kernel and a description of this technique is currently beyond the
+scope of this document.]
+
+Data structures, callbacks, and initialization
+----------------------------------------------
+
+Depending on which type of buffers are being used, the driver should
+include one of the following files:
+
+.. code-block:: none
+
+    <media/videobuf-dma-sg.h>		/* Physically scattered */
+    <media/videobuf-vmalloc.h>		/* vmalloc() buffers	*/
+    <media/videobuf-dma-contig.h>	/* Physically contiguous */
+
+The driver's data structure describing a V4L2 device should include a
+struct videobuf_queue instance for the management of the buffer queue,
+along with a list_head for the queue of available buffers.  There will also
+need to be an interrupt-safe spinlock which is used to protect (at least)
+the queue.
+
+The next step is to write four simple callbacks to help videobuf deal with
+the management of buffers:
+
+.. code-block:: none
+
+    struct videobuf_queue_ops {
+	int (*buf_setup)(struct videobuf_queue *q,
+			 unsigned int *count, unsigned int *size);
+	int (*buf_prepare)(struct videobuf_queue *q,
+			   struct videobuf_buffer *vb,
+			   enum v4l2_field field);
+	void (*buf_queue)(struct videobuf_queue *q,
+			  struct videobuf_buffer *vb);
+	void (*buf_release)(struct videobuf_queue *q,
+			    struct videobuf_buffer *vb);
+    };
+
+buf_setup() is called early in the I/O process, when streaming is being
+initiated; its purpose is to tell videobuf about the I/O stream.  The count
+parameter will be a suggested number of buffers to use; the driver should
+check it for rationality and adjust it if need be.  As a practical rule, a
+minimum of two buffers are needed for proper streaming, and there is
+usually a maximum (which cannot exceed 32) which makes sense for each
+device.  The size parameter should be set to the expected (maximum) size
+for each frame of data.
+
+Each buffer (in the form of a struct videobuf_buffer pointer) will be
+passed to buf_prepare(), which should set the buffer's size, width, height,
+and field fields properly.  If the buffer's state field is
+VIDEOBUF_NEEDS_INIT, the driver should pass it to:
+
+.. code-block:: none
+
+    int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
+			struct v4l2_framebuffer *fbuf);
+
+Among other things, this call will usually allocate memory for the buffer.
+Finally, the buf_prepare() function should set the buffer's state to
+VIDEOBUF_PREPARED.
+
+When a buffer is queued for I/O, it is passed to buf_queue(), which should
+put it onto the driver's list of available buffers and set its state to
+VIDEOBUF_QUEUED.  Note that this function is called with the queue spinlock
+held; if it tries to acquire it as well things will come to a screeching
+halt.  Yes, this is the voice of experience.  Note also that videobuf may
+wait on the first buffer in the queue; placing other buffers in front of it
+could again gum up the works.  So use list_add_tail() to enqueue buffers.
+
+Finally, buf_release() is called when a buffer is no longer intended to be
+used.  The driver should ensure that there is no I/O active on the buffer,
+then pass it to the appropriate free routine(s):
+
+.. code-block:: none
+
+    /* Scatter/gather drivers */
+    int videobuf_dma_unmap(struct videobuf_queue *q,
+			   struct videobuf_dmabuf *dma);
+    int videobuf_dma_free(struct videobuf_dmabuf *dma);
+
+    /* vmalloc drivers */
+    void videobuf_vmalloc_free (struct videobuf_buffer *buf);
+
+    /* Contiguous drivers */
+    void videobuf_dma_contig_free(struct videobuf_queue *q,
+				  struct videobuf_buffer *buf);
+
+One way to ensure that a buffer is no longer under I/O is to pass it to:
+
+.. code-block:: none
+
+    int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
+
+Here, vb is the buffer, non_blocking indicates whether non-blocking I/O
+should be used (it should be zero in the buf_release() case), and intr
+controls whether an interruptible wait is used.
+
+File operations
+---------------
+
+At this point, much of the work is done; much of the rest is slipping
+videobuf calls into the implementation of the other driver callbacks.  The
+first step is in the open() function, which must initialize the
+videobuf queue.  The function to use depends on the type of buffer used:
+
+.. code-block:: none
+
+    void videobuf_queue_sg_init(struct videobuf_queue *q,
+				struct videobuf_queue_ops *ops,
+				struct device *dev,
+				spinlock_t *irqlock,
+				enum v4l2_buf_type type,
+				enum v4l2_field field,
+				unsigned int msize,
+				void *priv);
+
+    void videobuf_queue_vmalloc_init(struct videobuf_queue *q,
+				struct videobuf_queue_ops *ops,
+				struct device *dev,
+				spinlock_t *irqlock,
+				enum v4l2_buf_type type,
+				enum v4l2_field field,
+				unsigned int msize,
+				void *priv);
+
+    void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
+				       struct videobuf_queue_ops *ops,
+				       struct device *dev,
+				       spinlock_t *irqlock,
+				       enum v4l2_buf_type type,
+				       enum v4l2_field field,
+				       unsigned int msize,
+				       void *priv);
+
+In each case, the parameters are the same: q is the queue structure for the
+device, ops is the set of callbacks as described above, dev is the device
+structure for this video device, irqlock is an interrupt-safe spinlock to
+protect access to the data structures, type is the buffer type used by the
+device (cameras will use V4L2_BUF_TYPE_VIDEO_CAPTURE, for example), field
+describes which field is being captured (often V4L2_FIELD_NONE for
+progressive devices), msize is the size of any containing structure used
+around struct videobuf_buffer, and priv is a private data pointer which
+shows up in the priv_data field of struct videobuf_queue.  Note that these
+are void functions which, evidently, are immune to failure.
+
+V4L2 capture drivers can be written to support either of two APIs: the
+read() system call and the rather more complicated streaming mechanism.  As
+a general rule, it is necessary to support both to ensure that all
+applications have a chance of working with the device.  Videobuf makes it
+easy to do that with the same code.  To implement read(), the driver need
+only make a call to one of:
+
+.. code-block:: none
+
+    ssize_t videobuf_read_one(struct videobuf_queue *q,
+			      char __user *data, size_t count,
+			      loff_t *ppos, int nonblocking);
+
+    ssize_t videobuf_read_stream(struct videobuf_queue *q,
+				 char __user *data, size_t count,
+				 loff_t *ppos, int vbihack, int nonblocking);
+
+Either one of these functions will read frame data into data, returning the
+amount actually read; the difference is that videobuf_read_one() will only
+read a single frame, while videobuf_read_stream() will read multiple frames
+if they are needed to satisfy the count requested by the application.  A
+typical driver read() implementation will start the capture engine, call
+one of the above functions, then stop the engine before returning (though a
+smarter implementation might leave the engine running for a little while in
+anticipation of another read() call happening in the near future).
+
+The poll() function can usually be implemented with a direct call to:
+
+.. code-block:: none
+
+    unsigned int videobuf_poll_stream(struct file *file,
+				      struct videobuf_queue *q,
+				      poll_table *wait);
+
+Note that the actual wait queue eventually used will be the one associated
+with the first available buffer.
+
+When streaming I/O is done to kernel-space buffers, the driver must support
+the mmap() system call to enable user space to access the data.  In many
+V4L2 drivers, the often-complex mmap() implementation simplifies to a
+single call to:
+
+.. code-block:: none
+
+    int videobuf_mmap_mapper(struct videobuf_queue *q,
+			     struct vm_area_struct *vma);
+
+Everything else is handled by the videobuf code.
+
+The release() function requires two separate videobuf calls:
+
+.. code-block:: none
+
+    void videobuf_stop(struct videobuf_queue *q);
+    int videobuf_mmap_free(struct videobuf_queue *q);
+
+The call to videobuf_stop() terminates any I/O in progress - though it is
+still up to the driver to stop the capture engine.  The call to
+videobuf_mmap_free() will ensure that all buffers have been unmapped; if
+so, they will all be passed to the buf_release() callback.  If buffers
+remain mapped, videobuf_mmap_free() returns an error code instead.  The
+purpose is clearly to cause the closing of the file descriptor to fail if
+buffers are still mapped, but every driver in the 2.6.32 kernel cheerfully
+ignores its return value.
+
+ioctl() operations
+------------------
+
+The V4L2 API includes a very long list of driver callbacks to respond to
+the many ioctl() commands made available to user space.  A number of these
+- those associated with streaming I/O - turn almost directly into videobuf
+calls.  The relevant helper functions are:
+
+.. code-block:: none
+
+    int videobuf_reqbufs(struct videobuf_queue *q,
+			 struct v4l2_requestbuffers *req);
+    int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+    int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+    int videobuf_dqbuf(struct videobuf_queue *q, struct v4l2_buffer *b,
+		       int nonblocking);
+    int videobuf_streamon(struct videobuf_queue *q);
+    int videobuf_streamoff(struct videobuf_queue *q);
+
+So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's
+vidioc_reqbufs() callback which, in turn, usually only needs to locate the
+proper struct videobuf_queue pointer and pass it to videobuf_reqbufs().
+These support functions can replace a great deal of buffer management
+boilerplate in a lot of V4L2 drivers.
+
+The vidioc_streamon() and vidioc_streamoff() functions will be a bit more
+complex, of course, since they will also need to deal with starting and
+stopping the capture engine.
+
+Buffer allocation
+-----------------
+
+Thus far, we have talked about buffers, but have not looked at how they are
+allocated.  The scatter/gather case is the most complex on this front.  For
+allocation, the driver can leave buffer allocation entirely up to the
+videobuf layer; in this case, buffers will be allocated as anonymous
+user-space pages and will be very scattered indeed.  If the application is
+using user-space buffers, no allocation is needed; the videobuf layer will
+take care of calling get_user_pages() and filling in the scatterlist array.
+
+If the driver needs to do its own memory allocation, it should be done in
+the vidioc_reqbufs() function, *after* calling videobuf_reqbufs().  The
+first step is a call to:
+
+.. code-block:: none
+
+    struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);
+
+The returned videobuf_dmabuf structure (defined in
+<media/videobuf-dma-sg.h>) includes a couple of relevant fields:
+
+.. code-block:: none
+
+    struct scatterlist  *sglist;
+    int                 sglen;
+
+The driver must allocate an appropriately-sized scatterlist array and
+populate it with pointers to the pieces of the allocated buffer; sglen
+should be set to the length of the array.
+
+Drivers using the vmalloc() method need not (and cannot) concern themselves
+with buffer allocation at all; videobuf will handle those details.  The
+same is normally true of contiguous-DMA drivers as well; videobuf will
+allocate the buffers (with dma_alloc_coherent()) when it sees fit.  That
+means that these drivers may be trying to do high-order allocations at any
+time, an operation which is not always guaranteed to work.  Some drivers
+play tricks by allocating DMA space at system boot time; videobuf does not
+currently play well with those drivers.
+
+As of 2.6.31, contiguous-DMA drivers can work with a user-supplied buffer,
+as long as that buffer is physically contiguous.  Normal user-space
+allocations will not meet that criterion, but buffers obtained from other
+kernel drivers, or those contained within huge pages, will work with these
+drivers.
+
+Filling the buffers
+-------------------
+
+The final part of a videobuf implementation has no direct callback - it's
+the portion of the code which actually puts frame data into the buffers,
+usually in response to interrupts from the device.  For all types of
+drivers, this process works approximately as follows:
+
+ - Obtain the next available buffer and make sure that somebody is actually
+   waiting for it.
+
+ - Get a pointer to the memory and put video data there.
+
+ - Mark the buffer as done and wake up the process waiting for it.
+
+Step (1) above is done by looking at the driver-managed list_head structure
+- the one which is filled in the buf_queue() callback.  Because starting
+the engine and enqueueing buffers are done in separate steps, it's possible
+for the engine to be running without any buffers available - in the
+vmalloc() case especially.  So the driver should be prepared for the list
+to be empty.  It is equally possible that nobody is yet interested in the
+buffer; the driver should not remove it from the list or fill it until a
+process is waiting on it.  That test can be done by examining the buffer's
+done field (a wait_queue_head_t structure) with waitqueue_active().
+
+A buffer's state should be set to VIDEOBUF_ACTIVE before being mapped for
+DMA; that ensures that the videobuf layer will not try to do anything with
+it while the device is transferring data.
+
+For scatter/gather drivers, the needed memory pointers will be found in the
+scatterlist structure described above.  Drivers using the vmalloc() method
+can get a memory pointer with:
+
+.. code-block:: none
+
+    void *videobuf_to_vmalloc(struct videobuf_buffer *buf);
+
+For contiguous DMA drivers, the function to use is:
+
+.. code-block:: none
+
+    dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);
+
+The contiguous DMA API goes out of its way to hide the kernel-space address
+of the DMA buffer from drivers.
+
+The final step is to set the size field of the relevant videobuf_buffer
+structure to the actual size of the captured image, set state to
+VIDEOBUF_DONE, then call wake_up() on the done queue.  At this point, the
+buffer is owned by the videobuf layer and the driver should not touch it
+again.
+
+Developers who are interested in more information can go into the relevant
+header files; there are a few low-level functions declared there which have
+not been talked about here.  Note also that all of these calls are exported
+GPL-only, so they will not be available to non-GPL kernel modules.
diff --git a/Documentation/driver-api/media/v4l2-videobuf2.rst b/Documentation/driver-api/media/v4l2-videobuf2.rst
new file mode 100644
index 000000000000..1044f64ff168
--- /dev/null
+++ b/Documentation/driver-api/media/v4l2-videobuf2.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _vb2_framework:
+
+V4L2 videobuf2 functions and data structures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. kernel-doc:: include/media/videobuf2-core.h
+
+.. kernel-doc:: include/media/videobuf2-v4l2.h
+
+.. kernel-doc:: include/media/videobuf2-memops.h
diff --git a/Documentation/driver-api/nvdimm/nvdimm.rst b/Documentation/driver-api/nvdimm/nvdimm.rst
index 08f855cbb4e6..79c0fd39f2af 100644
--- a/Documentation/driver-api/nvdimm/nvdimm.rst
+++ b/Documentation/driver-api/nvdimm/nvdimm.rst
@@ -278,8 +278,8 @@ by a region device with a dynamically assigned id (REGION0 - REGION5).
        be contiguous in DPA-space.
 
     This bus is provided by the kernel under the device
-    /sys/devices/platform/nfit_test.0 when CONFIG_NFIT_TEST is enabled and
-    the nfit_test.ko module is loaded.  This not only test LIBNVDIMM but the
+    /sys/devices/platform/nfit_test.0 when the nfit_test.ko module from
+    tools/testing/nvdimm is loaded.  This not only test LIBNVDIMM but the
     acpi_nfit.ko driver as well.
 
 
diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst
index f66c7b9126ea..946ad0b94e31 100644
--- a/Documentation/driver-api/pm/devices.rst
+++ b/Documentation/driver-api/pm/devices.rst
@@ -349,7 +349,7 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
 	PM core will skip the ``suspend``, ``suspend_late`` and
 	``suspend_noirq`` phases as well as all of the corresponding phases of
 	the subsequent device resume for all of these devices.	In that case,
-	the ``->complete`` callback will be invoked directly after the
+	the ``->complete`` callback will be the next one invoked after the
 	``->prepare`` callback and is entirely responsible for putting the
 	device into a consistent state as appropriate.
 
@@ -361,9 +361,9 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
 	runtime PM disabled.
 
 	This feature also can be controlled by device drivers by using the
-	``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power
-	management flags.  [Typically, they are set at the time the driver is
-	probed against the device in question by passing them to the
+	``DPM_FLAG_NO_DIRECT_COMPLETE`` and ``DPM_FLAG_SMART_PREPARE`` driver
+	power management flags.  [Typically, they are set at the time the driver
+	is probed against the device in question by passing them to the
 	:c:func:`dev_pm_set_driver_flags` helper function.]  If the first of
 	these flags is set, the PM core will not apply the direct-complete
 	procedure described above to the given device and, consequenty, to any
@@ -383,11 +383,15 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
 	``->suspend`` methods provided by subsystems (bus types and PM domains
 	in particular) must follow an additional rule regarding what can be done
 	to the devices before their drivers' ``->suspend`` methods are called.
-	Namely, they can only resume the devices from runtime suspend by
-	calling :c:func:`pm_runtime_resume` for them, if that is necessary, and
+	Namely, they may resume the devices from runtime suspend by
+	calling :c:func:`pm_runtime_resume` for them, if that is necessary, but
 	they must not update the state of the devices in any other way at that
 	time (in case the drivers need to resume the devices from runtime
-	suspend in their ``->suspend`` methods).
+	suspend in their ``->suspend`` methods).  In fact, the PM core prevents
+	subsystems or drivers from putting devices into runtime suspend at
+	these times by calling :c:func:`pm_runtime_get_noresume` before issuing
+	the ``->prepare`` callback (and calling :c:func:`pm_runtime_put` after
+	issuing the ``->complete`` callback).
 
     3.	For a number of devices it is convenient to split suspend into the
 	"quiesce device" and "save device state" phases, in which cases
@@ -459,22 +463,22 @@ When resuming from freeze, standby or memory sleep, the phases are:
 
 	Note, however, that new children may be registered below the device as
 	soon as the ``->resume`` callbacks occur; it's not necessary to wait
-	until the ``complete`` phase with that.
+	until the ``complete`` phase runs.
 
 	Moreover, if the preceding ``->prepare`` callback returned a positive
 	number, the device may have been left in runtime suspend throughout the
-	whole system suspend and resume (the ``suspend``, ``suspend_late``,
-	``suspend_noirq`` phases of system suspend and the ``resume_noirq``,
-	``resume_early``, ``resume`` phases of system resume may have been
-	skipped for it).  In that case, the ``->complete`` callback is entirely
+	whole system suspend and resume (its ``->suspend``, ``->suspend_late``,
+	``->suspend_noirq``, ``->resume_noirq``,
+	``->resume_early``, and ``->resume`` callbacks may have been
+	skipped).  In that case, the ``->complete`` callback is entirely
 	responsible for putting the device into a consistent state after system
 	suspend if necessary.  [For example, it may need to queue up a runtime
 	resume request for the device for this purpose.]  To check if that is
 	the case, the ``->complete`` callback can consult the device's
-	``power.direct_complete`` flag.  Namely, if that flag is set when the
-	``->complete`` callback is being run, it has been called directly after
-	the preceding ``->prepare`` and special actions may be required
-	to make the device work correctly afterward.
+	``power.direct_complete`` flag.  If that flag is set when the
+	``->complete`` callback is being run then the direct-complete mechanism
+	was used, and special actions may be required to make the device work
+	correctly afterward.
 
 At the end of these phases, drivers should be as functional as they were before
 suspending: I/O can be performed using DMA and IRQs, and the relevant clocks are
@@ -575,10 +579,12 @@ and the phases are similar.
 
 The ``->poweroff``, ``->poweroff_late`` and ``->poweroff_noirq`` callbacks
 should do essentially the same things as the ``->suspend``, ``->suspend_late``
-and ``->suspend_noirq`` callbacks, respectively.  The only notable difference is
+and ``->suspend_noirq`` callbacks, respectively.  A notable difference is
 that they need not store the device register values, because the registers
 should already have been stored during the ``freeze``, ``freeze_late`` or
-``freeze_noirq`` phases.
+``freeze_noirq`` phases.  Also, on many machines the firmware will power-down
+the entire system, so it is not necessary for the callback to put the device in
+a low-power state.
 
 
 Leaving Hibernation
@@ -764,70 +770,119 @@ device driver in question.
 
 If it is necessary to resume a device from runtime suspend during a system-wide
 transition into a sleep state, that can be done by calling
-:c:func:`pm_runtime_resume` for it from the ``->suspend`` callback (or its
-couterpart for transitions related to hibernation) of either the device's driver
-or a subsystem responsible for it (for example, a bus type or a PM domain).
-That is guaranteed to work by the requirement that subsystems must not change
-the state of devices (possibly except for resuming them from runtime suspend)
+:c:func:`pm_runtime_resume` from the ``->suspend`` callback (or the ``->freeze``
+or ``->poweroff`` callback for transitions related to hibernation) of either the
+device's driver or its subsystem (for example, a bus type or a PM domain).
+However, subsystems must not otherwise change the runtime status of devices
 from their ``->prepare`` and ``->suspend`` callbacks (or equivalent) *before*
 invoking device drivers' ``->suspend`` callbacks (or equivalent).
 
+.. _smart_suspend_flag:
+
+The ``DPM_FLAG_SMART_SUSPEND`` Driver Flag
+------------------------------------------
+
 Some bus types and PM domains have a policy to resume all devices from runtime
 suspend upfront in their ``->suspend`` callbacks, but that may not be really
-necessary if the driver of the device can cope with runtime-suspended devices.
-The driver can indicate that by setting ``DPM_FLAG_SMART_SUSPEND`` in
-:c:member:`power.driver_flags` at the probe time, by passing it to the
-:c:func:`dev_pm_set_driver_flags` helper.  That also may cause middle-layer code
+necessary if the device's driver can cope with runtime-suspended devices.
+The driver can indicate this by setting ``DPM_FLAG_SMART_SUSPEND`` in
+:c:member:`power.driver_flags` at probe time, with the assistance of the
+:c:func:`dev_pm_set_driver_flags` helper routine.
+
+Setting that flag causes the PM core and middle-layer code
 (bus types, PM domains etc.) to skip the ``->suspend_late`` and
 ``->suspend_noirq`` callbacks provided by the driver if the device remains in
-runtime suspend at the beginning of the ``suspend_late`` phase of system-wide
-suspend (or in the ``poweroff_late`` phase of hibernation), when runtime PM
-has been disabled for it, under the assumption that its state should not change
-after that point until the system-wide transition is over (the PM core itself
-does that for devices whose "noirq", "late" and "early" system-wide PM callbacks
-are executed directly by it).  If that happens, the driver's system-wide resume
-callbacks, if present, may still be invoked during the subsequent system-wide
-resume transition and the device's runtime power management status may be set
-to "active" before enabling runtime PM for it, so the driver must be prepared to
-cope with the invocation of its system-wide resume callbacks back-to-back with
-its ``->runtime_suspend`` one (without the intervening ``->runtime_resume`` and
-so on) and the final state of the device must reflect the "active" runtime PM
-status in that case.
+runtime suspend throughout those phases of the system-wide suspend (and
+similarly for the "freeze" and "poweroff" parts of system hibernation).
+[Otherwise the same driver
+callback might be executed twice in a row for the same device, which would not
+be valid in general.]  If the middle-layer system-wide PM callbacks are present
+for the device then they are responsible for skipping these driver callbacks;
+if not then the PM core skips them.  The subsystem callback routines can
+determine whether they need to skip the driver callbacks by testing the return
+value from the :c:func:`dev_pm_skip_suspend` helper function.
+
+In addition, with ``DPM_FLAG_SMART_SUSPEND`` set, the driver's ``->thaw_noirq``
+and ``->thaw_early`` callbacks are skipped in hibernation if the device remained
+in runtime suspend throughout the preceding "freeze" transition.  Again, if the
+middle-layer callbacks are present for the device, they are responsible for
+doing this, otherwise the PM core takes care of it.
+
+
+The ``DPM_FLAG_MAY_SKIP_RESUME`` Driver Flag
+--------------------------------------------
 
 During system-wide resume from a sleep state it's easiest to put devices into
 the full-power state, as explained in :file:`Documentation/power/runtime_pm.rst`.
 [Refer to that document for more information regarding this particular issue as
 well as for information on the device runtime power management framework in
-general.]
-
-However, it often is desirable to leave devices in suspend after system
-transitions to the working state, especially if those devices had been in
+general.]  However, it often is desirable to leave devices in suspend after
+system transitions to the working state, especially if those devices had been in
 runtime suspend before the preceding system-wide suspend (or analogous)
-transition.  Device drivers can use the ``DPM_FLAG_LEAVE_SUSPENDED`` flag to
-indicate to the PM core (and middle-layer code) that they prefer the specific
-devices handled by them to be left suspended and they have no problems with
-skipping their system-wide resume callbacks for this reason.  Whether or not the
-devices will actually be left in suspend may depend on their state before the
-given system suspend-resume cycle and on the type of the system transition under
-way.  In particular, devices are not left suspended if that transition is a
-restore from hibernation, as device states are not guaranteed to be reflected
-by the information stored in the hibernation image in that case.
-
-The middle-layer code involved in the handling of the device is expected to
-indicate to the PM core if the device may be left in suspend by setting its
-:c:member:`power.may_skip_resume` status bit which is checked by the PM core
-during the "noirq" phase of the preceding system-wide suspend (or analogous)
-transition.  The middle layer is then responsible for handling the device as
-appropriate in its "noirq" resume callback, which is executed regardless of
-whether or not the device is left suspended, but the other resume callbacks
-(except for ``->complete``) will be skipped automatically by the PM core if the
-device really can be left in suspend.
-
-For devices whose "noirq", "late" and "early" driver callbacks are invoked
-directly by the PM core, all of the system-wide resume callbacks are skipped if
-``DPM_FLAG_LEAVE_SUSPENDED`` is set and the device is in runtime suspend during
-the ``suspend_noirq`` (or analogous) phase or the transition under way is a
-proper system suspend (rather than anything related to hibernation) and the
-device's wakeup settings are suitable for runtime PM (that is, it cannot
-generate wakeup signals at all or it is allowed to wake up the system from
-sleep).
+transition.
+
+To that end, device drivers can use the ``DPM_FLAG_MAY_SKIP_RESUME`` flag to
+indicate to the PM core and middle-layer code that they allow their "noirq" and
+"early" resume callbacks to be skipped if the device can be left in suspend
+after system-wide PM transitions to the working state.  Whether or not that is
+the case generally depends on the state of the device before the given system
+suspend-resume cycle and on the type of the system transition under way.
+In particular, the "thaw" and "restore" transitions related to hibernation are
+not affected by ``DPM_FLAG_MAY_SKIP_RESUME`` at all.  [All callbacks are
+issued during the "restore" transition regardless of the flag settings,
+and whether or not any driver callbacks
+are skipped during the "thaw" transition depends whether or not the
+``DPM_FLAG_SMART_SUSPEND`` flag is set (see `above <smart_suspend_flag_>`_).
+In addition, a device is not allowed to remain in runtime suspend if any of its
+children will be returned to full power.]
+
+The ``DPM_FLAG_MAY_SKIP_RESUME`` flag is taken into account in combination with
+the :c:member:`power.may_skip_resume` status bit set by the PM core during the
+"suspend" phase of suspend-type transitions.  If the driver or the middle layer
+has a reason to prevent the driver's "noirq" and "early" resume callbacks from
+being skipped during the subsequent system resume transition, it should
+clear :c:member:`power.may_skip_resume` in its ``->suspend``, ``->suspend_late``
+or ``->suspend_noirq`` callback.  [Note that the drivers setting
+``DPM_FLAG_SMART_SUSPEND`` need to clear :c:member:`power.may_skip_resume` in
+their ``->suspend`` callback in case the other two are skipped.]
+
+Setting the :c:member:`power.may_skip_resume` status bit along with the
+``DPM_FLAG_MAY_SKIP_RESUME`` flag is necessary, but generally not sufficient,
+for the driver's "noirq" and "early" resume callbacks to be skipped.  Whether or
+not they should be skipped can be determined by evaluating the
+:c:func:`dev_pm_skip_resume` helper function.
+
+If that function returns ``true``, the driver's "noirq" and "early" resume
+callbacks should be skipped and the device's runtime PM status will be set to
+"suspended" by the PM core.  Otherwise, if the device was runtime-suspended
+during the preceding system-wide suspend transition and its
+``DPM_FLAG_SMART_SUSPEND`` is set, its runtime PM status will be set to
+"active" by the PM core.  [Hence, the drivers that do not set
+``DPM_FLAG_SMART_SUSPEND`` should not expect the runtime PM status of their
+devices to be changed from "suspended" to "active" by the PM core during
+system-wide resume-type transitions.]
+
+If the ``DPM_FLAG_MAY_SKIP_RESUME`` flag is not set for a device, but
+``DPM_FLAG_SMART_SUSPEND`` is set and the driver's "late" and "noirq" suspend
+callbacks are skipped, its system-wide "noirq" and "early" resume callbacks, if
+present, are invoked as usual and the device's runtime PM status is set to
+"active" by the PM core before enabling runtime PM for it.  In that case, the
+driver must be prepared to cope with the invocation of its system-wide resume
+callbacks back-to-back with its ``->runtime_suspend`` one (without the
+intervening ``->runtime_resume`` and system-wide suspend callbacks) and the
+final state of the device must reflect the "active" runtime PM status in that
+case.  [Note that this is not a problem at all if the driver's
+``->suspend_late`` callback pointer points to the same function as its
+``->runtime_suspend`` one and its ``->resume_early`` callback pointer points to
+the same function as the ``->runtime_resume`` one, while none of the other
+system-wide suspend-resume callbacks of the driver are present, for example.]
+
+Likewise, if ``DPM_FLAG_MAY_SKIP_RESUME`` is set for a device, its driver's
+system-wide "noirq" and "early" resume callbacks may be skipped while its "late"
+and "noirq" suspend callbacks may have been executed (in principle, regardless
+of whether or not ``DPM_FLAG_SMART_SUSPEND`` is set).  In that case, the driver
+needs to be able to cope with the invocation of its ``->runtime_resume``
+callback back-to-back with its "late" and "noirq" suspend ones.  [For instance,
+that is not a concern if the driver sets both ``DPM_FLAG_SMART_SUSPEND`` and
+``DPM_FLAG_MAY_SKIP_RESUME`` and uses the same pair of suspend/resume callback
+functions for runtime PM and system-wide suspend/resume.]
diff --git a/Documentation/fb/api.rst b/Documentation/fb/api.rst
index 79ec33dded74..4f00e7196fef 100644
--- a/Documentation/fb/api.rst
+++ b/Documentation/fb/api.rst
@@ -290,12 +290,12 @@ the FB_CAP_FOURCC bit in the fb_fix_screeninfo capabilities field.
 FOURCC definitions are located in the linux/videodev2.h header. However, and
 despite starting with the V4L2_PIX_FMT_prefix, they are not restricted to V4L2
 and don't require usage of the V4L2 subsystem. FOURCC documentation is
-available in Documentation/media/uapi/v4l/pixfmt.rst.
+available in Documentation/userspace-api/media/v4l/pixfmt.rst.
 
 To select a format, applications set the grayscale field to the desired FOURCC.
 For YUV formats, they should also select the appropriate colorspace by setting
 the colorspace field to one of the colorspaces listed in linux/videodev2.h and
-documented in Documentation/media/uapi/v4l/colorspaces.rst.
+documented in Documentation/userspace-api/media/v4l/colorspaces.rst.
 
 The red, green, blue and transp fields are not used with the FOURCC-based API.
 For forward compatibility reasons applications must zero those fields, and
diff --git a/Documentation/fb/efifb.rst b/Documentation/fb/efifb.rst
index 04840331a00e..519550517fd4 100644
--- a/Documentation/fb/efifb.rst
+++ b/Documentation/fb/efifb.rst
@@ -2,8 +2,10 @@
 What is efifb?
 ==============
 
-This is a generic EFI platform driver for Intel based Apple computers.
-efifb is only for EFI booted Intel Macs.
+This is a generic EFI platform driver for systems with UEFI firmware. The
+system must be booted via the EFI stub for this to be usable. efifb supports
+both firmware with Graphics Output Protocol (GOP) displays as well as older
+systems with only Universal Graphics Adapter (UGA) displays.
 
 Supported Hardware
 ==================
@@ -12,11 +14,14 @@ Supported Hardware
 - Macbook
 - Macbook Pro 15"/17"
 - MacMini
+- ARM/ARM64/X86 systems with UEFI firmware
 
 How to use it?
 ==============
 
-efifb does not have any kind of autodetection of your machine.
+For UGA displays, efifb does not have any kind of autodetection of your
+machine.
+
 You have to add the following kernel parameters in your elilo.conf::
 
 	Macbook :
@@ -28,6 +33,9 @@ You have to add the following kernel parameters in your elilo.conf::
 	Macbook Pro 17", iMac 20" :
 		video=efifb:i20
 
+For GOP displays, efifb can autodetect the display's resolution and framebuffer
+address, so these should work out of the box without any special parameters.
+
 Accepted options:
 
 ======= ===========================================================
@@ -36,4 +44,23 @@ nowc	Don't map the framebuffer write combined. This can be used
 	when large amounts of console data are written.
 ======= ===========================================================
 
+Options for GOP displays:
+
+mode=n
+        The EFI stub will set the mode of the display to mode number n if
+        possible.
+
+<xres>x<yres>[-(rgb|bgr|<bpp>)]
+        The EFI stub will search for a display mode that matches the specified
+        horizontal and vertical resolution, and optionally bit depth, and set
+        the mode of the display to it if one is found. The bit depth can either
+        "rgb" or "bgr" to match specifically those pixel formats, or a number
+        for a mode with matching bits per pixel.
+
+auto
+        The EFI stub will choose the mode with the highest resolution (product
+        of horizontal and vertical resolution). If there are multiple modes
+        with the highest resolution, it will choose one with the highest color
+        depth.
+
 Edgar Hucek <gimli@dark-green.com>
diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt
new file mode 100644
index 000000000000..c527d05c0459
--- /dev/null
+++ b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt
@@ -0,0 +1,34 @@
+#
+# Feature name:          debug-vm-pgtable
+#         Kconfig:       ARCH_HAS_DEBUG_VM_PGTABLE
+#         description:   arch supports pgtable tests for semantics compliance
+#
+    -----------------------
+    |         arch |status|
+    -----------------------
+    |       alpha: | TODO |
+    |         arc: |  ok  |
+    |         arm: | TODO |
+    |       arm64: |  ok  |
+    |         c6x: | TODO |
+    |        csky: | TODO |
+    |       h8300: | TODO |
+    |     hexagon: | TODO |
+    |        ia64: | TODO |
+    |        m68k: | TODO |
+    |  microblaze: | TODO |
+    |        mips: | TODO |
+    |       nds32: | TODO |
+    |       nios2: | TODO |
+    |    openrisc: | TODO |
+    |      parisc: | TODO |
+    |     powerpc: |  ok  |
+    |       riscv: | TODO |
+    |        s390: |  ok  |
+    |          sh: | TODO |
+    |       sparc: | TODO |
+    |          um: | TODO |
+    |   unicore32: | TODO |
+    |         x86: |  ok  |
+    |      xtensa: | TODO |
+    -----------------------
diff --git a/Documentation/features/vm/numa-memblock/arch-support.txt b/Documentation/features/vm/numa-memblock/arch-support.txt
deleted file mode 100644
index 3004beb0fd71..000000000000
--- a/Documentation/features/vm/numa-memblock/arch-support.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# Feature name:          numa-memblock
-#         Kconfig:       HAVE_MEMBLOCK_NODE_MAP
-#         description:   arch supports NUMA aware memblocks
-#
-    -----------------------
-    |         arch |status|
-    -----------------------
-    |       alpha: | TODO |
-    |         arc: |  ..  |
-    |         arm: |  ..  |
-    |       arm64: |  ok  |
-    |         c6x: |  ..  |
-    |        csky: |  ..  |
-    |       h8300: |  ..  |
-    |     hexagon: |  ..  |
-    |        ia64: |  ok  |
-    |        m68k: |  ..  |
-    |  microblaze: |  ok  |
-    |        mips: |  ok  |
-    |       nds32: | TODO |
-    |       nios2: |  ..  |
-    |    openrisc: |  ..  |
-    |      parisc: |  ..  |
-    |     powerpc: |  ok  |
-    |       riscv: |  ok  |
-    |        s390: |  ok  |
-    |          sh: |  ok  |
-    |       sparc: |  ok  |
-    |          um: |  ..  |
-    |   unicore32: |  ..  |
-    |         x86: |  ok  |
-    |      xtensa: |  ..  |
-    -----------------------
diff --git a/Documentation/filesystems/9p.rst b/Documentation/filesystems/9p.rst
index 671fef39a802..2995279ddc24 100644
--- a/Documentation/filesystems/9p.rst
+++ b/Documentation/filesystems/9p.rst
@@ -192,4 +192,4 @@ For more information on the Plan 9 Operating System check out
 http://plan9.bell-labs.com/plan9
 
 For information on Plan 9 from User Space (Plan 9 applications and libraries
-ported to Linux/BSD/OSX/etc) check out http://swtch.com/plan9
+ported to Linux/BSD/OSX/etc) check out https://9fans.github.io/plan9port/
diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.txt
index 679729442fd2..735f3859b19f 100644
--- a/Documentation/filesystems/dax.txt
+++ b/Documentation/filesystems/dax.txt
@@ -74,7 +74,7 @@ are zeroed out and converted to written extents before being returned to avoid
 exposure of uninitialized data through mmap.
 
 These filesystems may be used for inspiration:
-- ext2: see Documentation/filesystems/ext2.txt
+- ext2: see Documentation/filesystems/ext2.rst
 - ext4: see Documentation/filesystems/ext4/
 - xfs:  see Documentation/admin-guide/xfs.rst
 
diff --git a/Documentation/filesystems/dnotify.txt b/Documentation/filesystems/dnotify.txt
index 15156883d321..08d575ece45d 100644
--- a/Documentation/filesystems/dnotify.txt
+++ b/Documentation/filesystems/dnotify.txt
@@ -67,4 +67,4 @@ See tools/testing/selftests/filesystems/dnotify_test.c for an example.
 NOTE
 ----
 Beginning with Linux 2.6.13, dnotify has been replaced by inotify.
-See Documentation/filesystems/inotify.txt for more information on it.
+See Documentation/filesystems/inotify.rst for more information on it.
diff --git a/Documentation/filesystems/gfs2-glocks.rst b/Documentation/filesystems/gfs2-glocks.rst
new file mode 100644
index 000000000000..d14f230f0b12
--- /dev/null
+++ b/Documentation/filesystems/gfs2-glocks.rst
@@ -0,0 +1,253 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+Glock internal locking rules
+============================
+
+This documents the basic principles of the glock state machine
+internals. Each glock (struct gfs2_glock in fs/gfs2/incore.h)
+has two main (internal) locks:
+
+ 1. A spinlock (gl_lockref.lock) which protects the internal state such
+    as gl_state, gl_target and the list of holders (gl_holders)
+ 2. A non-blocking bit lock, GLF_LOCK, which is used to prevent other
+    threads from making calls to the DLM, etc. at the same time. If a
+    thread takes this lock, it must then call run_queue (usually via the
+    workqueue) when it releases it in order to ensure any pending tasks
+    are completed.
+
+The gl_holders list contains all the queued lock requests (not
+just the holders) associated with the glock. If there are any
+held locks, then they will be contiguous entries at the head
+of the list. Locks are granted in strictly the order that they
+are queued, except for those marked LM_FLAG_PRIORITY which are
+used only during recovery, and even then only for journal locks.
+
+There are three lock states that users of the glock layer can request,
+namely shared (SH), deferred (DF) and exclusive (EX). Those translate
+to the following DLM lock modes:
+
+==========	====== =====================================================
+Glock mode      DLM    lock mode
+==========	====== =====================================================
+    UN          IV/NL  Unlocked (no DLM lock associated with glock) or NL
+    SH          PR     (Protected read)
+    DF          CW     (Concurrent write)
+    EX          EX     (Exclusive)
+==========	====== =====================================================
+
+Thus DF is basically a shared mode which is incompatible with the "normal"
+shared lock mode, SH. In GFS2 the DF mode is used exclusively for direct I/O
+operations. The glocks are basically a lock plus some routines which deal
+with cache management. The following rules apply for the cache:
+
+==========      ==========   ==============   ==========   ==============
+Glock mode      Cache data   Cache Metadata   Dirty Data   Dirty Metadata
+==========      ==========   ==============   ==========   ==============
+    UN             No              No             No            No
+    SH             Yes             Yes            No            No
+    DF             No              Yes            No            No
+    EX             Yes             Yes            Yes           Yes
+==========      ==========   ==============   ==========   ==============
+
+These rules are implemented using the various glock operations which
+are defined for each type of glock. Not all types of glocks use
+all the modes. Only inode glocks use the DF mode for example.
+
+Table of glock operations and per type constants:
+
+=============      =============================================================
+Field              Purpose
+=============      =============================================================
+go_xmote_th        Called before remote state change (e.g. to sync dirty data)
+go_xmote_bh        Called after remote state change (e.g. to refill cache)
+go_inval           Called if remote state change requires invalidating the cache
+go_demote_ok       Returns boolean value of whether its ok to demote a glock
+                   (e.g. checks timeout, and that there is no cached data)
+go_lock            Called for the first local holder of a lock
+go_unlock          Called on the final local unlock of a lock
+go_dump            Called to print content of object for debugfs file, or on
+                   error to dump glock to the log.
+go_type            The type of the glock, ``LM_TYPE_*``
+go_callback	   Called if the DLM sends a callback to drop this lock
+go_flags	   GLOF_ASPACE is set, if the glock has an address space
+                   associated with it
+=============      =============================================================
+
+The minimum hold time for each lock is the time after a remote lock
+grant for which we ignore remote demote requests. This is in order to
+prevent a situation where locks are being bounced around the cluster
+from node to node with none of the nodes making any progress. This
+tends to show up most with shared mmaped files which are being written
+to by multiple nodes. By delaying the demotion in response to a
+remote callback, that gives the userspace program time to make
+some progress before the pages are unmapped.
+
+There is a plan to try and remove the go_lock and go_unlock callbacks
+if possible, in order to try and speed up the fast path though the locking.
+Also, eventually we hope to make the glock "EX" mode locally shared
+such that any local locking will be done with the i_mutex as required
+rather than via the glock.
+
+Locking rules for glock operations:
+
+=============    ======================    =============================
+Operation        GLF_LOCK bit lock held    gl_lockref.lock spinlock held
+=============    ======================    =============================
+go_xmote_th           Yes                       No
+go_xmote_bh           Yes                       No
+go_inval              Yes                       No
+go_demote_ok          Sometimes                 Yes
+go_lock               Yes                       No
+go_unlock             Yes                       No
+go_dump               Sometimes                 Yes
+go_callback           Sometimes (N/A)           Yes
+=============    ======================    =============================
+
+.. Note::
+
+   Operations must not drop either the bit lock or the spinlock
+   if its held on entry. go_dump and do_demote_ok must never block.
+   Note that go_dump will only be called if the glock's state
+   indicates that it is caching uptodate data.
+
+Glock locking order within GFS2:
+
+ 1. i_rwsem (if required)
+ 2. Rename glock (for rename only)
+ 3. Inode glock(s)
+    (Parents before children, inodes at "same level" with same parent in
+    lock number order)
+ 4. Rgrp glock(s) (for (de)allocation operations)
+ 5. Transaction glock (via gfs2_trans_begin) for non-read operations
+ 6. i_rw_mutex (if required)
+ 7. Page lock  (always last, very important!)
+
+There are two glocks per inode. One deals with access to the inode
+itself (locking order as above), and the other, known as the iopen
+glock is used in conjunction with the i_nlink field in the inode to
+determine the lifetime of the inode in question. Locking of inodes
+is on a per-inode basis. Locking of rgrps is on a per rgrp basis.
+In general we prefer to lock local locks prior to cluster locks.
+
+Glock Statistics
+----------------
+
+The stats are divided into two sets: those relating to the
+super block and those relating to an individual glock. The
+super block stats are done on a per cpu basis in order to
+try and reduce the overhead of gathering them. They are also
+further divided by glock type. All timings are in nanoseconds.
+
+In the case of both the super block and glock statistics,
+the same information is gathered in each case. The super
+block timing statistics are used to provide default values for
+the glock timing statistics, so that newly created glocks
+should have, as far as possible, a sensible starting point.
+The per-glock counters are initialised to zero when the
+glock is created. The per-glock statistics are lost when
+the glock is ejected from memory.
+
+The statistics are divided into three pairs of mean and
+variance, plus two counters. The mean/variance pairs are
+smoothed exponential estimates and the algorithm used is
+one which will be very familiar to those used to calculation
+of round trip times in network code. See "TCP/IP Illustrated,
+Volume 1", W. Richard Stevens, sect 21.3, "Round-Trip Time Measurement",
+p. 299 and onwards. Also, Volume 2, Sect. 25.10, p. 838 and onwards.
+Unlike the TCP/IP Illustrated case, the mean and variance are
+not scaled, but are in units of integer nanoseconds.
+
+The three pairs of mean/variance measure the following
+things:
+
+ 1. DLM lock time (non-blocking requests)
+ 2. DLM lock time (blocking requests)
+ 3. Inter-request time (again to the DLM)
+
+A non-blocking request is one which will complete right
+away, whatever the state of the DLM lock in question. That
+currently means any requests when (a) the current state of
+the lock is exclusive, i.e. a lock demotion (b) the requested
+state is either null or unlocked (again, a demotion) or (c) the
+"try lock" flag is set. A blocking request covers all the other
+lock requests.
+
+There are two counters. The first is there primarily to show
+how many lock requests have been made, and thus how much data
+has gone into the mean/variance calculations. The other counter
+is counting queuing of holders at the top layer of the glock
+code. Hopefully that number will be a lot larger than the number
+of dlm lock requests issued.
+
+So why gather these statistics? There are several reasons
+we'd like to get a better idea of these timings:
+
+1. To be able to better set the glock "min hold time"
+2. To spot performance issues more easily
+3. To improve the algorithm for selecting resource groups for
+   allocation (to base it on lock wait time, rather than blindly
+   using a "try lock")
+
+Due to the smoothing action of the updates, a step change in
+some input quantity being sampled will only fully be taken
+into account after 8 samples (or 4 for the variance) and this
+needs to be carefully considered when interpreting the
+results.
+
+Knowing both the time it takes a lock request to complete and
+the average time between lock requests for a glock means we
+can compute the total percentage of the time for which the
+node is able to use a glock vs. time that the rest of the
+cluster has its share. That will be very useful when setting
+the lock min hold time.
+
+Great care has been taken to ensure that we
+measure exactly the quantities that we want, as accurately
+as possible. There are always inaccuracies in any
+measuring system, but I hope this is as accurate as we
+can reasonably make it.
+
+Per sb stats can be found here::
+
+    /sys/kernel/debug/gfs2/<fsname>/sbstats
+
+Per glock stats can be found here::
+
+    /sys/kernel/debug/gfs2/<fsname>/glstats
+
+Assuming that debugfs is mounted on /sys/kernel/debug and also
+that <fsname> is replaced with the name of the gfs2 filesystem
+in question.
+
+The abbreviations used in the output as are follows:
+
+=========  ================================================================
+srtt       Smoothed round trip time for non blocking dlm requests
+srttvar    Variance estimate for srtt
+srttb      Smoothed round trip time for (potentially) blocking dlm requests
+srttvarb   Variance estimate for srttb
+sirt       Smoothed inter request time (for dlm requests)
+sirtvar    Variance estimate for sirt
+dlm        Number of dlm requests made (dcnt in glstats file)
+queue      Number of glock requests queued (qcnt in glstats file)
+=========  ================================================================
+
+The sbstats file contains a set of these stats for each glock type (so 8 lines
+for each type) and for each cpu (one column per cpu). The glstats file contains
+a set of these stats for each glock in a similar format to the glocks file, but
+using the format mean/variance for each of the timing stats.
+
+The gfs2_glock_lock_time tracepoint prints out the current values of the stats
+for the glock in question, along with some addition information on each dlm
+reply that is received:
+
+======   =======================================
+status   The status of the dlm request
+flags    The dlm request flags
+tdiff    The time taken by this specific request
+======   =======================================
+
+(remaining fields as per above list)
+
+
diff --git a/Documentation/filesystems/gfs2-glocks.txt b/Documentation/filesystems/gfs2-glocks.txt
deleted file mode 100644
index 7059623635b2..000000000000
--- a/Documentation/filesystems/gfs2-glocks.txt
+++ /dev/null
@@ -1,232 +0,0 @@
-                   Glock internal locking rules
-                  ------------------------------
-
-This documents the basic principles of the glock state machine
-internals. Each glock (struct gfs2_glock in fs/gfs2/incore.h)
-has two main (internal) locks:
-
- 1. A spinlock (gl_lockref.lock) which protects the internal state such
-    as gl_state, gl_target and the list of holders (gl_holders)
- 2. A non-blocking bit lock, GLF_LOCK, which is used to prevent other
-    threads from making calls to the DLM, etc. at the same time. If a
-    thread takes this lock, it must then call run_queue (usually via the
-    workqueue) when it releases it in order to ensure any pending tasks
-    are completed.
-
-The gl_holders list contains all the queued lock requests (not
-just the holders) associated with the glock. If there are any
-held locks, then they will be contiguous entries at the head
-of the list. Locks are granted in strictly the order that they
-are queued, except for those marked LM_FLAG_PRIORITY which are
-used only during recovery, and even then only for journal locks.
-
-There are three lock states that users of the glock layer can request,
-namely shared (SH), deferred (DF) and exclusive (EX). Those translate
-to the following DLM lock modes:
-
-Glock mode    | DLM lock mode
-------------------------------
-    UN        |    IV/NL  Unlocked (no DLM lock associated with glock) or NL
-    SH        |    PR     (Protected read)
-    DF        |    CW     (Concurrent write)
-    EX        |    EX     (Exclusive)
-
-Thus DF is basically a shared mode which is incompatible with the "normal"
-shared lock mode, SH. In GFS2 the DF mode is used exclusively for direct I/O
-operations. The glocks are basically a lock plus some routines which deal
-with cache management. The following rules apply for the cache:
-
-Glock mode   |  Cache data | Cache Metadata | Dirty Data | Dirty Metadata
---------------------------------------------------------------------------
-    UN       |     No      |       No       |     No     |      No
-    SH       |     Yes     |       Yes      |     No     |      No
-    DF       |     No      |       Yes      |     No     |      No
-    EX       |     Yes     |       Yes      |     Yes    |      Yes
-
-These rules are implemented using the various glock operations which
-are defined for each type of glock. Not all types of glocks use
-all the modes. Only inode glocks use the DF mode for example.
-
-Table of glock operations and per type constants:
-
-Field            | Purpose
-----------------------------------------------------------------------------
-go_xmote_th      | Called before remote state change (e.g. to sync dirty data)
-go_xmote_bh      | Called after remote state change (e.g. to refill cache)
-go_inval         | Called if remote state change requires invalidating the cache
-go_demote_ok     | Returns boolean value of whether its ok to demote a glock
-                 | (e.g. checks timeout, and that there is no cached data)
-go_lock          | Called for the first local holder of a lock
-go_unlock        | Called on the final local unlock of a lock
-go_dump          | Called to print content of object for debugfs file, or on
-                 | error to dump glock to the log.
-go_type          | The type of the glock, LM_TYPE_.....
-go_callback	 | Called if the DLM sends a callback to drop this lock
-go_flags	 | GLOF_ASPACE is set, if the glock has an address space
-                 | associated with it
-
-The minimum hold time for each lock is the time after a remote lock
-grant for which we ignore remote demote requests. This is in order to
-prevent a situation where locks are being bounced around the cluster
-from node to node with none of the nodes making any progress. This
-tends to show up most with shared mmaped files which are being written
-to by multiple nodes. By delaying the demotion in response to a
-remote callback, that gives the userspace program time to make
-some progress before the pages are unmapped.
-
-There is a plan to try and remove the go_lock and go_unlock callbacks
-if possible, in order to try and speed up the fast path though the locking.
-Also, eventually we hope to make the glock "EX" mode locally shared
-such that any local locking will be done with the i_mutex as required
-rather than via the glock.
-
-Locking rules for glock operations:
-
-Operation     |  GLF_LOCK bit lock held |  gl_lockref.lock spinlock held
--------------------------------------------------------------------------
-go_xmote_th   |       Yes               |       No
-go_xmote_bh   |       Yes               |       No
-go_inval      |       Yes               |       No
-go_demote_ok  |       Sometimes         |       Yes
-go_lock       |       Yes               |       No
-go_unlock     |       Yes               |       No
-go_dump       |       Sometimes         |       Yes
-go_callback   |       Sometimes (N/A)   |       Yes
-
-N.B. Operations must not drop either the bit lock or the spinlock
-if its held on entry. go_dump and do_demote_ok must never block.
-Note that go_dump will only be called if the glock's state
-indicates that it is caching uptodate data.
-
-Glock locking order within GFS2:
-
- 1. i_rwsem (if required)
- 2. Rename glock (for rename only)
- 3. Inode glock(s)
-    (Parents before children, inodes at "same level" with same parent in
-     lock number order)
- 4. Rgrp glock(s) (for (de)allocation operations)
- 5. Transaction glock (via gfs2_trans_begin) for non-read operations
- 6. i_rw_mutex (if required)
- 7. Page lock  (always last, very important!)
-
-There are two glocks per inode. One deals with access to the inode
-itself (locking order as above), and the other, known as the iopen
-glock is used in conjunction with the i_nlink field in the inode to
-determine the lifetime of the inode in question. Locking of inodes
-is on a per-inode basis. Locking of rgrps is on a per rgrp basis.
-In general we prefer to lock local locks prior to cluster locks.
-
-                            Glock Statistics
-                           ------------------
-
-The stats are divided into two sets: those relating to the
-super block and those relating to an individual glock. The
-super block stats are done on a per cpu basis in order to
-try and reduce the overhead of gathering them. They are also
-further divided by glock type. All timings are in nanoseconds.
-
-In the case of both the super block and glock statistics,
-the same information is gathered in each case. The super
-block timing statistics are used to provide default values for
-the glock timing statistics, so that newly created glocks
-should have, as far as possible, a sensible starting point.
-The per-glock counters are initialised to zero when the
-glock is created. The per-glock statistics are lost when
-the glock is ejected from memory.
-
-The statistics are divided into three pairs of mean and
-variance, plus two counters. The mean/variance pairs are
-smoothed exponential estimates and the algorithm used is
-one which will be very familiar to those used to calculation
-of round trip times in network code. See "TCP/IP Illustrated,
-Volume 1", W. Richard Stevens, sect 21.3, "Round-Trip Time Measurement",
-p. 299 and onwards. Also, Volume 2, Sect. 25.10, p. 838 and onwards.
-Unlike the TCP/IP Illustrated case, the mean and variance are
-not scaled, but are in units of integer nanoseconds.
-
-The three pairs of mean/variance measure the following
-things:
-
- 1. DLM lock time (non-blocking requests)
- 2. DLM lock time (blocking requests)
- 3. Inter-request time (again to the DLM)
-
-A non-blocking request is one which will complete right
-away, whatever the state of the DLM lock in question. That
-currently means any requests when (a) the current state of
-the lock is exclusive, i.e. a lock demotion (b) the requested
-state is either null or unlocked (again, a demotion) or (c) the
-"try lock" flag is set. A blocking request covers all the other
-lock requests.
-
-There are two counters. The first is there primarily to show
-how many lock requests have been made, and thus how much data
-has gone into the mean/variance calculations. The other counter
-is counting queuing of holders at the top layer of the glock
-code. Hopefully that number will be a lot larger than the number
-of dlm lock requests issued.
-
-So why gather these statistics? There are several reasons
-we'd like to get a better idea of these timings:
-
-1. To be able to better set the glock "min hold time"
-2. To spot performance issues more easily
-3. To improve the algorithm for selecting resource groups for
-allocation (to base it on lock wait time, rather than blindly
-using a "try lock")
-
-Due to the smoothing action of the updates, a step change in
-some input quantity being sampled will only fully be taken
-into account after 8 samples (or 4 for the variance) and this
-needs to be carefully considered when interpreting the
-results.
-
-Knowing both the time it takes a lock request to complete and
-the average time between lock requests for a glock means we
-can compute the total percentage of the time for which the
-node is able to use a glock vs. time that the rest of the
-cluster has its share. That will be very useful when setting
-the lock min hold time.
-
-Great care has been taken to ensure that we
-measure exactly the quantities that we want, as accurately
-as possible. There are always inaccuracies in any
-measuring system, but I hope this is as accurate as we
-can reasonably make it.
-
-Per sb stats can be found here:
-/sys/kernel/debug/gfs2/<fsname>/sbstats
-Per glock stats can be found here:
-/sys/kernel/debug/gfs2/<fsname>/glstats
-
-Assuming that debugfs is mounted on /sys/kernel/debug and also
-that <fsname> is replaced with the name of the gfs2 filesystem
-in question.
-
-The abbreviations used in the output as are follows:
-
-srtt     - Smoothed round trip time for non-blocking dlm requests
-srttvar  - Variance estimate for srtt
-srttb    - Smoothed round trip time for (potentially) blocking dlm requests
-srttvarb - Variance estimate for srttb
-sirt     - Smoothed inter-request time (for dlm requests)
-sirtvar  - Variance estimate for sirt
-dlm      - Number of dlm requests made (dcnt in glstats file)
-queue    - Number of glock requests queued (qcnt in glstats file)
-
-The sbstats file contains a set of these stats for each glock type (so 8 lines
-for each type) and for each cpu (one column per cpu). The glstats file contains
-a set of these stats for each glock in a similar format to the glocks file, but
-using the format mean/variance for each of the timing stats.
-
-The gfs2_glock_lock_time tracepoint prints out the current values of the stats
-for the glock in question, along with some addition information on each dlm
-reply that is received:
-
-status - The status of the dlm request
-flags  - The dlm request flags
-tdiff  - The time taken by this specific request
-(remaining fields as per above list)
-
-
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index e7b46dac7079..0641429f53a2 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -69,6 +69,7 @@ Documentation for filesystem implementations.
    f2fs
    gfs2
    gfs2-uevents
+   gfs2-glocks
    hfs
    hfsplus
    hpfs
diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst
index 5057e4d9dcd1..0af2e0e11461 100644
--- a/Documentation/filesystems/locking.rst
+++ b/Documentation/filesystems/locking.rst
@@ -239,6 +239,7 @@ prototypes::
 	int (*readpage)(struct file *, struct page *);
 	int (*writepages)(struct address_space *, struct writeback_control *);
 	int (*set_page_dirty)(struct page *page);
+	void (*readahead)(struct readahead_control *);
 	int (*readpages)(struct file *filp, struct address_space *mapping,
 			struct list_head *pages, unsigned nr_pages);
 	int (*write_begin)(struct file *, struct address_space *mapping,
@@ -271,7 +272,8 @@ writepage:		yes, unlocks (see below)
 readpage:		yes, unlocks
 writepages:
 set_page_dirty		no
-readpages:
+readahead:		yes, unlocks
+readpages:		no
 write_begin:		locks the page		 exclusive
 write_end:		yes, unlocks		 exclusive
 bmap:
@@ -295,6 +297,8 @@ the request handler (/dev/loop).
 ->readpage() unlocks the page, either synchronously or via I/O
 completion.
 
+->readahead() unlocks the pages that I/O is attempted on like ->readpage().
+
 ->readpages() populates the pagecache with the passed pages and starts
 I/O against them.  They come unlocked upon I/O completion.
 
diff --git a/Documentation/filesystems/orangefs.rst b/Documentation/filesystems/orangefs.rst
index e41369709c5b..463e37694250 100644
--- a/Documentation/filesystems/orangefs.rst
+++ b/Documentation/filesystems/orangefs.rst
@@ -119,9 +119,7 @@ it comes to that question::
 
     /opt/ofs/bin/pvfs2-genconfig /etc/pvfs2.conf
 
-Create an /etc/pvfs2tab file::
-
-Localhost is fine for your pvfs2tab file:
+Create an /etc/pvfs2tab file (localhost is fine)::
 
     echo tcp://localhost:3334/orangefs /pvfsmnt pvfs2 defaults,noauto 0 0 > \
 	/etc/pvfs2tab
diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst
index c9d2bf96b02d..660dbaf0b9b8 100644
--- a/Documentation/filesystems/overlayfs.rst
+++ b/Documentation/filesystems/overlayfs.rst
@@ -365,8 +365,8 @@ pointed by REDIRECT. This should not be possible on local system as setting
 "trusted." xattrs will require CAP_SYS_ADMIN. But it should be possible
 for untrusted layers like from a pen drive.
 
-Note: redirect_dir={off|nofollow|follow[*]} conflicts with metacopy=on, and
-results in an error.
+Note: redirect_dir={off|nofollow|follow[*]} and nfs_export=on mount options
+conflict with metacopy=on, and will result in an error.
 
 [*] redirect_dir=follow only conflicts with metacopy=on if upperdir=... is
 given.
@@ -560,6 +560,9 @@ When the NFS export feature is enabled, all directory index entries are
 verified on mount time to check that upper file handles are not stale.
 This verification may cause significant overhead in some cases.
 
+Note: the mount options index=off,nfs_export=on are conflicting and will
+result in an error.
+
 
 Testsuite
 ---------
diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
index 38b606991065..48464ba37605 100644
--- a/Documentation/filesystems/proc.rst
+++ b/Documentation/filesystems/proc.rst
@@ -51,6 +51,8 @@ fixes/update part 1.1  Stefani Seibold <stefani@seibold.net>    June 9 2009
   4	Configuring procfs
   4.1	Mount options
 
+  5	Filesystem behavior
+
 Preface
 =======
 
@@ -543,40 +545,8 @@ encoded manner. The codes are the following:
     hg    huge page advise flag
     nh    no huge page advise flag
     mg    mergable advise flag
+    bt  - arm64 BTI guarded page
     ==    =======================================
-
-Note that there is no guarantee that every flag and associated mnemonic will
-be present in all further kernel releases. Things get changed, the flags may
-be vanished or the reverse -- new added. Interpretation of their meaning
-might change in future as well. So each consumer of these flags has to
-follow each specific kernel version for the exact semantic.
-
-This file is only present if the CONFIG_MMU kernel configuration option is
-enabled.
-
-Note: reading /proc/PID/maps or /proc/PID/smaps is inherently racy (consistent
-output can be achieved only in the single read call).
-
-This typically manifests when doing partial reads of these files while the
-memory map is being modified.  Despite the races, we do provide the following
-guarantees:
-
-1) The mapped addresses never go backwards, which implies no two
-   regions will ever overlap.
-2) If there is something at a given vaddr during the entirety of the
-   life of the smaps/maps walk, there will be some output for it.
-
-The /proc/PID/smaps_rollup file includes the same fields as /proc/PID/smaps,
-but their values are the sums of the corresponding values for all mappings of
-the process.  Additionally, it contains these fields:
-
-- Pss_Anon
-- Pss_File
-- Pss_Shmem
-
-They represent the proportional shares of anonymous, file, and shmem pages, as
-described for smaps above.  These fields are omitted in smaps since each
-mapping identifies the type (anon, file, or shmem) of all pages it contains.
 Thus all information in smaps_rollup can be derived from smaps, but at a
 significantly higher cost.
 
@@ -2142,28 +2112,80 @@ The following mount options are supported:
 	=========	========================================================
 	hidepid=	Set /proc/<pid>/ access mode.
 	gid=		Set the group authorized to learn processes information.
+	subset=		Show only the specified subset of procfs.
 	=========	========================================================
 
-hidepid=0 means classic mode - everybody may access all /proc/<pid>/ directories
-(default).
-
-hidepid=1 means users may not access any /proc/<pid>/ directories but their
-own.  Sensitive files like cmdline, sched*, status are now protected against
-other users.  This makes it impossible to learn whether any user runs
-specific program (given the program doesn't reveal itself by its behaviour).
-As an additional bonus, as /proc/<pid>/cmdline is unaccessible for other users,
-poorly written programs passing sensitive information via program arguments are
-now protected against local eavesdroppers.
-
-hidepid=2 means hidepid=1 plus all /proc/<pid>/ will be fully invisible to other
-users.  It doesn't mean that it hides a fact whether a process with a specific
-pid value exists (it can be learned by other means, e.g. by "kill -0 $PID"),
-but it hides process' uid and gid, which may be learned by stat()'ing
-/proc/<pid>/ otherwise.  It greatly complicates an intruder's task of gathering
-information about running processes, whether some daemon runs with elevated
-privileges, whether other user runs some sensitive program, whether other users
-run any program at all, etc.
+hidepid=off or hidepid=0 means classic mode - everybody may access all
+/proc/<pid>/ directories (default).
+
+hidepid=noaccess or hidepid=1 means users may not access any /proc/<pid>/
+directories but their own.  Sensitive files like cmdline, sched*, status are now
+protected against other users.  This makes it impossible to learn whether any
+user runs specific program (given the program doesn't reveal itself by its
+behaviour).  As an additional bonus, as /proc/<pid>/cmdline is unaccessible for
+other users, poorly written programs passing sensitive information via program
+arguments are now protected against local eavesdroppers.
+
+hidepid=invisible or hidepid=2 means hidepid=1 plus all /proc/<pid>/ will be
+fully invisible to other users.  It doesn't mean that it hides a fact whether a
+process with a specific pid value exists (it can be learned by other means, e.g.
+by "kill -0 $PID"), but it hides process' uid and gid, which may be learned by
+stat()'ing /proc/<pid>/ otherwise.  It greatly complicates an intruder's task of
+gathering information about running processes, whether some daemon runs with
+elevated privileges, whether other user runs some sensitive program, whether
+other users run any program at all, etc.
+
+hidepid=ptraceable or hidepid=4 means that procfs should only contain
+/proc/<pid>/ directories that the caller can ptrace.
 
 gid= defines a group authorized to learn processes information otherwise
 prohibited by hidepid=.  If you use some daemon like identd which needs to learn
 information about processes information, just add identd to this group.
+
+subset=pid hides all top level files and directories in the procfs that
+are not related to tasks.
+
+5	Filesystem behavior
+----------------------------
+
+Originally, before the advent of pid namepsace, procfs was a global file
+system. It means that there was only one procfs instance in the system.
+
+When pid namespace was added, a separate procfs instance was mounted in
+each pid namespace. So, procfs mount options are global among all
+mountpoints within the same namespace.
+
+::
+
+# grep ^proc /proc/mounts
+proc /proc proc rw,relatime,hidepid=2 0 0
+
+# strace -e mount mount -o hidepid=1 -t proc proc /tmp/proc
+mount("proc", "/tmp/proc", "proc", 0, "hidepid=1") = 0
++++ exited with 0 +++
+
+# grep ^proc /proc/mounts
+proc /proc proc rw,relatime,hidepid=2 0 0
+proc /tmp/proc proc rw,relatime,hidepid=2 0 0
+
+and only after remounting procfs mount options will change at all
+mountpoints.
+
+# mount -o remount,hidepid=1 -t proc proc /tmp/proc
+
+# grep ^proc /proc/mounts
+proc /proc proc rw,relatime,hidepid=1 0 0
+proc /tmp/proc proc rw,relatime,hidepid=1 0 0
+
+This behavior is different from the behavior of other filesystems.
+
+The new procfs behavior is more like other filesystems. Each procfs mount
+creates a new procfs instance. Mount options affect own procfs instance.
+It means that it became possible to have several procfs instances
+displaying tasks with different filtering options in one pid namespace.
+
+# mount -o hidepid=invisible -t proc proc /proc
+# mount -o hidepid=noaccess -t proc proc /tmp/proc
+# grep ^proc /proc/mounts
+proc /proc proc rw,relatime,hidepid=invisible 0 0
+proc /tmp/proc proc rw,relatime,hidepid=noaccess 0 0
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.rst b/Documentation/filesystems/ramfs-rootfs-initramfs.rst
index 6c576e241d86..3fddacc6bf14 100644
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.rst
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.rst
@@ -71,7 +71,7 @@ be allowed write access to a ramfs mount.
 
 A ramfs derivative called tmpfs was created to add size limits, and the ability
 to write the data to swap space.  Normal users can be allowed write access to
-tmpfs mounts.  See Documentation/filesystems/tmpfs.txt for more information.
+tmpfs mounts.  See Documentation/filesystems/tmpfs.rst for more information.
 
 What is rootfs?
 ---------------
diff --git a/Documentation/filesystems/sysfs.rst b/Documentation/filesystems/sysfs.rst
index 290891c3fecb..ab0f7795792b 100644
--- a/Documentation/filesystems/sysfs.rst
+++ b/Documentation/filesystems/sysfs.rst
@@ -20,7 +20,7 @@ a means to export kernel data structures, their attributes, and the
 linkages between them to userspace.
 
 sysfs is tied inherently to the kobject infrastructure. Please read
-Documentation/kobject.txt for more information concerning the kobject
+Documentation/core-api/kobject.rst for more information concerning the kobject
 interface.
 
 
diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst
index 7d4d09dd5e6d..ed17771c212b 100644
--- a/Documentation/filesystems/vfs.rst
+++ b/Documentation/filesystems/vfs.rst
@@ -706,6 +706,7 @@ cache in your filesystem.  The following members are defined:
 		int (*readpage)(struct file *, struct page *);
 		int (*writepages)(struct address_space *, struct writeback_control *);
 		int (*set_page_dirty)(struct page *page);
+		void (*readahead)(struct readahead_control *);
 		int (*readpages)(struct file *filp, struct address_space *mapping,
 				 struct list_head *pages, unsigned nr_pages);
 		int (*write_begin)(struct file *, struct address_space *mapping,
@@ -781,12 +782,26 @@ cache in your filesystem.  The following members are defined:
 	If defined, it should set the PageDirty flag, and the
 	PAGECACHE_TAG_DIRTY tag in the radix tree.
 
+``readahead``
+	Called by the VM to read pages associated with the address_space
+	object.  The pages are consecutive in the page cache and are
+	locked.  The implementation should decrement the page refcount
+	after starting I/O on each page.  Usually the page will be
+	unlocked by the I/O completion handler.  If the filesystem decides
+	to stop attempting I/O before reaching the end of the readahead
+	window, it can simply return.  The caller will decrement the page
+	refcount and unlock the remaining pages for you.  Set PageUptodate
+	if the I/O completes successfully.  Setting PageError on any page
+	will be ignored; simply unlock the page if an I/O error occurs.
+
 ``readpages``
 	called by the VM to read pages associated with the address_space
 	object.  This is essentially just a vector version of readpage.
 	Instead of just one page, several pages are requested.
 	readpages is only used for read-ahead, so read errors are
 	ignored.  If anything goes wrong, feel free to give up.
+	This interface is deprecated and will be removed by the end of
+	2020; implement readahead instead.
 
 ``write_begin``
 	Called by the generic buffered write code to ask the filesystem
diff --git a/Documentation/filesystems/virtiofs.rst b/Documentation/filesystems/virtiofs.rst
index e06e4951cb39..fd4d2484e949 100644
--- a/Documentation/filesystems/virtiofs.rst
+++ b/Documentation/filesystems/virtiofs.rst
@@ -39,6 +39,20 @@ Mount file system with tag ``myfs`` on ``/mnt``:
 Please see https://virtio-fs.gitlab.io/ for details on how to configure QEMU
 and the virtiofsd daemon.
 
+Mount options
+-------------
+
+virtiofs supports general VFS mount options, for example, remount,
+ro, rw, context, etc. It also supports FUSE mount options.
+
+atime behavior
+^^^^^^^^^^^^^^
+
+The atime-related mount options, for example, noatime, strictatime,
+are ignored. The atime behavior for virtiofs is the same as the
+underlying filesystem of the directory that has been exported
+on the host.
+
 Internals
 =========
 Since the virtio-fs device uses the FUSE protocol for file system requests, the
diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst
index 0efede580039..4cc74325bf91 100644
--- a/Documentation/gpu/amdgpu.rst
+++ b/Documentation/gpu/amdgpu.rst
@@ -202,3 +202,91 @@ busy_percent
 
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
    :doc: busy_percent
+
+GPU Product Information
+=======================
+
+Information about the GPU can be obtained on certain cards
+via sysfs
+
+product_name
+------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+   :doc: product_name
+
+product_number
+--------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+   :doc: product_name
+
+serial_number
+-------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+   :doc: serial_number
+
+unique_id
+---------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+   :doc: unique_id
+
+GPU Memory Usage Information
+============================
+
+Various memory accounting can be accessed via sysfs
+
+mem_info_vram_total
+-------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
+   :doc: mem_info_vram_total
+
+mem_info_vram_used
+------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
+   :doc: mem_info_vram_used
+
+mem_info_vis_vram_total
+-----------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
+   :doc: mem_info_vis_vram_total
+
+mem_info_vis_vram_used
+----------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
+   :doc: mem_info_vis_vram_used
+
+mem_info_gtt_total
+------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c
+   :doc: mem_info_gtt_total
+
+mem_info_gtt_used
+-----------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c
+   :doc: mem_info_gtt_used
+
+PCIe Accounting Information
+===========================
+
+pcie_bw
+-------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+   :doc: pcie_bw
+
+pcie_replay_count
+-----------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+   :doc: pcie_replay_count
+
+
diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst
index a73320576ca9..12272b168580 100644
--- a/Documentation/gpu/drm-internals.rst
+++ b/Documentation/gpu/drm-internals.rst
@@ -132,6 +132,18 @@ be unmapped; on many devices, the ROM address decoder is shared with
 other BARs, so leaving it mapped could cause undesired behaviour like
 hangs or memory corruption.
 
+Managed Resources
+-----------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_managed.c
+   :doc: managed resources
+
+.. kernel-doc:: drivers/gpu/drm/drm_managed.c
+   :export:
+
+.. kernel-doc:: include/drm/drm_managed.h
+   :internal:
+
 Bus-specific Device Registration and PCI Support
 ------------------------------------------------
 
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index 906771e03103..397314d08f77 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -3,7 +3,7 @@ Kernel Mode Setting (KMS)
 =========================
 
 Drivers must initialize the mode setting core by calling
-drm_mode_config_init() on the DRM device. The function
+drmm_mode_config_init() on the DRM device. The function
 initializes the :c:type:`struct drm_device <drm_device>`
 mode_config field and never fails. Once done, mode configuration must
 be setup by initializing the following fields.
@@ -397,6 +397,9 @@ Connector Functions Reference
 Writeback Connectors
 --------------------
 
+.. kernel-doc:: include/drm/drm_writeback.h
+  :internal:
+
 .. kernel-doc:: drivers/gpu/drm/drm_writeback.c
   :doc: overview
 
diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst
index c77b32601260..1839762044be 100644
--- a/Documentation/gpu/drm-mm.rst
+++ b/Documentation/gpu/drm-mm.rst
@@ -373,15 +373,6 @@ GEM CMA Helper Functions Reference
 .. kernel-doc:: drivers/gpu/drm/drm_gem_cma_helper.c
    :export:
 
-VRAM Helper Function Reference
-==============================
-
-.. kernel-doc:: drivers/gpu/drm/drm_vram_helper_common.c
-   :doc: overview
-
-.. kernel-doc:: include/drm/drm_gem_vram_helper.h
-   :internal:
-
 GEM VRAM Helper Functions Reference
 -----------------------------------
 
diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst
index f6d363b6756e..429b08aac797 100644
--- a/Documentation/gpu/i915.rst
+++ b/Documentation/gpu/i915.rst
@@ -391,19 +391,19 @@ Global GTT views
 GTT Fences and Swizzling
 ------------------------
 
-.. kernel-doc:: drivers/gpu/drm/i915/i915_gem_fence_reg.c
+.. kernel-doc:: drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c
    :internal:
 
 Global GTT Fence Handling
 ~~~~~~~~~~~~~~~~~~~~~~~~~
 
-.. kernel-doc:: drivers/gpu/drm/i915/i915_gem_fence_reg.c
+.. kernel-doc:: drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c
    :doc: fence register handling
 
 Hardware Tiling and Swizzling Details
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-.. kernel-doc:: drivers/gpu/drm/i915/i915_gem_fence_reg.c
+.. kernel-doc:: drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c
    :doc: tiling swizzling details
 
 Object Tiling IOCTLs
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 439656f55c5d..658b52f7ffc6 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -347,18 +347,6 @@ Contact: Sean Paul
 
 Level: Starter
 
-Remove drm_display_mode.hsync
------------------------------
-
-We have drm_mode_hsync() to calculate this from hsync_start/end, since drivers
-shouldn't/don't use this, remove this member to avoid any temptations to use it
-in the future. If there is any debug code using drm_display_mode.hsync, convert
-it to use drm_mode_hsync() instead.
-
-Contact: Sean Paul
-
-Level: Starter
-
 connector register/unregister fixes
 -----------------------------------
 
diff --git a/Documentation/hwmon/bcm54140.rst b/Documentation/hwmon/bcm54140.rst
new file mode 100644
index 000000000000..bc6ea4b45966
--- /dev/null
+++ b/Documentation/hwmon/bcm54140.rst
@@ -0,0 +1,45 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Broadcom BCM54140 Quad SGMII/QSGMII PHY
+=======================================
+
+Supported chips:
+
+   * Broadcom BCM54140
+
+     Datasheet: not public
+
+Author: Michael Walle <michael@walle.cc>
+
+Description
+-----------
+
+The Broadcom BCM54140 is a Quad SGMII/QSGMII PHY which supports monitoring
+its die temperature as well as two analog voltages.
+
+The AVDDL is a 1.0V analogue voltage, the AVDDH is a 3.3V analogue voltage.
+Both voltages and the temperature are measured in a round-robin fashion.
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= ========================================================
+in0_label		"AVDDL"
+in0_input		Measured AVDDL voltage.
+in0_min			Minimum AVDDL voltage.
+in0_max			Maximum AVDDL voltage.
+in0_alarm		AVDDL voltage alarm.
+
+in1_label		"AVDDH"
+in1_input		Measured AVDDH voltage.
+in1_min			Minimum AVDDH voltage.
+in1_max			Maximum AVDDH voltage.
+in1_alarm		AVDDH voltage alarm.
+
+temp1_input		Die temperature.
+temp1_min		Minimum die temperature.
+temp1_max		Maximum die temperature.
+temp1_alarm		Die temperature alarm.
+======================= ========================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 8ef62fd39787..1f0affb3b6e0 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -42,6 +42,7 @@ Hardware Monitoring Kernel Drivers
    asb100
    asc7621
    aspeed-pwm-tacho
+   bcm54140
    bel-pfe
    coretemp
    da9052
diff --git a/Documentation/i2c/i2c.svg b/Documentation/i2c/i2c.svg
deleted file mode 100644
index 5979405ad1c3..000000000000
--- a/Documentation/i2c/i2c.svg
+++ /dev/null
@@ -1,1341 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   sodipodi:docname="i2c.svg"
-   inkscape:version="0.92.3 (2405546, 2018-03-11)"
-   version="1.1"
-   id="svg2"
-   viewBox="0 0 813.34215 261.01596"
-   height="73.664505mm"
-   width="229.54323mm">
-  <defs
-     id="defs4">
-    <marker
-       inkscape:stockid="DotM"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker8861"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path8859"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
-    </marker>
-    <marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker6165"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="DotM"
-       inkscape:collect="always">
-      <path
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         id="path6163"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker2713"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="DotM">
-      <path
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         id="path2711"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="DotM"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="DotM"
-       style="overflow:visible"
-       inkscape:isstock="true"
-       inkscape:collect="always">
-      <path
-         id="path1795"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker6389"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="Arrow2Mend">
-      <path
-         transform="scale(-0.6)"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         id="path6387"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="TriangleOutM"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="TriangleOutM"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path4107"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="scale(0.4)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="TriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker5333"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path5335"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="scale(0.8)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="TriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="TriangleOutL"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path5049"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="scale(0.8)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="DotS"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="DotS"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path9326"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         style="fill:#404040;fill-opacity:1;fill-rule:evenodd;stroke:#404040;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.2,0,0,0.2,1.48,0.2)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mstart"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mstart"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path9283"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(0.6)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path9097"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker8935"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path8937"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker8781"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path8783"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Lend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Lend"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path4700"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="matrix(-1.1,0,0,-1.1,-1.1,0)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="EmptyTriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="EmptyTriangleOutL"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         id="path4502"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.8,0,0,0.8,-4.8,0)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="EmptyTriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="EmptyTriangleOutL-4"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4502-7"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
-    </marker>
-    <marker
-       inkscape:stockid="EmptyTriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="EmptyTriangleOutL-4-4"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4502-7-5"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
-    </marker>
-    <marker
-       inkscape:stockid="EmptyTriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="EmptyTriangleOutL-7"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4502-5"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
-    </marker>
-    <marker
-       inkscape:stockid="EmptyTriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="EmptyTriangleOutL-6"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4502-2"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
-    </marker>
-    <marker
-       inkscape:stockid="EmptyTriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="EmptyTriangleOutL-78"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4502-57"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
-    </marker>
-    <marker
-       inkscape:stockid="EmptyTriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="EmptyTriangleOutL-1"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4502-8"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
-    </marker>
-    <marker
-       inkscape:stockid="EmptyTriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="EmptyTriangleOutL-9"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4502-75"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
-    </marker>
-    <marker
-       inkscape:stockid="EmptyTriangleOutL"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="EmptyTriangleOutL-78-2"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4502-57-6"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-3"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-6"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-3-5"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-6-3"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-3-5-6"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-6-3-2"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-3-5-6-1"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-6-3-2-2"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-3-5-7"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-6-3-0"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-3-9"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-6-36"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-31"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-9"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-3-5-7-5"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-6-3-0-4"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-3-9-6"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-6-36-5"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend-3-5-7-3"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4369-6-3-0-5"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-3"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-1"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-3-7"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-1-8"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6-6"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1-3"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-2"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-0"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6-5"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1-5"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-4"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-7"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6-5-9"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1-5-3"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6-5-4"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1-5-5"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6-5-4-4"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1-5-5-3"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6-5-4-4-9"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1-5-5-3-2"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6-5-4-4-6"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1-5-5-3-8"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6-5-4-4-2"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1-5-5-3-7"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-3"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-6"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-6-5-4-4-6-5"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-1-5-5-3-8-3"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-27"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-09"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-27-6"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-09-2"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-27-0"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-09-23"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-9"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-7"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-4-6"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-7-7"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-4-6-3"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-7-7-5"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-4-6-2"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-7-7-9"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="TriangleOutM"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="TriangleOutM-2"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path4107-7"
-         d="M 5.77,0 -2.88,5 V -5 Z"
-         style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="scale(0.4)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mstart"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mstart-9"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9283-3"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker9095-1-5-4-6-6"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path9097-2-0-7-7-0"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6)" />
-    </marker>
-    <marker
-       inkscape:stockid="DotM"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="DotM-3"
-       style="overflow:visible"
-       inkscape:isstock="true">
-      <path
-         inkscape:connector-curvature="0"
-         id="path1795-7"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
-    </marker>
-    <marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker2713-9"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="DotM">
-      <path
-         inkscape:connector-curvature="0"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         id="path2711-2" />
-    </marker>
-    <marker
-       inkscape:stockid="DotM"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="DotM-2"
-       style="overflow:visible"
-       inkscape:isstock="true"
-       inkscape:collect="always">
-      <path
-         inkscape:connector-curvature="0"
-         id="path1795-8"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
-    </marker>
-    <marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker2713-3"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="DotM">
-      <path
-         inkscape:connector-curvature="0"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         id="path2711-6" />
-    </marker>
-    <marker
-       inkscape:stockid="DotM"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="DotM-1"
-       style="overflow:visible"
-       inkscape:isstock="true"
-       inkscape:collect="always">
-      <path
-         inkscape:connector-curvature="0"
-         id="path1795-2"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
-    </marker>
-    <marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker2713-94"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="DotM">
-      <path
-         inkscape:connector-curvature="0"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         id="path2711-7" />
-    </marker>
-    <marker
-       inkscape:stockid="DotM"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="DotM-8"
-       style="overflow:visible"
-       inkscape:isstock="true"
-       inkscape:collect="always">
-      <path
-         inkscape:connector-curvature="0"
-         id="path1795-4"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
-    </marker>
-    <marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker2713-36"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="DotM">
-      <path
-         inkscape:connector-curvature="0"
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         id="path2711-1" />
-    </marker>
-    <marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker6165-5"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="DotM">
-      <path
-         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
-         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
-         id="path6163-5"
-         inkscape:connector-curvature="0" />
-    </marker>
-  </defs>
-  <sodipodi:namedview
-     showguides="true"
-     inkscape:window-maximized="1"
-     inkscape:window-y="0"
-     inkscape:window-x="0"
-     inkscape:window-height="1015"
-     inkscape:window-width="1920"
-     showgrid="true"
-     inkscape:current-layer="layer1"
-     inkscape:document-units="px"
-     inkscape:cy="214.66765"
-     inkscape:cx="-167.56857"
-     inkscape:zoom="0.70710678"
-     inkscape:pageshadow="2"
-     inkscape:pageopacity="0.0"
-     borderopacity="1.0"
-     bordercolor="#666666"
-     pagecolor="#ffffff"
-     id="base"
-     inkscape:snap-to-guides="true"
-     inkscape:snap-grids="true"
-     inkscape:snap-bbox="false"
-     inkscape:object-nodes="true"
-     fit-margin-top="5"
-     fit-margin-left="5"
-     fit-margin-right="5"
-     fit-margin-bottom="5">
-    <inkscape:grid
-       type="xygrid"
-       id="grid4451"
-       originx="-93.377219"
-       originy="-347.2523" />
-  </sodipodi:namedview>
-  <metadata
-     id="metadata7">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-        <dc:creator>
-          <cc:Agent>
-            <dc:title>Luca Ceresoli</dc:title>
-          </cc:Agent>
-        </dc:creator>
-        <dc:date>2020</dc:date>
-        <cc:license
-           rdf:resource="http://creativecommons.org/licenses/by-sa/4.0/" />
-      </cc:Work>
-      <cc:License
-         rdf:about="http://creativecommons.org/licenses/by-sa/4.0/">
-        <cc:permits
-           rdf:resource="http://creativecommons.org/ns#Reproduction" />
-        <cc:permits
-           rdf:resource="http://creativecommons.org/ns#Distribution" />
-        <cc:requires
-           rdf:resource="http://creativecommons.org/ns#Notice" />
-        <cc:requires
-           rdf:resource="http://creativecommons.org/ns#Attribution" />
-        <cc:permits
-           rdf:resource="http://creativecommons.org/ns#DerivativeWorks" />
-        <cc:requires
-           rdf:resource="http://creativecommons.org/ns#ShareAlike" />
-      </cc:License>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Livello 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-93.377215,-444.09395)">
-    <rect
-       style="opacity:1;fill:#ffb9b9;fill-opacity:1;stroke:#f00000;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       id="rect4424-3-2-9-7"
-       width="112.5"
-       height="113.75008"
-       x="112.5"
-       y="471.11221"
-       rx="0"
-       ry="0" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="167.5354"
-       y="521.46259"
-       id="text4349"><tspan
-         sodipodi:role="line"
-         x="167.5354"
-         y="521.46259"
-         style="font-size:25px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle"
-         id="tspan1273">I2C</tspan><tspan
-         sodipodi:role="line"
-         x="167.5354"
-         y="552.71259"
-         style="font-size:25px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle"
-         id="tspan1285">Master</tspan></text>
-    <rect
-       style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
-       id="rect4424-3-2-9-7-3-3-5-3"
-       width="112.49998"
-       height="112.50001"
-       x="262.5"
-       y="471.11218"
-       rx="0"
-       ry="0" />
-    <path
-       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968767;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       d="m 112.50002,639.86223 c 712.50002,0 712.50002,0 712.50002,0"
-       id="path4655-9-3-65-5-6"
-       inkscape:connector-curvature="0" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="318.59131"
-       y="520.83752"
-       id="text4349-26"><tspan
-         sodipodi:role="line"
-         x="318.59131"
-         y="520.83752"
-         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1273-8">I2C</tspan><tspan
-         sodipodi:role="line"
-         x="318.59131"
-         y="552.08752"
-         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1287">Slave</tspan></text>
-    <path
-       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968767;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       d="m 112.49995,677.36223 c 712.50005,0 712.50005,0 712.50005,0"
-       id="path4655-9-3-65-5-6-2"
-       inkscape:connector-curvature="0" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="861.07312"
-       y="687.03937"
-       id="text4349-7"><tspan
-         sodipodi:role="line"
-         x="861.07312"
-         y="687.03937"
-         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;writing-mode:lr-tb;direction:ltr;text-anchor:middle;stroke-width:1px"
-         id="tspan1285-9">SCL</tspan></text>
-    <flowRoot
-       xml:space="preserve"
-       id="flowRoot1627"
-       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:Sans;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"><flowRegion
-         id="flowRegion1629"><rect
-           id="rect1631"
-           width="220"
-           height="120"
-           x="140"
-           y="-126.29921" /></flowRegion><flowPara
-         id="flowPara1633" /></flowRoot>    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="863.31921"
-       y="648.96735"
-       id="text4349-7-3"><tspan
-         sodipodi:role="line"
-         x="863.31921"
-         y="648.96735"
-         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1285-9-6">SDA</tspan></text>
-    <rect
-       style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
-       id="rect4424-3-2-9-7-3-3-5-3-0"
-       width="112.49998"
-       height="112.50002"
-       x="412.5"
-       y="471.11215"
-       rx="0"
-       ry="0" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="468.59131"
-       y="520.83746"
-       id="text4349-26-6"><tspan
-         sodipodi:role="line"
-         x="468.59131"
-         y="520.83746"
-         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1273-8-2">I2C</tspan><tspan
-         sodipodi:role="line"
-         x="468.59131"
-         y="552.08746"
-         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1287-6">Slave</tspan></text>
-    <rect
-       style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
-       id="rect4424-3-2-9-7-3-3-5-3-1"
-       width="112.49998"
-       height="112.50002"
-       x="562.5"
-       y="471.11215"
-       rx="0"
-       ry="0" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="618.59131"
-       y="520.83746"
-       id="text4349-26-8"><tspan
-         sodipodi:role="line"
-         x="618.59131"
-         y="520.83746"
-         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1273-8-7">I2C</tspan><tspan
-         sodipodi:role="line"
-         x="618.59131"
-         y="552.08746"
-         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1287-9">Slave</tspan></text>
-    <path
-       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM)"
-       d="m 150,583.61221 v 93.75"
-       id="path4655-9-3-65-5-6-20"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cc" />
-    <path
-       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713)"
-       d="m 187.5,583.61221 v 56.25"
-       id="path4655-9-3-65-5-6-20-2"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cc" />
-    <path
-       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM-2)"
-       d="m 300,583.61221 v 93.75"
-       id="path4655-9-3-65-5-6-20-9"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cc" />
-    <path
-       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713-9)"
-       d="m 337.5,583.61221 v 56.25"
-       id="path4655-9-3-65-5-6-20-2-7"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cc" />
-    <path
-       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM-1)"
-       d="m 450,583.61221 v 93.75"
-       id="path4655-9-3-65-5-6-20-93"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cc" />
-    <path
-       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713-3)"
-       d="m 487.5,583.61221 v 56.25"
-       id="path4655-9-3-65-5-6-20-2-1"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cc" />
-    <path
-       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM-8)"
-       d="m 600,583.61221 v 93.75"
-       id="path4655-9-3-65-5-6-20-5"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cc" />
-    <path
-       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713-94)"
-       d="m 637.5,583.61221 v 56.25"
-       id="path4655-9-3-65-5-6-20-2-0"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cc" />
-    <path
-       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-start:url(#marker6165);marker-end:url(#marker6165)"
-       d="m 750,471.11221 v 28.125 l 9.375,9.375 -18.74999,18.75 18.74999,18.75 -18.74999,18.75 18.74999,18.75 -9.375,9.375 v 28.125 0 0 56.25"
-       id="path6135"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cccccccccccc" />
-    <path
-       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-start:url(#marker8861);marker-end:url(#marker6165-5)"
-       d="m 787.49999,471.11221 v 28.125 l 9.375,9.375 -18.74999,18.75 18.74999,18.75 -18.74999,18.75 18.74999,18.75 -9.375,9.375 v 28.125 0 0 18.75001"
-       id="path6135-4"
-       inkscape:connector-curvature="0"
-       sodipodi:nodetypes="cccccccccccc" />
-    <path
-       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968719;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       d="m 712.5,471.11221 c 112.49999,0 112.49999,0 112.49999,0"
-       id="path4655-9-3-65-5-6-7"
-       inkscape:connector-curvature="0" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="859.94275"
-       y="480.03558"
-       id="text4349-7-3-6"><tspan
-         sodipodi:role="line"
-         x="859.94275"
-         y="480.03558"
-         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1285-9-6-5">V<tspan
-   style="font-size:64.99999762%;baseline-shift:sub"
-   id="tspan9307">DD</tspan></tspan></text>
-  </g>
-</svg>
diff --git a/Documentation/i2c/i2c_bus.svg b/Documentation/i2c/i2c_bus.svg
new file mode 100644
index 000000000000..3170de976373
--- /dev/null
+++ b/Documentation/i2c/i2c_bus.svg
@@ -0,0 +1,1341 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   sodipodi:docname="i2c_bus.svg"
+   inkscape:version="0.92.3 (2405546, 2018-03-11)"
+   version="1.1"
+   id="svg2"
+   viewBox="0 0 813.34215 261.01596"
+   height="73.664505mm"
+   width="229.54323mm">
+  <defs
+     id="defs4">
+    <marker
+       inkscape:stockid="DotM"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker8861"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path8859"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+    </marker>
+    <marker
+       inkscape:isstock="true"
+       style="overflow:visible"
+       id="marker6165"
+       refX="0"
+       refY="0"
+       orient="auto"
+       inkscape:stockid="DotM"
+       inkscape:collect="always">
+      <path
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         id="path6163"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:isstock="true"
+       style="overflow:visible"
+       id="marker2713"
+       refX="0"
+       refY="0"
+       orient="auto"
+       inkscape:stockid="DotM">
+      <path
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         id="path2711"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="DotM"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="DotM"
+       style="overflow:visible"
+       inkscape:isstock="true"
+       inkscape:collect="always">
+      <path
+         id="path1795"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:isstock="true"
+       style="overflow:visible"
+       id="marker6389"
+       refX="0"
+       refY="0"
+       orient="auto"
+       inkscape:stockid="Arrow2Mend">
+      <path
+         transform="scale(-0.6)"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         id="path6387"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="TriangleOutM"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="TriangleOutM"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path4107"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="scale(0.4)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="TriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker5333"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path5335"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="scale(0.8)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="TriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="TriangleOutL"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path5049"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="scale(0.8)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="DotS"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="DotS"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path9326"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         style="fill:#404040;fill-opacity:1;fill-rule:evenodd;stroke:#404040;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.2,0,0,0.2,1.48,0.2)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mstart"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mstart"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path9283"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(0.6)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path9097"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker8935"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path8937"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker8781"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path8783"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Lend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Lend"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path4700"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="matrix(-1.1,0,0,-1.1,-1.1,0)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="EmptyTriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="EmptyTriangleOutL"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         id="path4502"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.8,0,0,0.8,-4.8,0)"
+         inkscape:connector-curvature="0" />
+    </marker>
+    <marker
+       inkscape:stockid="EmptyTriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="EmptyTriangleOutL-4"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4502-7"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="EmptyTriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="EmptyTriangleOutL-4-4"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4502-7-5"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="EmptyTriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="EmptyTriangleOutL-7"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4502-5"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="EmptyTriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="EmptyTriangleOutL-6"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4502-2"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="EmptyTriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="EmptyTriangleOutL-78"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4502-57"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="EmptyTriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="EmptyTriangleOutL-1"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4502-8"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="EmptyTriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="EmptyTriangleOutL-9"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4502-75"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="EmptyTriangleOutL"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="EmptyTriangleOutL-78-2"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4502-57-6"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-3"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-6"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-3-5"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-6-3"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-3-5-6"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-6-3-2"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-3-5-6-1"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-6-3-2-2"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-3-5-7"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-6-3-0"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-3-9"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-6-36"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-31"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-9"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-3-5-7-5"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-6-3-0-4"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-3-9-6"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-6-36-5"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mend-3-5-7-3"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4369-6-3-0-5"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-3"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-1"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-3-7"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-1-8"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6-6"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1-3"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-2"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-0"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6-5"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1-5"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-4"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-7"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6-5-9"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1-5-3"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6-5-4"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1-5-5"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6-5-4-4"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1-5-5-3"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6-5-4-4-9"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1-5-5-3-2"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6-5-4-4-6"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1-5-5-3-8"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6-5-4-4-2"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1-5-5-3-7"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-3"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-6"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-6-5-4-4-6-5"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-1-5-5-3-8-3"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-27"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-09"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-27-6"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-09-2"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-27-0"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-09-23"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-9"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-7"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-4-6"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-7-7"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-4-6-3"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-7-7-5"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-4-6-2"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-7-7-9"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="TriangleOutM"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="TriangleOutM-2"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path4107-7"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="scale(0.4)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mstart"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="Arrow2Mstart-9"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9283-3"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="marker9095-1-5-4-6-6"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path9097-2-0-7-7-0"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+         transform="scale(-0.6)" />
+    </marker>
+    <marker
+       inkscape:stockid="DotM"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="DotM-3"
+       style="overflow:visible"
+       inkscape:isstock="true">
+      <path
+         inkscape:connector-curvature="0"
+         id="path1795-7"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+    </marker>
+    <marker
+       inkscape:isstock="true"
+       style="overflow:visible"
+       id="marker2713-9"
+       refX="0"
+       refY="0"
+       orient="auto"
+       inkscape:stockid="DotM">
+      <path
+         inkscape:connector-curvature="0"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         id="path2711-2" />
+    </marker>
+    <marker
+       inkscape:stockid="DotM"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="DotM-2"
+       style="overflow:visible"
+       inkscape:isstock="true"
+       inkscape:collect="always">
+      <path
+         inkscape:connector-curvature="0"
+         id="path1795-8"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+    </marker>
+    <marker
+       inkscape:isstock="true"
+       style="overflow:visible"
+       id="marker2713-3"
+       refX="0"
+       refY="0"
+       orient="auto"
+       inkscape:stockid="DotM">
+      <path
+         inkscape:connector-curvature="0"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         id="path2711-6" />
+    </marker>
+    <marker
+       inkscape:stockid="DotM"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="DotM-1"
+       style="overflow:visible"
+       inkscape:isstock="true"
+       inkscape:collect="always">
+      <path
+         inkscape:connector-curvature="0"
+         id="path1795-2"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+    </marker>
+    <marker
+       inkscape:isstock="true"
+       style="overflow:visible"
+       id="marker2713-94"
+       refX="0"
+       refY="0"
+       orient="auto"
+       inkscape:stockid="DotM">
+      <path
+         inkscape:connector-curvature="0"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         id="path2711-7" />
+    </marker>
+    <marker
+       inkscape:stockid="DotM"
+       orient="auto"
+       refY="0"
+       refX="0"
+       id="DotM-8"
+       style="overflow:visible"
+       inkscape:isstock="true"
+       inkscape:collect="always">
+      <path
+         inkscape:connector-curvature="0"
+         id="path1795-4"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+    </marker>
+    <marker
+       inkscape:isstock="true"
+       style="overflow:visible"
+       id="marker2713-36"
+       refX="0"
+       refY="0"
+       orient="auto"
+       inkscape:stockid="DotM">
+      <path
+         inkscape:connector-curvature="0"
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         id="path2711-1" />
+    </marker>
+    <marker
+       inkscape:isstock="true"
+       style="overflow:visible"
+       id="marker6165-5"
+       refX="0"
+       refY="0"
+       orient="auto"
+       inkscape:stockid="DotM">
+      <path
+         transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+         d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         id="path6163-5"
+         inkscape:connector-curvature="0" />
+    </marker>
+  </defs>
+  <sodipodi:namedview
+     showguides="true"
+     inkscape:window-maximized="1"
+     inkscape:window-y="0"
+     inkscape:window-x="0"
+     inkscape:window-height="1015"
+     inkscape:window-width="1920"
+     showgrid="true"
+     inkscape:current-layer="layer1"
+     inkscape:document-units="px"
+     inkscape:cy="214.66765"
+     inkscape:cx="-167.56857"
+     inkscape:zoom="0.70710678"
+     inkscape:pageshadow="2"
+     inkscape:pageopacity="0.0"
+     borderopacity="1.0"
+     bordercolor="#666666"
+     pagecolor="#ffffff"
+     id="base"
+     inkscape:snap-to-guides="true"
+     inkscape:snap-grids="true"
+     inkscape:snap-bbox="false"
+     inkscape:object-nodes="true"
+     fit-margin-top="5"
+     fit-margin-left="5"
+     fit-margin-right="5"
+     fit-margin-bottom="5">
+    <inkscape:grid
+       type="xygrid"
+       id="grid4451"
+       originx="-93.377219"
+       originy="-347.2523" />
+  </sodipodi:namedview>
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+        <dc:creator>
+          <cc:Agent>
+            <dc:title>Luca Ceresoli</dc:title>
+          </cc:Agent>
+        </dc:creator>
+        <dc:date>2020</dc:date>
+        <cc:license
+           rdf:resource="http://creativecommons.org/licenses/by-sa/4.0/" />
+      </cc:Work>
+      <cc:License
+         rdf:about="http://creativecommons.org/licenses/by-sa/4.0/">
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#Reproduction" />
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#Distribution" />
+        <cc:requires
+           rdf:resource="http://creativecommons.org/ns#Notice" />
+        <cc:requires
+           rdf:resource="http://creativecommons.org/ns#Attribution" />
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#DerivativeWorks" />
+        <cc:requires
+           rdf:resource="http://creativecommons.org/ns#ShareAlike" />
+      </cc:License>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Livello 1"
+     inkscape:groupmode="layer"
+     id="layer1"
+     transform="translate(-93.377215,-444.09395)">
+    <rect
+       style="opacity:1;fill:#ffb9b9;fill-opacity:1;stroke:#f00000;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       id="rect4424-3-2-9-7"
+       width="112.5"
+       height="113.75008"
+       x="112.5"
+       y="471.11221"
+       rx="0"
+       ry="0" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="167.5354"
+       y="521.46259"
+       id="text4349"><tspan
+         sodipodi:role="line"
+         x="167.5354"
+         y="521.46259"
+         style="font-size:25px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle"
+         id="tspan1273">I2C</tspan><tspan
+         sodipodi:role="line"
+         x="167.5354"
+         y="552.71259"
+         style="font-size:25px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle"
+         id="tspan1285">Master</tspan></text>
+    <rect
+       style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
+       id="rect4424-3-2-9-7-3-3-5-3"
+       width="112.49998"
+       height="112.50001"
+       x="262.5"
+       y="471.11218"
+       rx="0"
+       ry="0" />
+    <path
+       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968767;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 112.50002,639.86223 c 712.50002,0 712.50002,0 712.50002,0"
+       id="path4655-9-3-65-5-6"
+       inkscape:connector-curvature="0" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="318.59131"
+       y="520.83752"
+       id="text4349-26"><tspan
+         sodipodi:role="line"
+         x="318.59131"
+         y="520.83752"
+         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+         id="tspan1273-8">I2C</tspan><tspan
+         sodipodi:role="line"
+         x="318.59131"
+         y="552.08752"
+         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+         id="tspan1287">Slave</tspan></text>
+    <path
+       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968767;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 112.49995,677.36223 c 712.50005,0 712.50005,0 712.50005,0"
+       id="path4655-9-3-65-5-6-2"
+       inkscape:connector-curvature="0" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="861.07312"
+       y="687.03937"
+       id="text4349-7"><tspan
+         sodipodi:role="line"
+         x="861.07312"
+         y="687.03937"
+         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;writing-mode:lr-tb;direction:ltr;text-anchor:middle;stroke-width:1px"
+         id="tspan1285-9">SCL</tspan></text>
+    <flowRoot
+       xml:space="preserve"
+       id="flowRoot1627"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:Sans;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"><flowRegion
+         id="flowRegion1629"><rect
+           id="rect1631"
+           width="220"
+           height="120"
+           x="140"
+           y="-126.29921" /></flowRegion><flowPara
+         id="flowPara1633" /></flowRoot>    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="863.31921"
+       y="648.96735"
+       id="text4349-7-3"><tspan
+         sodipodi:role="line"
+         x="863.31921"
+         y="648.96735"
+         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+         id="tspan1285-9-6">SDA</tspan></text>
+    <rect
+       style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
+       id="rect4424-3-2-9-7-3-3-5-3-0"
+       width="112.49998"
+       height="112.50002"
+       x="412.5"
+       y="471.11215"
+       rx="0"
+       ry="0" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="468.59131"
+       y="520.83746"
+       id="text4349-26-6"><tspan
+         sodipodi:role="line"
+         x="468.59131"
+         y="520.83746"
+         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+         id="tspan1273-8-2">I2C</tspan><tspan
+         sodipodi:role="line"
+         x="468.59131"
+         y="552.08746"
+         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+         id="tspan1287-6">Slave</tspan></text>
+    <rect
+       style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
+       id="rect4424-3-2-9-7-3-3-5-3-1"
+       width="112.49998"
+       height="112.50002"
+       x="562.5"
+       y="471.11215"
+       rx="0"
+       ry="0" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="618.59131"
+       y="520.83746"
+       id="text4349-26-8"><tspan
+         sodipodi:role="line"
+         x="618.59131"
+         y="520.83746"
+         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+         id="tspan1273-8-7">I2C</tspan><tspan
+         sodipodi:role="line"
+         x="618.59131"
+         y="552.08746"
+         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+         id="tspan1287-9">Slave</tspan></text>
+    <path
+       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM)"
+       d="m 150,583.61221 v 93.75"
+       id="path4655-9-3-65-5-6-20"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cc" />
+    <path
+       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713)"
+       d="m 187.5,583.61221 v 56.25"
+       id="path4655-9-3-65-5-6-20-2"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cc" />
+    <path
+       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM-2)"
+       d="m 300,583.61221 v 93.75"
+       id="path4655-9-3-65-5-6-20-9"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cc" />
+    <path
+       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713-9)"
+       d="m 337.5,583.61221 v 56.25"
+       id="path4655-9-3-65-5-6-20-2-7"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cc" />
+    <path
+       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM-1)"
+       d="m 450,583.61221 v 93.75"
+       id="path4655-9-3-65-5-6-20-93"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cc" />
+    <path
+       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713-3)"
+       d="m 487.5,583.61221 v 56.25"
+       id="path4655-9-3-65-5-6-20-2-1"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cc" />
+    <path
+       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM-8)"
+       d="m 600,583.61221 v 93.75"
+       id="path4655-9-3-65-5-6-20-5"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cc" />
+    <path
+       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713-94)"
+       d="m 637.5,583.61221 v 56.25"
+       id="path4655-9-3-65-5-6-20-2-0"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cc" />
+    <path
+       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-start:url(#marker6165);marker-end:url(#marker6165)"
+       d="m 750,471.11221 v 28.125 l 9.375,9.375 -18.74999,18.75 18.74999,18.75 -18.74999,18.75 18.74999,18.75 -9.375,9.375 v 28.125 0 0 56.25"
+       id="path6135"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccccccccccc" />
+    <path
+       style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-start:url(#marker8861);marker-end:url(#marker6165-5)"
+       d="m 787.49999,471.11221 v 28.125 l 9.375,9.375 -18.74999,18.75 18.74999,18.75 -18.74999,18.75 18.74999,18.75 -9.375,9.375 v 28.125 0 0 18.75001"
+       id="path6135-4"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccccccccccc" />
+    <path
+       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968719;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 712.5,471.11221 c 112.49999,0 112.49999,0 112.49999,0"
+       id="path4655-9-3-65-5-6-7"
+       inkscape:connector-curvature="0" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="859.94275"
+       y="480.03558"
+       id="text4349-7-3-6"><tspan
+         sodipodi:role="line"
+         x="859.94275"
+         y="480.03558"
+         style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+         id="tspan1285-9-6-5">V<tspan
+   style="font-size:64.99999762%;baseline-shift:sub"
+   id="tspan9307">DD</tspan></tspan></text>
+  </g>
+</svg>
diff --git a/Documentation/i2c/summary.rst b/Documentation/i2c/summary.rst
index ce7230025b33..136c4e333be7 100644
--- a/Documentation/i2c/summary.rst
+++ b/Documentation/i2c/summary.rst
@@ -34,7 +34,7 @@ Terminology
 Using the terminology from the official documentation, the I2C bus connects
 one or more *master* chips and one or more *slave* chips.
 
-.. kernel-figure::  i2c.svg
+.. kernel-figure::  i2c_bus.svg
    :alt:    Simple I2C bus with one master and 3 slaves
 
    Simple I2C bus
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 9599c0f3eea8..af2b87afebc8 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -109,7 +109,6 @@ needed).
    isdn/index
    infiniband/index
    leds/index
-   media/index
    netlabel/index
    networking/index
    pcmcia/index
diff --git a/Documentation/litmus-tests/README b/Documentation/litmus-tests/README
new file mode 100644
index 000000000000..79d187f75679
--- /dev/null
+++ b/Documentation/litmus-tests/README
@@ -0,0 +1,14 @@
+============
+LITMUS TESTS
+============
+
+RCU (/rcu directory)
+--------------------
+MP+onceassign+derefonce.litmus
+    Demonstrates that rcu_assign_pointer() and rcu_dereference() to
+    ensure that an RCU reader will not see pre-initialization garbage.
+
+RCU+sync+read.litmus
+RCU+sync+free.litmus
+    Both the above litmus tests demonstrate the RCU grace period guarantee
+    that an RCU read-side critical section can never span a grace period.
diff --git a/Documentation/litmus-tests/atomic/Atomic-RMW+mb__after_atomic-is-stronger-than-acquire.litmus b/Documentation/litmus-tests/atomic/Atomic-RMW+mb__after_atomic-is-stronger-than-acquire.litmus
new file mode 100644
index 000000000000..9a8e31a44b28
--- /dev/null
+++ b/Documentation/litmus-tests/atomic/Atomic-RMW+mb__after_atomic-is-stronger-than-acquire.litmus
@@ -0,0 +1,32 @@
+C Atomic-RMW+mb__after_atomic-is-stronger-than-acquire
+
+(*
+ * Result: Never
+ *
+ * Test that an atomic RMW followed by a smp_mb__after_atomic() is
+ * stronger than a normal acquire: both the read and write parts of
+ * the RMW are ordered before the subsequential memory accesses.
+ *)
+
+{
+}
+
+P0(int *x, atomic_t *y)
+{
+	int r0;
+	int r1;
+
+	r0 = READ_ONCE(*x);
+	smp_rmb();
+	r1 = atomic_read(y);
+}
+
+P1(int *x, atomic_t *y)
+{
+	atomic_inc(y);
+	smp_mb__after_atomic();
+	WRITE_ONCE(*x, 1);
+}
+
+exists
+(0:r0=1 /\ 0:r1=0)
diff --git a/Documentation/litmus-tests/atomic/Atomic-RMW-ops-are-atomic-WRT-atomic_set.litmus b/Documentation/litmus-tests/atomic/Atomic-RMW-ops-are-atomic-WRT-atomic_set.litmus
new file mode 100644
index 000000000000..49385314d911
--- /dev/null
+++ b/Documentation/litmus-tests/atomic/Atomic-RMW-ops-are-atomic-WRT-atomic_set.litmus
@@ -0,0 +1,24 @@
+C Atomic-RMW-ops-are-atomic-WRT-atomic_set
+
+(*
+ * Result: Never
+ *
+ * Test that atomic_set() cannot break the atomicity of atomic RMWs.
+ *)
+
+{
+	atomic_t v = ATOMIC_INIT(1);
+}
+
+P0(atomic_t *v)
+{
+	(void)atomic_add_unless(v, 1, 0);
+}
+
+P1(atomic_t *v)
+{
+	atomic_set(v, 0);
+}
+
+exists
+(v=2)
diff --git a/Documentation/litmus-tests/atomic/README b/Documentation/litmus-tests/atomic/README
new file mode 100644
index 000000000000..714cf93816ea
--- /dev/null
+++ b/Documentation/litmus-tests/atomic/README
@@ -0,0 +1,16 @@
+This directory contains litmus tests that are typical to describe the semantics
+of our atomic APIs. For more information about how to "run" a litmus test or
+how to generate a kernel test module based on a litmus test, please see
+tools/memory-model/README.
+
+============
+LITMUS TESTS
+============
+
+Atomic-RMW+mb__after_atomic-is-stronger-than-acquire
+	Test that an atomic RMW followed by a smp_mb__after_atomic() is
+	stronger than a normal acquire: both the read and write parts of
+	the RMW are ordered before the subsequential memory accesses.
+
+Atomic-RMW-ops-are-atomic-WRT-atomic_set.litmus
+	Test that atomic_set() cannot break the atomicity of atomic RMWs.
diff --git a/Documentation/litmus-tests/rcu/MP+onceassign+derefonce.litmus b/Documentation/litmus-tests/rcu/MP+onceassign+derefonce.litmus
new file mode 100644
index 000000000000..97731b4bbdd8
--- /dev/null
+++ b/Documentation/litmus-tests/rcu/MP+onceassign+derefonce.litmus
@@ -0,0 +1,34 @@
+C MP+onceassign+derefonce
+
+(*
+ * Result: Never
+ *
+ * This litmus test demonstrates that rcu_assign_pointer() and
+ * rcu_dereference() suffice to ensure that an RCU reader will not see
+ * pre-initialization garbage when it traverses an RCU-protected data
+ * structure containing a newly inserted element.
+ *)
+
+{
+y=z;
+z=0;
+}
+
+P0(int *x, int **y)
+{
+	WRITE_ONCE(*x, 1);
+	rcu_assign_pointer(*y, x);
+}
+
+P1(int *x, int **y)
+{
+	int *r0;
+	int r1;
+
+	rcu_read_lock();
+	r0 = rcu_dereference(*y);
+	r1 = READ_ONCE(*r0);
+	rcu_read_unlock();
+}
+
+exists (1:r0=x /\ 1:r1=0)
diff --git a/Documentation/litmus-tests/rcu/RCU+sync+free.litmus b/Documentation/litmus-tests/rcu/RCU+sync+free.litmus
new file mode 100644
index 000000000000..4ee67e12f513
--- /dev/null
+++ b/Documentation/litmus-tests/rcu/RCU+sync+free.litmus
@@ -0,0 +1,42 @@
+C RCU+sync+free
+
+(*
+ * Result: Never
+ *
+ * This litmus test demonstrates that an RCU reader can never see a write that
+ * follows a grace period, if it did not see writes that precede that grace
+ * period.
+ *
+ * This is a typical pattern of RCU usage, where the write before the grace
+ * period assigns a pointer, and the writes following the grace period destroy
+ * the object that the pointer used to point to.
+ *
+ * This is one implication of the RCU grace-period guarantee, which says (among
+ * other things) that an RCU read-side critical section cannot span a grace period.
+ *)
+
+{
+int x = 1;
+int *y = &x;
+int z = 1;
+}
+
+P0(int *x, int *z, int **y)
+{
+	int *r0;
+	int r1;
+
+	rcu_read_lock();
+	r0 = rcu_dereference(*y);
+	r1 = READ_ONCE(*r0);
+	rcu_read_unlock();
+}
+
+P1(int *x, int *z, int **y)
+{
+	rcu_assign_pointer(*y, z);
+	synchronize_rcu();
+	WRITE_ONCE(*x, 0);
+}
+
+exists (0:r0=x /\ 0:r1=0)
diff --git a/Documentation/litmus-tests/rcu/RCU+sync+read.litmus b/Documentation/litmus-tests/rcu/RCU+sync+read.litmus
new file mode 100644
index 000000000000..f34176720231
--- /dev/null
+++ b/Documentation/litmus-tests/rcu/RCU+sync+read.litmus
@@ -0,0 +1,37 @@
+C RCU+sync+read
+
+(*
+ * Result: Never
+ *
+ * This litmus test demonstrates that after a grace period, an RCU updater always
+ * sees all stores done in prior RCU read-side critical sections. Such
+ * read-side critical sections would have ended before the grace period ended.
+ *
+ * This is one implication of the RCU grace-period guarantee, which says (among
+ * other things) that an RCU read-side critical section cannot span a grace period.
+ *)
+
+{
+int x = 0;
+int y = 0;
+}
+
+P0(int *x, int *y)
+{
+	rcu_read_lock();
+	WRITE_ONCE(*x, 1);
+	WRITE_ONCE(*y, 1);
+	rcu_read_unlock();
+}
+
+P1(int *x, int *y)
+{
+	int r0;
+	int r1;
+
+	r0 = READ_ONCE(*x);
+	synchronize_rcu();
+	r1 = READ_ONCE(*y);
+}
+
+exists (1:r0=1 /\ 1:r1=0)
diff --git a/Documentation/locking/locktorture.rst b/Documentation/locking/locktorture.rst
index 5bcb99ba7bd9..0b4bbe378bf1 100644
--- a/Documentation/locking/locktorture.rst
+++ b/Documentation/locking/locktorture.rst
@@ -166,4 +166,4 @@ checked for such errors.  The "rmmod" command forces a "SUCCESS",
 two are self-explanatory, while the last indicates that while there
 were no locking failures, CPU-hotplug problems were detected.
 
-Also see: Documentation/RCU/torture.txt
+Also see: Documentation/RCU/torture.rst
diff --git a/Documentation/media/.gitignore b/Documentation/media/.gitignore
deleted file mode 100644
index 53adc029061f..000000000000
--- a/Documentation/media/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-*.pdf
-# Files generated from *.dot
-uapi/v4l/pipeline.svg
diff --git a/Documentation/media/Makefile b/Documentation/media/Makefile
deleted file mode 100644
index d75d70f191bc..000000000000
--- a/Documentation/media/Makefile
+++ /dev/null
@@ -1,69 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Rules to convert a .h file to inline RST documentation
-
-SRC_DIR=$(srctree)/Documentation/media
-PARSER = $(srctree)/Documentation/sphinx/parse-headers.pl
-UAPI = $(srctree)/include/uapi/linux
-KAPI = $(srctree)/include/linux
-
-FILES = audio.h.rst ca.h.rst dmx.h.rst frontend.h.rst net.h.rst video.h.rst \
-	  videodev2.h.rst media.h.rst cec.h.rst lirc.h.rst
-
-TARGETS := $(addprefix $(BUILDDIR)/, $(FILES))
-
-gen_rst = \
-	echo ${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions; \
-	${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions
-
-quiet_gen_rst = echo '  PARSE   $(patsubst $(srctree)/%,%,$<)'; \
-	${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions
-
-silent_gen_rst = ${gen_rst}
-
-$(BUILDDIR)/audio.h.rst: ${UAPI}/dvb/audio.h ${PARSER} $(SRC_DIR)/audio.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-$(BUILDDIR)/ca.h.rst: ${UAPI}/dvb/ca.h ${PARSER} $(SRC_DIR)/ca.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-$(BUILDDIR)/dmx.h.rst: ${UAPI}/dvb/dmx.h ${PARSER} $(SRC_DIR)/dmx.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-$(BUILDDIR)/frontend.h.rst: ${UAPI}/dvb/frontend.h ${PARSER} $(SRC_DIR)/frontend.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-$(BUILDDIR)/net.h.rst: ${UAPI}/dvb/net.h ${PARSER} $(SRC_DIR)/net.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-$(BUILDDIR)/video.h.rst: ${UAPI}/dvb/video.h ${PARSER} $(SRC_DIR)/video.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-$(BUILDDIR)/videodev2.h.rst: ${UAPI}/videodev2.h ${PARSER} $(SRC_DIR)/videodev2.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-$(BUILDDIR)/media.h.rst: ${UAPI}/media.h ${PARSER} $(SRC_DIR)/media.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-$(BUILDDIR)/cec.h.rst: ${UAPI}/cec.h ${PARSER} $(SRC_DIR)/cec.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-$(BUILDDIR)/lirc.h.rst: ${UAPI}/lirc.h ${PARSER} $(SRC_DIR)/lirc.h.rst.exceptions
-	@$($(quiet)gen_rst)
-
-# Media build rules
-
-.PHONY: all html epub xml latex
-
-all: $(IMGDOT) $(BUILDDIR) ${TARGETS}
-html: all
-epub: all
-xml: all
-latex: $(IMGPDF) all
-linkcheck:
-
-clean:
-	-rm -f $(DOTTGT) $(IMGTGT) ${TARGETS} 2>/dev/null
-
-$(BUILDDIR):
-	$(Q)mkdir -p $@
diff --git a/Documentation/media/audio.h.rst.exceptions b/Documentation/media/audio.h.rst.exceptions
deleted file mode 100644
index cf6620477f73..000000000000
--- a/Documentation/media/audio.h.rst.exceptions
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define _DVBAUDIO_H_
-
-# Undocumented audio caps, as this is a deprecated API anyway
-ignore define AUDIO_CAP_DTS
-ignore define AUDIO_CAP_LPCM
-ignore define AUDIO_CAP_MP1
-ignore define AUDIO_CAP_MP2
-ignore define AUDIO_CAP_MP3
-ignore define AUDIO_CAP_AAC
-ignore define AUDIO_CAP_OGG
-ignore define AUDIO_CAP_SDDS
-ignore define AUDIO_CAP_AC3
-
-# some typedefs should point to struct/enums
-replace typedef audio_mixer_t :c:type:`audio_mixer`
-replace typedef audio_status_t :c:type:`audio_status`
diff --git a/Documentation/media/ca.h.rst.exceptions b/Documentation/media/ca.h.rst.exceptions
deleted file mode 100644
index f6828238eb48..000000000000
--- a/Documentation/media/ca.h.rst.exceptions
+++ /dev/null
@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define _DVBCA_H_
-
-# struct ca_slot_info defines
-replace define CA_CI :c:type:`ca_slot_info`
-replace define CA_CI_LINK :c:type:`ca_slot_info`
-replace define CA_CI_PHYS :c:type:`ca_slot_info`
-replace define CA_DESCR :c:type:`ca_slot_info`
-replace define CA_SC :c:type:`ca_slot_info`
-replace define CA_CI_MODULE_PRESENT :c:type:`ca_slot_info`
-replace define CA_CI_MODULE_READY :c:type:`ca_slot_info`
-
-# struct ca_descr_info defines
-replace define CA_ECD :c:type:`ca_descr_info`
-replace define CA_NDS :c:type:`ca_descr_info`
-replace define CA_DSS :c:type:`ca_descr_info`
-
-# some typedefs should point to struct/enums
-replace typedef ca_slot_info_t :c:type:`ca_slot_info`
-replace typedef ca_descr_info_t :c:type:`ca_descr_info`
-replace typedef ca_caps_t :c:type:`ca_caps`
-replace typedef ca_msg_t :c:type:`ca_msg`
-replace typedef ca_descr_t :c:type:`ca_descr`
diff --git a/Documentation/media/cec-drivers/index.rst b/Documentation/media/cec-drivers/index.rst
deleted file mode 100644
index 2b7fcaa4311b..000000000000
--- a/Documentation/media/cec-drivers/index.rst
+++ /dev/null
@@ -1,34 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-.. _cec-drivers:
-
-#################################
-CEC driver-specific documentation
-#################################
-
-**Copyright** |copy| 2017 : LinuxTV Developers
-
-This documentation is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation version 2 of the License.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-more details.
-
-For more details see the file COPYING in the source distribution of Linux.
-
-.. only:: html
-
-    .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-	:maxdepth: 5
-	:numbered:
-
-	pulse8-cec
diff --git a/Documentation/media/cec-drivers/pulse8-cec.rst b/Documentation/media/cec-drivers/pulse8-cec.rst
deleted file mode 100644
index 356d08b519f3..000000000000
--- a/Documentation/media/cec-drivers/pulse8-cec.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Pulse-Eight CEC Adapter driver
-==============================
-
-The pulse8-cec driver implements the following module option:
-
-``persistent_config``
----------------------
-
-By default this is off, but when set to 1 the driver will store the current
-settings to the device's internal eeprom and restore it the next time the
-device is connected to the USB port.
diff --git a/Documentation/media/cec.h.rst.exceptions b/Documentation/media/cec.h.rst.exceptions
deleted file mode 100644
index d83790ccac8e..000000000000
--- a/Documentation/media/cec.h.rst.exceptions
+++ /dev/null
@@ -1,575 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define _CEC_UAPI_H
-
-# define macros to ignore
-
-ignore define CEC_MAX_MSG_SIZE
-ignore define CEC_MAX_LOG_ADDRS
-
-ignore define CEC_LOG_ADDR_MASK_TV
-ignore define CEC_LOG_ADDR_MASK_RECORD
-ignore define CEC_LOG_ADDR_MASK_TUNER
-ignore define CEC_LOG_ADDR_MASK_PLAYBACK
-ignore define CEC_LOG_ADDR_MASK_AUDIOSYSTEM
-ignore define CEC_LOG_ADDR_MASK_BACKUP
-ignore define CEC_LOG_ADDR_MASK_SPECIFIC
-ignore define CEC_LOG_ADDR_MASK_UNREGISTERED
-
-# Shouldn't them be documented?
-ignore define CEC_LOG_ADDR_INVALID
-ignore define CEC_PHYS_ADDR_INVALID
-
-ignore define CEC_VENDOR_ID_NONE
-
-ignore define CEC_MODE_INITIATOR_MSK
-ignore define CEC_MODE_FOLLOWER_MSK
-
-# Part of CEC 2.0 spec - shouldn't be documented too?
-ignore define CEC_LOG_ADDR_TV
-ignore define CEC_LOG_ADDR_RECORD_1
-ignore define CEC_LOG_ADDR_RECORD_2
-ignore define CEC_LOG_ADDR_TUNER_1
-ignore define CEC_LOG_ADDR_PLAYBACK_1
-ignore define CEC_LOG_ADDR_AUDIOSYSTEM
-ignore define CEC_LOG_ADDR_TUNER_2
-ignore define CEC_LOG_ADDR_TUNER_3
-ignore define CEC_LOG_ADDR_PLAYBACK_2
-ignore define CEC_LOG_ADDR_RECORD_3
-ignore define CEC_LOG_ADDR_TUNER_4
-ignore define CEC_LOG_ADDR_PLAYBACK_3
-ignore define CEC_LOG_ADDR_BACKUP_1
-ignore define CEC_LOG_ADDR_BACKUP_2
-ignore define CEC_LOG_ADDR_SPECIFIC
-ignore define CEC_LOG_ADDR_UNREGISTERED
-ignore define CEC_LOG_ADDR_BROADCAST
-
-# IMHO, those should also be documented
-
-ignore define CEC_MSG_ACTIVE_SOURCE
-ignore define CEC_MSG_IMAGE_VIEW_ON
-ignore define CEC_MSG_TEXT_VIEW_ON
-
-ignore define CEC_MSG_INACTIVE_SOURCE
-ignore define CEC_MSG_REQUEST_ACTIVE_SOURCE
-ignore define CEC_MSG_ROUTING_CHANGE
-ignore define CEC_MSG_ROUTING_INFORMATION
-ignore define CEC_MSG_SET_STREAM_PATH
-
-ignore define CEC_MSG_STANDBY
-
-ignore define CEC_MSG_RECORD_OFF
-ignore define CEC_MSG_RECORD_ON
-
-ignore define CEC_OP_RECORD_SRC_OWN
-ignore define CEC_OP_RECORD_SRC_DIGITAL
-ignore define CEC_OP_RECORD_SRC_ANALOG
-ignore define CEC_OP_RECORD_SRC_EXT_PLUG
-ignore define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR
-
-ignore define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID
-ignore define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL
-
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2
-ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T
-
-ignore define CEC_OP_ANA_BCAST_TYPE_CABLE
-ignore define CEC_OP_ANA_BCAST_TYPE_SATELLITE
-ignore define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL
-
-ignore define CEC_OP_BCAST_SYSTEM_PAL_BG
-ignore define CEC_OP_BCAST_SYSTEM_SECAM_LQ
-ignore define CEC_OP_BCAST_SYSTEM_PAL_M
-ignore define CEC_OP_BCAST_SYSTEM_NTSC_M
-ignore define CEC_OP_BCAST_SYSTEM_PAL_I
-ignore define CEC_OP_BCAST_SYSTEM_SECAM_DK
-ignore define CEC_OP_BCAST_SYSTEM_SECAM_BG
-ignore define CEC_OP_BCAST_SYSTEM_SECAM_L
-ignore define CEC_OP_BCAST_SYSTEM_PAL_DK
-ignore define CEC_OP_BCAST_SYSTEM_OTHER
-
-ignore define CEC_OP_CHANNEL_NUMBER_FMT_1_PART
-ignore define CEC_OP_CHANNEL_NUMBER_FMT_2_PART
-
-ignore define CEC_MSG_RECORD_STATUS
-
-ignore define CEC_OP_RECORD_STATUS_CUR_SRC
-ignore define CEC_OP_RECORD_STATUS_DIG_SERVICE
-ignore define CEC_OP_RECORD_STATUS_ANA_SERVICE
-ignore define CEC_OP_RECORD_STATUS_EXT_INPUT
-ignore define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE
-ignore define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE
-ignore define CEC_OP_RECORD_STATUS_NO_SERVICE
-ignore define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG
-ignore define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR
-ignore define CEC_OP_RECORD_STATUS_UNSUP_CA
-ignore define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS
-ignore define CEC_OP_RECORD_STATUS_CANT_COPY_SRC
-ignore define CEC_OP_RECORD_STATUS_NO_MORE_COPIES
-ignore define CEC_OP_RECORD_STATUS_NO_MEDIA
-ignore define CEC_OP_RECORD_STATUS_PLAYING
-ignore define CEC_OP_RECORD_STATUS_ALREADY_RECORDING
-ignore define CEC_OP_RECORD_STATUS_MEDIA_PROT
-ignore define CEC_OP_RECORD_STATUS_NO_SIGNAL
-ignore define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM
-ignore define CEC_OP_RECORD_STATUS_NO_SPACE
-ignore define CEC_OP_RECORD_STATUS_PARENTAL_LOCK
-ignore define CEC_OP_RECORD_STATUS_TERMINATED_OK
-ignore define CEC_OP_RECORD_STATUS_ALREADY_TERM
-ignore define CEC_OP_RECORD_STATUS_OTHER
-
-ignore define CEC_MSG_RECORD_TV_SCREEN
-
-ignore define CEC_MSG_CLEAR_ANALOGUE_TIMER
-
-ignore define CEC_OP_REC_SEQ_SUNDAY
-ignore define CEC_OP_REC_SEQ_MONDAY
-ignore define CEC_OP_REC_SEQ_TUESDAY
-ignore define CEC_OP_REC_SEQ_WEDNESDAY
-ignore define CEC_OP_REC_SEQ_THURSDAY
-ignore define CEC_OP_REC_SEQ_FRIDAY
-ignore define CEC_OP_REC_SEQ_SATERDAY
-ignore define CEC_OP_REC_SEQ_ONCE_ONLY
-
-ignore define CEC_MSG_CLEAR_DIGITAL_TIMER
-
-ignore define CEC_MSG_CLEAR_EXT_TIMER
-
-ignore define CEC_OP_EXT_SRC_PLUG
-ignore define CEC_OP_EXT_SRC_PHYS_ADDR
-
-ignore define CEC_MSG_SET_ANALOGUE_TIMER
-ignore define CEC_MSG_SET_DIGITAL_TIMER
-ignore define CEC_MSG_SET_EXT_TIMER
-
-ignore define CEC_MSG_SET_TIMER_PROGRAM_TITLE
-ignore define CEC_MSG_TIMER_CLEARED_STATUS
-
-ignore define CEC_OP_TIMER_CLR_STAT_RECORDING
-ignore define CEC_OP_TIMER_CLR_STAT_NO_MATCHING
-ignore define CEC_OP_TIMER_CLR_STAT_NO_INFO
-ignore define CEC_OP_TIMER_CLR_STAT_CLEARED
-
-ignore define CEC_MSG_TIMER_STATUS
-
-ignore define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP
-ignore define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP
-
-ignore define CEC_OP_MEDIA_INFO_UNPROT_MEDIA
-ignore define CEC_OP_MEDIA_INFO_PROT_MEDIA
-ignore define CEC_OP_MEDIA_INFO_NO_MEDIA
-
-ignore define CEC_OP_PROG_IND_NOT_PROGRAMMED
-ignore define CEC_OP_PROG_IND_PROGRAMMED
-
-ignore define CEC_OP_PROG_INFO_ENOUGH_SPACE
-ignore define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE
-ignore define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE
-ignore define CEC_OP_PROG_INFO_NONE_AVAILABLE
-
-ignore define CEC_OP_PROG_ERROR_NO_FREE_TIMER
-ignore define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE
-ignore define CEC_OP_PROG_ERROR_REC_SEQ_ERROR
-ignore define CEC_OP_PROG_ERROR_INV_EXT_PLUG
-ignore define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR
-ignore define CEC_OP_PROG_ERROR_CA_UNSUPP
-ignore define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS
-ignore define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP
-ignore define CEC_OP_PROG_ERROR_PARENTAL_LOCK
-ignore define CEC_OP_PROG_ERROR_CLOCK_FAILURE
-ignore define CEC_OP_PROG_ERROR_DUPLICATE
-
-ignore define CEC_MSG_CEC_VERSION
-
-ignore define CEC_OP_CEC_VERSION_1_3A
-ignore define CEC_OP_CEC_VERSION_1_4
-ignore define CEC_OP_CEC_VERSION_2_0
-
-ignore define CEC_MSG_GET_CEC_VERSION
-ignore define CEC_MSG_GIVE_PHYSICAL_ADDR
-ignore define CEC_MSG_GET_MENU_LANGUAGE
-ignore define CEC_MSG_REPORT_PHYSICAL_ADDR
-
-ignore define CEC_OP_PRIM_DEVTYPE_TV
-ignore define CEC_OP_PRIM_DEVTYPE_RECORD
-ignore define CEC_OP_PRIM_DEVTYPE_TUNER
-ignore define CEC_OP_PRIM_DEVTYPE_PLAYBACK
-ignore define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM
-ignore define CEC_OP_PRIM_DEVTYPE_SWITCH
-ignore define CEC_OP_PRIM_DEVTYPE_PROCESSOR
-
-ignore define CEC_MSG_SET_MENU_LANGUAGE
-ignore define CEC_MSG_REPORT_FEATURES
-
-ignore define CEC_OP_ALL_DEVTYPE_TV
-ignore define CEC_OP_ALL_DEVTYPE_RECORD
-ignore define CEC_OP_ALL_DEVTYPE_TUNER
-ignore define CEC_OP_ALL_DEVTYPE_PLAYBACK
-ignore define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM
-ignore define CEC_OP_ALL_DEVTYPE_SWITCH
-
-ignore define CEC_OP_FEAT_EXT
-
-ignore define CEC_OP_FEAT_RC_TV_PROFILE_NONE
-ignore define CEC_OP_FEAT_RC_TV_PROFILE_1
-ignore define CEC_OP_FEAT_RC_TV_PROFILE_2
-ignore define CEC_OP_FEAT_RC_TV_PROFILE_3
-ignore define CEC_OP_FEAT_RC_TV_PROFILE_4
-ignore define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU
-ignore define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU
-ignore define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU
-ignore define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU
-ignore define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU
-
-ignore define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN
-ignore define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING
-ignore define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL
-ignore define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE
-ignore define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX
-ignore define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX
-
-ignore define CEC_MSG_GIVE_FEATURES
-
-ignore define CEC_MSG_DECK_CONTROL
-
-ignore define CEC_OP_DECK_CTL_MODE_SKIP_FWD
-ignore define CEC_OP_DECK_CTL_MODE_SKIP_REV
-ignore define CEC_OP_DECK_CTL_MODE_STOP
-ignore define CEC_OP_DECK_CTL_MODE_EJECT
-
-ignore define CEC_MSG_DECK_STATUS
-
-ignore define CEC_OP_DECK_INFO_PLAY
-ignore define CEC_OP_DECK_INFO_RECORD
-ignore define CEC_OP_DECK_INFO_PLAY_REV
-ignore define CEC_OP_DECK_INFO_STILL
-ignore define CEC_OP_DECK_INFO_SLOW
-ignore define CEC_OP_DECK_INFO_SLOW_REV
-ignore define CEC_OP_DECK_INFO_FAST_FWD
-ignore define CEC_OP_DECK_INFO_FAST_REV
-ignore define CEC_OP_DECK_INFO_NO_MEDIA
-ignore define CEC_OP_DECK_INFO_STOP
-ignore define CEC_OP_DECK_INFO_SKIP_FWD
-ignore define CEC_OP_DECK_INFO_SKIP_REV
-ignore define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD
-ignore define CEC_OP_DECK_INFO_INDEX_SEARCH_REV
-ignore define CEC_OP_DECK_INFO_OTHER
-
-ignore define CEC_MSG_GIVE_DECK_STATUS
-
-ignore define CEC_OP_STATUS_REQ_ON
-ignore define CEC_OP_STATUS_REQ_OFF
-ignore define CEC_OP_STATUS_REQ_ONCE
-
-ignore define CEC_MSG_PLAY
-
-ignore define CEC_OP_PLAY_MODE_PLAY_FWD
-ignore define CEC_OP_PLAY_MODE_PLAY_REV
-ignore define CEC_OP_PLAY_MODE_PLAY_STILL
-ignore define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN
-ignore define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED
-ignore define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX
-ignore define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN
-ignore define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED
-ignore define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX
-ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN
-ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED
-ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX
-ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN
-ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED
-ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX
-
-ignore define CEC_MSG_GIVE_TUNER_DEVICE_STATUS
-ignore define CEC_MSG_SELECT_ANALOGUE_SERVICE
-ignore define CEC_MSG_SELECT_DIGITAL_SERVICE
-ignore define CEC_MSG_TUNER_DEVICE_STATUS
-
-ignore define CEC_OP_REC_FLAG_USED
-ignore define CEC_OP_REC_FLAG_NOT_USED
-
-ignore define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL
-ignore define CEC_OP_TUNER_DISPLAY_INFO_NONE
-ignore define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE
-
-ignore define CEC_MSG_TUNER_STEP_DECREMENT
-ignore define CEC_MSG_TUNER_STEP_INCREMENT
-
-ignore define CEC_MSG_DEVICE_VENDOR_ID
-ignore define CEC_MSG_GIVE_DEVICE_VENDOR_ID
-ignore define CEC_MSG_VENDOR_COMMAND
-ignore define CEC_MSG_VENDOR_COMMAND_WITH_ID
-ignore define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN
-ignore define CEC_MSG_VENDOR_REMOTE_BUTTON_UP
-
-ignore define CEC_MSG_SET_OSD_STRING
-
-ignore define CEC_OP_DISP_CTL_DEFAULT
-ignore define CEC_OP_DISP_CTL_UNTIL_CLEARED
-ignore define CEC_OP_DISP_CTL_CLEAR
-
-ignore define CEC_MSG_GIVE_OSD_NAME
-ignore define CEC_MSG_SET_OSD_NAME
-
-ignore define CEC_MSG_MENU_REQUEST
-
-ignore define CEC_OP_MENU_REQUEST_ACTIVATE
-ignore define CEC_OP_MENU_REQUEST_DEACTIVATE
-ignore define CEC_OP_MENU_REQUEST_QUERY
-
-ignore define CEC_MSG_MENU_STATUS
-
-ignore define CEC_OP_MENU_STATE_ACTIVATED
-ignore define CEC_OP_MENU_STATE_DEACTIVATED
-
-ignore define CEC_MSG_USER_CONTROL_PRESSED
-
-ignore define CEC_OP_UI_CMD_SELECT
-ignore define CEC_OP_UI_CMD_UP
-ignore define CEC_OP_UI_CMD_DOWN
-ignore define CEC_OP_UI_CMD_LEFT
-ignore define CEC_OP_UI_CMD_RIGHT
-ignore define CEC_OP_UI_CMD_RIGHT_UP
-ignore define CEC_OP_UI_CMD_RIGHT_DOWN
-ignore define CEC_OP_UI_CMD_LEFT_UP
-ignore define CEC_OP_UI_CMD_LEFT_DOWN
-ignore define CEC_OP_UI_CMD_DEVICE_ROOT_MENU
-ignore define CEC_OP_UI_CMD_DEVICE_SETUP_MENU
-ignore define CEC_OP_UI_CMD_CONTENTS_MENU
-ignore define CEC_OP_UI_CMD_FAVORITE_MENU
-ignore define CEC_OP_UI_CMD_BACK
-ignore define CEC_OP_UI_CMD_MEDIA_TOP_MENU
-ignore define CEC_OP_UI_CMD_MEDIA_CONTEXT_SENSITIVE_MENU
-ignore define CEC_OP_UI_CMD_NUMBER_ENTRY_MODE
-ignore define CEC_OP_UI_CMD_NUMBER_11
-ignore define CEC_OP_UI_CMD_NUMBER_12
-ignore define CEC_OP_UI_CMD_NUMBER_0_OR_NUMBER_10
-ignore define CEC_OP_UI_CMD_NUMBER_1
-ignore define CEC_OP_UI_CMD_NUMBER_2
-ignore define CEC_OP_UI_CMD_NUMBER_3
-ignore define CEC_OP_UI_CMD_NUMBER_4
-ignore define CEC_OP_UI_CMD_NUMBER_5
-ignore define CEC_OP_UI_CMD_NUMBER_6
-ignore define CEC_OP_UI_CMD_NUMBER_7
-ignore define CEC_OP_UI_CMD_NUMBER_8
-ignore define CEC_OP_UI_CMD_NUMBER_9
-ignore define CEC_OP_UI_CMD_DOT
-ignore define CEC_OP_UI_CMD_ENTER
-ignore define CEC_OP_UI_CMD_CLEAR
-ignore define CEC_OP_UI_CMD_NEXT_FAVORITE
-ignore define CEC_OP_UI_CMD_CHANNEL_UP
-ignore define CEC_OP_UI_CMD_CHANNEL_DOWN
-ignore define CEC_OP_UI_CMD_PREVIOUS_CHANNEL
-ignore define CEC_OP_UI_CMD_SOUND_SELECT
-ignore define CEC_OP_UI_CMD_INPUT_SELECT
-ignore define CEC_OP_UI_CMD_DISPLAY_INFORMATION
-ignore define CEC_OP_UI_CMD_HELP
-ignore define CEC_OP_UI_CMD_PAGE_UP
-ignore define CEC_OP_UI_CMD_PAGE_DOWN
-ignore define CEC_OP_UI_CMD_POWER
-ignore define CEC_OP_UI_CMD_VOLUME_UP
-ignore define CEC_OP_UI_CMD_VOLUME_DOWN
-ignore define CEC_OP_UI_CMD_MUTE
-ignore define CEC_OP_UI_CMD_PLAY
-ignore define CEC_OP_UI_CMD_STOP
-ignore define CEC_OP_UI_CMD_PAUSE
-ignore define CEC_OP_UI_CMD_RECORD
-ignore define CEC_OP_UI_CMD_REWIND
-ignore define CEC_OP_UI_CMD_FAST_FORWARD
-ignore define CEC_OP_UI_CMD_EJECT
-ignore define CEC_OP_UI_CMD_SKIP_FORWARD
-ignore define CEC_OP_UI_CMD_SKIP_BACKWARD
-ignore define CEC_OP_UI_CMD_STOP_RECORD
-ignore define CEC_OP_UI_CMD_PAUSE_RECORD
-ignore define CEC_OP_UI_CMD_ANGLE
-ignore define CEC_OP_UI_CMD_SUB_PICTURE
-ignore define CEC_OP_UI_CMD_VIDEO_ON_DEMAND
-ignore define CEC_OP_UI_CMD_ELECTRONIC_PROGRAM_GUIDE
-ignore define CEC_OP_UI_CMD_TIMER_PROGRAMMING
-ignore define CEC_OP_UI_CMD_INITIAL_CONFIGURATION
-ignore define CEC_OP_UI_CMD_SELECT_BROADCAST_TYPE
-ignore define CEC_OP_UI_CMD_SELECT_SOUND_PRESENTATION
-ignore define CEC_OP_UI_CMD_AUDIO_DESCRIPTION
-ignore define CEC_OP_UI_CMD_INTERNET
-ignore define CEC_OP_UI_CMD_3D_MODE
-ignore define CEC_OP_UI_CMD_PLAY_FUNCTION
-ignore define CEC_OP_UI_CMD_PAUSE_PLAY_FUNCTION
-ignore define CEC_OP_UI_CMD_RECORD_FUNCTION
-ignore define CEC_OP_UI_CMD_PAUSE_RECORD_FUNCTION
-ignore define CEC_OP_UI_CMD_STOP_FUNCTION
-ignore define CEC_OP_UI_CMD_MUTE_FUNCTION
-ignore define CEC_OP_UI_CMD_RESTORE_VOLUME_FUNCTION
-ignore define CEC_OP_UI_CMD_TUNE_FUNCTION
-ignore define CEC_OP_UI_CMD_SELECT_MEDIA_FUNCTION
-ignore define CEC_OP_UI_CMD_SELECT_AV_INPUT_FUNCTION
-ignore define CEC_OP_UI_CMD_SELECT_AUDIO_INPUT_FUNCTION
-ignore define CEC_OP_UI_CMD_POWER_TOGGLE_FUNCTION
-ignore define CEC_OP_UI_CMD_POWER_OFF_FUNCTION
-ignore define CEC_OP_UI_CMD_POWER_ON_FUNCTION
-ignore define CEC_OP_UI_CMD_F1_BLUE
-ignore define CEC_OP_UI_CMD_F2_RED
-ignore define CEC_OP_UI_CMD_F3_GREEN
-ignore define CEC_OP_UI_CMD_F4_YELLOW
-ignore define CEC_OP_UI_CMD_F5
-ignore define CEC_OP_UI_CMD_DATA
-
-ignore define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL
-ignore define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA
-ignore define CEC_OP_UI_BCAST_TYPE_ANALOGUE
-ignore define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T
-ignore define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE
-ignore define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT
-ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL
-ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_T
-ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE
-ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT
-ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT
-ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2
-ignore define CEC_OP_UI_BCAST_TYPE_IP
-
-ignore define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO
-ignore define CEC_OP_UI_SND_PRES_CTL_KARAOKE
-ignore define CEC_OP_UI_SND_PRES_CTL_DOWNMIX
-ignore define CEC_OP_UI_SND_PRES_CTL_REVERB
-ignore define CEC_OP_UI_SND_PRES_CTL_EQUALIZER
-ignore define CEC_OP_UI_SND_PRES_CTL_BASS_UP
-ignore define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL
-ignore define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN
-ignore define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP
-ignore define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL
-ignore define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN
-
-ignore define CEC_MSG_USER_CONTROL_RELEASED
-
-ignore define CEC_MSG_GIVE_DEVICE_POWER_STATUS
-ignore define CEC_MSG_REPORT_POWER_STATUS
-
-ignore define CEC_OP_POWER_STATUS_ON
-ignore define CEC_OP_POWER_STATUS_STANDBY
-ignore define CEC_OP_POWER_STATUS_TO_ON
-ignore define CEC_OP_POWER_STATUS_TO_STANDBY
-
-ignore define CEC_MSG_FEATURE_ABORT
-
-ignore define CEC_OP_ABORT_UNRECOGNIZED_OP
-ignore define CEC_OP_ABORT_INCORRECT_MODE
-ignore define CEC_OP_ABORT_NO_SOURCE
-ignore define CEC_OP_ABORT_INVALID_OP
-ignore define CEC_OP_ABORT_REFUSED
-ignore define CEC_OP_ABORT_UNDETERMINED
-
-ignore define CEC_MSG_ABORT
-
-ignore define CEC_MSG_GIVE_AUDIO_STATUS
-ignore define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS
-ignore define CEC_MSG_REPORT_AUDIO_STATUS
-
-ignore define CEC_OP_AUD_MUTE_STATUS_OFF
-ignore define CEC_OP_AUD_MUTE_STATUS_ON
-
-ignore define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR
-ignore define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR
-ignore define CEC_MSG_SET_SYSTEM_AUDIO_MODE
-
-ignore define CEC_OP_SYS_AUD_STATUS_OFF
-ignore define CEC_OP_SYS_AUD_STATUS_ON
-
-ignore define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST
-ignore define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS
-
-ignore define CEC_OP_AUD_FMT_ID_CEA861
-ignore define CEC_OP_AUD_FMT_ID_CEA861_CXT
-
-ignore define CEC_MSG_SET_AUDIO_RATE
-
-ignore define CEC_OP_AUD_RATE_OFF
-ignore define CEC_OP_AUD_RATE_WIDE_STD
-ignore define CEC_OP_AUD_RATE_WIDE_FAST
-ignore define CEC_OP_AUD_RATE_WIDE_SLOW
-ignore define CEC_OP_AUD_RATE_NARROW_STD
-ignore define CEC_OP_AUD_RATE_NARROW_FAST
-ignore define CEC_OP_AUD_RATE_NARROW_SLOW
-
-ignore define CEC_MSG_INITIATE_ARC
-ignore define CEC_MSG_REPORT_ARC_INITIATED
-ignore define CEC_MSG_REPORT_ARC_TERMINATED
-ignore define CEC_MSG_REQUEST_ARC_INITIATION
-ignore define CEC_MSG_REQUEST_ARC_TERMINATION
-ignore define CEC_MSG_TERMINATE_ARC
-
-ignore define CEC_MSG_REQUEST_CURRENT_LATENCY
-ignore define CEC_MSG_REPORT_CURRENT_LATENCY
-
-ignore define CEC_OP_LOW_LATENCY_MODE_OFF
-ignore define CEC_OP_LOW_LATENCY_MODE_ON
-
-ignore define CEC_OP_AUD_OUT_COMPENSATED_NA
-ignore define CEC_OP_AUD_OUT_COMPENSATED_DELAY
-ignore define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY
-ignore define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY
-
-ignore define CEC_MSG_CDC_MESSAGE
-
-ignore define CEC_MSG_CDC_HEC_INQUIRE_STATE
-ignore define CEC_MSG_CDC_HEC_REPORT_STATE
-
-ignore define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED
-ignore define CEC_OP_HEC_FUNC_STATE_INACTIVE
-ignore define CEC_OP_HEC_FUNC_STATE_ACTIVE
-ignore define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD
-
-ignore define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED
-ignore define CEC_OP_HOST_FUNC_STATE_INACTIVE
-ignore define CEC_OP_HOST_FUNC_STATE_ACTIVE
-
-ignore define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED
-ignore define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE
-ignore define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE
-
-ignore define CEC_OP_CDC_ERROR_CODE_NONE
-ignore define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED
-ignore define CEC_OP_CDC_ERROR_CODE_WRONG_STATE
-ignore define CEC_OP_CDC_ERROR_CODE_OTHER
-
-ignore define CEC_OP_HEC_SUPPORT_NO
-ignore define CEC_OP_HEC_SUPPORT_YES
-
-ignore define CEC_OP_HEC_ACTIVATION_ON
-ignore define CEC_OP_HEC_ACTIVATION_OFF
-
-ignore define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT
-ignore define CEC_MSG_CDC_HEC_SET_STATE
-
-ignore define CEC_OP_HEC_SET_STATE_DEACTIVATE
-ignore define CEC_OP_HEC_SET_STATE_ACTIVATE
-
-ignore define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION
-ignore define CEC_MSG_CDC_HEC_NOTIFY_ALIVE
-ignore define CEC_MSG_CDC_HEC_DISCOVER
-
-ignore define CEC_MSG_CDC_HPD_SET_STATE
-
-ignore define CEC_OP_HPD_STATE_CP_EDID_DISABLE
-ignore define CEC_OP_HPD_STATE_CP_EDID_ENABLE
-ignore define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE
-ignore define CEC_OP_HPD_STATE_EDID_DISABLE
-ignore define CEC_OP_HPD_STATE_EDID_ENABLE
-ignore define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE
-ignore define CEC_MSG_CDC_HPD_REPORT_STATE
-
-ignore define CEC_OP_HPD_ERROR_NONE
-ignore define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE
-ignore define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE
-ignore define CEC_OP_HPD_ERROR_OTHER
-ignore define CEC_OP_HPD_ERROR_NONE_NO_VIDEO
diff --git a/Documentation/media/conf_nitpick.py b/Documentation/media/conf_nitpick.py
deleted file mode 100644
index d0c50d75f518..000000000000
--- a/Documentation/media/conf_nitpick.py
+++ /dev/null
@@ -1,111 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-# SPDX-License-Identifier: GPL-2.0
-
-project = 'Linux Media Subsystem Documentation'
-
-# It is possible to run Sphinx in nickpick mode with:
-nitpicky = True
-
-# within nit-picking build, do not refer to any intersphinx object
-intersphinx_mapping = {}
-
-# In nickpick mode, it will complain about lots of missing references that
-#
-# 1) are just typedefs like: bool, __u32, etc;
-# 2) It will complain for things like: enum, NULL;
-# 3) It will complain for symbols that should be on different
-#    books (but currently aren't ported to ReST)
-#
-# The list below has a list of such symbols to be ignored in nitpick mode
-#
-nitpick_ignore = [
-    ("c:func", "clock_gettime"),
-    ("c:func", "close"),
-    ("c:func", "container_of"),
-    ("c:func", "copy_from_user"),
-    ("c:func", "copy_to_user"),
-    ("c:func", "determine_valid_ioctls"),
-    ("c:func", "ERR_PTR"),
-    ("c:func", "i2c_new_device"),
-    ("c:func", "ioctl"),
-    ("c:func", "IS_ERR"),
-    ("c:func", "KERNEL_VERSION"),
-    ("c:func", "mmap"),
-    ("c:func", "open"),
-    ("c:func", "pci_name"),
-    ("c:func", "poll"),
-    ("c:func", "PTR_ERR"),
-    ("c:func", "read"),
-    ("c:func", "release"),
-    ("c:func", "set"),
-    ("c:func", "struct fd_set"),
-    ("c:func", "struct pollfd"),
-    ("c:func", "usb_make_path"),
-    ("c:func", "wait_finish"),
-    ("c:func", "wait_prepare"),
-    ("c:func", "write"),
-
-    ("c:type", "atomic_t"),
-    ("c:type", "bool"),
-    ("c:type", "boolean"),
-    ("c:type", "buf_queue"),
-    ("c:type", "device"),
-    ("c:type", "device_driver"),
-    ("c:type", "device_node"),
-    ("c:type", "enum"),
-    ("c:type", "fd"),
-    ("c:type", "fd_set"),
-    ("c:type", "file"),
-    ("c:type", "i2c_adapter"),
-    ("c:type", "i2c_board_info"),
-    ("c:type", "i2c_client"),
-    ("c:type", "int16_t"),
-    ("c:type", "ktime_t"),
-    ("c:type", "led_classdev_flash"),
-    ("c:type", "list_head"),
-    ("c:type", "lock_class_key"),
-    ("c:type", "module"),
-    ("c:type", "mutex"),
-    ("c:type", "NULL"),
-    ("c:type", "off_t"),
-    ("c:type", "pci_dev"),
-    ("c:type", "pdvbdev"),
-    ("c:type", "poll_table"),
-    ("c:type", "platform_device"),
-    ("c:type", "pollfd"),
-    ("c:type", "poll_table_struct"),
-    ("c:type", "s32"),
-    ("c:type", "s64"),
-    ("c:type", "sd"),
-    ("c:type", "size_t"),
-    ("c:type", "spi_board_info"),
-    ("c:type", "spi_device"),
-    ("c:type", "spi_master"),
-    ("c:type", "ssize_t"),
-    ("c:type", "fb_fix_screeninfo"),
-    ("c:type", "pollfd"),
-    ("c:type", "timeval"),
-    ("c:type", "video_capability"),
-    ("c:type", "timeval"),
-    ("c:type", "__u16"),
-    ("c:type", "u16"),
-    ("c:type", "__u32"),
-    ("c:type", "u32"),
-    ("c:type", "__u64"),
-    ("c:type", "u64"),
-    ("c:type", "u8"),
-    ("c:type", "uint16_t"),
-    ("c:type", "uint32_t"),
-    ("c:type", "union"),
-    ("c:type", "__user"),
-    ("c:type", "usb_device"),
-    ("c:type", "usb_interface"),
-    ("c:type", "v4l2_std_id"),
-    ("c:type", "video_system_t"),
-    ("c:type", "vm_area_struct"),
-
-    # Opaque structures
-
-    ("c:type", "v4l2_m2m_dev"),
-]
diff --git a/Documentation/media/dmx.h.rst.exceptions b/Documentation/media/dmx.h.rst.exceptions
deleted file mode 100644
index afc14d384b83..000000000000
--- a/Documentation/media/dmx.h.rst.exceptions
+++ /dev/null
@@ -1,66 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define _UAPI_DVBDMX_H_
-
-# Ignore limit constants
-ignore define DMX_FILTER_SIZE
-
-# dmx_pes_type_t enum symbols
-replace enum dmx_ts_pes :c:type:`dmx_pes_type`
-replace symbol DMX_PES_AUDIO0 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_VIDEO0 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_TELETEXT0 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_SUBTITLE0 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_PCR0 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_AUDIO1 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_VIDEO1 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_TELETEXT1 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_SUBTITLE1 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_PCR1 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_AUDIO2 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_VIDEO2 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_TELETEXT2 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_SUBTITLE2 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_PCR2 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_AUDIO3 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_VIDEO3 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_TELETEXT3 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_SUBTITLE3 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_PCR3 :c:type:`dmx_pes_type`
-replace symbol DMX_PES_OTHER :c:type:`dmx_pes_type`
-
-# Ignore obsolete symbols
-ignore define DMX_PES_AUDIO
-ignore define DMX_PES_VIDEO
-ignore define DMX_PES_TELETEXT
-ignore define DMX_PES_SUBTITLE
-ignore define DMX_PES_PCR
-
-# dmx_input_t symbols
-replace enum dmx_input :c:type:`dmx_input`
-replace symbol DMX_IN_FRONTEND :c:type:`dmx_input`
-replace symbol DMX_IN_DVR :c:type:`dmx_input`
-
-# Flags for struct dmx_sct_filter_params
-replace define DMX_CHECK_CRC :c:type:`dmx_sct_filter_params`
-replace define DMX_ONESHOT :c:type:`dmx_sct_filter_params`
-replace define DMX_IMMEDIATE_START :c:type:`dmx_sct_filter_params`
-
-# some typedefs should point to struct/enums
-replace typedef dmx_filter_t :c:type:`dmx_filter`
-replace typedef dmx_pes_type_t :c:type:`dmx_pes_type`
-replace typedef dmx_input_t :c:type:`dmx_input`
-
-replace symbol DMX_BUFFER_FLAG_HAD_CRC32_DISCARD :c:type:`dmx_buffer_flags`
-replace	symbol DMX_BUFFER_FLAG_TEI :c:type:`dmx_buffer_flags`
-replace	symbol DMX_BUFFER_PKT_COUNTER_MISMATCH :c:type:`dmx_buffer_flags`
-replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED :c:type:`dmx_buffer_flags`
-replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_INDICATOR :c:type:`dmx_buffer_flags`
-
-replace symbol DMX_OUT_DECODER :c:type:`dmx_output`
-replace symbol DMX_OUT_TAP :c:type:`dmx_output`
-replace symbol DMX_OUT_TS_TAP :c:type:`dmx_output`
-replace symbol DMX_OUT_TSDEMUX_TAP :c:type:`dmx_output`
-
-replace ioctl DMX_DQBUF dmx_qbuf
diff --git a/Documentation/media/dvb-drivers/avermedia.rst b/Documentation/media/dvb-drivers/avermedia.rst
deleted file mode 100644
index 14f437ca38d3..000000000000
--- a/Documentation/media/dvb-drivers/avermedia.rst
+++ /dev/null
@@ -1,269 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-HOWTO: Get An Avermedia DVB-T working under Linux
--------------------------------------------------
-
-February 14th 2006
-
-.. note::
-
-   This documentation is outdated. Please check at the DVB wiki
-   at https://linuxtv.org/wiki for more updated info.
-
-   There's a section there specific for Avermedia boards at:
-   https://linuxtv.org/wiki/index.php/AVerMedia
-
-
-Assumptions and Introduction
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-It  is assumed that the reader understands the basic structure
-of  the Linux Kernel DVB drivers and the general principles of
-Digital TV.
-
-One  significant difference between Digital TV and Analogue TV
-that  the  unwary  (like  myself)  should  consider  is  that,
-although  the  component  structure  of budget DVB-T cards are
-substantially  similar  to Analogue TV cards, they function in
-substantially different ways.
-
-The  purpose  of  an  Analogue TV is to receive and display an
-Analogue  Television  signal. An Analogue TV signal (otherwise
-known  as  composite  video)  is  an  analogue  encoding  of a
-sequence  of  image frames (25 per second) rasterised using an
-interlacing   technique.   Interlacing  takes  two  fields  to
-represent  one  frame.  Computers today are at their best when
-dealing  with  digital  signals,  not  analogue  signals and a
-composite  video signal is about as far removed from a digital
-data stream as you can get. Therefore, an Analogue TV card for
-a PC has the following purpose:
-
-* Tune the receiver to receive a broadcast signal
-* demodulate the broadcast signal
-* demultiplex  the  analogue video signal and analogue audio
-  signal. **NOTE:** some countries employ a digital audio signal
-  embedded  within the modulated composite analogue signal -
-  NICAM.)
-* digitize  the analogue video signal and make the resulting
-  datastream available to the data bus.
-
-The  digital  datastream from an Analogue TV card is generated
-by  circuitry on the card and is often presented uncompressed.
-For  a PAL TV signal encoded at a resolution of 768x576 24-bit
-color pixels over 25 frames per second - a fair amount of data
-is  generated and must be processed by the PC before it can be
-displayed  on the video monitor screen. Some Analogue TV cards
-for  PCs  have  onboard  MPEG2  encoders  which permit the raw
-digital  data  stream  to be presented to the PC in an encoded
-and  compressed  form  -  similar  to the form that is used in
-Digital TV.
-
-The  purpose of a simple budget digital TV card (DVB-T,C or S)
-is to simply:
-
-* Tune the received to receive a broadcast signal.
-* Extract  the encoded digital datastream from the broadcast
-  signal.
-* Make  the  encoded digital datastream (MPEG2) available to
-  the data bus.
-
-The  significant  difference between the two is that the tuner
-on  the analogue TV card spits out an Analogue signal, whereas
-the  tuner  on  the  digital  TV  card  spits out a compressed
-encoded   digital   datastream.   As  the  signal  is  already
-digitised,  it  is  trivial  to pass this datastream to the PC
-databus  with  minimal  additional processing and then extract
-the  digital  video  and audio datastreams passing them to the
-appropriate software or hardware for decoding and viewing.
-
-The Avermedia DVB-T
-~~~~~~~~~~~~~~~~~~~
-
-The Avermedia DVB-T is a budget PCI DVB card. It has 3 inputs:
-
-* RF Tuner Input
-* Composite Video Input (RCA Jack)
-* SVIDEO Input (Mini-DIN)
-
-The  RF  Tuner  Input  is the input to the tuner module of the
-card.  The  Tuner  is  otherwise known as the "Frontend" . The
-Frontend of the Avermedia DVB-T is a Microtune 7202D. A timely
-post  to  the  linux-dvb  mailing  list  ascertained  that the
-Microtune  7202D  is  supported  by the sp887x driver which is
-found in the dvb-hw CVS module.
-
-The  DVB-T card is based around the BT878 chip which is a very
-common multimedia bridge and often found on Analogue TV cards.
-There is no on-board MPEG2 decoder, which means that all MPEG2
-decoding  must  be done in software, or if you have one, on an
-MPEG2 hardware decoding card or chipset.
-
-
-Getting the card going
-~~~~~~~~~~~~~~~~~~~~~~
-
-In order to fire up the card, it is necessary to load a number
-of modules from the DVB driver set. Prior to this it will have
-been  necessary to download these drivers from the linuxtv CVS
-server and compile them successfully.
-
-Depending on the card's feature set, the Device Driver API for
-DVB under Linux will expose some of the following device files
-in the /dev tree:
-
-* /dev/dvb/adapter0/audio0
-* /dev/dvb/adapter0/ca0
-* /dev/dvb/adapter0/demux0
-* /dev/dvb/adapter0/dvr0
-* /dev/dvb/adapter0/frontend0
-* /dev/dvb/adapter0/net0
-* /dev/dvb/adapter0/osd0
-* /dev/dvb/adapter0/video0
-
-The  primary  device  nodes that we are interested in (at this
-stage) for the Avermedia DVB-T are:
-
-* /dev/dvb/adapter0/dvr0
-* /dev/dvb/adapter0/frontend0
-
-The dvr0 device node is used to read the MPEG2 Data Stream and
-the frontend0 node is used to tune the frontend tuner module.
-
-At  this  stage,  it  has  not  been  able  to  ascertain  the
-functionality  of the remaining device nodes in respect of the
-Avermedia  DVBT.  However,  full  functionality  in respect of
-tuning,  receiving  and  supplying  the  MPEG2  data stream is
-possible  with the currently available versions of the driver.
-It  may be possible that additional functionality is available
-from  the  card  (i.e.  viewing the additional analogue inputs
-that  the card presents), but this has not been tested yet. If
-I get around to this, I'll update the document with whatever I
-find.
-
-To  power  up  the  card,  load  the  following modules in the
-following order:
-
-* modprobe bttv (normally loaded automatically)
-* modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)
-
-Insertion  of  these  modules  into  the  running  kernel will
-activate the appropriate DVB device nodes. It is then possible
-to start accessing the card with utilities such as scan, tzap,
-dvbstream etc.
-
-The frontend module sp887x.o, requires an external   firmware.
-Please use  the  command "get_dvb_firmware sp887x" to download
-it. Then copy it to /usr/lib/hotplug/firmware or /lib/firmware/
-(depending on configuration of firmware hotplug).
-
-Receiving DVB-T in Australia
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-I  have  no  experience of DVB-T in other countries other than
-Australia,  so  I will attempt to explain how it works here in
-Melbourne  and how this affects the configuration of the DVB-T
-card.
-
-The  Digital  Broadcasting  Australia  website has a Reception
-locatortool which provides information on transponder channels
-and  frequencies.  My  local  transmitter  happens to be Mount
-Dandenong.
-
-The frequencies broadcast by Mount Dandenong are:
-
-Table 1. Transponder Frequencies Mount Dandenong, Vic, Aus.
-Broadcaster Channel Frequency
-ABC         VHF 12  226.5 MHz
-TEN         VHF 11  219.5 MHz
-NINE        VHF 8   191.625 MHz
-SEVEN       VHF 6   177.5 MHz
-SBS         UHF 29  536.5 MHz
-
-The Scan utility has a set of compiled-in defaults for various
-countries and regions, but if they do not suit, or if you have
-a pre-compiled scan binary, you can specify a data file on the
-command  line which contains the transponder frequencies. Here
-is a sample file for the above channel transponders:
-
-::
-
-	# Data file for DVB scan program
-	#
-	# C Frequency SymbolRate FEC QAM
-	# S Frequency Polarisation SymbolRate FEC
-	# T Frequency Bandwidth FEC FEC2 QAM Mode Guard Hier
-	T 226500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-	T 191625000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-	T 219500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-	T 177500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-	T 536500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-
-The   defaults   for   the  transponder  frequency  and  other
-modulation parameters were obtained from www.dba.org.au.
-
-When  Scan  runs, it will output channels.conf information for
-any  channel's transponders which the card's frontend can lock
-onto.  (i.e.  any  whose  signal  is  strong  enough  at  your
-antenna).
-
-Here's my channels.conf file for anyone who's interested:
-
-::
-
-	ABC HDTV:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:2307:0:560
-	ABC TV Melbourne:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:561
-	ABC TV 2:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:562
-	ABC TV 3:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:563
-	ABC TV 4:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:564
-	ABC DiG Radio:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:2311:566
-	TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1585
-	TEN Digital 1:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1586
-	TEN Digital 2:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1587
-	TEN Digital 3:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1588
-	TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1589
-	TEN Digital 4:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1590
-	TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1591
-	TEN HD:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:0:1592
-	TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1593
-	Nine Digital:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:513:660:1072
-	Nine Digital HD:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:0:1073
-	Nine Guide:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:670:1074
-	7 Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1328
-	7 Digital 1:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1329
-	7 Digital 2:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1330
-	7 Digital 3:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1331
-	7 HD Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:833:834:1332
-	7 Program Guide:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:865:866:1334
-	SBS HD:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:102:103:784
-	SBS DIGITAL 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:161:81:785
-	SBS DIGITAL 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:162:83:786
-	SBS EPG:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:163:85:787
-	SBS RADIO 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:201:798
-	SBS RADIO 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:202:799
-
-Known Limitations
-~~~~~~~~~~~~~~~~~
-
-At  present  I can say with confidence that the frontend tunes
-via /dev/dvb/adapter{x}/frontend0 and supplies an MPEG2 stream
-via   /dev/dvb/adapter{x}/dvr0.   I   have   not   tested  the
-functionality  of any other part of the card yet. I will do so
-over time and update this document.
-
-There  are some limitations in the i2c layer due to a returned
-error message inconsistency. Although this generates errors in
-dmesg  and  the  system logs, it does not appear to affect the
-ability of the frontend to function correctly.
-
-Further Update
-~~~~~~~~~~~~~~
-
-dvbstream  and  VideoLAN  Client on windows works a treat with
-DVB,  in  fact  this  is  currently  serving as my main way of
-viewing  DVB-T  at  the  moment.  Additionally, VLC is happily
-decoding  HDTV  signals,  although  the PC is dropping the odd
-frame here and there - I assume due to processing capability -
-as all the decoding is being done under windows in software.
-
-Many  thanks to Nigel Pearson for the updates to this document
-since the recent revision of the driver.
diff --git a/Documentation/media/dvb-drivers/bt8xx.rst b/Documentation/media/dvb-drivers/bt8xx.rst
deleted file mode 100644
index 7936cd96fc8f..000000000000
--- a/Documentation/media/dvb-drivers/bt8xx.rst
+++ /dev/null
@@ -1,124 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-How to get the bt8xx cards working
-==================================
-
-Authors: Richard Walker,
-	 Jamie Honan,
-	 Michael Hunold,
-	 Manu Abraham,
-	 Uwe Bugla,
-	 Michael Krufky
-
-.. note::
-
-   This documentation is outdated. Please check at the DVB wiki
-   at https://linuxtv.org/wiki for more updated info.
-
-General information
--------------------
-
-This class of cards has a bt878a as the PCI interface, and require the bttv driver
-for accessing the i2c bus and the gpio pins of the bt8xx chipset.
-Please see Documentation/media/dvb-drivers/cards.rst => o Cards based on the Conexant Bt8xx PCI bridge:
-
-Compiling kernel please enable:
-
-#) ``Device drivers`` => ``Multimedia devices`` => ``Video For Linux`` => ``Enable Video for Linux API 1 (DEPRECATED)``
-#) ``Device drivers`` => ``Multimedia devices`` => ``Video For Linux`` => ``Video Capture Adapters`` => ``BT848 Video For Linux``
-#) ``Device drivers`` => ``Multimedia devices`` => ``Digital Video Broadcasting Devices`` => ``DVB for Linux`` ``DVB Core Support`` ``Bt8xx based PCI Cards``
-
-  Please use the following options with care as deselection of drivers which are in fact necessary may result in DVB devices that cannot be tuned due to lack of driver support:
-  You can save RAM by deselecting every frontend module that your DVB card does not need.
-
-  First please remove the static dependency of DVB card drivers on all frontend modules for all possible card variants by enabling:
-
-#) ``Device drivers`` => ``Multimedia devices`` => ``Digital Video Broadcasting Devices`` => ``DVB for Linux`` ``DVB Core Support`` ``Load and attach frontend modules as needed``
-
-  If you know the frontend driver that your card needs please enable:
-
-#) ``Device drivers`` => ``Multimedia devices`` => ``Digital Video Broadcasting Devices`` => ``DVB for Linux`` ``DVB Core Support`` ``Customise DVB Frontends`` => ``Customise the frontend modules to build``
-
- Then please select your card-specific frontend module.
-
-Loading Modules
----------------
-
-Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically.
-Exceptions are:
-- Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom.
-People running udev please see Documentation/media/dvb-drivers/udev.rst.
-
-In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary:
-
-Running TwinHan and Clones
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: none
-
-	$ modprobe bttv card=113
-	$ modprobe dst
-
-Useful parameters for verbosity level and debugging the dst module:
-
-.. code-block:: none
-
-	verbose=0:		messages are disabled
-		1:		only error messages are displayed
-		2:		notifications are displayed
-		3:		other useful messages are displayed
-		4:		debug setting
-	dst_addons=0:		card is a free to air (FTA) card only
-		0x20:	card has a conditional access slot for scrambled channels
-
-The autodetected values are determined by the cards' "response string".
-In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI].
-For bug reports please send in a complete log with verbose=4 activated.
-Please also see Documentation/media/dvb-drivers/ci.rst.
-
-Running multiple cards
-~~~~~~~~~~~~~~~~~~~~~~
-
-Examples of card ID's:
-
-.. code-block:: none
-
-	Pinnacle PCTV Sat:		 94
-	Nebula Electronics Digi TV:	104
-	pcHDTV HD-2000 TV:		112
-	Twinhan DST and clones:		113
-	Avermedia AverTV DVB-T 771:	123
-	Avermedia AverTV DVB-T 761:	124
-	DViCO FusionHDTV DVB-T Lite:	128
-	DViCO FusionHDTV 5 Lite:	135
-
-.. note::
-
-   The order of the card ID should be uprising:
-
-   Example:
-
-   .. code-block:: none
-
-	$ modprobe bttv card=113 card=135
-
-For a full list of card ID's please see Documentation/media/v4l-drivers/bttv-cardlist.rst.
-In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org.
-
-Probing the cards with broken PCI subsystem ID
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-There are some TwinHan cards that the EEPROM has become corrupted for some
-reason. The cards do not have correct PCI subsystem ID. But we can force
-probing the cards with broken PCI subsystem ID
-
-.. code-block:: none
-
-	$ echo 109e 0878 $subvendor $subdevice > \
-		/sys/bus/pci/drivers/bt878/new_id
-
-.. code-block:: none
-
-	109e: PCI_VENDOR_ID_BROOKTREE
-	0878: PCI_DEVICE_ID_BROOKTREE_878
-
diff --git a/Documentation/media/dvb-drivers/cards.rst b/Documentation/media/dvb-drivers/cards.rst
deleted file mode 100644
index e2e30a56b450..000000000000
--- a/Documentation/media/dvb-drivers/cards.rst
+++ /dev/null
@@ -1,146 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Hardware supported by the linuxtv.org DVB drivers
-=================================================
-
-.. note::
-
-   This documentation is outdated. Please check at the DVB wiki
-   at https://linuxtv.org/wiki for more updated info.
-
-   Please look at
-   https://linuxtv.org/wiki/index.php/Hardware_Device_Information
-   for an updated list of supported cards.
-
-Generally, the DVB hardware manufacturers frequently change the
-frontends (i.e. tuner / demodulator units) used, usually without
-changing the product name, revision number or specs. Some cards
-are also available in versions with different frontends for
-DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed separately.
-
-.. note::
-
-  #) There is no guarantee that every frontend driver works
-     out of the box with every card, because of different wiring.
-
-  #) The demodulator chips can be used with a variety of
-     tuner/PLL chips, and not all combinations are supported. Often
-     the demodulator and tuner/PLL chip are inside a metal box for
-     shielding, and the whole metal box has its own part number.
-
-
-- Frontends drivers:
-
-  - dvb_dummy_fe: for testing...
-
-  DVB-S:
-   - ves1x93		: Alps BSRV2 (ves1893 demodulator) and dbox2 (ves1993)
-   - cx24110		: Conexant HM1221/HM1811 (cx24110 or cx24106 demod, cx24108 PLL)
-   - grundig_29504-491	: Grundig 29504-491 (Philips TDA8083 demodulator), tsa5522 PLL
-   - mt312		: Zarlink mt312 or Mitel vp310 demodulator, sl1935 or tsa5059 PLLi, Technisat Sky2Pc with bios Rev. 2.3
-   - stv0299		: Alps BSRU6 (tsa5059 PLL), LG TDQB-S00x (tsa5059 PLL),
-			  LG TDQF-S001F (sl1935 PLL), Philips SU1278 (tua6100 PLL),
-			  Philips SU1278SH (tsa5059 PLL), Samsung TBMU24112IMB, Technisat Sky2Pc with bios Rev. 2.6
-
-  DVB-C:
-   - ves1820		: various (ves1820 demodulator, sp5659c or spXXXX PLL)
-   - at76c651		: Atmel AT76c651(B) with DAT7021 PLL
-
-  DVB-T:
-   - alps_tdlb7		: Alps TDLB7 (sp8870 demodulator, sp5659 PLL)
-   - alps_tdmb7		: Alps TDMB7 (cx22700 demodulator)
-   - grundig_29504-401	: Grundig 29504-401 (LSI L64781 demodulator), tsa5060 PLL
-   - tda1004x		: Philips tda10045h (td1344 or tdm1316l PLL)
-   - nxt6000 		: Alps TDME7 (MITEL SP5659 PLL), Alps TDED4 (TI ALP510 PLL), Comtech DVBT-6k07 (SP5730 PLL), (NxtWave Communications NXT6000 demodulator)
-   - sp887x		: Microtune 7202D
-   - dib3000mb	: DiBcom 3000-MB demodulator
-
-  DVB-S/C/T:
-   - dst		: TwinHan DST Frontend
-
-  ATSC:
-   - nxt200x		: Nxtwave NXT2002 & NXT2004
-   - or51211		: or51211 based (pcHDTV HD2000 card)
-   - or51132		: or51132 based (pcHDTV HD3000 card)
-   - bcm3510		: Broadcom BCM3510
-   - lgdt330x		: LG Electronics DT3302 & DT3303
-
-
-- Cards based on the Phillips saa7146 multimedia PCI bridge chip:
-
-  - TI AV7110 based cards (i.e. with hardware MPEG decoder):
-    - Siemens/Technotrend/Hauppauge PCI DVB card revision 1.1, 1.3, 1.5, 1.6, 2.1 (aka Hauppauge Nexus)
-  - "budget" cards (i.e. without hardware MPEG decoder):
-    - Technotrend Budget / Hauppauge WinTV-Nova PCI Cards
-    - SATELCO Multimedia PCI
-    - KNC1 DVB-S, Typhoon DVB-S, Terratec Cinergy 1200 DVB-S (no CI support)
-    - Typhoon DVB-S budget
-    - Fujitsu-Siemens Activy DVB-S budget card
-
-- Cards based on the B2C2 Inc. FlexCopII/IIb/III:
-
-  - Technisat SkyStar2 PCI DVB card revision 2.3, 2.6B, 2.6C
-
-- Cards based on the Conexant Bt8xx PCI bridge:
-
-  - Pinnacle PCTV Sat DVB
-  - Nebula Electronics DigiTV
-  - TwinHan DST
-  - Avermedia DVB-T
-  - ChainTech digitop DST-1000 DVB-S
-  - pcHDTV HD-2000 TV
-  - DViCO FusionHDTV DVB-T Lite
-  - DViCO FusionHDTV5 Lite
-
-- Technotrend / Hauppauge DVB USB devices:
-
-  - Nova USB
-  - DEC 2000-T, 3000-S, 2540-T
-
-- DiBcom DVB-T USB based devices:
-
-  - Twinhan VisionPlus VisionDTV USB-Ter DVB-T Device
-  - HAMA DVB-T USB device
-  - CTS Portable (Chinese Television System)
-  - KWorld V-Stream XPERT DTV DVB-T USB
-  - JetWay DTV DVB-T USB
-  - ADSTech Instant TV DVB-T USB
-  - Ultima Electronic/Artec T1 USB TVBOX (AN2135 and AN2235)
-  - Compro Videomate DVB-U2000 - DVB-T USB
-  - Grandtec USB DVB-T
-  - Avermedia AverTV DVBT USB
-  - DiBcom USB DVB-T reference device (non-public)
-  - Yakumo DVB-T mobile USB2.0
-  - DiBcom USB2.0 DVB-T reference device (non-public)
-
-- Experimental support for the analog module of the Siemens DVB-C PCI card
-
-- Cards based on the Conexant cx2388x PCI bridge:
-
-  - ADS Tech Instant TV DVB-T PCI
-  - ATI HDTV Wonder
-  - digitalnow DNTV Live! DVB-T
-  - DViCO FusionHDTV DVB-T1
-  - DViCO FusionHDTV DVB-T Plus
-  - DViCO FusionHDTV3 Gold-Q
-  - DViCO FusionHDTV3 Gold-T
-  - DViCO FusionHDTV5 Gold
-  - Hauppauge Nova-T DVB-T
-  - KWorld/VStream XPert DVB-T
-  - pcHDTV HD3000 HDTV
-  - TerraTec Cinergy 1400 DVB-T
-  - WinFast DTV1000-T
-
-- Cards based on the Phillips saa7134 PCI bridge:
-
-  - Medion 7134
-  - Pinnacle PCTV 300i DVB-T + PAL
-  - LifeView FlyDVB-T DUO
-  - Typhoon DVB-T Duo Digital/Analog Cardbus
-  - Philips TOUGH DVB-T reference design
-  - Philips EUROPA V3 reference design
-  - Compro Videomate DVB-T300
-  - Compro Videomate DVB-T200
-  - AVerMedia AVerTVHD MCE A180
-  - KWorld PC150-U ATSC Hybrid
-
diff --git a/Documentation/media/dvb-drivers/ci.rst b/Documentation/media/dvb-drivers/ci.rst
deleted file mode 100644
index 35f33f1f9e2a..000000000000
--- a/Documentation/media/dvb-drivers/ci.rst
+++ /dev/null
@@ -1,231 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Digital TV Conditional Access Interface (CI API)
-================================================
-
-
-.. note::
-
-   This documentation is outdated.
-
-This document describes the usage of the high level CI API as
-in accordance to the Linux DVB API. This is a not a documentation for the,
-existing low level CI API.
-
-.. note::
-
-   For the Twinhan/Twinhan clones, the dst_ca module handles the CI
-   hardware handling.This module is loaded automatically if a CI
-   (Common Interface, that holds the CAM (Conditional Access Module)
-   is detected.
-
-ca_zap
-~~~~~~
-
-A userspace application, like ``ca_zap`` is required to handle encrypted
-MPEG-TS streams.
-
-The ``ca_zap`` userland application is in charge of sending the
-descrambling related information to the Conditional Access Module (CAM).
-
-This application requires the following to function properly as of now.
-
-a) Tune to a valid channel, with szap.
-
-  eg: $ szap -c channels.conf -r "TMC" -x
-
-b) a channels.conf containing a valid PMT PID
-
-  eg: TMC:11996:h:0:27500:278:512:650:321
-
-  here 278 is a valid PMT PID. the rest of the values are the
-  same ones that szap uses.
-
-c) after running a szap, you have to run ca_zap, for the
-   descrambler to function,
-
-  eg: $ ca_zap channels.conf "TMC"
-
-d) Hopefully enjoy your favourite subscribed channel as you do with
-   a FTA card.
-
-.. note::
-
-  Currently ca_zap, and dst_test, both are meant for demonstration
-  purposes only, they can become full fledged applications if necessary.
-
-
-Cards that fall in this category
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-At present the cards that fall in this category are the Twinhan and its
-clones, these cards are available as VVMER, Tomato, Hercules, Orange and
-so on.
-
-CI modules that are supported
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The CI module support is largely dependent upon the firmware on the cards
-Some cards do support almost all of the available CI modules. There is
-nothing much that can be done in order to make additional CI modules
-working with these cards.
-
-Modules that have been tested by this driver at present are
-
-(1) Irdeto 1 and 2 from SCM
-(2) Viaccess from SCM
-(3) Dragoncam
-
-The High level CI API
-~~~~~~~~~~~~~~~~~~~~~
-
-For the programmer
-^^^^^^^^^^^^^^^^^^
-
-With the High Level CI approach any new card with almost any random
-architecture can be implemented with this style, the definitions
-inside the switch statement can be easily adapted for any card, thereby
-eliminating the need for any additional ioctls.
-
-The disadvantage is that the driver/hardware has to manage the rest. For
-the application programmer it would be as simple as sending/receiving an
-array to/from the CI ioctls as defined in the Linux DVB API. No changes
-have been made in the API to accommodate this feature.
-
-
-Why the need for another CI interface?
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-This is one of the most commonly asked question. Well a nice question.
-Strictly speaking this is not a new interface.
-
-The CI interface is defined in the DVB API in ca.h as:
-
-.. code-block:: c
-
-	typedef struct ca_slot_info {
-		int num;               /* slot number */
-
-		int type;              /* CA interface this slot supports */
-	#define CA_CI            1     /* CI high level interface */
-	#define CA_CI_LINK       2     /* CI link layer level interface */
-	#define CA_CI_PHYS       4     /* CI physical layer level interface */
-	#define CA_DESCR         8     /* built-in descrambler */
-	#define CA_SC          128     /* simple smart card interface */
-
-		unsigned int flags;
-	#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
-	#define CA_CI_MODULE_READY   2
-	} ca_slot_info_t;
-
-This CI interface follows the CI high level interface, which is not
-implemented by most applications. Hence this area is revisited.
-
-This CI interface is quite different in the case that it tries to
-accommodate all other CI based devices, that fall into the other categories.
-
-This means that this CI interface handles the EN50221 style tags in the
-Application layer only and no session management is taken care of by the
-application. The driver/hardware will take care of all that.
-
-This interface is purely an EN50221 interface exchanging APDU's. This
-means that no session management, link layer or a transport layer do
-exist in this case in the application to driver communication. It is
-as simple as that. The driver/hardware has to take care of that.
-
-With this High Level CI interface, the interface can be defined with the
-regular ioctls.
-
-All these ioctls are also valid for the High level CI interface
-
-#define CA_RESET          _IO('o', 128)
-#define CA_GET_CAP        _IOR('o', 129, ca_caps_t)
-#define CA_GET_SLOT_INFO  _IOR('o', 130, ca_slot_info_t)
-#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
-#define CA_GET_MSG        _IOR('o', 132, ca_msg_t)
-#define CA_SEND_MSG       _IOW('o', 133, ca_msg_t)
-#define CA_SET_DESCR      _IOW('o', 134, ca_descr_t)
-
-
-On querying the device, the device yields information thus:
-
-.. code-block:: none
-
-	CA_GET_SLOT_INFO
-	----------------------------
-	Command = [info]
-	APP: Number=[1]
-	APP: Type=[1]
-	APP: flags=[1]
-	APP: CI High level interface
-	APP: CA/CI Module Present
-
-	CA_GET_CAP
-	----------------------------
-	Command = [caps]
-	APP: Slots=[1]
-	APP: Type=[1]
-	APP: Descrambler keys=[16]
-	APP: Type=[1]
-
-	CA_SEND_MSG
-	----------------------------
-	Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1]
-	Found CA descriptor @ program level
-
-	(20) ES type=[2] ES pid=[201]  ES length =[0 (0x0)]
-	(25) ES type=[4] ES pid=[301]  ES length =[0 (0x0)]
-	ca_message length is 25 (0x19) bytes
-	EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00]
-
-
-Not all ioctl's are implemented in the driver from the API, the other
-features of the hardware that cannot be implemented by the API are achieved
-using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is
-used to exchange the data to maintain compatibility with other hardware.
-
-.. code-block:: c
-
-	/* a message to/from a CI-CAM */
-	typedef struct ca_msg {
-		unsigned int index;
-		unsigned int type;
-		unsigned int length;
-		unsigned char msg[256];
-	} ca_msg_t;
-
-
-The flow of data can be described thus,
-
-.. code-block:: none
-
-	App (User)
-	-----
-	parse
-	  |
-	  |
-	  v
-	en50221 APDU (package)
-   --------------------------------------
-   |	  |				| High Level CI driver
-   |	  |				|
-   |	  v				|
-   |	en50221 APDU (unpackage)	|
-   |	  |				|
-   |	  |				|
-   |	  v				|
-   |	sanity checks			|
-   |	  |				|
-   |	  |				|
-   |	  v				|
-   |	do (H/W dep)			|
-   --------------------------------------
-	  |    Hardware
-	  |
-	  v
-
-
-
-
-The High Level CI interface uses the EN50221 DVB standard, following a
-standard ensures futureproofness.
diff --git a/Documentation/media/dvb-drivers/contributors.rst b/Documentation/media/dvb-drivers/contributors.rst
deleted file mode 100644
index f23b6e6faf46..000000000000
--- a/Documentation/media/dvb-drivers/contributors.rst
+++ /dev/null
@@ -1,131 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Contributors
-============
-
-.. note::
-
-   This documentation is outdated. There are several other DVB contributors
-   that aren't listed below.
-
-Thanks go to the following people for patches and contributions:
-
-- Michael Hunold <m.hunold@gmx.de>
-
-  - for the initial saa7146 driver and its recent overhaul
-
-- Christian Theiss
-
-  - for his work on the initial Linux DVB driver
-
-- Marcus Metzler <mocm@metzlerbros.de> and
-  Ralph Metzler <rjkm@metzlerbros.de>
-
-  - for their continuing work on the DVB driver
-
-- Michael Holzt <kju@debian.org>
-
-  - for his contributions to the dvb-net driver
-
-- Diego Picciani <d.picciani@novacomp.it>
-
-  - for CyberLogin for Linux which allows logging onto EON
-    (in case you are wondering where CyberLogin is, EON changed its login
-    procedure and CyberLogin is no longer used.)
-
-- Martin Schaller <martin@smurf.franken.de>
-
-  - for patching the cable card decoder driver
-
-- Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>
-
-  - for various fixes regarding tuning, OSD and CI stuff and his work on VDR
-
-- Steve Brown <sbrown@cortland.com>
-
-  - for his AFC kernel thread
-
-- Christoph Martin <martin@uni-mainz.de>
-
-  - for his LIRC infrared handler
-
-- Andreas Oberritter <obi@linuxtv.org>,
-  Dennis Noermann <dennis.noermann@noernet.de>,
-  Felix Domke <tmbinc@elitedvb.net>,
-  Florian Schirmer <jolt@tuxbox.org>,
-  Ronny Strutz <3des@elitedvb.de>,
-  Wolfram Joost <dbox2@frokaschwei.de>
-  and all the other dbox2 people
-
-  - for many bugfixes in the generic DVB Core, frontend drivers and
-    their work on the dbox2 port of the DVB driver
-
-- Oliver Endriss <o.endriss@gmx.de>
-
-  - for many bugfixes
-
-- Andrew de Quincey <adq_dvb@lidskialf.net>
-
-  - for the tda1004x frontend driver, and various bugfixes
-
-- Peter Schildmann <peter.schildmann@web.de>
-
-  - for the driver for the Technisat SkyStar2 PCI DVB card
-
-- Vadim Catana <skystar@moldova.cc>,
-  Roberto Ragusa <r.ragusa@libero.it> and
-  Augusto Cardoso <augusto@carhil.net>
-
-  - for all the work for the FlexCopII chipset by B2C2,Inc.
-
-- Davor Emard <emard@softhome.net>
-
-  - for his work on the budget drivers, the demux code,
-    the module unloading problems, ...
-
-- Hans-Frieder Vogt <hfvogt@arcor.de>
-
-  - for his work on calculating and checking the crc's for the
-    TechnoTrend/Hauppauge DEC driver firmware
-
-- Michael Dreher <michael@5dot1.de> and
-  Andreas 'randy' Weinberger
-
-  - for the support of the Fujitsu-Siemens Activy budget DVB-S
-
-- Kenneth Aafløy <ke-aa@frisurf.no>
-
-  - for adding support for Typhoon DVB-S budget card
-
-- Ernst Peinlich <e.peinlich@inode.at>
-
-  - for tuning/DiSEqC support for the DEC 3000-s
-
-- Peter Beutner <p.beutner@gmx.net>
-
-  - for the IR code for the ttusb-dec driver
-
-- Wilson Michaels <wilsonmichaels@earthlink.net>
-
-  - for the lgdt330x frontend driver, and various bugfixes
-
-- Michael Krufky <mkrufky@linuxtv.org>
-
-  - for maintaining v4l/dvb inter-tree dependencies
-
-- Taylor Jacob <rtjacob@earthlink.net>
-
-  - for the nxt2002 frontend driver
-
-- Jean-Francois Thibert <jeanfrancois@sagetv.com>
-
-  - for the nxt2004 frontend driver
-
-- Kirk Lapray <kirk.lapray@gmail.com>
-
-  - for the or51211 and or51132 frontend drivers, and
-    for merging the nxt2002 and nxt2004 modules into a
-    single nxt200x frontend driver.
-
-(If you think you should be in this list, but you are not, drop a
-line to the DVB mailing list)
diff --git a/Documentation/media/dvb-drivers/dvb-usb.rst b/Documentation/media/dvb-drivers/dvb-usb.rst
deleted file mode 100644
index b2d5d9e62b30..000000000000
--- a/Documentation/media/dvb-drivers/dvb-usb.rst
+++ /dev/null
@@ -1,357 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Idea behind the dvb-usb-framework
-=================================
-
-.. note::
-
-   #) This documentation is outdated. Please check at the DVB wiki
-      at https://linuxtv.org/wiki for more updated info.
-
-   #) **deprecated:** Newer DVB USB drivers should use the dvb-usb-v2 framework.
-
-In March 2005 I got the new Twinhan USB2.0 DVB-T device. They provided specs
-and a firmware.
-
-Quite keen I wanted to put the driver (with some quirks of course) into dibusb.
-After reading some specs and doing some USB snooping, it realized, that the
-dibusb-driver would be a complete mess afterwards. So I decided to do it in a
-different way: With the help of a dvb-usb-framework.
-
-The framework provides generic functions (mostly kernel API calls), such as:
-
-- Transport Stream URB handling in conjunction with dvb-demux-feed-control
-  (bulk and isoc are supported)
-- registering the device for the DVB-API
-- registering an I2C-adapter if applicable
-- remote-control/input-device handling
-- firmware requesting and loading (currently just for the Cypress USB
-  controllers)
-- other functions/methods which can be shared by several drivers (such as
-  functions for bulk-control-commands)
-- TODO: a I2C-chunker. It creates device-specific chunks of register-accesses
-  depending on length of a register and the number of values that can be
-  multi-written and multi-read.
-
-The source code of the particular DVB USB devices does just the communication
-with the device via the bus. The connection between the DVB-API-functionality
-is done via callbacks, assigned in a static device-description (struct
-dvb_usb_device) each device-driver has to have.
-
-For an example have a look in drivers/media/usb/dvb-usb/vp7045*.
-
-Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the
-ttusb; flexcop-usb already benefits from the generic flexcop-device) to use
-the dvb-usb-lib.
-
-TODO: dynamic enabling and disabling of the pid-filter in regard to number of
-feeds requested.
-
-Supported devices
------------------
-
-See the LinuxTV DVB Wiki at https://linuxtv.org for a complete list of
-cards/drivers/firmwares:
-https://linuxtv.org/wiki/index.php/DVB_USB
-
-0. History & News:
-
-  2005-06-30
-
-  - added support for WideView WT-220U (Thanks to Steve Chang)
-
-  2005-05-30
-
-  - added basic isochronous support to the dvb-usb-framework
-  - added support for Conexant Hybrid reference design and Nebula
-	       DigiTV USB
-
-  2005-04-17
-
-  - all dibusb devices ported to make use of the dvb-usb-framework
-
-  2005-04-02
-
-  - re-enabled and improved remote control code.
-
-  2005-03-31
-
-  - ported the Yakumo/Hama/Typhoon DVB-T USB2.0 device to dvb-usb.
-
-  2005-03-30
-
-  - first commit of the dvb-usb-module based on the dibusb-source.
-    First device is a new driver for the
-    TwinhanDTV Alpha / MagicBox II USB2.0-only DVB-T device.
-  - (change from dvb-dibusb to dvb-usb)
-
-  2005-03-28
-
-  - added support for the AVerMedia AverTV DVB-T USB2.0 device
-    (Thanks to Glen Harris and Jiun-Kuei Jung, AVerMedia)
-
-  2005-03-14
-
-  - added support for the Typhoon/Yakumo/HAMA DVB-T mobile USB2.0
-
-  2005-02-11
-
-  - added support for the KWorld/ADSTech Instant DVB-T USB2.0.
-    Thanks a lot to Joachim von Caron
-
-  2005-02-02
-  - added support for the Hauppauge Win-TV Nova-T USB2
-
-  2005-01-31
-  - distorted streaming is gone for USB1.1 devices
-
-  2005-01-13
-
-  - moved the mirrored pid_filter_table back to dvb-dibusb
-    first almost working version for HanfTek UMT-010
-    found out, that Yakumo/HAMA/Typhoon are predecessors of the HanfTek UMT-010
-
-  2005-01-10
-
-  - refactoring completed, now everything is very delightful
-
-  - tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a
-    Panasonic Tuner assembled). Tunerprobing implemented.
-    Thanks a lot to Gunnar Wittich.
-
-  2004-12-29
-
-  - after several days of struggling around bug of no returning URBs fixed.
-
-  2004-12-26
-
-  - refactored the dibusb-driver, split into separate files
-  - i2c-probing enabled
-
-  2004-12-06
-
-  - possibility for demod i2c-address probing
-  - new usb IDs (Compro, Artec)
-
-  2004-11-23
-
-  - merged changes from DiB3000MC_ver2.1
-  - revised the debugging
-  - possibility to deliver the complete TS for USB2.0
-
-  2004-11-21
-
-  - first working version of the dib3000mc/p frontend driver.
-
-  2004-11-12
-
-  - added additional remote control keys. Thanks to Uwe Hanke.
-
-  2004-11-07
-
-  - added remote control support. Thanks to David Matthews.
-
-  2004-11-05
-
-  - added support for a new devices (Grandtec/Avermedia/Artec)
-  - merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD
-  - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
-    better settled there (added xfer_ops-struct)
-  - created a common files for frontends (mc/p/mb)
-
-  2004-09-28
-
-  - added support for a new device (Unknown, vendor ID is Hyper-Paltek)
-
-  2004-09-20
-
-  - added support for a new device (Compro DVB-U2000), thanks
-    to Amaury Demol for reporting
-  - changed usb TS transfer method (several urbs, stopping transfer
-    before setting a new pid)
-
-  2004-09-13
-
-  - added support for a new device (Artec T1 USB TVBOX), thanks
-    to Christian Motschke for reporting
-
-  2004-09-05
-
-  - released the dibusb device and dib3000mb-frontend driver
-    (old news for vp7041.c)
-
-  2004-07-15
-
-  - found out, by accident, that the device has a TUA6010XS for PLL
-
-  2004-07-12
-
-  - figured out, that the driver should also work with the
-    CTS Portable (Chinese Television System)
-
-  2004-07-08
-
-  - firmware-extraction-2.422-problem solved, driver is now working
-    properly with firmware extracted from 2.422
-  - #if for 2.6.4 (dvb), compile issue
-  - changed firmware handling, see vp7041.txt sec 1.1
-
-  2004-07-02
-
-  - some tuner modifications, v0.1, cleanups, first public
-
-  2004-06-28
-
-  - now using the dvb_dmx_swfilter_packets, everything runs fine now
-
-  2004-06-27
-
-  - able to watch and switching channels (pre-alpha)
-  - no section filtering yet
-
-  2004-06-06
-
-  - first TS received, but kernel oops :/
-
-  2004-05-14
-
-  - firmware loader is working
-
-  2004-05-11
-
-  - start writing the driver
-
-How to use?
------------
-
-Firmware
-~~~~~~~~
-
-Most of the USB drivers need to download a firmware to the device before start
-working.
-
-Have a look at the Wikipage for the DVB-USB-drivers to find out, which firmware
-you need for your device:
-
-https://linuxtv.org/wiki/index.php/DVB_USB
-
-Compiling
-~~~~~~~~~
-
-Since the driver is in the linux kernel, activating the driver in
-your favorite config-environment should sufficient. I recommend
-to compile the driver as module. Hotplug does the rest.
-
-If you use dvb-kernel enter the build-2.6 directory run 'make' and 'insmod.sh
-load' afterwards.
-
-Loading the drivers
-~~~~~~~~~~~~~~~~~~~
-
-Hotplug is able to load the driver, when it is needed (because you plugged
-in the device).
-
-If you want to enable debug output, you have to load the driver manually and
-from within the dvb-kernel cvs repository.
-
-first have a look, which debug level are available:
-
-.. code-block:: none
-
-	# modinfo dvb-usb
-	# modinfo dvb-usb-vp7045
-
-	etc.
-
-.. code-block:: none
-
-	modprobe dvb-usb debug=<level>
-	modprobe dvb-usb-vp7045 debug=<level>
-	etc.
-
-should do the trick.
-
-When the driver is loaded successfully, the firmware file was in
-the right place and the device is connected, the "Power"-LED should be
-turned on.
-
-At this point you should be able to start a dvb-capable application. I'm use
-(t|s)zap, mplayer and dvbscan to test the basics. VDR-xine provides the
-long-term test scenario.
-
-Known problems and bugs
------------------------
-
-- Don't remove the USB device while running an DVB application, your system
-  will go crazy or die most likely.
-
-Adding support for devices
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-TODO
-
-USB1.1 Bandwidth limitation
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-A lot of the currently supported devices are USB1.1 and thus they have a
-maximum bandwidth of about 5-6 MBit/s when connected to a USB2.0 hub.
-This is not enough for receiving the complete transport stream of a
-DVB-T channel (which is about 16 MBit/s). Normally this is not a
-problem, if you only want to watch TV (this does not apply for HDTV),
-but watching a channel while recording another channel on the same
-frequency simply does not work very well. This applies to all USB1.1
-DVB-T devices, not just the dvb-usb-devices)
-
-The bug, where the TS is distorted by a heavy usage of the device is gone
-definitely. All dvb-usb-devices I was using (Twinhan, Kworld, DiBcom) are
-working like charm now with VDR. Sometimes I even was able to record a channel
-and watch another one.
-
-Comments
-~~~~~~~~
-
-Patches, comments and suggestions are very very welcome.
-
-3. Acknowledgements
--------------------
-
-   Amaury Demol (Amaury.Demol@parrot.com) and Francois Kanounnikoff from DiBcom for
-   providing specs, code and help, on which the dvb-dibusb, dib3000mb and
-   dib3000mc are based.
-
-   David Matthews for identifying a new device type (Artec T1 with AN2235)
-   and for extending dibusb with remote control event handling. Thank you.
-
-   Alex Woods for frequently answering question about usb and dvb
-   stuff, a big thank you.
-
-   Bernd Wagner for helping with huge bug reports and discussions.
-
-   Gunnar Wittich and Joachim von Caron for their trust for providing
-   root-shells on their machines to implement support for new devices.
-
-   Allan Third and Michael Hutchinson for their help to write the Nebula
-   digitv-driver.
-
-   Glen Harris for bringing up, that there is a new dibusb-device and Jiun-Kuei
-   Jung from AVerMedia who kindly provided a special firmware to get the device
-   up and running in Linux.
-
-   Jennifer Chen, Jeff and Jack from Twinhan for kindly supporting by
-   writing the vp7045-driver.
-
-   Steve Chang from WideView for providing information for new devices and
-   firmware files.
-
-   Michael Paxton for submitting remote control keymaps.
-
-   Some guys on the linux-dvb mailing list for encouraging me.
-
-   Peter Schildmann >peter.schildmann-nospam-at-web.de< for his
-   user-level firmware loader, which saves a lot of time
-   (when writing the vp7041 driver)
-
-   Ulf Hermenau for helping me out with traditional chinese.
-
-   André Smoktun and Christian Frömmel for supporting me with
-   hardware and listening to my problems very patiently.
diff --git a/Documentation/media/dvb-drivers/faq.rst b/Documentation/media/dvb-drivers/faq.rst
deleted file mode 100644
index 52f153d18278..000000000000
--- a/Documentation/media/dvb-drivers/faq.rst
+++ /dev/null
@@ -1,169 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-FAQ
-===
-
-.. note::
-
-   This documentation is outdated. Please check at the DVB wiki
-   at https://linuxtv.org/wiki for more updated info.
-
-Some very frequently asked questions about linuxtv-dvb
-
-1. The signal seems to die a few seconds after tuning.
-
-	It's not a bug, it's a feature. Because the frontends have
-	significant power requirements (and hence get very hot), they
-	are powered down if they are unused (i.e. if the frontend device
-	is closed). The dvb-core.o module parameter "dvb_shutdown_timeout"
-	allow you to change the timeout (default 5 seconds). Setting the
-	timeout to 0 disables the timeout feature.
-
-2. How can I watch TV?
-
-	The driver distribution includes some simple utilities which
-	are mainly intended for testing and to demonstrate how the
-	DVB API works.
-
-	Depending on whether you have a DVB-S, DVB-C or DVB-T card, use
-	apps/szap/szap, czap or tzap. You must supply a channel list
-	in ~/.[sct]zap/channels.conf. If you are lucky you can just copy
-	one of the supplied channel lists, or you can create a new one
-	by running apps/scan/scan. If you run scan on an unknown network
-	you might have to supply some start data in apps/scan/initial.h.
-
-	If you have a card with a built-in hardware MPEG-decoder the
-	drivers create a video4linux device (/dev/v4l/video0) which
-	you can use to watch TV with any v4l application. xawtv is known
-	to work. Note that you cannot change channels with xawtv, you
-	have to zap using [sct]zap. If you want a nice application for
-	TV watching and record/playback, have a look at VDR.
-
-	If your card does not have a hardware MPEG decoder you need
-	a software MPEG decoder. Mplayer or xine are known to work.
-	Newsflash: MythTV also has DVB support now.
-	Note: Only very recent versions of Mplayer and xine can decode.
-	MPEG2 transport streams (TS) directly. Then, run
-	'[sct]zap channelname -r' in one xterm, and keep it running,
-	and start 'mplayer - < /dev/dvb/adapter0/dvr0' or
-	'xine stdin://mpeg2 < /dev/dvb/adapter0/dvr0' in a second xterm.
-	That's all far from perfect, but it seems no one has written
-	a nice DVB application which includes a builtin software MPEG
-	decoder yet.
-
-	Newsflash: Newest xine directly supports DVB. Just copy your
-	channels.conf to ~/.xine and start 'xine dvb://', or select
-	the DVB button in the xine GUI. Channel switching works using the
-	numpad pgup/pgdown (NP9 / NP3) keys to scroll through the channel osd
-	menu and pressing numpad-enter to switch to the selected channel.
-
-	Note: Older versions of xine and mplayer understand MPEG program
-	streams (PS) only, and can be used in conjunction with the
-	ts2ps tool from the Metzler Brother's dvb-mpegtools package.
-
-3. Which other DVB applications exist?
-
-	http://www.cadsoft.de/people/kls/vdr/
-		Klaus Schmidinger's Video Disk Recorder
-
-	http://www.metzlerbros.org/dvb/
-		Metzler Bros. DVB development; alternate drivers and
-		DVB utilities, include dvb-mpegtools and tuxzap.
-
-	http://sourceforge.net/projects/dvbtools/
-		Dave Chapman's dvbtools package, including
-		dvbstream and dvbtune
-
-	http://www.linuxdvb.tv/
-		Henning Holtschneider's site with many interesting
-		links and docs
-
-	http://www.dbox2.info/
-		LinuxDVB on the dBox2
-
-	http://www.tuxbox.org/ and http://cvs.tuxbox.org/
-		the TuxBox CVS many interesting DVB applications and the dBox2
-		DVB source
-
-	https://linuxtv.org/downloads
-		DVB Swiss Army Knife library and utilities
-
-	http://www.nenie.org/misc/mpsys/
-		MPSYS: a MPEG2 system library and tools
-
-	http://mplayerhq.hu/
-		mplayer
-
-	http://xine.sourceforge.net/ and http://xinehq.de/
-		xine
-
-	http://www.mythtv.org/
-		MythTV - analog TV PVR, but now with DVB support, too
-		(with software MPEG decode)
-
-	http://dvbsnoop.sourceforge.net/
-		DVB sniffer program to monitor, analyze, debug, dump
-		or view dvb/mpeg/dsm-cc/mhp stream information (TS,
-		PES, SECTION)
-
-4. Can't get a signal tuned correctly
-
-	If you are using a Technotrend/Hauppauge DVB-C card *without* analog
-	module, you might have to use module parameter adac=-1 (dvb-ttpci.o).
-
-5. The dvb_net device doesn't give me any packets at all
-
-	Run tcpdump on the dvb0_0 interface. This sets the interface
-	into promiscuous mode so it accepts any packets from the PID
-	you have configured with the dvbnet utility. Check if there
-	are any packets with the IP addr and MAC addr you have
-	configured with ifconfig.
-
-	If tcpdump doesn't give you any output, check the statistics
-	which ifconfig outputs. (Note: If the MAC address is wrong,
-	dvb_net won't get any input; thus you have to run tcpdump
-	before checking the statistics.) If there are no packets at
-	all then maybe the PID is wrong. If there are error packets,
-	then either the PID is wrong or the stream does not conform to
-	the MPE standard (EN 301 192, http://www.etsi.org/). You can
-	use e.g. dvbsnoop for debugging.
-
-6. The dvb_net device doesn't give me any multicast packets
-
-	Check your routes if they include the multicast address range.
-	Additionally make sure that "source validation by reversed path
-	lookup" is disabled:
-
-.. code-block:: none
-
-	  $ "echo 0 > /proc/sys/net/ipv4/conf/dvb0/rp_filter"
-
-7. What the hell are all those modules that need to be loaded?
-
-	For a dvb-ttpci av7110 based full-featured card the following
-	modules are loaded:
-
-	- videodev: Video4Linux core module. This is the base module that
-	  gives you access to the "analog" tv picture of the av7110 mpeg2
-	  decoder.
-
-	- v4l2-common: common functions for Video4Linux-2 drivers
-
-	- v4l1-compat: backward compatibility layer for Video4Linux-1 legacy
-	  applications
-
-	- dvb-core: DVB core module. This provides you with the
-	  /dev/dvb/adapter entries
-
-	- saa7146: SAA7146 core driver. This is need to access any SAA7146
-	  based card in your system.
-
-	- saa7146_vv: SAA7146 video and vbi functions. These are only needed
-	  for full-featured cards.
-
-	- videobuf-dma-sg: capture helper module for the saa7146_vv driver. This
-	  one is responsible to handle capture buffers.
-
-	- dvb-ttpci: The main driver for AV7110 based, full-featured
-	  DVB-S/C/T cards
-
diff --git a/Documentation/media/dvb-drivers/frontends.rst b/Documentation/media/dvb-drivers/frontends.rst
deleted file mode 100644
index 7b8336ece681..000000000000
--- a/Documentation/media/dvb-drivers/frontends.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-****************
-Frontend drivers
-****************
-
-Frontend attach headers
-***********************
-
-.. Keep it on alphabetic order
-
-.. kernel-doc:: drivers/media/dvb-frontends/a8293.h
-.. kernel-doc:: drivers/media/dvb-frontends/af9013.h
-.. kernel-doc:: drivers/media/dvb-frontends/ascot2e.h
-.. kernel-doc:: drivers/media/dvb-frontends/cxd2820r.h
-.. kernel-doc:: drivers/media/dvb-frontends/drxk.h
-.. kernel-doc:: drivers/media/dvb-frontends/dvb-pll.h
-.. kernel-doc:: drivers/media/dvb-frontends/helene.h
-.. kernel-doc:: drivers/media/dvb-frontends/horus3a.h
-.. kernel-doc:: drivers/media/dvb-frontends/ix2505v.h
-.. kernel-doc:: drivers/media/dvb-frontends/m88ds3103.h
-.. kernel-doc:: drivers/media/dvb-frontends/mb86a20s.h
-.. kernel-doc:: drivers/media/dvb-frontends/mn88472.h
-.. kernel-doc:: drivers/media/dvb-frontends/rtl2830.h
-.. kernel-doc:: drivers/media/dvb-frontends/rtl2832.h
-.. kernel-doc:: drivers/media/dvb-frontends/rtl2832_sdr.h
-.. kernel-doc:: drivers/media/dvb-frontends/stb6000.h
-.. kernel-doc:: drivers/media/dvb-frontends/tda10071.h
-.. kernel-doc:: drivers/media/dvb-frontends/tda826x.h
-.. kernel-doc:: drivers/media/dvb-frontends/zd1301_demod.h
-.. kernel-doc:: drivers/media/dvb-frontends/zl10036.h
-
diff --git a/Documentation/media/dvb-drivers/index.rst b/Documentation/media/dvb-drivers/index.rst
deleted file mode 100644
index 9d3fce544f85..000000000000
--- a/Documentation/media/dvb-drivers/index.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-##############################################
-Linux Digital TV driver-specific documentation
-##############################################
-
-**Copyright** |copy| 2001-2016 : LinuxTV Developers
-
-This documentation is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation version 2 of the License.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-more details.
-
-For more details see the file COPYING in the source distribution of Linux.
-
-.. only:: html
-
-   .. class:: toc-title
-
-	Table of Contents
-
-.. toctree::
-	:maxdepth: 5
-	:numbered:
-
-	intro
-	avermedia
-	bt8xx
-	cards
-	ci
-	dvb-usb
-	faq
-	lmedm04
-	opera-firmware
-	technisat
-	ttusb-dec
-	udev
-	frontends
-	contributors
diff --git a/Documentation/media/dvb-drivers/intro.rst b/Documentation/media/dvb-drivers/intro.rst
deleted file mode 100644
index 4e361bcc3ad4..000000000000
--- a/Documentation/media/dvb-drivers/intro.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Introduction
-============
-
-The main development site and GIT repository for these
-drivers is https://linuxtv.org.
-
-The DVB mailing list linux-dvb is hosted at vger. Please see
-http://vger.kernel.org/vger-lists.html#linux-media for details.
-
-There are also some other old lists hosted at https://linuxtv.org/lists.php. Please check the archive https://linuxtv.org/pipermail/linux-dvb/.
-
-The media subsystem Wiki is hosted at https://linuxtv.org/wiki/.
-Please check it before asking newbie questions on the list.
-
-API documentation is documented at the Kernel. You'll also find useful
-documentation at: https://linuxtv.org/docs.php.
-
-You may also find useful material at https://linuxtv.org/downloads/.
-
-In order to get firmware from proprietary drivers, there's a script at
-the kernel tree, at scripts/get_dvb_firmware.
diff --git a/Documentation/media/dvb-drivers/lmedm04.rst b/Documentation/media/dvb-drivers/lmedm04.rst
deleted file mode 100644
index a6ee33413748..000000000000
--- a/Documentation/media/dvb-drivers/lmedm04.rst
+++ /dev/null
@@ -1,107 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Firmware files for lmedm04 cards
-================================
-
-To extract firmware for the DM04/QQBOX you need to copy the
-following file(s) to this directory.
-
-For DM04+/QQBOX LME2510C (Sharp 7395 Tuner)
--------------------------------------------
-
-The Sharp 7395 driver can be found in windows/system32/drivers
-
-US2A0D.sys (dated 17 Mar 2009)
-
-
-and run:
-
-.. code-block:: none
-
-	scripts/get_dvb_firmware lme2510c_s7395
-
-will produce dvb-usb-lme2510c-s7395.fw
-
-An alternative but older firmware can be found on the driver
-disk DVB-S_EN_3.5A in BDADriver/driver
-
-LMEBDA_DVBS7395C.sys (dated 18 Jan 2008)
-
-and run:
-
-.. code-block:: none
-
-	./get_dvb_firmware lme2510c_s7395_old
-
-will produce dvb-usb-lme2510c-s7395.fw
-
-The LG firmware can be found on the driver
-disk DM04+_5.1A[LG] in BDADriver/driver
-
-For DM04 LME2510 (LG Tuner)
----------------------------
-
-LMEBDA_DVBS.sys (dated 13 Nov 2007)
-
-and run:
-
-
-.. code-block:: none
-
-	./get_dvb_firmware lme2510_lg
-
-will produce dvb-usb-lme2510-lg.fw
-
-
-Other LG firmware can be extracted manually from US280D.sys
-only found in windows/system32/drivers
-
-dd if=US280D.sys ibs=1 skip=42360 count=3924 of=dvb-usb-lme2510-lg.fw
-
-For DM04 LME2510C (LG Tuner)
-----------------------------
-
-.. code-block:: none
-
-	dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw
-
-
-The Sharp 0194 tuner driver can be found in windows/system32/drivers
-
-US290D.sys (dated 09 Apr 2009)
-
-For LME2510
------------
-
-.. code-block:: none
-
-	dd if=US290D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-s0194.fw
-
-
-For LME2510C
-------------
-
-
-.. code-block:: none
-
-	dd if=US290D.sys ibs=1 skip=33152 count=3697 of=dvb-usb-lme2510c-s0194.fw
-
-
-The m88rs2000 tuner driver can be found in windows/system32/drivers
-
-US2B0D.sys (dated 29 Jun 2010)
-
-
-.. code-block:: none
-
-	dd if=US2B0D.sys ibs=1 skip=34432 count=3871 of=dvb-usb-lme2510c-rs2000.fw
-
-We need to modify id of rs2000 firmware or it will warm boot id 3344:1120.
-
-
-.. code-block:: none
-
-
-	echo -ne \\xF0\\x22 | dd conv=notrunc bs=1 count=2 seek=266 of=dvb-usb-lme2510c-rs2000.fw
-
-Copy the firmware file(s) to /lib/firmware
diff --git a/Documentation/media/dvb-drivers/opera-firmware.rst b/Documentation/media/dvb-drivers/opera-firmware.rst
deleted file mode 100644
index fab3581551de..000000000000
--- a/Documentation/media/dvb-drivers/opera-firmware.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Opera firmware
-==============
-
-Author: Marco Gittler <g.marco@freenet.de>
-
-To extract the firmware for the Opera DVB-S1 USB-Box
-you need to copy the files:
-
-2830SCap2.sys
-2830SLoad2.sys
-
-from the windriver disk into this directory.
-
-Then run:
-
-.. code-block:: none
-
-	scripts/get_dvb_firmware opera1
-
-and after that you have 2 files:
-
-dvb-usb-opera-01.fw
-dvb-usb-opera1-fpga-01.fw
-
-in here.
-
-Copy them into /lib/firmware/ .
-
-After that the driver can load the firmware
-(if you have enabled firmware loading
-in kernel config and have hotplug running).
diff --git a/Documentation/media/dvb-drivers/technisat.rst b/Documentation/media/dvb-drivers/technisat.rst
deleted file mode 100644
index 9eaa12366bbf..000000000000
--- a/Documentation/media/dvb-drivers/technisat.rst
+++ /dev/null
@@ -1,100 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-How to set up the Technisat/B2C2 Flexcop devices
-================================================
-
-.. note::
-
-   This documentation is outdated.
-
-Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009
-
-Find out what device you have
------------------------------
-
-Important Notice: The driver does NOT support Technisat USB 2 devices!
-
-First start your linux box with a shipped kernel:
-
-.. code-block:: none
-
-	lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example:
-	02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
-	Technisat SkyStar2 DVB card (rev 02)
-
-	dmesg | grep frontend may show you for example:
-	DVB: registering frontend 0 (Conexant CX24123/CX24109)...
-
-Kernel compilation:
--------------------
-
-If the Flexcop / Technisat is the only DVB / TV / Radio device in your box
-get rid of unnecessary modules and check this one:
-
-``Multimedia support`` => ``Customise analog and hybrid tuner modules to build``
-
-In this directory uncheck every driver which is activated there
-(except ``Simple tuner support`` for ATSC 3rd generation only -> see case 9 please).
-
-Then please activate:
-
-- Main module part:
-
-  ``Multimedia support`` => ``DVB/ATSC adapters`` => ``Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters``
-
-  #) => ``Technisat/B2C2 Air/Sky/Cable2PC PCI`` (PCI card) or
-  #) => ``Technisat/B2C2 Air/Sky/Cable2PC USB`` (USB 1.1 adapter)
-     and for troubleshooting purposes:
-  #) => ``Enable debug for the B2C2 FlexCop drivers``
-
-- Frontend / Tuner / Demodulator module part:
-
-  ``Multimedia support`` => ``DVB/ATSC adapters``
-   => ``Customise the frontend modules to build`` ``Customise DVB frontends`` =>
-
-  - SkyStar DVB-S Revision 2.3:
-
-    #) => ``Zarlink VP310/MT312/ZL10313 based``
-    #) => ``Generic I2C PLL based tuners``
-
-  - SkyStar DVB-S Revision 2.6:
-
-    #) => ``ST STV0299 based``
-    #) => ``Generic I2C PLL based tuners``
-
-  - SkyStar DVB-S Revision 2.7:
-
-    #) => ``Samsung S5H1420 based``
-    #) => ``Integrant ITD1000 Zero IF tuner for DVB-S/DSS``
-    #) => ``ISL6421 SEC controller``
-
-  - SkyStar DVB-S Revision 2.8:
-
-    #) => ``Conexant CX24123 based``
-    #) => ``Conexant CX24113/CX24128 tuner for DVB-S/DSS``
-    #) => ``ISL6421 SEC controller``
-
-  - AirStar DVB-T card:
-
-    #) => ``Zarlink MT352 based``
-    #) => ``Generic I2C PLL based tuners``
-
-  - CableStar DVB-C card:
-
-    #) => ``ST STV0297 based``
-    #) => ``Generic I2C PLL based tuners``
-
-  - AirStar ATSC card 1st generation:
-
-    #) => ``Broadcom BCM3510``
-
-  - AirStar ATSC card 2nd generation:
-
-    #) => ``NxtWave Communications NXT2002/NXT2004 based``
-    #) => ``Generic I2C PLL based tuners``
-
-  - AirStar ATSC card 3rd generation:
-
-    #) => ``LG Electronics LGDT3302/LGDT3303 based``
-    #) ``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` => ``Simple tuner support``
-
diff --git a/Documentation/media/dvb-drivers/ttusb-dec.rst b/Documentation/media/dvb-drivers/ttusb-dec.rst
deleted file mode 100644
index 516bbab8a872..000000000000
--- a/Documentation/media/dvb-drivers/ttusb-dec.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-TechnoTrend/Hauppauge DEC USB Driver
-====================================
-
-Driver Status
--------------
-
-Supported:
-
-	- DEC2000-t
-	- DEC2450-t
-	- DEC3000-s
-	- Video Streaming
-	- Audio Streaming
-	- Section Filters
-	- Channel Zapping
-	- Hotplug firmware loader
-
-To Do:
-
-	- Tuner status information
-	- DVB network interface
-	- Streaming video PC->DEC
-	- Conax support for 2450-t
-
-Getting the Firmware
---------------------
-To download the firmware, use the following commands:
-
-.. code-block:: none
-
-	scripts/get_dvb_firmware dec2000t
-	scripts/get_dvb_firmware dec2540t
-	scripts/get_dvb_firmware dec3000s
-
-
-Hotplug Firmware Loading
-------------------------
-
-Since 2.6 kernels, the firmware is loaded at the point that the driver module
-is loaded.
-
-Copy the three files downloaded above into the /usr/lib/hotplug/firmware or
-/lib/firmware directory (depending on configuration of firmware hotplug).
diff --git a/Documentation/media/dvb-drivers/udev.rst b/Documentation/media/dvb-drivers/udev.rst
deleted file mode 100644
index ca6c9c226902..000000000000
--- a/Documentation/media/dvb-drivers/udev.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-UDEV rules for DVB
-==================
-
-.. note::
-
-   #) This documentation is outdated. Udev on modern distributions auto-detect
-      the DVB devices.
-
-   #) **TODO:** change this document to explain how to make DVB devices
-      persistent, as, when a machine has multiple devices, they may be detected
-      on different orders, which could cause apps that relies on the device
-      numbers to fail.
-
-The DVB subsystem currently registers to the sysfs subsystem using the
-"class_simple" interface.
-
-This means that only the basic information like module loading parameters
-are presented through sysfs. Other things that might be interesting are
-currently **not** available.
-
-Nevertheless it's now possible to add proper udev rules so that the
-DVB device nodes are created automatically.
-
-We assume that you have udev already up and running and that have been
-creating the DVB device nodes manually up to now due to the missing sysfs
-support.
-
-0. Don't forget to disable your current method of creating the
-device nodes manually.
-
-1. Unfortunately, you'll need a helper script to transform the kernel
-sysfs device name into the well known dvb adapter / device naming scheme.
-The script should be called "dvb.sh" and should be placed into a script
-dir where udev can execute it, most likely /etc/udev/scripts/
-
-So, create a new file /etc/udev/scripts/dvb.sh and add the following:
-
-.. code-block:: none
-
-	#!/bin/sh
-	/bin/echo $1 | /bin/sed -e 's,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\2\3,'
-
-Don't forget to make the script executable with "chmod".
-
-1. You need to create a proper udev rule that will create the device nodes
-like you know them. All real distributions out there scan the /etc/udev/rules.d
-directory for rule files. The main udev configuration file /etc/udev/udev.conf
-will tell you the directory where the rules are, most likely it's /etc/udev/rules.d/
-
-Create a new rule file in that directory called "dvb.rule" and add the following line:
-
-.. code-block:: none
-
-	KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c"
-
-If you want more control over the device nodes (for example a special group membership)
-have a look at "man udev".
-
-For every device that registers to the sysfs subsystem with a "dvb" prefix,
-the helper script /etc/udev/scripts/dvb.sh is invoked, which will then
-create the proper device node in your /dev/ directory.
diff --git a/Documentation/media/frontend.h.rst.exceptions b/Documentation/media/frontend.h.rst.exceptions
deleted file mode 100644
index 6283702c08c8..000000000000
--- a/Documentation/media/frontend.h.rst.exceptions
+++ /dev/null
@@ -1,214 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define _DVBFRONTEND_H_
-
-# Group layer A-C symbols together
-replace define DTV_ISDBT_LAYERA_FEC dtv-isdbt-layer-fec
-replace define DTV_ISDBT_LAYERB_FEC dtv-isdbt-layer-fec
-replace define DTV_ISDBT_LAYERC_FEC dtv-isdbt-layer-fec
-replace define DTV_ISDBT_LAYERA_MODULATION dtv-isdbt-layer-modulation
-replace define DTV_ISDBT_LAYERB_MODULATION dtv-isdbt-layer-modulation
-replace define DTV_ISDBT_LAYERC_MODULATION dtv-isdbt-layer-modulation
-replace define DTV_ISDBT_LAYERA_SEGMENT_COUNT dtv-isdbt-layer-segment-count
-replace define DTV_ISDBT_LAYERB_SEGMENT_COUNT dtv-isdbt-layer-segment-count
-replace define DTV_ISDBT_LAYERC_SEGMENT_COUNT dtv-isdbt-layer-segment-count
-replace define DTV_ISDBT_LAYERA_TIME_INTERLEAVING dtv-isdbt-layer-time-interleaving
-replace define DTV_ISDBT_LAYERB_TIME_INTERLEAVING dtv-isdbt-layer-time-interleaving
-replace define DTV_ISDBT_LAYERC_TIME_INTERLEAVING dtv-isdbt-layer-time-interleaving
-
-# Ignore legacy defines
-ignore define DTV_ISDBS_TS_ID_LEGACY
-ignore define SYS_DVBC_ANNEX_AC
-ignore define SYS_DMBTH
-
-# Ignore limits
-ignore define DTV_MAX_COMMAND
-ignore define MAX_DTV_STATS
-ignore define DTV_IOCTL_MAX_MSGS
-
-# the same reference is used for both get and set ioctls
-replace ioctl FE_SET_PROPERTY :c:type:`FE_GET_PROPERTY`
-
-# Typedefs that use the enum reference
-replace typedef fe_sec_voltage_t :c:type:`fe_sec_voltage`
-
-# Replaces for flag constants
-replace define FE_TUNE_MODE_ONESHOT :c:func:`FE_SET_FRONTEND_TUNE_MODE`
-replace define LNA_AUTO dtv-lna
-replace define NO_STREAM_ID_FILTER dtv-stream-id
-
-# Those enums are defined at the frontend.h header, and not externally
-
-ignore symbol FE_IS_STUPID
-ignore symbol FE_CAN_INVERSION_AUTO
-ignore symbol FE_CAN_FEC_1_2
-ignore symbol FE_CAN_FEC_2_3
-ignore symbol FE_CAN_FEC_3_4
-ignore symbol FE_CAN_FEC_4_5
-ignore symbol FE_CAN_FEC_5_6
-ignore symbol FE_CAN_FEC_6_7
-ignore symbol FE_CAN_FEC_7_8
-ignore symbol FE_CAN_FEC_8_9
-ignore symbol FE_CAN_FEC_AUTO
-ignore symbol FE_CAN_QPSK
-ignore symbol FE_CAN_QAM_16
-ignore symbol FE_CAN_QAM_32
-ignore symbol FE_CAN_QAM_64
-ignore symbol FE_CAN_QAM_128
-ignore symbol FE_CAN_QAM_256
-ignore symbol FE_CAN_QAM_AUTO
-ignore symbol FE_CAN_TRANSMISSION_MODE_AUTO
-ignore symbol FE_CAN_BANDWIDTH_AUTO
-ignore symbol FE_CAN_GUARD_INTERVAL_AUTO
-ignore symbol FE_CAN_HIERARCHY_AUTO
-ignore symbol FE_CAN_8VSB
-ignore symbol FE_CAN_16VSB
-ignore symbol FE_HAS_EXTENDED_CAPS
-ignore symbol FE_CAN_MULTISTREAM
-ignore symbol FE_CAN_TURBO_FEC
-ignore symbol FE_CAN_2G_MODULATION
-ignore symbol FE_NEEDS_BENDING
-ignore symbol FE_CAN_RECOVER
-ignore symbol FE_CAN_MUTE_TS
-
-ignore symbol QPSK
-ignore symbol QAM_16
-ignore symbol QAM_32
-ignore symbol QAM_64
-ignore symbol QAM_128
-ignore symbol QAM_256
-ignore symbol QAM_AUTO
-ignore symbol VSB_8
-ignore symbol VSB_16
-ignore symbol PSK_8
-ignore symbol APSK_16
-ignore symbol APSK_32
-ignore symbol DQPSK
-ignore symbol QAM_4_NR
-
-ignore symbol SEC_VOLTAGE_13
-ignore symbol SEC_VOLTAGE_18
-ignore symbol SEC_VOLTAGE_OFF
-
-ignore symbol SEC_TONE_ON
-ignore symbol SEC_TONE_OFF
-
-ignore symbol SEC_MINI_A
-ignore symbol SEC_MINI_B
-
-ignore symbol FE_NONE
-ignore symbol FE_HAS_SIGNAL
-ignore symbol FE_HAS_CARRIER
-ignore symbol FE_HAS_VITERBI
-ignore symbol FE_HAS_SYNC
-ignore symbol FE_HAS_LOCK
-ignore symbol FE_REINIT
-ignore symbol FE_TIMEDOUT
-
-ignore symbol FEC_NONE
-ignore symbol FEC_1_2
-ignore symbol FEC_2_3
-ignore symbol FEC_3_4
-ignore symbol FEC_4_5
-ignore symbol FEC_5_6
-ignore symbol FEC_6_7
-ignore symbol FEC_7_8
-ignore symbol FEC_8_9
-ignore symbol FEC_AUTO
-ignore symbol FEC_3_5
-ignore symbol FEC_9_10
-ignore symbol FEC_2_5
-
-ignore symbol TRANSMISSION_MODE_AUTO
-ignore symbol TRANSMISSION_MODE_1K
-ignore symbol TRANSMISSION_MODE_2K
-ignore symbol TRANSMISSION_MODE_8K
-ignore symbol TRANSMISSION_MODE_4K
-ignore symbol TRANSMISSION_MODE_16K
-ignore symbol TRANSMISSION_MODE_32K
-ignore symbol TRANSMISSION_MODE_C1
-ignore symbol TRANSMISSION_MODE_C3780
-ignore symbol TRANSMISSION_MODE_2K
-ignore symbol TRANSMISSION_MODE_8K
-
-ignore symbol GUARD_INTERVAL_AUTO
-ignore symbol GUARD_INTERVAL_1_128
-ignore symbol GUARD_INTERVAL_1_32
-ignore symbol GUARD_INTERVAL_1_16
-ignore symbol GUARD_INTERVAL_1_8
-ignore symbol GUARD_INTERVAL_1_4
-ignore symbol GUARD_INTERVAL_19_128
-ignore symbol GUARD_INTERVAL_19_256
-ignore symbol GUARD_INTERVAL_PN420
-ignore symbol GUARD_INTERVAL_PN595
-ignore symbol GUARD_INTERVAL_PN945
-
-ignore symbol HIERARCHY_NONE
-ignore symbol HIERARCHY_AUTO
-ignore symbol HIERARCHY_1
-ignore symbol HIERARCHY_2
-ignore symbol HIERARCHY_4
-
-ignore symbol INTERLEAVING_NONE
-ignore symbol INTERLEAVING_AUTO
-ignore symbol INTERLEAVING_240
-ignore symbol INTERLEAVING_720
-
-ignore symbol PILOT_ON
-ignore symbol PILOT_OFF
-ignore symbol PILOT_AUTO
-
-ignore symbol ROLLOFF_35
-ignore symbol ROLLOFF_20
-ignore symbol ROLLOFF_25
-ignore symbol ROLLOFF_AUTO
-
-ignore symbol INVERSION_ON
-ignore symbol INVERSION_OFF
-ignore symbol INVERSION_AUTO
-
-ignore symbol SYS_UNDEFINED
-ignore symbol SYS_DVBC_ANNEX_A
-ignore symbol SYS_DVBC_ANNEX_B
-ignore symbol SYS_DVBC_ANNEX_C
-ignore symbol SYS_ISDBC
-ignore symbol SYS_DVBT
-ignore symbol SYS_DVBT2
-ignore symbol SYS_ISDBT
-ignore symbol SYS_ATSC
-ignore symbol SYS_ATSCMH
-ignore symbol SYS_DTMB
-ignore symbol SYS_DVBS
-ignore symbol SYS_DVBS2
-ignore symbol SYS_TURBO
-ignore symbol SYS_ISDBS
-ignore symbol SYS_DAB
-ignore symbol SYS_DSS
-ignore symbol SYS_CMMB
-ignore symbol SYS_DVBH
-
-ignore symbol ATSCMH_SCCC_BLK_SEP
-ignore symbol ATSCMH_SCCC_BLK_COMB
-ignore symbol ATSCMH_SCCC_BLK_RES
-
-ignore symbol ATSCMH_SCCC_CODE_HLF
-ignore symbol ATSCMH_SCCC_CODE_QTR
-ignore symbol ATSCMH_SCCC_CODE_RES
-
-ignore symbol ATSCMH_RSFRAME_ENS_PRI
-ignore symbol ATSCMH_RSFRAME_ENS_SEC
-
-ignore symbol ATSCMH_RSFRAME_PRI_ONLY
-ignore symbol ATSCMH_RSFRAME_PRI_SEC
-ignore symbol ATSCMH_RSFRAME_RES
-
-ignore symbol ATSCMH_RSCODE_211_187
-ignore symbol ATSCMH_RSCODE_223_187
-ignore symbol ATSCMH_RSCODE_235_187
-ignore symbol ATSCMH_RSCODE_RES
-
-ignore symbol FE_SCALE_NOT_AVAILABLE
-ignore symbol FE_SCALE_DECIBEL
-ignore symbol FE_SCALE_RELATIVE
-ignore symbol FE_SCALE_COUNTER
diff --git a/Documentation/media/index.rst b/Documentation/media/index.rst
deleted file mode 100644
index 0301c25ff887..000000000000
--- a/Documentation/media/index.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Linux Media Subsystem Documentation
-===================================
-
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-   :maxdepth: 2
-
-   media_uapi
-   media_kapi
-   dvb-drivers/index
-   v4l-drivers/index
-   cec-drivers/index
-
-.. only:: html and subproject
-
-   Indices
-   =======
-
-   * :ref:`genindex`
diff --git a/Documentation/media/intro.rst b/Documentation/media/intro.rst
deleted file mode 100644
index 4a6bd665b884..000000000000
--- a/Documentation/media/intro.rst
+++ /dev/null
@@ -1,46 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-============
-Introduction
-============
-
-This document covers the Linux Kernel to Userspace API's used by video
-and radio streaming devices, including video cameras, analog and digital
-TV receiver cards, AM/FM receiver cards, Software Defined Radio (SDR),
-streaming capture and output devices, codec devices and remote controllers.
-
-A typical media device hardware is shown at :ref:`typical_media_device`.
-
-.. _typical_media_device:
-
-.. kernel-figure:: typical_media_device.svg
-    :alt:   typical_media_device.svg
-    :align: center
-
-    Typical Media Device
-
-The media infrastructure API was designed to control such devices. It is
-divided into five parts.
-
-1. The :ref:`first part <v4l2spec>` covers radio, video capture and output,
-   cameras, analog TV devices and codecs.
-
-2. The :ref:`second part <dvbapi>` covers the API used for digital TV and
-   Internet reception via one of the several digital tv standards. While it is
-   called as DVB API, in fact it covers several different video standards
-   including DVB-T/T2, DVB-S/S2, DVB-C, ATSC, ISDB-T, ISDB-S, DTMB, etc. The
-   complete list of supported standards can be found at
-   :c:type:`fe_delivery_system`.
-
-3. The :ref:`third part <remote_controllers>` covers the Remote Controller API.
-
-4. The :ref:`fourth part <media_controller>` covers the Media Controller API.
-
-5. The :ref:`fifth part <cec>` covers the CEC (Consumer Electronics Control) API.
-
-It should also be noted that a media device may also have audio components, like
-mixers, PCM capture, PCM playback, etc, which are controlled via ALSA API.  For
-additional information and for the latest development code, see:
-`https://linuxtv.org <https://linuxtv.org>`__.  For discussing improvements,
-reporting troubles, sending new drivers, etc, please mail to: `Linux Media
-Mailing List (LMML) <http://vger.kernel.org/vger-lists.html#linux-media>`__.
diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst
deleted file mode 100644
index 3ce26b7c2b2b..000000000000
--- a/Documentation/media/kapi/cec-core.rst
+++ /dev/null
@@ -1,474 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-CEC Kernel Support
-==================
-
-The CEC framework provides a unified kernel interface for use with HDMI CEC
-hardware. It is designed to handle a multiple types of hardware (receivers,
-transmitters, USB dongles). The framework also gives the option to decide
-what to do in the kernel driver and what should be handled by userspace
-applications. In addition it integrates the remote control passthrough
-feature into the kernel's remote control framework.
-
-
-The CEC Protocol
-----------------
-
-The CEC protocol enables consumer electronic devices to communicate with each
-other through the HDMI connection. The protocol uses logical addresses in the
-communication. The logical address is strictly connected with the functionality
-provided by the device. The TV acting as the communication hub is always
-assigned address 0. The physical address is determined by the physical
-connection between devices.
-
-The CEC framework described here is up to date with the CEC 2.0 specification.
-It is documented in the HDMI 1.4 specification with the new 2.0 bits documented
-in the HDMI 2.0 specification. But for most of the features the freely available
-HDMI 1.3a specification is sufficient:
-
-http://www.microprocessor.org/HDMISpecification13a.pdf
-
-
-CEC Adapter Interface
----------------------
-
-The struct cec_adapter represents the CEC adapter hardware. It is created by
-calling cec_allocate_adapter() and deleted by calling cec_delete_adapter():
-
-.. c:function::
-   struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv,
-   const char *name, u32 caps, u8 available_las);
-
-.. c:function::
-   void cec_delete_adapter(struct cec_adapter *adap);
-
-To create an adapter you need to pass the following information:
-
-ops:
-	adapter operations which are called by the CEC framework and that you
-	have to implement.
-
-priv:
-	will be stored in adap->priv and can be used by the adapter ops.
-	Use cec_get_drvdata(adap) to get the priv pointer.
-
-name:
-	the name of the CEC adapter. Note: this name will be copied.
-
-caps:
-	capabilities of the CEC adapter. These capabilities determine the
-	capabilities of the hardware and which parts are to be handled
-	by userspace and which parts are handled by kernelspace. The
-	capabilities are returned by CEC_ADAP_G_CAPS.
-
-available_las:
-	the number of simultaneous logical addresses that this
-	adapter can handle. Must be 1 <= available_las <= CEC_MAX_LOG_ADDRS.
-
-To obtain the priv pointer use this helper function:
-
-.. c:function::
-	void *cec_get_drvdata(const struct cec_adapter *adap);
-
-To register the /dev/cecX device node and the remote control device (if
-CEC_CAP_RC is set) you call:
-
-.. c:function::
-	int cec_register_adapter(struct cec_adapter *adap, struct device *parent);
-
-where parent is the parent device.
-
-To unregister the devices call:
-
-.. c:function::
-	void cec_unregister_adapter(struct cec_adapter *adap);
-
-Note: if cec_register_adapter() fails, then call cec_delete_adapter() to
-clean up. But if cec_register_adapter() succeeded, then only call
-cec_unregister_adapter() to clean up, never cec_delete_adapter(). The
-unregister function will delete the adapter automatically once the last user
-of that /dev/cecX device has closed its file handle.
-
-
-Implementing the Low-Level CEC Adapter
---------------------------------------
-
-The following low-level adapter operations have to be implemented in
-your driver:
-
-.. c:type:: struct cec_adap_ops
-
-.. code-block:: none
-
-	struct cec_adap_ops
-	{
-		/* Low-level callbacks */
-		int (*adap_enable)(struct cec_adapter *adap, bool enable);
-		int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable);
-		int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable);
-		int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
-		int (*adap_transmit)(struct cec_adapter *adap, u8 attempts,
-				      u32 signal_free_time, struct cec_msg *msg);
-		void (*adap_status)(struct cec_adapter *adap, struct seq_file *file);
-		void (*adap_free)(struct cec_adapter *adap);
-
-		/* Error injection callbacks */
-		...
-
-		/* High-level callbacks */
-		...
-	};
-
-The seven low-level ops deal with various aspects of controlling the CEC adapter
-hardware:
-
-
-To enable/disable the hardware:
-
-.. c:function::
-	int (*adap_enable)(struct cec_adapter *adap, bool enable);
-
-This callback enables or disables the CEC hardware. Enabling the CEC hardware
-means powering it up in a state where no logical addresses are claimed. This
-op assumes that the physical address (adap->phys_addr) is valid when enable is
-true and will not change while the CEC adapter remains enabled. The initial
-state of the CEC adapter after calling cec_allocate_adapter() is disabled.
-
-Note that adap_enable must return 0 if enable is false.
-
-
-To enable/disable the 'monitor all' mode:
-
-.. c:function::
-	int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable);
-
-If enabled, then the adapter should be put in a mode to also monitor messages
-that not for us. Not all hardware supports this and this function is only
-called if the CEC_CAP_MONITOR_ALL capability is set. This callback is optional
-(some hardware may always be in 'monitor all' mode).
-
-Note that adap_monitor_all_enable must return 0 if enable is false.
-
-
-To enable/disable the 'monitor pin' mode:
-
-.. c:function::
-	int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable);
-
-If enabled, then the adapter should be put in a mode to also monitor CEC pin
-changes. Not all hardware supports this and this function is only called if
-the CEC_CAP_MONITOR_PIN capability is set. This callback is optional
-(some hardware may always be in 'monitor pin' mode).
-
-Note that adap_monitor_pin_enable must return 0 if enable is false.
-
-
-To program a new logical address:
-
-.. c:function::
-	int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
-
-If logical_addr == CEC_LOG_ADDR_INVALID then all programmed logical addresses
-are to be erased. Otherwise the given logical address should be programmed.
-If the maximum number of available logical addresses is exceeded, then it
-should return -ENXIO. Once a logical address is programmed the CEC hardware
-can receive directed messages to that address.
-
-Note that adap_log_addr must return 0 if logical_addr is CEC_LOG_ADDR_INVALID.
-
-
-To transmit a new message:
-
-.. c:function::
-	int (*adap_transmit)(struct cec_adapter *adap, u8 attempts,
-			     u32 signal_free_time, struct cec_msg *msg);
-
-This transmits a new message. The attempts argument is the suggested number of
-attempts for the transmit.
-
-The signal_free_time is the number of data bit periods that the adapter should
-wait when the line is free before attempting to send a message. This value
-depends on whether this transmit is a retry, a message from a new initiator or
-a new message for the same initiator. Most hardware will handle this
-automatically, but in some cases this information is needed.
-
-The CEC_FREE_TIME_TO_USEC macro can be used to convert signal_free_time to
-microseconds (one data bit period is 2.4 ms).
-
-
-To log the current CEC hardware status:
-
-.. c:function::
-	void (*adap_status)(struct cec_adapter *adap, struct seq_file *file);
-
-This optional callback can be used to show the status of the CEC hardware.
-The status is available through debugfs: cat /sys/kernel/debug/cec/cecX/status
-
-To free any resources when the adapter is deleted:
-
-.. c:function::
-	void (*adap_free)(struct cec_adapter *adap);
-
-This optional callback can be used to free any resources that might have been
-allocated by the driver. It's called from cec_delete_adapter.
-
-
-Your adapter driver will also have to react to events (typically interrupt
-driven) by calling into the framework in the following situations:
-
-When a transmit finished (successfully or otherwise):
-
-.. c:function::
-	void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt,
-		       u8 nack_cnt, u8 low_drive_cnt, u8 error_cnt);
-
-or:
-
-.. c:function::
-	void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status);
-
-The status can be one of:
-
-CEC_TX_STATUS_OK:
-	the transmit was successful.
-
-CEC_TX_STATUS_ARB_LOST:
-	arbitration was lost: another CEC initiator
-	took control of the CEC line and you lost the arbitration.
-
-CEC_TX_STATUS_NACK:
-	the message was nacked (for a directed message) or
-	acked (for a broadcast message). A retransmission is needed.
-
-CEC_TX_STATUS_LOW_DRIVE:
-	low drive was detected on the CEC bus. This indicates that
-	a follower detected an error on the bus and requested a
-	retransmission.
-
-CEC_TX_STATUS_ERROR:
-	some unspecified error occurred: this can be one of ARB_LOST
-	or LOW_DRIVE if the hardware cannot differentiate or something
-	else entirely. Some hardware only supports OK and FAIL as the
-	result of a transmit, i.e. there is no way to differentiate
-	between the different possible errors. In that case map FAIL
-	to CEC_TX_STATUS_NACK and not to CEC_TX_STATUS_ERROR.
-
-CEC_TX_STATUS_MAX_RETRIES:
-	could not transmit the message after trying multiple times.
-	Should only be set by the driver if it has hardware support for
-	retrying messages. If set, then the framework assumes that it
-	doesn't have to make another attempt to transmit the message
-	since the hardware did that already.
-
-The hardware must be able to differentiate between OK, NACK and 'something
-else'.
-
-The \*_cnt arguments are the number of error conditions that were seen.
-This may be 0 if no information is available. Drivers that do not support
-hardware retry can just set the counter corresponding to the transmit error
-to 1, if the hardware does support retry then either set these counters to
-0 if the hardware provides no feedback of which errors occurred and how many
-times, or fill in the correct values as reported by the hardware.
-
-Be aware that calling these functions can immediately start a new transmit
-if there is one pending in the queue. So make sure that the hardware is in
-a state where new transmits can be started *before* calling these functions.
-
-The cec_transmit_attempt_done() function is a helper for cases where the
-hardware never retries, so the transmit is always for just a single
-attempt. It will call cec_transmit_done() in turn, filling in 1 for the
-count argument corresponding to the status. Or all 0 if the status was OK.
-
-When a CEC message was received:
-
-.. c:function::
-	void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg);
-
-Speaks for itself.
-
-Implementing the interrupt handler
-----------------------------------
-
-Typically the CEC hardware provides interrupts that signal when a transmit
-finished and whether it was successful or not, and it provides and interrupt
-when a CEC message was received.
-
-The CEC driver should always process the transmit interrupts first before
-handling the receive interrupt. The framework expects to see the cec_transmit_done
-call before the cec_received_msg call, otherwise it can get confused if the
-received message was in reply to the transmitted message.
-
-Optional: Implementing Error Injection Support
-----------------------------------------------
-
-If the CEC adapter supports Error Injection functionality, then that can
-be exposed through the Error Injection callbacks:
-
-.. code-block:: none
-
-	struct cec_adap_ops {
-		/* Low-level callbacks */
-		...
-
-		/* Error injection callbacks */
-		int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf);
-		bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line);
-
-		/* High-level CEC message callback */
-		...
-	};
-
-If both callbacks are set, then an ``error-inj`` file will appear in debugfs.
-The basic syntax is as follows:
-
-Leading spaces/tabs are ignored. If the next character is a ``#`` or the end of the
-line was reached, then the whole line is ignored. Otherwise a command is expected.
-
-This basic parsing is done in the CEC Framework. It is up to the driver to decide
-what commands to implement. The only requirement is that the command ``clear`` without
-any arguments must be implemented and that it will remove all current error injection
-commands.
-
-This ensures that you can always do ``echo clear >error-inj`` to clear any error
-injections without having to know the details of the driver-specific commands.
-
-Note that the output of ``error-inj`` shall be valid as input to ``error-inj``.
-So this must work:
-
-.. code-block:: none
-
-	$ cat error-inj >einj.txt
-	$ cat einj.txt >error-inj
-
-The first callback is called when this file is read and it should show the
-the current error injection state:
-
-.. c:function::
-	int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf);
-
-It is recommended that it starts with a comment block with basic usage
-information. It returns 0 for success and an error otherwise.
-
-The second callback will parse commands written to the ``error-inj`` file:
-
-.. c:function::
-	bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line);
-
-The ``line`` argument points to the start of the command. Any leading
-spaces or tabs have already been skipped. It is a single line only (so there
-are no embedded newlines) and it is 0-terminated. The callback is free to
-modify the contents of the buffer. It is only called for lines containing a
-command, so this callback is never called for empty lines or comment lines.
-
-Return true if the command was valid or false if there were syntax errors.
-
-Implementing the High-Level CEC Adapter
----------------------------------------
-
-The low-level operations drive the hardware, the high-level operations are
-CEC protocol driven. The following high-level callbacks are available:
-
-.. code-block:: none
-
-	struct cec_adap_ops {
-		/* Low-level callbacks */
-		...
-
-		/* Error injection callbacks */
-		...
-
-		/* High-level CEC message callback */
-		int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
-	};
-
-The received() callback allows the driver to optionally handle a newly
-received CEC message
-
-.. c:function::
-	int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
-
-If the driver wants to process a CEC message, then it can implement this
-callback. If it doesn't want to handle this message, then it should return
--ENOMSG, otherwise the CEC framework assumes it processed this message and
-it will not do anything with it.
-
-
-CEC framework functions
------------------------
-
-CEC Adapter drivers can call the following CEC framework functions:
-
-.. c:function::
-	int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
-			     bool block);
-
-Transmit a CEC message. If block is true, then wait until the message has been
-transmitted, otherwise just queue it and return.
-
-.. c:function::
-	void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr,
-			     bool block);
-
-Change the physical address. This function will set adap->phys_addr and
-send an event if it has changed. If cec_s_log_addrs() has been called and
-the physical address has become valid, then the CEC framework will start
-claiming the logical addresses. If block is true, then this function won't
-return until this process has finished.
-
-When the physical address is set to a valid value the CEC adapter will
-be enabled (see the adap_enable op). When it is set to CEC_PHYS_ADDR_INVALID,
-then the CEC adapter will be disabled. If you change a valid physical address
-to another valid physical address, then this function will first set the
-address to CEC_PHYS_ADDR_INVALID before enabling the new physical address.
-
-.. c:function::
-	void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
-				       const struct edid *edid);
-
-A helper function that extracts the physical address from the edid struct
-and calls cec_s_phys_addr() with that address, or CEC_PHYS_ADDR_INVALID
-if the EDID did not contain a physical address or edid was a NULL pointer.
-
-.. c:function::
-	int cec_s_log_addrs(struct cec_adapter *adap,
-			    struct cec_log_addrs *log_addrs, bool block);
-
-Claim the CEC logical addresses. Should never be called if CEC_CAP_LOG_ADDRS
-is set. If block is true, then wait until the logical addresses have been
-claimed, otherwise just queue it and return. To unconfigure all logical
-addresses call this function with log_addrs set to NULL or with
-log_addrs->num_log_addrs set to 0. The block argument is ignored when
-unconfiguring. This function will just return if the physical address is
-invalid. Once the physical address becomes valid, then the framework will
-attempt to claim these logical addresses.
-
-CEC Pin framework
------------------
-
-Most CEC hardware operates on full CEC messages where the software provides
-the message and the hardware handles the low-level CEC protocol. But some
-hardware only drives the CEC pin and software has to handle the low-level
-CEC protocol. The CEC pin framework was created to handle such devices.
-
-Note that due to the close-to-realtime requirements it can never be guaranteed
-to work 100%. This framework uses highres timers internally, but if a
-timer goes off too late by more than 300 microseconds wrong results can
-occur. In reality it appears to be fairly reliable.
-
-One advantage of this low-level implementation is that it can be used as
-a cheap CEC analyser, especially if interrupts can be used to detect
-CEC pin transitions from low to high or vice versa.
-
-.. kernel-doc:: include/media/cec-pin.h
-
-CEC Notifier framework
-----------------------
-
-Most drm HDMI implementations have an integrated CEC implementation and no
-notifier support is needed. But some have independent CEC implementations
-that have their own driver. This could be an IP block for an SoC or a
-completely separate chip that deals with the CEC pin. For those cases a
-drm driver can install a notifier and use the notifier to inform the
-CEC driver about changes in the physical address.
-
-.. kernel-doc:: include/media/cec-notifier.h
diff --git a/Documentation/media/kapi/csi2.rst b/Documentation/media/kapi/csi2.rst
deleted file mode 100644
index e111ff7bfd3d..000000000000
--- a/Documentation/media/kapi/csi2.rst
+++ /dev/null
@@ -1,85 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-MIPI CSI-2
-==========
-
-CSI-2 is a data bus intended for transferring images from cameras to
-the host SoC. It is defined by the `MIPI alliance`_.
-
-.. _`MIPI alliance`: http://www.mipi.org/
-
-Transmitter drivers
--------------------
-
-CSI-2 transmitter, such as a sensor or a TV tuner, drivers need to
-provide the CSI-2 receiver with information on the CSI-2 bus
-configuration. These include the V4L2_CID_LINK_FREQ and
-V4L2_CID_PIXEL_RATE controls and
-(:c:type:`v4l2_subdev_video_ops`->s_stream() callback). These
-interface elements must be present on the sub-device represents the
-CSI-2 transmitter.
-
-The V4L2_CID_LINK_FREQ control is used to tell the receiver driver the
-frequency (and not the symbol rate) of the link. The
-V4L2_CID_PIXEL_RATE is may be used by the receiver to obtain the pixel
-rate the transmitter uses. The
-:c:type:`v4l2_subdev_video_ops`->s_stream() callback provides an
-ability to start and stop the stream.
-
-The value of the V4L2_CID_PIXEL_RATE is calculated as follows::
-
-	pixel_rate = link_freq * 2 * nr_of_lanes / bits_per_sample
-
-where
-
-.. list-table:: variables in pixel rate calculation
-   :header-rows: 1
-
-   * - variable or constant
-     - description
-   * - link_freq
-     - The value of the V4L2_CID_LINK_FREQ integer64 menu item.
-   * - nr_of_lanes
-     - Number of data lanes used on the CSI-2 link. This can
-       be obtained from the OF endpoint configuration.
-   * - 2
-     - Two bits are transferred per clock cycle per lane.
-   * - bits_per_sample
-     - Number of bits per sample.
-
-The transmitter drivers must, if possible, configure the CSI-2
-transmitter to *LP-11 mode* whenever the transmitter is powered on but
-not active, and maintain *LP-11 mode* until stream on. Only at stream
-on should the transmitter activate the clock on the clock lane and
-transition to *HS mode*.
-
-Some transmitters do this automatically but some have to be explicitly
-programmed to do so, and some are unable to do so altogether due to
-hardware constraints.
-
-Stopping the transmitter
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-A transmitter stops sending the stream of images as a result of
-calling the ``.s_stream()`` callback. Some transmitters may stop the
-stream at a frame boundary whereas others stop immediately,
-effectively leaving the current frame unfinished. The receiver driver
-should not make assumptions either way, but function properly in both
-cases.
-
-Receiver drivers
-----------------
-
-Before the receiver driver may enable the CSI-2 transmitter by using
-the :c:type:`v4l2_subdev_video_ops`->s_stream(), it must have powered
-the transmitter up by using the
-:c:type:`v4l2_subdev_core_ops`->s_power() callback. This may take
-place either indirectly by using :c:func:`v4l2_pipeline_pm_get` or
-directly.
-
-Formats
--------
-
-The media bus pixel codes document parallel formats. Should the pixel data be
-transported over a serial bus, the media bus pixel code that describes a
-parallel format that transfers a sample on a single clock cycle is used.
diff --git a/Documentation/media/kapi/dtv-ca.rst b/Documentation/media/kapi/dtv-ca.rst
deleted file mode 100644
index 8a09862b428b..000000000000
--- a/Documentation/media/kapi/dtv-ca.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Digital TV Conditional Access kABI
-----------------------------------
-
-.. kernel-doc:: include/media/dvb_ca_en50221.h
diff --git a/Documentation/media/kapi/dtv-common.rst b/Documentation/media/kapi/dtv-common.rst
deleted file mode 100644
index f8b2c4dc8170..000000000000
--- a/Documentation/media/kapi/dtv-common.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Digital TV Common functions
----------------------------
-
-Math functions
-~~~~~~~~~~~~~~
-
-Provide some commonly-used math functions, usually required in order to
-estimate signal strength and signal to noise measurements in dB.
-
-.. kernel-doc:: include/media/dvb_math.h
-
-
-DVB devices
-~~~~~~~~~~~
-
-Those functions are responsible for handling the DVB device nodes.
-
-.. kernel-doc:: include/media/dvbdev.h
-
-Digital TV Ring buffer
-~~~~~~~~~~~~~~~~~~~~~~
-
-Those routines implement ring buffers used to handle digital TV data and
-copy it from/to userspace.
-
-.. note::
-
-  1) For performance reasons read and write routines don't check buffer sizes
-     and/or number of bytes free/available. This has to be done before these
-     routines are called. For example:
-
-   .. code-block:: c
-
-        /* write @buflen: bytes */
-        free = dvb_ringbuffer_free(rbuf);
-        if (free >= buflen)
-                count = dvb_ringbuffer_write(rbuf, buffer, buflen);
-        else
-                /* do something */
-
-        /* read min. 1000, max. @bufsize: bytes */
-        avail = dvb_ringbuffer_avail(rbuf);
-        if (avail >= 1000)
-                count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize));
-        else
-                /* do something */
-
-  2) If there is exactly one reader and one writer, there is no need
-     to lock read or write operations.
-     Two or more readers must be locked against each other.
-     Flushing the buffer counts as a read operation.
-     Resetting the buffer counts as a read and write operation.
-     Two or more writers must be locked against each other.
-
-.. kernel-doc:: include/media/dvb_ringbuffer.h
-
-Digital TV VB2 handler
-~~~~~~~~~~~~~~~~~~~~~~
-
-.. kernel-doc:: include/media/dvb_vb2.h
diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst
deleted file mode 100644
index 82c5b85ed9b1..000000000000
--- a/Documentation/media/kapi/dtv-core.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Digital TV (DVB) devices
-------------------------
-
-Digital TV devices are implemented by several different drivers:
-
-- A bridge driver that is responsible to talk with the bus where the other
-  devices are connected (PCI, USB, SPI), bind to the other drivers and
-  implement the digital demux logic (either in software or in hardware);
-
-- Frontend drivers that are usually implemented as two separate drivers:
-
-  - A tuner driver that implements the logic which commands the part of
-    the hardware responsible for tuning into a digital TV transponder or
-    physical channel. The output of a tuner is usually a baseband or
-    Intermediate Frequency (IF) signal;
-
-  - A demodulator driver (a.k.a "demod") that implements the logic which
-    commands the digital TV decoding hardware. The output of a demod is
-    a digital stream, with multiple audio, video and data channels typically
-    multiplexed using MPEG Transport Stream [#f1]_.
-
-On most hardware, the frontend drivers talk with the bridge driver using an
-I2C bus.
-
-.. [#f1] Some standards use TCP/IP for multiplexing data, like DVB-H (an
-   abandoned standard, not used anymore) and ATSC version 3.0 current
-   proposals. Currently, the DVB subsystem doesn't implement those standards.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    dtv-common
-    dtv-frontend
-    dtv-demux
-    dtv-ca
-    dtv-net
diff --git a/Documentation/media/kapi/dtv-demux.rst b/Documentation/media/kapi/dtv-demux.rst
deleted file mode 100644
index c0ae5dec5328..000000000000
--- a/Documentation/media/kapi/dtv-demux.rst
+++ /dev/null
@@ -1,84 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Digital TV Demux kABI
----------------------
-
-Digital TV Demux
-~~~~~~~~~~~~~~~~
-
-The Kernel Digital TV Demux kABI defines a driver-internal interface for
-registering low-level, hardware specific driver to a hardware independent
-demux layer. It is only of interest for Digital TV device driver writers.
-The header file for this kABI is named ``demux.h`` and located in
-``include/media``.
-
-The demux kABI should be implemented for each demux in the system. It is
-used to select the TS source of a demux and to manage the demux resources.
-When the demux client allocates a resource via the demux kABI, it receives
-a pointer to the kABI of that resource.
-
-Each demux receives its TS input from a DVB front-end or from memory, as
-set via this demux kABI. In a system with more than one front-end, the kABI
-can be used to select one of the DVB front-ends as a TS source for a demux,
-unless this is fixed in the HW platform.
-
-The demux kABI only controls front-ends regarding to their connections with
-demuxes; the kABI used to set the other front-end parameters, such as
-tuning, are devined via the Digital TV Frontend kABI.
-
-The functions that implement the abstract interface demux should be defined
-static or module private and registered to the Demux core for external
-access. It is not necessary to implement every function in the struct
-:c:type:`dmx_demux`. For example, a demux interface might support Section filtering,
-but not PES filtering. The kABI client is expected to check the value of any
-function pointer before calling the function: the value of ``NULL`` means
-that the function is not available.
-
-Whenever the functions of the demux API modify shared data, the
-possibilities of lost update and race condition problems should be
-addressed, e.g. by protecting parts of code with mutexes.
-
-Note that functions called from a bottom half context must not sleep.
-Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a
-kernel thread being put to sleep if swapping is needed. For example, the
-Linux Kernel calls the functions of a network device interface from a
-bottom half context. Thus, if a demux kABI function is called from network
-device code, the function must not sleep.
-
-Demux Callback API
-~~~~~~~~~~~~~~~~~~
-
-This kernel-space API comprises the callback functions that deliver filtered
-data to the demux client. Unlike the other DVB kABIs, these functions are
-provided by the client and called from the demux code.
-
-The function pointers of this abstract interface are not packed into a
-structure as in the other demux APIs, because the callback functions are
-registered and used independent of each other. As an example, it is possible
-for the API client to provide several callback functions for receiving TS
-packets and no callbacks for PES packets or sections.
-
-The functions that implement the callback API need not be re-entrant: when
-a demux driver calls one of these functions, the driver is not allowed to
-call the function again before the original call returns. If a callback is
-triggered by a hardware interrupt, it is recommended to use the Linux
-bottom half mechanism or start a tasklet instead of making the callback
-function call directly from a hardware interrupt.
-
-This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()`
-callbacks.
-
-Digital TV Demux device registration functions and data structures
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. kernel-doc:: include/media/dmxdev.h
-
-High-level Digital TV demux interface
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. kernel-doc:: include/media/dvb_demux.h
-
-Driver-internal low-level hardware specific driver demux interface
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. kernel-doc:: include/media/demux.h
diff --git a/Documentation/media/kapi/dtv-frontend.rst b/Documentation/media/kapi/dtv-frontend.rst
deleted file mode 100644
index b362109bb131..000000000000
--- a/Documentation/media/kapi/dtv-frontend.rst
+++ /dev/null
@@ -1,445 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Digital TV Frontend kABI
-------------------------
-
-Digital TV Frontend
-~~~~~~~~~~~~~~~~~~~
-
-The Digital TV Frontend kABI defines a driver-internal interface for
-registering low-level, hardware specific driver to a hardware independent
-frontend layer. It is only of interest for Digital TV device driver writers.
-The header file for this API is named ``dvb_frontend.h`` and located in
-``include/media/``.
-
-Demodulator driver
-^^^^^^^^^^^^^^^^^^
-
-The demodulator driver is responsible for talking with the decoding part of the
-hardware. Such driver should implement :c:type:`dvb_frontend_ops`, which
-tells what type of digital TV standards are supported, and points to a
-series of functions that allow the DVB core to command the hardware via
-the code under ``include/media/dvb_frontend.c``.
-
-A typical example of such struct in a driver ``foo`` is::
-
-	static struct dvb_frontend_ops foo_ops = {
-		.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
-		.info = {
-			.name	= "foo DVB-T/T2/C driver",
-			.caps = FE_CAN_FEC_1_2 |
-				FE_CAN_FEC_2_3 |
-				FE_CAN_FEC_3_4 |
-				FE_CAN_FEC_5_6 |
-				FE_CAN_FEC_7_8 |
-				FE_CAN_FEC_AUTO |
-				FE_CAN_QPSK |
-				FE_CAN_QAM_16 |
-				FE_CAN_QAM_32 |
-				FE_CAN_QAM_64 |
-				FE_CAN_QAM_128 |
-				FE_CAN_QAM_256 |
-				FE_CAN_QAM_AUTO |
-				FE_CAN_TRANSMISSION_MODE_AUTO |
-				FE_CAN_GUARD_INTERVAL_AUTO |
-				FE_CAN_HIERARCHY_AUTO |
-				FE_CAN_MUTE_TS |
-				FE_CAN_2G_MODULATION,
-			.frequency_min = 42000000, /* Hz */
-			.frequency_max = 1002000000, /* Hz */
-			.symbol_rate_min = 870000,
-			.symbol_rate_max = 11700000
-		},
-		.init = foo_init,
-		.sleep = foo_sleep,
-		.release = foo_release,
-		.set_frontend = foo_set_frontend,
-		.get_frontend = foo_get_frontend,
-		.read_status = foo_get_status_and_stats,
-		.tune = foo_tune,
-		.i2c_gate_ctrl = foo_i2c_gate_ctrl,
-		.get_frontend_algo = foo_get_algo,
-	};
-
-A typical example of such struct in a driver ``bar`` meant to be used on
-Satellite TV reception is::
-
-	static const struct dvb_frontend_ops bar_ops = {
-		.delsys = { SYS_DVBS, SYS_DVBS2 },
-		.info = {
-			.name		= "Bar DVB-S/S2 demodulator",
-			.frequency_min	= 500000, /* KHz */
-			.frequency_max	= 2500000, /* KHz */
-			.frequency_stepsize	= 0,
-			.symbol_rate_min = 1000000,
-			.symbol_rate_max = 45000000,
-			.symbol_rate_tolerance = 500,
-			.caps = FE_CAN_INVERSION_AUTO |
-				FE_CAN_FEC_AUTO |
-				FE_CAN_QPSK,
-		},
-		.init = bar_init,
-		.sleep = bar_sleep,
-		.release = bar_release,
-		.set_frontend = bar_set_frontend,
-		.get_frontend = bar_get_frontend,
-		.read_status = bar_get_status_and_stats,
-		.i2c_gate_ctrl = bar_i2c_gate_ctrl,
-		.get_frontend_algo = bar_get_algo,
-		.tune = bar_tune,
-
-		/* Satellite-specific */
-		.diseqc_send_master_cmd = bar_send_diseqc_msg,
-		.diseqc_send_burst = bar_send_burst,
-		.set_tone = bar_set_tone,
-		.set_voltage = bar_set_voltage,
-	};
-
-.. note::
-
-   #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the
-      frequencies are specified in kHz, while, for terrestrial and cable
-      standards, they're specified in Hz. Due to that, if the same frontend
-      supports both types, you'll need to have two separate
-      :c:type:`dvb_frontend_ops` structures, one for each standard.
-   #) The ``.i2c_gate_ctrl`` field is present only when the hardware has
-      allows controlling an I2C gate (either directly of via some GPIO pin),
-      in order to remove the tuner from the I2C bus after a channel is
-      tuned.
-   #) All new drivers should implement the
-      :ref:`DVBv5 statistics <dvbv5_stats>` via ``.read_status``.
-      Yet, there are a number of callbacks meant to get statistics for
-      signal strength, S/N and UCB. Those are there to provide backward
-      compatibility with legacy applications that don't support the DVBv5
-      API. Implementing those callbacks are optional. Those callbacks may be
-      removed in the future, after we have all existing drivers supporting
-      DVBv5 stats.
-   #) Other callbacks are required for satellite TV standards, in order to
-      control LNBf and DiSEqC: ``.diseqc_send_master_cmd``,
-      ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``.
-
-.. |delta|   unicode:: U+00394
-
-The ``include/media/dvb_frontend.c`` has a kernel thread which is
-responsible for tuning the device. It supports multiple algorithms to
-detect a channel, as defined at enum :c:func:`dvbfe_algo`.
-
-The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver
-doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to
-``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning,
-e. g. it will try first to use the specified center frequency ``f``,
-then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|,
-``f`` - 2 x |delta| and so on.
-
-If the hardware has internally a some sort of zigzag algorithm, you should
-define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``.
-
-.. note::
-
-   The core frontend support also supports
-   a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to
-   define its own hardware-assisted algorithm. Very few hardware need to
-   use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other
-   function callbacks at struct :c:type:`dvb_frontend_ops`.
-
-Attaching frontend driver to the bridge driver
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Before using the Digital TV frontend core, the bridge driver should attach
-the frontend demod, tuner and SEC devices and call
-:c:func:`dvb_register_frontend()`,
-in order to register the new frontend at the subsystem. At device
-detach/removal, the bridge driver should call
-:c:func:`dvb_unregister_frontend()` to
-remove the frontend from the core and then :c:func:`dvb_frontend_detach()`
-to free the memory allocated by the frontend drivers.
-
-The drivers should also call :c:func:`dvb_frontend_suspend()` as part of
-their handler for the :c:type:`device_driver`.\ ``suspend()``, and
-:c:func:`dvb_frontend_resume()` as
-part of their handler for :c:type:`device_driver`.\ ``resume()``.
-
-A few other optional functions are provided to handle some special cases.
-
-.. _dvbv5_stats:
-
-Digital TV Frontend statistics
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Introduction
-^^^^^^^^^^^^
-
-Digital TV frontends provide a range of
-:ref:`statistics <frontend-stat-properties>` meant to help tuning the device
-and measuring the quality of service.
-
-For each statistics measurement, the driver should set the type of scale used,
-or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given
-time. Drivers should also provide the number of statistics for each type.
-that's usually 1 for most video standards [#f2]_.
-
-Drivers should initialize each statistic counters with length and
-scale at its init code. For example, if the frontend provides signal
-strength, it should have, on its init code::
-
-	struct dtv_frontend_properties *c = &state->fe.dtv_property_cache;
-
-	c->strength.len = 1;
-	c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
-
-And, when the statistics got updated, set the scale::
-
-	c->strength.stat[0].scale = FE_SCALE_DECIBEL;
-	c->strength.stat[0].uvalue = strength;
-
-.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer
-   set of statistics. On such cases, len should be equal to 4. The first
-   value corresponds to the global stat; the other ones to each layer, e. g.:
-
-   - c->cnr.stat[0] for global S/N carrier ratio,
-   - c->cnr.stat[1] for Layer A S/N carrier ratio,
-   - c->cnr.stat[2] for layer B S/N carrier ratio,
-   - c->cnr.stat[3] for layer C S/N carrier ratio.
-
-.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of
-   ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements.
-
-Groups of statistics
-^^^^^^^^^^^^^^^^^^^^
-
-There are several groups of statistics currently supported:
-
-Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
-  - Measures the signal strength level at the analog part of the tuner or
-    demod.
-
-  - Typically obtained from the gain applied to the tuner and/or frontend
-    in order to detect the carrier. When no carrier is detected, the gain is
-    at the maximum value (so, strength is on its minimal).
-
-  - As the gain is visible through the set of registers that adjust the gain,
-    typically, this statistics is always available [#f3]_.
-
-  - Drivers should try to make it available all the times, as these statistics
-    can be used when adjusting an antenna position and to check for troubles
-    at the cabling.
-
-  .. [#f3] On a few devices, the gain keeps floating if there is no carrier.
-     On such devices, strength report should check first if carrier is
-     detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
-     and otherwise return the lowest possible value.
-
-Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
-  - Signal to Noise ratio for the main carrier.
-
-  - Signal to Noise measurement depends on the device. On some hardware, it is
-    available when the main carrier is detected. On those hardware, CNR
-    measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
-    see :c:type:`fe_status`).
-
-    On other devices, it requires inner FEC decoding,
-    as the frontend measures it indirectly from other parameters (e. g. after
-    ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
-
-    Having it available after inner FEC is more common.
-
-Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`)
-  - Those counters measure the number of bits and bit errors errors after
-    the forward error correction (FEC) on the inner coding block
-    (after Viterbi, LDPC or other inner code).
-
-  - Due to its nature, those statistics depend on full coding lock
-    (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``,
-    see :c:type:`fe_status`).
-
-Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`)
-  - Those counters measure the number of bits and bit errors errors before
-    the forward error correction (FEC) on the inner coding block
-    (before Viterbi, LDPC or other inner code).
-
-  - Not all frontends provide this kind of statistics.
-
-  - Due to its nature, those statistics depend on inner coding lock (e. g.
-    after ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
-
-Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`)
-  - Those counters measure the number of blocks and block errors errors after
-    the forward error correction (FEC) on the inner coding block
-    (before Viterbi, LDPC or other inner code).
-
-  - Due to its nature, those statistics depend on full coding lock
-    (e. g. after ``FE_HAS_SYNC`` or after
-    ``FE_HAS_LOCK``, see :c:type:`fe_status`).
-
-.. note:: All counters should be monotonically increased as they're
-   collected from the hardware.
-
-A typical example of the logic that handle status and statistics is::
-
-	static int foo_get_status_and_stats(struct dvb_frontend *fe)
-	{
-		struct foo_state *state = fe->demodulator_priv;
-		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
-		int rc;
-		enum fe_status *status;
-
-		/* Both status and strength are always available */
-		rc = foo_read_status(fe, &status);
-		if (rc < 0)
-			return rc;
-
-		rc = foo_read_strength(fe);
-		if (rc < 0)
-			return rc;
-
-		/* Check if CNR is available */
-		if (!(fe->status & FE_HAS_CARRIER))
-			return 0;
-
-		rc = foo_read_cnr(fe);
-		if (rc < 0)
-			return rc;
-
-		/* Check if pre-BER stats are available */
-		if (!(fe->status & FE_HAS_VITERBI))
-			return 0;
-
-		rc = foo_get_pre_ber(fe);
-		if (rc < 0)
-			return rc;
-
-		/* Check if post-BER stats are available */
-		if (!(fe->status & FE_HAS_SYNC))
-			return 0;
-
-		rc = foo_get_post_ber(fe);
-		if (rc < 0)
-			return rc;
-	}
-
-	static const struct dvb_frontend_ops ops = {
-		/* ... */
-		.read_status = foo_get_status_and_stats,
-	};
-
-Statistics collection
-^^^^^^^^^^^^^^^^^^^^^
-
-On almost all frontend hardware, the bit and byte counts are stored by
-the hardware after a certain amount of time or after the total bit/block
-counter reaches a certain value (usually programmable), for example, on
-every 1000 ms or after receiving 1,000,000 bits.
-
-So, if you read the registers too soon, you'll end by reading the same
-value as in the previous reading, causing the monotonic value to be
-incremented too often.
-
-Drivers should take the responsibility to avoid too often reads. That
-can be done using two approaches:
-
-if the driver have a bit that indicates when a collected data is ready
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-Driver should check such bit before making the statistics available.
-
-An example of such behavior can be found at this code snippet (adapted
-from mb86a20s driver's logic)::
-
-	static int foo_get_pre_ber(struct dvb_frontend *fe)
-	{
-		struct foo_state *state = fe->demodulator_priv;
-		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-		int rc, bit_error;
-
-		/* Check if the BER measures are already available */
-		rc = foo_read_u8(state, 0x54);
-		if (rc < 0)
-			return rc;
-
-		if (!rc)
-			return 0;
-
-		/* Read Bit Error Count */
-		bit_error = foo_read_u32(state, 0x55);
-		if (bit_error < 0)
-			return bit_error;
-
-		/* Read Total Bit Count */
-		rc = foo_read_u32(state, 0x51);
-		if (rc < 0)
-			return rc;
-
-		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
-		c->pre_bit_error.stat[0].uvalue += bit_error;
-		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
-		c->pre_bit_count.stat[0].uvalue += rc;
-
-		return 0;
-	}
-
-If the driver doesn't provide a statistics available check bit
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-A few devices, however, may not provide a way to check if the stats are
-available (or the way to check it is unknown). They may not even provide
-a way to directly read the total number of bits or blocks.
-
-On those devices, the driver need to ensure that it won't be reading from
-the register too often and/or estimate the total number of bits/blocks.
-
-On such drivers, a typical routine to get statistics would be like
-(adapted from dib8000 driver's logic)::
-
-	struct foo_state {
-		/* ... */
-
-		unsigned long per_jiffies_stats;
-	}
-
-	static int foo_get_pre_ber(struct dvb_frontend *fe)
-	{
-		struct foo_state *state = fe->demodulator_priv;
-		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-		int rc, bit_error;
-		u64 bits;
-
-		/* Check if time for stats was elapsed */
-		if (!time_after(jiffies, state->per_jiffies_stats))
-			return 0;
-
-		/* Next stat should be collected in 1000 ms */
-		state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
-
-		/* Read Bit Error Count */
-		bit_error = foo_read_u32(state, 0x55);
-		if (bit_error < 0)
-			return bit_error;
-
-		/*
-		 * On this particular frontend, there's no register that
-		 * would provide the number of bits per 1000ms sample. So,
-		 * some function would calculate it based on DTV properties
-		 */
-		bits = get_number_of_bits_per_1000ms(fe);
-
-		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
-		c->pre_bit_error.stat[0].uvalue += bit_error;
-		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
-		c->pre_bit_count.stat[0].uvalue += bits;
-
-		return 0;
-	}
-
-Please notice that, on both cases, we're getting the statistics using the
-:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that
-the frontend core will automatically call this function periodically
-(usually, 3 times per second, when the frontend is locked).
-
-That warrants that we won't miss to collect a counter and increment the
-monotonic stats at the right time.
-
-Digital TV Frontend functions and types
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. kernel-doc:: include/media/dvb_frontend.h
diff --git a/Documentation/media/kapi/dtv-net.rst b/Documentation/media/kapi/dtv-net.rst
deleted file mode 100644
index deb6bffe96bb..000000000000
--- a/Documentation/media/kapi/dtv-net.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Digital TV Network kABI
------------------------
-
-.. kernel-doc:: include/media/dvb_net.h
diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst
deleted file mode 100644
index 05bba0b61748..000000000000
--- a/Documentation/media/kapi/mc-core.rst
+++ /dev/null
@@ -1,309 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Media Controller devices
-------------------------
-
-Media Controller
-~~~~~~~~~~~~~~~~
-
-The media controller userspace API is documented in
-:ref:`the Media Controller uAPI book <media_controller>`. This document focus
-on the kernel-side implementation of the media framework.
-
-Abstract media device model
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Discovering a device internal topology, and configuring it at runtime, is one
-of the goals of the media framework. To achieve this, hardware devices are
-modelled as an oriented graph of building blocks called entities connected
-through pads.
-
-An entity is a basic media hardware building block. It can correspond to
-a large variety of logical blocks such as physical hardware devices
-(CMOS sensor for instance), logical hardware devices (a building block
-in a System-on-Chip image processing pipeline), DMA channels or physical
-connectors.
-
-A pad is a connection endpoint through which an entity can interact with
-other entities. Data (not restricted to video) produced by an entity
-flows from the entity's output to one or more entity inputs. Pads should
-not be confused with physical pins at chip boundaries.
-
-A link is a point-to-point oriented connection between two pads, either
-on the same entity or on different entities. Data flows from a source
-pad to a sink pad.
-
-Media device
-^^^^^^^^^^^^
-
-A media device is represented by a struct :c:type:`media_device`
-instance, defined in ``include/media/media-device.h``.
-Allocation of the structure is handled by the media device driver, usually by
-embedding the :c:type:`media_device` instance in a larger driver-specific
-structure.
-
-Drivers register media device instances by calling
-:c:func:`__media_device_register()` via the macro ``media_device_register()``
-and unregistered by calling :c:func:`media_device_unregister()`.
-
-Entities
-^^^^^^^^
-
-Entities are represented by a struct :c:type:`media_entity`
-instance, defined in ``include/media/media-entity.h``. The structure is usually
-embedded into a higher-level structure, such as
-:c:type:`v4l2_subdev` or :c:type:`video_device`
-instances, although drivers can allocate entities directly.
-
-Drivers initialize entity pads by calling
-:c:func:`media_entity_pads_init()`.
-
-Drivers register entities with a media device by calling
-:c:func:`media_device_register_entity()`
-and unregistered by calling
-:c:func:`media_device_unregister_entity()`.
-
-Interfaces
-^^^^^^^^^^
-
-Interfaces are represented by a
-struct :c:type:`media_interface` instance, defined in
-``include/media/media-entity.h``. Currently, only one type of interface is
-defined: a device node. Such interfaces are represented by a
-struct :c:type:`media_intf_devnode`.
-
-Drivers initialize and create device node interfaces by calling
-:c:func:`media_devnode_create()`
-and remove them by calling:
-:c:func:`media_devnode_remove()`.
-
-Pads
-^^^^
-Pads are represented by a struct :c:type:`media_pad` instance,
-defined in ``include/media/media-entity.h``. Each entity stores its pads in
-a pads array managed by the entity driver. Drivers usually embed the array in
-a driver-specific structure.
-
-Pads are identified by their entity and their 0-based index in the pads
-array.
-
-Both information are stored in the struct :c:type:`media_pad`,
-making the struct :c:type:`media_pad` pointer the canonical way
-to store and pass link references.
-
-Pads have flags that describe the pad capabilities and state.
-
-``MEDIA_PAD_FL_SINK`` indicates that the pad supports sinking data.
-``MEDIA_PAD_FL_SOURCE`` indicates that the pad supports sourcing data.
-
-.. note::
-
-  One and only one of ``MEDIA_PAD_FL_SINK`` or ``MEDIA_PAD_FL_SOURCE`` must
-  be set for each pad.
-
-Links
-^^^^^
-
-Links are represented by a struct :c:type:`media_link` instance,
-defined in ``include/media/media-entity.h``. There are two types of links:
-
-**1. pad to pad links**:
-
-Associate two entities via their PADs. Each entity has a list that points
-to all links originating at or targeting any of its pads.
-A given link is thus stored twice, once in the source entity and once in
-the target entity.
-
-Drivers create pad to pad links by calling:
-:c:func:`media_create_pad_link()` and remove with
-:c:func:`media_entity_remove_links()`.
-
-**2. interface to entity links**:
-
-Associate one interface to a Link.
-
-Drivers create interface to entity links by calling:
-:c:func:`media_create_intf_link()` and remove with
-:c:func:`media_remove_intf_links()`.
-
-.. note::
-
-   Links can only be created after having both ends already created.
-
-Links have flags that describe the link capabilities and state. The
-valid values are described at :c:func:`media_create_pad_link()` and
-:c:func:`media_create_intf_link()`.
-
-Graph traversal
-^^^^^^^^^^^^^^^
-
-The media framework provides APIs to iterate over entities in a graph.
-
-To iterate over all entities belonging to a media device, drivers can use
-the media_device_for_each_entity macro, defined in
-``include/media/media-device.h``.
-
-..  code-block:: c
-
-    struct media_entity *entity;
-
-    media_device_for_each_entity(entity, mdev) {
-    // entity will point to each entity in turn
-    ...
-    }
-
-Drivers might also need to iterate over all entities in a graph that can be
-reached only through enabled links starting at a given entity. The media
-framework provides a depth-first graph traversal API for that purpose.
-
-.. note::
-
-   Graphs with cycles (whether directed or undirected) are **NOT**
-   supported by the graph traversal API. To prevent infinite loops, the graph
-   traversal code limits the maximum depth to ``MEDIA_ENTITY_ENUM_MAX_DEPTH``,
-   currently defined as 16.
-
-Drivers initiate a graph traversal by calling
-:c:func:`media_graph_walk_start()`
-
-The graph structure, provided by the caller, is initialized to start graph
-traversal at the given entity.
-
-Drivers can then retrieve the next entity by calling
-:c:func:`media_graph_walk_next()`
-
-When the graph traversal is complete the function will return ``NULL``.
-
-Graph traversal can be interrupted at any moment. No cleanup function call
-is required and the graph structure can be freed normally.
-
-Helper functions can be used to find a link between two given pads, or a pad
-connected to another pad through an enabled link
-:c:func:`media_entity_find_link()` and
-:c:func:`media_entity_remote_pad()`.
-
-Use count and power handling
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Due to the wide differences between drivers regarding power management
-needs, the media controller does not implement power management. However,
-the struct :c:type:`media_entity` includes a ``use_count``
-field that media drivers
-can use to track the number of users of every entity for power management
-needs.
-
-The :c:type:`media_entity<media_entity>`.\ ``use_count`` field is owned by
-media drivers and must not be
-touched by entity drivers. Access to the field must be protected by the
-:c:type:`media_device`.\ ``graph_mutex`` lock.
-
-Links setup
-^^^^^^^^^^^
-
-Link properties can be modified at runtime by calling
-:c:func:`media_entity_setup_link()`.
-
-Pipelines and media streams
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-When starting streaming, drivers must notify all entities in the pipeline to
-prevent link states from being modified during streaming by calling
-:c:func:`media_pipeline_start()`.
-
-The function will mark all entities connected to the given entity through
-enabled links, either directly or indirectly, as streaming.
-
-The struct :c:type:`media_pipeline` instance pointed to by
-the pipe argument will be stored in every entity in the pipeline.
-Drivers should embed the struct :c:type:`media_pipeline`
-in higher-level pipeline structures and can then access the
-pipeline through the struct :c:type:`media_entity`
-pipe field.
-
-Calls to :c:func:`media_pipeline_start()` can be nested.
-The pipeline pointer must be identical for all nested calls to the function.
-
-:c:func:`media_pipeline_start()` may return an error. In that case,
-it will clean up any of the changes it did by itself.
-
-When stopping the stream, drivers must notify the entities with
-:c:func:`media_pipeline_stop()`.
-
-If multiple calls to :c:func:`media_pipeline_start()` have been
-made the same number of :c:func:`media_pipeline_stop()` calls
-are required to stop streaming.
-The :c:type:`media_entity`.\ ``pipe`` field is reset to ``NULL`` on the last
-nested stop call.
-
-Link configuration will fail with ``-EBUSY`` by default if either end of the
-link is a streaming entity. Links that can be modified while streaming must
-be marked with the ``MEDIA_LNK_FL_DYNAMIC`` flag.
-
-If other operations need to be disallowed on streaming entities (such as
-changing entities configuration parameters) drivers can explicitly check the
-media_entity stream_count field to find out if an entity is streaming. This
-operation must be done with the media_device graph_mutex held.
-
-Link validation
-^^^^^^^^^^^^^^^
-
-Link validation is performed by :c:func:`media_pipeline_start()`
-for any entity which has sink pads in the pipeline. The
-:c:type:`media_entity`.\ ``link_validate()`` callback is used for that
-purpose. In ``link_validate()`` callback, entity driver should check
-that the properties of the source pad of the connected entity and its own
-sink pad match. It is up to the type of the entity (and in the end, the
-properties of the hardware) what matching actually means.
-
-Subsystems should facilitate link validation by providing subsystem specific
-helper functions to provide easy access for commonly needed information, and
-in the end provide a way to use driver-specific callbacks.
-
-Media Controller Device Allocator API
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-When the media device belongs to more than one driver, the shared media
-device is allocated with the shared struct device as the key for look ups.
-
-The shared media device should stay in registered state until the last
-driver unregisters it. In addition, the media device should be released when
-all the references are released. Each driver gets a reference to the media
-device during probe, when it allocates the media device. If media device is
-already allocated, the allocate API bumps up the refcount and returns the
-existing media device. The driver puts the reference back in its disconnect
-routine when it calls :c:func:`media_device_delete()`.
-
-The media device is unregistered and cleaned up from the kref put handler to
-ensure that the media device stays in registered state until the last driver
-unregisters the media device.
-
-**Driver Usage**
-
-Drivers should use the appropriate media-core routines to manage the shared
-media device life-time handling the two states:
-1. allocate -> register -> delete
-2. get reference to already registered device -> delete
-
-call :c:func:`media_device_delete()` routine to make sure the shared media
-device delete is handled correctly.
-
-**driver probe:**
-Call :c:func:`media_device_usb_allocate()` to allocate or get a reference
-Call :c:func:`media_device_register()`, if media devnode isn't registered
-
-**driver disconnect:**
-Call :c:func:`media_device_delete()` to free the media_device. Freeing is
-handled by the kref put handler.
-
-API Definitions
-^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/media-device.h
-
-.. kernel-doc:: include/media/media-devnode.h
-
-.. kernel-doc:: include/media/media-entity.h
-
-.. kernel-doc:: include/media/media-request.h
-
-.. kernel-doc:: include/media/media-dev-allocator.h
diff --git a/Documentation/media/kapi/rc-core.rst b/Documentation/media/kapi/rc-core.rst
deleted file mode 100644
index 53f5e643b6e9..000000000000
--- a/Documentation/media/kapi/rc-core.rst
+++ /dev/null
@@ -1,88 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Remote Controller devices
--------------------------
-
-Remote Controller core
-~~~~~~~~~~~~~~~~~~~~~~
-
-The remote controller core implements infrastructure to receive and send
-remote controller keyboard keystrokes and mouse events.
-
-Every time a key is pressed on a remote controller, a scan code is produced.
-Also, on most hardware, keeping a key pressed for more than a few dozens of
-milliseconds produce a repeat key event. That's somewhat similar to what
-a normal keyboard or mouse is handled internally on Linux\ [#f1]_. So, the
-remote controller core is implemented on the top of the linux input/evdev
-interface.
-
-.. [#f1]
-
-   The main difference is that, on keyboard events, the keyboard controller
-   produces one event for a key press and another one for key release. On
-   infrared-based remote controllers, there's no key release event. Instead,
-   an extra code is produced to indicate key repeats.
-
-However, most of the remote controllers use infrared (IR) to transmit signals.
-As there are several protocols used to modulate infrared signals, one
-important part of the core is dedicated to adjust the driver and the core
-system to support the infrared protocol used by the emitter.
-
-The infrared transmission is done by blinking a infrared emitter using a
-carrier. The carrier can be switched on or off by the IR transmitter
-hardware. When the carrier is switched on, it is called *PULSE*.
-When the carrier is switched off, it is called *SPACE*.
-
-In other words, a typical IR transmission can be viewed as a sequence of
-*PULSE* and *SPACE* events, each with a given duration.
-
-The carrier parameters (frequency, duty cycle) and the intervals for
-*PULSE* and *SPACE* events depend on the protocol.
-For example, the NEC protocol uses a carrier of 38kHz, and transmissions
-start with a 9ms *PULSE* and a 4.5ms SPACE. It then transmits 16 bits of
-scan code, being 8 bits for address (usually it is a fixed number for a
-given remote controller), followed by 8 bits of code. A bit "1" is modulated
-with 560µs *PULSE* followed by 1690µs *SPACE* and a bit "0"  is modulated
-with 560µs *PULSE* followed by 560µs *SPACE*.
-
-At receiver, a simple low-pass filter can be used to convert the received
-signal in a sequence of *PULSE/SPACE* events, filtering out the carrier
-frequency. Due to that, the receiver doesn't care about the carrier's
-actual frequency parameters: all it has to do is to measure the amount
-of time it receives *PULSE/SPACE* events.
-So, a simple IR receiver hardware will just provide a sequence of timings
-for those events to the Kernel. The drivers for hardware with such kind of
-receivers are identified by  ``RC_DRIVER_IR_RAW``, as defined by
-:c:type:`rc_driver_type`\ [#f2]_. Other hardware come with a
-microcontroller that decode the *PULSE/SPACE* sequence and return scan
-codes to the Kernel. Such kind of receivers are identified
-by ``RC_DRIVER_SCANCODE``.
-
-.. [#f2]
-
-   The RC core also supports devices that have just IR emitters,
-   without any receivers. Right now, all such devices work only in
-   raw TX mode. Such kind of hardware is identified as
-   ``RC_DRIVER_IR_RAW_TX``.
-
-When the RC core receives events produced by ``RC_DRIVER_IR_RAW`` IR
-receivers, it needs to decode the IR protocol, in order to obtain the
-corresponding scan code. The protocols supported by the RC core are
-defined at enum :c:type:`rc_proto`.
-
-When the RC code receives a scan code (either directly, by a driver
-of the type ``RC_DRIVER_SCANCODE``, or via its IR decoders), it needs
-to convert into a Linux input event code. This is done via a mapping
-table.
-
-The Kernel has support for mapping tables available on most media
-devices. It also supports loading a table in runtime, via some
-sysfs nodes. See the :ref:`RC userspace API <Remote_controllers_Intro>`
-for more details.
-
-Remote controller data structures and functions
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/rc-core.h
-
-.. kernel-doc:: include/media/rc-map.h
diff --git a/Documentation/media/kapi/v4l2-async.rst b/Documentation/media/kapi/v4l2-async.rst
deleted file mode 100644
index 3422330b3b1f..000000000000
--- a/Documentation/media/kapi/v4l2-async.rst
+++ /dev/null
@@ -1,5 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 async kAPI
-^^^^^^^^^^^^^^^
-.. kernel-doc:: include/media/v4l2-async.h
diff --git a/Documentation/media/kapi/v4l2-clocks.rst b/Documentation/media/kapi/v4l2-clocks.rst
deleted file mode 100644
index 5c22eecab7ba..000000000000
--- a/Documentation/media/kapi/v4l2-clocks.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 clocks
------------
-
-.. attention::
-
-	This is a temporary API and it shall be replaced by the generic
-	clock API, when the latter becomes widely available.
-
-Many subdevices, like camera sensors, TV decoders and encoders, need a clock
-signal to be supplied by the system. Often this clock is supplied by the
-respective bridge device. The Linux kernel provides a Common Clock Framework for
-this purpose. However, it is not (yet) available on all architectures. Besides,
-the nature of the multi-functional (clock, data + synchronisation, I2C control)
-connection of subdevices to the system might impose special requirements on the
-clock API usage. E.g. V4L2 has to support clock provider driver unregistration
-while a subdevice driver is holding a reference to the clock. For these reasons
-a V4L2 clock helper API has been developed and is provided to bridge and
-subdevice drivers.
-
-The API consists of two parts: two functions to register and unregister a V4L2
-clock source: v4l2_clk_register() and v4l2_clk_unregister() and calls to control
-a clock object, similar to the respective generic clock API calls:
-v4l2_clk_get(), v4l2_clk_put(), v4l2_clk_enable(), v4l2_clk_disable(),
-v4l2_clk_get_rate(), and v4l2_clk_set_rate(). Clock suppliers have to provide
-clock operations that will be called when clock users invoke respective API
-methods.
-
-It is expected that once the CCF becomes available on all relevant
-architectures this API will be removed.
diff --git a/Documentation/media/kapi/v4l2-common.rst b/Documentation/media/kapi/v4l2-common.rst
deleted file mode 100644
index b1e70eb56aa4..000000000000
--- a/Documentation/media/kapi/v4l2-common.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 common functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-common.h
-
-.. kernel-doc:: include/media/v4l2-ioctl.h
diff --git a/Documentation/media/kapi/v4l2-controls.rst b/Documentation/media/kapi/v4l2-controls.rst
deleted file mode 100644
index 5129019afb49..000000000000
--- a/Documentation/media/kapi/v4l2-controls.rst
+++ /dev/null
@@ -1,823 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 Controls
-=============
-
-Introduction
-------------
-
-The V4L2 control API seems simple enough, but quickly becomes very hard to
-implement correctly in drivers. But much of the code needed to handle controls
-is actually not driver specific and can be moved to the V4L core framework.
-
-After all, the only part that a driver developer is interested in is:
-
-1) How do I add a control?
-2) How do I set the control's value? (i.e. s_ctrl)
-
-And occasionally:
-
-3) How do I get the control's value? (i.e. g_volatile_ctrl)
-4) How do I validate the user's proposed control value? (i.e. try_ctrl)
-
-All the rest is something that can be done centrally.
-
-The control framework was created in order to implement all the rules of the
-V4L2 specification with respect to controls in a central place. And to make
-life as easy as possible for the driver developer.
-
-Note that the control framework relies on the presence of a struct
-:c:type:`v4l2_device` for V4L2 drivers and struct :c:type:`v4l2_subdev` for
-sub-device drivers.
-
-
-Objects in the framework
-------------------------
-
-There are two main objects:
-
-The :c:type:`v4l2_ctrl` object describes the control properties and keeps
-track of the control's value (both the current value and the proposed new
-value).
-
-:c:type:`v4l2_ctrl_handler` is the object that keeps track of controls. It
-maintains a list of v4l2_ctrl objects that it owns and another list of
-references to controls, possibly to controls owned by other handlers.
-
-
-Basic usage for V4L2 and sub-device drivers
--------------------------------------------
-
-1) Prepare the driver:
-
-.. code-block:: c
-
-	#include <media/v4l2-ctrls.h>
-
-1.1) Add the handler to your driver's top-level struct:
-
-For V4L2 drivers:
-
-.. code-block:: c
-
-	struct foo_dev {
-		...
-		struct v4l2_device v4l2_dev;
-		...
-		struct v4l2_ctrl_handler ctrl_handler;
-		...
-	};
-
-For sub-device drivers:
-
-.. code-block:: c
-
-	struct foo_dev {
-		...
-		struct v4l2_subdev sd;
-		...
-		struct v4l2_ctrl_handler ctrl_handler;
-		...
-	};
-
-1.2) Initialize the handler:
-
-.. code-block:: c
-
-	v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
-
-The second argument is a hint telling the function how many controls this
-handler is expected to handle. It will allocate a hashtable based on this
-information. It is a hint only.
-
-1.3) Hook the control handler into the driver:
-
-For V4L2 drivers:
-
-.. code-block:: c
-
-	foo->v4l2_dev.ctrl_handler = &foo->ctrl_handler;
-
-For sub-device drivers:
-
-.. code-block:: c
-
-	foo->sd.ctrl_handler = &foo->ctrl_handler;
-
-1.4) Clean up the handler at the end:
-
-.. code-block:: c
-
-	v4l2_ctrl_handler_free(&foo->ctrl_handler);
-
-
-2) Add controls:
-
-You add non-menu controls by calling :c:func:`v4l2_ctrl_new_std`:
-
-.. code-block:: c
-
-	struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
-			const struct v4l2_ctrl_ops *ops,
-			u32 id, s32 min, s32 max, u32 step, s32 def);
-
-Menu and integer menu controls are added by calling
-:c:func:`v4l2_ctrl_new_std_menu`:
-
-.. code-block:: c
-
-	struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
-			const struct v4l2_ctrl_ops *ops,
-			u32 id, s32 max, s32 skip_mask, s32 def);
-
-Menu controls with a driver specific menu are added by calling
-:c:func:`v4l2_ctrl_new_std_menu_items`:
-
-.. code-block:: c
-
-       struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(
-                       struct v4l2_ctrl_handler *hdl,
-                       const struct v4l2_ctrl_ops *ops, u32 id, s32 max,
-                       s32 skip_mask, s32 def, const char * const *qmenu);
-
-Standard compound controls can be added by calling
-:c:func:`v4l2_ctrl_new_std_compound`:
-
-.. code-block:: c
-
-       struct v4l2_ctrl *v4l2_ctrl_new_std_compound(struct v4l2_ctrl_handler *hdl,
-                       const struct v4l2_ctrl_ops *ops, u32 id,
-                       const union v4l2_ctrl_ptr p_def);
-
-Integer menu controls with a driver specific menu can be added by calling
-:c:func:`v4l2_ctrl_new_int_menu`:
-
-.. code-block:: c
-
-	struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl,
-			const struct v4l2_ctrl_ops *ops,
-			u32 id, s32 max, s32 def, const s64 *qmenu_int);
-
-These functions are typically called right after the
-:c:func:`v4l2_ctrl_handler_init`:
-
-.. code-block:: c
-
-	static const s64 exp_bias_qmenu[] = {
-	       -2, -1, 0, 1, 2
-	};
-	static const char * const test_pattern[] = {
-		"Disabled",
-		"Vertical Bars",
-		"Solid Black",
-		"Solid White",
-	};
-
-	v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
-	v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
-			V4L2_CID_CONTRAST, 0, 255, 1, 128);
-	v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops,
-			V4L2_CID_POWER_LINE_FREQUENCY,
-			V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
-			V4L2_CID_POWER_LINE_FREQUENCY_DISABLED);
-	v4l2_ctrl_new_int_menu(&foo->ctrl_handler, &foo_ctrl_ops,
-			V4L2_CID_EXPOSURE_BIAS,
-			ARRAY_SIZE(exp_bias_qmenu) - 1,
-			ARRAY_SIZE(exp_bias_qmenu) / 2 - 1,
-			exp_bias_qmenu);
-	v4l2_ctrl_new_std_menu_items(&foo->ctrl_handler, &foo_ctrl_ops,
-			V4L2_CID_TEST_PATTERN, ARRAY_SIZE(test_pattern) - 1, 0,
-			0, test_pattern);
-	...
-	if (foo->ctrl_handler.error) {
-		int err = foo->ctrl_handler.error;
-
-		v4l2_ctrl_handler_free(&foo->ctrl_handler);
-		return err;
-	}
-
-The :c:func:`v4l2_ctrl_new_std` function returns the v4l2_ctrl pointer to
-the new control, but if you do not need to access the pointer outside the
-control ops, then there is no need to store it.
-
-The :c:func:`v4l2_ctrl_new_std` function will fill in most fields based on
-the control ID except for the min, max, step and default values. These are
-passed in the last four arguments. These values are driver specific while
-control attributes like type, name, flags are all global. The control's
-current value will be set to the default value.
-
-The :c:func:`v4l2_ctrl_new_std_menu` function is very similar but it is
-used for menu controls. There is no min argument since that is always 0 for
-menu controls, and instead of a step there is a skip_mask argument: if bit
-X is 1, then menu item X is skipped.
-
-The :c:func:`v4l2_ctrl_new_int_menu` function creates a new standard
-integer menu control with driver-specific items in the menu. It differs
-from v4l2_ctrl_new_std_menu in that it doesn't have the mask argument and
-takes as the last argument an array of signed 64-bit integers that form an
-exact menu item list.
-
-The :c:func:`v4l2_ctrl_new_std_menu_items` function is very similar to
-v4l2_ctrl_new_std_menu but takes an extra parameter qmenu, which is the
-driver specific menu for an otherwise standard menu control. A good example
-for this control is the test pattern control for capture/display/sensors
-devices that have the capability to generate test patterns. These test
-patterns are hardware specific, so the contents of the menu will vary from
-device to device.
-
-Note that if something fails, the function will return NULL or an error and
-set ctrl_handler->error to the error code. If ctrl_handler->error was already
-set, then it will just return and do nothing. This is also true for
-v4l2_ctrl_handler_init if it cannot allocate the internal data structure.
-
-This makes it easy to init the handler and just add all controls and only check
-the error code at the end. Saves a lot of repetitive error checking.
-
-It is recommended to add controls in ascending control ID order: it will be
-a bit faster that way.
-
-3) Optionally force initial control setup:
-
-.. code-block:: c
-
-	v4l2_ctrl_handler_setup(&foo->ctrl_handler);
-
-This will call s_ctrl for all controls unconditionally. Effectively this
-initializes the hardware to the default control values. It is recommended
-that you do this as this ensures that both the internal data structures and
-the hardware are in sync.
-
-4) Finally: implement the :c:type:`v4l2_ctrl_ops`
-
-.. code-block:: c
-
-	static const struct v4l2_ctrl_ops foo_ctrl_ops = {
-		.s_ctrl = foo_s_ctrl,
-	};
-
-Usually all you need is s_ctrl:
-
-.. code-block:: c
-
-	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
-	{
-		struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
-
-		switch (ctrl->id) {
-		case V4L2_CID_BRIGHTNESS:
-			write_reg(0x123, ctrl->val);
-			break;
-		case V4L2_CID_CONTRAST:
-			write_reg(0x456, ctrl->val);
-			break;
-		}
-		return 0;
-	}
-
-The control ops are called with the v4l2_ctrl pointer as argument.
-The new control value has already been validated, so all you need to do is
-to actually update the hardware registers.
-
-You're done! And this is sufficient for most of the drivers we have. No need
-to do any validation of control values, or implement QUERYCTRL, QUERY_EXT_CTRL
-and QUERYMENU. And G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported.
-
-
-.. note::
-
-   The remainder sections deal with more advanced controls topics and scenarios.
-   In practice the basic usage as described above is sufficient for most drivers.
-
-
-Inheriting Sub-device Controls
-------------------------------
-
-When a sub-device is registered with a V4L2 driver by calling
-v4l2_device_register_subdev() and the ctrl_handler fields of both v4l2_subdev
-and v4l2_device are set, then the controls of the subdev will become
-automatically available in the V4L2 driver as well. If the subdev driver
-contains controls that already exist in the V4L2 driver, then those will be
-skipped (so a V4L2 driver can always override a subdev control).
-
-What happens here is that v4l2_device_register_subdev() calls
-v4l2_ctrl_add_handler() adding the controls of the subdev to the controls
-of v4l2_device.
-
-
-Accessing Control Values
-------------------------
-
-The following union is used inside the control framework to access control
-values:
-
-.. code-block:: c
-
-	union v4l2_ctrl_ptr {
-		s32 *p_s32;
-		s64 *p_s64;
-		char *p_char;
-		void *p;
-	};
-
-The v4l2_ctrl struct contains these fields that can be used to access both
-current and new values:
-
-.. code-block:: c
-
-	s32 val;
-	struct {
-		s32 val;
-	} cur;
-
-
-	union v4l2_ctrl_ptr p_new;
-	union v4l2_ctrl_ptr p_cur;
-
-If the control has a simple s32 type type, then:
-
-.. code-block:: c
-
-	&ctrl->val == ctrl->p_new.p_s32
-	&ctrl->cur.val == ctrl->p_cur.p_s32
-
-For all other types use ctrl->p_cur.p<something>. Basically the val
-and cur.val fields can be considered an alias since these are used so often.
-
-Within the control ops you can freely use these. The val and cur.val speak for
-themselves. The p_char pointers point to character buffers of length
-ctrl->maximum + 1, and are always 0-terminated.
-
-Unless the control is marked volatile the p_cur field points to the the
-current cached control value. When you create a new control this value is made
-identical to the default value. After calling v4l2_ctrl_handler_setup() this
-value is passed to the hardware. It is generally a good idea to call this
-function.
-
-Whenever a new value is set that new value is automatically cached. This means
-that most drivers do not need to implement the g_volatile_ctrl() op. The
-exception is for controls that return a volatile register such as a signal
-strength read-out that changes continuously. In that case you will need to
-implement g_volatile_ctrl like this:
-
-.. code-block:: c
-
-	static int foo_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
-	{
-		switch (ctrl->id) {
-		case V4L2_CID_BRIGHTNESS:
-			ctrl->val = read_reg(0x123);
-			break;
-		}
-	}
-
-Note that you use the 'new value' union as well in g_volatile_ctrl. In general
-controls that need to implement g_volatile_ctrl are read-only controls. If they
-are not, a V4L2_EVENT_CTRL_CH_VALUE will not be generated when the control
-changes.
-
-To mark a control as volatile you have to set V4L2_CTRL_FLAG_VOLATILE:
-
-.. code-block:: c
-
-	ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
-	if (ctrl)
-		ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
-
-For try/s_ctrl the new values (i.e. as passed by the user) are filled in and
-you can modify them in try_ctrl or set them in s_ctrl. The 'cur' union
-contains the current value, which you can use (but not change!) as well.
-
-If s_ctrl returns 0 (OK), then the control framework will copy the new final
-values to the 'cur' union.
-
-While in g_volatile/s/try_ctrl you can access the value of all controls owned
-by the same handler since the handler's lock is held. If you need to access
-the value of controls owned by other handlers, then you have to be very careful
-not to introduce deadlocks.
-
-Outside of the control ops you have to go through to helper functions to get
-or set a single control value safely in your driver:
-
-.. code-block:: c
-
-	s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
-	int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
-
-These functions go through the control framework just as VIDIOC_G/S_CTRL ioctls
-do. Don't use these inside the control ops g_volatile/s/try_ctrl, though, that
-will result in a deadlock since these helpers lock the handler as well.
-
-You can also take the handler lock yourself:
-
-.. code-block:: c
-
-	mutex_lock(&state->ctrl_handler.lock);
-	pr_info("String value is '%s'\n", ctrl1->p_cur.p_char);
-	pr_info("Integer value is '%s'\n", ctrl2->cur.val);
-	mutex_unlock(&state->ctrl_handler.lock);
-
-
-Menu Controls
--------------
-
-The v4l2_ctrl struct contains this union:
-
-.. code-block:: c
-
-	union {
-		u32 step;
-		u32 menu_skip_mask;
-	};
-
-For menu controls menu_skip_mask is used. What it does is that it allows you
-to easily exclude certain menu items. This is used in the VIDIOC_QUERYMENU
-implementation where you can return -EINVAL if a certain menu item is not
-present. Note that VIDIOC_QUERYCTRL always returns a step value of 1 for
-menu controls.
-
-A good example is the MPEG Audio Layer II Bitrate menu control where the
-menu is a list of standardized possible bitrates. But in practice hardware
-implementations will only support a subset of those. By setting the skip
-mask you can tell the framework which menu items should be skipped. Setting
-it to 0 means that all menu items are supported.
-
-You set this mask either through the v4l2_ctrl_config struct for a custom
-control, or by calling v4l2_ctrl_new_std_menu().
-
-
-Custom Controls
----------------
-
-Driver specific controls can be created using v4l2_ctrl_new_custom():
-
-.. code-block:: c
-
-	static const struct v4l2_ctrl_config ctrl_filter = {
-		.ops = &ctrl_custom_ops,
-		.id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
-		.name = "Spatial Filter",
-		.type = V4L2_CTRL_TYPE_INTEGER,
-		.flags = V4L2_CTRL_FLAG_SLIDER,
-		.max = 15,
-		.step = 1,
-	};
-
-	ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_filter, NULL);
-
-The last argument is the priv pointer which can be set to driver-specific
-private data.
-
-The v4l2_ctrl_config struct also has a field to set the is_private flag.
-
-If the name field is not set, then the framework will assume this is a standard
-control and will fill in the name, type and flags fields accordingly.
-
-
-Active and Grabbed Controls
----------------------------
-
-If you get more complex relationships between controls, then you may have to
-activate and deactivate controls. For example, if the Chroma AGC control is
-on, then the Chroma Gain control is inactive. That is, you may set it, but
-the value will not be used by the hardware as long as the automatic gain
-control is on. Typically user interfaces can disable such input fields.
-
-You can set the 'active' status using v4l2_ctrl_activate(). By default all
-controls are active. Note that the framework does not check for this flag.
-It is meant purely for GUIs. The function is typically called from within
-s_ctrl.
-
-The other flag is the 'grabbed' flag. A grabbed control means that you cannot
-change it because it is in use by some resource. Typical examples are MPEG
-bitrate controls that cannot be changed while capturing is in progress.
-
-If a control is set to 'grabbed' using v4l2_ctrl_grab(), then the framework
-will return -EBUSY if an attempt is made to set this control. The
-v4l2_ctrl_grab() function is typically called from the driver when it
-starts or stops streaming.
-
-
-Control Clusters
-----------------
-
-By default all controls are independent from the others. But in more
-complex scenarios you can get dependencies from one control to another.
-In that case you need to 'cluster' them:
-
-.. code-block:: c
-
-	struct foo {
-		struct v4l2_ctrl_handler ctrl_handler;
-	#define AUDIO_CL_VOLUME (0)
-	#define AUDIO_CL_MUTE   (1)
-		struct v4l2_ctrl *audio_cluster[2];
-		...
-	};
-
-	state->audio_cluster[AUDIO_CL_VOLUME] =
-		v4l2_ctrl_new_std(&state->ctrl_handler, ...);
-	state->audio_cluster[AUDIO_CL_MUTE] =
-		v4l2_ctrl_new_std(&state->ctrl_handler, ...);
-	v4l2_ctrl_cluster(ARRAY_SIZE(state->audio_cluster), state->audio_cluster);
-
-From now on whenever one or more of the controls belonging to the same
-cluster is set (or 'gotten', or 'tried'), only the control ops of the first
-control ('volume' in this example) is called. You effectively create a new
-composite control. Similar to how a 'struct' works in C.
-
-So when s_ctrl is called with V4L2_CID_AUDIO_VOLUME as argument, you should set
-all two controls belonging to the audio_cluster:
-
-.. code-block:: c
-
-	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
-	{
-		struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
-
-		switch (ctrl->id) {
-		case V4L2_CID_AUDIO_VOLUME: {
-			struct v4l2_ctrl *mute = ctrl->cluster[AUDIO_CL_MUTE];
-
-			write_reg(0x123, mute->val ? 0 : ctrl->val);
-			break;
-		}
-		case V4L2_CID_CONTRAST:
-			write_reg(0x456, ctrl->val);
-			break;
-		}
-		return 0;
-	}
-
-In the example above the following are equivalent for the VOLUME case:
-
-.. code-block:: c
-
-	ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
-	ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
-
-In practice using cluster arrays like this becomes very tiresome. So instead
-the following equivalent method is used:
-
-.. code-block:: c
-
-	struct {
-		/* audio cluster */
-		struct v4l2_ctrl *volume;
-		struct v4l2_ctrl *mute;
-	};
-
-The anonymous struct is used to clearly 'cluster' these two control pointers,
-but it serves no other purpose. The effect is the same as creating an
-array with two control pointers. So you can just do:
-
-.. code-block:: c
-
-	state->volume = v4l2_ctrl_new_std(&state->ctrl_handler, ...);
-	state->mute = v4l2_ctrl_new_std(&state->ctrl_handler, ...);
-	v4l2_ctrl_cluster(2, &state->volume);
-
-And in foo_s_ctrl you can use these pointers directly: state->mute->val.
-
-Note that controls in a cluster may be NULL. For example, if for some
-reason mute was never added (because the hardware doesn't support that
-particular feature), then mute will be NULL. So in that case we have a
-cluster of 2 controls, of which only 1 is actually instantiated. The
-only restriction is that the first control of the cluster must always be
-present, since that is the 'master' control of the cluster. The master
-control is the one that identifies the cluster and that provides the
-pointer to the v4l2_ctrl_ops struct that is used for that cluster.
-
-Obviously, all controls in the cluster array must be initialized to either
-a valid control or to NULL.
-
-In rare cases you might want to know which controls of a cluster actually
-were set explicitly by the user. For this you can check the 'is_new' flag of
-each control. For example, in the case of a volume/mute cluster the 'is_new'
-flag of the mute control would be set if the user called VIDIOC_S_CTRL for
-mute only. If the user would call VIDIOC_S_EXT_CTRLS for both mute and volume
-controls, then the 'is_new' flag would be 1 for both controls.
-
-The 'is_new' flag is always 1 when called from v4l2_ctrl_handler_setup().
-
-
-Handling autogain/gain-type Controls with Auto Clusters
--------------------------------------------------------
-
-A common type of control cluster is one that handles 'auto-foo/foo'-type
-controls. Typical examples are autogain/gain, autoexposure/exposure,
-autowhitebalance/red balance/blue balance. In all cases you have one control
-that determines whether another control is handled automatically by the hardware,
-or whether it is under manual control from the user.
-
-If the cluster is in automatic mode, then the manual controls should be
-marked inactive and volatile. When the volatile controls are read the
-g_volatile_ctrl operation should return the value that the hardware's automatic
-mode set up automatically.
-
-If the cluster is put in manual mode, then the manual controls should become
-active again and the volatile flag is cleared (so g_volatile_ctrl is no longer
-called while in manual mode). In addition just before switching to manual mode
-the current values as determined by the auto mode are copied as the new manual
-values.
-
-Finally the V4L2_CTRL_FLAG_UPDATE should be set for the auto control since
-changing that control affects the control flags of the manual controls.
-
-In order to simplify this a special variation of v4l2_ctrl_cluster was
-introduced:
-
-.. code-block:: c
-
-	void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
-				    u8 manual_val, bool set_volatile);
-
-The first two arguments are identical to v4l2_ctrl_cluster. The third argument
-tells the framework which value switches the cluster into manual mode. The
-last argument will optionally set V4L2_CTRL_FLAG_VOLATILE for the non-auto controls.
-If it is false, then the manual controls are never volatile. You would typically
-use that if the hardware does not give you the option to read back to values as
-determined by the auto mode (e.g. if autogain is on, the hardware doesn't allow
-you to obtain the current gain value).
-
-The first control of the cluster is assumed to be the 'auto' control.
-
-Using this function will ensure that you don't need to handle all the complex
-flag and volatile handling.
-
-
-VIDIOC_LOG_STATUS Support
--------------------------
-
-This ioctl allow you to dump the current status of a driver to the kernel log.
-The v4l2_ctrl_handler_log_status(ctrl_handler, prefix) can be used to dump the
-value of the controls owned by the given handler to the log. You can supply a
-prefix as well. If the prefix didn't end with a space, then ': ' will be added
-for you.
-
-
-Different Handlers for Different Video Nodes
---------------------------------------------
-
-Usually the V4L2 driver has just one control handler that is global for
-all video nodes. But you can also specify different control handlers for
-different video nodes. You can do that by manually setting the ctrl_handler
-field of struct video_device.
-
-That is no problem if there are no subdevs involved but if there are, then
-you need to block the automatic merging of subdev controls to the global
-control handler. You do that by simply setting the ctrl_handler field in
-struct v4l2_device to NULL. Now v4l2_device_register_subdev() will no longer
-merge subdev controls.
-
-After each subdev was added, you will then have to call v4l2_ctrl_add_handler
-manually to add the subdev's control handler (sd->ctrl_handler) to the desired
-control handler. This control handler may be specific to the video_device or
-for a subset of video_device's. For example: the radio device nodes only have
-audio controls, while the video and vbi device nodes share the same control
-handler for the audio and video controls.
-
-If you want to have one handler (e.g. for a radio device node) have a subset
-of another handler (e.g. for a video device node), then you should first add
-the controls to the first handler, add the other controls to the second
-handler and finally add the first handler to the second. For example:
-
-.. code-block:: c
-
-	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_VOLUME, ...);
-	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
-	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
-	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
-	v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler, NULL);
-
-The last argument to v4l2_ctrl_add_handler() is a filter function that allows
-you to filter which controls will be added. Set it to NULL if you want to add
-all controls.
-
-Or you can add specific controls to a handler:
-
-.. code-block:: c
-
-	volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
-	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
-	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_CONTRAST, ...);
-
-What you should not do is make two identical controls for two handlers.
-For example:
-
-.. code-block:: c
-
-	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
-	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_AUDIO_MUTE, ...);
-
-This would be bad since muting the radio would not change the video mute
-control. The rule is to have one control for each hardware 'knob' that you
-can twiddle.
-
-
-Finding Controls
-----------------
-
-Normally you have created the controls yourself and you can store the struct
-v4l2_ctrl pointer into your own struct.
-
-But sometimes you need to find a control from another handler that you do
-not own. For example, if you have to find a volume control from a subdev.
-
-You can do that by calling v4l2_ctrl_find:
-
-.. code-block:: c
-
-	struct v4l2_ctrl *volume;
-
-	volume = v4l2_ctrl_find(sd->ctrl_handler, V4L2_CID_AUDIO_VOLUME);
-
-Since v4l2_ctrl_find will lock the handler you have to be careful where you
-use it. For example, this is not a good idea:
-
-.. code-block:: c
-
-	struct v4l2_ctrl_handler ctrl_handler;
-
-	v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
-	v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
-
-...and in video_ops.s_ctrl:
-
-.. code-block:: c
-
-	case V4L2_CID_BRIGHTNESS:
-		contrast = v4l2_find_ctrl(&ctrl_handler, V4L2_CID_CONTRAST);
-		...
-
-When s_ctrl is called by the framework the ctrl_handler.lock is already taken, so
-attempting to find another control from the same handler will deadlock.
-
-It is recommended not to use this function from inside the control ops.
-
-
-Preventing Controls inheritance
--------------------------------
-
-When one control handler is added to another using v4l2_ctrl_add_handler, then
-by default all controls from one are merged to the other. But a subdev might
-have low-level controls that make sense for some advanced embedded system, but
-not when it is used in consumer-level hardware. In that case you want to keep
-those low-level controls local to the subdev. You can do this by simply
-setting the 'is_private' flag of the control to 1:
-
-.. code-block:: c
-
-	static const struct v4l2_ctrl_config ctrl_private = {
-		.ops = &ctrl_custom_ops,
-		.id = V4L2_CID_...,
-		.name = "Some Private Control",
-		.type = V4L2_CTRL_TYPE_INTEGER,
-		.max = 15,
-		.step = 1,
-		.is_private = 1,
-	};
-
-	ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_private, NULL);
-
-These controls will now be skipped when v4l2_ctrl_add_handler is called.
-
-
-V4L2_CTRL_TYPE_CTRL_CLASS Controls
-----------------------------------
-
-Controls of this type can be used by GUIs to get the name of the control class.
-A fully featured GUI can make a dialog with multiple tabs with each tab
-containing the controls belonging to a particular control class. The name of
-each tab can be found by querying a special control with ID <control class | 1>.
-
-Drivers do not have to care about this. The framework will automatically add
-a control of this type whenever the first control belonging to a new control
-class is added.
-
-
-Adding Notify Callbacks
------------------------
-
-Sometimes the platform or bridge driver needs to be notified when a control
-from a sub-device driver changes. You can set a notify callback by calling
-this function:
-
-.. code-block:: c
-
-	void v4l2_ctrl_notify(struct v4l2_ctrl *ctrl,
-		void (*notify)(struct v4l2_ctrl *ctrl, void *priv), void *priv);
-
-Whenever the give control changes value the notify callback will be called
-with a pointer to the control and the priv pointer that was passed with
-v4l2_ctrl_notify. Note that the control's handler lock is held when the
-notify function is called.
-
-There can be only one notify function per control handler. Any attempt
-to set another notify function will cause a WARN_ON.
-
-v4l2_ctrl functions and data structures
----------------------------------------
-
-.. kernel-doc:: include/media/v4l2-ctrls.h
diff --git a/Documentation/media/kapi/v4l2-core.rst b/Documentation/media/kapi/v4l2-core.rst
deleted file mode 100644
index 0dcad7a23141..000000000000
--- a/Documentation/media/kapi/v4l2-core.rst
+++ /dev/null
@@ -1,29 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Video4Linux devices
--------------------
-
-.. toctree::
-    :maxdepth: 1
-
-    v4l2-intro
-    v4l2-dev
-    v4l2-device
-    v4l2-fh
-    v4l2-subdev
-    v4l2-event
-    v4l2-controls
-    v4l2-videobuf
-    v4l2-videobuf2
-    v4l2-clocks
-    v4l2-dv-timings
-    v4l2-flash-led-class
-    v4l2-mc
-    v4l2-mediabus
-    v4l2-mem2mem
-    v4l2-async
-    v4l2-fwnode
-    v4l2-rect
-    v4l2-tuner
-    v4l2-common
-    v4l2-tveeprom
diff --git a/Documentation/media/kapi/v4l2-dev.rst b/Documentation/media/kapi/v4l2-dev.rst
deleted file mode 100644
index 63c064837c00..000000000000
--- a/Documentation/media/kapi/v4l2-dev.rst
+++ /dev/null
@@ -1,375 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Video device' s internal representation
-=======================================
-
-The actual device nodes in the ``/dev`` directory are created using the
-:c:type:`video_device` struct (``v4l2-dev.h``). This struct can either be
-allocated dynamically or embedded in a larger struct.
-
-To allocate it dynamically use :c:func:`video_device_alloc`:
-
-.. code-block:: c
-
-	struct video_device *vdev = video_device_alloc();
-
-	if (vdev == NULL)
-		return -ENOMEM;
-
-	vdev->release = video_device_release;
-
-If you embed it in a larger struct, then you must set the ``release()``
-callback to your own function:
-
-.. code-block:: c
-
-	struct video_device *vdev = &my_vdev->vdev;
-
-	vdev->release = my_vdev_release;
-
-The ``release()`` callback must be set and it is called when the last user
-of the video device exits.
-
-The default :c:func:`video_device_release` callback currently
-just calls ``kfree`` to free the allocated memory.
-
-There is also a :c:func:`video_device_release_empty` function that does
-nothing (is empty) and should be used if the struct is embedded and there
-is nothing to do when it is released.
-
-You should also set these fields of :c:type:`video_device`:
-
-- :c:type:`video_device`->v4l2_dev: must be set to the :c:type:`v4l2_device`
-  parent device.
-
-- :c:type:`video_device`->name: set to something descriptive and unique.
-
-- :c:type:`video_device`->vfl_dir: set this to ``VFL_DIR_RX`` for capture
-  devices (``VFL_DIR_RX`` has value 0, so this is normally already the
-  default), set to ``VFL_DIR_TX`` for output devices and ``VFL_DIR_M2M`` for mem2mem (codec) devices.
-
-- :c:type:`video_device`->fops: set to the :c:type:`v4l2_file_operations`
-  struct.
-
-- :c:type:`video_device`->ioctl_ops: if you use the :c:type:`v4l2_ioctl_ops`
-  to simplify ioctl maintenance (highly recommended to use this and it might
-  become compulsory in the future!), then set this to your
-  :c:type:`v4l2_ioctl_ops` struct. The :c:type:`video_device`->vfl_type and
-  :c:type:`video_device`->vfl_dir fields are used to disable ops that do not
-  match the type/dir combination. E.g. VBI ops are disabled for non-VBI nodes,
-  and output ops  are disabled for a capture device. This makes it possible to
-  provide just one :c:type:`v4l2_ioctl_ops` struct for both vbi and
-  video nodes.
-
-- :c:type:`video_device`->lock: leave to ``NULL`` if you want to do all the
-  locking  in the driver. Otherwise you give it a pointer to a struct
-  ``mutex_lock`` and before the :c:type:`video_device`->unlocked_ioctl
-  file operation is called this lock will be taken by the core and released
-  afterwards. See the next section for more details.
-
-- :c:type:`video_device`->queue: a pointer to the struct :c:type:`vb2_queue`
-  associated with this device node.
-  If queue is not ``NULL``, and queue->lock is not ``NULL``, then queue->lock
-  is used for the queuing ioctls (``VIDIOC_REQBUFS``, ``CREATE_BUFS``,
-  ``QBUF``, ``DQBUF``,  ``QUERYBUF``, ``PREPARE_BUF``, ``STREAMON`` and
-  ``STREAMOFF``) instead of the lock above.
-  That way the :ref:`vb2 <vb2_framework>` queuing framework does not have
-  to wait for other ioctls.   This queue pointer is also used by the
-  :ref:`vb2 <vb2_framework>` helper functions to check for
-  queuing ownership (i.e. is the filehandle calling it allowed to do the
-  operation).
-
-- :c:type:`video_device`->prio: keeps track of the priorities. Used to
-  implement ``VIDIOC_G_PRIORITY`` and ``VIDIOC_S_PRIORITY``.
-  If left to ``NULL``, then it will use the struct :c:type:`v4l2_prio_state`
-  in :c:type:`v4l2_device`. If you want to have a separate priority state per
-  (group of) device node(s),   then you can point it to your own struct
-  :c:type:`v4l2_prio_state`.
-
-- :c:type:`video_device`->dev_parent: you only set this if v4l2_device was
-  registered with ``NULL`` as the parent ``device`` struct. This only happens
-  in cases where one hardware device has multiple PCI devices that all share
-  the same :c:type:`v4l2_device` core.
-
-  The cx88 driver is an example of this: one core :c:type:`v4l2_device` struct,
-  but   it is used by both a raw video PCI device (cx8800) and a MPEG PCI device
-  (cx8802). Since the :c:type:`v4l2_device` cannot be associated with two PCI
-  devices at the same time it is setup without a parent device. But when the
-  struct :c:type:`video_device` is initialized you **do** know which parent
-  PCI device to use and so you set ``dev_device`` to the correct PCI device.
-
-If you use :c:type:`v4l2_ioctl_ops`, then you should set
-:c:type:`video_device`->unlocked_ioctl to :c:func:`video_ioctl2` in your
-:c:type:`v4l2_file_operations` struct.
-
-In some cases you want to tell the core that a function you had specified in
-your :c:type:`v4l2_ioctl_ops` should be ignored. You can mark such ioctls by
-calling this function before :c:func:`video_register_device` is called:
-
-	:c:func:`v4l2_disable_ioctl <v4l2_disable_ioctl>`
-	(:c:type:`vdev <video_device>`, cmd).
-
-This tends to be needed if based on external factors (e.g. which card is
-being used) you want to turns off certain features in :c:type:`v4l2_ioctl_ops`
-without having to make a new struct.
-
-The :c:type:`v4l2_file_operations` struct is a subset of file_operations.
-The main difference is that the inode argument is omitted since it is never
-used.
-
-If integration with the media framework is needed, you must initialize the
-:c:type:`media_entity` struct embedded in the :c:type:`video_device` struct
-(entity field) by calling :c:func:`media_entity_pads_init`:
-
-.. code-block:: c
-
-	struct media_pad *pad = &my_vdev->pad;
-	int err;
-
-	err = media_entity_pads_init(&vdev->entity, 1, pad);
-
-The pads array must have been previously initialized. There is no need to
-manually set the struct media_entity type and name fields.
-
-A reference to the entity will be automatically acquired/released when the
-video device is opened/closed.
-
-ioctls and locking
-------------------
-
-The V4L core provides optional locking services. The main service is the
-lock field in struct :c:type:`video_device`, which is a pointer to a mutex.
-If you set this pointer, then that will be used by unlocked_ioctl to
-serialize all ioctls.
-
-If you are using the :ref:`videobuf2 framework <vb2_framework>`, then there
-is a second lock that you can set: :c:type:`video_device`->queue->lock. If
-set, then this lock will be used instead of :c:type:`video_device`->lock
-to serialize all queuing ioctls (see the previous section
-for the full list of those ioctls).
-
-The advantage of using a different lock for the queuing ioctls is that for some
-drivers (particularly USB drivers) certain commands such as setting controls
-can take a long time, so you want to use a separate lock for the buffer queuing
-ioctls. That way your ``VIDIOC_DQBUF`` doesn't stall because the driver is busy
-changing the e.g. exposure of the webcam.
-
-Of course, you can always do all the locking yourself by leaving both lock
-pointers at ``NULL``.
-
-If you use the old :ref:`videobuf framework <vb_framework>` then you must
-pass the :c:type:`video_device`->lock to the videobuf queue initialize
-function: if videobuf has to wait for a frame to arrive, then it will
-temporarily unlock the lock and relock it afterwards. If your driver also
-waits in the code, then you should do the same to allow other
-processes to access the device node while the first process is waiting for
-something.
-
-In the case of :ref:`videobuf2 <vb2_framework>` you will need to implement the
-``wait_prepare()`` and ``wait_finish()`` callbacks to unlock/lock if applicable.
-If you use the ``queue->lock`` pointer, then you can use the helper functions
-:c:func:`vb2_ops_wait_prepare` and :c:func:`vb2_ops_wait_finish`.
-
-The implementation of a hotplug disconnect should also take the lock from
-:c:type:`video_device` before calling v4l2_device_disconnect. If you are also
-using :c:type:`video_device`->queue->lock, then you have to first lock
-:c:type:`video_device`->queue->lock followed by :c:type:`video_device`->lock.
-That way you can be sure no ioctl is running when you call
-:c:func:`v4l2_device_disconnect`.
-
-Video device registration
--------------------------
-
-Next you register the video device with :c:func:`video_register_device`.
-This will create the character device for you.
-
-.. code-block:: c
-
-	err = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
-	if (err) {
-		video_device_release(vdev); /* or kfree(my_vdev); */
-		return err;
-	}
-
-If the :c:type:`v4l2_device` parent device has a not ``NULL`` mdev field,
-the video device entity will be automatically registered with the media
-device.
-
-Which device is registered depends on the type argument. The following
-types exist:
-
-========================== ====================	 ==============================
-:c:type:`vfl_devnode_type` Device name		 Usage
-========================== ====================	 ==============================
-``VFL_TYPE_VIDEO``         ``/dev/videoX``       for video input/output devices
-``VFL_TYPE_VBI``           ``/dev/vbiX``         for vertical blank data (i.e.
-						 closed captions, teletext)
-``VFL_TYPE_RADIO``         ``/dev/radioX``       for radio tuners
-``VFL_TYPE_SUBDEV``        ``/dev/v4l-subdevX``  for V4L2 subdevices
-``VFL_TYPE_SDR``           ``/dev/swradioX``     for Software Defined Radio
-						 (SDR) tuners
-``VFL_TYPE_TOUCH``         ``/dev/v4l-touchX``   for touch sensors
-========================== ====================	 ==============================
-
-The last argument gives you a certain amount of control over the device
-device node number used (i.e. the X in ``videoX``). Normally you will pass -1
-to let the v4l2 framework pick the first free number. But sometimes users
-want to select a specific node number. It is common that drivers allow
-the user to select a specific device node number through a driver module
-option. That number is then passed to this function and video_register_device
-will attempt to select that device node number. If that number was already
-in use, then the next free device node number will be selected and it
-will send a warning to the kernel log.
-
-Another use-case is if a driver creates many devices. In that case it can
-be useful to place different video devices in separate ranges. For example,
-video capture devices start at 0, video output devices start at 16.
-So you can use the last argument to specify a minimum device node number
-and the v4l2 framework will try to pick the first free number that is equal
-or higher to what you passed. If that fails, then it will just pick the
-first free number.
-
-Since in this case you do not care about a warning about not being able
-to select the specified device node number, you can call the function
-:c:func:`video_register_device_no_warn` instead.
-
-Whenever a device node is created some attributes are also created for you.
-If you look in ``/sys/class/video4linux`` you see the devices. Go into e.g.
-``video0`` and you will see 'name', 'dev_debug' and 'index' attributes. The
-'name' attribute is the 'name' field of the video_device struct. The
-'dev_debug' attribute can be used to enable core debugging. See the next
-section for more detailed information on this.
-
-The 'index' attribute is the index of the device node: for each call to
-:c:func:`video_register_device()` the index is just increased by 1. The
-first video device node you register always starts with index 0.
-
-Users can setup udev rules that utilize the index attribute to make fancy
-device names (e.g. '``mpegX``' for MPEG video capture device nodes).
-
-After the device was successfully registered, then you can use these fields:
-
-- :c:type:`video_device`->vfl_type: the device type passed to
-  :c:func:`video_register_device`.
-- :c:type:`video_device`->minor: the assigned device minor number.
-- :c:type:`video_device`->num: the device node number (i.e. the X in
-  ``videoX``).
-- :c:type:`video_device`->index: the device index number.
-
-If the registration failed, then you need to call
-:c:func:`video_device_release` to free the allocated :c:type:`video_device`
-struct, or free your own struct if the :c:type:`video_device` was embedded in
-it. The ``vdev->release()`` callback will never be called if the registration
-failed, nor should you ever attempt to unregister the device if the
-registration failed.
-
-video device debugging
-----------------------
-
-The 'dev_debug' attribute that is created for each video, vbi, radio or swradio
-device in ``/sys/class/video4linux/<devX>/`` allows you to enable logging of
-file operations.
-
-It is a bitmask and the following bits can be set:
-
-.. tabularcolumns:: |p{5ex}|L|
-
-===== ================================================================
-Mask  Description
-===== ================================================================
-0x01  Log the ioctl name and error code. VIDIOC_(D)QBUF ioctls are
-      only logged if bit 0x08 is also set.
-0x02  Log the ioctl name arguments and error code. VIDIOC_(D)QBUF
-      ioctls are
-      only logged if bit 0x08 is also set.
-0x04  Log the file operations open, release, read, write, mmap and
-      get_unmapped_area. The read and write operations are only
-      logged if bit 0x08 is also set.
-0x08  Log the read and write file operations and the VIDIOC_QBUF and
-      VIDIOC_DQBUF ioctls.
-0x10  Log the poll file operation.
-0x20  Log error and messages in the control operations.
-===== ================================================================
-
-Video device cleanup
---------------------
-
-When the video device nodes have to be removed, either during the unload
-of the driver or because the USB device was disconnected, then you should
-unregister them with:
-
-	:c:func:`video_unregister_device`
-	(:c:type:`vdev <video_device>`);
-
-This will remove the device nodes from sysfs (causing udev to remove them
-from ``/dev``).
-
-After :c:func:`video_unregister_device` returns no new opens can be done.
-However, in the case of USB devices some application might still have one of
-these device nodes open. So after the unregister all file operations (except
-release, of course) will return an error as well.
-
-When the last user of the video device node exits, then the ``vdev->release()``
-callback is called and you can do the final cleanup there.
-
-Don't forget to cleanup the media entity associated with the video device if
-it has been initialized:
-
-	:c:func:`media_entity_cleanup <media_entity_cleanup>`
-	(&vdev->entity);
-
-This can be done from the release callback.
-
-
-helper functions
-----------------
-
-There are a few useful helper functions:
-
-- file and :c:type:`video_device` private data
-
-You can set/get driver private data in the video_device struct using:
-
-	:c:func:`video_get_drvdata <video_get_drvdata>`
-	(:c:type:`vdev <video_device>`);
-
-	:c:func:`video_set_drvdata <video_set_drvdata>`
-	(:c:type:`vdev <video_device>`);
-
-Note that you can safely call :c:func:`video_set_drvdata` before calling
-:c:func:`video_register_device`.
-
-And this function:
-
-	:c:func:`video_devdata <video_devdata>`
-	(struct file \*file);
-
-returns the video_device belonging to the file struct.
-
-The :c:func:`video_devdata` function combines :c:func:`video_get_drvdata`
-with :c:func:`video_devdata`:
-
-	:c:func:`video_drvdata <video_drvdata>`
-	(struct file \*file);
-
-You can go from a :c:type:`video_device` struct to the v4l2_device struct using:
-
-.. code-block:: c
-
-	struct v4l2_device *v4l2_dev = vdev->v4l2_dev;
-
-- Device node name
-
-The :c:type:`video_device` node kernel name can be retrieved using:
-
-	:c:func:`video_device_node_name <video_device_node_name>`
-	(:c:type:`vdev <video_device>`);
-
-The name is used as a hint by userspace tools such as udev. The function
-should be used where possible instead of accessing the video_device::num and
-video_device::minor fields.
-
-video_device functions and data structures
-------------------------------------------
-
-.. kernel-doc:: include/media/v4l2-dev.h
diff --git a/Documentation/media/kapi/v4l2-device.rst b/Documentation/media/kapi/v4l2-device.rst
deleted file mode 100644
index 5e25bf182c18..000000000000
--- a/Documentation/media/kapi/v4l2-device.rst
+++ /dev/null
@@ -1,146 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 device instance
---------------------
-
-Each device instance is represented by a struct :c:type:`v4l2_device`.
-Very simple devices can just allocate this struct, but most of the time you
-would embed this struct inside a larger struct.
-
-You must register the device instance by calling:
-
-	:c:func:`v4l2_device_register <v4l2_device_register>`
-	(dev, :c:type:`v4l2_dev <v4l2_device>`).
-
-Registration will initialize the :c:type:`v4l2_device` struct. If the
-dev->driver_data field is ``NULL``, it will be linked to
-:c:type:`v4l2_dev <v4l2_device>` argument.
-
-Drivers that want integration with the media device framework need to set
-dev->driver_data manually to point to the driver-specific device structure
-that embed the struct :c:type:`v4l2_device` instance. This is achieved by a
-``dev_set_drvdata()`` call before registering the V4L2 device instance.
-They must also set the struct :c:type:`v4l2_device` mdev field to point to a
-properly initialized and registered :c:type:`media_device` instance.
-
-If :c:type:`v4l2_dev <v4l2_device>`\ ->name is empty then it will be set to a
-value derived from dev (driver name followed by the bus_id, to be precise).
-If you set it up before  calling :c:func:`v4l2_device_register` then it will
-be untouched. If dev is ``NULL``, then you **must** setup
-:c:type:`v4l2_dev <v4l2_device>`\ ->name before calling
-:c:func:`v4l2_device_register`.
-
-You can use :c:func:`v4l2_device_set_name` to set the name based on a driver
-name and a driver-global atomic_t instance. This will generate names like
-``ivtv0``, ``ivtv1``, etc. If the name ends with a digit, then it will insert
-a dash: ``cx18-0``, ``cx18-1``, etc. This function returns the instance number.
-
-The first ``dev`` argument is normally the ``struct device`` pointer of a
-``pci_dev``, ``usb_interface`` or ``platform_device``. It is rare for dev to
-be ``NULL``, but it happens with ISA devices or when one device creates
-multiple PCI devices, thus making it impossible to associate
-:c:type:`v4l2_dev <v4l2_device>` with a particular parent.
-
-You can also supply a ``notify()`` callback that can be called by sub-devices
-to notify you of events. Whether you need to set this depends on the
-sub-device. Any notifications a sub-device supports must be defined in a header
-in ``include/media/subdevice.h``.
-
-V4L2 devices are unregistered by calling:
-
-	:c:func:`v4l2_device_unregister`
-	(:c:type:`v4l2_dev <v4l2_device>`).
-
-If the dev->driver_data field points to :c:type:`v4l2_dev <v4l2_device>`,
-it will be reset to ``NULL``. Unregistering will also automatically unregister
-all subdevs from the device.
-
-If you have a hotpluggable device (e.g. a USB device), then when a disconnect
-happens the parent device becomes invalid. Since :c:type:`v4l2_device` has a
-pointer to that parent device it has to be cleared as well to mark that the
-parent is gone. To do this call:
-
-	:c:func:`v4l2_device_disconnect`
-	(:c:type:`v4l2_dev <v4l2_device>`).
-
-This does *not* unregister the subdevs, so you still need to call the
-:c:func:`v4l2_device_unregister` function for that. If your driver is not
-hotpluggable, then there is no need to call :c:func:`v4l2_device_disconnect`.
-
-Sometimes you need to iterate over all devices registered by a specific
-driver. This is usually the case if multiple device drivers use the same
-hardware. E.g. the ivtvfb driver is a framebuffer driver that uses the ivtv
-hardware. The same is true for alsa drivers for example.
-
-You can iterate over all registered devices as follows:
-
-.. code-block:: c
-
-	static int callback(struct device *dev, void *p)
-	{
-		struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
-
-		/* test if this device was inited */
-		if (v4l2_dev == NULL)
-			return 0;
-		...
-		return 0;
-	}
-
-	int iterate(void *p)
-	{
-		struct device_driver *drv;
-		int err;
-
-		/* Find driver 'ivtv' on the PCI bus.
-		pci_bus_type is a global. For USB buses use usb_bus_type. */
-		drv = driver_find("ivtv", &pci_bus_type);
-		/* iterate over all ivtv device instances */
-		err = driver_for_each_device(drv, NULL, p, callback);
-		put_driver(drv);
-		return err;
-	}
-
-Sometimes you need to keep a running counter of the device instance. This is
-commonly used to map a device instance to an index of a module option array.
-
-The recommended approach is as follows:
-
-.. code-block:: c
-
-	static atomic_t drv_instance = ATOMIC_INIT(0);
-
-	static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
-	{
-		...
-		state->instance = atomic_inc_return(&drv_instance) - 1;
-	}
-
-If you have multiple device nodes then it can be difficult to know when it is
-safe to unregister :c:type:`v4l2_device` for hotpluggable devices. For this
-purpose :c:type:`v4l2_device` has refcounting support. The refcount is
-increased whenever :c:func:`video_register_device` is called and it is
-decreased whenever that device node is released. When the refcount reaches
-zero, then the :c:type:`v4l2_device` release() callback is called. You can
-do your final cleanup there.
-
-If other device nodes (e.g. ALSA) are created, then you can increase and
-decrease the refcount manually as well by calling:
-
-	:c:func:`v4l2_device_get`
-	(:c:type:`v4l2_dev <v4l2_device>`).
-
-or:
-
-	:c:func:`v4l2_device_put`
-	(:c:type:`v4l2_dev <v4l2_device>`).
-
-Since the initial refcount is 1 you also need to call
-:c:func:`v4l2_device_put` in the ``disconnect()`` callback (for USB devices)
-or in the ``remove()`` callback (for e.g. PCI devices), otherwise the refcount
-will never reach 0.
-
-v4l2_device functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-device.h
diff --git a/Documentation/media/kapi/v4l2-dv-timings.rst b/Documentation/media/kapi/v4l2-dv-timings.rst
deleted file mode 100644
index b178f931518b..000000000000
--- a/Documentation/media/kapi/v4l2-dv-timings.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 DV Timings functions
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-dv-timings.h
diff --git a/Documentation/media/kapi/v4l2-event.rst b/Documentation/media/kapi/v4l2-event.rst
deleted file mode 100644
index a4b7ae2b94d8..000000000000
--- a/Documentation/media/kapi/v4l2-event.rst
+++ /dev/null
@@ -1,181 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 events
------------
-
-The V4L2 events provide a generic way to pass events to user space.
-The driver must use :c:type:`v4l2_fh` to be able to support V4L2 events.
-
-Events are subscribed per-filehandle. An event specification consists of a
-``type`` and is optionally associated with an object identified through the
-``id`` field. If unused, then the ``id`` is 0. So an event is uniquely
-identified by the ``(type, id)`` tuple.
-
-The :c:type:`v4l2_fh` struct has a list of subscribed events on its
-``subscribed`` field.
-
-When the user subscribes to an event, a :c:type:`v4l2_subscribed_event`
-struct is added to :c:type:`v4l2_fh`\ ``.subscribed``, one for every
-subscribed event.
-
-Each :c:type:`v4l2_subscribed_event` struct ends with a
-:c:type:`v4l2_kevent` ringbuffer, with the size given by the caller
-of :c:func:`v4l2_event_subscribe`. This ringbuffer is used to store any events
-raised by the driver.
-
-So every ``(type, ID)`` event tuple will have its own
-:c:type:`v4l2_kevent` ringbuffer. This guarantees that if a driver is
-generating lots of events of one type in a short time, then that will
-not overwrite events of another type.
-
-But if you get more events of one type than the size of the
-:c:type:`v4l2_kevent` ringbuffer, then the oldest event will be dropped
-and the new one added.
-
-The :c:type:`v4l2_kevent` struct links into the ``available``
-list of the :c:type:`v4l2_fh` struct so :ref:`VIDIOC_DQEVENT` will
-know which event to dequeue first.
-
-Finally, if the event subscription is associated with a particular object
-such as a V4L2 control, then that object needs to know about that as well
-so that an event can be raised by that object. So the ``node`` field can
-be used to link the :c:type:`v4l2_subscribed_event` struct into a list of
-such objects.
-
-So to summarize:
-
-- struct :c:type:`v4l2_fh` has two lists: one of the ``subscribed`` events,
-  and one of the ``available`` events.
-
-- struct :c:type:`v4l2_subscribed_event` has a ringbuffer of raised
-  (pending) events of that particular type.
-
-- If struct :c:type:`v4l2_subscribed_event` is associated with a specific
-  object, then that object will have an internal list of
-  struct :c:type:`v4l2_subscribed_event` so it knows who subscribed an
-  event to that object.
-
-Furthermore, the internal struct :c:type:`v4l2_subscribed_event` has
-``merge()`` and ``replace()`` callbacks which drivers can set. These
-callbacks are called when a new event is raised and there is no more room.
-
-The ``replace()`` callback allows you to replace the payload of the old event
-with that of the new event, merging any relevant data from the old payload
-into the new payload that replaces it. It is called when this event type has
-a ringbuffer with size is one, i.e. only one event can be stored in the
-ringbuffer.
-
-The ``merge()`` callback allows you to merge the oldest event payload into
-that of the second-oldest event payload. It is called when
-the ringbuffer has size is greater than one.
-
-This way no status information is lost, just the intermediate steps leading
-up to that state.
-
-A good example of these ``replace``/``merge`` callbacks is in v4l2-event.c:
-``ctrls_replace()`` and ``ctrls_merge()`` callbacks for the control event.
-
-.. note::
-	these callbacks can be called from interrupt context, so they must
-	be fast.
-
-In order to queue events to video device, drivers should call:
-
-	:c:func:`v4l2_event_queue <v4l2_event_queue>`
-	(:c:type:`vdev <video_device>`, :c:type:`ev <v4l2_event>`)
-
-The driver's only responsibility is to fill in the type and the data fields.
-The other fields will be filled in by V4L2.
-
-Event subscription
-~~~~~~~~~~~~~~~~~~
-
-Subscribing to an event is via:
-
-	:c:func:`v4l2_event_subscribe <v4l2_event_subscribe>`
-	(:c:type:`fh <v4l2_fh>`, :c:type:`sub <v4l2_event_subscription>` ,
-	elems, :c:type:`ops <v4l2_subscribed_event_ops>`)
-
-
-This function is used to implement :c:type:`video_device`->
-:c:type:`ioctl_ops <v4l2_ioctl_ops>`-> ``vidioc_subscribe_event``,
-but the driver must check first if the driver is able to produce events
-with specified event id, and then should call
-:c:func:`v4l2_event_subscribe` to subscribe the event.
-
-The elems argument is the size of the event queue for this event. If it is 0,
-then the framework will fill in a default value (this depends on the event
-type).
-
-The ops argument allows the driver to specify a number of callbacks:
-
-.. tabularcolumns:: |p{1.5cm}|p{16.0cm}|
-
-======== ==============================================================
-Callback Description
-======== ==============================================================
-add      called when a new listener gets added (subscribing to the same
-	 event twice will only cause this callback to get called once)
-del      called when a listener stops listening
-replace  replace event 'old' with event 'new'.
-merge    merge event 'old' into event 'new'.
-======== ==============================================================
-
-All 4 callbacks are optional, if you don't want to specify any callbacks
-the ops argument itself maybe ``NULL``.
-
-Unsubscribing an event
-~~~~~~~~~~~~~~~~~~~~~~
-
-Unsubscribing to an event is via:
-
-	:c:func:`v4l2_event_unsubscribe <v4l2_event_unsubscribe>`
-	(:c:type:`fh <v4l2_fh>`, :c:type:`sub <v4l2_event_subscription>`)
-
-This function is used to implement :c:type:`video_device`->
-:c:type:`ioctl_ops <v4l2_ioctl_ops>`-> ``vidioc_unsubscribe_event``.
-A driver may call :c:func:`v4l2_event_unsubscribe` directly unless it
-wants to be involved in unsubscription process.
-
-The special type ``V4L2_EVENT_ALL`` may be used to unsubscribe all events. The
-drivers may want to handle this in a special way.
-
-Check if there's a pending event
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Checking if there's a pending event is via:
-
-	:c:func:`v4l2_event_pending <v4l2_event_pending>`
-	(:c:type:`fh <v4l2_fh>`)
-
-
-This function returns the number of pending events. Useful when implementing
-poll.
-
-How events work
-~~~~~~~~~~~~~~~
-
-Events are delivered to user space through the poll system call. The driver
-can use :c:type:`v4l2_fh`->wait (a wait_queue_head_t) as the argument for
-``poll_wait()``.
-
-There are standard and private events. New standard events must use the
-smallest available event type. The drivers must allocate their events from
-their own class starting from class base. Class base is
-``V4L2_EVENT_PRIVATE_START`` + n * 1000 where n is the lowest available number.
-The first event type in the class is reserved for future use, so the first
-available event type is 'class base + 1'.
-
-An example on how the V4L2 events may be used can be found in the OMAP
-3 ISP driver (``drivers/media/platform/omap3isp``).
-
-A subdev can directly send an event to the :c:type:`v4l2_device` notify
-function with ``V4L2_DEVICE_NOTIFY_EVENT``. This allows the bridge to map
-the subdev that sends the event to the video node(s) associated with the
-subdev that need to be informed about such an event.
-
-V4L2 event functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-event.h
-
diff --git a/Documentation/media/kapi/v4l2-fh.rst b/Documentation/media/kapi/v4l2-fh.rst
deleted file mode 100644
index 4c62b19af744..000000000000
--- a/Documentation/media/kapi/v4l2-fh.rst
+++ /dev/null
@@ -1,141 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 File handlers
-------------------
-
-struct :c:type:`v4l2_fh` provides a way to easily keep file handle specific
-data that is used by the V4L2 framework.
-
-.. attention::
-	New drivers must use struct :c:type:`v4l2_fh`
-	since it is also used to implement priority handling
-	(:ref:`VIDIOC_G_PRIORITY`).
-
-The users of :c:type:`v4l2_fh` (in the V4L2 framework, not the driver) know
-whether a driver uses :c:type:`v4l2_fh` as its ``file->private_data`` pointer
-by testing the ``V4L2_FL_USES_V4L2_FH`` bit in :c:type:`video_device`->flags.
-This bit is set whenever :c:func:`v4l2_fh_init` is called.
-
-struct :c:type:`v4l2_fh` is allocated as a part of the driver's own file handle
-structure and ``file->private_data`` is set to it in the driver's ``open()``
-function by the driver.
-
-In many cases the struct :c:type:`v4l2_fh` will be embedded in a larger
-structure. In that case you should call:
-
-#) :c:func:`v4l2_fh_init` and :c:func:`v4l2_fh_add` in ``open()``
-#) :c:func:`v4l2_fh_del` and :c:func:`v4l2_fh_exit` in ``release()``
-
-Drivers can extract their own file handle structure by using the container_of
-macro.
-
-Example:
-
-.. code-block:: c
-
-	struct my_fh {
-		int blah;
-		struct v4l2_fh fh;
-	};
-
-	...
-
-	int my_open(struct file *file)
-	{
-		struct my_fh *my_fh;
-		struct video_device *vfd;
-		int ret;
-
-		...
-
-		my_fh = kzalloc(sizeof(*my_fh), GFP_KERNEL);
-
-		...
-
-		v4l2_fh_init(&my_fh->fh, vfd);
-
-		...
-
-		file->private_data = &my_fh->fh;
-		v4l2_fh_add(&my_fh->fh);
-		return 0;
-	}
-
-	int my_release(struct file *file)
-	{
-		struct v4l2_fh *fh = file->private_data;
-		struct my_fh *my_fh = container_of(fh, struct my_fh, fh);
-
-		...
-		v4l2_fh_del(&my_fh->fh);
-		v4l2_fh_exit(&my_fh->fh);
-		kfree(my_fh);
-		return 0;
-	}
-
-Below is a short description of the :c:type:`v4l2_fh` functions used:
-
-:c:func:`v4l2_fh_init <v4l2_fh_init>`
-(:c:type:`fh <v4l2_fh>`, :c:type:`vdev <video_device>`)
-
-
-- Initialise the file handle. This **MUST** be performed in the driver's
-  :c:type:`v4l2_file_operations`->open() handler.
-
-
-:c:func:`v4l2_fh_add <v4l2_fh_add>`
-(:c:type:`fh <v4l2_fh>`)
-
-- Add a :c:type:`v4l2_fh` to :c:type:`video_device` file handle list.
-  Must be called once the file handle is completely initialized.
-
-:c:func:`v4l2_fh_del <v4l2_fh_del>`
-(:c:type:`fh <v4l2_fh>`)
-
-- Unassociate the file handle from :c:type:`video_device`. The file handle
-  exit function may now be called.
-
-:c:func:`v4l2_fh_exit <v4l2_fh_exit>`
-(:c:type:`fh <v4l2_fh>`)
-
-- Uninitialise the file handle. After uninitialisation the :c:type:`v4l2_fh`
-  memory can be freed.
-
-
-If struct :c:type:`v4l2_fh` is not embedded, then you can use these helper functions:
-
-:c:func:`v4l2_fh_open <v4l2_fh_open>`
-(struct file \*filp)
-
-- This allocates a struct :c:type:`v4l2_fh`, initializes it and adds it to
-  the struct :c:type:`video_device` associated with the file struct.
-
-:c:func:`v4l2_fh_release <v4l2_fh_release>`
-(struct file \*filp)
-
-- This deletes it from the struct :c:type:`video_device` associated with the
-  file struct, uninitialised the :c:type:`v4l2_fh` and frees it.
-
-These two functions can be plugged into the v4l2_file_operation's ``open()``
-and ``release()`` ops.
-
-Several drivers need to do something when the first file handle is opened and
-when the last file handle closes. Two helper functions were added to check
-whether the :c:type:`v4l2_fh` struct is the only open filehandle of the
-associated device node:
-
-:c:func:`v4l2_fh_is_singular <v4l2_fh_is_singular>`
-(:c:type:`fh <v4l2_fh>`)
-
--  Returns 1 if the file handle is the only open file handle, else 0.
-
-:c:func:`v4l2_fh_is_singular_file <v4l2_fh_is_singular_file>`
-(struct file \*filp)
-
-- Same, but it calls v4l2_fh_is_singular with filp->private_data.
-
-
-V4L2 fh functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-fh.h
diff --git a/Documentation/media/kapi/v4l2-flash-led-class.rst b/Documentation/media/kapi/v4l2-flash-led-class.rst
deleted file mode 100644
index 2aa6bed9b8db..000000000000
--- a/Documentation/media/kapi/v4l2-flash-led-class.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 flash functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-flash-led-class.h
diff --git a/Documentation/media/kapi/v4l2-fwnode.rst b/Documentation/media/kapi/v4l2-fwnode.rst
deleted file mode 100644
index e313b6cddcd0..000000000000
--- a/Documentation/media/kapi/v4l2-fwnode.rst
+++ /dev/null
@@ -1,5 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 fwnode kAPI
-^^^^^^^^^^^^^^^^
-.. kernel-doc:: include/media/v4l2-fwnode.h
diff --git a/Documentation/media/kapi/v4l2-intro.rst b/Documentation/media/kapi/v4l2-intro.rst
deleted file mode 100644
index 4d54fa9d7a12..000000000000
--- a/Documentation/media/kapi/v4l2-intro.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Introduction
-------------
-
-The V4L2 drivers tend to be very complex due to the complexity of the
-hardware: most devices have multiple ICs, export multiple device nodes in
-/dev, and create also non-V4L2 devices such as DVB, ALSA, FB, I2C and input
-(IR) devices.
-
-Especially the fact that V4L2 drivers have to setup supporting ICs to
-do audio/video muxing/encoding/decoding makes it more complex than most.
-Usually these ICs are connected to the main bridge driver through one or
-more I2C buses, but other buses can also be used. Such devices are
-called 'sub-devices'.
-
-For a long time the framework was limited to the video_device struct for
-creating V4L device nodes and video_buf for handling the video buffers
-(note that this document does not discuss the video_buf framework).
-
-This meant that all drivers had to do the setup of device instances and
-connecting to sub-devices themselves. Some of this is quite complicated
-to do right and many drivers never did do it correctly.
-
-There is also a lot of common code that could never be refactored due to
-the lack of a framework.
-
-So this framework sets up the basic building blocks that all drivers
-need and this same framework should make it much easier to refactor
-common code into utility functions shared by all drivers.
-
-A good example to look at as a reference is the v4l2-pci-skeleton.c
-source that is available in samples/v4l/. It is a skeleton driver for
-a PCI capture card, and demonstrates how to use the V4L2 driver
-framework. It can be used as a template for real PCI video capture driver.
-
-Structure of a V4L driver
--------------------------
-
-All drivers have the following structure:
-
-1) A struct for each device instance containing the device state.
-
-2) A way of initializing and commanding sub-devices (if any).
-
-3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX and /dev/radioX)
-   and keeping track of device-node specific data.
-
-4) Filehandle-specific structs containing per-filehandle data;
-
-5) video buffer handling.
-
-This is a rough schematic of how it all relates:
-
-.. code-block:: none
-
-    device instances
-      |
-      +-sub-device instances
-      |
-      \-V4L2 device nodes
-	  |
-	  \-filehandle instances
-
-
-Structure of the V4L2 framework
--------------------------------
-
-The framework closely resembles the driver structure: it has a v4l2_device
-struct for the device instance data, a v4l2_subdev struct to refer to
-sub-device instances, the video_device struct stores V4L2 device node data
-and the v4l2_fh struct keeps track of filehandle instances.
-
-The V4L2 framework also optionally integrates with the media framework. If a
-driver sets the struct v4l2_device mdev field, sub-devices and video nodes
-will automatically appear in the media framework as entities.
diff --git a/Documentation/media/kapi/v4l2-mc.rst b/Documentation/media/kapi/v4l2-mc.rst
deleted file mode 100644
index 0c352ac588b2..000000000000
--- a/Documentation/media/kapi/v4l2-mc.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 Media Controller functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-mc.h
diff --git a/Documentation/media/kapi/v4l2-mediabus.rst b/Documentation/media/kapi/v4l2-mediabus.rst
deleted file mode 100644
index 1f2254cba92d..000000000000
--- a/Documentation/media/kapi/v4l2-mediabus.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 Media Bus functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-mediabus.h
diff --git a/Documentation/media/kapi/v4l2-mem2mem.rst b/Documentation/media/kapi/v4l2-mem2mem.rst
deleted file mode 100644
index a43b31cc8261..000000000000
--- a/Documentation/media/kapi/v4l2-mem2mem.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 Memory to Memory functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-mem2mem.h
diff --git a/Documentation/media/kapi/v4l2-rect.rst b/Documentation/media/kapi/v4l2-rect.rst
deleted file mode 100644
index fc315cd84156..000000000000
--- a/Documentation/media/kapi/v4l2-rect.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 rect helper functions
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/v4l2-rect.h
diff --git a/Documentation/media/kapi/v4l2-subdev.rst b/Documentation/media/kapi/v4l2-subdev.rst
deleted file mode 100644
index 29e07e23f888..000000000000
--- a/Documentation/media/kapi/v4l2-subdev.rst
+++ /dev/null
@@ -1,444 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-V4L2 sub-devices
-----------------
-
-Many drivers need to communicate with sub-devices. These devices can do all
-sort of tasks, but most commonly they handle audio and/or video muxing,
-encoding or decoding. For webcams common sub-devices are sensors and camera
-controllers.
-
-Usually these are I2C devices, but not necessarily. In order to provide the
-driver with a consistent interface to these sub-devices the
-:c:type:`v4l2_subdev` struct (v4l2-subdev.h) was created.
-
-Each sub-device driver must have a :c:type:`v4l2_subdev` struct. This struct
-can be stand-alone for simple sub-devices or it might be embedded in a larger
-struct if more state information needs to be stored. Usually there is a
-low-level device struct (e.g. ``i2c_client``) that contains the device data as
-setup by the kernel. It is recommended to store that pointer in the private
-data of :c:type:`v4l2_subdev` using :c:func:`v4l2_set_subdevdata`. That makes
-it easy to go from a :c:type:`v4l2_subdev` to the actual low-level bus-specific
-device data.
-
-You also need a way to go from the low-level struct to :c:type:`v4l2_subdev`.
-For the common i2c_client struct the i2c_set_clientdata() call is used to store
-a :c:type:`v4l2_subdev` pointer, for other buses you may have to use other
-methods.
-
-Bridges might also need to store per-subdev private data, such as a pointer to
-bridge-specific per-subdev private data. The :c:type:`v4l2_subdev` structure
-provides host private data for that purpose that can be accessed with
-:c:func:`v4l2_get_subdev_hostdata` and :c:func:`v4l2_set_subdev_hostdata`.
-
-From the bridge driver perspective, you load the sub-device module and somehow
-obtain the :c:type:`v4l2_subdev` pointer. For i2c devices this is easy: you call
-``i2c_get_clientdata()``. For other buses something similar needs to be done.
-Helper functions exists for sub-devices on an I2C bus that do most of this
-tricky work for you.
-
-Each :c:type:`v4l2_subdev` contains function pointers that sub-device drivers
-can implement (or leave ``NULL`` if it is not applicable). Since sub-devices can
-do so many different things and you do not want to end up with a huge ops struct
-of which only a handful of ops are commonly implemented, the function pointers
-are sorted according to category and each category has its own ops struct.
-
-The top-level ops struct contains pointers to the category ops structs, which
-may be NULL if the subdev driver does not support anything from that category.
-
-It looks like this:
-
-.. code-block:: c
-
-	struct v4l2_subdev_core_ops {
-		int (*log_status)(struct v4l2_subdev *sd);
-		int (*init)(struct v4l2_subdev *sd, u32 val);
-		...
-	};
-
-	struct v4l2_subdev_tuner_ops {
-		...
-	};
-
-	struct v4l2_subdev_audio_ops {
-		...
-	};
-
-	struct v4l2_subdev_video_ops {
-		...
-	};
-
-	struct v4l2_subdev_pad_ops {
-		...
-	};
-
-	struct v4l2_subdev_ops {
-		const struct v4l2_subdev_core_ops  *core;
-		const struct v4l2_subdev_tuner_ops *tuner;
-		const struct v4l2_subdev_audio_ops *audio;
-		const struct v4l2_subdev_video_ops *video;
-		const struct v4l2_subdev_pad_ops *video;
-	};
-
-The core ops are common to all subdevs, the other categories are implemented
-depending on the sub-device. E.g. a video device is unlikely to support the
-audio ops and vice versa.
-
-This setup limits the number of function pointers while still making it easy
-to add new ops and categories.
-
-A sub-device driver initializes the :c:type:`v4l2_subdev` struct using:
-
-	:c:func:`v4l2_subdev_init <v4l2_subdev_init>`
-	(:c:type:`sd <v4l2_subdev>`, &\ :c:type:`ops <v4l2_subdev_ops>`).
-
-
-Afterwards you need to initialize :c:type:`sd <v4l2_subdev>`->name with a
-unique name and set the module owner. This is done for you if you use the
-i2c helper functions.
-
-If integration with the media framework is needed, you must initialize the
-:c:type:`media_entity` struct embedded in the :c:type:`v4l2_subdev` struct
-(entity field) by calling :c:func:`media_entity_pads_init`, if the entity has
-pads:
-
-.. code-block:: c
-
-	struct media_pad *pads = &my_sd->pads;
-	int err;
-
-	err = media_entity_pads_init(&sd->entity, npads, pads);
-
-The pads array must have been previously initialized. There is no need to
-manually set the struct :c:type:`media_entity` function and name fields, but the
-revision field must be initialized if needed.
-
-A reference to the entity will be automatically acquired/released when the
-subdev device node (if any) is opened/closed.
-
-Don't forget to cleanup the media entity before the sub-device is destroyed:
-
-.. code-block:: c
-
-	media_entity_cleanup(&sd->entity);
-
-If the subdev driver intends to process video and integrate with the media
-framework, it must implement format related functionality using
-:c:type:`v4l2_subdev_pad_ops` instead of :c:type:`v4l2_subdev_video_ops`.
-
-In that case, the subdev driver may set the link_validate field to provide
-its own link validation function. The link validation function is called for
-every link in the pipeline where both of the ends of the links are V4L2
-sub-devices. The driver is still responsible for validating the correctness
-of the format configuration between sub-devices and video nodes.
-
-If link_validate op is not set, the default function
-:c:func:`v4l2_subdev_link_validate_default` is used instead. This function
-ensures that width, height and the media bus pixel code are equal on both source
-and sink of the link. Subdev drivers are also free to use this function to
-perform the checks mentioned above in addition to their own checks.
-
-There are currently two ways to register subdevices with the V4L2 core. The
-first (traditional) possibility is to have subdevices registered by bridge
-drivers. This can be done when the bridge driver has the complete information
-about subdevices connected to it and knows exactly when to register them. This
-is typically the case for internal subdevices, like video data processing units
-within SoCs or complex PCI(e) boards, camera sensors in USB cameras or connected
-to SoCs, which pass information about them to bridge drivers, usually in their
-platform data.
-
-There are however also situations where subdevices have to be registered
-asynchronously to bridge devices. An example of such a configuration is a Device
-Tree based system where information about subdevices is made available to the
-system independently from the bridge devices, e.g. when subdevices are defined
-in DT as I2C device nodes. The API used in this second case is described further
-below.
-
-Using one or the other registration method only affects the probing process, the
-run-time bridge-subdevice interaction is in both cases the same.
-
-In the synchronous case a device (bridge) driver needs to register the
-:c:type:`v4l2_subdev` with the v4l2_device:
-
-	:c:func:`v4l2_device_register_subdev <v4l2_device_register_subdev>`
-	(:c:type:`v4l2_dev <v4l2_device>`, :c:type:`sd <v4l2_subdev>`).
-
-This can fail if the subdev module disappeared before it could be registered.
-After this function was called successfully the subdev->dev field points to
-the :c:type:`v4l2_device`.
-
-If the v4l2_device parent device has a non-NULL mdev field, the sub-device
-entity will be automatically registered with the media device.
-
-You can unregister a sub-device using:
-
-	:c:func:`v4l2_device_unregister_subdev <v4l2_device_unregister_subdev>`
-	(:c:type:`sd <v4l2_subdev>`).
-
-
-Afterwards the subdev module can be unloaded and
-:c:type:`sd <v4l2_subdev>`->dev == ``NULL``.
-
-You can call an ops function either directly:
-
-.. code-block:: c
-
-	err = sd->ops->core->g_std(sd, &norm);
-
-but it is better and easier to use this macro:
-
-.. code-block:: c
-
-	err = v4l2_subdev_call(sd, core, g_std, &norm);
-
-The macro will to the right ``NULL`` pointer checks and returns ``-ENODEV``
-if :c:type:`sd <v4l2_subdev>` is ``NULL``, ``-ENOIOCTLCMD`` if either
-:c:type:`sd <v4l2_subdev>`->core or :c:type:`sd <v4l2_subdev>`->core->g_std is ``NULL``, or the actual result of the
-:c:type:`sd <v4l2_subdev>`->ops->core->g_std ops.
-
-It is also possible to call all or a subset of the sub-devices:
-
-.. code-block:: c
-
-	v4l2_device_call_all(v4l2_dev, 0, core, g_std, &norm);
-
-Any subdev that does not support this ops is skipped and error results are
-ignored. If you want to check for errors use this:
-
-.. code-block:: c
-
-	err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_std, &norm);
-
-Any error except ``-ENOIOCTLCMD`` will exit the loop with that error. If no
-errors (except ``-ENOIOCTLCMD``) occurred, then 0 is returned.
-
-The second argument to both calls is a group ID. If 0, then all subdevs are
-called. If non-zero, then only those whose group ID match that value will
-be called. Before a bridge driver registers a subdev it can set
-:c:type:`sd <v4l2_subdev>`->grp_id to whatever value it wants (it's 0 by
-default). This value is owned by the bridge driver and the sub-device driver
-will never modify or use it.
-
-The group ID gives the bridge driver more control how callbacks are called.
-For example, there may be multiple audio chips on a board, each capable of
-changing the volume. But usually only one will actually be used when the
-user want to change the volume. You can set the group ID for that subdev to
-e.g. AUDIO_CONTROLLER and specify that as the group ID value when calling
-``v4l2_device_call_all()``. That ensures that it will only go to the subdev
-that needs it.
-
-If the sub-device needs to notify its v4l2_device parent of an event, then
-it can call ``v4l2_subdev_notify(sd, notification, arg)``. This macro checks
-whether there is a ``notify()`` callback defined and returns ``-ENODEV`` if not.
-Otherwise the result of the ``notify()`` call is returned.
-
-The advantage of using :c:type:`v4l2_subdev` is that it is a generic struct and
-does not contain any knowledge about the underlying hardware. So a driver might
-contain several subdevs that use an I2C bus, but also a subdev that is
-controlled through GPIO pins. This distinction is only relevant when setting
-up the device, but once the subdev is registered it is completely transparent.
-
-In the asynchronous case subdevice probing can be invoked independently of the
-bridge driver availability. The subdevice driver then has to verify whether all
-the requirements for a successful probing are satisfied. This can include a
-check for a master clock availability. If any of the conditions aren't satisfied
-the driver might decide to return ``-EPROBE_DEFER`` to request further reprobing
-attempts. Once all conditions are met the subdevice shall be registered using
-the :c:func:`v4l2_async_register_subdev` function. Unregistration is
-performed using the :c:func:`v4l2_async_unregister_subdev` call. Subdevices
-registered this way are stored in a global list of subdevices, ready to be
-picked up by bridge drivers.
-
-Bridge drivers in turn have to register a notifier object. This is
-performed using the :c:func:`v4l2_async_notifier_register` call. To
-unregister the notifier the driver has to call
-:c:func:`v4l2_async_notifier_unregister`. The former of the two functions
-takes two arguments: a pointer to struct :c:type:`v4l2_device` and a
-pointer to struct :c:type:`v4l2_async_notifier`.
-
-Before registering the notifier, bridge drivers must do two things:
-first, the notifier must be initialized using the
-:c:func:`v4l2_async_notifier_init`. Second, bridge drivers can then
-begin to form a list of subdevice descriptors that the bridge device
-needs for its operation. Subdevice descriptors are added to the notifier
-using the :c:func:`v4l2_async_notifier_add_subdev` call. This function
-takes two arguments: a pointer to struct :c:type:`v4l2_async_notifier`,
-and a pointer to the subdevice descripter, which is of type struct
-:c:type:`v4l2_async_subdev`.
-
-The V4L2 core will then use these descriptors to match asynchronously
-registered subdevices to them. If a match is detected the ``.bound()``
-notifier callback is called. After all subdevices have been located the
-.complete() callback is called. When a subdevice is removed from the
-system the .unbind() method is called. All three callbacks are optional.
-
-V4L2 sub-device userspace API
------------------------------
-
-Beside exposing a kernel API through the :c:type:`v4l2_subdev_ops` structure,
-V4L2 sub-devices can also be controlled directly by userspace applications.
-
-Device nodes named ``v4l-subdev``\ *X* can be created in ``/dev`` to access
-sub-devices directly. If a sub-device supports direct userspace configuration
-it must set the ``V4L2_SUBDEV_FL_HAS_DEVNODE`` flag before being registered.
-
-After registering sub-devices, the :c:type:`v4l2_device` driver can create
-device nodes for all registered sub-devices marked with
-``V4L2_SUBDEV_FL_HAS_DEVNODE`` by calling
-:c:func:`v4l2_device_register_subdev_nodes`. Those device nodes will be
-automatically removed when sub-devices are unregistered.
-
-The device node handles a subset of the V4L2 API.
-
-``VIDIOC_QUERYCTRL``,
-``VIDIOC_QUERYMENU``,
-``VIDIOC_G_CTRL``,
-``VIDIOC_S_CTRL``,
-``VIDIOC_G_EXT_CTRLS``,
-``VIDIOC_S_EXT_CTRLS`` and
-``VIDIOC_TRY_EXT_CTRLS``:
-
-	The controls ioctls are identical to the ones defined in V4L2. They
-	behave identically, with the only exception that they deal only with
-	controls implemented in the sub-device. Depending on the driver, those
-	controls can be also be accessed through one (or several) V4L2 device
-	nodes.
-
-``VIDIOC_DQEVENT``,
-``VIDIOC_SUBSCRIBE_EVENT`` and
-``VIDIOC_UNSUBSCRIBE_EVENT``
-
-	The events ioctls are identical to the ones defined in V4L2. They
-	behave identically, with the only exception that they deal only with
-	events generated by the sub-device. Depending on the driver, those
-	events can also be reported by one (or several) V4L2 device nodes.
-
-	Sub-device drivers that want to use events need to set the
-	``V4L2_SUBDEV_USES_EVENTS`` :c:type:`v4l2_subdev`.flags and initialize
-	:c:type:`v4l2_subdev`.nevents to events queue depth before registering
-	the sub-device. After registration events can be queued as usual on the
-	:c:type:`v4l2_subdev`.devnode device node.
-
-	To properly support events, the ``poll()`` file operation is also
-	implemented.
-
-Private ioctls
-
-	All ioctls not in the above list are passed directly to the sub-device
-	driver through the core::ioctl operation.
-
-
-I2C sub-device drivers
-----------------------
-
-Since these drivers are so common, special helper functions are available to
-ease the use of these drivers (``v4l2-common.h``).
-
-The recommended method of adding :c:type:`v4l2_subdev` support to an I2C driver
-is to embed the :c:type:`v4l2_subdev` struct into the state struct that is
-created for each I2C device instance. Very simple devices have no state
-struct and in that case you can just create a :c:type:`v4l2_subdev` directly.
-
-A typical state struct would look like this (where 'chipname' is replaced by
-the name of the chip):
-
-.. code-block:: c
-
-	struct chipname_state {
-		struct v4l2_subdev sd;
-		...  /* additional state fields */
-	};
-
-Initialize the :c:type:`v4l2_subdev` struct as follows:
-
-.. code-block:: c
-
-	v4l2_i2c_subdev_init(&state->sd, client, subdev_ops);
-
-This function will fill in all the fields of :c:type:`v4l2_subdev` ensure that
-the :c:type:`v4l2_subdev` and i2c_client both point to one another.
-
-You should also add a helper inline function to go from a :c:type:`v4l2_subdev`
-pointer to a chipname_state struct:
-
-.. code-block:: c
-
-	static inline struct chipname_state *to_state(struct v4l2_subdev *sd)
-	{
-		return container_of(sd, struct chipname_state, sd);
-	}
-
-Use this to go from the :c:type:`v4l2_subdev` struct to the ``i2c_client``
-struct:
-
-.. code-block:: c
-
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-And this to go from an ``i2c_client`` to a :c:type:`v4l2_subdev` struct:
-
-.. code-block:: c
-
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-Make sure to call
-:c:func:`v4l2_device_unregister_subdev`\ (:c:type:`sd <v4l2_subdev>`)
-when the ``remove()`` callback is called. This will unregister the sub-device
-from the bridge driver. It is safe to call this even if the sub-device was
-never registered.
-
-You need to do this because when the bridge driver destroys the i2c adapter
-the ``remove()`` callbacks are called of the i2c devices on that adapter.
-After that the corresponding v4l2_subdev structures are invalid, so they
-have to be unregistered first. Calling
-:c:func:`v4l2_device_unregister_subdev`\ (:c:type:`sd <v4l2_subdev>`)
-from the ``remove()`` callback ensures that this is always done correctly.
-
-
-The bridge driver also has some helper functions it can use:
-
-.. code-block:: c
-
-	struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter,
-					"module_foo", "chipid", 0x36, NULL);
-
-This loads the given module (can be ``NULL`` if no module needs to be loaded)
-and calls :c:func:`i2c_new_device` with the given ``i2c_adapter`` and
-chip/address arguments. If all goes well, then it registers the subdev with
-the v4l2_device.
-
-You can also use the last argument of :c:func:`v4l2_i2c_new_subdev` to pass
-an array of possible I2C addresses that it should probe. These probe addresses
-are only used if the previous argument is 0. A non-zero argument means that you
-know the exact i2c address so in that case no probing will take place.
-
-Both functions return ``NULL`` if something went wrong.
-
-Note that the chipid you pass to :c:func:`v4l2_i2c_new_subdev` is usually
-the same as the module name. It allows you to specify a chip variant, e.g.
-"saa7114" or "saa7115". In general though the i2c driver autodetects this.
-The use of chipid is something that needs to be looked at more closely at a
-later date. It differs between i2c drivers and as such can be confusing.
-To see which chip variants are supported you can look in the i2c driver code
-for the i2c_device_id table. This lists all the possibilities.
-
-There are one more helper function:
-
-:c:func:`v4l2_i2c_new_subdev_board` uses an :c:type:`i2c_board_info` struct
-which is passed to the i2c driver and replaces the irq, platform_data and addr
-arguments.
-
-If the subdev supports the s_config core ops, then that op is called with
-the irq and platform_data arguments after the subdev was setup.
-
-The :c:func:`v4l2_i2c_new_subdev` function will call
-:c:func:`v4l2_i2c_new_subdev_board`, internally filling a
-:c:type:`i2c_board_info` structure using the ``client_type`` and the
-``addr`` to fill it.
-
-V4L2 sub-device functions and data structures
----------------------------------------------
-
-.. kernel-doc:: include/media/v4l2-subdev.h
-
-.. kernel-doc:: include/media/v4l2-async.h
diff --git a/Documentation/media/kapi/v4l2-tuner.rst b/Documentation/media/kapi/v4l2-tuner.rst
deleted file mode 100644
index e6caa3321566..000000000000
--- a/Documentation/media/kapi/v4l2-tuner.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Tuner functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/tuner.h
-
-.. kernel-doc:: include/media/tuner-types.h
diff --git a/Documentation/media/kapi/v4l2-tveeprom.rst b/Documentation/media/kapi/v4l2-tveeprom.rst
deleted file mode 100644
index 43fb391edaba..000000000000
--- a/Documentation/media/kapi/v4l2-tveeprom.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Hauppauge TV EEPROM functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/tveeprom.h
diff --git a/Documentation/media/kapi/v4l2-videobuf.rst b/Documentation/media/kapi/v4l2-videobuf.rst
deleted file mode 100644
index 1a7756397b1a..000000000000
--- a/Documentation/media/kapi/v4l2-videobuf.rst
+++ /dev/null
@@ -1,406 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. _vb_framework:
-
-Videobuf Framework
-==================
-
-Author: Jonathan Corbet <corbet@lwn.net>
-
-Current as of 2.6.33
-
-.. note::
-
-   The videobuf framework was deprecated in favor of videobuf2. Shouldn't
-   be used on new drivers.
-
-Introduction
-------------
-
-The videobuf layer functions as a sort of glue layer between a V4L2 driver
-and user space.  It handles the allocation and management of buffers for
-the storage of video frames.  There is a set of functions which can be used
-to implement many of the standard POSIX I/O system calls, including read(),
-poll(), and, happily, mmap().  Another set of functions can be used to
-implement the bulk of the V4L2 ioctl() calls related to streaming I/O,
-including buffer allocation, queueing and dequeueing, and streaming
-control.  Using videobuf imposes a few design decisions on the driver
-author, but the payback comes in the form of reduced code in the driver and
-a consistent implementation of the V4L2 user-space API.
-
-Buffer types
-------------
-
-Not all video devices use the same kind of buffers.  In fact, there are (at
-least) three common variations:
-
- - Buffers which are scattered in both the physical and (kernel) virtual
-   address spaces.  (Almost) all user-space buffers are like this, but it
-   makes great sense to allocate kernel-space buffers this way as well when
-   it is possible.  Unfortunately, it is not always possible; working with
-   this kind of buffer normally requires hardware which can do
-   scatter/gather DMA operations.
-
- - Buffers which are physically scattered, but which are virtually
-   contiguous; buffers allocated with vmalloc(), in other words.  These
-   buffers are just as hard to use for DMA operations, but they can be
-   useful in situations where DMA is not available but virtually-contiguous
-   buffers are convenient.
-
- - Buffers which are physically contiguous.  Allocation of this kind of
-   buffer can be unreliable on fragmented systems, but simpler DMA
-   controllers cannot deal with anything else.
-
-Videobuf can work with all three types of buffers, but the driver author
-must pick one at the outset and design the driver around that decision.
-
-[It's worth noting that there's a fourth kind of buffer: "overlay" buffers
-which are located within the system's video memory.  The overlay
-functionality is considered to be deprecated for most use, but it still
-shows up occasionally in system-on-chip drivers where the performance
-benefits merit the use of this technique.  Overlay buffers can be handled
-as a form of scattered buffer, but there are very few implementations in
-the kernel and a description of this technique is currently beyond the
-scope of this document.]
-
-Data structures, callbacks, and initialization
-----------------------------------------------
-
-Depending on which type of buffers are being used, the driver should
-include one of the following files:
-
-.. code-block:: none
-
-    <media/videobuf-dma-sg.h>		/* Physically scattered */
-    <media/videobuf-vmalloc.h>		/* vmalloc() buffers	*/
-    <media/videobuf-dma-contig.h>	/* Physically contiguous */
-
-The driver's data structure describing a V4L2 device should include a
-struct videobuf_queue instance for the management of the buffer queue,
-along with a list_head for the queue of available buffers.  There will also
-need to be an interrupt-safe spinlock which is used to protect (at least)
-the queue.
-
-The next step is to write four simple callbacks to help videobuf deal with
-the management of buffers:
-
-.. code-block:: none
-
-    struct videobuf_queue_ops {
-	int (*buf_setup)(struct videobuf_queue *q,
-			 unsigned int *count, unsigned int *size);
-	int (*buf_prepare)(struct videobuf_queue *q,
-			   struct videobuf_buffer *vb,
-			   enum v4l2_field field);
-	void (*buf_queue)(struct videobuf_queue *q,
-			  struct videobuf_buffer *vb);
-	void (*buf_release)(struct videobuf_queue *q,
-			    struct videobuf_buffer *vb);
-    };
-
-buf_setup() is called early in the I/O process, when streaming is being
-initiated; its purpose is to tell videobuf about the I/O stream.  The count
-parameter will be a suggested number of buffers to use; the driver should
-check it for rationality and adjust it if need be.  As a practical rule, a
-minimum of two buffers are needed for proper streaming, and there is
-usually a maximum (which cannot exceed 32) which makes sense for each
-device.  The size parameter should be set to the expected (maximum) size
-for each frame of data.
-
-Each buffer (in the form of a struct videobuf_buffer pointer) will be
-passed to buf_prepare(), which should set the buffer's size, width, height,
-and field fields properly.  If the buffer's state field is
-VIDEOBUF_NEEDS_INIT, the driver should pass it to:
-
-.. code-block:: none
-
-    int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
-			struct v4l2_framebuffer *fbuf);
-
-Among other things, this call will usually allocate memory for the buffer.
-Finally, the buf_prepare() function should set the buffer's state to
-VIDEOBUF_PREPARED.
-
-When a buffer is queued for I/O, it is passed to buf_queue(), which should
-put it onto the driver's list of available buffers and set its state to
-VIDEOBUF_QUEUED.  Note that this function is called with the queue spinlock
-held; if it tries to acquire it as well things will come to a screeching
-halt.  Yes, this is the voice of experience.  Note also that videobuf may
-wait on the first buffer in the queue; placing other buffers in front of it
-could again gum up the works.  So use list_add_tail() to enqueue buffers.
-
-Finally, buf_release() is called when a buffer is no longer intended to be
-used.  The driver should ensure that there is no I/O active on the buffer,
-then pass it to the appropriate free routine(s):
-
-.. code-block:: none
-
-    /* Scatter/gather drivers */
-    int videobuf_dma_unmap(struct videobuf_queue *q,
-			   struct videobuf_dmabuf *dma);
-    int videobuf_dma_free(struct videobuf_dmabuf *dma);
-
-    /* vmalloc drivers */
-    void videobuf_vmalloc_free (struct videobuf_buffer *buf);
-
-    /* Contiguous drivers */
-    void videobuf_dma_contig_free(struct videobuf_queue *q,
-				  struct videobuf_buffer *buf);
-
-One way to ensure that a buffer is no longer under I/O is to pass it to:
-
-.. code-block:: none
-
-    int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
-
-Here, vb is the buffer, non_blocking indicates whether non-blocking I/O
-should be used (it should be zero in the buf_release() case), and intr
-controls whether an interruptible wait is used.
-
-File operations
----------------
-
-At this point, much of the work is done; much of the rest is slipping
-videobuf calls into the implementation of the other driver callbacks.  The
-first step is in the open() function, which must initialize the
-videobuf queue.  The function to use depends on the type of buffer used:
-
-.. code-block:: none
-
-    void videobuf_queue_sg_init(struct videobuf_queue *q,
-				struct videobuf_queue_ops *ops,
-				struct device *dev,
-				spinlock_t *irqlock,
-				enum v4l2_buf_type type,
-				enum v4l2_field field,
-				unsigned int msize,
-				void *priv);
-
-    void videobuf_queue_vmalloc_init(struct videobuf_queue *q,
-				struct videobuf_queue_ops *ops,
-				struct device *dev,
-				spinlock_t *irqlock,
-				enum v4l2_buf_type type,
-				enum v4l2_field field,
-				unsigned int msize,
-				void *priv);
-
-    void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
-				       struct videobuf_queue_ops *ops,
-				       struct device *dev,
-				       spinlock_t *irqlock,
-				       enum v4l2_buf_type type,
-				       enum v4l2_field field,
-				       unsigned int msize,
-				       void *priv);
-
-In each case, the parameters are the same: q is the queue structure for the
-device, ops is the set of callbacks as described above, dev is the device
-structure for this video device, irqlock is an interrupt-safe spinlock to
-protect access to the data structures, type is the buffer type used by the
-device (cameras will use V4L2_BUF_TYPE_VIDEO_CAPTURE, for example), field
-describes which field is being captured (often V4L2_FIELD_NONE for
-progressive devices), msize is the size of any containing structure used
-around struct videobuf_buffer, and priv is a private data pointer which
-shows up in the priv_data field of struct videobuf_queue.  Note that these
-are void functions which, evidently, are immune to failure.
-
-V4L2 capture drivers can be written to support either of two APIs: the
-read() system call and the rather more complicated streaming mechanism.  As
-a general rule, it is necessary to support both to ensure that all
-applications have a chance of working with the device.  Videobuf makes it
-easy to do that with the same code.  To implement read(), the driver need
-only make a call to one of:
-
-.. code-block:: none
-
-    ssize_t videobuf_read_one(struct videobuf_queue *q,
-			      char __user *data, size_t count,
-			      loff_t *ppos, int nonblocking);
-
-    ssize_t videobuf_read_stream(struct videobuf_queue *q,
-				 char __user *data, size_t count,
-				 loff_t *ppos, int vbihack, int nonblocking);
-
-Either one of these functions will read frame data into data, returning the
-amount actually read; the difference is that videobuf_read_one() will only
-read a single frame, while videobuf_read_stream() will read multiple frames
-if they are needed to satisfy the count requested by the application.  A
-typical driver read() implementation will start the capture engine, call
-one of the above functions, then stop the engine before returning (though a
-smarter implementation might leave the engine running for a little while in
-anticipation of another read() call happening in the near future).
-
-The poll() function can usually be implemented with a direct call to:
-
-.. code-block:: none
-
-    unsigned int videobuf_poll_stream(struct file *file,
-				      struct videobuf_queue *q,
-				      poll_table *wait);
-
-Note that the actual wait queue eventually used will be the one associated
-with the first available buffer.
-
-When streaming I/O is done to kernel-space buffers, the driver must support
-the mmap() system call to enable user space to access the data.  In many
-V4L2 drivers, the often-complex mmap() implementation simplifies to a
-single call to:
-
-.. code-block:: none
-
-    int videobuf_mmap_mapper(struct videobuf_queue *q,
-			     struct vm_area_struct *vma);
-
-Everything else is handled by the videobuf code.
-
-The release() function requires two separate videobuf calls:
-
-.. code-block:: none
-
-    void videobuf_stop(struct videobuf_queue *q);
-    int videobuf_mmap_free(struct videobuf_queue *q);
-
-The call to videobuf_stop() terminates any I/O in progress - though it is
-still up to the driver to stop the capture engine.  The call to
-videobuf_mmap_free() will ensure that all buffers have been unmapped; if
-so, they will all be passed to the buf_release() callback.  If buffers
-remain mapped, videobuf_mmap_free() returns an error code instead.  The
-purpose is clearly to cause the closing of the file descriptor to fail if
-buffers are still mapped, but every driver in the 2.6.32 kernel cheerfully
-ignores its return value.
-
-ioctl() operations
-------------------
-
-The V4L2 API includes a very long list of driver callbacks to respond to
-the many ioctl() commands made available to user space.  A number of these
-- those associated with streaming I/O - turn almost directly into videobuf
-calls.  The relevant helper functions are:
-
-.. code-block:: none
-
-    int videobuf_reqbufs(struct videobuf_queue *q,
-			 struct v4l2_requestbuffers *req);
-    int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
-    int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b);
-    int videobuf_dqbuf(struct videobuf_queue *q, struct v4l2_buffer *b,
-		       int nonblocking);
-    int videobuf_streamon(struct videobuf_queue *q);
-    int videobuf_streamoff(struct videobuf_queue *q);
-
-So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's
-vidioc_reqbufs() callback which, in turn, usually only needs to locate the
-proper struct videobuf_queue pointer and pass it to videobuf_reqbufs().
-These support functions can replace a great deal of buffer management
-boilerplate in a lot of V4L2 drivers.
-
-The vidioc_streamon() and vidioc_streamoff() functions will be a bit more
-complex, of course, since they will also need to deal with starting and
-stopping the capture engine.
-
-Buffer allocation
------------------
-
-Thus far, we have talked about buffers, but have not looked at how they are
-allocated.  The scatter/gather case is the most complex on this front.  For
-allocation, the driver can leave buffer allocation entirely up to the
-videobuf layer; in this case, buffers will be allocated as anonymous
-user-space pages and will be very scattered indeed.  If the application is
-using user-space buffers, no allocation is needed; the videobuf layer will
-take care of calling get_user_pages() and filling in the scatterlist array.
-
-If the driver needs to do its own memory allocation, it should be done in
-the vidioc_reqbufs() function, *after* calling videobuf_reqbufs().  The
-first step is a call to:
-
-.. code-block:: none
-
-    struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);
-
-The returned videobuf_dmabuf structure (defined in
-<media/videobuf-dma-sg.h>) includes a couple of relevant fields:
-
-.. code-block:: none
-
-    struct scatterlist  *sglist;
-    int                 sglen;
-
-The driver must allocate an appropriately-sized scatterlist array and
-populate it with pointers to the pieces of the allocated buffer; sglen
-should be set to the length of the array.
-
-Drivers using the vmalloc() method need not (and cannot) concern themselves
-with buffer allocation at all; videobuf will handle those details.  The
-same is normally true of contiguous-DMA drivers as well; videobuf will
-allocate the buffers (with dma_alloc_coherent()) when it sees fit.  That
-means that these drivers may be trying to do high-order allocations at any
-time, an operation which is not always guaranteed to work.  Some drivers
-play tricks by allocating DMA space at system boot time; videobuf does not
-currently play well with those drivers.
-
-As of 2.6.31, contiguous-DMA drivers can work with a user-supplied buffer,
-as long as that buffer is physically contiguous.  Normal user-space
-allocations will not meet that criterion, but buffers obtained from other
-kernel drivers, or those contained within huge pages, will work with these
-drivers.
-
-Filling the buffers
--------------------
-
-The final part of a videobuf implementation has no direct callback - it's
-the portion of the code which actually puts frame data into the buffers,
-usually in response to interrupts from the device.  For all types of
-drivers, this process works approximately as follows:
-
- - Obtain the next available buffer and make sure that somebody is actually
-   waiting for it.
-
- - Get a pointer to the memory and put video data there.
-
- - Mark the buffer as done and wake up the process waiting for it.
-
-Step (1) above is done by looking at the driver-managed list_head structure
-- the one which is filled in the buf_queue() callback.  Because starting
-the engine and enqueueing buffers are done in separate steps, it's possible
-for the engine to be running without any buffers available - in the
-vmalloc() case especially.  So the driver should be prepared for the list
-to be empty.  It is equally possible that nobody is yet interested in the
-buffer; the driver should not remove it from the list or fill it until a
-process is waiting on it.  That test can be done by examining the buffer's
-done field (a wait_queue_head_t structure) with waitqueue_active().
-
-A buffer's state should be set to VIDEOBUF_ACTIVE before being mapped for
-DMA; that ensures that the videobuf layer will not try to do anything with
-it while the device is transferring data.
-
-For scatter/gather drivers, the needed memory pointers will be found in the
-scatterlist structure described above.  Drivers using the vmalloc() method
-can get a memory pointer with:
-
-.. code-block:: none
-
-    void *videobuf_to_vmalloc(struct videobuf_buffer *buf);
-
-For contiguous DMA drivers, the function to use is:
-
-.. code-block:: none
-
-    dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);
-
-The contiguous DMA API goes out of its way to hide the kernel-space address
-of the DMA buffer from drivers.
-
-The final step is to set the size field of the relevant videobuf_buffer
-structure to the actual size of the captured image, set state to
-VIDEOBUF_DONE, then call wake_up() on the done queue.  At this point, the
-buffer is owned by the videobuf layer and the driver should not touch it
-again.
-
-Developers who are interested in more information can go into the relevant
-header files; there are a few low-level functions declared there which have
-not been talked about here.  Also worthwhile is the vivi driver
-(drivers/media/platform/vivi.c), which is maintained as an example of how V4L2
-drivers should be written.  Vivi only uses the vmalloc() API, but it's good
-enough to get started with.  Note also that all of these calls are exported
-GPL-only, so they will not be available to non-GPL kernel modules.
diff --git a/Documentation/media/kapi/v4l2-videobuf2.rst b/Documentation/media/kapi/v4l2-videobuf2.rst
deleted file mode 100644
index 1044f64ff168..000000000000
--- a/Documentation/media/kapi/v4l2-videobuf2.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. _vb2_framework:
-
-V4L2 videobuf2 functions and data structures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. kernel-doc:: include/media/videobuf2-core.h
-
-.. kernel-doc:: include/media/videobuf2-v4l2.h
-
-.. kernel-doc:: include/media/videobuf2-memops.h
diff --git a/Documentation/media/lirc.h.rst.exceptions b/Documentation/media/lirc.h.rst.exceptions
deleted file mode 100644
index ac768d769113..000000000000
--- a/Documentation/media/lirc.h.rst.exceptions
+++ /dev/null
@@ -1,80 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define _LINUX_LIRC_H
-
-# Ignore helper macros
-
-ignore define lirc_t
-
-ignore define LIRC_SPACE
-ignore define LIRC_PULSE
-ignore define LIRC_FREQUENCY
-ignore define LIRC_TIMEOUT
-ignore define LIRC_VALUE
-ignore define LIRC_MODE2
-ignore define LIRC_IS_SPACE
-ignore define LIRC_IS_PULSE
-ignore define LIRC_IS_FREQUENCY
-ignore define LIRC_IS_TIMEOUT
-
-ignore define LIRC_MODE2SEND
-ignore define LIRC_SEND2MODE
-ignore define LIRC_MODE2REC
-ignore define LIRC_REC2MODE
-
-ignore define LIRC_CAN_SEND
-ignore define LIRC_CAN_REC
-
-ignore define LIRC_CAN_SEND_MASK
-ignore define LIRC_CAN_REC_MASK
-ignore define LIRC_CAN_SET_REC_DUTY_CYCLE
-
-# Obsolete ioctls
-
-ignore ioctl LIRC_GET_LENGTH
-
-# rc protocols
-
-ignore symbol RC_PROTO_UNKNOWN
-ignore symbol RC_PROTO_OTHER
-ignore symbol RC_PROTO_RC5
-ignore symbol RC_PROTO_RC5X_20
-ignore symbol RC_PROTO_RC5_SZ
-ignore symbol RC_PROTO_JVC
-ignore symbol RC_PROTO_SONY12
-ignore symbol RC_PROTO_SONY15
-ignore symbol RC_PROTO_SONY20
-ignore symbol RC_PROTO_NEC
-ignore symbol RC_PROTO_NECX
-ignore symbol RC_PROTO_NEC32
-ignore symbol RC_PROTO_SANYO
-ignore symbol RC_PROTO_MCIR2_KBD
-ignore symbol RC_PROTO_MCIR2_MSE
-ignore symbol RC_PROTO_RC6_0
-ignore symbol RC_PROTO_RC6_6A_20
-ignore symbol RC_PROTO_RC6_6A_24
-ignore symbol RC_PROTO_RC6_6A_32
-ignore symbol RC_PROTO_RC6_MCE
-ignore symbol RC_PROTO_SHARP
-ignore symbol RC_PROTO_XMP
-ignore symbol RC_PROTO_CEC
-ignore symbol RC_PROTO_IMON
-ignore symbol RC_PROTO_RCMM12
-ignore symbol RC_PROTO_RCMM24
-ignore symbol RC_PROTO_RCMM32
-ignore symbol RC_PROTO_XBOX_DVD
-
-# Undocumented macros
-
-ignore define PULSE_BIT
-ignore define PULSE_MASK
-
-ignore define LIRC_MODE2_SPACE
-ignore define LIRC_MODE2_PULSE
-
-ignore define LIRC_VALUE_MASK
-ignore define LIRC_MODE2_MASK
-
-ignore define LIRC_MODE_RAW
-ignore define LIRC_MODE_LIRCCODE
diff --git a/Documentation/media/media.h.rst.exceptions b/Documentation/media/media.h.rst.exceptions
deleted file mode 100644
index 9b4c26502d95..000000000000
--- a/Documentation/media/media.h.rst.exceptions
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define __LINUX_MEDIA_H
-
-# Ignore macros
-ignore define MEDIA_API_VERSION
-ignore define MEDIA_ENT_F_BASE
-ignore define MEDIA_ENT_F_OLD_BASE
-ignore define MEDIA_ENT_F_OLD_SUBDEV_BASE
-ignore define MEDIA_ENT_F_DTV_DECODER
-ignore define MEDIA_INTF_T_DVB_BASE
-ignore define MEDIA_INTF_T_V4L_BASE
-ignore define MEDIA_INTF_T_ALSA_BASE
-#ignore legacy entity type macros
-ignore define MEDIA_ENT_TYPE_SHIFT
-ignore define MEDIA_ENT_TYPE_MASK
-ignore define MEDIA_ENT_SUBTYPE_MASK
-ignore define MEDIA_ENT_T_DEVNODE_UNKNOWN
-ignore define MEDIA_ENT_T_DEVNODE
-ignore define MEDIA_ENT_T_DEVNODE_V4L
-ignore define MEDIA_ENT_T_DEVNODE_FB
-ignore define MEDIA_ENT_T_DEVNODE_ALSA
-ignore define MEDIA_ENT_T_DEVNODE_DVB
-ignore define MEDIA_ENT_T_UNKNOWN
-ignore define MEDIA_ENT_T_V4L2_VIDEO
-ignore define MEDIA_ENT_T_V4L2_SUBDEV
-ignore define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR
-ignore define MEDIA_ENT_T_V4L2_SUBDEV_FLASH
-ignore define MEDIA_ENT_T_V4L2_SUBDEV_LENS
-ignore define MEDIA_ENT_T_V4L2_SUBDEV_DECODER
-ignore define MEDIA_ENT_T_V4L2_SUBDEV_TUNER
diff --git a/Documentation/media/media_kapi.rst b/Documentation/media/media_kapi.rst
deleted file mode 100644
index 1389998c90f7..000000000000
--- a/Documentation/media/media_kapi.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-===================================
-Media subsystem kernel internal API
-===================================
-
-**Copyright** |copy| 2009-2016 : LinuxTV Developers
-
-This documentation is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2 of the License, or (at your option) any
-later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-more details.
-
-For more details see the file COPYING in the source distribution of Linux.
-
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-    :maxdepth: 5
-    :numbered:
-
-    kapi/v4l2-core
-    kapi/dtv-core
-    kapi/rc-core
-    kapi/mc-core
-    kapi/cec-core
-    kapi/csi2
diff --git a/Documentation/media/media_uapi.rst b/Documentation/media/media_uapi.rst
deleted file mode 100644
index 0753005c7bb4..000000000000
--- a/Documentation/media/media_uapi.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-########################################
-Linux Media Infrastructure userspace API
-########################################
-
-**Copyright** |copy| 2009-2016 : LinuxTV Developers
-
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation, with no
-Invariant Sections. A copy of the license is included in the chapter
-entitled "GNU Free Documentation License".
-
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-    :maxdepth: 1
-
-    intro
-    uapi/v4l/v4l2
-    uapi/dvb/dvbapi
-    uapi/rc/remote_controllers
-    uapi/mediactl/media-controller
-    uapi/cec/cec-api
-    uapi/gen-errors
-    uapi/fdl-appendix
diff --git a/Documentation/media/net.h.rst.exceptions b/Documentation/media/net.h.rst.exceptions
deleted file mode 100644
index 5159aa4bbbb9..000000000000
--- a/Documentation/media/net.h.rst.exceptions
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define _DVBNET_H_
-
-# Ignore old ioctls/structs
-ignore ioctl __NET_ADD_IF_OLD
-ignore ioctl __NET_GET_IF_OLD
-ignore struct __dvb_net_if_old
-
-# Macros used at struct dvb_net_if
-replace define DVB_NET_FEEDTYPE_MPE :c:type:`dvb_net_if`
-replace define DVB_NET_FEEDTYPE_ULE :c:type:`dvb_net_if`
diff --git a/Documentation/media/typical_media_device.svg b/Documentation/media/typical_media_device.svg
deleted file mode 100644
index bfd5c7db3b00..000000000000
--- a/Documentation/media/typical_media_device.svg
+++ /dev/null
@@ -1,116 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg id="svg2" width="235mm" height="179mm" clip-path="url(#a)" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 22648.239 17899.829" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata1533"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4"><clipPath id="a"><rect id="rect7" width="28000" height="21000"/></clipPath></defs><path id="path11" d="m10146 2636c-518.06 0-1035.1 515-1035.1 1031v4124c0 516 517.06 1032 1035.1 1032h8572.2c518.06 0 1036.1-516 1036.1-1032v-4124c0-516-518.06-1031-1036.1-1031h-8572.2z"
-fill="#fcf" style=""/><path id="path15" d="m1505.5 13443c-293 0-585 292-585 585v2340c0 293 292 586 585 586h3275c293 0 586-293 586-586v-2340c0-293-293-585-586-585h-3275z" fill="#ffc" style=""/><path id="path19" d="m517.15 22.013c-461 0-922 461-922 922v11169c0 461 461 923 922 923h3692c461 0 922-462 922-923v-11169c0-461-461-922-922-922h-3692z" fill="#e6e6e6" style=""/><path id="path23" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="#ff8080" style=""/><path id="path25" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="none" stroke="#3465af" style=""/><text id="text27" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan29" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan31" class="TextPosition" x="489.5459" y="6111.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan33"
-fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio decoder</tspan></tspan></tspan></text>
-<path id="path37" d="m2371.5 9608h-2260v-1270h4520v1270h-2260z" fill="#ff8080" style=""/><path id="path39" d="m2371.5 9608h-2260v-1270h4520v1270h-2260z" fill="none" stroke="#3465af" style=""/><text id="text41" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan43" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan45" class="TextPosition" x="527.5459" y="9189.0127" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan47" fill="#000000" font-family="Serif, serif" font-size="493.88px">Video decoder</tspan></tspan></tspan></text>
-<path id="path51" d="m2363.5 8053h-2269v-1224h4537v1224h-2268z" fill="#ff8080" style=""/><path id="path53" d="m2363.5 8053h-2269v-1224h4537v1224h-2268z" fill="none" stroke="#3465af" style=""/><text id="text55" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan57" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan59" class="TextPosition" x="481.5459" y="7657.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan61" fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio encoder</tspan></tspan></tspan></text>
-<path id="path65" d="m13622 10386h-3810v-1281h7620v1281h-3810z" fill="#cfc" style=""/><path id="path67" d="m13622 10386h-3810v-1281h7620v1281h-3810z" fill="none" stroke="#3465af" style=""/><text id="text69" class="TextShape" x="-2089.4541" y="-2446.187" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan71" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan73" class="TextPosition" x="10287.546" y="9960.8135" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan75" fill="#000000" font-family="Serif, serif" font-size="493.88px">Button Key/IR input logic</tspan></tspan></tspan></text>
-<path id="path79" d="m12080 12182h-2268v-1412h4536v1412h-2268z" fill="#cfe7f5" style=""/><path id="path81" d="m12080 12182h-2268v-1412h4536v1412h-2268z" fill="none" stroke="#3465af" style=""/><text id="text83" class="TextShape" x="-2089.4541" y="-2389.7871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan85" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan87" class="TextPosition" x="10792.546" y="11692.213" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan89" fill="#000000" font-family="Serif, serif" font-size="493.88px">EEPROM</tspan></tspan></tspan></text>
-<path id="path93" d="m3050.5 15498h-1563v-1715h3126v1715h-1563z" fill="#fc9" style=""/><path id="path95" d="m3050.5 15498h-1563v-1715h3126v1715h-1563z" fill="none" stroke="#3465af" style=""/><text id="text97" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan99" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan101" class="TextPosition" x="2186.5459" y="14856.013" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan103" fill="#000000" font-family="Serif, serif" font-size="493.88px">Sensor</tspan></tspan></tspan></text>
-<path id="path107" d="m4629.5 5866 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="#729fcf" style=""/><path id="path109" d="m4629.5 5866 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path113" d="m4629.5 7448 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="#729fcf" style=""/><path id="path115" d="m4629.5 7448 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path119" d="m4631.5 8936 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path121" d="m4631.5 8936 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path125" d="m7872.5 11464 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z"
-fill="#729fcf" style=""/><path id="path127" d="m7872.5 11464 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path131" d="m7872.5 9716.8 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path133" d="m7872.5 9716.8 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path137" d="m7872.5 14994 670-353v176h2028v-176l671 353-671 354v-177h-2028v177l-670-354z" fill="#729fcf" style=""/><path id="path139" d="m7872.5 14994 670-353v176h2028v-176l671 353-671 354v-177h-2028v177l-670-354z" fill="none" stroke="#3465af" style=""/><path id="path143" d="m17534 14105 978.49 840.89-978.49 840.89v-420.86h-2960.5v420.86l-979.49-840.89 979.49-840.89v420.03h2960.5v-420.03z" fill="#729fcf" style=""/><path id="path145" d="m17534 14105 978.49
-840.89-978.49 840.89v-420.86h-2960.5v420.86l-979.49-840.89 979.49-840.89v420.03h2960.5v-420.03z" fill="none" stroke="#3465af" stroke-width="25.77" style=""/><text id="text149" class="TextShape" x="-9922.1533" y="-644.58704" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan151" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan153" class="TextPosition" transform="matrix(0,-1,1,0,8509,40173)" x="14418.847" y="15187.413" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan155" fill="#000000" font-family="Serif, serif" font-size="493.88px">System Bus</tspan></tspan></tspan></text>
-<path id="path159" d="m11062 7098h-1250v-875h2499v875h-1249z" fill="#cff" style=""/><path id="path161" d="m11062 7098h-1250v-875h2499v875h-1249z" fill="none" stroke="#3465af" style=""/><text id="text163" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan165" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan167" class="TextPosition" x="10125.546" y="6876.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan169" fill="#000000" font-family="Serif, serif" font-size="493.88px">Demux</tspan></tspan></tspan></text>
-<path id="path173" d="m7906.5 6601 373-357v178h1130v-178l374 357-374 358v-179h-1130v179l-373-358z" fill="#729fcf" style=""/><path id="path175" d="m7906.5 6601 373-357v178h1130v-178l374 357-374 358v-179h-1130v179l-373-358z" fill="none" stroke="#3465af" style=""/><path id="path179" d="m7906.5 5214 373-358v179h1130v-179l374 358-374 358v-179h-1130v179l-373-358z" fill="#729fcf" style=""/><path id="path181" d="m7906.5 5214 373-358v179h1130v-179l374 358-374 358v-179h-1130v179l-373-358z" fill="none" stroke="#3465af" style=""/><path id="path185" d="m14233 5828h-4421v-1270h8841v1270h-4420z" fill="#cff" style=""/><path id="path187" d="m14233 5828h-4421v-1270h8841v1270h-4420z" fill="none" stroke="#3465af" style=""/><text id="text189" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan191" class="TextParagraph" font-family="Serif, serif"
-font-size="493.88px"><tspan id="tspan193" class="TextPosition" x="10696.546" y="5409.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan195" fill="#000000" font-family="Serif, serif" font-size="493.88px">Conditional Access Module</tspan></tspan></tspan></text>
-<path id="path199" d="m2355.5 11123h-2269v-1224h4537v1224h-2268z" fill="#ff8080" style=""/><path id="path201" d="m2355.5 11123h-2269v-1224h4537v1224h-2268z" fill="none" stroke="#3465af" style=""/><text id="text203" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan205" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan207" class="TextPosition" x="511.5459" y="10727.013" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan209" fill="#000000" font-family="Serif, serif" font-size="493.88px">Video encoder</tspan></tspan></tspan></text>
-<path id="path213" d="m4631.5 10470 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path215" d="m4631.5 10470 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path219" d="m18702 5381 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path221" d="m18702 5381 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><text id="text225" class="TextShape" x="-1976.5541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan227" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan229" class="TextPosition" x="13.4459" y="12314.013" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan231" fill="#000000"
-font-family="Serif, serif" font-size="493.88px">Radio / Analog TV</tspan></tspan></tspan></text>
-<text id="text235" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan237" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan239" class="TextPosition" x="12866.546" y="8560.0127" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan241" fill="#000000" font-family="Serif, serif" font-size="493.88px">Digital TV</tspan></tspan></tspan></text>
-<text id="text245" class="TextShape" x="-8919.0537" y="-1373.787" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan247" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan249" class="TextPosition" x="5804.9458" y="17793.213" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan251" fill="#000000" font-family="Serif, serif" font-size="493.88px">PS.: picture is not complete: other blocks may be present</tspan></tspan></tspan></text>
-<text id="text255" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan257" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan259" class="TextPosition" x="2109.5459" y="16397.014" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan261" fill="#000000" font-family="Serif, serif" font-size="493.88px">Webcam</tspan></tspan></tspan></text>
-<path id="path265" d="m12463 13926h-2650v-1412h5299v1412h-2649z" fill="#f90" style=""/><path id="path267" d="m12463 13926h-2650v-1412h5299v1412h-2649z" fill="none" stroke="#3465af" style=""/><text id="text269" class="TextShape" x="-2089.4541" y="-2446.187" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan271" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan273" class="TextPosition" x="10175.546" y="13435.813" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan275" fill="#000000" font-family="Serif, serif" font-size="493.88px">Processing blocks</tspan></tspan></tspan></text>
-<path id="path279" d="m7872.5 13208 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path281" d="m7872.5 13208 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path285" d="m4612.5 14790 397-353v176h1201v-176l398 353-398 354v-177h-1201v177l-397-354z" fill="#729fcf" style=""/><path id="path287" d="m4612.5 14790 397-353v176h1201v-176l398 353-398 354v-177h-1201v177l-397-354z" fill="none" stroke="#3465af" style=""/><text id="text291" class="TextShape" x="-2428.0542" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan293" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan295" class="TextPosition" x="20421.945" y="6628.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan297" fill="#000000"
-font-family="Serif, serif" font-size="493.88px">Smartcard</tspan></tspan></tspan></text>
-<path id="path301" d="m623.32 436.01c-334.6 0-669.2 333-669.2 666v2668c0 333 334.6 666 669.2 666h18456c334.6 0 670.2-333 670.2-666v-2668c0-333-335.6-666-670.2-666h-18456z" fill="#fcf" style=""/><path id="path305" d="m3031.5 2991h-1614v-1816h3227v1816h-1613z" fill="#ff8080" style=""/><path id="path307" d="m3031.5 2991h-1614v-1816h3227v1816h-1613z" fill="none" stroke="#3465af" style=""/><text id="text309" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan311" class="TextParagraph"><tspan id="tspan313" class="TextPosition" x="2284.5459" y="1947.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan315" fill="#000000" font-family="Serif, serif" font-size="493.88px">Tuner</tspan></tspan></tspan><tspan id="tspan317" class="TextParagraph"><tspan id="tspan319" class="TextPosition" x="2061.5459" y="2650.0129"
-font-family="Serif, serif" font-size="493.88px"><tspan id="tspan321" fill="#000000" font-family="Serif, serif" font-size="493.88px">FM/TV</tspan></tspan></tspan></text>
-<path id="path325" d="m812.55 1538c0 111 40 202 88 202h530c48 0 89-91 89-202 0-110-41-202-89-202h-530c-48 0-88 92-88 202z" fill="#ff8080" style=""/><path id="path327" d="m812.55 1538c0 111 40 202 88 202h530c48 0 89-91 89-202 0-110-41-202-89-202h-530c-48 0-88 92-88 202z" fill="none" stroke="#3465af" style=""/><path id="path329" d="m812.55 1538c0 111 40 202 88 202s88-91 88-202c0-110-40-202-88-202s-88 92-88 202z" fill="#ffb3b3" style=""/><path id="path331" d="m812.55 1538c0 111 40 202 88 202s88-91 88-202c0-110-40-202-88-202s-88 92-88 202z" fill="none" stroke="#3465af" style=""/><path id="path335" d="m813.55 2103c0 110 40 202 88 202h530c48 0 89-92 89-202s-41-203-89-203h-530c-48 0-88 93-88 203z" fill="#ff8080" style=""/><path id="path337" d="m813.55 2103c0 110 40 202 88 202h530c48 0 89-92 89-202s-41-203-89-203h-530c-48 0-88 93-88 203z" fill="none" stroke="#3465af" style=""/><path
-id="path339" d="m813.55 2103c0 110 40 202 88 202s88-92 88-202-40-203-88-203-88 93-88 203z" fill="#ffb3b3" style=""/><path id="path341" d="m813.55 2103c0 110 40 202 88 202s88-92 88-202-40-203-88-203-88 93-88 203z" fill="none" stroke="#3465af" style=""/><path id="path345" d="m4629.5 2032 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="#729fcf" style=""/><path id="path347" d="m4629.5 2032 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path351" d="m7889.5 1986 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="#729fcf" style=""/><path id="path353" d="m7889.5 1986 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="none" stroke="#3465af" style=""/><path id="path357" d="m14411 4025h-4500v-1389h9e3v1389h-4500z" fill="#cff" style=""/><path id="path359" d="m14411
-4025h-4500v-1389h9e3v1389h-4500z" fill="none" stroke="#3465af" style=""/><text id="text361" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan363" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan365" class="TextPosition" x="9961.5459" y="3546.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan367" fill="#000000" font-family="Serif, serif" font-size="493.88px">Satellite Equipment Control (SEC)</tspan></tspan></tspan></text>
-<path id="path371" d="m11311 2436h-1400v-1e3h2800v1e3h-1400z" fill="#cff" style=""/><path id="path373" d="m11311 2436h-1400v-1e3h2800v1e3h-1400z" fill="none" stroke="#3465af" style=""/><text id="text375" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan377" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan379" class="TextPosition" x="10375.546" y="2152.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan381" fill="#000000" font-family="Serif, serif" font-size="493.88px">Demod</tspan></tspan></tspan></text>
-<path id="path385" d="m7889.5 3287 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="#729fcf" style=""/><path id="path387" d="m7889.5 3287 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="none" stroke="#3465af" style=""/><path id="path389" d="m7906.5 9121v7302h-1270v-14605h1270v7303z" fill="#ff9" style=""/><path id="path391" d="m7906.5 9121v7302h-1270v-14605h1270v7303z" fill="none" stroke="#3465af" style=""/><text id="text393" class="TextShape" transform="rotate(-90)" x="-20792.584" y="-6589.021" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan395" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan397" class="TextPosition" transform="matrix(0,-1,1,0,-4473,23627)" x="-11215.646" y="7460.9849" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan399" fill="#000000" font-family="Serif,
-serif" font-size="493.88px">I2C Bus (control bus)</tspan></tspan></tspan></text>
-<text id="text403" class="TextShape" x="-2145.854" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan405" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan407" class="TextPosition" x="7245.146" y="1114.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan409" fill="#000000" font-family="Serif, serif" font-size="493.88px">Digital TV Frontend</tspan></tspan></tspan></text>
-<path id="path415" d="m863.15 636.14c-18.27 0-35.525 0.99994-53.795 2.9998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path417" d="m776.87 644.14c-17.255 2.9998-35.525 6.9996-52.78 11.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path419" d="m692.63 666.14c-16.24 5.9996-33.495 11.999-49.735 19.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path421" d="m613.46 700.14c-15.225 7.9995-31.465 16.999-46.69 26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path423" d="m539.36 745.14c-14.21 9.9994-28.42 20.999-42.63 31.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path425" d="m471.36 798.14c-13.195 11.999-26.39 23.999-38.57 36.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path427" d="m410.46 859.13c-11.165 12.999-22.33
-26.998-33.495 40.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path429" d="m357.68 927.13c-10.15 13.999-19.285 28.998-28.42 44.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path431" d="m314.03 1000.1c-8.12 15.999-15.225 31.998-22.33 48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path433" d="m280.54 1079.1c-5.075 16.999-10.15 33.998-14.21 50.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path435" d="m260.24 1162.1c-3.045 17.999-5.075 34.998-6.09 52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path437" d="m254.15 1247.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path439" d="m254.15 1333.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path441" d="m254.15 1418.1v52.997"
-fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path443" d="m254.15 1504.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path445" d="m254.15 1589.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path447" d="m254.15 1675.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path449" d="m254.15 1760.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path451" d="m254.15 1845.1v53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path453" d="m254.15 1931.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path455" d="m254.15 2016.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path457" d="m254.15 2102.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432"
-style=""/><path id="path459" d="m254.15 2187.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path461" d="m254.15 2273v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path463" d="m254.15 2358v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path465" d="m254.15 2443v53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path467" d="m254.15 2529v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path469" d="m254.15 2614v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path471" d="m254.15 2700v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path473" d="m254.15 2785v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path475" d="m254.15 2871v52.997" fill="none"
-stroke="#3465af" stroke-width="28.432" style=""/><path id="path477" d="m254.15 2956v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path479" d="m254.15 3041v53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path481" d="m254.15 3127v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path483" d="m254.15 3212v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path485" d="m254.15 3298v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path487" d="m254.15 3383v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path489" d="m254.15 3469v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path491" d="m254.15 3554v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path493"
-d="m254.15 3639c0 17.999 1.015 35.998 3.045 52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path495" d="m262.27 3724c4.06 17.999 8.12 34.998 13.195 51.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path497" d="m285.61 3807c6.09 15.999 13.195 32.998 20.3 48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path499" d="m321.14 3885c8.12 14.999 17.255 30.998 27.405 45.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path501" d="m366.81 3957.9c10.15 13.999 21.315 27.998 32.48 41.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path503" d="m420.61 4023.9c12.18 12.999 25.375 25.998 38.57 37.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path505" d="m483.54 4083.9c13.195 10.999 27.405 22.999 41.615 32.998" fill="none"
-stroke="#3465af" stroke-width="28.432" style=""/><path id="path507" d="m552.56 4135.9c14.21 9.9994 29.435 18.999 45.675 26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path509" d="m627.67 4178.9c15.225 6.9996 32.48 14.999 48.72 20.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path511" d="m707.85 4210.9c17.255 4.9997 34.51 9.9994 51.765 13.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path513" d="m792.1 4230.9c17.255 1.9999 35.525 3.9998 53.795 4.9997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path515" d="m878.37 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path517" d="m964.65 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path519" d="m1051.9 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path521" d="m1138.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path523" d="m1225.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path525" d="m1311.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path527" d="m1398.1 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path529" d="m1485.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path531" d="m1571.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path533" d="m1658.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path535" d="m1745.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path537"
-d="m1832.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path539" d="m1918.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path541" d="m2005 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path543" d="m2092.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path545" d="m2178.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path547" d="m2265.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path549" d="m2352.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path551" d="m2439.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path553" d="m2525.7 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path555" d="m2612 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path557" d="m2699.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path559" d="m2785.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path561" d="m2872.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path563" d="m2959.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path565" d="m3046.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path567" d="m3132.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path569" d="m3220 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path571"
-d="m3306.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path573" d="m3392.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path575" d="m3479.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path577" d="m3566.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path579" d="m3653.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path581" d="m3739.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path583" d="m3826.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path585" d="m3913.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path587" d="m3999.5 4235.9h53.795" fill="none"
-stroke="#3465af" stroke-width="28.432" style=""/><path id="path589" d="m4086.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path591" d="m4173.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path593" d="m4260.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path595" d="m4346.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path597" d="m4433.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path599" d="m4520.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path601" d="m4606.5 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path603" d="m4693.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432"
-style=""/><path id="path605" d="m4780 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path607" d="m4867.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path609" d="m4953.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path611" d="m5040.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path613" d="m5127.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path615" d="m5213.4 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path617" d="m5300.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path619" d="m5387 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path621" d="m5474.3 4235.9h53.795"
-fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path623" d="m5560.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path625" d="m5647.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path627" d="m5734.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path629" d="m5820.4 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path631" d="m5907.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path633" d="m5994 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path635" d="m6081.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path637" d="m6167.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432"
-style=""/><path id="path639" d="m6254.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path641" d="m6341.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path643" d="m6427.4 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path645" d="m6514.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path647" d="m6600.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path649" d="m6688.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path651" d="m6774.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path653" d="m6861.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path655" d="m6948.1
-4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path657" d="m7035.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path659" d="m7121.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path661" d="m7207.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path663" d="m7295.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path665" d="m7381.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path667" d="m7468.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path669" d="m7555 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path671" d="m7642.3 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path673" d="m7728.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path675" d="m7814.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path677" d="m7902.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path679" d="m7988.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path681" d="m8075.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path683" d="m8162 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path685" d="m8249.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path687" d="m8335.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path689"
-d="m8421.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path691" d="m8509.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path693" d="m8595.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path695" d="m8682.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path697" d="m8769 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path699" d="m8856.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path701" d="m8942.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path703" d="m9028.8 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path705" d="m9116.1 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path707" d="m9202.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path709" d="m9289.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path711" d="m9376 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path713" d="m9463.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path715" d="m9549.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path717" d="m9635.8 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path719" d="m9723.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path721" d="m9809.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path723"
-d="m9896.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path725" d="m9982.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path727" d="m10070 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path729" d="m10156 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path731" d="m10243 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path733" d="m10330 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path735" d="m10416 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path737" d="m10504 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path739" d="m10590 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path741" d="m10677 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path743" d="m10763 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path745" d="m10850 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path747" d="m10937 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path749" d="m11023 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path751" d="m11111 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path753" d="m11197 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path755" d="m11284 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path757" d="m11370
-4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path759" d="m11458 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path761" d="m11544 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path763" d="m11630 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path765" d="m11718 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path767" d="m11804 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path769" d="m11891 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path771" d="m11977 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path773" d="m12065 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path775" d="m12151 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path777" d="m12237 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path779" d="m12325 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path781" d="m12411 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path783" d="m12498 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path785" d="m12584 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path787" d="m12672 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path789" d="m12758 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path791"
-d="m12844 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path793" d="m12931 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path795" d="m13018 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path797" d="m13105 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path799" d="m13191 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path801" d="m13279 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path803" d="m13365 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path805" d="m13451 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path807" d="m13538 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path809" d="m13625 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path811" d="m13712 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path813" d="m13798 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path815" d="m13886 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path817" d="m13972 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path819" d="m14058 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path821" d="m14145 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path823" d="m14232 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path825" d="m14319
-4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path827" d="m14405 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path829" d="m14493 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path831" d="m14579 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path833" d="m14665 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path835" d="m14752 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path837" d="m14839 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path839" d="m14926 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path841" d="m15012 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path843" d="m15100 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path845" d="m15186 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path847" d="m15272 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path849" d="m15359 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path851" d="m15446 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path853" d="m15533 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path855" d="m15619 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path857" d="m15707 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path859" d="m15793
-4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path861" d="m15880 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path863" d="m15966 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path865" d="m16053 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path867" d="m16140 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path869" d="m16226 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path871" d="m16313 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path873" d="m16400 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path875" d="m16487 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path877" d="m16573 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path879" d="m16660 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path881" d="m16747 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path883" d="m16833 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path885" d="m16920 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path887" d="m17007 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path889" d="m17094 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path891" d="m17180 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path893"
-d="m17267 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path895" d="m17354 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path897" d="m17440 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path899" d="m17527 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path901" d="m17614 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path903" d="m17701 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path905" d="m17787 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path907" d="m17874 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path909" d="m17961 4235.9h53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path911" d="m18047 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path913" d="m18134 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path915" d="m18221 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path917" d="m18308 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path919" d="m18394 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path921" d="m18481 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path923" d="m18568 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path925" d="m18654 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path927" d="m18741
-4235.9c17.255-0.9999 35.525-1.9999 53.795-4.9997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path929" d="m18828 4225.9c17.255-3.9998 34.51-8.9995 51.765-13.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path931" d="m18911 4200.9c16.24-5.9996 32.48-12.999 48.72-20.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path933" d="m18989 4164.9c15.225-7.9996 31.465-16.999 45.675-26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path935" d="m19062 4118.9c14.21-9.9994 28.42-20.999 42.63-31.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path937" d="m19129 4064.9c13.195-11.999 25.375-24.998 37.555-37.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path939" d="m19189 4002.9c11.165-13.999 22.33-27.998 33.495-41.998" fill="none"
-stroke="#3465af" stroke-width="28.432" style=""/><path id="path941" d="m19241 3933.9c10.15-14.999 19.285-29.998 27.405-44.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path943" d="m19283 3860c7.105-15.999 14.21-32.998 20.3-48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path945" d="m19315 3780c5.075-16.999 9.135-33.998 13.195-50.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path947" d="m19333 3697c2.03-17.999 4.06-34.998 4.06-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path949" d="m19337 3612v-53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path951" d="m19337 3526v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path953" d="m19337 3441v-52.997" fill="none" stroke="#3465af" stroke-width="28.432"
-style=""/><path id="path955" d="m19337 3355v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path957" d="m19337 3270v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path959" d="m19337 3184v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path961" d="m19337 3099v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path963" d="m19337 3014v-53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path965" d="m19337 2928v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path967" d="m19337 2843v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path969" d="m19337 2757v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path971" d="m19337 2672v-52.997" fill="none"
-stroke="#3465af" stroke-width="28.432" style=""/><path id="path973" d="m19337 2586v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path975" d="m19337 2501v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path977" d="m19337 2415v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path979" d="m19337 2330v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path981" d="m19337 2245v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path983" d="m19337 2159.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path985" d="m19337 2074.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path987" d="m19337 1988.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
-id="path989" d="m19337 1903.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path991" d="m19337 1817.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path993" d="m19337 1732.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path995" d="m19337 1647.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path997" d="m19337 1561.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path999" d="m19337 1476.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1001" d="m19337 1390.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1003" d="m19337 1305.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1005" d="m19337
-1219.1c-1.015-16.999-3.045-34.998-5.075-51.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1007" d="m19326 1135.1c-4.06-16.999-8.12-34.998-14.21-50.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1009" d="m19301 1053.1c-6.09-15.999-13.195-32.998-21.315-48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1011" d="m19264 976.12c-9.135-15.999-18.27-30.998-28.42-45.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1013" d="m19216 904.13c-10.15-13.999-21.315-27.998-33.495-41.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1015" d="m19161 838.13c-12.18-12.999-24.36-24.998-37.555-36.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1017" d="m19098 780.14c-14.21-11.999-28.42-21.999-42.63-32.998" fill="none"
-stroke="#3465af" stroke-width="28.432" style=""/><path id="path1019" d="m19028 729.14c-15.225-8.9995-30.45-17.999-46.69-26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1021" d="m18951 688.14c-16.24-7.9995-32.48-13.999-49.735-19.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1023" d="m18870 657.14c-17.255-4.9997-34.51-8.9995-51.765-11.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1025" d="m18786 640.14c-18.27-2.9998-35.525-3.9998-53.795-3.9998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1027" d="m18700 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1029" d="m18612 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1031" d="m18526 636.14h-53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path1033" d="m18439 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1035" d="m18353 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1037" d="m18266 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1039" d="m18179 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1041" d="m18093 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1043" d="m18005 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1045" d="m17919 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1047" d="m17832 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
-id="path1049" d="m17746 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1051" d="m17659 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1053" d="m17572 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1055" d="m17486 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1057" d="m17399 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1059" d="m17312 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1061" d="m17225 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1063" d="m17139 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1065" d="m17052 636.14h-54.81"
-fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1067" d="m16965 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1069" d="m16879 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1071" d="m16792 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1073" d="m16705 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1075" d="m16618 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1077" d="m16532 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1079" d="m16445 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1081" d="m16358 636.14h-53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path1083" d="m16272 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1085" d="m16185 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1087" d="m16098 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1089" d="m16011 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1091" d="m15925 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1093" d="m15837 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1095" d="m15751 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1097" d="m15665 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
-id="path1099" d="m15578 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1101" d="m15491 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1103" d="m15404 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1105" d="m15318 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1107" d="m15230 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1109" d="m15144 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1111" d="m15058 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1113" d="m14971 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1115" d="m14884 636.14h-53.795"
-fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1117" d="m14797 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1119" d="m14711 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1121" d="m14624 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1123" d="m14537 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1125" d="m14451 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1127" d="m14364 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1129" d="m14277 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1131" d="m14190 636.14h-53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path1133" d="m14104 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1135" d="m14017 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1137" d="m13930 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1139" d="m13844 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1141" d="m13757 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1143" d="m13670 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1145" d="m13583 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1147" d="m13497 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
-id="path1149" d="m13410 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1151" d="m13323 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1153" d="m13237 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1155" d="m13150 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1157" d="m13063 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1159" d="m12976 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1161" d="m12890 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1163" d="m12803 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1165" d="m12716 636.14h-53.795"
-fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1167" d="m12630 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1169" d="m12543 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1171" d="m12456 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1173" d="m12369 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1175" d="m12283 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1177" d="m12196 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1179" d="m12109 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1181" d="m12022 636.14h-53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path1183" d="m11936 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1185" d="m11850 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1187" d="m11762 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1189" d="m11676 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1191" d="m11589 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1193" d="m11502 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1195" d="m11415 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1197" d="m11329 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
-id="path1199" d="m11243 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1201" d="m11155 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1203" d="m11069 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1205" d="m10982 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1207" d="m10895 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1209" d="m10808 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1211" d="m10722 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1213" d="m10636 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1215" d="m10548 636.14h-53.795"
-fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1217" d="m10462 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1219" d="m10375 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1221" d="m10288 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1223" d="m10201 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1225" d="m10115 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1227" d="m10029 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1229" d="m9941.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1231" d="m9855 636.14h-53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path1233" d="m9767.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1235" d="m9681.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1237" d="m9594.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1239" d="m9507.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1241" d="m9421.6 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1243" d="m9334.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1245" d="m9248.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1247" d="m9160.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432"
-style=""/><path id="path1249" d="m9074.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1251" d="m8987.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1253" d="m8900.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1255" d="m8814.7 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1257" d="m8727.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1259" d="m8641.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1261" d="m8553.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1263" d="m8467.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1265"
-d="m8380.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1267" d="m8294 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1269" d="m8207.7 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1271" d="m8120.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1273" d="m8034.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1275" d="m7946.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1277" d="m7860.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1279" d="m7773.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1281" d="m7687 636.14h-53.795" fill="none"
-stroke="#3465af" stroke-width="28.432" style=""/><path id="path1283" d="m7599.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1285" d="m7513.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1287" d="m7427.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1289" d="m7339.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1291" d="m7253.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1293" d="m7166.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1295" d="m7080 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1297" d="m6992.7 636.14h-53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path1299" d="m6906.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1301" d="m6820.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1303" d="m6732.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1305" d="m6646.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1307" d="m6559.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1309" d="m6473.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1311" d="m6385.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1313" d="m6299.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432"
-style=""/><path id="path1315" d="m6213.2 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1317" d="m6125.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1319" d="m6039.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1321" d="m5952.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1323" d="m5866.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1325" d="m5778.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1327" d="m5692.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1329" d="m5606.2 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1331"
-d="m5519 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1333" d="m5432.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1335" d="m5345.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1337" d="m5259.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1339" d="m5171.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1341" d="m5085.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1343" d="m4999.3 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1345" d="m4912 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1347" d="m4825.7 636.14h-53.795" fill="none"
-stroke="#3465af" stroke-width="28.432" style=""/><path id="path1349" d="m4738.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1351" d="m4652.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1353" d="m4564.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1355" d="m4478.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1357" d="m4392.3 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1359" d="m4305 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1361" d="m4218.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1363" d="m4131.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432"
-style=""/><path id="path1365" d="m4045.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1367" d="m3957.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1369" d="m3871.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1371" d="m3785.3 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1373" d="m3698 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1375" d="m3611.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1377" d="m3524.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1379" d="m3438.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1381"
-d="m3350.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1383" d="m3264.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1385" d="m3177.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1387" d="m3091.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1389" d="m3004.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1391" d="m2917.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1393" d="m2831.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1395" d="m2743.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1397" d="m2657.7 636.14h-53.795"
-fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1399" d="m2570.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1401" d="m2484.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1403" d="m2397.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1405" d="m2310.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1407" d="m2224.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1409" d="m2137 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1411" d="m2050.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1413" d="m1963.4 636.14h-53.795" fill="none" stroke="#3465af"
-stroke-width="28.432" style=""/><path id="path1415" d="m1877.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1417" d="m1790.9 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1419" d="m1703.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1421" d="m1617.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1423" d="m1530 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1425" d="m1443.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1427" d="m1356.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1429" d="m1270.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
-id="path1431" d="m1183.9 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1433" d="m1096.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1435" d="m1010.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1437" d="m923.03 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><g id="g4044" style=""><rect id="rect1441" x="21109" y="4753.1" width="1213.6" height="1100.7" fill="#f3e777" style=""/><path id="path1443" d="m20656 5536.4v-405.46l150.7-169.16c82.886-93.039 170.53-186.62 194.77-207.96l44.069-38.798 783.23-0.086 783.23-0.086v1227h-1956v-405.46zm1027.7 136.98v-78.372l-169.91 4.925-169.91 4.9249-5.09 45.854c-8.249 74.303 46.711 101.04 207.69 101.04h137.21v-78.372zm235.86-262.94 4.495-341.31 207.2-8.6408 207.2-8.6408
-5.144-46.443c9.596-86.615-41.863-102.05-322.02-96.607l-246.71 4.7956-4.438 419.08-4.439 419.08h149.08l4.494-341.31zm391.3 313.72c26.41-19.286 36.255-41.399 32.697-73.447l-5.09-45.854h-348.1l-5.38 48.984c-9.97 90.771 0.993 97.91 150.36 97.91 99.305 0 148.27-7.6982 175.52-27.594zm-627.16-274.84v-77.768h-348.1v66.246c0 36.436 4.973 71.431 11.051 77.768 6.078 6.3366 84.401 11.521 174.05 11.521h163v-77.768zm659.89-4.9154 5.125-74.042-179.18 4.9155-179.18 4.9155-5.38 48.984c-10.473 95.348-2.259 99.57 183.28 94.197l170.2-4.9284 5.125-74.042zm-659.89-237.63v-78.372l-169.91 4.925-169.91 4.925-5.097 73.447-5.097 73.447h350v-78.372zm659.86 4.925-5.097-73.447h-348.1l-5.38 48.984c-10.289 93.673-2.146 97.91 188.15 97.91h175.52l-5.097-73.447zm-659.86-228.98v-77.768h-137.21c-97.358 0-147.91 7.8138-174.05 26.902-34.952 25.523-49.645 92.242-25.79 117.11 6.078 6.3366 84.401 11.521 174.05
-11.521h163v-77.768z" fill="#ca4677" style=""/></g><text id="text1489" class="TextShape" transform="scale(1.1036 .90616)" x="171.41566" y="9913.7109" fill-rule="evenodd" font-family="Serif, serif" font-size="493.87px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1491" class="TextParagraph" font-family="Serif, serif" font-size="493.87px"/></text>
-<g id="g4048" style=""><rect id="rect1447" x="18797" y="13737" width="2320.7" height="2342.4" fill="#6076b3" style=""/><rect id="rect1451" x="18532" y="13817" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1453" x="18532" y="14076" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1455" x="18532" y="14334" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1457" x="18532" y="14593" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1459" x="18532" y="14851" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round"
-stroke-width="28.222" style=""/><rect id="rect1461" x="18532" y="15110" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1463" x="18532" y="15368" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1465" x="18532" y="15626" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1467" x="18532" y="15884" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1469" x="21080" y="13783" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1471" x="21080" y="14041" width="302.7"
-height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1473" x="21080" y="14299" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1475" x="21080" y="14558" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1477" x="21080" y="14816" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1479" x="21080" y="15075" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1481" x="21080" y="15333" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round"
-stroke-width="28.222" style=""/><rect id="rect1483" x="21080" y="15592" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1485" x="21080" y="15850" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><text id="text1493" transform="scale(1.1036 .90616)" x="17205.688" y="16777.641" fill="#000000" fill-rule="evenodd" font-family="Sans" font-size="856.96px" letter-spacing="0px" stroke-linejoin="round" stroke-width="28.222" word-spacing="0px" style="line-height:125%" line-height="125%" xml:space="preserve"><tspan id="tspan1495" x="17205.688" y="16777.641" style="">CPU</tspan></text>
-</g><text id="text1499" class="TextShape" x="-11700.553" y="565.61298" fill-rule="evenodd" font-family="Serif, serif" font-size="493.88px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1501" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1503" class="TextPosition" transform="matrix(0,-1,1,0,8509,40173)" x="12640.447" y="16397.613" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1505" fill="#000000" font-family="Serif, serif" font-size="493.88px">PCI, USB, SPI, I2C, ...</tspan></tspan></tspan></text>
-<path id="path1511" d="m12408 15562h-1115.1v-1420.3h2230.2v1420.3h-1115.1z" fill="#cfe7f5" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><path id="path1513" d="m12408 15562h-1115.1v-1420.3h2230.2v1420.3h-1115.1z" fill="none" stroke="#3465af" stroke-linejoin="round" stroke-width="19.847" style=""/><text id="text1515" class="TextShape" x="-1394.0863" y="590.73016" fill-rule="evenodd" font-family="Serif, serif" font-size="493.88px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1517" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1519" class="TextPosition" x="11487.915" y="14672.743" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1521" fill="#000000" font-family="Serif, serif" font-size="493.88px">Bridge</tspan></tspan></tspan></text>
-<text id="text1523" class="TextShape" x="-1450.5308" y="1324.5078" fill-rule="evenodd" font-family="Serif, serif" font-size="493.88px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1525" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1527" class="TextPosition" x="11431.471" y="15406.52" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1529" fill="#000000" font-family="Serif, serif" font-size="493.88px"> DMA</tspan></tspan></tspan></text>
-</svg>
diff --git a/Documentation/media/uapi/cec/cec-api.rst b/Documentation/media/uapi/cec/cec-api.rst
deleted file mode 100644
index 0780ba07995a..000000000000
--- a/Documentation/media/uapi/cec/cec-api.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. include:: <isonum.txt>
-
-.. _cec:
-
-#########################################
-Part V - Consumer Electronics Control API
-#########################################
-
-This part describes the CEC: Consumer Electronics Control
-
-
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-    :maxdepth: 5
-    :numbered:
-
-    cec-intro
-    cec-funcs
-    cec-pin-error-inj
-    cec-header
-
-
-**********************
-Revision and Copyright
-**********************
-Authors:
-
-- Verkuil, Hans <hverkuil-cisco@xs4all.nl>
-
- - Initial version.
-
-**Copyright** |copy| 2016 : Hans Verkuil
-
-****************
-Revision History
-****************
-
-:revision: 1.0.0 / 2016-03-17 (*hv*)
-
-Initial revision
diff --git a/Documentation/media/uapi/cec/cec-func-close.rst b/Documentation/media/uapi/cec/cec-func-close.rst
deleted file mode 100644
index e10d675546f8..000000000000
--- a/Documentation/media/uapi/cec/cec-func-close.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _cec-func-close:
-
-***********
-cec close()
-***********
-
-Name
-====
-
-cec-close - Close a cec device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-
-
-.. c:function:: int close( int fd )
-    :name: cec-close
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <cec-open>`.
-
-
-Description
-===========
-
-Closes the cec device. Resources associated with the file descriptor are
-freed. The device configuration remain unchanged.
-
-
-Return Value
-============
-
-:c:func:`close() <cec-close>` returns 0 on success. On error, -1 is returned, and
-``errno`` is set appropriately. Possible error codes are:
-
-``EBADF``
-    ``fd`` is not a valid open file descriptor.
diff --git a/Documentation/media/uapi/cec/cec-func-ioctl.rst b/Documentation/media/uapi/cec/cec-func-ioctl.rst
deleted file mode 100644
index c18d4ba5eb37..000000000000
--- a/Documentation/media/uapi/cec/cec-func-ioctl.rst
+++ /dev/null
@@ -1,73 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _cec-func-ioctl:
-
-***********
-cec ioctl()
-***********
-
-Name
-====
-
-cec-ioctl - Control a cec device
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <sys/ioctl.h>
-
-
-.. c:function:: int ioctl( int fd, int request, void *argp )
-   :name: cec-ioctl
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <cec-open>`.
-
-``request``
-    CEC ioctl request code as defined in the cec.h header file, for
-    example :ref:`CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`.
-
-``argp``
-    Pointer to a request-specific structure.
-
-
-Description
-===========
-
-The :c:func:`ioctl() <cec-ioctl>` function manipulates cec device parameters. The
-argument ``fd`` must be an open file descriptor.
-
-The ioctl ``request`` code specifies the cec function to be called. It
-has encoded in it whether the argument is an input, output or read/write
-parameter, and the size of the argument ``argp`` in bytes.
-
-Macros and structures definitions specifying cec ioctl requests and
-their parameters are located in the cec.h header file. All cec ioctl
-requests, their respective function and parameters are specified in
-:ref:`cec-user-func`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-Request-specific error codes are listed in the individual requests
-descriptions.
-
-When an ioctl that takes an output or read/write parameter fails, the
-parameter remains unmodified.
diff --git a/Documentation/media/uapi/cec/cec-func-open.rst b/Documentation/media/uapi/cec/cec-func-open.rst
deleted file mode 100644
index f235aa80155c..000000000000
--- a/Documentation/media/uapi/cec/cec-func-open.rst
+++ /dev/null
@@ -1,85 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _cec-func-open:
-
-**********
-cec open()
-**********
-
-Name
-====
-
-cec-open - Open a cec device
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <fcntl.h>
-
-
-.. c:function:: int open( const char *device_name, int flags )
-   :name: cec-open
-
-
-Arguments
-=========
-
-``device_name``
-    Device to be opened.
-
-``flags``
-    Open flags. Access mode must be ``O_RDWR``.
-
-    When the ``O_NONBLOCK`` flag is given, the
-    :ref:`CEC_RECEIVE <CEC_RECEIVE>` and :ref:`CEC_DQEVENT <CEC_DQEVENT>` ioctls
-    will return the ``EAGAIN`` error code when no message or event is available, and
-    ioctls :ref:`CEC_TRANSMIT <CEC_TRANSMIT>`,
-    :ref:`CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` and
-    :ref:`CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
-    all return 0.
-
-    Other flags have no effect.
-
-
-Description
-===========
-
-To open a cec device applications call :c:func:`open() <cec-open>` with the
-desired device name. The function has no side effects; the device
-configuration remain unchanged.
-
-When the device is opened in read-only mode, attempts to modify its
-configuration will result in an error, and ``errno`` will be set to
-EBADF.
-
-
-Return Value
-============
-
-:c:func:`open() <cec-open>` returns the new file descriptor on success. On error,
--1 is returned, and ``errno`` is set appropriately. Possible error codes
-include:
-
-``EACCES``
-    The requested access to the file is not allowed.
-
-``EMFILE``
-    The process already has the maximum number of files open.
-
-``ENFILE``
-    The system limit on the total number of open files has been reached.
-
-``ENOMEM``
-    Insufficient kernel memory was available.
-
-``ENXIO``
-    No device corresponding to this device special file exists.
diff --git a/Documentation/media/uapi/cec/cec-func-poll.rst b/Documentation/media/uapi/cec/cec-func-poll.rst
deleted file mode 100644
index 3f6c5b0effa3..000000000000
--- a/Documentation/media/uapi/cec/cec-func-poll.rst
+++ /dev/null
@@ -1,85 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _cec-func-poll:
-
-**********
-cec poll()
-**********
-
-Name
-====
-
-cec-poll - Wait for some event on a file descriptor
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <sys/poll.h>
-
-
-.. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout )
-   :name: cec-poll
-
-Arguments
-=========
-
-``ufds``
-   List of FD events to be watched
-
-``nfds``
-   Number of FD events at the \*ufds array
-
-``timeout``
-   Timeout to wait for events
-
-
-Description
-===========
-
-With the :c:func:`poll() <cec-poll>` function applications can wait for CEC
-events.
-
-On success :c:func:`poll() <cec-poll>` returns the number of file descriptors
-that have been selected (that is, file descriptors for which the
-``revents`` field of the respective struct :c:type:`pollfd`
-is non-zero). CEC devices set the ``POLLIN`` and ``POLLRDNORM`` flags in
-the ``revents`` field if there are messages in the receive queue. If the
-transmit queue has room for new messages, the ``POLLOUT`` and
-``POLLWRNORM`` flags are set. If there are events in the event queue,
-then the ``POLLPRI`` flag is set. When the function times out it returns
-a value of zero, on failure it returns -1 and the ``errno`` variable is
-set appropriately.
-
-For more details see the :c:func:`poll() <cec-poll>` manual page.
-
-
-Return Value
-============
-
-On success, :c:func:`poll() <cec-poll>` returns the number structures which have
-non-zero ``revents`` fields, or zero if the call timed out. On error -1
-is returned, and the ``errno`` variable is set appropriately:
-
-``EBADF``
-    One or more of the ``ufds`` members specify an invalid file
-    descriptor.
-
-``EFAULT``
-    ``ufds`` references an inaccessible memory area.
-
-``EINTR``
-    The call was interrupted by a signal.
-
-``EINVAL``
-    The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use
-    ``getrlimit()`` to obtain this value.
diff --git a/Documentation/media/uapi/cec/cec-funcs.rst b/Documentation/media/uapi/cec/cec-funcs.rst
deleted file mode 100644
index dc6da9c639a8..000000000000
--- a/Documentation/media/uapi/cec/cec-funcs.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _cec-user-func:
-
-******************
-Function Reference
-******************
-
-
-.. toctree::
-    :maxdepth: 1
-
-    cec-func-open
-    cec-func-close
-    cec-func-ioctl
-    cec-func-poll
-    cec-ioc-adap-g-caps
-    cec-ioc-adap-g-log-addrs
-    cec-ioc-adap-g-phys-addr
-    cec-ioc-adap-g-conn-info
-    cec-ioc-dqevent
-    cec-ioc-g-mode
-    cec-ioc-receive
diff --git a/Documentation/media/uapi/cec/cec-header.rst b/Documentation/media/uapi/cec/cec-header.rst
deleted file mode 100644
index 726f9766a130..000000000000
--- a/Documentation/media/uapi/cec/cec-header.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _cec_header:
-
-***************
-CEC Header File
-***************
-
-.. kernel-include:: $BUILDDIR/cec.h.rst
-
diff --git a/Documentation/media/uapi/cec/cec-intro.rst b/Documentation/media/uapi/cec/cec-intro.rst
deleted file mode 100644
index 05088fcefe81..000000000000
--- a/Documentation/media/uapi/cec/cec-intro.rst
+++ /dev/null
@@ -1,49 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _cec-intro:
-
-Introduction
-============
-
-HDMI connectors provide a single pin for use by the Consumer Electronics
-Control protocol. This protocol allows different devices connected by an
-HDMI cable to communicate. The protocol for CEC version 1.4 is defined
-in supplements 1 (CEC) and 2 (HEAC or HDMI Ethernet and Audio Return
-Channel) of the HDMI 1.4a (:ref:`hdmi`) specification and the
-extensions added to CEC version 2.0 are defined in chapter 11 of the
-HDMI 2.0 (:ref:`hdmi2`) specification.
-
-The bitrate is very slow (effectively no more than 36 bytes per second)
-and is based on the ancient AV.link protocol used in old SCART
-connectors. The protocol closely resembles a crazy Rube Goldberg
-contraption and is an unholy mix of low and high level messages. Some
-messages, especially those part of the HEAC protocol layered on top of
-CEC, need to be handled by the kernel, others can be handled either by
-the kernel or by userspace.
-
-In addition, CEC can be implemented in HDMI receivers, transmitters and
-in USB devices that have an HDMI input and an HDMI output and that
-control just the CEC pin.
-
-Drivers that support CEC will create a CEC device node (/dev/cecX) to
-give userspace access to the CEC adapter. The
-:ref:`CEC_ADAP_G_CAPS` ioctl will tell userspace what it is allowed to do.
-
-In order to check the support and test it, it is suggested to download
-the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ package. It
-provides three tools to handle CEC:
-
-- cec-ctl: the Swiss army knife of CEC. Allows you to configure, transmit
-  and monitor CEC messages.
-
-- cec-compliance: does a CEC compliance test of a remote CEC device to
-  determine how compliant the CEC implementation is.
-
-- cec-follower: emulates a CEC follower.
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
deleted file mode 100644
index 76761a98c312..000000000000
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
+++ /dev/null
@@ -1,150 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CEC_ADAP_G_CAPS:
-
-*********************
-ioctl CEC_ADAP_G_CAPS
-*********************
-
-Name
-====
-
-CEC_ADAP_G_CAPS - Query device capabilities
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, CEC_ADAP_G_CAPS, struct cec_caps *argp )
-    :name: CEC_ADAP_G_CAPS
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <cec-open>`.
-
-``argp``
-
-
-Description
-===========
-
-All cec devices must support :ref:`ioctl CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`. To query
-device information, applications call the ioctl with a pointer to a
-struct :c:type:`cec_caps`. The driver fills the structure and
-returns the information to the application. The ioctl never fails.
-
-.. tabularcolumns:: |p{1.2cm}|p{2.5cm}|p{13.8cm}|
-
-.. c:type:: cec_caps
-
-.. flat-table:: struct cec_caps
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 16
-
-    * - char
-      - ``driver[32]``
-      - The name of the cec adapter driver.
-    * - char
-      - ``name[32]``
-      - The name of this CEC adapter. The combination ``driver`` and
-	``name`` must be unique.
-    * - __u32
-      - ``capabilities``
-      - The capabilities of the CEC adapter, see
-	:ref:`cec-capabilities`.
-    * - __u32
-      - ``version``
-      - CEC Framework API version, formatted with the ``KERNEL_VERSION()``
-	macro.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
-
-.. _cec-capabilities:
-
-.. flat-table:: CEC Capabilities Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 8
-
-    * .. _`CEC-CAP-PHYS-ADDR`:
-
-      - ``CEC_CAP_PHYS_ADDR``
-      - 0x00000001
-      - Userspace has to configure the physical address by calling
-	:ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`. If
-	this capability isn't set, then setting the physical address is
-	handled by the kernel whenever the EDID is set (for an HDMI
-	receiver) or read (for an HDMI transmitter).
-    * .. _`CEC-CAP-LOG-ADDRS`:
-
-      - ``CEC_CAP_LOG_ADDRS``
-      - 0x00000002
-      - Userspace has to configure the logical addresses by calling
-	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. If
-	this capability isn't set, then the kernel will have configured
-	this.
-    * .. _`CEC-CAP-TRANSMIT`:
-
-      - ``CEC_CAP_TRANSMIT``
-      - 0x00000004
-      - Userspace can transmit CEC messages by calling
-	:ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. This implies that
-	userspace can be a follower as well, since being able to transmit
-	messages is a prerequisite of becoming a follower. If this
-	capability isn't set, then the kernel will handle all CEC
-	transmits and process all CEC messages it receives.
-    * .. _`CEC-CAP-PASSTHROUGH`:
-
-      - ``CEC_CAP_PASSTHROUGH``
-      - 0x00000008
-      - Userspace can use the passthrough mode by calling
-	:ref:`ioctl CEC_S_MODE <CEC_S_MODE>`.
-    * .. _`CEC-CAP-RC`:
-
-      - ``CEC_CAP_RC``
-      - 0x00000010
-      - This adapter supports the remote control protocol.
-    * .. _`CEC-CAP-MONITOR-ALL`:
-
-      - ``CEC_CAP_MONITOR_ALL``
-      - 0x00000020
-      - The CEC hardware can monitor all messages, not just directed and
-	broadcast messages.
-    * .. _`CEC-CAP-NEEDS-HPD`:
-
-      - ``CEC_CAP_NEEDS_HPD``
-      - 0x00000040
-      - The CEC hardware is only active if the HDMI Hotplug Detect pin is
-        high. This makes it impossible to use CEC to wake up displays that
-	set the HPD pin low when in standby mode, but keep the CEC bus
-	alive.
-    * .. _`CEC-CAP-MONITOR-PIN`:
-
-      - ``CEC_CAP_MONITOR_PIN``
-      - 0x00000080
-      - The CEC hardware can monitor CEC pin changes from low to high voltage
-        and vice versa. When in pin monitoring mode the application will
-	receive ``CEC_EVENT_PIN_CEC_LOW`` and ``CEC_EVENT_PIN_CEC_HIGH`` events.
-    * .. _`CEC-CAP-CONNECTOR-INFO`:
-
-      - ``CEC_CAP_CONNECTOR_INFO``
-      - 0x00000100
-      - If this capability is set, then :ref:`CEC_ADAP_G_CONNECTOR_INFO` can
-        be used.
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-conn-info.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-conn-info.rst
deleted file mode 100644
index 6818ddf1495c..000000000000
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-conn-info.rst
+++ /dev/null
@@ -1,105 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-..
-.. Copyright 2019 Google LLC
-..
-.. _CEC_ADAP_G_CONNECTOR_INFO:
-
-*******************************
-ioctl CEC_ADAP_G_CONNECTOR_INFO
-*******************************
-
-Name
-====
-
-CEC_ADAP_G_CONNECTOR_INFO - Query HDMI connector information
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, CEC_ADAP_G_CONNECTOR_INFO, struct cec_connector_info *argp )
-    :name: CEC_ADAP_G_CONNECTOR_INFO
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <cec-open>`.
-
-``argp``
-
-
-Description
-===========
-
-Using this ioctl an application can learn which HDMI connector this CEC
-device corresponds to. While calling this ioctl the application should
-provide a pointer to a cec_connector_info struct which will be populated
-by the kernel with the info provided by the adapter's driver. This ioctl
-is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set.
-
-.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}|
-
-.. c:type:: cec_connector_info
-
-.. flat-table:: struct cec_connector_info
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 8
-
-    * - __u32
-      - ``type``
-      - The type of connector this adapter is associated with.
-    * - union {
-      - ``(anonymous)``
-    * - ``struct cec_drm_connector_info``
-      - drm
-      - :ref:`cec-drm-connector-info`
-    * - }
-      -
-
-
-.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
-
-.. _connector-type:
-
-.. flat-table:: Connector types
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 8
-
-    * .. _`CEC-CONNECTOR-TYPE-NO-CONNECTOR`:
-
-      - ``CEC_CONNECTOR_TYPE_NO_CONNECTOR``
-      - 0
-      - No connector is associated with the adapter/the information is not
-        provided by the driver.
-    * .. _`CEC-CONNECTOR-TYPE-DRM`:
-
-      - ``CEC_CONNECTOR_TYPE_DRM``
-      - 1
-      - Indicates that a DRM connector is associated with this adapter.
-        Information about the connector can be found in
-	:ref:`cec-drm-connector-info`.
-
-.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
-
-.. c:type:: cec_drm_connector_info
-
-.. _cec-drm-connector-info:
-
-.. flat-table:: struct cec_drm_connector_info
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 8
-
-    * .. _`CEC-DRM-CONNECTOR-TYPE-CARD-NO`:
-
-      - __u32
-      - ``card_no``
-      - DRM card number: the number from a card's path, e.g. 0 in case of
-        /dev/card0.
-    * .. _`CEC-DRM-CONNECTOR-TYPE-CONNECTOR_ID`:
-
-      - __u32
-      - ``connector_id``
-      - DRM connector ID.
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
deleted file mode 100644
index 26465094e3f1..000000000000
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
+++ /dev/null
@@ -1,378 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CEC_ADAP_LOG_ADDRS:
-.. _CEC_ADAP_G_LOG_ADDRS:
-.. _CEC_ADAP_S_LOG_ADDRS:
-
-****************************************************
-ioctls CEC_ADAP_G_LOG_ADDRS and CEC_ADAP_S_LOG_ADDRS
-****************************************************
-
-Name
-====
-
-CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS - Get or set the logical addresses
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, CEC_ADAP_G_LOG_ADDRS, struct cec_log_addrs *argp )
-   :name: CEC_ADAP_G_LOG_ADDRS
-
-.. c:function:: int ioctl( int fd, CEC_ADAP_S_LOG_ADDRS, struct cec_log_addrs *argp )
-   :name: CEC_ADAP_S_LOG_ADDRS
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <cec-open>`.
-
-``argp``
-    Pointer to struct :c:type:`cec_log_addrs`.
-
-Description
-===========
-
-To query the current CEC logical addresses, applications call
-:ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a
-struct :c:type:`cec_log_addrs` where the driver stores the logical addresses.
-
-To set new logical addresses, applications fill in
-struct :c:type:`cec_log_addrs` and call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
-with a pointer to this struct. The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
-is only available if ``CEC_CAP_LOG_ADDRS`` is set (the ``ENOTTY`` error code is
-returned otherwise). The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
-can only be called by a file descriptor in initiator mode (see :ref:`CEC_S_MODE`), if not
-the ``EBUSY`` error code will be returned.
-
-To clear existing logical addresses set ``num_log_addrs`` to 0. All other fields
-will be ignored in that case. The adapter will go to the unconfigured state and the
-``cec_version``, ``vendor_id`` and ``osd_name`` fields are all reset to their default
-values (CEC version 2.0, no vendor ID and an empty OSD name).
-
-If the physical address is valid (see :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`),
-then this ioctl will block until all requested logical
-addresses have been claimed. If the file descriptor is in non-blocking mode then it will
-not wait for the logical addresses to be claimed, instead it just returns 0.
-
-A :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` event is sent when the
-logical addresses are claimed or cleared.
-
-Attempting to call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` when
-logical address types are already defined will return with error ``EBUSY``.
-
-.. c:type:: cec_log_addrs
-
-.. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{7.5cm}|
-
-.. cssclass:: longtable
-
-.. flat-table:: struct cec_log_addrs
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 16
-
-    * - __u8
-      - ``log_addr[CEC_MAX_LOG_ADDRS]``
-      - The actual logical addresses that were claimed. This is set by the
-	driver. If no logical address could be claimed, then it is set to
-	``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then
-	``log_addr[0]`` is set to 0xf and all others to
-	``CEC_LOG_ADDR_INVALID``.
-    * - __u16
-      - ``log_addr_mask``
-      - The bitmask of all logical addresses this adapter has claimed. If
-	this adapter is Unregistered then ``log_addr_mask`` sets bit 15
-	and clears all other bits. If this adapter is not configured at
-	all, then ``log_addr_mask`` is set to 0. Set by the driver.
-    * - __u8
-      - ``cec_version``
-      - The CEC version that this adapter shall use. See
-	:ref:`cec-versions`. Used to implement the
-	``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages.
-	Note that :ref:`CEC_OP_CEC_VERSION_1_3A <CEC-OP-CEC-VERSION-1-3A>` is not allowed by the CEC
-	framework.
-    * - __u8
-      - ``num_log_addrs``
-      - Number of logical addresses to set up. Must be ≤
-	``available_log_addrs`` as returned by
-	:ref:`CEC_ADAP_G_CAPS`. All arrays in
-	this structure are only filled up to index
-	``available_log_addrs``-1. The remaining array elements will be
-	ignored. Note that the CEC 2.0 standard allows for a maximum of 2
-	logical addresses, although some hardware has support for more.
-	``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual
-	number of logical addresses it could claim, which may be less than
-	what was requested. If this field is set to 0, then the CEC
-	adapter shall clear all claimed logical addresses and all other
-	fields will be ignored.
-    * - __u32
-      - ``vendor_id``
-      - The vendor ID is a 24-bit number that identifies the specific
-	vendor or entity. Based on this ID vendor specific commands may be
-	defined. If you do not want a vendor ID then set it to
-	``CEC_VENDOR_ID_NONE``.
-    * - __u32
-      - ``flags``
-      - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags.
-    * - char
-      - ``osd_name[15]``
-      - The On-Screen Display name as is returned by the
-	``CEC_MSG_SET_OSD_NAME`` message.
-    * - __u8
-      - ``primary_device_type[CEC_MAX_LOG_ADDRS]``
-      - Primary device type for each logical address. See
-	:ref:`cec-prim-dev-types` for possible types.
-    * - __u8
-      - ``log_addr_type[CEC_MAX_LOG_ADDRS]``
-      - Logical address types. See :ref:`cec-log-addr-types` for
-	possible types. The driver will update this with the actual
-	logical address type that it claimed (e.g. it may have to fallback
-	to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED <CEC-LOG-ADDR-TYPE-UNREGISTERED>`).
-    * - __u8
-      - ``all_device_types[CEC_MAX_LOG_ADDRS]``
-      - CEC 2.0 specific: the bit mask of all device types. See
-	:ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0
-	``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave
-	this field to 0, or fill it in according to the CEC 2.0 guidelines to
-	give the CEC framework more information about the device type, even
-	though the framework won't use it directly in the CEC message.
-    * - __u8
-      - ``features[CEC_MAX_LOG_ADDRS][12]``
-      - Features for each logical address. It is used in the CEC 2.0
-	``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the
-	RC Profile and the Device Features. For CEC 1.4 you can either leave
-        this field to all 0, or fill it in according to the CEC 2.0 guidelines to
-        give the CEC framework more information about the device type, even
-        though the framework won't use it directly in the CEC message.
-
-
-.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
-
-.. _cec-log-addrs-flags:
-
-.. flat-table:: Flags for struct cec_log_addrs
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`:
-
-      - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK``
-      - 1
-      - By default if no logical address of the requested type can be claimed, then
-	it will go back to the unconfigured state. If this flag is set, then it will
-	fallback to the Unregistered logical address. Note that if the Unregistered
-	logical address was explicitly requested, then this flag has no effect.
-    * .. _`CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU`:
-
-      - ``CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU``
-      - 2
-      - By default the ``CEC_MSG_USER_CONTROL_PRESSED`` and ``CEC_MSG_USER_CONTROL_RELEASED``
-        messages are only passed on to the follower(s), if any. If this flag is set,
-	then these messages are also passed on to the remote control input subsystem
-	and will appear as keystrokes. This features needs to be enabled explicitly.
-	If CEC is used to enter e.g. passwords, then you may not want to enable this
-	to avoid trivial snooping of the keystrokes.
-    * .. _`CEC-LOG-ADDRS-FL-CDC-ONLY`:
-
-      - ``CEC_LOG_ADDRS_FL_CDC_ONLY``
-      - 4
-      - If this flag is set, then the device is CDC-Only. CDC-Only CEC devices
-	are CEC devices that can only handle CDC messages.
-
-	All other messages are ignored.
-
-
-.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
-
-.. _cec-versions:
-
-.. flat-table:: CEC Versions
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * .. _`CEC-OP-CEC-VERSION-1-3A`:
-
-      - ``CEC_OP_CEC_VERSION_1_3A``
-      - 4
-      - CEC version according to the HDMI 1.3a standard.
-    * .. _`CEC-OP-CEC-VERSION-1-4B`:
-
-      - ``CEC_OP_CEC_VERSION_1_4B``
-      - 5
-      - CEC version according to the HDMI 1.4b standard.
-    * .. _`CEC-OP-CEC-VERSION-2-0`:
-
-      - ``CEC_OP_CEC_VERSION_2_0``
-      - 6
-      - CEC version according to the HDMI 2.0 standard.
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _cec-prim-dev-types:
-
-.. flat-table:: CEC Primary Device Types
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * .. _`CEC-OP-PRIM-DEVTYPE-TV`:
-
-      - ``CEC_OP_PRIM_DEVTYPE_TV``
-      - 0
-      - Use for a TV.
-    * .. _`CEC-OP-PRIM-DEVTYPE-RECORD`:
-
-      - ``CEC_OP_PRIM_DEVTYPE_RECORD``
-      - 1
-      - Use for a recording device.
-    * .. _`CEC-OP-PRIM-DEVTYPE-TUNER`:
-
-      - ``CEC_OP_PRIM_DEVTYPE_TUNER``
-      - 3
-      - Use for a device with a tuner.
-    * .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`:
-
-      - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK``
-      - 4
-      - Use for a playback device.
-    * .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`:
-
-      - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM``
-      - 5
-      - Use for an audio system (e.g. an audio/video receiver).
-    * .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`:
-
-      - ``CEC_OP_PRIM_DEVTYPE_SWITCH``
-      - 6
-      - Use for a CEC switch.
-    * .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`:
-
-      - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC``
-      - 7
-      - Use for a video processor device.
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _cec-log-addr-types:
-
-.. flat-table:: CEC Logical Address Types
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 16
-
-    * .. _`CEC-LOG-ADDR-TYPE-TV`:
-
-      - ``CEC_LOG_ADDR_TYPE_TV``
-      - 0
-      - Use for a TV.
-    * .. _`CEC-LOG-ADDR-TYPE-RECORD`:
-
-      - ``CEC_LOG_ADDR_TYPE_RECORD``
-      - 1
-      - Use for a recording device.
-    * .. _`CEC-LOG-ADDR-TYPE-TUNER`:
-
-      - ``CEC_LOG_ADDR_TYPE_TUNER``
-      - 2
-      - Use for a tuner device.
-    * .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`:
-
-      - ``CEC_LOG_ADDR_TYPE_PLAYBACK``
-      - 3
-      - Use for a playback device.
-    * .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`:
-
-      - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM``
-      - 4
-      - Use for an audio system device.
-    * .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`:
-
-      - ``CEC_LOG_ADDR_TYPE_SPECIFIC``
-      - 5
-      - Use for a second TV or for a video processor device.
-    * .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`:
-
-      - ``CEC_LOG_ADDR_TYPE_UNREGISTERED``
-      - 6
-      - Use this if you just want to remain unregistered. Used for pure
-	CEC switches or CDC-only devices (CDC: Capability Discovery and
-	Control).
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _cec-all-dev-types-flags:
-
-.. flat-table:: CEC All Device Types Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * .. _`CEC-OP-ALL-DEVTYPE-TV`:
-
-      - ``CEC_OP_ALL_DEVTYPE_TV``
-      - 0x80
-      - This supports the TV type.
-    * .. _`CEC-OP-ALL-DEVTYPE-RECORD`:
-
-      - ``CEC_OP_ALL_DEVTYPE_RECORD``
-      - 0x40
-      - This supports the Recording type.
-    * .. _`CEC-OP-ALL-DEVTYPE-TUNER`:
-
-      - ``CEC_OP_ALL_DEVTYPE_TUNER``
-      - 0x20
-      - This supports the Tuner type.
-    * .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`:
-
-      - ``CEC_OP_ALL_DEVTYPE_PLAYBACK``
-      - 0x10
-      - This supports the Playback type.
-    * .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`:
-
-      - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM``
-      - 0x08
-      - This supports the Audio System type.
-    * .. _`CEC-OP-ALL-DEVTYPE-SWITCH`:
-
-      - ``CEC_OP_ALL_DEVTYPE_SWITCH``
-      - 0x04
-      - This supports the CEC Switch or Video Processing type.
-
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` can return the following
-error codes:
-
-ENOTTY
-    The ``CEC_CAP_LOG_ADDRS`` capability wasn't set, so this ioctl is not supported.
-
-EBUSY
-    The CEC adapter is currently configuring itself, or it is already configured and
-    ``num_log_addrs`` is non-zero, or another filehandle is in exclusive follower or
-    initiator mode, or the filehandle is in mode ``CEC_MODE_NO_INITIATOR``.
-
-EINVAL
-    The contents of struct :c:type:`cec_log_addrs` is invalid.
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst
deleted file mode 100644
index 693be2f9bf2e..000000000000
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst
+++ /dev/null
@@ -1,100 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CEC_ADAP_PHYS_ADDR:
-.. _CEC_ADAP_G_PHYS_ADDR:
-.. _CEC_ADAP_S_PHYS_ADDR:
-
-****************************************************
-ioctls CEC_ADAP_G_PHYS_ADDR and CEC_ADAP_S_PHYS_ADDR
-****************************************************
-
-Name
-====
-
-CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR - Get or set the physical address
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, CEC_ADAP_G_PHYS_ADDR, __u16 *argp )
-    :name: CEC_ADAP_G_PHYS_ADDR
-
-.. c:function:: int ioctl( int fd, CEC_ADAP_S_PHYS_ADDR, __u16 *argp )
-    :name: CEC_ADAP_S_PHYS_ADDR
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <cec-open>`.
-
-``argp``
-    Pointer to the CEC address.
-
-Description
-===========
-
-To query the current physical address applications call
-:ref:`ioctl CEC_ADAP_G_PHYS_ADDR <CEC_ADAP_G_PHYS_ADDR>` with a pointer to a __u16 where the
-driver stores the physical address.
-
-To set a new physical address applications store the physical address in
-a __u16 and call :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` with a pointer to
-this integer. The :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` is only available if
-``CEC_CAP_PHYS_ADDR`` is set (the ``ENOTTY`` error code will be returned
-otherwise). The :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` can only be called
-by a file descriptor in initiator mode (see :ref:`CEC_S_MODE`), if not
-the ``EBUSY`` error code will be returned.
-
-To clear an existing physical address use ``CEC_PHYS_ADDR_INVALID``.
-The adapter will go to the unconfigured state.
-
-If logical address types have been defined (see :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`),
-then this ioctl will block until all
-requested logical addresses have been claimed. If the file descriptor is in non-blocking mode
-then it will not wait for the logical addresses to be claimed, instead it just returns 0.
-
-A :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` event is sent when the physical address
-changes.
-
-The physical address is a 16-bit number where each group of 4 bits
-represent a digit of the physical address a.b.c.d where the most
-significant 4 bits represent 'a'. The CEC root device (usually the TV)
-has address 0.0.0.0. Every device that is hooked up to an input of the
-TV has address a.0.0.0 (where 'a' is ≥ 1), devices hooked up to those in
-turn have addresses a.b.0.0, etc. So a topology of up to 5 devices deep
-is supported. The physical address a device shall use is stored in the
-EDID of the sink.
-
-For example, the EDID for each HDMI input of the TV will have a
-different physical address of the form a.0.0.0 that the sources will
-read out and use as their physical address.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-The :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` can return the following
-error codes:
-
-ENOTTY
-    The ``CEC_CAP_PHYS_ADDR`` capability wasn't set, so this ioctl is not supported.
-
-EBUSY
-    Another filehandle is in exclusive follower or initiator mode, or the filehandle
-    is in mode ``CEC_MODE_NO_INITIATOR``.
-
-EINVAL
-    The physical address is malformed.
diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
deleted file mode 100644
index d16b226b1bef..000000000000
--- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
+++ /dev/null
@@ -1,257 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CEC_DQEVENT:
-
-*****************
-ioctl CEC_DQEVENT
-*****************
-
-Name
-====
-
-CEC_DQEVENT - Dequeue a CEC event
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, CEC_DQEVENT, struct cec_event *argp )
-    :name: CEC_DQEVENT
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <cec-open>`.
-
-``argp``
-
-
-Description
-===========
-
-CEC devices can send asynchronous events. These can be retrieved by
-calling :c:func:`CEC_DQEVENT`. If the file descriptor is in
-non-blocking mode and no event is pending, then it will return -1 and
-set errno to the ``EAGAIN`` error code.
-
-The internal event queues are per-filehandle and per-event type. If
-there is no more room in a queue then the last event is overwritten with
-the new one. This means that intermediate results can be thrown away but
-that the latest event is always available. This also means that is it
-possible to read two successive events that have the same value (e.g.
-two :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` events with
-the same state). In that case the intermediate state changes were lost but
-it is guaranteed that the state did change in between the two events.
-
-.. tabularcolumns:: |p{1.2cm}|p{2.9cm}|p{13.4cm}|
-
-.. c:type:: cec_event_state_change
-
-.. flat-table:: struct cec_event_state_change
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 8
-
-    * - __u16
-      - ``phys_addr``
-      - The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no
-        valid physical address is set.
-    * - __u16
-      - ``log_addr_mask``
-      - The current set of claimed logical addresses. This is 0 if no logical
-        addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
-	If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
-	has the unregistered logical address. In that case all other bits are 0.
-    * - __u16
-      - ``have_conn_info``
-      - If non-zero, then HDMI connector information is available.
-        This field is only valid if ``CEC_CAP_CONNECTOR_INFO`` is set. If that
-        capability is set and ``have_conn_info`` is zero, then that indicates
-        that the HDMI connector device is not instantiated, either because
-        the HDMI driver is still configuring the device or because the HDMI
-        device was unbound.
-
-
-.. c:type:: cec_event_lost_msgs
-
-.. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.5cm}|
-
-.. flat-table:: struct cec_event_lost_msgs
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 16
-
-    * - __u32
-      - ``lost_msgs``
-      - Set to the number of lost messages since the filehandle was opened
-	or since the last time this event was dequeued for this
-	filehandle. The messages lost are the oldest messages. So when a
-	new message arrives and there is no more room, then the oldest
-	message is discarded to make room for the new one. The internal
-	size of the message queue guarantees that all messages received in
-	the last two seconds will be stored. Since messages should be
-	replied to within a second according to the CEC specification,
-	this is more than enough.
-
-
-.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}|
-
-.. c:type:: cec_event
-
-.. flat-table:: struct cec_event
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 8
-
-    * - __u64
-      - ``ts``
-      - Timestamp of the event in ns.
-
-	The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock.
-
-	To access the same clock from userspace use :c:func:`clock_gettime`.
-    * - __u32
-      - ``event``
-      - The CEC event type, see :ref:`cec-events`.
-    * - __u32
-      - ``flags``
-      - Event flags, see :ref:`cec-event-flags`.
-    * - union {
-      - (anonymous)
-    * - struct cec_event_state_change
-      - ``state_change``
-      - The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>`
-	event.
-    * - struct cec_event_lost_msgs
-      - ``lost_msgs``
-      - The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS <CEC-EVENT-LOST-MSGS>`
-	event.
-    * - }
-      -
-
-
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
-
-.. _cec-events:
-
-.. flat-table:: CEC Events Types
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 16
-
-    * .. _`CEC-EVENT-STATE-CHANGE`:
-
-      - ``CEC_EVENT_STATE_CHANGE``
-      - 1
-      - Generated when the CEC Adapter's state changes. When open() is
-	called an initial event will be generated for that filehandle with
-	the CEC Adapter's state at that time.
-    * .. _`CEC-EVENT-LOST-MSGS`:
-
-      - ``CEC_EVENT_LOST_MSGS``
-      - 2
-      - Generated if one or more CEC messages were lost because the
-	application didn't dequeue CEC messages fast enough.
-    * .. _`CEC-EVENT-PIN-CEC-LOW`:
-
-      - ``CEC_EVENT_PIN_CEC_LOW``
-      - 3
-      - Generated if the CEC pin goes from a high voltage to a low voltage.
-        Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
-	capability set.
-    * .. _`CEC-EVENT-PIN-CEC-HIGH`:
-
-      - ``CEC_EVENT_PIN_CEC_HIGH``
-      - 4
-      - Generated if the CEC pin goes from a low voltage to a high voltage.
-        Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
-	capability set.
-    * .. _`CEC-EVENT-PIN-HPD-LOW`:
-
-      - ``CEC_EVENT_PIN_HPD_LOW``
-      - 5
-      - Generated if the HPD pin goes from a high voltage to a low voltage.
-	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
-	capability set. When open() is called, the HPD pin can be read and
-	if the HPD is low, then an initial event will be generated for that
-	filehandle.
-    * .. _`CEC-EVENT-PIN-HPD-HIGH`:
-
-      - ``CEC_EVENT_PIN_HPD_HIGH``
-      - 6
-      - Generated if the HPD pin goes from a low voltage to a high voltage.
-	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
-	capability set. When open() is called, the HPD pin can be read and
-	if the HPD is high, then an initial event will be generated for that
-	filehandle.
-    * .. _`CEC-EVENT-PIN-5V-LOW`:
-
-      - ``CEC_EVENT_PIN_5V_LOW``
-      - 6
-      - Generated if the 5V pin goes from a high voltage to a low voltage.
-	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
-	capability set. When open() is called, the 5V pin can be read and
-	if the 5V is low, then an initial event will be generated for that
-	filehandle.
-    * .. _`CEC-EVENT-PIN-5V-HIGH`:
-
-      - ``CEC_EVENT_PIN_5V_HIGH``
-      - 7
-      - Generated if the 5V pin goes from a low voltage to a high voltage.
-	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
-	capability set. When open() is called, the 5V pin can be read and
-	if the 5V is high, then an initial event will be generated for that
-	filehandle.
-
-
-.. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}|
-
-.. _cec-event-flags:
-
-.. flat-table:: CEC Event Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 8
-
-    * .. _`CEC-EVENT-FL-INITIAL-STATE`:
-
-      - ``CEC_EVENT_FL_INITIAL_STATE``
-      - 1
-      - Set for the initial events that are generated when the device is
-	opened. See the table above for which events do this. This allows
-	applications to learn the initial state of the CEC adapter at
-	open() time.
-    * .. _`CEC-EVENT-FL-DROPPED-EVENTS`:
-
-      - ``CEC_EVENT_FL_DROPPED_EVENTS``
-      - 2
-      - Set if one or more events of the given event type have been dropped.
-        This is an indication that the application cannot keep up.
-
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-The :ref:`ioctl CEC_DQEVENT <CEC_DQEVENT>` can return the following
-error codes:
-
-EAGAIN
-    This is returned when the filehandle is in non-blocking mode and there
-    are no pending events.
-
-ERESTARTSYS
-    An interrupt (e.g. Ctrl-C) arrived while in blocking mode waiting for
-    events to arrive.
diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
deleted file mode 100644
index 2535b77e3459..000000000000
--- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
+++ /dev/null
@@ -1,301 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CEC_MODE:
-.. _CEC_G_MODE:
-.. _CEC_S_MODE:
-
-********************************
-ioctls CEC_G_MODE and CEC_S_MODE
-********************************
-
-CEC_G_MODE, CEC_S_MODE - Get or set exclusive use of the CEC adapter
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, CEC_G_MODE, __u32 *argp )
-   :name: CEC_G_MODE
-
-.. c:function:: int ioctl( int fd, CEC_S_MODE, __u32 *argp )
-   :name: CEC_S_MODE
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <cec-open>`.
-
-``argp``
-    Pointer to CEC mode.
-
-Description
-===========
-
-By default any filehandle can use :ref:`CEC_TRANSMIT`, but in order to prevent
-applications from stepping on each others toes it must be possible to
-obtain exclusive access to the CEC adapter. This ioctl sets the
-filehandle to initiator and/or follower mode which can be exclusive
-depending on the chosen mode. The initiator is the filehandle that is
-used to initiate messages, i.e. it commands other CEC devices. The
-follower is the filehandle that receives messages sent to the CEC
-adapter and processes them. The same filehandle can be both initiator
-and follower, or this role can be taken by two different filehandles.
-
-When a CEC message is received, then the CEC framework will decide how
-it will be processed. If the message is a reply to an earlier
-transmitted message, then the reply is sent back to the filehandle that
-is waiting for it. In addition the CEC framework will process it.
-
-If the message is not a reply, then the CEC framework will process it
-first. If there is no follower, then the message is just discarded and a
-feature abort is sent back to the initiator if the framework couldn't
-process it. If there is a follower, then the message is passed on to the
-follower who will use :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>` to dequeue
-the new message. The framework expects the follower to make the right
-decisions.
-
-The CEC framework will process core messages unless requested otherwise
-by the follower. The follower can enable the passthrough mode. In that
-case, the CEC framework will pass on most core messages without
-processing them and the follower will have to implement those messages.
-There are some messages that the core will always process, regardless of
-the passthrough mode. See :ref:`cec-core-processing` for details.
-
-If there is no initiator, then any CEC filehandle can use
-:ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. If there is an exclusive
-initiator then only that initiator can call
-:ref:`CEC_TRANSMIT`. The follower can of course
-always call :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`.
-
-Available initiator modes are:
-
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
-
-.. _cec-mode-initiator_e:
-
-.. flat-table:: Initiator Modes
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 16
-
-    * .. _`CEC-MODE-NO-INITIATOR`:
-
-      - ``CEC_MODE_NO_INITIATOR``
-      - 0x0
-      - This is not an initiator, i.e. it cannot transmit CEC messages or
-	make any other changes to the CEC adapter.
-    * .. _`CEC-MODE-INITIATOR`:
-
-      - ``CEC_MODE_INITIATOR``
-      - 0x1
-      - This is an initiator (the default when the device is opened) and
-	it can transmit CEC messages and make changes to the CEC adapter,
-	unless there is an exclusive initiator.
-    * .. _`CEC-MODE-EXCL-INITIATOR`:
-
-      - ``CEC_MODE_EXCL_INITIATOR``
-      - 0x2
-      - This is an exclusive initiator and this file descriptor is the
-	only one that can transmit CEC messages and make changes to the
-	CEC adapter. If someone else is already the exclusive initiator
-	then an attempt to become one will return the ``EBUSY`` error code
-	error.
-
-
-Available follower modes are:
-
-.. tabularcolumns:: |p{6.6cm}|p{0.9cm}|p{10.0cm}|
-
-.. _cec-mode-follower_e:
-
-.. cssclass:: longtable
-
-.. flat-table:: Follower Modes
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 16
-
-    * .. _`CEC-MODE-NO-FOLLOWER`:
-
-      - ``CEC_MODE_NO_FOLLOWER``
-      - 0x00
-      - This is not a follower (the default when the device is opened).
-    * .. _`CEC-MODE-FOLLOWER`:
-
-      - ``CEC_MODE_FOLLOWER``
-      - 0x10
-      - This is a follower and it will receive CEC messages unless there
-	is an exclusive follower. You cannot become a follower if
-	:ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`
-	was specified, the ``EINVAL`` error code is returned in that case.
-    * .. _`CEC-MODE-EXCL-FOLLOWER`:
-
-      - ``CEC_MODE_EXCL_FOLLOWER``
-      - 0x20
-      - This is an exclusive follower and only this file descriptor will
-	receive CEC messages for processing. If someone else is already
-	the exclusive follower then an attempt to become one will return
-	the ``EBUSY`` error code. You cannot become a follower if
-	:ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`
-	was specified, the ``EINVAL`` error code is returned in that case.
-    * .. _`CEC-MODE-EXCL-FOLLOWER-PASSTHRU`:
-
-      - ``CEC_MODE_EXCL_FOLLOWER_PASSTHRU``
-      - 0x30
-      - This is an exclusive follower and only this file descriptor will
-	receive CEC messages for processing. In addition it will put the
-	CEC device into passthrough mode, allowing the exclusive follower
-	to handle most core messages instead of relying on the CEC
-	framework for that. If someone else is already the exclusive
-	follower then an attempt to become one will return the ``EBUSY`` error
-	code. You cannot become a follower if :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>`
-	is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` was specified,
-	the ``EINVAL`` error code is returned in that case.
-    * .. _`CEC-MODE-MONITOR-PIN`:
-
-      - ``CEC_MODE_MONITOR_PIN``
-      - 0xd0
-      - Put the file descriptor into pin monitoring mode. Can only be used in
-	combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`,
-	otherwise the ``EINVAL`` error code will be returned.
-	This mode requires that the :ref:`CEC_CAP_MONITOR_PIN <CEC-CAP-MONITOR-PIN>`
-	capability is set, otherwise the ``EINVAL`` error code is returned.
-	While in pin monitoring mode this file descriptor can receive the
-	``CEC_EVENT_PIN_CEC_LOW`` and ``CEC_EVENT_PIN_CEC_HIGH`` events to see the
-	low-level CEC pin transitions. This is very useful for debugging.
-	This mode is only allowed if the process has the ``CAP_NET_ADMIN``
-	capability. If that is not set, then the ``EPERM`` error code is returned.
-    * .. _`CEC-MODE-MONITOR`:
-
-      - ``CEC_MODE_MONITOR``
-      - 0xe0
-      - Put the file descriptor into monitor mode. Can only be used in
-	combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`,
-	otherwise the ``EINVAL`` error code will be returned.
-	In monitor mode all messages this CEC
-	device transmits and all messages it receives (both broadcast
-	messages and directed messages for one its logical addresses) will
-	be reported. This is very useful for debugging. This is only
-	allowed if the process has the ``CAP_NET_ADMIN`` capability. If
-	that is not set, then the ``EPERM`` error code is returned.
-    * .. _`CEC-MODE-MONITOR-ALL`:
-
-      - ``CEC_MODE_MONITOR_ALL``
-      - 0xf0
-      - Put the file descriptor into 'monitor all' mode. Can only be used
-	in combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise
-	the ``EINVAL`` error code will be returned. In 'monitor all' mode all messages
-	this CEC device transmits and all messages it receives, including
-	directed messages for other CEC devices will be reported. This is
-	very useful for debugging, but not all devices support this. This
-	mode requires that the :ref:`CEC_CAP_MONITOR_ALL <CEC-CAP-MONITOR-ALL>` capability is set,
-	otherwise the ``EINVAL`` error code is returned. This is only allowed if
-	the process has the ``CAP_NET_ADMIN`` capability. If that is not
-	set, then the ``EPERM`` error code is returned.
-
-
-Core message processing details:
-
-.. tabularcolumns:: |p{6.6cm}|p{10.9cm}|
-
-.. _cec-core-processing:
-
-.. flat-table:: Core Message Processing
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 8
-
-    * .. _`CEC-MSG-GET-CEC-VERSION`:
-
-      - ``CEC_MSG_GET_CEC_VERSION``
-      - The core will return the CEC version that was set with
-	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`,
-	except when in passthrough mode. In passthrough mode the core
-	does nothing and this message has to be handled by a follower
-	instead.
-    * .. _`CEC-MSG-GIVE-DEVICE-VENDOR-ID`:
-
-      - ``CEC_MSG_GIVE_DEVICE_VENDOR_ID``
-      - The core will return the vendor ID that was set with
-	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`,
-	except when in passthrough mode. In passthrough mode the core
-	does nothing and this message has to be handled by a follower
-	instead.
-    * .. _`CEC-MSG-ABORT`:
-
-      - ``CEC_MSG_ABORT``
-      - The core will return a Feature Abort message with reason
-        'Feature Refused' as per the specification, except when in
-	passthrough mode. In passthrough mode the core does nothing
-	and this message has to be handled by a follower instead.
-    * .. _`CEC-MSG-GIVE-PHYSICAL-ADDR`:
-
-      - ``CEC_MSG_GIVE_PHYSICAL_ADDR``
-      - The core will report the current physical address, except when
-        in passthrough mode. In passthrough mode the core does nothing
-	and this message has to be handled by a follower instead.
-    * .. _`CEC-MSG-GIVE-OSD-NAME`:
-
-      - ``CEC_MSG_GIVE_OSD_NAME``
-      - The core will report the current OSD name that was set with
-	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`,
-	except when in passthrough mode. In passthrough mode the core
-	does nothing and this message has to be handled by a follower
-	instead.
-    * .. _`CEC-MSG-GIVE-FEATURES`:
-
-      - ``CEC_MSG_GIVE_FEATURES``
-      - The core will do nothing if the CEC version is older than 2.0,
-        otherwise it will report the current features that were set with
-	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`,
-	except when in passthrough mode. In passthrough mode the core
-	does nothing (for any CEC version) and this message has to be handled
-	by a follower instead.
-    * .. _`CEC-MSG-USER-CONTROL-PRESSED`:
-
-      - ``CEC_MSG_USER_CONTROL_PRESSED``
-      - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set and if
-        :ref:`CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU <CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU>`
-	is set, then generate a remote control key
-	press. This message is always passed on to the follower(s).
-    * .. _`CEC-MSG-USER-CONTROL-RELEASED`:
-
-      - ``CEC_MSG_USER_CONTROL_RELEASED``
-      - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set and if
-        :ref:`CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU <CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU>`
-        is set, then generate a remote control key
-	release. This message is always passed on to the follower(s).
-    * .. _`CEC-MSG-REPORT-PHYSICAL-ADDR`:
-
-      - ``CEC_MSG_REPORT_PHYSICAL_ADDR``
-      - The CEC framework will make note of the reported physical address
-	and then just pass the message on to the follower(s).
-
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-The :ref:`ioctl CEC_S_MODE <CEC_S_MODE>` can return the following
-error codes:
-
-EINVAL
-    The requested mode is invalid.
-
-EPERM
-    Monitor mode is requested, but the process does have the ``CAP_NET_ADMIN``
-    capability.
-
-EBUSY
-    Someone else is already an exclusive follower or initiator.
diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
deleted file mode 100644
index 4137903d672e..000000000000
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ /dev/null
@@ -1,391 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CEC_TRANSMIT:
-.. _CEC_RECEIVE:
-
-***********************************
-ioctls CEC_RECEIVE and CEC_TRANSMIT
-***********************************
-
-Name
-====
-
-CEC_RECEIVE, CEC_TRANSMIT - Receive or transmit a CEC message
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, CEC_RECEIVE, struct cec_msg \*argp )
-    :name: CEC_RECEIVE
-
-.. c:function:: int ioctl( int fd, CEC_TRANSMIT, struct cec_msg \*argp )
-    :name: CEC_TRANSMIT
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <cec-open>`.
-
-``argp``
-    Pointer to struct cec_msg.
-
-Description
-===========
-
-To receive a CEC message the application has to fill in the
-``timeout`` field of struct :c:type:`cec_msg` and pass it to
-:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
-If the file descriptor is in non-blocking mode and there are no received
-messages pending, then it will return -1 and set errno to the ``EAGAIN``
-error code. If the file descriptor is in blocking mode and ``timeout``
-is non-zero and no message arrived within ``timeout`` milliseconds, then
-it will return -1 and set errno to the ``ETIMEDOUT`` error code.
-
-A received message can be:
-
-1. a message received from another CEC device (the ``sequence`` field will
-   be 0).
-2. the result of an earlier non-blocking transmit (the ``sequence`` field will
-   be non-zero).
-
-To send a CEC message the application has to fill in the struct
-:c:type:`cec_msg` and pass it to :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`.
-The :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` is only available if
-``CEC_CAP_TRANSMIT`` is set. If there is no more room in the transmit
-queue, then it will return -1 and set errno to the ``EBUSY`` error code.
-The transmit queue has enough room for 18 messages (about 1 second worth
-of 2-byte messages). Note that the CEC kernel framework will also reply
-to core messages (see :ref:`cec-core-processing`), so it is not a good
-idea to fully fill up the transmit queue.
-
-If the file descriptor is in non-blocking mode then the transmit will
-return 0 and the result of the transmit will be available via
-:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>` once the transmit has finished
-(including waiting for a reply, if requested).
-
-The ``sequence`` field is filled in for every transmit and this can be
-checked against the received messages to find the corresponding transmit
-result.
-
-Normally calling :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` when the physical
-address is invalid (due to e.g. a disconnect) will return ``ENONET``.
-
-However, the CEC specification allows sending messages from 'Unregistered' to
-'TV' when the physical address is invalid since some TVs pull the hotplug detect
-pin of the HDMI connector low when they go into standby, or when switching to
-another input.
-
-When the hotplug detect pin goes low the EDID disappears, and thus the
-physical address, but the cable is still connected and CEC still works.
-In order to detect/wake up the device it is allowed to send poll and 'Image/Text
-View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
-
-.. tabularcolumns:: |p{1.0cm}|p{3.5cm}|p{13.0cm}|
-
-.. c:type:: cec_msg
-
-.. cssclass:: longtable
-
-.. flat-table:: struct cec_msg
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 16
-
-    * - __u64
-      - ``tx_ts``
-      - Timestamp in ns of when the last byte of the message was transmitted.
-	The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
-	the same clock from userspace use :c:func:`clock_gettime`.
-    * - __u64
-      - ``rx_ts``
-      - Timestamp in ns of when the last byte of the message was received.
-	The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
-	the same clock from userspace use :c:func:`clock_gettime`.
-    * - __u32
-      - ``len``
-      - The length of the message. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in
-	by the application. The driver will fill this in for
-	:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be
-	filled in by the driver with the length of the reply message if ``reply`` was set.
-    * - __u32
-      - ``timeout``
-      - The timeout in milliseconds. This is the time the device will wait
-	for a message to be received before timing out. If it is set to 0,
-	then it will wait indefinitely when it is called by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
-	If it is 0 and it is called by :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`,
-	then it will be replaced by 1000 if the ``reply`` is non-zero or
-	ignored if ``reply`` is 0.
-    * - __u32
-      - ``sequence``
-      - A non-zero sequence number is automatically assigned by the CEC framework
-	for all transmitted messages. It is used by the CEC framework when it queues
-	the transmit result (when transmit was called in non-blocking mode). This
-	allows the application to associate the received message with the original
-	transmit.
-    * - __u32
-      - ``flags``
-      - Flags. See :ref:`cec-msg-flags` for a list of available flags.
-    * - __u8
-      - ``tx_status``
-      - The status bits of the transmitted message. See
-	:ref:`cec-tx-status` for the possible status values. It is 0 if
-	this message was received, not transmitted.
-    * - __u8
-      - ``msg[16]``
-      - The message payload. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in by the
-	application. The driver will fill this in for :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
-	For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be filled in by the driver with
-	the payload of the reply message if ``timeout`` was set.
-    * - __u8
-      - ``reply``
-      - Wait until this message is replied. If ``reply`` is 0 and the
-	``timeout`` is 0, then don't wait for a reply but return after
-	transmitting the message. Ignored by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
-	The case where ``reply`` is 0 (this is the opcode for the Feature Abort
-	message) and ``timeout`` is non-zero is specifically allowed to make it
-	possible to send a message and wait up to ``timeout`` milliseconds for a
-	Feature Abort reply. In this case ``rx_status`` will either be set
-	to :ref:`CEC_RX_STATUS_TIMEOUT <CEC-RX-STATUS-TIMEOUT>` or
-	:ref:`CEC_RX_STATUS_FEATURE_ABORT <CEC-RX-STATUS-FEATURE-ABORT>`.
-
-	If the transmitter message is ``CEC_MSG_INITIATE_ARC`` then the ``reply``
-	values ``CEC_MSG_REPORT_ARC_INITIATED`` and ``CEC_MSG_REPORT_ARC_TERMINATED``
-	are processed differently: either value will match both possible replies.
-	The reason is that the ``CEC_MSG_INITIATE_ARC`` message is the only CEC
-	message that has two possible replies other than Feature Abort. The
-	``reply`` field will be updated with the actual reply so that it is
-	synchronized with the contents of the received message.
-    * - __u8
-      - ``rx_status``
-      - The status bits of the received message. See
-	:ref:`cec-rx-status` for the possible status values. It is 0 if
-	this message was transmitted, not received, unless this is the
-	reply to a transmitted message. In that case both ``rx_status``
-	and ``tx_status`` are set.
-    * - __u8
-      - ``tx_status``
-      - The status bits of the transmitted message. See
-	:ref:`cec-tx-status` for the possible status values. It is 0 if
-	this message was received, not transmitted.
-    * - __u8
-      - ``tx_arb_lost_cnt``
-      - A counter of the number of transmit attempts that resulted in the
-	Arbitration Lost error. This is only set if the hardware supports
-	this, otherwise it is always 0. This counter is only valid if the
-	:ref:`CEC_TX_STATUS_ARB_LOST <CEC-TX-STATUS-ARB-LOST>` status bit is set.
-    * - __u8
-      - ``tx_nack_cnt``
-      - A counter of the number of transmit attempts that resulted in the
-	Not Acknowledged error. This is only set if the hardware supports
-	this, otherwise it is always 0. This counter is only valid if the
-	:ref:`CEC_TX_STATUS_NACK <CEC-TX-STATUS-NACK>` status bit is set.
-    * - __u8
-      - ``tx_low_drive_cnt``
-      - A counter of the number of transmit attempts that resulted in the
-	Arbitration Lost error. This is only set if the hardware supports
-	this, otherwise it is always 0. This counter is only valid if the
-	:ref:`CEC_TX_STATUS_LOW_DRIVE <CEC-TX-STATUS-LOW-DRIVE>` status bit is set.
-    * - __u8
-      - ``tx_error_cnt``
-      - A counter of the number of transmit errors other than Arbitration
-	Lost or Not Acknowledged. This is only set if the hardware
-	supports this, otherwise it is always 0. This counter is only
-	valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set.
-
-
-.. tabularcolumns:: |p{6.2cm}|p{1.0cm}|p{10.3cm}|
-
-.. _cec-msg-flags:
-
-.. flat-table:: Flags for struct cec_msg
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * .. _`CEC-MSG-FL-REPLY-TO-FOLLOWERS`:
-
-      - ``CEC_MSG_FL_REPLY_TO_FOLLOWERS``
-      - 1
-      - If a CEC transmit expects a reply, then by default that reply is only sent to
-	the filehandle that called :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. If this
-	flag is set, then the reply is also sent to all followers, if any. If the
-	filehandle that called :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` is also a
-	follower, then that filehandle will receive the reply twice: once as the
-	result of the :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`, and once via
-	:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
-
-    * .. _`CEC-MSG-FL-RAW`:
-
-      - ``CEC_MSG_FL_RAW``
-      - 2
-      - Normally CEC messages are validated before transmitting them. If this
-        flag is set when :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` is called,
-	then no validation takes place and the message is transmitted as-is.
-	This is useful when debugging CEC issues.
-	This flag is only allowed if the process has the ``CAP_SYS_RAWIO``
-	capability. If that is not set, then the ``EPERM`` error code is
-	returned.
-
-
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
-
-.. _cec-tx-status:
-
-.. flat-table:: CEC Transmit Status
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 16
-
-    * .. _`CEC-TX-STATUS-OK`:
-
-      - ``CEC_TX_STATUS_OK``
-      - 0x01
-      - The message was transmitted successfully. This is mutually
-	exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES <CEC-TX-STATUS-MAX-RETRIES>`.
-	Other bits can still be set if earlier attempts met with failure before
-	the transmit was eventually successful.
-    * .. _`CEC-TX-STATUS-ARB-LOST`:
-
-      - ``CEC_TX_STATUS_ARB_LOST``
-      - 0x02
-      - CEC line arbitration was lost, i.e. another transmit started at the
-        same time with a higher priority. Optional status, not all hardware
-	can detect this error condition.
-    * .. _`CEC-TX-STATUS-NACK`:
-
-      - ``CEC_TX_STATUS_NACK``
-      - 0x04
-      - Message was not acknowledged. Note that some hardware cannot tell apart
-        a 'Not Acknowledged' status from other error conditions, i.e. the result
-	of a transmit is just OK or FAIL. In that case this status will be
-	returned when the transmit failed.
-    * .. _`CEC-TX-STATUS-LOW-DRIVE`:
-
-      - ``CEC_TX_STATUS_LOW_DRIVE``
-      - 0x08
-      - Low drive was detected on the CEC bus. This indicates that a
-	follower detected an error on the bus and requests a
-	retransmission. Optional status, not all hardware can detect this
-	error condition.
-    * .. _`CEC-TX-STATUS-ERROR`:
-
-      - ``CEC_TX_STATUS_ERROR``
-      - 0x10
-      - Some error occurred. This is used for any errors that do not fit
-	``CEC_TX_STATUS_ARB_LOST`` or ``CEC_TX_STATUS_LOW_DRIVE``, either because
-	the hardware could not tell which error occurred, or because the hardware
-	tested for other conditions besides those two. Optional status.
-    * .. _`CEC-TX-STATUS-MAX-RETRIES`:
-
-      - ``CEC_TX_STATUS_MAX_RETRIES``
-      - 0x20
-      - The transmit failed after one or more retries. This status bit is
-	mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`.
-	Other bits can still be set to explain which failures were seen.
-    * .. _`CEC-TX-STATUS-ABORTED`:
-
-      - ``CEC_TX_STATUS_ABORTED``
-      - 0x40
-      - The transmit was aborted due to an HDMI disconnect, or the adapter
-        was unconfigured, or a transmit was interrupted, or the driver
-	returned an error when attempting to start a transmit.
-    * .. _`CEC-TX-STATUS-TIMEOUT`:
-
-      - ``CEC_TX_STATUS_TIMEOUT``
-      - 0x80
-      - The transmit timed out. This should not normally happen and this
-	indicates a driver problem.
-
-
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
-
-.. _cec-rx-status:
-
-.. flat-table:: CEC Receive Status
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 16
-
-    * .. _`CEC-RX-STATUS-OK`:
-
-      - ``CEC_RX_STATUS_OK``
-      - 0x01
-      - The message was received successfully.
-    * .. _`CEC-RX-STATUS-TIMEOUT`:
-
-      - ``CEC_RX_STATUS_TIMEOUT``
-      - 0x02
-      - The reply to an earlier transmitted message timed out.
-    * .. _`CEC-RX-STATUS-FEATURE-ABORT`:
-
-      - ``CEC_RX_STATUS_FEATURE_ABORT``
-      - 0x04
-      - The message was received successfully but the reply was
-	``CEC_MSG_FEATURE_ABORT``. This status is only set if this message
-	was the reply to an earlier transmitted message.
-    * .. _`CEC-RX-STATUS-ABORTED`:
-
-      - ``CEC_RX_STATUS_ABORTED``
-      - 0x08
-      - The wait for a reply to an earlier transmitted message was aborted
-        because the HDMI cable was disconnected, the adapter was unconfigured
-	or the :ref:`CEC_TRANSMIT <CEC_RECEIVE>` that waited for a
-	reply was interrupted.
-
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-The :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>` can return the following
-error codes:
-
-EAGAIN
-    No messages are in the receive queue, and the filehandle is in non-blocking mode.
-
-ETIMEDOUT
-    The ``timeout`` was reached while waiting for a message.
-
-ERESTARTSYS
-    The wait for a message was interrupted (e.g. by Ctrl-C).
-
-The :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` can return the following
-error codes:
-
-ENOTTY
-    The ``CEC_CAP_TRANSMIT`` capability wasn't set, so this ioctl is not supported.
-
-EPERM
-    The CEC adapter is not configured, i.e. :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
-    has never been called, or ``CEC_MSG_FL_RAW`` was used from a process that
-    did not have the ``CAP_SYS_RAWIO`` capability.
-
-ENONET
-    The CEC adapter is not configured, i.e. :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
-    was called, but the physical address is invalid so no logical address was claimed.
-    An exception is made in this case for transmits from initiator 0xf ('Unregistered')
-    to destination 0 ('TV'). In that case the transmit will proceed as usual.
-
-EBUSY
-    Another filehandle is in exclusive follower or initiator mode, or the filehandle
-    is in mode ``CEC_MODE_NO_INITIATOR``. This is also returned if the transmit
-    queue is full.
-
-EINVAL
-    The contents of struct :c:type:`cec_msg` is invalid.
-
-ERESTARTSYS
-    The wait for a successful transmit was interrupted (e.g. by Ctrl-C).
diff --git a/Documentation/media/uapi/cec/cec-pin-error-inj.rst b/Documentation/media/uapi/cec/cec-pin-error-inj.rst
deleted file mode 100644
index 725f8b1c9965..000000000000
--- a/Documentation/media/uapi/cec/cec-pin-error-inj.rst
+++ /dev/null
@@ -1,334 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-CEC Pin Framework Error Injection
-=================================
-
-The CEC Pin Framework is a core CEC framework for CEC hardware that only
-has low-level support for the CEC bus. Most hardware today will have
-high-level CEC support where the hardware deals with driving the CEC bus,
-but some older devices aren't that fancy. However, this framework also
-allows you to connect the CEC pin to a GPIO on e.g. a Raspberry Pi and
-you have now made a CEC adapter.
-
-What makes doing this so interesting is that since we have full control
-over the bus it is easy to support error injection. This is ideal to
-test how well CEC adapters can handle error conditions.
-
-Currently only the cec-gpio driver (when the CEC line is directly
-connected to a pull-up GPIO line) and the AllWinner A10/A20 drm driver
-support this framework.
-
-If ``CONFIG_CEC_PIN_ERROR_INJ`` is enabled, then error injection is available
-through debugfs. Specifically, in ``/sys/kernel/debug/cec/cecX/`` there is
-now an ``error-inj`` file.
-
-.. note::
-
-    The error injection commands are not a stable ABI and may change in the
-    future.
-
-With ``cat error-inj`` you can see both the possible commands and the current
-error injection status::
-
-	$ cat /sys/kernel/debug/cec/cec0/error-inj
-	# Clear error injections:
-	#   clear          clear all rx and tx error injections
-	#   rx-clear       clear all rx error injections
-	#   tx-clear       clear all tx error injections
-	#   <op> clear     clear all rx and tx error injections for <op>
-	#   <op> rx-clear  clear all rx error injections for <op>
-	#   <op> tx-clear  clear all tx error injections for <op>
-	#
-	# RX error injection:
-	#   <op>[,<mode>] rx-nack              NACK the message instead of sending an ACK
-	#   <op>[,<mode>] rx-low-drive <bit>   force a low-drive condition at this bit position
-	#   <op>[,<mode>] rx-add-byte          add a spurious byte to the received CEC message
-	#   <op>[,<mode>] rx-remove-byte       remove the last byte from the received CEC message
-	#   <op>[,<mode>] rx-arb-lost <poll>   generate a POLL message to trigger an arbitration lost
-	#
-	# TX error injection settings:
-	#   tx-ignore-nack-until-eom           ignore early NACKs until EOM
-	#   tx-custom-low-usecs <usecs>        define the 'low' time for the custom pulse
-	#   tx-custom-high-usecs <usecs>       define the 'high' time for the custom pulse
-	#   tx-custom-pulse                    transmit the custom pulse once the bus is idle
-	#
-	# TX error injection:
-	#   <op>[,<mode>] tx-no-eom            don't set the EOM bit
-	#   <op>[,<mode>] tx-early-eom         set the EOM bit one byte too soon
-	#   <op>[,<mode>] tx-add-bytes <num>   append <num> (1-255) spurious bytes to the message
-	#   <op>[,<mode>] tx-remove-byte       drop the last byte from the message
-	#   <op>[,<mode>] tx-short-bit <bit>   make this bit shorter than allowed
-	#   <op>[,<mode>] tx-long-bit <bit>    make this bit longer than allowed
-	#   <op>[,<mode>] tx-custom-bit <bit>  send the custom pulse instead of this bit
-	#   <op>[,<mode>] tx-short-start       send a start pulse that's too short
-	#   <op>[,<mode>] tx-long-start        send a start pulse that's too long
-	#   <op>[,<mode>] tx-custom-start      send the custom pulse instead of the start pulse
-	#   <op>[,<mode>] tx-last-bit <bit>    stop sending after this bit
-	#   <op>[,<mode>] tx-low-drive <bit>   force a low-drive condition at this bit position
-	#
-	# <op>       CEC message opcode (0-255) or 'any'
-	# <mode>     'once' (default), 'always', 'toggle' or 'off'
-	# <bit>      CEC message bit (0-159)
-	#            10 bits per 'byte': bits 0-7: data, bit 8: EOM, bit 9: ACK
-	# <poll>     CEC poll message used to test arbitration lost (0x00-0xff, default 0x0f)
-	# <usecs>    microseconds (0-10000000, default 1000)
-
-	clear
-
-You can write error injection commands to ``error-inj`` using
-``echo 'cmd' >error-inj`` or ``cat cmd.txt >error-inj``. The ``cat error-inj``
-output contains the current error commands. You can save the output to a file
-and use it as an input to ``error-inj`` later.
-
-Basic Syntax
-------------
-
-Leading spaces/tabs are ignored. If the next character is a ``#`` or the end
-of the line was reached, then the whole line is ignored. Otherwise a command
-is expected.
-
-The error injection commands fall in two main groups: those relating to
-receiving CEC messages and those relating to transmitting CEC messages. In
-addition, there are commands to clear existing error injection commands and
-to create custom pulses on the CEC bus.
-
-Most error injection commands can be executed for specific CEC opcodes or for
-all opcodes (``any``). Each command also has a 'mode' which can be ``off``
-(can be used to turn off an existing error injection command), ``once``
-(the default) which will trigger the error injection only once for the next
-received or transmitted message, ``always`` to always trigger the error
-injection and ``toggle`` to toggle the error injection on or off for every
-transmit or receive.
-
-So '``any rx-nack``' will NACK the next received CEC message,
-'``any,always rx-nack``' will NACK all received CEC messages and
-'``0x82,toggle rx-nack``' will only NACK if an Active Source message was
-received and do that only for every other received message.
-
-After an error was injected with mode ``once`` the error injection command
-is cleared automatically, so ``once`` is a one-time deal.
-
-All combinations of ``<op>`` and error injection commands can co-exist. So
-this is fine::
-
-	0x9e tx-add-bytes 1
-	0x9e tx-early-eom
-	0x9f tx-add-bytes 2
-	any rx-nack
-
-All four error injection commands will be active simultaneously.
-
-However, if the same ``<op>`` and command combination is specified,
-but with different arguments::
-
-	0x9e tx-add-bytes 1
-	0x9e tx-add-bytes 2
-
-Then the second will overwrite the first.
-
-Clear Error Injections
-----------------------
-
-``clear``
-    Clear all error injections.
-
-``rx-clear``
-    Clear all receive error injections
-
-``tx-clear``
-    Clear all transmit error injections
-
-``<op> clear``
-    Clear all error injections for the given opcode.
-
-``<op> rx-clear``
-    Clear all receive error injections for the given opcode.
-
-``<op> tx-clear``
-    Clear all transmit error injections for the given opcode.
-
-Receive Messages
-----------------
-
-``<op>[,<mode>] rx-nack``
-    NACK broadcast messages and messages directed to this CEC adapter.
-    Every byte of the message will be NACKed in case the transmitter
-    keeps transmitting after the first byte was NACKed.
-
-``<op>[,<mode>] rx-low-drive <bit>``
-    Force a Low Drive condition at this bit position. If <op> specifies
-    a specific CEC opcode then the bit position must be at least 18,
-    otherwise the opcode hasn't been received yet. This tests if the
-    transmitter can handle the Low Drive condition correctly and reports
-    the error correctly. Note that a Low Drive in the first 4 bits can also
-    be interpreted as an Arbitration Lost condition by the transmitter.
-    This is implementation dependent.
-
-``<op>[,<mode>] rx-add-byte``
-    Add a spurious 0x55 byte to the received CEC message, provided
-    the message was 15 bytes long or less. This is useful to test
-    the high-level protocol since spurious bytes should be ignored.
-
-``<op>[,<mode>] rx-remove-byte``
-    Remove the last byte from the received CEC message, provided it
-    was at least 2 bytes long. This is useful to test the high-level
-    protocol since messages that are too short should be ignored.
-
-``<op>[,<mode>] rx-arb-lost <poll>``
-    Generate a POLL message to trigger an Arbitration Lost condition.
-    This command is only allowed for ``<op>`` values of ``next`` or ``all``.
-    As soon as a start bit has been received the CEC adapter will switch
-    to transmit mode and it will transmit a POLL message. By default this is
-    0x0f, but it can also be specified explicitly via the ``<poll>`` argument.
-
-    This command can be used to test the Arbitration Lost condition in
-    the remote CEC transmitter. Arbitration happens when two CEC adapters
-    start sending a message at the same time. In that case the initiator
-    with the most leading zeroes wins and the other transmitter has to
-    stop transmitting ('Arbitration Lost'). This is very hard to test,
-    except by using this error injection command.
-
-    This does not work if the remote CEC transmitter has logical address
-    0 ('TV') since that will always win.
-
-Transmit Messages
------------------
-
-``tx-ignore-nack-until-eom``
-    This setting changes the behavior of transmitting CEC messages. Normally
-    as soon as the receiver NACKs a byte the transmit will stop, but the
-    specification also allows that the full message is transmitted and only
-    at the end will the transmitter look at the ACK bit. This is not
-    recommended behavior since there is no point in keeping the CEC bus busy
-    for longer than is strictly needed. Especially given how slow the bus is.
-
-    This setting can be used to test how well a receiver deals with
-    transmitters that ignore NACKs until the very end of the message.
-
-``<op>[,<mode>] tx-no-eom``
-    Don't set the EOM bit. Normally the last byte of the message has the EOM
-    (End-Of-Message) bit set. With this command the transmit will just stop
-    without ever sending an EOM. This can be used to test how a receiver
-    handles this case. Normally receivers have a time-out after which
-    they will go back to the Idle state.
-
-``<op>[,<mode>] tx-early-eom``
-    Set the EOM bit one byte too soon. This obviously only works for messages
-    of two bytes or more. The EOM bit will be set for the second-to-last byte
-    and not for the final byte. The receiver should ignore the last byte in
-    this case. Since the resulting message is likely to be too short for this
-    same reason the whole message is typically ignored. The receiver should be
-    in Idle state after the last byte was transmitted.
-
-``<op>[,<mode>] tx-add-bytes <num>``
-    Append ``<num>`` (1-255) spurious bytes to the message. The extra bytes
-    have the value of the byte position in the message. So if you transmit a
-    two byte message (e.g. a Get CEC Version message) and add 2 bytes, then
-    the full message received by the remote CEC adapter is
-    ``0x40 0x9f 0x02 0x03``.
-
-    This command can be used to test buffer overflows in the receiver. E.g.
-    what does it do when it receives more than the maximum message size of 16
-    bytes.
-
-``<op>[,<mode>] tx-remove-byte``
-    Drop the last byte from the message, provided the message is at least
-    two bytes long. The receiver should ignore messages that are too short.
-
-``<op>[,<mode>] tx-short-bit <bit>``
-    Make this bit period shorter than allowed. The bit position cannot be
-    an Ack bit.  If <op> specifies a specific CEC opcode then the bit position
-    must be at least 18, otherwise the opcode hasn't been received yet.
-    Normally the period of a data bit is between 2.05 and 2.75 milliseconds.
-    With this command the period of this bit is 1.8 milliseconds, this is
-    done by reducing the time the CEC bus is high. This bit period is less
-    than is allowed and the receiver should respond with a Low Drive
-    condition.
-
-    This command is ignored for 0 bits in bit positions 0 to 3. This is
-    because the receiver also looks for an Arbitration Lost condition in
-    those first four bits and it is undefined what will happen if it
-    sees a too-short 0 bit.
-
-``<op>[,<mode>] tx-long-bit <bit>``
-    Make this bit period longer than is valid. The bit position cannot be
-    an Ack bit.  If <op> specifies a specific CEC opcode then the bit position
-    must be at least 18, otherwise the opcode hasn't been received yet.
-    Normally the period of a data bit is between 2.05 and 2.75 milliseconds.
-    With this command the period of this bit is 2.9 milliseconds, this is
-    done by increasing the time the CEC bus is high.
-
-    Even though this bit period is longer than is valid it is undefined what
-    a receiver will do. It might just accept it, or it might time out and
-    return to Idle state. Unfortunately the CEC specification is silent about
-    this.
-
-    This command is ignored for 0 bits in bit positions 0 to 3. This is
-    because the receiver also looks for an Arbitration Lost condition in
-    those first four bits and it is undefined what will happen if it
-    sees a too-long 0 bit.
-
-``<op>[,<mode>] tx-short-start``
-    Make this start bit period shorter than allowed. Normally the period of
-    a start bit is between 4.3 and 4.7 milliseconds. With this command the
-    period of the start bit is 4.1 milliseconds, this is done by reducing
-    the time the CEC bus is high. This start bit period is less than is
-    allowed and the receiver should return to Idle state when this is detected.
-
-``<op>[,<mode>] tx-long-start``
-    Make this start bit period longer than is valid. Normally the period of
-    a start bit is between 4.3 and 4.7 milliseconds. With this command the
-    period of the start bit is 5 milliseconds, this is done by increasing
-    the time the CEC bus is high. This start bit period is more than is
-    valid and the receiver should return to Idle state when this is detected.
-
-    Even though this start bit period is longer than is valid it is undefined
-    what a receiver will do. It might just accept it, or it might time out and
-    return to Idle state. Unfortunately the CEC specification is silent about
-    this.
-
-``<op>[,<mode>] tx-last-bit <bit>``
-    Just stop transmitting after this bit.  If <op> specifies a specific CEC
-    opcode then the bit position must be at least 18, otherwise the opcode
-    hasn't been received yet. This command can be used to test how the receiver
-    reacts when a message just suddenly stops. It should time out and go back
-    to Idle state.
-
-``<op>[,<mode>] tx-low-drive <bit>``
-    Force a Low Drive condition at this bit position. If <op> specifies a
-    specific CEC opcode then the bit position must be at least 18, otherwise
-    the opcode hasn't been received yet. This can be used to test how the
-    receiver handles Low Drive conditions. Note that if this happens at bit
-    positions 0-3 the receiver can interpret this as an Arbitration Lost
-    condition. This is implementation dependent.
-
-Custom Pulses
--------------
-
-``tx-custom-low-usecs <usecs>``
-    This defines the duration in microseconds that the custom pulse pulls
-    the CEC line low. The default is 1000 microseconds.
-
-``tx-custom-high-usecs <usecs>``
-    This defines the duration in microseconds that the custom pulse keeps the
-    CEC line high (unless another CEC adapter pulls it low in that time).
-    The default is 1000 microseconds. The total period of the custom pulse is
-    ``tx-custom-low-usecs + tx-custom-high-usecs``.
-
-``<op>[,<mode>] tx-custom-bit <bit>``
-    Send the custom bit instead of a regular data bit. The bit position cannot
-    be an Ack bit.  If <op> specifies a specific CEC opcode then the bit
-    position must be at least 18, otherwise the opcode hasn't been received yet.
-
-``<op>[,<mode>] tx-custom-start``
-    Send the custom bit instead of a regular start bit.
-
-``tx-custom-pulse``
-    Transmit a single custom pulse as soon as the CEC bus is idle.
diff --git a/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst b/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst
deleted file mode 100644
index ee2ee74dafa3..000000000000
--- a/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst
+++ /dev/null
@@ -1,66 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_BILINGUAL_CHANNEL_SELECT:
-
-==============================
-AUDIO_BILINGUAL_CHANNEL_SELECT
-==============================
-
-Name
-----
-
-AUDIO_BILINGUAL_CHANNEL_SELECT
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, AUDIO_BILINGUAL_CHANNEL_SELECT, struct *audio_channel_select)
-    :name: AUDIO_BILINGUAL_CHANNEL_SELECT
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  audio_channel_select_t ch
-
-       -  Select the output format of the audio (mono left/right, stereo).
-
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. It has been replaced
-by the V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` control
-for MPEG decoders controlled through V4L2.
-
-This ioctl call asks the Audio Device to select the requested channel
-for bilingual streams if possible.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-channel-select.rst b/Documentation/media/uapi/dvb/audio-channel-select.rst
deleted file mode 100644
index ebb2f121c4c8..000000000000
--- a/Documentation/media/uapi/dvb/audio-channel-select.rst
+++ /dev/null
@@ -1,66 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_CHANNEL_SELECT:
-
-====================
-AUDIO_CHANNEL_SELECT
-====================
-
-Name
-----
-
-AUDIO_CHANNEL_SELECT
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, AUDIO_CHANNEL_SELECT, struct *audio_channel_select)
-    :name: AUDIO_CHANNEL_SELECT
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  audio_channel_select_t ch
-
-       -  Select the output format of the audio (mono left/right, stereo).
-
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead.
-
-This ioctl call asks the Audio Device to select the requested channel if
-possible.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-clear-buffer.rst b/Documentation/media/uapi/dvb/audio-clear-buffer.rst
deleted file mode 100644
index c5b62cde18c8..000000000000
--- a/Documentation/media/uapi/dvb/audio-clear-buffer.rst
+++ /dev/null
@@ -1,55 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_CLEAR_BUFFER:
-
-==================
-AUDIO_CLEAR_BUFFER
-==================
-
-Name
-----
-
-AUDIO_CLEAR_BUFFER
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int  ioctl(int fd, AUDIO_CLEAR_BUFFER)
-    :name: AUDIO_CLEAR_BUFFER
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-Description
------------
-
-This ioctl call asks the Audio Device to clear all software and hardware
-buffers of the audio decoder device.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-continue.rst b/Documentation/media/uapi/dvb/audio-continue.rst
deleted file mode 100644
index 6bdc99e39e20..000000000000
--- a/Documentation/media/uapi/dvb/audio-continue.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_CONTINUE:
-
-==============
-AUDIO_CONTINUE
-==============
-
-Name
-----
-
-AUDIO_CONTINUE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int  ioctl(int fd, AUDIO_CONTINUE)
-    :name: AUDIO_CONTINUE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-Description
------------
-
-This ioctl restarts the decoding and playing process previously paused
-with AUDIO_PAUSE command.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-fclose.rst b/Documentation/media/uapi/dvb/audio-fclose.rst
deleted file mode 100644
index 1e4ad7a0325d..000000000000
--- a/Documentation/media/uapi/dvb/audio-fclose.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _audio_fclose:
-
-========================
-Digital TV audio close()
-========================
-
-Name
-----
-
-Digital TV audio close()
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int close(int fd)
-    :name: dvb-audio-close
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-
-Description
------------
-
-This system call closes a previously opened audio device.
-
-
-Return Value
-------------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EBADF``
-
-       -  fd is not a valid open file descriptor.
diff --git a/Documentation/media/uapi/dvb/audio-fopen.rst b/Documentation/media/uapi/dvb/audio-fopen.rst
deleted file mode 100644
index 2cf4d83661f4..000000000000
--- a/Documentation/media/uapi/dvb/audio-fopen.rst
+++ /dev/null
@@ -1,115 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _audio_fopen:
-
-=======================
-Digital TV audio open()
-=======================
-
-Name
-----
-
-Digital TV audio open()
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int open(const char *deviceName, int flags)
-    :name: dvb-audio-open
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  const char \*deviceName
-
-       -  Name of specific audio device.
-
-    -  .. row 2
-
-       -  int flags
-
-       -  A bit-wise OR of the following flags:
-
-    -  .. row 3
-
-       -
-       -  O_RDONLY read-only access
-
-    -  .. row 4
-
-       -
-       -  O_RDWR read/write access
-
-    -  .. row 5
-
-       -
-       -  O_NONBLOCK open in non-blocking mode
-
-    -  .. row 6
-
-       -
-       -  (blocking mode is the default)
-
-
-Description
------------
-
-This system call opens a named audio device (e.g.
-/dev/dvb/adapter0/audio0) for subsequent use. When an open() call has
-succeeded, the device will be ready for use. The significance of
-blocking or non-blocking mode is described in the documentation for
-functions where there is a difference. It does not affect the semantics
-of the open() call itself. A device opened in blocking mode can later be
-put into non-blocking mode (and vice versa) using the F_SETFL command
-of the fcntl system call. This is a standard system call, documented in
-the Linux manual page for fcntl. Only one user can open the Audio Device
-in O_RDWR mode. All other attempts to open the device in this mode will
-fail, and an error code will be returned. If the Audio Device is opened
-in O_RDONLY mode, the only ioctl call that can be used is
-AUDIO_GET_STATUS. All other call will return with an error code.
-
-
-Return Value
-------------
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``ENODEV``
-
-       -  Device driver not loaded/available.
-
-    -  .. row 2
-
-       -  ``EBUSY``
-
-       -  Device or resource busy.
-
-    -  .. row 3
-
-       -  ``EINVAL``
-
-       -  Invalid argument.
diff --git a/Documentation/media/uapi/dvb/audio-fwrite.rst b/Documentation/media/uapi/dvb/audio-fwrite.rst
deleted file mode 100644
index 6dc6bf6cbbc7..000000000000
--- a/Documentation/media/uapi/dvb/audio-fwrite.rst
+++ /dev/null
@@ -1,91 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _audio_fwrite:
-
-=========================
-Digital TV audio write()
-=========================
-
-Name
-----
-
-Digital TV audio write()
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: size_t write(int fd, const void *buf, size_t count)
-    :name: dvb-audio-write
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  void \*buf
-
-       -  Pointer to the buffer containing the PES data.
-
-    -  .. row 3
-
-       -  size_t count
-
-       -  Size of buf.
-
-
-Description
------------
-
-This system call can only be used if AUDIO_SOURCE_MEMORY is selected
-in the ioctl call AUDIO_SELECT_SOURCE. The data provided shall be in
-PES format. If O_NONBLOCK is not specified the function will block
-until buffer space is available. The amount of data to be transferred is
-implied by count.
-
-
-Return Value
-------------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EPERM``
-
-       -  Mode AUDIO_SOURCE_MEMORY not selected.
-
-    -  .. row 2
-
-       -  ``ENOMEM``
-
-       -  Attempted to write more data than the internal buffer can hold.
-
-    -  .. row 3
-
-       -  ``EBADF``
-
-       -  fd is not a valid open file descriptor.
diff --git a/Documentation/media/uapi/dvb/audio-get-capabilities.rst b/Documentation/media/uapi/dvb/audio-get-capabilities.rst
deleted file mode 100644
index 4f1ec47e8ac2..000000000000
--- a/Documentation/media/uapi/dvb/audio-get-capabilities.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_GET_CAPABILITIES:
-
-======================
-AUDIO_GET_CAPABILITIES
-======================
-
-Name
-----
-
-AUDIO_GET_CAPABILITIES
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, AUDIO_GET_CAPABILITIES, unsigned int *cap)
-    :name: AUDIO_GET_CAPABILITIES
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  unsigned int \*cap
-
-       -  Returns a bit array of supported sound formats.
-
-
-Description
------------
-
-This ioctl call asks the Audio Device to tell us about the decoding
-capabilities of the audio hardware.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-get-status.rst b/Documentation/media/uapi/dvb/audio-get-status.rst
deleted file mode 100644
index 30e4dd7fce6d..000000000000
--- a/Documentation/media/uapi/dvb/audio-get-status.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_GET_STATUS:
-
-================
-AUDIO_GET_STATUS
-================
-
-Name
-----
-
-AUDIO_GET_STATUS
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, AUDIO_GET_STATUS, struct audio_status *status)
-    :name: AUDIO_GET_STATUS
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  struct audio_status \*status
-
-       -  Returns the current state of Audio Device.
-
-
-Description
------------
-
-This ioctl call asks the Audio Device to return the current state of the
-Audio Device.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-pause.rst b/Documentation/media/uapi/dvb/audio-pause.rst
deleted file mode 100644
index 4567ecd9e0a3..000000000000
--- a/Documentation/media/uapi/dvb/audio-pause.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_PAUSE:
-
-===========
-AUDIO_PAUSE
-===========
-
-Name
-----
-
-AUDIO_PAUSE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int  ioctl(int fd, AUDIO_PAUSE)
-    :name: AUDIO_PAUSE
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-
-Description
------------
-
-This ioctl call suspends the audio stream being played. Decoding and
-playing are paused. It is then possible to restart again decoding and
-playing process of the audio stream using AUDIO_CONTINUE command.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-play.rst b/Documentation/media/uapi/dvb/audio-play.rst
deleted file mode 100644
index 17acd4c411b8..000000000000
--- a/Documentation/media/uapi/dvb/audio-play.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_PLAY:
-
-==========
-AUDIO_PLAY
-==========
-
-Name
-----
-
-AUDIO_PLAY
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int  ioctl(int fd, AUDIO_PLAY)
-    :name: AUDIO_PLAY
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-Description
------------
-
-This ioctl call asks the Audio Device to start playing an audio stream
-from the selected source.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-select-source.rst b/Documentation/media/uapi/dvb/audio-select-source.rst
deleted file mode 100644
index c5ed6243b11c..000000000000
--- a/Documentation/media/uapi/dvb/audio-select-source.rst
+++ /dev/null
@@ -1,65 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_SELECT_SOURCE:
-
-===================
-AUDIO_SELECT_SOURCE
-===================
-
-Name
-----
-
-AUDIO_SELECT_SOURCE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, AUDIO_SELECT_SOURCE, struct audio_stream_source *source)
-    :name: AUDIO_SELECT_SOURCE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  audio_stream_source_t source
-
-       -  Indicates the source that shall be used for the Audio stream.
-
-
-Description
------------
-
-This ioctl call informs the audio device which source shall be used for
-the input data. The possible sources are demux or memory. If
-AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device
-through the write command.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-set-av-sync.rst b/Documentation/media/uapi/dvb/audio-set-av-sync.rst
deleted file mode 100644
index c116d105fdea..000000000000
--- a/Documentation/media/uapi/dvb/audio-set-av-sync.rst
+++ /dev/null
@@ -1,67 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_SET_AV_SYNC:
-
-=================
-AUDIO_SET_AV_SYNC
-=================
-
-Name
-----
-
-AUDIO_SET_AV_SYNC
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int  ioctl(int fd, AUDIO_SET_AV_SYNC, boolean state)
-    :name: AUDIO_SET_AV_SYNC
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  boolean state
-
-       -  Tells the Digital TV subsystem if A/V synchronization shall be ON or OFF.
-
-          TRUE: AV-sync ON
-
-          FALSE: AV-sync OFF
-
-
-Description
------------
-
-This ioctl call asks the Audio Device to turn ON or OFF A/V
-synchronization.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst b/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst
deleted file mode 100644
index d68f05d48d12..000000000000
--- a/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst
+++ /dev/null
@@ -1,70 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_SET_BYPASS_MODE:
-
-=====================
-AUDIO_SET_BYPASS_MODE
-=====================
-
-Name
-----
-
-AUDIO_SET_BYPASS_MODE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, AUDIO_SET_BYPASS_MODE, boolean mode)
-    :name: AUDIO_SET_BYPASS_MODE
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  boolean mode
-
-       -  Enables or disables the decoding of the current Audio stream in
-	  the Digital TV subsystem.
-
-          TRUE: Bypass is disabled
-
-          FALSE: Bypass is enabled
-
-
-Description
------------
-
-This ioctl call asks the Audio Device to bypass the Audio decoder and
-forward the stream without decoding. This mode shall be used if streams
-that can’t be handled by the Digital TV system shall be decoded. Dolby
-DigitalTM streams are automatically forwarded by the Digital TV subsystem if
-the hardware can handle it.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-set-id.rst b/Documentation/media/uapi/dvb/audio-set-id.rst
deleted file mode 100644
index aeb6ace6cd1e..000000000000
--- a/Documentation/media/uapi/dvb/audio-set-id.rst
+++ /dev/null
@@ -1,67 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_SET_ID:
-
-============
-AUDIO_SET_ID
-============
-
-Name
-----
-
-AUDIO_SET_ID
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int  ioctl(int fd, AUDIO_SET_ID, int id)
-    :name: AUDIO_SET_ID
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  int id
-
-       -  audio sub-stream id
-
-
-Description
------------
-
-This ioctl selects which sub-stream is to be decoded if a program or
-system stream is sent to the video device. If no audio stream type is
-set the id has to be in [0xC0,0xDF] for MPEG sound, in [0x80,0x87] for
-AC3 and in [0xA0,0xA7] for LPCM. More specifications may follow for
-other stream types. If the stream type is set the id just specifies the
-substream id of the audio stream and only the first 5 bits are
-recognized.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-set-mixer.rst b/Documentation/media/uapi/dvb/audio-set-mixer.rst
deleted file mode 100644
index 60781aa88202..000000000000
--- a/Documentation/media/uapi/dvb/audio-set-mixer.rst
+++ /dev/null
@@ -1,61 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_SET_MIXER:
-
-===============
-AUDIO_SET_MIXER
-===============
-
-Name
-----
-
-AUDIO_SET_MIXER
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, AUDIO_SET_MIXER, struct audio_mixer *mix)
-    :name: AUDIO_SET_MIXER
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  audio_mixer_t \*mix
-
-       -  mixer settings.
-
-
-Description
------------
-
-This ioctl lets you adjust the mixer settings of the audio decoder.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-set-mute.rst b/Documentation/media/uapi/dvb/audio-set-mute.rst
deleted file mode 100644
index 4449f225e48c..000000000000
--- a/Documentation/media/uapi/dvb/audio-set-mute.rst
+++ /dev/null
@@ -1,71 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_SET_MUTE:
-
-==============
-AUDIO_SET_MUTE
-==============
-
-Name
-----
-
-AUDIO_SET_MUTE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int  ioctl(int fd, AUDIO_SET_MUTE, boolean state)
-    :name: AUDIO_SET_MUTE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  boolean state
-
-       -  Indicates if audio device shall mute or not.
-
-          TRUE: Audio Mute
-
-          FALSE: Audio Un-mute
-
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` with the
-``V4L2_DEC_CMD_START_MUTE_AUDIO`` flag instead.
-
-This ioctl call asks the audio device to mute the stream that is
-currently being played.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio-set-streamtype.rst b/Documentation/media/uapi/dvb/audio-set-streamtype.rst
deleted file mode 100644
index d20c34fc7128..000000000000
--- a/Documentation/media/uapi/dvb/audio-set-streamtype.rst
+++ /dev/null
@@ -1,77 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_SET_STREAMTYPE:
-
-====================
-AUDIO_SET_STREAMTYPE
-====================
-
-Name
-----
-
-AUDIO_SET_STREAMTYPE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int  ioctl(fd, AUDIO_SET_STREAMTYPE, int type)
-    :name: AUDIO_SET_STREAMTYPE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -
-
-       -  int type
-
-       -  stream type
-
-
-Description
------------
-
-This ioctl tells the driver which kind of audio stream to expect. This
-is useful if the stream offers several audio sub-streams like LPCM and
-AC3.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EINVAL``
-
-       -  type is not a valid or supported stream type.
diff --git a/Documentation/media/uapi/dvb/audio-stop.rst b/Documentation/media/uapi/dvb/audio-stop.rst
deleted file mode 100644
index 1bba2e50c364..000000000000
--- a/Documentation/media/uapi/dvb/audio-stop.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _AUDIO_STOP:
-
-==========
-AUDIO_STOP
-==========
-
-Name
-----
-
-AUDIO_STOP
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, AUDIO_STOP)
-    :name: AUDIO_STOP
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-
-Description
------------
-
-This ioctl call asks the Audio Device to stop playing the current
-stream.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/audio.rst b/Documentation/media/uapi/dvb/audio.rst
deleted file mode 100644
index ebc18fca76a4..000000000000
--- a/Documentation/media/uapi/dvb/audio.rst
+++ /dev/null
@@ -1,34 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dvb_audio:
-
-#######################
-Digital TV Audio Device
-#######################
-
-The Digital TV audio device controls the MPEG2 audio decoder of the Digital
-TV hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data
-types and and ioctl definitions can be accessed by including
-``linux/dvb/audio.h`` in your application.
-
-Please note that some Digital TV cards don’t have their own MPEG decoder, which
-results in the omission of the audio and video device.
-
-These ioctls were also used by V4L2 to control MPEG decoders implemented
-in V4L2. The use of these ioctls for that purpose has been made obsolete
-and proper V4L2 ioctls or controls have been created to replace that
-functionality.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    audio_data_types
-    audio_function_calls
diff --git a/Documentation/media/uapi/dvb/audio_data_types.rst b/Documentation/media/uapi/dvb/audio_data_types.rst
deleted file mode 100644
index 5b032fe13b9d..000000000000
--- a/Documentation/media/uapi/dvb/audio_data_types.rst
+++ /dev/null
@@ -1,123 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _audio_data_types:
-
-****************
-Audio Data Types
-****************
-
-This section describes the structures, data types and defines used when
-talking to the audio device.
-
-.. c:type:: audio_stream_source
-
-The audio stream source is set through the AUDIO_SELECT_SOURCE call
-and can take the following values, depending on whether we are replaying
-from an internal (demux) or external (user write) source.
-
-
-.. code-block:: c
-
-    typedef enum {
-	AUDIO_SOURCE_DEMUX,
-	AUDIO_SOURCE_MEMORY
-    } audio_stream_source_t;
-
-AUDIO_SOURCE_DEMUX selects the demultiplexer (fed either by the
-frontend or the DVR device) as the source of the video stream. If
-AUDIO_SOURCE_MEMORY is selected the stream comes from the application
-through the ``write()`` system call.
-
-
-.. c:type:: audio_play_state
-
-The following values can be returned by the AUDIO_GET_STATUS call
-representing the state of audio playback.
-
-
-.. code-block:: c
-
-    typedef enum {
-	AUDIO_STOPPED,
-	AUDIO_PLAYING,
-	AUDIO_PAUSED
-    } audio_play_state_t;
-
-
-.. c:type:: audio_channel_select
-
-The audio channel selected via AUDIO_CHANNEL_SELECT is determined by
-the following values.
-
-
-.. code-block:: c
-
-    typedef enum {
-	AUDIO_STEREO,
-	AUDIO_MONO_LEFT,
-	AUDIO_MONO_RIGHT,
-	AUDIO_MONO,
-	AUDIO_STEREO_SWAPPED
-    } audio_channel_select_t;
-
-
-.. c:type:: audio_status
-
-The AUDIO_GET_STATUS call returns the following structure informing
-about various states of the playback operation.
-
-
-.. code-block:: c
-
-    typedef struct audio_status {
-	boolean AV_sync_state;
-	boolean mute_state;
-	audio_play_state_t play_state;
-	audio_stream_source_t stream_source;
-	audio_channel_select_t channel_select;
-	boolean bypass_mode;
-	audio_mixer_t mixer_state;
-    } audio_status_t;
-
-
-.. c:type:: audio_mixer
-
-The following structure is used by the AUDIO_SET_MIXER call to set the
-audio volume.
-
-
-.. code-block:: c
-
-    typedef struct audio_mixer {
-	unsigned int volume_left;
-	unsigned int volume_right;
-    } audio_mixer_t;
-
-
-.. _audio_encodings:
-
-audio encodings
-===============
-
-A call to AUDIO_GET_CAPABILITIES returns an unsigned integer with the
-following bits set according to the hardwares capabilities.
-
-
-.. code-block:: c
-
-     #define AUDIO_CAP_DTS    1
-     #define AUDIO_CAP_LPCM   2
-     #define AUDIO_CAP_MP1    4
-     #define AUDIO_CAP_MP2    8
-     #define AUDIO_CAP_MP3   16
-     #define AUDIO_CAP_AAC   32
-     #define AUDIO_CAP_OGG   64
-     #define AUDIO_CAP_SDDS 128
-     #define AUDIO_CAP_AC3  256
diff --git a/Documentation/media/uapi/dvb/audio_function_calls.rst b/Documentation/media/uapi/dvb/audio_function_calls.rst
deleted file mode 100644
index 5478e78b085e..000000000000
--- a/Documentation/media/uapi/dvb/audio_function_calls.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _audio_function_calls:
-
-********************
-Audio Function Calls
-********************
-
-.. toctree::
-    :maxdepth: 1
-
-    audio-fopen
-    audio-fclose
-    audio-fwrite
-    audio-stop
-    audio-play
-    audio-pause
-    audio-continue
-    audio-select-source
-    audio-set-mute
-    audio-set-av-sync
-    audio-set-bypass-mode
-    audio-channel-select
-    audio-bilingual-channel-select
-    audio-get-status
-    audio-get-capabilities
-    audio-clear-buffer
-    audio-set-id
-    audio-set-mixer
-    audio-set-streamtype
diff --git a/Documentation/media/uapi/dvb/ca-fclose.rst b/Documentation/media/uapi/dvb/ca-fclose.rst
deleted file mode 100644
index e273444ccc67..000000000000
--- a/Documentation/media/uapi/dvb/ca-fclose.rst
+++ /dev/null
@@ -1,50 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _ca_fclose:
-
-=====================
-Digital TV CA close()
-=====================
-
-Name
-----
-
-Digital TV CA close()
-
-
-Synopsis
---------
-
-.. c:function:: int close(int fd)
-    :name: dvb-ca-close
-
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
-
-Description
------------
-
-This system call closes a previously opened CA device.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/ca-fopen.rst b/Documentation/media/uapi/dvb/ca-fopen.rst
deleted file mode 100644
index e11ebeae5693..000000000000
--- a/Documentation/media/uapi/dvb/ca-fopen.rst
+++ /dev/null
@@ -1,84 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _ca_fopen:
-
-====================
-Digital TV CA open()
-====================
-
-Name
-----
-
-Digital TV CA open()
-
-
-Synopsis
---------
-
-.. c:function:: int open(const char *name, int flags)
-    :name: dvb-ca-open
-
-
-Arguments
----------
-
-``name``
-  Name of specific Digital TV CA device.
-
-``flags``
-  A bit-wise OR of the following flags:
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-    -  - ``O_RDONLY``
-       - read-only access
-
-    -  - ``O_RDWR``
-       - read/write access
-
-    -  - ``O_NONBLOCK``
-       - open in non-blocking mode
-         (blocking mode is the default)
-
-
-Description
------------
-
-This system call opens a named ca device (e.g. ``/dev/dvb/adapter?/ca?``)
-for subsequent use.
-
-When an ``open()`` call has succeeded, the device will be ready for use. The
-significance of blocking or non-blocking mode is described in the
-documentation for functions where there is a difference. It does not
-affect the semantics of the ``open()`` call itself. A device opened in
-blocking mode can later be put into non-blocking mode (and vice versa)
-using the ``F_SETFL`` command of the ``fcntl`` system call. This is a
-standard system call, documented in the Linux manual page for fcntl.
-Only one user can open the CA Device in ``O_RDWR`` mode. All other
-attempts to open the device in this mode will fail, and an error code
-will be returned.
-
-
-Return Value
-------------
-
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/ca-get-cap.rst b/Documentation/media/uapi/dvb/ca-get-cap.rst
deleted file mode 100644
index 9e4fb5186373..000000000000
--- a/Documentation/media/uapi/dvb/ca-get-cap.rst
+++ /dev/null
@@ -1,53 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CA_GET_CAP:
-
-==========
-CA_GET_CAP
-==========
-
-Name
-----
-
-CA_GET_CAP
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, CA_GET_CAP, struct ca_caps *caps)
-    :name: CA_GET_CAP
-
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
-
-``caps``
-  Pointer to struct :c:type:`ca_caps`.
-
-Description
------------
-
-Queries the Kernel for information about the available CA and descrambler
-slots, and their types.
-
-Return Value
-------------
-
-On success 0 is returned and :c:type:`ca_caps` is filled.
-
-On error, -1 is returned and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/ca-get-descr-info.rst b/Documentation/media/uapi/dvb/ca-get-descr-info.rst
deleted file mode 100644
index 80ef43a339df..000000000000
--- a/Documentation/media/uapi/dvb/ca-get-descr-info.rst
+++ /dev/null
@@ -1,49 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CA_GET_DESCR_INFO:
-
-=================
-CA_GET_DESCR_INFO
-=================
-
-Name
-----
-
-CA_GET_DESCR_INFO
-
-
-Synopsis
---------
-
-.. c:function:: int  ioctl(fd, CA_GET_DESCR_INFO, struct ca_descr_info *desc)
-    :name: CA_GET_DESCR_INFO
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
-
-``desc``
-  Pointer to struct :c:type:`ca_descr_info`.
-
-Description
------------
-
-Returns information about all descrambler slots.
-
-Return Value
-------------
-
-On success 0 is returned, and :c:type:`ca_descr_info` is filled.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/ca-get-msg.rst b/Documentation/media/uapi/dvb/ca-get-msg.rst
deleted file mode 100644
index bcb7955a0ddc..000000000000
--- a/Documentation/media/uapi/dvb/ca-get-msg.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CA_GET_MSG:
-
-==========
-CA_GET_MSG
-==========
-
-Name
-----
-
-CA_GET_MSG
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, CA_GET_MSG, struct ca_msg *msg)
-    :name: CA_GET_MSG
-
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
-
-``msg``
-  Pointer to struct :c:type:`ca_msg`.
-
-Description
------------
-
-Receives a message via a CI CA module.
-
-.. note::
-
-   Please notice that, on most drivers, this is done by reading from
-   the /dev/adapter?/ca? device node.
-
-
-Return Value
-------------
-
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/ca-get-slot-info.rst b/Documentation/media/uapi/dvb/ca-get-slot-info.rst
deleted file mode 100644
index 1ea5c497f2ea..000000000000
--- a/Documentation/media/uapi/dvb/ca-get-slot-info.rst
+++ /dev/null
@@ -1,64 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CA_GET_SLOT_INFO:
-
-================
-CA_GET_SLOT_INFO
-================
-
-Name
-----
-
-CA_GET_SLOT_INFO
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, CA_GET_SLOT_INFO, struct ca_slot_info *info)
-    :name: CA_GET_SLOT_INFO
-
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <cec-open>`.
-
-``info``
-  Pointer to struct :c:type:`ca_slot_info`.
-
-Description
------------
-
-Returns information about a CA slot identified by
-:c:type:`ca_slot_info`.slot_num.
-
-
-Return Value
-------------
-
-On success 0 is returned, and :c:type:`ca_slot_info` is filled.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-    -  -  ``ENODEV``
-       -  the slot is not available.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/ca-reset.rst b/Documentation/media/uapi/dvb/ca-reset.rst
deleted file mode 100644
index 29fda19984be..000000000000
--- a/Documentation/media/uapi/dvb/ca-reset.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CA_RESET:
-
-========
-CA_RESET
-========
-
-Name
-----
-
-CA_RESET
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, CA_RESET)
-    :name: CA_RESET
-
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <cec-open>`.
-
-Description
------------
-
-Puts the Conditional Access hardware on its initial state. It should
-be called before start using the CA hardware.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/ca-send-msg.rst b/Documentation/media/uapi/dvb/ca-send-msg.rst
deleted file mode 100644
index 5a3c4e8120c4..000000000000
--- a/Documentation/media/uapi/dvb/ca-send-msg.rst
+++ /dev/null
@@ -1,58 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CA_SEND_MSG:
-
-===========
-CA_SEND_MSG
-===========
-
-Name
-----
-
-CA_SEND_MSG
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, CA_SEND_MSG, struct ca_msg *msg)
-    :name: CA_SEND_MSG
-
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <cec-open>`.
-
-``msg``
-  Pointer to struct :c:type:`ca_msg`.
-
-
-Description
------------
-
-Sends a message via a CI CA module.
-
-.. note::
-
-   Please notice that, on most drivers, this is done by writing
-   to the /dev/adapter?/ca? device node.
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/ca-set-descr.rst b/Documentation/media/uapi/dvb/ca-set-descr.rst
deleted file mode 100644
index d36464ba2317..000000000000
--- a/Documentation/media/uapi/dvb/ca-set-descr.rst
+++ /dev/null
@@ -1,53 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _CA_SET_DESCR:
-
-============
-CA_SET_DESCR
-============
-
-Name
-----
-
-CA_SET_DESCR
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, CA_SET_DESCR, struct ca_descr *desc)
-    :name: CA_SET_DESCR
-
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <cec-open>`.
-
-``msg``
-  Pointer to struct :c:type:`ca_descr`.
-
-Description
------------
-
-CA_SET_DESCR is used for feeding descrambler CA slots with descrambling
-keys (referred as control words).
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/ca.rst b/Documentation/media/uapi/dvb/ca.rst
deleted file mode 100644
index 8796512c1378..000000000000
--- a/Documentation/media/uapi/dvb/ca.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dvb_ca:
-
-####################
-Digital TV CA Device
-####################
-
-The Digital TV CA device controls the conditional access hardware. It
-can be accessed through ``/dev/dvb/adapter?/ca?``. Data types and and ioctl
-definitions can be accessed by including ``linux/dvb/ca.h`` in your
-application.
-
-.. note::
-
-   There are three ioctls at this API that aren't documented:
-   :ref:`CA_GET_MSG`, :ref:`CA_SEND_MSG` and :ref:`CA_SET_DESCR`.
-   Documentation for them are welcome.
-
-.. toctree::
-    :maxdepth: 1
-
-    ca_data_types
-    ca_function_calls
diff --git a/Documentation/media/uapi/dvb/ca_data_types.rst b/Documentation/media/uapi/dvb/ca_data_types.rst
deleted file mode 100644
index 834c8ab4c300..000000000000
--- a/Documentation/media/uapi/dvb/ca_data_types.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _ca_data_types:
-
-*************
-CA Data Types
-*************
-
-.. kernel-doc:: include/uapi/linux/dvb/ca.h
diff --git a/Documentation/media/uapi/dvb/ca_function_calls.rst b/Documentation/media/uapi/dvb/ca_function_calls.rst
deleted file mode 100644
index 6985bebd0661..000000000000
--- a/Documentation/media/uapi/dvb/ca_function_calls.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _ca_function_calls:
-
-*****************
-CA Function Calls
-*****************
-
-.. toctree::
-    :maxdepth: 1
-
-    ca-fopen
-    ca-fclose
-    ca-reset
-    ca-get-cap
-    ca-get-slot-info
-    ca-get-descr-info
-    ca-get-msg
-    ca-send-msg
-    ca-set-descr
diff --git a/Documentation/media/uapi/dvb/demux.rst b/Documentation/media/uapi/dvb/demux.rst
deleted file mode 100644
index d8c0ff4015fe..000000000000
--- a/Documentation/media/uapi/dvb/demux.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dvb_demux:
-
-#######################
-Digital TV Demux Device
-#######################
-
-The Digital TV demux device controls the MPEG-TS filters for the
-digital TV. If the driver and hardware supports, those filters are
-implemented at the hardware. Otherwise, the Kernel provides a software
-emulation.
-
-It can be accessed through ``/dev/adapter?/demux?``. Data types and and
-ioctl definitions can be accessed by including ``linux/dvb/dmx.h`` in
-your application.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    dmx_types
-    dmx_fcalls
diff --git a/Documentation/media/uapi/dvb/dmx-add-pid.rst b/Documentation/media/uapi/dvb/dmx-add-pid.rst
deleted file mode 100644
index f483268e4ede..000000000000
--- a/Documentation/media/uapi/dvb/dmx-add-pid.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_ADD_PID:
-
-===========
-DMX_ADD_PID
-===========
-
-Name
-----
-
-DMX_ADD_PID
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, DMX_ADD_PID, __u16 *pid)
-    :name: DMX_ADD_PID
-
-
-Arguments
----------
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
-
-``pid``
-   PID number to be filtered.
-
-
-Description
------------
-
-This ioctl call allows to add multiple PIDs to a transport stream filter
-previously set up with :ref:`DMX_SET_PES_FILTER` and output equal to
-:c:type:`DMX_OUT_TSDEMUX_TAP <dmx_output>`.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-expbuf.rst b/Documentation/media/uapi/dvb/dmx-expbuf.rst
deleted file mode 100644
index d7f0658f3db3..000000000000
--- a/Documentation/media/uapi/dvb/dmx-expbuf.rst
+++ /dev/null
@@ -1,97 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_EXPBUF:
-
-****************
-ioctl DMX_EXPBUF
-****************
-
-Name
-====
-
-DMX_EXPBUF - Export a buffer as a DMABUF file descriptor.
-
-.. warning:: this API is still experimental
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, DMX_EXPBUF, struct dmx_exportbuffer *argp )
-    :name: DMX_EXPBUF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <dmx_fopen>`.
-
-``argp``
-    Pointer to struct :c:type:`dmx_exportbuffer`.
-
-
-Description
-===========
-
-This ioctl is an extension to the memory mapping I/O method.
-It can be used to export a buffer as a DMABUF file at any time after
-buffers have been allocated with the :ref:`DMX_REQBUFS` ioctl.
-
-To export a buffer, applications fill struct :c:type:`dmx_exportbuffer`.
-Applications must set the ``index`` field. Valid index numbers
-range from zero to the number of buffers allocated with :ref:`DMX_REQBUFS`
-(struct :c:type:`dmx_requestbuffers` ``count``) minus one.
-Additional flags may be posted in the ``flags`` field. Refer to a manual
-for open() for details. Currently only O_CLOEXEC, O_RDONLY, O_WRONLY,
-and O_RDWR are supported.
-All other fields must be set to zero. In the
-case of multi-planar API, every plane is exported separately using
-multiple :ref:`DMX_EXPBUF` calls.
-
-After calling :ref:`DMX_EXPBUF` the ``fd`` field will be set by a
-driver, on success. This is a DMABUF file descriptor. The application may
-pass it to other DMABUF-aware devices. It is recommended to close a DMABUF
-file when it is no longer used to allow the associated memory to be reclaimed.
-
-
-Examples
-========
-
-
-.. code-block:: c
-
-    int buffer_export(int v4lfd, enum dmx_buf_type bt, int index, int *dmafd)
-    {
-	struct dmx_exportbuffer expbuf;
-
-	memset(&expbuf, 0, sizeof(expbuf));
-	expbuf.type = bt;
-	expbuf.index = index;
-	if (ioctl(v4lfd, DMX_EXPBUF, &expbuf) == -1) {
-	    perror("DMX_EXPBUF");
-	    return -1;
-	}
-
-	*dmafd = expbuf.fd;
-
-	return 0;
-    }
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    A queue is not in MMAP mode or DMABUF exporting is not supported or
-    ``flags`` or ``index`` fields are invalid.
diff --git a/Documentation/media/uapi/dvb/dmx-fclose.rst b/Documentation/media/uapi/dvb/dmx-fclose.rst
deleted file mode 100644
index 05ff32270274..000000000000
--- a/Documentation/media/uapi/dvb/dmx-fclose.rst
+++ /dev/null
@@ -1,52 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dmx_fclose:
-
-========================
-Digital TV demux close()
-========================
-
-Name
-----
-
-Digital TV demux close()
-
-
-Synopsis
---------
-
-.. c:function:: int close(int fd)
-    :name: dvb-dmx-close
-
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to
-  :c:func:`open() <dvb-dmx-open>`.
-
-Description
------------
-
-This system call deactivates and deallocates a filter that was
-previously allocated via the :c:func:`open() <dvb-dmx-open>` call.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error, -1 is returned and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-fopen.rst b/Documentation/media/uapi/dvb/dmx-fopen.rst
deleted file mode 100644
index 2700a2fad68b..000000000000
--- a/Documentation/media/uapi/dvb/dmx-fopen.rst
+++ /dev/null
@@ -1,98 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dmx_fopen:
-
-=======================
-Digital TV demux open()
-=======================
-
-Name
-----
-
-Digital TV demux open()
-
-
-Synopsis
---------
-
-.. c:function:: int open(const char *deviceName, int flags)
-    :name: dvb-dmx-open
-
-Arguments
----------
-
-``name``
-  Name of specific Digital TV demux device.
-
-``flags``
-  A bit-wise OR of the following flags:
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-    -
-       - ``O_RDONLY``
-       - read-only access
-
-    -
-       - ``O_RDWR``
-       - read/write access
-
-    -
-       - ``O_NONBLOCK``
-       - open in non-blocking mode
-         (blocking mode is the default)
-
-
-Description
------------
-
-This system call, used with a device name of ``/dev/dvb/adapter?/demux?``,
-allocates a new filter and returns a handle which can be used for
-subsequent control of that filter. This call has to be made for each
-filter to be used, i.e. every returned file descriptor is a reference to
-a single filter. ``/dev/dvb/adapter?/dvr?`` is a logical device to be used
-for retrieving Transport Streams for digital video recording. When
-reading from this device a transport stream containing the packets from
-all PES filters set in the corresponding demux device
-(``/dev/dvb/adapter?/demux?``) having the output set to ``DMX_OUT_TS_TAP``.
-A recorded Transport Stream is replayed by writing to this device.
-
-The significance of blocking or non-blocking mode is described in the
-documentation for functions where there is a difference. It does not
-affect the semantics of the ``open()`` call itself. A device opened
-in blocking mode can later be put into non-blocking mode (and vice versa)
-using the ``F_SETFL`` command of the fcntl system call.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-    -  -  ``EMFILE``
-       -  “Too many open files”, i.e. no more filters available.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-fread.rst b/Documentation/media/uapi/dvb/dmx-fread.rst
deleted file mode 100644
index 292fa98f39ff..000000000000
--- a/Documentation/media/uapi/dvb/dmx-fread.rst
+++ /dev/null
@@ -1,87 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dmx_fread:
-
-=======================
-Digital TV demux read()
-=======================
-
-Name
-----
-
-Digital TV demux read()
-
-
-Synopsis
---------
-
-.. c:function:: size_t read(int fd, void *buf, size_t count)
-    :name: dvb-dmx-read
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
-
- ``buf``
-   Buffer to be filled
-
-``count``
-   Max number of bytes to read
-
-Description
------------
-
-This system call returns filtered data, which might be section or Packetized
-Elementary Stream (PES) data. The filtered data is transferred from
-the driver’s internal circular buffer to ``buf``. The maximum amount of data
-to be transferred is implied by count.
-
-.. note::
-
-   if a section filter created with
-   :c:type:`DMX_CHECK_CRC <dmx_sct_filter_params>` flag set,
-   data that fails on CRC check will be silently ignored.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-    -  -  ``EWOULDBLOCK``
-       -  No data to return and ``O_NONBLOCK`` was specified.
-
-    -  -  ``EOVERFLOW``
-       -  The filtered data was not read from the buffer in due time,
-	  resulting in non-read data being lost. The buffer is flushed.
-
-    -  -  ``ETIMEDOUT``
-       -  The section was not loaded within the stated timeout period.
-          See ioctl :ref:`DMX_SET_FILTER` for how to set a timeout.
-
-    -  -  ``EFAULT``
-       -  The driver failed to write to the callers buffer due to an
-          invalid \*buf pointer.
-
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-fwrite.rst b/Documentation/media/uapi/dvb/dmx-fwrite.rst
deleted file mode 100644
index bdd4d4743bd5..000000000000
--- a/Documentation/media/uapi/dvb/dmx-fwrite.rst
+++ /dev/null
@@ -1,79 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dmx_fwrite:
-
-========================
-Digital TV demux write()
-========================
-
-Name
-----
-
-Digital TV demux write()
-
-
-Synopsis
---------
-
-.. c:function:: ssize_t write(int fd, const void *buf, size_t count)
-    :name: dvb-dmx-write
-
-Arguments
----------
-
-``fd``
-  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
-
-``buf``
-     Buffer with data to be written
-
-``count``
-    Number of bytes at the buffer
-
-Description
------------
-
-This system call is only provided by the logical device
-``/dev/dvb/adapter?/dvr?``, associated with the physical demux device that
-provides the actual DVR functionality. It is used for replay of a
-digitally recorded Transport Stream. Matching filters have to be defined
-in the corresponding physical demux device, ``/dev/dvb/adapter?/demux?``.
-The amount of data to be transferred is implied by count.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-    -  -  ``EWOULDBLOCK``
-       -  No data was written. This might happen if ``O_NONBLOCK`` was
-	  specified and there is no more buffer space available (if
-	  ``O_NONBLOCK`` is not specified the function will block until buffer
-	  space is available).
-
-    -  -  ``EBUSY``
-       -  This error code indicates that there are conflicting requests. The
-	  corresponding demux device is setup to receive data from the
-	  front- end. Make sure that these filters are stopped and that the
-	  filters with input set to ``DMX_IN_DVR`` are started.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst
deleted file mode 100644
index fcd3dc06c095..000000000000
--- a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst
+++ /dev/null
@@ -1,71 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_GET_PES_PIDS:
-
-================
-DMX_GET_PES_PIDS
-================
-
-Name
-----
-
-DMX_GET_PES_PIDS
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, DMX_GET_PES_PIDS, __u16 pids[5])
-    :name: DMX_GET_PES_PIDS
-
-Arguments
----------
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
-
-``pids``
-    Array used to store 5 Program IDs.
-
-
-Description
------------
-
-This ioctl allows to query a DVB device to return the first PID used
-by audio, video, textext, subtitle and PCR programs on a given service.
-They're stored as:
-
-=======================	========	=======================================
-PID  element		position	content
-=======================	========	=======================================
-pids[DMX_PES_AUDIO]	0		first audio PID
-pids[DMX_PES_VIDEO]	1		first video PID
-pids[DMX_PES_TELETEXT]	2		first teletext PID
-pids[DMX_PES_SUBTITLE]	3		first subtitle PID
-pids[DMX_PES_PCR]	4		first Program Clock Reference PID
-=======================	========	=======================================
-
-
-.. note::
-
-	A value equal to 0xffff means that the PID was not filled by the
-	Kernel.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-get-stc.rst b/Documentation/media/uapi/dvb/dmx-get-stc.rst
deleted file mode 100644
index 2c81595f470a..000000000000
--- a/Documentation/media/uapi/dvb/dmx-get-stc.rst
+++ /dev/null
@@ -1,73 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_GET_STC:
-
-===========
-DMX_GET_STC
-===========
-
-Name
-----
-
-DMX_GET_STC
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl( int fd, DMX_GET_STC, struct dmx_stc *stc)
-    :name: DMX_GET_STC
-
-Arguments
----------
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
-
-``stc``
-    Pointer to :c:type:`dmx_stc` where the stc data is to be stored.
-
-
-Description
------------
-
-This ioctl call returns the current value of the system time counter
-(which is driven by a PES filter of type :c:type:`DMX_PES_PCR <dmx_ts_pes>`).
-Some hardware supports more than one STC, so you must specify which one by
-setting the :c:type:`num <dmx_stc>` field of stc before the ioctl (range 0...n).
-The result is returned in form of a ratio with a 64 bit numerator
-and a 32 bit denominator, so the real 90kHz STC value is
-``stc->stc / stc->base``.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-    -  .. row 1
-
-       -  ``EINVAL``
-
-       -  Invalid stc number.
-
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-mmap.rst b/Documentation/media/uapi/dvb/dmx-mmap.rst
deleted file mode 100644
index 34bb7766718f..000000000000
--- a/Documentation/media/uapi/dvb/dmx-mmap.rst
+++ /dev/null
@@ -1,125 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dmx-mmap:
-
-*****************
-Digital TV mmap()
-*****************
-
-Name
-====
-
-dmx-mmap - Map device memory into application address space
-
-.. warning:: this API is still experimental
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-    #include <sys/mman.h>
-
-
-.. c:function:: void *mmap( void *start, size_t length, int prot, int flags, int fd, off_t offset )
-    :name: dmx-mmap
-
-Arguments
-=========
-
-``start``
-    Map the buffer to this address in the application's address space.
-    When the ``MAP_FIXED`` flag is specified, ``start`` must be a
-    multiple of the pagesize and mmap will fail when the specified
-    address cannot be used. Use of this option is discouraged;
-    applications should just specify a ``NULL`` pointer here.
-
-``length``
-    Length of the memory area to map. This must be a multiple of the
-    DVB packet length (188, on most drivers).
-
-``prot``
-    The ``prot`` argument describes the desired memory protection.
-    Regardless of the device type and the direction of data exchange it
-    should be set to ``PROT_READ`` | ``PROT_WRITE``, permitting read
-    and write access to image buffers. Drivers should support at least
-    this combination of flags.
-
-``flags``
-    The ``flags`` parameter specifies the type of the mapped object,
-    mapping options and whether modifications made to the mapped copy of
-    the page are private to the process or are to be shared with other
-    references.
-
-    ``MAP_FIXED`` requests that the driver selects no other address than
-    the one specified. If the specified address cannot be used,
-    :ref:`mmap() <dmx-mmap>` will fail. If ``MAP_FIXED`` is specified,
-    ``start`` must be a multiple of the pagesize. Use of this option is
-    discouraged.
-
-    One of the ``MAP_SHARED`` or ``MAP_PRIVATE`` flags must be set.
-    ``MAP_SHARED`` allows applications to share the mapped memory with
-    other (e. g. child-) processes.
-
-    .. note::
-
-       The Linux Digital TV applications should not set the
-       ``MAP_PRIVATE``, ``MAP_DENYWRITE``, ``MAP_EXECUTABLE`` or ``MAP_ANON``
-       flags.
-
-``fd``
-    File descriptor returned by :ref:`open() <dmx_fopen>`.
-
-``offset``
-    Offset of the buffer in device memory, as returned by
-    :ref:`DMX_QUERYBUF` ioctl.
-
-
-Description
-===========
-
-The :ref:`mmap() <dmx-mmap>` function asks to map ``length`` bytes starting at
-``offset`` in the memory of the device specified by ``fd`` into the
-application address space, preferably at address ``start``. This latter
-address is a hint only, and is usually specified as 0.
-
-Suitable length and offset parameters are queried with the
-:ref:`DMX_QUERYBUF` ioctl. Buffers must be allocated with the
-:ref:`DMX_REQBUFS` ioctl before they can be queried.
-
-To unmap buffers the :ref:`munmap() <dmx-munmap>` function is used.
-
-
-Return Value
-============
-
-On success :ref:`mmap() <dmx-mmap>` returns a pointer to the mapped buffer. On
-error ``MAP_FAILED`` (-1) is returned, and the ``errno`` variable is set
-appropriately. Possible error codes are:
-
-EBADF
-    ``fd`` is not a valid file descriptor.
-
-EACCES
-    ``fd`` is not open for reading and writing.
-
-EINVAL
-    The ``start`` or ``length`` or ``offset`` are not suitable. (E. g.
-    they are too large, or not aligned on a ``PAGESIZE`` boundary.)
-
-    The ``flags`` or ``prot`` value is not supported.
-
-    No buffers have been allocated with the
-    :ref:`DMX_REQBUFS` ioctl.
-
-ENOMEM
-    Not enough physical or virtual memory was available to complete the
-    request.
diff --git a/Documentation/media/uapi/dvb/dmx-munmap.rst b/Documentation/media/uapi/dvb/dmx-munmap.rst
deleted file mode 100644
index ef26b6f2b12b..000000000000
--- a/Documentation/media/uapi/dvb/dmx-munmap.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dmx-munmap:
-
-************
-DVB munmap()
-************
-
-Name
-====
-
-dmx-munmap - Unmap device memory
-
-.. warning:: This API is still experimental.
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-    #include <sys/mman.h>
-
-
-.. c:function:: int munmap( void *start, size_t length )
-    :name: dmx-munmap
-
-Arguments
-=========
-
-``start``
-    Address of the mapped buffer as returned by the
-    :ref:`mmap() <dmx-mmap>` function.
-
-``length``
-    Length of the mapped buffer. This must be the same value as given to
-    :ref:`mmap() <dmx-mmap>`.
-
-
-Description
-===========
-
-Unmaps a previously with the :ref:`mmap() <dmx-mmap>` function mapped
-buffer and frees it, if possible.
-
-
-Return Value
-============
-
-On success :ref:`munmap() <dmx-munmap>` returns 0, on failure -1 and the
-``errno`` variable is set appropriately:
-
-EINVAL
-    The ``start`` or ``length`` is incorrect, or no buffers have been
-    mapped yet.
diff --git a/Documentation/media/uapi/dvb/dmx-qbuf.rst b/Documentation/media/uapi/dvb/dmx-qbuf.rst
deleted file mode 100644
index 9dc845daa59d..000000000000
--- a/Documentation/media/uapi/dvb/dmx-qbuf.rst
+++ /dev/null
@@ -1,93 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_QBUF:
-
-*************************
-ioctl DMX_QBUF, DMX_DQBUF
-*************************
-
-Name
-====
-
-DMX_QBUF - DMX_DQBUF - Exchange a buffer with the driver
-
-.. warning:: this API is still experimental
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, DMX_QBUF, struct dmx_buffer *argp )
-    :name: DMX_QBUF
-
-.. c:function:: int ioctl( int fd, DMX_DQBUF, struct dmx_buffer *argp )
-    :name: DMX_DQBUF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <dmx_fopen>`.
-
-``argp``
-    Pointer to struct :c:type:`dmx_buffer`.
-
-
-Description
-===========
-
-Applications call the ``DMX_QBUF`` ioctl to enqueue an empty
-(capturing) or filled (output) buffer in the driver's incoming queue.
-The semantics depend on the selected I/O method.
-
-To enqueue a buffer applications set the ``index`` field. Valid index
-numbers range from zero to the number of buffers allocated with
-:ref:`DMX_REQBUFS` (struct :c:type:`dmx_requestbuffers` ``count``) minus
-one. The contents of the struct :c:type:`dmx_buffer` returned
-by a :ref:`DMX_QUERYBUF` ioctl will do as well.
-
-When ``DMX_QBUF`` is called with a pointer to this structure, it locks the
-memory pages of the buffer in physical memory, so they cannot be swapped
-out to disk. Buffers remain locked until dequeued, until the
-the device is closed.
-
-Applications call the ``DMX_DQBUF`` ioctl to dequeue a filled
-(capturing) buffer from the driver's outgoing queue.
-They just set the ``index`` field with the buffer ID to be queued.
-When ``DMX_DQBUF`` is called with a pointer to struct :c:type:`dmx_buffer`,
-the driver fills the remaining fields or returns an error code.
-
-By default ``DMX_DQBUF`` blocks when no buffer is in the outgoing
-queue. When the ``O_NONBLOCK`` flag was given to the
-:ref:`open() <dmx_fopen>` function, ``DMX_DQBUF`` returns
-immediately with an ``EAGAIN`` error code when no buffer is available.
-
-The struct :c:type:`dmx_buffer` structure is specified in
-:ref:`buffer`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EAGAIN
-    Non-blocking I/O has been selected using ``O_NONBLOCK`` and no
-    buffer was in the outgoing queue.
-
-EINVAL
-    The ``index`` is out of bounds, or no buffers have been allocated yet.
-
-EIO
-    ``DMX_DQBUF`` failed due to an internal error. Can also indicate
-    temporary problems like signal loss or CRC errors.
diff --git a/Documentation/media/uapi/dvb/dmx-querybuf.rst b/Documentation/media/uapi/dvb/dmx-querybuf.rst
deleted file mode 100644
index 4cf36e821696..000000000000
--- a/Documentation/media/uapi/dvb/dmx-querybuf.rst
+++ /dev/null
@@ -1,72 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_QUERYBUF:
-
-******************
-ioctl DMX_QUERYBUF
-******************
-
-Name
-====
-
-DMX_QUERYBUF - Query the status of a buffer
-
-.. warning:: this API is still experimental
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, DMX_QUERYBUF, struct dvb_buffer *argp )
-    :name: DMX_QUERYBUF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <dmx_fopen>`.
-
-``argp``
-    Pointer to struct :c:type:`dvb_buffer`.
-
-
-Description
-===========
-
-This ioctl is part of the mmap streaming I/O method. It can
-be used to query the status of a buffer at any time after buffers have
-been allocated with the :ref:`DMX_REQBUFS` ioctl.
-
-Applications set the ``index`` field. Valid index numbers range from zero
-to the number of buffers allocated with :ref:`DMX_REQBUFS`
-(struct :c:type:`dvb_requestbuffers` ``count``) minus one.
-
-After calling :ref:`DMX_QUERYBUF` with a pointer to this structure,
-drivers return an error code or fill the rest of the structure.
-
-On success, the ``offset`` will contain the offset of the buffer from the
-start of the device memory, the ``length`` field its size, and the
-``bytesused`` the number of bytes occupied by data in the buffer (payload).
-
-Return Value
-============
-
-On success 0 is returned, the ``offset`` will contain the offset of the
-buffer from the start of the device memory, the ``length`` field its size,
-and the ``bytesused`` the number of bytes occupied by data in the buffer
-(payload).
-
-On error it returns -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The ``index`` is out of bounds.
diff --git a/Documentation/media/uapi/dvb/dmx-remove-pid.rst b/Documentation/media/uapi/dvb/dmx-remove-pid.rst
deleted file mode 100644
index be992f44f306..000000000000
--- a/Documentation/media/uapi/dvb/dmx-remove-pid.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_REMOVE_PID:
-
-==============
-DMX_REMOVE_PID
-==============
-
-Name
-----
-
-DMX_REMOVE_PID
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, DMX_REMOVE_PID, __u16 *pid)
-    :name: DMX_REMOVE_PID
-
-
-Arguments
----------
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
-
-``pid``
-    PID of the PES filter to be removed.
-
-
-Description
------------
-
-This ioctl call allows to remove a PID when multiple PIDs are set on a
-transport stream filter, e. g. a filter previously set up with output
-equal to :c:type:`DMX_OUT_TSDEMUX_TAP <dmx_output>`, created via either
-:ref:`DMX_SET_PES_FILTER` or :ref:`DMX_ADD_PID`.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-reqbufs.rst b/Documentation/media/uapi/dvb/dmx-reqbufs.rst
deleted file mode 100644
index b302785bf678..000000000000
--- a/Documentation/media/uapi/dvb/dmx-reqbufs.rst
+++ /dev/null
@@ -1,83 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_REQBUFS:
-
-*****************
-ioctl DMX_REQBUFS
-*****************
-
-Name
-====
-
-DMX_REQBUFS - Initiate Memory Mapping and/or DMA buffer I/O
-
-.. warning:: this API is still experimental
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, DMX_REQBUFS, struct dmx_requestbuffers *argp )
-    :name: DMX_REQBUFS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <dmx_fopen>`.
-
-``argp``
-    Pointer to struct :c:type:`dmx_requestbuffers`.
-
-Description
-===========
-
-This ioctl is used to initiate a memory mapped or DMABUF based demux I/O.
-
-Memory mapped buffers are located in device memory and must be allocated
-with this ioctl before they can be mapped into the application's address
-space. User buffers are allocated by applications themselves, and this
-ioctl is merely used to switch the driver into user pointer I/O mode and
-to setup some internal structures. Similarly, DMABUF buffers are
-allocated by applications through a device driver, and this ioctl only
-configures the driver into DMABUF I/O mode without performing any direct
-allocation.
-
-To allocate device buffers applications initialize all fields of the
-struct :c:type:`dmx_requestbuffers` structure. They set the  ``count`` field
-to the desired number of buffers,  and ``size`` to the size of each
-buffer.
-
-When the ioctl is called with a pointer to this structure, the driver will
-attempt to allocate the requested number of buffers and it stores the actual
-number allocated in the ``count`` field. The ``count`` can be smaller than the number requested, even zero, when the driver runs out of free memory. A larger
-number is also possible when the driver requires more buffers to
-function correctly. The actual allocated buffer size can is returned
-at ``size``, and can be smaller than what's requested.
-
-When this I/O method is not supported, the ioctl returns an ``EOPNOTSUPP``
-error code.
-
-Applications can call :ref:`DMX_REQBUFS` again to change the number of
-buffers, however this cannot succeed when any buffers are still mapped.
-A ``count`` value of zero frees all buffers, after aborting or finishing
-any DMA in progress.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EOPNOTSUPP
-    The  the requested I/O method is not supported.
diff --git a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst
deleted file mode 100644
index 2dee0fb11f62..000000000000
--- a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_SET_BUFFER_SIZE:
-
-===================
-DMX_SET_BUFFER_SIZE
-===================
-
-Name
-----
-
-DMX_SET_BUFFER_SIZE
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl( int fd, DMX_SET_BUFFER_SIZE, unsigned long size)
-    :name: DMX_SET_BUFFER_SIZE
-
-
-Arguments
----------
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
-
-``size``
-    Unsigned long size
-
-Description
------------
-
-This ioctl call is used to set the size of the circular buffer used for
-filtered data. The default size is two maximum sized sections, i.e. if
-this function is not called a buffer size of ``2 * 4096`` bytes will be
-used.
-
-
-Return Value
-------------
-
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-set-filter.rst b/Documentation/media/uapi/dvb/dmx-set-filter.rst
deleted file mode 100644
index 66afbb9f2fe4..000000000000
--- a/Documentation/media/uapi/dvb/dmx-set-filter.rst
+++ /dev/null
@@ -1,64 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_SET_FILTER:
-
-==============
-DMX_SET_FILTER
-==============
-
-Name
-----
-
-DMX_SET_FILTER
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl( int fd, DMX_SET_FILTER, struct dmx_sct_filter_params *params)
-    :name: DMX_SET_FILTER
-
-Arguments
----------
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
-
-``params``
-
-    Pointer to structure containing filter parameters.
-
-
-Description
------------
-
-This ioctl call sets up a filter according to the filter and mask
-parameters provided. A timeout may be defined stating number of seconds
-to wait for a section to be loaded. A value of 0 means that no timeout
-should be applied. Finally there is a flag field where it is possible to
-state whether a section should be CRC-checked, whether the filter should
-be a ”one-shot” filter, i.e. if the filtering operation should be
-stopped after the first section is received, and whether the filtering
-operation should be started immediately (without waiting for a
-:ref:`DMX_START` ioctl call). If a filter was previously set-up, this
-filter will be canceled, and the receive buffer will be flushed.
-
-
-Return Value
-------------
-
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst b/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst
deleted file mode 100644
index dae5ab7878e5..000000000000
--- a/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_SET_PES_FILTER:
-
-==================
-DMX_SET_PES_FILTER
-==================
-
-Name
-----
-
-DMX_SET_PES_FILTER
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl( int fd, DMX_SET_PES_FILTER, struct dmx_pes_filter_params *params)
-    :name: DMX_SET_PES_FILTER
-
-
-Arguments
----------
-
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
-
-``params``
-    Pointer to structure containing filter parameters.
-
-
-Description
------------
-
-This ioctl call sets up a PES filter according to the parameters
-provided. By a PES filter is meant a filter that is based just on the
-packet identifier (PID), i.e. no PES header or payload filtering
-capability is supported.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-
-    -  .. row 1
-
-       -  ``EBUSY``
-
-       -  This error code indicates that there are conflicting requests.
-	  There are active filters filtering data from another input source.
-	  Make sure that these filters are stopped before starting this
-	  filter.
-
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-start.rst b/Documentation/media/uapi/dvb/dmx-start.rst
deleted file mode 100644
index 488289d02504..000000000000
--- a/Documentation/media/uapi/dvb/dmx-start.rst
+++ /dev/null
@@ -1,75 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_START:
-
-=========
-DMX_START
-=========
-
-Name
-----
-
-DMX_START
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl( int fd, DMX_START)
-    :name: DMX_START
-
-
-Arguments
----------
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
-
-Description
------------
-
-This ioctl call is used to start the actual filtering operation defined
-via the ioctl calls :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER`.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EINVAL``
-
-       -  Invalid argument, i.e. no filtering parameters provided via the
-	  :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER` ioctls.
-
-    -  .. row 2
-
-       -  ``EBUSY``
-
-       -  This error code indicates that there are conflicting requests.
-	  There are active filters filtering data from another input source.
-	  Make sure that these filters are stopped before starting this
-	  filter.
-
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx-stop.rst b/Documentation/media/uapi/dvb/dmx-stop.rst
deleted file mode 100644
index 982384d12923..000000000000
--- a/Documentation/media/uapi/dvb/dmx-stop.rst
+++ /dev/null
@@ -1,52 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _DMX_STOP:
-
-========
-DMX_STOP
-========
-
-Name
-----
-
-DMX_STOP
-
-
-Synopsis
---------
-
-.. c:function:: int ioctl( int fd, DMX_STOP)
-    :name: DMX_STOP
-
-
-Arguments
----------
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
-
-Description
------------
-
-This ioctl call is used to stop the actual filtering operation defined
-via the ioctl calls :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER` and
-started via the :ref:`DMX_START` command.
-
-
-Return Value
-------------
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/dmx_fcalls.rst b/Documentation/media/uapi/dvb/dmx_fcalls.rst
deleted file mode 100644
index 67312ab65f94..000000000000
--- a/Documentation/media/uapi/dvb/dmx_fcalls.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dmx_fcalls:
-
-********************
-Demux Function Calls
-********************
-
-.. toctree::
-    :maxdepth: 1
-
-    dmx-fopen
-    dmx-fclose
-    dmx-fread
-    dmx-fwrite
-    dmx-mmap
-    dmx-munmap
-    dmx-start
-    dmx-stop
-    dmx-set-filter
-    dmx-set-pes-filter
-    dmx-set-buffer-size
-    dmx-get-stc
-    dmx-get-pes-pids
-    dmx-add-pid
-    dmx-remove-pid
-    dmx-reqbufs
-    dmx-querybuf
-    dmx-expbuf
-    dmx-qbuf
diff --git a/Documentation/media/uapi/dvb/dmx_types.rst b/Documentation/media/uapi/dvb/dmx_types.rst
deleted file mode 100644
index b5cf704199e5..000000000000
--- a/Documentation/media/uapi/dvb/dmx_types.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dmx_types:
-
-****************
-Demux Data Types
-****************
-
-.. kernel-doc:: include/uapi/linux/dvb/dmx.h
diff --git a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst
deleted file mode 100644
index 172783b75fb7..000000000000
--- a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dvb-fe-read-status:
-
-***************************************
-Querying frontend status and statistics
-***************************************
-
-Once :ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` is called, the
-frontend will run a kernel thread that will periodically check for the
-tuner lock status and provide statistics about the quality of the
-signal.
-
-The information about the frontend tuner locking status can be queried
-using :ref:`FE_READ_STATUS`.
-
-Signal statistics are provided via
-:ref:`FE_GET_PROPERTY`.
-
-.. note::
-
-   Most statistics require the demodulator to be fully locked
-   (e. g. with :c:type:`FE_HAS_LOCK <fe_status>` bit set). See
-   :ref:`Frontend statistics indicators <frontend-stat-properties>` for
-   more details.
diff --git a/Documentation/media/uapi/dvb/dvb-frontend-event.rst b/Documentation/media/uapi/dvb/dvb-frontend-event.rst
deleted file mode 100644
index ad4af66040c7..000000000000
--- a/Documentation/media/uapi/dvb/dvb-frontend-event.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. c:type:: dvb_frontend_event
-
-***************
-frontend events
-***************
-
-
-.. code-block:: c
-
-     struct dvb_frontend_event {
-	 fe_status_t status;
-	 struct dvb_frontend_parameters parameters;
-     };
diff --git a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst
deleted file mode 100644
index 67c2a316019f..000000000000
--- a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst
+++ /dev/null
@@ -1,126 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. c:type:: dvb_frontend_parameters
-
-*******************
-frontend parameters
-*******************
-
-The kind of parameters passed to the frontend device for tuning depend
-on the kind of hardware you are using.
-
-The struct ``dvb_frontend_parameters`` uses a union with specific
-per-system parameters. However, as newer delivery systems required more
-data, the structure size weren't enough to fit, and just extending its
-size would break the existing applications. So, those parameters were
-replaced by the usage of
-:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>`
-ioctl's. The new API is flexible enough to add new parameters to
-existing delivery systems, and to add newer delivery systems.
-
-So, newer applications should use
-:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>`
-instead, in order to be able to support the newer System Delivery like
-DVB-S2, DVB-T2, DVB-C2, ISDB, etc.
-
-All kinds of parameters are combined as a union in the
-``dvb_frontend_parameters`` structure:
-
-
-.. code-block:: c
-
-    struct dvb_frontend_parameters {
-	uint32_t frequency;     /* (absolute) frequency in Hz for QAM/OFDM */
-		    /* intermediate frequency in kHz for QPSK */
-	fe_spectral_inversion_t inversion;
-	union {
-	    struct dvb_qpsk_parameters qpsk;
-	    struct dvb_qam_parameters  qam;
-	    struct dvb_ofdm_parameters ofdm;
-	    struct dvb_vsb_parameters  vsb;
-	} u;
-    };
-
-In the case of QPSK frontends the ``frequency`` field specifies the
-intermediate frequency, i.e. the offset which is effectively added to
-the local oscillator frequency (LOF) of the LNB. The intermediate
-frequency has to be specified in units of kHz. For QAM and OFDM
-frontends the ``frequency`` specifies the absolute frequency and is
-given in Hz.
-
-
-.. c:type:: dvb_qpsk_parameters
-
-QPSK parameters
-===============
-
-For satellite QPSK frontends you have to use the ``dvb_qpsk_parameters``
-structure:
-
-
-.. code-block:: c
-
-     struct dvb_qpsk_parameters {
-	 uint32_t        symbol_rate;  /* symbol rate in Symbols per second */
-	 fe_code_rate_t  fec_inner;    /* forward error correction (see above) */
-     };
-
-
-.. c:type:: dvb_qam_parameters
-
-QAM parameters
-==============
-
-for cable QAM frontend you use the ``dvb_qam_parameters`` structure:
-
-
-.. code-block:: c
-
-     struct dvb_qam_parameters {
-	 uint32_t         symbol_rate; /* symbol rate in Symbols per second */
-	 fe_code_rate_t   fec_inner;   /* forward error correction (see above) */
-	 fe_modulation_t  modulation;  /* modulation type (see above) */
-     };
-
-
-.. c:type:: dvb_vsb_parameters
-
-VSB parameters
-==============
-
-ATSC frontends are supported by the ``dvb_vsb_parameters`` structure:
-
-
-.. code-block:: c
-
-    struct dvb_vsb_parameters {
-	fe_modulation_t modulation; /* modulation type (see above) */
-    };
-
-
-.. c:type:: dvb_ofdm_parameters
-
-OFDM parameters
-===============
-
-DVB-T frontends are supported by the ``dvb_ofdm_parameters`` structure:
-
-
-.. code-block:: c
-
-     struct dvb_ofdm_parameters {
-	 fe_bandwidth_t      bandwidth;
-	 fe_code_rate_t      code_rate_HP;  /* high priority stream code rate */
-	 fe_code_rate_t      code_rate_LP;  /* low priority stream code rate */
-	 fe_modulation_t     constellation; /* modulation type (see above) */
-	 fe_transmit_mode_t  transmission_mode;
-	 fe_guard_interval_t guard_interval;
-	 fe_hierarchy_t      hierarchy_information;
-     };
diff --git a/Documentation/media/uapi/dvb/dvbapi.rst b/Documentation/media/uapi/dvb/dvbapi.rst
deleted file mode 100644
index 0fcc01f182f9..000000000000
--- a/Documentation/media/uapi/dvb/dvbapi.rst
+++ /dev/null
@@ -1,126 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. include:: <isonum.txt>
-
-.. _dvbapi:
-
-########################
-Part II - Digital TV API
-########################
-
-.. note::
-
-   This API is also known as Linux **DVB API**.
-
-   It it was originally written to support the European digital TV
-   standard (DVB), and later extended to support all digital TV standards.
-
-   In order to avoid confusion, within this document, it was opted to refer to
-   it, and to associated hardware as **Digital TV**.
-
-   The word **DVB** is reserved to be used for:
-
-     - the Digital TV API version
-       (e. g. DVB API version 3 or DVB API version 5);
-     - digital TV data types (enums, structs, defines, etc);
-     - digital TV device nodes (``/dev/dvb/...``);
-     - the European DVB standard.
-
-**Version 5.10**
-
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-    :maxdepth: 5
-    :numbered:
-
-    intro
-    frontend
-    demux
-    ca
-    net
-    legacy_dvb_apis
-    examples
-    headers
-
-
-**********************
-Revision and Copyright
-**********************
-
-Authors:
-
-- J. K. Metzler, Ralph <rjkm@metzlerbros.de>
-
- - Original author of the Digital TV API documentation.
-
-- O. C. Metzler, Marcus <rjkm@metzlerbros.de>
-
- - Original author of the Digital TV API documentation.
-
-- Carvalho Chehab, Mauro <mchehab+samsung@kernel.org>
-
- - Ported document to Docbook XML, addition of DVBv5 API, documentation gaps fix.
-
-**Copyright** |copy| 2002-2003 : Convergence GmbH
-
-**Copyright** |copy| 2009-2017 : Mauro Carvalho Chehab
-
-****************
-Revision History
-****************
-
-:revision: 2.2.0 / 2017-09-01 (*mcc*)
-
-Most gaps between the uAPI document and the Kernel implementation
-got fixed for the non-legacy API.
-
-:revision: 2.1.0 / 2015-05-29 (*mcc*)
-
-DocBook improvements and cleanups, in order to document the system calls
-on a more standard way and provide more description about the current
-Digital TV API.
-
-:revision: 2.0.4 / 2011-05-06 (*mcc*)
-
-Add more information about DVBv5 API, better describing the frontend
-GET/SET props ioctl's.
-
-
-:revision: 2.0.3 / 2010-07-03 (*mcc*)
-
-Add some frontend capabilities flags, present on kernel, but missing at
-the specs.
-
-
-:revision: 2.0.2 / 2009-10-25 (*mcc*)
-
-documents FE_SET_FRONTEND_TUNE_MODE and
-FE_DISHETWORK_SEND_LEGACY_CMD ioctls.
-
-
-:revision: 2.0.1 / 2009-09-16 (*mcc*)
-
-Added ISDB-T test originally written by Patrick Boettcher
-
-
-:revision: 2.0.0 / 2009-09-06 (*mcc*)
-
-Conversion from LaTex to DocBook XML. The contents is the same as the
-original LaTex version.
-
-
-:revision: 1.0.0 / 2003-07-24 (*rjkm*)
-
-Initial revision on LaTEX.
diff --git a/Documentation/media/uapi/dvb/dvbproperty.rst b/Documentation/media/uapi/dvb/dvbproperty.rst
deleted file mode 100644
index 0c4f5598f2be..000000000000
--- a/Documentation/media/uapi/dvb/dvbproperty.rst
+++ /dev/null
@@ -1,133 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend-properties:
-
-**************
-Property types
-**************
-
-Tuning into a Digital TV physical channel and starting decoding it
-requires changing a set of parameters, in order to control the tuner,
-the demodulator, the Linear Low-noise Amplifier (LNA) and to set the
-antenna subsystem via Satellite Equipment Control - SEC (on satellite
-systems). The actual parameters are specific to each particular digital
-TV standards, and may change as the digital TV specs evolves.
-
-In the past (up to DVB API version 3 - DVBv3), the strategy used was to have a
-union with the parameters needed to tune for DVB-S, DVB-C, DVB-T and
-ATSC delivery systems grouped there. The problem is that, as the second
-generation standards appeared, the size of such union was not big
-enough to group the structs that would be required for those new
-standards. Also, extending it would break userspace.
-
-So, the legacy union/struct based approach was deprecated, in favor
-of a properties set approach. On such approach,
-:ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>` are used
-to setup the frontend and read its status.
-
-The actual action is determined by a set of dtv_property cmd/data pairs.
-With one single ioctl, is possible to get/set up to 64 properties.
-
-This section describes the new and recommended way to set the frontend,
-with supports all digital TV delivery systems.
-
-.. note::
-
-   1. On Linux DVB API version 3, setting a frontend was done via
-      struct :c:type:`dvb_frontend_parameters`.
-
-   2. Don't use DVB API version 3 calls on hardware with supports
-      newer standards. Such API provides no support or a very limited
-      support to new standards and/or new hardware.
-
-   3. Nowadays, most frontends support multiple delivery systems.
-      Only with DVB API version 5 calls it is possible to switch between
-      the multiple delivery systems supported by a frontend.
-
-   4. DVB API version 5 is also called *S2API*, as the first
-      new standard added to it was DVB-S2.
-
-**Example**: in order to set the hardware to tune into a DVB-C channel
-at 651 kHz, modulated with 256-QAM, FEC 3/4 and symbol rate of 5.217
-Mbauds, those properties should be sent to
-:ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` ioctl:
-
-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` = SYS_DVBC_ANNEX_A
-
-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` = 651000000
-
-  :ref:`DTV_MODULATION <DTV-MODULATION>` = QAM_256
-
-  :ref:`DTV_INVERSION <DTV-INVERSION>` = INVERSION_AUTO
-
-  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>` = 5217000
-
-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` = FEC_3_4
-
-  :ref:`DTV_TUNE <DTV-TUNE>`
-
-The code that would that would do the above is show in
-:ref:`dtv-prop-example`.
-
-.. code-block:: c
-    :caption: Example: Setting digital TV frontend properties
-    :name: dtv-prop-example
-
-    #include <stdio.h>
-    #include <fcntl.h>
-    #include <sys/ioctl.h>
-    #include <linux/dvb/frontend.h>
-
-    static struct dtv_property props[] = {
-	{ .cmd = DTV_DELIVERY_SYSTEM, .u.data = SYS_DVBC_ANNEX_A },
-	{ .cmd = DTV_FREQUENCY,       .u.data = 651000000 },
-	{ .cmd = DTV_MODULATION,      .u.data = QAM_256 },
-	{ .cmd = DTV_INVERSION,       .u.data = INVERSION_AUTO },
-	{ .cmd = DTV_SYMBOL_RATE,     .u.data = 5217000 },
-	{ .cmd = DTV_INNER_FEC,       .u.data = FEC_3_4 },
-	{ .cmd = DTV_TUNE }
-    };
-
-    static struct dtv_properties dtv_prop = {
-	.num = 6, .props = props
-    };
-
-    int main(void)
-    {
-	int fd = open("/dev/dvb/adapter0/frontend0", O_RDWR);
-
-	if (!fd) {
-	    perror ("open");
-	    return -1;
-	}
-	if (ioctl(fd, FE_SET_PROPERTY, &dtv_prop) == -1) {
-	    perror("ioctl");
-	    return -1;
-	}
-	printf("Frontend set\\n");
-	return 0;
-    }
-
-.. attention:: While it is possible to directly call the Kernel code like the
-   above example, it is strongly recommended to use
-   `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__, as it
-   provides abstraction to work with the supported digital TV standards and
-   provides methods for usual operations like program scanning and to
-   read/write channel descriptor files.
-
-.. toctree::
-    :maxdepth: 1
-
-    fe_property_parameters
-    frontend-stat-properties
-    frontend-property-terrestrial-systems
-    frontend-property-cable-systems
-    frontend-property-satellite-systems
-    frontend-header
diff --git a/Documentation/media/uapi/dvb/dvbstb.svg b/Documentation/media/uapi/dvb/dvbstb.svg
deleted file mode 100644
index c7672148d6ff..000000000000
--- a/Documentation/media/uapi/dvb/dvbstb.svg
+++ /dev/null
@@ -1,43 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-    This file is dual-licensed: you can use it either under the terms
-    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-    dual licensing only applies to this file, and not this project as a
-    whole.
-
-    a) This file is free software; you can redistribute it and/or
-       modify it under the terms of the GNU General Public License as
-       published by the Free Software Foundation version 2 of
-       the License.
-
-       This file is distributed in the hope that it will be useful,
-       but WITHOUT ANY WARRANTY; without even the implied warranty of
-       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-       GNU General Public License for more details.
-
-    Or, alternatively,
-
-    b) Permission is granted to copy, distribute and/or modify this
-       document under the terms of the GNU Free Documentation License,
-       Version 1.1 or any later version published by the Free Software
-       Foundation, with no Invariant Sections, no Front-Cover Texts
-       and no Back-Cover Texts. A copy of the license is included at
-       Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg id="svg2" width="15.847cm" height="8.4187cm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 23770.123 12628.122" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><defs id="defs142"><marker id="Arrow1Lend" overflow="visible" orient="auto"><path id="path954" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker><marker id="marker1243" overflow="visible" orient="auto"><path id="path1241" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker></defs><metadata id="metadata519"><rdf:RDF><cc:Work
-rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><rect id="rect197" class="BoundingBox" x="5355.1" y="13.122" width="18403" height="9603" fill="none"/><path id="path199" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="#fff"/><path id="path201" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="none" stroke="#000"/><rect id="rect206" class="BoundingBox" x="13.122" y="4013.1" width="4544" height="2403" fill="none"/><path id="path208" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path210" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text212" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition"
-x="1281.1219" y="5435.1221"><tspan id="tspan218" fill="#000000">Antena</tspan></tspan></tspan></text>
-<rect id="rect223" class="BoundingBox" x="6213.1" y="1813.1" width="4544" height="2403" fill="none"/><path id="path225" d="m8485.1 4214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path227" d="m8485.1 4214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text229" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan231" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan233" class="TextPosition" x="7217.1221" y="3235.1221"><tspan id="tspan235" fill="#000000">Frontend</tspan></tspan></tspan></text>
-<rect id="rect240" class="BoundingBox" x="12113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path242" d="m14385 4214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path244" d="m14385 4214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text246" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan248" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan250" class="TextPosition" x="13944.122" y="3235.1221"><tspan id="tspan252" fill="#000000">CA</tspan></tspan></tspan></text>
-<rect id="rect257" class="BoundingBox" x="18113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path259" d="m20385 4214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path261" d="m20385 4214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text263" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan265" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan267" class="TextPosition" x="19384.123" y="3235.1221"><tspan id="tspan269" fill="#000000">Demux</tspan></tspan></tspan></text>
-<rect id="rect274" class="BoundingBox" x="6113.1" y="5813.1" width="4544" height="2403" fill="none"/><path id="path276" d="m8385.1 8214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path278" d="m8385.1 8214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text280" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan282" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan284" class="TextPosition" x="7733.1221" y="7235.1221"><tspan id="tspan286" fill="#000000">SEC</tspan></tspan></tspan></text>
-<rect id="rect291" class="BoundingBox" x="12213" y="5813.1" width="4544" height="2403" fill="none"/><path id="path293" d="m14485 8214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path295" d="m14485 8214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><text id="text297" class="TextShape" x="-2443.8779" y="-4903.3779"><tspan id="tspan299" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan301" class="TextPosition" x="13676.122" y="6917.6221"><tspan id="tspan303" fill="#000000">Audio</tspan></tspan></tspan></text>
-<rect id="rect308" class="BoundingBox" x="18113" y="5813.1" width="4544" height="2403" fill="none"/><path id="path310" d="m20385 8214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path312" d="m20385 8214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><text id="text314" class="TextShape" x="-2443.8779" y="-4903.3779"><tspan id="tspan316" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan318" class="TextPosition" x="19583.123" y="6917.6221"><tspan id="tspan320" fill="#000000">Video</tspan></tspan></tspan></text>
-<rect id="rect325" class="BoundingBox" x="15213" y="10213" width="4544" height="2403" fill="none"/><path id="path327" d="m17485 12614h-2271v-2400h4541v2400z" fill="#fff"/><path id="path329" d="m17485 12614h-2271v-2400h4541v2400z" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><text id="text331" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan333" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan335" class="TextPosition" x="17076.123" y="11635.122"><tspan id="tspan337" fill="#000000">TV</tspan></tspan></tspan></text>
-<rect id="rect342" class="BoundingBox" x="4555.1" y="3014.1" width="1661" height="2202" fill="none"/><path id="path344" d="m4556.1 5214.1 1400-1857" fill="none" stroke="#000"/><path id="path346" d="m6215.1 3014.1-391 269 240 181z"/><rect id="rect351" class="BoundingBox" x="4555.1" y="5213.1" width="1561" height="1802" fill="none"/><path id="path353" d="m4556.1 5214.1 1277 1475" fill="none" stroke="#000"/><path id="path355" d="m6115.1 7014.1-181-438-227 196z"/><rect id="rect360" class="BoundingBox" x="10755" y="2864.1" width="1361" height="301" fill="none"/><path id="path362" d="m10756 3014.1h929" fill="none" stroke="#000"/><path id="path364" d="m12115 3014.1-450-150v300z"/><rect id="rect369" class="BoundingBox" x="16655" y="2864.1" width="1461" height="301" fill="none"/><path id="path371" d="m16656 3014.1h1029" fill="none" stroke="#000"/><path id="path373" d="m18115
-3014.1-450-150v300z"/><rect id="rect378" class="BoundingBox" x="20235" y="4213.1" width="301" height="1602" fill="none"/><rect id="rect387" class="BoundingBox" x="17485" y="8213.1" width="2902" height="2002" fill="none"/><path id="path389" d="m20385 8214.1-2546 1756" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><path id="path391" d="m17485 10214 456-132-171-247z"/><rect id="rect396" class="BoundingBox" x="14484" y="8213.1" width="3002" height="2002" fill="none"/><path id="path398" d="m14485 8214.1 2642 1761" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><path id="path400" d="m17485 10214-291-374-167 249z"/><rect id="rect405" class="BoundingBox" x="14485" y="4213.1" width="5902" height="1629" fill="none"/><path id="path949" d="m20387 4213.1v1629" fill="none" marker-end="url(#Arrow1Lend)"
-stroke="#000" stroke-dasharray="26.45879596, 52.91759192999999328" stroke-linejoin="miter" stroke-width="26.459"/><path id="path1233" d="m20385 4214.1-3628 1599" fill="none" marker-end="url(#marker1243)" stroke="#000" stroke-dasharray="26.45879596, 52.91759193" stroke-linejoin="miter" stroke-width="26.459"/><text id="text297-3" class="TextShape" x="-2911.9202" y="-4257.2061" font-size="12px" stroke-width="1"><tspan id="tspan299-6" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400" stroke-width="1"><tspan id="tspan301-7" class="TextPosition" x="13208.079" y="7563.793" stroke-width="1"><tspan id="tspan303-5" fill="#000000" stroke-width="1">Decoder</tspan></tspan></tspan></text>
-<text id="text297-3-3" class="TextShape" x="2950.9287" y="-4259.5928" font-size="12px" stroke-width="1"><tspan id="tspan299-6-5" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400" stroke-width="1"><tspan id="tspan301-7-6" class="TextPosition" x="19070.928" y="7561.4053" stroke-width="1"><tspan id="tspan303-5-2" fill="#000000" stroke-width="1">Decoder</tspan></tspan></tspan></text>
-</svg>
diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst
deleted file mode 100644
index eaa41bc8d173..000000000000
--- a/Documentation/media/uapi/dvb/examples.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dvb_examples:
-
-********
-Examples
-********
-
-In the past, we used to have a set of examples here. However, those
-examples got out of date and doesn't even compile nowadays.
-
-Also, nowadays, the best is to use the libdvbv5 DVB API nowadays,
-with is fully documented.
-
-Please refer to the `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__
-for updated/recommended examples.
diff --git a/Documentation/media/uapi/dvb/fe-bandwidth-t.rst b/Documentation/media/uapi/dvb/fe-bandwidth-t.rst
deleted file mode 100644
index c3d7837b5f87..000000000000
--- a/Documentation/media/uapi/dvb/fe-bandwidth-t.rst
+++ /dev/null
@@ -1,81 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-******************
-Frontend bandwidth
-******************
-
-.. c:type:: fe_bandwidth
-
-.. flat-table:: enum fe_bandwidth
-    :header-rows:  1
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ID
-
-       -  Description
-
-    -  .. row 2
-
-       -  .. _BANDWIDTH-AUTO:
-
-	  ``BANDWIDTH_AUTO``
-
-       -  Autodetect bandwidth (if supported)
-
-    -  .. row 3
-
-       -  .. _BANDWIDTH-1-712-MHZ:
-
-	  ``BANDWIDTH_1_712_MHZ``
-
-       -  1.712 MHz
-
-    -  .. row 4
-
-       -  .. _BANDWIDTH-5-MHZ:
-
-	  ``BANDWIDTH_5_MHZ``
-
-       -  5 MHz
-
-    -  .. row 5
-
-       -  .. _BANDWIDTH-6-MHZ:
-
-	  ``BANDWIDTH_6_MHZ``
-
-       -  6 MHz
-
-    -  .. row 6
-
-       -  .. _BANDWIDTH-7-MHZ:
-
-	  ``BANDWIDTH_7_MHZ``
-
-       -  7 MHz
-
-    -  .. row 7
-
-       -  .. _BANDWIDTH-8-MHZ:
-
-	  ``BANDWIDTH_8_MHZ``
-
-       -  8 MHz
-
-    -  .. row 8
-
-       -  .. _BANDWIDTH-10-MHZ:
-
-	  ``BANDWIDTH_10_MHZ``
-
-       -  10 MHz
diff --git a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst
deleted file mode 100644
index 88fd2186ca4d..000000000000
--- a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst
+++ /dev/null
@@ -1,55 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_DISEQC_RECV_SLAVE_REPLY:
-
-********************************
-ioctl FE_DISEQC_RECV_SLAVE_REPLY
-********************************
-
-Name
-====
-
-FE_DISEQC_RECV_SLAVE_REPLY - Receives reply from a DiSEqC 2.0 command
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_DISEQC_RECV_SLAVE_REPLY, struct dvb_diseqc_slave_reply *argp )
-    :name: FE_DISEQC_RECV_SLAVE_REPLY
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``argp``
-    pointer to struct :c:type:`dvb_diseqc_slave_reply`.
-
-
-Description
-===========
-
-Receives reply from a DiSEqC 2.0 command.
-
-The received message is stored at the buffer pointed by ``argp``.
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst b/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst
deleted file mode 100644
index 92929c2e75db..000000000000
--- a/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst
+++ /dev/null
@@ -1,53 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_DISEQC_RESET_OVERLOAD:
-
-******************************
-ioctl FE_DISEQC_RESET_OVERLOAD
-******************************
-
-Name
-====
-
-FE_DISEQC_RESET_OVERLOAD - Restores the power to the antenna subsystem, if it was powered off due - to power overload.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_DISEQC_RESET_OVERLOAD, NULL )
-    :name: FE_DISEQC_RESET_OVERLOAD
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-Description
-===========
-
-If the bus has been automatically powered off due to power overload,
-this ioctl call restores the power to the bus. The call requires
-read/write access to the device. This call has no effect if the device
-is manually powered off. Not all Digital TV adapters support this ioctl.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst
deleted file mode 100644
index 8af872d306aa..000000000000
--- a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_DISEQC_SEND_BURST:
-
-**************************
-ioctl FE_DISEQC_SEND_BURST
-**************************
-
-Name
-====
-
-FE_DISEQC_SEND_BURST - Sends a 22KHz tone burst for 2x1 mini DiSEqC satellite selection.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_DISEQC_SEND_BURST, enum fe_sec_mini_cmd tone )
-    :name: FE_DISEQC_SEND_BURST
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``tone``
-    An integer enumered value described at :c:type:`fe_sec_mini_cmd`.
-
-
-Description
-===========
-
-This ioctl is used to set the generation of a 22kHz tone burst for mini
-DiSEqC satellite selection for 2x1 switches. This call requires
-read/write permissions.
-
-It provides support for what's specified at
-`Digital Satellite Equipment Control (DiSEqC) - Simple "ToneBurst" Detection Circuit specification. <http://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/simple_tone_burst_detec.pdf>`__
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst
deleted file mode 100644
index 30a48114153c..000000000000
--- a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_DISEQC_SEND_MASTER_CMD:
-
-*******************************
-ioctl FE_DISEQC_SEND_MASTER_CMD
-*******************************
-
-Name
-====
-
-FE_DISEQC_SEND_MASTER_CMD - Sends a DiSEqC command
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_DISEQC_SEND_MASTER_CMD, struct dvb_diseqc_master_cmd *argp )
-    :name: FE_DISEQC_SEND_MASTER_CMD
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``argp``
-    pointer to struct
-    :c:type:`dvb_diseqc_master_cmd`
-
-
-Description
-===========
-
-Sends the DiSEqC command pointed by :c:type:`dvb_diseqc_master_cmd`
-to the antenna subsystem.
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
diff --git a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst
deleted file mode 100644
index 13811289971b..000000000000
--- a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_DISHNETWORK_SEND_LEGACY_CMD:
-
-******************************
-FE_DISHNETWORK_SEND_LEGACY_CMD
-******************************
-
-Name
-====
-
-FE_DISHNETWORK_SEND_LEGACY_CMD
-
-
-Synopsis
-========
-
-.. c:function:: int  ioctl(int fd, FE_DISHNETWORK_SEND_LEGACY_CMD, unsigned long cmd)
-    :name: FE_DISHNETWORK_SEND_LEGACY_CMD
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
-
-``cmd``
-    Sends the specified raw cmd to the dish via DISEqC.
-
-
-Description
-===========
-
-.. warning::
-   This is a very obscure legacy command, used only at stv0299
-   driver. Should not be used on newer drivers.
-
-It provides a non-standard method for selecting Diseqc voltage on the
-frontend, for Dish Network legacy switches.
-
-As support for this ioctl were added in 2004, this means that such
-dishes were already legacy in 2004.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst
deleted file mode 100644
index 32b7d140d80b..000000000000
--- a/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst
+++ /dev/null
@@ -1,61 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_ENABLE_HIGH_LNB_VOLTAGE:
-
-********************************
-ioctl FE_ENABLE_HIGH_LNB_VOLTAGE
-********************************
-
-Name
-====
-
-FE_ENABLE_HIGH_LNB_VOLTAGE - Select output DC level between normal LNBf voltages or higher LNBf - voltages.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_ENABLE_HIGH_LNB_VOLTAGE, unsigned int high )
-    :name: FE_ENABLE_HIGH_LNB_VOLTAGE
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``high``
-    Valid flags:
-
-    -  0 - normal 13V and 18V.
-
-    -  >0 - enables slightly higher voltages instead of 13/18V, in order
-       to compensate for long antenna cables.
-
-
-Description
-===========
-
-Select output DC level between normal LNBf voltages or higher LNBf
-voltages between 0 (normal) or a value grater than 0 for higher
-voltages.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-get-event.rst b/Documentation/media/uapi/dvb/fe-get-event.rst
deleted file mode 100644
index 2573d5b9b636..000000000000
--- a/Documentation/media/uapi/dvb/fe-get-event.rst
+++ /dev/null
@@ -1,78 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_GET_EVENT:
-
-************
-FE_GET_EVENT
-************
-
-Name
-====
-
-FE_GET_EVENT
-
-.. attention:: This ioctl is deprecated.
-
-
-Synopsis
-========
-
-.. c:function:: int  ioctl(int fd, FE_GET_EVENT, struct dvb_frontend_event *ev)
-    :name: FE_GET_EVENT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
-
-``ev``
-    Points to the location where the event, if any, is to be stored.
-
-
-Description
-===========
-
-This ioctl call returns a frontend event if available. If an event is
-not available, the behavior depends on whether the device is in blocking
-or non-blocking mode. In the latter case, the call fails immediately
-with errno set to ``EWOULDBLOCK``. In the former case, the call blocks until
-an event becomes available.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EWOULDBLOCK``
-
-       -  There is no event pending, and the device is in non-blocking mode.
-
-    -  .. row 2
-
-       -  ``EOVERFLOW``
-
-       -  Overflow in event queue - one or more events were lost.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-get-frontend.rst b/Documentation/media/uapi/dvb/fe-get-frontend.rst
deleted file mode 100644
index 6cd5250d1832..000000000000
--- a/Documentation/media/uapi/dvb/fe-get-frontend.rst
+++ /dev/null
@@ -1,69 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_GET_FRONTEND:
-
-***************
-FE_GET_FRONTEND
-***************
-
-Name
-====
-
-FE_GET_FRONTEND
-
-.. attention:: This ioctl is deprecated.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl(int fd, FE_GET_FRONTEND, struct dvb_frontend_parameters *p)
-    :name: FE_GET_FRONTEND
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
-
-
-``p``
-    Points to parameters for tuning operation.
-
-
-Description
-===========
-
-This ioctl call queries the currently effective frontend parameters. For
-this command, read-only access to the device is sufficient.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EINVAL``
-
-       -  Maximum supported symbol rate reached.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-get-info.rst b/Documentation/media/uapi/dvb/fe-get-info.rst
deleted file mode 100644
index 551e68b11528..000000000000
--- a/Documentation/media/uapi/dvb/fe-get-info.rst
+++ /dev/null
@@ -1,70 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_GET_INFO:
-
-*****************
-ioctl FE_GET_INFO
-*****************
-
-Name
-====
-
-FE_GET_INFO - Query Digital TV frontend capabilities and returns information
-about the - front-end. This call only requires read-only access to the device.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_GET_INFO, struct dvb_frontend_info *argp )
-    :name: FE_GET_INFO
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``argp``
-    pointer to struct struct
-    :c:type:`dvb_frontend_info`
-
-
-Description
-===========
-
-All Digital TV frontend devices support the :ref:`FE_GET_INFO` ioctl. It is
-used to identify kernel devices compatible with this specification and to
-obtain information about driver and hardware capabilities. The ioctl
-takes a pointer to dvb_frontend_info which is filled by the driver.
-When the driver is not compatible with this specification the ioctl
-returns an error.
-
-
-frontend capabilities
-=====================
-
-Capabilities describe what a frontend can do. Some capabilities are
-supported only on some specific frontend types.
-
-The frontend capabilities are described at :c:type:`fe_caps`.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst
deleted file mode 100644
index 99386c7461b3..000000000000
--- a/Documentation/media/uapi/dvb/fe-get-property.rst
+++ /dev/null
@@ -1,83 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_GET_PROPERTY:
-
-**************************************
-ioctl FE_SET_PROPERTY, FE_GET_PROPERTY
-**************************************
-
-Name
-====
-
-FE_SET_PROPERTY - FE_GET_PROPERTY - FE_SET_PROPERTY sets one or more frontend properties. - FE_GET_PROPERTY returns one or more frontend properties.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_GET_PROPERTY, struct dtv_properties *argp )
-    :name: FE_GET_PROPERTY
-
-.. c:function:: int ioctl( int fd, FE_SET_PROPERTY, struct dtv_properties *argp )
-    :name: FE_SET_PROPERTY
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``argp``
-    Pointer to struct :c:type:`dtv_properties`.
-
-
-Description
-===========
-
-All Digital TV frontend devices support the ``FE_SET_PROPERTY`` and
-``FE_GET_PROPERTY`` ioctls. The supported properties and statistics
-depends on the delivery system and on the device:
-
--  ``FE_SET_PROPERTY:``
-
-   -  This ioctl is used to set one or more frontend properties.
-
-   -  This is the basic command to request the frontend to tune into
-      some frequency and to start decoding the digital TV signal.
-
-   -  This call requires read/write access to the device.
-
-.. note::
-
-   At return, the values aren't updated to reflect the actual
-   parameters used. If the actual parameters are needed, an explicit
-   call to ``FE_GET_PROPERTY`` is needed.
-
--  ``FE_GET_PROPERTY:``
-
-   -  This ioctl is used to get properties and statistics from the
-      frontend.
-
-   -  No properties are changed, and statistics aren't reset.
-
-   -  This call only requires read-only access to the device.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-read-ber.rst b/Documentation/media/uapi/dvb/fe-read-ber.rst
deleted file mode 100644
index e579d648687e..000000000000
--- a/Documentation/media/uapi/dvb/fe-read-ber.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_READ_BER:
-
-***********
-FE_READ_BER
-***********
-
-Name
-====
-
-FE_READ_BER
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
-========
-
-.. c:function:: int  ioctl(int fd, FE_READ_BER, uint32_t *ber)
-    :name: FE_READ_BER
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
-
-``ber``
-    The bit error rate is stored into \*ber.
-
-
-Description
-===========
-
-This ioctl call returns the bit error rate for the signal currently
-received/demodulated by the front-end. For this command, read-only
-access to the device is sufficient.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-read-signal-strength.rst b/Documentation/media/uapi/dvb/fe-read-signal-strength.rst
deleted file mode 100644
index 0a0c0c2ff207..000000000000
--- a/Documentation/media/uapi/dvb/fe-read-signal-strength.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_READ_SIGNAL_STRENGTH:
-
-***********************
-FE_READ_SIGNAL_STRENGTH
-***********************
-
-Name
-====
-
-FE_READ_SIGNAL_STRENGTH
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_READ_SIGNAL_STRENGTH, uint16_t *strength)
-    :name: FE_READ_SIGNAL_STRENGTH
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
-
-``strength``
-    The signal strength value is stored into \*strength.
-
-
-Description
-===========
-
-This ioctl call returns the signal strength value for the signal
-currently received by the front-end. For this command, read-only access
-to the device is sufficient.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-read-snr.rst b/Documentation/media/uapi/dvb/fe-read-snr.rst
deleted file mode 100644
index 2a7a0d8f1fd5..000000000000
--- a/Documentation/media/uapi/dvb/fe-read-snr.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_READ_SNR:
-
-***********
-FE_READ_SNR
-***********
-
-Name
-====
-
-FE_READ_SNR
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
-========
-
-.. c:function:: int  ioctl(int fd, FE_READ_SNR, int16_t *snr)
-    :name: FE_READ_SNR
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
-
-``snr``
-    The signal-to-noise ratio is stored into \*snr.
-
-
-Description
-===========
-
-This ioctl call returns the signal-to-noise ratio for the signal
-currently received by the front-end. For this command, read-only access
-to the device is sufficient.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-read-status.rst b/Documentation/media/uapi/dvb/fe-read-status.rst
deleted file mode 100644
index 0dfc9fdf568f..000000000000
--- a/Documentation/media/uapi/dvb/fe-read-status.rst
+++ /dev/null
@@ -1,72 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_READ_STATUS:
-
-********************
-ioctl FE_READ_STATUS
-********************
-
-Name
-====
-
-FE_READ_STATUS - Returns status information about the front-end. This call only requires - read-only access to the device
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_READ_STATUS, unsigned int *status )
-    :name: FE_READ_STATUS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``status``
-    pointer to a bitmask integer filled with the values defined by enum
-    :c:type:`fe_status`.
-
-
-Description
-===========
-
-All Digital TV frontend devices support the ``FE_READ_STATUS`` ioctl. It is
-used to check about the locking status of the frontend after being
-tuned. The ioctl takes a pointer to an integer where the status will be
-written.
-
-.. note::
-
-   The size of status is actually sizeof(enum fe_status), with
-   varies according with the architecture. This needs to be fixed in the
-   future.
-
-
-int fe_status
-=============
-
-The fe_status parameter is used to indicate the current state and/or
-state changes of the frontend hardware. It is produced using the enum
-:c:type:`fe_status` values on a bitmask
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst b/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst
deleted file mode 100644
index 19c532f750aa..000000000000
--- a/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_READ_UNCORRECTED_BLOCKS:
-
-**************************
-FE_READ_UNCORRECTED_BLOCKS
-**************************
-
-Name
-====
-
-FE_READ_UNCORRECTED_BLOCKS
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_READ_UNCORRECTED_BLOCKS, uint32_t *ublocks)
-    :name: FE_READ_UNCORRECTED_BLOCKS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
-
-``ublocks``
-    The total number of uncorrected blocks seen by the driver so far.
-
-
-Description
-===========
-
-This ioctl call returns the number of uncorrected blocks detected by the
-device driver during its lifetime. For meaningful measurements, the
-increment in block count during a specific time interval should be
-calculated. For this command, read-only access to the device is
-sufficient.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst
deleted file mode 100644
index 36e8913170e1..000000000000
--- a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst
+++ /dev/null
@@ -1,64 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_SET_FRONTEND_TUNE_MODE:
-
-*******************************
-ioctl FE_SET_FRONTEND_TUNE_MODE
-*******************************
-
-Name
-====
-
-FE_SET_FRONTEND_TUNE_MODE - Allow setting tuner mode flags to the frontend.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_SET_FRONTEND_TUNE_MODE, unsigned int flags )
-    :name: FE_SET_FRONTEND_TUNE_MODE
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``flags``
-    Valid flags:
-
-    -  0 - normal tune mode
-
-    -  ``FE_TUNE_MODE_ONESHOT`` - When set, this flag will disable any
-       zigzagging or other "normal" tuning behaviour. Additionally,
-       there will be no automatic monitoring of the lock status, and
-       hence no frontend events will be generated. If a frontend device
-       is closed, this flag will be automatically turned off when the
-       device is reopened read-write.
-
-
-Description
-===========
-
-Allow setting tuner mode flags to the frontend, between 0 (normal) or
-``FE_TUNE_MODE_ONESHOT`` mode
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-set-frontend.rst b/Documentation/media/uapi/dvb/fe-set-frontend.rst
deleted file mode 100644
index 23caae2588d2..000000000000
--- a/Documentation/media/uapi/dvb/fe-set-frontend.rst
+++ /dev/null
@@ -1,78 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_SET_FRONTEND:
-
-***************
-FE_SET_FRONTEND
-***************
-
-.. attention:: This ioctl is deprecated.
-
-Name
-====
-
-FE_SET_FRONTEND
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl(int fd, FE_SET_FRONTEND, struct dvb_frontend_parameters *p)
-    :name: FE_SET_FRONTEND
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
-
-``p``
-    Points to parameters for tuning operation.
-
-
-Description
-===========
-
-This ioctl call starts a tuning operation using specified parameters.
-The result of this call will be successful if the parameters were valid
-and the tuning could be initiated. The result of the tuning operation in
-itself, however, will arrive asynchronously as an event (see
-documentation for :ref:`FE_GET_EVENT` and
-FrontendEvent.) If a new :ref:`FE_SET_FRONTEND`
-operation is initiated before the previous one was completed, the
-previous operation will be aborted in favor of the new one. This command
-requires read/write access to the device.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-    -  .. row 1
-
-       -  ``EINVAL``
-
-       -  Maximum supported symbol rate reached.
-
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-set-tone.rst b/Documentation/media/uapi/dvb/fe-set-tone.rst
deleted file mode 100644
index fb605e8c9fc4..000000000000
--- a/Documentation/media/uapi/dvb/fe-set-tone.rst
+++ /dev/null
@@ -1,65 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_SET_TONE:
-
-*****************
-ioctl FE_SET_TONE
-*****************
-
-Name
-====
-
-FE_SET_TONE - Sets/resets the generation of the continuous 22kHz tone.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_SET_TONE, enum fe_sec_tone_mode tone )
-    :name: FE_SET_TONE
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``tone``
-    an integer enumered value described at :c:type:`fe_sec_tone_mode`
-
-
-Description
-===========
-
-This ioctl is used to set the generation of the continuous 22kHz tone.
-This call requires read/write permissions.
-
-Usually, satellite antenna subsystems require that the digital TV device
-to send a 22kHz tone in order to select between high/low band on some
-dual-band LNBf. It is also used to send signals to DiSEqC equipment, but
-this is done using the DiSEqC ioctls.
-
-.. attention:: If more than one device is connected to the same antenna,
-   setting a tone may interfere on other devices, as they may lose the
-   capability of selecting the band. So, it is recommended that applications
-   would change to SEC_TONE_OFF when the device is not used.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-set-voltage.rst b/Documentation/media/uapi/dvb/fe-set-voltage.rst
deleted file mode 100644
index c81a8e6a59aa..000000000000
--- a/Documentation/media/uapi/dvb/fe-set-voltage.rst
+++ /dev/null
@@ -1,69 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _FE_SET_VOLTAGE:
-
-********************
-ioctl FE_SET_VOLTAGE
-********************
-
-Name
-====
-
-FE_SET_VOLTAGE - Allow setting the DC level sent to the antenna subsystem.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, FE_SET_VOLTAGE, enum fe_sec_voltage voltage )
-    :name: FE_SET_VOLTAGE
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``voltage``
-    an integer enumered value described at :c:type:`fe_sec_voltage`
-
-
-Description
-===========
-
-This ioctl allows to set the DC voltage level sent through the antenna
-cable to 13V, 18V or off.
-
-Usually, a satellite antenna subsystems require that the digital TV
-device to send a DC voltage to feed power to the LNBf. Depending on the
-LNBf type, the polarization or the intermediate frequency (IF) of the
-LNBf can controlled by the voltage level. Other devices (for example,
-the ones that implement DISEqC and multipoint LNBf's don't need to
-control the voltage level, provided that either 13V or 18V is sent to
-power up the LNBf.
-
-.. attention:: if more than one device is connected to the same antenna,
-   setting a voltage level may interfere on other devices, as they may lose
-   the capability of setting polarization or IF. So, on those cases, setting
-   the voltage to SEC_VOLTAGE_OFF while the device is not is used is
-   recommended.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/fe-type-t.rst b/Documentation/media/uapi/dvb/fe-type-t.rst
deleted file mode 100644
index 9720d2f7ba35..000000000000
--- a/Documentation/media/uapi/dvb/fe-type-t.rst
+++ /dev/null
@@ -1,98 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-*************
-Frontend type
-*************
-
-For historical reasons, frontend types are named by the type of
-modulation used in transmission. The fontend types are given by
-fe_type_t type, defined as:
-
-
-.. c:type:: fe_type
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. flat-table:: Frontend types
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       3 1 4
-
-
-    -  .. row 1
-
-       -  fe_type
-
-       -  Description
-
-       -  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` equivalent
-	  type
-
-    -  .. row 2
-
-       -  .. _FE-QPSK:
-
-	  ``FE_QPSK``
-
-       -  For DVB-S standard
-
-       -  ``SYS_DVBS``
-
-    -  .. row 3
-
-       -  .. _FE-QAM:
-
-	  ``FE_QAM``
-
-       -  For DVB-C annex A standard
-
-       -  ``SYS_DVBC_ANNEX_A``
-
-    -  .. row 4
-
-       -  .. _FE-OFDM:
-
-	  ``FE_OFDM``
-
-       -  For DVB-T standard
-
-       -  ``SYS_DVBT``
-
-    -  .. row 5
-
-       -  .. _FE-ATSC:
-
-	  ``FE_ATSC``
-
-       -  For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used
-	  in US.
-
-       -  ``SYS_ATSC`` (terrestrial) or ``SYS_DVBC_ANNEX_B`` (cable)
-
-
-Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described
-at the above, as they're supported via the new
-:ref:`FE_GET_PROPERTY/FE_GET_SET_PROPERTY <FE_GET_PROPERTY>`
-ioctl's, using the :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-parameter.
-
-In the old days, struct :c:type:`dvb_frontend_info`
-used to contain ``fe_type_t`` field to indicate the delivery systems,
-filled with either ``FE_QPSK, FE_QAM, FE_OFDM`` or ``FE_ATSC``. While this
-is still filled to keep backward compatibility, the usage of this field
-is deprecated, as it can report just one delivery system, but some
-devices support multiple delivery systems. Please use
-:ref:`DTV_ENUM_DELSYS <DTV-ENUM-DELSYS>` instead.
-
-On devices that support multiple delivery systems, struct
-:c:type:`dvb_frontend_info`::``fe_type_t`` is
-filled with the currently standard, as selected by the last call to
-:ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` using the
-:ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` property.
diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst
deleted file mode 100644
index 2fd2954d8dae..000000000000
--- a/Documentation/media/uapi/dvb/fe_property_parameters.rst
+++ /dev/null
@@ -1,1014 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _fe_property_parameters:
-
-******************************
-Digital TV property parameters
-******************************
-
-There are several different Digital TV parameters that can be used by
-:ref:`FE_SET_PROPERTY and FE_GET_PROPERTY ioctls<FE_GET_PROPERTY>`.
-This section describes each of them. Please notice, however, that only
-a subset of them are needed to setup a frontend.
-
-
-.. _DTV-UNDEFINED:
-
-DTV_UNDEFINED
-=============
-
-Used internally. A GET/SET operation for it won't change or return
-anything.
-
-
-.. _DTV-TUNE:
-
-DTV_TUNE
-========
-
-Interpret the cache of data, build either a traditional frontend
-tunerequest so we can pass validation in the ``FE_SET_FRONTEND`` ioctl.
-
-
-.. _DTV-CLEAR:
-
-DTV_CLEAR
-=========
-
-Reset a cache of data specific to the frontend here. This does not
-effect hardware.
-
-
-.. _DTV-FREQUENCY:
-
-DTV_FREQUENCY
-=============
-
-Frequency of the digital TV transponder/channel.
-
-.. note::
-
-  #. For satellite delivery systems, the frequency is in kHz.
-
-  #. For cable and terrestrial delivery systems, the frequency is in
-     Hz.
-
-  #. On most delivery systems, the frequency is the center frequency
-     of the transponder/channel. The exception is for ISDB-T, where
-     the main carrier has a 1/7 offset from the center.
-
-  #. For ISDB-T, the channels are usually transmitted with an offset of
-     about 143kHz. E.g. a valid frequency could be 474,143 kHz. The
-     stepping is  bound to the bandwidth of the channel which is
-     typically 6MHz.
-
-  #. In ISDB-Tsb, the channel consists of only one or three segments the
-     frequency step is 429kHz, 3*429 respectively.
-
-
-.. _DTV-MODULATION:
-
-DTV_MODULATION
-==============
-
-Specifies the frontend modulation type for delivery systems that
-supports more multiple modulations.
-
-The modulation can be one of the types defined by enum :c:type:`fe_modulation`.
-
-Most of the digital TV standards offers more than one possible
-modulation type.
-
-The table below presents a summary of the types of modulation types
-supported by each delivery system, as currently defined by specs.
-
-======================= =======================================================
-Standard		Modulation types
-======================= =======================================================
-ATSC (version 1)	8-VSB and 16-VSB.
-DMTB			4-QAM, 16-QAM, 32-QAM, 64-QAM and 4-QAM-NR.
-DVB-C Annex A/C		16-QAM, 32-QAM, 64-QAM and 256-QAM.
-DVB-C Annex B		64-QAM.
-DVB-T			QPSK, 16-QAM and 64-QAM.
-DVB-T2			QPSK, 16-QAM, 64-QAM and 256-QAM.
-DVB-S			No need to set. It supports only QPSK.
-DVB-S2			QPSK, 8-PSK, 16-APSK and 32-APSK.
-ISDB-T			QPSK, DQPSK, 16-QAM and 64-QAM.
-ISDB-S			8-PSK, QPSK and BPSK.
-======================= =======================================================
-
-.. note::
-
-   Please notice that some of the above modulation types may not be
-   defined currently at the Kernel. The reason is simple: no driver
-   needed such definition yet.
-
-
-.. _DTV-BANDWIDTH-HZ:
-
-DTV_BANDWIDTH_HZ
-================
-
-Bandwidth for the channel, in HZ.
-
-Should be set only for terrestrial delivery systems.
-
-Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``,
-``8000000``, ``10000000``.
-
-======================= =======================================================
-Terrestrial Standard	Possible values for bandwidth
-======================= =======================================================
-ATSC (version 1)	No need to set. It is always 6MHz.
-DMTB			No need to set. It is always 8MHz.
-DVB-T			6MHz, 7MHz and 8MHz.
-DVB-T2			1.172 MHz, 5MHz, 6MHz, 7MHz, 8MHz and 10MHz
-ISDB-T			5MHz, 6MHz, 7MHz and 8MHz, although most places
-			use 6MHz.
-======================= =======================================================
-
-
-.. note::
-
-
-  #. For ISDB-Tsb, the bandwidth can vary depending on the number of
-     connected segments.
-
-     It can be easily derived from other parameters
-     (DTV_ISDBT_SB_SEGMENT_IDX, DTV_ISDBT_SB_SEGMENT_COUNT).
-
-  #. On Satellite and Cable delivery systems, the bandwidth depends on
-     the symbol rate. So, the Kernel will silently ignore any setting
-     :ref:`DTV-BANDWIDTH-HZ`. I will however fill it back with a
-     bandwidth estimation.
-
-     Such bandwidth estimation takes into account the symbol rate set with
-     :ref:`DTV-SYMBOL-RATE`, and the rolloff factor, with is fixed for
-     DVB-C and DVB-S.
-
-     For DVB-S2, the rolloff should also be set via :ref:`DTV-ROLLOFF`.
-
-
-.. _DTV-INVERSION:
-
-DTV_INVERSION
-=============
-
-Specifies if the frontend should do spectral inversion or not.
-
-The acceptable values are defined by :c:type:`fe_spectral_inversion`.
-
-
-.. _DTV-DISEQC-MASTER:
-
-DTV_DISEQC_MASTER
-=================
-
-Currently not implemented.
-
-
-.. _DTV-SYMBOL-RATE:
-
-DTV_SYMBOL_RATE
-===============
-
-Used on cable and satellite delivery systems.
-
-Digital TV symbol rate, in bauds (symbols/second).
-
-
-.. _DTV-INNER-FEC:
-
-DTV_INNER_FEC
-=============
-
-Used on cable and satellite delivery systems.
-
-The acceptable values are defined by :c:type:`fe_code_rate`.
-
-
-.. _DTV-VOLTAGE:
-
-DTV_VOLTAGE
-===========
-
-Used on satellite delivery systems.
-
-The voltage is usually used with non-DiSEqC capable LNBs to switch the
-polarzation (horizontal/vertical). When using DiSEqC epuipment this
-voltage has to be switched consistently to the DiSEqC commands as
-described in the DiSEqC spec.
-
-The acceptable values are defined by :c:type:`fe_sec_voltage`.
-
-
-.. _DTV-TONE:
-
-DTV_TONE
-========
-
-Currently not used.
-
-
-.. _DTV-PILOT:
-
-DTV_PILOT
-=========
-
-Used on DVB-S2.
-
-Sets DVB-S2 pilot.
-
-The acceptable values are defined by :c:type:`fe_pilot`.
-
-
-.. _DTV-ROLLOFF:
-
-DTV_ROLLOFF
-===========
-
-Used on DVB-S2.
-
-Sets DVB-S2 rolloff.
-
-The acceptable values are defined by :c:type:`fe_rolloff`.
-
-
-.. _DTV-DISEQC-SLAVE-REPLY:
-
-DTV_DISEQC_SLAVE_REPLY
-======================
-
-Currently not implemented.
-
-
-.. _DTV-FE-CAPABILITY-COUNT:
-
-DTV_FE_CAPABILITY_COUNT
-=======================
-
-Currently not implemented.
-
-
-.. _DTV-FE-CAPABILITY:
-
-DTV_FE_CAPABILITY
-=================
-
-Currently not implemented.
-
-
-.. _DTV-DELIVERY-SYSTEM:
-
-DTV_DELIVERY_SYSTEM
-===================
-
-Specifies the type of the delivery system.
-
-The acceptable values are defined by :c:type:`fe_delivery_system`.
-
-
-.. _DTV-ISDBT-PARTIAL-RECEPTION:
-
-DTV_ISDBT_PARTIAL_RECEPTION
-===========================
-
-Used only on ISDB.
-
-If ``DTV_ISDBT_SOUND_BROADCASTING`` is '0' this bit-field represents
-whether the channel is in partial reception mode or not.
-
-If '1' ``DTV_ISDBT_LAYERA_*`` values are assigned to the center segment
-and ``DTV_ISDBT_LAYERA_SEGMENT_COUNT`` has to be '1'.
-
-If in addition ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'
-``DTV_ISDBT_PARTIAL_RECEPTION`` represents whether this ISDB-Tsb channel
-is consisting of one segment and layer or three segments and two layers.
-
-Possible values: 0, 1, -1 (AUTO)
-
-
-.. _DTV-ISDBT-SOUND-BROADCASTING:
-
-DTV_ISDBT_SOUND_BROADCASTING
-============================
-
-Used only on ISDB.
-
-This field represents whether the other DTV_ISDBT_*-parameters are
-referring to an ISDB-T and an ISDB-Tsb channel. (See also
-``DTV_ISDBT_PARTIAL_RECEPTION``).
-
-Possible values: 0, 1, -1 (AUTO)
-
-
-.. _DTV-ISDBT-SB-SUBCHANNEL-ID:
-
-DTV_ISDBT_SB_SUBCHANNEL_ID
-==========================
-
-Used only on ISDB.
-
-This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
-
-(Note of the author: This might not be the correct description of the
-``SUBCHANNEL-ID`` in all details, but it is my understanding of the
-technical background needed to program a device)
-
-An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
-set of connected ISDB-Tsb channels. In this set of channels every
-channel can be received independently. The number of connected ISDB-Tsb
-segment can vary, e.g. depending on the frequency spectrum bandwidth
-available.
-
-Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
-broadcaster has several possibilities to put those channels in the air:
-Assuming a normal 13-segment ISDB-T spectrum he can align the 8 segments
-from position 1-8 to 5-13 or anything in between.
-
-The underlying layer of segments are subchannels: each segment is
-consisting of several subchannels with a predefined IDs. A sub-channel
-is used to help the demodulator to synchronize on the channel.
-
-An ISDB-T channel is always centered over all sub-channels. As for the
-example above, in ISDB-Tsb it is no longer as simple as that.
-
-``The DTV_ISDBT_SB_SUBCHANNEL_ID`` parameter is used to give the
-sub-channel ID of the segment to be demodulated.
-
-Possible values: 0 .. 41, -1 (AUTO)
-
-
-.. _DTV-ISDBT-SB-SEGMENT-IDX:
-
-DTV_ISDBT_SB_SEGMENT_IDX
-========================
-
-Used only on ISDB.
-
-This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
-
-``DTV_ISDBT_SB_SEGMENT_IDX`` gives the index of the segment to be
-demodulated for an ISDB-Tsb channel where several of them are
-transmitted in the connected manner.
-
-Possible values: 0 .. ``DTV_ISDBT_SB_SEGMENT_COUNT`` - 1
-
-Note: This value cannot be determined by an automatic channel search.
-
-
-.. _DTV-ISDBT-SB-SEGMENT-COUNT:
-
-DTV_ISDBT_SB_SEGMENT_COUNT
-==========================
-
-Used only on ISDB.
-
-This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
-
-``DTV_ISDBT_SB_SEGMENT_COUNT`` gives the total count of connected
-ISDB-Tsb channels.
-
-Possible values: 1 .. 13
-
-Note: This value cannot be determined by an automatic channel search.
-
-
-.. _isdb-hierq-layers:
-
-DTV-ISDBT-LAYER[A-C] parameters
-===============================
-
-Used only on ISDB.
-
-ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
-ISDB-T hierarchical layers can be decoded simultaneously. For that
-reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders.
-
-ISDB-T has 3 hierarchical layers which each can use a part of the
-available segments. The total number of segments over all layers has to
-13 in ISDB-T.
-
-There are 3 parameter sets, for Layers A, B and C.
-
-
-.. _DTV-ISDBT-LAYER-ENABLED:
-
-DTV_ISDBT_LAYER_ENABLED
------------------------
-
-Used only on ISDB.
-
-Hierarchical reception in ISDB-T is achieved by enabling or disabling
-layers in the decoding process. Setting all bits of
-``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to
-be demodulated. This is the default.
-
-If the channel is in the partial reception mode
-(``DTV_ISDBT_PARTIAL_RECEPTION`` = 1) the central segment can be decoded
-independently of the other 12 segments. In that mode layer A has to have
-a ``SEGMENT_COUNT`` of 1.
-
-In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according
-to ``DTV_ISDBT_PARTIAL_RECEPTION``. ``SEGMENT_COUNT`` must be filled
-accordingly.
-
-Only the values of the first 3 bits are used. Other bits will be silently ignored:
-
-``DTV_ISDBT_LAYER_ENABLED`` bit 0: layer A enabled
-
-``DTV_ISDBT_LAYER_ENABLED`` bit 1: layer B enabled
-
-``DTV_ISDBT_LAYER_ENABLED`` bit 2: layer C enabled
-
-``DTV_ISDBT_LAYER_ENABLED`` bits 3-31: unused
-
-
-.. _DTV-ISDBT-LAYER-FEC:
-
-DTV_ISDBT_LAYER[A-C]_FEC
-------------------------
-
-Used only on ISDB.
-
-The Forward Error Correction mechanism used by a given ISDB Layer, as
-defined by :c:type:`fe_code_rate`.
-
-
-Possible values are: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``,
-``FEC_5_6``, ``FEC_7_8``
-
-
-.. _DTV-ISDBT-LAYER-MODULATION:
-
-DTV_ISDBT_LAYER[A-C]_MODULATION
--------------------------------
-
-Used only on ISDB.
-
-The modulation used by a given ISDB Layer, as defined by
-:c:type:`fe_modulation`.
-
-Possible values are: ``QAM_AUTO``, ``QPSK``, ``QAM_16``, ``QAM_64``, ``DQPSK``
-
-.. note::
-
-   #. If layer C is ``DQPSK``, then layer B has to be ``DQPSK``.
-
-   #. If layer B is ``DQPSK`` and ``DTV_ISDBT_PARTIAL_RECEPTION``\ = 0,
-      then layer has to be ``DQPSK``.
-
-
-.. _DTV-ISDBT-LAYER-SEGMENT-COUNT:
-
-DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT
-----------------------------------
-
-Used only on ISDB.
-
-Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)
-
-Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and
-``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER[A-C]_SEGMENT_COUNT``
-
-.. _isdbt-layer_seg-cnt-table:
-
-.. flat-table:: Truth table for ISDB-T Sound Broadcasting
-    :header-rows:  1
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  Partial Reception
-
-       -  Sound Broadcasting
-
-       -  Layer A width
-
-       -  Layer B width
-
-       -  Layer C width
-
-       -  total width
-
-    -  .. row 2
-
-       -  0
-
-       -  0
-
-       -  1 .. 13
-
-       -  1 .. 13
-
-       -  1 .. 13
-
-       -  13
-
-    -  .. row 3
-
-       -  1
-
-       -  0
-
-       -  1
-
-       -  1 .. 13
-
-       -  1 .. 13
-
-       -  13
-
-    -  .. row 4
-
-       -  0
-
-       -  1
-
-       -  1
-
-       -  0
-
-       -  0
-
-       -  1
-
-    -  .. row 5
-
-       -  1
-
-       -  1
-
-       -  1
-
-       -  2
-
-       -  0
-
-       -  13
-
-
-
-.. _DTV-ISDBT-LAYER-TIME-INTERLEAVING:
-
-DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING
---------------------------------------
-
-Used only on ISDB.
-
-Valid values: 0, 1, 2, 4, -1 (AUTO)
-
-when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid.
-
-Note: The real time interleaving length depends on the mode (fft-size).
-The values here are referring to what can be found in the
-TMCC-structure, as shown in the table below.
-
-
-.. c:type:: isdbt_layer_interleaving_table
-
-.. flat-table:: ISDB-T time interleaving modes
-    :header-rows:  1
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING``
-
-       -  Mode 1 (2K FFT)
-
-       -  Mode 2 (4K FFT)
-
-       -  Mode 3 (8K FFT)
-
-    -  .. row 2
-
-       -  0
-
-       -  0
-
-       -  0
-
-       -  0
-
-    -  .. row 3
-
-       -  1
-
-       -  4
-
-       -  2
-
-       -  1
-
-    -  .. row 4
-
-       -  2
-
-       -  8
-
-       -  4
-
-       -  2
-
-    -  .. row 5
-
-       -  4
-
-       -  16
-
-       -  8
-
-       -  4
-
-
-
-.. _DTV-ATSCMH-FIC-VER:
-
-DTV_ATSCMH_FIC_VER
-------------------
-
-Used only on ATSC-MH.
-
-Version number of the FIC (Fast Information Channel) signaling data.
-
-FIC is used for relaying information to allow rapid service acquisition
-by the receiver.
-
-Possible values: 0, 1, 2, 3, ..., 30, 31
-
-
-.. _DTV-ATSCMH-PARADE-ID:
-
-DTV_ATSCMH_PARADE_ID
---------------------
-
-Used only on ATSC-MH.
-
-Parade identification number
-
-A parade is a collection of up to eight MH groups, conveying one or two
-ensembles.
-
-Possible values: 0, 1, 2, 3, ..., 126, 127
-
-
-.. _DTV-ATSCMH-NOG:
-
-DTV_ATSCMH_NOG
---------------
-
-Used only on ATSC-MH.
-
-Number of MH groups per MH subframe for a designated parade.
-
-Possible values: 1, 2, 3, 4, 5, 6, 7, 8
-
-
-.. _DTV-ATSCMH-TNOG:
-
-DTV_ATSCMH_TNOG
----------------
-
-Used only on ATSC-MH.
-
-Total number of MH groups including all MH groups belonging to all MH
-parades in one MH subframe.
-
-Possible values: 0, 1, 2, 3, ..., 30, 31
-
-
-.. _DTV-ATSCMH-SGN:
-
-DTV_ATSCMH_SGN
---------------
-
-Used only on ATSC-MH.
-
-Start group number.
-
-Possible values: 0, 1, 2, 3, ..., 14, 15
-
-
-.. _DTV-ATSCMH-PRC:
-
-DTV_ATSCMH_PRC
---------------
-
-Used only on ATSC-MH.
-
-Parade repetition cycle.
-
-Possible values: 1, 2, 3, 4, 5, 6, 7, 8
-
-
-.. _DTV-ATSCMH-RS-FRAME-MODE:
-
-DTV_ATSCMH_RS_FRAME_MODE
-------------------------
-
-Used only on ATSC-MH.
-
-Reed Solomon (RS) frame mode.
-
-The acceptable values are defined by :c:type:`atscmh_rs_frame_mode`.
-
-
-.. _DTV-ATSCMH-RS-FRAME-ENSEMBLE:
-
-DTV_ATSCMH_RS_FRAME_ENSEMBLE
-----------------------------
-
-Used only on ATSC-MH.
-
-Reed Solomon(RS) frame ensemble.
-
-The acceptable values are defined by :c:type:`atscmh_rs_frame_ensemble`.
-
-
-.. _DTV-ATSCMH-RS-CODE-MODE-PRI:
-
-DTV_ATSCMH_RS_CODE_MODE_PRI
----------------------------
-
-Used only on ATSC-MH.
-
-Reed Solomon (RS) code mode (primary).
-
-The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
-
-
-.. _DTV-ATSCMH-RS-CODE-MODE-SEC:
-
-DTV_ATSCMH_RS_CODE_MODE_SEC
----------------------------
-
-Used only on ATSC-MH.
-
-Reed Solomon (RS) code mode (secondary).
-
-The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
-
-
-.. _DTV-ATSCMH-SCCC-BLOCK-MODE:
-
-DTV_ATSCMH_SCCC_BLOCK_MODE
---------------------------
-
-Used only on ATSC-MH.
-
-Series Concatenated Convolutional Code Block Mode.
-
-The acceptable values are defined by :c:type:`atscmh_sccc_block_mode`.
-
-
-.. _DTV-ATSCMH-SCCC-CODE-MODE-A:
-
-DTV_ATSCMH_SCCC_CODE_MODE_A
----------------------------
-
-Used only on ATSC-MH.
-
-Series Concatenated Convolutional Code Rate.
-
-The acceptable values are defined by :c:type:`atscmh_sccc_code_mode`.
-
-.. _DTV-ATSCMH-SCCC-CODE-MODE-B:
-
-DTV_ATSCMH_SCCC_CODE_MODE_B
----------------------------
-
-Used only on ATSC-MH.
-
-Series Concatenated Convolutional Code Rate.
-
-Possible values are the same as documented on enum
-:c:type:`atscmh_sccc_code_mode`.
-
-
-.. _DTV-ATSCMH-SCCC-CODE-MODE-C:
-
-DTV_ATSCMH_SCCC_CODE_MODE_C
----------------------------
-
-Used only on ATSC-MH.
-
-Series Concatenated Convolutional Code Rate.
-
-Possible values are the same as documented on enum
-:c:type:`atscmh_sccc_code_mode`.
-
-
-.. _DTV-ATSCMH-SCCC-CODE-MODE-D:
-
-DTV_ATSCMH_SCCC_CODE_MODE_D
----------------------------
-
-Used only on ATSC-MH.
-
-Series Concatenated Convolutional Code Rate.
-
-Possible values are the same as documented on enum
-:c:type:`atscmh_sccc_code_mode`.
-
-
-.. _DTV-API-VERSION:
-
-DTV_API_VERSION
-===============
-
-Returns the major/minor version of the Digital TV API
-
-
-.. _DTV-CODE-RATE-HP:
-
-DTV_CODE_RATE_HP
-================
-
-Used on terrestrial transmissions.
-
-The acceptable values are defined by :c:type:`fe_transmit_mode`.
-
-
-.. _DTV-CODE-RATE-LP:
-
-DTV_CODE_RATE_LP
-================
-
-Used on terrestrial transmissions.
-
-The acceptable values are defined by :c:type:`fe_transmit_mode`.
-
-
-.. _DTV-GUARD-INTERVAL:
-
-DTV_GUARD_INTERVAL
-==================
-
-The acceptable values are defined by :c:type:`fe_guard_interval`.
-
-.. note::
-
-   #. If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the
-      hardware will try to find the correct guard interval (if capable) and
-      will use TMCC to fill in the missing parameters.
-   #. Intervals ``GUARD_INTERVAL_1_128``, ``GUARD_INTERVAL_19_128``
-      and ``GUARD_INTERVAL_19_256`` are used only for DVB-T2 at
-      present.
-   #. Intervals ``GUARD_INTERVAL_PN420``, ``GUARD_INTERVAL_PN595`` and
-      ``GUARD_INTERVAL_PN945`` are used only for DMTB at the present.
-      On such standard, only those intervals and ``GUARD_INTERVAL_AUTO``
-      are valid.
-
-.. _DTV-TRANSMISSION-MODE:
-
-DTV_TRANSMISSION_MODE
-=====================
-
-
-Used only on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB.
-
-Specifies the FFT size (with corresponds to the approximate number of
-carriers) used by the standard.
-
-The acceptable values are defined by :c:type:`fe_transmit_mode`.
-
-.. note::
-
-   #. ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
-      **mode** on such standard, and are numbered from 1 to 3:
-
-      ====	========	========================
-      Mode	FFT size	Transmission mode
-      ====	========	========================
-      1		2K		``TRANSMISSION_MODE_2K``
-      2		4K		``TRANSMISSION_MODE_4K``
-      3		8K		``TRANSMISSION_MODE_8K``
-      ====	========	========================
-
-   #. If ``DTV_TRANSMISSION_MODE`` is set the ``TRANSMISSION_MODE_AUTO``
-      the hardware will try to find the correct FFT-size (if capable) and
-      will use TMCC to fill in the missing parameters.
-
-   #. DVB-T specifies 2K and 8K as valid sizes.
-
-   #. DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.
-
-   #. DTMB specifies C1 and C3780.
-
-
-.. _DTV-HIERARCHY:
-
-DTV_HIERARCHY
-=============
-
-Used only on DVB-T and DVB-T2.
-
-Frontend hierarchy.
-
-The acceptable values are defined by :c:type:`fe_hierarchy`.
-
-
-.. _DTV-STREAM-ID:
-
-DTV_STREAM_ID
-=============
-
-Used on DVB-S2, DVB-T2 and ISDB-S.
-
-DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on
-a single transport stream. This property enables the digital TV driver to
-handle substream filtering, when supported by the hardware. By default,
-substream filtering is disabled.
-
-For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255.
-
-For ISDB, the valid substream id range is from 1 to 65535.
-
-To disable it, you should use the special macro NO_STREAM_ID_FILTER.
-
-Note: any value outside the id range also disables filtering.
-
-
-.. _DTV-DVBT2-PLP-ID-LEGACY:
-
-DTV_DVBT2_PLP_ID_LEGACY
-=======================
-
-Obsolete, replaced with DTV_STREAM_ID.
-
-
-.. _DTV-ENUM-DELSYS:
-
-DTV_ENUM_DELSYS
-===============
-
-A Multi standard frontend needs to advertise the delivery systems
-provided. Applications need to enumerate the provided delivery systems,
-before using any other operation with the frontend. Prior to it's
-introduction, FE_GET_INFO was used to determine a frontend type. A
-frontend which provides more than a single delivery system,
-FE_GET_INFO doesn't help much. Applications which intends to use a
-multistandard frontend must enumerate the delivery systems associated
-with it, rather than trying to use FE_GET_INFO. In the case of a
-legacy frontend, the result is just the same as with FE_GET_INFO, but
-in a more structured format
-
-The acceptable values are defined by :c:type:`fe_delivery_system`.
-
-
-.. _DTV-INTERLEAVING:
-
-DTV_INTERLEAVING
-================
-
-Time interleaving to be used.
-
-The acceptable values are defined by :c:type:`fe_interleaving`.
-
-
-.. _DTV-LNA:
-
-DTV_LNA
-=======
-
-Low-noise amplifier.
-
-Hardware might offer controllable LNA which can be set manually using
-that parameter. Usually LNA could be found only from terrestrial devices
-if at all.
-
-Possible values: 0, 1, LNA_AUTO
-
-0, LNA off
-
-1, LNA on
-
-use the special macro LNA_AUTO to set LNA auto
-
-
-.. _DTV-SCRAMBLING-SEQUENCE-INDEX:
-
-DTV_SCRAMBLING_SEQUENCE_INDEX
-=============================
-
-Used on DVB-S2.
-
-This 18 bit field, when present, carries the index of the DVB-S2 physical
-layer scrambling sequence as defined in clause 5.5.4 of EN 302 307.
-There is no explicit signalling method to convey scrambling sequence index
-to the receiver. If S2 satellite delivery system descriptor is available
-it can be used to read the scrambling sequence index (EN 300 468 table 41).
-
-By default, gold scrambling sequence index 0 is used.
-
-The valid scrambling sequence index range is from 0 to 262142.
diff --git a/Documentation/media/uapi/dvb/frontend-header.rst b/Documentation/media/uapi/dvb/frontend-header.rst
deleted file mode 100644
index 635fb4251214..000000000000
--- a/Documentation/media/uapi/dvb/frontend-header.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-Frontend uAPI data types
-========================
-
-.. kernel-doc:: include/uapi/linux/dvb/frontend.h
diff --git a/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst b/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst
deleted file mode 100644
index 97fbfc228c10..000000000000
--- a/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst
+++ /dev/null
@@ -1,82 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend-property-cable-systems:
-
-*****************************************
-Properties used on cable delivery systems
-*****************************************
-
-
-.. _dvbc-params:
-
-DVB-C delivery system
-=====================
-
-The DVB-C Annex-A is the widely used cable standard. Transmission uses
-QAM modulation.
-
-The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It
-supports a subset of the Annex A modulation types, and a roll-off of
-0.13, instead of 0.15
-
-The following parameters are valid for DVB-C Annex A/C:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_MODULATION <DTV-MODULATION>`
-
--  :ref:`DTV_INVERSION <DTV-INVERSION>`
-
--  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>`
-
--  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
-
--  :ref:`DTV_LNA <DTV-LNA>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
-
-
-.. _dvbc-annex-b-params:
-
-DVB-C Annex B delivery system
-=============================
-
-The DVB-C Annex-B is only used on a few Countries like the United
-States.
-
-The following parameters are valid for DVB-C Annex B:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_MODULATION <DTV-MODULATION>`
-
--  :ref:`DTV_INVERSION <DTV-INVERSION>`
-
--  :ref:`DTV_LNA <DTV-LNA>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
diff --git a/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst b/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst
deleted file mode 100644
index 2bc880a3c826..000000000000
--- a/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst
+++ /dev/null
@@ -1,112 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend-property-satellite-systems:
-
-*********************************************
-Properties used on satellite delivery systems
-*********************************************
-
-
-.. _dvbs-params:
-
-DVB-S delivery system
-=====================
-
-The following parameters are valid for DVB-S:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_INVERSION <DTV-INVERSION>`
-
--  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>`
-
--  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
-
--  :ref:`DTV_VOLTAGE <DTV-VOLTAGE>`
-
--  :ref:`DTV_TONE <DTV-TONE>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
-
-Future implementations might add those two missing parameters:
-
--  :ref:`DTV_DISEQC_MASTER <DTV-DISEQC-MASTER>`
-
--  :ref:`DTV_DISEQC_SLAVE_REPLY <DTV-DISEQC-SLAVE-REPLY>`
-
-
-.. _dvbs2-params:
-
-DVB-S2 delivery system
-======================
-
-In addition to all parameters valid for DVB-S, DVB-S2 supports the
-following parameters:
-
--  :ref:`DTV_MODULATION <DTV-MODULATION>`
-
--  :ref:`DTV_PILOT <DTV-PILOT>`
-
--  :ref:`DTV_ROLLOFF <DTV-ROLLOFF>`
-
--  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
-
--  :ref:`DTV_SCRAMBLING_SEQUENCE_INDEX <DTV-SCRAMBLING-SEQUENCE-INDEX>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
-
-
-.. _turbo-params:
-
-Turbo code delivery system
-==========================
-
-In addition to all parameters valid for DVB-S, turbo code supports the
-following parameters:
-
--  :ref:`DTV_MODULATION <DTV-MODULATION>`
-
-
-.. _isdbs-params:
-
-ISDB-S delivery system
-======================
-
-The following parameters are valid for ISDB-S:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_INVERSION <DTV-INVERSION>`
-
--  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>`
-
--  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
-
--  :ref:`DTV_VOLTAGE <DTV-VOLTAGE>`
-
--  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
diff --git a/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst b/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst
deleted file mode 100644
index c20af13297e5..000000000000
--- a/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst
+++ /dev/null
@@ -1,301 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend-property-terrestrial-systems:
-
-***********************************************
-Properties used on terrestrial delivery systems
-***********************************************
-
-
-.. _dvbt-params:
-
-DVB-T delivery system
-=====================
-
-The following parameters are valid for DVB-T:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_MODULATION <DTV-MODULATION>`
-
--  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
-
--  :ref:`DTV_INVERSION <DTV-INVERSION>`
-
--  :ref:`DTV_CODE_RATE_HP <DTV-CODE-RATE-HP>`
-
--  :ref:`DTV_CODE_RATE_LP <DTV-CODE-RATE-LP>`
-
--  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
-
--  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
-
--  :ref:`DTV_HIERARCHY <DTV-HIERARCHY>`
-
--  :ref:`DTV_LNA <DTV-LNA>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
-
-
-.. _dvbt2-params:
-
-DVB-T2 delivery system
-======================
-
-DVB-T2 support is currently in the early stages of development, so
-expect that this section maygrow and become more detailed with time.
-
-The following parameters are valid for DVB-T2:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_MODULATION <DTV-MODULATION>`
-
--  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
-
--  :ref:`DTV_INVERSION <DTV-INVERSION>`
-
--  :ref:`DTV_CODE_RATE_HP <DTV-CODE-RATE-HP>`
-
--  :ref:`DTV_CODE_RATE_LP <DTV-CODE-RATE-LP>`
-
--  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
-
--  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
-
--  :ref:`DTV_HIERARCHY <DTV-HIERARCHY>`
-
--  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
-
--  :ref:`DTV_LNA <DTV-LNA>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
-
-
-.. _isdbt:
-
-ISDB-T delivery system
-======================
-
-This ISDB-T/ISDB-Tsb API extension should reflect all information needed
-to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible that some
-very sophisticated devices won't need certain parameters to tune.
-
-The information given here should help application writers to know how
-to handle ISDB-T and ISDB-Tsb hardware using the Linux Digital TV API.
-
-The details given here about ISDB-T and ISDB-Tsb are just enough to
-basically show the dependencies between the needed parameter values, but
-surely some information is left out. For more detailed information see
-the following documents:
-
-ARIB STD-B31 - "Transmission System for Digital Terrestrial Television
-Broadcasting" and
-
-ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial Television
-Broadcasting".
-
-In order to understand the ISDB specific parameters, one has to have
-some knowledge the channel structure in ISDB-T and ISDB-Tsb. I.e. it has
-to be known to the reader that an ISDB-T channel consists of 13
-segments, that it can have up to 3 layer sharing those segments, and
-things like that.
-
-The following parameters are valid for ISDB-T:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
-
--  :ref:`DTV_INVERSION <DTV-INVERSION>`
-
--  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
-
--  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
-
--  :ref:`DTV_ISDBT_LAYER_ENABLED <DTV-ISDBT-LAYER-ENABLED>`
-
--  :ref:`DTV_ISDBT_PARTIAL_RECEPTION <DTV-ISDBT-PARTIAL-RECEPTION>`
-
--  :ref:`DTV_ISDBT_SOUND_BROADCASTING <DTV-ISDBT-SOUND-BROADCASTING>`
-
--  :ref:`DTV_ISDBT_SB_SUBCHANNEL_ID <DTV-ISDBT-SB-SUBCHANNEL-ID>`
-
--  :ref:`DTV_ISDBT_SB_SEGMENT_IDX <DTV-ISDBT-SB-SEGMENT-IDX>`
-
--  :ref:`DTV_ISDBT_SB_SEGMENT_COUNT <DTV-ISDBT-SB-SEGMENT-COUNT>`
-
--  :ref:`DTV_ISDBT_LAYERA_FEC <DTV-ISDBT-LAYER-FEC>`
-
--  :ref:`DTV_ISDBT_LAYERA_MODULATION <DTV-ISDBT-LAYER-MODULATION>`
-
--  :ref:`DTV_ISDBT_LAYERA_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>`
-
--  :ref:`DTV_ISDBT_LAYERA_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>`
-
--  :ref:`DTV_ISDBT_LAYERB_FEC <DTV-ISDBT-LAYER-FEC>`
-
--  :ref:`DTV_ISDBT_LAYERB_MODULATION <DTV-ISDBT-LAYER-MODULATION>`
-
--  :ref:`DTV_ISDBT_LAYERB_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>`
-
--  :ref:`DTV_ISDBT_LAYERB_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>`
-
--  :ref:`DTV_ISDBT_LAYERC_FEC <DTV-ISDBT-LAYER-FEC>`
-
--  :ref:`DTV_ISDBT_LAYERC_MODULATION <DTV-ISDBT-LAYER-MODULATION>`
-
--  :ref:`DTV_ISDBT_LAYERC_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>`
-
--  :ref:`DTV_ISDBT_LAYERC_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
-
-
-.. _atsc-params:
-
-ATSC delivery system
-====================
-
-The following parameters are valid for ATSC:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_MODULATION <DTV-MODULATION>`
-
--  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
-
-
-.. _atscmh-params:
-
-ATSC-MH delivery system
-=======================
-
-The following parameters are valid for ATSC-MH:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
-
--  :ref:`DTV_ATSCMH_FIC_VER <DTV-ATSCMH-FIC-VER>`
-
--  :ref:`DTV_ATSCMH_PARADE_ID <DTV-ATSCMH-PARADE-ID>`
-
--  :ref:`DTV_ATSCMH_NOG <DTV-ATSCMH-NOG>`
-
--  :ref:`DTV_ATSCMH_TNOG <DTV-ATSCMH-TNOG>`
-
--  :ref:`DTV_ATSCMH_SGN <DTV-ATSCMH-SGN>`
-
--  :ref:`DTV_ATSCMH_PRC <DTV-ATSCMH-PRC>`
-
--  :ref:`DTV_ATSCMH_RS_FRAME_MODE <DTV-ATSCMH-RS-FRAME-MODE>`
-
--  :ref:`DTV_ATSCMH_RS_FRAME_ENSEMBLE <DTV-ATSCMH-RS-FRAME-ENSEMBLE>`
-
--  :ref:`DTV_ATSCMH_RS_CODE_MODE_PRI <DTV-ATSCMH-RS-CODE-MODE-PRI>`
-
--  :ref:`DTV_ATSCMH_RS_CODE_MODE_SEC <DTV-ATSCMH-RS-CODE-MODE-SEC>`
-
--  :ref:`DTV_ATSCMH_SCCC_BLOCK_MODE <DTV-ATSCMH-SCCC-BLOCK-MODE>`
-
--  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_A <DTV-ATSCMH-SCCC-CODE-MODE-A>`
-
--  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_B <DTV-ATSCMH-SCCC-CODE-MODE-B>`
-
--  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_C <DTV-ATSCMH-SCCC-CODE-MODE-C>`
-
--  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_D <DTV-ATSCMH-SCCC-CODE-MODE-D>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
-
-
-.. _dtmb-params:
-
-DTMB delivery system
-====================
-
-The following parameters are valid for DTMB:
-
--  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
-
--  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
-
--  :ref:`DTV_TUNE <DTV-TUNE>`
-
--  :ref:`DTV_CLEAR <DTV-CLEAR>`
-
--  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
-
--  :ref:`DTV_MODULATION <DTV-MODULATION>`
-
--  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
-
--  :ref:`DTV_INVERSION <DTV-INVERSION>`
-
--  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
-
--  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
-
--  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
-
--  :ref:`DTV_INTERLEAVING <DTV-INTERLEAVING>`
-
--  :ref:`DTV_LNA <DTV-LNA>`
-
-In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
-are also valid.
diff --git a/Documentation/media/uapi/dvb/frontend-stat-properties.rst b/Documentation/media/uapi/dvb/frontend-stat-properties.rst
deleted file mode 100644
index 546464db04b5..000000000000
--- a/Documentation/media/uapi/dvb/frontend-stat-properties.rst
+++ /dev/null
@@ -1,252 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend-stat-properties:
-
-******************************
-Frontend statistics indicators
-******************************
-
-The values are returned via ``dtv_property.stat``. If the property is
-supported, ``dtv_property.stat.len`` is bigger than zero.
-
-For most delivery systems, ``dtv_property.stat.len`` will be 1 if the
-stats is supported, and the properties will return a single value for
-each parameter.
-
-It should be noted, however, that new OFDM delivery systems like ISDB
-can use different modulation types for each group of carriers. On such
-standards, up to 3 groups of statistics can be provided, and
-``dtv_property.stat.len`` is updated to reflect the "global" metrics,
-plus one metric per each carrier group (called "layer" on ISDB).
-
-So, in order to be consistent with other delivery systems, the first
-value at :c:type:`dtv_property.stat.dtv_stats <dtv_stats>` array refers
-to the global metric. The other elements of the array represent each
-layer, starting from layer A(index 1), layer B (index 2) and so on.
-
-The number of filled elements are stored at ``dtv_property.stat.len``.
-
-Each element of the ``dtv_property.stat.dtv_stats`` array consists on
-two elements:
-
--  ``svalue`` or ``uvalue``, where ``svalue`` is for signed values of
-   the measure (dB measures) and ``uvalue`` is for unsigned values
-   (counters, relative scale)
-
--  ``scale`` - Scale for the value. It can be:
-
-   -  ``FE_SCALE_NOT_AVAILABLE`` - The parameter is supported by the
-      frontend, but it was not possible to collect it (could be a
-      transitory or permanent condition)
-
-   -  ``FE_SCALE_DECIBEL`` - parameter is a signed value, measured in
-      1/1000 dB
-
-   -  ``FE_SCALE_RELATIVE`` - parameter is a unsigned value, where 0
-      means 0% and 65535 means 100%.
-
-   -  ``FE_SCALE_COUNTER`` - parameter is a unsigned value that counts
-      the occurrence of an event, like bit error, block error, or lapsed
-      time.
-
-
-.. _DTV-STAT-SIGNAL-STRENGTH:
-
-DTV_STAT_SIGNAL_STRENGTH
-========================
-
-Indicates the signal strength level at the analog part of the tuner or
-of the demod.
-
-Possible scales for this metric are:
-
--  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
-   measurement was not complete yet.
-
--  ``FE_SCALE_DECIBEL`` - signal strength is in 0.001 dBm units, power
-   measured in miliwatts. This value is generally negative.
-
--  ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100%
-   measurement for power (actually, 0 to 65535).
-
-
-.. _DTV-STAT-CNR:
-
-DTV_STAT_CNR
-============
-
-Indicates the Signal to Noise ratio for the main carrier.
-
-Possible scales for this metric are:
-
--  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
-   measurement was not complete yet.
-
--  ``FE_SCALE_DECIBEL`` - Signal/Noise ratio is in 0.001 dB units.
-
--  ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100%
-   measurement for Signal/Noise (actually, 0 to 65535).
-
-
-.. _DTV-STAT-PRE-ERROR-BIT-COUNT:
-
-DTV_STAT_PRE_ERROR_BIT_COUNT
-============================
-
-Measures the number of bit errors before the forward error correction
-(FEC) on the inner coding block (before Viterbi, LDPC or other inner
-code).
-
-This measure is taken during the same interval as
-``DTV_STAT_PRE_TOTAL_BIT_COUNT``.
-
-In order to get the BER (Bit Error Rate) measurement, it should be
-divided by
-:ref:`DTV_STAT_PRE_TOTAL_BIT_COUNT <DTV-STAT-PRE-TOTAL-BIT-COUNT>`.
-
-This measurement is monotonically increased, as the frontend gets more
-bit count measurements. The frontend may reset it when a
-channel/transponder is tuned.
-
-Possible scales for this metric are:
-
--  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
-   measurement was not complete yet.
-
--  ``FE_SCALE_COUNTER`` - Number of error bits counted before the inner
-   coding.
-
-
-.. _DTV-STAT-PRE-TOTAL-BIT-COUNT:
-
-DTV_STAT_PRE_TOTAL_BIT_COUNT
-============================
-
-Measures the amount of bits received before the inner code block, during
-the same period as
-:ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`
-measurement was taken.
-
-It should be noted that this measurement can be smaller than the total
-amount of bits on the transport stream, as the frontend may need to
-manually restart the measurement, losing some data between each
-measurement interval.
-
-This measurement is monotonically increased, as the frontend gets more
-bit count measurements. The frontend may reset it when a
-channel/transponder is tuned.
-
-Possible scales for this metric are:
-
--  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
-   measurement was not complete yet.
-
--  ``FE_SCALE_COUNTER`` - Number of bits counted while measuring
-   :ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`.
-
-
-.. _DTV-STAT-POST-ERROR-BIT-COUNT:
-
-DTV_STAT_POST_ERROR_BIT_COUNT
-=============================
-
-Measures the number of bit errors after the forward error correction
-(FEC) done by inner code block (after Viterbi, LDPC or other inner
-code).
-
-This measure is taken during the same interval as
-``DTV_STAT_POST_TOTAL_BIT_COUNT``.
-
-In order to get the BER (Bit Error Rate) measurement, it should be
-divided by
-:ref:`DTV_STAT_POST_TOTAL_BIT_COUNT <DTV-STAT-POST-TOTAL-BIT-COUNT>`.
-
-This measurement is monotonically increased, as the frontend gets more
-bit count measurements. The frontend may reset it when a
-channel/transponder is tuned.
-
-Possible scales for this metric are:
-
--  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
-   measurement was not complete yet.
-
--  ``FE_SCALE_COUNTER`` - Number of error bits counted after the inner
-   coding.
-
-
-.. _DTV-STAT-POST-TOTAL-BIT-COUNT:
-
-DTV_STAT_POST_TOTAL_BIT_COUNT
-=============================
-
-Measures the amount of bits received after the inner coding, during the
-same period as
-:ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`
-measurement was taken.
-
-It should be noted that this measurement can be smaller than the total
-amount of bits on the transport stream, as the frontend may need to
-manually restart the measurement, losing some data between each
-measurement interval.
-
-This measurement is monotonically increased, as the frontend gets more
-bit count measurements. The frontend may reset it when a
-channel/transponder is tuned.
-
-Possible scales for this metric are:
-
--  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
-   measurement was not complete yet.
-
--  ``FE_SCALE_COUNTER`` - Number of bits counted while measuring
-   :ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`.
-
-
-.. _DTV-STAT-ERROR-BLOCK-COUNT:
-
-DTV_STAT_ERROR_BLOCK_COUNT
-==========================
-
-Measures the number of block errors after the outer forward error
-correction coding (after Reed-Solomon or other outer code).
-
-This measurement is monotonically increased, as the frontend gets more
-bit count measurements. The frontend may reset it when a
-channel/transponder is tuned.
-
-Possible scales for this metric are:
-
--  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
-   measurement was not complete yet.
-
--  ``FE_SCALE_COUNTER`` - Number of error blocks counted after the outer
-   coding.
-
-
-.. _DTV-STAT-TOTAL-BLOCK-COUNT:
-
-DTV-STAT_TOTAL_BLOCK_COUNT
-==========================
-
-Measures the total number of blocks received during the same period as
-:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`
-measurement was taken.
-
-It can be used to calculate the PER indicator, by dividing
-:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>` by
-:ref:`DTV-STAT-TOTAL-BLOCK-COUNT`.
-
-Possible scales for this metric are:
-
--  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
-   measurement was not complete yet.
-
--  ``FE_SCALE_COUNTER`` - Number of blocks counted while measuring
-   :ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`.
diff --git a/Documentation/media/uapi/dvb/frontend.rst b/Documentation/media/uapi/dvb/frontend.rst
deleted file mode 100644
index 7ff225dfe11c..000000000000
--- a/Documentation/media/uapi/dvb/frontend.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dvb_frontend:
-
-#######################
-Digital TV Frontend API
-#######################
-
-The Digital TV frontend API was designed to support three groups of delivery
-systems: Terrestrial, cable and Satellite. Currently, the following
-delivery systems are supported:
-
--  Terrestrial systems: DVB-T, DVB-T2, ATSC, ATSC M/H, ISDB-T, DVB-H,
-   DTMB, CMMB
-
--  Cable systems: DVB-C Annex A/C, ClearQAM (DVB-C Annex B)
-
--  Satellite systems: DVB-S, DVB-S2, DVB Turbo, ISDB-S, DSS
-
-The Digital TV frontend controls several sub-devices including:
-
--  Tuner
-
--  Digital TV demodulator
-
--  Low noise amplifier (LNA)
-
--  Satellite Equipment Control (SEC) [#f1]_.
-
-The frontend can be accessed through ``/dev/dvb/adapter?/frontend?``.
-Data types and ioctl definitions can be accessed by including
-``linux/dvb/frontend.h`` in your application.
-
-.. note::
-
-   Transmission via the internet (DVB-IP) and MMT (MPEG Media Transport)
-   is not yet handled by this API but a future extension is possible.
-
-.. [#f1]
-
-   On Satellite systems, the API support for the Satellite Equipment
-   Control (SEC) allows to power control and to send/receive signals to
-   control the antenna subsystem, selecting the polarization and choosing
-   the Intermediate Frequency IF) of the Low Noise Block Converter Feed
-   Horn (LNBf). It supports the DiSEqC and V-SEC protocols. The DiSEqC
-   (digital SEC) specification is available at
-   `Eutelsat <http://www.eutelsat.com/satellites/4_5_5.html>`__.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    query-dvb-frontend-info
-    dvb-fe-read-status
-    dvbproperty
-    frontend_fcalls
diff --git a/Documentation/media/uapi/dvb/frontend_f_close.rst b/Documentation/media/uapi/dvb/frontend_f_close.rst
deleted file mode 100644
index af87c2a83719..000000000000
--- a/Documentation/media/uapi/dvb/frontend_f_close.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend_f_close:
-
-***************************
-Digital TV frontend close()
-***************************
-
-Name
-====
-
-fe-close - Close a frontend device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-
-
-.. c:function:: int close( int fd )
-    :name: dvb-fe-close
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
-
-
-Description
-===========
-
-This system call closes a previously opened front-end device. After
-closing a front-end device, its corresponding hardware might be powered
-down automatically.
-
-
-Return Value
-============
-
-On success 0 is returned.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-Generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/frontend_f_open.rst b/Documentation/media/uapi/dvb/frontend_f_open.rst
deleted file mode 100644
index 6a46ec5acf7b..000000000000
--- a/Documentation/media/uapi/dvb/frontend_f_open.rst
+++ /dev/null
@@ -1,117 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend_f_open:
-
-***************************
-Digital TV frontend open()
-***************************
-
-Name
-====
-
-fe-open - Open a frontend device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <fcntl.h>
-
-
-.. c:function:: int open( const char *device_name, int flags )
-    :name: dvb-fe-open
-
-Arguments
-=========
-
-``device_name``
-    Device to be opened.
-
-``flags``
-    Open flags. Access can either be ``O_RDWR`` or ``O_RDONLY``.
-
-    Multiple opens are allowed with ``O_RDONLY``. In this mode, only
-    query and read ioctls are allowed.
-
-    Only one open is allowed in ``O_RDWR``. In this mode, all ioctls are
-    allowed.
-
-    When the ``O_NONBLOCK`` flag is given, the system calls may return
-    ``EAGAIN`` error code when no data is available or when the device
-    driver is temporarily busy.
-
-    Other flags have no effect.
-
-
-Description
-===========
-
-This system call opens a named frontend device
-(``/dev/dvb/adapter?/frontend?``) for subsequent use. Usually the first
-thing to do after a successful open is to find out the frontend type
-with :ref:`FE_GET_INFO`.
-
-The device can be opened in read-only mode, which only allows monitoring
-of device status and statistics, or read/write mode, which allows any
-kind of use (e.g. performing tuning operations.)
-
-In a system with multiple front-ends, it is usually the case that
-multiple devices cannot be open in read/write mode simultaneously. As
-long as a front-end device is opened in read/write mode, other open()
-calls in read/write mode will either fail or block, depending on whether
-non-blocking or blocking mode was specified. A front-end device opened
-in blocking mode can later be put into non-blocking mode (and vice
-versa) using the F_SETFL command of the fcntl system call. This is a
-standard system call, documented in the Linux manual page for fcntl.
-When an open() call has succeeded, the device will be ready for use in
-the specified mode. This implies that the corresponding hardware is
-powered up, and that other front-ends may have been powered down to make
-that possible.
-
-
-Return Value
-============
-
-On success :ref:`open() <frontend_f_open>` returns the new file descriptor.
-On error, -1 is returned, and the ``errno`` variable is set appropriately.
-
-Possible error codes are:
-
-
-On success 0 is returned, and :c:type:`ca_slot_info` is filled.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-    -  - ``EPERM``
-       -  The caller has no permission to access the device.
-
-    -  - ``EBUSY``
-       -  The the device driver is already in use.
-
-    -  - ``EMFILE``
-       -  The process already has the maximum number of files open.
-
-    -  - ``ENFILE``
-       -  The limit on the total number of files open on the system has been
-	  reached.
-
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/frontend_fcalls.rst b/Documentation/media/uapi/dvb/frontend_fcalls.rst
deleted file mode 100644
index 9b3586f538ea..000000000000
--- a/Documentation/media/uapi/dvb/frontend_fcalls.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend_fcalls:
-
-#######################
-Frontend Function Calls
-#######################
-
-.. toctree::
-    :maxdepth: 1
-
-    frontend_f_open
-    frontend_f_close
-    fe-get-info
-    fe-read-status
-    fe-get-property
-    fe-diseqc-reset-overload
-    fe-diseqc-send-master-cmd
-    fe-diseqc-recv-slave-reply
-    fe-diseqc-send-burst
-    fe-set-tone
-    fe-set-voltage
-    fe-enable-high-lnb-voltage
-    fe-set-frontend-tune-mode
diff --git a/Documentation/media/uapi/dvb/frontend_legacy_api.rst b/Documentation/media/uapi/dvb/frontend_legacy_api.rst
deleted file mode 100644
index 1ea749d09ca2..000000000000
--- a/Documentation/media/uapi/dvb/frontend_legacy_api.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend_legacy_types:
-
-Frontend Legacy Data Types
-==========================
-
-
-.. toctree::
-    :maxdepth: 1
-
-    fe-type-t
-    fe-bandwidth-t
-    dvb-frontend-parameters
-    dvb-frontend-event
-
-
-.. _frontend_legacy_fcalls:
-
-Frontend Legacy Function Calls
-==============================
-
-Those functions are defined at DVB version 3. The support is kept in the
-kernel due to compatibility issues only. Their usage is strongly not
-recommended
-
-
-.. toctree::
-    :maxdepth: 1
-
-    fe-read-ber
-    fe-read-snr
-    fe-read-signal-strength
-    fe-read-uncorrected-blocks
-    fe-set-frontend
-    fe-get-frontend
-    fe-get-event
-    fe-dishnetwork-send-legacy-cmd
diff --git a/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst b/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst
deleted file mode 100644
index 1567bc73855a..000000000000
--- a/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _frontend_legacy_dvbv3_api:
-
-***********************************************
-Digital TV Frontend legacy API (a. k. a. DVBv3)
-***********************************************
-
-The usage of this API is deprecated, as it doesn't support all digital
-TV standards, doesn't provide good statistics measurements and provides
-incomplete information. This is kept only to support legacy
-applications.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    frontend_legacy_api
diff --git a/Documentation/media/uapi/dvb/headers.rst b/Documentation/media/uapi/dvb/headers.rst
deleted file mode 100644
index edeabd9e8e90..000000000000
--- a/Documentation/media/uapi/dvb/headers.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-****************************
-Digital TV uAPI header files
-****************************
-
-Digital TV uAPI headers
-***********************
-
-.. kernel-include:: $BUILDDIR/frontend.h.rst
-
-.. kernel-include:: $BUILDDIR/dmx.h.rst
-
-.. kernel-include:: $BUILDDIR/ca.h.rst
-
-.. kernel-include:: $BUILDDIR/net.h.rst
-
-Legacy uAPI
-***********
-
-.. kernel-include:: $BUILDDIR/audio.h.rst
-
-.. kernel-include:: $BUILDDIR/video.h.rst
diff --git a/Documentation/media/uapi/dvb/intro.rst b/Documentation/media/uapi/dvb/intro.rst
deleted file mode 100644
index f1384616ac4e..000000000000
--- a/Documentation/media/uapi/dvb/intro.rst
+++ /dev/null
@@ -1,190 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dvb_introdution:
-
-************
-Introduction
-************
-
-
-.. _requisites:
-
-What you need to know
-=====================
-
-The reader of this document is required to have some knowledge in the
-area of digital video broadcasting (Digital TV) and should be familiar with
-part I of the MPEG2 specification ISO/IEC 13818 (aka ITU-T H.222), i.e
-you should know what a program/transport stream (PS/TS) is and what is
-meant by a packetized elementary stream (PES) or an I-frame.
-
-Various Digital TV standards documents are available for download at:
-
-- European standards (DVB): http://www.dvb.org and/or http://www.etsi.org.
-- American standards (ATSC): https://www.atsc.org/standards/
-- Japanese standards (ISDB): http://www.dibeg.org/
-
-It is also necessary to know how to access Linux devices and how to
-use ioctl calls. This also includes the knowledge of C or C++.
-
-
-.. _history:
-
-History
-=======
-
-The first API for Digital TV cards we used at Convergence in late 1999 was an
-extension of the Video4Linux API which was primarily developed for frame
-grabber cards. As such it was not really well suited to be used for Digital
-TV cards and their new features like recording MPEG streams and filtering
-several section and PES data streams at the same time.
-
-In early 2000, Convergence was approached by Nokia with a proposal for a new
-standard Linux Digital TV API. As a commitment to the development of terminals
-based on open standards, Nokia and Convergence made it available to all
-Linux developers and published it on https://linuxtv.org in September
-2000. With the Linux driver for the Siemens/Hauppauge DVB PCI card,
-Convergence provided a first implementation of the Linux Digital TV API.
-Convergence was the maintainer of the Linux Digital TV API in the early
-days.
-
-Now, the API is maintained by the LinuxTV community (i.e. you, the reader
-of this document). The Linux  Digital TV API is constantly reviewed and
-improved together with the improvements at the subsystem's core at the
-Kernel.
-
-
-.. _overview:
-
-Overview
-========
-
-
-.. _stb_components:
-
-.. kernel-figure:: dvbstb.svg
-    :alt:   dvbstb.svg
-    :align: center
-
-    Components of a Digital TV card/STB
-
-A Digital TV card or set-top-box (STB) usually consists of the
-following main hardware components:
-
-Frontend consisting of tuner and digital TV demodulator
-   Here the raw signal reaches the digital TV hardware from a satellite dish or
-   antenna or directly from cable. The frontend down-converts and
-   demodulates this signal into an MPEG transport stream (TS). In case
-   of a satellite frontend, this includes a facility for satellite
-   equipment control (SEC), which allows control of LNB polarization,
-   multi feed switches or dish rotors.
-
-Conditional Access (CA) hardware like CI adapters and smartcard slots
-   The complete TS is passed through the CA hardware. Programs to which
-   the user has access (controlled by the smart card) are decoded in
-   real time and re-inserted into the TS.
-
-   .. note::
-
-      Not every digital TV hardware provides conditional access hardware.
-
-Demultiplexer which filters the incoming Digital TV MPEG-TS stream
-   The demultiplexer splits the TS into its components like audio and
-   video streams. Besides usually several of such audio and video
-   streams it also contains data streams with information about the
-   programs offered in this or other streams of the same provider.
-
-Audio and video decoder
-   The main targets of the demultiplexer are audio and video
-   decoders. After decoding, they pass on the uncompressed audio and
-   video to the computer screen or to a TV set.
-
-   .. note::
-
-      Modern hardware usually doesn't have a separate decoder hardware, as
-      such functionality can be provided by the main CPU, by the graphics
-      adapter of the system or by a signal processing hardware embedded on
-      a Systems on a Chip (SoC) integrated circuit.
-
-      It may also not be needed for certain usages (e.g. for data-only
-      uses like “internet over satellite”).
-
-:ref:`stb_components` shows a crude schematic of the control and data
-flow between those components.
-
-
-
-.. _dvb_devices:
-
-Linux Digital TV Devices
-========================
-
-The Linux Digital TV API lets you control these hardware components through
-currently six Unix-style character devices for video, audio, frontend,
-demux, CA and IP-over-DVB networking. The video and audio devices
-control the MPEG2 decoder hardware, the frontend device the tuner and
-the Digital TV demodulator. The demux device gives you control over the PES
-and section filters of the hardware. If the hardware does not support
-filtering these filters can be implemented in software. Finally, the CA
-device controls all the conditional access capabilities of the hardware.
-It can depend on the individual security requirements of the platform,
-if and how many of the CA functions are made available to the
-application through this device.
-
-All devices can be found in the ``/dev`` tree under ``/dev/dvb``. The
-individual devices are called:
-
--  ``/dev/dvb/adapterN/audioM``,
-
--  ``/dev/dvb/adapterN/videoM``,
-
--  ``/dev/dvb/adapterN/frontendM``,
-
--  ``/dev/dvb/adapterN/netM``,
-
--  ``/dev/dvb/adapterN/demuxM``,
-
--  ``/dev/dvb/adapterN/dvrM``,
-
--  ``/dev/dvb/adapterN/caM``,
-
-where ``N`` enumerates the Digital TV cards in a system starting from 0, and
-``M`` enumerates the devices of each type within each adapter, starting
-from 0, too. We will omit the “``/dev/dvb/adapterN/``\ ” in the further
-discussion of these devices.
-
-More details about the data structures and function calls of all the
-devices are described in the following chapters.
-
-
-.. _include_files:
-
-API include files
-=================
-
-For each of the Digital TV devices a corresponding include file exists. The
-Digital TV API include files should be included in application sources with a
-partial path like:
-
-
-.. code-block:: c
-
-	#include <linux/dvb/ca.h>
-
-	#include <linux/dvb/dmx.h>
-
-	#include <linux/dvb/frontend.h>
-
-	#include <linux/dvb/net.h>
-
-
-To enable applications to support different API version, an additional
-include file ``linux/dvb/version.h`` exists, which defines the constant
-``DVB_API_VERSION``. This document describes ``DVB_API_VERSION 5.10``.
diff --git a/Documentation/media/uapi/dvb/legacy_dvb_apis.rst b/Documentation/media/uapi/dvb/legacy_dvb_apis.rst
deleted file mode 100644
index a43b4c36d935..000000000000
--- a/Documentation/media/uapi/dvb/legacy_dvb_apis.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _legacy_dvb_apis:
-
-***************************
-Digital TV Deprecated APIs
-***************************
-
-The APIs described here **should not** be used on new drivers or applications.
-
-The DVBv3 frontend API has issues with new delivery systems, including
-DVB-S2, DVB-T2, ISDB, etc.
-
-There's just one driver for a very legacy hardware using the Digital TV
-audio and video APIs. No modern drivers should use it. Instead, audio and
-video should be using the V4L2 and ALSA APIs, and the pipelines should
-be set via the Media Controller API.
-
-.. attention::
-
-   The APIs described here doesn't necessarily reflect the current
-   code implementation, as this section of the document was written
-   for DVB version 1, while the code reflects DVB version 3
-   implementation.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    frontend_legacy_dvbv3_api
-    video
-    audio
diff --git a/Documentation/media/uapi/dvb/net-add-if.rst b/Documentation/media/uapi/dvb/net-add-if.rst
deleted file mode 100644
index 1188641b453e..000000000000
--- a/Documentation/media/uapi/dvb/net-add-if.rst
+++ /dev/null
@@ -1,60 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _NET_ADD_IF:
-
-****************
-ioctl NET_ADD_IF
-****************
-
-Name
-====
-
-NET_ADD_IF - Creates a new network interface for a given Packet ID.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, NET_ADD_IF, struct dvb_net_if *net_if )
-    :name: NET_ADD_IF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``net_if``
-    pointer to struct :c:type:`dvb_net_if`
-
-
-Description
-===========
-
-The NET_ADD_IF ioctl system call selects the Packet ID (PID) that
-contains a TCP/IP traffic, the type of encapsulation to be used (MPE or
-ULE) and the interface number for the new interface to be created. When
-the system call successfully returns, a new virtual network interface is
-created.
-
-The struct :c:type:`dvb_net_if`::ifnum field will be
-filled with the number of the created interface.
-
-Return Value
-============
-
-On success 0 is returned, and :c:type:`ca_slot_info` is filled.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/net-get-if.rst b/Documentation/media/uapi/dvb/net-get-if.rst
deleted file mode 100644
index 7c4ef4b9d6cc..000000000000
--- a/Documentation/media/uapi/dvb/net-get-if.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _NET_GET_IF:
-
-****************
-ioctl NET_GET_IF
-****************
-
-Name
-====
-
-NET_GET_IF - Read the configuration data of an interface created via - :ref:`NET_ADD_IF <net>`.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, NET_GET_IF, struct dvb_net_if *net_if )
-    :name: NET_GET_IF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``net_if``
-    pointer to struct :c:type:`dvb_net_if`
-
-
-Description
-===========
-
-The NET_GET_IF ioctl uses the interface number given by the struct
-:c:type:`dvb_net_if`::ifnum field and fills the content of
-struct :c:type:`dvb_net_if` with the packet ID and
-encapsulation type used on such interface. If the interface was not
-created yet with :ref:`NET_ADD_IF <net>`, it will return -1 and fill
-the ``errno`` with ``EINVAL`` error code.
-
-
-Return Value
-============
-
-On success 0 is returned, and :c:type:`ca_slot_info` is filled.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/net-remove-if.rst b/Documentation/media/uapi/dvb/net-remove-if.rst
deleted file mode 100644
index bf9a1602eeec..000000000000
--- a/Documentation/media/uapi/dvb/net-remove-if.rst
+++ /dev/null
@@ -1,55 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _NET_REMOVE_IF:
-
-*******************
-ioctl NET_REMOVE_IF
-*******************
-
-Name
-====
-
-NET_REMOVE_IF - Removes a network interface.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, NET_REMOVE_IF, int ifnum )
-    :name: NET_REMOVE_IF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <frontend_f_open>`.
-
-``net_if``
-    number of the interface to be removed
-
-
-Description
-===========
-
-The NET_REMOVE_IF ioctl deletes an interface previously created via
-:ref:`NET_ADD_IF <net>`.
-
-
-Return Value
-============
-
-On success 0 is returned, and :c:type:`ca_slot_info` is filled.
-
-On error -1 is returned, and the ``errno`` variable is set
-appropriately.
-
-The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/net-types.rst b/Documentation/media/uapi/dvb/net-types.rst
deleted file mode 100644
index 9e16462a1ef4..000000000000
--- a/Documentation/media/uapi/dvb/net-types.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _net_types:
-
-**************
-Net Data Types
-**************
-
-.. kernel-doc:: include/uapi/linux/dvb/net.h
diff --git a/Documentation/media/uapi/dvb/net.rst b/Documentation/media/uapi/dvb/net.rst
deleted file mode 100644
index 833daa381968..000000000000
--- a/Documentation/media/uapi/dvb/net.rst
+++ /dev/null
@@ -1,48 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _net:
-
-######################
-Digital TV Network API
-######################
-
-The Digital TV net device controls the mapping of data packages that are part
-of a transport stream to be mapped into a virtual network interface,
-visible through the standard Linux network protocol stack.
-
-Currently, two encapsulations are supported:
-
--  `Multi Protocol Encapsulation (MPE) <http://en.wikipedia.org/wiki/Multiprotocol_Encapsulation>`__
-
--  `Ultra Lightweight Encapsulation (ULE) <http://en.wikipedia.org/wiki/Unidirectional_Lightweight_Encapsulation>`__
-
-In order to create the Linux virtual network interfaces, an application
-needs to tell to the Kernel what are the PIDs and the encapsulation
-types that are present on the transport stream. This is done through
-``/dev/dvb/adapter?/net?`` device node. The data will be available via
-virtual ``dvb?_?`` network interfaces, and will be controlled/routed via
-the standard ip tools (like ip, route, netstat, ifconfig, etc).
-
-Data types and and ioctl definitions are defined via ``linux/dvb/net.h``
-header.
-
-
-.. _net_fcalls:
-
-Digital TV net Function Calls
-#############################
-
-.. toctree::
-    :maxdepth: 1
-
-    net-types
-    net-add-if
-    net-remove-if
-    net-get-if
diff --git a/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst b/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst
deleted file mode 100644
index 9a6badc1d295..000000000000
--- a/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _query-dvb-frontend-info:
-
-*****************************
-Querying frontend information
-*****************************
-
-Usually, the first thing to do when the frontend is opened is to check
-the frontend capabilities. This is done using
-:ref:`FE_GET_INFO`. This ioctl will enumerate the
-Digital TV API version and other characteristics about the frontend, and can
-be opened either in read only or read/write mode.
diff --git a/Documentation/media/uapi/dvb/video-clear-buffer.rst b/Documentation/media/uapi/dvb/video-clear-buffer.rst
deleted file mode 100644
index 5eb5546e8ce4..000000000000
--- a/Documentation/media/uapi/dvb/video-clear-buffer.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_CLEAR_BUFFER:
-
-==================
-VIDEO_CLEAR_BUFFER
-==================
-
-Name
-----
-
-VIDEO_CLEAR_BUFFER
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_CLEAR_BUFFER)
-    :name: VIDEO_CLEAR_BUFFER
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_CLEAR_BUFFER for this command.
-
-
-Description
------------
-
-This ioctl call clears all video buffers in the driver and in the
-decoder hardware.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-command.rst b/Documentation/media/uapi/dvb/video-command.rst
deleted file mode 100644
index 020b49645c6b..000000000000
--- a/Documentation/media/uapi/dvb/video-command.rst
+++ /dev/null
@@ -1,105 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_COMMAND:
-
-=============
-VIDEO_COMMAND
-=============
-
-Name
-----
-
-VIDEO_COMMAND
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, VIDEO_COMMAND, struct video_command *cmd)
-    :name: VIDEO_COMMAND
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_COMMAND for this command.
-
-    -  .. row 3
-
-       -  struct video_command \*cmd
-
-       -  Commands the decoder.
-
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
-this ioctl has been replaced by the
-:ref:`VIDIOC_DECODER_CMD` ioctl.
-
-This ioctl commands the decoder. The ``video_command`` struct is a
-subset of the ``v4l2_decoder_cmd`` struct, so refer to the
-:ref:`VIDIOC_DECODER_CMD` documentation for
-more information.
-
-.. c:type:: struct video_command
-
-.. code-block:: c
-
-	/* The structure must be zeroed before use by the application
-	This ensures it can be extended safely in the future. */
-	struct video_command {
-		__u32 cmd;
-		__u32 flags;
-		union {
-			struct {
-				__u64 pts;
-			} stop;
-
-			struct {
-				/* 0 or 1000 specifies normal speed,
-				1 specifies forward single stepping,
-				-1 specifies backward single stepping,
-				>1: playback at speed/1000 of the normal speed,
-				<-1: reverse playback at (-speed/1000) of the normal speed. */
-				__s32 speed;
-				__u32 format;
-			} play;
-
-			struct {
-				__u32 data[16];
-			} raw;
-		};
-	};
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-continue.rst b/Documentation/media/uapi/dvb/video-continue.rst
deleted file mode 100644
index 2ae2067dfba8..000000000000
--- a/Documentation/media/uapi/dvb/video-continue.rst
+++ /dev/null
@@ -1,66 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_CONTINUE:
-
-==============
-VIDEO_CONTINUE
-==============
-
-Name
-----
-
-VIDEO_CONTINUE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_CONTINUE)
-    :name: VIDEO_CONTINUE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_CONTINUE for this command.
-
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
-
-This ioctl call restarts decoding and playing processes of the video
-stream which was played before a call to VIDEO_FREEZE was made.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-fast-forward.rst b/Documentation/media/uapi/dvb/video-fast-forward.rst
deleted file mode 100644
index 3f805f334ae1..000000000000
--- a/Documentation/media/uapi/dvb/video-fast-forward.rst
+++ /dev/null
@@ -1,83 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_FAST_FORWARD:
-
-==================
-VIDEO_FAST_FORWARD
-==================
-
-Name
-----
-
-VIDEO_FAST_FORWARD
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_FAST_FORWARD, int nFrames)
-    :name: VIDEO_FAST_FORWARD
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_FAST_FORWARD for this command.
-
-    -  .. row 3
-
-       -  int nFrames
-
-       -  The number of frames to skip.
-
-
-Description
------------
-
-This ioctl call asks the Video Device to skip decoding of N number of
-I-frames. This call can only be used if VIDEO_SOURCE_MEMORY is
-selected.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EPERM``
-
-       -  Mode VIDEO_SOURCE_MEMORY not selected.
diff --git a/Documentation/media/uapi/dvb/video-fclose.rst b/Documentation/media/uapi/dvb/video-fclose.rst
deleted file mode 100644
index 3b0285b96a3c..000000000000
--- a/Documentation/media/uapi/dvb/video-fclose.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _video_fclose:
-
-=================
-dvb video close()
-=================
-
-Name
-----
-
-dvb video close()
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int close(int fd)
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-
-Description
------------
-
-This system call closes a previously opened video device.
-
-
-Return Value
-------------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EBADF``
-
-       -  fd is not a valid open file descriptor.
diff --git a/Documentation/media/uapi/dvb/video-fopen.rst b/Documentation/media/uapi/dvb/video-fopen.rst
deleted file mode 100644
index 7b2a8c750e6a..000000000000
--- a/Documentation/media/uapi/dvb/video-fopen.rst
+++ /dev/null
@@ -1,122 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _video_fopen:
-
-================
-dvb video open()
-================
-
-Name
-----
-
-dvb video open()
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int open(const char *deviceName, int flags)
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  const char \*deviceName
-
-       -  Name of specific video device.
-
-    -  .. row 2
-
-       -  int flags
-
-       -  A bit-wise OR of the following flags:
-
-    -  .. row 3
-
-       -
-       -  O_RDONLY read-only access
-
-    -  .. row 4
-
-       -
-       -  O_RDWR read/write access
-
-    -  .. row 5
-
-       -
-       -  O_NONBLOCK open in non-blocking mode
-
-    -  .. row 6
-
-       -
-       -  (blocking mode is the default)
-
-
-Description
------------
-
-This system call opens a named video device (e.g.
-/dev/dvb/adapter0/video0) for subsequent use.
-
-When an open() call has succeeded, the device will be ready for use. The
-significance of blocking or non-blocking mode is described in the
-documentation for functions where there is a difference. It does not
-affect the semantics of the open() call itself. A device opened in
-blocking mode can later be put into non-blocking mode (and vice versa)
-using the F_SETFL command of the fcntl system call. This is a standard
-system call, documented in the Linux manual page for fcntl. Only one
-user can open the Video Device in O_RDWR mode. All other attempts to
-open the device in this mode will fail, and an error-code will be
-returned. If the Video Device is opened in O_RDONLY mode, the only
-ioctl call that can be used is VIDEO_GET_STATUS. All other call will
-return an error code.
-
-
-Return Value
-------------
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``ENODEV``
-
-       -  Device driver not loaded/available.
-
-    -  .. row 2
-
-       -  ``EINTERNAL``
-
-       -  Internal error.
-
-    -  .. row 3
-
-       -  ``EBUSY``
-
-       -  Device or resource busy.
-
-    -  .. row 4
-
-       -  ``EINVAL``
-
-       -  Invalid argument.
diff --git a/Documentation/media/uapi/dvb/video-freeze.rst b/Documentation/media/uapi/dvb/video-freeze.rst
deleted file mode 100644
index 6b31a4755d2c..000000000000
--- a/Documentation/media/uapi/dvb/video-freeze.rst
+++ /dev/null
@@ -1,70 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_FREEZE:
-
-============
-VIDEO_FREEZE
-============
-
-Name
-----
-
-VIDEO_FREEZE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_FREEZE)
-    :name: VIDEO_FREEZE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_FREEZE for this command.
-
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
-
-This ioctl call suspends the live video stream being played. Decoding
-and playing are frozen. It is then possible to restart the decoding and
-playing process of the video stream using the VIDEO_CONTINUE command.
-If VIDEO_SOURCE_MEMORY is selected in the ioctl call
-VIDEO_SELECT_SOURCE, the Digital TV subsystem will not decode any more data
-until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-fwrite.rst b/Documentation/media/uapi/dvb/video-fwrite.rst
deleted file mode 100644
index eb35b79eb85c..000000000000
--- a/Documentation/media/uapi/dvb/video-fwrite.rst
+++ /dev/null
@@ -1,90 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _video_fwrite:
-
-=================
-dvb video write()
-=================
-
-Name
-----
-
-dvb video write()
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: size_t write(int fd, const void *buf, size_t count)
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  void \*buf
-
-       -  Pointer to the buffer containing the PES data.
-
-    -  .. row 3
-
-       -  size_t count
-
-       -  Size of buf.
-
-
-Description
------------
-
-This system call can only be used if VIDEO_SOURCE_MEMORY is selected
-in the ioctl call VIDEO_SELECT_SOURCE. The data provided shall be in
-PES format, unless the capability allows other formats. If O_NONBLOCK
-is not specified the function will block until buffer space is
-available. The amount of data to be transferred is implied by count.
-
-
-Return Value
-------------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EPERM``
-
-       -  Mode VIDEO_SOURCE_MEMORY not selected.
-
-    -  .. row 2
-
-       -  ``ENOMEM``
-
-       -  Attempted to write more data than the internal buffer can hold.
-
-    -  .. row 3
-
-       -  ``EBADF``
-
-       -  fd is not a valid open file descriptor.
diff --git a/Documentation/media/uapi/dvb/video-get-capabilities.rst b/Documentation/media/uapi/dvb/video-get-capabilities.rst
deleted file mode 100644
index 971fdab70e15..000000000000
--- a/Documentation/media/uapi/dvb/video-get-capabilities.rst
+++ /dev/null
@@ -1,70 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_GET_CAPABILITIES:
-
-======================
-VIDEO_GET_CAPABILITIES
-======================
-
-Name
-----
-
-VIDEO_GET_CAPABILITIES
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_GET_CAPABILITIES, unsigned int *cap)
-    :name: VIDEO_GET_CAPABILITIES
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_GET_CAPABILITIES for this command.
-
-    -  .. row 3
-
-       -  unsigned int \*cap
-
-       -  Pointer to a location where to store the capability information.
-
-
-Description
------------
-
-This ioctl call asks the video device about its decoding capabilities.
-On success it returns and integer which has bits set according to the
-defines in section ??.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-get-event.rst b/Documentation/media/uapi/dvb/video-get-event.rst
deleted file mode 100644
index 7f03fbe3d3b0..000000000000
--- a/Documentation/media/uapi/dvb/video-get-event.rst
+++ /dev/null
@@ -1,114 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_GET_EVENT:
-
-===============
-VIDEO_GET_EVENT
-===============
-
-Name
-----
-
-VIDEO_GET_EVENT
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_GET_EVENT, struct video_event *ev)
-    :name: VIDEO_GET_EVENT
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_GET_EVENT for this command.
-
-    -  .. row 3
-
-       -  struct video_event \*ev
-
-       -  Points to the location where the event, if any, is to be stored.
-
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To get events from a V4L2 decoder
-use the V4L2 :ref:`VIDIOC_DQEVENT` ioctl instead.
-
-This ioctl call returns an event of type video_event if available. If
-an event is not available, the behavior depends on whether the device is
-in blocking or non-blocking mode. In the latter case, the call fails
-immediately with errno set to ``EWOULDBLOCK``. In the former case, the call
-blocks until an event becomes available. The standard Linux poll()
-and/or select() system calls can be used with the device file descriptor
-to watch for new events. For select(), the file descriptor should be
-included in the exceptfds argument, and for poll(), POLLPRI should be
-specified as the wake-up condition. Read-only permissions are sufficient
-for this ioctl call.
-
-.. c:type:: video_event
-
-.. code-block:: c
-
-	struct video_event {
-		__s32 type;
-	#define VIDEO_EVENT_SIZE_CHANGED	1
-	#define VIDEO_EVENT_FRAME_RATE_CHANGED	2
-	#define VIDEO_EVENT_DECODER_STOPPED 	3
-	#define VIDEO_EVENT_VSYNC 		4
-		long timestamp;
-		union {
-			video_size_t size;
-			unsigned int frame_rate;	/* in frames per 1000sec */
-			unsigned char vsync_field;	/* unknown/odd/even/progressive */
-		} u;
-	};
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EWOULDBLOCK``
-
-       -  There is no event pending, and the device is in non-blocking mode.
-
-    -  .. row 2
-
-       -  ``EOVERFLOW``
-
-       -  Overflow in event queue - one or more events were lost.
diff --git a/Documentation/media/uapi/dvb/video-get-frame-count.rst b/Documentation/media/uapi/dvb/video-get-frame-count.rst
deleted file mode 100644
index ef35da7d4861..000000000000
--- a/Documentation/media/uapi/dvb/video-get-frame-count.rst
+++ /dev/null
@@ -1,74 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_GET_FRAME_COUNT:
-
-=====================
-VIDEO_GET_FRAME_COUNT
-=====================
-
-Name
-----
-
-VIDEO_GET_FRAME_COUNT
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, VIDEO_GET_FRAME_COUNT, __u64 *pts)
-    :name: VIDEO_GET_FRAME_COUNT
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_GET_FRAME_COUNT for this command.
-
-    -  .. row 3
-
-       -  __u64 \*pts
-
-       -  Returns the number of frames displayed since the decoder was
-	  started.
-
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
-this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_FRAME``
-control.
-
-This ioctl call asks the Video Device to return the number of displayed
-frames since the decoder was started.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-get-pts.rst b/Documentation/media/uapi/dvb/video-get-pts.rst
deleted file mode 100644
index 86ceefff7834..000000000000
--- a/Documentation/media/uapi/dvb/video-get-pts.rst
+++ /dev/null
@@ -1,78 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_GET_PTS:
-
-=============
-VIDEO_GET_PTS
-=============
-
-Name
-----
-
-VIDEO_GET_PTS
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, VIDEO_GET_PTS, __u64 *pts)
-    :name: VIDEO_GET_PTS
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_GET_PTS for this command.
-
-    -  .. row 3
-
-       -  __u64 \*pts
-
-       -  Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 /
-	  ISO/IEC 13818-1.
-
-	  The PTS should belong to the currently played frame if possible,
-	  but may also be a value close to it like the PTS of the last
-	  decoded frame or the last PTS extracted by the PES parser.
-
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
-this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_PTS``
-control.
-
-This ioctl call asks the Video Device to return the current PTS
-timestamp.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-get-size.rst b/Documentation/media/uapi/dvb/video-get-size.rst
deleted file mode 100644
index cc92189d31fd..000000000000
--- a/Documentation/media/uapi/dvb/video-get-size.rst
+++ /dev/null
@@ -1,78 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_GET_SIZE:
-
-==============
-VIDEO_GET_SIZE
-==============
-
-Name
-----
-
-VIDEO_GET_SIZE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, VIDEO_GET_SIZE, video_size_t *size)
-    :name: VIDEO_GET_SIZE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_GET_SIZE for this command.
-
-    -  .. row 3
-
-       -  video_size_t \*size
-
-       -  Returns the size and aspect ratio.
-
-
-Description
------------
-
-This ioctl returns the size and aspect ratio.
-
-.. c:type:: video_size_t
-
-.. code-block::c
-
-	typedef struct {
-		int w;
-		int h;
-		video_format_t aspect_ratio;
-	} video_size_t;
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-get-status.rst b/Documentation/media/uapi/dvb/video-get-status.rst
deleted file mode 100644
index 8bfcf8fc3e19..000000000000
--- a/Documentation/media/uapi/dvb/video-get-status.rst
+++ /dev/null
@@ -1,80 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_GET_STATUS:
-
-================
-VIDEO_GET_STATUS
-================
-
-Name
-----
-
-VIDEO_GET_STATUS
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_GET_STATUS, struct video_status *status)
-    :name: VIDEO_GET_STATUS
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_GET_STATUS for this command.
-
-    -  .. row 3
-
-       -  struct video_status \*status
-
-       -  Returns the current status of the Video Device.
-
-
-Description
------------
-
-This ioctl call asks the Video Device to return the current status of
-the device.
-
-.. c:type:: video_status
-
-.. code-block:: c
-
-	struct video_status {
-		int                   video_blank;   /* blank video on freeze? */
-		video_play_state_t    play_state;    /* current state of playback */
-		video_stream_source_t stream_source; /* current source (demux/memory) */
-		video_format_t        video_format;  /* current aspect ratio of stream*/
-		video_displayformat_t display_format;/* selected cropping mode */
-	};
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-play.rst b/Documentation/media/uapi/dvb/video-play.rst
deleted file mode 100644
index fb3f4f168814..000000000000
--- a/Documentation/media/uapi/dvb/video-play.rst
+++ /dev/null
@@ -1,66 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_PLAY:
-
-==========
-VIDEO_PLAY
-==========
-
-Name
-----
-
-VIDEO_PLAY
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_PLAY)
-    :name: VIDEO_PLAY
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_PLAY for this command.
-
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
-
-This ioctl call asks the Video Device to start playing a video stream
-from the selected source.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-select-source.rst b/Documentation/media/uapi/dvb/video-select-source.rst
deleted file mode 100644
index 32cf025356dc..000000000000
--- a/Documentation/media/uapi/dvb/video-select-source.rst
+++ /dev/null
@@ -1,84 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_SELECT_SOURCE:
-
-===================
-VIDEO_SELECT_SOURCE
-===================
-
-Name
-----
-
-VIDEO_SELECT_SOURCE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_SELECT_SOURCE, video_stream_source_t source)
-    :name: VIDEO_SELECT_SOURCE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_SELECT_SOURCE for this command.
-
-    -  .. row 3
-
-       -  video_stream_source_t source
-
-       -  Indicates which source shall be used for the Video stream.
-
-
-Description
------------
-
-This ioctl is for Digital TV devices only. This ioctl was also supported by the
-V4L2 ivtv driver, but that has been replaced by the ivtv-specific
-``IVTV_IOC_PASSTHROUGH_MODE`` ioctl.
-
-This ioctl call informs the video device which source shall be used for
-the input data. The possible sources are demux or memory. If memory is
-selected, the data is fed to the video device through the write command.
-
-.. c:type:: video_stream_source_t
-
-.. code-block:: c
-
-	typedef enum {
-		VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
-		VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
-				comes from the user through the write
-				system call */
-	} video_stream_source_t;
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-set-blank.rst b/Documentation/media/uapi/dvb/video-set-blank.rst
deleted file mode 100644
index 901c3c80f167..000000000000
--- a/Documentation/media/uapi/dvb/video-set-blank.rst
+++ /dev/null
@@ -1,73 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_SET_BLANK:
-
-===============
-VIDEO_SET_BLANK
-===============
-
-Name
-----
-
-VIDEO_SET_BLANK
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_SET_BLANK, boolean mode)
-    :name: VIDEO_SET_BLANK
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_SET_BLANK for this command.
-
-    -  .. row 3
-
-       -  boolean mode
-
-       -  TRUE: Blank screen when stop.
-
-    -  .. row 4
-
-       -
-       -  FALSE: Show last decoded frame.
-
-
-Description
------------
-
-This ioctl call asks the Video Device to blank out the picture.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-set-display-format.rst b/Documentation/media/uapi/dvb/video-set-display-format.rst
deleted file mode 100644
index ffdefa341207..000000000000
--- a/Documentation/media/uapi/dvb/video-set-display-format.rst
+++ /dev/null
@@ -1,69 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_SET_DISPLAY_FORMAT:
-
-========================
-VIDEO_SET_DISPLAY_FORMAT
-========================
-
-Name
-----
-
-VIDEO_SET_DISPLAY_FORMAT
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_SET_DISPLAY_FORMAT)
-    :name: VIDEO_SET_DISPLAY_FORMAT
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_SET_DISPLAY_FORMAT for this command.
-
-    -  .. row 3
-
-       -  video_display_format_t format
-
-       -  Selects the video format to be used.
-
-
-Description
------------
-
-This ioctl call asks the Video Device to select the video format to be
-applied by the MPEG chip on the video.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-set-format.rst b/Documentation/media/uapi/dvb/video-set-format.rst
deleted file mode 100644
index 63e60214ab37..000000000000
--- a/Documentation/media/uapi/dvb/video-set-format.rst
+++ /dev/null
@@ -1,92 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_SET_FORMAT:
-
-================
-VIDEO_SET_FORMAT
-================
-
-Name
-----
-
-VIDEO_SET_FORMAT
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_SET_FORMAT, video_format_t format)
-    :name: VIDEO_SET_FORMAT
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_SET_FORMAT for this command.
-
-    -  .. row 3
-
-       -  video_format_t format
-
-       -  video format of TV as defined in section ??.
-
-
-Description
------------
-
-This ioctl sets the screen format (aspect ratio) of the connected output
-device (TV) so that the output of the decoder can be adjusted
-accordingly.
-
-.. c:type:: video_format_t
-
-.. code-block:: c
-
-	typedef enum {
-		VIDEO_FORMAT_4_3,     /* Select 4:3 format */
-		VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
-		VIDEO_FORMAT_221_1    /* 2.21:1 */
-	} video_format_t;
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EINVAL``
-
-       -  format is not a valid video format.
diff --git a/Documentation/media/uapi/dvb/video-set-streamtype.rst b/Documentation/media/uapi/dvb/video-set-streamtype.rst
deleted file mode 100644
index 845486a6e049..000000000000
--- a/Documentation/media/uapi/dvb/video-set-streamtype.rst
+++ /dev/null
@@ -1,70 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_SET_STREAMTYPE:
-
-====================
-VIDEO_SET_STREAMTYPE
-====================
-
-Name
-----
-
-VIDEO_SET_STREAMTYPE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_SET_STREAMTYPE, int type)
-    :name: VIDEO_SET_STREAMTYPE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_SET_STREAMTYPE for this command.
-
-    -  .. row 3
-
-       -  int type
-
-       -  stream type
-
-
-Description
------------
-
-This ioctl tells the driver which kind of stream to expect being written
-to it. If this call is not used the default of video PES is used. Some
-drivers might not support this call and always expect PES.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-slowmotion.rst b/Documentation/media/uapi/dvb/video-slowmotion.rst
deleted file mode 100644
index 32c934aaf2ba..000000000000
--- a/Documentation/media/uapi/dvb/video-slowmotion.rst
+++ /dev/null
@@ -1,83 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_SLOWMOTION:
-
-================
-VIDEO_SLOWMOTION
-================
-
-Name
-----
-
-VIDEO_SLOWMOTION
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_SLOWMOTION, int nFrames)
-    :name: VIDEO_SLOWMOTION
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_SLOWMOTION for this command.
-
-    -  .. row 3
-
-       -  int nFrames
-
-       -  The number of times to repeat each frame.
-
-
-Description
------------
-
-This ioctl call asks the video device to repeat decoding frames N number
-of times. This call can only be used if VIDEO_SOURCE_MEMORY is
-selected.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EPERM``
-
-       -  Mode VIDEO_SOURCE_MEMORY not selected.
diff --git a/Documentation/media/uapi/dvb/video-stillpicture.rst b/Documentation/media/uapi/dvb/video-stillpicture.rst
deleted file mode 100644
index 58035a7630e6..000000000000
--- a/Documentation/media/uapi/dvb/video-stillpicture.rst
+++ /dev/null
@@ -1,70 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_STILLPICTURE:
-
-==================
-VIDEO_STILLPICTURE
-==================
-
-Name
-----
-
-VIDEO_STILLPICTURE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_STILLPICTURE, struct video_still_picture *sp)
-    :name: VIDEO_STILLPICTURE
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_STILLPICTURE for this command.
-
-    -  .. row 3
-
-       -  struct video_still_picture \*sp
-
-       -  Pointer to a location where an I-frame and size is stored.
-
-
-Description
------------
-
-This ioctl call asks the Video Device to display a still picture
-(I-frame). The input data shall contain an I-frame. If the pointer is
-NULL, then the current displayed still picture is blanked.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-stop.rst b/Documentation/media/uapi/dvb/video-stop.rst
deleted file mode 100644
index 732ace05e34b..000000000000
--- a/Documentation/media/uapi/dvb/video-stop.rst
+++ /dev/null
@@ -1,83 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_STOP:
-
-==========
-VIDEO_STOP
-==========
-
-Name
-----
-
-VIDEO_STOP
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(fd, VIDEO_STOP, boolean mode)
-    :name: VIDEO_STOP
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_STOP for this command.
-
-    -  .. row 3
-
-       -  Boolean mode
-
-       -  Indicates how the screen shall be handled.
-
-    -  .. row 4
-
-       -
-       -  TRUE: Blank screen when stop.
-
-    -  .. row 5
-
-       -
-       -  FALSE: Show last decoded frame.
-
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
-
-This ioctl call asks the Video Device to stop playing the current
-stream. Depending on the input parameter, the screen can be blanked out
-or displaying the last decoded frame.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video-try-command.rst b/Documentation/media/uapi/dvb/video-try-command.rst
deleted file mode 100644
index 37ecf8e91eb8..000000000000
--- a/Documentation/media/uapi/dvb/video-try-command.rst
+++ /dev/null
@@ -1,75 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDEO_TRY_COMMAND:
-
-=================
-VIDEO_TRY_COMMAND
-=================
-
-Name
-----
-
-VIDEO_TRY_COMMAND
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int ioctl(int fd, VIDEO_TRY_COMMAND, struct video_command *cmd)
-    :name: VIDEO_TRY_COMMAND
-
-
-Arguments
----------
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals VIDEO_TRY_COMMAND for this command.
-
-    -  .. row 3
-
-       -  struct video_command \*cmd
-
-       -  Try a decoder command.
-
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
-this ioctl has been replaced by the
-:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` ioctl.
-
-This ioctl tries a decoder command. The ``video_command`` struct is a
-subset of the ``v4l2_decoder_cmd`` struct, so refer to the
-:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` documentation
-for more information.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/dvb/video.rst b/Documentation/media/uapi/dvb/video.rst
deleted file mode 100644
index 6d72ed0e2b2d..000000000000
--- a/Documentation/media/uapi/dvb/video.rst
+++ /dev/null
@@ -1,43 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dvb_video:
-
-#######################
-Digital TV Video Device
-#######################
-
-The Digital TV video device controls the MPEG2 video decoder of the Digital
-TV hardware. It can be accessed through **/dev/dvb/adapter0/video0**. Data
-types and and ioctl definitions can be accessed by including
-**linux/dvb/video.h** in your application.
-
-Note that the Digital TV video device only controls decoding of the MPEG video
-stream, not its presentation on the TV or computer screen. On PCs this
-is typically handled by an associated video4linux device, e.g.
-**/dev/video**, which allows scaling and defining output windows.
-
-Some Digital TV cards don’t have their own MPEG decoder, which results in the
-omission of the audio and video device as well as the video4linux
-device.
-
-The ioctls that deal with SPUs (sub picture units) and navigation
-packets are only supported on some MPEG decoders made for DVD playback.
-
-These ioctls were also used by V4L2 to control MPEG decoders implemented
-in V4L2. The use of these ioctls for that purpose has been made obsolete
-and proper V4L2 ioctls or controls have been created to replace that
-functionality.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    video_types
-    video_function_calls
diff --git a/Documentation/media/uapi/dvb/video_function_calls.rst b/Documentation/media/uapi/dvb/video_function_calls.rst
deleted file mode 100644
index 9e8e49e52b19..000000000000
--- a/Documentation/media/uapi/dvb/video_function_calls.rst
+++ /dev/null
@@ -1,42 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _video_function_calls:
-
-********************
-Video Function Calls
-********************
-
-.. toctree::
-    :maxdepth: 1
-
-    video-fopen
-    video-fclose
-    video-fwrite
-    video-stop
-    video-play
-    video-freeze
-    video-continue
-    video-select-source
-    video-set-blank
-    video-get-status
-    video-get-frame-count
-    video-get-pts
-    video-get-event
-    video-command
-    video-try-command
-    video-get-size
-    video-set-display-format
-    video-stillpicture
-    video-fast-forward
-    video-slowmotion
-    video-get-capabilities
-    video-clear-buffer
-    video-set-streamtype
-    video-set-format
diff --git a/Documentation/media/uapi/dvb/video_types.rst b/Documentation/media/uapi/dvb/video_types.rst
deleted file mode 100644
index 2697400ccf62..000000000000
--- a/Documentation/media/uapi/dvb/video_types.rst
+++ /dev/null
@@ -1,255 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _video_types:
-
-****************
-Video Data Types
-****************
-
-
-.. _video-format-t:
-
-video_format_t
-==============
-
-The ``video_format_t`` data type defined by
-
-
-.. code-block:: c
-
-    typedef enum {
-	VIDEO_FORMAT_4_3,     /* Select 4:3 format */
-	VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
-	VIDEO_FORMAT_221_1    /* 2.21:1 */
-    } video_format_t;
-
-is used in the VIDEO_SET_FORMAT function (??) to tell the driver which
-aspect ratio the output hardware (e.g. TV) has. It is also used in the
-data structures video_status (??) returned by VIDEO_GET_STATUS (??)
-and video_event (??) returned by VIDEO_GET_EVENT (??) which report
-about the display format of the current video stream.
-
-
-.. _video-displayformat-t:
-
-video_displayformat_t
-=====================
-
-In case the display format of the video stream and of the display
-hardware differ the application has to specify how to handle the
-cropping of the picture. This can be done using the
-VIDEO_SET_DISPLAY_FORMAT call (??) which accepts
-
-
-.. code-block:: c
-
-    typedef enum {
-	VIDEO_PAN_SCAN,       /* use pan and scan format */
-	VIDEO_LETTER_BOX,     /* use letterbox format */
-	VIDEO_CENTER_CUT_OUT  /* use center cut out format */
-    } video_displayformat_t;
-
-as argument.
-
-
-.. _video-stream-source-t:
-
-video_stream_source_t
-=====================
-
-The video stream source is set through the VIDEO_SELECT_SOURCE call
-and can take the following values, depending on whether we are replaying
-from an internal (demuxer) or external (user write) source.
-
-
-.. code-block:: c
-
-    typedef enum {
-	VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
-	VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
-		       comes from the user through the write
-		       system call */
-    } video_stream_source_t;
-
-VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the
-frontend or the DVR device) as the source of the video stream. If
-VIDEO_SOURCE_MEMORY is selected the stream comes from the application
-through the **write()** system call.
-
-
-.. _video-play-state-t:
-
-video_play_state_t
-==================
-
-The following values can be returned by the VIDEO_GET_STATUS call
-representing the state of video playback.
-
-
-.. code-block:: c
-
-    typedef enum {
-	VIDEO_STOPPED, /* Video is stopped */
-	VIDEO_PLAYING, /* Video is currently playing */
-	VIDEO_FREEZED  /* Video is freezed */
-    } video_play_state_t;
-
-
-.. c:type:: video_command
-
-struct video_command
-====================
-
-The structure must be zeroed before use by the application This ensures
-it can be extended safely in the future.
-
-
-.. code-block:: c
-
-    struct video_command {
-	__u32 cmd;
-	__u32 flags;
-	union {
-	    struct {
-		__u64 pts;
-	    } stop;
-
-	    struct {
-		/* 0 or 1000 specifies normal speed,
-		   1 specifies forward single stepping,
-		   -1 specifies backward single stepping,
-		   >>1: playback at speed/1000 of the normal speed,
-		   <-1: reverse playback at (-speed/1000) of the normal speed. */
-		__s32 speed;
-		__u32 format;
-	    } play;
-
-	    struct {
-		__u32 data[16];
-	    } raw;
-	};
-    };
-
-
-.. _video-size-t:
-
-video_size_t
-============
-
-
-.. code-block:: c
-
-    typedef struct {
-	int w;
-	int h;
-	video_format_t aspect_ratio;
-    } video_size_t;
-
-
-.. c:type:: video_event
-
-struct video_event
-==================
-
-The following is the structure of a video event as it is returned by the
-VIDEO_GET_EVENT call.
-
-
-.. code-block:: c
-
-    struct video_event {
-	__s32 type;
-    #define VIDEO_EVENT_SIZE_CHANGED    1
-    #define VIDEO_EVENT_FRAME_RATE_CHANGED  2
-    #define VIDEO_EVENT_DECODER_STOPPED     3
-    #define VIDEO_EVENT_VSYNC       4
-	long timestamp;
-	union {
-	    video_size_t size;
-	    unsigned int frame_rate;    /* in frames per 1000sec */
-	    unsigned char vsync_field;  /* unknown/odd/even/progressive */
-	} u;
-    };
-
-
-.. c:type:: video_status
-
-struct video_status
-===================
-
-The VIDEO_GET_STATUS call returns the following structure informing
-about various states of the playback operation.
-
-
-.. code-block:: c
-
-    struct video_status {
-	int                   video_blank;   /* blank video on freeze? */
-	video_play_state_t    play_state;    /* current state of playback */
-	video_stream_source_t stream_source; /* current source (demux/memory) */
-	video_format_t        video_format;  /* current aspect ratio of stream */
-	video_displayformat_t display_format;/* selected cropping mode */
-    };
-
-If video_blank is set video will be blanked out if the channel is
-changed or if playback is stopped. Otherwise, the last picture will be
-displayed. play_state indicates if the video is currently frozen,
-stopped, or being played back. The stream_source corresponds to the
-selected source for the video stream. It can come either from the
-demultiplexer or from memory. The video_format indicates the aspect
-ratio (one of 4:3 or 16:9) of the currently played video stream.
-Finally, display_format corresponds to the selected cropping mode in
-case the source video format is not the same as the format of the output
-device.
-
-
-.. c:type:: video_still_picture
-
-struct video_still_picture
-==========================
-
-An I-frame displayed via the VIDEO_STILLPICTURE call is passed on
-within the following structure.
-
-
-.. code-block:: c
-
-    /* pointer to and size of a single iframe in memory */
-    struct video_still_picture {
-	char *iFrame;        /* pointer to a single iframe in memory */
-	int32_t size;
-    };
-
-
-.. _video_caps:
-
-video capabilities
-==================
-
-A call to VIDEO_GET_CAPABILITIES returns an unsigned integer with the
-following bits set according to the hardwares capabilities.
-
-
-.. code-block:: c
-
-     /* bit definitions for capabilities: */
-     /* can the hardware decode MPEG1 and/or MPEG2? */
-     #define VIDEO_CAP_MPEG1   1
-     #define VIDEO_CAP_MPEG2   2
-     /* can you send a system and/or program stream to video device?
-	(you still have to open the video and the audio device but only
-	 send the stream to the video device) */
-     #define VIDEO_CAP_SYS     4
-     #define VIDEO_CAP_PROG    8
-     /* can the driver also handle SPU, NAVI and CSS encoded data?
-	(CSS API is not present yet) */
-     #define VIDEO_CAP_SPU    16
-     #define VIDEO_CAP_NAVI   32
-     #define VIDEO_CAP_CSS    64
diff --git a/Documentation/media/uapi/fdl-appendix.rst b/Documentation/media/uapi/fdl-appendix.rst
deleted file mode 100644
index 9316b8617502..000000000000
--- a/Documentation/media/uapi/fdl-appendix.rst
+++ /dev/null
@@ -1,478 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _fdl:
-
-******************************
-GNU Free Documentation License
-******************************
-
-
-.. _fdl-preamble:
-
-0. PREAMBLE
-===========
-
-The purpose of this License is to make a manual, textbook, or other
-written document “free” in the sense of freedom: to assure everyone the
-effective freedom to copy and redistribute it, with or without modifying
-it, either commercially or noncommercially. Secondarily, this License
-preserves for the author and publisher a way to get credit for their
-work, while not being considered responsible for modifications made by
-others.
-
-This License is a kind of “copyleft”, which means that derivative works
-of the document must themselves be free in the same sense. It
-complements the GNU General Public License, which is a copyleft license
-designed for free software.
-
-We have designed this License in order to use it for manuals for free
-software, because free software needs free documentation: a free program
-should come with manuals providing the same freedoms that the software
-does. But this License is not limited to software manuals; it can be
-used for any textual work, regardless of subject matter or whether it is
-published as a printed book. We recommend this License principally for
-works whose purpose is instruction or reference.
-
-
-.. _fdl-section1:
-
-1. APPLICABILITY AND DEFINITIONS
-================================
-
-
-.. _fdl-document:
-
-This License applies to any manual or other work that contains a notice
-placed by the copyright holder saying it can be distributed under the
-terms of this License. The “Document”, below, refers to any such manual
-or work. Any member of the public is a licensee, and is addressed as
-“you”.
-
-
-.. _fdl-modified:
-
-A “Modified Version” of the Document means any work containing the
-Document or a portion of it, either copied verbatim, or with
-modifications and/or translated into another language.
-
-
-.. _fdl-secondary:
-
-A “Secondary Section” is a named appendix or a front-matter section of
-the :ref:`Document <fdl-document>` that deals exclusively with the
-relationship of the publishers or authors of the Document to the
-Document's overall subject (or to related matters) and contains nothing
-that could fall directly within that overall subject. (For example, if
-the Document is in part a textbook of mathematics, a Secondary Section
-may not explain any mathematics.) The relationship could be a matter of
-historical connection with the subject or with related matters, or of
-legal, commercial, philosophical, ethical or political position
-regarding them.
-
-
-.. _fdl-invariant:
-
-The “Invariant Sections” are certain
-:ref:`Secondary Sections <fdl-secondary>` whose titles are designated,
-as being those of Invariant Sections, in the notice that says that the
-:ref:`Document <fdl-document>` is released under this License.
-
-
-.. _fdl-cover-texts:
-
-The “Cover Texts” are certain short passages of text that are listed, as
-Front-Cover Texts or Back-Cover Texts, in the notice that says that the
-:ref:`Document <fdl-document>` is released under this License.
-
-
-.. _fdl-transparent:
-
-A “Transparent” copy of the :ref:`Document <fdl-document>` means a
-machine-readable copy, represented in a format whose specification is
-available to the general public, whose contents can be viewed and edited
-directly and straightforwardly with generic text editors or (for images
-composed of pixels) generic paint programs or (for drawings) some widely
-available drawing editor, and that is suitable for input to text
-formatters or for automatic translation to a variety of formats suitable
-for input to text formatters. A copy made in an otherwise Transparent
-file format whose markup has been designed to thwart or discourage
-subsequent modification by readers is not Transparent. A copy that is
-not “Transparent” is called “Opaque”.
-
-Examples of suitable formats for Transparent copies include plain ASCII
-without markup, Texinfo input format, LaTeX input format, SGML or XML
-using a publicly available DTD, and standard-conforming simple HTML
-designed for human modification. Opaque formats include PostScript, PDF,
-proprietary formats that can be read and edited only by proprietary word
-processors, SGML or XML for which the DTD and/or processing tools are
-not generally available, and the machine-generated HTML produced by some
-word processors for output purposes only.
-
-
-.. _fdl-title-page:
-
-The “Title Page” means, for a printed book, the title page itself, plus
-such following pages as are needed to hold, legibly, the material this
-License requires to appear in the title page. For works in formats which
-do not have any title page as such, “Title Page” means the text near the
-most prominent appearance of the work's title, preceding the beginning
-of the body of the text.
-
-
-.. _fdl-section2:
-
-2. VERBATIM COPYING
-===================
-
-You may copy and distribute the :ref:`Document <fdl-document>` in any
-medium, either commercially or noncommercially, provided that this
-License, the copyright notices, and the license notice saying this
-License applies to the Document are reproduced in all copies, and that
-you add no other conditions whatsoever to those of this License. You may
-not use technical measures to obstruct or control the reading or further
-copying of the copies you make or distribute. However, you may accept
-compensation in exchange for copies. If you distribute a large enough
-number of copies you must also follow the conditions in
-:ref:`section 3 <fdl-section3>`.
-
-You may also lend copies, under the same conditions stated above, and
-you may publicly display copies.
-
-
-.. _fdl-section3:
-
-3. COPYING IN QUANTITY
-======================
-
-If you publish printed copies of the :ref:`Document <fdl-document>`
-numbering more than 100, and the Document's license notice requires
-:ref:`Cover Texts <fdl-cover-texts>`, you must enclose the copies in
-covers that carry, clearly and legibly, all these Cover Texts:
-Front-Cover Texts on the front cover, and Back-Cover Texts on the back
-cover. Both covers must also clearly and legibly identify you as the
-publisher of these copies. The front cover must present the full title
-with all words of the title equally prominent and visible. You may add
-other material on the covers in addition. Copying with changes limited
-to the covers, as long as they preserve the title of the
-:ref:`Document <fdl-document>` and satisfy these conditions, can be
-treated as verbatim copying in other respects.
-
-If the required texts for either cover are too voluminous to fit
-legibly, you should put the first ones listed (as many as fit
-reasonably) on the actual cover, and continue the rest onto adjacent
-pages.
-
-If you publish or distribute :ref:`Opaque <fdl-transparent>` copies of
-the :ref:`Document <fdl-document>` numbering more than 100, you must
-either include a machine-readable :ref:`Transparent <fdl-transparent>`
-copy along with each Opaque copy, or state in or with each Opaque copy a
-publicly-accessible computer-network location containing a complete
-Transparent copy of the Document, free of added material, which the
-general network-using public has access to download anonymously at no
-charge using public-standard network protocols. If you use the latter
-option, you must take reasonably prudent steps, when you begin
-distribution of Opaque copies in quantity, to ensure that this
-Transparent copy will remain thus accessible at the stated location
-until at least one year after the last time you distribute an Opaque
-copy (directly or through your agents or retailers) of that edition to
-the public.
-
-It is requested, but not required, that you contact the authors of the
-:ref:`Document <fdl-document>` well before redistributing any large
-number of copies, to give them a chance to provide you with an updated
-version of the Document.
-
-
-.. _fdl-section4:
-
-4. MODIFICATIONS
-================
-
-You may copy and distribute a :ref:`Modified Version <fdl-modified>`
-of the :ref:`Document <fdl-document>` under the conditions of sections
-:ref:`2 <fdl-section2>` and :ref:`3 <fdl-section3>` above, provided
-that you release the Modified Version under precisely this License, with
-the Modified Version filling the role of the Document, thus licensing
-distribution and modification of the Modified Version to whoever
-possesses a copy of it. In addition, you must do these things in the
-Modified Version:
-
--  **A.**
-   Use in the :ref:`Title Page <fdl-title-page>` (and on the covers,
-   if any) a title distinct from that of the
-   :ref:`Document <fdl-document>`, and from those of previous versions
-   (which should, if there were any, be listed in the History section of
-   the Document). You may use the same title as a previous version if
-   the original publisher of that version gives permission.
-
--  **B.**
-   List on the :ref:`Title Page <fdl-title-page>`, as authors, one or
-   more persons or entities responsible for authorship of the
-   modifications in the :ref:`Modified Version <fdl-modified>`,
-   together with at least five of the principal authors of the
-   :ref:`Document <fdl-document>` (all of its principal authors, if it
-   has less than five).
-
--  **C.**
-   State on the :ref:`Title Page <fdl-title-page>` the name of the
-   publisher of the :ref:`Modified Version <fdl-modified>`, as the
-   publisher.
-
--  **D.**
-   Preserve all the copyright notices of the
-   :ref:`Document <fdl-document>`.
-
--  **E.**
-   Add an appropriate copyright notice for your modifications adjacent
-   to the other copyright notices.
-
--  **F.**
-   Include, immediately after the copyright notices, a license notice
-   giving the public permission to use the
-   :ref:`Modified Version <fdl-modified>` under the terms of this
-   License, in the form shown in the Addendum below.
-
--  **G.**
-   Preserve in that license notice the full lists of
-   :ref:`Invariant Sections <fdl-invariant>` and required
-   :ref:`Cover Texts <fdl-cover-texts>` given in the
-   :ref:`Document's <fdl-document>` license notice.
-
--  **H.**
-   Include an unaltered copy of this License.
-
--  **I.**
-   Preserve the section entitled “History”, and its title, and add to it
-   an item stating at least the title, year, new authors, and publisher
-   of the :ref:`Modified Version <fdl-modified>` as given on the
-   :ref:`Title Page <fdl-title-page>`. If there is no section entitled
-   “History” in the :ref:`Document <fdl-document>`, create one stating
-   the title, year, authors, and publisher of the Document as given on
-   its Title Page, then add an item describing the Modified Version as
-   stated in the previous sentence.
-
--  **J.**
-   Preserve the network location, if any, given in the
-   :ref:`Document <fdl-document>` for public access to a
-   :ref:`Transparent <fdl-transparent>` copy of the Document, and
-   likewise the network locations given in the Document for previous
-   versions it was based on. These may be placed in the “History”
-   section. You may omit a network location for a work that was
-   published at least four years before the Document itself, or if the
-   original publisher of the version it refers to gives permission.
-
--  **K.**
-   In any section entitled “Acknowledgements” or “Dedications”, preserve
-   the section's title, and preserve in the section all the substance
-   and tone of each of the contributor acknowledgements and/or
-   dedications given therein.
-
--  **L.**
-   Preserve all the :ref:`Invariant Sections <fdl-invariant>` of the
-   :ref:`Document <fdl-document>`, unaltered in their text and in
-   their titles. Section numbers or the equivalent are not considered
-   part of the section titles.
-
--  **M.**
-   Delete any section entitled “Endorsements”. Such a section may not be
-   included in the :ref:`Modified Version <fdl-modified>`.
-
--  **N.**
-   Do not retitle any existing section as “Endorsements” or to conflict
-   in title with any :ref:`Invariant Section <fdl-invariant>`.
-
-If the :ref:`Modified Version <fdl-modified>` includes new
-front-matter sections or appendices that qualify as
-:ref:`Secondary Sections <fdl-secondary>` and contain no material
-copied from the Document, you may at your option designate some or all
-of these sections as invariant. To do this, add their titles to the list
-of :ref:`Invariant Sections <fdl-invariant>` in the Modified Version's
-license notice. These titles must be distinct from any other section
-titles.
-
-You may add a section entitled “Endorsements”, provided it contains
-nothing but endorsements of your
-:ref:`Modified Version <fdl-modified>` by various parties--for
-example, statements of peer review or that the text has been approved by
-an organization as the authoritative definition of a standard.
-
-You may add a passage of up to five words as a
-:ref:`Front-Cover Text <fdl-cover-texts>`, and a passage of up to 25
-words as a :ref:`Back-Cover Text <fdl-cover-texts>`, to the end of the
-list of :ref:`Cover Texts <fdl-cover-texts>` in the
-:ref:`Modified Version <fdl-modified>`. Only one passage of
-Front-Cover Text and one of Back-Cover Text may be added by (or through
-arrangements made by) any one entity. If the
-:ref:`Document <fdl-document>` already includes a cover text for the
-same cover, previously added by you or by arrangement made by the same
-entity you are acting on behalf of, you may not add another; but you may
-replace the old one, on explicit permission from the previous publisher
-that added the old one.
-
-The author(s) and publisher(s) of the :ref:`Document <fdl-document>`
-do not by this License give permission to use their names for publicity
-for or to assert or imply endorsement of any
-:ref:`Modified Version <fdl-modified>`.
-
-
-.. _fdl-section5:
-
-5. COMBINING DOCUMENTS
-======================
-
-You may combine the :ref:`Document <fdl-document>` with other
-documents released under this License, under the terms defined in
-:ref:`section 4 <fdl-section4>` above for modified versions, provided
-that you include in the combination all of the
-:ref:`Invariant Sections <fdl-invariant>` of all of the original
-documents, unmodified, and list them all as Invariant Sections of your
-combined work in its license notice.
-
-The combined work need only contain one copy of this License, and
-multiple identical :ref:`Invariant Sections <fdl-invariant>` may be
-replaced with a single copy. If there are multiple Invariant Sections
-with the same name but different contents, make the title of each such
-section unique by adding at the end of it, in parentheses, the name of
-the original author or publisher of that section if known, or else a
-unique number. Make the same adjustment to the section titles in the
-list of Invariant Sections in the license notice of the combined work.
-
-In the combination, you must combine any sections entitled “History” in
-the various original documents, forming one section entitled “History”;
-likewise combine any sections entitled “Acknowledgements”, and any
-sections entitled “Dedications”. You must delete all sections entitled
-“Endorsements.”
-
-
-.. _fdl-section6:
-
-6. COLLECTIONS OF DOCUMENTS
-===========================
-
-You may make a collection consisting of the
-:ref:`Document <fdl-document>` and other documents released under this
-License, and replace the individual copies of this License in the
-various documents with a single copy that is included in the collection,
-provided that you follow the rules of this License for verbatim copying
-of each of the documents in all other respects.
-
-You may extract a single document from such a collection, and distribute
-it individually under this License, provided you insert a copy of this
-License into the extracted document, and follow this License in all
-other respects regarding verbatim copying of that document.
-
-
-.. _fdl-section7:
-
-7. AGGREGATION WITH INDEPENDENT WORKS
-=====================================
-
-A compilation of the :ref:`Document <fdl-document>` or its derivatives
-with other separate and independent documents or works, in or on a
-volume of a storage or distribution medium, does not as a whole count as
-a :ref:`Modified Version <fdl-modified>` of the Document, provided no
-compilation copyright is claimed for the compilation. Such a compilation
-is called an “aggregate”, and this License does not apply to the other
-self-contained works thus compiled with the Document , on account of
-their being thus compiled, if they are not themselves derivative works
-of the Document. If the :ref:`Cover Text <fdl-cover-texts>`
-requirement of :ref:`section 3 <fdl-section3>` is applicable to these
-copies of the Document, then if the Document is less than one quarter of
-the entire aggregate, the Document's Cover Texts may be placed on covers
-that surround only the Document within the aggregate. Otherwise they
-must appear on covers around the whole aggregate.
-
-
-.. _fdl-section8:
-
-8. TRANSLATION
-==============
-
-Translation is considered a kind of modification, so you may distribute
-translations of the :ref:`Document <fdl-document>` under the terms of
-:ref:`section 4 <fdl-section4>`. Replacing
-:ref:`Invariant Sections <fdl-invariant>` with translations requires
-special permission from their copyright holders, but you may include
-translations of some or all Invariant Sections in addition to the
-original versions of these Invariant Sections. You may include a
-translation of this License provided that you also include the original
-English version of this License. In case of a disagreement between the
-translation and the original English version of this License, the
-original English version will prevail.
-
-
-.. _fdl-section9:
-
-9. TERMINATION
-==============
-
-You may not copy, modify, sublicense, or distribute the
-:ref:`Document <fdl-document>` except as expressly provided for under
-this License. Any other attempt to copy, modify, sublicense or
-distribute the Document is void, and will automatically terminate your
-rights under this License. However, parties who have received copies, or
-rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-
-.. _fdl-section10:
-
-10. FUTURE REVISIONS OF THIS LICENSE
-====================================
-
-The `Free Software Foundation <http://www.gnu.org/fsf/fsf.html>`__
-may publish new, revised versions of the GNU Free Documentation License
-from time to time. Such new versions will be similar in spirit to the
-present version, but may differ in detail to address new problems or
-concerns. See
-`http://www.gnu.org/copyleft/ <http://www.gnu.org/copyleft>`__.
-
-Each version of the License is given a distinguishing version number. If
-the :ref:`Document <fdl-document>` specifies that a particular
-numbered version of this License “or any later version” applies to it,
-you have the option of following the terms and conditions either of that
-specified version or of any later version that has been published (not
-as a draft) by the Free Software Foundation. If the Document does not
-specify a version number of this License, you may choose any version
-ever published (not as a draft) by the Free Software Foundation.
-
-
-.. _fdl-using:
-
-Addendum
-========
-
-To use this License in a document you have written, include a copy of
-the License in the document and put the following copyright and license
-notices just after the title page:
-
-    Copyright © YEAR YOUR NAME.
-
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation; with the :ref:`Invariant Sections <fdl-invariant>`
-    being LIST THEIR TITLES, with the
-    :ref:`Front-Cover Texts <fdl-cover-texts>` being LIST, and with
-    the :ref:`Back-Cover Texts <fdl-cover-texts>` being LIST. A copy
-    of the license is included in the section entitled “GNU Free
-    Documentation License”.
-
-If you have no :ref:`Invariant Sections <fdl-invariant>`, write “with
-no Invariant Sections” instead of saying which ones are invariant. If
-you have no :ref:`Front-Cover Texts <fdl-cover-texts>`, write “no
-Front-Cover Texts” instead of “Front-Cover Texts being LIST”; likewise
-for :ref:`Back-Cover Texts <fdl-cover-texts>`.
-
-If your document contains nontrivial examples of program code, we
-recommend releasing these examples in parallel under your choice of free
-software license, such as the
-`GNU General Public License <http://www.gnu.org/copyleft/gpl.html>`__,
-to permit their use in free software.
diff --git a/Documentation/media/uapi/gen-errors.rst b/Documentation/media/uapi/gen-errors.rst
deleted file mode 100644
index 043c312dc06d..000000000000
--- a/Documentation/media/uapi/gen-errors.rst
+++ /dev/null
@@ -1,103 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _gen_errors:
-
-*******************
-Generic Error Codes
-*******************
-
-
-.. _gen-errors:
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table:: Generic error codes
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 16
-
-
-    -  -  ``EAGAIN`` (aka ``EWOULDBLOCK``)
-
-       -  The ioctl can't be handled because the device is in state where it
-	  can't perform it. This could happen for example in case where
-	  device is sleeping and ioctl is performed to query statistics. It
-	  is also returned when the ioctl would need to wait for an event,
-	  but the device was opened in non-blocking mode.
-
-    -  -  ``EBADF``
-
-       -  The file descriptor is not a valid.
-
-    -  -  ``EBUSY``
-
-       -  The ioctl can't be handled because the device is busy. This is
-	  typically return while device is streaming, and an ioctl tried to
-	  change something that would affect the stream, or would require
-	  the usage of a hardware resource that was already allocated. The
-	  ioctl must not be retried without performing another action to fix
-	  the problem first (typically: stop the stream before retrying).
-
-    -  -  ``EFAULT``
-
-       -  There was a failure while copying data from/to userspace, probably
-	  caused by an invalid pointer reference.
-
-    -  -  ``EINVAL``
-
-       -  One or more of the ioctl parameters are invalid or out of the
-	  allowed range. This is a widely used error code. See the
-	  individual ioctl requests for specific causes.
-
-    -  -  ``ENODEV``
-
-       -  Device not found or was removed.
-
-    -  -  ``ENOMEM``
-
-       -  There's not enough memory to handle the desired operation.
-
-    -  -  ``ENOTTY``
-
-       -  The ioctl is not supported by the driver, actually meaning that
-	  the required functionality is not available, or the file
-	  descriptor is not for a media device.
-
-    -  -  ``ENOSPC``
-
-       -  On USB devices, the stream ioctl's can return this error, meaning
-	  that this request would overcommit the usb bandwidth reserved for
-	  periodic transfers (up to 80% of the USB bandwidth).
-
-    -  -  ``EPERM``
-
-       -  Permission denied. Can be returned if the device needs write
-	  permission, or some special capabilities is needed (e. g. root)
-
-    -  -  ``EIO``
-
-       -  I/O error. Typically used when there are problems communicating with
-          a hardware device. This could indicate broken or flaky hardware.
-	  It's a 'Something is wrong, I give up!' type of error.
-
-    -  - ``ENXIO``
-
-       -  No device corresponding to this device special file exists.
-
-
-.. note::
-
-  #. This list is not exhaustive; ioctls may return other error codes.
-     Since errors may have side effects such as a driver reset,
-     applications should abort on unexpected errors, or otherwise
-     assume that the device is in a bad state.
-
-  #. Request-specific error codes are listed in the individual
-     requests descriptions.
diff --git a/Documentation/media/uapi/mediactl/media-controller-intro.rst b/Documentation/media/uapi/mediactl/media-controller-intro.rst
deleted file mode 100644
index 281c559c2f3c..000000000000
--- a/Documentation/media/uapi/mediactl/media-controller-intro.rst
+++ /dev/null
@@ -1,40 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media-controller-intro:
-
-Introduction
-============
-
-Media devices increasingly handle multiple related functions. Many USB
-cameras include microphones, video capture hardware can also output
-video, or SoC camera interfaces also perform memory-to-memory operations
-similar to video codecs.
-
-Independent functions, even when implemented in the same hardware, can
-be modelled as separate devices. A USB camera with a microphone will be
-presented to userspace applications as V4L2 and ALSA capture devices.
-The devices' relationships (when using a webcam, end-users shouldn't
-have to manually select the associated USB microphone), while not made
-available directly to applications by the drivers, can usually be
-retrieved from sysfs.
-
-With more and more advanced SoC devices being introduced, the current
-approach will not scale. Device topologies are getting increasingly
-complex and can't always be represented by a tree structure. Hardware
-blocks are shared between different functions, creating dependencies
-between seemingly unrelated devices.
-
-Kernel abstraction APIs such as V4L2 and ALSA provide means for
-applications to access hardware parameters. As newer hardware expose an
-increasingly high number of those parameters, drivers need to guess what
-applications really require based on limited information, thereby
-implementing policies that belong to userspace.
-
-The media controller API aims at solving those problems.
diff --git a/Documentation/media/uapi/mediactl/media-controller-model.rst b/Documentation/media/uapi/mediactl/media-controller-model.rst
deleted file mode 100644
index b6d5902b556d..000000000000
--- a/Documentation/media/uapi/mediactl/media-controller-model.rst
+++ /dev/null
@@ -1,42 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media-controller-model:
-
-Media device model
-==================
-
-Discovering a device internal topology, and configuring it at runtime,
-is one of the goals of the media controller API. To achieve this,
-hardware devices and Linux Kernel interfaces are modelled as graph
-objects on an oriented graph. The object types that constitute the graph
-are:
-
--  An **entity** is a basic media hardware or software building block.
-   It can correspond to a large variety of logical blocks such as
-   physical hardware devices (CMOS sensor for instance), logical
-   hardware devices (a building block in a System-on-Chip image
-   processing pipeline), DMA channels or physical connectors.
-
--  An **interface** is a graph representation of a Linux Kernel
-   userspace API interface, like a device node or a sysfs file that
-   controls one or more entities in the graph.
-
--  A **pad** is a data connection endpoint through which an entity can
-   interact with other entities. Data (not restricted to video) produced
-   by an entity flows from the entity's output to one or more entity
-   inputs. Pads should not be confused with physical pins at chip
-   boundaries.
-
--  A **data link** is a point-to-point oriented connection between two
-   pads, either on the same entity or on different entities. Data flows
-   from a source pad to a sink pad.
-
--  An **interface link** is a point-to-point bidirectional control
-   connection between a Linux Kernel interface and an entity.
diff --git a/Documentation/media/uapi/mediactl/media-controller.rst b/Documentation/media/uapi/mediactl/media-controller.rst
deleted file mode 100644
index 6e624f690331..000000000000
--- a/Documentation/media/uapi/mediactl/media-controller.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. include:: <isonum.txt>
-
-.. _media_controller:
-
-##############################
-Part IV - Media Controller API
-##############################
-
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-    :maxdepth: 5
-    :numbered:
-
-    media-controller-intro
-    media-controller-model
-    media-types
-    request-api
-    media-funcs
-    media-header
-
-
-**********************
-Revision and Copyright
-**********************
-
-Authors:
-
-- Pinchart, Laurent <laurent.pinchart@ideasonboard.com>
-
- - Initial version.
-
-- Carvalho Chehab, Mauro <mchehab@kernel.org>
-
- - MEDIA_IOC_G_TOPOLOGY documentation and documentation improvements.
-
-**Copyright** |copy| 2010 : Laurent Pinchart
-
-**Copyright** |copy| 2015-2016 : Mauro Carvalho Chehab
-
-****************
-Revision History
-****************
-
-:revision: 1.1.0 / 2015-12-12 (*mcc*)
-
-:revision: 1.0.0 / 2010-11-10 (*lp*)
-
-Initial revision
diff --git a/Documentation/media/uapi/mediactl/media-func-close.rst b/Documentation/media/uapi/mediactl/media-func-close.rst
deleted file mode 100644
index 369ccd4dee56..000000000000
--- a/Documentation/media/uapi/mediactl/media-func-close.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media-func-close:
-
-*************
-media close()
-*************
-
-Name
-====
-
-media-close - Close a media device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-
-
-.. c:function:: int close( int fd )
-    :name: mc-close
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <mc-open>`.
-
-
-Description
-===========
-
-Closes the media device. Resources associated with the file descriptor
-are freed. The device configuration remain unchanged.
-
-
-Return Value
-============
-
-:ref:`close() <media-func-close>` returns 0 on success. On error, -1 is returned, and
-``errno`` is set appropriately. Possible error codes are:
-
-EBADF
-    ``fd`` is not a valid open file descriptor.
diff --git a/Documentation/media/uapi/mediactl/media-func-ioctl.rst b/Documentation/media/uapi/mediactl/media-func-ioctl.rst
deleted file mode 100644
index 9a990d6480f5..000000000000
--- a/Documentation/media/uapi/mediactl/media-func-ioctl.rst
+++ /dev/null
@@ -1,74 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media-func-ioctl:
-
-*************
-media ioctl()
-*************
-
-Name
-====
-
-media-ioctl - Control a media device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <sys/ioctl.h>
-
-
-.. c:function:: int ioctl( int fd, int request, void *argp )
-    :name: mc-ioctl
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :c:func:`open() <mc-open>`.
-
-``request``
-    Media ioctl request code as defined in the media.h header file, for
-    example MEDIA_IOC_SETUP_LINK.
-
-``argp``
-    Pointer to a request-specific structure.
-
-
-Description
-===========
-
-The :ref:`ioctl() <media-func-ioctl>` function manipulates media device
-parameters. The argument ``fd`` must be an open file descriptor.
-
-The ioctl ``request`` code specifies the media function to be called. It
-has encoded in it whether the argument is an input, output or read/write
-parameter, and the size of the argument ``argp`` in bytes.
-
-Macros and structures definitions specifying media ioctl requests and
-their parameters are located in the media.h header file. All media ioctl
-requests, their respective function and parameters are specified in
-:ref:`media-user-func`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-Request-specific error codes are listed in the individual requests
-descriptions.
-
-When an ioctl that takes an output or read/write parameter fails, the
-parameter remains unmodified.
diff --git a/Documentation/media/uapi/mediactl/media-func-open.rst b/Documentation/media/uapi/mediactl/media-func-open.rst
deleted file mode 100644
index cd2f840ddf73..000000000000
--- a/Documentation/media/uapi/mediactl/media-func-open.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media-func-open:
-
-************
-media open()
-************
-
-Name
-====
-
-media-open - Open a media device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <fcntl.h>
-
-
-.. c:function:: int open( const char *device_name, int flags )
-    :name: mc-open
-
-Arguments
-=========
-
-``device_name``
-    Device to be opened.
-
-``flags``
-    Open flags. Access mode must be either ``O_RDONLY`` or ``O_RDWR``.
-    Other flags have no effect.
-
-
-Description
-===========
-
-To open a media device applications call :ref:`open() <media-func-open>` with the
-desired device name. The function has no side effects; the device
-configuration remain unchanged.
-
-When the device is opened in read-only mode, attempts to modify its
-configuration will result in an error, and ``errno`` will be set to
-EBADF.
-
-
-Return Value
-============
-
-:ref:`open() <func-open>` returns the new file descriptor on success. On error,
--1 is returned, and ``errno`` is set appropriately. Possible error codes
-are:
-
-EACCES
-    The requested access to the file is not allowed.
-
-EMFILE
-    The process already has the maximum number of files open.
-
-ENFILE
-    The system limit on the total number of open files has been reached.
-
-ENOMEM
-    Insufficient kernel memory was available.
-
-ENXIO
-    No device corresponding to this device special file exists.
diff --git a/Documentation/media/uapi/mediactl/media-funcs.rst b/Documentation/media/uapi/mediactl/media-funcs.rst
deleted file mode 100644
index 87b65df8252a..000000000000
--- a/Documentation/media/uapi/mediactl/media-funcs.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media-user-func:
-
-******************
-Function Reference
-******************
-
-
-.. toctree::
-    :maxdepth: 1
-
-    media-func-open
-    media-func-close
-    media-func-ioctl
-    media-ioc-device-info
-    media-ioc-g-topology
-    media-ioc-enum-entities
-    media-ioc-enum-links
-    media-ioc-setup-link
-    media-ioc-request-alloc
-    request-func-close
-    request-func-ioctl
-    request-func-poll
-    media-request-ioc-queue
-    media-request-ioc-reinit
diff --git a/Documentation/media/uapi/mediactl/media-header.rst b/Documentation/media/uapi/mediactl/media-header.rst
deleted file mode 100644
index 1cb7c88aeff0..000000000000
--- a/Documentation/media/uapi/mediactl/media-header.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media_header:
-
-****************************
-Media Controller Header File
-****************************
-
-.. kernel-include:: $BUILDDIR/media.h.rst
-
diff --git a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst
deleted file mode 100644
index f8038cfb708c..000000000000
--- a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst
+++ /dev/null
@@ -1,118 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media_ioc_device_info:
-
-***************************
-ioctl MEDIA_IOC_DEVICE_INFO
-***************************
-
-Name
-====
-
-MEDIA_IOC_DEVICE_INFO - Query device information
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, MEDIA_IOC_DEVICE_INFO, struct media_device_info *argp )
-    :name: MEDIA_IOC_DEVICE_INFO
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <media-func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`media_device_info`.
-
-
-Description
-===========
-
-All media devices must support the ``MEDIA_IOC_DEVICE_INFO`` ioctl. To
-query device information, applications call the ioctl with a pointer to
-a struct :c:type:`media_device_info`. The driver
-fills the structure and returns the information to the application. The
-ioctl never fails.
-
-
-.. c:type:: media_device_info
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct media_device_info
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-
-    *  -  char
-       -  ``driver``\ [16]
-       -  Name of the driver implementing the media API as a NUL-terminated
-	  ASCII string. The driver version is stored in the
-	  ``driver_version`` field.
-
-	  Driver specific applications can use this information to verify
-	  the driver identity. It is also useful to work around known bugs,
-	  or to identify drivers in error reports.
-
-    *  -  char
-       -  ``model``\ [32]
-       -  Device model name as a NUL-terminated UTF-8 string. The device
-	  version is stored in the ``device_version`` field and is not be
-	  appended to the model name.
-
-    *  -  char
-       -  ``serial``\ [40]
-       -  Serial number as a NUL-terminated ASCII string.
-
-    *  -  char
-       -  ``bus_info``\ [32]
-       -  Location of the device in the system as a NUL-terminated ASCII
-	  string. This includes the bus type name (PCI, USB, ...) and a
-	  bus-specific identifier.
-
-    *  -  __u32
-       -  ``media_version``
-       -  Media API version, formatted with the ``KERNEL_VERSION()`` macro.
-
-    *  -  __u32
-       -  ``hw_revision``
-       -  Hardware device revision in a driver-specific format.
-
-    *  -  __u32
-       -  ``driver_version``
-       -  Media device driver version, formatted with the
-	  ``KERNEL_VERSION()`` macro. Together with the ``driver`` field
-	  this identifies a particular driver.
-
-    *  -  __u32
-       -  ``reserved``\ [31]
-       -  Reserved for future extensions. Drivers and applications must set
-	  this array to zero.
-
-
-The ``serial`` and ``bus_info`` fields can be used to distinguish
-between multiple instances of otherwise identical hardware. The serial
-number takes precedence when provided and can be assumed to be unique.
-If the serial number is an empty string, the ``bus_info`` field can be
-used instead. The ``bus_info`` field is guaranteed to be unique, but can
-vary across reboots or device unplug/replug.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst
deleted file mode 100644
index 33e2b110145c..000000000000
--- a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst
+++ /dev/null
@@ -1,156 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media_ioc_enum_entities:
-
-*****************************
-ioctl MEDIA_IOC_ENUM_ENTITIES
-*****************************
-
-Name
-====
-
-MEDIA_IOC_ENUM_ENTITIES - Enumerate entities and their properties
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, MEDIA_IOC_ENUM_ENTITIES, struct media_entity_desc *argp )
-    :name: MEDIA_IOC_ENUM_ENTITIES
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <media-func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`media_entity_desc`.
-
-
-Description
-===========
-
-To query the attributes of an entity, applications set the id field of a
-struct :c:type:`media_entity_desc` structure and
-call the MEDIA_IOC_ENUM_ENTITIES ioctl with a pointer to this
-structure. The driver fills the rest of the structure or returns an
-EINVAL error code when the id is invalid.
-
-.. _media-ent-id-flag-next:
-
-Entities can be enumerated by or'ing the id with the
-``MEDIA_ENT_ID_FLAG_NEXT`` flag. The driver will return information
-about the entity with the smallest id strictly larger than the requested
-one ('next entity'), or the ``EINVAL`` error code if there is none.
-
-Entity IDs can be non-contiguous. Applications must *not* try to
-enumerate entities by calling MEDIA_IOC_ENUM_ENTITIES with increasing
-id's until they get an error.
-
-
-.. c:type:: media_entity_desc
-
-.. tabularcolumns:: |p{1.5cm}|p{1.7cm}|p{1.6cm}|p{1.5cm}|p{11.2cm}|
-
-.. flat-table:: struct media_entity_desc
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 2 2 1 8
-
-    *  -  __u32
-       -  ``id``
-       -
-       -  Entity ID, set by the application. When the ID is or'ed with
-	  ``MEDIA_ENT_ID_FLAG_NEXT``, the driver clears the flag and returns
-	  the first entity with a larger ID. Do not expect that the ID will
-	  always be the same for each instance of the device. In other words,
-	  do not hardcode entity IDs in an application.
-
-    *  -  char
-       -  ``name``\ [32]
-       -
-       -  Entity name as an UTF-8 NULL-terminated string. This name must be unique
-          within the media topology.
-
-    *  -  __u32
-       -  ``type``
-       -
-       -  Entity type, see :ref:`media-entity-functions` for details.
-
-    *  -  __u32
-       -  ``revision``
-       -
-       -  Entity revision. Always zero (obsolete)
-
-    *  -  __u32
-       -  ``flags``
-       -
-       -  Entity flags, see :ref:`media-entity-flag` for details.
-
-    *  -  __u32
-       -  ``group_id``
-       -
-       -  Entity group ID. Always zero (obsolete)
-
-    *  -  __u16
-       -  ``pads``
-       -
-       -  Number of pads
-
-    *  -  __u16
-       -  ``links``
-       -
-       -  Total number of outbound links. Inbound links are not counted in
-	  this field.
-
-    *  -  __u32
-       -  ``reserved[4]``
-       -
-       -  Reserved for future extensions. Drivers and applications must set
-          the array to zero.
-
-    *  -  union {
-       -  (anonymous)
-
-    *  -  struct
-       -  ``dev``
-       -
-       -  Valid for (sub-)devices that create a single device node.
-
-    *  -
-       -  __u32
-       -  ``major``
-       -  Device node major number.
-
-    *  -
-       -  __u32
-       -  ``minor``
-       -  Device node minor number.
-
-    *  -  __u8
-       -  ``raw``\ [184]
-       -
-       -
-    *  - }
-       -
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`media_entity_desc` ``id``
-    references a non-existing entity.
diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
deleted file mode 100644
index b827ebc398f8..000000000000
--- a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
+++ /dev/null
@@ -1,157 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media_ioc_enum_links:
-
-**************************
-ioctl MEDIA_IOC_ENUM_LINKS
-**************************
-
-Name
-====
-
-MEDIA_IOC_ENUM_LINKS - Enumerate all pads and links for a given entity
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, MEDIA_IOC_ENUM_LINKS, struct media_links_enum *argp )
-    :name: MEDIA_IOC_ENUM_LINKS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <media-func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`media_links_enum`.
-
-
-Description
-===========
-
-To enumerate pads and/or links for a given entity, applications set the
-entity field of a struct :c:type:`media_links_enum`
-structure and initialize the struct
-:c:type:`media_pad_desc` and struct
-:c:type:`media_link_desc` structure arrays pointed by
-the ``pads`` and ``links`` fields. They then call the
-MEDIA_IOC_ENUM_LINKS ioctl with a pointer to this structure.
-
-If the ``pads`` field is not NULL, the driver fills the ``pads`` array
-with information about the entity's pads. The array must have enough
-room to store all the entity's pads. The number of pads can be retrieved
-with :ref:`MEDIA_IOC_ENUM_ENTITIES`.
-
-If the ``links`` field is not NULL, the driver fills the ``links`` array
-with information about the entity's outbound links. The array must have
-enough room to store all the entity's outbound links. The number of
-outbound links can be retrieved with :ref:`MEDIA_IOC_ENUM_ENTITIES`.
-
-Only forward links that originate at one of the entity's source pads are
-returned during the enumeration process.
-
-
-.. c:type:: media_links_enum
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct media_links_enum
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    *  -  __u32
-       -  ``entity``
-       -  Entity id, set by the application.
-
-    *  -  struct :c:type:`media_pad_desc`
-       -  \*\ ``pads``
-       -  Pointer to a pads array allocated by the application. Ignored if
-	  NULL.
-
-    *  -  struct :c:type:`media_link_desc`
-       -  \*\ ``links``
-       -  Pointer to a links array allocated by the application. Ignored if
-	  NULL.
-
-    *  -  __u32
-       -  ``reserved[4]``
-       -  Reserved for future extensions. Drivers and applications must set
-          the array to zero.
-
-
-.. c:type:: media_pad_desc
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct media_pad_desc
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    *  -  __u32
-       -  ``entity``
-       -  ID of the entity this pad belongs to.
-
-    *  -  __u16
-       -  ``index``
-       -  Pad index, starts at 0.
-
-    *  -  __u32
-       -  ``flags``
-       -  Pad flags, see :ref:`media-pad-flag` for more details.
-
-    *  -  __u32
-       -  ``reserved[2]``
-       -  Reserved for future extensions. Drivers and applications must set
-          the array to zero.
-
-
-
-.. c:type:: media_link_desc
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct media_link_desc
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    *  -  struct :c:type:`media_pad_desc`
-       -  ``source``
-       -  Pad at the origin of this link.
-
-    *  -  struct :c:type:`media_pad_desc`
-       -  ``sink``
-       -  Pad at the target of this link.
-
-    *  -  __u32
-       -  ``flags``
-       -  Link flags, see :ref:`media-link-flag` for more details.
-
-    *  -  __u32
-       -  ``reserved[2]``
-       -  Reserved for future extensions. Drivers and applications must set
-          the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`media_links_enum` ``id``
-    references a non-existing entity.
diff --git a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst
deleted file mode 100644
index 0a7d76ac8ded..000000000000
--- a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst
+++ /dev/null
@@ -1,307 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media_ioc_g_topology:
-
-**************************
-ioctl MEDIA_IOC_G_TOPOLOGY
-**************************
-
-Name
-====
-
-MEDIA_IOC_G_TOPOLOGY - Enumerate the graph topology and graph element properties
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, MEDIA_IOC_G_TOPOLOGY, struct media_v2_topology *argp )
-    :name: MEDIA_IOC_G_TOPOLOGY
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <media-func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`media_v2_topology`.
-
-
-Description
-===========
-
-The typical usage of this ioctl is to call it twice. On the first call,
-the structure defined at struct
-:c:type:`media_v2_topology` should be zeroed. At
-return, if no errors happen, this ioctl will return the
-``topology_version`` and the total number of entities, interfaces, pads
-and links.
-
-Before the second call, the userspace should allocate arrays to store
-the graph elements that are desired, putting the pointers to them at the
-ptr_entities, ptr_interfaces, ptr_links and/or ptr_pads, keeping the
-other values untouched.
-
-If the ``topology_version`` remains the same, the ioctl should fill the
-desired arrays with the media graph elements.
-
-.. tabularcolumns:: |p{1.6cm}|p{3.4cm}|p{12.5cm}|
-
-.. c:type:: media_v2_topology
-
-.. flat-table:: struct media_v2_topology
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 2 8
-
-    *  -  __u64
-       -  ``topology_version``
-       -  Version of the media graph topology. When the graph is created,
-	  this field starts with zero. Every time a graph element is added
-	  or removed, this field is incremented.
-
-    *  -  __u32
-       -  ``num_entities``
-       -  Number of entities in the graph
-
-    *  -  __u32
-       -  ``reserved1``
-       -  Applications and drivers shall set this to 0.
-
-    *  -  __u64
-       -  ``ptr_entities``
-       -  A pointer to a memory area where the entities array will be
-	  stored, converted to a 64-bits integer. It can be zero. if zero,
-	  the ioctl won't store the entities. It will just update
-	  ``num_entities``
-
-    *  -  __u32
-       -  ``num_interfaces``
-       -  Number of interfaces in the graph
-
-    *  -  __u32
-       -  ``reserved2``
-       -  Applications and drivers shall set this to 0.
-
-    *  -  __u64
-       -  ``ptr_interfaces``
-       -  A pointer to a memory area where the interfaces array will be
-	  stored, converted to a 64-bits integer. It can be zero. if zero,
-	  the ioctl won't store the interfaces. It will just update
-	  ``num_interfaces``
-
-    *  -  __u32
-       -  ``num_pads``
-       -  Total number of pads in the graph
-
-    *  -  __u32
-       -  ``reserved3``
-       -  Applications and drivers shall set this to 0.
-
-    *  -  __u64
-       -  ``ptr_pads``
-       -  A pointer to a memory area where the pads array will be stored,
-	  converted to a 64-bits integer. It can be zero. if zero, the ioctl
-	  won't store the pads. It will just update ``num_pads``
-
-    *  -  __u32
-       -  ``num_links``
-       -  Total number of data and interface links in the graph
-
-    *  -  __u32
-       -  ``reserved4``
-       -  Applications and drivers shall set this to 0.
-
-    *  -  __u64
-       -  ``ptr_links``
-       -  A pointer to a memory area where the links array will be stored,
-	  converted to a 64-bits integer. It can be zero. if zero, the ioctl
-	  won't store the links. It will just update ``num_links``
-
-
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
-
-.. c:type:: media_v2_entity
-
-.. flat-table:: struct media_v2_entity
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 2 8
-
-    *  -  __u32
-       -  ``id``
-       -  Unique ID for the entity. Do not expect that the ID will
-	  always be the same for each instance of the device. In other words,
-	  do not hardcode entity IDs in an application.
-
-    *  -  char
-       -  ``name``\ [64]
-       -  Entity name as an UTF-8 NULL-terminated string. This name must be unique
-          within the media topology.
-
-    *  -  __u32
-       -  ``function``
-       -  Entity main function, see :ref:`media-entity-functions` for details.
-
-    *  -  __u32
-       -  ``flags``
-       -  Entity flags, see :ref:`media-entity-flag` for details.
-	  Only valid if ``MEDIA_V2_ENTITY_HAS_FLAGS(media_version)``
-	  returns true. The ``media_version`` is defined in struct
-	  :c:type:`media_device_info` and can be retrieved using
-	  :ref:`MEDIA_IOC_DEVICE_INFO`.
-
-    *  -  __u32
-       -  ``reserved``\ [5]
-       -  Reserved for future extensions. Drivers and applications must set
-	  this array to zero.
-
-
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
-
-.. c:type:: media_v2_interface
-
-.. flat-table:: struct media_v2_interface
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 2 8
-
-    *  -  __u32
-       -  ``id``
-       -  Unique ID for the interface. Do not expect that the ID will
-	  always be the same for each instance of the device. In other words,
-	  do not hardcode interface IDs in an application.
-
-    *  -  __u32
-       -  ``intf_type``
-       -  Interface type, see :ref:`media-intf-type` for details.
-
-    *  -  __u32
-       -  ``flags``
-       -  Interface flags. Currently unused.
-
-    *  -  __u32
-       -  ``reserved``\ [9]
-       -  Reserved for future extensions. Drivers and applications must set
-	  this array to zero.
-
-    *  -  struct media_v2_intf_devnode
-       -  ``devnode``
-       -  Used only for device node interfaces. See
-	  :c:type:`media_v2_intf_devnode` for details.
-
-
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
-
-.. c:type:: media_v2_intf_devnode
-
-.. flat-table:: struct media_v2_intf_devnode
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 2 8
-
-    *  -  __u32
-       -  ``major``
-       -  Device node major number.
-
-    *  -  __u32
-       -  ``minor``
-       -  Device node minor number.
-
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
-
-.. c:type:: media_v2_pad
-
-.. flat-table:: struct media_v2_pad
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 2 8
-
-    *  -  __u32
-       -  ``id``
-       -  Unique ID for the pad. Do not expect that the ID will
-	  always be the same for each instance of the device. In other words,
-	  do not hardcode pad IDs in an application.
-
-    *  -  __u32
-       -  ``entity_id``
-       -  Unique ID for the entity where this pad belongs.
-
-    *  -  __u32
-       -  ``flags``
-       -  Pad flags, see :ref:`media-pad-flag` for more details.
-
-    *  -  __u32
-       -  ``index``
-       -  Pad index, starts at 0. Only valid if ``MEDIA_V2_PAD_HAS_INDEX(media_version)``
-	  returns true. The ``media_version`` is defined in struct
-	  :c:type:`media_device_info` and can be retrieved using
-	  :ref:`MEDIA_IOC_DEVICE_INFO`.
-
-    *  -  __u32
-       -  ``reserved``\ [4]
-       -  Reserved for future extensions. Drivers and applications must set
-	  this array to zero.
-
-
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
-
-.. c:type:: media_v2_link
-
-.. flat-table:: struct media_v2_link
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 2 8
-
-    *  -  __u32
-       -  ``id``
-       -  Unique ID for the link. Do not expect that the ID will
-	  always be the same for each instance of the device. In other words,
-	  do not hardcode link IDs in an application.
-
-    *  -  __u32
-       -  ``source_id``
-       -  On pad to pad links: unique ID for the source pad.
-
-	  On interface to entity links: unique ID for the interface.
-
-    *  -  __u32
-       -  ``sink_id``
-       -  On pad to pad links: unique ID for the sink pad.
-
-	  On interface to entity links: unique ID for the entity.
-
-    *  -  __u32
-       -  ``flags``
-       -  Link flags, see :ref:`media-link-flag` for more details.
-
-    *  -  __u32
-       -  ``reserved``\ [6]
-       -  Reserved for future extensions. Drivers and applications must set
-	  this array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-ENOSPC
-    This is returned when either one or more of the num_entities,
-    num_interfaces, num_links or num_pads are non-zero and are
-    smaller than the actual number of elements inside the graph. This
-    may happen if the ``topology_version`` changed when compared to the
-    last time this ioctl was called. Userspace should usually free the
-    area for the pointers, zero the struct elements and call this ioctl
-    again.
diff --git a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst
deleted file mode 100644
index 6d4ca4ada2e0..000000000000
--- a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst
+++ /dev/null
@@ -1,90 +0,0 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-..    modify it under the terms of the GNU General Public License as
-..    published by the Free Software Foundation version 2 of
-..    the License.
-..
-..    This file is distributed in the hope that it will be useful,
-..    but WITHOUT ANY WARRANTY; without even the implied warranty of
-..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-..    GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-..    document under the terms of the GNU Free Documentation License,
-..    Version 1.1 or any later version published by the Free Software
-..    Foundation, with no Invariant Sections, no Front-Cover Texts
-..    and no Back-Cover Texts. A copy of the license is included at
-..    Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media_ioc_request_alloc:
-
-*****************************
-ioctl MEDIA_IOC_REQUEST_ALLOC
-*****************************
-
-Name
-====
-
-MEDIA_IOC_REQUEST_ALLOC - Allocate a request
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, MEDIA_IOC_REQUEST_ALLOC, int *argp )
-    :name: MEDIA_IOC_REQUEST_ALLOC
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <media-func-open>`.
-
-``argp``
-    Pointer to an integer.
-
-
-Description
-===========
-
-If the media device supports :ref:`requests <media-request-api>`, then
-this ioctl can be used to allocate a request. If it is not supported, then
-``errno`` is set to ``ENOTTY``. A request is accessed through a file descriptor
-that is returned in ``*argp``.
-
-If the request was successfully allocated, then the request file descriptor
-can be passed to the :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`,
-:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
-:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and
-:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctls.
-
-In addition, the request can be queued by calling
-:ref:`MEDIA_REQUEST_IOC_QUEUE` and re-initialized by calling
-:ref:`MEDIA_REQUEST_IOC_REINIT`.
-
-Finally, the file descriptor can be :ref:`polled <request-func-poll>` to wait
-for the request to complete.
-
-The request will remain allocated until all the file descriptors associated
-with it are closed by :ref:`close() <request-func-close>` and the driver no
-longer uses the request internally. See also
-:ref:`here <media-request-life-time>` for more information.
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-ENOTTY
-    The driver has no support for requests.
diff --git a/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst b/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst
deleted file mode 100644
index ae39dbbe48a0..000000000000
--- a/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst
+++ /dev/null
@@ -1,74 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media_ioc_setup_link:
-
-**************************
-ioctl MEDIA_IOC_SETUP_LINK
-**************************
-
-Name
-====
-
-MEDIA_IOC_SETUP_LINK - Modify the properties of a link
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, MEDIA_IOC_SETUP_LINK, struct media_link_desc *argp )
-    :name: MEDIA_IOC_SETUP_LINK
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <media-func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`media_link_desc`.
-
-
-Description
-===========
-
-To change link properties applications fill a struct
-:c:type:`media_link_desc` with link identification
-information (source and sink pad) and the new requested link flags. They
-then call the MEDIA_IOC_SETUP_LINK ioctl with a pointer to that
-structure.
-
-The only configurable property is the ``ENABLED`` link flag to
-enable/disable a link. Links marked with the ``IMMUTABLE`` link flag can
-not be enabled or disabled.
-
-Link configuration has no side effect on other links. If an enabled link
-at the sink pad prevents the link from being enabled, the driver returns
-with an ``EBUSY`` error code.
-
-Only links marked with the ``DYNAMIC`` link flag can be enabled/disabled
-while streaming media data. Attempting to enable or disable a streaming
-non-dynamic link will return an ``EBUSY`` error code.
-
-If the specified link can't be found the driver returns with an ``EINVAL``
-error code.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`media_link_desc` references a
-    non-existing link, or the link is immutable and an attempt to modify
-    its configuration was made.
diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst
deleted file mode 100644
index fc8458746d51..000000000000
--- a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst
+++ /dev/null
@@ -1,102 +0,0 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-..    modify it under the terms of the GNU General Public License as
-..    published by the Free Software Foundation version 2 of
-..    the License.
-..
-..    This file is distributed in the hope that it will be useful,
-..    but WITHOUT ANY WARRANTY; without even the implied warranty of
-..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-..    GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-..    document under the terms of the GNU Free Documentation License,
-..    Version 1.1 or any later version published by the Free Software
-..    Foundation, with no Invariant Sections, no Front-Cover Texts
-..    and no Back-Cover Texts. A copy of the license is included at
-..    Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media_request_ioc_queue:
-
-*****************************
-ioctl MEDIA_REQUEST_IOC_QUEUE
-*****************************
-
-Name
-====
-
-MEDIA_REQUEST_IOC_QUEUE - Queue a request
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int request_fd, MEDIA_REQUEST_IOC_QUEUE )
-    :name: MEDIA_REQUEST_IOC_QUEUE
-
-
-Arguments
-=========
-
-``request_fd``
-    File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
-
-
-Description
-===========
-
-If the media device supports :ref:`requests <media-request-api>`, then
-this request ioctl can be used to queue a previously allocated request.
-
-If the request was successfully queued, then the file descriptor can be
-:ref:`polled <request-func-poll>` to wait for the request to complete.
-
-If the request was already queued before, then ``EBUSY`` is returned.
-Other errors can be returned if the contents of the request contained
-invalid or inconsistent data, see the next section for a list of
-common error codes. On error both the request and driver state are unchanged.
-
-Once a request is queued, then the driver is required to gracefully handle
-errors that occur when the request is applied to the hardware. The
-exception is the ``EIO`` error which signals a fatal error that requires
-the application to stop streaming to reset the hardware state.
-
-It is not allowed to mix queuing requests with queuing buffers directly
-(without a request). ``EBUSY`` will be returned if the first buffer was
-queued directly and you next try to queue a request, or vice versa.
-
-A request must contain at least one buffer, otherwise this ioctl will
-return an ``ENOENT`` error.
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EBUSY
-    The request was already queued or the application queued the first
-    buffer directly, but later attempted to use a request. It is not permitted
-    to mix the two APIs.
-ENOENT
-    The request did not contain any buffers. All requests are required
-    to have at least one buffer. This can also be returned if some required
-    configuration is missing in the request.
-ENOMEM
-    Out of memory when allocating internal data structures for this
-    request.
-EINVAL
-    The request has invalid data.
-EIO
-    The hardware is in a bad state. To recover, the application needs to
-    stop streaming to reset the hardware state and then try to restart
-    streaming.
diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst
deleted file mode 100644
index 61381e87665a..000000000000
--- a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst
+++ /dev/null
@@ -1,75 +0,0 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-..    modify it under the terms of the GNU General Public License as
-..    published by the Free Software Foundation version 2 of
-..    the License.
-..
-..    This file is distributed in the hope that it will be useful,
-..    but WITHOUT ANY WARRANTY; without even the implied warranty of
-..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-..    GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-..    document under the terms of the GNU Free Documentation License,
-..    Version 1.1 or any later version published by the Free Software
-..    Foundation, with no Invariant Sections, no Front-Cover Texts
-..    and no Back-Cover Texts. A copy of the license is included at
-..    Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media_request_ioc_reinit:
-
-******************************
-ioctl MEDIA_REQUEST_IOC_REINIT
-******************************
-
-Name
-====
-
-MEDIA_REQUEST_IOC_REINIT - Re-initialize a request
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int request_fd, MEDIA_REQUEST_IOC_REINIT )
-    :name: MEDIA_REQUEST_IOC_REINIT
-
-
-Arguments
-=========
-
-``request_fd``
-    File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
-
-Description
-===========
-
-If the media device supports :ref:`requests <media-request-api>`, then
-this request ioctl can be used to re-initialize a previously allocated
-request.
-
-Re-initializing a request will clear any existing data from the request.
-This avoids having to :ref:`close() <request-func-close>` a completed
-request and allocate a new request. Instead the completed request can just
-be re-initialized and it is ready to be used again.
-
-A request can only be re-initialized if it either has not been queued
-yet, or if it was queued and completed. Otherwise it will set ``errno``
-to ``EBUSY``. No other error codes can be returned.
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately.
-
-EBUSY
-    The request is queued but not yet completed.
diff --git a/Documentation/media/uapi/mediactl/media-types.rst b/Documentation/media/uapi/mediactl/media-types.rst
deleted file mode 100644
index 3af6a414b501..000000000000
--- a/Documentation/media/uapi/mediactl/media-types.rst
+++ /dev/null
@@ -1,425 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media-controller-types:
-
-Types and flags used to represent the media graph elements
-==========================================================
-
-..  tabularcolumns:: |p{8.2cm}|p{10.3cm}|
-
-.. _media-entity-functions:
-.. _MEDIA-ENT-F-UNKNOWN:
-.. _MEDIA-ENT-F-V4L2-SUBDEV-UNKNOWN:
-.. _MEDIA-ENT-F-IO-V4L:
-.. _MEDIA-ENT-F-IO-VBI:
-.. _MEDIA-ENT-F-IO-SWRADIO:
-.. _MEDIA-ENT-F-IO-DTV:
-.. _MEDIA-ENT-F-DTV-DEMOD:
-.. _MEDIA-ENT-F-TS-DEMUX:
-.. _MEDIA-ENT-F-DTV-CA:
-.. _MEDIA-ENT-F-DTV-NET-DECAP:
-.. _MEDIA-ENT-F-CONN-RF:
-.. _MEDIA-ENT-F-CONN-SVIDEO:
-.. _MEDIA-ENT-F-CONN-COMPOSITE:
-.. _MEDIA-ENT-F-CAM-SENSOR:
-.. _MEDIA-ENT-F-FLASH:
-.. _MEDIA-ENT-F-LENS:
-.. _MEDIA-ENT-F-ATV-DECODER:
-.. _MEDIA-ENT-F-TUNER:
-.. _MEDIA-ENT-F-IF-VID-DECODER:
-.. _MEDIA-ENT-F-IF-AUD-DECODER:
-.. _MEDIA-ENT-F-AUDIO-CAPTURE:
-.. _MEDIA-ENT-F-AUDIO-PLAYBACK:
-.. _MEDIA-ENT-F-AUDIO-MIXER:
-.. _MEDIA-ENT-F-PROC-VIDEO-COMPOSER:
-.. _MEDIA-ENT-F-PROC-VIDEO-PIXEL-FORMATTER:
-.. _MEDIA-ENT-F-PROC-VIDEO-PIXEL-ENC-CONV:
-.. _MEDIA-ENT-F-PROC-VIDEO-LUT:
-.. _MEDIA-ENT-F-PROC-VIDEO-SCALER:
-.. _MEDIA-ENT-F-PROC-VIDEO-STATISTICS:
-.. _MEDIA-ENT-F-PROC-VIDEO-ENCODER:
-.. _MEDIA-ENT-F-PROC-VIDEO-DECODER:
-.. _MEDIA-ENT-F-VID-MUX:
-.. _MEDIA-ENT-F-VID-IF-BRIDGE:
-.. _MEDIA-ENT-F-DV-DECODER:
-.. _MEDIA-ENT-F-DV-ENCODER:
-
-.. cssclass:: longtable
-
-.. flat-table:: Media entity functions
-    :header-rows:  0
-    :stub-columns: 0
-
-    *  -  ``MEDIA_ENT_F_UNKNOWN`` and
-	  ``MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN``
-       -  Unknown entity. That generally indicates that a driver didn't
-	  initialize properly the entity, which is a Kernel bug
-
-    *  -  ``MEDIA_ENT_F_IO_V4L``
-       -  Data streaming input and/or output entity.
-
-    *  -  ``MEDIA_ENT_F_IO_VBI``
-       -  V4L VBI streaming input or output entity
-
-    *  -  ``MEDIA_ENT_F_IO_SWRADIO``
-       -  V4L Software Digital Radio (SDR) streaming input or output entity
-
-    *  -  ``MEDIA_ENT_F_IO_DTV``
-       -  DVB Digital TV streaming input or output entity
-
-    *  -  ``MEDIA_ENT_F_DTV_DEMOD``
-       -  Digital TV demodulator entity.
-
-    *  -  ``MEDIA_ENT_F_TS_DEMUX``
-       -  MPEG Transport stream demux entity. Could be implemented on
-	  hardware or in Kernelspace by the Linux DVB subsystem.
-
-    *  -  ``MEDIA_ENT_F_DTV_CA``
-       -  Digital TV Conditional Access module (CAM) entity
-
-    *  -  ``MEDIA_ENT_F_DTV_NET_DECAP``
-       -  Digital TV network ULE/MLE desencapsulation entity. Could be
-	  implemented on hardware or in Kernelspace
-
-    *  -  ``MEDIA_ENT_F_CONN_RF``
-       -  Connector for a Radio Frequency (RF) signal.
-
-    *  -  ``MEDIA_ENT_F_CONN_SVIDEO``
-       -  Connector for a S-Video signal.
-
-    *  -  ``MEDIA_ENT_F_CONN_COMPOSITE``
-       -  Connector for a RGB composite signal.
-
-    *  -  ``MEDIA_ENT_F_CAM_SENSOR``
-       -  Camera video sensor entity.
-
-    *  -  ``MEDIA_ENT_F_FLASH``
-       -  Flash controller entity.
-
-    *  -  ``MEDIA_ENT_F_LENS``
-       -  Lens controller entity.
-
-    *  -  ``MEDIA_ENT_F_ATV_DECODER``
-       -  Analog video decoder, the basic function of the video decoder is
-	  to accept analogue video from a wide variety of sources such as
-	  broadcast, DVD players, cameras and video cassette recorders, in
-	  either NTSC, PAL, SECAM or HD format, separating the stream into
-	  its component parts, luminance and chrominance, and output it in
-	  some digital video standard, with appropriate timing signals.
-
-    *  -  ``MEDIA_ENT_F_TUNER``
-       -  Digital TV, analog TV, radio and/or software radio tuner, with
-	  consists on a PLL tuning stage that converts radio frequency (RF)
-	  signal into an Intermediate Frequency (IF). Modern tuners have
-	  internally IF-PLL decoders for audio and video, but older models
-	  have those stages implemented on separate entities.
-
-    *  -  ``MEDIA_ENT_F_IF_VID_DECODER``
-       -  IF-PLL video decoder. It receives the IF from a PLL and decodes
-	  the analog TV video signal. This is commonly found on some very
-	  old analog tuners, like Philips MK3 designs. They all contain a
-	  tda9887 (or some software compatible similar chip, like tda9885).
-	  Those devices use a different I2C address than the tuner PLL.
-
-    *  -  ``MEDIA_ENT_F_IF_AUD_DECODER``
-       -  IF-PLL sound decoder. It receives the IF from a PLL and decodes
-	  the analog TV audio signal. This is commonly found on some very
-	  old analog hardware, like Micronas msp3400, Philips tda9840,
-	  tda985x, etc. Those devices use a different I2C address than the
-	  tuner PLL and should be controlled together with the IF-PLL video
-	  decoder.
-
-    *  -  ``MEDIA_ENT_F_AUDIO_CAPTURE``
-       -  Audio Capture Function Entity.
-
-    *  -  ``MEDIA_ENT_F_AUDIO_PLAYBACK``
-       -  Audio Playback Function Entity.
-
-    *  -  ``MEDIA_ENT_F_AUDIO_MIXER``
-       -  Audio Mixer Function Entity.
-
-    *  -  ``MEDIA_ENT_F_PROC_VIDEO_COMPOSER``
-       -  Video composer (blender). An entity capable of video
-	  composing must have at least two sink pads and one source
-	  pad, and composes input video frames onto output video
-	  frames. Composition can be performed using alpha blending,
-	  color keying, raster operations (ROP), stitching or any other
-	  means.
-
-    *  -  ``MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER``
-       -  Video pixel formatter. An entity capable of pixel formatting
-	  must have at least one sink pad and one source pad. Read
-	  pixel formatters read pixels from memory and perform a subset
-	  of unpacking, cropping, color keying, alpha multiplication
-	  and pixel encoding conversion. Write pixel formatters perform
-	  a subset of dithering, pixel encoding conversion and packing
-	  and write pixels to memory.
-
-    *  -  ``MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV``
-       -  Video pixel encoding converter. An entity capable of pixel
-	  encoding conversion must have at least one sink pad and one
-	  source pad, and convert the encoding of pixels received on
-	  its sink pad(s) to a different encoding output on its source
-	  pad(s). Pixel encoding conversion includes but isn't limited
-	  to RGB to/from HSV, RGB to/from YUV and CFA (Bayer) to RGB
-	  conversions.
-
-    *  -  ``MEDIA_ENT_F_PROC_VIDEO_LUT``
-       -  Video look-up table. An entity capable of video lookup table
-	  processing must have one sink pad and one source pad. It uses
-	  the values of the pixels received on its sink pad to look up
-	  entries in internal tables and output them on its source pad.
-	  The lookup processing can be performed on all components
-	  separately or combine them for multi-dimensional table
-	  lookups.
-
-    *  -  ``MEDIA_ENT_F_PROC_VIDEO_SCALER``
-       -  Video scaler. An entity capable of video scaling must have
-	  at least one sink pad and one source pad, and scale the
-	  video frame(s) received on its sink pad(s) to a different
-	  resolution output on its source pad(s). The range of
-	  supported scaling ratios is entity-specific and can differ
-	  between the horizontal and vertical directions (in particular
-	  scaling can be supported in one direction only). Binning and
-	  sub-sampling (occasionally also referred to as skipping) are
-	  considered as scaling.
-
-    *  -  ``MEDIA_ENT_F_PROC_VIDEO_STATISTICS``
-       -  Video statistics computation (histogram, 3A, etc.). An entity
-	  capable of statistics computation must have one sink pad and
-	  one source pad. It computes statistics over the frames
-	  received on its sink pad and outputs the statistics data on
-	  its source pad.
-
-    *  -  ``MEDIA_ENT_F_PROC_VIDEO_ENCODER``
-       -  Video (MPEG, HEVC, VPx, etc.) encoder. An entity capable of
-          compressing video frames. Must have one sink pad and at least
-	  one source pad.
-
-    *  -  ``MEDIA_ENT_F_PROC_VIDEO_DECODER``
-       -  Video (MPEG, HEVC, VPx, etc.) decoder. An entity capable of
-          decompressing a compressed video stream into uncompressed video
-	  frames. Must have one sink pad and at least one source pad.
-
-    *  -  ``MEDIA_ENT_F_VID_MUX``
-       - Video multiplexer. An entity capable of multiplexing must have at
-         least two sink pads and one source pad, and must pass the video
-         frame(s) received from the active sink pad to the source pad.
-
-    *  -  ``MEDIA_ENT_F_VID_IF_BRIDGE``
-       - Video interface bridge. A video interface bridge entity must have at
-         least one sink pad and at least one source pad. It receives video
-         frames on its sink pad from an input video bus of one type (HDMI, eDP,
-         MIPI CSI-2, etc.), and outputs them on its source pad to an output
-         video bus of another type (eDP, MIPI CSI-2, parallel, etc.).
-
-    *  -  ``MEDIA_ENT_F_DV_DECODER``
-       -  Digital video decoder. The basic function of the video decoder is
-	  to accept digital video from a wide variety of sources
-	  and output it in some digital video standard, with appropriate
-	  timing signals.
-
-    *  -  ``MEDIA_ENT_F_DV_ENCODER``
-       -  Digital video encoder. The basic function of the video encoder is
-	  to accept digital video from some digital video standard with
-	  appropriate timing signals (usually a parallel video bus with sync
-	  signals) and output this to a digital video output connector such
-	  as HDMI or DisplayPort.
-
-..  tabularcolumns:: |p{5.5cm}|p{12.0cm}|
-
-.. _media-entity-flag:
-.. _MEDIA-ENT-FL-DEFAULT:
-.. _MEDIA-ENT-FL-CONNECTOR:
-
-.. flat-table:: Media entity flags
-    :header-rows:  0
-    :stub-columns: 0
-
-    *  -  ``MEDIA_ENT_FL_DEFAULT``
-       -  Default entity for its type. Used to discover the default audio,
-	  VBI and video devices, the default camera sensor, etc.
-
-    *  -  ``MEDIA_ENT_FL_CONNECTOR``
-       -  The entity represents a connector.
-
-
-..  tabularcolumns:: |p{6.5cm}|p{6.0cm}|p{5.0cm}|
-
-.. _media-intf-type:
-.. _MEDIA-INTF-T-DVB-FE:
-.. _MEDIA-INTF-T-DVB-DEMUX:
-.. _MEDIA-INTF-T-DVB-DVR:
-.. _MEDIA-INTF-T-DVB-CA:
-.. _MEDIA-INTF-T-DVB-NET:
-.. _MEDIA-INTF-T-V4L-VIDEO:
-.. _MEDIA-INTF-T-V4L-VBI:
-.. _MEDIA-INTF-T-V4L-RADIO:
-.. _MEDIA-INTF-T-V4L-SUBDEV:
-.. _MEDIA-INTF-T-V4L-SWRADIO:
-.. _MEDIA-INTF-T-V4L-TOUCH:
-.. _MEDIA-INTF-T-ALSA-PCM-CAPTURE:
-.. _MEDIA-INTF-T-ALSA-PCM-PLAYBACK:
-.. _MEDIA-INTF-T-ALSA-CONTROL:
-.. _MEDIA-INTF-T-ALSA-COMPRESS:
-.. _MEDIA-INTF-T-ALSA-RAWMIDI:
-.. _MEDIA-INTF-T-ALSA-HWDEP:
-.. _MEDIA-INTF-T-ALSA-SEQUENCER:
-.. _MEDIA-INTF-T-ALSA-TIMER:
-
-.. flat-table:: Media interface types
-    :header-rows:  0
-    :stub-columns: 0
-
-    *  -  ``MEDIA_INTF_T_DVB_FE``
-       -  Device node interface for the Digital TV frontend
-       -  typically, /dev/dvb/adapter?/frontend?
-
-    *  -  ``MEDIA_INTF_T_DVB_DEMUX``
-       -  Device node interface for the Digital TV demux
-       -  typically, /dev/dvb/adapter?/demux?
-
-    *  -  ``MEDIA_INTF_T_DVB_DVR``
-       -  Device node interface for the Digital TV DVR
-       -  typically, /dev/dvb/adapter?/dvr?
-
-    *  -  ``MEDIA_INTF_T_DVB_CA``
-       -  Device node interface for the Digital TV Conditional Access
-       -  typically, /dev/dvb/adapter?/ca?
-
-    *  -  ``MEDIA_INTF_T_DVB_NET``
-       -  Device node interface for the Digital TV network control
-       -  typically, /dev/dvb/adapter?/net?
-
-    *  -  ``MEDIA_INTF_T_V4L_VIDEO``
-       -  Device node interface for video (V4L)
-       -  typically, /dev/video?
-
-    *  -  ``MEDIA_INTF_T_V4L_VBI``
-       -  Device node interface for VBI (V4L)
-       -  typically, /dev/vbi?
-
-    *  -  ``MEDIA_INTF_T_V4L_RADIO``
-       -  Device node interface for radio (V4L)
-       -  typically, /dev/radio?
-
-    *  -  ``MEDIA_INTF_T_V4L_SUBDEV``
-       -  Device node interface for a V4L subdevice
-       -  typically, /dev/v4l-subdev?
-
-    *  -  ``MEDIA_INTF_T_V4L_SWRADIO``
-       -  Device node interface for Software Defined Radio (V4L)
-       -  typically, /dev/swradio?
-
-    *  -  ``MEDIA_INTF_T_V4L_TOUCH``
-       -  Device node interface for Touch device (V4L)
-       -  typically, /dev/v4l-touch?
-
-    *  -  ``MEDIA_INTF_T_ALSA_PCM_CAPTURE``
-       -  Device node interface for ALSA PCM Capture
-       -  typically, /dev/snd/pcmC?D?c
-
-    *  -  ``MEDIA_INTF_T_ALSA_PCM_PLAYBACK``
-       -  Device node interface for ALSA PCM Playback
-       -  typically, /dev/snd/pcmC?D?p
-
-    *  -  ``MEDIA_INTF_T_ALSA_CONTROL``
-       -  Device node interface for ALSA Control
-       -  typically, /dev/snd/controlC?
-
-    *  -  ``MEDIA_INTF_T_ALSA_COMPRESS``
-       -  Device node interface for ALSA Compress
-       -  typically, /dev/snd/compr?
-
-    *  -  ``MEDIA_INTF_T_ALSA_RAWMIDI``
-       -  Device node interface for ALSA Raw MIDI
-       -  typically, /dev/snd/midi?
-
-    *  -  ``MEDIA_INTF_T_ALSA_HWDEP``
-       -  Device node interface for ALSA Hardware Dependent
-       -  typically, /dev/snd/hwC?D?
-
-    *  -  ``MEDIA_INTF_T_ALSA_SEQUENCER``
-       -  Device node interface for ALSA Sequencer
-       -  typically, /dev/snd/seq
-
-    *  -  ``MEDIA_INTF_T_ALSA_TIMER``
-       -  Device node interface for ALSA Timer
-       -  typically, /dev/snd/timer
-
-
-.. tabularcolumns:: |p{5.5cm}|p{12.0cm}|
-
-.. _media-pad-flag:
-.. _MEDIA-PAD-FL-SINK:
-.. _MEDIA-PAD-FL-SOURCE:
-.. _MEDIA-PAD-FL-MUST-CONNECT:
-
-.. flat-table:: Media pad flags
-    :header-rows:  0
-    :stub-columns: 0
-
-    *  -  ``MEDIA_PAD_FL_SINK``
-       -  Input pad, relative to the entity. Input pads sink data and are
-	  targets of links.
-
-    *  -  ``MEDIA_PAD_FL_SOURCE``
-       -  Output pad, relative to the entity. Output pads source data and
-	  are origins of links.
-
-    *  -  ``MEDIA_PAD_FL_MUST_CONNECT``
-       -  If this flag is set and the pad is linked to any other pad, then
-	  at least one of those links must be enabled for the entity to be
-	  able to stream. There could be temporary reasons (e.g. device
-	  configuration dependent) for the pad to need enabled links even
-	  when this flag isn't set; the absence of the flag doesn't imply
-	  there is none.
-
-
-One and only one of ``MEDIA_PAD_FL_SINK`` and ``MEDIA_PAD_FL_SOURCE``
-must be set for every pad.
-
-.. tabularcolumns:: |p{5.5cm}|p{12.0cm}|
-
-.. _media-link-flag:
-.. _MEDIA-LNK-FL-ENABLED:
-.. _MEDIA-LNK-FL-IMMUTABLE:
-.. _MEDIA-LNK-FL-DYNAMIC:
-.. _MEDIA-LNK-FL-LINK-TYPE:
-
-.. flat-table:: Media link flags
-    :header-rows:  0
-    :stub-columns: 0
-
-    *  -  ``MEDIA_LNK_FL_ENABLED``
-       -  The link is enabled and can be used to transfer media data. When
-	  two or more links target a sink pad, only one of them can be
-	  enabled at a time.
-
-    *  -  ``MEDIA_LNK_FL_IMMUTABLE``
-       -  The link enabled state can't be modified at runtime. An immutable
-	  link is always enabled.
-
-    *  -  ``MEDIA_LNK_FL_DYNAMIC``
-       -  The link enabled state can be modified during streaming. This flag
-	  is set by drivers and is read-only for applications.
-
-    *  -  ``MEDIA_LNK_FL_LINK_TYPE``
-       -  This is a bitmask that defines the type of the link. Currently,
-	  two types of links are supported:
-
-	  .. _MEDIA-LNK-FL-DATA-LINK:
-
-	  ``MEDIA_LNK_FL_DATA_LINK`` if the link is between two pads
-
-	  .. _MEDIA-LNK-FL-INTERFACE-LINK:
-
-	  ``MEDIA_LNK_FL_INTERFACE_LINK`` if the link is between an
-	  interface and an entity
diff --git a/Documentation/media/uapi/mediactl/request-api.rst b/Documentation/media/uapi/mediactl/request-api.rst
deleted file mode 100644
index 01abe8103bdd..000000000000
--- a/Documentation/media/uapi/mediactl/request-api.rst
+++ /dev/null
@@ -1,276 +0,0 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-..    modify it under the terms of the GNU General Public License as
-..    published by the Free Software Foundation version 2 of
-..    the License.
-..
-..    This file is distributed in the hope that it will be useful,
-..    but WITHOUT ANY WARRANTY; without even the implied warranty of
-..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-..    GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-..    document under the terms of the GNU Free Documentation License,
-..    Version 1.1 or any later version published by the Free Software
-..    Foundation, with no Invariant Sections, no Front-Cover Texts
-..    and no Back-Cover Texts. A copy of the license is included at
-..    Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _media-request-api:
-
-Request API
-===========
-
-The Request API has been designed to allow V4L2 to deal with requirements of
-modern devices (stateless codecs, complex camera pipelines, ...) and APIs
-(Android Codec v2). One such requirement is the ability for devices belonging to
-the same pipeline to reconfigure and collaborate closely on a per-frame basis.
-Another is support of stateless codecs, which require controls to be applied
-to specific frames (aka 'per-frame controls') in order to be used efficiently.
-
-While the initial use-case was V4L2, it can be extended to other subsystems
-as well, as long as they use the media controller.
-
-Supporting these features without the Request API is not always possible and if
-it is, it is terribly inefficient: user-space would have to flush all activity
-on the media pipeline, reconfigure it for the next frame, queue the buffers to
-be processed with that configuration, and wait until they are all available for
-dequeuing before considering the next frame. This defeats the purpose of having
-buffer queues since in practice only one buffer would be queued at a time.
-
-The Request API allows a specific configuration of the pipeline (media
-controller topology + configuration for each media entity) to be associated with
-specific buffers. This allows user-space to schedule several tasks ("requests")
-with different configurations in advance, knowing that the configuration will be
-applied when needed to get the expected result. Configuration values at the time
-of request completion are also available for reading.
-
-General Usage
--------------
-
-The Request API extends the Media Controller API and cooperates with
-subsystem-specific APIs to support request usage. At the Media Controller
-level, requests are allocated from the supporting Media Controller device
-node. Their life cycle is then managed through the request file descriptors in
-an opaque way. Configuration data, buffer handles and processing results
-stored in requests are accessed through subsystem-specific APIs extended for
-request support, such as V4L2 APIs that take an explicit ``request_fd``
-parameter.
-
-Request Allocation
-------------------
-
-User-space allocates requests using :ref:`MEDIA_IOC_REQUEST_ALLOC`
-for the media device node. This returns a file descriptor representing the
-request. Typically, several such requests will be allocated.
-
-Request Preparation
--------------------
-
-Standard V4L2 ioctls can then receive a request file descriptor to express the
-fact that the ioctl is part of said request, and is not to be applied
-immediately. See :ref:`MEDIA_IOC_REQUEST_ALLOC` for a list of ioctls that
-support this. Configurations set with a ``request_fd`` parameter are stored
-instead of being immediately applied, and buffers queued to a request do not
-enter the regular buffer queue until the request itself is queued.
-
-Request Submission
-------------------
-
-Once the configuration and buffers of the request are specified, it can be
-queued by calling :ref:`MEDIA_REQUEST_IOC_QUEUE` on the request file descriptor.
-A request must contain at least one buffer, otherwise ``ENOENT`` is returned.
-A queued request cannot be modified anymore.
-
-.. caution::
-   For :ref:`memory-to-memory devices <mem2mem>` you can use requests only for
-   output buffers, not for capture buffers. Attempting to add a capture buffer
-   to a request will result in an ``EBADR`` error.
-
-If the request contains configurations for multiple entities, individual drivers
-may synchronize so the requested pipeline's topology is applied before the
-buffers are processed. Media controller drivers do a best effort implementation
-since perfect atomicity may not be possible due to hardware limitations.
-
-.. caution::
-
-   It is not allowed to mix queuing requests with directly queuing buffers:
-   whichever method is used first locks this in place until
-   :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called or the device is
-   :ref:`closed <func-close>`. Attempts to directly queue a buffer when earlier
-   a buffer was queued via a request or vice versa will result in an ``EBUSY``
-   error.
-
-Controls can still be set without a request and are applied immediately,
-regardless of whether a request is in use or not.
-
-.. caution::
-
-   Setting the same control through a request and also directly can lead to
-   undefined behavior!
-
-User-space can :ref:`poll() <request-func-poll>` a request file descriptor in
-order to wait until the request completes. A request is considered complete
-once all its associated buffers are available for dequeuing and all the
-associated controls have been updated with the values at the time of completion.
-Note that user-space does not need to wait for the request to complete to
-dequeue its buffers: buffers that are available halfway through a request can
-be dequeued independently of the request's state.
-
-A completed request contains the state of the device after the request was
-executed. User-space can query that state by calling
-:ref:`ioctl VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` with the request file
-descriptor. Calling :ref:`ioctl VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` for a
-request that has been queued but not yet completed will return ``EBUSY``
-since the control values might be changed at any time by the driver while the
-request is in flight.
-
-.. _media-request-life-time:
-
-Recycling and Destruction
--------------------------
-
-Finally, a completed request can either be discarded or be reused. Calling
-:ref:`close() <request-func-close>` on a request file descriptor will make
-that file descriptor unusable and the request will be freed once it is no
-longer in use by the kernel. That is, if the request is queued and then the
-file descriptor is closed, then it won't be freed until the driver completed
-the request.
-
-The :ref:`MEDIA_REQUEST_IOC_REINIT` will clear a request's state and make it
-available again. No state is retained by this operation: the request is as
-if it had just been allocated.
-
-Example for a Codec Device
---------------------------
-
-For use-cases such as :ref:`codecs <mem2mem>`, the request API can be used
-to associate specific controls to
-be applied by the driver for the OUTPUT buffer, allowing user-space
-to queue many such buffers in advance. It can also take advantage of requests'
-ability to capture the state of controls when the request completes to read back
-information that may be subject to change.
-
-Put into code, after obtaining a request, user-space can assign controls and one
-OUTPUT buffer to it:
-
-.. code-block:: c
-
-	struct v4l2_buffer buf;
-	struct v4l2_ext_controls ctrls;
-	int req_fd;
-	...
-	if (ioctl(media_fd, MEDIA_IOC_REQUEST_ALLOC, &req_fd))
-		return errno;
-	...
-	ctrls.which = V4L2_CTRL_WHICH_REQUEST_VAL;
-	ctrls.request_fd = req_fd;
-	if (ioctl(codec_fd, VIDIOC_S_EXT_CTRLS, &ctrls))
-		return errno;
-	...
-	buf.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-	buf.flags |= V4L2_BUF_FLAG_REQUEST_FD;
-	buf.request_fd = req_fd;
-	if (ioctl(codec_fd, VIDIOC_QBUF, &buf))
-		return errno;
-
-Note that it is not allowed to use the Request API for CAPTURE buffers
-since there are no per-frame settings to report there.
-
-Once the request is fully prepared, it can be queued to the driver:
-
-.. code-block:: c
-
-	if (ioctl(req_fd, MEDIA_REQUEST_IOC_QUEUE))
-		return errno;
-
-User-space can then either wait for the request to complete by calling poll() on
-its file descriptor, or start dequeuing CAPTURE buffers. Most likely, it will
-want to get CAPTURE buffers as soon as possible and this can be done using a
-regular :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`:
-
-.. code-block:: c
-
-	struct v4l2_buffer buf;
-
-	memset(&buf, 0, sizeof(buf));
-	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	if (ioctl(codec_fd, VIDIOC_DQBUF, &buf))
-		return errno;
-
-Note that this example assumes for simplicity that for every OUTPUT buffer
-there will be one CAPTURE buffer, but this does not have to be the case.
-
-We can then, after ensuring that the request is completed via polling the
-request file descriptor, query control values at the time of its completion via
-a call to :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`.
-This is particularly useful for volatile controls for which we want to
-query values as soon as the capture buffer is produced.
-
-.. code-block:: c
-
-	struct pollfd pfd = { .events = POLLPRI, .fd = req_fd };
-	poll(&pfd, 1, -1);
-	...
-	ctrls.which = V4L2_CTRL_WHICH_REQUEST_VAL;
-	ctrls.request_fd = req_fd;
-	if (ioctl(codec_fd, VIDIOC_G_EXT_CTRLS, &ctrls))
-		return errno;
-
-Once we don't need the request anymore, we can either recycle it for reuse with
-:ref:`MEDIA_REQUEST_IOC_REINIT`...
-
-.. code-block:: c
-
-	if (ioctl(req_fd, MEDIA_REQUEST_IOC_REINIT))
-		return errno;
-
-... or close its file descriptor to completely dispose of it.
-
-.. code-block:: c
-
-	close(req_fd);
-
-Example for a Simple Capture Device
------------------------------------
-
-With a simple capture device, requests can be used to specify controls to apply
-for a given CAPTURE buffer.
-
-.. code-block:: c
-
-	struct v4l2_buffer buf;
-	struct v4l2_ext_controls ctrls;
-	int req_fd;
-	...
-	if (ioctl(media_fd, MEDIA_IOC_REQUEST_ALLOC, &req_fd))
-		return errno;
-	...
-	ctrls.which = V4L2_CTRL_WHICH_REQUEST_VAL;
-	ctrls.request_fd = req_fd;
-	if (ioctl(camera_fd, VIDIOC_S_EXT_CTRLS, &ctrls))
-		return errno;
-	...
-	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	buf.flags |= V4L2_BUF_FLAG_REQUEST_FD;
-	buf.request_fd = req_fd;
-	if (ioctl(camera_fd, VIDIOC_QBUF, &buf))
-		return errno;
-
-Once the request is fully prepared, it can be queued to the driver:
-
-.. code-block:: c
-
-	if (ioctl(req_fd, MEDIA_REQUEST_IOC_QUEUE))
-		return errno;
-
-User-space can then dequeue buffers, wait for the request completion, query
-controls and recycle the request as in the M2M example above.
diff --git a/Documentation/media/uapi/mediactl/request-func-close.rst b/Documentation/media/uapi/mediactl/request-func-close.rst
deleted file mode 100644
index 2cff7770558e..000000000000
--- a/Documentation/media/uapi/mediactl/request-func-close.rst
+++ /dev/null
@@ -1,73 +0,0 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-..    modify it under the terms of the GNU General Public License as
-..    published by the Free Software Foundation version 2 of
-..    the License.
-..
-..    This file is distributed in the hope that it will be useful,
-..    but WITHOUT ANY WARRANTY; without even the implied warranty of
-..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-..    GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-..    document under the terms of the GNU Free Documentation License,
-..    Version 1.1 or any later version published by the Free Software
-..    Foundation, with no Invariant Sections, no Front-Cover Texts
-..    and no Back-Cover Texts. A copy of the license is included at
-..    Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _request-func-close:
-
-***************
-request close()
-***************
-
-Name
-====
-
-request-close - Close a request file descriptor
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-
-
-.. c:function:: int close( int fd )
-    :name: req-close
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
-
-
-Description
-===========
-
-Closes the request file descriptor. Resources associated with the request
-are freed once all file descriptors associated with the request are closed
-and the driver has completed the request.
-See :ref:`here <media-request-life-time>` for more information.
-
-
-Return Value
-============
-
-:ref:`close() <request-func-close>` returns 0 on success. On error, -1 is
-returned, and ``errno`` is set appropriately. Possible error codes are:
-
-EBADF
-    ``fd`` is not a valid open file descriptor.
diff --git a/Documentation/media/uapi/mediactl/request-func-ioctl.rst b/Documentation/media/uapi/mediactl/request-func-ioctl.rst
deleted file mode 100644
index de0781c61873..000000000000
--- a/Documentation/media/uapi/mediactl/request-func-ioctl.rst
+++ /dev/null
@@ -1,91 +0,0 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-..    modify it under the terms of the GNU General Public License as
-..    published by the Free Software Foundation version 2 of
-..    the License.
-..
-..    This file is distributed in the hope that it will be useful,
-..    but WITHOUT ANY WARRANTY; without even the implied warranty of
-..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-..    GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-..    document under the terms of the GNU Free Documentation License,
-..    Version 1.1 or any later version published by the Free Software
-..    Foundation, with no Invariant Sections, no Front-Cover Texts
-..    and no Back-Cover Texts. A copy of the license is included at
-..    Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _request-func-ioctl:
-
-***************
-request ioctl()
-***************
-
-Name
-====
-
-request-ioctl - Control a request file descriptor
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <sys/ioctl.h>
-
-
-.. c:function:: int ioctl( int fd, int cmd, void *argp )
-    :name: req-ioctl
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
-
-``cmd``
-    The request ioctl command code as defined in the media.h header file, for
-    example :ref:`MEDIA_REQUEST_IOC_QUEUE`.
-
-``argp``
-    Pointer to a request-specific structure.
-
-
-Description
-===========
-
-The :ref:`ioctl() <request-func-ioctl>` function manipulates request
-parameters. The argument ``fd`` must be an open file descriptor.
-
-The ioctl ``cmd`` code specifies the request function to be called. It
-has encoded in it whether the argument is an input, output or read/write
-parameter, and the size of the argument ``argp`` in bytes.
-
-Macros and structures definitions specifying request ioctl commands and
-their parameters are located in the media.h header file. All request ioctl
-commands, their respective function and parameters are specified in
-:ref:`media-user-func`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-Command-specific error codes are listed in the individual command
-descriptions.
-
-When an ioctl that takes an output or read/write parameter fails, the
-parameter remains unmodified.
diff --git a/Documentation/media/uapi/mediactl/request-func-poll.rst b/Documentation/media/uapi/mediactl/request-func-poll.rst
deleted file mode 100644
index ebaf33e21873..000000000000
--- a/Documentation/media/uapi/mediactl/request-func-poll.rst
+++ /dev/null
@@ -1,101 +0,0 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-..    modify it under the terms of the GNU General Public License as
-..    published by the Free Software Foundation version 2 of
-..    the License.
-..
-..    This file is distributed in the hope that it will be useful,
-..    but WITHOUT ANY WARRANTY; without even the implied warranty of
-..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-..    GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-..    document under the terms of the GNU Free Documentation License,
-..    Version 1.1 or any later version published by the Free Software
-..    Foundation, with no Invariant Sections, no Front-Cover Texts
-..    and no Back-Cover Texts. A copy of the license is included at
-..    Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _request-func-poll:
-
-**************
-request poll()
-**************
-
-Name
-====
-
-request-poll - Wait for some event on a file descriptor
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <sys/poll.h>
-
-
-.. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout )
-   :name: request-poll
-
-Arguments
-=========
-
-``ufds``
-   List of file descriptor events to be watched
-
-``nfds``
-   Number of file descriptor events at the \*ufds array
-
-``timeout``
-   Timeout to wait for events
-
-
-Description
-===========
-
-With the :c:func:`poll() <request-func-poll>` function applications can wait
-for a request to complete.
-
-On success :c:func:`poll() <request-func-poll>` returns the number of file
-descriptors that have been selected (that is, file descriptors for which the
-``revents`` field of the respective struct :c:type:`pollfd`
-is non-zero). Request file descriptor set the ``POLLPRI`` flag in ``revents``
-when the request was completed.  When the function times out it returns
-a value of zero, on failure it returns -1 and the ``errno`` variable is
-set appropriately.
-
-Attempting to poll for a request that is not yet queued will
-set the ``POLLERR`` flag in ``revents``.
-
-
-Return Value
-============
-
-On success, :c:func:`poll() <request-func-poll>` returns the number of
-structures which have non-zero ``revents`` fields, or zero if the call
-timed out. On error -1 is returned, and the ``errno`` variable is set
-appropriately:
-
-``EBADF``
-    One or more of the ``ufds`` members specify an invalid file
-    descriptor.
-
-``EFAULT``
-    ``ufds`` references an inaccessible memory area.
-
-``EINTR``
-    The call was interrupted by a signal.
-
-``EINVAL``
-    The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use
-    ``getrlimit()`` to obtain this value.
diff --git a/Documentation/media/uapi/rc/keytable.c.rst b/Documentation/media/uapi/rc/keytable.c.rst
deleted file mode 100644
index 46f98569e999..000000000000
--- a/Documentation/media/uapi/rc/keytable.c.rst
+++ /dev/null
@@ -1,183 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-file: uapi/v4l/keytable.c
-=========================
-
-.. code-block:: c
-
-    /* keytable.c - This program allows checking/replacing keys at IR
-
-       Copyright (C) 2006-2009 Mauro Carvalho Chehab <mchehab@kernel.org>
-
-       This program is free software; you can redistribute it and/or modify
-       it under the terms of the GNU General Public License as published by
-       the Free Software Foundation, version 2 of the License.
-
-       This program is distributed in the hope that it will be useful,
-       but WITHOUT ANY WARRANTY; without even the implied warranty of
-       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-       GNU General Public License for more details.
-     */
-
-    #include <ctype.h>
-    #include <errno.h>
-    #include <fcntl.h>
-    #include <stdio.h>
-    #include <stdlib.h>
-    #include <string.h>
-    #include <linux/input.h>
-    #include <sys/ioctl.h>
-
-    #include "parse.h"
-
-    void prtcode (int *codes)
-    {
-	    struct parse_key *p;
-
-	    for (p=keynames;p->name!=NULL;p++) {
-		    if (p->value == (unsigned)codes[1]) {
-			    printf("scancode 0x%04x = %s (0x%02x)\\n", codes[0], p->name, codes[1]);
-			    return;
-		    }
-	    }
-
-	    if (isprint (codes[1]))
-		    printf("scancode %d = '%c' (0x%02x)\\n", codes[0], codes[1], codes[1]);
-	    else
-		    printf("scancode %d = 0x%02x\\n", codes[0], codes[1]);
-    }
-
-    int parse_code(char *string)
-    {
-	    struct parse_key *p;
-
-	    for (p=keynames;p->name!=NULL;p++) {
-		    if (!strcasecmp(p->name, string)) {
-			    return p->value;
-		    }
-	    }
-	    return -1;
-    }
-
-    int main (int argc, char *argv[])
-    {
-	    int fd;
-	    unsigned int i, j;
-	    int codes[2];
-
-	    if (argc<2 || argc>4) {
-		    printf ("usage: %s <device> to get table; or\\n"
-			    "       %s <device> <scancode> <keycode>\\n"
-			    "       %s <device> <keycode_file>n",*argv,*argv,*argv);
-		    return -1;
-	    }
-
-	    if ((fd = open(argv[1], O_RDONLY)) < 0) {
-		    perror("Couldn't open input device");
-		    return(-1);
-	    }
-
-	    if (argc==4) {
-		    int value;
-
-		    value=parse_code(argv[3]);
-
-		    if (value==-1) {
-			    value = strtol(argv[3], NULL, 0);
-			    if (errno)
-				    perror("value");
-		    }
-
-		    codes [0] = (unsigned) strtol(argv[2], NULL, 0);
-		    codes [1] = (unsigned) value;
-
-		    if(ioctl(fd, EVIOCSKEYCODE, codes))
-			    perror ("EVIOCSKEYCODE");
-
-		    if(ioctl(fd, EVIOCGKEYCODE, codes)==0)
-			    prtcode(codes);
-		    return 0;
-	    }
-
-	    if (argc==3) {
-		    FILE *fin;
-		    int value;
-		    char *scancode, *keycode, s[2048];
-
-		    fin=fopen(argv[2],"r");
-		    if (fin==NULL) {
-			    perror ("opening keycode file");
-			    return -1;
-		    }
-
-		    /* Clears old table */
-		    for (j = 0; j < 256; j++) {
-			    for (i = 0; i < 256; i++) {
-				    codes[0] = (j << 8) | i;
-				    codes[1] = KEY_RESERVED;
-				    ioctl(fd, EVIOCSKEYCODE, codes);
-			    }
-		    }
-
-		    while (fgets(s,sizeof(s),fin)) {
-			    scancode=strtok(s,"\\n\\t =:");
-			    if (!scancode) {
-				    perror ("parsing input file scancode");
-				    return -1;
-			    }
-			    if (!strcasecmp(scancode, "scancode")) {
-				    scancode = strtok(NULL,"\\n\\t =:");
-				    if (!scancode) {
-					    perror ("parsing input file scancode");
-					    return -1;
-				    }
-			    }
-
-			    keycode=strtok(NULL,"\\n\\t =:(");
-			    if (!keycode) {
-				    perror ("parsing input file keycode");
-				    return -1;
-			    }
-
-			    // printf ("parsing %s=%s:", scancode, keycode);
-			    value=parse_code(keycode);
-			    // printf ("\\tvalue=%d\\n",value);
-
-			    if (value==-1) {
-				    value = strtol(keycode, NULL, 0);
-				    if (errno)
-					    perror("value");
-			    }
-
-			    codes [0] = (unsigned) strtol(scancode, NULL, 0);
-			    codes [1] = (unsigned) value;
-
-			    // printf("\\t%04x=%04x\\n",codes[0], codes[1]);
-			    if(ioctl(fd, EVIOCSKEYCODE, codes)) {
-				    fprintf(stderr, "Setting scancode 0x%04x with 0x%04x via ",codes[0], codes[1]);
-				    perror ("EVIOCSKEYCODE");
-			    }
-
-			    if(ioctl(fd, EVIOCGKEYCODE, codes)==0)
-				    prtcode(codes);
-		    }
-		    return 0;
-	    }
-
-	    /* Get scancode table */
-	    for (j = 0; j < 256; j++) {
-		    for (i = 0; i < 256; i++) {
-			    codes[0] = (j << 8) | i;
-			    if (!ioctl(fd, EVIOCGKEYCODE, codes) && codes[1] != KEY_RESERVED)
-				    prtcode(codes);
-		    }
-	    }
-	    return 0;
-    }
diff --git a/Documentation/media/uapi/rc/lirc-dev-intro.rst b/Documentation/media/uapi/rc/lirc-dev-intro.rst
deleted file mode 100644
index b68c01693939..000000000000
--- a/Documentation/media/uapi/rc/lirc-dev-intro.rst
+++ /dev/null
@@ -1,171 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_dev_intro:
-
-************
-Introduction
-************
-
-LIRC stands for Linux Infrared Remote Control. The LIRC device interface is
-a bi-directional interface for transporting raw IR and decoded scancodes
-data between userspace and kernelspace. Fundamentally, it is just a chardev
-(/dev/lircX, for X = 0, 1, 2, ...), with a number of standard struct
-file_operations defined on it. With respect to transporting raw IR and
-decoded scancodes to and fro, the essential fops are read, write and ioctl.
-
-It is also possible to attach a BPF program to a LIRC device for decoding
-raw IR into scancodes.
-
-Example dmesg output upon a driver registering w/LIRC:
-
-.. code-block:: none
-
-    $ dmesg |grep lirc_dev
-    rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, raw IR transmitter
-
-What you should see for a chardev:
-
-.. code-block:: none
-
-    $ ls -l /dev/lirc*
-    crw-rw---- 1 root root 248, 0 Jul 2 22:20 /dev/lirc0
-
-Note that the package `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_
-contains tools for working with LIRC devices:
-
- - ir-ctl: can receive raw IR and transmit IR, as well as query LIRC
-   device features.
-
- - ir-keytable: can load keymaps; allows you to set IR kernel protocols; load
-   BPF IR decoders and test IR decoding. Some BPF IR decoders are also
-   provided.
-
-.. _lirc_modes:
-
-**********
-LIRC modes
-**********
-
-LIRC supports some modes of receiving and sending IR codes, as shown
-on the following table.
-
-.. _lirc-mode-scancode:
-.. _lirc-scancode-flag-toggle:
-.. _lirc-scancode-flag-repeat:
-
-``LIRC_MODE_SCANCODE``
-
-    This mode is for both sending and receiving IR.
-
-    For transmitting (aka sending), create a ``struct lirc_scancode`` with
-    the desired scancode set in the ``scancode`` member, :c:type:`rc_proto`
-    set to the :ref:`IR protocol <Remote_controllers_Protocols>`, and all other
-    members set to 0. Write this struct to the lirc device.
-
-    For receiving, you read ``struct lirc_scancode`` from the LIRC device.
-    The ``scancode`` field is set to the received scancode and the
-    :ref:`IR protocol <Remote_controllers_Protocols>` is set in
-    :c:type:`rc_proto`. If the scancode maps to a valid key code, this is set
-    in the ``keycode`` field, else it is set to ``KEY_RESERVED``.
-
-    The ``flags`` can have ``LIRC_SCANCODE_FLAG_TOGGLE`` set if the toggle
-    bit is set in protocols that support it (e.g. rc-5 and rc-6), or
-    ``LIRC_SCANCODE_FLAG_REPEAT`` for when a repeat is received for protocols
-    that support it (e.g. nec).
-
-    In the Sanyo and NEC protocol, if you hold a button on remote, rather than
-    repeating the entire scancode, the remote sends a shorter message with
-    no scancode, which just means button is held, a "repeat". When this is
-    received, the ``LIRC_SCANCODE_FLAG_REPEAT`` is set and the scancode and
-    keycode is repeated.
-
-    With nec, there is no way to distinguish "button hold" from "repeatedly
-    pressing the same button". The rc-5 and rc-6 protocols have a toggle bit.
-    When a button is released and pressed again, the toggle bit is inverted.
-    If the toggle bit is set, the ``LIRC_SCANCODE_FLAG_TOGGLE`` is set.
-
-    The ``timestamp`` field is filled with the time nanoseconds
-    (in ``CLOCK_MONOTONIC``) when the scancode was decoded.
-
-.. _lirc-mode-mode2:
-
-``LIRC_MODE_MODE2``
-
-    The driver returns a sequence of pulse and space codes to userspace,
-    as a series of u32 values.
-
-    This mode is used only for IR receive.
-
-    The upper 8 bits determine the packet type, and the lower 24 bits
-    the payload. Use ``LIRC_VALUE()`` macro to get the payload, and
-    the macro ``LIRC_MODE2()`` will give you the type, which
-    is one of:
-
-    ``LIRC_MODE2_PULSE``
-
-        Signifies the presence of IR in microseconds.
-
-    ``LIRC_MODE2_SPACE``
-
-        Signifies absence of IR in microseconds.
-
-    ``LIRC_MODE2_FREQUENCY``
-
-        If measurement of the carrier frequency was enabled with
-        :ref:`lirc_set_measure_carrier_mode` then this packet gives you
-        the carrier frequency in Hertz.
-
-    ``LIRC_MODE2_TIMEOUT``
-
-        If timeout reports are enabled with
-        :ref:`lirc_set_rec_timeout_reports`, when the timeout set with
-        :ref:`lirc_set_rec_timeout` expires due to no IR being detected,
-        this packet will be sent, with the number of microseconds with
-        no IR.
-
-.. _lirc-mode-pulse:
-
-``LIRC_MODE_PULSE``
-
-    In pulse mode, a sequence of pulse/space integer values are written to the
-    lirc device using :ref:`lirc-write`.
-
-    The values are alternating pulse and space lengths, in microseconds. The
-    first and last entry must be a pulse, so there must be an odd number
-    of entries.
-
-    This mode is used only for IR send.
-
-********************
-BPF based IR decoder
-********************
-
-The kernel has support for decoding the most common
-:ref:`IR protocols <Remote_controllers_Protocols>`, but there
-are many protocols which are not supported. To support these, it is possible
-to load an BPF program which does the decoding. This can only be done on
-LIRC devices which support reading raw IR.
-
-First, using the `bpf(2)`_ syscall with the ``BPF_LOAD_PROG`` argument,
-program must be loaded of type ``BPF_PROG_TYPE_LIRC_MODE2``. Once attached
-to the LIRC device, this program will be called for each pulse, space or
-timeout event on the LIRC device. The context for the BPF program is a
-pointer to a unsigned int, which is a :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`
-value. When the program has decoded the scancode, it can be submitted using
-the BPF functions ``bpf_rc_keydown()`` or ``bpf_rc_repeat()``. Mouse or pointer
-movements can be reported using ``bpf_rc_pointer_rel()``.
-
-Once you have the file descriptor for the ``BPF_PROG_TYPE_LIRC_MODE2`` BPF
-program, it can be attached to the LIRC device using the `bpf(2)`_ syscall.
-The target must be the file descriptor for the LIRC device, and the
-attach type must be ``BPF_LIRC_MODE2``. No more than 64 BPF programs can be
-attached to a single LIRC device at a time.
-
-.. _bpf(2): http://man7.org/linux/man-pages/man2/bpf.2.html
diff --git a/Documentation/media/uapi/rc/lirc-dev.rst b/Documentation/media/uapi/rc/lirc-dev.rst
deleted file mode 100644
index 7058e0b2296a..000000000000
--- a/Documentation/media/uapi/rc/lirc-dev.rst
+++ /dev/null
@@ -1,21 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_dev:
-
-LIRC Device Interface
-=====================
-
-
-.. toctree::
-    :maxdepth: 1
-
-    lirc-dev-intro
-    lirc-func
-    lirc-header
diff --git a/Documentation/media/uapi/rc/lirc-func.rst b/Documentation/media/uapi/rc/lirc-func.rst
deleted file mode 100644
index 25058369f724..000000000000
--- a/Documentation/media/uapi/rc/lirc-func.rst
+++ /dev/null
@@ -1,34 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_func:
-
-LIRC Function Reference
-=======================
-
-
-.. toctree::
-    :maxdepth: 1
-
-    lirc-read
-    lirc-write
-    lirc-get-features
-    lirc-get-send-mode
-    lirc-get-rec-mode
-    lirc-get-rec-resolution
-    lirc-set-send-duty-cycle
-    lirc-get-timeout
-    lirc-set-rec-timeout
-    lirc-set-rec-carrier
-    lirc-set-rec-carrier-range
-    lirc-set-send-carrier
-    lirc-set-transmitter-mask
-    lirc-set-rec-timeout-reports
-    lirc-set-measure-carrier-mode
-    lirc-set-wideband-receiver
diff --git a/Documentation/media/uapi/rc/lirc-get-features.rst b/Documentation/media/uapi/rc/lirc-get-features.rst
deleted file mode 100644
index 1d590df8164a..000000000000
--- a/Documentation/media/uapi/rc/lirc-get-features.rst
+++ /dev/null
@@ -1,200 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_get_features:
-
-***********************
-ioctl LIRC_GET_FEATURES
-***********************
-
-Name
-====
-
-LIRC_GET_FEATURES - Get the underlying hardware device's features
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_GET_FEATURES, __u32 *features)
-    :name: LIRC_GET_FEATURES
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``features``
-    Bitmask with the LIRC features.
-
-
-Description
-===========
-
-
-Get the underlying hardware device's features. If a driver does not
-announce support of certain features, calling of the corresponding ioctls
-is undefined.
-
-LIRC features
-=============
-
-.. _LIRC-CAN-REC-RAW:
-
-``LIRC_CAN_REC_RAW``
-
-    Unused. Kept just to avoid breaking uAPI.
-
-.. _LIRC-CAN-REC-PULSE:
-
-``LIRC_CAN_REC_PULSE``
-
-    Unused. Kept just to avoid breaking uAPI.
-    :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` can only be used for transmitting.
-
-.. _LIRC-CAN-REC-MODE2:
-
-``LIRC_CAN_REC_MODE2``
-
-    This is raw IR driver for receiving. This means that
-    :ref:`LIRC_MODE_MODE2 <lirc-mode-MODE2>` is used. This also implies
-    that :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>` is also supported,
-    as long as the kernel is recent enough. Use the
-    :ref:`lirc_set_rec_mode` to switch modes.
-
-.. _LIRC-CAN-REC-LIRCCODE:
-
-``LIRC_CAN_REC_LIRCCODE``
-
-    Unused. Kept just to avoid breaking uAPI.
-
-.. _LIRC-CAN-REC-SCANCODE:
-
-``LIRC_CAN_REC_SCANCODE``
-
-    This is a scancode driver for receiving. This means that
-    :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>` is used.
-
-.. _LIRC-CAN-SET-SEND-CARRIER:
-
-``LIRC_CAN_SET_SEND_CARRIER``
-
-    The driver supports changing the modulation frequency via
-    :ref:`ioctl LIRC_SET_SEND_CARRIER <LIRC_SET_SEND_CARRIER>`.
-
-.. _LIRC-CAN-SET-SEND-DUTY-CYCLE:
-
-``LIRC_CAN_SET_SEND_DUTY_CYCLE``
-
-    The driver supports changing the duty cycle using
-    :ref:`ioctl LIRC_SET_SEND_DUTY_CYCLE <LIRC_SET_SEND_DUTY_CYCLE>`.
-
-.. _LIRC-CAN-SET-TRANSMITTER-MASK:
-
-``LIRC_CAN_SET_TRANSMITTER_MASK``
-
-    The driver supports changing the active transmitter(s) using
-    :ref:`ioctl LIRC_SET_TRANSMITTER_MASK <LIRC_SET_TRANSMITTER_MASK>`.
-
-.. _LIRC-CAN-SET-REC-CARRIER:
-
-``LIRC_CAN_SET_REC_CARRIER``
-
-    The driver supports setting the receive carrier frequency using
-    :ref:`ioctl LIRC_SET_REC_CARRIER <LIRC_SET_REC_CARRIER>`.
-
-.. _LIRC-CAN-SET-REC-DUTY-CYCLE-RANGE:
-
-``LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE``
-
-    Unused. Kept just to avoid breaking uAPI.
-
-.. _LIRC-CAN-SET-REC-CARRIER-RANGE:
-
-``LIRC_CAN_SET_REC_CARRIER_RANGE``
-
-    The driver supports
-    :ref:`ioctl LIRC_SET_REC_CARRIER_RANGE <LIRC_SET_REC_CARRIER_RANGE>`.
-
-.. _LIRC-CAN-GET-REC-RESOLUTION:
-
-``LIRC_CAN_GET_REC_RESOLUTION``
-
-    The driver supports
-    :ref:`ioctl LIRC_GET_REC_RESOLUTION <LIRC_GET_REC_RESOLUTION>`.
-
-.. _LIRC-CAN-SET-REC-TIMEOUT:
-
-``LIRC_CAN_SET_REC_TIMEOUT``
-
-    The driver supports
-    :ref:`ioctl LIRC_SET_REC_TIMEOUT <LIRC_SET_REC_TIMEOUT>`.
-
-.. _LIRC-CAN-SET-REC-FILTER:
-
-``LIRC_CAN_SET_REC_FILTER``
-
-    Unused. Kept just to avoid breaking uAPI.
-
-.. _LIRC-CAN-MEASURE-CARRIER:
-
-``LIRC_CAN_MEASURE_CARRIER``
-
-    The driver supports measuring of the modulation frequency using
-    :ref:`ioctl LIRC_SET_MEASURE_CARRIER_MODE <LIRC_SET_MEASURE_CARRIER_MODE>`.
-
-.. _LIRC-CAN-USE-WIDEBAND-RECEIVER:
-
-``LIRC_CAN_USE_WIDEBAND_RECEIVER``
-
-    The driver supports learning mode using
-    :ref:`ioctl LIRC_SET_WIDEBAND_RECEIVER <LIRC_SET_WIDEBAND_RECEIVER>`.
-
-.. _LIRC-CAN-NOTIFY-DECODE:
-
-``LIRC_CAN_NOTIFY_DECODE``
-
-    Unused. Kept just to avoid breaking uAPI.
-
-.. _LIRC-CAN-SEND-RAW:
-
-``LIRC_CAN_SEND_RAW``
-
-    Unused. Kept just to avoid breaking uAPI.
-
-.. _LIRC-CAN-SEND-PULSE:
-
-``LIRC_CAN_SEND_PULSE``
-
-    The driver supports sending (also called as IR blasting or IR TX) using
-    :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>`. This implies that
-    :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>` is also supported for
-    transmit, as long as the kernel is recent enough. Use the
-    :ref:`lirc_set_send_mode` to switch modes.
-
-.. _LIRC-CAN-SEND-MODE2:
-
-``LIRC_CAN_SEND_MODE2``
-
-    Unused. Kept just to avoid breaking uAPI.
-    :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` can only be used for receiving.
-
-.. _LIRC-CAN-SEND-LIRCCODE:
-
-``LIRC_CAN_SEND_LIRCCODE``
-
-    Unused. Kept just to avoid breaking uAPI.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-get-rec-mode.rst b/Documentation/media/uapi/rc/lirc-get-rec-mode.rst
deleted file mode 100644
index 0a3e02aca80e..000000000000
--- a/Documentation/media/uapi/rc/lirc-get-rec-mode.rst
+++ /dev/null
@@ -1,74 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_get_rec_mode:
-.. _lirc_set_rec_mode:
-
-**********************************************
-ioctls LIRC_GET_REC_MODE and LIRC_SET_REC_MODE
-**********************************************
-
-Name
-====
-
-LIRC_GET_REC_MODE/LIRC_SET_REC_MODE - Get/set current receive mode.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_GET_REC_MODE, __u32 *mode)
-	:name: LIRC_GET_REC_MODE
-
-.. c:function:: int ioctl( int fd, LIRC_SET_REC_MODE, __u32 *mode)
-	:name: LIRC_SET_REC_MODE
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``mode``
-    Mode used for receive.
-
-Description
-===========
-
-Get and set the current receive mode. Only
-:ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` and
-:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported.
-Use :ref:`lirc_get_features` to find out which modes the driver supports.
-
-Return Value
-============
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``ENODEV``
-
-       -  Device not available.
-
-    -  .. row 2
-
-       -  ``ENOTTY``
-
-       -  Device does not support receiving.
-
-    -  .. row 3
-
-       -  ``EINVAL``
-
-       -  Invalid mode or invalid mode for this device.
diff --git a/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst b/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst
deleted file mode 100644
index f560b694ccf2..000000000000
--- a/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_get_rec_resolution:
-
-*****************************
-ioctl LIRC_GET_REC_RESOLUTION
-*****************************
-
-Name
-====
-
-LIRC_GET_REC_RESOLUTION - Obtain the value of receive resolution, in microseconds.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_GET_REC_RESOLUTION, __u32 *microseconds)
-    :name: LIRC_GET_REC_RESOLUTION
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``microseconds``
-    Resolution, in microseconds.
-
-
-Description
-===========
-
-Some receivers have maximum resolution which is defined by internal
-sample rate or data format limitations. E.g. it's common that
-signals can only be reported in 50 microsecond steps.
-
-This ioctl returns the integer value with such resolution, with can be
-used by userspace applications like lircd to automatically adjust the
-tolerance value.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-get-send-mode.rst b/Documentation/media/uapi/rc/lirc-get-send-mode.rst
deleted file mode 100644
index 4f440c697052..000000000000
--- a/Documentation/media/uapi/rc/lirc-get-send-mode.rst
+++ /dev/null
@@ -1,78 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_get_send_mode:
-.. _lirc_set_send_mode:
-
-************************************************
-ioctls LIRC_GET_SEND_MODE and LIRC_SET_SEND_MODE
-************************************************
-
-Name
-====
-
-LIRC_GET_SEND_MODE/LIRC_SET_SEND_MODE - Get/set current transmit mode.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_GET_SEND_MODE, __u32 *mode )
-    :name: LIRC_GET_SEND_MODE
-
-.. c:function:: int ioctl( int fd, LIRC_SET_SEND_MODE, __u32 *mode )
-    :name: LIRC_SET_SEND_MODE
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``mode``
-    The mode used for transmitting.
-
-
-Description
-===========
-
-Get/set current transmit mode.
-
-Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` and
-:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported by for IR send,
-depending on the driver. Use :ref:`lirc_get_features` to find out which
-modes the driver supports.
-
-Return Value
-============
-
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``ENODEV``
-
-       -  Device not available.
-
-    -  .. row 2
-
-       -  ``ENOTTY``
-
-       -  Device does not support transmitting.
-
-    -  .. row 3
-
-       -  ``EINVAL``
-
-       -  Invalid mode or invalid mode for this device.
diff --git a/Documentation/media/uapi/rc/lirc-get-timeout.rst b/Documentation/media/uapi/rc/lirc-get-timeout.rst
deleted file mode 100644
index 1de214529f27..000000000000
--- a/Documentation/media/uapi/rc/lirc-get-timeout.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_get_min_timeout:
-.. _lirc_get_max_timeout:
-
-****************************************************
-ioctls LIRC_GET_MIN_TIMEOUT and LIRC_GET_MAX_TIMEOUT
-****************************************************
-
-Name
-====
-
-LIRC_GET_MIN_TIMEOUT / LIRC_GET_MAX_TIMEOUT - Obtain the possible timeout
-range for IR receive.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_GET_MIN_TIMEOUT, __u32 *timeout)
-    :name: LIRC_GET_MIN_TIMEOUT
-
-.. c:function:: int ioctl( int fd, LIRC_GET_MAX_TIMEOUT, __u32 *timeout)
-    :name: LIRC_GET_MAX_TIMEOUT
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``timeout``
-    Timeout, in microseconds.
-
-
-Description
-===========
-
-Some devices have internal timers that can be used to detect when
-there's no IR activity for a long time. This can help lircd in
-detecting that a IR signal is finished and can speed up the decoding
-process. Returns an integer value with the minimum/maximum timeout
-that can be set.
-
-.. note::
-
-   Some devices have a fixed timeout, in that case
-   both ioctls will return the same value even though the timeout
-   cannot be changed via :ref:`LIRC_SET_REC_TIMEOUT`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-header.rst b/Documentation/media/uapi/rc/lirc-header.rst
deleted file mode 100644
index c9b4f33e1031..000000000000
--- a/Documentation/media/uapi/rc/lirc-header.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_header:
-
-****************
-LIRC Header File
-****************
-
-.. kernel-include:: $BUILDDIR/lirc.h.rst
-
diff --git a/Documentation/media/uapi/rc/lirc-read.rst b/Documentation/media/uapi/rc/lirc-read.rst
deleted file mode 100644
index 256e520bc27e..000000000000
--- a/Documentation/media/uapi/rc/lirc-read.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc-read:
-
-***********
-LIRC read()
-***********
-
-Name
-====
-
-lirc-read - Read from a LIRC device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-
-
-.. c:function:: ssize_t read( int fd, void *buf, size_t count )
-    :name: lirc-read
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by ``open()``.
-
-``buf``
-   Buffer to be filled
-
-``count``
-   Max number of bytes to read
-
-Description
-===========
-
-:ref:`read() <lirc-read>` attempts to read up to ``count`` bytes from file
-descriptor ``fd`` into the buffer starting at ``buf``.  If ``count`` is zero,
-:ref:`read() <lirc-read>` returns zero and has no other results. If ``count``
-is greater than ``SSIZE_MAX``, the result is unspecified.
-
-The exact format of the data depends on what :ref:`lirc_modes` a driver
-uses. Use :ref:`lirc_get_features` to get the supported mode, and use
-:ref:`lirc_set_rec_mode` set the current active mode.
-
-The mode :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` is for raw IR,
-in which packets containing an unsigned int value describing an IR signal are
-read from the chardev.
-
-Alternatively, :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` can be available,
-in this mode scancodes which are either decoded by software decoders, or
-by hardware decoders. The :c:type:`rc_proto` member is set to the
-:ref:`IR protocol <Remote_controllers_Protocols>`
-used for transmission, and ``scancode`` to the decoded scancode,
-and the ``keycode`` set to the keycode or ``KEY_RESERVED``.
-
-
-Return Value
-============
-
-On success, the number of bytes read is returned. It is not an error if
-this number is smaller than the number of bytes requested, or the amount
-of data required for one frame.  On error, -1 is returned, and the ``errno``
-variable is set appropriately.
diff --git a/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst b/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst
deleted file mode 100644
index c80acd85e369..000000000000
--- a/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst
+++ /dev/null
@@ -1,53 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_set_measure_carrier_mode:
-
-***********************************
-ioctl LIRC_SET_MEASURE_CARRIER_MODE
-***********************************
-
-Name
-====
-
-LIRC_SET_MEASURE_CARRIER_MODE - enable or disable measure mode
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_SET_MEASURE_CARRIER_MODE, __u32 *enable )
-    :name: LIRC_SET_MEASURE_CARRIER_MODE
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``enable``
-    enable = 1 means enable measure mode, enable = 0 means disable measure
-    mode.
-
-
-Description
-===========
-
-.. _lirc-mode2-frequency:
-
-Enable or disable measure mode. If enabled, from the next key
-press on, the driver will send ``LIRC_MODE2_FREQUENCY`` packets. By
-default this should be turned off.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst b/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst
deleted file mode 100644
index 443681d5cc10..000000000000
--- a/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_set_rec_carrier_range:
-
-********************************
-ioctl LIRC_SET_REC_CARRIER_RANGE
-********************************
-
-Name
-====
-
-LIRC_SET_REC_CARRIER_RANGE - Set lower bound of the carrier used to modulate
-IR receive.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_SET_REC_CARRIER_RANGE, __u32 *frequency )
-    :name: LIRC_SET_REC_CARRIER_RANGE
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``frequency``
-    Frequency of the carrier that modulates PWM data, in Hz.
-
-Description
-===========
-
-This ioctl sets the upper range of carrier frequency that will be recognized
-by the IR receiver.
-
-.. note::
-
-   To set a range use :ref:`LIRC_SET_REC_CARRIER_RANGE
-   <LIRC_SET_REC_CARRIER_RANGE>` with the lower bound first and later call
-   :ref:`LIRC_SET_REC_CARRIER <LIRC_SET_REC_CARRIER>` with the upper bound.
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst b/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst
deleted file mode 100644
index cbe1e48b2a4a..000000000000
--- a/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst
+++ /dev/null
@@ -1,53 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_set_rec_carrier:
-
-**************************
-ioctl LIRC_SET_REC_CARRIER
-**************************
-
-Name
-====
-
-LIRC_SET_REC_CARRIER - Set carrier used to modulate IR receive.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_SET_REC_CARRIER, __u32 *frequency )
-    :name: LIRC_SET_REC_CARRIER
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``frequency``
-    Frequency of the carrier that modulates PWM data, in Hz.
-
-Description
-===========
-
-Set receive carrier used to modulate IR PWM pulses and spaces.
-
-.. note::
-
-   If called together with :ref:`LIRC_SET_REC_CARRIER_RANGE`, this ioctl
-   sets the upper bound frequency that will be recognized by the device.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst b/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst
deleted file mode 100644
index d06d69414c1e..000000000000
--- a/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_set_rec_timeout_reports:
-
-**********************************
-ioctl LIRC_SET_REC_TIMEOUT_REPORTS
-**********************************
-
-Name
-====
-
-LIRC_SET_REC_TIMEOUT_REPORTS - enable or disable timeout reports for IR receive
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_SET_REC_TIMEOUT_REPORTS, __u32 *enable )
-    :name: LIRC_SET_REC_TIMEOUT_REPORTS
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``enable``
-    enable = 1 means enable timeout report, enable = 0 means disable timeout
-    reports.
-
-
-Description
-===========
-
-.. _lirc-mode2-timeout:
-
-Enable or disable timeout reports for IR receive. By default, timeout reports
-should be turned off.
-
-.. note::
-
-   This ioctl is only valid for :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst b/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst
deleted file mode 100644
index 163ac6065737..000000000000
--- a/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst
+++ /dev/null
@@ -1,61 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_set_rec_timeout:
-.. _lirc_get_rec_timeout:
-
-***************************************************
-ioctl LIRC_GET_REC_TIMEOUT and LIRC_SET_REC_TIMEOUT
-***************************************************
-
-Name
-====
-
-LIRC_GET_REC_TIMEOUT/LIRC_SET_REC_TIMEOUT - Get/set the integer value for IR inactivity timeout.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_GET_REC_TIMEOUT, __u32 *timeout )
-    :name: LIRC_GET_REC_TIMEOUT
-
-.. c:function:: int ioctl( int fd, LIRC_SET_REC_TIMEOUT, __u32 *timeout )
-    :name: LIRC_SET_REC_TIMEOUT
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``timeout``
-    Timeout, in microseconds.
-
-
-Description
-===========
-
-Get and set the integer value for IR inactivity timeout.
-
-If supported by the hardware, setting it to 0  disables all hardware timeouts
-and data should be reported as soon as possible. If the exact value
-cannot be set, then the next possible value _greater_ than the
-given value should be set.
-
-.. note::
-
-   The range of supported timeout is given by :ref:`LIRC_GET_MIN_TIMEOUT`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-set-send-carrier.rst b/Documentation/media/uapi/rc/lirc-set-send-carrier.rst
deleted file mode 100644
index cffc6c1e15cc..000000000000
--- a/Documentation/media/uapi/rc/lirc-set-send-carrier.rst
+++ /dev/null
@@ -1,48 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_set_send_carrier:
-
-***************************
-ioctl LIRC_SET_SEND_CARRIER
-***************************
-
-Name
-====
-
-LIRC_SET_SEND_CARRIER - Set send carrier used to modulate IR TX.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_SET_SEND_CARRIER, __u32 *frequency )
-    :name: LIRC_SET_SEND_CARRIER
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``frequency``
-    Frequency of the carrier to be modulated, in Hz.
-
-Description
-===========
-
-Set send carrier used to modulate IR PWM pulses and spaces.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst b/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst
deleted file mode 100644
index 08ab3d1a96cd..000000000000
--- a/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_set_send_duty_cycle:
-
-******************************
-ioctl LIRC_SET_SEND_DUTY_CYCLE
-******************************
-
-Name
-====
-
-LIRC_SET_SEND_DUTY_CYCLE - Set the duty cycle of the carrier signal for
-IR transmit.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_SET_SEND_DUTY_CYCLE, __u32 *duty_cycle)
-    :name: LIRC_SET_SEND_DUTY_CYCLE
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``duty_cycle``
-    Duty cicle, describing the pulse width in percent (from 1 to 99) of
-    the total cycle. Values 0 and 100 are reserved.
-
-
-Description
-===========
-
-Get/set the duty cycle of the carrier signal for IR transmit.
-
-Currently, no special meaning is defined for 0 or 100, but this
-could be used to switch off carrier generation in the future, so
-these values should be reserved.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst b/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst
deleted file mode 100644
index 889a739eaf0d..000000000000
--- a/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst
+++ /dev/null
@@ -1,58 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_set_transmitter_mask:
-
-*******************************
-ioctl LIRC_SET_TRANSMITTER_MASK
-*******************************
-
-Name
-====
-
-LIRC_SET_TRANSMITTER_MASK - Enables send codes on a given set of transmitters
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_SET_TRANSMITTER_MASK, __u32 *mask )
-    :name: LIRC_SET_TRANSMITTER_MASK
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``mask``
-    Mask with channels to enable tx. Channel 0 is the least significant bit.
-
-
-Description
-===========
-
-Some IR TX devices have multiple output channels, in such case,
-:ref:`LIRC_CAN_SET_TRANSMITTER_MASK <LIRC-CAN-SET-TRANSMITTER-MASK>` is
-returned via :ref:`LIRC_GET_FEATURES` and this ioctl sets what channels will
-send IR codes.
-
-This ioctl enables the given set of transmitters. The first transmitter is
-encoded by the least significant bit and so on.
-
-When an invalid bit mask is given, i.e. a bit is set, even though the device
-does not have so many transitters, then this ioctl returns the number of
-available transitters and does nothing otherwise.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst b/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst
deleted file mode 100644
index 592715452fce..000000000000
--- a/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc_set_wideband_receiver:
-
-********************************
-ioctl LIRC_SET_WIDEBAND_RECEIVER
-********************************
-
-Name
-====
-
-LIRC_SET_WIDEBAND_RECEIVER - enable wide band receiver.
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, LIRC_SET_WIDEBAND_RECEIVER, __u32 *enable )
-    :name: LIRC_SET_WIDEBAND_RECEIVER
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by open().
-
-``enable``
-    enable = 1 means enable wideband receiver, enable = 0 means disable
-    wideband receiver.
-
-
-Description
-===========
-
-Some receivers are equipped with special wide band receiver which is
-intended to be used to learn output of existing remote. This ioctl
-allows enabling or disabling it.
-
-This might be useful of receivers that have otherwise narrow band receiver
-that prevents them to be used with some remotes. Wide band receiver might
-also be more precise. On the other hand its disadvantage it usually
-reduced range of reception.
-
-.. note::
-
-    Wide band receiver might be implictly enabled if you enable
-    carrier reports. In that case it will be disabled as soon as you disable
-    carrier reports. Trying to disable wide band receiver while carrier
-    reports are active will do nothing.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc-write.rst b/Documentation/media/uapi/rc/lirc-write.rst
deleted file mode 100644
index eafe13203ea3..000000000000
--- a/Documentation/media/uapi/rc/lirc-write.rst
+++ /dev/null
@@ -1,82 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _lirc-write:
-
-************
-LIRC write()
-************
-
-Name
-====
-
-lirc-write - Write to a LIRC device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-
-
-.. c:function:: ssize_t write( int fd, void *buf, size_t count )
-    :name: lirc-write
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by ``open()``.
-
-``buf``
-    Buffer with data to be written
-
-``count``
-    Number of bytes at the buffer
-
-Description
-===========
-
-:ref:`write() <lirc-write>` writes up to ``count`` bytes to the device
-referenced by the file descriptor ``fd`` from the buffer starting at
-``buf``.
-
-The exact format of the data depends on what mode a driver is in, use
-:ref:`lirc_get_features` to get the supported modes and use
-:ref:`lirc_set_send_mode` set the mode.
-
-When in :ref:`LIRC_MODE_PULSE <lirc-mode-PULSE>` mode, the data written to
-the chardev is a pulse/space sequence of integer values. Pulses and spaces
-are only marked implicitly by their position. The data must start and end
-with a pulse, therefore, the data must always include an uneven number of
-samples. The write function blocks until the data has been transmitted
-by the hardware. If more data is provided than the hardware can send, the
-driver returns ``EINVAL``.
-
-When in :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` mode, one
-``struct lirc_scancode`` must be written to the chardev at a time, else
-``EINVAL`` is returned. Set the desired scancode in the ``scancode`` member,
-and the :ref:`IR protocol <Remote_controllers_Protocols>` in the
-:c:type:`rc_proto`: member. All other members must be
-set to 0, else ``EINVAL`` is returned. If there is no protocol encoder
-for the protocol or the scancode is not valid for the specified protocol,
-``EINVAL`` is returned. The write function blocks until the scancode
-is transmitted by the hardware.
-
-
-Return Value
-============
-
-On success, the number of bytes written is returned. It is not an error if
-this number is smaller than the number of bytes requested, or the amount
-of data required for one frame.  On error, -1 is returned, and the ``errno``
-variable is set appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/rc-intro.rst b/Documentation/media/uapi/rc/rc-intro.rst
deleted file mode 100644
index 37c5f90c76e7..000000000000
--- a/Documentation/media/uapi/rc/rc-intro.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _Remote_controllers_Intro:
-
-************
-Introduction
-************
-
-Currently, most analog and digital devices have a Infrared input for
-remote controllers. Each manufacturer has their own type of control. It
-is not rare for the same manufacturer to ship different types of
-controls, depending on the device.
-
-A Remote Controller interface is mapped as a normal evdev/input
-interface, just like a keyboard or a mouse. So, it uses all ioctls
-already defined for any other input devices.
-
-However, remove controllers are more flexible than a normal input
-device, as the IR receiver (and/or transmitter) can be used in
-conjunction with a wide variety of different IR remotes.
-
-In order to allow flexibility, the Remote Controller subsystem allows
-controlling the RC-specific attributes via
-:ref:`the sysfs class nodes <remote_controllers_sysfs_nodes>`.
diff --git a/Documentation/media/uapi/rc/rc-protos.rst b/Documentation/media/uapi/rc/rc-protos.rst
deleted file mode 100644
index b250ebe301d5..000000000000
--- a/Documentation/media/uapi/rc/rc-protos.rst
+++ /dev/null
@@ -1,456 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _Remote_controllers_Protocols:
-
-*****************************************
-Remote Controller Protocols and Scancodes
-*****************************************
-
-IR is encoded as a series of pulses and spaces, using a protocol. These
-protocols can encode e.g. an address (which device should respond) and a
-command: what it should do. The values for these are not always consistent
-across different devices for a given protocol.
-
-Therefore out the output of the IR decoder is a scancode; a single u32
-value. Using keymap tables this can be mapped to linux key codes.
-
-Other things can be encoded too. Some IR protocols encode a toggle bit; this
-is to distinguish whether the same button is being held down, or has been
-released and pressed again. If has been released and pressed again, the
-toggle bit will invert from one IR message to the next.
-
-Some remotes have a pointer-type device which can used to control the
-mouse; some air conditioning systems can have their target temperature
-target set in IR.
-
-The following are the protocols the kernel knows about and also lists
-how scancodes are encoded for each protocol.
-
-rc-5 (RC_PROTO_RC5)
--------------------
-
-This IR protocol uses manchester encoding to encode 14 bits. There is a
-detailed description here https://www.sbprojects.net/knowledge/ir/rc5.php.
-
-The scancode encoding is *not* consistent with the lirc daemon (lircd) rc5
-protocol, or the manchester BPF decoder.
-
-.. flat-table:: rc5 bits scancode mapping
-   :widths:       1 1 2
-
-   * - rc-5 bit
-
-     - scancode bit
-
-     - description
-
-   * - 1
-
-     - none
-
-     - Start bit, always set
-
-   * - 1
-
-     - 6 (inverted)
-
-     - 2nd start bit in rc5,  re-used as 6th command bit
-
-   * - 1
-
-     - none
-
-     - Toggle bit
-
-   * - 5
-
-     - 8 to 13
-
-     - Address
-
-   * - 6
-
-     - 0 to 5
-
-     - Command
-
-There is a variant of rc5 called either rc5x or extended rc5
-where there the second stop bit is the 6th commmand bit, but inverted.
-This is done so it the scancodes and encoding is compatible with existing
-schemes. This bit is stored in bit 6 of the scancode, inverted. This is
-done to keep it compatible with plain rc-5 where there are two start bits.
-
-rc-5-sz (RC_PROTO_RC5_SZ)
--------------------------
-This is much like rc-5 but one bit longer. The scancode is encoded
-differently.
-
-.. flat-table:: rc-5-sz bits scancode mapping
-   :widths:       1 1 2
-
-   * - rc-5-sz bits
-
-     - scancode bit
-
-     - description
-
-   * - 1
-
-     - none
-
-     - Start bit, always set
-
-   * - 1
-
-     - 13
-
-     - Address bit
-
-   * - 1
-
-     - none
-
-     - Toggle bit
-
-   * - 6
-
-     - 6 to 11
-
-     - Address
-
-   * - 6
-
-     - 0 to 5
-
-     - Command
-
-rc-5x-20 (RC_PROTO_RC5X_20)
----------------------------
-
-This rc-5 extended to encoded 20 bits. The is a 3555 microseconds space
-after the 8th bit.
-
-.. flat-table:: rc-5x-20 bits scancode mapping
-   :widths:       1 1 2
-
-   * - rc-5-sz bits
-
-     - scancode bit
-
-     - description
-
-   * - 1
-
-     - none
-
-     - Start bit, always set
-
-   * - 1
-
-     - 14
-
-     - Address bit
-
-   * - 1
-
-     - none
-
-     - Toggle bit
-
-   * - 5
-
-     - 16 to 20
-
-     - Address
-
-   * - 6
-
-     - 8 to 13
-
-     - Address
-
-   * - 6
-
-     - 0 to 5
-
-     - Command
-
-
-jvc (RC_PROTO_JVC)
-------------------
-
-The jvc protocol is much like nec, without the inverted values. It is
-described here https://www.sbprojects.net/knowledge/ir/jvc.php.
-
-The scancode is a 16 bits value, where the address is the lower 8 bits
-and the command the higher 8 bits; this is reversed from IR order.
-
-sony-12 (RC_PROTO_SONY12)
--------------------------
-
-The sony protocol is a pulse-width encoding. There are three variants,
-which just differ in number of bits and scancode encoding.
-
-.. flat-table:: sony-12 bits scancode mapping
-   :widths:       1 1 2
-
-   * - sony-12 bits
-
-     - scancode bit
-
-     - description
-
-   * - 5
-
-     - 16 to 20
-
-     - device
-
-   * - 7
-
-     - 0 to 6
-
-     - function
-
-sony-15 (RC_PROTO_SONY15)
--------------------------
-
-The sony protocol is a pulse-width encoding. There are three variants,
-which just differ in number of bits and scancode encoding.
-
-.. flat-table:: sony-12 bits scancode mapping
-   :widths:       1 1 2
-
-   * - sony-12 bits
-
-     - scancode bit
-
-     - description
-
-   * - 8
-
-     - 16 to 23
-
-     - device
-
-   * - 7
-
-     - 0 to 6
-
-     - function
-
-sony-20 (RC_PROTO_SONY20)
--------------------------
-
-The sony protocol is a pulse-width encoding. There are three variants,
-which just differ in number of bits and scancode encoding.
-
-.. flat-table:: sony-20 bits scancode mapping
-   :widths:       1 1 2
-
-   * - sony-20 bits
-
-     - scancode bit
-
-     - description
-
-   * - 5
-
-     - 16 to 20
-
-     - device
-
-   * - 7
-
-     - 0 to 7
-
-     - device
-
-   * - 8
-
-     - 8 to 15
-
-     - extended bits
-
-nec (RC_PROTO_NEC)
-------------------
-
-The nec protocol encodes an 8 bit address and an 8 bit command. It is
-described here https://www.sbprojects.net/knowledge/ir/nec.php. Note
-that the protocol sends least significant bit first.
-
-As a check, the nec protocol sends the address and command twice; the
-second time it is inverted. This is done for verification.
-
-A plain nec IR message has 16 bits; the high 8 bits are the address
-and the low 8 bits are the command.
-
-nec-x (RC_PROTO_NECX)
----------------------
-
-Extended nec has a 16 bit address and a 8 bit command. This is encoded
-as a 24 bit value as you would expect, with the lower 8 bits the command
-and the upper 16 bits the address.
-
-nec-32 (RC_PROTO_NEC32)
------------------------
-
-nec-32 does not send an inverted address or an inverted command; the
-entire message, all 32 bits, are used.
-
-For this to be decoded correctly, the second 8 bits must not be the
-inverted value of the first, and also the last 8 bits must not be the
-inverted value of the third 8 bit value.
-
-The scancode has a somewhat unusual encoding.
-
-.. flat-table:: nec-32 bits scancode mapping
-
-   * - nec-32 bits
-
-     - scancode bit
-
-   * - First 8 bits
-
-     - 16 to 23
-
-   * - Second 8 bits
-
-     - 24 to 31
-
-   * - Third 8 bits
-
-     - 0 to 7
-
-   * - Fourth 8 bits
-
-     - 8 to 15
-
-sanyo (RC_PROTO_SANYO)
-----------------------
-
-The sanyo protocol is like the nec protocol, but with 13 bits address
-rather than 8 bits. Both the address and the command are followed by
-their inverted versions, but these are not present in the scancodes.
-
-Bis 8 to 20 of the scancode is the 13 bits address, and the lower 8
-bits are the command.
-
-mcir2-kbd (RC_PROTO_MCIR2_KBD)
-------------------------------
-
-This protocol is generated by the Microsoft MCE keyboard for keyboard
-events. Refer to the ir-mce_kbd-decoder.c to see how it is encoded.
-
-mcir2-mse (RC_PROTO_MCIR2_MSE)
-------------------------------
-
-This protocol is generated by the Microsoft MCE keyboard for pointer
-events. Refer to the ir-mce_kbd-decoder.c to see how it is encoded.
-
-rc-6-0 (RC_PROTO_RC6_0)
------------------------
-
-This is the rc-6 in mode 0. rc-6 is described here
-https://www.sbprojects.net/knowledge/ir/rc6.php.
-The scancode is the exact 16 bits as in the protocol. There is also a
-toggle bit.
-
-rc-6-6a-20 (RC_PROTO_RC6_6A_20)
--------------------------------
-
-This is the rc-6 in mode 6a, 20 bits. rc-6 is described here
-https://www.sbprojects.net/knowledge/ir/rc6.php.
-The scancode is the exact 20 bits
-as in the protocol. There is also a toggle bit.
-
-rc-6-6a-24 (RC_PROTO_RC6_6A_24)
--------------------------------
-
-This is the rc-6 in mode 6a, 24 bits. rc-6 is described here
-https://www.sbprojects.net/knowledge/ir/rc6.php.
-The scancode is the exact 24 bits
-as in the protocol. There is also a toggle bit.
-
-rc-6-6a-32 (RC_PROTO_RC6_6A_32)
--------------------------------
-
-This is the rc-6 in mode 6a, 32 bits. rc-6 is described here
-https://www.sbprojects.net/knowledge/ir/rc6.php.
-The upper 16 bits are the vendor,
-and the lower 16 bits are the vendor-specific bits. This protocol is
-for the non-Microsoft MCE variant (vendor != 0x800f).
-
-
-rc-6-mce (RC_PROTO_RC6_MCE)
----------------------------
-
-This is the rc-6 in mode 6a, 32 bits. The upper 16 bits are the vendor,
-and the lower 16 bits are the vendor-specific bits. This protocol is
-for the Microsoft MCE variant (vendor = 0x800f). The toggle bit in the
-protocol itself is ignored, and the 16th bit should be takes as the toggle
-bit.
-
-sharp (RC_PROTO_SHARP)
-----------------------
-
-This is a protocol used by Sharp VCRs, is described here
-https://www.sbprojects.net/knowledge/ir/sharp.php. There is a very long
-(40ms) space between the normal and inverted values, and some IR receivers
-cannot decode this.
-
-There is a 5 bit address and a 8 bit command. In the scancode the address is
-in bits 8 to 12, and the command in bits 0 to 7.
-
-xmp (RC_PROTO_XMP)
-------------------
-
-This protocol has several versions and only version 1 is supported. Refer
-to the decoder (ir-xmp-decoder.c) to see how it is encoded.
-
-
-cec (RC_PROTO_CEC)
-------------------
-
-This is not an IR protocol, this is a protocol over CEC. The CEC
-infrastructure uses rc-core for handling CEC commands, so that they
-can easily be remapped.
-
-imon (RC_PROTO_IMON)
---------------------
-
-This protocol is used by Antec Veris/SoundGraph iMON remotes.
-
-The protocol
-describes both button presses and pointer movements. The protocol encodes
-31 bits, and the scancode is simply the 31 bits with the top bit always 0.
-
-rc-mm-12 (RC_PROTO_RCMM12)
---------------------------
-
-The rc-mm protocol is described here
-https://www.sbprojects.net/knowledge/ir/rcmm.php. The scancode is simply
-the 12 bits.
-
-rc-mm-24 (RC_PROTO_RCMM24)
---------------------------
-
-The rc-mm protocol is described here
-https://www.sbprojects.net/knowledge/ir/rcmm.php. The scancode is simply
-the 24 bits.
-
-rc-mm-32 (RC_PROTO_RCMM32)
---------------------------
-
-The rc-mm protocol is described here
-https://www.sbprojects.net/knowledge/ir/rcmm.php. The scancode is simply
-the 32 bits.
-
-xbox-dvd (RC_PROTO_XBOX_DVD)
-----------------------------
-
-This protocol is used by XBox DVD Remote, which was made for the original
-XBox. There is no in-kernel decoder or encoder for this protocol. The usb
-device decodes the protocol. There is a BPF decoder available in v4l-utils.
diff --git a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst
deleted file mode 100644
index b8e8319e3317..000000000000
--- a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst
+++ /dev/null
@@ -1,151 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _remote_controllers_sysfs_nodes:
-
-*******************************
-Remote Controller's sysfs nodes
-*******************************
-
-As defined at ``Documentation/ABI/testing/sysfs-class-rc``, those are
-the sysfs nodes that control the Remote Controllers:
-
-
-.. _sys_class_rc:
-
-/sys/class/rc/
-==============
-
-The ``/sys/class/rc/`` class sub-directory belongs to the Remote
-Controller core and provides a sysfs interface for configuring infrared
-remote controller receivers.
-
-
-.. _sys_class_rc_rcN:
-
-/sys/class/rc/rcN/
-==================
-
-A ``/sys/class/rc/rcN`` directory is created for each remote control
-receiver device where N is the number of the receiver.
-
-
-.. _sys_class_rc_rcN_protocols:
-
-/sys/class/rc/rcN/protocols
-===========================
-
-Reading this file returns a list of available protocols, something like::
-
-	rc5 [rc6] nec jvc [sony]
-
-Enabled protocols are shown in [] brackets.
-
-Writing "+proto" will add a protocol to the list of enabled protocols.
-
-Writing "-proto" will remove a protocol from the list of enabled
-protocols.
-
-Writing "proto" will enable only "proto".
-
-Writing "none" will disable all protocols.
-
-Write fails with ``EINVAL`` if an invalid protocol combination or unknown
-protocol name is used.
-
-
-.. _sys_class_rc_rcN_filter:
-
-/sys/class/rc/rcN/filter
-========================
-
-Sets the scancode filter expected value.
-
-Use in combination with ``/sys/class/rc/rcN/filter_mask`` to set the
-expected value of the bits set in the filter mask. If the hardware
-supports it then scancodes which do not match the filter will be
-ignored. Otherwise the write will fail with an error.
-
-This value may be reset to 0 if the current protocol is altered.
-
-
-.. _sys_class_rc_rcN_filter_mask:
-
-/sys/class/rc/rcN/filter_mask
-=============================
-
-Sets the scancode filter mask of bits to compare. Use in combination
-with ``/sys/class/rc/rcN/filter`` to set the bits of the scancode which
-should be compared against the expected value. A value of 0 disables the
-filter to allow all valid scancodes to be processed.
-
-If the hardware supports it then scancodes which do not match the filter
-will be ignored. Otherwise the write will fail with an error.
-
-This value may be reset to 0 if the current protocol is altered.
-
-
-.. _sys_class_rc_rcN_wakeup_protocols:
-
-/sys/class/rc/rcN/wakeup_protocols
-==================================
-
-Reading this file returns a list of available protocols to use for the
-wakeup filter, something like::
-
-	rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce
-
-Note that protocol variants are listed, so ``nec``, ``sony``, ``rc-5``, ``rc-6``
-have their different bit length encodings listed if available.
-
-Note that all protocol variants are listed.
-
-The enabled wakeup protocol is shown in [] brackets.
-
-Only one protocol can be selected at a time.
-
-Writing "proto" will use "proto" for wakeup events.
-
-Writing "none" will disable wakeup.
-
-Write fails with ``EINVAL`` if an invalid protocol combination or unknown
-protocol name is used, or if wakeup is not supported by the hardware.
-
-
-.. _sys_class_rc_rcN_wakeup_filter:
-
-/sys/class/rc/rcN/wakeup_filter
-===============================
-
-Sets the scancode wakeup filter expected value. Use in combination with
-``/sys/class/rc/rcN/wakeup_filter_mask`` to set the expected value of
-the bits set in the wakeup filter mask to trigger a system wake event.
-
-If the hardware supports it and wakeup_filter_mask is not 0 then
-scancodes which match the filter will wake the system from e.g. suspend
-to RAM or power off. Otherwise the write will fail with an error.
-
-This value may be reset to 0 if the wakeup protocol is altered.
-
-
-.. _sys_class_rc_rcN_wakeup_filter_mask:
-
-/sys/class/rc/rcN/wakeup_filter_mask
-====================================
-
-Sets the scancode wakeup filter mask of bits to compare. Use in
-combination with ``/sys/class/rc/rcN/wakeup_filter`` to set the bits of
-the scancode which should be compared against the expected value to
-trigger a system wake event.
-
-If the hardware supports it and wakeup_filter_mask is not 0 then
-scancodes which match the filter will wake the system from e.g. suspend
-to RAM or power off. Otherwise the write will fail with an error.
-
-This value may be reset to 0 if the wakeup protocol is altered.
diff --git a/Documentation/media/uapi/rc/rc-table-change.rst b/Documentation/media/uapi/rc/rc-table-change.rst
deleted file mode 100644
index 4a2e601b89fb..000000000000
--- a/Documentation/media/uapi/rc/rc-table-change.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _Remote_controllers_table_change:
-
-*******************************************
-Changing default Remote Controller mappings
-*******************************************
-
-The event interface provides two ioctls to be used against the
-/dev/input/event device, to allow changing the default keymapping.
-
-This program demonstrates how to replace the keymap tables.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    keytable.c
diff --git a/Documentation/media/uapi/rc/rc-tables.rst b/Documentation/media/uapi/rc/rc-tables.rst
deleted file mode 100644
index 20d7c686922b..000000000000
--- a/Documentation/media/uapi/rc/rc-tables.rst
+++ /dev/null
@@ -1,766 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _Remote_controllers_tables:
-
-************************
-Remote controller tables
-************************
-
-Unfortunately, for several years, there was no effort to create uniform
-IR keycodes for different devices. This caused the same IR keyname to be
-mapped completely differently on different IR devices. This resulted
-that the same IR keyname to be mapped completely different on different
-IR's. Due to that, V4L2 API now specifies a standard for mapping Media
-keys on IR.
-
-This standard should be used by both V4L/DVB drivers and userspace
-applications
-
-The modules register the remote as keyboard within the linux input
-layer. This means that the IR key strokes will look like normal keyboard
-key strokes (if CONFIG_INPUT_KEYBOARD is enabled). Using the event
-devices (CONFIG_INPUT_EVDEV) it is possible for applications to access
-the remote via /dev/input/event devices.
-
-
-.. _rc_standard_keymap:
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: IR default keymapping
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-
-    -  .. row 1
-
-       -  Key code
-
-       -  Meaning
-
-       -  Key examples on IR
-
-    -  .. row 2
-
-       -  **Numeric keys**
-
-    -  .. row 3
-
-       -  ``KEY_NUMERIC_0``
-
-       -  Keyboard digit 0
-
-       -  0
-
-    -  .. row 4
-
-       -  ``KEY_NUMERIC_1``
-
-       -  Keyboard digit 1
-
-       -  1
-
-    -  .. row 5
-
-       -  ``KEY_NUMERIC_2``
-
-       -  Keyboard digit 2
-
-       -  2
-
-    -  .. row 6
-
-       -  ``KEY_NUMERIC_3``
-
-       -  Keyboard digit 3
-
-       -  3
-
-    -  .. row 7
-
-       -  ``KEY_NUMERIC_4``
-
-       -  Keyboard digit 4
-
-       -  4
-
-    -  .. row 8
-
-       -  ``KEY_NUMERIC_5``
-
-       -  Keyboard digit 5
-
-       -  5
-
-    -  .. row 9
-
-       -  ``KEY_NUMERIC_6``
-
-       -  Keyboard digit 6
-
-       -  6
-
-    -  .. row 10
-
-       -  ``KEY_NUMERIC_7``
-
-       -  Keyboard digit 7
-
-       -  7
-
-    -  .. row 11
-
-       -  ``KEY_NUMERIC_8``
-
-       -  Keyboard digit 8
-
-       -  8
-
-    -  .. row 12
-
-       -  ``KEY_NUMERIC_9``
-
-       -  Keyboard digit 9
-
-       -  9
-
-    -  .. row 13
-
-       -  **Movie play control**
-
-    -  .. row 14
-
-       -  ``KEY_FORWARD``
-
-       -  Instantly advance in time
-
-       -  >> / FORWARD
-
-    -  .. row 15
-
-       -  ``KEY_BACK``
-
-       -  Instantly go back in time
-
-       -  <<< / BACK
-
-    -  .. row 16
-
-       -  ``KEY_FASTFORWARD``
-
-       -  Play movie faster
-
-       -  >>> / FORWARD
-
-    -  .. row 17
-
-       -  ``KEY_REWIND``
-
-       -  Play movie back
-
-       -  REWIND / BACKWARD
-
-    -  .. row 18
-
-       -  ``KEY_NEXT``
-
-       -  Select next chapter / sub-chapter / interval
-
-       -  NEXT / SKIP
-
-    -  .. row 19
-
-       -  ``KEY_PREVIOUS``
-
-       -  Select previous chapter / sub-chapter / interval
-
-       -  << / PREV / PREVIOUS
-
-    -  .. row 20
-
-       -  ``KEY_AGAIN``
-
-       -  Repeat the video or a video interval
-
-       -  REPEAT / LOOP / RECALL
-
-    -  .. row 21
-
-       -  ``KEY_PAUSE``
-
-       -  Pause stream
-
-       -  PAUSE / FREEZE
-
-    -  .. row 22
-
-       -  ``KEY_PLAY``
-
-       -  Play movie at the normal timeshift
-
-       -  NORMAL TIMESHIFT / LIVE / >
-
-    -  .. row 23
-
-       -  ``KEY_PLAYPAUSE``
-
-       -  Alternate between play and pause
-
-       -  PLAY / PAUSE
-
-    -  .. row 24
-
-       -  ``KEY_STOP``
-
-       -  Stop stream
-
-       -  STOP
-
-    -  .. row 25
-
-       -  ``KEY_RECORD``
-
-       -  Start/stop recording stream
-
-       -  CAPTURE / REC / RECORD/PAUSE
-
-    -  .. row 26
-
-       -  ``KEY_CAMERA``
-
-       -  Take a picture of the image
-
-       -  CAMERA ICON / CAPTURE / SNAPSHOT
-
-    -  .. row 27
-
-       -  ``KEY_SHUFFLE``
-
-       -  Enable shuffle mode
-
-       -  SHUFFLE
-
-    -  .. row 28
-
-       -  ``KEY_TIME``
-
-       -  Activate time shift mode
-
-       -  TIME SHIFT
-
-    -  .. row 29
-
-       -  ``KEY_TITLE``
-
-       -  Allow changing the chapter
-
-       -  CHAPTER
-
-    -  .. row 30
-
-       -  ``KEY_SUBTITLE``
-
-       -  Allow changing the subtitle
-
-       -  SUBTITLE
-
-    -  .. row 31
-
-       -  **Image control**
-
-    -  .. row 32
-
-       -  ``KEY_BRIGHTNESSDOWN``
-
-       -  Decrease Brightness
-
-       -  BRIGHTNESS DECREASE
-
-    -  .. row 33
-
-       -  ``KEY_BRIGHTNESSUP``
-
-       -  Increase Brightness
-
-       -  BRIGHTNESS INCREASE
-
-    -  .. row 34
-
-       -  ``KEY_ANGLE``
-
-       -  Switch video camera angle (on videos with more than one angle
-	  stored)
-
-       -  ANGLE / SWAP
-
-    -  .. row 35
-
-       -  ``KEY_EPG``
-
-       -  Open the Elecrowonic Play Guide (EPG)
-
-       -  EPG / GUIDE
-
-    -  .. row 36
-
-       -  ``KEY_TEXT``
-
-       -  Activate/change closed caption mode
-
-       -  CLOSED CAPTION/TELETEXT / DVD TEXT / TELETEXT / TTX
-
-    -  .. row 37
-
-       -  **Audio control**
-
-    -  .. row 38
-
-       -  ``KEY_AUDIO``
-
-       -  Change audio source
-
-       -  AUDIO SOURCE / AUDIO / MUSIC
-
-    -  .. row 39
-
-       -  ``KEY_MUTE``
-
-       -  Mute/unmute audio
-
-       -  MUTE / DEMUTE / UNMUTE
-
-    -  .. row 40
-
-       -  ``KEY_VOLUMEDOWN``
-
-       -  Decrease volume
-
-       -  VOLUME- / VOLUME DOWN
-
-    -  .. row 41
-
-       -  ``KEY_VOLUMEUP``
-
-       -  Increase volume
-
-       -  VOLUME+ / VOLUME UP
-
-    -  .. row 42
-
-       -  ``KEY_MODE``
-
-       -  Change sound mode
-
-       -  MONO/STEREO
-
-    -  .. row 43
-
-       -  ``KEY_LANGUAGE``
-
-       -  Select Language
-
-       -  1ST / 2ND LANGUAGE / DVD LANG / MTS/SAP / MTS SEL
-
-    -  .. row 44
-
-       -  **Channel control**
-
-    -  .. row 45
-
-       -  ``KEY_CHANNEL``
-
-       -  Go to the next favorite channel
-
-       -  ALT / CHANNEL / CH SURFING / SURF / FAV
-
-    -  .. row 46
-
-       -  ``KEY_CHANNELDOWN``
-
-       -  Decrease channel sequentially
-
-       -  CHANNEL - / CHANNEL DOWN / DOWN
-
-    -  .. row 47
-
-       -  ``KEY_CHANNELUP``
-
-       -  Increase channel sequentially
-
-       -  CHANNEL + / CHANNEL UP / UP
-
-    -  .. row 48
-
-       -  ``KEY_DIGITS``
-
-       -  Use more than one digit for channel
-
-       -  PLUS / 100/ 1xx / xxx / -/-- / Single Double Triple Digit
-
-    -  .. row 49
-
-       -  ``KEY_SEARCH``
-
-       -  Start channel autoscan
-
-       -  SCAN / AUTOSCAN
-
-    -  .. row 50
-
-       -  **Colored keys**
-
-    -  .. row 51
-
-       -  ``KEY_BLUE``
-
-       -  IR Blue key
-
-       -  BLUE
-
-    -  .. row 52
-
-       -  ``KEY_GREEN``
-
-       -  IR Green Key
-
-       -  GREEN
-
-    -  .. row 53
-
-       -  ``KEY_RED``
-
-       -  IR Red key
-
-       -  RED
-
-    -  .. row 54
-
-       -  ``KEY_YELLOW``
-
-       -  IR Yellow key
-
-       -  YELLOW
-
-    -  .. row 55
-
-       -  **Media selection**
-
-    -  .. row 56
-
-       -  ``KEY_CD``
-
-       -  Change input source to Compact Disc
-
-       -  CD
-
-    -  .. row 57
-
-       -  ``KEY_DVD``
-
-       -  Change input to DVD
-
-       -  DVD / DVD MENU
-
-    -  .. row 58
-
-       -  ``KEY_EJECTCLOSECD``
-
-       -  Open/close the CD/DVD player
-
-       -  -> ) / CLOSE / OPEN
-
-    -  .. row 59
-
-       -  ``KEY_MEDIA``
-
-       -  Turn on/off Media application
-
-       -  PC/TV / TURN ON/OFF APP
-
-    -  .. row 60
-
-       -  ``KEY_PC``
-
-       -  Selects from TV to PC
-
-       -  PC
-
-    -  .. row 61
-
-       -  ``KEY_RADIO``
-
-       -  Put into AM/FM radio mode
-
-       -  RADIO / TV/FM / TV/RADIO / FM / FM/RADIO
-
-    -  .. row 62
-
-       -  ``KEY_TV``
-
-       -  Select tv mode
-
-       -  TV / LIVE TV
-
-    -  .. row 63
-
-       -  ``KEY_TV2``
-
-       -  Select Cable mode
-
-       -  AIR/CBL
-
-    -  .. row 64
-
-       -  ``KEY_VCR``
-
-       -  Select VCR mode
-
-       -  VCR MODE / DTR
-
-    -  .. row 65
-
-       -  ``KEY_VIDEO``
-
-       -  Alternate between input modes
-
-       -  SOURCE / SELECT / DISPLAY / SWITCH INPUTS / VIDEO
-
-    -  .. row 66
-
-       -  **Power control**
-
-    -  .. row 67
-
-       -  ``KEY_POWER``
-
-       -  Turn on/off computer
-
-       -  SYSTEM POWER / COMPUTER POWER
-
-    -  .. row 68
-
-       -  ``KEY_POWER2``
-
-       -  Turn on/off application
-
-       -  TV ON/OFF / POWER
-
-    -  .. row 69
-
-       -  ``KEY_SLEEP``
-
-       -  Activate sleep timer
-
-       -  SLEEP / SLEEP TIMER
-
-    -  .. row 70
-
-       -  ``KEY_SUSPEND``
-
-       -  Put computer into suspend mode
-
-       -  STANDBY / SUSPEND
-
-    -  .. row 71
-
-       -  **Window control**
-
-    -  .. row 72
-
-       -  ``KEY_CLEAR``
-
-       -  Stop stream and return to default input video/audio
-
-       -  CLEAR / RESET / BOSS KEY
-
-    -  .. row 73
-
-       -  ``KEY_CYCLEWINDOWS``
-
-       -  Minimize windows and move to the next one
-
-       -  ALT-TAB / MINIMIZE / DESKTOP
-
-    -  .. row 74
-
-       -  ``KEY_FAVORITES``
-
-       -  Open the favorites stream window
-
-       -  TV WALL / Favorites
-
-    -  .. row 75
-
-       -  ``KEY_MENU``
-
-       -  Call application menu
-
-       -  2ND CONTROLS (USA: MENU) / DVD/MENU / SHOW/HIDE CTRL
-
-    -  .. row 76
-
-       -  ``KEY_NEW``
-
-       -  Open/Close Picture in Picture
-
-       -  PIP
-
-    -  .. row 77
-
-       -  ``KEY_OK``
-
-       -  Send a confirmation code to application
-
-       -  OK / ENTER / RETURN
-
-    -  .. row 78
-
-       -  ``KEY_ASPECT_RATIO``
-
-       -  Select screen aspect ratio
-
-       -  4:3 16:9 SELECT
-
-    -  .. row 79
-
-       -  ``KEY_FULL_SCREEN``
-
-       -  Put device into zoom/full screen mode
-
-       -  ZOOM / FULL SCREEN / ZOOM+ / HIDE PANNEL / SWITCH
-
-    -  .. row 80
-
-       -  **Navigation keys**
-
-    -  .. row 81
-
-       -  ``KEY_ESC``
-
-       -  Cancel current operation
-
-       -  CANCEL / BACK
-
-    -  .. row 82
-
-       -  ``KEY_HELP``
-
-       -  Open a Help window
-
-       -  HELP
-
-    -  .. row 83
-
-       -  ``KEY_HOMEPAGE``
-
-       -  Navigate to Homepage
-
-       -  HOME
-
-    -  .. row 84
-
-       -  ``KEY_INFO``
-
-       -  Open On Screen Display
-
-       -  DISPLAY INFORMATION / OSD
-
-    -  .. row 85
-
-       -  ``KEY_WWW``
-
-       -  Open the default browser
-
-       -  WEB
-
-    -  .. row 86
-
-       -  ``KEY_UP``
-
-       -  Up key
-
-       -  UP
-
-    -  .. row 87
-
-       -  ``KEY_DOWN``
-
-       -  Down key
-
-       -  DOWN
-
-    -  .. row 88
-
-       -  ``KEY_LEFT``
-
-       -  Left key
-
-       -  LEFT
-
-    -  .. row 89
-
-       -  ``KEY_RIGHT``
-
-       -  Right key
-
-       -  RIGHT
-
-    -  .. row 90
-
-       -  **Miscellaneous keys**
-
-    -  .. row 91
-
-       -  ``KEY_DOT``
-
-       -  Return a dot
-
-       -  .
-
-    -  .. row 92
-
-       -  ``KEY_FN``
-
-       -  Select a function
-
-       -  FUNCTION
-
-
-It should be noted that, sometimes, there some fundamental missing keys
-at some cheaper IR's. Due to that, it is recommended to:
-
-
-.. _rc_keymap_notes:
-
-.. flat-table:: Notes
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  On simpler IR's, without separate channel keys, you need to map UP
-	  as ``KEY_CHANNELUP``
-
-    -  .. row 2
-
-       -  On simpler IR's, without separate channel keys, you need to map
-	  DOWN as ``KEY_CHANNELDOWN``
-
-    -  .. row 3
-
-       -  On simpler IR's, without separate volume keys, you need to map
-	  LEFT as ``KEY_VOLUMEDOWN``
-
-    -  .. row 4
-
-       -  On simpler IR's, without separate volume keys, you need to map
-	  RIGHT as ``KEY_VOLUMEUP``
diff --git a/Documentation/media/uapi/rc/remote_controllers.rst b/Documentation/media/uapi/rc/remote_controllers.rst
deleted file mode 100644
index 20e0f986df49..000000000000
--- a/Documentation/media/uapi/rc/remote_controllers.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. include:: <isonum.txt>
-
-.. _remote_controllers:
-
-################################
-Part III - Remote Controller API
-################################
-
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-    :maxdepth: 5
-    :numbered:
-
-    rc-intro
-    rc-sysfs-nodes
-    rc-protos
-    rc-tables
-    rc-table-change
-    lirc-dev
-
-
-**********************
-Revision and Copyright
-**********************
-
-Authors:
-
-- Carvalho Chehab, Mauro <mchehab@kernel.org>
-
- - Initial version.
-
-**Copyright** |copy| 2009-2016 : Mauro Carvalho Chehab
-
-****************
-Revision History
-****************
-
-:revision: 3.15 / 2014-02-06 (*mcc*)
-
-Added the interface description and the RC sysfs class description.
-
-
-:revision: 1.0 / 2009-09-06 (*mcc*)
-
-Initial revision
diff --git a/Documentation/media/uapi/v4l/app-pri.rst b/Documentation/media/uapi/v4l/app-pri.rst
deleted file mode 100644
index c25c1271b4f6..000000000000
--- a/Documentation/media/uapi/v4l/app-pri.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _app-pri:
-
-********************
-Application Priority
-********************
-
-When multiple applications share a device it may be desirable to assign
-them different priorities. Contrary to the traditional "rm -rf /" school
-of thought, a video recording application could for example block other
-applications from changing video controls or switching the current TV
-channel. Another objective is to permit low priority applications
-working in background, which can be preempted by user controlled
-applications and automatically regain control of the device at a later
-time.
-
-Since these features cannot be implemented entirely in user space V4L2
-defines the :ref:`VIDIOC_G_PRIORITY <VIDIOC_G_PRIORITY>` and
-:ref:`VIDIOC_S_PRIORITY <VIDIOC_G_PRIORITY>` ioctls to request and
-query the access priority associate with a file descriptor. Opening a
-device assigns a medium priority, compatible with earlier versions of
-V4L2 and drivers not supporting these ioctls. Applications requiring a
-different priority will usually call :ref:`VIDIOC_S_PRIORITY
-<VIDIOC_G_PRIORITY>` after verifying the device with the
-:ref:`VIDIOC_QUERYCAP` ioctl.
-
-Ioctls changing driver properties, such as
-:ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>`, return an ``EBUSY`` error code
-after another application obtained higher priority.
diff --git a/Documentation/media/uapi/v4l/async.rst b/Documentation/media/uapi/v4l/async.rst
deleted file mode 100644
index be9539313f60..000000000000
--- a/Documentation/media/uapi/v4l/async.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _async:
-
-****************
-Asynchronous I/O
-****************
-
-This method is not defined yet.
diff --git a/Documentation/media/uapi/v4l/audio.rst b/Documentation/media/uapi/v4l/audio.rst
deleted file mode 100644
index 4c7fdbc8a860..000000000000
--- a/Documentation/media/uapi/v4l/audio.rst
+++ /dev/null
@@ -1,104 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _audio:
-
-************************
-Audio Inputs and Outputs
-************************
-
-Audio inputs and outputs are physical connectors of a device. Video
-capture devices have inputs, output devices have outputs, zero or more
-each. Radio devices have no audio inputs or outputs. They have exactly
-one tuner which in fact *is* an audio source, but this API associates
-tuners with video inputs or outputs only, and radio devices have none of
-these. [#f1]_ A connector on a TV card to loop back the received audio
-signal to a sound card is not considered an audio output.
-
-Audio and video inputs and outputs are associated. Selecting a video
-source also selects an audio source. This is most evident when the video
-and audio source is a tuner. Further audio connectors can combine with
-more than one video input or output. Assumed two composite video inputs
-and two audio inputs exist, there may be up to four valid combinations.
-The relation of video and audio connectors is defined in the
-``audioset`` field of the respective struct
-:c:type:`v4l2_input` or struct
-:c:type:`v4l2_output`, where each bit represents the index
-number, starting at zero, of one audio input or output.
-
-To learn about the number and attributes of the available inputs and
-outputs applications can enumerate them with the
-:ref:`VIDIOC_ENUMAUDIO` and
-:ref:`VIDIOC_ENUMAUDOUT <VIDIOC_ENUMAUDOUT>` ioctl, respectively.
-The struct :c:type:`v4l2_audio` returned by the
-:ref:`VIDIOC_ENUMAUDIO` ioctl also contains signal
-status information applicable when the current audio input is queried.
-
-The :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` and
-:ref:`VIDIOC_G_AUDOUT <VIDIOC_G_AUDOUT>` ioctls report the current
-audio input and output, respectively.
-
-.. note::
-
-   Note that, unlike :ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` and
-   :ref:`VIDIOC_G_OUTPUT <VIDIOC_G_OUTPUT>` these ioctls return a
-   structure as :ref:`VIDIOC_ENUMAUDIO` and
-   :ref:`VIDIOC_ENUMAUDOUT <VIDIOC_ENUMAUDOUT>` do, not just an index.
-
-To select an audio input and change its properties applications call the
-:ref:`VIDIOC_S_AUDIO <VIDIOC_G_AUDIO>` ioctl. To select an audio
-output (which presently has no changeable properties) applications call
-the :ref:`VIDIOC_S_AUDOUT <VIDIOC_G_AUDOUT>` ioctl.
-
-Drivers must implement all audio input ioctls when the device has
-multiple selectable audio inputs, all audio output ioctls when the
-device has multiple selectable audio outputs. When the device has any
-audio inputs or outputs the driver must set the ``V4L2_CAP_AUDIO`` flag
-in the struct :c:type:`v4l2_capability` returned by
-the :ref:`VIDIOC_QUERYCAP` ioctl.
-
-
-Example: Information about the current audio input
-==================================================
-
-.. code-block:: c
-
-    struct v4l2_audio audio;
-
-    memset(&audio, 0, sizeof(audio));
-
-    if (-1 == ioctl(fd, VIDIOC_G_AUDIO, &audio)) {
-	perror("VIDIOC_G_AUDIO");
-	exit(EXIT_FAILURE);
-    }
-
-    printf("Current input: %s\\n", audio.name);
-
-
-Example: Switching to the first audio input
-===========================================
-
-.. code-block:: c
-
-    struct v4l2_audio audio;
-
-    memset(&audio, 0, sizeof(audio)); /* clear audio.mode, audio.reserved */
-
-    audio.index = 0;
-
-    if (-1 == ioctl(fd, VIDIOC_S_AUDIO, &audio)) {
-	perror("VIDIOC_S_AUDIO");
-	exit(EXIT_FAILURE);
-    }
-
-.. [#f1]
-   Actually struct :c:type:`v4l2_audio` ought to have a
-   ``tuner`` field like struct :c:type:`v4l2_input`, not
-   only making the API more consistent but also permitting radio devices
-   with multiple tuners.
diff --git a/Documentation/media/uapi/v4l/bayer.svg b/Documentation/media/uapi/v4l/bayer.svg
deleted file mode 100644
index c5bf85103901..000000000000
--- a/Documentation/media/uapi/v4l/bayer.svg
+++ /dev/null
@@ -1,56 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-    This file is dual-licensed: you can use it either under the terms
-    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-    dual licensing only applies to this file, and not this project as a
-    whole.
-
-    a) This file is free software; you can redistribute it and/or
-       modify it under the terms of the GNU General Public License as
-       published by the Free Software Foundation version 2 of
-       the License.
-
-       This file is distributed in the hope that it will be useful,
-       but WITHOUT ANY WARRANTY; without even the implied warranty of
-       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-       GNU General Public License for more details.
-
-    Or, alternatively,
-
-    b) Permission is granted to copy, distribute and/or modify this
-       document under the terms of the GNU Free Documentation License,
-       Version 1.1 or any later version published by the Free Software
-       Foundation, with no Invariant Sections, no Front-Cover Texts
-       and no Back-Cover Texts. A copy of the license is included at
-       Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg id="svg2" width="164.15mm" height="46.771mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 16415.333 4677.1107" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata652"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><g id="g186" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id6"><rect id="rect189" class="BoundingBox" x="3299" y="3199" width="1303" height="1203" fill="none"/><path id="path191" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path193" d="m3950
-4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text195" class="TextShape"><tspan id="tspan197" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan199" class="TextPosition" x="3739" y="4021"><tspan id="tspan201" fill="#ffffff">B</tspan></tspan></tspan></text>
-</g></g><g id="g203" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id7"><rect id="rect206" class="BoundingBox" x="4599" y="3199" width="1303" height="1203" fill="none"/><path id="path208" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path210" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text212" class="TextShape"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="5003" y="4021"><tspan id="tspan218" fill="#ffffff">G</tspan></tspan></tspan></text>
-</g></g><g id="g220" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id8"><rect id="rect223" class="BoundingBox" x="3299" y="4399" width="1303" height="1203" fill="none"/><path id="path225" d="m3950 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path227" d="m3950 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text229" class="TextShape"><tspan id="tspan231" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan233" class="TextPosition" x="3703" y="5221"><tspan id="tspan235" fill="#ffffff">G</tspan></tspan></tspan></text>
-</g></g><g id="g237" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id9"><rect id="rect240" class="BoundingBox" x="4599" y="4399" width="1303" height="1203" fill="none"/><path id="path242" d="m5250 5600h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path244" d="m5250 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text246" class="TextShape"><tspan id="tspan248" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan250" class="TextPosition" x="5022" y="5221"><tspan id="tspan252" fill="#ffffff">R</tspan></tspan></tspan></text>
-</g></g><g id="g254" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id10" fill="none"><rect id="rect257" class="BoundingBox" x="5999" y="3299" width="1003" height="1003"/><path id="path259" d="m6500 4300h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g261" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id11" fill="none"><rect id="rect264" class="BoundingBox" x="4699" y="5699" width="1003" height="1003"/><path id="path266" d="m5200 6700h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g268" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id12"><rect id="rect271" class="BoundingBox" x="4e3" y="6900" width="2374" height="963" fill="none"/><text id="text273" class="TextShape"><tspan id="tspan275" class="TextParagraph" font-family="sans-serif" font-size="635px"
-font-weight="400"><tspan id="tspan277" class="TextPosition" x="4250" y="7601"><tspan id="tspan279" fill="#000000">BGGR</tspan></tspan></tspan></text>
-</g></g><g id="g281" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id13"><rect id="rect284" class="BoundingBox" x="8799" y="3199" width="1303" height="1203" fill="none"/><path id="path286" d="m9450 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path288" d="m9450 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text290" class="TextShape"><tspan id="tspan292" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan294" class="TextPosition" x="9239" y="4021"><tspan id="tspan296" fill="#ffffff">B</tspan></tspan></tspan></text>
-</g></g><g id="g298" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id14"><rect id="rect301" class="BoundingBox" x="7499" y="3199" width="1303" height="1203" fill="none"/><path id="path303" d="m8150 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path305" d="m8150 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text307" class="TextShape"><tspan id="tspan309" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan311" class="TextPosition" x="7903" y="4021"><tspan id="tspan313" fill="#ffffff">G</tspan></tspan></tspan></text>
-</g></g><g id="g315" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id15"><rect id="rect318" class="BoundingBox" x="8799" y="4399" width="1303" height="1203" fill="none"/><path id="path320" d="m9450 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path322" d="m9450 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text324" class="TextShape"><tspan id="tspan326" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan328" class="TextPosition" x="9203" y="5221"><tspan id="tspan330" fill="#ffffff">G</tspan></tspan></tspan></text>
-</g></g><g id="g332" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id16"><rect id="rect335" class="BoundingBox" x="7499" y="4399" width="1303" height="1203" fill="none"/><path id="path337" d="m8150 5600h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path339" d="m8150 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text341" class="TextShape"><tspan id="tspan343" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan345" class="TextPosition" x="7922" y="5221"><tspan id="tspan347" fill="#ffffff">R</tspan></tspan></tspan></text>
-</g></g><g id="g349" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id17"><rect id="rect352" class="BoundingBox" x="8200" y="6900" width="2374" height="963" fill="none"/><text id="text354" class="TextShape"><tspan id="tspan356" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan358" class="TextPosition" x="8450" y="7601"><tspan id="tspan360" fill="#000000">GBRG</tspan></tspan></tspan></text>
-</g></g><g id="g362" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id18"><rect id="rect365" class="BoundingBox" x="17299" y="4399" width="1303" height="1203" fill="none"/><path id="path367" d="m17950 5600h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path369" d="m17950 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text371" class="TextShape"><tspan id="tspan373" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan375" class="TextPosition" x="17739" y="5221"><tspan id="tspan377" fill="#ffffff">B</tspan></tspan></tspan></text>
-</g></g><g id="g379" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id19"><rect id="rect382" class="BoundingBox" x="17299" y="3199" width="1303" height="1203" fill="none"/><path id="path384" d="m17950 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path386" d="m17950 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text388" class="TextShape"><tspan id="tspan390" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan392" class="TextPosition" x="17703" y="4021"><tspan id="tspan394" fill="#ffffff">G</tspan></tspan></tspan></text>
-</g></g><g id="g396" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id20"><rect id="rect399" class="BoundingBox" x="15999" y="4399" width="1303" height="1203" fill="none"/><path id="path401" d="m16650 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path403" d="m16650 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text405" class="TextShape"><tspan id="tspan407" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan409" class="TextPosition" x="16403" y="5221"><tspan id="tspan411" fill="#ffffff">G</tspan></tspan></tspan></text>
-</g></g><g id="g413" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id21"><rect id="rect416" class="BoundingBox" x="15999" y="3199" width="1303" height="1203" fill="none"/><path id="path418" d="m16650 4400h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path420" d="m16650 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text422" class="TextShape"><tspan id="tspan424" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan426" class="TextPosition" x="16422" y="4021"><tspan id="tspan428" fill="#ffffff">R</tspan></tspan></tspan></text>
-</g></g><g id="g430" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id22"><rect id="rect433" class="BoundingBox" x="16700" y="6900" width="2374" height="963" fill="none"/><text id="text435" class="TextShape"><tspan id="tspan437" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan439" class="TextPosition" x="16950" y="7601"><tspan id="tspan441" fill="#000000">RGGB</tspan></tspan></tspan></text>
-</g></g><g id="g443" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id23"><rect id="rect446" class="BoundingBox" x="11699" y="4399" width="1303" height="1203" fill="none"/><path id="path448" d="m12350 5600h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path450" d="m12350 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text452" class="TextShape"><tspan id="tspan454" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan456" class="TextPosition" x="12139" y="5221"><tspan id="tspan458" fill="#ffffff">B</tspan></tspan></tspan></text>
-</g></g><g id="g460" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id24"><rect id="rect463" class="BoundingBox" x="11699" y="3199" width="1303" height="1203" fill="none"/><path id="path465" d="m12350 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path467" d="m12350 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text469" class="TextShape"><tspan id="tspan471" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan473" class="TextPosition" x="12103" y="4021"><tspan id="tspan475" fill="#ffffff">G</tspan></tspan></tspan></text>
-</g></g><g id="g477" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id25"><rect id="rect480" class="BoundingBox" x="12999" y="4399" width="1303" height="1203" fill="none"/><path id="path482" d="m13650 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path484" d="m13650 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text486" class="TextShape"><tspan id="tspan488" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan490" class="TextPosition" x="13403" y="5221"><tspan id="tspan492" fill="#ffffff">G</tspan></tspan></tspan></text>
-</g></g><g id="g494" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id26"><rect id="rect497" class="BoundingBox" x="12999" y="3199" width="1303" height="1203" fill="none"/><path id="path499" d="m13650 4400h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path501" d="m13650 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text503" class="TextShape"><tspan id="tspan505" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan507" class="TextPosition" x="13422" y="4021"><tspan id="tspan509" fill="#ffffff">R</tspan></tspan></tspan></text>
-</g></g><g id="g511" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id27"><rect id="rect514" class="BoundingBox" x="12400" y="6900" width="2374" height="963" fill="none"/><text id="text516" class="TextShape"><tspan id="tspan518" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan520" class="TextPosition" x="12650" y="7601"><tspan id="tspan522" fill="#000000">GRBG</tspan></tspan></tspan></text>
-</g></g><g id="g524" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id28" fill="none"><rect id="rect527" class="BoundingBox" x="5999" y="5699" width="1003" height="1003"/><path id="path529" d="m6500 6700h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g531" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id29" fill="none"><rect id="rect534" class="BoundingBox" x="3399" y="5699" width="1003" height="1003"/><path id="path536" d="m3900 6700h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g538" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id30" fill="none"><rect id="rect541" class="BoundingBox" x="5999" y="4499" width="1003" height="1003"/><path id="path543" d="m6500 5500h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g545"
-class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id31" fill="none"><rect id="rect548" class="BoundingBox" x="7599" y="5799" width="1003" height="1003"/><path id="path550" d="m8100 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g552" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id32" fill="none"><rect id="rect555" class="BoundingBox" x="10199" y="5799" width="1003" height="1003"/><path id="path557" d="m10700 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g559" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id33" fill="none"><rect id="rect562" class="BoundingBox" x="8899" y="5799" width="1003" height="1003"/><path id="path564" d="m9400 6800h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g566" class="com.sun.star.drawing.CustomShape"
-transform="translate(-3285.9 -3185.9)"><g id="id34" fill="none"><rect id="rect569" class="BoundingBox" x="10199" y="4499" width="1003" height="1003"/><path id="path571" d="m10700 5500h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g573" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id35" fill="none"><rect id="rect576" class="BoundingBox" x="10199" y="3299" width="1003" height="1003"/><path id="path578" d="m10700 4300h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g580" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id36" fill="none"><rect id="rect583" class="BoundingBox" x="14399" y="3299" width="1003" height="1003"/><path id="path585" d="m14900 4300h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g587" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g
-id="id37" fill="none"><rect id="rect590" class="BoundingBox" x="14399" y="5799" width="1003" height="1003"/><path id="path592" d="m14900 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g594" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id38" fill="none"><rect id="rect597" class="BoundingBox" x="11799" y="5799" width="1003" height="1003"/><path id="path599" d="m12300 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g601" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id39" fill="none"><rect id="rect604" class="BoundingBox" x="14399" y="4499" width="1003" height="1003"/><path id="path606" d="m14900 5500h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g608" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id40" fill="none"><rect id="rect611"
-class="BoundingBox" x="13099" y="5799" width="1003" height="1003"/><path id="path613" d="m13600 6800h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g615" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id41" fill="none"><rect id="rect618" class="BoundingBox" x="16099" y="5799" width="1003" height="1003"/><path id="path620" d="m16600 6800h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g622" class="com.sun.star.drawing.CustomShape" transform="translate(-3398.8 -3185.9)"><g id="id42" fill="none"><rect id="rect625" class="BoundingBox" x="18799" y="5799" width="1003" height="1003"/><path id="path627" d="m19300 6800h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g629" class="com.sun.star.drawing.CustomShape" transform="translate(-3398.8 -3185.9)"><g id="id43" fill="none"><rect id="rect632" class="BoundingBox" x="18799" y="3299"
-width="1003" height="1003"/><path id="path634" d="m19300 4300h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g636" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id44" fill="none"><rect id="rect639" class="BoundingBox" x="17399" y="5799" width="1003" height="1003"/><path id="path641" d="m17900 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g643" class="com.sun.star.drawing.CustomShape" transform="translate(-3398.8 -3185.9)"><g id="id45" fill="none"><rect id="rect646" class="BoundingBox" x="18799" y="4499" width="1003" height="1003"/><path id="path648" d="m19300 5500h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g></svg>
diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst
deleted file mode 100644
index 8095f57d3d75..000000000000
--- a/Documentation/media/uapi/v4l/biblio.rst
+++ /dev/null
@@ -1,416 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-**********
-References
-**********
-
-
-.. _cea608:
-
-CEA 608-E
-=========
-
-
-:title:     CEA-608-E R-2014 "Line 21 Data Services"
-
-:author:    Consumer Electronics Association (http://www.ce.org)
-
-.. _en300294:
-
-EN 300 294
-==========
-
-
-:title:     EN 300 294 "625-line television Wide Screen Signalling (WSS)"
-
-:author:    European Telecommunication Standards Institute (http://www.etsi.org)
-
-.. _ets300231:
-
-ETS 300 231
-===========
-
-
-:title:     ETS 300 231 "Specification of the domestic video Programme Delivery Control system (PDC)"
-
-:author:    European Telecommunication Standards Institute (http://www.etsi.org)
-
-.. _ets300706:
-
-ETS 300 706
-===========
-
-
-:title:     ETS 300 706 "Enhanced Teletext specification"
-
-:author:    European Telecommunication Standards Institute (http://www.etsi.org)
-
-.. _mpeg2part1:
-
-ISO 13818-1
-===========
-
-
-:title:     ITU-T Rec. H.222.0 | ISO/IEC 13818-1 "Information technology — Generic coding of moving pictures and associated audio information: Systems"
-
-:author:    International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch)
-
-.. _mpeg2part2:
-
-ISO 13818-2
-===========
-
-
-:title:     ITU-T Rec. H.262 | ISO/IEC 13818-2 "Information technology — Generic coding of moving pictures and associated audio information: Video"
-
-:author:    International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch)
-
-.. _itu470:
-
-ITU BT.470
-==========
-
-
-:title:     ITU-R Recommendation BT.470-6 "Conventional Television Systems"
-
-:author:    International Telecommunication Union (http://www.itu.ch)
-
-.. _itu601:
-
-ITU BT.601
-==========
-
-
-:title:     ITU-R Recommendation BT.601-5 "Studio Encoding Parameters of Digital Television for Standard 4:3 and Wide-Screen 16:9 Aspect Ratios"
-
-:author:    International Telecommunication Union (http://www.itu.ch)
-
-.. _itu653:
-
-ITU BT.653
-==========
-
-
-:title:     ITU-R Recommendation BT.653-3 "Teletext systems"
-
-:author:    International Telecommunication Union (http://www.itu.ch)
-
-.. _itu709:
-
-ITU BT.709
-==========
-
-
-:title:     ITU-R Recommendation BT.709-5 "Parameter values for the HDTV standards for production and international programme exchange"
-
-:author:    International Telecommunication Union (http://www.itu.ch)
-
-.. _itu1119:
-
-ITU BT.1119
-===========
-
-
-:title:     ITU-R Recommendation BT.1119 "625-line television Wide Screen Signalling (WSS)"
-
-:author:    International Telecommunication Union (http://www.itu.ch)
-
-.. _h264:
-
-ITU-T Rec. H.264 Specification (04/2017 Edition)
-================================================
-
-:title:     ITU-T Recommendation H.264 "Advanced Video Coding for Generic Audiovisual Services"
-
-:author:    International Telecommunication Union (http://www.itu.ch)
-
-.. _hevc:
-
-ITU H.265/HEVC
-==============
-
-:title:     ITU-T Rec. H.265 | ISO/IEC 23008-2 "High Efficiency Video Coding"
-
-:author:    International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch)
-
-.. _jfif:
-
-JFIF
-====
-
-
-:title:     JPEG File Interchange Format
-:subtitle:  Version 1.02
-
-:author:    Independent JPEG Group (http://www.ijg.org)
-
-.. _itu-t81:
-
-ITU-T.81
-========
-
-
-:title:     ITU-T Recommendation T.81 "Information Technology — Digital Compression and Coding of Continous-Tone Still Images — Requirements and Guidelines"
-
-:author:    International Telecommunication Union (http://www.itu.int)
-
-.. _w3c-jpeg-jfif:
-
-W3C JPEG JFIF
-=============
-
-
-:title:     JPEG JFIF
-
-:author:    The World Wide Web Consortium (http://www.w3.org)
-
-.. _smpte12m:
-
-SMPTE 12M
-=========
-
-
-:title:     SMPTE 12M-1999 "Television, Audio and Film - Time and Control Code"
-
-:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
-
-.. _smpte170m:
-
-SMPTE 170M
-==========
-
-
-:title:     SMPTE 170M-1999 "Television - Composite Analog Video Signal - NTSC for Studio Applications"
-
-:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
-
-.. _smpte240m:
-
-SMPTE 240M
-==========
-
-
-:title:     SMPTE 240M-1999 "Television - Signal Parameters - 1125-Line High-Definition Production"
-
-:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
-
-.. _smpte431:
-
-SMPTE RP 431-2
-==============
-
-
-:title:     SMPTE RP 431-2:2011 "D-Cinema Quality - Reference Projector and Environment"
-
-:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
-
-.. _smpte2084:
-
-SMPTE ST 2084
-=============
-
-
-:title:     SMPTE ST 2084:2014 "High Dynamic Range Electro-Optical Transfer Function of Master Reference Displays"
-
-:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
-
-.. _srgb:
-
-sRGB
-====
-
-
-:title:     IEC 61966-2-1 ed1.0 "Multimedia systems and equipment - Colour measurement and management - Part 2-1: Colour management - Default RGB colour space - sRGB"
-
-:author:    International Electrotechnical Commission (http://www.iec.ch)
-
-.. _sycc:
-
-sYCC
-====
-
-
-:title:     IEC 61966-2-1-am1 ed1.0 "Amendment 1 - Multimedia systems and equipment - Colour measurement and management - Part 2-1: Colour management - Default RGB colour space - sRGB"
-
-:author:    International Electrotechnical Commission (http://www.iec.ch)
-
-.. _xvycc:
-
-xvYCC
-=====
-
-
-:title:     IEC 61966-2-4 ed1.0 "Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC"
-
-:author:    International Electrotechnical Commission (http://www.iec.ch)
-
-.. _oprgb:
-
-opRGB
-=====
-
-
-:title:     IEC 61966-2-5 "Multimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - Optional RGB colour space - opRGB"
-
-:author:    International Electrotechnical Commission (http://www.iec.ch)
-
-.. _itu2020:
-
-ITU BT.2020
-===========
-
-
-:title:     ITU-R Recommendation BT.2020 (08/2012) "Parameter values for ultra-high definition television systems for production and international programme exchange"
-
-:author:    International Telecommunication Union (http://www.itu.ch)
-
-.. _tech3213:
-
-EBU Tech 3213
-=============
-
-
-:title:     E.B.U. Standard for Chromaticity Tolerances for Studio Monitors"
-
-:author:    European Broadcast Union (http://www.ebu.ch)
-
-.. _iec62106:
-
-IEC 62106
-=========
-
-
-:title:     Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz
-
-:author:    International Electrotechnical Commission (http://www.iec.ch)
-
-.. _nrsc4:
-
-NRSC-4-B
-========
-
-
-:title:     NRSC-4-B: United States RBDS Standard
-
-:author:    National Radio Systems Committee (http://www.nrscstandards.org)
-
-.. _iso12232:
-
-ISO 12232:2006
-==============
-
-
-:title:     Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index
-
-:author:    International Organization for Standardization (http://www.iso.org)
-
-.. _cea861:
-
-CEA-861-E
-=========
-
-
-:title:     A DTV Profile for Uncompressed High Speed Digital Interfaces
-
-:author:    Consumer Electronics Association (http://www.ce.org)
-
-.. _vesadmt:
-
-VESA DMT
-========
-
-
-:title:     VESA and Industry Standards and Guidelines for Computer Display Monitor Timing (DMT)
-
-:author:    Video Electronics Standards Association (http://www.vesa.org)
-
-.. _vesaedid:
-
-EDID
-====
-
-
-:title:     VESA Enhanced Extended Display Identification Data Standard
-:subtitle:  Release A, Revision 2
-
-:author:    Video Electronics Standards Association (http://www.vesa.org)
-
-.. _hdcp:
-
-HDCP
-====
-
-
-:title:     High-bandwidth Digital Content Protection System
-:subtitle:  Revision 1.3
-
-:author:    Digital Content Protection LLC (http://www.digital-cp.com)
-
-.. _hdmi:
-
-HDMI
-====
-
-
-:title:     High-Definition Multimedia Interface
-:subtitle:  Specification Version 1.4a
-
-:author:    HDMI Licensing LLC (http://www.hdmi.org)
-
-.. _hdmi2:
-
-HDMI2
-=====
-
-:title:     High-Definition Multimedia Interface
-:subtitle:  Specification Version 2.0
-
-:author:    HDMI Licensing LLC (http://www.hdmi.org)
-
-.. _dp:
-
-DP
-==
-
-
-:title:     VESA DisplayPort Standard
-:subtitle:  Version 1, Revision 2
-
-:author:    Video Electronics Standards Association (http://www.vesa.org)
-
-.. _poynton:
-
-poynton
-=======
-
-
-:title:     Digital Video and HDTV, Algorithms and Interfaces
-
-:author:    Charles Poynton
-
-.. _colimg:
-
-colimg
-======
-
-
-:title:     Color Imaging: Fundamentals and Applications
-
-:author:    Erik Reinhard et al.
-
-.. _vp8:
-
-VP8
-===
-
-
-:title:     RFC 6386: "VP8 Data Format and Decoding Guide"
-
-:author:    J. Bankoski et al.
diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst
deleted file mode 100644
index 3112300c2fa0..000000000000
--- a/Documentation/media/uapi/v4l/buffer.rst
+++ /dev/null
@@ -1,817 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _buffer:
-
-*******
-Buffers
-*******
-
-A buffer contains data exchanged by application and driver using one of
-the Streaming I/O methods. In the multi-planar API, the data is held in
-planes, while the buffer structure acts as a container for the planes.
-Only pointers to buffers (planes) are exchanged, the data itself is not
-copied. These pointers, together with meta-information like timestamps
-or field parity, are stored in a struct :c:type:`v4l2_buffer`,
-argument to the :ref:`VIDIOC_QUERYBUF`,
-:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` and
-:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. In the multi-planar API,
-some plane-specific members of struct :c:type:`v4l2_buffer`,
-such as pointers and sizes for each plane, are stored in struct
-struct :c:type:`v4l2_plane` instead. In that case, struct
-struct :c:type:`v4l2_buffer` contains an array of plane structures.
-
-Dequeued video buffers come with timestamps. The driver decides at which
-part of the frame and with which clock the timestamp is taken. Please
-see flags in the masks ``V4L2_BUF_FLAG_TIMESTAMP_MASK`` and
-``V4L2_BUF_FLAG_TSTAMP_SRC_MASK`` in :ref:`buffer-flags`. These flags
-are always valid and constant across all buffers during the whole video
-stream. Changes in these flags may take place as a side effect of
-:ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` or
-:ref:`VIDIOC_S_OUTPUT <VIDIOC_G_OUTPUT>` however. The
-``V4L2_BUF_FLAG_TIMESTAMP_COPY`` timestamp type which is used by e.g. on
-mem-to-mem devices is an exception to the rule: the timestamp source
-flags are copied from the OUTPUT video buffer to the CAPTURE video
-buffer.
-
-
-Interactions between formats, controls and buffers
-==================================================
-
-V4L2 exposes parameters that influence the buffer size, or the way data is
-laid out in the buffer. Those parameters are exposed through both formats and
-controls. One example of such a control is the ``V4L2_CID_ROTATE`` control
-that modifies the direction in which pixels are stored in the buffer, as well
-as the buffer size when the selected format includes padding at the end of
-lines.
-
-The set of information needed to interpret the content of a buffer (e.g. the
-pixel format, the line stride, the tiling orientation or the rotation) is
-collectively referred to in the rest of this section as the buffer layout.
-
-Controls that can modify the buffer layout shall set the
-``V4L2_CTRL_FLAG_MODIFY_LAYOUT`` flag.
-
-Modifying formats or controls that influence the buffer size or layout require
-the stream to be stopped. Any attempt at such a modification while the stream
-is active shall cause the ioctl setting the format or the control to return
-the ``EBUSY`` error code. In that case drivers shall also set the
-``V4L2_CTRL_FLAG_GRABBED`` flag when calling
-:c:func:`VIDIOC_QUERYCTRL` or :c:func:`VIDIOC_QUERY_EXT_CTRL` for such a
-control while the stream is active.
-
-.. note::
-
-   The :c:func:`VIDIOC_S_SELECTION` ioctl can, depending on the hardware (for
-   instance if the device doesn't include a scaler), modify the format in
-   addition to the selection rectangle. Similarly, the
-   :c:func:`VIDIOC_S_INPUT`, :c:func:`VIDIOC_S_OUTPUT`, :c:func:`VIDIOC_S_STD`
-   and :c:func:`VIDIOC_S_DV_TIMINGS` ioctls can also modify the format and
-   selection rectangles. When those ioctls result in a buffer size or layout
-   change, drivers shall handle that condition as they would handle it in the
-   :c:func:`VIDIOC_S_FMT` ioctl in all cases described in this section.
-
-Controls that only influence the buffer layout can be modified at any time
-when the stream is stopped. As they don't influence the buffer size, no
-special handling is needed to synchronize those controls with buffer
-allocation and the ``V4L2_CTRL_FLAG_GRABBED`` flag is cleared once the
-stream is stopped.
-
-Formats and controls that influence the buffer size interact with buffer
-allocation. The simplest way to handle this is for drivers to always require
-buffers to be reallocated in order to change those formats or controls. In
-that case, to perform such changes, userspace applications shall first stop
-the video stream with the :c:func:`VIDIOC_STREAMOFF` ioctl if it is running
-and free all buffers with the :c:func:`VIDIOC_REQBUFS` ioctl if they are
-allocated. After freeing all buffers the ``V4L2_CTRL_FLAG_GRABBED`` flag
-for controls is cleared. The format or controls can then be modified, and
-buffers shall then be reallocated and the stream restarted. A typical ioctl
-sequence is
-
- #. VIDIOC_STREAMOFF
- #. VIDIOC_REQBUFS(0)
- #. VIDIOC_S_EXT_CTRLS
- #. VIDIOC_S_FMT
- #. VIDIOC_REQBUFS(n)
- #. VIDIOC_QBUF
- #. VIDIOC_STREAMON
-
-The second :c:func:`VIDIOC_REQBUFS` call will take the new format and control
-value into account to compute the buffer size to allocate. Applications can
-also retrieve the size by calling the :c:func:`VIDIOC_G_FMT` ioctl if needed.
-
-.. note::
-
-   The API doesn't mandate the above order for control (3.) and format (4.)
-   changes. Format and controls can be set in a different order, or even
-   interleaved, depending on the device and use case. For instance some
-   controls might behave differently for different pixel formats, in which
-   case the format might need to be set first.
-
-When reallocation is required, any attempt to modify format or controls that
-influences the buffer size while buffers are allocated shall cause the format
-or control set ioctl to return the ``EBUSY`` error. Any attempt to queue a
-buffer too small for the current format or controls shall cause the
-:c:func:`VIDIOC_QBUF` ioctl to return a ``EINVAL`` error.
-
-Buffer reallocation is an expensive operation. To avoid that cost, drivers can
-(and are encouraged to) allow format or controls that influence the buffer
-size to be changed with buffers allocated. In that case, a typical ioctl
-sequence to modify format and controls is
-
- #. VIDIOC_STREAMOFF
- #. VIDIOC_S_EXT_CTRLS
- #. VIDIOC_S_FMT
- #. VIDIOC_QBUF
- #. VIDIOC_STREAMON
-
-For this sequence to operate correctly, queued buffers need to be large enough
-for the new format or controls. Drivers shall return a ``ENOSPC`` error in
-response to format change (:c:func:`VIDIOC_S_FMT`) or control changes
-(:c:func:`VIDIOC_S_CTRL` or :c:func:`VIDIOC_S_EXT_CTRLS`) if buffers too small
-for the new format are currently queued. As a simplification, drivers are
-allowed to return a ``EBUSY`` error from these ioctls if any buffer is
-currently queued, without checking the queued buffers sizes.
-
-Additionally, drivers shall return a ``EINVAL`` error from the
-:c:func:`VIDIOC_QBUF` ioctl if the buffer being queued is too small for the
-current format or controls. Together, these requirements ensure that queued
-buffers will always be large enough for the configured format and controls.
-
-Userspace applications can query the buffer size required for a given format
-and controls by first setting the desired control values and then trying the
-desired format. The :c:func:`VIDIOC_TRY_FMT` ioctl will return the required
-buffer size.
-
- #. VIDIOC_S_EXT_CTRLS(x)
- #. VIDIOC_TRY_FMT()
- #. VIDIOC_S_EXT_CTRLS(y)
- #. VIDIOC_TRY_FMT()
-
-The :c:func:`VIDIOC_CREATE_BUFS` ioctl can then be used to allocate buffers
-based on the queried sizes (for instance by allocating a set of buffers large
-enough for all the desired formats and controls, or by allocating separate set
-of appropriately sized buffers for each use case).
-
-
-.. c:type:: v4l2_buffer
-
-struct v4l2_buffer
-==================
-
-.. tabularcolumns:: |p{2.8cm}|p{2.5cm}|p{1.6cm}|p{10.2cm}|
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_buffer
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 2 10
-
-    * - __u32
-      - ``index``
-      - Number of the buffer, set by the application except when calling
-	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, then it is set by the
-	driver. This field can range from zero to the number of buffers
-	allocated with the :ref:`VIDIOC_REQBUFS` ioctl
-	(struct :c:type:`v4l2_requestbuffers`
-	``count``), plus any buffers allocated with
-	:ref:`VIDIOC_CREATE_BUFS` minus one.
-    * - __u32
-      - ``type``
-      - Type of the buffer, same as struct
-	:c:type:`v4l2_format` ``type`` or struct
-	:c:type:`v4l2_requestbuffers` ``type``, set
-	by the application. See :c:type:`v4l2_buf_type`
-    * - __u32
-      - ``bytesused``
-      - The number of bytes occupied by the data in the buffer. It depends
-	on the negotiated data format and may change with each buffer for
-	compressed variable size data like JPEG images. Drivers must set
-	this field when ``type`` refers to a capture stream, applications
-	when it refers to an output stream. If the application sets this
-	to 0 for an output stream, then ``bytesused`` will be set to the
-	size of the buffer (see the ``length`` field of this struct) by
-	the driver. For multiplanar formats this field is ignored and the
-	``planes`` pointer is used instead.
-    * - __u32
-      - ``flags``
-      - Flags set by the application or driver, see :ref:`buffer-flags`.
-    * - __u32
-      - ``field``
-      - Indicates the field order of the image in the buffer, see
-	:c:type:`v4l2_field`. This field is not used when the buffer
-	contains VBI data. Drivers must set it when ``type`` refers to a
-	capture stream, applications when it refers to an output stream.
-    * - struct timeval
-      - ``timestamp``
-      - For capture streams this is time when the first data byte was
-	captured, as returned by the :c:func:`clock_gettime()` function
-	for the relevant clock id; see ``V4L2_BUF_FLAG_TIMESTAMP_*`` in
-	:ref:`buffer-flags`. For output streams the driver stores the
-	time at which the last data byte was actually sent out in the
-	``timestamp`` field. This permits applications to monitor the
-	drift between the video and system clock. For output streams that
-	use ``V4L2_BUF_FLAG_TIMESTAMP_COPY`` the application has to fill
-	in the timestamp which will be copied by the driver to the capture
-	stream.
-    * - struct :c:type:`v4l2_timecode`
-      - ``timecode``
-      - When the ``V4L2_BUF_FLAG_TIMECODE`` flag is set in ``flags``, this
-	structure contains a frame timecode. In
-	:c:type:`V4L2_FIELD_ALTERNATE <v4l2_field>` mode the top and
-	bottom field contain the same timecode. Timecodes are intended to
-	help video editing and are typically recorded on video tapes, but
-	also embedded in compressed formats like MPEG. This field is
-	independent of the ``timestamp`` and ``sequence`` fields.
-    * - __u32
-      - ``sequence``
-      - Set by the driver, counting the frames (not fields!) in sequence.
-	This field is set for both input and output devices.
-    * - :cspan:`2`
-
-	In :c:type:`V4L2_FIELD_ALTERNATE <v4l2_field>` mode the top and
-	bottom field have the same sequence number. The count starts at
-	zero and includes dropped or repeated frames. A dropped frame was
-	received by an input device but could not be stored due to lack of
-	free buffer space. A repeated frame was displayed again by an
-	output device because the application did not pass new data in
-	time.
-
-	.. note::
-
-	   This may count the frames received e.g. over USB, without
-	   taking into account the frames dropped by the remote hardware due
-	   to limited compression throughput or bus bandwidth. These devices
-	   identify by not enumerating any video standards, see
-	   :ref:`standard`.
-
-    * - __u32
-      - ``memory``
-      - This field must be set by applications and/or drivers in
-	accordance with the selected I/O method. See :c:type:`v4l2_memory`
-    * - union {
-      - ``m``
-    * - __u32
-      - ``offset``
-      - For the single-planar API and when ``memory`` is
-	``V4L2_MEMORY_MMAP`` this is the offset of the buffer from the
-	start of the device memory. The value is returned by the driver
-	and apart of serving as parameter to the
-	:ref:`mmap() <func-mmap>` function not useful for applications.
-	See :ref:`mmap` for details
-    * - unsigned long
-      - ``userptr``
-      - For the single-planar API and when ``memory`` is
-	``V4L2_MEMORY_USERPTR`` this is a pointer to the buffer (casted to
-	unsigned long type) in virtual memory, set by the application. See
-	:ref:`userp` for details.
-    * - struct v4l2_plane
-      - ``*planes``
-      - When using the multi-planar API, contains a userspace pointer to
-	an array of struct :c:type:`v4l2_plane`. The size of
-	the array should be put in the ``length`` field of this
-	struct :c:type:`v4l2_buffer` structure.
-    * - int
-      - ``fd``
-      - For the single-plane API and when ``memory`` is
-	``V4L2_MEMORY_DMABUF`` this is the file descriptor associated with
-	a DMABUF buffer.
-    * - }
-      -
-    * - __u32
-      - ``length``
-      - Size of the buffer (not the payload) in bytes for the
-	single-planar API. This is set by the driver based on the calls to
-	:ref:`VIDIOC_REQBUFS` and/or
-	:ref:`VIDIOC_CREATE_BUFS`. For the
-	multi-planar API the application sets this to the number of
-	elements in the ``planes`` array. The driver will fill in the
-	actual number of valid elements in that array.
-    * - __u32
-      - ``reserved2``
-      - A place holder for future extensions. Drivers and applications
-	must set this to 0.
-    * - __u32
-      - ``request_fd``
-      - The file descriptor of the request to queue the buffer to. If the flag
-        ``V4L2_BUF_FLAG_REQUEST_FD`` is set, then the buffer will be
-	queued to this request. If the flag is not set, then this field will
-	be ignored.
-
-	The ``V4L2_BUF_FLAG_REQUEST_FD`` flag and this field are only used by
-	:ref:`ioctl VIDIOC_QBUF <VIDIOC_QBUF>` and ignored by other ioctls that
-	take a :c:type:`v4l2_buffer` as argument.
-
-	Applications should not set ``V4L2_BUF_FLAG_REQUEST_FD`` for any ioctls
-	other than :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`.
-
-	If the device does not support requests, then ``EBADR`` will be returned.
-	If requests are supported but an invalid request file descriptor is
-	given, then ``EINVAL`` will be returned.
-
-
-
-.. c:type:: v4l2_plane
-
-struct v4l2_plane
-=================
-
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``bytesused``
-      - The number of bytes occupied by data in the plane (its payload).
-	Drivers must set this field when ``type`` refers to a capture
-	stream, applications when it refers to an output stream. If the
-	application sets this to 0 for an output stream, then
-	``bytesused`` will be set to the size of the plane (see the
-	``length`` field of this struct) by the driver.
-
-	.. note::
-
-	   Note that the actual image data starts at ``data_offset``
-	   which may not be 0.
-    * - __u32
-      - ``length``
-      - Size in bytes of the plane (not its payload). This is set by the
-	driver based on the calls to
-	:ref:`VIDIOC_REQBUFS` and/or
-	:ref:`VIDIOC_CREATE_BUFS`.
-    * - union {
-      - ``m``
-    * - __u32
-      - ``mem_offset``
-      - When the memory type in the containing struct
-	:c:type:`v4l2_buffer` is ``V4L2_MEMORY_MMAP``, this
-	is the value that should be passed to :ref:`mmap() <func-mmap>`,
-	similar to the ``offset`` field in struct
-	:c:type:`v4l2_buffer`.
-    * - unsigned long
-      - ``userptr``
-      - When the memory type in the containing struct
-	:c:type:`v4l2_buffer` is ``V4L2_MEMORY_USERPTR``,
-	this is a userspace pointer to the memory allocated for this plane
-	by an application.
-    * - int
-      - ``fd``
-      - When the memory type in the containing struct
-	:c:type:`v4l2_buffer` is ``V4L2_MEMORY_DMABUF``,
-	this is a file descriptor associated with a DMABUF buffer, similar
-	to the ``fd`` field in struct :c:type:`v4l2_buffer`.
-    * - }
-      -
-    * - __u32
-      - ``data_offset``
-      - Offset in bytes to video data in the plane. Drivers must set this
-	field when ``type`` refers to a capture stream, applications when
-	it refers to an output stream.
-
-	.. note::
-
-	   That data_offset is included  in ``bytesused``. So the
-	   size of the image in the plane is ``bytesused``-``data_offset``
-	   at offset ``data_offset`` from the start of the plane.
-    * - __u32
-      - ``reserved[11]``
-      - Reserved for future use. Should be zeroed by drivers and
-	applications.
-
-
-
-.. c:type:: v4l2_buf_type
-
-enum v4l2_buf_type
-==================
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{7.8cm}|p{0.6cm}|p{9.1cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       4 1 9
-
-    * - ``V4L2_BUF_TYPE_VIDEO_CAPTURE``
-      - 1
-      - Buffer of a single-planar video capture stream, see
-	:ref:`capture`.
-    * - ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``
-      - 9
-      - Buffer of a multi-planar video capture stream, see
-	:ref:`capture`.
-    * - ``V4L2_BUF_TYPE_VIDEO_OUTPUT``
-      - 2
-      - Buffer of a single-planar video output stream, see
-	:ref:`output`.
-    * - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``
-      - 10
-      - Buffer of a multi-planar video output stream, see :ref:`output`.
-    * - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``
-      - 3
-      - Buffer for video overlay, see :ref:`overlay`.
-    * - ``V4L2_BUF_TYPE_VBI_CAPTURE``
-      - 4
-      - Buffer of a raw VBI capture stream, see :ref:`raw-vbi`.
-    * - ``V4L2_BUF_TYPE_VBI_OUTPUT``
-      - 5
-      - Buffer of a raw VBI output stream, see :ref:`raw-vbi`.
-    * - ``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE``
-      - 6
-      - Buffer of a sliced VBI capture stream, see :ref:`sliced`.
-    * - ``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``
-      - 7
-      - Buffer of a sliced VBI output stream, see :ref:`sliced`.
-    * - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY``
-      - 8
-      - Buffer for video output overlay (OSD), see :ref:`osd`.
-    * - ``V4L2_BUF_TYPE_SDR_CAPTURE``
-      - 11
-      - Buffer for Software Defined Radio (SDR) capture stream, see
-	:ref:`sdr`.
-    * - ``V4L2_BUF_TYPE_SDR_OUTPUT``
-      - 12
-      - Buffer for Software Defined Radio (SDR) output stream, see
-	:ref:`sdr`.
-    * - ``V4L2_BUF_TYPE_META_CAPTURE``
-      - 13
-      - Buffer for metadata capture, see :ref:`metadata`.
-    * - ``V4L2_BUF_TYPE_META_OUTPUT``
-      - 14
-      - Buffer for metadata output, see :ref:`metadata`.
-
-
-
-.. _buffer-flags:
-
-Buffer Flags
-============
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{7.0cm}|p{2.1cm}|p{8.4cm}|
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * .. _`V4L2-BUF-FLAG-MAPPED`:
-
-      - ``V4L2_BUF_FLAG_MAPPED``
-      - 0x00000001
-      - The buffer resides in device memory and has been mapped into the
-	application's address space, see :ref:`mmap` for details.
-	Drivers set or clear this flag when the
-	:ref:`VIDIOC_QUERYBUF`,
-	:ref:`VIDIOC_QBUF` or
-	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called. Set by the
-	driver.
-    * .. _`V4L2-BUF-FLAG-QUEUED`:
-
-      - ``V4L2_BUF_FLAG_QUEUED``
-      - 0x00000002
-      - Internally drivers maintain two buffer queues, an incoming and
-	outgoing queue. When this flag is set, the buffer is currently on
-	the incoming queue. It automatically moves to the outgoing queue
-	after the buffer has been filled (capture devices) or displayed
-	(output devices). Drivers set or clear this flag when the
-	``VIDIOC_QUERYBUF`` ioctl is called. After (successful) calling
-	the ``VIDIOC_QBUF``\ ioctl it is always set and after
-	``VIDIOC_DQBUF`` always cleared.
-    * .. _`V4L2-BUF-FLAG-DONE`:
-
-      - ``V4L2_BUF_FLAG_DONE``
-      - 0x00000004
-      - When this flag is set, the buffer is currently on the outgoing
-	queue, ready to be dequeued from the driver. Drivers set or clear
-	this flag when the ``VIDIOC_QUERYBUF`` ioctl is called. After
-	calling the ``VIDIOC_QBUF`` or ``VIDIOC_DQBUF`` it is always
-	cleared. Of course a buffer cannot be on both queues at the same
-	time, the ``V4L2_BUF_FLAG_QUEUED`` and ``V4L2_BUF_FLAG_DONE`` flag
-	are mutually exclusive. They can be both cleared however, then the
-	buffer is in "dequeued" state, in the application domain so to
-	say.
-    * .. _`V4L2-BUF-FLAG-ERROR`:
-
-      - ``V4L2_BUF_FLAG_ERROR``
-      - 0x00000040
-      - When this flag is set, the buffer has been dequeued successfully,
-	although the data might have been corrupted. This is recoverable,
-	streaming may continue as normal and the buffer may be reused
-	normally. Drivers set this flag when the ``VIDIOC_DQBUF`` ioctl is
-	called.
-    * .. _`V4L2-BUF-FLAG-IN-REQUEST`:
-
-      - ``V4L2_BUF_FLAG_IN_REQUEST``
-      - 0x00000080
-      - This buffer is part of a request that hasn't been queued yet.
-    * .. _`V4L2-BUF-FLAG-KEYFRAME`:
-
-      - ``V4L2_BUF_FLAG_KEYFRAME``
-      - 0x00000008
-      - Drivers set or clear this flag when calling the ``VIDIOC_DQBUF``
-	ioctl. It may be set by video capture devices when the buffer
-	contains a compressed image which is a key frame (or field), i. e.
-	can be decompressed on its own. Also known as an I-frame.
-	Applications can set this bit when ``type`` refers to an output
-	stream.
-    * .. _`V4L2-BUF-FLAG-PFRAME`:
-
-      - ``V4L2_BUF_FLAG_PFRAME``
-      - 0x00000010
-      - Similar to ``V4L2_BUF_FLAG_KEYFRAME`` this flags predicted frames
-	or fields which contain only differences to a previous key frame.
-	Applications can set this bit when ``type`` refers to an output
-	stream.
-    * .. _`V4L2-BUF-FLAG-BFRAME`:
-
-      - ``V4L2_BUF_FLAG_BFRAME``
-      - 0x00000020
-      - Similar to ``V4L2_BUF_FLAG_KEYFRAME`` this flags a bi-directional
-	predicted frame or field which contains only the differences
-	between the current frame and both the preceding and following key
-	frames to specify its content. Applications can set this bit when
-	``type`` refers to an output stream.
-    * .. _`V4L2-BUF-FLAG-TIMECODE`:
-
-      - ``V4L2_BUF_FLAG_TIMECODE``
-      - 0x00000100
-      - The ``timecode`` field is valid. Drivers set or clear this flag
-	when the ``VIDIOC_DQBUF`` ioctl is called. Applications can set
-	this bit and the corresponding ``timecode`` structure when
-	``type`` refers to an output stream.
-    * .. _`V4L2-BUF-FLAG-PREPARED`:
-
-      - ``V4L2_BUF_FLAG_PREPARED``
-      - 0x00000400
-      - The buffer has been prepared for I/O and can be queued by the
-	application. Drivers set or clear this flag when the
-	:ref:`VIDIOC_QUERYBUF`,
-	:ref:`VIDIOC_PREPARE_BUF <VIDIOC_QBUF>`,
-	:ref:`VIDIOC_QBUF` or
-	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called.
-    * .. _`V4L2-BUF-FLAG-NO-CACHE-INVALIDATE`:
-
-      - ``V4L2_BUF_FLAG_NO_CACHE_INVALIDATE``
-      - 0x00000800
-      - Caches do not have to be invalidated for this buffer. Typically
-	applications shall use this flag if the data captured in the
-	buffer is not going to be touched by the CPU, instead the buffer
-	will, probably, be passed on to a DMA-capable hardware unit for
-	further processing or output.
-    * .. _`V4L2-BUF-FLAG-NO-CACHE-CLEAN`:
-
-      - ``V4L2_BUF_FLAG_NO_CACHE_CLEAN``
-      - 0x00001000
-      - Caches do not have to be cleaned for this buffer. Typically
-	applications shall use this flag for output buffers if the data in
-	this buffer has not been created by the CPU but by some
-	DMA-capable unit, in which case caches have not been used.
-    * .. _`V4L2-BUF-FLAG-M2M-HOLD-CAPTURE-BUF`:
-
-      - ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF``
-      - 0x00000200
-      - Only valid if ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` is
-	set. It is typically used with stateless decoders where multiple
-	output buffers each decode to a slice of the decoded frame.
-	Applications can set this flag when queueing the output buffer
-	to prevent the driver from dequeueing the capture buffer after
-	the output buffer has been decoded (i.e. the capture buffer is
-	'held'). If the timestamp of this output buffer differs from that
-	of the previous output buffer, then that indicates the start of a
-	new frame and the previously held capture buffer is dequeued.
-    * .. _`V4L2-BUF-FLAG-LAST`:
-
-      - ``V4L2_BUF_FLAG_LAST``
-      - 0x00100000
-      - Last buffer produced by the hardware. mem2mem codec drivers set
-	this flag on the capture queue for the last buffer when the
-	:ref:`VIDIOC_QUERYBUF` or
-	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called. Due to
-	hardware limitations, the last buffer may be empty. In this case
-	the driver will set the ``bytesused`` field to 0, regardless of
-	the format. Any Any subsequent call to the
-	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will not block anymore,
-	but return an ``EPIPE`` error code.
-    * .. _`V4L2-BUF-FLAG-REQUEST-FD`:
-
-      - ``V4L2_BUF_FLAG_REQUEST_FD``
-      - 0x00800000
-      - The ``request_fd`` field contains a valid file descriptor.
-    * .. _`V4L2-BUF-FLAG-TIMESTAMP-MASK`:
-
-      - ``V4L2_BUF_FLAG_TIMESTAMP_MASK``
-      - 0x0000e000
-      - Mask for timestamp types below. To test the timestamp type, mask
-	out bits not belonging to timestamp type by performing a logical
-	and operation with buffer flags and timestamp mask.
-    * .. _`V4L2-BUF-FLAG-TIMESTAMP-UNKNOWN`:
-
-      - ``V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN``
-      - 0x00000000
-      - Unknown timestamp type. This type is used by drivers before Linux
-	3.9 and may be either monotonic (see below) or realtime (wall
-	clock). Monotonic clock has been favoured in embedded systems
-	whereas most of the drivers use the realtime clock. Either kinds
-	of timestamps are available in user space via
-	:c:func:`clock_gettime` using clock IDs ``CLOCK_MONOTONIC``
-	and ``CLOCK_REALTIME``, respectively.
-    * .. _`V4L2-BUF-FLAG-TIMESTAMP-MONOTONIC`:
-
-      - ``V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC``
-      - 0x00002000
-      - The buffer timestamp has been taken from the ``CLOCK_MONOTONIC``
-	clock. To access the same clock outside V4L2, use
-	:c:func:`clock_gettime`.
-    * .. _`V4L2-BUF-FLAG-TIMESTAMP-COPY`:
-
-      - ``V4L2_BUF_FLAG_TIMESTAMP_COPY``
-      - 0x00004000
-      - The CAPTURE buffer timestamp has been taken from the corresponding
-	OUTPUT buffer. This flag applies only to mem2mem devices.
-    * .. _`V4L2-BUF-FLAG-TSTAMP-SRC-MASK`:
-
-      - ``V4L2_BUF_FLAG_TSTAMP_SRC_MASK``
-      - 0x00070000
-      - Mask for timestamp sources below. The timestamp source defines the
-	point of time the timestamp is taken in relation to the frame.
-	Logical 'and' operation between the ``flags`` field and
-	``V4L2_BUF_FLAG_TSTAMP_SRC_MASK`` produces the value of the
-	timestamp source. Applications must set the timestamp source when
-	``type`` refers to an output stream and
-	``V4L2_BUF_FLAG_TIMESTAMP_COPY`` is set.
-    * .. _`V4L2-BUF-FLAG-TSTAMP-SRC-EOF`:
-
-      - ``V4L2_BUF_FLAG_TSTAMP_SRC_EOF``
-      - 0x00000000
-      - End Of Frame. The buffer timestamp has been taken when the last
-	pixel of the frame has been received or the last pixel of the
-	frame has been transmitted. In practice, software generated
-	timestamps will typically be read from the clock a small amount of
-	time after the last pixel has been received or transmitten,
-	depending on the system and other activity in it.
-    * .. _`V4L2-BUF-FLAG-TSTAMP-SRC-SOE`:
-
-      - ``V4L2_BUF_FLAG_TSTAMP_SRC_SOE``
-      - 0x00010000
-      - Start Of Exposure. The buffer timestamp has been taken when the
-	exposure of the frame has begun. This is only valid for the
-	``V4L2_BUF_TYPE_VIDEO_CAPTURE`` buffer type.
-
-.. raw:: latex
-
-    \normalsize
-
-
-.. c:type:: v4l2_memory
-
-enum v4l2_memory
-================
-
-.. tabularcolumns:: |p{5.0cm}|p{0.8cm}|p{11.7cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_MEMORY_MMAP``
-      - 1
-      - The buffer is used for :ref:`memory mapping <mmap>` I/O.
-    * - ``V4L2_MEMORY_USERPTR``
-      - 2
-      - The buffer is used for :ref:`user pointer <userp>` I/O.
-    * - ``V4L2_MEMORY_OVERLAY``
-      - 3
-      - [to do]
-    * - ``V4L2_MEMORY_DMABUF``
-      - 4
-      - The buffer is used for :ref:`DMA shared buffer <dmabuf>` I/O.
-
-
-
-Timecodes
-=========
-
-The :c:type:`v4l2_buffer_timecode` structure is designed to hold a
-:ref:`smpte12m` or similar timecode.
-(struct :c:type:`timeval` timestamps are stored in the struct
-:c:type:`v4l2_buffer` ``timestamp`` field.)
-
-
-.. c:type:: v4l2_timecode
-
-struct v4l2_timecode
---------------------
-
-.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{12.3cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - Frame rate the timecodes are based on, see :ref:`timecode-type`.
-    * - __u32
-      - ``flags``
-      - Timecode flags, see :ref:`timecode-flags`.
-    * - __u8
-      - ``frames``
-      - Frame count, 0 ... 23/24/29/49/59, depending on the type of
-	timecode.
-    * - __u8
-      - ``seconds``
-      - Seconds count, 0 ... 59. This is a binary, not BCD number.
-    * - __u8
-      - ``minutes``
-      - Minutes count, 0 ... 59. This is a binary, not BCD number.
-    * - __u8
-      - ``hours``
-      - Hours count, 0 ... 29. This is a binary, not BCD number.
-    * - __u8
-      - ``userbits``\ [4]
-      - The "user group" bits from the timecode.
-
-
-
-.. _timecode-type:
-
-Timecode Types
---------------
-
-.. tabularcolumns:: |p{5.6cm}|p{0.8cm}|p{11.1cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_TC_TYPE_24FPS``
-      - 1
-      - 24 frames per second, i. e. film.
-    * - ``V4L2_TC_TYPE_25FPS``
-      - 2
-      - 25 frames per second, i. e. PAL or SECAM video.
-    * - ``V4L2_TC_TYPE_30FPS``
-      - 3
-      - 30 frames per second, i. e. NTSC video.
-    * - ``V4L2_TC_TYPE_50FPS``
-      - 4
-      -
-    * - ``V4L2_TC_TYPE_60FPS``
-      - 5
-      -
-
-
-
-.. _timecode-flags:
-
-Timecode Flags
---------------
-
-.. tabularcolumns:: |p{6.6cm}|p{1.4cm}|p{9.5cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_TC_FLAG_DROPFRAME``
-      - 0x0001
-      - Indicates "drop frame" semantics for counting frames in 29.97 fps
-	material. When set, frame numbers 0 and 1 at the start of each
-	minute, except minutes 0, 10, 20, 30, 40, 50 are omitted from the
-	count.
-    * - ``V4L2_TC_FLAG_COLORFRAME``
-      - 0x0002
-      - The "color frame" flag.
-    * - ``V4L2_TC_USERBITS_field``
-      - 0x000C
-      - Field mask for the "binary group flags".
-    * - ``V4L2_TC_USERBITS_USERDEFINED``
-      - 0x0000
-      - Unspecified format.
-    * - ``V4L2_TC_USERBITS_8BITCHARS``
-      - 0x0008
-      - 8-bit ISO characters.
diff --git a/Documentation/media/uapi/v4l/capture-example.rst b/Documentation/media/uapi/v4l/capture-example.rst
deleted file mode 100644
index 130ca47ef796..000000000000
--- a/Documentation/media/uapi/v4l/capture-example.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _capture-example:
-
-*********************
-Video Capture Example
-*********************
-
-
-.. toctree::
-    :maxdepth: 1
-
-    capture.c
diff --git a/Documentation/media/uapi/v4l/capture.c.rst b/Documentation/media/uapi/v4l/capture.c.rst
deleted file mode 100644
index b4652c2351f2..000000000000
--- a/Documentation/media/uapi/v4l/capture.c.rst
+++ /dev/null
@@ -1,671 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-file: media/v4l/capture.c
-=========================
-
-.. code-block:: c
-
-    /*
-     *  V4L2 video capture example
-     *
-     *  This program can be used and distributed without restrictions.
-     *
-     *      This program is provided with the V4L2 API
-     * see https://linuxtv.org/docs.php for more information
-     */
-
-    #include <stdio.h>
-    #include <stdlib.h>
-    #include <string.h>
-    #include <assert.h>
-
-    #include <getopt.h>             /* getopt_long() */
-
-    #include <fcntl.h>              /* low-level i/o */
-    #include <unistd.h>
-    #include <errno.h>
-    #include <sys/stat.h>
-    #include <sys/types.h>
-    #include <sys/time.h>
-    #include <sys/mman.h>
-    #include <sys/ioctl.h>
-
-    #include <linux/videodev2.h>
-
-    #define CLEAR(x) memset(&(x), 0, sizeof(x))
-
-    enum io_method {
-	    IO_METHOD_READ,
-	    IO_METHOD_MMAP,
-	    IO_METHOD_USERPTR,
-    };
-
-    struct buffer {
-	    void   *start;
-	    size_t  length;
-    };
-
-    static char            *dev_name;
-    static enum io_method   io = IO_METHOD_MMAP;
-    static int              fd = -1;
-    struct buffer          *buffers;
-    static unsigned int     n_buffers;
-    static int              out_buf;
-    static int              force_format;
-    static int              frame_count = 70;
-
-    static void errno_exit(const char *s)
-    {
-	    fprintf(stderr, "%s error %d, %s\\n", s, errno, strerror(errno));
-	    exit(EXIT_FAILURE);
-    }
-
-    static int xioctl(int fh, int request, void *arg)
-    {
-	    int r;
-
-	    do {
-		    r = ioctl(fh, request, arg);
-	    } while (-1 == r && EINTR == errno);
-
-	    return r;
-    }
-
-    static void process_image(const void *p, int size)
-    {
-	    if (out_buf)
-		    fwrite(p, size, 1, stdout);
-
-	    fflush(stderr);
-	    fprintf(stderr, ".");
-	    fflush(stdout);
-    }
-
-    static int read_frame(void)
-    {
-	    struct v4l2_buffer buf;
-	    unsigned int i;
-
-	    switch (io) {
-	    case IO_METHOD_READ:
-		    if (-1 == read(fd, buffers[0].start, buffers[0].length)) {
-			    switch (errno) {
-			    case EAGAIN:
-				    return 0;
-
-			    case EIO:
-				    /* Could ignore EIO, see spec. */
-
-				    /* fall through */
-
-			    default:
-				    errno_exit("read");
-			    }
-		    }
-
-		    process_image(buffers[0].start, buffers[0].length);
-		    break;
-
-	    case IO_METHOD_MMAP:
-		    CLEAR(buf);
-
-		    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    buf.memory = V4L2_MEMORY_MMAP;
-
-		    if (-1 == xioctl(fd, VIDIOC_DQBUF, &buf)) {
-			    switch (errno) {
-			    case EAGAIN:
-				    return 0;
-
-			    case EIO:
-				    /* Could ignore EIO, see spec. */
-
-				    /* fall through */
-
-			    default:
-				    errno_exit("VIDIOC_DQBUF");
-			    }
-		    }
-
-		    assert(buf.index < n_buffers);
-
-		    process_image(buffers[buf.index].start, buf.bytesused);
-
-		    if (-1 == xioctl(fd, VIDIOC_QBUF, &buf))
-			    errno_exit("VIDIOC_QBUF");
-		    break;
-
-	    case IO_METHOD_USERPTR:
-		    CLEAR(buf);
-
-		    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    buf.memory = V4L2_MEMORY_USERPTR;
-
-		    if (-1 == xioctl(fd, VIDIOC_DQBUF, &buf)) {
-			    switch (errno) {
-			    case EAGAIN:
-				    return 0;
-
-			    case EIO:
-				    /* Could ignore EIO, see spec. */
-
-				    /* fall through */
-
-			    default:
-				    errno_exit("VIDIOC_DQBUF");
-			    }
-		    }
-
-		    for (i = 0; i < n_buffers; ++i)
-			    if (buf.m.userptr == (unsigned long)buffers[i].start
-				&& buf.length == buffers[i].length)
-				    break;
-
-		    assert(i < n_buffers);
-
-		    process_image((void *)buf.m.userptr, buf.bytesused);
-
-		    if (-1 == xioctl(fd, VIDIOC_QBUF, &buf))
-			    errno_exit("VIDIOC_QBUF");
-		    break;
-	    }
-
-	    return 1;
-    }
-
-    static void mainloop(void)
-    {
-	    unsigned int count;
-
-	    count = frame_count;
-
-	    while (count-- > 0) {
-		    for (;;) {
-			    fd_set fds;
-			    struct timeval tv;
-			    int r;
-
-			    FD_ZERO(&fds);
-			    FD_SET(fd, &fds);
-
-			    /* Timeout. */
-			    tv.tv_sec = 2;
-			    tv.tv_usec = 0;
-
-			    r = select(fd + 1, &fds, NULL, NULL, &tv);
-
-			    if (-1 == r) {
-				    if (EINTR == errno)
-					    continue;
-				    errno_exit("select");
-			    }
-
-			    if (0 == r) {
-				    fprintf(stderr, "select timeout\\n");
-				    exit(EXIT_FAILURE);
-			    }
-
-			    if (read_frame())
-				    break;
-			    /* EAGAIN - continue select loop. */
-		    }
-	    }
-    }
-
-    static void stop_capturing(void)
-    {
-	    enum v4l2_buf_type type;
-
-	    switch (io) {
-	    case IO_METHOD_READ:
-		    /* Nothing to do. */
-		    break;
-
-	    case IO_METHOD_MMAP:
-	    case IO_METHOD_USERPTR:
-		    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    if (-1 == xioctl(fd, VIDIOC_STREAMOFF, &type))
-			    errno_exit("VIDIOC_STREAMOFF");
-		    break;
-	    }
-    }
-
-    static void start_capturing(void)
-    {
-	    unsigned int i;
-	    enum v4l2_buf_type type;
-
-	    switch (io) {
-	    case IO_METHOD_READ:
-		    /* Nothing to do. */
-		    break;
-
-	    case IO_METHOD_MMAP:
-		    for (i = 0; i < n_buffers; ++i) {
-			    struct v4l2_buffer buf;
-
-			    CLEAR(buf);
-			    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-			    buf.memory = V4L2_MEMORY_MMAP;
-			    buf.index = i;
-
-			    if (-1 == xioctl(fd, VIDIOC_QBUF, &buf))
-				    errno_exit("VIDIOC_QBUF");
-		    }
-		    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    if (-1 == xioctl(fd, VIDIOC_STREAMON, &type))
-			    errno_exit("VIDIOC_STREAMON");
-		    break;
-
-	    case IO_METHOD_USERPTR:
-		    for (i = 0; i < n_buffers; ++i) {
-			    struct v4l2_buffer buf;
-
-			    CLEAR(buf);
-			    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-			    buf.memory = V4L2_MEMORY_USERPTR;
-			    buf.index = i;
-			    buf.m.userptr = (unsigned long)buffers[i].start;
-			    buf.length = buffers[i].length;
-
-			    if (-1 == xioctl(fd, VIDIOC_QBUF, &buf))
-				    errno_exit("VIDIOC_QBUF");
-		    }
-		    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    if (-1 == xioctl(fd, VIDIOC_STREAMON, &type))
-			    errno_exit("VIDIOC_STREAMON");
-		    break;
-	    }
-    }
-
-    static void uninit_device(void)
-    {
-	    unsigned int i;
-
-	    switch (io) {
-	    case IO_METHOD_READ:
-		    free(buffers[0].start);
-		    break;
-
-	    case IO_METHOD_MMAP:
-		    for (i = 0; i < n_buffers; ++i)
-			    if (-1 == munmap(buffers[i].start, buffers[i].length))
-				    errno_exit("munmap");
-		    break;
-
-	    case IO_METHOD_USERPTR:
-		    for (i = 0; i < n_buffers; ++i)
-			    free(buffers[i].start);
-		    break;
-	    }
-
-	    free(buffers);
-    }
-
-    static void init_read(unsigned int buffer_size)
-    {
-	    buffers = calloc(1, sizeof(*buffers));
-
-	    if (!buffers) {
-		    fprintf(stderr, "Out of memory\\n");
-		    exit(EXIT_FAILURE);
-	    }
-
-	    buffers[0].length = buffer_size;
-	    buffers[0].start = malloc(buffer_size);
-
-	    if (!buffers[0].start) {
-		    fprintf(stderr, "Out of memory\\n");
-		    exit(EXIT_FAILURE);
-	    }
-    }
-
-    static void init_mmap(void)
-    {
-	    struct v4l2_requestbuffers req;
-
-	    CLEAR(req);
-
-	    req.count = 4;
-	    req.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	    req.memory = V4L2_MEMORY_MMAP;
-
-	    if (-1 == xioctl(fd, VIDIOC_REQBUFS, &req)) {
-		    if (EINVAL == errno) {
-			    fprintf(stderr, "%s does not support "
-				     "memory mappingn", dev_name);
-			    exit(EXIT_FAILURE);
-		    } else {
-			    errno_exit("VIDIOC_REQBUFS");
-		    }
-	    }
-
-	    if (req.count < 2) {
-		    fprintf(stderr, "Insufficient buffer memory on %s\\n",
-			     dev_name);
-		    exit(EXIT_FAILURE);
-	    }
-
-	    buffers = calloc(req.count, sizeof(*buffers));
-
-	    if (!buffers) {
-		    fprintf(stderr, "Out of memory\\n");
-		    exit(EXIT_FAILURE);
-	    }
-
-	    for (n_buffers = 0; n_buffers < req.count; ++n_buffers) {
-		    struct v4l2_buffer buf;
-
-		    CLEAR(buf);
-
-		    buf.type        = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    buf.memory      = V4L2_MEMORY_MMAP;
-		    buf.index       = n_buffers;
-
-		    if (-1 == xioctl(fd, VIDIOC_QUERYBUF, &buf))
-			    errno_exit("VIDIOC_QUERYBUF");
-
-		    buffers[n_buffers].length = buf.length;
-		    buffers[n_buffers].start =
-			    mmap(NULL /* start anywhere */,
-				  buf.length,
-				  PROT_READ | PROT_WRITE /* required */,
-				  MAP_SHARED /* recommended */,
-				  fd, buf.m.offset);
-
-		    if (MAP_FAILED == buffers[n_buffers].start)
-			    errno_exit("mmap");
-	    }
-    }
-
-    static void init_userp(unsigned int buffer_size)
-    {
-	    struct v4l2_requestbuffers req;
-
-	    CLEAR(req);
-
-	    req.count  = 4;
-	    req.type   = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	    req.memory = V4L2_MEMORY_USERPTR;
-
-	    if (-1 == xioctl(fd, VIDIOC_REQBUFS, &req)) {
-		    if (EINVAL == errno) {
-			    fprintf(stderr, "%s does not support "
-				     "user pointer i/on", dev_name);
-			    exit(EXIT_FAILURE);
-		    } else {
-			    errno_exit("VIDIOC_REQBUFS");
-		    }
-	    }
-
-	    buffers = calloc(4, sizeof(*buffers));
-
-	    if (!buffers) {
-		    fprintf(stderr, "Out of memory\\n");
-		    exit(EXIT_FAILURE);
-	    }
-
-	    for (n_buffers = 0; n_buffers < 4; ++n_buffers) {
-		    buffers[n_buffers].length = buffer_size;
-		    buffers[n_buffers].start = malloc(buffer_size);
-
-		    if (!buffers[n_buffers].start) {
-			    fprintf(stderr, "Out of memory\\n");
-			    exit(EXIT_FAILURE);
-		    }
-	    }
-    }
-
-    static void init_device(void)
-    {
-	    struct v4l2_capability cap;
-	    struct v4l2_cropcap cropcap;
-	    struct v4l2_crop crop;
-	    struct v4l2_format fmt;
-	    unsigned int min;
-
-	    if (-1 == xioctl(fd, VIDIOC_QUERYCAP, &cap)) {
-		    if (EINVAL == errno) {
-			    fprintf(stderr, "%s is no V4L2 device\\n",
-				     dev_name);
-			    exit(EXIT_FAILURE);
-		    } else {
-			    errno_exit("VIDIOC_QUERYCAP");
-		    }
-	    }
-
-	    if (!(cap.capabilities & V4L2_CAP_VIDEO_CAPTURE)) {
-		    fprintf(stderr, "%s is no video capture device\\n",
-			     dev_name);
-		    exit(EXIT_FAILURE);
-	    }
-
-	    switch (io) {
-	    case IO_METHOD_READ:
-		    if (!(cap.capabilities & V4L2_CAP_READWRITE)) {
-			    fprintf(stderr, "%s does not support read i/o\\n",
-				     dev_name);
-			    exit(EXIT_FAILURE);
-		    }
-		    break;
-
-	    case IO_METHOD_MMAP:
-	    case IO_METHOD_USERPTR:
-		    if (!(cap.capabilities & V4L2_CAP_STREAMING)) {
-			    fprintf(stderr, "%s does not support streaming i/o\\n",
-				     dev_name);
-			    exit(EXIT_FAILURE);
-		    }
-		    break;
-	    }
-
-
-	    /* Select video input, video standard and tune here. */
-
-
-	    CLEAR(cropcap);
-
-	    cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-	    if (0 == xioctl(fd, VIDIOC_CROPCAP, &cropcap)) {
-		    crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    crop.c = cropcap.defrect; /* reset to default */
-
-		    if (-1 == xioctl(fd, VIDIOC_S_CROP, &crop)) {
-			    switch (errno) {
-			    case EINVAL:
-				    /* Cropping not supported. */
-				    break;
-			    default:
-				    /* Errors ignored. */
-				    break;
-			    }
-		    }
-	    } else {
-		    /* Errors ignored. */
-	    }
-
-
-	    CLEAR(fmt);
-
-	    fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	    if (force_format) {
-		    fmt.fmt.pix.width       = 640;
-		    fmt.fmt.pix.height      = 480;
-		    fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
-		    fmt.fmt.pix.field       = V4L2_FIELD_INTERLACED;
-
-		    if (-1 == xioctl(fd, VIDIOC_S_FMT, &fmt))
-			    errno_exit("VIDIOC_S_FMT");
-
-		    /* Note VIDIOC_S_FMT may change width and height. */
-	    } else {
-		    /* Preserve original settings as set by v4l2-ctl for example */
-		    if (-1 == xioctl(fd, VIDIOC_G_FMT, &fmt))
-			    errno_exit("VIDIOC_G_FMT");
-	    }
-
-	    /* Buggy driver paranoia. */
-	    min = fmt.fmt.pix.width * 2;
-	    if (fmt.fmt.pix.bytesperline < min)
-		    fmt.fmt.pix.bytesperline = min;
-	    min = fmt.fmt.pix.bytesperline * fmt.fmt.pix.height;
-	    if (fmt.fmt.pix.sizeimage < min)
-		    fmt.fmt.pix.sizeimage = min;
-
-	    switch (io) {
-	    case IO_METHOD_READ:
-		    init_read(fmt.fmt.pix.sizeimage);
-		    break;
-
-	    case IO_METHOD_MMAP:
-		    init_mmap();
-		    break;
-
-	    case IO_METHOD_USERPTR:
-		    init_userp(fmt.fmt.pix.sizeimage);
-		    break;
-	    }
-    }
-
-    static void close_device(void)
-    {
-	    if (-1 == close(fd))
-		    errno_exit("close");
-
-	    fd = -1;
-    }
-
-    static void open_device(void)
-    {
-	    struct stat st;
-
-	    if (-1 == stat(dev_name, &st)) {
-		    fprintf(stderr, "Cannot identify '%s': %d, %s\\n",
-			     dev_name, errno, strerror(errno));
-		    exit(EXIT_FAILURE);
-	    }
-
-	    if (!S_ISCHR(st.st_mode)) {
-		    fprintf(stderr, "%s is no devicen", dev_name);
-		    exit(EXIT_FAILURE);
-	    }
-
-	    fd = open(dev_name, O_RDWR /* required */ | O_NONBLOCK, 0);
-
-	    if (-1 == fd) {
-		    fprintf(stderr, "Cannot open '%s': %d, %s\\n",
-			     dev_name, errno, strerror(errno));
-		    exit(EXIT_FAILURE);
-	    }
-    }
-
-    static void usage(FILE *fp, int argc, char **argv)
-    {
-	    fprintf(fp,
-		     "Usage: %s [options]\\n\\n"
-		     "Version 1.3\\n"
-		     "Options:\\n"
-		     "-d | --device name   Video device name [%s]n"
-		     "-h | --help          Print this messagen"
-		     "-m | --mmap          Use memory mapped buffers [default]n"
-		     "-r | --read          Use read() callsn"
-		     "-u | --userp         Use application allocated buffersn"
-		     "-o | --output        Outputs stream to stdoutn"
-		     "-f | --format        Force format to 640x480 YUYVn"
-		     "-c | --count         Number of frames to grab [%i]n"
-		     "",
-		     argv[0], dev_name, frame_count);
-    }
-
-    static const char short_options[] = "d:hmruofc:";
-
-    static const struct option
-    long_options[] = {
-	    { "device", required_argument, NULL, 'd' },
-	    { "help",   no_argument,       NULL, 'h' },
-	    { "mmap",   no_argument,       NULL, 'm' },
-	    { "read",   no_argument,       NULL, 'r' },
-	    { "userp",  no_argument,       NULL, 'u' },
-	    { "output", no_argument,       NULL, 'o' },
-	    { "format", no_argument,       NULL, 'f' },
-	    { "count",  required_argument, NULL, 'c' },
-	    { 0, 0, 0, 0 }
-    };
-
-    int main(int argc, char **argv)
-    {
-	    dev_name = "/dev/video0";
-
-	    for (;;) {
-		    int idx;
-		    int c;
-
-		    c = getopt_long(argc, argv,
-				    short_options, long_options, &idx);
-
-		    if (-1 == c)
-			    break;
-
-		    switch (c) {
-		    case 0: /* getopt_long() flag */
-			    break;
-
-		    case 'd':
-			    dev_name = optarg;
-			    break;
-
-		    case 'h':
-			    usage(stdout, argc, argv);
-			    exit(EXIT_SUCCESS);
-
-		    case 'm':
-			    io = IO_METHOD_MMAP;
-			    break;
-
-		    case 'r':
-			    io = IO_METHOD_READ;
-			    break;
-
-		    case 'u':
-			    io = IO_METHOD_USERPTR;
-			    break;
-
-		    case 'o':
-			    out_buf++;
-			    break;
-
-		    case 'f':
-			    force_format++;
-			    break;
-
-		    case 'c':
-			    errno = 0;
-			    frame_count = strtol(optarg, NULL, 0);
-			    if (errno)
-				    errno_exit(optarg);
-			    break;
-
-		    default:
-			    usage(stderr, argc, argv);
-			    exit(EXIT_FAILURE);
-		    }
-	    }
-
-	    open_device();
-	    init_device();
-	    start_capturing();
-	    mainloop();
-	    stop_capturing();
-	    uninit_device();
-	    close_device();
-	    fprintf(stderr, "\\n");
-	    return 0;
-    }
diff --git a/Documentation/media/uapi/v4l/colorspaces-defs.rst b/Documentation/media/uapi/v4l/colorspaces-defs.rst
deleted file mode 100644
index e122bbe3d799..000000000000
--- a/Documentation/media/uapi/v4l/colorspaces-defs.rst
+++ /dev/null
@@ -1,183 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-****************************
-Defining Colorspaces in V4L2
-****************************
-
-In V4L2 colorspaces are defined by four values. The first is the
-colorspace identifier (enum :c:type:`v4l2_colorspace`)
-which defines the chromaticities, the default transfer function, the
-default Y'CbCr encoding and the default quantization method. The second
-is the transfer function identifier (enum
-:c:type:`v4l2_xfer_func`) to specify non-standard
-transfer functions. The third is the Y'CbCr encoding identifier (enum
-:c:type:`v4l2_ycbcr_encoding`) to specify
-non-standard Y'CbCr encodings and the fourth is the quantization
-identifier (enum :c:type:`v4l2_quantization`) to
-specify non-standard quantization methods. Most of the time only the
-colorspace field of struct :c:type:`v4l2_pix_format`
-or struct :c:type:`v4l2_pix_format_mplane`
-needs to be filled in.
-
-.. _hsv-colorspace:
-
-On :ref:`HSV formats <hsv-formats>` the *Hue* is defined as the angle on
-the cylindrical color representation. Usually this angle is measured in
-degrees, i.e. 0-360. When we map this angle value into 8 bits, there are
-two basic ways to do it: Divide the angular value by 2 (0-179), or use the
-whole range, 0-255, dividing the angular value by 1.41. The enum
-:c:type:`v4l2_hsv_encoding` specifies which encoding is used.
-
-.. note:: The default R'G'B' quantization is full range for all
-   colorspaces except for BT.2020 which uses limited range R'G'B'
-   quantization.
-
-.. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
-
-.. c:type:: v4l2_colorspace
-
-.. flat-table:: V4L2 Colorspaces
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Identifier
-      - Details
-    * - ``V4L2_COLORSPACE_DEFAULT``
-      - The default colorspace. This can be used by applications to let
-	the driver fill in the colorspace.
-    * - ``V4L2_COLORSPACE_SMPTE170M``
-      - See :ref:`col-smpte-170m`.
-    * - ``V4L2_COLORSPACE_REC709``
-      - See :ref:`col-rec709`.
-    * - ``V4L2_COLORSPACE_SRGB``
-      - See :ref:`col-srgb`.
-    * - ``V4L2_COLORSPACE_OPRGB``
-      - See :ref:`col-oprgb`.
-    * - ``V4L2_COLORSPACE_BT2020``
-      - See :ref:`col-bt2020`.
-    * - ``V4L2_COLORSPACE_DCI_P3``
-      - See :ref:`col-dcip3`.
-    * - ``V4L2_COLORSPACE_SMPTE240M``
-      - See :ref:`col-smpte-240m`.
-    * - ``V4L2_COLORSPACE_470_SYSTEM_M``
-      - See :ref:`col-sysm`.
-    * - ``V4L2_COLORSPACE_470_SYSTEM_BG``
-      - See :ref:`col-sysbg`.
-    * - ``V4L2_COLORSPACE_JPEG``
-      - See :ref:`col-jpeg`.
-    * - ``V4L2_COLORSPACE_RAW``
-      - The raw colorspace. This is used for raw image capture where the
-	image is minimally processed and is using the internal colorspace
-	of the device. The software that processes an image using this
-	'colorspace' will have to know the internals of the capture
-	device.
-
-
-
-.. c:type:: v4l2_xfer_func
-
-.. tabularcolumns:: |p{5.5cm}|p{12.0cm}|
-
-.. flat-table:: V4L2 Transfer Function
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Identifier
-      - Details
-    * - ``V4L2_XFER_FUNC_DEFAULT``
-      - Use the default transfer function as defined by the colorspace.
-    * - ``V4L2_XFER_FUNC_709``
-      - Use the Rec. 709 transfer function.
-    * - ``V4L2_XFER_FUNC_SRGB``
-      - Use the sRGB transfer function.
-    * - ``V4L2_XFER_FUNC_OPRGB``
-      - Use the opRGB transfer function.
-    * - ``V4L2_XFER_FUNC_SMPTE240M``
-      - Use the SMPTE 240M transfer function.
-    * - ``V4L2_XFER_FUNC_NONE``
-      - Do not use a transfer function (i.e. use linear RGB values).
-    * - ``V4L2_XFER_FUNC_DCI_P3``
-      - Use the DCI-P3 transfer function.
-    * - ``V4L2_XFER_FUNC_SMPTE2084``
-      - Use the SMPTE 2084 transfer function. See :ref:`xf-smpte-2084`.
-
-
-
-.. c:type:: v4l2_ycbcr_encoding
-
-.. tabularcolumns:: |p{7.2cm}|p{10.3cm}|
-
-.. flat-table:: V4L2 Y'CbCr Encodings
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Identifier
-      - Details
-    * - ``V4L2_YCBCR_ENC_DEFAULT``
-      - Use the default Y'CbCr encoding as defined by the colorspace.
-    * - ``V4L2_YCBCR_ENC_601``
-      - Use the BT.601 Y'CbCr encoding.
-    * - ``V4L2_YCBCR_ENC_709``
-      - Use the Rec. 709 Y'CbCr encoding.
-    * - ``V4L2_YCBCR_ENC_XV601``
-      - Use the extended gamut xvYCC BT.601 encoding.
-    * - ``V4L2_YCBCR_ENC_XV709``
-      - Use the extended gamut xvYCC Rec. 709 encoding.
-    * - ``V4L2_YCBCR_ENC_BT2020``
-      - Use the default non-constant luminance BT.2020 Y'CbCr encoding.
-    * - ``V4L2_YCBCR_ENC_BT2020_CONST_LUM``
-      - Use the constant luminance BT.2020 Yc'CbcCrc encoding.
-    * - ``V4L2_YCBCR_ENC_SMPTE_240M``
-      - Use the SMPTE 240M Y'CbCr encoding.
-
-
-
-.. c:type:: v4l2_hsv_encoding
-
-.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
-
-.. flat-table:: V4L2 HSV Encodings
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Identifier
-      - Details
-    * - ``V4L2_HSV_ENC_180``
-      - For the Hue, each LSB is two degrees.
-    * - ``V4L2_HSV_ENC_256``
-      - For the Hue, the 360 degrees are mapped into 8 bits, i.e. each
-	LSB is roughly 1.41 degrees.
-
-
-
-.. c:type:: v4l2_quantization
-
-.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
-
-.. flat-table:: V4L2 Quantization Methods
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Identifier
-      - Details
-    * - ``V4L2_QUANTIZATION_DEFAULT``
-      - Use the default quantization encoding as defined by the
-	colorspace. This is always full range for R'G'B' (except for the
-	BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr.
-    * - ``V4L2_QUANTIZATION_FULL_RANGE``
-      - Use the full range quantization encoding. I.e. the range [0…1] is
-	mapped to [0…255] (with possible clipping to [1…254] to avoid the
-	0x00 and 0xff values). Cb and Cr are mapped from [-0.5…0.5] to
-	[0…255] (with possible clipping to [1…254] to avoid the 0x00 and
-	0xff values).
-    * - ``V4L2_QUANTIZATION_LIM_RANGE``
-      - Use the limited range quantization encoding. I.e. the range [0…1]
-	is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to
-	[16…240].
diff --git a/Documentation/media/uapi/v4l/colorspaces-details.rst b/Documentation/media/uapi/v4l/colorspaces-details.rst
deleted file mode 100644
index 8b0ba3668101..000000000000
--- a/Documentation/media/uapi/v4l/colorspaces-details.rst
+++ /dev/null
@@ -1,813 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-********************************
-Detailed Colorspace Descriptions
-********************************
-
-
-.. _col-smpte-170m:
-
-Colorspace SMPTE 170M (V4L2_COLORSPACE_SMPTE170M)
-=================================================
-
-The :ref:`smpte170m` standard defines the colorspace used by NTSC and
-PAL and by SDTV in general. The default transfer function is
-``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited
-range. The chromaticities of the primary colors and the white reference
-are:
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: SMPTE 170M Chromaticities
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Color
-      - x
-      - y
-    * - Red
-      - 0.630
-      - 0.340
-    * - Green
-      - 0.310
-      - 0.595
-    * - Blue
-      - 0.155
-      - 0.070
-    * - White Reference (D65)
-      - 0.3127
-      - 0.3290
-
-
-The red, green and blue chromaticities are also often referred to as the
-SMPTE C set, so this colorspace is sometimes called SMPTE C as well.
-
-The transfer function defined for SMPTE 170M is the same as the one
-defined in Rec. 709.
-
-.. math::
-
-    L' = -1.099(-L)^{0.45} + 0.099 \text{, for } L \le-0.018
-
-    L' = 4.5L \text{, for } -0.018 < L < 0.018
-
-    L' = 1.099L^{0.45} - 0.099 \text{, for } L \ge 0.018
-
-Inverse Transfer function:
-
-.. math::
-
-    L = -\left( \frac{L' - 0.099}{-1.099} \right) ^{\frac{1}{0.45}} \text{, for } L' \le -0.081
-
-    L = \frac{L'}{4.5} \text{, for } -0.081 < L' < 0.081
-
-    L = \left(\frac{L' + 0.099}{1.099}\right)^{\frac{1}{0.45} } \text{, for } L' \ge 0.081
-
-The luminance (Y') and color difference (Cb and Cr) are obtained with
-the following ``V4L2_YCBCR_ENC_601`` encoding:
-
-.. math::
-
-    Y' = 0.2990R' + 0.5870G' + 0.1140B'
-
-    Cb = -0.1687R' - 0.3313G' + 0.5B'
-
-    Cr = 0.5R' - 0.4187G' - 0.0813B'
-
-Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
-[-0.5…0.5]. This conversion to Y'CbCr is identical to the one defined in
-the :ref:`itu601` standard and this colorspace is sometimes called
-BT.601 as well, even though BT.601 does not mention any color primaries.
-
-The default quantization is limited range, but full range is possible
-although rarely seen.
-
-
-.. _col-rec709:
-
-Colorspace Rec. 709 (V4L2_COLORSPACE_REC709)
-============================================
-
-The :ref:`itu709` standard defines the colorspace used by HDTV in
-general. The default transfer function is ``V4L2_XFER_FUNC_709``. The
-default Y'CbCr encoding is ``V4L2_YCBCR_ENC_709``. The default Y'CbCr
-quantization is limited range. The chromaticities of the primary colors
-and the white reference are:
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: Rec. 709 Chromaticities
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Color
-      - x
-      - y
-    * - Red
-      - 0.640
-      - 0.330
-    * - Green
-      - 0.300
-      - 0.600
-    * - Blue
-      - 0.150
-      - 0.060
-    * - White Reference (D65)
-      - 0.3127
-      - 0.3290
-
-
-The full name of this standard is Rec. ITU-R BT.709-5.
-
-Transfer function. Normally L is in the range [0…1], but for the
-extended gamut xvYCC encoding values outside that range are allowed.
-
-.. math::
-
-    L' = -1.099(-L)^{0.45} + 0.099 \text{, for } L \le -0.018
-
-    L' = 4.5L \text{, for } -0.018 < L < 0.018
-
-    L' = 1.099L^{0.45} - 0.099 \text{, for } L \ge 0.018
-
-Inverse Transfer function:
-
-.. math::
-
-    L = -\left( \frac{L' - 0.099}{-1.099} \right)^\frac{1}{0.45} \text{, for } L' \le -0.081
-
-    L = \frac{L'}{4.5}\text{, for } -0.081 < L' < 0.081
-
-    L = \left(\frac{L' + 0.099}{1.099}\right)^{\frac{1}{0.45} } \text{, for } L' \ge 0.081
-
-The luminance (Y') and color difference (Cb and Cr) are obtained with
-the following ``V4L2_YCBCR_ENC_709`` encoding:
-
-.. math::
-
-    Y' = 0.2126R' + 0.7152G' + 0.0722B'
-
-    Cb = -0.1146R' - 0.3854G' + 0.5B'
-
-    Cr = 0.5R' - 0.4542G' - 0.0458B'
-
-Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
-[-0.5…0.5].
-
-The default quantization is limited range, but full range is possible
-although rarely seen.
-
-The ``V4L2_YCBCR_ENC_709`` encoding described above is the default for
-this colorspace, but it can be overridden with ``V4L2_YCBCR_ENC_601``,
-in which case the BT.601 Y'CbCr encoding is used.
-
-Two additional extended gamut Y'CbCr encodings are also possible with
-this colorspace:
-
-The xvYCC 709 encoding (``V4L2_YCBCR_ENC_XV709``, :ref:`xvycc`) is
-similar to the Rec. 709 encoding, but it allows for R', G' and B' values
-that are outside the range [0…1]. The resulting Y', Cb and Cr values are
-scaled and offset according to the limited range formula:
-
-.. math::
-
-    Y' = \frac{219}{256} * (0.2126R' + 0.7152G' + 0.0722B') + \frac{16}{256}
-
-    Cb = \frac{224}{256} * (-0.1146R' - 0.3854G' + 0.5B')
-
-    Cr = \frac{224}{256} * (0.5R' - 0.4542G' - 0.0458B')
-
-The xvYCC 601 encoding (``V4L2_YCBCR_ENC_XV601``, :ref:`xvycc`) is
-similar to the BT.601 encoding, but it allows for R', G' and B' values
-that are outside the range [0…1]. The resulting Y', Cb and Cr values are
-scaled and offset according to the limited range formula:
-
-.. math::
-
-    Y' = \frac{219}{256} * (0.2990R' + 0.5870G' + 0.1140B') + \frac{16}{256}
-
-    Cb = \frac{224}{256} * (-0.1687R' - 0.3313G' + 0.5B')
-
-    Cr = \frac{224}{256} * (0.5R' - 0.4187G' - 0.0813B')
-
-Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
-[-0.5…0.5] and quantized without further scaling or offsets.
-The non-standard xvYCC 709 or xvYCC 601 encodings can be
-used by selecting ``V4L2_YCBCR_ENC_XV709`` or ``V4L2_YCBCR_ENC_XV601``.
-As seen by the xvYCC formulas these encodings always use limited range quantization,
-there is no full range variant. The whole point of these extended gamut encodings
-is that values outside the limited range are still valid, although they
-map to R', G' and B' values outside the [0…1] range and are therefore outside
-the Rec. 709 colorspace gamut.
-
-
-.. _col-srgb:
-
-Colorspace sRGB (V4L2_COLORSPACE_SRGB)
-======================================
-
-The :ref:`srgb` standard defines the colorspace used by most webcams
-and computer graphics. The default transfer function is
-``V4L2_XFER_FUNC_SRGB``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited range.
-
-Note that the :ref:`sycc` standard specifies full range quantization,
-however all current capture hardware supported by the kernel convert
-R'G'B' to limited range Y'CbCr. So choosing full range as the default
-would break how applications interpret the quantization range.
-
-The chromaticities of the primary colors and the white reference are:
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: sRGB Chromaticities
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Color
-      - x
-      - y
-    * - Red
-      - 0.640
-      - 0.330
-    * - Green
-      - 0.300
-      - 0.600
-    * - Blue
-      - 0.150
-      - 0.060
-    * - White Reference (D65)
-      - 0.3127
-      - 0.3290
-
-
-These chromaticities are identical to the Rec. 709 colorspace.
-
-Transfer function. Note that negative values for L are only used by the
-Y'CbCr conversion.
-
-.. math::
-
-    L' = -1.055(-L)^{\frac{1}{2.4} } + 0.055\text{, for }L < -0.0031308
-
-    L' = 12.92L\text{, for }-0.0031308 \le L \le 0.0031308
-
-    L' = 1.055L ^{\frac{1}{2.4} } - 0.055\text{, for }0.0031308 < L \le 1
-
-Inverse Transfer function:
-
-.. math::
-
-    L = -((-L' + 0.055) / 1.055) ^{2.4}\text{, for }L' < -0.04045
-
-    L = L' / 12.92\text{, for }-0.04045 \le L' \le 0.04045
-
-    L = ((L' + 0.055) / 1.055) ^{2.4}\text{, for }L' > 0.04045
-
-The luminance (Y') and color difference (Cb and Cr) are obtained with
-the following ``V4L2_YCBCR_ENC_601`` encoding as defined by :ref:`sycc`:
-
-.. math::
-
-    Y' = 0.2990R' + 0.5870G' + 0.1140B'
-
-    Cb = -0.1687R' - 0.3313G' + 0.5B'
-
-    Cr = 0.5R' - 0.4187G' - 0.0813B'
-
-Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
-[-0.5…0.5]. This transform is identical to one defined in SMPTE
-170M/BT.601. The Y'CbCr quantization is limited range.
-
-
-.. _col-oprgb:
-
-Colorspace opRGB (V4L2_COLORSPACE_OPRGB)
-===============================================
-
-The :ref:`oprgb` standard defines the colorspace used by computer
-graphics that use the opRGB colorspace. The default transfer function is
-``V4L2_XFER_FUNC_OPRGB``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited
-range.
-
-Note that the :ref:`oprgb` standard specifies full range quantization,
-however all current capture hardware supported by the kernel convert
-R'G'B' to limited range Y'CbCr. So choosing full range as the default
-would break how applications interpret the quantization range.
-
-The chromaticities of the primary colors and the white reference are:
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: opRGB Chromaticities
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Color
-      - x
-      - y
-    * - Red
-      - 0.6400
-      - 0.3300
-    * - Green
-      - 0.2100
-      - 0.7100
-    * - Blue
-      - 0.1500
-      - 0.0600
-    * - White Reference (D65)
-      - 0.3127
-      - 0.3290
-
-
-
-Transfer function:
-
-.. math::
-
-    L' = L ^{\frac{1}{2.19921875}}
-
-Inverse Transfer function:
-
-.. math::
-
-    L = L'^{(2.19921875)}
-
-The luminance (Y') and color difference (Cb and Cr) are obtained with
-the following ``V4L2_YCBCR_ENC_601`` encoding:
-
-.. math::
-
-    Y' = 0.2990R' + 0.5870G' + 0.1140B'
-
-    Cb = -0.1687R' - 0.3313G' + 0.5B'
-
-    Cr = 0.5R' - 0.4187G' - 0.0813B'
-
-Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
-[-0.5…0.5]. This transform is identical to one defined in SMPTE
-170M/BT.601. The Y'CbCr quantization is limited range.
-
-
-.. _col-bt2020:
-
-Colorspace BT.2020 (V4L2_COLORSPACE_BT2020)
-===========================================
-
-The :ref:`itu2020` standard defines the colorspace used by Ultra-high
-definition television (UHDTV). The default transfer function is
-``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_BT2020``. The default R'G'B' quantization is limited
-range (!), and so is the default Y'CbCr quantization. The chromaticities
-of the primary colors and the white reference are:
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: BT.2020 Chromaticities
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Color
-      - x
-      - y
-    * - Red
-      - 0.708
-      - 0.292
-    * - Green
-      - 0.170
-      - 0.797
-    * - Blue
-      - 0.131
-      - 0.046
-    * - White Reference (D65)
-      - 0.3127
-      - 0.3290
-
-
-
-Transfer function (same as Rec. 709):
-
-.. math::
-
-    L' = 4.5L\text{, for }0 \le L < 0.018
-
-    L' = 1.099L ^{0.45} - 0.099\text{, for } 0.018 \le L \le 1
-
-Inverse Transfer function:
-
-.. math::
-
-    L = L' / 4.5\text{, for } L' < 0.081
-
-    L = \left( \frac{L' + 0.099}{1.099}\right) ^{\frac{1}{0.45} }\text{, for } L' \ge 0.081
-
-Please note that while Rec. 709 is defined as the default transfer function
-by the :ref:`itu2020` standard, in practice this colorspace is often used
-with the :ref:`xf-smpte-2084`. In particular Ultra HD Blu-ray discs use
-this combination.
-
-The luminance (Y') and color difference (Cb and Cr) are obtained with
-the following ``V4L2_YCBCR_ENC_BT2020`` encoding:
-
-.. math::
-
-    Y' = 0.2627R' + 0.6780G' + 0.0593B'
-
-    Cb = -0.1396R' - 0.3604G' + 0.5B'
-
-    Cr = 0.5R' - 0.4598G' - 0.0402B'
-
-Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
-[-0.5…0.5]. The Y'CbCr quantization is limited range.
-
-There is also an alternate constant luminance R'G'B' to Yc'CbcCrc
-(``V4L2_YCBCR_ENC_BT2020_CONST_LUM``) encoding:
-
-Luma:
-
-.. math::
-    :nowrap:
-
-    \begin{align*}
-    Yc' = (0.2627R + 0.6780G + 0.0593B)'& \\
-    B' - Yc' \le 0:& \\
-        &Cbc = (B' - Yc') / 1.9404 \\
-    B' - Yc' > 0: & \\
-        &Cbc = (B' - Yc') / 1.5816 \\
-    R' - Yc' \le 0:& \\
-        &Crc = (R' - Y') / 1.7184 \\
-    R' - Yc' > 0:& \\
-        &Crc = (R' - Y') / 0.9936
-    \end{align*}
-
-Yc' is clamped to the range [0…1] and Cbc and Crc are clamped to the
-range [-0.5…0.5]. The Yc'CbcCrc quantization is limited range.
-
-
-.. _col-dcip3:
-
-Colorspace DCI-P3 (V4L2_COLORSPACE_DCI_P3)
-==========================================
-
-The :ref:`smpte431` standard defines the colorspace used by cinema
-projectors that use the DCI-P3 colorspace. The default transfer function
-is ``V4L2_XFER_FUNC_DCI_P3``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_709``. The default Y'CbCr quantization is limited range.
-
-.. note::
-
-   Note that this colorspace standard does not specify a
-   Y'CbCr encoding since it is not meant to be encoded to Y'CbCr. So this
-   default Y'CbCr encoding was picked because it is the HDTV encoding.
-
-The chromaticities of the primary colors and the white reference are:
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: DCI-P3 Chromaticities
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Color
-      - x
-      - y
-    * - Red
-      - 0.6800
-      - 0.3200
-    * - Green
-      - 0.2650
-      - 0.6900
-    * - Blue
-      - 0.1500
-      - 0.0600
-    * - White Reference
-      - 0.3140
-      - 0.3510
-
-
-
-Transfer function:
-
-.. math::
-
-    L' = L^{\frac{1}{2.6}}
-
-Inverse Transfer function:
-
-.. math::
-
-    L = L'^{(2.6)}
-
-Y'CbCr encoding is not specified. V4L2 defaults to Rec. 709.
-
-
-.. _col-smpte-240m:
-
-Colorspace SMPTE 240M (V4L2_COLORSPACE_SMPTE240M)
-=================================================
-
-The :ref:`smpte240m` standard was an interim standard used during the
-early days of HDTV (1988-1998). It has been superseded by Rec. 709. The
-default transfer function is ``V4L2_XFER_FUNC_SMPTE240M``. The default
-Y'CbCr encoding is ``V4L2_YCBCR_ENC_SMPTE240M``. The default Y'CbCr
-quantization is limited range. The chromaticities of the primary colors
-and the white reference are:
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: SMPTE 240M Chromaticities
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Color
-      - x
-      - y
-    * - Red
-      - 0.630
-      - 0.340
-    * - Green
-      - 0.310
-      - 0.595
-    * - Blue
-      - 0.155
-      - 0.070
-    * - White Reference (D65)
-      - 0.3127
-      - 0.3290
-
-
-These chromaticities are identical to the SMPTE 170M colorspace.
-
-Transfer function:
-
-.. math::
-
-    L' = 4L\text{, for } 0 \le L < 0.0228
-
-    L' = 1.1115L ^{0.45} - 0.1115\text{, for } 0.0228 \le L \le 1
-
-Inverse Transfer function:
-
-.. math::
-
-    L = \frac{L'}{4}\text{, for } 0 \le L' < 0.0913
-
-    L = \left( \frac{L' + 0.1115}{1.1115}\right) ^{\frac{1}{0.45} }\text{, for } L' \ge 0.0913
-
-The luminance (Y') and color difference (Cb and Cr) are obtained with
-the following ``V4L2_YCBCR_ENC_SMPTE240M`` encoding:
-
-.. math::
-
-    Y' = 0.2122R' + 0.7013G' + 0.0865B'
-
-    Cb = -0.1161R' - 0.3839G' + 0.5B'
-
-    Cr = 0.5R' - 0.4451G' - 0.0549B'
-
-Y' is clamped to the range [0…1] and Cb and Cr are clamped to the
-range [-0.5…0.5]. The Y'CbCr quantization is limited range.
-
-
-.. _col-sysm:
-
-Colorspace NTSC 1953 (V4L2_COLORSPACE_470_SYSTEM_M)
-===================================================
-
-This standard defines the colorspace used by NTSC in 1953. In practice
-this colorspace is obsolete and SMPTE 170M should be used instead. The
-default transfer function is ``V4L2_XFER_FUNC_709``. The default Y'CbCr
-encoding is ``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is
-limited range. The chromaticities of the primary colors and the white
-reference are:
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: NTSC 1953 Chromaticities
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Color
-      - x
-      - y
-    * - Red
-      - 0.67
-      - 0.33
-    * - Green
-      - 0.21
-      - 0.71
-    * - Blue
-      - 0.14
-      - 0.08
-    * - White Reference (C)
-      - 0.310
-      - 0.316
-
-
-.. note::
-
-   This colorspace uses Illuminant C instead of D65 as the white
-   reference. To correctly convert an image in this colorspace to another
-   that uses D65 you need to apply a chromatic adaptation algorithm such as
-   the Bradford method.
-
-The transfer function was never properly defined for NTSC 1953. The Rec.
-709 transfer function is recommended in the literature:
-
-.. math::
-
-    L' = 4.5L\text{, for } 0 \le L < 0.018
-
-    L' = 1.099L ^{0.45} - 0.099\text{, for } 0.018 \le L \le 1
-
-Inverse Transfer function:
-
-.. math::
-
-    L = \frac{L'}{4.5} \text{, for } L' < 0.081
-
-    L = \left( \frac{L' + 0.099}{1.099}\right) ^{\frac{1}{0.45} }\text{, for } L' \ge 0.081
-
-The luminance (Y') and color difference (Cb and Cr) are obtained with
-the following ``V4L2_YCBCR_ENC_601`` encoding:
-
-.. math::
-
-    Y' = 0.2990R' + 0.5870G' + 0.1140B'
-
-    Cb = -0.1687R' - 0.3313G' + 0.5B'
-
-    Cr = 0.5R' - 0.4187G' - 0.0813B'
-
-Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
-[-0.5…0.5]. The Y'CbCr quantization is limited range. This transform is
-identical to one defined in SMPTE 170M/BT.601.
-
-
-.. _col-sysbg:
-
-Colorspace EBU Tech. 3213 (V4L2_COLORSPACE_470_SYSTEM_BG)
-=========================================================
-
-The :ref:`tech3213` standard defines the colorspace used by PAL/SECAM
-in 1975. In practice this colorspace is obsolete and SMPTE 170M should
-be used instead. The default transfer function is
-``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited
-range. The chromaticities of the primary colors and the white reference
-are:
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: EBU Tech. 3213 Chromaticities
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Color
-      - x
-      - y
-    * - Red
-      - 0.64
-      - 0.33
-    * - Green
-      - 0.29
-      - 0.60
-    * - Blue
-      - 0.15
-      - 0.06
-    * - White Reference (D65)
-      - 0.3127
-      - 0.3290
-
-
-
-The transfer function was never properly defined for this colorspace.
-The Rec. 709 transfer function is recommended in the literature:
-
-.. math::
-
-    L' = 4.5L\text{, for } 0 \le L < 0.018
-
-    L' = 1.099L ^{0.45} - 0.099\text{, for } 0.018 \le L \le 1
-
-Inverse Transfer function:
-
-.. math::
-
-    L = \frac{L'}{4.5} \text{, for } L' < 0.081
-
-    L = \left(\frac{L' + 0.099}{1.099} \right) ^{\frac{1}{0.45} }\text{, for } L' \ge 0.081
-
-The luminance (Y') and color difference (Cb and Cr) are obtained with
-the following ``V4L2_YCBCR_ENC_601`` encoding:
-
-.. math::
-
-    Y' = 0.2990R' + 0.5870G' + 0.1140B'
-
-    Cb = -0.1687R' - 0.3313G' + 0.5B'
-
-    Cr = 0.5R' - 0.4187G' - 0.0813B'
-
-Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
-[-0.5…0.5]. The Y'CbCr quantization is limited range. This transform is
-identical to one defined in SMPTE 170M/BT.601.
-
-
-.. _col-jpeg:
-
-Colorspace JPEG (V4L2_COLORSPACE_JPEG)
-======================================
-
-This colorspace defines the colorspace used by most (Motion-)JPEG
-formats. The chromaticities of the primary colors and the white
-reference are identical to sRGB. The transfer function use is
-``V4L2_XFER_FUNC_SRGB``. The Y'CbCr encoding is ``V4L2_YCBCR_ENC_601``
-with full range quantization where Y' is scaled to [0…255] and Cb/Cr are
-scaled to [-128…128] and then clipped to [-128…127].
-
-.. note::
-
-   The JPEG standard does not actually store colorspace
-   information. So if something other than sRGB is used, then the driver
-   will have to set that information explicitly. Effectively
-   ``V4L2_COLORSPACE_JPEG`` can be considered to be an abbreviation for
-   ``V4L2_COLORSPACE_SRGB``, ``V4L2_YCBCR_ENC_601`` and
-   ``V4L2_QUANTIZATION_FULL_RANGE``.
-
-***************************************
-Detailed Transfer Function Descriptions
-***************************************
-
-.. _xf-smpte-2084:
-
-Transfer Function SMPTE 2084 (V4L2_XFER_FUNC_SMPTE2084)
-=======================================================
-
-The :ref:`smpte2084` standard defines the transfer function used by
-High Dynamic Range content.
-
-Constants:
-    m1 = (2610 / 4096) / 4
-
-    m2 = (2523 / 4096) * 128
-
-    c1 = 3424 / 4096
-
-    c2 = (2413 / 4096) * 32
-
-    c3 = (2392 / 4096) * 32
-
-Transfer function:
-    L' = ((c1 + c2 * L\ :sup:`m1`) / (1 + c3 * L\ :sup:`m1`))\ :sup:`m2`
-
-Inverse Transfer function:
-    L = (max(L':sup:`1/m2` - c1, 0) / (c2 - c3 *
-    L'\ :sup:`1/m2`))\ :sup:`1/m1`
-
-Take care when converting between this transfer function and non-HDR transfer
-functions: the linear RGB values [0…1] of HDR content map to a luminance range
-of 0 to 10000 cd/m\ :sup:`2` whereas the linear RGB values of non-HDR (aka
-Standard Dynamic Range or SDR) map to a luminance range of 0 to 100 cd/m\ :sup:`2`.
-
-To go from SDR to HDR you will have to divide L by 100 first. To go in the other
-direction you will have to multiply L by 100. Of course, this clamps all
-luminance values over 100 cd/m\ :sup:`2` to 100 cd/m\ :sup:`2`.
-
-There are better methods, see e.g. :ref:`colimg` for more in-depth information
-about this.
diff --git a/Documentation/media/uapi/v4l/colorspaces.rst b/Documentation/media/uapi/v4l/colorspaces.rst
deleted file mode 100644
index 4f6c82fa057f..000000000000
--- a/Documentation/media/uapi/v4l/colorspaces.rst
+++ /dev/null
@@ -1,170 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _colorspaces:
-
-***********
-Colorspaces
-***********
-
-'Color' is a very complex concept and depends on physics, chemistry and
-biology. Just because you have three numbers that describe the 'red',
-'green' and 'blue' components of the color of a pixel does not mean that
-you can accurately display that color. A colorspace defines what it
-actually *means* to have an RGB value of e.g. (255, 0, 0). That is,
-which color should be reproduced on the screen in a perfectly calibrated
-environment.
-
-In order to do that we first need to have a good definition of color,
-i.e. some way to uniquely and unambiguously define a color so that
-someone else can reproduce it. Human color vision is trichromatic since
-the human eye has color receptors that are sensitive to three different
-wavelengths of light. Hence the need to use three numbers to describe
-color. Be glad you are not a mantis shrimp as those are sensitive to 12
-different wavelengths, so instead of RGB we would be using the
-ABCDEFGHIJKL colorspace...
-
-Color exists only in the eye and brain and is the result of how strongly
-color receptors are stimulated. This is based on the Spectral Power
-Distribution (SPD) which is a graph showing the intensity (radiant
-power) of the light at wavelengths covering the visible spectrum as it
-enters the eye. The science of colorimetry is about the relationship
-between the SPD and color as perceived by the human brain.
-
-Since the human eye has only three color receptors it is perfectly
-possible that different SPDs will result in the same stimulation of
-those receptors and are perceived as the same color, even though the SPD
-of the light is different.
-
-In the 1920s experiments were devised to determine the relationship
-between SPDs and the perceived color and that resulted in the CIE 1931
-standard that defines spectral weighting functions that model the
-perception of color. Specifically that standard defines functions that
-can take an SPD and calculate the stimulus for each color receptor.
-After some further mathematical transforms these stimuli are known as
-the *CIE XYZ tristimulus* values and these X, Y and Z values describe a
-color as perceived by a human unambiguously. These X, Y and Z values are
-all in the range [0…1].
-
-The Y value in the CIE XYZ colorspace corresponds to luminance. Often
-the CIE XYZ colorspace is transformed to the normalized CIE xyY
-colorspace:
-
-	x = X / (X + Y + Z)
-
-	y = Y / (X + Y + Z)
-
-The x and y values are the chromaticity coordinates and can be used to
-define a color without the luminance component Y. It is very confusing
-to have such similar names for these colorspaces. Just be aware that if
-colors are specified with lower case 'x' and 'y', then the CIE xyY
-colorspace is used. Upper case 'X' and 'Y' refer to the CIE XYZ
-colorspace. Also, y has nothing to do with luminance. Together x and y
-specify a color, and Y the luminance. That is really all you need to
-remember from a practical point of view. At the end of this section you
-will find reading resources that go into much more detail if you are
-interested.
-
-A monitor or TV will reproduce colors by emitting light at three
-different wavelengths, the combination of which will stimulate the color
-receptors in the eye and thus cause the perception of color.
-Historically these wavelengths were defined by the red, green and blue
-phosphors used in the displays. These *color primaries* are part of what
-defines a colorspace.
-
-Different display devices will have different primaries and some
-primaries are more suitable for some display technologies than others.
-This has resulted in a variety of colorspaces that are used for
-different display technologies or uses. To define a colorspace you need
-to define the three color primaries (these are typically defined as x, y
-chromaticity coordinates from the CIE xyY colorspace) but also the white
-reference: that is the color obtained when all three primaries are at
-maximum power. This determines the relative power or energy of the
-primaries. This is usually chosen to be close to daylight which has been
-defined as the CIE D65 Illuminant.
-
-To recapitulate: the CIE XYZ colorspace uniquely identifies colors.
-Other colorspaces are defined by three chromaticity coordinates defined
-in the CIE xyY colorspace. Based on those a 3x3 matrix can be
-constructed that transforms CIE XYZ colors to colors in the new
-colorspace.
-
-Both the CIE XYZ and the RGB colorspace that are derived from the
-specific chromaticity primaries are linear colorspaces. But neither the
-eye, nor display technology is linear. Doubling the values of all
-components in the linear colorspace will not be perceived as twice the
-intensity of the color. So each colorspace also defines a transfer
-function that takes a linear color component value and transforms it to
-the non-linear component value, which is a closer match to the
-non-linear performance of both the eye and displays. Linear component
-values are denoted RGB, non-linear are denoted as R'G'B'. In general
-colors used in graphics are all R'G'B', except in openGL which uses
-linear RGB. Special care should be taken when dealing with openGL to
-provide linear RGB colors or to use the built-in openGL support to apply
-the inverse transfer function.
-
-The final piece that defines a colorspace is a function that transforms
-non-linear R'G'B' to non-linear Y'CbCr. This function is determined by
-the so-called luma coefficients. There may be multiple possible Y'CbCr
-encodings allowed for the same colorspace. Many encodings of color
-prefer to use luma (Y') and chroma (CbCr) instead of R'G'B'. Since the
-human eye is more sensitive to differences in luminance than in color
-this encoding allows one to reduce the amount of color information
-compared to the luma data. Note that the luma (Y') is unrelated to the Y
-in the CIE XYZ colorspace. Also note that Y'CbCr is often called YCbCr
-or YUV even though these are strictly speaking wrong.
-
-Sometimes people confuse Y'CbCr as being a colorspace. This is not
-correct, it is just an encoding of an R'G'B' color into luma and chroma
-values. The underlying colorspace that is associated with the R'G'B'
-color is also associated with the Y'CbCr color.
-
-The final step is how the RGB, R'G'B' or Y'CbCr values are quantized.
-The CIE XYZ colorspace where X, Y and Z are in the range [0…1] describes
-all colors that humans can perceive, but the transform to another
-colorspace will produce colors that are outside the [0…1] range. Once
-clamped to the [0…1] range those colors can no longer be reproduced in
-that colorspace. This clamping is what reduces the extent or gamut of
-the colorspace. How the range of [0…1] is translated to integer values
-in the range of [0…255] (or higher, depending on the color depth) is
-called the quantization. This is *not* part of the colorspace
-definition. In practice RGB or R'G'B' values are full range, i.e. they
-use the full [0…255] range. Y'CbCr values on the other hand are limited
-range with Y' using [16…235] and Cb and Cr using [16…240].
-
-Unfortunately, in some cases limited range RGB is also used where the
-components use the range [16…235]. And full range Y'CbCr also exists
-using the [0…255] range.
-
-In order to correctly interpret a color you need to know the
-quantization range, whether it is R'G'B' or Y'CbCr, the used Y'CbCr
-encoding and the colorspace. From that information you can calculate the
-corresponding CIE XYZ color and map that again to whatever colorspace
-your display device uses.
-
-The colorspace definition itself consists of the three chromaticity
-primaries, the white reference chromaticity, a transfer function and the
-luma coefficients needed to transform R'G'B' to Y'CbCr. While some
-colorspace standards correctly define all four, quite often the
-colorspace standard only defines some, and you have to rely on other
-standards for the missing pieces. The fact that colorspaces are often a
-mix of different standards also led to very confusing naming conventions
-where the name of a standard was used to name a colorspace when in fact
-that standard was part of various other colorspaces as well.
-
-If you want to read more about colors and colorspaces, then the
-following resources are useful: :ref:`poynton` is a good practical
-book for video engineers, :ref:`colimg` has a much broader scope and
-describes many more aspects of color (physics, chemistry, biology,
-etc.). The
-`http://www.brucelindbloom.com <http://www.brucelindbloom.com>`__
-website is an excellent resource, especially with respect to the
-mathematics behind colorspace conversions. The wikipedia
-`CIE 1931 colorspace <http://en.wikipedia.org/wiki/CIE_1931_color_space#CIE_xy_chromaticity_diagram_and_the_CIE_xyY_color_space>`__
-article is also very useful.
diff --git a/Documentation/media/uapi/v4l/common-defs.rst b/Documentation/media/uapi/v4l/common-defs.rst
deleted file mode 100644
index 504c6c93c9b0..000000000000
--- a/Documentation/media/uapi/v4l/common-defs.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _common-defs:
-
-******************************************************
-Common definitions for V4L2 and V4L2 subdev interfaces
-******************************************************
-
-
-.. toctree::
-    :maxdepth: 1
-
-    selections-common
diff --git a/Documentation/media/uapi/v4l/common.rst b/Documentation/media/uapi/v4l/common.rst
deleted file mode 100644
index 5e87ae24e4b4..000000000000
--- a/Documentation/media/uapi/v4l/common.rst
+++ /dev/null
@@ -1,64 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _common:
-
-###################
-Common API Elements
-###################
-Programming a V4L2 device consists of these steps:
-
--  Opening the device
-
--  Changing device properties, selecting a video and audio input, video
-   standard, picture brightness a. o.
-
--  Negotiating a data format
-
--  Negotiating an input/output method
-
--  The actual input/output loop
-
--  Closing the device
-
-In practice most steps are optional and can be executed out of order. It
-depends on the V4L2 device type, you can read about the details in
-:ref:`devices`. In this chapter we will discuss the basic concepts
-applicable to all devices.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    open
-    querycap
-    app-pri
-    video
-    audio
-    tuner
-    standard
-    dv-timings
-    control
-    extended-controls
-    ext-ctrls-camera
-    ext-ctrls-flash
-    ext-ctrls-image-source
-    ext-ctrls-image-process
-    ext-ctrls-codec
-    ext-ctrls-jpeg
-    ext-ctrls-dv
-    ext-ctrls-rf-tuner
-    ext-ctrls-fm-tx
-    ext-ctrls-fm-rx
-    ext-ctrls-detect
-    format
-    planar-apis
-    selection-api
-    crop
-    streaming-par
diff --git a/Documentation/media/uapi/v4l/compat.rst b/Documentation/media/uapi/v4l/compat.rst
deleted file mode 100644
index f35575a300b4..000000000000
--- a/Documentation/media/uapi/v4l/compat.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _compat:
-
-*******
-Changes
-*******
-
-The following chapters document the evolution of the V4L2 API, errata or
-extensions. They are also intended to help application and driver
-writers to port or update their code.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    diff-v4l
-    hist-v4l2
diff --git a/Documentation/media/uapi/v4l/constraints.svg b/Documentation/media/uapi/v4l/constraints.svg
deleted file mode 100644
index 08f9f8b0985e..000000000000
--- a/Documentation/media/uapi/v4l/constraints.svg
+++ /dev/null
@@ -1,37 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-    This file is dual-licensed: you can use it either under the terms
-    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-    dual licensing only applies to this file, and not this project as a
-    whole.
-
-    a) This file is free software; you can redistribute it and/or
-       modify it under the terms of the GNU General Public License as
-       published by the Free Software Foundation version 2 of
-       the License.
-
-       This file is distributed in the hope that it will be useful,
-       but WITHOUT ANY WARRANTY; without even the implied warranty of
-       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-       GNU General Public License for more details.
-
-    Or, alternatively,
-
-    b) Permission is granted to copy, distribute and/or modify this
-       document under the terms of the GNU Free Documentation License,
-       Version 1.1 or any later version published by the Free Software
-       Foundation, with no Invariant Sections, no Front-Cover Texts
-       and no Back-Cover Texts. A copy of the license is included at
-       Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg id="svg2" width="249.01mm" height="143.01mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 24900.998 14300.999" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata325"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4" class="ClipPathGroup"><marker id="marker6261" overflow="visible" orient="auto"><path id="path6263" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6125" overflow="visible"
-orient="auto"><path id="path6127" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6001" overflow="visible" orient="auto"><path id="path6003" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5693" overflow="visible" orient="auto"><path id="path5695" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5575" overflow="visible" orient="auto"><path id="path5577" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5469" overflow="visible"
-orient="auto"><path id="path5471" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5259" overflow="visible" orient="auto"><path id="path5261" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="Arrow2Mend" overflow="visible" orient="auto"><path id="path4241" transform="scale(-.6)" d="m8.7186 4.0337-10.926-4.0177 10.926-4.0177c-1.7455 2.3721-1.7354 5.6175-6e-7 8.0354z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-linejoin="round" stroke-width=".625"/></marker></defs><g id="g204" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id6"><rect id="rect207" class="BoundingBox" x="1350" y="3250" width="24901" height="14301"
-fill="none"/><path id="path209" d="m13800 17500h-12400v-14200h24800v14200h-12400z" fill="#fff"/><path id="path211" d="m13800 17500h-12400v-14200h24800v14200h-12400z" fill="none" stroke="#f00" stroke-linejoin="round" stroke-width="100"/><text id="text213" class="TextShape"><tspan id="tspan215" class="TextParagraph" font-family="sans-serif" font-size="846px" font-weight="400"><tspan id="tspan217" class="TextPosition" x="1652" y="17093" fill="#ff0000"><tspan id="tspan219"/><tspan id="tspan221">V4L2_SEL_FLAG_GE</tspan></tspan></tspan></text>
-</g></g><rect id="rect226" class="BoundingBox" x="3e3" y="2200" width="18101" height="10101" fill="none"/><path id="path228" d="m12050 12250h-9e3v-1e4h18000v1e4h-9e3z" fill="#fff"/><path id="path230" d="m12050 12250h-9e3v-1e4h18000v1e4h-9e3z" fill="none" stroke="#000" stroke-linejoin="round" stroke-width="100"/><text id="text232" class="TextShape" x="-1350" y="-3250"><tspan id="tspan234" class="TextParagraph" font-family="sans-serif" font-size="987px" font-weight="400"><tspan id="tspan236" class="TextPosition" x="3227" y="11503" fill="#000000"><tspan id="tspan238"/><tspan id="tspan240">ORIGINAL</tspan></tspan></tspan></text>
-<g id="g242" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id8"><rect id="rect245" class="BoundingBox" x="7050" y="7950" width="7901" height="5501" fill="none"/><path id="path247" d="m11000 13400h-3900v-5400h7800v5400h-3900z" fill="#fff"/><path id="path249" d="m11000 13400h-3900v-5400h7800v5400h-3900z" fill="none" stroke="#3465a4" stroke-linejoin="round" stroke-width="100"/><text id="text251" class="TextShape"><tspan id="tspan253" class="TextParagraph" font-family="sans-serif" font-size="776px" font-weight="400"><tspan id="tspan255" class="TextPosition" x="7228" y="10969"><tspan id="tspan257" fill="#000080">V4L2_SEL_FLAG_LE</tspan></tspan></tspan></text>
-</g></g><rect id="rect262" class="BoundingBox" x="13700" y="7100" width="7101" height="101" fill="none"/><path id="path264" d="m20750 7150h-7e3" fill="none" marker-end="url(#Arrow2Mend)" stroke="#000080" stroke-linejoin="round" stroke-width="99.991"/><rect id="rect269" class="BoundingBox" x="3400" y="7100" width="2101" height="101" fill="none"/><path id="path271" d="m3450 7150h2e3" fill="none" marker-end="url(#marker5575)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect276" class="BoundingBox" x="9800" y="2900" width="101" height="1501" fill="none"/><path id="path278" d="m9850 2950v1400" fill="none" marker-end="url(#marker5259)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect283" class="BoundingBox" x="9600" y="10600" width="101" height="1301" fill="none"/><path id="path285" d="m9650 11850v-1200" fill="none"
-marker-end="url(#marker5469)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect290" class="BoundingBox" x="450" y="6850" width="2051" height="601" fill="none"/><path id="path292" d="m2450 7150h-2000.9" fill="none" marker-end="url(#marker6125)" stroke="#f00" stroke-linejoin="round" stroke-width="132.48"/><rect id="rect299" class="BoundingBox" x="21600" y="6750" width="2651" height="601" fill="none"/><path id="path301" d="m21650 7050h2522.6" fill="none" marker-end="url(#marker6001)" stroke="#f00" stroke-linejoin="round" stroke-width="120.41"/><rect id="rect308" class="BoundingBox" x="9550" y="550" width="601" height="1451" fill="none"/><path id="path310" d="m9837 1950v-1453" fill="none" marker-end="url(#marker6261)" stroke="#f00" stroke-linejoin="round" stroke-width="164.04"/><rect id="rect317" class="BoundingBox" x="9350" y="12500" width="601" height="1451"
-fill="none"/><path id="path319" d="m9650 12550v1505.2" fill="none" marker-end="url(#marker5693)" stroke="#f00" stroke-linejoin="round" stroke-width="166.96"/></svg>
diff --git a/Documentation/media/uapi/v4l/control.rst b/Documentation/media/uapi/v4l/control.rst
deleted file mode 100644
index ef62e088ff7a..000000000000
--- a/Documentation/media/uapi/v4l/control.rst
+++ /dev/null
@@ -1,512 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _control:
-
-*************
-User Controls
-*************
-
-Devices typically have a number of user-settable controls such as
-brightness, saturation and so on, which would be presented to the user
-on a graphical user interface. But, different devices will have
-different controls available, and furthermore, the range of possible
-values, and the default value will vary from device to device. The
-control ioctls provide the information and a mechanism to create a nice
-user interface for these controls that will work correctly with any
-device.
-
-All controls are accessed using an ID value. V4L2 defines several IDs
-for specific purposes. Drivers can also implement their own custom
-controls using ``V4L2_CID_PRIVATE_BASE``  [#f1]_ and higher values. The
-pre-defined control IDs have the prefix ``V4L2_CID_``, and are listed in
-:ref:`control-id`. The ID is used when querying the attributes of a
-control, and when getting or setting the current value.
-
-Generally applications should present controls to the user without
-assumptions about their purpose. Each control comes with a name string
-the user is supposed to understand. When the purpose is non-intuitive
-the driver writer should provide a user manual, a user interface plug-in
-or a driver specific panel application. Predefined IDs were introduced
-to change a few controls programmatically, for example to mute a device
-during a channel switch.
-
-Drivers may enumerate different controls after switching the current
-video input or output, tuner or modulator, or audio input or output.
-Different in the sense of other bounds, another default and current
-value, step size or other menu items. A control with a certain *custom*
-ID can also change name and type.
-
-If a control is not applicable to the current configuration of the
-device (for example, it doesn't apply to the current video input)
-drivers set the ``V4L2_CTRL_FLAG_INACTIVE`` flag.
-
-Control values are stored globally, they do not change when switching
-except to stay within the reported bounds. They also do not change e. g.
-when the device is opened or closed, when the tuner radio frequency is
-changed or generally never without application request.
-
-V4L2 specifies an event mechanism to notify applications when controls
-change value (see
-:ref:`VIDIOC_SUBSCRIBE_EVENT`, event
-``V4L2_EVENT_CTRL``), panel applications might want to make use of that
-in order to always reflect the correct control value.
-
-All controls use machine endianness.
-
-
-.. _control-id:
-
-Control IDs
-===========
-
-``V4L2_CID_BASE``
-    First predefined ID, equal to ``V4L2_CID_BRIGHTNESS``.
-
-``V4L2_CID_USER_BASE``
-    Synonym of ``V4L2_CID_BASE``.
-
-``V4L2_CID_BRIGHTNESS`` ``(integer)``
-    Picture brightness, or more precisely, the black level.
-
-``V4L2_CID_CONTRAST`` ``(integer)``
-    Picture contrast or luma gain.
-
-``V4L2_CID_SATURATION`` ``(integer)``
-    Picture color saturation or chroma gain.
-
-``V4L2_CID_HUE`` ``(integer)``
-    Hue or color balance.
-
-``V4L2_CID_AUDIO_VOLUME`` ``(integer)``
-    Overall audio volume. Note some drivers also provide an OSS or ALSA
-    mixer interface.
-
-``V4L2_CID_AUDIO_BALANCE`` ``(integer)``
-    Audio stereo balance. Minimum corresponds to all the way left,
-    maximum to right.
-
-``V4L2_CID_AUDIO_BASS`` ``(integer)``
-    Audio bass adjustment.
-
-``V4L2_CID_AUDIO_TREBLE`` ``(integer)``
-    Audio treble adjustment.
-
-``V4L2_CID_AUDIO_MUTE`` ``(boolean)``
-    Mute audio, i. e. set the volume to zero, however without affecting
-    ``V4L2_CID_AUDIO_VOLUME``. Like ALSA drivers, V4L2 drivers must mute
-    at load time to avoid excessive noise. Actually the entire device
-    should be reset to a low power consumption state.
-
-``V4L2_CID_AUDIO_LOUDNESS`` ``(boolean)``
-    Loudness mode (bass boost).
-
-``V4L2_CID_BLACK_LEVEL`` ``(integer)``
-    Another name for brightness (not a synonym of
-    ``V4L2_CID_BRIGHTNESS``). This control is deprecated and should not
-    be used in new drivers and applications.
-
-``V4L2_CID_AUTO_WHITE_BALANCE`` ``(boolean)``
-    Automatic white balance (cameras).
-
-``V4L2_CID_DO_WHITE_BALANCE`` ``(button)``
-    This is an action control. When set (the value is ignored), the
-    device will do a white balance and then hold the current setting.
-    Contrast this with the boolean ``V4L2_CID_AUTO_WHITE_BALANCE``,
-    which, when activated, keeps adjusting the white balance.
-
-``V4L2_CID_RED_BALANCE`` ``(integer)``
-    Red chroma balance.
-
-``V4L2_CID_BLUE_BALANCE`` ``(integer)``
-    Blue chroma balance.
-
-``V4L2_CID_GAMMA`` ``(integer)``
-    Gamma adjust.
-
-``V4L2_CID_WHITENESS`` ``(integer)``
-    Whiteness for grey-scale devices. This is a synonym for
-    ``V4L2_CID_GAMMA``. This control is deprecated and should not be
-    used in new drivers and applications.
-
-``V4L2_CID_EXPOSURE`` ``(integer)``
-    Exposure (cameras). [Unit?]
-
-``V4L2_CID_AUTOGAIN`` ``(boolean)``
-    Automatic gain/exposure control.
-
-``V4L2_CID_GAIN`` ``(integer)``
-    Gain control.
-
-    Primarily used to control gain on e.g. TV tuners but also on
-    webcams. Most devices control only digital gain with this control
-    but on some this could include analogue gain as well. Devices that
-    recognise the difference between digital and analogue gain use
-    controls ``V4L2_CID_DIGITAL_GAIN`` and ``V4L2_CID_ANALOGUE_GAIN``.
-
-``V4L2_CID_HFLIP`` ``(boolean)``
-    Mirror the picture horizontally.
-
-``V4L2_CID_VFLIP`` ``(boolean)``
-    Mirror the picture vertically.
-
-.. _v4l2-power-line-frequency:
-
-``V4L2_CID_POWER_LINE_FREQUENCY`` ``(enum)``
-    Enables a power line frequency filter to avoid flicker. Possible
-    values for ``enum v4l2_power_line_frequency`` are:
-    ``V4L2_CID_POWER_LINE_FREQUENCY_DISABLED`` (0),
-    ``V4L2_CID_POWER_LINE_FREQUENCY_50HZ`` (1),
-    ``V4L2_CID_POWER_LINE_FREQUENCY_60HZ`` (2) and
-    ``V4L2_CID_POWER_LINE_FREQUENCY_AUTO`` (3).
-
-``V4L2_CID_HUE_AUTO`` ``(boolean)``
-    Enables automatic hue control by the device. The effect of setting
-    ``V4L2_CID_HUE`` while automatic hue control is enabled is
-    undefined, drivers should ignore such request.
-
-``V4L2_CID_WHITE_BALANCE_TEMPERATURE`` ``(integer)``
-    This control specifies the white balance settings as a color
-    temperature in Kelvin. A driver should have a minimum of 2800
-    (incandescent) to 6500 (daylight). For more information about color
-    temperature see
-    `Wikipedia <http://en.wikipedia.org/wiki/Color_temperature>`__.
-
-``V4L2_CID_SHARPNESS`` ``(integer)``
-    Adjusts the sharpness filters in a camera. The minimum value
-    disables the filters, higher values give a sharper picture.
-
-``V4L2_CID_BACKLIGHT_COMPENSATION`` ``(integer)``
-    Adjusts the backlight compensation in a camera. The minimum value
-    disables backlight compensation.
-
-``V4L2_CID_CHROMA_AGC`` ``(boolean)``
-    Chroma automatic gain control.
-
-``V4L2_CID_CHROMA_GAIN`` ``(integer)``
-    Adjusts the Chroma gain control (for use when chroma AGC is
-    disabled).
-
-``V4L2_CID_COLOR_KILLER`` ``(boolean)``
-    Enable the color killer (i. e. force a black & white image in case
-    of a weak video signal).
-
-.. _v4l2-colorfx:
-
-``V4L2_CID_COLORFX`` ``(enum)``
-    Selects a color effect. The following values are defined:
-
-
-
-.. tabularcolumns:: |p{5.5cm}|p{12cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 11 24
-
-    * - ``V4L2_COLORFX_NONE``
-      - Color effect is disabled.
-    * - ``V4L2_COLORFX_ANTIQUE``
-      - An aging (old photo) effect.
-    * - ``V4L2_COLORFX_ART_FREEZE``
-      - Frost color effect.
-    * - ``V4L2_COLORFX_AQUA``
-      - Water color, cool tone.
-    * - ``V4L2_COLORFX_BW``
-      - Black and white.
-    * - ``V4L2_COLORFX_EMBOSS``
-      - Emboss, the highlights and shadows replace light/dark boundaries
-	and low contrast areas are set to a gray background.
-    * - ``V4L2_COLORFX_GRASS_GREEN``
-      - Grass green.
-    * - ``V4L2_COLORFX_NEGATIVE``
-      - Negative.
-    * - ``V4L2_COLORFX_SEPIA``
-      - Sepia tone.
-    * - ``V4L2_COLORFX_SKETCH``
-      - Sketch.
-    * - ``V4L2_COLORFX_SKIN_WHITEN``
-      - Skin whiten.
-    * - ``V4L2_COLORFX_SKY_BLUE``
-      - Sky blue.
-    * - ``V4L2_COLORFX_SOLARIZATION``
-      - Solarization, the image is partially reversed in tone, only color
-	values above or below a certain threshold are inverted.
-    * - ``V4L2_COLORFX_SILHOUETTE``
-      - Silhouette (outline).
-    * - ``V4L2_COLORFX_VIVID``
-      - Vivid colors.
-    * - ``V4L2_COLORFX_SET_CBCR``
-      - The Cb and Cr chroma components are replaced by fixed coefficients
-	determined by ``V4L2_CID_COLORFX_CBCR`` control.
-
-
-
-``V4L2_CID_COLORFX_CBCR`` ``(integer)``
-    Determines the Cb and Cr coefficients for ``V4L2_COLORFX_SET_CBCR``
-    color effect. Bits [7:0] of the supplied 32 bit value are
-    interpreted as Cr component, bits [15:8] as Cb component and bits
-    [31:16] must be zero.
-
-``V4L2_CID_AUTOBRIGHTNESS`` ``(boolean)``
-    Enable Automatic Brightness.
-
-``V4L2_CID_ROTATE`` ``(integer)``
-    Rotates the image by specified angle. Common angles are 90, 270 and
-    180. Rotating the image to 90 and 270 will reverse the height and
-    width of the display window. It is necessary to set the new height
-    and width of the picture using the
-    :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl according to the
-    rotation angle selected.
-
-``V4L2_CID_BG_COLOR`` ``(integer)``
-    Sets the background color on the current output device. Background
-    color needs to be specified in the RGB24 format. The supplied 32 bit
-    value is interpreted as bits 0-7 Red color information, bits 8-15
-    Green color information, bits 16-23 Blue color information and bits
-    24-31 must be zero.
-
-``V4L2_CID_ILLUMINATORS_1 V4L2_CID_ILLUMINATORS_2`` ``(boolean)``
-    Switch on or off the illuminator 1 or 2 of the device (usually a
-    microscope).
-
-``V4L2_CID_MIN_BUFFERS_FOR_CAPTURE`` ``(integer)``
-    This is a read-only control that can be read by the application and
-    used as a hint to determine the number of CAPTURE buffers to pass to
-    REQBUFS. The value is the minimum number of CAPTURE buffers that is
-    necessary for hardware to work.
-
-``V4L2_CID_MIN_BUFFERS_FOR_OUTPUT`` ``(integer)``
-    This is a read-only control that can be read by the application and
-    used as a hint to determine the number of OUTPUT buffers to pass to
-    REQBUFS. The value is the minimum number of OUTPUT buffers that is
-    necessary for hardware to work.
-
-.. _v4l2-alpha-component:
-
-``V4L2_CID_ALPHA_COMPONENT`` ``(integer)``
-    Sets the alpha color component. When a capture device (or capture
-    queue of a mem-to-mem device) produces a frame format that includes
-    an alpha component (e.g.
-    :ref:`packed RGB image formats <pixfmt-rgb>`) and the alpha value
-    is not defined by the device or the mem-to-mem input data this
-    control lets you select the alpha component value of all pixels.
-    When an output device (or output queue of a mem-to-mem device)
-    consumes a frame format that doesn't include an alpha component and
-    the device supports alpha channel processing this control lets you
-    set the alpha component value of all pixels for further processing
-    in the device.
-
-``V4L2_CID_LASTP1``
-    End of the predefined control IDs (currently
-    ``V4L2_CID_ALPHA_COMPONENT`` + 1).
-
-``V4L2_CID_PRIVATE_BASE``
-    ID of the first custom (driver specific) control. Applications
-    depending on particular custom controls should check the driver name
-    and version, see :ref:`querycap`.
-
-Applications can enumerate the available controls with the
-:ref:`VIDIOC_QUERYCTRL` and
-:ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>` ioctls, get and set a
-control value with the :ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
-:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls. Drivers must implement
-``VIDIOC_QUERYCTRL``, ``VIDIOC_G_CTRL`` and ``VIDIOC_S_CTRL`` when the
-device has one or more controls, ``VIDIOC_QUERYMENU`` when it has one or
-more menu type controls.
-
-
-.. _enum_all_controls:
-
-Example: Enumerating all controls
-=================================
-
-.. code-block:: c
-
-    struct v4l2_queryctrl queryctrl;
-    struct v4l2_querymenu querymenu;
-
-    static void enumerate_menu(__u32 id)
-    {
-	printf("  Menu items:\\n");
-
-	memset(&querymenu, 0, sizeof(querymenu));
-	querymenu.id = id;
-
-	for (querymenu.index = queryctrl.minimum;
-	     querymenu.index <= queryctrl.maximum;
-	     querymenu.index++) {
-	    if (0 == ioctl(fd, VIDIOC_QUERYMENU, &querymenu)) {
-		printf("  %s\\n", querymenu.name);
-	    }
-	}
-    }
-
-    memset(&queryctrl, 0, sizeof(queryctrl));
-
-    queryctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL;
-    while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
-	if (!(queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)) {
-	    printf("Control %s\\n", queryctrl.name);
-
-	    if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
-	        enumerate_menu(queryctrl.id);
-        }
-
-	queryctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
-    }
-    if (errno != EINVAL) {
-	perror("VIDIOC_QUERYCTRL");
-	exit(EXIT_FAILURE);
-    }
-
-Example: Enumerating all controls including compound controls
-=============================================================
-
-.. code-block:: c
-
-    struct v4l2_query_ext_ctrl query_ext_ctrl;
-
-    memset(&query_ext_ctrl, 0, sizeof(query_ext_ctrl));
-
-    query_ext_ctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL | V4L2_CTRL_FLAG_NEXT_COMPOUND;
-    while (0 == ioctl(fd, VIDIOC_QUERY_EXT_CTRL, &query_ext_ctrl)) {
-	if (!(query_ext_ctrl.flags & V4L2_CTRL_FLAG_DISABLED)) {
-	    printf("Control %s\\n", query_ext_ctrl.name);
-
-	    if (query_ext_ctrl.type == V4L2_CTRL_TYPE_MENU)
-	        enumerate_menu(query_ext_ctrl.id);
-        }
-
-	query_ext_ctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL | V4L2_CTRL_FLAG_NEXT_COMPOUND;
-    }
-    if (errno != EINVAL) {
-	perror("VIDIOC_QUERY_EXT_CTRL");
-	exit(EXIT_FAILURE);
-    }
-
-Example: Enumerating all user controls (old style)
-==================================================
-
-.. code-block:: c
-
-
-    memset(&queryctrl, 0, sizeof(queryctrl));
-
-    for (queryctrl.id = V4L2_CID_BASE;
-	 queryctrl.id < V4L2_CID_LASTP1;
-	 queryctrl.id++) {
-	if (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
-	    if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)
-		continue;
-
-	    printf("Control %s\\n", queryctrl.name);
-
-	    if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
-		enumerate_menu(queryctrl.id);
-	} else {
-	    if (errno == EINVAL)
-		continue;
-
-	    perror("VIDIOC_QUERYCTRL");
-	    exit(EXIT_FAILURE);
-	}
-    }
-
-    for (queryctrl.id = V4L2_CID_PRIVATE_BASE;;
-	 queryctrl.id++) {
-	if (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
-	    if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)
-		continue;
-
-	    printf("Control %s\\n", queryctrl.name);
-
-	    if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
-		enumerate_menu(queryctrl.id);
-	} else {
-	    if (errno == EINVAL)
-		break;
-
-	    perror("VIDIOC_QUERYCTRL");
-	    exit(EXIT_FAILURE);
-	}
-    }
-
-
-Example: Changing controls
-==========================
-
-.. code-block:: c
-
-    struct v4l2_queryctrl queryctrl;
-    struct v4l2_control control;
-
-    memset(&queryctrl, 0, sizeof(queryctrl));
-    queryctrl.id = V4L2_CID_BRIGHTNESS;
-
-    if (-1 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
-	if (errno != EINVAL) {
-	    perror("VIDIOC_QUERYCTRL");
-	    exit(EXIT_FAILURE);
-	} else {
-	    printf("V4L2_CID_BRIGHTNESS is not supportedn");
-	}
-    } else if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) {
-	printf("V4L2_CID_BRIGHTNESS is not supportedn");
-    } else {
-	memset(&control, 0, sizeof (control));
-	control.id = V4L2_CID_BRIGHTNESS;
-	control.value = queryctrl.default_value;
-
-	if (-1 == ioctl(fd, VIDIOC_S_CTRL, &control)) {
-	    perror("VIDIOC_S_CTRL");
-	    exit(EXIT_FAILURE);
-	}
-    }
-
-    memset(&control, 0, sizeof(control));
-    control.id = V4L2_CID_CONTRAST;
-
-    if (0 == ioctl(fd, VIDIOC_G_CTRL, &control)) {
-	control.value += 1;
-
-	/* The driver may clamp the value or return ERANGE, ignored here */
-
-	if (-1 == ioctl(fd, VIDIOC_S_CTRL, &control)
-	    && errno != ERANGE) {
-	    perror("VIDIOC_S_CTRL");
-	    exit(EXIT_FAILURE);
-	}
-    /* Ignore if V4L2_CID_CONTRAST is unsupported */
-    } else if (errno != EINVAL) {
-	perror("VIDIOC_G_CTRL");
-	exit(EXIT_FAILURE);
-    }
-
-    control.id = V4L2_CID_AUDIO_MUTE;
-    control.value = 1; /* silence */
-
-    /* Errors ignored */
-    ioctl(fd, VIDIOC_S_CTRL, &control);
-
-.. [#f1]
-   The use of ``V4L2_CID_PRIVATE_BASE`` is problematic because different
-   drivers may use the same ``V4L2_CID_PRIVATE_BASE`` ID for different
-   controls. This makes it hard to programmatically set such controls
-   since the meaning of the control with that ID is driver dependent. In
-   order to resolve this drivers use unique IDs and the
-   ``V4L2_CID_PRIVATE_BASE`` IDs are mapped to those unique IDs by the
-   kernel. Consider these ``V4L2_CID_PRIVATE_BASE`` IDs as aliases to
-   the real IDs.
-
-   Many applications today still use the ``V4L2_CID_PRIVATE_BASE`` IDs
-   instead of using :ref:`VIDIOC_QUERYCTRL` with
-   the ``V4L2_CTRL_FLAG_NEXT_CTRL`` flag to enumerate all IDs, so
-   support for ``V4L2_CID_PRIVATE_BASE`` is still around.
diff --git a/Documentation/media/uapi/v4l/crop.rst b/Documentation/media/uapi/v4l/crop.rst
deleted file mode 100644
index ada7c22e6291..000000000000
--- a/Documentation/media/uapi/v4l/crop.rst
+++ /dev/null
@@ -1,324 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _crop:
-
-*****************************************************
-Image Cropping, Insertion and Scaling -- the CROP API
-*****************************************************
-
-.. note::
-
-   The CROP API is mostly superseded by the newer :ref:`SELECTION API
-   <selection-api>`. The new API should be preferred in most cases,
-   with the exception of pixel aspect ratio detection, which is
-   implemented by :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` and has no
-   equivalent in the SELECTION API. See :ref:`selection-vs-crop` for a
-   comparison of the two APIs.
-
-Some video capture devices can sample a subsection of the picture and
-shrink or enlarge it to an image of arbitrary size. We call these
-abilities cropping and scaling. Some video output devices can scale an
-image up or down and insert it at an arbitrary scan line and horizontal
-offset into a video signal.
-
-Applications can use the following API to select an area in the video
-signal, query the default area and the hardware limits.
-
-.. note::
-
-   Despite their name, the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>`,
-   :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_S_CROP
-   <VIDIOC_G_CROP>` ioctls apply to input as well as output devices.
-
-Scaling requires a source and a target. On a video capture or overlay
-device the source is the video signal, and the cropping ioctls determine
-the area actually sampled. The target are images read by the application
-or overlaid onto the graphics screen. Their size (and position for an
-overlay) is negotiated with the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
-and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctls.
-
-On a video output device the source are the images passed in by the
-application, and their size is again negotiated with the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
-ioctls, or may be encoded in a compressed video stream. The target is
-the video signal, and the cropping ioctls determine the area where the
-images are inserted.
-
-Source and target rectangles are defined even if the device does not
-support scaling or the :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and
-:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` ioctls. Their size (and position
-where applicable) will be fixed in this case.
-
-.. note::
-
-   All capture and output devices that support the CROP or SELECTION
-   API will also support the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>`
-   ioctl.
-
-Cropping Structures
-===================
-
-
-.. _crop-scale:
-
-.. kernel-figure:: crop.svg
-    :alt:    crop.svg
-    :align:  center
-
-    Image Cropping, Insertion and Scaling
-
-    The cropping, insertion and scaling process
-
-
-
-For capture devices the coordinates of the top left corner, width and
-height of the area which can be sampled is given by the ``bounds``
-substructure of the struct :c:type:`v4l2_cropcap` returned
-by the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` ioctl. To support a wide
-range of hardware this specification does not define an origin or units.
-However by convention drivers should horizontally count unscaled samples
-relative to 0H (the leading edge of the horizontal sync pulse, see
-:ref:`vbi-hsync`). Vertically ITU-R line numbers of the first field
-(see ITU R-525 line numbering for :ref:`525 lines <vbi-525>` and for
-:ref:`625 lines <vbi-625>`), multiplied by two if the driver
-can capture both fields.
-
-The top left corner, width and height of the source rectangle, that is
-the area actually sampled, is given by struct
-:c:type:`v4l2_crop` using the same coordinate system as
-struct :c:type:`v4l2_cropcap`. Applications can use the
-:ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>`
-ioctls to get and set this rectangle. It must lie completely within the
-capture boundaries and the driver may further adjust the requested size
-and/or position according to hardware limitations.
-
-Each capture device has a default source rectangle, given by the
-``defrect`` substructure of struct
-:c:type:`v4l2_cropcap`. The center of this rectangle
-shall align with the center of the active picture area of the video
-signal, and cover what the driver writer considers the complete picture.
-Drivers shall reset the source rectangle to the default when the driver
-is first loaded, but not later.
-
-For output devices these structures and ioctls are used accordingly,
-defining the *target* rectangle where the images will be inserted into
-the video signal.
-
-
-Scaling Adjustments
-===================
-
-Video hardware can have various cropping, insertion and scaling
-limitations. It may only scale up or down, support only discrete scaling
-factors, or have different scaling abilities in horizontal and vertical
-direction. Also it may not support scaling at all. At the same time the
-struct :c:type:`v4l2_crop` rectangle may have to be aligned,
-and both the source and target rectangles may have arbitrary upper and
-lower size limits. In particular the maximum ``width`` and ``height`` in
-struct :c:type:`v4l2_crop` may be smaller than the struct
-:c:type:`v4l2_cropcap`. ``bounds`` area. Therefore, as
-usual, drivers are expected to adjust the requested parameters and
-return the actual values selected.
-
-Applications can change the source or the target rectangle first, as
-they may prefer a particular image size or a certain area in the video
-signal. If the driver has to adjust both to satisfy hardware
-limitations, the last requested rectangle shall take priority, and the
-driver should preferably adjust the opposite one. The
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl however shall not change
-the driver state and therefore only adjust the requested rectangle.
-
-Suppose scaling on a video capture device is restricted to a factor 1:1
-or 2:1 in either direction and the target image size must be a multiple
-of 16 × 16 pixels. The source cropping rectangle is set to defaults,
-which are also the upper limit in this example, of 640 × 400 pixels at
-offset 0, 0. An application requests an image size of 300 × 225 pixels,
-assuming video will be scaled down from the "full picture" accordingly.
-The driver sets the image size to the closest possible values 304 × 224,
-then chooses the cropping rectangle closest to the requested size, that
-is 608 × 224 (224 × 2:1 would exceed the limit 400). The offset 0, 0 is
-still valid, thus unmodified. Given the default cropping rectangle
-reported by :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` the application can
-easily propose another offset to center the cropping rectangle.
-
-Now the application may insist on covering an area using a picture
-aspect ratio closer to the original request, so it asks for a cropping
-rectangle of 608 × 456 pixels. The present scaling factors limit
-cropping to 640 × 384, so the driver returns the cropping size 608 × 384
-and adjusts the image size to closest possible 304 × 192.
-
-
-Examples
-========
-
-Source and target rectangles shall remain unchanged across closing and
-reopening a device, such that piping data into or out of a device will
-work without special preparations. More advanced applications should
-ensure the parameters are suitable before starting I/O.
-
-.. note::
-
-   On the next two examples, a video capture device is assumed;
-   change ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` for other types of device.
-
-Example: Resetting the cropping parameters
-==========================================
-
-.. code-block:: c
-
-    struct v4l2_cropcap cropcap;
-    struct v4l2_crop crop;
-
-    memset (&cropcap, 0, sizeof (cropcap));
-    cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-    if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
-	perror ("VIDIOC_CROPCAP");
-	exit (EXIT_FAILURE);
-    }
-
-    memset (&crop, 0, sizeof (crop));
-    crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-    crop.c = cropcap.defrect;
-
-    /* Ignore if cropping is not supported (EINVAL). */
-
-    if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
-	&& errno != EINVAL) {
-	perror ("VIDIOC_S_CROP");
-	exit (EXIT_FAILURE);
-    }
-
-
-Example: Simple downscaling
-===========================
-
-.. code-block:: c
-
-    struct v4l2_cropcap cropcap;
-    struct v4l2_format format;
-
-    reset_cropping_parameters ();
-
-    /* Scale down to 1/4 size of full picture. */
-
-    memset (&format, 0, sizeof (format)); /* defaults */
-
-    format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-    format.fmt.pix.width = cropcap.defrect.width >> 1;
-    format.fmt.pix.height = cropcap.defrect.height >> 1;
-    format.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
-
-    if (-1 == ioctl (fd, VIDIOC_S_FMT, &format)) {
-	perror ("VIDIOC_S_FORMAT");
-	exit (EXIT_FAILURE);
-    }
-
-    /* We could check the actual image size now, the actual scaling factor
-       or if the driver can scale at all. */
-
-Example: Selecting an output area
-=================================
-
-.. note:: This example assumes an output device.
-
-.. code-block:: c
-
-    struct v4l2_cropcap cropcap;
-    struct v4l2_crop crop;
-
-    memset (&cropcap, 0, sizeof (cropcap));
-    cropcap.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-
-    if (-1 == ioctl (fd, VIDIOC_CROPCAP;, &cropcap)) {
-	perror ("VIDIOC_CROPCAP");
-	exit (EXIT_FAILURE);
-    }
-
-    memset (&crop, 0, sizeof (crop));
-
-    crop.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-    crop.c = cropcap.defrect;
-
-    /* Scale the width and height to 50 % of their original size
-       and center the output. */
-
-    crop.c.width /= 2;
-    crop.c.height /= 2;
-    crop.c.left += crop.c.width / 2;
-    crop.c.top += crop.c.height / 2;
-
-    /* Ignore if cropping is not supported (EINVAL). */
-
-    if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
-	&& errno != EINVAL) {
-	perror ("VIDIOC_S_CROP");
-	exit (EXIT_FAILURE);
-    }
-
-Example: Current scaling factor and pixel aspect
-================================================
-
-.. note:: This example assumes a video capture device.
-
-.. code-block:: c
-
-    struct v4l2_cropcap cropcap;
-    struct v4l2_crop crop;
-    struct v4l2_format format;
-    double hscale, vscale;
-    double aspect;
-    int dwidth, dheight;
-
-    memset (&cropcap, 0, sizeof (cropcap));
-    cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-    if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
-	perror ("VIDIOC_CROPCAP");
-	exit (EXIT_FAILURE);
-    }
-
-    memset (&crop, 0, sizeof (crop));
-    crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-    if (-1 == ioctl (fd, VIDIOC_G_CROP, &crop)) {
-	if (errno != EINVAL) {
-	    perror ("VIDIOC_G_CROP");
-	    exit (EXIT_FAILURE);
-	}
-
-	/* Cropping not supported. */
-	crop.c = cropcap.defrect;
-    }
-
-    memset (&format, 0, sizeof (format));
-    format.fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-    if (-1 == ioctl (fd, VIDIOC_G_FMT, &format)) {
-	perror ("VIDIOC_G_FMT");
-	exit (EXIT_FAILURE);
-    }
-
-    /* The scaling applied by the driver. */
-
-    hscale = format.fmt.pix.width / (double) crop.c.width;
-    vscale = format.fmt.pix.height / (double) crop.c.height;
-
-    aspect = cropcap.pixelaspect.numerator /
-	 (double) cropcap.pixelaspect.denominator;
-    aspect = aspect * hscale / vscale;
-
-    /* Devices following ITU-R BT.601 do not capture
-       square pixels. For playback on a computer monitor
-       we should scale the images to this size. */
-
-    dwidth = format.fmt.pix.width / aspect;
-    dheight = format.fmt.pix.height;
diff --git a/Documentation/media/uapi/v4l/crop.svg b/Documentation/media/uapi/v4l/crop.svg
deleted file mode 100644
index 32d72598d135..000000000000
--- a/Documentation/media/uapi/v4l/crop.svg
+++ /dev/null
@@ -1,290 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   xml:space="preserve"
-   width="208.59436mm"
-   height="95.859146mm"
-   viewBox="0 0 739.11388 339.6584"
-   sodipodi:docname="crop.svg"><metadata
-     id="metadata8"><rdf:RDF><cc:Work
-	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
-     id="defs6"><clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath44"><path
-	 d="m 0,0 0,1895 4118,0 L 4118,0 0,0 Z m 3051.62,250.48 8.19,17.01 -46.93,23.31 29.61,-25.515 -38.12,8.505 47.25,-23.31 z m -1559.25,800.73 -8.5,-17.01 46.93,-23.31 -29.29,25.2 37.8,-8.19 -46.94,23.31 z"
-	 id="path46"
-	 inkscape:connector-curvature="0"
-	 style="clip-rule:evenodd" /></clipPath><clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath64"><path
-	 d="m 0,0 0,1895 4118,0 0,-1626 -1,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 -4,0 0,1 -5,0 0,1 -4,0 0,1 -5,0 0,1 -4,0 0,1 -4,0 0,1 -4,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 1,0 0,3 1,0 0,2 1,0 0,2 1,0 L 4118,0 0,0 Z m 4074,272 0,-1 1,0 0,1 -1,0 z m -1486,743 0,-1 1,0 0,1 -1,0 z m -2,1 0,-1 1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,1 -1,0 0,1
--1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,2 2,0 0,-1 4,0 0,-1 5,0 0,-1 4,0 0,-1 5,0 0,-1 5,0 0,-1 4,0 0,-1 3,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -3,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 z"
-	 id="path66"
-	 inkscape:connector-curvature="0"
-	 style="clip-rule:evenodd" /></clipPath><clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath84"><path
-	 d="m 0,0 0,1895 4118,0 0,-136 -3,0 0,-1 -11,0 0,-1 -11,0 0,-1 -11,0 0,-1 -11,0 0,-1 5,0 0,-1 6,0 0,-1 7,0 0,-1 6,0 0,-1 6,0 0,-1 4,0 0,-1 -1,0 0,-1 -3,0 0,-1 -3,0 0,-1 -2,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 7,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 3,0 L 4118,0 0,0 Z m 2552,1599 0,-1 2,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 -4,0 0,1 -7,0 0,1 -6,0 0,1 -7,0 0,1 -6,0 0,1 -3,0 0,1 2,0 0,1 2,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 2,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 -7,0 0,-1 -12,0 0,-1 -11,0 0,-1 -11,0 0,-1 -4,0 0,-1 1,0 0,-12 1,0 0,-4 z"
-	 id="path86"
-	 inkscape:connector-curvature="0"
-	 style="clip-rule:evenodd" /></clipPath><clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath104"><path
-	 d="m 0,0 0,1895 4118,0 L 4118,0 0,0 Z m 3056.98,1740.43 -1.58,18.9 -52.6,-4.72 38.74,-6.3 -36.85,-12.6 52.29,4.72 z m -1570.28,-123.79 1.58,-18.9 52.6,4.72 -38.43,5.99 36.54,12.91 -52.29,-4.72 z"
-	 id="path106"
-	 inkscape:connector-curvature="0"
-	 style="clip-rule:evenodd" /></clipPath></defs><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview4"
-     showgrid="false"
-     inkscape:zoom="0.99625351"
-     inkscape:cx="-73.227122"
-     inkscape:cy="114.17568"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="g10"
-     units="mm"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0" /><g
-     id="g10"
-     inkscape:groupmode="layer"
-     inkscape:label="crop"
-     transform="matrix(1.25,0,0,-1.25,-0.35237428,339.91141)"><path
-       d="m 411.08474,0.37218832 0,271.38551168 -37.17867,0 0,-1.94649 -205.3611,1.94649 0,-2.58046 -155.911966,0 0,-1.90192 17.977663,-264.3219406 -17.977663,0 0,-2.58119108 193.135216,0 0,2.58119108 -137.934309,0 0,264.3219406 333.650679,0 0,-264.3219406 -177.10547,0 0,-1.947197 149.52695,0 0,-0.63399408"
-       style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path16"
-       inkscape:connector-curvature="0" /><path
-       d="m 411.08474,0.37218832 0,271.38551168 -37.17867,0 0,-1.94649 -205.3611,1.94649 0,-2.58046 -155.911966,0 0,-1.90192 17.977663,-264.3219406 -17.977663,0 0,-2.58119108 193.135216,0 0,2.58119108 -137.934309,0 0,264.3219406 333.650679,0 0,-264.3219406 -177.10547,0 0,-1.947197 149.52695,0 0,-0.63399408 37.17867,0 z"
-       style="fill:none;stroke:#000000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path18"
-       inkscape:connector-curvature="0" /><path
-       d="m 40.256106,6.8024838 366.979524,0 0,253.4078762 -366.979524,0 0,-253.4078762 z"
-       style="fill:none;stroke:#ff0000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path20"
-       inkscape:connector-curvature="0" /><path
-       d="m 77.434066,7.4364707 316.352284,0 0,244.4416893 -316.352284,0 0,-244.4416893 z"
-       style="fill:none;stroke:#0000ff;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path22"
-       inkscape:connector-curvature="0" /><path
-       d="m 214.41669,149.49157 152.83195,0 0,81.51075 -152.83195,0 0,-81.51075 z"
-       style="fill:none;stroke:#00b000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path24"
-       inkscape:connector-curvature="0" /><path
-       d="m 438.57126,37.414285 152.83194,0 0,213.966445 -152.83194,0 0,-213.966445 z"
-       style="fill:none;stroke:#d100d1;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path26"
-       inkscape:connector-curvature="0" /><path
-       d="m 0.45168907,271.7577 168.09328093,0 0,-2.58046 -155.911966,0 0,-1.90192 17.977663,0 0,-264.3219406 -17.977663,0 0,-2.58119108 -12.18131493,0"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path28"
-       inkscape:connector-curvature="0" /><path
-       d="m 0.45168907,271.7577 168.09328093,0 0,-2.58046 -155.911966,0 0,-1.90192 17.977663,0 0,-264.3219406 -17.977663,0 0,-2.58119108 -12.18131493,0 0,271.38551168 z"
-       style="fill:none;stroke:#000000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path30"
-       inkscape:connector-curvature="0" /><path
-       d="m 373.90607,0.37218832 0,0.63399408 -149.52695,0 0,1.947197 -18.6109,0 0,-2.58119108"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path32"
-       inkscape:connector-curvature="0" /><path
-       d="m 373.90607,0.37218832 0,0.63399408 -149.52695,0 0,1.947197 -18.6109,0 0,-2.58119108 168.13785,0 z"
-       style="fill:none;stroke:#000000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path34"
-       inkscape:connector-curvature="0" /><path
-       d="m 205.76822,271.7577 168.13785,0 0,-1.94649 -149.52695,0 0,-2.53589 -18.6109,0"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path36"
-       inkscape:connector-curvature="0" /><path
-       d="m 205.76822,271.7577 168.13785,0 0,-1.94649 -149.52695,0 0,-2.53589 -18.6109,0 0,4.48238 z"
-       style="fill:none;stroke:#000000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path38"
-       inkscape:connector-curvature="0" /><g
-       id="g40"
-       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
-	 clip-path="url(#clipPath44)"
-	 id="g42"><path
-	   inkscape:connector-curvature="0"
-	   id="path48"
-	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   d="M 1492.37,1040.5 3051.62,260.875" /></g></g><g
-       id="g50"
-       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><path
-	 inkscape:connector-curvature="0"
-	 id="path52"
-	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-	 d="m 1539.31,1027.9 -37.8,8.19 29.29,-25.2 8.51,17.01" /><path
-	 inkscape:connector-curvature="0"
-	 id="path54"
-	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1539.31,1027.9 -37.8,8.19 29.29,-25.2 8.51,17.01 z" /><path
-	 inkscape:connector-curvature="0"
-	 id="path56"
-	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-	 d="m 3004.37,273.79 38.12,-8.505 -29.61,25.515 -8.51,-17.01" /><path
-	 inkscape:connector-curvature="0"
-	 id="path58"
-	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 3004.37,273.79 38.12,-8.505 -29.61,25.515 -8.51,-17.01 z" /></g><g
-       id="g60"
-       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
-	 clip-path="url(#clipPath64)"
-	 id="g62"><path
-	   inkscape:connector-curvature="0"
-	   id="path68"
-	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   d="M 2555.5,1040.5 4114.75,260.875" /></g></g><g
-       id="g70"
-       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><path
-	 inkscape:connector-curvature="0"
-	 id="path72"
-	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-	 d="m 2602.43,1027.9 -37.8,8.19 29.3,-25.2 8.5,17.01" /><path
-	 inkscape:connector-curvature="0"
-	 id="path74"
-	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2602.43,1027.9 -37.8,8.19 29.3,-25.2 8.5,17.01 z" /><path
-	 inkscape:connector-curvature="0"
-	 id="path76"
-	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-	 d="m 4067.5,273.79 38.11,-8.505 -29.61,25.515 -8.5,-17.01" /><path
-	 inkscape:connector-curvature="0"
-	 id="path78"
-	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 4067.5,273.79 38.11,-8.505 -29.61,25.515 -8.5,-17.01 z" /></g><g
-       id="g80"
-       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
-	 clip-path="url(#clipPath84)"
-	 id="g82"><path
-	   inkscape:connector-curvature="0"
-	   id="path88"
-	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   d="m 2555.5,1607.5 1559.25,141.75" /></g></g><g
-       id="g90"
-       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><path
-	 inkscape:connector-curvature="0"
-	 id="path92"
-	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-	 d="m 2602.12,1621.36 -36.54,-12.91 38.43,-5.99 -1.89,18.9" /><path
-	 inkscape:connector-curvature="0"
-	 id="path94"
-	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2602.12,1621.36 -36.54,-12.91 38.43,-5.99 -1.89,18.9 z" /><path
-	 inkscape:connector-curvature="0"
-	 id="path96"
-	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-	 d="m 4067.81,1735.71 36.86,12.6 -38.75,6.3 1.89,-18.9" /><path
-	 inkscape:connector-curvature="0"
-	 id="path98"
-	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 4067.81,1735.71 36.86,12.6 -38.75,6.3 1.89,-18.9 z" /></g><g
-       id="g100"
-       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
-	 clip-path="url(#clipPath104)"
-	 id="g102"><path
-	   inkscape:connector-curvature="0"
-	   id="path108"
-	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   d="m 1492.37,1607.5 1559.25,141.75" /></g></g><path
-       d="m 221.11869,232.99481 -5.25292,-1.85592 5.52462,-0.86111 -0.2717,2.71703"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path112"
-       inkscape:connector-curvature="0" /><path
-       d="m 221.11869,232.99481 -5.25292,-1.85592 5.52462,-0.86111 -0.2717,2.71703 z"
-       style="fill:none;stroke:#000000;stroke-width:0.67925626;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path114"
-       inkscape:connector-curvature="0" /><path
-       d="m 431.8247,249.43353 5.29748,1.81135 -5.56918,0.90567 0.2717,-2.71702"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path116"
-       inkscape:connector-curvature="0" /><path
-       d="m 431.8247,249.43353 5.29748,1.81135 -5.56918,0.90567 0.2717,-2.71702 z"
-       style="fill:none;stroke:#000000;stroke-width:0.67925626;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path118"
-       inkscape:connector-curvature="0" /><g
-       id="g120"
-       transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
-	 transform="matrix(1,0,0,-1,204.52,9.07751)"
-	 style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#d10000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-	 id="text122"><tspan
-	   x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 31.983524 35.661465 39.339405 41.178375 44.856316 48.534256 52.212196 55.890137 59.568073"
-	   y="0"
-	   sodipodi:role="line"
-	   id="tspan124">v4l2_cropcap.bounds</tspan></text>
-</g><g
-       id="g126"
-       transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
-	 transform="matrix(1,0,0,-1,58.5175,166.42)"
-	 style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#0000d1;fill-opacity:1;fill-rule:nonzero;stroke:none"
-	 id="text128"><tspan
-	   x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 31.983524 35.661465 39.339405 41.178375 44.856316 48.534256 50.373226 52.576019 56.25396 59.561459"
-	   y="0"
-	   sodipodi:role="line"
-	   id="tspan130">v4l2_cropcap.defrect</tspan></text>
-</g><g
-       id="g132"
-       transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
-	 transform="matrix(1,0,0,-1,153.49,152.245)"
-	 style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#008f00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-	 id="text134"><tspan
-	   x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 30.514996"
-	   y="0"
-	   sodipodi:role="line"
-	   id="tspan136">v4l2_crop.c</tspan></text>
-</g><g
-       id="g138"
-       transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
-	 transform="matrix(1,0,0,-1,309.415,30.34)"
-	 style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#b000b0;fill-opacity:1;fill-rule:nonzero;stroke:none"
-	 id="text140"><tspan
-	   x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 17.648821 21.326759 23.529554 29.03985 32.717789"
-	   y="0"
-	   sodipodi:role="line"
-	   id="tspan142">v4l2_format</tspan></text>
-</g><text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:32px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-99.291145"
-       y="-239.49893"
-       id="text3396"
-       sodipodi:linespacing="125%"
-       transform="scale(1,-1)"><tspan
-	 sodipodi:role="line"
-	 id="tspan3398"
-	 x="-99.291145"
-	 y="-239.49893"></tspan><tspan
-	 sodipodi:role="line"
-	 x="-99.291145"
-	 y="-199.49893"
-	 id="tspan3400" /></text>
-</g></svg>
diff --git a/Documentation/media/uapi/v4l/depth-formats.rst b/Documentation/media/uapi/v4l/depth-formats.rst
deleted file mode 100644
index 1bfd0b82cb85..000000000000
--- a/Documentation/media/uapi/v4l/depth-formats.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _depth-formats:
-
-*************
-Depth Formats
-*************
-
-Depth data provides distance to points, mapped onto the image plane
-
-
-.. toctree::
-    :maxdepth: 1
-
-    pixfmt-inzi
-    pixfmt-z16
-    pixfmt-cnf4
diff --git a/Documentation/media/uapi/v4l/dev-capture.rst b/Documentation/media/uapi/v4l/dev-capture.rst
deleted file mode 100644
index 134e22b32338..000000000000
--- a/Documentation/media/uapi/v4l/dev-capture.rst
+++ /dev/null
@@ -1,111 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _capture:
-
-***********************
-Video Capture Interface
-***********************
-
-Video capture devices sample an analog video signal and store the
-digitized images in memory. Today nearly all devices can capture at full
-25 or 30 frames/second. With this interface applications can control the
-capture process and move images from the driver into user space.
-
-Conventionally V4L2 video capture devices are accessed through character
-device special files named ``/dev/video`` and ``/dev/video0`` to
-``/dev/video63`` with major number 81 and minor numbers 0 to 63.
-``/dev/video`` is typically a symbolic link to the preferred video
-device.
-
-.. note:: The same device file names are used for video output devices.
-
-
-Querying Capabilities
-=====================
-
-Devices supporting the video capture interface set the
-``V4L2_CAP_VIDEO_CAPTURE`` or ``V4L2_CAP_VIDEO_CAPTURE_MPLANE`` flag in
-the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. As secondary device
-functions they may also support the :ref:`video overlay <overlay>`
-(``V4L2_CAP_VIDEO_OVERLAY``) and the :ref:`raw VBI capture <raw-vbi>`
-(``V4L2_CAP_VBI_CAPTURE``) interface. At least one of the read/write or
-streaming I/O methods must be supported. Tuners and audio inputs are
-optional.
-
-
-Supplemental Functions
-======================
-
-Video capture devices shall support :ref:`audio input <audio>`,
-:ref:`tuner`, :ref:`controls <control>`,
-:ref:`cropping and scaling <crop>` and
-:ref:`streaming parameter <streaming-par>` ioctls as needed. The
-:ref:`video input <video>` ioctls must be supported by all video
-capture devices.
-
-
-Image Format Negotiation
-========================
-
-The result of a capture operation is determined by cropping and image
-format parameters. The former select an area of the video picture to
-capture, the latter how images are stored in memory, i. e. in RGB or YUV
-format, the number of bits per pixel or width and height. Together they
-also define how images are scaled in the process.
-
-As usual these parameters are *not* reset at :ref:`open() <func-open>`
-time to permit Unix tool chains, programming a device and then reading
-from it as if it was a plain file. Well written V4L2 applications ensure
-they really get what they want, including cropping and scaling.
-
-Cropping initialization at minimum requires to reset the parameters to
-defaults. An example is given in :ref:`crop`.
-
-To query the current image format applications set the ``type`` field of
-a struct :c:type:`v4l2_format` to
-``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or
-``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and call the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl with a pointer to this
-structure. Drivers fill the struct
-:c:type:`v4l2_pix_format` ``pix`` or the struct
-:c:type:`v4l2_pix_format_mplane` ``pix_mp``
-member of the ``fmt`` union.
-
-To request different parameters applications set the ``type`` field of a
-struct :c:type:`v4l2_format` as above and initialize all
-fields of the struct :c:type:`v4l2_pix_format`
-``vbi`` member of the ``fmt`` union, or better just modify the results
-of :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, and call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
-ioctl with a pointer to this structure. Drivers may adjust the
-parameters and finally return the actual parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
-does.
-
-Like :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` the :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl
-can be used to learn about hardware limitations without disabling I/O or
-possibly time consuming hardware preparations.
-
-The contents of struct :c:type:`v4l2_pix_format` and
-struct :c:type:`v4l2_pix_format_mplane` are
-discussed in :ref:`pixfmt`. See also the specification of the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctls for
-details. Video capture devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
-and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, even if :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ignores all
-requests and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does.
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional.
-
-
-Reading Images
-==============
-
-A video capture device may support the :ref:`read() function <func-read>`
-and/or streaming (:ref:`memory mapping <func-mmap>` or
-:ref:`user pointer <userp>`) I/O. See :ref:`io` for details.
diff --git a/Documentation/media/uapi/v4l/dev-decoder.rst b/Documentation/media/uapi/v4l/dev-decoder.rst
deleted file mode 100644
index 606b54947e10..000000000000
--- a/Documentation/media/uapi/v4l/dev-decoder.rst
+++ /dev/null
@@ -1,1101 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. _decoder:
-
-*************************************************
-Memory-to-Memory Stateful Video Decoder Interface
-*************************************************
-
-A stateful video decoder takes complete chunks of the bytestream (e.g. Annex-B
-H.264/HEVC stream, raw VP8/9 stream) and decodes them into raw video frames in
-display order. The decoder is expected not to require any additional information
-from the client to process these buffers.
-
-Performing software parsing, processing etc. of the stream in the driver in
-order to support this interface is strongly discouraged. In case such
-operations are needed, use of the Stateless Video Decoder Interface (in
-development) is strongly advised.
-
-Conventions and Notations Used in This Document
-===============================================
-
-1. The general V4L2 API rules apply if not specified in this document
-   otherwise.
-
-2. The meaning of words "must", "may", "should", etc. is as per `RFC
-   2119 <https://tools.ietf.org/html/rfc2119>`_.
-
-3. All steps not marked "optional" are required.
-
-4. :c:func:`VIDIOC_G_EXT_CTRLS` and :c:func:`VIDIOC_S_EXT_CTRLS` may be used
-   interchangeably with :c:func:`VIDIOC_G_CTRL` and :c:func:`VIDIOC_S_CTRL`,
-   unless specified otherwise.
-
-5. Single-planar API (see :ref:`planar-apis`) and applicable structures may be
-   used interchangeably with multi-planar API, unless specified otherwise,
-   depending on decoder capabilities and following the general V4L2 guidelines.
-
-6. i = [a..b]: sequence of integers from a to b, inclusive, i.e. i =
-   [0..2]: i = 0, 1, 2.
-
-7. Given an ``OUTPUT`` buffer A, then A’ represents a buffer on the ``CAPTURE``
-   queue containing data that resulted from processing buffer A.
-
-.. _decoder-glossary:
-
-Glossary
-========
-
-CAPTURE
-   the destination buffer queue; for decoders, the queue of buffers containing
-   decoded frames; for encoders, the queue of buffers containing an encoded
-   bytestream; ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or
-   ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``; data is captured from the hardware
-   into ``CAPTURE`` buffers.
-
-client
-   the application communicating with the decoder or encoder implementing
-   this interface.
-
-coded format
-   encoded/compressed video bytestream format (e.g. H.264, VP8, etc.); see
-   also: raw format.
-
-coded height
-   height for given coded resolution.
-
-coded resolution
-   stream resolution in pixels aligned to codec and hardware requirements;
-   typically visible resolution rounded up to full macroblocks;
-   see also: visible resolution.
-
-coded width
-   width for given coded resolution.
-
-decode order
-   the order in which frames are decoded; may differ from display order if the
-   coded format includes a feature of frame reordering; for decoders,
-   ``OUTPUT`` buffers must be queued by the client in decode order; for
-   encoders ``CAPTURE`` buffers must be returned by the encoder in decode order.
-
-destination
-   data resulting from the decode process; see ``CAPTURE``.
-
-display order
-   the order in which frames must be displayed; for encoders, ``OUTPUT``
-   buffers must be queued by the client in display order; for decoders,
-   ``CAPTURE`` buffers must be returned by the decoder in display order.
-
-DPB
-   Decoded Picture Buffer; an H.264/HEVC term for a buffer that stores a decoded
-   raw frame available for reference in further decoding steps.
-
-EOS
-   end of stream.
-
-IDR
-   Instantaneous Decoder Refresh; a type of a keyframe in an H.264/HEVC-encoded
-   stream, which clears the list of earlier reference frames (DPBs).
-
-keyframe
-   an encoded frame that does not reference frames decoded earlier, i.e.
-   can be decoded fully on its own.
-
-macroblock
-   a processing unit in image and video compression formats based on linear
-   block transforms (e.g. H.264, VP8, VP9); codec-specific, but for most of
-   popular codecs the size is 16x16 samples (pixels).
-
-OUTPUT
-   the source buffer queue; for decoders, the queue of buffers containing
-   an encoded bytestream; for encoders, the queue of buffers containing raw
-   frames; ``V4L2_BUF_TYPE_VIDEO_OUTPUT`` or
-   ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``; the hardware is fed with data
-   from ``OUTPUT`` buffers.
-
-PPS
-   Picture Parameter Set; a type of metadata entity in an H.264/HEVC bytestream.
-
-raw format
-   uncompressed format containing raw pixel data (e.g. YUV, RGB formats).
-
-resume point
-   a point in the bytestream from which decoding may start/continue, without
-   any previous state/data present, e.g.: a keyframe (VP8/VP9) or
-   SPS/PPS/IDR sequence (H.264/HEVC); a resume point is required to start decode
-   of a new stream, or to resume decoding after a seek.
-
-source
-   data fed to the decoder or encoder; see ``OUTPUT``.
-
-source height
-   height in pixels for given source resolution; relevant to encoders only.
-
-source resolution
-   resolution in pixels of source frames being source to the encoder and
-   subject to further cropping to the bounds of visible resolution; relevant to
-   encoders only.
-
-source width
-   width in pixels for given source resolution; relevant to encoders only.
-
-SPS
-   Sequence Parameter Set; a type of metadata entity in an H.264/HEVC bytestream.
-
-stream metadata
-   additional (non-visual) information contained inside encoded bytestream;
-   for example: coded resolution, visible resolution, codec profile.
-
-visible height
-   height for given visible resolution; display height.
-
-visible resolution
-   stream resolution of the visible picture, in pixels, to be used for
-   display purposes; must be smaller or equal to coded resolution;
-   display resolution.
-
-visible width
-   width for given visible resolution; display width.
-
-State Machine
-=============
-
-.. kernel-render:: DOT
-   :alt: DOT digraph of decoder state machine
-   :caption: Decoder State Machine
-
-   digraph decoder_state_machine {
-       node [shape = doublecircle, label="Decoding"] Decoding;
-
-       node [shape = circle, label="Initialization"] Initialization;
-       node [shape = circle, label="Capture\nsetup"] CaptureSetup;
-       node [shape = circle, label="Dynamic\nResolution\nChange"] ResChange;
-       node [shape = circle, label="Stopped"] Stopped;
-       node [shape = circle, label="Drain"] Drain;
-       node [shape = circle, label="Seek"] Seek;
-       node [shape = circle, label="End of Stream"] EoS;
-
-       node [shape = point]; qi
-       qi -> Initialization [ label = "open()" ];
-
-       Initialization -> CaptureSetup [ label = "CAPTURE\nformat\nestablished" ];
-
-       CaptureSetup -> Stopped [ label = "CAPTURE\nbuffers\nready" ];
-
-       Decoding -> ResChange [ label = "Stream\nresolution\nchange" ];
-       Decoding -> Drain [ label = "V4L2_DEC_CMD_STOP" ];
-       Decoding -> EoS [ label = "EoS mark\nin the stream" ];
-       Decoding -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
-       Decoding -> Stopped [ label = "VIDIOC_STREAMOFF(CAPTURE)" ];
-       Decoding -> Decoding;
-
-       ResChange -> CaptureSetup [ label = "CAPTURE\nformat\nestablished" ];
-       ResChange -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
-
-       EoS -> Drain [ label = "Implicit\ndrain" ];
-
-       Drain -> Stopped [ label = "All CAPTURE\nbuffers dequeued\nor\nVIDIOC_STREAMOFF(CAPTURE)" ];
-       Drain -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
-
-       Seek -> Decoding [ label = "VIDIOC_STREAMON(OUTPUT)" ];
-       Seek -> Initialization [ label = "VIDIOC_REQBUFS(OUTPUT, 0)" ];
-
-       Stopped -> Decoding [ label = "V4L2_DEC_CMD_START\nor\nVIDIOC_STREAMON(CAPTURE)" ];
-       Stopped -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
-   }
-
-Querying Capabilities
-=====================
-
-1. To enumerate the set of coded formats supported by the decoder, the
-   client may call :c:func:`VIDIOC_ENUM_FMT` on ``OUTPUT``.
-
-   * The full set of supported formats will be returned, regardless of the
-     format set on ``CAPTURE``.
-   * Check the flags field of :c:type:`v4l2_fmtdesc` for more information
-     about the decoder's capabilities with respect to each coded format.
-     In particular whether or not the decoder has a full-fledged bytestream
-     parser and if the decoder supports dynamic resolution changes.
-
-2. To enumerate the set of supported raw formats, the client may call
-   :c:func:`VIDIOC_ENUM_FMT` on ``CAPTURE``.
-
-   * Only the formats supported for the format currently active on ``OUTPUT``
-     will be returned.
-
-   * In order to enumerate raw formats supported by a given coded format,
-     the client must first set that coded format on ``OUTPUT`` and then
-     enumerate formats on ``CAPTURE``.
-
-3. The client may use :c:func:`VIDIOC_ENUM_FRAMESIZES` to detect supported
-   resolutions for a given format, passing desired pixel format in
-   :c:type:`v4l2_frmsizeenum` ``pixel_format``.
-
-   * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a coded pixel
-     format will include all possible coded resolutions supported by the
-     decoder for given coded pixel format.
-
-   * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a raw pixel format
-     will include all possible frame buffer resolutions supported by the
-     decoder for given raw pixel format and the coded format currently set on
-     ``OUTPUT``.
-
-4. Supported profiles and levels for the coded format currently set on
-   ``OUTPUT``, if applicable, may be queried using their respective controls
-   via :c:func:`VIDIOC_QUERYCTRL`.
-
-Initialization
-==============
-
-1. Set the coded format on ``OUTPUT`` via :c:func:`VIDIOC_S_FMT`
-
-   * **Required fields:**
-
-     ``type``
-         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
-
-     ``pixelformat``
-         a coded pixel format.
-
-     ``width``, ``height``
-         coded resolution of the stream; required only if it cannot be parsed
-         from the stream for the given coded format; otherwise the decoder will
-         use this resolution as a placeholder resolution that will likely change
-         as soon as it can parse the actual coded resolution from the stream.
-
-     ``sizeimage``
-         desired size of ``OUTPUT`` buffers; the decoder may adjust it to
-         match hardware requirements.
-
-     other fields
-         follow standard semantics.
-
-   * **Return fields:**
-
-     ``sizeimage``
-         adjusted size of ``OUTPUT`` buffers.
-
-   * The ``CAPTURE`` format will be updated with an appropriate frame buffer
-     resolution instantly based on the width and height returned by
-     :c:func:`VIDIOC_S_FMT`.
-     However, for coded formats that include stream resolution information,
-     after the decoder is done parsing the information from the stream, it will
-     update the ``CAPTURE`` format with new values and signal a source change
-     event, regardless of whether they match the values set by the client or
-     not.
-
-   .. important::
-
-      Changing the ``OUTPUT`` format may change the currently set ``CAPTURE``
-      format. How the new ``CAPTURE`` format is determined is up to the decoder
-      and the client must ensure it matches its needs afterwards.
-
-2.  Allocate source (bytestream) buffers via :c:func:`VIDIOC_REQBUFS` on
-    ``OUTPUT``.
-
-    * **Required fields:**
-
-      ``count``
-          requested number of buffers to allocate; greater than zero.
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
-
-      ``memory``
-          follows standard semantics.
-
-    * **Return fields:**
-
-      ``count``
-          the actual number of buffers allocated.
-
-    .. warning::
-
-       The actual number of allocated buffers may differ from the ``count``
-       given. The client must check the updated value of ``count`` after the
-       call returns.
-
-    Alternatively, :c:func:`VIDIOC_CREATE_BUFS` on the ``OUTPUT`` queue can be
-    used to have more control over buffer allocation.
-
-    * **Required fields:**
-
-      ``count``
-          requested number of buffers to allocate; greater than zero.
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
-
-      ``memory``
-          follows standard semantics.
-
-      ``format``
-          follows standard semantics.
-
-    * **Return fields:**
-
-      ``count``
-          adjusted to the number of allocated buffers.
-
-    .. warning::
-
-       The actual number of allocated buffers may differ from the ``count``
-       given. The client must check the updated value of ``count`` after the
-       call returns.
-
-3.  Start streaming on the ``OUTPUT`` queue via :c:func:`VIDIOC_STREAMON`.
-
-4.  **This step only applies to coded formats that contain resolution information
-    in the stream.** Continue queuing/dequeuing bytestream buffers to/from the
-    ``OUTPUT`` queue via :c:func:`VIDIOC_QBUF` and :c:func:`VIDIOC_DQBUF`. The
-    buffers will be processed and returned to the client in order, until
-    required metadata to configure the ``CAPTURE`` queue are found. This is
-    indicated by the decoder sending a ``V4L2_EVENT_SOURCE_CHANGE`` event with
-    ``changes`` set to ``V4L2_EVENT_SRC_CH_RESOLUTION``.
-
-    * It is not an error if the first buffer does not contain enough data for
-      this to occur. Processing of the buffers will continue as long as more
-      data is needed.
-
-    * If data in a buffer that triggers the event is required to decode the
-      first frame, it will not be returned to the client, until the
-      initialization sequence completes and the frame is decoded.
-
-    * If the client has not set the coded resolution of the stream on its own,
-      calling :c:func:`VIDIOC_G_FMT`, :c:func:`VIDIOC_S_FMT`,
-      :c:func:`VIDIOC_TRY_FMT` or :c:func:`VIDIOC_REQBUFS` on the ``CAPTURE``
-      queue will not return the real values for the stream until a
-      ``V4L2_EVENT_SOURCE_CHANGE`` event with ``changes`` set to
-      ``V4L2_EVENT_SRC_CH_RESOLUTION`` is signaled.
-
-    .. important::
-
-       Any client query issued after the decoder queues the event will return
-       values applying to the just parsed stream, including queue formats,
-       selection rectangles and controls.
-
-    .. note::
-
-       A client capable of acquiring stream parameters from the bytestream on
-       its own may attempt to set the width and height of the ``OUTPUT`` format
-       to non-zero values matching the coded size of the stream, skip this step
-       and continue with the `Capture Setup` sequence. However, it must not
-       rely on any driver queries regarding stream parameters, such as
-       selection rectangles and controls, since the decoder has not parsed them
-       from the stream yet. If the values configured by the client do not match
-       those parsed by the decoder, a `Dynamic Resolution Change` will be
-       triggered to reconfigure them.
-
-    .. note::
-
-       No decoded frames are produced during this phase.
-
-5.  Continue with the `Capture Setup` sequence.
-
-Capture Setup
-=============
-
-1.  Call :c:func:`VIDIOC_G_FMT` on the ``CAPTURE`` queue to get format for the
-    destination buffers parsed/decoded from the bytestream.
-
-    * **Required fields:**
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-    * **Return fields:**
-
-      ``width``, ``height``
-          frame buffer resolution for the decoded frames.
-
-      ``pixelformat``
-          pixel format for decoded frames.
-
-      ``num_planes`` (for _MPLANE ``type`` only)
-          number of planes for pixelformat.
-
-      ``sizeimage``, ``bytesperline``
-          as per standard semantics; matching frame buffer format.
-
-    .. note::
-
-       The value of ``pixelformat`` may be any pixel format supported by the
-       decoder for the current stream. The decoder should choose a
-       preferred/optimal format for the default configuration. For example, a
-       YUV format may be preferred over an RGB format if an additional
-       conversion step would be required for the latter.
-
-2.  **Optional.** Acquire the visible resolution via
-    :c:func:`VIDIOC_G_SELECTION`.
-
-    * **Required fields:**
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-      ``target``
-          set to ``V4L2_SEL_TGT_COMPOSE``.
-
-    * **Return fields:**
-
-      ``r.left``, ``r.top``, ``r.width``, ``r.height``
-          the visible rectangle; it must fit within the frame buffer resolution
-          returned by :c:func:`VIDIOC_G_FMT` on ``CAPTURE``.
-
-    * The following selection targets are supported on ``CAPTURE``:
-
-      ``V4L2_SEL_TGT_CROP_BOUNDS``
-          corresponds to the coded resolution of the stream.
-
-      ``V4L2_SEL_TGT_CROP_DEFAULT``
-          the rectangle covering the part of the ``CAPTURE`` buffer that
-          contains meaningful picture data (visible area); width and height
-          will be equal to the visible resolution of the stream.
-
-      ``V4L2_SEL_TGT_CROP``
-          the rectangle within the coded resolution to be output to
-          ``CAPTURE``; defaults to ``V4L2_SEL_TGT_CROP_DEFAULT``; read-only on
-          hardware without additional compose/scaling capabilities.
-
-      ``V4L2_SEL_TGT_COMPOSE_BOUNDS``
-          the maximum rectangle within a ``CAPTURE`` buffer, which the cropped
-          frame can be composed into; equal to ``V4L2_SEL_TGT_CROP`` if the
-          hardware does not support compose/scaling.
-
-      ``V4L2_SEL_TGT_COMPOSE_DEFAULT``
-          equal to ``V4L2_SEL_TGT_CROP``.
-
-      ``V4L2_SEL_TGT_COMPOSE``
-          the rectangle inside a ``CAPTURE`` buffer into which the cropped
-          frame is written; defaults to ``V4L2_SEL_TGT_COMPOSE_DEFAULT``;
-          read-only on hardware without additional compose/scaling capabilities.
-
-      ``V4L2_SEL_TGT_COMPOSE_PADDED``
-          the rectangle inside a ``CAPTURE`` buffer which is overwritten by the
-          hardware; equal to ``V4L2_SEL_TGT_COMPOSE`` if the hardware does not
-          write padding pixels.
-
-    .. warning::
-
-       The values are guaranteed to be meaningful only after the decoder
-       successfully parses the stream metadata. The client must not rely on the
-       query before that happens.
-
-3.  **Optional.** Enumerate ``CAPTURE`` formats via :c:func:`VIDIOC_ENUM_FMT` on
-    the ``CAPTURE`` queue. Once the stream information is parsed and known, the
-    client may use this ioctl to discover which raw formats are supported for
-    given stream and select one of them via :c:func:`VIDIOC_S_FMT`.
-
-    .. important::
-
-       The decoder will return only formats supported for the currently
-       established coded format, as per the ``OUTPUT`` format and/or stream
-       metadata parsed in this initialization sequence, even if more formats
-       may be supported by the decoder in general. In other words, the set
-       returned will be a subset of the initial query mentioned in the
-       `Querying Capabilities` section.
-
-       For example, a decoder may support YUV and RGB formats for resolutions
-       1920x1088 and lower, but only YUV for higher resolutions (due to
-       hardware limitations). After parsing a resolution of 1920x1088 or lower,
-       :c:func:`VIDIOC_ENUM_FMT` may return a set of YUV and RGB pixel formats,
-       but after parsing resolution higher than 1920x1088, the decoder will not
-       return RGB, unsupported for this resolution.
-
-       However, subsequent resolution change event triggered after
-       discovering a resolution change within the same stream may switch
-       the stream into a lower resolution and :c:func:`VIDIOC_ENUM_FMT`
-       would return RGB formats again in that case.
-
-4.  **Optional.** Set the ``CAPTURE`` format via :c:func:`VIDIOC_S_FMT` on the
-    ``CAPTURE`` queue. The client may choose a different format than
-    selected/suggested by the decoder in :c:func:`VIDIOC_G_FMT`.
-
-    * **Required fields:**
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-      ``pixelformat``
-          a raw pixel format.
-
-      ``width``, ``height``
-         frame buffer resolution of the decoded stream; typically unchanged from
-	 what was returned with :c:func:`VIDIOC_G_FMT`, but it may be different
-	 if the hardware supports composition and/or scaling.
-
-   * Setting the ``CAPTURE`` format will reset the compose selection rectangles
-     to their default values, based on the new resolution, as described in the
-     previous step.
-
-5. **Optional.** Set the compose rectangle via :c:func:`VIDIOC_S_SELECTION` on
-   the ``CAPTURE`` queue if it is desired and if the decoder has compose and/or
-   scaling capabilities.
-
-   * **Required fields:**
-
-     ``type``
-         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-     ``target``
-         set to ``V4L2_SEL_TGT_COMPOSE``.
-
-     ``r.left``, ``r.top``, ``r.width``, ``r.height``
-         the rectangle inside a ``CAPTURE`` buffer into which the cropped
-         frame is written; defaults to ``V4L2_SEL_TGT_COMPOSE_DEFAULT``;
-         read-only on hardware without additional compose/scaling capabilities.
-
-   * **Return fields:**
-
-     ``r.left``, ``r.top``, ``r.width``, ``r.height``
-         the visible rectangle; it must fit within the frame buffer resolution
-         returned by :c:func:`VIDIOC_G_FMT` on ``CAPTURE``.
-
-   .. warning::
-
-      The decoder may adjust the compose rectangle to the nearest
-      supported one to meet codec and hardware requirements. The client needs
-      to check the adjusted rectangle returned by :c:func:`VIDIOC_S_SELECTION`.
-
-6.  If all the following conditions are met, the client may resume the decoding
-    instantly:
-
-    * ``sizeimage`` of the new format (determined in previous steps) is less
-      than or equal to the size of currently allocated buffers,
-
-    * the number of buffers currently allocated is greater than or equal to the
-      minimum number of buffers acquired in previous steps. To fulfill this
-      requirement, the client may use :c:func:`VIDIOC_CREATE_BUFS` to add new
-      buffers.
-
-    In that case, the remaining steps do not apply and the client may resume
-    the decoding by one of the following actions:
-
-    * if the ``CAPTURE`` queue is streaming, call :c:func:`VIDIOC_DECODER_CMD`
-      with the ``V4L2_DEC_CMD_START`` command,
-
-    * if the ``CAPTURE`` queue is not streaming, call :c:func:`VIDIOC_STREAMON`
-      on the ``CAPTURE`` queue.
-
-    However, if the client intends to change the buffer set, to lower
-    memory usage or for any other reasons, it may be achieved by following
-    the steps below.
-
-7.  **If the** ``CAPTURE`` **queue is streaming,** keep queuing and dequeuing
-    buffers on the ``CAPTURE`` queue until a buffer marked with the
-    ``V4L2_BUF_FLAG_LAST`` flag is dequeued.
-
-8.  **If the** ``CAPTURE`` **queue is streaming,** call :c:func:`VIDIOC_STREAMOFF`
-    on the ``CAPTURE`` queue to stop streaming.
-
-    .. warning::
-
-       The ``OUTPUT`` queue must remain streaming. Calling
-       :c:func:`VIDIOC_STREAMOFF` on it would abort the sequence and trigger a
-       seek.
-
-9.  **If the** ``CAPTURE`` **queue has buffers allocated,** free the ``CAPTURE``
-    buffers using :c:func:`VIDIOC_REQBUFS`.
-
-    * **Required fields:**
-
-      ``count``
-          set to 0.
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-      ``memory``
-          follows standard semantics.
-
-10. Allocate ``CAPTURE`` buffers via :c:func:`VIDIOC_REQBUFS` on the
-    ``CAPTURE`` queue.
-
-    * **Required fields:**
-
-      ``count``
-          requested number of buffers to allocate; greater than zero.
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-      ``memory``
-          follows standard semantics.
-
-    * **Return fields:**
-
-      ``count``
-          actual number of buffers allocated.
-
-    .. warning::
-
-       The actual number of allocated buffers may differ from the ``count``
-       given. The client must check the updated value of ``count`` after the
-       call returns.
-
-    .. note::
-
-       To allocate more than the minimum number of buffers (for pipeline
-       depth), the client may query the ``V4L2_CID_MIN_BUFFERS_FOR_CAPTURE``
-       control to get the minimum number of buffers required, and pass the
-       obtained value plus the number of additional buffers needed in the
-       ``count`` field to :c:func:`VIDIOC_REQBUFS`.
-
-    Alternatively, :c:func:`VIDIOC_CREATE_BUFS` on the ``CAPTURE`` queue can be
-    used to have more control over buffer allocation. For example, by
-    allocating buffers larger than the current ``CAPTURE`` format, future
-    resolution changes can be accommodated.
-
-    * **Required fields:**
-
-      ``count``
-          requested number of buffers to allocate; greater than zero.
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-      ``memory``
-          follows standard semantics.
-
-      ``format``
-          a format representing the maximum framebuffer resolution to be
-          accommodated by newly allocated buffers.
-
-    * **Return fields:**
-
-      ``count``
-          adjusted to the number of allocated buffers.
-
-    .. warning::
-
-        The actual number of allocated buffers may differ from the ``count``
-        given. The client must check the updated value of ``count`` after the
-        call returns.
-
-    .. note::
-
-       To allocate buffers for a format different than parsed from the stream
-       metadata, the client must proceed as follows, before the metadata
-       parsing is initiated:
-
-       * set width and height of the ``OUTPUT`` format to desired coded resolution to
-         let the decoder configure the ``CAPTURE`` format appropriately,
-
-       * query the ``CAPTURE`` format using :c:func:`VIDIOC_G_FMT` and save it
-         until this step.
-
-       The format obtained in the query may be then used with
-       :c:func:`VIDIOC_CREATE_BUFS` in this step to allocate the buffers.
-
-11. Call :c:func:`VIDIOC_STREAMON` on the ``CAPTURE`` queue to start decoding
-    frames.
-
-Decoding
-========
-
-This state is reached after the `Capture Setup` sequence finishes successfully.
-In this state, the client queues and dequeues buffers to both queues via
-:c:func:`VIDIOC_QBUF` and :c:func:`VIDIOC_DQBUF`, following the standard
-semantics.
-
-The content of the source ``OUTPUT`` buffers depends on the active coded pixel
-format and may be affected by codec-specific extended controls, as stated in
-the documentation of each format.
-
-Both queues operate independently, following the standard behavior of V4L2
-buffer queues and memory-to-memory devices. In addition, the order of decoded
-frames dequeued from the ``CAPTURE`` queue may differ from the order of queuing
-coded frames to the ``OUTPUT`` queue, due to properties of the selected coded
-format, e.g. frame reordering.
-
-The client must not assume any direct relationship between ``CAPTURE``
-and ``OUTPUT`` buffers and any specific timing of buffers becoming
-available to dequeue. Specifically:
-
-* a buffer queued to ``OUTPUT`` may result in no buffers being produced
-  on ``CAPTURE`` (e.g. if it does not contain encoded data, or if only
-  metadata syntax structures are present in it),
-
-* a buffer queued to ``OUTPUT`` may result in more than one buffer produced
-  on ``CAPTURE`` (if the encoded data contained more than one frame, or if
-  returning a decoded frame allowed the decoder to return a frame that
-  preceded it in decode, but succeeded it in the display order),
-
-* a buffer queued to ``OUTPUT`` may result in a buffer being produced on
-  ``CAPTURE`` later into decode process, and/or after processing further
-  ``OUTPUT`` buffers, or be returned out of order, e.g. if display
-  reordering is used,
-
-* buffers may become available on the ``CAPTURE`` queue without additional
-  buffers queued to ``OUTPUT`` (e.g. during drain or ``EOS``), because of the
-  ``OUTPUT`` buffers queued in the past whose decoding results are only
-  available at later time, due to specifics of the decoding process.
-
-.. note::
-
-   To allow matching decoded ``CAPTURE`` buffers with ``OUTPUT`` buffers they
-   originated from, the client can set the ``timestamp`` field of the
-   :c:type:`v4l2_buffer` struct when queuing an ``OUTPUT`` buffer. The
-   ``CAPTURE`` buffer(s), which resulted from decoding that ``OUTPUT`` buffer
-   will have their ``timestamp`` field set to the same value when dequeued.
-
-   In addition to the straightforward case of one ``OUTPUT`` buffer producing
-   one ``CAPTURE`` buffer, the following cases are defined:
-
-   * one ``OUTPUT`` buffer generates multiple ``CAPTURE`` buffers: the same
-     ``OUTPUT`` timestamp will be copied to multiple ``CAPTURE`` buffers.
-
-   * multiple ``OUTPUT`` buffers generate one ``CAPTURE`` buffer: timestamp of
-     the ``OUTPUT`` buffer queued first will be copied.
-
-   * the decoding order differs from the display order (i.e. the ``CAPTURE``
-     buffers are out-of-order compared to the ``OUTPUT`` buffers): ``CAPTURE``
-     timestamps will not retain the order of ``OUTPUT`` timestamps.
-
-During the decoding, the decoder may initiate one of the special sequences, as
-listed below. The sequences will result in the decoder returning all the
-``CAPTURE`` buffers that originated from all the ``OUTPUT`` buffers processed
-before the sequence started. Last of the buffers will have the
-``V4L2_BUF_FLAG_LAST`` flag set. To determine the sequence to follow, the client
-must check if there is any pending event and:
-
-* if a ``V4L2_EVENT_SOURCE_CHANGE`` event with ``changes`` set to
-  ``V4L2_EVENT_SRC_CH_RESOLUTION`` is pending, the `Dynamic Resolution
-  Change` sequence needs to be followed,
-
-* if a ``V4L2_EVENT_EOS`` event is pending, the `End of Stream` sequence needs
-  to be followed.
-
-Some of the sequences can be intermixed with each other and need to be handled
-as they happen. The exact operation is documented for each sequence.
-
-Should a decoding error occur, it will be reported to the client with the level
-of details depending on the decoder capabilities. Specifically:
-
-* the CAPTURE buffer that contains the results of the failed decode operation
-  will be returned with the V4L2_BUF_FLAG_ERROR flag set,
-
-* if the decoder is able to precisely report the OUTPUT buffer that triggered
-  the error, such buffer will be returned with the V4L2_BUF_FLAG_ERROR flag
-  set.
-
-In case of a fatal failure that does not allow the decoding to continue, any
-further operations on corresponding decoder file handle will return the -EIO
-error code. The client may close the file handle and open a new one, or
-alternatively reinitialize the instance by stopping streaming on both queues,
-releasing all buffers and performing the Initialization sequence again.
-
-Seek
-====
-
-Seek is controlled by the ``OUTPUT`` queue, as it is the source of coded data.
-The seek does not require any specific operation on the ``CAPTURE`` queue, but
-it may be affected as per normal decoder operation.
-
-1. Stop the ``OUTPUT`` queue to begin the seek sequence via
-   :c:func:`VIDIOC_STREAMOFF`.
-
-   * **Required fields:**
-
-     ``type``
-         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
-
-   * The decoder will drop all the pending ``OUTPUT`` buffers and they must be
-     treated as returned to the client (following standard semantics).
-
-2. Restart the ``OUTPUT`` queue via :c:func:`VIDIOC_STREAMON`
-
-   * **Required fields:**
-
-     ``type``
-         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
-
-   * The decoder will start accepting new source bytestream buffers after the
-     call returns.
-
-3. Start queuing buffers containing coded data after the seek to the ``OUTPUT``
-   queue until a suitable resume point is found.
-
-   .. note::
-
-      There is no requirement to begin queuing coded data starting exactly
-      from a resume point (e.g. SPS or a keyframe). Any queued ``OUTPUT``
-      buffers will be processed and returned to the client until a suitable
-      resume point is found.  While looking for a resume point, the decoder
-      should not produce any decoded frames into ``CAPTURE`` buffers.
-
-      Some hardware is known to mishandle seeks to a non-resume point. Such an
-      operation may result in an unspecified number of corrupted decoded frames
-      being made available on the ``CAPTURE`` queue. Drivers must ensure that
-      no fatal decoding errors or crashes occur, and implement any necessary
-      handling and workarounds for hardware issues related to seek operations.
-
-   .. warning::
-
-      In case of the H.264/HEVC codec, the client must take care not to seek
-      over a change of SPS/PPS. Even though the target frame could be a
-      keyframe, the stale SPS/PPS inside decoder state would lead to undefined
-      results when decoding. Although the decoder must handle that case without
-      a crash or a fatal decode error, the client must not expect a sensible
-      decode output.
-
-      If the hardware can detect such corrupted decoded frames, then
-      corresponding buffers will be returned to the client with the
-      V4L2_BUF_FLAG_ERROR set. See the `Decoding` section for further
-      description of decode error reporting.
-
-4. After a resume point is found, the decoder will start returning ``CAPTURE``
-   buffers containing decoded frames.
-
-.. important::
-
-   A seek may result in the `Dynamic Resolution Change` sequence being
-   initiated, due to the seek target having decoding parameters different from
-   the part of the stream decoded before the seek. The sequence must be handled
-   as per normal decoder operation.
-
-.. warning::
-
-   It is not specified when the ``CAPTURE`` queue starts producing buffers
-   containing decoded data from the ``OUTPUT`` buffers queued after the seek,
-   as it operates independently from the ``OUTPUT`` queue.
-
-   The decoder may return a number of remaining ``CAPTURE`` buffers containing
-   decoded frames originating from the ``OUTPUT`` buffers queued before the
-   seek sequence is performed.
-
-   The ``VIDIOC_STREAMOFF`` operation discards any remaining queued
-   ``OUTPUT`` buffers, which means that not all of the ``OUTPUT`` buffers
-   queued before the seek sequence may have matching ``CAPTURE`` buffers
-   produced.  For example, given the sequence of operations on the
-   ``OUTPUT`` queue:
-
-     QBUF(A), QBUF(B), STREAMOFF(), STREAMON(), QBUF(G), QBUF(H),
-
-   any of the following results on the ``CAPTURE`` queue is allowed:
-
-     {A’, B’, G’, H’}, {A’, G’, H’}, {G’, H’}.
-
-   To determine the CAPTURE buffer containing the first decoded frame after the
-   seek, the client may observe the timestamps to match the CAPTURE and OUTPUT
-   buffers or use V4L2_DEC_CMD_STOP and V4L2_DEC_CMD_START to drain the
-   decoder.
-
-.. note::
-
-   To achieve instantaneous seek, the client may restart streaming on the
-   ``CAPTURE`` queue too to discard decoded, but not yet dequeued buffers.
-
-Dynamic Resolution Change
-=========================
-
-Streams that include resolution metadata in the bytestream may require switching
-to a different resolution during the decoding.
-
-.. note::
-
-   Not all decoders can detect resolution changes. Those that do set the
-   ``V4L2_FMT_FLAG_DYN_RESOLUTION`` flag for the coded format when
-   :c:func:`VIDIOC_ENUM_FMT` is called.
-
-The sequence starts when the decoder detects a coded frame with one or more of
-the following parameters different from those previously established (and
-reflected by corresponding queries):
-
-* coded resolution (``OUTPUT`` width and height),
-
-* visible resolution (selection rectangles),
-
-* the minimum number of buffers needed for decoding.
-
-Whenever that happens, the decoder must proceed as follows:
-
-1.  After encountering a resolution change in the stream, the decoder sends a
-    ``V4L2_EVENT_SOURCE_CHANGE`` event with ``changes`` set to
-    ``V4L2_EVENT_SRC_CH_RESOLUTION``.
-
-    .. important::
-
-       Any client query issued after the decoder queues the event will return
-       values applying to the stream after the resolution change, including
-       queue formats, selection rectangles and controls.
-
-2.  The decoder will then process and decode all remaining buffers from before
-    the resolution change point.
-
-    * The last buffer from before the change must be marked with the
-      ``V4L2_BUF_FLAG_LAST`` flag, similarly to the `Drain` sequence above.
-
-    .. warning::
-
-       The last buffer may be empty (with :c:type:`v4l2_buffer` ``bytesused``
-       = 0) and in that case it must be ignored by the client, as it does not
-       contain a decoded frame.
-
-    .. note::
-
-       Any attempt to dequeue more ``CAPTURE`` buffers beyond the buffer marked
-       with ``V4L2_BUF_FLAG_LAST`` will result in a -EPIPE error from
-       :c:func:`VIDIOC_DQBUF`.
-
-The client must continue the sequence as described below to continue the
-decoding process.
-
-1.  Dequeue the source change event.
-
-    .. important::
-
-       A source change triggers an implicit decoder drain, similar to the
-       explicit `Drain` sequence. The decoder is stopped after it completes.
-       The decoding process must be resumed with either a pair of calls to
-       :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
-       ``CAPTURE`` queue, or a call to :c:func:`VIDIOC_DECODER_CMD` with the
-       ``V4L2_DEC_CMD_START`` command.
-
-2.  Continue with the `Capture Setup` sequence.
-
-.. note::
-
-   During the resolution change sequence, the ``OUTPUT`` queue must remain
-   streaming. Calling :c:func:`VIDIOC_STREAMOFF` on the ``OUTPUT`` queue would
-   abort the sequence and initiate a seek.
-
-   In principle, the ``OUTPUT`` queue operates separately from the ``CAPTURE``
-   queue and this remains true for the duration of the entire resolution change
-   sequence as well.
-
-   The client should, for best performance and simplicity, keep queuing/dequeuing
-   buffers to/from the ``OUTPUT`` queue even while processing this sequence.
-
-Drain
-=====
-
-To ensure that all queued ``OUTPUT`` buffers have been processed and related
-``CAPTURE`` buffers are given to the client, the client must follow the drain
-sequence described below. After the drain sequence ends, the client has
-received all decoded frames for all ``OUTPUT`` buffers queued before the
-sequence was started.
-
-1. Begin drain by issuing :c:func:`VIDIOC_DECODER_CMD`.
-
-   * **Required fields:**
-
-     ``cmd``
-         set to ``V4L2_DEC_CMD_STOP``.
-
-     ``flags``
-         set to 0.
-
-     ``pts``
-         set to 0.
-
-   .. warning::
-
-      The sequence can be only initiated if both ``OUTPUT`` and ``CAPTURE``
-      queues are streaming. For compatibility reasons, the call to
-      :c:func:`VIDIOC_DECODER_CMD` will not fail even if any of the queues is
-      not streaming, but at the same time it will not initiate the `Drain`
-      sequence and so the steps described below would not be applicable.
-
-2. Any ``OUTPUT`` buffers queued by the client before the
-   :c:func:`VIDIOC_DECODER_CMD` was issued will be processed and decoded as
-   normal. The client must continue to handle both queues independently,
-   similarly to normal decode operation. This includes:
-
-   * handling any operations triggered as a result of processing those buffers,
-     such as the `Dynamic Resolution Change` sequence, before continuing with
-     the drain sequence,
-
-   * queuing and dequeuing ``CAPTURE`` buffers, until a buffer marked with the
-     ``V4L2_BUF_FLAG_LAST`` flag is dequeued,
-
-     .. warning::
-
-        The last buffer may be empty (with :c:type:`v4l2_buffer`
-        ``bytesused`` = 0) and in that case it must be ignored by the client,
-        as it does not contain a decoded frame.
-
-     .. note::
-
-        Any attempt to dequeue more ``CAPTURE`` buffers beyond the buffer
-        marked with ``V4L2_BUF_FLAG_LAST`` will result in a -EPIPE error from
-        :c:func:`VIDIOC_DQBUF`.
-
-   * dequeuing processed ``OUTPUT`` buffers, until all the buffers queued
-     before the ``V4L2_DEC_CMD_STOP`` command are dequeued,
-
-   * dequeuing the ``V4L2_EVENT_EOS`` event, if the client subscribed to it.
-
-   .. note::
-
-      For backwards compatibility, the decoder will signal a ``V4L2_EVENT_EOS``
-      event when the last frame has been decoded and all frames are ready to be
-      dequeued. It is a deprecated behavior and the client must not rely on it.
-      The ``V4L2_BUF_FLAG_LAST`` buffer flag should be used instead.
-
-3. Once all the ``OUTPUT`` buffers queued before the ``V4L2_DEC_CMD_STOP`` call
-   are dequeued and the last ``CAPTURE`` buffer is dequeued, the decoder is
-   stopped and it will accept, but not process, any newly queued ``OUTPUT``
-   buffers until the client issues any of the following operations:
-
-   * ``V4L2_DEC_CMD_START`` - the decoder will not be reset and will resume
-     operation normally, with all the state from before the drain,
-
-   * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
-     ``CAPTURE`` queue - the decoder will resume the operation normally,
-     however any ``CAPTURE`` buffers still in the queue will be returned to the
-     client,
-
-   * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
-     ``OUTPUT`` queue - any pending source buffers will be returned to the
-     client and the `Seek` sequence will be triggered.
-
-.. note::
-
-   Once the drain sequence is initiated, the client needs to drive it to
-   completion, as described by the steps above, unless it aborts the process by
-   issuing :c:func:`VIDIOC_STREAMOFF` on any of the ``OUTPUT`` or ``CAPTURE``
-   queues.  The client is not allowed to issue ``V4L2_DEC_CMD_START`` or
-   ``V4L2_DEC_CMD_STOP`` again while the drain sequence is in progress and they
-   will fail with -EBUSY error code if attempted.
-
-   Although mandatory, the availability of decoder commands may be queried
-   using :c:func:`VIDIOC_TRY_DECODER_CMD`.
-
-End of Stream
-=============
-
-If the decoder encounters an end of stream marking in the stream, the decoder
-will initiate the `Drain` sequence, which the client must handle as described
-above, skipping the initial :c:func:`VIDIOC_DECODER_CMD`.
-
-Commit Points
-=============
-
-Setting formats and allocating buffers trigger changes in the behavior of the
-decoder.
-
-1. Setting the format on the ``OUTPUT`` queue may change the set of formats
-   supported/advertised on the ``CAPTURE`` queue. In particular, it also means
-   that the ``CAPTURE`` format may be reset and the client must not rely on the
-   previously set format being preserved.
-
-2. Enumerating formats on the ``CAPTURE`` queue always returns only formats
-   supported for the current ``OUTPUT`` format.
-
-3. Setting the format on the ``CAPTURE`` queue does not change the list of
-   formats available on the ``OUTPUT`` queue. An attempt to set a ``CAPTURE``
-   format that is not supported for the currently selected ``OUTPUT`` format
-   will result in the decoder adjusting the requested ``CAPTURE`` format to a
-   supported one.
-
-4. Enumerating formats on the ``OUTPUT`` queue always returns the full set of
-   supported coded formats, irrespectively of the current ``CAPTURE`` format.
-
-5. While buffers are allocated on any of the ``OUTPUT`` or ``CAPTURE`` queues,
-   the client must not change the format on the ``OUTPUT`` queue. Drivers will
-   return the -EBUSY error code for any such format change attempt.
-
-To summarize, setting formats and allocation must always start with the
-``OUTPUT`` queue and the ``OUTPUT`` queue is the master that governs the
-set of supported formats for the ``CAPTURE`` queue.
diff --git a/Documentation/media/uapi/v4l/dev-event.rst b/Documentation/media/uapi/v4l/dev-event.rst
deleted file mode 100644
index 6029101fe1d7..000000000000
--- a/Documentation/media/uapi/v4l/dev-event.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _event:
-
-***************
-Event Interface
-***************
-
-The V4L2 event interface provides a means for a user to get immediately
-notified on certain conditions taking place on a device. This might
-include start of frame or loss of signal events, for example. Changes in
-the value or state of a V4L2 control can also be reported through
-events.
-
-To receive events, the events the user is interested in first must be
-subscribed using the
-:ref:`VIDIOC_SUBSCRIBE_EVENT` ioctl. Once
-an event is subscribed, the events of subscribed types are dequeueable
-using the :ref:`VIDIOC_DQEVENT` ioctl. Events may be
-unsubscribed using VIDIOC_UNSUBSCRIBE_EVENT ioctl. The special event
-type V4L2_EVENT_ALL may be used to unsubscribe all the events the
-driver supports.
-
-The event subscriptions and event queues are specific to file handles.
-Subscribing an event on one file handle does not affect other file
-handles.
-
-The information on dequeueable events is obtained by using select or
-poll system calls on video devices. The V4L2 events use POLLPRI events
-on poll system call and exceptions on select system call.
-
-Starting with kernel 3.1 certain guarantees can be given with regards to
-events:
-
-1. Each subscribed event has its own internal dedicated event queue.
-   This means that flooding of one event type will not interfere with
-   other event types.
-
-2. If the internal event queue for a particular subscribed event becomes
-   full, then the oldest event in that queue will be dropped.
-
-3. Where applicable, certain event types can ensure that the payload of
-   the oldest event that is about to be dropped will be merged with the
-   payload of the next oldest event. Thus ensuring that no information
-   is lost, but only an intermediate step leading up to that
-   information. See the documentation for the event you want to
-   subscribe to whether this is applicable for that event or not.
diff --git a/Documentation/media/uapi/v4l/dev-mem2mem.rst b/Documentation/media/uapi/v4l/dev-mem2mem.rst
deleted file mode 100644
index 70953958cee6..000000000000
--- a/Documentation/media/uapi/v4l/dev-mem2mem.rst
+++ /dev/null
@@ -1,49 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _mem2mem:
-
-********************************
-Video Memory-To-Memory Interface
-********************************
-
-A V4L2 memory-to-memory device can compress, decompress, transform, or
-otherwise convert video data from one format into another format, in memory.
-Such memory-to-memory devices set the ``V4L2_CAP_VIDEO_M2M`` or
-``V4L2_CAP_VIDEO_M2M_MPLANE`` capability. Examples of memory-to-memory
-devices are codecs, scalers, deinterlacers or format converters (i.e.
-converting from YUV to RGB).
-
-A memory-to-memory video node acts just like a normal video node, but it
-supports both output (sending frames from memory to the hardware)
-and capture (receiving the processed frames from the hardware into
-memory) stream I/O. An application will have to setup the stream I/O for
-both sides and finally call :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`
-for both capture and output to start the hardware.
-
-Memory-to-memory devices function as a shared resource: you can
-open the video node multiple times, each application setting up their
-own properties that are local to the file handle, and each can use
-it independently from the others. The driver will arbitrate access to
-the hardware and reprogram it whenever another file handler gets access.
-This is different from the usual video node behavior where the video
-properties are global to the device (i.e. changing something through one
-file handle is visible through another file handle).
-
-One of the most common memory-to-memory device is the codec. Codecs
-are more complicated than most and require additional setup for
-their codec parameters. This is done through codec controls.
-See :ref:`mpeg-controls`. More details on how to use codec memory-to-memory
-devices are given in the following sections.
-
-.. toctree::
-    :maxdepth: 1
-
-    dev-decoder
-    dev-stateless-decoder
diff --git a/Documentation/media/uapi/v4l/dev-meta.rst b/Documentation/media/uapi/v4l/dev-meta.rst
deleted file mode 100644
index c5dbe882be65..000000000000
--- a/Documentation/media/uapi/v4l/dev-meta.rst
+++ /dev/null
@@ -1,74 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _metadata:
-
-******************
-Metadata Interface
-******************
-
-Metadata refers to any non-image data that supplements video frames with
-additional information. This may include statistics computed over the image,
-frame capture parameters supplied by the image source or device specific
-parameters for specifying how the device processes images. This interface is
-intended for transfer of metadata between the userspace and the hardware and
-control of that operation.
-
-The metadata interface is implemented on video device nodes. The device can be
-dedicated to metadata or can support both video and metadata as specified in its
-reported capabilities.
-
-Querying Capabilities
-=====================
-
-Device nodes supporting the metadata capture interface set the
-``V4L2_CAP_META_CAPTURE`` flag in the ``device_caps`` field of the
-:c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP`
-ioctl. That flag means the device can capture metadata to memory. Similarly,
-device nodes supporting metadata output interface set the
-``V4L2_CAP_META_OUTPUT`` flag in the ``device_caps`` field of
-:c:type:`v4l2_capability` structure. That flag means the device can read
-metadata from memory.
-
-At least one of the read/write or streaming I/O methods must be supported.
-
-
-Data Format Negotiation
-=======================
-
-The metadata device uses the :ref:`format` ioctls to select the capture format.
-The metadata buffer content format is bound to that selected format. In addition
-to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be
-supported as well.
-
-To use the :ref:`format` ioctls applications set the ``type`` field of the
-:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_META_CAPTURE`` or to
-``V4L2_BUF_TYPE_META_OUTPUT`` and use the :c:type:`v4l2_meta_format` ``meta``
-member of the ``fmt`` union as needed per the desired operation. Both drivers
-and applications must set the remainder of the :c:type:`v4l2_format` structure
-to 0.
-
-.. c:type:: v4l2_meta_format
-
-.. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}|
-
-.. flat-table:: struct v4l2_meta_format
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``dataformat``
-      - The data format, set by the application. This is a little endian
-        :ref:`four character code <v4l2-fourcc>`. V4L2 defines metadata formats
-        in :ref:`meta-formats`.
-    * - __u32
-      - ``buffersize``
-      - Maximum buffer size in bytes required for data. The value is set by the
-        driver.
diff --git a/Documentation/media/uapi/v4l/dev-osd.rst b/Documentation/media/uapi/v4l/dev-osd.rst
deleted file mode 100644
index d3ad67da6386..000000000000
--- a/Documentation/media/uapi/v4l/dev-osd.rst
+++ /dev/null
@@ -1,157 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _osd:
-
-******************************
-Video Output Overlay Interface
-******************************
-
-**Also known as On-Screen Display (OSD)**
-
-Some video output devices can overlay a framebuffer image onto the
-outgoing video signal. Applications can set up such an overlay using
-this interface, which borrows structures and ioctls of the
-:ref:`Video Overlay <overlay>` interface.
-
-The OSD function is accessible through the same character special file
-as the :ref:`Video Output <capture>` function.
-
-.. note::
-
-   The default function of such a ``/dev/video`` device is video
-   capturing or output. The OSD function is only available after calling
-   the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
-
-
-Querying Capabilities
-=====================
-
-Devices supporting the *Video Output Overlay* interface set the
-``V4L2_CAP_VIDEO_OUTPUT_OVERLAY`` flag in the ``capabilities`` field of
-struct :c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl.
-
-
-Framebuffer
-===========
-
-Contrary to the *Video Overlay* interface the framebuffer is normally
-implemented on the TV card and not the graphics card. On Linux it is
-accessible as a framebuffer device (``/dev/fbN``). Given a V4L2 device,
-applications can find the corresponding framebuffer device by calling
-the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` ioctl. It returns, amongst
-other information, the physical address of the framebuffer in the
-``base`` field of struct :c:type:`v4l2_framebuffer`.
-The framebuffer device ioctl ``FBIOGET_FSCREENINFO`` returns the same
-address in the ``smem_start`` field of struct
-struct :c:type:`fb_fix_screeninfo`. The ``FBIOGET_FSCREENINFO``
-ioctl and struct :c:type:`fb_fix_screeninfo` are defined in
-the ``linux/fb.h`` header file.
-
-The width and height of the framebuffer depends on the current video
-standard. A V4L2 driver may reject attempts to change the video standard
-(or any other ioctl which would imply a framebuffer size change) with an
-``EBUSY`` error code until all applications closed the framebuffer device.
-
-Example: Finding a framebuffer device for OSD
----------------------------------------------
-
-.. code-block:: c
-
-    #include <linux/fb.h>
-
-    struct v4l2_framebuffer fbuf;
-    unsigned int i;
-    int fb_fd;
-
-    if (-1 == ioctl(fd, VIDIOC_G_FBUF, &fbuf)) {
-	perror("VIDIOC_G_FBUF");
-	exit(EXIT_FAILURE);
-    }
-
-    for (i = 0; i < 30; i++) {
-	char dev_name[16];
-	struct fb_fix_screeninfo si;
-
-	snprintf(dev_name, sizeof(dev_name), "/dev/fb%u", i);
-
-	fb_fd = open(dev_name, O_RDWR);
-	if (-1 == fb_fd) {
-	    switch (errno) {
-	    case ENOENT: /* no such file */
-	    case ENXIO:  /* no driver */
-		continue;
-
-	    default:
-		perror("open");
-		exit(EXIT_FAILURE);
-	    }
-	}
-
-	if (0 == ioctl(fb_fd, FBIOGET_FSCREENINFO, &si)) {
-	    if (si.smem_start == (unsigned long)fbuf.base)
-		break;
-	} else {
-	    /* Apparently not a framebuffer device. */
-	}
-
-	close(fb_fd);
-	fb_fd = -1;
-    }
-
-    /* fb_fd is the file descriptor of the framebuffer device
-       for the video output overlay, or -1 if no device was found. */
-
-
-Overlay Window and Scaling
-==========================
-
-The overlay is controlled by source and target rectangles. The source
-rectangle selects a subsection of the framebuffer image to be overlaid,
-the target rectangle an area in the outgoing video signal where the
-image will appear. Drivers may or may not support scaling, and arbitrary
-sizes and positions of these rectangles. Further drivers may support any
-(or none) of the clipping/blending methods defined for the
-:ref:`Video Overlay <overlay>` interface.
-
-A struct :c:type:`v4l2_window` defines the size of the
-source rectangle, its position in the framebuffer and the
-clipping/blending method to be used for the overlay. To get the current
-parameters applications set the ``type`` field of a struct
-:c:type:`v4l2_format` to
-``V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY`` and call the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl. The driver fills the
-struct :c:type:`v4l2_window` substructure named ``win``. It is not
-possible to retrieve a previously programmed clipping list or bitmap.
-
-To program the source rectangle applications set the ``type`` field of a
-struct :c:type:`v4l2_format` to
-``V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY``, initialize the ``win``
-substructure and call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
-The driver adjusts the parameters against hardware limits and returns
-the actual parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does. Like :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`,
-the :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl can be used to learn
-about driver capabilities without actually changing driver state. Unlike
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` this also works after the overlay has been enabled.
-
-A struct :c:type:`v4l2_crop` defines the size and position
-of the target rectangle. The scaling factor of the overlay is implied by
-the width and height given in struct :c:type:`v4l2_window`
-and struct :c:type:`v4l2_crop`. The cropping API applies to
-*Video Output* and *Video Output Overlay* devices in the same way as to
-*Video Capture* and *Video Overlay* devices, merely reversing the
-direction of the data flow. For more information see :ref:`crop`.
-
-
-Enabling Overlay
-================
-
-There is no V4L2 ioctl to enable or disable the overlay, however the
-framebuffer interface of the driver may support the ``FBIOBLANK`` ioctl.
diff --git a/Documentation/media/uapi/v4l/dev-output.rst b/Documentation/media/uapi/v4l/dev-output.rst
deleted file mode 100644
index 3fe1b39696ed..000000000000
--- a/Documentation/media/uapi/v4l/dev-output.rst
+++ /dev/null
@@ -1,108 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _output:
-
-**********************
-Video Output Interface
-**********************
-
-Video output devices encode stills or image sequences as analog video
-signal. With this interface applications can control the encoding
-process and move images from user space to the driver.
-
-Conventionally V4L2 video output devices are accessed through character
-device special files named ``/dev/video`` and ``/dev/video0`` to
-``/dev/video63`` with major number 81 and minor numbers 0 to 63.
-``/dev/video`` is typically a symbolic link to the preferred video
-device.
-
-.. note:: The same device file names are used also for video capture devices.
-
-
-Querying Capabilities
-=====================
-
-Devices supporting the video output interface set the
-``V4L2_CAP_VIDEO_OUTPUT`` or ``V4L2_CAP_VIDEO_OUTPUT_MPLANE`` flag in
-the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. As secondary device
-functions they may also support the :ref:`raw VBI output <raw-vbi>`
-(``V4L2_CAP_VBI_OUTPUT``) interface. At least one of the read/write or
-streaming I/O methods must be supported. Modulators and audio outputs
-are optional.
-
-
-Supplemental Functions
-======================
-
-Video output devices shall support :ref:`audio output <audio>`,
-:ref:`modulator <tuner>`, :ref:`controls <control>`,
-:ref:`cropping and scaling <crop>` and
-:ref:`streaming parameter <streaming-par>` ioctls as needed. The
-:ref:`video output <video>` ioctls must be supported by all video
-output devices.
-
-
-Image Format Negotiation
-========================
-
-The output is determined by cropping and image format parameters. The
-former select an area of the video picture where the image will appear,
-the latter how images are stored in memory, i. e. in RGB or YUV format,
-the number of bits per pixel or width and height. Together they also
-define how images are scaled in the process.
-
-As usual these parameters are *not* reset at :ref:`open() <func-open>`
-time to permit Unix tool chains, programming a device and then writing
-to it as if it was a plain file. Well written V4L2 applications ensure
-they really get what they want, including cropping and scaling.
-
-Cropping initialization at minimum requires to reset the parameters to
-defaults. An example is given in :ref:`crop`.
-
-To query the current image format applications set the ``type`` field of
-a struct :c:type:`v4l2_format` to
-``V4L2_BUF_TYPE_VIDEO_OUTPUT`` or ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``
-and call the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl with a pointer
-to this structure. Drivers fill the struct
-:c:type:`v4l2_pix_format` ``pix`` or the struct
-:c:type:`v4l2_pix_format_mplane` ``pix_mp``
-member of the ``fmt`` union.
-
-To request different parameters applications set the ``type`` field of a
-struct :c:type:`v4l2_format` as above and initialize all
-fields of the struct :c:type:`v4l2_pix_format`
-``vbi`` member of the ``fmt`` union, or better just modify the results
-of :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, and call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
-ioctl with a pointer to this structure. Drivers may adjust the
-parameters and finally return the actual parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
-does.
-
-Like :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` the :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl
-can be used to learn about hardware limitations without disabling I/O or
-possibly time consuming hardware preparations.
-
-The contents of struct :c:type:`v4l2_pix_format` and
-struct :c:type:`v4l2_pix_format_mplane` are
-discussed in :ref:`pixfmt`. See also the specification of the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctls for
-details. Video output devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
-and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, even if :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ignores all
-requests and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does.
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional.
-
-
-Writing Images
-==============
-
-A video output device may support the :ref:`write() function <rw>`
-and/or streaming (:ref:`memory mapping <mmap>` or
-:ref:`user pointer <userp>`) I/O. See :ref:`io` for details.
diff --git a/Documentation/media/uapi/v4l/dev-overlay.rst b/Documentation/media/uapi/v4l/dev-overlay.rst
deleted file mode 100644
index b91b3837d4e7..000000000000
--- a/Documentation/media/uapi/v4l/dev-overlay.rst
+++ /dev/null
@@ -1,328 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _overlay:
-
-***********************
-Video Overlay Interface
-***********************
-
-**Also known as Framebuffer Overlay or Previewing.**
-
-Video overlay devices have the ability to genlock (TV-)video into the
-(VGA-)video signal of a graphics card, or to store captured images
-directly in video memory of a graphics card, typically with clipping.
-This can be considerable more efficient than capturing images and
-displaying them by other means. In the old days when only nuclear power
-plants needed cooling towers this used to be the only way to put live
-video into a window.
-
-Video overlay devices are accessed through the same character special
-files as :ref:`video capture <capture>` devices.
-
-.. note::
-
-   The default function of a ``/dev/video`` device is video
-   capturing. The overlay function is only available after calling
-   the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
-
-The driver may support simultaneous overlay and capturing using the
-read/write and streaming I/O methods. If so, operation at the nominal
-frame rate of the video standard is not guaranteed. Frames may be
-directed away from overlay to capture, or one field may be used for
-overlay and the other for capture if the capture parameters permit this.
-
-Applications should use different file descriptors for capturing and
-overlay. This must be supported by all drivers capable of simultaneous
-capturing and overlay. Optionally these drivers may also permit
-capturing and overlay with a single file descriptor for compatibility
-with V4L and earlier versions of V4L2. [#f1]_
-
-
-Querying Capabilities
-=====================
-
-Devices supporting the video overlay interface set the
-``V4L2_CAP_VIDEO_OVERLAY`` flag in the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. The overlay I/O
-method specified below must be supported. Tuners and audio inputs are
-optional.
-
-
-Supplemental Functions
-======================
-
-Video overlay devices shall support :ref:`audio input <audio>`,
-:ref:`tuner`, :ref:`controls <control>`,
-:ref:`cropping and scaling <crop>` and
-:ref:`streaming parameter <streaming-par>` ioctls as needed. The
-:ref:`video input <video>` and :ref:`video standard <standard>`
-ioctls must be supported by all video overlay devices.
-
-
-Setup
-=====
-
-Before overlay can commence applications must program the driver with
-frame buffer parameters, namely the address and size of the frame buffer
-and the image format, for example RGB 5:6:5. The
-:ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` and
-:ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctls are available to get and
-set these parameters, respectively. The :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctl is
-privileged because it allows to set up DMA into physical memory,
-bypassing the memory protection mechanisms of the kernel. Only the
-superuser can change the frame buffer address and size. Users are not
-supposed to run TV applications as root or with SUID bit set. A small
-helper application with suitable privileges should query the graphics
-system and program the V4L2 driver at the appropriate time.
-
-Some devices add the video overlay to the output signal of the graphics
-card. In this case the frame buffer is not modified by the video device,
-and the frame buffer address and pixel format are not needed by the
-driver. The :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctl is not privileged. An application
-can check for this type of device by calling the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`
-ioctl.
-
-A driver may support any (or none) of five clipping/blending methods:
-
-1. Chroma-keying displays the overlaid image only where pixels in the
-   primary graphics surface assume a certain color.
-
-2. A bitmap can be specified where each bit corresponds to a pixel in
-   the overlaid image. When the bit is set, the corresponding video
-   pixel is displayed, otherwise a pixel of the graphics surface.
-
-3. A list of clipping rectangles can be specified. In these regions *no*
-   video is displayed, so the graphics surface can be seen here.
-
-4. The framebuffer has an alpha channel that can be used to clip or
-   blend the framebuffer with the video.
-
-5. A global alpha value can be specified to blend the framebuffer
-   contents with video images.
-
-When simultaneous capturing and overlay is supported and the hardware
-prohibits different image and frame buffer formats, the format requested
-first takes precedence. The attempt to capture
-(:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`) or overlay
-(:ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`) may fail with an ``EBUSY`` error
-code or return accordingly modified parameters..
-
-
-Overlay Window
-==============
-
-The overlaid image is determined by cropping and overlay window
-parameters. The former select an area of the video picture to capture,
-the latter how images are overlaid and clipped. Cropping initialization
-at minimum requires to reset the parameters to defaults. An example is
-given in :ref:`crop`.
-
-The overlay window is described by a struct
-:c:type:`v4l2_window`. It defines the size of the image,
-its position over the graphics surface and the clipping to be applied.
-To get the current parameters applications set the ``type`` field of a
-struct :c:type:`v4l2_format` to
-``V4L2_BUF_TYPE_VIDEO_OVERLAY`` and call the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl. The driver fills the
-struct :c:type:`v4l2_window` substructure named ``win``. It is not
-possible to retrieve a previously programmed clipping list or bitmap.
-
-To program the overlay window applications set the ``type`` field of a
-struct :c:type:`v4l2_format` to
-``V4L2_BUF_TYPE_VIDEO_OVERLAY``, initialize the ``win`` substructure and
-call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. The driver
-adjusts the parameters against hardware limits and returns the actual
-parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does. Like :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`, the
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl can be used to learn
-about driver capabilities without actually changing driver state. Unlike
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` this also works after the overlay has been enabled.
-
-The scaling factor of the overlaid image is implied by the width and
-height given in struct :c:type:`v4l2_window` and the size
-of the cropping rectangle. For more information see :ref:`crop`.
-
-When simultaneous capturing and overlay is supported and the hardware
-prohibits different image and window sizes, the size requested first
-takes precedence. The attempt to capture or overlay as well
-(:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`) may fail with an ``EBUSY`` error
-code or return accordingly modified parameters.
-
-
-.. c:type:: v4l2_window
-
-struct v4l2_window
-------------------
-
-``struct v4l2_rect w``
-    Size and position of the window relative to the top, left corner of
-    the frame buffer defined with
-    :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`. The window can extend the
-    frame buffer width and height, the ``x`` and ``y`` coordinates can
-    be negative, and it can lie completely outside the frame buffer. The
-    driver clips the window accordingly, or if that is not possible,
-    modifies its size and/or position.
-
-``enum v4l2_field field``
-    Applications set this field to determine which video field shall be
-    overlaid, typically one of ``V4L2_FIELD_ANY`` (0),
-    ``V4L2_FIELD_TOP``, ``V4L2_FIELD_BOTTOM`` or
-    ``V4L2_FIELD_INTERLACED``. Drivers may have to choose a different
-    field order and return the actual setting here.
-
-``__u32 chromakey``
-    When chroma-keying has been negotiated with
-    :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` applications set this field
-    to the desired pixel value for the chroma key. The format is the
-    same as the pixel format of the framebuffer (struct
-    :c:type:`v4l2_framebuffer` ``fmt.pixelformat``
-    field), with bytes in host order. E. g. for
-    :ref:`V4L2_PIX_FMT_BGR24 <V4L2-PIX-FMT-BGR32>` the value should
-    be 0xRRGGBB on a little endian, 0xBBGGRR on a big endian host.
-
-``struct v4l2_clip * clips``
-    When chroma-keying has *not* been negotiated and
-    :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` indicated this capability,
-    applications can set this field to point to an array of clipping
-    rectangles.
-
-    Like the window coordinates w, clipping rectangles are defined
-    relative to the top, left corner of the frame buffer. However
-    clipping rectangles must not extend the frame buffer width and
-    height, and they must not overlap. If possible applications
-    should merge adjacent rectangles. Whether this must create
-    x-y or y-x bands, or the order of rectangles, is not defined. When
-    clip lists are not supported the driver ignores this field. Its
-    contents after calling :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
-    are undefined.
-
-``__u32 clipcount``
-    When the application set the ``clips`` field, this field must
-    contain the number of clipping rectangles in the list. When clip
-    lists are not supported the driver ignores this field, its contents
-    after calling :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` are undefined. When clip lists are
-    supported but no clipping is desired this field must be set to zero.
-
-``void * bitmap``
-    When chroma-keying has *not* been negotiated and
-    :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` indicated this capability,
-    applications can set this field to point to a clipping bit mask.
-
-It must be of the same size as the window, ``w.width`` and ``w.height``.
-Each bit corresponds to a pixel in the overlaid image, which is
-displayed only when the bit is *set*. Pixel coordinates translate to
-bits like:
-
-
-.. code-block:: c
-
-    ((__u8 *) bitmap)[w.width * y + x / 8] & (1 << (x & 7))
-
-where ``0`` ≤ x < ``w.width`` and ``0`` ≤ y <``w.height``. [#f2]_
-
-When a clipping bit mask is not supported the driver ignores this field,
-its contents after calling :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` are
-undefined. When a bit mask is supported but no clipping is desired this
-field must be set to ``NULL``.
-
-Applications need not create a clip list or bit mask. When they pass
-both, or despite negotiating chroma-keying, the results are undefined.
-Regardless of the chosen method, the clipping abilities of the hardware
-may be limited in quantity or quality. The results when these limits are
-exceeded are undefined. [#f3]_
-
-``__u8 global_alpha``
-    The global alpha value used to blend the framebuffer with video
-    images, if global alpha blending has been negotiated
-    (``V4L2_FBUF_FLAG_GLOBAL_ALPHA``, see
-    :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`,
-    :ref:`framebuffer-flags`).
-
-.. note::
-
-   This field was added in Linux 2.6.23, extending the
-   structure. However the :ref:`VIDIOC_[G|S|TRY]_FMT <VIDIOC_G_FMT>`
-   ioctls, which take a pointer to a :c:type:`v4l2_format`
-   parent structure with padding bytes at the end, are not affected.
-
-
-.. c:type:: v4l2_clip
-
-struct v4l2_clip [#f4]_
------------------------
-
-``struct v4l2_rect c``
-    Coordinates of the clipping rectangle, relative to the top, left
-    corner of the frame buffer. Only window pixels *outside* all
-    clipping rectangles are displayed.
-
-``struct v4l2_clip * next``
-    Pointer to the next clipping rectangle, ``NULL`` when this is the last
-    rectangle. Drivers ignore this field, it cannot be used to pass a
-    linked list of clipping rectangles.
-
-
-.. c:type:: v4l2_rect
-
-struct v4l2_rect
-----------------
-
-``__s32 left``
-    Horizontal offset of the top, left corner of the rectangle, in
-    pixels.
-
-``__s32 top``
-    Vertical offset of the top, left corner of the rectangle, in pixels.
-    Offsets increase to the right and down.
-
-``__u32 width``
-    Width of the rectangle, in pixels.
-
-``__u32 height``
-    Height of the rectangle, in pixels.
-
-
-Enabling Overlay
-================
-
-To start or stop the frame buffer overlay applications call the
-:ref:`VIDIOC_OVERLAY` ioctl.
-
-.. [#f1]
-   A common application of two file descriptors is the XFree86
-   :ref:`Xv/V4L <xvideo>` interface driver and a V4L2 application.
-   While the X server controls video overlay, the application can take
-   advantage of memory mapping and DMA.
-
-   In the opinion of the designers of this API, no driver writer taking
-   the efforts to support simultaneous capturing and overlay will
-   restrict this ability by requiring a single file descriptor, as in
-   V4L and earlier versions of V4L2. Making this optional means
-   applications depending on two file descriptors need backup routines
-   to be compatible with all drivers, which is considerable more work
-   than using two fds in applications which do not. Also two fd's fit
-   the general concept of one file descriptor for each logical stream.
-   Hence as a complexity trade-off drivers *must* support two file
-   descriptors and *may* support single fd operation.
-
-.. [#f2]
-   Should we require ``w.width`` to be a multiple of eight?
-
-.. [#f3]
-   When the image is written into frame buffer memory it will be
-   undesirable if the driver clips out less pixels than expected,
-   because the application and graphics system are not aware these
-   regions need to be refreshed. The driver should clip out more pixels
-   or not write the image at all.
-
-.. [#f4]
-   The X Window system defines "regions" which are vectors of ``struct
-   BoxRec { short x1, y1, x2, y2; }`` with ``width = x2 - x1`` and
-   ``height = y2 - y1``, so one cannot pass X11 clip lists directly.
diff --git a/Documentation/media/uapi/v4l/dev-radio.rst b/Documentation/media/uapi/v4l/dev-radio.rst
deleted file mode 100644
index 133eb0e788c2..000000000000
--- a/Documentation/media/uapi/v4l/dev-radio.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _radio:
-
-***************
-Radio Interface
-***************
-
-This interface is intended for AM and FM (analog) radio receivers and
-transmitters.
-
-Conventionally V4L2 radio devices are accessed through character device
-special files named ``/dev/radio`` and ``/dev/radio0`` to
-``/dev/radio63`` with major number 81 and minor numbers 64 to 127.
-
-
-Querying Capabilities
-=====================
-
-Devices supporting the radio interface set the ``V4L2_CAP_RADIO`` and
-``V4L2_CAP_TUNER`` or ``V4L2_CAP_MODULATOR`` flag in the
-``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. Other combinations of
-capability flags are reserved for future extensions.
-
-
-Supplemental Functions
-======================
-
-Radio devices can support :ref:`controls <control>`, and must support
-the :ref:`tuner or modulator <tuner>` ioctls.
-
-They do not support the video input or output, audio input or output,
-video standard, cropping and scaling, compression and streaming
-parameter, or overlay ioctls. All other ioctls and I/O methods are
-reserved for future extensions.
-
-
-Programming
-===========
-
-Radio devices may have a couple audio controls (as discussed in
-:ref:`control`) such as a volume control, possibly custom controls.
-Further all radio devices have one tuner or modulator (these are
-discussed in :ref:`tuner`) with index number zero to select the radio
-frequency and to determine if a monaural or FM stereo program is
-received/emitted. Drivers switch automatically between AM and FM
-depending on the selected frequency. The
-:ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>` or
-:ref:`VIDIOC_G_MODULATOR <VIDIOC_G_MODULATOR>` ioctl reports the
-supported frequency range.
diff --git a/Documentation/media/uapi/v4l/dev-raw-vbi.rst b/Documentation/media/uapi/v4l/dev-raw-vbi.rst
deleted file mode 100644
index e06b03ca2ab2..000000000000
--- a/Documentation/media/uapi/v4l/dev-raw-vbi.rst
+++ /dev/null
@@ -1,306 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _raw-vbi:
-
-**********************
-Raw VBI Data Interface
-**********************
-
-VBI is an abbreviation of Vertical Blanking Interval, a gap in the
-sequence of lines of an analog video signal. During VBI no picture
-information is transmitted, allowing some time while the electron beam
-of a cathode ray tube TV returns to the top of the screen. Using an
-oscilloscope you will find here the vertical synchronization pulses and
-short data packages ASK modulated [#f1]_ onto the video signal. These are
-transmissions of services such as Teletext or Closed Caption.
-
-Subject of this interface type is raw VBI data, as sampled off a video
-signal, or to be added to a signal for output. The data format is
-similar to uncompressed video images, a number of lines times a number
-of samples per line, we call this a VBI image.
-
-Conventionally V4L2 VBI devices are accessed through character device
-special files named ``/dev/vbi`` and ``/dev/vbi0`` to ``/dev/vbi31``
-with major number 81 and minor numbers 224 to 255. ``/dev/vbi`` is
-typically a symbolic link to the preferred VBI device. This convention
-applies to both input and output devices.
-
-To address the problems of finding related video and VBI devices VBI
-capturing and output is also available as device function under
-``/dev/video``. To capture or output raw VBI data with these devices
-applications must call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
-Accessed as ``/dev/vbi``, raw VBI capturing or output is the default
-device function.
-
-
-Querying Capabilities
-=====================
-
-Devices supporting the raw VBI capturing or output API set the
-``V4L2_CAP_VBI_CAPTURE`` or ``V4L2_CAP_VBI_OUTPUT`` flags, respectively,
-in the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. At least one of the
-read/write, streaming or asynchronous I/O methods must be supported. VBI
-devices may or may not have a tuner or modulator.
-
-
-Supplemental Functions
-======================
-
-VBI devices shall support :ref:`video input or output <video>`,
-:ref:`tuner or modulator <tuner>`, and :ref:`controls <control>`
-ioctls as needed. The :ref:`video standard <standard>` ioctls provide
-information vital to program a VBI device, therefore must be supported.
-
-
-Raw VBI Format Negotiation
-==========================
-
-Raw VBI sampling abilities can vary, in particular the sampling
-frequency. To properly interpret the data V4L2 specifies an ioctl to
-query the sampling parameters. Moreover, to allow for some flexibility
-applications can also suggest different parameters.
-
-As usual these parameters are *not* reset at :ref:`open() <func-open>`
-time to permit Unix tool chains, programming a device and then reading
-from it as if it was a plain file. Well written V4L2 applications should
-always ensure they really get what they want, requesting reasonable
-parameters and then checking if the actual parameters are suitable.
-
-To query the current raw VBI capture parameters applications set the
-``type`` field of a struct :c:type:`v4l2_format` to
-``V4L2_BUF_TYPE_VBI_CAPTURE`` or ``V4L2_BUF_TYPE_VBI_OUTPUT``, and call
-the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl with a pointer to this
-structure. Drivers fill the struct
-:c:type:`v4l2_vbi_format` ``vbi`` member of the
-``fmt`` union.
-
-To request different parameters applications set the ``type`` field of a
-struct :c:type:`v4l2_format` as above and initialize all
-fields of the struct :c:type:`v4l2_vbi_format`
-``vbi`` member of the ``fmt`` union, or better just modify the results
-of :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, and call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
-ioctl with a pointer to this structure. Drivers return an ``EINVAL`` error
-code only when the given parameters are ambiguous, otherwise they modify
-the parameters according to the hardware capabilities and return the
-actual parameters. When the driver allocates resources at this point, it
-may return an ``EBUSY`` error code to indicate the returned parameters are
-valid but the required resources are currently not available. That may
-happen for instance when the video and VBI areas to capture would
-overlap, or when the driver supports multiple opens and another process
-already requested VBI capturing or output. Anyway, applications must
-expect other resource allocation points which may return ``EBUSY``, at the
-:ref:`VIDIOC_STREAMON` ioctl and the first :ref:`read() <func-read>`
-, :ref:`write() <func-write>` and :ref:`select() <func-select>` calls.
-
-VBI devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, even if :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ignores all requests
-and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does.
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional.
-
-.. tabularcolumns:: |p{1.6cm}|p{4.2cm}|p{11.7cm}|
-
-.. c:type:: v4l2_vbi_format
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_vbi_format
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``sampling_rate``
-      - Samples per second, i. e. unit 1 Hz.
-    * - __u32
-      - ``offset``
-      - Horizontal offset of the VBI image, relative to the leading edge
-	of the line synchronization pulse and counted in samples: The
-	first sample in the VBI image will be located ``offset`` /
-	``sampling_rate`` seconds following the leading edge. See also
-	:ref:`vbi-hsync`.
-    * - __u32
-      - ``samples_per_line``
-      -
-    * - __u32
-      - ``sample_format``
-      - Defines the sample format as in :ref:`pixfmt`, a
-	four-character-code. [#f2]_ Usually this is ``V4L2_PIX_FMT_GREY``,
-	i. e. each sample consists of 8 bits with lower values oriented
-	towards the black level. Do not assume any other correlation of
-	values with the signal level. For example, the MSB does not
-	necessarily indicate if the signal is 'high' or 'low' because 128
-	may not be the mean value of the signal. Drivers shall not convert
-	the sample format by software.
-    * - __u32
-      - ``start``\ [#f2]_
-      - This is the scanning system line number associated with the first
-	line of the VBI image, of the first and the second field
-	respectively. See :ref:`vbi-525` and :ref:`vbi-625` for valid
-	values. The ``V4L2_VBI_ITU_525_F1_START``,
-	``V4L2_VBI_ITU_525_F2_START``, ``V4L2_VBI_ITU_625_F1_START`` and
-	``V4L2_VBI_ITU_625_F2_START`` defines give the start line numbers
-	for each field for each 525 or 625 line format as a convenience.
-	Don't forget that ITU line numbering starts at 1, not 0. VBI input
-	drivers can return start values 0 if the hardware cannot reliable
-	identify scanning lines, VBI acquisition may not require this
-	information.
-    * - __u32
-      - ``count``\ [#f2]_
-      - The number of lines in the first and second field image,
-	respectively.
-    * - :cspan:`2`
-
-	Drivers should be as flexibility as possible. For example, it may
-	be possible to extend or move the VBI capture window down to the
-	picture area, implementing a 'full field mode' to capture data
-	service transmissions embedded in the picture.
-
-	An application can set the first or second ``count`` value to zero
-	if no data is required from the respective field; ``count``\ [1]
-	if the scanning system is progressive, i. e. not interlaced. The
-	corresponding start value shall be ignored by the application and
-	driver. Anyway, drivers may not support single field capturing and
-	return both count values non-zero.
-
-	Both ``count`` values set to zero, or line numbers are outside the
-	bounds depicted\ [#f4]_, or a field image covering lines of two
-	fields, are invalid and shall not be returned by the driver.
-
-	To initialize the ``start`` and ``count`` fields, applications
-	must first determine the current video standard selection. The
-	:ref:`v4l2_std_id <v4l2-std-id>` or the ``framelines`` field
-	of struct :c:type:`v4l2_standard` can be evaluated
-	for this purpose.
-    * - __u32
-      - ``flags``
-      - See :ref:`vbifmt-flags` below. Currently only drivers set flags,
-	applications must set this field to zero.
-    * - __u32
-      - ``reserved``\ [#f2]_
-      - This array is reserved for future extensions. Drivers and
-	applications must set it to zero.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{1.5cm}|p{11.6cm}|
-
-.. _vbifmt-flags:
-
-.. flat-table:: Raw VBI Format Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_VBI_UNSYNC``
-      - 0x0001
-      - This flag indicates hardware which does not properly distinguish
-	between fields. Normally the VBI image stores the first field
-	(lower scanning line numbers) first in memory. This may be a top
-	or bottom field depending on the video standard. When this flag is
-	set the first or second field may be stored first, however the
-	fields are still in correct temporal order with the older field
-	first in memory. [#f3]_
-    * - ``V4L2_VBI_INTERLACED``
-      - 0x0002
-      - By default the two field images will be passed sequentially; all
-	lines of the first field followed by all lines of the second field
-	(compare :ref:`field-order` ``V4L2_FIELD_SEQ_TB`` and
-	``V4L2_FIELD_SEQ_BT``, whether the top or bottom field is first in
-	memory depends on the video standard). When this flag is set, the
-	two fields are interlaced (cf. ``V4L2_FIELD_INTERLACED``). The
-	first line of the first field followed by the first line of the
-	second field, then the two second lines, and so on. Such a layout
-	may be necessary when the hardware has been programmed to capture
-	or output interlaced video images and is unable to separate the
-	fields for VBI capturing at the same time. For simplicity setting
-	this flag implies that both ``count`` values are equal and
-	non-zero.
-
-
-
-.. _vbi-hsync:
-
-.. kernel-figure:: vbi_hsync.svg
-    :alt:   vbi_hsync.svg
-    :align: center
-
-    **Figure 4.1. Line synchronization**
-
-
-.. _vbi-525:
-
-.. kernel-figure:: vbi_525.svg
-    :alt:   vbi_525.svg
-    :align: center
-
-    **Figure 4.2. ITU-R 525 line numbering (M/NTSC and M/PAL)**
-
-.. _vbi-625:
-
-.. kernel-figure:: vbi_625.svg
-    :alt:   vbi_625.svg
-    :align: center
-
-    **Figure 4.3. ITU-R 625 line numbering**
-
-Remember the VBI image format depends on the selected video standard,
-therefore the application must choose a new standard or query the
-current standard first. Attempts to read or write data ahead of format
-negotiation, or after switching the video standard which may invalidate
-the negotiated VBI parameters, should be refused by the driver. A format
-change during active I/O is not permitted.
-
-
-Reading and writing VBI images
-==============================
-
-To assure synchronization with the field number and easier
-implementation, the smallest unit of data passed at a time is one frame,
-consisting of two fields of VBI images immediately following in memory.
-
-The total size of a frame computes as follows:
-
-
-.. code-block:: c
-
-    (count[0] + count[1]) * samples_per_line * sample size in bytes
-
-The sample size is most likely always one byte, applications must check
-the ``sample_format`` field though, to function properly with other
-drivers.
-
-A VBI device may support :ref:`read/write <rw>` and/or streaming
-(:ref:`memory mapping <mmap>` or :ref:`user pointer <userp>`) I/O.
-The latter bears the possibility of synchronizing video and VBI data by
-using buffer timestamps.
-
-Remember the :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` ioctl and the
-first :ref:`read() <func-read>`, :ref:`write() <func-write>` and
-:ref:`select() <func-select>` call can be resource allocation
-points returning an ``EBUSY`` error code if the required hardware resources
-are temporarily unavailable, for example the device is already in use by
-another process.
-
-.. [#f1]
-   ASK: Amplitude-Shift Keying. A high signal level represents a '1'
-   bit, a low level a '0' bit.
-
-.. [#f2]
-   A few devices may be unable to sample VBI data at all but can extend
-   the video capture window to the VBI region.
-
-.. [#f3]
-   Most VBI services transmit on both fields, but some have different
-   semantics depending on the field number. These cannot be reliable
-   decoded or encoded when ``V4L2_VBI_UNSYNC`` is set.
-
-.. [#f4]
-   The valid values ar shown at :ref:`vbi-525` and :ref:`vbi-625`.
diff --git a/Documentation/media/uapi/v4l/dev-rds.rst b/Documentation/media/uapi/v4l/dev-rds.rst
deleted file mode 100644
index 64a724ef58f5..000000000000
--- a/Documentation/media/uapi/v4l/dev-rds.rst
+++ /dev/null
@@ -1,191 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _rds:
-
-*************
-RDS Interface
-*************
-
-The Radio Data System transmits supplementary information in binary
-format, for example the station name or travel information, on an
-inaudible audio subcarrier of a radio program. This interface is aimed
-at devices capable of receiving and/or transmitting RDS information.
-
-For more information see the core RDS standard :ref:`iec62106` and the
-RBDS standard :ref:`nrsc4`.
-
-.. note::
-
-   Note that the RBDS standard as is used in the USA is almost
-   identical to the RDS standard. Any RDS decoder/encoder can also handle
-   RBDS. Only some of the fields have slightly different meanings. See the
-   RBDS standard for more information.
-
-The RBDS standard also specifies support for MMBS (Modified Mobile
-Search). This is a proprietary format which seems to be discontinued.
-The RDS interface does not support this format. Should support for MMBS
-(or the so-called 'E blocks' in general) be needed, then please contact
-the linux-media mailing list:
-`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__.
-
-
-Querying Capabilities
-=====================
-
-Devices supporting the RDS capturing API set the
-``V4L2_CAP_RDS_CAPTURE`` flag in the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. Any tuner that
-supports RDS will set the ``V4L2_TUNER_CAP_RDS`` flag in the
-``capability`` field of struct :c:type:`v4l2_tuner`. If the
-driver only passes RDS blocks without interpreting the data the
-``V4L2_TUNER_CAP_RDS_BLOCK_IO`` flag has to be set, see
-:ref:`Reading RDS data <reading-rds-data>`. For future use the flag
-``V4L2_TUNER_CAP_RDS_CONTROLS`` has also been defined. However, a driver
-for a radio tuner with this capability does not yet exist, so if you are
-planning to write such a driver you should discuss this on the
-linux-media mailing list:
-`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__.
-
-Whether an RDS signal is present can be detected by looking at the
-``rxsubchans`` field of struct :c:type:`v4l2_tuner`: the
-``V4L2_TUNER_SUB_RDS`` will be set if RDS data was detected.
-
-Devices supporting the RDS output API set the ``V4L2_CAP_RDS_OUTPUT``
-flag in the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. Any modulator that
-supports RDS will set the ``V4L2_TUNER_CAP_RDS`` flag in the
-``capability`` field of struct
-:c:type:`v4l2_modulator`. In order to enable the RDS
-transmission one must set the ``V4L2_TUNER_SUB_RDS`` bit in the
-``txsubchans`` field of struct
-:c:type:`v4l2_modulator`. If the driver only passes RDS
-blocks without interpreting the data the ``V4L2_TUNER_CAP_RDS_BLOCK_IO``
-flag has to be set. If the tuner is capable of handling RDS entities
-like program identification codes and radio text, the flag
-``V4L2_TUNER_CAP_RDS_CONTROLS`` should be set, see
-:ref:`Writing RDS data <writing-rds-data>` and
-:ref:`FM Transmitter Control Reference <fm-tx-controls>`.
-
-
-.. _reading-rds-data:
-
-Reading RDS data
-================
-
-RDS data can be read from the radio device with the
-:ref:`read() <func-read>` function. The data is packed in groups of
-three bytes.
-
-
-.. _writing-rds-data:
-
-Writing RDS data
-================
-
-RDS data can be written to the radio device with the
-:ref:`write() <func-write>` function. The data is packed in groups of
-three bytes, as follows:
-
-
-RDS datastructures
-==================
-
-
-.. c:type:: v4l2_rds_data
-
-.. tabularcolumns:: |p{2.5cm}|p{2.5cm}|p{12.5cm}|
-
-.. flat-table:: struct v4l2_rds_data
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 5
-
-    * - __u8
-      - ``lsb``
-      - Least Significant Byte of RDS Block
-    * - __u8
-      - ``msb``
-      - Most Significant Byte of RDS Block
-    * - __u8
-      - ``block``
-      - Block description
-
-
-
-.. _v4l2-rds-block:
-
-.. tabularcolumns:: |p{2.9cm}|p{14.6cm}|
-
-.. flat-table:: Block description
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 5
-
-    * - Bits 0-2
-      - Block (aka offset) of the received data.
-    * - Bits 3-5
-      - Deprecated. Currently identical to bits 0-2. Do not use these
-	bits.
-    * - Bit 6
-      - Corrected bit. Indicates that an error was corrected for this data
-	block.
-    * - Bit 7
-      - Error bit. Indicates that an uncorrectable error occurred during
-	reception of this block.
-
-
-
-.. _v4l2-rds-block-codes:
-
-.. tabularcolumns:: |p{6.4cm}|p{2.0cm}|p{1.2cm}|p{7.9cm}|
-
-.. flat-table:: Block defines
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 1 5
-
-    * - V4L2_RDS_BLOCK_MSK
-      -
-      - 7
-      - Mask for bits 0-2 to get the block ID.
-    * - V4L2_RDS_BLOCK_A
-      -
-      - 0
-      - Block A.
-    * - V4L2_RDS_BLOCK_B
-      -
-      - 1
-      - Block B.
-    * - V4L2_RDS_BLOCK_C
-      -
-      - 2
-      - Block C.
-    * - V4L2_RDS_BLOCK_D
-      -
-      - 3
-      - Block D.
-    * - V4L2_RDS_BLOCK_C_ALT
-      -
-      - 4
-      - Block C'.
-    * - V4L2_RDS_BLOCK_INVALID
-      - read-only
-      - 7
-      - An invalid block.
-    * - V4L2_RDS_BLOCK_CORRECTED
-      - read-only
-      - 0x40
-      - A bit error was detected but corrected.
-    * - V4L2_RDS_BLOCK_ERROR
-      - read-only
-      - 0x80
-      - An uncorrectable error occurred.
diff --git a/Documentation/media/uapi/v4l/dev-sdr.rst b/Documentation/media/uapi/v4l/dev-sdr.rst
deleted file mode 100644
index 75595c58cb5b..000000000000
--- a/Documentation/media/uapi/v4l/dev-sdr.rst
+++ /dev/null
@@ -1,114 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _sdr:
-
-**************************************
-Software Defined Radio Interface (SDR)
-**************************************
-
-SDR is an abbreviation of Software Defined Radio, the radio device which
-uses application software for modulation or demodulation. This interface
-is intended for controlling and data streaming of such devices.
-
-SDR devices are accessed through character device special files named
-``/dev/swradio0`` to ``/dev/swradio255`` with major number 81 and
-dynamically allocated minor numbers 0 to 255.
-
-
-Querying Capabilities
-=====================
-
-Devices supporting the SDR receiver interface set the
-``V4L2_CAP_SDR_CAPTURE`` and ``V4L2_CAP_TUNER`` flag in the
-``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. That flag means the
-device has an Analog to Digital Converter (ADC), which is a mandatory
-element for the SDR receiver.
-
-Devices supporting the SDR transmitter interface set the
-``V4L2_CAP_SDR_OUTPUT`` and ``V4L2_CAP_MODULATOR`` flag in the
-``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. That flag means the
-device has an Digital to Analog Converter (DAC), which is a mandatory
-element for the SDR transmitter.
-
-At least one of the read/write, streaming or asynchronous I/O methods
-must be supported.
-
-
-Supplemental Functions
-======================
-
-SDR devices can support :ref:`controls <control>`, and must support
-the :ref:`tuner` ioctls. Tuner ioctls are used for setting the
-ADC/DAC sampling rate (sampling frequency) and the possible radio
-frequency (RF).
-
-The ``V4L2_TUNER_SDR`` tuner type is used for setting SDR device ADC/DAC
-frequency, and the ``V4L2_TUNER_RF`` tuner type is used for setting
-radio frequency. The tuner index of the RF tuner (if any) must always
-follow the SDR tuner index. Normally the SDR tuner is #0 and the RF
-tuner is #1.
-
-The :ref:`VIDIOC_S_HW_FREQ_SEEK` ioctl is
-not supported.
-
-
-Data Format Negotiation
-=======================
-
-The SDR device uses the :ref:`format` ioctls to select the
-capture and output format. Both the sampling resolution and the data
-streaming format are bound to that selectable format. In addition to the
-basic :ref:`format` ioctls, the
-:ref:`VIDIOC_ENUM_FMT` ioctl must be supported as
-well.
-
-To use the :ref:`format` ioctls applications set the ``type``
-field of a struct :c:type:`v4l2_format` to
-``V4L2_BUF_TYPE_SDR_CAPTURE`` or ``V4L2_BUF_TYPE_SDR_OUTPUT`` and use
-the struct :c:type:`v4l2_sdr_format` ``sdr`` member
-of the ``fmt`` union as needed per the desired operation. Currently
-there is two fields, ``pixelformat`` and ``buffersize``, of struct
-struct :c:type:`v4l2_sdr_format` which are used.
-Content of the ``pixelformat`` is V4L2 FourCC code of the data format.
-The ``buffersize`` field is maximum buffer size in bytes required for
-data transfer, set by the driver in order to inform application.
-
-
-.. c:type:: v4l2_sdr_format
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_sdr_format
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``pixelformat``
-      - The data format or type of compression, set by the application.
-	This is a little endian
-	:ref:`four character code <v4l2-fourcc>`. V4L2 defines SDR
-	formats in :ref:`sdr-formats`.
-    * - __u32
-      - ``buffersize``
-      - Maximum size in bytes required for data. Value is set by the
-	driver.
-    * - __u8
-      - ``reserved[24]``
-      - This array is reserved for future extensions. Drivers and
-	applications must set it to zero.
-
-
-An SDR device may support :ref:`read/write <rw>` and/or streaming
-(:ref:`memory mapping <mmap>` or :ref:`user pointer <userp>`) I/O.
diff --git a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst
deleted file mode 100644
index 7b2d38dd402a..000000000000
--- a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst
+++ /dev/null
@@ -1,669 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _sliced:
-
-*************************
-Sliced VBI Data Interface
-*************************
-
-VBI stands for Vertical Blanking Interval, a gap in the sequence of
-lines of an analog video signal. During VBI no picture information is
-transmitted, allowing some time while the electron beam of a cathode ray
-tube TV returns to the top of the screen.
-
-Sliced VBI devices use hardware to demodulate data transmitted in the
-VBI. V4L2 drivers shall *not* do this by software, see also the
-:ref:`raw VBI interface <raw-vbi>`. The data is passed as short
-packets of fixed size, covering one scan line each. The number of
-packets per video frame is variable.
-
-Sliced VBI capture and output devices are accessed through the same
-character special files as raw VBI devices. When a driver supports both
-interfaces, the default function of a ``/dev/vbi`` device is *raw* VBI
-capturing or output, and the sliced VBI function is only available after
-calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl as defined
-below. Likewise a ``/dev/video`` device may support the sliced VBI API,
-however the default function here is video capturing or output.
-Different file descriptors must be used to pass raw and sliced VBI data
-simultaneously, if this is supported by the driver.
-
-
-Querying Capabilities
-=====================
-
-Devices supporting the sliced VBI capturing or output API set the
-``V4L2_CAP_SLICED_VBI_CAPTURE`` or ``V4L2_CAP_SLICED_VBI_OUTPUT`` flag
-respectively, in the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl. At least one of the
-read/write, streaming or asynchronous :ref:`I/O methods <io>` must be
-supported. Sliced VBI devices may have a tuner or modulator.
-
-
-Supplemental Functions
-======================
-
-Sliced VBI devices shall support :ref:`video input or output <video>`
-and :ref:`tuner or modulator <tuner>` ioctls if they have these
-capabilities, and they may support :ref:`control` ioctls.
-The :ref:`video standard <standard>` ioctls provide information vital
-to program a sliced VBI device, therefore must be supported.
-
-
-.. _sliced-vbi-format-negotitation:
-
-Sliced VBI Format Negotiation
-=============================
-
-To find out which data services are supported by the hardware
-applications can call the
-:ref:`VIDIOC_G_SLICED_VBI_CAP <VIDIOC_G_SLICED_VBI_CAP>` ioctl.
-All drivers implementing the sliced VBI interface must support this
-ioctl. The results may differ from those of the
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl when the number of VBI
-lines the hardware can capture or output per frame, or the number of
-services it can identify on a given line are limited. For example on PAL
-line 16 the hardware may be able to look for a VPS or Teletext signal,
-but not both at the same time.
-
-To determine the currently selected services applications set the
-``type`` field of struct :c:type:`v4l2_format` to
-``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE`` or
-``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``, and the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl fills the ``fmt.sliced``
-member, a struct
-:c:type:`v4l2_sliced_vbi_format`.
-
-Applications can request different parameters by initializing or
-modifying the ``fmt.sliced`` member and calling the
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with a pointer to the
-struct :c:type:`v4l2_format` structure.
-
-The sliced VBI API is more complicated than the raw VBI API because the
-hardware must be told which VBI service to expect on each scan line. Not
-all services may be supported by the hardware on all lines (this is
-especially true for VBI output where Teletext is often unsupported and
-other services can only be inserted in one specific line). In many
-cases, however, it is sufficient to just set the ``service_set`` field
-to the required services and let the driver fill the ``service_lines``
-array according to hardware capabilities. Only if more precise control
-is needed should the programmer set the ``service_lines`` array
-explicitly.
-
-The :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl modifies the parameters
-according to hardware capabilities. When the driver allocates resources
-at this point, it may return an ``EBUSY`` error code if the required
-resources are temporarily unavailable. Other resource allocation points
-which may return ``EBUSY`` can be the
-:ref:`VIDIOC_STREAMON` ioctl and the first
-:ref:`read() <func-read>`, :ref:`write() <func-write>` and
-:ref:`select() <func-select>` call.
-
-
-.. c:type:: v4l2_sliced_vbi_format
-
-struct v4l2_sliced_vbi_format
------------------------------
-
-.. raw:: latex
-
-    \begingroup
-    \scriptsize
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{.85cm}|p{3.3cm}|p{4.4cm}|p{4.4cm}|p{4.4cm}|
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 3 2 2 2
-
-    * - __u32
-      - ``service_set``
-      - :cspan:`2`
-
-	If ``service_set`` is non-zero when passed with
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` or
-	:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>`, the ``service_lines``
-	array will be filled by the driver according to the services
-	specified in this field. For example, if ``service_set`` is
-	initialized with ``V4L2_SLICED_TELETEXT_B | V4L2_SLICED_WSS_625``,
-	a driver for the cx25840 video decoder sets lines 7-22 of both
-	fields [#f1]_ to ``V4L2_SLICED_TELETEXT_B`` and line 23 of the first
-	field to ``V4L2_SLICED_WSS_625``. If ``service_set`` is set to
-	zero, then the values of ``service_lines`` will be used instead.
-
-	On return the driver sets this field to the union of all elements
-	of the returned ``service_lines`` array. It may contain less
-	services than requested, perhaps just one, if the hardware cannot
-	handle more services simultaneously. It may be empty (zero) if
-	none of the requested services are supported by the hardware.
-    * - __u16
-      - ``service_lines``\ [2][24]
-      - :cspan:`2`
-
-	Applications initialize this array with sets of data services the
-	driver shall look for or insert on the respective scan line.
-	Subject to hardware capabilities drivers return the requested set,
-	a subset, which may be just a single service, or an empty set.
-	When the hardware cannot handle multiple services on the same line
-	the driver shall choose one. No assumptions can be made on which
-	service the driver chooses.
-
-	Data services are defined in :ref:`vbi-services2`. Array indices
-	map to ITU-R line numbers\ [#f2]_ as follows:
-    * -
-      -
-      - Element
-      - 525 line systems
-      - 625 line systems
-    * -
-      -
-      - ``service_lines``\ [0][1]
-      - 1
-      - 1
-    * -
-      -
-      - ``service_lines``\ [0][23]
-      - 23
-      - 23
-    * -
-      -
-      - ``service_lines``\ [1][1]
-      - 264
-      - 314
-    * -
-      -
-      - ``service_lines``\ [1][23]
-      - 286
-      - 336
-    * -
-      -
-      - :cspan:`2` Drivers must set ``service_lines`` [0][0] and
-	``service_lines``\ [1][0] to zero. The
-	``V4L2_VBI_ITU_525_F1_START``, ``V4L2_VBI_ITU_525_F2_START``,
-	``V4L2_VBI_ITU_625_F1_START`` and ``V4L2_VBI_ITU_625_F2_START``
-	defines give the start line numbers for each field for each 525 or
-	625 line format as a convenience. Don't forget that ITU line
-	numbering starts at 1, not 0.
-    * - __u32
-      - ``io_size``
-      - :cspan:`2` Maximum number of bytes passed by one
-	:ref:`read() <func-read>` or :ref:`write() <func-write>` call,
-	and the buffer size in bytes for the
-	:ref:`VIDIOC_QBUF` and
-	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. Drivers set this field
-	to the size of struct
-	:c:type:`v4l2_sliced_vbi_data` times the
-	number of non-zero elements in the returned ``service_lines``
-	array (that is the number of lines potentially carrying data).
-    * - __u32
-      - ``reserved``\ [2]
-      - :cspan:`2` This array is reserved for future extensions.
-
-	Applications and drivers must set it to zero.
-
-.. raw:: latex
-
-    \endgroup
-
-.. _vbi-services2:
-
-Sliced VBI services
--------------------
-
-.. raw:: latex
-
-    \scriptsize
-
-.. tabularcolumns:: |p{4.1cm}|p{1.1cm}|p{2.4cm}|p{2.0cm}|p{7.3cm}|
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       2 1 1 2 2
-
-    * - Symbol
-      - Value
-      - Reference
-      - Lines, usually
-      - Payload
-    * - ``V4L2_SLICED_TELETEXT_B`` (Teletext System B)
-      - 0x0001
-      - :ref:`ets300706`,
-
-	:ref:`itu653`
-      - PAL/SECAM line 7-22, 320-335 (second field 7-22)
-      - Last 42 of the 45 byte Teletext packet, that is without clock
-	run-in and framing code, lsb first transmitted.
-    * - ``V4L2_SLICED_VPS``
-      - 0x0400
-      - :ref:`ets300231`
-      - PAL line 16
-      - Byte number 3 to 15 according to Figure 9 of ETS 300 231, lsb
-	first transmitted.
-    * - ``V4L2_SLICED_CAPTION_525``
-      - 0x1000
-      - :ref:`cea608`
-      - NTSC line 21, 284 (second field 21)
-      - Two bytes in transmission order, including parity bit, lsb first
-	transmitted.
-    * - ``V4L2_SLICED_WSS_625``
-      - 0x4000
-      - :ref:`itu1119`,
-
-	:ref:`en300294`
-      - PAL/SECAM line 23
-      -
-
-	::
-
-	    Byte         0                 1
-		  msb         lsb  msb           lsb
-	     Bit  7 6 5 4 3 2 1 0  x x 13 12 11 10 9
-    * - ``V4L2_SLICED_VBI_525``
-      - 0x1000
-      - :cspan:`2` Set of services applicable to 525 line systems.
-    * - ``V4L2_SLICED_VBI_625``
-      - 0x4401
-      - :cspan:`2` Set of services applicable to 625 line systems.
-
-.. raw:: latex
-
-    \normalsize
-
-
-Drivers may return an ``EINVAL`` error code when applications attempt to
-read or write data without prior format negotiation, after switching the
-video standard (which may invalidate the negotiated VBI parameters) and
-after switching the video input (which may change the video standard as
-a side effect). The :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl may
-return an ``EBUSY`` error code when applications attempt to change the
-format while i/o is in progress (between a
-:ref:`VIDIOC_STREAMON` and
-:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` call, and after the first
-:ref:`read() <func-read>` or :ref:`write() <func-write>` call).
-
-
-Reading and writing sliced VBI data
-===================================
-
-A single :ref:`read() <func-read>` or :ref:`write() <func-write>`
-call must pass all data belonging to one video frame. That is an array
-of struct :c:type:`v4l2_sliced_vbi_data` structures with one or
-more elements and a total size not exceeding ``io_size`` bytes. Likewise
-in streaming I/O mode one buffer of ``io_size`` bytes must contain data
-of one video frame. The ``id`` of unused
-struct :c:type:`v4l2_sliced_vbi_data` elements must be zero.
-
-
-.. c:type:: v4l2_sliced_vbi_data
-
-struct v4l2_sliced_vbi_data
----------------------------
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - __u32
-      - ``id``
-      - A flag from :ref:`vbi-services` identifying the type of data in
-	this packet. Only a single bit must be set. When the ``id`` of a
-	captured packet is zero, the packet is empty and the contents of
-	other fields are undefined. Applications shall ignore empty
-	packets. When the ``id`` of a packet for output is zero the
-	contents of the ``data`` field are undefined and the driver must
-	no longer insert data on the requested ``field`` and ``line``.
-    * - __u32
-      - ``field``
-      - The video field number this data has been captured from, or shall
-	be inserted at. ``0`` for the first field, ``1`` for the second
-	field.
-    * - __u32
-      - ``line``
-      - The field (as opposed to frame) line number this data has been
-	captured from, or shall be inserted at. See :ref:`vbi-525` and
-	:ref:`vbi-625` for valid values. Sliced VBI capture devices can
-	set the line number of all packets to ``0`` if the hardware cannot
-	reliably identify scan lines. The field number must always be
-	valid.
-    * - __u32
-      - ``reserved``
-      - This field is reserved for future extensions. Applications and
-	drivers must set it to zero.
-    * - __u8
-      - ``data``\ [48]
-      - The packet payload. See :ref:`vbi-services` for the contents and
-	number of bytes passed for each data type. The contents of padding
-	bytes at the end of this array are undefined, drivers and
-	applications shall ignore them.
-
-
-Packets are always passed in ascending line number order, without
-duplicate line numbers. The :ref:`write() <func-write>` function and
-the :ref:`VIDIOC_QBUF` ioctl must return an ``EINVAL``
-error code when applications violate this rule. They must also return an
-EINVAL error code when applications pass an incorrect field or line
-number, or a combination of ``field``, ``line`` and ``id`` which has not
-been negotiated with the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` or
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. When the line numbers are
-unknown the driver must pass the packets in transmitted order. The
-driver can insert empty packets with ``id`` set to zero anywhere in the
-packet array.
-
-To assure synchronization and to distinguish from frame dropping, when a
-captured frame does not carry any of the requested data services drivers
-must pass one or more empty packets. When an application fails to pass
-VBI data in time for output, the driver must output the last VPS and WSS
-packet again, and disable the output of Closed Caption and Teletext
-data, or output data which is ignored by Closed Caption and Teletext
-decoders.
-
-A sliced VBI device may support :ref:`read/write <rw>` and/or
-streaming (:ref:`memory mapping <mmap>` and/or
-:ref:`user pointer <userp>`) I/O. The latter bears the possibility of
-synchronizing video and VBI data by using buffer timestamps.
-
-
-Sliced VBI Data in MPEG Streams
-===============================
-
-If a device can produce an MPEG output stream, it may be capable of
-providing
-:ref:`negotiated sliced VBI services <sliced-vbi-format-negotitation>`
-as data embedded in the MPEG stream. Users or applications control this
-sliced VBI data insertion with the
-:ref:`V4L2_CID_MPEG_STREAM_VBI_FMT <v4l2-mpeg-stream-vbi-fmt>`
-control.
-
-If the driver does not provide the
-:ref:`V4L2_CID_MPEG_STREAM_VBI_FMT <v4l2-mpeg-stream-vbi-fmt>`
-control, or only allows that control to be set to
-:ref:`V4L2_MPEG_STREAM_VBI_FMT_NONE <v4l2-mpeg-stream-vbi-fmt>`,
-then the device cannot embed sliced VBI data in the MPEG stream.
-
-The
-:ref:`V4L2_CID_MPEG_STREAM_VBI_FMT <v4l2-mpeg-stream-vbi-fmt>`
-control does not implicitly set the device driver to capture nor cease
-capturing sliced VBI data. The control only indicates to embed sliced
-VBI data in the MPEG stream, if an application has negotiated sliced VBI
-service be captured.
-
-It may also be the case that a device can embed sliced VBI data in only
-certain types of MPEG streams: for example in an MPEG-2 PS but not an
-MPEG-2 TS. In this situation, if sliced VBI data insertion is requested,
-the sliced VBI data will be embedded in MPEG stream types when
-supported, and silently omitted from MPEG stream types where sliced VBI
-data insertion is not supported by the device.
-
-The following subsections specify the format of the embedded sliced VBI
-data.
-
-
-MPEG Stream Embedded, Sliced VBI Data Format: NONE
---------------------------------------------------
-
-The
-:ref:`V4L2_MPEG_STREAM_VBI_FMT_NONE <v4l2-mpeg-stream-vbi-fmt>`
-embedded sliced VBI format shall be interpreted by drivers as a control
-to cease embedding sliced VBI data in MPEG streams. Neither the device
-nor driver shall insert "empty" embedded sliced VBI data packets in the
-MPEG stream when this format is set. No MPEG stream data structures are
-specified for this format.
-
-
-MPEG Stream Embedded, Sliced VBI Data Format: IVTV
---------------------------------------------------
-
-The
-:ref:`V4L2_MPEG_STREAM_VBI_FMT_IVTV <v4l2-mpeg-stream-vbi-fmt>`
-embedded sliced VBI format, when supported, indicates to the driver to
-embed up to 36 lines of sliced VBI data per frame in an MPEG-2 *Private
-Stream 1 PES* packet encapsulated in an MPEG-2 *Program Pack* in the
-MPEG stream.
-
-*Historical context*: This format specification originates from a
-custom, embedded, sliced VBI data format used by the ``ivtv`` driver.
-This format has already been informally specified in the kernel sources
-in the file ``Documentation/media/v4l-drivers/cx2341x.rst`` . The
-maximum size of the payload and other aspects of this format are driven
-by the CX23415 MPEG decoder's capabilities and limitations with respect
-to extracting, decoding, and displaying sliced VBI data embedded within
-an MPEG stream.
-
-This format's use is *not* exclusive to the ``ivtv`` driver *nor*
-exclusive to CX2341x devices, as the sliced VBI data packet insertion
-into the MPEG stream is implemented in driver software. At least the
-``cx18`` driver provides sliced VBI data insertion into an MPEG-2 PS in
-this format as well.
-
-The following definitions specify the payload of the MPEG-2 *Private
-Stream 1 PES* packets that contain sliced VBI data when
-:ref:`V4L2_MPEG_STREAM_VBI_FMT_IVTV <v4l2-mpeg-stream-vbi-fmt>`
-is set. (The MPEG-2 *Private Stream 1 PES* packet header and
-encapsulating MPEG-2 *Program Pack* header are not detailed here. Please
-refer to the MPEG-2 specifications for details on those packet headers.)
-
-The payload of the MPEG-2 *Private Stream 1 PES* packets that contain
-sliced VBI data is specified by struct
-:c:type:`v4l2_mpeg_vbi_fmt_ivtv`. The
-payload is variable length, depending on the actual number of lines of
-sliced VBI data present in a video frame. The payload may be padded at
-the end with unspecified fill bytes to align the end of the payload to a
-4-byte boundary. The payload shall never exceed 1552 bytes (2 fields
-with 18 lines/field with 43 bytes of data/line and a 4 byte magic
-number).
-
-
-.. c:type:: v4l2_mpeg_vbi_fmt_ivtv
-
-struct v4l2_mpeg_vbi_fmt_ivtv
------------------------------
-
-.. tabularcolumns:: |p{1.0cm}|p{3.8cm}|p{1.0cm}|p{11.2cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``magic``\ [4]
-      - A "magic" constant from :ref:`v4l2-mpeg-vbi-fmt-ivtv-magic` that
-	indicates this is a valid sliced VBI data payload and also
-	indicates which member of the anonymous union, ``itv0`` or
-	``ITV0``, to use for the payload data.
-    * - union {
-      - (anonymous)
-    * - struct :c:type:`v4l2_mpeg_vbi_itv0`
-      - ``itv0``
-      - The primary form of the sliced VBI data payload that contains
-	anywhere from 1 to 35 lines of sliced VBI data. Line masks are
-	provided in this form of the payload indicating which VBI lines
-	are provided.
-    * - struct :ref:`v4l2_mpeg_vbi_ITV0 <v4l2-mpeg-vbi-itv0-1>`
-      - ``ITV0``
-      - An alternate form of the sliced VBI data payload used when 36
-	lines of sliced VBI data are present. No line masks are provided
-	in this form of the payload; all valid line mask bits are
-	implcitly set.
-    * - }
-      -
-
-.. _v4l2-mpeg-vbi-fmt-ivtv-magic:
-
-Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field
--------------------------------------------------------------
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - Defined Symbol
-      - Value
-      - Description
-    * - ``V4L2_MPEG_VBI_IVTV_MAGIC0``
-      - "itv0"
-      - Indicates the ``itv0`` member of the union in struct
-	:c:type:`v4l2_mpeg_vbi_fmt_ivtv` is
-	valid.
-    * - ``V4L2_MPEG_VBI_IVTV_MAGIC1``
-      - "ITV0"
-      - Indicates the ``ITV0`` member of the union in struct
-	:c:type:`v4l2_mpeg_vbi_fmt_ivtv` is
-	valid and that 36 lines of sliced VBI data are present.
-
-
-
-.. c:type:: v4l2_mpeg_vbi_itv0
-
-.. c:type:: v4l2_mpeg_vbi_ITV0
-
-structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0
--------------------------------------------------
-
-.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __le32
-      - ``linemask``\ [2]
-      - Bitmasks indicating the VBI service lines present. These
-	``linemask`` values are stored in little endian byte order in the
-	MPEG stream. Some reference ``linemask`` bit positions with their
-	corresponding VBI line number and video field are given below.
-	b\ :sub:`0` indicates the least significant bit of a ``linemask``
-	value:
-
-
-
-	::
-
-	    linemask[0] b0:     line  6  first field
-	    linemask[0] b17:    line 23  first field
-	    linemask[0] b18:    line  6  second field
-	    linemask[0] b31:    line 19  second field
-	    linemask[1] b0:     line 20  second field
-	    linemask[1] b3:     line 23  second field
-	    linemask[1] b4-b31: unused and set to 0
-    * - struct
-	:c:type:`v4l2_mpeg_vbi_itv0_line`
-      - ``line``\ [35]
-      - This is a variable length array that holds from 1 to 35 lines of
-	sliced VBI data. The sliced VBI data lines present correspond to
-	the bits set in the ``linemask`` array, starting from b\ :sub:`0`
-	of ``linemask``\ [0] up through b\ :sub:`31` of ``linemask``\ [0],
-	and from b\ :sub:`0` of ``linemask``\ [1] up through b\ :sub:`3` of
-	``linemask``\ [1]. ``line``\ [0] corresponds to the first bit
-	found set in the ``linemask`` array, ``line``\ [1] corresponds to
-	the second bit found set in the ``linemask`` array, etc. If no
-	``linemask`` array bits are set, then ``line``\ [0] may contain
-	one line of unspecified data that should be ignored by
-	applications.
-
-
-
-.. _v4l2-mpeg-vbi-itv0-1:
-
-struct v4l2_mpeg_vbi_ITV0
--------------------------
-
-.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - struct
-	:c:type:`v4l2_mpeg_vbi_itv0_line`
-      - ``line``\ [36]
-      - A fixed length array of 36 lines of sliced VBI data. ``line``\ [0]
-	through ``line``\ [17] correspond to lines 6 through 23 of the
-	first field. ``line``\ [18] through ``line``\ [35] corresponds to
-	lines 6 through 23 of the second field.
-
-
-
-.. c:type:: v4l2_mpeg_vbi_itv0_line
-
-struct v4l2_mpeg_vbi_itv0_line
-------------------------------
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``id``
-      - A line identifier value from
-	:ref:`ITV0-Line-Identifier-Constants` that indicates the type of
-	sliced VBI data stored on this line.
-    * - __u8
-      - ``data``\ [42]
-      - The sliced VBI data for the line.
-
-
-
-.. _ITV0-Line-Identifier-Constants:
-
-Line Identifiers for struct v4l2_mpeg_vbi_itv0_line id field
-------------------------------------------------------------
-
-.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}|
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - Defined Symbol
-      - Value
-      - Description
-    * - ``V4L2_MPEG_VBI_IVTV_TELETEXT_B``
-      - 1
-      - Refer to :ref:`Sliced VBI services <vbi-services2>` for a
-	description of the line payload.
-    * - ``V4L2_MPEG_VBI_IVTV_CAPTION_525``
-      - 4
-      - Refer to :ref:`Sliced VBI services <vbi-services2>` for a
-	description of the line payload.
-    * - ``V4L2_MPEG_VBI_IVTV_WSS_625``
-      - 5
-      - Refer to :ref:`Sliced VBI services <vbi-services2>` for a
-	description of the line payload.
-    * - ``V4L2_MPEG_VBI_IVTV_VPS``
-      - 7
-      - Refer to :ref:`Sliced VBI services <vbi-services2>` for a
-	description of the line payload.
-
-
-
-.. [#f1]
-   According to :ref:`ETS 300 706 <ets300706>` lines 6-22 of the first
-   field and lines 5-22 of the second field may carry Teletext data.
-
-.. [#f2]
-   See also :ref:`vbi-525` and :ref:`vbi-625`.
diff --git a/Documentation/media/uapi/v4l/dev-stateless-decoder.rst b/Documentation/media/uapi/v4l/dev-stateless-decoder.rst
deleted file mode 100644
index 4a26646eeec5..000000000000
--- a/Documentation/media/uapi/v4l/dev-stateless-decoder.rst
+++ /dev/null
@@ -1,424 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. _stateless_decoder:
-
-**************************************************
-Memory-to-memory Stateless Video Decoder Interface
-**************************************************
-
-A stateless decoder is a decoder that works without retaining any kind of state
-between processed frames. This means that each frame is decoded independently
-of any previous and future frames, and that the client is responsible for
-maintaining the decoding state and providing it to the decoder with each
-decoding request. This is in contrast to the stateful video decoder interface,
-where the hardware and driver maintain the decoding state and all the client
-has to do is to provide the raw encoded stream and dequeue decoded frames in
-display order.
-
-This section describes how user-space ("the client") is expected to communicate
-with stateless decoders in order to successfully decode an encoded stream.
-Compared to stateful codecs, the decoder/client sequence is simpler, but the
-cost of this simplicity is extra complexity in the client which is responsible
-for maintaining a consistent decoding state.
-
-Stateless decoders make use of the :ref:`media-request-api`. A stateless
-decoder must expose the ``V4L2_BUF_CAP_SUPPORTS_REQUESTS`` capability on its
-``OUTPUT`` queue when :c:func:`VIDIOC_REQBUFS` or :c:func:`VIDIOC_CREATE_BUFS`
-are invoked.
-
-Depending on the encoded formats supported by the decoder, a single decoded
-frame may be the result of several decode requests (for instance, H.264 streams
-with multiple slices per frame). Decoders that support such formats must also
-expose the ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` capability on their
-``OUTPUT`` queue.
-
-Querying capabilities
-=====================
-
-1. To enumerate the set of coded formats supported by the decoder, the client
-   calls :c:func:`VIDIOC_ENUM_FMT` on the ``OUTPUT`` queue.
-
-   * The driver must always return the full set of supported ``OUTPUT`` formats,
-     irrespective of the format currently set on the ``CAPTURE`` queue.
-
-   * Simultaneously, the driver must restrain the set of values returned by
-     codec-specific capability controls (such as H.264 profiles) to the set
-     actually supported by the hardware.
-
-2. To enumerate the set of supported raw formats, the client calls
-   :c:func:`VIDIOC_ENUM_FMT` on the ``CAPTURE`` queue.
-
-   * The driver must return only the formats supported for the format currently
-     active on the ``OUTPUT`` queue.
-
-   * Depending on the currently set ``OUTPUT`` format, the set of supported raw
-     formats may depend on the value of some codec-dependent controls.
-     The client is responsible for making sure that these controls are set
-     before querying the ``CAPTURE`` queue. Failure to do so will result in the
-     default values for these controls being used, and a returned set of formats
-     that may not be usable for the media the client is trying to decode.
-
-3. The client may use :c:func:`VIDIOC_ENUM_FRAMESIZES` to detect supported
-   resolutions for a given format, passing desired pixel format in
-   :c:type:`v4l2_frmsizeenum`'s ``pixel_format``.
-
-4. Supported profiles and levels for the current ``OUTPUT`` format, if
-   applicable, may be queried using their respective controls via
-   :c:func:`VIDIOC_QUERYCTRL`.
-
-Initialization
-==============
-
-1. Set the coded format on the ``OUTPUT`` queue via :c:func:`VIDIOC_S_FMT`.
-
-   * **Required fields:**
-
-     ``type``
-         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
-
-     ``pixelformat``
-         a coded pixel format.
-
-     ``width``, ``height``
-         coded width and height parsed from the stream.
-
-     other fields
-         follow standard semantics.
-
-   .. note::
-
-      Changing the ``OUTPUT`` format may change the currently set ``CAPTURE``
-      format. The driver will derive a new ``CAPTURE`` format from the
-      ``OUTPUT`` format being set, including resolution, colorimetry
-      parameters, etc. If the client needs a specific ``CAPTURE`` format,
-      it must adjust it afterwards.
-
-2. Call :c:func:`VIDIOC_S_EXT_CTRLS` to set all the controls (parsed headers,
-   etc.) required by the ``OUTPUT`` format to enumerate the ``CAPTURE`` formats.
-
-3. Call :c:func:`VIDIOC_G_FMT` for ``CAPTURE`` queue to get the format for the
-   destination buffers parsed/decoded from the bytestream.
-
-   * **Required fields:**
-
-     ``type``
-         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-   * **Returned fields:**
-
-     ``width``, ``height``
-         frame buffer resolution for the decoded frames.
-
-     ``pixelformat``
-         pixel format for decoded frames.
-
-     ``num_planes`` (for _MPLANE ``type`` only)
-         number of planes for pixelformat.
-
-     ``sizeimage``, ``bytesperline``
-         as per standard semantics; matching frame buffer format.
-
-   .. note::
-
-      The value of ``pixelformat`` may be any pixel format supported for the
-      ``OUTPUT`` format, based on the hardware capabilities. It is suggested
-      that the driver chooses the preferred/optimal format for the current
-      configuration. For example, a YUV format may be preferred over an RGB
-      format, if an additional conversion step would be required for RGB.
-
-4. *[optional]* Enumerate ``CAPTURE`` formats via :c:func:`VIDIOC_ENUM_FMT` on
-   the ``CAPTURE`` queue. The client may use this ioctl to discover which
-   alternative raw formats are supported for the current ``OUTPUT`` format and
-   select one of them via :c:func:`VIDIOC_S_FMT`.
-
-   .. note::
-
-      The driver will return only formats supported for the currently selected
-      ``OUTPUT`` format and currently set controls, even if more formats may be
-      supported by the decoder in general.
-
-      For example, a decoder may support YUV and RGB formats for
-      resolutions 1920x1088 and lower, but only YUV for higher resolutions (due
-      to hardware limitations). After setting a resolution of 1920x1088 or lower
-      as the ``OUTPUT`` format, :c:func:`VIDIOC_ENUM_FMT` may return a set of
-      YUV and RGB pixel formats, but after setting a resolution higher than
-      1920x1088, the driver will not return RGB pixel formats, since they are
-      unsupported for this resolution.
-
-5. *[optional]* Choose a different ``CAPTURE`` format than suggested via
-   :c:func:`VIDIOC_S_FMT` on ``CAPTURE`` queue. It is possible for the client to
-   choose a different format than selected/suggested by the driver in
-   :c:func:`VIDIOC_G_FMT`.
-
-    * **Required fields:**
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-      ``pixelformat``
-          a raw pixel format.
-
-      ``width``, ``height``
-         frame buffer resolution of the decoded stream; typically unchanged from
-         what was returned with :c:func:`VIDIOC_G_FMT`, but it may be different
-         if the hardware supports composition and/or scaling.
-
-   After performing this step, the client must perform step 3 again in order
-   to obtain up-to-date information about the buffers size and layout.
-
-6. Allocate source (bytestream) buffers via :c:func:`VIDIOC_REQBUFS` on
-   ``OUTPUT`` queue.
-
-    * **Required fields:**
-
-      ``count``
-          requested number of buffers to allocate; greater than zero.
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
-
-      ``memory``
-          follows standard semantics.
-
-    * **Return fields:**
-
-      ``count``
-          actual number of buffers allocated.
-
-    * If required, the driver will adjust ``count`` to be equal or bigger to the
-      minimum of required number of ``OUTPUT`` buffers for the given format and
-      requested count. The client must check this value after the ioctl returns
-      to get the actual number of buffers allocated.
-
-7. Allocate destination (raw format) buffers via :c:func:`VIDIOC_REQBUFS` on the
-   ``CAPTURE`` queue.
-
-    * **Required fields:**
-
-      ``count``
-          requested number of buffers to allocate; greater than zero. The client
-          is responsible for deducing the minimum number of buffers required
-          for the stream to be properly decoded (taking e.g. reference frames
-          into account) and pass an equal or bigger number.
-
-      ``type``
-          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
-
-      ``memory``
-          follows standard semantics. ``V4L2_MEMORY_USERPTR`` is not supported
-          for ``CAPTURE`` buffers.
-
-    * **Return fields:**
-
-      ``count``
-          adjusted to allocated number of buffers, in case the codec requires
-          more buffers than requested.
-
-    * The driver must adjust count to the minimum of required number of
-      ``CAPTURE`` buffers for the current format, stream configuration and
-      requested count. The client must check this value after the ioctl
-      returns to get the number of buffers allocated.
-
-8. Allocate requests (likely one per ``OUTPUT`` buffer) via
-    :c:func:`MEDIA_IOC_REQUEST_ALLOC` on the media device.
-
-9. Start streaming on both ``OUTPUT`` and ``CAPTURE`` queues via
-    :c:func:`VIDIOC_STREAMON`.
-
-Decoding
-========
-
-For each frame, the client is responsible for submitting at least one request to
-which the following is attached:
-
-* The amount of encoded data expected by the codec for its current
-  configuration, as a buffer submitted to the ``OUTPUT`` queue. Typically, this
-  corresponds to one frame worth of encoded data, but some formats may allow (or
-  require) different amounts per unit.
-* All the metadata needed to decode the submitted encoded data, in the form of
-  controls relevant to the format being decoded.
-
-The amount of data and contents of the source ``OUTPUT`` buffer, as well as the
-controls that must be set on the request, depend on the active coded pixel
-format and might be affected by codec-specific extended controls, as stated in
-documentation of each format.
-
-If there is a possibility that the decoded frame will require one or more
-decode requests after the current one in order to be produced, then the client
-must set the ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag on the ``OUTPUT``
-buffer. This will result in the (potentially partially) decoded ``CAPTURE``
-buffer not being made available for dequeueing, and reused for the next decode
-request if the timestamp of the next ``OUTPUT`` buffer has not changed.
-
-A typical frame would thus be decoded using the following sequence:
-
-1. Queue an ``OUTPUT`` buffer containing one unit of encoded bytestream data for
-   the decoding request, using :c:func:`VIDIOC_QBUF`.
-
-    * **Required fields:**
-
-      ``index``
-          index of the buffer being queued.
-
-      ``type``
-          type of the buffer.
-
-      ``bytesused``
-          number of bytes taken by the encoded data frame in the buffer.
-
-      ``flags``
-          the ``V4L2_BUF_FLAG_REQUEST_FD`` flag must be set. Additionally, if
-          we are not sure that the current decode request is the last one needed
-          to produce a fully decoded frame, then
-          ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` must also be set.
-
-      ``request_fd``
-          must be set to the file descriptor of the decoding request.
-
-      ``timestamp``
-          must be set to a unique value per frame. This value will be propagated
-          into the decoded frame's buffer and can also be used to use this frame
-          as the reference of another. If using multiple decode requests per
-          frame, then the timestamps of all the ``OUTPUT`` buffers for a given
-          frame must be identical. If the timestamp changes, then the currently
-          held ``CAPTURE`` buffer will be made available for dequeuing and the
-          current request will work on a new ``CAPTURE`` buffer.
-
-2. Set the codec-specific controls for the decoding request, using
-   :c:func:`VIDIOC_S_EXT_CTRLS`.
-
-    * **Required fields:**
-
-      ``which``
-          must be ``V4L2_CTRL_WHICH_REQUEST_VAL``.
-
-      ``request_fd``
-          must be set to the file descriptor of the decoding request.
-
-      other fields
-          other fields are set as usual when setting controls. The ``controls``
-          array must contain all the codec-specific controls required to decode
-          a frame.
-
-   .. note::
-
-      It is possible to specify the controls in different invocations of
-      :c:func:`VIDIOC_S_EXT_CTRLS`, or to overwrite a previously set control, as
-      long as ``request_fd`` and ``which`` are properly set. The controls state
-      at the moment of request submission is the one that will be considered.
-
-   .. note::
-
-      The order in which steps 1 and 2 take place is interchangeable.
-
-3. Submit the request by invoking :c:func:`MEDIA_REQUEST_IOC_QUEUE` on the
-   request FD.
-
-    If the request is submitted without an ``OUTPUT`` buffer, or if some of the
-    required controls are missing from the request, then
-    :c:func:`MEDIA_REQUEST_IOC_QUEUE` will return ``-ENOENT``. If more than one
-    ``OUTPUT`` buffer is queued, then it will return ``-EINVAL``.
-    :c:func:`MEDIA_REQUEST_IOC_QUEUE` returning non-zero means that no
-    ``CAPTURE`` buffer will be produced for this request.
-
-``CAPTURE`` buffers must not be part of the request, and are queued
-independently. They are returned in decode order (i.e. the same order as coded
-frames were submitted to the ``OUTPUT`` queue).
-
-Runtime decoding errors are signaled by the dequeued ``CAPTURE`` buffers
-carrying the ``V4L2_BUF_FLAG_ERROR`` flag. If a decoded reference frame has an
-error, then all following decoded frames that refer to it also have the
-``V4L2_BUF_FLAG_ERROR`` flag set, although the decoder will still try to
-produce (likely corrupted) frames.
-
-Buffer management while decoding
-================================
-Contrary to stateful decoders, a stateless decoder does not perform any kind of
-buffer management: it only guarantees that dequeued ``CAPTURE`` buffers can be
-used by the client for as long as they are not queued again. "Used" here
-encompasses using the buffer for compositing or display.
-
-A dequeued capture buffer can also be used as the reference frame of another
-buffer.
-
-A frame is specified as reference by converting its timestamp into nanoseconds,
-and storing it into the relevant member of a codec-dependent control structure.
-The :c:func:`v4l2_timeval_to_ns` function must be used to perform that
-conversion. The timestamp of a frame can be used to reference it as soon as all
-its units of encoded data are successfully submitted to the ``OUTPUT`` queue.
-
-A decoded buffer containing a reference frame must not be reused as a decoding
-target until all the frames referencing it have been decoded. The safest way to
-achieve this is to refrain from queueing a reference buffer until all the
-decoded frames referencing it have been dequeued. However, if the driver can
-guarantee that buffers queued to the ``CAPTURE`` queue are processed in queued
-order, then user-space can take advantage of this guarantee and queue a
-reference buffer when the following conditions are met:
-
-1. All the requests for frames affected by the reference frame have been
-   queued, and
-
-2. A sufficient number of ``CAPTURE`` buffers to cover all the decoded
-   referencing frames have been queued.
-
-When queuing a decoding request, the driver will increase the reference count of
-all the resources associated with reference frames. This means that the client
-can e.g. close the DMABUF file descriptors of reference frame buffers if it
-won't need them afterwards.
-
-Seeking
-=======
-In order to seek, the client just needs to submit requests using input buffers
-corresponding to the new stream position. It must however be aware that
-resolution may have changed and follow the dynamic resolution change sequence in
-that case. Also depending on the codec used, picture parameters (e.g. SPS/PPS
-for H.264) may have changed and the client is responsible for making sure that a
-valid state is sent to the decoder.
-
-The client is then free to ignore any returned ``CAPTURE`` buffer that comes
-from the pre-seek position.
-
-Pausing
-=======
-
-In order to pause, the client can just cease queuing buffers onto the ``OUTPUT``
-queue. Without source bytestream data, there is no data to process and the codec
-will remain idle.
-
-Dynamic resolution change
-=========================
-
-If the client detects a resolution change in the stream, it will need to perform
-the initialization sequence again with the new resolution:
-
-1. If the last submitted request resulted in a ``CAPTURE`` buffer being
-   held by the use of the ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag, then the
-   last frame is not available on the ``CAPTURE`` queue. In this case, a
-   ``V4L2_DEC_CMD_FLUSH`` command shall be sent. This will make the driver
-   dequeue the held ``CAPTURE`` buffer.
-
-2. Wait until all submitted requests have completed and dequeue the
-   corresponding output buffers.
-
-3. Call :c:func:`VIDIOC_STREAMOFF` on both the ``OUTPUT`` and ``CAPTURE``
-   queues.
-
-4. Free all ``CAPTURE`` buffers by calling :c:func:`VIDIOC_REQBUFS` on the
-   ``CAPTURE`` queue with a buffer count of zero.
-
-5. Perform the initialization sequence again (minus the allocation of
-   ``OUTPUT`` buffers), with the new resolution set on the ``OUTPUT`` queue.
-   Note that due to resolution constraints, a different format may need to be
-   picked on the ``CAPTURE`` queue.
-
-Drain
-=====
-
-If the last submitted request resulted in a ``CAPTURE`` buffer being
-held by the use of the ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag, then the
-last frame is not available on the ``CAPTURE`` queue. In this case, a
-``V4L2_DEC_CMD_FLUSH`` command shall be sent. This will make the driver
-dequeue the held ``CAPTURE`` buffer.
-
-After that, in order to drain the stream on a stateless decoder, the client
-just needs to wait until all the submitted requests are completed.
diff --git a/Documentation/media/uapi/v4l/dev-subdev.rst b/Documentation/media/uapi/v4l/dev-subdev.rst
deleted file mode 100644
index 029bb2d9928a..000000000000
--- a/Documentation/media/uapi/v4l/dev-subdev.rst
+++ /dev/null
@@ -1,503 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _subdev:
-
-********************
-Sub-device Interface
-********************
-
-The complex nature of V4L2 devices, where hardware is often made of
-several integrated circuits that need to interact with each other in a
-controlled way, leads to complex V4L2 drivers. The drivers usually
-reflect the hardware model in software, and model the different hardware
-components as software blocks called sub-devices.
-
-V4L2 sub-devices are usually kernel-only objects. If the V4L2 driver
-implements the media device API, they will automatically inherit from
-media entities. Applications will be able to enumerate the sub-devices
-and discover the hardware topology using the media entities, pads and
-links enumeration API.
-
-In addition to make sub-devices discoverable, drivers can also choose to
-make them directly configurable by applications. When both the
-sub-device driver and the V4L2 device driver support this, sub-devices
-will feature a character device node on which ioctls can be called to
-
--  query, read and write sub-devices controls
-
--  subscribe and unsubscribe to events and retrieve them
-
--  negotiate image formats on individual pads
-
-Sub-device character device nodes, conventionally named
-``/dev/v4l-subdev*``, use major number 81.
-
-
-Controls
-========
-
-Most V4L2 controls are implemented by sub-device hardware. Drivers
-usually merge all controls and expose them through video device nodes.
-Applications can control all sub-devices through a single interface.
-
-Complex devices sometimes implement the same control in different pieces
-of hardware. This situation is common in embedded platforms, where both
-sensors and image processing hardware implement identical functions,
-such as contrast adjustment, white balance or faulty pixels correction.
-As the V4L2 controls API doesn't support several identical controls in a
-single device, all but one of the identical controls are hidden.
-
-Applications can access those hidden controls through the sub-device
-node with the V4L2 control API described in :ref:`control`. The ioctls
-behave identically as when issued on V4L2 device nodes, with the
-exception that they deal only with controls implemented in the
-sub-device.
-
-Depending on the driver, those controls might also be exposed through
-one (or several) V4L2 device nodes.
-
-
-Events
-======
-
-V4L2 sub-devices can notify applications of events as described in
-:ref:`event`. The API behaves identically as when used on V4L2 device
-nodes, with the exception that it only deals with events generated by
-the sub-device. Depending on the driver, those events might also be
-reported on one (or several) V4L2 device nodes.
-
-
-.. _pad-level-formats:
-
-Pad-level Formats
-=================
-
-.. warning::
-
-    Pad-level formats are only applicable to very complex devices that
-    need to expose low-level format configuration to user space. Generic
-    V4L2 applications do *not* need to use the API described in this
-    section.
-
-.. note::
-
-    For the purpose of this section, the term *format* means the
-    combination of media bus data format, frame width and frame height.
-
-Image formats are typically negotiated on video capture and output
-devices using the format and
-:ref:`selection <VIDIOC_SUBDEV_G_SELECTION>` ioctls. The driver is
-responsible for configuring every block in the video pipeline according
-to the requested format at the pipeline input and/or output.
-
-For complex devices, such as often found in embedded systems, identical
-image sizes at the output of a pipeline can be achieved using different
-hardware configurations. One such example is shown on
-:ref:`pipeline-scaling`, where image scaling can be performed on both
-the video sensor and the host image processing hardware.
-
-
-.. _pipeline-scaling:
-
-.. kernel-figure:: pipeline.dot
-    :alt:   pipeline.dot
-    :align: center
-
-    Image Format Negotiation on Pipelines
-
-    High quality and high speed pipeline configuration
-
-
-
-The sensor scaler is usually of less quality than the host scaler, but
-scaling on the sensor is required to achieve higher frame rates.
-Depending on the use case (quality vs. speed), the pipeline must be
-configured differently. Applications need to configure the formats at
-every point in the pipeline explicitly.
-
-Drivers that implement the :ref:`media API <media-controller-intro>`
-can expose pad-level image format configuration to applications. When
-they do, applications can use the
-:ref:`VIDIOC_SUBDEV_G_FMT <VIDIOC_SUBDEV_G_FMT>` and
-:ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctls. to
-negotiate formats on a per-pad basis.
-
-Applications are responsible for configuring coherent parameters on the
-whole pipeline and making sure that connected pads have compatible
-formats. The pipeline is checked for formats mismatch at
-:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` time, and an ``EPIPE`` error
-code is then returned if the configuration is invalid.
-
-Pad-level image format configuration support can be tested by calling
-the :ref:`VIDIOC_SUBDEV_G_FMT` ioctl on pad
-0. If the driver returns an ``EINVAL`` error code pad-level format
-configuration is not supported by the sub-device.
-
-
-Format Negotiation
-------------------
-
-Acceptable formats on pads can (and usually do) depend on a number of
-external parameters, such as formats on other pads, active links, or
-even controls. Finding a combination of formats on all pads in a video
-pipeline, acceptable to both application and driver, can't rely on
-formats enumeration only. A format negotiation mechanism is required.
-
-Central to the format negotiation mechanism are the get/set format
-operations. When called with the ``which`` argument set to
-:ref:`V4L2_SUBDEV_FORMAT_TRY <VIDIOC_SUBDEV_G_FMT>`, the
-:ref:`VIDIOC_SUBDEV_G_FMT <VIDIOC_SUBDEV_G_FMT>` and
-:ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctls operate on
-a set of formats parameters that are not connected to the hardware
-configuration. Modifying those 'try' formats leaves the device state
-untouched (this applies to both the software state stored in the driver
-and the hardware state stored in the device itself).
-
-While not kept as part of the device state, try formats are stored in
-the sub-device file handles. A
-:ref:`VIDIOC_SUBDEV_G_FMT <VIDIOC_SUBDEV_G_FMT>` call will return
-the last try format set *on the same sub-device file handle*. Several
-applications querying the same sub-device at the same time will thus not
-interact with each other.
-
-To find out whether a particular format is supported by the device,
-applications use the
-:ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctl. Drivers
-verify and, if needed, change the requested ``format`` based on device
-requirements and return the possibly modified value. Applications can
-then choose to try a different format or accept the returned value and
-continue.
-
-Formats returned by the driver during a negotiation iteration are
-guaranteed to be supported by the device. In particular, drivers
-guarantee that a returned format will not be further changed if passed
-to an :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` call as-is
-(as long as external parameters, such as formats on other pads or links'
-configuration are not changed).
-
-Drivers automatically propagate formats inside sub-devices. When a try
-or active format is set on a pad, corresponding formats on other pads of
-the same sub-device can be modified by the driver. Drivers are free to
-modify formats as required by the device. However, they should comply
-with the following rules when possible:
-
--  Formats should be propagated from sink pads to source pads. Modifying
-   a format on a source pad should not modify the format on any sink
-   pad.
-
--  Sub-devices that scale frames using variable scaling factors should
-   reset the scale factors to default values when sink pads formats are
-   modified. If the 1:1 scaling ratio is supported, this means that
-   source pads formats should be reset to the sink pads formats.
-
-Formats are not propagated across links, as that would involve
-propagating them from one sub-device file handle to another.
-Applications must then take care to configure both ends of every link
-explicitly with compatible formats. Identical formats on the two ends of
-a link are guaranteed to be compatible. Drivers are free to accept
-different formats matching device requirements as being compatible.
-
-:ref:`sample-pipeline-config` shows a sample configuration sequence
-for the pipeline described in :ref:`pipeline-scaling` (table columns
-list entity names and pad numbers).
-
-
-.. raw:: latex
-
-    \scriptsize
-
-.. tabularcolumns:: |p{2.0cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|
-
-.. _sample-pipeline-config:
-
-.. flat-table:: Sample Pipeline Configuration
-    :header-rows:  1
-    :stub-columns: 0
-    :widths: 5 5 5 5 5 5 5
-
-    * -
-      - Sensor/0
-
-        format
-      - Frontend/0
-
-        format
-      - Frontend/1
-
-        format
-      - Scaler/0
-
-        format
-      - Scaler/0
-
-        compose selection rectangle
-      - Scaler/1
-
-        format
-    * - Initial state
-      - 2048x1536
-
-        SGRBG8_1X8
-      - (default)
-      - (default)
-      - (default)
-      - (default)
-      - (default)
-    * - Configure frontend sink format
-      - 2048x1536
-
-        SGRBG8_1X8
-      - *2048x1536*
-
-        *SGRBG8_1X8*
-      - *2046x1534*
-
-        *SGRBG8_1X8*
-      - (default)
-      - (default)
-      - (default)
-    * - Configure scaler sink format
-      - 2048x1536
-
-        SGRBG8_1X8
-      - 2048x1536
-
-        SGRBG8_1X8
-      - 2046x1534
-
-        SGRBG8_1X8
-      - *2046x1534*
-
-        *SGRBG8_1X8*
-      - *0,0/2046x1534*
-      - *2046x1534*
-
-        *SGRBG8_1X8*
-    * - Configure scaler sink compose selection
-      - 2048x1536
-
-        SGRBG8_1X8
-      - 2048x1536
-
-        SGRBG8_1X8
-      - 2046x1534
-
-        SGRBG8_1X8
-      - 2046x1534
-
-        SGRBG8_1X8
-      - *0,0/1280x960*
-      - *1280x960*
-
-        *SGRBG8_1X8*
-
-.. raw:: latex
-
-    \normalsize
-
-1. Initial state. The sensor source pad format is set to its native 3MP
-   size and V4L2_MBUS_FMT_SGRBG8_1X8 media bus code. Formats on the
-   host frontend and scaler sink and source pads have the default
-   values, as well as the compose rectangle on the scaler's sink pad.
-
-2. The application configures the frontend sink pad format's size to
-   2048x1536 and its media bus code to V4L2_MBUS_FMT_SGRBG_1X8. The
-   driver propagates the format to the frontend source pad.
-
-3. The application configures the scaler sink pad format's size to
-   2046x1534 and the media bus code to V4L2_MBUS_FMT_SGRBG_1X8 to
-   match the frontend source size and media bus code. The media bus code
-   on the sink pad is set to V4L2_MBUS_FMT_SGRBG_1X8. The driver
-   propagates the size to the compose selection rectangle on the
-   scaler's sink pad, and the format to the scaler source pad.
-
-4. The application configures the size of the compose selection
-   rectangle of the scaler's sink pad 1280x960. The driver propagates
-   the size to the scaler's source pad format.
-
-When satisfied with the try results, applications can set the active
-formats by setting the ``which`` argument to
-``V4L2_SUBDEV_FORMAT_ACTIVE``. Active formats are changed exactly as try
-formats by drivers. To avoid modifying the hardware state during format
-negotiation, applications should negotiate try formats first and then
-modify the active settings using the try formats returned during the
-last negotiation iteration. This guarantees that the active format will
-be applied as-is by the driver without being modified.
-
-
-.. _v4l2-subdev-selections:
-
-Selections: cropping, scaling and composition
----------------------------------------------
-
-Many sub-devices support cropping frames on their input or output pads
-(or possible even on both). Cropping is used to select the area of
-interest in an image, typically on an image sensor or a video decoder.
-It can also be used as part of digital zoom implementations to select
-the area of the image that will be scaled up.
-
-Crop settings are defined by a crop rectangle and represented in a
-struct :c:type:`v4l2_rect` by the coordinates of the top
-left corner and the rectangle size. Both the coordinates and sizes are
-expressed in pixels.
-
-As for pad formats, drivers store try and active rectangles for the
-selection targets :ref:`v4l2-selections-common`.
-
-On sink pads, cropping is applied relative to the current pad format.
-The pad format represents the image size as received by the sub-device
-from the previous block in the pipeline, and the crop rectangle
-represents the sub-image that will be transmitted further inside the
-sub-device for processing.
-
-The scaling operation changes the size of the image by scaling it to new
-dimensions. The scaling ratio isn't specified explicitly, but is implied
-from the original and scaled image sizes. Both sizes are represented by
-struct :c:type:`v4l2_rect`.
-
-Scaling support is optional. When supported by a subdev, the crop
-rectangle on the subdev's sink pad is scaled to the size configured
-using the
-:ref:`VIDIOC_SUBDEV_S_SELECTION <VIDIOC_SUBDEV_G_SELECTION>` IOCTL
-using ``V4L2_SEL_TGT_COMPOSE`` selection target on the same pad. If the
-subdev supports scaling but not composing, the top and left values are
-not used and must always be set to zero.
-
-On source pads, cropping is similar to sink pads, with the exception
-that the source size from which the cropping is performed, is the
-COMPOSE rectangle on the sink pad. In both sink and source pads, the
-crop rectangle must be entirely contained inside the source image size
-for the crop operation.
-
-The drivers should always use the closest possible rectangle the user
-requests on all selection targets, unless specifically told otherwise.
-``V4L2_SEL_FLAG_GE`` and ``V4L2_SEL_FLAG_LE`` flags may be used to round
-the image size either up or down. :ref:`v4l2-selection-flags`
-
-
-Types of selection targets
---------------------------
-
-
-Actual targets
-^^^^^^^^^^^^^^
-
-Actual targets (without a postfix) reflect the actual hardware
-configuration at any point of time. There is a BOUNDS target
-corresponding to every actual target.
-
-
-BOUNDS targets
-^^^^^^^^^^^^^^
-
-BOUNDS targets is the smallest rectangle that contains all valid actual
-rectangles. It may not be possible to set the actual rectangle as large
-as the BOUNDS rectangle, however. This may be because e.g. a sensor's
-pixel array is not rectangular but cross-shaped or round. The maximum
-size may also be smaller than the BOUNDS rectangle.
-
-
-Order of configuration and format propagation
----------------------------------------------
-
-Inside subdevs, the order of image processing steps will always be from
-the sink pad towards the source pad. This is also reflected in the order
-in which the configuration must be performed by the user: the changes
-made will be propagated to any subsequent stages. If this behaviour is
-not desired, the user must set ``V4L2_SEL_FLAG_KEEP_CONFIG`` flag. This
-flag causes no propagation of the changes are allowed in any
-circumstances. This may also cause the accessed rectangle to be adjusted
-by the driver, depending on the properties of the underlying hardware.
-
-The coordinates to a step always refer to the actual size of the
-previous step. The exception to this rule is the sink compose
-rectangle, which refers to the sink compose bounds rectangle --- if it
-is supported by the hardware.
-
-1. Sink pad format. The user configures the sink pad format. This format
-   defines the parameters of the image the entity receives through the
-   pad for further processing.
-
-2. Sink pad actual crop selection. The sink pad crop defines the crop
-   performed to the sink pad format.
-
-3. Sink pad actual compose selection. The size of the sink pad compose
-   rectangle defines the scaling ratio compared to the size of the sink
-   pad crop rectangle. The location of the compose rectangle specifies
-   the location of the actual sink compose rectangle in the sink compose
-   bounds rectangle.
-
-4. Source pad actual crop selection. Crop on the source pad defines crop
-   performed to the image in the sink compose bounds rectangle.
-
-5. Source pad format. The source pad format defines the output pixel
-   format of the subdev, as well as the other parameters with the
-   exception of the image width and height. Width and height are defined
-   by the size of the source pad actual crop selection.
-
-Accessing any of the above rectangles not supported by the subdev will
-return ``EINVAL``. Any rectangle referring to a previous unsupported
-rectangle coordinates will instead refer to the previous supported
-rectangle. For example, if sink crop is not supported, the compose
-selection will refer to the sink pad format dimensions instead.
-
-
-.. _subdev-image-processing-crop:
-
-.. kernel-figure:: subdev-image-processing-crop.svg
-    :alt:   subdev-image-processing-crop.svg
-    :align: center
-
-    **Figure 4.5. Image processing in subdevs: simple crop example**
-
-In the above example, the subdev supports cropping on its sink pad. To
-configure it, the user sets the media bus format on the subdev's sink
-pad. Now the actual crop rectangle can be set on the sink pad --- the
-location and size of this rectangle reflect the location and size of a
-rectangle to be cropped from the sink format. The size of the sink crop
-rectangle will also be the size of the format of the subdev's source
-pad.
-
-
-.. _subdev-image-processing-scaling-multi-source:
-
-.. kernel-figure:: subdev-image-processing-scaling-multi-source.svg
-    :alt:   subdev-image-processing-scaling-multi-source.svg
-    :align: center
-
-    **Figure 4.6. Image processing in subdevs: scaling with multiple sources**
-
-In this example, the subdev is capable of first cropping, then scaling
-and finally cropping for two source pads individually from the resulting
-scaled image. The location of the scaled image in the cropped image is
-ignored in sink compose target. Both of the locations of the source crop
-rectangles refer to the sink scaling rectangle, independently cropping
-an area at location specified by the source crop rectangle from it.
-
-
-.. _subdev-image-processing-full:
-
-.. kernel-figure:: subdev-image-processing-full.svg
-    :alt:    subdev-image-processing-full.svg
-    :align:  center
-
-    **Figure 4.7. Image processing in subdevs: scaling and composition with multiple sinks and sources**
-
-The subdev driver supports two sink pads and two source pads. The images
-from both of the sink pads are individually cropped, then scaled and
-further composed on the composition bounds rectangle. From that, two
-independent streams are cropped and sent out of the subdev from the
-source pads.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    subdev-formats
diff --git a/Documentation/media/uapi/v4l/dev-touch.rst b/Documentation/media/uapi/v4l/dev-touch.rst
deleted file mode 100644
index 356f01385221..000000000000
--- a/Documentation/media/uapi/v4l/dev-touch.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _touch:
-
-*************
-Touch Devices
-*************
-
-Touch devices are accessed through character device special files named
-``/dev/v4l-touch0`` to ``/dev/v4l-touch255`` with major number 81 and
-dynamically allocated minor numbers 0 to 255.
-
-Overview
-========
-
-Sensors may be Optical, or Projected Capacitive touch (PCT).
-
-Processing is required to analyse the raw data and produce input events. In
-some systems, this may be performed on the ASIC and the raw data is purely a
-side-channel for diagnostics or tuning. In other systems, the ASIC is a simple
-analogue front end device which delivers touch data at high rate, and any touch
-processing must be done on the host.
-
-For capacitive touch sensing, the touchscreen is composed of an array of
-horizontal and vertical conductors (alternatively called rows/columns, X/Y
-lines, or tx/rx). Mutual Capacitance measured is at the nodes where the
-conductors cross. Alternatively, Self Capacitance measures the signal from each
-column and row independently.
-
-A touch input may be determined by comparing the raw capacitance measurement to
-a no-touch reference (or "baseline") measurement:
-
-Delta = Raw - Reference
-
-The reference measurement takes account of variations in the capacitance across
-the touch sensor matrix, for example manufacturing irregularities,
-environmental or edge effects.
-
-Querying Capabilities
-=====================
-
-Devices supporting the touch interface set the ``V4L2_CAP_VIDEO_CAPTURE`` flag
-and the ``V4L2_CAP_TOUCH`` flag in the ``capabilities`` field of
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl.
-
-At least one of the read/write or streaming I/O methods must be
-supported.
-
-The formats supported by touch devices are documented in
-:ref:`Touch Formats <tch-formats>`.
-
-Data Format Negotiation
-=======================
-
-A touch device may support any I/O method.
diff --git a/Documentation/media/uapi/v4l/devices.rst b/Documentation/media/uapi/v4l/devices.rst
deleted file mode 100644
index 07f8d047662b..000000000000
--- a/Documentation/media/uapi/v4l/devices.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _devices:
-
-**********
-Interfaces
-**********
-
-
-.. toctree::
-    :maxdepth: 1
-
-    dev-capture
-    dev-overlay
-    dev-output
-    dev-osd
-    dev-mem2mem
-    dev-raw-vbi
-    dev-sliced-vbi
-    dev-radio
-    dev-rds
-    dev-sdr
-    dev-touch
-    dev-event
-    dev-subdev
-    dev-meta
diff --git a/Documentation/media/uapi/v4l/diff-v4l.rst b/Documentation/media/uapi/v4l/diff-v4l.rst
deleted file mode 100644
index dd6739e8a5b2..000000000000
--- a/Documentation/media/uapi/v4l/diff-v4l.rst
+++ /dev/null
@@ -1,693 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _diff-v4l:
-
-********************************
-Differences between V4L and V4L2
-********************************
-
-The Video For Linux API was first introduced in Linux 2.1 to unify and
-replace various TV and radio device related interfaces, developed
-independently by driver writers in prior years. Starting with Linux 2.5
-the much improved V4L2 API replaces the V4L API. The support for the old
-V4L calls were removed from Kernel, but the library :ref:`libv4l`
-supports the conversion of a V4L API system call into a V4L2 one.
-
-
-Opening and Closing Devices
-===========================
-
-For compatibility reasons the character device file names recommended
-for V4L2 video capture, overlay, radio and raw vbi capture devices did
-not change from those used by V4L. They are listed in :ref:`devices`
-and below in :ref:`v4l-dev`.
-
-The teletext devices (minor range 192-223) have been removed in V4L2 and
-no longer exist. There is no hardware available anymore for handling
-pure teletext. Instead raw or sliced VBI is used.
-
-The V4L ``videodev`` module automatically assigns minor numbers to
-drivers in load order, depending on the registered device type. We
-recommend that V4L2 drivers by default register devices with the same
-numbers, but the system administrator can assign arbitrary minor numbers
-using driver module options. The major device number remains 81.
-
-
-.. _v4l-dev:
-
-.. flat-table:: V4L Device Types, Names and Numbers
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Device Type
-      - File Name
-      - Minor Numbers
-    * - Video capture and overlay
-      - ``/dev/video`` and ``/dev/bttv0``\  [#f1]_, ``/dev/video0`` to
-	``/dev/video63``
-      - 0-63
-    * - Radio receiver
-      - ``/dev/radio``\  [#f2]_, ``/dev/radio0`` to ``/dev/radio63``
-      - 64-127
-    * - Raw VBI capture
-      - ``/dev/vbi``, ``/dev/vbi0`` to ``/dev/vbi31``
-      - 224-255
-
-
-V4L prohibits (or used to prohibit) multiple opens of a device file.
-V4L2 drivers *may* support multiple opens, see :ref:`open` for details
-and consequences.
-
-V4L drivers respond to V4L2 ioctls with an ``EINVAL`` error code.
-
-
-Querying Capabilities
-=====================
-
-The V4L ``VIDIOCGCAP`` ioctl is equivalent to V4L2's
-:ref:`VIDIOC_QUERYCAP`.
-
-The ``name`` field in struct ``video_capability`` became
-``card`` in struct :c:type:`v4l2_capability`, ``type``
-was replaced by ``capabilities``. Note V4L2 does not distinguish between
-device types like this, better think of basic video input, video output
-and radio devices supporting a set of related functions like video
-capturing, video overlay and VBI capturing. See :ref:`open` for an
-introduction.
-
-.. tabularcolumns:: |p{5.5cm}|p{6.5cm}|p{5.5cm}
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - ``struct video_capability`` ``type``
-      - struct :c:type:`v4l2_capability`
-	``capabilities`` flags
-      - Purpose
-    * - ``VID_TYPE_CAPTURE``
-      - ``V4L2_CAP_VIDEO_CAPTURE``
-      - The :ref:`video capture <capture>` interface is supported.
-    * - ``VID_TYPE_TUNER``
-      - ``V4L2_CAP_TUNER``
-      - The device has a :ref:`tuner or modulator <tuner>`.
-    * - ``VID_TYPE_TELETEXT``
-      - ``V4L2_CAP_VBI_CAPTURE``
-      - The :ref:`raw VBI capture <raw-vbi>` interface is supported.
-    * - ``VID_TYPE_OVERLAY``
-      - ``V4L2_CAP_VIDEO_OVERLAY``
-      - The :ref:`video overlay <overlay>` interface is supported.
-    * - ``VID_TYPE_CHROMAKEY``
-      - ``V4L2_FBUF_CAP_CHROMAKEY`` in field ``capability`` of struct
-	:c:type:`v4l2_framebuffer`
-      - Whether chromakey overlay is supported. For more information on
-	overlay see :ref:`overlay`.
-    * - ``VID_TYPE_CLIPPING``
-      - ``V4L2_FBUF_CAP_LIST_CLIPPING`` and
-	``V4L2_FBUF_CAP_BITMAP_CLIPPING`` in field ``capability`` of
-	struct :c:type:`v4l2_framebuffer`
-      - Whether clipping the overlaid image is supported, see
-	:ref:`overlay`.
-    * - ``VID_TYPE_FRAMERAM``
-      - ``V4L2_FBUF_CAP_EXTERNOVERLAY`` *not set* in field ``capability``
-	of struct :c:type:`v4l2_framebuffer`
-      - Whether overlay overwrites frame buffer memory, see
-	:ref:`overlay`.
-    * - ``VID_TYPE_SCALES``
-      - ``-``
-      - This flag indicates if the hardware can scale images. The V4L2 API
-	implies the scale factor by setting the cropping dimensions and
-	image size with the :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` and
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, respectively. The
-	driver returns the closest sizes possible. For more information on
-	cropping and scaling see :ref:`crop`.
-    * - ``VID_TYPE_MONOCHROME``
-      - ``-``
-      - Applications can enumerate the supported image formats with the
-	:ref:`VIDIOC_ENUM_FMT` ioctl to determine if
-	the device supports grey scale capturing only. For more
-	information on image formats see :ref:`pixfmt`.
-    * - ``VID_TYPE_SUBCAPTURE``
-      - ``-``
-      - Applications can call the :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>`
-	ioctl to determine if the device supports capturing a subsection
-	of the full picture ("cropping" in V4L2). If not, the ioctl
-	returns the ``EINVAL`` error code. For more information on cropping
-	and scaling see :ref:`crop`.
-    * - ``VID_TYPE_MPEG_DECODER``
-      - ``-``
-      - Applications can enumerate the supported image formats with the
-	:ref:`VIDIOC_ENUM_FMT` ioctl to determine if
-	the device supports MPEG streams.
-    * - ``VID_TYPE_MPEG_ENCODER``
-      - ``-``
-      - See above.
-    * - ``VID_TYPE_MJPEG_DECODER``
-      - ``-``
-      - See above.
-    * - ``VID_TYPE_MJPEG_ENCODER``
-      - ``-``
-      - See above.
-
-
-The ``audios`` field was replaced by ``capabilities`` flag
-``V4L2_CAP_AUDIO``, indicating *if* the device has any audio inputs or
-outputs. To determine their number applications can enumerate audio
-inputs with the :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` ioctl. The
-audio ioctls are described in :ref:`audio`.
-
-The ``maxwidth``, ``maxheight``, ``minwidth`` and ``minheight`` fields
-were removed. Calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` or
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl with the desired
-dimensions returns the closest size possible, taking into account the
-current video standard, cropping and scaling limitations.
-
-
-Video Sources
-=============
-
-V4L provides the ``VIDIOCGCHAN`` and ``VIDIOCSCHAN`` ioctl using struct
-``video_channel`` to enumerate the video inputs of a V4L
-device. The equivalent V4L2 ioctls are
-:ref:`VIDIOC_ENUMINPUT`,
-:ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` and
-:ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` using struct
-:c:type:`v4l2_input` as discussed in :ref:`video`.
-
-The ``channel`` field counting inputs was renamed to ``index``, the
-video input types were renamed as follows:
-
-
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - struct ``video_channel`` ``type``
-      - struct :c:type:`v4l2_input` ``type``
-    * - ``VIDEO_TYPE_TV``
-      - ``V4L2_INPUT_TYPE_TUNER``
-    * - ``VIDEO_TYPE_CAMERA``
-      - ``V4L2_INPUT_TYPE_CAMERA``
-
-
-Unlike the ``tuners`` field expressing the number of tuners of this
-input, V4L2 assumes each video input is connected to at most one tuner.
-However a tuner can have more than one input, i. e. RF connectors, and a
-device can have multiple tuners. The index number of the tuner
-associated with the input, if any, is stored in field ``tuner`` of
-struct :c:type:`v4l2_input`. Enumeration of tuners is
-discussed in :ref:`tuner`.
-
-The redundant ``VIDEO_VC_TUNER`` flag was dropped. Video inputs
-associated with a tuner are of type ``V4L2_INPUT_TYPE_TUNER``. The
-``VIDEO_VC_AUDIO`` flag was replaced by the ``audioset`` field. V4L2
-considers devices with up to 32 audio inputs. Each set bit in the
-``audioset`` field represents one audio input this video input combines
-with. For information about audio inputs and how to switch between them
-see :ref:`audio`.
-
-The ``norm`` field describing the supported video standards was replaced
-by ``std``. The V4L specification mentions a flag ``VIDEO_VC_NORM``
-indicating whether the standard can be changed. This flag was a later
-addition together with the ``norm`` field and has been removed in the
-meantime. V4L2 has a similar, albeit more comprehensive approach to
-video standards, see :ref:`standard` for more information.
-
-
-Tuning
-======
-
-The V4L ``VIDIOCGTUNER`` and ``VIDIOCSTUNER`` ioctl and struct
-``video_tuner`` can be used to enumerate the tuners of a
-V4L TV or radio device. The equivalent V4L2 ioctls are
-:ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>` and
-:ref:`VIDIOC_S_TUNER <VIDIOC_G_TUNER>` using struct
-:c:type:`v4l2_tuner`. Tuners are covered in :ref:`tuner`.
-
-The ``tuner`` field counting tuners was renamed to ``index``. The fields
-``name``, ``rangelow`` and ``rangehigh`` remained unchanged.
-
-The ``VIDEO_TUNER_PAL``, ``VIDEO_TUNER_NTSC`` and ``VIDEO_TUNER_SECAM``
-flags indicating the supported video standards were dropped. This
-information is now contained in the associated struct
-:c:type:`v4l2_input`. No replacement exists for the
-``VIDEO_TUNER_NORM`` flag indicating whether the video standard can be
-switched. The ``mode`` field to select a different video standard was
-replaced by a whole new set of ioctls and structures described in
-:ref:`standard`. Due to its ubiquity it should be mentioned the BTTV
-driver supports several standards in addition to the regular
-``VIDEO_MODE_PAL`` (0), ``VIDEO_MODE_NTSC``, ``VIDEO_MODE_SECAM`` and
-``VIDEO_MODE_AUTO`` (3). Namely N/PAL Argentina, M/PAL, N/PAL, and NTSC
-Japan with numbers 3-6 (sic).
-
-The ``VIDEO_TUNER_STEREO_ON`` flag indicating stereo reception became
-``V4L2_TUNER_SUB_STEREO`` in field ``rxsubchans``. This field also
-permits the detection of monaural and bilingual audio, see the
-definition of struct :c:type:`v4l2_tuner` for details.
-Presently no replacement exists for the ``VIDEO_TUNER_RDS_ON`` and
-``VIDEO_TUNER_MBS_ON`` flags.
-
-The ``VIDEO_TUNER_LOW`` flag was renamed to ``V4L2_TUNER_CAP_LOW`` in
-the struct :c:type:`v4l2_tuner` ``capability`` field.
-
-The ``VIDIOCGFREQ`` and ``VIDIOCSFREQ`` ioctl to change the tuner
-frequency where renamed to
-:ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` and
-:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>`. They take a pointer
-to a struct :c:type:`v4l2_frequency` instead of an
-unsigned long integer.
-
-
-.. _v4l-image-properties:
-
-Image Properties
-================
-
-V4L2 has no equivalent of the ``VIDIOCGPICT`` and ``VIDIOCSPICT`` ioctl
-and struct ``video_picture``. The following fields where
-replaced by V4L2 controls accessible with the
-:ref:`VIDIOC_QUERYCTRL`,
-:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
-:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls:
-
-
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - struct ``video_picture``
-      - V4L2 Control ID
-    * - ``brightness``
-      - ``V4L2_CID_BRIGHTNESS``
-    * - ``hue``
-      - ``V4L2_CID_HUE``
-    * - ``colour``
-      - ``V4L2_CID_SATURATION``
-    * - ``contrast``
-      - ``V4L2_CID_CONTRAST``
-    * - ``whiteness``
-      - ``V4L2_CID_WHITENESS``
-
-
-The V4L picture controls are assumed to range from 0 to 65535 with no
-particular reset value. The V4L2 API permits arbitrary limits and
-defaults which can be queried with the
-:ref:`VIDIOC_QUERYCTRL` ioctl. For general
-information about controls see :ref:`control`.
-
-The ``depth`` (average number of bits per pixel) of a video image is
-implied by the selected image format. V4L2 does not explicitly provide
-such information assuming applications recognizing the format are aware
-of the image depth and others need not know. The ``palette`` field moved
-into the struct :c:type:`v4l2_pix_format`:
-
-
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - struct ``video_picture`` ``palette``
-      - struct :c:type:`v4l2_pix_format` ``pixfmt``
-    * - ``VIDEO_PALETTE_GREY``
-      - :ref:`V4L2_PIX_FMT_GREY <V4L2-PIX-FMT-GREY>`
-    * - ``VIDEO_PALETTE_HI240``
-      - :ref:`V4L2_PIX_FMT_HI240 <pixfmt-reserved>` [#f3]_
-    * - ``VIDEO_PALETTE_RGB565``
-      - :ref:`V4L2_PIX_FMT_RGB565 <pixfmt-rgb>`
-    * - ``VIDEO_PALETTE_RGB555``
-      - :ref:`V4L2_PIX_FMT_RGB555 <pixfmt-rgb>`
-    * - ``VIDEO_PALETTE_RGB24``
-      - :ref:`V4L2_PIX_FMT_BGR24 <pixfmt-rgb>`
-    * - ``VIDEO_PALETTE_RGB32``
-      - :ref:`V4L2_PIX_FMT_BGR32 <pixfmt-rgb>` [#f4]_
-    * - ``VIDEO_PALETTE_YUV422``
-      - :ref:`V4L2_PIX_FMT_YUYV <V4L2-PIX-FMT-YUYV>`
-    * - ``VIDEO_PALETTE_YUYV``\  [#f5]_
-      - :ref:`V4L2_PIX_FMT_YUYV <V4L2-PIX-FMT-YUYV>`
-    * - ``VIDEO_PALETTE_UYVY``
-      - :ref:`V4L2_PIX_FMT_UYVY <V4L2-PIX-FMT-UYVY>`
-    * - ``VIDEO_PALETTE_YUV420``
-      - None
-    * - ``VIDEO_PALETTE_YUV411``
-      - :ref:`V4L2_PIX_FMT_Y41P <V4L2-PIX-FMT-Y41P>` [#f6]_
-    * - ``VIDEO_PALETTE_RAW``
-      - None [#f7]_
-    * - ``VIDEO_PALETTE_YUV422P``
-      - :ref:`V4L2_PIX_FMT_YUV422P <V4L2-PIX-FMT-YUV422P>`
-    * - ``VIDEO_PALETTE_YUV411P``
-      - :ref:`V4L2_PIX_FMT_YUV411P <V4L2-PIX-FMT-YUV411P>` [#f8]_
-    * - ``VIDEO_PALETTE_YUV420P``
-      - :ref:`V4L2_PIX_FMT_YVU420 <V4L2-PIX-FMT-YVU420>`
-    * - ``VIDEO_PALETTE_YUV410P``
-      - :ref:`V4L2_PIX_FMT_YVU410 <V4L2-PIX-FMT-YVU410>`
-
-
-V4L2 image formats are defined in :ref:`pixfmt`. The image format can
-be selected with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
-
-
-Audio
-=====
-
-The ``VIDIOCGAUDIO`` and ``VIDIOCSAUDIO`` ioctl and struct
-``video_audio`` are used to enumerate the audio inputs
-of a V4L device. The equivalent V4L2 ioctls are
-:ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` and
-:ref:`VIDIOC_S_AUDIO <VIDIOC_G_AUDIO>` using struct
-:c:type:`v4l2_audio` as discussed in :ref:`audio`.
-
-The ``audio`` "channel number" field counting audio inputs was renamed
-to ``index``.
-
-On ``VIDIOCSAUDIO`` the ``mode`` field selects *one* of the
-``VIDEO_SOUND_MONO``, ``VIDEO_SOUND_STEREO``, ``VIDEO_SOUND_LANG1`` or
-``VIDEO_SOUND_LANG2`` audio demodulation modes. When the current audio
-standard is BTSC ``VIDEO_SOUND_LANG2`` refers to SAP and
-``VIDEO_SOUND_LANG1`` is meaningless. Also undocumented in the V4L
-specification, there is no way to query the selected mode. On
-``VIDIOCGAUDIO`` the driver returns the *actually received* audio
-programmes in this field. In the V4L2 API this information is stored in
-the struct :c:type:`v4l2_tuner` ``rxsubchans`` and
-``audmode`` fields, respectively. See :ref:`tuner` for more
-information on tuners. Related to audio modes struct
-:c:type:`v4l2_audio` also reports if this is a mono or
-stereo input, regardless if the source is a tuner.
-
-The following fields where replaced by V4L2 controls accessible with the
-:ref:`VIDIOC_QUERYCTRL`,
-:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
-:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls:
-
-
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - struct ``video_audio``
-      - V4L2 Control ID
-    * - ``volume``
-      - ``V4L2_CID_AUDIO_VOLUME``
-    * - ``bass``
-      - ``V4L2_CID_AUDIO_BASS``
-    * - ``treble``
-      - ``V4L2_CID_AUDIO_TREBLE``
-    * - ``balance``
-      - ``V4L2_CID_AUDIO_BALANCE``
-
-
-To determine which of these controls are supported by a driver V4L
-provides the ``flags`` ``VIDEO_AUDIO_VOLUME``, ``VIDEO_AUDIO_BASS``,
-``VIDEO_AUDIO_TREBLE`` and ``VIDEO_AUDIO_BALANCE``. In the V4L2 API the
-:ref:`VIDIOC_QUERYCTRL` ioctl reports if the
-respective control is supported. Accordingly the ``VIDEO_AUDIO_MUTABLE``
-and ``VIDEO_AUDIO_MUTE`` flags where replaced by the boolean
-``V4L2_CID_AUDIO_MUTE`` control.
-
-All V4L2 controls have a ``step`` attribute replacing the struct
-``video_audio`` ``step`` field. The V4L audio controls
-are assumed to range from 0 to 65535 with no particular reset value. The
-V4L2 API permits arbitrary limits and defaults which can be queried with
-the :ref:`VIDIOC_QUERYCTRL` ioctl. For general
-information about controls see :ref:`control`.
-
-
-Frame Buffer Overlay
-====================
-
-The V4L2 ioctls equivalent to ``VIDIOCGFBUF`` and ``VIDIOCSFBUF`` are
-:ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` and
-:ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`. The ``base`` field of struct
-``video_buffer`` remained unchanged, except V4L2 defines
-a flag to indicate non-destructive overlays instead of a ``NULL``
-pointer. All other fields moved into the struct
-:c:type:`v4l2_pix_format` ``fmt`` substructure of
-struct :c:type:`v4l2_framebuffer`. The ``depth``
-field was replaced by ``pixelformat``. See :ref:`pixfmt-rgb` for a
-list of RGB formats and their respective color depths.
-
-Instead of the special ioctls ``VIDIOCGWIN`` and ``VIDIOCSWIN`` V4L2
-uses the general-purpose data format negotiation ioctls
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`. They take a pointer to a struct
-:c:type:`v4l2_format` as argument. Here the ``win`` member
-of the ``fmt`` union is used, a struct
-:c:type:`v4l2_window`.
-
-The ``x``, ``y``, ``width`` and ``height`` fields of struct
-``video_window`` moved into struct
-:c:type:`v4l2_rect` substructure ``w`` of struct
-:c:type:`v4l2_window`. The ``chromakey``, ``clips``, and
-``clipcount`` fields remained unchanged. Struct
-``video_clip`` was renamed to struct
-:c:type:`v4l2_clip`, also containing a struct
-:c:type:`v4l2_rect`, but the semantics are still the same.
-
-The ``VIDEO_WINDOW_INTERLACE`` flag was dropped. Instead applications
-must set the ``field`` field to ``V4L2_FIELD_ANY`` or
-``V4L2_FIELD_INTERLACED``. The ``VIDEO_WINDOW_CHROMAKEY`` flag moved
-into struct :c:type:`v4l2_framebuffer`, under the new
-name ``V4L2_FBUF_FLAG_CHROMAKEY``.
-
-In V4L, storing a bitmap pointer in ``clips`` and setting ``clipcount``
-to ``VIDEO_CLIP_BITMAP`` (-1) requests bitmap clipping, using a fixed
-size bitmap of 1024 × 625 bits. Struct :c:type:`v4l2_window`
-has a separate ``bitmap`` pointer field for this purpose and the bitmap
-size is determined by ``w.width`` and ``w.height``.
-
-The ``VIDIOCCAPTURE`` ioctl to enable or disable overlay was renamed to
-:ref:`VIDIOC_OVERLAY`.
-
-
-Cropping
-========
-
-To capture only a subsection of the full picture V4L defines the
-``VIDIOCGCAPTURE`` and ``VIDIOCSCAPTURE`` ioctls using struct
-``video_capture``. The equivalent V4L2 ioctls are
-:ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and
-:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` using struct
-:c:type:`v4l2_crop`, and the related
-:ref:`VIDIOC_CROPCAP` ioctl. This is a rather
-complex matter, see :ref:`crop` for details.
-
-The ``x``, ``y``, ``width`` and ``height`` fields moved into struct
-:c:type:`v4l2_rect` substructure ``c`` of struct
-:c:type:`v4l2_crop`. The ``decimation`` field was dropped. In
-the V4L2 API the scaling factor is implied by the size of the cropping
-rectangle and the size of the captured or overlaid image.
-
-The ``VIDEO_CAPTURE_ODD`` and ``VIDEO_CAPTURE_EVEN`` flags to capture
-only the odd or even field, respectively, were replaced by
-``V4L2_FIELD_TOP`` and ``V4L2_FIELD_BOTTOM`` in the field named
-``field`` of struct :c:type:`v4l2_pix_format` and
-struct :c:type:`v4l2_window`. These structures are used to
-select a capture or overlay format with the
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
-
-
-Reading Images, Memory Mapping
-==============================
-
-
-Capturing using the read method
--------------------------------
-
-There is no essential difference between reading images from a V4L or
-V4L2 device using the :ref:`read() <func-read>` function, however V4L2
-drivers are not required to support this I/O method. Applications can
-determine if the function is available with the
-:ref:`VIDIOC_QUERYCAP` ioctl. All V4L2 devices
-exchanging data with applications must support the
-:ref:`select() <func-select>` and :ref:`poll() <func-poll>`
-functions.
-
-To select an image format and size, V4L provides the ``VIDIOCSPICT`` and
-``VIDIOCSWIN`` ioctls. V4L2 uses the general-purpose data format
-negotiation ioctls :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`. They take a pointer to a struct
-:c:type:`v4l2_format` as argument, here the struct
-:c:type:`v4l2_pix_format` named ``pix`` of its
-``fmt`` union is used.
-
-For more information about the V4L2 read interface see :ref:`rw`.
-
-
-Capturing using memory mapping
-------------------------------
-
-Applications can read from V4L devices by mapping buffers in device
-memory, or more often just buffers allocated in DMA-able system memory,
-into their address space. This avoids the data copying overhead of the
-read method. V4L2 supports memory mapping as well, with a few
-differences.
-
-
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - V4L
-      - V4L2
-    * -
-      - The image format must be selected before buffers are allocated,
-	with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. When no
-	format is selected the driver may use the last, possibly by
-	another application requested format.
-    * - Applications cannot change the number of buffers. The it is built
-	into the driver, unless it has a module option to change the
-	number when the driver module is loaded.
-      - The :ref:`VIDIOC_REQBUFS` ioctl allocates the
-	desired number of buffers, this is a required step in the
-	initialization sequence.
-    * - Drivers map all buffers as one contiguous range of memory. The
-	``VIDIOCGMBUF`` ioctl is available to query the number of buffers,
-	the offset of each buffer from the start of the virtual file, and
-	the overall amount of memory used, which can be used as arguments
-	for the :ref:`mmap() <func-mmap>` function.
-      - Buffers are individually mapped. The offset and size of each
-	buffer can be determined with the
-	:ref:`VIDIOC_QUERYBUF` ioctl.
-    * - The ``VIDIOCMCAPTURE`` ioctl prepares a buffer for capturing. It
-	also determines the image format for this buffer. The ioctl
-	returns immediately, eventually with an ``EAGAIN`` error code if no
-	video signal had been detected. When the driver supports more than
-	one buffer applications can call the ioctl multiple times and thus
-	have multiple outstanding capture requests.
-
-	The ``VIDIOCSYNC`` ioctl suspends execution until a particular
-	buffer has been filled.
-      - Drivers maintain an incoming and outgoing queue.
-	:ref:`VIDIOC_QBUF` enqueues any empty buffer into
-	the incoming queue. Filled buffers are dequeued from the outgoing
-	queue with the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. To wait
-	until filled buffers become available this function,
-	:ref:`select() <func-select>` or :ref:`poll() <func-poll>` can
-	be used. The :ref:`VIDIOC_STREAMON` ioctl
-	must be called once after enqueuing one or more buffers to start
-	capturing. Its counterpart
-	:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` stops capturing and
-	dequeues all buffers from both queues. Applications can query the
-	signal status, if known, with the
-	:ref:`VIDIOC_ENUMINPUT` ioctl.
-
-
-For a more in-depth discussion of memory mapping and examples, see
-:ref:`mmap`.
-
-
-Reading Raw VBI Data
-====================
-
-Originally the V4L API did not specify a raw VBI capture interface, only
-the device file ``/dev/vbi`` was reserved for this purpose. The only
-driver supporting this interface was the BTTV driver, de-facto defining
-the V4L VBI interface. Reading from the device yields a raw VBI image
-with the following parameters:
-
-
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - struct :c:type:`v4l2_vbi_format`
-      - V4L, BTTV driver
-    * - sampling_rate
-      - 28636363 Hz NTSC (or any other 525-line standard); 35468950 Hz PAL
-	and SECAM (625-line standards)
-    * - offset
-      - ?
-    * - samples_per_line
-      - 2048
-    * - sample_format
-      - V4L2_PIX_FMT_GREY. The last four bytes (a machine endianness
-	integer) contain a frame counter.
-    * - start[]
-      - 10, 273 NTSC; 22, 335 PAL and SECAM
-    * - count[]
-      - 16, 16 [#f9]_
-    * - flags
-      - 0
-
-
-Undocumented in the V4L specification, in Linux 2.3 the
-``VIDIOCGVBIFMT`` and ``VIDIOCSVBIFMT`` ioctls using struct
-``vbi_format`` were added to determine the VBI image
-parameters. These ioctls are only partially compatible with the V4L2 VBI
-interface specified in :ref:`raw-vbi`.
-
-An ``offset`` field does not exist, ``sample_format`` is supposed to be
-``VIDEO_PALETTE_RAW``, equivalent to ``V4L2_PIX_FMT_GREY``. The
-remaining fields are probably equivalent to struct
-:c:type:`v4l2_vbi_format`.
-
-Apparently only the Zoran (ZR 36120) driver implements these ioctls. The
-semantics differ from those specified for V4L2 in two ways. The
-parameters are reset on :ref:`open() <func-open>` and
-``VIDIOCSVBIFMT`` always returns an ``EINVAL`` error code if the parameters
-are invalid.
-
-
-Miscellaneous
-=============
-
-V4L2 has no equivalent of the ``VIDIOCGUNIT`` ioctl. Applications can
-find the VBI device associated with a video capture device (or vice
-versa) by reopening the device and requesting VBI data. For details see
-:ref:`open`.
-
-No replacement exists for ``VIDIOCKEY``, and the V4L functions for
-microcode programming. A new interface for MPEG compression and playback
-devices is documented in :ref:`extended-controls`.
-
-.. [#f1]
-   According to Documentation/admin-guide/devices.rst these should be symbolic links
-   to ``/dev/video0``. Note the original bttv interface is not
-   compatible with V4L or V4L2.
-
-.. [#f2]
-   According to ``Documentation/admin-guide/devices.rst`` a symbolic link to
-   ``/dev/radio0``.
-
-.. [#f3]
-   This is a custom format used by the BTTV driver, not one of the V4L2
-   standard formats.
-
-.. [#f4]
-   Presumably all V4L RGB formats are little-endian, although some
-   drivers might interpret them according to machine endianness. V4L2
-   defines little-endian, big-endian and red/blue swapped variants. For
-   details see :ref:`pixfmt-rgb`.
-
-.. [#f5]
-   ``VIDEO_PALETTE_YUV422`` and ``VIDEO_PALETTE_YUYV`` are the same
-   formats. Some V4L drivers respond to one, some to the other.
-
-.. [#f6]
-   Not to be confused with ``V4L2_PIX_FMT_YUV411P``, which is a planar
-   format.
-
-.. [#f7]
-   V4L explains this as: "RAW capture (BT848)"
-
-.. [#f8]
-   Not to be confused with ``V4L2_PIX_FMT_Y41P``, which is a packed
-   format.
-
-.. [#f9]
-   Old driver versions used different values, eventually the custom
-   ``BTTV_VBISIZE`` ioctl was added to query the correct values.
diff --git a/Documentation/media/uapi/v4l/dmabuf.rst b/Documentation/media/uapi/v4l/dmabuf.rst
deleted file mode 100644
index bb8fd943b14e..000000000000
--- a/Documentation/media/uapi/v4l/dmabuf.rst
+++ /dev/null
@@ -1,169 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dmabuf:
-
-************************************
-Streaming I/O (DMA buffer importing)
-************************************
-
-The DMABUF framework provides a generic method for sharing buffers
-between multiple devices. Device drivers that support DMABUF can export
-a DMA buffer to userspace as a file descriptor (known as the exporter
-role), import a DMA buffer from userspace using a file descriptor
-previously exported for a different or the same device (known as the
-importer role), or both. This section describes the DMABUF importer role
-API in V4L2.
-
-Refer to :ref:`DMABUF exporting <VIDIOC_EXPBUF>` for details about
-exporting V4L2 buffers as DMABUF file descriptors.
-
-Input and output devices support the streaming I/O method when the
-``V4L2_CAP_STREAMING`` flag in the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP <VIDIOC_QUERYCAP>` ioctl is set. Whether
-importing DMA buffers through DMABUF file descriptors is supported is
-determined by calling the :ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`
-ioctl with the memory type set to ``V4L2_MEMORY_DMABUF``.
-
-This I/O method is dedicated to sharing DMA buffers between different
-devices, which may be V4L devices or other video-related devices (e.g.
-DRM). Buffers (planes) are allocated by a driver on behalf of an
-application. Next, these buffers are exported to the application as file
-descriptors using an API which is specific for an allocator driver. Only
-such file descriptor are exchanged. The descriptors and meta-information
-are passed in struct :c:type:`v4l2_buffer` (or in struct
-:c:type:`v4l2_plane` in the multi-planar API case). The
-driver must be switched into DMABUF I/O mode by calling the
-:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>` with the desired buffer type.
-
-
-Example: Initiating streaming I/O with DMABUF file descriptors
-==============================================================
-
-.. code-block:: c
-
-    struct v4l2_requestbuffers reqbuf;
-
-    memset(&reqbuf, 0, sizeof (reqbuf));
-    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-    reqbuf.memory = V4L2_MEMORY_DMABUF;
-    reqbuf.count = 1;
-
-    if (ioctl(fd, VIDIOC_REQBUFS, &reqbuf) == -1) {
-	if (errno == EINVAL)
-	    printf("Video capturing or DMABUF streaming is not supported\\n");
-	else
-	    perror("VIDIOC_REQBUFS");
-
-	exit(EXIT_FAILURE);
-    }
-
-The buffer (plane) file descriptor is passed on the fly with the
-:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` ioctl. In case of multiplanar
-buffers, every plane can be associated with a different DMABUF
-descriptor. Although buffers are commonly cycled, applications can pass
-a different DMABUF descriptor at each :ref:`VIDIOC_QBUF <VIDIOC_QBUF>` call.
-
-Example: Queueing DMABUF using single plane API
-===============================================
-
-.. code-block:: c
-
-    int buffer_queue(int v4lfd, int index, int dmafd)
-    {
-	struct v4l2_buffer buf;
-
-	memset(&buf, 0, sizeof buf);
-	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	buf.memory = V4L2_MEMORY_DMABUF;
-	buf.index = index;
-	buf.m.fd = dmafd;
-
-	if (ioctl(v4lfd, VIDIOC_QBUF, &buf) == -1) {
-	    perror("VIDIOC_QBUF");
-	    return -1;
-	}
-
-	return 0;
-    }
-
-Example 3.6. Queueing DMABUF using multi plane API
-==================================================
-
-.. code-block:: c
-
-    int buffer_queue_mp(int v4lfd, int index, int dmafd[], int n_planes)
-    {
-	struct v4l2_buffer buf;
-	struct v4l2_plane planes[VIDEO_MAX_PLANES];
-	int i;
-
-	memset(&buf, 0, sizeof buf);
-	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
-	buf.memory = V4L2_MEMORY_DMABUF;
-	buf.index = index;
-	buf.m.planes = planes;
-	buf.length = n_planes;
-
-	memset(&planes, 0, sizeof planes);
-
-	for (i = 0; i < n_planes; ++i)
-	    buf.m.planes[i].m.fd = dmafd[i];
-
-	if (ioctl(v4lfd, VIDIOC_QBUF, &buf) == -1) {
-	    perror("VIDIOC_QBUF");
-	    return -1;
-	}
-
-	return 0;
-    }
-
-Captured or displayed buffers are dequeued with the
-:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. The driver can unlock the
-buffer at any time between the completion of the DMA and this ioctl. The
-memory is also unlocked when
-:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called,
-:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, or when the device is closed.
-
-For capturing applications it is customary to enqueue a number of empty
-buffers, to start capturing and enter the read loop. Here the
-application waits until a filled buffer can be dequeued, and re-enqueues
-the buffer when the data is no longer needed. Output applications fill
-and enqueue buffers, when enough buffers are stacked up output is
-started. In the write loop, when the application runs out of free
-buffers it must wait until an empty buffer can be dequeued and reused.
-Two methods exist to suspend execution of the application until one or
-more buffers can be dequeued. By default :ref:`VIDIOC_DQBUF
-<VIDIOC_QBUF>` blocks when no buffer is in the outgoing queue. When the
-``O_NONBLOCK`` flag was given to the :ref:`open() <func-open>` function,
-:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN``
-error code when no buffer is available. The
-:ref:`select() <func-select>` and :ref:`poll() <func-poll>`
-functions are always available.
-
-To start and stop capturing or displaying applications call the
-:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and
-:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls.
-
-.. note::
-
-   :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from
-   both queues and unlocks all buffers as a side effect. Since there is no
-   notion of doing anything "now" on a multitasking system, if an
-   application needs to synchronize with another event it should examine
-   the struct :c:type:`v4l2_buffer` ``timestamp`` of captured or
-   outputted buffers.
-
-Drivers implementing DMABUF importing I/O must support the
-:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`,
-:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_STREAMON
-<VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls,
-and the :ref:`select() <func-select>` and :ref:`poll() <func-poll>`
-functions.
diff --git a/Documentation/media/uapi/v4l/dv-timings.rst b/Documentation/media/uapi/v4l/dv-timings.rst
deleted file mode 100644
index b3c69ca559e2..000000000000
--- a/Documentation/media/uapi/v4l/dv-timings.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dv-timings:
-
-**************************
-Digital Video (DV) Timings
-**************************
-
-The video standards discussed so far have been dealing with Analog TV
-and the corresponding video timings. Today there are many more different
-hardware interfaces such as High Definition TV interfaces (HDMI), VGA,
-DVI connectors etc., that carry video signals and there is a need to
-extend the API to select the video timings for these interfaces. Since
-it is not possible to extend the :ref:`v4l2_std_id <v4l2-std-id>`
-due to the limited bits available, a new set of ioctls was added to
-set/get video timings at the input and output.
-
-These ioctls deal with the detailed digital video timings that define
-each video format. This includes parameters such as the active video
-width and height, signal polarities, frontporches, backporches, sync
-widths etc. The ``linux/v4l2-dv-timings.h`` header can be used to get
-the timings of the formats in the :ref:`cea861` and :ref:`vesadmt`
-standards.
-
-To enumerate and query the attributes of the DV timings supported by a
-device applications use the
-:ref:`VIDIOC_ENUM_DV_TIMINGS` and
-:ref:`VIDIOC_DV_TIMINGS_CAP` ioctls. To set
-DV timings for the device applications use the
-:ref:`VIDIOC_S_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>` ioctl and to get
-current DV timings they use the
-:ref:`VIDIOC_G_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>` ioctl. To detect
-the DV timings as seen by the video receiver applications use the
-:ref:`VIDIOC_QUERY_DV_TIMINGS` ioctl.
-
-Applications can make use of the :ref:`input-capabilities` and
-:ref:`output-capabilities` flags to determine whether the digital
-video ioctls can be used with the given input or output.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-camera.rst b/Documentation/media/uapi/v4l/ext-ctrls-camera.rst
deleted file mode 100644
index 51c1d5c9eb00..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-camera.rst
+++ /dev/null
@@ -1,515 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _camera-controls:
-
-************************
-Camera Control Reference
-************************
-
-The Camera class includes controls for mechanical (or equivalent
-digital) features of a device such as controllable lenses or sensors.
-
-
-.. _camera-control-id:
-
-Camera Control IDs
-==================
-
-``V4L2_CID_CAMERA_CLASS (class)``
-    The Camera class descriptor. Calling
-    :ref:`VIDIOC_QUERYCTRL` for this control will
-    return a description of this control class.
-
-.. _v4l2-exposure-auto-type:
-
-``V4L2_CID_EXPOSURE_AUTO``
-    (enum)
-
-enum v4l2_exposure_auto_type -
-    Enables automatic adjustments of the exposure time and/or iris
-    aperture. The effect of manual changes of the exposure time or iris
-    aperture while these features are enabled is undefined, drivers
-    should ignore such requests. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_EXPOSURE_AUTO``
-      - Automatic exposure time, automatic iris aperture.
-    * - ``V4L2_EXPOSURE_MANUAL``
-      - Manual exposure time, manual iris.
-    * - ``V4L2_EXPOSURE_SHUTTER_PRIORITY``
-      - Manual exposure time, auto iris.
-    * - ``V4L2_EXPOSURE_APERTURE_PRIORITY``
-      - Auto exposure time, manual iris.
-
-
-
-``V4L2_CID_EXPOSURE_ABSOLUTE (integer)``
-    Determines the exposure time of the camera sensor. The exposure time
-    is limited by the frame interval. Drivers should interpret the
-    values as 100 µs units, where the value 1 stands for 1/10000th of a
-    second, 10000 for 1 second and 100000 for 10 seconds.
-
-``V4L2_CID_EXPOSURE_AUTO_PRIORITY (boolean)``
-    When ``V4L2_CID_EXPOSURE_AUTO`` is set to ``AUTO`` or
-    ``APERTURE_PRIORITY``, this control determines if the device may
-    dynamically vary the frame rate. By default this feature is disabled
-    (0) and the frame rate must remain constant.
-
-``V4L2_CID_AUTO_EXPOSURE_BIAS (integer menu)``
-    Determines the automatic exposure compensation, it is effective only
-    when ``V4L2_CID_EXPOSURE_AUTO`` control is set to ``AUTO``,
-    ``SHUTTER_PRIORITY`` or ``APERTURE_PRIORITY``. It is expressed in
-    terms of EV, drivers should interpret the values as 0.001 EV units,
-    where the value 1000 stands for +1 EV.
-
-    Increasing the exposure compensation value is equivalent to
-    decreasing the exposure value (EV) and will increase the amount of
-    light at the image sensor. The camera performs the exposure
-    compensation by adjusting absolute exposure time and/or aperture.
-
-.. _v4l2-exposure-metering:
-
-``V4L2_CID_EXPOSURE_METERING``
-    (enum)
-
-enum v4l2_exposure_metering -
-    Determines how the camera measures the amount of light available for
-    the frame exposure. Possible values are:
-
-.. tabularcolumns:: |p{8.7cm}|p{8.8cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_EXPOSURE_METERING_AVERAGE``
-      - Use the light information coming from the entire frame and average
-	giving no weighting to any particular portion of the metered area.
-    * - ``V4L2_EXPOSURE_METERING_CENTER_WEIGHTED``
-      - Average the light information coming from the entire frame giving
-	priority to the center of the metered area.
-    * - ``V4L2_EXPOSURE_METERING_SPOT``
-      - Measure only very small area at the center of the frame.
-    * - ``V4L2_EXPOSURE_METERING_MATRIX``
-      - A multi-zone metering. The light intensity is measured in several
-	points of the frame and the results are combined. The algorithm of
-	the zones selection and their significance in calculating the
-	final value is device dependent.
-
-
-
-``V4L2_CID_PAN_RELATIVE (integer)``
-    This control turns the camera horizontally by the specified amount.
-    The unit is undefined. A positive value moves the camera to the
-    right (clockwise when viewed from above), a negative value to the
-    left. A value of zero does not cause motion. This is a write-only
-    control.
-
-``V4L2_CID_TILT_RELATIVE (integer)``
-    This control turns the camera vertically by the specified amount.
-    The unit is undefined. A positive value moves the camera up, a
-    negative value down. A value of zero does not cause motion. This is
-    a write-only control.
-
-``V4L2_CID_PAN_RESET (button)``
-    When this control is set, the camera moves horizontally to the
-    default position.
-
-``V4L2_CID_TILT_RESET (button)``
-    When this control is set, the camera moves vertically to the default
-    position.
-
-``V4L2_CID_PAN_ABSOLUTE (integer)``
-    This control turns the camera horizontally to the specified
-    position. Positive values move the camera to the right (clockwise
-    when viewed from above), negative values to the left. Drivers should
-    interpret the values as arc seconds, with valid values between -180
-    * 3600 and +180 * 3600 inclusive.
-
-``V4L2_CID_TILT_ABSOLUTE (integer)``
-    This control turns the camera vertically to the specified position.
-    Positive values move the camera up, negative values down. Drivers
-    should interpret the values as arc seconds, with valid values
-    between -180 * 3600 and +180 * 3600 inclusive.
-
-``V4L2_CID_FOCUS_ABSOLUTE (integer)``
-    This control sets the focal point of the camera to the specified
-    position. The unit is undefined. Positive values set the focus
-    closer to the camera, negative values towards infinity.
-
-``V4L2_CID_FOCUS_RELATIVE (integer)``
-    This control moves the focal point of the camera by the specified
-    amount. The unit is undefined. Positive values move the focus closer
-    to the camera, negative values towards infinity. This is a
-    write-only control.
-
-``V4L2_CID_FOCUS_AUTO (boolean)``
-    Enables continuous automatic focus adjustments. The effect of manual
-    focus adjustments while this feature is enabled is undefined,
-    drivers should ignore such requests.
-
-``V4L2_CID_AUTO_FOCUS_START (button)``
-    Starts single auto focus process. The effect of setting this control
-    when ``V4L2_CID_FOCUS_AUTO`` is set to ``TRUE`` (1) is undefined,
-    drivers should ignore such requests.
-
-``V4L2_CID_AUTO_FOCUS_STOP (button)``
-    Aborts automatic focusing started with ``V4L2_CID_AUTO_FOCUS_START``
-    control. It is effective only when the continuous autofocus is
-    disabled, that is when ``V4L2_CID_FOCUS_AUTO`` control is set to
-    ``FALSE`` (0).
-
-.. _v4l2-auto-focus-status:
-
-``V4L2_CID_AUTO_FOCUS_STATUS (bitmask)``
-    The automatic focus status. This is a read-only control.
-
-    Setting ``V4L2_LOCK_FOCUS`` lock bit of the ``V4L2_CID_3A_LOCK``
-    control may stop updates of the ``V4L2_CID_AUTO_FOCUS_STATUS``
-    control value.
-
-.. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_AUTO_FOCUS_STATUS_IDLE``
-      - Automatic focus is not active.
-    * - ``V4L2_AUTO_FOCUS_STATUS_BUSY``
-      - Automatic focusing is in progress.
-    * - ``V4L2_AUTO_FOCUS_STATUS_REACHED``
-      - Focus has been reached.
-    * - ``V4L2_AUTO_FOCUS_STATUS_FAILED``
-      - Automatic focus has failed, the driver will not transition from
-	this state until another action is performed by an application.
-
-
-
-.. _v4l2-auto-focus-range:
-
-``V4L2_CID_AUTO_FOCUS_RANGE``
-    (enum)
-
-enum v4l2_auto_focus_range -
-    Determines auto focus distance range for which lens may be adjusted.
-
-.. tabularcolumns:: |p{6.8cm}|p{10.7cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_AUTO_FOCUS_RANGE_AUTO``
-      - The camera automatically selects the focus range.
-    * - ``V4L2_AUTO_FOCUS_RANGE_NORMAL``
-      - Normal distance range, limited for best automatic focus
-	performance.
-    * - ``V4L2_AUTO_FOCUS_RANGE_MACRO``
-      - Macro (close-up) auto focus. The camera will use its minimum
-	possible distance for auto focus.
-    * - ``V4L2_AUTO_FOCUS_RANGE_INFINITY``
-      - The lens is set to focus on an object at infinite distance.
-
-
-
-``V4L2_CID_ZOOM_ABSOLUTE (integer)``
-    Specify the objective lens focal length as an absolute value. The
-    zoom unit is driver-specific and its value should be a positive
-    integer.
-
-``V4L2_CID_ZOOM_RELATIVE (integer)``
-    Specify the objective lens focal length relatively to the current
-    value. Positive values move the zoom lens group towards the
-    telephoto direction, negative values towards the wide-angle
-    direction. The zoom unit is driver-specific. This is a write-only
-    control.
-
-``V4L2_CID_ZOOM_CONTINUOUS (integer)``
-    Move the objective lens group at the specified speed until it
-    reaches physical device limits or until an explicit request to stop
-    the movement. A positive value moves the zoom lens group towards the
-    telephoto direction. A value of zero stops the zoom lens group
-    movement. A negative value moves the zoom lens group towards the
-    wide-angle direction. The zoom speed unit is driver-specific.
-
-``V4L2_CID_IRIS_ABSOLUTE (integer)``
-    This control sets the camera's aperture to the specified value. The
-    unit is undefined. Larger values open the iris wider, smaller values
-    close it.
-
-``V4L2_CID_IRIS_RELATIVE (integer)``
-    This control modifies the camera's aperture by the specified amount.
-    The unit is undefined. Positive values open the iris one step
-    further, negative values close it one step further. This is a
-    write-only control.
-
-``V4L2_CID_PRIVACY (boolean)``
-    Prevent video from being acquired by the camera. When this control
-    is set to ``TRUE`` (1), no image can be captured by the camera.
-    Common means to enforce privacy are mechanical obturation of the
-    sensor and firmware image processing, but the device is not
-    restricted to these methods. Devices that implement the privacy
-    control must support read access and may support write access.
-
-``V4L2_CID_BAND_STOP_FILTER (integer)``
-    Switch the band-stop filter of a camera sensor on or off, or specify
-    its strength. Such band-stop filters can be used, for example, to
-    filter out the fluorescent light component.
-
-.. _v4l2-auto-n-preset-white-balance:
-
-``V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE``
-    (enum)
-
-enum v4l2_auto_n_preset_white_balance -
-    Sets white balance to automatic, manual or a preset. The presets
-    determine color temperature of the light as a hint to the camera for
-    white balance adjustments resulting in most accurate color
-    representation. The following white balance presets are listed in
-    order of increasing color temperature.
-
-.. tabularcolumns:: |p{7.2 cm}|p{10.3cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_WHITE_BALANCE_MANUAL``
-      - Manual white balance.
-    * - ``V4L2_WHITE_BALANCE_AUTO``
-      - Automatic white balance adjustments.
-    * - ``V4L2_WHITE_BALANCE_INCANDESCENT``
-      - White balance setting for incandescent (tungsten) lighting. It
-	generally cools down the colors and corresponds approximately to
-	2500...3500 K color temperature range.
-    * - ``V4L2_WHITE_BALANCE_FLUORESCENT``
-      - White balance preset for fluorescent lighting. It corresponds
-	approximately to 4000...5000 K color temperature.
-    * - ``V4L2_WHITE_BALANCE_FLUORESCENT_H``
-      - With this setting the camera will compensate for fluorescent H
-	lighting.
-    * - ``V4L2_WHITE_BALANCE_HORIZON``
-      - White balance setting for horizon daylight. It corresponds
-	approximately to 5000 K color temperature.
-    * - ``V4L2_WHITE_BALANCE_DAYLIGHT``
-      - White balance preset for daylight (with clear sky). It corresponds
-	approximately to 5000...6500 K color temperature.
-    * - ``V4L2_WHITE_BALANCE_FLASH``
-      - With this setting the camera will compensate for the flash light.
-	It slightly warms up the colors and corresponds roughly to
-	5000...5500 K color temperature.
-    * - ``V4L2_WHITE_BALANCE_CLOUDY``
-      - White balance preset for moderately overcast sky. This option
-	corresponds approximately to 6500...8000 K color temperature
-	range.
-    * - ``V4L2_WHITE_BALANCE_SHADE``
-      - White balance preset for shade or heavily overcast sky. It
-	corresponds approximately to 9000...10000 K color temperature.
-
-
-
-.. _v4l2-wide-dynamic-range:
-
-``V4L2_CID_WIDE_DYNAMIC_RANGE (boolean)``
-    Enables or disables the camera's wide dynamic range feature. This
-    feature allows to obtain clear images in situations where intensity
-    of the illumination varies significantly throughout the scene, i.e.
-    there are simultaneously very dark and very bright areas. It is most
-    commonly realized in cameras by combining two subsequent frames with
-    different exposure times.  [#f1]_
-
-.. _v4l2-image-stabilization:
-
-``V4L2_CID_IMAGE_STABILIZATION (boolean)``
-    Enables or disables image stabilization.
-
-``V4L2_CID_ISO_SENSITIVITY (integer menu)``
-    Determines ISO equivalent of an image sensor indicating the sensor's
-    sensitivity to light. The numbers are expressed in arithmetic scale,
-    as per :ref:`iso12232` standard, where doubling the sensor
-    sensitivity is represented by doubling the numerical ISO value.
-    Applications should interpret the values as standard ISO values
-    multiplied by 1000, e.g. control value 800 stands for ISO 0.8.
-    Drivers will usually support only a subset of standard ISO values.
-    The effect of setting this control while the
-    ``V4L2_CID_ISO_SENSITIVITY_AUTO`` control is set to a value other
-    than ``V4L2_CID_ISO_SENSITIVITY_MANUAL`` is undefined, drivers
-    should ignore such requests.
-
-.. _v4l2-iso-sensitivity-auto-type:
-
-``V4L2_CID_ISO_SENSITIVITY_AUTO``
-    (enum)
-
-enum v4l2_iso_sensitivity_type -
-    Enables or disables automatic ISO sensitivity adjustments.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_CID_ISO_SENSITIVITY_MANUAL``
-      - Manual ISO sensitivity.
-    * - ``V4L2_CID_ISO_SENSITIVITY_AUTO``
-      - Automatic ISO sensitivity adjustments.
-
-
-
-.. _v4l2-scene-mode:
-
-``V4L2_CID_SCENE_MODE``
-    (enum)
-
-enum v4l2_scene_mode -
-    This control allows to select scene programs as the camera automatic
-    modes optimized for common shooting scenes. Within these modes the
-    camera determines best exposure, aperture, focusing, light metering,
-    white balance and equivalent sensitivity. The controls of those
-    parameters are influenced by the scene mode control. An exact
-    behavior in each mode is subject to the camera specification.
-
-    When the scene mode feature is not used, this control should be set
-    to ``V4L2_SCENE_MODE_NONE`` to make sure the other possibly related
-    controls are accessible. The following scene programs are defined:
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{5.9cm}|p{11.5cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_SCENE_MODE_NONE``
-      - The scene mode feature is disabled.
-    * - ``V4L2_SCENE_MODE_BACKLIGHT``
-      - Backlight. Compensates for dark shadows when light is coming from
-	behind a subject, also by automatically turning on the flash.
-    * - ``V4L2_SCENE_MODE_BEACH_SNOW``
-      - Beach and snow. This mode compensates for all-white or bright
-	scenes, which tend to look gray and low contrast, when camera's
-	automatic exposure is based on an average scene brightness. To
-	compensate, this mode automatically slightly overexposes the
-	frames. The white balance may also be adjusted to compensate for
-	the fact that reflected snow looks bluish rather than white.
-    * - ``V4L2_SCENE_MODE_CANDLELIGHT``
-      - Candle light. The camera generally raises the ISO sensitivity and
-	lowers the shutter speed. This mode compensates for relatively
-	close subject in the scene. The flash is disabled in order to
-	preserve the ambiance of the light.
-    * - ``V4L2_SCENE_MODE_DAWN_DUSK``
-      - Dawn and dusk. Preserves the colors seen in low natural light
-	before dusk and after down. The camera may turn off the flash, and
-	automatically focus at infinity. It will usually boost saturation
-	and lower the shutter speed.
-    * - ``V4L2_SCENE_MODE_FALL_COLORS``
-      - Fall colors. Increases saturation and adjusts white balance for
-	color enhancement. Pictures of autumn leaves get saturated reds
-	and yellows.
-    * - ``V4L2_SCENE_MODE_FIREWORKS``
-      - Fireworks. Long exposure times are used to capture the expanding
-	burst of light from a firework. The camera may invoke image
-	stabilization.
-    * - ``V4L2_SCENE_MODE_LANDSCAPE``
-      - Landscape. The camera may choose a small aperture to provide deep
-	depth of field and long exposure duration to help capture detail
-	in dim light conditions. The focus is fixed at infinity. Suitable
-	for distant and wide scenery.
-    * - ``V4L2_SCENE_MODE_NIGHT``
-      - Night, also known as Night Landscape. Designed for low light
-	conditions, it preserves detail in the dark areas without blowing
-	out bright objects. The camera generally sets itself to a
-	medium-to-high ISO sensitivity, with a relatively long exposure
-	time, and turns flash off. As such, there will be increased image
-	noise and the possibility of blurred image.
-    * - ``V4L2_SCENE_MODE_PARTY_INDOOR``
-      - Party and indoor. Designed to capture indoor scenes that are lit
-	by indoor background lighting as well as the flash. The camera
-	usually increases ISO sensitivity, and adjusts exposure for the
-	low light conditions.
-    * - ``V4L2_SCENE_MODE_PORTRAIT``
-      - Portrait. The camera adjusts the aperture so that the depth of
-	field is reduced, which helps to isolate the subject against a
-	smooth background. Most cameras recognize the presence of faces in
-	the scene and focus on them. The color hue is adjusted to enhance
-	skin tones. The intensity of the flash is often reduced.
-    * - ``V4L2_SCENE_MODE_SPORTS``
-      - Sports. Significantly increases ISO and uses a fast shutter speed
-	to freeze motion of rapidly-moving subjects. Increased image noise
-	may be seen in this mode.
-    * - ``V4L2_SCENE_MODE_SUNSET``
-      - Sunset. Preserves deep hues seen in sunsets and sunrises. It bumps
-	up the saturation.
-    * - ``V4L2_SCENE_MODE_TEXT``
-      - Text. It applies extra contrast and sharpness, it is typically a
-	black-and-white mode optimized for readability. Automatic focus
-	may be switched to close-up mode and this setting may also involve
-	some lens-distortion correction.
-
-.. raw:: latex
-
-    \normalsize
-
-
-``V4L2_CID_3A_LOCK (bitmask)``
-    This control locks or unlocks the automatic focus, exposure and
-    white balance. The automatic adjustments can be paused independently
-    by setting the corresponding lock bit to 1. The camera then retains
-    the settings until the lock bit is cleared. The following lock bits
-    are defined:
-
-    When a given algorithm is not enabled, drivers should ignore
-    requests to lock it and should return no error. An example might be
-    an application setting bit ``V4L2_LOCK_WHITE_BALANCE`` when the
-    ``V4L2_CID_AUTO_WHITE_BALANCE`` control is set to ``FALSE``. The
-    value of this control may be changed by exposure, white balance or
-    focus controls.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_LOCK_EXPOSURE``
-      - Automatic exposure adjustments lock.
-    * - ``V4L2_LOCK_WHITE_BALANCE``
-      - Automatic white balance adjustments lock.
-    * - ``V4L2_LOCK_FOCUS``
-      - Automatic focus lock.
-
-
-
-``V4L2_CID_PAN_SPEED (integer)``
-    This control turns the camera horizontally at the specific speed.
-    The unit is undefined. A positive value moves the camera to the
-    right (clockwise when viewed from above), a negative value to the
-    left. A value of zero stops the motion if one is in progress and has
-    no effect otherwise.
-
-``V4L2_CID_TILT_SPEED (integer)``
-    This control turns the camera vertically at the specified speed. The
-    unit is undefined. A positive value moves the camera up, a negative
-    value down. A value of zero stops the motion if one is in progress
-    and has no effect otherwise.
-
-.. [#f1]
-   This control may be changed to a menu control in the future, if more
-   options are required.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
deleted file mode 100644
index d4fc5f25aa14..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
+++ /dev/null
@@ -1,4264 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _mpeg-controls:
-
-***********************
-Codec Control Reference
-***********************
-
-Below all controls within the Codec control class are described. First
-the generic controls, then controls specific for certain hardware.
-
-.. note::
-
-   These controls are applicable to all codecs and not just MPEG. The
-   defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG as the controls
-   were originally made for MPEG codecs and later extended to cover all
-   encoding formats.
-
-
-Generic Codec Controls
-======================
-
-
-.. _mpeg-control-id:
-
-Codec Control IDs
------------------
-
-``V4L2_CID_MPEG_CLASS (class)``
-    The Codec class descriptor. Calling
-    :ref:`VIDIOC_QUERYCTRL` for this control will
-    return a description of this control class. This description can be
-    used as the caption of a Tab page in a GUI, for example.
-
-.. _v4l2-mpeg-stream-type:
-
-``V4L2_CID_MPEG_STREAM_TYPE``
-    (enum)
-
-enum v4l2_mpeg_stream_type -
-    The MPEG-1, -2 or -4 output stream type. One cannot assume anything
-    here. Each hardware MPEG encoder tends to support different subsets
-    of the available MPEG stream types. This control is specific to
-    multiplexed MPEG streams. The currently defined stream types are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_PS``
-      - MPEG-2 program stream
-    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_TS``
-      - MPEG-2 transport stream
-    * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_SS``
-      - MPEG-1 system stream
-    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_DVD``
-      - MPEG-2 DVD-compatible stream
-    * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_VCD``
-      - MPEG-1 VCD-compatible stream
-    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD``
-      - MPEG-2 SVCD-compatible stream
-
-
-
-``V4L2_CID_MPEG_STREAM_PID_PMT (integer)``
-    Program Map Table Packet ID for the MPEG transport stream (default
-    16)
-
-``V4L2_CID_MPEG_STREAM_PID_AUDIO (integer)``
-    Audio Packet ID for the MPEG transport stream (default 256)
-
-``V4L2_CID_MPEG_STREAM_PID_VIDEO (integer)``
-    Video Packet ID for the MPEG transport stream (default 260)
-
-``V4L2_CID_MPEG_STREAM_PID_PCR (integer)``
-    Packet ID for the MPEG transport stream carrying PCR fields (default
-    259)
-
-``V4L2_CID_MPEG_STREAM_PES_ID_AUDIO (integer)``
-    Audio ID for MPEG PES
-
-``V4L2_CID_MPEG_STREAM_PES_ID_VIDEO (integer)``
-    Video ID for MPEG PES
-
-.. _v4l2-mpeg-stream-vbi-fmt:
-
-``V4L2_CID_MPEG_STREAM_VBI_FMT``
-    (enum)
-
-enum v4l2_mpeg_stream_vbi_fmt -
-    Some cards can embed VBI data (e. g. Closed Caption, Teletext) into
-    the MPEG stream. This control selects whether VBI data should be
-    embedded, and if so, what embedding method should be used. The list
-    of possible VBI formats depends on the driver. The currently defined
-    VBI format types are:
-
-
-
-.. tabularcolumns:: |p{6.6 cm}|p{10.9cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_STREAM_VBI_FMT_NONE``
-      - No VBI in the MPEG stream
-    * - ``V4L2_MPEG_STREAM_VBI_FMT_IVTV``
-      - VBI in private packets, IVTV format (documented in the kernel
-	sources in the file
-	``Documentation/media/v4l-drivers/cx2341x.rst``)
-
-
-
-.. _v4l2-mpeg-audio-sampling-freq:
-
-``V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ``
-    (enum)
-
-enum v4l2_mpeg_audio_sampling_freq -
-    MPEG Audio sampling frequency. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100``
-      - 44.1 kHz
-    * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000``
-      - 48 kHz
-    * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000``
-      - 32 kHz
-
-
-
-.. _v4l2-mpeg-audio-encoding:
-
-``V4L2_CID_MPEG_AUDIO_ENCODING``
-    (enum)
-
-enum v4l2_mpeg_audio_encoding -
-    MPEG Audio encoding. This control is specific to multiplexed MPEG
-    streams. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_1``
-      - MPEG-1/2 Layer I encoding
-    * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_2``
-      - MPEG-1/2 Layer II encoding
-    * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_3``
-      - MPEG-1/2 Layer III encoding
-    * - ``V4L2_MPEG_AUDIO_ENCODING_AAC``
-      - MPEG-2/4 AAC (Advanced Audio Coding)
-    * - ``V4L2_MPEG_AUDIO_ENCODING_AC3``
-      - AC-3 aka ATSC A/52 encoding
-
-
-
-.. _v4l2-mpeg-audio-l1-bitrate:
-
-``V4L2_CID_MPEG_AUDIO_L1_BITRATE``
-    (enum)
-
-enum v4l2_mpeg_audio_l1_bitrate -
-    MPEG-1/2 Layer I bitrate. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_32K``
-      - 32 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_64K``
-      - 64 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_96K``
-      - 96 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_128K``
-      - 128 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_160K``
-      - 160 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_192K``
-      - 192 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_224K``
-      - 224 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_256K``
-      - 256 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_288K``
-      - 288 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_320K``
-      - 320 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_352K``
-      - 352 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_384K``
-      - 384 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_416K``
-      - 416 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_448K``
-      - 448 kbit/s
-
-
-
-.. _v4l2-mpeg-audio-l2-bitrate:
-
-``V4L2_CID_MPEG_AUDIO_L2_BITRATE``
-    (enum)
-
-enum v4l2_mpeg_audio_l2_bitrate -
-    MPEG-1/2 Layer II bitrate. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_32K``
-      - 32 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_48K``
-      - 48 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_56K``
-      - 56 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_64K``
-      - 64 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_80K``
-      - 80 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_96K``
-      - 96 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_112K``
-      - 112 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_128K``
-      - 128 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_160K``
-      - 160 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_192K``
-      - 192 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_224K``
-      - 224 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_256K``
-      - 256 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_320K``
-      - 320 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_384K``
-      - 384 kbit/s
-
-
-
-.. _v4l2-mpeg-audio-l3-bitrate:
-
-``V4L2_CID_MPEG_AUDIO_L3_BITRATE``
-    (enum)
-
-enum v4l2_mpeg_audio_l3_bitrate -
-    MPEG-1/2 Layer III bitrate. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_32K``
-      - 32 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_40K``
-      - 40 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_48K``
-      - 48 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_56K``
-      - 56 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_64K``
-      - 64 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_80K``
-      - 80 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_96K``
-      - 96 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_112K``
-      - 112 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_128K``
-      - 128 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_160K``
-      - 160 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_192K``
-      - 192 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_224K``
-      - 224 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_256K``
-      - 256 kbit/s
-    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_320K``
-      - 320 kbit/s
-
-
-
-``V4L2_CID_MPEG_AUDIO_AAC_BITRATE (integer)``
-    AAC bitrate in bits per second.
-
-.. _v4l2-mpeg-audio-ac3-bitrate:
-
-``V4L2_CID_MPEG_AUDIO_AC3_BITRATE``
-    (enum)
-
-enum v4l2_mpeg_audio_ac3_bitrate -
-    AC-3 bitrate. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_32K``
-      - 32 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_40K``
-      - 40 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_48K``
-      - 48 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_56K``
-      - 56 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_64K``
-      - 64 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_80K``
-      - 80 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_96K``
-      - 96 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_112K``
-      - 112 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_128K``
-      - 128 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_160K``
-      - 160 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_192K``
-      - 192 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_224K``
-      - 224 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_256K``
-      - 256 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_320K``
-      - 320 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_384K``
-      - 384 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_448K``
-      - 448 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_512K``
-      - 512 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_576K``
-      - 576 kbit/s
-    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_640K``
-      - 640 kbit/s
-
-
-
-.. _v4l2-mpeg-audio-mode:
-
-``V4L2_CID_MPEG_AUDIO_MODE``
-    (enum)
-
-enum v4l2_mpeg_audio_mode -
-    MPEG Audio mode. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_MODE_STEREO``
-      - Stereo
-    * - ``V4L2_MPEG_AUDIO_MODE_JOINT_STEREO``
-      - Joint Stereo
-    * - ``V4L2_MPEG_AUDIO_MODE_DUAL``
-      - Bilingual
-    * - ``V4L2_MPEG_AUDIO_MODE_MONO``
-      - Mono
-
-
-
-.. _v4l2-mpeg-audio-mode-extension:
-
-``V4L2_CID_MPEG_AUDIO_MODE_EXTENSION``
-    (enum)
-
-enum v4l2_mpeg_audio_mode_extension -
-    Joint Stereo audio mode extension. In Layer I and II they indicate
-    which subbands are in intensity stereo. All other subbands are coded
-    in stereo. Layer III is not (yet) supported. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4``
-      - Subbands 4-31 in intensity stereo
-    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8``
-      - Subbands 8-31 in intensity stereo
-    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12``
-      - Subbands 12-31 in intensity stereo
-    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16``
-      - Subbands 16-31 in intensity stereo
-
-
-
-.. _v4l2-mpeg-audio-emphasis:
-
-``V4L2_CID_MPEG_AUDIO_EMPHASIS``
-    (enum)
-
-enum v4l2_mpeg_audio_emphasis -
-    Audio Emphasis. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_EMPHASIS_NONE``
-      - None
-    * - ``V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS``
-      - 50/15 microsecond emphasis
-    * - ``V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17``
-      - CCITT J.17
-
-
-
-.. _v4l2-mpeg-audio-crc:
-
-``V4L2_CID_MPEG_AUDIO_CRC``
-    (enum)
-
-enum v4l2_mpeg_audio_crc -
-    CRC method. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_CRC_NONE``
-      - None
-    * - ``V4L2_MPEG_AUDIO_CRC_CRC16``
-      - 16 bit parity check
-
-
-
-``V4L2_CID_MPEG_AUDIO_MUTE (boolean)``
-    Mutes the audio when capturing. This is not done by muting audio
-    hardware, which can still produce a slight hiss, but in the encoder
-    itself, guaranteeing a fixed and reproducible audio bitstream. 0 =
-    unmuted, 1 = muted.
-
-.. _v4l2-mpeg-audio-dec-playback:
-
-``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK``
-    (enum)
-
-enum v4l2_mpeg_audio_dec_playback -
-    Determines how monolingual audio should be played back. Possible
-    values are:
-
-
-
-.. tabularcolumns:: |p{9.8cm}|p{7.7cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO``
-      - Automatically determines the best playback mode.
-    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO``
-      - Stereo playback.
-    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT``
-      - Left channel playback.
-    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT``
-      - Right channel playback.
-    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO``
-      - Mono playback.
-    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO``
-      - Stereo playback with swapped left and right channels.
-
-
-
-.. _v4l2-mpeg-audio-dec-multilingual-playback:
-
-``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK``
-    (enum)
-
-enum v4l2_mpeg_audio_dec_playback -
-    Determines how multilingual audio should be played back.
-
-.. _v4l2-mpeg-video-encoding:
-
-``V4L2_CID_MPEG_VIDEO_ENCODING``
-    (enum)
-
-enum v4l2_mpeg_video_encoding -
-    MPEG Video encoding method. This control is specific to multiplexed
-    MPEG streams. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_1``
-      - MPEG-1 Video encoding
-    * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_2``
-      - MPEG-2 Video encoding
-    * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC``
-      - MPEG-4 AVC (H.264) Video encoding
-
-
-
-.. _v4l2-mpeg-video-aspect:
-
-``V4L2_CID_MPEG_VIDEO_ASPECT``
-    (enum)
-
-enum v4l2_mpeg_video_aspect -
-    Video aspect. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_ASPECT_1x1``
-    * - ``V4L2_MPEG_VIDEO_ASPECT_4x3``
-    * - ``V4L2_MPEG_VIDEO_ASPECT_16x9``
-    * - ``V4L2_MPEG_VIDEO_ASPECT_221x100``
-
-
-
-``V4L2_CID_MPEG_VIDEO_B_FRAMES (integer)``
-    Number of B-Frames (default 2)
-
-``V4L2_CID_MPEG_VIDEO_GOP_SIZE (integer)``
-    GOP size (default 12)
-
-``V4L2_CID_MPEG_VIDEO_GOP_CLOSURE (boolean)``
-    GOP closure (default 1)
-
-``V4L2_CID_MPEG_VIDEO_PULLDOWN (boolean)``
-    Enable 3:2 pulldown (default 0)
-
-.. _v4l2-mpeg-video-bitrate-mode:
-
-``V4L2_CID_MPEG_VIDEO_BITRATE_MODE``
-    (enum)
-
-enum v4l2_mpeg_video_bitrate_mode -
-    Video bitrate mode. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_VBR``
-      - Variable bitrate
-    * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CBR``
-      - Constant bitrate
-
-
-
-``V4L2_CID_MPEG_VIDEO_BITRATE (integer)``
-    Video bitrate in bits per second.
-
-``V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (integer)``
-    Peak video bitrate in bits per second. Must be larger or equal to
-    the average video bitrate. It is ignored if the video bitrate mode
-    is set to constant bitrate.
-
-``V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (integer)``
-    For every captured frame, skip this many subsequent frames (default
-    0).
-
-``V4L2_CID_MPEG_VIDEO_MUTE (boolean)``
-    "Mutes" the video to a fixed color when capturing. This is useful
-    for testing, to produce a fixed video bitstream. 0 = unmuted, 1 =
-    muted.
-
-``V4L2_CID_MPEG_VIDEO_MUTE_YUV (integer)``
-    Sets the "mute" color of the video. The supplied 32-bit integer is
-    interpreted as follows (bit 0 = least significant bit):
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - Bit 0:7
-      - V chrominance information
-    * - Bit 8:15
-      - U chrominance information
-    * - Bit 16:23
-      - Y luminance information
-    * - Bit 24:31
-      - Must be zero.
-
-
-
-.. _v4l2-mpeg-video-dec-pts:
-
-``V4L2_CID_MPEG_VIDEO_DEC_PTS (integer64)``
-    This read-only control returns the 33-bit video Presentation Time
-    Stamp as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1 of the
-    currently displayed frame. This is the same PTS as is used in
-    :ref:`VIDIOC_DECODER_CMD`.
-
-.. _v4l2-mpeg-video-dec-frame:
-
-``V4L2_CID_MPEG_VIDEO_DEC_FRAME (integer64)``
-    This read-only control returns the frame counter of the frame that
-    is currently displayed (decoded). This value is reset to 0 whenever
-    the decoder is started.
-
-``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)``
-    If enabled the decoder expects to receive a single slice per buffer,
-    otherwise the decoder expects a single frame in per buffer.
-    Applicable to the decoder, all codecs.
-
-``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)``
-    Enable writing sample aspect ratio in the Video Usability
-    Information. Applicable to the H264 encoder.
-
-.. _v4l2-mpeg-video-h264-vui-sar-idc:
-
-``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC``
-    (enum)
-
-enum v4l2_mpeg_video_h264_vui_sar_idc -
-    VUI sample aspect ratio indicator for H.264 encoding. The value is
-    defined in the table E-1 in the standard. Applicable to the H264
-    encoder.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED``
-      - Unspecified
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1``
-      - 1x1
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11``
-      - 12x11
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11``
-      - 10x11
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11``
-      - 16x11
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33``
-      - 40x33
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11``
-      - 24x11
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11``
-      - 20x11
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11``
-      - 32x11
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33``
-      - 80x33
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11``
-      - 18x11
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11``
-      - 15x11
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33``
-      - 64x33
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99``
-      - 160x99
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3``
-      - 4x3
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2``
-      - 3x2
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1``
-      - 2x1
-    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED``
-      - Extended SAR
-
-
-
-``V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (integer)``
-    Extended sample aspect ratio width for H.264 VUI encoding.
-    Applicable to the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (integer)``
-    Extended sample aspect ratio height for H.264 VUI encoding.
-    Applicable to the H264 encoder.
-
-.. _v4l2-mpeg-video-h264-level:
-
-``V4L2_CID_MPEG_VIDEO_H264_LEVEL``
-    (enum)
-
-enum v4l2_mpeg_video_h264_level -
-    The level information for the H264 video elementary stream.
-    Applicable to the H264 encoder. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_0``
-      - Level 1.0
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1B``
-      - Level 1B
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_1``
-      - Level 1.1
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_2``
-      - Level 1.2
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_3``
-      - Level 1.3
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_0``
-      - Level 2.0
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_1``
-      - Level 2.1
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_2``
-      - Level 2.2
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_0``
-      - Level 3.0
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_1``
-      - Level 3.1
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_2``
-      - Level 3.2
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_0``
-      - Level 4.0
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_1``
-      - Level 4.1
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_2``
-      - Level 4.2
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_0``
-      - Level 5.0
-    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_1``
-      - Level 5.1
-
-
-
-.. _v4l2-mpeg-video-mpeg2-level:
-
-``V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL``
-    (enum)
-
-enum v4l2_mpeg_video_mpeg2_level -
-    The level information for the MPEG2 elementary stream. Applicable to
-    MPEG2 codecs. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_LOW``
-      - Low Level (LL)
-    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_MAIN``
-      - Main Level (ML)
-    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH_1440``
-      - High-1440 Level (H-14)
-    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH``
-      - High Level (HL)
-
-
-
-.. _v4l2-mpeg-video-mpeg4-level:
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL``
-    (enum)
-
-enum v4l2_mpeg_video_mpeg4_level -
-    The level information for the MPEG4 elementary stream. Applicable to
-    the MPEG4 encoder. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0``
-      - Level 0
-    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B``
-      - Level 0b
-    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_1``
-      - Level 1
-    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_2``
-      - Level 2
-    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3``
-      - Level 3
-    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B``
-      - Level 3b
-    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_4``
-      - Level 4
-    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_5``
-      - Level 5
-
-
-
-.. _v4l2-mpeg-video-h264-profile:
-
-``V4L2_CID_MPEG_VIDEO_H264_PROFILE``
-    (enum)
-
-enum v4l2_mpeg_video_h264_profile -
-    The profile information for H264. Applicable to the H264 encoder.
-    Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE``
-      - Baseline profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE``
-      - Constrained Baseline profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MAIN``
-      - Main profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED``
-      - Extended profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH``
-      - High profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10``
-      - High 10 profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422``
-      - High 422 profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE``
-      - High 444 Predictive profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA``
-      - High 10 Intra profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA``
-      - High 422 Intra profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA``
-      - High 444 Intra profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA``
-      - CAVLC 444 Intra profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE``
-      - Scalable Baseline profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH``
-      - Scalable High profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA``
-      - Scalable High Intra profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH``
-      - Stereo High profile
-    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH``
-      - Multiview High profile
-
-
-
-.. _v4l2-mpeg-video-mpeg2-profile:
-
-``V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE``
-    (enum)
-
-enum v4l2_mpeg_video_mpeg2_profile -
-    The profile information for MPEG2. Applicable to MPEG2 codecs.
-    Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SIMPLE``
-      - Simple profile (SP)
-    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MAIN``
-      - Main profile (MP)
-    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SNR_SCALABLE``
-      - SNR Scalable profile (SNR)
-    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SPATIALLY_SCALABLE``
-      - Spatially Scalable profile (Spt)
-    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_HIGH``
-      - High profile (HP)
-    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MULTIVIEW``
-      - Multi-view profile (MVP)
-
-
-
-.. _v4l2-mpeg-video-mpeg4-profile:
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE``
-    (enum)
-
-enum v4l2_mpeg_video_mpeg4_profile -
-    The profile information for MPEG4. Applicable to the MPEG4 encoder.
-    Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE``
-      - Simple profile
-    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE``
-      - Advanced Simple profile
-    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE``
-      - Core profile
-    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE``
-      - Simple Scalable profile
-    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY``
-      -
-
-
-
-``V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (integer)``
-    The maximum number of reference pictures used for encoding.
-    Applicable to the encoder.
-
-.. _v4l2-mpeg-video-multi-slice-mode:
-
-``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE``
-    (enum)
-
-enum v4l2_mpeg_video_multi_slice_mode -
-    Determines how the encoder should handle division of frame into
-    slices. Applicable to the encoder. Possible values are:
-
-
-
-.. tabularcolumns:: |p{9.6cm}|p{7.9cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE``
-      - Single slice per frame.
-    * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB``
-      - Multiple slices with set maximum number of macroblocks per slice.
-    * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES``
-      - Multiple slice with set maximum size in bytes per slice.
-
-
-
-``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB (integer)``
-    The maximum number of macroblocks in a slice. Used when
-    ``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` is set to
-    ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB``. Applicable to the
-    encoder.
-
-``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES (integer)``
-    The maximum size of a slice in bytes. Used when
-    ``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` is set to
-    ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES``. Applicable to the
-    encoder.
-
-.. _v4l2-mpeg-video-h264-loop-filter-mode:
-
-``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE``
-    (enum)
-
-enum v4l2_mpeg_video_h264_loop_filter_mode -
-    Loop filter mode for H264 encoder. Possible values are:
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{13.6cm}|p{3.9cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED``
-      - Loop filter is enabled.
-    * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED``
-      - Loop filter is disabled.
-    * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY``
-      - Loop filter is disabled at the slice boundary.
-
-.. raw:: latex
-
-    \normalsize
-
-
-``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (integer)``
-    Loop filter alpha coefficient, defined in the H264 standard.
-    This value corresponds to the slice_alpha_c0_offset_div2 slice header
-    field, and should be in the range of -6 to +6, inclusive. The actual alpha
-    offset FilterOffsetA is twice this value.
-    Applicable to the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (integer)``
-    Loop filter beta coefficient, defined in the H264 standard.
-    This corresponds to the slice_beta_offset_div2 slice header field, and
-    should be in the range of -6 to +6, inclusive. The actual beta offset
-    FilterOffsetB is twice this value.
-    Applicable to the H264 encoder.
-
-.. _v4l2-mpeg-video-h264-entropy-mode:
-
-``V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE``
-    (enum)
-
-enum v4l2_mpeg_video_h264_entropy_mode -
-    Entropy coding mode for H264 - CABAC/CAVALC. Applicable to the H264
-    encoder. Possible values are:
-
-
-.. tabularcolumns:: |p{9.0cm}|p{8.5cm}|
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC``
-      - Use CAVLC entropy coding.
-    * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC``
-      - Use CABAC entropy coding.
-
-
-
-``V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM (boolean)``
-    Enable 8X8 transform for H264. Applicable to the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_CONSTRAINED_INTRA_PREDICTION (boolean)``
-    Enable constrained intra prediction for H264. Applicable to the H264
-    encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_CHROMA_QP_INDEX_OFFSET (integer)``
-    Specify the offset that should be added to the luma quantization
-    parameter to determine the chroma quantization parameter. Applicable
-    to the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB (integer)``
-    Cyclic intra macroblock refresh. This is the number of continuous
-    macroblocks refreshed every frame. Each frame a successive set of
-    macroblocks is refreshed until the cycle completes and starts from
-    the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
-
-``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)``
-    Frame level rate control enable. If this control is disabled then
-    the quantization parameter for each frame type is constant and set
-    with appropriate controls (e.g.
-    ``V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP``). If frame rate control is
-    enabled then quantization parameter is adjusted to meet the chosen
-    bitrate. Minimum and maximum value for the quantization parameter
-    can be set with appropriate controls (e.g.
-    ``V4L2_CID_MPEG_VIDEO_H263_MIN_QP``). Applicable to encoders.
-
-``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE (boolean)``
-    Macroblock level rate control enable. Applicable to the MPEG4 and
-    H264 encoders.
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (boolean)``
-    Quarter pixel motion estimation for MPEG4. Applicable to the MPEG4
-    encoder.
-
-``V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (integer)``
-    Quantization parameter for an I frame for H263. Valid range: from 1
-    to 31.
-
-``V4L2_CID_MPEG_VIDEO_H263_MIN_QP (integer)``
-    Minimum quantization parameter for H263. Valid range: from 1 to 31.
-
-``V4L2_CID_MPEG_VIDEO_H263_MAX_QP (integer)``
-    Maximum quantization parameter for H263. Valid range: from 1 to 31.
-
-``V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (integer)``
-    Quantization parameter for an P frame for H263. Valid range: from 1
-    to 31.
-
-``V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (integer)``
-    Quantization parameter for an B frame for H263. Valid range: from 1
-    to 31.
-
-``V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP (integer)``
-    Quantization parameter for an I frame for H264. Valid range: from 0
-    to 51.
-
-``V4L2_CID_MPEG_VIDEO_H264_MIN_QP (integer)``
-    Minimum quantization parameter for H264. Valid range: from 0 to 51.
-
-``V4L2_CID_MPEG_VIDEO_H264_MAX_QP (integer)``
-    Maximum quantization parameter for H264. Valid range: from 0 to 51.
-
-``V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP (integer)``
-    Quantization parameter for an P frame for H264. Valid range: from 0
-    to 51.
-
-``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP (integer)``
-    Quantization parameter for an B frame for H264. Valid range: from 0
-    to 51.
-
-``V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP (integer)``
-    Minimum quantization parameter for the H264 I frame to limit I frame
-    quality to a range. Valid range: from 0 to 51. If
-    V4L2_CID_MPEG_VIDEO_H264_MIN_QP is also set, the quantization parameter
-    should be chosen to meet both requirements.
-
-``V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP (integer)``
-    Maximum quantization parameter for the H264 I frame to limit I frame
-    quality to a range. Valid range: from 0 to 51. If
-    V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter
-    should be chosen to meet both requirements.
-
-``V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP (integer)``
-    Minimum quantization parameter for the H264 P frame to limit P frame
-    quality to a range. Valid range: from 0 to 51. If
-    V4L2_CID_MPEG_VIDEO_H264_MIN_QP is also set, the quantization parameter
-    should be chosen to meet both requirements.
-
-``V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP (integer)``
-    Maximum quantization parameter for the H264 P frame to limit P frame
-    quality to a range. Valid range: from 0 to 51. If
-    V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter
-    should be chosen to meet both requirements.
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (integer)``
-    Quantization parameter for an I frame for MPEG4. Valid range: from 1
-    to 31.
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP (integer)``
-    Minimum quantization parameter for MPEG4. Valid range: from 1 to 31.
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP (integer)``
-    Maximum quantization parameter for MPEG4. Valid range: from 1 to 31.
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (integer)``
-    Quantization parameter for an P frame for MPEG4. Valid range: from 1
-    to 31.
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (integer)``
-    Quantization parameter for an B frame for MPEG4. Valid range: from 1
-    to 31.
-
-``V4L2_CID_MPEG_VIDEO_VBV_SIZE (integer)``
-    The Video Buffer Verifier size in kilobytes, it is used as a
-    limitation of frame skip. The VBV is defined in the standard as a
-    mean to verify that the produced stream will be successfully
-    decoded. The standard describes it as "Part of a hypothetical
-    decoder that is conceptually connected to the output of the encoder.
-    Its purpose is to provide a constraint on the variability of the
-    data rate that an encoder or editing process may produce.".
-    Applicable to the MPEG1, MPEG2, MPEG4 encoders.
-
-.. _v4l2-mpeg-video-vbv-delay:
-
-``V4L2_CID_MPEG_VIDEO_VBV_DELAY (integer)``
-    Sets the initial delay in milliseconds for VBV buffer control.
-
-.. _v4l2-mpeg-video-hor-search-range:
-
-``V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE (integer)``
-    Horizontal search range defines maximum horizontal search area in
-    pixels to search and match for the present Macroblock (MB) in the
-    reference picture. This V4L2 control macro is used to set horizontal
-    search range for motion estimation module in video encoder.
-
-.. _v4l2-mpeg-video-vert-search-range:
-
-``V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (integer)``
-    Vertical search range defines maximum vertical search area in pixels
-    to search and match for the present Macroblock (MB) in the reference
-    picture. This V4L2 control macro is used to set vertical search
-    range for motion estimation module in video encoder.
-
-.. _v4l2-mpeg-video-force-key-frame:
-
-``V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (button)``
-    Force a key frame for the next queued buffer. Applicable to
-    encoders. This is a general, codec-agnostic keyframe control.
-
-``V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (integer)``
-    The Coded Picture Buffer size in kilobytes, it is used as a
-    limitation of frame skip. The CPB is defined in the H264 standard as
-    a mean to verify that the produced stream will be successfully
-    decoded. Applicable to the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_I_PERIOD (integer)``
-    Period between I-frames in the open GOP for H264. In case of an open
-    GOP this is the period between two I-frames. The period between IDR
-    (Instantaneous Decoding Refresh) frames is taken from the GOP_SIZE
-    control. An IDR frame, which stands for Instantaneous Decoding
-    Refresh is an I-frame after which no prior frames are referenced.
-    This means that a stream can be restarted from an IDR frame without
-    the need to store or decode any previous frames. Applicable to the
-    H264 encoder.
-
-.. _v4l2-mpeg-video-header-mode:
-
-``V4L2_CID_MPEG_VIDEO_HEADER_MODE``
-    (enum)
-
-enum v4l2_mpeg_video_header_mode -
-    Determines whether the header is returned as the first buffer or is
-    it returned together with the first frame. Applicable to encoders.
-    Possible values are:
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{10.3cm}|p{7.2cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE``
-      - The stream header is returned separately in the first buffer.
-    * - ``V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME``
-      - The stream header is returned together with the first encoded
-	frame.
-
-.. raw:: latex
-
-    \normalsize
-
-
-``V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER (boolean)``
-    Repeat the video sequence headers. Repeating these headers makes
-    random access to the video stream easier. Applicable to the MPEG1, 2
-    and 4 encoder.
-
-``V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER (boolean)``
-    Enabled the deblocking post processing filter for MPEG4 decoder.
-    Applicable to the MPEG4 decoder.
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_RES (integer)``
-    vop_time_increment_resolution value for MPEG4. Applicable to the
-    MPEG4 encoder.
-
-``V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_INC (integer)``
-    vop_time_increment value for MPEG4. Applicable to the MPEG4
-    encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING (boolean)``
-    Enable generation of frame packing supplemental enhancement
-    information in the encoded bitstream. The frame packing SEI message
-    contains the arrangement of L and R planes for 3D viewing.
-    Applicable to the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0 (boolean)``
-    Sets current frame as frame0 in frame packing SEI. Applicable to the
-    H264 encoder.
-
-.. _v4l2-mpeg-video-h264-sei-fp-arrangement-type:
-
-``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE``
-    (enum)
-
-enum v4l2_mpeg_video_h264_sei_fp_arrangement_type -
-    Frame packing arrangement type for H264 SEI. Applicable to the H264
-    encoder. Possible values are:
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{12cm}|p{5.5cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHEKERBOARD``
-      - Pixels are alternatively from L and R.
-    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN``
-      - L and R are interlaced by column.
-    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW``
-      - L and R are interlaced by row.
-    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE``
-      - L is on the left, R on the right.
-    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM``
-      - L is on top, R on bottom.
-    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL``
-      - One view per frame.
-
-.. raw:: latex
-
-    \normalsize
-
-
-
-``V4L2_CID_MPEG_VIDEO_H264_FMO (boolean)``
-    Enables flexible macroblock ordering in the encoded bitstream. It is
-    a technique used for restructuring the ordering of macroblocks in
-    pictures. Applicable to the H264 encoder.
-
-.. _v4l2-mpeg-video-h264-fmo-map-type:
-
-``V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE``
-   (enum)
-
-enum v4l2_mpeg_video_h264_fmo_map_type -
-    When using FMO, the map type divides the image in different scan
-    patterns of macroblocks. Applicable to the H264 encoder. Possible
-    values are:
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{12.5cm}|p{5.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES``
-      - Slices are interleaved one after other with macroblocks in run
-	length order.
-    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES``
-      - Scatters the macroblocks based on a mathematical function known to
-	both encoder and decoder.
-    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER``
-      - Macroblocks arranged in rectangular areas or regions of interest.
-    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT``
-      - Slice groups grow in a cyclic way from centre to outwards.
-    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN``
-      - Slice groups grow in raster scan pattern from left to right.
-    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN``
-      - Slice groups grow in wipe scan pattern from top to bottom.
-    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT``
-      - User defined map type.
-
-.. raw:: latex
-
-    \normalsize
-
-
-
-``V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP (integer)``
-    Number of slice groups in FMO. Applicable to the H264 encoder.
-
-.. _v4l2-mpeg-video-h264-fmo-change-direction:
-
-``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION``
-    (enum)
-
-enum v4l2_mpeg_video_h264_fmo_change_dir -
-    Specifies a direction of the slice group change for raster and wipe
-    maps. Applicable to the H264 encoder. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT``
-      - Raster scan or wipe right.
-    * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT``
-      - Reverse raster scan or wipe left.
-
-
-
-``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE (integer)``
-    Specifies the size of the first slice group for raster and wipe map.
-    Applicable to the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH (integer)``
-    Specifies the number of consecutive macroblocks for the interleaved
-    map. Applicable to the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_ASO (boolean)``
-    Enables arbitrary slice ordering in encoded bitstream. Applicable to
-    the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER (integer)``
-    Specifies the slice order in ASO. Applicable to the H264 encoder.
-    The supplied 32-bit integer is interpreted as follows (bit 0 = least
-    significant bit):
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - Bit 0:15
-      - Slice ID
-    * - Bit 16:32
-      - Slice position or order
-
-
-
-``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING (boolean)``
-    Enables H264 hierarchical coding. Applicable to the H264 encoder.
-
-.. _v4l2-mpeg-video-h264-hierarchical-coding-type:
-
-``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE``
-    (enum)
-
-enum v4l2_mpeg_video_h264_hierarchical_coding_type -
-    Specifies the hierarchical coding type. Applicable to the H264
-    encoder. Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B``
-      - Hierarchical B coding.
-    * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P``
-      - Hierarchical P coding.
-
-
-
-``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER (integer)``
-    Specifies the number of hierarchical coding layers. Applicable to
-    the H264 encoder.
-
-``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (integer)``
-    Specifies a user defined QP for each layer. Applicable to the H264
-    encoder. The supplied 32-bit integer is interpreted as follows (bit
-    0 = least significant bit):
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - Bit 0:15
-      - QP value
-    * - Bit 16:32
-      - Layer number
-
-
-.. _v4l2-mpeg-h264:
-
-``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
-    Specifies the sequence parameter set (as extracted from the
-    bitstream) for the associated H264 slice data. This includes the
-    necessary parameters for configuring a stateless hardware decoding
-    pipeline for H264. The bitstream parameters are defined according
-    to :ref:`h264`, section 7.4.2.1.1 "Sequence Parameter Set Data
-    Semantics". For further documentation, refer to the above
-    specification, unless there is an explicit comment stating
-    otherwise.
-
-    .. note::
-
-       This compound control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_sps
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_sps
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``profile_idc``
-      -
-    * - __u8
-      - ``constraint_set_flags``
-      - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>`
-    * - __u8
-      - ``level_idc``
-      -
-    * - __u8
-      - ``seq_parameter_set_id``
-      -
-    * - __u8
-      - ``chroma_format_idc``
-      -
-    * - __u8
-      - ``bit_depth_luma_minus8``
-      -
-    * - __u8
-      - ``bit_depth_chroma_minus8``
-      -
-    * - __u8
-      - ``log2_max_frame_num_minus4``
-      -
-    * - __u8
-      - ``pic_order_cnt_type``
-      -
-    * - __u8
-      - ``log2_max_pic_order_cnt_lsb_minus4``
-      -
-    * - __u8
-      - ``max_num_ref_frames``
-      -
-    * - __u8
-      - ``num_ref_frames_in_pic_order_cnt_cycle``
-      -
-    * - __s32
-      - ``offset_for_ref_frame[255]``
-      -
-    * - __s32
-      - ``offset_for_non_ref_pic``
-      -
-    * - __s32
-      - ``offset_for_top_to_bottom_field``
-      -
-    * - __u16
-      - ``pic_width_in_mbs_minus1``
-      -
-    * - __u16
-      - ``pic_height_in_map_units_minus1``
-      -
-    * - __u32
-      - ``flags``
-      - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>`
-
-.. _h264_sps_constraints_set_flags:
-
-``Sequence Parameter Set Constraints Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG``
-      - 0x00000001
-      -
-    * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG``
-      - 0x00000002
-      -
-    * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG``
-      - 0x00000004
-      -
-    * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG``
-      - 0x00000008
-      -
-    * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG``
-      - 0x00000010
-      -
-    * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG``
-      - 0x00000020
-      -
-
-.. _h264_sps_flags:
-
-``Sequence Parameter Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE``
-      - 0x00000001
-      -
-    * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS``
-      - 0x00000002
-      -
-    * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO``
-      - 0x00000004
-      -
-    * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED``
-      - 0x00000008
-      -
-    * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY``
-      - 0x00000010
-      -
-    * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD``
-      - 0x00000020
-      -
-    * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE``
-      - 0x00000040
-      -
-
-``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)``
-    Specifies the picture parameter set (as extracted from the
-    bitstream) for the associated H264 slice data. This includes the
-    necessary parameters for configuring a stateless hardware decoding
-    pipeline for H264.  The bitstream parameters are defined according
-    to :ref:`h264`, section 7.4.2.2 "Picture Parameter Set RBSP
-    Semantics". For further documentation, refer to the above
-    specification, unless there is an explicit comment stating
-    otherwise.
-
-    .. note::
-
-       This compound control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_pps
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_pps
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``pic_parameter_set_id``
-      -
-    * - __u8
-      - ``seq_parameter_set_id``
-      -
-    * - __u8
-      - ``num_slice_groups_minus1``
-      -
-    * - __u8
-      - ``num_ref_idx_l0_default_active_minus1``
-      -
-    * - __u8
-      - ``num_ref_idx_l1_default_active_minus1``
-      -
-    * - __u8
-      - ``weighted_bipred_idc``
-      -
-    * - __s8
-      - ``pic_init_qp_minus26``
-      -
-    * - __s8
-      - ``pic_init_qs_minus26``
-      -
-    * - __s8
-      - ``chroma_qp_index_offset``
-      -
-    * - __s8
-      - ``second_chroma_qp_index_offset``
-      -
-    * - __u16
-      - ``flags``
-      - See :ref:`Picture Parameter Set Flags <h264_pps_flags>`
-
-.. _h264_pps_flags:
-
-``Picture Parameter Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE``
-      - 0x00000001
-      -
-    * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT``
-      - 0x00000002
-      -
-    * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED``
-      - 0x00000004
-      -
-    * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
-      - 0x00000008
-      -
-    * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED``
-      - 0x00000010
-      -
-    * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT``
-      - 0x00000020
-      -
-    * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
-      - 0x00000040
-      -
-    * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT``
-      - 0x00000080
-      -
-
-``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)``
-    Specifies the scaling matrix (as extracted from the bitstream) for
-    the associated H264 slice data. The bitstream parameters are
-    defined according to :ref:`h264`, section 7.4.2.1.1.1 "Scaling
-    List Semantics". For further documentation, refer to the above
-    specification, unless there is an explicit comment stating
-    otherwise.
-
-    .. note::
-
-       This compound control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_scaling_matrix
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``scaling_list_4x4[6][16]``
-      - Scaling matrix after applying the inverse scanning process.
-        Expected list order is Intra Y, Intra Cb, Intra Cr, Inter Y,
-        Inter Cb, Inter Cr.
-    * - __u8
-      - ``scaling_list_8x8[6][64]``
-      - Scaling matrix after applying the inverse scanning process.
-        Expected list order is Intra Y, Inter Y, Intra Cb, Inter Cb,
-        Intra Cr, Inter Cr.
-
-``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)``
-    Specifies the slice parameters (as extracted from the bitstream)
-    for the associated H264 slice data. This includes the necessary
-    parameters for configuring a stateless hardware decoding pipeline
-    for H264.  The bitstream parameters are defined according to
-    :ref:`h264`, section 7.4.3 "Slice Header Semantics". For further
-    documentation, refer to the above specification, unless there is
-    an explicit comment stating otherwise.
-
-    .. note::
-
-       This compound control is not yet part of the public kernel API
-       and it is expected to change.
-
-       This structure is expected to be passed as an array, with one
-       entry for each slice included in the bitstream buffer.
-
-.. c:type:: v4l2_ctrl_h264_slice_params
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_slice_params
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``size``
-      -
-    * - __u32
-      - ``start_byte_offset``
-        Offset (in bytes) from the beginning of the OUTPUT buffer to the start
-        of the slice. If the slice starts with a start code, then this is the
-        offset to such start code. When operating in slice-based decoding mode
-        (see :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field should
-        be set to 0. When operating in frame-based decoding mode, this field
-        should be 0 for the first slice.
-    * - __u32
-      - ``header_bit_size``
-      -
-    * - __u16
-      - ``first_mb_in_slice``
-      -
-    * - __u8
-      - ``slice_type``
-      -
-    * - __u8
-      - ``pic_parameter_set_id``
-      -
-    * - __u8
-      - ``colour_plane_id``
-      -
-    * - __u8
-      - ``redundant_pic_cnt``
-      -
-    * - __u16
-      - ``frame_num``
-      -
-    * - __u16
-      - ``idr_pic_id``
-      -
-    * - __u16
-      - ``pic_order_cnt_lsb``
-      -
-    * - __s32
-      - ``delta_pic_order_cnt_bottom``
-      -
-    * - __s32
-      - ``delta_pic_order_cnt0``
-      -
-    * - __s32
-      - ``delta_pic_order_cnt1``
-      -
-    * - struct :c:type:`v4l2_h264_pred_weight_table`
-      - ``pred_weight_table``
-      -
-    * - __u32
-      - ``dec_ref_pic_marking_bit_size``
-      - Size in bits of the dec_ref_pic_marking() syntax element.
-    * - __u32
-      - ``pic_order_cnt_bit_size``
-      -
-    * - __u8
-      - ``cabac_init_idc``
-      -
-    * - __s8
-      - ``slice_qp_delta``
-      -
-    * - __s8
-      - ``slice_qs_delta``
-      -
-    * - __u8
-      - ``disable_deblocking_filter_idc``
-      -
-    * - __s8
-      - ``slice_alpha_c0_offset_div2``
-      -
-    * - __s8
-      - ``slice_beta_offset_div2``
-      -
-    * - __u8
-      - ``num_ref_idx_l0_active_minus1``
-      - If num_ref_idx_active_override_flag is not set, this field must be
-        set to the value of num_ref_idx_l0_default_active_minus1.
-    * - __u8
-      - ``num_ref_idx_l1_active_minus1``
-      - If num_ref_idx_active_override_flag is not set, this field must be
-        set to the value of num_ref_idx_l1_default_active_minus1.
-    * - __u32
-      - ``slice_group_change_cycle``
-      -
-    * - __u8
-      - ``ref_pic_list0[32]``
-      - Reference picture list after applying the per-slice modifications
-    * - __u8
-      - ``ref_pic_list1[32]``
-      - Reference picture list after applying the per-slice modifications
-    * - __u32
-      - ``flags``
-      - See :ref:`Slice Parameter Flags <h264_slice_flags>`
-
-.. _h264_slice_flags:
-
-``Slice Parameter Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC``
-      - 0x00000001
-      -
-    * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD``
-      - 0x00000002
-      -
-    * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
-      - 0x00000004
-      -
-    * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
-      - 0x00000008
-      -
-
-``Prediction Weight Table``
-
-    The bitstream parameters are defined according to :ref:`h264`,
-    section 7.4.3.2 "Prediction Weight Table Semantics". For further
-    documentation, refer to the above specification, unless there is
-    an explicit comment stating otherwise.
-
-.. c:type:: v4l2_h264_pred_weight_table
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_h264_pred_weight_table
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u16
-      - ``luma_log2_weight_denom``
-      -
-    * - __u16
-      - ``chroma_log2_weight_denom``
-      -
-    * - struct :c:type:`v4l2_h264_weight_factors`
-      - ``weight_factors[2]``
-      - The weight factors at index 0 are the weight factors for the reference
-        list 0, the one at index 1 for the reference list 1.
-
-.. c:type:: v4l2_h264_weight_factors
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_h264_weight_factors
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __s16
-      - ``luma_weight[32]``
-      -
-    * - __s16
-      - ``luma_offset[32]``
-      -
-    * - __s16
-      - ``chroma_weight[32][2]``
-      -
-    * - __s16
-      - ``chroma_offset[32][2]``
-      -
-
-``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)``
-    Specifies the decode parameters (as extracted from the bitstream)
-    for the associated H264 slice data. This includes the necessary
-    parameters for configuring a stateless hardware decoding pipeline
-    for H264. The bitstream parameters are defined according to
-    :ref:`h264`. For further documentation, refer to the above
-    specification, unless there is an explicit comment stating
-    otherwise.
-
-    .. note::
-
-       This compound control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_decode_params
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_decode_params
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - struct :c:type:`v4l2_h264_dpb_entry`
-      - ``dpb[16]``
-      -
-    * - __u16
-      - ``num_slices``
-      - Number of slices needed to decode the current frame/field. When
-        operating in slice-based decoding mode (see
-        :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field
-        should always be set to one.
-    * - __u16
-      - ``nal_ref_idc``
-      - NAL reference ID value coming from the NAL Unit header
-    * - __s32
-      - ``top_field_order_cnt``
-      - Picture Order Count for the coded top field
-    * - __s32
-      - ``bottom_field_order_cnt``
-      - Picture Order Count for the coded bottom field
-    * - __u32
-      - ``flags``
-      - See :ref:`Decode Parameters Flags <h264_decode_params_flags>`
-
-.. _h264_decode_params_flags:
-
-``Decode Parameters Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC``
-      - 0x00000001
-      - That picture is an IDR picture
-
-.. c:type:: v4l2_h264_dpb_entry
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_h264_dpb_entry
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u64
-      - ``reference_ts``
-      - Timestamp of the V4L2 capture buffer to use as reference, used
-        with B-coded and P-coded frames. The timestamp refers to the
-        ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
-        :c:func:`v4l2_timeval_to_ns()` function to convert the struct
-        :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
-    * - __u16
-      - ``frame_num``
-      -
-    * - __u16
-      - ``pic_num``
-      -
-    * - __s32
-      - ``top_field_order_cnt``
-      -
-    * - __s32
-      - ``bottom_field_order_cnt``
-      -
-    * - __u32
-      - ``flags``
-      - See :ref:`DPB Entry Flags <h264_dpb_flags>`
-
-.. _h264_dpb_flags:
-
-``DPB Entries Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
-      - 0x00000001
-      - The DPB entry is valid and should be considered
-    * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
-      - 0x00000002
-      - The DPB entry is currently being used as a reference frame
-    * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
-      - 0x00000004
-      - The DPB entry is a long term reference frame
-    * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD``
-      - 0x00000008
-      - The DPB entry is a field reference, which means only one of the field
-        will be used when decoding the new frame/field. When not set the DPB
-        entry is a frame reference (both fields will be used). Note that this
-        flag does not say anything about the number of fields contained in the
-        reference frame, it just describes the one used to decode the new
-        field/frame
-    * - ``V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD``
-      - 0x00000010
-      - The DPB entry is a bottom field reference (only the bottom field of the
-        reference frame is needed to decode the new frame/field). Only valid if
-        V4L2_H264_DPB_ENTRY_FLAG_FIELD is set. When
-        V4L2_H264_DPB_ENTRY_FLAG_FIELD is set but
-        V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD is not, that means the
-        DPB entry is a top field reference
-
-``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)``
-    Specifies the decoding mode to use. Currently exposes slice-based and
-    frame-based decoding but new modes might be added later on.
-    This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE
-    pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE
-    are required to set this control in order to specify the decoding mode
-    that is expected for the buffer.
-    Drivers may expose a single or multiple decoding modes, depending
-    on what they can support.
-
-    .. note::
-
-       This menu control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_mpeg_video_h264_decode_mode
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED``
-      - 0
-      - Decoding is done at the slice granularity.
-        In this mode, ``num_slices`` field in struct
-        :c:type:`v4l2_ctrl_h264_decode_params` should be set to 1,
-        and ``start_byte_offset`` in struct
-        :c:type:`v4l2_ctrl_h264_slice_params` should be set to 0.
-        The OUTPUT buffer must contain a single slice.
-    * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED``
-      - 1
-      - Decoding is done at the frame granularity.
-        In this mode, ``num_slices`` field in struct
-        :c:type:`v4l2_ctrl_h264_decode_params` should be set to the number
-        of slices in the frame, and ``start_byte_offset`` in struct
-        :c:type:`v4l2_ctrl_h264_slice_params` should be set accordingly
-        for each slice. For the first slice, ``start_byte_offset`` should
-        be zero.
-        The OUTPUT buffer must contain all slices needed to decode the
-        frame. The OUTPUT buffer must also contain both fields.
-
-``V4L2_CID_MPEG_VIDEO_H264_START_CODE (enum)``
-    Specifies the H264 slice start code expected for each slice.
-    This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE
-    pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE
-    are required to set this control in order to specify the start code
-    that is expected for the buffer.
-    Drivers may expose a single or multiple start codes, depending
-    on what they can support.
-
-    .. note::
-
-       This menu control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_mpeg_video_h264_start_code
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_MPEG_VIDEO_H264_START_CODE_NONE``
-      - 0
-      - Selecting this value specifies that H264 slices are passed
-        to the driver without any start code.
-    * - ``V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B``
-      - 1
-      - Selecting this value specifies that H264 slices are expected
-        to be prefixed by Annex B start codes. According to :ref:`h264`
-        valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
-
-.. _v4l2-mpeg-mpeg2:
-
-``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS (struct)``
-    Specifies the slice parameters (as extracted from the bitstream) for the
-    associated MPEG-2 slice data. This includes the necessary parameters for
-    configuring a stateless hardware decoding pipeline for MPEG-2.
-    The bitstream parameters are defined according to :ref:`mpeg2part2`.
-
-    .. note::
-
-       This compound control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_ctrl_mpeg2_slice_params
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
-
-.. flat-table:: struct v4l2_ctrl_mpeg2_slice_params
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``bit_size``
-      - Size (in bits) of the current slice data.
-    * - __u32
-      - ``data_bit_offset``
-      - Offset (in bits) to the video data in the current slice data.
-    * - struct :c:type:`v4l2_mpeg2_sequence`
-      - ``sequence``
-      - Structure with MPEG-2 sequence metadata, merging relevant fields from
-	the sequence header and sequence extension parts of the bitstream.
-    * - struct :c:type:`v4l2_mpeg2_picture`
-      - ``picture``
-      - Structure with MPEG-2 picture metadata, merging relevant fields from
-	the picture header and picture coding extension parts of the bitstream.
-    * - __u64
-      - ``backward_ref_ts``
-      - Timestamp of the V4L2 capture buffer to use as backward reference, used
-        with B-coded and P-coded frames. The timestamp refers to the
-	``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
-	:c:func:`v4l2_timeval_to_ns()` function to convert the struct
-	:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
-    * - __u64
-      - ``forward_ref_ts``
-      - Timestamp for the V4L2 capture buffer to use as forward reference, used
-        with B-coded frames. The timestamp refers to the ``timestamp`` field in
-	struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
-	function to convert the struct :c:type:`timeval` in struct
-	:c:type:`v4l2_buffer` to a __u64.
-    * - __u32
-      - ``quantiser_scale_code``
-      - Code used to determine the quantization scale to use for the IDCT.
-
-.. c:type:: v4l2_mpeg2_sequence
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
-
-.. flat-table:: struct v4l2_mpeg2_sequence
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u16
-      - ``horizontal_size``
-      - The width of the displayable part of the frame's luminance component.
-    * - __u16
-      - ``vertical_size``
-      - The height of the displayable part of the frame's luminance component.
-    * - __u32
-      - ``vbv_buffer_size``
-      - Used to calculate the required size of the video buffering verifier,
-	defined (in bits) as: 16 * 1024 * vbv_buffer_size.
-    * - __u16
-      - ``profile_and_level_indication``
-      - The current profile and level indication as extracted from the
-	bitstream.
-    * - __u8
-      - ``progressive_sequence``
-      - Indication that all the frames for the sequence are progressive instead
-	of interlaced.
-    * - __u8
-      - ``chroma_format``
-      - The chrominance sub-sampling format (1: 4:2:0, 2: 4:2:2, 3: 4:4:4).
-
-.. c:type:: v4l2_mpeg2_picture
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
-
-.. flat-table:: struct v4l2_mpeg2_picture
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``picture_coding_type``
-      - Picture coding type for the frame covered by the current slice
-	(V4L2_MPEG2_PICTURE_CODING_TYPE_I, V4L2_MPEG2_PICTURE_CODING_TYPE_P or
-	V4L2_MPEG2_PICTURE_CODING_TYPE_B).
-    * - __u8
-      - ``f_code[2][2]``
-      - Motion vector codes.
-    * - __u8
-      - ``intra_dc_precision``
-      - Precision of Discrete Cosine transform (0: 8 bits precision,
-	1: 9 bits precision, 2: 10 bits precision, 3: 11 bits precision).
-    * - __u8
-      - ``picture_structure``
-      - Picture structure (1: interlaced top field, 2: interlaced bottom field,
-	3: progressive frame).
-    * - __u8
-      - ``top_field_first``
-      - If set to 1 and interlaced stream, top field is output first.
-    * - __u8
-      - ``frame_pred_frame_dct``
-      - If set to 1, only frame-DCT and frame prediction are used.
-    * - __u8
-      - ``concealment_motion_vectors``
-      -  If set to 1, motion vectors are coded for intra macroblocks.
-    * - __u8
-      - ``q_scale_type``
-      - This flag affects the inverse quantization process.
-    * - __u8
-      - ``intra_vlc_format``
-      - This flag affects the decoding of transform coefficient data.
-    * - __u8
-      - ``alternate_scan``
-      - This flag affects the decoding of transform coefficient data.
-    * - __u8
-      - ``repeat_first_field``
-      - This flag affects the decoding process of progressive frames.
-    * - __u16
-      - ``progressive_frame``
-      - Indicates whether the current frame is progressive.
-
-``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION (struct)``
-    Specifies quantization matrices (as extracted from the bitstream) for the
-    associated MPEG-2 slice data.
-
-    .. note::
-
-       This compound control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_ctrl_mpeg2_quantization
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.2cm}|p{8.0cm}|p{7.4cm}|
-
-.. raw:: latex
-
-    \small
-
-.. flat-table:: struct v4l2_ctrl_mpeg2_quantization
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``load_intra_quantiser_matrix``
-      - One bit to indicate whether to load the ``intra_quantiser_matrix`` data.
-    * - __u8
-      - ``load_non_intra_quantiser_matrix``
-      - One bit to indicate whether to load the ``non_intra_quantiser_matrix``
-	data.
-    * - __u8
-      - ``load_chroma_intra_quantiser_matrix``
-      - One bit to indicate whether to load the
-	``chroma_intra_quantiser_matrix`` data, only relevant for non-4:2:0 YUV
-	formats.
-    * - __u8
-      - ``load_chroma_non_intra_quantiser_matrix``
-      - One bit to indicate whether to load the
-	``chroma_non_intra_quantiser_matrix`` data, only relevant for non-4:2:0
-	YUV formats.
-    * - __u8
-      - ``intra_quantiser_matrix[64]``
-      - The quantization matrix coefficients for intra-coded frames, in zigzag
-	scanning order. It is relevant for both luma and chroma components,
-	although it can be superseded by the chroma-specific matrix for
-	non-4:2:0 YUV formats.
-    * - __u8
-      - ``non_intra_quantiser_matrix[64]``
-      - The quantization matrix coefficients for non-intra-coded frames, in
-	zigzag scanning order. It is relevant for both luma and chroma
-	components, although it can be superseded by the chroma-specific matrix
-	for non-4:2:0 YUV formats.
-    * - __u8
-      - ``chroma_intra_quantiser_matrix[64]``
-      - The quantization matrix coefficients for the chominance component of
-	intra-coded frames, in zigzag scanning order. Only relevant for
-	non-4:2:0 YUV formats.
-    * - __u8
-      - ``chroma_non_intra_quantiser_matrix[64]``
-      - The quantization matrix coefficients for the chrominance component of
-	non-intra-coded frames, in zigzag scanning order. Only relevant for
-	non-4:2:0 YUV formats.
-
-``V4L2_CID_FWHT_I_FRAME_QP (integer)``
-    Quantization parameter for an I frame for FWHT. Valid range: from 1
-    to 31.
-
-``V4L2_CID_FWHT_P_FRAME_QP (integer)``
-    Quantization parameter for a P frame for FWHT. Valid range: from 1
-    to 31.
-
-.. _v4l2-mpeg-vp8:
-
-``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (struct)``
-    Specifies the frame parameters for the associated VP8 parsed frame data.
-    This includes the necessary parameters for
-    configuring a stateless hardware decoding pipeline for VP8.
-    The bitstream parameters are defined according to :ref:`vp8`.
-
-    .. note::
-
-       This compound control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_ctrl_vp8_frame_header
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
-
-.. flat-table:: struct v4l2_ctrl_vp8_frame_header
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - struct :c:type:`v4l2_vp8_segment_header`
-      - ``segment_header``
-      - Structure with segment-based adjustments metadata.
-    * - struct :c:type:`v4l2_vp8_loopfilter_header`
-      - ``loopfilter_header``
-      - Structure with loop filter level adjustments metadata.
-    * - struct :c:type:`v4l2_vp8_quantization_header`
-      - ``quant_header``
-      - Structure with VP8 dequantization indices metadata.
-    * - struct :c:type:`v4l2_vp8_entropy_header`
-      - ``entropy_header``
-      - Structure with VP8 entropy coder probabilities metadata.
-    * - struct :c:type:`v4l2_vp8_entropy_coder_state`
-      - ``coder_state``
-      - Structure with VP8 entropy coder state.
-    * - __u16
-      - ``width``
-      - The width of the frame. Must be set for all frames.
-    * - __u16
-      - ``height``
-      - The height of the frame. Must be set for all frames.
-    * - __u8
-      - ``horizontal_scale``
-      - Horizontal scaling factor.
-    * - __u8
-      - ``vertical_scaling factor``
-      - Vertical scale.
-    * - __u8
-      - ``version``
-      - Bitstream version.
-    * - __u8
-      - ``prob_skip_false``
-      - Indicates the probability that the macroblock is not skipped.
-    * - __u8
-      - ``prob_intra``
-      - Indicates the probability that a macroblock is intra-predicted.
-    * - __u8
-      - ``prob_last``
-      - Indicates the probability that the last reference frame is used
-        for inter-prediction
-    * - __u8
-      - ``prob_gf``
-      - Indicates the probability that the golden reference frame is used
-        for inter-prediction
-    * - __u8
-      - ``num_dct_parts``
-      - Number of DCT coefficients partitions. Must be one of: 1, 2, 4, or 8.
-    * - __u32
-      - ``first_part_size``
-      - Size of the first partition, i.e. the control partition.
-    * - __u32
-      - ``first_part_header_bits``
-      - Size in bits of the first partition header portion.
-    * - __u32
-      - ``dct_part_sizes[8]``
-      - DCT coefficients sizes.
-    * - __u64
-      - ``last_frame_ts``
-      - Timestamp for the V4L2 capture buffer to use as last reference frame, used
-        with inter-coded frames. The timestamp refers to the ``timestamp`` field in
-	struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
-	function to convert the struct :c:type:`timeval` in struct
-	:c:type:`v4l2_buffer` to a __u64.
-    * - __u64
-      - ``golden_frame_ts``
-      - Timestamp for the V4L2 capture buffer to use as last reference frame, used
-        with inter-coded frames. The timestamp refers to the ``timestamp`` field in
-	struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
-	function to convert the struct :c:type:`timeval` in struct
-	:c:type:`v4l2_buffer` to a __u64.
-    * - __u64
-      - ``alt_frame_ts``
-      - Timestamp for the V4L2 capture buffer to use as alternate reference frame, used
-        with inter-coded frames. The timestamp refers to the ``timestamp`` field in
-	struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
-	function to convert the struct :c:type:`timeval` in struct
-	:c:type:`v4l2_buffer` to a __u64.
-    * - __u64
-      - ``flags``
-      - See :ref:`Frame Header Flags <vp8_frame_header_flags>`
-
-.. _vp8_frame_header_flags:
-
-``Frame Header Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME``
-      - 0x01
-      - Indicates if the frame is a key frame.
-    * - ``V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL``
-      - 0x02
-      - Experimental bitstream.
-    * - ``V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME``
-      - 0x04
-      - Show frame flag, indicates if the frame is for display.
-    * - ``V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF``
-      - 0x08
-      - Enable/disable skipping of macroblocks with no non-zero coefficients.
-    * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN``
-      - 0x10
-      - Sign of motion vectors when the golden frame is referenced.
-    * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT``
-      - 0x20
-      - Sign of motion vectors when the alt frame is referenced.
-
-.. c:type:: v4l2_vp8_entropy_coder_state
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
-
-.. flat-table:: struct v4l2_vp8_entropy_coder_state
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``range``
-      -
-    * - __u8
-      - ``value``
-      -
-    * - __u8
-      - ``bit_count``
-      -
-    * - __u8
-      - ``padding``
-      - Applications and drivers must set this to zero.
-
-.. c:type:: v4l2_vp8_segment_header
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
-
-.. flat-table:: struct v4l2_vp8_segment_header
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __s8
-      - ``quant_update[4]``
-      - Signed quantizer value update.
-    * - __s8
-      - ``lf_update[4]``
-      - Signed loop filter level value update.
-    * - __u8
-      - ``segment_probs[3]``
-      - Segment probabilities.
-    * - __u8
-      - ``padding``
-      - Applications and drivers must set this to zero.
-    * - __u32
-      - ``flags``
-      - See :ref:`Segment Header Flags <vp8_segment_header_flags>`
-
-.. _vp8_segment_header_flags:
-
-``Segment Header Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED``
-      - 0x01
-      - Enable/disable segment-based adjustments.
-    * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP``
-      - 0x02
-      - Indicates if the macroblock segmentation map is updated in this frame.
-    * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA``
-      - 0x04
-      - Indicates if the segment feature data is updated in this frame.
-    * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE``
-      - 0x08
-      - If is set, the segment feature data mode is delta-value.
-        If cleared, it's absolute-value.
-
-.. c:type:: v4l2_vp8_loopfilter_header
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
-
-.. flat-table:: struct v4l2_vp8_loopfilter_header
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __s8
-      - ``ref_frm_delta[4]``
-      - Reference adjustment (signed) delta value.
-    * - __s8
-      - ``mb_mode_delta[4]``
-      - Macroblock prediction mode adjustment (signed) delta value.
-    * - __u8
-      - ``sharpness_level``
-      - Sharpness level
-    * - __u8
-      - ``level``
-      - Filter level
-    * - __u16
-      - ``padding``
-      - Applications and drivers must set this to zero.
-    * - __u32
-      - ``flags``
-      - See :ref:`Loopfilter Header Flags <vp8_loopfilter_header_flags>`
-
-.. _vp8_loopfilter_header_flags:
-
-``Loopfilter Header Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_VP8_LF_HEADER_ADJ_ENABLE``
-      - 0x01
-      - Enable/disable macroblock-level loop filter adjustment.
-    * - ``V4L2_VP8_LF_HEADER_DELTA_UPDATE``
-      - 0x02
-      - Indicates if the delta values used in an adjustment are updated.
-    * - ``V4L2_VP8_LF_FILTER_TYPE_SIMPLE``
-      - 0x04
-      - If set, indicates the filter type is simple.
-        If cleared, the filter type is normal.
-
-.. c:type:: v4l2_vp8_quantization_header
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
-
-.. flat-table:: struct v4l2_vp8_quantization_header
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``y_ac_qi``
-      - Luma AC coefficient table index.
-    * - __s8
-      - ``y_dc_delta``
-      - Luma DC delta vaue.
-    * - __s8
-      - ``y2_dc_delta``
-      - Y2 block DC delta value.
-    * - __s8
-      - ``y2_ac_delta``
-      - Y2 block AC delta value.
-    * - __s8
-      - ``uv_dc_delta``
-      - Chroma DC delta value.
-    * - __s8
-      - ``uv_ac_delta``
-      - Chroma AC delta value.
-    * - __u16
-      - ``padding``
-      - Applications and drivers must set this to zero.
-
-.. c:type:: v4l2_vp8_entropy_header
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
-
-.. flat-table:: struct v4l2_vp8_entropy_header
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``coeff_probs[4][8][3][11]``
-      - Coefficient update probabilities.
-    * - __u8
-      - ``y_mode_probs[4]``
-      - Luma mode update probabilities.
-    * - __u8
-      - ``uv_mode_probs[3]``
-      - Chroma mode update probabilities.
-    * - __u8
-      - ``mv_probs[2][19]``
-      - MV decoding update probabilities.
-    * - __u8
-      - ``padding[3]``
-      - Applications and drivers must set this to zero.
-
-.. raw:: latex
-
-    \normalsize
-
-
-MFC 5.1 MPEG Controls
-=====================
-
-The following MPEG class controls deal with MPEG decoding and encoding
-settings that are specific to the Multi Format Codec 5.1 device present
-in the S5P family of SoCs by Samsung.
-
-
-.. _mfc51-control-id:
-
-MFC 5.1 Control IDs
--------------------
-
-``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE (boolean)``
-    If the display delay is enabled then the decoder is forced to return
-    a CAPTURE buffer (decoded frame) after processing a certain number
-    of OUTPUT buffers. The delay can be set through
-    ``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY``. This
-    feature can be used for example for generating thumbnails of videos.
-    Applicable to the H264 decoder.
-
-``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (integer)``
-    Display delay value for H264 decoder. The decoder is forced to
-    return a decoded frame after the set 'display delay' number of
-    frames. If this number is low it may result in frames returned out
-    of display order, in addition the hardware may still be using the
-    returned buffer as a reference picture for subsequent frames.
-
-``V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (integer)``
-    The number of reference pictures used for encoding a P picture.
-    Applicable to the H264 encoder.
-
-``V4L2_CID_MPEG_MFC51_VIDEO_PADDING (boolean)``
-    Padding enable in the encoder - use a color instead of repeating
-    border pixels. Applicable to encoders.
-
-``V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV (integer)``
-    Padding color in the encoder. Applicable to encoders. The supplied
-    32-bit integer is interpreted as follows (bit 0 = least significant
-    bit):
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - Bit 0:7
-      - V chrominance information
-    * - Bit 8:15
-      - U chrominance information
-    * - Bit 16:23
-      - Y luminance information
-    * - Bit 24:31
-      - Must be zero.
-
-
-
-``V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (integer)``
-    Reaction coefficient for MFC rate control. Applicable to encoders.
-
-    .. note::
-
-       #. Valid only when the frame level RC is enabled.
-
-       #. For tight CBR, this field must be small (ex. 2 ~ 10). For
-	  VBR, this field must be large (ex. 100 ~ 1000).
-
-       #. It is not recommended to use the greater number than
-	  FRAME_RATE * (10^9 / BIT_RATE).
-
-``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (boolean)``
-    Adaptive rate control for dark region. Valid only when H.264 and
-    macroblock level RC is enabled
-    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
-    encoder.
-
-``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH (boolean)``
-    Adaptive rate control for smooth region. Valid only when H.264 and
-    macroblock level RC is enabled
-    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
-    encoder.
-
-``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (boolean)``
-    Adaptive rate control for static region. Valid only when H.264 and
-    macroblock level RC is enabled
-    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
-    encoder.
-
-``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY (boolean)``
-    Adaptive rate control for activity region. Valid only when H.264 and
-    macroblock level RC is enabled
-    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
-    encoder.
-
-.. _v4l2-mpeg-mfc51-video-frame-skip-mode:
-
-``V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE``
-    (enum)
-
-enum v4l2_mpeg_mfc51_video_frame_skip_mode -
-    Indicates in what conditions the encoder should skip frames. If
-    encoding a frame would cause the encoded stream to be larger then a
-    chosen data limit then the frame will be skipped. Possible values
-    are:
-
-
-.. tabularcolumns:: |p{9.2cm}|p{8.3cm}|
-
-.. raw:: latex
-
-    \small
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED``
-      - Frame skip mode is disabled.
-    * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT``
-      - Frame skip mode enabled and buffer limit is set by the chosen
-	level and is defined by the standard.
-    * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT``
-      - Frame skip mode enabled and buffer limit is set by the VBV
-	(MPEG1/2/4) or CPB (H264) buffer size control.
-
-.. raw:: latex
-
-    \normalsize
-
-``V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT (integer)``
-    Enable rate-control with fixed target bit. If this setting is
-    enabled, then the rate control logic of the encoder will calculate
-    the average bitrate for a GOP and keep it below or equal the set
-    bitrate target. Otherwise the rate control logic calculates the
-    overall average bitrate for the stream and keeps it below or equal
-    to the set bitrate. In the first case the average bitrate for the
-    whole stream will be smaller then the set bitrate. This is caused
-    because the average is calculated for smaller number of frames, on
-    the other hand enabling this setting will ensure that the stream
-    will meet tight bandwidth constraints. Applicable to encoders.
-
-.. _v4l2-mpeg-mfc51-video-force-frame-type:
-
-``V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE``
-    (enum)
-
-enum v4l2_mpeg_mfc51_video_force_frame_type -
-    Force a frame type for the next queued buffer. Applicable to
-    encoders. Possible values are:
-
-.. tabularcolumns:: |p{9.5cm}|p{8.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_DISABLED``
-      - Forcing a specific frame type disabled.
-    * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_I_FRAME``
-      - Force an I-frame.
-    * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_NOT_CODED``
-      - Force a non-coded frame.
-
-
-.. _v4l2-mpeg-fwht:
-
-``V4L2_CID_MPEG_VIDEO_FWHT_PARAMS (struct)``
-    Specifies the fwht parameters (as extracted from the bitstream) for the
-    associated FWHT data. This includes the necessary parameters for
-    configuring a stateless hardware decoding pipeline for FWHT.
-
-    .. note::
-
-       This compound control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_ctrl_fwht_params
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.4cm}|p{4.3cm}|p{11.8cm}|
-
-.. flat-table:: struct v4l2_ctrl_fwht_params
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u64
-      - ``backward_ref_ts``
-      - Timestamp of the V4L2 capture buffer to use as backward reference, used
-        with P-coded frames. The timestamp refers to the
-	``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
-	:c:func:`v4l2_timeval_to_ns()` function to convert the struct
-	:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
-    * - __u32
-      - ``version``
-      - The version of the codec
-    * - __u32
-      - ``width``
-      - The width of the frame
-    * - __u32
-      - ``height``
-      - The height of the frame
-    * - __u32
-      - ``flags``
-      - The flags of the frame, see :ref:`fwht-flags`.
-    * - __u32
-      - ``colorspace``
-      - The colorspace of the frame, from enum :c:type:`v4l2_colorspace`.
-    * - __u32
-      - ``xfer_func``
-      - The transfer function, from enum :c:type:`v4l2_xfer_func`.
-    * - __u32
-      - ``ycbcr_enc``
-      - The Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`.
-    * - __u32
-      - ``quantization``
-      - The quantization range, from enum :c:type:`v4l2_quantization`.
-
-
-
-.. _fwht-flags:
-
-FWHT Flags
-============
-
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.3cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``FWHT_FL_IS_INTERLACED``
-      - 0x00000001
-      - Set if this is an interlaced format
-    * - ``FWHT_FL_IS_BOTTOM_FIRST``
-      - 0x00000002
-      - Set if this is a bottom-first (NTSC) interlaced format
-    * - ``FWHT_FL_IS_ALTERNATE``
-      - 0x00000004
-      - Set if each 'frame' contains just one field
-    * - ``FWHT_FL_IS_BOTTOM_FIELD``
-      - 0x00000008
-      - If FWHT_FL_IS_ALTERNATE was set, then this is set if this 'frame' is the
-	bottom field, else it is the top field.
-    * - ``FWHT_FL_LUMA_IS_UNCOMPRESSED``
-      - 0x00000010
-      - Set if the luma plane is uncompressed
-    * - ``FWHT_FL_CB_IS_UNCOMPRESSED``
-      - 0x00000020
-      - Set if the cb plane is uncompressed
-    * - ``FWHT_FL_CR_IS_UNCOMPRESSED``
-      - 0x00000040
-      - Set if the cr plane is uncompressed
-    * - ``FWHT_FL_CHROMA_FULL_HEIGHT``
-      - 0x00000080
-      - Set if the chroma plane has the same height as the luma plane,
-	else the chroma plane is half the height of the luma plane
-    * - ``FWHT_FL_CHROMA_FULL_WIDTH``
-      - 0x00000100
-      - Set if the chroma plane has the same width as the luma plane,
-	else the chroma plane is half the width of the luma plane
-    * - ``FWHT_FL_ALPHA_IS_UNCOMPRESSED``
-      - 0x00000200
-      - Set if the alpha plane is uncompressed
-    * - ``FWHT_FL_I_FRAME``
-      - 0x00000400
-      - Set if this is an I-frame
-    * - ``FWHT_FL_COMPONENTS_NUM_MSK``
-      - 0x00070000
-      - A 4-values flag - the number of components - 1
-    * - ``FWHT_FL_PIXENC_YUV``
-      - 0x00080000
-      - Set if the pixel encoding is YUV
-    * - ``FWHT_FL_PIXENC_RGB``
-      - 0x00100000
-      - Set if the pixel encoding is RGB
-    * - ``FWHT_FL_PIXENC_HSV``
-      - 0x00180000
-      - Set if the pixel encoding is HSV
-
-
-CX2341x MPEG Controls
-=====================
-
-The following MPEG class controls deal with MPEG encoding settings that
-are specific to the Conexant CX23415 and CX23416 MPEG encoding chips.
-
-
-.. _cx2341x-control-id:
-
-CX2341x Control IDs
--------------------
-
-.. _v4l2-mpeg-cx2341x-video-spatial-filter-mode:
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE``
-    (enum)
-
-enum v4l2_mpeg_cx2341x_video_spatial_filter_mode -
-    Sets the Spatial Filter mode (default ``MANUAL``). Possible values
-    are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL``
-      - Choose the filter manually
-    * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO``
-      - Choose the filter automatically
-
-
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER (integer (0-15))``
-    The setting for the Spatial Filter. 0 = off, 15 = maximum. (Default
-    is 0.)
-
-.. _luma-spatial-filter-type:
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE``
-    (enum)
-
-enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type -
-    Select the algorithm to use for the Luma Spatial Filter (default
-    ``1D_HOR``). Possible values:
-
-.. tabularcolumns:: |p{14.5cm}|p{3.0cm}|
-
-.. raw:: latex
-
-    \small
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF``
-      - No filter
-    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR``
-      - One-dimensional horizontal
-    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT``
-      - One-dimensional vertical
-    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE``
-      - Two-dimensional separable
-    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE``
-      - Two-dimensional symmetrical non-separable
-
-.. raw:: latex
-
-    \normalsize
-
-
-
-.. _chroma-spatial-filter-type:
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE``
-    (enum)
-
-enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type -
-    Select the algorithm for the Chroma Spatial Filter (default
-    ``1D_HOR``). Possible values are:
-
-
-.. tabularcolumns:: |p{14.0cm}|p{3.5cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF``
-      - No filter
-    * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR``
-      - One-dimensional horizontal
-
-
-
-.. _v4l2-mpeg-cx2341x-video-temporal-filter-mode:
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE``
-    (enum)
-
-enum v4l2_mpeg_cx2341x_video_temporal_filter_mode -
-    Sets the Temporal Filter mode (default ``MANUAL``). Possible values
-    are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL``
-      - Choose the filter manually
-    * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO``
-      - Choose the filter automatically
-
-
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (integer (0-31))``
-    The setting for the Temporal Filter. 0 = off, 31 = maximum. (Default
-    is 8 for full-scale capturing and 0 for scaled capturing.)
-
-.. _v4l2-mpeg-cx2341x-video-median-filter-type:
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE``
-    (enum)
-
-enum v4l2_mpeg_cx2341x_video_median_filter_type -
-    Median Filter Type (default ``OFF``). Possible values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF``
-      - No filter
-    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR``
-      - Horizontal filter
-    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT``
-      - Vertical filter
-    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT``
-      - Horizontal and vertical filter
-    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG``
-      - Diagonal filter
-
-
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (integer (0-255))``
-    Threshold above which the luminance median filter is enabled
-    (default 0)
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP (integer (0-255))``
-    Threshold below which the luminance median filter is enabled
-    (default 255)
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (integer (0-255))``
-    Threshold above which the chroma median filter is enabled (default
-    0)
-
-``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (integer (0-255))``
-    Threshold below which the chroma median filter is enabled (default
-    255)
-
-``V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (boolean)``
-    The CX2341X MPEG encoder can insert one empty MPEG-2 PES packet into
-    the stream between every four video frames. The packet size is 2048
-    bytes, including the packet_start_code_prefix and stream_id
-    fields. The stream_id is 0xBF (private stream 2). The payload
-    consists of 0x00 bytes, to be filled in by the application. 0 = do
-    not insert, 1 = insert packets.
-
-
-VPX Control Reference
-=====================
-
-The VPX controls include controls for encoding parameters of VPx video
-codec.
-
-
-.. _vpx-control-id:
-
-VPX Control IDs
----------------
-
-.. _v4l2-vpx-num-partitions:
-
-``V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS``
-    (enum)
-
-enum v4l2_vp8_num_partitions -
-    The number of token partitions to use in VP8 encoder. Possible
-    values are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION``
-      - 1 coefficient partition
-    * - ``V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS``
-      - 2 coefficient partitions
-    * - ``V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS``
-      - 4 coefficient partitions
-    * - ``V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS``
-      - 8 coefficient partitions
-
-
-
-``V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 (boolean)``
-    Setting this prevents intra 4x4 mode in the intra mode decision.
-
-.. _v4l2-vpx-num-ref-frames:
-
-``V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES``
-    (enum)
-
-enum v4l2_vp8_num_ref_frames -
-    The number of reference pictures for encoding P frames. Possible
-    values are:
-
-.. tabularcolumns:: |p{7.9cm}|p{9.6cm}|
-
-.. raw:: latex
-
-    \small
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME``
-      - Last encoded frame will be searched
-    * - ``V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME``
-      - Two frames will be searched among the last encoded frame, the
-	golden frame and the alternate reference (altref) frame. The
-	encoder implementation will decide which two are chosen.
-    * - ``V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME``
-      - The last encoded frame, the golden frame and the altref frame will
-	be searched.
-
-.. raw:: latex
-
-    \normalsize
-
-
-
-``V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL (integer)``
-    Indicates the loop filter level. The adjustment of the loop filter
-    level is done via a delta value against a baseline loop filter
-    value.
-
-``V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS (integer)``
-    This parameter affects the loop filter. Anything above zero weakens
-    the deblocking effect on the loop filter.
-
-``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD (integer)``
-    Sets the refresh period for the golden frame. The period is defined
-    in number of frames. For a value of 'n', every nth frame starting
-    from the first key frame will be taken as a golden frame. For eg.
-    for encoding sequence of 0, 1, 2, 3, 4, 5, 6, 7 where the golden
-    frame refresh period is set as 4, the frames 0, 4, 8 etc will be
-    taken as the golden frames as frame 0 is always a key frame.
-
-.. _v4l2-vpx-golden-frame-sel:
-
-``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL``
-    (enum)
-
-enum v4l2_vp8_golden_frame_sel -
-    Selects the golden frame for encoding. Possible values are:
-
-.. raw:: latex
-
-    \scriptsize
-
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV``
-      - Use the (n-2)th frame as a golden frame, current frame index being
-	'n'.
-    * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD``
-      - Use the previous specific frame indicated by
-	``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD`` as a
-	golden frame.
-
-.. raw:: latex
-
-    \normalsize
-
-
-``V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (integer)``
-    Minimum quantization parameter for VP8.
-
-``V4L2_CID_MPEG_VIDEO_VPX_MAX_QP (integer)``
-    Maximum quantization parameter for VP8.
-
-``V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP (integer)``
-    Quantization parameter for an I frame for VP8.
-
-``V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (integer)``
-    Quantization parameter for a P frame for VP8.
-
-.. _v4l2-mpeg-video-vp8-profile:
-
-``V4L2_CID_MPEG_VIDEO_VP8_PROFILE``
-    (enum)
-
-enum v4l2_mpeg_video_vp8_profile -
-    This control allows selecting the profile for VP8 encoder.
-    This is also used to enumerate supported profiles by VP8 encoder or decoder.
-    Possible values are:
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_0``
-      - Profile 0
-    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_1``
-      - Profile 1
-    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_2``
-      - Profile 2
-    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3``
-      - Profile 3
-
-.. _v4l2-mpeg-video-vp9-profile:
-
-``V4L2_CID_MPEG_VIDEO_VP9_PROFILE``
-    (enum)
-
-enum v4l2_mpeg_video_vp9_profile -
-    This control allows selecting the profile for VP9 encoder.
-    This is also used to enumerate supported profiles by VP9 encoder or decoder.
-    Possible values are:
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0``
-      - Profile 0
-    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1``
-      - Profile 1
-    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2``
-      - Profile 2
-    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3``
-      - Profile 3
-
-
-High Efficiency Video Coding (HEVC/H.265) Control Reference
-===========================================================
-
-The HEVC/H.265 controls include controls for encoding parameters of HEVC/H.265
-video codec.
-
-
-.. _hevc-control-id:
-
-HEVC/H.265 Control IDs
-----------------------
-
-``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)``
-    Minimum quantization parameter for HEVC.
-    Valid range: from 0 to 51.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)``
-    Maximum quantization parameter for HEVC.
-    Valid range: from 0 to 51.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)``
-    Quantization parameter for an I frame for HEVC.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (integer)``
-    Quantization parameter for a P frame for HEVC.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (integer)``
-    Quantization parameter for a B frame for HEVC.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)``
-    HIERARCHICAL_QP allows the host to specify the quantization parameter
-    values for each temporal layer through HIERARCHICAL_QP_LAYER. This is
-    valid only if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the
-    control value to 1 enables setting of the QP values for the layers.
-
-.. _v4l2-hevc-hier-coding-type:
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE``
-    (enum)
-
-enum v4l2_mpeg_video_hevc_hier_coding_type -
-    Selects the hierarchical coding type for encoding. Possible values are:
-
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B``
-      - Use the B frame for hierarchical coding.
-    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P``
-      - Use the P frame for hierarchical coding.
-
-.. raw:: latex
-
-    \normalsize
-
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (integer)``
-    Selects the hierarchical coding layer. In normal encoding
-    (non-hierarchial coding), it should be zero. Possible values are [0, 6].
-    0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING
-    LAYER 1 and so on.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (integer)``
-    Indicates quantization parameter for hierarchical coding layer 0.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (integer)``
-    Indicates quantization parameter for hierarchical coding layer 1.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (integer)``
-    Indicates quantization parameter for hierarchical coding layer 2.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (integer)``
-    Indicates quantization parameter for hierarchical coding layer 3.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (integer)``
-    Indicates quantization parameter for hierarchical coding layer 4.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (integer)``
-    Indicates quantization parameter for hierarchical coding layer 5.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (integer)``
-    Indicates quantization parameter for hierarchical coding layer 6.
-    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
-
-.. _v4l2-hevc-profile:
-
-``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE``
-    (enum)
-
-enum v4l2_mpeg_video_hevc_profile -
-    Select the desired profile for HEVC encoder.
-
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN``
-      - Main profile.
-    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE``
-      - Main still picture profile.
-    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10``
-      - Main 10 profile.
-
-.. raw:: latex
-
-    \normalsize
-
-
-.. _v4l2-hevc-level:
-
-``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL``
-    (enum)
-
-enum v4l2_mpeg_video_hevc_level -
-    Selects the desired level for HEVC encoder.
-
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``
-      - Level 1.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``
-      - Level 2.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``
-      - Level 2.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``
-      - Level 3.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``
-      - Level 3.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``
-      - Level 4.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``
-      - Level 4.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``
-      - Level 5.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``
-      - Level 5.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``
-      - Level 5.2
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``
-      - Level 6.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``
-      - Level 6.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``
-      - Level 6.2
-
-.. raw:: latex
-
-    \normalsize
-
-
-``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)``
-    Indicates the number of evenly spaced subintervals, called ticks, within
-    one second. This is a 16 bit unsigned integer and has a maximum value up to
-    0xffff and a minimum value of 1.
-
-.. _v4l2-hevc-tier:
-
-``V4L2_CID_MPEG_VIDEO_HEVC_TIER``
-    (enum)
-
-enum v4l2_mpeg_video_hevc_tier -
-    TIER_FLAG specifies tiers information of the HEVC encoded picture. Tier
-    were made to deal with applications that differ in terms of maximum bit
-    rate. Setting the flag to 0 selects HEVC tier as Main tier and setting
-    this flag to 1 indicates High tier. High tier is for applications requiring
-    high bit rates.
-
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN``
-      - Main tier.
-    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH``
-      - High tier.
-
-.. raw:: latex
-
-    \normalsize
-
-
-``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)``
-    Selects HEVC maximum coding unit depth.
-
-.. _v4l2-hevc-loop-filter-mode:
-
-``V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE``
-    (enum)
-
-enum v4l2_mpeg_video_hevc_loop_filter_mode -
-    Loop filter mode for HEVC encoder. Possible values are:
-
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{12.1cm}|p{5.4cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED``
-      - Loop filter is disabled.
-    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED``
-      - Loop filter is enabled.
-    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY``
-      - Loop filter is disabled at the slice boundary.
-
-.. raw:: latex
-
-    \normalsize
-
-
-``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (integer)``
-    Selects HEVC loop filter beta offset. The valid range is [-6, +6].
-
-``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (integer)``
-    Selects HEVC loop filter tc offset. The valid range is [-6, +6].
-
-.. _v4l2-hevc-refresh-type:
-
-``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
-    (enum)
-
-enum v4l2_mpeg_video_hevc_hier_refresh_type -
-    Selects refresh type for HEVC encoder.
-    Host has to specify the period into
-    V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD.
-
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{8.0cm}|p{9.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE``
-      - Use the B frame for hierarchical coding.
-    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA``
-      - Use CRA (Clean Random Access Unit) picture encoding.
-    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR``
-      - Use IDR (Instantaneous Decoding Refresh) picture encoding.
-
-.. raw:: latex
-
-    \normalsize
-
-
-``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (integer)``
-    Selects the refresh period for HEVC encoder.
-    This specifies the number of I pictures between two CRA/IDR pictures.
-    This is valid only if REFRESH_TYPE is not 0.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (boolean)``
-    Indicates HEVC lossless encoding. Setting it to 0 disables lossless
-    encoding. Setting it to 1 enables lossless encoding.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (boolean)``
-    Indicates constant intra prediction for HEVC encoder. Specifies the
-    constrained intra prediction in which intra largest coding unit (LCU)
-    prediction is performed by using residual data and decoded samples of
-    neighboring intra LCU only. Setting the value to 1 enables constant intra
-    prediction and setting the value to 0 disables constant intra prediction.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (boolean)``
-    Indicates wavefront parallel processing for HEVC encoder. Setting it to 0
-    disables the feature and setting it to 1 enables the wavefront parallel
-    processing.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (boolean)``
-    Setting the value to 1 enables combination of P and B frame for HEVC
-    encoder.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (boolean)``
-    Indicates temporal identifier for HEVC encoder which is enabled by
-    setting the value to 1.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (boolean)``
-    Indicates bi-linear interpolation is conditionally used in the intra
-    prediction filtering process in the CVS when set to 1. Indicates bi-linear
-    interpolation is not used in the CVS when set to 0.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (integer)``
-    Indicates maximum number of merge candidate motion vectors.
-    Values are from 0 to 4.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (boolean)``
-    Indicates temporal motion vector prediction for HEVC encoder. Setting it to
-    1 enables the prediction. Setting it to 0 disables the prediction.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (boolean)``
-    Specifies if HEVC generates a stream with a size of the length field
-    instead of start code pattern. The size of the length field is configurable
-    through the V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control. Setting
-    the value to 0 disables encoding without startcode pattern. Setting the
-    value to 1 will enables encoding without startcode pattern.
-
-.. _v4l2-hevc-size-of-length-field:
-
-``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD``
-(enum)
-
-enum v4l2_mpeg_video_hevc_size_of_length_field -
-    Indicates the size of length field.
-    This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled.
-
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{6.0cm}|p{11.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0``
-      - Generate start code pattern (Normal).
-    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1``
-      - Generate size of length field instead of start code pattern and length is 1.
-    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2``
-      - Generate size of length field instead of start code pattern and length is 2.
-    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4``
-      - Generate size of length field instead of start code pattern and length is 4.
-
-.. raw:: latex
-
-    \normalsize
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (integer)``
-    Indicates bit rate for hierarchical coding layer 0 for HEVC encoder.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (integer)``
-    Indicates bit rate for hierarchical coding layer 1 for HEVC encoder.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (integer)``
-    Indicates bit rate for hierarchical coding layer 2 for HEVC encoder.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (integer)``
-    Indicates bit rate for hierarchical coding layer 3 for HEVC encoder.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (integer)``
-    Indicates bit rate for hierarchical coding layer 4 for HEVC encoder.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (integer)``
-    Indicates bit rate for hierarchical coding layer 5 for HEVC encoder.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (integer)``
-    Indicates bit rate for hierarchical coding layer 6 for HEVC encoder.
-
-``V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (integer)``
-    Selects number of P reference pictures required for HEVC encoder.
-    P-Frame can use 1 or 2 frames for reference.
-
-``V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (integer)``
-    Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
-    disables generating SPS and PPS at every IDR. Setting it to one enables
-    generating SPS and PPS at every IDR.
-
-.. _v4l2-mpeg-hevc:
-
-``V4L2_CID_MPEG_VIDEO_HEVC_SPS (struct)``
-    Specifies the Sequence Parameter Set fields (as extracted from the
-    bitstream) for the associated HEVC slice data.
-    These bitstream parameters are defined according to :ref:`hevc`.
-    They are described in section 7.4.3.2 "Sequence parameter set RBSP
-    semantics" of the specification.
-
-.. c:type:: v4l2_ctrl_hevc_sps
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_hevc_sps
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u16
-      - ``pic_width_in_luma_samples``
-      -
-    * - __u16
-      - ``pic_height_in_luma_samples``
-      -
-    * - __u8
-      - ``bit_depth_luma_minus8``
-      -
-    * - __u8
-      - ``bit_depth_chroma_minus8``
-      -
-    * - __u8
-      - ``log2_max_pic_order_cnt_lsb_minus4``
-      -
-    * - __u8
-      - ``sps_max_dec_pic_buffering_minus1``
-      -
-    * - __u8
-      - ``sps_max_num_reorder_pics``
-      -
-    * - __u8
-      - ``sps_max_latency_increase_plus1``
-      -
-    * - __u8
-      - ``log2_min_luma_coding_block_size_minus3``
-      -
-    * - __u8
-      - ``log2_diff_max_min_luma_coding_block_size``
-      -
-    * - __u8
-      - ``log2_min_luma_transform_block_size_minus2``
-      -
-    * - __u8
-      - ``log2_diff_max_min_luma_transform_block_size``
-      -
-    * - __u8
-      - ``max_transform_hierarchy_depth_inter``
-      -
-    * - __u8
-      - ``max_transform_hierarchy_depth_intra``
-      -
-    * - __u8
-      - ``pcm_sample_bit_depth_luma_minus1``
-      -
-    * - __u8
-      - ``pcm_sample_bit_depth_chroma_minus1``
-      -
-    * - __u8
-      - ``log2_min_pcm_luma_coding_block_size_minus3``
-      -
-    * - __u8
-      - ``log2_diff_max_min_pcm_luma_coding_block_size``
-      -
-    * - __u8
-      - ``num_short_term_ref_pic_sets``
-      -
-    * - __u8
-      - ``num_long_term_ref_pics_sps``
-      -
-    * - __u8
-      - ``chroma_format_idc``
-      -
-    * - __u64
-      - ``flags``
-      - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>`
-
-.. _hevc_sps_flags:
-
-``Sequence Parameter Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE``
-      - 0x00000001
-      -
-    * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED``
-      - 0x00000002
-      -
-    * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED``
-      - 0x00000004
-      -
-    * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET``
-      - 0x00000008
-      -
-    * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED``
-      - 0x00000010
-      -
-    * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED``
-      - 0x00000020
-      -
-    * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT``
-      - 0x00000040
-      -
-    * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED``
-      - 0x00000080
-      -
-    * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED``
-      - 0x00000100
-      -
-
-``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)``
-    Specifies the Picture Parameter Set fields (as extracted from the
-    bitstream) for the associated HEVC slice data.
-    These bitstream parameters are defined according to :ref:`hevc`.
-    They are described in section 7.4.3.3 "Picture parameter set RBSP
-    semantics" of the specification.
-
-.. c:type:: v4l2_ctrl_hevc_pps
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_hevc_pps
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``num_extra_slice_header_bits``
-      -
-    * - __s8
-      - ``init_qp_minus26``
-      -
-    * - __u8
-      - ``diff_cu_qp_delta_depth``
-      -
-    * - __s8
-      - ``pps_cb_qp_offset``
-      -
-    * - __s8
-      - ``pps_cr_qp_offset``
-      -
-    * - __u8
-      - ``num_tile_columns_minus1``
-      -
-    * - __u8
-      - ``num_tile_rows_minus1``
-      -
-    * - __u8
-      - ``column_width_minus1[20]``
-      -
-    * - __u8
-      - ``row_height_minus1[22]``
-      -
-    * - __s8
-      - ``pps_beta_offset_div2``
-      -
-    * - __s8
-      - ``pps_tc_offset_div2``
-      -
-    * - __u8
-      - ``log2_parallel_merge_level_minus2``
-      -
-    * - __u8
-      - ``padding[4]``
-      - Applications and drivers must set this to zero.
-    * - __u64
-      - ``flags``
-      - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>`
-
-.. _hevc_pps_flags:
-
-``Picture Parameter Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT``
-      - 0x00000001
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
-      - 0x00000002
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED``
-      - 0x00000004
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT``
-      - 0x00000008
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED``
-      - 0x00000010
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED``
-      - 0x00000020
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED``
-      - 0x00000040
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT``
-      - 0x00000080
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED``
-      - 0x00000100
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED``
-      - 0x00000200
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED``
-      - 0x00000400
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED``
-      - 0x00000800
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED``
-      - 0x00001000
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED``
-      - 0x00002000
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED``
-      - 0x00004000
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED``
-      - 0x00008000
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER``
-      - 0x00010000
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT``
-      - 0x00020000
-      -
-    * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT``
-      - 0x00040000
-      -
-
-``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)``
-    Specifies various slice-specific parameters, especially from the NAL unit
-    header, general slice segment header and weighted prediction parameter
-    parts of the bitstream.
-    These bitstream parameters are defined according to :ref:`hevc`.
-    They are described in section 7.4.7 "General slice segment header
-    semantics" of the specification.
-
-.. c:type:: v4l2_ctrl_hevc_slice_params
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_hevc_slice_params
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``bit_size``
-      - Size (in bits) of the current slice data.
-    * - __u32
-      - ``data_bit_offset``
-      - Offset (in bits) to the video data in the current slice data.
-    * - __u8
-      - ``nal_unit_type``
-      -
-    * - __u8
-      - ``nuh_temporal_id_plus1``
-      -
-    * - __u8
-      - ``slice_type``
-      -
-	(V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or
-	V4L2_HEVC_SLICE_TYPE_B).
-    * - __u8
-      - ``colour_plane_id``
-      -
-    * - __u16
-      - ``slice_pic_order_cnt``
-      -
-    * - __u8
-      - ``num_ref_idx_l0_active_minus1``
-      -
-    * - __u8
-      - ``num_ref_idx_l1_active_minus1``
-      -
-    * - __u8
-      - ``collocated_ref_idx``
-      -
-    * - __u8
-      - ``five_minus_max_num_merge_cand``
-      -
-    * - __s8
-      - ``slice_qp_delta``
-      -
-    * - __s8
-      - ``slice_cb_qp_offset``
-      -
-    * - __s8
-      - ``slice_cr_qp_offset``
-      -
-    * - __s8
-      - ``slice_act_y_qp_offset``
-      -
-    * - __s8
-      - ``slice_act_cb_qp_offset``
-      -
-    * - __s8
-      - ``slice_act_cr_qp_offset``
-      -
-    * - __s8
-      - ``slice_beta_offset_div2``
-      -
-    * - __s8
-      - ``slice_tc_offset_div2``
-      -
-    * - __u8
-      - ``pic_struct``
-      -
-    * - __u8
-      - ``num_active_dpb_entries``
-      - The number of entries in ``dpb``.
-    * - __u8
-      - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
-      - The list of L0 reference elements as indices in the DPB.
-    * - __u8
-      - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
-      - The list of L1 reference elements as indices in the DPB.
-    * - __u8
-      - ``num_rps_poc_st_curr_before``
-      - The number of reference pictures in the short-term set that come before
-        the current frame.
-    * - __u8
-      - ``num_rps_poc_st_curr_after``
-      - The number of reference pictures in the short-term set that come after
-        the current frame.
-    * - __u8
-      - ``num_rps_poc_lt_curr``
-      - The number of reference pictures in the long-term set.
-    * - __u8
-      - ``padding[7]``
-      - Applications and drivers must set this to zero.
-    * - struct :c:type:`v4l2_hevc_dpb_entry`
-      - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
-      - The decoded picture buffer, for meta-data about reference frames.
-    * - struct :c:type:`v4l2_hevc_pred_weight_table`
-      - ``pred_weight_table``
-      - The prediction weight coefficients for inter-picture prediction.
-    * - __u64
-      - ``flags``
-      - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>`
-
-.. _hevc_slice_params_flags:
-
-``Slice Parameters Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA``
-      - 0x00000001
-      -
-    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA``
-      - 0x00000002
-      -
-    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED``
-      - 0x00000004
-      -
-    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO``
-      - 0x00000008
-      -
-    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT``
-      - 0x00000010
-      -
-    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0``
-      - 0x00000020
-      -
-    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV``
-      - 0x00000040
-      -
-    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED``
-      - 0x00000080
-      -
-    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
-      - 0x00000100
-      -
-
-.. c:type:: v4l2_hevc_dpb_entry
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_hevc_dpb_entry
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u64
-      - ``timestamp``
-      - Timestamp of the V4L2 capture buffer to use as reference, used
-        with B-coded and P-coded frames. The timestamp refers to the
-	``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
-	:c:func:`v4l2_timeval_to_ns()` function to convert the struct
-	:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
-    * - __u8
-      - ``rps``
-      - The reference set for the reference frame
-        (V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_BEFORE,
-        V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_AFTER or
-        V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR)
-    * - __u8
-      - ``field_pic``
-      - Whether the reference is a field picture or a frame.
-    * - __u16
-      - ``pic_order_cnt[2]``
-      - The picture order count of the reference. Only the first element of the
-        array is used for frame pictures, while the first element identifies the
-        top field and the second the bottom field in field-coded pictures.
-    * - __u8
-      - ``padding[2]``
-      - Applications and drivers must set this to zero.
-
-.. c:type:: v4l2_hevc_pred_weight_table
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_hevc_pred_weight_table
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``luma_log2_weight_denom``
-      -
-    * - __s8
-      - ``delta_chroma_log2_weight_denom``
-      -
-    * - __s8
-      - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
-      -
-    * - __s8
-      - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
-      -
-    * - __s8
-      - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
-      -
-    * - __s8
-      - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
-      -
-    * - __s8
-      - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
-      -
-    * - __s8
-      - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
-      -
-    * - __s8
-      - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
-      -
-    * - __s8
-      - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
-      -
-    * - __u8
-      - ``padding[6]``
-      - Applications and drivers must set this to zero.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)``
-    Specifies the decoding mode to use. Currently exposes slice-based and
-    frame-based decoding but new modes might be added later on.
-    This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
-    pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
-    are required to set this control in order to specify the decoding mode
-    that is expected for the buffer.
-    Drivers may expose a single or multiple decoding modes, depending
-    on what they can support.
-
-    .. note::
-
-       This menu control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_mpeg_video_hevc_decode_mode
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED``
-      - 0
-      - Decoding is done at the slice granularity.
-        The OUTPUT buffer must contain a single slice.
-    * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED``
-      - 1
-      - Decoding is done at the frame granularity.
-        The OUTPUT buffer must contain all slices needed to decode the
-        frame. The OUTPUT buffer must also contain both fields.
-
-``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)``
-    Specifies the HEVC slice start code expected for each slice.
-    This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
-    pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
-    are required to set this control in order to specify the start code
-    that is expected for the buffer.
-    Drivers may expose a single or multiple start codes, depending
-    on what they can support.
-
-    .. note::
-
-       This menu control is not yet part of the public kernel API and
-       it is expected to change.
-
-.. c:type:: v4l2_mpeg_video_hevc_start_code
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE``
-      - 0
-      - Selecting this value specifies that HEVC slices are passed
-        to the driver without any start code.
-    * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B``
-      - 1
-      - Selecting this value specifies that HEVC slices are expected
-        to be prefixed by Annex B start codes. According to :ref:`hevc`
-        valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-detect.rst b/Documentation/media/uapi/v4l/ext-ctrls-detect.rst
deleted file mode 100644
index 80981d0cff42..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-detect.rst
+++ /dev/null
@@ -1,71 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _detect-controls:
-
-************************
-Detect Control Reference
-************************
-
-The Detect class includes controls for common features of various motion
-or object detection capable devices.
-
-
-.. _detect-control-id:
-
-Detect Control IDs
-==================
-
-``V4L2_CID_DETECT_CLASS (class)``
-    The Detect class descriptor. Calling
-    :ref:`VIDIOC_QUERYCTRL` for this control will
-    return a description of this control class.
-
-``V4L2_CID_DETECT_MD_MODE (menu)``
-    Sets the motion detection mode.
-
-.. tabularcolumns:: |p{7.7cm}|p{9.8cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_DETECT_MD_MODE_DISABLED``
-      - Disable motion detection.
-    * - ``V4L2_DETECT_MD_MODE_GLOBAL``
-      - Use a single motion detection threshold.
-    * - ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID``
-      - The image is divided into a grid, each cell with its own motion
-	detection threshold. These thresholds are set through the
-	``V4L2_CID_DETECT_MD_THRESHOLD_GRID`` matrix control.
-    * - ``V4L2_DETECT_MD_MODE_REGION_GRID``
-      - The image is divided into a grid, each cell with its own region
-	value that specifies which per-region motion detection thresholds
-	should be used. Each region has its own thresholds. How these
-	per-region thresholds are set up is driver-specific. The region
-	values for the grid are set through the
-	``V4L2_CID_DETECT_MD_REGION_GRID`` matrix control.
-
-
-
-``V4L2_CID_DETECT_MD_GLOBAL_THRESHOLD (integer)``
-    Sets the global motion detection threshold to be used with the
-    ``V4L2_DETECT_MD_MODE_GLOBAL`` motion detection mode.
-
-``V4L2_CID_DETECT_MD_THRESHOLD_GRID (__u16 matrix)``
-    Sets the motion detection thresholds for each cell in the grid. To
-    be used with the ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID`` motion
-    detection mode. Matrix element (0, 0) represents the cell at the
-    top-left of the grid.
-
-``V4L2_CID_DETECT_MD_REGION_GRID (__u8 matrix)``
-    Sets the motion detection region value for each cell in the grid. To
-    be used with the ``V4L2_DETECT_MD_MODE_REGION_GRID`` motion
-    detection mode. Matrix element (0, 0) represents the cell at the
-    top-left of the grid.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-dv.rst b/Documentation/media/uapi/v4l/ext-ctrls-dv.rst
deleted file mode 100644
index 5c70ac98f710..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-dv.rst
+++ /dev/null
@@ -1,166 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _dv-controls:
-
-*******************************
-Digital Video Control Reference
-*******************************
-
-The Digital Video control class is intended to control receivers and
-transmitters for `VGA <http://en.wikipedia.org/wiki/Vga>`__,
-`DVI <http://en.wikipedia.org/wiki/Digital_Visual_Interface>`__
-(Digital Visual Interface), HDMI (:ref:`hdmi`) and DisplayPort
-(:ref:`dp`). These controls are generally expected to be private to
-the receiver or transmitter subdevice that implements them, so they are
-only exposed on the ``/dev/v4l-subdev*`` device node.
-
-.. note::
-
-   Note that these devices can have multiple input or output pads which are
-   hooked up to e.g. HDMI connectors. Even though the subdevice will
-   receive or transmit video from/to only one of those pads, the other pads
-   can still be active when it comes to EDID (Extended Display
-   Identification Data, :ref:`vesaedid`) and HDCP (High-bandwidth Digital
-   Content Protection System, :ref:`hdcp`) processing, allowing the
-   device to do the fairly slow EDID/HDCP handling in advance. This allows
-   for quick switching between connectors.
-
-These pads appear in several of the controls in this section as
-bitmasks, one bit for each pad. Bit 0 corresponds to pad 0, bit 1 to pad
-1, etc. The maximum value of the control is the set of valid pads.
-
-
-.. _dv-control-id:
-
-Digital Video Control IDs
-=========================
-
-``V4L2_CID_DV_CLASS (class)``
-    The Digital Video class descriptor.
-
-``V4L2_CID_DV_TX_HOTPLUG (bitmask)``
-    Many connectors have a hotplug pin which is high if EDID information
-    is available from the source. This control shows the state of the
-    hotplug pin as seen by the transmitter. Each bit corresponds to an
-    output pad on the transmitter. If an output pad does not have an
-    associated hotplug pin, then the bit for that pad will be 0. This
-    read-only control is applicable to DVI-D, HDMI and DisplayPort
-    connectors.
-
-``V4L2_CID_DV_TX_RXSENSE (bitmask)``
-    Rx Sense is the detection of pull-ups on the TMDS clock lines. This
-    normally means that the sink has left/entered standby (i.e. the
-    transmitter can sense that the receiver is ready to receive video).
-    Each bit corresponds to an output pad on the transmitter. If an
-    output pad does not have an associated Rx Sense, then the bit for
-    that pad will be 0. This read-only control is applicable to DVI-D
-    and HDMI devices.
-
-``V4L2_CID_DV_TX_EDID_PRESENT (bitmask)``
-    When the transmitter sees the hotplug signal from the receiver it
-    will attempt to read the EDID. If set, then the transmitter has read
-    at least the first block (= 128 bytes). Each bit corresponds to an
-    output pad on the transmitter. If an output pad does not support
-    EDIDs, then the bit for that pad will be 0. This read-only control
-    is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors.
-
-``V4L2_CID_DV_TX_MODE``
-    (enum)
-
-enum v4l2_dv_tx_mode -
-    HDMI transmitters can transmit in DVI-D mode (just video) or in HDMI
-    mode (video + audio + auxiliary data). This control selects which
-    mode to use: V4L2_DV_TX_MODE_DVI_D or V4L2_DV_TX_MODE_HDMI.
-    This control is applicable to HDMI connectors.
-
-``V4L2_CID_DV_TX_RGB_RANGE``
-    (enum)
-
-enum v4l2_dv_rgb_range -
-    Select the quantization range for RGB output. V4L2_DV_RANGE_AUTO
-    follows the RGB quantization range specified in the standard for the
-    video interface (ie. :ref:`cea861` for HDMI).
-    V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the
-    standard to be compatible with sinks that have not implemented the
-    standard correctly (unfortunately quite common for HDMI and DVI-D).
-    Full range allows all possible values to be used whereas limited
-    range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is
-    the number of bits per component. This control is applicable to VGA,
-    DVI-A/D, HDMI and DisplayPort connectors.
-
-``V4L2_CID_DV_TX_IT_CONTENT_TYPE``
-    (enum)
-
-enum v4l2_dv_it_content_type -
-    Configures the IT Content Type of the transmitted video. This
-    information is sent over HDMI and DisplayPort connectors as part of
-    the AVI InfoFrame. The term 'IT Content' is used for content that
-    originates from a computer as opposed to content from a TV broadcast
-    or an analog source. The enum v4l2_dv_it_content_type defines
-    the possible content types:
-
-.. tabularcolumns:: |p{7.3cm}|p{10.4cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_DV_IT_CONTENT_TYPE_GRAPHICS``
-      - Graphics content. Pixel data should be passed unfiltered and
-	without analog reconstruction.
-    * - ``V4L2_DV_IT_CONTENT_TYPE_PHOTO``
-      - Photo content. The content is derived from digital still pictures.
-	The content should be passed through with minimal scaling and
-	picture enhancements.
-    * - ``V4L2_DV_IT_CONTENT_TYPE_CINEMA``
-      - Cinema content.
-    * - ``V4L2_DV_IT_CONTENT_TYPE_GAME``
-      - Game content. Audio and video latency should be minimized.
-    * - ``V4L2_DV_IT_CONTENT_TYPE_NO_ITC``
-      - No IT Content information is available and the ITC bit in the AVI
-	InfoFrame is set to 0.
-
-
-
-``V4L2_CID_DV_RX_POWER_PRESENT (bitmask)``
-    Detects whether the receiver receives power from the source (e.g.
-    HDMI carries 5V on one of the pins). This is often used to power an
-    eeprom which contains EDID information, such that the source can
-    read the EDID even if the sink is in standby/power off. Each bit
-    corresponds to an input pad on the receiver. If an input pad
-    cannot detect whether power is present, then the bit for that pad
-    will be 0. This read-only control is applicable to DVI-D, HDMI and
-    DisplayPort connectors.
-
-``V4L2_CID_DV_RX_RGB_RANGE``
-    (enum)
-
-enum v4l2_dv_rgb_range -
-    Select the quantization range for RGB input. V4L2_DV_RANGE_AUTO
-    follows the RGB quantization range specified in the standard for the
-    video interface (ie. :ref:`cea861` for HDMI).
-    V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the
-    standard to be compatible with sources that have not implemented the
-    standard correctly (unfortunately quite common for HDMI and DVI-D).
-    Full range allows all possible values to be used whereas limited
-    range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is
-    the number of bits per component. This control is applicable to VGA,
-    DVI-A/D, HDMI and DisplayPort connectors.
-
-``V4L2_CID_DV_RX_IT_CONTENT_TYPE``
-    (enum)
-
-enum v4l2_dv_it_content_type -
-    Reads the IT Content Type of the received video. This information is
-    sent over HDMI and DisplayPort connectors as part of the AVI
-    InfoFrame. The term 'IT Content' is used for content that originates
-    from a computer as opposed to content from a TV broadcast or an
-    analog source. See ``V4L2_CID_DV_TX_IT_CONTENT_TYPE`` for the
-    available content types.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-flash.rst b/Documentation/media/uapi/v4l/ext-ctrls-flash.rst
deleted file mode 100644
index b9a6b08fbf32..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-flash.rst
+++ /dev/null
@@ -1,192 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _flash-controls:
-
-***********************
-Flash Control Reference
-***********************
-
-The V4L2 flash controls are intended to provide generic access to flash
-controller devices. Flash controller devices are typically used in
-digital cameras.
-
-The interface can support both LED and xenon flash devices. As of
-writing this, there is no xenon flash driver using this interface.
-
-
-.. _flash-controls-use-cases:
-
-Supported use cases
-===================
-
-
-Unsynchronised LED flash (software strobe)
-------------------------------------------
-
-Unsynchronised LED flash is controlled directly by the host as the
-sensor. The flash must be enabled by the host before the exposure of the
-image starts and disabled once it ends. The host is fully responsible
-for the timing of the flash.
-
-Example of such device: Nokia N900.
-
-
-Synchronised LED flash (hardware strobe)
-----------------------------------------
-
-The synchronised LED flash is pre-programmed by the host (power and
-timeout) but controlled by the sensor through a strobe signal from the
-sensor to the flash.
-
-The sensor controls the flash duration and timing. This information
-typically must be made available to the sensor.
-
-
-LED flash as torch
-------------------
-
-LED flash may be used as torch in conjunction with another use case
-involving camera or individually.
-
-
-.. _flash-control-id:
-
-Flash Control IDs
------------------
-
-``V4L2_CID_FLASH_CLASS (class)``
-    The FLASH class descriptor.
-
-``V4L2_CID_FLASH_LED_MODE (menu)``
-    Defines the mode of the flash LED, the high-power white LED attached
-    to the flash controller. Setting this control may not be possible in
-    presence of some faults. See V4L2_CID_FLASH_FAULT.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_FLASH_LED_MODE_NONE``
-      - Off.
-    * - ``V4L2_FLASH_LED_MODE_FLASH``
-      - Flash mode.
-    * - ``V4L2_FLASH_LED_MODE_TORCH``
-      - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.
-
-
-
-``V4L2_CID_FLASH_STROBE_SOURCE (menu)``
-    Defines the source of the flash LED strobe.
-
-.. tabularcolumns:: |p{7.5cm}|p{10.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_FLASH_STROBE_SOURCE_SOFTWARE``
-      - The flash strobe is triggered by using the
-	V4L2_CID_FLASH_STROBE control.
-    * - ``V4L2_FLASH_STROBE_SOURCE_EXTERNAL``
-      - The flash strobe is triggered by an external source. Typically
-	this is a sensor, which makes it possible to synchronise the
-	flash strobe start to exposure start.
-
-
-
-``V4L2_CID_FLASH_STROBE (button)``
-    Strobe flash. Valid when V4L2_CID_FLASH_LED_MODE is set to
-    V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE
-    is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this
-    control may not be possible in presence of some faults. See
-    V4L2_CID_FLASH_FAULT.
-
-``V4L2_CID_FLASH_STROBE_STOP (button)``
-    Stop flash strobe immediately.
-
-``V4L2_CID_FLASH_STROBE_STATUS (boolean)``
-    Strobe status: whether the flash is strobing at the moment or not.
-    This is a read-only control.
-
-``V4L2_CID_FLASH_TIMEOUT (integer)``
-    Hardware timeout for flash. The flash strobe is stopped after this
-    period of time has passed from the start of the strobe.
-
-``V4L2_CID_FLASH_INTENSITY (integer)``
-    Intensity of the flash strobe when the flash LED is in flash mode
-    (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps (mA)
-    if possible.
-
-``V4L2_CID_FLASH_TORCH_INTENSITY (integer)``
-    Intensity of the flash LED in torch mode
-    (V4L2_FLASH_LED_MODE_TORCH). The unit should be milliamps (mA)
-    if possible. Setting this control may not be possible in presence of
-    some faults. See V4L2_CID_FLASH_FAULT.
-
-``V4L2_CID_FLASH_INDICATOR_INTENSITY (integer)``
-    Intensity of the indicator LED. The indicator LED may be fully
-    independent of the flash LED. The unit should be microamps (uA) if
-    possible.
-
-``V4L2_CID_FLASH_FAULT (bitmask)``
-    Faults related to the flash. The faults tell about specific problems
-    in the flash chip itself or the LEDs attached to it. Faults may
-    prevent further use of some of the flash controls. In particular,
-    V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE
-    if the fault affects the flash LED. Exactly which faults have such
-    an effect is chip dependent. Reading the faults resets the control
-    and returns the chip to a usable state if possible.
-
-.. tabularcolumns:: |p{8.4cm}|p{9.1cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_FLASH_FAULT_OVER_VOLTAGE``
-      - Flash controller voltage to the flash LED has exceeded the limit
-	specific to the flash controller.
-    * - ``V4L2_FLASH_FAULT_TIMEOUT``
-      - The flash strobe was still on when the timeout set by the user ---
-	V4L2_CID_FLASH_TIMEOUT control --- has expired. Not all flash
-	controllers may set this in all such conditions.
-    * - ``V4L2_FLASH_FAULT_OVER_TEMPERATURE``
-      - The flash controller has overheated.
-    * - ``V4L2_FLASH_FAULT_SHORT_CIRCUIT``
-      - The short circuit protection of the flash controller has been
-	triggered.
-    * - ``V4L2_FLASH_FAULT_OVER_CURRENT``
-      - Current in the LED power supply has exceeded the limit specific to
-	the flash controller.
-    * - ``V4L2_FLASH_FAULT_INDICATOR``
-      - The flash controller has detected a short or open circuit
-	condition on the indicator LED.
-    * - ``V4L2_FLASH_FAULT_UNDER_VOLTAGE``
-      - Flash controller voltage to the flash LED has been below the
-	minimum limit specific to the flash controller.
-    * - ``V4L2_FLASH_FAULT_INPUT_VOLTAGE``
-      - The input voltage of the flash controller is below the limit under
-	which strobing the flash at full current will not be possible.The
-	condition persists until this flag is no longer set.
-    * - ``V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE``
-      - The temperature of the LED has exceeded its allowed upper limit.
-
-
-
-``V4L2_CID_FLASH_CHARGE (boolean)``
-    Enable or disable charging of the xenon flash capacitor.
-
-``V4L2_CID_FLASH_READY (boolean)``
-    Is the flash ready to strobe? Xenon flashes require their capacitors
-    charged before strobing. LED flashes often require a cooldown period
-    after strobe during which another strobe will not be possible. This
-    is a read-only control.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-fm-rx.rst b/Documentation/media/uapi/v4l/ext-ctrls-fm-rx.rst
deleted file mode 100644
index 3ed6dd7f586d..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-fm-rx.rst
+++ /dev/null
@@ -1,95 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _fm-rx-controls:
-
-*****************************
-FM Receiver Control Reference
-*****************************
-
-The FM Receiver (FM_RX) class includes controls for common features of
-FM Reception capable devices.
-
-
-.. _fm-rx-control-id:
-
-FM_RX Control IDs
-=================
-
-``V4L2_CID_FM_RX_CLASS (class)``
-    The FM_RX class descriptor. Calling
-    :ref:`VIDIOC_QUERYCTRL` for this control will
-    return a description of this control class.
-
-``V4L2_CID_RDS_RECEPTION (boolean)``
-    Enables/disables RDS reception by the radio tuner
-
-``V4L2_CID_RDS_RX_PTY (integer)``
-    Gets RDS Programme Type field. This encodes up to 31 pre-defined
-    programme types.
-
-``V4L2_CID_RDS_RX_PS_NAME (string)``
-    Gets the Programme Service name (PS_NAME). It is intended for
-    static display on a receiver. It is the primary aid to listeners in
-    programme service identification and selection. In Annex E of
-    :ref:`iec62106`, the RDS specification, there is a full
-    description of the correct character encoding for Programme Service
-    name strings. Also from RDS specification, PS is usually a single
-    eight character text. However, it is also possible to find receivers
-    which can scroll strings sized as 8 x N characters. So, this control
-    must be configured with steps of 8 characters. The result is it must
-    always contain a string with size multiple of 8.
-
-``V4L2_CID_RDS_RX_RADIO_TEXT (string)``
-    Gets the Radio Text info. It is a textual description of what is
-    being broadcasted. RDS Radio Text can be applied when broadcaster
-    wishes to transmit longer PS names, programme-related information or
-    any other text. In these cases, RadioText can be used in addition to
-    ``V4L2_CID_RDS_RX_PS_NAME``. The encoding for Radio Text strings is
-    also fully described in Annex E of :ref:`iec62106`. The length of
-    Radio Text strings depends on which RDS Block is being used to
-    transmit it, either 32 (2A block) or 64 (2B block). However, it is
-    also possible to find receivers which can scroll strings sized as 32
-    x N or 64 x N characters. So, this control must be configured with
-    steps of 32 or 64 characters. The result is it must always contain a
-    string with size multiple of 32 or 64.
-
-``V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT (boolean)``
-    If set, then a traffic announcement is in progress.
-
-``V4L2_CID_RDS_RX_TRAFFIC_PROGRAM (boolean)``
-    If set, then the tuned programme carries traffic announcements.
-
-``V4L2_CID_RDS_RX_MUSIC_SPEECH (boolean)``
-    If set, then this channel broadcasts music. If cleared, then it
-    broadcasts speech. If the transmitter doesn't make this distinction,
-    then it will be set.
-
-``V4L2_CID_TUNE_DEEMPHASIS``
-    (enum)
-
-enum v4l2_deemphasis -
-    Configures the de-emphasis value for reception. A de-emphasis filter
-    is applied to the broadcast to accentuate the high audio
-    frequencies. Depending on the region, a time constant of either 50
-    or 75 useconds is used. The enum v4l2_deemphasis defines possible
-    values for de-emphasis. Here they are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_DEEMPHASIS_DISABLED``
-      - No de-emphasis is applied.
-    * - ``V4L2_DEEMPHASIS_50_uS``
-      - A de-emphasis of 50 uS is used.
-    * - ``V4L2_DEEMPHASIS_75_uS``
-      - A de-emphasis of 75 uS is used.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-fm-tx.rst b/Documentation/media/uapi/v4l/ext-ctrls-fm-tx.rst
deleted file mode 100644
index db88346d99fd..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-fm-tx.rst
+++ /dev/null
@@ -1,188 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _fm-tx-controls:
-
-********************************
-FM Transmitter Control Reference
-********************************
-
-The FM Transmitter (FM_TX) class includes controls for common features
-of FM transmissions capable devices. Currently this class includes
-parameters for audio compression, pilot tone generation, audio deviation
-limiter, RDS transmission and tuning power features.
-
-
-.. _fm-tx-control-id:
-
-FM_TX Control IDs
-=================
-
-``V4L2_CID_FM_TX_CLASS (class)``
-    The FM_TX class descriptor. Calling
-    :ref:`VIDIOC_QUERYCTRL` for this control will
-    return a description of this control class.
-
-``V4L2_CID_RDS_TX_DEVIATION (integer)``
-    Configures RDS signal frequency deviation level in Hz. The range and
-    step are driver-specific.
-
-``V4L2_CID_RDS_TX_PI (integer)``
-    Sets the RDS Programme Identification field for transmission.
-
-``V4L2_CID_RDS_TX_PTY (integer)``
-    Sets the RDS Programme Type field for transmission. This encodes up
-    to 31 pre-defined programme types.
-
-``V4L2_CID_RDS_TX_PS_NAME (string)``
-    Sets the Programme Service name (PS_NAME) for transmission. It is
-    intended for static display on a receiver. It is the primary aid to
-    listeners in programme service identification and selection. In
-    Annex E of :ref:`iec62106`, the RDS specification, there is a full
-    description of the correct character encoding for Programme Service
-    name strings. Also from RDS specification, PS is usually a single
-    eight character text. However, it is also possible to find receivers
-    which can scroll strings sized as 8 x N characters. So, this control
-    must be configured with steps of 8 characters. The result is it must
-    always contain a string with size multiple of 8.
-
-``V4L2_CID_RDS_TX_RADIO_TEXT (string)``
-    Sets the Radio Text info for transmission. It is a textual
-    description of what is being broadcasted. RDS Radio Text can be
-    applied when broadcaster wishes to transmit longer PS names,
-    programme-related information or any other text. In these cases,
-    RadioText should be used in addition to ``V4L2_CID_RDS_TX_PS_NAME``.
-    The encoding for Radio Text strings is also fully described in Annex
-    E of :ref:`iec62106`. The length of Radio Text strings depends on
-    which RDS Block is being used to transmit it, either 32 (2A block)
-    or 64 (2B block). However, it is also possible to find receivers
-    which can scroll strings sized as 32 x N or 64 x N characters. So,
-    this control must be configured with steps of 32 or 64 characters.
-    The result is it must always contain a string with size multiple of
-    32 or 64.
-
-``V4L2_CID_RDS_TX_MONO_STEREO (boolean)``
-    Sets the Mono/Stereo bit of the Decoder Identification code. If set,
-    then the audio was recorded as stereo.
-
-``V4L2_CID_RDS_TX_ARTIFICIAL_HEAD (boolean)``
-    Sets the
-    `Artificial Head <http://en.wikipedia.org/wiki/Artificial_head>`__
-    bit of the Decoder Identification code. If set, then the audio was
-    recorded using an artificial head.
-
-``V4L2_CID_RDS_TX_COMPRESSED (boolean)``
-    Sets the Compressed bit of the Decoder Identification code. If set,
-    then the audio is compressed.
-
-``V4L2_CID_RDS_TX_DYNAMIC_PTY (boolean)``
-    Sets the Dynamic PTY bit of the Decoder Identification code. If set,
-    then the PTY code is dynamically switched.
-
-``V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT (boolean)``
-    If set, then a traffic announcement is in progress.
-
-``V4L2_CID_RDS_TX_TRAFFIC_PROGRAM (boolean)``
-    If set, then the tuned programme carries traffic announcements.
-
-``V4L2_CID_RDS_TX_MUSIC_SPEECH (boolean)``
-    If set, then this channel broadcasts music. If cleared, then it
-    broadcasts speech. If the transmitter doesn't make this distinction,
-    then it should be set.
-
-``V4L2_CID_RDS_TX_ALT_FREQS_ENABLE (boolean)``
-    If set, then transmit alternate frequencies.
-
-``V4L2_CID_RDS_TX_ALT_FREQS (__u32 array)``
-    The alternate frequencies in kHz units. The RDS standard allows for
-    up to 25 frequencies to be defined. Drivers may support fewer
-    frequencies so check the array size.
-
-``V4L2_CID_AUDIO_LIMITER_ENABLED (boolean)``
-    Enables or disables the audio deviation limiter feature. The limiter
-    is useful when trying to maximize the audio volume, minimize
-    receiver-generated distortion and prevent overmodulation.
-
-``V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (integer)``
-    Sets the audio deviation limiter feature release time. Unit is in
-    useconds. Step and range are driver-specific.
-
-``V4L2_CID_AUDIO_LIMITER_DEVIATION (integer)``
-    Configures audio frequency deviation level in Hz. The range and step
-    are driver-specific.
-
-``V4L2_CID_AUDIO_COMPRESSION_ENABLED (boolean)``
-    Enables or disables the audio compression feature. This feature
-    amplifies signals below the threshold by a fixed gain and compresses
-    audio signals above the threshold by the ratio of Threshold/(Gain +
-    Threshold).
-
-``V4L2_CID_AUDIO_COMPRESSION_GAIN (integer)``
-    Sets the gain for audio compression feature. It is a dB value. The
-    range and step are driver-specific.
-
-``V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (integer)``
-    Sets the threshold level for audio compression freature. It is a dB
-    value. The range and step are driver-specific.
-
-``V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (integer)``
-    Sets the attack time for audio compression feature. It is a useconds
-    value. The range and step are driver-specific.
-
-``V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (integer)``
-    Sets the release time for audio compression feature. It is a
-    useconds value. The range and step are driver-specific.
-
-``V4L2_CID_PILOT_TONE_ENABLED (boolean)``
-    Enables or disables the pilot tone generation feature.
-
-``V4L2_CID_PILOT_TONE_DEVIATION (integer)``
-    Configures pilot tone frequency deviation level. Unit is in Hz. The
-    range and step are driver-specific.
-
-``V4L2_CID_PILOT_TONE_FREQUENCY (integer)``
-    Configures pilot tone frequency value. Unit is in Hz. The range and
-    step are driver-specific.
-
-``V4L2_CID_TUNE_PREEMPHASIS``
-    (enum)
-
-enum v4l2_preemphasis -
-    Configures the pre-emphasis value for broadcasting. A pre-emphasis
-    filter is applied to the broadcast to accentuate the high audio
-    frequencies. Depending on the region, a time constant of either 50
-    or 75 useconds is used. The enum v4l2_preemphasis defines possible
-    values for pre-emphasis. Here they are:
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_PREEMPHASIS_DISABLED``
-      - No pre-emphasis is applied.
-    * - ``V4L2_PREEMPHASIS_50_uS``
-      - A pre-emphasis of 50 uS is used.
-    * - ``V4L2_PREEMPHASIS_75_uS``
-      - A pre-emphasis of 75 uS is used.
-
-
-
-``V4L2_CID_TUNE_POWER_LEVEL (integer)``
-    Sets the output power level for signal transmission. Unit is in
-    dBuV. Range and step are driver-specific.
-
-``V4L2_CID_TUNE_ANTENNA_CAPACITOR (integer)``
-    This selects the value of antenna tuning capacitor manually or
-    automatically if set to zero. Unit, range and step are
-    driver-specific.
-
-For more details about RDS specification, refer to :ref:`iec62106`
-document, from CENELEC.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-image-process.rst b/Documentation/media/uapi/v4l/ext-ctrls-image-process.rst
deleted file mode 100644
index 22fc2d3e433d..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-image-process.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _image-process-controls:
-
-*******************************
-Image Process Control Reference
-*******************************
-
-The Image Process control class is intended for low-level control of
-image processing functions. Unlike ``V4L2_CID_IMAGE_SOURCE_CLASS``, the
-controls in this class affect processing the image, and do not control
-capturing of it.
-
-
-.. _image-process-control-id:
-
-Image Process Control IDs
-=========================
-
-``V4L2_CID_IMAGE_PROC_CLASS (class)``
-    The IMAGE_PROC class descriptor.
-
-``V4L2_CID_LINK_FREQ (integer menu)``
-    Data bus frequency. Together with the media bus pixel code, bus type
-    (clock cycles per sample), the data bus frequency defines the pixel
-    rate (``V4L2_CID_PIXEL_RATE``) in the pixel array (or possibly
-    elsewhere, if the device is not an image sensor). The frame rate can
-    be calculated from the pixel clock, image width and height and
-    horizontal and vertical blanking. While the pixel rate control may
-    be defined elsewhere than in the subdev containing the pixel array,
-    the frame rate cannot be obtained from that information. This is
-    because only on the pixel array it can be assumed that the vertical
-    and horizontal blanking information is exact: no other blanking is
-    allowed in the pixel array. The selection of frame rate is performed
-    by selecting the desired horizontal and vertical blanking. The unit
-    of this control is Hz.
-
-``V4L2_CID_PIXEL_RATE (64-bit integer)``
-    Pixel rate in the source pads of the subdev. This control is
-    read-only and its unit is pixels / second.
-
-``V4L2_CID_TEST_PATTERN (menu)``
-    Some capture/display/sensor devices have the capability to generate
-    test pattern images. These hardware specific test patterns can be
-    used to test if a device is working properly.
-
-``V4L2_CID_DEINTERLACING_MODE (menu)``
-    The video deinterlacing mode (such as Bob, Weave, ...). The menu items are
-    driver specific and are documented in :ref:`v4l-drivers`.
-
-``V4L2_CID_DIGITAL_GAIN (integer)``
-    Digital gain is the value by which all colour components
-    are multiplied by. Typically the digital gain applied is the
-    control value divided by e.g. 0x100, meaning that to get no
-    digital gain the control value needs to be 0x100. The no-gain
-    configuration is also typically the default.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-image-source.rst b/Documentation/media/uapi/v4l/ext-ctrls-image-source.rst
deleted file mode 100644
index 2d3e2b83d6dd..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-image-source.rst
+++ /dev/null
@@ -1,67 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _image-source-controls:
-
-******************************
-Image Source Control Reference
-******************************
-
-The Image Source control class is intended for low-level control of
-image source devices such as image sensors. The devices feature an
-analogue to digital converter and a bus transmitter to transmit the
-image data out of the device.
-
-
-.. _image-source-control-id:
-
-Image Source Control IDs
-========================
-
-``V4L2_CID_IMAGE_SOURCE_CLASS (class)``
-    The IMAGE_SOURCE class descriptor.
-
-``V4L2_CID_VBLANK (integer)``
-    Vertical blanking. The idle period after every frame during which no
-    image data is produced. The unit of vertical blanking is a line.
-    Every line has length of the image width plus horizontal blanking at
-    the pixel rate defined by ``V4L2_CID_PIXEL_RATE`` control in the
-    same sub-device.
-
-``V4L2_CID_HBLANK (integer)``
-    Horizontal blanking. The idle period after every line of image data
-    during which no image data is produced. The unit of horizontal
-    blanking is pixels.
-
-``V4L2_CID_ANALOGUE_GAIN (integer)``
-    Analogue gain is gain affecting all colour components in the pixel
-    matrix. The gain operation is performed in the analogue domain
-    before A/D conversion.
-
-``V4L2_CID_TEST_PATTERN_RED (integer)``
-    Test pattern red colour component.
-
-``V4L2_CID_TEST_PATTERN_GREENR (integer)``
-    Test pattern green (next to red) colour component.
-
-``V4L2_CID_TEST_PATTERN_BLUE (integer)``
-    Test pattern blue colour component.
-
-``V4L2_CID_TEST_PATTERN_GREENB (integer)``
-    Test pattern green (next to blue) colour component.
-
-``V4L2_CID_UNIT_CELL_SIZE (struct)``
-    This control returns the unit cell size in nanometers. The struct
-    :c:type:`v4l2_area` provides the width and the height in separate
-    fields to take into consideration asymmetric pixels.
-    This control does not take into consideration any possible hardware
-    binning.
-    The unit cell consists of the whole area of the pixel, sensitive and
-    non-sensitive.
-    This control is required for automatic calibration of sensors/cameras.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-jpeg.rst b/Documentation/media/uapi/v4l/ext-ctrls-jpeg.rst
deleted file mode 100644
index 60ce3f949319..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-jpeg.rst
+++ /dev/null
@@ -1,113 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _jpeg-controls:
-
-**********************
-JPEG Control Reference
-**********************
-
-The JPEG class includes controls for common features of JPEG encoders
-and decoders. Currently it includes features for codecs implementing
-progressive baseline DCT compression process with Huffman entrophy
-coding.
-
-
-.. _jpeg-control-id:
-
-JPEG Control IDs
-================
-
-``V4L2_CID_JPEG_CLASS (class)``
-    The JPEG class descriptor. Calling
-    :ref:`VIDIOC_QUERYCTRL` for this control will
-    return a description of this control class.
-
-``V4L2_CID_JPEG_CHROMA_SUBSAMPLING (menu)``
-    The chroma subsampling factors describe how each component of an
-    input image is sampled, in respect to maximum sample rate in each
-    spatial dimension. See :ref:`itu-t81`, clause A.1.1. for more
-    details. The ``V4L2_CID_JPEG_CHROMA_SUBSAMPLING`` control determines
-    how Cb and Cr components are downsampled after converting an input
-    image from RGB to Y'CbCr color space.
-
-.. tabularcolumns:: |p{7.5cm}|p{10.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_444``
-      - No chroma subsampling, each pixel has Y, Cr and Cb values.
-    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_422``
-      - Horizontally subsample Cr, Cb components by a factor of 2.
-    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_420``
-      - Subsample Cr, Cb components horizontally and vertically by 2.
-    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_411``
-      - Horizontally subsample Cr, Cb components by a factor of 4.
-    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_410``
-      - Subsample Cr, Cb components horizontally by 4 and vertically by 2.
-    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY``
-      - Use only luminance component.
-
-
-
-``V4L2_CID_JPEG_RESTART_INTERVAL (integer)``
-    The restart interval determines an interval of inserting RSTm
-    markers (m = 0..7). The purpose of these markers is to additionally
-    reinitialize the encoder process, in order to process blocks of an
-    image independently. For the lossy compression processes the restart
-    interval unit is MCU (Minimum Coded Unit) and its value is contained
-    in DRI (Define Restart Interval) marker. If
-    ``V4L2_CID_JPEG_RESTART_INTERVAL`` control is set to 0, DRI and RSTm
-    markers will not be inserted.
-
-.. _jpeg-quality-control:
-
-``V4L2_CID_JPEG_COMPRESSION_QUALITY (integer)``
-    ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control determines trade-off
-    between image quality and size. It provides simpler method for
-    applications to control image quality, without a need for direct
-    reconfiguration of luminance and chrominance quantization tables. In
-    cases where a driver uses quantization tables configured directly by
-    an application, using interfaces defined elsewhere,
-    ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control should be set by
-    driver to 0.
-
-    The value range of this control is driver-specific. Only positive,
-    non-zero values are meaningful. The recommended range is 1 - 100,
-    where larger values correspond to better image quality.
-
-.. _jpeg-active-marker-control:
-
-``V4L2_CID_JPEG_ACTIVE_MARKER (bitmask)``
-    Specify which JPEG markers are included in compressed stream. This
-    control is valid only for encoders.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_JPEG_ACTIVE_MARKER_APP0``
-      - Application data segment APP\ :sub:`0`.
-    * - ``V4L2_JPEG_ACTIVE_MARKER_APP1``
-      - Application data segment APP\ :sub:`1`.
-    * - ``V4L2_JPEG_ACTIVE_MARKER_COM``
-      - Comment segment.
-    * - ``V4L2_JPEG_ACTIVE_MARKER_DQT``
-      - Quantization tables segment.
-    * - ``V4L2_JPEG_ACTIVE_MARKER_DHT``
-      - Huffman tables segment.
-
-
-
-For more details about JPEG specification, refer to :ref:`itu-t81`,
-:ref:`jfif`, :ref:`w3c-jpeg-jfif`.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-rf-tuner.rst b/Documentation/media/uapi/v4l/ext-ctrls-rf-tuner.rst
deleted file mode 100644
index 0fb85ba878dd..000000000000
--- a/Documentation/media/uapi/v4l/ext-ctrls-rf-tuner.rst
+++ /dev/null
@@ -1,96 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _rf-tuner-controls:
-
-**************************
-RF Tuner Control Reference
-**************************
-
-The RF Tuner (RF_TUNER) class includes controls for common features of
-devices having RF tuner.
-
-In this context, RF tuner is radio receiver circuit between antenna and
-demodulator. It receives radio frequency (RF) from the antenna and
-converts that received signal to lower intermediate frequency (IF) or
-baseband frequency (BB). Tuners that could do baseband output are often
-called Zero-IF tuners. Older tuners were typically simple PLL tuners
-inside a metal box, while newer ones are highly integrated chips
-without a metal box "silicon tuners". These controls are mostly
-applicable for new feature rich silicon tuners, just because older
-tuners does not have much adjustable features.
-
-For more information about RF tuners see
-`Tuner (radio) <http://en.wikipedia.org/wiki/Tuner_%28radio%29>`__
-and `RF front end <http://en.wikipedia.org/wiki/RF_front_end>`__
-from Wikipedia.
-
-
-.. _rf-tuner-control-id:
-
-RF_TUNER Control IDs
-====================
-
-``V4L2_CID_RF_TUNER_CLASS (class)``
-    The RF_TUNER class descriptor. Calling
-    :ref:`VIDIOC_QUERYCTRL` for this control will
-    return a description of this control class.
-
-``V4L2_CID_RF_TUNER_BANDWIDTH_AUTO (boolean)``
-    Enables/disables tuner radio channel bandwidth configuration. In
-    automatic mode bandwidth configuration is performed by the driver.
-
-``V4L2_CID_RF_TUNER_BANDWIDTH (integer)``
-    Filter(s) on tuner signal path are used to filter signal according
-    to receiving party needs. Driver configures filters to fulfill
-    desired bandwidth requirement. Used when
-    V4L2_CID_RF_TUNER_BANDWIDTH_AUTO is not set. Unit is in Hz. The
-    range and step are driver-specific.
-
-``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO (boolean)``
-    Enables/disables LNA automatic gain control (AGC)
-
-``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO (boolean)``
-    Enables/disables mixer automatic gain control (AGC)
-
-``V4L2_CID_RF_TUNER_IF_GAIN_AUTO (boolean)``
-    Enables/disables IF automatic gain control (AGC)
-
-``V4L2_CID_RF_TUNER_RF_GAIN (integer)``
-    The RF amplifier is the very first amplifier on the receiver signal
-    path, just right after the antenna input. The difference between the
-    LNA gain and the RF gain in this document is that the LNA gain is
-    integrated in the tuner chip while the RF gain is a separate chip.
-    There may be both RF and LNA gain controls in the same device. The
-    range and step are driver-specific.
-
-``V4L2_CID_RF_TUNER_LNA_GAIN (integer)``
-    LNA (low noise amplifier) gain is first gain stage on the RF tuner
-    signal path. It is located very close to tuner antenna input. Used
-    when ``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO`` is not set. See
-    ``V4L2_CID_RF_TUNER_RF_GAIN`` to understand how RF gain and LNA gain
-    differs from the each others. The range and step are
-    driver-specific.
-
-``V4L2_CID_RF_TUNER_MIXER_GAIN (integer)``
-    Mixer gain is second gain stage on the RF tuner signal path. It is
-    located inside mixer block, where RF signal is down-converted by the
-    mixer. Used when ``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO`` is not set.
-    The range and step are driver-specific.
-
-``V4L2_CID_RF_TUNER_IF_GAIN (integer)``
-    IF gain is last gain stage on the RF tuner signal path. It is
-    located on output of RF tuner. It controls signal level of
-    intermediate frequency output or baseband output. Used when
-    ``V4L2_CID_RF_TUNER_IF_GAIN_AUTO`` is not set. The range and step
-    are driver-specific.
-
-``V4L2_CID_RF_TUNER_PLL_LOCK (boolean)``
-    Is synthesizer PLL locked? RF tuner is receiving given frequency
-    when that control is set. This is a read-only control.
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
deleted file mode 100644
index 655362483730..000000000000
--- a/Documentation/media/uapi/v4l/extended-controls.rst
+++ /dev/null
@@ -1,180 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _extended-controls:
-
-*********************
-Extended Controls API
-*********************
-
-
-Introduction
-============
-
-The control mechanism as originally designed was meant to be used for
-user settings (brightness, saturation, etc). However, it turned out to
-be a very useful model for implementing more complicated driver APIs
-where each driver implements only a subset of a larger API.
-
-The MPEG encoding API was the driving force behind designing and
-implementing this extended control mechanism: the MPEG standard is quite
-large and the currently supported hardware MPEG encoders each only
-implement a subset of this standard. Further more, many parameters
-relating to how the video is encoded into an MPEG stream are specific to
-the MPEG encoding chip since the MPEG standard only defines the format
-of the resulting MPEG stream, not how the video is actually encoded into
-that format.
-
-Unfortunately, the original control API lacked some features needed for
-these new uses and so it was extended into the (not terribly originally
-named) extended control API.
-
-Even though the MPEG encoding API was the first effort to use the
-Extended Control API, nowadays there are also other classes of Extended
-Controls, such as Camera Controls and FM Transmitter Controls. The
-Extended Controls API as well as all Extended Controls classes are
-described in the following text.
-
-
-The Extended Control API
-========================
-
-Three new ioctls are available:
-:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
-:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and
-:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`. These ioctls act
-on arrays of controls (as opposed to the
-:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
-:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls that act on a single
-control). This is needed since it is often required to atomically change
-several controls at once.
-
-Each of the new ioctls expects a pointer to a struct
-:c:type:`v4l2_ext_controls`. This structure
-contains a pointer to the control array, a count of the number of
-controls in that array and a control class. Control classes are used to
-group similar controls into a single class. For example, control class
-``V4L2_CTRL_CLASS_USER`` contains all user controls (i. e. all controls
-that can also be set using the old :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>`
-ioctl). Control class ``V4L2_CTRL_CLASS_MPEG`` contains all controls
-relating to MPEG encoding, etc.
-
-All controls in the control array must belong to the specified control
-class. An error is returned if this is not the case.
-
-It is also possible to use an empty control array (``count`` == 0) to check
-whether the specified control class is supported.
-
-The control array is a struct
-:c:type:`v4l2_ext_control` array. The
-struct :c:type:`v4l2_ext_control` is very similar to
-struct :c:type:`v4l2_control`, except for the fact that
-it also allows for 64-bit values and pointers to be passed.
-
-Since the struct :c:type:`v4l2_ext_control` supports
-pointers it is now also possible to have controls with compound types
-such as N-dimensional arrays and/or structures. You need to specify the
-``V4L2_CTRL_FLAG_NEXT_COMPOUND`` when enumerating controls to actually
-be able to see such compound controls. In other words, these controls
-with compound types should only be used programmatically.
-
-Since such compound controls need to expose more information about
-themselves than is possible with :ref:`VIDIOC_QUERYCTRL <VIDIOC_QUERYCTRL>`
-the :ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>` ioctl was added. In
-particular, this ioctl gives the dimensions of the N-dimensional array if
-this control consists of more than one element.
-
-.. note::
-
-   #. It is important to realize that due to the flexibility of controls it is
-      necessary to check whether the control you want to set actually is
-      supported in the driver and what the valid range of values is. So use
-      :ref:`VIDIOC_QUERYCTRL` to check this.
-
-   #. It is possible that some of the menu indices in a control of
-      type ``V4L2_CTRL_TYPE_MENU`` may not be supported (``VIDIOC_QUERYMENU``
-      will return an error). A good example is the list of supported MPEG
-      audio bitrates. Some drivers only support one or two bitrates, others
-      support a wider range.
-
-All controls use machine endianness.
-
-
-Enumerating Extended Controls
-=============================
-
-The recommended way to enumerate over the extended controls is by using
-:ref:`VIDIOC_QUERYCTRL` in combination with the
-``V4L2_CTRL_FLAG_NEXT_CTRL`` flag:
-
-
-.. code-block:: c
-
-    struct v4l2_queryctrl qctrl;
-
-    qctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL;
-    while (0 == ioctl (fd, VIDIOC_QUERYCTRL, &qctrl)) {
-	/* ... */
-	qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
-    }
-
-The initial control ID is set to 0 ORed with the
-``V4L2_CTRL_FLAG_NEXT_CTRL`` flag. The ``VIDIOC_QUERYCTRL`` ioctl will
-return the first control with a higher ID than the specified one. When
-no such controls are found an error is returned.
-
-If you want to get all controls within a specific control class, then
-you can set the initial ``qctrl.id`` value to the control class and add
-an extra check to break out of the loop when a control of another
-control class is found:
-
-
-.. code-block:: c
-
-    qctrl.id = V4L2_CTRL_CLASS_MPEG | V4L2_CTRL_FLAG_NEXT_CTRL;
-    while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &qctrl)) {
-	if (V4L2_CTRL_ID2CLASS(qctrl.id) != V4L2_CTRL_CLASS_MPEG)
-	    break;
-	/* ... */
-	qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
-    }
-
-The 32-bit ``qctrl.id`` value is subdivided into three bit ranges: the
-top 4 bits are reserved for flags (e. g. ``V4L2_CTRL_FLAG_NEXT_CTRL``)
-and are not actually part of the ID. The remaining 28 bits form the
-control ID, of which the most significant 12 bits define the control
-class and the least significant 16 bits identify the control within the
-control class. It is guaranteed that these last 16 bits are always
-non-zero for controls. The range of 0x1000 and up are reserved for
-driver-specific controls. The macro ``V4L2_CTRL_ID2CLASS(id)`` returns
-the control class ID based on a control ID.
-
-If the driver does not support extended controls, then
-``VIDIOC_QUERYCTRL`` will fail when used in combination with
-``V4L2_CTRL_FLAG_NEXT_CTRL``. In that case the old method of enumerating
-control should be used (see :ref:`enum_all_controls`). But if it is
-supported, then it is guaranteed to enumerate over all controls,
-including driver-private controls.
-
-
-Creating Control Panels
-=======================
-
-It is possible to create control panels for a graphical user interface
-where the user can select the various controls. Basically you will have
-to iterate over all controls using the method described above. Each
-control class starts with a control of type
-``V4L2_CTRL_TYPE_CTRL_CLASS``. ``VIDIOC_QUERYCTRL`` will return the name
-of this control class which can be used as the title of a tab page
-within a control panel.
-
-The flags field of struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` also
-contains hints on the behavior of the control. See the
-:ref:`VIDIOC_QUERYCTRL` documentation for more
-details.
diff --git a/Documentation/media/uapi/v4l/field-order.rst b/Documentation/media/uapi/v4l/field-order.rst
deleted file mode 100644
index c422bebe4314..000000000000
--- a/Documentation/media/uapi/v4l/field-order.rst
+++ /dev/null
@@ -1,172 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _field-order:
-
-***********
-Field Order
-***********
-
-We have to distinguish between progressive and interlaced video.
-Progressive video transmits all lines of a video image sequentially.
-Interlaced video divides an image into two fields, containing only the
-odd and even lines of the image, respectively. Alternating the so called
-odd and even field are transmitted, and due to a small delay between
-fields a cathode ray TV displays the lines interleaved, yielding the
-original frame. This curious technique was invented because at refresh
-rates similar to film the image would fade out too quickly. Transmitting
-fields reduces the flicker without the necessity of doubling the frame
-rate and with it the bandwidth required for each channel.
-
-It is important to understand a video camera does not expose one frame
-at a time, merely transmitting the frames separated into fields. The
-fields are in fact captured at two different instances in time. An
-object on screen may well move between one field and the next. For
-applications analysing motion it is of paramount importance to recognize
-which field of a frame is older, the *temporal order*.
-
-When the driver provides or accepts images field by field rather than
-interleaved, it is also important applications understand how the fields
-combine to frames. We distinguish between top (aka odd) and bottom (aka
-even) fields, the *spatial order*: The first line of the top field is
-the first line of an interlaced frame, the first line of the bottom
-field is the second line of that frame.
-
-However because fields were captured one after the other, arguing
-whether a frame commences with the top or bottom field is pointless. Any
-two successive top and bottom, or bottom and top fields yield a valid
-frame. Only when the source was progressive to begin with, e. g. when
-transferring film to video, two fields may come from the same frame,
-creating a natural order.
-
-Counter to intuition the top field is not necessarily the older field.
-Whether the older field contains the top or bottom lines is a convention
-determined by the video standard. Hence the distinction between temporal
-and spatial order of fields. The diagrams below should make this
-clearer.
-
-In V4L it is assumed that all video cameras transmit fields on the media
-bus in the same order they were captured, so if the top field was
-captured first (is the older field), the top field is also transmitted
-first on the bus.
-
-All video capture and output devices must report the current field
-order. Some drivers may permit the selection of a different order, to
-this end applications initialize the ``field`` field of struct
-:c:type:`v4l2_pix_format` before calling the
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. If this is not desired it
-should have the value ``V4L2_FIELD_ANY`` (0).
-
-
-enum v4l2_field
-===============
-
-.. c:type:: v4l2_field
-
-.. tabularcolumns:: |p{5.8cm}|p{0.6cm}|p{11.1cm}|
-
-.. cssclass:: longtable
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_FIELD_ANY``
-      - 0
-      - Applications request this field order when any field format
-	is acceptable. Drivers choose depending on hardware capabilities or
-	e.g. the requested image size, and return the actual field order.
-	Drivers must never return ``V4L2_FIELD_ANY``.
-	If multiple field orders are possible the
-	driver must choose one of the possible field orders during
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` or
-	:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>`. struct
-	:c:type:`v4l2_buffer` ``field`` can never be
-	``V4L2_FIELD_ANY``.
-    * - ``V4L2_FIELD_NONE``
-      - 1
-      - Images are in progressive (frame-based) format, not interlaced
-        (field-based).
-    * - ``V4L2_FIELD_TOP``
-      - 2
-      - Images consist of the top (aka odd) field only.
-    * - ``V4L2_FIELD_BOTTOM``
-      - 3
-      - Images consist of the bottom (aka even) field only. Applications
-	may wish to prevent a device from capturing interlaced images
-	because they will have "comb" or "feathering" artefacts around
-	moving objects.
-    * - ``V4L2_FIELD_INTERLACED``
-      - 4
-      - Images contain both fields, interleaved line by line. The temporal
-	order of the fields (whether the top or bottom field is older)
-	depends on the current video standard. In M/NTSC the bottom
-	field is the older field. In all other standards the top field
-	is the older field.
-    * - ``V4L2_FIELD_SEQ_TB``
-      - 5
-      - Images contain both fields, the top field lines are stored first
-	in memory, immediately followed by the bottom field lines. Fields
-	are always stored in temporal order, the older one first in
-	memory. Image sizes refer to the frame, not fields.
-    * - ``V4L2_FIELD_SEQ_BT``
-      - 6
-      - Images contain both fields, the bottom field lines are stored
-	first in memory, immediately followed by the top field lines.
-	Fields are always stored in temporal order, the older one first in
-	memory. Image sizes refer to the frame, not fields.
-    * - ``V4L2_FIELD_ALTERNATE``
-      - 7
-      - The two fields of a frame are passed in separate buffers, in
-	temporal order, i. e. the older one first. To indicate the field
-	parity (whether the current field is a top or bottom field) the
-	driver or application, depending on data direction, must set
-	struct :c:type:`v4l2_buffer` ``field`` to
-	``V4L2_FIELD_TOP`` or ``V4L2_FIELD_BOTTOM``. Any two successive
-	fields pair to build a frame. If fields are successive, without
-	any dropped fields between them (fields can drop individually),
-	can be determined from the struct
-	:c:type:`v4l2_buffer` ``sequence`` field. This
-	format cannot be selected when using the read/write I/O method
-	since there is no way to communicate if a field was a top or
-	bottom field.
-    * - ``V4L2_FIELD_INTERLACED_TB``
-      - 8
-      - Images contain both fields, interleaved line by line, top field
-	first. The top field is the older field.
-    * - ``V4L2_FIELD_INTERLACED_BT``
-      - 9
-      - Images contain both fields, interleaved line by line, top field
-	first. The bottom field is the older field.
-
-
-
-.. _fieldseq-tb:
-
-Field Order, Top Field First Transmitted
-========================================
-
-.. kernel-figure:: fieldseq_tb.svg
-    :alt:    fieldseq_tb.svg
-    :align:  center
-
-    Field Order, Top Field First Transmitted
-
-
-.. _fieldseq-bt:
-
-Field Order, Bottom Field First Transmitted
-===========================================
-
-.. kernel-figure:: fieldseq_bt.svg
-    :alt:    fieldseq_bt.svg
-    :align:  center
-
-    Field Order, Bottom Field First Transmitted
diff --git a/Documentation/media/uapi/v4l/fieldseq_bt.svg b/Documentation/media/uapi/v4l/fieldseq_bt.svg
deleted file mode 100644
index 1dab1cd1b6de..000000000000
--- a/Documentation/media/uapi/v4l/fieldseq_bt.svg
+++ /dev/null
@@ -1,2621 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   id="svg3619"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   xml:space="preserve"
-   width="198.48296mm"
-   height="211.89406mm"
-   viewBox="0 0 703.28606 750.80571"
-   sodipodi:docname="fieldseq_bt.svg"><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview3621"
-     showgrid="false"
-     units="mm"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:zoom="1.0721815"
-     inkscape:cx="8.4175633"
-     inkscape:cy="371.67214"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="g3627" /><metadata
-     id="metadata3625"><rdf:RDF><cc:Work
-	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
-     id="defs3623"><clipPath
-       id="clipPath4301"
-       clipPathUnits="userSpaceOnUse"><path
-	 style="clip-rule:evenodd"
-	 inkscape:connector-curvature="0"
-	 id="path4303"
-	 d="M 0,6040 0,0 l 5650,0 0,6040 -5650,0 z m 4786.76,-99.89 103.92,0 0,56.69 -103.92,0 0,0 85.03,-28.35 -85.03,-28.34 z" /></clipPath></defs><g
-     transform="matrix(1.25,0,0,-1.25,-1.0537,751.94632)"
-     inkscape:label="fieldseq_bt"
-     inkscape:groupmode="layer"
-     id="g3627"><path
-       d="m 188.622,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3631"
-       inkscape:connector-curvature="0" /><path
-       d="m 375.693,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3633"
-       inkscape:connector-curvature="0" /><path
-       d="m 282.157,346.001 93.5355,0 0,42.516 -93.5355,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3635"
-       inkscape:connector-curvature="0" /><path
-       d="m 469.228,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3637"
-       inkscape:connector-curvature="0" /><path
-       d="m 95.0867,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3639"
-       inkscape:connector-curvature="0" /><path
-       d="m 1.55156,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3641"
-       inkscape:connector-curvature="0" /><path
-       d="m 95.0867,482.052 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3643"
-       inkscape:connector-curvature="0" /><path
-       d="m 469.228,482.052 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3645"
-       inkscape:connector-curvature="0" /><path
-       d="m 1.55156,414.027 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3647"
-       inkscape:connector-curvature="0" /><path
-       d="m 188.622,414.027 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3649"
-       inkscape:connector-curvature="0" /><path
-       d="m 375.693,414.027 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3651"
-       inkscape:connector-curvature="0" /><path
-       d="m 469.228,214.201 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3653"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3655"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3657"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3659"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3661"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3663"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3665"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3667"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3669"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3671"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3673"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3675"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3677"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3679"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3681"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3683"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3685"
-       inkscape:connector-curvature="0" /><path
-       d="m 282.157,482.052 93.5355,0 0,42.516 -93.5355,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3687"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,222.704 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3689"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,222.704 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3691"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,231.207 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3693"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,231.207 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3695"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,226.956 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3697"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,226.956 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3699"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,239.711 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3701"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,239.711 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3703"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,235.459 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3705"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,235.459 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3707"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,248.214 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3709"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,248.214 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3711"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,243.962 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3713"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,243.962 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3715"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,256.717 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3717"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,256.717 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3719"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,252.466 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3721"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,252.466 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3723"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,265.22 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3725"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,265.22 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3727"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,260.969 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3729"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,260.969 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3731"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,273.723 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3733"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,273.723 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3735"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,269.472 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3737"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,269.472 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3739"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,277.975 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3741"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,277.975 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3743"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,218.453 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3745"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,218.453 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3747"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,282.227 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3749"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,282.227 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3751"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3753"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3755"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3757"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3759"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3761"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3763"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3765"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3767"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3769"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3771"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3773"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3775"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3777"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3779"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3781"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3783"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3785"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3787"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3789"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3791"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3793"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3795"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3797"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3799"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3801"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3803"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3805"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3807"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3809"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3811"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3813"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3815"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3817"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3819"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3821"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3823"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3825"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3827"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3829"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3831"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3833"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3835"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3837"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3839"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3841"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3843"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3845"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3847"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,380.014 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3849"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,380.014 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3851"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,371.511 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3853"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,371.511 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3855"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,363.007 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3857"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,363.007 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3859"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,354.504 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3861"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,354.504 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3863"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,358.755 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3865"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,358.755 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3867"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,350.252 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3869"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,350.252 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3871"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,367.259 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3873"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,367.259 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3875"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,375.762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3877"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,375.762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3879"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3881"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3883"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3885"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3887"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3889"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3891"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3893"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3895"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3897"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3899"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3901"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3903"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3905"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3907"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3909"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3911"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3913"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3915"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3917"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3919"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3921"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3923"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3925"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3927"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3929"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3931"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3933"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3935"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3937"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3939"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3941"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3943"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3945"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3947"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3949"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3951"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3953"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3955"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3957"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3959"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3961"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3963"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3965"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3967"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3969"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3971"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3973"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3975"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3977"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3979"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3981"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3983"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3985"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3987"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3989"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3991"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3993"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3995"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path3997"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path3999"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4001"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4003"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4005"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4007"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4009"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4011"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4013"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4015"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4017"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4019"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4021"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4023"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4025"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4027"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4029"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4031"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4033"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4035"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4037"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4039"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,511.813 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4041"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,511.813 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4043"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,503.31 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4045"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,503.31 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4047"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,494.807 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4049"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,494.807 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4051"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,486.304 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4053"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,486.304 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4055"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,516.065 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4057"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,516.065 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4059"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,507.562 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4061"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,507.562 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4063"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,499.059 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4065"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,499.059 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4067"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,490.555 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4069"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,490.555 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4071"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,516.065 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4073"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,516.065 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4075"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,507.562 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4077"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,507.562 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4079"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,499.059 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4081"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,499.059 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4083"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,490.555 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4085"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,490.555 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4087"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,494.807 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4089"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,494.807 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4091"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,486.304 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4093"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,486.304 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4095"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,503.31 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4097"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,503.31 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4099"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,511.813 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4101"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,511.813 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4103"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,511.813 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4105"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,511.813 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4107"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,503.31 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4109"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,503.31 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4111"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,494.807 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4113"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,494.807 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4115"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,486.304 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4117"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,486.304 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4119"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,516.065 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4121"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,516.065 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4123"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,507.562 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4125"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,507.562 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4127"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,499.059 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4129"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,499.059 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4131"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,490.555 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4133"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,490.555 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4135"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4137"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4139"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4141"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4143"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4145"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4147"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4149"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4151"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4153"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4155"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4157"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4159"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4161"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4163"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4165"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4167"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,579.839 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4169"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,579.839 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4171"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,571.336 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4173"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,571.336 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4175"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,562.832 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4177"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,562.832 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4179"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,554.329 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4181"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,554.329 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4183"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,558.581 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4185"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,558.581 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4187"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,550.078 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4189"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,550.078 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4191"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,567.084 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4193"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,567.084 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4195"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,575.587 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4197"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,575.587 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4199"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4201"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4203"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4205"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4207"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4209"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4211"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4213"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4215"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4217"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4219"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4221"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4223"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4225"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4227"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4229"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4231"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4233"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4235"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4237"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4239"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4241"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4243"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4245"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4247"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4249"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4251"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4253"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4255"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4257"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4259"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4261"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4263"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4265"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4267"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4269"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4271"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4273"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4275"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4277"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4279"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4281"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4283"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4285"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4287"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4289"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4291"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4293"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4295"
-       inkscape:connector-curvature="0" /><g
-       transform="scale(0.1,0.1)"
-       id="g4297"
-       style=""><g
-	 id="g4299"
-	 clip-path="url(#clipPath4301)"
-	 style=""><path
-	   d="m 3778.18,5968.45 1105.42,0"
-	   style="fill:none;stroke:#000000;stroke-width:14.17199993;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   id="path4305"
-	   inkscape:connector-curvature="0" /></g></g><path
-       d="m 478.676,594.011 8.503,2.834 -8.503,2.835 0,-5.669"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4307"
-       inkscape:connector-curvature="0" /><path
-       d="m 478.676,594.011 8.503,2.834 -8.503,2.835 0,-5.669 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4309"
-       inkscape:connector-curvature="0" /><path
-       d="m 95.0867,1.62109 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4311"
-       inkscape:connector-curvature="0" /><path
-       d="m 282.157,1.62109 93.5355,0 0,76.5289 -93.5355,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4313"
-       inkscape:connector-curvature="0" /><path
-       d="m 469.228,1.62109 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4315"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,10.1242 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4317"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,10.1242 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4319"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,18.6277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4321"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,18.6277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4323"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,27.1309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4325"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,27.1309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4327"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,35.634 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4329"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,35.634 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4331"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,5.87266 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4333"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,5.87266 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4335"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,14.3762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4337"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,14.3762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4339"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,22.8793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4341"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,22.8793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4343"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,31.3824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4345"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,31.3824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4347"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,10.1242 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4349"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,10.1242 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4351"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,18.6277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4353"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,18.6277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4355"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,27.1309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4357"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,27.1309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4359"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,35.634 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4361"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,35.634 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4363"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,5.87266 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4365"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,5.87266 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4367"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,14.3762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4369"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,14.3762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4371"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,22.8793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4373"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,22.8793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4375"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,31.3824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4377"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,31.3824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4379"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,69.6469 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4381"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,69.6469 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4383"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,65.3953 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4385"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,65.3953 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4387"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,61.1438 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4389"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,61.1438 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4391"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,56.8922 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4393"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,56.8922 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4395"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,52.6402 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4397"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,52.6402 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4399"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,48.3887 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4401"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,48.3887 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4403"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,44.1371 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4405"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,44.1371 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4407"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,5.87266 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4409"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,5.87266 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4411"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,10.1242 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4413"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,10.1242 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4415"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,14.3762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4417"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,14.3762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4419"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,18.6277 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4421"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,18.6277 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4423"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,22.8793 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4425"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,22.8793 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4427"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,27.1309 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4429"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,27.1309 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4431"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,31.3824 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4433"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,31.3824 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4435"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,39.8855 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4437"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,39.8855 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4439"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,35.634 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4441"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,35.634 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4443"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,39.8855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4445"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,39.8855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4447"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,48.3887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4449"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,48.3887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4451"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,56.8922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4453"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,56.8922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4455"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,65.3953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4457"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,65.3953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4459"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,44.1371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4461"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,44.1371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4463"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,52.6402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4465"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,52.6402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4467"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,61.1438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4469"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,61.1438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4471"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,69.6469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4473"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,69.6469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4475"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,39.8855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4477"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,39.8855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4479"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,48.3887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4481"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,48.3887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4483"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,56.8922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4485"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,56.8922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4487"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,65.3953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4489"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,65.3953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4491"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,44.1371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4493"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,44.1371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4495"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,52.6402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4497"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,52.6402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4499"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,61.1438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4501"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,61.1438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4503"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,69.6469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4505"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,69.6469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4507"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4509"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4511"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4513"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4515"
-       inkscape:connector-curvature="0" /><path
-       d="m 188.622,107.911 93.5352,0 0,76.5285 -93.5352,0 0,-76.5285 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4517"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4519"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4521"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4523"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4525"
-       inkscape:connector-curvature="0" /><path
-       d="m 375.693,107.911 93.5352,0 0,76.5285 -93.5352,0 0,-76.5285 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4527"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4529"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4531"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4533"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4535"
-       inkscape:connector-curvature="0" /><path
-       d="m 1.55156,107.911 93.5352,0 0,76.5285 -93.5352,0 0,-76.5285 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4537"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4539"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4541"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4543"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4545"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4547"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4549"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4551"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4553"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4555"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4557"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4559"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4561"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4563"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4565"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4567"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4569"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4571"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4573"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4575"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4577"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4579"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4581"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4583"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4585"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4587"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4589"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4591"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4593"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4595"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4597"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4599"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4601"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4603"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4605"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4607"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4609"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4611"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4613"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4615"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4617"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4619"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4621"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4623"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4625"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4627"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4629"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4631"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4633"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4635"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4637"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4639"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4641"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4643"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4645"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4647"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4649"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4651"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4653"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4655"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4657"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4659"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4661"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4663"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4665"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4667"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4669"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4671"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4673"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4675"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4677"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4679"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4681"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4683"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4685"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4687"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4689"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4691"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4693"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4695"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4697"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4699"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4701"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4703"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4705"
-       inkscape:connector-curvature="0" /><path
-       d="m 95.0867,214.201 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4707"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,222.704 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4709"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,222.704 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4711"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,231.207 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4713"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,231.207 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4715"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,226.956 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4717"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,226.956 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4719"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,239.711 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4721"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,239.711 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4723"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,235.459 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4725"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,235.459 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4727"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,248.214 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4729"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,248.214 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4731"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,243.962 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4733"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,243.962 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4735"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,256.717 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4737"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,256.717 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4739"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,252.466 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4741"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,252.466 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4743"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,265.22 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4745"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,265.22 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4747"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,260.969 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4749"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,260.969 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4751"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,273.723 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4753"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,273.723 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4755"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,269.472 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4757"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,269.472 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4759"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,277.975 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4761"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,277.975 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4763"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,218.453 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4765"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,218.453 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4767"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,282.227 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4769"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,282.227 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4771"
-       inkscape:connector-curvature="0" /><path
-       d="m 282.157,214.201 93.5355,0 0,76.5289 -93.5355,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4773"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,277.975 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4775"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,277.975 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4777"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,282.227 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4779"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,282.227 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4781"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,273.723 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4783"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,273.723 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4785"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,248.214 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4787"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,248.214 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4789"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,239.711 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4791"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,239.711 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4793"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,231.207 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4795"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,231.207 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4797"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,222.704 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4799"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,222.704 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4801"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,269.472 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4803"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,269.472 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4805"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,256.717 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4807"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,256.717 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4809"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,265.22 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4811"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,265.22 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4813"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,260.969 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4815"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,260.969 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4817"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,252.466 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4819"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,252.466 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4821"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,243.962 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4823"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,243.962 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4825"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,235.459 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4827"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,235.459 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4829"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,226.956 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4831"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,226.956 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4833"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,218.453 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path4835"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,218.453 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path4837"
-       inkscape:connector-curvature="0" /><text
-       y="-533.07098"
-       x="5.8031301"
-       id="text4841"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4843"
-	 sodipodi:role="line"
-	 y="-533.07098"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan><tspan
-	 id="tspan4845"
-	 sodipodi:role="line"
-	 y="-465.04559"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan><tspan
-	 id="tspan4847"
-	 sodipodi:role="line"
-	 y="-397.0202"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
-<text
-       y="-316.23969"
-       x="103.58983"
-       id="text4849"
-       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4851"
-	 sodipodi:role="line"
-	 y="-316.23969"
-	 x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOM</tspan><tspan
-	 id="tspan4853"
-	 sodipodi:role="line"
-	 y="-328.99481"
-	 x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text>
-<text
-       y="-592.59381"
-       x="5.8034"
-       id="text4855"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4857"
-	 sodipodi:role="line"
-	 y="-592.59381"
-	 x="5.8034 13.134789 19.806232 29.801399 36.472843 43.144287 47.139954 53.811398 56.475174 59.810898 66.482346 70.478004 77.149452 83.820892 87.816566 91.152283 94.488007 101.15945 107.83089 111.16662 114.50233 121.17377 131.16895 134.50468 137.84041 140.50418 147.17563 149.8394 156.51085 159.84657 163.1823 165.84607 169.84174 175.84123 179.17696 182.51268 185.8484 189.84407 196.51552 203.18695 209.18646 219.18163 221.8454 225.18112 228.51685 235.18829 241.85973 245.19545 249.19112 255.86256 259.19827 265.86972 269.20544 272.54117 282.53635 285.87207 294.53534 301.86673 309.87006 318.53336">Temporal order, bottom field first transmitted (e.g. M/NTSC)</tspan></text>
-<text
-       y="-316.23981"
-       x="290.6604"
-       id="text4859"
-       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4861"
-	 sodipodi:role="line"
-	 y="-316.23981"
-	 x="290.6604 296.16284 300.74957 305.3363 309.92303 314.50977 319.55023 321.8436 327.34601 331.93274 337.88889 342.47565 347.51608 353.9342 477.73062 483.23306 487.81979 492.40652 496.99326 501.57999 506.62045 508.91382 514.41626 519.00299 524.95911 529.5459 534.5863 541.00446">V4L2_FIELD_TOPV4L2_FIELD_TOP</tspan></text>
-<text
-       y="-299.23349"
-       x="5.8034"
-       id="text4863"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4865"
-	 sodipodi:role="line"
-	 y="-299.23349"
-	 x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_BT</tspan><tspan
-	 id="tspan4867"
-	 sodipodi:role="line"
-	 y="-192.9435"
-	 x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001">V4L2_FIELD_INTERLACED_TB (misaligned)</tspan><tspan
-	 id="tspan4869"
-	 sodipodi:role="line"
-	 y="-86.653496"
-	 x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579">V4L2_FIELD_SEQ_BT</tspan></text>
-<text
-       y="-533.07098"
-       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464"
-       id="text4592"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4594"
-	 sodipodi:role="line"
-	 y="-533.07098"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan></text>
-<text
-       y="-465.04559"
-       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054"
-       id="text4596"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4598"
-	 sodipodi:role="line"
-	 y="-465.04559"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan></text>
-<text
-       y="-397.0202"
-       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963"
-       id="text4600"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4602"
-	 sodipodi:role="line"
-	 y="-397.0202"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
-<text
-       y="-299.23349"
-       x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012"
-       id="text5862"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan5864"
-	 sodipodi:role="line"
-	 y="-299.23349"
-	 x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_BT</tspan></text>
-<text
-       y="-192.9435"
-       x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001"
-       id="text5866"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan5868"
-	 sodipodi:role="line"
-	 y="-192.9435"
-	 x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001">V4L2_FIELD_INTERLACED_TB (misaligned)</tspan></text>
-<text
-       y="-86.653496"
-       x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579"
-       id="text5870"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan5872"
-	 sodipodi:role="line"
-	 y="-86.653496"
-	 x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579">V4L2_FIELD_SEQ_BT</tspan></text>
-<text
-       y="-316.23969"
-       x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659"
-       id="text7144"
-       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan7146"
-	 sodipodi:role="line"
-	 y="-316.23969"
-	 x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOM</tspan></text>
-<text
-       y="-328.99481"
-       x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322"
-       id="text7148"
-       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan7150"
-	 sodipodi:role="line"
-	 y="-328.99481"
-	 x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text>
-</g></svg>
diff --git a/Documentation/media/uapi/v4l/fieldseq_tb.svg b/Documentation/media/uapi/v4l/fieldseq_tb.svg
deleted file mode 100644
index 041071e43f9b..000000000000
--- a/Documentation/media/uapi/v4l/fieldseq_tb.svg
+++ /dev/null
@@ -1,2618 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   id="svg5543"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   xml:space="preserve"
-   width="198.48296mm"
-   height="210.39415mm"
-   viewBox="0 0 703.28607 745.49109"
-   sodipodi:docname="fieldseq_tb.svg"><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview5545"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     units="mm"
-     inkscape:zoom="1.0733333"
-     inkscape:cx="9.8391479"
-     inkscape:cy="370.19322"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="g5551" /><metadata
-     id="metadata5549"><rdf:RDF><cc:Work
-	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
-     id="defs5547"><clipPath
-       id="clipPath6753"
-       clipPathUnits="userSpaceOnUse"><path
-	 style="clip-rule:evenodd"
-	 inkscape:connector-curvature="0"
-	 id="path6755"
-	 d="M 0,6000 0,0 l 5660,0 0,6000 -5660,0 z m 4786.76,-102.89 103.92,0 0,56.69 -103.92,0 0,0 85.03,-28.35 -85.03,-28.34 z" /></clipPath></defs><g
-     transform="matrix(1.25,0,0,-1.25,-1.0537,746.57119)"
-     inkscape:label="fieldseq_tb"
-     inkscape:groupmode="layer"
-     id="g5551"><path
-       d="m 379.944,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5555"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5557"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5559"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5561"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5563"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5565"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5567"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5569"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5571"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5573"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5575"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5577"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5579"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5581"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5583"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5585"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5587"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5589"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5591"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5593"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5595"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5597"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5599"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5601"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5603"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5605"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5607"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5609"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5611"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5613"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5615"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5617"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5619"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5621"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5623"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5625"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5627"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5629"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5631"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5633"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5635"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5637"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5639"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5641"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5643"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5645"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5647"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5649"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,443.739 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5651"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,443.739 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5653"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,435.236 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5655"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,435.236 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5657"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,426.733 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5659"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,426.733 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5661"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,418.23 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5663"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,418.23 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5665"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,439.488 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5667"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,439.488 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5669"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,430.984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5671"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,430.984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5673"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,422.481 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5675"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,422.481 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5677"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,413.978 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5679"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,413.978 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5681"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,218.404 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5683"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,218.404 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5685"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,226.907 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5687"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,226.907 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5689"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,222.656 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5691"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,222.656 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5693"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,235.411 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5695"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,235.411 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5697"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,231.159 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5699"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,231.159 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5701"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,243.914 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5703"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,243.914 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5705"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,239.662 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5707"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,239.662 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5709"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,252.417 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5711"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,252.417 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5713"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,248.166 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5715"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,248.166 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5717"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,260.92 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5719"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,260.92 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5721"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,256.669 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5723"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,256.669 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5725"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,269.423 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5727"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,269.423 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5729"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,265.172 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5731"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,265.172 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5733"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,273.675 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5735"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,273.675 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5737"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,214.153 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5739"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,214.153 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5741"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,277.927 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5743"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,277.927 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5745"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,218.404 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5747"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,218.404 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5749"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,226.907 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5751"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,226.907 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5753"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,222.656 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5755"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,222.656 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5757"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,235.411 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5759"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,235.411 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5761"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,231.159 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5763"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,231.159 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5765"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,243.914 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5767"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,243.914 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5769"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,239.662 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5771"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,239.662 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5773"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,252.417 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5775"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,252.417 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5777"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,248.166 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5779"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,248.166 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5781"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,260.92 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5783"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,260.92 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5785"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,256.669 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5787"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,256.669 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5789"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,269.423 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5791"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,269.423 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5793"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,265.172 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5795"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,265.172 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5797"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,273.675 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5799"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,273.675 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5801"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,214.153 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5803"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,214.153 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5805"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,277.927 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5807"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,277.927 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5809"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5811"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5813"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5815"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5817"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5819"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5821"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5823"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5825"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5827"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5829"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5831"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5833"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5835"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5837"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5839"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5841"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5843"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5845"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5847"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5849"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5851"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5853"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5855"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5857"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5859"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5861"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5863"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5865"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5867"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5869"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5871"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5873"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,35.5855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5875"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,35.5855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5877"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,27.0824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5879"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,27.0824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5881"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,18.5793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5883"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,18.5793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5885"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,10.0762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5887"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,10.0762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5889"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,31.334 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5891"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,31.334 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5893"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,22.8309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5895"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,22.8309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5897"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,14.3277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5899"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,14.3277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5901"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,5.82422 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5903"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,5.82422 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5905"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,35.5855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5907"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,35.5855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5909"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,27.0824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5911"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,27.0824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5913"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,18.5793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5915"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,18.5793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5917"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,10.0762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5919"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,10.0762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5921"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,31.334 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5923"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,31.334 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5925"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,22.8309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5927"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,22.8309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5929"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,14.3277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5931"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,14.3277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5933"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,5.82422 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5935"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,5.82422 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5937"
-       inkscape:connector-curvature="0" /><path
-       d="m 95.0867,409.727 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5939"
-       inkscape:connector-curvature="0" /><path
-       d="m 282.157,409.727 93.5355,0 0,42.516 -93.5355,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5941"
-       inkscape:connector-curvature="0" /><path
-       d="m 469.228,409.727 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5943"
-       inkscape:connector-curvature="0" /><path
-       d="m 469.228,209.901 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5945"
-       inkscape:connector-curvature="0" /><path
-       d="m 282.157,209.901 93.5355,0 0,76.5289 -93.5355,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5947"
-       inkscape:connector-curvature="0" /><path
-       d="m 95.0867,209.901 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5949"
-       inkscape:connector-curvature="0" /><path
-       d="m 95.0867,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5951"
-       inkscape:connector-curvature="0" /><path
-       d="m 282.157,341.701 93.5355,0 0,42.516 -93.5355,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5953"
-       inkscape:connector-curvature="0" /><path
-       d="m 469.228,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5955"
-       inkscape:connector-curvature="0" /><path
-       d="m 1.55156,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5957"
-       inkscape:connector-curvature="0" /><path
-       d="m 188.622,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5959"
-       inkscape:connector-curvature="0" /><path
-       d="m 375.693,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5961"
-       inkscape:connector-curvature="0" /><path
-       d="m 1.55156,477.752 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5963"
-       inkscape:connector-curvature="0" /><path
-       d="m 188.622,477.752 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5965"
-       inkscape:connector-curvature="0" /><path
-       d="m 375.693,477.752 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5967"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5969"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5971"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5973"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5975"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5977"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5979"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5981"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5983"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5985"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5987"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5989"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5991"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5993"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5995"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path5997"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path5999"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6001"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6003"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6005"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6007"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6009"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6011"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6013"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6015"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6017"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6019"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6021"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6023"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6025"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6027"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6029"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6031"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6033"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6035"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6037"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6039"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6041"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6043"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6045"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6047"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6049"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6051"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6053"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6055"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6057"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6059"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6061"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6063"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,443.739 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6065"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,443.739 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6067"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,435.236 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6069"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,435.236 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6071"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,426.733 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6073"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,426.733 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6075"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,418.23 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6077"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,418.23 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6079"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,439.488 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6081"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,439.488 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6083"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,430.984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6085"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,430.984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6087"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,422.481 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6089"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,422.481 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6091"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,413.978 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6093"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,413.978 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6095"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6097"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6099"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,575.539 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6101"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,575.539 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6103"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6105"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6107"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6109"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6111"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6113"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6115"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6117"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6119"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6121"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6123"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6125"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6127"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6129"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6131"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6133"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6135"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6137"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6139"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6141"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6143"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6145"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6147"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6149"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6151"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6153"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6155"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6157"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6159"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6161"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6163"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6165"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6167"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6169"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6171"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6173"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6175"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6177"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6179"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6181"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6183"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6185"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6187"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6189"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6191"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6193"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6195"
-       inkscape:connector-curvature="0" /><path
-       d="m 1.55156,107.863 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6197"
-       inkscape:connector-curvature="0" /><path
-       d="m 188.622,107.863 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6199"
-       inkscape:connector-curvature="0" /><path
-       d="m 375.693,107.863 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6201"
-       inkscape:connector-curvature="0" /><path
-       d="m 95.0867,1.57266 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6203"
-       inkscape:connector-curvature="0" /><path
-       d="m 282.157,1.57266 93.5355,0 0,76.5289 -93.5355,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6205"
-       inkscape:connector-curvature="0" /><path
-       d="m 469.228,1.57266 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
-       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6207"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,65.3469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6209"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,65.3469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6211"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,56.8438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6213"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,56.8438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6215"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,48.3402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6217"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,48.3402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6219"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,39.8371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6221"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,39.8371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6223"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,69.5984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6225"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,69.5984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6227"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,61.0953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6229"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,61.0953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6231"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,52.5922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6233"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,52.5922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6235"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,44.0887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6237"
-       inkscape:connector-curvature="0" /><path
-       d="m 473.479,44.0887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6239"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,65.3469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6241"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,65.3469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6243"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,56.8438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6245"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,56.8438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6247"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,48.3402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6249"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,48.3402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6251"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,39.8371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6253"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,39.8371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6255"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,69.5984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6257"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,69.5984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6259"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,61.0953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6261"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,61.0953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6263"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,52.5922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6265"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,52.5922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6267"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,44.0887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6269"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,44.0887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6271"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,277.927 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6273"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,277.927 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6275"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,269.423 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6277"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,269.423 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6279"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,260.92 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6281"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,260.92 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6283"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,252.417 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6285"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,252.417 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6287"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,243.914 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6289"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,243.914 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6291"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,235.411 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6293"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,235.411 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6295"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,226.907 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6297"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,226.907 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6299"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,218.404 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6301"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,218.404 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6303"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,69.5984 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6305"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,69.5984 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6307"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,65.3469 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6309"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,65.3469 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6311"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,61.0953 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6313"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,61.0953 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6315"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,56.8438 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6317"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,56.8438 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6319"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,52.5922 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6321"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,52.5922 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6323"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,48.3402 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6325"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,48.3402 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6327"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,44.0887 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6329"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,44.0887 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6331"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,39.8371 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6333"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,39.8371 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6335"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,571.287 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6337"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,571.287 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6339"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,567.036 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6341"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,567.036 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6343"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,562.784 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6345"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,562.784 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6347"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,558.532 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6349"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,558.532 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6351"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,554.281 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6353"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,554.281 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6355"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,550.029 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6357"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,550.029 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6359"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,545.778 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6361"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,545.778 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6363"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,443.739 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6365"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,443.739 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6367"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,439.488 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6369"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,439.488 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6371"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,435.236 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6373"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,435.236 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6375"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,430.984 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6377"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,430.984 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6379"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,426.733 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6381"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,426.733 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6383"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,422.481 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6385"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,422.481 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6387"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,418.23 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6389"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,418.23 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6391"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,413.978 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6393"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,413.978 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6395"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,375.714 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6397"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,375.714 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6399"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,371.462 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6401"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,371.462 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6403"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,367.211 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6405"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,367.211 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6407"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,362.959 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6409"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,362.959 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6411"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,358.707 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6413"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,358.707 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6415"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,354.455 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6417"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,354.455 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6419"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,350.204 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6421"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,350.204 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6423"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,345.952 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6425"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,345.952 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6427"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,273.675 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6429"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,273.675 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6431"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,265.172 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6433"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,265.172 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6435"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,256.669 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6437"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,256.669 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6439"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,248.166 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6441"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,248.166 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6443"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,239.662 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6445"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,239.662 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6447"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,231.159 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6449"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,231.159 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6451"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,222.656 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6453"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,222.656 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6455"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,214.153 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6457"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,214.153 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6459"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,35.5855 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6461"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,35.5855 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6463"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,31.334 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6465"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,31.334 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6467"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,27.0824 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6469"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,27.0824 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6471"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,22.8309 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6473"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,22.8309 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6475"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,18.5793 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6477"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,18.5793 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6479"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,14.3277 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6481"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,14.3277 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6483"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,10.0762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6485"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,10.0762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6487"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,5.82422 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6489"
-       inkscape:connector-curvature="0" /><path
-       d="m 286.409,5.82422 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6491"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6493"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6495"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6497"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6499"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6501"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6503"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6505"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6507"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6509"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6511"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6513"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6515"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6517"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6519"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6521"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6523"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6525"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6527"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6529"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6531"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6533"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6535"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6537"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6539"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6541"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6543"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6545"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6547"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6549"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6551"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6553"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6555"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6557"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6559"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6561"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6563"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6565"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6567"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6569"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6571"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6573"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6575"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6577"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6579"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6581"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6583"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6585"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6587"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6589"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6591"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6593"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6595"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6597"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6599"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6601"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6603"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6605"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6607"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6609"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6611"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6613"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6615"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6617"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6619"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6621"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6623"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6625"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6627"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6629"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6631"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6633"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6635"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6637"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6639"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6641"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6643"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6645"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6647"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6649"
-       inkscape:connector-curvature="0" /><path
-       d="m 99.3383,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6651"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6653"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6655"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6657"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6659"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6661"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6663"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6665"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6667"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6669"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6671"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6673"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6675"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6677"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6679"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6681"
-       inkscape:connector-curvature="0" /><path
-       d="m 192.873,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6683"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6685"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6687"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6689"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6691"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6693"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6695"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6697"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6699"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6701"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6703"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6705"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6707"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6709"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6711"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6713"
-       inkscape:connector-curvature="0" /><path
-       d="m 379.944,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6715"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6717"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6719"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6721"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6723"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6725"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6727"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6729"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6731"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6733"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6735"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6737"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6739"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6741"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6743"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6745"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.80312,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6747"
-       inkscape:connector-curvature="0" /><g
-       transform="scale(0.1,0.1)"
-       id="g6749"
-       style=""><g
-	 id="g6751"
-	 clip-path="url(#clipPath6753)"
-	 style=""><path
-	   d="m 3778.18,5925.45 1105.42,0"
-	   style="fill:none;stroke:#000000;stroke-width:14.17199993;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   id="path6757"
-	   inkscape:connector-curvature="0" /></g></g><path
-       d="m 478.676,589.711 8.503,2.834 -8.503,2.835 0,-5.669"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path6759"
-       inkscape:connector-curvature="0" /><path
-       d="m 478.676,589.711 8.503,2.834 -8.503,2.835 0,-5.669 z"
-       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path6761"
-       inkscape:connector-curvature="0" /><text
-       y="-528.771"
-       x="5.8031301"
-       id="text6765"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan6767"
-	 sodipodi:role="line"
-	 y="-528.771"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan><tspan
-	 id="tspan6769"
-	 sodipodi:role="line"
-	 y="-460.74561"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan><tspan
-	 id="tspan6771"
-	 sodipodi:role="line"
-	 y="-392.72021"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
-<text
-       y="-324.69479"
-       x="10.05469"
-       id="text6773"
-       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan6775"
-	 sodipodi:role="line"
-	 y="-324.69479"
-	 x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048">v4l2_buffer.field:</tspan><tspan
-	 id="tspan6777"
-	 sodipodi:role="line"
-	 y="-311.9397"
-	 x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338
-538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text>
-<text
-       y="-588.2937"
-       x="5.8031301"
-       id="text6779"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan6781"
-	 sodipodi:role="line"
-	 y="-588.2937"
-	 x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096">Temporal order, top field first transmitted (e.g. BG/PAL)</tspan><tspan
-	 id="tspan6783"
-	 sodipodi:role="line"
-	 y="-86.604706"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357">V4L2_FIELD_SEQ_TB</tspan><tspan
-	 id="tspan6785"
-	 sodipodi:role="line"
-	 y="-192.89471"
-	 x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286">V4L2_FIELD_INTERLACED_BT (misaligned)</tspan><tspan
-	 id="tspan6787"
-	 sodipodi:role="line"
-	 y="-294.93271"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_TB</tspan></text>
-<text
-       y="-528.771"
-       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464"
-       id="text4583"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4585"
-	 sodipodi:role="line"
-	 y="-528.771"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan></text>
-<text
-       y="-460.74561"
-       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054"
-       id="text4587"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4589"
-	 sodipodi:role="line"
-	 y="-460.74561"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan></text>
-<text
-       y="-392.72021"
-       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963"
-       id="text4591"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan4593"
-	 sodipodi:role="line"
-	 y="-392.72021"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
-<text
-       y="-588.2937"
-       x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096"
-       id="text5847"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan5849"
-	 sodipodi:role="line"
-	 y="-588.2937"
-	 x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096">Temporal order, top field first transmitted (e.g. BG/PAL)</tspan></text>
-<text
-       y="-86.604706"
-       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357"
-       id="text5851"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan5853"
-	 sodipodi:role="line"
-	 y="-86.604706"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357">V4L2_FIELD_SEQ_TB</tspan></text>
-<text
-       y="-192.89471"
-       x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286"
-       id="text5855"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan5857"
-	 sodipodi:role="line"
-	 y="-192.89471"
-	 x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286">V4L2_FIELD_INTERLACED_BT (misaligned)</tspan></text>
-<text
-       y="-294.93271"
-       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791"
-       id="text5859"
-       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan5861"
-	 sodipodi:role="line"
-	 y="-294.93271"
-	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_TB</tspan></text>
-<text
-       y="-324.69479"
-       x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048"
-       id="text7131"
-       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan7133"
-	 sodipodi:role="line"
-	 y="-324.69479"
-	 x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048">v4l2_buffer.field:</tspan></text>
-<text
-       y="-311.9397"
-       x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338
-538.00385 543.04431 549.4624"
-       id="text7135"
-       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan7137"
-	 sodipodi:role="line"
-	 y="-311.9397"
-	 x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338
-538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text>
-</g></svg>
diff --git a/Documentation/media/uapi/v4l/format.rst b/Documentation/media/uapi/v4l/format.rst
deleted file mode 100644
index 9cdb296333b8..000000000000
--- a/Documentation/media/uapi/v4l/format.rst
+++ /dev/null
@@ -1,99 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _format:
-
-************
-Data Formats
-************
-
-
-Data Format Negotiation
-=======================
-
-Different devices exchange different kinds of data with applications,
-for example video images, raw or sliced VBI data, RDS datagrams. Even
-within one kind many different formats are possible, in particular there is an
-abundance of image formats. Although drivers must provide a default and
-the selection persists across closing and reopening a device,
-applications should always negotiate a data format before engaging in
-data exchange. Negotiation means the application asks for a particular
-format and the driver selects and reports the best the hardware can do
-to satisfy the request. Of course applications can also just query the
-current selection.
-
-A single mechanism exists to negotiate all data formats using the
-aggregate struct :c:type:`v4l2_format` and the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctls. Additionally the
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl can be used to examine
-what the hardware *could* do, without actually selecting a new data
-format. The data formats supported by the V4L2 API are covered in the
-respective device section in :ref:`devices`. For a closer look at
-image formats see :ref:`pixfmt`.
-
-The :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl is a major turning-point in the
-initialization sequence. Prior to this point multiple panel applications
-can access the same device concurrently to select the current input,
-change controls or modify other properties. The first :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
-assigns a logical stream (video data, VBI data etc.) exclusively to one
-file descriptor.
-
-Exclusive means no other application, more precisely no other file
-descriptor, can grab this stream or change device properties
-inconsistent with the negotiated parameters. A video standard change for
-example, when the new standard uses a different number of scan lines,
-can invalidate the selected image format. Therefore only the file
-descriptor owning the stream can make invalidating changes. Accordingly
-multiple file descriptors which grabbed different logical streams
-prevent each other from interfering with their settings. When for
-example video overlay is about to start or already in progress,
-simultaneous video capturing may be restricted to the same cropping and
-image size.
-
-When applications omit the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl its locking side
-effects are implied by the next step, the selection of an I/O method
-with the :ref:`VIDIOC_REQBUFS` ioctl or implicit
-with the first :ref:`read() <func-read>` or
-:ref:`write() <func-write>` call.
-
-Generally only one logical stream can be assigned to a file descriptor,
-the exception being drivers permitting simultaneous video capturing and
-overlay using the same file descriptor for compatibility with V4L and
-earlier versions of V4L2. Switching the logical stream or returning into
-"panel mode" is possible by closing and reopening the device. Drivers
-*may* support a switch using :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`.
-
-All drivers exchanging data with applications must support the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. Implementation of the
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is highly recommended but optional.
-
-
-Image Format Enumeration
-========================
-
-Apart of the generic format negotiation functions a special ioctl to
-enumerate all image formats supported by video capture, overlay or
-output devices is available. [#f1]_
-
-The :ref:`VIDIOC_ENUM_FMT` ioctl must be supported
-by all drivers exchanging image data with applications.
-
-.. important::
-
-    Drivers are not supposed to convert image formats in kernel space.
-    They must enumerate only formats directly supported by the hardware.
-    If necessary driver writers should publish an example conversion
-    routine or library for integration into applications.
-
-.. [#f1]
-   Enumerating formats an application has no a-priori knowledge of
-   (otherwise it could explicitly ask for them and need not enumerate)
-   seems useless, but there are applications serving as proxy between
-   drivers and the actual video applications for which this is useful.
diff --git a/Documentation/media/uapi/v4l/func-close.rst b/Documentation/media/uapi/v4l/func-close.rst
deleted file mode 100644
index 1a56811b827e..000000000000
--- a/Documentation/media/uapi/v4l/func-close.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _func-close:
-
-************
-V4L2 close()
-************
-
-Name
-====
-
-v4l2-close - Close a V4L2 device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-
-
-.. c:function:: int close( int fd )
-    :name: v4l2-close
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-
-Description
-===========
-
-Closes the device. Any I/O in progress is terminated and resources
-associated with the file descriptor are freed. However data format
-parameters, current input or output, control values or other properties
-remain unchanged.
-
-
-Return Value
-============
-
-The function returns 0 on success, -1 on failure and the ``errno`` is
-set appropriately. Possible error codes:
-
-EBADF
-    ``fd`` is not a valid open file descriptor.
diff --git a/Documentation/media/uapi/v4l/func-ioctl.rst b/Documentation/media/uapi/v4l/func-ioctl.rst
deleted file mode 100644
index e7a8cf62752e..000000000000
--- a/Documentation/media/uapi/v4l/func-ioctl.rst
+++ /dev/null
@@ -1,69 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _func-ioctl:
-
-************
-V4L2 ioctl()
-************
-
-Name
-====
-
-v4l2-ioctl - Program a V4L2 device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <sys/ioctl.h>
-
-
-.. c:function:: int ioctl( int fd, int request, void *argp )
-    :name: v4l2-ioctl
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``request``
-    V4L2 ioctl request code as defined in the ``videodev2.h`` header
-    file, for example VIDIOC_QUERYCAP.
-
-``argp``
-    Pointer to a function parameter, usually a structure.
-
-
-Description
-===========
-
-The :ref:`ioctl() <func-ioctl>` function is used to program V4L2 devices. The
-argument ``fd`` must be an open file descriptor. An ioctl ``request``
-has encoded in it whether the argument is an input, output or read/write
-parameter, and the size of the argument ``argp`` in bytes. Macros and
-defines specifying V4L2 ioctl requests are located in the
-``videodev2.h`` header file. Applications should use their own copy, not
-include the version in the kernel sources on the system they compile on.
-All V4L2 ioctl requests, their respective function and parameters are
-specified in :ref:`user-func`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-When an ioctl that takes an output or read/write parameter fails, the
-parameter remains unmodified.
diff --git a/Documentation/media/uapi/v4l/func-mmap.rst b/Documentation/media/uapi/v4l/func-mmap.rst
deleted file mode 100644
index 75985d80788a..000000000000
--- a/Documentation/media/uapi/v4l/func-mmap.rst
+++ /dev/null
@@ -1,148 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _func-mmap:
-
-***********
-V4L2 mmap()
-***********
-
-Name
-====
-
-v4l2-mmap - Map device memory into application address space
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-    #include <sys/mman.h>
-
-
-.. c:function:: void *mmap( void *start, size_t length, int prot, int flags, int fd, off_t offset )
-    :name: v4l2-mmap
-
-Arguments
-=========
-
-``start``
-    Map the buffer to this address in the application's address space.
-    When the ``MAP_FIXED`` flag is specified, ``start`` must be a
-    multiple of the pagesize and mmap will fail when the specified
-    address cannot be used. Use of this option is discouraged;
-    applications should just specify a ``NULL`` pointer here.
-
-``length``
-    Length of the memory area to map. This must be the same value as
-    returned by the driver in the struct
-    :c:type:`v4l2_buffer` ``length`` field for the
-    single-planar API, and the same value as returned by the driver in
-    the struct :c:type:`v4l2_plane` ``length`` field for
-    the multi-planar API.
-
-``prot``
-    The ``prot`` argument describes the desired memory protection.
-    Regardless of the device type and the direction of data exchange it
-    should be set to ``PROT_READ`` | ``PROT_WRITE``, permitting read
-    and write access to image buffers. Drivers should support at least
-    this combination of flags.
-
-    .. note::
-
-      #. The Linux ``videobuf`` kernel module, which is used by some
-	 drivers supports only ``PROT_READ`` | ``PROT_WRITE``. When the
-	 driver does not support the desired protection, the
-	 :ref:`mmap() <func-mmap>` function fails.
-
-      #. Device memory accesses (e. g. the memory on a graphics card
-	 with video capturing hardware) may incur a performance penalty
-	 compared to main memory accesses, or reads may be significantly
-	 slower than writes or vice versa. Other I/O methods may be more
-	 efficient in such case.
-
-``flags``
-    The ``flags`` parameter specifies the type of the mapped object,
-    mapping options and whether modifications made to the mapped copy of
-    the page are private to the process or are to be shared with other
-    references.
-
-    ``MAP_FIXED`` requests that the driver selects no other address than
-    the one specified. If the specified address cannot be used,
-    :ref:`mmap() <func-mmap>` will fail. If ``MAP_FIXED`` is specified,
-    ``start`` must be a multiple of the pagesize. Use of this option is
-    discouraged.
-
-    One of the ``MAP_SHARED`` or ``MAP_PRIVATE`` flags must be set.
-    ``MAP_SHARED`` allows applications to share the mapped memory with
-    other (e. g. child-) processes.
-
-    .. note::
-
-       The Linux ``videobuf`` module  which is used by some
-       drivers supports only ``MAP_SHARED``. ``MAP_PRIVATE`` requests
-       copy-on-write semantics. V4L2 applications should not set the
-       ``MAP_PRIVATE``, ``MAP_DENYWRITE``, ``MAP_EXECUTABLE`` or ``MAP_ANON``
-       flags.
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``offset``
-    Offset of the buffer in device memory. This must be the same value
-    as returned by the driver in the struct
-    :c:type:`v4l2_buffer` ``m`` union ``offset`` field for
-    the single-planar API, and the same value as returned by the driver
-    in the struct :c:type:`v4l2_plane` ``m`` union
-    ``mem_offset`` field for the multi-planar API.
-
-
-Description
-===========
-
-The :ref:`mmap() <func-mmap>` function asks to map ``length`` bytes starting at
-``offset`` in the memory of the device specified by ``fd`` into the
-application address space, preferably at address ``start``. This latter
-address is a hint only, and is usually specified as 0.
-
-Suitable length and offset parameters are queried with the
-:ref:`VIDIOC_QUERYBUF` ioctl. Buffers must be
-allocated with the :ref:`VIDIOC_REQBUFS` ioctl
-before they can be queried.
-
-To unmap buffers the :ref:`munmap() <func-munmap>` function is used.
-
-
-Return Value
-============
-
-On success :ref:`mmap() <func-mmap>` returns a pointer to the mapped buffer. On
-error ``MAP_FAILED`` (-1) is returned, and the ``errno`` variable is set
-appropriately. Possible error codes are:
-
-EBADF
-    ``fd`` is not a valid file descriptor.
-
-EACCES
-    ``fd`` is not open for reading and writing.
-
-EINVAL
-    The ``start`` or ``length`` or ``offset`` are not suitable. (E. g.
-    they are too large, or not aligned on a ``PAGESIZE`` boundary.)
-
-    The ``flags`` or ``prot`` value is not supported.
-
-    No buffers have been allocated with the
-    :ref:`VIDIOC_REQBUFS` ioctl.
-
-ENOMEM
-    Not enough physical or virtual memory was available to complete the
-    request.
diff --git a/Documentation/media/uapi/v4l/func-munmap.rst b/Documentation/media/uapi/v4l/func-munmap.rst
deleted file mode 100644
index 0d472d86a036..000000000000
--- a/Documentation/media/uapi/v4l/func-munmap.rst
+++ /dev/null
@@ -1,65 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _func-munmap:
-
-*************
-V4L2 munmap()
-*************
-
-Name
-====
-
-v4l2-munmap - Unmap device memory
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-    #include <sys/mman.h>
-
-
-.. c:function:: int munmap( void *start, size_t length )
-    :name: v4l2-munmap
-
-Arguments
-=========
-
-``start``
-    Address of the mapped buffer as returned by the
-    :ref:`mmap() <func-mmap>` function.
-
-``length``
-    Length of the mapped buffer. This must be the same value as given to
-    :ref:`mmap() <func-mmap>` and returned by the driver in the struct
-    :c:type:`v4l2_buffer` ``length`` field for the
-    single-planar API and in the struct
-    :c:type:`v4l2_plane` ``length`` field for the
-    multi-planar API.
-
-
-Description
-===========
-
-Unmaps a previously with the :ref:`mmap() <func-mmap>` function mapped
-buffer and frees it, if possible.
-
-
-Return Value
-============
-
-On success :ref:`munmap() <func-munmap>` returns 0, on failure -1 and the
-``errno`` variable is set appropriately:
-
-EINVAL
-    The ``start`` or ``length`` is incorrect, or no buffers have been
-    mapped yet.
diff --git a/Documentation/media/uapi/v4l/func-open.rst b/Documentation/media/uapi/v4l/func-open.rst
deleted file mode 100644
index a3d149ce6635..000000000000
--- a/Documentation/media/uapi/v4l/func-open.rst
+++ /dev/null
@@ -1,90 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _func-open:
-
-***********
-V4L2 open()
-***********
-
-Name
-====
-
-v4l2-open - Open a V4L2 device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <fcntl.h>
-
-
-.. c:function:: int open( const char *device_name, int flags )
-    :name: v4l2-open
-
-Arguments
-=========
-
-``device_name``
-    Device to be opened.
-
-``flags``
-    Open flags. Access mode must be ``O_RDWR``. This is just a
-    technicality, input devices still support only reading and output
-    devices only writing.
-
-    When the ``O_NONBLOCK`` flag is given, the :ref:`read() <func-read>`
-    function and the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will
-    return the ``EAGAIN`` error code when no data is available or no
-    buffer is in the driver outgoing queue, otherwise these functions
-    block until data becomes available. All V4L2 drivers exchanging data
-    with applications must support the ``O_NONBLOCK`` flag.
-
-    Other flags have no effect.
-
-
-Description
-===========
-
-To open a V4L2 device applications call :ref:`open() <func-open>` with the
-desired device name. This function has no side effects; all data format
-parameters, current input or output, control values or other properties
-remain unchanged. At the first :ref:`open() <func-open>` call after loading the
-driver they will be reset to default values, drivers are never in an
-undefined state.
-
-
-Return Value
-============
-
-On success :ref:`open() <func-open>` returns the new file descriptor. On error
--1 is returned, and the ``errno`` variable is set appropriately.
-Possible error codes are:
-
-EACCES
-    The caller has no permission to access the device.
-
-EBUSY
-    The driver does not support multiple opens and the device is already
-    in use.
-
-ENXIO
-    No device corresponding to this device special file exists.
-
-ENOMEM
-    Not enough kernel memory was available to complete the request.
-
-EMFILE
-    The process already has the maximum number of files open.
-
-ENFILE
-    The limit on the total number of files open on the system has been
-    reached.
diff --git a/Documentation/media/uapi/v4l/func-poll.rst b/Documentation/media/uapi/v4l/func-poll.rst
deleted file mode 100644
index 4c579ed31358..000000000000
--- a/Documentation/media/uapi/v4l/func-poll.rst
+++ /dev/null
@@ -1,124 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _func-poll:
-
-***********
-V4L2 poll()
-***********
-
-Name
-====
-
-v4l2-poll - Wait for some event on a file descriptor
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <sys/poll.h>
-
-
-.. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout )
-    :name: v4l2-poll
-
-Arguments
-=========
-
-
-
-Description
-===========
-
-With the :ref:`poll() <func-poll>` function applications can suspend execution
-until the driver has captured data or is ready to accept data for
-output.
-
-When streaming I/O has been negotiated this function waits until a
-buffer has been filled by the capture device and can be dequeued with
-the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. For output devices this
-function waits until the device is ready to accept a new buffer to be
-queued up with the :ref:`VIDIOC_QBUF <VIDIOC_QBUF>` ioctl for
-display. When buffers are already in the outgoing queue of the driver
-(capture) or the incoming queue isn't full (display) the function
-returns immediately.
-
-On success :ref:`poll() <func-poll>` returns the number of file descriptors
-that have been selected (that is, file descriptors for which the
-``revents`` field of the respective :c:func:`struct pollfd` structure
-is non-zero). Capture devices set the ``POLLIN`` and ``POLLRDNORM``
-flags in the ``revents`` field, output devices the ``POLLOUT`` and
-``POLLWRNORM`` flags. When the function timed out it returns a value of
-zero, on failure it returns -1 and the ``errno`` variable is set
-appropriately. When the application did not call
-:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` the :ref:`poll() <func-poll>`
-function succeeds, but sets the ``POLLERR`` flag in the ``revents``
-field. When the application has called
-:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` for a capture device but
-hasn't yet called :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, the
-:ref:`poll() <func-poll>` function succeeds and sets the ``POLLERR`` flag in
-the ``revents`` field. For output devices this same situation will cause
-:ref:`poll() <func-poll>` to succeed as well, but it sets the ``POLLOUT`` and
-``POLLWRNORM`` flags in the ``revents`` field.
-
-If an event occurred (see :ref:`VIDIOC_DQEVENT`)
-then ``POLLPRI`` will be set in the ``revents`` field and
-:ref:`poll() <func-poll>` will return.
-
-When use of the :ref:`read() <func-read>` function has been negotiated and the
-driver does not capture yet, the :ref:`poll() <func-poll>` function starts
-capturing. When that fails it returns a ``POLLERR`` as above. Otherwise
-it waits until data has been captured and can be read. When the driver
-captures continuously (as opposed to, for example, still images) the
-function may return immediately.
-
-When use of the :ref:`write() <func-write>` function has been negotiated and the
-driver does not stream yet, the :ref:`poll() <func-poll>` function starts
-streaming. When that fails it returns a ``POLLERR`` as above. Otherwise
-it waits until the driver is ready for a non-blocking
-:ref:`write() <func-write>` call.
-
-If the caller is only interested in events (just ``POLLPRI`` is set in
-the ``events`` field), then :ref:`poll() <func-poll>` will *not* start
-streaming if the driver does not stream yet. This makes it possible to
-just poll for events and not for buffers.
-
-All drivers implementing the :ref:`read() <func-read>` or :ref:`write() <func-write>`
-function or streaming I/O must also support the :ref:`poll() <func-poll>`
-function.
-
-For more details see the :ref:`poll() <func-poll>` manual page.
-
-
-Return Value
-============
-
-On success, :ref:`poll() <func-poll>` returns the number structures which have
-non-zero ``revents`` fields, or zero if the call timed out. On error -1
-is returned, and the ``errno`` variable is set appropriately:
-
-EBADF
-    One or more of the ``ufds`` members specify an invalid file
-    descriptor.
-
-EBUSY
-    The driver does not support multiple read or write streams and the
-    device is already in use.
-
-EFAULT
-    ``ufds`` references an inaccessible memory area.
-
-EINTR
-    The call was interrupted by a signal.
-
-EINVAL
-    The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use
-    ``getrlimit()`` to obtain this value.
diff --git a/Documentation/media/uapi/v4l/func-read.rst b/Documentation/media/uapi/v4l/func-read.rst
deleted file mode 100644
index 14aca4d5e8fd..000000000000
--- a/Documentation/media/uapi/v4l/func-read.rst
+++ /dev/null
@@ -1,140 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _func-read:
-
-***********
-V4L2 read()
-***********
-
-Name
-====
-
-v4l2-read - Read from a V4L2 device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-
-
-.. c:function:: ssize_t read( int fd, void *buf, size_t count )
-    :name: v4l2-read
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``buf``
-   Buffer to be filled
-
-``count``
-  Max number of bytes to read
-
-Description
-===========
-
-:ref:`read() <func-read>` attempts to read up to ``count`` bytes from file
-descriptor ``fd`` into the buffer starting at ``buf``. The layout of the
-data in the buffer is discussed in the respective device interface
-section, see ##. If ``count`` is zero, :ref:`read() <func-read>` returns zero
-and has no other results. If ``count`` is greater than ``SSIZE_MAX``,
-the result is unspecified. Regardless of the ``count`` value each
-:ref:`read() <func-read>` call will provide at most one frame (two fields)
-worth of data.
-
-By default :ref:`read() <func-read>` blocks until data becomes available. When
-the ``O_NONBLOCK`` flag was given to the :ref:`open() <func-open>`
-function it returns immediately with an ``EAGAIN`` error code when no data
-is available. The :ref:`select() <func-select>` or
-:ref:`poll() <func-poll>` functions can always be used to suspend
-execution until data becomes available. All drivers supporting the
-:ref:`read() <func-read>` function must also support :ref:`select() <func-select>` and
-:ref:`poll() <func-poll>`.
-
-Drivers can implement read functionality in different ways, using a
-single or multiple buffers and discarding the oldest or newest frames
-once the internal buffers are filled.
-
-:ref:`read() <func-read>` never returns a "snapshot" of a buffer being filled.
-Using a single buffer the driver will stop capturing when the
-application starts reading the buffer until the read is finished. Thus
-only the period of the vertical blanking interval is available for
-reading, or the capture rate must fall below the nominal frame rate of
-the video standard.
-
-The behavior of :ref:`read() <func-read>` when called during the active picture
-period or the vertical blanking separating the top and bottom field
-depends on the discarding policy. A driver discarding the oldest frames
-keeps capturing into an internal buffer, continuously overwriting the
-previously, not read frame, and returns the frame being received at the
-time of the :ref:`read() <func-read>` call as soon as it is complete.
-
-A driver discarding the newest frames stops capturing until the next
-:ref:`read() <func-read>` call. The frame being received at :ref:`read() <func-read>`
-time is discarded, returning the following frame instead. Again this
-implies a reduction of the capture rate to one half or less of the
-nominal frame rate. An example of this model is the video read mode of
-the bttv driver, initiating a DMA to user memory when :ref:`read() <func-read>`
-is called and returning when the DMA finished.
-
-In the multiple buffer model drivers maintain a ring of internal
-buffers, automatically advancing to the next free buffer. This allows
-continuous capturing when the application can empty the buffers fast
-enough. Again, the behavior when the driver runs out of free buffers
-depends on the discarding policy.
-
-Applications can get and set the number of buffers used internally by
-the driver with the :ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and
-:ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` ioctls. They are optional,
-however. The discarding policy is not reported and cannot be changed.
-For minimum requirements see :ref:`devices`.
-
-
-Return Value
-============
-
-On success, the number of bytes read is returned. It is not an error if
-this number is smaller than the number of bytes requested, or the amount
-of data required for one frame. This may happen for example because
-:ref:`read() <func-read>` was interrupted by a signal. On error, -1 is
-returned, and the ``errno`` variable is set appropriately. In this case
-the next read will start at the beginning of a new frame. Possible error
-codes are:
-
-EAGAIN
-    Non-blocking I/O has been selected using O_NONBLOCK and no data was
-    immediately available for reading.
-
-EBADF
-    ``fd`` is not a valid file descriptor or is not open for reading, or
-    the process already has the maximum number of files open.
-
-EBUSY
-    The driver does not support multiple read streams and the device is
-    already in use.
-
-EFAULT
-    ``buf`` references an inaccessible memory area.
-
-EINTR
-    The call was interrupted by a signal before any data was read.
-
-EIO
-    I/O error. This indicates some hardware problem or a failure to
-    communicate with a remote device (USB camera etc.).
-
-EINVAL
-    The :ref:`read() <func-read>` function is not supported by this driver, not
-    on this device, or generally not on this type of device.
diff --git a/Documentation/media/uapi/v4l/func-select.rst b/Documentation/media/uapi/v4l/func-select.rst
deleted file mode 100644
index af5f1e31c0fb..000000000000
--- a/Documentation/media/uapi/v4l/func-select.rst
+++ /dev/null
@@ -1,127 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _func-select:
-
-*************
-V4L2 select()
-*************
-
-Name
-====
-
-v4l2-select - Synchronous I/O multiplexing
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <sys/time.h>
-    #include <sys/types.h>
-    #include <unistd.h>
-
-
-.. c:function:: int select( int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout )
-    :name: v4l2-select
-
-Arguments
-=========
-
-``nfds``
-  The highest-numbered file descriptor in any of the three sets, plus 1.
-
-``readfds``
-  File descriptions to be watched if a read() call won't block.
-
-``writefds``
-  File descriptions to be watched if a write() won't block.
-
-``exceptfds``
-  File descriptions to be watched for V4L2 events.
-
-``timeout``
-  Maximum time to wait.
-
-
-Description
-===========
-
-With the :ref:`select() <func-select>` function applications can suspend
-execution until the driver has captured data or is ready to accept data
-for output.
-
-When streaming I/O has been negotiated this function waits until a
-buffer has been filled or displayed and can be dequeued with the
-:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. When buffers are already in
-the outgoing queue of the driver the function returns immediately.
-
-On success :ref:`select() <func-select>` returns the total number of bits set in
-:c:func:`struct fd_set`. When the function timed out it returns
-a value of zero. On failure it returns -1 and the ``errno`` variable is
-set appropriately. When the application did not call
-:ref:`VIDIOC_QBUF` or
-:ref:`VIDIOC_STREAMON` yet the :ref:`select() <func-select>`
-function succeeds, setting the bit of the file descriptor in ``readfds``
-or ``writefds``, but subsequent :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`
-calls will fail. [#f1]_
-
-When use of the :ref:`read() <func-read>` function has been negotiated and the
-driver does not capture yet, the :ref:`select() <func-select>` function starts
-capturing. When that fails, :ref:`select() <func-select>` returns successful and
-a subsequent :ref:`read() <func-read>` call, which also attempts to start
-capturing, will return an appropriate error code. When the driver
-captures continuously (as opposed to, for example, still images) and
-data is already available the :ref:`select() <func-select>` function returns
-immediately.
-
-When use of the :ref:`write() <func-write>` function has been negotiated the
-:ref:`select() <func-select>` function just waits until the driver is ready for a
-non-blocking :ref:`write() <func-write>` call.
-
-All drivers implementing the :ref:`read() <func-read>` or :ref:`write() <func-write>`
-function or streaming I/O must also support the :ref:`select() <func-select>`
-function.
-
-For more details see the :ref:`select() <func-select>` manual page.
-
-
-Return Value
-============
-
-On success, :ref:`select() <func-select>` returns the number of descriptors
-contained in the three returned descriptor sets, which will be zero if
-the timeout expired. On error -1 is returned, and the ``errno`` variable
-is set appropriately; the sets and ``timeout`` are undefined. Possible
-error codes are:
-
-EBADF
-    One or more of the file descriptor sets specified a file descriptor
-    that is not open.
-
-EBUSY
-    The driver does not support multiple read or write streams and the
-    device is already in use.
-
-EFAULT
-    The ``readfds``, ``writefds``, ``exceptfds`` or ``timeout`` pointer
-    references an inaccessible memory area.
-
-EINTR
-    The call was interrupted by a signal.
-
-EINVAL
-    The ``nfds`` argument is less than zero or greater than
-    ``FD_SETSIZE``.
-
-.. [#f1]
-   The Linux kernel implements :ref:`select() <func-select>` like the
-   :ref:`poll() <func-poll>` function, but :ref:`select() <func-select>` cannot
-   return a ``POLLERR``.
diff --git a/Documentation/media/uapi/v4l/func-write.rst b/Documentation/media/uapi/v4l/func-write.rst
deleted file mode 100644
index 865129c726ad..000000000000
--- a/Documentation/media/uapi/v4l/func-write.rst
+++ /dev/null
@@ -1,91 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _func-write:
-
-************
-V4L2 write()
-************
-
-Name
-====
-
-v4l2-write - Write to a V4L2 device
-
-
-Synopsis
-========
-
-.. code-block:: c
-
-    #include <unistd.h>
-
-
-.. c:function:: ssize_t write( int fd, void *buf, size_t count )
-    :name: v4l2-write
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``buf``
-     Buffer with data to be written
-
-``count``
-    Number of bytes at the buffer
-
-Description
-===========
-
-:ref:`write() <func-write>` writes up to ``count`` bytes to the device
-referenced by the file descriptor ``fd`` from the buffer starting at
-``buf``. When the hardware outputs are not active yet, this function
-enables them. When ``count`` is zero, :ref:`write() <func-write>` returns 0
-without any other effect.
-
-When the application does not provide more data in time, the previous
-video frame, raw VBI image, sliced VPS or WSS data is displayed again.
-Sliced Teletext or Closed Caption data is not repeated, the driver
-inserts a blank line instead.
-
-
-Return Value
-============
-
-On success, the number of bytes written are returned. Zero indicates
-nothing was written. On error, -1 is returned, and the ``errno``
-variable is set appropriately. In this case the next write will start at
-the beginning of a new frame. Possible error codes are:
-
-EAGAIN
-    Non-blocking I/O has been selected using the
-    :ref:`O_NONBLOCK <func-open>` flag and no buffer space was
-    available to write the data immediately.
-
-EBADF
-    ``fd`` is not a valid file descriptor or is not open for writing.
-
-EBUSY
-    The driver does not support multiple write streams and the device is
-    already in use.
-
-EFAULT
-    ``buf`` references an inaccessible memory area.
-
-EINTR
-    The call was interrupted by a signal before any data was written.
-
-EIO
-    I/O error. This indicates some hardware problem.
-
-EINVAL
-    The :ref:`write() <func-write>` function is not supported by this driver,
-    not on this device, or generally not on this type of device.
diff --git a/Documentation/media/uapi/v4l/hist-v4l2.rst b/Documentation/media/uapi/v4l/hist-v4l2.rst
deleted file mode 100644
index 9e097f34cb74..000000000000
--- a/Documentation/media/uapi/v4l/hist-v4l2.rst
+++ /dev/null
@@ -1,1374 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _hist-v4l2:
-
-***********************
-Changes of the V4L2 API
-***********************
-
-Soon after the V4L API was added to the kernel it was criticised as too
-inflexible. In August 1998 Bill Dirks proposed a number of improvements
-and began to work on documentation, example drivers and applications.
-With the help of other volunteers this eventually became the V4L2 API,
-not just an extension but a replacement for the V4L API. However it took
-another four years and two stable kernel releases until the new API was
-finally accepted for inclusion into the kernel in its present form.
-
-
-Early Versions
-==============
-
-1998-08-20: First version.
-
-1998-08-27: The :ref:`select() <func-select>` function was introduced.
-
-1998-09-10: New video standard interface.
-
-1998-09-18: The ``VIDIOC_NONCAP`` ioctl was replaced by the otherwise
-meaningless ``O_TRUNC`` :ref:`open() <func-open>` flag, and the
-aliases ``O_NONCAP`` and ``O_NOIO`` were defined. Applications can set
-this flag if they intend to access controls only, as opposed to capture
-applications which need exclusive access. The ``VIDEO_STD_XXX``
-identifiers are now ordinals instead of flags, and the
-``video_std_construct()`` helper function takes id and
-transmission arguments.
-
-1998-09-28: Revamped video standard. Made video controls individually
-enumerable.
-
-1998-10-02: The ``id`` field was removed from struct
-struct ``video_standard`` and the color subcarrier fields were
-renamed. The :ref:`VIDIOC_QUERYSTD` ioctl was
-renamed to :ref:`VIDIOC_ENUMSTD`,
-:ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` to
-:ref:`VIDIOC_ENUMINPUT`. A first draft of the
-Codec API was released.
-
-1998-11-08: Many minor changes. Most symbols have been renamed. Some
-material changes to struct :c:type:`v4l2_capability`.
-
-1998-11-12: The read/write directon of some ioctls was misdefined.
-
-1998-11-14: ``V4L2_PIX_FMT_RGB24`` changed to ``V4L2_PIX_FMT_BGR24``,
-and ``V4L2_PIX_FMT_RGB32`` changed to ``V4L2_PIX_FMT_BGR32``. Audio
-controls are now accessible with the
-:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
-:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls under names starting
-with ``V4L2_CID_AUDIO``. The ``V4L2_MAJOR`` define was removed from
-``videodev.h`` since it was only used once in the ``videodev`` kernel
-module. The ``YUV422`` and ``YUV411`` planar image formats were added.
-
-1998-11-28: A few ioctl symbols changed. Interfaces for codecs and video
-output devices were added.
-
-1999-01-14: A raw VBI capture interface was added.
-
-1999-01-19: The ``VIDIOC_NEXTBUF`` ioctl was removed.
-
-
-V4L2 Version 0.16 1999-01-31
-============================
-
-1999-01-27: There is now one QBUF ioctl, VIDIOC_QWBUF and VIDIOC_QRBUF
-are gone. VIDIOC_QBUF takes a v4l2_buffer as a parameter. Added
-digital zoom (cropping) controls.
-
-
-V4L2 Version 0.18 1999-03-16
-============================
-
-Added a v4l to V4L2 ioctl compatibility layer to videodev.c. Driver
-writers, this changes how you implement your ioctl handler. See the
-Driver Writer's Guide. Added some more control id codes.
-
-
-V4L2 Version 0.19 1999-06-05
-============================
-
-1999-03-18: Fill in the category and catname fields of v4l2_queryctrl
-objects before passing them to the driver. Required a minor change to
-the VIDIOC_QUERYCTRL handlers in the sample drivers.
-
-1999-03-31: Better compatibility for v4l memory capture ioctls. Requires
-changes to drivers to fully support new compatibility features, see
-Driver Writer's Guide and v4l2cap.c. Added new control IDs:
-V4L2_CID_HFLIP, _VFLIP. Changed V4L2_PIX_FMT_YUV422P to _YUV422P,
-and _YUV411P to _YUV411P.
-
-1999-04-04: Added a few more control IDs.
-
-1999-04-07: Added the button control type.
-
-1999-05-02: Fixed a typo in videodev.h, and added the
-V4L2_CTRL_FLAG_GRAYED (later V4L2_CTRL_FLAG_GRABBED) flag.
-
-1999-05-20: Definition of VIDIOC_G_CTRL was wrong causing a
-malfunction of this ioctl.
-
-1999-06-05: Changed the value of V4L2_CID_WHITENESS.
-
-
-V4L2 Version 0.20 (1999-09-10)
-==============================
-
-Version 0.20 introduced a number of changes which were *not backward
-compatible* with 0.19 and earlier versions. Purpose of these changes was
-to simplify the API, while making it more extensible and following
-common Linux driver API conventions.
-
-1. Some typos in ``V4L2_FMT_FLAG`` symbols were fixed. struct
-   :c:type:`v4l2_clip` was changed for compatibility with
-   v4l. (1999-08-30)
-
-2. ``V4L2_TUNER_SUB_LANG1`` was added. (1999-09-05)
-
-3. All ioctl() commands that used an integer argument now take a pointer
-   to an integer. Where it makes sense, ioctls will return the actual
-   new value in the integer pointed to by the argument, a common
-   convention in the V4L2 API. The affected ioctls are: VIDIOC_PREVIEW,
-   VIDIOC_STREAMON, VIDIOC_STREAMOFF, VIDIOC_S_FREQ,
-   VIDIOC_S_INPUT, VIDIOC_S_OUTPUT, VIDIOC_S_EFFECT. For example
-
-
-   .. code-block:: c
-
-       err = ioctl (fd, VIDIOC_XXX, V4L2_XXX);
-
-   becomes
-
-
-   .. code-block:: c
-
-       int a = V4L2_XXX; err = ioctl(fd, VIDIOC_XXX, &a);
-
-4. All the different get- and set-format commands were swept into one
-   :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
-   :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl taking a union and a
-   type field selecting the union member as parameter. Purpose is to
-   simplify the API by eliminating several ioctls and to allow new and
-   driver private data streams without adding new ioctls.
-
-   This change obsoletes the following ioctls: ``VIDIOC_S_INFMT``,
-   ``VIDIOC_G_INFMT``, ``VIDIOC_S_OUTFMT``, ``VIDIOC_G_OUTFMT``,
-   ``VIDIOC_S_VBIFMT`` and ``VIDIOC_G_VBIFMT``. The image format
-   structure struct :c:type:`v4l2_format` was renamed to struct
-   :c:type:`v4l2_pix_format`, while struct
-   :c:type:`v4l2_format` is now the envelopping structure
-   for all format negotiations.
-
-5. Similar to the changes above, the ``VIDIOC_G_PARM`` and
-   ``VIDIOC_S_PARM`` ioctls were merged with ``VIDIOC_G_OUTPARM`` and
-   ``VIDIOC_S_OUTPARM``. A ``type`` field in the new struct
-   :c:type:`v4l2_streamparm` selects the respective
-   union member.
-
-   This change obsoletes the ``VIDIOC_G_OUTPARM`` and
-   ``VIDIOC_S_OUTPARM`` ioctls.
-
-6. Control enumeration was simplified, and two new control flags were
-   introduced and one dropped. The ``catname`` field was replaced by a
-   ``group`` field.
-
-   Drivers can now flag unsupported and temporarily unavailable controls
-   with ``V4L2_CTRL_FLAG_DISABLED`` and ``V4L2_CTRL_FLAG_GRABBED``
-   respectively. The ``group`` name indicates a possibly narrower
-   classification than the ``category``. In other words, there may be
-   multiple groups within a category. Controls within a group would
-   typically be drawn within a group box. Controls in different
-   categories might have a greater separation, or may even appear in
-   separate windows.
-
-7. The struct :c:type:`v4l2_buffer` ``timestamp`` was
-   changed to a 64 bit integer, containing the sampling or output time
-   of the frame in nanoseconds. Additionally timestamps will be in
-   absolute system time, not starting from zero at the beginning of a
-   stream. The data type name for timestamps is stamp_t, defined as a
-   signed 64-bit integer. Output devices should not send a buffer out
-   until the time in the timestamp field has arrived. I would like to
-   follow SGI's lead, and adopt a multimedia timestamping system like
-   their UST (Unadjusted System Time). See
-   http://web.archive.org/web/\*/http://reality.sgi.com
-   /cpirazzi_engr/lg/time/intro.html. UST uses timestamps that are
-   64-bit signed integers (not struct timeval's) and given in nanosecond
-   units. The UST clock starts at zero when the system is booted and
-   runs continuously and uniformly. It takes a little over 292 years for
-   UST to overflow. There is no way to set the UST clock. The regular
-   Linux time-of-day clock can be changed periodically, which would
-   cause errors if it were being used for timestamping a multimedia
-   stream. A real UST style clock will require some support in the
-   kernel that is not there yet. But in anticipation, I will change the
-   timestamp field to a 64-bit integer, and I will change the
-   v4l2_masterclock_gettime() function (used only by drivers) to
-   return a 64-bit integer.
-
-8. A ``sequence`` field was added to struct
-   :c:type:`v4l2_buffer`. The ``sequence`` field counts
-   captured frames, it is ignored by output devices. When a capture
-   driver drops a frame, the sequence number of that frame is skipped.
-
-
-V4L2 Version 0.20 incremental changes
-=====================================
-
-1999-12-23: In struct :c:type:`v4l2_vbi_format` the
-``reserved1`` field became ``offset``. Previously drivers were required
-to clear the ``reserved1`` field.
-
-2000-01-13: The ``V4L2_FMT_FLAG_NOT_INTERLACED`` flag was added.
-
-2000-07-31: The ``linux/poll.h`` header is now included by
-``videodev.h`` for compatibility with the original ``videodev.h`` file.
-
-2000-11-20: ``V4L2_TYPE_VBI_OUTPUT`` and ``V4L2_PIX_FMT_Y41P`` were
-added.
-
-2000-11-25: ``V4L2_TYPE_VBI_INPUT`` was added.
-
-2000-12-04: A couple typos in symbol names were fixed.
-
-2001-01-18: To avoid namespace conflicts the ``fourcc`` macro defined in
-the ``videodev.h`` header file was renamed to ``v4l2_fourcc``.
-
-2001-01-25: A possible driver-level compatibility problem between the
-``videodev.h`` file in Linux 2.4.0 and the ``videodev.h`` file included
-in the ``videodevX`` patch was fixed. Users of an earlier version of
-``videodevX`` on Linux 2.4.0 should recompile their V4L and V4L2
-drivers.
-
-2001-01-26: A possible kernel-level incompatibility between the
-``videodev.h`` file in the ``videodevX`` patch and the ``videodev.h``
-file in Linux 2.2.x with devfs patches applied was fixed.
-
-2001-03-02: Certain V4L ioctls which pass data in both direction
-although they are defined with read-only parameter, did not work
-correctly through the backward compatibility layer. [Solution?]
-
-2001-04-13: Big endian 16-bit RGB formats were added.
-
-2001-09-17: New YUV formats and the
-:ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` and
-:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctls were added.
-(The old ``VIDIOC_G_FREQ`` and ``VIDIOC_S_FREQ`` ioctls did not take
-multiple tuners into account.)
-
-2000-09-18: ``V4L2_BUF_TYPE_VBI`` was added. This may *break
-compatibility* as the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctls may fail now if the struct
-struct ``v4l2_fmt`` ``type`` field does not contain
-``V4L2_BUF_TYPE_VBI``. In the documentation of the struct
-:c:type:`v4l2_vbi_format` ``offset`` field the
-ambiguous phrase "rising edge" was changed to "leading edge".
-
-
-V4L2 Version 0.20 2000-11-23
-============================
-
-A number of changes were made to the raw VBI interface.
-
-1. Figures clarifying the line numbering scheme were added to the V4L2
-   API specification. The ``start``\ [0] and ``start``\ [1] fields no
-   longer count line numbers beginning at zero. Rationale: a) The
-   previous definition was unclear. b) The ``start``\ [] values are
-   ordinal numbers. c) There is no point in inventing a new line
-   numbering scheme. We now use line number as defined by ITU-R, period.
-   Compatibility: Add one to the start values. Applications depending on
-   the previous semantics may not function correctly.
-
-2. The restriction "count[0] > 0 and count[1] > 0" has been relaxed to
-   "(count[0] + count[1]) > 0". Rationale: Drivers may allocate
-   resources at scan line granularity and some data services are
-   transmitted only on the first field. The comment that both ``count``
-   values will usually be equal is misleading and pointless and has been
-   removed. This change *breaks compatibility* with earlier versions:
-   Drivers may return ``EINVAL``, applications may not function correctly.
-
-3. Drivers are again permitted to return negative (unknown) start values
-   as proposed earlier. Why this feature was dropped is unclear. This
-   change may *break compatibility* with applications depending on the
-   start values being positive. The use of ``EBUSY`` and ``EINVAL``
-   error codes with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl was
-   clarified. The ``EBUSY`` error code was finally documented, and the
-   ``reserved2`` field which was previously mentioned only in the
-   ``videodev.h`` header file.
-
-4. New buffer types ``V4L2_TYPE_VBI_INPUT`` and ``V4L2_TYPE_VBI_OUTPUT``
-   were added. The former is an alias for the old ``V4L2_TYPE_VBI``, the
-   latter was missing in the ``videodev.h`` file.
-
-
-V4L2 Version 0.20 2002-07-25
-============================
-
-Added sliced VBI interface proposal.
-
-
-V4L2 in Linux 2.5.46, 2002-10
-=============================
-
-Around October-November 2002, prior to an announced feature freeze of
-Linux 2.5, the API was revised, drawing from experience with V4L2 0.20.
-This unnamed version was finally merged into Linux 2.5.46.
-
-1.  As specified in :ref:`related`, drivers must make related device
-    functions available under all minor device numbers.
-
-2.  The :ref:`open() <func-open>` function requires access mode
-    ``O_RDWR`` regardless of the device type. All V4L2 drivers
-    exchanging data with applications must support the ``O_NONBLOCK``
-    flag. The ``O_NOIO`` flag, a V4L2 symbol which aliased the
-    meaningless ``O_TRUNC`` to indicate accesses without data exchange
-    (panel applications) was dropped. Drivers must stay in "panel mode"
-    until the application attempts to initiate a data exchange, see
-    :ref:`open`.
-
-3.  The struct :c:type:`v4l2_capability` changed
-    dramatically. Note that also the size of the structure changed,
-    which is encoded in the ioctl request code, thus older V4L2 devices
-    will respond with an ``EINVAL`` error code to the new
-    :ref:`VIDIOC_QUERYCAP` ioctl.
-
-    There are new fields to identify the driver, a new RDS device
-    function ``V4L2_CAP_RDS_CAPTURE``, the ``V4L2_CAP_AUDIO`` flag
-    indicates if the device has any audio connectors, another I/O
-    capability ``V4L2_CAP_ASYNCIO`` can be flagged. In response to these
-    changes the ``type`` field became a bit set and was merged into the
-    ``flags`` field. ``V4L2_FLAG_TUNER`` was renamed to
-    ``V4L2_CAP_TUNER``, ``V4L2_CAP_VIDEO_OVERLAY`` replaced
-    ``V4L2_FLAG_PREVIEW`` and ``V4L2_CAP_VBI_CAPTURE`` and
-    ``V4L2_CAP_VBI_OUTPUT`` replaced ``V4L2_FLAG_DATA_SERVICE``.
-    ``V4L2_FLAG_READ`` and ``V4L2_FLAG_WRITE`` were merged into
-    ``V4L2_CAP_READWRITE``.
-
-    The redundant fields ``inputs``, ``outputs`` and ``audios`` were
-    removed. These properties can be determined as described in
-    :ref:`video` and :ref:`audio`.
-
-    The somewhat volatile and therefore barely useful fields
-    ``maxwidth``, ``maxheight``, ``minwidth``, ``minheight``,
-    ``maxframerate`` were removed. This information is available as
-    described in :ref:`format` and :ref:`standard`.
-
-    ``V4L2_FLAG_SELECT`` was removed. We believe the select() function
-    is important enough to require support of it in all V4L2 drivers
-    exchanging data with applications. The redundant
-    ``V4L2_FLAG_MONOCHROME`` flag was removed, this information is
-    available as described in :ref:`format`.
-
-4.  In struct :c:type:`v4l2_input` the ``assoc_audio``
-    field and the ``capability`` field and its only flag
-    ``V4L2_INPUT_CAP_AUDIO`` was replaced by the new ``audioset`` field.
-    Instead of linking one video input to one audio input this field
-    reports all audio inputs this video input combines with.
-
-    New fields are ``tuner`` (reversing the former link from tuners to
-    video inputs), ``std`` and ``status``.
-
-    Accordingly struct :c:type:`v4l2_output` lost its
-    ``capability`` and ``assoc_audio`` fields. ``audioset``,
-    ``modulator`` and ``std`` where added instead.
-
-5.  The struct :c:type:`v4l2_audio` field ``audio`` was
-    renamed to ``index``, for consistency with other structures. A new
-    capability flag ``V4L2_AUDCAP_STEREO`` was added to indicated if the
-    audio input in question supports stereo sound.
-    ``V4L2_AUDCAP_EFFECTS`` and the corresponding ``V4L2_AUDMODE`` flags
-    where removed. This can be easily implemented using controls.
-    (However the same applies to AVL which is still there.)
-
-    Again for consistency the struct
-    :c:type:`v4l2_audioout` field ``audio`` was renamed
-    to ``index``.
-
-6.  The struct :c:type:`v4l2_tuner` ``input`` field was
-    replaced by an ``index`` field, permitting devices with multiple
-    tuners. The link between video inputs and tuners is now reversed,
-    inputs point to their tuner. The ``std`` substructure became a
-    simple set (more about this below) and moved into struct
-    :c:type:`v4l2_input`. A ``type`` field was added.
-
-    Accordingly in struct :c:type:`v4l2_modulator` the
-    ``output`` was replaced by an ``index`` field.
-
-    In struct :c:type:`v4l2_frequency` the ``port``
-    field was replaced by a ``tuner`` field containing the respective
-    tuner or modulator index number. A tuner ``type`` field was added
-    and the ``reserved`` field became larger for future extensions
-    (satellite tuners in particular).
-
-7.  The idea of completely transparent video standards was dropped.
-    Experience showed that applications must be able to work with video
-    standards beyond presenting the user a menu. Instead of enumerating
-    supported standards with an ioctl applications can now refer to
-    standards by :ref:`v4l2_std_id <v4l2-std-id>` and symbols
-    defined in the ``videodev2.h`` header file. For details see
-    :ref:`standard`. The :ref:`VIDIOC_G_STD <VIDIOC_G_STD>` and
-    :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` now take a pointer to this
-    type as argument. :ref:`VIDIOC_QUERYSTD` was
-    added to autodetect the received standard, if the hardware has this
-    capability. In struct :c:type:`v4l2_standard` an
-    ``index`` field was added for
-    :ref:`VIDIOC_ENUMSTD`. A
-    :ref:`v4l2_std_id <v4l2-std-id>` field named ``id`` was added as
-    machine readable identifier, also replacing the ``transmission``
-    field. The misleading ``framerate`` field was renamed to
-    ``frameperiod``. The now obsolete ``colorstandard`` information,
-    originally needed to distguish between variations of standards, were
-    removed.
-
-    Struct ``v4l2_enumstd`` ceased to be.
-    :ref:`VIDIOC_ENUMSTD` now takes a pointer to a
-    struct :c:type:`v4l2_standard` directly. The
-    information which standards are supported by a particular video
-    input or output moved into struct :c:type:`v4l2_input`
-    and struct :c:type:`v4l2_output` fields named ``std``,
-    respectively.
-
-8.  The struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` fields
-    ``category`` and ``group`` did not catch on and/or were not
-    implemented as expected and therefore removed.
-
-9.  The :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl was added to
-    negotiate data formats as with
-    :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`, but without the overhead of
-    programming the hardware and regardless of I/O in progress.
-
-    In struct :c:type:`v4l2_format` the ``fmt`` union was
-    extended to contain struct :c:type:`v4l2_window`. All
-    image format negotiations are now possible with ``VIDIOC_G_FMT``,
-    ``VIDIOC_S_FMT`` and ``VIDIOC_TRY_FMT``; ioctl. The ``VIDIOC_G_WIN``
-    and ``VIDIOC_S_WIN`` ioctls to prepare for a video overlay were
-    removed. The ``type`` field changed to type enum
-    :c:type:`v4l2_buf_type` and the buffer type names
-    changed as follows.
-
-
-
-    .. flat-table::
-	:header-rows:  1
-	:stub-columns: 0
-
-	* - Old defines
-	  - enum :c:type:`v4l2_buf_type`
-	* - ``V4L2_BUF_TYPE_CAPTURE``
-	  - ``V4L2_BUF_TYPE_VIDEO_CAPTURE``
-	* - ``V4L2_BUF_TYPE_CODECIN``
-	  - Omitted for now
-	* - ``V4L2_BUF_TYPE_CODECOUT``
-	  - Omitted for now
-	* - ``V4L2_BUF_TYPE_EFFECTSIN``
-	  - Omitted for now
-	* - ``V4L2_BUF_TYPE_EFFECTSIN2``
-	  - Omitted for now
-	* - ``V4L2_BUF_TYPE_EFFECTSOUT``
-	  - Omitted for now
-	* - ``V4L2_BUF_TYPE_VIDEOOUT``
-	  - ``V4L2_BUF_TYPE_VIDEO_OUTPUT``
-	* - ``-``
-	  - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``
-	* - ``-``
-	  - ``V4L2_BUF_TYPE_VBI_CAPTURE``
-	* - ``-``
-	  - ``V4L2_BUF_TYPE_VBI_OUTPUT``
-	* - ``-``
-	  - ``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE``
-	* - ``-``
-	  - ``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``
-	* - ``V4L2_BUF_TYPE_PRIVATE_BASE``
-	  - ``V4L2_BUF_TYPE_PRIVATE`` (but this is deprecated)
-
-
-10. In struct :c:type:`v4l2_fmtdesc` a enum
-    :c:type:`v4l2_buf_type` field named ``type`` was
-    added as in struct :c:type:`v4l2_format`. The
-    ``VIDIOC_ENUM_FBUFFMT`` ioctl is no longer needed and was removed.
-    These calls can be replaced by
-    :ref:`VIDIOC_ENUM_FMT` with type
-    ``V4L2_BUF_TYPE_VIDEO_OVERLAY``.
-
-11. In struct :c:type:`v4l2_pix_format` the ``depth``
-    field was removed, assuming applications which recognize the format
-    by its four-character-code already know the color depth, and others
-    do not care about it. The same rationale lead to the removal of the
-    ``V4L2_FMT_FLAG_COMPRESSED`` flag. The
-    ``V4L2_FMT_FLAG_SWCONVECOMPRESSED`` flag was removed because drivers
-    are not supposed to convert images in kernel space. A user library
-    of conversion functions should be provided instead. The
-    ``V4L2_FMT_FLAG_BYTESPERLINE`` flag was redundant. Applications can
-    set the ``bytesperline`` field to zero to get a reasonable default.
-    Since the remaining flags were replaced as well, the ``flags`` field
-    itself was removed.
-
-    The interlace flags were replaced by a enum
-    :c:type:`v4l2_field` value in a newly added ``field``
-    field.
-
-
-
-    .. flat-table::
-	:header-rows:  1
-	:stub-columns: 0
-
-	* - Old flag
-	  - enum :c:type:`v4l2_field`
-	* - ``V4L2_FMT_FLAG_NOT_INTERLACED``
-	  - ?
-	* - ``V4L2_FMT_FLAG_INTERLACED`` = ``V4L2_FMT_FLAG_COMBINED``
-	  - ``V4L2_FIELD_INTERLACED``
-	* - ``V4L2_FMT_FLAG_TOPFIELD`` = ``V4L2_FMT_FLAG_ODDFIELD``
-	  - ``V4L2_FIELD_TOP``
-	* - ``V4L2_FMT_FLAG_BOTFIELD`` = ``V4L2_FMT_FLAG_EVENFIELD``
-	  - ``V4L2_FIELD_BOTTOM``
-	* - ``-``
-	  - ``V4L2_FIELD_SEQ_TB``
-	* - ``-``
-	  - ``V4L2_FIELD_SEQ_BT``
-	* - ``-``
-	  - ``V4L2_FIELD_ALTERNATE``
-
-
-    The color space flags were replaced by a enum
-    :c:type:`v4l2_colorspace` value in a newly added
-    ``colorspace`` field, where one of ``V4L2_COLORSPACE_SMPTE170M``,
-    ``V4L2_COLORSPACE_BT878``, ``V4L2_COLORSPACE_470_SYSTEM_M`` or
-    ``V4L2_COLORSPACE_470_SYSTEM_BG`` replaces ``V4L2_FMT_CS_601YUV``.
-
-12. In struct :c:type:`v4l2_requestbuffers` the
-    ``type`` field was properly defined as enum
-    :c:type:`v4l2_buf_type`. Buffer types changed as
-    mentioned above. A new ``memory`` field of type enum
-    :c:type:`v4l2_memory` was added to distinguish between
-    I/O methods using buffers allocated by the driver or the
-    application. See :ref:`io` for details.
-
-13. In struct :c:type:`v4l2_buffer` the ``type`` field was
-    properly defined as enum :c:type:`v4l2_buf_type`.
-    Buffer types changed as mentioned above. A ``field`` field of type
-    enum :c:type:`v4l2_field` was added to indicate if a
-    buffer contains a top or bottom field. The old field flags were
-    removed. Since no unadjusted system time clock was added to the
-    kernel as planned, the ``timestamp`` field changed back from type
-    stamp_t, an unsigned 64 bit integer expressing the sample time in
-    nanoseconds, to struct :c:type:`timeval`. With the addition
-    of a second memory mapping method the ``offset`` field moved into
-    union ``m``, and a new ``memory`` field of type enum
-    :c:type:`v4l2_memory` was added to distinguish between
-    I/O methods. See :ref:`io` for details.
-
-    The ``V4L2_BUF_REQ_CONTIG`` flag was used by the V4L compatibility
-    layer, after changes to this code it was no longer needed. The
-    ``V4L2_BUF_ATTR_DEVICEMEM`` flag would indicate if the buffer was
-    indeed allocated in device memory rather than DMA-able system
-    memory. It was barely useful and so was removed.
-
-14. In struct :c:type:`v4l2_framebuffer` the
-    ``base[3]`` array anticipating double- and triple-buffering in
-    off-screen video memory, however without defining a synchronization
-    mechanism, was replaced by a single pointer. The
-    ``V4L2_FBUF_CAP_SCALEUP`` and ``V4L2_FBUF_CAP_SCALEDOWN`` flags were
-    removed. Applications can determine this capability more accurately
-    using the new cropping and scaling interface. The
-    ``V4L2_FBUF_CAP_CLIPPING`` flag was replaced by
-    ``V4L2_FBUF_CAP_LIST_CLIPPING`` and
-    ``V4L2_FBUF_CAP_BITMAP_CLIPPING``.
-
-15. In struct :c:type:`v4l2_clip` the ``x``, ``y``,
-    ``width`` and ``height`` field moved into a ``c`` substructure of
-    type struct :c:type:`v4l2_rect`. The ``x`` and ``y``
-    fields were renamed to ``left`` and ``top``, i. e. offsets to a
-    context dependent origin.
-
-16. In struct :c:type:`v4l2_window` the ``x``, ``y``,
-    ``width`` and ``height`` field moved into a ``w`` substructure as
-    above. A ``field`` field of type :c:type:`v4l2_field` was added to
-    distinguish between field and frame (interlaced) overlay.
-
-17. The digital zoom interface, including struct
-    struct ``v4l2_zoomcap``, struct
-    struct ``v4l2_zoom``, ``V4L2_ZOOM_NONCAP`` and
-    ``V4L2_ZOOM_WHILESTREAMING`` was replaced by a new cropping and
-    scaling interface. The previously unused struct
-    struct :c:type:`v4l2_cropcap` and struct :c:type:`v4l2_crop`
-    where redefined for this purpose. See :ref:`crop` for details.
-
-18. In struct :c:type:`v4l2_vbi_format` the
-    ``SAMPLE_FORMAT`` field now contains a four-character-code as used
-    to identify video image formats and ``V4L2_PIX_FMT_GREY`` replaces
-    the ``V4L2_VBI_SF_UBYTE`` define. The ``reserved`` field was
-    extended.
-
-19. In struct :c:type:`v4l2_captureparm` the type of
-    the ``timeperframe`` field changed from unsigned long to struct
-    :c:type:`v4l2_fract`. This allows the accurate
-    expression of multiples of the NTSC-M frame rate 30000 / 1001. A new
-    field ``readbuffers`` was added to control the driver behaviour in
-    read I/O mode.
-
-    Similar changes were made to struct
-    :c:type:`v4l2_outputparm`.
-
-20. The struct ``v4l2_performance`` and
-    ``VIDIOC_G_PERF`` ioctl were dropped. Except when using the
-    :ref:`read/write I/O method <rw>`, which is limited anyway, this
-    information is already available to applications.
-
-21. The example transformation from RGB to YCbCr color space in the old
-    V4L2 documentation was inaccurate, this has been corrected in
-    :ref:`pixfmt`.
-
-
-V4L2 2003-06-19
-===============
-
-1. A new capability flag ``V4L2_CAP_RADIO`` was added for radio devices.
-   Prior to this change radio devices would identify solely by having
-   exactly one tuner whose type field reads ``V4L2_TUNER_RADIO``.
-
-2. An optional driver access priority mechanism was added, see
-   :ref:`app-pri` for details.
-
-3. The audio input and output interface was found to be incomplete.
-
-   Previously the :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` ioctl would
-   enumerate the available audio inputs. An ioctl to determine the
-   current audio input, if more than one combines with the current video
-   input, did not exist. So ``VIDIOC_G_AUDIO`` was renamed to
-   ``VIDIOC_G_AUDIO_OLD``, this ioctl was removed on Kernel 2.6.39. The
-   :ref:`VIDIOC_ENUMAUDIO` ioctl was added to
-   enumerate audio inputs, while
-   :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` now reports the current
-   audio input.
-
-   The same changes were made to
-   :ref:`VIDIOC_G_AUDOUT <VIDIOC_G_AUDOUT>` and
-   :ref:`VIDIOC_ENUMAUDOUT <VIDIOC_ENUMAUDOUT>`.
-
-   Until further the "videodev" module will automatically translate
-   between the old and new ioctls, but drivers and applications must be
-   updated to successfully compile again.
-
-4. The :ref:`VIDIOC_OVERLAY` ioctl was incorrectly
-   defined with write-read parameter. It was changed to write-only,
-   while the write-read version was renamed to ``VIDIOC_OVERLAY_OLD``.
-   The old ioctl was removed on Kernel 2.6.39. Until further the
-   "videodev" kernel module will automatically translate to the new
-   version, so drivers must be recompiled, but not applications.
-
-5. :ref:`overlay` incorrectly stated that clipping rectangles define
-   regions where the video can be seen. Correct is that clipping
-   rectangles define regions where *no* video shall be displayed and so
-   the graphics surface can be seen.
-
-6. The :ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` and
-   :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls were defined with
-   write-only parameter, inconsistent with other ioctls modifying their
-   argument. They were changed to write-read, while a ``_OLD`` suffix
-   was added to the write-only versions. The old ioctls were removed on
-   Kernel 2.6.39. Drivers and applications assuming a constant parameter
-   need an update.
-
-
-V4L2 2003-11-05
-===============
-
-1. In :ref:`pixfmt-rgb` the following pixel formats were incorrectly
-   transferred from Bill Dirks' V4L2 specification. Descriptions below
-   refer to bytes in memory, in ascending address order.
-
-
-
-   .. flat-table::
-       :header-rows:  1
-       :stub-columns: 0
-
-       * - Symbol
-	 - In this document prior to revision 0.5
-	 - Corrected
-       * - ``V4L2_PIX_FMT_RGB24``
-	 - B, G, R
-	 - R, G, B
-       * - ``V4L2_PIX_FMT_BGR24``
-	 - R, G, B
-	 - B, G, R
-       * - ``V4L2_PIX_FMT_RGB32``
-	 - B, G, R, X
-	 - R, G, B, X
-       * - ``V4L2_PIX_FMT_BGR32``
-	 - R, G, B, X
-	 - B, G, R, X
-
-
-   The ``V4L2_PIX_FMT_BGR24`` example was always correct.
-
-   In :ref:`v4l-image-properties` the mapping of the V4L
-   ``VIDEO_PALETTE_RGB24`` and ``VIDEO_PALETTE_RGB32`` formats to V4L2
-   pixel formats was accordingly corrected.
-
-2. Unrelated to the fixes above, drivers may still interpret some V4L2
-   RGB pixel formats differently. These issues have yet to be addressed,
-   for details see :ref:`pixfmt-rgb`.
-
-
-V4L2 in Linux 2.6.6, 2004-05-09
-===============================
-
-1. The :ref:`VIDIOC_CROPCAP` ioctl was incorrectly
-   defined with read-only parameter. It is now defined as write-read
-   ioctl, while the read-only version was renamed to
-   ``VIDIOC_CROPCAP_OLD``. The old ioctl was removed on Kernel 2.6.39.
-
-
-V4L2 in Linux 2.6.8
-===================
-
-1. A new field ``input`` (former ``reserved[0]``) was added to the
-   struct :c:type:`v4l2_buffer` structure. Purpose of this
-   field is to alternate between video inputs (e. g. cameras) in step
-   with the video capturing process. This function must be enabled with
-   the new ``V4L2_BUF_FLAG_INPUT`` flag. The ``flags`` field is no
-   longer read-only.
-
-
-V4L2 spec erratum 2004-08-01
-============================
-
-1. The return value of the :ref:`func-open` function was incorrectly
-   documented.
-
-2. Audio output ioctls end in -AUDOUT, not -AUDIOOUT.
-
-3. In the Current Audio Input example the ``VIDIOC_G_AUDIO`` ioctl took
-   the wrong argument.
-
-4. The documentation of the :ref:`VIDIOC_QBUF` and
-   :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctls did not mention the
-   struct :c:type:`v4l2_buffer` ``memory`` field. It was
-   also missing from examples. Also on the ``VIDIOC_DQBUF`` page the ``EIO``
-   error code was not documented.
-
-
-V4L2 in Linux 2.6.14
-====================
-
-1. A new sliced VBI interface was added. It is documented in
-   :ref:`sliced` and replaces the interface first proposed in V4L2
-   specification 0.8.
-
-
-V4L2 in Linux 2.6.15
-====================
-
-1. The :ref:`VIDIOC_LOG_STATUS` ioctl was added.
-
-2. New video standards ``V4L2_STD_NTSC_443``, ``V4L2_STD_SECAM_LC``,
-   ``V4L2_STD_SECAM_DK`` (a set of SECAM D, K and K1), and
-   ``V4L2_STD_ATSC`` (a set of ``V4L2_STD_ATSC_8_VSB`` and
-   ``V4L2_STD_ATSC_16_VSB``) were defined. Note the ``V4L2_STD_525_60``
-   set now includes ``V4L2_STD_NTSC_443``. See also
-   :ref:`v4l2-std-id`.
-
-3. The ``VIDIOC_G_COMP`` and ``VIDIOC_S_COMP`` ioctl were renamed to
-   ``VIDIOC_G_MPEGCOMP`` and ``VIDIOC_S_MPEGCOMP`` respectively. Their
-   argument was replaced by a struct
-   ``v4l2_mpeg_compression`` pointer. (The
-   ``VIDIOC_G_MPEGCOMP`` and ``VIDIOC_S_MPEGCOMP`` ioctls where removed
-   in Linux 2.6.25.)
-
-
-V4L2 spec erratum 2005-11-27
-============================
-
-The capture example in :ref:`capture-example` called the
-:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` ioctl without checking if
-cropping is supported. In the video standard selection example in
-:ref:`standard` the :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` call used
-the wrong argument type.
-
-
-V4L2 spec erratum 2006-01-10
-============================
-
-1. The ``V4L2_IN_ST_COLOR_KILL`` flag in struct
-   :c:type:`v4l2_input` not only indicates if the color
-   killer is enabled, but also if it is active. (The color killer
-   disables color decoding when it detects no color in the video signal
-   to improve the image quality.)
-
-2. :ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` is a write-read ioctl, not
-   write-only as stated on its reference page. The ioctl changed in 2003
-   as noted above.
-
-
-V4L2 spec erratum 2006-02-03
-============================
-
-1. In struct :c:type:`v4l2_captureparm` and struct
-   :c:type:`v4l2_outputparm` the ``timeperframe``
-   field gives the time in seconds, not microseconds.
-
-
-V4L2 spec erratum 2006-02-04
-============================
-
-1. The ``clips`` field in struct :c:type:`v4l2_window`
-   must point to an array of struct :c:type:`v4l2_clip`, not
-   a linked list, because drivers ignore the struct
-   struct :c:type:`v4l2_clip`. ``next`` pointer.
-
-
-V4L2 in Linux 2.6.17
-====================
-
-1. New video standard macros were added: ``V4L2_STD_NTSC_M_KR`` (NTSC M
-   South Korea), and the sets ``V4L2_STD_MN``, ``V4L2_STD_B``,
-   ``V4L2_STD_GH`` and ``V4L2_STD_DK``. The ``V4L2_STD_NTSC`` and
-   ``V4L2_STD_SECAM`` sets now include ``V4L2_STD_NTSC_M_KR`` and
-   ``V4L2_STD_SECAM_LC`` respectively.
-
-2. A new ``V4L2_TUNER_MODE_LANG1_LANG2`` was defined to record both
-   languages of a bilingual program. The use of
-   ``V4L2_TUNER_MODE_STEREO`` for this purpose is deprecated now. See
-   the :ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>` section for details.
-
-
-V4L2 spec erratum 2006-09-23 (Draft 0.15)
-=========================================
-
-1. In various places ``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE`` and
-   ``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT`` of the sliced VBI interface were
-   not mentioned along with other buffer types.
-
-2. In :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` it was clarified that the struct
-   :c:type:`v4l2_audio` ``mode`` field is a flags field.
-
-3. :ref:`VIDIOC_QUERYCAP` did not mention the sliced VBI and radio
-   capability flags.
-
-4. In :ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` it was clarified that applications
-   must initialize the tuner ``type`` field of struct
-   :c:type:`v4l2_frequency` before calling
-   :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>`.
-
-5. The ``reserved`` array in struct
-   :c:type:`v4l2_requestbuffers` has 2 elements,
-   not 32.
-
-6. In :ref:`output` and :ref:`raw-vbi` the device file names
-   ``/dev/vout`` which never caught on were replaced by ``/dev/video``.
-
-7. With Linux 2.6.15 the possible range for VBI device minor numbers was
-   extended from 224-239 to 224-255. Accordingly device file names
-   ``/dev/vbi0`` to ``/dev/vbi31`` are possible now.
-
-
-V4L2 in Linux 2.6.18
-====================
-
-1. New ioctls :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
-   :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and
-   :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` were added, a
-   flag to skip unsupported controls with
-   :ref:`VIDIOC_QUERYCTRL`, new control types
-   ``V4L2_CTRL_TYPE_INTEGER64`` and ``V4L2_CTRL_TYPE_CTRL_CLASS``
-   (:c:type:`v4l2_ctrl_type`), and new control flags
-   ``V4L2_CTRL_FLAG_READ_ONLY``, ``V4L2_CTRL_FLAG_UPDATE``,
-   ``V4L2_CTRL_FLAG_INACTIVE`` and ``V4L2_CTRL_FLAG_SLIDER``
-   (:ref:`control-flags`). See :ref:`extended-controls` for details.
-
-
-V4L2 in Linux 2.6.19
-====================
-
-1. In struct :c:type:`v4l2_sliced_vbi_cap` a
-   buffer type field was added replacing a reserved field. Note on
-   architectures where the size of enum types differs from int types the
-   size of the structure changed. The
-   :ref:`VIDIOC_G_SLICED_VBI_CAP <VIDIOC_G_SLICED_VBI_CAP>` ioctl
-   was redefined from being read-only to write-read. Applications must
-   initialize the type field and clear the reserved fields now. These
-   changes may *break the compatibility* with older drivers and
-   applications.
-
-2. The ioctls :ref:`VIDIOC_ENUM_FRAMESIZES`
-   and
-   :ref:`VIDIOC_ENUM_FRAMEINTERVALS`
-   were added.
-
-3. A new pixel format ``V4L2_PIX_FMT_RGB444`` (:ref:`pixfmt-rgb`) was
-   added.
-
-
-V4L2 spec erratum 2006-10-12 (Draft 0.17)
-=========================================
-
-1. ``V4L2_PIX_FMT_HM12`` (:ref:`reserved-formats`) is a YUV 4:2:0, not
-   4:2:2 format.
-
-
-V4L2 in Linux 2.6.21
-====================
-
-1. The ``videodev2.h`` header file is now dual licensed under GNU
-   General Public License version two or later, and under a 3-clause
-   BSD-style license.
-
-
-V4L2 in Linux 2.6.22
-====================
-
-1. Two new field orders ``V4L2_FIELD_INTERLACED_TB`` and
-   ``V4L2_FIELD_INTERLACED_BT`` were added. See :c:type:`v4l2_field` for
-   details.
-
-2. Three new clipping/blending methods with a global or straight or
-   inverted local alpha value were added to the video overlay interface.
-   See the description of the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`
-   and :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctls for details.
-
-   A new ``global_alpha`` field was added to
-   :c:type:`v4l2_window`, extending the structure. This
-   may *break compatibility* with applications using a struct
-   struct :c:type:`v4l2_window` directly. However the
-   :ref:`VIDIOC_G/S/TRY_FMT <VIDIOC_G_FMT>` ioctls, which take a
-   pointer to a :c:type:`v4l2_format` parent structure
-   with padding bytes at the end, are not affected.
-
-3. The format of the ``chromakey`` field in struct
-   :c:type:`v4l2_window` changed from "host order RGB32"
-   to a pixel value in the same format as the framebuffer. This may
-   *break compatibility* with existing applications. Drivers supporting
-   the "host order RGB32" format are not known.
-
-
-V4L2 in Linux 2.6.24
-====================
-
-1. The pixel formats ``V4L2_PIX_FMT_PAL8``, ``V4L2_PIX_FMT_YUV444``,
-   ``V4L2_PIX_FMT_YUV555``, ``V4L2_PIX_FMT_YUV565`` and
-   ``V4L2_PIX_FMT_YUV32`` were added.
-
-
-V4L2 in Linux 2.6.25
-====================
-
-1. The pixel formats :ref:`V4L2_PIX_FMT_Y16 <V4L2-PIX-FMT-Y16>` and
-   :ref:`V4L2_PIX_FMT_SBGGR16 <V4L2-PIX-FMT-SBGGR16>` were added.
-
-2. New :ref:`controls <control>` ``V4L2_CID_POWER_LINE_FREQUENCY``,
-   ``V4L2_CID_HUE_AUTO``, ``V4L2_CID_WHITE_BALANCE_TEMPERATURE``,
-   ``V4L2_CID_SHARPNESS`` and ``V4L2_CID_BACKLIGHT_COMPENSATION`` were
-   added. The controls ``V4L2_CID_BLACK_LEVEL``, ``V4L2_CID_WHITENESS``,
-   ``V4L2_CID_HCENTER`` and ``V4L2_CID_VCENTER`` were deprecated.
-
-3. A :ref:`Camera controls class <camera-controls>` was added, with
-   the new controls ``V4L2_CID_EXPOSURE_AUTO``,
-   ``V4L2_CID_EXPOSURE_ABSOLUTE``, ``V4L2_CID_EXPOSURE_AUTO_PRIORITY``,
-   ``V4L2_CID_PAN_RELATIVE``, ``V4L2_CID_TILT_RELATIVE``,
-   ``V4L2_CID_PAN_RESET``, ``V4L2_CID_TILT_RESET``,
-   ``V4L2_CID_PAN_ABSOLUTE``, ``V4L2_CID_TILT_ABSOLUTE``,
-   ``V4L2_CID_FOCUS_ABSOLUTE``, ``V4L2_CID_FOCUS_RELATIVE`` and
-   ``V4L2_CID_FOCUS_AUTO``.
-
-4. The ``VIDIOC_G_MPEGCOMP`` and ``VIDIOC_S_MPEGCOMP`` ioctls, which
-   were superseded by the :ref:`extended controls <extended-controls>`
-   interface in Linux 2.6.18, where finally removed from the
-   ``videodev2.h`` header file.
-
-
-V4L2 in Linux 2.6.26
-====================
-
-1. The pixel formats ``V4L2_PIX_FMT_Y16`` and ``V4L2_PIX_FMT_SBGGR16``
-   were added.
-
-2. Added user controls ``V4L2_CID_CHROMA_AGC`` and
-   ``V4L2_CID_COLOR_KILLER``.
-
-
-V4L2 in Linux 2.6.27
-====================
-
-1. The :ref:`VIDIOC_S_HW_FREQ_SEEK` ioctl
-   and the ``V4L2_CAP_HW_FREQ_SEEK`` capability were added.
-
-2. The pixel formats ``V4L2_PIX_FMT_YVYU``, ``V4L2_PIX_FMT_PCA501``,
-   ``V4L2_PIX_FMT_PCA505``, ``V4L2_PIX_FMT_PCA508``,
-   ``V4L2_PIX_FMT_PCA561``, ``V4L2_PIX_FMT_SGBRG8``,
-   ``V4L2_PIX_FMT_PAC207`` and ``V4L2_PIX_FMT_PJPG`` were added.
-
-
-V4L2 in Linux 2.6.28
-====================
-
-1. Added ``V4L2_MPEG_AUDIO_ENCODING_AAC`` and
-   ``V4L2_MPEG_AUDIO_ENCODING_AC3`` MPEG audio encodings.
-
-2. Added ``V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC`` MPEG video encoding.
-
-3. The pixel formats ``V4L2_PIX_FMT_SGRBG10`` and
-   ``V4L2_PIX_FMT_SGRBG10DPCM8`` were added.
-
-
-V4L2 in Linux 2.6.29
-====================
-
-1. The ``VIDIOC_G_CHIP_IDENT`` ioctl was renamed to
-   ``VIDIOC_G_CHIP_IDENT_OLD`` and ``VIDIOC_DBG_G_CHIP_IDENT`` was
-   introduced in its place. The old struct
-   struct ``v4l2_chip_ident`` was renamed to
-   struct ``v4l2_chip_ident_old``.
-
-2. The pixel formats ``V4L2_PIX_FMT_VYUY``, ``V4L2_PIX_FMT_NV16`` and
-   ``V4L2_PIX_FMT_NV61`` were added.
-
-3. Added camera controls ``V4L2_CID_ZOOM_ABSOLUTE``,
-   ``V4L2_CID_ZOOM_RELATIVE``, ``V4L2_CID_ZOOM_CONTINUOUS`` and
-   ``V4L2_CID_PRIVACY``.
-
-
-V4L2 in Linux 2.6.30
-====================
-
-1. New control flag ``V4L2_CTRL_FLAG_WRITE_ONLY`` was added.
-
-2. New control ``V4L2_CID_COLORFX`` was added.
-
-
-V4L2 in Linux 2.6.32
-====================
-
-1. In order to be easier to compare a V4L2 API and a kernel version, now
-   V4L2 API is numbered using the Linux Kernel version numeration.
-
-2. Finalized the RDS capture API. See :ref:`rds` for more information.
-
-3. Added new capabilities for modulators and RDS encoders.
-
-4. Add description for libv4l API.
-
-5. Added support for string controls via new type
-   ``V4L2_CTRL_TYPE_STRING``.
-
-6. Added ``V4L2_CID_BAND_STOP_FILTER`` documentation.
-
-7. Added FM Modulator (FM TX) Extended Control Class:
-   ``V4L2_CTRL_CLASS_FM_TX`` and their Control IDs.
-
-8. Added FM Receiver (FM RX) Extended Control Class:
-   ``V4L2_CTRL_CLASS_FM_RX`` and their Control IDs.
-
-9. Added Remote Controller chapter, describing the default Remote
-   Controller mapping for media devices.
-
-
-V4L2 in Linux 2.6.33
-====================
-
-1. Added support for Digital Video timings in order to support HDTV
-   receivers and transmitters.
-
-
-V4L2 in Linux 2.6.34
-====================
-
-1. Added ``V4L2_CID_IRIS_ABSOLUTE`` and ``V4L2_CID_IRIS_RELATIVE``
-   controls to the :ref:`Camera controls class <camera-controls>`.
-
-
-V4L2 in Linux 2.6.37
-====================
-
-1. Remove the vtx (videotext/teletext) API. This API was no longer used
-   and no hardware exists to verify the API. Nor were any userspace
-   applications found that used it. It was originally scheduled for
-   removal in 2.6.35.
-
-
-V4L2 in Linux 2.6.39
-====================
-
-1. The old VIDIOC_*_OLD symbols and V4L1 support were removed.
-
-2. Multi-planar API added. Does not affect the compatibility of current
-   drivers and applications. See :ref:`multi-planar API <planar-apis>`
-   for details.
-
-
-V4L2 in Linux 3.1
-=================
-
-1. VIDIOC_QUERYCAP now returns a per-subsystem version instead of a
-   per-driver one.
-
-   Standardize an error code for invalid ioctl.
-
-   Added V4L2_CTRL_TYPE_BITMASK.
-
-
-V4L2 in Linux 3.2
-=================
-
-1. V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to
-   userspace.
-
-2. Add selection API for extended control over cropping and composing.
-   Does not affect the compatibility of current drivers and
-   applications. See :ref:`selection API <selection-api>` for details.
-
-
-V4L2 in Linux 3.3
-=================
-
-1. Added ``V4L2_CID_ALPHA_COMPONENT`` control to the
-   :ref:`User controls class <control>`.
-
-2. Added the device_caps field to struct v4l2_capabilities and added
-   the new V4L2_CAP_DEVICE_CAPS capability.
-
-
-V4L2 in Linux 3.4
-=================
-
-1. Added :ref:`JPEG compression control class <jpeg-controls>`.
-
-2. Extended the DV Timings API:
-   :ref:`VIDIOC_ENUM_DV_TIMINGS`,
-   :ref:`VIDIOC_QUERY_DV_TIMINGS` and
-   :ref:`VIDIOC_DV_TIMINGS_CAP`.
-
-
-V4L2 in Linux 3.5
-=================
-
-1. Added integer menus, the new type will be
-   V4L2_CTRL_TYPE_INTEGER_MENU.
-
-2. Added selection API for V4L2 subdev interface:
-   :ref:`VIDIOC_SUBDEV_G_SELECTION` and
-   :ref:`VIDIOC_SUBDEV_S_SELECTION <VIDIOC_SUBDEV_G_SELECTION>`.
-
-3. Added ``V4L2_COLORFX_ANTIQUE``, ``V4L2_COLORFX_ART_FREEZE``,
-   ``V4L2_COLORFX_AQUA``, ``V4L2_COLORFX_SILHOUETTE``,
-   ``V4L2_COLORFX_SOLARIZATION``, ``V4L2_COLORFX_VIVID`` and
-   ``V4L2_COLORFX_ARBITRARY_CBCR`` menu items to the
-   ``V4L2_CID_COLORFX`` control.
-
-4. Added ``V4L2_CID_COLORFX_CBCR`` control.
-
-5. Added camera controls ``V4L2_CID_AUTO_EXPOSURE_BIAS``,
-   ``V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE``,
-   ``V4L2_CID_IMAGE_STABILIZATION``, ``V4L2_CID_ISO_SENSITIVITY``,
-   ``V4L2_CID_ISO_SENSITIVITY_AUTO``, ``V4L2_CID_EXPOSURE_METERING``,
-   ``V4L2_CID_SCENE_MODE``, ``V4L2_CID_3A_LOCK``,
-   ``V4L2_CID_AUTO_FOCUS_START``, ``V4L2_CID_AUTO_FOCUS_STOP``,
-   ``V4L2_CID_AUTO_FOCUS_STATUS`` and ``V4L2_CID_AUTO_FOCUS_RANGE``.
-
-
-V4L2 in Linux 3.6
-=================
-
-1. Replaced ``input`` in struct :c:type:`v4l2_buffer` by
-   ``reserved2`` and removed ``V4L2_BUF_FLAG_INPUT``.
-
-2. Added V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE
-   capabilities.
-
-3. Added support for frequency band enumerations:
-   :ref:`VIDIOC_ENUM_FREQ_BANDS`.
-
-
-V4L2 in Linux 3.9
-=================
-
-1. Added timestamp types to ``flags`` field in
-   struct :c:type:`v4l2_buffer`. See :ref:`buffer-flags`.
-
-2. Added ``V4L2_EVENT_CTRL_CH_RANGE`` control event changes flag. See
-   :ref:`ctrl-changes-flags`.
-
-
-V4L2 in Linux 3.10
-==================
-
-1. Removed obsolete and unused DV_PRESET ioctls VIDIOC_G_DV_PRESET,
-   VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and
-   VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output
-   capability flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS.
-
-2. Added new debugging ioctl
-   :ref:`VIDIOC_DBG_G_CHIP_INFO`.
-
-
-V4L2 in Linux 3.11
-==================
-
-1. Remove obsolete ``VIDIOC_DBG_G_CHIP_IDENT`` ioctl.
-
-
-V4L2 in Linux 3.14
-==================
-
-1. In struct :c:type:`v4l2_rect`, the type of ``width`` and
-   ``height`` fields changed from _s32 to _u32.
-
-
-V4L2 in Linux 3.15
-==================
-
-1. Added Software Defined Radio (SDR) Interface.
-
-
-V4L2 in Linux 3.16
-==================
-
-1. Added event V4L2_EVENT_SOURCE_CHANGE.
-
-
-V4L2 in Linux 3.17
-==================
-
-1. Extended struct :c:type:`v4l2_pix_format`. Added
-   format flags.
-
-2. Added compound control types and
-   :ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>`.
-
-
-V4L2 in Linux 3.18
-==================
-
-1. Added ``V4L2_CID_PAN_SPEED`` and ``V4L2_CID_TILT_SPEED`` camera
-   controls.
-
-
-V4L2 in Linux 3.19
-==================
-
-1. Rewrote Colorspace chapter, added new enum
-   :c:type:`v4l2_ycbcr_encoding` and enum
-   :c:type:`v4l2_quantization` fields to struct
-   :c:type:`v4l2_pix_format`, struct
-   :c:type:`v4l2_pix_format_mplane` and
-   struct :c:type:`v4l2_mbus_framefmt`.
-
-
-V4L2 in Linux 4.4
-=================
-
-1. Renamed ``V4L2_TUNER_ADC`` to ``V4L2_TUNER_SDR``. The use of
-   ``V4L2_TUNER_ADC`` is deprecated now.
-
-2. Added ``V4L2_CID_RF_TUNER_RF_GAIN`` RF Tuner control.
-
-3. Added transmitter support for Software Defined Radio (SDR) Interface.
-
-
-.. _other:
-
-Relation of V4L2 to other Linux multimedia APIs
-===============================================
-
-
-.. _xvideo:
-
-X Video Extension
------------------
-
-The X Video Extension (abbreviated XVideo or just Xv) is an extension of
-the X Window system, implemented for example by the XFree86 project. Its
-scope is similar to V4L2, an API to video capture and output devices for
-X clients. Xv allows applications to display live video in a window,
-send window contents to a TV output, and capture or output still images
-in XPixmaps [#f1]_. With their implementation XFree86 makes the extension
-available across many operating systems and architectures.
-
-Because the driver is embedded into the X server Xv has a number of
-advantages over the V4L2 :ref:`video overlay interface <overlay>`. The
-driver can easily determine the overlay target, i. e. visible graphics
-memory or off-screen buffers for a destructive overlay. It can program
-the RAMDAC for a non-destructive overlay, scaling or color-keying, or
-the clipping functions of the video capture hardware, always in sync
-with drawing operations or windows moving or changing their stacking
-order.
-
-To combine the advantages of Xv and V4L a special Xv driver exists in
-XFree86 and XOrg, just programming any overlay capable Video4Linux
-device it finds. To enable it ``/etc/X11/XF86Config`` must contain these
-lines:
-
-::
-
-    Section "Module"
-	Load "v4l"
-    EndSection
-
-As of XFree86 4.2 this driver still supports only V4L ioctls, however it
-should work just fine with all V4L2 devices through the V4L2
-backward-compatibility layer. Since V4L2 permits multiple opens it is
-possible (if supported by the V4L2 driver) to capture video while an X
-client requested video overlay. Restrictions of simultaneous capturing
-and overlay are discussed in :ref:`overlay` apply.
-
-Only marginally related to V4L2, XFree86 extended Xv to support hardware
-YUV to RGB conversion and scaling for faster video playback, and added
-an interface to MPEG-2 decoding hardware. This API is useful to display
-images captured with V4L2 devices.
-
-
-Digital Video
--------------
-
-V4L2 does not support digital terrestrial, cable or satellite broadcast.
-A separate project aiming at digital receivers exists. You can find its
-homepage at `https://linuxtv.org <https://linuxtv.org>`__. The Linux
-DVB API has no connection to the V4L2 API except that drivers for hybrid
-hardware may support both.
-
-
-Audio Interfaces
-----------------
-
-[to do - OSS/ALSA]
-
-
-.. _experimental:
-
-Experimental API Elements
-=========================
-
-The following V4L2 API elements are currently experimental and may
-change in the future.
-
--  :ref:`VIDIOC_DBG_G_REGISTER` and
-   :ref:`VIDIOC_DBG_S_REGISTER <VIDIOC_DBG_G_REGISTER>` ioctls.
-
--  :ref:`VIDIOC_DBG_G_CHIP_INFO` ioctl.
-
-
-.. _obsolete:
-
-Obsolete API Elements
-=====================
-
-The following V4L2 API elements were superseded by new interfaces and
-should not be implemented in new drivers.
-
--  ``VIDIOC_G_MPEGCOMP`` and ``VIDIOC_S_MPEGCOMP`` ioctls. Use Extended
-   Controls, :ref:`extended-controls`.
-
--  VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET,
-   VIDIOC_ENUM_DV_PRESETS and VIDIOC_QUERY_DV_PRESET ioctls. Use
-   the DV Timings API (:ref:`dv-timings`).
-
--  ``VIDIOC_SUBDEV_G_CROP`` and ``VIDIOC_SUBDEV_S_CROP`` ioctls. Use
-   ``VIDIOC_SUBDEV_G_SELECTION`` and ``VIDIOC_SUBDEV_S_SELECTION``,
-   :ref:`VIDIOC_SUBDEV_G_SELECTION`.
-
-.. [#f1]
-   This is not implemented in XFree86.
diff --git a/Documentation/media/uapi/v4l/hsv-formats.rst b/Documentation/media/uapi/v4l/hsv-formats.rst
deleted file mode 100644
index f52f8ba131f0..000000000000
--- a/Documentation/media/uapi/v4l/hsv-formats.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _hsv-formats:
-
-***********
-HSV Formats
-***********
-
-These formats store the color information of the image
-in a geometrical representation. The colors are mapped into a
-cylinder, where the angle is the HUE, the height is the VALUE
-and the distance to the center is the SATURATION. This is a very
-useful format for image segmentation algorithms.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    pixfmt-packed-hsv
diff --git a/Documentation/media/uapi/v4l/io.rst b/Documentation/media/uapi/v4l/io.rst
deleted file mode 100644
index 049a2530d3a2..000000000000
--- a/Documentation/media/uapi/v4l/io.rst
+++ /dev/null
@@ -1,58 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _io:
-
-############
-Input/Output
-############
-The V4L2 API defines several different methods to read from or write to
-a device. All drivers exchanging data with applications must support at
-least one of them.
-
-The classic I/O method using the :ref:`read() <func-read>` and
-:ref:`write() <func-write>` function is automatically selected after opening a
-V4L2 device. When the driver does not support this method attempts to
-read or write will fail at any time.
-
-Other methods must be negotiated. To select the streaming I/O method
-with memory mapped or user buffers applications call the
-:ref:`VIDIOC_REQBUFS` ioctl. The asynchronous I/O
-method is not defined yet.
-
-Video overlay can be considered another I/O method, although the
-application does not directly receive the image data. It is selected by
-initiating video overlay with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
-ioctl. For more information see :ref:`overlay`.
-
-Generally exactly one I/O method, including overlay, is associated with
-each file descriptor. The only exceptions are applications not
-exchanging data with a driver ("panel applications", see :ref:`open`)
-and drivers permitting simultaneous video capturing and overlay using
-the same file descriptor, for compatibility with V4L and earlier
-versions of V4L2.
-
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_REQBUFS` would permit this to some
-degree, but for simplicity drivers need not support switching the I/O
-method (after first switching away from read/write) other than by
-closing and reopening the device.
-
-The following sections describe the various I/O methods in more detail.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    rw
-    mmap
-    userp
-    dmabuf
-    async
-    buffer
-    field-order
diff --git a/Documentation/media/uapi/v4l/libv4l-introduction.rst b/Documentation/media/uapi/v4l/libv4l-introduction.rst
deleted file mode 100644
index 1b206d380d4b..000000000000
--- a/Documentation/media/uapi/v4l/libv4l-introduction.rst
+++ /dev/null
@@ -1,191 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _libv4l-introduction:
-
-************
-Introduction
-************
-
-libv4l is a collection of libraries which adds a thin abstraction layer
-on top of video4linux2 devices. The purpose of this (thin) layer is to
-make it easy for application writers to support a wide variety of
-devices without having to write separate code for different devices in
-the same class.
-
-An example of using libv4l is provided by
-:ref:`v4l2grab <v4l2grab-example>`.
-
-libv4l consists of 3 different libraries:
-
-
-libv4lconvert
-=============
-
-libv4lconvert is a library that converts several different pixelformats
-found in V4L2 drivers into a few common RGB and YUY formats.
-
-It currently accepts the following V4L2 driver formats:
-:ref:`V4L2_PIX_FMT_BGR24 <V4L2-PIX-FMT-BGR24>`,
-:ref:`V4L2_PIX_FMT_HM12 <V4L2-PIX-FMT-HM12>`,
-:ref:`V4L2_PIX_FMT_JPEG <V4L2-PIX-FMT-JPEG>`,
-:ref:`V4L2_PIX_FMT_MJPEG <V4L2-PIX-FMT-MJPEG>`,
-:ref:`V4L2_PIX_FMT_MR97310A <V4L2-PIX-FMT-MR97310A>`,
-:ref:`V4L2_PIX_FMT_OV511 <V4L2-PIX-FMT-OV511>`,
-:ref:`V4L2_PIX_FMT_OV518 <V4L2-PIX-FMT-OV518>`,
-:ref:`V4L2_PIX_FMT_PAC207 <V4L2-PIX-FMT-PAC207>`,
-:ref:`V4L2_PIX_FMT_PJPG <V4L2-PIX-FMT-PJPG>`,
-:ref:`V4L2_PIX_FMT_RGB24 <V4L2-PIX-FMT-RGB24>`,
-:ref:`V4L2_PIX_FMT_SBGGR8 <V4L2-PIX-FMT-SBGGR8>`,
-:ref:`V4L2_PIX_FMT_SGBRG8 <V4L2-PIX-FMT-SGBRG8>`,
-:ref:`V4L2_PIX_FMT_SGRBG8 <V4L2-PIX-FMT-SGRBG8>`,
-:ref:`V4L2_PIX_FMT_SN9C10X <V4L2-PIX-FMT-SN9C10X>`,
-:ref:`V4L2_PIX_FMT_SN9C20X_I420 <V4L2-PIX-FMT-SN9C20X-I420>`,
-:ref:`V4L2_PIX_FMT_SPCA501 <V4L2-PIX-FMT-SPCA501>`,
-:ref:`V4L2_PIX_FMT_SPCA505 <V4L2-PIX-FMT-SPCA505>`,
-:ref:`V4L2_PIX_FMT_SPCA508 <V4L2-PIX-FMT-SPCA508>`,
-:ref:`V4L2_PIX_FMT_SPCA561 <V4L2-PIX-FMT-SPCA561>`,
-:ref:`V4L2_PIX_FMT_SQ905C <V4L2-PIX-FMT-SQ905C>`,
-:ref:`V4L2_PIX_FMT_SRGGB8 <V4L2-PIX-FMT-SRGGB8>`,
-:ref:`V4L2_PIX_FMT_UYVY <V4L2-PIX-FMT-UYVY>`,
-:ref:`V4L2_PIX_FMT_YUV420 <V4L2-PIX-FMT-YUV420>`,
-:ref:`V4L2_PIX_FMT_YUYV <V4L2-PIX-FMT-YUYV>`,
-:ref:`V4L2_PIX_FMT_YVU420 <V4L2-PIX-FMT-YVU420>`, and
-:ref:`V4L2_PIX_FMT_YVYU <V4L2-PIX-FMT-YVYU>`.
-
-Later on libv4lconvert was expanded to also be able to do various video
-processing functions to improve webcam video quality. The video
-processing is split in to 2 parts: libv4lconvert/control and
-libv4lconvert/processing.
-
-The control part is used to offer video controls which can be used to
-control the video processing functions made available by
-libv4lconvert/processing. These controls are stored application wide
-(until reboot) by using a persistent shared memory object.
-
-libv4lconvert/processing offers the actual video processing
-functionality.
-
-
-libv4l1
-=======
-
-This library offers functions that can be used to quickly make v4l1
-applications work with v4l2 devices. These functions work exactly like
-the normal open/close/etc, except that libv4l1 does full emulation of
-the v4l1 api on top of v4l2 drivers, in case of v4l1 drivers it will
-just pass calls through.
-
-Since those functions are emulations of the old V4L1 API, it shouldn't
-be used for new applications.
-
-
-libv4l2
-=======
-
-This library should be used for all modern V4L2 applications.
-
-It provides handles to call V4L2 open/ioctl/close/poll methods. Instead
-of just providing the raw output of the device, it enhances the calls in
-the sense that it will use libv4lconvert to provide more video formats
-and to enhance the image quality.
-
-In most cases, libv4l2 just passes the calls directly through to the
-v4l2 driver, intercepting the calls to
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>`,
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`,
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`,
-:ref:`VIDIOC_ENUM_FRAMESIZES <VIDIOC_ENUM_FRAMESIZES>` and
-:ref:`VIDIOC_ENUM_FRAMEINTERVALS <VIDIOC_ENUM_FRAMEINTERVALS>` in
-order to emulate the formats
-:ref:`V4L2_PIX_FMT_BGR24 <V4L2-PIX-FMT-BGR24>`,
-:ref:`V4L2_PIX_FMT_RGB24 <V4L2-PIX-FMT-RGB24>`,
-:ref:`V4L2_PIX_FMT_YUV420 <V4L2-PIX-FMT-YUV420>`, and
-:ref:`V4L2_PIX_FMT_YVU420 <V4L2-PIX-FMT-YVU420>`, if they aren't
-available in the driver. :ref:`VIDIOC_ENUM_FMT <VIDIOC_ENUM_FMT>`
-keeps enumerating the hardware supported formats, plus the emulated
-formats offered by libv4l at the end.
-
-
-.. _libv4l-ops:
-
-Libv4l device control functions
--------------------------------
-
-The common file operation methods are provided by libv4l.
-
-Those functions operate just like the gcc function ``dup()`` and
-V4L2 functions
-:c:func:`open() <v4l2-open>`, :c:func:`close() <v4l2-close>`,
-:c:func:`ioctl() <v4l2-ioctl>`, :c:func:`read() <v4l2-read>`,
-:c:func:`mmap() <v4l2-mmap>` and :c:func:`munmap() <v4l2-munmap>`:
-
-.. c:function:: int v4l2_open(const char *file, int oflag, ...)
-
-   operates like the :c:func:`open() <v4l2-open>` function.
-
-.. c:function:: int v4l2_close(int fd)
-
-   operates like the :c:func:`close() <v4l2-close>` function.
-
-.. c:function:: int v4l2_dup(int fd)
-
-   operates like the libc ``dup()`` function, duplicating a file handler.
-
-.. c:function:: int v4l2_ioctl (int fd, unsigned long int request, ...)
-
-   operates like the :c:func:`ioctl() <v4l2-ioctl>` function.
-
-.. c:function:: int v4l2_read (int fd, void* buffer, size_t n)
-
-   operates like the :c:func:`read() <v4l2-read>` function.
-
-.. c:function:: void v4l2_mmap(void *start, size_t length, int prot, int flags, int fd, int64_t offset);
-
-   operates like the :c:func:`munmap() <v4l2-munmap>` function.
-
-.. c:function:: int v4l2_munmap(void *_start, size_t length);
-
-   operates like the :c:func:`munmap() <v4l2-munmap>` function.
-
-Those functions provide additional control:
-
-.. c:function:: int v4l2_fd_open(int fd, int v4l2_flags)
-
-   opens an already opened fd for further use through v4l2lib and possibly
-   modify libv4l2's default behavior through the ``v4l2_flags`` argument.
-   Currently, ``v4l2_flags`` can be ``V4L2_DISABLE_CONVERSION``, to disable
-   format conversion.
-
-.. c:function:: int v4l2_set_control(int fd, int cid, int value)
-
-   This function takes a value of 0 - 65535, and then scales that range to the
-   actual range of the given v4l control id, and then if the cid exists and is
-   not locked sets the cid to the scaled value.
-
-.. c:function:: int v4l2_get_control(int fd, int cid)
-
-   This function returns a value of 0 - 65535, scaled to from the actual range
-   of the given v4l control id. when the cid does not exist, could not be
-   accessed for some reason, or some error occurred 0 is returned.
-
-
-v4l1compat.so wrapper library
-=============================
-
-This library intercepts calls to
-:c:func:`open() <v4l2-open>`, :c:func:`close() <v4l2-close>`,
-:c:func:`ioctl() <v4l2-ioctl>`, :c:func:`mmap() <v4l2-mmap>` and
-:c:func:`munmap() <v4l2-munmap>`
-operations and redirects them to the libv4l counterparts, by using
-``LD_PRELOAD=/usr/lib/v4l1compat.so``. It also emulates V4L1 calls via V4L2
-API.
-
-It allows usage of binary legacy applications that still don't use
-libv4l.
diff --git a/Documentation/media/uapi/v4l/libv4l.rst b/Documentation/media/uapi/v4l/libv4l.rst
deleted file mode 100644
index d114fbf1ffa6..000000000000
--- a/Documentation/media/uapi/v4l/libv4l.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _libv4l:
-
-************************
-Libv4l Userspace Library
-************************
-
-
-.. toctree::
-    :maxdepth: 1
-
-    libv4l-introduction
diff --git a/Documentation/media/uapi/v4l/meta-formats.rst b/Documentation/media/uapi/v4l/meta-formats.rst
deleted file mode 100644
index 74c8659ee9d6..000000000000
--- a/Documentation/media/uapi/v4l/meta-formats.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _meta-formats:
-
-****************
-Metadata Formats
-****************
-
-These formats are used for the :ref:`metadata` interface only.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    pixfmt-meta-d4xx
-    pixfmt-meta-intel-ipu3
-    pixfmt-meta-uvc
-    pixfmt-meta-vsp1-hgo
-    pixfmt-meta-vsp1-hgt
-    pixfmt-meta-vivid
diff --git a/Documentation/media/uapi/v4l/mmap.rst b/Documentation/media/uapi/v4l/mmap.rst
deleted file mode 100644
index c47708bf2c87..000000000000
--- a/Documentation/media/uapi/v4l/mmap.rst
+++ /dev/null
@@ -1,292 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _mmap:
-
-******************************
-Streaming I/O (Memory Mapping)
-******************************
-
-Input and output devices support this I/O method when the
-``V4L2_CAP_STREAMING`` flag in the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl is set. There are two
-streaming methods, to determine if the memory mapping flavor is
-supported applications must call the :ref:`VIDIOC_REQBUFS` ioctl
-with the memory type set to ``V4L2_MEMORY_MMAP``.
-
-Streaming is an I/O method where only pointers to buffers are exchanged
-between application and driver, the data itself is not copied. Memory
-mapping is primarily intended to map buffers in device memory into the
-application's address space. Device memory can be for example the video
-memory on a graphics card with a video capture add-on. However, being
-the most efficient I/O method available for a long time, many other
-drivers support streaming as well, allocating buffers in DMA-able main
-memory.
-
-A driver can support many sets of buffers. Each set is identified by a
-unique buffer type value. The sets are independent and each set can hold
-a different type of data. To access different sets at the same time
-different file descriptors must be used. [#f1]_
-
-To allocate device buffers applications call the
-:ref:`VIDIOC_REQBUFS` ioctl with the desired number
-of buffers and buffer type, for example ``V4L2_BUF_TYPE_VIDEO_CAPTURE``.
-This ioctl can also be used to change the number of buffers or to free
-the allocated memory, provided none of the buffers are still mapped.
-
-Before applications can access the buffers they must map them into their
-address space with the :ref:`mmap() <func-mmap>` function. The
-location of the buffers in device memory can be determined with the
-:ref:`VIDIOC_QUERYBUF` ioctl. In the single-planar
-API case, the ``m.offset`` and ``length`` returned in a struct
-:c:type:`v4l2_buffer` are passed as sixth and second
-parameter to the :ref:`mmap() <func-mmap>` function. When using the
-multi-planar API, struct :c:type:`v4l2_buffer` contains an
-array of struct :c:type:`v4l2_plane` structures, each
-containing its own ``m.offset`` and ``length``. When using the
-multi-planar API, every plane of every buffer has to be mapped
-separately, so the number of calls to :ref:`mmap() <func-mmap>` should
-be equal to number of buffers times number of planes in each buffer. The
-offset and length values must not be modified. Remember, the buffers are
-allocated in physical memory, as opposed to virtual memory, which can be
-swapped out to disk. Applications should free the buffers as soon as
-possible with the :ref:`munmap() <func-munmap>` function.
-
-Example: Mapping buffers in the single-planar API
-=================================================
-
-.. code-block:: c
-
-    struct v4l2_requestbuffers reqbuf;
-    struct {
-	void *start;
-	size_t length;
-    } *buffers;
-    unsigned int i;
-
-    memset(&reqbuf, 0, sizeof(reqbuf));
-    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-    reqbuf.memory = V4L2_MEMORY_MMAP;
-    reqbuf.count = 20;
-
-    if (-1 == ioctl (fd, VIDIOC_REQBUFS, &reqbuf)) {
-	if (errno == EINVAL)
-	    printf("Video capturing or mmap-streaming is not supported\\n");
-	else
-	    perror("VIDIOC_REQBUFS");
-
-	exit(EXIT_FAILURE);
-    }
-
-    /* We want at least five buffers. */
-
-    if (reqbuf.count < 5) {
-	/* You may need to free the buffers here. */
-	printf("Not enough buffer memory\\n");
-	exit(EXIT_FAILURE);
-    }
-
-    buffers = calloc(reqbuf.count, sizeof(*buffers));
-    assert(buffers != NULL);
-
-    for (i = 0; i < reqbuf.count; i++) {
-	struct v4l2_buffer buffer;
-
-	memset(&buffer, 0, sizeof(buffer));
-	buffer.type = reqbuf.type;
-	buffer.memory = V4L2_MEMORY_MMAP;
-	buffer.index = i;
-
-	if (-1 == ioctl (fd, VIDIOC_QUERYBUF, &buffer)) {
-	    perror("VIDIOC_QUERYBUF");
-	    exit(EXIT_FAILURE);
-	}
-
-	buffers[i].length = buffer.length; /* remember for munmap() */
-
-	buffers[i].start = mmap(NULL, buffer.length,
-		    PROT_READ | PROT_WRITE, /* recommended */
-		    MAP_SHARED,             /* recommended */
-		    fd, buffer.m.offset);
-
-	if (MAP_FAILED == buffers[i].start) {
-	    /* If you do not exit here you should unmap() and free()
-	       the buffers mapped so far. */
-	    perror("mmap");
-	    exit(EXIT_FAILURE);
-	}
-    }
-
-    /* Cleanup. */
-
-    for (i = 0; i < reqbuf.count; i++)
-	munmap(buffers[i].start, buffers[i].length);
-
-
-Example: Mapping buffers in the multi-planar API
-================================================
-
-.. code-block:: c
-
-    struct v4l2_requestbuffers reqbuf;
-    /* Our current format uses 3 planes per buffer */
-    #define FMT_NUM_PLANES = 3
-
-    struct {
-	void *start[FMT_NUM_PLANES];
-	size_t length[FMT_NUM_PLANES];
-    } *buffers;
-    unsigned int i, j;
-
-    memset(&reqbuf, 0, sizeof(reqbuf));
-    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
-    reqbuf.memory = V4L2_MEMORY_MMAP;
-    reqbuf.count = 20;
-
-    if (ioctl(fd, VIDIOC_REQBUFS, &reqbuf) < 0) {
-	if (errno == EINVAL)
-	    printf("Video capturing or mmap-streaming is not supported\\n");
-	else
-	    perror("VIDIOC_REQBUFS");
-
-	exit(EXIT_FAILURE);
-    }
-
-    /* We want at least five buffers. */
-
-    if (reqbuf.count < 5) {
-	/* You may need to free the buffers here. */
-	printf("Not enough buffer memory\\n");
-	exit(EXIT_FAILURE);
-    }
-
-    buffers = calloc(reqbuf.count, sizeof(*buffers));
-    assert(buffers != NULL);
-
-    for (i = 0; i < reqbuf.count; i++) {
-	struct v4l2_buffer buffer;
-	struct v4l2_plane planes[FMT_NUM_PLANES];
-
-	memset(&buffer, 0, sizeof(buffer));
-	buffer.type = reqbuf.type;
-	buffer.memory = V4L2_MEMORY_MMAP;
-	buffer.index = i;
-	/* length in struct v4l2_buffer in multi-planar API stores the size
-	 * of planes array. */
-	buffer.length = FMT_NUM_PLANES;
-	buffer.m.planes = planes;
-
-	if (ioctl(fd, VIDIOC_QUERYBUF, &buffer) < 0) {
-	    perror("VIDIOC_QUERYBUF");
-	    exit(EXIT_FAILURE);
-	}
-
-	/* Every plane has to be mapped separately */
-	for (j = 0; j < FMT_NUM_PLANES; j++) {
-	    buffers[i].length[j] = buffer.m.planes[j].length; /* remember for munmap() */
-
-	    buffers[i].start[j] = mmap(NULL, buffer.m.planes[j].length,
-		     PROT_READ | PROT_WRITE, /* recommended */
-		     MAP_SHARED,             /* recommended */
-		     fd, buffer.m.planes[j].m.offset);
-
-	    if (MAP_FAILED == buffers[i].start[j]) {
-		/* If you do not exit here you should unmap() and free()
-		   the buffers and planes mapped so far. */
-		perror("mmap");
-		exit(EXIT_FAILURE);
-	    }
-	}
-    }
-
-    /* Cleanup. */
-
-    for (i = 0; i < reqbuf.count; i++)
-	for (j = 0; j < FMT_NUM_PLANES; j++)
-	    munmap(buffers[i].start[j], buffers[i].length[j]);
-
-Conceptually streaming drivers maintain two buffer queues, an incoming
-and an outgoing queue. They separate the synchronous capture or output
-operation locked to a video clock from the application which is subject
-to random disk or network delays and preemption by other processes,
-thereby reducing the probability of data loss. The queues are organized
-as FIFOs, buffers will be output in the order enqueued in the incoming
-FIFO, and were captured in the order dequeued from the outgoing FIFO.
-
-The driver may require a minimum number of buffers enqueued at all times
-to function, apart of this no limit exists on the number of buffers
-applications can enqueue in advance, or dequeue and process. They can
-also enqueue in a different order than buffers have been dequeued, and
-the driver can *fill* enqueued *empty* buffers in any order.  [#f2]_ The
-index number of a buffer (struct :c:type:`v4l2_buffer`
-``index``) plays no role here, it only identifies the buffer.
-
-Initially all mapped buffers are in dequeued state, inaccessible by the
-driver. For capturing applications it is customary to first enqueue all
-mapped buffers, then to start capturing and enter the read loop. Here
-the application waits until a filled buffer can be dequeued, and
-re-enqueues the buffer when the data is no longer needed. Output
-applications fill and enqueue buffers, when enough buffers are stacked
-up the output is started with :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`.
-In the write loop, when the application runs out of free buffers, it
-must wait until an empty buffer can be dequeued and reused.
-
-To enqueue and dequeue a buffer applications use the
-:ref:`VIVIOC_QBUF <VIDIOC_QBUF>` and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`
-ioctl. The status of a buffer being mapped, enqueued, full or empty can
-be determined at any time using the :ref:`VIDIOC_QUERYBUF` ioctl. Two
-methods exist to suspend execution of the application until one or more
-buffers can be dequeued.  By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`
-blocks when no buffer is in the outgoing queue. When the ``O_NONBLOCK``
-flag was given to the :ref:`open() <func-open>` function,
-:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN``
-error code when no buffer is available. The :ref:`select() <func-select>`
-or :ref:`poll() <func-poll>` functions are always available.
-
-To start and stop capturing or output applications call the
-:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF
-<VIDIOC_STREAMON>` ioctl.
-
-.. note:::ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`
-   removes all buffers from both queues as a side effect. Since there is
-   no notion of doing anything "now" on a multitasking system, if an
-   application needs to synchronize with another event it should examine
-   the struct ::c:type:`v4l2_buffer` ``timestamp`` of captured
-   or outputted buffers.
-
-Drivers implementing memory mapping I/O must support the
-:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, :ref:`VIDIOC_QUERYBUF
-<VIDIOC_QUERYBUF>`, :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_DQBUF
-<VIDIOC_QBUF>`, :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`
-and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls, the :ref:`mmap()
-<func-mmap>`, :ref:`munmap() <func-munmap>`, :ref:`select()
-<func-select>` and :ref:`poll() <func-poll>` function. [#f3]_
-
-[capture example]
-
-.. [#f1]
-   One could use one file descriptor and set the buffer type field
-   accordingly when calling :ref:`VIDIOC_QBUF` etc.,
-   but it makes the :ref:`select() <func-select>` function ambiguous. We also
-   like the clean approach of one file descriptor per logical stream.
-   Video overlay for example is also a logical stream, although the CPU
-   is not needed for continuous operation.
-
-.. [#f2]
-   Random enqueue order permits applications processing images out of
-   order (such as video codecs) to return buffers earlier, reducing the
-   probability of data loss. Random fill order allows drivers to reuse
-   buffers on a LIFO-basis, taking advantage of caches holding
-   scatter-gather lists and the like.
-
-.. [#f3]
-   At the driver level :ref:`select() <func-select>` and :ref:`poll() <func-poll>` are
-   the same, and :ref:`select() <func-select>` is too important to be optional.
-   The rest should be evident.
diff --git a/Documentation/media/uapi/v4l/nv12mt.svg b/Documentation/media/uapi/v4l/nv12mt.svg
deleted file mode 100644
index 067d8fb34ba2..000000000000
--- a/Documentation/media/uapi/v4l/nv12mt.svg
+++ /dev/null
@@ -1,477 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    This file is dual-licensed: you can use it either under the terms
-    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-    dual licensing only applies to this file, and not this project as a
-    whole.
-
-    a) This file is free software; you can redistribute it and/or
-       modify it under the terms of the GNU General Public License as
-       published by the Free Software Foundation version 2 of
-       the License.
-
-       This file is distributed in the hope that it will be useful,
-       but WITHOUT ANY WARRANTY; without even the implied warranty of
-       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-       GNU General Public License for more details.
-
-    Or, alternatively,
-
-    b) Permission is granted to copy, distribute and/or modify this
-       document under the terms of the GNU Free Documentation License,
-       Version 1.1 or any later version published by the Free Software
-       Foundation, with no Invariant Sections, no Front-Cover Texts
-       and no Back-Cover Texts. A copy of the license is included at
-       Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   version="1.2"
-   width="96.282211mm"
-   height="28.282219mm"
-   viewBox="0 0 9628.2211 2828.2219"
-   preserveAspectRatio="xMidYMid"
-   xml:space="preserve"
-   id="svg2"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="nv12mt.svg"
-   style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
-     id="metadata383"><rdf:RDF><cc:Work
-	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview381"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:zoom="4.0919524"
-     inkscape:cx="170.57872"
-     inkscape:cy="50.106293"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg2" /><defs
-     class="ClipPathGroup"
-     id="defs4"><clipPath
-       id="presentation_clip_path"
-       clipPathUnits="userSpaceOnUse"><rect
-	 x="0"
-	 y="0"
-	 width="28000"
-	 height="21000"
-	 id="rect7" /></clipPath></defs><defs
-     id="defs9" /><defs
-     id="defs80" /><defs
-     id="defs103" /><defs
-     class="TextShapeIndex"
-     id="defs114" /><defs
-     class="EmbeddedBulletChars"
-     id="defs118" /><defs
-     class="TextEmbeddedBitmaps"
-     id="defs147" /><g
-     class="SlideGroup"
-     id="g177"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="g179"><g
-	 id="id1"
-	 class="Slide"
-	 clip-path="url(#presentation_clip_path)"><g
-	   class="Page"
-	   id="g182"><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g184"><g
-	       id="id6"><rect
-		 class="BoundingBox"
-		 x="3299"
-		 y="3199"
-		 width="2403"
-		 height="1403"
-		 id="rect187"
-		 style="fill:none;stroke:none" /><path
-		 d="m 4500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path189"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /><text
-		 class="TextShape"
-		 id="text191"><tspan
-		   class="TextParagraph"
-		   font-size="635px"
-		   font-weight="400"
-		   id="tspan193"
-		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-		     class="TextPosition"
-		     x="4325"
-		     y="4121"
-		     id="tspan195"><tspan
-		       id="tspan197"
-		       style="fill:#000000;stroke:none">0</tspan></tspan></tspan></text>
-</g></g><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g199"><g
-	       id="id7"><rect
-		 class="BoundingBox"
-		 x="5699"
-		 y="3199"
-		 width="2403"
-		 height="1403"
-		 id="rect202"
-		 style="fill:none;stroke:none" /><path
-		 d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path204"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /></g></g><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g206"><g
-	       id="id8"><rect
-		 class="BoundingBox"
-		 x="8099"
-		 y="3199"
-		 width="2403"
-		 height="1403"
-		 id="rect209"
-		 style="fill:none;stroke:none" /><path
-		 d="m 9300,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path211"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /><text
-		 class="TextShape"
-		 id="text213"><tspan
-		   class="TextParagraph"
-		   font-size="635px"
-		   font-weight="400"
-		   id="tspan215"
-		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-		     class="TextPosition"
-		     x="9125"
-		     y="4121"
-		     id="tspan217"><tspan
-		       id="tspan219"
-		       style="fill:#000000;stroke:none">6</tspan></tspan></tspan></text>
-</g></g><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g221"><g
-	       id="id9"><rect
-		 class="BoundingBox"
-		 x="5699"
-		 y="3199"
-		 width="2403"
-		 height="1403"
-		 id="rect224"
-		 style="fill:none;stroke:none" /><path
-		 d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path226"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /><text
-		 class="TextShape"
-		 id="text228"><tspan
-		   class="TextParagraph"
-		   font-size="635px"
-		   font-weight="400"
-		   id="tspan230"
-		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-		     class="TextPosition"
-		     x="6725"
-		     y="4121"
-		     id="tspan232"><tspan
-		       id="tspan234"
-		       style="fill:#000000;stroke:none">1</tspan></tspan></tspan></text>
-</g></g><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g236"><g
-	       id="id10"><rect
-		 class="BoundingBox"
-		 x="10499"
-		 y="3199"
-		 width="2403"
-		 height="1403"
-		 id="rect239"
-		 style="fill:none;stroke:none" /><path
-		 d="m 11700,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path241"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /><text
-		 class="TextShape"
-		 id="text243"><tspan
-		   class="TextParagraph"
-		   font-size="635px"
-		   font-weight="400"
-		   id="tspan245"
-		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-		     class="TextPosition"
-		     x="11525"
-		     y="4121"
-		     id="tspan247"><tspan
-		       id="tspan249"
-		       style="fill:#000000;stroke:none">7</tspan></tspan></tspan></text>
-</g></g><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g251"><g
-	       id="id11"><rect
-		 class="BoundingBox"
-		 x="3299"
-		 y="4599"
-		 width="2403"
-		 height="1403"
-		 id="rect254"
-		 style="fill:none;stroke:none" /><path
-		 d="m 4500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path256"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /><text
-		 class="TextShape"
-		 id="text258"><tspan
-		   class="TextParagraph"
-		   font-size="635px"
-		   font-weight="400"
-		   id="tspan260"
-		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-		     class="TextPosition"
-		     x="4325"
-		     y="5521"
-		     id="tspan262"><tspan
-		       id="tspan264"
-		       style="fill:#000000;stroke:none">2</tspan></tspan></tspan></text>
-</g></g><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g266"><g
-	       id="id12"><rect
-		 class="BoundingBox"
-		 x="5699"
-		 y="4599"
-		 width="2403"
-		 height="1403"
-		 id="rect269"
-		 style="fill:none;stroke:none" /><path
-		 d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path271"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /></g></g><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g273"><g
-	       id="id13"><rect
-		 class="BoundingBox"
-		 x="8099"
-		 y="4599"
-		 width="2403"
-		 height="1403"
-		 id="rect276"
-		 style="fill:none;stroke:none" /><path
-		 d="m 9300,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path278"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /><text
-		 class="TextShape"
-		 id="text280"><tspan
-		   class="TextParagraph"
-		   font-size="635px"
-		   font-weight="400"
-		   id="tspan282"
-		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-		     class="TextPosition"
-		     x="9125"
-		     y="5521"
-		     id="tspan284"><tspan
-		       id="tspan286"
-		       style="fill:#000000;stroke:none">4</tspan></tspan></tspan></text>
-</g></g><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g288"><g
-	       id="id14"><rect
-		 class="BoundingBox"
-		 x="5699"
-		 y="4599"
-		 width="2403"
-		 height="1403"
-		 id="rect291"
-		 style="fill:none;stroke:none" /><path
-		 d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path293"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /><text
-		 class="TextShape"
-		 id="text295"><tspan
-		   class="TextParagraph"
-		   font-size="635px"
-		   font-weight="400"
-		   id="tspan297"
-		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-		     class="TextPosition"
-		     x="6725"
-		     y="5521"
-		     id="tspan299"><tspan
-		       id="tspan301"
-		       style="fill:#000000;stroke:none">3</tspan></tspan></tspan></text>
-</g></g><g
-	     class="com.sun.star.drawing.CustomShape"
-	     id="g303"><g
-	       id="id15"><rect
-		 class="BoundingBox"
-		 x="10499"
-		 y="4599"
-		 width="2403"
-		 height="1403"
-		 id="rect306"
-		 style="fill:none;stroke:none" /><path
-		 d="m 11700,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-		 id="path308"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#3465a4" /><text
-		 class="TextShape"
-		 id="text310"><tspan
-		   class="TextParagraph"
-		   font-size="635px"
-		   font-weight="400"
-		   id="tspan312"
-		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-		     class="TextPosition"
-		     x="11525"
-		     y="5521"
-		     id="tspan314"><tspan
-		       id="tspan316"
-		       style="fill:#000000;stroke:none">5</tspan></tspan></tspan></text>
-</g></g><g
-	     class="com.sun.star.drawing.LineShape"
-	     id="g318"><g
-	       id="id16"><rect
-		 class="BoundingBox"
-		 x="5199"
-		 y="3850"
-		 width="1402"
-		 height="301"
-		 id="rect321"
-		 style="fill:none;stroke:none" /><path
-		 d="m 5200,4000 970,0"
-		 id="path323"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#ff3333" /><path
-		 d="m 6600,4000 -450,-150 0,300 450,-150 z"
-		 id="path325"
-		 inkscape:connector-curvature="0"
-		 style="fill:#ff3333;stroke:none" /></g></g><g
-	     class="com.sun.star.drawing.LineShape"
-	     id="g327"><g
-	       id="id17"><rect
-		 class="BoundingBox"
-		 x="5000"
-		 y="4299"
-		 width="1202"
-		 height="802"
-		 id="rect330"
-		 style="fill:none;stroke:none" /><path
-		 d="m 6200,4300 -842,561"
-		 id="path332"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#ff3333" /><path
-		 d="m 5000,5100 458,-125 -167,-249 -291,374 z"
-		 id="path334"
-		 inkscape:connector-curvature="0"
-		 style="fill:#ff3333;stroke:none" /></g></g><g
-	     class="com.sun.star.drawing.LineShape"
-	     id="g336"><g
-	       id="id18"><rect
-		 class="BoundingBox"
-		 x="5399"
-		 y="5250"
-		 width="1202"
-		 height="301"
-		 id="rect339"
-		 style="fill:none;stroke:none" /><path
-		 d="m 5400,5400 770,0"
-		 id="path341"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#ff3333" /><path
-		 d="m 6600,5400 -450,-150 0,300 450,-150 z"
-		 id="path343"
-		 inkscape:connector-curvature="0"
-		 style="fill:#ff3333;stroke:none" /></g></g><g
-	     class="com.sun.star.drawing.LineShape"
-	     id="g345"><g
-	       id="id19"><rect
-		 class="BoundingBox"
-		 x="7599"
-		 y="5250"
-		 width="1202"
-		 height="301"
-		 id="rect348"
-		 style="fill:none;stroke:none" /><path
-		 d="m 7600,5400 770,0"
-		 id="path350"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#ff3333" /><path
-		 d="m 8800,5400 -450,-150 0,300 450,-150 z"
-		 id="path352"
-		 inkscape:connector-curvature="0"
-		 style="fill:#ff3333;stroke:none" /></g></g><g
-	     class="com.sun.star.drawing.LineShape"
-	     id="g354"><g
-	       id="id20"><rect
-		 class="BoundingBox"
-		 x="9799"
-		 y="5250"
-		 width="1402"
-		 height="301"
-		 id="rect357"
-		 style="fill:none;stroke:none" /><path
-		 d="m 9800,5400 970,0"
-		 id="path359"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#ff3333" /><path
-		 d="m 11200,5400 -450,-150 0,300 450,-150 z"
-		 id="path361"
-		 inkscape:connector-curvature="0"
-		 style="fill:#ff3333;stroke:none" /></g></g><g
-	     class="com.sun.star.drawing.LineShape"
-	     id="g363"><g
-	       id="id21"><rect
-		 class="BoundingBox"
-		 x="9900"
-		 y="4200"
-		 width="1202"
-		 height="802"
-		 id="rect366"
-		 style="fill:none;stroke:none" /><path
-		 d="m 11100,5000 -842,-561"
-		 id="path368"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#ff3333" /><path
-		 d="m 9900,4200 291,374 167,-249 -458,-125 z"
-		 id="path370"
-		 inkscape:connector-curvature="0"
-		 style="fill:#ff3333;stroke:none" /></g></g><g
-	     class="com.sun.star.drawing.LineShape"
-	     id="g372"><g
-	       id="id22"><rect
-		 class="BoundingBox"
-		 x="9999"
-		 y="3850"
-		 width="1402"
-		 height="301"
-		 id="rect375"
-		 style="fill:none;stroke:none" /><path
-		 d="m 10000,4000 970,0"
-		 id="path377"
-		 inkscape:connector-curvature="0"
-		 style="fill:none;stroke:#ff3333" /><path
-		 d="m 11400,4000 -450,-150 0,300 450,-150 z"
-		 id="path379"
-		 inkscape:connector-curvature="0"
-		 style="fill:#ff3333;stroke:none" /></g></g></g></g></g></g></svg>
diff --git a/Documentation/media/uapi/v4l/nv12mt_example.svg b/Documentation/media/uapi/v4l/nv12mt_example.svg
deleted file mode 100644
index 70c3200fdb32..000000000000
--- a/Documentation/media/uapi/v4l/nv12mt_example.svg
+++ /dev/null
@@ -1,1616 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    This file is dual-licensed: you can use it either under the terms
-    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-    dual licensing only applies to this file, and not this project as a
-    whole.
-
-    a) This file is free software; you can redistribute it and/or
-       modify it under the terms of the GNU General Public License as
-       published by the Free Software Foundation version 2 of
-       the License.
-
-       This file is distributed in the hope that it will be useful,
-       but WITHOUT ANY WARRANTY; without even the implied warranty of
-       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-       GNU General Public License for more details.
-
-    Or, alternatively,
-
-    b) Permission is granted to copy, distribute and/or modify this
-       document under the terms of the GNU Free Documentation License,
-       Version 1.1 or any later version published by the Free Software
-       Foundation, with no Invariant Sections, no Front-Cover Texts
-       and no Back-Cover Texts. A copy of the license is included at
-       Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   version="1.2"
-   width="144.28223mm"
-   height="70.282227mm"
-   viewBox="0 0 14428.222 7028.2226"
-   preserveAspectRatio="xMidYMid"
-   xml:space="preserve"
-   id="svg2"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="nv12mt_example.svg"
-   style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
-     id="metadata953"><rdf:RDF><cc:Work
-	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview951"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:zoom="2.7306359"
-     inkscape:cx="255.61812"
-     inkscape:cy="124.51576"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg2" /><defs
-     class="ClipPathGroup"
-     id="defs4" /><defs
-     id="defs9" /><defs
-     id="defs84" /><defs
-     id="defs107" /><defs
-     class="TextShapeIndex"
-     id="defs118" /><defs
-     class="EmbeddedBulletChars"
-     id="defs122" /><defs
-     class="TextEmbeddedBitmaps"
-     id="defs151" /><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g188"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id6"><rect
-	 class="BoundingBox"
-	 x="3299"
-	 y="3199"
-	 width="2403"
-	 height="1403"
-	 id="rect191"
-	 style="fill:none;stroke:none" /><path
-	 d="m 4500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path193"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text195"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan197"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="4325"
-	     y="4121"
-	     id="tspan199"><tspan
-	       id="tspan201"
-	       style="fill:#000000;stroke:none">0</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g203"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id7"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="3199"
-	 width="2403"
-	 height="1403"
-	 id="rect206"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path208"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g210"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id8"><rect
-	 class="BoundingBox"
-	 x="8099"
-	 y="3199"
-	 width="2403"
-	 height="1403"
-	 id="rect213"
-	 style="fill:none;stroke:none" /><path
-	 d="m 9300,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path215"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text217"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan219"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="9125"
-	     y="4121"
-	     id="tspan221"><tspan
-	       id="tspan223"
-	       style="fill:#000000;stroke:none">6</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g225"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id9"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="3199"
-	 width="2403"
-	 height="1403"
-	 id="rect228"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path230"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text232"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan234"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="6725"
-	     y="4121"
-	     id="tspan236"><tspan
-	       id="tspan238"
-	       style="fill:#000000;stroke:none">1</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g240"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id10"><rect
-	 class="BoundingBox"
-	 x="10499"
-	 y="3199"
-	 width="2403"
-	 height="1403"
-	 id="rect243"
-	 style="fill:none;stroke:none" /><path
-	 d="m 11700,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path245"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text247"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan249"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="11525"
-	     y="4121"
-	     id="tspan251"><tspan
-	       id="tspan253"
-	       style="fill:#000000;stroke:none">7</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g255"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id11"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="3199"
-	 width="2403"
-	 height="1403"
-	 id="rect258"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path260"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g262"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id12"><rect
-	 class="BoundingBox"
-	 x="15299"
-	 y="3199"
-	 width="2403"
-	 height="1403"
-	 id="rect265"
-	 style="fill:none;stroke:none" /><path
-	 d="m 16500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path267"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text269"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan271"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="16325"
-	     y="4121"
-	     id="tspan273"><tspan
-	       id="tspan275"
-	       style="fill:#000000;stroke:none">9</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g277"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id13"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="3199"
-	 width="2403"
-	 height="1403"
-	 id="rect280"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path282"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text284"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan286"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="13925"
-	     y="4121"
-	     id="tspan288"><tspan
-	       id="tspan290"
-	       style="fill:#000000;stroke:none">8</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g292"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id14"><rect
-	 class="BoundingBox"
-	 x="3299"
-	 y="4599"
-	 width="2403"
-	 height="1403"
-	 id="rect295"
-	 style="fill:none;stroke:none" /><path
-	 d="m 4500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path297"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text299"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan301"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="4325"
-	     y="5521"
-	     id="tspan303"><tspan
-	       id="tspan305"
-	       style="fill:#000000;stroke:none">2</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g307"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id15"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="4599"
-	 width="2403"
-	 height="1403"
-	 id="rect310"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path312"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g314"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id16"><rect
-	 class="BoundingBox"
-	 x="8099"
-	 y="4599"
-	 width="2403"
-	 height="1403"
-	 id="rect317"
-	 style="fill:none;stroke:none" /><path
-	 d="m 9300,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path319"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text321"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan323"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="9125"
-	     y="5521"
-	     id="tspan325"><tspan
-	       id="tspan327"
-	       style="fill:#000000;stroke:none">4</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g329"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id17"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="4599"
-	 width="2403"
-	 height="1403"
-	 id="rect332"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path334"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text336"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan338"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="6725"
-	     y="5521"
-	     id="tspan340"><tspan
-	       id="tspan342"
-	       style="fill:#000000;stroke:none">3</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g344"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id18"><rect
-	 class="BoundingBox"
-	 x="10499"
-	 y="4599"
-	 width="2403"
-	 height="1403"
-	 id="rect347"
-	 style="fill:none;stroke:none" /><path
-	 d="m 11700,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path349"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text351"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan353"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="11525"
-	     y="5521"
-	     id="tspan355"><tspan
-	       id="tspan357"
-	       style="fill:#000000;stroke:none">5</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g359"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id19"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="4599"
-	 width="2403"
-	 height="1403"
-	 id="rect362"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path364"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g366"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id20"><rect
-	 class="BoundingBox"
-	 x="15299"
-	 y="4599"
-	 width="2403"
-	 height="1403"
-	 id="rect369"
-	 style="fill:none;stroke:none" /><path
-	 d="m 16500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path371"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text373"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan375"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="16149"
-	     y="5521"
-	     id="tspan377"><tspan
-	       id="tspan379"
-	       style="fill:#000000;stroke:none">11</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g381"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id21"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="4599"
-	 width="2403"
-	 height="1403"
-	 id="rect384"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path386"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text388"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan390"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="13749"
-	     y="5521"
-	     id="tspan392"><tspan
-	       id="tspan394"
-	       style="fill:#000000;stroke:none">10</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g396"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id22"><rect
-	 class="BoundingBox"
-	 x="3299"
-	 y="5999"
-	 width="2403"
-	 height="1403"
-	 id="rect399"
-	 style="fill:none;stroke:none" /><path
-	 d="m 4500,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path401"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text403"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan405"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="4149"
-	     y="6921"
-	     id="tspan407"><tspan
-	       id="tspan409"
-	       style="fill:#000000;stroke:none">12</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g411"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id23"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="5999"
-	 width="2403"
-	 height="1403"
-	 id="rect414"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path416"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g418"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id24"><rect
-	 class="BoundingBox"
-	 x="8099"
-	 y="5999"
-	 width="2403"
-	 height="1403"
-	 id="rect421"
-	 style="fill:none;stroke:none" /><path
-	 d="m 9300,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path423"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text425"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan427"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="8949"
-	     y="6921"
-	     id="tspan429"><tspan
-	       id="tspan431"
-	       style="fill:#000000;stroke:none">18</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g433"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id25"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="5999"
-	 width="2403"
-	 height="1403"
-	 id="rect436"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path438"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text440"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan442"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="6549"
-	     y="6921"
-	     id="tspan444"><tspan
-	       id="tspan446"
-	       style="fill:#000000;stroke:none">13</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g448"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id26"><rect
-	 class="BoundingBox"
-	 x="10499"
-	 y="5999"
-	 width="2403"
-	 height="1403"
-	 id="rect451"
-	 style="fill:none;stroke:none" /><path
-	 d="m 11700,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path453"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text455"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan457"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="11349"
-	     y="6921"
-	     id="tspan459"><tspan
-	       id="tspan461"
-	       style="fill:#000000;stroke:none">19</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g463"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id27"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="5999"
-	 width="2403"
-	 height="1403"
-	 id="rect466"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path468"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g470"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id28"><rect
-	 class="BoundingBox"
-	 x="15299"
-	 y="5999"
-	 width="2403"
-	 height="1403"
-	 id="rect473"
-	 style="fill:none;stroke:none" /><path
-	 d="m 16500,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path475"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text477"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan479"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="16149"
-	     y="6921"
-	     id="tspan481"><tspan
-	       id="tspan483"
-	       style="fill:#000000;stroke:none">21</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g485"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id29"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="5999"
-	 width="2403"
-	 height="1403"
-	 id="rect488"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path490"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text492"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan494"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="13749"
-	     y="6921"
-	     id="tspan496"><tspan
-	       id="tspan498"
-	       style="fill:#000000;stroke:none">20</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g500"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id30"><rect
-	 class="BoundingBox"
-	 x="3299"
-	 y="7399"
-	 width="2403"
-	 height="1403"
-	 id="rect503"
-	 style="fill:none;stroke:none" /><path
-	 d="m 4500,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path505"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text507"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan509"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="4149"
-	     y="8321"
-	     id="tspan511"><tspan
-	       id="tspan513"
-	       style="fill:#000000;stroke:none">14</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g515"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id31"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="7399"
-	 width="2403"
-	 height="1403"
-	 id="rect518"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path520"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g522"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id32"><rect
-	 class="BoundingBox"
-	 x="8099"
-	 y="7399"
-	 width="2403"
-	 height="1403"
-	 id="rect525"
-	 style="fill:none;stroke:none" /><path
-	 d="m 9300,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path527"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text529"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan531"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="8949"
-	     y="8321"
-	     id="tspan533"><tspan
-	       id="tspan535"
-	       style="fill:#000000;stroke:none">16</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g537"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id33"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="7399"
-	 width="2403"
-	 height="1403"
-	 id="rect540"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path542"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text544"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan546"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="6549"
-	     y="8321"
-	     id="tspan548"><tspan
-	       id="tspan550"
-	       style="fill:#000000;stroke:none">15</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g552"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id34"><rect
-	 class="BoundingBox"
-	 x="10499"
-	 y="7399"
-	 width="2403"
-	 height="1403"
-	 id="rect555"
-	 style="fill:none;stroke:none" /><path
-	 d="m 11700,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path557"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text559"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan561"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="11349"
-	     y="8321"
-	     id="tspan563"><tspan
-	       id="tspan565"
-	       style="fill:#000000;stroke:none">17</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g567"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id35"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="7399"
-	 width="2403"
-	 height="1403"
-	 id="rect570"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path572"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g574"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id36"><rect
-	 class="BoundingBox"
-	 x="15299"
-	 y="7399"
-	 width="2403"
-	 height="1403"
-	 id="rect577"
-	 style="fill:none;stroke:none" /><path
-	 d="m 16500,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path579"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text581"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan583"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="16149"
-	     y="8321"
-	     id="tspan585"><tspan
-	       id="tspan587"
-	       style="fill:#000000;stroke:none">23</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g589"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id37"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="7399"
-	 width="2403"
-	 height="1403"
-	 id="rect592"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path594"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text596"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan598"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="13749"
-	     y="8321"
-	     id="tspan600"><tspan
-	       id="tspan602"
-	       style="fill:#000000;stroke:none">22</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g604"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id38"><rect
-	 class="BoundingBox"
-	 x="3299"
-	 y="8799"
-	 width="2403"
-	 height="1403"
-	 id="rect607"
-	 style="fill:none;stroke:none" /><path
-	 d="m 4500,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path609"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text611"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan613"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="4149"
-	     y="9721"
-	     id="tspan615"><tspan
-	       id="tspan617"
-	       style="fill:#000000;stroke:none">24</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g619"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id39"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="8799"
-	 width="2403"
-	 height="1403"
-	 id="rect622"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path624"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g626"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id40"><rect
-	 class="BoundingBox"
-	 x="8099"
-	 y="8799"
-	 width="2403"
-	 height="1403"
-	 id="rect629"
-	 style="fill:none;stroke:none" /><path
-	 d="m 9300,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path631"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text633"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan635"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="8949"
-	     y="9721"
-	     id="tspan637"><tspan
-	       id="tspan639"
-	       style="fill:#000000;stroke:none">26</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g641"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id41"><rect
-	 class="BoundingBox"
-	 x="5699"
-	 y="8799"
-	 width="2403"
-	 height="1403"
-	 id="rect644"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6900,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path646"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text648"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan650"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="6549"
-	     y="9721"
-	     id="tspan652"><tspan
-	       id="tspan654"
-	       style="fill:#000000;stroke:none">25</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g656"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id42"><rect
-	 class="BoundingBox"
-	 x="10499"
-	 y="8799"
-	 width="2403"
-	 height="1403"
-	 id="rect659"
-	 style="fill:none;stroke:none" /><path
-	 d="m 11700,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path661"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text663"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan665"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="11349"
-	     y="9721"
-	     id="tspan667"><tspan
-	       id="tspan669"
-	       style="fill:#000000;stroke:none">27</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g671"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id43"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="8799"
-	 width="2403"
-	 height="1403"
-	 id="rect674"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path676"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /></g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g678"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id44"><rect
-	 class="BoundingBox"
-	 x="15299"
-	 y="8799"
-	 width="2403"
-	 height="1403"
-	 id="rect681"
-	 style="fill:none;stroke:none" /><path
-	 d="m 16500,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path683"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text685"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan687"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="16149"
-	     y="9721"
-	     id="tspan689"><tspan
-	       id="tspan691"
-	       style="fill:#000000;stroke:none">29</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g693"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id45"><rect
-	 class="BoundingBox"
-	 x="12899"
-	 y="8799"
-	 width="2403"
-	 height="1403"
-	 id="rect696"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14100,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
-	 id="path698"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#3465a4" /><text
-	 class="TextShape"
-	 id="text700"><tspan
-	   class="TextParagraph"
-	   font-size="635px"
-	   font-weight="400"
-	   id="tspan702"
-	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
-	     class="TextPosition"
-	     x="13749"
-	     y="9721"
-	     id="tspan704"><tspan
-	       id="tspan706"
-	       style="fill:#000000;stroke:none">28</tspan></tspan></tspan></text>
-</g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g708"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id46"><rect
-	 class="BoundingBox"
-	 x="5199"
-	 y="3850"
-	 width="1402"
-	 height="301"
-	 id="rect711"
-	 style="fill:none;stroke:none" /><path
-	 d="m 5200,4000 970,0"
-	 id="path713"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 6600,4000 -450,-150 0,300 450,-150 z"
-	 id="path715"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g717"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id47"><rect
-	 class="BoundingBox"
-	 x="5000"
-	 y="4299"
-	 width="1202"
-	 height="802"
-	 id="rect720"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6200,4300 -842,561"
-	 id="path722"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 5000,5100 458,-125 -167,-249 -291,374 z"
-	 id="path724"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g726"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id48"><rect
-	 class="BoundingBox"
-	 x="5399"
-	 y="5250"
-	 width="1202"
-	 height="301"
-	 id="rect729"
-	 style="fill:none;stroke:none" /><path
-	 d="m 5400,5400 770,0"
-	 id="path731"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 6600,5400 -450,-150 0,300 450,-150 z"
-	 id="path733"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g735"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id49"><rect
-	 class="BoundingBox"
-	 x="7599"
-	 y="5250"
-	 width="1202"
-	 height="301"
-	 id="rect738"
-	 style="fill:none;stroke:none" /><path
-	 d="m 7600,5400 770,0"
-	 id="path740"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 8800,5400 -450,-150 0,300 450,-150 z"
-	 id="path742"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g744"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id50"><rect
-	 class="BoundingBox"
-	 x="9799"
-	 y="5250"
-	 width="1402"
-	 height="301"
-	 id="rect747"
-	 style="fill:none;stroke:none" /><path
-	 d="m 9800,5400 970,0"
-	 id="path749"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 11200,5400 -450,-150 0,300 450,-150 z"
-	 id="path751"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g753"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id51"><rect
-	 class="BoundingBox"
-	 x="9900"
-	 y="4200"
-	 width="1202"
-	 height="802"
-	 id="rect756"
-	 style="fill:none;stroke:none" /><path
-	 d="m 11100,5000 -842,-561"
-	 id="path758"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 9900,4200 291,374 167,-249 -458,-125 z"
-	 id="path760"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g762"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id52"><rect
-	 class="BoundingBox"
-	 x="9999"
-	 y="3850"
-	 width="1402"
-	 height="301"
-	 id="rect765"
-	 style="fill:none;stroke:none" /><path
-	 d="m 10000,4000 970,0"
-	 id="path767"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 11400,4000 -450,-150 0,300 450,-150 z"
-	 id="path769"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g771"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id53"><rect
-	 class="BoundingBox"
-	 x="12399"
-	 y="3850"
-	 width="1202"
-	 height="301"
-	 id="rect774"
-	 style="fill:none;stroke:none" /><path
-	 d="m 12400,4000 770,0"
-	 id="path776"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 13600,4000 -450,-150 0,300 450,-150 z"
-	 id="path778"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g780"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id54"><rect
-	 class="BoundingBox"
-	 x="14799"
-	 y="3850"
-	 width="1202"
-	 height="301"
-	 id="rect783"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14800,4000 770,0"
-	 id="path785"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 16000,4000 -450,-150 0,300 450,-150 z"
-	 id="path787"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g789"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id55"><rect
-	 class="BoundingBox"
-	 x="14400"
-	 y="4399"
-	 width="1402"
-	 height="602"
-	 id="rect792"
-	 style="fill:none;stroke:none" /><path
-	 d="m 15800,4400 -1005,431"
-	 id="path794"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 14400,5000 473,-39 -118,-276 -355,315 z"
-	 id="path796"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g798"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id56"><rect
-	 class="BoundingBox"
-	 x="14599"
-	 y="5250"
-	 width="1402"
-	 height="301"
-	 id="rect801"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14600,5400 970,0"
-	 id="path803"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 16000,5400 -450,-150 0,300 450,-150 z"
-	 id="path805"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g807"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id57"><rect
-	 class="BoundingBox"
-	 x="5199"
-	 y="6550"
-	 width="1402"
-	 height="301"
-	 id="rect810"
-	 style="fill:none;stroke:none" /><path
-	 d="m 5200,6700 970,0"
-	 id="path812"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 6600,6700 -450,-150 0,300 450,-150 z"
-	 id="path814"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g816"
-     transform="translate(-3285.889,-3129.4446)"><g
-       id="id58"><rect
-	 class="BoundingBox"
-	 x="5000"
-	 y="6999"
-	 width="1202"
-	 height="802"
-	 id="rect819"
-	 style="fill:none;stroke:none" /><path
-	 d="m 6200,7000 -842,561"
-	 id="path821"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 5000,7800 458,-125 -167,-249 -291,374 z"
-	 id="path823"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g825"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id59"><rect
-	 class="BoundingBox"
-	 x="5399"
-	 y="7950"
-	 width="1202"
-	 height="301"
-	 id="rect828"
-	 style="fill:none;stroke:none" /><path
-	 d="m 5400,8100 770,0"
-	 id="path830"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 6600,8100 -450,-150 0,300 450,-150 z"
-	 id="path832"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g834"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id60"><rect
-	 class="BoundingBox"
-	 x="7599"
-	 y="7950"
-	 width="1202"
-	 height="301"
-	 id="rect837"
-	 style="fill:none;stroke:none" /><path
-	 d="m 7600,8100 770,0"
-	 id="path839"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 8800,8100 -450,-150 0,300 450,-150 z"
-	 id="path841"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g843"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id61"><rect
-	 class="BoundingBox"
-	 x="9799"
-	 y="7950"
-	 width="1402"
-	 height="301"
-	 id="rect846"
-	 style="fill:none;stroke:none" /><path
-	 d="m 9800,8100 970,0"
-	 id="path848"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 11200,8100 -450,-150 0,300 450,-150 z"
-	 id="path850"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g852"
-     transform="translate(-3285.889,-3129.4446)"><g
-       id="id62"><rect
-	 class="BoundingBox"
-	 x="9900"
-	 y="6900"
-	 width="1202"
-	 height="802"
-	 id="rect855"
-	 style="fill:none;stroke:none" /><path
-	 d="m 11100,7700 -842,-561"
-	 id="path857"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 9900,6900 291,374 167,-249 -458,-125 z"
-	 id="path859"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g861"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id63"><rect
-	 class="BoundingBox"
-	 x="9999"
-	 y="6550"
-	 width="1402"
-	 height="301"
-	 id="rect864"
-	 style="fill:none;stroke:none" /><path
-	 d="m 10000,6700 970,0"
-	 id="path866"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 11400,6700 -450,-150 0,300 450,-150 z"
-	 id="path868"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g870"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id64"><rect
-	 class="BoundingBox"
-	 x="12399"
-	 y="6550"
-	 width="1202"
-	 height="301"
-	 id="rect873"
-	 style="fill:none;stroke:none" /><path
-	 d="m 12400,6700 770,0"
-	 id="path875"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 13600,6700 -450,-150 0,300 450,-150 z"
-	 id="path877"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g879"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id65"><rect
-	 class="BoundingBox"
-	 x="14799"
-	 y="6550"
-	 width="1202"
-	 height="301"
-	 id="rect882"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14800,6700 770,0"
-	 id="path884"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 16000,6700 -450,-150 0,300 450,-150 z"
-	 id="path886"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g888"
-     transform="translate(-3285.889,-3129.4446)"><g
-       id="id66"><rect
-	 class="BoundingBox"
-	 x="14400"
-	 y="7099"
-	 width="1402"
-	 height="602"
-	 id="rect891"
-	 style="fill:none;stroke:none" /><path
-	 d="m 15800,7100 -1005,431"
-	 id="path893"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 14400,7700 473,-39 -118,-276 -355,315 z"
-	 id="path895"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g897"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id67"><rect
-	 class="BoundingBox"
-	 x="14599"
-	 y="7950"
-	 width="1402"
-	 height="301"
-	 id="rect900"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14600,8100 970,0"
-	 id="path902"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 16000,8100 -450,-150 0,300 450,-150 z"
-	 id="path904"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g906"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id68"><rect
-	 class="BoundingBox"
-	 x="5399"
-	 y="9450"
-	 width="1202"
-	 height="301"
-	 id="rect909"
-	 style="fill:none;stroke:none" /><path
-	 d="m 5400,9600 770,0"
-	 id="path911"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 6600,9600 -450,-150 0,300 450,-150 z"
-	 id="path913"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g915"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id69"><rect
-	 class="BoundingBox"
-	 x="7599"
-	 y="9450"
-	 width="1202"
-	 height="301"
-	 id="rect918"
-	 style="fill:none;stroke:none" /><path
-	 d="m 7600,9600 770,0"
-	 id="path920"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 8800,9600 -450,-150 0,300 450,-150 z"
-	 id="path922"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g924"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id70"><rect
-	 class="BoundingBox"
-	 x="9999"
-	 y="9450"
-	 width="1202"
-	 height="301"
-	 id="rect927"
-	 style="fill:none;stroke:none" /><path
-	 d="m 10000,9600 770,0"
-	 id="path929"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 11200,9600 -450,-150 0,300 450,-150 z"
-	 id="path931"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g933"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id71"><rect
-	 class="BoundingBox"
-	 x="12399"
-	 y="9450"
-	 width="1202"
-	 height="301"
-	 id="rect936"
-	 style="fill:none;stroke:none" /><path
-	 d="m 12400,9600 770,0"
-	 id="path938"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 13600,9600 -450,-150 0,300 450,-150 z"
-	 id="path940"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g><g
-     class="com.sun.star.drawing.LineShape"
-     id="g942"
-     transform="translate(-3285.889,-3185.889)"><g
-       id="id72"><rect
-	 class="BoundingBox"
-	 x="14799"
-	 y="9450"
-	 width="1202"
-	 height="301"
-	 id="rect945"
-	 style="fill:none;stroke:none" /><path
-	 d="m 14800,9600 770,0"
-	 id="path947"
-	 inkscape:connector-curvature="0"
-	 style="fill:none;stroke:#ff3333" /><path
-	 d="m 16000,9600 -450,-150 0,300 450,-150 z"
-	 id="path949"
-	 inkscape:connector-curvature="0"
-	 style="fill:#ff3333;stroke:none" /></g></g></svg>
diff --git a/Documentation/media/uapi/v4l/open.rst b/Documentation/media/uapi/v4l/open.rst
deleted file mode 100644
index 42fad5001c5c..000000000000
--- a/Documentation/media/uapi/v4l/open.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _open:
-
-***************************
-Opening and Closing Devices
-***************************
-
-
-Device Naming
-=============
-
-V4L2 drivers are implemented as kernel modules, loaded manually by the
-system administrator or automatically when a device is first discovered.
-The driver modules plug into the "videodev" kernel module. It provides
-helper functions and a common application interface specified in this
-document.
-
-Each driver thus loaded registers one or more device nodes with major
-number 81 and a minor number between 0 and 255. Minor numbers are
-allocated dynamically unless the kernel is compiled with the kernel
-option CONFIG_VIDEO_FIXED_MINOR_RANGES. In that case minor numbers
-are allocated in ranges depending on the device node type (video, radio,
-etc.).
-
-Many drivers support "video_nr", "radio_nr" or "vbi_nr" module
-options to select specific video/radio/vbi node numbers. This allows the
-user to request that the device node is named e.g. /dev/video5 instead
-of leaving it to chance. When the driver supports multiple devices of
-the same type more than one device node number can be assigned,
-separated by commas:
-
-.. code-block:: none
-
-   # modprobe mydriver video_nr=0,1 radio_nr=0,1
-
-In ``/etc/modules.conf`` this may be written as:
-
-::
-
-    options mydriver video_nr=0,1 radio_nr=0,1
-
-When no device node number is given as module option the driver supplies
-a default.
-
-Normally udev will create the device nodes in /dev automatically for
-you. If udev is not installed, then you need to enable the
-CONFIG_VIDEO_FIXED_MINOR_RANGES kernel option in order to be able to
-correctly relate a minor number to a device node number. I.e., you need
-to be certain that minor number 5 maps to device node name video5. With
-this kernel option different device types have different minor number
-ranges. These ranges are listed in :ref:`devices`.
-
-The creation of character special files (with mknod) is a privileged
-operation and devices cannot be opened by major and minor number. That
-means applications cannot *reliably* scan for loaded or installed
-drivers. The user must enter a device name, or the application can try
-the conventional device names.
-
-
-.. _related:
-
-Related Devices
-===============
-
-Devices can support several functions. For example video capturing, VBI
-capturing and radio support.
-
-The V4L2 API creates different nodes for each of these functions.
-
-The V4L2 API was designed with the idea that one device node could
-support all functions. However, in practice this never worked: this
-'feature' was never used by applications and many drivers did not
-support it and if they did it was certainly never tested. In addition,
-switching a device node between different functions only works when
-using the streaming I/O API, not with the
-:ref:`read() <func-read>`/\ :ref:`write() <func-write>` API.
-
-Today each device node supports just one function.
-
-Besides video input or output the hardware may also support audio
-sampling or playback. If so, these functions are implemented as ALSA PCM
-devices with optional ALSA audio mixer devices.
-
-One problem with all these devices is that the V4L2 API makes no
-provisions to find these related devices. Some really complex devices
-use the Media Controller (see :ref:`media_controller`) which can be
-used for this purpose. But most drivers do not use it, and while some
-code exists that uses sysfs to discover related devices (see
-libmedia_dev in the
-`v4l-utils <http://git.linuxtv.org/cgit.cgi/v4l-utils.git/>`__ git
-repository), there is no library yet that can provide a single API
-towards both Media Controller-based devices and devices that do not use
-the Media Controller. If you want to work on this please write to the
-linux-media mailing list:
-`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__.
-
-
-Multiple Opens
-==============
-
-V4L2 devices can be opened more than once. [#f1]_ When this is supported
-by the driver, users can for example start a "panel" application to
-change controls like brightness or audio volume, while another
-application captures video and audio. In other words, panel applications
-are comparable to an ALSA audio mixer application. Just opening a V4L2
-device should not change the state of the device. [#f2]_
-
-Once an application has allocated the memory buffers needed for
-streaming data (by calling the :ref:`VIDIOC_REQBUFS`
-or :ref:`VIDIOC_CREATE_BUFS` ioctls, or
-implicitly by calling the :ref:`read() <func-read>` or
-:ref:`write() <func-write>` functions) that application (filehandle)
-becomes the owner of the device. It is no longer allowed to make changes
-that would affect the buffer sizes (e.g. by calling the
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl) and other applications are
-no longer allowed to allocate buffers or start or stop streaming. The
-EBUSY error code will be returned instead.
-
-Merely opening a V4L2 device does not grant exclusive access. [#f3]_
-Initiating data exchange however assigns the right to read or write the
-requested type of data, and to change related properties, to this file
-descriptor. Applications can request additional access privileges using
-the priority mechanism described in :ref:`app-pri`.
-
-
-Shared Data Streams
-===================
-
-V4L2 drivers should not support multiple applications reading or writing
-the same data stream on a device by copying buffers, time multiplexing
-or similar means. This is better handled by a proxy application in user
-space.
-
-
-Functions
-=========
-
-To open and close V4L2 devices applications use the
-:ref:`open() <func-open>` and :ref:`close() <func-close>` function,
-respectively. Devices are programmed using the
-:ref:`ioctl() <func-ioctl>` function as explained in the following
-sections.
-
-.. [#f1]
-   There are still some old and obscure drivers that have not been
-   updated to allow for multiple opens. This implies that for such
-   drivers :ref:`open() <func-open>` can return an ``EBUSY`` error code
-   when the device is already in use.
-
-.. [#f2]
-   Unfortunately, opening a radio device often switches the state of the
-   device to radio mode in many drivers. This behavior should be fixed
-   eventually as it violates the V4L2 specification.
-
-.. [#f3]
-   Drivers could recognize the ``O_EXCL`` open flag. Presently this is
-   not required, so applications cannot know if it really works.
diff --git a/Documentation/media/uapi/v4l/pipeline.dot b/Documentation/media/uapi/v4l/pipeline.dot
deleted file mode 100644
index 8c53ce719a14..000000000000
--- a/Documentation/media/uapi/v4l/pipeline.dot
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-digraph board {
-	rankdir=TB
-	colorscheme=x11
-	scaler [label="{<scaler_0> 0} | Host\nScaler | {<scaler_1> 1} ", shape=Mrecord, style=filled, fillcolor=lightblue]
-	frontend [label="{<frontend_0> 0} | Host\nFrontend | {<frontend_1> 1}", shape=Mrecord, style=filled, fillcolor=lightblue]
-	sensor [label="Sensor | {<sensor_0> 0}", shape=Mrecord, style=filled, fillcolor=aquamarine]
-	io [label="{<io_0> 0} | V4L I/O", shape=Mrecord, style=filled, fillcolor=aquamarine]
-
-	sensor:sensor_0 -> frontend:frontend_0 [color=blue, label="HQ: 2592x1968\nHS: 1296x984"]
-	frontend:frontend_1 -> scaler:scaler_0 [color=blue, label="HQ: 2592x1968\nHS: 1296x984"]
-	scaler:scaler_1 -> io:io_0 [color=blue, label="HQ: 1280x720\nHS: 1280x720"]
-}
diff --git a/Documentation/media/uapi/v4l/pixfmt-bayer.rst b/Documentation/media/uapi/v4l/pixfmt-bayer.rst
deleted file mode 100644
index 807ab34ba93b..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-bayer.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _pixfmt-bayer:
-
-*****************
-Raw Bayer Formats
-*****************
-
-Description
-===========
-
-The raw Bayer formats are used by image sensors before much if any processing is
-performed on the image. The formats contain green, red and blue components, with
-alternating lines of red and green, and blue and green pixels in different
-orders. See also `the Wikipedia article on Bayer filter
-<https://en.wikipedia.org/wiki/Bayer_filter>`__.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    pixfmt-srggb8
-    pixfmt-srggb10
-    pixfmt-srggb10p
-    pixfmt-srggb10alaw8
-    pixfmt-srggb10dpcm8
-    pixfmt-srggb10-ipu3
-    pixfmt-srggb12
-    pixfmt-srggb12p
-    pixfmt-srggb14
-    pixfmt-srggb14p
-    pixfmt-srggb16
diff --git a/Documentation/media/uapi/v4l/pixfmt-cnf4.rst b/Documentation/media/uapi/v4l/pixfmt-cnf4.rst
deleted file mode 100644
index 8f469290c304..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-cnf4.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-.. -*- coding: utf-8; mode: rst -*-
-
-.. _V4L2-PIX-FMT-CNF4:
-
-******************************
-V4L2_PIX_FMT_CNF4 ('CNF4')
-******************************
-
-Depth sensor confidence information as a 4 bits per pixel packed array
-
-Description
-===========
-
-Proprietary format used by Intel RealSense Depth cameras containing depth
-confidence information in range 0-15 with 0 indicating that the sensor was
-unable to resolve any signal and 15 indicating maximum level of confidence for
-the specific sensor (actual error margins might change from sensor to sensor).
-
-Every two consecutive pixels are packed into a single byte.
-Bits 0-3 of byte n refer to confidence value of depth pixel 2*n,
-bits 4-7 to confidence value of depth pixel 2*n+1.
-
-**Bit-packed representation.**
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 64 64
-
-    * - Y'\ :sub:`01[3:0]`\ (bits 7--4) Y'\ :sub:`00[3:0]`\ (bits 3--0)
-      - Y'\ :sub:`03[3:0]`\ (bits 7--4) Y'\ :sub:`02[3:0]`\ (bits 3--0)
diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
deleted file mode 100644
index 561bda112809..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst
+++ /dev/null
@@ -1,232 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-******************
-Compressed Formats
-******************
-
-
-.. _compressed-formats:
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. flat-table:: Compressed Image Formats
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - Identifier
-      - Code
-      - Details
-    * .. _V4L2-PIX-FMT-JPEG:
-
-      - ``V4L2_PIX_FMT_JPEG``
-      - 'JPEG'
-      - TBD. See also :ref:`VIDIOC_G_JPEGCOMP <VIDIOC_G_JPEGCOMP>`,
-	:ref:`VIDIOC_S_JPEGCOMP <VIDIOC_G_JPEGCOMP>`.
-    * .. _V4L2-PIX-FMT-MPEG:
-
-      - ``V4L2_PIX_FMT_MPEG``
-      - 'MPEG'
-      - MPEG multiplexed stream. The actual format is determined by
-	extended control ``V4L2_CID_MPEG_STREAM_TYPE``, see
-	:ref:`mpeg-control-id`.
-    * .. _V4L2-PIX-FMT-H264:
-
-      - ``V4L2_PIX_FMT_H264``
-      - 'H264'
-      - H264 Access Unit.
-	The decoder expects one Access Unit per buffer.
-	The encoder generates one Access Unit per buffer.
-	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
-	then the decoder has no requirements since it can parse all the
-	information from the raw bytestream.
-    * .. _V4L2-PIX-FMT-H264-NO-SC:
-
-      - ``V4L2_PIX_FMT_H264_NO_SC``
-      - 'AVC1'
-      - H264 video elementary stream without start codes.
-    * .. _V4L2-PIX-FMT-H264-MVC:
-
-      - ``V4L2_PIX_FMT_H264_MVC``
-      - 'M264'
-      - H264 MVC video elementary stream.
-    * .. _V4L2-PIX-FMT-H264-SLICE:
-
-      - ``V4L2_PIX_FMT_H264_SLICE``
-      - 'S264'
-      - H264 parsed slice data, including slice headers, either with or
-	without the start code, as extracted from the H264 bitstream.
-	This format is adapted for stateless video decoders that implement an
-	H264 pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
-	This pixelformat has two modifiers that must be set at least once
-	through the ``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE``
-        and ``V4L2_CID_MPEG_VIDEO_H264_START_CODE`` controls.
-	In addition, metadata associated with the frame to decode are
-	required to be passed through the ``V4L2_CID_MPEG_VIDEO_H264_SPS``,
-	``V4L2_CID_MPEG_VIDEO_H264_PPS``,
-	``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``,
-	``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` and
-	``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS`` controls.  See the
-	:ref:`associated Codec Control IDs <v4l2-mpeg-h264>`.  Exactly
-	one output and one capture buffer must be provided for use
-	with this pixel format. The output buffer must contain the
-	appropriate number of macroblocks to decode a full
-	corresponding frame to the matching capture buffer.
-
-	The syntax for this format is documented in :ref:`h264`, section
-	7.3.2.8 "Slice layer without partitioning RBSP syntax" and the following
-	sections.
-
-	.. note::
-
-	   This format is not yet part of the public kernel API and it
-	   is expected to change.
-
-    * .. _V4L2-PIX-FMT-H263:
-
-      - ``V4L2_PIX_FMT_H263``
-      - 'H263'
-      - H263 video elementary stream.
-    * .. _V4L2-PIX-FMT-MPEG1:
-
-      - ``V4L2_PIX_FMT_MPEG1``
-      - 'MPG1'
-      - MPEG1 Picture. Each buffer starts with a Picture header, followed
-	by other headers as needed and ending with the Picture data.
-	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
-	then the decoder has no requirements since it can parse all the
-	information from the raw bytestream.
-    * .. _V4L2-PIX-FMT-MPEG2:
-
-      - ``V4L2_PIX_FMT_MPEG2``
-      - 'MPG2'
-      - MPEG2 Picture. Each buffer starts with a Picture header, followed
-	by other headers as needed and ending with the Picture data.
-	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
-	then the decoder has no requirements since it can parse all the
-	information from the raw bytestream.
-    * .. _V4L2-PIX-FMT-MPEG2-SLICE:
-
-      - ``V4L2_PIX_FMT_MPEG2_SLICE``
-      - 'MG2S'
-      - MPEG-2 parsed slice data, as extracted from the MPEG-2 bitstream.
-	This format is adapted for stateless video decoders that implement a
-	MPEG-2 pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
-	Metadata associated with the frame to decode is required to be passed
-	through the ``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS`` control and
-	quantization matrices can optionally be specified through the
-	``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION`` control.
-	See the :ref:`associated Codec Control IDs <v4l2-mpeg-mpeg2>`.
-	Exactly one output and one capture buffer must be provided for use with
-	this pixel format. The output buffer must contain the appropriate number
-	of macroblocks to decode a full corresponding frame to the matching
-	capture buffer.
-    * .. _V4L2-PIX-FMT-MPEG4:
-
-      - ``V4L2_PIX_FMT_MPEG4``
-      - 'MPG4'
-      - MPEG4 video elementary stream.
-    * .. _V4L2-PIX-FMT-XVID:
-
-      - ``V4L2_PIX_FMT_XVID``
-      - 'XVID'
-      - Xvid video elementary stream.
-    * .. _V4L2-PIX-FMT-VC1-ANNEX-G:
-
-      - ``V4L2_PIX_FMT_VC1_ANNEX_G``
-      - 'VC1G'
-      - VC1, SMPTE 421M Annex G compliant stream.
-    * .. _V4L2-PIX-FMT-VC1-ANNEX-L:
-
-      - ``V4L2_PIX_FMT_VC1_ANNEX_L``
-      - 'VC1L'
-      - VC1, SMPTE 421M Annex L compliant stream.
-    * .. _V4L2-PIX-FMT-VP8:
-
-      - ``V4L2_PIX_FMT_VP8``
-      - 'VP80'
-      - VP8 compressed video frame. The encoder generates one
-	compressed frame per buffer, and the decoder requires one
-	compressed frame per buffer.
-    * .. _V4L2-PIX-FMT-VP8-FRAME:
-
-      - ``V4L2_PIX_FMT_VP8_FRAME``
-      - 'VP8F'
-      - VP8 parsed frame, as extracted from the container.
-	This format is adapted for stateless video decoders that implement a
-	VP8 pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
-	Metadata associated with the frame to decode is required to be passed
-	through the ``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER`` control.
-	See the :ref:`associated Codec Control IDs <v4l2-mpeg-vp8>`.
-	Exactly one output and one capture buffer must be provided for use with
-	this pixel format. The output buffer must contain the appropriate number
-	of macroblocks to decode a full corresponding frame to the matching
-	capture buffer.
-
-	.. note::
-
-	   This format is not yet part of the public kernel API and it
-	   is expected to change.
-
-    * .. _V4L2-PIX-FMT-VP9:
-
-      - ``V4L2_PIX_FMT_VP9``
-      - 'VP90'
-      - VP9 compressed video frame. The encoder generates one
-	compressed frame per buffer, and the decoder requires one
-	compressed frame per buffer.
-    * .. _V4L2-PIX-FMT-HEVC:
-
-      - ``V4L2_PIX_FMT_HEVC``
-      - 'HEVC'
-      - HEVC/H.265 Access Unit.
-	The decoder expects one Access Unit per buffer.
-	The encoder generates one Access Unit per buffer.
-	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
-	then the decoder has no	requirements since it can parse all the
-	information from the raw bytestream.
-    * .. _V4L2-PIX-FMT-HEVC-SLICE:
-
-      - ``V4L2_PIX_FMT_HEVC_SLICE``
-      - 'S265'
-      - HEVC parsed slice data, as extracted from the HEVC bitstream.
-	This format is adapted for stateless video decoders that implement a
-	HEVC pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
-	This pixelformat has two modifiers that must be set at least once
-	through the ``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE``
-        and ``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE`` controls.
-	Metadata associated with the frame to decode is required to be passed
-	through the following controls :
-        * ``V4L2_CID_MPEG_VIDEO_HEVC_SPS``
-        * ``V4L2_CID_MPEG_VIDEO_HEVC_PPS``
-        * ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS``
-	See the :ref:`associated Codec Control IDs <v4l2-mpeg-hevc>`.
-	Buffers associated with this pixel format must contain the appropriate
-	number of macroblocks to decode a full corresponding frame.
-
-	.. note::
-
-	   This format is not yet part of the public kernel API and it
-	   is expected to change.
-    * .. _V4L2-PIX-FMT-FWHT:
-
-      - ``V4L2_PIX_FMT_FWHT``
-      - 'FWHT'
-      - Video elementary stream using a codec based on the Fast Walsh Hadamard
-        Transform. This codec is implemented by the vicodec ('Virtual Codec')
-	driver. See the codec-fwht.h header for more details.
-	:ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
-	since the decoder can parse all the information from the raw bytestream.
-    * .. _V4L2-PIX-FMT-FWHT-STATELESS:
-
-      - ``V4L2_PIX_FMT_FWHT_STATELESS``
-      - 'SFWH'
-      - Same format as V4L2_PIX_FMT_FWHT but requires stateless codec implementation.
-	See the :ref:`associated Codec Control IDs <v4l2-mpeg-fwht>`.
diff --git a/Documentation/media/uapi/v4l/pixfmt-grey.rst b/Documentation/media/uapi/v4l/pixfmt-grey.rst
deleted file mode 100644
index 3a8156164d39..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-grey.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-GREY:
-
-**************************
-V4L2_PIX_FMT_GREY ('GREY')
-**************************
-
-Grey-scale image
-
-
-Description
-===========
-
-This is a grey-scale image. It is really a degenerate Y'CbCr format
-which simply contains no Cb or Cr data.
-
-**Byte Order.**
-Each cell is one byte.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
diff --git a/Documentation/media/uapi/v4l/pixfmt-indexed.rst b/Documentation/media/uapi/v4l/pixfmt-indexed.rst
deleted file mode 100644
index 4538b425a046..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-indexed.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _pixfmt-indexed:
-
-**************
-Indexed Format
-**************
-
-In this format each pixel is represented by an 8 bit index into a 256
-entry ARGB palette. It is intended for
-:ref:`Video Output Overlays <osd>` only. There are no ioctls to access
-the palette, this must be done with ioctls of the Linux framebuffer API.
-
-
-
-.. flat-table:: Indexed Image Format
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`7` Byte 0
-    * -
-      -
-      - Bit
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _V4L2-PIX-FMT-PAL8:
-
-      - ``V4L2_PIX_FMT_PAL8``
-      - 'PAL8'
-      -
-      - i\ :sub:`7`
-      - i\ :sub:`6`
-      - i\ :sub:`5`
-      - i\ :sub:`4`
-      - i\ :sub:`3`
-      - i\ :sub:`2`
-      - i\ :sub:`1`
-      - i\ :sub:`0`
diff --git a/Documentation/media/uapi/v4l/pixfmt-intro.rst b/Documentation/media/uapi/v4l/pixfmt-intro.rst
deleted file mode 100644
index ca0a6e0d8959..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-intro.rst
+++ /dev/null
@@ -1,58 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-**********************
-Standard Image Formats
-**********************
-
-In order to exchange images between drivers and applications, it is
-necessary to have standard image data formats which both sides will
-interpret the same way. V4L2 includes several such formats, and this
-section is intended to be an unambiguous specification of the standard
-image data formats in V4L2.
-
-V4L2 drivers are not limited to these formats, however. Driver-specific
-formats are possible. In that case the application may depend on a codec
-to convert images to one of the standard formats when needed. But the
-data can still be stored and retrieved in the proprietary format. For
-example, a device may support a proprietary compressed format.
-Applications can still capture and save the data in the compressed
-format, saving much disk space, and later use a codec to convert the
-images to the X Windows screen format when the video is to be displayed.
-
-Even so, ultimately, some standard formats are needed, so the V4L2
-specification would not be complete without well-defined standard
-formats.
-
-The V4L2 standard formats are mainly uncompressed formats. The pixels
-are always arranged in memory from left to right, and from top to
-bottom. The first byte of data in the image buffer is always for the
-leftmost pixel of the topmost row. Following that is the pixel
-immediately to its right, and so on until the end of the top row of
-pixels. Following the rightmost pixel of the row there may be zero or
-more bytes of padding to guarantee that each row of pixel data has a
-certain alignment. Following the pad bytes, if any, is data for the
-leftmost pixel of the second row from the top, and so on. The last row
-has just as many pad bytes after it as the other rows.
-
-In V4L2 each format has an identifier which looks like ``PIX_FMT_XXX``,
-defined in the :ref:`videodev2.h <videodev>` header file. These
-identifiers represent
-:ref:`four character (FourCC) codes <v4l2-fourcc>` which are also
-listed below, however they are not the same as those used in the Windows
-world.
-
-For some formats, data is stored in separate, discontiguous memory
-buffers. Those formats are identified by a separate set of FourCC codes
-and are referred to as "multi-planar formats". For example, a
-:ref:`YUV422 <V4L2-PIX-FMT-YUV422M>` frame is normally stored in one
-memory buffer, but it can also be placed in two or three separate
-buffers, with Y component in one buffer and CbCr components in another
-in the 2-planar version or with each component in its own buffer in the
-3-planar case. Those sub-buffers are referred to as "*planes*".
diff --git a/Documentation/media/uapi/v4l/pixfmt-inzi.rst b/Documentation/media/uapi/v4l/pixfmt-inzi.rst
deleted file mode 100644
index af2940d844ff..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-inzi.rst
+++ /dev/null
@@ -1,89 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-INZI:
-
-**************************
-V4L2_PIX_FMT_INZI ('INZI')
-**************************
-
-Infrared 10-bit linked with Depth 16-bit images
-
-
-Description
-===========
-
-Proprietary multi-planar format used by Intel SR300 Depth cameras, comprise of
-Infrared image followed by Depth data. The pixel definition is 32-bpp,
-with the Depth and Infrared Data split into separate continuous planes of
-identical dimensions.
-
-
-
-The first plane - Infrared data - is stored according to
-:ref:`V4L2_PIX_FMT_Y10 <V4L2-PIX-FMT-Y10>` greyscale format.
-Each pixel is 16-bit cell, with actual data stored in the 10 LSBs
-with values in range 0 to 1023.
-The six remaining MSBs are padded with zeros.
-
-
-The second plane provides 16-bit per-pixel Depth data arranged in
-:ref:`V4L2-PIX-FMT-Z16 <V4L2-PIX-FMT-Z16>` format.
-
-
-**Frame Structure.**
-Each cell is a 16-bit word with more significant data stored at higher
-memory address (byte order is little-endian).
-
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{2.5cm}|p{2.5cm}|p{2.5cm}|p{2.5cm}|p{2.5cm}|p{2.5cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 1
-    :widths:    1 1 1 1 1 1
-
-    * - Ir\ :sub:`0,0`
-      - Ir\ :sub:`0,1`
-      - Ir\ :sub:`0,2`
-      - ...
-      - ...
-      - ...
-    * - :cspan:`5` ...
-    * - :cspan:`5` Infrared Data
-    * - :cspan:`5` ...
-    * - ...
-      - ...
-      - ...
-      - Ir\ :sub:`n-1,n-3`
-      - Ir\ :sub:`n-1,n-2`
-      - Ir\ :sub:`n-1,n-1`
-    * - Depth\ :sub:`0,0`
-      - Depth\ :sub:`0,1`
-      - Depth\ :sub:`0,2`
-      - ...
-      - ...
-      - ...
-    * - :cspan:`5` ...
-    * - :cspan:`5` Depth Data
-    * - :cspan:`5` ...
-    * - ...
-      - ...
-      - ...
-      - Depth\ :sub:`n-1,n-3`
-      - Depth\ :sub:`n-1,n-2`
-      - Depth\ :sub:`n-1,n-1`
-
-.. raw:: latex
-
-    \normalsize
diff --git a/Documentation/media/uapi/v4l/pixfmt-m420.rst b/Documentation/media/uapi/v4l/pixfmt-m420.rst
deleted file mode 100644
index c2bae959bf51..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-m420.rst
+++ /dev/null
@@ -1,133 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-M420:
-
-**************************
-V4L2_PIX_FMT_M420 ('M420')
-**************************
-
-Format with ½ horizontal and vertical chroma resolution, also known as
-YUV 4:2:0. Hybrid plane line-interleaved layout.
-
-
-Description
-===========
-
-M420 is a YUV format with ½ horizontal and vertical chroma subsampling
-(YUV 4:2:0). Pixels are organized as interleaved luma and chroma planes.
-Two lines of luma data are followed by one line of chroma data.
-
-The luma plane has one byte per pixel. The chroma plane contains
-interleaved CbCr pixels subsampled by ½ in the horizontal and vertical
-directions. Each CbCr pair belongs to four pixels. For example,
-Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`,
-Y'\ :sub:`10`, Y'\ :sub:`11`.
-
-All line lengths are identical: if the Y lines include pad bytes so do
-the CbCr lines.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start + 8:
-      - Cb\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Cb\ :sub:`01`
-      - Cr\ :sub:`01`
-    * - start + 16:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start + 20:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * - start + 24:
-      - Cb\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Cb\ :sub:`11`
-      - Cr\ :sub:`11`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * - 1
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-    * - 2
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * - 3
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst b/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst
deleted file mode 100644
index 87e8fd7d5d02..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst
+++ /dev/null
@@ -1,220 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-meta-fmt-d4xx:
-
-*******************************
-V4L2_META_FMT_D4XX ('D4XX')
-*******************************
-
-Intel D4xx UVC Cameras Metadata
-
-
-Description
-===========
-
-Intel D4xx (D435 and other) cameras include per-frame metadata in their UVC
-payload headers, following the Microsoft(R) UVC extension proposal [1_]. That
-means, that the private D4XX metadata, following the standard UVC header, is
-organised in blocks. D4XX cameras implement several standard block types,
-proposed by Microsoft, and several proprietary ones. Supported standard metadata
-types are MetadataId_CaptureStats (ID 3), MetadataId_CameraExtrinsics (ID 4),
-and MetadataId_CameraIntrinsics (ID 5). For their description see [1_]. This
-document describes proprietary metadata types, used by D4xx cameras.
-
-V4L2_META_FMT_D4XX buffers follow the metadata buffer layout of
-V4L2_META_FMT_UVC with the only difference, that it also includes proprietary
-payload header data. D4xx cameras use bulk transfers and only send one payload
-per frame, therefore their headers cannot be larger than 255 bytes.
-
-Below are proprietary Microsoft style metadata types, used by D4xx cameras,
-where all fields are in little endian order:
-
-.. tabularcolumns:: |p{5.0cm}|p{12.5cm}|
-
-
-.. flat-table:: D4xx metadata
-    :widths: 1 2
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - **Field**
-      - **Description**
-    * - :cspan:`1` *Depth Control*
-    * - __u32 ID
-      - 0x80000000
-    * - __u32 Size
-      - Size in bytes (currently 56)
-    * - __u32 Version
-      - Version of this structure. The documentation herein corresponds to
-        version xxx. The version number will be incremented when new fields are
-        added.
-    * - __u32 Flags
-      - A bitmask of flags: see [2_] below
-    * - __u32 Gain
-      - Gain value in internal units, same as the V4L2_CID_GAIN control, used to
-	capture the frame
-    * - __u32 Exposure
-      - Exposure time (in microseconds) used to capture the frame
-    * - __u32 Laser power
-      - Power of the laser LED 0-360, used for depth measurement
-    * - __u32 AE mode
-      - 0: manual; 1: automatic exposure
-    * - __u32 Exposure priority
-      - Exposure priority value: 0 - constant frame rate
-    * - __u32 AE ROI left
-      - Left border of the AE Region of Interest (all ROI values are in pixels
-	and lie between 0 and maximum width or height respectively)
-    * - __u32 AE ROI right
-      - Right border of the AE Region of Interest
-    * - __u32 AE ROI top
-      - Top border of the AE Region of Interest
-    * - __u32 AE ROI bottom
-      - Bottom border of the AE Region of Interest
-    * - __u32 Preset
-      - Preset selector value, default: 0, unless changed by the user
-    * - __u32 Laser mode
-      - 0: off, 1: on
-    * - :cspan:`1` *Capture Timing*
-    * - __u32 ID
-      - 0x80000001
-    * - __u32 Size
-      - Size in bytes (currently 40)
-    * - __u32 Version
-      - Version of this structure. The documentation herein corresponds to
-        version xxx. The version number will be incremented when new fields are
-        added.
-    * - __u32 Flags
-      - A bitmask of flags: see [3_] below
-    * - __u32 Frame counter
-      - Monotonically increasing counter
-    * - __u32 Optical time
-      - Time in microseconds from the beginning of a frame till its middle
-    * - __u32 Readout time
-      - Time, used to read out a frame in microseconds
-    * - __u32 Exposure time
-      - Frame exposure time in microseconds
-    * - __u32 Frame interval
-      - In microseconds = 1000000 / framerate
-    * - __u32 Pipe latency
-      - Time in microseconds from start of frame to data in USB buffer
-    * - :cspan:`1` *Configuration*
-    * - __u32 ID
-      - 0x80000002
-    * - __u32 Size
-      - Size in bytes (currently 40)
-    * - __u32 Version
-      - Version of this structure. The documentation herein corresponds to
-        version xxx. The version number will be incremented when new fields are
-        added.
-    * - __u32 Flags
-      - A bitmask of flags: see [4_] below
-    * - __u8 Hardware type
-      - Camera hardware version [5_]
-    * - __u8 SKU ID
-      - Camera hardware configuration [6_]
-    * - __u32 Cookie
-      - Internal synchronisation
-    * - __u16 Format
-      - Image format code [7_]
-    * - __u16 Width
-      - Width in pixels
-    * - __u16 Height
-      - Height in pixels
-    * - __u16 Framerate
-      - Requested frame rate per second
-    * - __u16 Trigger
-      - Byte 0: bit 0: depth and RGB are synchronised, bit 1: external trigger
-
-.. _1:
-
-[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5
-
-.. _2:
-
-[2] Depth Control flags specify which fields are valid: ::
-
-  0x00000001 Gain
-  0x00000002 Exposure
-  0x00000004 Laser power
-  0x00000008 AE mode
-  0x00000010 Exposure priority
-  0x00000020 AE ROI
-  0x00000040 Preset
-
-.. _3:
-
-[3] Capture Timing flags specify which fields are valid: ::
-
-  0x00000001 Frame counter
-  0x00000002 Optical time
-  0x00000004 Readout time
-  0x00000008 Exposure time
-  0x00000010 Frame interval
-  0x00000020 Pipe latency
-
-.. _4:
-
-[4] Configuration flags specify which fields are valid: ::
-
-  0x00000001 Hardware type
-  0x00000002 SKU ID
-  0x00000004 Cookie
-  0x00000008 Format
-  0x00000010 Width
-  0x00000020 Height
-  0x00000040 Framerate
-  0x00000080 Trigger
-  0x00000100 Cal count
-
-.. _5:
-
-[5] Camera model: ::
-
-  0 DS5
-  1 IVCAM2
-
-.. _6:
-
-[6] 8-bit camera hardware configuration bitfield: ::
-
-  [1:0] depthCamera
-	00: no depth
-	01: standard depth
-	10: wide depth
-	11: reserved
-  [2]   depthIsActive - has a laser projector
-  [3]   RGB presence
-  [4]   Inertial Measurement Unit (IMU) presence
-  [5]   projectorType
-	0: HPTG
-	1: Princeton
-  [6]   0: a projector, 1: an LED
-  [7]   reserved
-
-.. _7:
-
-[7] Image format codes per video streaming interface:
-
-Depth: ::
-
-  1 Z16
-  2 Z
-
-Left sensor: ::
-
-  1 Y8
-  2 UYVY
-  3 R8L8
-  4 Calibration
-  5 W10
-
-Fish Eye sensor: ::
-
-  1 RAW8
diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst b/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst
deleted file mode 100644
index 7fb54339f4a7..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst
+++ /dev/null
@@ -1,104 +0,0 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-..    modify it under the terms of the GNU General Public License version
-..    2.0 as published by the Free Software Foundation.
-..
-..    This file is distributed in the hope that it will be useful,
-..    but WITHOUT ANY WARRANTY; without even the implied warranty of
-..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-..    GNU General Public License version 2.0 for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-..    document under the terms of the GNU Free Documentation License,
-..    Version 1.1 or any later version published by the Free Software
-..    Foundation, with no Invariant Sections, no Front-Cover Texts
-..    and no Back-Cover Texts. A copy of the license is included at
-..    Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-meta-fmt-params:
-.. _v4l2-meta-fmt-stat-3a:
-
-******************************************************************
-V4L2_META_FMT_IPU3_PARAMS ('ip3p'), V4L2_META_FMT_IPU3_3A ('ip3s')
-******************************************************************
-
-.. ipu3_uapi_stats_3a
-
-3A statistics
-=============
-
-The IPU3 ImgU 3A statistics accelerators collect different statistics over
-an input Bayer frame. Those statistics are obtained from the "ipu3-imgu [01] 3a
-stat" metadata capture video nodes, using the :c:type:`v4l2_meta_format`
-interface. They are formatted as described by the :c:type:`ipu3_uapi_stats_3a`
-structure.
-
-The statistics collected are AWB (Auto-white balance) RGBS (Red, Green, Blue and
-Saturation measure) cells, AWB filter response, AF (Auto-focus) filter response,
-and AE (Auto-exposure) histogram.
-
-The struct :c:type:`ipu3_uapi_4a_config` saves all configurable parameters.
-
-.. code-block:: c
-
-	struct ipu3_uapi_stats_3a {
-		struct ipu3_uapi_awb_raw_buffer awb_raw_buffer;
-		struct ipu3_uapi_ae_raw_buffer_aligned ae_raw_buffer[IPU3_UAPI_MAX_STRIPES];
-		struct ipu3_uapi_af_raw_buffer af_raw_buffer;
-		struct ipu3_uapi_awb_fr_raw_buffer awb_fr_raw_buffer;
-		struct ipu3_uapi_4a_config stats_4a_config;
-		__u32 ae_join_buffers;
-		__u8 padding[28];
-		struct ipu3_uapi_stats_3a_bubble_info_per_stripe stats_3a_bubble_per_stripe;
-		struct ipu3_uapi_ff_status stats_3a_status;
-	};
-
-.. ipu3_uapi_params
-
-Pipeline parameters
-===================
-
-The pipeline parameters are passed to the "ipu3-imgu [01] parameters" metadata
-output video nodes, using the :c:type:`v4l2_meta_format` interface. They are
-formatted as described by the :c:type:`ipu3_uapi_params` structure.
-
-Both 3A statistics and pipeline parameters described here are closely tied to
-the underlying camera sub-system (CSS) APIs. They are usually consumed and
-produced by dedicated user space libraries that comprise the important tuning
-tools, thus freeing the developers from being bothered with the low level
-hardware and algorithm details.
-
-.. code-block:: c
-
-	struct ipu3_uapi_params {
-		/* Flags which of the settings below are to be applied */
-		struct ipu3_uapi_flags use;
-
-		/* Accelerator cluster parameters */
-		struct ipu3_uapi_acc_param acc_param;
-
-		/* ISP vector address space parameters */
-		struct ipu3_uapi_isp_lin_vmem_params lin_vmem_params;
-		struct ipu3_uapi_isp_tnr3_vmem_params tnr3_vmem_params;
-		struct ipu3_uapi_isp_xnr3_vmem_params xnr3_vmem_params;
-
-		/* ISP data memory (DMEM) parameters */
-		struct ipu3_uapi_isp_tnr3_params tnr3_dmem_params;
-		struct ipu3_uapi_isp_xnr3_params xnr3_dmem_params;
-
-		/* Optical black level compensation */
-		struct ipu3_uapi_obgrid_param obgrid_param;
-	};
-
-Intel IPU3 ImgU uAPI data types
-===============================
-
-.. kernel-doc:: drivers/staging/media/ipu3/include/intel-ipu3.h
diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst b/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst
deleted file mode 100644
index 481e4e0e6e1d..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst
+++ /dev/null
@@ -1,58 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-meta-fmt-uvc:
-
-*******************************
-V4L2_META_FMT_UVC ('UVCH')
-*******************************
-
-UVC Payload Header Data
-
-
-Description
-===========
-
-This format describes standard UVC metadata, extracted from UVC packet headers
-and provided by the UVC driver through metadata video nodes. That data includes
-exact copies of the standard part of UVC Payload Header contents and auxiliary
-timing information, required for precise interpretation of timestamps, contained
-in those headers. See section "2.4.3.3 Video and Still Image Payload Headers" of
-the "UVC 1.5 Class specification" for details.
-
-Each UVC payload header can be between 2 and 12 bytes large. Buffers can
-contain multiple headers, if multiple such headers have been transmitted by the
-camera for the respective frame. However, the driver may drop headers when the
-buffer is full, when they contain no useful information (e.g. those without the
-SCR field or with that field identical to the previous header), or generally to
-perform rate limiting when the device sends a large number of headers.
-
-Each individual block contains the following fields:
-
-.. flat-table:: UVC Metadata Block
-    :widths: 1 4
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Field
-      - Description
-    * - __u64 ts;
-      - system timestamp in host byte order, measured by the driver upon
-        reception of the payload
-    * - __u16 sof;
-      - USB Frame Number in host byte order, also obtained by the driver as
-        close as possible to the above timestamp to enable correlation between
-        them
-    * - :cspan:`1` *The rest is an exact copy of the UVC payload header:*
-    * - __u8 length;
-      - length of the rest of the block, including this field
-    * - __u8 flags;
-      - Flags, indicating presence of other standard UVC fields
-    * - __u8 buf[];
-      - The rest of the header, possibly including UVC PTS and SCR fields
diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-vivid.rst b/Documentation/media/uapi/v4l/pixfmt-meta-vivid.rst
deleted file mode 100644
index eed20eaefe24..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-meta-vivid.rst
+++ /dev/null
@@ -1,60 +0,0 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-..    modify it under the terms of the GNU General Public License as
-..    published by the Free Software Foundation version 2 of
-..    the License.
-..
-..    This file is distributed in the hope that it will be useful,
-..    but WITHOUT ANY WARRANTY; without even the implied warranty of
-..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-..    GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-..    document under the terms of the GNU Free Documentation License,
-..    Version 1.1 or any later version published by the Free Software
-..    Foundation, with no Invariant Sections, no Front-Cover Texts
-..    and no Back-Cover Texts. A copy of the license is included at
-..    Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-meta-fmt-vivid:
-
-*******************************
-V4L2_META_FMT_VIVID ('VIVD')
-*******************************
-
-VIVID Metadata Format
-
-
-Description
-===========
-
-This describes metadata format used by the vivid driver.
-
-It sets Brightness, Saturation, Contrast and Hue, each of which maps to
-corresponding controls of the vivid driver with respect to the range and default values.
-
-It contains the following fields:
-
-.. flat-table:: VIVID Metadata
-    :widths: 1 4
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Field
-      - Description
-    * - u16 brightness;
-      - Image brightness, the value is in the range 0 to 255, with the default value as 128.
-    * - u16 contrast;
-      - Image contrast, the value is in the range 0 to 255, with the default value as 128.
-    * - u16 saturation;
-      - Image color saturation, the value is in the range 0 to 255, with the default value as 128.
-    * - s16 hue;
-      - Image color balance, the value is in the range -128 to 128, with the default value as 0.
diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst
deleted file mode 100644
index f7a861696281..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst
+++ /dev/null
@@ -1,175 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-meta-fmt-vsp1-hgo:
-
-*******************************
-V4L2_META_FMT_VSP1_HGO ('VSPH')
-*******************************
-
-Renesas R-Car VSP1 1-D Histogram Data
-
-
-Description
-===========
-
-This format describes histogram data generated by the Renesas R-Car VSP1 1-D
-Histogram (HGO) engine.
-
-The VSP1 HGO is a histogram computation engine that can operate on RGB, YCrCb
-or HSV data. It operates on a possibly cropped and subsampled input image and
-computes the minimum, maximum and sum of all pixels as well as per-channel
-histograms.
-
-The HGO can compute histograms independently per channel, on the maximum of the
-three channels (RGB data only) or on the Y channel only (YCbCr only). It can
-additionally output the histogram with 64 or 256 bins, resulting in four
-possible modes of operation.
-
-- In *64 bins normal mode*, the HGO operates on the three channels independently
-  to compute three 64-bins histograms. RGB, YCbCr and HSV image formats are
-  supported.
-- In *64 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
-  channels to compute a single 64-bins histogram. Only the RGB image format is
-  supported.
-- In *256 bins normal mode*, the HGO operates on the Y channel to compute a
-  single 256-bins histogram. Only the YCbCr image format is supported.
-- In *256 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
-  channels to compute a single 256-bins histogram. Only the RGB image format is
-  supported.
-
-**Byte Order.**
-All data is stored in memory in little endian format. Each cell in the tables
-contains one byte.
-
-.. flat-table:: VSP1 HGO Data - 64 Bins, Normal Mode (792 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      -
-      - R/Cr/H max [7:0]
-      -
-      - R/Cr/H min [7:0]
-    * - 4
-      -
-      - G/Y/S max [7:0]
-      -
-      - G/Y/S min [7:0]
-    * - 8
-      -
-      - B/Cb/V max [7:0]
-      -
-      - B/Cb/V min [7:0]
-    * - 12
-      - :cspan:`4` R/Cr/H sum [31:0]
-    * - 16
-      - :cspan:`4` G/Y/S sum [31:0]
-    * - 20
-      - :cspan:`4` B/Cb/V sum [31:0]
-    * - 24
-      - :cspan:`4` R/Cr/H bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 276
-      - :cspan:`4` R/Cr/H bin 63 [31:0]
-    * - 280
-      - :cspan:`4` G/Y/S bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 532
-      - :cspan:`4` G/Y/S bin 63 [31:0]
-    * - 536
-      - :cspan:`4` B/Cb/V bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 788
-      - :cspan:`4` B/Cb/V bin 63 [31:0]
-
-.. flat-table:: VSP1 HGO Data - 64 Bins, Max Mode (264 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      -
-      - max(R,G,B) max [7:0]
-      -
-      - max(R,G,B) min [7:0]
-    * - 4
-      - :cspan:`4` max(R,G,B) sum [31:0]
-    * - 8
-      - :cspan:`4` max(R,G,B) bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 260
-      - :cspan:`4` max(R,G,B) bin 63 [31:0]
-
-.. flat-table:: VSP1 HGO Data - 256 Bins, Normal Mode (1032 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      -
-      - Y max [7:0]
-      -
-      - Y min [7:0]
-    * - 4
-      - :cspan:`4` Y sum [31:0]
-    * - 8
-      - :cspan:`4` Y bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 1028
-      - :cspan:`4` Y bin 255 [31:0]
-
-.. flat-table:: VSP1 HGO Data - 256 Bins, Max Mode (1032 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      -
-      - max(R,G,B) max [7:0]
-      -
-      - max(R,G,B) min [7:0]
-    * - 4
-      - :cspan:`4` max(R,G,B) sum [31:0]
-    * - 8
-      - :cspan:`4` max(R,G,B) bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 1028
-      - :cspan:`4` max(R,G,B) bin 255 [31:0]
diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst
deleted file mode 100644
index d1a341af9c48..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst
+++ /dev/null
@@ -1,136 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-meta-fmt-vsp1-hgt:
-
-*******************************
-V4L2_META_FMT_VSP1_HGT ('VSPT')
-*******************************
-
-Renesas R-Car VSP1 2-D Histogram Data
-
-
-Description
-===========
-
-This format describes histogram data generated by the Renesas R-Car VSP1
-2-D Histogram (HGT) engine.
-
-The VSP1 HGT is a histogram computation engine that operates on HSV
-data. It operates on a possibly cropped and subsampled input image and
-computes the sum, maximum and minimum of the S component as well as a
-weighted frequency histogram based on the H and S components.
-
-The histogram is a matrix of 6 Hue and 32 Saturation buckets, 192 in
-total. Each HSV value is added to one or more buckets with a weight
-between 1 and 16 depending on the Hue areas configuration. Finding the
-corresponding buckets is done by inspecting the H and S value independently.
-
-The Saturation position **n** (0 - 31) of the bucket in the matrix is
-found by the expression:
-
-    n = S / 8
-
-The Hue position **m** (0 - 5) of the bucket in the matrix depends on
-how the HGT Hue areas are configured. There are 6 user configurable Hue
-Areas which can be configured to cover overlapping Hue values:
-
-.. raw:: latex
-
-    \small
-
-::
-
-         Area 0       Area 1       Area 2       Area 3       Area 4       Area 5
-        ________     ________     ________     ________     ________     ________
-   \   /|      |\   /|      |\   /|      |\   /|      |\   /|      |\   /|      |\   /
-    \ / |      | \ / |      | \ / |      | \ / |      | \ / |      | \ / |      | \ /
-     X  |      |  X  |      |  X  |      |  X  |      |  X  |      |  X  |      |  X
-    / \ |      | / \ |      | / \ |      | / \ |      | / \ |      | / \ |      | / \
-   /   \|      |/   \|      |/   \|      |/   \|      |/   \|      |/   \|      |/   \
-  5U   0L      0U   1L      1U   2L      2U   3L      3U   4L      4U   5L      5U   0L
-        <0..............................Hue Value............................255>
-
-
-.. raw:: latex
-
-    \normalsize
-
-When two consecutive areas don't overlap (n+1L is equal to nU) the boundary
-value is considered as part of the lower area.
-
-Pixels with a hue value included in the centre of an area (between nL and nU
-included) are attributed to that single area and given a weight of 16. Pixels
-with a hue value included in the overlapping region between two areas (between
-n+1L and nU excluded) are attributed to both areas and given a weight for each
-of these areas proportional to their position along the diagonal lines
-(rounded down).
-
-The Hue area setup must match one of the following constrains:
-
-::
-
-    0L <= 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U
-
-::
-
-    0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U <= 0L
-
-**Byte Order.**
-All data is stored in memory in little endian format. Each cell in the tables
-contains one byte.
-
-.. flat-table:: VSP1 HGT Data - (776 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      - -
-      - S max [7:0]
-      - -
-      - S min [7:0]
-    * - 4
-      - :cspan:`4` S sum [31:0]
-    * - 8
-      - :cspan:`4` Histogram bucket (m=0, n=0) [31:0]
-    * - 12
-      - :cspan:`4` Histogram bucket (m=0, n=1) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 132
-      - :cspan:`4` Histogram bucket (m=0, n=31) [31:0]
-    * - 136
-      - :cspan:`4` Histogram bucket (m=1, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 264
-      - :cspan:`4` Histogram bucket (m=2, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 392
-      - :cspan:`4` Histogram bucket (m=3, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 520
-      - :cspan:`4` Histogram bucket (m=4, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 648
-      - :cspan:`4` Histogram bucket (m=5, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 772
-      - :cspan:`4` Histogram bucket (m=5, n=31) [31:0]
diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12.rst b/Documentation/media/uapi/v4l/pixfmt-nv12.rst
deleted file mode 100644
index b8c021b07fd2..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-nv12.rst
+++ /dev/null
@@ -1,136 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-NV12:
-.. _V4L2-PIX-FMT-NV21:
-
-******************************************************
-V4L2_PIX_FMT_NV12 ('NV12'), V4L2_PIX_FMT_NV21 ('NV21')
-******************************************************
-
-
-V4L2_PIX_FMT_NV21
-Formats with ½ horizontal and vertical chroma resolution, also known as
-YUV 4:2:0. One luminance and one chrominance plane with alternating
-chroma samples as opposed to ``V4L2_PIX_FMT_YVU420``
-
-
-Description
-===========
-
-These are two-plane versions of the YUV 4:2:0 format. The three
-components are separated into two sub-images or planes. The Y plane is
-first. The Y plane has one byte per pixel. For ``V4L2_PIX_FMT_NV12``, a
-combined CbCr plane immediately follows the Y plane in memory. The CbCr
-plane is the same width, in bytes, as the Y plane (and of the image),
-but is half as tall in pixels. Each CbCr pair belongs to four pixels.
-For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`,
-Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`. ``V4L2_PIX_FMT_NV21`` is
-the same except the Cb and Cr bytes are swapped, the CrCb plane starts
-with a Cr byte.
-
-If the Y plane has pad bytes after each row, then the CbCr plane has as
-many pad bytes after its rows.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * - start + 16:
-      - Cb\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Cb\ :sub:`01`
-      - Cr\ :sub:`01`
-    * - start + 20:
-      - Cb\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Cb\ :sub:`11`
-      - Cr\ :sub:`11`
-
-
-**Color Sample Location:**
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * - 1
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-    * - 2
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * - 3
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12m.rst b/Documentation/media/uapi/v4l/pixfmt-nv12m.rst
deleted file mode 100644
index 9b2c5c21280a..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-nv12m.rst
+++ /dev/null
@@ -1,151 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-NV12M:
-.. _v4l2-pix-fmt-nv12mt-16x16:
-.. _V4L2-PIX-FMT-NV21M:
-
-***********************************************************************************
-V4L2_PIX_FMT_NV12M ('NM12'), V4L2_PIX_FMT_NV21M ('NM21'), V4L2_PIX_FMT_NV12MT_16X16
-***********************************************************************************
-
-
-V4L2_PIX_FMT_NV21M
-V4L2_PIX_FMT_NV12MT_16X16
-Variation of ``V4L2_PIX_FMT_NV12`` and ``V4L2_PIX_FMT_NV21`` with planes
-non contiguous in memory.
-
-
-Description
-===========
-
-This is a multi-planar, two-plane version of the YUV 4:2:0 format. The
-three components are separated into two sub-images or planes.
-``V4L2_PIX_FMT_NV12M`` differs from ``V4L2_PIX_FMT_NV12`` in that the
-two planes are non-contiguous in memory, i.e. the chroma plane do not
-necessarily immediately follows the luma plane. The luminance data
-occupies the first plane. The Y plane has one byte per pixel. In the
-second plane there is a chrominance data with alternating chroma
-samples. The CbCr plane is the same width, in bytes, as the Y plane (and
-of the image), but is half as tall in pixels. Each CbCr pair belongs to
-four pixels. For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to
-Y'\ :sub:`00`, Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
-``V4L2_PIX_FMT_NV12MT_16X16`` is the tiled version of
-``V4L2_PIX_FMT_NV12M`` with 16x16 macroblock tiles. Here pixels are
-arranged in 16x16 2D tiles and tiles are arranged in linear order in
-memory. ``V4L2_PIX_FMT_NV21M`` is the same as ``V4L2_PIX_FMT_NV12M``
-except the Cb and Cr bytes are swapped, the CrCb plane starts with a Cr
-byte.
-
-``V4L2_PIX_FMT_NV12M`` is intended to be used only in drivers and
-applications that support the multi-planar API, described in
-:ref:`planar-apis`.
-
-If the Y plane has pad bytes after each row, then the CbCr plane has as
-many pad bytes after its rows.
-
-**Byte Order.**
-Each cell is one byte.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start0 + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start0 + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start0 + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start0 + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * -
-    * - start1 + 0:
-      - Cb\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Cb\ :sub:`01`
-      - Cr\ :sub:`01`
-    * - start1 + 4:
-      - Cb\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Cb\ :sub:`11`
-      - Cr\ :sub:`11`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * - 1
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-    * - 2
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      -
-      - C
-      -
-    * - 3
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst b/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst
deleted file mode 100644
index 2092725de33c..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst
+++ /dev/null
@@ -1,67 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-NV12MT:
-
-****************************
-V4L2_PIX_FMT_NV12MT ('TM12')
-****************************
-
-Formats with ½ horizontal and vertical chroma resolution. This format
-has two planes - one for luminance and one for chrominance. Chroma
-samples are interleaved. The difference to ``V4L2_PIX_FMT_NV12`` is the
-memory layout. Pixels are grouped in macroblocks of 64x32 size. The
-order of macroblocks in memory is also not standard.
-
-
-Description
-===========
-
-This is the two-plane versions of the YUV 4:2:0 format where data is
-grouped into 64x32 macroblocks. The three components are separated into
-two sub-images or planes. The Y plane has one byte per pixel and pixels
-are grouped into 64x32 macroblocks. The CbCr plane has the same width,
-in bytes, as the Y plane (and the image), but is half as tall in pixels.
-The chroma plane is also grouped into 64x32 macroblocks.
-
-Width of the buffer has to be aligned to the multiple of 128, and height
-alignment is 32. Every four adjacent buffers - two horizontally and two
-vertically are grouped together and are located in memory in Z or
-flipped Z order.
-
-Layout of macroblocks in memory is presented in the following figure.
-
-
-.. _nv12mt:
-
-.. kernel-figure:: nv12mt.svg
-    :alt:    nv12mt.svg
-    :align:  center
-
-    V4L2_PIX_FMT_NV12MT macroblock Z shape memory layout
-
-The requirement that width is multiple of 128 is implemented because,
-the Z shape cannot be cut in half horizontally. In case the vertical
-resolution of macroblocks is odd then the last row of macroblocks is
-arranged in a linear order.
-
-In case of chroma the layout is identical. Cb and Cr samples are
-interleaved. Height of the buffer is aligned to 32.
-
-
-.. _nv12mt_ex:
-
-.. kernel-figure:: nv12mt_example.svg
-    :alt:    nv12mt_example.svg
-    :align:  center
-
-    Example V4L2_PIX_FMT_NV12MT memory layout of macroblocks
-
-Memory layout of macroblocks of ``V4L2_PIX_FMT_NV12MT`` format in most
-extreme case.
diff --git a/Documentation/media/uapi/v4l/pixfmt-nv16.rst b/Documentation/media/uapi/v4l/pixfmt-nv16.rst
deleted file mode 100644
index 5ec4b7fa8f04..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-nv16.rst
+++ /dev/null
@@ -1,160 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-NV16:
-.. _V4L2-PIX-FMT-NV61:
-
-******************************************************
-V4L2_PIX_FMT_NV16 ('NV16'), V4L2_PIX_FMT_NV61 ('NV61')
-******************************************************
-
-V4L2_PIX_FMT_NV61
-Formats with ½ horizontal chroma resolution, also known as YUV 4:2:2.
-One luminance and one chrominance plane with alternating chroma samples
-as opposed to ``V4L2_PIX_FMT_YVU420``
-
-
-Description
-===========
-
-These are two-plane versions of the YUV 4:2:2 format. The three
-components are separated into two sub-images or planes. The Y plane is
-first. The Y plane has one byte per pixel. For ``V4L2_PIX_FMT_NV16``, a
-combined CbCr plane immediately follows the Y plane in memory. The CbCr
-plane is the same width and height, in bytes, as the Y plane (and of the
-image). Each CbCr pair belongs to two pixels. For example,
-Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`.
-``V4L2_PIX_FMT_NV61`` is the same except the Cb and Cr bytes are
-swapped, the CrCb plane starts with a Cr byte.
-
-If the Y plane has pad bytes after each row, then the CbCr plane has as
-many pad bytes after its rows.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * - start + 16:
-      - Cb\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Cb\ :sub:`01`
-      - Cr\ :sub:`01`
-    * - start + 20:
-      - Cb\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Cb\ :sub:`11`
-      - Cr\ :sub:`11`
-    * - start + 24:
-      - Cb\ :sub:`20`
-      - Cr\ :sub:`20`
-      - Cb\ :sub:`21`
-      - Cr\ :sub:`21`
-    * - start + 28:
-      - Cb\ :sub:`30`
-      - Cr\ :sub:`30`
-      - Cb\ :sub:`31`
-      - Cr\ :sub:`31`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * - 1
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * -
-    * - 2
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * - 3
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
diff --git a/Documentation/media/uapi/v4l/pixfmt-nv16m.rst b/Documentation/media/uapi/v4l/pixfmt-nv16m.rst
deleted file mode 100644
index 4a63bcf18b70..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-nv16m.rst
+++ /dev/null
@@ -1,164 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-NV16M:
-.. _v4l2-pix-fmt-nv61m:
-
-********************************************************
-V4L2_PIX_FMT_NV16M ('NM16'), V4L2_PIX_FMT_NV61M ('NM61')
-********************************************************
-
-V4L2_PIX_FMT_NV61M
-Variation of ``V4L2_PIX_FMT_NV16`` and ``V4L2_PIX_FMT_NV61`` with planes
-non contiguous in memory.
-
-
-Description
-===========
-
-This is a multi-planar, two-plane version of the YUV 4:2:2 format. The
-three components are separated into two sub-images or planes.
-``V4L2_PIX_FMT_NV16M`` differs from ``V4L2_PIX_FMT_NV16`` in that the
-two planes are non-contiguous in memory, i.e. the chroma plane does not
-necessarily immediately follow the luma plane. The luminance data
-occupies the first plane. The Y plane has one byte per pixel. In the
-second plane there is chrominance data with alternating chroma samples.
-The CbCr plane is the same width and height, in bytes, as the Y plane.
-Each CbCr pair belongs to two pixels. For example,
-Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`.
-``V4L2_PIX_FMT_NV61M`` is the same as ``V4L2_PIX_FMT_NV16M`` except the
-Cb and Cr bytes are swapped, the CrCb plane starts with a Cr byte.
-
-``V4L2_PIX_FMT_NV16M`` and ``V4L2_PIX_FMT_NV61M`` are intended to be
-used only in drivers and applications that support the multi-planar API,
-described in :ref:`planar-apis`.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start0 + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start0 + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start0 + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start0 + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * -
-    * - start1 + 0:
-      - Cb\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Cb\ :sub:`02`
-      - Cr\ :sub:`02`
-    * - start1 + 4:
-      - Cb\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Cb\ :sub:`12`
-      - Cr\ :sub:`12`
-    * - start1 + 8:
-      - Cb\ :sub:`20`
-      - Cr\ :sub:`20`
-      - Cb\ :sub:`22`
-      - Cr\ :sub:`22`
-    * - start1 + 12:
-      - Cb\ :sub:`30`
-      - Cr\ :sub:`30`
-      - Cb\ :sub:`32`
-      - Cr\ :sub:`32`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * - 1
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * -
-    * - 2
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
-    * - 3
-      - Y
-      -
-      - Y
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      - C
-      -
diff --git a/Documentation/media/uapi/v4l/pixfmt-nv24.rst b/Documentation/media/uapi/v4l/pixfmt-nv24.rst
deleted file mode 100644
index 13fc6fe1a3d6..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-nv24.rst
+++ /dev/null
@@ -1,102 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-NV24:
-.. _V4L2-PIX-FMT-NV42:
-
-******************************************************
-V4L2_PIX_FMT_NV24 ('NV24'), V4L2_PIX_FMT_NV42 ('NV42')
-******************************************************
-
-V4L2_PIX_FMT_NV42
-Formats with full horizontal and vertical chroma resolutions, also known
-as YUV 4:4:4. One luminance and one chrominance plane with alternating
-chroma samples as opposed to ``V4L2_PIX_FMT_YVU420``
-
-
-Description
-===========
-
-These are two-plane versions of the YUV 4:4:4 format. The three
-components are separated into two sub-images or planes. The Y plane is
-first, with each Y sample stored in one byte per pixel. For
-``V4L2_PIX_FMT_NV24``, a combined CbCr plane immediately follows the Y
-plane in memory. The CbCr plane has the same width and height, in
-pixels, as the Y plane (and the image). Each line contains one CbCr pair
-per pixel, with each Cb and Cr sample stored in one byte.
-``V4L2_PIX_FMT_NV42`` is the same except that the Cb and Cr samples are
-swapped, the CrCb plane starts with a Cr sample.
-
-If the Y plane has pad bytes after each row, then the CbCr plane has
-twice as many pad bytes after its rows.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * - start + 16:
-      - Cb\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Cb\ :sub:`01`
-      - Cr\ :sub:`01`
-      - Cb\ :sub:`02`
-      - Cr\ :sub:`02`
-      - Cb\ :sub:`03`
-      - Cr\ :sub:`03`
-    * - start + 24:
-      - Cb\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Cb\ :sub:`11`
-      - Cr\ :sub:`11`
-      - Cb\ :sub:`12`
-      - Cr\ :sub:`12`
-      - Cb\ :sub:`13`
-      - Cr\ :sub:`13`
-    * - start + 32:
-      - Cb\ :sub:`20`
-      - Cr\ :sub:`20`
-      - Cb\ :sub:`21`
-      - Cr\ :sub:`21`
-      - Cb\ :sub:`22`
-      - Cr\ :sub:`22`
-      - Cb\ :sub:`23`
-      - Cr\ :sub:`23`
-    * - start + 40:
-      - Cb\ :sub:`30`
-      - Cr\ :sub:`30`
-      - Cb\ :sub:`31`
-      - Cr\ :sub:`31`
-      - Cb\ :sub:`32`
-      - Cr\ :sub:`32`
-      - Cb\ :sub:`33`
-      - Cr\ :sub:`33`
diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst b/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst
deleted file mode 100644
index dfc4a8367b3d..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst
+++ /dev/null
@@ -1,164 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _packed-hsv:
-
-******************
-Packed HSV formats
-******************
-
-Description
-===========
-
-The *hue* (h) is measured in degrees, the equivalence between degrees and LSBs
-depends on the hsv-encoding used, see :ref:`colorspaces`.
-The *saturation* (s) and the *value* (v) are measured in percentage of the
-cylinder: 0 being the smallest value and 255 the maximum.
-
-
-The values are packed in 24 or 32 bit formats.
-
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{2.6cm}|p{0.8cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _packed-hsv-formats:
-
-.. flat-table:: Packed HSV Image Formats
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`7` Byte 0 in memory
-      - :cspan:`7` Byte 1
-      - :cspan:`7` Byte 2
-      - :cspan:`7` Byte 3
-    * -
-      -
-      - Bit
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _V4L2-PIX-FMT-HSV32:
-
-      - ``V4L2_PIX_FMT_HSV32``
-      - 'HSV4'
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-
-      - h\ :sub:`7`
-      - h\ :sub:`6`
-      - h\ :sub:`5`
-      - h\ :sub:`4`
-      - h\ :sub:`3`
-      - h\ :sub:`2`
-      - h\ :sub:`1`
-      - h\ :sub:`0`
-
-      - s\ :sub:`7`
-      - s\ :sub:`6`
-      - s\ :sub:`5`
-      - s\ :sub:`4`
-      - s\ :sub:`3`
-      - s\ :sub:`2`
-      - s\ :sub:`1`
-      - s\ :sub:`0`
-
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _V4L2-PIX-FMT-HSV24:
-
-      - ``V4L2_PIX_FMT_HSV24``
-      - 'HSV3'
-      -
-      - h\ :sub:`7`
-      - h\ :sub:`6`
-      - h\ :sub:`5`
-      - h\ :sub:`4`
-      - h\ :sub:`3`
-      - h\ :sub:`2`
-      - h\ :sub:`1`
-      - h\ :sub:`0`
-
-      - s\ :sub:`7`
-      - s\ :sub:`6`
-      - s\ :sub:`5`
-      - s\ :sub:`4`
-      - s\ :sub:`3`
-      - s\ :sub:`2`
-      - s\ :sub:`1`
-      - s\ :sub:`0`
-
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      -
-
-.. raw:: latex
-
-    \endgroup
-
-Bit 7 is the most significant bit.
diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst b/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst
deleted file mode 100644
index 41b60fae703a..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst
+++ /dev/null
@@ -1,380 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _packed-yuv:
-
-******************
-Packed YUV formats
-******************
-
-Description
-===========
-
-Similar to the packed RGB formats these formats store the Y, Cb and Cr
-component of each pixel in one 16 or 32 bit word.
-
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. _packed-yuv-formats:
-
-.. tabularcolumns:: |p{2.5cm}|p{0.69cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|
-
-.. flat-table:: Packed YUV Image Formats
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Identifier
-      - Code
-
-      - :cspan:`7` Byte 0 in memory
-
-      - :cspan:`7` Byte 1
-
-      - :cspan:`7` Byte 2
-
-      - :cspan:`7` Byte 3
-
-    * -
-      -
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-    * .. _V4L2-PIX-FMT-YUV444:
-
-      - ``V4L2_PIX_FMT_YUV444``
-      - 'Y444'
-
-      - Cb\ :sub:`3`
-      - Cb\ :sub:`2`
-      - Cb\ :sub:`1`
-      - Cb\ :sub:`0`
-      - Cr\ :sub:`3`
-      - Cr\ :sub:`2`
-      - Cr\ :sub:`1`
-      - Cr\ :sub:`0`
-
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-      - Y'\ :sub:`3`
-      - Y'\ :sub:`2`
-      - Y'\ :sub:`1`
-      - Y'\ :sub:`0`
-
-      -  :cspan:`15`
-
-    * .. _V4L2-PIX-FMT-YUV555:
-
-      - ``V4L2_PIX_FMT_YUV555``
-      - 'YUVO'
-
-      - Cb\ :sub:`2`
-      - Cb\ :sub:`1`
-      - Cb\ :sub:`0`
-      - Cr\ :sub:`4`
-      - Cr\ :sub:`3`
-      - Cr\ :sub:`2`
-      - Cr\ :sub:`1`
-      - Cr\ :sub:`0`
-
-      - a
-      - Y'\ :sub:`4`
-      - Y'\ :sub:`3`
-      - Y'\ :sub:`2`
-      - Y'\ :sub:`1`
-      - Y'\ :sub:`0`
-      - Cb\ :sub:`4`
-      - Cb\ :sub:`3`
-
-      -  :cspan:`15`
-    * .. _V4L2-PIX-FMT-YUV565:
-
-      - ``V4L2_PIX_FMT_YUV565``
-      - 'YUVP'
-
-      - Cb\ :sub:`2`
-      - Cb\ :sub:`1`
-      - Cb\ :sub:`0`
-      - Cr\ :sub:`4`
-      - Cr\ :sub:`3`
-      - Cr\ :sub:`2`
-      - Cr\ :sub:`1`
-      - Cr\ :sub:`0`
-
-      - Y'\ :sub:`4`
-      - Y'\ :sub:`3`
-      - Y'\ :sub:`2`
-      - Y'\ :sub:`1`
-      - Y'\ :sub:`0`
-      - Cb\ :sub:`5`
-      - Cb\ :sub:`4`
-      - Cb\ :sub:`3`
-
-      -  :cspan:`15`
-
-    * .. _V4L2-PIX-FMT-YUV32:
-
-      - ``V4L2_PIX_FMT_YUV32``
-      - 'YUV4'
-
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-
-      - Y'\ :sub:`7`
-      - Y'\ :sub:`6`
-      - Y'\ :sub:`5`
-      - Y'\ :sub:`4`
-      - Y'\ :sub:`3`
-      - Y'\ :sub:`2`
-      - Y'\ :sub:`1`
-      - Y'\ :sub:`0`
-
-      - Cb\ :sub:`7`
-      - Cb\ :sub:`6`
-      - Cb\ :sub:`5`
-      - Cb\ :sub:`4`
-      - Cb\ :sub:`3`
-      - Cb\ :sub:`2`
-      - Cb\ :sub:`1`
-      - Cb\ :sub:`0`
-
-      - Cr\ :sub:`7`
-      - Cr\ :sub:`6`
-      - Cr\ :sub:`5`
-      - Cr\ :sub:`4`
-      - Cr\ :sub:`3`
-      - Cr\ :sub:`2`
-      - Cr\ :sub:`1`
-      - Cr\ :sub:`0`
-
-    * .. _V4L2-PIX-FMT-AYUV32:
-
-      - ``V4L2_PIX_FMT_AYUV32``
-      - 'AYUV'
-
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-
-      - Y'\ :sub:`7`
-      - Y'\ :sub:`6`
-      - Y'\ :sub:`5`
-      - Y'\ :sub:`4`
-      - Y'\ :sub:`3`
-      - Y'\ :sub:`2`
-      - Y'\ :sub:`1`
-      - Y'\ :sub:`0`
-
-      - Cb\ :sub:`7`
-      - Cb\ :sub:`6`
-      - Cb\ :sub:`5`
-      - Cb\ :sub:`4`
-      - Cb\ :sub:`3`
-      - Cb\ :sub:`2`
-      - Cb\ :sub:`1`
-      - Cb\ :sub:`0`
-
-      - Cr\ :sub:`7`
-      - Cr\ :sub:`6`
-      - Cr\ :sub:`5`
-      - Cr\ :sub:`4`
-      - Cr\ :sub:`3`
-      - Cr\ :sub:`2`
-      - Cr\ :sub:`1`
-      - Cr\ :sub:`0`
-
-    * .. _V4L2-PIX-FMT-XYUV32:
-
-      - ``V4L2_PIX_FMT_XYUV32``
-      - 'XYUV'
-
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-
-      - Y'\ :sub:`7`
-      - Y'\ :sub:`6`
-      - Y'\ :sub:`5`
-      - Y'\ :sub:`4`
-      - Y'\ :sub:`3`
-      - Y'\ :sub:`2`
-      - Y'\ :sub:`1`
-      - Y'\ :sub:`0`
-
-      - Cb\ :sub:`7`
-      - Cb\ :sub:`6`
-      - Cb\ :sub:`5`
-      - Cb\ :sub:`4`
-      - Cb\ :sub:`3`
-      - Cb\ :sub:`2`
-      - Cb\ :sub:`1`
-      - Cb\ :sub:`0`
-
-      - Cr\ :sub:`7`
-      - Cr\ :sub:`6`
-      - Cr\ :sub:`5`
-      - Cr\ :sub:`4`
-      - Cr\ :sub:`3`
-      - Cr\ :sub:`2`
-      - Cr\ :sub:`1`
-      - Cr\ :sub:`0`
-
-    * .. _V4L2-PIX-FMT-VUYA32:
-
-      - ``V4L2_PIX_FMT_VUYA32``
-      - 'VUYA'
-
-      - Cr\ :sub:`7`
-      - Cr\ :sub:`6`
-      - Cr\ :sub:`5`
-      - Cr\ :sub:`4`
-      - Cr\ :sub:`3`
-      - Cr\ :sub:`2`
-      - Cr\ :sub:`1`
-      - Cr\ :sub:`0`
-
-      - Cb\ :sub:`7`
-      - Cb\ :sub:`6`
-      - Cb\ :sub:`5`
-      - Cb\ :sub:`4`
-      - Cb\ :sub:`3`
-      - Cb\ :sub:`2`
-      - Cb\ :sub:`1`
-      - Cb\ :sub:`0`
-
-      - Y'\ :sub:`7`
-      - Y'\ :sub:`6`
-      - Y'\ :sub:`5`
-      - Y'\ :sub:`4`
-      - Y'\ :sub:`3`
-      - Y'\ :sub:`2`
-      - Y'\ :sub:`1`
-      - Y'\ :sub:`0`
-
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-
-    * .. _V4L2-PIX-FMT-VUYX32:
-
-      - ``V4L2_PIX_FMT_VUYX32``
-      - 'VUYX'
-
-      - Cr\ :sub:`7`
-      - Cr\ :sub:`6`
-      - Cr\ :sub:`5`
-      - Cr\ :sub:`4`
-      - Cr\ :sub:`3`
-      - Cr\ :sub:`2`
-      - Cr\ :sub:`1`
-      - Cr\ :sub:`0`
-
-      - Cb\ :sub:`7`
-      - Cb\ :sub:`6`
-      - Cb\ :sub:`5`
-      - Cb\ :sub:`4`
-      - Cb\ :sub:`3`
-      - Cb\ :sub:`2`
-      - Cb\ :sub:`1`
-      - Cb\ :sub:`0`
-
-      - Y'\ :sub:`7`
-      - Y'\ :sub:`6`
-      - Y'\ :sub:`5`
-      - Y'\ :sub:`4`
-      - Y'\ :sub:`3`
-      - Y'\ :sub:`2`
-      - Y'\ :sub:`1`
-      - Y'\ :sub:`0`
-
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-
-.. raw:: latex
-
-    \endgroup
-
-.. note::
-
-    #) Bit 7 is the most significant bit;
-
-    #) The value of a = alpha bits is undefined when reading from the driver,
-       ignored when writing to the driver, except when alpha blending has
-       been negotiated for a :ref:`Video Overlay <overlay>` or
-       :ref:`Video Output Overlay <osd>` for the formats Y444, YUV555 and
-       YUV4. However, for formats AYUV32 and VUYA32, the alpha component is
-       expected to contain a meaningful value that can be used by drivers
-       and applications. And, the formats XYUV32 and VUYX32 contain undefined
-       alpha values that must be ignored by all applications and drivers.
diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
deleted file mode 100644
index 7d98a7bf9f1f..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst
+++ /dev/null
@@ -1,282 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _pixfmt-reserved:
-
-***************************
-Reserved Format Identifiers
-***************************
-
-These formats are not defined by this specification, they are just
-listed for reference and to avoid naming conflicts. If you want to
-register your own format, send an e-mail to the linux-media mailing list
-`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__
-for inclusion in the ``videodev2.h`` file. If you want to share your
-format with other developers add a link to your documentation and send a
-copy to the linux-media mailing list for inclusion in this section. If
-you think your format should be listed in a standard format section
-please make a proposal on the linux-media mailing list.
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _reserved-formats:
-
-.. flat-table:: Reserved Image Formats
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - Identifier
-      - Code
-      - Details
-    * .. _V4L2-PIX-FMT-DV:
-
-      - ``V4L2_PIX_FMT_DV``
-      - 'dvsd'
-      - unknown
-    * .. _V4L2-PIX-FMT-ET61X251:
-
-      - ``V4L2_PIX_FMT_ET61X251``
-      - 'E625'
-      - Compressed format of the ET61X251 driver.
-    * .. _V4L2-PIX-FMT-HI240:
-
-      - ``V4L2_PIX_FMT_HI240``
-      - 'HI24'
-      - 8 bit RGB format used by the BTTV driver.
-    * .. _V4L2-PIX-FMT-HM12:
-
-      - ``V4L2_PIX_FMT_HM12``
-      - 'HM12'
-      - YUV 4:2:0 format used by the IVTV driver.
-
-	The format is documented in the kernel sources in the file
-	``Documentation/media/v4l-drivers/cx2341x.rst``
-    * .. _V4L2-PIX-FMT-CPIA1:
-
-      - ``V4L2_PIX_FMT_CPIA1``
-      - 'CPIA'
-      - YUV format used by the gspca cpia1 driver.
-    * .. _V4L2-PIX-FMT-JPGL:
-
-      - ``V4L2_PIX_FMT_JPGL``
-      - 'JPGL'
-      - JPEG-Light format (Pegasus Lossless JPEG) used in Divio webcams NW
-	80x.
-    * .. _V4L2-PIX-FMT-SPCA501:
-
-      - ``V4L2_PIX_FMT_SPCA501``
-      - 'S501'
-      - YUYV per line used by the gspca driver.
-    * .. _V4L2-PIX-FMT-SPCA505:
-
-      - ``V4L2_PIX_FMT_SPCA505``
-      - 'S505'
-      - YYUV per line used by the gspca driver.
-    * .. _V4L2-PIX-FMT-SPCA508:
-
-      - ``V4L2_PIX_FMT_SPCA508``
-      - 'S508'
-      - YUVY per line used by the gspca driver.
-    * .. _V4L2-PIX-FMT-SPCA561:
-
-      - ``V4L2_PIX_FMT_SPCA561``
-      - 'S561'
-      - Compressed GBRG Bayer format used by the gspca driver.
-    * .. _V4L2-PIX-FMT-PAC207:
-
-      - ``V4L2_PIX_FMT_PAC207``
-      - 'P207'
-      - Compressed BGGR Bayer format used by the gspca driver.
-    * .. _V4L2-PIX-FMT-MR97310A:
-
-      - ``V4L2_PIX_FMT_MR97310A``
-      - 'M310'
-      - Compressed BGGR Bayer format used by the gspca driver.
-    * .. _V4L2-PIX-FMT-JL2005BCD:
-
-      - ``V4L2_PIX_FMT_JL2005BCD``
-      - 'JL20'
-      - JPEG compressed RGGB Bayer format used by the gspca driver.
-    * .. _V4L2-PIX-FMT-OV511:
-
-      - ``V4L2_PIX_FMT_OV511``
-      - 'O511'
-      - OV511 JPEG format used by the gspca driver.
-    * .. _V4L2-PIX-FMT-OV518:
-
-      - ``V4L2_PIX_FMT_OV518``
-      - 'O518'
-      - OV518 JPEG format used by the gspca driver.
-    * .. _V4L2-PIX-FMT-PJPG:
-
-      - ``V4L2_PIX_FMT_PJPG``
-      - 'PJPG'
-      - Pixart 73xx JPEG format used by the gspca driver.
-    * .. _V4L2-PIX-FMT-SE401:
-
-      - ``V4L2_PIX_FMT_SE401``
-      - 'S401'
-      - Compressed RGB format used by the gspca se401 driver
-    * .. _V4L2-PIX-FMT-SQ905C:
-
-      - ``V4L2_PIX_FMT_SQ905C``
-      - '905C'
-      - Compressed RGGB bayer format used by the gspca driver.
-    * .. _V4L2-PIX-FMT-MJPEG:
-
-      - ``V4L2_PIX_FMT_MJPEG``
-      - 'MJPG'
-      - Compressed format used by the Zoran driver
-    * .. _V4L2-PIX-FMT-PWC1:
-
-      - ``V4L2_PIX_FMT_PWC1``
-      - 'PWC1'
-      - Compressed format of the PWC driver.
-    * .. _V4L2-PIX-FMT-PWC2:
-
-      - ``V4L2_PIX_FMT_PWC2``
-      - 'PWC2'
-      - Compressed format of the PWC driver.
-    * .. _V4L2-PIX-FMT-SN9C10X:
-
-      - ``V4L2_PIX_FMT_SN9C10X``
-      - 'S910'
-      - Compressed format of the SN9C102 driver.
-    * .. _V4L2-PIX-FMT-SN9C20X-I420:
-
-      - ``V4L2_PIX_FMT_SN9C20X_I420``
-      - 'S920'
-      - YUV 4:2:0 format of the gspca sn9c20x driver.
-    * .. _V4L2-PIX-FMT-SN9C2028:
-
-      - ``V4L2_PIX_FMT_SN9C2028``
-      - 'SONX'
-      - Compressed GBRG bayer format of the gspca sn9c2028 driver.
-    * .. _V4L2-PIX-FMT-STV0680:
-
-      - ``V4L2_PIX_FMT_STV0680``
-      - 'S680'
-      - Bayer format of the gspca stv0680 driver.
-    * .. _V4L2-PIX-FMT-WNVA:
-
-      - ``V4L2_PIX_FMT_WNVA``
-      - 'WNVA'
-      - Used by the Winnov Videum driver,
-	`http://www.thedirks.org/winnov/ <http://www.thedirks.org/winnov/>`__
-    * .. _V4L2-PIX-FMT-TM6000:
-
-      - ``V4L2_PIX_FMT_TM6000``
-      - 'TM60'
-      - Used by Trident tm6000
-    * .. _V4L2-PIX-FMT-CIT-YYVYUY:
-
-      - ``V4L2_PIX_FMT_CIT_YYVYUY``
-      - 'CITV'
-      - Used by xirlink CIT, found at IBM webcams.
-
-	Uses one line of Y then 1 line of VYUY
-    * .. _V4L2-PIX-FMT-KONICA420:
-
-      - ``V4L2_PIX_FMT_KONICA420``
-      - 'KONI'
-      - Used by Konica webcams.
-
-	YUV420 planar in blocks of 256 pixels.
-    * .. _V4L2-PIX-FMT-YYUV:
-
-      - ``V4L2_PIX_FMT_YYUV``
-      - 'YYUV'
-      - unknown
-    * .. _V4L2-PIX-FMT-Y4:
-
-      - ``V4L2_PIX_FMT_Y4``
-      - 'Y04 '
-      - Old 4-bit greyscale format. Only the most significant 4 bits of
-	each byte are used, the other bits are set to 0.
-    * .. _V4L2-PIX-FMT-Y6:
-
-      - ``V4L2_PIX_FMT_Y6``
-      - 'Y06 '
-      - Old 6-bit greyscale format. Only the most significant 6 bits of
-	each byte are used, the other bits are set to 0.
-    * .. _V4L2-PIX-FMT-S5C-UYVY-JPG:
-
-      - ``V4L2_PIX_FMT_S5C_UYVY_JPG``
-      - 'S5CI'
-      - Two-planar format used by Samsung S5C73MX cameras. The first plane
-	contains interleaved JPEG and UYVY image data, followed by meta
-	data in form of an array of offsets to the UYVY data blocks. The
-	actual pointer array follows immediately the interleaved JPEG/UYVY
-	data, the number of entries in this array equals the height of the
-	UYVY image. Each entry is a 4-byte unsigned integer in big endian
-	order and it's an offset to a single pixel line of the UYVY image.
-	The first plane can start either with JPEG or UYVY data chunk. The
-	size of a single UYVY block equals the UYVY image's width
-	multiplied by 2. The size of a JPEG chunk depends on the image and
-	can vary with each line.
-
-	The second plane, at an offset of 4084 bytes, contains a 4-byte
-	offset to the pointer array in the first plane. This offset is
-	followed by a 4-byte value indicating size of the pointer array.
-	All numbers in the second plane are also in big endian order.
-	Remaining data in the second plane is undefined. The information
-	in the second plane allows to easily find location of the pointer
-	array, which can be different for each frame. The size of the
-	pointer array is constant for given UYVY image height.
-
-	In order to extract UYVY and JPEG frames an application can
-	initially set a data pointer to the start of first plane and then
-	add an offset from the first entry of the pointers table. Such a
-	pointer indicates start of an UYVY image pixel line. Whole UYVY
-	line can be copied to a separate buffer. These steps should be
-	repeated for each line, i.e. the number of entries in the pointer
-	array. Anything what's in between the UYVY lines is JPEG data and
-	should be concatenated to form the JPEG stream.
-    * .. _V4L2-PIX-FMT-MT21C:
-
-      - ``V4L2_PIX_FMT_MT21C``
-      - 'MT21'
-      - Compressed two-planar YVU420 format used by Mediatek MT8173.
-	The compression is lossless.
-	It is an opaque intermediate format and the MDP hardware must be
-	used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``,
-	``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``.
-    * .. _V4L2-PIX-FMT-SUNXI-TILED-NV12:
-
-      - ``V4L2_PIX_FMT_SUNXI_TILED_NV12``
-      - 'ST12'
-      - Two-planar NV12-based format used by the video engine found on Allwinner
-	(codenamed sunxi) platforms, with 32x32 tiles for the luminance plane
-	and 32x64 tiles for the chrominance plane. The data in each tile is
-	stored in linear order, within the tile bounds. Each tile follows the
-	previous one linearly in memory (from left to right, top to bottom).
-
-	The associated buffer dimensions are aligned to match an integer number
-	of tiles, resulting in 32-aligned resolutions for the luminance plane
-	and 16-aligned resolutions for the chrominance plane (with 2x2
-	subsampling).
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _format-flags:
-
-.. flat-table:: Format Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_PIX_FMT_FLAG_PREMUL_ALPHA``
-      - 0x00000001
-      - The color values are premultiplied by the alpha channel value. For
-	example, if a light blue pixel with 50% transparency was described
-	by RGBA values (128, 192, 255, 128), the same pixel described with
-	premultiplied colors would be described by RGBA values (64, 96,
-	128, 128)
diff --git a/Documentation/media/uapi/v4l/pixfmt-rgb.rst b/Documentation/media/uapi/v4l/pixfmt-rgb.rst
deleted file mode 100644
index 4ce305cc45da..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-rgb.rst
+++ /dev/null
@@ -1,1304 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _pixfmt-rgb:
-
-***********
-RGB Formats
-***********
-
-Description
-===========
-
-These formats are designed to match the pixel formats of typical PC
-graphics frame buffers. They occupy 8, 16, 24 or 32 bits per pixel.
-These are all packed-pixel formats, meaning all the data for a pixel lie
-next to each other in memory.
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{2.8cm}|p{2.0cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-
-.. flat-table:: RGB Image Formats
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Identifier
-      - Code
-      - :cspan:`7` Byte 0 in memory
-      - :cspan:`7` Byte 1
-      - :cspan:`7` Byte 2
-      - :cspan:`7` Byte 3
-    * -
-      -
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _V4L2-PIX-FMT-RGB332:
-
-      - ``V4L2_PIX_FMT_RGB332``
-      - 'RGB1'
-
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-ARGB444:
-
-      - ``V4L2_PIX_FMT_ARGB444``
-      - 'AR12'
-
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-XRGB444:
-
-      - ``V4L2_PIX_FMT_XRGB444``
-      - 'XR12'
-
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      -
-      -
-      -
-      -
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-RGBA444:
-
-      - ``V4L2_PIX_FMT_RGBA444``
-      - 'RA12'
-
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-RGBX444:
-
-      - ``V4L2_PIX_FMT_RGBX444``
-      - 'RX12'
-
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-      -
-      -
-      -
-
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-ABGR444:
-
-      - ``V4L2_PIX_FMT_ABGR444``
-      - 'AB12'
-
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-XBGR444:
-
-      - ``V4L2_PIX_FMT_XBGR444``
-      - 'XB12'
-
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      -
-      -
-      -
-      -
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-BGRA444:
-
-      - ``V4L2_PIX_FMT_BGRA444``
-      - 'BA12'
-
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-BGRX444:
-
-      - ``V4L2_PIX_FMT_BGRX444``
-      - 'BX12'
-
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      -
-      -
-      -
-      -
-
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-ARGB555:
-
-      - ``V4L2_PIX_FMT_ARGB555``
-      - 'AR15'
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - a
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      -
-    * .. _V4L2-PIX-FMT-XRGB555:
-
-      - ``V4L2_PIX_FMT_XRGB555``
-      - 'XR15'
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      -
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      -
-    * .. _V4L2-PIX-FMT-RGBA555:
-
-      - ``V4L2_PIX_FMT_RGBA555``
-      - 'RA15'
-
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - a
-
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      -
-    * .. _V4L2-PIX-FMT-RGBX555:
-
-      - ``V4L2_PIX_FMT_RGBX555``
-      - 'RX15'
-
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      -
-    * .. _V4L2-PIX-FMT-ABGR555:
-
-      - ``V4L2_PIX_FMT_ABGR555``
-      - 'AB15'
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - a
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      -
-    * .. _V4L2-PIX-FMT-XBGR555:
-
-      - ``V4L2_PIX_FMT_XBGR555``
-      - 'XB15'
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      -
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      -
-    * .. _V4L2-PIX-FMT-BGRA555:
-
-      - ``V4L2_PIX_FMT_BGRA555``
-      - 'BA15'
-
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - a
-
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      -
-    * .. _V4L2-PIX-FMT-BGRX555:
-
-      - ``V4L2_PIX_FMT_BGRX555``
-      - 'BX15'
-
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      -
-
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      -
-    * .. _V4L2-PIX-FMT-RGB565:
-
-      - ``V4L2_PIX_FMT_RGB565``
-      - 'RGBP'
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      -
-    * .. _V4L2-PIX-FMT-ARGB555X:
-
-      - ``V4L2_PIX_FMT_ARGB555X``
-      - 'AR15' | (1 << 31)
-
-      - a
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-XRGB555X:
-
-      - ``V4L2_PIX_FMT_XRGB555X``
-      - 'XR15' | (1 << 31)
-
-      -
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-RGB565X:
-
-      - ``V4L2_PIX_FMT_RGB565X``
-      - 'RGBR'
-
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-BGR24:
-
-      - ``V4L2_PIX_FMT_BGR24``
-      - 'BGR3'
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-RGB24:
-
-      - ``V4L2_PIX_FMT_RGB24``
-      - 'RGB3'
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-BGR666:
-
-      - ``V4L2_PIX_FMT_BGR666``
-      - 'BGRH'
-
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      -
-      -
-      -
-      -
-      -
-      -
-
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-    * .. _V4L2-PIX-FMT-ABGR32:
-
-      - ``V4L2_PIX_FMT_ABGR32``
-      - 'AR24'
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-    * .. _V4L2-PIX-FMT-XBGR32:
-
-      - ``V4L2_PIX_FMT_XBGR32``
-      - 'XR24'
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-    * .. _V4L2-PIX-FMT-BGRA32:
-
-      - ``V4L2_PIX_FMT_BGRA32``
-      - 'RA24'
-
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _V4L2-PIX-FMT-BGRX32:
-
-      - ``V4L2_PIX_FMT_BGRX32``
-      - 'RX24'
-
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _V4L2-PIX-FMT-RGBA32:
-
-      - ``V4L2_PIX_FMT_RGBA32``
-      - 'AB24'
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-    * .. _V4L2-PIX-FMT-RGBX32:
-
-      - ``V4L2_PIX_FMT_RGBX32``
-      - 'XB24'
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-    * .. _V4L2-PIX-FMT-ARGB32:
-
-      - ``V4L2_PIX_FMT_ARGB32``
-      - 'BA24'
-
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _V4L2-PIX-FMT-XRGB32:
-
-      - ``V4L2_PIX_FMT_XRGB32``
-      - 'BX24'
-
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-.. raw:: latex
-
-    \endgroup
-
-.. note:: Bit 7 is the most significant bit.
-
-The usage and value of the alpha bits (a) in the ARGB and ABGR formats
-(collectively referred to as alpha formats) depend on the device type
-and hardware operation. :ref:`Capture <capture>` devices (including
-capture queues of mem-to-mem devices) fill the alpha component in
-memory. When the device outputs an alpha channel the alpha component
-will have a meaningful value. Otherwise, when the device doesn't output
-an alpha channel but can set the alpha bit to a user-configurable value,
-the :ref:`V4L2_CID_ALPHA_COMPONENT <v4l2-alpha-component>` control
-is used to specify that alpha value, and the alpha component of all
-pixels will be set to the value specified by that control. Otherwise a
-corresponding format without an alpha component (XRGB or XBGR) must be
-used instead of an alpha format.
-
-:ref:`Output <output>` devices (including output queues of mem-to-mem
-devices and :ref:`video output overlay <osd>` devices) read the alpha
-component from memory. When the device processes the alpha channel the
-alpha component must be filled with meaningful values by applications.
-Otherwise a corresponding format without an alpha component (XRGB or
-XBGR) must be used instead of an alpha format.
-
-The XRGB and XBGR formats contain undefined bits (-). Applications,
-devices and drivers must ignore those bits, for both
-:ref:`capture` and :ref:`output` devices.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{3.1cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|
-
-.. flat-table:: RGB byte order
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       11 3 3 3 3 3 3 3 3 3 3 3 3
-
-    * - start + 0:
-      - B\ :sub:`00`
-      - G\ :sub:`00`
-      - R\ :sub:`00`
-      - B\ :sub:`01`
-      - G\ :sub:`01`
-      - R\ :sub:`01`
-      - B\ :sub:`02`
-      - G\ :sub:`02`
-      - R\ :sub:`02`
-      - B\ :sub:`03`
-      - G\ :sub:`03`
-      - R\ :sub:`03`
-    * - start + 12:
-      - B\ :sub:`10`
-      - G\ :sub:`10`
-      - R\ :sub:`10`
-      - B\ :sub:`11`
-      - G\ :sub:`11`
-      - R\ :sub:`11`
-      - B\ :sub:`12`
-      - G\ :sub:`12`
-      - R\ :sub:`12`
-      - B\ :sub:`13`
-      - G\ :sub:`13`
-      - R\ :sub:`13`
-    * - start + 24:
-      - B\ :sub:`20`
-      - G\ :sub:`20`
-      - R\ :sub:`20`
-      - B\ :sub:`21`
-      - G\ :sub:`21`
-      - R\ :sub:`21`
-      - B\ :sub:`22`
-      - G\ :sub:`22`
-      - R\ :sub:`22`
-      - B\ :sub:`23`
-      - G\ :sub:`23`
-      - R\ :sub:`23`
-    * - start + 36:
-      - B\ :sub:`30`
-      - G\ :sub:`30`
-      - R\ :sub:`30`
-      - B\ :sub:`31`
-      - G\ :sub:`31`
-      - R\ :sub:`31`
-      - B\ :sub:`32`
-      - G\ :sub:`32`
-      - R\ :sub:`32`
-      - B\ :sub:`33`
-      - G\ :sub:`33`
-      - R\ :sub:`33`
-
-.. raw:: latex
-
-    \normalsize
-
-Formats defined in :ref:`pixfmt-rgb-deprecated` are deprecated and
-must not be used by new drivers. They are documented here for reference.
-The meaning of their alpha bits ``(a)`` are ill-defined and interpreted as in
-either the corresponding ARGB or XRGB format, depending on the driver.
-
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{2.6cm}|p{0.70cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _pixfmt-rgb-deprecated:
-
-.. flat-table:: Deprecated Packed RGB Image Formats
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Identifier
-      - Code
-      - :cspan:`7` Byte 0 in memory
-
-      - :cspan:`7` Byte 1
-
-      - :cspan:`7` Byte 2
-
-      - :cspan:`7` Byte 3
-    * -
-      -
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _V4L2-PIX-FMT-RGB444:
-
-      - ``V4L2_PIX_FMT_RGB444``
-      - 'R444'
-
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-RGB555:
-
-      - ``V4L2_PIX_FMT_RGB555``
-      - 'RGBO'
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - a
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      -
-    * .. _V4L2-PIX-FMT-RGB555X:
-
-      - ``V4L2_PIX_FMT_RGB555X``
-      - 'RGBQ'
-
-      - a
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      -
-    * .. _V4L2-PIX-FMT-BGR32:
-
-      - ``V4L2_PIX_FMT_BGR32``
-      - 'BGR4'
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-    * .. _V4L2-PIX-FMT-RGB32:
-
-      - ``V4L2_PIX_FMT_RGB32``
-      - 'RGB4'
-
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-.. raw:: latex
-
-    \endgroup
-
-A test utility to determine which RGB formats a driver actually supports
-is available from the LinuxTV v4l-dvb repository. See
-`https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
-instructions.
diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst
deleted file mode 100644
index e7a89fe7e117..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-sdr-fmt-cs8:
-
-*************************
-V4L2_SDR_FMT_CS8 ('CS08')
-*************************
-
-Complex signed 8-bit IQ sample
-
-
-Description
-===========
-
-This format contains sequence of complex number samples. Each complex
-number consist two parts, called In-phase and Quadrature (IQ). Both I
-and Q are represented as a 8 bit signed number. I value comes first and
-Q value after that.
-
-**Byte Order.**
-Each cell is one byte.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - I'\ :sub:`0`
-    * - start + 1:
-      - Q'\ :sub:`0`
diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst
deleted file mode 100644
index d10d56f0e63a..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst
+++ /dev/null
@@ -1,41 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-SDR-FMT-CS14LE:
-
-****************************
-V4L2_SDR_FMT_CS14LE ('CS14')
-****************************
-
-Complex signed 14-bit little endian IQ sample
-
-
-Description
-===========
-
-This format contains sequence of complex number samples. Each complex
-number consist two parts, called In-phase and Quadrature (IQ). Both I
-and Q are represented as a 14 bit signed little endian number. I value
-comes first and Q value after that. 14 bit value is stored in 16 bit
-space with unused high bits padded with 0.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - I'\ :sub:`0[7:0]`
-      - I'\ :sub:`0[13:8]`
-    * - start + 2:
-      - Q'\ :sub:`0[7:0]`
-      - Q'\ :sub:`0[13:8]`
diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst
deleted file mode 100644
index f37df90f5a21..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-sdr-fmt-cu8:
-
-*************************
-V4L2_SDR_FMT_CU8 ('CU08')
-*************************
-
-Complex unsigned 8-bit IQ sample
-
-
-Description
-===========
-
-This format contains sequence of complex number samples. Each complex
-number consist two parts, called In-phase and Quadrature (IQ). Both I
-and Q are represented as a 8 bit unsigned number. I value comes first
-and Q value after that.
-
-**Byte Order.**
-Each cell is one byte.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - I'\ :sub:`0`
-    * - start + 1:
-      - Q'\ :sub:`0`
diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst
deleted file mode 100644
index 237998fb5f9f..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst
+++ /dev/null
@@ -1,41 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-SDR-FMT-CU16LE:
-
-****************************
-V4L2_SDR_FMT_CU16LE ('CU16')
-****************************
-
-
-Complex unsigned 16-bit little endian IQ sample
-
-
-Description
-===========
-
-This format contains sequence of complex number samples. Each complex
-number consist two parts, called In-phase and Quadrature (IQ). Both I
-and Q are represented as a 16 bit unsigned little endian number. I value
-comes first and Q value after that.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - I'\ :sub:`0[7:0]`
-      - I'\ :sub:`0[15:8]`
-    * - start + 2:
-      - Q'\ :sub:`0[7:0]`
-      - Q'\ :sub:`0[15:8]`
diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst
deleted file mode 100644
index df078dcfd18d..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-SDR-FMT-PCU16BE:
-
-******************************
-V4L2_SDR_FMT_PCU16BE ('PC16')
-******************************
-
-Planar complex unsigned 16-bit big endian IQ sample
-
-Description
-===========
-
-This format contains a sequence of complex number samples. Each complex
-number consist of two parts called In-phase and Quadrature (IQ). Both I
-and Q are represented as a 16 bit unsigned big endian number stored in
-32 bit space. The remaining unused bits within the 32 bit space will be
-padded with 0. I value starts first and Q value starts at an offset
-equalling half of the buffer size (i.e.) offset = buffersize/2. Out of
-the 16 bits, bit 15:2 (14 bit) is data and bit 1:0 (2 bit) can be any
-value.
-
-**Byte Order.**
-Each cell is one byte.
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * -  Offset:
-      -  Byte B0
-      -  Byte B1
-      -  Byte B2
-      -  Byte B3
-    * -  start + 0:
-      -  I'\ :sub:`0[13:6]`
-      -  I'\ :sub:`0[5:0]; B1[1:0]=pad`
-      -  pad
-      -  pad
-    * -  start + 4:
-      -  I'\ :sub:`1[13:6]`
-      -  I'\ :sub:`1[5:0]; B1[1:0]=pad`
-      -  pad
-      -  pad
-    * -  ...
-    * - start + offset:
-      -  Q'\ :sub:`0[13:6]`
-      -  Q'\ :sub:`0[5:0]; B1[1:0]=pad`
-      -  pad
-      -  pad
-    * - start + offset + 4:
-      -  Q'\ :sub:`1[13:6]`
-      -  Q'\ :sub:`1[5:0]; B1[1:0]=pad`
-      -  pad
-      -  pad
diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst
deleted file mode 100644
index a1ea63db9230..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-SDR-FMT-PCU18BE:
-
-******************************
-V4L2_SDR_FMT_PCU18BE ('PC18')
-******************************
-
-Planar complex unsigned 18-bit big endian IQ sample
-
-Description
-===========
-
-This format contains a sequence of complex number samples. Each complex
-number consist of two parts called In-phase and Quadrature (IQ). Both I
-and Q are represented as a 18 bit unsigned big endian number stored in
-32 bit space. The remaining unused bits within the 32 bit space will be
-padded with 0. I value starts first and Q value starts at an offset
-equalling half of the buffer size (i.e.) offset = buffersize/2. Out of
-the 18 bits, bit 17:2 (16 bit) is data and bit 1:0 (2 bit) can be any
-value.
-
-**Byte Order.**
-Each cell is one byte.
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * -  Offset:
-      -  Byte B0
-      -  Byte B1
-      -  Byte B2
-      -  Byte B3
-    * -  start + 0:
-      -  I'\ :sub:`0[17:10]`
-      -  I'\ :sub:`0[9:2]`
-      -  I'\ :sub:`0[1:0]; B2[5:0]=pad`
-      -  pad
-    * -  start + 4:
-      -  I'\ :sub:`1[17:10]`
-      -  I'\ :sub:`1[9:2]`
-      -  I'\ :sub:`1[1:0]; B2[5:0]=pad`
-      -  pad
-    * -  ...
-    * - start + offset:
-      -  Q'\ :sub:`0[17:10]`
-      -  Q'\ :sub:`0[9:2]`
-      -  Q'\ :sub:`0[1:0]; B2[5:0]=pad`
-      -  pad
-    * - start + offset + 4:
-      -  Q'\ :sub:`1[17:10]`
-      -  Q'\ :sub:`1[9:2]`
-      -  Q'\ :sub:`1[1:0]; B2[5:0]=pad`
-      -  pad
diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst
deleted file mode 100644
index 11a05ea60e26..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-SDR-FMT-PCU20BE:
-
-******************************
-V4L2_SDR_FMT_PCU20BE ('PC20')
-******************************
-
-Planar complex unsigned 20-bit big endian IQ sample
-
-Description
-===========
-
-This format contains a sequence of complex number samples. Each complex
-number consist of two parts called In-phase and Quadrature (IQ). Both I
-and Q are represented as a 20 bit unsigned big endian number stored in
-32 bit space. The remaining unused bits within the 32 bit space will be
-padded with 0. I value starts first and Q value starts at an offset
-equalling half of the buffer size (i.e.) offset = buffersize/2. Out of
-the 20 bits, bit 19:2 (18 bit) is data and bit 1:0 (2 bit) can be any
-value.
-
-**Byte Order.**
-Each cell is one byte.
-
-.. flat-table::
-    :header-rows:  1
-    :stub-columns: 0
-
-    * -  Offset:
-      -  Byte B0
-      -  Byte B1
-      -  Byte B2
-      -  Byte B3
-    * -  start + 0:
-      -  I'\ :sub:`0[19:12]`
-      -  I'\ :sub:`0[11:4]`
-      -  I'\ :sub:`0[3:0]; B2[3:0]=pad`
-      -  pad
-    * -  start + 4:
-      -  I'\ :sub:`1[19:12]`
-      -  I'\ :sub:`1[11:4]`
-      -  I'\ :sub:`1[3:0]; B2[3:0]=pad`
-      -  pad
-    * -  ...
-    * - start + offset:
-      -  Q'\ :sub:`0[19:12]`
-      -  Q'\ :sub:`0[11:4]`
-      -  Q'\ :sub:`0[3:0]; B2[3:0]=pad`
-      -  pad
-    * - start + offset + 4:
-      -  Q'\ :sub:`1[19:12]`
-      -  Q'\ :sub:`1[11:4]`
-      -  Q'\ :sub:`1[3:0]; B2[3:0]=pad`
-      -  pad
diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst
deleted file mode 100644
index 3c2c9f75fc5e..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-SDR-FMT-RU12LE:
-
-****************************
-V4L2_SDR_FMT_RU12LE ('RU12')
-****************************
-
-
-Real unsigned 12-bit little endian sample
-
-
-Description
-===========
-
-This format contains sequence of real number samples. Each sample is
-represented as a 12 bit unsigned little endian number. Sample is stored
-in 16 bit space with unused high bits padded with 0.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - I'\ :sub:`0[7:0]`
-      - I'\ :sub:`0[11:8]`
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst
deleted file mode 100644
index 75279f0fdad8..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst
+++ /dev/null
@@ -1,342 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-pix-fmt-ipu3-sbggr10:
-.. _v4l2-pix-fmt-ipu3-sgbrg10:
-.. _v4l2-pix-fmt-ipu3-sgrbg10:
-.. _v4l2-pix-fmt-ipu3-srggb10:
-
-**********************************************************************************************************************************************
-V4L2_PIX_FMT_IPU3_SBGGR10 ('ip3b'), V4L2_PIX_FMT_IPU3_SGBRG10 ('ip3g'), V4L2_PIX_FMT_IPU3_SGRBG10 ('ip3G'), V4L2_PIX_FMT_IPU3_SRGGB10 ('ip3r')
-**********************************************************************************************************************************************
-
-10-bit Bayer formats
-
-Description
-===========
-
-These four pixel formats are used by Intel IPU3 driver, they are raw
-sRGB / Bayer formats with 10 bits per sample with every 25 pixels packed
-to 32 bytes leaving 6 most significant bits padding in the last byte.
-The format is little endian.
-
-In other respects this format is similar to :ref:`V4L2-PIX-FMT-SRGGB10`.
-Below is an example of a small image in V4L2_PIX_FMT_IPU3_SBGGR10 format.
-
-**Byte Order.**
-Each cell is one byte.
-
-.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|
-
-.. flat-table::
-
-    * - start + 0:
-      - B\ :sub:`0000low`
-      - G\ :sub:`0001low`\ (bits 7--2)
-
-        B\ :sub:`0000high`\ (bits 1--0)
-      - B\ :sub:`0002low`\ (bits 7--4)
-
-        G\ :sub:`0001high`\ (bits 3--0)
-      - G\ :sub:`0003low`\ (bits 7--6)
-
-        B\ :sub:`0002high`\ (bits 5--0)
-    * - start + 4:
-      - G\ :sub:`0003high`
-      - B\ :sub:`0004low`
-      - G\ :sub:`0005low`\ (bits 7--2)
-
-        B\ :sub:`0004high`\ (bits 1--0)
-      - B\ :sub:`0006low`\ (bits 7--4)
-
-        G\ :sub:`0005high`\ (bits 3--0)
-    * - start + 8:
-      - G\ :sub:`0007low`\ (bits 7--6)
-
-        B\ :sub:`0006high`\ (bits 5--0)
-      - G\ :sub:`0007high`
-      - B\ :sub:`0008low`
-      - G\ :sub:`0009low`\ (bits 7--2)
-
-        B\ :sub:`0008high`\ (bits 1--0)
-    * - start + 12:
-      - B\ :sub:`0010low`\ (bits 7--4)
-
-        G\ :sub:`0009high`\ (bits 3--0)
-      - G\ :sub:`0011low`\ (bits 7--6)
-
-        B\ :sub:`0010high`\ (bits 5--0)
-      - G\ :sub:`0011high`
-      - B\ :sub:`0012low`
-    * - start + 16:
-      - G\ :sub:`0013low`\ (bits 7--2)
-
-        B\ :sub:`0012high`\ (bits 1--0)
-      - B\ :sub:`0014low`\ (bits 7--4)
-
-        G\ :sub:`0013high`\ (bits 3--0)
-      - G\ :sub:`0015low`\ (bits 7--6)
-
-        B\ :sub:`0014high`\ (bits 5--0)
-      - G\ :sub:`0015high`
-    * - start + 20
-      - B\ :sub:`0016low`
-      - G\ :sub:`0017low`\ (bits 7--2)
-
-        B\ :sub:`0016high`\ (bits 1--0)
-      - B\ :sub:`0018low`\ (bits 7--4)
-
-        G\ :sub:`0017high`\ (bits 3--0)
-      - G\ :sub:`0019low`\ (bits 7--6)
-
-        B\ :sub:`0018high`\ (bits 5--0)
-    * - start + 24:
-      - G\ :sub:`0019high`
-      - B\ :sub:`0020low`
-      - G\ :sub:`0021low`\ (bits 7--2)
-
-        B\ :sub:`0020high`\ (bits 1--0)
-      - B\ :sub:`0022low`\ (bits 7--4)
-
-        G\ :sub:`0021high`\ (bits 3--0)
-    * - start + 28:
-      - G\ :sub:`0023low`\ (bits 7--6)
-
-        B\ :sub:`0022high`\ (bits 5--0)
-      - G\ :sub:`0023high`
-      - B\ :sub:`0024low`
-      - B\ :sub:`0024high`\ (bits 1--0)
-    * - start + 32:
-      - G\ :sub:`0100low`
-      - R\ :sub:`0101low`\ (bits 7--2)
-
-        G\ :sub:`0100high`\ (bits 1--0)
-      - G\ :sub:`0102low`\ (bits 7--4)
-
-        R\ :sub:`0101high`\ (bits 3--0)
-      - R\ :sub:`0103low`\ (bits 7--6)
-
-        G\ :sub:`0102high`\ (bits 5--0)
-    * - start + 36:
-      - R\ :sub:`0103high`
-      - G\ :sub:`0104low`
-      - R\ :sub:`0105low`\ (bits 7--2)
-
-        G\ :sub:`0104high`\ (bits 1--0)
-      - G\ :sub:`0106low`\ (bits 7--4)
-
-        R\ :sub:`0105high`\ (bits 3--0)
-    * - start + 40:
-      - R\ :sub:`0107low`\ (bits 7--6)
-
-        G\ :sub:`0106high`\ (bits 5--0)
-      - R\ :sub:`0107high`
-      - G\ :sub:`0108low`
-      - R\ :sub:`0109low`\ (bits 7--2)
-
-        G\ :sub:`0108high`\ (bits 1--0)
-    * - start + 44:
-      - G\ :sub:`0110low`\ (bits 7--4)
-
-        R\ :sub:`0109high`\ (bits 3--0)
-      - R\ :sub:`0111low`\ (bits 7--6)
-
-        G\ :sub:`0110high`\ (bits 5--0)
-      - R\ :sub:`0111high`
-      - G\ :sub:`0112low`
-    * - start + 48:
-      - R\ :sub:`0113low`\ (bits 7--2)
-
-        G\ :sub:`0112high`\ (bits 1--0)
-      - G\ :sub:`0114low`\ (bits 7--4)
-
-        R\ :sub:`0113high`\ (bits 3--0)
-      - R\ :sub:`0115low`\ (bits 7--6)
-
-        G\ :sub:`0114high`\ (bits 5--0)
-      - R\ :sub:`0115high`
-    * - start + 52:
-      - G\ :sub:`0116low`
-      - R\ :sub:`0117low`\ (bits 7--2)
-
-        G\ :sub:`0116high`\ (bits 1--0)
-      - G\ :sub:`0118low`\ (bits 7--4)
-
-        R\ :sub:`0117high`\ (bits 3--0)
-      - R\ :sub:`0119low`\ (bits 7--6)
-
-        G\ :sub:`0118high`\ (bits 5--0)
-    * - start + 56:
-      - R\ :sub:`0119high`
-      - G\ :sub:`0120low`
-      - R\ :sub:`0121low`\ (bits 7--2)
-
-        G\ :sub:`0120high`\ (bits 1--0)
-      - G\ :sub:`0122low`\ (bits 7--4)
-
-        R\ :sub:`0121high`\ (bits 3--0)
-    * - start + 60:
-      - R\ :sub:`0123low`\ (bits 7--6)
-
-        G\ :sub:`0122high`\ (bits 5--0)
-      - R\ :sub:`0123high`
-      - G\ :sub:`0124low`
-      - G\ :sub:`0124high`\ (bits 1--0)
-    * - start + 64:
-      - B\ :sub:`0200low`
-      - G\ :sub:`0201low`\ (bits 7--2)
-
-        B\ :sub:`0200high`\ (bits 1--0)
-      - B\ :sub:`0202low`\ (bits 7--4)
-
-        G\ :sub:`0201high`\ (bits 3--0)
-      - G\ :sub:`0203low`\ (bits 7--6)
-
-        B\ :sub:`0202high`\ (bits 5--0)
-    * - start + 68:
-      - G\ :sub:`0203high`
-      - B\ :sub:`0204low`
-      - G\ :sub:`0205low`\ (bits 7--2)
-
-        B\ :sub:`0204high`\ (bits 1--0)
-      - B\ :sub:`0206low`\ (bits 7--4)
-
-        G\ :sub:`0205high`\ (bits 3--0)
-    * - start + 72:
-      - G\ :sub:`0207low`\ (bits 7--6)
-
-        B\ :sub:`0206high`\ (bits 5--0)
-      - G\ :sub:`0207high`
-      - B\ :sub:`0208low`
-      - G\ :sub:`0209low`\ (bits 7--2)
-
-        B\ :sub:`0208high`\ (bits 1--0)
-    * - start + 76:
-      - B\ :sub:`0210low`\ (bits 7--4)
-
-        G\ :sub:`0209high`\ (bits 3--0)
-      - G\ :sub:`0211low`\ (bits 7--6)
-
-        B\ :sub:`0210high`\ (bits 5--0)
-      - G\ :sub:`0211high`
-      - B\ :sub:`0212low`
-    * - start + 80:
-      - G\ :sub:`0213low`\ (bits 7--2)
-
-        B\ :sub:`0212high`\ (bits 1--0)
-      - B\ :sub:`0214low`\ (bits 7--4)
-
-        G\ :sub:`0213high`\ (bits 3--0)
-      - G\ :sub:`0215low`\ (bits 7--6)
-
-        B\ :sub:`0214high`\ (bits 5--0)
-      - G\ :sub:`0215high`
-    * - start + 84:
-      - B\ :sub:`0216low`
-      - G\ :sub:`0217low`\ (bits 7--2)
-
-        B\ :sub:`0216high`\ (bits 1--0)
-      - B\ :sub:`0218low`\ (bits 7--4)
-
-        G\ :sub:`0217high`\ (bits 3--0)
-      - G\ :sub:`0219low`\ (bits 7--6)
-
-        B\ :sub:`0218high`\ (bits 5--0)
-    * - start + 88:
-      - G\ :sub:`0219high`
-      - B\ :sub:`0220low`
-      - G\ :sub:`0221low`\ (bits 7--2)
-
-        B\ :sub:`0220high`\ (bits 1--0)
-      - B\ :sub:`0222low`\ (bits 7--4)
-
-        G\ :sub:`0221high`\ (bits 3--0)
-    * - start + 92:
-      - G\ :sub:`0223low`\ (bits 7--6)
-
-        B\ :sub:`0222high`\ (bits 5--0)
-      - G\ :sub:`0223high`
-      - B\ :sub:`0224low`
-      - B\ :sub:`0224high`\ (bits 1--0)
-    * - start + 96:
-      - G\ :sub:`0300low`
-      - R\ :sub:`0301low`\ (bits 7--2)
-
-        G\ :sub:`0300high`\ (bits 1--0)
-      - G\ :sub:`0302low`\ (bits 7--4)
-
-        R\ :sub:`0301high`\ (bits 3--0)
-      - R\ :sub:`0303low`\ (bits 7--6)
-
-        G\ :sub:`0302high`\ (bits 5--0)
-    * - start + 100:
-      - R\ :sub:`0303high`
-      - G\ :sub:`0304low`
-      - R\ :sub:`0305low`\ (bits 7--2)
-
-        G\ :sub:`0304high`\ (bits 1--0)
-      - G\ :sub:`0306low`\ (bits 7--4)
-
-        R\ :sub:`0305high`\ (bits 3--0)
-    * - start + 104:
-      - R\ :sub:`0307low`\ (bits 7--6)
-
-        G\ :sub:`0306high`\ (bits 5--0)
-      - R\ :sub:`0307high`
-      - G\ :sub:`0308low`
-      - R\ :sub:`0309low`\ (bits 7--2)
-
-        G\ :sub:`0308high`\ (bits 1--0)
-    * - start + 108:
-      - G\ :sub:`0310low`\ (bits 7--4)
-
-        R\ :sub:`0309high`\ (bits 3--0)
-      - R\ :sub:`0311low`\ (bits 7--6)
-
-        G\ :sub:`0310high`\ (bits 5--0)
-      - R\ :sub:`0311high`
-      - G\ :sub:`0312low`
-    * - start + 112:
-      - R\ :sub:`0313low`\ (bits 7--2)
-
-        G\ :sub:`0312high`\ (bits 1--0)
-      - G\ :sub:`0314low`\ (bits 7--4)
-
-        R\ :sub:`0313high`\ (bits 3--0)
-      - R\ :sub:`0315low`\ (bits 7--6)
-
-        G\ :sub:`0314high`\ (bits 5--0)
-      - R\ :sub:`0315high`
-    * - start + 116:
-      - G\ :sub:`0316low`
-      - R\ :sub:`0317low`\ (bits 7--2)
-
-        G\ :sub:`0316high`\ (bits 1--0)
-      - G\ :sub:`0318low`\ (bits 7--4)
-
-        R\ :sub:`0317high`\ (bits 3--0)
-      - R\ :sub:`0319low`\ (bits 7--6)
-
-        G\ :sub:`0318high`\ (bits 5--0)
-    * - start + 120:
-      - R\ :sub:`0319high`
-      - G\ :sub:`0320low`
-      - R\ :sub:`0321low`\ (bits 7--2)
-
-        G\ :sub:`0320high`\ (bits 1--0)
-      - G\ :sub:`0322low`\ (bits 7--4)
-
-        R\ :sub:`0321high`\ (bits 3--0)
-    * - start + 124:
-      - R\ :sub:`0323low`\ (bits 7--6)
-
-        G\ :sub:`0322high`\ (bits 5--0)
-      - R\ :sub:`0323high`
-      - G\ :sub:`0324low`
-      - G\ :sub:`0324high`\ (bits 1--0)
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10.rst
deleted file mode 100644
index cab7fbb1f2fe..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb10.rst
+++ /dev/null
@@ -1,83 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SRGGB10:
-.. _v4l2-pix-fmt-sbggr10:
-.. _v4l2-pix-fmt-sgbrg10:
-.. _v4l2-pix-fmt-sgrbg10:
-
-***************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB10 ('RG10'), V4L2_PIX_FMT_SGRBG10 ('BA10'), V4L2_PIX_FMT_SGBRG10 ('GB10'), V4L2_PIX_FMT_SBGGR10 ('BG10'),
-***************************************************************************************************************************
-
-
-V4L2_PIX_FMT_SGRBG10
-V4L2_PIX_FMT_SGBRG10
-V4L2_PIX_FMT_SBGGR10
-10-bit Bayer formats expanded to 16 bits
-
-
-Description
-===========
-
-These four pixel formats are raw sRGB / Bayer formats with 10 bits per
-sample. Each sample is stored in a 16-bit word, with 6 unused
-high bits filled with zeros. Each n-pixel row contains n/2 green samples and
-n/2 blue or red samples, with alternating red and blue rows. Bytes are
-stored in memory in little endian order. They are conventionally described
-as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example of one of
-these formats:
-
-**Byte Order.**
-Each cell is one byte, the 6 most significant bits in the high bytes
-are 0.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - B\ :sub:`00low`
-      - B\ :sub:`00high`
-      - G\ :sub:`01low`
-      - G\ :sub:`01high`
-      - B\ :sub:`02low`
-      - B\ :sub:`02high`
-      - G\ :sub:`03low`
-      - G\ :sub:`03high`
-    * - start + 8:
-      - G\ :sub:`10low`
-      - G\ :sub:`10high`
-      - R\ :sub:`11low`
-      - R\ :sub:`11high`
-      - G\ :sub:`12low`
-      - G\ :sub:`12high`
-      - R\ :sub:`13low`
-      - R\ :sub:`13high`
-    * - start + 16:
-      - B\ :sub:`20low`
-      - B\ :sub:`20high`
-      - G\ :sub:`21low`
-      - G\ :sub:`21high`
-      - B\ :sub:`22low`
-      - B\ :sub:`22high`
-      - G\ :sub:`23low`
-      - G\ :sub:`23high`
-    * - start + 24:
-      - G\ :sub:`30low`
-      - G\ :sub:`30high`
-      - R\ :sub:`31low`
-      - R\ :sub:`31high`
-      - G\ :sub:`32low`
-      - G\ :sub:`32high`
-      - R\ :sub:`33low`
-      - R\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst
deleted file mode 100644
index 5bb58764b532..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SBGGR10ALAW8:
-.. _v4l2-pix-fmt-sgbrg10alaw8:
-.. _v4l2-pix-fmt-sgrbg10alaw8:
-.. _v4l2-pix-fmt-srggb10alaw8:
-
-***********************************************************************************************************************************************
-V4L2_PIX_FMT_SBGGR10ALAW8 ('aBA8'), V4L2_PIX_FMT_SGBRG10ALAW8 ('aGA8'), V4L2_PIX_FMT_SGRBG10ALAW8 ('agA8'), V4L2_PIX_FMT_SRGGB10ALAW8 ('aRA8'),
-***********************************************************************************************************************************************
-
-V4L2_PIX_FMT_SGBRG10ALAW8
-V4L2_PIX_FMT_SGRBG10ALAW8
-V4L2_PIX_FMT_SRGGB10ALAW8
-10-bit Bayer formats compressed to 8 bits
-
-
-Description
-===========
-
-These four pixel formats are raw sRGB / Bayer formats with 10 bits per
-color compressed to 8 bits each, using the A-LAW algorithm. Each color
-component consumes 8 bits of memory. In other respects this format is
-similar to :ref:`V4L2-PIX-FMT-SRGGB8`.
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst
deleted file mode 100644
index cbc9c0a52ab4..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst
+++ /dev/null
@@ -1,35 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SBGGR10DPCM8:
-.. _v4l2-pix-fmt-sgbrg10dpcm8:
-.. _v4l2-pix-fmt-sgrbg10dpcm8:
-.. _v4l2-pix-fmt-srggb10dpcm8:
-
-
-***********************************************************************************************************************************************
-V4L2_PIX_FMT_SBGGR10DPCM8 ('bBA8'), V4L2_PIX_FMT_SGBRG10DPCM8 ('bGA8'), V4L2_PIX_FMT_SGRBG10DPCM8 ('BD10'), V4L2_PIX_FMT_SRGGB10DPCM8 ('bRA8'),
-***********************************************************************************************************************************************
-
-*man V4L2_PIX_FMT_SBGGR10DPCM8(2)*
-
-V4L2_PIX_FMT_SGBRG10DPCM8
-V4L2_PIX_FMT_SGRBG10DPCM8
-V4L2_PIX_FMT_SRGGB10DPCM8
-10-bit Bayer formats compressed to 8 bits
-
-
-Description
-===========
-
-These four pixel formats are raw sRGB / Bayer formats with 10 bits per
-colour compressed to 8 bits each, using DPCM compression. DPCM,
-differential pulse-code modulation, is lossy. Each colour component
-consumes 8 bits of memory. In other respects this format is similar to
-:ref:`V4L2-PIX-FMT-SRGGB10`.
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst
deleted file mode 100644
index fd32660a3766..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst
+++ /dev/null
@@ -1,81 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SRGGB10P:
-.. _v4l2-pix-fmt-sbggr10p:
-.. _v4l2-pix-fmt-sgbrg10p:
-.. _v4l2-pix-fmt-sgrbg10p:
-
-*******************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB10P ('pRAA'), V4L2_PIX_FMT_SGRBG10P ('pgAA'), V4L2_PIX_FMT_SGBRG10P ('pGAA'), V4L2_PIX_FMT_SBGGR10P ('pBAA'),
-*******************************************************************************************************************************
-
-
-V4L2_PIX_FMT_SGRBG10P
-V4L2_PIX_FMT_SGBRG10P
-V4L2_PIX_FMT_SBGGR10P
-10-bit packed Bayer formats
-
-
-Description
-===========
-
-These four pixel formats are packed raw sRGB / Bayer formats with 10
-bits per sample. Every four consecutive samples are packed into 5
-bytes. Each of the first 4 bytes contain the 8 high order bits
-of the pixels, and the 5th byte contains the 2 least significants
-bits of each pixel, in the same order.
-
-Each n-pixel row contains n/2 green samples and n/2 blue or red samples,
-with alternating green-red and green-blue rows. They are conventionally
-described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example
-of a small V4L2_PIX_FMT_SBGGR10P image:
-
-**Byte Order.**
-Each cell is one byte.
-
-.. tabularcolumns:: |p{2.4cm}|p{1.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{6.4cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 12 8 8 8 8 68
-
-    * - start + 0:
-      - B\ :sub:`00high`
-      - G\ :sub:`01high`
-      - B\ :sub:`02high`
-      - G\ :sub:`03high`
-      - G\ :sub:`03low`\ (bits 7--6) B\ :sub:`02low`\ (bits 5--4)
-
-	G\ :sub:`01low`\ (bits 3--2) B\ :sub:`00low`\ (bits 1--0)
-    * - start + 5:
-      - G\ :sub:`10high`
-      - R\ :sub:`11high`
-      - G\ :sub:`12high`
-      - R\ :sub:`13high`
-      - R\ :sub:`13low`\ (bits 7--6) G\ :sub:`12low`\ (bits 5--4)
-
-	R\ :sub:`11low`\ (bits 3--2) G\ :sub:`10low`\ (bits 1--0)
-    * - start + 10:
-      - B\ :sub:`20high`
-      - G\ :sub:`21high`
-      - B\ :sub:`22high`
-      - G\ :sub:`23high`
-      - G\ :sub:`23low`\ (bits 7--6) B\ :sub:`22low`\ (bits 5--4)
-
-	G\ :sub:`21low`\ (bits 3--2) B\ :sub:`20low`\ (bits 1--0)
-    * - start + 15:
-      - G\ :sub:`30high`
-      - R\ :sub:`31high`
-      - G\ :sub:`32high`
-      - R\ :sub:`33high`
-      - R\ :sub:`33low`\ (bits 7--6) G\ :sub:`32low`\ (bits 5--4)
-
-	R\ :sub:`31low`\ (bits 3--2) G\ :sub:`30low`\ (bits 1--0)
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb12.rst b/Documentation/media/uapi/v4l/pixfmt-srggb12.rst
deleted file mode 100644
index 6fb6a937e6ad..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb12.rst
+++ /dev/null
@@ -1,84 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SRGGB12:
-.. _v4l2-pix-fmt-sbggr12:
-.. _v4l2-pix-fmt-sgbrg12:
-.. _v4l2-pix-fmt-sgrbg12:
-
-
-***************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB12 ('RG12'), V4L2_PIX_FMT_SGRBG12 ('BA12'), V4L2_PIX_FMT_SGBRG12 ('GB12'), V4L2_PIX_FMT_SBGGR12 ('BG12'),
-***************************************************************************************************************************
-
-
-V4L2_PIX_FMT_SGRBG12
-V4L2_PIX_FMT_SGBRG12
-V4L2_PIX_FMT_SBGGR12
-12-bit Bayer formats expanded to 16 bits
-
-
-Description
-===========
-
-These four pixel formats are raw sRGB / Bayer formats with 12 bits per
-colour. Each colour component is stored in a 16-bit word, with 4 unused
-high bits filled with zeros. Each n-pixel row contains n/2 green samples
-and n/2 blue or red samples, with alternating red and blue rows. Bytes
-are stored in memory in little endian order. They are conventionally
-described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example
-of a small V4L2_PIX_FMT_SBGGR12 image:
-
-**Byte Order.**
-Each cell is one byte, the 4 most significant bits in the high bytes are
-0.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - B\ :sub:`00low`
-      - B\ :sub:`00high`
-      - G\ :sub:`01low`
-      - G\ :sub:`01high`
-      - B\ :sub:`02low`
-      - B\ :sub:`02high`
-      - G\ :sub:`03low`
-      - G\ :sub:`03high`
-    * - start + 8:
-      - G\ :sub:`10low`
-      - G\ :sub:`10high`
-      - R\ :sub:`11low`
-      - R\ :sub:`11high`
-      - G\ :sub:`12low`
-      - G\ :sub:`12high`
-      - R\ :sub:`13low`
-      - R\ :sub:`13high`
-    * - start + 16:
-      - B\ :sub:`20low`
-      - B\ :sub:`20high`
-      - G\ :sub:`21low`
-      - G\ :sub:`21high`
-      - B\ :sub:`22low`
-      - B\ :sub:`22high`
-      - G\ :sub:`23low`
-      - G\ :sub:`23high`
-    * - start + 24:
-      - G\ :sub:`30low`
-      - G\ :sub:`30high`
-      - R\ :sub:`31low`
-      - R\ :sub:`31high`
-      - G\ :sub:`32low`
-      - G\ :sub:`32high`
-      - R\ :sub:`33low`
-      - R\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst
deleted file mode 100644
index 045540bc0d86..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst
+++ /dev/null
@@ -1,94 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SRGGB12P:
-.. _v4l2-pix-fmt-sbggr12p:
-.. _v4l2-pix-fmt-sgbrg12p:
-.. _v4l2-pix-fmt-sgrbg12p:
-
-*******************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB12P ('pRCC'), V4L2_PIX_FMT_SGRBG12P ('pgCC'), V4L2_PIX_FMT_SGBRG12P ('pGCC'), V4L2_PIX_FMT_SBGGR12P ('pBCC'),
-*******************************************************************************************************************************
-
-
-12-bit packed Bayer formats
----------------------------
-
-
-Description
-===========
-
-These four pixel formats are packed raw sRGB / Bayer formats with 12
-bits per colour. Every two consecutive samples are packed into three
-bytes. Each of the first two bytes contain the 8 high order bits of
-the pixels, and the third byte contains the four least significants
-bits of each pixel, in the same order.
-
-Each n-pixel row contains n/2 green samples and n/2 blue or red
-samples, with alternating green-red and green-blue rows. They are
-conventionally described as GRGR... BGBG..., RGRG... GBGB..., etc.
-Below is an example of a small V4L2_PIX_FMT_SBGGR12P image:
-
-**Byte Order.**
-Each cell is one byte.
-
-.. tabularcolumns:: |p{2.2cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       2 1 1 1 1 1 1
-
-
-    -  -  start + 0:
-       -  B\ :sub:`00high`
-       -  G\ :sub:`01high`
-       -  G\ :sub:`01low`\ (bits 7--4)
-
-          B\ :sub:`00low`\ (bits 3--0)
-       -  B\ :sub:`02high`
-       -  G\ :sub:`03high`
-       -  G\ :sub:`03low`\ (bits 7--4)
-
-          B\ :sub:`02low`\ (bits 3--0)
-
-    -  -  start + 6:
-       -  G\ :sub:`10high`
-       -  R\ :sub:`11high`
-       -  R\ :sub:`11low`\ (bits 7--4)
-
-          G\ :sub:`10low`\ (bits 3--0)
-       -  G\ :sub:`12high`
-       -  R\ :sub:`13high`
-       -  R\ :sub:`13low`\ (bits 3--2)
-
-          G\ :sub:`12low`\ (bits 3--0)
-    -  -  start + 12:
-       -  B\ :sub:`20high`
-       -  G\ :sub:`21high`
-       -  G\ :sub:`21low`\ (bits 7--4)
-
-          B\ :sub:`20low`\ (bits 3--0)
-       -  B\ :sub:`22high`
-       -  G\ :sub:`23high`
-       -  G\ :sub:`23low`\ (bits 7--4)
-
-          B\ :sub:`22low`\ (bits 3--0)
-    -  -  start + 18:
-       -  G\ :sub:`30high`
-       -  R\ :sub:`31high`
-       -  R\ :sub:`31low`\ (bits 7--4)
-
-          G\ :sub:`30low`\ (bits 3--0)
-       -  G\ :sub:`32high`
-       -  R\ :sub:`33high`
-       -  R\ :sub:`33low`\ (bits 3--2)
-
-          G\ :sub:`32low`\ (bits 3--0)
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb14.rst b/Documentation/media/uapi/v4l/pixfmt-srggb14.rst
deleted file mode 100644
index 3420d4d1825e..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb14.rst
+++ /dev/null
@@ -1,82 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SRGGB14:
-.. _v4l2-pix-fmt-sbggr14:
-.. _v4l2-pix-fmt-sgbrg14:
-.. _v4l2-pix-fmt-sgrbg14:
-
-
-***************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB14 ('RG14'), V4L2_PIX_FMT_SGRBG14 ('GR14'), V4L2_PIX_FMT_SGBRG14 ('GB14'), V4L2_PIX_FMT_SBGGR14 ('BG14'),
-***************************************************************************************************************************
-
-
-14-bit Bayer formats expanded to 16 bits
-
-
-Description
-===========
-
-These four pixel formats are raw sRGB / Bayer formats with 14 bits per
-colour. Each sample is stored in a 16-bit word, with two unused high
-bits filled with zeros. Each n-pixel row contains n/2 green samples
-and n/2 blue or red samples, with alternating red and blue rows. Bytes
-are stored in memory in little endian order. They are conventionally
-described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an
-example of a small V4L2_PIX_FMT_SBGGR14 image:
-
-**Byte Order.**
-Each cell is one byte, the two most significant bits in the high bytes are
-zero.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       2 1 1 1 1 1 1 1 1
-
-
-    * - start + 0:
-      - B\ :sub:`00low`
-      - B\ :sub:`00high`
-      - G\ :sub:`01low`
-      - G\ :sub:`01high`
-      - B\ :sub:`02low`
-      - B\ :sub:`02high`
-      - G\ :sub:`03low`
-      - G\ :sub:`03high`
-    * - start + 8:
-      - G\ :sub:`10low`
-      - G\ :sub:`10high`
-      - R\ :sub:`11low`
-      - R\ :sub:`11high`
-      - G\ :sub:`12low`
-      - G\ :sub:`12high`
-      - R\ :sub:`13low`
-      - R\ :sub:`13high`
-    * - start + 16:
-      - B\ :sub:`20low`
-      - B\ :sub:`20high`
-      - G\ :sub:`21low`
-      - G\ :sub:`21high`
-      - B\ :sub:`22low`
-      - B\ :sub:`22high`
-      - G\ :sub:`23low`
-      - G\ :sub:`23high`
-    * - start + 24:
-      - G\ :sub:`30low`
-      - G\ :sub:`30high`
-      - R\ :sub:`31low`
-      - R\ :sub:`31high`
-      - G\ :sub:`32low`
-      - G\ :sub:`32high`
-      - R\ :sub:`33low`
-      - R\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst
deleted file mode 100644
index 051ae3d05bc3..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst
+++ /dev/null
@@ -1,152 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SRGGB14P:
-.. _v4l2-pix-fmt-sbggr14p:
-.. _v4l2-pix-fmt-sgbrg14p:
-.. _v4l2-pix-fmt-sgrbg14p:
-
-*******************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB14P ('pREE'), V4L2_PIX_FMT_SGRBG14P ('pgEE'), V4L2_PIX_FMT_SGBRG14P ('pGEE'), V4L2_PIX_FMT_SBGGR14P ('pBEE'),
-*******************************************************************************************************************************
-
-*man V4L2_PIX_FMT_SRGGB14P(2)*
-
-V4L2_PIX_FMT_SGRBG14P
-V4L2_PIX_FMT_SGBRG14P
-V4L2_PIX_FMT_SBGGR14P
-14-bit packed Bayer formats
-
-
-Description
-===========
-
-These four pixel formats are packed raw sRGB / Bayer formats with 14
-bits per colour. Every four consecutive samples are packed into seven
-bytes. Each of the first four bytes contain the eight high order bits
-of the pixels, and the three following bytes contains the six least
-significants bits of each pixel, in the same order.
-
-Each n-pixel row contains n/2 green samples and n/2 blue or red samples,
-with alternating green-red and green-blue rows. They are conventionally
-described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example
-of one of these formats:
-
-**Byte Order.**
-Each cell is one byte.
-
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{1.8cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{1.1cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       2 1 1 1 1 3 3 3
-
-
-    -  .. row 1
-
-       -  start + 0
-
-       -  B\ :sub:`00high`
-
-       -  G\ :sub:`01high`
-
-       -  B\ :sub:`02high`
-
-       -  G\ :sub:`03high`
-
-       -  G\ :sub:`01low bits 1--0`\ (bits 7--6)
-
-	  B\ :sub:`00low bits 5--0`\ (bits 5--0)
-
-       -  R\ :sub:`02low bits 3--0`\ (bits 7--4)
-
-	  G\ :sub:`01low bits 5--2`\ (bits 3--0)
-
-       -  G\ :sub:`03low bits 5--0`\ (bits 7--2)
-
-	  R\ :sub:`02low bits 5--4`\ (bits 1--0)
-
-    -  .. row 2
-
-       -  start + 7
-
-       -  G\ :sub:`00high`
-
-       -  R\ :sub:`01high`
-
-       -  G\ :sub:`02high`
-
-       -  R\ :sub:`03high`
-
-       -  R\ :sub:`01low bits 1--0`\ (bits 7--6)
-
-	  G\ :sub:`00low bits 5--0`\ (bits 5--0)
-
-       -  G\ :sub:`02low bits 3--0`\ (bits 7--4)
-
-	  R\ :sub:`01low bits 5--2`\ (bits 3--0)
-
-       -  R\ :sub:`03low bits 5--0`\ (bits 7--2)
-
-	  G\ :sub:`02low bits 5--4`\ (bits 1--0)
-
-    -  .. row 3
-
-       -  start + 14
-
-       -  B\ :sub:`20high`
-
-       -  G\ :sub:`21high`
-
-       -  B\ :sub:`22high`
-
-       -  G\ :sub:`23high`
-
-       -  G\ :sub:`21low bits 1--0`\ (bits 7--6)
-
-	  B\ :sub:`20low bits 5--0`\ (bits 5--0)
-
-       -  R\ :sub:`22low bits 3--0`\ (bits 7--4)
-
-	  G\ :sub:`21low bits 5--2`\ (bits 3--0)
-
-       -  G\ :sub:`23low bits 5--0`\ (bits 7--2)
-
-	  R\ :sub:`22low bits 5--4`\ (bits 1--0)
-
-    -  .. row 4
-
-       -  start + 21
-
-       -  G\ :sub:`30high`
-
-       -  R\ :sub:`31high`
-
-       -  G\ :sub:`32high`
-
-       -  R\ :sub:`33high`
-
-       -  R\ :sub:`31low bits 1--0`\ (bits 7--6)
-	  G\ :sub:`30low bits 5--0`\ (bits 5--0)
-
-       -  G\ :sub:`32low bits 3--0`\ (bits 7--4)
-	  R\ :sub:`31low bits 5--2`\ (bits 3--0)
-
-       -  R\ :sub:`33low bits 5--0`\ (bits 7--2)
-	  G\ :sub:`32low bits 5--4`\ (bits 1--0)
-
-.. raw:: latex
-
-    \normalsize
-
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb16.rst b/Documentation/media/uapi/v4l/pixfmt-srggb16.rst
deleted file mode 100644
index 36527c49eaf7..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb16.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SRGGB16:
-.. _v4l2-pix-fmt-sbggr16:
-.. _v4l2-pix-fmt-sgbrg16:
-.. _v4l2-pix-fmt-sgrbg16:
-
-
-***************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB16 ('RG16'), V4L2_PIX_FMT_SGRBG16 ('GR16'), V4L2_PIX_FMT_SGBRG16 ('GB16'), V4L2_PIX_FMT_SBGGR16 ('BYR2'),
-***************************************************************************************************************************
-
-
-16-bit Bayer formats
-
-
-Description
-===========
-
-These four pixel formats are raw sRGB / Bayer formats with 16 bits per
-sample. Each sample is stored in a 16-bit word. Each n-pixel row contains
-n/2 green samples and n/2 blue or red samples, with alternating red and blue
-rows. Bytes are stored in memory in little endian order. They are
-conventionally described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is
-an example of a small V4L2_PIX_FMT_SBGGR16 image:
-
-**Byte Order.**
-Each cell is one byte.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - B\ :sub:`00low`
-      - B\ :sub:`00high`
-      - G\ :sub:`01low`
-      - G\ :sub:`01high`
-      - B\ :sub:`02low`
-      - B\ :sub:`02high`
-      - G\ :sub:`03low`
-      - G\ :sub:`03high`
-    * - start + 8:
-      - G\ :sub:`10low`
-      - G\ :sub:`10high`
-      - R\ :sub:`11low`
-      - R\ :sub:`11high`
-      - G\ :sub:`12low`
-      - G\ :sub:`12high`
-      - R\ :sub:`13low`
-      - R\ :sub:`13high`
-    * - start + 16:
-      - B\ :sub:`20low`
-      - B\ :sub:`20high`
-      - G\ :sub:`21low`
-      - G\ :sub:`21high`
-      - B\ :sub:`22low`
-      - B\ :sub:`22high`
-      - G\ :sub:`23low`
-      - G\ :sub:`23high`
-    * - start + 24:
-      - G\ :sub:`30low`
-      - G\ :sub:`30high`
-      - R\ :sub:`31low`
-      - R\ :sub:`31high`
-      - G\ :sub:`32low`
-      - G\ :sub:`32high`
-      - R\ :sub:`33low`
-      - R\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb8.rst b/Documentation/media/uapi/v4l/pixfmt-srggb8.rst
deleted file mode 100644
index f5233c1e2314..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-srggb8.rst
+++ /dev/null
@@ -1,61 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-SRGGB8:
-.. _v4l2-pix-fmt-sbggr8:
-.. _v4l2-pix-fmt-sgbrg8:
-.. _v4l2-pix-fmt-sgrbg8:
-
-***************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB8 ('RGGB'), V4L2_PIX_FMT_SGRBG8 ('GRBG'), V4L2_PIX_FMT_SGBRG8 ('GBRG'), V4L2_PIX_FMT_SBGGR8 ('BA81'),
-***************************************************************************************************************************
-
-
-8-bit Bayer formats
-
-
-Description
-===========
-
-These four pixel formats are raw sRGB / Bayer formats with 8 bits per
-sample. Each sample is stored in a byte. Each n-pixel row contains n/2
-green samples and n/2 blue or red samples, with alternating red and
-blue rows. They are conventionally described as GRGR... BGBG...,
-RGRG... GBGB..., etc. Below is an example of a small V4L2_PIX_FMT_SBGGR8 image:
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - B\ :sub:`00`
-      - G\ :sub:`01`
-      - B\ :sub:`02`
-      - G\ :sub:`03`
-    * - start + 4:
-      - G\ :sub:`10`
-      - R\ :sub:`11`
-      - G\ :sub:`12`
-      - R\ :sub:`13`
-    * - start + 8:
-      - B\ :sub:`20`
-      - G\ :sub:`21`
-      - B\ :sub:`22`
-      - G\ :sub:`23`
-    * - start + 12:
-      - G\ :sub:`30`
-      - R\ :sub:`31`
-      - G\ :sub:`32`
-      - R\ :sub:`33`
diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst b/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst
deleted file mode 100644
index b7d3d6ccebc5..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-TCH-FMT-DELTA-TD08:
-
-********************************
-V4L2_TCH_FMT_DELTA_TD08 ('TD08')
-********************************
-
-*man V4L2_TCH_FMT_DELTA_TD08(2)*
-
-8-bit signed Touch Delta
-
-Description
-===========
-
-This format represents delta data from a touch controller.
-
-Delta values may range from -128 to 127. Typically the values will vary through
-a small range depending on whether the sensor is touched or not. The full value
-may be seen if one of the touchscreen nodes has a fault or the line is not
-connected.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       2 1 1 1 1
-
-    * - start + 0:
-      - D'\ :sub:`00`
-      - D'\ :sub:`01`
-      - D'\ :sub:`02`
-      - D'\ :sub:`03`
-    * - start + 4:
-      - D'\ :sub:`10`
-      - D'\ :sub:`11`
-      - D'\ :sub:`12`
-      - D'\ :sub:`13`
-    * - start + 8:
-      - D'\ :sub:`20`
-      - D'\ :sub:`21`
-      - D'\ :sub:`22`
-      - D'\ :sub:`23`
-    * - start + 12:
-      - D'\ :sub:`30`
-      - D'\ :sub:`31`
-      - D'\ :sub:`32`
-      - D'\ :sub:`33`
diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst
deleted file mode 100644
index 6f1be873bec1..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst
+++ /dev/null
@@ -1,74 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-TCH-FMT-DELTA-TD16:
-
-********************************
-V4L2_TCH_FMT_DELTA_TD16 ('TD16')
-********************************
-
-*man V4L2_TCH_FMT_DELTA_TD16(2)*
-
-16-bit signed little endian Touch Delta
-
-
-Description
-===========
-
-This format represents delta data from a touch controller.
-
-Delta values may range from -32768 to 32767. Typically the values will vary
-through a small range depending on whether the sensor is touched or not. The
-full value may be seen if one of the touchscreen nodes has a fault or the line
-is not connected.
-
-**Byte Order.**
-Each cell is one byte.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       2 1 1 1 1 1 1 1 1
-
-    * - start + 0:
-      - D'\ :sub:`00low`
-      - D'\ :sub:`00high`
-      - D'\ :sub:`01low`
-      - D'\ :sub:`01high`
-      - D'\ :sub:`02low`
-      - D'\ :sub:`02high`
-      - D'\ :sub:`03low`
-      - D'\ :sub:`03high`
-    * - start + 8:
-      - D'\ :sub:`10low`
-      - D'\ :sub:`10high`
-      - D'\ :sub:`11low`
-      - D'\ :sub:`11high`
-      - D'\ :sub:`12low`
-      - D'\ :sub:`12high`
-      - D'\ :sub:`13low`
-      - D'\ :sub:`13high`
-    * - start + 16:
-      - D'\ :sub:`20low`
-      - D'\ :sub:`20high`
-      - D'\ :sub:`21low`
-      - D'\ :sub:`21high`
-      - D'\ :sub:`22low`
-      - D'\ :sub:`22high`
-      - D'\ :sub:`23low`
-      - D'\ :sub:`23high`
-    * - start + 24:
-      - D'\ :sub:`30low`
-      - D'\ :sub:`30high`
-      - D'\ :sub:`31low`
-      - D'\ :sub:`31high`
-      - D'\ :sub:`32low`
-      - D'\ :sub:`32high`
-      - D'\ :sub:`33low`
-      - D'\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst b/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst
deleted file mode 100644
index 2d447475aaa7..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-TCH-FMT-TU08:
-
-**************************
-V4L2_TCH_FMT_TU08 ('TU08')
-**************************
-
-*man V4L2_TCH_FMT_TU08(2)*
-
-8-bit unsigned raw touch data
-
-Description
-===========
-
-This format represents unsigned 8-bit data from a touch controller.
-
-This may be used for output for raw and reference data. Values may range from
-0 to 255.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       2 1 1 1 1
-
-    * - start + 0:
-      - R'\ :sub:`00`
-      - R'\ :sub:`01`
-      - R'\ :sub:`02`
-      - R'\ :sub:`03`
-    * - start + 4:
-      - R'\ :sub:`10`
-      - R'\ :sub:`11`
-      - R'\ :sub:`12`
-      - R'\ :sub:`13`
-    * - start + 8:
-      - R'\ :sub:`20`
-      - R'\ :sub:`21`
-      - R'\ :sub:`22`
-      - R'\ :sub:`23`
-    * - start + 12:
-      - R'\ :sub:`30`
-      - R'\ :sub:`31`
-      - R'\ :sub:`32`
-      - R'\ :sub:`33`
diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst
deleted file mode 100644
index cb3da6687a58..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst
+++ /dev/null
@@ -1,73 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-TCH-FMT-TU16:
-
-********************************
-V4L2_TCH_FMT_TU16 ('TU16')
-********************************
-
-*man V4L2_TCH_FMT_TU16(2)*
-
-16-bit unsigned little endian raw touch data
-
-
-Description
-===========
-
-This format represents unsigned 16-bit data from a touch controller.
-
-This may be used for output for raw and reference data. Values may range from
-0 to 65535.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       2 1 1 1 1 1 1 1 1
-
-    * - start + 0:
-      - R'\ :sub:`00low`
-      - R'\ :sub:`00high`
-      - R'\ :sub:`01low`
-      - R'\ :sub:`01high`
-      - R'\ :sub:`02low`
-      - R'\ :sub:`02high`
-      - R'\ :sub:`03low`
-      - R'\ :sub:`03high`
-    * - start + 8:
-      - R'\ :sub:`10low`
-      - R'\ :sub:`10high`
-      - R'\ :sub:`11low`
-      - R'\ :sub:`11high`
-      - R'\ :sub:`12low`
-      - R'\ :sub:`12high`
-      - R'\ :sub:`13low`
-      - R'\ :sub:`13high`
-    * - start + 16:
-      - R'\ :sub:`20low`
-      - R'\ :sub:`20high`
-      - R'\ :sub:`21low`
-      - R'\ :sub:`21high`
-      - R'\ :sub:`22low`
-      - R'\ :sub:`22high`
-      - R'\ :sub:`23low`
-      - R'\ :sub:`23high`
-    * - start + 24:
-      - R'\ :sub:`30low`
-      - R'\ :sub:`30high`
-      - R'\ :sub:`31low`
-      - R'\ :sub:`31high`
-      - R'\ :sub:`32low`
-      - R'\ :sub:`32high`
-      - R'\ :sub:`33low`
-      - R'\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-uv8.rst b/Documentation/media/uapi/v4l/pixfmt-uv8.rst
deleted file mode 100644
index 6008c898305d..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-uv8.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-UV8:
-
-************************
-V4L2_PIX_FMT_UV8 ('UV8')
-************************
-
-
-UV plane interleaved
-
-
-Description
-===========
-
-In this format there is no Y plane, Only CbCr plane. ie (UV interleaved)
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Cb\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Cb\ :sub:`01`
-      - Cr\ :sub:`01`
-    * - start + 4:
-      - Cb\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Cb\ :sub:`11`
-      - Cr\ :sub:`11`
-    * - start + 8:
-      - Cb\ :sub:`20`
-      - Cr\ :sub:`20`
-      - Cb\ :sub:`21`
-      - Cr\ :sub:`21`
-    * - start + 12:
-      - Cb\ :sub:`30`
-      - Cr\ :sub:`30`
-      - Cb\ :sub:`31`
-      - Cr\ :sub:`31`
diff --git a/Documentation/media/uapi/v4l/pixfmt-uyvy.rst b/Documentation/media/uapi/v4l/pixfmt-uyvy.rst
deleted file mode 100644
index 72da2639d37e..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-uyvy.rst
+++ /dev/null
@@ -1,117 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-UYVY:
-
-**************************
-V4L2_PIX_FMT_UYVY ('UYVY')
-**************************
-
-
-Variation of ``V4L2_PIX_FMT_YUYV`` with different order of samples in
-memory
-
-
-Description
-===========
-
-In this format each four bytes is two pixels. Each four bytes is two
-Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr
-belong to both pixels. As you can see, the Cr and Cb components have
-half the horizontal resolution of the Y component.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Cb\ :sub:`00`
-      - Y'\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Cb\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Cr\ :sub:`01`
-      - Y'\ :sub:`03`
-    * - start + 8:
-      - Cb\ :sub:`10`
-      - Y'\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Cb\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Cr\ :sub:`11`
-      - Y'\ :sub:`13`
-    * - start + 16:
-      - Cb\ :sub:`20`
-      - Y'\ :sub:`20`
-      - Cr\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Cb\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Cr\ :sub:`21`
-      - Y'\ :sub:`23`
-    * - start + 24:
-      - Cb\ :sub:`30`
-      - Y'\ :sub:`30`
-      - Cr\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Cb\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Cr\ :sub:`31`
-      - Y'\ :sub:`33`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 1
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 2
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 3
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst
deleted file mode 100644
index 054275c0dfc1..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst
+++ /dev/null
@@ -1,138 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-******************************
-Multi-planar format structures
-******************************
-
-The struct :c:type:`v4l2_plane_pix_format` structures define size
-and layout for each of the planes in a multi-planar format. The
-struct :c:type:`v4l2_pix_format_mplane` structure contains
-information common to all planes (such as image width and height) and an
-array of struct :c:type:`v4l2_plane_pix_format` structures,
-describing all planes of that format.
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_plane_pix_format
-
-.. flat-table:: struct v4l2_plane_pix_format
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``sizeimage``
-      - Maximum size in bytes required for image data in this plane,
-	set by the driver. When the image consists of variable length
-	compressed data this is the number of bytes required by the
-	codec to support the worst-case compression scenario.
-
-	The driver will set the value for uncompressed images.
-
-	Clients are allowed to set the sizeimage field for variable length
-	compressed data flagged with ``V4L2_FMT_FLAG_COMPRESSED`` at
-	:ref:`VIDIOC_ENUM_FMT`, but the driver may ignore it and set the
-	value itself, or it may modify the provided value based on
-	alignment requirements or minimum/maximum size requirements.
-	If the client wants to leave this to the driver, then it should
-	set sizeimage to 0.
-    * - __u32
-      - ``bytesperline``
-      - Distance in bytes between the leftmost pixels in two adjacent
-	lines. See struct :c:type:`v4l2_pix_format`.
-    * - __u16
-      - ``reserved[6]``
-      - Reserved for future extensions. Should be zeroed by drivers and
-	applications.
-
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{4.4cm}|p{5.6cm}|p{7.5cm}|
-
-.. c:type:: v4l2_pix_format_mplane
-
-.. flat-table:: struct v4l2_pix_format_mplane
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``width``
-      - Image width in pixels. See struct
-	:c:type:`v4l2_pix_format`.
-    * - __u32
-      - ``height``
-      - Image height in pixels. See struct
-	:c:type:`v4l2_pix_format`.
-    * - __u32
-      - ``pixelformat``
-      - The pixel format. Both single- and multi-planar four character
-	codes can be used.
-    * - __u32
-      - ``field``
-      - Field order, from enum :c:type:`v4l2_field`.
-        See struct :c:type:`v4l2_pix_format`.
-    * - __u32
-      - ``colorspace``
-      - Colorspace encoding, from enum :c:type:`v4l2_colorspace`.
-        See struct :c:type:`v4l2_pix_format`.
-    * - struct :c:type:`v4l2_plane_pix_format`
-      - ``plane_fmt[VIDEO_MAX_PLANES]``
-      - An array of structures describing format of each plane this pixel
-	format consists of. The number of valid entries in this array has
-	to be put in the ``num_planes`` field.
-    * - __u8
-      - ``num_planes``
-      - Number of planes (i.e. separate memory buffers) for this format
-	and the number of valid entries in the ``plane_fmt`` array.
-    * - __u8
-      - ``flags``
-      - Flags set by the application or driver, see :ref:`format-flags`.
-    * - union {
-      - (anonymous)
-    * - __u8
-      - ``ycbcr_enc``
-      - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - __u8
-      - ``hsv_enc``
-      - HSV encoding, from enum :c:type:`v4l2_hsv_encoding`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - }
-      -
-    * - __u8
-      - ``quantization``
-      - Quantization range, from enum :c:type:`v4l2_quantization`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - __u8
-      - ``xfer_func``
-      - Transfer function, from enum :c:type:`v4l2_xfer_func`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - __u8
-      - ``reserved[7]``
-      - Reserved for future extensions. Should be zeroed by drivers and
-	applications.
-
-.. raw:: latex
-
-    \normalsize
diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst
deleted file mode 100644
index a993b861bf75..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst
+++ /dev/null
@@ -1,171 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-******************************
-Single-planar format structure
-******************************
-
-.. tabularcolumns:: |p{4.0cm}|p{2.5cm}|p{11.0cm}|
-
-.. c:type:: v4l2_pix_format
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_pix_format
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``width``
-      - Image width in pixels.
-    * - __u32
-      - ``height``
-      - Image height in pixels. If ``field`` is one of ``V4L2_FIELD_TOP``,
-	``V4L2_FIELD_BOTTOM`` or ``V4L2_FIELD_ALTERNATE`` then height
-	refers to the number of lines in the field, otherwise it refers to
-	the number of lines in the frame (which is twice the field height
-	for interlaced formats).
-    * - :cspan:`2` Applications set these fields to request an image
-	size, drivers return the closest possible values. In case of
-	planar formats the ``width`` and ``height`` applies to the largest
-	plane. To avoid ambiguities drivers must return values rounded up
-	to a multiple of the scale factor of any smaller planes. For
-	example when the image format is YUV 4:2:0, ``width`` and
-	``height`` must be multiples of two.
-
-	For compressed formats that contain the resolution information encoded
-	inside the stream, when fed to a stateful mem2mem decoder, the fields
-	may be zero to rely on the decoder to detect the right values. For more
-	details see :ref:`decoder` and format descriptions.
-    * - __u32
-      - ``pixelformat``
-      - The pixel format or type of compression, set by the application.
-	This is a little endian
-	:ref:`four character code <v4l2-fourcc>`. V4L2 defines standard
-	RGB formats in :ref:`pixfmt-rgb`, YUV formats in
-	:ref:`yuv-formats`, and reserved codes in
-	:ref:`reserved-formats`
-    * - __u32
-      - ``field``
-      - Field order, from enum :c:type:`v4l2_field`.
-        Video images are typically interlaced. Applications can request to
-	capture or output only the top or bottom field, or both fields
-	interlaced or sequentially stored in one buffer or alternating in
-	separate buffers. Drivers return the actual field order selected.
-	For more details on fields see :ref:`field-order`.
-    * - __u32
-      - ``bytesperline``
-      - Distance in bytes between the leftmost pixels in two adjacent
-	lines.
-    * - :cspan:`2`
-
-	Both applications and drivers can set this field to request
-	padding bytes at the end of each line. Drivers however may ignore
-	the value requested by the application, returning ``width`` times
-	bytes per pixel or a larger value required by the hardware. That
-	implies applications can just set this field to zero to get a
-	reasonable default.
-
-	Video hardware may access padding bytes, therefore they must
-	reside in accessible memory. Consider cases where padding bytes
-	after the last line of an image cross a system page boundary.
-	Input devices may write padding bytes, the value is undefined.
-	Output devices ignore the contents of padding bytes.
-
-	When the image format is planar the ``bytesperline`` value applies
-	to the first plane and is divided by the same factor as the
-	``width`` field for the other planes. For example the Cb and Cr
-	planes of a YUV 4:2:0 image have half as many padding bytes
-	following each line as the Y plane. To avoid ambiguities drivers
-	must return a ``bytesperline`` value rounded up to a multiple of
-	the scale factor.
-
-	For compressed formats the ``bytesperline`` value makes no sense.
-	Applications and drivers must set this to 0 in that case.
-    * - __u32
-      - ``sizeimage``
-      - Size in bytes of the buffer to hold a complete image, set by the
-	driver. Usually this is ``bytesperline`` times ``height``. When
-	the image consists of variable length compressed data this is the
-	number of bytes required by the codec to support the worst-case
-	compression scenario.
-
-	The driver will set the value for uncompressed images.
-
-	Clients are allowed to set the sizeimage field for variable length
-	compressed data flagged with ``V4L2_FMT_FLAG_COMPRESSED`` at
-	:ref:`VIDIOC_ENUM_FMT`, but the driver may ignore it and set the
-	value itself, or it may modify the provided value based on
-	alignment requirements or minimum/maximum size requirements.
-	If the client wants to leave this to the driver, then it should
-	set sizeimage to 0.
-    * - __u32
-      - ``colorspace``
-      - Image colorspace, from enum :c:type:`v4l2_colorspace`.
-        This information supplements the ``pixelformat`` and must be set
-	by the driver for capture streams and by the application for
-	output streams, see :ref:`colorspaces`.
-    * - __u32
-      - ``priv``
-      - This field indicates whether the remaining fields of the
-	struct :c:type:`v4l2_pix_format`, also called the
-	extended fields, are valid. When set to
-	``V4L2_PIX_FMT_PRIV_MAGIC``, it indicates that the extended fields
-	have been correctly initialized. When set to any other value it
-	indicates that the extended fields contain undefined values.
-
-	Applications that wish to use the pixel format extended fields
-	must first ensure that the feature is supported by querying the
-	device for the :ref:`V4L2_CAP_EXT_PIX_FORMAT <querycap>`
-	capability. If the capability isn't set the pixel format extended
-	fields are not supported and using the extended fields will lead
-	to undefined results.
-
-	To use the extended fields, applications must set the ``priv``
-	field to ``V4L2_PIX_FMT_PRIV_MAGIC``, initialize all the extended
-	fields and zero the unused bytes of the
-	struct :c:type:`v4l2_format` ``raw_data`` field.
-
-	When the ``priv`` field isn't set to ``V4L2_PIX_FMT_PRIV_MAGIC``
-	drivers must act as if all the extended fields were set to zero.
-	On return drivers must set the ``priv`` field to
-	``V4L2_PIX_FMT_PRIV_MAGIC`` and all the extended fields to
-	applicable values.
-    * - __u32
-      - ``flags``
-      - Flags set by the application or driver, see :ref:`format-flags`.
-    * - union {
-      - (anonymous)
-    * - __u32
-      - ``ycbcr_enc``
-      - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - __u32
-      - ``hsv_enc``
-      - HSV encoding, from enum :c:type:`v4l2_hsv_encoding`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - }
-      -
-    * - __u32
-      - ``quantization``
-      - Quantization range, from enum :c:type:`v4l2_quantization`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - __u32
-      - ``xfer_func``
-      - Transfer function, from enum :c:type:`v4l2_xfer_func`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
diff --git a/Documentation/media/uapi/v4l/pixfmt-vyuy.rst b/Documentation/media/uapi/v4l/pixfmt-vyuy.rst
deleted file mode 100644
index 39b99707cd99..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-vyuy.rst
+++ /dev/null
@@ -1,115 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-VYUY:
-
-**************************
-V4L2_PIX_FMT_VYUY ('VYUY')
-**************************
-
-
-Variation of ``V4L2_PIX_FMT_YUYV`` with different order of samples in
-memory
-
-
-Description
-===========
-
-In this format each four bytes is two pixels. Each four bytes is two
-Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr
-belong to both pixels. As you can see, the Cr and Cb components have
-half the horizontal resolution of the Y component.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Cr\ :sub:`00`
-      - Y'\ :sub:`00`
-      - Cb\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Cr\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Cb\ :sub:`01`
-      - Y'\ :sub:`03`
-    * - start + 8:
-      - Cr\ :sub:`10`
-      - Y'\ :sub:`10`
-      - Cb\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Cr\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Cb\ :sub:`11`
-      - Y'\ :sub:`13`
-    * - start + 16:
-      - Cr\ :sub:`20`
-      - Y'\ :sub:`20`
-      - Cb\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Cr\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Cb\ :sub:`21`
-      - Y'\ :sub:`23`
-    * - start + 24:
-      - Cr\ :sub:`30`
-      - Y'\ :sub:`30`
-      - Cb\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Cr\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Cb\ :sub:`31`
-      - Y'\ :sub:`33`
-
-
-**Color Sample Location:**
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      -
-      - 2
-      - 3
-    * - 0
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 1
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 2
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 3
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-y10.rst b/Documentation/media/uapi/v4l/pixfmt-y10.rst
deleted file mode 100644
index 63277686764a..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y10.rst
+++ /dev/null
@@ -1,72 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y10:
-
-*************************
-V4L2_PIX_FMT_Y10 ('Y10 ')
-*************************
-
-
-Grey-scale image
-
-
-Description
-===========
-
-This is a grey-scale image with a depth of 10 bits per pixel. Pixels are
-stored in 16-bit words with unused high bits padded with 0. The least
-significant byte is stored at lower memory addresses (little-endian).
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00low`
-      - Y'\ :sub:`00high`
-      - Y'\ :sub:`01low`
-      - Y'\ :sub:`01high`
-      - Y'\ :sub:`02low`
-      - Y'\ :sub:`02high`
-      - Y'\ :sub:`03low`
-      - Y'\ :sub:`03high`
-    * - start + 8:
-      - Y'\ :sub:`10low`
-      - Y'\ :sub:`10high`
-      - Y'\ :sub:`11low`
-      - Y'\ :sub:`11high`
-      - Y'\ :sub:`12low`
-      - Y'\ :sub:`12high`
-      - Y'\ :sub:`13low`
-      - Y'\ :sub:`13high`
-    * - start + 16:
-      - Y'\ :sub:`20low`
-      - Y'\ :sub:`20high`
-      - Y'\ :sub:`21low`
-      - Y'\ :sub:`21high`
-      - Y'\ :sub:`22low`
-      - Y'\ :sub:`22high`
-      - Y'\ :sub:`23low`
-      - Y'\ :sub:`23high`
-    * - start + 24:
-      - Y'\ :sub:`30low`
-      - Y'\ :sub:`30high`
-      - Y'\ :sub:`31low`
-      - Y'\ :sub:`31high`
-      - Y'\ :sub:`32low`
-      - Y'\ :sub:`32high`
-      - Y'\ :sub:`33low`
-      - Y'\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-y10b.rst b/Documentation/media/uapi/v4l/pixfmt-y10b.rst
deleted file mode 100644
index 49c4dd432413..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y10b.rst
+++ /dev/null
@@ -1,40 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y10BPACK:
-
-******************************
-V4L2_PIX_FMT_Y10BPACK ('Y10B')
-******************************
-
-Grey-scale image as a bit-packed array
-
-
-Description
-===========
-
-This is a packed grey-scale image format with a depth of 10 bits per
-pixel. Pixels are stored in a bit-packed array of 10bit bits per pixel,
-with no padding between them and with the most significant bits coming
-first from the left.
-
-**Bit-packed representation.**
-
-pixels cross the byte boundary and have a ratio of 5 bytes for each 4
-pixels.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - Y'\ :sub:`00[9:2]`
-      - Y'\ :sub:`00[1:0]`\ Y'\ :sub:`01[9:4]`
-      - Y'\ :sub:`01[3:0]`\ Y'\ :sub:`02[9:6]`
-      - Y'\ :sub:`02[5:0]`\ Y'\ :sub:`03[9:8]`
-      - Y'\ :sub:`03[7:0]`
diff --git a/Documentation/media/uapi/v4l/pixfmt-y10p.rst b/Documentation/media/uapi/v4l/pixfmt-y10p.rst
deleted file mode 100644
index 39cd789dcb59..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y10p.rst
+++ /dev/null
@@ -1,50 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y10P:
-
-******************************
-V4L2_PIX_FMT_Y10P ('Y10P')
-******************************
-
-Grey-scale image as a MIPI RAW10 packed array
-
-
-Description
-===========
-
-This is a packed grey-scale image format with a depth of 10 bits per
-pixel. Every four consecutive pixels are packed into 5 bytes. Each of
-the first 4 bytes contain the 8 high order bits of the pixels, and
-the 5th byte contains the 2 least significants bits of each pixel,
-in the same order.
-
-**Bit-packed representation.**
-
-.. raw:: latex
-
-    \small
-
-.. tabularcolumns:: |p{1.2cm}||p{1.2cm}||p{1.2cm}||p{1.2cm}|p{3.2cm}|p{3.2cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 8 8 8 8 64
-
-    * - Y'\ :sub:`00[9:2]`
-      - Y'\ :sub:`01[9:2]`
-      - Y'\ :sub:`02[9:2]`
-      - Y'\ :sub:`03[9:2]`
-      - Y'\ :sub:`03[1:0]`\ (bits 7--6) Y'\ :sub:`02[1:0]`\ (bits 5--4)
-	Y'\ :sub:`01[1:0]`\ (bits 3--2) Y'\ :sub:`00[1:0]`\ (bits 1--0)
-
-.. raw:: latex
-
-    \normalsize
diff --git a/Documentation/media/uapi/v4l/pixfmt-y12.rst b/Documentation/media/uapi/v4l/pixfmt-y12.rst
deleted file mode 100644
index 33a943b4996a..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y12.rst
+++ /dev/null
@@ -1,72 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y12:
-
-*************************
-V4L2_PIX_FMT_Y12 ('Y12 ')
-*************************
-
-
-Grey-scale image
-
-
-Description
-===========
-
-This is a grey-scale image with a depth of 12 bits per pixel. Pixels are
-stored in 16-bit words with unused high bits padded with 0. The least
-significant byte is stored at lower memory addresses (little-endian).
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00low`
-      - Y'\ :sub:`00high`
-      - Y'\ :sub:`01low`
-      - Y'\ :sub:`01high`
-      - Y'\ :sub:`02low`
-      - Y'\ :sub:`02high`
-      - Y'\ :sub:`03low`
-      - Y'\ :sub:`03high`
-    * - start + 8:
-      - Y'\ :sub:`10low`
-      - Y'\ :sub:`10high`
-      - Y'\ :sub:`11low`
-      - Y'\ :sub:`11high`
-      - Y'\ :sub:`12low`
-      - Y'\ :sub:`12high`
-      - Y'\ :sub:`13low`
-      - Y'\ :sub:`13high`
-    * - start + 16:
-      - Y'\ :sub:`20low`
-      - Y'\ :sub:`20high`
-      - Y'\ :sub:`21low`
-      - Y'\ :sub:`21high`
-      - Y'\ :sub:`22low`
-      - Y'\ :sub:`22high`
-      - Y'\ :sub:`23low`
-      - Y'\ :sub:`23high`
-    * - start + 24:
-      - Y'\ :sub:`30low`
-      - Y'\ :sub:`30high`
-      - Y'\ :sub:`31low`
-      - Y'\ :sub:`31high`
-      - Y'\ :sub:`32low`
-      - Y'\ :sub:`32high`
-      - Y'\ :sub:`33low`
-      - Y'\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-y12i.rst b/Documentation/media/uapi/v4l/pixfmt-y12i.rst
deleted file mode 100644
index 1d4a14e1ec6e..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y12i.rst
+++ /dev/null
@@ -1,43 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y12I:
-
-**************************
-V4L2_PIX_FMT_Y12I ('Y12I')
-**************************
-
-Interleaved grey-scale image, e.g. from a stereo-pair
-
-
-Description
-===========
-
-This is a grey-scale image with a depth of 12 bits per pixel, but with
-pixels from 2 sources interleaved and bit-packed. Each pixel is stored
-in a 24-bit word in the little-endian order. On a little-endian machine
-these pixels can be deinterlaced using
-
-.. code-block:: c
-
-    __u8 *buf;
-    left0 = 0xfff & *(__u16 *)buf;
-    right0 = *(__u16 *)(buf + 1) >> 4;
-
-**Bit-packed representation.**
-pixels cross the byte boundary and have a ratio of 3 bytes for each
-interleaved pixel.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - Y'\ :sub:`0left[7:0]`
-      - Y'\ :sub:`0right[3:0]`\ Y'\ :sub:`0left[11:8]`
-      - Y'\ :sub:`0right[11:4]`
diff --git a/Documentation/media/uapi/v4l/pixfmt-y14.rst b/Documentation/media/uapi/v4l/pixfmt-y14.rst
deleted file mode 100644
index 5c260f8da088..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y14.rst
+++ /dev/null
@@ -1,72 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y14:
-
-*************************
-V4L2_PIX_FMT_Y14 ('Y14 ')
-*************************
-
-
-Grey-scale image
-
-
-Description
-===========
-
-This is a grey-scale image with a depth of 14 bits per pixel. Pixels are
-stored in 16-bit words with unused high bits padded with 0. The least
-significant byte is stored at lower memory addresses (little-endian).
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00low`
-      - Y'\ :sub:`00high`
-      - Y'\ :sub:`01low`
-      - Y'\ :sub:`01high`
-      - Y'\ :sub:`02low`
-      - Y'\ :sub:`02high`
-      - Y'\ :sub:`03low`
-      - Y'\ :sub:`03high`
-    * - start + 8:
-      - Y'\ :sub:`10low`
-      - Y'\ :sub:`10high`
-      - Y'\ :sub:`11low`
-      - Y'\ :sub:`11high`
-      - Y'\ :sub:`12low`
-      - Y'\ :sub:`12high`
-      - Y'\ :sub:`13low`
-      - Y'\ :sub:`13high`
-    * - start + 16:
-      - Y'\ :sub:`20low`
-      - Y'\ :sub:`20high`
-      - Y'\ :sub:`21low`
-      - Y'\ :sub:`21high`
-      - Y'\ :sub:`22low`
-      - Y'\ :sub:`22high`
-      - Y'\ :sub:`23low`
-      - Y'\ :sub:`23high`
-    * - start + 24:
-      - Y'\ :sub:`30low`
-      - Y'\ :sub:`30high`
-      - Y'\ :sub:`31low`
-      - Y'\ :sub:`31high`
-      - Y'\ :sub:`32low`
-      - Y'\ :sub:`32high`
-      - Y'\ :sub:`33low`
-      - Y'\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-y16-be.rst b/Documentation/media/uapi/v4l/pixfmt-y16-be.rst
deleted file mode 100644
index 1e72bfe2d557..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y16-be.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y16-BE:
-
-****************************************
-V4L2_PIX_FMT_Y16_BE ('Y16 ' | (1 << 31))
-****************************************
-
-
-Grey-scale image
-
-
-Description
-===========
-
-This is a grey-scale image with a depth of 16 bits per pixel. The most
-significant byte is stored at lower memory addresses (big-endian).
-
-.. note::
-
-   The actual sampling precision may be lower than 16 bits, for
-   example 10 bits per pixel with values in range 0 to 1023.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00high`
-      - Y'\ :sub:`00low`
-      - Y'\ :sub:`01high`
-      - Y'\ :sub:`01low`
-      - Y'\ :sub:`02high`
-      - Y'\ :sub:`02low`
-      - Y'\ :sub:`03high`
-      - Y'\ :sub:`03low`
-    * - start + 8:
-      - Y'\ :sub:`10high`
-      - Y'\ :sub:`10low`
-      - Y'\ :sub:`11high`
-      - Y'\ :sub:`11low`
-      - Y'\ :sub:`12high`
-      - Y'\ :sub:`12low`
-      - Y'\ :sub:`13high`
-      - Y'\ :sub:`13low`
-    * - start + 16:
-      - Y'\ :sub:`20high`
-      - Y'\ :sub:`20low`
-      - Y'\ :sub:`21high`
-      - Y'\ :sub:`21low`
-      - Y'\ :sub:`22high`
-      - Y'\ :sub:`22low`
-      - Y'\ :sub:`23high`
-      - Y'\ :sub:`23low`
-    * - start + 24:
-      - Y'\ :sub:`30high`
-      - Y'\ :sub:`30low`
-      - Y'\ :sub:`31high`
-      - Y'\ :sub:`31low`
-      - Y'\ :sub:`32high`
-      - Y'\ :sub:`32low`
-      - Y'\ :sub:`33high`
-      - Y'\ :sub:`33low`
diff --git a/Documentation/media/uapi/v4l/pixfmt-y16.rst b/Documentation/media/uapi/v4l/pixfmt-y16.rst
deleted file mode 100644
index f77d900db131..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y16.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y16:
-
-*************************
-V4L2_PIX_FMT_Y16 ('Y16 ')
-*************************
-
-
-Grey-scale image
-
-
-Description
-===========
-
-This is a grey-scale image with a depth of 16 bits per pixel. The least
-significant byte is stored at lower memory addresses (little-endian).
-
-.. note::
-
-   The actual sampling precision may be lower than 16 bits, for
-   example 10 bits per pixel with values in range 0 to 1023.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00low`
-      - Y'\ :sub:`00high`
-      - Y'\ :sub:`01low`
-      - Y'\ :sub:`01high`
-      - Y'\ :sub:`02low`
-      - Y'\ :sub:`02high`
-      - Y'\ :sub:`03low`
-      - Y'\ :sub:`03high`
-    * - start + 8:
-      - Y'\ :sub:`10low`
-      - Y'\ :sub:`10high`
-      - Y'\ :sub:`11low`
-      - Y'\ :sub:`11high`
-      - Y'\ :sub:`12low`
-      - Y'\ :sub:`12high`
-      - Y'\ :sub:`13low`
-      - Y'\ :sub:`13high`
-    * - start + 16:
-      - Y'\ :sub:`20low`
-      - Y'\ :sub:`20high`
-      - Y'\ :sub:`21low`
-      - Y'\ :sub:`21high`
-      - Y'\ :sub:`22low`
-      - Y'\ :sub:`22high`
-      - Y'\ :sub:`23low`
-      - Y'\ :sub:`23high`
-    * - start + 24:
-      - Y'\ :sub:`30low`
-      - Y'\ :sub:`30high`
-      - Y'\ :sub:`31low`
-      - Y'\ :sub:`31high`
-      - Y'\ :sub:`32low`
-      - Y'\ :sub:`32high`
-      - Y'\ :sub:`33low`
-      - Y'\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-y41p.rst b/Documentation/media/uapi/v4l/pixfmt-y41p.rst
deleted file mode 100644
index 829c68afd8d7..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y41p.rst
+++ /dev/null
@@ -1,158 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y41P:
-
-**************************
-V4L2_PIX_FMT_Y41P ('Y41P')
-**************************
-
-
-Format with ¼ horizontal chroma resolution, also known as YUV 4:1:1
-
-
-Description
-===========
-
-In this format each 12 bytes is eight pixels. In the twelve bytes are
-two CbCr pairs and eight Y's. The first CbCr pair goes with the first
-four Y's, and the second CbCr pair goes with the other four Y's. The Cb
-and Cr components have one fourth the horizontal resolution of the Y
-component.
-
-Do not confuse this format with
-:ref:`V4L2_PIX_FMT_YUV411P <V4L2-PIX-FMT-YUV411P>`. Y41P is derived
-from "YUV 4:1:1 *packed*", while YUV411P stands for "YUV 4:1:1
-*planar*".
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Cb\ :sub:`00`
-      - Y'\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Cb\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Cr\ :sub:`01`
-      - Y'\ :sub:`03`
-      - Y'\ :sub:`04`
-      - Y'\ :sub:`05`
-      - Y'\ :sub:`06`
-      - Y'\ :sub:`07`
-    * - start + 12:
-      - Cb\ :sub:`10`
-      - Y'\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Cb\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Cr\ :sub:`11`
-      - Y'\ :sub:`13`
-      - Y'\ :sub:`14`
-      - Y'\ :sub:`15`
-      - Y'\ :sub:`16`
-      - Y'\ :sub:`17`
-    * - start + 24:
-      - Cb\ :sub:`20`
-      - Y'\ :sub:`20`
-      - Cr\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Cb\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Cr\ :sub:`21`
-      - Y'\ :sub:`23`
-      - Y'\ :sub:`24`
-      - Y'\ :sub:`25`
-      - Y'\ :sub:`26`
-      - Y'\ :sub:`27`
-    * - start + 36:
-      - Cb\ :sub:`30`
-      - Y'\ :sub:`30`
-      - Cr\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Cb\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Cr\ :sub:`31`
-      - Y'\ :sub:`33`
-      - Y'\ :sub:`34`
-      - Y'\ :sub:`35`
-      - Y'\ :sub:`36`
-      - Y'\ :sub:`37`
-
-
-**Color Sample Location:**
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      - 1
-      -
-      - 2
-      - 3
-      - 4
-      - 5
-      -
-      - 6
-      - 7
-    * - 0
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-    * - 1
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-    * - 2
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-    * - 3
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-y8i.rst b/Documentation/media/uapi/v4l/pixfmt-y8i.rst
deleted file mode 100644
index 2c88ed90522d..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-y8i.rst
+++ /dev/null
@@ -1,73 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Y8I:
-
-*************************
-V4L2_PIX_FMT_Y8I ('Y8I ')
-*************************
-
-
-Interleaved grey-scale image, e.g. from a stereo-pair
-
-
-Description
-===========
-
-This is a grey-scale image with a depth of 8 bits per pixel, but with
-pixels from 2 sources interleaved. Each pixel is stored in a 16-bit
-word. E.g. the R200 RealSense camera stores pixel from the left sensor
-in lower and from the right sensor in the higher 8 bits.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00left`
-      - Y'\ :sub:`00right`
-      - Y'\ :sub:`01left`
-      - Y'\ :sub:`01right`
-      - Y'\ :sub:`02left`
-      - Y'\ :sub:`02right`
-      - Y'\ :sub:`03left`
-      - Y'\ :sub:`03right`
-    * - start + 8:
-      - Y'\ :sub:`10left`
-      - Y'\ :sub:`10right`
-      - Y'\ :sub:`11left`
-      - Y'\ :sub:`11right`
-      - Y'\ :sub:`12left`
-      - Y'\ :sub:`12right`
-      - Y'\ :sub:`13left`
-      - Y'\ :sub:`13right`
-    * - start + 16:
-      - Y'\ :sub:`20left`
-      - Y'\ :sub:`20right`
-      - Y'\ :sub:`21left`
-      - Y'\ :sub:`21right`
-      - Y'\ :sub:`22left`
-      - Y'\ :sub:`22right`
-      - Y'\ :sub:`23left`
-      - Y'\ :sub:`23right`
-    * - start + 24:
-      - Y'\ :sub:`30left`
-      - Y'\ :sub:`30right`
-      - Y'\ :sub:`31left`
-      - Y'\ :sub:`31right`
-      - Y'\ :sub:`32left`
-      - Y'\ :sub:`32right`
-      - Y'\ :sub:`33left`
-      - Y'\ :sub:`33right`
diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv410.rst b/Documentation/media/uapi/v4l/pixfmt-yuv410.rst
deleted file mode 100644
index ebb72a5c7ceb..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-yuv410.rst
+++ /dev/null
@@ -1,134 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-YVU410:
-.. _v4l2-pix-fmt-yuv410:
-
-**********************************************************
-V4L2_PIX_FMT_YVU410 ('YVU9'), V4L2_PIX_FMT_YUV410 ('YUV9')
-**********************************************************
-
-
-V4L2_PIX_FMT_YUV410
-Planar formats with ¼ horizontal and vertical chroma resolution, also
-known as YUV 4:1:0
-
-
-Description
-===========
-
-These are planar formats, as opposed to a packed format. The three
-components are separated into three sub-images or planes. The Y plane is
-first. The Y plane has one byte per pixel. For ``V4L2_PIX_FMT_YVU410``,
-the Cr plane immediately follows the Y plane in memory. The Cr plane is
-¼ the width and ¼ the height of the Y plane (and of the image). Each Cr
-belongs to 16 pixels, a four-by-four square of the image. Following the
-Cr plane is the Cb plane, just like the Cr plane.
-``V4L2_PIX_FMT_YUV410`` is the same, except the Cb plane comes first,
-then the Cr plane.
-
-If the Y plane has pad bytes after each row, then the Cr and Cb planes
-have ¼ as many pad bytes after their rows. In other words, four Cx rows
-(including padding) are exactly as long as one Y row (including
-padding).
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * - start + 16:
-      - Cr\ :sub:`00`
-    * - start + 17:
-      - Cb\ :sub:`00`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      -
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
-    * -
-    * - 1
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
-    * -
-      -
-      -
-      -
-      - C
-      -
-      -
-      -
-    * - 2
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
-    * -
-    * - 3
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst b/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst
deleted file mode 100644
index 83ddaa3f8dfb..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst
+++ /dev/null
@@ -1,122 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-YUV411P:
-
-*****************************
-V4L2_PIX_FMT_YUV411P ('411P')
-*****************************
-
-
-Format with ¼ horizontal chroma resolution, also known as YUV 4:1:1.
-Planar layout as opposed to ``V4L2_PIX_FMT_Y41P``
-
-
-Description
-===========
-
-This format is not commonly used. This is a planar format similar to the
-4:2:2 planar format except with half as many chroma. The three
-components are separated into three sub-images or planes. The Y plane is
-first. The Y plane has one byte per pixel. The Cb plane immediately
-follows the Y plane in memory. The Cb plane is ¼ the width of the Y
-plane (and of the image). Each Cb belongs to 4 pixels all on the same
-row. For example, Cb\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`,
-Y'\ :sub:`02` and Y'\ :sub:`03`. Following the Cb plane is the Cr plane,
-just like the Cb plane.
-
-If the Y plane has pad bytes after each row, then the Cr and Cb planes
-have ¼ as many pad bytes after their rows. In other words, four C x rows
-(including padding) is exactly as long as one Y row (including padding).
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * - start + 16:
-      - Cb\ :sub:`00`
-    * - start + 17:
-      - Cb\ :sub:`10`
-    * - start + 18:
-      - Cb\ :sub:`20`
-    * - start + 19:
-      - Cb\ :sub:`30`
-    * - start + 20:
-      - Cr\ :sub:`00`
-    * - start + 21:
-      - Cr\ :sub:`10`
-    * - start + 22:
-      - Cr\ :sub:`20`
-    * - start + 23:
-      - Cr\ :sub:`30`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      - 1
-      -
-      - 2
-      - 3
-    * - 0
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-    * - 1
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-    * - 2
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
-    * - 3
-      - Y
-      - Y
-      - C
-      - Y
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv420.rst b/Documentation/media/uapi/v4l/pixfmt-yuv420.rst
deleted file mode 100644
index f4f6f792a23e..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-yuv420.rst
+++ /dev/null
@@ -1,150 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-YVU420:
-.. _V4L2-PIX-FMT-YUV420:
-
-**********************************************************
-V4L2_PIX_FMT_YVU420 ('YV12'), V4L2_PIX_FMT_YUV420 ('YU12')
-**********************************************************
-
-
-V4L2_PIX_FMT_YUV420
-Planar formats with ½ horizontal and vertical chroma resolution, also
-known as YUV 4:2:0
-
-
-Description
-===========
-
-These are planar formats, as opposed to a packed format. The three
-components are separated into three sub- images or planes. The Y plane
-is first. The Y plane has one byte per pixel. For
-``V4L2_PIX_FMT_YVU420``, the Cr plane immediately follows the Y plane in
-memory. The Cr plane is half the width and half the height of the Y
-plane (and of the image). Each Cr belongs to four pixels, a two-by-two
-square of the image. For example, Cr\ :sub:`0` belongs to Y'\ :sub:`00`,
-Y'\ :sub:`01`, Y'\ :sub:`10`, and Y'\ :sub:`11`. Following the Cr plane
-is the Cb plane, just like the Cr plane. ``V4L2_PIX_FMT_YUV420`` is the
-same except the Cb plane comes first, then the Cr plane.
-
-If the Y plane has pad bytes after each row, then the Cr and Cb planes
-have half as many pad bytes after their rows. In other words, two Cx
-rows (including padding) is exactly as long as one Y row (including
-padding).
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * - start + 16:
-      - Cr\ :sub:`00`
-      - Cr\ :sub:`01`
-    * - start + 18:
-      - Cr\ :sub:`10`
-      - Cr\ :sub:`11`
-    * - start + 20:
-      - Cb\ :sub:`00`
-      - Cb\ :sub:`01`
-    * - start + 22:
-      - Cb\ :sub:`10`
-      - Cb\ :sub:`11`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      -
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      -
-      - C
-      -
-    * - 1
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
-    * -
-    * - 2
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      -
-      - C
-      -
-    * - 3
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst
deleted file mode 100644
index c29b30c6445a..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst
+++ /dev/null
@@ -1,159 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-YUV420M:
-.. _v4l2-pix-fmt-yvu420m:
-
-************************************************************
-V4L2_PIX_FMT_YUV420M ('YM12'), V4L2_PIX_FMT_YVU420M ('YM21')
-************************************************************
-
-
-V4L2_PIX_FMT_YVU420M
-Variation of ``V4L2_PIX_FMT_YUV420`` and ``V4L2_PIX_FMT_YVU420`` with
-planes non contiguous in memory.
-
-
-Description
-===========
-
-This is a multi-planar format, as opposed to a packed format. The three
-components are separated into three sub-images or planes.
-
-The Y plane is first. The Y plane has one byte per pixel. For
-``V4L2_PIX_FMT_YUV420M`` the Cb data constitutes the second plane which
-is half the width and half the height of the Y plane (and of the image).
-Each Cb belongs to four pixels, a two-by-two square of the image. For
-example, Cb\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`,
-Y'\ :sub:`10`, and Y'\ :sub:`11`. The Cr data, just like the Cb plane,
-is in the third plane.
-
-``V4L2_PIX_FMT_YVU420M`` is the same except the Cr data is stored in the
-second plane and the Cb data in the third plane.
-
-If the Y plane has pad bytes after each row, then the Cb and Cr planes
-have half as many pad bytes after their rows. In other words, two Cx
-rows (including padding) is exactly as long as one Y row (including
-padding).
-
-``V4L2_PIX_FMT_YUV420M`` and ``V4L2_PIX_FMT_YVU420M`` are intended to be
-used only in drivers and applications that support the multi-planar API,
-described in :ref:`planar-apis`.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start0 + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start0 + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start0 + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start0 + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * -
-    * - start1 + 0:
-      - Cb\ :sub:`00`
-      - Cb\ :sub:`01`
-    * - start1 + 2:
-      - Cb\ :sub:`10`
-      - Cb\ :sub:`11`
-    * -
-    * - start2 + 0:
-      - Cr\ :sub:`00`
-      - Cr\ :sub:`01`
-    * - start2 + 2:
-      - Cr\ :sub:`10`
-      - Cr\ :sub:`11`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      -
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      -
-      - C
-      -
-    * - 1
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
-    * -
-    * - 2
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
-    * -
-      -
-      - C
-      -
-      -
-      -
-      - C
-      -
-    * - 3
-      - Y
-      -
-      - Y
-      -
-      - Y
-      -
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst
deleted file mode 100644
index 737fd94a9ae9..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst
+++ /dev/null
@@ -1,148 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-YUV422M:
-.. _v4l2-pix-fmt-yvu422m:
-
-************************************************************
-V4L2_PIX_FMT_YUV422M ('YM16'), V4L2_PIX_FMT_YVU422M ('YM61')
-************************************************************
-
-
-V4L2_PIX_FMT_YVU422M
-Planar formats with ½ horizontal resolution, also known as YUV and YVU
-4:2:2
-
-
-Description
-===========
-
-This is a multi-planar format, as opposed to a packed format. The three
-components are separated into three sub-images or planes.
-
-The Y plane is first. The Y plane has one byte per pixel. For
-``V4L2_PIX_FMT_YUV422M`` the Cb data constitutes the second plane which
-is half the width of the Y plane (and of the image). Each Cb belongs to
-two pixels. For example, Cb\ :sub:`0` belongs to Y'\ :sub:`00`,
-Y'\ :sub:`01`. The Cr data, just like the Cb plane, is in the third
-plane.
-
-``V4L2_PIX_FMT_YVU422M`` is the same except the Cr data is stored in the
-second plane and the Cb data in the third plane.
-
-If the Y plane has pad bytes after each row, then the Cb and Cr planes
-have half as many pad bytes after their rows. In other words, two Cx
-rows (including padding) is exactly as long as one Y row (including
-padding).
-
-``V4L2_PIX_FMT_YUV422M`` and ``V4L2_PIX_FMT_YVU422M`` are intended to be
-used only in drivers and applications that support the multi-planar API,
-described in :ref:`planar-apis`.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start0 + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start0 + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start0 + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start0 + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * -
-    * - start1 + 0:
-      - Cb\ :sub:`00`
-      - Cb\ :sub:`01`
-    * - start1 + 2:
-      - Cb\ :sub:`10`
-      - Cb\ :sub:`11`
-    * - start1 + 4:
-      - Cb\ :sub:`20`
-      - Cb\ :sub:`21`
-    * - start1 + 6:
-      - Cb\ :sub:`30`
-      - Cb\ :sub:`31`
-    * -
-    * - start2 + 0:
-      - Cr\ :sub:`00`
-      - Cr\ :sub:`01`
-    * - start2 + 2:
-      - Cr\ :sub:`10`
-      - Cr\ :sub:`11`
-    * - start2 + 4:
-      - Cr\ :sub:`20`
-      - Cr\ :sub:`21`
-    * - start2 + 6:
-      - Cr\ :sub:`30`
-      - Cr\ :sub:`31`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 1
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 2
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 3
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst b/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst
deleted file mode 100644
index 7cebb6ebb621..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst
+++ /dev/null
@@ -1,136 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-YUV422P:
-
-*****************************
-V4L2_PIX_FMT_YUV422P ('422P')
-*****************************
-
-
-Format with ½ horizontal chroma resolution, also known as YUV 4:2:2.
-Planar layout as opposed to ``V4L2_PIX_FMT_YUYV``
-
-
-Description
-===========
-
-This format is not commonly used. This is a planar version of the YUYV
-format. The three components are separated into three sub-images or
-planes. The Y plane is first. The Y plane has one byte per pixel. The Cb
-plane immediately follows the Y plane in memory. The Cb plane is half
-the width of the Y plane (and of the image). Each Cb belongs to two
-pixels. For example, Cb\ :sub:`0` belongs to Y'\ :sub:`00`,
-Y'\ :sub:`01`. Following the Cb plane is the Cr plane, just like the Cb
-plane.
-
-If the Y plane has pad bytes after each row, then the Cr and Cb planes
-have half as many pad bytes after their rows. In other words, two Cx
-rows (including padding) is exactly as long as one Y row (including
-padding).
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * - start + 16:
-      - Cb\ :sub:`00`
-      - Cb\ :sub:`01`
-    * - start + 18:
-      - Cb\ :sub:`10`
-      - Cb\ :sub:`11`
-    * - start + 20:
-      - Cb\ :sub:`20`
-      - Cb\ :sub:`21`
-    * - start + 22:
-      - Cb\ :sub:`30`
-      - Cb\ :sub:`31`
-    * - start + 24:
-      - Cr\ :sub:`00`
-      - Cr\ :sub:`01`
-    * - start + 26:
-      - Cr\ :sub:`10`
-      - Cr\ :sub:`11`
-    * - start + 28:
-      - Cr\ :sub:`20`
-      - Cr\ :sub:`21`
-    * - start + 30:
-      - Cr\ :sub:`30`
-      - Cr\ :sub:`31`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 1
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 2
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 3
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst
deleted file mode 100644
index 8f14ca378816..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst
+++ /dev/null
@@ -1,148 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-YUV444M:
-.. _v4l2-pix-fmt-yvu444m:
-
-************************************************************
-V4L2_PIX_FMT_YUV444M ('YM24'), V4L2_PIX_FMT_YVU444M ('YM42')
-************************************************************
-
-
-V4L2_PIX_FMT_YVU444M
-Planar formats with full horizontal resolution, also known as YUV and
-YVU 4:4:4
-
-
-Description
-===========
-
-This is a multi-planar format, as opposed to a packed format. The three
-components are separated into three sub-images or planes.
-
-The Y plane is first. The Y plane has one byte per pixel. For
-``V4L2_PIX_FMT_YUV444M`` the Cb data constitutes the second plane which
-is the same width and height as the Y plane (and as the image). The Cr
-data, just like the Cb plane, is in the third plane.
-
-``V4L2_PIX_FMT_YVU444M`` is the same except the Cr data is stored in the
-second plane and the Cb data in the third plane.
-
-If the Y plane has pad bytes after each row, then the Cb and Cr planes
-have the same number of pad bytes after their rows.
-
-``V4L2_PIX_FMT_YUV444M`` and ``V4L2_PIX_FMT_YUV444M`` are intended to be
-used only in drivers and applications that support the multi-planar API,
-described in :ref:`planar-apis`.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start0 + 0:
-      - Y'\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Y'\ :sub:`02`
-      - Y'\ :sub:`03`
-    * - start0 + 4:
-      - Y'\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Y'\ :sub:`12`
-      - Y'\ :sub:`13`
-    * - start0 + 8:
-      - Y'\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Y'\ :sub:`22`
-      - Y'\ :sub:`23`
-    * - start0 + 12:
-      - Y'\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Y'\ :sub:`32`
-      - Y'\ :sub:`33`
-    * -
-    * - start1 + 0:
-      - Cb\ :sub:`00`
-      - Cb\ :sub:`01`
-      - Cb\ :sub:`02`
-      - Cb\ :sub:`03`
-    * - start1 + 4:
-      - Cb\ :sub:`10`
-      - Cb\ :sub:`11`
-      - Cb\ :sub:`12`
-      - Cb\ :sub:`13`
-    * - start1 + 8:
-      - Cb\ :sub:`20`
-      - Cb\ :sub:`21`
-      - Cb\ :sub:`22`
-      - Cb\ :sub:`23`
-    * - start1 + 12:
-      - Cb\ :sub:`20`
-      - Cb\ :sub:`21`
-      - Cb\ :sub:`32`
-      - Cb\ :sub:`33`
-    * -
-    * - start2 + 0:
-      - Cr\ :sub:`00`
-      - Cr\ :sub:`01`
-      - Cr\ :sub:`02`
-      - Cr\ :sub:`03`
-    * - start2 + 4:
-      - Cr\ :sub:`10`
-      - Cr\ :sub:`11`
-      - Cr\ :sub:`12`
-      - Cr\ :sub:`13`
-    * - start2 + 8:
-      - Cr\ :sub:`20`
-      - Cr\ :sub:`21`
-      - Cr\ :sub:`22`
-      - Cr\ :sub:`23`
-    * - start2 + 12:
-      - Cr\ :sub:`30`
-      - Cr\ :sub:`31`
-      - Cr\ :sub:`32`
-      - Cr\ :sub:`33`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      - 1
-      - 2
-      - 3
-    * - 0
-      - YC
-      - YC
-      - YC
-      - YC
-    * - 1
-      - YC
-      - YC
-      - YC
-      - YC
-    * - 2
-      - YC
-      - YC
-      - YC
-      - YC
-    * - 3
-      - YC
-      - YC
-      - YC
-      - YC
diff --git a/Documentation/media/uapi/v4l/pixfmt-yuyv.rst b/Documentation/media/uapi/v4l/pixfmt-yuyv.rst
deleted file mode 100644
index d86d7f086c41..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-yuyv.rst
+++ /dev/null
@@ -1,125 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-YUYV:
-
-**************************
-V4L2_PIX_FMT_YUYV ('YUYV')
-**************************
-
-
-Packed format with ½ horizontal chroma resolution, also known as YUV
-4:2:2
-
-
-Description
-===========
-
-In this format each four bytes is two pixels. Each four bytes is two
-Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr
-belong to both pixels. As you can see, the Cr and Cb components have
-half the horizontal resolution of the Y component. ``V4L2_PIX_FMT_YUYV``
-is known in the Windows environment as YUY2.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Cb\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Cr\ :sub:`00`
-      - Y'\ :sub:`02`
-      - Cb\ :sub:`01`
-      - Y'\ :sub:`03`
-      - Cr\ :sub:`01`
-    * - start + 8:
-      - Y'\ :sub:`10`
-      - Cb\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Cr\ :sub:`10`
-      - Y'\ :sub:`12`
-      - Cb\ :sub:`11`
-      - Y'\ :sub:`13`
-      - Cr\ :sub:`11`
-    * - start + 16:
-      - Y'\ :sub:`20`
-      - Cb\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Cr\ :sub:`20`
-      - Y'\ :sub:`22`
-      - Cb\ :sub:`21`
-      - Y'\ :sub:`23`
-      - Cr\ :sub:`21`
-    * - start + 24:
-      - Y'\ :sub:`30`
-      - Cb\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Cr\ :sub:`30`
-      - Y'\ :sub:`32`
-      - Cb\ :sub:`31`
-      - Y'\ :sub:`33`
-      - Cr\ :sub:`31`
-
-
-**Color Sample Location:**
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      -
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      - C
-      - Y
-      -
-      - Y
-      - C
-      - Y
-    * - 1
-      - Y
-      - C
-      - Y
-      -
-      - Y
-      - C
-      - Y
-    * - 2
-      - Y
-      - C
-      - Y
-      -
-      - Y
-      - C
-      - Y
-    * - 3
-      - Y
-      - C
-      - Y
-      -
-      - Y
-      - C
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-yvyu.rst b/Documentation/media/uapi/v4l/pixfmt-yvyu.rst
deleted file mode 100644
index 656a830fed02..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-yvyu.rst
+++ /dev/null
@@ -1,115 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-YVYU:
-
-**************************
-V4L2_PIX_FMT_YVYU ('YVYU')
-**************************
-
-
-Variation of ``V4L2_PIX_FMT_YUYV`` with different order of samples in
-memory
-
-
-Description
-===========
-
-In this format each four bytes is two pixels. Each four bytes is two
-Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr
-belong to both pixels. As you can see, the Cr and Cb components have
-half the horizontal resolution of the Y component.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Y'\ :sub:`00`
-      - Cr\ :sub:`00`
-      - Y'\ :sub:`01`
-      - Cb\ :sub:`00`
-      - Y'\ :sub:`02`
-      - Cr\ :sub:`01`
-      - Y'\ :sub:`03`
-      - Cb\ :sub:`01`
-    * - start + 8:
-      - Y'\ :sub:`10`
-      - Cr\ :sub:`10`
-      - Y'\ :sub:`11`
-      - Cb\ :sub:`10`
-      - Y'\ :sub:`12`
-      - Cr\ :sub:`11`
-      - Y'\ :sub:`13`
-      - Cb\ :sub:`11`
-    * - start + 16:
-      - Y'\ :sub:`20`
-      - Cr\ :sub:`20`
-      - Y'\ :sub:`21`
-      - Cb\ :sub:`20`
-      - Y'\ :sub:`22`
-      - Cr\ :sub:`21`
-      - Y'\ :sub:`23`
-      - Cb\ :sub:`21`
-    * - start + 24:
-      - Y'\ :sub:`30`
-      - Cr\ :sub:`30`
-      - Y'\ :sub:`31`
-      - Cb\ :sub:`30`
-      - Y'\ :sub:`32`
-      - Cr\ :sub:`31`
-      - Y'\ :sub:`33`
-      - Cb\ :sub:`31`
-
-
-**Color Sample Location:**
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * -
-      - 0
-      -
-      - 1
-      - 2
-      -
-      - 3
-    * - 0
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 1
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 2
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
-    * - 3
-      - Y
-      - C
-      - Y
-      - Y
-      - C
-      - Y
diff --git a/Documentation/media/uapi/v4l/pixfmt-z16.rst b/Documentation/media/uapi/v4l/pixfmt-z16.rst
deleted file mode 100644
index eccf235bf02d..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt-z16.rst
+++ /dev/null
@@ -1,73 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _V4L2-PIX-FMT-Z16:
-
-*************************
-V4L2_PIX_FMT_Z16 ('Z16 ')
-*************************
-
-
-16-bit depth data with distance values at each pixel
-
-
-Description
-===========
-
-This is a 16-bit format, representing depth data. Each pixel is a
-distance to the respective point in the image coordinates. Distance unit
-can vary and has to be negotiated with the device separately. Each pixel
-is stored in a 16-bit word in the little endian byte order.
-
-**Byte Order.**
-Each cell is one byte.
-
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - start + 0:
-      - Z\ :sub:`00low`
-      - Z\ :sub:`00high`
-      - Z\ :sub:`01low`
-      - Z\ :sub:`01high`
-      - Z\ :sub:`02low`
-      - Z\ :sub:`02high`
-      - Z\ :sub:`03low`
-      - Z\ :sub:`03high`
-    * - start + 8:
-      - Z\ :sub:`10low`
-      - Z\ :sub:`10high`
-      - Z\ :sub:`11low`
-      - Z\ :sub:`11high`
-      - Z\ :sub:`12low`
-      - Z\ :sub:`12high`
-      - Z\ :sub:`13low`
-      - Z\ :sub:`13high`
-    * - start + 16:
-      - Z\ :sub:`20low`
-      - Z\ :sub:`20high`
-      - Z\ :sub:`21low`
-      - Z\ :sub:`21high`
-      - Z\ :sub:`22low`
-      - Z\ :sub:`22high`
-      - Z\ :sub:`23low`
-      - Z\ :sub:`23high`
-    * - start + 24:
-      - Z\ :sub:`30low`
-      - Z\ :sub:`30high`
-      - Z\ :sub:`31low`
-      - Z\ :sub:`31high`
-      - Z\ :sub:`32low`
-      - Z\ :sub:`32high`
-      - Z\ :sub:`33low`
-      - Z\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt.rst b/Documentation/media/uapi/v4l/pixfmt.rst
deleted file mode 100644
index a7d4cd43a298..000000000000
--- a/Documentation/media/uapi/v4l/pixfmt.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _pixfmt:
-
-#############
-Image Formats
-#############
-The V4L2 API was primarily designed for devices exchanging image data
-with applications. The struct :c:type:`v4l2_pix_format` and
-struct :c:type:`v4l2_pix_format_mplane` structures define the
-format and layout of an image in memory. The former is used with the
-single-planar API, while the latter is used with the multi-planar
-version (see :ref:`planar-apis`). Image formats are negotiated with
-the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. (The explanations here
-focus on video capturing and output, for overlay frame buffer formats
-see also :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`.)
-
-
-.. toctree::
-    :maxdepth: 1
-
-    pixfmt-v4l2
-    pixfmt-v4l2-mplane
-    pixfmt-intro
-    pixfmt-indexed
-    pixfmt-rgb
-    pixfmt-bayer
-    yuv-formats
-    hsv-formats
-    depth-formats
-    pixfmt-compressed
-    sdr-formats
-    tch-formats
-    meta-formats
-    pixfmt-reserved
-    colorspaces
-    colorspaces-defs
-    colorspaces-details
diff --git a/Documentation/media/uapi/v4l/planar-apis.rst b/Documentation/media/uapi/v4l/planar-apis.rst
deleted file mode 100644
index a422dc9d592c..000000000000
--- a/Documentation/media/uapi/v4l/planar-apis.rst
+++ /dev/null
@@ -1,68 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _planar-apis:
-
-*****************************
-Single- and multi-planar APIs
-*****************************
-
-Some devices require data for each input or output video frame to be
-placed in discontiguous memory buffers. In such cases, one video frame
-has to be addressed using more than one memory address, i.e. one pointer
-per "plane". A plane is a sub-buffer of the current frame. For examples
-of such formats see :ref:`pixfmt`.
-
-Initially, V4L2 API did not support multi-planar buffers and a set of
-extensions has been introduced to handle them. Those extensions
-constitute what is being referred to as the "multi-planar API".
-
-Some of the V4L2 API calls and structures are interpreted differently,
-depending on whether single- or multi-planar API is being used. An
-application can choose whether to use one or the other by passing a
-corresponding buffer type to its ioctl calls. Multi-planar versions of
-buffer types are suffixed with an ``_MPLANE`` string. For a list of
-available multi-planar buffer types see enum
-:c:type:`v4l2_buf_type`.
-
-
-Multi-planar formats
-====================
-
-Multi-planar API introduces new multi-planar formats. Those formats use
-a separate set of FourCC codes. It is important to distinguish between
-the multi-planar API and a multi-planar format. Multi-planar API calls
-can handle all single-planar formats as well (as long as they are passed
-in multi-planar API structures), while the single-planar API cannot
-handle multi-planar formats.
-
-
-Calls that distinguish between single and multi-planar APIs
-===========================================================
-
-:ref:`VIDIOC_QUERYCAP <VIDIOC_QUERYCAP>`
-    Two additional multi-planar capabilities are added. They can be set
-    together with non-multi-planar ones for devices that handle both
-    single- and multi-planar formats.
-
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`, :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>`
-    New structures for describing multi-planar formats are added: struct
-    :c:type:`v4l2_pix_format_mplane` and
-    struct :c:type:`v4l2_plane_pix_format`.
-    Drivers may define new multi-planar formats, which have distinct
-    FourCC codes from the existing single-planar ones.
-
-:ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_QUERYBUF <VIDIOC_QUERYBUF>`
-    A new struct :c:type:`v4l2_plane` structure for
-    describing planes is added. Arrays of this structure are passed in
-    the new ``m.planes`` field of struct
-    :c:type:`v4l2_buffer`.
-
-:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`
-    Will allocate multi-planar buffers as requested.
diff --git a/Documentation/media/uapi/v4l/querycap.rst b/Documentation/media/uapi/v4l/querycap.rst
deleted file mode 100644
index 8d01ef52f780..000000000000
--- a/Documentation/media/uapi/v4l/querycap.rst
+++ /dev/null
@@ -1,41 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _querycap:
-
-*********************
-Querying Capabilities
-*********************
-
-Because V4L2 covers a wide variety of devices not all aspects of the API
-are equally applicable to all types of devices. Furthermore devices of
-the same type have different capabilities and this specification permits
-the omission of a few complicated and less important parts of the API.
-
-The :ref:`VIDIOC_QUERYCAP` ioctl is available to
-check if the kernel device is compatible with this specification, and to
-query the :ref:`functions <devices>` and :ref:`I/O methods <io>`
-supported by the device.
-
-Starting with kernel version 3.1, :ref:`VIDIOC_QUERYCAP`
-will return the V4L2 API version used by the driver, with generally
-matches the Kernel version. There's no need of using
-:ref:`VIDIOC_QUERYCAP` to check if a specific ioctl
-is supported, the V4L2 core now returns ``ENOTTY`` if a driver doesn't
-provide support for an ioctl.
-
-Other features can be queried by calling the respective ioctl, for
-example :ref:`VIDIOC_ENUMINPUT` to learn about the
-number, types and names of video connectors on the device. Although
-abstraction is a major objective of this API, the
-:ref:`VIDIOC_QUERYCAP` ioctl also allows driver
-specific applications to reliably identify the driver.
-
-All V4L2 drivers must support :ref:`VIDIOC_QUERYCAP`.
-Applications should always call this ioctl after opening the device.
diff --git a/Documentation/media/uapi/v4l/rw.rst b/Documentation/media/uapi/v4l/rw.rst
deleted file mode 100644
index 6e498fcf32c4..000000000000
--- a/Documentation/media/uapi/v4l/rw.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _rw:
-
-**********
-Read/Write
-**********
-
-Input and output devices support the :ref:`read() <func-read>` and
-:ref:`write() <func-write>` function, respectively, when the
-``V4L2_CAP_READWRITE`` flag in the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl is set.
-
-Drivers may need the CPU to copy the data, but they may also support DMA
-to or from user memory, so this I/O method is not necessarily less
-efficient than other methods merely exchanging buffer pointers. It is
-considered inferior though because no meta-information like frame
-counters or timestamps are passed. This information is necessary to
-recognize frame dropping and to synchronize with other data streams.
-However this is also the simplest I/O method, requiring little or no
-setup to exchange data. It permits command line stunts like this (the
-vidctrl tool is fictitious):
-
-
-.. code-block:: none
-
-    $ vidctrl /dev/video --input=0 --format=YUYV --size=352x288
-    $ dd if=/dev/video of=myimage.422 bs=202752 count=1
-
-To read from the device applications use the :ref:`read() <func-read>`
-function, to write the :ref:`write() <func-write>` function. Drivers
-must implement one I/O method if they exchange data with applications,
-but it need not be this. [#f1]_ When reading or writing is supported, the
-driver must also support the :ref:`select() <func-select>` and
-:ref:`poll() <func-poll>` function. [#f2]_
-
-.. [#f1]
-   It would be desirable if applications could depend on drivers
-   supporting all I/O interfaces, but as much as the complex memory
-   mapping I/O can be inadequate for some devices we have no reason to
-   require this interface, which is most useful for simple applications
-   capturing still images.
-
-.. [#f2]
-   At the driver level :ref:`select() <func-select>` and :ref:`poll() <func-poll>` are
-   the same, and :ref:`select() <func-select>` is too important to be optional.
diff --git a/Documentation/media/uapi/v4l/sdr-formats.rst b/Documentation/media/uapi/v4l/sdr-formats.rst
deleted file mode 100644
index f452f5574ebb..000000000000
--- a/Documentation/media/uapi/v4l/sdr-formats.rst
+++ /dev/null
@@ -1,29 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _sdr-formats:
-
-***********
-SDR Formats
-***********
-
-These formats are used for :ref:`SDR <sdr>` interface only.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    pixfmt-sdr-cu08
-    pixfmt-sdr-cu16le
-    pixfmt-sdr-cs08
-    pixfmt-sdr-cs14le
-    pixfmt-sdr-ru12le
-    pixfmt-sdr-pcu16be
-    pixfmt-sdr-pcu18be
-    pixfmt-sdr-pcu20be
diff --git a/Documentation/media/uapi/v4l/selection-api-configuration.rst b/Documentation/media/uapi/v4l/selection-api-configuration.rst
deleted file mode 100644
index 6e0c98c37067..000000000000
--- a/Documentation/media/uapi/v4l/selection-api-configuration.rst
+++ /dev/null
@@ -1,144 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-*************
-Configuration
-*************
-
-Applications can use the :ref:`selection API <VIDIOC_G_SELECTION>` to
-select an area in a video signal or a buffer, and to query for default
-settings and hardware limits.
-
-Video hardware can have various cropping, composing and scaling
-limitations. It may only scale up or down, support only discrete scaling
-factors, or have different scaling abilities in the horizontal and
-vertical directions. Also it may not support scaling at all. At the same
-time the cropping/composing rectangles may have to be aligned, and both
-the source and the sink may have arbitrary upper and lower size limits.
-Therefore, as usual, drivers are expected to adjust the requested
-parameters and return the actual values selected. An application can
-control the rounding behaviour using
-:ref:`constraint flags <v4l2-selection-flags>`.
-
-
-Configuration of video capture
-==============================
-
-See figure :ref:`sel-targets-capture` for examples of the selection
-targets available for a video capture device. It is recommended to
-configure the cropping targets before to the composing targets.
-
-The range of coordinates of the top left corner, width and height of
-areas that can be sampled is given by the ``V4L2_SEL_TGT_CROP_BOUNDS``
-target. It is recommended for the driver developers to put the top/left
-corner at position ``(0,0)``. The rectangle's coordinates are expressed
-in pixels.
-
-The top left corner, width and height of the source rectangle, that is
-the area actually sampled, is given by the ``V4L2_SEL_TGT_CROP`` target.
-It uses the same coordinate system as ``V4L2_SEL_TGT_CROP_BOUNDS``. The
-active cropping area must lie completely inside the capture boundaries.
-The driver may further adjust the requested size and/or position
-according to hardware limitations.
-
-Each capture device has a default source rectangle, given by the
-``V4L2_SEL_TGT_CROP_DEFAULT`` target. This rectangle shall cover what the
-driver writer considers the complete picture. Drivers shall set the
-active crop rectangle to the default when the driver is first loaded,
-but not later.
-
-The composing targets refer to a memory buffer. The limits of composing
-coordinates are obtained using ``V4L2_SEL_TGT_COMPOSE_BOUNDS``. All
-coordinates are expressed in pixels. The rectangle's top/left corner
-must be located at position ``(0,0)``. The width and height are equal to
-the image size set by :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`.
-
-The part of a buffer into which the image is inserted by the hardware is
-controlled by the ``V4L2_SEL_TGT_COMPOSE`` target. The rectangle's
-coordinates are also expressed in the same coordinate system as the
-bounds rectangle. The composing rectangle must lie completely inside
-bounds rectangle. The driver must adjust the composing rectangle to fit
-to the bounding limits. Moreover, the driver can perform other
-adjustments according to hardware limitations. The application can
-control rounding behaviour using
-:ref:`constraint flags <v4l2-selection-flags>`.
-
-For capture devices the default composing rectangle is queried using
-``V4L2_SEL_TGT_COMPOSE_DEFAULT``. It is usually equal to the bounding
-rectangle.
-
-The part of a buffer that is modified by the hardware is given by
-``V4L2_SEL_TGT_COMPOSE_PADDED``. It contains all pixels defined using
-``V4L2_SEL_TGT_COMPOSE`` plus all padding data modified by hardware
-during insertion process. All pixels outside this rectangle *must not*
-be changed by the hardware. The content of pixels that lie inside the
-padded area but outside active area is undefined. The application can
-use the padded and active rectangles to detect where the rubbish pixels
-are located and remove them if needed.
-
-
-Configuration of video output
-=============================
-
-For output devices targets and ioctls are used similarly to the video
-capture case. The *composing* rectangle refers to the insertion of an
-image into a video signal. The cropping rectangles refer to a memory
-buffer. It is recommended to configure the composing targets before to
-the cropping targets.
-
-The cropping targets refer to the memory buffer that contains an image
-to be inserted into a video signal or graphical screen. The limits of
-cropping coordinates are obtained using ``V4L2_SEL_TGT_CROP_BOUNDS``.
-All coordinates are expressed in pixels. The top/left corner is always
-point ``(0,0)``. The width and height is equal to the image size
-specified using :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
-
-The top left corner, width and height of the source rectangle, that is
-the area from which image date are processed by the hardware, is given
-by the ``V4L2_SEL_TGT_CROP``. Its coordinates are expressed in in the
-same coordinate system as the bounds rectangle. The active cropping area
-must lie completely inside the crop boundaries and the driver may
-further adjust the requested size and/or position according to hardware
-limitations.
-
-For output devices the default cropping rectangle is queried using
-``V4L2_SEL_TGT_CROP_DEFAULT``. It is usually equal to the bounding
-rectangle.
-
-The part of a video signal or graphics display where the image is
-inserted by the hardware is controlled by ``V4L2_SEL_TGT_COMPOSE``
-target. The rectangle's coordinates are expressed in pixels. The
-composing rectangle must lie completely inside the bounds rectangle. The
-driver must adjust the area to fit to the bounding limits. Moreover, the
-driver can perform other adjustments according to hardware limitations.
-
-The device has a default composing rectangle, given by the
-``V4L2_SEL_TGT_COMPOSE_DEFAULT`` target. This rectangle shall cover what
-the driver writer considers the complete picture. It is recommended for
-the driver developers to put the top/left corner at position ``(0,0)``.
-Drivers shall set the active composing rectangle to the default one when
-the driver is first loaded.
-
-The devices may introduce additional content to video signal other than
-an image from memory buffers. It includes borders around an image.
-However, such a padded area is driver-dependent feature not covered by
-this document. Driver developers are encouraged to keep padded rectangle
-equal to active one. The padded target is accessed by the
-``V4L2_SEL_TGT_COMPOSE_PADDED`` identifier. It must contain all pixels
-from the ``V4L2_SEL_TGT_COMPOSE`` target.
-
-
-Scaling control
-===============
-
-An application can detect if scaling is performed by comparing the width
-and the height of rectangles obtained using ``V4L2_SEL_TGT_CROP`` and
-``V4L2_SEL_TGT_COMPOSE`` targets. If these are not equal then the
-scaling is applied. The application can compute the scaling ratios using
-these values.
diff --git a/Documentation/media/uapi/v4l/selection-api-examples.rst b/Documentation/media/uapi/v4l/selection-api-examples.rst
deleted file mode 100644
index bb288b06cc17..000000000000
--- a/Documentation/media/uapi/v4l/selection-api-examples.rst
+++ /dev/null
@@ -1,91 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-********
-Examples
-********
-
-(A video capture device is assumed; change
-``V4L2_BUF_TYPE_VIDEO_CAPTURE`` for other devices; change target to
-``V4L2_SEL_TGT_COMPOSE_*`` family to configure composing area)
-
-Example: Resetting the cropping parameters
-==========================================
-
-.. code-block:: c
-
-	struct v4l2_selection sel = {
-	    .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-	    .target = V4L2_SEL_TGT_CROP_DEFAULT,
-	};
-	ret = ioctl(fd, VIDIOC_G_SELECTION, &sel);
-	if (ret)
-	    exit(-1);
-	sel.target = V4L2_SEL_TGT_CROP;
-	ret = ioctl(fd, VIDIOC_S_SELECTION, &sel);
-	if (ret)
-	    exit(-1);
-
-Setting a composing area on output of size of *at most* half of limit
-placed at a center of a display.
-
-Example: Simple downscaling
-===========================
-
-.. code-block:: c
-
-	struct v4l2_selection sel = {
-	    .type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
-	    .target = V4L2_SEL_TGT_COMPOSE_BOUNDS,
-	};
-	struct v4l2_rect r;
-
-	ret = ioctl(fd, VIDIOC_G_SELECTION, &sel);
-	if (ret)
-	    exit(-1);
-	/* setting smaller compose rectangle */
-	r.width = sel.r.width / 2;
-	r.height = sel.r.height / 2;
-	r.left = sel.r.width / 4;
-	r.top = sel.r.height / 4;
-	sel.r = r;
-	sel.target = V4L2_SEL_TGT_COMPOSE;
-	sel.flags = V4L2_SEL_FLAG_LE;
-	ret = ioctl(fd, VIDIOC_S_SELECTION, &sel);
-	if (ret)
-	    exit(-1);
-
-A video output device is assumed; change ``V4L2_BUF_TYPE_VIDEO_OUTPUT``
-for other devices
-
-Example: Querying for scaling factors
-=====================================
-
-.. code-block:: c
-
-	struct v4l2_selection compose = {
-	    .type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
-	    .target = V4L2_SEL_TGT_COMPOSE,
-	};
-	struct v4l2_selection crop = {
-	    .type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
-	    .target = V4L2_SEL_TGT_CROP,
-	};
-	double hscale, vscale;
-
-	ret = ioctl(fd, VIDIOC_G_SELECTION, &compose);
-	if (ret)
-	    exit(-1);
-	ret = ioctl(fd, VIDIOC_G_SELECTION, &crop);
-	if (ret)
-	    exit(-1);
-
-	/* computing scaling factors */
-	hscale = (double)compose.r.width / crop.r.width;
-	vscale = (double)compose.r.height / crop.r.height;
diff --git a/Documentation/media/uapi/v4l/selection-api-intro.rst b/Documentation/media/uapi/v4l/selection-api-intro.rst
deleted file mode 100644
index 0faed02d0226..000000000000
--- a/Documentation/media/uapi/v4l/selection-api-intro.rst
+++ /dev/null
@@ -1,35 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-************
-Introduction
-************
-
-Some video capture devices can sample a subsection of a picture and
-shrink or enlarge it to an image of arbitrary size. Next, the devices
-can insert the image into larger one. Some video output devices can crop
-part of an input image, scale it up or down and insert it at an
-arbitrary scan line and horizontal offset into a video signal. We call
-these abilities cropping, scaling and composing.
-
-On a video *capture* device the source is a video signal, and the
-cropping target determine the area actually sampled. The sink is an
-image stored in a memory buffer. The composing area specifies which part
-of the buffer is actually written to by the hardware.
-
-On a video *output* device the source is an image in a memory buffer,
-and the cropping target is a part of an image to be shown on a display.
-The sink is the display or the graphics screen. The application may
-select the part of display where the image should be displayed. The size
-and position of such a window is controlled by the compose target.
-
-Rectangles for all cropping and composing targets are defined even if
-the device does supports neither cropping nor composing. Their size and
-position will be fixed in such a case. If the device does not support
-scaling then the cropping and composing rectangles have the same size.
diff --git a/Documentation/media/uapi/v4l/selection-api-targets.rst b/Documentation/media/uapi/v4l/selection-api-targets.rst
deleted file mode 100644
index 83d633bcbd6f..000000000000
--- a/Documentation/media/uapi/v4l/selection-api-targets.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-*****************
-Selection targets
-*****************
-
-
-.. _sel-targets-capture:
-
-.. kernel-figure:: selection.svg
-    :alt:   selection.svg
-    :align: center
-
-    Cropping and composing targets
-
-    Targets used by a cropping, composing and scaling process
-
-
-
-See :ref:`v4l2-selection-targets` for more information.
diff --git a/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst b/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst
deleted file mode 100644
index 79b3abca341a..000000000000
--- a/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst
+++ /dev/null
@@ -1,46 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _selection-vs-crop:
-
-********************************
-Comparison with old cropping API
-********************************
-
-The selection API was introduced to cope with deficiencies of the
-older :ref:`CROP API <crop>`, that was designed to control simple
-capture devices. Later the cropping API was adopted by video output
-drivers. The ioctls are used to select a part of the display were the
-video signal is inserted. It should be considered as an API abuse
-because the described operation is actually the composing. The
-selection API makes a clear distinction between composing and cropping
-operations by setting the appropriate targets.
-
-The CROP API lacks any support for composing to and cropping from an
-image inside a memory buffer. The application could configure a
-capture device to fill only a part of an image by abusing V4L2
-API. Cropping a smaller image from a larger one is achieved by setting
-the field ``bytesperline`` at struct :c:type:`v4l2_pix_format`.
-Introducing an image offsets could be done by modifying field
-``m_userptr`` at struct :c:type:`v4l2_buffer` before calling
-:ref:`VIDIOC_QBUF <VIDIOC_QBUF>`. Those operations should be avoided
-because they are not portable (endianness), and do not work for
-macroblock and Bayer formats and mmap buffers.
-
-The selection API deals with configuration of buffer
-cropping/composing in a clear, intuitive and portable way. Next, with
-the selection API the concepts of the padded target and constraints
-flags are introduced. Finally, struct :c:type:`v4l2_crop` and struct
-:c:type:`v4l2_cropcap` have no reserved fields. Therefore there is no
-way to extend their functionality. The new struct
-:c:type:`v4l2_selection` provides a lot of place for future
-extensions.
-
-Driver developers are encouraged to implement only selection API. The
-former cropping API would be simulated using the new one.
diff --git a/Documentation/media/uapi/v4l/selection-api.rst b/Documentation/media/uapi/v4l/selection-api.rst
deleted file mode 100644
index 5386004e87cf..000000000000
--- a/Documentation/media/uapi/v4l/selection-api.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _selection-api:
-
-Cropping, composing and scaling -- the SELECTION API
-====================================================
-
-
-.. toctree::
-    :maxdepth: 1
-
-    selection-api-intro.rst
-    selection-api-targets.rst
-    selection-api-configuration.rst
-    selection-api-vs-crop-api.rst
-    selection-api-examples.rst
diff --git a/Documentation/media/uapi/v4l/selection.svg b/Documentation/media/uapi/v4l/selection.svg
deleted file mode 100644
index 59d2bec9b278..000000000000
--- a/Documentation/media/uapi/v4l/selection.svg
+++ /dev/null
@@ -1,1178 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-    This file is dual-licensed: you can use it either under the terms
-    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-    dual licensing only applies to this file, and not this project as a
-    whole.
-
-    a) This file is free software; you can redistribute it and/or
-       modify it under the terms of the GNU General Public License as
-       published by the Free Software Foundation version 2 of
-       the License.
-
-       This file is distributed in the hope that it will be useful,
-       but WITHOUT ANY WARRANTY; without even the implied warranty of
-       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-       GNU General Public License for more details.
-
-    Or, alternatively,
-
-    b) Permission is granted to copy, distribute and/or modify this
-       document under the terms of the GNU Free Documentation License,
-       Version 1.1 or any later version published by the Free Software
-       Foundation, with no Invariant Sections, no Front-Cover Texts
-       and no Back-Cover Texts. A copy of the license is included at
-       Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg enable-background="new" version="1" viewBox="0 0 4226.3 1686.8" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
- <defs>
-  <pattern id="ig" xlink:href="#ka" patternTransform="matrix(5.4432 0 0 10.1 1722.4 161.06)"/>
-  <marker id="er" overflow="visible" orient="auto">
-   <path d="m-1.2 0l-1 1 3.5-1-3.5-1 1 1z" fill="#f8d615" fill-rule="evenodd" stroke="#f8d615" stroke-width=".2pt"/>
-  </marker>
-  <pattern id="ka" width="2" height="1" patternTransform="scale(10)" patternUnits="userSpaceOnUse">
-   <path d="M0-.5h1v2H0z" fill="#f815bb"/>
-  </pattern>
-  <filter id="ep" x="-.085" y="-.366" width="1.169" height="1.732">
-   <feGaussianBlur stdDeviation="4.574"/>
-  </filter>
-  <linearGradient id="n">
-   <stop stop-color="#fff" offset="0"/>
-   <stop stop-color="#fff" stop-opacity="0" offset="1"/>
-  </linearGradient>
-  <linearGradient id="j">
-   <stop stop-color="#f9eed3" offset="0"/>
-   <stop stop-opacity="0" offset="1"/>
-  </linearGradient>
-  <linearGradient id="s">
-   <stop stop-color="#283131" stop-opacity="0" offset="0"/>
-   <stop stop-color="#1e2424" offset=".5"/>
-   <stop offset="1"/>
-  </linearGradient>
-  <linearGradient id="u">
-   <stop stop-color="#cfc690" offset="0"/>
-   <stop stop-color="#afa775" offset=".212"/>
-   <stop stop-color="#615c3a" offset=".534"/>
-   <stop offset=".765"/>
-   <stop stop-color="#403518" offset="1"/>
-  </linearGradient>
-  <radialGradient id="jd" cx="418.3" cy="342.48" r="131.45" gradientTransform="matrix(1.3957 .62111 -.42441 .95372 -15.062 -227.97)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#283131" offset="0"/>
-   <stop stop-color="#1e2424" offset=".5"/>
-   <stop offset="1"/>
-  </radialGradient>
-  <filter id="iz" x="-.3" y="-.3" width="1.6" height="1.6">
-   <feGaussianBlur stdDeviation="2"/>
-  </filter>
-  <clipPath id="ea">
-   <path d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 12.61-67.045 3.214-93.929-9.434-26.993-34.967-59.124-66.429-69.643-31.033-10.375-65.018-4.848-84.286 5.714z" fill="#f5ff04" fill-rule="evenodd"/>
-  </clipPath>
-  <radialGradient id="iy" cx="275.44" cy="335.35" r="36.75" gradientTransform="matrix(.05911 2.687 -.72343 .01591 408.73 -424.56)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#fff" offset="0"/>
-   <stop stop-color="#fff" stop-opacity="0" offset="1"/>
-  </radialGradient>
-  <clipPath id="kb">
-   <path d="m265.94 126.68l-18.767 168.86 174.11-73.121 61.954 88.659 57.884-31.99-37.534-180.06-237.64 27.649z" fill-rule="evenodd" stroke="#000" stroke-width=".9"/>
-  </clipPath>
-  <clipPath id="jz">
-   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <clipPath id="kd">
-   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <clipPath id="jx">
-   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <clipPath id="en">
-   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <clipPath id="jw">
-   <path d="M821.64 477.89s22.619-6.507 35.743-5.873c13.123.634 30.642 1.939 43.709 12.186 13.067 10.248 25.068 27.14 34.112 58.37s1.698 99.252-6.176 143.35-28.265 106.11-45 140-49.798 77.495-60.569 89.876c-11.364 13.062-56.206 36.426-79.431 42.267 5.303-10.607 48.9-50.589 35-60.714-14.019-10.212-45.76 45.982-84.293 29.033 21.382-13.132 41.779-51.186 34.041-66.594-7.84-15.61-30.705 48.758-93.536 37.013 30.052-27.527 55.407-70.904 41.263-82.98-14.415-12.307-60.462 54.293-60.462 54.293s-2.822-41.7 13.773-68.607c16.639-26.978 79.653-81.615 99.553-111.7 19.9-30.088 33.613-66.009 42.135-92.518s15.801-77.1 15.801-77.1" enable-background="new" fill="#202020" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <clipPath id="kp">
-   <path d="m366.89 504.13s-29.554 40.573-47.857 74.286-58.621 126.36-70.357 171.07c-11.759 44.803-62.5 123.57-62.5 123.57l76.071 18.214s11.807-12.823 31.071-46.071 60.357-138.57 60.357-138.57l13.214-202.5z" enable-background="accumulate" fill="#0f0f0f" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <clipPath id="eo">
-   <path d="M569.03 1018.8c-4.286.714-27.628 3.618-57.857 10s-99.775 25.962-142.86 35.714-117.26 34.816-156.91 27.265c-39.648-7.55-89.516-64.408-89.516-64.408l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" fill="#0b0b0b" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <filter id="kc" x="-.353" y="-.182" width="1.706" height="1.363">
-   <feGaussianBlur stdDeviation="48.038"/>
-  </filter>
-  <filter id="jb" x="-.611" y="-.149" width="2.223" height="1.299">
-   <feGaussianBlur stdDeviation="37.83"/>
-  </filter>
-  <filter id="eg" x="-.235" y="-.245" width="1.47" height="1.49">
-   <feGaussianBlur stdDeviation="58.328"/>
-  </filter>
-  <filter id="jy" x="-.205" y="-.29" width="1.409" height="1.58">
-   <feGaussianBlur stdDeviation="22.3"/>
-  </filter>
-  <filter id="jv" x="-.344" y="-.184" width="1.688" height="1.369">
-   <feGaussianBlur stdDeviation="34.542"/>
-  </filter>
-  <filter id="kf" x="-.274" y="-.213" width="1.549" height="1.427">
-   <feGaussianBlur stdDeviation="11.314"/>
-  </filter>
-  <filter id="ja" x="-.259" y="-.224" width="1.518" height="1.447">
-   <feGaussianBlur stdDeviation="19.632"/>
-  </filter>
-  <filter id="kq" x="-.325" y="-.19" width="1.651" height="1.38">
-   <feGaussianBlur stdDeviation="28.713"/>
-  </filter>
-  <filter id="ko" x="-.381" y="-.175" width="1.762" height="1.35">
-   <feGaussianBlur stdDeviation="19.304"/>
-  </filter>
-  <filter id="kv" x="-.211" y="-.168" width="1.422" height="1.336">
-   <feGaussianBlur stdDeviation="8.369"/>
-  </filter>
-  <filter id="ks" x="-.187" y="-.236" width="1.374" height="1.473">
-   <feGaussianBlur stdDeviation="31.212"/>
-  </filter>
-  <clipPath id="ju">
-   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <filter id="ki" x="-.252" y="-.053" width="1.503" height="1.106">
-   <feGaussianBlur stdDeviation="13.025"/>
-  </filter>
-  <linearGradient id="t" x1="603.84" x2="616.24" y1="627.85" y2="585.43" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#1a1a1a" offset="0"/>
-   <stop stop-color="#1a1a1a" stop-opacity="0" offset="1"/>
-  </linearGradient>
-  <filter id="dq" x="-.329" y="-.182" width="1.657" height="1.364">
-   <feGaussianBlur stdDeviation="20.913"/>
-  </filter>
-  <filter id="dr" x="-.555" y="-.514" width="2.109" height="2.029">
-   <feGaussianBlur stdDeviation="20.913"/>
-  </filter>
-  <filter id="cy" x="-.326" y="-.845" width="1.653" height="2.691">
-   <feGaussianBlur stdDeviation="21.92"/>
-  </filter>
-  <filter id="he" x="-.409" y="-.715" width="1.818" height="2.431">
-   <feGaussianBlur stdDeviation="21.92"/>
-  </filter>
-  <filter id="o">
-   <feGaussianBlur stdDeviation="8.881"/>
-  </filter>
-  <clipPath id="jt">
-   <path d="M647.61 540.05s22.619-6.507 35.743-5.873c13.123.634 30.642 1.939 43.709 12.186 13.067 10.248 25.068 27.14 34.112 58.37s1.698 99.252-6.176 143.35-28.265 106.11-45 140-49.798 77.495-60.569 89.876c-11.364 13.062-56.206 36.426-79.431 42.267 5.303-10.607 48.9-50.589 35-60.714-14.019-10.212-45.76 45.982-84.293 29.033 21.382-13.132 41.779-51.186 34.041-66.594-7.84-15.61-30.705 48.758-93.536 37.013 30.052-27.527 55.407-70.904 41.263-82.98-14.415-12.307-60.462 54.293-60.462 54.293s-2.822-41.7 13.773-68.607c16.639-26.978 79.653-81.615 99.553-111.7 19.9-30.088 33.613-66.009 42.135-92.518s15.801-77.1 15.801-77.1" enable-background="new" fill="#202020" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="je" x="-.277" y="-.325" width="1.554" height="1.65">
-   <feGaussianBlur stdDeviation="19.956"/>
-  </filter>
-  <clipPath id="e">
-   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <clipPath id="kr">
-   <path d="m366.89 504.13s-29.554 40.573-47.857 74.286-58.621 126.36-70.357 171.07c-11.759 44.803-62.5 123.57-62.5 123.57l76.071 18.214s11.807-12.823 31.071-46.071 60.357-138.57 60.357-138.57l13.214-202.5z" enable-background="accumulate" fill="#0f0f0f" fill-rule="evenodd"/>
-  </clipPath>
-  <clipPath id="am">
-   <path d="M586.13 997.99c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="ds">
-   <feGaussianBlur stdDeviation="10.893"/>
-  </filter>
-  <filter id="bz" x="-.495" y="-.267" width="1.99" height="1.534">
-   <feGaussianBlur stdDeviation="10.731"/>
-  </filter>
-  <filter id="by" x="-.406" y="-.303" width="1.812" height="1.605">
-   <feGaussianBlur stdDeviation="9.859"/>
-  </filter>
-  <clipPath id="cj">
-   <path d="M586.13 997.99c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="il">
-   <feGaussianBlur stdDeviation="3.616"/>
-  </filter>
-  <filter id="ir">
-   <feGaussianBlur stdDeviation="3.864"/>
-  </filter>
-  <clipPath id="ku">
-   <path d="M569.03 1018.8c-4.286.714-27.628 3.618-57.857 10s-57.314 4.966-135.79 17.33c-79.852 12.581-94.064 42.542-108.12 47.064-14.7 4.729-145.38-65.822-145.38-65.822l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" fill="#292929" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <linearGradient id="dt" x1="699.33" x2="698.98" y1="269.77" y2="346.14" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#fff" offset="0"/>
-   <stop offset="1"/>
-  </linearGradient>
-  <mask id="jc" maskUnits="userSpaceOnUse">
-   <ellipse transform="translate(-174.03 62.156)" cx="579.47" cy="260.58" rx="192.69" ry="164.05" enable-background="accumulate" fill="url(#dt)"/>
-  </mask>
-  <clipPath id="is">
-   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303s16.406 45.907 20.334 63.184c3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.977-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.416-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <clipPath id="im">
-   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <filter id="jq" x="-.088" y="-.177" width="1.176" height="1.355">
-   <feGaussianBlur stdDeviation="16.34"/>
-  </filter>
-  <filter id="i">
-   <feTurbulence baseFrequency=".24" numOctaves="10" result="result0" seed="655" type="fractalNoise"/>
-   <feDisplacementMap in="SourceGraphic" in2="result0" scale="62" xChannelSelector="B" yChannelSelector="G"/>
-  </filter>
-  <filter id="em">
-   <feGaussianBlur stdDeviation="2.04"/>
-  </filter>
-  <clipPath id="jo">
-   <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
-  </clipPath>
-  <clipPath id="jp">
-   <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
-  </clipPath>
-  <clipPath id="js">
-   <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
-  </clipPath>
-  <clipPath id="ke">
-   <path d="M178.21 274.15c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="iv" x="-.243" y="-.391" width="1.487" height="1.782">
-   <feGaussianBlur stdDeviation="14.59"/>
-  </filter>
-  <filter id="iu" x="-.146" y="-.235" width="1.292" height="1.47">
-   <feGaussianBlur stdDeviation="4.444"/>
-  </filter>
-  <filter id="it">
-   <feGaussianBlur stdDeviation=".606"/>
-  </filter>
-  <filter id="ix">
-   <feGaussianBlur stdDeviation="6.589"/>
-  </filter>
-  <filter id="iw">
-   <feGaussianBlur stdDeviation="1.505"/>
-  </filter>
-  <filter id="jj" x="-.103" y="-.342" width="1.206" height="1.685">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="jf" x="-.098" y="-.198" width="1.197" height="1.395">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="jh" x="-.098" y="-.198" width="1.196" height="1.397">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="ji" x="-.099" y="-.226" width="1.198" height="1.453">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="hy" x="-.099" y="-.225" width="1.198" height="1.451">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="hu" x="-.105" y="-.405" width="1.209" height="1.809">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="hv" x="-.103" y="-.364" width="1.207" height="1.729">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="hw" x="-.102" y="-.324" width="1.204" height="1.647">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="hx" x="-.101" y="-.274" width="1.201" height="1.548">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="hz" x="-.098" y="-.209" width="1.197" height="1.417">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="ia" x="-.098" y="-.203" width="1.197" height="1.406">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="ib" x="-.098" y="-.198" width="1.196" height="1.397">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="jg">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="jk">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="hr" x="-.031" y="-.103" width="1.062" height="1.205">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hq">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hp">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hn">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hm">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hl">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hk">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hj">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hi">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hh">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hf" x="-.031" y="-.121" width="1.063" height="1.243">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hg" x="-.031" y="-.109" width="1.062" height="1.219">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="hs">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="ho">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="ht">
-   <feGaussianBlur stdDeviation="1.723"/>
-  </filter>
-  <clipPath id="jl">
-   <path transform="translate(.08 -.031)" d="M1111.4-285.94l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.313-.486.21-1.737.584-4.093 1.469-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.594c-1.895.42-1.675.642-2.875.875-1.296.251-1.721-.01-5.437.78-3.49.743-8.895 1.932-10.156 2.688-1.584-.18-3.868-.321-5.844-.03-3.04.446-4.916.672-6.844.905-.655.08-1.04.201-1.344.282-.426.131-.685.26-1.375.343-1.311.16-1.762-.156-5.53.282-3.555.413-9.006 1.272-10.25 1.937-1.6-.297-3.859-.534-5.845-.344-3.058.294-4.972.484-6.906.657-1.934.172-1.688.422-2.906.53-1.316.119-1.76-.163-5.531.25-3.542.39-9.008 1.21-10.281 1.876-1.6-.295-3.887-.507-5.875-.313-3.059.3-4.941.48-6.875.657-.658.06-1.04.178-1.344.25-.428.119-.683.218-1.375.28-1.316.121-1.76-.194-5.531.22-3.556.39-9.006 1.239-10.25
-1.906-1.599-.294-3.86-.524-5.844-.313-3.056.326-4.974.527-6.906.719s-1.69.44-2.906.563c-1.315.131-1.763-.165-5.532.28-3.539.42-8.977 1.293-10.25 1.97-1.597-.281-3.86-.42-5.843-.188-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.128-.685.268-1.375.344-1.314.146-1.768-.174-5.531.313-3.55.458-8.979 1.419-10.22 2.125-1.593-.245-3.833-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.924.258-1.726.493-2.937.656-1.31.176-1.748-.104-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.254-5.813.094-3.026.536-4.899.862-6.812 1.188-.651.11-1.014.27-1.313.375-.42.164-.663.33-1.344.468-1.294.262-1.727-.006-5.437.813-3.499.772-8.846 2.383-10.062 3.219-1.563-.078-3.758.085-5.688.593-2.972.783-4.817 1.232-6.687 1.75s-1.667.768-2.844 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.93.928-4.75 1.459-6.594
-2.063-.626.205-.991.393-1.28.531-.408.214-.654.409-1.313.625-1.255.412-1.687.19-5.282 1.438-3.39 1.177-8.595 3.213-9.78 4.156-1.525.06-3.65.395-5.532 1.062-2.897 1.029-4.699 1.676-6.531 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.47-1.507.107-3.635.498-5.5 1.218a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.594v.03l-8 3.188 1.812 14.72c-.258-.062 6.188 3.312 6.188 3.312.226-.145.449-.273.718-.375 1.08-.41 2.172-.216 6-1.688 3.829-1.471 5.224-2.005 5.907-2.406.68-.4 1.611-.88 2.218-1.531 1.827-.138 3.571-.493 4.938-1 2.968-1.1 4.875-1.806 6.781-2.469 1.906-.662 2.354-1.415 3.406-1.781 1.092-.38 2.195-.166 6.063-1.531 3.867-1.366 5.283-1.827 5.969-2.22.7-.4 1.7-.932 2.312-1.593 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.927-1.622 6.844-2.25 1.539-.504 2.174-1.047 2.906-1.437.23-.135.476-.254.75-.344 1.099-.36 2.182-.082
-6.094-1.313 3.912-1.23 5.366-1.673 6.063-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.635-.267 5.03-.688 3.031-.913 4.993-1.43 6.938-1.968 1.945-.539 2.427-1.265 3.5-1.563 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.735-.33 1.814-.754 2.437-1.375 1.998.116 3.858-.02 5.344-.375 3.078-.735 5.084-1.101 7.063-1.5 1.588-.32 2.244-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.133-.23 2.304.209 6.343-.5 4.04-.709 5.5-.927 6.22-1.187.715-.26 1.704-.568 2.343-1.094 1.924.24 3.748.224 5.188 0 3.126-.488 5.154-.7 7.156-.969 2.001-.268 2.489-.945 3.594-1.094 1.146-.154 2.275.302 6.343-.219 4.068-.52 5.56-.695 6.282-.937.737-.247 1.798-.586 2.437-1.125 2.05.336 3.974.398 5.5.219 3.142-.37 5.18-.56 7.188-.782 1.61-.178 2.264-.608 3.03-.843.242-.086.495-.156.782-.188 1.15-.127 2.301.347 6.375-.125s5.559-.61 6.281-.844c.72-.232 1.7-.473 2.344-.968 1.936.333 3.77.404 5.219.25 3.146-.335
-5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.594-.938 1.151-.115 2.297.366 6.375-.062s5.589-.562 6.313-.781c.739-.224 1.795-.514 2.437-1.031 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.031-.781.241-.081.494-.13.781-.156 1.152-.106 2.293.392 6.375 0s5.59-.531 6.313-.75c.72-.219 1.7-.448 2.343-.938 1.939.35 3.77.454 5.22.313 3.148-.309 5.175-.474 7.187-.657 2.011-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.588-.501 6.312-.719c.74-.222 1.796-.514 2.438-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.177-.523 7.187-.72 1.613-.156 2.266-.63 3.032-.874.24-.088.463-.122.75-.156 1.148-.14 2.316.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.312-1.093 1.92.212 3.72.151 5.157-.094 3.119-.533 5.111-.929 7.093-1.313 1.983-.383 2.475-1.04 3.563-1.28 1.129-.251 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.722-.376 1.762-.87
-2.375-1.531 1.963-.012 3.794-.291 5.219-.844 2.95-1.145 4.873-1.87 6.687-2.75 1.456-.706 2.32-1.702 2.531-2 .213-.298.1-.729.125-.75.043-.035.34-.094.5-.437.86-1.848 2.324-5.628 2.438-6.313.114-.682.168-1.353.219-1.75.029-.23-.147-.879-.125-.937.03-.082.288-.251.343-.5.267-1.199.09-2.208-.125-3.625-.213-1.418-.971-4.615-1.625-5.47-.658-.861-1.224-1.01-1.75-1z" enable-background="new" fill="#bcb786" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="kk" x="-.082" y="-.227" width="1.163" height="1.453">
-   <feGaussianBlur stdDeviation="2.437"/>
-  </filter>
-  <filter id="kj" x="-.041" y="-.113" width="1.082" height="1.227">
-   <feGaussianBlur stdDeviation="1.219"/>
-  </filter>
-  <clipPath id="kl">
-   <path d="M1049.2-282.27l-.09.008c-1.387.884-6.603 1.607-6.629 9.523-.024 7.426 15.013 17.091 17.156 18.094 1.73.81 3.592 1.41 5.406 1.72l1.438.218c1.92.212 3.72.151 5.156-.094 3.12-.532 5.112-.928 7.094-1.312 1.982-.384 2.474-1.04 3.562-1.281 1.129-.251 2.27.116 6.25-.875 3.98-.992 5.43-1.42 6.125-1.782.723-.376 1.762-.87 2.375-1.53 1.963-.013 3.794-.292 5.219-.845 2.951-1.144 4.873-1.869 6.688-2.75 1.455-.706 2.319-1.702 2.53-2 .213-.298.1-.728.126-.75.043-.035.34-.094.5-.437.859-1.847 2.323-5.628 2.437-6.313.114-.682.168-1.352.219-1.75.029-.23-.147-.879-.125-.937.031-.082.288-.25.344-.5.266-1.198.089-2.208-.125-3.625-.214-1.418-.972-4.615-1.625-5.469-.42-.548-.8-.792-1.157-.906-.067-.017-.123-.047-.187-.063-.021-.004-.042.003-.062 0-.312-.075-.609-.158-1.156-.218-.986-.109-2.425-.26-3.969-.25-.515.003-1.037.047-1.563.093-3.558.313-9.01.991-10.218
-1.625-1.634-.334-3.949-.612-5.938-.468-3.064.22-4.968.342-6.906.468-1.939.127-1.686.389-2.906.469-1.32.087-1.787-.223-5.563.094-3.546.297-8.98.993-10.22 1.625-1.632-.335-3.945-.613-5.937-.469-3.064.221-4.967.373-6.906.5-.659.043-1.042.124-1.344.187z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
-  </clipPath>
-  <filter id="km" x="-.022" width="1.044">
-   <feGaussianBlur stdDeviation=".575"/>
-  </filter>
-  <clipPath id="kn">
-   <path d="M205.47-408.97l-.09.002c-1.446.786-6.7 1.143-7.276 9.039-.542 7.405 13.786 18.096 15.854 19.245 1.67.927 3.484 1.655 5.273 2.09l1.419.32c1.9.344 3.7.41 5.15.265 3.149-.314 5.164-.57 7.168-.815 2.004-.245 2.54-.865 3.643-1.03 1.144-.172 2.257.274 6.296-.438s5.515-1.038 6.234-1.35c.747-.325 1.818-.746 2.476-1.362 1.96.124 3.805-.026 5.265-.479 3.024-.936 4.991-1.525 6.863-2.277 1.501-.603 2.432-1.536 2.664-1.819.233-.282.15-.72.177-.74.045-.032.346-.07.53-.4.985-1.784 2.709-5.453 2.87-6.128.162-.673.263-1.338.34-1.73.046-.228-.085-.888-.059-.945.037-.08.305-.23.378-.475.35-1.177.243-2.195.128-3.625-.115-1.429-.648-4.67-1.24-5.568-.38-.577-.742-.846-1.09-.985-.066-.022-.12-.055-.183-.075-.02-.005-.042 0-.063-.004-.305-.097-.596-.2-1.138-.299-.975-.176-2.4-.428-3.942-.526a19.346 19.346 0 0
-0-1.565-.015c-3.572.064-9.057.361-10.307.91-1.606-.448-3.896-.886-5.89-.882-3.072.007-4.98-.005-6.922-.013-1.943-.01-1.71.27-2.932.265-1.322-.005-1.767-.347-5.556-.294-3.558.05-9.028.365-10.307.91-1.606-.448-3.893-.887-5.89-.882-3.072.007-4.982.027-6.924.018-.661-.003-1.049.05-1.354.093z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
-  </clipPath>
-  <linearGradient id="w" x1="774.98" x2="755.12" y1="-211.87" y2="-202.68" gradientTransform="translate(-19.092 4.243)" gradientUnits="userSpaceOnUse" xlink:href="#n"/>
-  <mask id="jm" maskUnits="userSpaceOnUse">
-   <path d="m718.41-224.31l33.25 56 276-24 159.5-48.25-66.5-82.75-402.25 99z" fill="url(#w)" fill-rule="evenodd"/>
-  </mask>
-  <clipPath id="kg">
-   <path d="M734.03 519.49s16.755 37.018 28.701 53.954 52.727 56.046 52.727 56.046l.597-138.59" enable-background="accumulate" fill="#1a1a1a" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <filter id="jn">
-   <feGaussianBlur stdDeviation="10.662"/>
-  </filter>
-  <filter id="ip">
-   <feGaussianBlur stdDeviation="7.18"/>
-  </filter>
-  <clipPath id="iq">
-   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="in">
-   <feGaussianBlur stdDeviation="6.82"/>
-  </filter>
-  <clipPath id="io">
-   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="ij" x="-.144" y="-.103" width="1.288" height="1.206">
-   <feGaussianBlur stdDeviation="7.389"/>
-  </filter>
-  <clipPath id="ik">
-   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="ih" x="-.09" y="-.103" width="1.181" height="1.205">
-   <feGaussianBlur stdDeviation="5.346"/>
-  </filter>
-  <clipPath id="ii">
-   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <clipPath id="gc">
-   <path d="M569.03 1018.8c-4.286.714-27.628 3.618-57.857 10s-99.775 25.962-142.86 35.714-117.26 34.816-156.91 27.265c-39.648-7.55-89.516-64.408-89.516-64.408l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" fill="#0b0b0b" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <filter id="gb" x="-.211" y="-.168" width="1.422" height="1.336">
-   <feGaussianBlur stdDeviation="8.369"/>
-  </filter>
-  <clipPath id="fz">
-   <path d="M205.47-408.97l-.09.002c-1.446.786-6.7 1.143-7.276 9.039-.542 7.405 13.786 18.096 15.854 19.245 1.67.927 3.484 1.655 5.273 2.09l1.419.32c1.9.344 3.7.41 5.15.265 3.149-.314 5.164-.57 7.168-.815 2.004-.245 2.54-.865 3.643-1.03 1.144-.172 2.257.274 6.296-.438s5.515-1.038 6.234-1.35c.747-.325 1.818-.746 2.476-1.362 1.96.124 3.805-.026 5.265-.479 3.024-.936 4.991-1.525 6.863-2.277 1.501-.603 2.432-1.536 2.664-1.819.233-.282.15-.72.177-.74.045-.032.346-.07.53-.4.985-1.784 2.709-5.453 2.87-6.128.162-.673.263-1.338.34-1.73.046-.228-.085-.888-.059-.945.037-.08.305-.23.378-.475.35-1.177.243-2.195.128-3.625-.115-1.429-.648-4.67-1.24-5.568-.38-.577-.742-.846-1.09-.985-.066-.022-.12-.055-.183-.075-.02-.005-.042 0-.063-.004-.305-.097-.596-.2-1.138-.299-.975-.176-2.4-.428-3.942-.526a19.346 19.346 0 0
-0-1.565-.015c-3.572.064-9.057.361-10.307.91-1.606-.448-3.896-.886-5.89-.882-3.072.007-4.98-.005-6.922-.013-1.943-.01-1.71.27-2.932.265-1.322-.005-1.767-.347-5.556-.294-3.558.05-9.028.365-10.307.91-1.606-.448-3.893-.887-5.89-.882-3.072.007-4.982.027-6.924.018-.661-.003-1.049.05-1.354.093z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
-  </clipPath>
-  <filter id="fy" x="-.022" width="1.044">
-   <feGaussianBlur stdDeviation=".575"/>
-  </filter>
-  <clipPath id="fx">
-   <path d="M1049.2-282.27l-.09.008c-1.387.884-6.603 1.607-6.629 9.523-.024 7.426 15.013 17.091 17.156 18.094 1.73.81 3.592 1.41 5.406 1.72l1.438.218c1.92.212 3.72.151 5.156-.094 3.12-.532 5.112-.928 7.094-1.312 1.982-.384 2.474-1.04 3.562-1.281 1.129-.251 2.27.116 6.25-.875 3.98-.992 5.43-1.42 6.125-1.782.723-.376 1.762-.87 2.375-1.53 1.963-.013 3.794-.292 5.219-.845 2.951-1.144 4.873-1.869 6.688-2.75 1.455-.706 2.319-1.702 2.53-2 .213-.298.1-.728.126-.75.043-.035.34-.094.5-.437.859-1.847 2.323-5.628 2.437-6.313.114-.682.168-1.352.219-1.75.029-.23-.147-.879-.125-.937.031-.082.288-.25.344-.5.266-1.198.089-2.208-.125-3.625-.214-1.418-.972-4.615-1.625-5.469-.42-.548-.8-.792-1.157-.906-.067-.017-.123-.047-.187-.063-.021-.004-.042.003-.062 0-.312-.075-.609-.158-1.156-.218-.986-.109-2.425-.26-3.969-.25-.515.003-1.037.047-1.563.093-3.558.313-9.01.991-10.218
-1.625-1.634-.334-3.949-.612-5.938-.468-3.064.22-4.968.342-6.906.468-1.939.127-1.686.389-2.906.469-1.32.087-1.787-.223-5.563.094-3.546.297-8.98.993-10.22 1.625-1.632-.335-3.945-.613-5.937-.469-3.064.221-4.967.373-6.906.5-.659.043-1.042.124-1.344.187z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
-  </clipPath>
-  <filter id="fw" x="-.082" y="-.227" width="1.163" height="1.453">
-   <feGaussianBlur stdDeviation="2.437"/>
-  </filter>
-  <filter id="fv" x="-.041" y="-.113" width="1.082" height="1.227">
-   <feGaussianBlur stdDeviation="1.219"/>
-  </filter>
-  <clipPath id="y">
-   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <filter id="fu" x="-.252" y="-.053" width="1.503" height="1.106">
-   <feGaussianBlur stdDeviation="13.025"/>
-  </filter>
-  <clipPath id="fs">
-   <path d="M734.03 519.49s16.755 37.018 28.701 53.954 52.727 56.046 52.727 56.046l.597-138.59" enable-background="accumulate" fill="#1a1a1a" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <filter id="fr" x="-.274" y="-.213" width="1.549" height="1.427">
-   <feGaussianBlur stdDeviation="11.314"/>
-  </filter>
-  <clipPath id="fq">
-   <path d="M178.21 274.15c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="aq">
-   <feGaussianBlur stdDeviation="2.04"/>
-  </filter>
-  <filter id="g">
-   <feTurbulence baseFrequency=".24" numOctaves="10" result="result0" seed="655" type="fractalNoise"/>
-   <feDisplacementMap in="SourceGraphic" in2="result0" scale="62" xChannelSelector="B" yChannelSelector="G"/>
-  </filter>
-  <clipPath id="fp">
-   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
-  </clipPath>
-  <filter id="fo" x="-.353" y="-.182" width="1.706" height="1.363">
-   <feGaussianBlur stdDeviation="48.038"/>
-  </filter>
-  <clipPath id="fn">
-   <path d="m265.94 126.68l-18.767 168.86 174.11-73.121 61.954 88.659 57.884-31.99-37.534-180.06-237.64 27.649z" fill-rule="evenodd" stroke="#000" stroke-width=".9"/>
-  </clipPath>
-  <filter id="fm" x="-.277" y="-.325" width="1.554" height="1.65">
-   <feGaussianBlur stdDeviation="19.956"/>
-  </filter>
-  <mask id="fk" maskUnits="userSpaceOnUse">
-   <ellipse transform="translate(-174.03 62.156)" cx="579.47" cy="260.58" rx="192.69" ry="164.05" enable-background="accumulate" fill="url(#dt)"/>
-  </mask>
-  <filter id="fj" x="-.611" y="-.149" width="2.223" height="1.299">
-   <feGaussianBlur stdDeviation="37.83"/>
-  </filter>
-  <filter id="fi" x="-.259" y="-.224" width="1.518" height="1.447">
-   <feGaussianBlur stdDeviation="19.632"/>
-  </filter>
-  <filter id="fh" x="-.3" y="-.3" width="1.6" height="1.6">
-   <feGaussianBlur stdDeviation="2"/>
-  </filter>
-  <clipPath id="x">
-   <path d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 12.61-67.045 3.214-93.929-9.434-26.993-34.967-59.124-66.429-69.643-31.033-10.375-65.018-4.848-84.286 5.714z" fill="#f5ff04" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="hd">
-   <feGaussianBlur stdDeviation="6.589"/>
-  </filter>
-  <filter id="hc">
-   <feGaussianBlur stdDeviation="1.505"/>
-  </filter>
-  <filter id="hb" x="-.243" y="-.391" width="1.487" height="1.782">
-   <feGaussianBlur stdDeviation="14.59"/>
-  </filter>
-  <filter id="ha" x="-.146" y="-.235" width="1.292" height="1.47">
-   <feGaussianBlur stdDeviation="4.444"/>
-  </filter>
-  <filter id="gz">
-   <feGaussianBlur stdDeviation=".606"/>
-  </filter>
-  <clipPath id="if">
-   <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
-  </clipPath>
-  <mask id="gy" maskUnits="userSpaceOnUse">
-   <path d="m718.41-224.31l33.25 56 276-24 159.5-48.25-66.5-82.75-402.25 99z" fill="url(#w)" fill-rule="evenodd"/>
-  </mask>
-  <clipPath id="gx">
-   <path transform="translate(.08 -.031)" d="M1111.4-285.94l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.313-.486.21-1.737.584-4.093 1.469-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.594c-1.895.42-1.675.642-2.875.875-1.296.251-1.721-.01-5.437.78-3.49.743-8.895 1.932-10.156 2.688-1.584-.18-3.868-.321-5.844-.03-3.04.446-4.916.672-6.844.905-.655.08-1.04.201-1.344.282-.426.131-.685.26-1.375.343-1.311.16-1.762-.156-5.53.282-3.555.413-9.006 1.272-10.25 1.937-1.6-.297-3.859-.534-5.845-.344-3.058.294-4.972.484-6.906.657-1.934.172-1.688.422-2.906.53-1.316.119-1.76-.163-5.531.25-3.542.39-9.008 1.21-10.281 1.876-1.6-.295-3.887-.507-5.875-.313-3.059.3-4.941.48-6.875.657-.658.06-1.04.178-1.344.25-.428.119-.683.218-1.375.28-1.316.121-1.76-.194-5.531.22-3.556.39-9.006 1.239-10.25
-1.906-1.599-.294-3.86-.524-5.844-.313-3.056.326-4.974.527-6.906.719s-1.69.44-2.906.563c-1.315.131-1.763-.165-5.532.28-3.539.42-8.977 1.293-10.25 1.97-1.597-.281-3.86-.42-5.843-.188-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.128-.685.268-1.375.344-1.314.146-1.768-.174-5.531.313-3.55.458-8.979 1.419-10.22 2.125-1.593-.245-3.833-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.924.258-1.726.493-2.937.656-1.31.176-1.748-.104-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.254-5.813.094-3.026.536-4.899.862-6.812 1.188-.651.11-1.014.27-1.313.375-.42.164-.663.33-1.344.468-1.294.262-1.727-.006-5.437.813-3.499.772-8.846 2.383-10.062 3.219-1.563-.078-3.758.085-5.688.593-2.972.783-4.817 1.232-6.687 1.75s-1.667.768-2.844 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.93.928-4.75 1.459-6.594
-2.063-.626.205-.991.393-1.28.531-.408.214-.654.409-1.313.625-1.255.412-1.687.19-5.282 1.438-3.39 1.177-8.595 3.213-9.78 4.156-1.525.06-3.65.395-5.532 1.062-2.897 1.029-4.699 1.676-6.531 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.47-1.507.107-3.635.498-5.5 1.218a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.594v.03l-8 3.188 1.812 14.72c-.258-.062 6.188 3.312 6.188 3.312.226-.145.449-.273.718-.375 1.08-.41 2.172-.216 6-1.688 3.829-1.471 5.224-2.005 5.907-2.406.68-.4 1.611-.88 2.218-1.531 1.827-.138 3.571-.493 4.938-1 2.968-1.1 4.875-1.806 6.781-2.469 1.906-.662 2.354-1.415 3.406-1.781 1.092-.38 2.195-.166 6.063-1.531 3.867-1.366 5.283-1.827 5.969-2.22.7-.4 1.7-.932 2.312-1.593 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.927-1.622 6.844-2.25 1.539-.504 2.174-1.047 2.906-1.437.23-.135.476-.254.75-.344 1.099-.36 2.182-.082
-6.094-1.313 3.912-1.23 5.366-1.673 6.063-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.635-.267 5.03-.688 3.031-.913 4.993-1.43 6.938-1.968 1.945-.539 2.427-1.265 3.5-1.563 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.735-.33 1.814-.754 2.437-1.375 1.998.116 3.858-.02 5.344-.375 3.078-.735 5.084-1.101 7.063-1.5 1.588-.32 2.244-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.133-.23 2.304.209 6.343-.5 4.04-.709 5.5-.927 6.22-1.187.715-.26 1.704-.568 2.343-1.094 1.924.24 3.748.224 5.188 0 3.126-.488 5.154-.7 7.156-.969 2.001-.268 2.489-.945 3.594-1.094 1.146-.154 2.275.302 6.343-.219 4.068-.52 5.56-.695 6.282-.937.737-.247 1.798-.586 2.437-1.125 2.05.336 3.974.398 5.5.219 3.142-.37 5.18-.56 7.188-.782 1.61-.178 2.264-.608 3.03-.843.242-.086.495-.156.782-.188 1.15-.127 2.301.347 6.375-.125s5.559-.61 6.281-.844c.72-.232 1.7-.473 2.344-.968 1.936.333 3.77.404 5.219.25 3.146-.335
-5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.594-.938 1.151-.115 2.297.366 6.375-.062s5.589-.562 6.313-.781c.739-.224 1.795-.514 2.437-1.031 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.031-.781.241-.081.494-.13.781-.156 1.152-.106 2.293.392 6.375 0s5.59-.531 6.313-.75c.72-.219 1.7-.448 2.343-.938 1.939.35 3.77.454 5.22.313 3.148-.309 5.175-.474 7.187-.657 2.011-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.588-.501 6.312-.719c.74-.222 1.796-.514 2.438-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.177-.523 7.187-.72 1.613-.156 2.266-.63 3.032-.874.24-.088.463-.122.75-.156 1.148-.14 2.316.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.312-1.093 1.92.212 3.72.151 5.157-.094 3.119-.533 5.111-.929 7.093-1.313 1.983-.383 2.475-1.04 3.563-1.28 1.129-.251 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.722-.376 1.762-.87
-2.375-1.531 1.963-.012 3.794-.291 5.219-.844 2.95-1.145 4.873-1.87 6.687-2.75 1.456-.706 2.32-1.702 2.531-2 .213-.298.1-.729.125-.75.043-.035.34-.094.5-.437.86-1.848 2.324-5.628 2.438-6.313.114-.682.168-1.353.219-1.75.029-.23-.147-.879-.125-.937.03-.082.288-.251.343-.5.267-1.199.09-2.208-.125-3.625-.213-1.418-.971-4.615-1.625-5.47-.658-.861-1.224-1.01-1.75-1z" enable-background="new" fill="#bcb786" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="gw">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gv" x="-.103" y="-.342" width="1.206" height="1.685">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gu" x="-.099" y="-.226" width="1.198" height="1.453">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gt" x="-.098" y="-.198" width="1.196" height="1.397">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gs">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gr" x="-.098" y="-.198" width="1.197" height="1.395">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gq" x="-.098" y="-.198" width="1.196" height="1.397">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gp" x="-.098" y="-.203" width="1.197" height="1.406">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="go" x="-.098" y="-.209" width="1.197" height="1.417">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gn" x="-.099" y="-.225" width="1.198" height="1.451">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gm" x="-.101" y="-.274" width="1.201" height="1.548">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gl" x="-.102" y="-.324" width="1.204" height="1.647">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gk" x="-.103" y="-.364" width="1.207" height="1.729">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gj" x="-.105" y="-.405" width="1.209" height="1.809">
-   <feGaussianBlur stdDeviation="1.168"/>
-  </filter>
-  <filter id="gi">
-   <feGaussianBlur stdDeviation="1.723"/>
-  </filter>
-  <filter id="gh">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="gg" x="-.031" y="-.103" width="1.062" height="1.205">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="gf">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="ge">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="ff">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="fe">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="fd">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="fc">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="fb">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="fa">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="ez">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="ey">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="ex" x="-.031" y="-.109" width="1.062" height="1.219">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <filter id="ew" x="-.031" y="-.121" width="1.063" height="1.243">
-   <feGaussianBlur stdDeviation=".35"/>
-  </filter>
-  <clipPath id="ie">
-   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="id">
-   <feGaussianBlur stdDeviation="7.18"/>
-  </filter>
-  <clipPath id="ic">
-   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="gd">
-   <feGaussianBlur stdDeviation="6.82"/>
-  </filter>
-  <clipPath id="ev">
-   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="eu" x="-.144" y="-.103" width="1.288" height="1.206">
-   <feGaussianBlur stdDeviation="7.389"/>
-  </filter>
-  <clipPath id="et">
-   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
-  </clipPath>
-  <filter id="es" x="-.09" y="-.103" width="1.181" height="1.205">
-   <feGaussianBlur stdDeviation="5.346"/>
-  </filter>
-  <marker id="eq" overflow="visible" orient="auto">
-   <path d="m-1.2 0l-1 1 3.5-1-3.5-1 1 1z" fill="#f8d615" fill-rule="evenodd" stroke="#f8d615" stroke-width=".2pt"/>
-  </marker>
-  <radialGradient id="r" cx="142.96" cy="107.09" r="66.982" gradientTransform="matrix(-.33248 .90223 -.95824 -.35312 305.29 19.909)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#1e2323" offset="0"/>
-   <stop stop-color="#181d1d" offset=".56"/>
-   <stop offset="1"/>
-  </radialGradient>
-  <radialGradient id="q" cx="317.79" cy="129.65" r="47.863" gradientTransform="matrix(1.0036 0 0 1.6613 -160.53 -96.205)" gradientUnits="userSpaceOnUse" xlink:href="#u"/>
-  <radialGradient id="p" cx="325.31" cy="80.91" r="26.938" gradientTransform="matrix(2.0748 -.1578 .23824 3.1325 -550.77 -65.729)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#283131" stop-opacity="0" offset="0"/>
-   <stop stop-color="#1e2424" stop-opacity="0" offset=".513"/>
-   <stop offset="1"/>
-  </radialGradient>
-  <linearGradient id="kt" x1="347.9" x2="275.58" y1="1070.2" y2="867.98" gradientUnits="userSpaceOnUse">
-   <stop offset="0"/>
-   <stop offset=".022"/>
-   <stop offset=".759"/>
-   <stop stop-color="#232323" offset=".885"/>
-   <stop stop-color="#595959" offset="1"/>
-  </linearGradient>
-  <linearGradient id="kh" x1="603.84" x2="616.24" y1="627.85" y2="585.43" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse" xlink:href="#t"/>
-  <linearGradient id="el" x1="609.31" x2="560.83" y1="239.47" y2="262.86" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#0a0c0c" offset="0"/>
-   <stop stop-color="#1f2727" stop-opacity="0" offset="1"/>
-  </linearGradient>
-  <radialGradient id="ek" cx="543.67" cy="147.31" r="47.863" gradientTransform="matrix(2.1382 0 0 2.3383 -77.038 -101.69)" gradientUnits="userSpaceOnUse" xlink:href="#u"/>
-  <radialGradient id="ef" cx="385" cy="237.01" r="86.929" gradientTransform="matrix(1 0 0 .8562 0 34.08)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#ada469" offset="0"/>
-   <stop stop-color="#ada469" offset=".811"/>
-   <stop stop-color="#fff" offset="1"/>
-  </radialGradient>
-  <linearGradient id="ee" x1="398.21" x2="379.29" y1="343.52" y2="265.31" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse" xlink:href="#s"/>
-  <radialGradient id="ed" cx="397.16" cy="336.95" r="36.75" gradientTransform="translate(-375.32 -318.42) scale(1.945)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#344040" offset="0"/>
-   <stop stop-color="#222929" offset=".5"/>
-   <stop offset="1"/>
-  </radialGradient>
-  <radialGradient id="ec" cx="402.49" cy="317.24" r="23.714" gradientTransform="translate(-1358.3 -1070.7) scale(4.3777)" gradientUnits="userSpaceOnUse">
-   <stop offset="0"/>
-   <stop stop-color="#1d1d1d" offset="1"/>
-  </radialGradient>
-  <radialGradient id="eb" cx="250.23" cy="475.1" r="95.989" gradientTransform="matrix(1.2259 -.70777 .1414 .24491 322.22 608.92)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#d9e002" offset="0"/>
-   <stop stop-color="#a9ae01" offset=".5"/>
-   <stop stop-color="#717501" offset="1"/>
-  </radialGradient>
-  <radialGradient id="m" cx="228.81" cy="440.27" r="119.18" gradientTransform="matrix(1.1323 .76595 -1.455 2.151 588.75 -711.8)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#ff0" offset="0"/>
-   <stop stop-color="#b2b200" offset="1"/>
-  </radialGradient>
-  <radialGradient id="dz" cx="275.44" cy="335.35" r="36.75" gradientTransform="matrix(.05911 2.687 -.72343 .01591 408.73 -424.56)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#ff0" offset="0"/>
-   <stop stop-color="#ff0" stop-opacity="0" offset="1"/>
-  </radialGradient>
-  <linearGradient id="l" x1="182.35" x2="145.53" y1="256.11" y2="542.21" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#7d7d00" offset="0"/>
-   <stop stop-color="#c6c700" offset=".364"/>
-   <stop stop-color="#f6f800" offset="1"/>
-  </linearGradient>
-  <radialGradient id="dy" cx="296.34" cy="427.18" r="19.704" gradientTransform="translate(-599.29 -827.09) scale(2.9797)" gradientUnits="userSpaceOnUse">
-   <stop stop-opacity="0" offset="0"/>
-   <stop offset="1"/>
-  </radialGradient>
-  <radialGradient id="dx" cx="429.57" cy="377.43" r="72.08" gradientTransform="matrix(1 0 0 .61803 0 144.16)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#e2e2e2" offset="0"/>
-   <stop stop-color="#e2e2e2" stop-opacity="0" offset="1"/>
-  </radialGradient>
-  <radialGradient id="dw" cx="437.7" cy="391.22" r="36.612" gradientTransform="matrix(1 0 0 .61803 0 149.43)" gradientUnits="userSpaceOnUse">
-   <stop stop-color="#c7bd80" offset="0"/>
-   <stop stop-color="#c7bd80" stop-opacity="0" offset="1"/>
-  </radialGradient>
-  <linearGradient id="dv" x1="412.09" x2="417.38" y1="404.92" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
-  <linearGradient id="du" x1="411.91" x2="417.38" y1="404.92" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
-  <linearGradient id="ej" x1="411.91" x2="417.38" y1="405.54" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
-  <linearGradient id="ei" x1="412.09" x2="417.38" y1="405.54" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
-  <linearGradient id="eh" x1="411.73" x2="417.38" y1="405.54" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
-  <linearGradient id="jr" x1="1255.7" x2="893.7" y1="667.09" y2="858.01" gradientUnits="userSpaceOnUse" xlink:href="#n"/>
-  <linearGradient id="ft" x1="603.84" x2="616.24" y1="627.85" y2="585.43" gradientTransform="matrix(1.0057 0 0 2.3995 3424.4 -24.137)" gradientUnits="userSpaceOnUse" xlink:href="#t"/>
-  <radialGradient id="fl" cx="418.3" cy="342.48" r="131.45" gradientTransform="matrix(1.3957 .62111 -.42441 .95372 -15.062 -227.97)" gradientUnits="userSpaceOnUse" xlink:href="#s"/>
-  <radialGradient id="fg" cx="275.44" cy="335.35" r="36.75" gradientTransform="matrix(.05911 2.687 -.72343 .01591 408.73 -424.56)" gradientUnits="userSpaceOnUse" xlink:href="#n"/>
-  <clipPath id="ga">
-   <path d="M3492.3 296.46H3930v902.66h-437.7z" fill="#fff"/>
-  </clipPath>
- </defs>
- <g stroke-miterlimit="1">
-  <path d="M10.45 109.38h1876.7v1563H10.45z" enable-background="new" fill="#a8a8a8" stroke="#000" stroke-width="20.9"/>
-  <path d="M2337.1 111.42h1878.8v1565H2337.1z" enable-background="new" fill="none" stroke="#000" stroke-width="20.925"/>
-  <path d="M2358.4 132.96h1833.4v1522.9H2358.4z" enable-background="new" fill="#a8a8a8" stroke="#f83615" stroke-width="20.391"/>
- </g>
- <g fill-rule="evenodd">
-  <path transform="translate(-2833.5 -4370) scale(10.727)" d="M304.64 526.65c-10 .357-18.214 2.857-18.214 2.857l7.5 6.071 10.357 3.572 16.071.357 22.5-5.357 7.857 1.071 20.357-2.143-10.357 6.786c5.46-1.023 17.393 3.57 9.643 5.357-1.74.402 13.929-4.643 13.929-4.643l2.5-4.642 3.571-9.286h11.43l18.213-4.643 3.572-5-16.071 1.071-12.143 2.143-14.643-5-70.692 16.708-5.38-5.279z" enable-background="new" filter="url(#ep)" opacity=".5"/>
-  <g enable-background="new">
-   <path transform="matrix(.71084 -.19374 .26296 .96481 552.25 332.01)" d="m245.12 100.05s-47.128-31.647-67.215-35.801c-20.038-4.144-38.473-3.318-51.934 13.607s-12.077 61.265-13.536 86.97 2.55 70.177 17.605 88.666c15.055 18.488 45.886 13.585 49.927 21.414 2.213 4.287 65.152-174.86 65.152-174.86z" enable-background="accumulate" fill="url(#r)"/>
-   <path transform="matrix(.71084 -.19374 .26296 .96481 552.25 332.01)" d="M135.38 82.018s26.344 1.939 37.633 13.903c11.415 12.097 13.735 21.332 15.296 37.735 1.563 16.425-.85 28.418-7.814 36.037s-1.004 19.583-25.916 12.071-27.032-27.783-26.515-46.305c.517-18.529 7.316-53.441 7.316-53.441z" enable-background="accumulate" fill="url(#q)"/>
-   <path transform="matrix(.71084 -.19374 .26296 .96481 552.25 332.01)" d="M135.65 81.927s-4.645 16.365.588 28.563c5.488 12.793 27.224 44.26 27.224 54.656l22.656-5c2.542-6.966 3.21-15.752 2.188-26.5-1.562-16.403-3.867-25.621-15.281-37.719-9.655-10.232-31.593-13.375-37.375-14z" enable-background="new" fill="url(#p)"/>
-  </g>
-  <path d="m893.6 1350.3c-4.286 0.714-27.628 3.618-57.857 10s-57.314 4.966-135.79 17.33c-79.852 12.581-94.064 42.542-108.12 47.064-14.7 4.729-145.38-65.822-145.38-65.822l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" stroke="#000"/>
-  <path transform="translate(324.57 331.53)" d="m332.34 898.39l-32.732-61.3-37.617 45.106c2.177 1.317 5.774-20.856 45.6-64.417l24.749 80.61z" clip-path="url(#eo)" enable-background="accumulate" fill="#fff" filter="url(#kv)" opacity=".5"/>
-  <path transform="translate(324.57 331.53)" d="m200.82 863.03l146.37-51.619 243.95 226.27-241.83 140.01-181.02-87.681 32.527-226.98z" clip-path="url(#ku)" enable-background="accumulate" fill="url(#kt)" filter="url(#ks)"/>
-  <path d="m691.46 835.66s-29.554 40.573-47.857 74.286-58.621 126.36-70.357 171.07c-11.759 44.803-62.5 123.57-62.5 123.57l76.071 18.214s11.807-12.823 31.071-46.071 60.357-138.57 60.357-138.57l13.214-202.5z" enable-background="accumulate" fill="#0f0f0f"/>
-  <path transform="translate(324.57 331.53)" d="m430.28 381.94c-7.071 2.828-236.18 32.152-236.18 32.152l-39.64 359.83 90.198 92.64 52.326-114.55 100.47-186.39 32.828-183.68z" clip-path="url(#kr)" enable-background="accumulate" fill="#fff" filter="url(#kq)" opacity=".4"/>
-  <path d="m1018.2 1359.5s23.256 11.394 36.068 20.476c12.697 9.001 29.472 24.649 41.692 37.36 12.306 12.8 20.113 22.599 41.533 24.161 21.432 1.563 53.282-8.788 73.296-24.664 20.014-15.877 45.647-69.233 45.647-69.233l-127.16-143.07" enable-background="accumulate" stroke="#000"/>
-  <path transform="translate(324.57 331.53)" d="M331.34 641.5L216.17 835.36l44.042 90.598 97.581-193.75-26.456-90.711z" clip-path="url(#kp)" enable-background="accumulate" filter="url(#ko)" opacity=".75"/>
-  <g enable-background="new">
-   <path d="M1113.913 623.101l-.09-.002c-1.48.72-6.744.842-7.674 8.704-.872 7.373 12.962 18.694 14.976 19.936 1.626 1.001 3.407 1.81 5.174 2.325l1.403.382c1.883.43 3.679.575 5.134.496 3.16-.173 5.184-.339 7.197-.493 2.013-.155 2.577-.75 3.686-.866 1.15-.12 2.242.375 6.309-.155 4.066-.53 5.556-.79 6.288-1.07.76-.29 1.85-.663 2.534-1.25 1.952.213 3.803.145 5.281-.241 3.063-.8 5.055-1.3 6.958-1.968 1.527-.536 2.499-1.426 2.744-1.698.245-.271.181-.712.21-.73.046-.03.348-.055.546-.378 1.065-1.737 2.951-5.325 3.143-5.993.191-.664.322-1.324.417-1.713.056-.225-.045-.89-.017-.946.04-.078.315-.216.399-.457.402-1.16.34-2.183.29-3.616-.05-1.433-.438-4.695-.99-5.618-.353-.593-.703-.88-1.044-1.033-.065-.025-.118-.06-.18-.083-.02-.007-.042-.002-.061-.007-.301-.111-.586-.228-1.124-.35-.966-.22-2.379-.535-3.914-.702a19.278 19.278 0 0
-0-1.563-.085c-3.571-.097-9.064-.045-10.338.446-1.584-.518-3.852-1.06-5.845-1.144-3.069-.13-4.974-.228-6.914-.324-1.94-.095-1.72.194-2.941.134-1.32-.065-1.75-.426-5.537-.543-3.556-.11-9.035-.04-10.338.447-1.584-.52-3.85-1.06-5.845-1.144-3.07-.131-4.978-.197-6.918-.293-.66-.032-1.05.004-1.356.033z" enable-background="new" fill="#bcb786"/>
-   <g transform="rotate(2.568 -22364 20373)" clip-path="url(#kn)" enable-background="new" filter="url(#km)">
-    <path d="M229.94-409.12c-3.558.05-9.024.36-10.303.904-1.606-.447-3.903-.881-5.9-.877a979.03 979.03 0 0 1-6.907 0c-.66-.003-1.048.068-1.353.11v1.096c.12-.18.393-.69.95-.767.747-.103 5.17-.151 7.31-.11 1.775.035 4.455.274 6.39.96.32.113.618.273.891.41 1.964.987 7.944 4.302 7.944 4.302s-6.633-3.948-7.483-4.439c-.203-.117-.575-.258-1.036-.41 1.22-.449 5.076-.62 7.828-.713 3.024-.102 3.348-.09 5.41.192 2.13.29 3.34.602 3.34.602s-.08-.64 1.035-.794c.748-.103 5.17-.152 7.31-.11 2.07.04 5.366.407 7.282 1.37 1.003.504 3.035 1.569 4.795 2.536l.096-.02s-3.58-2.162-4.43-2.653c-.204-.117-.575-.258-1.037-.411 1.22-.448 5.047-.62 7.8-.712 3.024-.102 3.347-.09 5.41.191 1.954.267 3.013.53 3.195.576l-.027-.312a8.503 8.503 0 0 0-1.4-.357c-1.301-.235-3.4-.602-5.51-.564-3.571.064-9.052.356-10.302.904-1.606-.447-3.877-.881-5.871-.877-3.072.007-4.994.01-6.936
-0-1.943-.009-1.713.28-2.936.274-1.322-.005-1.766-.354-5.555-.301M206.2-407.48c1.92.817 4.577 2.193 6.159 3.397s2.908 1.774 5.555 3.918c.885.718 1.748 1.35 2.591 1.922l.541-.19a57.511 57.511 0 0 1-2.269-1.622c-2.822-2.12-3.627-2.81-6.015-4.274s-4.1-2.366-6.562-3.15" enable-background="new"/>
-    <path d="M237.8-407.48c1.92.817 4.606 2.193 6.188 3.397.813.62 1.558 1.07 2.45 1.654l.65-.116a40.414 40.414 0 0 0-2.697-1.784c-2.389-1.465-4.128-2.366-6.59-3.151" enable-background="new"/>
-   </g>
-   <g transform="rotate(6.561 -6814.9 734.73)" clip-path="url(#kl)">
-    <path d="M1056.2-278.8c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#kk)" opacity=".75"/>
-    <path d="M1058.5-275.43c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#kj)" opacity=".75"/>
-   </g>
-  </g>
-  <path d="M676.821 543.52c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.026 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#101414"/>
-  <path transform="translate(324.57 331.53)" d="M311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24-38.612-142.96-39.243-189.12-.631-46.184 10.83-108.61 30.678-158.3 20.048-50.192 36.897-44.846 42.125-92.593s-17.426-149.39-17.426-149.39l-55.86 39.598z" clip-path="url(#en)" enable-background="accumulate" fill="#fff" filter="url(#ki)" opacity=".25"/>
-  <path transform="translate(48.571 195.53)" d="m1010 655.49s16.755 37.018 28.702 53.954c11.946 16.936 52.727 56.046 52.727 56.046l52.597-127.59" enable-background="accumulate" fill="url(#kh)"/>
-  <path transform="translate(324.57 331.53)" d="m730.32 536.57c0 8.485 42.548 58.468 42.548 58.468l12.607-28.77-55.154-29.698z" clip-path="url(#kg)" enable-background="accumulate" fill="#fff" filter="url(#kf)" opacity=".08"/>
- </g>
- <g transform="translate(498.6 269.37)" clip-path="url(#ke)" enable-background="new">
-  <g transform="translate(-174.03 62.156)" filter="url(#em)">
-   <g filter="url(#i)">
-    <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-    <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
-   </g>
-   <g filter="url(#i)">
-    <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-    <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
-   </g>
-  </g>
-  <g enable-background="new" opacity=".18">
-   <g transform="translate(-174.03 62.156)" filter="url(#i)">
-    <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-    <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
-   </g>
-   <g transform="translate(-174.03 62.156)" filter="url(#i)">
-    <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-    <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
-   </g>
-  </g>
- </g>
- <g transform="translate(48.571 195.53)" fill-rule="evenodd">
-  <path transform="translate(276 136)" d="m582.66-7.418l113.14 86.267 108.89 258.8 38.184 207.89 120.21 91.924s-12.728-287.09-19.799-313.96-149.91-393.15-149.91-393.15l-210.72 62.225z" clip-path="url(#kd)" enable-background="accumulate" filter="url(#kc)" opacity=".75"/>
-  <path d="m964.14 239.6s8.677 10.897 24.107 11.964c15.43 1.068 49.722-39.953 70.179-52.143 20.479-12.204 47.046-26.602 63.929-20.357 16.882 6.245 22.158 26.436 27.857 48.036 5.7 21.6 6.719 61.814-2.679 92.857-9.397 31.043-50.502 73.104-65.356 103.39s-11.607 39.821-11.607 39.821" enable-background="accumulate" fill="url(#el)"/>
-  <path d="m1124.5 207.63c-15.893-0.893-49.719 12.106-66.071 24.286-16.439 12.244-29.221 24.114-29.286 52.143-0.065 28.206 13.119 39.076 29.107 46.964s33.686 7.12 51.964-11.786c18.278-18.905 14.286-111.61 14.286-111.61z" enable-background="new" fill="url(#ek)"/>
-  <ellipse transform="matrix(.94347 -.12399 .14401 1.0958 451.95 134.6)" cx="385" cy="237.01" rx="86.429" ry="73.929" clip-path="url(#kb)" enable-background="accumulate" fill="url(#ef)" filter="url(#je)" opacity=".75"/>
-  <path transform="translate(450.03 73.844)" d="m527.61 407.45s-122.04 38.403-187.51 9.632c-65.473-28.772-74.377-124.72-74.377-124.72s73.382-80.504 129.92-83.615c55.827-3.072 90.574 20.143 114.87 65.852 24.352 45.813 17.101 132.85 17.101 132.85z" enable-background="accumulate" fill="url(#jd)" mask="url(#jc)"/>
-  <path d="m772.17 393.35s36.218-27.382 51.607-35.893c15.177-8.393 25.714-11.607 35.893-11.607l-15.536 66.964" enable-background="accumulate" fill="url(#ee)"/>
-  <circle transform="translate(449.5 74.915)" cx="409.29" cy="306.65" r="36.25" enable-background="accumulate" fill="url(#ed)"/>
-  <path transform="translate(276 136)" d="m311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24 8.682-72.368-31.243-223.12l17.678-69.296 72.125-138.59-42.426-158.39-55.86 39.598z" clip-path="url(#en)" enable-background="accumulate" fill="#fff" filter="url(#jb)" opacity=".3"/>
-  <path d="m635.21 581.13c-14.142 12.728 39.233 34.58 76.368 24.042s104.64-35.564 103.24-79.196c-1.407-43.632-76.368-128.69-76.368-128.69l-103.24 183.85z" enable-background="accumulate" filter="url(#ja)" opacity=".5"/>
-  <circle transform="translate(449.67 74.915)" cx="410" cy="306.65" r="23.214" enable-background="accumulate" fill="url(#ec)"/>
-  <circle transform="translate(452 73.487)" cx="414.29" cy="303.08" r="7.5" enable-background="accumulate" fill="#fff" filter="url(#iz)" stroke="#000" stroke-linejoin="bevel"/>
-  <path d="m789.32 478.35s7.023 19.569-1.071 35-42.323 38.988-67.5 50c-25.31 11.07-85.473 32.964-101.79 41.964-16.461 9.082-18.214 12.679-18.214 12.679s-7.147-19.064 28.75-51.786c36.172-32.972 142.03-48.05 159.82-87.857z" enable-background="accumulate" fill="url(#eb)"/>
- </g>
- <g enable-background="new">
-  <g transform="translate(829.32 270.09)" fill-rule="evenodd">
-   <path transform="translate(-329.81)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#ea)" fill="url(#m)"/>
-   <ellipse transform="rotate(28.068 -88.085 -332.1)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#dz)"/>
-   <ellipse transform="rotate(28.068 -43.578 -333.81)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#iy)"/>
-  </g>
-  <path transform="translate(499.51 270.09)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#ea)" enable-background="new" fill="none" filter="url(#ix)" stroke="url(#l)" stroke-width="20.8"/>
- </g>
- <g transform="translate(48.571 195.53)" fill-rule="evenodd">
-  <circle transform="translate(452.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" stroke="#000" stroke-linejoin="bevel"/>
-  <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#m)" filter="url(#iw)" stroke="url(#l)" stroke-width="20.8"/>
-  <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#dy)"/>
-  <ellipse transform="rotate(-4.471 1823.1 -5529.2)" cx="429.57" cy="377.43" rx="72.08" ry="44.548" enable-background="accumulate" fill="url(#dx)" filter="url(#iv)"/>
-  <ellipse transform="matrix(1.4358 -.07 .07 1.4358 235.18 -63.865)" cx="437.7" cy="391.22" rx="36.612" ry="22.627" enable-background="accumulate" fill="url(#dw)" filter="url(#iu)"/>
-  <g transform="translate(450.03 73.844)" enable-background="new" filter="url(#it)">
-   <circle cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#dv)"/>
-   <circle transform="translate(13.125 8.125)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#du)"/>
-   <circle transform="translate(32.946 7.5)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ej)"/>
-   <circle transform="translate(24.911 -10.268)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ei)"/>
-   <circle transform="translate(47.589 -.625)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#eh)"/>
-  </g>
- </g>
- <g fill="none" stroke="#000">
-  <path d="M944.771 678.46c.985 4.35 4.537 6.18 7.387 7.892 4.46 2.513 6.52 1.522 9.154-.758 1.602-1.921 10.683-4.698 15.594-7.07 4.33-1.46 8.904-5.36 13.385-8.335 3.395-1.627 5.347.355 7.829 1.01 2.944.717 4.411 2.172 6.06 3.536 2.397 1.175-.927 3.143 3.284 4.293 1.19.218 2.417.577 3.283-.505" enable-background="new"/>
-  <path d="M959.421 670.88c2.315-.032 3.178.643 5.493-.82 3.455-3.082 5.402-3.146 7.955-4.42 3.026-1.315 6.535 8.152 10.102 9.849 2.395-.822 1.289 1.794 1.452 2.651.057 2.647 2.807 3.679 4.356 5.43 3.316 2.256 7.375 6.296 11.112 5.303 6.445-2.93 10.28-1.281 16.29-7.386.703-1.182-.585-6.895 3.093-7.198 2.524.254 4.166.05 6.06.569 5.442 2.117 7.738 6.45 14.71 7.955 6.184.966 7.613 3.794 13.89 5.05M925.551 679.05c2.399-.794 6.106 4.192 8.173 7.046.593 2.68 1.154 5.486.758 12.122.785 2.417 2.68 3.03 4.798 3.283 3.117-.537 5.877-1.325 7.324-3.03 1.871-1.943 5.312 2.393 8.08 4.04 3.61 1.912 7.775 1.979 11.87 2.273 1.703-.231 2.37 4.515 3.283 8.08.384 4.379-.886 6.896-1.768 9.85-.294 2.496 2.988 3.53 6.313 4.545 3.183.742 6.545 1.662 9.092 1.768 5.142.875 8.088 2.69 12.122 4.04 2.239.817 3.26 2.243 4.545 3.536" enable-background="new"/>
- </g>
- <g fill-rule="evenodd">
-  <path transform="translate(324.57 331.53)" d="m332 187.7s57.5-25.5 57.5-28 5.5-52 5.5-52 91-48.5 91.5-50.5 86-62 86-62l-186 22-75.5 106z" clip-path="url(#jz)" enable-background="new" fill="#fff" filter="url(#jy)" opacity=".25"/>
-  <path d="m1745.9 918.08s-115.97 73.539-123.04 77.782c-7.071 4.243-230.52 137.18-230.52 137.18l4.243 39.598 216.37-100.41 117.38-101.82 15.556-52.326z" enable-background="accumulate" fill="#fff" opacity=".25"/>
-  <path transform="translate(324.57 331.53)" d="m528.92 556.85c-5.657-1.414-181.02 74.953-181.02 74.953l-33.941 181.02 51.095 193.95 257.2 67.681s206.48 152.74 212.13 148.49c5.657-4.243 168.29-193.75 168.29-193.75l-159.81-183.85-46.669-178.19-267.29-110.31z" clip-path="url(#jx)" enable-background="accumulate" filter="url(#eg)" opacity=".5"/>
-  <path d="m1146.2 809.42s22.62-6.507 35.743-5.873 30.642 1.939 43.709 12.186c13.067 10.248 25.068 27.14 34.112 58.37 9.045 31.23 1.698 99.252-6.176 143.35-7.874 44.095-28.265 106.11-45 140-16.735 33.887-49.798 77.495-60.57 89.876-11.363 13.062-56.205 36.426-79.43 42.267 5.303-10.607 48.9-50.589 35-60.714-14.02-10.212-45.76 45.982-84.293 29.033 21.382-13.132 41.779-51.186 34.04-66.594-7.84-15.61-30.704 48.758-93.535 37.013 30.052-27.527 55.407-70.904 41.263-82.98-14.415-12.307-60.462 54.293-60.462 54.293s-2.822-41.7 13.773-68.607c16.639-26.978 79.653-81.615 99.553-111.7 19.9-30.088 33.613-66.009 42.136-92.518s15.8-77.1 15.8-77.1" enable-background="new" fill="#0c0c0c"/>
-  <path transform="translate(324.57 331.53)" d="m770.75 609.18l-50.912 97.581-79.903 111.02 34.648 71.418 42.426 79.196 72.125-45.255 14.142-192.33 21.213-138.59-14.142-90.156-39.598 107.13z" clip-path="url(#jw)" enable-background="accumulate" fill="#fff" filter="url(#jv)" opacity=".25"/>
-  <path transform="translate(324.57 331.53)" d="m295 846.2l6.645-68.923s90.32 89.005 162.36 122.92 308 62 308 62l154-26-36 162-286 26-298-89-11-189z" clip-path="url(#ju)" enable-background="accumulate" filter="url(#eg)"/>
-  <path transform="translate(498.6 269.37)" d="m405.8 845.99l74.953 65.054 2.5 16.88 19.403 10.159 6.492 23.051 31.709-8.371 14.849 48.083c12.257 12.728 89.793-113.11 55.86 38.184l-60.81 16.264-89.203-94.693-62.825-53.8 7.07-60.811z" clip-path="url(#jt)" enable-background="new" fill="#fff" filter="url(#o)"/>
-  <path d="m1207.9 1113.9c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212"/>
-  <path transform="translate(498.6 269.37)" d="m1241.6 652.95s-64.722 54.337-145.66 98.995c-82.024 45.255-284.26 93.338-284.26 93.338s-15.101 21.052 45.255 28.284 224.08-53.301 278.6-96.167 120.21-111.72 120.21-111.72l-14.142-12.728z" clip-path="url(#js)" enable-background="accumulate" fill="url(#jr)" filter="url(#jq)" opacity=".5"/>
- </g>
- <g transform="translate(498.6 269.37)" clip-path="url(#jp)" enable-background="new">
-  <g filter="url(#em)">
-   <g transform="translate(-174.03 62.156)" filter="url(#i)">
-    <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-    <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
-   </g>
-  </g>
-  <g transform="translate(-174.03 62.156)" enable-background="new" filter="url(#i)" opacity=".18">
-   <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-   <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
-  </g>
- </g>
- <path transform="translate(498.6 269.37)" d="M1264.2 605c-4.491.733-8.157 3.455-11.938 6.406-10.081 7.87-28.17 34.425-48.031 50.47-39.867 32.202-104 69.976-152.56 91.093-48.614 21.137-130.54 45.818-174.31 57.5-43.398 11.582-115.04 25.131-168.25 26.531l-4.562.125-2 4.125-92.844 192.12-6.5 13.47 14.656-2.845s87.27-16.65 132.34-31.28c44.725-14.518 115.79-45.668 173.03-72.876 57.603-27.38 166.94-91.98 214.28-129.47 46.36-36.71 77.805-64.717 99.938-90.25 10.9-12.576 22.745-27.53 31.03-42.75 8.287-15.219 19.16-44.218 13.688-58.844-1.218-3.254-2.552-6.06-4.594-8.5s-8.475-1.572-8.563-5.03c-.21-8.266-3.315-.245-4.812 0zm2.156 15.219c.415.586 1.031 1.558 1.782 3.563 2.896 7.742-1.441 31.899-8.813 45.438s-22.638 28.924-33.188 41.094c-21.075 24.314-51.904 51.862-97.938 88.312-45.05 35.672-155.46 101.09-211.41 127.69-56.892 27.042-128.1 58.118-171.25 72.125-36.365 11.803-95.845 23.834-115.72
-27.78l84.281-174.47c54.707-2.049 123.79-15.215 167.12-26.78 44.334-11.832 126.08-36.336 176.41-58.22 50.112-21.788 112.53-61.167 154.03-94.687 20.646-16.677 41.745-42.546 49.813-48.844 2.437-1.903 4.08-2.636 4.875-3z" clip-path="url(#jo)" enable-background="accumulate" fill="#050505" fill-rule="evenodd" filter="url(#jn)" opacity=".833"/>
- <g transform="rotate(6.561 -6814.9 734.74)" enable-background="new" fill-rule="evenodd" mask="url(#jm)">
-  <path d="M1111.48-285.971l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.312-.486.21-1.737.585-4.093 1.47-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.593c-1.894.42-1.675.642-2.875.875-1.296.252-1.721-.009-5.437.782-3.49.742-8.895 1.93-10.156 2.687-1.584-.18-3.868-.322-5.844-.031-3.04.447-4.916.673-6.844.906-.655.08-1.04.2-1.343.281-.427.132-.686.26-1.375.344-1.312.16-1.763-.157-5.532.281-3.554.413-9.005 1.273-10.25 1.938-1.599-.297-3.857-.534-5.843-.344-3.06.293-4.972.484-6.907.656-1.934.173-1.688.423-2.906.532-1.316.117-1.76-.164-5.531.25-3.542.388-9.008 1.209-10.281 1.875-1.6-.295-3.887-.507-5.875-.313-3.058.3-4.941.48-6.875.656-.658.06-1.04.179-1.344.25-.428.12-.683.218-1.375.282-1.316.12-1.76-.195-5.531.218-3.556.39-9.006 1.24-10.25
-1.907-1.599-.295-3.86-.524-5.844-.313-3.056.325-4.974.526-6.906.719s-1.69.44-2.906.562c-1.315.132-1.763-.164-5.532.282-3.538.418-8.977 1.292-10.25 1.968-1.597-.28-3.86-.42-5.843-.187-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.127-.685.267-1.375.344-1.314.146-1.768-.174-5.531.312-3.55.46-8.979 1.42-10.22 2.125-1.592-.244-3.833-.381-5.812-.125-3.047.395-4.95.649-6.875.907-1.924.257-1.726.493-2.937.656-1.31.176-1.748-.105-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.255-5.813.094-3.026.536-4.899.861-6.812 1.187-.65.111-1.014.271-1.313.375-.42.165-.663.332-1.344.469-1.294.262-1.727-.006-5.437.813-3.499.771-8.846 2.382-10.062 3.218-1.563-.077-3.758.086-5.688.594-2.972.783-4.817 1.232-6.687 1.75s-1.667.767-2.844 1.094c-1.272.353-1.697.107-5.344 1.187-3.424 1.015-8.65 2.934-9.875 3.844-1.539.013-3.72.272-5.625.875-2.93.928-4.75 1.459-6.594
-2.063-.626.205-.991.392-1.28.53-.408.215-.654.41-1.313.626-1.255.411-1.686.189-5.281 1.437-3.39 1.178-8.595 3.214-9.782 4.157-1.524.06-3.65.395-5.53 1.062-2.898 1.028-4.7 1.676-6.532 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.469-1.507.108-3.635.499-5.5 1.219a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.593v.031l-8 3.188-12.476 3.492 7.93 19.278c-.592 1.973 12.545-4.739 12.545-4.739.227-.144.45-.272.72-.375 1.08-.41 2.17-.215 6-1.687 3.828-1.472 5.223-2.005 5.905-2.406.68-.4 1.612-.88 2.22-1.531 1.826-.138 3.57-.494 4.937-1 2.968-1.1 4.875-1.807 6.78-2.47 1.907-.662 2.355-1.414 3.407-1.78 1.092-.38 2.195-.166 6.063-1.532 3.867-1.366 5.283-1.827 5.968-2.218.702-.4 1.701-.933 2.313-1.594 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.926-1.622 6.844-2.25 1.538-.504 2.174-1.047 2.906-1.438.23-.134.476-.253.75-.343 1.098-.36
-2.181-.082 6.094-1.313 3.912-1.231 5.366-1.673 6.062-2.031.694-.357 1.63-.793 2.25-1.406 1.866-.023 3.636-.267 5.032-.688 3.03-.913 4.992-1.43 6.937-1.969 1.945-.538 2.426-1.264 3.5-1.562 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.734-.33 1.813-.754 2.437-1.375 1.998.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.245-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.134-.23 2.305.209 6.344-.5 4.04-.71 5.5-.927 6.219-1.188.716-.26 1.704-.567 2.344-1.093 1.924.239 3.748.224 5.187 0 3.127-.488 5.155-.701 7.156-.97 2.002-.267 2.49-.944 3.594-1.093 1.147-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.281-.937.737-.247 1.798-.586 2.438-1.125 2.05.335 3.973.398 5.5.218 3.142-.368 5.18-.559 7.187-.78 1.611-.179 2.265-.609 3.031-.845.241-.085.495-.155.782-.187 1.15-.128 2.301.347 6.375-.125s5.559-.61 6.28-.844c.72-.232 1.701-.473 2.345-.969 1.936.334 3.77.405
-5.219.25 3.146-.334 5.177-.518 7.187-.718 2.01-.2 2.484-.827 3.594-.938 1.15-.115 2.296.365 6.375-.062s5.589-.562 6.312-.782c.74-.223 1.796-.513 2.438-1.03 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.03-.781.242-.081.494-.13.782-.157 1.152-.105 2.293.393 6.375 0s5.589-.53 6.312-.75c.721-.218 1.7-.447 2.344-.937 1.938.35 3.769.454 5.219.312 3.149-.308 5.176-.473 7.187-.656 2.012-.183 2.515-.838 3.625-.937 1.153-.104 2.293.384 6.375 0 4.083-.385 5.59-.501 6.313-.72.74-.222 1.796-.514 2.437-1.03 2.058.401 4.003.503 5.532.343 3.146-.328 5.177-.522 7.187-.718 1.613-.158 2.266-.632 3.031-.875.241-.088.464-.122.75-.157 1.149-.14 2.317.34 6.375-.25 4.059-.59 5.562-.777 6.282-1.03.716-.254 1.674-.559 2.312-1.095 1.92.212 3.72.152 5.156-.093 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.563-1.281 1.128-.25 2.27.116 6.25-.875s5.43-1.42
-6.125-1.781c.722-.376 1.761-.87 2.375-1.531 1.963-.012 3.793-.292 5.218-.844 2.952-1.145 4.874-1.87 6.688-2.75 1.456-.707 2.32-1.702 2.531-2 .212-.298.1-.729.125-.75.043-.035.34-.094.5-.438.86-1.847 2.323-5.627 2.438-6.312.113-.682.168-1.353.218-1.75.03-.23-.147-.88-.125-.938.031-.082.289-.25.344-.5.266-1.198.09-2.207-.125-3.625-.214-1.417-.972-4.614-1.625-5.469-.659-.861-1.225-1.01-1.75-1z" enable-background="new" fill="#bcb786"/>
-  <g clip-path="url(#jl)">
-   <path d="M1107.4-284.05c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
-1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
-2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
-2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
-3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
-1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
-3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#jk)"/>
-   <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#jj)"/>
-   <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#ji)"/>
-   <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#jh)"/>
-   <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25 1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1
-.17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437 1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0
-1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956 5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218
-1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584 5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969
-2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23
-2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219 1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474
-7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
-2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.442 3.94 1.579 5.39.19 2.86-.088 3.468c-.278.609-.944.429-1.237.495.531.186.89.213.953 1.057.058.814-.134 1.64-.52 2.806-.391 1.18-1.845 4.35-2.286 4.599-.452.255-.952.182-1.288.05z" enable-background="new" filter="url(#jg)"/>
-   <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#jf)"/>
-   <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#ib)"/>
-   <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#ia)"/>
-   <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#hz)"/>
-   <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#hy)"/>
-   <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#hx)"/>
-   <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#hw)"/>
-   <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#hv)"/>
-   <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#hu)"/>
-   <g fill="#fff" filter="url(#ht)">
-    <path d="M744.94-212.12s7.222-3.223 9.063-3.5 3.352-.003 6 .563c2.647.565 8.735 2.215 11.188 3.374s5.312 3.563 5.312 3.563-7.146-2.78-10.188-3.563-7.645-2.083-10.375-2.312-11 1.875-11 1.875z"/>
-    <path d="m735.47-206.95s3.66-2.223 5.5-2.5 3.665 0.247 6.313 0.813 8.735 2.215 11.188 3.375 6.562 2.125 6.562 2.125-8.396-1.343-11.438-2.125-7.957-2.334-10.688-2.563-7.438 0.875-7.438 0.875zm24.38-10.66s8.544-3.299 10.398-3.458c1.854-0.16 3.642 0.48 6.248 1.212s8.577 2.766 10.95 4.08 6.414 2.537 6.414 2.537-8.294-1.873-11.279-2.848c-2.985-0.974-7.792-2.834-10.503-3.236s-12.228 1.713-12.228 1.713zm15.35-5.62s7.771-2.782 9.628-2.904c1.857-0.12 3.631 0.555 6.222 1.341 2.59 0.787 8.519 2.942 10.864 4.304 2.346 1.362 6.36 2.67 6.36 2.67s-8.253-2.045-11.217-3.08c-2.965-1.035-7.733-2.995-10.434-3.452-2.702-0.458-11.422 1.121-11.422 1.121zm14.44-4.72s8.683-3.52 10.542-3.605 3.62 0.624 6.195 1.46c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.408 6.307 2.793 6.307 2.793s-8.212-2.204-11.156-3.297-7.673-3.144-10.365-3.654-12.3 1.789-12.3 1.789zm14.86-5.38s7.808-2.583 9.666-2.668c1.86-0.085 3.62
-0.625 6.195 1.461 2.575 0.837 8.46 3.107 10.78 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.213-2.204-11.156-3.296-7.673-3.144-10.365-3.654-11.426 0.85-11.426 0.85zm15.06-4.25s8.558-2.583 10.417-2.668 3.62 0.625 6.195 1.461c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.212-2.204-11.156-3.296-7.673-3.144-10.365-3.654-12.176 0.85-12.176 0.85zm16.67-5.02s6.967-1.987 8.828-1.968c1.86 0.02 3.579 0.827 6.102 1.807 2.524 0.98 8.272 3.578 10.508 5.113 2.236 1.536 6.14 3.143 6.14 3.143s-8.075-2.662-10.952-3.919c-2.878-1.256-7.484-3.57-10.143-4.231-2.66-0.66-10.482 0.055-10.482 0.055zm14.5-3.4s7.688-2.028 9.548-1.968 3.56 0.902 6.063 1.936c2.502 1.033 8.194 3.752 10.397 5.335 2.203 1.582 6.072 3.272 6.072 3.272s-8.017-2.833-10.868-4.15c-2.85-1.318-7.407-3.73-10.05-4.446s-11.162 0.021-11.162 0.021zm14.09-3.21s8.17-1.97 10.027-1.854c1.857 0.115 3.532 1.01 6.002
-2.118s8.077 3.997 10.23 5.645 5.972 3.454 5.972 3.454-7.928-3.074-10.738-4.476-7.291-3.95-9.913-4.746c-2.621-0.796-11.58-0.141-11.58-0.141zm16.56-2.39s8.085-1.908 9.938-1.737c1.853 0.172 3.5 1.117 5.935 2.3 2.436 1.182 7.952 4.24 10.055 5.953s5.864 3.633 5.864 3.633-7.832-3.312-10.597-4.8-7.168-4.169-9.764-5.044c-2.597-0.876-11.431-0.305-11.431-0.305zm15.2-2.75s7.642-1.428 9.495-1.265c1.854 0.162 3.505 1.1 5.946 2.27s7.973 4.203 10.084 5.905c2.112 1.703 5.881 3.605 5.881 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.998-0.77-10.998-0.77zm14.87-1.64s8.642-1.553 10.495-1.39c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.998-0.644-11.998-0.644zm16.25-2.31s7.642-0.865 9.495-0.703c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203 10.084
-5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.862-10.998-1.331-10.998-1.331zm15.13-1.19s8.58-1.49 10.433-1.328c1.854 0.163 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.906c2.111 1.702 5.88 3.605 5.88 3.605s-7.846-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.862-11.935-0.706-11.935-0.706zm16.25-2.06s7.83-0.803 9.683-0.64c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.185-1.394-11.185-1.394zm15.37-1.25s8.392-1.178 10.245-1.015c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-11.748-1.02-11.748-1.02zm16.19-2.06s6.892-0.99 8.745-0.828c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203
-10.084 5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749-7.188-4.135-9.788-4.998c-2.6-0.862-10.248-1.206-10.248-1.206zm17.16-0.94s6.83-1.178 8.683-1.015c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.185-1.02-10.185-1.02zm16.1-2s6.08-0.428 7.933-0.265c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.435-1.77-9.435-1.77zm15.8-1.37s6.454-0.678 8.308-0.515c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.81-1.52-9.81-1.52zm15.6-1.86s5.498-0.91 7.358-0.853c1.86 0.056 3.562 0.896 6.066 1.925
-2.504 1.03 8.2 3.739 10.406 5.318 2.205 1.578 6.078 3.261 6.078 3.261s-8.022-2.819-10.875-4.131c-2.853-1.313-7.413-3.716-10.06-4.429-2.645-0.712-8.973-1.091-8.973-1.091zm17.4-2.46s4.547-1.156 6.408-1.186c1.86-0.03 3.6 0.73 6.149 1.642 2.55 0.912 8.365 3.354 10.64 4.829 2.277 1.474 6.224 2.976 6.224 2.976s-8.145-2.444-11.055-3.623c-2.91-1.178-7.578-3.368-10.253-3.957-2.676-0.588-8.113-0.68-8.113-0.68zm14.5-3.03s5.96-1.774 7.82-1.83c1.86-0.057 3.61 0.68 6.172 1.555 2.562 0.876 2.522 0.857 5.333 1.49 2.797 0.63 7.077 1.513 7.077 1.513s-3.616-0.016-6.792-0.466c-3.116-0.441-7.375-1.698-10.058-2.249-2.684-0.55-9.552-0.013-9.552-0.013z" enable-background="new"/>
-    <path d="M1099.2-279.93c.161.269 11.208-4.6 12.188-4.688.98-.087 2 3.125 2 3.125s-.775-1.504-2.875-1.062-11.301 2.671-11.312 2.625z"/>
-   </g>
-   <path d="M1107.5-284.09c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
-1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
-2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
-2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
-3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
-1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
-3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#hs)" opacity=".25"/>
-   <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#hr)" opacity=".25"/>
-   <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#hq)" opacity=".25"/>
-   <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#hp)" opacity=".25"/>
-   <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25 1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1
-.17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437 1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0
-1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956 5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218
-1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584 5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969
-2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23
-2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219 1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474
-7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
-2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.221 3.85 1.358 5.301.19 2.86-.088 3.469c-.278.608-.723.517-1.016.583.531.186.67.125.732.969.058.813-.134 1.64-.52 2.806-.392 1.18-1.846 4.35-2.286 4.598-.452.256-.731.27-1.067.14z" enable-background="new" filter="url(#ho)" opacity=".25"/>
-   <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#hn)" opacity=".25"/>
-   <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#hm)" opacity=".25"/>
-   <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#hl)" opacity=".25"/>
-   <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#hk)" opacity=".25"/>
-   <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#hj)" opacity=".25"/>
-   <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#hi)" opacity=".25"/>
-   <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#hh)" opacity=".25"/>
-   <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#hg)" opacity=".25"/>
-   <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#hf)" opacity=".25"/>
-  </g>
- </g>
- <path d="M912.45 671.2c1.642-3.218 3.518-5.735 4.861-9.849.8-3.658 3.312-2.03 7.26-8.397 1.403-2.24 5.477.391 8.966-2.399 1.27-.803 2.885-.404 4.483-.063 3.765 1.319 5.825 3.704 8.333 5.808 6.14 5.97 20.534 7.944 23.486 6.314 1.434-2.905 7.882-5.41 12.374-11.112.749-1.123 11.73-8.745 14.647-6.566" enable-background="new" fill="none" stroke="#000"/>
- <path d="M937.07 660.78c7.363-3.233 13.811-8.908 20.708-13.385 3.31-1.97 6.87 3.216 10.796 3.599 2.298-.218 3.713 1.202 5.682 1.641 5.157 1.318 2.398 3.865 9.975 6.44 6.156 1.72 8.908-6.799 14.9-7.324 4.878-.503 8.1-.316 11.617-.252 3.927.139 4.079-3.498 6.061-5.304 2.98-2.805 7.156-1.85 10.145-4.74 1.018-1.385 1.955-3.011 2.735-5.109.882-2 3.04.306 4.798 1.263" enable-background="new" fill="none" stroke="#000"/>
- <g fill-rule="evenodd">
-  <path transform="translate(48.571 195.53)" d="m403.28 1056.3l56.569-42.426 72.125 14.142-46.669 52.326-53.74 7.071-28.284-31.113z" enable-background="accumulate" filter="url(#he)" opacity=".25"/>
-  <path d="m590.84 1256.1c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.977-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.416-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469"/>
-  <path transform="matrix(-.90453 .25066 .25066 .90453 1043.9 219.06)" d="M719.5 738.7l18.312 15.432 44.411-15.388L805.5 713.2l11.464 19.221 30.672 12.784 25.097 5.728L892 723.2l16.023 23.826L947 752.2l10.245-6.198L964 754.7l25.5 11 2-40.5-35.551-14.538-32.493-21.527-40.452-11.466-21.307-15.533L840 685.2l-84.971-46.583-33.03 38.083-2.5 62z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#o)"/>
-  <path transform="matrix(-.90453 .25066 .25066 .90453 870.86 206.47)" d="M584 696.5l-6.563 17.156s-7.811 20.365-15.688 43.656c-3.938 11.646-7.883 24.041-10.938 35.125s-5.335 20.38-5.5 28.281c-.398 19.162 5.747 34.888 8.938 41.75-.772 3.555-1.991 9.454-3.344 18.094-1.92 12.268-3.718 27.154-2.375 39.875 1.382 13.088 6.812 28.188 12.594 43.031s12.054 29.227 15.22 38.031c6.631 18.452 9.992 31.576 11.311 48.5.582 7.456-.242 20.336-1.25 33.375s-2.186 26.301-1.687 36.969c.989 21.14 9.328 46.835 33.375 57.937 22.775 10.515 55.327 11.702 83.438-3.437 16.16-8.704 30.076-27.098 43.375-46.906s24.969-41.053 31.938-54.906c15.353-30.521 39.394-115.46 45.625-152.72 3.018-18.047 3.921-29.066 2.625-38.031-.979-6.766-3.828-12.147-6.875-16.22 2.042-27.507-.732-51.368 11.969-79.405l10.562-23.281-23.812 9.312c-17.49 6.838-28.902 19.045-36.594 32.062-.323.546-.563 1.108-.875 1.656.222-22.515 4.408-37.638
-6.594-58.688l1.968-19-17.03 8.656c-30.595 15.556-45.696 48.193-49.72 90.22-4.245-.626-8.831-1.02-13.812-.844-.291-39.18-.396-67.037 8.594-99.375l5.594-20.125-19.438 7.656c-30.91 12.204-47.86 41.931-56.625 68.375-4.383 13.222-6.746 25.801-7.594 35.938a92.19 92.19 0 0 0-.312 7.719c-3.242-.037-6.42.136-10.062.5.041-39.005-3.485-79.754-32.281-116.5L584 696.498zm5.813 43.812c16.807 30.644 17.475 63.967 16.938 99.75l-.22 15.062 12.036-6.54c8.662-3.132 19.56-.227 31.934-.835l14.675 9.357-6.331-25.794c-.09-.23-.22-.417-.25-.72-.2-2.039-.222-5.472.125-9.624.694-8.304 2.79-19.585 6.625-31.156 5.155-15.553 13.488-31.192 25.125-42.531-4.684 28.638-3.216 60.259-3.012 95.805l-2.766 13.262 15.496-7.598c9.03-2.758 17.19-.35 29.281 1.094l13.246 9.444L741.094 840c1.448-30.972 8.222-53.678 20.719-68.875-2.987 19.779-5.43 41.785.313 78.344l1.065 6.373-2.938 11.517 10.617-8.168 9.19 10.222-1.549-10.464
-3.427-6.95c5.7-13.21 10.173-26.212 16.344-36.655.96-1.624 2.031-3.065 3.062-4.563-3.68 21.155-2.427 40.208-4.093 57.781l-4.68 7.807 7.398.225c3.22 3.483 3.868 3.85 4.563 8.656s.318 14.4-2.563 31.625c-5.568 33.288-31.846 77.84-43.74 101.49-6.605 13.13-18.528 57.486-31.123 76.246s-28.53 39.767-37.172 44.42c-21.49 11.575-44.556 25.507-60.619 18.09-14.375-6.636-23.04-21.192-23.814-37.742-.383-8.188.613-21.31 1.625-34.406 1.013-13.097 11.29-22.571 15.423-36.563 5.373-18.181-1.447-36.594-12.5-53.937-6.486-10.178-23.977-24.258-29.548-38.562s-10.368-29.003-11.28-37.656c-.927-8.771.422-23.025 2.218-34.5 1.796-11.475 3.844-20.281 3.844-20.281l9.423-3.615-10.485-3.885s-8.5-15.31-8.094-34.812c.071-3.423 1.836-12.728 4.719-23.188s6.764-22.553 10.625-33.97c3.044-9.002 5.78-16.602 8.344-23.687z" clip-path="url(#am)" enable-background="new" filter="url(#ds)" opacity=".588"/>
-  <g transform="translate(324.57 331.53)" clip-path="url(#is)" enable-background="new" fill="#fff">
-   <path transform="matrix(-.90453 .25066 .25066 .90453 -52.2 74.097)" d="m-15.668 843.49l-49.497-15.556-26.87 52.326 41.012 45.255 49.497-38.184z" enable-background="accumulate" filter="url(#dr)"/>
-   <path transform="matrix(-.90453 .25066 .25066 .90453 -46.928 75.511)" d="m118.71 859.93l-55.154-46.669-43.841 36.77 33.941 53.74-13.597 85.462-39.445 28.292-41.012 11.314-2.828 46.669 56.569 25.456 18.944-69.65 23.457-58.857 46.348-72.615 16.62-39.912z" enable-background="accumulate" filter="url(#dq)"/>
-  </g>
-  <path transform="matrix(-.90453 .25066 .25066 .90453 277.64 407.04)" d="m-70.822 932.58l60.811-26.87 100.41 31.113-63.64 31.113-82.024-16.971-15.556-18.385z" enable-background="accumulate" filter="url(#cy)" opacity=".25"/>
-  <path transform="matrix(-.90453 .25066 .25066 .90453 870.86 206.47)" d="M583.06 715.75c-12.106 34.45-26.714 68.533-31.75 104.84-.832 14.929 4.59 29.159 8.844 43.062-5.916 27.201-10.137 56.9 1.156 83.125 13.517 38.161 35.001 75.682 32.423 117.47-.948 29.294-9.014 60.994 5.39 88.282 10.199 19.335 33.14 27.312 53.968 27.668 27.862 1.174 56.463-11.622 72-35.261 22.596-29.372 41.802-61.497 55.24-96.06 16.89-45.506 29.672-92.561 37.934-140.4 1.824-12.941 3.1-27.47-4.58-38.823-3.43-7.336.043-15.56-.684-23.31.674-24.995 4.013-50.664 16.653-72.596-17.733 6.445-35.073 16.56-44.003 33.864-3.935 6.71-7.605 13.574-11.372 20.386-3.55-30.014 3.72-59.648 6.781-89.281-20.166 9.055-36.877 25.655-44.175 46.682-6.304 15.58-8.802 32.317-10.263 49.037-8.253-1.52-16.684-2.102-25.062-1.5-.963-38.698-.467-79.407 10.97-115.91-18.682 6.218-35.167 18.736-45.629 35.387-13.853 20.88-21.26 45.754-23.059 70.613.586
-4.325-.06 11.84-6.343 9.875-5.332.018-10.63.679-15.938 1.094 1.147-39.381-3.342-81.628-27.062-114.22-3.061-3.637-5.637-7.685-8.625-11.344l-2.813 7.312zm7.75 13.844c18.565 29.296 22.482 64.82 22.125 98.875.204 5.175-.517 11.829.125 16.062 12.319-6.103 26.739-2.44 39.781-2.187 2.317 1.223 3.192 1.652 1.906-1.407-4.164-13.953-1.848-28.613 1.805-42.408 6.367-26.29 20.628-51.088 42.82-67.03-8.617 37.237-5.716 76.562-6.094 113.97 12.253-6.91 27.28-3.446 40.031-.25 3.393 3.535 2.29-.73 2.188-3.812-.483-21.371 4.131-43.07 13.688-62.156 5.963-10.687 14.243-19.804 22.438-28.875-7.872 33.838-9.203 69.336-2.719 103.5 1.725-1.411 4.607-.454 5.656-.375 9.684-21.237 16.351-45.381 34.89-60.742 1.874-.371-1.448 8.525-1.484 11.898-3.535 21.846-7.175 44.142-8.784 66.219-8.784 2.342 2.849 2.323 3.469 4.062 7.923 10.566 4.663 24.405 3.632 36.353-7.064 45.034-22.142 87.362-35.954 130.68-12.075 32.95-27.374
-58.852-47.888 87.202-10.953 13.551-23.245 27.851-40.844 32.5-20.156 6.242-44.207 10.877-62.6.046-17.29-12.34-21.024-35.709-19.262-55.686.048-15.826 4.938-28.512 4.41-43.492-.538-15.263-2.291-30.565-6.542-46.866-4.252-16.302-9.044-24.918-16.12-41.573-7.24-17.045-15.07-36.749-18.204-56.288-1.75-18.627 2.891-37.123 5.78-55.25 3.297-2.837-1.597-5.196-2.312-8.187-7.6-17.015-8.407-36.775-2.742-54.56 7.13-25.072 15.761-49.632 24.68-74.128l2.125 3.906z" clip-path="url(#cj)" enable-background="new" filter="url(#ir)" opacity=".588"/>
-  <path transform="matrix(-.90453 .25066 .25066 .90453 1043.9 219.06)" d="m735.06 733.04l2.755 21.089 44.411-15.388 4.851-22.39-3.936-22.052-22.452-36.593-8.28 30.305-17.35 45.029z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#bz)"/>
-  <path transform="matrix(-.90453 .25066 .25066 .90453 1043.9 219.06)" d="m831.81 730.29l15.822 14.905 20.855 2.9-1.59-39.926 8.325-30.508-7.165-6.341-21.697 20.942-14.55 38.028z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#by)"/>
- </g>
- <g transform="translate(324.57 331.53)" clip-path="url(#iq)" enable-background="new" filter="url(#ip)">
-  <path d="M36.494 811.806l-14.799 11.372-17.47-31.162 14.663.65 17.606 19.14z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
-  <path d="M-55 757.2h182v177H-55z" enable-background="accumulate" fill="none"/>
- </g>
- <g transform="translate(324.57 331.53)" clip-path="url(#io)" enable-background="new" filter="url(#in)">
-  <path d="m83.111 790.72l-28.201 12.855-5.658-21.687-13.943-25.046 6.325-6.88 26.384 18.51 15.094 22.249z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
-  <path d="M-22 696.2h165v176H-22z" enable-background="accumulate" fill="none"/>
- </g>
- <g fill-rule="evenodd">
-  <path d="m1084.8 1267.3c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656 0.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.973-97.309 13.624-27.084 38.761-114.5 44.661-149.77s2.551-41.3-4.617-49.055c2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933 0.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-0.714-0.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.053 112.78-10.883 0.535-21.371-1.297-32.857 2.857 0.638-42.57-0.26-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57-0.47 22.65 9.452 40.166 9.452 40.166s-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.266 78.658z" enable-background="new" fill="#ada469"/>
-  <path transform="translate(324.57 331.53)" d="M719.5 738.7l18.312 15.432 44.411-15.388L805.5 713.2l11.464 19.221 30.672 12.784 25.097 5.728L892 723.2l16.023 23.826L947 752.2l10.245-6.198L964 754.7l25.5 11 2-40.5-35.551-14.538-32.493-21.527-40.452-11.466-21.307-15.533L840 685.2l-84.971-46.583-33.03 38.083-2.5 62z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#o)"/>
-  <path transform="translate(498.6 269.37)" d="M584 696.5l-6.563 17.156s-7.811 20.365-15.688 43.656c-3.938 11.646-7.883 24.041-10.938 35.125s-5.335 20.38-5.5 28.281c-.398 19.162 5.747 34.888 8.938 41.75-.772 3.555-1.991 9.454-3.344 18.094-1.92 12.268-3.718 27.154-2.375 39.875 1.382 13.088 6.812 28.188 12.594 43.031s12.054 29.227 15.22 38.031c6.631 18.452 9.992 31.576 11.311 48.5.582 7.456-.242 20.336-1.25 33.375s-2.186 26.301-1.687 36.969c.989 21.14 9.328 46.835 33.375 57.937 22.775 10.515 55.327 11.702 83.438-3.437 16.16-8.704 30.076-27.098 43.375-46.906s24.969-41.053 31.938-54.906c15.353-30.521 39.394-115.46 45.625-152.72 3.018-18.047 3.921-29.066 2.625-38.031-.979-6.766-3.828-12.147-6.875-16.22 2.042-27.507-.732-51.368 11.969-79.405l10.562-23.281-23.812 9.312c-17.49 6.838-28.902 19.045-36.594 32.062-.323.546-.563 1.108-.875 1.656.222-22.515 4.408-37.638 6.594-58.688l1.968-19-17.03
-8.656c-30.595 15.556-45.696 48.193-49.72 90.22-4.245-.626-8.831-1.02-13.812-.844-.291-39.18-.396-67.037 8.594-99.375l5.594-20.125-19.438 7.656c-30.91 12.204-47.86 41.931-56.625 68.375-4.383 13.222-6.746 25.801-7.594 35.938a92.19 92.19 0 0 0-.312 7.719c-3.242-.037-6.42.136-10.062.5.041-39.005-3.485-79.754-32.281-116.5L584 696.498zm5.813 43.812c16.807 30.644 17.475 63.967 16.938 99.75l-.22 15.062 12.036-6.54c8.662-3.132 19.56-.227 31.934-.835l14.675 9.357-6.331-25.794c-.09-.23-.22-.417-.25-.72-.2-2.039-.222-5.472.125-9.624.694-8.304 2.79-19.585 6.625-31.156 5.155-15.553 13.488-31.192 25.125-42.531-4.684 28.638-3.216 60.259-3.012 95.805l-2.766 13.262 15.496-7.598c9.03-2.758 17.19-.35 29.281 1.094l13.246 9.444L741.094 840c1.448-30.972 8.222-53.678 20.719-68.875-2.987 19.779-5.43 41.785.313 78.344l1.065 6.373-2.938 11.517 10.617-8.168 9.19 10.222-1.549-10.464 3.427-6.95c5.7-13.21
-10.173-26.212 16.344-36.655.96-1.624 2.031-3.065 3.062-4.563-3.68 21.155-2.427 40.208-4.093 57.781l-4.68 7.807 7.398.225c3.22 3.483 3.868 3.85 4.563 8.656s.318 14.4-2.563 31.625c-5.568 33.288-31.793 123.17-43.688 146.81-6.605 13.13-18.03 33.896-30.625 52.656s-27.359 35.534-36 40.187c-21.49 11.574-48.78 10.26-64.844 2.844-14.375-6.637-20.538-23.45-21.312-40-.383-8.188.613-21.31 1.625-34.406 1.013-13.097 11.29-22.571 15.423-36.563 5.373-18.181-1.447-36.594-12.5-53.937-6.486-10.178-23.977-24.258-29.548-38.562s-10.368-29.003-11.28-37.656c-.927-8.771.422-23.025 2.218-34.5 1.796-11.475 3.844-20.281 3.844-20.281l9.423-3.616-10.485-3.884s-8.5-15.31-8.094-34.812c.071-3.424 1.836-12.728 4.719-23.188s6.764-22.553 10.625-33.97c3.044-9.002 5.78-16.602 8.344-23.687z" clip-path="url(#am)" enable-background="new" filter="url(#ds)" opacity=".588"/>
-  <g transform="translate(324.57 331.53)" clip-path="url(#im)" fill="#fff">
-   <path d="m824.49 818.48l-49.497-15.556-26.87 52.326 41.012 45.255 49.497-38.184z" enable-background="accumulate" filter="url(#dr)"/>
-   <path d="m964.49 855.25l-55.154-46.669-43.841 36.77 33.941 53.74 7.071 66.468-50.912 35.355-41.012 11.314-2.828 46.669 56.569 25.456 63.64-76.368 24.042-94.752 8.485-57.983z" enable-background="accumulate" filter="url(#dq)"/>
-  </g>
-  <path transform="translate(48.571 195.53)" d="m1045.3 1043.6l60.811-26.87 100.41 31.113-63.64 31.113-82.024-16.971-15.556-18.385z" enable-background="accumulate" filter="url(#cy)" opacity=".25"/>
-  <path transform="translate(498.6 269.37)" d="M583.06 715.75c-12.106 34.45-26.714 68.533-31.75 104.84-.832 14.929 4.59 29.159 8.844 43.062-5.916 27.201-10.137 56.9 1.156 83.125 13.517 38.161 35.001 75.682 32.423 117.47-.948 29.294-9.014 60.994 5.39 88.282 10.199 19.335 33.14 27.312 53.968 27.668 27.862 1.174 56.463-11.622 72-35.261 22.596-29.372 41.802-61.497 55.24-96.06 16.89-45.506 29.672-92.561 37.934-140.4 1.824-12.941 3.1-27.47-4.58-38.823-3.43-7.336.043-15.56-.684-23.31.674-24.995 4.013-50.664 16.653-72.596-17.733 6.445-35.073 16.56-44.003 33.864-3.935 6.71-7.605 13.574-11.372 20.386-3.55-30.014 3.72-59.648 6.781-89.281-20.166 9.055-36.877 25.655-44.175 46.682-6.304 15.58-8.802 32.317-10.263 49.037-8.253-1.52-16.684-2.102-25.062-1.5-.963-38.698-.467-79.407 10.97-115.91-18.682 6.218-35.167 18.736-45.629 35.387-13.853 20.88-21.26 45.754-23.059 70.613.586 4.325-.06 11.84-6.343
-9.875-5.332.018-10.63.679-15.938 1.094 1.147-39.381-3.342-81.628-27.062-114.22-3.061-3.637-5.637-7.685-8.625-11.344l-2.813 7.312zm7.75 13.844c18.565 29.296 22.482 64.82 22.125 98.875.204 5.175-.517 11.829.125 16.062 12.319-6.103 26.739-2.44 39.781-2.187 2.317 1.223 3.192 1.652 1.906-1.407-4.164-13.953-1.848-28.613 1.805-42.408 6.367-26.29 20.628-51.088 42.82-67.03-8.617 37.237-5.716 76.562-6.094 113.97 12.253-6.91 27.28-3.446 40.031-.25 3.393 3.535 2.29-.73 2.188-3.812-.483-21.371 4.131-43.07 13.688-62.156 5.963-10.687 14.243-19.804 22.438-28.875-7.872 33.838-9.203 69.336-2.719 103.5 1.725-1.411 4.607-.454 5.656-.375 9.684-21.237 16.351-45.381 34.89-60.742 1.874-.371-1.448 8.525-1.484 11.898-3.535 21.846-3.297 44.173-4.906 66.25-1.312 1.377 2.849 2.323 3.469 4.062 7.923 10.566 3.123 24.831 2.092 36.78-7.064 45.034-21.766 88.38-35.577 131.7-12.075 32.95-30.72 63.08-51.234 91.43-10.953
-13.55-23.245 27.85-40.844 32.5-20.156 6.24-43.576 5.174-61.97-5.657-17.29-12.34-21.023-35.709-19.261-55.686.048-15.826 2.372-27.8 7.917-42.805s2.471-31.332-1.78-47.633-12.18-26.26-21.822-42.204-17.637-36.037-20.772-55.577c-1.75-18.627 2.892-37.123 5.781-55.25 3.296-2.837-1.598-5.196-2.312-8.187-7.602-17.015-8.408-36.775-2.743-54.56 7.13-25.072 15.761-49.632 24.68-74.128l2.125 3.906z" clip-path="url(#cj)" enable-background="new" filter="url(#il)" opacity=".588"/>
-  <path transform="translate(324.57 331.53)" d="m735.06 733.04l2.755 21.089 44.411-15.388 4.851-22.39-3.936-22.052-22.452-36.593-8.28 30.305-17.35 45.029z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#bz)"/>
-  <path transform="translate(324.57 331.53)" d="m831.81 730.29l15.822 14.905 20.855 2.9-1.59-39.926 8.325-30.508-7.165-6.341-21.697 20.942-14.55 38.028z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#by)"/>
- </g>
- <g transform="translate(324.57 331.53)" clip-path="url(#ik)" filter="url(#ij)">
-  <path d="M910.14 746.31l32.613 5.174-.361-23.876 7.188-29.682-8.45-5.264-21.823 26.511-9.167 27.137z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
-  <path d="M877.52 650.19h123.04v172.53H877.52z" enable-background="accumulate" fill="none"/>
- </g>
- <g transform="translate(324.57 331.53)" clip-path="url(#ii)" filter="url(#ih)">
-  <path d="M964 754.69l18.429 7.465 9.071-36.964-14.87 4.839L964 754.69z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
-  <path d="M924.9 677.06h142.13v125.16H924.9z" enable-background="accumulate" fill="none"/>
- </g>
- <g stroke-miterlimit="1">
-  <path d="m596.57 400.85h440v376h-440z" fill="none" stroke="#f8d615" stroke-width="18"/>
-  <path d="m104.57 248.85h1684v1292h-1684z" fill="none" stroke="#f83615" stroke-width="18"/>
-  <path d="M3407.4 296.46h522.57v1182.5H3407.4z" fill="url(#ig)" stroke="#f815bb" stroke-width="13.347"/>
- </g>
- <g transform="matrix(1.0057 0 0 2.3995 3452.3 -18.515)" clip-path="url(#if)" enable-background="new">
-  <g filter="url(#aq)">
-   <g transform="translate(-174.03 62.156)" filter="url(#g)">
-    <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-    <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
-   </g>
-  </g>
-  <g transform="translate(-174.03 62.156)" enable-background="new" filter="url(#g)" opacity=".18">
-   <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-   <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
-  </g>
- </g>
- <path d="M3492.3 296.46H3930v902.66h-437.7z" fill="#fff" stroke="#f8d615" stroke-miterlimit="1" stroke-width="18"/>
- <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#ie)" enable-background="new" filter="url(#id)">
-  <path d="M36.494 811.806l-14.799 11.372-17.47-31.162 14.663.65 17.606 19.14z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
-  <path d="M-55 757.2h182v177H-55z" enable-background="accumulate" fill="none"/>
- </g>
- <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#ic)" enable-background="new" filter="url(#gd)">
-  <path d="m83.111 790.72l-28.201 12.855-5.658-21.687-13.943-25.046 6.325-6.88 26.384 18.51 15.094 22.249z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
-  <path d="M-22 696.2h165v176H-22z" enable-background="accumulate" fill="none"/>
- </g>
- <path transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" d="m332.34 898.39l-32.732-61.3-37.617 45.106c2.177 1.317 5.774-20.856 45.6-64.417l24.749 80.61z" clip-path="url(#gc)" enable-background="accumulate" fill="#fff" fill-rule="evenodd" filter="url(#gb)" opacity=".5"/>
- <g clip-path="url(#ga)">
-  <g fill-rule="evenodd">
-   <g enable-background="new">
-    <path transform="matrix(.71488 -.46488 .26446 2.3151 3478.4 126.16)" d="m245.12 100.05s-47.128-31.647-67.215-35.801c-20.038-4.144-38.473-3.318-51.934 13.607s-12.077 61.265-13.536 86.97 2.55 70.177 17.605 88.666c15.055 18.488 45.886 13.585 49.927 21.414 2.213 4.287 65.152-174.86 65.152-174.86z" enable-background="accumulate" fill="url(#r)"/>
-    <path transform="matrix(.71488 -.46488 .26446 2.3151 3478.4 126.16)" d="M135.38 82.018s26.344 1.939 37.633 13.903c11.415 12.097 13.735 21.332 15.296 37.735 1.563 16.425-.85 28.418-7.814 36.037s-1.004 19.583-25.916 12.071-27.032-27.783-26.515-46.305c.517-18.529 7.316-53.441 7.316-53.441z" enable-background="accumulate" fill="url(#q)"/>
-    <path transform="matrix(.71488 -.46488 .26446 2.3151 3478.4 126.16)" d="M135.65 81.927s-4.645 16.365.588 28.563c5.488 12.793 27.224 44.26 27.224 54.656l22.656-5c2.542-6.966 3.21-15.752 2.188-26.5-1.562-16.403-3.867-25.621-15.281-37.719-9.655-10.232-31.593-13.375-37.375-14z" enable-background="new" fill="url(#p)"/>
-   </g>
-   <g enable-background="new">
-    <path d="M4043.297 824.626l-.09-.006c-1.489 1.728-6.783 2.02-7.718 20.884-.878 17.694 13.035 44.859 15.06 47.837 1.636 2.403 3.427 4.343 5.205 5.58l1.41.916c1.894 1.031 3.7 1.38 5.163 1.19 3.177-.414 5.214-.812 7.238-1.183 2.025-.372 2.592-1.8 3.707-2.078 1.156-.288 2.255.9 6.345-.372 4.09-1.271 5.587-1.894 6.324-2.566.765-.698 1.86-1.592 2.549-2.999 1.962.51 3.823.346 5.31-.58 3.08-1.92 5.084-3.12 6.998-4.722 1.536-1.285 2.513-3.421 2.759-4.073.246-.653.183-1.71.211-1.754.047-.072.351-.13.55-.906 1.07-4.167 2.968-12.778
-3.16-14.38.193-1.594.324-3.178.42-4.11.056-.54-.046-2.136-.017-2.27.04-.187.317-.518.401-1.098.404-2.783.343-5.237.292-8.675-.05-3.438-.44-11.267-.995-13.482-.356-1.423-.708-2.109-1.051-2.478-.065-.06-.119-.145-.18-.2-.02-.015-.043-.004-.062-.017-.303-.265-.59-.545-1.13-.839-.972-.527-2.393-1.283-3.937-1.684-.514-.134-1.041-.17-1.572-.205-3.591-.231-9.115-.108-10.396 1.072-1.593-1.244-3.874-2.542-5.879-2.746-3.086-.313-5.002-.546-6.953-.776-1.952-.23-1.73.464-2.958.32-1.328-.155-1.76-1.022-5.568-1.302-3.577-.262-9.087-.095-10.397 1.072-1.593-1.245-3.872-2.542-5.878-2.746-3.087-.313-5.006-.472-6.958-.702-.663-.078-1.055.01-1.364.079z" enable-background="new" fill="#bcb786"/>
-    <g transform="matrix(1.0047 .1075 -.04506 2.3971 3818.4 1782.9)" clip-path="url(#fz)" enable-background="new" filter="url(#fy)">
-     <path d="M229.94-409.12c-3.558.05-9.024.36-10.303.904-1.606-.447-3.903-.881-5.9-.877a979.03 979.03 0 0 1-6.907 0c-.66-.003-1.048.068-1.353.11v1.096c.12-.18.393-.69.95-.767.747-.103 5.17-.151 7.31-.11 1.775.035 4.455.274 6.39.96.32.113.618.273.891.41 1.964.987 7.944 4.302 7.944 4.302s-6.633-3.948-7.483-4.439c-.203-.117-.575-.258-1.036-.41 1.22-.449 5.076-.62 7.828-.713 3.024-.102 3.348-.09 5.41.192 2.13.29 3.34.602 3.34.602s-.08-.64 1.035-.794c.748-.103 5.17-.152 7.31-.11 2.07.04 5.366.407 7.282 1.37 1.003.504 3.035 1.569 4.795 2.536l.096-.02s-3.58-2.162-4.43-2.653c-.204-.117-.575-.258-1.037-.411 1.22-.448 5.047-.62 7.8-.712 3.024-.102 3.347-.09 5.41.191 1.954.267 3.013.53 3.195.576l-.027-.312a8.503 8.503 0 0 0-1.4-.357c-1.301-.235-3.4-.602-5.51-.564-3.571.064-9.052.356-10.302.904-1.606-.447-3.877-.881-5.871-.877-3.072.007-4.994.01-6.936
-0-1.943-.009-1.713.28-2.936.274-1.322-.005-1.766-.354-5.555-.301M206.2-407.48c1.92.817 4.577 2.193 6.159 3.397s2.908 1.774 5.555 3.918c.885.718 1.748 1.35 2.591 1.922l.541-.19a57.511 57.511 0 0 1-2.269-1.622c-2.822-2.12-3.627-2.81-6.015-4.274s-4.1-2.366-6.562-3.15" enable-background="new"/>
-     <path d="M237.8-407.48c1.92.817 4.606 2.193 6.188 3.397.813.62 1.558 1.07 2.45 1.654l.65-.116a40.414 40.414 0 0 0-2.697-1.784c-2.389-1.465-4.128-2.366-6.59-3.151" enable-background="new"/>
-    </g>
-    <g transform="matrix(.9991 .27421 -.11493 2.3838 2962.6 1209.8)" clip-path="url(#fx)">
-     <path d="M1056.2-278.8c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#fw)" opacity=".75"/>
-     <path d="M1058.5-275.43c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#fv)" opacity=".75"/>
-    </g>
-   </g>
-   <path d="M3603.7 633.68c-3.826-60.621-16.906-121.51-17.254-181.22-.187-32.048 3.291-63.757 13.834-94.91 36.554-156.68 117.6-203.23 186.99-219.47 87.416-26.435 185.96 43.047 234.7 228.91 54.432 181.72 56.997 414.01 81.07 622.74 29.605 305.05 55.09 614.78 60.735 928.25-3.08 187.6-8.474 396.35-60.847 547.4-48.299 120.83-123.49 120.1-188.13 141.58-91.07 11.17-185.4-38.742-263.27-154.04-65.144-91.037-96.274-272.3-97.832-446.36-8.437-191.66 26.542-369.07 51.914-545.07 7.513-198.58 9.466-398.92 9.708-598.39-.841-77.252-7.13-153.13-11.612-229.41z" enable-background="accumulate" fill="#101414"/>
-   <path transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" d="M311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24-38.612-142.96-39.243-189.12-.631-46.184 10.83-108.61 30.678-158.3 20.048-50.192 36.897-44.846 42.125-92.593s-17.426-149.39-17.426-149.39l-55.86 39.598z" clip-path="url(#y)" enable-background="accumulate" fill="#fff" filter="url(#fu)" opacity=".25"/>
-   <path d="m3987.6 1371.5s16.85 88.825 28.865 129.46c12.014 40.638 53.027 134.48 53.027 134.48l52.896-306.15" enable-background="accumulate" fill="url(#ft)"/>
-   <path transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" d="m730.32 536.57c0 8.485 42.548 58.468 42.548 58.468l12.607-28.77-55.154-29.698z" clip-path="url(#fs)" enable-background="accumulate" fill="#fff" filter="url(#fr)" opacity=".08"/>
-  </g>
-  <g transform="matrix(1.0057 0 0 2.3995 3424.4 -24.137)" clip-path="url(#fq)" enable-background="new">
-   <g transform="translate(-174.03 62.156)" filter="url(#aq)">
-    <g filter="url(#g)">
-     <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-     <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
-    </g>
-    <g filter="url(#g)">
-     <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-     <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
-    </g>
-   </g>
-   <g enable-background="new" opacity=".18">
-    <g transform="translate(-174.03 62.156)" filter="url(#g)">
-     <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-     <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
-    </g>
-    <g transform="translate(-174.03 62.156)" filter="url(#g)">
-     <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
-     <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
-    </g>
-   </g>
-  </g>
-  <g transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" fill-rule="evenodd">
-   <path transform="translate(276 136)" d="m582.66-7.418l113.14 86.267 108.89 258.8 38.184 207.89 120.21 91.924s-12.728-287.09-19.799-313.96-149.91-393.15-149.91-393.15l-210.72 62.225z" clip-path="url(#fp)" enable-background="accumulate" filter="url(#fo)" opacity=".75"/>
-   <path d="m964.14 239.6s8.677 10.897 24.107 11.964c15.43 1.068 49.722-39.953 70.179-52.143 20.479-12.204 47.046-26.602 63.929-20.357 16.882 6.245 22.158 26.436 27.857 48.036 5.7 21.6 6.719 61.814-2.679 92.857-9.397 31.043-50.502 73.104-65.356 103.39s-11.607 39.821-11.607 39.821" enable-background="accumulate" fill="url(#el)"/>
-   <path d="m1124.5 207.63c-15.893-0.893-49.719 12.106-66.071 24.286-16.439 12.244-29.221 24.114-29.286 52.143-0.065 28.206 13.119 39.076 29.107 46.964s33.686 7.12 51.964-11.786c18.278-18.905 14.286-111.61 14.286-111.61z" enable-background="new" fill="url(#ek)"/>
-   <ellipse transform="matrix(.94347 -.12399 .14401 1.0958 451.95 134.6)" cx="385" cy="237.01" rx="86.429" ry="73.929" clip-path="url(#fn)" enable-background="accumulate" fill="url(#ef)" filter="url(#fm)" opacity=".75"/>
-   <path transform="translate(450.03 73.844)" d="m527.61 407.45s-122.04 38.403-187.51 9.632c-65.473-28.772-74.377-124.72-74.377-124.72s73.382-80.504 129.92-83.615c55.827-3.072 90.574 20.143 114.87 65.852 24.352 45.813 17.101 132.85 17.101 132.85z" enable-background="accumulate" fill="url(#fl)" mask="url(#fk)"/>
-   <path d="m772.17 393.35s36.218-27.382 51.607-35.893c15.177-8.393 25.714-11.607 35.893-11.607l-15.536 66.964" enable-background="accumulate" fill="url(#ee)"/>
-   <circle transform="translate(449.5 74.915)" cx="409.29" cy="306.65" r="36.25" enable-background="accumulate" fill="url(#ed)"/>
-   <path transform="translate(276 136)" d="m311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24 8.682-72.368-31.243-223.12l17.678-69.296 72.125-138.59-42.426-158.39-55.86 39.598z" clip-path="url(#y)" enable-background="accumulate" fill="#fff" filter="url(#fj)" opacity=".3"/>
-   <path d="m635.21 581.13c-14.142 12.728 39.233 34.58 76.368 24.042s104.64-35.564 103.24-79.196c-1.407-43.632-76.368-128.69-76.368-128.69l-103.24 183.85z" enable-background="accumulate" filter="url(#fi)" opacity=".5"/>
-   <circle transform="translate(449.67 74.915)" cx="410" cy="306.65" r="23.214" enable-background="accumulate" fill="url(#ec)"/>
-   <circle transform="translate(452 73.487)" cx="414.29" cy="303.08" r="7.5" enable-background="accumulate" fill="#fff" filter="url(#fh)" stroke="#000" stroke-linejoin="bevel"/>
-   <path d="m789.32 478.35s7.023 19.569-1.071 35-42.323 38.988-67.5 50c-25.31 11.07-85.473 32.964-101.79 41.964-16.461 9.082-18.214 12.679-18.214 12.679s-7.147-19.064 28.75-51.786c36.172-32.972 142.03-48.05 159.82-87.857z" enable-background="accumulate" fill="url(#eb)"/>
-  </g>
-  <g enable-background="new">
-   <g transform="matrix(1.0057 0 0 2.3995 3757 -22.424)" fill-rule="evenodd">
-    <path transform="translate(-329.81)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#x)" fill="url(#m)"/>
-    <ellipse transform="rotate(28.068 -88.085 -332.1)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#dz)"/>
-    <ellipse transform="rotate(28.068 -43.578 -333.81)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#fg)"/>
-   </g>
-   <path transform="matrix(1.0057 0 0 2.3995 3425.3 -22.424)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#x)" enable-background="new" fill="none" filter="url(#hd)" stroke="url(#l)" stroke-width="20.8"/>
-  </g>
-  <g transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" fill-rule="evenodd">
-   <circle transform="translate(452.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" stroke="#000" stroke-linejoin="bevel"/>
-   <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#m)" filter="url(#hc)" stroke="url(#l)" stroke-width="20.8"/>
-   <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#dy)"/>
-   <ellipse transform="rotate(-4.471 1823.1 -5529.2)" cx="429.57" cy="377.43" rx="72.08" ry="44.548" enable-background="accumulate" fill="url(#dx)" filter="url(#hb)"/>
-   <ellipse transform="matrix(1.4358 -.07 .07 1.4358 235.18 -63.865)" cx="437.7" cy="391.22" rx="36.612" ry="22.627" enable-background="accumulate" fill="url(#dw)" filter="url(#ha)"/>
-   <g transform="translate(450.03 73.844)" enable-background="new" filter="url(#gz)">
-    <circle cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#dv)"/>
-    <circle transform="translate(13.125 8.125)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#du)"/>
-    <circle transform="translate(32.946 7.5)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ej)"/>
-    <circle transform="translate(24.911 -10.268)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ei)"/>
-    <circle transform="translate(47.589 -.625)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#eh)"/>
-   </g>
-  </g>
-  <g fill="none" stroke="#000">
-   <path transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" d="M896.2 482.93c.985 4.35 4.537 6.18 7.387 7.892 4.46 2.513 6.52 1.522 9.154-.758 1.602-1.921 10.683-4.698 15.594-7.07 4.33-1.46 8.904-5.36 13.385-8.335 3.395-1.627 5.347.355 7.829 1.01 2.944.717 4.411 2.172 6.06 3.536 2.397 1.175-.927 3.143 3.284 4.293 1.19.218 2.417.577 3.283-.505" enable-background="new"/>
-   <path transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" d="M910.85 475.35c2.315-.032 3.178.643 5.493-.82 3.455-3.082 5.402-3.146 7.955-4.42 3.026-1.315 6.535 8.152 10.102 9.849 2.395-.822 1.289 1.794 1.452 2.651.057 2.647 2.807 3.679 4.356 5.43 3.316 2.256 7.375 6.296 11.112 5.303 6.445-2.93 10.28-1.281 16.29-7.386.703-1.182-.585-6.895 3.093-7.198 2.524.254 4.166.05 6.06.569 5.442 2.117 7.738 6.45 14.71 7.955 6.184.966 7.613 3.794 13.89 5.05M876.98 483.52c2.399-.794 6.106 4.192 8.173 7.046.593 2.68 1.154 5.486.758 12.122.785 2.417 2.68 3.03 4.798 3.283 3.117-.537 5.877-1.325 7.324-3.03 1.871-1.942 5.312 2.393 8.08 4.04 3.61 1.912 7.775 1.979 11.87 2.273 1.703-.231 2.37 4.515 3.283 8.08.384 4.379-.886 6.897-1.768 9.85-.294 2.496 2.988 3.53 6.313 4.546 3.183.74 6.545 1.661 9.092 1.767 5.142.875 8.088 2.69 12.122 4.04 2.239.817 3.26 2.243 4.545 3.536" enable-background="new"/>
-  </g>
-  <g transform="matrix(.9991 .27421 -.11493 2.3838 2962.6 1209.8)" enable-background="new" fill-rule="evenodd" mask="url(#gy)">
-   <path d="M1111.48-285.971l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.312-.486.21-1.737.585-4.093 1.47-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.593c-1.894.42-1.675.642-2.875.875-1.296.252-1.721-.009-5.437.782-3.49.742-8.895 1.93-10.156 2.687-1.584-.18-3.868-.322-5.844-.031-3.04.447-4.916.673-6.844.906-.655.08-1.04.2-1.343.281-.427.132-.686.26-1.375.344-1.312.16-1.763-.157-5.532.281-3.554.413-9.005 1.273-10.25 1.938-1.599-.297-3.857-.534-5.843-.344-3.06.293-4.972.484-6.907.656-1.934.173-1.688.423-2.906.532-1.316.117-1.76-.164-5.531.25-3.542.388-9.008 1.209-10.281 1.875-1.6-.295-3.887-.507-5.875-.313-3.058.3-4.941.48-6.875.656-.658.06-1.04.179-1.344.25-.428.12-.683.218-1.375.282-1.316.12-1.76-.195-5.531.218-3.556.39-9.006 1.24-10.25
-1.907-1.599-.295-3.86-.524-5.844-.313-3.056.325-4.974.526-6.906.719s-1.69.44-2.906.562c-1.315.132-1.763-.164-5.532.282-3.538.418-8.977 1.292-10.25 1.968-1.597-.28-3.86-.42-5.843-.187-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.127-.685.267-1.375.344-1.314.146-1.768-.174-5.531.312-3.55.46-8.979 1.42-10.22 2.125-1.592-.244-3.833-.381-5.812-.125-3.047.395-4.95.649-6.875.907-1.924.257-1.726.493-2.937.656-1.31.176-1.748-.105-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.255-5.813.094-3.026.536-4.899.861-6.812 1.187-.65.111-1.014.271-1.313.375-.42.165-.663.332-1.344.469-1.294.262-1.727-.006-5.437.813-3.499.771-8.846 2.382-10.062 3.218-1.563-.077-3.758.086-5.688.594-2.972.783-4.817 1.232-6.687 1.75s-1.667.767-2.844 1.094c-1.272.353-1.697.107-5.344 1.187-3.424 1.015-8.65 2.934-9.875 3.844-1.539.013-3.72.272-5.625.875-2.93.928-4.75 1.459-6.594
-2.063-.626.205-.991.392-1.28.53-.408.215-.654.41-1.313.626-1.255.411-1.686.189-5.281 1.437-3.39 1.178-8.595 3.214-9.782 4.157-1.524.06-3.65.395-5.53 1.062-2.898 1.028-4.7 1.676-6.532 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.469-1.507.108-3.635.499-5.5 1.219a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.593v.031l-8 3.188-12.476 3.492 7.93 19.278c-.592 1.973 12.545-4.739 12.545-4.739.227-.144.45-.272.72-.375 1.08-.41 2.17-.215 6-1.687 3.828-1.472 5.223-2.005 5.905-2.406.68-.4 1.612-.88 2.22-1.531 1.826-.138 3.57-.494 4.937-1 2.968-1.1 4.875-1.807 6.78-2.47 1.907-.662 2.355-1.414 3.407-1.78 1.092-.38 2.195-.166 6.063-1.532 3.867-1.366 5.283-1.827 5.968-2.218.702-.4 1.701-.933 2.313-1.594 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.926-1.622 6.844-2.25 1.538-.504 2.174-1.047 2.906-1.438.23-.134.476-.253.75-.343 1.098-.36
-2.181-.082 6.094-1.313 3.912-1.231 5.366-1.673 6.062-2.031.694-.357 1.63-.793 2.25-1.406 1.866-.023 3.636-.267 5.032-.688 3.03-.913 4.992-1.43 6.937-1.969 1.945-.538 2.426-1.264 3.5-1.562 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.734-.33 1.813-.754 2.437-1.375 1.998.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.245-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.134-.23 2.305.209 6.344-.5 4.04-.71 5.5-.927 6.219-1.188.716-.26 1.704-.567 2.344-1.093 1.924.239 3.748.224 5.187 0 3.127-.488 5.155-.701 7.156-.97 2.002-.267 2.49-.944 3.594-1.093 1.147-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.281-.937.737-.247 1.798-.586 2.438-1.125 2.05.335 3.973.398 5.5.218 3.142-.368 5.18-.559 7.187-.78 1.611-.179 2.265-.609 3.031-.845.241-.085.495-.155.782-.187 1.15-.128 2.301.347 6.375-.125s5.559-.61 6.28-.844c.72-.232 1.701-.473 2.345-.969 1.936.334 3.77.405
-5.219.25 3.146-.334 5.177-.518 7.187-.718 2.01-.2 2.484-.827 3.594-.938 1.15-.115 2.296.365 6.375-.062s5.589-.562 6.312-.782c.74-.223 1.796-.513 2.438-1.03 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.03-.781.242-.081.494-.13.782-.157 1.152-.105 2.293.393 6.375 0s5.589-.53 6.312-.75c.721-.218 1.7-.447 2.344-.937 1.938.35 3.769.454 5.219.312 3.149-.308 5.176-.473 7.187-.656 2.012-.183 2.515-.838 3.625-.937 1.153-.104 2.293.384 6.375 0 4.083-.385 5.59-.501 6.313-.72.74-.222 1.796-.514 2.437-1.03 2.058.401 4.003.503 5.532.343 3.146-.328 5.177-.522 7.187-.718 1.613-.158 2.266-.632 3.031-.875.241-.088.464-.122.75-.157 1.149-.14 2.317.34 6.375-.25 4.059-.59 5.562-.777 6.282-1.03.716-.254 1.674-.559 2.312-1.095 1.92.212 3.72.152 5.156-.093 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.563-1.281 1.128-.25 2.27.116 6.25-.875s5.43-1.42
-6.125-1.781c.722-.376 1.761-.87 2.375-1.531 1.963-.012 3.793-.292 5.218-.844 2.952-1.145 4.874-1.87 6.688-2.75 1.456-.707 2.32-1.702 2.531-2 .212-.298.1-.729.125-.75.043-.035.34-.094.5-.438.86-1.847 2.323-5.627 2.438-6.312.113-.682.168-1.353.218-1.75.03-.23-.147-.88-.125-.938.031-.082.289-.25.344-.5.266-1.198.09-2.207-.125-3.625-.214-1.417-.972-4.614-1.625-5.469-.659-.861-1.225-1.01-1.75-1z" enable-background="new" fill="#bcb786"/>
-   <g clip-path="url(#gx)">
-    <path d="M1107.4-284.05c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
-1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
-2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
-2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
-3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
-1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
-3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#gw)"/>
-    <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#gv)"/>
-    <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#gu)"/>
-    <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#gt)"/>
-    <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25
-1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1 .17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437
-1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0 1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956
-5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218 1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584
-5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969 2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101
-7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23 2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219
-1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474 7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
-2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.442 3.94 1.579 5.39.19 2.86-.088 3.468c-.278.609-.944.429-1.237.495.531.186.89.213.953 1.057.058.814-.134 1.64-.52 2.806-.391 1.18-1.845 4.35-2.286 4.599-.452.255-.952.182-1.288.05z" enable-background="new" filter="url(#gs)"/>
-    <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#gr)"/>
-    <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#gq)"/>
-    <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#gp)"/>
-    <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#go)"/>
-    <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#gn)"/>
-    <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#gm)"/>
-    <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#gl)"/>
-    <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#gk)"/>
-    <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#gj)"/>
-    <g fill="#fff" filter="url(#gi)">
-     <path d="M744.94-212.12s7.222-3.223 9.063-3.5 3.352-.003 6 .563c2.647.565 8.735 2.215 11.188 3.374s5.312 3.563 5.312 3.563-7.146-2.78-10.188-3.563-7.645-2.083-10.375-2.312-11 1.875-11 1.875z"/>
-     <path d="m735.47-206.95s3.66-2.223 5.5-2.5 3.665 0.247 6.313 0.813 8.735 2.215 11.188 3.375 6.562 2.125 6.562 2.125-8.396-1.343-11.438-2.125-7.957-2.334-10.688-2.563-7.438 0.875-7.438 0.875zm24.38-10.66s8.544-3.299 10.398-3.458c1.854-0.16 3.642 0.48 6.248 1.212s8.577 2.766 10.95 4.08 6.414 2.537 6.414 2.537-8.294-1.873-11.279-2.848c-2.985-0.974-7.792-2.834-10.503-3.236s-12.228 1.713-12.228 1.713zm15.35-5.62s7.771-2.782 9.628-2.904c1.857-0.12 3.631 0.555 6.222 1.341 2.59 0.787 8.519 2.942 10.864 4.304 2.346 1.362 6.36 2.67 6.36 2.67s-8.253-2.045-11.217-3.08c-2.965-1.035-7.733-2.995-10.434-3.452-2.702-0.458-11.422 1.121-11.422 1.121zm14.44-4.72s8.683-3.52 10.542-3.605 3.62 0.624 6.195 1.46c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.408 6.307 2.793 6.307 2.793s-8.212-2.204-11.156-3.297-7.673-3.144-10.365-3.654-12.3 1.789-12.3 1.789zm14.86-5.38s7.808-2.583 9.666-2.668c1.86-0.085 3.62
-0.625 6.195 1.461 2.575 0.837 8.46 3.107 10.78 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.213-2.204-11.156-3.296-7.673-3.144-10.365-3.654-11.426 0.85-11.426 0.85zm15.06-4.25s8.558-2.583 10.417-2.668 3.62 0.625 6.195 1.461c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.212-2.204-11.156-3.296-7.673-3.144-10.365-3.654-12.176 0.85-12.176 0.85zm16.67-5.02s6.967-1.987 8.828-1.968c1.86 0.02 3.579 0.827 6.102 1.807 2.524 0.98 8.272 3.578 10.508 5.113 2.236 1.536 6.14 3.143 6.14 3.143s-8.075-2.662-10.952-3.919c-2.878-1.256-7.484-3.57-10.143-4.231-2.66-0.66-10.482 0.055-10.482 0.055zm14.5-3.4s7.688-2.028 9.548-1.968 3.56 0.902 6.063 1.936c2.502 1.033 8.194 3.752 10.397 5.335 2.203 1.582 6.072 3.272 6.072 3.272s-8.017-2.833-10.868-4.15c-2.85-1.318-7.407-3.73-10.05-4.446s-11.162 0.021-11.162 0.021zm14.09-3.21s8.17-1.97 10.027-1.854c1.857 0.115 3.532 1.01 6.002
-2.118s8.077 3.997 10.23 5.645 5.972 3.454 5.972 3.454-7.928-3.074-10.738-4.476-7.291-3.95-9.913-4.746c-2.621-0.796-11.58-0.141-11.58-0.141zm16.56-2.39s8.085-1.908 9.938-1.737c1.853 0.172 3.5 1.117 5.935 2.3 2.436 1.182 7.952 4.24 10.055 5.953s5.864 3.633 5.864 3.633-7.832-3.312-10.597-4.8-7.168-4.169-9.764-5.044c-2.597-0.876-11.431-0.305-11.431-0.305zm15.2-2.75s7.642-1.428 9.495-1.265c1.854 0.162 3.505 1.1 5.946 2.27s7.973 4.203 10.084 5.905c2.112 1.703 5.881 3.605 5.881 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.998-0.77-10.998-0.77zm14.87-1.64s8.642-1.553 10.495-1.39c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.998-0.644-11.998-0.644zm16.25-2.31s7.642-0.865 9.495-0.703c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203 10.084
-5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.862-10.998-1.331-10.998-1.331zm15.13-1.19s8.58-1.49 10.433-1.328c1.854 0.163 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.906c2.111 1.702 5.88 3.605 5.88 3.605s-7.846-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.862-11.935-0.706-11.935-0.706zm16.25-2.06s7.83-0.803 9.683-0.64c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.185-1.394-11.185-1.394zm15.37-1.25s8.392-1.178 10.245-1.015c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-11.748-1.02-11.748-1.02zm16.19-2.06s6.892-0.99 8.745-0.828c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203
-10.084 5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749-7.188-4.135-9.788-4.998c-2.6-0.862-10.248-1.206-10.248-1.206zm17.16-0.94s6.83-1.178 8.683-1.015c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.185-1.02-10.185-1.02zm16.1-2s6.08-0.428 7.933-0.265c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.435-1.77-9.435-1.77zm15.8-1.37s6.454-0.678 8.308-0.515c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.81-1.52-9.81-1.52zm15.6-1.86s5.498-0.91 7.358-0.853c1.86 0.056 3.562 0.896 6.066 1.925
-2.504 1.03 8.2 3.739 10.406 5.318 2.205 1.578 6.078 3.261 6.078 3.261s-8.022-2.819-10.875-4.131c-2.853-1.313-7.413-3.716-10.06-4.429-2.645-0.712-8.973-1.091-8.973-1.091zm17.4-2.46s4.547-1.156 6.408-1.186c1.86-0.03 3.6 0.73 6.149 1.642 2.55 0.912 8.365 3.354 10.64 4.829 2.277 1.474 6.224 2.976 6.224 2.976s-8.145-2.444-11.055-3.623c-2.91-1.178-7.578-3.368-10.253-3.957-2.676-0.588-8.113-0.68-8.113-0.68zm14.5-3.03s5.96-1.774 7.82-1.83c1.86-0.057 3.61 0.68 6.172 1.555 2.562 0.876 2.522 0.857 5.333 1.49 2.797 0.63 7.077 1.513 7.077 1.513s-3.616-0.016-6.792-0.466c-3.116-0.441-7.375-1.698-10.058-2.249-2.684-0.55-9.552-0.013-9.552-0.013z" enable-background="new"/>
-     <path d="M1099.2-279.93c.161.269 11.208-4.6 12.188-4.688.98-.087 2 3.125 2 3.125s-.775-1.504-2.875-1.062-11.301 2.671-11.312 2.625z"/>
-    </g>
-    <path d="M1107.5-284.09c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
-1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
-2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
-2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
-3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
-1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
-3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#gh)" opacity=".25"/>
-    <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#gg)" opacity=".25"/>
-    <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#gf)" opacity=".25"/>
-    <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#ge)" opacity=".25"/>
-    <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25
-1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1 .17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437
-1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0 1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956
-5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218 1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584
-5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969 2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101
-7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23 2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219
-1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474 7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
-2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.221 3.85 1.358 5.301.19 2.86-.088 3.469c-.278.608-.723.517-1.016.583.531.186.67.125.732.969.058.813-.134 1.64-.52 2.806-.392 1.18-1.846 4.35-2.286 4.598-.452.256-.731.27-1.067.14z" enable-background="new" filter="url(#ff)" opacity=".25"/>
-    <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#fe)" opacity=".25"/>
-    <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#fd)" opacity=".25"/>
-    <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#fc)" opacity=".25"/>
-    <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#fb)" opacity=".25"/>
-    <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#fa)" opacity=".25"/>
-    <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#ez)" opacity=".25"/>
-    <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#ey)" opacity=".25"/>
-    <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#ex)" opacity=".25"/>
-    <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#ew)" opacity=".25"/>
-   </g>
-  </g>
-  <path d="M3840.7 940.04c1.651-7.722 3.538-13.762 4.889-23.633.803-8.777 3.33-4.873 7.302-20.148 1.41-5.374 5.507.94 9.016-5.757 1.278-1.927 2.901-.97 4.508-.151 3.787 3.165 5.859 8.887 8.381 13.937 6.174 14.326 20.651 19.06 23.62 15.149 1.442-6.97 7.926-12.979 12.444-26.663.752-2.694 11.796-20.982 14.73-15.755" enable-background="new" fill="none" stroke="#000"/>
-  <path d="M3865.4 915.04c7.405-7.758 13.89-21.376 20.826-32.117 3.33-4.726 6.909 7.717 10.857 8.635 2.31-.523 3.734 2.886 5.714 3.939 5.186 3.162 2.412 9.274 10.032 15.452 6.191 4.128 8.958-16.313 14.985-17.573 4.906-1.207 8.145-.758 11.683-.606 3.95.333 4.102-8.393 6.096-12.725 2.997-6.731 7.196-4.438 10.203-11.376 1.023-3.323 1.965-7.224 2.75-12.257.887-4.8 3.057.734 4.825 3.03" enable-background="new" fill="none" stroke="#000"/>
-  <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#ev)" filter="url(#eu)">
-   <path d="M910.14 746.31l32.613 5.174-.361-23.876 7.188-29.682-8.45-5.264-21.823 26.511-9.167 27.137z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
-   <path d="M877.52 650.19h123.04v172.53H877.52z" enable-background="accumulate" fill="none"/>
-  </g>
-  <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#et)" filter="url(#es)">
-   <path d="M964 754.69l18.429 7.465 9.071-36.964-14.87 4.839L964 754.69z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
-   <path d="M924.9 677.06h142.13v125.16H924.9z" enable-background="accumulate" fill="none"/>
-  </g>
- </g>
- <path d="m592.8 398.62l2899.5-102.16" fill="#f8d615" fill-rule="evenodd" marker-end="url(#er)" stroke="#f8d615" stroke-width="17.844"/>
- <path d="m576.48 779.92l2914.5 416.44" enable-background="new" fill="#f8d615" fill-rule="evenodd" marker-end="url(#eq)" stroke="#f8d615" stroke-width="18"/>
- <g font-family="sans-serif" letter-spacing="0" word-spacing="0">
-  <text transform="translate(48.571 195.53)" x="80.219" y="107.387" fill="#f83615" font-size="40" style="line-height:125%">
-   <tspan x="80.219" y="107.387" font-size="50">CROP_DEFAULT</tspan>
-  </text>
-  <g font-size="45.314">
-   <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3861.367" y="1281.72" enable-background="new" fill="#f80000" fill-opacity="0" style="line-height:125%">
-    <tspan x="3861.367" y="1281.72" font-size="56.642">COMPOSE_PADDED</tspan>
-   </text>
-   <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3615.155" y="49.157" enable-background="new" fill="#f8d615" style="line-height:125%">
-    <tspan x="3615.155" y="49.157" font-size="50">COMPOSE_ACTIVE</tspan>
-   </text>
-   <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="2429.153" y="-3.166" enable-background="new" fill="#f83615" style="line-height:125%">
-    <tspan x="2429.153" y="-3.166" font-size="50">COMPOSE_DEFAULT</tspan>
-   </text>
-   <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3681.545" y="1289.954" enable-background="new" fill="#f815bb" style="line-height:125%">
-    <tspan x="3681.545" y="1289.954" font-size="50">COMPOSE_PADDED</tspan>
-   </text>
-  </g>
-  <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="2438.062" y="1368.429" enable-background="new" font-size="50" style="line-height:125%">
-   <tspan x="2438.062" y="1368.429">COMPOSE_BOUNDS</tspan>
-  </text>
-  <g font-size="40">
-   <text transform="translate(48.571 195.53)" x="8.082" y="1438.896" enable-background="new" style="line-height:125%">
-    <tspan x="8.082" y="1438.896" font-size="50">CROP_BOUNDS</tspan>
-   </text>
-   <text transform="translate(48.571 195.53)" x="1455.443" y="-26.808" enable-background="new" style="line-height:125%">
-    <tspan x="1455.443" y="-26.808" font-size="50">overscan area</tspan>
-   </text>
-   <text transform="translate(48.571 195.53)" x="179.631" y="385.388" enable-background="new" fill="#f8d615" style="line-height:125%">
-    <tspan x="179.631" y="385.388" font-size="50">CROP_ACTIVE</tspan>
-   </text>
-   <text transform="translate(48.571 195.53)" x="636.674" y="-138.845" enable-background="new" style="line-height:125%">
-    <tspan x="636.674" y="-138.845" font-size="70" font-weight="bold">DATA SOURCE</tspan>
-   </text>
-  </g>
-  <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3178.715" y="-129.061" enable-background="new" font-size="45.314" style="line-height:125%">
-   <tspan x="3178.715" y="-129.061" font-size="70" font-weight="bold">DATA SINK</tspan>
-  </text>
- </g>
-</svg>
diff --git a/Documentation/media/uapi/v4l/selections-common.rst b/Documentation/media/uapi/v4l/selections-common.rst
deleted file mode 100644
index 28b32db280f2..000000000000
--- a/Documentation/media/uapi/v4l/selections-common.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-selections-common:
-
-Common selection definitions
-============================
-
-While the :ref:`V4L2 selection API <selection-api>` and
-:ref:`V4L2 subdev selection APIs <v4l2-subdev-selections>` are very
-similar, there's one fundamental difference between the two. On
-sub-device API, the selection rectangle refers to the media bus format,
-and is bound to a sub-device's pad. On the V4L2 interface the selection
-rectangles refer to the in-memory pixel format.
-
-This section defines the common definitions of the selection interfaces
-on the two APIs.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    v4l2-selection-targets
-    v4l2-selection-flags
diff --git a/Documentation/media/uapi/v4l/standard.rst b/Documentation/media/uapi/v4l/standard.rst
deleted file mode 100644
index bf8959b72988..000000000000
--- a/Documentation/media/uapi/v4l/standard.rst
+++ /dev/null
@@ -1,192 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _standard:
-
-***************
-Video Standards
-***************
-
-Video devices typically support one or more different video standards or
-variations of standards. Each video input and output may support another
-set of standards. This set is reported by the ``std`` field of struct
-:c:type:`v4l2_input` and struct
-:c:type:`v4l2_output` returned by the
-:ref:`VIDIOC_ENUMINPUT` and
-:ref:`VIDIOC_ENUMOUTPUT` ioctls, respectively.
-
-V4L2 defines one bit for each analog video standard currently in use
-worldwide, and sets aside bits for driver defined standards, e. g.
-hybrid standards to watch NTSC video tapes on PAL TVs and vice versa.
-Applications can use the predefined bits to select a particular
-standard, although presenting the user a menu of supported standards is
-preferred. To enumerate and query the attributes of the supported
-standards applications use the :ref:`VIDIOC_ENUMSTD`
-ioctl.
-
-Many of the defined standards are actually just variations of a few
-major standards. The hardware may in fact not distinguish between them,
-or do so internal and switch automatically. Therefore enumerated
-standards also contain sets of one or more standard bits.
-
-Assume a hypothetic tuner capable of demodulating B/PAL, G/PAL and I/PAL
-signals. The first enumerated standard is a set of B and G/PAL, switched
-automatically depending on the selected radio frequency in UHF or VHF
-band. Enumeration gives a "PAL-B/G" or "PAL-I" choice. Similar a
-Composite input may collapse standards, enumerating "PAL-B/G/H/I",
-"NTSC-M" and "SECAM-D/K". [#f1]_
-
-To query and select the standard used by the current video input or
-output applications call the :ref:`VIDIOC_G_STD <VIDIOC_G_STD>` and
-:ref:`VIDIOC_S_STD <VIDIOC_G_STD>` ioctl, respectively. The
-*received* standard can be sensed with the
-:ref:`VIDIOC_QUERYSTD` ioctl.
-
-.. note::
-
-   The parameter of all these ioctls is a pointer to a
-   :ref:`v4l2_std_id <v4l2-std-id>` type (a standard set), *not* an
-   index into the standard enumeration. Drivers must implement all video
-   standard ioctls when the device has one or more video inputs or outputs.
-
-Special rules apply to devices such as USB cameras where the notion of
-video standards makes little sense. More generally for any capture or
-output device which is:
-
--  incapable of capturing fields or frames at the nominal rate of the
-   video standard, or
-
--  that does not support the video standard formats at all.
-
-Here the driver shall set the ``std`` field of struct
-:c:type:`v4l2_input` and struct
-:c:type:`v4l2_output` to zero and the :ref:`VIDIOC_G_STD <VIDIOC_G_STD>`,
-:ref:`VIDIOC_S_STD <VIDIOC_G_STD>`, :ref:`VIDIOC_QUERYSTD` and :ref:`VIDIOC_ENUMSTD` ioctls
-shall return the ``ENOTTY`` error code or the ``EINVAL`` error code.
-
-Applications can make use of the :ref:`input-capabilities` and
-:ref:`output-capabilities` flags to determine whether the video
-standard ioctls can be used with the given input or output.
-
-Example: Information about the current video standard
-=====================================================
-
-.. code-block:: c
-
-    v4l2_std_id std_id;
-    struct v4l2_standard standard;
-
-    if (-1 == ioctl(fd, VIDIOC_G_STD, &std_id)) {
-	/* Note when VIDIOC_ENUMSTD always returns ENOTTY this
-	   is no video device or it falls under the USB exception,
-	   and VIDIOC_G_STD returning ENOTTY is no error. */
-
-	perror("VIDIOC_G_STD");
-	exit(EXIT_FAILURE);
-    }
-
-    memset(&standard, 0, sizeof(standard));
-    standard.index = 0;
-
-    while (0 == ioctl(fd, VIDIOC_ENUMSTD, &standard)) {
-	if (standard.id & std_id) {
-	       printf("Current video standard: %s\\n", standard.name);
-	       exit(EXIT_SUCCESS);
-	}
-
-	standard.index++;
-    }
-
-    /* EINVAL indicates the end of the enumeration, which cannot be
-       empty unless this device falls under the USB exception. */
-
-    if (errno == EINVAL || standard.index == 0) {
-	perror("VIDIOC_ENUMSTD");
-	exit(EXIT_FAILURE);
-    }
-
-Example: Listing the video standards supported by the current input
-===================================================================
-
-.. code-block:: c
-
-    struct v4l2_input input;
-    struct v4l2_standard standard;
-
-    memset(&input, 0, sizeof(input));
-
-    if (-1 == ioctl(fd, VIDIOC_G_INPUT, &input.index)) {
-	perror("VIDIOC_G_INPUT");
-	exit(EXIT_FAILURE);
-    }
-
-    if (-1 == ioctl(fd, VIDIOC_ENUMINPUT, &input)) {
-	perror("VIDIOC_ENUM_INPUT");
-	exit(EXIT_FAILURE);
-    }
-
-    printf("Current input %s supports:\\n", input.name);
-
-    memset(&standard, 0, sizeof(standard));
-    standard.index = 0;
-
-    while (0 == ioctl(fd, VIDIOC_ENUMSTD, &standard)) {
-	if (standard.id & input.std)
-	    printf("%s\\n", standard.name);
-
-	standard.index++;
-    }
-
-    /* EINVAL indicates the end of the enumeration, which cannot be
-       empty unless this device falls under the USB exception. */
-
-    if (errno != EINVAL || standard.index == 0) {
-	perror("VIDIOC_ENUMSTD");
-	exit(EXIT_FAILURE);
-    }
-
-Example: Selecting a new video standard
-=======================================
-
-.. code-block:: c
-
-    struct v4l2_input input;
-    v4l2_std_id std_id;
-
-    memset(&input, 0, sizeof(input));
-
-    if (-1 == ioctl(fd, VIDIOC_G_INPUT, &input.index)) {
-	perror("VIDIOC_G_INPUT");
-	exit(EXIT_FAILURE);
-    }
-
-    if (-1 == ioctl(fd, VIDIOC_ENUMINPUT, &input)) {
-	perror("VIDIOC_ENUM_INPUT");
-	exit(EXIT_FAILURE);
-    }
-
-    if (0 == (input.std & V4L2_STD_PAL_BG)) {
-	fprintf(stderr, "Oops. B/G PAL is not supported.\\n");
-	exit(EXIT_FAILURE);
-    }
-
-    /* Note this is also supposed to work when only B
-       or G/PAL is supported. */
-
-    std_id = V4L2_STD_PAL_BG;
-
-    if (-1 == ioctl(fd, VIDIOC_S_STD, &std_id)) {
-	perror("VIDIOC_S_STD");
-	exit(EXIT_FAILURE);
-    }
-
-.. [#f1]
-   Some users are already confused by technical terms PAL, NTSC and
-   SECAM. There is no point asking them to distinguish between B, G, D,
-   or K when the software or hardware can do that automatically.
diff --git a/Documentation/media/uapi/v4l/streaming-par.rst b/Documentation/media/uapi/v4l/streaming-par.rst
deleted file mode 100644
index 425bd0ff1477..000000000000
--- a/Documentation/media/uapi/v4l/streaming-par.rst
+++ /dev/null
@@ -1,40 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _streaming-par:
-
-********************
-Streaming Parameters
-********************
-
-Streaming parameters are intended to optimize the video capture process
-as well as I/O. Presently applications can request a high quality
-capture mode with the :ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` ioctl.
-
-The current video standard determines a nominal number of frames per
-second. If less than this number of frames is to be captured or output,
-applications can request frame skipping or duplicating on the driver
-side. This is especially useful when using the
-:ref:`read() <func-read>` or :ref:`write() <func-write>`, which are
-not augmented by timestamps or sequence counters, and to avoid
-unnecessary data copying.
-
-Finally these ioctls can be used to determine the number of buffers used
-internally by a driver in read/write mode. For implications see the
-section discussing the :ref:`read() <func-read>` function.
-
-To get and set the streaming parameters applications call the
-:ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and
-:ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` ioctl, respectively. They take
-a pointer to a struct :c:type:`v4l2_streamparm`, which
-contains a union holding separate parameters for input and output
-devices.
-
-These ioctls are optional, drivers need not implement them. If so, they
-return the ``EINVAL`` error code.
diff --git a/Documentation/media/uapi/v4l/subdev-formats.rst b/Documentation/media/uapi/v4l/subdev-formats.rst
deleted file mode 100644
index 17bfb2beaa6a..000000000000
--- a/Documentation/media/uapi/v4l/subdev-formats.rst
+++ /dev/null
@@ -1,7833 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-mbus-format:
-
-Media Bus Formats
-=================
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_mbus_framefmt
-
-.. flat-table:: struct v4l2_mbus_framefmt
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``width``
-      - Image width in pixels.
-    * - __u32
-      - ``height``
-      - Image height in pixels. If ``field`` is one of ``V4L2_FIELD_TOP``,
-	``V4L2_FIELD_BOTTOM`` or ``V4L2_FIELD_ALTERNATE`` then height
-	refers to the number of lines in the field, otherwise it refers to
-	the number of lines in the frame (which is twice the field height
-	for interlaced formats).
-    * - __u32
-      - ``code``
-      - Format code, from enum
-	:ref:`v4l2_mbus_pixelcode <v4l2-mbus-pixelcode>`.
-    * - __u32
-      - ``field``
-      - Field order, from enum :c:type:`v4l2_field`. See
-	:ref:`field-order` for details.
-    * - __u32
-      - ``colorspace``
-      - Image colorspace, from enum
-	:c:type:`v4l2_colorspace`. See
-	:ref:`colorspaces` for details.
-    * - __u16
-      - ``ycbcr_enc``
-      - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - __u16
-      - ``quantization``
-      - Quantization range, from enum :c:type:`v4l2_quantization`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - __u16
-      - ``xfer_func``
-      - Transfer function, from enum :c:type:`v4l2_xfer_func`.
-        This information supplements the ``colorspace`` and must be set by
-	the driver for capture streams and by the application for output
-	streams, see :ref:`colorspaces`.
-    * - __u16
-      - ``reserved``\ [11]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-
-
-
-.. _v4l2-mbus-pixelcode:
-
-Media Bus Pixel Codes
----------------------
-
-The media bus pixel codes describe image formats as flowing over
-physical buses (both between separate physical components and inside
-SoC devices). This should not be confused with the V4L2 pixel formats
-that describe, using four character codes, image formats as stored in
-memory.
-
-While there is a relationship between image formats on buses and image
-formats in memory (a raw Bayer image won't be magically converted to
-JPEG just by storing it to memory), there is no one-to-one
-correspondence between them.
-
-The media bus pixel codes document parallel formats. Should the pixel data be
-transported over a serial bus, the media bus pixel code that describes a
-parallel format that transfers a sample on a single clock cycle is used. For
-instance, both MEDIA_BUS_FMT_BGR888_1X24 and MEDIA_BUS_FMT_BGR888_3X8 are used
-on parallel busses for transferring an 8 bits per sample BGR data, whereas on
-serial busses the data in this format is only referred to using
-MEDIA_BUS_FMT_BGR888_1X24. This is because there is effectively only a single
-way to transport that format on the serial busses.
-
-Packed RGB Formats
-^^^^^^^^^^^^^^^^^^
-
-Those formats transfer pixel data as red, green and blue components. The
-format code is made of the following information.
-
--  The red, green and blue components order code, as encoded in a pixel
-   sample. Possible values are RGB and BGR.
-
--  The number of bits per component, for each component. The values can
-   be different for all components. Common values are 555 and 565.
-
--  The number of bus samples per pixel. Pixels that are wider than the
-   bus width must be transferred in multiple samples. Common values are
-   1 and 2.
-
--  The bus width.
-
--  For formats where the total number of bits per pixel is smaller than
-   the number of bus samples per pixel times the bus width, a padding
-   value stating if the bytes are padded in their most high order bits
-   (PADHI) or low order bits (PADLO). A "C" prefix is used for
-   component-wise padding in the most high order bits (CPADHI) or low
-   order bits (CPADLO) of each separate component.
-
--  For formats where the number of bus samples per pixel is larger than
-   1, an endianness value stating if the pixel is transferred MSB first
-   (BE) or LSB first (LE).
-
-For instance, a format where pixels are encoded as 5-bits red, 5-bits
-green and 5-bit blue values padded on the high bit, transferred as 2
-8-bit samples per pixel with the most significant bits (padding, red and
-half of the green value) transferred first will be named
-``MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE``.
-
-The following tables list existing packed RGB formats.
-
-.. HACK: ideally, we would be using adjustbox here. However, Sphinx
-.. is a very bad behaviored guy: if the table has more than 30 cols,
-.. it switches to long table, and there's no way to override it.
-
-
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _v4l2-mbus-pixelcode-rgb:
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. flat-table:: RGB formats
-    :header-rows:  2
-    :stub-columns: 0
-    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`31` Data organization
-    * -
-      -
-      - Bit
-      - 31
-      - 30
-      - 29
-      - 28
-      - 27
-      - 26
-      - 25
-      - 24
-      - 23
-      - 22
-      - 21
-      - 20
-      - 19
-      - 18
-      - 17
-      - 16
-      - 15
-      - 14
-      - 13
-      - 12
-      - 11
-      - 10
-      - 9
-      - 8
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _MEDIA-BUS-FMT-RGB444-1X12:
-
-      - MEDIA_BUS_FMT_RGB444_1X12
-      - 0x1016
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB444-2X8-PADHI-BE:
-
-      - MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE
-      - 0x1001
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 0
-      - 0
-      - 0
-      - 0
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB444-2X8-PADHI-LE:
-
-      - MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE
-      - 0x1002
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 0
-      - 0
-      - 0
-      - 0
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB555-2X8-PADHI-BE:
-
-      - MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE
-      - 0x1003
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 0
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB555-2X8-PADHI-LE:
-
-      - MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE
-      - 0x1004
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 0
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-    * .. _MEDIA-BUS-FMT-RGB565-1X16:
-
-      - MEDIA_BUS_FMT_RGB565_1X16
-      - 0x1017
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-BGR565-2X8-BE:
-
-      - MEDIA_BUS_FMT_BGR565_2X8_BE
-      - 0x1005
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-BGR565-2X8-LE:
-
-      - MEDIA_BUS_FMT_BGR565_2X8_LE
-      - 0x1006
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-    * .. _MEDIA-BUS-FMT-RGB565-2X8-BE:
-
-      - MEDIA_BUS_FMT_RGB565_2X8_BE
-      - 0x1007
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB565-2X8-LE:
-
-      - MEDIA_BUS_FMT_RGB565_2X8_LE
-      - 0x1008
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-    * .. _MEDIA-BUS-FMT-RGB666-1X18:
-
-      - MEDIA_BUS_FMT_RGB666_1X18
-      - 0x1009
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RBG888-1X24:
-
-      - MEDIA_BUS_FMT_RBG888_1X24
-      - 0x100e
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB666-1X24_CPADHI:
-
-      - MEDIA_BUS_FMT_RGB666_1X24_CPADHI
-      - 0x1015
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 0
-      - 0
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - 0
-      - 0
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - 0
-      - 0
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-BGR888-1X24:
-
-      - MEDIA_BUS_FMT_BGR888_1X24
-      - 0x1013
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-BGR888-3X8:
-
-      - MEDIA_BUS_FMT_BGR888_3X8
-      - 0x101b
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-GBR888-1X24:
-
-      - MEDIA_BUS_FMT_GBR888_1X24
-      - 0x1014
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB888-1X24:
-
-      - MEDIA_BUS_FMT_RGB888_1X24
-      - 0x100a
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB888-2X12-BE:
-
-      - MEDIA_BUS_FMT_RGB888_2X12_BE
-      - 0x100b
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB888-2X12-LE:
-
-      - MEDIA_BUS_FMT_RGB888_2X12_LE
-      - 0x100c
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-    * .. _MEDIA-BUS-FMT-RGB888-3X8:
-
-      - MEDIA_BUS_FMT_RGB888_3X8
-      - 0x101c
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-ARGB888-1X32:
-
-      - MEDIA_BUS_FMT_ARGB888_1X32
-      - 0x100d
-      -
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB888-1X32-PADHI:
-
-      - MEDIA_BUS_FMT_RGB888_1X32_PADHI
-      - 0x100f
-      -
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB101010-1X30:
-
-      - MEDIA_BUS_FMT_RGB101010_1X30
-      - 0x1018
-      -
-      - 0
-      - 0
-      - r\ :sub:`9`
-      - r\ :sub:`8`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-.. raw:: latex
-
-    \endgroup
-
-
-The following table list existing packed 36bit wide RGB formats.
-
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _v4l2-mbus-pixelcode-rgb-36:
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. flat-table:: 36bit RGB formats
-    :header-rows:  2
-    :stub-columns: 0
-    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`35` Data organization
-    * -
-      -
-      - Bit
-      - 35
-      - 34
-      - 33
-      - 32
-      - 31
-      - 30
-      - 29
-      - 28
-      - 27
-      - 26
-      - 25
-      - 24
-      - 23
-      - 22
-      - 21
-      - 20
-      - 19
-      - 18
-      - 17
-      - 16
-      - 15
-      - 14
-      - 13
-      - 12
-      - 11
-      - 10
-      - 9
-      - 8
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _MEDIA-BUS-FMT-RGB121212-1X36:
-
-      - MEDIA_BUS_FMT_RGB121212_1X36
-      - 0x1019
-      -
-      - r\ :sub:`11`
-      - r\ :sub:`10`
-      - r\ :sub:`9`
-      - r\ :sub:`8`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-      - g\ :sub:`11`
-      - g\ :sub:`10`
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`11`
-      - b\ :sub:`10`
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-.. raw:: latex
-
-    \endgroup
-
-
-The following table list existing packed 48bit wide RGB formats.
-
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _v4l2-mbus-pixelcode-rgb-48:
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. flat-table:: 48bit RGB formats
-    :header-rows:  3
-    :stub-columns: 0
-    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`31` Data organization
-    * -
-      -
-      - Bit
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 47
-      - 46
-      - 45
-      - 44
-      - 43
-      - 42
-      - 41
-      - 40
-      - 39
-      - 38
-      - 37
-      - 36
-      - 35
-      - 34
-      - 33
-      - 32
-    * -
-      -
-      -
-      - 31
-      - 30
-      - 29
-      - 28
-      - 27
-      - 26
-      - 25
-      - 24
-      - 23
-      - 22
-      - 21
-      - 20
-      - 19
-      - 18
-      - 17
-      - 16
-      - 15
-      - 14
-      - 13
-      - 12
-      - 11
-      - 10
-      - 9
-      - 8
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _MEDIA-BUS-FMT-RGB161616-1X48:
-
-      - MEDIA_BUS_FMT_RGB161616_1X48
-      - 0x101a
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`15`
-      - r\ :sub:`14`
-      - r\ :sub:`13`
-      - r\ :sub:`12`
-      - r\ :sub:`11`
-      - r\ :sub:`10`
-      - r\ :sub:`9`
-      - r\ :sub:`8`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * -
-      -
-      -
-      - g\ :sub:`15`
-      - g\ :sub:`14`
-      - g\ :sub:`13`
-      - g\ :sub:`12`
-      - g\ :sub:`11`
-      - g\ :sub:`10`
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-      - b\ :sub:`15`
-      - b\ :sub:`14`
-      - b\ :sub:`13`
-      - b\ :sub:`12`
-      - b\ :sub:`11`
-      - b\ :sub:`10`
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-
-.. raw:: latex
-
-    \endgroup
-
-On LVDS buses, usually each sample is transferred serialized in seven
-time slots per pixel clock, on three (18-bit) or four (24-bit)
-differential data pairs at the same time. The remaining bits are used
-for control signals as defined by SPWG/PSWG/VESA or JEIDA standards. The
-24-bit RGB format serialized in seven time slots on four lanes using
-JEIDA defined bit mapping will be named
-``MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA``, for example.
-
-.. raw:: latex
-
-    \tiny
-
-.. _v4l2-mbus-pixelcode-rgb-lvds:
-
-.. flat-table:: LVDS RGB formats
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Identifier
-      - Code
-      -
-      -
-      - :cspan:`3` Data organization
-    * -
-      -
-      - Timeslot
-      - Lane
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _MEDIA-BUS-FMT-RGB666-1X7X3-SPWG:
-
-      - MEDIA_BUS_FMT_RGB666_1X7X3_SPWG
-      - 0x1010
-      - 0
-      -
-      -
-      - d
-      - b\ :sub:`1`
-      - g\ :sub:`0`
-    * -
-      -
-      - 1
-      -
-      -
-      - d
-      - b\ :sub:`0`
-      - r\ :sub:`5`
-    * -
-      -
-      - 2
-      -
-      -
-      - d
-      - g\ :sub:`5`
-      - r\ :sub:`4`
-    * -
-      -
-      - 3
-      -
-      -
-      - b\ :sub:`5`
-      - g\ :sub:`4`
-      - r\ :sub:`3`
-    * -
-      -
-      - 4
-      -
-      -
-      - b\ :sub:`4`
-      - g\ :sub:`3`
-      - r\ :sub:`2`
-    * -
-      -
-      - 5
-      -
-      -
-      - b\ :sub:`3`
-      - g\ :sub:`2`
-      - r\ :sub:`1`
-    * -
-      -
-      - 6
-      -
-      -
-      - b\ :sub:`2`
-      - g\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB888-1X7X4-SPWG:
-
-      - MEDIA_BUS_FMT_RGB888_1X7X4_SPWG
-      - 0x1011
-      - 0
-      -
-      - d
-      - d
-      - b\ :sub:`1`
-      - g\ :sub:`0`
-    * -
-      -
-      - 1
-      -
-      - b\ :sub:`7`
-      - d
-      - b\ :sub:`0`
-      - r\ :sub:`5`
-    * -
-      -
-      - 2
-      -
-      - b\ :sub:`6`
-      - d
-      - g\ :sub:`5`
-      - r\ :sub:`4`
-    * -
-      -
-      - 3
-      -
-      - g\ :sub:`7`
-      - b\ :sub:`5`
-      - g\ :sub:`4`
-      - r\ :sub:`3`
-    * -
-      -
-      - 4
-      -
-      - g\ :sub:`6`
-      - b\ :sub:`4`
-      - g\ :sub:`3`
-      - r\ :sub:`2`
-    * -
-      -
-      - 5
-      -
-      - r\ :sub:`7`
-      - b\ :sub:`3`
-      - g\ :sub:`2`
-      - r\ :sub:`1`
-    * -
-      -
-      - 6
-      -
-      - r\ :sub:`6`
-      - b\ :sub:`2`
-      - g\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB888-1X7X4-JEIDA:
-
-      - MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA
-      - 0x1012
-      - 0
-      -
-      - d
-      - d
-      - b\ :sub:`3`
-      - g\ :sub:`2`
-    * -
-      -
-      - 1
-      -
-      - b\ :sub:`1`
-      - d
-      - b\ :sub:`2`
-      - r\ :sub:`7`
-    * -
-      -
-      - 2
-      -
-      - b\ :sub:`0`
-      - d
-      - g\ :sub:`7`
-      - r\ :sub:`6`
-    * -
-      -
-      - 3
-      -
-      - g\ :sub:`1`
-      - b\ :sub:`7`
-      - g\ :sub:`6`
-      - r\ :sub:`5`
-    * -
-      -
-      - 4
-      -
-      - g\ :sub:`0`
-      - b\ :sub:`6`
-      - g\ :sub:`5`
-      - r\ :sub:`4`
-    * -
-      -
-      - 5
-      -
-      - r\ :sub:`1`
-      - b\ :sub:`5`
-      - g\ :sub:`4`
-      - r\ :sub:`3`
-    * -
-      -
-      - 6
-      -
-      - r\ :sub:`0`
-      - b\ :sub:`4`
-      - g\ :sub:`3`
-      - r\ :sub:`2`
-
-.. raw:: latex
-
-    \normalsize
-
-
-Bayer Formats
-^^^^^^^^^^^^^
-
-Those formats transfer pixel data as red, green and blue components. The
-format code is made of the following information.
-
--  The red, green and blue components order code, as encoded in a pixel
-   sample. The possible values are shown in :ref:`bayer-patterns`.
-
--  The number of bits per pixel component. All components are
-   transferred on the same number of bits. Common values are 8, 10 and
-   12.
-
--  The compression (optional). If the pixel components are ALAW- or
-   DPCM-compressed, a mention of the compression scheme and the number
-   of bits per compressed pixel component.
-
--  The number of bus samples per pixel. Pixels that are wider than the
-   bus width must be transferred in multiple samples. Common values are
-   1 and 2.
-
--  The bus width.
-
--  For formats where the total number of bits per pixel is smaller than
-   the number of bus samples per pixel times the bus width, a padding
-   value stating if the bytes are padded in their most high order bits
-   (PADHI) or low order bits (PADLO).
-
--  For formats where the number of bus samples per pixel is larger than
-   1, an endianness value stating if the pixel is transferred MSB first
-   (BE) or LSB first (LE).
-
-For instance, a format with uncompressed 10-bit Bayer components
-arranged in a red, green, green, blue pattern transferred as 2 8-bit
-samples per pixel with the least significant bits transferred first will
-be named ``MEDIA_BUS_FMT_SRGGB10_2X8_PADHI_LE``.
-
-
-.. _bayer-patterns:
-
-.. kernel-figure:: bayer.svg
-    :alt:    bayer.svg
-    :align:  center
-
-    **Figure 4.8 Bayer Patterns**
-
-The following table lists existing packed Bayer formats. The data
-organization is given as an example for the first pixel only.
-
-
-.. HACK: ideally, we would be using adjustbox here. However, Sphinx
-.. is a very bad behaviored guy: if the table has more than 30 cols,
-.. it switches to long table, and there's no way to override it.
-
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _v4l2-mbus-pixelcode-bayer:
-
-.. cssclass: longtable
-
-.. flat-table:: Bayer Formats
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`15` Data organization
-    * -
-      -
-      - Bit
-      - 15
-      - 14
-      - 13
-      - 12
-      - 11
-      - 10
-      - 9
-      - 8
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _MEDIA-BUS-FMT-SBGGR8-1X8:
-
-      - MEDIA_BUS_FMT_SBGGR8_1X8
-      - 0x3001
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGBRG8-1X8:
-
-      - MEDIA_BUS_FMT_SGBRG8_1X8
-      - 0x3013
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGRBG8-1X8:
-
-      - MEDIA_BUS_FMT_SGRBG8_1X8
-      - 0x3002
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SRGGB8-1X8:
-
-      - MEDIA_BUS_FMT_SRGGB8_1X8
-      - 0x3014
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SBGGR10-ALAW8-1X8:
-
-      - MEDIA_BUS_FMT_SBGGR10_ALAW8_1X8
-      - 0x3015
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGBRG10-ALAW8-1X8:
-
-      - MEDIA_BUS_FMT_SGBRG10_ALAW8_1X8
-      - 0x3016
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGRBG10-ALAW8-1X8:
-
-      - MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8
-      - 0x3017
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SRGGB10-ALAW8-1X8:
-
-      - MEDIA_BUS_FMT_SRGGB10_ALAW8_1X8
-      - 0x3018
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SBGGR10-DPCM8-1X8:
-
-      - MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8
-      - 0x300b
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGBRG10-DPCM8-1X8:
-
-      - MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8
-      - 0x300c
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGRBG10-DPCM8-1X8:
-
-      - MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8
-      - 0x3009
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SRGGB10-DPCM8-1X8:
-
-      - MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8
-      - 0x300d
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SBGGR10-2X8-PADHI-BE:
-
-      - MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_BE
-      - 0x3003
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SBGGR10-2X8-PADHI-LE:
-
-      - MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE
-      - 0x3004
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-    * .. _MEDIA-BUS-FMT-SBGGR10-2X8-PADLO-BE:
-
-      - MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_BE
-      - 0x3005
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-    * .. _MEDIA-BUS-FMT-SBGGR10-2X8-PADLO-LE:
-
-      - MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_LE
-      - 0x3006
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-    * .. _MEDIA-BUS-FMT-SBGGR10-1X10:
-
-      - MEDIA_BUS_FMT_SBGGR10_1X10
-      - 0x3007
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGBRG10-1X10:
-
-      - MEDIA_BUS_FMT_SGBRG10_1X10
-      - 0x300e
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGRBG10-1X10:
-
-      - MEDIA_BUS_FMT_SGRBG10_1X10
-      - 0x300a
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SRGGB10-1X10:
-
-      - MEDIA_BUS_FMT_SRGGB10_1X10
-      - 0x300f
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`9`
-      - r\ :sub:`8`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SBGGR12-1X12:
-
-      - MEDIA_BUS_FMT_SBGGR12_1X12
-      - 0x3008
-      -
-      -
-      -
-      -
-      -
-      - b\ :sub:`11`
-      - b\ :sub:`10`
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGBRG12-1X12:
-
-      - MEDIA_BUS_FMT_SGBRG12_1X12
-      - 0x3010
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`11`
-      - g\ :sub:`10`
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGRBG12-1X12:
-
-      - MEDIA_BUS_FMT_SGRBG12_1X12
-      - 0x3011
-      -
-      -
-      -
-      -
-      -
-      - g\ :sub:`11`
-      - g\ :sub:`10`
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SRGGB12-1X12:
-
-      - MEDIA_BUS_FMT_SRGGB12_1X12
-      - 0x3012
-      -
-      -
-      -
-      -
-      -
-      - r\ :sub:`11`
-      - r\ :sub:`10`
-      - r\ :sub:`9`
-      - r\ :sub:`8`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SBGGR14-1X14:
-
-      - MEDIA_BUS_FMT_SBGGR14_1X14
-      - 0x3019
-      -
-      -
-      -
-      - b\ :sub:`13`
-      - b\ :sub:`12`
-      - b\ :sub:`11`
-      - b\ :sub:`10`
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGBRG14-1X14:
-
-      - MEDIA_BUS_FMT_SGBRG14_1X14
-      - 0x301a
-      -
-      -
-      -
-      - g\ :sub:`13`
-      - g\ :sub:`12`
-      - g\ :sub:`11`
-      - g\ :sub:`10`
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGRBG14-1X14:
-
-      - MEDIA_BUS_FMT_SGRBG14_1X14
-      - 0x301b
-      -
-      -
-      -
-      - g\ :sub:`13`
-      - g\ :sub:`12`
-      - g\ :sub:`11`
-      - g\ :sub:`10`
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SRGGB14-1X14:
-
-      - MEDIA_BUS_FMT_SRGGB14_1X14
-      - 0x301c
-      -
-      -
-      -
-      - r\ :sub:`13`
-      - r\ :sub:`12`
-      - r\ :sub:`11`
-      - r\ :sub:`10`
-      - r\ :sub:`9`
-      - r\ :sub:`8`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SBGGR16-1X16:
-
-      - MEDIA_BUS_FMT_SBGGR16_1X16
-      - 0x301d
-      -
-      - b\ :sub:`15`
-      - b\ :sub:`14`
-      - b\ :sub:`13`
-      - b\ :sub:`12`
-      - b\ :sub:`11`
-      - b\ :sub:`10`
-      - b\ :sub:`9`
-      - b\ :sub:`8`
-      - b\ :sub:`7`
-      - b\ :sub:`6`
-      - b\ :sub:`5`
-      - b\ :sub:`4`
-      - b\ :sub:`3`
-      - b\ :sub:`2`
-      - b\ :sub:`1`
-      - b\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGBRG16-1X16:
-
-      - MEDIA_BUS_FMT_SGBRG16_1X16
-      - 0x301e
-      -
-      - g\ :sub:`15`
-      - g\ :sub:`14`
-      - g\ :sub:`13`
-      - g\ :sub:`12`
-      - g\ :sub:`11`
-      - g\ :sub:`10`
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SGRBG16-1X16:
-
-      - MEDIA_BUS_FMT_SGRBG16_1X16
-      - 0x301f
-      -
-      - g\ :sub:`15`
-      - g\ :sub:`14`
-      - g\ :sub:`13`
-      - g\ :sub:`12`
-      - g\ :sub:`11`
-      - g\ :sub:`10`
-      - g\ :sub:`9`
-      - g\ :sub:`8`
-      - g\ :sub:`7`
-      - g\ :sub:`6`
-      - g\ :sub:`5`
-      - g\ :sub:`4`
-      - g\ :sub:`3`
-      - g\ :sub:`2`
-      - g\ :sub:`1`
-      - g\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-SRGGB16-1X16:
-
-      - MEDIA_BUS_FMT_SRGGB16_1X16
-      - 0x3020
-      -
-      - r\ :sub:`15`
-      - r\ :sub:`14`
-      - r\ :sub:`13`
-      - r\ :sub:`12`
-      - r\ :sub:`11`
-      - r\ :sub:`10`
-      - r\ :sub:`9`
-      - r\ :sub:`8`
-      - r\ :sub:`7`
-      - r\ :sub:`6`
-      - r\ :sub:`5`
-      - r\ :sub:`4`
-      - r\ :sub:`3`
-      - r\ :sub:`2`
-      - r\ :sub:`1`
-      - r\ :sub:`0`
-
-.. raw:: latex
-
-    \endgroup
-
-
-Packed YUV Formats
-^^^^^^^^^^^^^^^^^^
-
-Those data formats transfer pixel data as (possibly downsampled) Y, U
-and V components. Some formats include dummy bits in some of their
-samples and are collectively referred to as "YDYC" (Y-Dummy-Y-Chroma)
-formats. One cannot rely on the values of these dummy bits as those are
-undefined.
-
-The format code is made of the following information.
-
--  The Y, U and V components order code, as transferred on the bus.
-   Possible values are YUYV, UYVY, YVYU and VYUY for formats with no
-   dummy bit, and YDYUYDYV, YDYVYDYU, YUYDYVYD and YVYDYUYD for YDYC
-   formats.
-
--  The number of bits per pixel component. All components are
-   transferred on the same number of bits. Common values are 8, 10 and
-   12.
-
--  The number of bus samples per pixel. Pixels that are wider than the
-   bus width must be transferred in multiple samples. Common values are
-   0.5 (encoded as 0_5; in this case two pixels are transferred per bus
-   sample), 1, 1.5 (encoded as 1_5) and 2.
-
--  The bus width. When the bus width is larger than the number of bits
-   per pixel component, several components are packed in a single bus
-   sample. The components are ordered as specified by the order code,
-   with components on the left of the code transferred in the high order
-   bits. Common values are 8 and 16.
-
-For instance, a format where pixels are encoded as 8-bit YUV values
-downsampled to 4:2:2 and transferred as 2 8-bit bus samples per pixel in
-the U, Y, V, Y order will be named ``MEDIA_BUS_FMT_UYVY8_2X8``.
-
-:ref:`v4l2-mbus-pixelcode-yuv8` lists existing packed YUV formats and
-describes the organization of each pixel data in each sample. When a
-format pattern is split across multiple samples each of the samples in
-the pattern is described.
-
-The role of each bit transferred over the bus is identified by one of
-the following codes.
-
--  y\ :sub:`x` for luma component bit number x
-
--  u\ :sub:`x` for blue chroma component bit number x
-
--  v\ :sub:`x` for red chroma component bit number x
-
--  a\ :sub:`x` for alpha component bit number x
-
-- for non-available bits (for positions higher than the bus width)
-
--  d for dummy bits
-
-.. HACK: ideally, we would be using adjustbox here. However, this
-.. will never work for this table, as, even with tiny font, it is
-.. to big for a single page. So, we need to manually adjust the
-.. size.
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _v4l2-mbus-pixelcode-yuv8:
-
-.. flat-table:: YUV Formats
-    :header-rows:  2
-    :stub-columns: 0
-    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`31` Data organization
-    * -
-      -
-      - Bit
-      - 31
-      - 30
-      - 29
-      - 28
-      - 27
-      - 26
-      - 25
-      - 24
-      - 23
-      - 22
-      - 21
-      - 10
-      - 19
-      - 18
-      - 17
-      - 16
-      - 15
-      - 14
-      - 13
-      - 12
-      - 11
-      - 10
-      - 9
-      - 8
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _MEDIA-BUS-FMT-Y8-1X8:
-
-      - MEDIA_BUS_FMT_Y8_1X8
-      - 0x2001
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UV8-1X8:
-
-      - MEDIA_BUS_FMT_UV8_1X8
-      - 0x2015
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY8-1_5X8:
-
-      - MEDIA_BUS_FMT_UYVY8_1_5X8
-      - 0x2002
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY8-1_5X8:
-
-      - MEDIA_BUS_FMT_VYUY8_1_5X8
-      - 0x2003
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV8-1_5X8:
-
-      - MEDIA_BUS_FMT_YUYV8_1_5X8
-      - 0x2004
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU8-1_5X8:
-
-      - MEDIA_BUS_FMT_YVYU8_1_5X8
-      - 0x2005
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY8-2X8:
-
-      - MEDIA_BUS_FMT_UYVY8_2X8
-      - 0x2006
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY8-2X8:
-
-      - MEDIA_BUS_FMT_VYUY8_2X8
-      - 0x2007
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV8-2X8:
-
-      - MEDIA_BUS_FMT_YUYV8_2X8
-      - 0x2008
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU8-2X8:
-
-      - MEDIA_BUS_FMT_YVYU8_2X8
-      - 0x2009
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-Y10-1X10:
-
-      - MEDIA_BUS_FMT_Y10_1X10
-      - 0x200a
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-Y10-2X8-PADHI_LE:
-
-      - MEDIA_BUS_FMT_Y10_2X8_PADHI_LE
-      - 0x202c
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - 0
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-    * .. _MEDIA-BUS-FMT-UYVY10-2X10:
-
-      - MEDIA_BUS_FMT_UYVY10_2X10
-      - 0x2018
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY10-2X10:
-
-      - MEDIA_BUS_FMT_VYUY10_2X10
-      - 0x2019
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV10-2X10:
-
-      - MEDIA_BUS_FMT_YUYV10_2X10
-      - 0x200b
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU10-2X10:
-
-      - MEDIA_BUS_FMT_YVYU10_2X10
-      - 0x200c
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-Y12-1X12:
-
-      - MEDIA_BUS_FMT_Y12_1X12
-      - 0x2013
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY12-2X12:
-
-      - MEDIA_BUS_FMT_UYVY12_2X12
-      - 0x201c
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY12-2X12:
-
-      - MEDIA_BUS_FMT_VYUY12_2X12
-      - 0x201d
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV12-2X12:
-
-      - MEDIA_BUS_FMT_YUYV12_2X12
-      - 0x201e
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU12-2X12:
-
-      - MEDIA_BUS_FMT_YVYU12_2X12
-      - 0x201f
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-Y14-1X14:
-
-      - MEDIA_BUS_FMT_Y14_1X14
-      - 0x202d
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`13`
-      - y\ :sub:`12`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY8-1X16:
-
-      - MEDIA_BUS_FMT_UYVY8_1X16
-      - 0x200f
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY8-1X16:
-
-      - MEDIA_BUS_FMT_VYUY8_1X16
-      - 0x2010
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV8-1X16:
-
-      - MEDIA_BUS_FMT_YUYV8_1X16
-      - 0x2011
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU8-1X16:
-
-      - MEDIA_BUS_FMT_YVYU8_1X16
-      - 0x2012
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YDYUYDYV8-1X16:
-
-      - MEDIA_BUS_FMT_YDYUYDYV8_1X16
-      - 0x2014
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY10-1X20:
-
-      - MEDIA_BUS_FMT_UYVY10_1X20
-      - 0x201a
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY10-1X20:
-
-      - MEDIA_BUS_FMT_VYUY10_1X20
-      - 0x201b
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV10-1X20:
-
-      - MEDIA_BUS_FMT_YUYV10_1X20
-      - 0x200d
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU10-1X20:
-
-      - MEDIA_BUS_FMT_YVYU10_1X20
-      - 0x200e
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VUY8-1X24:
-
-      - MEDIA_BUS_FMT_VUY8_1X24
-      - 0x201a
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUV8-1X24:
-
-      - MEDIA_BUS_FMT_YUV8_1X24
-      - 0x2025
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYYVYY8-0-5X24:
-
-      - MEDIA_BUS_FMT_UYYVYY8_0_5X24
-      - 0x2026
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY12-1X24:
-
-      - MEDIA_BUS_FMT_UYVY12_1X24
-      - 0x2020
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY12-1X24:
-
-      - MEDIA_BUS_FMT_VYUY12_1X24
-      - 0x2021
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV12-1X24:
-
-      - MEDIA_BUS_FMT_YUYV12_1X24
-      - 0x2022
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU12-1X24:
-
-      - MEDIA_BUS_FMT_YVYU12_1X24
-      - 0x2023
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUV10-1X30:
-
-      - MEDIA_BUS_FMT_YUV10_1X30
-      - 0x2016
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYYVYY10-0-5X30:
-
-      - MEDIA_BUS_FMT_UYYVYY10_0_5X30
-      - 0x2027
-      -
-      -
-      -
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-AYUV8-1X32:
-
-      - MEDIA_BUS_FMT_AYUV8_1X32
-      - 0x2017
-      -
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-
-
-.. raw:: latex
-
-	\endgroup
-
-
-The following table list existing packed 36bit wide YUV formats.
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _v4l2-mbus-pixelcode-yuv8-36bit:
-
-.. flat-table:: 36bit YUV Formats
-    :header-rows:  2
-    :stub-columns: 0
-    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`35` Data organization
-    * -
-      -
-      - Bit
-      - 35
-      - 34
-      - 33
-      - 32
-      - 31
-      - 30
-      - 29
-      - 28
-      - 27
-      - 26
-      - 25
-      - 24
-      - 23
-      - 22
-      - 21
-      - 10
-      - 19
-      - 18
-      - 17
-      - 16
-      - 15
-      - 14
-      - 13
-      - 12
-      - 11
-      - 10
-      - 9
-      - 8
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _MEDIA-BUS-FMT-UYYVYY12-0-5X36:
-
-      - MEDIA_BUS_FMT_UYYVYY12_0_5X36
-      - 0x2028
-      -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUV12-1X36:
-
-      - MEDIA_BUS_FMT_YUV12_1X36
-      - 0x2029
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-
-
-.. raw:: latex
-
-	\endgroup
-
-
-The following table list existing packed 48bit wide YUV formats.
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _v4l2-mbus-pixelcode-yuv8-48bit:
-
-.. flat-table:: 48bit YUV Formats
-    :header-rows:  3
-    :stub-columns: 0
-    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`31` Data organization
-    * -
-      -
-      - Bit
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - 47
-      - 46
-      - 45
-      - 44
-      - 43
-      - 42
-      - 41
-      - 40
-      - 39
-      - 38
-      - 37
-      - 36
-      - 35
-      - 34
-      - 33
-      - 32
-    * -
-      -
-      -
-      - 31
-      - 30
-      - 29
-      - 28
-      - 27
-      - 26
-      - 25
-      - 24
-      - 23
-      - 22
-      - 21
-      - 10
-      - 19
-      - 18
-      - 17
-      - 16
-      - 15
-      - 14
-      - 13
-      - 12
-      - 11
-      - 10
-      - 9
-      - 8
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _MEDIA-BUS-FMT-YUV16-1X48:
-
-      - MEDIA_BUS_FMT_YUV16_1X48
-      - 0x202a
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`15`
-      - y\ :sub:`14`
-      - y\ :sub:`13`
-      - y\ :sub:`12`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`8`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      - u\ :sub:`15`
-      - u\ :sub:`14`
-      - u\ :sub:`13`
-      - u\ :sub:`12`
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - v\ :sub:`15`
-      - v\ :sub:`14`
-      - v\ :sub:`13`
-      - v\ :sub:`12`
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYYVYY16-0-5X48:
-
-      - MEDIA_BUS_FMT_UYYVYY16_0_5X48
-      - 0x202b
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`15`
-      - u\ :sub:`14`
-      - u\ :sub:`13`
-      - u\ :sub:`12`
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * -
-      -
-      -
-      - y\ :sub:`15`
-      - y\ :sub:`14`
-      - y\ :sub:`13`
-      - y\ :sub:`12`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - y\ :sub:`15`
-      - y\ :sub:`14`
-      - y\ :sub:`13`
-      - y\ :sub:`12`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`8`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`15`
-      - v\ :sub:`14`
-      - v\ :sub:`13`
-      - v\ :sub:`12`
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
-      -
-      -
-      - y\ :sub:`15`
-      - y\ :sub:`14`
-      - y\ :sub:`13`
-      - y\ :sub:`12`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - y\ :sub:`15`
-      - y\ :sub:`14`
-      - y\ :sub:`13`
-      - y\ :sub:`12`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`8`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-
-
-.. raw:: latex
-
-	\endgroup
-
-HSV/HSL Formats
-^^^^^^^^^^^^^^^
-
-Those formats transfer pixel data as RGB values in a
-cylindrical-coordinate system using Hue-Saturation-Value or
-Hue-Saturation-Lightness components. The format code is made of the
-following information.
-
--  The hue, saturation, value or lightness and optional alpha components
-   order code, as encoded in a pixel sample. The only currently
-   supported value is AHSV.
-
--  The number of bits per component, for each component. The values can
-   be different for all components. The only currently supported value
-   is 8888.
-
--  The number of bus samples per pixel. Pixels that are wider than the
-   bus width must be transferred in multiple samples. The only currently
-   supported value is 1.
-
--  The bus width.
-
--  For formats where the total number of bits per pixel is smaller than
-   the number of bus samples per pixel times the bus width, a padding
-   value stating if the bytes are padded in their most high order bits
-   (PADHI) or low order bits (PADLO).
-
--  For formats where the number of bus samples per pixel is larger than
-   1, an endianness value stating if the pixel is transferred MSB first
-   (BE) or LSB first (LE).
-
-The following table lists existing HSV/HSL formats.
-
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{3.9cm}|p{0.73cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
-
-.. _v4l2-mbus-pixelcode-hsv:
-
-.. flat-table:: HSV/HSL formats
-    :header-rows:  2
-    :stub-columns: 0
-    :widths: 28 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-
-    * - Identifier
-      - Code
-      -
-      - :cspan:`31` Data organization
-    * -
-      -
-      - Bit
-      - 31
-      - 30
-      - 29
-      - 28
-      - 27
-      - 26
-      - 25
-      - 24
-      - 23
-      - 22
-      - 21
-      - 20
-      - 19
-      - 18
-      - 17
-      - 16
-      - 15
-      - 14
-      - 13
-      - 12
-      - 11
-      - 10
-      - 9
-      - 8
-      - 7
-      - 6
-      - 5
-      - 4
-      - 3
-      - 2
-      - 1
-      - 0
-    * .. _MEDIA-BUS-FMT-AHSV8888-1X32:
-
-      - MEDIA_BUS_FMT_AHSV8888_1X32
-      - 0x6001
-      -
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-      - h\ :sub:`7`
-      - h\ :sub:`6`
-      - h\ :sub:`5`
-      - h\ :sub:`4`
-      - h\ :sub:`3`
-      - h\ :sub:`2`
-      - h\ :sub:`1`
-      - h\ :sub:`0`
-      - s\ :sub:`7`
-      - s\ :sub:`6`
-      - s\ :sub:`5`
-      - s\ :sub:`4`
-      - s\ :sub:`3`
-      - s\ :sub:`2`
-      - s\ :sub:`1`
-      - s\ :sub:`0`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-
-.. raw:: latex
-
-    \normalsize
-
-
-JPEG Compressed Formats
-^^^^^^^^^^^^^^^^^^^^^^^
-
-Those data formats consist of an ordered sequence of 8-bit bytes
-obtained from JPEG compression process. Additionally to the ``_JPEG``
-postfix the format code is made of the following information.
-
--  The number of bus samples per entropy encoded byte.
-
--  The bus width.
-
-For instance, for a JPEG baseline process and an 8-bit bus width the
-format will be named ``MEDIA_BUS_FMT_JPEG_1X8``.
-
-The following table lists existing JPEG compressed formats.
-
-
-.. _v4l2-mbus-pixelcode-jpeg:
-
-.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{10.1cm}|
-
-.. flat-table:: JPEG Formats
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Identifier
-      - Code
-      - Remarks
-    * .. _MEDIA-BUS-FMT-JPEG-1X8:
-
-      - MEDIA_BUS_FMT_JPEG_1X8
-      - 0x4001
-      - Besides of its usage for the parallel bus this format is
-	recommended for transmission of JPEG data over MIPI CSI bus using
-	the User Defined 8-bit Data types.
-
-
-
-.. _v4l2-mbus-vendor-spec-fmts:
-
-Vendor and Device Specific Formats
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-This section lists complex data formats that are either vendor or device
-specific.
-
-The following table lists the existing vendor and device specific
-formats.
-
-
-.. _v4l2-mbus-pixelcode-vendor-specific:
-
-.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}|
-
-.. flat-table:: Vendor and device specific formats
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Identifier
-      - Code
-      - Comments
-    * .. _MEDIA-BUS-FMT-S5C-UYVY-JPEG-1X8:
-
-      - MEDIA_BUS_FMT_S5C_UYVY_JPEG_1X8
-      - 0x5001
-      - Interleaved raw UYVY and JPEG image format with embedded meta-data
-	used by Samsung S3C73MX camera sensors.
diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg b/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg
deleted file mode 100644
index 59321e09929d..000000000000
--- a/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg
+++ /dev/null
@@ -1,312 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="42.799767cm"
-   height="9.9348345cm"
-   viewBox="-194 128 840.06984 194.72276"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="subdev-image-processing-crop.svg">
-  <metadata
-     id="metadata100">
-    <rdf:RDF>
-      <cc:Work
-	 rdf:about="">
-	<dc:format>image/svg+xml</dc:format>
-	<dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-	<dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <defs
-     id="defs98" />
-  <sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview96"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:zoom="0.3649199"
-     inkscape:cx="764.40286"
-     inkscape:cy="176.91347"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg2" />
-  <rect
-     style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-     x="-9.6002426"
-     y="128.86047"
-     width="469.77399"
-     height="193"
-     id="rect4" />
-  <g
-     id="g6"
-     transform="translate(-1.6002426,-1.1395339)">
-    <rect
-       style="fill:#ffffff"
-       x="4.5"
-       y="189"
-       width="159"
-       height="104"
-       id="rect8" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#a52a2a;stroke-width:2"
-       x="4.5"
-       y="189"
-       width="159"
-       height="104"
-       id="rect10" />
-  </g>
-  <g
-     id="g12"
-     transform="translate(-1.6002426,-1.1395339)">
-    <rect
-       style="fill:#ffffff"
-       x="63.5"
-       y="211"
-       width="94"
-       height="77"
-       id="rect14" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
-       x="63.5"
-       y="211"
-       width="94"
-       height="77"
-       id="rect16" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#0000ff"
-     x="72.899757"
-     y="226.61047"
-     id="text18">
-    <tspan
-       x="72.899757"
-       y="226.61047"
-       id="tspan20">sink</tspan>
-    <tspan
-       x="72.899757"
-       y="242.61047"
-       id="tspan22">crop</tspan>
-    <tspan
-       x="72.899757"
-       y="258.61047"
-       id="tspan24">selection</tspan>
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="27.899757"
-     y="156.86047"
-     id="text26">
-    <tspan
-       x="27.899757"
-       y="156.86047"
-       id="tspan28" />
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a52a2a"
-     x="6.938117"
-     y="156.77448"
-     id="text30">
-    <tspan
-       x="6.938117"
-       y="156.77448"
-       id="tspan32">sink media</tspan>
-    <tspan
-       x="6.938117"
-       y="172.77448"
-       id="tspan34">bus format</tspan>
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#8b6914"
-     x="348.17374"
-     y="153.86047"
-     id="text36">
-    <tspan
-       x="348.17374"
-       y="153.86047"
-       id="tspan38">source media</tspan>
-    <tspan
-       x="348.17374"
-       y="169.86047"
-       id="tspan40">bus format</tspan>
-  </text>
-  <g
-     id="g42"
-     transform="translate(-1.6002426,-1.1395339)">
-    <rect
-       style="fill:#ffffff"
-       x="350.48801"
-       y="190.834"
-       width="93.286301"
-       height="75.166"
-       id="rect44" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
-       x="350.48801"
-       y="190.834"
-       width="93.286301"
-       height="75.166"
-       id="rect46" />
-  </g>
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="348.88776"
-     y1="264.86047"
-     x2="61.899757"
-     y2="286.86047"
-     id="line48" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="348.88776"
-     y1="189.69447"
-     x2="61.899757"
-     y2="209.86047"
-     id="line50" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="442.17374"
-     y1="264.86047"
-     x2="155.89977"
-     y2="286.86047"
-     id="line52" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="442.17374"
-     y1="189.69447"
-     x2="155.89977"
-     y2="209.86047"
-     id="line54" />
-  <g
-     id="g56"
-     transform="translate(-1.6002426,-1.1395339)">
-    <circle
-       style="fill:#ffffff"
-       cx="473.10001"
-       cy="219.98399"
-       id="ellipse58"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="473.10001"
-       cy="219.98399"
-       id="ellipse60"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="473.10001"
-       cy="219.98399"
-       id="ellipse62"
-       r="8.5" />
-  </g>
-  <g
-     id="g64"
-     transform="translate(-1.6002426,-1.1395339)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       x1="481.60001"
-       y1="219.98399"
-       x2="637.93402"
-       y2="220.01199"
-       id="line66" />
-    <polygon
-       style="fill:#000000"
-       points="635.435,215.012 645.434,220.014 635.433,225.012 637.934,220.012 "
-       id="polygon68" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       points="635.435,215.012 645.434,220.014 635.433,225.012 637.934,220.012 "
-       id="polygon70" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="505.30774"
-     y="208.66048"
-     id="text72">
-    <tspan
-       x="505.30774"
-       y="208.66048"
-       id="tspan74">pad 1 (source)</tspan>
-  </text>
-  <g
-     id="g76"
-     transform="translate(-1.6002426,-1.1395339)">
-    <circle
-       style="fill:#ffffff"
-       cx="-20.398199"
-       cy="241.51199"
-       id="ellipse78"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="-20.398199"
-       cy="241.51199"
-       id="ellipse80"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="-20.398199"
-       cy="241.51199"
-       id="ellipse82"
-       r="8.5" />
-  </g>
-  <g
-     id="g84"
-     transform="translate(-1.6002426,-1.1395339)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       x1="-192.39799"
-       y1="241.8"
-       x2="-38.6343"
-       y2="241.52901"
-       id="line86" />
-    <polygon
-       style="fill:#000000"
-       points="-41.1431,236.534 -31.1343,241.516 -41.1254,246.534 -38.6343,241.529 "
-       id="polygon88" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       points="-41.1431,236.534 -31.1343,241.516 -41.1254,246.534 -38.6343,241.529 "
-       id="polygon90" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="-149.45824"
-     y="228.66048"
-     id="text92">
-    <tspan
-       x="-149.45824"
-       y="228.66048"
-       id="tspan94">pad 0 (sink)</tspan>
-  </text>
-</svg>
diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-full.svg b/Documentation/media/uapi/v4l/subdev-image-processing-full.svg
deleted file mode 100644
index e739c54fbbfb..000000000000
--- a/Documentation/media/uapi/v4l/subdev-image-processing-full.svg
+++ /dev/null
@@ -1,752 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="58.825298cm"
-   height="17.279287cm"
-   viewBox="-186 71 1174.5119 332.1463"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="subdev-image-processing-full.svg">
-  <metadata
-     id="metadata260">
-    <rdf:RDF>
-      <cc:Work
-	 rdf:about="">
-	<dc:format>image/svg+xml</dc:format>
-	<dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-	<dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <defs
-     id="defs258" />
-  <sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview256"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:zoom="0.26595857"
-     inkscape:cx="1050.1367"
-     inkscape:cy="307.01645"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg2" />
-  <g
-     id="g4"
-     transform="translate(-1.4982376,-7.6949076)">
-    <rect
-       style="fill:#ffffff"
-       x="318.89999"
-       y="129"
-       width="208.10001"
-       height="249"
-       id="rect6" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#ff765a;stroke-width:2"
-       x="318.89999"
-       y="129"
-       width="208.10001"
-       height="249"
-       id="rect8" />
-  </g>
-  <rect
-     style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-     x="-3.4982376"
-     y="65.305092"
-     width="806"
-     height="343"
-     id="rect10" />
-  <g
-     id="g12"
-     transform="translate(-1.4982376,-7.6949076)">
-    <circle
-       style="fill:#ffffff"
-       cx="-12.5"
-       cy="166.71201"
-       id="ellipse14"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="-12.5"
-       cy="166.71201"
-       id="ellipse16"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="-12.5"
-       cy="166.71201"
-       id="ellipse18"
-       r="8.5" />
-  </g>
-  <g
-     id="g20"
-     transform="translate(-1.4982376,-7.6949076)">
-    <circle
-       style="fill:#ffffff"
-       cx="815.23199"
-       cy="205.18401"
-       id="ellipse22"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="815.23199"
-       cy="205.18401"
-       id="ellipse24"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="815.23199"
-       cy="205.18401"
-       id="ellipse26"
-       r="8.5" />
-  </g>
-  <g
-     id="g28"
-     transform="translate(-1.4982376,-7.6949076)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       x1="-184.5"
-       y1="167"
-       x2="-30.736099"
-       y2="166.729"
-       id="line30" />
-    <polygon
-       style="fill:#000000"
-       points="-33.2449,161.734 -23.2361,166.716 -33.2272,171.734 -30.7361,166.729 "
-       id="polygon32" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       points="-33.2449,161.734 -23.2361,166.716 -33.2272,171.734 -30.7361,166.729 "
-       id="polygon34" />
-  </g>
-  <g
-     id="g36"
-     transform="translate(-1.4982376,-7.6949076)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       x1="823.73199"
-       y1="205.18401"
-       x2="980.06598"
-       y2="205.21201"
-       id="line38" />
-    <polygon
-       style="fill:#000000"
-       points="977.567,200.212 987.566,205.214 977.565,210.212 980.066,205.212 "
-       id="polygon40" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       points="977.567,200.212 987.566,205.214 977.565,210.212 980.066,205.212 "
-       id="polygon42" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="-141.45824"
-     y="147.3051"
-     id="text44">
-    <tspan
-       x="-141.45824"
-       y="147.3051"
-       id="tspan46">pad 0 (sink)</tspan>
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="847.54175"
-     y="187.3051"
-     id="text48">
-    <tspan
-       x="847.54175"
-       y="187.3051"
-       id="tspan50">pad 2 (source)</tspan>
-  </text>
-  <g
-     id="g52"
-     transform="translate(-1.4982376,-7.6949076)">
-    <rect
-       style="fill:#ffffff"
-       x="5.5"
-       y="120"
-       width="159"
-       height="104"
-       id="rect54" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#a52a2a;stroke-width:2"
-       x="5.5"
-       y="120"
-       width="159"
-       height="104"
-       id="rect56" />
-  </g>
-  <g
-     id="g58"
-     transform="translate(-1.4982376,-7.6949076)">
-    <rect
-       style="fill:#ffffff"
-       x="62.5"
-       y="136"
-       width="94"
-       height="77"
-       id="rect60" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
-       x="62.5"
-       y="136"
-       width="94"
-       height="77"
-       id="rect62" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="29.001762"
-     y="81.305092"
-     id="text64">
-    <tspan
-       x="29.001762"
-       y="81.305092"
-       id="tspan66" />
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a52a2a"
-     x="8.040122"
-     y="81.218895"
-     id="text68">
-    <tspan
-       x="8.040122"
-       y="81.218895"
-       id="tspan70">sink media</tspan>
-    <tspan
-       x="8.040122"
-       y="97.219093"
-       id="tspan72">bus format</tspan>
-  </text>
-  <g
-     id="g74"
-     transform="translate(-1.4982376,-7.6949076)">
-    <rect
-       style="fill:#ffffff"
-       x="333.64401"
-       y="185.64999"
-       width="165.2"
-       height="172.478"
-       id="rect76" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#00ff00;stroke-width:2"
-       x="333.64401"
-       y="185.64999"
-       width="165.2"
-       height="172.478"
-       id="rect78" />
-  </g>
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="332.14578"
-     y1="350.43307"
-     x2="61.001762"
-     y2="205.3051"
-     id="line80" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="332.14578"
-     y1="177.95509"
-     x2="61.001762"
-     y2="128.3051"
-     id="line82" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="497.34576"
-     y1="350.43307"
-     x2="155.00177"
-     y2="205.3051"
-     id="line84" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="497.34576"
-     y1="177.95509"
-     x2="155.00177"
-     y2="128.3051"
-     id="line86" />
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#00ff00"
-     x="333.20578"
-     y="141.7471"
-     id="text88">
-    <tspan
-       x="333.20578"
-       y="141.7471"
-       id="tspan90">sink compose</tspan>
-    <tspan
-       x="333.20578"
-       y="157.7471"
-       id="tspan92">selection (scaling)</tspan>
-  </text>
-  <g
-     id="g94"
-     transform="translate(-1.4982376,-7.6949076)">
-    <rect
-       style="fill:#ffffff"
-       x="409.32199"
-       y="194.565"
-       width="100.186"
-       height="71.452301"
-       id="rect96" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       x="409.32199"
-       y="194.565"
-       width="100.186"
-       height="71.452301"
-       id="rect98" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#8b6914"
-     x="688.00177"
-     y="97.43309"
-     id="text100">
-    <tspan
-       x="688.00177"
-       y="97.43309"
-       id="tspan102">source media</tspan>
-    <tspan
-       x="688.00177"
-       y="113.43309"
-       id="tspan104">bus format</tspan>
-  </text>
-  <g
-     id="g106"
-     transform="translate(-1.4982376,-7.6949076)">
-    <rect
-       style="fill:#ffffff"
-       x="688.48798"
-       y="173.834"
-       width="100.186"
-       height="71.452301"
-       id="rect108" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
-       x="688.48798"
-       y="173.834"
-       width="100.186"
-       height="71.452301"
-       id="rect110" />
-  </g>
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="686.98975"
-     y1="237.59109"
-     x2="407.82376"
-     y2="258.32309"
-     id="line112" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="686.98975"
-     y1="166.1391"
-     x2="407.82376"
-     y2="186.8701"
-     id="line114" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="787.17578"
-     y1="237.59109"
-     x2="508.00977"
-     y2="258.32309"
-     id="line116" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="787.17578"
-     y1="166.1391"
-     x2="508.00977"
-     y2="186.8701"
-     id="line118" />
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#ff765a"
-     x="323.50177"
-     y="95.305092"
-     id="text120">
-    <tspan
-       x="323.50177"
-       y="95.305092"
-       id="tspan122">sink compose</tspan>
-    <tspan
-       x="323.50177"
-       y="111.30509"
-       id="tspan124">bounds selection</tspan>
-  </text>
-  <g
-     id="g126"
-     transform="translate(-1.4982376,-7.6949076)">
-    <circle
-       style="fill:#ffffff"
-       cx="-12.0982"
-       cy="341.51199"
-       id="ellipse128"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="-12.0982"
-       cy="341.51199"
-       id="ellipse130"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="-12.0982"
-       cy="341.51199"
-       id="ellipse132"
-       r="8.5" />
-  </g>
-  <g
-     id="g134"
-     transform="translate(-1.4982376,-7.6949076)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       x1="-184.09801"
-       y1="341.79999"
-       x2="-30.334299"
-       y2="341.52899"
-       id="line136" />
-    <polygon
-       style="fill:#000000"
-       points="-32.8431,336.534 -22.8343,341.516 -32.8254,346.534 -30.3343,341.529 "
-       id="polygon138" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       points="-32.8431,336.534 -22.8343,341.516 -32.8254,346.534 -30.3343,341.529 "
-       id="polygon140" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="-140.49823"
-     y="321.30508"
-     id="text142">
-    <tspan
-       x="-140.49823"
-       y="321.30508"
-       id="tspan144">pad 1 (sink)</tspan>
-  </text>
-  <g
-     id="g146"
-     transform="translate(-1.4982376,-7.6949076)">
-    <rect
-       style="fill:#ffffff"
-       x="7.8082399"
-       y="292.79999"
-       width="112.092"
-       height="82.199997"
-       id="rect148" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#a52a2a;stroke-width:2"
-       x="7.8082399"
-       y="292.79999"
-       width="112.092"
-       height="82.199997"
-       id="rect150" />
-  </g>
-  <g
-     id="g152"
-     transform="translate(-1.4982376,-7.6949076)">
-    <rect
-       style="fill:#ffffff"
-       x="52.900002"
-       y="314.79999"
-       width="58.099998"
-       height="50.200001"
-       id="rect154" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
-       x="52.900002"
-       y="314.79999"
-       width="58.099998"
-       height="50.200001"
-       id="rect156" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="30.401762"
-     y="252.10509"
-     id="text158">
-    <tspan
-       x="30.401762"
-       y="252.10509"
-       id="tspan160" />
-  </text>
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="357.40176"
-     y1="244.20509"
-     x2="51.401764"
-     y2="307.10507"
-     id="line162" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="357.40176"
-     y1="308.30508"
-     x2="51.401764"
-     y2="357.30508"
-     id="line164" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="432.50177"
-     y1="308.30508"
-     x2="109.50176"
-     y2="357.30508"
-     id="line166" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="432.50177"
-     y1="244.20509"
-     x2="109.50176"
-     y2="307.10507"
-     id="line168" />
-  <rect
-     style="fill:none;fill-opacity:0;stroke:#00ff00;stroke-width:2"
-     x="357.40176"
-     y="244.20509"
-     width="75.099998"
-     height="64.099998"
-     id="rect170" />
-  <rect
-     style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-     x="441.76376"
-     y="276.77109"
-     width="64.737999"
-     height="48.534"
-     id="rect172" />
-  <g
-     id="g174"
-     transform="translate(-1.4982376,-7.6949076)">
-    <rect
-       style="fill:#ffffff"
-       x="693.42798"
-       y="324.73401"
-       width="63.571999"
-       height="49.265999"
-       id="rect176" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
-       x="693.42798"
-       y="324.73401"
-       width="63.571999"
-       height="49.265999"
-       id="rect178" />
-  </g>
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="691.92975"
-     y1="366.30508"
-     x2="441.76376"
-     y2="325.30508"
-     id="line180" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="691.92975"
-     y1="317.03909"
-     x2="441.76376"
-     y2="276.77109"
-     id="line182" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="755.50177"
-     y1="366.30508"
-     x2="506.50177"
-     y2="325.30508"
-     id="line184" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="755.50177"
-     y1="317.03909"
-     x2="506.50177"
-     y2="276.77109"
-     id="line186" />
-  <g
-     id="g188"
-     transform="translate(-1.4982376,-7.6949076)">
-    <circle
-       style="fill:#ffffff"
-       cx="815.44"
-       cy="343.98401"
-       id="ellipse190"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="815.44"
-       cy="343.98401"
-       id="ellipse192"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="815.44"
-       cy="343.98401"
-       id="ellipse194"
-       r="8.5" />
-  </g>
-  <g
-     id="g196"
-     transform="translate(-1.4982376,-7.6949076)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       x1="823.94"
-       y1="343.98401"
-       x2="980.27399"
-       y2="344.01199"
-       id="line198" />
-    <polygon
-       style="fill:#000000"
-       points="977.775,339.012 987.774,344.014 977.773,349.012 980.274,344.012 "
-       id="polygon200" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       points="977.775,339.012 987.774,344.014 977.773,349.012 980.274,344.012 "
-       id="polygon202" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="847.74976"
-     y="326.10507"
-     id="text204">
-    <tspan
-       x="847.74976"
-       y="326.10507"
-       id="tspan206">pad 3 (source)</tspan>
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#0000ff"
-     x="195.50177"
-     y="83.305092"
-     id="text208">
-    <tspan
-       x="195.50177"
-       y="83.305092"
-       id="tspan210">sink</tspan>
-    <tspan
-       x="195.50177"
-       y="99.305092"
-       id="tspan212">crop</tspan>
-    <tspan
-       x="195.50177"
-       y="115.30509"
-       id="tspan214">selection</tspan>
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a020f0"
-     x="551.50177"
-     y="87.305092"
-     id="text216">
-    <tspan
-       x="551.50177"
-       y="87.305092"
-       id="tspan218">source</tspan>
-    <tspan
-       x="551.50177"
-       y="103.30509"
-       id="tspan220">crop</tspan>
-    <tspan
-       x="551.50177"
-       y="119.30509"
-       id="tspan222">selection</tspan>
-  </text>
-  <g
-     id="g224"
-     transform="translate(-1.4982376,-7.6949076)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
-       x1="211"
-       y1="132"
-       x2="166.21001"
-       y2="135.287"
-       id="line226" />
-    <polygon
-       style="fill:#0000ff"
-       points="169.069,140.091 158.73,135.836 168.337,130.118 166.21,135.287 "
-       id="polygon228" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
-       points="169.069,140.091 158.73,135.836 168.337,130.118 166.21,135.287 "
-       id="polygon230" />
-  </g>
-  <g
-     id="g232"
-     transform="translate(-1.4982376,-7.6949076)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
-       x1="209"
-       y1="131"
-       x2="115.581"
-       y2="306.20901"
-       id="line234" />
-    <polygon
-       style="fill:#0000ff"
-       points="121.169,306.355 112.052,312.827 112.345,301.65 115.581,306.209 "
-       id="polygon236" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
-       points="121.169,306.355 112.052,312.827 112.345,301.65 115.581,306.209 "
-       id="polygon238" />
-  </g>
-  <g
-     id="g240"
-     transform="translate(-1.4982376,-7.6949076)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       x1="550.492"
-       y1="133.214"
-       x2="514.91602"
-       y2="186.46899"
-       id="line242" />
-    <polygon
-       style="fill:#a020f0"
-       points="520.463,187.168 510.75,192.706 512.147,181.613 514.916,186.469 "
-       id="polygon244" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       points="520.463,187.168 510.75,192.706 512.147,181.613 514.916,186.469 "
-       id="polygon246" />
-  </g>
-  <g
-     id="g248"
-     transform="translate(-1.4982376,-7.6949076)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       x1="550.07202"
-       y1="133.787"
-       x2="510.61801"
-       y2="275.08899"
-       id="line250" />
-    <polygon
-       style="fill:#a020f0"
-       points="516.106,274.025 508.601,282.312 506.475,271.336 510.618,275.089 "
-       id="polygon252" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       points="516.106,274.025 508.601,282.312 506.475,271.336 510.618,275.089 "
-       id="polygon254" />
-  </g>
-</svg>
diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg b/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg
deleted file mode 100644
index 401d1456958c..000000000000
--- a/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg
+++ /dev/null
@@ -1,550 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="58.803326cm"
-   height="16.463955cm"
-   viewBox="-194 128 1175.0698 319.59442"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="subdev-image-processing-scaling-multi-source.svg">
-  <metadata
-     id="metadata186">
-    <rdf:RDF>
-      <cc:Work
-	 rdf:about="">
-	<dc:format>image/svg+xml</dc:format>
-	<dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-	<dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <defs
-     id="defs184" />
-  <sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview182"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:zoom="0.26595857"
-     inkscape:cx="1049.9581"
-     inkscape:cy="292.5708"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg2" />
-  <rect
-     style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-     x="-9.6002426"
-     y="124.14409"
-     width="806"
-     height="327"
-     id="rect4" />
-  <g
-     id="g6"
-     transform="translate(-1.6002426,-5.8559115)">
-    <rect
-       style="fill:#ffffff"
-       x="4.5"
-       y="189"
-       width="159"
-       height="104"
-       id="rect8" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#a52a2a;stroke-width:2"
-       x="4.5"
-       y="189"
-       width="159"
-       height="104"
-       id="rect10" />
-  </g>
-  <g
-     id="g12"
-     transform="translate(-1.6002426,-5.8559115)">
-    <rect
-       style="fill:#ffffff"
-       x="49.5"
-       y="204"
-       width="94"
-       height="77"
-       id="rect14" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
-       x="49.5"
-       y="204"
-       width="94"
-       height="77"
-       id="rect16" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#0000ff"
-     x="58.399757"
-     y="218.14409"
-     id="text18">
-    <tspan
-       x="58.399757"
-       y="218.14409"
-       id="tspan20">sink</tspan>
-    <tspan
-       x="58.399757"
-       y="234.14409"
-       id="tspan22">crop</tspan>
-    <tspan
-       x="58.399757"
-       y="250.14409"
-       id="tspan24">selection</tspan>
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="27.899757"
-     y="152.14409"
-     id="text26">
-    <tspan
-       x="27.899757"
-       y="152.14409"
-       id="tspan28" />
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a52a2a"
-     x="6.938117"
-     y="152.05809"
-     id="text30">
-    <tspan
-       x="6.938117"
-       y="152.05809"
-       id="tspan32">sink media</tspan>
-    <tspan
-       x="6.938117"
-       y="168.05809"
-       id="tspan34">bus format</tspan>
-  </text>
-  <g
-     id="g36"
-     transform="translate(-1.6002426,-5.8559115)">
-    <rect
-       style="fill:#ffffff"
-       x="333.64401"
-       y="185.64999"
-       width="165.2"
-       height="172.478"
-       id="rect38" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#00ff00;stroke-width:2"
-       x="333.64401"
-       y="185.64999"
-       width="165.2"
-       height="172.478"
-       id="rect40" />
-  </g>
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="332.04376"
-     y1="352.27206"
-     x2="47.899757"
-     y2="275.14407"
-     id="line42" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="332.04376"
-     y1="179.79408"
-     x2="47.899757"
-     y2="198.14409"
-     id="line44" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="497.24374"
-     y1="352.27206"
-     x2="141.89977"
-     y2="275.14407"
-     id="line46" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="497.24374"
-     y1="179.79408"
-     x2="141.89977"
-     y2="198.14409"
-     id="line48" />
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#00ff00"
-     x="333.10376"
-     y="143.58609"
-     id="text50">
-    <tspan
-       x="333.10376"
-       y="143.58609"
-       id="tspan52">sink compose</tspan>
-    <tspan
-       x="333.10376"
-       y="159.58609"
-       id="tspan54">selection (scaling)</tspan>
-  </text>
-  <g
-     id="g56"
-     transform="translate(-1.6002426,-5.8559115)">
-    <rect
-       style="fill:#ffffff"
-       x="382.32199"
-       y="199.565"
-       width="100.186"
-       height="71.452301"
-       id="rect58" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       x="382.32199"
-       y="199.565"
-       width="100.186"
-       height="71.452301"
-       id="rect60" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a020f0"
-     x="541.7218"
-     y="143.58609"
-     id="text62">
-    <tspan
-       x="541.7218"
-       y="143.58609"
-       id="tspan64">source</tspan>
-    <tspan
-       x="541.7218"
-       y="159.58609"
-       id="tspan66">crop</tspan>
-    <tspan
-       x="541.7218"
-       y="175.58609"
-       id="tspan68">selection</tspan>
-  </text>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#8b6914"
-     x="689.89978"
-     y="151.27209"
-     id="text70">
-    <tspan
-       x="689.89978"
-       y="151.27209"
-       id="tspan72">source media</tspan>
-    <tspan
-       x="689.89978"
-       y="167.27209"
-       id="tspan74">bus format</tspan>
-  </text>
-  <g
-     id="g76"
-     transform="translate(-1.6002426,-5.8559115)">
-    <rect
-       style="fill:#ffffff"
-       x="690.48798"
-       y="225.834"
-       width="100.186"
-       height="71.452301"
-       id="rect78" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
-       x="690.48798"
-       y="225.834"
-       width="100.186"
-       height="71.452301"
-       id="rect80" />
-  </g>
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="688.88776"
-     y1="291.43008"
-     x2="380.72174"
-     y2="265.16208"
-     id="line82" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="688.88776"
-     y1="219.97809"
-     x2="380.72174"
-     y2="193.70909"
-     id="line84" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="789.07379"
-     y1="291.43008"
-     x2="480.90775"
-     y2="265.16208"
-     id="line86" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="789.07379"
-     y1="219.97809"
-     x2="480.90775"
-     y2="193.70909"
-     id="line88" />
-  <g
-     id="g90"
-     transform="translate(-1.6002426,-5.8559115)">
-    <circle
-       style="fill:#ffffff"
-       cx="808.09998"
-       cy="249.98399"
-       id="ellipse92"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="808.09998"
-       cy="249.98399"
-       id="ellipse94"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="808.09998"
-       cy="249.98399"
-       id="ellipse96"
-       r="8.5" />
-  </g>
-  <g
-     id="g98"
-     transform="translate(-1.6002426,-5.8559115)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       x1="816.59998"
-       y1="249.98399"
-       x2="972.93402"
-       y2="250.01199"
-       id="line100" />
-    <polygon
-       style="fill:#000000"
-       points="970.435,245.012 980.434,250.014 970.433,255.012 972.934,250.012 "
-       id="polygon102" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       points="970.435,245.012 980.434,250.014 970.433,255.012 972.934,250.012 "
-       id="polygon104" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="840.3078"
-     y="233.94409"
-     id="text106">
-    <tspan
-       x="840.3078"
-       y="233.94409"
-       id="tspan108">pad 1 (source)</tspan>
-  </text>
-  <g
-     id="g110"
-     transform="translate(-1.6002426,-5.8559115)">
-    <circle
-       style="fill:#ffffff"
-       cx="-20.398199"
-       cy="241.51199"
-       id="ellipse112"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="-20.398199"
-       cy="241.51199"
-       id="ellipse114"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="-20.398199"
-       cy="241.51199"
-       id="ellipse116"
-       r="8.5" />
-  </g>
-  <g
-     id="g118"
-     transform="translate(-1.6002426,-5.8559115)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       x1="-192.39799"
-       y1="241.8"
-       x2="-38.6343"
-       y2="241.52901"
-       id="line120" />
-    <polygon
-       style="fill:#000000"
-       points="-41.1431,236.534 -31.1343,241.516 -41.1254,246.534 -38.6343,241.529 "
-       id="polygon122" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       points="-41.1431,236.534 -31.1343,241.516 -41.1254,246.534 -38.6343,241.529 "
-       id="polygon124" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="-149.45824"
-     y="223.94409"
-     id="text126">
-    <tspan
-       x="-149.45824"
-       y="223.94409"
-       id="tspan128">pad 0 (sink)</tspan>
-  </text>
-  <rect
-     style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-     x="388.22174"
-     y="270.81006"
-     width="100.186"
-     height="71.452301"
-     id="rect130" />
-  <g
-     id="g132"
-     transform="translate(-1.6002426,-5.8559115)">
-    <rect
-       style="fill:#ffffff"
-       x="689.98798"
-       y="345.93399"
-       width="100.186"
-       height="71.452301"
-       id="rect134" />
-    <rect
-       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
-       x="689.98798"
-       y="345.93399"
-       width="100.186"
-       height="71.452301"
-       id="rect136" />
-  </g>
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="688.38776"
-     y1="411.53006"
-     x2="388.22174"
-     y2="342.26208"
-     id="line138" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="688.38776"
-     y1="340.07806"
-     x2="388.22174"
-     y2="270.81006"
-     id="line140" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="788.57379"
-     y1="411.53006"
-     x2="488.40775"
-     y2="342.26208"
-     id="line142" />
-  <line
-     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
-     x1="788.57379"
-     y1="340.07806"
-     x2="488.40775"
-     y2="270.81006"
-     id="line144" />
-  <g
-     id="g146"
-     transform="translate(-1.6002426,-5.8559115)">
-    <circle
-       style="fill:#ffffff"
-       cx="805.59998"
-       cy="384.08401"
-       id="ellipse148"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="805.59998"
-       cy="384.08401"
-       id="ellipse150"
-       r="8.5" />
-    <circle
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       cx="805.59998"
-       cy="384.08401"
-       id="ellipse152"
-       r="8.5" />
-  </g>
-  <g
-     id="g154"
-     transform="translate(-1.6002426,-5.8559115)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       x1="814.09998"
-       y1="384.08401"
-       x2="970.43402"
-       y2="384.112"
-       id="line156" />
-    <polygon
-       style="fill:#000000"
-       points="967.935,379.112 977.934,384.114 967.933,389.112 970.434,384.112 "
-       id="polygon158" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
-       points="967.935,379.112 977.934,384.114 967.933,389.112 970.434,384.112 "
-       id="polygon160" />
-  </g>
-  <text
-     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
-     x="837.8078"
-     y="368.04407"
-     id="text162">
-    <tspan
-       x="837.8078"
-       y="368.04407"
-       id="tspan164">pad 2 (source)</tspan>
-  </text>
-  <g
-     id="g166"
-     transform="translate(-1.6002426,-5.8559115)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       x1="546"
-       y1="191"
-       x2="492.15701"
-       y2="198.263"
-       id="line168" />
-    <polygon
-       style="fill:#a020f0"
-       points="495.303,202.884 484.724,199.266 493.966,192.974 492.157,198.263 "
-       id="polygon170" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       points="495.303,202.884 484.724,199.266 493.966,192.974 492.157,198.263 "
-       id="polygon172" />
-  </g>
-  <g
-     id="g174"
-     transform="translate(-1.6002426,-5.8559115)">
-    <line
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       x1="546.90802"
-       y1="190.72501"
-       x2="495.383"
-       y2="268.548"
-       id="line176" />
-    <polygon
-       style="fill:#a020f0"
-       points="500.932,269.224 491.242,274.802 492.594,263.703 495.383,268.548 "
-       id="polygon178" />
-    <polygon
-       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
-       points="500.932,269.224 491.242,274.802 492.594,263.703 495.383,268.548 "
-       id="polygon180" />
-  </g>
-</svg>
diff --git a/Documentation/media/uapi/v4l/tch-formats.rst b/Documentation/media/uapi/v4l/tch-formats.rst
deleted file mode 100644
index 429c1010149d..000000000000
--- a/Documentation/media/uapi/v4l/tch-formats.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _tch-formats:
-
-*************
-Touch Formats
-*************
-
-These formats are used for :ref:`touch` interface only.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    pixfmt-tch-td16
-    pixfmt-tch-td08
-    pixfmt-tch-tu16
-    pixfmt-tch-tu08
diff --git a/Documentation/media/uapi/v4l/tuner.rst b/Documentation/media/uapi/v4l/tuner.rst
deleted file mode 100644
index 601dc535199c..000000000000
--- a/Documentation/media/uapi/v4l/tuner.rst
+++ /dev/null
@@ -1,92 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _tuner:
-
-*********************
-Tuners and Modulators
-*********************
-
-
-Tuners
-======
-
-Video input devices can have one or more tuners demodulating a RF
-signal. Each tuner is associated with one or more video inputs,
-depending on the number of RF connectors on the tuner. The ``type``
-field of the respective struct :c:type:`v4l2_input`
-returned by the :ref:`VIDIOC_ENUMINPUT` ioctl is
-set to ``V4L2_INPUT_TYPE_TUNER`` and its ``tuner`` field contains the
-index number of the tuner.
-
-Radio input devices have exactly one tuner with index zero, no video
-inputs.
-
-To query and change tuner properties applications use the
-:ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>` and
-:ref:`VIDIOC_S_TUNER <VIDIOC_G_TUNER>` ioctls, respectively. The
-struct :c:type:`v4l2_tuner` returned by :ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>`
-also contains signal status information applicable when the tuner of the
-current video or radio input is queried.
-
-.. note::
-
-   :ref:`VIDIOC_S_TUNER <VIDIOC_G_TUNER>` does not switch the
-   current tuner, when there is more than one. The tuner is solely
-   determined by the current video input. Drivers must support both ioctls
-   and set the ``V4L2_CAP_TUNER`` flag in the struct :c:type:`v4l2_capability`
-   returned by the :ref:`VIDIOC_QUERYCAP` ioctl when the
-   device has one or more tuners.
-
-
-Modulators
-==========
-
-Video output devices can have one or more modulators, that modulate a
-video signal for radiation or connection to the antenna input of a TV
-set or video recorder. Each modulator is associated with one or more
-video outputs, depending on the number of RF connectors on the
-modulator. The ``type`` field of the respective struct
-:c:type:`v4l2_output` returned by the
-:ref:`VIDIOC_ENUMOUTPUT` ioctl is set to
-``V4L2_OUTPUT_TYPE_MODULATOR`` and its ``modulator`` field contains the
-index number of the modulator.
-
-Radio output devices have exactly one modulator with index zero, no
-video outputs.
-
-A video or radio device cannot support both a tuner and a modulator. Two
-separate device nodes will have to be used for such hardware, one that
-supports the tuner functionality and one that supports the modulator
-functionality. The reason is a limitation with the
-:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl where you
-cannot specify whether the frequency is for a tuner or a modulator.
-
-To query and change modulator properties applications use the
-:ref:`VIDIOC_G_MODULATOR <VIDIOC_G_MODULATOR>` and
-:ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl. Note that
-:ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` does not switch the current modulator, when there
-is more than one at all. The modulator is solely determined by the
-current video output. Drivers must support both ioctls and set the
-``V4L2_CAP_MODULATOR`` flag in the struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl when the device has
-one or more modulators.
-
-
-Radio Frequency
-===============
-
-To get and set the tuner or modulator radio frequency applications use
-the :ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` and
-:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl which both take
-a pointer to a struct :c:type:`v4l2_frequency`. These
-ioctls are used for TV and radio devices alike. Drivers must support
-both ioctls when the tuner or modulator ioctls are supported, or when
-the device is a radio device.
diff --git a/Documentation/media/uapi/v4l/user-func.rst b/Documentation/media/uapi/v4l/user-func.rst
deleted file mode 100644
index ca0ef21d77fe..000000000000
--- a/Documentation/media/uapi/v4l/user-func.rst
+++ /dev/null
@@ -1,88 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _user-func:
-
-******************
-Function Reference
-******************
-
-
-.. toctree::
-    :maxdepth: 1
-
-    func-close
-    func-ioctl
-    vidioc-create-bufs
-    vidioc-cropcap
-    vidioc-dbg-g-chip-info
-    vidioc-dbg-g-register
-    vidioc-decoder-cmd
-    vidioc-dqevent
-    vidioc-dv-timings-cap
-    vidioc-encoder-cmd
-    vidioc-enumaudio
-    vidioc-enumaudioout
-    vidioc-enum-dv-timings
-    vidioc-enum-fmt
-    vidioc-enum-framesizes
-    vidioc-enum-frameintervals
-    vidioc-enum-freq-bands
-    vidioc-enuminput
-    vidioc-enumoutput
-    vidioc-enumstd
-    vidioc-expbuf
-    vidioc-g-audio
-    vidioc-g-audioout
-    vidioc-g-crop
-    vidioc-g-ctrl
-    vidioc-g-dv-timings
-    vidioc-g-edid
-    vidioc-g-enc-index
-    vidioc-g-ext-ctrls
-    vidioc-g-fbuf
-    vidioc-g-fmt
-    vidioc-g-frequency
-    vidioc-g-input
-    vidioc-g-jpegcomp
-    vidioc-g-modulator
-    vidioc-g-output
-    vidioc-g-parm
-    vidioc-g-priority
-    vidioc-g-selection
-    vidioc-g-sliced-vbi-cap
-    vidioc-g-std
-    vidioc-g-tuner
-    vidioc-log-status
-    vidioc-overlay
-    vidioc-prepare-buf
-    vidioc-qbuf
-    vidioc-querybuf
-    vidioc-querycap
-    vidioc-queryctrl
-    vidioc-query-dv-timings
-    vidioc-querystd
-    vidioc-reqbufs
-    vidioc-s-hw-freq-seek
-    vidioc-streamon
-    vidioc-subdev-enum-frame-interval
-    vidioc-subdev-enum-frame-size
-    vidioc-subdev-enum-mbus-code
-    vidioc-subdev-g-crop
-    vidioc-subdev-g-fmt
-    vidioc-subdev-g-frame-interval
-    vidioc-subdev-g-selection
-    vidioc-subscribe-event
-    func-mmap
-    func-munmap
-    func-open
-    func-poll
-    func-read
-    func-select
-    func-write
diff --git a/Documentation/media/uapi/v4l/userp.rst b/Documentation/media/uapi/v4l/userp.rst
deleted file mode 100644
index b19da8655452..000000000000
--- a/Documentation/media/uapi/v4l/userp.rst
+++ /dev/null
@@ -1,128 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _userp:
-
-*****************************
-Streaming I/O (User Pointers)
-*****************************
-
-Input and output devices support this I/O method when the
-``V4L2_CAP_STREAMING`` flag in the ``capabilities`` field of struct
-:c:type:`v4l2_capability` returned by the
-:ref:`VIDIOC_QUERYCAP` ioctl is set. If the
-particular user pointer method (not only memory mapping) is supported
-must be determined by calling the :ref:`VIDIOC_REQBUFS` ioctl
-with the memory type set to ``V4L2_MEMORY_USERPTR``.
-
-This I/O method combines advantages of the read/write and memory mapping
-methods. Buffers (planes) are allocated by the application itself, and
-can reside for example in virtual or shared memory. Only pointers to
-data are exchanged, these pointers and meta-information are passed in
-struct :c:type:`v4l2_buffer` (or in struct
-:c:type:`v4l2_plane` in the multi-planar API case). The
-driver must be switched into user pointer I/O mode by calling the
-:ref:`VIDIOC_REQBUFS` with the desired buffer type.
-No buffers (planes) are allocated beforehand, consequently they are not
-indexed and cannot be queried like mapped buffers with the
-:ref:`VIDIOC_QUERYBUF <VIDIOC_QUERYBUF>` ioctl.
-
-Example: Initiating streaming I/O with user pointers
-====================================================
-
-.. code-block:: c
-
-    struct v4l2_requestbuffers reqbuf;
-
-    memset (&reqbuf, 0, sizeof (reqbuf));
-    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-    reqbuf.memory = V4L2_MEMORY_USERPTR;
-
-    if (ioctl (fd, VIDIOC_REQBUFS, &reqbuf) == -1) {
-	if (errno == EINVAL)
-	    printf ("Video capturing or user pointer streaming is not supported\\n");
-	else
-	    perror ("VIDIOC_REQBUFS");
-
-	exit (EXIT_FAILURE);
-    }
-
-Buffer (plane) addresses and sizes are passed on the fly with the
-:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` ioctl. Although buffers are commonly
-cycled, applications can pass different addresses and sizes at each
-:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` call. If required by the hardware the
-driver swaps memory pages within physical memory to create a continuous
-area of memory. This happens transparently to the application in the
-virtual memory subsystem of the kernel. When buffer pages have been
-swapped out to disk they are brought back and finally locked in physical
-memory for DMA. [#f1]_
-
-Filled or displayed buffers are dequeued with the
-:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. The driver can unlock the
-memory pages at any time between the completion of the DMA and this
-ioctl. The memory is also unlocked when
-:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called,
-:ref:`VIDIOC_REQBUFS`, or when the device is closed.
-Applications must take care not to free buffers without dequeuing.
-Firstly, the buffers remain locked for longer, wasting physical memory.
-Secondly the driver will not be notified when the memory is returned to
-the application's free list and subsequently reused for other purposes,
-possibly completing the requested DMA and overwriting valuable data.
-
-For capturing applications it is customary to enqueue a number of empty
-buffers, to start capturing and enter the read loop. Here the
-application waits until a filled buffer can be dequeued, and re-enqueues
-the buffer when the data is no longer needed. Output applications fill
-and enqueue buffers, when enough buffers are stacked up output is
-started. In the write loop, when the application runs out of free
-buffers it must wait until an empty buffer can be dequeued and reused.
-Two methods exist to suspend execution of the application until one or
-more buffers can be dequeued. By default :ref:`VIDIOC_DQBUF
-<VIDIOC_QBUF>` blocks when no buffer is in the outgoing queue. When the
-``O_NONBLOCK`` flag was given to the :ref:`open() <func-open>` function,
-:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN``
-error code when no buffer is available. The :ref:`select()
-<func-select>` or :ref:`poll() <func-poll>` function are always
-available.
-
-To start and stop capturing or output applications call the
-:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and
-:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctl.
-
-.. note::
-
-   :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from
-   both queues and unlocks all buffers as a side effect. Since there is no
-   notion of doing anything "now" on a multitasking system, if an
-   application needs to synchronize with another event it should examine
-   the struct :c:type:`v4l2_buffer` ``timestamp`` of captured or
-   outputted buffers.
-
-Drivers implementing user pointer I/O must support the
-:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`,
-:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`
-and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls, the
-:ref:`select() <func-select>` and :ref:`poll() <func-poll>` function. [#f2]_
-
-.. [#f1]
-   We expect that frequently used buffers are typically not swapped out.
-   Anyway, the process of swapping, locking or generating scatter-gather
-   lists may be time consuming. The delay can be masked by the depth of
-   the incoming buffer queue, and perhaps by maintaining caches assuming
-   a buffer will be soon enqueued again. On the other hand, to optimize
-   memory usage drivers can limit the number of buffers locked in
-   advance and recycle the most recently used buffers first. Of course,
-   the pages of empty buffers in the incoming queue need not be saved to
-   disk. Output buffers must be saved on the incoming and outgoing queue
-   because an application may share them with other processes.
-
-.. [#f2]
-   At the driver level :ref:`select() <func-select>` and :ref:`poll() <func-poll>` are
-   the same, and :ref:`select() <func-select>` is too important to be optional.
-   The rest should be evident.
diff --git a/Documentation/media/uapi/v4l/v4l2-selection-flags.rst b/Documentation/media/uapi/v4l/v4l2-selection-flags.rst
deleted file mode 100644
index cc8f2a2b7cba..000000000000
--- a/Documentation/media/uapi/v4l/v4l2-selection-flags.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-selection-flags:
-
-***************
-Selection flags
-***************
-
-.. tabularcolumns:: |p{5.2cm}|p{2.0cm}|p{6.5cm}|p{1.2cm}|p{1.6cm}|
-
-.. _v4l2-selection-flags-table:
-
-.. flat-table:: Selection flag definitions
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Flag name
-      - id
-      - Definition
-      - Valid for V4L2
-      - Valid for V4L2 subdev
-    * - ``V4L2_SEL_FLAG_GE``
-      - (1 << 0)
-      - Suggest the driver it should choose greater or equal rectangle (in
-	size) than was requested. Albeit the driver may choose a lesser
-	size, it will only do so due to hardware limitations. Without this
-	flag (and ``V4L2_SEL_FLAG_LE``) the behaviour is to choose the
-	closest possible rectangle.
-      - Yes
-      - Yes
-    * - ``V4L2_SEL_FLAG_LE``
-      - (1 << 1)
-      - Suggest the driver it should choose lesser or equal rectangle (in
-	size) than was requested. Albeit the driver may choose a greater
-	size, it will only do so due to hardware limitations.
-      - Yes
-      - Yes
-    * - ``V4L2_SEL_FLAG_KEEP_CONFIG``
-      - (1 << 2)
-      - The configuration must not be propagated to any further processing
-	steps. If this flag is not given, the configuration is propagated
-	inside the subdevice to all further processing steps.
-      - No
-      - Yes
diff --git a/Documentation/media/uapi/v4l/v4l2-selection-targets.rst b/Documentation/media/uapi/v4l/v4l2-selection-targets.rst
deleted file mode 100644
index aae0c0013eb1..000000000000
--- a/Documentation/media/uapi/v4l/v4l2-selection-targets.rst
+++ /dev/null
@@ -1,78 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2-selection-targets:
-
-*****************
-Selection targets
-*****************
-
-The precise meaning of the selection targets may be dependent on which
-of the two interfaces they are used.
-
-
-.. _v4l2-selection-targets-table:
-
-.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{7.4cm}|p{1.2cm}|p{1.4cm}|
-
-.. flat-table:: Selection target definitions
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Target name
-      - id
-      - Definition
-      - Valid for V4L2
-      - Valid for V4L2 subdev
-    * - ``V4L2_SEL_TGT_CROP``
-      - 0x0000
-      - Crop rectangle. Defines the cropped area.
-      - Yes
-      - Yes
-    * - ``V4L2_SEL_TGT_CROP_DEFAULT``
-      - 0x0001
-      - Suggested cropping rectangle that covers the "whole picture".
-        This includes only active pixels and excludes other non-active
-        pixels such as black pixels.
-      - Yes
-      - Yes
-    * - ``V4L2_SEL_TGT_CROP_BOUNDS``
-      - 0x0002
-      - Bounds of the crop rectangle. All valid crop rectangles fit inside
-	the crop bounds rectangle.
-      - Yes
-      - Yes
-    * - ``V4L2_SEL_TGT_NATIVE_SIZE``
-      - 0x0003
-      - The native size of the device, e.g. a sensor's pixel array.
-	``left`` and ``top`` fields are zero for this target.
-      - Yes
-      - Yes
-    * - ``V4L2_SEL_TGT_COMPOSE``
-      - 0x0100
-      - Compose rectangle. Used to configure scaling and composition.
-      - Yes
-      - Yes
-    * - ``V4L2_SEL_TGT_COMPOSE_DEFAULT``
-      - 0x0101
-      - Suggested composition rectangle that covers the "whole picture".
-      - Yes
-      - No
-    * - ``V4L2_SEL_TGT_COMPOSE_BOUNDS``
-      - 0x0102
-      - Bounds of the compose rectangle. All valid compose rectangles fit
-	inside the compose bounds rectangle.
-      - Yes
-      - Yes
-    * - ``V4L2_SEL_TGT_COMPOSE_PADDED``
-      - 0x0103
-      - The active area and all padding pixels that are inserted or
-	modified by hardware.
-      - Yes
-      - No
diff --git a/Documentation/media/uapi/v4l/v4l2.rst b/Documentation/media/uapi/v4l/v4l2.rst
deleted file mode 100644
index 97015b9b40b8..000000000000
--- a/Documentation/media/uapi/v4l/v4l2.rst
+++ /dev/null
@@ -1,423 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. include:: <isonum.txt>
-.. _v4l2spec:
-
-############################
-Part I - Video for Linux API
-############################
-
-This part describes the Video for Linux API version 2 (V4L2 API) specification.
-
-**Revision 4.5**
-
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-    :numbered:
-    :maxdepth: 5
-
-    common
-    pixfmt
-    io
-    devices
-    libv4l
-    compat
-    user-func
-    common-defs
-    videodev
-    capture-example
-    v4l2grab-example
-    biblio
-
-
-**********************
-Revision and Copyright
-**********************
-
-Authors, in alphabetical order:
-
-- Ailus, Sakari <sakari.ailus@iki.fi>
-
-  - Subdev selections API.
-
-- Carvalho Chehab, Mauro <mchehab+samsung@kernel.org>
-
-  - Documented libv4l, designed and added v4l2grab example, Remote Controller chapter.
-
-- Dirks, Bill
-
-  - Original author of the V4L2 API and documentation.
-
-- Figa, Tomasz <tfiga@chromium.org>
-
-  - Documented the memory-to-memory decoder interface.
-
-- H Schimek, Michael <mschimek@gmx.at>
-
-  - Original author of the V4L2 API and documentation.
-
-- Karicheri, Muralidharan <m-karicheri2@ti.com>
-
-  - Documented the Digital Video timings API.
-
-- Osciak, Pawel <posciak@chromium.org>
-
-  - Documented the memory-to-memory decoder interface.
-
-- Osciak, Pawel <pawel@osciak.com>
-
-  - Designed and documented the multi-planar API.
-
-- Palosaari, Antti <crope@iki.fi>
-
-  - SDR API.
-
-- Ribalda, Ricardo
-
-  - Introduce HSV formats and other minor changes.
-
-- Rubli, Martin
-
-  - Designed and documented the VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctls.
-
-- Walls, Andy <awalls@md.metrocast.net>
-
-  - Documented the fielded V4L2_MPEG_STREAM_VBI_FMT_IVTV MPEG stream embedded, sliced VBI data format in this specification.
-
-- Verkuil, Hans <hverkuil@xs4all.nl>
-
-  - Designed and documented the VIDIOC_LOG_STATUS ioctl, the extended control ioctls, major parts of the sliced VBI API, the MPEG encoder and decoder APIs and the DV Timings API.
-
-**Copyright** |copy| 1999-2018: Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab, Pawel Osciak, Sakari Ailus & Antti Palosaari, Tomasz Figa
-
-Except when explicitly stated as GPL, programming examples within this
-part can be used and distributed without restrictions.
-
-****************
-Revision History
-****************
-
-:revision: 4.10 / 2016-07-15 (*rr*)
-
-Introduce HSV formats.
-
-
-:revision: 4.5 / 2015-10-29 (*rr*)
-
-Extend VIDIOC_G_EXT_CTRLS;. Replace ctrl_class with a new union with
-ctrl_class and which. Which is used to select the current value of the
-control or the default value.
-
-
-:revision: 4.4 / 2015-05-26 (*ap*)
-
-Renamed V4L2_TUNER_ADC to V4L2_TUNER_SDR. Added
-V4L2_CID_RF_TUNER_RF_GAIN control. Added transmitter support for
-Software Defined Radio (SDR) Interface.
-
-
-:revision: 4.1 / 2015-02-13 (*mcc*)
-
-Fix documentation for media controller device nodes and add support for
-DVB device nodes. Add support for Tuner sub-device.
-
-
-:revision: 3.19 / 2014-12-05 (*hv*)
-
-Rewrote Colorspace chapter, added new enum
-:c:type:`v4l2_ycbcr_encoding` and enum
-:c:type:`v4l2_quantization` fields to struct
-:c:type:`v4l2_pix_format`, struct
-:c:type:`v4l2_pix_format_mplane` and struct
-:c:type:`v4l2_mbus_framefmt`.
-
-
-:revision: 3.17 / 2014-08-04 (*lp, hv*)
-
-Extended struct :c:type:`v4l2_pix_format`. Added
-format flags. Added compound control types and VIDIOC_QUERY_EXT_CTRL.
-
-
-:revision: 3.15 / 2014-02-03 (*hv, ap*)
-
-Update several sections of "Common API Elements": "Opening and Closing
-Devices" "Querying Capabilities", "Application Priority", "Video Inputs
-and Outputs", "Audio Inputs and Outputs" "Tuners and Modulators", "Video
-Standards" and "Digital Video (DV) Timings". Added SDR API.
-
-
-:revision: 3.14 / 2013-11-25 (*rr*)
-
-Set width and height as unsigned on v4l2_rect.
-
-
-:revision: 3.11 / 2013-05-26 (*hv*)
-
-Remove obsolete VIDIOC_DBG_G_CHIP_IDENT ioctl.
-
-
-:revision: 3.10 / 2013-03-25 (*hv*)
-
-Remove obsolete and unused DV_PRESET ioctls: VIDIOC_G_DV_PRESET,
-VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and
-VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output
-capability flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS.
-Added VIDIOC_DBG_G_CHIP_INFO.
-
-
-:revision: 3.9 / 2012-12-03 (*sa, sn*)
-
-Added timestamp types to v4l2_buffer. Added
-V4L2_EVENT_CTRL_CH_RANGE control event changes flag.
-
-
-:revision: 3.6 / 2012-07-02 (*hv*)
-
-Added VIDIOC_ENUM_FREQ_BANDS.
-
-
-:revision: 3.5 / 2012-05-07 (*sa, sn, hv*)
-
-Added V4L2_CTRL_TYPE_INTEGER_MENU and V4L2 subdev selections API.
-Improved the description of V4L2_CID_COLORFX control, added
-V4L2_CID_COLORFX_CBCR control. Added camera controls
-V4L2_CID_AUTO_EXPOSURE_BIAS,
-V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE,
-V4L2_CID_IMAGE_STABILIZATION, V4L2_CID_ISO_SENSITIVITY,
-V4L2_CID_ISO_SENSITIVITY_AUTO, V4L2_CID_EXPOSURE_METERING,
-V4L2_CID_SCENE_MODE, V4L2_CID_3A_LOCK,
-V4L2_CID_AUTO_FOCUS_START, V4L2_CID_AUTO_FOCUS_STOP,
-V4L2_CID_AUTO_FOCUS_STATUS and V4L2_CID_AUTO_FOCUS_RANGE. Added
-VIDIOC_ENUM_DV_TIMINGS, VIDIOC_QUERY_DV_TIMINGS and
-VIDIOC_DV_TIMINGS_CAP.
-
-
-:revision: 3.4 / 2012-01-25 (*sn*)
-
-Added :ref:`JPEG compression control class. <jpeg-controls>`
-
-
-:revision: 3.3 / 2012-01-11 (*hv*)
-
-Added device_caps field to struct v4l2_capabilities.
-
-
-:revision: 3.2 / 2011-08-26 (*hv*)
-
-Added V4L2_CTRL_FLAG_VOLATILE.
-
-
-:revision: 3.1 / 2011-06-27 (*mcc, po, hv*)
-
-Documented that VIDIOC_QUERYCAP now returns a per-subsystem version
-instead of a per-driver one. Standardize an error code for invalid
-ioctl. Added V4L2_CTRL_TYPE_BITMASK.
-
-
-:revision: 2.6.39 / 2011-03-01 (*mcc, po*)
-
-Removed VIDIOC_*_OLD from videodev2.h header and update it to reflect
-latest changes. Added the :ref:`multi-planar API <planar-apis>`.
-
-
-:revision: 2.6.37 / 2010-08-06 (*hv*)
-
-Removed obsolete vtx (videotext) API.
-
-
-:revision: 2.6.33 / 2009-12-03 (*mk*)
-
-Added documentation for the Digital Video timings API.
-
-
-:revision: 2.6.32 / 2009-08-31 (*mcc*)
-
-Now, revisions will match the kernel version where the V4L2 API changes
-will be used by the Linux Kernel. Also added Remote Controller chapter.
-
-
-:revision: 0.29 / 2009-08-26 (*ev*)
-
-Added documentation for string controls and for FM Transmitter controls.
-
-
-:revision: 0.28 / 2009-08-26 (*gl*)
-
-Added V4L2_CID_BAND_STOP_FILTER documentation.
-
-
-:revision: 0.27 / 2009-08-15 (*mcc*)
-
-Added libv4l and Remote Controller documentation; added v4l2grab and
-keytable application examples.
-
-
-:revision: 0.26 / 2009-07-23 (*hv*)
-
-Finalized the RDS capture API. Added modulator and RDS encoder
-capabilities. Added support for string controls.
-
-
-:revision: 0.25 / 2009-01-18 (*hv*)
-
-Added pixel formats VYUY, NV16 and NV61, and changed the debug ioctls
-VIDIOC_DBG_G/S_REGISTER and VIDIOC_DBG_G_CHIP_IDENT. Added camera
-controls V4L2_CID_ZOOM_ABSOLUTE, V4L2_CID_ZOOM_RELATIVE,
-V4L2_CID_ZOOM_CONTINUOUS and V4L2_CID_PRIVACY.
-
-
-:revision: 0.24 / 2008-03-04 (*mhs*)
-
-Added pixel formats Y16 and SBGGR16, new controls and a camera controls
-class. Removed VIDIOC_G/S_MPEGCOMP.
-
-
-:revision: 0.23 / 2007-08-30 (*mhs*)
-
-Fixed a typo in VIDIOC_DBG_G/S_REGISTER. Clarified the byte order of
-packed pixel formats.
-
-
-:revision: 0.22 / 2007-08-29 (*mhs*)
-
-Added the Video Output Overlay interface, new MPEG controls,
-V4L2_FIELD_INTERLACED_TB and V4L2_FIELD_INTERLACED_BT,
-VIDIOC_DBG_G/S_REGISTER, VIDIOC\_(TRY\_)ENCODER_CMD,
-VIDIOC_G_CHIP_IDENT, VIDIOC_G_ENC_INDEX, new pixel formats.
-Clarifications in the cropping chapter, about RGB pixel formats, the
-mmap(), poll(), select(), read() and write() functions. Typographical
-fixes.
-
-
-:revision: 0.21 / 2006-12-19 (*mhs*)
-
-Fixed a link in the VIDIOC_G_EXT_CTRLS section.
-
-
-:revision: 0.20 / 2006-11-24 (*mhs*)
-
-Clarified the purpose of the audioset field in struct v4l2_input and
-v4l2_output.
-
-
-:revision: 0.19 / 2006-10-19 (*mhs*)
-
-Documented V4L2_PIX_FMT_RGB444.
-
-
-:revision: 0.18 / 2006-10-18 (*mhs*)
-
-Added the description of extended controls by Hans Verkuil. Linked
-V4L2_PIX_FMT_MPEG to V4L2_CID_MPEG_STREAM_TYPE.
-
-
-:revision: 0.17 / 2006-10-12 (*mhs*)
-
-Corrected V4L2_PIX_FMT_HM12 description.
-
-
-:revision: 0.16 / 2006-10-08 (*mhs*)
-
-VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS are now part
-of the API.
-
-
-:revision: 0.15 / 2006-09-23 (*mhs*)
-
-Cleaned up the bibliography, added BT.653 and BT.1119.
-capture.c/start_capturing() for user pointer I/O did not initialize the
-buffer index. Documented the V4L MPEG and MJPEG VID_TYPEs and
-V4L2_PIX_FMT_SBGGR8. Updated the list of reserved pixel formats. See
-the history chapter for API changes.
-
-
-:revision: 0.14 / 2006-09-14 (*mr*)
-
-Added VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS proposal
-for frame format enumeration of digital devices.
-
-
-:revision: 0.13 / 2006-04-07 (*mhs*)
-
-Corrected the description of struct v4l2_window clips. New V4L2_STD\_
-and V4L2_TUNER_MODE_LANG1_LANG2 defines.
-
-
-:revision: 0.12 / 2006-02-03 (*mhs*)
-
-Corrected the description of struct v4l2_captureparm and
-v4l2_outputparm.
-
-
-:revision: 0.11 / 2006-01-27 (*mhs*)
-
-Improved the description of struct v4l2_tuner.
-
-
-:revision: 0.10 / 2006-01-10 (*mhs*)
-
-VIDIOC_G_INPUT and VIDIOC_S_PARM clarifications.
-
-
-:revision: 0.9 / 2005-11-27 (*mhs*)
-
-Improved the 525 line numbering diagram. Hans Verkuil and I rewrote the
-sliced VBI section. He also contributed a VIDIOC_LOG_STATUS page.
-Fixed VIDIOC_S_STD call in the video standard selection example.
-Various updates.
-
-
-:revision: 0.8 / 2004-10-04 (*mhs*)
-
-Somehow a piece of junk slipped into the capture example, removed.
-
-
-:revision: 0.7 / 2004-09-19 (*mhs*)
-
-Fixed video standard selection, control enumeration, downscaling and
-aspect example. Added read and user pointer i/o to video capture
-example.
-
-
-:revision: 0.6 / 2004-08-01 (*mhs*)
-
-v4l2_buffer changes, added video capture example, various corrections.
-
-
-:revision: 0.5 / 2003-11-05 (*mhs*)
-
-Pixel format erratum.
-
-
-:revision: 0.4 / 2003-09-17 (*mhs*)
-
-Corrected source and Makefile to generate a PDF. SGML fixes. Added
-latest API changes. Closed gaps in the history chapter.
-
-
-:revision: 0.3 / 2003-02-05 (*mhs*)
-
-Another draft, more corrections.
-
-
-:revision: 0.2 / 2003-01-15 (*mhs*)
-
-Second draft, with corrections pointed out by Gerd Knorr.
-
-
-:revision: 0.1 / 2002-12-01 (*mhs*)
-
-First draft, based on documentation by Bill Dirks and discussions on the
-V4L mailing list.
diff --git a/Documentation/media/uapi/v4l/v4l2grab-example.rst b/Documentation/media/uapi/v4l/v4l2grab-example.rst
deleted file mode 100644
index 2a0cfd4429c1..000000000000
--- a/Documentation/media/uapi/v4l/v4l2grab-example.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _v4l2grab-example:
-
-**********************************
-Video Grabber example using libv4l
-**********************************
-
-This program demonstrates how to grab V4L2 images in ppm format by using
-libv4l handlers. The advantage is that this grabber can potentially work
-with any V4L2 driver.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    v4l2grab.c
diff --git a/Documentation/media/uapi/v4l/v4l2grab.c.rst b/Documentation/media/uapi/v4l/v4l2grab.c.rst
deleted file mode 100644
index e76c5fb7bd19..000000000000
--- a/Documentation/media/uapi/v4l/v4l2grab.c.rst
+++ /dev/null
@@ -1,176 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-file: media/v4l/v4l2grab.c
-==========================
-
-.. code-block:: c
-
-    /* V4L2 video picture grabber
-       Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@kernel.org>
-
-       This program is free software; you can redistribute it and/or modify
-       it under the terms of the GNU General Public License as published by
-       the Free Software Foundation version 2 of the License.
-
-       This program is distributed in the hope that it will be useful,
-       but WITHOUT ANY WARRANTY; without even the implied warranty of
-       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-       GNU General Public License for more details.
-     */
-
-    #include <stdio.h>
-    #include <stdlib.h>
-    #include <string.h>
-    #include <fcntl.h>
-    #include <errno.h>
-    #include <sys/ioctl.h>
-    #include <sys/types.h>
-    #include <sys/time.h>
-    #include <sys/mman.h>
-    #include <linux/videodev2.h>
-    #include "../libv4l/include/libv4l2.h"
-
-    #define CLEAR(x) memset(&(x), 0, sizeof(x))
-
-    struct buffer {
-	    void   *start;
-	    size_t length;
-    };
-
-    static void xioctl(int fh, int request, void *arg)
-    {
-	    int r;
-
-	    do {
-		    r = v4l2_ioctl(fh, request, arg);
-	    } while (r == -1 && ((errno == EINTR) || (errno == EAGAIN)));
-
-	    if (r == -1) {
-		    fprintf(stderr, "error %d, %s\\n", errno, strerror(errno));
-		    exit(EXIT_FAILURE);
-	    }
-    }
-
-    int main(int argc, char **argv)
-    {
-	    struct v4l2_format              fmt;
-	    struct v4l2_buffer              buf;
-	    struct v4l2_requestbuffers      req;
-	    enum v4l2_buf_type              type;
-	    fd_set                          fds;
-	    struct timeval                  tv;
-	    int                             r, fd = -1;
-	    unsigned int                    i, n_buffers;
-	    char                            *dev_name = "/dev/video0";
-	    char                            out_name[256];
-	    FILE                            *fout;
-	    struct buffer                   *buffers;
-
-	    fd = v4l2_open(dev_name, O_RDWR | O_NONBLOCK, 0);
-	    if (fd < 0) {
-		    perror("Cannot open device");
-		    exit(EXIT_FAILURE);
-	    }
-
-	    CLEAR(fmt);
-	    fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	    fmt.fmt.pix.width       = 640;
-	    fmt.fmt.pix.height      = 480;
-	    fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_RGB24;
-	    fmt.fmt.pix.field       = V4L2_FIELD_INTERLACED;
-	    xioctl(fd, VIDIOC_S_FMT, &fmt);
-	    if (fmt.fmt.pix.pixelformat != V4L2_PIX_FMT_RGB24) {
-		    printf("Libv4l didn't accept RGB24 format. Can't proceed.\\n");
-		    exit(EXIT_FAILURE);
-	    }
-	    if ((fmt.fmt.pix.width != 640) || (fmt.fmt.pix.height != 480))
-		    printf("Warning: driver is sending image at %dx%d\\n",
-			    fmt.fmt.pix.width, fmt.fmt.pix.height);
-
-	    CLEAR(req);
-	    req.count = 2;
-	    req.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	    req.memory = V4L2_MEMORY_MMAP;
-	    xioctl(fd, VIDIOC_REQBUFS, &req);
-
-	    buffers = calloc(req.count, sizeof(*buffers));
-	    for (n_buffers = 0; n_buffers < req.count; ++n_buffers) {
-		    CLEAR(buf);
-
-		    buf.type        = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    buf.memory      = V4L2_MEMORY_MMAP;
-		    buf.index       = n_buffers;
-
-		    xioctl(fd, VIDIOC_QUERYBUF, &buf);
-
-		    buffers[n_buffers].length = buf.length;
-		    buffers[n_buffers].start = v4l2_mmap(NULL, buf.length,
-				  PROT_READ | PROT_WRITE, MAP_SHARED,
-				  fd, buf.m.offset);
-
-		    if (MAP_FAILED == buffers[n_buffers].start) {
-			    perror("mmap");
-			    exit(EXIT_FAILURE);
-		    }
-	    }
-
-	    for (i = 0; i < n_buffers; ++i) {
-		    CLEAR(buf);
-		    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    buf.memory = V4L2_MEMORY_MMAP;
-		    buf.index = i;
-		    xioctl(fd, VIDIOC_QBUF, &buf);
-	    }
-	    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-	    xioctl(fd, VIDIOC_STREAMON, &type);
-	    for (i = 0; i < 20; i++) {
-		    do {
-			    FD_ZERO(&fds);
-			    FD_SET(fd, &fds);
-
-			    /* Timeout. */
-			    tv.tv_sec = 2;
-			    tv.tv_usec = 0;
-
-			    r = select(fd + 1, &fds, NULL, NULL, &tv);
-		    } while ((r == -1 && (errno = EINTR)));
-		    if (r == -1) {
-			    perror("select");
-			    return errno;
-		    }
-
-		    CLEAR(buf);
-		    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		    buf.memory = V4L2_MEMORY_MMAP;
-		    xioctl(fd, VIDIOC_DQBUF, &buf);
-
-		    sprintf(out_name, "out%03d.ppm", i);
-		    fout = fopen(out_name, "w");
-		    if (!fout) {
-			    perror("Cannot open image");
-			    exit(EXIT_FAILURE);
-		    }
-		    fprintf(fout, "P6\\n%d %d 255\\n",
-			    fmt.fmt.pix.width, fmt.fmt.pix.height);
-		    fwrite(buffers[buf.index].start, buf.bytesused, 1, fout);
-		    fclose(fout);
-
-		    xioctl(fd, VIDIOC_QBUF, &buf);
-	    }
-
-	    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	    xioctl(fd, VIDIOC_STREAMOFF, &type);
-	    for (i = 0; i < n_buffers; ++i)
-		    v4l2_munmap(buffers[i].start, buffers[i].length);
-	    v4l2_close(fd);
-
-	    return 0;
-    }
diff --git a/Documentation/media/uapi/v4l/vbi_525.svg b/Documentation/media/uapi/v4l/vbi_525.svg
deleted file mode 100644
index 6cd5def22b1f..000000000000
--- a/Documentation/media/uapi/v4l/vbi_525.svg
+++ /dev/null
@@ -1,821 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   xml:space="preserve"
-   width="208.73068mm"
-   height="51.395489mm"
-   viewBox="0 0 739.59691 182.11"
-   sodipodi:docname="vbi_525.svg"><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview4"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:zoom="1.5350601"
-     inkscape:cx="264.23387"
-     inkscape:cy="44.916942"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="g10"
-     units="mm" /><metadata
-     id="metadata8"><rdf:RDF><cc:Work
-	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
-     id="defs6"><clipPath
-       id="clipPath20"
-       clipPathUnits="userSpaceOnUse"><path
-	 inkscape:connector-curvature="0"
-	 id="path22"
-	 d="m 0,0 5950,0 0,3922 L 0,3922 0,0 Z m 0,3922 5950,0 0,1 -5950,0 0,-1 z m 0,1 1359,0 0,1 -1359,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1363,0 0,1 -1363,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1367,0 0,1 -1367,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1371,0 0,1 -1371,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1375,0 0,1 -1375,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1379,0 0,1 -1379,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1383,0 0,1 -1383,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1387,0 0,1 -1387,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1391,0 0,1 -1391,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1390,0 0,1 -1390,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1386,0 0,1 -1386,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1382,0 0,1 -1382,0 0,-1 z m
-1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1378,0 0,1 -1378,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1374,0 0,1 -1374,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1370,0 0,1 -1370,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1366,0 0,1 -1366,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1362,0 0,1 -1362,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1358,0 0,1 -1358,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,4478 -5950,0 0,-4478 z" /></clipPath><clipPath
-       id="clipPath98"
-       clipPathUnits="userSpaceOnUse"><path
-	 inkscape:connector-curvature="0"
-	 id="path100"
-	 d="m 0,0 5950,0 0,4546 L 0,4546 0,0 Z m 0,4546 5950,0 0,1 -5950,0 0,-1 z m 0,1 1360,0 0,1 -1360,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1364,0 0,1 -1364,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1368,0 0,1 -1368,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1372,0 0,1 -1372,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1376,0 0,1 -1376,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1380,0 0,1 -1380,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1384,0 0,1 -1384,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1388,0 0,1 -1388,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1391,0 0,1 -1391,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1389,0 0,1 -1389,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1385,0 0,1 -1385,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1381,0 0,1 -1381,0 0,-1 z m
-1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1377,0 0,1 -1377,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1373,0 0,1 -1373,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1369,0 0,1 -1369,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1365,0 0,1 -1365,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1361,0 0,1 -1361,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1357,0 0,1 -1357,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,3854 -5950,0 0,-3854 z" /></clipPath></defs><g
-     transform="matrix(0.125,0,0,-0.125,-87.571875,638.05691)"
-     inkscape:label="vbi_525"
-     inkscape:groupmode="layer"
-     id="g10"><g
-       transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
-       id="g12"
-       style=""><path
-	 inkscape:connector-curvature="0"
-	 id="path14"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1281.75,3974.45 0,-85.05" /></g><g
-       transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
-       id="g16"
-       style=""><g
-	 clip-path="url(#clipPath20)"
-	 id="g18"
-	 style=""><path
-	   inkscape:connector-curvature="0"
-	   id="path24"
-	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   d="m 1281.75,3931.93 113.4,0" /></g></g><g
-       transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
-       id="g26"
-       style=""><path
-	 inkscape:connector-curvature="0"
-	 id="path28"
-	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-	 d="m 1352.31,3922.48 37.8,9.45 -37.8,9.45 0,-18.9" /><path
-	 inkscape:connector-curvature="0"
-	 id="path30"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1352.31,3922.48 37.8,9.45 -37.8,9.45 0,-18.9 z" /><path
-	 inkscape:connector-curvature="0"
-	 id="path32"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 4683.75,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path34"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 4400.25,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path36"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 4116.75,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path38"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 3833.25,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path40"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 3549.75,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path42"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 3266.25,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path44"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2982.75,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path46"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2699.25,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path48"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2415.75,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path50"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2132.25,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path52"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1848.75,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path54"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1565.25,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path56"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1281.75,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path58"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 998.25,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path60"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 714.75,4059.5 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path62"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 4683.75,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path64"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 4400.25,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path66"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 4116.75,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path68"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 3833.25,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path70"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 3549.75,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path72"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 3266.25,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path74"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2982.75,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path76"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2699.25,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path78"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2415.75,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path80"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 2132.25,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path82"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1848.75,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path84"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1565.25,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path86"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1281.75,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path88"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 998.25,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path90"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 714.75,4144.55 0,-56.7" /><path
-	 inkscape:connector-curvature="0"
-	 id="path92"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1281.75,4598.15 0,-85.05" /></g><g
-       transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
-       id="g94"
-       style=""><g
-	 clip-path="url(#clipPath98)"
-	 id="g96"
-	 style=""><path
-	   inkscape:connector-curvature="0"
-	   id="path102"
-	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   d="m 1281.75,4555.63 113.4,0" /></g></g><path
-       d="m 1547.8322,4815.7637 49.1401,12.2851 -49.1401,12.285 0,-24.5701"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path106"
-       inkscape:connector-curvature="0" /><path
-       d="m 1547.8322,4815.7637 49.1401,12.2851 -49.1401,12.285 0,-24.5701 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path108"
-       inkscape:connector-curvature="0" /><path
-       d="m 1456.104,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path110"
-       inkscape:connector-curvature="0" /><path
-       d="m 1824.6548,5030.7452 0,73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path112"
-       inkscape:connector-curvature="0" /><path
-       d="m 2193.2055,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path114"
-       inkscape:connector-curvature="0" /><path
-       d="m 2561.7563,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path116"
-       inkscape:connector-curvature="0" /><path
-       d="m 2930.307,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path118"
-       inkscape:connector-curvature="0" /><path
-       d="m 3298.8578,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path120"
-       inkscape:connector-curvature="0" /><path
-       d="m 3667.4085,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path122"
-       inkscape:connector-curvature="0" /><path
-       d="m 4035.9593,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path124"
-       inkscape:connector-curvature="0" /><path
-       d="m 4404.51,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path126"
-       inkscape:connector-curvature="0" /><path
-       d="m 4773.0608,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path128"
-       inkscape:connector-curvature="0" /><path
-       d="m 5141.6115,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path130"
-       inkscape:connector-curvature="0" /><path
-       d="m 5510.1623,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path132"
-       inkscape:connector-curvature="0" /><path
-       d="m 5878.713,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path134"
-       inkscape:connector-curvature="0" /><path
-       d="m 1456.104,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path136"
-       inkscape:connector-curvature="0" /><path
-       d="m 1824.6548,4920.1799 0,73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path138"
-       inkscape:connector-curvature="0" /><path
-       d="m 2193.2055,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path140"
-       inkscape:connector-curvature="0" /><path
-       d="m 2561.7563,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path142"
-       inkscape:connector-curvature="0" /><path
-       d="m 2930.307,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path144"
-       inkscape:connector-curvature="0" /><path
-       d="m 3298.8578,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path146"
-       inkscape:connector-curvature="0" /><path
-       d="m 3667.4085,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path148"
-       inkscape:connector-curvature="0" /><path
-       d="m 4035.9593,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path150"
-       inkscape:connector-curvature="0" /><path
-       d="m 4404.51,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path152"
-       inkscape:connector-curvature="0" /><path
-       d="m 4773.0608,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path154"
-       inkscape:connector-curvature="0" /><path
-       d="m 5141.6115,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path156"
-       inkscape:connector-curvature="0" /><path
-       d="m 5510.1623,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path158"
-       inkscape:connector-curvature="0" /><path
-       d="m 5878.713,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path160"
-       inkscape:connector-curvature="0" /><path
-       d="m 719.00254,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path162"
-       inkscape:connector-curvature="0" /><path
-       d="m 719.00254,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path164"
-       inkscape:connector-curvature="0" /><path
-       d="m 1087.5533,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path166"
-       inkscape:connector-curvature="0" /><path
-       d="m 1087.5533,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path168"
-       inkscape:connector-curvature="0" /><path
-       d="m 700.575,4735.9046 18.42754,0 0,-110.5653 36.85507,0 0,110.5653 18.42754,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path170"
-       inkscape:connector-curvature="0" /><path
-       d="m 774.28515,4680.6285 18.42754,0 0,110.5652 -18.42754,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path172"
-       inkscape:connector-curvature="0" /><path
-       d="m 792.71269,4735.9046 18.42753,0 0,92.1442 18.42754,-18.4341 18.42754,36.8551 18.42754,-36.8551 18.42753,36.8551 18.42754,-55.2761 18.42754,55.2761 18.42754,-18.421 18.42753,55.2761 18.42754,-55.2761 18.42754,18.421 18.4275,36.8551 18.4276,-92.1312 18.4275,55.2761 18.4275,-55.2761 0,-55.2891"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path174"
-       inkscape:connector-curvature="0" /><path
-       d="m 1069.1257,4735.9046 18.4276,0 0,-110.5653 36.8551,0 0,110.5653 18.421,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path176"
-       inkscape:connector-curvature="0" /><path
-       d="m 1142.8294,4680.6285 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path178"
-       inkscape:connector-curvature="0" /><path
-       d="m 1456.104,4735.9046 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 18.421,0 0,110.5653 165.8543,0 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 147.4203,0 0,110.5653 36.8551,0 0,-110.5653 147.4203,0 0,110.5653 36.855,0 0,-110.5653 147.4203,0 0,110.5653 36.8551,0 0,-110.5653 147.4203,0 0,110.5653 36.8551,0 0,-110.5653 147.4203,0 0,110.5653 36.855,0 0,-110.5653 147.4203,0 0,110.5653 36.8551,0 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 18.421,0 0,110.5653 165.8543,0 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 36.855,0 0,110.5653 18.4211,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path180"
-       inkscape:connector-curvature="0" /><path
-       d="m 1161.2634,4735.9046 294.8406,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path182"
-       inkscape:connector-curvature="0" /><path
-       d="m 6320.9739,4735.9046 18.421,0 0,92.1442 18.4341,-18.4341 18.421,73.7102 18.4341,-55.2761 18.421,36.855 18.434,-18.434 18.4211,36.8551 18.434,-36.8551 18.421,36.8551 18.4341,-36.8551 18.421,18.434 18.4341,-36.855 18.421,36.855 18.434,-36.855 18.4211,-18.4341 0,-73.7101 18.434,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path184"
-       inkscape:connector-curvature="0" /><path
-       d="m 4828.3369,4680.6285 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path186"
-       inkscape:connector-curvature="0" /><path
-       d="m 4846.7709,4735.9046 294.8406,0 0,-110.5653 36.8551,0 0,110.5653 18.421,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path188"
-       inkscape:connector-curvature="0" /><path
-       d="m 5196.8876,4680.6285 18.4276,0 0,110.5652 -18.4276,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path190"
-       inkscape:connector-curvature="0" /><path
-       d="m 5565.4384,4680.6285 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path192"
-       inkscape:connector-curvature="0" /><path
-       d="m 5933.9891,4680.6285 18.4276,0 0,110.5652 -18.4276,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path194"
-       inkscape:connector-curvature="0" /><path
-       d="m 5952.4232,4735.9046 294.8406,0 0,-110.5653 36.855,0 0,110.5653 18.4211,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path196"
-       inkscape:connector-curvature="0" /><path
-       d="m 6302.5399,4680.6285 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path198"
-       inkscape:connector-curvature="0" /><path
-       d="m 5786.5688,4735.9046 92.1442,0 0,-110.5653 36.8551,0 0,110.5653 18.421,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path200"
-       inkscape:connector-curvature="0" /><path
-       d="m 5805.0029,4791.1937 -36.8551,-110.5652"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path202"
-       inkscape:connector-curvature="0" /><path
-       d="m 5583.8724,4735.9046 165.8414,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path204"
-       inkscape:connector-curvature="0" /><path
-       d="m 5768.1478,4791.1937 -36.8551,-110.5652"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path206"
-       inkscape:connector-curvature="0" /><path
-       d="m 5215.3217,4735.9046 294.8406,0 0,-110.5653 36.855,0 0,110.5653 18.4211,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path208"
-       inkscape:connector-curvature="0" /><path
-       d="m 6247.2638,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path210"
-       inkscape:connector-curvature="0" /><path
-       d="m 6247.2638,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path212"
-       inkscape:connector-curvature="0" /><path
-       d="m 6615.8145,5104.4553 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path214"
-       inkscape:connector-curvature="0" /><path
-       d="m 6615.8145,4993.8901 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path216"
-       inkscape:connector-curvature="0" /><path
-       d="m 700.575,3925.0929 18.42754,0 0,-110.5652 36.85507,0 0,110.5652 18.42754,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path218"
-       inkscape:connector-curvature="0" /><path
-       d="m 774.28515,3869.8168 18.42754,0 0,110.5652 -18.42754,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path220"
-       inkscape:connector-curvature="0" /><path
-       d="m 1142.8294,3869.8168 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path222"
-       inkscape:connector-curvature="0" /><path
-       d="m 792.71269,3925.0929 18.42753,0 0,110.5652 18.42754,-36.855 18.42754,18.434 18.42754,-36.8551 18.42753,36.8551 0,-92.1442 202.70293,0 0,-110.5652 36.8551,0 0,110.5652 18.421,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path224"
-       inkscape:connector-curvature="0" /><path
-       d="m 1161.2634,3925.0929 110.5653,0 0,-110.5652 18.421,0 0,110.5652 165.8543,0 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 18.421,0 0,110.5652 165.8544,0 0,-110.5652 18.421,0 0,110.5652 165.8544,0 0,-110.5652 18.421,0 0,110.5652 165.8543,0 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 147.4203,0 0,110.5652 36.8551,0 0,-110.5652 147.4203,0 0,110.5652 36.8551,0 0,-110.5652 147.4203,0 0,110.5652 36.855,0 0,-110.5652 147.4203,0 0,110.5652 36.8551,0 0,-110.5652 147.4203,0 0,110.5652 36.8551,0 0,-110.5652 147.4203,0 0,110.5652 36.855,0 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 18.421,0 0,110.5652 165.8544,0 0,-110.5652 18.421,0 0,110.5652 165.8543,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path226"
-       inkscape:connector-curvature="0" /><path
-       d="m 4220.2346,3925.0929 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 18.4211,0 0,110.5652 55.2891,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path228"
-       inkscape:connector-curvature="0" /><path
-       d="m 4478.2202,3925.0929 294.8406,0 0,-110.5652 36.855,0 0,110.5652 18.4211,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path230"
-       inkscape:connector-curvature="0" /><path
-       d="m 5952.4232,3925.0929 128.9862,0 0,73.7102 18.4341,36.855 18.421,-18.421 18.434,36.8551 18.4211,-36.8551 18.434,18.421 18.421,-36.855 18.4341,18.434 18.421,-36.8551 0,-55.2891 18.4341,0 0,-110.5652 36.855,0 0,110.5652 18.4211,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path232"
-       inkscape:connector-curvature="0" /><path
-       d="m 6302.5399,3869.8168 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path234"
-       inkscape:connector-curvature="0" /><path
-       d="m 6320.9739,3925.0929 18.421,0 0,73.7102 18.4341,36.855 18.421,-36.855 18.4341,36.855 18.421,-18.421 18.434,0 18.4211,-36.8551 18.434,55.2761 18.421,-18.421 0,36.8551 18.4341,-18.4341 18.421,18.4341 18.4341,-36.8551 18.421,18.421 18.434,-55.2761 18.4211,18.4211 0,-73.7102 18.434,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path236"
-       inkscape:connector-curvature="0" /><path
-       d="m 5933.9891,3869.8168 18.4276,0 0,110.5652 -18.4276,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path238"
-       inkscape:connector-curvature="0" /><path
-       d="m 5786.5688,3925.0929 92.1442,0 0,-110.5652 36.8551,0 0,110.5652 18.421,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path240"
-       inkscape:connector-curvature="0" /><path
-       d="m 5805.0029,3980.382 -36.8551,-110.5652"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path242"
-       inkscape:connector-curvature="0" /><path
-       d="m 5768.1478,3980.382 -36.8551,-110.5652"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path244"
-       inkscape:connector-curvature="0" /><path
-       d="m 4828.3369,3869.8168 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path246"
-       inkscape:connector-curvature="0" /><path
-       d="m 5583.8724,3925.0929 165.8414,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path248"
-       inkscape:connector-curvature="0" /><path
-       d="m 4846.7709,3925.0929 294.8406,0 0,-110.5652 36.8551,0 0,110.5652 18.421,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path250"
-       inkscape:connector-curvature="0" /><path
-       d="m 5196.8876,3869.8168 18.4276,0 0,110.5652 -18.4276,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path252"
-       inkscape:connector-curvature="0" /><path
-       d="m 5215.3217,3925.0929 294.8406,0 0,-110.5652 36.855,0 0,110.5652 18.4211,0"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path254"
-       inkscape:connector-curvature="0" /><path
-       d="m 5565.4384,3869.8168 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path256"
-       inkscape:connector-curvature="0" /><path
-       d="m 6247.2638,4293.6437 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path258"
-       inkscape:connector-curvature="0" /><path
-       d="m 6247.2638,4183.0784 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path260"
-       inkscape:connector-curvature="0" /><path
-       d="m 6615.8145,4293.6437 0,-73.7102"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path262"
-       inkscape:connector-curvature="0" /><path
-       d="m 6615.8145,4183.0784 0,-73.7101"
-       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path264"
-       inkscape:connector-curvature="0" /><text
-       y="-4035.6582"
-       x="1621.9453"
-       id="text268"
-       style="font-variant:normal;font-weight:normal;font-size:61.42512512px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan270"
-	 sodipodi:role="line"
-	 y="-4035.6582"
-	 x="1621.9453 1642.3999 1676.5522">(1)</tspan></text>
-<text
-       y="-4127.7959"
-       x="4199.7334"
-       id="text272"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan274"
-	 sodipodi:role="line"
-	 y="-4127.7959"
-	 x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732">874569101211322631262</tspan><tspan
-	 id="tspan276"
-	 sodipodi:role="line"
-	 y="-4238.3613"
-	 x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732">271270267268269272273275274266265263264262</tspan><tspan
-	 id="tspan278"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164">492315610111278</tspan><tspan
-	 id="tspan280"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296">492315610111278</tspan><tspan
-	 id="tspan282"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="841.81781 882.8006 923.78326">524</tspan><tspan
-	 id="tspan284"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="841.81781 882.8006 923.78326">261</tspan><tspan
-	 id="tspan286"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="1210.3684 1251.3512 1292.3342">525</tspan><tspan
-	 id="tspan288"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="1210.3684 1251.3512 1292.3342">262</tspan><tspan
-	 id="tspan290"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="6022.0161 6062.999">22</tspan><tspan
-	 id="tspan292"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="6022.0161 6062.999">22</tspan><tspan
-	 id="tspan294"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="6390.5669 6431.5498">23</tspan><tspan
-	 id="tspan296"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="6390.5669 6431.5498">23</tspan><tspan
-	 id="tspan298"
-	 sodipodi:role="line"
-	 y="-4238.3623"
-	 x="6001.5244 6042.5068 6083.4902">285</tspan><tspan
-	 id="tspan300"
-	 sodipodi:role="line"
-	 y="-4127.7964"
-	 x="6022.0156 6062.9985">22</tspan><tspan
-	 id="tspan302"
-	 sodipodi:role="line"
-	 y="-4238.3623"
-	 x="6370.0747 6411.0571 6452.04">286</tspan><tspan
-	 id="tspan304"
-	 sodipodi:role="line"
-	 y="-4127.7964"
-	 x="6390.5664 6431.5493">23</tspan><tspan
-	 id="tspan306"
-	 sodipodi:role="line"
-	 y="-4459.4922"
-	 x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365">1st field</tspan><tspan
-	 id="tspan308"
-	 sodipodi:role="line"
-	 y="-3648.6809"
-	 x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text>
-<text
-       y="-4127.7959"
-       x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732"
-       id="text3632"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3634"
-	 sodipodi:role="line"
-	 y="-4127.7959"
-	 x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732">874569101211322631262</tspan></text>
-<text
-       y="-4238.3613"
-       x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732"
-       id="text3636"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3638"
-	 sodipodi:role="line"
-	 y="-4238.3613"
-	 x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732">271270267268269272273275274266265263264262</tspan></text>
-<text
-       y="-5049.1729"
-       x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164"
-       id="text3640"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3642"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164">492315610111278</tspan></text>
-<text
-       y="-4938.6074"
-       x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296"
-       id="text3644"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3646"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296">492315610111278</tspan></text>
-<text
-       y="-5049.1729"
-       x="841.81781 882.8006 923.78326"
-       id="text3648"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3650"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="841.81781 882.8006 923.78326">524</tspan></text>
-<text
-       y="-4938.6074"
-       x="841.81781 882.8006 923.78326"
-       id="text3652"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3654"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="841.81781 882.8006 923.78326">261</tspan></text>
-<text
-       y="-5049.1729"
-       x="1210.3684 1251.3512 1292.3342"
-       id="text3656"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3658"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="1210.3684 1251.3512 1292.3342">525</tspan></text>
-<text
-       y="-4938.6074"
-       x="1210.3684 1251.3512 1292.3342"
-       id="text3660"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3662"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="1210.3684 1251.3512 1292.3342">262</tspan></text>
-<text
-       y="-5049.1729"
-       x="6022.0161 6062.999"
-       id="text3664"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3666"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="6022.0161 6062.999">22</tspan></text>
-<text
-       y="-4938.6074"
-       x="6022.0161 6062.999"
-       id="text3668"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3670"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="6022.0161 6062.999">22</tspan></text>
-<text
-       y="-5049.1729"
-       x="6390.5669 6431.5498"
-       id="text3672"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3674"
-	 sodipodi:role="line"
-	 y="-5049.1729"
-	 x="6390.5669 6431.5498">23</tspan></text>
-<text
-       y="-4938.6074"
-       x="6390.5669 6431.5498"
-       id="text3676"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3678"
-	 sodipodi:role="line"
-	 y="-4938.6074"
-	 x="6390.5669 6431.5498">23</tspan></text>
-<text
-       y="-4238.3623"
-       x="6001.5244 6042.5068 6083.4902"
-       id="text3680"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3682"
-	 sodipodi:role="line"
-	 y="-4238.3623"
-	 x="6001.5244 6042.5068 6083.4902">285</tspan></text>
-<text
-       y="-4127.7964"
-       x="6022.0156 6062.9985"
-       id="text3684"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3686"
-	 sodipodi:role="line"
-	 y="-4127.7964"
-	 x="6022.0156 6062.9985">22</tspan></text>
-<text
-       y="-4238.3623"
-       x="6370.0747 6411.0571 6452.04"
-       id="text3688"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3690"
-	 sodipodi:role="line"
-	 y="-4238.3623"
-	 x="6370.0747 6411.0571 6452.04">286</tspan></text>
-<text
-       y="-4127.7964"
-       x="6390.5664 6431.5493"
-       id="text3692"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3694"
-	 sodipodi:role="line"
-	 y="-4127.7964"
-	 x="6390.5664 6431.5493">23</tspan></text>
-<text
-       y="-4459.4922"
-       x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365"
-       id="text3696"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3698"
-	 sodipodi:role="line"
-	 y="-4459.4922"
-	 x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365">1st field</tspan></text>
-<text
-       y="-3648.6809"
-       x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463"
-       id="text3700"
-       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"><tspan
-	 id="tspan3702"
-	 sodipodi:role="line"
-	 y="-3648.6809"
-	 x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text>
-</g></svg>
diff --git a/Documentation/media/uapi/v4l/vbi_625.svg b/Documentation/media/uapi/v4l/vbi_625.svg
deleted file mode 100644
index 7aaae5ec4878..000000000000
--- a/Documentation/media/uapi/v4l/vbi_625.svg
+++ /dev/null
@@ -1,870 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   xml:space="preserve"
-   width="209.46608mm"
-   height="51.576824mm"
-   viewBox="0 0 742.20265 182.75252"
-   sodipodi:docname="vbi_625.svg"><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview4"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:zoom="1.5350601"
-     inkscape:cx="288.91482"
-     inkscape:cy="170.67667"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="g10"
-     units="mm" /><metadata
-     id="metadata8"><rdf:RDF><cc:Work
-	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
-     id="defs6"><clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath20"><path
-	 d="m 0,0 5950,0 0,4546 L 0,4546 0,0 Z m 0,4546 5950,0 0,1 -5950,0 0,-1 z m 0,1 2211,0 0,1 -2211,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2215,0 0,1 -2215,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2219,0 0,1 -2219,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2223,0 0,1 -2223,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2227,0 0,1 -2227,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2231,0 0,1 -2231,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2235,0 0,1 -2235,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2239,0 0,1 -2239,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2240,0 0,1 -2240,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2236,0 0,1 -2236,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2232,0 0,1 -2232,0 0,-1 z m
-2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2228,0 0,1 -2228,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2224,0 0,1 -2224,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2220,0 0,1 -2220,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2216,0 0,1 -2216,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2212,0 0,1 -2212,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2208,0 0,1 -2208,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,3854 -5950,0 0,-3854 z"
-	 id="path22"
-	 inkscape:connector-curvature="0" /></clipPath><clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath98"><path
-	 d="m 0,0 5950,0 0,3922 L 0,3922 0,0 Z m 0,3922 5950,0 0,1 -5950,0 0,-1 z m 0,1 2209,0 0,1 -2209,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2213,0 0,1 -2213,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2217,0 0,1 -2217,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2221,0 0,1 -2221,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2225,0 0,1 -2225,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2229,0 0,1 -2229,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2233,0 0,1 -2233,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2237,0 0,1 -2237,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2237,0 0,1 -2237,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2233,0 0,1 -2233,0 0,-1 z m
-2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2229,0 0,1 -2229,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2225,0 0,1 -2225,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2221,0 0,1 -2221,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2217,0 0,1 -2217,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2213,0 0,1 -2213,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2209,0 0,1 -2209,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,4478 -5950,0 0,-4478 z"
-	 id="path100"
-	 inkscape:connector-curvature="0" /></clipPath></defs><g
-     id="g10"
-     inkscape:groupmode="layer"
-     inkscape:label="vbi_625"
-     transform="matrix(0.125,0,0,-0.125,-87.571875,638.69874)"><g
-       id="g12"
-       transform="matrix(1.3045828,0,0,1.3045828,-213.38312,-1110.9872)"
-       style=""><path
-	 d="m 2132.25,4598.15 0,-85.05"
-	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 id="path14"
-	 inkscape:connector-curvature="0" /></g><g
-       id="g16"
-       transform="matrix(1.3045828,0,0,1.3045828,-213.38312,-1110.9872)"
-       style=""><g
-	 id="g18"
-	 clip-path="url(#clipPath20)"
-	 style=""><path
-	   d="m 2132.25,4555.63 113.4,0"
-	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   id="path24"
-	   inkscape:connector-curvature="0" /></g></g><path
-       inkscape:connector-curvature="0"
-       id="path28"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       d="m 2660.3649,4819.881 49.3132,12.3283 -49.3132,12.3283 0,-24.6566" /><path
-       inkscape:connector-curvature="0"
-       id="path30"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2660.3649,4819.881 49.3132,12.3283 -49.3132,12.3283 0,-24.6566 z" /><path
-       inkscape:connector-curvature="0"
-       id="path32"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1828.6151,4924.6651 0,73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path34"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2198.4643,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path36"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2568.3136,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path38"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2938.1628,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path40"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 3308.012,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path42"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 3677.8612,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path44"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4047.7105,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path46"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4417.5597,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path48"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4787.4089,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path50"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5157.2581,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path52"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5527.1073,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path54"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5896.9566,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path56"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1458.7659,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path58"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1828.6151,5035.6199 0,73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path60"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2198.4643,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path62"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2568.3136,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path64"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2938.1628,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path66"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 3308.012,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path68"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 3677.8612,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path70"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4047.7105,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path72"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4417.5597,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path74"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4787.4089,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path76"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5157.2581,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path78"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5527.1073,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path80"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5896.9566,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path82"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1458.7659,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path84"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 719.06744,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path86"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 719.06744,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path88"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1088.9167,4998.635 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path90"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1088.9167,5109.5897 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path92"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2568.3136,4074.0119 0,-110.9548" /><g
-       id="g94"
-       transform="matrix(1.3045828,0,0,1.3045828,-213.38312,-1110.9872)"
-       style=""><g
-	 id="g96"
-	 clip-path="url(#clipPath98)"
-	 style=""><path
-	   d="m 2132.25,3931.93 113.4,0"
-	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   id="path102"
-	   inkscape:connector-curvature="0" /></g></g><path
-       inkscape:connector-curvature="0"
-       id="path106"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       d="m 2660.365,4006.2129 49.3132,12.3283 -49.3132,12.3283 0,-24.6566" /><path
-       inkscape:connector-curvature="0"
-       id="path108"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2660.365,4006.2129 49.3132,12.3283 -49.3132,12.3283 0,-24.6566 z" /><path
-       inkscape:connector-curvature="0"
-       id="path110"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6266.806,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path112"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5896.9567,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path114"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5527.1075,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path116"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5157.2583,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path118"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4787.409,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path120"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4417.5598,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path122"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4047.7106,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path124"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 3677.8613,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path126"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 3308.0121,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path128"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2938.1629,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path130"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2568.3136,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path132"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2198.4644,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path134"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1828.6152,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path136"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1458.7659,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path138"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6266.806,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path140"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5896.9567,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path142"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5527.1075,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path144"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5157.2583,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path146"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4787.409,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path148"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4417.5598,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path150"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4047.7106,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path152"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 3677.8613,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path154"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 3308.0121,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path156"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2938.1629,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path158"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2568.3136,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path160"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 2198.4644,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path162"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1828.6152,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path164"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1458.7659,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path166"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 719.06746,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path168"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 719.06746,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path170"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1088.9167,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path172"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1088.9167,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path174"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1144.3876,4684.2698 18.4924,0 0,110.9548 -18.4924,0 0,-110.9548 z" /><path
-       inkscape:connector-curvature="0"
-       id="path176"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1070.4242,4739.7407 18.4925,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
-       inkscape:connector-curvature="0"
-       id="path178"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 700.575,4739.7407 18.49246,0 0,-110.9548 36.98492,0 0,110.9548 18.49247,0" /><path
-       inkscape:connector-curvature="0"
-       id="path180"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 809.886,4739.7407 3.28754,0" /><path
-       inkscape:connector-curvature="0"
-       id="path182"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 809.886,4739.7407 3.28754,0" /><path
-       inkscape:connector-curvature="0"
-       id="path184"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 774.54485,4684.2698 18.49246,0 0,110.9548 -18.49246,0 0,-110.9548 z" /><path
-       inkscape:connector-curvature="0"
-       id="path186"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 793.03731,4739.7407 18.49246,0 18.49246,73.9698 18.49246,-36.9849 18.49246,92.4688 18.49247,-55.4839 18.49246,18.499 18.49246,-36.9849 18.49246,55.4708 18.49246,-73.9698 18.49246,55.4839 18.49247,-73.9699 18.49241,110.9548 18.4925,-92.4688 18.4925,55.4839 18.4924,-55.4839 0,-36.9849" /><path
-       inkscape:connector-curvature="0"
-       id="path188"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1162.8865,4739.7407 18.486,0 0,92.4688 18.499,-18.499 18.4859,36.9849 18.499,-36.9849 18.4859,36.9849 18.499,-55.4708 18.4859,55.4708 18.499,-18.4859 18.486,55.4708 18.499,-55.4708 18.4859,18.4859 18.499,36.9849 18.4859,-73.9698 18.499,36.9849 18.4859,-55.4708 0,-55.4839 18.499,0 0,-110.9548 36.985,0 0,110.9548 18.4859,0 0,55.4839 18.499,36.9849 18.4859,-36.9849 18.499,55.4708 18.4859,-18.4859 18.499,55.4708 18.486,-18.4859 0,-129.4537 18.4989,0 0,-110.9548 18.486,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.985,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0
-0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.486,0 0,110.9548 166.4386,0 0,-110.9548 18.486,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 36.9849,0 0,110.9548 332.8643,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
-       inkscape:connector-curvature="0"
-       id="path190"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 700.575,3926.0723 18.49246,0 0,-110.9547 36.98492,0 0,110.9547 18.49247,0" /><path
-       inkscape:connector-curvature="0"
-       id="path192"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 774.54485,3870.6015 18.49246,0 0,110.9547 -18.49246,0 0,-110.9547 z" /><path
-       inkscape:connector-curvature="0"
-       id="path194"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 793.03731,3926.0723 18.49246,0 0,92.4689 18.49246,-36.985 18.49246,73.9699 18.49246,-73.9699 18.49247,73.9699 18.49246,-36.9849 18.49246,18.4859 18.49246,-73.9698 18.49246,55.4839 18.49246,-18.499 18.49247,36.9849 18.49241,-73.9698 18.4925,92.4688 18.4925,-92.4688 18.4924,55.4839 0,-92.4689" /><path
-       inkscape:connector-curvature="0"
-       id="path196"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1070.4242,3926.0723 18.4925,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
-       inkscape:connector-curvature="0"
-       id="path198"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1144.3876,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
-       inkscape:connector-curvature="0"
-       id="path200"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 1162.8865,3926.0723 18.486,0 0,55.4839 18.499,92.4558 18.4859,-55.4708 36.9849,36.9849 18.499,-55.4839 18.4859,18.499 18.499,-36.985 18.486,55.4709 18.499,-18.4859 18.4859,-36.985 18.499,18.486 18.4859,36.9849 18.499,-36.9849 18.4859,36.9849 0,-110.9548 18.499,0 0,-110.9547 18.486,0 0,110.9547 166.4386,0 0,-110.9547 18.486,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.985,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.486,0 0,110.9547 166.4386,0 0,-110.9547 18.486,0 0,110.9547 166.4387,0 0,-110.9547
-18.4859,0 0,110.9547 351.3633,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
-       inkscape:connector-curvature="0"
-       id="path202"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5453.1376,4795.2246 -36.9849,-110.9548" /><path
-       inkscape:connector-curvature="0"
-       id="path204"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5434.6387,4739.7407 92.4688,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
-       inkscape:connector-curvature="0"
-       id="path206"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5582.5784,4684.2698 18.4924,0 0,110.9548 -18.4924,0 0,-110.9548 z" /><path
-       inkscape:connector-curvature="0"
-       id="path208"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5601.0773,4739.7407 295.8794,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
-       inkscape:connector-curvature="0"
-       id="path210"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5952.4276,4684.2698 18.4924,0 0,110.9548 -18.4924,0 0,-110.9548 z" /><path
-       inkscape:connector-curvature="0"
-       id="path212"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5970.9266,4739.7407 129.4407,0 0,147.9396 18.499,-36.9849 18.4859,36.9849 18.499,-36.9849 18.4859,18.499 18.499,-36.9849 18.4859,36.9849 18.499,-36.9849 18.486,-18.499 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path214"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4842.8799,4684.2698 18.4924,0 0,110.9548 -18.4924,0 0,-110.9548 z" /><path
-       inkscape:connector-curvature="0"
-       id="path216"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4861.3789,4739.7407 295.8794,0 0,-110.9548 36.9849,0 0,110.9548 18.4859,0" /><path
-       inkscape:connector-curvature="0"
-       id="path218"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5212.7291,4684.2698 18.4925,0 0,110.9548 -18.4925,0 0,-110.9548 z" /><path
-       inkscape:connector-curvature="0"
-       id="path220"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5231.2281,4739.7407 166.4256,0" /><path
-       inkscape:connector-curvature="0"
-       id="path222"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5416.1527,4795.2246 -36.9849,-110.9548" /><path
-       inkscape:connector-curvature="0"
-       id="path224"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4473.0307,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
-       inkscape:connector-curvature="0"
-       id="path226"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4491.5296,3926.0723 295.8794,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
-       inkscape:connector-curvature="0"
-       id="path228"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4842.8799,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
-       inkscape:connector-curvature="0"
-       id="path230"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 4861.3789,3926.0723 295.8794,0 0,-110.9547 36.9849,0 0,110.9547 18.4859,0" /><path
-       inkscape:connector-curvature="0"
-       id="path232"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5212.7291,3870.6015 18.4925,0 0,110.9547 -18.4925,0 0,-110.9547 z" /><path
-       inkscape:connector-curvature="0"
-       id="path234"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5416.1527,3981.5562 -36.9849,-110.9547" /><path
-       inkscape:connector-curvature="0"
-       id="path236"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5231.2281,3926.0723 166.4256,0" /><path
-       inkscape:connector-curvature="0"
-       id="path238"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5453.1376,3981.5562 -36.9849,-110.9547" /><path
-       inkscape:connector-curvature="0"
-       id="path240"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5434.6387,3926.0723 92.4688,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
-       inkscape:connector-curvature="0"
-       id="path242"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5582.5784,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
-       inkscape:connector-curvature="0"
-       id="path244"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5601.0773,3926.0723 295.8794,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
-       inkscape:connector-curvature="0"
-       id="path246"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5952.4276,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
-       inkscape:connector-curvature="0"
-       id="path248"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 5970.9266,3926.0723 18.4859,0 0,73.9699 18.499,36.9849 18.4859,-36.9849 18.499,36.9849 18.486,-18.4859 18.4989,0 18.486,-36.985 18.499,55.4709 18.4859,-18.4859 0,36.9849 18.499,-18.499 18.4859,18.499 18.499,-36.9849 18.4859,18.4859 18.499,-55.4709 18.486,18.486 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path250"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6248.307,4739.7407 18.499,0 0,-110.9548 36.9849,0 0,110.9548 18.4859,0" /><path
-       inkscape:connector-curvature="0"
-       id="path252"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6248.307,3926.0723 18.499,0 0,-110.9547 36.9849,0 0,110.9547 18.4859,0" /><path
-       inkscape:connector-curvature="0"
-       id="path254"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6322.2768,3870.6015 18.4925,0 0,110.9547 -18.4925,0 0,-110.9547 z" /><path
-       inkscape:connector-curvature="0"
-       id="path256"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6322.2768,4684.2698 18.4925,0 0,110.9548 -18.4925,0 0,-110.9548 z" /><path
-       inkscape:connector-curvature="0"
-       id="path258"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6340.7758,4739.7407 18.4859,0 0,55.4839 18.499,55.4708 18.486,-92.4558 18.4989,55.4709 18.486,0 18.499,55.4839 18.4859,-73.9698 18.499,36.9849 18.4859,-36.9849 36.985,73.9698 18.4989,-36.9849 18.486,36.9849 18.499,-55.4839 18.4859,36.9849 0,-110.9547 18.499,0" /><path
-       inkscape:connector-curvature="0"
-       id="path260"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6340.7758,3926.0723 18.4859,0 0,129.4538 18.499,-18.499 18.486,18.499 18.4989,-36.9849 18.486,18.4859 18.499,-36.9849 18.4859,18.499 18.499,-18.499 18.4859,55.4839 18.499,-18.499 18.486,36.9849 18.4989,-73.9698 18.486,55.4839 18.499,-55.4839 18.4859,36.9849 0,-110.9548 18.499,0" /><path
-       inkscape:connector-curvature="0"
-       id="path262"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6636.6552,4184.9668 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path264"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6636.6552,4295.9216 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path266"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6266.806,4998.6351 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path268"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6266.806,5109.5899 0,-73.9699" /><path
-       inkscape:connector-curvature="0"
-       id="path270"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6636.6552,4998.6351 0,-73.9698" /><path
-       inkscape:connector-curvature="0"
-       id="path272"
-       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       d="m 6636.6552,5109.5899 0,-73.9699" /><text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text276"
-       x="3550.4165"
-       y="-4462.3472"><tspan
-	 x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
-	 y="-4462.3472"
-	 sodipodi:role="line"
-	 id="tspan278">1st field</tspan><tspan
-	 x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
-	 y="-4943.1509"
-	 sodipodi:role="line"
-	 id="tspan280">1456783231231131022</tspan><tspan
-	 x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
-	 y="-5054.1064"
-	 sodipodi:role="line"
-	 id="tspan282">1456783262562462322</tspan><tspan
-	 x="842.29962 883.42694 924.55408"
-	 y="-4943.1509"
-	 sodipodi:role="line"
-	 id="tspan284">308</tspan><tspan
-	 x="842.29962 883.42694 924.55408"
-	 y="-5054.1064"
-	 sodipodi:role="line"
-	 id="tspan286">621</tspan><tspan
-	 x="1212.1489 1253.276 1294.4033"
-	 y="-4943.1509"
-	 sodipodi:role="line"
-	 id="tspan288">309</tspan><tspan
-	 x="1212.1489 1253.276 1294.4033"
-	 y="-5054.1064"
-	 sodipodi:role="line"
-	 id="tspan290">622</tspan><tspan
-	 x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
-	 y="-3648.6792"
-	 sodipodi:role="line"
-	 id="tspan292">2nd field</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:61.64153671px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text294"
-       x="2734.751"
-       y="-4037.021"><tspan
-	 x="2734.751 2755.2776 2789.5503"
-	 y="-4037.021"
-	 sodipodi:role="line"
-	 id="tspan296">(1)</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text298"
-       x="4951.772"
-       y="-4129.4834"><tspan
-	 x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
-	 y="-4129.4834"
-	 sodipodi:role="line"
-	 id="tspan300">765432313312311</tspan><tspan
-	 x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
-	 y="-4240.4385"
-	 sodipodi:role="line"
-	 id="tspan302">336335321320319318317316315314313312311</tspan><tspan
-	 x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
-	 y="-4129.4834"
-	 sodipodi:role="line"
-	 id="tspan304">182223309</tspan><tspan
-	 x="842.30634 883.43323 924.56055"
-	 y="-4240.4385"
-	 sodipodi:role="line"
-	 id="tspan306">309</tspan><tspan
-	 x="1212.1553 1253.2826 1294.4099"
-	 y="-4129.4834"
-	 sodipodi:role="line"
-	 id="tspan308">310</tspan><tspan
-	 x="1212.1553 1253.2826 1294.4099"
-	 y="-4240.4385"
-	 sodipodi:role="line"
-	 id="tspan310">310</tspan><tspan
-	 x="6410.605 6451.7319"
-	 y="-4129.4834"
-	 sodipodi:role="line"
-	 id="tspan312">24</tspan><tspan
-	 x="6390.041 6431.1685 6472.2954"
-	 y="-4240.4385"
-	 sodipodi:role="line"
-	 id="tspan314">337</tspan><tspan
-	 x="6040.7559 6081.8833"
-	 y="-4943.1504"
-	 sodipodi:role="line"
-	 id="tspan316">23</tspan><tspan
-	 x="6040.7559 6081.8833"
-	 y="-5054.106"
-	 sodipodi:role="line"
-	 id="tspan318">23</tspan><tspan
-	 x="6410.605 6451.7324"
-	 y="-4943.1504"
-	 sodipodi:role="line"
-	 id="tspan320">24</tspan><tspan
-	 x="6410.605 6451.7324"
-	 y="-5054.106"
-	 sodipodi:role="line"
-	 id="tspan322">24</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text3671"
-       x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
-       y="-4462.3472"><tspan
-	 x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
-	 y="-4462.3472"
-	 sodipodi:role="line"
-	 id="tspan3673">1st field</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text3675"
-       x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
-       y="-4943.1509"><tspan
-	 x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
-	 y="-4943.1509"
-	 sodipodi:role="line"
-	 id="tspan3677">1456783231231131022</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text3679"
-       x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
-       y="-5054.1064"><tspan
-	 x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
-	 y="-5054.1064"
-	 sodipodi:role="line"
-	 id="tspan3681">1456783262562462322</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text3683"
-       x="842.29962 883.42694 924.55408"
-       y="-4943.1509"><tspan
-	 x="842.29962 883.42694 924.55408"
-	 y="-4943.1509"
-	 sodipodi:role="line"
-	 id="tspan3685">308</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text3687"
-       x="842.29962 883.42694 924.55408"
-       y="-5054.1064"><tspan
-	 x="842.29962 883.42694 924.55408"
-	 y="-5054.1064"
-	 sodipodi:role="line"
-	 id="tspan3689">621</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text3691"
-       x="1212.1489 1253.276 1294.4033"
-       y="-4943.1509"><tspan
-	 x="1212.1489 1253.276 1294.4033"
-	 y="-4943.1509"
-	 sodipodi:role="line"
-	 id="tspan3693">309</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text3695"
-       x="1212.1489 1253.276 1294.4033"
-       y="-5054.1064"><tspan
-	 x="1212.1489 1253.276 1294.4033"
-	 y="-5054.1064"
-	 sodipodi:role="line"
-	 id="tspan3697">622</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text3699"
-       x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
-       y="-3648.6792"><tspan
-	 x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
-	 y="-3648.6792"
-	 sodipodi:role="line"
-	 id="tspan3701">2nd field</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4083"
-       x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
-       y="-4129.4834"><tspan
-	 x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
-	 y="-4129.4834"
-	 sodipodi:role="line"
-	 id="tspan4085">765432313312311</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4087"
-       x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
-       y="-4240.4385"><tspan
-	 x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
-	 y="-4240.4385"
-	 sodipodi:role="line"
-	 id="tspan4089">336335321320319318317316315314313312311</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4091"
-       x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
-       y="-4129.4834"><tspan
-	 x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
-	 y="-4129.4834"
-	 sodipodi:role="line"
-	 id="tspan4093">182223309</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4095"
-       x="842.30634 883.43323 924.56055"
-       y="-4240.4385"><tspan
-	 x="842.30634 883.43323 924.56055"
-	 y="-4240.4385"
-	 sodipodi:role="line"
-	 id="tspan4097">309</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4099"
-       x="1212.1553 1253.2826 1294.4099"
-       y="-4129.4834"><tspan
-	 x="1212.1553 1253.2826 1294.4099"
-	 y="-4129.4834"
-	 sodipodi:role="line"
-	 id="tspan4101">310</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4103"
-       x="1212.1553 1253.2826 1294.4099"
-       y="-4240.4385"><tspan
-	 x="1212.1553 1253.2826 1294.4099"
-	 y="-4240.4385"
-	 sodipodi:role="line"
-	 id="tspan4105">310</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4107"
-       x="6410.605 6451.7319"
-       y="-4129.4834"><tspan
-	 x="6410.605 6451.7319"
-	 y="-4129.4834"
-	 sodipodi:role="line"
-	 id="tspan4109">24</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4111"
-       x="6390.041 6431.1685 6472.2954"
-       y="-4240.4385"><tspan
-	 x="6390.041 6431.1685 6472.2954"
-	 y="-4240.4385"
-	 sodipodi:role="line"
-	 id="tspan4113">337</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4115"
-       x="6040.7559 6081.8833"
-       y="-4943.1504"><tspan
-	 x="6040.7559 6081.8833"
-	 y="-4943.1504"
-	 sodipodi:role="line"
-	 id="tspan4117">23</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4119"
-       x="6040.7559 6081.8833"
-       y="-5054.106"><tspan
-	 x="6040.7559 6081.8833"
-	 y="-5054.106"
-	 sodipodi:role="line"
-	 id="tspan4121">23</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4123"
-       x="6410.605 6451.7324"
-       y="-4943.1504"><tspan
-	 x="6410.605 6451.7324"
-	 y="-4943.1504"
-	 sodipodi:role="line"
-	 id="tspan4125">24</tspan></text>
-<text
-       transform="scale(1,-1)"
-       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       id="text4127"
-       x="6410.605 6451.7324"
-       y="-5054.106"><tspan
-	 x="6410.605 6451.7324"
-	 y="-5054.106"
-	 sodipodi:role="line"
-	 id="tspan4129">24</tspan></text>
-</g></svg>
diff --git a/Documentation/media/uapi/v4l/vbi_hsync.svg b/Documentation/media/uapi/v4l/vbi_hsync.svg
deleted file mode 100644
index f8e979ada7e3..000000000000
--- a/Documentation/media/uapi/v4l/vbi_hsync.svg
+++ /dev/null
@@ -1,321 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the GNU Free Documentation License,
-    Version 1.1 or any later version published by the Free Software
-    Foundation, with no Invariant Sections, no Front-Cover Texts
-    and no Back-Cover Texts. A copy of the license is included at
-    Documentation/media/uapi/fdl-appendix.rst.
-
-    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   xml:space="preserve"
-   width="192.39857mm"
-   height="146.83536mm"
-   viewBox="0 0 681.72724 520.28277"
-   sodipodi:docname="vbi_hsync.svg"><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview4"
-     showgrid="false"
-     inkscape:zoom="1.5350601"
-     inkscape:cx="131.95463"
-     inkscape:cy="428.88132"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="g10"
-     units="mm"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0" /><metadata
-     id="metadata8"><rdf:RDF><cc:Work
-	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
-     id="defs6"><clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath30"><path
-	 d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 187.184,836.05 0,-19.278 48.517,0 -38.556,9.639 38.556,9.639 -48.517,0 z m 689.189,-19.278 0,19.278 -48.516,0 38.556,-9.639 -38.556,-9.639 48.516,0 z"
-	 id="path32"
-	 inkscape:connector-curvature="0"
-	 style="clip-rule:evenodd" /></clipPath><clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath52"><path
-	 d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 804.08,79.3887 0,19.2778 -48.516,0 38.556,-9.6389 -38.556,-9.6389 48.516,0 z m -703.647,19.2778 0,-19.2778 48.517,0 -38.556,9.6389 38.556,9.6389 -48.517,0 z"
-	 id="path54"
-	 inkscape:connector-curvature="0"
-	 style="clip-rule:evenodd" /></clipPath><clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath94"><path
-	 d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 471.535,195.057 0,19.278 -48.516,0 38.555,-9.639 -38.555,-9.639 48.516,0 z m -284.351,19.278 0,-19.278 48.517,0 -38.556,9.639 38.556,9.639 -48.517,0 z"
-	 id="path96"
-	 inkscape:connector-curvature="0"
-	 style="clip-rule:evenodd" /></clipPath></defs><g
-     id="g10"
-     inkscape:groupmode="layer"
-     inkscape:label="vbi_hsync"
-     transform="matrix(1.25,0,0,-1.25,-0.3625824,520.79867)"><g
-       id="g14"
-       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
-       style=""><path
-	 inkscape:connector-curvature="0"
-	 id="path16"
-	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="M 32.9604,580.617 4.04346,493.866" /><path
-	 inkscape:connector-curvature="0"
-	 id="path18"
-	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 192.004,855.328 0,-665.091" /><path
-	 inkscape:connector-curvature="0"
-	 id="path20"
-	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 466.715,392.656 0,-202.419" /><path
-	 inkscape:connector-curvature="0"
-	 id="path22"
-	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 799.261,508.324 0,-433.7549" /><path
-	 inkscape:connector-curvature="0"
-	 id="path24"
-	 style="fill:none;stroke:#000000;stroke-width:4.81949997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 857.095,537.241 231.335,0" /></g><g
-       id="g26"
-       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
-       style=""><g
-	 clip-path="url(#clipPath30)"
-	 id="g28"
-	 style=""><path
-	   inkscape:connector-curvature="0"
-	   id="path34"
-	   style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   d="m 871.553,826.411 -679.549,0" /></g></g><g
-       id="g36"
-       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
-       style=""><path
-	 inkscape:connector-curvature="0"
-	 id="path38"
-	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-	 d="m 827.857,816.772 38.556,9.639 -38.556,9.639 0,-19.278" /><path
-	 inkscape:connector-curvature="0"
-	 id="path40"
-	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 827.857,816.772 38.556,9.639 -38.556,9.639 0,-19.278 z" /><path
-	 inkscape:connector-curvature="0"
-	 id="path42"
-	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-	 d="m 235.701,836.05 -38.556,-9.639 38.556,-9.639 0,19.278" /><path
-	 inkscape:connector-curvature="0"
-	 id="path44"
-	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 235.701,836.05 -38.556,-9.639 38.556,-9.639 0,19.278 z" /><path
-	 inkscape:connector-curvature="0"
-	 id="path46"
-	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	 d="m 1073.97,493.866 28.92,86.751" /></g><g
-       id="g48"
-       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
-       style=""><g
-	 clip-path="url(#clipPath52)"
-	 id="g50"
-	 style=""><path
-	   inkscape:connector-curvature="0"
-	   id="path56"
-	   style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   d="m 105.253,89.0276 694.008,0" /></g></g><path
-       d="m 52.91205,34.475403 -13.891817,-3.472918 13.891817,-3.472918 0,6.945836"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path60"
-       inkscape:connector-curvature="0" /><path
-       d="m 52.91205,34.475403 -13.891817,-3.472918 13.891817,-3.472918 0,6.945836 z"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path62"
-       inkscape:connector-curvature="0" /><path
-       d="m 271.4765,27.529567 13.89182,3.472918 -13.89182,3.472918 0,-6.945836"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path64"
-       inkscape:connector-curvature="0" /><path
-       d="m 271.4765,27.529567 13.89182,3.472918 -13.89182,3.472918 0,-6.945836 z"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path66"
-       inkscape:connector-curvature="0" /><path
-       d="m 5.9113292,192.49483 31.2565888,0 0,-10.41887 26.046978,0 10.418863,-93.769765 88.560511,0 10.41887,93.769765 10.41886,0"
-       style="fill:none;stroke:#000000;stroke-width:1.73647714;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path68"
-       inkscape:connector-curvature="0" /><path
-       d="m 162.19427,88.306195 260.47086,0"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path70"
-       inkscape:connector-curvature="0" /><path
-       d="m 37.167918,182.07596 0,-156.282907"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path72"
-       inkscape:connector-curvature="0" /><path
-       d="m 235.12632,182.07596 52.09431,0 0,10.41887 20.83773,0 10.41886,208.3769 83.35162,0"
-       style="fill:none;stroke:#000000;stroke-width:1.73647714;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path74"
-       inkscape:connector-curvature="0" /><path
-       d="m 391.4089,192.49483 31.25623,0"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path76"
-       inkscape:connector-curvature="0" /><path
-       d="m 401.82884,400.87173 20.83629,0"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path78"
-       inkscape:connector-curvature="0" /><path
-       d="m 328.89608,192.49483 10.41887,208.3769"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path80"
-       inkscape:connector-curvature="0" /><path
-       d="m 349.73381,192.49483 10.41886,208.3769"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path82"
-       inkscape:connector-curvature="0" /><path
-       d="m 370.57262,192.49483 10.41634,208.3769"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path84"
-       inkscape:connector-curvature="0" /><path
-       d="m 396.61887,385.24541 10.41995,31.25623"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path86"
-       inkscape:connector-curvature="0" /><path
-       d="m 183.032,135.19126 52.09432,0 0,93.76977 -52.09432,0 0,-93.76977 z"
-       style="fill:none;stroke:#000000;stroke-width:1.73647714;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path88"
-       inkscape:connector-curvature="0" /><g
-       id="g90"
-       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
-       style=""><g
-	 clip-path="url(#clipPath94)"
-	 id="g92"
-	 style=""><path
-	   inkscape:connector-curvature="0"
-	   id="path98"
-	   style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-	   d="m 192.004,204.696 274.711,0" /></g></g><path
-       d="m 84.168639,76.151036 -13.891817,-3.472955 13.891817,-3.472954 0,6.945909"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path102"
-       inkscape:connector-curvature="0" /><path
-       d="m 84.168639,76.151036 -13.891817,-3.472955 13.891817,-3.472954 0,6.945909 z"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path104"
-       inkscape:connector-curvature="0" /><path
-       d="m 151.65975,69.205127 13.89146,3.472954 -13.89146,3.472955 0,-6.945909"
-       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
-       id="path106"
-       inkscape:connector-curvature="0" /><path
-       d="m 151.65975,69.205127 13.89146,3.472954 -13.89146,3.472955 0,-6.945909 z"
-       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
-       id="path108"
-       inkscape:connector-curvature="0" /><text
-       id="text112"
-       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"
-       x="438.29504"
-       y="-187.28558"><tspan
-	 id="tspan114"
-	 sodipodi:role="line"
-	 y="-187.28558"
-	 x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234">Black Level</tspan><tspan
-	 id="tspan116"
-	 sodipodi:role="line"
-	 y="-83.096947"
-	 x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636">Sync Level</tspan><tspan
-	 id="tspan118"
-	 sodipodi:role="line"
-	 y="-395.66284"
-	 x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text>
-<text
-       id="text120"
-       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"
-       x="159.88258"
-       y="-270.63647"><tspan
-	 id="tspan122"
-	 sodipodi:role="line"
-	 y="-270.63647"
-	 x="159.88258 172.61443 179.55339 186.49236 198.07812 209.66391">offset</tspan></text>
-<text
-       id="text124"
-       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"
-       x="46.973549"
-       y="-46.630745"><tspan
-	 id="tspan126"
-	 sodipodi:role="line"
-	 y="-46.630745"
-	 x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319">Line synchr. pulse</tspan><tspan
-	 id="tspan128"
-	 sodipodi:role="line"
-	 y="-4.9552913"
-	 x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788">Line blanking</tspan></text>
-<text
-       id="text3473"
-       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"
-       x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319"
-       y="-46.630745"><tspan
-	 id="tspan3475"
-	 sodipodi:role="line"
-	 y="-46.630745"
-	 x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319">Line synchr. pulse</tspan></text>
-<text
-       id="text3477"
-       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"
-       x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788"
-       y="-4.9552913"><tspan
-	 id="tspan3479"
-	 sodipodi:role="line"
-	 y="-4.9552913"
-	 x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788">Line blanking</tspan></text>
-<text
-       id="text3607"
-       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"
-       x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234"
-       y="-187.28558"><tspan
-	 id="tspan3609"
-	 sodipodi:role="line"
-	 y="-187.28558"
-	 x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234">Black Level</tspan></text>
-<text
-       id="text3611"
-       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"
-       x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636"
-       y="-83.096947"><tspan
-	 id="tspan3613"
-	 sodipodi:role="line"
-	 y="-83.096947"
-	 x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636">Sync Level</tspan></text>
-<text
-       id="text3615"
-       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
-       transform="scale(1,-1)"
-       x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533"
-       y="-395.66284"><tspan
-	 id="tspan3617"
-	 sodipodi:role="line"
-	 y="-395.66284"
-	 x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text>
-</g></svg>
diff --git a/Documentation/media/uapi/v4l/video.rst b/Documentation/media/uapi/v4l/video.rst
deleted file mode 100644
index 69603b5efbb5..000000000000
--- a/Documentation/media/uapi/v4l/video.rst
+++ /dev/null
@@ -1,75 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _video:
-
-************************
-Video Inputs and Outputs
-************************
-
-Video inputs and outputs are physical connectors of a device. These can
-be for example: RF connectors (antenna/cable), CVBS a.k.a. Composite
-Video, S-Video and RGB connectors. Camera sensors are also considered to
-be a video input. Video and VBI capture devices have inputs. Video and
-VBI output devices have outputs, at least one each. Radio devices have
-no video inputs or outputs.
-
-To learn about the number and attributes of the available inputs and
-outputs applications can enumerate them with the
-:ref:`VIDIOC_ENUMINPUT` and
-:ref:`VIDIOC_ENUMOUTPUT` ioctl, respectively. The
-struct :c:type:`v4l2_input` returned by the
-:ref:`VIDIOC_ENUMINPUT` ioctl also contains signal
-status information applicable when the current video input is queried.
-
-The :ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` and
-:ref:`VIDIOC_G_OUTPUT <VIDIOC_G_OUTPUT>` ioctls return the index of
-the current video input or output. To select a different input or output
-applications call the :ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` and
-:ref:`VIDIOC_S_OUTPUT <VIDIOC_G_OUTPUT>` ioctls. Drivers must
-implement all the input ioctls when the device has one or more inputs,
-all the output ioctls when the device has one or more outputs.
-
-Example: Information about the current video input
-==================================================
-
-.. code-block:: c
-
-    struct v4l2_input input;
-    int index;
-
-    if (-1 == ioctl(fd, VIDIOC_G_INPUT, &index)) {
-	perror("VIDIOC_G_INPUT");
-	exit(EXIT_FAILURE);
-    }
-
-    memset(&input, 0, sizeof(input));
-    input.index = index;
-
-    if (-1 == ioctl(fd, VIDIOC_ENUMINPUT, &input)) {
-	perror("VIDIOC_ENUMINPUT");
-	exit(EXIT_FAILURE);
-    }
-
-    printf("Current input: %s\\n", input.name);
-
-
-Example: Switching to the first video input
-===========================================
-
-.. code-block:: c
-
-    int index;
-
-    index = 0;
-
-    if (-1 == ioctl(fd, VIDIOC_S_INPUT, &index)) {
-	perror("VIDIOC_S_INPUT");
-	exit(EXIT_FAILURE);
-    }
diff --git a/Documentation/media/uapi/v4l/videodev.rst b/Documentation/media/uapi/v4l/videodev.rst
deleted file mode 100644
index fa3d3398930a..000000000000
--- a/Documentation/media/uapi/v4l/videodev.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _videodev:
-
-*******************************
-Video For Linux Two Header File
-*******************************
-
-.. kernel-include:: $BUILDDIR/videodev2.h.rst
diff --git a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst
deleted file mode 100644
index bd08e4f77ae4..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst
+++ /dev/null
@@ -1,141 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_CREATE_BUFS:
-
-************************
-ioctl VIDIOC_CREATE_BUFS
-************************
-
-Name
-====
-
-VIDIOC_CREATE_BUFS - Create buffers for Memory Mapped or User Pointer or DMA Buffer I/O
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_CREATE_BUFS, struct v4l2_create_buffers *argp )
-    :name: VIDIOC_CREATE_BUFS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_create_buffers`.
-
-
-Description
-===========
-
-This ioctl is used to create buffers for :ref:`memory mapped <mmap>`
-or :ref:`user pointer <userp>` or :ref:`DMA buffer <dmabuf>` I/O. It
-can be used as an alternative or in addition to the
-:ref:`VIDIOC_REQBUFS` ioctl, when a tighter control
-over buffers is required. This ioctl can be called multiple times to
-create buffers of different sizes.
-
-To allocate the device buffers applications must initialize the relevant
-fields of the struct :c:type:`v4l2_create_buffers` structure. The
-``count`` field must be set to the number of requested buffers, the
-``memory`` field specifies the requested I/O method and the ``reserved``
-array must be zeroed.
-
-The ``format`` field specifies the image format that the buffers must be
-able to handle. The application has to fill in this struct
-:c:type:`v4l2_format`. Usually this will be done using the
-:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` or
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctls to ensure that the
-requested format is supported by the driver. Based on the format's
-``type`` field the requested buffer size (for single-planar) or plane
-sizes (for multi-planar formats) will be used for the allocated buffers.
-The driver may return an error if the size(s) are not supported by the
-hardware (usually because they are too small).
-
-The buffers created by this ioctl will have as minimum size the size
-defined by the ``format.pix.sizeimage`` field (or the corresponding
-fields for other format types). Usually if the ``format.pix.sizeimage``
-field is less than the minimum required for the given format, then an
-error will be returned since drivers will typically not allow this. If
-it is larger, then the value will be used as-is. In other words, the
-driver may reject the requested size, but if it is accepted the driver
-will use it unchanged.
-
-When the ioctl is called with a pointer to this structure the driver
-will attempt to allocate up to the requested number of buffers and store
-the actual number allocated and the starting index in the ``count`` and
-the ``index`` fields respectively. On return ``count`` can be smaller
-than the number requested.
-
-
-.. c:type:: v4l2_create_buffers
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_create_buffers
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - The starting buffer index, returned by the driver.
-    * - __u32
-      - ``count``
-      - The number of buffers requested or granted. If count == 0, then
-	:ref:`VIDIOC_CREATE_BUFS` will set ``index`` to the current number of
-	created buffers, and it will check the validity of ``memory`` and
-	``format.type``. If those are invalid -1 is returned and errno is
-	set to ``EINVAL`` error code, otherwise :ref:`VIDIOC_CREATE_BUFS` returns
-	0. It will never set errno to ``EBUSY`` error code in this particular
-	case.
-    * - __u32
-      - ``memory``
-      - Applications set this field to ``V4L2_MEMORY_MMAP``,
-	``V4L2_MEMORY_DMABUF`` or ``V4L2_MEMORY_USERPTR``. See
-	:c:type:`v4l2_memory`
-    * - struct :c:type:`v4l2_format`
-      - ``format``
-      - Filled in by the application, preserved by the driver.
-    * - __u32
-      - ``capabilities``
-      - Set by the driver. If 0, then the driver doesn't support
-        capabilities. In that case all you know is that the driver is
-	guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support
-	other :c:type:`v4l2_memory` types. It will not support any others
-	capabilities. See :ref:`here <v4l2-buf-capabilities>` for a list of the
-	capabilities.
-
-	If you want to just query the capabilities without making any
-	other changes, then set ``count`` to 0, ``memory`` to
-	``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type.
-    * - __u32
-      - ``reserved``\ [7]
-      - A place holder for future extensions. Drivers and applications
-	must set the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-ENOMEM
-    No memory to allocate buffers for :ref:`memory mapped <mmap>` I/O.
-
-EINVAL
-    The buffer type (``format.type`` field), requested I/O method
-    (``memory``) or format (``format`` field) is not valid.
diff --git a/Documentation/media/uapi/v4l/vidioc-cropcap.rst b/Documentation/media/uapi/v4l/vidioc-cropcap.rst
deleted file mode 100644
index 019d3d3a0e0d..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-cropcap.rst
+++ /dev/null
@@ -1,143 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_CROPCAP:
-
-********************
-ioctl VIDIOC_CROPCAP
-********************
-
-Name
-====
-
-VIDIOC_CROPCAP - Information about the video cropping and scaling abilities
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_CROPCAP, struct v4l2_cropcap *argp )
-    :name: VIDIOC_CROPCAP
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_cropcap`.
-
-
-Description
-===========
-
-Applications use this function to query the cropping limits, the pixel
-aspect of images and to calculate scale factors. They set the ``type``
-field of a v4l2_cropcap structure to the respective buffer (stream)
-type and call the :ref:`VIDIOC_CROPCAP` ioctl with a pointer to this
-structure. Drivers fill the rest of the structure. The results are
-constant except when switching the video standard. Remember this switch
-can occur implicit when switching the video input or output.
-
-This ioctl must be implemented for video capture or output devices that
-support cropping and/or scaling and/or have non-square pixels, and for
-overlay devices.
-
-.. c:type:: v4l2_cropcap
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_cropcap
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - Type of the data stream, set by the application. Only these types
-	are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
-	``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and
-	``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note below.
-    * - struct :ref:`v4l2_rect <v4l2-rect-crop>`
-      - ``bounds``
-      - Defines the window within capturing or output is possible, this
-	may exclude for example the horizontal and vertical blanking
-	areas. The cropping rectangle cannot exceed these limits. Width
-	and height are defined in pixels, the driver writer is free to
-	choose origin and units of the coordinate system in the analog
-	domain.
-    * - struct :ref:`v4l2_rect <v4l2-rect-crop>`
-      - ``defrect``
-      - Default cropping rectangle, it shall cover the "whole picture".
-	Assuming pixel aspect 1/1 this could be for example a 640 × 480
-	rectangle for NTSC, a 768 × 576 rectangle for PAL and SECAM
-	centered over the active picture area. The same co-ordinate system
-	as for ``bounds`` is used.
-    * - struct :c:type:`v4l2_fract`
-      - ``pixelaspect``
-      - This is the pixel aspect (y / x) when no scaling is applied, the
-	ratio of the actual sampling frequency and the frequency required
-	to get square pixels.
-
-	When cropping coordinates refer to square pixels, the driver sets
-	``pixelaspect`` to 1/1. Other common values are 54/59 for PAL and
-	SECAM, 11/10 for NTSC sampled according to [:ref:`itu601`].
-
-.. note::
-   Unfortunately in the case of multiplanar buffer types
-   (``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``)
-   this API was messed up with regards to how the :c:type:`v4l2_cropcap` ``type`` field
-   should be filled in. Some drivers only accepted the ``_MPLANE`` buffer type while
-   other drivers only accepted a non-multiplanar buffer type (i.e. without the
-   ``_MPLANE`` at the end).
-
-   Starting with kernel 4.13 both variations are allowed.
-
-
-
-.. _v4l2-rect-crop:
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_rect
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __s32
-      - ``left``
-      - Horizontal offset of the top, left corner of the rectangle, in
-	pixels.
-    * - __s32
-      - ``top``
-      - Vertical offset of the top, left corner of the rectangle, in
-	pixels.
-    * - __u32
-      - ``width``
-      - Width of the rectangle, in pixels.
-    * - __u32
-      - ``height``
-      - Height of the rectangle, in pixels.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_cropcap` ``type`` is
-    invalid.
-
-ENODATA
-    Cropping is not supported for this input or output.
diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst
deleted file mode 100644
index d38031dbe4e4..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst
+++ /dev/null
@@ -1,167 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_DBG_G_CHIP_INFO:
-
-****************************
-ioctl VIDIOC_DBG_G_CHIP_INFO
-****************************
-
-Name
-====
-
-VIDIOC_DBG_G_CHIP_INFO - Identify the chips on a TV card
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_DBG_G_CHIP_INFO, struct v4l2_dbg_chip_info *argp )
-    :name: VIDIOC_DBG_G_CHIP_INFO
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_dbg_chip_info`.
-
-
-Description
-===========
-
-.. note::
-
-    This is an :ref:`experimental` interface and may
-    change in the future.
-
-For driver debugging purposes this ioctl allows test applications to
-query the driver about the chips present on the TV card. Regular
-applications must not use it. When you found a chip specific bug, please
-contact the linux-media mailing list
-(`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__)
-so it can be fixed.
-
-Additionally the Linux kernel must be compiled with the
-``CONFIG_VIDEO_ADV_DEBUG`` option to enable this ioctl.
-
-To query the driver applications must initialize the ``match.type`` and
-``match.addr`` or ``match.name`` fields of a struct
-:c:type:`v4l2_dbg_chip_info` and call
-:ref:`VIDIOC_DBG_G_CHIP_INFO` with a pointer to this structure. On success
-the driver stores information about the selected chip in the ``name``
-and ``flags`` fields.
-
-When ``match.type`` is ``V4L2_CHIP_MATCH_BRIDGE``, ``match.addr``
-selects the nth bridge 'chip' on the TV card. You can enumerate all
-chips by starting at zero and incrementing ``match.addr`` by one until
-:ref:`VIDIOC_DBG_G_CHIP_INFO` fails with an ``EINVAL`` error code. The number
-zero always selects the bridge chip itself, e. g. the chip connected to
-the PCI or USB bus. Non-zero numbers identify specific parts of the
-bridge chip such as an AC97 register block.
-
-When ``match.type`` is ``V4L2_CHIP_MATCH_SUBDEV``, ``match.addr``
-selects the nth sub-device. This allows you to enumerate over all
-sub-devices.
-
-On success, the ``name`` field will contain a chip name and the
-``flags`` field will contain ``V4L2_CHIP_FL_READABLE`` if the driver
-supports reading registers from the device or ``V4L2_CHIP_FL_WRITABLE``
-if the driver supports writing registers to the device.
-
-We recommended the v4l2-dbg utility over calling this ioctl directly. It
-is available from the LinuxTV v4l-dvb repository; see
-`https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
-instructions.
-
-
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
-
-.. _name-v4l2-dbg-match:
-
-.. flat-table:: struct v4l2_dbg_match
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - See :ref:`name-chip-match-types` for a list of possible types.
-    * - union {
-      - (anonymous)
-    * - __u32
-      - ``addr``
-      - Match a chip by this number, interpreted according to the ``type``
-	field.
-    * - char
-      - ``name[32]``
-      - Match a chip by this name, interpreted according to the ``type``
-	field. Currently unused.
-    * - }
-      -
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_dbg_chip_info
-
-.. flat-table:: struct v4l2_dbg_chip_info
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - struct v4l2_dbg_match
-      - ``match``
-      - How to match the chip, see :ref:`name-v4l2-dbg-match`.
-    * - char
-      - ``name[32]``
-      - The name of the chip.
-    * - __u32
-      - ``flags``
-      - Set by the driver. If ``V4L2_CHIP_FL_READABLE`` is set, then the
-	driver supports reading registers from the device. If
-	``V4L2_CHIP_FL_WRITABLE`` is set, then it supports writing
-	registers.
-    * - __u32
-      - ``reserved[8]``
-      - Reserved fields, both application and driver must set these to 0.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _name-chip-match-types:
-
-.. flat-table:: Chip Match Types
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_CHIP_MATCH_BRIDGE``
-      - 0
-      - Match the nth chip on the card, zero for the bridge chip. Does not
-	match sub-devices.
-    * - ``V4L2_CHIP_MATCH_SUBDEV``
-      - 4
-      - Match the nth sub-device.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The ``match_type`` is invalid or no device could be matched.
diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst
deleted file mode 100644
index 112597c6cad2..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst
+++ /dev/null
@@ -1,171 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_DBG_G_REGISTER:
-
-**************************************************
-ioctl VIDIOC_DBG_G_REGISTER, VIDIOC_DBG_S_REGISTER
-**************************************************
-
-Name
-====
-
-VIDIOC_DBG_G_REGISTER - VIDIOC_DBG_S_REGISTER - Read or write hardware registers
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_DBG_G_REGISTER, struct v4l2_dbg_register *argp )
-    :name: VIDIOC_DBG_G_REGISTER
-
-.. c:function:: int ioctl( int fd, VIDIOC_DBG_S_REGISTER, const struct v4l2_dbg_register *argp )
-    :name: VIDIOC_DBG_S_REGISTER
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_dbg_register`.
-
-
-Description
-===========
-
-.. note::
-
-    This is an :ref:`experimental` interface and may
-    change in the future.
-
-For driver debugging purposes these ioctls allow test applications to
-access hardware registers directly. Regular applications must not use
-them.
-
-Since writing or even reading registers can jeopardize the system
-security, its stability and damage the hardware, both ioctls require
-superuser privileges. Additionally the Linux kernel must be compiled
-with the ``CONFIG_VIDEO_ADV_DEBUG`` option to enable these ioctls.
-
-To write a register applications must initialize all fields of a struct
-:c:type:`v4l2_dbg_register` except for ``size`` and
-call ``VIDIOC_DBG_S_REGISTER`` with a pointer to this structure. The
-``match.type`` and ``match.addr`` or ``match.name`` fields select a chip
-on the TV card, the ``reg`` field specifies a register number and the
-``val`` field the value to be written into the register.
-
-To read a register applications must initialize the ``match.type``,
-``match.addr`` or ``match.name`` and ``reg`` fields, and call
-``VIDIOC_DBG_G_REGISTER`` with a pointer to this structure. On success
-the driver stores the register value in the ``val`` field and the size
-(in bytes) of the value in ``size``.
-
-When ``match.type`` is ``V4L2_CHIP_MATCH_BRIDGE``, ``match.addr``
-selects the nth non-sub-device chip on the TV card. The number zero
-always selects the host chip, e. g. the chip connected to the PCI or USB
-bus. You can find out which chips are present with the
-:ref:`VIDIOC_DBG_G_CHIP_INFO` ioctl.
-
-When ``match.type`` is ``V4L2_CHIP_MATCH_SUBDEV``, ``match.addr``
-selects the nth sub-device.
-
-These ioctls are optional, not all drivers may support them. However
-when a driver supports these ioctls it must also support
-:ref:`VIDIOC_DBG_G_CHIP_INFO`. Conversely
-it may support ``VIDIOC_DBG_G_CHIP_INFO`` but not these ioctls.
-
-``VIDIOC_DBG_G_REGISTER`` and ``VIDIOC_DBG_S_REGISTER`` were introduced
-in Linux 2.6.21, but their API was changed to the one described here in
-kernel 2.6.29.
-
-We recommended the v4l2-dbg utility over calling these ioctls directly.
-It is available from the LinuxTV v4l-dvb repository; see
-`https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
-instructions.
-
-
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
-
-.. c:type:: v4l2_dbg_match
-
-.. flat-table:: struct v4l2_dbg_match
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - See :ref:`chip-match-types` for a list of possible types.
-    * - union {
-      - (anonymous)
-    * - __u32
-      - ``addr``
-      - Match a chip by this number, interpreted according to the ``type``
-	field.
-    * - char
-      - ``name[32]``
-      - Match a chip by this name, interpreted according to the ``type``
-	field. Currently unused.
-    * - }
-      -
-
-
-
-.. c:type:: v4l2_dbg_register
-
-.. flat-table:: struct v4l2_dbg_register
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - struct v4l2_dbg_match
-      - ``match``
-      - How to match the chip, see :c:type:`v4l2_dbg_match`.
-    * - __u32
-      - ``size``
-      - The register size in bytes.
-    * - __u64
-      - ``reg``
-      - A register number.
-    * - __u64
-      - ``val``
-      - The value read from, or to be written into the register.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _chip-match-types:
-
-.. flat-table:: Chip Match Types
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_CHIP_MATCH_BRIDGE``
-      - 0
-      - Match the nth chip on the card, zero for the bridge chip. Does not
-	match sub-devices.
-    * - ``V4L2_CHIP_MATCH_SUBDEV``
-      - 4
-      - Match the nth sub-device.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EPERM
-    Insufficient permissions. Root privileges are required to execute
-    these ioctls.
diff --git a/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst b/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst
deleted file mode 100644
index 784c5980da8d..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst
+++ /dev/null
@@ -1,226 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_DECODER_CMD:
-
-************************************************
-ioctl VIDIOC_DECODER_CMD, VIDIOC_TRY_DECODER_CMD
-************************************************
-
-Name
-====
-
-VIDIOC_DECODER_CMD - VIDIOC_TRY_DECODER_CMD - Execute an decoder command
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_DECODER_CMD, struct v4l2_decoder_cmd *argp )
-    :name: VIDIOC_DECODER_CMD
-
-
-.. c:function:: int ioctl( int fd, VIDIOC_TRY_DECODER_CMD, struct v4l2_decoder_cmd *argp )
-    :name: VIDIOC_TRY_DECODER_CMD
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    pointer to struct :c:type:`v4l2_decoder_cmd`.
-
-
-Description
-===========
-
-These ioctls control an audio/video (usually MPEG-) decoder.
-``VIDIOC_DECODER_CMD`` sends a command to the decoder,
-``VIDIOC_TRY_DECODER_CMD`` can be used to try a command without actually
-executing it. To send a command applications must initialize all fields
-of a struct :c:type:`v4l2_decoder_cmd` and call
-``VIDIOC_DECODER_CMD`` or ``VIDIOC_TRY_DECODER_CMD`` with a pointer to
-this structure.
-
-The ``cmd`` field must contain the command code. Some commands use the
-``flags`` field for additional information.
-
-A :ref:`write() <func-write>` or :ref:`VIDIOC_STREAMON`
-call sends an implicit START command to the decoder if it has not been
-started yet. Applies to both queues of mem2mem decoders.
-
-A :ref:`close() <func-close>` or :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`
-call of a streaming file descriptor sends an implicit immediate STOP
-command to the decoder, and all buffered data is discarded. Applies to both
-queues of mem2mem decoders.
-
-In principle, these ioctls are optional, not all drivers may support them. They were
-introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decoders
-(as further documented in :ref:`decoder`).
-
-
-.. tabularcolumns:: |p{1.1cm}|p{2.4cm}|p{1.2cm}|p{1.6cm}|p{10.6cm}|
-
-.. c:type:: v4l2_decoder_cmd
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_decoder_cmd
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 1 1 1 3
-
-    * - __u32
-      - ``cmd``
-      -
-      - The decoder command, see :ref:`decoder-cmds`.
-    * - __u32
-      - ``flags``
-      -
-      - Flags to go with the command. If no flags are defined for this
-	command, drivers and applications must set this field to zero.
-    * - union {
-      - (anonymous)
-    * - struct
-      - ``start``
-      -
-      - Structure containing additional data for the
-	``V4L2_DEC_CMD_START`` command.
-    * -
-      - __s32
-      - ``speed``
-      - Playback speed and direction. The playback speed is defined as
-	``speed``/1000 of the normal speed. So 1000 is normal playback.
-	Negative numbers denote reverse playback, so -1000 does reverse
-	playback at normal speed. Speeds -1, 0 and 1 have special
-	meanings: speed 0 is shorthand for 1000 (normal playback). A speed
-	of 1 steps just one frame forward, a speed of -1 steps just one
-	frame back.
-    * -
-      - __u32
-      - ``format``
-      - Format restrictions. This field is set by the driver, not the
-	application. Possible values are ``V4L2_DEC_START_FMT_NONE`` if
-	there are no format restrictions or ``V4L2_DEC_START_FMT_GOP`` if
-	the decoder operates on full GOPs (*Group Of Pictures*). This is
-	usually the case for reverse playback: the decoder needs full
-	GOPs, which it can then play in reverse order. So to implement
-	reverse playback the application must feed the decoder the last
-	GOP in the video file, then the GOP before that, etc. etc.
-    * - struct
-      - ``stop``
-      -
-      - Structure containing additional data for the ``V4L2_DEC_CMD_STOP``
-	command.
-    * -
-      - __u64
-      - ``pts``
-      - Stop playback at this ``pts`` or immediately if the playback is
-	already past that timestamp. Leave to 0 if you want to stop after
-	the last frame was decoded.
-    * - struct
-      - ``raw``
-    * -
-      - __u32
-      - ``data``\ [16]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-    * - }
-      -
-
-
-
-.. tabularcolumns:: |p{5.6cm}|p{0.6cm}|p{11.3cm}|
-
-.. _decoder-cmds:
-
-.. flat-table:: Decoder Commands
-    :header-rows:  0
-    :stub-columns: 0
-    :widths: 56 6 113
-
-    * - ``V4L2_DEC_CMD_START``
-      - 0
-      - Start the decoder. When the decoder is already running or paused,
-	this command will just change the playback speed. That means that
-	calling ``V4L2_DEC_CMD_START`` when the decoder was paused will
-	*not* resume the decoder. You have to explicitly call
-	``V4L2_DEC_CMD_RESUME`` for that. This command has one flag:
-	``V4L2_DEC_CMD_START_MUTE_AUDIO``. If set, then audio will be
-	muted when playing back at a non-standard speed.
-
-	For a device implementing the :ref:`decoder`, once the drain sequence
-	is initiated with the ``V4L2_DEC_CMD_STOP`` command, it must be driven
-	to completion before this command can be invoked.  Any attempt to
-	invoke the command while the drain sequence is in progress will trigger
-	an ``EBUSY`` error code.  The command may be also used to restart the
-	decoder in case of an implicit stop initiated by the decoder itself,
-	without the ``V4L2_DEC_CMD_STOP`` being called explicitly. See
-	:ref:`decoder` for more details.
-    * - ``V4L2_DEC_CMD_STOP``
-      - 1
-      - Stop the decoder. When the decoder is already stopped, this
-	command does nothing. This command has two flags: if
-	``V4L2_DEC_CMD_STOP_TO_BLACK`` is set, then the decoder will set
-	the picture to black after it stopped decoding. Otherwise the last
-	image will repeat. If
-	``V4L2_DEC_CMD_STOP_IMMEDIATELY`` is set, then the decoder stops
-	immediately (ignoring the ``pts`` value), otherwise it will keep
-	decoding until timestamp >= pts or until the last of the pending
-	data from its internal buffers was decoded.
-
-	For a device implementing the :ref:`decoder`, the command will initiate
-	the drain sequence as documented in :ref:`decoder`.  No flags or other
-	arguments are accepted in this case. Any attempt to invoke the command
-	again before the sequence completes will trigger an ``EBUSY`` error
-	code.
-    * - ``V4L2_DEC_CMD_PAUSE``
-      - 2
-      - Pause the decoder. When the decoder has not been started yet, the
-	driver will return an ``EPERM`` error code. When the decoder is
-	already paused, this command does nothing. This command has one
-	flag: if ``V4L2_DEC_CMD_PAUSE_TO_BLACK`` is set, then set the
-	decoder output to black when paused.
-    * - ``V4L2_DEC_CMD_RESUME``
-      - 3
-      - Resume decoding after a PAUSE command. When the decoder has not
-	been started yet, the driver will return an ``EPERM`` error code. When
-	the decoder is already running, this command does nothing. No
-	flags are defined for this command.
-    * - ``V4L2_DEC_CMD_FLUSH``
-      - 4
-      - Flush any held capture buffers. Only valid for stateless decoders.
-	This command is typically used when the application reached the
-	end of the stream and the last output buffer had the
-	``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag set. This would prevent
-	dequeueing the capture buffer containing the last decoded frame.
-	So this command can be used to explicitly flush that final decoded
-	frame. This command does nothing if there are no held capture buffers.
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EBUSY
-    A drain sequence of a device implementing the :ref:`decoder` is still in
-    progress. It is not allowed to issue another decoder command until it
-    completes.
-
-EINVAL
-    The ``cmd`` field is invalid.
-
-EPERM
-    The application sent a PAUSE or RESUME command when the decoder was
-    not running.
diff --git a/Documentation/media/uapi/v4l/vidioc-dqevent.rst b/Documentation/media/uapi/v4l/vidioc-dqevent.rst
deleted file mode 100644
index 2f37d255352a..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-dqevent.rst
+++ /dev/null
@@ -1,391 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_DQEVENT:
-
-********************
-ioctl VIDIOC_DQEVENT
-********************
-
-Name
-====
-
-VIDIOC_DQEVENT - Dequeue event
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_DQEVENT, struct v4l2_event *argp )
-    :name: VIDIOC_DQEVENT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_event`.
-
-
-Description
-===========
-
-Dequeue an event from a video device. No input is required for this
-ioctl. All the fields of the struct :c:type:`v4l2_event`
-structure are filled by the driver. The file handle will also receive
-exceptions which the application may get by e.g. using the select system
-call.
-
-
-.. tabularcolumns:: |p{3.0cm}|p{4.4cm}|p{2.4cm}|p{7.7cm}|
-
-.. c:type:: v4l2_event
-
-.. cssclass: longtable
-
-.. flat-table:: struct v4l2_event
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - Type of the event, see :ref:`event-type`.
-    * - union {
-      - ``u``
-    * - struct :c:type:`v4l2_event_vsync`
-      - ``vsync``
-      - Event data for event ``V4L2_EVENT_VSYNC``.
-    * - struct :c:type:`v4l2_event_ctrl`
-      - ``ctrl``
-      - Event data for event ``V4L2_EVENT_CTRL``.
-    * - struct :c:type:`v4l2_event_frame_sync`
-      - ``frame_sync``
-      - Event data for event ``V4L2_EVENT_FRAME_SYNC``.
-    * - struct :c:type:`v4l2_event_motion_det`
-      - ``motion_det``
-      - Event data for event V4L2_EVENT_MOTION_DET.
-    * - struct :c:type:`v4l2_event_src_change`
-      - ``src_change``
-      - Event data for event V4L2_EVENT_SOURCE_CHANGE.
-    * - __u8
-      - ``data``\ [64]
-      - Event data. Defined by the event type. The union should be used to
-	define easily accessible type for events.
-    * - }
-      -
-    * - __u32
-      - ``pending``
-      - Number of pending events excluding this one.
-    * - __u32
-      - ``sequence``
-      - Event sequence number. The sequence number is incremented for
-	every subscribed event that takes place. If sequence numbers are
-	not contiguous it means that events have been lost.
-    * - struct timespec
-      - ``timestamp``
-      - Event timestamp. The timestamp has been taken from the
-	``CLOCK_MONOTONIC`` clock. To access the same clock outside V4L2,
-	use :c:func:`clock_gettime`.
-    * - u32
-      - ``id``
-      - The ID associated with the event source. If the event does not
-	have an associated ID (this depends on the event type), then this
-	is 0.
-    * - __u32
-      - ``reserved``\ [8]
-      - Reserved for future extensions. Drivers must set the array to
-	zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. cssclass:: longtable
-
-.. _event-type:
-
-.. flat-table:: Event Types
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_EVENT_ALL``
-      - 0
-      - All events. V4L2_EVENT_ALL is valid only for
-	VIDIOC_UNSUBSCRIBE_EVENT for unsubscribing all events at once.
-    * - ``V4L2_EVENT_VSYNC``
-      - 1
-      - This event is triggered on the vertical sync. This event has a
-	struct :c:type:`v4l2_event_vsync` associated
-	with it.
-    * - ``V4L2_EVENT_EOS``
-      - 2
-      - This event is triggered when the end of a stream is reached. This
-	is typically used with MPEG decoders to report to the application
-	when the last of the MPEG stream has been decoded.
-    * - ``V4L2_EVENT_CTRL``
-      - 3
-      - This event requires that the ``id`` matches the control ID from
-	which you want to receive events. This event is triggered if the
-	control's value changes, if a button control is pressed or if the
-	control's flags change. This event has a struct
-	:c:type:`v4l2_event_ctrl` associated with it.
-	This struct contains much of the same information as struct
-	:ref:`v4l2_queryctrl <v4l2-queryctrl>` and struct
-	:c:type:`v4l2_control`.
-
-	If the event is generated due to a call to
-	:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` or
-	:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, then the
-	event will *not* be sent to the file handle that called the ioctl
-	function. This prevents nasty feedback loops. If you *do* want to
-	get the event, then set the ``V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK``
-	flag.
-
-	This event type will ensure that no information is lost when more
-	events are raised than there is room internally. In that case the
-	struct :c:type:`v4l2_event_ctrl` of the
-	second-oldest event is kept, but the ``changes`` field of the
-	second-oldest event is ORed with the ``changes`` field of the
-	oldest event.
-    * - ``V4L2_EVENT_FRAME_SYNC``
-      - 4
-      - Triggered immediately when the reception of a frame has begun.
-	This event has a struct
-	:c:type:`v4l2_event_frame_sync`
-	associated with it.
-
-	If the hardware needs to be stopped in the case of a buffer
-	underrun it might not be able to generate this event. In such
-	cases the ``frame_sequence`` field in struct
-	:c:type:`v4l2_event_frame_sync` will not
-	be incremented. This causes two consecutive frame sequence numbers
-	to have n times frame interval in between them.
-    * - ``V4L2_EVENT_SOURCE_CHANGE``
-      - 5
-      - This event is triggered when a source parameter change is detected
-	during runtime by the video device. It can be a runtime resolution
-	change triggered by a video decoder or the format change happening
-	on an input connector. This event requires that the ``id`` matches
-	the input index (when used with a video device node) or the pad
-	index (when used with a subdevice node) from which you want to
-	receive events.
-
-	This event has a struct
-	:c:type:`v4l2_event_src_change`
-	associated with it. The ``changes`` bitfield denotes what has
-	changed for the subscribed pad. If multiple events occurred before
-	application could dequeue them, then the changes will have the
-	ORed value of all the events generated.
-    * - ``V4L2_EVENT_MOTION_DET``
-      - 6
-      - Triggered whenever the motion detection state for one or more of
-	the regions changes. This event has a struct
-	:c:type:`v4l2_event_motion_det`
-	associated with it.
-    * - ``V4L2_EVENT_PRIVATE_START``
-      - 0x08000000
-      - Base event number for driver-private events.
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_event_vsync
-
-.. flat-table:: struct v4l2_event_vsync
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u8
-      - ``field``
-      - The upcoming field. See enum :c:type:`v4l2_field`.
-
-
-
-.. tabularcolumns:: |p{3.5cm}|p{3.0cm}|p{1.8cm}|p{8.5cm}|
-
-.. c:type:: v4l2_event_ctrl
-
-.. flat-table:: struct v4l2_event_ctrl
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``changes``
-      - A bitmask that tells what has changed. See
-	:ref:`ctrl-changes-flags`.
-    * - __u32
-      - ``type``
-      - The type of the control. See enum
-	:c:type:`v4l2_ctrl_type`.
-    * - union {
-      - (anonymous)
-    * - __s32
-      - ``value``
-      - The 32-bit value of the control for 32-bit control types. This is
-	0 for string controls since the value of a string cannot be passed
-	using :ref:`VIDIOC_DQEVENT`.
-    * - __s64
-      - ``value64``
-      - The 64-bit value of the control for 64-bit control types.
-    * - }
-      -
-    * - __u32
-      - ``flags``
-      - The control flags. See :ref:`control-flags`.
-    * - __s32
-      - ``minimum``
-      - The minimum value of the control. See struct
-	:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
-    * - __s32
-      - ``maximum``
-      - The maximum value of the control. See struct
-	:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
-    * - __s32
-      - ``step``
-      - The step value of the control. See struct
-	:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
-    * - __s32
-      - ``default_value``
-      - The default value value of the control. See struct
-	:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_event_frame_sync
-
-.. flat-table:: struct v4l2_event_frame_sync
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``frame_sequence``
-      - The sequence number of the frame being received.
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_event_src_change
-
-.. flat-table:: struct v4l2_event_src_change
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``changes``
-      - A bitmask that tells what has changed. See
-	:ref:`src-changes-flags`.
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_event_motion_det
-
-.. flat-table:: struct v4l2_event_motion_det
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``flags``
-      - Currently only one flag is available: if
-	``V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ`` is set, then the
-	``frame_sequence`` field is valid, otherwise that field should be
-	ignored.
-    * - __u32
-      - ``frame_sequence``
-      - The sequence number of the frame being received. Only valid if the
-	``V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ`` flag was set.
-    * - __u32
-      - ``region_mask``
-      - The bitmask of the regions that reported motion. There is at least
-	one region. If this field is 0, then no motion was detected at
-	all. If there is no ``V4L2_CID_DETECT_MD_REGION_GRID`` control
-	(see :ref:`detect-controls`) to assign a different region to
-	each cell in the motion detection grid, then that all cells are
-	automatically assigned to the default region 0.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _ctrl-changes-flags:
-
-.. flat-table:: Control Changes
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_EVENT_CTRL_CH_VALUE``
-      - 0x0001
-      - This control event was triggered because the value of the control
-	changed. Special cases: Volatile controls do no generate this
-	event; If a control has the ``V4L2_CTRL_FLAG_EXECUTE_ON_WRITE``
-	flag set, then this event is sent as well, regardless its value.
-    * - ``V4L2_EVENT_CTRL_CH_FLAGS``
-      - 0x0002
-      - This control event was triggered because the control flags
-	changed.
-    * - ``V4L2_EVENT_CTRL_CH_RANGE``
-      - 0x0004
-      - This control event was triggered because the minimum, maximum,
-	step or the default value of the control changed.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _src-changes-flags:
-
-.. flat-table:: Source Changes
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_EVENT_SRC_CH_RESOLUTION``
-      - 0x0001
-      - This event gets triggered when a resolution change is detected at
-	an input. This can come from an input connector or from a video
-	decoder. Applications will have to query the new resolution (if
-	any, the signal may also have been lost).
-
-	For stateful decoders follow the guidelines in :ref:`decoder`.
-	Video Capture devices have to query the new timings using
-	:ref:`VIDIOC_QUERY_DV_TIMINGS` or
-	:ref:`VIDIOC_QUERYSTD <VIDIOC_QUERYSTD>`.
-
-	*Important*: even if the new video timings appear identical to the old
-	ones, receiving this event indicates that there was an issue with the
-	video signal and you must stop and restart streaming
-	(:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`
-	followed by :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`). The reason is
-	that many Video Capture devices are not able to recover from a temporary
-	loss of signal and so restarting streaming I/O is required in order for
-	the hardware to synchronize to the video signal.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst b/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst
deleted file mode 100644
index 1d0acbf14c4f..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst
+++ /dev/null
@@ -1,169 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_DV_TIMINGS_CAP:
-
-*********************************************************
-ioctl VIDIOC_DV_TIMINGS_CAP, VIDIOC_SUBDEV_DV_TIMINGS_CAP
-*********************************************************
-
-Name
-====
-
-VIDIOC_DV_TIMINGS_CAP - VIDIOC_SUBDEV_DV_TIMINGS_CAP - The capabilities of the Digital Video receiver/transmitter
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_DV_TIMINGS_CAP, struct v4l2_dv_timings_cap *argp )
-    :name: VIDIOC_DV_TIMINGS_CAP
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_DV_TIMINGS_CAP, struct v4l2_dv_timings_cap *argp )
-    :name: VIDIOC_SUBDEV_DV_TIMINGS_CAP
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_dv_timings_cap`.
-
-
-Description
-===========
-
-To query the capabilities of the DV receiver/transmitter applications
-initialize the ``pad`` field to 0, zero the reserved array of struct
-:c:type:`v4l2_dv_timings_cap` and call the
-``VIDIOC_DV_TIMINGS_CAP`` ioctl on a video node and the driver will fill
-in the structure.
-
-.. note::
-
-   Drivers may return different values after
-   switching the video input or output.
-
-When implemented by the driver DV capabilities of subdevices can be
-queried by calling the ``VIDIOC_SUBDEV_DV_TIMINGS_CAP`` ioctl directly
-on a subdevice node. The capabilities are specific to inputs (for DV
-receivers) or outputs (for DV transmitters), applications must specify
-the desired pad number in the struct
-:c:type:`v4l2_dv_timings_cap` ``pad`` field and
-zero the ``reserved`` array. Attempts to query capabilities on a pad
-that doesn't support them will return an ``EINVAL`` error code.
-
-
-.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}|
-
-.. c:type:: v4l2_bt_timings_cap
-
-.. flat-table:: struct v4l2_bt_timings_cap
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``min_width``
-      - Minimum width of the active video in pixels.
-    * - __u32
-      - ``max_width``
-      - Maximum width of the active video in pixels.
-    * - __u32
-      - ``min_height``
-      - Minimum height of the active video in lines.
-    * - __u32
-      - ``max_height``
-      - Maximum height of the active video in lines.
-    * - __u64
-      - ``min_pixelclock``
-      - Minimum pixelclock frequency in Hz.
-    * - __u64
-      - ``max_pixelclock``
-      - Maximum pixelclock frequency in Hz.
-    * - __u32
-      - ``standards``
-      - The video standard(s) supported by the hardware. See
-	:ref:`dv-bt-standards` for a list of standards.
-    * - __u32
-      - ``capabilities``
-      - Several flags giving more information about the capabilities. See
-	:ref:`dv-bt-cap-capabilities` for a description of the flags.
-    * - __u32
-      - ``reserved``\ [16]
-      - Reserved for future extensions.
-	Drivers must set the array to zero.
-
-
-
-.. tabularcolumns:: |p{1.0cm}|p{4.0cm}|p{3.5cm}|p{9.2cm}|
-
-.. c:type:: v4l2_dv_timings_cap
-
-.. flat-table:: struct v4l2_dv_timings_cap
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - Type of DV timings as listed in :ref:`dv-timing-types`.
-    * - __u32
-      - ``pad``
-      - Pad number as reported by the media controller API. This field is
-	only used when operating on a subdevice node. When operating on a
-	video node applications must set this field to zero.
-    * - __u32
-      - ``reserved``\ [2]
-      - Reserved for future extensions.
-
-	Drivers and applications must set the array to zero.
-    * - union {
-      - (anonymous)
-    * - struct :c:type:`v4l2_bt_timings_cap`
-      - ``bt``
-      - BT.656/1120 timings capabilities of the hardware.
-    * - __u32
-      - ``raw_data``\ [32]
-    * - }
-      -
-
-.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
-
-.. _dv-bt-cap-capabilities:
-
-.. flat-table:: DV BT Timing capabilities
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - Flag
-      - Description
-    * -
-      -
-    * - ``V4L2_DV_BT_CAP_INTERLACED``
-      - Interlaced formats are supported.
-    * - ``V4L2_DV_BT_CAP_PROGRESSIVE``
-      - Progressive formats are supported.
-    * - ``V4L2_DV_BT_CAP_REDUCED_BLANKING``
-      - CVT/GTF specific: the timings can make use of reduced blanking
-	(CVT) or the 'Secondary GTF' curve (GTF).
-    * - ``V4L2_DV_BT_CAP_CUSTOM``
-      - Can support non-standard timings, i.e. timings not belonging to
-	the standards set in the ``standards`` field.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst b/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst
deleted file mode 100644
index c313ca8b8cb5..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst
+++ /dev/null
@@ -1,168 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENCODER_CMD:
-
-************************************************
-ioctl VIDIOC_ENCODER_CMD, VIDIOC_TRY_ENCODER_CMD
-************************************************
-
-Name
-====
-
-VIDIOC_ENCODER_CMD - VIDIOC_TRY_ENCODER_CMD - Execute an encoder command
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENCODER_CMD, struct v4l2_encoder_cmd *argp )
-    :name: VIDIOC_ENCODER_CMD
-
-.. c:function:: int ioctl( int fd, VIDIOC_TRY_ENCODER_CMD, struct v4l2_encoder_cmd *argp )
-    :name: VIDIOC_TRY_ENCODER_CMD
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_encoder_cmd`.
-
-Description
-===========
-
-These ioctls control an audio/video (usually MPEG-) encoder.
-``VIDIOC_ENCODER_CMD`` sends a command to the encoder,
-``VIDIOC_TRY_ENCODER_CMD`` can be used to try a command without actually
-executing it.
-
-To send a command applications must initialize all fields of a struct
-:c:type:`v4l2_encoder_cmd` and call
-``VIDIOC_ENCODER_CMD`` or ``VIDIOC_TRY_ENCODER_CMD`` with a pointer to
-this structure.
-
-The ``cmd`` field must contain the command code. The ``flags`` field is
-currently only used by the STOP command and contains one bit: If the
-``V4L2_ENC_CMD_STOP_AT_GOP_END`` flag is set, encoding will continue
-until the end of the current *Group Of Pictures*, otherwise it will stop
-immediately.
-
-A :ref:`read() <func-read>` or :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`
-call sends an implicit START command to the encoder if it has not been
-started yet. After a STOP command, :ref:`read() <func-read>` calls will read
-the remaining data buffered by the driver. When the buffer is empty,
-:ref:`read() <func-read>` will return zero and the next :ref:`read() <func-read>`
-call will restart the encoder.
-
-A :ref:`close() <func-close>` or :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`
-call of a streaming file descriptor sends an implicit immediate STOP to
-the encoder, and all buffered data is discarded.
-
-These ioctls are optional, not all drivers may support them. They were
-introduced in Linux 2.6.21.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_encoder_cmd
-
-.. flat-table:: struct v4l2_encoder_cmd
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``cmd``
-      - The encoder command, see :ref:`encoder-cmds`.
-    * - __u32
-      - ``flags``
-      - Flags to go with the command, see :ref:`encoder-flags`. If no
-	flags are defined for this command, drivers and applications must
-	set this field to zero.
-    * - __u32
-      - ``data``\ [8]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _encoder-cmds:
-
-.. flat-table:: Encoder Commands
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_ENC_CMD_START``
-      - 0
-      - Start the encoder. When the encoder is already running or paused,
-	this command does nothing. No flags are defined for this command.
-    * - ``V4L2_ENC_CMD_STOP``
-      - 1
-      - Stop the encoder. When the ``V4L2_ENC_CMD_STOP_AT_GOP_END`` flag
-	is set, encoding will continue until the end of the current *Group
-	Of Pictures*, otherwise encoding will stop immediately. When the
-	encoder is already stopped, this command does nothing. mem2mem
-	encoders will send a ``V4L2_EVENT_EOS`` event when the last frame
-	has been encoded and all frames are ready to be dequeued and will
-	set the ``V4L2_BUF_FLAG_LAST`` buffer flag on the last buffer of
-	the capture queue to indicate there will be no new buffers
-	produced to dequeue. This buffer may be empty, indicated by the
-	driver setting the ``bytesused`` field to 0. Once the
-	``V4L2_BUF_FLAG_LAST`` flag was set, the
-	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will not block anymore,
-	but return an ``EPIPE`` error code.
-    * - ``V4L2_ENC_CMD_PAUSE``
-      - 2
-      - Pause the encoder. When the encoder has not been started yet, the
-	driver will return an ``EPERM`` error code. When the encoder is
-	already paused, this command does nothing. No flags are defined
-	for this command.
-    * - ``V4L2_ENC_CMD_RESUME``
-      - 3
-      - Resume encoding after a PAUSE command. When the encoder has not
-	been started yet, the driver will return an ``EPERM`` error code. When
-	the encoder is already running, this command does nothing. No
-	flags are defined for this command.
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _encoder-flags:
-
-.. flat-table:: Encoder Command Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_ENC_CMD_STOP_AT_GOP_END``
-      - 0x0001
-      - Stop encoding at the end of the current *Group Of Pictures*,
-	rather than immediately.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The ``cmd`` field is invalid.
-
-EPERM
-    The application sent a PAUSE or RESUME command when the encoder was
-    not running.
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst
deleted file mode 100644
index 0b286e19b46b..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst
+++ /dev/null
@@ -1,114 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUM_DV_TIMINGS:
-
-***********************************************************
-ioctl VIDIOC_ENUM_DV_TIMINGS, VIDIOC_SUBDEV_ENUM_DV_TIMINGS
-***********************************************************
-
-Name
-====
-
-VIDIOC_ENUM_DV_TIMINGS - VIDIOC_SUBDEV_ENUM_DV_TIMINGS - Enumerate supported Digital Video timings
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUM_DV_TIMINGS, struct v4l2_enum_dv_timings *argp )
-    :name: VIDIOC_ENUM_DV_TIMINGS
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_DV_TIMINGS, struct v4l2_enum_dv_timings *argp )
-    :name: VIDIOC_SUBDEV_ENUM_DV_TIMINGS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_enum_dv_timings`.
-
-
-Description
-===========
-
-While some DV receivers or transmitters support a wide range of timings,
-others support only a limited number of timings. With this ioctl
-applications can enumerate a list of known supported timings. Call
-:ref:`VIDIOC_DV_TIMINGS_CAP` to check if it
-also supports other standards or even custom timings that are not in
-this list.
-
-To query the available timings, applications initialize the ``index``
-field, set the ``pad`` field to 0, zero the reserved array of struct
-:c:type:`v4l2_enum_dv_timings` and call the
-``VIDIOC_ENUM_DV_TIMINGS`` ioctl on a video node with a pointer to this
-structure. Drivers fill the rest of the structure or return an ``EINVAL``
-error code when the index is out of bounds. To enumerate all supported
-DV timings, applications shall begin at index zero, incrementing by one
-until the driver returns ``EINVAL``.
-
-.. note::
-
-   Drivers may enumerate a different set of DV timings after
-   switching the video input or output.
-
-When implemented by the driver DV timings of subdevices can be queried
-by calling the ``VIDIOC_SUBDEV_ENUM_DV_TIMINGS`` ioctl directly on a
-subdevice node. The DV timings are specific to inputs (for DV receivers)
-or outputs (for DV transmitters), applications must specify the desired
-pad number in the struct
-:c:type:`v4l2_enum_dv_timings` ``pad`` field.
-Attempts to enumerate timings on a pad that doesn't support them will
-return an ``EINVAL`` error code.
-
-
-.. c:type:: v4l2_enum_dv_timings
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_enum_dv_timings
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - Number of the DV timings, set by the application.
-    * - __u32
-      - ``pad``
-      - Pad number as reported by the media controller API. This field is
-	only used when operating on a subdevice node. When operating on a
-	video node applications must set this field to zero.
-    * - __u32
-      - ``reserved``\ [2]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-    * - struct :c:type:`v4l2_dv_timings`
-      - ``timings``
-      - The timings.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_enum_dv_timings`
-    ``index`` is out of bounds or the ``pad`` number is invalid.
-
-ENODATA
-    Digital video presets are not supported for this input or output.
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst
deleted file mode 100644
index 8ca6ab701e4a..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst
+++ /dev/null
@@ -1,159 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUM_FMT:
-
-*********************
-ioctl VIDIOC_ENUM_FMT
-*********************
-
-Name
-====
-
-VIDIOC_ENUM_FMT - Enumerate image formats
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FMT, struct v4l2_fmtdesc *argp )
-    :name: VIDIOC_ENUM_FMT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_fmtdesc`.
-
-
-Description
-===========
-
-To enumerate image formats applications initialize the ``type`` and
-``index`` field of struct :c:type:`v4l2_fmtdesc` and call
-the :ref:`VIDIOC_ENUM_FMT` ioctl with a pointer to this structure. Drivers
-fill the rest of the structure or return an ``EINVAL`` error code. All
-formats are enumerable by beginning at index zero and incrementing by
-one until ``EINVAL`` is returned. If applicable, drivers shall return
-formats in preference order, where preferred formats are returned before
-(that is, with lower ``index`` value) less-preferred formats.
-
-.. note::
-
-   After switching input or output the list of enumerated image
-   formats may be different.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_fmtdesc
-
-.. flat-table:: struct v4l2_fmtdesc
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - Number of the format in the enumeration, set by the application.
-	This is in no way related to the ``pixelformat`` field.
-    * - __u32
-      - ``type``
-      - Type of the data stream, set by the application. Only these types
-	are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``,
-	``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
-	``V4L2_BUF_TYPE_VIDEO_OUTPUT``,
-	``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``,
-	``V4L2_BUF_TYPE_VIDEO_OVERLAY``,
-	``V4L2_BUF_TYPE_SDR_CAPTURE``,
-	``V4L2_BUF_TYPE_SDR_OUTPUT`` and
-	``V4L2_BUF_TYPE_META_CAPTURE``.
-	See :c:type:`v4l2_buf_type`.
-    * - __u32
-      - ``flags``
-      - See :ref:`fmtdesc-flags`
-    * - __u8
-      - ``description``\ [32]
-      - Description of the format, a NUL-terminated ASCII string. This
-	information is intended for the user, for example: "YUV 4:2:2".
-    * - __u32
-      - ``pixelformat``
-      - The image format identifier. This is a four character code as
-	computed by the v4l2_fourcc() macro:
-    * - :cspan:`2`
-
-	.. _v4l2-fourcc:
-
-	``#define v4l2_fourcc(a,b,c,d)``
-
-	``(((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))``
-
-	Several image formats are already defined by this specification in
-	:ref:`pixfmt`.
-
-	.. attention::
-
-	   These codes are not the same as those used
-	   in the Windows world.
-    * - __u32
-      - ``reserved``\ [4]
-      - Reserved for future extensions. Drivers must set the array to
-	zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _fmtdesc-flags:
-
-.. flat-table:: Image Format Description Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_FMT_FLAG_COMPRESSED``
-      - 0x0001
-      - This is a compressed format.
-    * - ``V4L2_FMT_FLAG_EMULATED``
-      - 0x0002
-      - This format is not native to the device but emulated through
-	software (usually libv4l2), where possible try to use a native
-	format instead for better performance.
-    * - ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
-      - 0x0004
-      - The hardware decoder for this compressed bytestream format (aka coded
-	format) is capable of parsing a continuous bytestream. Applications do
-	not need to parse the bytestream themselves to find the boundaries
-	between frames/fields. This flag can only be used in combination with
-	the ``V4L2_FMT_FLAG_COMPRESSED`` flag, since this applies to compressed
-	formats only. This flag is valid for stateful decoders only.
-    * - ``V4L2_FMT_FLAG_DYN_RESOLUTION``
-      - 0x0008
-      - Dynamic resolution switching is supported by the device for this
-	compressed bytestream format (aka coded format). It will notify the user
-	via the event ``V4L2_EVENT_SOURCE_CHANGE`` when changes in the video
-	parameters are detected. This flag can only be used in combination
-	with the ``V4L2_FMT_FLAG_COMPRESSED`` flag, since this applies to
-	compressed formats only. It is also only applies to stateful codecs.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_fmtdesc` ``type`` is not
-    supported or the ``index`` is out of bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst b/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst
deleted file mode 100644
index 563a67cddeca..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst
+++ /dev/null
@@ -1,203 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUM_FRAMEINTERVALS:
-
-********************************
-ioctl VIDIOC_ENUM_FRAMEINTERVALS
-********************************
-
-Name
-====
-
-VIDIOC_ENUM_FRAMEINTERVALS - Enumerate frame intervals
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FRAMEINTERVALS, struct v4l2_frmivalenum *argp )
-    :name: VIDIOC_ENUM_FRAMEINTERVALS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_frmivalenum`
-    that contains a pixel format and size and receives a frame interval.
-
-
-Description
-===========
-
-This ioctl allows applications to enumerate all frame intervals that the
-device supports for the given pixel format and frame size.
-
-The supported pixel formats and frame sizes can be obtained by using the
-:ref:`VIDIOC_ENUM_FMT` and
-:ref:`VIDIOC_ENUM_FRAMESIZES` functions.
-
-The return value and the content of the ``v4l2_frmivalenum.type`` field
-depend on the type of frame intervals the device supports. Here are the
-semantics of the function for the different cases:
-
--  **Discrete:** The function returns success if the given index value
-   (zero-based) is valid. The application should increase the index by
-   one for each call until ``EINVAL`` is returned. The
-   `v4l2_frmivalenum.type` field is set to
-   `V4L2_FRMIVAL_TYPE_DISCRETE` by the driver. Of the union only
-   the `discrete` member is valid.
-
--  **Step-wise:** The function returns success if the given index value
-   is zero and ``EINVAL`` for any other index value. The
-   ``v4l2_frmivalenum.type`` field is set to
-   ``V4L2_FRMIVAL_TYPE_STEPWISE`` by the driver. Of the union only the
-   ``stepwise`` member is valid.
-
--  **Continuous:** This is a special case of the step-wise type above.
-   The function returns success if the given index value is zero and
-   ``EINVAL`` for any other index value. The ``v4l2_frmivalenum.type``
-   field is set to ``V4L2_FRMIVAL_TYPE_CONTINUOUS`` by the driver. Of
-   the union only the ``stepwise`` member is valid and the ``step``
-   value is set to 1.
-
-When the application calls the function with index zero, it must check
-the ``type`` field to determine the type of frame interval enumeration
-the device supports. Only for the ``V4L2_FRMIVAL_TYPE_DISCRETE`` type
-does it make sense to increase the index value to receive more frame
-intervals.
-
-.. note::
-
-   The order in which the frame intervals are returned has no
-   special meaning. In particular does it not say anything about potential
-   default frame intervals.
-
-Applications can assume that the enumeration data does not change
-without any interaction from the application itself. This means that the
-enumeration data is consistent if the application does not perform any
-other ioctl calls while it runs the frame interval enumeration.
-
-.. note::
-
-   **Frame intervals and frame rates:** The V4L2 API uses frame
-   intervals instead of frame rates. Given the frame interval the frame
-   rate can be computed as follows:
-
-   ::
-
-       frame_rate = 1 / frame_interval
-
-
-Structs
-=======
-
-In the structs below, *IN* denotes a value that has to be filled in by
-the application, *OUT* denotes values that the driver fills in. The
-application should zero out all members except for the *IN* fields.
-
-
-.. c:type:: v4l2_frmival_stepwise
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_frmival_stepwise
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - struct :c:type:`v4l2_fract`
-      - ``min``
-      - Minimum frame interval [s].
-    * - struct :c:type:`v4l2_fract`
-      - ``max``
-      - Maximum frame interval [s].
-    * - struct :c:type:`v4l2_fract`
-      - ``step``
-      - Frame interval step size [s].
-
-
-
-.. c:type:: v4l2_frmivalenum
-
-.. tabularcolumns:: |p{1.8cm}|p{4.4cm}|p{2.4cm}|p{8.9cm}|
-
-.. flat-table:: struct v4l2_frmivalenum
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - __u32
-      - ``index``
-      - IN: Index of the given frame interval in the enumeration.
-    * - __u32
-      - ``pixel_format``
-      - IN: Pixel format for which the frame intervals are enumerated.
-    * - __u32
-      - ``width``
-      - IN: Frame width for which the frame intervals are enumerated.
-    * - __u32
-      - ``height``
-      - IN: Frame height for which the frame intervals are enumerated.
-    * - __u32
-      - ``type``
-      - OUT: Frame interval type the device supports.
-    * - union {
-      - (anonymous)
-      - OUT: Frame interval with the given index.
-    * - struct :c:type:`v4l2_fract`
-      - ``discrete``
-      - Frame interval [s].
-    * - struct :c:type:`v4l2_frmival_stepwise`
-      - ``stepwise``
-      -
-    * - }
-      -
-      -
-    * - __u32
-      - ``reserved[2]``
-      -
-      - Reserved space for future use. Must be zeroed by drivers and
-	applications.
-
-
-
-Enums
-=====
-
-
-.. c:type:: v4l2_frmivaltypes
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. flat-table:: enum v4l2_frmivaltypes
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_FRMIVAL_TYPE_DISCRETE``
-      - 1
-      - Discrete frame interval.
-    * - ``V4L2_FRMIVAL_TYPE_CONTINUOUS``
-      - 2
-      - Continuous frame interval.
-    * - ``V4L2_FRMIVAL_TYPE_STEPWISE``
-      - 3
-      - Step-wise defined frame interval.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst b/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst
deleted file mode 100644
index cd97546a7122..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst
+++ /dev/null
@@ -1,213 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUM_FRAMESIZES:
-
-****************************
-ioctl VIDIOC_ENUM_FRAMESIZES
-****************************
-
-Name
-====
-
-VIDIOC_ENUM_FRAMESIZES - Enumerate frame sizes
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FRAMESIZES, struct v4l2_frmsizeenum *argp )
-    :name: VIDIOC_ENUM_FRAMESIZES
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_frmsizeenum`
-    that contains an index and pixel format and receives a frame width
-    and height.
-
-
-Description
-===========
-
-This ioctl allows applications to enumerate all frame sizes (i. e. width
-and height in pixels) that the device supports for the given pixel
-format.
-
-The supported pixel formats can be obtained by using the
-:ref:`VIDIOC_ENUM_FMT` function.
-
-The return value and the content of the ``v4l2_frmsizeenum.type`` field
-depend on the type of frame sizes the device supports. Here are the
-semantics of the function for the different cases:
-
--  **Discrete:** The function returns success if the given index value
-   (zero-based) is valid. The application should increase the index by
-   one for each call until ``EINVAL`` is returned. The
-   ``v4l2_frmsizeenum.type`` field is set to
-   ``V4L2_FRMSIZE_TYPE_DISCRETE`` by the driver. Of the union only the
-   ``discrete`` member is valid.
-
--  **Step-wise:** The function returns success if the given index value
-   is zero and ``EINVAL`` for any other index value. The
-   ``v4l2_frmsizeenum.type`` field is set to
-   ``V4L2_FRMSIZE_TYPE_STEPWISE`` by the driver. Of the union only the
-   ``stepwise`` member is valid.
-
--  **Continuous:** This is a special case of the step-wise type above.
-   The function returns success if the given index value is zero and
-   ``EINVAL`` for any other index value. The ``v4l2_frmsizeenum.type``
-   field is set to ``V4L2_FRMSIZE_TYPE_CONTINUOUS`` by the driver. Of
-   the union only the ``stepwise`` member is valid and the
-   ``step_width`` and ``step_height`` values are set to 1.
-
-When the application calls the function with index zero, it must check
-the ``type`` field to determine the type of frame size enumeration the
-device supports. Only for the ``V4L2_FRMSIZE_TYPE_DISCRETE`` type does
-it make sense to increase the index value to receive more frame sizes.
-
-.. note::
-
-   The order in which the frame sizes are returned has no special
-   meaning. In particular does it not say anything about potential default
-   format sizes.
-
-Applications can assume that the enumeration data does not change
-without any interaction from the application itself. This means that the
-enumeration data is consistent if the application does not perform any
-other ioctl calls while it runs the frame size enumeration.
-
-
-Structs
-=======
-
-In the structs below, *IN* denotes a value that has to be filled in by
-the application, *OUT* denotes values that the driver fills in. The
-application should zero out all members except for the *IN* fields.
-
-
-.. c:type:: v4l2_frmsize_discrete
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_frmsize_discrete
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``width``
-      - Width of the frame [pixel].
-    * - __u32
-      - ``height``
-      - Height of the frame [pixel].
-
-
-
-.. c:type:: v4l2_frmsize_stepwise
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_frmsize_stepwise
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``min_width``
-      - Minimum frame width [pixel].
-    * - __u32
-      - ``max_width``
-      - Maximum frame width [pixel].
-    * - __u32
-      - ``step_width``
-      - Frame width step size [pixel].
-    * - __u32
-      - ``min_height``
-      - Minimum frame height [pixel].
-    * - __u32
-      - ``max_height``
-      - Maximum frame height [pixel].
-    * - __u32
-      - ``step_height``
-      - Frame height step size [pixel].
-
-
-
-.. c:type:: v4l2_frmsizeenum
-
-.. tabularcolumns:: |p{1.4cm}|p{5.9cm}|p{2.3cm}|p{8.0cm}|
-
-.. flat-table:: struct v4l2_frmsizeenum
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - __u32
-      - ``index``
-      - IN: Index of the given frame size in the enumeration.
-    * - __u32
-      - ``pixel_format``
-      - IN: Pixel format for which the frame sizes are enumerated.
-    * - __u32
-      - ``type``
-      - OUT: Frame size type the device supports.
-    * - union {
-      - (anonymous)
-      - OUT: Frame size with the given index.
-    * - struct :c:type:`v4l2_frmsize_discrete`
-      - ``discrete``
-      -
-    * - struct :c:type:`v4l2_frmsize_stepwise`
-      - ``stepwise``
-      -
-    * - }
-      -
-      -
-    * - __u32
-      - ``reserved[2]``
-      - Reserved space for future use. Must be zeroed by drivers and
-	applications.
-
-
-
-Enums
-=====
-
-
-.. c:type:: v4l2_frmsizetypes
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. flat-table:: enum v4l2_frmsizetypes
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_FRMSIZE_TYPE_DISCRETE``
-      - 1
-      - Discrete frame size.
-    * - ``V4L2_FRMSIZE_TYPE_CONTINUOUS``
-      - 2
-      - Continuous frame size.
-    * - ``V4L2_FRMSIZE_TYPE_STEPWISE``
-      - 3
-      - Step-wise defined frame size.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst b/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst
deleted file mode 100644
index 0e97c09afe0e..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst
+++ /dev/null
@@ -1,150 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUM_FREQ_BANDS:
-
-****************************
-ioctl VIDIOC_ENUM_FREQ_BANDS
-****************************
-
-Name
-====
-
-VIDIOC_ENUM_FREQ_BANDS - Enumerate supported frequency bands
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FREQ_BANDS, struct v4l2_frequency_band *argp )
-    :name: VIDIOC_ENUM_FREQ_BANDS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_frequency_band`.
-
-
-Description
-===========
-
-Enumerates the frequency bands that a tuner or modulator supports. To do
-this applications initialize the ``tuner``, ``type`` and ``index``
-fields, and zero out the ``reserved`` array of a struct
-:c:type:`v4l2_frequency_band` and call the
-:ref:`VIDIOC_ENUM_FREQ_BANDS` ioctl with a pointer to this structure.
-
-This ioctl is supported if the ``V4L2_TUNER_CAP_FREQ_BANDS`` capability
-of the corresponding tuner/modulator is set.
-
-
-.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}|
-
-.. c:type:: v4l2_frequency_band
-
-.. flat-table:: struct v4l2_frequency_band
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2 1 1
-
-    * - __u32
-      - ``tuner``
-      - The tuner or modulator index number. This is the same value as in
-	the struct :c:type:`v4l2_input` ``tuner`` field and
-	the struct :c:type:`v4l2_tuner` ``index`` field, or
-	the struct :c:type:`v4l2_output` ``modulator`` field
-	and the struct :c:type:`v4l2_modulator` ``index``
-	field.
-    * - __u32
-      - ``type``
-      - The tuner type. This is the same value as in the struct
-	:c:type:`v4l2_tuner` ``type`` field. The type must be
-	set to ``V4L2_TUNER_RADIO`` for ``/dev/radioX`` device nodes, and
-	to ``V4L2_TUNER_ANALOG_TV`` for all others. Set this field to
-	``V4L2_TUNER_RADIO`` for modulators (currently only radio
-	modulators are supported). See :c:type:`v4l2_tuner_type`
-    * - __u32
-      - ``index``
-      - Identifies the frequency band, set by the application.
-    * - __u32
-      - ``capability``
-      - :cspan:`2` The tuner/modulator capability flags for this
-	frequency band, see :ref:`tuner-capability`. The
-	``V4L2_TUNER_CAP_LOW`` or ``V4L2_TUNER_CAP_1HZ`` capability must
-	be the same for all frequency bands of the selected
-	tuner/modulator. So either all bands have that capability set, or
-	none of them have that capability.
-    * - __u32
-      - ``rangelow``
-      - :cspan:`2` The lowest tunable frequency in units of 62.5 kHz, or
-	if the ``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units
-	of 62.5 Hz, for this frequency band. A 1 Hz unit is used when the
-	``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is set.
-    * - __u32
-      - ``rangehigh``
-      - :cspan:`2` The highest tunable frequency in units of 62.5 kHz,
-	or if the ``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in
-	units of 62.5 Hz, for this frequency band. A 1 Hz unit is used
-	when the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is set.
-    * - __u32
-      - ``modulation``
-      - :cspan:`2` The supported modulation systems of this frequency
-	band. See :ref:`band-modulation`.
-
-	.. note::
-
-	   Currently only one modulation system per frequency band
-	   is supported. More work will need to be done if multiple
-	   modulation systems are possible. Contact the linux-media
-	   mailing list
-	   (`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__)
-	   if you need such functionality.
-    * - __u32
-      - ``reserved``\ [9]
-      - Reserved for future extensions.
-
-	Applications and drivers must set the array to zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _band-modulation:
-
-.. flat-table:: Band Modulation Systems
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_BAND_MODULATION_VSB``
-      - 0x02
-      - Vestigial Sideband modulation, used for analog TV.
-    * - ``V4L2_BAND_MODULATION_FM``
-      - 0x04
-      - Frequency Modulation, commonly used for analog radio.
-    * - ``V4L2_BAND_MODULATION_AM``
-      - 0x08
-      - Amplitude Modulation, commonly used for analog radio.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The ``tuner`` or ``index`` is out of bounds or the ``type`` field is
-    wrong.
diff --git a/Documentation/media/uapi/v4l/vidioc-enumaudio.rst b/Documentation/media/uapi/v4l/vidioc-enumaudio.rst
deleted file mode 100644
index ee0c336c8721..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enumaudio.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUMAUDIO:
-
-**********************
-ioctl VIDIOC_ENUMAUDIO
-**********************
-
-Name
-====
-
-VIDIOC_ENUMAUDIO - Enumerate audio inputs
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUMAUDIO, struct v4l2_audio *argp )
-    :name: VIDIOC_ENUMAUDIO
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_audio`.
-
-
-Description
-===========
-
-To query the attributes of an audio input applications initialize the
-``index`` field and zero out the ``reserved`` array of a struct
-:c:type:`v4l2_audio` and call the :ref:`VIDIOC_ENUMAUDIO`
-ioctl with a pointer to this structure. Drivers fill the rest of the
-structure or return an ``EINVAL`` error code when the index is out of
-bounds. To enumerate all audio inputs applications shall begin at index
-zero, incrementing by one until the driver returns ``EINVAL``.
-
-See :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` for a description of struct
-:c:type:`v4l2_audio`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The number of the audio input is out of bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst b/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst
deleted file mode 100644
index 3a8882214d62..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst
+++ /dev/null
@@ -1,67 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUMAUDOUT:
-
-***********************
-ioctl VIDIOC_ENUMAUDOUT
-***********************
-
-Name
-====
-
-VIDIOC_ENUMAUDOUT - Enumerate audio outputs
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUMAUDOUT, struct v4l2_audioout *argp )
-    :name: VIDIOC_ENUMAUDOUT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_audioout`.
-
-
-Description
-===========
-
-To query the attributes of an audio output applications initialize the
-``index`` field and zero out the ``reserved`` array of a struct
-:c:type:`v4l2_audioout` and call the ``VIDIOC_G_AUDOUT``
-ioctl with a pointer to this structure. Drivers fill the rest of the
-structure or return an ``EINVAL`` error code when the index is out of
-bounds. To enumerate all audio outputs applications shall begin at index
-zero, incrementing by one until the driver returns ``EINVAL``.
-
-.. note::
-
-    Connectors on a TV card to loop back the received audio signal
-    to a sound card are not audio outputs in this sense.
-
-See :ref:`VIDIOC_G_AUDIOout <VIDIOC_G_AUDOUT>` for a description of struct
-:c:type:`v4l2_audioout`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The number of the audio output is out of bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-enuminput.rst b/Documentation/media/uapi/v4l/vidioc-enuminput.rst
deleted file mode 100644
index a0e4c4413121..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enuminput.rst
+++ /dev/null
@@ -1,242 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUMINPUT:
-
-**********************
-ioctl VIDIOC_ENUMINPUT
-**********************
-
-Name
-====
-
-VIDIOC_ENUMINPUT - Enumerate video inputs
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUMINPUT, struct v4l2_input *argp )
-    :name: VIDIOC_ENUMINPUT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_input`.
-
-
-Description
-===========
-
-To query the attributes of a video input applications initialize the
-``index`` field of struct :c:type:`v4l2_input` and call the
-:ref:`VIDIOC_ENUMINPUT` with a pointer to this structure. Drivers
-fill the rest of the structure or return an ``EINVAL`` error code when the
-index is out of bounds. To enumerate all inputs applications shall begin
-at index zero, incrementing by one until the driver returns ``EINVAL``.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_input
-
-.. flat-table:: struct v4l2_input
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - Identifies the input, set by the application.
-    * - __u8
-      - ``name``\ [32]
-      - Name of the video input, a NUL-terminated ASCII string, for
-	example: "Vin (Composite 2)". This information is intended for the
-	user, preferably the connector label on the device itself.
-    * - __u32
-      - ``type``
-      - Type of the input, see :ref:`input-type`.
-    * - __u32
-      - ``audioset``
-      - Drivers can enumerate up to 32 video and audio inputs. This field
-	shows which audio inputs were selectable as audio source if this
-	was the currently selected video input. It is a bit mask. The LSB
-	corresponds to audio input 0, the MSB to input 31. Any number of
-	bits can be set, or none.
-
-	When the driver does not enumerate audio inputs no bits must be
-	set. Applications shall not interpret this as lack of audio
-	support. Some drivers automatically select audio sources and do
-	not enumerate them since there is no choice anyway.
-
-	For details on audio inputs and how to select the current input
-	see :ref:`audio`.
-    * - __u32
-      - ``tuner``
-      - Capture devices can have zero or more tuners (RF demodulators).
-	When the ``type`` is set to ``V4L2_INPUT_TYPE_TUNER`` this is an
-	RF connector and this field identifies the tuner. It corresponds
-	to struct :c:type:`v4l2_tuner` field ``index``. For
-	details on tuners see :ref:`tuner`.
-    * - :ref:`v4l2_std_id <v4l2-std-id>`
-      - ``std``
-      - Every video input supports one or more different video standards.
-	This field is a set of all supported standards. For details on
-	video standards and how to switch see :ref:`standard`.
-    * - __u32
-      - ``status``
-      - This field provides status information about the input. See
-	:ref:`input-status` for flags. With the exception of the sensor
-	orientation bits ``status`` is only valid when this is the current
-	input.
-    * - __u32
-      - ``capabilities``
-      - This field provides capabilities for the input. See
-	:ref:`input-capabilities` for flags.
-    * - __u32
-      - ``reserved``\ [3]
-      - Reserved for future extensions. Drivers must set the array to
-	zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _input-type:
-
-.. flat-table:: Input Types
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_INPUT_TYPE_TUNER``
-      - 1
-      - This input uses a tuner (RF demodulator).
-    * - ``V4L2_INPUT_TYPE_CAMERA``
-      - 2
-      - Any non-tuner video input, for example Composite Video,
-	S-Video, HDMI, camera sensor. The naming as ``_TYPE_CAMERA`` is historical,
-	today we would have called it ``_TYPE_VIDEO``.
-    * - ``V4L2_INPUT_TYPE_TOUCH``
-      - 3
-      - This input is a touch device for capturing raw touch data.
-
-
-
-.. tabularcolumns:: |p{4.8cm}|p{2.6cm}|p{10.1cm}|
-
-.. _input-status:
-
-.. flat-table:: Input Status Flags
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - :cspan:`2` General
-    * - ``V4L2_IN_ST_NO_POWER``
-      - 0x00000001
-      - Attached device is off.
-    * - ``V4L2_IN_ST_NO_SIGNAL``
-      - 0x00000002
-      -
-    * - ``V4L2_IN_ST_NO_COLOR``
-      - 0x00000004
-      - The hardware supports color decoding, but does not detect color
-	modulation in the signal.
-    * - :cspan:`2` Sensor Orientation
-    * - ``V4L2_IN_ST_HFLIP``
-      - 0x00000010
-      - The input is connected to a device that produces a signal that is
-	flipped horizontally and does not correct this before passing the
-	signal to userspace.
-    * - ``V4L2_IN_ST_VFLIP``
-      - 0x00000020
-      - The input is connected to a device that produces a signal that is
-	flipped vertically and does not correct this before passing the
-	signal to userspace.
-	.. note:: A 180 degree rotation is the same as HFLIP | VFLIP
-    * - :cspan:`2` Analog Video
-    * - ``V4L2_IN_ST_NO_H_LOCK``
-      - 0x00000100
-      - No horizontal sync lock.
-    * - ``V4L2_IN_ST_COLOR_KILL``
-      - 0x00000200
-      - A color killer circuit automatically disables color decoding when
-	it detects no color modulation. When this flag is set the color
-	killer is enabled *and* has shut off color decoding.
-    * - ``V4L2_IN_ST_NO_V_LOCK``
-      - 0x00000400
-      - No vertical sync lock.
-    * - ``V4L2_IN_ST_NO_STD_LOCK``
-      - 0x00000800
-      - No standard format lock in case of auto-detection format
-	by the component.
-    * - :cspan:`2` Digital Video
-    * - ``V4L2_IN_ST_NO_SYNC``
-      - 0x00010000
-      - No synchronization lock.
-    * - ``V4L2_IN_ST_NO_EQU``
-      - 0x00020000
-      - No equalizer lock.
-    * - ``V4L2_IN_ST_NO_CARRIER``
-      - 0x00040000
-      - Carrier recovery failed.
-    * - :cspan:`2` VCR and Set-Top Box
-    * - ``V4L2_IN_ST_MACROVISION``
-      - 0x01000000
-      - Macrovision is an analog copy prevention system mangling the video
-	signal to confuse video recorders. When this flag is set
-	Macrovision has been detected.
-    * - ``V4L2_IN_ST_NO_ACCESS``
-      - 0x02000000
-      - Conditional access denied.
-    * - ``V4L2_IN_ST_VTR``
-      - 0x04000000
-      - VTR time constant. [?]
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _input-capabilities:
-
-.. flat-table:: Input capabilities
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_IN_CAP_DV_TIMINGS``
-      - 0x00000002
-      - This input supports setting video timings by using
-	``VIDIOC_S_DV_TIMINGS``.
-    * - ``V4L2_IN_CAP_STD``
-      - 0x00000004
-      - This input supports setting the TV standard by using
-	``VIDIOC_S_STD``.
-    * - ``V4L2_IN_CAP_NATIVE_SIZE``
-      - 0x00000008
-      - This input supports setting the native size using the
-	``V4L2_SEL_TGT_NATIVE_SIZE`` selection target, see
-	:ref:`v4l2-selections-common`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_input` ``index`` is out of
-    bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst b/Documentation/media/uapi/v4l/vidioc-enumoutput.rst
deleted file mode 100644
index 0fea81f60541..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUMOUTPUT:
-
-***********************
-ioctl VIDIOC_ENUMOUTPUT
-***********************
-
-Name
-====
-
-VIDIOC_ENUMOUTPUT - Enumerate video outputs
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUMOUTPUT, struct v4l2_output *argp )
-    :name: VIDIOC_ENUMOUTPUT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_output`.
-
-
-Description
-===========
-
-To query the attributes of a video outputs applications initialize the
-``index`` field of struct :c:type:`v4l2_output` and call
-the :ref:`VIDIOC_ENUMOUTPUT` with a pointer to this structure.
-Drivers fill the rest of the structure or return an ``EINVAL`` error code
-when the index is out of bounds. To enumerate all outputs applications
-shall begin at index zero, incrementing by one until the driver returns
-``EINVAL``.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_output
-
-.. flat-table:: struct v4l2_output
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - Identifies the output, set by the application.
-    * - __u8
-      - ``name``\ [32]
-      - Name of the video output, a NUL-terminated ASCII string, for
-	example: "Vout". This information is intended for the user,
-	preferably the connector label on the device itself.
-    * - __u32
-      - ``type``
-      - Type of the output, see :ref:`output-type`.
-    * - __u32
-      - ``audioset``
-      - Drivers can enumerate up to 32 video and audio outputs. This field
-	shows which audio outputs were selectable as the current output if
-	this was the currently selected video output. It is a bit mask.
-	The LSB corresponds to audio output 0, the MSB to output 31. Any
-	number of bits can be set, or none.
-
-	When the driver does not enumerate audio outputs no bits must be
-	set. Applications shall not interpret this as lack of audio
-	support. Drivers may automatically select audio outputs without
-	enumerating them.
-
-	For details on audio outputs and how to select the current output
-	see :ref:`audio`.
-    * - __u32
-      - ``modulator``
-      - Output devices can have zero or more RF modulators. When the
-	``type`` is ``V4L2_OUTPUT_TYPE_MODULATOR`` this is an RF connector
-	and this field identifies the modulator. It corresponds to struct
-	:c:type:`v4l2_modulator` field ``index``. For
-	details on modulators see :ref:`tuner`.
-    * - :ref:`v4l2_std_id <v4l2-std-id>`
-      - ``std``
-      - Every video output supports one or more different video standards.
-	This field is a set of all supported standards. For details on
-	video standards and how to switch see :ref:`standard`.
-    * - __u32
-      - ``capabilities``
-      - This field provides capabilities for the output. See
-	:ref:`output-capabilities` for flags.
-    * - __u32
-      - ``reserved``\ [3]
-      - Reserved for future extensions. Drivers must set the array to
-	zero.
-
-
-
-.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}|
-
-.. _output-type:
-
-.. flat-table:: Output Type
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_OUTPUT_TYPE_MODULATOR``
-      - 1
-      - This output is an analog TV modulator.
-    * - ``V4L2_OUTPUT_TYPE_ANALOG``
-      - 2
-      - Any non-modulator video output, for example Composite Video,
-	S-Video, HDMI. The naming as ``_TYPE_ANALOG`` is historical,
-	today we would have called it ``_TYPE_VIDEO``.
-    * - ``V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY``
-      - 3
-      - The video output will be copied to a :ref:`video overlay <overlay>`.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _output-capabilities:
-
-.. flat-table:: Output capabilities
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_OUT_CAP_DV_TIMINGS``
-      - 0x00000002
-      - This output supports setting video timings by using
-	``VIDIOC_S_DV_TIMINGS``.
-    * - ``V4L2_OUT_CAP_STD``
-      - 0x00000004
-      - This output supports setting the TV standard by using
-	``VIDIOC_S_STD``.
-    * - ``V4L2_OUT_CAP_NATIVE_SIZE``
-      - 0x00000008
-      - This output supports setting the native size using the
-	``V4L2_SEL_TGT_NATIVE_SIZE`` selection target, see
-	:ref:`v4l2-selections-common`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_output` ``index`` is out of
-    bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-enumstd.rst b/Documentation/media/uapi/v4l/vidioc-enumstd.rst
deleted file mode 100644
index 1603b1b3b6e8..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-enumstd.rst
+++ /dev/null
@@ -1,367 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_ENUMSTD:
-
-*******************************************
-ioctl VIDIOC_ENUMSTD, VIDIOC_SUBDEV_ENUMSTD
-*******************************************
-
-Name
-====
-
-VIDIOC_ENUMSTD - VIDIOC_SUBDEV_ENUMSTD - Enumerate supported video standards
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_ENUMSTD, struct v4l2_standard *argp )
-    :name: VIDIOC_ENUMSTD
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUMSTD, struct v4l2_standard *argp )
-    :name: VIDIOC_SUBDEV_ENUMSTD
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_standard`.
-
-
-Description
-===========
-
-To query the attributes of a video standard, especially a custom (driver
-defined) one, applications initialize the ``index`` field of struct
-:c:type:`v4l2_standard` and call the :ref:`VIDIOC_ENUMSTD`
-ioctl with a pointer to this structure. Drivers fill the rest of the
-structure or return an ``EINVAL`` error code when the index is out of
-bounds. To enumerate all standards applications shall begin at index
-zero, incrementing by one until the driver returns ``EINVAL``. Drivers may
-enumerate a different set of standards after switching the video input
-or output. [#f1]_
-
-
-.. c:type:: v4l2_standard
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_standard
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - Number of the video standard, set by the application.
-    * - :ref:`v4l2_std_id <v4l2-std-id>`
-      - ``id``
-      - The bits in this field identify the standard as one of the common
-	standards listed in :ref:`v4l2-std-id`, or if bits 32 to 63 are
-	set as custom standards. Multiple bits can be set if the hardware
-	does not distinguish between these standards, however separate
-	indices do not indicate the opposite. The ``id`` must be unique.
-	No other enumerated struct :c:type:`v4l2_standard` structure,
-	for this input or output anyway, can contain the same set of bits.
-    * - __u8
-      - ``name``\ [24]
-      - Name of the standard, a NUL-terminated ASCII string, for example:
-	"PAL-B/G", "NTSC Japan". This information is intended for the
-	user.
-    * - struct :c:type:`v4l2_fract`
-      - ``frameperiod``
-      - The frame period (not field period) is numerator / denominator.
-	For example M/NTSC has a frame period of 1001 / 30000 seconds.
-    * - __u32
-      - ``framelines``
-      - Total lines per frame including blanking, e. g. 625 for B/PAL.
-    * - __u32
-      - ``reserved``\ [4]
-      - Reserved for future extensions. Drivers must set the array to
-	zero.
-
-
-
-.. c:type:: v4l2_fract
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_fract
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``numerator``
-      -
-    * - __u32
-      - ``denominator``
-      -
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. _v4l2-std-id:
-
-.. flat-table:: typedef v4l2_std_id
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u64
-      - ``v4l2_std_id``
-      - This type is a set, each bit representing another video standard
-	as listed below and in :ref:`video-standards`. The 32 most
-	significant bits are reserved for custom (driver defined) video
-	standards.
-
-
-
-.. code-block:: c
-
-    #define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
-    #define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
-    #define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
-    #define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
-    #define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
-    #define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
-    #define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
-    #define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
-
-    #define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
-    #define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
-    #define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
-    #define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
-
-``V4L2_STD_PAL_60`` is a hybrid standard with 525 lines, 60 Hz refresh
-rate, and PAL color modulation with a 4.43 MHz color subcarrier. Some
-PAL video recorders can play back NTSC tapes in this mode for display on
-a 50/60 Hz agnostic PAL TV.
-
-
-.. code-block:: c
-
-    #define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)
-    #define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)
-    #define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
-
-``V4L2_STD_NTSC_443`` is a hybrid standard with 525 lines, 60 Hz refresh
-rate, and NTSC color modulation with a 4.43 MHz color subcarrier.
-
-
-.. code-block:: c
-
-    #define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)
-
-    #define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
-    #define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
-    #define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
-    #define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
-    #define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
-    #define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
-    #define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
-    #define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
-
-    /* ATSC/HDTV */
-    #define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
-    #define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
-
-``V4L2_STD_ATSC_8_VSB`` and ``V4L2_STD_ATSC_16_VSB`` are U.S.
-terrestrial digital TV standards. Presently the V4L2 API does not
-support digital TV. See also the Linux DVB API at
-`https://linuxtv.org <https://linuxtv.org>`__.
-
-
-.. code-block:: c
-
-    #define V4L2_STD_PAL_BG         (V4L2_STD_PAL_B         |
-		     V4L2_STD_PAL_B1        |
-		     V4L2_STD_PAL_G)
-    #define V4L2_STD_B              (V4L2_STD_PAL_B         |
-		     V4L2_STD_PAL_B1        |
-		     V4L2_STD_SECAM_B)
-    #define V4L2_STD_GH             (V4L2_STD_PAL_G         |
-		     V4L2_STD_PAL_H         |
-		     V4L2_STD_SECAM_G       |
-		     V4L2_STD_SECAM_H)
-    #define V4L2_STD_PAL_DK         (V4L2_STD_PAL_D         |
-		     V4L2_STD_PAL_D1        |
-		     V4L2_STD_PAL_K)
-    #define V4L2_STD_PAL            (V4L2_STD_PAL_BG        |
-		     V4L2_STD_PAL_DK        |
-		     V4L2_STD_PAL_H         |
-		     V4L2_STD_PAL_I)
-    #define V4L2_STD_NTSC           (V4L2_STD_NTSC_M        |
-		     V4L2_STD_NTSC_M_JP     |
-		     V4L2_STD_NTSC_M_KR)
-    #define V4L2_STD_MN             (V4L2_STD_PAL_M         |
-		     V4L2_STD_PAL_N         |
-		     V4L2_STD_PAL_Nc        |
-		     V4L2_STD_NTSC)
-    #define V4L2_STD_SECAM_DK       (V4L2_STD_SECAM_D       |
-		     V4L2_STD_SECAM_K       |
-		     V4L2_STD_SECAM_K1)
-    #define V4L2_STD_DK             (V4L2_STD_PAL_DK        |
-		     V4L2_STD_SECAM_DK)
-
-    #define V4L2_STD_SECAM          (V4L2_STD_SECAM_B       |
-		     V4L2_STD_SECAM_G       |
-		     V4L2_STD_SECAM_H       |
-		     V4L2_STD_SECAM_DK      |
-		     V4L2_STD_SECAM_L       |
-		     V4L2_STD_SECAM_LC)
-
-    #define V4L2_STD_525_60         (V4L2_STD_PAL_M         |
-		     V4L2_STD_PAL_60        |
-		     V4L2_STD_NTSC          |
-		     V4L2_STD_NTSC_443)
-    #define V4L2_STD_625_50         (V4L2_STD_PAL           |
-		     V4L2_STD_PAL_N         |
-		     V4L2_STD_PAL_Nc        |
-		     V4L2_STD_SECAM)
-
-    #define V4L2_STD_UNKNOWN        0
-    #define V4L2_STD_ALL            (V4L2_STD_525_60        |
-		     V4L2_STD_625_50)
-
-
-.. raw:: latex
-
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-..                            NTSC/M   PAL/M    /N       /B       /D       /H       /I        SECAM/B    /D       /K1     /L
-.. tabularcolumns:: |p{1.43cm}|p{1.38cm}|p{1.59cm}|p{1.7cm}|p{1.7cm}|p{1.17cm}|p{0.64cm}|p{1.71cm}|p{1.6cm}|p{1.07cm}|p{1.07cm}|p{1.07cm}|
-
-.. _video-standards:
-
-.. flat-table:: Video Standards (based on :ref:`itu470`)
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Characteristics
-      - M/NTSC [#f2]_
-      - M/PAL
-      - N/PAL [#f3]_
-      - B, B1, G/PAL
-      - D, D1, K/PAL
-      - H/PAL
-      - I/PAL
-      - B, G/SECAM
-      - D, K/SECAM
-      - K1/SECAM
-      - L/SECAM
-    * - Frame lines
-      - :cspan:`1` 525
-      - :cspan:`8` 625
-    * - Frame period (s)
-      - :cspan:`1` 1001/30000
-      - :cspan:`8` 1/25
-    * - Chrominance sub-carrier frequency (Hz)
-      - 3579545 ± 10
-      - 3579611.49 ± 10
-      - 4433618.75 ± 5
-
-	(3582056.25 ± 5)
-      - :cspan:`3` 4433618.75 ± 5
-      - 4433618.75 ± 1
-      - :cspan:`2` f\ :sub:`OR` = 4406250 ± 2000,
-
-	f\ :sub:`OB` = 4250000 ± 2000
-    * - Nominal radio-frequency channel bandwidth (MHz)
-      - 6
-      - 6
-      - 6
-      - B: 7; B1, G: 8
-      - 8
-      - 8
-      - 8
-      - 8
-      - 8
-      - 8
-      - 8
-    * - Sound carrier relative to vision carrier (MHz)
-      - 4.5
-      - 4.5
-      - 4.5
-      - 5.5 ± 0.001  [#f4]_  [#f5]_  [#f6]_  [#f7]_
-      - 6.5 ± 0.001
-      - 5.5
-      - 5.9996 ± 0.0005
-      - 5.5 ± 0.001
-      - 6.5 ± 0.001
-      - 6.5
-      - 6.5 [#f8]_
-
-.. raw:: latex
-
-    \endgroup
-
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_standard` ``index`` is out
-    of bounds.
-
-ENODATA
-    Standard video timings are not supported for this input or output.
-
-.. [#f1]
-   The supported standards may overlap and we need an unambiguous set to
-   find the current standard returned by :ref:`VIDIOC_G_STD <VIDIOC_G_STD>`.
-
-.. [#f2]
-   Japan uses a standard similar to M/NTSC (V4L2_STD_NTSC_M_JP).
-
-.. [#f3]
-   The values in brackets apply to the combination N/PAL a.k.a.
-   N\ :sub:`C` used in Argentina (V4L2_STD_PAL_Nc).
-
-.. [#f4]
-   In the Federal Republic of Germany, Austria, Italy, the Netherlands,
-   Slovakia and Switzerland a system of two sound carriers is used, the
-   frequency of the second carrier being 242.1875 kHz above the
-   frequency of the first sound carrier. For stereophonic sound
-   transmissions a similar system is used in Australia.
-
-.. [#f5]
-   New Zealand uses a sound carrier displaced 5.4996 ± 0.0005 MHz from
-   the vision carrier.
-
-.. [#f6]
-   In Denmark, Finland, New Zealand, Sweden and Spain a system of two
-   sound carriers is used. In Iceland, Norway and Poland the same system
-   is being introduced. The second carrier is 5.85 MHz above the vision
-   carrier and is DQPSK modulated with 728 kbit/s sound and data
-   multiplex. (NICAM system)
-
-.. [#f7]
-   In the United Kingdom, a system of two sound carriers is used. The
-   second sound carrier is 6.552 MHz above the vision carrier and is
-   DQPSK modulated with a 728 kbit/s sound and data multiplex able to
-   carry two sound channels. (NICAM system)
-
-.. [#f8]
-   In France, a digital carrier 5.85 MHz away from the vision carrier
-   may be used in addition to the main sound carrier. It is modulated in
-   differentially encoded QPSK with a 728 kbit/s sound and data
-   multiplexer capable of carrying two sound channels. (NICAM system)
diff --git a/Documentation/media/uapi/v4l/vidioc-expbuf.rst b/Documentation/media/uapi/v4l/vidioc-expbuf.rst
deleted file mode 100644
index 4bd8cd79754c..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-expbuf.rst
+++ /dev/null
@@ -1,175 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_EXPBUF:
-
-*******************
-ioctl VIDIOC_EXPBUF
-*******************
-
-Name
-====
-
-VIDIOC_EXPBUF - Export a buffer as a DMABUF file descriptor.
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_EXPBUF, struct v4l2_exportbuffer *argp )
-    :name: VIDIOC_EXPBUF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_exportbuffer`.
-
-
-Description
-===========
-
-This ioctl is an extension to the :ref:`memory mapping <mmap>` I/O
-method, therefore it is available only for ``V4L2_MEMORY_MMAP`` buffers.
-It can be used to export a buffer as a DMABUF file at any time after
-buffers have been allocated with the
-:ref:`VIDIOC_REQBUFS` ioctl.
-
-To export a buffer, applications fill struct
-:c:type:`v4l2_exportbuffer`. The ``type`` field is
-set to the same buffer type as was previously used with struct
-:c:type:`v4l2_requestbuffers` ``type``.
-Applications must also set the ``index`` field. Valid index numbers
-range from zero to the number of buffers allocated with
-:ref:`VIDIOC_REQBUFS` (struct
-:c:type:`v4l2_requestbuffers` ``count``) minus
-one. For the multi-planar API, applications set the ``plane`` field to
-the index of the plane to be exported. Valid planes range from zero to
-the maximal number of valid planes for the currently active format. For
-the single-planar API, applications must set ``plane`` to zero.
-Additional flags may be posted in the ``flags`` field. Refer to a manual
-for open() for details. Currently only O_CLOEXEC, O_RDONLY, O_WRONLY,
-and O_RDWR are supported. All other fields must be set to zero. In the
-case of multi-planar API, every plane is exported separately using
-multiple :ref:`VIDIOC_EXPBUF` calls.
-
-After calling :ref:`VIDIOC_EXPBUF` the ``fd`` field will be set by a
-driver. This is a DMABUF file descriptor. The application may pass it to
-other DMABUF-aware devices. Refer to :ref:`DMABUF importing <dmabuf>`
-for details about importing DMABUF files into V4L2 nodes. It is
-recommended to close a DMABUF file when it is no longer used to allow
-the associated memory to be reclaimed.
-
-
-Examples
-========
-
-
-.. code-block:: c
-
-    int buffer_export(int v4lfd, enum v4l2_buf_type bt, int index, int *dmafd)
-    {
-	struct v4l2_exportbuffer expbuf;
-
-	memset(&expbuf, 0, sizeof(expbuf));
-	expbuf.type = bt;
-	expbuf.index = index;
-	if (ioctl(v4lfd, VIDIOC_EXPBUF, &expbuf) == -1) {
-	    perror("VIDIOC_EXPBUF");
-	    return -1;
-	}
-
-	*dmafd = expbuf.fd;
-
-	return 0;
-    }
-
-
-.. code-block:: c
-
-    int buffer_export_mp(int v4lfd, enum v4l2_buf_type bt, int index,
-	int dmafd[], int n_planes)
-    {
-	int i;
-
-	for (i = 0; i < n_planes; ++i) {
-	    struct v4l2_exportbuffer expbuf;
-
-	    memset(&expbuf, 0, sizeof(expbuf));
-	    expbuf.type = bt;
-	    expbuf.index = index;
-	    expbuf.plane = i;
-	    if (ioctl(v4lfd, VIDIOC_EXPBUF, &expbuf) == -1) {
-		perror("VIDIOC_EXPBUF");
-		while (i)
-		    close(dmafd[--i]);
-		return -1;
-	    }
-	    dmafd[i] = expbuf.fd;
-	}
-
-	return 0;
-    }
-
-
-.. c:type:: v4l2_exportbuffer
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_exportbuffer
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - Type of the buffer, same as struct
-	:c:type:`v4l2_format` ``type`` or struct
-	:c:type:`v4l2_requestbuffers` ``type``, set
-	by the application. See :c:type:`v4l2_buf_type`
-    * - __u32
-      - ``index``
-      - Number of the buffer, set by the application. This field is only
-	used for :ref:`memory mapping <mmap>` I/O and can range from
-	zero to the number of buffers allocated with the
-	:ref:`VIDIOC_REQBUFS` and/or
-	:ref:`VIDIOC_CREATE_BUFS` ioctls.
-    * - __u32
-      - ``plane``
-      - Index of the plane to be exported when using the multi-planar API.
-	Otherwise this value must be set to zero.
-    * - __u32
-      - ``flags``
-      - Flags for the newly created file, currently only ``O_CLOEXEC``,
-	``O_RDONLY``, ``O_WRONLY``, and ``O_RDWR`` are supported, refer to
-	the manual of open() for more details.
-    * - __s32
-      - ``fd``
-      - The DMABUF file descriptor associated with a buffer. Set by the
-	driver.
-    * - __u32
-      - ``reserved[11]``
-      - Reserved field for future use. Drivers and applications must set
-	the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    A queue is not in MMAP mode or DMABUF exporting is not supported or
-    ``flags`` or ``type`` or ``index`` or ``plane`` fields are invalid.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-audio.rst b/Documentation/media/uapi/v4l/vidioc-g-audio.rst
deleted file mode 100644
index 7af4fe478ba4..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-audio.rst
+++ /dev/null
@@ -1,135 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_AUDIO:
-
-************************************
-ioctl VIDIOC_G_AUDIO, VIDIOC_S_AUDIO
-************************************
-
-Name
-====
-
-VIDIOC_G_AUDIO - VIDIOC_S_AUDIO - Query or select the current audio input and its attributes
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_AUDIO, struct v4l2_audio *argp )
-    :name: VIDIOC_G_AUDIO
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_AUDIO, const struct v4l2_audio *argp )
-    :name: VIDIOC_S_AUDIO
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_audio`.
-
-
-Description
-===========
-
-To query the current audio input applications zero out the ``reserved``
-array of a struct :c:type:`v4l2_audio` and call the
-:ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` ioctl with a pointer to this structure. Drivers fill
-the rest of the structure or return an ``EINVAL`` error code when the device
-has no audio inputs, or none which combine with the current video input.
-
-Audio inputs have one writable property, the audio mode. To select the
-current audio input *and* change the audio mode, applications initialize
-the ``index`` and ``mode`` fields, and the ``reserved`` array of a
-struct :c:type:`v4l2_audio` structure and call the :ref:`VIDIOC_S_AUDIO <VIDIOC_G_AUDIO>`
-ioctl. Drivers may switch to a different audio mode if the request
-cannot be satisfied. However, this is a write-only ioctl, it does not
-return the actual new audio mode.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_audio
-
-.. flat-table:: struct v4l2_audio
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - Identifies the audio input, set by the driver or application.
-    * - __u8
-      - ``name``\ [32]
-      - Name of the audio input, a NUL-terminated ASCII string, for
-	example: "Line In". This information is intended for the user,
-	preferably the connector label on the device itself.
-    * - __u32
-      - ``capability``
-      - Audio capability flags, see :ref:`audio-capability`.
-    * - __u32
-      - ``mode``
-      - Audio mode flags set by drivers and applications (on
-	:ref:`VIDIOC_S_AUDIO <VIDIOC_G_AUDIO>` ioctl), see :ref:`audio-mode`.
-    * - __u32
-      - ``reserved``\ [2]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _audio-capability:
-
-.. flat-table:: Audio Capability Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_AUDCAP_STEREO``
-      - 0x00001
-      - This is a stereo input. The flag is intended to automatically
-	disable stereo recording etc. when the signal is always monaural.
-	The API provides no means to detect if stereo is *received*,
-	unless the audio input belongs to a tuner.
-    * - ``V4L2_AUDCAP_AVL``
-      - 0x00002
-      - Automatic Volume Level mode is supported.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _audio-mode:
-
-.. flat-table:: Audio Mode Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_AUDMODE_AVL``
-      - 0x00001
-      - AVL mode is on.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    No audio inputs combine with the current video input, or the number
-    of the selected audio input is out of bounds or it does not combine.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst b/Documentation/media/uapi/v4l/vidioc-g-audioout.rst
deleted file mode 100644
index c6ea0396a96a..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst
+++ /dev/null
@@ -1,108 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_AUDOUT:
-
-**************************************
-ioctl VIDIOC_G_AUDOUT, VIDIOC_S_AUDOUT
-**************************************
-
-Name
-====
-
-VIDIOC_G_AUDOUT - VIDIOC_S_AUDOUT - Query or select the current audio output
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_AUDOUT, struct v4l2_audioout *argp )
-    :name: VIDIOC_G_AUDOUT
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_AUDOUT, const struct v4l2_audioout *argp )
-    :name: VIDIOC_S_AUDOUT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_audioout`.
-
-
-Description
-===========
-
-To query the current audio output applications zero out the ``reserved``
-array of a struct :c:type:`v4l2_audioout` and call the
-``VIDIOC_G_AUDOUT`` ioctl with a pointer to this structure. Drivers fill
-the rest of the structure or return an ``EINVAL`` error code when the device
-has no audio inputs, or none which combine with the current video
-output.
-
-Audio outputs have no writable properties. Nevertheless, to select the
-current audio output applications can initialize the ``index`` field and
-``reserved`` array (which in the future may contain writable properties)
-of a struct :c:type:`v4l2_audioout` structure and call the
-``VIDIOC_S_AUDOUT`` ioctl. Drivers switch to the requested output or
-return the ``EINVAL`` error code when the index is out of bounds. This is a
-write-only ioctl, it does not return the current audio output attributes
-as ``VIDIOC_G_AUDOUT`` does.
-
-.. note::
-
-   Connectors on a TV card to loop back the received audio signal
-   to a sound card are not audio outputs in this sense.
-
-
-.. c:type:: v4l2_audioout
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_audioout
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - Identifies the audio output, set by the driver or application.
-    * - __u8
-      - ``name``\ [32]
-      - Name of the audio output, a NUL-terminated ASCII string, for
-	example: "Line Out". This information is intended for the user,
-	preferably the connector label on the device itself.
-    * - __u32
-      - ``capability``
-      - Audio capability flags, none defined yet. Drivers must set this
-	field to zero.
-    * - __u32
-      - ``mode``
-      - Audio mode, none defined yet. Drivers and applications (on
-	``VIDIOC_S_AUDOUT``) must set this field to zero.
-    * - __u32
-      - ``reserved``\ [2]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    No audio outputs combine with the current video output, or the
-    number of the selected audio output is out of bounds or it does not
-    combine.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-g-crop.rst
deleted file mode 100644
index 1eff59dc5f35..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-crop.rst
+++ /dev/null
@@ -1,119 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_CROP:
-
-**********************************
-ioctl VIDIOC_G_CROP, VIDIOC_S_CROP
-**********************************
-
-Name
-====
-
-VIDIOC_G_CROP - VIDIOC_S_CROP - Get or set the current cropping rectangle
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_CROP, struct v4l2_crop *argp )
-    :name: VIDIOC_G_CROP
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_CROP, const struct v4l2_crop *argp )
-    :name: VIDIOC_S_CROP
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_crop`.
-
-
-Description
-===========
-
-To query the cropping rectangle size and position applications set the
-``type`` field of a struct :c:type:`v4l2_crop` structure to the
-respective buffer (stream) type and call the :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` ioctl
-with a pointer to this structure. The driver fills the rest of the
-structure or returns the ``EINVAL`` error code if cropping is not supported.
-
-To change the cropping rectangle applications initialize the ``type``
-and struct :c:type:`v4l2_rect` substructure named ``c`` of a
-v4l2_crop structure and call the :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` ioctl with a pointer
-to this structure.
-
-The driver first adjusts the requested dimensions against hardware
-limits, i. e. the bounds given by the capture/output window, and it
-rounds to the closest possible values of horizontal and vertical offset,
-width and height. In particular the driver must round the vertical
-offset of the cropping rectangle to frame lines modulo two, such that
-the field order cannot be confused.
-
-Second the driver adjusts the image size (the opposite rectangle of the
-scaling process, source or target depending on the data direction) to
-the closest size possible while maintaining the current horizontal and
-vertical scaling factor.
-
-Finally the driver programs the hardware with the actual cropping and
-image parameters. :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` is a write-only ioctl, it does not
-return the actual parameters. To query them applications must call
-:ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_G_FMT`. When the
-parameters are unsuitable the application may modify the cropping or
-image parameters and repeat the cycle until satisfactory parameters have
-been negotiated.
-
-When cropping is not supported then no parameters are changed and
-:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` returns the ``EINVAL`` error code.
-
-
-.. c:type:: v4l2_crop
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_crop
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - Type of the data stream, set by the application. Only these types
-	are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
-	``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and
-	``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note below.
-    * - struct :c:type:`v4l2_rect`
-      - ``c``
-      - Cropping rectangle. The same co-ordinate system as for struct
-	:c:type:`v4l2_cropcap` ``bounds`` is used.
-
-.. note::
-   Unfortunately in the case of multiplanar buffer types
-   (``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``)
-   this API was messed up with regards to how the :c:type:`v4l2_crop` ``type`` field
-   should be filled in. Some drivers only accepted the ``_MPLANE`` buffer type while
-   other drivers only accepted a non-multiplanar buffer type (i.e. without the
-   ``_MPLANE`` at the end).
-
-   Starting with kernel 4.13 both variations are allowed.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-ENODATA
-    Cropping is not supported for this input or output.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst b/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst
deleted file mode 100644
index 8493b52adbb2..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst
+++ /dev/null
@@ -1,106 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_CTRL:
-
-**********************************
-ioctl VIDIOC_G_CTRL, VIDIOC_S_CTRL
-**********************************
-
-Name
-====
-
-VIDIOC_G_CTRL - VIDIOC_S_CTRL - Get or set the value of a control
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_CTRL, struct v4l2_control *argp )
-    :name: VIDIOC_G_CTRL
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_CTRL, struct v4l2_control *argp )
-    :name: VIDIOC_S_CTRL
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_control`.
-
-
-Description
-===========
-
-To get the current value of a control applications initialize the ``id``
-field of a struct :c:type:`v4l2_control` and call the
-:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` ioctl with a pointer to this structure. To change the
-value of a control applications initialize the ``id`` and ``value``
-fields of a struct :c:type:`v4l2_control` and call the
-:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctl.
-
-When the ``id`` is invalid drivers return an ``EINVAL`` error code. When the
-``value`` is out of bounds drivers can choose to take the closest valid
-value or return an ``ERANGE`` error code, whatever seems more appropriate.
-However, :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` is a write-only ioctl, it does not return the
-actual new value. If the ``value`` is inappropriate for the control
-(e.g. if it refers to an unsupported menu index of a menu control), then
-EINVAL error code is returned as well.
-
-These ioctls work only with user controls. For other control classes the
-:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
-:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` or
-:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` must be used.
-
-
-.. c:type:: v4l2_control
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_control
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``id``
-      - Identifies the control, set by the application.
-    * - __s32
-      - ``value``
-      - New value or current value.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_control` ``id`` is invalid
-    or the ``value`` is inappropriate for the given control (i.e. if a
-    menu item is selected that is not supported by the driver according
-    to :ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>`).
-
-ERANGE
-    The struct :c:type:`v4l2_control` ``value`` is out of
-    bounds.
-
-EBUSY
-    The control is temporarily not changeable, possibly because another
-    applications took over control of the device function this control
-    belongs to.
-
-EACCES
-    Attempt to set a read-only control or to get a write-only control.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
deleted file mode 100644
index e36dd2622857..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
+++ /dev/null
@@ -1,312 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_DV_TIMINGS:
-
-**********************************************
-ioctl VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS
-**********************************************
-
-Name
-====
-
-VIDIOC_G_DV_TIMINGS - VIDIOC_S_DV_TIMINGS - VIDIOC_SUBDEV_G_DV_TIMINGS - VIDIOC_SUBDEV_S_DV_TIMINGS - Get or set DV timings for input or output
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_DV_TIMINGS, struct v4l2_dv_timings *argp )
-    :name: VIDIOC_G_DV_TIMINGS
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_DV_TIMINGS, struct v4l2_dv_timings *argp )
-    :name: VIDIOC_S_DV_TIMINGS
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_DV_TIMINGS, struct v4l2_dv_timings *argp )
-    :name: VIDIOC_SUBDEV_G_DV_TIMINGS
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_DV_TIMINGS, struct v4l2_dv_timings *argp )
-    :name: VIDIOC_SUBDEV_S_DV_TIMINGS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_dv_timings`.
-
-
-Description
-===========
-
-To set DV timings for the input or output, applications use the
-:ref:`VIDIOC_S_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>` ioctl and to get the current timings,
-applications use the :ref:`VIDIOC_G_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>` ioctl. The detailed timing
-information is filled in using the structure struct
-:c:type:`v4l2_dv_timings`. These ioctls take a
-pointer to the struct :c:type:`v4l2_dv_timings`
-structure as argument. If the ioctl is not supported or the timing
-values are not correct, the driver returns ``EINVAL`` error code.
-
-The ``linux/v4l2-dv-timings.h`` header can be used to get the timings of
-the formats in the :ref:`cea861` and :ref:`vesadmt` standards. If
-the current input or output does not support DV timings (e.g. if
-:ref:`VIDIOC_ENUMINPUT` does not set the
-``V4L2_IN_CAP_DV_TIMINGS`` flag), then ``ENODATA`` error code is returned.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    This ioctl is not supported, or the :ref:`VIDIOC_S_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>`
-    parameter was unsuitable.
-
-ENODATA
-    Digital video timings are not supported for this input or output.
-
-EBUSY
-    The device is busy and therefore can not change the timings.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_bt_timings
-
-.. flat-table:: struct v4l2_bt_timings
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``width``
-      - Width of the active video in pixels.
-    * - __u32
-      - ``height``
-      - Height of the active video frame in lines. So for interlaced
-	formats the height of the active video in each field is
-	``height``/2.
-    * - __u32
-      - ``interlaced``
-      - Progressive (``V4L2_DV_PROGRESSIVE``) or interlaced (``V4L2_DV_INTERLACED``).
-    * - __u32
-      - ``polarities``
-      - This is a bit mask that defines polarities of sync signals. bit 0
-	(``V4L2_DV_VSYNC_POS_POL``) is for vertical sync polarity and bit
-	1 (``V4L2_DV_HSYNC_POS_POL``) is for horizontal sync polarity. If
-	the bit is set (1) it is positive polarity and if is cleared (0),
-	it is negative polarity.
-    * - __u64
-      - ``pixelclock``
-      - Pixel clock in Hz. Ex. 74.25MHz->74250000
-    * - __u32
-      - ``hfrontporch``
-      - Horizontal front porch in pixels
-    * - __u32
-      - ``hsync``
-      - Horizontal sync length in pixels
-    * - __u32
-      - ``hbackporch``
-      - Horizontal back porch in pixels
-    * - __u32
-      - ``vfrontporch``
-      - Vertical front porch in lines. For interlaced formats this refers
-	to the odd field (aka field 1).
-    * - __u32
-      - ``vsync``
-      - Vertical sync length in lines. For interlaced formats this refers
-	to the odd field (aka field 1).
-    * - __u32
-      - ``vbackporch``
-      - Vertical back porch in lines. For interlaced formats this refers
-	to the odd field (aka field 1).
-    * - __u32
-      - ``il_vfrontporch``
-      - Vertical front porch in lines for the even field (aka field 2) of
-	interlaced field formats. Must be 0 for progressive formats.
-    * - __u32
-      - ``il_vsync``
-      - Vertical sync length in lines for the even field (aka field 2) of
-	interlaced field formats. Must be 0 for progressive formats.
-    * - __u32
-      - ``il_vbackporch``
-      - Vertical back porch in lines for the even field (aka field 2) of
-	interlaced field formats. Must be 0 for progressive formats.
-    * - __u32
-      - ``standards``
-      - The video standard(s) this format belongs to. This will be filled
-	in by the driver. Applications must set this to 0. See
-	:ref:`dv-bt-standards` for a list of standards.
-    * - __u32
-      - ``flags``
-      - Several flags giving more information about the format. See
-	:ref:`dv-bt-flags` for a description of the flags.
-    * - struct :c:type:`v4l2_fract`
-      - ``picture_aspect``
-      - The picture aspect if the pixels are not square. Only valid if the
-        ``V4L2_DV_FL_HAS_PICTURE_ASPECT`` flag is set.
-    * - __u8
-      - ``cea861_vic``
-      - The Video Identification Code according to the CEA-861 standard.
-        Only valid if the ``V4L2_DV_FL_HAS_CEA861_VIC`` flag is set.
-    * - __u8
-      - ``hdmi_vic``
-      - The Video Identification Code according to the HDMI standard.
-        Only valid if the ``V4L2_DV_FL_HAS_HDMI_VIC`` flag is set.
-    * - __u8
-      - ``reserved[46]``
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-
-
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{7.0cm}|p{3.5cm}|
-
-.. c:type:: v4l2_dv_timings
-
-.. flat-table:: struct v4l2_dv_timings
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - Type of DV timings as listed in :ref:`dv-timing-types`.
-    * - union {
-      - (anonymous)
-    * - struct :c:type:`v4l2_bt_timings`
-      - ``bt``
-      - Timings defined by BT.656/1120 specifications
-    * - __u32
-      - ``reserved``\ [32]
-      -
-    * - }
-      -
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. _dv-timing-types:
-
-.. flat-table:: DV Timing types
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - Timing type
-      - value
-      - Description
-    * -
-      -
-      -
-    * - ``V4L2_DV_BT_656_1120``
-      - 0
-      - BT.656/1120 timings
-
-.. tabularcolumns:: |p{4.5cm}|p{12.8cm}|
-
-.. _dv-bt-standards:
-
-.. flat-table:: DV BT Timing standards
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - Timing standard
-      - Description
-    * - ``V4L2_DV_BT_STD_CEA861``
-      - The timings follow the CEA-861 Digital TV Profile standard
-    * - ``V4L2_DV_BT_STD_DMT``
-      - The timings follow the VESA Discrete Monitor Timings standard
-    * - ``V4L2_DV_BT_STD_CVT``
-      - The timings follow the VESA Coordinated Video Timings standard
-    * - ``V4L2_DV_BT_STD_GTF``
-      - The timings follow the VESA Generalized Timings Formula standard
-    * - ``V4L2_DV_BT_STD_SDI``
-      - The timings follow the SDI Timings standard.
-	There are no horizontal syncs/porches at all in this format.
-	Total blanking timings must be set in hsync or vsync fields only.
-
-.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
-
-.. _dv-bt-flags:
-
-.. flat-table:: DV BT Timing flags
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - Flag
-      - Description
-    * - ``V4L2_DV_FL_REDUCED_BLANKING``
-      - CVT/GTF specific: the timings use reduced blanking (CVT) or the
-	'Secondary GTF' curve (GTF). In both cases the horizontal and/or
-	vertical blanking intervals are reduced, allowing a higher
-	resolution over the same bandwidth. This is a read-only flag,
-	applications must not set this.
-    * - ``V4L2_DV_FL_CAN_REDUCE_FPS``
-      - CEA-861 specific: set for CEA-861 formats with a framerate that is
-	a multiple of six. These formats can be optionally played at 1 /
-	1.001 speed to be compatible with 60 Hz based standards such as
-	NTSC and PAL-M that use a framerate of 29.97 frames per second. If
-	the transmitter can't generate such frequencies, then the flag
-	will also be cleared. This is a read-only flag, applications must
-	not set this.
-    * - ``V4L2_DV_FL_REDUCED_FPS``
-      - CEA-861 specific: only valid for video transmitters or video
-        receivers that have the ``V4L2_DV_FL_CAN_DETECT_REDUCED_FPS``
-	set. This flag is cleared otherwise. It is also only valid for
-	formats with the ``V4L2_DV_FL_CAN_REDUCE_FPS`` flag set, for other
-	formats the flag will be cleared by the driver.
-
-	If the application sets this flag for a transmitter, then the
-	pixelclock used to set up the transmitter is divided by 1.001 to
-	make it compatible with NTSC framerates. If the transmitter can't
-	generate such frequencies, then the flag will be cleared.
-
-	If a video receiver detects that the format uses a reduced framerate,
-	then it will set this flag to signal this to the application.
-    * - ``V4L2_DV_FL_HALF_LINE``
-      - Specific to interlaced formats: if set, then the vertical
-	frontporch of field 1 (aka the odd field) is really one half-line
-	longer and the vertical backporch of field 2 (aka the even field)
-	is really one half-line shorter, so each field has exactly the
-	same number of half-lines. Whether half-lines can be detected or
-	used depends on the hardware.
-    * - ``V4L2_DV_FL_IS_CE_VIDEO``
-      - If set, then this is a Consumer Electronics (CE) video format.
-	Such formats differ from other formats (commonly called IT
-	formats) in that if R'G'B' encoding is used then by default the
-	R'G'B' values use limited range (i.e. 16-235) as opposed to full
-	range (i.e. 0-255). All formats defined in CEA-861 except for the
-	640x480p59.94 format are CE formats.
-    * - ``V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE``
-      - Some formats like SMPTE-125M have an interlaced signal with a odd
-	total height. For these formats, if this flag is set, the first
-	field has the extra line. Else, it is the second field.
-    * - ``V4L2_DV_FL_HAS_PICTURE_ASPECT``
-      - If set, then the picture_aspect field is valid. Otherwise assume that
-        the pixels are square, so the picture aspect ratio is the same as the
-	width to height ratio.
-    * - ``V4L2_DV_FL_HAS_CEA861_VIC``
-      - If set, then the cea861_vic field is valid and contains the Video
-        Identification Code as per the CEA-861 standard.
-    * - ``V4L2_DV_FL_HAS_HDMI_VIC``
-      - If set, then the hdmi_vic field is valid and contains the Video
-        Identification Code as per the HDMI standard (HDMI Vendor Specific
-	InfoFrame).
-    * - ``V4L2_DV_FL_CAN_DETECT_REDUCED_FPS``
-      - CEA-861 specific: only valid for video receivers, the flag is
-        cleared by transmitters.
-        If set, then the hardware can detect the difference between
-	regular framerates and framerates reduced by 1000/1001. E.g.:
-	60 vs 59.94 Hz, 30 vs 29.97 Hz or 24 vs 23.976 Hz.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-edid.rst b/Documentation/media/uapi/v4l/vidioc-g-edid.rst
deleted file mode 100644
index e55b349a0c7e..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-edid.rst
+++ /dev/null
@@ -1,154 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_EDID:
-
-******************************************************************************
-ioctl VIDIOC_G_EDID, VIDIOC_S_EDID, VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID
-******************************************************************************
-
-Name
-====
-
-VIDIOC_G_EDID - VIDIOC_S_EDID - VIDIOC_SUBDEV_G_EDID - VIDIOC_SUBDEV_S_EDID - Get or set the EDID of a video receiver/transmitter
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_EDID, struct v4l2_edid *argp )
-    :name: VIDIOC_G_EDID
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_EDID, struct v4l2_edid *argp )
-    :name: VIDIOC_S_EDID
-
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_EDID, struct v4l2_edid *argp )
-    :name: VIDIOC_SUBDEV_G_EDID
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_EDID, struct v4l2_edid *argp )
-    :name: VIDIOC_SUBDEV_S_EDID
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-   Pointer to struct :c:type:`v4l2_edid`.
-
-
-Description
-===========
-
-These ioctls can be used to get or set an EDID associated with an input
-from a receiver or an output of a transmitter device. They can be used
-with subdevice nodes (/dev/v4l-subdevX) or with video nodes
-(/dev/videoX).
-
-When used with video nodes the ``pad`` field represents the input (for
-video capture devices) or output (for video output devices) index as is
-returned by :ref:`VIDIOC_ENUMINPUT` and
-:ref:`VIDIOC_ENUMOUTPUT` respectively. When used
-with subdevice nodes the ``pad`` field represents the input or output
-pad of the subdevice. If there is no EDID support for the given ``pad``
-value, then the ``EINVAL`` error code will be returned.
-
-To get the EDID data the application has to fill in the ``pad``,
-``start_block``, ``blocks`` and ``edid`` fields, zero the ``reserved``
-array and call :ref:`VIDIOC_G_EDID <VIDIOC_G_EDID>`. The current EDID from block
-``start_block`` and of size ``blocks`` will be placed in the memory
-``edid`` points to. The ``edid`` pointer must point to memory at least
-``blocks`` * 128 bytes large (the size of one block is 128 bytes).
-
-If there are fewer blocks than specified, then the driver will set
-``blocks`` to the actual number of blocks. If there are no EDID blocks
-available at all, then the error code ``ENODATA`` is set.
-
-If blocks have to be retrieved from the sink, then this call will block
-until they have been read.
-
-If ``start_block`` and ``blocks`` are both set to 0 when
-:ref:`VIDIOC_G_EDID <VIDIOC_G_EDID>` is called, then the driver will set ``blocks`` to the
-total number of available EDID blocks and it will return 0 without
-copying any data. This is an easy way to discover how many EDID blocks
-there are.
-
-.. note::
-
-   If there are no EDID blocks available at all, then
-   the driver will set ``blocks`` to 0 and it returns 0.
-
-To set the EDID blocks of a receiver the application has to fill in the
-``pad``, ``blocks`` and ``edid`` fields, set ``start_block`` to 0 and
-zero the ``reserved`` array. It is not possible to set part of an EDID,
-it is always all or nothing. Setting the EDID data is only valid for
-receivers as it makes no sense for a transmitter.
-
-The driver assumes that the full EDID is passed in. If there are more
-EDID blocks than the hardware can handle then the EDID is not written,
-but instead the error code ``E2BIG`` is set and ``blocks`` is set to the
-maximum that the hardware supports. If ``start_block`` is any value
-other than 0 then the error code ``EINVAL`` is set.
-
-To disable an EDID you set ``blocks`` to 0. Depending on the hardware
-this will drive the hotplug pin low and/or block the source from reading
-the EDID data in some way. In any case, the end result is the same: the
-EDID is no longer available.
-
-
-.. c:type:: v4l2_edid
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_edid
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``pad``
-      - Pad for which to get/set the EDID blocks. When used with a video
-	device node the pad represents the input or output index as
-	returned by :ref:`VIDIOC_ENUMINPUT` and
-	:ref:`VIDIOC_ENUMOUTPUT` respectively.
-    * - __u32
-      - ``start_block``
-      - Read the EDID from starting with this block. Must be 0 when
-	setting the EDID.
-    * - __u32
-      - ``blocks``
-      - The number of blocks to get or set. Must be less or equal to 256
-	(the maximum number of blocks as defined by the standard). When
-	you set the EDID and ``blocks`` is 0, then the EDID is disabled or
-	erased.
-    * - __u32
-      - ``reserved``\ [5]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-    * - __u8 *
-      - ``edid``
-      - Pointer to memory that contains the EDID. The minimum size is
-	``blocks`` * 128.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-``ENODATA``
-    The EDID data is not available.
-
-``E2BIG``
-    The EDID data you provided is more than the hardware can handle.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst b/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst
deleted file mode 100644
index e285a1f14cdf..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst
+++ /dev/null
@@ -1,156 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_ENC_INDEX:
-
-************************
-ioctl VIDIOC_G_ENC_INDEX
-************************
-
-Name
-====
-
-VIDIOC_G_ENC_INDEX - Get meta data about a compressed video stream
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_ENC_INDEX, struct v4l2_enc_idx *argp )
-    :name: VIDIOC_G_ENC_INDEX
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_enc_idx`.
-
-
-Description
-===========
-
-The :ref:`VIDIOC_G_ENC_INDEX <VIDIOC_G_ENC_INDEX>` ioctl provides meta data about a compressed
-video stream the same or another application currently reads from the
-driver, which is useful for random access into the stream without
-decoding it.
-
-To read the data applications must call :ref:`VIDIOC_G_ENC_INDEX <VIDIOC_G_ENC_INDEX>` with a
-pointer to a struct :c:type:`v4l2_enc_idx`. On success
-the driver fills the ``entry`` array, stores the number of elements
-written in the ``entries`` field, and initializes the ``entries_cap``
-field.
-
-Each element of the ``entry`` array contains meta data about one
-picture. A :ref:`VIDIOC_G_ENC_INDEX <VIDIOC_G_ENC_INDEX>` call reads up to
-``V4L2_ENC_IDX_ENTRIES`` entries from a driver buffer, which can hold up
-to ``entries_cap`` entries. This number can be lower or higher than
-``V4L2_ENC_IDX_ENTRIES``, but not zero. When the application fails to
-read the meta data in time the oldest entries will be lost. When the
-buffer is empty or no capturing/encoding is in progress, ``entries``
-will be zero.
-
-Currently this ioctl is only defined for MPEG-2 program streams and
-video elementary streams.
-
-
-.. tabularcolumns:: |p{3.8cm}|p{5.6cm}|p{8.1cm}|
-
-.. c:type:: v4l2_enc_idx
-
-.. flat-table:: struct v4l2_enc_idx
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 3 8
-
-    * - __u32
-      - ``entries``
-      - The number of entries the driver stored in the ``entry`` array.
-    * - __u32
-      - ``entries_cap``
-      - The number of entries the driver can buffer. Must be greater than
-	zero.
-    * - __u32
-      - ``reserved``\ [4]
-      - Reserved for future extensions. Drivers must set the
-	array to zero.
-    * - struct :c:type:`v4l2_enc_idx_entry`
-      - ``entry``\ [``V4L2_ENC_IDX_ENTRIES``]
-      - Meta data about a compressed video stream. Each element of the
-	array corresponds to one picture, sorted in ascending order by
-	their ``offset``.
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_enc_idx_entry
-
-.. flat-table:: struct v4l2_enc_idx_entry
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u64
-      - ``offset``
-      - The offset in bytes from the beginning of the compressed video
-	stream to the beginning of this picture, that is a *PES packet
-	header* as defined in :ref:`mpeg2part1` or a *picture header* as
-	defined in :ref:`mpeg2part2`. When the encoder is stopped, the
-	driver resets the offset to zero.
-    * - __u64
-      - ``pts``
-      - The 33 bit *Presentation Time Stamp* of this picture as defined in
-	:ref:`mpeg2part1`.
-    * - __u32
-      - ``length``
-      - The length of this picture in bytes.
-    * - __u32
-      - ``flags``
-      - Flags containing the coding type of this picture, see
-	:ref:`enc-idx-flags`.
-    * - __u32
-      - ``reserved``\ [2]
-      - Reserved for future extensions. Drivers must set the array to
-	zero.
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _enc-idx-flags:
-
-.. flat-table:: Index Entry Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_ENC_IDX_FRAME_I``
-      - 0x00
-      - This is an Intra-coded picture.
-    * - ``V4L2_ENC_IDX_FRAME_P``
-      - 0x01
-      - This is a Predictive-coded picture.
-    * - ``V4L2_ENC_IDX_FRAME_B``
-      - 0x02
-      - This is a Bidirectionally predictive-coded picture.
-    * - ``V4L2_ENC_IDX_FRAME_MASK``
-      - 0x0F
-      - *AND* the flags field with this mask to obtain the picture coding
-	type.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst
deleted file mode 100644
index cdb2a2a512d6..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst
+++ /dev/null
@@ -1,416 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_EXT_CTRLS:
-
-******************************************************************
-ioctl VIDIOC_G_EXT_CTRLS, VIDIOC_S_EXT_CTRLS, VIDIOC_TRY_EXT_CTRLS
-******************************************************************
-
-Name
-====
-
-VIDIOC_G_EXT_CTRLS - VIDIOC_S_EXT_CTRLS - VIDIOC_TRY_EXT_CTRLS - Get or set the value of several controls, try control values
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_EXT_CTRLS, struct v4l2_ext_controls *argp )
-    :name: VIDIOC_G_EXT_CTRLS
-
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_EXT_CTRLS, struct v4l2_ext_controls *argp )
-    :name: VIDIOC_S_EXT_CTRLS
-
-
-.. c:function:: int ioctl( int fd, VIDIOC_TRY_EXT_CTRLS, struct v4l2_ext_controls *argp )
-    :name: VIDIOC_TRY_EXT_CTRLS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_ext_controls`.
-
-
-Description
-===========
-
-These ioctls allow the caller to get or set multiple controls
-atomically. Control IDs are grouped into control classes (see
-:ref:`ctrl-class`) and all controls in the control array must belong
-to the same control class.
-
-Applications must always fill in the ``count``, ``which``, ``controls``
-and ``reserved`` fields of struct
-:c:type:`v4l2_ext_controls`, and initialize the
-struct :c:type:`v4l2_ext_control` array pointed to
-by the ``controls`` fields.
-
-To get the current value of a set of controls applications initialize
-the ``id``, ``size`` and ``reserved2`` fields of each struct
-:c:type:`v4l2_ext_control` and call the
-:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctl. String controls controls must also set the
-``string`` field. Controls of compound types
-(``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is set) must set the ``ptr`` field.
-
-If the ``size`` is too small to receive the control result (only
-relevant for pointer-type controls like strings), then the driver will
-set ``size`` to a valid value and return an ``ENOSPC`` error code. You
-should re-allocate the memory to this new size and try again. For the
-string type it is possible that the same issue occurs again if the
-string has grown in the meantime. It is recommended to call
-:ref:`VIDIOC_QUERYCTRL` first and use
-``maximum``\ +1 as the new ``size`` value. It is guaranteed that that is
-sufficient memory.
-
-N-dimensional arrays are set and retrieved row-by-row. You cannot set a
-partial array, all elements have to be set or retrieved. The total size
-is calculated as ``elems`` * ``elem_size``. These values can be obtained
-by calling :ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>`.
-
-To change the value of a set of controls applications initialize the
-``id``, ``size``, ``reserved2`` and ``value/value64/string/ptr`` fields
-of each struct :c:type:`v4l2_ext_control` and call
-the :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctl. The controls will only be set if *all*
-control values are valid.
-
-To check if a set of controls have correct values applications
-initialize the ``id``, ``size``, ``reserved2`` and
-``value/value64/string/ptr`` fields of each struct
-:c:type:`v4l2_ext_control` and call the
-:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctl. It is up to the driver whether wrong
-values are automatically adjusted to a valid value or if an error is
-returned.
-
-When the ``id`` or ``which`` is invalid drivers return an ``EINVAL`` error
-code. When the value is out of bounds drivers can choose to take the
-closest valid value or return an ``ERANGE`` error code, whatever seems more
-appropriate. In the first case the new value is set in struct
-:c:type:`v4l2_ext_control`. If the new control value
-is inappropriate (e.g. the given menu index is not supported by the menu
-control), then this will also result in an ``EINVAL`` error code error.
-
-If ``request_fd`` is set to a not-yet-queued :ref:`request <media-request-api>`
-file descriptor and ``which`` is set to ``V4L2_CTRL_WHICH_REQUEST_VAL``,
-then the controls are not applied immediately when calling
-:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, but instead are applied by
-the driver for the buffer associated with the same request.
-If the device does not support requests, then ``EACCES`` will be returned.
-If requests are supported but an invalid request file descriptor is given,
-then ``EINVAL`` will be returned.
-
-An attempt to call :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` for a
-request that has already been queued will result in an ``EBUSY`` error.
-
-If ``request_fd`` is specified and ``which`` is set to
-``V4L2_CTRL_WHICH_REQUEST_VAL`` during a call to
-:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, then it will return the
-values of the controls at the time of request completion.
-If the request is not yet completed, then this will result in an
-``EACCES`` error.
-
-The driver will only set/get these controls if all control values are
-correct. This prevents the situation where only some of the controls
-were set/get. Only low-level errors (e. g. a failed i2c command) can
-still cause this situation.
-
-
-.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{1.5cm}|p{11.8cm}|
-
-.. c:type:: v4l2_ext_control
-
-.. cssclass: longtable
-
-.. flat-table:: struct v4l2_ext_control
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``id``
-      - Identifies the control, set by the application.
-    * - __u32
-      - ``size``
-      - The total size in bytes of the payload of this control. This is
-	normally 0, but for pointer controls this should be set to the
-	size of the memory containing the payload, or that will receive
-	the payload. If :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` finds that this value is
-	less than is required to store the payload result, then it is set
-	to a value large enough to store the payload result and ``ENOSPC`` is
-	returned.
-
-	.. note::
-
-	   For string controls, this ``size`` field should
-	   not be confused with the length of the string. This field refers
-	   to the size of the memory that contains the string. The actual
-	   *length* of the string may well be much smaller.
-    * - __u32
-      - ``reserved2``\ [1]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-    * - union {
-      - (anonymous)
-    * - __s32
-      - ``value``
-      - New value or current value. Valid if this control is not of type
-	``V4L2_CTRL_TYPE_INTEGER64`` and ``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is
-	not set.
-    * - __s64
-      - ``value64``
-      - New value or current value. Valid if this control is of type
-	``V4L2_CTRL_TYPE_INTEGER64`` and ``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is
-	not set.
-    * - char *
-      - ``string``
-      - A pointer to a string. Valid if this control is of type
-	``V4L2_CTRL_TYPE_STRING``.
-    * - __u8 *
-      - ``p_u8``
-      - A pointer to a matrix control of unsigned 8-bit values. Valid if
-	this control is of type ``V4L2_CTRL_TYPE_U8``.
-    * - __u16 *
-      - ``p_u16``
-      - A pointer to a matrix control of unsigned 16-bit values. Valid if
-	this control is of type ``V4L2_CTRL_TYPE_U16``.
-    * - __u32 *
-      - ``p_u32``
-      - A pointer to a matrix control of unsigned 32-bit values. Valid if
-	this control is of type ``V4L2_CTRL_TYPE_U32``.
-    * - :c:type:`v4l2_area` *
-      - ``p_area``
-      - A pointer to a struct :c:type:`v4l2_area`. Valid if this control is
-        of type ``V4L2_CTRL_TYPE_AREA``.
-    * - void *
-      - ``ptr``
-      - A pointer to a compound type which can be an N-dimensional array
-	and/or a compound type (the control's type is >=
-	``V4L2_CTRL_COMPOUND_TYPES``). Valid if
-	``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is set for this control.
-    * - }
-      -
-
-
-.. tabularcolumns:: |p{4.0cm}|p{2.2cm}|p{2.1cm}|p{8.2cm}|
-
-.. c:type:: v4l2_ext_controls
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ext_controls
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - union {
-      - (anonymous)
-    * - __u32
-      - ``ctrl_class``
-      - The control class to which all controls belong, see
-	:ref:`ctrl-class`. Drivers that use a kernel framework for
-	handling controls will also accept a value of 0 here, meaning that
-	the controls can belong to any control class. Whether drivers
-	support this can be tested by setting ``ctrl_class`` to 0 and
-	calling :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` with a ``count`` of 0. If that
-	succeeds, then the driver supports this feature.
-    * - __u32
-      - ``which``
-      - Which value of the control to get/set/try.
-	``V4L2_CTRL_WHICH_CUR_VAL`` will return the current value of the
-	control, ``V4L2_CTRL_WHICH_DEF_VAL`` will return the default
-	value of the control and ``V4L2_CTRL_WHICH_REQUEST_VAL`` indicates that
-	these controls have to be retrieved from a request or tried/set for
-	a request. In the latter case the ``request_fd`` field contains the
-	file descriptor of the request that should be used. If the device
-	does not support requests, then ``EACCES`` will be returned.
-
-	.. note::
-
-	   When using ``V4L2_CTRL_WHICH_DEF_VAL`` be aware that you can only
-	   get the default value of the control, you cannot set or try it.
-
-	For backwards compatibility you can also use a control class here
-	(see :ref:`ctrl-class`). In that case all controls have to
-	belong to that control class. This usage is deprecated, instead
-	just use ``V4L2_CTRL_WHICH_CUR_VAL``. There are some very old
-	drivers that do not yet support ``V4L2_CTRL_WHICH_CUR_VAL`` and
-	that require a control class here. You can test for such drivers
-	by setting ctrl_class to ``V4L2_CTRL_WHICH_CUR_VAL`` and calling
-	VIDIOC_TRY_EXT_CTRLS with a count of 0. If that fails, then the
-	driver does not support ``V4L2_CTRL_WHICH_CUR_VAL``.
-    * - }
-      -
-    * - __u32
-      - ``count``
-      - The number of controls in the controls array. May also be zero.
-    * - __u32
-      - ``error_idx``
-      - Set by the driver in case of an error. If the error is associated
-	with a particular control, then ``error_idx`` is set to the index
-	of that control. If the error is not related to a specific
-	control, or the validation step failed (see below), then
-	``error_idx`` is set to ``count``. The value is undefined if the
-	ioctl returned 0 (success).
-
-	Before controls are read from/written to hardware a validation
-	step takes place: this checks if all controls in the list are
-	valid controls, if no attempt is made to write to a read-only
-	control or read from a write-only control, and any other up-front
-	checks that can be done without accessing the hardware. The exact
-	validations done during this step are driver dependent since some
-	checks might require hardware access for some devices, thus making
-	it impossible to do those checks up-front. However, drivers should
-	make a best-effort to do as many up-front checks as possible.
-
-	This check is done to avoid leaving the hardware in an
-	inconsistent state due to easy-to-avoid problems. But it leads to
-	another problem: the application needs to know whether an error
-	came from the validation step (meaning that the hardware was not
-	touched) or from an error during the actual reading from/writing
-	to hardware.
-
-	The, in hindsight quite poor, solution for that is to set
-	``error_idx`` to ``count`` if the validation failed. This has the
-	unfortunate side-effect that it is not possible to see which
-	control failed the validation. If the validation was successful
-	and the error happened while accessing the hardware, then
-	``error_idx`` is less than ``count`` and only the controls up to
-	``error_idx-1`` were read or written correctly, and the state of
-	the remaining controls is undefined.
-
-	Since :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` does not access hardware there is
-	also no need to handle the validation step in this special way, so
-	``error_idx`` will just be set to the control that failed the
-	validation step instead of to ``count``. This means that if
-	:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` fails with ``error_idx`` set to ``count``,
-	then you can call :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` to try to discover the
-	actual control that failed the validation step. Unfortunately,
-	there is no ``TRY`` equivalent for :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`.
-    * - __s32
-      - ``request_fd``
-      - File descriptor of the request to be used by this operation. Only
-	valid if ``which`` is set to ``V4L2_CTRL_WHICH_REQUEST_VAL``.
-	If the device does not support requests, then ``EACCES`` will be returned.
-	If requests are supported but an invalid request file descriptor is
-	given, then ``EINVAL`` will be returned.
-    * - __u32
-      - ``reserved``\ [1]
-      - Reserved for future extensions.
-
-	Drivers and applications must set the array to zero.
-    * - struct :c:type:`v4l2_ext_control` *
-      - ``controls``
-      - Pointer to an array of ``count`` v4l2_ext_control structures.
-
-	Ignored if ``count`` equals zero.
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _ctrl-class:
-
-.. flat-table:: Control classes
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_CTRL_CLASS_USER``
-      - 0x980000
-      - The class containing user controls. These controls are described
-	in :ref:`control`. All controls that can be set using the
-	:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` and
-	:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` ioctl belong to this
-	class.
-    * - ``V4L2_CTRL_CLASS_MPEG``
-      - 0x990000
-      - The class containing MPEG compression controls. These controls are
-	described in :ref:`mpeg-controls`.
-    * - ``V4L2_CTRL_CLASS_CAMERA``
-      - 0x9a0000
-      - The class containing camera controls. These controls are described
-	in :ref:`camera-controls`.
-    * - ``V4L2_CTRL_CLASS_FM_TX``
-      - 0x9b0000
-      - The class containing FM Transmitter (FM TX) controls. These
-	controls are described in :ref:`fm-tx-controls`.
-    * - ``V4L2_CTRL_CLASS_FLASH``
-      - 0x9c0000
-      - The class containing flash device controls. These controls are
-	described in :ref:`flash-controls`.
-    * - ``V4L2_CTRL_CLASS_JPEG``
-      - 0x9d0000
-      - The class containing JPEG compression controls. These controls are
-	described in :ref:`jpeg-controls`.
-    * - ``V4L2_CTRL_CLASS_IMAGE_SOURCE``
-      - 0x9e0000
-      - The class containing image source controls. These controls are
-	described in :ref:`image-source-controls`.
-    * - ``V4L2_CTRL_CLASS_IMAGE_PROC``
-      - 0x9f0000
-      - The class containing image processing controls. These controls are
-	described in :ref:`image-process-controls`.
-    * - ``V4L2_CTRL_CLASS_FM_RX``
-      - 0xa10000
-      - The class containing FM Receiver (FM RX) controls. These controls
-	are described in :ref:`fm-rx-controls`.
-    * - ``V4L2_CTRL_CLASS_RF_TUNER``
-      - 0xa20000
-      - The class containing RF tuner controls. These controls are
-	described in :ref:`rf-tuner-controls`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_ext_control` ``id`` is
-    invalid, or the struct :c:type:`v4l2_ext_controls`
-    ``which`` is invalid, or the struct
-    :c:type:`v4l2_ext_control` ``value`` was
-    inappropriate (e.g. the given menu index is not supported by the
-    driver), or the ``which`` field was set to ``V4L2_CTRL_WHICH_REQUEST_VAL``
-    but the given ``request_fd`` was invalid or ``V4L2_CTRL_WHICH_REQUEST_VAL``
-    is not supported by the kernel.
-    This error code is also returned by the
-    :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctls if two or
-    more control values are in conflict.
-
-ERANGE
-    The struct :c:type:`v4l2_ext_control` ``value``
-    is out of bounds.
-
-EBUSY
-    The control is temporarily not changeable, possibly because another
-    applications took over control of the device function this control
-    belongs to, or (if the ``which`` field was set to
-    ``V4L2_CTRL_WHICH_REQUEST_VAL``) the request was queued but not yet
-    completed.
-
-ENOSPC
-    The space reserved for the control's payload is insufficient. The
-    field ``size`` is set to a value that is enough to store the payload
-    and this error code is returned.
-
-EACCES
-    Attempt to try or set a read-only control, or to get a write-only
-    control, or to get a control from a request that has not yet been
-    completed.
-
-    Or the ``which`` field was set to ``V4L2_CTRL_WHICH_REQUEST_VAL`` but the
-    device does not support requests.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst b/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst
deleted file mode 100644
index 2d197e6bba8f..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst
+++ /dev/null
@@ -1,362 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_FBUF:
-
-**********************************
-ioctl VIDIOC_G_FBUF, VIDIOC_S_FBUF
-**********************************
-
-Name
-====
-
-VIDIOC_G_FBUF - VIDIOC_S_FBUF - Get or set frame buffer overlay parameters
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_FBUF, struct v4l2_framebuffer *argp )
-    :name: VIDIOC_G_FBUF
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_FBUF, const struct v4l2_framebuffer *argp )
-    :name: VIDIOC_S_FBUF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_framebuffer`.
-
-
-Description
-===========
-
-Applications can use the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` and :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctl
-to get and set the framebuffer parameters for a
-:ref:`Video Overlay <overlay>` or :ref:`Video Output Overlay <osd>`
-(OSD). The type of overlay is implied by the device type (capture or
-output device) and can be determined with the
-:ref:`VIDIOC_QUERYCAP` ioctl. One ``/dev/videoN``
-device must not support both kinds of overlay.
-
-The V4L2 API distinguishes destructive and non-destructive overlays. A
-destructive overlay copies captured video images into the video memory
-of a graphics card. A non-destructive overlay blends video images into a
-VGA signal or graphics into a video signal. *Video Output Overlays* are
-always non-destructive.
-
-To get the current parameters applications call the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`
-ioctl with a pointer to a struct :c:type:`v4l2_framebuffer`
-structure. The driver fills all fields of the structure or returns an
-EINVAL error code when overlays are not supported.
-
-To set the parameters for a *Video Output Overlay*, applications must
-initialize the ``flags`` field of a struct
-:c:type:`v4l2_framebuffer`. Since the framebuffer is
-implemented on the TV card all other parameters are determined by the
-driver. When an application calls :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` with a pointer to
-this structure, the driver prepares for the overlay and returns the
-framebuffer parameters as :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` does, or it returns an error
-code.
-
-To set the parameters for a *non-destructive Video Overlay*,
-applications must initialize the ``flags`` field, the ``fmt``
-substructure, and call :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`. Again the driver prepares for
-the overlay and returns the framebuffer parameters as :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`
-does, or it returns an error code.
-
-For a *destructive Video Overlay* applications must additionally provide
-a ``base`` address. Setting up a DMA to a random memory location can
-jeopardize the system security, its stability or even damage the
-hardware, therefore only the superuser can set the parameters for a
-destructive video overlay.
-
-
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
-
-.. c:type:: v4l2_framebuffer
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_framebuffer
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 1 2
-
-    * - __u32
-      - ``capability``
-      -
-      - Overlay capability flags set by the driver, see
-	:ref:`framebuffer-cap`.
-    * - __u32
-      - ``flags``
-      -
-      - Overlay control flags set by application and driver, see
-	:ref:`framebuffer-flags`
-    * - void *
-      - ``base``
-      -
-      - Physical base address of the framebuffer, that is the address of
-	the pixel in the top left corner of the framebuffer. [#f1]_
-    * -
-      -
-      -
-      - This field is irrelevant to *non-destructive Video Overlays*. For
-	*destructive Video Overlays* applications must provide a base
-	address. The driver may accept only base addresses which are a
-	multiple of two, four or eight bytes. For *Video Output Overlays*
-	the driver must return a valid base address, so applications can
-	find the corresponding Linux framebuffer device (see
-	:ref:`osd`).
-    * - struct
-      - ``fmt``
-      -
-      - Layout of the frame buffer.
-    * -
-      - __u32
-      - ``width``
-      - Width of the frame buffer in pixels.
-    * -
-      - __u32
-      - ``height``
-      - Height of the frame buffer in pixels.
-    * -
-      - __u32
-      - ``pixelformat``
-      - The pixel format of the framebuffer.
-    * -
-      -
-      -
-      - For *non-destructive Video Overlays* this field only defines a
-	format for the struct :c:type:`v4l2_window`
-	``chromakey`` field.
-    * -
-      -
-      -
-      - For *destructive Video Overlays* applications must initialize this
-	field. For *Video Output Overlays* the driver must return a valid
-	format.
-    * -
-      -
-      -
-      - Usually this is an RGB format (for example
-	:ref:`V4L2_PIX_FMT_RGB565 <V4L2-PIX-FMT-RGB565>`) but YUV
-	formats (only packed YUV formats when chroma keying is used, not
-	including ``V4L2_PIX_FMT_YUYV`` and ``V4L2_PIX_FMT_UYVY``) and the
-	``V4L2_PIX_FMT_PAL8`` format are also permitted. The behavior of
-	the driver when an application requests a compressed format is
-	undefined. See :ref:`pixfmt` for information on pixel formats.
-    * -
-      - enum :c:type:`v4l2_field`
-      - ``field``
-      - Drivers and applications shall ignore this field. If applicable,
-	the field order is selected with the
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, using the ``field``
-	field of struct :c:type:`v4l2_window`.
-    * -
-      - __u32
-      - ``bytesperline``
-      - Distance in bytes between the leftmost pixels in two adjacent
-	lines.
-    * - :cspan:`3`
-
-	This field is irrelevant to *non-destructive Video Overlays*.
-
-	For *destructive Video Overlays* both applications and drivers can
-	set this field to request padding bytes at the end of each line.
-	Drivers however may ignore the requested value, returning
-	``width`` times bytes-per-pixel or a larger value required by the
-	hardware. That implies applications can just set this field to
-	zero to get a reasonable default.
-
-	For *Video Output Overlays* the driver must return a valid value.
-
-	Video hardware may access padding bytes, therefore they must
-	reside in accessible memory. Consider for example the case where
-	padding bytes after the last line of an image cross a system page
-	boundary. Capture devices may write padding bytes, the value is
-	undefined. Output devices ignore the contents of padding bytes.
-
-	When the image format is planar the ``bytesperline`` value applies
-	to the first plane and is divided by the same factor as the
-	``width`` field for the other planes. For example the Cb and Cr
-	planes of a YUV 4:2:0 image have half as many padding bytes
-	following each line as the Y plane. To avoid ambiguities drivers
-	must return a ``bytesperline`` value rounded up to a multiple of
-	the scale factor.
-    * -
-      - __u32
-      - ``sizeimage``
-      - This field is irrelevant to *non-destructive Video Overlays*. For
-	*destructive Video Overlays* applications must initialize this
-	field. For *Video Output Overlays* the driver must return a valid
-	format.
-
-	Together with ``base`` it defines the framebuffer memory
-	accessible by the driver.
-    * -
-      - enum :c:type:`v4l2_colorspace`
-      - ``colorspace``
-      - This information supplements the ``pixelformat`` and must be set
-	by the driver, see :ref:`colorspaces`.
-    * -
-      - __u32
-      - ``priv``
-      - Reserved. Drivers and applications must set this field to zero.
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _framebuffer-cap:
-
-.. flat-table:: Frame Buffer Capability Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_FBUF_CAP_EXTERNOVERLAY``
-      - 0x0001
-      - The device is capable of non-destructive overlays. When the driver
-	clears this flag, only destructive overlays are supported. There
-	are no drivers yet which support both destructive and
-	non-destructive overlays. Video Output Overlays are in practice
-	always non-destructive.
-    * - ``V4L2_FBUF_CAP_CHROMAKEY``
-      - 0x0002
-      - The device supports clipping by chroma-keying the images. That is,
-	image pixels replace pixels in the VGA or video signal only where
-	the latter assume a certain color. Chroma-keying makes no sense
-	for destructive overlays.
-    * - ``V4L2_FBUF_CAP_LIST_CLIPPING``
-      - 0x0004
-      - The device supports clipping using a list of clip rectangles.
-    * - ``V4L2_FBUF_CAP_BITMAP_CLIPPING``
-      - 0x0008
-      - The device supports clipping using a bit mask.
-    * - ``V4L2_FBUF_CAP_LOCAL_ALPHA``
-      - 0x0010
-      - The device supports clipping/blending using the alpha channel of
-	the framebuffer or VGA signal. Alpha blending makes no sense for
-	destructive overlays.
-    * - ``V4L2_FBUF_CAP_GLOBAL_ALPHA``
-      - 0x0020
-      - The device supports alpha blending using a global alpha value.
-	Alpha blending makes no sense for destructive overlays.
-    * - ``V4L2_FBUF_CAP_LOCAL_INV_ALPHA``
-      - 0x0040
-      - The device supports clipping/blending using the inverted alpha
-	channel of the framebuffer or VGA signal. Alpha blending makes no
-	sense for destructive overlays.
-    * - ``V4L2_FBUF_CAP_SRC_CHROMAKEY``
-      - 0x0080
-      - The device supports Source Chroma-keying. Video pixels with the
-	chroma-key colors are replaced by framebuffer pixels, which is
-	exactly opposite of ``V4L2_FBUF_CAP_CHROMAKEY``
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _framebuffer-flags:
-
-.. cssclass:: longtable
-
-.. flat-table:: Frame Buffer Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_FBUF_FLAG_PRIMARY``
-      - 0x0001
-      - The framebuffer is the primary graphics surface. In other words,
-	the overlay is destructive. This flag is typically set by any
-	driver that doesn't have the ``V4L2_FBUF_CAP_EXTERNOVERLAY``
-	capability and it is cleared otherwise.
-    * - ``V4L2_FBUF_FLAG_OVERLAY``
-      - 0x0002
-      - If this flag is set for a video capture device, then the driver
-	will set the initial overlay size to cover the full framebuffer
-	size, otherwise the existing overlay size (as set by
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`) will be used. Only one
-	video capture driver (bttv) supports this flag. The use of this
-	flag for capture devices is deprecated. There is no way to detect
-	which drivers support this flag, so the only reliable method of
-	setting the overlay size is through
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`. If this flag is set for a
-	video output device, then the video output overlay window is
-	relative to the top-left corner of the framebuffer and restricted
-	to the size of the framebuffer. If it is cleared, then the video
-	output overlay window is relative to the video output display.
-    * - ``V4L2_FBUF_FLAG_CHROMAKEY``
-      - 0x0004
-      - Use chroma-keying. The chroma-key color is determined by the
-	``chromakey`` field of struct :c:type:`v4l2_window`
-	and negotiated with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
-	ioctl, see :ref:`overlay` and :ref:`osd`.
-    * - :cspan:`2` There are no flags to enable clipping using a list of
-	clip rectangles or a bitmap. These methods are negotiated with the
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, see :ref:`overlay`
-	and :ref:`osd`.
-    * - ``V4L2_FBUF_FLAG_LOCAL_ALPHA``
-      - 0x0008
-      - Use the alpha channel of the framebuffer to clip or blend
-	framebuffer pixels with video images. The blend function is:
-	output = framebuffer pixel * alpha + video pixel * (1 - alpha).
-	The actual alpha depth depends on the framebuffer pixel format.
-    * - ``V4L2_FBUF_FLAG_GLOBAL_ALPHA``
-      - 0x0010
-      - Use a global alpha value to blend the framebuffer with video
-	images. The blend function is: output = (framebuffer pixel * alpha
-	+ video pixel * (255 - alpha)) / 255. The alpha value is
-	determined by the ``global_alpha`` field of struct
-	:c:type:`v4l2_window` and negotiated with the
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, see :ref:`overlay`
-	and :ref:`osd`.
-    * - ``V4L2_FBUF_FLAG_LOCAL_INV_ALPHA``
-      - 0x0020
-      - Like ``V4L2_FBUF_FLAG_LOCAL_ALPHA``, use the alpha channel of the
-	framebuffer to clip or blend framebuffer pixels with video images,
-	but with an inverted alpha value. The blend function is: output =
-	framebuffer pixel * (1 - alpha) + video pixel * alpha. The actual
-	alpha depth depends on the framebuffer pixel format.
-    * - ``V4L2_FBUF_FLAG_SRC_CHROMAKEY``
-      - 0x0040
-      - Use source chroma-keying. The source chroma-key color is
-	determined by the ``chromakey`` field of struct
-	:c:type:`v4l2_window` and negotiated with the
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, see :ref:`overlay`
-	and :ref:`osd`. Both chroma-keying are mutual exclusive to each
-	other, so same ``chromakey`` field of struct
-	:c:type:`v4l2_window` is being used.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EPERM
-    :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` can only be called by a privileged user to
-    negotiate the parameters for a destructive overlay.
-
-EINVAL
-    The :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` parameters are unsuitable.
-
-.. [#f1]
-   A physical base address may not suit all platforms. GK notes in
-   theory we should pass something like PCI device + memory region +
-   offset instead. If you encounter problems please discuss on the
-   linux-media mailing list:
-   `https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
deleted file mode 100644
index 1e69bfc46e8d..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
+++ /dev/null
@@ -1,161 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_FMT:
-
-************************************************
-ioctl VIDIOC_G_FMT, VIDIOC_S_FMT, VIDIOC_TRY_FMT
-************************************************
-
-Name
-====
-
-VIDIOC_G_FMT - VIDIOC_S_FMT - VIDIOC_TRY_FMT - Get or set the data format, try a format
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_FMT, struct v4l2_format *argp )
-    :name: VIDIOC_G_FMT
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_FMT, struct v4l2_format *argp )
-    :name: VIDIOC_S_FMT
-
-.. c:function:: int ioctl( int fd, VIDIOC_TRY_FMT, struct v4l2_format *argp )
-    :name: VIDIOC_TRY_FMT
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_format`.
-
-
-Description
-===========
-
-These ioctls are used to negotiate the format of data (typically image
-format) exchanged between driver and application.
-
-To query the current parameters applications set the ``type`` field of a
-struct :c:type:`v4l2_format` to the respective buffer (stream)
-type. For example video capture devices use
-``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or
-``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``. When the application calls the
-:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl with a pointer to this structure the driver fills
-the respective member of the ``fmt`` union. In case of video capture
-devices that is either the struct
-:c:type:`v4l2_pix_format` ``pix`` or the struct
-:c:type:`v4l2_pix_format_mplane` ``pix_mp``
-member. When the requested buffer type is not supported drivers return
-an ``EINVAL`` error code.
-
-To change the current format parameters applications initialize the
-``type`` field and all fields of the respective ``fmt`` union member.
-For details see the documentation of the various devices types in
-:ref:`devices`. Good practice is to query the current parameters
-first, and to modify only those parameters not suitable for the
-application. When the application calls the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with
-a pointer to a struct :c:type:`v4l2_format` structure the driver
-checks and adjusts the parameters against hardware abilities. Drivers
-should not return an error code unless the ``type`` field is invalid,
-this is a mechanism to fathom device capabilities and to approach
-parameters acceptable for both the application and driver. On success
-the driver may program the hardware, allocate resources and generally
-prepare for data exchange. Finally the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl returns
-the current format parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does. Very simple,
-inflexible devices may even ignore all input and always return the
-default parameters. However all V4L2 devices exchanging data with the
-application must implement the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
-ioctl. When the requested buffer type is not supported drivers return an
-EINVAL error code on a :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` attempt. When I/O is already in
-progress or the resource is not available for other reasons drivers
-return the ``EBUSY`` error code.
-
-The :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl is equivalent to :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` with one
-exception: it does not change driver state. It can also be called at any
-time, never returning ``EBUSY``. This function is provided to negotiate
-parameters, to learn about hardware limitations, without disabling I/O
-or possibly time consuming hardware preparations. Although strongly
-recommended drivers are not required to implement this ioctl.
-
-The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical to what
-:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` returns for the same input or output.
-
-
-.. c:type:: v4l2_format
-
-.. tabularcolumns::  |p{1.2cm}|p{4.6cm}|p{3.0cm}|p{8.6cm}|
-
-.. flat-table:: struct v4l2_format
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - __u32
-      - ``type``
-      - Type of the data stream, see :c:type:`v4l2_buf_type`.
-    * - union {
-      - ``fmt``
-    * - struct :c:type:`v4l2_pix_format`
-      - ``pix``
-      - Definition of an image format, see :ref:`pixfmt`, used by video
-	capture and output devices.
-    * - struct :c:type:`v4l2_pix_format_mplane`
-      - ``pix_mp``
-      - Definition of an image format, see :ref:`pixfmt`, used by video
-	capture and output devices that support the
-	:ref:`multi-planar version of the API <planar-apis>`.
-    * - struct :c:type:`v4l2_window`
-      - ``win``
-      - Definition of an overlaid image, see :ref:`overlay`, used by
-	video overlay devices.
-    * - struct :c:type:`v4l2_vbi_format`
-      - ``vbi``
-      - Raw VBI capture or output parameters. This is discussed in more
-	detail in :ref:`raw-vbi`. Used by raw VBI capture and output
-	devices.
-    * - struct :c:type:`v4l2_sliced_vbi_format`
-      - ``sliced``
-      - Sliced VBI capture or output parameters. See :ref:`sliced` for
-	details. Used by sliced VBI capture and output devices.
-    * - struct :c:type:`v4l2_sdr_format`
-      - ``sdr``
-      - Definition of a data format, see :ref:`pixfmt`, used by SDR
-	capture and output devices.
-    * - struct :c:type:`v4l2_meta_format`
-      - ``meta``
-      - Definition of a metadata format, see :ref:`meta-formats`, used by
-	metadata capture devices.
-    * - __u8
-      - ``raw_data``\ [200]
-      - Place holder for future extensions.
-    * - }
-      -
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_format` ``type`` field is
-    invalid or the requested buffer type not supported.
-
-EBUSY
-    The device is busy and cannot change the format. This could be
-    because or the device is streaming or buffers are allocated or
-    queued to the driver. Relevant for :ref:`VIDIOC_S_FMT
-    <VIDIOC_G_FMT>` only.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst b/Documentation/media/uapi/v4l/vidioc-g-frequency.rst
deleted file mode 100644
index cc30bae3dd6e..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst
+++ /dev/null
@@ -1,112 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_FREQUENCY:
-
-********************************************
-ioctl VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY
-********************************************
-
-Name
-====
-
-VIDIOC_G_FREQUENCY - VIDIOC_S_FREQUENCY - Get or set tuner or modulator radio frequency
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_FREQUENCY, struct v4l2_frequency *argp )
-    :name: VIDIOC_G_FREQUENCY
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_FREQUENCY, const struct v4l2_frequency *argp )
-    :name: VIDIOC_S_FREQUENCY
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_frequency`.
-
-
-Description
-===========
-
-To get the current tuner or modulator radio frequency applications set
-the ``tuner`` field of a struct
-:c:type:`v4l2_frequency` to the respective tuner or
-modulator number (only input devices have tuners, only output devices
-have modulators), zero out the ``reserved`` array and call the
-:ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl with a pointer to this structure. The
-driver stores the current frequency in the ``frequency`` field.
-
-To change the current tuner or modulator radio frequency applications
-initialize the ``tuner``, ``type`` and ``frequency`` fields, and the
-``reserved`` array of a struct :c:type:`v4l2_frequency`
-and call the :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl with a pointer to this
-structure. When the requested frequency is not possible the driver
-assumes the closest possible value. However :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` is a
-write-only ioctl, it does not return the actual new frequency.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_frequency
-
-.. flat-table:: struct v4l2_frequency
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``tuner``
-      - The tuner or modulator index number. This is the same value as in
-	the struct :c:type:`v4l2_input` ``tuner`` field and
-	the struct :c:type:`v4l2_tuner` ``index`` field, or
-	the struct :c:type:`v4l2_output` ``modulator`` field
-	and the struct :c:type:`v4l2_modulator` ``index``
-	field.
-    * - __u32
-      - ``type``
-      - The tuner type. This is the same value as in the struct
-	:c:type:`v4l2_tuner` ``type`` field. The type must be
-	set to ``V4L2_TUNER_RADIO`` for ``/dev/radioX`` device nodes, and
-	to ``V4L2_TUNER_ANALOG_TV`` for all others. Set this field to
-	``V4L2_TUNER_RADIO`` for modulators (currently only radio
-	modulators are supported). See :c:type:`v4l2_tuner_type`
-    * - __u32
-      - ``frequency``
-      - Tuning frequency in units of 62.5 kHz, or if the struct
-	:c:type:`v4l2_tuner` or struct
-	:c:type:`v4l2_modulator` ``capability`` flag
-	``V4L2_TUNER_CAP_LOW`` is set, in units of 62.5 Hz. A 1 Hz unit is
-	used when the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is set.
-    * - __u32
-      - ``reserved``\ [8]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The ``tuner`` index is out of bounds or the value in the ``type``
-    field is wrong.
-
-EBUSY
-    A hardware seek is in progress.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-input.rst b/Documentation/media/uapi/v4l/vidioc-g-input.rst
deleted file mode 100644
index 76b7d487466e..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-input.rst
+++ /dev/null
@@ -1,71 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_INPUT:
-
-************************************
-ioctl VIDIOC_G_INPUT, VIDIOC_S_INPUT
-************************************
-
-Name
-====
-
-VIDIOC_G_INPUT - VIDIOC_S_INPUT - Query or select the current video input
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_INPUT, int *argp )
-    :name: VIDIOC_G_INPUT
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_INPUT, int *argp )
-    :name: VIDIOC_S_INPUT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer an integer with input index.
-
-
-Description
-===========
-
-To query the current video input applications call the
-:ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` ioctl with a pointer to an integer where the driver
-stores the number of the input, as in the struct
-:c:type:`v4l2_input` ``index`` field. This ioctl will fail
-only when there are no video inputs, returning ``EINVAL``.
-
-To select a video input applications store the number of the desired
-input in an integer and call the :ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` ioctl with a pointer
-to this integer. Side effects are possible. For example inputs may
-support different video standards, so the driver may implicitly switch
-the current standard. Because of these possible side effects
-applications must select an input before querying or negotiating any
-other parameters.
-
-Information about video inputs is available using the
-:ref:`VIDIOC_ENUMINPUT` ioctl.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The number of the video input is out of bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst b/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst
deleted file mode 100644
index 5480277ab327..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst
+++ /dev/null
@@ -1,134 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_JPEGCOMP:
-
-******************************************
-ioctl VIDIOC_G_JPEGCOMP, VIDIOC_S_JPEGCOMP
-******************************************
-
-Name
-====
-
-VIDIOC_G_JPEGCOMP - VIDIOC_S_JPEGCOMP
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_JPEGCOMP, v4l2_jpegcompression *argp )
-    :name: VIDIOC_G_JPEGCOMP
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_JPEGCOMP, const v4l2_jpegcompression *argp )
-    :name: VIDIOC_S_JPEGCOMP
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_jpegcompression`.
-
-
-Description
-===========
-
-These ioctls are **deprecated**. New drivers and applications should use
-:ref:`JPEG class controls <jpeg-controls>` for image quality and JPEG
-markers control.
-
-[to do]
-
-Ronald Bultje elaborates:
-
-APP is some application-specific information. The application can set it
-itself, and it'll be stored in the JPEG-encoded fields (eg; interlacing
-information for in an AVI or so). COM is the same, but it's comments,
-like 'encoded by me' or so.
-
-jpeg_markers describes whether the huffman tables, quantization tables
-and the restart interval information (all JPEG-specific stuff) should be
-stored in the JPEG-encoded fields. These define how the JPEG field is
-encoded. If you omit them, applications assume you've used standard
-encoding. You usually do want to add them.
-
-
-.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}|
-
-.. c:type:: v4l2_jpegcompression
-
-.. flat-table:: struct v4l2_jpegcompression
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - int
-      - ``quality``
-      - Deprecated. If
-	:ref:`V4L2_CID_JPEG_COMPRESSION_QUALITY <jpeg-quality-control>`
-	control is exposed by a driver applications should use it instead
-	and ignore this field.
-    * - int
-      - ``APPn``
-      -
-    * - int
-      - ``APP_len``
-      -
-    * - char
-      - ``APP_data``\ [60]
-      -
-    * - int
-      - ``COM_len``
-      -
-    * - char
-      - ``COM_data``\ [60]
-      -
-    * - __u32
-      - ``jpeg_markers``
-      - See :ref:`jpeg-markers`. Deprecated. If
-	:ref:`V4L2_CID_JPEG_ACTIVE_MARKER <jpeg-active-marker-control>`
-	control is exposed by a driver applications should use it instead
-	and ignore this field.
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _jpeg-markers:
-
-.. flat-table:: JPEG Markers Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_JPEG_MARKER_DHT``
-      - (1<<3)
-      - Define Huffman Tables
-    * - ``V4L2_JPEG_MARKER_DQT``
-      - (1<<4)
-      - Define Quantization Tables
-    * - ``V4L2_JPEG_MARKER_DRI``
-      - (1<<5)
-      - Define Restart Interval
-    * - ``V4L2_JPEG_MARKER_COM``
-      - (1<<6)
-      - Comment segment
-    * - ``V4L2_JPEG_MARKER_APP``
-      - (1<<7)
-      - App segment, driver will always use APP0
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst b/Documentation/media/uapi/v4l/vidioc-g-modulator.rst
deleted file mode 100644
index 2c33a8bdcc47..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst
+++ /dev/null
@@ -1,202 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_MODULATOR:
-
-********************************************
-ioctl VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR
-********************************************
-
-Name
-====
-
-VIDIOC_G_MODULATOR - VIDIOC_S_MODULATOR - Get or set modulator attributes
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_MODULATOR, struct v4l2_modulator *argp )
-    :name: VIDIOC_G_MODULATOR
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_MODULATOR, const struct v4l2_modulator *argp )
-    :name: VIDIOC_S_MODULATOR
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_modulator`.
-
-
-Description
-===========
-
-To query the attributes of a modulator applications initialize the
-``index`` field and zero out the ``reserved`` array of a struct
-:c:type:`v4l2_modulator` and call the
-:ref:`VIDIOC_G_MODULATOR <VIDIOC_G_MODULATOR>` ioctl with a pointer to this structure. Drivers
-fill the rest of the structure or return an ``EINVAL`` error code when the
-index is out of bounds. To enumerate all modulators applications shall
-begin at index zero, incrementing by one until the driver returns
-EINVAL.
-
-Modulators have two writable properties, an audio modulation set and the
-radio frequency. To change the modulated audio subprograms, applications
-initialize the ``index`` and ``txsubchans`` fields and the ``reserved``
-array and call the :ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl. Drivers may choose a
-different audio modulation if the request cannot be satisfied. However
-this is a write-only ioctl, it does not return the actual audio
-modulation selected.
-
-:ref:`SDR <sdr>` specific modulator types are ``V4L2_TUNER_SDR`` and
-``V4L2_TUNER_RF``. For SDR devices ``txsubchans`` field must be
-initialized to zero. The term 'modulator' means SDR transmitter in this
-context.
-
-To change the radio frequency the
-:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available.
-
-
-.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}|
-
-.. c:type:: v4l2_modulator
-
-.. flat-table:: struct v4l2_modulator
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2 1 1
-
-    * - __u32
-      - ``index``
-      - Identifies the modulator, set by the application.
-    * - __u8
-      - ``name``\ [32]
-      - Name of the modulator, a NUL-terminated ASCII string.
-
-	This information is intended for the user.
-    * - __u32
-      - ``capability``
-      - Modulator capability flags. No flags are defined for this field,
-	the tuner flags in struct :c:type:`v4l2_tuner` are
-	used accordingly. The audio flags indicate the ability to encode
-	audio subprograms. They will *not* change for example with the
-	current video standard.
-    * - __u32
-      - ``rangelow``
-      - The lowest tunable frequency in units of 62.5 KHz, or if the
-	``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units of
-	62.5 Hz, or if the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is
-	set, in units of 1 Hz.
-    * - __u32
-      - ``rangehigh``
-      - The highest tunable frequency in units of 62.5 KHz, or if the
-	``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units of
-	62.5 Hz, or if the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is
-	set, in units of 1 Hz.
-    * - __u32
-      - ``txsubchans``
-      - With this field applications can determine how audio sub-carriers
-	shall be modulated. It contains a set of flags as defined in
-	:ref:`modulator-txsubchans`.
-
-	.. note::
-
-	   The tuner ``rxsubchans`` flags  are reused, but the
-	   semantics are different. Video output devices
-	   are assumed to have an analog or PCM audio input with 1-3
-	   channels. The ``txsubchans`` flags select one or more channels
-	   for modulation, together with some audio subprogram indicator,
-	   for example, a stereo pilot tone.
-    * - __u32
-      - ``type``
-      - :cspan:`2` Type of the modulator, see :c:type:`v4l2_tuner_type`.
-    * - __u32
-      - ``reserved``\ [3]
-      - Reserved for future extensions.
-
-	Drivers and applications must set the array to zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _modulator-txsubchans:
-
-.. flat-table:: Modulator Audio Transmission Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_TUNER_SUB_MONO``
-      - 0x0001
-      - Modulate channel 1 as mono audio, when the input has more
-	channels, a down-mix of channel 1 and 2. This flag does not
-	combine with ``V4L2_TUNER_SUB_STEREO`` or
-	``V4L2_TUNER_SUB_LANG1``.
-    * - ``V4L2_TUNER_SUB_STEREO``
-      - 0x0002
-      - Modulate channel 1 and 2 as left and right channel of a stereo
-	audio signal. When the input has only one channel or two channels
-	and ``V4L2_TUNER_SUB_SAP`` is also set, channel 1 is encoded as
-	left and right channel. This flag does not combine with
-	``V4L2_TUNER_SUB_MONO`` or ``V4L2_TUNER_SUB_LANG1``. When the
-	driver does not support stereo audio it shall fall back to mono.
-    * - ``V4L2_TUNER_SUB_LANG1``
-      - 0x0008
-      - Modulate channel 1 and 2 as primary and secondary language of a
-	bilingual audio signal. When the input has only one channel it is
-	used for both languages. It is not possible to encode the primary
-	or secondary language only. This flag does not combine with
-	``V4L2_TUNER_SUB_MONO``, ``V4L2_TUNER_SUB_STEREO`` or
-	``V4L2_TUNER_SUB_SAP``. If the hardware does not support the
-	respective audio matrix, or the current video standard does not
-	permit bilingual audio the :ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl shall
-	return an ``EINVAL`` error code and the driver shall fall back to mono
-	or stereo mode.
-    * - ``V4L2_TUNER_SUB_LANG2``
-      - 0x0004
-      - Same effect as ``V4L2_TUNER_SUB_SAP``.
-    * - ``V4L2_TUNER_SUB_SAP``
-      - 0x0004
-      - When combined with ``V4L2_TUNER_SUB_MONO`` the first channel is
-	encoded as mono audio, the last channel as Second Audio Program.
-	When the input has only one channel it is used for both audio
-	tracks. When the input has three channels the mono track is a
-	down-mix of channel 1 and 2. When combined with
-	``V4L2_TUNER_SUB_STEREO`` channel 1 and 2 are encoded as left and
-	right stereo audio, channel 3 as Second Audio Program. When the
-	input has only two channels, the first is encoded as left and
-	right channel and the second as SAP. When the input has only one
-	channel it is used for all audio tracks. It is not possible to
-	encode a Second Audio Program only. This flag must combine with
-	``V4L2_TUNER_SUB_MONO`` or ``V4L2_TUNER_SUB_STEREO``. If the
-	hardware does not support the respective audio matrix, or the
-	current video standard does not permit SAP the
-	:ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl shall return an ``EINVAL`` error code and
-	driver shall fall back to mono or stereo mode.
-    * - ``V4L2_TUNER_SUB_RDS``
-      - 0x0010
-      - Enable the RDS encoder for a radio FM transmitter.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_modulator` ``index`` is
-    out of bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-output.rst b/Documentation/media/uapi/v4l/vidioc-g-output.rst
deleted file mode 100644
index 69542d78977b..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-output.rst
+++ /dev/null
@@ -1,73 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_OUTPUT:
-
-**************************************
-ioctl VIDIOC_G_OUTPUT, VIDIOC_S_OUTPUT
-**************************************
-
-Name
-====
-
-VIDIOC_G_OUTPUT - VIDIOC_S_OUTPUT - Query or select the current video output
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_OUTPUT, int *argp )
-    :name: VIDIOC_G_OUTPUT
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_OUTPUT, int *argp )
-    :name: VIDIOC_S_OUTPUT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to an integer with output index.
-
-
-Description
-===========
-
-To query the current video output applications call the
-:ref:`VIDIOC_G_OUTPUT <VIDIOC_G_OUTPUT>` ioctl with a pointer to an integer where the driver
-stores the number of the output, as in the struct
-:c:type:`v4l2_output` ``index`` field. This ioctl will
-fail only when there are no video outputs, returning the ``EINVAL`` error
-code.
-
-To select a video output applications store the number of the desired
-output in an integer and call the :ref:`VIDIOC_S_OUTPUT <VIDIOC_G_OUTPUT>` ioctl with a
-pointer to this integer. Side effects are possible. For example outputs
-may support different video standards, so the driver may implicitly
-switch the current standard. standard. Because of these possible side
-effects applications must select an output before querying or
-negotiating any other parameters.
-
-Information about video outputs is available using the
-:ref:`VIDIOC_ENUMOUTPUT` ioctl.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The number of the video output is out of bounds, or there are no
-    video outputs at all.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-parm.rst b/Documentation/media/uapi/v4l/vidioc-g-parm.rst
deleted file mode 100644
index 044a459e073f..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-parm.rst
+++ /dev/null
@@ -1,270 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_PARM:
-
-**********************************
-ioctl VIDIOC_G_PARM, VIDIOC_S_PARM
-**********************************
-
-Name
-====
-
-VIDIOC_G_PARM - VIDIOC_S_PARM - Get or set streaming parameters
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_PARM, v4l2_streamparm *argp )
-    :name: VIDIOC_G_PARM
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_PARM, v4l2_streamparm *argp )
-    :name: VIDIOC_S_PARM
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_streamparm`.
-
-
-Description
-===========
-
-The current video standard determines a nominal number of frames per
-second. If less than this number of frames is to be captured or output,
-applications can request frame skipping or duplicating on the driver
-side. This is especially useful when using the :ref:`read() <func-read>` or
-:ref:`write() <func-write>`, which are not augmented by timestamps or sequence
-counters, and to avoid unnecessary data copying.
-
-Changing the frame interval shall never change the format. Changing the
-format, on the other hand, may change the frame interval.
-
-Further these ioctls can be used to determine the number of buffers used
-internally by a driver in read/write mode. For implications see the
-section discussing the :ref:`read() <func-read>` function.
-
-To get and set the streaming parameters applications call the
-:ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and :ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` ioctl, respectively. They take a
-pointer to a struct :c:type:`v4l2_streamparm` which contains a
-union holding separate parameters for input and output devices.
-
-
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
-
-.. c:type:: v4l2_streamparm
-
-.. flat-table:: struct v4l2_streamparm
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - The buffer (stream) type, same as struct
-	:c:type:`v4l2_format` ``type``, set by the
-	application. See :c:type:`v4l2_buf_type`.
-    * - union {
-      - ``parm``
-    * - struct :c:type:`v4l2_captureparm`
-      - ``capture``
-      - Parameters for capture devices, used when ``type`` is
-	``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or
-	``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``.
-    * - struct :c:type:`v4l2_outputparm`
-      - ``output``
-      - Parameters for output devices, used when ``type`` is
-	``V4L2_BUF_TYPE_VIDEO_OUTPUT`` or ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``.
-    * - __u8
-      - ``raw_data``\ [200]
-      - A place holder for future extensions.
-    * - }
-      -
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_captureparm
-
-.. flat-table:: struct v4l2_captureparm
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``capability``
-      - See :ref:`parm-caps`.
-    * - __u32
-      - ``capturemode``
-      - Set by drivers and applications, see :ref:`parm-flags`.
-    * - struct :c:type:`v4l2_fract`
-      - ``timeperframe``
-      - This is the desired period between successive frames captured by
-	the driver, in seconds. The field is intended to skip frames on
-	the driver side, saving I/O bandwidth.
-
-	Applications store here the desired frame period, drivers return
-	the actual frame period, which must be greater or equal to the
-	nominal frame period determined by the current video standard
-	(struct :c:type:`v4l2_standard` ``frameperiod``
-	field). Changing the video standard (also implicitly by switching
-	the video input) may reset this parameter to the nominal frame
-	period. To reset manually applications can just set this field to
-	zero.
-
-	Drivers support this function only when they set the
-	``V4L2_CAP_TIMEPERFRAME`` flag in the ``capability`` field.
-    * - __u32
-      - ``extendedmode``
-      - Custom (driver specific) streaming parameters. When unused,
-	applications and drivers must set this field to zero. Applications
-	using this field should check the driver name and version, see
-	:ref:`querycap`.
-    * - __u32
-      - ``readbuffers``
-      - Applications set this field to the desired number of buffers used
-	internally by the driver in :ref:`read() <func-read>` mode.
-	Drivers return the actual number of buffers. When an application
-	requests zero buffers, drivers should just return the current
-	setting rather than the minimum or an error code. For details see
-	:ref:`rw`.
-    * - __u32
-      - ``reserved``\ [4]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_outputparm
-
-.. flat-table:: struct v4l2_outputparm
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``capability``
-      - See :ref:`parm-caps`.
-    * - __u32
-      - ``outputmode``
-      - Set by drivers and applications, see :ref:`parm-flags`.
-    * - struct :c:type:`v4l2_fract`
-      - ``timeperframe``
-      - This is the desired period between successive frames output by the
-	driver, in seconds.
-    * - :cspan:`2`
-
-	The field is intended to repeat frames on the driver side in
-	:ref:`write() <func-write>` mode (in streaming mode timestamps
-	can be used to throttle the output), saving I/O bandwidth.
-
-	Applications store here the desired frame period, drivers return
-	the actual frame period, which must be greater or equal to the
-	nominal frame period determined by the current video standard
-	(struct :c:type:`v4l2_standard` ``frameperiod``
-	field). Changing the video standard (also implicitly by switching
-	the video output) may reset this parameter to the nominal frame
-	period. To reset manually applications can just set this field to
-	zero.
-
-	Drivers support this function only when they set the
-	``V4L2_CAP_TIMEPERFRAME`` flag in the ``capability`` field.
-    * - __u32
-      - ``extendedmode``
-      - Custom (driver specific) streaming parameters. When unused,
-	applications and drivers must set this field to zero. Applications
-	using this field should check the driver name and version, see
-	:ref:`querycap`.
-    * - __u32
-      - ``writebuffers``
-      - Applications set this field to the desired number of buffers used
-	internally by the driver in :ref:`write() <func-write>` mode. Drivers
-	return the actual number of buffers. When an application requests
-	zero buffers, drivers should just return the current setting
-	rather than the minimum or an error code. For details see
-	:ref:`rw`.
-    * - __u32
-      - ``reserved``\ [4]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _parm-caps:
-
-.. flat-table:: Streaming Parameters Capabilities
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_CAP_TIMEPERFRAME``
-      - 0x1000
-      - The frame skipping/repeating controlled by the ``timeperframe``
-	field is supported.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _parm-flags:
-
-.. flat-table:: Capture Parameters Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_MODE_HIGHQUALITY``
-      - 0x0001
-      - High quality imaging mode. High quality mode is intended for still
-	imaging applications. The idea is to get the best possible image
-	quality that the hardware can deliver. It is not defined how the
-	driver writer may achieve that; it will depend on the hardware and
-	the ingenuity of the driver writer. High quality mode is a
-	different mode from the regular motion video capture modes. In
-	high quality mode:
-
-	-  The driver may be able to capture higher resolutions than for
-	   motion capture.
-
-	-  The driver may support fewer pixel formats than motion capture
-	   (eg; true color).
-
-	-  The driver may capture and arithmetically combine multiple
-	   successive fields or frames to remove color edge artifacts and
-	   reduce the noise in the video data.
-
-	-  The driver may capture images in slices like a scanner in order
-	   to handle larger format images than would otherwise be
-	   possible.
-
-	-  An image capture operation may be significantly slower than
-	   motion capture.
-
-	-  Moving objects in the image might have excessive motion blur.
-
-	-  Capture might only work through the :ref:`read() <func-read>` call.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-priority.rst b/Documentation/media/uapi/v4l/vidioc-g-priority.rst
deleted file mode 100644
index 244b4dbe9df3..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-priority.rst
+++ /dev/null
@@ -1,100 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_PRIORITY:
-
-******************************************
-ioctl VIDIOC_G_PRIORITY, VIDIOC_S_PRIORITY
-******************************************
-
-Name
-====
-
-VIDIOC_G_PRIORITY - VIDIOC_S_PRIORITY - Query or request the access priority associated with a file descriptor
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_PRIORITY, enum v4l2_priority *argp )
-    :name: VIDIOC_G_PRIORITY
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_PRIORITY, const enum v4l2_priority *argp )
-    :name: VIDIOC_S_PRIORITY
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to an enum :c:type:`v4l2_priority` type.
-
-
-Description
-===========
-
-To query the current access priority applications call the
-:ref:`VIDIOC_G_PRIORITY <VIDIOC_G_PRIORITY>` ioctl with a pointer to an enum v4l2_priority
-variable where the driver stores the current priority.
-
-To request an access priority applications store the desired priority in
-an enum v4l2_priority variable and call :ref:`VIDIOC_S_PRIORITY <VIDIOC_G_PRIORITY>` ioctl
-with a pointer to this variable.
-
-
-.. c:type:: v4l2_priority
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. flat-table:: enum v4l2_priority
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_PRIORITY_UNSET``
-      - 0
-      -
-    * - ``V4L2_PRIORITY_BACKGROUND``
-      - 1
-      - Lowest priority, usually applications running in background, for
-	example monitoring VBI transmissions. A proxy application running
-	in user space will be necessary if multiple applications want to
-	read from a device at this priority.
-    * - ``V4L2_PRIORITY_INTERACTIVE``
-      - 2
-      -
-    * - ``V4L2_PRIORITY_DEFAULT``
-      - 2
-      - Medium priority, usually applications started and interactively
-	controlled by the user. For example TV viewers, Teletext browsers,
-	or just "panel" applications to change the channel or video
-	controls. This is the default priority unless an application
-	requests another.
-    * - ``V4L2_PRIORITY_RECORD``
-      - 3
-      - Highest priority. Only one file descriptor can have this priority,
-	it blocks any other fd from changing device properties. Usually
-	applications which must not be interrupted, like video recording.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The requested priority value is invalid.
-
-EBUSY
-    Another application already requested higher priority.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-g-selection.rst
deleted file mode 100644
index 7d8ef7ac8e27..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-selection.rst
+++ /dev/null
@@ -1,200 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_SELECTION:
-
-********************************************
-ioctl VIDIOC_G_SELECTION, VIDIOC_S_SELECTION
-********************************************
-
-Name
-====
-
-VIDIOC_G_SELECTION - VIDIOC_S_SELECTION - Get or set one of the selection rectangles
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_SELECTION, struct v4l2_selection *argp )
-    :name: VIDIOC_G_SELECTION
-
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_SELECTION, struct v4l2_selection *argp )
-    :name: VIDIOC_S_SELECTION
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_selection`.
-
-Description
-===========
-
-The ioctls are used to query and configure selection rectangles.
-
-To query the cropping (composing) rectangle set struct
-:c:type:`v4l2_selection` ``type`` field to the
-respective buffer type. The next step is setting the
-value of struct :c:type:`v4l2_selection` ``target``
-field to ``V4L2_SEL_TGT_CROP`` (``V4L2_SEL_TGT_COMPOSE``). Please refer
-to table :ref:`v4l2-selections-common` or :ref:`selection-api` for
-additional targets. The ``flags`` and ``reserved`` fields of struct
-:c:type:`v4l2_selection` are ignored and they must be
-filled with zeros. The driver fills the rest of the structure or returns
-EINVAL error code if incorrect buffer type or target was used. If
-cropping (composing) is not supported then the active rectangle is not
-mutable and it is always equal to the bounds rectangle. Finally, the
-struct :c:type:`v4l2_rect` ``r`` rectangle is filled with
-the current cropping (composing) coordinates. The coordinates are
-expressed in driver-dependent units. The only exception are rectangles
-for images in raw formats, whose coordinates are always expressed in
-pixels.
-
-To change the cropping (composing) rectangle set the struct
-:c:type:`v4l2_selection` ``type`` field to the
-respective buffer type. The next step is setting the
-value of struct :c:type:`v4l2_selection` ``target`` to
-``V4L2_SEL_TGT_CROP`` (``V4L2_SEL_TGT_COMPOSE``). Please refer to table
-:ref:`v4l2-selections-common` or :ref:`selection-api` for additional
-targets. The struct :c:type:`v4l2_rect` ``r`` rectangle need
-to be set to the desired active area. Field struct
-:c:type:`v4l2_selection` ``reserved`` is ignored and
-must be filled with zeros. The driver may adjust coordinates of the
-requested rectangle. An application may introduce constraints to control
-rounding behaviour. The struct :c:type:`v4l2_selection`
-``flags`` field must be set to one of the following:
-
--  ``0`` - The driver can adjust the rectangle size freely and shall
-   choose a crop/compose rectangle as close as possible to the requested
-   one.
-
--  ``V4L2_SEL_FLAG_GE`` - The driver is not allowed to shrink the
-   rectangle. The original rectangle must lay inside the adjusted one.
-
--  ``V4L2_SEL_FLAG_LE`` - The driver is not allowed to enlarge the
-   rectangle. The adjusted rectangle must lay inside the original one.
-
--  ``V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE`` - The driver must choose the
-   size exactly the same as in the requested rectangle.
-
-Please refer to :ref:`sel-const-adjust`.
-
-The driver may have to adjusts the requested dimensions against hardware
-limits and other parts as the pipeline, i.e. the bounds given by the
-capture/output window or TV display. The closest possible values of
-horizontal and vertical offset and sizes are chosen according to
-following priority:
-
-1. Satisfy constraints from struct
-   :c:type:`v4l2_selection` ``flags``.
-
-2. Adjust width, height, left, and top to hardware limits and
-   alignments.
-
-3. Keep center of adjusted rectangle as close as possible to the
-   original one.
-
-4. Keep width and height as close as possible to original ones.
-
-5. Keep horizontal and vertical offset as close as possible to original
-   ones.
-
-On success the struct :c:type:`v4l2_rect` ``r`` field
-contains the adjusted rectangle. When the parameters are unsuitable the
-application may modify the cropping (composing) or image parameters and
-repeat the cycle until satisfactory parameters have been negotiated. If
-constraints flags have to be violated at then ``ERANGE`` is returned. The
-error indicates that *there exist no rectangle* that satisfies the
-constraints.
-
-Selection targets and flags are documented in
-:ref:`v4l2-selections-common`.
-
-
-.. _sel-const-adjust:
-
-.. kernel-figure::  constraints.svg
-    :alt:    constraints.svg
-    :align:  center
-
-    Size adjustments with constraint flags.
-
-    Behaviour of rectangle adjustment for different constraint flags.
-
-
-
-
-.. c:type:: v4l2_selection
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_selection
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - Type of the buffer (from enum
-	:c:type:`v4l2_buf_type`).
-    * - __u32
-      - ``target``
-      - Used to select between
-	:ref:`cropping and composing rectangles <v4l2-selections-common>`.
-    * - __u32
-      - ``flags``
-      - Flags controlling the selection rectangle adjustments, refer to
-	:ref:`selection flags <v4l2-selection-flags>`.
-    * - struct :c:type:`v4l2_rect`
-      - ``r``
-      - The selection rectangle.
-    * - __u32
-      - ``reserved[9]``
-      - Reserved fields for future use. Drivers and applications must zero
-	this array.
-
-.. note::
-   Unfortunately in the case of multiplanar buffer types
-   (``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``)
-   this API was messed up with regards to how the :c:type:`v4l2_selection` ``type`` field
-   should be filled in. Some drivers only accepted the ``_MPLANE`` buffer type while
-   other drivers only accepted a non-multiplanar buffer type (i.e. without the
-   ``_MPLANE`` at the end).
-
-   Starting with kernel 4.13 both variations are allowed.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    Given buffer type ``type`` or the selection target ``target`` is not
-    supported, or the ``flags`` argument is not valid.
-
-ERANGE
-    It is not possible to adjust struct :c:type:`v4l2_rect`
-    ``r`` rectangle to satisfy all constraints given in the ``flags``
-    argument.
-
-ENODATA
-    Selection is not supported for this input or output.
-
-EBUSY
-    It is not possible to apply change of the selection rectangle at the
-    moment. Usually because streaming is in progress.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst
deleted file mode 100644
index 388b826d44b3..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst
+++ /dev/null
@@ -1,202 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_SLICED_VBI_CAP:
-
-*****************************
-ioctl VIDIOC_G_SLICED_VBI_CAP
-*****************************
-
-Name
-====
-
-VIDIOC_G_SLICED_VBI_CAP - Query sliced VBI capabilities
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_SLICED_VBI_CAP, struct v4l2_sliced_vbi_cap *argp )
-    :name: VIDIOC_G_SLICED_VBI_CAP
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_sliced_vbi_cap`.
-
-
-Description
-===========
-
-To find out which data services are supported by a sliced VBI capture or
-output device, applications initialize the ``type`` field of a struct
-:c:type:`v4l2_sliced_vbi_cap`, clear the
-``reserved`` array and call the :ref:`VIDIOC_G_SLICED_VBI_CAP <VIDIOC_G_SLICED_VBI_CAP>` ioctl. The
-driver fills in the remaining fields or returns an ``EINVAL`` error code if
-the sliced VBI API is unsupported or ``type`` is invalid.
-
-.. note::
-
-   The ``type`` field was added, and the ioctl changed from read-only
-   to write-read, in Linux 2.6.19.
-
-
-.. c:type:: v4l2_sliced_vbi_cap
-
-.. tabularcolumns:: |p{1.2cm}|p{4.2cm}|p{4.1cm}|p{4.0cm}|p{4.0cm}|
-
-.. flat-table:: struct v4l2_sliced_vbi_cap
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 3 2 2 2
-
-    * - __u16
-      - ``service_set``
-      - :cspan:`2` A set of all data services supported by the driver.
-
-	Equal to the union of all elements of the ``service_lines`` array.
-    * - __u16
-      - ``service_lines``\ [2][24]
-      - :cspan:`2` Each element of this array contains a set of data
-	services the hardware can look for or insert into a particular
-	scan line. Data services are defined in :ref:`vbi-services`.
-	Array indices map to ITU-R line numbers\ [#f1]_ as follows:
-    * -
-      -
-      - Element
-      - 525 line systems
-      - 625 line systems
-    * -
-      -
-      - ``service_lines``\ [0][1]
-      - 1
-      - 1
-    * -
-      -
-      - ``service_lines``\ [0][23]
-      - 23
-      - 23
-    * -
-      -
-      - ``service_lines``\ [1][1]
-      - 264
-      - 314
-    * -
-      -
-      - ``service_lines``\ [1][23]
-      - 286
-      - 336
-    * -
-    * -
-      -
-      - :cspan:`2` The number of VBI lines the hardware can capture or
-	output per frame, or the number of services it can identify on a
-	given line may be limited. For example on PAL line 16 the hardware
-	may be able to look for a VPS or Teletext signal, but not both at
-	the same time. Applications can learn about these limits using the
-	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl as described in
-	:ref:`sliced`.
-    * -
-    * -
-      -
-      - :cspan:`2` Drivers must set ``service_lines`` [0][0] and
-	``service_lines``\ [1][0] to zero.
-    * - __u32
-      - ``type``
-      - Type of the data stream, see :c:type:`v4l2_buf_type`. Should be
-	``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE`` or
-	``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``.
-    * - __u32
-      - ``reserved``\ [3]
-      - :cspan:`2` This array is reserved for future extensions.
-
-	Applications and drivers must set it to zero.
-
-.. [#f1]
-
-   See also :ref:`vbi-525` and :ref:`vbi-625`.
-
-
-.. raw:: latex
-
-    \scriptsize
-
-.. tabularcolumns:: |p{3.5cm}|p{1.0cm}|p{2.0cm}|p{2.0cm}|p{8.0cm}|
-
-.. _vbi-services:
-
-.. flat-table:: Sliced VBI services
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       2 1 1 2 2
-
-    * - Symbol
-      - Value
-      - Reference
-      - Lines, usually
-      - Payload
-    * - ``V4L2_SLICED_TELETEXT_B`` (Teletext System B)
-      - 0x0001
-      - :ref:`ets300706`,
-
-	:ref:`itu653`
-      - PAL/SECAM line 7-22, 320-335 (second field 7-22)
-      - Last 42 of the 45 byte Teletext packet, that is without clock
-	run-in and framing code, lsb first transmitted.
-    * - ``V4L2_SLICED_VPS``
-      - 0x0400
-      - :ref:`ets300231`
-      - PAL line 16
-      - Byte number 3 to 15 according to Figure 9 of ETS 300 231, lsb
-	first transmitted.
-    * - ``V4L2_SLICED_CAPTION_525``
-      - 0x1000
-      - :ref:`cea608`
-      - NTSC line 21, 284 (second field 21)
-      - Two bytes in transmission order, including parity bit, lsb first
-	transmitted.
-    * - ``V4L2_SLICED_WSS_625``
-      - 0x4000
-      - :ref:`en300294`,
-
-	:ref:`itu1119`
-      - PAL/SECAM line 23
-      -
-
-	::
-
-	    Byte        0                 1
-		 msb         lsb  msb           lsb
-	    Bit  7 6 5 4 3 2 1 0  x x 13 12 11 10 9
-    * - ``V4L2_SLICED_VBI_525``
-      - 0x1000
-      - :cspan:`2` Set of services applicable to 525 line systems.
-    * - ``V4L2_SLICED_VBI_625``
-      - 0x4401
-      - :cspan:`2` Set of services applicable to 625 line systems.
-
-.. raw:: latex
-
-    \normalsize
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The value in the ``type`` field is wrong.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-std.rst b/Documentation/media/uapi/v4l/vidioc-g-std.rst
deleted file mode 100644
index e633e42e3910..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-std.rst
+++ /dev/null
@@ -1,81 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_STD:
-
-**************************************************************************
-ioctl VIDIOC_G_STD, VIDIOC_S_STD, VIDIOC_SUBDEV_G_STD, VIDIOC_SUBDEV_S_STD
-**************************************************************************
-
-Name
-====
-
-VIDIOC_G_STD - VIDIOC_S_STD - VIDIOC_SUBDEV_G_STD - VIDIOC_SUBDEV_S_STD - Query or select the video standard of the current input
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_STD, v4l2_std_id *argp )
-    :name: VIDIOC_G_STD
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_STD, const v4l2_std_id *argp )
-    :name: VIDIOC_S_STD
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_STD, v4l2_std_id *argp )
-    :name: VIDIOC_SUBDEV_G_STD
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_STD, const v4l2_std_id *argp )
-    :name: VIDIOC_SUBDEV_S_STD
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to :c:type:`v4l2_std_id`.
-
-
-Description
-===========
-
-To query and select the current video standard applications use the
-:ref:`VIDIOC_G_STD <VIDIOC_G_STD>` and :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` ioctls which take a pointer to a
-:ref:`v4l2_std_id <v4l2-std-id>` type as argument. :ref:`VIDIOC_G_STD <VIDIOC_G_STD>`
-can return a single flag or a set of flags as in struct
-:c:type:`v4l2_standard` field ``id``. The flags must be
-unambiguous such that they appear in only one enumerated
-struct :c:type:`v4l2_standard` structure.
-
-:ref:`VIDIOC_S_STD <VIDIOC_G_STD>` accepts one or more flags, being a write-only ioctl it
-does not return the actual new standard as :ref:`VIDIOC_G_STD <VIDIOC_G_STD>` does. When
-no flags are given or the current input does not support the requested
-standard the driver returns an ``EINVAL`` error code. When the standard set
-is ambiguous drivers may return ``EINVAL`` or choose any of the requested
-standards. If the current input or output does not support standard
-video timings (e.g. if :ref:`VIDIOC_ENUMINPUT`
-does not set the ``V4L2_IN_CAP_STD`` flag), then ``ENODATA`` error code is
-returned.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` parameter was unsuitable.
-
-ENODATA
-    Standard video timings are not supported for this input or output.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst
deleted file mode 100644
index 82d23b8bd195..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst
+++ /dev/null
@@ -1,476 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_G_TUNER:
-
-************************************
-ioctl VIDIOC_G_TUNER, VIDIOC_S_TUNER
-************************************
-
-Name
-====
-
-VIDIOC_G_TUNER - VIDIOC_S_TUNER - Get or set tuner attributes
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_G_TUNER, struct v4l2_tuner *argp )
-    :name: VIDIOC_G_TUNER
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_TUNER, const struct v4l2_tuner *argp )
-    :name: VIDIOC_S_TUNER
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_tuner`.
-
-
-Description
-===========
-
-To query the attributes of a tuner applications initialize the ``index``
-field and zero out the ``reserved`` array of a struct
-:c:type:`v4l2_tuner` and call the ``VIDIOC_G_TUNER`` ioctl
-with a pointer to this structure. Drivers fill the rest of the structure
-or return an ``EINVAL`` error code when the index is out of bounds. To
-enumerate all tuners applications shall begin at index zero,
-incrementing by one until the driver returns ``EINVAL``.
-
-Tuners have two writable properties, the audio mode and the radio
-frequency. To change the audio mode, applications initialize the
-``index``, ``audmode`` and ``reserved`` fields and call the
-``VIDIOC_S_TUNER`` ioctl. This will *not* change the current tuner,
-which is determined by the current video input. Drivers may choose a
-different audio mode if the requested mode is invalid or unsupported.
-Since this is a write-only ioctl, it does not return the actually
-selected audio mode.
-
-:ref:`SDR <sdr>` specific tuner types are ``V4L2_TUNER_SDR`` and
-``V4L2_TUNER_RF``. For SDR devices ``audmode`` field must be initialized
-to zero. The term 'tuner' means SDR receiver in this context.
-
-To change the radio frequency the
-:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available.
-
-
- .. tabularcolumns:: |p{1.3cm}|p{3.0cm}|p{6.6cm}|p{6.6cm}|
-
-.. c:type:: v4l2_tuner
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_tuner
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - __u32
-      - ``index``
-      - :cspan:`1` Identifies the tuner, set by the application.
-    * - __u8
-      - ``name``\ [32]
-      - :cspan:`1`
-
-	Name of the tuner, a NUL-terminated ASCII string.
-
-	This information is intended for the user.
-    * - __u32
-      - ``type``
-      - :cspan:`1` Type of the tuner, see :c:type:`v4l2_tuner_type`.
-    * - __u32
-      - ``capability``
-      - :cspan:`1`
-
-	Tuner capability flags, see :ref:`tuner-capability`. Audio flags
-	indicate the ability to decode audio subprograms. They will *not*
-	change, for example with the current video standard.
-
-	When the structure refers to a radio tuner the
-	``V4L2_TUNER_CAP_LANG1``, ``V4L2_TUNER_CAP_LANG2`` and
-	``V4L2_TUNER_CAP_NORM`` flags can't be used.
-
-	If multiple frequency bands are supported, then ``capability`` is
-	the union of all ``capability`` fields of each struct
-	:c:type:`v4l2_frequency_band`.
-    * - __u32
-      - ``rangelow``
-      - :cspan:`1` The lowest tunable frequency in units of 62.5 kHz, or
-	if the ``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units
-	of 62.5 Hz, or if the ``capability`` flag ``V4L2_TUNER_CAP_1HZ``
-	is set, in units of 1 Hz. If multiple frequency bands are
-	supported, then ``rangelow`` is the lowest frequency of all the
-	frequency bands.
-    * - __u32
-      - ``rangehigh``
-      - :cspan:`1` The highest tunable frequency in units of 62.5 kHz,
-	or if the ``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in
-	units of 62.5 Hz, or if the ``capability`` flag
-	``V4L2_TUNER_CAP_1HZ`` is set, in units of 1 Hz. If multiple
-	frequency bands are supported, then ``rangehigh`` is the highest
-	frequency of all the frequency bands.
-    * - __u32
-      - ``rxsubchans``
-      - :cspan:`1`
-
-	Some tuners or audio decoders can determine the received audio
-	subprograms by analyzing audio carriers, pilot tones or other
-	indicators. To pass this information drivers set flags defined in
-	:ref:`tuner-rxsubchans` in this field. For example:
-    * -
-      -
-      - ``V4L2_TUNER_SUB_MONO``
-      - receiving mono audio
-    * -
-      -
-      - ``STEREO | SAP``
-      - receiving stereo audio and a secondary audio program
-    * -
-      -
-      - ``MONO | STEREO``
-      - receiving mono or stereo audio, the hardware cannot distinguish
-    * -
-      -
-      - ``LANG1 | LANG2``
-      - receiving bilingual audio
-    * -
-      -
-      - ``MONO | STEREO | LANG1 | LANG2``
-      - receiving mono, stereo or bilingual audio
-    * -
-      -
-      - :cspan:`1`
-
-	When the ``V4L2_TUNER_CAP_STEREO``, ``_LANG1``, ``_LANG2`` or
-	``_SAP`` flag is cleared in the ``capability`` field, the
-	corresponding ``V4L2_TUNER_SUB_`` flag must not be set here.
-
-	This field is valid only if this is the tuner of the current video
-	input, or when the structure refers to a radio tuner.
-    * - __u32
-      - ``audmode``
-      - :cspan:`1`
-
-	The selected audio mode, see :ref:`tuner-audmode` for valid
-	values. The audio mode does not affect audio subprogram detection,
-	and like a :ref:`control` it does not automatically
-	change unless the requested mode is invalid or unsupported. See
-	:ref:`tuner-matrix` for possible results when the selected and
-	received audio programs do not match.
-
-	Currently this is the only field of struct
-	struct :c:type:`v4l2_tuner` applications can change.
-    * - __u32
-      - ``signal``
-      - :cspan:`1` The signal strength if known.
-
-	Ranging from 0 to 65535. Higher values indicate a better signal.
-    * - __s32
-      - ``afc``
-      - :cspan:`1` Automatic frequency control.
-
-	When the ``afc`` value is negative, the frequency is too
-	low, when positive too high.
-    * - __u32
-      - ``reserved``\ [4]
-      - :cspan:`1` Reserved for future extensions.
-
-	Drivers and applications must set the array to zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. c:type:: v4l2_tuner_type
-
-.. flat-table:: enum v4l2_tuner_type
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 6
-
-    * - ``V4L2_TUNER_RADIO``
-      - 1
-      - Tuner supports radio
-    * - ``V4L2_TUNER_ANALOG_TV``
-      - 2
-      - Tuner supports analog TV
-    * - ``V4L2_TUNER_SDR``
-      - 4
-      - Tuner controls the A/D and/or D/A block of a
-	Software Digital Radio (SDR)
-    * - ``V4L2_TUNER_RF``
-      - 5
-      - Tuner controls the RF part of a Software Digital Radio (SDR)
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _tuner-capability:
-
-.. cssclass:: longtable
-
-.. flat-table:: Tuner and Modulator Capability Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_TUNER_CAP_LOW``
-      - 0x0001
-      - When set, tuning frequencies are expressed in units of 62.5 Hz
-	instead of 62.5 kHz.
-    * - ``V4L2_TUNER_CAP_NORM``
-      - 0x0002
-      - This is a multi-standard tuner; the video standard can or must be
-	switched. (B/G PAL tuners for example are typically not considered
-	multi-standard because the video standard is automatically
-	determined from the frequency band.) The set of supported video
-	standards is available from the struct
-	:c:type:`v4l2_input` pointing to this tuner, see the
-	description of ioctl :ref:`VIDIOC_ENUMINPUT`
-	for details. Only ``V4L2_TUNER_ANALOG_TV`` tuners can have this
-	capability.
-    * - ``V4L2_TUNER_CAP_HWSEEK_BOUNDED``
-      - 0x0004
-      - If set, then this tuner supports the hardware seek functionality
-	where the seek stops when it reaches the end of the frequency
-	range.
-    * - ``V4L2_TUNER_CAP_HWSEEK_WRAP``
-      - 0x0008
-      - If set, then this tuner supports the hardware seek functionality
-	where the seek wraps around when it reaches the end of the
-	frequency range.
-    * - ``V4L2_TUNER_CAP_STEREO``
-      - 0x0010
-      - Stereo audio reception is supported.
-    * - ``V4L2_TUNER_CAP_LANG1``
-      - 0x0040
-      - Reception of the primary language of a bilingual audio program is
-	supported. Bilingual audio is a feature of two-channel systems,
-	transmitting the primary language monaural on the main audio
-	carrier and a secondary language monaural on a second carrier.
-	Only ``V4L2_TUNER_ANALOG_TV`` tuners can have this capability.
-    * - ``V4L2_TUNER_CAP_LANG2``
-      - 0x0020
-      - Reception of the secondary language of a bilingual audio program
-	is supported. Only ``V4L2_TUNER_ANALOG_TV`` tuners can have this
-	capability.
-    * - ``V4L2_TUNER_CAP_SAP``
-      - 0x0020
-      - Reception of a secondary audio program is supported. This is a
-	feature of the BTSC system which accompanies the NTSC video
-	standard. Two audio carriers are available for mono or stereo
-	transmissions of a primary language, and an independent third
-	carrier for a monaural secondary language. Only
-	``V4L2_TUNER_ANALOG_TV`` tuners can have this capability.
-
-	.. note::
-
-	   The ``V4L2_TUNER_CAP_LANG2`` and ``V4L2_TUNER_CAP_SAP``
-	   flags are synonyms. ``V4L2_TUNER_CAP_SAP`` applies when the tuner
-	   supports the ``V4L2_STD_NTSC_M`` video standard.
-    * - ``V4L2_TUNER_CAP_RDS``
-      - 0x0080
-      - RDS capture is supported. This capability is only valid for radio
-	tuners.
-    * - ``V4L2_TUNER_CAP_RDS_BLOCK_IO``
-      - 0x0100
-      - The RDS data is passed as unparsed RDS blocks.
-    * - ``V4L2_TUNER_CAP_RDS_CONTROLS``
-      - 0x0200
-      - The RDS data is parsed by the hardware and set via controls.
-    * - ``V4L2_TUNER_CAP_FREQ_BANDS``
-      - 0x0400
-      - The :ref:`VIDIOC_ENUM_FREQ_BANDS`
-	ioctl can be used to enumerate the available frequency bands.
-    * - ``V4L2_TUNER_CAP_HWSEEK_PROG_LIM``
-      - 0x0800
-      - The range to search when using the hardware seek functionality is
-	programmable, see
-	:ref:`VIDIOC_S_HW_FREQ_SEEK` for
-	details.
-    * - ``V4L2_TUNER_CAP_1HZ``
-      - 0x1000
-      - When set, tuning frequencies are expressed in units of 1 Hz
-	instead of 62.5 kHz.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _tuner-rxsubchans:
-
-.. flat-table:: Tuner Audio Reception Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_TUNER_SUB_MONO``
-      - 0x0001
-      - The tuner receives a mono audio signal.
-    * - ``V4L2_TUNER_SUB_STEREO``
-      - 0x0002
-      - The tuner receives a stereo audio signal.
-    * - ``V4L2_TUNER_SUB_LANG1``
-      - 0x0008
-      - The tuner receives the primary language of a bilingual audio
-	signal. Drivers must clear this flag when the current video
-	standard is ``V4L2_STD_NTSC_M``.
-    * - ``V4L2_TUNER_SUB_LANG2``
-      - 0x0004
-      - The tuner receives the secondary language of a bilingual audio
-	signal (or a second audio program).
-    * - ``V4L2_TUNER_SUB_SAP``
-      - 0x0004
-      - The tuner receives a Second Audio Program.
-
-	.. note::
-
-	   The ``V4L2_TUNER_SUB_LANG2`` and ``V4L2_TUNER_SUB_SAP``
-	   flags are synonyms. The ``V4L2_TUNER_SUB_SAP`` flag applies
-	   when the current video standard is ``V4L2_STD_NTSC_M``.
-    * - ``V4L2_TUNER_SUB_RDS``
-      - 0x0010
-      - The tuner receives an RDS channel.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _tuner-audmode:
-
-.. flat-table:: Tuner Audio Modes
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_TUNER_MODE_MONO``
-      - 0
-      - Play mono audio. When the tuner receives a stereo signal this a
-	down-mix of the left and right channel. When the tuner receives a
-	bilingual or SAP signal this mode selects the primary language.
-    * - ``V4L2_TUNER_MODE_STEREO``
-      - 1
-      - Play stereo audio. When the tuner receives bilingual audio it may
-	play different languages on the left and right channel or the
-	primary language is played on both channels.
-
-	Playing different languages in this mode is deprecated. New
-	drivers should do this only in ``MODE_LANG1_LANG2``.
-
-	When the tuner receives no stereo signal or does not support
-	stereo reception the driver shall fall back to ``MODE_MONO``.
-    * - ``V4L2_TUNER_MODE_LANG1``
-      - 3
-      - Play the primary language, mono or stereo. Only
-	``V4L2_TUNER_ANALOG_TV`` tuners support this mode.
-    * - ``V4L2_TUNER_MODE_LANG2``
-      - 2
-      - Play the secondary language, mono. When the tuner receives no
-	bilingual audio or SAP, or their reception is not supported the
-	driver shall fall back to mono or stereo mode. Only
-	``V4L2_TUNER_ANALOG_TV`` tuners support this mode.
-    * - ``V4L2_TUNER_MODE_SAP``
-      - 2
-      - Play the Second Audio Program. When the tuner receives no
-	bilingual audio or SAP, or their reception is not supported the
-	driver shall fall back to mono or stereo mode. Only
-	``V4L2_TUNER_ANALOG_TV`` tuners support this mode.
-
-	.. note:: The ``V4L2_TUNER_MODE_LANG2`` and ``V4L2_TUNER_MODE_SAP``
-	   are synonyms.
-    * - ``V4L2_TUNER_MODE_LANG1_LANG2``
-      - 4
-      - Play the primary language on the left channel, the secondary
-	language on the right channel. When the tuner receives no
-	bilingual audio or SAP, it shall fall back to ``MODE_LANG1`` or
-	``MODE_MONO``. Only ``V4L2_TUNER_ANALOG_TV`` tuners support this
-	mode.
-
-.. raw:: latex
-
-    \scriptsize
-
-.. tabularcolumns:: |p{1.5cm}|p{1.5cm}|p{2.9cm}|p{2.9cm}|p{2.9cm}|p{2.9cm}|
-
-.. _tuner-matrix:
-
-.. flat-table:: Tuner Audio Matrix
-    :header-rows:  2
-    :stub-columns: 0
-    :widths: 7 7 14 14 14 14
-
-    * -
-      - :cspan:`4` Selected ``V4L2_TUNER_MODE_``
-    * - Received ``V4L2_TUNER_SUB_``
-      - ``MONO``
-      - ``STEREO``
-      - ``LANG1``
-      - ``LANG2 = SAP``
-      - ``LANG1_LANG2``\ [#f1]_
-    * - ``MONO``
-      - Mono
-      - Mono/Mono
-      - Mono
-      - Mono
-      - Mono/Mono
-    * - ``MONO | SAP``
-      - Mono
-      - Mono/Mono
-      - Mono
-      - SAP
-      - Mono/SAP (preferred) or Mono/Mono
-    * - ``STEREO``
-      - L+R
-      - L/R
-      - Stereo L/R (preferred) or Mono L+R
-      - Stereo L/R (preferred) or Mono L+R
-      - L/R (preferred) or L+R/L+R
-    * - ``STEREO | SAP``
-      - L+R
-      - L/R
-      - Stereo L/R (preferred) or Mono L+R
-      - SAP
-      - L+R/SAP (preferred) or L/R or L+R/L+R
-    * - ``LANG1 | LANG2``
-      - Language 1
-      - Lang1/Lang2 (deprecated\ [#f2]_) or Lang1/Lang1
-      - Language 1
-      - Language 2
-      - Lang1/Lang2 (preferred) or Lang1/Lang1
-
-.. raw:: latex
-
-    \normalsize
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :c:type:`v4l2_tuner` ``index`` is out of
-    bounds.
-
-.. [#f1]
-   This mode has been added in Linux 2.6.17 and may not be supported by
-   older drivers.
-
-.. [#f2]
-   Playback of both languages in ``MODE_STEREO`` is deprecated. In the
-   future drivers should produce only the primary language in this mode.
-   Applications should request ``MODE_LANG1_LANG2`` to record both
-   languages or a stereo signal.
diff --git a/Documentation/media/uapi/v4l/vidioc-log-status.rst b/Documentation/media/uapi/v4l/vidioc-log-status.rst
deleted file mode 100644
index 16bb5509ad66..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-log-status.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_LOG_STATUS:
-
-***********************
-ioctl VIDIOC_LOG_STATUS
-***********************
-
-Name
-====
-
-VIDIOC_LOG_STATUS - Log driver status information
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_LOG_STATUS)
-    :name: VIDIOC_LOG_STATUS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-
-Description
-===========
-
-As the video/audio devices become more complicated it becomes harder to
-debug problems. When this ioctl is called the driver will output the
-current device status to the kernel log. This is particular useful when
-dealing with problems like no sound, no video and incorrectly tuned
-channels. Also many modern devices autodetect video and audio standards
-and this ioctl will report what the device thinks what the standard is.
-Mismatches may give an indication where the problem is.
-
-This ioctl is optional and not all drivers support it. It was introduced
-in Linux 2.6.15.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/vidioc-overlay.rst b/Documentation/media/uapi/v4l/vidioc-overlay.rst
deleted file mode 100644
index fc5a86e8c1f2..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-overlay.rst
+++ /dev/null
@@ -1,61 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_OVERLAY:
-
-********************
-ioctl VIDIOC_OVERLAY
-********************
-
-Name
-====
-
-VIDIOC_OVERLAY - Start or stop video overlay
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_OVERLAY, const int *argp )
-    :name: VIDIOC_OVERLAY
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to an integer.
-
-
-Description
-===========
-
-This ioctl is part of the :ref:`video overlay <overlay>` I/O method.
-Applications call :ref:`VIDIOC_OVERLAY` to start or stop the overlay. It
-takes a pointer to an integer which must be set to zero by the
-application to stop overlay, to one to start.
-
-Drivers do not support :ref:`VIDIOC_STREAMON` or
-:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` with
-``V4L2_BUF_TYPE_VIDEO_OVERLAY``.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The overlay parameters have not been set up. See :ref:`overlay`
-    for the necessary steps.
diff --git a/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst b/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst
deleted file mode 100644
index 7c6b5f4e1011..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst
+++ /dev/null
@@ -1,65 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_PREPARE_BUF:
-
-************************
-ioctl VIDIOC_PREPARE_BUF
-************************
-
-Name
-====
-
-VIDIOC_PREPARE_BUF - Prepare a buffer for I/O
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_PREPARE_BUF, struct v4l2_buffer *argp )
-    :name: VIDIOC_PREPARE_BUF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_buffer`.
-
-
-Description
-===========
-
-Applications can optionally call the :ref:`VIDIOC_PREPARE_BUF` ioctl to
-pass ownership of the buffer to the driver before actually enqueuing it,
-using the :ref:`VIDIOC_QBUF <VIDIOC_QBUF>` ioctl, and to prepare it for future I/O. Such
-preparations may include cache invalidation or cleaning. Performing them
-in advance saves time during the actual I/O.
-
-The struct :c:type:`v4l2_buffer` structure is specified in
-:ref:`buffer`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EBUSY
-    File I/O is in progress.
-
-EINVAL
-    The buffer ``type`` is not supported, or the ``index`` is out of
-    bounds, or no buffers have been allocated yet, or the ``userptr`` or
-    ``length`` are invalid.
diff --git a/Documentation/media/uapi/v4l/vidioc-qbuf.rst b/Documentation/media/uapi/v4l/vidioc-qbuf.rst
deleted file mode 100644
index 407302d80684..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-qbuf.rst
+++ /dev/null
@@ -1,205 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_QBUF:
-
-*******************************
-ioctl VIDIOC_QBUF, VIDIOC_DQBUF
-*******************************
-
-Name
-====
-
-VIDIOC_QBUF - VIDIOC_DQBUF - Exchange a buffer with the driver
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_QBUF, struct v4l2_buffer *argp )
-    :name: VIDIOC_QBUF
-
-.. c:function:: int ioctl( int fd, VIDIOC_DQBUF, struct v4l2_buffer *argp )
-    :name: VIDIOC_DQBUF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_buffer`.
-
-
-Description
-===========
-
-Applications call the ``VIDIOC_QBUF`` ioctl to enqueue an empty
-(capturing) or filled (output) buffer in the driver's incoming queue.
-The semantics depend on the selected I/O method.
-
-To enqueue a buffer applications set the ``type`` field of a struct
-:c:type:`v4l2_buffer` to the same buffer type as was
-previously used with struct :c:type:`v4l2_format` ``type``
-and struct :c:type:`v4l2_requestbuffers` ``type``.
-Applications must also set the ``index`` field. Valid index numbers
-range from zero to the number of buffers allocated with
-:ref:`VIDIOC_REQBUFS` (struct
-:c:type:`v4l2_requestbuffers` ``count``) minus
-one. The contents of the struct :c:type:`v4l2_buffer` returned
-by a :ref:`VIDIOC_QUERYBUF` ioctl will do as well.
-When the buffer is intended for output (``type`` is
-``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``,
-or ``V4L2_BUF_TYPE_VBI_OUTPUT``) applications must also initialize the
-``bytesused``, ``field`` and ``timestamp`` fields, see :ref:`buffer`
-for details. Applications must also set ``flags`` to 0. The
-``reserved2`` and ``reserved`` fields must be set to 0. When using the
-:ref:`multi-planar API <planar-apis>`, the ``m.planes`` field must
-contain a userspace pointer to a filled-in array of struct
-:c:type:`v4l2_plane` and the ``length`` field must be set
-to the number of elements in that array.
-
-To enqueue a :ref:`memory mapped <mmap>` buffer applications set the
-``memory`` field to ``V4L2_MEMORY_MMAP``. When ``VIDIOC_QBUF`` is called
-with a pointer to this structure the driver sets the
-``V4L2_BUF_FLAG_MAPPED`` and ``V4L2_BUF_FLAG_QUEUED`` flags and clears
-the ``V4L2_BUF_FLAG_DONE`` flag in the ``flags`` field, or it returns an
-``EINVAL`` error code.
-
-To enqueue a :ref:`user pointer <userp>` buffer applications set the
-``memory`` field to ``V4L2_MEMORY_USERPTR``, the ``m.userptr`` field to
-the address of the buffer and ``length`` to its size. When the
-multi-planar API is used, ``m.userptr`` and ``length`` members of the
-passed array of struct :c:type:`v4l2_plane` have to be used
-instead. When ``VIDIOC_QBUF`` is called with a pointer to this structure
-the driver sets the ``V4L2_BUF_FLAG_QUEUED`` flag and clears the
-``V4L2_BUF_FLAG_MAPPED`` and ``V4L2_BUF_FLAG_DONE`` flags in the
-``flags`` field, or it returns an error code. This ioctl locks the
-memory pages of the buffer in physical memory, they cannot be swapped
-out to disk. Buffers remain locked until dequeued, until the
-:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or
-:ref:`VIDIOC_REQBUFS` ioctl is called, or until the
-device is closed.
-
-To enqueue a :ref:`DMABUF <dmabuf>` buffer applications set the
-``memory`` field to ``V4L2_MEMORY_DMABUF`` and the ``m.fd`` field to a
-file descriptor associated with a DMABUF buffer. When the multi-planar
-API is used the ``m.fd`` fields of the passed array of struct
-:c:type:`v4l2_plane` have to be used instead. When
-``VIDIOC_QBUF`` is called with a pointer to this structure the driver
-sets the ``V4L2_BUF_FLAG_QUEUED`` flag and clears the
-``V4L2_BUF_FLAG_MAPPED`` and ``V4L2_BUF_FLAG_DONE`` flags in the
-``flags`` field, or it returns an error code. This ioctl locks the
-buffer. Locking a buffer means passing it to a driver for a hardware
-access (usually DMA). If an application accesses (reads/writes) a locked
-buffer then the result is undefined. Buffers remain locked until
-dequeued, until the :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or
-:ref:`VIDIOC_REQBUFS` ioctl is called, or until the
-device is closed.
-
-The ``request_fd`` field can be used with the ``VIDIOC_QBUF`` ioctl to specify
-the file descriptor of a :ref:`request <media-request-api>`, if requests are
-in use. Setting it means that the buffer will not be passed to the driver
-until the request itself is queued. Also, the driver will apply any
-settings associated with the request for this buffer. This field will
-be ignored unless the ``V4L2_BUF_FLAG_REQUEST_FD`` flag is set.
-If the device does not support requests, then ``EBADR`` will be returned.
-If requests are supported but an invalid request file descriptor is given,
-then ``EINVAL`` will be returned.
-
-.. caution::
-   It is not allowed to mix queuing requests with queuing buffers directly.
-   ``EBUSY`` will be returned if the first buffer was queued directly and
-   then the application tries to queue a request, or vice versa. After
-   closing the file descriptor, calling
-   :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or calling :ref:`VIDIOC_REQBUFS`
-   the check for this will be reset.
-
-   For :ref:`memory-to-memory devices <mem2mem>` you can specify the
-   ``request_fd`` only for output buffers, not for capture buffers. Attempting
-   to specify this for a capture buffer will result in an ``EBADR`` error.
-
-Applications call the ``VIDIOC_DQBUF`` ioctl to dequeue a filled
-(capturing) or displayed (output) buffer from the driver's outgoing
-queue. They just set the ``type``, ``memory`` and ``reserved`` fields of
-a struct :c:type:`v4l2_buffer` as above, when
-``VIDIOC_DQBUF`` is called with a pointer to this structure the driver
-fills the remaining fields or returns an error code. The driver may also
-set ``V4L2_BUF_FLAG_ERROR`` in the ``flags`` field. It indicates a
-non-critical (recoverable) streaming error. In such case the application
-may continue as normal, but should be aware that data in the dequeued
-buffer might be corrupted. When using the multi-planar API, the planes
-array must be passed in as well.
-
-If the application sets the ``memory`` field to ``V4L2_MEMORY_DMABUF`` to
-dequeue a :ref:`DMABUF <dmabuf>` buffer, the driver fills the ``m.fd`` field
-with a file descriptor numerically the same as the one given to ``VIDIOC_QBUF``
-when the buffer was enqueued. No new file descriptor is created at dequeue time
-and the value is only for the application convenience. When the multi-planar
-API is used the ``m.fd`` fields of the passed array of struct
-:c:type:`v4l2_plane` are filled instead.
-
-By default ``VIDIOC_DQBUF`` blocks when no buffer is in the outgoing
-queue. When the ``O_NONBLOCK`` flag was given to the
-:ref:`open() <func-open>` function, ``VIDIOC_DQBUF`` returns
-immediately with an ``EAGAIN`` error code when no buffer is available.
-
-The struct :c:type:`v4l2_buffer` structure is specified in
-:ref:`buffer`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EAGAIN
-    Non-blocking I/O has been selected using ``O_NONBLOCK`` and no
-    buffer was in the outgoing queue.
-
-EINVAL
-    The buffer ``type`` is not supported, or the ``index`` is out of
-    bounds, or no buffers have been allocated yet, or the ``userptr`` or
-    ``length`` are invalid, or the ``V4L2_BUF_FLAG_REQUEST_FD`` flag was
-    set but the the given ``request_fd`` was invalid, or ``m.fd`` was
-    an invalid DMABUF file descriptor.
-
-EIO
-    ``VIDIOC_DQBUF`` failed due to an internal error. Can also indicate
-    temporary problems like signal loss.
-
-    .. note::
-
-       The driver might dequeue an (empty) buffer despite returning
-       an error, or even stop capturing. Reusing such buffer may be unsafe
-       though and its details (e.g. ``index``) may not be returned either.
-       It is recommended that drivers indicate recoverable errors by setting
-       the ``V4L2_BUF_FLAG_ERROR`` and returning 0 instead. In that case the
-       application should be able to safely reuse the buffer and continue
-       streaming.
-
-EPIPE
-    ``VIDIOC_DQBUF`` returns this on an empty capture queue for mem2mem
-    codecs if a buffer with the ``V4L2_BUF_FLAG_LAST`` was already
-    dequeued and no new buffers are expected to become available.
-
-EBADR
-    The ``V4L2_BUF_FLAG_REQUEST_FD`` flag was set but the device does not
-    support requests for the given buffer type, or
-    the ``V4L2_BUF_FLAG_REQUEST_FD`` flag was not set but the device requires
-    that the buffer is part of a request.
-
-EBUSY
-    The first buffer was queued via a request, but the application now tries
-    to queue it directly, or vice versa (it is not permitted to mix the two
-    APIs).
diff --git a/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst
deleted file mode 100644
index e9b055395382..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst
+++ /dev/null
@@ -1,94 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_QUERY_DV_TIMINGS:
-
-*****************************
-ioctl VIDIOC_QUERY_DV_TIMINGS
-*****************************
-
-Name
-====
-
-VIDIOC_QUERY_DV_TIMINGS - VIDIOC_SUBDEV_QUERY_DV_TIMINGS - Sense the DV preset received by the current input
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_QUERY_DV_TIMINGS, struct v4l2_dv_timings *argp )
-    :name: VIDIOC_QUERY_DV_TIMINGS
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_QUERY_DV_TIMINGS, struct v4l2_dv_timings *argp )
-    :name: VIDIOC_SUBDEV_QUERY_DV_TIMINGS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_dv_timings`.
-
-
-Description
-===========
-
-The hardware may be able to detect the current DV timings automatically,
-similar to sensing the video standard. To do so, applications call
-:ref:`VIDIOC_QUERY_DV_TIMINGS` with a pointer to a struct
-:c:type:`v4l2_dv_timings`. Once the hardware detects
-the timings, it will fill in the timings structure.
-
-.. note::
-
-   Drivers shall *not* switch timings automatically if new
-   timings are detected. Instead, drivers should send the
-   ``V4L2_EVENT_SOURCE_CHANGE`` event (if they support this) and expect
-   that userspace will take action by calling :ref:`VIDIOC_QUERY_DV_TIMINGS`.
-   The reason is that new timings usually mean different buffer sizes as
-   well, and you cannot change buffer sizes on the fly. In general,
-   applications that receive the Source Change event will have to call
-   :ref:`VIDIOC_QUERY_DV_TIMINGS`, and if the detected timings are valid they
-   will have to stop streaming, set the new timings, allocate new buffers
-   and start streaming again.
-
-If the timings could not be detected because there was no signal, then
-ENOLINK is returned. If a signal was detected, but it was unstable and
-the receiver could not lock to the signal, then ``ENOLCK`` is returned. If
-the receiver could lock to the signal, but the format is unsupported
-(e.g. because the pixelclock is out of range of the hardware
-capabilities), then the driver fills in whatever timings it could find
-and returns ``ERANGE``. In that case the application can call
-:ref:`VIDIOC_DV_TIMINGS_CAP` to compare the
-found timings with the hardware's capabilities in order to give more
-precise feedback to the user.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-ENODATA
-    Digital video timings are not supported for this input or output.
-
-ENOLINK
-    No timings could be detected because no signal was found.
-
-ENOLCK
-    The signal was unstable and the hardware could not lock on to it.
-
-ERANGE
-    Timings were found, but they are out of range of the hardware
-    capabilities.
diff --git a/Documentation/media/uapi/v4l/vidioc-querybuf.rst b/Documentation/media/uapi/v4l/vidioc-querybuf.rst
deleted file mode 100644
index 7da60b24e8b6..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-querybuf.rst
+++ /dev/null
@@ -1,87 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_QUERYBUF:
-
-*********************
-ioctl VIDIOC_QUERYBUF
-*********************
-
-Name
-====
-
-VIDIOC_QUERYBUF - Query the status of a buffer
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_QUERYBUF, struct v4l2_buffer *argp )
-    :name: VIDIOC_QUERYBUF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_buffer`.
-
-
-Description
-===========
-
-This ioctl is part of the :ref:`streaming <mmap>` I/O method. It can
-be used to query the status of a buffer at any time after buffers have
-been allocated with the :ref:`VIDIOC_REQBUFS` ioctl.
-
-Applications set the ``type`` field of a struct
-:c:type:`v4l2_buffer` to the same buffer type as was
-previously used with struct :c:type:`v4l2_format` ``type``
-and struct :c:type:`v4l2_requestbuffers` ``type``,
-and the ``index`` field. Valid index numbers range from zero to the
-number of buffers allocated with
-:ref:`VIDIOC_REQBUFS` (struct
-:c:type:`v4l2_requestbuffers` ``count``) minus
-one. The ``reserved`` and ``reserved2`` fields must be set to 0. When
-using the :ref:`multi-planar API <planar-apis>`, the ``m.planes``
-field must contain a userspace pointer to an array of struct
-:c:type:`v4l2_plane` and the ``length`` field has to be set
-to the number of elements in that array. After calling
-:ref:`VIDIOC_QUERYBUF` with a pointer to this structure drivers return an
-error code or fill the rest of the structure.
-
-In the ``flags`` field the ``V4L2_BUF_FLAG_MAPPED``,
-``V4L2_BUF_FLAG_PREPARED``, ``V4L2_BUF_FLAG_QUEUED`` and
-``V4L2_BUF_FLAG_DONE`` flags will be valid. The ``memory`` field will be
-set to the current I/O method. For the single-planar API, the
-``m.offset`` contains the offset of the buffer from the start of the
-device memory, the ``length`` field its size. For the multi-planar API,
-fields ``m.mem_offset`` and ``length`` in the ``m.planes`` array
-elements will be used instead and the ``length`` field of struct
-:c:type:`v4l2_buffer` is set to the number of filled-in
-array elements. The driver may or may not set the remaining fields and
-flags, they are meaningless in this context.
-
-The struct :c:type:`v4l2_buffer` structure is specified in
-:ref:`buffer`.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The buffer ``type`` is not supported, or the ``index`` is out of
-    bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-querycap.rst b/Documentation/media/uapi/v4l/vidioc-querycap.rst
deleted file mode 100644
index 5f9930195d62..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-querycap.rst
+++ /dev/null
@@ -1,284 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_QUERYCAP:
-
-*********************
-ioctl VIDIOC_QUERYCAP
-*********************
-
-Name
-====
-
-VIDIOC_QUERYCAP - Query device capabilities
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_QUERYCAP, struct v4l2_capability *argp )
-    :name: VIDIOC_QUERYCAP
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_capability`.
-
-
-Description
-===========
-
-All V4L2 devices support the ``VIDIOC_QUERYCAP`` ioctl. It is used to
-identify kernel devices compatible with this specification and to obtain
-information about driver and hardware capabilities. The ioctl takes a
-pointer to a struct :c:type:`v4l2_capability` which is
-filled by the driver. When the driver is not compatible with this
-specification the ioctl returns an ``EINVAL`` error code.
-
-
-.. tabularcolumns:: |p{1.5cm}|p{2.5cm}|p{13cm}|
-
-.. c:type:: v4l2_capability
-
-.. flat-table:: struct v4l2_capability
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 4 20
-
-    * - __u8
-      - ``driver``\ [16]
-      - Name of the driver, a unique NUL-terminated ASCII string. For
-	example: "bttv". Driver specific applications can use this
-	information to verify the driver identity. It is also useful to
-	work around known bugs, or to identify drivers in error reports.
-
-	Storing strings in fixed sized arrays is bad practice but
-	unavoidable here. Drivers and applications should take precautions
-	to never read or write beyond the end of the array and to make
-	sure the strings are properly NUL-terminated.
-    * - __u8
-      - ``card``\ [32]
-      - Name of the device, a NUL-terminated UTF-8 string. For example:
-	"Yoyodyne TV/FM". One driver may support different brands or
-	models of video hardware. This information is intended for users,
-	for example in a menu of available devices. Since multiple TV
-	cards of the same brand may be installed which are supported by
-	the same driver, this name should be combined with the character
-	device file name (e. g. ``/dev/video2``) or the ``bus_info``
-	string to avoid ambiguities.
-    * - __u8
-      - ``bus_info``\ [32]
-      - Location of the device in the system, a NUL-terminated ASCII
-	string. For example: "PCI:0000:05:06.0". This information is
-	intended for users, to distinguish multiple identical devices. If
-	no such information is available the field must simply count the
-	devices controlled by the driver ("platform:vivi-000"). The
-	bus_info must start with "PCI:" for PCI boards, "PCIe:" for PCI
-	Express boards, "usb-" for USB devices, "I2C:" for i2c devices,
-	"ISA:" for ISA devices, "parport" for parallel port devices and
-	"platform:" for platform devices.
-    * - __u32
-      - ``version``
-      - Version number of the driver.
-
-	Starting with kernel 3.1, the version reported is provided by the
-	V4L2 subsystem following the kernel numbering scheme. However, it
-	may not always return the same version as the kernel if, for
-	example, a stable or distribution-modified kernel uses the V4L2
-	stack from a newer kernel.
-
-	The version number is formatted using the ``KERNEL_VERSION()``
-	macro. For example if the media stack corresponds to the V4L2
-	version shipped with Kernel 4.14, it would be equivalent to:
-    * - :cspan:`2`
-
-	``#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))``
-
-	``__u32 version = KERNEL_VERSION(4, 14, 0);``
-
-	``printf ("Version: %u.%u.%u\\n",``
-
-	``(version >> 16) & 0xFF, (version >> 8) & 0xFF, version & 0xFF);``
-    * - __u32
-      - ``capabilities``
-      - Available capabilities of the physical device as a whole, see
-	:ref:`device-capabilities`. The same physical device can export
-	multiple devices in /dev (e.g. /dev/videoX, /dev/vbiY and
-	/dev/radioZ). The ``capabilities`` field should contain a union of
-	all capabilities available around the several V4L2 devices
-	exported to userspace. For all those devices the ``capabilities``
-	field returns the same set of capabilities. This allows
-	applications to open just one of the devices (typically the video
-	device) and discover whether video, vbi and/or radio are also
-	supported.
-    * - __u32
-      - ``device_caps``
-      - Device capabilities of the opened device, see
-	:ref:`device-capabilities`. Should contain the available
-	capabilities of that specific device node. So, for example,
-	``device_caps`` of a radio device will only contain radio related
-	capabilities and no video or vbi capabilities. This field is only
-	set if the ``capabilities`` field contains the
-	``V4L2_CAP_DEVICE_CAPS`` capability. Only the ``capabilities``
-	field can have the ``V4L2_CAP_DEVICE_CAPS`` capability,
-	``device_caps`` will never set ``V4L2_CAP_DEVICE_CAPS``.
-    * - __u32
-      - ``reserved``\ [3]
-      - Reserved for future extensions. Drivers must set this array to
-	zero.
-
-
-
-.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
-
-.. _device-capabilities:
-
-.. cssclass:: longtable
-
-.. flat-table:: Device Capabilities Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_CAP_VIDEO_CAPTURE``
-      - 0x00000001
-      - The device supports the single-planar API through the
-	:ref:`Video Capture <capture>` interface.
-    * - ``V4L2_CAP_VIDEO_CAPTURE_MPLANE``
-      - 0x00001000
-      - The device supports the :ref:`multi-planar API <planar-apis>`
-	through the :ref:`Video Capture <capture>` interface.
-    * - ``V4L2_CAP_VIDEO_OUTPUT``
-      - 0x00000002
-      - The device supports the single-planar API through the
-	:ref:`Video Output <output>` interface.
-    * - ``V4L2_CAP_VIDEO_OUTPUT_MPLANE``
-      - 0x00002000
-      - The device supports the :ref:`multi-planar API <planar-apis>`
-	through the :ref:`Video Output <output>` interface.
-    * - ``V4L2_CAP_VIDEO_M2M``
-      - 0x00004000
-      - The device supports the single-planar API through the Video
-	Memory-To-Memory interface.
-    * - ``V4L2_CAP_VIDEO_M2M_MPLANE``
-      - 0x00008000
-      - The device supports the :ref:`multi-planar API <planar-apis>`
-	through the Video Memory-To-Memory interface.
-    * - ``V4L2_CAP_VIDEO_OVERLAY``
-      - 0x00000004
-      - The device supports the :ref:`Video Overlay <overlay>`
-	interface. A video overlay device typically stores captured images
-	directly in the video memory of a graphics card, with hardware
-	clipping and scaling.
-    * - ``V4L2_CAP_VBI_CAPTURE``
-      - 0x00000010
-      - The device supports the :ref:`Raw VBI Capture <raw-vbi>`
-	interface, providing Teletext and Closed Caption data.
-    * - ``V4L2_CAP_VBI_OUTPUT``
-      - 0x00000020
-      - The device supports the :ref:`Raw VBI Output <raw-vbi>`
-	interface.
-    * - ``V4L2_CAP_SLICED_VBI_CAPTURE``
-      - 0x00000040
-      - The device supports the :ref:`Sliced VBI Capture <sliced>`
-	interface.
-    * - ``V4L2_CAP_SLICED_VBI_OUTPUT``
-      - 0x00000080
-      - The device supports the :ref:`Sliced VBI Output <sliced>`
-	interface.
-    * - ``V4L2_CAP_RDS_CAPTURE``
-      - 0x00000100
-      - The device supports the :ref:`RDS <rds>` capture interface.
-    * - ``V4L2_CAP_VIDEO_OUTPUT_OVERLAY``
-      - 0x00000200
-      - The device supports the :ref:`Video Output Overlay <osd>` (OSD)
-	interface. Unlike the *Video Overlay* interface, this is a
-	secondary function of video output devices and overlays an image
-	onto an outgoing video signal. When the driver sets this flag, it
-	must clear the ``V4L2_CAP_VIDEO_OVERLAY`` flag and vice
-	versa. [#f1]_
-    * - ``V4L2_CAP_HW_FREQ_SEEK``
-      - 0x00000400
-      - The device supports the
-	:ref:`VIDIOC_S_HW_FREQ_SEEK` ioctl
-	for hardware frequency seeking.
-    * - ``V4L2_CAP_RDS_OUTPUT``
-      - 0x00000800
-      - The device supports the :ref:`RDS <rds>` output interface.
-    * - ``V4L2_CAP_TUNER``
-      - 0x00010000
-      - The device has some sort of tuner to receive RF-modulated video
-	signals. For more information about tuner programming see
-	:ref:`tuner`.
-    * - ``V4L2_CAP_AUDIO``
-      - 0x00020000
-      - The device has audio inputs or outputs. It may or may not support
-	audio recording or playback, in PCM or compressed formats. PCM
-	audio support must be implemented as ALSA or OSS interface. For
-	more information on audio inputs and outputs see :ref:`audio`.
-    * - ``V4L2_CAP_RADIO``
-      - 0x00040000
-      - This is a radio receiver.
-    * - ``V4L2_CAP_MODULATOR``
-      - 0x00080000
-      - The device has some sort of modulator to emit RF-modulated
-	video/audio signals. For more information about modulator
-	programming see :ref:`tuner`.
-    * - ``V4L2_CAP_SDR_CAPTURE``
-      - 0x00100000
-      - The device supports the :ref:`SDR Capture <sdr>` interface.
-    * - ``V4L2_CAP_EXT_PIX_FORMAT``
-      - 0x00200000
-      - The device supports the struct
-	:c:type:`v4l2_pix_format` extended fields.
-    * - ``V4L2_CAP_SDR_OUTPUT``
-      - 0x00400000
-      - The device supports the :ref:`SDR Output <sdr>` interface.
-    * - ``V4L2_CAP_META_CAPTURE``
-      - 0x00800000
-      - The device supports the :ref:`metadata` capture interface.
-    * - ``V4L2_CAP_READWRITE``
-      - 0x01000000
-      - The device supports the :ref:`read() <rw>` and/or
-	:ref:`write() <rw>` I/O methods.
-    * - ``V4L2_CAP_ASYNCIO``
-      - 0x02000000
-      - The device supports the :ref:`asynchronous <async>` I/O methods.
-    * - ``V4L2_CAP_STREAMING``
-      - 0x04000000
-      - The device supports the :ref:`streaming <mmap>` I/O method.
-    * - ``V4L2_CAP_META_OUTPUT``
-      - 0x08000000
-      - The device supports the :ref:`metadata` output interface.
-    * - ``V4L2_CAP_TOUCH``
-      - 0x10000000
-      - This is a touch device.
-    * - ``V4L2_CAP_DEVICE_CAPS``
-      - 0x80000000
-      - The driver fills the ``device_caps`` field. This capability can
-	only appear in the ``capabilities`` field and never in the
-	``device_caps`` field.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-.. [#f1]
-   The struct :c:type:`v4l2_framebuffer` lacks an
-   enum :c:type:`v4l2_buf_type` field, therefore the
-   type of overlay is implied by the driver capabilities.
diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
deleted file mode 100644
index 8971f4cfb16e..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ /dev/null
@@ -1,616 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_QUERYCTRL:
-
-*******************************************************************
-ioctls VIDIOC_QUERYCTRL, VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU
-*******************************************************************
-
-Name
-====
-
-VIDIOC_QUERYCTRL - VIDIOC_QUERY_EXT_CTRL - VIDIOC_QUERYMENU - Enumerate controls and menu control items
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, int VIDIOC_QUERYCTRL, struct v4l2_queryctrl *argp )
-    :name: VIDIOC_QUERYCTRL
-
-.. c:function:: int ioctl( int fd, VIDIOC_QUERY_EXT_CTRL, struct v4l2_query_ext_ctrl *argp )
-    :name: VIDIOC_QUERY_EXT_CTRL
-
-.. c:function:: int ioctl( int fd, VIDIOC_QUERYMENU, struct v4l2_querymenu *argp )
-    :name: VIDIOC_QUERYMENU
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_queryctrl`, :c:type:`v4l2_query_ext_ctrl`
-    or :c:type:`v4l2_querymenu` (depending on the ioctl).
-
-
-Description
-===========
-
-To query the attributes of a control applications set the ``id`` field
-of a struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` and call the
-``VIDIOC_QUERYCTRL`` ioctl with a pointer to this structure. The driver
-fills the rest of the structure or returns an ``EINVAL`` error code when the
-``id`` is invalid.
-
-It is possible to enumerate controls by calling ``VIDIOC_QUERYCTRL``
-with successive ``id`` values starting from ``V4L2_CID_BASE`` up to and
-exclusive ``V4L2_CID_LASTP1``. Drivers may return ``EINVAL`` if a control in
-this range is not supported. Further applications can enumerate private
-controls, which are not defined in this specification, by starting at
-``V4L2_CID_PRIVATE_BASE`` and incrementing ``id`` until the driver
-returns ``EINVAL``.
-
-In both cases, when the driver sets the ``V4L2_CTRL_FLAG_DISABLED`` flag
-in the ``flags`` field this control is permanently disabled and should
-be ignored by the application. [#f1]_
-
-When the application ORs ``id`` with ``V4L2_CTRL_FLAG_NEXT_CTRL`` the
-driver returns the next supported non-compound control, or ``EINVAL`` if
-there is none. In addition, the ``V4L2_CTRL_FLAG_NEXT_COMPOUND`` flag
-can be specified to enumerate all compound controls (i.e. controls with
-type ≥ ``V4L2_CTRL_COMPOUND_TYPES`` and/or array control, in other words
-controls that contain more than one value). Specify both
-``V4L2_CTRL_FLAG_NEXT_CTRL`` and ``V4L2_CTRL_FLAG_NEXT_COMPOUND`` in
-order to enumerate all controls, compound or not. Drivers which do not
-support these flags yet always return ``EINVAL``.
-
-The ``VIDIOC_QUERY_EXT_CTRL`` ioctl was introduced in order to better
-support controls that can use compound types, and to expose additional
-control information that cannot be returned in struct
-:ref:`v4l2_queryctrl <v4l2-queryctrl>` since that structure is full.
-
-``VIDIOC_QUERY_EXT_CTRL`` is used in the same way as
-``VIDIOC_QUERYCTRL``, except that the ``reserved`` array must be zeroed
-as well.
-
-Additional information is required for menu controls: the names of the
-menu items. To query them applications set the ``id`` and ``index``
-fields of struct :ref:`v4l2_querymenu <v4l2-querymenu>` and call the
-``VIDIOC_QUERYMENU`` ioctl with a pointer to this structure. The driver
-fills the rest of the structure or returns an ``EINVAL`` error code when the
-``id`` or ``index`` is invalid. Menu items are enumerated by calling
-``VIDIOC_QUERYMENU`` with successive ``index`` values from struct
-:ref:`v4l2_queryctrl <v4l2-queryctrl>` ``minimum`` to ``maximum``,
-inclusive.
-
-.. note::
-
-   It is possible for ``VIDIOC_QUERYMENU`` to return
-   an ``EINVAL`` error code for some indices between ``minimum`` and
-   ``maximum``. In that case that particular menu item is not supported by
-   this driver. Also note that the ``minimum`` value is not necessarily 0.
-
-See also the examples in :ref:`control`.
-
-
-.. tabularcolumns:: |p{1.2cm}|p{3.6cm}|p{12.7cm}|
-
-.. _v4l2-queryctrl:
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_queryctrl
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``id``
-      - Identifies the control, set by the application. See
-	:ref:`control-id` for predefined IDs. When the ID is ORed with
-	V4L2_CTRL_FLAG_NEXT_CTRL the driver clears the flag and
-	returns the first control with a higher ID. Drivers which do not
-	support this flag yet always return an ``EINVAL`` error code.
-    * - __u32
-      - ``type``
-      - Type of control, see :c:type:`v4l2_ctrl_type`.
-    * - __u8
-      - ``name``\ [32]
-      - Name of the control, a NUL-terminated ASCII string. This
-	information is intended for the user.
-    * - __s32
-      - ``minimum``
-      - Minimum value, inclusive. This field gives a lower bound for the
-	control. See enum :c:type:`v4l2_ctrl_type` how
-	the minimum value is to be used for each possible control type.
-	Note that this a signed 32-bit value.
-    * - __s32
-      - ``maximum``
-      - Maximum value, inclusive. This field gives an upper bound for the
-	control. See enum :c:type:`v4l2_ctrl_type` how
-	the maximum value is to be used for each possible control type.
-	Note that this a signed 32-bit value.
-    * - __s32
-      - ``step``
-      - This field gives a step size for the control. See enum
-	:c:type:`v4l2_ctrl_type` how the step value is
-	to be used for each possible control type. Note that this an
-	unsigned 32-bit value.
-
-	Generally drivers should not scale hardware control values. It may
-	be necessary for example when the ``name`` or ``id`` imply a
-	particular unit and the hardware actually accepts only multiples
-	of said unit. If so, drivers must take care values are properly
-	rounded when scaling, such that errors will not accumulate on
-	repeated read-write cycles.
-
-	This field gives the smallest change of an integer control
-	actually affecting hardware. Often the information is needed when
-	the user can change controls by keyboard or GUI buttons, rather
-	than a slider. When for example a hardware register accepts values
-	0-511 and the driver reports 0-65535, step should be 128.
-
-	Note that although signed, the step value is supposed to be always
-	positive.
-    * - __s32
-      - ``default_value``
-      - The default value of a ``V4L2_CTRL_TYPE_INTEGER``, ``_BOOLEAN``,
-	``_BITMASK``, ``_MENU`` or ``_INTEGER_MENU`` control. Not valid
-	for other types of controls.
-
-	.. note::
-
-	   Drivers reset controls to their default value only when
-	   the driver is first loaded, never afterwards.
-    * - __u32
-      - ``flags``
-      - Control flags, see :ref:`control-flags`.
-    * - __u32
-      - ``reserved``\ [2]
-      - Reserved for future extensions. Drivers must set the array to
-	zero.
-
-
-
-.. tabularcolumns:: |p{1.2cm}|p{5.0cm}|p{11.3cm}|
-
-.. _v4l2-query-ext-ctrl:
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_query_ext_ctrl
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``id``
-      - Identifies the control, set by the application. See
-	:ref:`control-id` for predefined IDs. When the ID is ORed with
-	``V4L2_CTRL_FLAG_NEXT_CTRL`` the driver clears the flag and
-	returns the first non-compound control with a higher ID. When the
-	ID is ORed with ``V4L2_CTRL_FLAG_NEXT_COMPOUND`` the driver clears
-	the flag and returns the first compound control with a higher ID.
-	Set both to get the first control (compound or not) with a higher
-	ID.
-    * - __u32
-      - ``type``
-      - Type of control, see :c:type:`v4l2_ctrl_type`.
-    * - char
-      - ``name``\ [32]
-      - Name of the control, a NUL-terminated ASCII string. This
-	information is intended for the user.
-    * - __s64
-      - ``minimum``
-      - Minimum value, inclusive. This field gives a lower bound for the
-	control. See enum :c:type:`v4l2_ctrl_type` how
-	the minimum value is to be used for each possible control type.
-	Note that this a signed 64-bit value.
-    * - __s64
-      - ``maximum``
-      - Maximum value, inclusive. This field gives an upper bound for the
-	control. See enum :c:type:`v4l2_ctrl_type` how
-	the maximum value is to be used for each possible control type.
-	Note that this a signed 64-bit value.
-    * - __u64
-      - ``step``
-      - This field gives a step size for the control. See enum
-	:c:type:`v4l2_ctrl_type` how the step value is
-	to be used for each possible control type. Note that this an
-	unsigned 64-bit value.
-
-	Generally drivers should not scale hardware control values. It may
-	be necessary for example when the ``name`` or ``id`` imply a
-	particular unit and the hardware actually accepts only multiples
-	of said unit. If so, drivers must take care values are properly
-	rounded when scaling, such that errors will not accumulate on
-	repeated read-write cycles.
-
-	This field gives the smallest change of an integer control
-	actually affecting hardware. Often the information is needed when
-	the user can change controls by keyboard or GUI buttons, rather
-	than a slider. When for example a hardware register accepts values
-	0-511 and the driver reports 0-65535, step should be 128.
-    * - __s64
-      - ``default_value``
-      - The default value of a ``V4L2_CTRL_TYPE_INTEGER``, ``_INTEGER64``,
-	``_BOOLEAN``, ``_BITMASK``, ``_MENU``, ``_INTEGER_MENU``, ``_U8``
-	or ``_U16`` control. Not valid for other types of controls.
-
-	.. note::
-
-	   Drivers reset controls to their default value only when
-	   the driver is first loaded, never afterwards.
-    * - __u32
-      - ``flags``
-      - Control flags, see :ref:`control-flags`.
-    * - __u32
-      - ``elem_size``
-      - The size in bytes of a single element of the array. Given a char
-	pointer ``p`` to a 3-dimensional array you can find the position
-	of cell ``(z, y, x)`` as follows:
-	``p + ((z * dims[1] + y) * dims[0] + x) * elem_size``.
-	``elem_size`` is always valid, also when the control isn't an
-	array. For string controls ``elem_size`` is equal to
-	``maximum + 1``.
-    * - __u32
-      - ``elems``
-      - The number of elements in the N-dimensional array. If this control
-	is not an array, then ``elems`` is 1. The ``elems`` field can
-	never be 0.
-    * - __u32
-      - ``nr_of_dims``
-      - The number of dimension in the N-dimensional array. If this
-	control is not an array, then this field is 0.
-    * - __u32
-      - ``dims[V4L2_CTRL_MAX_DIMS]``
-      - The size of each dimension. The first ``nr_of_dims`` elements of
-	this array must be non-zero, all remaining elements must be zero.
-    * - __u32
-      - ``reserved``\ [32]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-
-
-
-.. tabularcolumns:: |p{1.2cm}|p{1.0cm}|p{1.7cm}|p{13.0cm}|
-
-.. _v4l2-querymenu:
-
-.. flat-table:: struct v4l2_querymenu
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``id``
-      - Identifies the control, set by the application from the respective
-	struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` ``id``.
-    * - __u32
-      - ``index``
-      - Index of the menu item, starting at zero, set by the application.
-    * - union {
-      - (anonymous)
-    * - __u8
-      - ``name``\ [32]
-      - Name of the menu item, a NUL-terminated ASCII string. This
-	information is intended for the user. This field is valid for
-	``V4L2_CTRL_TYPE_MENU`` type controls.
-    * - __s64
-      - ``value``
-      - Value of the integer menu item. This field is valid for
-	``V4L2_CTRL_TYPE_INTEGER_MENU`` type controls.
-    * - }
-      -
-    * - __u32
-      - ``reserved``
-      - Reserved for future extensions. Drivers must set the array to
-	zero.
-
-
-
-.. tabularcolumns:: |p{5.8cm}|p{1.4cm}|p{1.0cm}|p{1.4cm}|p{6.9cm}|
-
-.. c:type:: v4l2_ctrl_type
-
-.. cssclass:: longtable
-
-.. flat-table:: enum v4l2_ctrl_type
-    :header-rows:  1
-    :stub-columns: 0
-    :widths:       30 5 5 5 55
-
-    * - Type
-      - ``minimum``
-      - ``step``
-      - ``maximum``
-      - Description
-    * - ``V4L2_CTRL_TYPE_INTEGER``
-      - any
-      - any
-      - any
-      - An integer-valued control ranging from minimum to maximum
-	inclusive. The step value indicates the increment between values.
-    * - ``V4L2_CTRL_TYPE_BOOLEAN``
-      - 0
-      - 1
-      - 1
-      - A boolean-valued control. Zero corresponds to "disabled", and one
-	means "enabled".
-    * - ``V4L2_CTRL_TYPE_MENU``
-      - ≥ 0
-      - 1
-      - N-1
-      - The control has a menu of N choices. The names of the menu items
-	can be enumerated with the ``VIDIOC_QUERYMENU`` ioctl.
-    * - ``V4L2_CTRL_TYPE_INTEGER_MENU``
-      - ≥ 0
-      - 1
-      - N-1
-      - The control has a menu of N choices. The values of the menu items
-	can be enumerated with the ``VIDIOC_QUERYMENU`` ioctl. This is
-	similar to ``V4L2_CTRL_TYPE_MENU`` except that instead of strings,
-	the menu items are signed 64-bit integers.
-    * - ``V4L2_CTRL_TYPE_BITMASK``
-      - 0
-      - n/a
-      - any
-      - A bitmask field. The maximum value is the set of bits that can be
-	used, all other bits are to be 0. The maximum value is interpreted
-	as a __u32, allowing the use of bit 31 in the bitmask.
-    * - ``V4L2_CTRL_TYPE_BUTTON``
-      - 0
-      - 0
-      - 0
-      - A control which performs an action when set. Drivers must ignore
-	the value passed with ``VIDIOC_S_CTRL`` and return an ``EACCES`` error
-	code on a ``VIDIOC_G_CTRL`` attempt.
-    * - ``V4L2_CTRL_TYPE_INTEGER64``
-      - any
-      - any
-      - any
-      - A 64-bit integer valued control. Minimum, maximum and step size
-	cannot be queried using ``VIDIOC_QUERYCTRL``. Only
-	``VIDIOC_QUERY_EXT_CTRL`` can retrieve the 64-bit min/max/step
-	values, they should be interpreted as n/a when using
-	``VIDIOC_QUERYCTRL``.
-    * - ``V4L2_CTRL_TYPE_STRING``
-      - ≥ 0
-      - ≥ 1
-      - ≥ 0
-      - The minimum and maximum string lengths. The step size means that
-	the string must be (minimum + N * step) characters long for N ≥ 0.
-	These lengths do not include the terminating zero, so in order to
-	pass a string of length 8 to
-	:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` you need to
-	set the ``size`` field of struct
-	:c:type:`v4l2_ext_control` to 9. For
-	:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` you can set
-	the ``size`` field to ``maximum`` + 1. Which character encoding is
-	used will depend on the string control itself and should be part
-	of the control documentation.
-    * - ``V4L2_CTRL_TYPE_CTRL_CLASS``
-      - n/a
-      - n/a
-      - n/a
-      - This is not a control. When ``VIDIOC_QUERYCTRL`` is called with a
-	control ID equal to a control class code (see :ref:`ctrl-class`)
-	+ 1, the ioctl returns the name of the control class and this
-	control type. Older drivers which do not support this feature
-	return an ``EINVAL`` error code.
-    * - ``V4L2_CTRL_TYPE_U8``
-      - any
-      - any
-      - any
-      - An unsigned 8-bit valued control ranging from minimum to maximum
-	inclusive. The step value indicates the increment between values.
-    * - ``V4L2_CTRL_TYPE_U16``
-      - any
-      - any
-      - any
-      - An unsigned 16-bit valued control ranging from minimum to maximum
-	inclusive. The step value indicates the increment between values.
-    * - ``V4L2_CTRL_TYPE_U32``
-      - any
-      - any
-      - any
-      - An unsigned 32-bit valued control ranging from minimum to maximum
-	inclusive. The step value indicates the increment between values.
-    * - ``V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_mpeg2_slice_params`, containing MPEG-2
-	slice parameters for stateless video decoders.
-    * - ``V4L2_CTRL_TYPE_MPEG2_QUANTIZATION``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_mpeg2_quantization`, containing MPEG-2
-	quantization matrices for stateless video decoders.
-    * - ``V4L2_CTRL_TYPE_AREA``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_area`, containing the width and the height
-        of a rectangular area. Units depend on the use case.
-    * - ``V4L2_CTRL_TYPE_H264_SPS``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_h264_sps`, containing H264
-	sequence parameters for stateless video decoders.
-    * - ``V4L2_CTRL_TYPE_H264_PPS``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_h264_pps`, containing H264
-	picture parameters for stateless video decoders.
-    * - ``V4L2_CTRL_TYPE_H264_SCALING_MATRIX``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_h264_scaling_matrix`, containing H264
-	scaling matrices for stateless video decoders.
-    * - ``V4L2_CTRL_TYPE_H264_SLICE_PARAMS``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_h264_slice_params`, containing H264
-	slice parameters for stateless video decoders.
-    * - ``V4L2_CTRL_TYPE_H264_DECODE_PARAMS``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_h264_decode_params`, containing H264
-	decode parameters for stateless video decoders.
-    * - ``V4L2_CTRL_TYPE_HEVC_SPS``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_hevc_sps`, containing HEVC Sequence
-	Parameter Set for stateless video decoders.
-    * - ``V4L2_CTRL_TYPE_HEVC_PPS``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_hevc_pps`, containing HEVC Picture
-	Parameter Set for stateless video decoders.
-    * - ``V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS``
-      - n/a
-      - n/a
-      - n/a
-      - A struct :c:type:`v4l2_ctrl_hevc_slice_params`, containing HEVC
-	slice parameters for stateless video decoders.
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _control-flags:
-
-.. cssclass:: longtable
-
-.. flat-table:: Control Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_CTRL_FLAG_DISABLED``
-      - 0x0001
-      - This control is permanently disabled and should be ignored by the
-	application. Any attempt to change the control will result in an
-	``EINVAL`` error code.
-    * - ``V4L2_CTRL_FLAG_GRABBED``
-      - 0x0002
-      - This control is temporarily unchangeable, for example because
-	another application took over control of the respective resource.
-	Such controls may be displayed specially in a user interface.
-	Attempts to change the control may result in an ``EBUSY`` error code.
-    * - ``V4L2_CTRL_FLAG_READ_ONLY``
-      - 0x0004
-      - This control is permanently readable only. Any attempt to change
-	the control will result in an ``EINVAL`` error code.
-    * - ``V4L2_CTRL_FLAG_UPDATE``
-      - 0x0008
-      - A hint that changing this control may affect the value of other
-	controls within the same control class. Applications should update
-	their user interface accordingly.
-    * - ``V4L2_CTRL_FLAG_INACTIVE``
-      - 0x0010
-      - This control is not applicable to the current configuration and
-	should be displayed accordingly in a user interface. For example
-	the flag may be set on a MPEG audio level 2 bitrate control when
-	MPEG audio encoding level 1 was selected with another control.
-    * - ``V4L2_CTRL_FLAG_SLIDER``
-      - 0x0020
-      - A hint that this control is best represented as a slider-like
-	element in a user interface.
-    * - ``V4L2_CTRL_FLAG_WRITE_ONLY``
-      - 0x0040
-      - This control is permanently writable only. Any attempt to read the
-	control will result in an ``EACCES`` error code error code. This flag
-	is typically present for relative controls or action controls
-	where writing a value will cause the device to carry out a given
-	action (e. g. motor control) but no meaningful value can be
-	returned.
-    * - ``V4L2_CTRL_FLAG_VOLATILE``
-      - 0x0080
-      - This control is volatile, which means that the value of the
-	control changes continuously. A typical example would be the
-	current gain value if the device is in auto-gain mode. In such a
-	case the hardware calculates the gain value based on the lighting
-	conditions which can change over time.
-
-	.. note::
-
-	   Setting a new value for a volatile control will be ignored
-	   unless
-	   :ref:`V4L2_CTRL_FLAG_EXECUTE_ON_WRITE <FLAG_EXECUTE_ON_WRITE>`
-	   is also set.
-	   Setting a new value for a volatile control will *never* trigger a
-	   :ref:`V4L2_EVENT_CTRL_CH_VALUE <ctrl-changes-flags>` event.
-    * - ``V4L2_CTRL_FLAG_HAS_PAYLOAD``
-      - 0x0100
-      - This control has a pointer type, so its value has to be accessed
-	using one of the pointer fields of struct
-	:c:type:`v4l2_ext_control`. This flag is set
-	for controls that are an array, string, or have a compound type.
-	In all cases you have to set a pointer to memory containing the
-	payload of the control.
-    * .. _FLAG_EXECUTE_ON_WRITE:
-
-      - ``V4L2_CTRL_FLAG_EXECUTE_ON_WRITE``
-      - 0x0200
-      - The value provided to the control will be propagated to the driver
-	even if it remains constant. This is required when the control
-	represents an action on the hardware. For example: clearing an
-	error flag or triggering the flash. All the controls of the type
-	``V4L2_CTRL_TYPE_BUTTON`` have this flag set.
-    * .. _FLAG_MODIFY_LAYOUT:
-
-      - ``V4L2_CTRL_FLAG_MODIFY_LAYOUT``
-      - 0x0400
-      - Changing this control value may modify the layout of the
-        buffer (for video devices) or the media bus format (for sub-devices).
-
-	A typical example would be the ``V4L2_CID_ROTATE`` control.
-
-	Note that typically controls with this flag will also set the
-	``V4L2_CTRL_FLAG_GRABBED`` flag when buffers are allocated or
-	streaming is in progress since most drivers do not support changing
-	the format in that case.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` ``id`` is
-    invalid. The struct :ref:`v4l2_querymenu <v4l2-querymenu>` ``id``
-    is invalid or ``index`` is out of range (less than ``minimum`` or
-    greater than ``maximum``) or this particular menu item is not
-    supported by the driver.
-
-EACCES
-    An attempt was made to read a write-only control.
-
-.. [#f1]
-   ``V4L2_CTRL_FLAG_DISABLED`` was intended for two purposes: Drivers
-   can skip predefined controls not supported by the hardware (although
-   returning ``EINVAL`` would do as well), or disable predefined and private
-   controls after hardware detection without the trouble of reordering
-   control arrays and indices (``EINVAL`` cannot be used to skip private
-   controls because it would prematurely end the enumeration).
diff --git a/Documentation/media/uapi/v4l/vidioc-querystd.rst b/Documentation/media/uapi/v4l/vidioc-querystd.rst
deleted file mode 100644
index d8cf28274cfc..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-querystd.rst
+++ /dev/null
@@ -1,77 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_QUERYSTD:
-
-*********************************************
-ioctl VIDIOC_QUERYSTD, VIDIOC_SUBDEV_QUERYSTD
-*********************************************
-
-Name
-====
-
-VIDIOC_QUERYSTD - VIDIOC_SUBDEV_QUERYSTD - Sense the video standard received by the current input
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_QUERYSTD, v4l2_std_id *argp )
-    :name: VIDIOC_QUERYSTD
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_QUERYSTD, v4l2_std_id *argp )
-    :name: VIDIOC_SUBDEV_QUERYSTD
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to :c:type:`v4l2_std_id`.
-
-
-Description
-===========
-
-The hardware may be able to detect the current video standard
-automatically. To do so, applications call :ref:`VIDIOC_QUERYSTD` with a
-pointer to a :ref:`v4l2_std_id <v4l2-std-id>` type. The driver
-stores here a set of candidates, this can be a single flag or a set of
-supported standards if for example the hardware can only distinguish
-between 50 and 60 Hz systems. If no signal was detected, then the driver
-will return V4L2_STD_UNKNOWN. When detection is not possible or fails,
-the set must contain all standards supported by the current video input
-or output.
-
-.. note::
-
-   Drivers shall *not* switch the video standard
-   automatically if a new video standard is detected. Instead, drivers
-   should send the ``V4L2_EVENT_SOURCE_CHANGE`` event (if they support
-   this) and expect that userspace will take action by calling
-   :ref:`VIDIOC_QUERYSTD`. The reason is that a new video standard can mean
-   different buffer sizes as well, and you cannot change buffer sizes on
-   the fly. In general, applications that receive the Source Change event
-   will have to call :ref:`VIDIOC_QUERYSTD`, and if the detected video
-   standard is valid they will have to stop streaming, set the new
-   standard, allocate new buffers and start streaming again.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-ENODATA
-    Standard video timings are not supported for this input or output.
diff --git a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst
deleted file mode 100644
index d0c643db477a..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst
+++ /dev/null
@@ -1,169 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_REQBUFS:
-
-********************
-ioctl VIDIOC_REQBUFS
-********************
-
-Name
-====
-
-VIDIOC_REQBUFS - Initiate Memory Mapping, User Pointer I/O or DMA buffer I/O
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_REQBUFS, struct v4l2_requestbuffers *argp )
-    :name: VIDIOC_REQBUFS
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_requestbuffers`.
-
-Description
-===========
-
-This ioctl is used to initiate :ref:`memory mapped <mmap>`,
-:ref:`user pointer <userp>` or :ref:`DMABUF <dmabuf>` based I/O.
-Memory mapped buffers are located in device memory and must be allocated
-with this ioctl before they can be mapped into the application's address
-space. User buffers are allocated by applications themselves, and this
-ioctl is merely used to switch the driver into user pointer I/O mode and
-to setup some internal structures. Similarly, DMABUF buffers are
-allocated by applications through a device driver, and this ioctl only
-configures the driver into DMABUF I/O mode without performing any direct
-allocation.
-
-To allocate device buffers applications initialize all fields of the
-struct :c:type:`v4l2_requestbuffers` structure. They set the ``type``
-field to the respective stream or buffer type, the ``count`` field to
-the desired number of buffers, ``memory`` must be set to the requested
-I/O method and the ``reserved`` array must be zeroed. When the ioctl is
-called with a pointer to this structure the driver will attempt to
-allocate the requested number of buffers and it stores the actual number
-allocated in the ``count`` field. It can be smaller than the number
-requested, even zero, when the driver runs out of free memory. A larger
-number is also possible when the driver requires more buffers to
-function correctly. For example video output requires at least two
-buffers, one displayed and one filled by the application.
-
-When the I/O method is not supported the ioctl returns an ``EINVAL`` error
-code.
-
-Applications can call :ref:`VIDIOC_REQBUFS` again to change the number of
-buffers. Note that if any buffers are still mapped or exported via DMABUF,
-then :ref:`VIDIOC_REQBUFS` can only succeed if the
-``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` capability is set. Otherwise
-:ref:`VIDIOC_REQBUFS` will return the ``EBUSY`` error code.
-If ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` is set, then these buffers are
-orphaned and will be freed when they are unmapped or when the exported DMABUF
-fds are closed. A ``count`` value of zero frees or orphans all buffers, after
-aborting or finishing any DMA in progress, an implicit
-:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`.
-
-
-.. c:type:: v4l2_requestbuffers
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_requestbuffers
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``count``
-      - The number of buffers requested or granted.
-    * - __u32
-      - ``type``
-      - Type of the stream or buffers, this is the same as the struct
-	:c:type:`v4l2_format` ``type`` field. See
-	:c:type:`v4l2_buf_type` for valid values.
-    * - __u32
-      - ``memory``
-      - Applications set this field to ``V4L2_MEMORY_MMAP``,
-	``V4L2_MEMORY_DMABUF`` or ``V4L2_MEMORY_USERPTR``. See
-	:c:type:`v4l2_memory`.
-    * - __u32
-      - ``capabilities``
-      - Set by the driver. If 0, then the driver doesn't support
-        capabilities. In that case all you know is that the driver is
-	guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support
-	other :c:type:`v4l2_memory` types. It will not support any others
-	capabilities.
-
-	If you want to query the capabilities with a minimum of side-effects,
-	then this can be called with ``count`` set to 0, ``memory`` set to
-	``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will
-	free any previously allocated buffers, so this is typically something
-	that will be done at the start of the application.
-    * - __u32
-      - ``reserved``\ [1]
-      - A place holder for future extensions. Drivers and applications
-	must set the array to zero.
-
-.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
-
-.. _v4l2-buf-capabilities:
-.. _V4L2-BUF-CAP-SUPPORTS-MMAP:
-.. _V4L2-BUF-CAP-SUPPORTS-USERPTR:
-.. _V4L2-BUF-CAP-SUPPORTS-DMABUF:
-.. _V4L2-BUF-CAP-SUPPORTS-REQUESTS:
-.. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS:
-.. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF:
-
-.. cssclass:: longtable
-
-.. flat-table:: V4L2 Buffer Capabilities Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_BUF_CAP_SUPPORTS_MMAP``
-      - 0x00000001
-      - This buffer type supports the ``V4L2_MEMORY_MMAP`` streaming mode.
-    * - ``V4L2_BUF_CAP_SUPPORTS_USERPTR``
-      - 0x00000002
-      - This buffer type supports the ``V4L2_MEMORY_USERPTR`` streaming mode.
-    * - ``V4L2_BUF_CAP_SUPPORTS_DMABUF``
-      - 0x00000004
-      - This buffer type supports the ``V4L2_MEMORY_DMABUF`` streaming mode.
-    * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS``
-      - 0x00000008
-      - This buffer type supports :ref:`requests <media-request-api>`.
-    * - ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS``
-      - 0x00000010
-      - The kernel allows calling :ref:`VIDIOC_REQBUFS` while buffers are still
-        mapped or exported via DMABUF. These orphaned buffers will be freed
-        when they are unmapped or when the exported DMABUF fds are closed.
-    * - ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF``
-      - 0x00000020
-      - Only valid for stateless decoders. If set, then userspace can set the
-        ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag to hold off on returning the
-	capture buffer until the OUTPUT timestamp changes.
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The buffer type (``type`` field) or the requested I/O method
-    (``memory``) is not supported.
diff --git a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst
deleted file mode 100644
index 4daec97651f2..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst
+++ /dev/null
@@ -1,147 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_S_HW_FREQ_SEEK:
-
-***************************
-ioctl VIDIOC_S_HW_FREQ_SEEK
-***************************
-
-Name
-====
-
-VIDIOC_S_HW_FREQ_SEEK - Perform a hardware frequency seek
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_S_HW_FREQ_SEEK, struct v4l2_hw_freq_seek *argp )
-    :name: VIDIOC_S_HW_FREQ_SEEK
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_hw_freq_seek`.
-
-
-Description
-===========
-
-Start a hardware frequency seek from the current frequency. To do this
-applications initialize the ``tuner``, ``type``, ``seek_upward``,
-``wrap_around``, ``spacing``, ``rangelow`` and ``rangehigh`` fields, and
-zero out the ``reserved`` array of a struct
-:c:type:`v4l2_hw_freq_seek` and call the
-``VIDIOC_S_HW_FREQ_SEEK`` ioctl with a pointer to this structure.
-
-The ``rangelow`` and ``rangehigh`` fields can be set to a non-zero value
-to tell the driver to search a specific band. If the struct
-:c:type:`v4l2_tuner` ``capability`` field has the
-``V4L2_TUNER_CAP_HWSEEK_PROG_LIM`` flag set, these values must fall
-within one of the bands returned by
-:ref:`VIDIOC_ENUM_FREQ_BANDS`. If the
-``V4L2_TUNER_CAP_HWSEEK_PROG_LIM`` flag is not set, then these values
-must exactly match those of one of the bands returned by
-:ref:`VIDIOC_ENUM_FREQ_BANDS`. If the
-current frequency of the tuner does not fall within the selected band it
-will be clamped to fit in the band before the seek is started.
-
-If an error is returned, then the original frequency will be restored.
-
-This ioctl is supported if the ``V4L2_CAP_HW_FREQ_SEEK`` capability is
-set.
-
-If this ioctl is called from a non-blocking filehandle, then ``EAGAIN``
-error code is returned and no seek takes place.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_hw_freq_seek
-
-.. flat-table:: struct v4l2_hw_freq_seek
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``tuner``
-      - The tuner index number. This is the same value as in the struct
-	:c:type:`v4l2_input` ``tuner`` field and the struct
-	:c:type:`v4l2_tuner` ``index`` field.
-    * - __u32
-      - ``type``
-      - The tuner type. This is the same value as in the struct
-	:c:type:`v4l2_tuner` ``type`` field. See
-	:c:type:`v4l2_tuner_type`
-    * - __u32
-      - ``seek_upward``
-      - If non-zero, seek upward from the current frequency, else seek
-	downward.
-    * - __u32
-      - ``wrap_around``
-      - If non-zero, wrap around when at the end of the frequency range,
-	else stop seeking. The struct :c:type:`v4l2_tuner`
-	``capability`` field will tell you what the hardware supports.
-    * - __u32
-      - ``spacing``
-      - If non-zero, defines the hardware seek resolution in Hz. The
-	driver selects the nearest value that is supported by the device.
-	If spacing is zero a reasonable default value is used.
-    * - __u32
-      - ``rangelow``
-      - If non-zero, the lowest tunable frequency of the band to search in
-	units of 62.5 kHz, or if the struct
-	:c:type:`v4l2_tuner` ``capability`` field has the
-	``V4L2_TUNER_CAP_LOW`` flag set, in units of 62.5 Hz or if the
-	struct :c:type:`v4l2_tuner` ``capability`` field has
-	the ``V4L2_TUNER_CAP_1HZ`` flag set, in units of 1 Hz. If
-	``rangelow`` is zero a reasonable default value is used.
-    * - __u32
-      - ``rangehigh``
-      - If non-zero, the highest tunable frequency of the band to search
-	in units of 62.5 kHz, or if the struct
-	:c:type:`v4l2_tuner` ``capability`` field has the
-	``V4L2_TUNER_CAP_LOW`` flag set, in units of 62.5 Hz or if the
-	struct :c:type:`v4l2_tuner` ``capability`` field has
-	the ``V4L2_TUNER_CAP_1HZ`` flag set, in units of 1 Hz. If
-	``rangehigh`` is zero a reasonable default value is used.
-    * - __u32
-      - ``reserved``\ [5]
-      - Reserved for future extensions. Applications must set the array to
-	zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The ``tuner`` index is out of bounds, the ``wrap_around`` value is
-    not supported or one of the values in the ``type``, ``rangelow`` or
-    ``rangehigh`` fields is wrong.
-
-EAGAIN
-    Attempted to call ``VIDIOC_S_HW_FREQ_SEEK`` with the filehandle in
-    non-blocking mode.
-
-ENODATA
-    The hardware seek found no channels.
-
-EBUSY
-    Another hardware seek is already in progress.
diff --git a/Documentation/media/uapi/v4l/vidioc-streamon.rst b/Documentation/media/uapi/v4l/vidioc-streamon.rst
deleted file mode 100644
index 2b5528ec9f89..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-streamon.rst
+++ /dev/null
@@ -1,113 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_STREAMON:
-
-***************************************
-ioctl VIDIOC_STREAMON, VIDIOC_STREAMOFF
-***************************************
-
-Name
-====
-
-VIDIOC_STREAMON - VIDIOC_STREAMOFF - Start or stop streaming I/O
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_STREAMON, const int *argp )
-    :name: VIDIOC_STREAMON
-
-.. c:function:: int ioctl( int fd, VIDIOC_STREAMOFF, const int *argp )
-    :name: VIDIOC_STREAMOFF
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to an integer.
-
-Description
-===========
-
-The ``VIDIOC_STREAMON`` and ``VIDIOC_STREAMOFF`` ioctl start and stop
-the capture or output process during streaming
-(:ref:`memory mapping <mmap>`, :ref:`user pointer <userp>` or
-:ref:`DMABUF <dmabuf>`) I/O.
-
-Capture hardware is disabled and no input buffers are filled (if there
-are any empty buffers in the incoming queue) until ``VIDIOC_STREAMON``
-has been called. Output hardware is disabled and no video signal is
-produced until ``VIDIOC_STREAMON`` has been called. The ioctl will
-succeed when at least one output buffer is in the incoming queue.
-
-Memory-to-memory devices will not start until ``VIDIOC_STREAMON`` has
-been called for both the capture and output stream types.
-
-If ``VIDIOC_STREAMON`` fails then any already queued buffers will remain
-queued.
-
-The ``VIDIOC_STREAMOFF`` ioctl, apart of aborting or finishing any DMA
-in progress, unlocks any user pointer buffers locked in physical memory,
-and it removes all buffers from the incoming and outgoing queues. That
-means all images captured but not dequeued yet will be lost, likewise
-all images enqueued for output but not transmitted yet. I/O returns to
-the same state as after calling
-:ref:`VIDIOC_REQBUFS` and can be restarted
-accordingly.
-
-If buffers have been queued with :ref:`VIDIOC_QBUF` and
-``VIDIOC_STREAMOFF`` is called without ever having called
-``VIDIOC_STREAMON``, then those queued buffers will also be removed from
-the incoming queue and all are returned to the same state as after
-calling :ref:`VIDIOC_REQBUFS` and can be restarted
-accordingly.
-
-Both ioctls take a pointer to an integer, the desired buffer or stream
-type. This is the same as struct
-:c:type:`v4l2_requestbuffers` ``type``.
-
-If ``VIDIOC_STREAMON`` is called when streaming is already in progress,
-or if ``VIDIOC_STREAMOFF`` is called when streaming is already stopped,
-then 0 is returned. Nothing happens in the case of ``VIDIOC_STREAMON``,
-but ``VIDIOC_STREAMOFF`` will return queued buffers to their starting
-state as mentioned above.
-
-.. note::
-
-   Applications can be preempted for unknown periods right before
-   or after the ``VIDIOC_STREAMON`` or ``VIDIOC_STREAMOFF`` calls, there is
-   no notion of starting or stopping "now". Buffer timestamps can be used
-   to synchronize with other events.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The buffer ``type`` is not supported, or no buffers have been
-    allocated (memory mapping) or enqueued (output) yet.
-
-EPIPE
-    The driver implements
-    :ref:`pad-level format configuration <pad-level-formats>` and the
-    pipeline configuration is invalid.
-
-ENOLINK
-    The driver implements Media Controller interface and the pipeline
-    link configuration is invalid.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst
deleted file mode 100644
index 6b4bf9ef5606..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst
+++ /dev/null
@@ -1,120 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL:
-
-***************************************
-ioctl VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL
-***************************************
-
-Name
-====
-
-VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL - Enumerate frame intervals
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL, struct v4l2_subdev_frame_interval_enum * argp )
-    :name: VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_subdev_frame_interval_enum`.
-
-
-Description
-===========
-
-This ioctl lets applications enumerate available frame intervals on a
-given sub-device pad. Frame intervals only makes sense for sub-devices
-that can control the frame period on their own. This includes, for
-instance, image sensors and TV tuners.
-
-For the common use case of image sensors, the frame intervals available
-on the sub-device output pad depend on the frame format and size on the
-same pad. Applications must thus specify the desired format and size
-when enumerating frame intervals.
-
-To enumerate frame intervals applications initialize the ``index``,
-``pad``, ``which``, ``code``, ``width`` and ``height`` fields of struct
-:c:type:`v4l2_subdev_frame_interval_enum`
-and call the :ref:`VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL` ioctl with a pointer
-to this structure. Drivers fill the rest of the structure or return an
-EINVAL error code if one of the input fields is invalid. All frame
-intervals are enumerable by beginning at index zero and incrementing by
-one until ``EINVAL`` is returned.
-
-Available frame intervals may depend on the current 'try' formats at
-other pads of the sub-device, as well as on the current active links.
-See :ref:`VIDIOC_SUBDEV_G_FMT` for more
-information about the try formats.
-
-Sub-devices that support the frame interval enumeration ioctl should
-implemented it on a single pad only. Its behaviour when supported on
-multiple pads of the same sub-device is not defined.
-
-.. c:type:: v4l2_subdev_frame_interval_enum
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_subdev_frame_interval_enum
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - Number of the format in the enumeration, set by the application.
-    * - __u32
-      - ``pad``
-      - Pad number as reported by the media controller API.
-    * - __u32
-      - ``code``
-      - The media bus format code, as defined in
-	:ref:`v4l2-mbus-format`.
-    * - __u32
-      - ``width``
-      - Frame width, in pixels.
-    * - __u32
-      - ``height``
-      - Frame height, in pixels.
-    * - struct :c:type:`v4l2_fract`
-      - ``interval``
-      - Period, in seconds, between consecutive video frames.
-    * - __u32
-      - ``which``
-      - Frame intervals to be enumerated, from enum
-	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
-    * - __u32
-      - ``reserved``\ [8]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct
-    :c:type:`v4l2_subdev_frame_interval_enum`
-    ``pad`` references a non-existing pad, one of the ``code``,
-    ``width`` or ``height`` fields are invalid for the given pad or the
-    ``index`` field is out of bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst
deleted file mode 100644
index 253b128b194e..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst
+++ /dev/null
@@ -1,125 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_SUBDEV_ENUM_FRAME_SIZE:
-
-***********************************
-ioctl VIDIOC_SUBDEV_ENUM_FRAME_SIZE
-***********************************
-
-Name
-====
-
-VIDIOC_SUBDEV_ENUM_FRAME_SIZE - Enumerate media bus frame sizes
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, struct v4l2_subdev_frame_size_enum * argp )
-    :name: VIDIOC_SUBDEV_ENUM_FRAME_SIZE
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_subdev_frame_size_enum`.
-
-
-Description
-===========
-
-This ioctl allows applications to enumerate all frame sizes supported by
-a sub-device on the given pad for the given media bus format. Supported
-formats can be retrieved with the
-:ref:`VIDIOC_SUBDEV_ENUM_MBUS_CODE`
-ioctl.
-
-To enumerate frame sizes applications initialize the ``pad``, ``which``
-, ``code`` and ``index`` fields of the struct
-:c:type:`v4l2_subdev_mbus_code_enum` and
-call the :ref:`VIDIOC_SUBDEV_ENUM_FRAME_SIZE` ioctl with a pointer to the
-structure. Drivers fill the minimum and maximum frame sizes or return an
-EINVAL error code if one of the input parameters is invalid.
-
-Sub-devices that only support discrete frame sizes (such as most
-sensors) will return one or more frame sizes with identical minimum and
-maximum values.
-
-Not all possible sizes in given [minimum, maximum] ranges need to be
-supported. For instance, a scaler that uses a fixed-point scaling ratio
-might not be able to produce every frame size between the minimum and
-maximum values. Applications must use the
-:ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctl to try the
-sub-device for an exact supported frame size.
-
-Available frame sizes may depend on the current 'try' formats at other
-pads of the sub-device, as well as on the current active links and the
-current values of V4L2 controls. See
-:ref:`VIDIOC_SUBDEV_G_FMT` for more
-information about try formats.
-
-
-.. c:type:: v4l2_subdev_frame_size_enum
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_subdev_frame_size_enum
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``index``
-      - Number of the format in the enumeration, set by the application.
-    * - __u32
-      - ``pad``
-      - Pad number as reported by the media controller API.
-    * - __u32
-      - ``code``
-      - The media bus format code, as defined in
-	:ref:`v4l2-mbus-format`.
-    * - __u32
-      - ``min_width``
-      - Minimum frame width, in pixels.
-    * - __u32
-      - ``max_width``
-      - Maximum frame width, in pixels.
-    * - __u32
-      - ``min_height``
-      - Minimum frame height, in pixels.
-    * - __u32
-      - ``max_height``
-      - Maximum frame height, in pixels.
-    * - __u32
-      - ``which``
-      - Frame sizes to be enumerated, from enum
-	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
-    * - __u32
-      - ``reserved``\ [8]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct
-    :c:type:`v4l2_subdev_frame_size_enum`
-    ``pad`` references a non-existing pad, the ``code`` is invalid for
-    the given pad or the ``index`` field is out of bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst
deleted file mode 100644
index fefe4d7349ee..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst
+++ /dev/null
@@ -1,98 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_SUBDEV_ENUM_MBUS_CODE:
-
-**********************************
-ioctl VIDIOC_SUBDEV_ENUM_MBUS_CODE
-**********************************
-
-Name
-====
-
-VIDIOC_SUBDEV_ENUM_MBUS_CODE - Enumerate media bus formats
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_MBUS_CODE, struct v4l2_subdev_mbus_code_enum * argp )
-    :name: VIDIOC_SUBDEV_ENUM_MBUS_CODE
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_subdev_mbus_code_enum`.
-
-
-Description
-===========
-
-To enumerate media bus formats available at a given sub-device pad
-applications initialize the ``pad``, ``which`` and ``index`` fields of
-struct
-:c:type:`v4l2_subdev_mbus_code_enum` and
-call the :ref:`VIDIOC_SUBDEV_ENUM_MBUS_CODE` ioctl with a pointer to this
-structure. Drivers fill the rest of the structure or return an ``EINVAL``
-error code if either the ``pad`` or ``index`` are invalid. All media bus
-formats are enumerable by beginning at index zero and incrementing by
-one until ``EINVAL`` is returned.
-
-Available media bus formats may depend on the current 'try' formats at
-other pads of the sub-device, as well as on the current active links.
-See :ref:`VIDIOC_SUBDEV_G_FMT` for more
-information about the try formats.
-
-
-.. c:type:: v4l2_subdev_mbus_code_enum
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_subdev_mbus_code_enum
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``pad``
-      - Pad number as reported by the media controller API.
-    * - __u32
-      - ``index``
-      - Number of the format in the enumeration, set by the application.
-    * - __u32
-      - ``code``
-      - The media bus format code, as defined in
-	:ref:`v4l2-mbus-format`.
-    * - __u32
-      - ``which``
-      - Media bus format codes to be enumerated, from enum
-	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
-    * - __u32
-      - ``reserved``\ [8]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EINVAL
-    The struct
-    :c:type:`v4l2_subdev_mbus_code_enum`
-    ``pad`` references a non-existing pad, or the ``index`` field is out
-    of bounds.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst
deleted file mode 100644
index 632ee053accc..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst
+++ /dev/null
@@ -1,125 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_SUBDEV_G_CROP:
-
-************************************************
-ioctl VIDIOC_SUBDEV_G_CROP, VIDIOC_SUBDEV_S_CROP
-************************************************
-
-Name
-====
-
-VIDIOC_SUBDEV_G_CROP - VIDIOC_SUBDEV_S_CROP - Get or set the crop rectangle on a subdev pad
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_CROP, struct v4l2_subdev_crop *argp )
-    :name: VIDIOC_SUBDEV_G_CROP
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_CROP, const struct v4l2_subdev_crop *argp )
-    :name: VIDIOC_SUBDEV_S_CROP
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_subdev_crop`.
-
-
-Description
-===========
-
-.. note::
-
-    This is an :ref:`obsolete` interface and may be removed
-    in the future. It is superseded by
-    :ref:`the selection API <VIDIOC_SUBDEV_G_SELECTION>`.
-
-To retrieve the current crop rectangle applications set the ``pad``
-field of a struct :c:type:`v4l2_subdev_crop` to the
-desired pad number as reported by the media API and the ``which`` field
-to ``V4L2_SUBDEV_FORMAT_ACTIVE``. They then call the
-``VIDIOC_SUBDEV_G_CROP`` ioctl with a pointer to this structure. The
-driver fills the members of the ``rect`` field or returns ``EINVAL`` error
-code if the input arguments are invalid, or if cropping is not supported
-on the given pad.
-
-To change the current crop rectangle applications set both the ``pad``
-and ``which`` fields and all members of the ``rect`` field. They then
-call the ``VIDIOC_SUBDEV_S_CROP`` ioctl with a pointer to this
-structure. The driver verifies the requested crop rectangle, adjusts it
-based on the hardware capabilities and configures the device. Upon
-return the struct :c:type:`v4l2_subdev_crop`
-contains the current format as would be returned by a
-``VIDIOC_SUBDEV_G_CROP`` call.
-
-Applications can query the device capabilities by setting the ``which``
-to ``V4L2_SUBDEV_FORMAT_TRY``. When set, 'try' crop rectangles are not
-applied to the device by the driver, but are mangled exactly as active
-crop rectangles and stored in the sub-device file handle. Two
-applications querying the same sub-device would thus not interact with
-each other.
-
-Drivers must not return an error solely because the requested crop
-rectangle doesn't match the device capabilities. They must instead
-modify the rectangle to match what the hardware can provide. The
-modified format should be as close as possible to the original request.
-
-
-.. c:type:: v4l2_subdev_crop
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_subdev_crop
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``pad``
-      - Pad number as reported by the media framework.
-    * - __u32
-      - ``which``
-      - Crop rectangle to get or set, from enum
-	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
-    * - struct :c:type:`v4l2_rect`
-      - ``rect``
-      - Crop rectangle boundaries, in pixels.
-    * - __u32
-      - ``reserved``\ [8]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EBUSY
-    The crop rectangle can't be changed because the pad is currently
-    busy. This can be caused, for instance, by an active video stream on
-    the pad. The ioctl must not be retried without performing another
-    action to fix the problem first. Only returned by
-    ``VIDIOC_SUBDEV_S_CROP``
-
-EINVAL
-    The struct :c:type:`v4l2_subdev_crop` ``pad``
-    references a non-existing pad, the ``which`` field references a
-    non-existing format, or cropping is not supported on the given
-    subdev pad.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst
deleted file mode 100644
index 472577bd1745..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst
+++ /dev/null
@@ -1,154 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_SUBDEV_G_FMT:
-
-**********************************************
-ioctl VIDIOC_SUBDEV_G_FMT, VIDIOC_SUBDEV_S_FMT
-**********************************************
-
-Name
-====
-
-VIDIOC_SUBDEV_G_FMT - VIDIOC_SUBDEV_S_FMT - Get or set the data format on a subdev pad
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_FMT, struct v4l2_subdev_format *argp )
-    :name: VIDIOC_SUBDEV_G_FMT
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_FMT, struct v4l2_subdev_format *argp )
-    :name: VIDIOC_SUBDEV_S_FMT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_subdev_format`.
-
-
-Description
-===========
-
-These ioctls are used to negotiate the frame format at specific subdev
-pads in the image pipeline.
-
-To retrieve the current format applications set the ``pad`` field of a
-struct :c:type:`v4l2_subdev_format` to the desired
-pad number as reported by the media API and the ``which`` field to
-``V4L2_SUBDEV_FORMAT_ACTIVE``. When they call the
-``VIDIOC_SUBDEV_G_FMT`` ioctl with a pointer to this structure the
-driver fills the members of the ``format`` field.
-
-To change the current format applications set both the ``pad`` and
-``which`` fields and all members of the ``format`` field. When they call
-the ``VIDIOC_SUBDEV_S_FMT`` ioctl with a pointer to this structure the
-driver verifies the requested format, adjusts it based on the hardware
-capabilities and configures the device. Upon return the struct
-:c:type:`v4l2_subdev_format` contains the current
-format as would be returned by a ``VIDIOC_SUBDEV_G_FMT`` call.
-
-Applications can query the device capabilities by setting the ``which``
-to ``V4L2_SUBDEV_FORMAT_TRY``. When set, 'try' formats are not applied
-to the device by the driver, but are changed exactly as active formats
-and stored in the sub-device file handle. Two applications querying the
-same sub-device would thus not interact with each other.
-
-For instance, to try a format at the output pad of a sub-device,
-applications would first set the try format at the sub-device input with
-the ``VIDIOC_SUBDEV_S_FMT`` ioctl. They would then either retrieve the
-default format at the output pad with the ``VIDIOC_SUBDEV_G_FMT`` ioctl,
-or set the desired output pad format with the ``VIDIOC_SUBDEV_S_FMT``
-ioctl and check the returned value.
-
-Try formats do not depend on active formats, but can depend on the
-current links configuration or sub-device controls value. For instance,
-a low-pass noise filter might crop pixels at the frame boundaries,
-modifying its output frame size.
-
-Drivers must not return an error solely because the requested format
-doesn't match the device capabilities. They must instead modify the
-format to match what the hardware can provide. The modified format
-should be as close as possible to the original request.
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_subdev_format
-
-.. flat-table:: struct v4l2_subdev_format
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``pad``
-      - Pad number as reported by the media controller API.
-    * - __u32
-      - ``which``
-      - Format to modified, from enum
-	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
-    * - struct :c:type:`v4l2_mbus_framefmt`
-      - ``format``
-      - Definition of an image format, see :c:type:`v4l2_mbus_framefmt` for
-	details.
-    * - __u32
-      - ``reserved``\ [8]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-
-
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
-.. _v4l2-subdev-format-whence:
-
-.. flat-table:: enum v4l2_subdev_format_whence
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - V4L2_SUBDEV_FORMAT_TRY
-      - 0
-      - Try formats, used for querying device capabilities.
-    * - V4L2_SUBDEV_FORMAT_ACTIVE
-      - 1
-      - Active formats, applied to the hardware.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EBUSY
-    The format can't be changed because the pad is currently busy. This
-    can be caused, for instance, by an active video stream on the pad.
-    The ioctl must not be retried without performing another action to
-    fix the problem first. Only returned by ``VIDIOC_SUBDEV_S_FMT``
-
-EINVAL
-    The struct :c:type:`v4l2_subdev_format`
-    ``pad`` references a non-existing pad, or the ``which`` field
-    references a non-existing format.
-
-
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst
deleted file mode 100644
index 4b1b4bc78bfe..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst
+++ /dev/null
@@ -1,120 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_SUBDEV_G_FRAME_INTERVAL:
-
-********************************************************************
-ioctl VIDIOC_SUBDEV_G_FRAME_INTERVAL, VIDIOC_SUBDEV_S_FRAME_INTERVAL
-********************************************************************
-
-Name
-====
-
-VIDIOC_SUBDEV_G_FRAME_INTERVAL - VIDIOC_SUBDEV_S_FRAME_INTERVAL - Get or set the frame interval on a subdev pad
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_FRAME_INTERVAL, struct v4l2_subdev_frame_interval *argp )
-    :name: VIDIOC_SUBDEV_G_FRAME_INTERVAL
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_FRAME_INTERVAL, struct v4l2_subdev_frame_interval *argp )
-    :name: VIDIOC_SUBDEV_S_FRAME_INTERVAL
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_subdev_frame_interval`.
-
-
-Description
-===========
-
-These ioctls are used to get and set the frame interval at specific
-subdev pads in the image pipeline. The frame interval only makes sense
-for sub-devices that can control the frame period on their own. This
-includes, for instance, image sensors and TV tuners. Sub-devices that
-don't support frame intervals must not implement these ioctls.
-
-To retrieve the current frame interval applications set the ``pad``
-field of a struct
-:c:type:`v4l2_subdev_frame_interval` to
-the desired pad number as reported by the media controller API. When
-they call the ``VIDIOC_SUBDEV_G_FRAME_INTERVAL`` ioctl with a pointer to
-this structure the driver fills the members of the ``interval`` field.
-
-To change the current frame interval applications set both the ``pad``
-field and all members of the ``interval`` field. When they call the
-``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` ioctl with a pointer to this
-structure the driver verifies the requested interval, adjusts it based
-on the hardware capabilities and configures the device. Upon return the
-struct
-:c:type:`v4l2_subdev_frame_interval`
-contains the current frame interval as would be returned by a
-``VIDIOC_SUBDEV_G_FRAME_INTERVAL`` call.
-
-Drivers must not return an error solely because the requested interval
-doesn't match the device capabilities. They must instead modify the
-interval to match what the hardware can provide. The modified interval
-should be as close as possible to the original request.
-
-Changing the frame interval shall never change the format. Changing the
-format, on the other hand, may change the frame interval.
-
-Sub-devices that support the frame interval ioctls should implement them
-on a single pad only. Their behaviour when supported on multiple pads of
-the same sub-device is not defined.
-
-
-.. c:type:: v4l2_subdev_frame_interval
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_subdev_frame_interval
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``pad``
-      - Pad number as reported by the media controller API.
-    * - struct :c:type:`v4l2_fract`
-      - ``interval``
-      - Period, in seconds, between consecutive video frames.
-    * - __u32
-      - ``reserved``\ [9]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EBUSY
-    The frame interval can't be changed because the pad is currently
-    busy. This can be caused, for instance, by an active video stream on
-    the pad. The ioctl must not be retried without performing another
-    action to fix the problem first. Only returned by
-    ``VIDIOC_SUBDEV_S_FRAME_INTERVAL``
-
-EINVAL
-    The struct
-    :c:type:`v4l2_subdev_frame_interval`
-    ``pad`` references a non-existing pad, or the pad doesn't support
-    frame intervals.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst
deleted file mode 100644
index fc73d27e6d74..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst
+++ /dev/null
@@ -1,125 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_SUBDEV_G_SELECTION:
-
-**********************************************************
-ioctl VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION
-**********************************************************
-
-Name
-====
-
-VIDIOC_SUBDEV_G_SELECTION - VIDIOC_SUBDEV_S_SELECTION - Get or set selection rectangles on a subdev pad
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_SELECTION, struct v4l2_subdev_selection *argp )
-    :name: VIDIOC_SUBDEV_G_SELECTION
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_SELECTION, struct v4l2_subdev_selection *argp )
-    :name: VIDIOC_SUBDEV_S_SELECTION
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_subdev_selection`.
-
-
-Description
-===========
-
-The selections are used to configure various image processing
-functionality performed by the subdevs which affect the image size. This
-currently includes cropping, scaling and composition.
-
-The selection API replaces
-:ref:`the old subdev crop API <VIDIOC_SUBDEV_G_CROP>`. All the
-function of the crop API, and more, are supported by the selections API.
-
-See :ref:`subdev` for more information on how each selection target
-affects the image processing pipeline inside the subdevice.
-
-
-Types of selection targets
---------------------------
-
-There are two types of selection targets: actual and bounds. The actual
-targets are the targets which configure the hardware. The BOUNDS target
-will return a rectangle that contain all possible actual rectangles.
-
-
-Discovering supported features
-------------------------------
-
-To discover which targets are supported, the user can perform
-``VIDIOC_SUBDEV_G_SELECTION`` on them. Any unsupported target will
-return ``EINVAL``.
-
-Selection targets and flags are documented in
-:ref:`v4l2-selections-common`.
-
-
-.. c:type:: v4l2_subdev_selection
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
-.. flat-table:: struct v4l2_subdev_selection
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``which``
-      - Active or try selection, from enum
-	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
-    * - __u32
-      - ``pad``
-      - Pad number as reported by the media framework.
-    * - __u32
-      - ``target``
-      - Target selection rectangle. See :ref:`v4l2-selections-common`.
-    * - __u32
-      - ``flags``
-      - Flags. See :ref:`v4l2-selection-flags`.
-    * - struct :c:type:`v4l2_rect`
-      - ``r``
-      - Selection rectangle, in pixels.
-    * - __u32
-      - ``reserved``\ [8]
-      - Reserved for future extensions. Applications and drivers must set
-	the array to zero.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-EBUSY
-    The selection rectangle can't be changed because the pad is
-    currently busy. This can be caused, for instance, by an active video
-    stream on the pad. The ioctl must not be retried without performing
-    another action to fix the problem first. Only returned by
-    ``VIDIOC_SUBDEV_S_SELECTION``
-
-EINVAL
-    The struct :c:type:`v4l2_subdev_selection`
-    ``pad`` references a non-existing pad, the ``which`` field
-    references a non-existing format, or the selection target is not
-    supported on the given subdev pad.
diff --git a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst b/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst
deleted file mode 100644
index a2d3454555ba..000000000000
--- a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst
+++ /dev/null
@@ -1,123 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _VIDIOC_SUBSCRIBE_EVENT:
-.. _VIDIOC_UNSUBSCRIBE_EVENT:
-
-******************************************************
-ioctl VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT
-******************************************************
-
-Name
-====
-
-VIDIOC_SUBSCRIBE_EVENT - VIDIOC_UNSUBSCRIBE_EVENT - Subscribe or unsubscribe event
-
-
-Synopsis
-========
-
-.. c:function:: int ioctl( int fd, VIDIOC_SUBSCRIBE_EVENT, struct v4l2_event_subscription *argp )
-    :name: VIDIOC_SUBSCRIBE_EVENT
-
-.. c:function:: int ioctl( int fd, VIDIOC_UNSUBSCRIBE_EVENT, struct v4l2_event_subscription *argp )
-    :name: VIDIOC_UNSUBSCRIBE_EVENT
-
-
-Arguments
-=========
-
-``fd``
-    File descriptor returned by :ref:`open() <func-open>`.
-
-``argp``
-    Pointer to struct :c:type:`v4l2_event_subscription`.
-
-
-Description
-===========
-
-Subscribe or unsubscribe V4L2 event. Subscribed events are dequeued by
-using the :ref:`VIDIOC_DQEVENT` ioctl.
-
-
-.. tabularcolumns:: |p{4.6cm}|p{4.4cm}|p{8.7cm}|
-
-.. c:type:: v4l2_event_subscription
-
-.. flat-table:: struct v4l2_event_subscription
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 1 2
-
-    * - __u32
-      - ``type``
-      - Type of the event, see :ref:`event-type`.
-
-	.. note::
-
-	   ``V4L2_EVENT_ALL`` can be used with
-	   :ref:`VIDIOC_UNSUBSCRIBE_EVENT <VIDIOC_SUBSCRIBE_EVENT>` for
-	   unsubscribing all events at once.
-    * - __u32
-      - ``id``
-      - ID of the event source. If there is no ID associated with the
-	event source, then set this to 0. Whether or not an event needs an
-	ID depends on the event type.
-    * - __u32
-      - ``flags``
-      - Event flags, see :ref:`event-flags`.
-    * - __u32
-      - ``reserved``\ [5]
-      - Reserved for future extensions. Drivers and applications must set
-	the array to zero.
-
-
-
-.. tabularcolumns:: |p{6.8cm}|p{2.2cm}|p{8.5cm}|
-
-.. _event-flags:
-
-.. flat-table:: Event Flags
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       3 1 4
-
-    * - ``V4L2_EVENT_SUB_FL_SEND_INITIAL``
-      - 0x0001
-      - When this event is subscribed an initial event will be sent
-	containing the current status. This only makes sense for events
-	that are triggered by a status change such as ``V4L2_EVENT_CTRL``.
-	Other events will ignore this flag.
-    * - ``V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK``
-      - 0x0002
-      - If set, then events directly caused by an ioctl will also be sent
-	to the filehandle that called that ioctl. For example, changing a
-	control using :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` will cause
-	a V4L2_EVENT_CTRL to be sent back to that same filehandle.
-	Normally such events are suppressed to prevent feedback loops
-	where an application changes a control to a one value and then
-	another, and then receives an event telling it that that control
-	has changed to the first value.
-
-	Since it can't tell whether that event was caused by another
-	application or by the :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>`
-	call it is hard to decide whether to set the control to the value
-	in the event, or ignore it.
-
-	Think carefully when you set this flag so you won't get into
-	situations like that.
-
-
-Return Value
-============
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/v4l/yuv-formats.rst b/Documentation/media/uapi/v4l/yuv-formats.rst
deleted file mode 100644
index 3b259e31b7a1..000000000000
--- a/Documentation/media/uapi/v4l/yuv-formats.rst
+++ /dev/null
@@ -1,64 +0,0 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/media/uapi/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
-.. _yuv-formats:
-
-***********
-YUV Formats
-***********
-
-YUV is the format native to TV broadcast and composite video signals. It
-separates the brightness information (Y) from the color information (U
-and V or Cb and Cr). The color information consists of red and blue
-*color difference* signals, this way the green component can be
-reconstructed by subtracting from the brightness component. See
-:ref:`colorspaces` for conversion examples. YUV was chosen because
-early television would only transmit brightness information. To add
-color in a way compatible with existing receivers a new signal carrier
-was added to transmit the color difference signals. Secondary in the YUV
-format the U and V components usually have lower resolution than the Y
-component. This is an analog video compression technique taking
-advantage of a property of the human visual system, being more sensitive
-to brightness information.
-
-
-.. toctree::
-    :maxdepth: 1
-
-    pixfmt-packed-yuv
-    pixfmt-grey
-    pixfmt-y10
-    pixfmt-y12
-    pixfmt-y14
-    pixfmt-y10b
-    pixfmt-y10p
-    pixfmt-y16
-    pixfmt-y16-be
-    pixfmt-y8i
-    pixfmt-y12i
-    pixfmt-uv8
-    pixfmt-yuyv
-    pixfmt-uyvy
-    pixfmt-yvyu
-    pixfmt-vyuy
-    pixfmt-y41p
-    pixfmt-yuv420
-    pixfmt-yuv420m
-    pixfmt-yuv422m
-    pixfmt-yuv444m
-    pixfmt-yuv410
-    pixfmt-yuv422p
-    pixfmt-yuv411p
-    pixfmt-nv12
-    pixfmt-nv12m
-    pixfmt-nv12mt
-    pixfmt-nv16
-    pixfmt-nv16m
-    pixfmt-nv24
-    pixfmt-m420
diff --git a/Documentation/media/v4l-drivers/au0828-cardlist.rst b/Documentation/media/v4l-drivers/au0828-cardlist.rst
deleted file mode 100644
index aaaadc934e7a..000000000000
--- a/Documentation/media/v4l-drivers/au0828-cardlist.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-AU0828 cards list
-=================
-
-.. tabularcolumns:: |p{1.4cm}|p{6.5cm}|p{10.0cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - USB IDs
-
-   * - 0
-     - Unknown board
-     -
-
-   * - 1
-     - Hauppauge HVR950Q
-     - 2040:7200, 2040:7210, 2040:7217, 2040:721b, 2040:721e, 2040:721f, 2040:7280, 0fd9:0008, 2040:7260, 2040:7213, 2040:7270
-
-   * - 2
-     - Hauppauge HVR850
-     - 2040:7240
-
-   * - 3
-     - DViCO FusionHDTV USB
-     - 0fe9:d620
-
-   * - 4
-     - Hauppauge HVR950Q rev xxF8
-     - 2040:7201, 2040:7211, 2040:7281
-
-   * - 5
-     - Hauppauge Woodbury
-     - 05e1:0480, 2040:8200
diff --git a/Documentation/media/v4l-drivers/bttv-cardlist.rst b/Documentation/media/v4l-drivers/bttv-cardlist.rst
deleted file mode 100644
index f5806856b5a1..000000000000
--- a/Documentation/media/v4l-drivers/bttv-cardlist.rst
+++ /dev/null
@@ -1,683 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-BTTV cards list
-===============
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - PCI IDs
-
-   * - 0
-     -  *** UNKNOWN/GENERIC ***
-     -
-
-   * - 1
-     - MIRO PCTV
-     -
-
-   * - 2
-     - Hauppauge (bt848)
-     -
-
-   * - 3
-     - STB, Gateway P/N 6000699 (bt848)
-     -
-
-   * - 4
-     - Intel Create and Share PCI/ Smart Video Recorder III
-     -
-
-   * - 5
-     - Diamond DTV2000
-     -
-
-   * - 6
-     - AVerMedia TVPhone
-     -
-
-   * - 7
-     - MATRIX-Vision MV-Delta
-     -
-
-   * - 8
-     - Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26
-     -
-
-   * - 9
-     - IMS/IXmicro TurboTV
-     -
-
-   * - 10
-     - Hauppauge (bt878)
-     - 0070:13eb, 0070:3900, 2636:10b4
-
-   * - 11
-     - MIRO PCTV pro
-     -
-
-   * - 12
-     - ADS Technologies Channel Surfer TV (bt848)
-     -
-
-   * - 13
-     - AVerMedia TVCapture 98
-     - 1461:0002, 1461:0004, 1461:0300
-
-   * - 14
-     - Aimslab Video Highway Xtreme (VHX)
-     -
-
-   * - 15
-     - Zoltrix TV-Max
-     - a1a0:a0fc
-
-   * - 16
-     - Prolink Pixelview PlayTV (bt878)
-     -
-
-   * - 17
-     - Leadtek WinView 601
-     -
-
-   * - 18
-     - AVEC Intercapture
-     -
-
-   * - 19
-     - Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)
-     -
-
-   * - 20
-     - CEI Raffles Card
-     -
-
-   * - 21
-     - Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50
-     -
-
-   * - 22
-     - Askey CPH050/ Phoebe Tv Master + FM
-     - 14ff:3002
-
-   * - 23
-     - Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878
-     - 14c7:0101
-
-   * - 24
-     - Askey CPH05X/06X (bt878) [many vendors]
-     - 144f:3002, 144f:3005, 144f:5000, 14ff:3000
-
-   * - 25
-     - Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar
-     -
-
-   * - 26
-     - Hauppauge WinCam newer (bt878)
-     -
-
-   * - 27
-     - Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50
-     -
-
-   * - 28
-     - Terratec TerraTV+ Version 1.1 (bt878)
-     - 153b:1127, 1852:1852
-
-   * - 29
-     - Imagenation PXC200
-     - 1295:200a
-
-   * - 30
-     - Lifeview FlyVideo 98 LR50
-     - 1f7f:1850
-
-   * - 31
-     - Formac iProTV, Formac ProTV I (bt848)
-     -
-
-   * - 32
-     - Intel Create and Share PCI/ Smart Video Recorder III
-     -
-
-   * - 33
-     - Terratec TerraTValue Version Bt878
-     - 153b:1117, 153b:1118, 153b:1119, 153b:111a, 153b:1134, 153b:5018
-
-   * - 34
-     - Leadtek WinFast 2000/ WinFast 2000 XP
-     - 107d:6606, 107d:6609, 6606:217d, f6ff:fff6
-
-   * - 35
-     - Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II
-     - 1851:1850, 1851:a050
-
-   * - 36
-     - Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner
-     - 1852:1852
-
-   * - 37
-     - Prolink PixelView PlayTV pro
-     -
-
-   * - 38
-     - Askey CPH06X TView99
-     - 144f:3000, 144f:a005, a04f:a0fc
-
-   * - 39
-     - Pinnacle PCTV Studio/Rave
-     - 11bd:0012, bd11:1200, bd11:ff00, 11bd:ff12
-
-   * - 40
-     - STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100
-     - 10b4:2636, 10b4:2645, 121a:3060
-
-   * - 41
-     - AVerMedia TVPhone 98
-     - 1461:0001, 1461:0003
-
-   * - 42
-     - ProVideo PV951
-     - aa0c:146c
-
-   * - 43
-     - Little OnAir TV
-     -
-
-   * - 44
-     - Sigma TVII-FM
-     -
-
-   * - 45
-     - MATRIX-Vision MV-Delta 2
-     -
-
-   * - 46
-     - Zoltrix Genie TV/FM
-     - 15b0:4000, 15b0:400a, 15b0:400d, 15b0:4010, 15b0:4016
-
-   * - 47
-     - Terratec TV/Radio+
-     - 153b:1123
-
-   * - 48
-     - Askey CPH03x/ Dynalink Magic TView
-     -
-
-   * - 49
-     - IODATA GV-BCTV3/PCI
-     - 10fc:4020
-
-   * - 50
-     - Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP
-     -
-
-   * - 51
-     - Eagle Wireless Capricorn2 (bt878A)
-     -
-
-   * - 52
-     - Pinnacle PCTV Studio Pro
-     -
-
-   * - 53
-     - Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS
-     -
-
-   * - 54
-     - Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]
-     -
-
-   * - 55
-     - Askey CPH031/ BESTBUY Easy TV
-     -
-
-   * - 56
-     - Lifeview FlyVideo 98FM LR50
-     - a051:41a0
-
-   * - 57
-     - GrandTec 'Grand Video Capture' (Bt848)
-     - 4344:4142
-
-   * - 58
-     - Askey CPH060/ Phoebe TV Master Only (No FM)
-     -
-
-   * - 59
-     - Askey CPH03x TV Capturer
-     -
-
-   * - 60
-     - Modular Technology MM100PCTV
-     -
-
-   * - 61
-     - AG Electronics GMV1
-     - 15cb:0101
-
-   * - 62
-     - Askey CPH061/ BESTBUY Easy TV (bt878)
-     -
-
-   * - 63
-     - ATI TV-Wonder
-     - 1002:0001
-
-   * - 64
-     - ATI TV-Wonder VE
-     - 1002:0003
-
-   * - 65
-     - Lifeview FlyVideo 2000S LR90
-     -
-
-   * - 66
-     - Terratec TValueRadio
-     - 153b:1135, 153b:ff3b
-
-   * - 67
-     - IODATA GV-BCTV4/PCI
-     - 10fc:4050
-
-   * - 68
-     - 3Dfx VoodooTV FM (Euro)
-     - 10b4:2637
-
-   * - 69
-     - Active Imaging AIMMS
-     -
-
-   * - 70
-     - Prolink Pixelview PV-BT878P+ (Rev.4C,8E)
-     -
-
-   * - 71
-     - Lifeview FlyVideo 98EZ (capture only) LR51
-     - 1851:1851
-
-   * - 72
-     - Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)
-     - 1554:4011
-
-   * - 73
-     - Sensoray 311/611
-     - 6000:0311, 6000:0611
-
-   * - 74
-     - RemoteVision MX (RV605)
-     -
-
-   * - 75
-     - Powercolor MTV878/ MTV878R/ MTV878F
-     -
-
-   * - 76
-     - Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)
-     - 0e11:0079
-
-   * - 77
-     - GrandTec Multi Capture Card (Bt878)
-     -
-
-   * - 78
-     - Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF
-     - 0a01:17de
-
-   * - 79
-     - DSP Design TCVIDEO
-     -
-
-   * - 80
-     - Hauppauge WinTV PVR
-     - 0070:4500
-
-   * - 81
-     - IODATA GV-BCTV5/PCI
-     - 10fc:4070, 10fc:d018
-
-   * - 82
-     - Osprey 100/150 (878)
-     - 0070:ff00
-
-   * - 83
-     - Osprey 100/150 (848)
-     -
-
-   * - 84
-     - Osprey 101 (848)
-     -
-
-   * - 85
-     - Osprey 101/151
-     -
-
-   * - 86
-     - Osprey 101/151 w/ svid
-     -
-
-   * - 87
-     - Osprey 200/201/250/251
-     -
-
-   * - 88
-     - Osprey 200/250
-     - 0070:ff01
-
-   * - 89
-     - Osprey 210/220/230
-     -
-
-   * - 90
-     - Osprey 500
-     - 0070:ff02
-
-   * - 91
-     - Osprey 540
-     - 0070:ff04
-
-   * - 92
-     - Osprey 2000
-     - 0070:ff03
-
-   * - 93
-     - IDS Eagle
-     -
-
-   * - 94
-     - Pinnacle PCTV Sat
-     - 11bd:001c
-
-   * - 95
-     - Formac ProTV II (bt878)
-     -
-
-   * - 96
-     - MachTV
-     -
-
-   * - 97
-     - Euresys Picolo
-     -
-
-   * - 98
-     - ProVideo PV150
-     - aa00:1460, aa01:1461, aa02:1462, aa03:1463, aa04:1464, aa05:1465, aa06:1466, aa07:1467
-
-   * - 99
-     - AD-TVK503
-     -
-
-   * - 100
-     - Hercules Smart TV Stereo
-     -
-
-   * - 101
-     - Pace TV & Radio Card
-     -
-
-   * - 102
-     - IVC-200
-     - 0000:a155, 0001:a155, 0002:a155, 0003:a155, 0100:a155, 0101:a155, 0102:a155, 0103:a155, 0800:a155, 0801:a155, 0802:a155, 0803:a155
-
-   * - 103
-     - Grand X-Guard / Trust 814PCI
-     - 0304:0102
-
-   * - 104
-     - Nebula Electronics DigiTV
-     - 0071:0101
-
-   * - 105
-     - ProVideo PV143
-     - aa00:1430, aa00:1431, aa00:1432, aa00:1433, aa03:1433
-
-   * - 106
-     - PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)
-     -
-
-   * - 107
-     - PHYTEC VD-009-X1 VD-011 Combi (bt878)
-     -
-
-   * - 108
-     - PHYTEC VD-009 MiniDIN (bt878)
-     -
-
-   * - 109
-     - PHYTEC VD-009 Combi (bt878)
-     -
-
-   * - 110
-     - IVC-100
-     - ff00:a132
-
-   * - 111
-     - IVC-120G
-     - ff00:a182, ff01:a182, ff02:a182, ff03:a182, ff04:a182, ff05:a182, ff06:a182, ff07:a182, ff08:a182, ff09:a182, ff0a:a182, ff0b:a182, ff0c:a182, ff0d:a182, ff0e:a182, ff0f:a182
-
-   * - 112
-     - pcHDTV HD-2000 TV
-     - 7063:2000
-
-   * - 113
-     - Twinhan DST + clones
-     - 11bd:0026, 1822:0001, 270f:fc00, 1822:0026
-
-   * - 114
-     - Winfast VC100
-     - 107d:6607
-
-   * - 115
-     - Teppro TEV-560/InterVision IV-560
-     -
-
-   * - 116
-     - SIMUS GVC1100
-     - aa6a:82b2
-
-   * - 117
-     - NGS NGSTV+
-     -
-
-   * - 118
-     - LMLBT4
-     -
-
-   * - 119
-     - Tekram M205 PRO
-     -
-
-   * - 120
-     - Conceptronic CONTVFMi
-     -
-
-   * - 121
-     - Euresys Picolo Tetra
-     - 1805:0105, 1805:0106, 1805:0107, 1805:0108
-
-   * - 122
-     - Spirit TV Tuner
-     -
-
-   * - 123
-     - AVerMedia AVerTV DVB-T 771
-     - 1461:0771
-
-   * - 124
-     - AverMedia AverTV DVB-T 761
-     - 1461:0761
-
-   * - 125
-     - MATRIX Vision Sigma-SQ
-     -
-
-   * - 126
-     - MATRIX Vision Sigma-SLC
-     -
-
-   * - 127
-     - APAC Viewcomp 878(AMAX)
-     -
-
-   * - 128
-     - DViCO FusionHDTV DVB-T Lite
-     - 18ac:db10, 18ac:db11
-
-   * - 129
-     - V-Gear MyVCD
-     -
-
-   * - 130
-     - Super TV Tuner
-     -
-
-   * - 131
-     - Tibet Systems 'Progress DVR' CS16
-     -
-
-   * - 132
-     - Kodicom 4400R (master)
-     -
-
-   * - 133
-     - Kodicom 4400R (slave)
-     -
-
-   * - 134
-     - Adlink RTV24
-     -
-
-   * - 135
-     - DViCO FusionHDTV 5 Lite
-     - 18ac:d500
-
-   * - 136
-     - Acorp Y878F
-     - 9511:1540
-
-   * - 137
-     - Conceptronic CTVFMi v2
-     - 036e:109e
-
-   * - 138
-     - Prolink Pixelview PV-BT878P+ (Rev.2E)
-     -
-
-   * - 139
-     - Prolink PixelView PlayTV MPEG2 PV-M4900
-     -
-
-   * - 140
-     - Osprey 440
-     - 0070:ff07
-
-   * - 141
-     - Asound Skyeye PCTV
-     -
-
-   * - 142
-     - Sabrent TV-FM (bttv version)
-     -
-
-   * - 143
-     - Hauppauge ImpactVCB (bt878)
-     - 0070:13eb
-
-   * - 144
-     - MagicTV
-     -
-
-   * - 145
-     - SSAI Security Video Interface
-     - 4149:5353
-
-   * - 146
-     - SSAI Ultrasound Video Interface
-     - 414a:5353
-
-   * - 147
-     - VoodooTV 200 (USA)
-     - 121a:3000
-
-   * - 148
-     - DViCO FusionHDTV 2
-     - dbc0:d200
-
-   * - 149
-     - Typhoon TV-Tuner PCI (50684)
-     -
-
-   * - 150
-     - Geovision GV-600
-     - 008a:763c
-
-   * - 151
-     - Kozumi KTV-01C
-     -
-
-   * - 152
-     - Encore ENL TV-FM-2
-     - 1000:1801
-
-   * - 153
-     - PHYTEC VD-012 (bt878)
-     -
-
-   * - 154
-     - PHYTEC VD-012-X1 (bt878)
-     -
-
-   * - 155
-     - PHYTEC VD-012-X2 (bt878)
-     -
-
-   * - 156
-     - IVCE-8784
-     - 0000:f050, 0001:f050, 0002:f050, 0003:f050
-
-   * - 157
-     - Geovision GV-800(S) (master)
-     - 800a:763d
-
-   * - 158
-     - Geovision GV-800(S) (slave)
-     - 800b:763d, 800c:763d, 800d:763d
-
-   * - 159
-     - ProVideo PV183
-     - 1830:1540, 1831:1540, 1832:1540, 1833:1540, 1834:1540, 1835:1540, 1836:1540, 1837:1540
-
-   * - 160
-     - Tongwei Video Technology TD-3116
-     - f200:3116
-
-   * - 161
-     - Aposonic W-DVR
-     - 0279:0228
-
-   * - 162
-     - Adlink MPG24
-     -
-
-   * - 163
-     - Bt848 Capture 14MHz
-     -
-
-   * - 164
-     - CyberVision CV06 (SV)
-     -
-
-   * - 165
-     - Kworld V-Stream Xpert TV PVR878
-     -
-
-   * - 166
-     - PCI-8604PW
-     -
diff --git a/Documentation/media/v4l-drivers/bttv.rst b/Documentation/media/v4l-drivers/bttv.rst
deleted file mode 100644
index f956ee264099..000000000000
--- a/Documentation/media/v4l-drivers/bttv.rst
+++ /dev/null
@@ -1,1926 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The bttv driver
-===============
-
-Release notes for bttv
-----------------------
-
-You'll need at least these config options for bttv:
-
-.. code-block:: none
-
-	CONFIG_I2C=m
-	CONFIG_I2C_ALGOBIT=m
-	CONFIG_VIDEO_DEV=m
-
-The latest bttv version is available from http://bytesex.org/bttv/
-
-
-Make bttv work with your card
------------------------------
-
-Just try "modprobe bttv" and see if that works.
-
-If it doesn't bttv likely could not autodetect your card and needs some
-insmod options.  The most important insmod option for bttv is "card=n"
-to select the correct card type.  If you get video but no sound you've
-very likely specified the wrong (or no) card type.  A list of supported
-cards is in CARDLIST.bttv
-
-If bttv takes very long to load (happens sometimes with the cheap
-cards which have no tuner), try adding this to your modules.conf:
-
-.. code-block:: none
-
-	options i2c-algo-bit bit_test=1
-
-For the WinTV/PVR you need one firmware file from the driver CD:
-hcwamc.rbf.  The file is in the pvr45xxx.exe archive (self-extracting
-zip file, unzip can unpack it).  Put it into the /etc/pvr directory or
-use the firm_altera=<path> insmod option to point the driver to the
-location of the file.
-
-If your card isn't listed in CARDLIST.bttv or if you have trouble making
-audio work, you should read the Sound-FAQ.
-
-
-Autodetecting cards
--------------------
-
-bttv uses the PCI Subsystem ID to autodetect the card type.  lspci lists
-the Subsystem ID in the second line, looks like this:
-
-.. code-block:: none
-
-	00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
-		Subsystem: Hauppauge computer works Inc. WinTV/GO
-		Flags: bus master, medium devsel, latency 32, IRQ 5
-		Memory at e2000000 (32-bit, prefetchable) [size=4K]
-
-only bt878-based cards can have a subsystem ID (which does not mean
-that every card really has one).  bt848 cards can't have a Subsystem
-ID and therefore can't be autodetected.  There is a list with the ID's
-in bttv-cards.c (in case you are intrested or want to mail patches
-with updates).
-
-
-Still doesn't work?
--------------------
-
-I do NOT have a lab with 30+ different grabber boards and a
-PAL/NTSC/SECAM test signal generator at home, so I often can't
-reproduce your problems.  This makes debugging very difficult for me.
-If you have some knowledge and spare time, please try to fix this
-yourself (patches very welcome of course...)  You know: The linux
-slogan is "Do it yourself".
-
-There is a mailing list at
-http://vger.kernel.org/vger-lists.html#linux-media
-
-If you have trouble with some specific TV card, try to ask there
-instead of mailing me directly.  The chance that someone with the
-same card listens there is much higher...
-
-For problems with sound:  There are a lot of different systems used
-for TV sound all over the world.  And there are also different chips
-which decode the audio signal.  Reports about sound problems ("stereo
-doesn't work") are pretty useless unless you include some details
-about your hardware and the TV sound scheme used in your country (or
-at least the country you are living in).
-
-Modprobe options
-----------------
-
-Note: "modinfo <module>" prints various information about a kernel
-module, among them a complete and up-to-date list of insmod options.
-This list tends to be outdated because it is updated manually ...
-
-==========================================================================
-
-bttv.o
-
-.. code-block:: none
-
-	the bt848/878 (grabber chip) driver
-
-	insmod args:
-		card=n		card type, see CARDLIST for a list.
-		tuner=n		tuner type, see CARDLIST for a list.
-		radio=0/1	card supports radio
-		pll=0/1/2	pll settings
-			0: don't use PLL
-			1: 28 MHz crystal installed
-			2: 35 MHz crystal installed
-
-		triton1=0/1     for Triton1 (+others) compatibility
-		vsfx=0/1	yet another chipset bug compatibility bit
-				see README.quirks for details on these two.
-
-		bigendian=n	Set the endianness of the gfx framebuffer.
-				Default is native endian.
-		fieldnr=0/1	Count fields.  Some TV descrambling software
-				needs this, for others it only generates
-				50 useless IRQs/sec.  default is 0 (off).
-		autoload=0/1	autoload helper modules (tuner, audio).
-				default is 1 (on).
-		bttv_verbose=0/1/2  verbose level (at insmod time, while
-				looking at the hardware).  default is 1.
-		bttv_debug=0/1	debug messages (for capture).
-				default is 0 (off).
-		irq_debug=0/1	irq handler debug messages.
-				default is 0 (off).
-		gbuffers=2-32	number of capture buffers for mmap'ed capture.
-				default is 4.
-		gbufsize=	size of capture buffers. default and
-				maximum value is 0x208000 (~2MB)
-		no_overlay=0	Enable overlay on broken hardware.  There
-				are some chipsets (SIS for example) which
-				are known to have problems with the PCI DMA
-				push used by bttv.  bttv will disable overlay
-				by default on this hardware to avoid crashes.
-				With this insmod option you can override this.
-		no_overlay=1	Disable overlay. It should be used by broken
-				hardware that doesn't support PCI2PCI direct
-				transfers.
-		automute=0/1	Automatically mutes the sound if there is
-				no TV signal, on by default.  You might try
-				to disable this if you have bad input signal
-				quality which leading to unwanted sound
-				dropouts.
-		chroma_agc=0/1	AGC of chroma signal, off by default.
-		adc_crush=0/1	Luminance ADC crush, on by default.
-		i2c_udelay=     Allow reduce I2C speed. Default is 5 usecs
-				(meaning 66,67 Kbps). The default is the
-				maximum supported speed by kernel bitbang
-				algorithm. You may use lower numbers, if I2C
-				messages are lost (16 is known to work on
-				all supported cards).
-
-		bttv_gpio=0/1
-		gpiomask=
-		audioall=
-		audiomux=
-				See Sound-FAQ for a detailed description.
-
-	remap, card, radio and pll accept up to four comma-separated arguments
-	(for multiple boards).
-
-tuner.o
-
-.. code-block:: none
-
-	The tuner driver.  You need this unless you want to use only
-	with a camera or external tuner ...
-
-	insmod args:
-		debug=1		print some debug info to the syslog
-		type=n		type of the tuner chip. n as follows:
-				see CARDLIST for a complete list.
-		pal=[bdgil]	select PAL variant (used for some tuners
-				only, important for the audio carrier).
-
-tvaudio.o
-
-.. code-block:: none
-
-	new, experimental module which is supported to provide a single
-	driver for all simple i2c audio control chips (tda/tea*).
-
-	insmod args:
-		tda8425  = 1	enable/disable the support for the
-		tda9840  = 1	various chips.
-		tda9850  = 1	The tea6300 can't be autodetected and is
-		tda9855  = 1	therefore off by default, if you have
-		tda9873  = 1	this one on your card (STB uses these)
-		tda9874a = 1	you have to enable it explicitly.
-		tea6300  = 0	The two tda985x chips use the same i2c
-		tea6420  = 1	address and can't be disturgished from
-		pic16c54 = 1	each other, you might have to disable
-				the wrong one.
-		debug = 1	print debug messages
-
-	insmod args for tda9874a:
-		tda9874a_SIF=1/2	select sound IF input pin (1 or 2)
-					(default is pin 1)
-		tda9874a_AMSEL=0/1	auto-mute select for NICAM (default=0)
-					Please read note 3 below!
-		tda9874a_STD=n		select TV sound standard (0..8):
-					0 - A2, B/G
-					1 - A2, M (Korea)
-					2 - A2, D/K (1)
-					3 - A2, D/K (2)
-					4 - A2, D/K (3)
-					5 - NICAM, I
-					6 - NICAM, B/G
-					7 - NICAM, D/K (default)
-					8 - NICAM, L
-
-	Note 1: tda9874a supports both tda9874h (old) and tda9874a (new) chips.
-	Note 2: tda9874h/a and tda9875 (which is supported separately by
-	tda9875.o) use the same i2c address so both modules should not be
-	used at the same time.
-	Note 3: Using tda9874a_AMSEL option depends on your TV card design!
-		AMSEL=0: auto-mute will switch between NICAM sound
-			 and the sound on 1st carrier (i.e. FM mono or AM).
-		AMSEL=1: auto-mute will switch between NICAM sound
-			 and the analog mono input (MONOIN pin).
-	If tda9874a decoder on your card has MONOIN pin not connected, then
-	use only tda9874_AMSEL=0 or don't specify this option at all.
-	For example:
-	  card=65 (FlyVideo 2000S) - set AMSEL=1 or AMSEL=0
-	  card=72 (Prolink PV-BT878P rev.9B) - set AMSEL=0 only
-
-msp3400.o
-
-.. code-block:: none
-
-	The driver for the msp34xx sound processor chips. If you have a
-	stereo card, you probably want to insmod this one.
-
-	insmod args:
-		debug=1/2	print some debug info to the syslog,
-				2 is more verbose.
-		simple=1	Use the "short programming" method.  Newer
-				msp34xx versions support this.  You need this
-				for dbx stereo.  Default is on if supported by
-				the chip.
-		once=1		Don't check the TV-stations Audio mode
-				every few seconds, but only once after
-				channel switches.
-		amsound=1	Audio carrier is AM/NICAM at 6.5 Mhz.  This
-				should improve things for french people, the
-				carrier autoscan seems to work with FM only...
-
-tea6300.o - OBSOLETE (use tvaudio instead)
-
-.. code-block:: none
-
-	The driver for the tea6300 fader chip.  If you have a stereo
-	card and the msp3400.o doesn't work, you might want to try this
-	one.  This chip is seen on most STB TV/FM cards (usually from
-	Gateway OEM sold surplus on auction sites).
-
-	insmod args:
-		debug=1		print some debug info to the syslog.
-
-tda8425.o - OBSOLETE (use tvaudio instead)
-
-.. code-block:: none
-
-	The driver for the tda8425 fader chip.  This driver used to be
-	part of bttv.c, so if your sound used to work but does not
-	anymore, try loading this module.
-
-	insmod args:
-		debug=1		print some debug info to the syslog.
-
-tda985x.o - OBSOLETE (use tvaudio instead)
-
-.. code-block:: none
-
-	The driver for the tda9850/55 audio chips.
-
-	insmod args:
-		debug=1		print some debug info to the syslog.
-		chip=9850/9855	set the chip type.
-
-
-If the box freezes hard with bttv
----------------------------------
-
-It might be a bttv driver bug.  It also might be bad hardware.  It also
-might be something else ...
-
-Just mailing me "bttv freezes" isn't going to help much.  This README
-has a few hints how you can help to pin down the problem.
-
-
-bttv bugs
-~~~~~~~~~
-
-If some version works and another doesn't it is likely to be a driver
-bug.  It is very helpful if you can tell where exactly it broke
-(i.e. the last working and the first broken version).
-
-With a hard freeze you probably doesn't find anything in the logfiles.
-The only way to capture any kernel messages is to hook up a serial
-console and let some terminal application log the messages.  /me uses
-screen.  See Documentation/admin-guide/serial-console.rst for details on setting
-up a serial console.
-
-Read Documentation/admin-guide/bug-hunting.rst to learn how to get any useful
-information out of a register+stack dump printed by the kernel on
-protection faults (so-called "kernel oops").
-
-If you run into some kind of deadlock, you can try to dump a call trace
-for each process using sysrq-t (see Documentation/admin-guide/sysrq.rst).
-This way it is possible to figure where *exactly* some process in "D"
-state is stuck.
-
-I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid
-for some people.  Thus probably a small buglet left somewhere in bttv
-0.7.x.  I have no idea where exactly, it works stable for me and a lot of
-other people.  But in case you have problems with the 0.7.x versions you
-can give 0.8.x a try ...
-
-
-hardware bugs
-~~~~~~~~~~~~~
-
-Some hardware can't deal with PCI-PCI transfers (i.e. grabber => vga).
-Sometimes problems show up with bttv just because of the high load on
-the PCI bus. The bt848/878 chips have a few workarounds for known
-incompatibilities, see README.quirks.
-
-Some folks report that increasing the pci latency helps too,
-althrought I'm not sure whenever this really fixes the problems or
-only makes it less likely to happen.  Both bttv and btaudio have a
-insmod option to set the PCI latency of the device.
-
-Some mainboard have problems to deal correctly with multiple devices
-doing DMA at the same time.  bttv + ide seems to cause this sometimes,
-if this is the case you likely see freezes only with video and hard disk
-access at the same time.  Updating the IDE driver to get the latest and
-greatest workarounds for hardware bugs might fix these problems.
-
-
-other
-~~~~~
-
-If you use some binary-only yunk (like nvidia module) try to reproduce
-the problem without.
-
-IRQ sharing is known to cause problems in some cases.  It works just
-fine in theory and many configurations.  Neverless it might be worth a
-try to shuffle around the PCI cards to give bttv another IRQ or make
-it share the IRQ with some other piece of hardware.  IRQ sharing with
-VGA cards seems to cause trouble sometimes.  I've also seen funny
-effects with bttv sharing the IRQ with the ACPI bridge (and
-apci-enabled kernel).
-
-Bttv quirks
------------
-
-Below is what the bt878 data book says about the PCI bug compatibility
-modes of the bt878 chip.
-
-The triton1 insmod option sets the EN_TBFX bit in the control register.
-The vsfx insmod option does the same for EN_VSFX bit.  If you have
-stability problems you can try if one of these options makes your box
-work solid.
-
-drivers/pci/quirks.c knows about these issues, this way these bits are
-enabled automagically for known-buggy chipsets (look at the kernel
-messages, bttv tells you).
-
-Normal PCI Mode
-~~~~~~~~~~~~~~~
-
-The PCI REQ signal is the logical-or of the incoming function requests.
-The inter-nal GNT[0:1] signals are gated asynchronously with GNT and
-demultiplexed by the audio request signal. Thus the arbiter defaults to
-the video function at power-up and parks there during no requests for
-bus access. This is desirable since the video will request the bus more
-often. However, the audio will have highest bus access priority. Thus
-the audio will have first access to the bus even when issuing a request
-after the video request but before the PCI external arbiter has granted
-access to the Bt879. Neither function can preempt the other once on the
-bus. The duration to empty the entire video PCI FIFO onto the PCI bus is
-very short compared to the bus access latency the audio PCI FIFO can
-tolerate.
-
-
-430FX Compatibility Mode
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-When using the 430FX PCI, the following rules will ensure
-compatibility:
-
- (1) Deassert REQ at the same time as asserting FRAME.
- (2) Do not reassert REQ to request another bus transaction until after
-     finish-ing the previous transaction.
-
-Since the individual bus masters do not have direct control of REQ, a
-simple logical-or of video and audio requests would violate the rules.
-Thus, both the arbiter and the initiator contain 430FX compatibility
-mode logic. To enable 430FX mode, set the EN_TBFX bit as indicated in
-Device Control Register on page 104.
-
-When EN_TBFX is enabled, the arbiter ensures that the two compatibility
-rules are satisfied. Before GNT is asserted by the PCI arbiter, this
-internal arbiter may still logical-or the two requests. However, once
-the GNT is issued, this arbiter must lock in its decision and now route
-only the granted request to the REQ pin. The arbiter decision lock
-happens regardless of the state of FRAME because it does not know when
-FRAME will be asserted (typically - each initiator will assert FRAME on
-the cycle following GNT). When FRAME is asserted, it is the initiator s
-responsibility to remove its request at the same time. It is the
-arbiters responsibility to allow this request to flow through to REQ and
-not allow the other request to hold REQ asserted. The decision lock may
-be removed at the end of the transaction: for example, when the bus is
-idle (FRAME and IRDY). The arbiter decision may then continue
-asynchronously until GNT is again asserted.
-
-
-Interfacing with Non-PCI 2.1 Compliant Core Logic
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-A small percentage of core logic devices may start a bus transaction
-during the same cycle that GNT is de-asserted. This is non PCI 2.1
-compliant. To ensure compatibility when using PCs with these PCI
-controllers, the EN_VSFX bit must be enabled (refer to Device Control
-Register on page 104). When in this mode, the arbiter does not pass GNT
-to the internal functions unless REQ is asserted. This prevents a bus
-transaction from starting the same cycle as GNT is de-asserted. This
-also has the side effect of not being able to take advantage of bus
-parking, thus lowering arbitration performance. The Bt879 drivers must
-query for these non-compliant devices, and set the EN_VSFX bit only if
-required.
-
-bttv and sound mini howto
--------------------------
-
-There are a lot of different bt848/849/878/879 based boards available.
-Making video work often is not a big deal, because this is handled
-completely by the bt8xx chip, which is common on all boards.  But
-sound is handled in slightly different ways on each board.
-
-To handle the grabber boards correctly, there is a array tvcards[] in
-bttv-cards.c, which holds the information required for each board.
-Sound will work only, if the correct entry is used (for video it often
-makes no difference).  The bttv driver prints a line to the kernel
-log, telling which card type is used.  Like this one:
-
-.. code-block:: none
-
-	bttv0: model: BT848(Hauppauge old) [autodetected]
-
-You should verify this is correct.  If it isn't, you have to pass the
-correct board type as insmod argument, "insmod bttv card=2" for
-example.  The file CARDLIST has a list of valid arguments for card.
-If your card isn't listed there, you might check the source code for
-new entries which are not listed yet.  If there isn't one for your
-card, you can check if one of the existing entries does work for you
-(just trial and error...).
-
-Some boards have an extra processor for sound to do stereo decoding
-and other nice features.  The msp34xx chips are used by Hauppauge for
-example.  If your board has one, you might have to load a helper
-module like msp3400.o to make sound work.  If there isn't one for the
-chip used on your board:  Bad luck.  Start writing a new one.  Well,
-you might want to check the video4linux mailing list archive first...
-
-Of course you need a correctly installed soundcard unless you have the
-speakers connected directly to the grabber board.  Hint: check the
-mixer settings too.  ALSA for example has everything muted by default.
-
-
-How sound works in detail
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Still doesn't work?  Looks like some driver hacking is required.
-Below is a do-it-yourself description for you.
-
-The bt8xx chips have 32 general purpose pins, and registers to control
-these pins.  One register is the output enable register
-(BT848_GPIO_OUT_EN), it says which pins are actively driven by the
-bt848 chip.  Another one is the data register (BT848_GPIO_DATA), where
-you can get/set the status if these pins.  They can be used for input
-and output.
-
-Most grabber board vendors use these pins to control an external chip
-which does the sound routing.  But every board is a little different.
-These pins are also used by some companies to drive remote control
-receiver chips.  Some boards use the i2c bus instead of the gpio pins
-to connect the mux chip.
-
-As mentioned above, there is a array which holds the required
-information for each known board.  You basically have to create a new
-line for your board.  The important fields are these two:
-
-.. code-block:: c
-
-	struct tvcard
-	{
-		[ ... ]
-		u32 gpiomask;
-		u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
-	};
-
-gpiomask specifies which pins are used to control the audio mux chip.
-The corresponding bits in the output enable register
-(BT848_GPIO_OUT_EN) will be set as these pins must be driven by the
-bt848 chip.
-
-The audiomux\[\] array holds the data values for the different inputs
-(i.e. which pins must be high/low for tuner/mute/...).  This will be
-written to the data register (BT848_GPIO_DATA) to switch the audio
-mux.
-
-
-What you have to do is figure out the correct values for gpiomask and
-the audiomux array.  If you have Windows and the drivers four your
-card installed, you might to check out if you can read these registers
-values used by the windows driver.  A tool to do this is available
-from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it
-doesn't work with bt878 boards according to some reports I received.
-Another one with bt878 support is available from
-http://btwincap.sourceforge.net/Files/btspy2.00.zip
-
-You might also dig around in the \*.ini files of the Windows applications.
-You can have a look at the board to see which of the gpio pins are
-connected at all and then start trial-and-error ...
-
-
-Starting with release 0.7.41 bttv has a number of insmod options to
-make the gpio debugging easier:
-
-.. code-block:: none
-
-	bttv_gpio=0/1		enable/disable gpio debug messages
-	gpiomask=n		set the gpiomask value
-	audiomux=i,j,...	set the values of the audiomux array
-	audioall=a		set the values of the audiomux array (one
-				value for all array elements, useful to check
-				out which effect the particular value has).
-
-The messages printed with bttv_gpio=1 look like this:
-
-.. code-block:: none
-
-	bttv0: gpio: en=00000027, out=00000024 in=00ffffd8 [audio: off]
-
-	en  =	output _en_able register (BT848_GPIO_OUT_EN)
-	out =	_out_put bits of the data register (BT848_GPIO_DATA),
-		i.e. BT848_GPIO_DATA & BT848_GPIO_OUT_EN
-	in  = 	_in_put bits of the data register,
-		i.e. BT848_GPIO_DATA & ~BT848_GPIO_OUT_EN
-
-
-
-Other elements of the tvcards array
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-If you are trying to make a new card work you might find it useful to
-know what the other elements in the tvcards array are good for:
-
-.. code-block:: none
-
-	video_inputs    - # of video inputs the card has
-	audio_inputs    - historical cruft, not used any more.
-	tuner           - which input is the tuner
-	svhs            - which input is svhs (all others are labeled composite)
-	muxsel          - video mux, input->registervalue mapping
-	pll             - same as pll= insmod option
-	tuner_type      - same as tuner= insmod option
-	*_modulename    - hint whenever some card needs this or that audio
-			module loaded to work properly.
-	has_radio	- whenever this TV card has a radio tuner.
-	no_msp34xx	- "1" disables loading of msp3400.o module
-	no_tda9875	- "1" disables loading of tda9875.o module
-	needs_tvaudio	- set to "1" to load tvaudio.o module
-
-If some config item is specified both from the tvcards array and as
-insmod option, the insmod option takes precedence.
-
-Cards
------
-
-.. note::
-
-   For a more updated list, please check
-   https://linuxtv.org/wiki/index.php/Hardware_Device_Information
-
-Supported cards: Bt848/Bt848a/Bt849/Bt878/Bt879 cards
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-All cards with Bt848/Bt848a/Bt849/Bt878/Bt879 and normal
-Composite/S-VHS inputs are supported.  Teletext and Intercast support
-(PAL only) for ALL cards via VBI sample decoding in software.
-
-Some cards with additional multiplexing of inputs or other additional
-fancy chips are only partially supported (unless specifications by the
-card manufacturer are given).  When a card is listed here it isn't
-necessarily fully supported.
-
-All other cards only differ by additional components as tuners, sound
-decoders, EEPROMs, teletext decoders ...
-
-
-MATRIX Vision
-~~~~~~~~~~~~~
-
-MV-Delta
-- Bt848A
-- 4 Composite inputs, 1 S-VHS input (shared with 4th composite)
-- EEPROM
-
-http://www.matrix-vision.de/
-
-This card has no tuner but supports all 4 composite (1 shared with an
-S-VHS input) of the Bt848A.
-Very nice card if you only have satellite TV but several tuners connected
-to the card via composite.
-
-Many thanks to Matrix-Vision for giving us 2 cards for free which made
-Bt848a/Bt849 single crystal operation support possible!!!
-
-
-
-Miro/Pinnacle PCTV
-~~~~~~~~~~~~~~~~~~
-
-- Bt848
-  some (all??) come with 2 crystals for PAL/SECAM and NTSC
-- PAL, SECAM or NTSC TV tuner (Philips or TEMIC)
-- MSP34xx sound decoder on add on board
-  decoder is supported but AFAIK does not yet work
-  (other sound MUX setting in GPIO port needed??? somebody who fixed this???)
-- 1 tuner, 1 composite and 1 S-VHS input
-- tuner type is autodetected
-
-http://www.miro.de/
-http://www.miro.com/
-
-
-Many thanks for the free card which made first NTSC support possible back
-in 1997!
-
-
-Hauppauge Win/TV pci
-~~~~~~~~~~~~~~~~~~~~
-
-There are many different versions of the Hauppauge cards with different
-tuners (TV+Radio ...), teletext decoders.
-Note that even cards with same model numbers have (depending on the revision)
-different chips on it.
-
-- Bt848 (and others but always in 2 crystal operation???)
-  newer cards have a Bt878
-
-- PAL, SECAM, NTSC or tuner with or without Radio support
-
-e.g.:
-
-- PAL:
-
-  - TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
-  - TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
-
-- NTSC:
-
-  - TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
-  - TSA5518: no datasheet available on Philips site
-
-- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip
-  with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM)
-  SAA5246 (I2C 0x22) is supported
-
-- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y
-  with configuration information
-  I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf)
-
-- 1 tuner, 1 composite and (depending on model) 1 S-VHS input
-
-- 14052B: mux for selection of sound source
-
-- sound decoder: TDA9800, MSP34xx (stereo cards)
-
-
-Askey CPH-Series
-~~~~~~~~~~~~~~~~
-Developed by TelSignal(?), OEMed by many vendors (Typhoon, Anubis, Dynalink)
-
-- Card series:
-  - CPH01x: BT848 capture only
-  - CPH03x: BT848
-  - CPH05x: BT878 with FM
-  - CPH06x: BT878 (w/o FM)
-  - CPH07x: BT878 capture only
-
-- TV standards:
-  - CPH0x0: NTSC-M/M
-  - CPH0x1: PAL-B/G
-  - CPH0x2: PAL-I/I
-  - CPH0x3: PAL-D/K
-  - CPH0x4: SECAM-L/L
-  - CPH0x5: SECAM-B/G
-  - CPH0x6: SECAM-D/K
-  - CPH0x7: PAL-N/N
-  - CPH0x8: PAL-B/H
-  - CPH0x9: PAL-M/M
-
-- CPH03x was often sold as "TV capturer".
-
-Identifying:
-
-  #) 878 cards can be identified by PCI Subsystem-ID:
-     - 144f:3000 = CPH06x
-     - 144F:3002 = CPH05x w/ FM
-     - 144F:3005 = CPH06x_LC (w/o remote control)
-  #) The cards have a sticker with "CPH"-model on the back.
-  #) These cards have a number printed on the PCB just above the tuner metal box:
-     - "80-CP2000300-x" = CPH03X
-     - "80-CP2000500-x" = CPH05X
-     - "80-CP2000600-x" = CPH06X / CPH06x_LC
-
-  Askey sells these cards as "Magic TView series", Brand "MagicXpress".
-  Other OEM often call these "Tview", "TView99" or else.
-
-Lifeview Flyvideo Series:
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The naming of these series differs in time and space.
-
-Identifying:
-  #) Some models can be identified by PCI subsystem ID:
-
-     - 1852:1852 = Flyvideo 98 FM
-     - 1851:1850 = Flyvideo 98
-     - 1851:1851 = Flyvideo 98 EZ (capture only)
-
-  #) There is a print on the PCB:
-
-     - LR25       = Flyvideo (Zoran ZR36120, SAA7110A)
-     - LR26 Rev.N = Flyvideo II (Bt848)
-     - LR26 Rev.O = Flyvideo II (Bt878)
-     - LR37 Rev.C = Flyvideo EZ (Capture only, ZR36120 + SAA7110)
-     - LR38 Rev.A1= Flyvideo II EZ (Bt848 capture only)
-     - LR50 Rev.Q = Flyvideo 98 (w/eeprom and PCI subsystem ID)
-     - LR50 Rev.W = Flyvideo 98 (no eeprom)
-     - LR51 Rev.E = Flyvideo 98 EZ (capture only)
-     - LR90       = Flyvideo 2000 (Bt878)
-     - LR90 Flyvideo 2000S (Bt878) w/Stereo TV (Package incl. LR91 daughterboard)
-     - LR91       = Stereo daughter card for LR90
-     - LR97       = Flyvideo DVBS
-     - LR99 Rev.E = Low profile card for OEM integration (only internal audio!) bt878
-     - LR136	 = Flyvideo 2100/3100 (Low profile, SAA7130/SAA7134)
-     - LR137      = Flyvideo DV2000/DV3000 (SAA7130/SAA7134 + IEEE1394)
-     - LR138 Rev.C= Flyvideo 2000 (SAA7130)
-     - LR138 Flyvideo 3000 (SAA7134) w/Stereo TV
-
-	- These exist in variations w/FM and w/Remote sometimes denoted
-	  by suffixes "FM" and "R".
-
-  #) You have a laptop (miniPCI card):
-
-      - Product    = FlyTV Platinum Mini
-      - Model/Chip = LR212/saa7135
-
-      - Lifeview.com.tw states (Feb. 2002):
-        "The FlyVideo2000 and FlyVideo2000s product name have renamed to FlyVideo98."
-        Their Bt8x8 cards are listed as discontinued.
-      - Flyvideo 2000S was probably sold as Flyvideo 3000 in some countries(Europe?).
-        The new Flyvideo 2000/3000 are SAA7130/SAA7134 based.
-
-"Flyvideo II" had been the name for the 848 cards, nowadays (in Germany)
-this name is re-used for LR50 Rev.W.
-
-The Lifeview website mentioned Flyvideo III at some time, but such a card
-has not yet been seen (perhaps it was the german name for LR90 [stereo]).
-These cards are sold by many OEMs too.
-
-FlyVideo A2 (Elta 8680)= LR90 Rev.F (w/Remote, w/o FM, stereo TV by tda9821) {Germany}
-
-Lifeview 3000 (Elta 8681) as sold by Plus(April 2002), Germany = LR138 w/ saa7134
-
-lifeview config coding on gpio pins 0-9
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-- LR50 rev. Q ("PARTS: 7031505116), Tuner wurde als Nr. 5 erkannt, Eingänge
-  SVideo, TV, Composite, Audio, Remote:
-
- - CP9..1=100001001 (1: 0-Ohm-Widerstand gegen GND unbestückt; 0: bestückt)
-
-
-Typhoon TV card series:
-~~~~~~~~~~~~~~~~~~~~~~~
-
-These can be CPH, Flyvideo, Pixelview or KNC1 series.
-Typhoon is the brand of Anubis.
-Model 50680 got re-used, some model no. had different contents over time.
-
-Models:
-
-  - 50680 "TV Tuner PCI Pal BG"(old,red package)=can be CPH03x(bt848) or CPH06x(bt878)
-  - 50680 "TV Tuner Pal BG" (blue package)= Pixelview PV-BT878P+ (Rev 9B)
-  - 50681 "TV Tuner PCI Pal I" (variant of 50680)
-  - 50682 "TView TV/FM Tuner Pal BG"       = Flyvideo 98FM (LR50 Rev.Q)
-
-  .. note::
-
-	 The package has a picture of CPH05x (which would be a real TView)
-
-  - 50683 "TV Tuner PCI SECAM" (variant of 50680)
-  - 50684 "TV Tuner Pal BG"                = Pixelview 878TV(Rev.3D)
-  - 50686 "TV Tuner"                       = KNC1 TV Station
-  - 50687 "TV Tuner stereo"                = KNC1 TV Station pro
-  - 50688 "TV Tuner RDS" (black package)   = KNC1 TV Station RDS
-  - 50689  TV SAT DVB-S CARD CI PCI (SAA7146AH, SU1278?) = "KNC1 TV Station DVB-S"
-  - 50692 "TV/FM Tuner" (small PCB)
-  - 50694  TV TUNER CARD RDS (PHILIPS CHIPSET SAA7134HL)
-  - 50696  TV TUNER STEREO (PHILIPS CHIPSET SAA7134HL, MK3ME Tuner)
-  - 50804  PC-SAT TV/Audio Karte = Techni-PC-Sat (ZORAN 36120PQC, Tuner:Alps)
-  - 50866  TVIEW SAT RECEIVER+ADR
-  - 50868 "TV/FM Tuner Pal I" (variant of 50682)
-  - 50999 "TV/FM Tuner Secam" (variant of 50682)
-
-Guillemot
-~~~~~~~~~
-
-Models:
-
-- Maxi-TV PCI (ZR36120)
-- Maxi TV Video 2 = LR50 Rev.Q (FI1216MF, PAL BG+SECAM)
-- Maxi TV Video 3 = CPH064 (PAL BG + SECAM)
-
-Mentor
-~~~~~~
-
-Mentor TV card ("55-878TV-U1") = Pixelview 878TV(Rev.3F) (w/FM w/Remote)
-
-Prolink
-~~~~~~~
-
-- TV cards:
-
-  - PixelView Play TV pro - (Model: PV-BT878P+ REV 8E)
-  - PixelView Play TV pro - (Model: PV-BT878P+ REV 9D)
-  - PixelView Play TV pro - (Model: PV-BT878P+ REV 4C / 8D / 10A )
-  - PixelView Play TV - (Model: PV-BT848P+)
-  - 878TV - (Model: PV-BT878TV)
-
-- Multimedia TV packages (card + software pack):
-
-  - PixelView Play TV Theater - (Model: PV-M4200) =  PixelView Play TV pro + Software
-  - PixelView Play TV PAK -     (Model: PV-BT878P+ REV 4E)
-  - PixelView Play TV/VCR -     (Model: PV-M3200 REV 4C / 8D / 10A )
-  - PixelView Studio PAK -      (Model:    M2200 REV 4C / 8D / 10A )
-  - PixelView PowerStudio PAK - (Model: PV-M3600 REV 4E)
-  - PixelView DigitalVCR PAK -  (Model: PV-M2400 REV 4C / 8D / 10A )
-  - PixelView PlayTV PAK II (TV/FM card + usb camera)  PV-M3800
-  - PixelView PlayTV XP PV-M4700,PV-M4700(w/FM)
-  - PixelView PlayTV DVR PV-M4600  package contents:PixelView PlayTV pro, windvr & videoMail s/w
-
-- Further Cards:
-
-  - PV-BT878P+rev.9B (Play TV Pro, opt. w/FM w/NICAM)
-  - PV-BT878P+rev.2F
-  - PV-BT878P Rev.1D (bt878, capture only)
-
-  - XCapture PV-CX881P (cx23881)
-  - PlayTV HD PV-CX881PL+, PV-CX881PL+(w/FM) (cx23881)
-
-  - DTV3000 PV-DTV3000P+ DVB-S CI = Twinhan VP-1030
-  - DTV2000 DVB-S = Twinhan VP-1020
-
-- Video Conferencing:
-
-  - PixelView Meeting PAK - (Model: PV-BT878P)
-  - PixelView Meeting PAK Lite - (Model: PV-BT878P)
-  - PixelView Meeting PAK plus - (Model: PV-BT878P+rev 4C/8D/10A)
-  - PixelView Capture - (Model: PV-BT848P)
-  - PixelView PlayTV USB pro
-  - Model No. PV-NT1004+, PV-NT1004+ (w/FM) = NT1004 USB decoder chip + SAA7113 video decoder chip
-
-Dynalink
-~~~~~~~~
-
-These are CPH series.
-
-Phoebemicro
-~~~~~~~~~~~
-
-- TV Master    = CPH030 or CPH060
-- TV Master FM = CPH050
-
-Genius/Kye
-~~~~~~~~~~
-
-- Video Wonder/Genius Internet Video Kit = LR37 Rev.C
-- Video Wonder Pro II (848 or 878) = LR26
-
-Tekram
-~~~~~~
-
-- VideoCap C205 (Bt848)
-- VideoCap C210 (zr36120 +Philips)
-- CaptureTV M200 (ISA)
-- CaptureTV M205 (Bt848)
-
-Lucky Star
-~~~~~~~~~~
-
-- Image World Conference TV = LR50 Rev. Q
-
-Leadtek
-~~~~~~~
-
-- WinView 601 (Bt848)
-- WinView 610 (Zoran)
-- WinFast2000
-- WinFast2000 XP
-
-Support for the Leadtek WinView 601 TV/FM
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Author of this section: Jon Tombs <jon@gte.esi.us.es>
-
-This card is basically the same as all the rest (Bt484A, Philips tuner),
-the main difference is that they have attached a programmable attenuator to 3
-GPIO lines in order to give some volume control. They have also stuck an
-infra-red remote control decoded on the board, I will add support for this
-when I get time (it simple generates an interrupt for each key press, with
-the key code is placed in the GPIO port).
-
-I don't yet have any application to test the radio support. The tuner
-frequency setting should work but it is possible that the audio multiplexer
-is wrong. If it doesn't work, send me email.
-
-
-- No Thanks to Leadtek they refused to answer any questions about their
-  hardware. The driver was written by visual inspection of the card. If you
-  use this driver, send an email insult to them, and tell them you won't
-  continue buying their hardware unless they support Linux.
-
-- Little thanks to Princeton Technology Corp (http://www.princeton.com.tw)
-  who make the audio attenuator. Their publicly available data-sheet available
-  on their web site doesn't include the chip programming information! Hidden
-  on their server are the full data-sheets, but don't ask how I found it.
-
-To use the driver I use the following options, the tuner and pll settings might
-be different in your country
-
-insmod videodev
-insmod i2c scan=1 i2c_debug=0 verbose=0
-insmod tuner type=1 debug=0
-insmod bttv  pll=1 radio=1 card=17
-
-
-KNC One
-~~~~~~~
-
-- TV-Station
-- TV-Station SE (+Software Bundle)
-- TV-Station pro (+TV stereo)
-- TV-Station FM (+Radio)
-- TV-Station RDS (+RDS)
-- TV Station SAT (analog satellite)
-- TV-Station DVB-S
-
-.. note:: newer Cards have saa7134, but model name stayed the same?
-
-Provideo
-~~~~~~~~
-
-- PV951 or PV-951 (also are sold as:
-   Boeder TV-FM Video Capture Card,
-   Titanmedia Supervision TV-2400,
-   Provideo PV951 TF,
-   3DeMon PV951,
-   MediaForte TV-Vision PV951,
-   Yoko PV951,
-   Vivanco Tuner Card PCI Art.-Nr.: 68404,
-   ) now named PV-951T
-
-- Surveillance Series:
-
- - PV-141
- - PV-143
- - PV-147
- - PV-148 (capture only)
- - PV-150
- - PV-151
-
-- TV-FM Tuner Series:
-
- - PV-951TDV (tv tuner + 1394)
- - PV-951T/TF
- - PV-951PT/TF
- - PV-956T/TF Low Profile
- - PV-911
-
-Highscreen
-~~~~~~~~~~
-
-Models:
-
-- TV Karte = LR50 Rev.S
-- TV-Boostar = Terratec Terra TV+ Version 1.0 (Bt848, tda9821) "ceb105.pcb"
-
-Zoltrix
-~~~~~~~
-
-Models:
-
-- Face to Face Capture (Bt848 capture only) (PCB "VP-2848")
-- Face To Face TV MAX (Bt848) (PCB "VP-8482 Rev1.3")
-- Genie TV (Bt878) (PCB "VP-8790 Rev 2.1")
-- Genie Wonder Pro
-
-AVerMedia
-~~~~~~~~~
-
-- AVer FunTV Lite (ISA, AV3001 chipset)  "M101.C"
-- AVerTV
-- AVerTV Stereo
-- AVerTV Studio (w/FM)
-- AVerMedia TV98 with Remote
-- AVerMedia TV/FM98 Stereo
-- AVerMedia TVCAM98
-- TVCapture (Bt848)
-- TVPhone (Bt848)
-- TVCapture98 (="AVerMedia TV98" in USA) (Bt878)
-- TVPhone98 (Bt878, w/FM)
-
-======== =========== =============== ======= ====== ======== =======================
-PCB      PCI-ID      Model-Name      Eeprom  Tuner  Sound    Country
-======== =========== =============== ======= ====== ======== =======================
-M101.C   ISA !
-M108-B      Bt848                     --     FR1236		 US   [#f2]_, [#f3]_
-M1A8-A      Bt848    AVer TV-Phone           FM1216  --
-M168-T   1461:0003   AVerTV Studio   48:17   FM1216 TDA9840T  D    [#f1]_ w/FM w/Remote
-M168-U   1461:0004   TVCapture98     40:11   FI1216   --      D    w/Remote
-M168II-B 1461:0003   Medion MD9592   48:16   FM1216 TDA9873H  D    w/FM
-======== =========== =============== ======= ====== ======== =======================
-
-.. [#f1] Daughterboard MB68-A with TDA9820T and TDA9840T
-.. [#f2] Sony NE41S soldered (stereo sound?)
-.. [#f3] Daughterboard M118-A w/ pic 16c54 and 4 MHz quartz
-
-- US site has different drivers for (as of 09/2002):
-
-  - EZ Capture/InterCam PCI (BT-848 chip)
-  - EZ Capture/InterCam PCI (BT-878 chip)
-  - TV-Phone (BT-848 chip)
-  - TV98 (BT-848 chip)
-  - TV98 With Remote (BT-848 chip)
-  - TV98 (BT-878 chip)
-  - TV98 With Remote (BT-878)
-  - TV/FM98 (BT-878 chip)
-  - AVerTV
-  - AverTV Stereo
-  - AVerTV Studio
-
-DE hat diverse Treiber fuer diese Modelle (Stand 09/2002):
-
-  - TVPhone (848) mit Philips tuner FR12X6 (w/ FM radio)
-  - TVPhone (848) mit Philips tuner FM12X6 (w/ FM radio)
-  - TVCapture (848) w/Philips tuner FI12X6
-  - TVCapture (848) non-Philips tuner
-  - TVCapture98 (Bt878)
-  - TVPhone98 (Bt878)
-  - AVerTV und TVCapture98 w/VCR (Bt 878)
-  - AVerTVStudio und TVPhone98 w/VCR (Bt878)
-  - AVerTV GO Serie (Kein SVideo Input)
-  - AVerTV98 (BT-878 chip)
-  - AVerTV98 mit Fernbedienung (BT-878 chip)
-  - AVerTV/FM98 (BT-878 chip)
-
-  - VDOmate (www.averm.com.cn) = M168U ?
-
-Aimslab
-~~~~~~~
-
-Models:
-
-- Video Highway or "Video Highway TR200" (ISA)
-- Video Highway Xtreme (aka "VHX") (Bt848, FM w/ TEA5757)
-
-IXMicro (former: IMS=Integrated Micro Solutions)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- IXTV BT848 (=TurboTV)
-- IXTV BT878
-- IMS TurboTV (Bt848)
-
-Lifetec/Medion/Tevion/Aldi
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- LT9306/MD9306 = CPH061
-- LT9415/MD9415 = LR90 Rev.F or Rev.G
-- MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H)
-- MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner)
-- MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner)
-
-Modular Technologies (www.modulartech.com) UK
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- MM100 PCTV (Bt848)
-- MM201 PCTV (Bt878, Bt832) w/ Quartzsight camera
-- MM202 PCTV (Bt878, Bt832, tda9874)
-- MM205 PCTV (Bt878)
-- MM210 PCTV (Bt878) (Galaxy TV, Galaxymedia ?)
-
-Terratec
-~~~~~~~~
-
-Models:
-
-- Terra TV+ Version 1.0 (Bt848), "ceb105.PCB" printed on the PCB, TDA9821
-- Terra TV+ Version 1.1 (Bt878), "LR74 Rev.E" printed on the PCB, TDA9821
-- Terra TValueRadio,             "LR102 Rev.C" printed on the PCB
-- Terra TV/Radio+ Version 1.0,   "80-CP2830100-0" TTTV3 printed on the PCB,
-  "CPH010-E83" on the back, SAA6588T, TDA9873H
-- Terra TValue Version BT878,    "80-CP2830110-0 TTTV4" printed on the PCB,
-  "CPH011-D83" on back
-- Terra TValue Version 1.0       "ceb105.PCB" (really identical to Terra TV+ Version 1.0)
-- Terra TValue New Revision	  "LR102 Rec.C"
-- Terra Active Radio Upgrade (tea5757h, saa6588t)
-
-- LR74 is a newer PCB revision of ceb105 (both incl. connector for Active Radio Upgrade)
-
-- Cinergy 400 (saa7134), "E877 11(S)", "PM820092D" printed on PCB
-- Cinergy 600 (saa7134)
-
-Technisat
-~~~~~~~~~
-
-Models:
-
-- Discos ADR PC-Karte ISA (no TV!)
-- Discos ADR PC-Karte PCI (probably no TV?)
-- Techni-PC-Sat (Sat. analog)
-  Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A)
-- Mediafocus I (zr36120/zr36125, drp3510, Sat. analog + ADR Radio)
-- Mediafocus II (saa7146, Sat. analog)
-- SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A)
-- SkyStar 1 DVB  (AV7110) = Technotrend Premium
-- SkyStar 2 DVB  (B2C2) (=Sky2PC)
-
-Siemens
-~~~~~~~
-
-Multimedia eXtension Board (MXB) (SAA7146, SAA7111)
-
-Powercolor
-~~~~~~~~~~
-
-Models:
-
-- MTV878
-       Package comes with different contents:
-
-           a) pcb "MTV878" (CARD=75)
-           b) Pixelview Rev. 4\_
-
-- MTV878R w/Remote Control
-- MTV878F w/Remote Control w/FM radio
-
-Pinnacle
-~~~~~~~~
-
-PCTV models:
-
-- Mirovideo PCTV (Bt848)
-- Mirovideo PCTV SE (Bt848)
-- Mirovideo PCTV Pro (Bt848 + Daughterboard for TV Stereo and FM)
-- Studio PCTV Rave (Bt848 Version = Mirovideo PCTV)
-- Studio PCTV Rave (Bt878 package w/o infrared)
-- Studio PCTV      (Bt878)
-- Studio PCTV Pro  (Bt878 stereo w/ FM)
-- Pinnacle PCTV    (Bt878, MT2032)
-- Pinnacle PCTV Pro (Bt878, MT2032)
-- Pinncale PCTV Sat (bt878a, HM1821/1221) ["Conexant CX24110 with CX24108 tuner, aka HM1221/HM1811"]
-- Pinnacle PCTV Sat XE
-
-M(J)PEG capture and playback models:
-
-- DC1+ (ISA)
-- DC10  (zr36057,     zr36060,      saa7110, adv7176)
-- DC10+ (zr36067,     zr36060,      saa7110, adv7176)
-- DC20  (ql16x24b,zr36050, zr36016, saa7110, saa7187 ...)
-- DC30  (zr36057, zr36050, zr36016, vpx3220, adv7176, ad1843, tea6415, miro FST97A1)
-- DC30+ (zr36067, zr36050, zr36016, vpx3220, adv7176)
-- DC50  (zr36067, zr36050, zr36016, saa7112, adv7176 (2 pcs.?), ad1843, miro FST97A1, Lattice ???)
-
-Lenco
-~~~~~
-
-Models:
-
-- MXR-9565 (=Technisat Mediafocus?)
-- MXR-9571 (Bt848) (=CPH031?)
-- MXR-9575
-- MXR-9577 (Bt878) (=Prolink 878TV Rev.3x)
-- MXTV-9578CP (Bt878) (= Prolink PV-BT878P+4E)
-
-Iomega
-~~~~~~
-
-Buz (zr36067, zr36060, saa7111, saa7185)
-
-LML
-~~~
-   LML33 (zr36067, zr36060, bt819, bt856)
-
-Grandtec
-~~~~~~~~
-
-Models:
-
-- Grand Video Capture (Bt848)
-- Multi Capture Card  (Bt878)
-
-Koutech
-~~~~~~~
-
-Models:
-
-- KW-606 (Bt848)
-- KW-607 (Bt848 capture only)
-- KW-606RSF
-- KW-607A (capture only)
-- KW-608 (Zoran capture only)
-
-IODATA (jp)
-~~~~~~~~~~~
-
-Models:
-
-- GV-BCTV/PCI
-- GV-BCTV2/PCI
-- GV-BCTV3/PCI
-- GV-BCTV4/PCI
-- GV-VCP/PCI (capture only)
-- GV-VCP2/PCI (capture only)
-
-Canopus (jp)
-~~~~~~~~~~~~
-
-WinDVR	= Kworld "KW-TVL878RF"
-
-www.sigmacom.co.kr
-~~~~~~~~~~~~~~~~~~
-
-Sigma Cyber TV II
-
-www.sasem.co.kr
-~~~~~~~~~~~~~~~
-
-Litte OnAir TV
-
-hama
-~~~~
-
-TV/Radio-Tuner Card, PCI (Model 44677) = CPH051
-
-Sigma Designs
-~~~~~~~~~~~~~
-
-Hollywood plus (em8300, em9010, adv7175), (PCB "M340-10") MPEG DVD decoder
-
-Formac
-~~~~~~
-
-Models:
-
-- iProTV (Card for iMac Mezzanine slot, Bt848+SCSI)
-- ProTV (Bt848)
-- ProTV II = ProTV Stereo (Bt878) ["stereo" means FM stereo, tv is still mono]
-
-ATI
-~~~
-
-Models:
-
-- TV-Wonder
-- TV-Wonder VE
-
-Diamond Multimedia
-~~~~~~~~~~~~~~~~~~
-
-DTV2000 (Bt848, tda9875)
-
-Aopen
-~~~~~
-
-- VA1000 Plus (w/ Stereo)
-- VA1000 Lite
-- VA1000 (=LR90)
-
-Intel
-~~~~~
-
-Models:
-
-- Smart Video Recorder (ISA full-length)
-- Smart Video Recorder pro (ISA half-length)
-- Smart Video Recorder III (Bt848)
-
-STB
-~~~
-
-Models:
-
-- STB Gateway 6000704 (bt878)
-- STB Gateway 6000699 (bt848)
-- STB Gateway 6000402 (bt848)
-- STB TV130 PCI
-
-Videologic
-~~~~~~~~~~
-
-Models:
-
-- Captivator Pro/TV (ISA?)
-- Captivator PCI/VC (Bt848 bundled with camera) (capture only)
-
-Technotrend
-~~~~~~~~~~~~
-
-Models:
-
-- TT-SAT PCI (PCB "Sat-PCI Rev.:1.3.1"; zr36125, vpx3225d, stc0056a, Tuner:BSKE6-155A
-- TT-DVB-Sat
-   - revisions 1.1, 1.3, 1.5, 1.6 and 2.1
-   - This card is sold as OEM from:
-
-	- Siemens DVB-s Card
-	- Hauppauge WinTV DVB-S
-	- Technisat SkyStar 1 DVB
-	- Galaxis DVB Sat
-
-   - Now this card is called TT-PCline Premium Family
-   - TT-Budget (saa7146, bsru6-701a)
-     This card is sold as OEM from:
-
-	- Hauppauge WinTV Nova
-	- Satelco Standard PCI (DVB-S)
-   - TT-DVB-C PCI
-
-Teles
-~~~~~
-
- DVB-s (Rev. 2.2, BSRV2-301A, data only?)
-
-Remote Vision
-~~~~~~~~~~~~~
-
-MX RV605 (Bt848 capture only)
-
-Boeder
-~~~~~~
-
-Models:
-
-- PC ChatCam (Model 68252) (Bt848 capture only)
-- Tv/Fm Capture Card  (Model 68404) = PV951
-
-Media-Surfer  (esc-kathrein.de)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- Sat-Surfer (ISA)
-- Sat-Surfer PCI = Techni-PC-Sat
-- Cable-Surfer 1
-- Cable-Surfer 2
-- Cable-Surfer PCI (zr36120)
-- Audio-Surfer (ISA Radio card)
-
-Jetway (www.jetway.com.tw)
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- JW-TV 878M
-- JW-TV 878  = KWorld KW-TV878RF
-
-Galaxis
-~~~~~~~
-
-Models:
-
-- Galaxis DVB Card S CI
-- Galaxis DVB Card C CI
-- Galaxis DVB Card S
-- Galaxis DVB Card C
-- Galaxis plug.in S [neuer Name: Galaxis DVB Card S CI
-
-Hauppauge
-~~~~~~~~~
-
-Models:
-
-- many many WinTV models ...
-- WinTV DVBs = Technotrend Premium 1.3
-- WinTV NOVA = Technotrend Budget 1.1 "S-DVB DATA"
-- WinTV NOVA-CI "SDVBACI"
-- WinTV Nova USB (=Technotrend USB 1.0)
-- WinTV-Nexus-s (=Technotrend Premium 2.1 or 2.2)
-- WinTV PVR
-- WinTV PVR 250
-- WinTV PVR 450
-
-US models
-
--990 WinTV-PVR-350 (249USD) (iTVC15 chipset + radio)
--980 WinTV-PVR-250 (149USD) (iTVC15 chipset)
--880 WinTV-PVR-PCI (199USD) (KFIR chipset + bt878)
--881 WinTV-PVR-USB
--190 WinTV-GO
--191 WinTV-GO-FM
--404 WinTV
--401 WinTV-radio
--495 WinTV-Theater
--602 WinTV-USB
--621 WinTV-USB-FM
--600 USB-Live
--698 WinTV-HD
--697 WinTV-D
--564 WinTV-Nexus-S
-
-Deutsche Modelle:
-
--603 WinTV GO
--719 WinTV Primio-FM
--718 WinTV PCI-FM
--497 WinTV Theater
--569 WinTV USB
--568 WinTV USB-FM
--882 WinTV PVR
--981 WinTV PVR 250
--891 WinTV-PVR-USB
--541 WinTV Nova
--488 WinTV Nova-Ci
--564 WinTV-Nexus-s
--727 WinTV-DVB-c
--545 Common Interface
--898 WinTV-Nova-USB
-
-UK models:
-
--607 WinTV Go
--693,793 WinTV Primio FM
--647,747 WinTV PCI FM
--498 WinTV Theater
--883 WinTV PVR
--893 WinTV PVR USB  (Duplicate entry)
--566 WinTV USB (UK)
--573 WinTV USB FM
--429 Impact VCB (bt848)
--600 USB Live (Video-In 1x Comp, 1xSVHS)
--542 WinTV Nova
--717 WinTV DVB-S
--909 Nova-t PCI
--893 Nova-t USB   (Duplicate entry)
--802 MyTV
--804 MyView
--809 MyVideo
--872 MyTV2Go FM
--546 WinTV Nova-S CI
--543 WinTV Nova
--907 Nova-S USB
--908 Nova-T USB
--717 WinTV Nexus-S
--157 DEC3000-s Standalone + USB
-
-Spain:
-
--685 WinTV-Go
--690 WinTV-PrimioFM
--416 WinTV-PCI Nicam Estereo
--677 WinTV-PCI-FM
--699 WinTV-Theater
--683 WinTV-USB
--678 WinTV-USB-FM
--983 WinTV-PVR-250
--883 WinTV-PVR-PCI
--993 WinTV-PVR-350
--893 WinTV-PVR-USB
--728 WinTV-DVB-C PCI
--832 MyTV2Go
--869 MyTV2Go-FM
--805 MyVideo (USB)
-
-
-Matrix-Vision
-~~~~~~~~~~~~~
-
-Models:
-
-- MATRIX-Vision MV-Delta
-- MATRIX-Vision MV-Delta 2
-- MVsigma-SLC (Bt848)
-
-Conceptronic (.net)
-~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- TVCON FM,  TV card w/ FM = CPH05x
-- TVCON = CPH06x
-
-BestData
-~~~~~~~~
-
-Models:
-
-- HCC100 = VCC100rev1 + camera
-- VCC100 rev1 (bt848)
-- VCC100 rev2 (bt878)
-
-Gallant  (www.gallantcom.com) www.minton.com.tw
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- Intervision IV-510 (capture only bt8x8)
-- Intervision IV-550 (bt8x8)
-- Intervision IV-100 (zoran)
-- Intervision IV-1000 (bt8x8)
-
-Asonic (www.asonic.com.cn) (website down)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-SkyEye tv 878
-
-Hoontech
-~~~~~~~~
-
-878TV/FM
-
-Teppro (www.itcteppro.com.tw)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- ITC PCITV (Card Ver 1.0) "Teppro TV1/TVFM1 Card"
-- ITC PCITV (Card Ver 2.0)
-- ITC PCITV (Card Ver 3.0) = "PV-BT878P+ (REV.9D)"
-- ITC PCITV (Card Ver 4.0)
-- TEPPRO IV-550 (For BT848 Main Chip)
-- ITC DSTTV (bt878, satellite)
-- ITC VideoMaker (saa7146, StreamMachine sm2110, tvtuner) "PV-SM2210P+ (REV:1C)"
-
-Kworld (www.kworld.com.tw)
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-PC TV Station:
-
-- KWORLD KW-TV878R  TV (no radio)
-- KWORLD KW-TV878RF TV (w/ radio)
-- KWORLD KW-TVL878RF (low profile)
-- KWORLD KW-TV713XRF (saa7134)
-
-
- MPEG TV Station (same cards as above plus WinDVR Software MPEG en/decoder)
-
-- KWORLD KW-TV878R -Pro   TV (no Radio)
-- KWORLD KW-TV878RF-Pro   TV (w/ Radio)
-- KWORLD KW-TV878R -Ultra TV (no Radio)
-- KWORLD KW-TV878RF-Ultra TV (w/ Radio)
-
-JTT/ Justy Corp.(http://www.jtt.ne.jp/)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-JTT-02 (JTT TV) "TV watchmate pro" (bt848)
-
-ADS www.adstech.com
-~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- Channel Surfer TV ( CHX-950 )
-- Channel Surfer TV+FM ( CHX-960FM )
-
-AVEC www.prochips.com
-~~~~~~~~~~~~~~~~~~~~~
-
-AVEC Intercapture (bt848, tea6320)
-
-NoBrand
-~~~~~~~
-
-TV Excel = Australian Name for "PV-BT878P+ 8E" or "878TV Rev.3\_"
-
-Mach www.machspeed.com
-~~~~~~~~~~~~~~~~~~~~~~
-
-Mach TV 878
-
-Eline www.eline-net.com/
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- Eline Vision TVMaster / TVMaster FM (ELV-TVM/ ELV-TVM-FM) = LR26  (bt878)
-- Eline Vision TVMaster-2000 (ELV-TVM-2000, ELV-TVM-2000-FM)= LR138 (saa713x)
-
-Spirit
-~~~~~~
-
-- Spirit TV Tuner/Video Capture Card (bt848)
-
-Boser www.boser.com.tw
-~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- HS-878 Mini PCI Capture Add-on Card
-- HS-879 Mini PCI 3D Audio and Capture Add-on Card (w/ ES1938 Solo-1)
-
-Satelco www.citycom-gmbh.de, www.satelco.de
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- TV-FM =KNC1 saa7134
-- Standard PCI (DVB-S) = Technotrend Budget
-- Standard PCI (DVB-S) w/ CI
-- Satelco Highend PCI (DVB-S) = Technotrend Premium
-
-
-Sensoray www.sensoray.com
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- Sensoray 311 (PC/104 bus)
-- Sensoray 611 (PCI)
-
-CEI (Chartered Electronics Industries Pte Ltd [CEI] [FCC ID HBY])
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- TV Tuner  -  HBY-33A-RAFFLES  Brooktree Bt848KPF + Philips
-- TV Tuner MG9910  -  HBY33A-TVO  CEI + Philips SAA7110 + OKI M548262 + ST STV8438CV
-- Primetime TV (ISA)
-
-  - acquired by Singapore Technologies
-  - now operating as Chartered Semiconductor Manufacturing
-  - Manufacturer of video cards is listed as:
-
-    - Cogent Electronics Industries [CEI]
-
-AITech
-~~~~~~
-
-Models:
-
-- Wavewatcher TV (ISA)
-- AITech WaveWatcher TV-PCI = can be LR26 (Bt848) or LR50 (BT878)
-- WaveWatcher TVR-202 TV/FM Radio Card (ISA)
-
-MAXRON
-~~~~~~
-
-Maxron MaxTV/FM Radio (KW-TV878-FNT) = Kworld or JW-TV878-FBK
-
-www.ids-imaging.de
-~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- Falcon Series (capture only)
-
-In USA: http://www.theimagingsource.com/
-- DFG/LC1
-
-www.sknet-web.co.jp
-~~~~~~~~~~~~~~~~~~~
-
-SKnet Monster TV (saa7134)
-
-A-Max www.amaxhk.com (Colormax, Amax, Napa)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-APAC Viewcomp 878
-
-Cybertainment
-~~~~~~~~~~~~~
-
-Models:
-
-- CyberMail AV Video Email Kit w/ PCI Capture Card (capture only)
-- CyberMail Xtreme
-
-These are Flyvideo
-
-VCR (http://www.vcrinc.com/)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Video Catcher 16
-
-Twinhan
-~~~~~~~
-
-Models:
-
-- DST Card/DST-IP (bt878, twinhan asic) VP-1020
-  - Sold as:
-
-    - KWorld DVBS Satellite TV-Card
-    - Powercolor DSTV Satellite Tuner Card
-    - Prolink Pixelview DTV2000
-    - Provideo PV-911 Digital Satellite TV Tuner Card With Common Interface ?
-
-- DST-CI Card (DVB Satellite) VP-1030
-- DCT Card (DVB cable)
-
-MSI
-~~~
-
-Models:
-
-- MSI TV@nywhere Tuner Card (MS-8876) (CX23881/883) Not Bt878 compatible.
-- MS-8401 DVB-S
-
-Focus www.focusinfo.com
-~~~~~~~~~~~~~~~~~~~~~~~
-
-InVideo PCI (bt878)
-
-Sdisilk www.sdisilk.com/
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- SDI Silk 100
-- SDI Silk 200 SDI Input Card
-
-www.euresys.com
-~~~~~~~~~~~~~~~
-
-PICOLO series
-
-PMC/Pace
-~~~~~~~~
-
-www.pacecom.co.uk website closed
-
-Mercury www.kobian.com (UK and FR)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- LR50
-- LR138RBG-Rx  == LR138
-
-TEC sound
-~~~~~~~~~
-
-TV-Mate = Zoltrix VP-8482
-
-Though educated googling found: www.techmakers.com
-
-(package and manuals don't have any other manufacturer info) TecSound
-
-Lorenzen www.lorenzen.de
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-SL DVB-S PCI = Technotrend Budget PCI (su1278 or bsru version)
-
-Origo (.uk) www.origo2000.com
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-PC TV Card = LR50
-
-I/O Magic www.iomagic.com
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-PC PVR - Desktop TV Personal Video Recorder DR-PCTV100 = Pinnacle ROB2D-51009464 4.0 + Cyberlink PowerVCR II
-
-Arowana
-~~~~~~~
-
-TV-Karte / Poso Power TV (?) = Zoltrix VP-8482 (?)
-
-iTVC15 boards
-~~~~~~~~~~~~~
-
-kuroutoshikou.com ITVC15
-yuan.com MPG160 PCI TV (Internal PCI MPEG2 encoder card plus TV-tuner)
-
-Asus www.asuscom.com
-~~~~~~~~~~~~~~~~~~~~
-
-Models:
-
-- Asus TV Tuner Card 880 NTSC (low profile, cx23880)
-- Asus TV (saa7134)
-
-Hoontech
-~~~~~~~~
-
-http://www.hoontech.de/
-
-- HART Vision 848 (H-ART Vision 848)
-- HART Vision 878 (H-Art Vision 878)
-
-
-
-Chips used at bttv devices
---------------------------
-
-- all boards:
-
-  - Brooktree Bt848/848A/849/878/879: video capture chip
-
-- Board specific
-
-  - Miro PCTV:
-
-    - Philips or Temic Tuner
-
-  - Hauppauge Win/TV pci (version 405):
-
-    - Microchip 24LC02B or Philips 8582E2Y:
-
-       - 256 Byte EEPROM with configuration information
-       - I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf)
-
-    - Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23
-
-    - TDA9800: sound decoder
-
-    - Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem)
-
-    - 14052B: analog switch for selection of sound source
-
-- PAL:
-
-  - TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
-  - TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
-
-- NTSC:
-
-  - TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
-  - TSA5518: no datasheet available on Philips site
-
-- STB TV pci:
-
-  - ???
-  - if you want better support for STB cards send me info!
-    Look at the board! What chips are on it?
-
-
-
-
-Specs
------
-
-Philips		http://www.Semiconductors.COM/pip/
-
-Conexant	http://www.conexant.com/
-
-Micronas	http://www.micronas.com/en/home/index.html
-
-Thanks
-------
-
-Many thanks to:
-
-- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848
-  and tuner programming and his control program xtvc.
-
-- Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext
-  package.
-
-- Gerd Hoffmann for the MSP3400 support and the modular
-  I2C, tuner, ... support.
-
-
-- MATRIX Vision for giving us 2 cards for free, which made support of
-  single crystal operation possible.
-
-- MIRO for providing a free PCTV card and detailed information about the
-  components on their cards. (E.g. how the tuner type is detected)
-  Without their card I could not have debugged the NTSC mode.
-
-- Hauppauge for telling how the sound input is selected and what components
-  they do and will use on their radio cards.
-  Also many thanks for faxing me the FM1216 data sheet.
-
-Contributors
-------------
-
-Michael Chu <mmchu@pobox.com>
-  AverMedia fix and more flexible card recognition
-
-Alan Cox <alan@lxorguk.ukuu.org.uk>
-  Video4Linux interface and 2.1.x kernel adaptation
-
-Chris Kleitsch
-  Hardware I2C
-
-Gerd Hoffmann
-  Radio card (ITT sound processor)
-
-bigfoot <bigfoot@net-way.net>
-
-Ragnar Hojland Espinosa <ragnar@macula.net>
-  ConferenceTV card
-
-
-+ many more (please mail me if you are missing in this list and would
-	     like to be mentioned)
diff --git a/Documentation/media/v4l-drivers/cafe_ccic.rst b/Documentation/media/v4l-drivers/cafe_ccic.rst
deleted file mode 100644
index ff7fbce1342a..000000000000
--- a/Documentation/media/v4l-drivers/cafe_ccic.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The cafe_ccic driver
-====================
-
-Author: Jonathan Corbet <corbet@lwn.net>
-
-Introduction
-------------
-
-"cafe_ccic" is a driver for the Marvell 88ALP01 "cafe" CMOS camera
-controller.  This is the controller found in first-generation OLPC systems,
-and this driver was written with support from the OLPC project.
-
-Current status: the core driver works.  It can generate data in YUV422,
-RGB565, and RGB444 formats.  (Anybody looking at the code will see RGB32 as
-well, but that is a debugging aid which will be removed shortly).  VGA and
-QVGA modes work; CIF is there but the colors remain funky.  Only the OV7670
-sensor is known to work with this controller at this time.
-
-To try it out: either of these commands will work:
-
-.. code-block:: none
-
-     $ mplayer tv:// -tv driver=v4l2:width=640:height=480 -nosound
-     $ mplayer tv:// -tv driver=v4l2:width=640:height=480:outfmt=bgr16 -nosound
-
-The "xawtv" utility also works; gqcam does not, for unknown reasons.
-
-Load time options
------------------
-
-There are a few load-time options, most of which can be changed after
-loading via sysfs as well:
-
- - alloc_bufs_at_load:  Normally, the driver will not allocate any DMA
-   buffers until the time comes to transfer data.  If this option is set,
-   then worst-case-sized buffers will be allocated at module load time.
-   This option nails down the memory for the life of the module, but
-   perhaps decreases the chances of an allocation failure later on.
-
- - dma_buf_size: The size of DMA buffers to allocate.  Note that this
-   option is only consulted for load-time allocation; when buffers are
-   allocated at run time, they will be sized appropriately for the current
-   camera settings.
-
- - n_dma_bufs: The controller can cycle through either two or three DMA
-   buffers.  Normally, the driver tries to use three buffers; on faster
-   systems, however, it will work well with only two.
-
- - min_buffers: The minimum number of streaming I/O buffers that the driver
-   will consent to work with.  Default is one, but, on slower systems,
-   better behavior with mplayer can be achieved by setting to a higher
-   value (like six).
-
- - max_buffers: The maximum number of streaming I/O buffers; default is
-   ten.  That number was carefully picked out of a hat and should not be
-   assumed to actually mean much of anything.
-
- - flip: If this boolean parameter is set, the sensor will be instructed to
-   invert the video image.  Whether it makes sense is determined by how
-   your particular camera is mounted.
diff --git a/Documentation/media/v4l-drivers/cardlist.rst b/Documentation/media/v4l-drivers/cardlist.rst
deleted file mode 100644
index 14249f47fbc2..000000000000
--- a/Documentation/media/v4l-drivers/cardlist.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Cards List
-==========
-
-.. toctree::
-	:maxdepth: 1
-
-	au0828-cardlist
-	bttv-cardlist
-	cx23885-cardlist
-	cx88-cardlist
-	em28xx-cardlist
-	ivtv-cardlist
-	saa7134-cardlist
-	saa7164-cardlist
-	tm6000-cardlist
-	tuner-cardlist
-	usbvision-cardlist
-	gspca-cardlist
diff --git a/Documentation/media/v4l-drivers/cpia2.rst b/Documentation/media/v4l-drivers/cpia2.rst
deleted file mode 100644
index a86baa1c83f1..000000000000
--- a/Documentation/media/v4l-drivers/cpia2.rst
+++ /dev/null
@@ -1,195 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The cpia2 driver
-================
-
-Authors: Peter Pregler <Peter_Pregler@email.com>,
-Scott J. Bertin <scottbertin@yahoo.com>, and
-Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which
-this one was modelled from.
-
-Introduction
-------------
-
-This is a driver for STMicroelectronics's CPiA2 (second generation
-Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG
-stream at up to vga size. It implements the Video4Linux interface as much as
-possible.  Since the V4L interface does not support compressed formats, only
-an mjpeg enabled application can be used with the camera. We have modified the
-gqcam application to view this stream.
-
-The driver is implemented as two kernel modules. The cpia2 module
-contains the camera functions and the V4L interface.  The cpia2_usb module
-contains usb specific functions.  The main reason for this was the size of the
-module was getting out of hand, so I separated them.  It is not likely that
-there will be a parallel port version.
-
-Features
---------
-
-- Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos
-  sensors. I only have the vga sensor, so can't test the other.
-- Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between.
-  VGA and QVGA are the native image sizes for the VGA camera. CIF is done
-  in the coprocessor by scaling QVGA.  All other sizes are done by clipping.
-- Palette: YCrCb, compressed with MJPEG.
-- Some compression parameters are settable.
-- Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA).
-- Adjust brightness, color, contrast while streaming.
-- Flicker control settable for 50 or 60 Hz mains frequency.
-
-Making and installing the stv672 driver modules
------------------------------------------------
-
-Requirements
-~~~~~~~~~~~~
-
-Video4Linux must be either compiled into the kernel or
-available as a module.  Video4Linux2 is automatically detected and made
-available at compile time.
-
-Setup
-~~~~~
-
-Use 'modprobe cpia2' to load and 'modprobe -r cpia2' to unload. This
-may be done automatically by your distribution.
-
-Driver options
-~~~~~~~~~~~~~~
-
-.. tabularcolumns:: |p{13ex}|L|
-
-
-==============  ========================================================
-Option		Description
-==============  ========================================================
-video_nr	video device to register (0=/dev/video0, etc)
-		range -1 to 64.  default is -1 (first available)
-		If you have more than 1 camera, this MUST be -1.
-buffer_size	Size for each frame buffer in bytes (default 68k)
-num_buffers	Number of frame buffers (1-32, default 3)
-alternate	USB Alternate (2-7, default 7)
-flicker_freq	Frequency for flicker reduction(50 or 60, default 60)
-flicker_mode	0 to disable, or 1 to enable flicker reduction.
-		(default 0). This is only effective if the camera
-		uses a stv0672 coprocessor.
-==============  ========================================================
-
-Setting the options
-~~~~~~~~~~~~~~~~~~~
-
-If you are using modules, edit /etc/modules.conf and add an options
-line like this:
-
-.. code-block:: none
-
-	options cpia2 num_buffers=3 buffer_size=65535
-
-If the driver is compiled into the kernel, at boot time specify them
-like this:
-
-.. code-block:: none
-
-	cpia2.num_buffers=3 cpia2.buffer_size=65535
-
-What buffer size should I use?
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The maximum image size depends on the alternate you choose, and the
-frame rate achieved by the camera.  If the compression engine is able to
-keep up with the frame rate, the maximum image size is given by the table
-below.
-
-The compression engine starts out at maximum compression, and will
-increase image quality until it is close to the size in the table.  As long
-as the compression engine can keep up with the frame rate, after a short time
-the images will all be about the size in the table, regardless of resolution.
-
-At low alternate settings, the compression engine may not be able to
-compress the image enough and will reduce the frame rate by producing larger
-images.
-
-The default of 68k should be good for most users.  This will handle
-any alternate at frame rates down to 15fps.  For lower frame rates, it may
-be necessary to increase the buffer size to avoid having frames dropped due
-to insufficient space.
-
-========== ========== ======== =====
-Alternate  bytes/ms   15fps    30fps
-========== ========== ======== =====
-    2         128      8533     4267
-    3         384     25600    12800
-    4         640     42667    21333
-    5         768     51200    25600
-    6         896     59733    29867
-    7        1023     68200    34100
-========== ========== ======== =====
-
-Table: Image size(bytes)
-
-
-How many buffers should I use?
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-For normal streaming, 3 should give the best results.  With only 2,
-it is possible for the camera to finish sending one image just after a
-program has started reading the other.  If this happens, the driver must drop
-a frame.  The exception to this is if you have a heavily loaded machine.  In
-this case use 2 buffers.  You are probably not reading at the full frame rate.
-If the camera can send multiple images before a read finishes, it could
-overwrite the third buffer before the read finishes, leading to a corrupt
-image.  Single and double buffering have extra checks to avoid overwriting.
-
-Using the camera
-~~~~~~~~~~~~~~~~
-
-We are providing a modified gqcam application to view the output. In
-order to avoid confusion, here it is called mview.  There is also the qx5view
-program which can also control the lights on the qx5 microscope. MJPEG Tools
-(http://mjpeg.sourceforge.net) can also be used to record from the camera.
-
-Notes to developers
-~~~~~~~~~~~~~~~~~~~
-
-   - This is a driver version stripped of the 2.4 back compatibility
-     and old MJPEG ioctl API. See cpia2.sf.net for 2.4 support.
-
-Programmer's overview of cpia2 driver
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Cpia2 is the second generation video coprocessor from VLSI Vision Ltd (now a
-division of ST Microelectronics).  There are two versions.  The first is the
-STV0672, which is capable of up to 30 frames per second (fps) in frame sizes
-up to CIF, and 15 fps for VGA frames.  The STV0676 is an improved version,
-which can handle up to 30 fps VGA.  Both coprocessors can be attached to two
-CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor.  These will
-be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors.
-
-The two chipsets operate almost identically.  The core is an 8051 processor,
-running two different versions of firmware.  The 672 runs the VP4 video
-processor code, the 676 runs VP5.  There are a few differences in register
-mappings for the two chips.  In these cases, the symbols defined in the
-header files are marked with VP4 or VP5 as part of the symbol name.
-
-The cameras appear externally as three sets of registers. Setting register
-values is the only way to control the camera.  Some settings are
-interdependant, such as the sequence required to power up the camera. I will
-try to make note of all of these cases.
-
-The register sets are called blocks.  Block 0 is the system block.  This
-section is always powered on when the camera is plugged in.  It contains
-registers that control housekeeping functions such as powering up the video
-processor.  The video processor is the VP block.  These registers control
-how the video from the sensor is processed.  Examples are timing registers,
-user mode (vga, qvga), scaling, cropping, framerates, and so on.  The last
-block is the video compressor (VC).  The video stream sent from the camera is
-compressed as Motion JPEG (JPEGA).  The VC controls all of the compression
-parameters.  Looking at the file cpia2_registers.h, you can get a full view
-of these registers and the possible values for most of them.
-
-One or more registers can be set or read by sending a usb control message to
-the camera.  There are three modes for this.  Block mode requests a number
-of contiguous registers.  Random mode reads or writes random registers with
-a tuple structure containing address/value pairs.  The repeat mode is only
-used by VP4 to load a firmware patch.  It contains a starting address and
-a sequence of bytes to be written into a gpio port.
diff --git a/Documentation/media/v4l-drivers/cx2341x.rst b/Documentation/media/v4l-drivers/cx2341x.rst
deleted file mode 100644
index 8ca37deb56b6..000000000000
--- a/Documentation/media/v4l-drivers/cx2341x.rst
+++ /dev/null
@@ -1,3860 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The cx2341x driver
-==================
-
-Memory at cx2341x chips
------------------------
-
-This section describes the cx2341x memory map and documents some of the
-register space.
-
-.. note:: the memory long words are little-endian ('intel format').
-
-.. warning::
-
-	This information was figured out from searching through the memory
-	and registers, this information may not be correct and is certainly
-	not complete, and was not derived from anything more than searching
-	through the memory space with commands like:
-
-	.. code-block:: none
-
-		ivtvctl -O min=0x02000000,max=0x020000ff
-
-	So take this as is, I'm always searching for more stuff, it's a large
-	register space :-).
-
-Memory Map
-~~~~~~~~~~
-
-The cx2341x exposes its entire 64M memory space to the PCI host via the PCI BAR0
-(Base Address Register 0). The addresses here are offsets relative to the
-address held in BAR0.
-
-.. code-block:: none
-
-	0x00000000-0x00ffffff Encoder memory space
-	0x00000000-0x0003ffff Encode.rom
-	???-???         MPEG buffer(s)
-	???-???         Raw video capture buffer(s)
-	???-???         Raw audio capture buffer(s)
-	???-???         Display buffers (6 or 9)
-
-	0x01000000-0x01ffffff Decoder memory space
-	0x01000000-0x0103ffff Decode.rom
-	???-???         MPEG buffers(s)
-	0x0114b000-0x0115afff Audio.rom (deprecated?)
-
-	0x02000000-0x0200ffff Register Space
-
-Registers
-~~~~~~~~~
-
-The registers occupy the 64k space starting at the 0x02000000 offset from BAR0.
-All of these registers are 32 bits wide.
-
-.. code-block:: none
-
-	DMA Registers 0x000-0xff:
-
-	0x00 - Control:
-		0=reset/cancel, 1=read, 2=write, 4=stop
-	0x04 - DMA status:
-		1=read busy, 2=write busy, 4=read error, 8=write error, 16=link list error
-	0x08 - pci DMA pointer for read link list
-	0x0c - pci DMA pointer for write link list
-	0x10 - read/write DMA enable:
-		1=read enable, 2=write enable
-	0x14 - always 0xffffffff, if set any lower instability occurs, 0x00 crashes
-	0x18 - ??
-	0x1c - always 0x20 or 32, smaller values slow down DMA transactions
-	0x20 - always value of 0x780a010a
-	0x24-0x3c - usually just random values???
-	0x40 - Interrupt status
-	0x44 - Write a bit here and shows up in Interrupt status 0x40
-	0x48 - Interrupt Mask
-	0x4C - always value of 0xfffdffff,
-		if changed to 0xffffffff DMA write interrupts break.
-	0x50 - always 0xffffffff
-	0x54 - always 0xffffffff (0x4c, 0x50, 0x54 seem like interrupt masks, are
-		3 processors on chip, Java ones, VPU, SPU, APU, maybe these are the
-		interrupt masks???).
-	0x60-0x7C - random values
-	0x80 - first write linked list reg, for Encoder Memory addr
-	0x84 - first write linked list reg, for pci memory addr
-	0x88 - first write linked list reg, for length of buffer in memory addr
-		(|0x80000000 or this for last link)
-	0x8c-0xdc - rest of write linked list reg, 8 sets of 3 total, DMA goes here
-		from linked list addr in reg 0x0c, firmware must push through or
-		something.
-	0xe0 - first (and only) read linked list reg, for pci memory addr
-	0xe4 - first (and only) read linked list reg, for Decoder memory addr
-	0xe8 - first (and only) read linked list reg, for length of buffer
-	0xec-0xff - Nothing seems to be in these registers, 0xec-f4 are 0x00000000.
-
-Memory locations for Encoder Buffers 0x700-0x7ff:
-
-These registers show offsets of memory locations pertaining to each
-buffer area used for encoding, have to shift them by <<1 first.
-
-- 0x07F8: Encoder SDRAM refresh
-- 0x07FC: Encoder SDRAM pre-charge
-
-Memory locations for Decoder Buffers 0x800-0x8ff:
-
-These registers show offsets of memory locations pertaining to each
-buffer area used for decoding, have to shift them by <<1 first.
-
-- 0x08F8: Decoder SDRAM refresh
-- 0x08FC: Decoder SDRAM pre-charge
-
-Other memory locations:
-
-- 0x2800: Video Display Module control
-- 0x2D00: AO (audio output?) control
-- 0x2D24: Bytes Flushed
-- 0x7000: LSB I2C write clock bit (inverted)
-- 0x7004: LSB I2C write data bit (inverted)
-- 0x7008: LSB I2C read clock bit
-- 0x700c: LSB I2C read data bit
-- 0x9008: GPIO get input state
-- 0x900c: GPIO set output state
-- 0x9020: GPIO direction (Bit7 (GPIO 0..7) - 0:input, 1:output)
-- 0x9050: SPU control
-- 0x9054: Reset HW blocks
-- 0x9058: VPU control
-- 0xA018: Bit6: interrupt pending?
-- 0xA064: APU command
-
-
-Interrupt Status Register
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The definition of the bits in the interrupt status register 0x0040, and the
-interrupt mask 0x0048. If a bit is cleared in the mask, then we want our ISR to
-execute.
-
-- bit 31 Encoder Start Capture
-- bit 30 Encoder EOS
-- bit 29 Encoder VBI capture
-- bit 28 Encoder Video Input Module reset event
-- bit 27 Encoder DMA complete
-- bit 24 Decoder audio mode change detection event (through event notification)
-- bit 22 Decoder data request
-- bit 20 Decoder DMA complete
-- bit 19 Decoder VBI re-insertion
-- bit 18 Decoder DMA err (linked-list bad)
-
-Missing documentation
----------------------
-
-- Encoder API post(?)
-- Decoder API post(?)
-- Decoder VTRACE event
-
-
-The cx2341x firmware upload
----------------------------
-
-This document describes how to upload the cx2341x firmware to the card.
-
-How to find
-~~~~~~~~~~~
-
-See the web pages of the various projects that uses this chip for information
-on how to obtain the firmware.
-
-The firmware stored in a Windows driver can be detected as follows:
-
-- Each firmware image is 256k bytes.
-- The 1st 32-bit word of the Encoder image is 0x0000da7
-- The 1st 32-bit word of the Decoder image is 0x00003a7
-- The 2nd 32-bit word of both images is 0xaa55bb66
-
-How to load
-~~~~~~~~~~~
-
-- Issue the FWapi command to stop the encoder if it is running. Wait for the
-  command to complete.
-- Issue the FWapi command to stop the decoder if it is running. Wait for the
-  command to complete.
-- Issue the I2C command to the digitizer to stop emitting VSYNC events.
-- Issue the FWapi command to halt the encoder's firmware.
-- Sleep for 10ms.
-- Issue the FWapi command to halt the decoder's firmware.
-- Sleep for 10ms.
-- Write 0x00000000 to register 0x2800 to stop the Video Display Module.
-- Write 0x00000005 to register 0x2D00 to stop the AO (audio output?).
-- Write 0x00000000 to register 0xA064 to ping? the APU.
-- Write 0xFFFFFFFE to register 0x9058 to stop the VPU.
-- Write 0xFFFFFFFF to register 0x9054 to reset the HW blocks.
-- Write 0x00000001 to register 0x9050 to stop the SPU.
-- Sleep for 10ms.
-- Write 0x0000001A to register 0x07FC to init the Encoder SDRAM's pre-charge.
-- Write 0x80000640 to register 0x07F8 to init the Encoder SDRAM's refresh to 1us.
-- Write 0x0000001A to register 0x08FC to init the Decoder SDRAM's pre-charge.
-- Write 0x80000640 to register 0x08F8 to init the Decoder SDRAM's refresh to 1us.
-- Sleep for 512ms. (600ms is recommended)
-- Transfer the encoder's firmware image to offset 0 in Encoder memory space.
-- Transfer the decoder's firmware image to offset 0 in Decoder memory space.
-- Use a read-modify-write operation to Clear bit 0 of register 0x9050 to
-  re-enable the SPU.
-- Sleep for 1 second.
-- Use a read-modify-write operation to Clear bits 3 and 0 of register 0x9058
-  to re-enable the VPU.
-- Sleep for 1 second.
-- Issue status API commands to both firmware images to verify.
-
-
-How to call the firmware API
-----------------------------
-
-The preferred calling convention is known as the firmware mailbox. The
-mailboxes are basically a fixed length array that serves as the call-stack.
-
-Firmware mailboxes can be located by searching the encoder and decoder memory
-for a 16 byte signature. That signature will be located on a 256-byte boundary.
-
-Signature:
-
-.. code-block:: none
-
-	0x78, 0x56, 0x34, 0x12, 0x12, 0x78, 0x56, 0x34,
-	0x34, 0x12, 0x78, 0x56, 0x56, 0x34, 0x12, 0x78
-
-The firmware implements 20 mailboxes of 20 32-bit words. The first 10 are
-reserved for API calls. The second 10 are used by the firmware for event
-notification.
-
-  ====== =================
-  Index  Name
-  ====== =================
-  0      Flags
-  1      Command
-  2      Return value
-  3      Timeout
-  4-19   Parameter/Result
-  ====== =================
-
-
-The flags are defined in the following table. The direction is from the
-perspective of the firmware.
-
-  ==== ========== ============================================
-  Bit  Direction  Purpose
-  ==== ========== ============================================
-  2    O          Firmware has processed the command.
-  1    I          Driver has finished setting the parameters.
-  0    I          Driver is using this mailbox.
-  ==== ========== ============================================
-
-The command is a 32-bit enumerator. The API specifics may be found in this
-chapter.
-
-The return value is a 32-bit enumerator. Only two values are currently defined:
-
-- 0=success
-- -1=command undefined.
-
-There are 16 parameters/results 32-bit fields. The driver populates these fields
-with values for all the parameters required by the call. The driver overwrites
-these fields with result values returned by the call.
-
-The timeout value protects the card from a hung driver thread. If the driver
-doesn't handle the completed call within the timeout specified, the firmware
-will reset that mailbox.
-
-To make an API call, the driver iterates over each mailbox looking for the
-first one available (bit 0 has been cleared). The driver sets that bit, fills
-in the command enumerator, the timeout value and any required parameters. The
-driver then sets the parameter ready bit (bit 1). The firmware scans the
-mailboxes for pending commands, processes them, sets the result code, populates
-the result value array with that call's return values and sets the call
-complete bit (bit 2). Once bit 2 is set, the driver should retrieve the results
-and clear all the flags. If the driver does not perform this task within the
-time set in the timeout register, the firmware will reset that mailbox.
-
-Event notifications are sent from the firmware to the host. The host tells the
-firmware which events it is interested in via an API call. That call tells the
-firmware which notification mailbox to use. The firmware signals the host via
-an interrupt. Only the 16 Results fields are used, the Flags, Command, Return
-value and Timeout words are not used.
-
-
-OSD firmware API description
-----------------------------
-
-.. note:: this API is part of the decoder firmware, so it's cx23415 only.
-
-
-
-CX2341X_OSD_GET_FRAMEBUFFER
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 65/0x41
-
-Description
-^^^^^^^^^^^
-
-Return base and length of contiguous OSD memory.
-
-Result[0]
-^^^^^^^^^
-
-OSD base address
-
-Result[1]
-^^^^^^^^^
-
-OSD length
-
-
-
-CX2341X_OSD_GET_PIXEL_FORMAT
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 66/0x42
-
-Description
-^^^^^^^^^^^
-
-Query OSD format
-
-Result[0]
-^^^^^^^^^
-
-0=8bit index
-1=16bit RGB 5:6:5
-2=16bit ARGB 1:5:5:5
-3=16bit ARGB 1:4:4:4
-4=32bit ARGB 8:8:8:8
-
-
-
-CX2341X_OSD_SET_PIXEL_FORMAT
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 67/0x43
-
-Description
-^^^^^^^^^^^
-
-Assign pixel format
-
-Param[0]
-^^^^^^^^
-
-- 0=8bit index
-- 1=16bit RGB 5:6:5
-- 2=16bit ARGB 1:5:5:5
-- 3=16bit ARGB 1:4:4:4
-- 4=32bit ARGB 8:8:8:8
-
-
-
-CX2341X_OSD_GET_STATE
-~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 68/0x44
-
-Description
-^^^^^^^^^^^
-
-Query OSD state
-
-Result[0]
-^^^^^^^^^
-
-- Bit  0   0=off, 1=on
-- Bits 1:2 alpha control
-- Bits 3:5 pixel format
-
-
-
-CX2341X_OSD_SET_STATE
-~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 69/0x45
-
-Description
-^^^^^^^^^^^
-
-OSD switch
-
-Param[0]
-^^^^^^^^
-
-0=off, 1=on
-
-
-
-CX2341X_OSD_GET_OSD_COORDS
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 70/0x46
-
-Description
-^^^^^^^^^^^
-
-Retrieve coordinates of OSD area blended with video
-
-Result[0]
-^^^^^^^^^
-
-OSD buffer address
-
-Result[1]
-^^^^^^^^^
-
-Stride in pixels
-
-Result[2]
-^^^^^^^^^
-
-Lines in OSD buffer
-
-Result[3]
-^^^^^^^^^
-
-Horizontal offset in buffer
-
-Result[4]
-^^^^^^^^^
-
-Vertical offset in buffer
-
-
-
-CX2341X_OSD_SET_OSD_COORDS
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 71/0x47
-
-Description
-^^^^^^^^^^^
-
-Assign the coordinates of the OSD area to blend with video
-
-Param[0]
-^^^^^^^^
-
-buffer address
-
-Param[1]
-^^^^^^^^
-
-buffer stride in pixels
-
-Param[2]
-^^^^^^^^
-
-lines in buffer
-
-Param[3]
-^^^^^^^^
-
-horizontal offset
-
-Param[4]
-^^^^^^^^
-
-vertical offset
-
-
-
-CX2341X_OSD_GET_SCREEN_COORDS
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 72/0x48
-
-Description
-^^^^^^^^^^^
-
-Retrieve OSD screen area coordinates
-
-Result[0]
-^^^^^^^^^
-
-top left horizontal offset
-
-Result[1]
-^^^^^^^^^
-
-top left vertical offset
-
-Result[2]
-^^^^^^^^^
-
-bottom right horizontal offset
-
-Result[3]
-^^^^^^^^^
-
-bottom right vertical offset
-
-
-
-CX2341X_OSD_SET_SCREEN_COORDS
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 73/0x49
-
-Description
-^^^^^^^^^^^
-
-Assign the coordinates of the screen area to blend with video
-
-Param[0]
-^^^^^^^^
-
-top left horizontal offset
-
-Param[1]
-^^^^^^^^
-
-top left vertical offset
-
-Param[2]
-^^^^^^^^
-
-bottom left horizontal offset
-
-Param[3]
-^^^^^^^^
-
-bottom left vertical offset
-
-
-
-CX2341X_OSD_GET_GLOBAL_ALPHA
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 74/0x4A
-
-Description
-^^^^^^^^^^^
-
-Retrieve OSD global alpha
-
-Result[0]
-^^^^^^^^^
-
-global alpha: 0=off, 1=on
-
-Result[1]
-^^^^^^^^^
-
-bits 0:7 global alpha
-
-
-
-CX2341X_OSD_SET_GLOBAL_ALPHA
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 75/0x4B
-
-Description
-^^^^^^^^^^^
-
-Update global alpha
-
-Param[0]
-^^^^^^^^
-
-global alpha: 0=off, 1=on
-
-Param[1]
-^^^^^^^^
-
-global alpha (8 bits)
-
-Param[2]
-^^^^^^^^
-
-local alpha: 0=on, 1=off
-
-
-
-CX2341X_OSD_SET_BLEND_COORDS
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 78/0x4C
-
-Description
-^^^^^^^^^^^
-
-Move start of blending area within display buffer
-
-Param[0]
-^^^^^^^^
-
-horizontal offset in buffer
-
-Param[1]
-^^^^^^^^
-
-vertical offset in buffer
-
-
-
-CX2341X_OSD_GET_FLICKER_STATE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 79/0x4F
-
-Description
-^^^^^^^^^^^
-
-Retrieve flicker reduction module state
-
-Result[0]
-^^^^^^^^^
-
-flicker state: 0=off, 1=on
-
-
-
-CX2341X_OSD_SET_FLICKER_STATE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 80/0x50
-
-Description
-^^^^^^^^^^^
-
-Set flicker reduction module state
-
-Param[0]
-^^^^^^^^
-
-State: 0=off, 1=on
-
-
-
-CX2341X_OSD_BLT_COPY
-~~~~~~~~~~~~~~~~~~~~
-
-Enum: 82/0x52
-
-Description
-^^^^^^^^^^^
-
-BLT copy
-
-Param[0]
-^^^^^^^^
-
-.. code-block:: none
-
-	'0000'  zero
-	'0001' ~destination AND ~source
-	'0010' ~destination AND  source
-	'0011' ~destination
-	'0100'  destination AND ~source
-	'0101'                  ~source
-	'0110'  destination XOR  source
-	'0111' ~destination OR  ~source
-	'1000' ~destination AND ~source
-	'1001'  destination XNOR source
-	'1010'                   source
-	'1011' ~destination OR   source
-	'1100'  destination
-	'1101'  destination OR  ~source
-	'1110'  destination OR   source
-	'1111'  one
-
-
-Param[1]
-^^^^^^^^
-
-Resulting alpha blending
-
-- '01' source_alpha
-- '10' destination_alpha
-- '11' source_alpha*destination_alpha+1
-  (zero if both source and destination alpha are zero)
-
-Param[2]
-^^^^^^^^
-
-.. code-block:: none
-
-	'00' output_pixel = source_pixel
-
-	'01' if source_alpha=0:
-		 output_pixel = destination_pixel
-	     if 256 > source_alpha > 1:
-		 output_pixel = ((source_alpha + 1)*source_pixel +
-				 (255 - source_alpha)*destination_pixel)/256
-
-	'10' if destination_alpha=0:
-		 output_pixel = source_pixel
-	      if 255 > destination_alpha > 0:
-		 output_pixel = ((255 - destination_alpha)*source_pixel +
-				 (destination_alpha + 1)*destination_pixel)/256
-
-	'11' if source_alpha=0:
-		 source_temp = 0
-	     if source_alpha=255:
-		 source_temp = source_pixel*256
-	     if 255 > source_alpha > 0:
-		 source_temp = source_pixel*(source_alpha + 1)
-	     if destination_alpha=0:
-		 destination_temp = 0
-	     if destination_alpha=255:
-		 destination_temp = destination_pixel*256
-	     if 255 > destination_alpha > 0:
-		 destination_temp = destination_pixel*(destination_alpha + 1)
-	     output_pixel = (source_temp + destination_temp)/256
-
-Param[3]
-^^^^^^^^
-
-width
-
-Param[4]
-^^^^^^^^
-
-height
-
-Param[5]
-^^^^^^^^
-
-destination pixel mask
-
-Param[6]
-^^^^^^^^
-
-destination rectangle start address
-
-Param[7]
-^^^^^^^^
-
-destination stride in dwords
-
-Param[8]
-^^^^^^^^
-
-source stride in dwords
-
-Param[9]
-^^^^^^^^
-
-source rectangle start address
-
-
-
-CX2341X_OSD_BLT_FILL
-~~~~~~~~~~~~~~~~~~~~
-
-Enum: 83/0x53
-
-Description
-^^^^^^^^^^^
-
-BLT fill color
-
-Param[0]
-^^^^^^^^
-
-Same as Param[0] on API 0x52
-
-Param[1]
-^^^^^^^^
-
-Same as Param[1] on API 0x52
-
-Param[2]
-^^^^^^^^
-
-Same as Param[2] on API 0x52
-
-Param[3]
-^^^^^^^^
-
-width
-
-Param[4]
-^^^^^^^^
-
-height
-
-Param[5]
-^^^^^^^^
-
-destination pixel mask
-
-Param[6]
-^^^^^^^^
-
-destination rectangle start address
-
-Param[7]
-^^^^^^^^
-
-destination stride in dwords
-
-Param[8]
-^^^^^^^^
-
-color fill value
-
-
-
-CX2341X_OSD_BLT_TEXT
-~~~~~~~~~~~~~~~~~~~~
-
-Enum: 84/0x54
-
-Description
-^^^^^^^^^^^
-
-BLT for 8 bit alpha text source
-
-Param[0]
-^^^^^^^^
-
-Same as Param[0] on API 0x52
-
-Param[1]
-^^^^^^^^
-
-Same as Param[1] on API 0x52
-
-Param[2]
-^^^^^^^^
-
-Same as Param[2] on API 0x52
-
-Param[3]
-^^^^^^^^
-
-width
-
-Param[4]
-^^^^^^^^
-
-height
-
-Param[5]
-^^^^^^^^
-
-destination pixel mask
-
-Param[6]
-^^^^^^^^
-
-destination rectangle start address
-
-Param[7]
-^^^^^^^^
-
-destination stride in dwords
-
-Param[8]
-^^^^^^^^
-
-source stride in dwords
-
-Param[9]
-^^^^^^^^
-
-source rectangle start address
-
-Param[10]
-^^^^^^^^^
-
-color fill value
-
-
-
-CX2341X_OSD_SET_FRAMEBUFFER_WINDOW
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 86/0x56
-
-Description
-^^^^^^^^^^^
-
-Positions the main output window on the screen. The coordinates must be
-such that the entire window fits on the screen.
-
-Param[0]
-^^^^^^^^
-
-window width
-
-Param[1]
-^^^^^^^^
-
-window height
-
-Param[2]
-^^^^^^^^
-
-top left window corner horizontal offset
-
-Param[3]
-^^^^^^^^
-
-top left window corner vertical offset
-
-
-
-CX2341X_OSD_SET_CHROMA_KEY
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 96/0x60
-
-Description
-^^^^^^^^^^^
-
-Chroma key switch and color
-
-Param[0]
-^^^^^^^^
-
-state: 0=off, 1=on
-
-Param[1]
-^^^^^^^^
-
-color
-
-
-
-CX2341X_OSD_GET_ALPHA_CONTENT_INDEX
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 97/0x61
-
-Description
-^^^^^^^^^^^
-
-Retrieve alpha content index
-
-Result[0]
-^^^^^^^^^
-
-alpha content index, Range 0:15
-
-
-
-CX2341X_OSD_SET_ALPHA_CONTENT_INDEX
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 98/0x62
-
-Description
-^^^^^^^^^^^
-
-Assign alpha content index
-
-Param[0]
-^^^^^^^^
-
-alpha content index, range 0:15
-
-
-Encoder firmware API description
---------------------------------
-
-CX2341X_ENC_PING_FW
-~~~~~~~~~~~~~~~~~~~
-
-Enum: 128/0x80
-
-Description
-^^^^^^^^^^^
-
-Does nothing. Can be used to check if the firmware is responding.
-
-
-
-CX2341X_ENC_START_CAPTURE
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 129/0x81
-
-Description
-^^^^^^^^^^^
-
-Commences the capture of video, audio and/or VBI data. All encoding
-parameters must be initialized prior to this API call. Captures frames
-continuously or until a predefined number of frames have been captured.
-
-Param[0]
-^^^^^^^^
-
-Capture stream type:
-
-	- 0=MPEG
-	- 1=Raw
-	- 2=Raw passthrough
-	- 3=VBI
-
-
-Param[1]
-^^^^^^^^
-
-Bitmask:
-
-	- Bit 0 when set, captures YUV
-	- Bit 1 when set, captures PCM audio
-	- Bit 2 when set, captures VBI (same as param[0]=3)
-	- Bit 3 when set, the capture destination is the decoder
-	  (same as param[0]=2)
-	- Bit 4 when set, the capture destination is the host
-
-.. note:: this parameter is only meaningful for RAW capture type.
-
-
-
-CX2341X_ENC_STOP_CAPTURE
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 130/0x82
-
-Description
-^^^^^^^^^^^
-
-Ends a capture in progress
-
-Param[0]
-^^^^^^^^
-
-- 0=stop at end of GOP (generates IRQ)
-- 1=stop immediate (no IRQ)
-
-Param[1]
-^^^^^^^^
-
-Stream type to stop, see param[0] of API 0x81
-
-Param[2]
-^^^^^^^^
-
-Subtype, see param[1] of API 0x81
-
-
-
-CX2341X_ENC_SET_AUDIO_ID
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 137/0x89
-
-Description
-^^^^^^^^^^^
-
-Assigns the transport stream ID of the encoded audio stream
-
-Param[0]
-^^^^^^^^
-
-Audio Stream ID
-
-
-
-CX2341X_ENC_SET_VIDEO_ID
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 139/0x8B
-
-Description
-^^^^^^^^^^^
-
-Set video transport stream ID
-
-Param[0]
-^^^^^^^^
-
-Video stream ID
-
-
-
-CX2341X_ENC_SET_PCR_ID
-~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 141/0x8D
-
-Description
-^^^^^^^^^^^
-
-Assigns the transport stream ID for PCR packets
-
-Param[0]
-^^^^^^^^
-
-PCR Stream ID
-
-
-
-CX2341X_ENC_SET_FRAME_RATE
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 143/0x8F
-
-Description
-^^^^^^^^^^^
-
-Set video frames per second. Change occurs at start of new GOP.
-
-Param[0]
-^^^^^^^^
-
-- 0=30fps
-- 1=25fps
-
-
-
-CX2341X_ENC_SET_FRAME_SIZE
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 145/0x91
-
-Description
-^^^^^^^^^^^
-
-Select video stream encoding resolution.
-
-Param[0]
-^^^^^^^^
-
-Height in lines. Default 480
-
-Param[1]
-^^^^^^^^
-
-Width in pixels. Default 720
-
-
-
-CX2341X_ENC_SET_BIT_RATE
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 149/0x95
-
-Description
-^^^^^^^^^^^
-
-Assign average video stream bitrate.
-
-Param[0]
-^^^^^^^^
-
-0=variable bitrate, 1=constant bitrate
-
-Param[1]
-^^^^^^^^
-
-bitrate in bits per second
-
-Param[2]
-^^^^^^^^
-
-peak bitrate in bits per second, divided by 400
-
-Param[3]
-^^^^^^^^
-
-Mux bitrate in bits per second, divided by 400. May be 0 (default).
-
-Param[4]
-^^^^^^^^
-
-Rate Control VBR Padding
-
-Param[5]
-^^^^^^^^
-
-VBV Buffer used by encoder
-
-.. note::
-
-	#) Param\[3\] and Param\[4\] seem to be always 0
-	#) Param\[5\] doesn't seem to be used.
-
-
-
-CX2341X_ENC_SET_GOP_PROPERTIES
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 151/0x97
-
-Description
-^^^^^^^^^^^
-
-Setup the GOP structure
-
-Param[0]
-^^^^^^^^
-
-GOP size (maximum is 34)
-
-Param[1]
-^^^^^^^^
-
-Number of B frames between the I and P frame, plus 1.
-For example: IBBPBBPBBPBB --> GOP size: 12, number of B frames: 2+1 = 3
-
-.. note::
-
-	GOP size must be a multiple of (B-frames + 1).
-
-
-
-CX2341X_ENC_SET_ASPECT_RATIO
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 153/0x99
-
-Description
-^^^^^^^^^^^
-
-Sets the encoding aspect ratio. Changes in the aspect ratio take effect
-at the start of the next GOP.
-
-Param[0]
-^^^^^^^^
-
-- '0000' forbidden
-- '0001' 1:1 square
-- '0010' 4:3
-- '0011' 16:9
-- '0100' 2.21:1
-- '0101' to '1111' reserved
-
-
-
-CX2341X_ENC_SET_DNR_FILTER_MODE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 155/0x9B
-
-Description
-^^^^^^^^^^^
-
-Assign Dynamic Noise Reduction operating mode
-
-Param[0]
-^^^^^^^^
-
-Bit0: Spatial filter, set=auto, clear=manual
-Bit1: Temporal filter, set=auto, clear=manual
-
-Param[1]
-^^^^^^^^
-
-Median filter:
-
-- 0=Disabled
-- 1=Horizontal
-- 2=Vertical
-- 3=Horiz/Vert
-- 4=Diagonal
-
-
-
-CX2341X_ENC_SET_DNR_FILTER_PROPS
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 157/0x9D
-
-Description
-^^^^^^^^^^^
-
-These Dynamic Noise Reduction filter values are only meaningful when
-the respective filter is set to "manual" (See API 0x9B)
-
-Param[0]
-^^^^^^^^
-
-Spatial filter: default 0, range 0:15
-
-Param[1]
-^^^^^^^^
-
-Temporal filter: default 0, range 0:31
-
-
-
-CX2341X_ENC_SET_CORING_LEVELS
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 159/0x9F
-
-Description
-^^^^^^^^^^^
-
-Assign Dynamic Noise Reduction median filter properties.
-
-Param[0]
-^^^^^^^^
-
-Threshold above which the luminance median filter is enabled.
-Default: 0, range 0:255
-
-Param[1]
-^^^^^^^^
-
-Threshold below which the luminance median filter is enabled.
-Default: 255, range 0:255
-
-Param[2]
-^^^^^^^^
-
-Threshold above which the chrominance median filter is enabled.
-Default: 0, range 0:255
-
-Param[3]
-^^^^^^^^
-
-Threshold below which the chrominance median filter is enabled.
-Default: 255, range 0:255
-
-
-
-CX2341X_ENC_SET_SPATIAL_FILTER_TYPE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 161/0xA1
-
-Description
-^^^^^^^^^^^
-
-Assign spatial prefilter parameters
-
-Param[0]
-^^^^^^^^
-
-Luminance filter
-
-- 0=Off
-- 1=1D Horizontal
-- 2=1D Vertical
-- 3=2D H/V Separable (default)
-- 4=2D Symmetric non-separable
-
-Param[1]
-^^^^^^^^
-
-Chrominance filter
-
-- 0=Off
-- 1=1D Horizontal (default)
-
-
-
-CX2341X_ENC_SET_VBI_LINE
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 183/0xB7
-
-Description
-^^^^^^^^^^^
-
-Selects VBI line number.
-
-Param[0]
-^^^^^^^^
-
-- Bits 0:4 	line number
-- Bit  31		0=top_field, 1=bottom_field
-- Bits 0:31 	all set specifies "all lines"
-
-Param[1]
-^^^^^^^^
-
-VBI line information features: 0=disabled, 1=enabled
-
-Param[2]
-^^^^^^^^
-
-Slicing: 0=None, 1=Closed Caption
-Almost certainly not implemented. Set to 0.
-
-Param[3]
-^^^^^^^^
-
-Luminance samples in this line.
-Almost certainly not implemented. Set to 0.
-
-Param[4]
-^^^^^^^^
-
-Chrominance samples in this line
-Almost certainly not implemented. Set to 0.
-
-
-
-CX2341X_ENC_SET_STREAM_TYPE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 185/0xB9
-
-Description
-^^^^^^^^^^^
-
-Assign stream type
-
-.. note::
-
-	Transport stream is not working in recent firmwares.
-	And in older firmwares the timestamps in the TS seem to be
-	unreliable.
-
-Param[0]
-^^^^^^^^
-
-- 0=Program stream
-- 1=Transport stream
-- 2=MPEG1 stream
-- 3=PES A/V stream
-- 5=PES Video stream
-- 7=PES Audio stream
-- 10=DVD stream
-- 11=VCD stream
-- 12=SVCD stream
-- 13=DVD_S1 stream
-- 14=DVD_S2 stream
-
-
-
-CX2341X_ENC_SET_OUTPUT_PORT
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 187/0xBB
-
-Description
-^^^^^^^^^^^
-
-Assign stream output port. Normally 0 when the data is copied through
-the PCI bus (DMA), and 1 when the data is streamed to another chip
-(pvrusb and cx88-blackbird).
-
-Param[0]
-^^^^^^^^
-
-- 0=Memory (default)
-- 1=Streaming
-- 2=Serial
-
-Param[1]
-^^^^^^^^
-
-Unknown, but leaving this to 0 seems to work best. Indications are that
-this might have to do with USB support, although passing anything but 0
-only breaks things.
-
-
-
-CX2341X_ENC_SET_AUDIO_PROPERTIES
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 189/0xBD
-
-Description
-^^^^^^^^^^^
-
-Set audio stream properties, may be called while encoding is in progress.
-
-.. note::
-
-	All bitfields are consistent with ISO11172 documentation except
-	bits 2:3 which ISO docs define as:
-
-	- '11' Layer I
-	- '10' Layer II
-	- '01' Layer III
-	- '00' Undefined
-
-	This discrepancy may indicate a possible error in the documentation.
-	Testing indicated that only Layer II is actually working, and that
-	the minimum bitrate should be 192 kbps.
-
-Param[0]
-^^^^^^^^
-
-Bitmask:
-
-.. code-block:: none
-
-	   0:1  '00' 44.1Khz
-		'01' 48Khz
-		'10' 32Khz
-		'11' reserved
-
-	   2:3  '01'=Layer I
-		'10'=Layer II
-
-	   4:7  Bitrate:
-		     Index | Layer I     | Layer II
-		     ------+-------------+------------
-		    '0000' | free format | free format
-		    '0001' |  32 kbit/s  |  32 kbit/s
-		    '0010' |  64 kbit/s  |  48 kbit/s
-		    '0011' |  96 kbit/s  |  56 kbit/s
-		    '0100' | 128 kbit/s  |  64 kbit/s
-		    '0101' | 160 kbit/s  |  80 kbit/s
-		    '0110' | 192 kbit/s  |  96 kbit/s
-		    '0111' | 224 kbit/s  | 112 kbit/s
-		    '1000' | 256 kbit/s  | 128 kbit/s
-		    '1001' | 288 kbit/s  | 160 kbit/s
-		    '1010' | 320 kbit/s  | 192 kbit/s
-		    '1011' | 352 kbit/s  | 224 kbit/s
-		    '1100' | 384 kbit/s  | 256 kbit/s
-		    '1101' | 416 kbit/s  | 320 kbit/s
-		    '1110' | 448 kbit/s  | 384 kbit/s
-
-		.. note::
-
-			For Layer II, not all combinations of total bitrate
-			and mode are allowed. See ISO11172-3 3-Annex B,
-			Table 3-B.2
-
-	   8:9  '00'=Stereo
-		'01'=JointStereo
-		'10'=Dual
-		'11'=Mono
-
-		.. note::
-
-			The cx23415 cannot decode Joint Stereo properly.
-
-	  10:11 Mode Extension used in joint_stereo mode.
-		In Layer I and II they indicate which subbands are in
-		intensity_stereo. All other subbands are coded in stereo.
-		    '00' subbands 4-31 in intensity_stereo, bound==4
-		    '01' subbands 8-31 in intensity_stereo, bound==8
-		    '10' subbands 12-31 in intensity_stereo, bound==12
-		    '11' subbands 16-31 in intensity_stereo, bound==16
-
-	  12:13 Emphasis:
-		    '00' None
-		    '01' 50/15uS
-		    '10' reserved
-		    '11' CCITT J.17
-
-	  14 	CRC:
-		    '0' off
-		    '1' on
-
-	  15    Copyright:
-		    '0' off
-		    '1' on
-
-	  16    Generation:
-		    '0' copy
-		    '1' original
-
-
-
-CX2341X_ENC_HALT_FW
-~~~~~~~~~~~~~~~~~~~
-
-Enum: 195/0xC3
-
-Description
-^^^^^^^^^^^
-
-The firmware is halted and no further API calls are serviced until the
-firmware is uploaded again.
-
-
-
-CX2341X_ENC_GET_VERSION
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 196/0xC4
-
-Description
-^^^^^^^^^^^
-
-Returns the version of the encoder firmware.
-
-Result[0]
-^^^^^^^^^
-
-Version bitmask:
-- Bits  0:15 build
-- Bits 16:23 minor
-- Bits 24:31 major
-
-
-
-CX2341X_ENC_SET_GOP_CLOSURE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 197/0xC5
-
-Description
-^^^^^^^^^^^
-
-Assigns the GOP open/close property.
-
-Param[0]
-^^^^^^^^
-
-- 0=Open
-- 1=Closed
-
-
-
-CX2341X_ENC_GET_SEQ_END
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 198/0xC6
-
-Description
-^^^^^^^^^^^
-
-Obtains the sequence end code of the encoder's buffer. When a capture
-is started a number of interrupts are still generated, the last of
-which will have Result[0] set to 1 and Result[1] will contain the size
-of the buffer.
-
-Result[0]
-^^^^^^^^^
-
-State of the transfer (1 if last buffer)
-
-Result[1]
-^^^^^^^^^
-
-If Result[0] is 1, this contains the size of the last buffer, undefined
-otherwise.
-
-
-
-CX2341X_ENC_SET_PGM_INDEX_INFO
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 199/0xC7
-
-Description
-^^^^^^^^^^^
-
-Sets the Program Index Information.
-The information is stored as follows:
-
-.. code-block:: c
-
-	struct info {
-		u32 length;		// Length of this frame
-		u32 offset_low;		// Offset in the file of the
-		u32 offset_high;	// start of this frame
-		u32 mask1;		// Bits 0-2 are the type mask:
-					// 1=I, 2=P, 4=B
-					// 0=End of Program Index, other fields
-					//   are invalid.
-		u32 pts;		// The PTS of the frame
-		u32 mask2;		// Bit 0 is bit 32 of the pts.
-	};
-	u32 table_ptr;
-	struct info index[400];
-
-The table_ptr is the encoder memory address in the table were
-*new* entries will be written.
-
-.. note:: This is a ringbuffer, so the table_ptr will wraparound.
-
-Param[0]
-^^^^^^^^
-
-Picture Mask:
-- 0=No index capture
-- 1=I frames
-- 3=I,P frames
-- 7=I,P,B frames
-
-(Seems to be ignored, it always indexes I, P and B frames)
-
-Param[1]
-^^^^^^^^
-
-Elements requested (up to 400)
-
-Result[0]
-^^^^^^^^^
-
-Offset in the encoder memory of the start of the table.
-
-Result[1]
-^^^^^^^^^
-
-Number of allocated elements up to a maximum of Param[1]
-
-
-
-CX2341X_ENC_SET_VBI_CONFIG
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 200/0xC8
-
-Description
-^^^^^^^^^^^
-
-Configure VBI settings
-
-Param[0]
-^^^^^^^^
-
-Bitmap:
-
-.. code-block:: none
-
-	    0    Mode '0' Sliced, '1' Raw
-	    1:3  Insertion:
-		     '000' insert in extension & user data
-		     '001' insert in private packets
-		     '010' separate stream and user data
-		     '111' separate stream and private data
-	    8:15 Stream ID (normally 0xBD)
-
-Param[1]
-^^^^^^^^
-
-Frames per interrupt (max 8). Only valid in raw mode.
-
-Param[2]
-^^^^^^^^
-
-Total raw VBI frames. Only valid in raw mode.
-
-Param[3]
-^^^^^^^^
-
-Start codes
-
-Param[4]
-^^^^^^^^
-
-Stop codes
-
-Param[5]
-^^^^^^^^
-
-Lines per frame
-
-Param[6]
-^^^^^^^^
-
-Byte per line
-
-Result[0]
-^^^^^^^^^
-
-Observed frames per interrupt in raw mode only. Rage 1 to Param[1]
-
-Result[1]
-^^^^^^^^^
-
-Observed number of frames in raw mode. Range 1 to Param[2]
-
-Result[2]
-^^^^^^^^^
-
-Memory offset to start or raw VBI data
-
-
-
-CX2341X_ENC_SET_DMA_BLOCK_SIZE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 201/0xC9
-
-Description
-^^^^^^^^^^^
-
-Set DMA transfer block size
-
-Param[0]
-^^^^^^^^
-
-DMA transfer block size in bytes or frames. When unit is bytes,
-supported block sizes are 2^7, 2^8 and 2^9 bytes.
-
-Param[1]
-^^^^^^^^
-
-Unit: 0=bytes, 1=frames
-
-
-
-CX2341X_ENC_GET_PREV_DMA_INFO_MB_10
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 202/0xCA
-
-Description
-^^^^^^^^^^^
-
-Returns information on the previous DMA transfer in conjunction with
-bit 27 of the interrupt mask. Uses mailbox 10.
-
-Result[0]
-^^^^^^^^^
-
-Type of stream
-
-Result[1]
-^^^^^^^^^
-
-Address Offset
-
-Result[2]
-^^^^^^^^^
-
-Maximum size of transfer
-
-
-
-CX2341X_ENC_GET_PREV_DMA_INFO_MB_9
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 203/0xCB
-
-Description
-^^^^^^^^^^^
-
-Returns information on the previous DMA transfer in conjunction with
-bit 27 or 18 of the interrupt mask. Uses mailbox 9.
-
-Result[0]
-^^^^^^^^^
-
-Status bits:
-- 0   read completed
-- 1   write completed
-- 2   DMA read error
-- 3   DMA write error
-- 4   Scatter-Gather array error
-
-Result[1]
-^^^^^^^^^
-
-DMA type
-
-Result[2]
-^^^^^^^^^
-
-Presentation Time Stamp bits 0..31
-
-Result[3]
-^^^^^^^^^
-
-Presentation Time Stamp bit 32
-
-
-
-CX2341X_ENC_SCHED_DMA_TO_HOST
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 204/0xCC
-
-Description
-^^^^^^^^^^^
-
-Setup DMA to host operation
-
-Param[0]
-^^^^^^^^
-
-Memory address of link list
-
-Param[1]
-^^^^^^^^
-
-Length of link list (wtf: what units ???)
-
-Param[2]
-^^^^^^^^
-
-DMA type (0=MPEG)
-
-
-
-CX2341X_ENC_INITIALIZE_INPUT
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 205/0xCD
-
-Description
-^^^^^^^^^^^
-
-Initializes the video input
-
-
-
-CX2341X_ENC_SET_FRAME_DROP_RATE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 208/0xD0
-
-Description
-^^^^^^^^^^^
-
-For each frame captured, skip specified number of frames.
-
-Param[0]
-^^^^^^^^
-
-Number of frames to skip
-
-
-
-CX2341X_ENC_PAUSE_ENCODER
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 210/0xD2
-
-Description
-^^^^^^^^^^^
-
-During a pause condition, all frames are dropped instead of being encoded.
-
-Param[0]
-^^^^^^^^
-
-- 0=Pause encoding
-- 1=Continue encoding
-
-
-
-CX2341X_ENC_REFRESH_INPUT
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 211/0xD3
-
-Description
-^^^^^^^^^^^
-
-Refreshes the video input
-
-
-
-CX2341X_ENC_SET_COPYRIGHT
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 212/0xD4
-
-Description
-^^^^^^^^^^^
-
-Sets stream copyright property
-
-Param[0]
-^^^^^^^^
-
-
-- 0=Stream is not copyrighted
-- 1=Stream is copyrighted
-
-
-
-CX2341X_ENC_SET_EVENT_NOTIFICATION
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 213/0xD5
-
-Description
-^^^^^^^^^^^
-
-Setup firmware to notify the host about a particular event. Host must
-unmask the interrupt bit.
-
-Param[0]
-^^^^^^^^
-
-Event (0=refresh encoder input)
-
-Param[1]
-^^^^^^^^
-
-Notification 0=disabled 1=enabled
-
-Param[2]
-^^^^^^^^
-
-Interrupt bit
-
-Param[3]
-^^^^^^^^
-
-Mailbox slot, -1 if no mailbox required.
-
-
-
-CX2341X_ENC_SET_NUM_VSYNC_LINES
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 214/0xD6
-
-Description
-^^^^^^^^^^^
-
-Depending on the analog video decoder used, this assigns the number
-of lines for field 1 and 2.
-
-Param[0]
-^^^^^^^^
-
-Field 1 number of lines:
-- 0x00EF for SAA7114
-- 0x00F0 for SAA7115
-- 0x0105 for Micronas
-
-Param[1]
-^^^^^^^^
-
-Field 2 number of lines:
-- 0x00EF for SAA7114
-- 0x00F0 for SAA7115
-- 0x0106 for Micronas
-
-
-
-CX2341X_ENC_SET_PLACEHOLDER
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 215/0xD7
-
-Description
-^^^^^^^^^^^
-
-Provides a mechanism of inserting custom user data in the MPEG stream.
-
-Param[0]
-^^^^^^^^
-
-- 0=extension & user data
-- 1=private packet with stream ID 0xBD
-
-Param[1]
-^^^^^^^^
-
-Rate at which to insert data, in units of frames (for private packet)
-or GOPs (for ext. & user data)
-
-Param[2]
-^^^^^^^^
-
-Number of data DWORDs (below) to insert
-
-Param[3]
-^^^^^^^^
-
-Custom data 0
-
-Param[4]
-^^^^^^^^
-
-Custom data 1
-
-Param[5]
-^^^^^^^^
-
-Custom data 2
-
-Param[6]
-^^^^^^^^
-
-Custom data 3
-
-Param[7]
-^^^^^^^^
-
-Custom data 4
-
-Param[8]
-^^^^^^^^
-
-Custom data 5
-
-Param[9]
-^^^^^^^^
-
-Custom data 6
-
-Param[10]
-^^^^^^^^^
-
-Custom data 7
-
-Param[11]
-^^^^^^^^^
-
-Custom data 8
-
-
-
-CX2341X_ENC_MUTE_VIDEO
-~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 217/0xD9
-
-Description
-^^^^^^^^^^^
-
-Video muting
-
-Param[0]
-^^^^^^^^
-
-Bit usage:
-
-.. code-block:: none
-
-	 0    	'0'=video not muted
-		'1'=video muted, creates frames with the YUV color defined below
-	 1:7  	Unused
-	 8:15 	V chrominance information
-	16:23 	U chrominance information
-	24:31 	Y luminance information
-
-
-
-CX2341X_ENC_MUTE_AUDIO
-~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 218/0xDA
-
-Description
-^^^^^^^^^^^
-
-Audio muting
-
-Param[0]
-^^^^^^^^
-
-- 0=audio not muted
-- 1=audio muted (produces silent mpeg audio stream)
-
-
-
-CX2341X_ENC_SET_VERT_CROP_LINE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 219/0xDB
-
-Description
-^^^^^^^^^^^
-
-Something to do with 'Vertical Crop Line'
-
-Param[0]
-^^^^^^^^
-
-If saa7114 and raw VBI capture and 60 Hz, then set to 10001.
-Else 0.
-
-
-
-CX2341X_ENC_MISC
-~~~~~~~~~~~~~~~~
-
-Enum: 220/0xDC
-
-Description
-^^^^^^^^^^^
-
-Miscellaneous actions. Not known for 100% what it does. It's really a
-sort of ioctl call. The first parameter is a command number, the second
-the value.
-
-Param[0]
-^^^^^^^^
-
-Command number:
-
-.. code-block:: none
-
-	 1=set initial SCR value when starting encoding (works).
-	 2=set quality mode (apparently some test setting).
-	 3=setup advanced VIM protection handling.
-	   Always 1 for the cx23416 and 0 for cx23415.
-	 4=generate DVD compatible PTS timestamps
-	 5=USB flush mode
-	 6=something to do with the quantization matrix
-	 7=set navigation pack insertion for DVD: adds 0xbf (private stream 2)
-	   packets to the MPEG. The size of these packets is 2048 bytes (including
-	   the header of 6 bytes: 0x000001bf + length). The payload is zeroed and
-	   it is up to the application to fill them in. These packets are apparently
-	   inserted every four frames.
-	 8=enable scene change detection (seems to be a failure)
-	 9=set history parameters of the video input module
-	10=set input field order of VIM
-	11=set quantization matrix
-	12=reset audio interface after channel change or input switch (has no argument).
-	   Needed for the cx2584x, not needed for the mspx4xx, but it doesn't seem to
-	   do any harm calling it regardless.
-	13=set audio volume delay
-	14=set audio delay
-
-
-Param[1]
-^^^^^^^^
-
-Command value.
-
-Decoder firmware API description
---------------------------------
-
-.. note:: this API is part of the decoder firmware, so it's cx23415 only.
-
-
-
-CX2341X_DEC_PING_FW
-~~~~~~~~~~~~~~~~~~~
-
-Enum: 0/0x00
-
-Description
-^^^^^^^^^^^
-
-This API call does nothing. It may be used to check if the firmware
-is responding.
-
-
-
-CX2341X_DEC_START_PLAYBACK
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 1/0x01
-
-Description
-^^^^^^^^^^^
-
-Begin or resume playback.
-
-Param[0]
-^^^^^^^^
-
-0 based frame number in GOP to begin playback from.
-
-Param[1]
-^^^^^^^^
-
-Specifies the number of muted audio frames to play before normal
-audio resumes. (This is not implemented in the firmware, leave at 0)
-
-
-
-CX2341X_DEC_STOP_PLAYBACK
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 2/0x02
-
-Description
-^^^^^^^^^^^
-
-Ends playback and clears all decoder buffers. If PTS is not zero,
-playback stops at specified PTS.
-
-Param[0]
-^^^^^^^^
-
-Display 0=last frame, 1=black
-
-.. note::
-
-	this takes effect immediately, so if you want to wait for a PTS,
-	then use '0', otherwise the screen goes to black at once.
-	You can call this later (even if there is no playback) with a 1 value
-	to set the screen to black.
-
-Param[1]
-^^^^^^^^
-
-PTS low
-
-Param[2]
-^^^^^^^^
-
-PTS high
-
-
-
-CX2341X_DEC_SET_PLAYBACK_SPEED
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 3/0x03
-
-Description
-^^^^^^^^^^^
-
-Playback stream at speed other than normal. There are two modes of
-operation:
-
-	- Smooth: host transfers entire stream and firmware drops unused
-	  frames.
-	- Coarse: host drops frames based on indexing as required to achieve
-	  desired speed.
-
-Param[0]
-^^^^^^^^
-
-.. code-block:: none
-
-	Bitmap:
-	    0:7  0 normal
-		 1 fast only "1.5 times"
-		 n nX fast, 1/nX slow
-	    30   Framedrop:
-		     '0' during 1.5 times play, every other B frame is dropped
-		     '1' during 1.5 times play, stream is unchanged (bitrate
-			 must not exceed 8mbps)
-	    31   Speed:
-		     '0' slow
-		     '1' fast
-
-.. note::
-
-	n is limited to 2. Anything higher does not result in
-	faster playback. Instead the host should start dropping frames.
-
-Param[1]
-^^^^^^^^
-
-Direction: 0=forward, 1=reverse
-
-.. note::
-
-	to make reverse playback work you have to write full GOPs in
-	reverse order.
-
-Param[2]
-^^^^^^^^
-
-.. code-block:: none
-
-	Picture mask:
-	    1=I frames
-	    3=I, P frames
-	    7=I, P, B frames
-
-Param[3]
-^^^^^^^^
-
-B frames per GOP (for reverse play only)
-
-.. note::
-
-	for reverse playback the Picture Mask should be set to I or I, P.
-	Adding B frames to the mask will result in corrupt video. This field
-	has to be set to the correct value in order to keep the timing correct.
-
-Param[4]
-^^^^^^^^
-
-Mute audio: 0=disable, 1=enable
-
-Param[5]
-^^^^^^^^
-
-Display 0=frame, 1=field
-
-Param[6]
-^^^^^^^^
-
-Specifies the number of muted audio frames to play before normal audio
-resumes. (Not implemented in the firmware, leave at 0)
-
-
-
-CX2341X_DEC_STEP_VIDEO
-~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 5/0x05
-
-Description
-^^^^^^^^^^^
-
-Each call to this API steps the playback to the next unit defined below
-in the current playback direction.
-
-Param[0]
-^^^^^^^^
-
-0=frame, 1=top field, 2=bottom field
-
-
-
-CX2341X_DEC_SET_DMA_BLOCK_SIZE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 8/0x08
-
-Description
-^^^^^^^^^^^
-
-Set DMA transfer block size. Counterpart to API 0xC9
-
-Param[0]
-^^^^^^^^
-
-DMA transfer block size in bytes. A different size may be specified
-when issuing the DMA transfer command.
-
-
-
-CX2341X_DEC_GET_XFER_INFO
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 9/0x09
-
-Description
-^^^^^^^^^^^
-
-This API call may be used to detect an end of stream condition.
-
-Result[0]
-^^^^^^^^^
-
-Stream type
-
-Result[1]
-^^^^^^^^^
-
-Address offset
-
-Result[2]
-^^^^^^^^^
-
-Maximum bytes to transfer
-
-Result[3]
-^^^^^^^^^
-
-Buffer fullness
-
-
-
-CX2341X_DEC_GET_DMA_STATUS
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 10/0x0A
-
-Description
-^^^^^^^^^^^
-
-Status of the last DMA transfer
-
-Result[0]
-^^^^^^^^^
-
-Bit 1 set means transfer complete
-Bit 2 set means DMA error
-Bit 3 set means linked list error
-
-Result[1]
-^^^^^^^^^
-
-DMA type: 0=MPEG, 1=OSD, 2=YUV
-
-
-
-CX2341X_DEC_SCHED_DMA_FROM_HOST
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 11/0x0B
-
-Description
-^^^^^^^^^^^
-
-Setup DMA from host operation. Counterpart to API 0xCC
-
-Param[0]
-^^^^^^^^
-
-Memory address of link list
-
-Param[1]
-^^^^^^^^
-
-Total # of bytes to transfer
-
-Param[2]
-^^^^^^^^
-
-DMA type (0=MPEG, 1=OSD, 2=YUV)
-
-
-
-CX2341X_DEC_PAUSE_PLAYBACK
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 13/0x0D
-
-Description
-^^^^^^^^^^^
-
-Freeze playback immediately. In this mode, when internal buffers are
-full, no more data will be accepted and data request IRQs will be
-masked.
-
-Param[0]
-^^^^^^^^
-
-Display: 0=last frame, 1=black
-
-
-
-CX2341X_DEC_HALT_FW
-~~~~~~~~~~~~~~~~~~~
-
-Enum: 14/0x0E
-
-Description
-^^^^^^^^^^^
-
-The firmware is halted and no further API calls are serviced until
-the firmware is uploaded again.
-
-
-
-CX2341X_DEC_SET_STANDARD
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 16/0x10
-
-Description
-^^^^^^^^^^^
-
-Selects display standard
-
-Param[0]
-^^^^^^^^
-
-0=NTSC, 1=PAL
-
-
-
-CX2341X_DEC_GET_VERSION
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 17/0x11
-
-Description
-^^^^^^^^^^^
-
-Returns decoder firmware version information
-
-Result[0]
-^^^^^^^^^
-
-Version bitmask:
-	- Bits  0:15 build
-	- Bits 16:23 minor
-	- Bits 24:31 major
-
-
-
-CX2341X_DEC_SET_STREAM_INPUT
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 20/0x14
-
-Description
-^^^^^^^^^^^
-
-Select decoder stream input port
-
-Param[0]
-^^^^^^^^
-
-0=memory (default), 1=streaming
-
-
-
-CX2341X_DEC_GET_TIMING_INFO
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 21/0x15
-
-Description
-^^^^^^^^^^^
-
-Returns timing information from start of playback
-
-Result[0]
-^^^^^^^^^
-
-Frame count by decode order
-
-Result[1]
-^^^^^^^^^
-
-Video PTS bits 0:31 by display order
-
-Result[2]
-^^^^^^^^^
-
-Video PTS bit 32 by display order
-
-Result[3]
-^^^^^^^^^
-
-SCR bits 0:31 by display order
-
-Result[4]
-^^^^^^^^^
-
-SCR bit 32 by display order
-
-
-
-CX2341X_DEC_SET_AUDIO_MODE
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 22/0x16
-
-Description
-^^^^^^^^^^^
-
-Select audio mode
-
-Param[0]
-^^^^^^^^
-
-Dual mono mode action
-	0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
-
-Param[1]
-^^^^^^^^
-
-Stereo mode action:
-	0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
-
-
-
-CX2341X_DEC_SET_EVENT_NOTIFICATION
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 23/0x17
-
-Description
-^^^^^^^^^^^
-
-Setup firmware to notify the host about a particular event.
-Counterpart to API 0xD5
-
-Param[0]
-^^^^^^^^
-
-Event:
-	- 0=Audio mode change between mono, (joint) stereo and dual channel.
-	- 3=Decoder started
-	- 4=Unknown: goes off 10-15 times per second while decoding.
-	- 5=Some sync event: goes off once per frame.
-
-Param[1]
-^^^^^^^^
-
-Notification 0=disabled, 1=enabled
-
-Param[2]
-^^^^^^^^
-
-Interrupt bit
-
-Param[3]
-^^^^^^^^
-
-Mailbox slot, -1 if no mailbox required.
-
-
-
-CX2341X_DEC_SET_DISPLAY_BUFFERS
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 24/0x18
-
-Description
-^^^^^^^^^^^
-
-Number of display buffers. To decode all frames in reverse playback you
-must use nine buffers.
-
-Param[0]
-^^^^^^^^
-
-0=six buffers, 1=nine buffers
-
-
-
-CX2341X_DEC_EXTRACT_VBI
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 25/0x19
-
-Description
-^^^^^^^^^^^
-
-Extracts VBI data
-
-Param[0]
-^^^^^^^^
-
-0=extract from extension & user data, 1=extract from private packets
-
-Result[0]
-^^^^^^^^^
-
-VBI table location
-
-Result[1]
-^^^^^^^^^
-
-VBI table size
-
-
-
-CX2341X_DEC_SET_DECODER_SOURCE
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 26/0x1A
-
-Description
-^^^^^^^^^^^
-
-Selects decoder source. Ensure that the parameters passed to this
-API match the encoder settings.
-
-Param[0]
-^^^^^^^^
-
-Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host
-
-Param[1]
-^^^^^^^^
-
-YUV picture width
-
-Param[2]
-^^^^^^^^
-
-YUV picture height
-
-Param[3]
-^^^^^^^^
-
-Bitmap: see Param[0] of API 0xBD
-
-
-
-CX2341X_DEC_SET_PREBUFFERING
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Enum: 30/0x1E
-
-Description
-^^^^^^^^^^^
-
-Decoder prebuffering, when enabled up to 128KB are buffered for
-streams <8mpbs or 640KB for streams >8mbps
-
-Param[0]
-^^^^^^^^
-
-0=off, 1=on
-
-PVR350 Video decoder registers 0x02002800 -> 0x02002B00
--------------------------------------------------------
-
-Author: Ian Armstrong <ian@iarmst.demon.co.uk>
-
-Version: v0.4
-
-Date: 12 March 2007
-
-
-This list has been worked out through trial and error. There will be mistakes
-and omissions. Some registers have no obvious effect so it's hard to say what
-they do, while others interact with each other, or require a certain load
-sequence. Horizontal filter setup is one example, with six registers working
-in unison and requiring a certain load sequence to correctly configure. The
-indexed colour palette is much easier to set at just two registers, but again
-it requires a certain load sequence.
-
-Some registers are fussy about what they are set to. Load in a bad value & the
-decoder will fail. A firmware reload will often recover, but sometimes a reset
-is required. For registers containing size information, setting them to 0 is
-generally a bad idea. For other control registers i.e. 2878, you'll only find
-out what values are bad when it hangs.
-
-.. code-block:: none
-
-	--------------------------------------------------------------------------------
-	2800
-	bit 0
-		Decoder enable
-		0 = disable
-		1 = enable
-	--------------------------------------------------------------------------------
-	2804
-	bits 0:31
-		Decoder horizontal Y alias register 1
-	---------------
-	2808
-	bits 0:31
-		Decoder horizontal Y alias register 2
-	---------------
-	280C
-	bits 0:31
-		Decoder horizontal Y alias register 3
-	---------------
-	2810
-	bits 0:31
-		Decoder horizontal Y alias register 4
-	---------------
-	2814
-	bits 0:31
-		Decoder horizontal Y alias register 5
-	---------------
-	2818
-	bits 0:31
-		Decoder horizontal Y alias trigger
-
-	These six registers control the horizontal aliasing filter for the Y plane.
-	The first five registers must all be loaded before accessing the trigger
-	(2818), as this register actually clocks the data through for the first
-	five.
-
-	To correctly program set the filter, this whole procedure must be done 16
-	times. The actual register contents are copied from a lookup-table in the
-	firmware which contains 4 different filter settings.
-
-	--------------------------------------------------------------------------------
-	281C
-	bits 0:31
-		Decoder horizontal UV alias register 1
-	---------------
-	2820
-	bits 0:31
-		Decoder horizontal UV alias register 2
-	---------------
-	2824
-	bits 0:31
-		Decoder horizontal UV alias register 3
-	---------------
-	2828
-	bits 0:31
-		Decoder horizontal UV alias register 4
-	---------------
-	282C
-	bits 0:31
-		Decoder horizontal UV alias register 5
-	---------------
-	2830
-	bits 0:31
-		Decoder horizontal UV alias trigger
-
-	These six registers control the horizontal aliasing for the UV plane.
-	Operation is the same as the Y filter, with 2830 being the trigger
-	register.
-
-	--------------------------------------------------------------------------------
-	2834
-	bits 0:15
-		Decoder Y source width in pixels
-
-	bits 16:31
-		Decoder Y destination width in pixels
-	---------------
-	2838
-	bits 0:15
-		Decoder UV source width in pixels
-
-	bits 16:31
-		Decoder UV destination width in pixels
-
-	NOTE: For both registers, the resulting image must be fully visible on
-	screen. If the image exceeds the right edge both the source and destination
-	size must be adjusted to reflect the visible portion. For the source width,
-	you must take into account the scaling when calculating the new value.
-	--------------------------------------------------------------------------------
-
-	283C
-	bits 0:31
-		Decoder Y horizontal scaling
-			Normally = Reg 2854 >> 2
-	---------------
-	2840
-	bits 0:31
-		Decoder ?? unknown - horizontal scaling
-		Usually 0x00080514
-	---------------
-	2844
-	bits 0:31
-		Decoder UV horizontal scaling
-		Normally = Reg 2854 >> 2
-	---------------
-	2848
-	bits 0:31
-		Decoder ?? unknown - horizontal scaling
-		Usually 0x00100514
-	---------------
-	284C
-	bits 0:31
-		Decoder ?? unknown - Y plane
-		Usually 0x00200020
-	---------------
-	2850
-	bits 0:31
-		Decoder ?? unknown - UV plane
-		Usually 0x00200020
-	---------------
-	2854
-	bits 0:31
-		Decoder 'master' value for horizontal scaling
-	---------------
-	2858
-	bits 0:31
-		Decoder ?? unknown
-		Usually 0
-	---------------
-	285C
-	bits 0:31
-		Decoder ?? unknown
-		Normally = Reg 2854 >> 1
-	---------------
-	2860
-	bits 0:31
-		Decoder ?? unknown
-		Usually 0
-	---------------
-	2864
-	bits 0:31
-		Decoder ?? unknown
-		Normally = Reg 2854 >> 1
-	---------------
-	2868
-	bits 0:31
-		Decoder ?? unknown
-		Usually 0
-
-	Most of these registers either control horizontal scaling, or appear linked
-	to it in some way. Register 2854 contains the 'master' value & the other
-	registers can be calculated from that one. You must also remember to
-	correctly set the divider in Reg 2874.
-
-	To enlarge:
-		Reg 2854 = (source_width * 0x00200000) / destination_width
-		Reg 2874 = No divide
-
-	To reduce from full size down to half size:
-		Reg 2854 = (source_width/2 * 0x00200000) / destination width
-		Reg 2874 = Divide by 2
-
-	To reduce from half size down to quarter size:
-		Reg 2854 = (source_width/4 * 0x00200000) / destination width
-		Reg 2874 = Divide by 4
-
-	The result is always rounded up.
-
-	--------------------------------------------------------------------------------
-	286C
-	bits 0:15
-		Decoder horizontal Y buffer offset
-
-	bits 15:31
-		Decoder horizontal UV buffer offset
-
-	Offset into the video image buffer. If the offset is gradually incremented,
-	the on screen image will move left & wrap around higher up on the right.
-
-	--------------------------------------------------------------------------------
-	2870
-	bits 0:15
-		Decoder horizontal Y output offset
-
-	bits 16:31
-		Decoder horizontal UV output offset
-
-	Offsets the actual video output. Controls output alignment of the Y & UV
-	planes. The higher the value, the greater the shift to the left. Use
-	reg 2890 to move the image right.
-
-	--------------------------------------------------------------------------------
-	2874
-	bits 0:1
-		Decoder horizontal Y output size divider
-		00 = No divide
-		01 = Divide by 2
-		10 = Divide by 3
-
-	bits 4:5
-		Decoder horizontal UV output size divider
-		00 = No divide
-		01 = Divide by 2
-		10 = Divide by 3
-
-	bit 8
-		Decoder ?? unknown
-		0 = Normal
-		1 = Affects video output levels
-
-	bit 16
-		Decoder ?? unknown
-		0 = Normal
-		1 = Disable horizontal filter
-
-	--------------------------------------------------------------------------------
-	2878
-	bit 0
-		?? unknown
-
-	bit 1
-		osd on/off
-		0 = osd off
-		1 = osd on
-
-	bit 2
-		Decoder + osd video timing
-		0 = NTSC
-		1 = PAL
-
-	bits 3:4
-		?? unknown
-
-	bit 5
-		Decoder + osd
-		Swaps upper & lower fields
-
-	--------------------------------------------------------------------------------
-	287C
-	bits 0:10
-		Decoder & osd ?? unknown
-		Moves entire screen horizontally. Starts at 0x005 with the screen
-		shifted heavily to the right. Incrementing in steps of 0x004 will
-		gradually shift the screen to the left.
-
-	bits 11:31
-		?? unknown
-
-	Normally contents are 0x00101111 (NTSC) or 0x1010111d (PAL)
-
-	--------------------------------------------------------------------------------
-	2880  --------    ?? unknown
-	2884  --------    ?? unknown
-	--------------------------------------------------------------------------------
-	2888
-	bit 0
-		Decoder + osd ?? unknown
-		0 = Normal
-		1 = Misaligned fields (Correctable through 289C & 28A4)
-
-	bit 4
-		?? unknown
-
-	bit 8
-		?? unknown
-
-	Warning: Bad values will require a firmware reload to recover.
-			Known to be bad are 0x000,0x011,0x100,0x111
-	--------------------------------------------------------------------------------
-	288C
-	bits 0:15
-		osd ?? unknown
-		Appears to affect the osd position stability. The higher the value the
-		more unstable it becomes. Decoder output remains stable.
-
-	bits 16:31
-		osd ?? unknown
-		Same as bits 0:15
-
-	--------------------------------------------------------------------------------
-	2890
-	bits 0:11
-		Decoder output horizontal offset.
-
-	Horizontal offset moves the video image right. A small left shift is
-	possible, but it's better to use reg 2870 for that due to its greater
-	range.
-
-	NOTE: Video corruption will occur if video window is shifted off the right
-	edge. To avoid this read the notes for 2834 & 2838.
-	--------------------------------------------------------------------------------
-	2894
-	bits 0:23
-		Decoder output video surround colour.
-
-	Contains the colour (in yuv) used to fill the screen when the video is
-	running in a window.
-	--------------------------------------------------------------------------------
-	2898
-	bits 0:23
-		Decoder video window colour
-		Contains the colour (in yuv) used to fill the video window when the
-		video is turned off.
-
-	bit 24
-		Decoder video output
-		0 = Video on
-		1 = Video off
-
-	bit 28
-		Decoder plane order
-		0 = Y,UV
-		1 = UV,Y
-
-	bit 29
-		Decoder second plane byte order
-		0 = Normal (UV)
-		1 = Swapped (VU)
-
-	In normal usage, the first plane is Y & the second plane is UV. Though the
-	order of the planes can be swapped, only the byte order of the second plane
-	can be swapped. This isn't much use for the Y plane, but can be useful for
-	the UV plane.
-
-	--------------------------------------------------------------------------------
-	289C
-	bits 0:15
-		Decoder vertical field offset 1
-
-	bits 16:31
-		Decoder vertical field offset 2
-
-	Controls field output vertical alignment. The higher the number, the lower
-	the image on screen. Known starting values are 0x011E0017 (NTSC) &
-	0x01500017 (PAL)
-	--------------------------------------------------------------------------------
-	28A0
-	bits 0:15
-		Decoder & osd width in pixels
-
-	bits 16:31
-		Decoder & osd height in pixels
-
-	All output from the decoder & osd are disabled beyond this area. Decoder
-	output will simply go black outside of this region. If the osd tries to
-	exceed this area it will become corrupt.
-	--------------------------------------------------------------------------------
-	28A4
-	bits 0:11
-		osd left shift.
-
-	Has a range of 0x770->0x7FF. With the exception of 0, any value outside of
-	this range corrupts the osd.
-	--------------------------------------------------------------------------------
-	28A8
-	bits 0:15
-		osd vertical field offset 1
-
-	bits 16:31
-		osd vertical field offset 2
-
-	Controls field output vertical alignment. The higher the number, the lower
-	the image on screen. Known starting values are 0x011E0017 (NTSC) &
-	0x01500017 (PAL)
-	--------------------------------------------------------------------------------
-	28AC  --------    ?? unknown
-	|
-	V
-	28BC  --------    ?? unknown
-	--------------------------------------------------------------------------------
-	28C0
-	bit 0
-		Current output field
-		0 = first field
-		1 = second field
-
-	bits 16:31
-		Current scanline
-		The scanline counts from the top line of the first field
-		through to the last line of the second field.
-	--------------------------------------------------------------------------------
-	28C4  --------    ?? unknown
-	|
-	V
-	28F8  --------    ?? unknown
-	--------------------------------------------------------------------------------
-	28FC
-	bit 0
-		?? unknown
-		0 = Normal
-		1 = Breaks decoder & osd output
-	--------------------------------------------------------------------------------
-	2900
-	bits 0:31
-		Decoder vertical Y alias register 1
-	---------------
-	2904
-	bits 0:31
-		Decoder vertical Y alias register 2
-	---------------
-	2908
-	bits 0:31
-		Decoder vertical Y alias trigger
-
-	These three registers control the vertical aliasing filter for the Y plane.
-	Operation is similar to the horizontal Y filter (2804). The only real
-	difference is that there are only two registers to set before accessing
-	the trigger register (2908). As for the horizontal filter, the values are
-	taken from a lookup table in the firmware, and the procedure must be
-	repeated 16 times to fully program the filter.
-	--------------------------------------------------------------------------------
-	290C
-	bits 0:31
-		Decoder vertical UV alias register 1
-	---------------
-	2910
-	bits 0:31
-		Decoder vertical UV alias register 2
-	---------------
-	2914
-	bits 0:31
-		Decoder vertical UV alias trigger
-
-	These three registers control the vertical aliasing filter for the UV
-	plane. Operation is the same as the Y filter, with 2914 being the trigger.
-	--------------------------------------------------------------------------------
-	2918
-	bits 0:15
-		Decoder Y source height in pixels
-
-	bits 16:31
-		Decoder Y destination height in pixels
-	---------------
-	291C
-	bits 0:15
-		Decoder UV source height in pixels divided by 2
-
-	bits 16:31
-		Decoder UV destination height in pixels
-
-	NOTE: For both registers, the resulting image must be fully visible on
-	screen. If the image exceeds the bottom edge both the source and
-	destination size must be adjusted to reflect the visible portion. For the
-	source height, you must take into account the scaling when calculating the
-	new value.
-	--------------------------------------------------------------------------------
-	2920
-	bits 0:31
-		Decoder Y vertical scaling
-		Normally = Reg 2930 >> 2
-	---------------
-	2924
-	bits 0:31
-		Decoder Y vertical scaling
-		Normally = Reg 2920 + 0x514
-	---------------
-	2928
-	bits 0:31
-		Decoder UV vertical scaling
-		When enlarging = Reg 2930 >> 2
-		When reducing = Reg 2930 >> 3
-	---------------
-	292C
-	bits 0:31
-		Decoder UV vertical scaling
-		Normally = Reg 2928 + 0x514
-	---------------
-	2930
-	bits 0:31
-		Decoder 'master' value for vertical scaling
-	---------------
-	2934
-	bits 0:31
-		Decoder ?? unknown - Y vertical scaling
-	---------------
-	2938
-	bits 0:31
-		Decoder Y vertical scaling
-		Normally = Reg 2930
-	---------------
-	293C
-	bits 0:31
-		Decoder ?? unknown - Y vertical scaling
-	---------------
-	2940
-	bits 0:31
-		Decoder UV vertical scaling
-		When enlarging = Reg 2930 >> 1
-		When reducing = Reg 2930
-	---------------
-	2944
-	bits 0:31
-		Decoder ?? unknown - UV vertical scaling
-	---------------
-	2948
-	bits 0:31
-		Decoder UV vertical scaling
-		Normally = Reg 2940
-	---------------
-	294C
-	bits 0:31
-		Decoder ?? unknown - UV vertical scaling
-
-	Most of these registers either control vertical scaling, or appear linked
-	to it in some way. Register 2930 contains the 'master' value & all other
-	registers can be calculated from that one. You must also remember to
-	correctly set the divider in Reg 296C
-
-	To enlarge:
-		Reg 2930 = (source_height * 0x00200000) / destination_height
-		Reg 296C = No divide
-
-	To reduce from full size down to half size:
-		Reg 2930 = (source_height/2 * 0x00200000) / destination height
-		Reg 296C = Divide by 2
-
-	To reduce from half down to quarter.
-		Reg 2930 = (source_height/4 * 0x00200000) / destination height
-		Reg 296C = Divide by 4
-
-	--------------------------------------------------------------------------------
-	2950
-	bits 0:15
-		Decoder Y line index into display buffer, first field
-
-	bits 16:31
-		Decoder Y vertical line skip, first field
-	--------------------------------------------------------------------------------
-	2954
-	bits 0:15
-		Decoder Y line index into display buffer, second field
-
-	bits 16:31
-		Decoder Y vertical line skip, second field
-	--------------------------------------------------------------------------------
-	2958
-	bits 0:15
-		Decoder UV line index into display buffer, first field
-
-	bits 16:31
-		Decoder UV vertical line skip, first field
-	--------------------------------------------------------------------------------
-	295C
-	bits 0:15
-		Decoder UV line index into display buffer, second field
-
-	bits 16:31
-		Decoder UV vertical line skip, second field
-	--------------------------------------------------------------------------------
-	2960
-	bits 0:15
-		Decoder destination height minus 1
-
-	bits 16:31
-		Decoder destination height divided by 2
-	--------------------------------------------------------------------------------
-	2964
-	bits 0:15
-		Decoder Y vertical offset, second field
-
-	bits 16:31
-		Decoder Y vertical offset, first field
-
-	These two registers shift the Y plane up. The higher the number, the
-	greater the shift.
-	--------------------------------------------------------------------------------
-	2968
-	bits 0:15
-		Decoder UV vertical offset, second field
-
-	bits 16:31
-		Decoder UV vertical offset, first field
-
-	These two registers shift the UV plane up. The higher the number, the
-	greater the shift.
-	--------------------------------------------------------------------------------
-	296C
-	bits 0:1
-		Decoder vertical Y output size divider
-		00 = No divide
-		01 = Divide by 2
-		10 = Divide by 4
-
-	bits 8:9
-		Decoder vertical UV output size divider
-		00 = No divide
-		01 = Divide by 2
-		10 = Divide by 4
-	--------------------------------------------------------------------------------
-	2970
-	bit 0
-		Decoder ?? unknown
-		0 = Normal
-		1 = Affect video output levels
-
-	bit 16
-		Decoder ?? unknown
-		0 = Normal
-		1 = Disable vertical filter
-
-	--------------------------------------------------------------------------------
-	2974  --------   ?? unknown
-	|
-	V
-	29EF  --------   ?? unknown
-	--------------------------------------------------------------------------------
-	2A00
-	bits 0:2
-		osd colour mode
-		000 = 8 bit indexed
-		001 = 16 bit (565)
-		010 = 15 bit (555)
-		011 = 12 bit (444)
-		100 = 32 bit (8888)
-
-	bits 4:5
-		osd display bpp
-		01 = 8 bit
-		10 = 16 bit
-		11 = 32 bit
-
-	bit 8
-		osd global alpha
-		0 = Off
-		1 = On
-
-	bit 9
-		osd local alpha
-		0 = Off
-		1 = On
-
-	bit 10
-		osd colour key
-		0 = Off
-		1 = On
-
-	bit 11
-		osd ?? unknown
-		Must be 1
-
-	bit 13
-		osd colour space
-		0 = ARGB
-		1 = AYVU
-
-	bits 16:31
-		osd ?? unknown
-		Must be 0x001B (some kind of buffer pointer ?)
-
-	When the bits-per-pixel is set to 8, the colour mode is ignored and
-	assumed to be 8 bit indexed. For 16 & 32 bits-per-pixel the colour depth
-	is honoured, and when using a colour depth that requires fewer bytes than
-	allocated the extra bytes are used as padding. So for a 32 bpp with 8 bit
-	index colour, there are 3 padding bytes per pixel. It's also possible to
-	select 16bpp with a 32 bit colour mode. This results in the pixel width
-	being doubled, but the color key will not work as expected in this mode.
-
-	Colour key is as it suggests. You designate a colour which will become
-	completely transparent. When using 565, 555 or 444 colour modes, the
-	colour key is always 16 bits wide. The colour to key on is set in Reg 2A18.
-
-	Local alpha works differently depending on the colour mode. For 32bpp & 8
-	bit indexed, local alpha is a per-pixel 256 step transparency, with 0 being
-	transparent and 255 being solid. For the 16bpp modes 555 & 444, the unused
-	bit(s) act as a simple transparency switch, with 0 being solid & 1 being
-	fully transparent. There is no local alpha support for 16bit 565.
-
-	Global alpha is a 256 step transparency that applies to the entire osd,
-	with 0 being transparent & 255 being solid.
-
-	It's possible to combine colour key, local alpha & global alpha.
-	--------------------------------------------------------------------------------
-	2A04
-	bits 0:15
-		osd x coord for left edge
-
-	bits 16:31
-		osd y coord for top edge
-	---------------
-	2A08
-	bits 0:15
-		osd x coord for right edge
-
-	bits 16:31
-		osd y coord for bottom edge
-
-	For both registers, (0,0) = top left corner of the display area. These
-	registers do not control the osd size, only where it's positioned & how
-	much is visible. The visible osd area cannot exceed the right edge of the
-	display, otherwise the osd will become corrupt. See reg 2A10 for
-	setting osd width.
-	--------------------------------------------------------------------------------
-	2A0C
-	bits 0:31
-		osd buffer index
-
-	An index into the osd buffer. Slowly incrementing this moves the osd left,
-	wrapping around onto the right edge
-	--------------------------------------------------------------------------------
-	2A10
-	bits 0:11
-		osd buffer 32 bit word width
-
-	Contains the width of the osd measured in 32 bit words. This means that all
-	colour modes are restricted to a byte width which is divisible by 4.
-	--------------------------------------------------------------------------------
-	2A14
-	bits 0:15
-		osd height in pixels
-
-	bits 16:32
-		osd line index into buffer
-		osd will start displaying from this line.
-	--------------------------------------------------------------------------------
-	2A18
-	bits 0:31
-		osd colour key
-
-	Contains the colour value which will be transparent.
-	--------------------------------------------------------------------------------
-	2A1C
-	bits 0:7
-		osd global alpha
-
-	Contains the global alpha value (equiv ivtvfbctl --alpha XX)
-	--------------------------------------------------------------------------------
-	2A20  --------    ?? unknown
-	|
-	V
-	2A2C  --------    ?? unknown
-	--------------------------------------------------------------------------------
-	2A30
-	bits 0:7
-		osd colour to change in indexed palette
-	---------------
-	2A34
-	bits 0:31
-		osd colour for indexed palette
-
-	To set the new palette, first load the index of the colour to change into
-	2A30, then load the new colour into 2A34. The full palette is 256 colours,
-	so the index range is 0x00-0xFF
-	--------------------------------------------------------------------------------
-	2A38  --------    ?? unknown
-	2A3C  --------    ?? unknown
-	--------------------------------------------------------------------------------
-	2A40
-	bits 0:31
-		osd ?? unknown
-
-	Affects overall brightness, wrapping around to black
-	--------------------------------------------------------------------------------
-	2A44
-	bits 0:31
-		osd ?? unknown
-
-	Green tint
-	--------------------------------------------------------------------------------
-	2A48
-	bits 0:31
-		osd ?? unknown
-
-	Red tint
-	--------------------------------------------------------------------------------
-	2A4C
-	bits 0:31
-		osd ?? unknown
-
-	Affects overall brightness, wrapping around to black
-	--------------------------------------------------------------------------------
-	2A50
-	bits 0:31
-		osd ?? unknown
-
-	Colour shift
-	--------------------------------------------------------------------------------
-	2A54
-	bits 0:31
-		osd ?? unknown
-
-	Colour shift
-	--------------------------------------------------------------------------------
-	2A58  --------    ?? unknown
-	|
-	V
-	2AFC  --------    ?? unknown
-	--------------------------------------------------------------------------------
-	2B00
-	bit 0
-		osd filter control
-		0 = filter off
-		1 = filter on
-
-	bits 1:4
-		osd ?? unknown
-
-	--------------------------------------------------------------------------------
-
-The cx231xx DMA engine
-----------------------
-
-
-This page describes the structures and procedures used by the cx2341x DMA
-engine.
-
-Introduction
-~~~~~~~~~~~~
-
-The cx2341x PCI interface is busmaster capable. This means it has a DMA
-engine to efficiently transfer large volumes of data between the card and main
-memory without requiring help from a CPU. Like most hardware, it must operate
-on contiguous physical memory. This is difficult to come by in large quantities
-on virtual memory machines.
-
-Therefore, it also supports a technique called "scatter-gather". The card can
-transfer multiple buffers in one operation. Instead of allocating one large
-contiguous buffer, the driver can allocate several smaller buffers.
-
-In practice, I've seen the average transfer to be roughly 80K, but transfers
-above 128K were not uncommon, particularly at startup. The 128K figure is
-important, because that is the largest block that the kernel can normally
-allocate. Even still, 128K blocks are hard to come by, so the driver writer is
-urged to choose a smaller block size and learn the scatter-gather technique.
-
-Mailbox #10 is reserved for DMA transfer information.
-
-Note: the hardware expects little-endian data ('intel format').
-
-Flow
-~~~~
-
-This section describes, in general, the order of events when handling DMA
-transfers. Detailed information follows this section.
-
-- The card raises the Encoder interrupt.
-- The driver reads the transfer type, offset and size from Mailbox #10.
-- The driver constructs the scatter-gather array from enough free dma buffers
-  to cover the size.
-- The driver schedules the DMA transfer via the ScheduleDMAtoHost API call.
-- The card raises the DMA Complete interrupt.
-- The driver checks the DMA status register for any errors.
-- The driver post-processes the newly transferred buffers.
-
-NOTE! It is possible that the Encoder and DMA Complete interrupts get raised
-simultaneously. (End of the last, start of the next, etc.)
-
-Mailbox #10
-~~~~~~~~~~~
-
-The Flags, Command, Return Value and Timeout fields are ignored.
-
-- Name:       Mailbox #10
-- Results[0]: Type: 0: MPEG.
-- Results[1]: Offset: The position relative to the card's memory space.
-- Results[2]: Size: The exact number of bytes to transfer.
-
-My speculation is that since the StartCapture API has a capture type of "RAW"
-available, that the type field will have other values that correspond to YUV
-and PCM data.
-
-Scatter-Gather Array
-~~~~~~~~~~~~~~~~~~~~
-
-The scatter-gather array is a contiguously allocated block of memory that
-tells the card the source and destination of each data-block to transfer.
-Card "addresses" are derived from the offset supplied by Mailbox #10. Host
-addresses are the physical memory location of the target DMA buffer.
-
-Each S-G array element is a struct of three 32-bit words. The first word is
-the source address, the second is the destination address. Both take up the
-entire 32 bits. The lowest 18 bits of the third word is the transfer byte
-count. The high-bit of the third word is the "last" flag. The last-flag tells
-the card to raise the DMA_DONE interrupt. From hard personal experience, if
-you forget to set this bit, the card will still "work" but the stream will
-most likely get corrupted.
-
-The transfer count must be a multiple of 256. Therefore, the driver will need
-to track how much data in the target buffer is valid and deal with it
-accordingly.
-
-Array Element:
-
-- 32-bit Source Address
-- 32-bit Destination Address
-- 14-bit reserved (high bit is the last flag)
-- 18-bit byte count
-
-DMA Transfer Status
-~~~~~~~~~~~~~~~~~~~
-
-Register 0x0004 holds the DMA Transfer Status:
-
-- bit 0:   read completed
-- bit 1:   write completed
-- bit 2:   DMA read error
-- bit 3:   DMA write error
-- bit 4:   Scatter-Gather array error
-
-Non-compressed file format
---------------------------
-
-The cx23416 can produce (and the cx23415 can also read) raw YUV output. The
-format of a YUV frame is specific to this chip and is called HM12. 'HM' stands
-for 'Hauppauge Macroblock', which is a misnomer as 'Conexant Macroblock' would
-be more accurate.
-
-The format is YUV 4:2:0 which uses 1 Y byte per pixel and 1 U and V byte per
-four pixels.
-
-The data is encoded as two macroblock planes, the first containing the Y
-values, the second containing UV macroblocks.
-
-The Y plane is divided into blocks of 16x16 pixels from left to right
-and from top to bottom. Each block is transmitted in turn, line-by-line.
-
-So the first 16 bytes are the first line of the top-left block, the
-second 16 bytes are the second line of the top-left block, etc. After
-transmitting this block the first line of the block on the right to the
-first block is transmitted, etc.
-
-The UV plane is divided into blocks of 16x8 UV values going from left
-to right, top to bottom. Each block is transmitted in turn, line-by-line.
-
-So the first 16 bytes are the first line of the top-left block and
-contain 8 UV value pairs (16 bytes in total). The second 16 bytes are the
-second line of 8 UV pairs of the top-left block, etc. After transmitting
-this block the first line of the block on the right to the first block is
-transmitted, etc.
-
-The code below is given as an example on how to convert HM12 to separate
-Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels.
-
-The width of a frame is always 720 pixels, regardless of the actual specified
-width.
-
-If the height is not a multiple of 32 lines, then the captured video is
-missing macroblocks at the end and is unusable. So the height must be a
-multiple of 32.
-
-Raw format c example
-~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: c
-
-	#include <stdio.h>
-	#include <stdlib.h>
-	#include <string.h>
-
-	static unsigned char frame[576*720*3/2];
-	static unsigned char framey[576*720];
-	static unsigned char frameu[576*720 / 4];
-	static unsigned char framev[576*720 / 4];
-
-	static void de_macro_y(unsigned char* dst, unsigned char *src, int dstride, int w, int h)
-	{
-	unsigned int y, x, i;
-
-	// descramble Y plane
-	// dstride = 720 = w
-	// The Y plane is divided into blocks of 16x16 pixels
-	// Each block in transmitted in turn, line-by-line.
-	for (y = 0; y < h; y += 16) {
-		for (x = 0; x < w; x += 16) {
-		for (i = 0; i < 16; i++) {
-			memcpy(dst + x + (y + i) * dstride, src, 16);
-			src += 16;
-		}
-		}
-	}
-	}
-
-	static void de_macro_uv(unsigned char *dstu, unsigned char *dstv, unsigned char *src, int dstride, int w, int h)
-	{
-	unsigned int y, x, i;
-
-	// descramble U/V plane
-	// dstride = 720 / 2 = w
-	// The U/V values are interlaced (UVUV...).
-	// Again, the UV plane is divided into blocks of 16x16 UV values.
-	// Each block in transmitted in turn, line-by-line.
-	for (y = 0; y < h; y += 16) {
-		for (x = 0; x < w; x += 8) {
-		for (i = 0; i < 16; i++) {
-			int idx = x + (y + i) * dstride;
-
-			dstu[idx+0] = src[0];  dstv[idx+0] = src[1];
-			dstu[idx+1] = src[2];  dstv[idx+1] = src[3];
-			dstu[idx+2] = src[4];  dstv[idx+2] = src[5];
-			dstu[idx+3] = src[6];  dstv[idx+3] = src[7];
-			dstu[idx+4] = src[8];  dstv[idx+4] = src[9];
-			dstu[idx+5] = src[10]; dstv[idx+5] = src[11];
-			dstu[idx+6] = src[12]; dstv[idx+6] = src[13];
-			dstu[idx+7] = src[14]; dstv[idx+7] = src[15];
-			src += 16;
-		}
-		}
-	}
-	}
-
-	/*************************************************************************/
-	int main(int argc, char **argv)
-	{
-	FILE *fin;
-	int i;
-
-	if (argc == 1) fin = stdin;
-	else fin = fopen(argv[1], "r");
-
-	if (fin == NULL) {
-		fprintf(stderr, "cannot open input\n");
-		exit(-1);
-	}
-	while (fread(frame, sizeof(frame), 1, fin) == 1) {
-		de_macro_y(framey, frame, 720, 720, 576);
-		de_macro_uv(frameu, framev, frame + 720 * 576, 720 / 2, 720 / 2, 576 / 2);
-		fwrite(framey, sizeof(framey), 1, stdout);
-		fwrite(framev, sizeof(framev), 1, stdout);
-		fwrite(frameu, sizeof(frameu), 1, stdout);
-	}
-	fclose(fin);
-	return 0;
-	}
-
-
-Format of embedded V4L2_MPEG_STREAM_VBI_FMT_IVTV VBI data
----------------------------------------------------------
-
-Author: Hans Verkuil <hverkuil@xs4all.nl>
-
-
-This section describes the V4L2_MPEG_STREAM_VBI_FMT_IVTV format of the VBI data
-embedded in an MPEG-2 program stream. This format is in part dictated by some
-hardware limitations of the ivtv driver (the driver for the Conexant cx23415/6
-chips), in particular a maximum size for the VBI data. Anything longer is cut
-off when the MPEG stream is played back through the cx23415.
-
-The advantage of this format is it is very compact and that all VBI data for
-all lines can be stored while still fitting within the maximum allowed size.
-
-The stream ID of the VBI data is 0xBD. The maximum size of the embedded data is
-4 + 43 * 36, which is 4 bytes for a header and 2 * 18 VBI lines with a 1 byte
-header and a 42 bytes payload each. Anything beyond this limit is cut off by
-the cx23415/6 firmware. Besides the data for the VBI lines we also need 36 bits
-for a bitmask determining which lines are captured and 4 bytes for a magic cookie,
-signifying that this data package contains V4L2_MPEG_STREAM_VBI_FMT_IVTV VBI data.
-If all lines are used, then there is no longer room for the bitmask. To solve this
-two different magic numbers were introduced:
-
-'itv0': After this magic number two unsigned longs follow. Bits 0-17 of the first
-unsigned long denote which lines of the first field are captured. Bits 18-31 of
-the first unsigned long and bits 0-3 of the second unsigned long are used for the
-second field.
-
-'ITV0': This magic number assumes all VBI lines are captured, i.e. it implicitly
-implies that the bitmasks are 0xffffffff and 0xf.
-
-After these magic cookies (and the 8 byte bitmask in case of cookie 'itv0') the
-captured VBI lines start:
-
-For each line the least significant 4 bits of the first byte contain the data type.
-Possible values are shown in the table below. The payload is in the following 42
-bytes.
-
-Here is the list of possible data types:
-
-.. code-block:: c
-
-	#define IVTV_SLICED_TYPE_TELETEXT       0x1     // Teletext (uses lines 6-22 for PAL)
-	#define IVTV_SLICED_TYPE_CC             0x4     // Closed Captions (line 21 NTSC)
-	#define IVTV_SLICED_TYPE_WSS            0x5     // Wide Screen Signal (line 23 PAL)
-	#define IVTV_SLICED_TYPE_VPS            0x7     // Video Programming System (PAL) (line 16)
-
diff --git a/Documentation/media/v4l-drivers/cx23885-cardlist.rst b/Documentation/media/v4l-drivers/cx23885-cardlist.rst
deleted file mode 100644
index ddff8da98eeb..000000000000
--- a/Documentation/media/v4l-drivers/cx23885-cardlist.rst
+++ /dev/null
@@ -1,263 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-cx23885 cards list
-==================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - PCI IDs
-
-   * - 0
-     - UNKNOWN/GENERIC
-     - 0070:3400
-
-   * - 1
-     - Hauppauge WinTV-HVR1800lp
-     - 0070:7600
-
-   * - 2
-     - Hauppauge WinTV-HVR1800
-     - 0070:7800, 0070:7801, 0070:7809
-
-   * - 3
-     - Hauppauge WinTV-HVR1250
-     - 0070:7911
-
-   * - 4
-     - DViCO FusionHDTV5 Express
-     - 18ac:d500
-
-   * - 5
-     - Hauppauge WinTV-HVR1500Q
-     - 0070:7790, 0070:7797
-
-   * - 6
-     - Hauppauge WinTV-HVR1500
-     - 0070:7710, 0070:7717
-
-   * - 7
-     - Hauppauge WinTV-HVR1200
-     - 0070:71d1, 0070:71d3
-
-   * - 8
-     - Hauppauge WinTV-HVR1700
-     - 0070:8101
-
-   * - 9
-     - Hauppauge WinTV-HVR1400
-     - 0070:8010
-
-   * - 10
-     - DViCO FusionHDTV7 Dual Express
-     - 18ac:d618
-
-   * - 11
-     - DViCO FusionHDTV DVB-T Dual Express
-     - 18ac:db78
-
-   * - 12
-     - Leadtek Winfast PxDVR3200 H
-     - 107d:6681
-
-   * - 13
-     - Compro VideoMate E650F
-     - 185b:e800
-
-   * - 14
-     - TurboSight TBS 6920
-     - 6920:8888
-
-   * - 15
-     - TeVii S470
-     - d470:9022
-
-   * - 16
-     - DVBWorld DVB-S2 2005
-     - 0001:2005
-
-   * - 17
-     - NetUP Dual DVB-S2 CI
-     - 1b55:2a2c
-
-   * - 18
-     - Hauppauge WinTV-HVR1270
-     - 0070:2211
-
-   * - 19
-     - Hauppauge WinTV-HVR1275
-     - 0070:2215, 0070:221d, 0070:22f2
-
-   * - 20
-     - Hauppauge WinTV-HVR1255
-     - 0070:2251, 0070:22f1
-
-   * - 21
-     - Hauppauge WinTV-HVR1210
-     - 0070:2291, 0070:2295, 0070:2299, 0070:229d, 0070:22f0, 0070:22f3, 0070:22f4, 0070:22f5
-
-   * - 22
-     - Mygica X8506 DMB-TH
-     - 14f1:8651
-
-   * - 23
-     - Magic-Pro ProHDTV Extreme 2
-     - 14f1:8657
-
-   * - 24
-     - Hauppauge WinTV-HVR1850
-     - 0070:8541
-
-   * - 25
-     - Compro VideoMate E800
-     - 1858:e800
-
-   * - 26
-     - Hauppauge WinTV-HVR1290
-     - 0070:8551
-
-   * - 27
-     - Mygica X8558 PRO DMB-TH
-     - 14f1:8578
-
-   * - 28
-     - LEADTEK WinFast PxTV1200
-     - 107d:6f22
-
-   * - 29
-     - GoTView X5 3D Hybrid
-     - 5654:2390
-
-   * - 30
-     - NetUP Dual DVB-T/C-CI RF
-     - 1b55:e2e4
-
-   * - 31
-     - Leadtek Winfast PxDVR3200 H XC4000
-     - 107d:6f39
-
-   * - 32
-     - MPX-885
-     -
-
-   * - 33
-     - Mygica X8502/X8507 ISDB-T
-     - 14f1:8502
-
-   * - 34
-     - TerraTec Cinergy T PCIe Dual
-     - 153b:117e
-
-   * - 35
-     - TeVii S471
-     - d471:9022
-
-   * - 36
-     - Hauppauge WinTV-HVR1255
-     - 0070:2259
-
-   * - 37
-     - Prof Revolution DVB-S2 8000
-     - 8000:3034
-
-   * - 38
-     - Hauppauge WinTV-HVR4400/HVR5500
-     - 0070:c108, 0070:c138, 0070:c1f8
-
-   * - 39
-     - AVerTV Hybrid Express Slim HC81R
-     - 1461:d939
-
-   * - 40
-     - TurboSight TBS 6981
-     - 6981:8888
-
-   * - 41
-     - TurboSight TBS 6980
-     - 6980:8888
-
-   * - 42
-     - Leadtek Winfast PxPVR2200
-     - 107d:6f21
-
-   * - 43
-     - Hauppauge ImpactVCB-e
-     - 0070:7133, 0070:7137
-
-   * - 44
-     - DViCO FusionHDTV DVB-T Dual Express2
-     - 18ac:db98
-
-   * - 45
-     - DVBSky T9580
-     - 4254:9580
-
-   * - 46
-     - DVBSky T980C
-     - 4254:980c
-
-   * - 47
-     - DVBSky S950C
-     - 4254:950c
-
-   * - 48
-     - Technotrend TT-budget CT2-4500 CI
-     - 13c2:3013
-
-   * - 49
-     - DVBSky S950
-     - 4254:0950
-
-   * - 50
-     - DVBSky S952
-     - 4254:0952
-
-   * - 51
-     - DVBSky T982
-     - 4254:0982
-
-   * - 52
-     - Hauppauge WinTV-HVR5525
-     - 0070:f038
-
-   * - 53
-     - Hauppauge WinTV Starburst
-     - 0070:c12a
-
-   * - 54
-     - ViewCast 260e
-     - 1576:0260
-
-   * - 55
-     - ViewCast 460e
-     - 1576:0460
-
-   * - 56
-     - Hauppauge WinTV-QuadHD-DVB
-     - 0070:6a28, 0070:6b28
-
-   * - 57
-     - Hauppauge WinTV-QuadHD-ATSC
-     - 0070:6a18, 0070:6b18
-
-   * - 58
-     - Hauppauge WinTV-HVR-1265(161111)
-     - 0070:2a18
-
-   * - 59
-     - Hauppauge WinTV-Starburst2
-     - 0070:f02a
-
-   * - 60
-     - Hauppauge WinTV-QuadHD-DVB(885)
-     -
-
-   * - 61
-     - Hauppauge WinTV-QuadHD-ATSC(885)
-     -
diff --git a/Documentation/media/v4l-drivers/cx88-cardlist.rst b/Documentation/media/v4l-drivers/cx88-cardlist.rst
deleted file mode 100644
index 56ee08028106..000000000000
--- a/Documentation/media/v4l-drivers/cx88-cardlist.rst
+++ /dev/null
@@ -1,379 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-CX88 cards list
-===============
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - PCI IDs
-
-   * - 0
-     - UNKNOWN/GENERIC
-     -
-
-   * - 1
-     - Hauppauge WinTV 34xxx models
-     - 0070:3400, 0070:3401
-
-   * - 2
-     - GDI Black Gold
-     - 14c7:0106, 14c7:0107
-
-   * - 3
-     - PixelView
-     - 1554:4811
-
-   * - 4
-     - ATI TV Wonder Pro
-     - 1002:00f8, 1002:00f9
-
-   * - 5
-     - Leadtek Winfast 2000XP Expert
-     - 107d:6611, 107d:6613
-
-   * - 6
-     - AverTV Studio 303 (M126)
-     - 1461:000b
-
-   * - 7
-     - MSI TV-@nywhere Master
-     - 1462:8606
-
-   * - 8
-     - Leadtek Winfast DV2000
-     - 107d:6620, 107d:6621
-
-   * - 9
-     - Leadtek PVR 2000
-     - 107d:663b, 107d:663c, 107d:6632, 107d:6630, 107d:6638, 107d:6631, 107d:6637, 107d:663d
-
-   * - 10
-     - IODATA GV-VCP3/PCI
-     - 10fc:d003
-
-   * - 11
-     - Prolink PlayTV PVR
-     -
-
-   * - 12
-     - ASUS PVR-416
-     - 1043:4823, 1461:c111
-
-   * - 13
-     - MSI TV-@nywhere
-     -
-
-   * - 14
-     - KWorld/VStream XPert DVB-T
-     - 17de:08a6
-
-   * - 15
-     - DViCO FusionHDTV DVB-T1
-     - 18ac:db00
-
-   * - 16
-     - KWorld LTV883RF
-     -
-
-   * - 17
-     - DViCO FusionHDTV 3 Gold-Q
-     - 18ac:d810, 18ac:d800
-
-   * - 18
-     - Hauppauge Nova-T DVB-T
-     - 0070:9002, 0070:9001, 0070:9000
-
-   * - 19
-     - Conexant DVB-T reference design
-     - 14f1:0187
-
-   * - 20
-     - Provideo PV259
-     - 1540:2580
-
-   * - 21
-     - DViCO FusionHDTV DVB-T Plus
-     - 18ac:db10, 18ac:db11
-
-   * - 22
-     - pcHDTV HD3000 HDTV
-     - 7063:3000
-
-   * - 23
-     - digitalnow DNTV Live! DVB-T
-     - 17de:a8a6
-
-   * - 24
-     - Hauppauge WinTV 28xxx (Roslyn) models
-     - 0070:2801
-
-   * - 25
-     - Digital-Logic MICROSPACE Entertainment Center (MEC)
-     - 14f1:0342
-
-   * - 26
-     - IODATA GV/BCTV7E
-     - 10fc:d035
-
-   * - 27
-     - PixelView PlayTV Ultra Pro (Stereo)
-     -
-
-   * - 28
-     - DViCO FusionHDTV 3 Gold-T
-     - 18ac:d820
-
-   * - 29
-     - ADS Tech Instant TV DVB-T PCI
-     - 1421:0334
-
-   * - 30
-     - TerraTec Cinergy 1400 DVB-T
-     - 153b:1166
-
-   * - 31
-     - DViCO FusionHDTV 5 Gold
-     - 18ac:d500
-
-   * - 32
-     - AverMedia UltraTV Media Center PCI 550
-     - 1461:8011
-
-   * - 33
-     - Kworld V-Stream Xpert DVD
-     -
-
-   * - 34
-     - ATI HDTV Wonder
-     - 1002:a101
-
-   * - 35
-     - WinFast DTV1000-T
-     - 107d:665f
-
-   * - 36
-     - AVerTV 303 (M126)
-     - 1461:000a
-
-   * - 37
-     - Hauppauge Nova-S-Plus DVB-S
-     - 0070:9201, 0070:9202
-
-   * - 38
-     - Hauppauge Nova-SE2 DVB-S
-     - 0070:9200
-
-   * - 39
-     - KWorld DVB-S 100
-     - 17de:08b2, 1421:0341
-
-   * - 40
-     - Hauppauge WinTV-HVR1100 DVB-T/Hybrid
-     - 0070:9400, 0070:9402
-
-   * - 41
-     - Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
-     - 0070:9800, 0070:9802
-
-   * - 42
-     - digitalnow DNTV Live! DVB-T Pro
-     - 1822:0025, 1822:0019
-
-   * - 43
-     - KWorld/VStream XPert DVB-T with cx22702
-     - 17de:08a1, 12ab:2300
-
-   * - 44
-     - DViCO FusionHDTV DVB-T Dual Digital
-     - 18ac:db50, 18ac:db54
-
-   * - 45
-     - KWorld HardwareMpegTV XPert
-     - 17de:0840, 1421:0305
-
-   * - 46
-     - DViCO FusionHDTV DVB-T Hybrid
-     - 18ac:db40, 18ac:db44
-
-   * - 47
-     - pcHDTV HD5500 HDTV
-     - 7063:5500
-
-   * - 48
-     - Kworld MCE 200 Deluxe
-     - 17de:0841
-
-   * - 49
-     - PixelView PlayTV P7000
-     - 1554:4813
-
-   * - 50
-     - NPG Tech Real TV FM Top 10
-     - 14f1:0842
-
-   * - 51
-     - WinFast DTV2000 H
-     - 107d:665e
-
-   * - 52
-     - Geniatech DVB-S
-     - 14f1:0084
-
-   * - 53
-     - Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
-     - 0070:1404, 0070:1400, 0070:1401, 0070:1402
-
-   * - 54
-     - Norwood Micro TV Tuner
-     -
-
-   * - 55
-     - Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
-     - c180:c980
-
-   * - 56
-     - Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
-     - 0070:9600, 0070:9601, 0070:9602
-
-   * - 57
-     - ADS Tech Instant Video PCI
-     - 1421:0390
-
-   * - 58
-     - Pinnacle PCTV HD 800i
-     - 11bd:0051
-
-   * - 59
-     - DViCO FusionHDTV 5 PCI nano
-     - 18ac:d530
-
-   * - 60
-     - Pinnacle Hybrid PCTV
-     - 12ab:1788
-
-   * - 61
-     - Leadtek TV2000 XP Global
-     - 107d:6f18, 107d:6618, 107d:6619
-
-   * - 62
-     - PowerColor RA330
-     - 14f1:ea3d
-
-   * - 63
-     - Geniatech X8000-MT DVBT
-     - 14f1:8852
-
-   * - 64
-     - DViCO FusionHDTV DVB-T PRO
-     - 18ac:db30
-
-   * - 65
-     - DViCO FusionHDTV 7 Gold
-     - 18ac:d610
-
-   * - 66
-     - Prolink Pixelview MPEG 8000GT
-     - 1554:4935
-
-   * - 67
-     - Kworld PlusTV HD PCI 120 (ATSC 120)
-     - 17de:08c1
-
-   * - 68
-     - Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid
-     - 0070:6900, 0070:6904, 0070:6902
-
-   * - 69
-     - Hauppauge WinTV-HVR4000(Lite) DVB-S/S2
-     - 0070:6905, 0070:6906
-
-   * - 70
-     - TeVii S460 DVB-S/S2
-     - d460:9022
-
-   * - 71
-     - Omicom SS4 DVB-S/S2 PCI
-     - A044:2011
-
-   * - 72
-     - TBS 8920 DVB-S/S2
-     - 8920:8888
-
-   * - 73
-     - TeVii S420 DVB-S
-     - d420:9022
-
-   * - 74
-     - Prolink Pixelview Global Extreme
-     - 1554:4976
-
-   * - 75
-     - PROF 7300 DVB-S/S2
-     - B033:3033
-
-   * - 76
-     - SATTRADE ST4200 DVB-S/S2
-     - b200:4200
-
-   * - 77
-     - TBS 8910 DVB-S
-     - 8910:8888
-
-   * - 78
-     - Prof 6200 DVB-S
-     - b022:3022
-
-   * - 79
-     - Terratec Cinergy HT PCI MKII
-     - 153b:1177
-
-   * - 80
-     - Hauppauge WinTV-IR Only
-     - 0070:9290
-
-   * - 81
-     - Leadtek WinFast DTV1800 Hybrid
-     - 107d:6654
-
-   * - 82
-     - WinFast DTV2000 H rev. J
-     - 107d:6f2b
-
-   * - 83
-     - Prof 7301 DVB-S/S2
-     - b034:3034
-
-   * - 84
-     - Samsung SMT 7020 DVB-S
-     - 18ac:dc00, 18ac:dccd
-
-   * - 85
-     - Twinhan VP-1027 DVB-S
-     - 1822:0023
-
-   * - 86
-     - TeVii S464 DVB-S/S2
-     - d464:9022
-
-   * - 87
-     - Leadtek WinFast DTV2000 H PLUS
-     - 107d:6f42
-
-   * - 88
-     - Leadtek WinFast DTV1800 H (XC4000)
-     - 107d:6f38
-
-   * - 89
-     - Leadtek TV2000 XP Global (SC4100)
-     - 107d:6f36
-
-   * - 90
-     - Leadtek TV2000 XP Global (XC4100)
-     - 107d:6f43
diff --git a/Documentation/media/v4l-drivers/cx88.rst b/Documentation/media/v4l-drivers/cx88.rst
deleted file mode 100644
index 698c73ea2e36..000000000000
--- a/Documentation/media/v4l-drivers/cx88.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The cx88 driver
-===============
-
-Author:  Gerd Hoffmann
-
-This is a v4l2 device driver for the cx2388x chip.
-
-
-Current status
---------------
-
-video
-	- Works.
-	- Overlay isn't supported.
-
-audio
-	- Works. The TV standard detection is made by the driver, as the
-	  hardware has bugs to auto-detect.
-	- audio data dma (i.e. recording without loopback cable to the
-	  sound card) is supported via cx88-alsa.
-
-vbi
-	- Works.
-
-
-How to add support for new cards
---------------------------------
-
-The driver needs some config info for the TV cards.  This stuff is in
-cx88-cards.c.  If the driver doesn't work well you likely need a new
-entry for your card in that file.  Check the kernel log (using dmesg)
-to see whenever the driver knows your card or not.  There is a line
-like this one:
-
-.. code-block:: none
-
-	cx8800[0]: subsystem: 0070:3400, board: Hauppauge WinTV \
-		34xxx models [card=1,autodetected]
-
-If your card is listed as "board: UNKNOWN/GENERIC" it is unknown to
-the driver.  What to do then?
-
-1) Try upgrading to the latest snapshot, maybe it has been added
-   meanwhile.
-2) You can try to create a new entry yourself, have a look at
-   cx88-cards.c.  If that worked, mail me your changes as unified
-   diff ("diff -u").
-3) Or you can mail me the config information.  We need at least the
-   following information to add the card:
-
-     - the PCI Subsystem ID ("0070:3400" from the line above,
-       "lspci -v" output is fine too).
-     - the tuner type used by the card.  You can try to find one by
-       trial-and-error using the tuner=<n> insmod option.  If you
-       know which one the card has you can also have a look at the
-       list in CARDLIST.tuner
-
-Documentation missing at the cx88 datasheet
--------------------------------------------
-
-MO_OUTPUT_FORMAT (0x310164)
-
-.. code-block:: none
-
-  Previous default from DScaler: 0x1c1f0008
-  Digit 8: 31-28
-  28: PREVREMOD = 1
-
-  Digit 7: 27-24 (0xc = 12 = b1100 )
-  27: COMBALT = 1
-  26: PAL_INV_PHASE
-    (DScaler apparently set this to 1, resulted in sucky picture)
-
-  Digits 6,5: 23-16
-  25-16: COMB_RANGE = 0x1f [default] (9 bits -> max 512)
-
-  Digit 4: 15-12
-  15: DISIFX = 0
-  14: INVCBF = 0
-  13: DISADAPT = 0
-  12: NARROWADAPT = 0
-
-  Digit 3: 11-8
-  11: FORCE2H
-  10: FORCEREMD
-  9: NCHROMAEN
-  8: NREMODEN
-
-  Digit 2: 7-4
-  7-6: YCORE
-  5-4: CCORE
-
-  Digit 1: 3-0
-  3: RANGE = 1
-  2: HACTEXT
-  1: HSFMT
-
-0x47 is the sync byte for MPEG-2 transport stream packets.
-Datasheet incorrectly states to use 47 decimal. 188 is the length.
-All DVB compliant frontends output packets with this start code.
-
-Hauppauge WinTV cx88 IR information
------------------------------------
-
-The controls for the mux are GPIO [0,1] for source, and GPIO 2 for muting.
-
-====== ======== =================================================
-GPIO0  GPIO1
-====== ======== =================================================
-  0        0    TV Audio
-  1        0    FM radio
-  0        1    Line-In
-  1        1    Mono tuner bypass or CD passthru (tuner specific)
-====== ======== =================================================
-
-GPIO 16(I believe) is tied to the IR port (if present).
-
-
-From the data sheet:
-
-- Register 24'h20004  PCI Interrupt Status
-
- - bit [18]  IR_SMP_INT Set when 32 input samples have been collected over
- - gpio[16] pin into GP_SAMPLE register.
-
-What's missing from the data sheet:
-
-- Setup 4KHz sampling rate (roughly 2x oversampled; good enough for our RC5
-  compat remote)
-- set register 0x35C050 to  0xa80a80
-- enable sampling
-- set register 0x35C054 to 0x5
-- enable the IRQ bit 18 in the interrupt mask register (and
-  provide for a handler)
-
-GP_SAMPLE register is at 0x35C058
-
-Bits are then right shifted into the GP_SAMPLE register at the specified
-rate; you get an interrupt when a full DWORD is received.
-You need to recover the actual RC5 bits out of the (oversampled) IR sensor
-bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data)  An
-actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
-
-I'm pretty sure when no IR signal is present the receiver is always in a
-marking state(1); but stray light, etc can cause intermittent noise values
-as well.  Remember, this is a free running sample of the IR receiver state
-over time, so don't assume any sample starts at any particular place.
-
-Additional info
-~~~~~~~~~~~~~~~
-
-This data sheet (google search) seems to have a lovely description of the
-RC5 basics:
-http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
-
-This document has more data:
-http://www.nenya.be/beor/electronics/rc5.htm
-
-This document has a  how to decode a bi-phase data stream:
-http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
-
-This document has still more info:
-http://www.xs4all.nl/~sbp/knowledge/ir/rc5.htm
diff --git a/Documentation/media/v4l-drivers/davinci-vpbe.rst b/Documentation/media/v4l-drivers/davinci-vpbe.rst
deleted file mode 100644
index 0fde433e5c71..000000000000
--- a/Documentation/media/v4l-drivers/davinci-vpbe.rst
+++ /dev/null
@@ -1,97 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The VPBE V4L2 driver design
-===========================
-
-File partitioning
------------------
-
- V4L2 display device driver
-         drivers/media/platform/davinci/vpbe_display.c
-         drivers/media/platform/davinci/vpbe_display.h
-
- VPBE display controller
-         drivers/media/platform/davinci/vpbe.c
-         drivers/media/platform/davinci/vpbe.h
-
- VPBE venc sub device driver
-         drivers/media/platform/davinci/vpbe_venc.c
-         drivers/media/platform/davinci/vpbe_venc.h
-         drivers/media/platform/davinci/vpbe_venc_regs.h
-
- VPBE osd driver
-         drivers/media/platform/davinci/vpbe_osd.c
-         drivers/media/platform/davinci/vpbe_osd.h
-         drivers/media/platform/davinci/vpbe_osd_regs.h
-
-Functional partitioning
------------------------
-
-Consists of the following (in the same order as the list under file
-partitioning):
-
- 1. V4L2 display driver
-    Implements creation of video2 and video3 device nodes and
-    provides v4l2 device interface to manage VID0 and VID1 layers.
-
- 2. Display controller
-    Loads up VENC, OSD and external encoders such as ths8200. It provides
-    a set of API calls to V4L2 drivers to set the output/standards
-    in the VENC or external sub devices. It also provides
-    a device object to access the services from OSD subdevice
-    using sub device ops. The connection of external encoders to VENC LCD
-    controller port is done at init time based on default output and standard
-    selection or at run time when application change the output through
-    V4L2 IOCTLs.
-
-    When connected to an external encoder, vpbe controller is also responsible
-    for setting up the interface between VENC and external encoders based on
-    board specific settings (specified in board-xxx-evm.c). This allows
-    interfacing external encoders such as ths8200. The setup_if_config()
-    is implemented for this as well as configure_venc() (part of the next patch)
-    API to set timings in VENC for a specific display resolution. As of this
-    patch series, the interconnection and enabling and setting of the external
-    encoders is not present, and would be a part of the next patch series.
-
- 3. VENC subdevice module
-    Responsible for setting outputs provided through internal DACs and also
-    setting timings at LCD controller port when external encoders are connected
-    at the port or LCD panel timings required. When external encoder/LCD panel
-    is connected, the timings for a specific standard/preset is retrieved from
-    the board specific table and the values are used to set the timings in
-    venc using non-standard timing mode.
-
-    Support LCD Panel displays using the VENC. For example to support a Logic
-    PD display, it requires setting up the LCD controller port with a set of
-    timings for the resolution supported and setting the dot clock. So we could
-    add the available outputs as a board specific entry (i.e add the "LogicPD"
-    output name to board-xxx-evm.c). A table of timings for various LCDs
-    supported can be maintained in the board specific setup file to support
-    various LCD displays.As of this patch a basic driver is present, and this
-    support for external encoders and displays forms a part of the next
-    patch series.
-
- 4. OSD module
-    OSD module implements all OSD layer management and hardware specific
-    features. The VPBE module interacts with the OSD for enabling and
-    disabling appropriate features of the OSD.
-
-Current status
---------------
-
-A fully functional working version of the V4L2 driver is available. This
-driver has been tested with NTSC and PAL standards and buffer streaming.
-
-To be done
-----------
-
-vpbe display controller
-    - Add support for external encoders.
-    - add support for selecting external encoder as default at probe time.
-
-vpbe venc sub device
-    - add timings for supporting ths8200
-    - add support for LogicPD LCD.
-
-FB drivers
-    - Add support for fbdev drivers.- Ready and part of subsequent patches.
diff --git a/Documentation/media/v4l-drivers/em28xx-cardlist.rst b/Documentation/media/v4l-drivers/em28xx-cardlist.rst
deleted file mode 100644
index 2956cbdc28e0..000000000000
--- a/Documentation/media/v4l-drivers/em28xx-cardlist.rst
+++ /dev/null
@@ -1,428 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-EM28xx cards list
-=================
-
-.. tabularcolumns:: |p{1.4cm}|p{10.0cm}|p{1.9cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 12 3 16
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - Empia Chip
-     - USB IDs
-   * - 0
-     - Unknown EM2800 video grabber
-     - em2800
-     - eb1a:2800
-   * - 1
-     - Unknown EM2750/28xx video grabber
-     - em2820 or em2840
-     - eb1a:2710, eb1a:2820, eb1a:2821, eb1a:2860, eb1a:2861, eb1a:2862, eb1a:2863, eb1a:2870, eb1a:2881, eb1a:2883, eb1a:2868, eb1a:2875
-   * - 2
-     - Terratec Cinergy 250 USB
-     - em2820 or em2840
-     - 0ccd:0036
-   * - 3
-     - Pinnacle PCTV USB 2
-     - em2820 or em2840
-     - 2304:0208
-   * - 4
-     - Hauppauge WinTV USB 2
-     - em2820 or em2840
-     - 2040:4200, 2040:4201
-   * - 5
-     - MSI VOX USB 2.0
-     - em2820 or em2840
-     -
-   * - 6
-     - Terratec Cinergy 200 USB
-     - em2800
-     -
-   * - 7
-     - Leadtek Winfast USB II
-     - em2800
-     - 0413:6023
-   * - 8
-     - Kworld USB2800
-     - em2800
-     -
-   * - 9
-     - Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U
-     - em2820 or em2840
-     - 1b80:e302, 1b80:e304, 2304:0207, 2304:021a, 093b:a003
-   * - 10
-     - Hauppauge WinTV HVR 900
-     - em2880
-     - 2040:6500
-   * - 11
-     - Terratec Hybrid XS
-     - em2880
-     -
-   * - 12
-     - Kworld PVR TV 2800 RF
-     - em2820 or em2840
-     -
-   * - 13
-     - Terratec Prodigy XS
-     - em2880
-     -
-   * - 14
-     - SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
-     - em2820 or em2840
-     -
-   * - 15
-     - V-Gear PocketTV
-     - em2800
-     -
-   * - 16
-     - Hauppauge WinTV HVR 950
-     - em2883
-     - 2040:6513, 2040:6517, 2040:651b
-   * - 17
-     - Pinnacle PCTV HD Pro Stick
-     - em2880
-     - 2304:0227
-   * - 18
-     - Hauppauge WinTV HVR 900 (R2)
-     - em2880
-     - 2040:6502
-   * - 19
-     - EM2860/SAA711X Reference Design
-     - em2860
-     -
-   * - 20
-     - AMD ATI TV Wonder HD 600
-     - em2880
-     - 0438:b002
-   * - 21
-     - eMPIA Technology, Inc. GrabBeeX+ Video Encoder
-     - em2800
-     - eb1a:2801
-   * - 22
-     - EM2710/EM2750/EM2751 webcam grabber
-     - em2750
-     - eb1a:2750, eb1a:2751
-   * - 23
-     - Huaqi DLCW-130
-     - em2750
-     -
-   * - 24
-     - D-Link DUB-T210 TV Tuner
-     - em2820 or em2840
-     - 2001:f112
-   * - 25
-     - Gadmei UTV310
-     - em2820 or em2840
-     -
-   * - 26
-     - Hercules Smart TV USB 2.0
-     - em2820 or em2840
-     -
-   * - 27
-     - Pinnacle PCTV USB 2 (Philips FM1216ME)
-     - em2820 or em2840
-     -
-   * - 28
-     - Leadtek Winfast USB II Deluxe
-     - em2820 or em2840
-     -
-   * - 29
-     - EM2860/TVP5150 Reference Design
-     - em2860
-     - eb1a:5051
-   * - 30
-     - Videology 20K14XUSB USB2.0
-     - em2820 or em2840
-     -
-   * - 31
-     - Usbgear VD204v9
-     - em2821
-     -
-   * - 32
-     - Supercomp USB 2.0 TV
-     - em2821
-     -
-   * - 33
-     - Elgato Video Capture
-     - em2860
-     - 0fd9:0033
-   * - 34
-     - Terratec Cinergy A Hybrid XS
-     - em2860
-     - 0ccd:004f
-   * - 35
-     - Typhoon DVD Maker
-     - em2860
-     -
-   * - 36
-     - NetGMBH Cam
-     - em2860
-     -
-   * - 37
-     - Gadmei UTV330
-     - em2860
-     - eb1a:50a6
-   * - 38
-     - Yakumo MovieMixer
-     - em2861
-     -
-   * - 39
-     - KWorld PVRTV 300U
-     - em2861
-     - eb1a:e300
-   * - 40
-     - Plextor ConvertX PX-TV100U
-     - em2861
-     - 093b:a005
-   * - 41
-     - Kworld 350 U DVB-T
-     - em2870
-     - eb1a:e350
-   * - 42
-     - Kworld 355 U DVB-T
-     - em2870
-     - eb1a:e355, eb1a:e357, eb1a:e359
-   * - 43
-     - Terratec Cinergy T XS
-     - em2870
-     -
-   * - 44
-     - Terratec Cinergy T XS (MT2060)
-     - em2870
-     - 0ccd:0043
-   * - 45
-     - Pinnacle PCTV DVB-T
-     - em2870
-     -
-   * - 46
-     - Compro, VideoMate U3
-     - em2870
-     - 185b:2870
-   * - 47
-     - KWorld DVB-T 305U
-     - em2880
-     - eb1a:e305
-   * - 48
-     - KWorld DVB-T 310U
-     - em2880
-     -
-   * - 49
-     - MSI DigiVox A/D
-     - em2880
-     - eb1a:e310
-   * - 50
-     - MSI DigiVox A/D II
-     - em2880
-     - eb1a:e320
-   * - 51
-     - Terratec Hybrid XS Secam
-     - em2880
-     - 0ccd:004c
-   * - 52
-     - DNT DA2 Hybrid
-     - em2881
-     -
-   * - 53
-     - Pinnacle Hybrid Pro
-     - em2881
-     -
-   * - 54
-     - Kworld VS-DVB-T 323UR
-     - em2882
-     - eb1a:e323
-   * - 55
-     - Terratec Cinergy Hybrid T USB XS (em2882)
-     - em2882
-     - 0ccd:005e, 0ccd:0042
-   * - 56
-     - Pinnacle Hybrid Pro (330e)
-     - em2882
-     - 2304:0226
-   * - 57
-     - Kworld PlusTV HD Hybrid 330
-     - em2883
-     - eb1a:a316
-   * - 58
-     - Compro VideoMate ForYou/Stereo
-     - em2820 or em2840
-     - 185b:2041
-   * - 59
-     - Pinnacle PCTV HD Mini
-     - em2874
-     - 2304:023f
-   * - 60
-     - Hauppauge WinTV HVR 850
-     - em2883
-     - 2040:651f
-   * - 61
-     - Pixelview PlayTV Box 4 USB 2.0
-     - em2820 or em2840
-     -
-   * - 62
-     - Gadmei TVR200
-     - em2820 or em2840
-     -
-   * - 63
-     - Kaiomy TVnPC U2
-     - em2860
-     - eb1a:e303
-   * - 64
-     - Easy Cap Capture DC-60
-     - em2860
-     - 1b80:e309
-   * - 65
-     - IO-DATA GV-MVP/SZ
-     - em2820 or em2840
-     - 04bb:0515
-   * - 66
-     - Empire dual TV
-     - em2880
-     -
-   * - 67
-     - Terratec Grabby
-     - em2860
-     - 0ccd:0096, 0ccd:10AF
-   * - 68
-     - Terratec AV350
-     - em2860
-     - 0ccd:0084
-   * - 69
-     - KWorld ATSC 315U HDTV TV Box
-     - em2882
-     - eb1a:a313
-   * - 70
-     - Evga inDtube
-     - em2882
-     -
-   * - 71
-     - Silvercrest Webcam 1.3mpix
-     - em2820 or em2840
-     -
-   * - 72
-     - Gadmei UTV330+
-     - em2861
-     -
-   * - 73
-     - Reddo DVB-C USB TV Box
-     - em2870
-     -
-   * - 74
-     - Actionmaster/LinXcel/Digitus VC211A
-     - em2800
-     -
-   * - 75
-     - Dikom DK300
-     - em2882
-     -
-   * - 76
-     - KWorld PlusTV 340U or UB435-Q (ATSC)
-     - em2870
-     - 1b80:a340
-   * - 77
-     - EM2874 Leadership ISDBT
-     - em2874
-     -
-   * - 78
-     - PCTV nanoStick T2 290e
-     - em28174
-     - 2013:024f
-   * - 79
-     - Terratec Cinergy H5
-     - em2884
-     - eb1a:2885, 0ccd:10a2, 0ccd:10ad, 0ccd:10b6
-   * - 80
-     - PCTV DVB-S2 Stick (460e)
-     - em28174
-     - 2013:024c
-   * - 81
-     - Hauppauge WinTV HVR 930C
-     - em2884
-     - 2040:1605
-   * - 82
-     - Terratec Cinergy HTC Stick
-     - em2884
-     - 0ccd:00b2
-   * - 83
-     - Honestech Vidbox NW03
-     - em2860
-     - eb1a:5006
-   * - 84
-     - MaxMedia UB425-TC
-     - em2874
-     - 1b80:e425
-   * - 85
-     - PCTV QuatroStick (510e)
-     - em2884
-     - 2304:0242
-   * - 86
-     - PCTV QuatroStick nano (520e)
-     - em2884
-     - 2013:0251
-   * - 87
-     - Terratec Cinergy HTC USB XS
-     - em2884
-     - 0ccd:008e, 0ccd:00ac
-   * - 88
-     - C3 Tech Digital Duo HDTV/SDTV USB
-     - em2884
-     - 1b80:e755
-   * - 89
-     - Delock 61959
-     - em2874
-     - 1b80:e1cc
-   * - 90
-     - KWorld USB ATSC TV Stick UB435-Q V2
-     - em2874
-     - 1b80:e346
-   * - 91
-     - SpeedLink Vicious And Devine Laplace webcam
-     - em2765
-     - 1ae7:9003, 1ae7:9004
-   * - 92
-     - PCTV DVB-S2 Stick (461e)
-     - em28178
-     - 2013:0258
-   * - 93
-     - KWorld USB ATSC TV Stick UB435-Q V3
-     - em2874
-     - 1b80:e34c
-   * - 94
-     - PCTV tripleStick (292e)
-     - em28178
-     - 2013:025f, 2013:0264, 2040:0264, 2040:8264, 2040:8268, 2040:8268
-   * - 95
-     - Leadtek VC100
-     - em2861
-     - 0413:6f07
-   * - 96
-     - Terratec Cinergy T2 Stick HD
-     - em28178
-     - eb1a:8179
-   * - 97
-     - Elgato EyeTV Hybrid 2008 INT
-     - em2884
-     - 0fd9:0018
-   * - 98
-     - PLEX PX-BCUD
-     - em28178
-     - 3275:0085
-   * - 99
-     - Hauppauge WinTV-dualHD DVB
-     - em28174
-     - 2040:0265, 2040:8265
-   * - 100
-     - Hauppauge WinTV-dualHD 01595 ATSC/QAM
-     - em28174
-     - 2040:026d, 2040:826d
-   * - 101
-     - Terratec Cinergy H6 rev. 2
-     - em2884
-     - 0ccd:10b2
-   * - 102
-     - :ZOLID HYBRID TV STICK
-     - em2882
-     -
diff --git a/Documentation/media/v4l-drivers/fimc.rst b/Documentation/media/v4l-drivers/fimc.rst
deleted file mode 100644
index 74585ba48b7f..000000000000
--- a/Documentation/media/v4l-drivers/fimc.rst
+++ /dev/null
@@ -1,171 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-The Samsung S5P/EXYNOS4 FIMC driver
-===================================
-
-Copyright |copy| 2012 - 2013 Samsung Electronics Co., Ltd.
-
-The FIMC (Fully Interactive Mobile Camera) device available in Samsung
-SoC Application Processors is an integrated camera host interface, color
-space converter, image resizer and rotator.  It's also capable of capturing
-data from LCD controller (FIMD) through the SoC internal writeback data
-path.  There are multiple FIMC instances in the SoCs (up to 4), having
-slightly different capabilities, like pixel alignment constraints, rotator
-availability, LCD writeback support, etc. The driver is located at
-drivers/media/platform/exynos4-is directory.
-
-Supported SoCs
---------------
-
-S5PC100 (mem-to-mem only), S5PV210, EXYNOS4210
-
-Supported features
-------------------
-
-- camera parallel interface capture (ITU-R.BT601/565);
-- camera serial interface capture (MIPI-CSI2);
-- memory-to-memory processing (color space conversion, scaling, mirror
-  and rotation);
-- dynamic pipeline re-configuration at runtime (re-attachment of any FIMC
-  instance to any parallel video input or any MIPI-CSI front-end);
-- runtime PM and system wide suspend/resume
-
-Not currently supported
------------------------
-
-- LCD writeback input
-- per frame clock gating (mem-to-mem)
-
-Files partitioning
-------------------
-
-- media device driver
-  drivers/media/platform/exynos4-is/media-dev.[ch]
-
-- camera capture video device driver
-  drivers/media/platform/exynos4-is/fimc-capture.c
-
-- MIPI-CSI2 receiver subdev
-  drivers/media/platform/exynos4-is/mipi-csis.[ch]
-
-- video post-processor (mem-to-mem)
-  drivers/media/platform/exynos4-is/fimc-core.c
-
-- common files
-  drivers/media/platform/exynos4-is/fimc-core.h
-  drivers/media/platform/exynos4-is/fimc-reg.h
-  drivers/media/platform/exynos4-is/regs-fimc.h
-
-User space interfaces
----------------------
-
-Media device interface
-~~~~~~~~~~~~~~~~~~~~~~
-
-The driver supports Media Controller API as defined at :ref:`media_controller`.
-The media device driver name is "SAMSUNG S5P FIMC".
-
-The purpose of this interface is to allow changing assignment of FIMC instances
-to the SoC peripheral camera input at runtime and optionally to control internal
-connections of the MIPI-CSIS device(s) to the FIMC entities.
-
-The media device interface allows to configure the SoC for capturing image
-data from the sensor through more than one FIMC instance (e.g. for simultaneous
-viewfinder and still capture setup).
-Reconfiguration is done by enabling/disabling media links created by the driver
-during initialization. The internal device topology can be easily discovered
-through media entity and links enumeration.
-
-Memory-to-memory video node
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-V4L2 memory-to-memory interface at /dev/video? device node.  This is standalone
-video device, it has no media pads. However please note the mem-to-mem and
-capture video node operation on same FIMC instance is not allowed.  The driver
-detects such cases but the applications should prevent them to avoid an
-undefined behaviour.
-
-Capture video node
-~~~~~~~~~~~~~~~~~~
-
-The driver supports V4L2 Video Capture Interface as defined at
-:ref:`devices`.
-
-At the capture and mem-to-mem video nodes only the multi-planar API is
-supported. For more details see: :ref:`planar-apis`.
-
-Camera capture subdevs
-~~~~~~~~~~~~~~~~~~~~~~
-
-Each FIMC instance exports a sub-device node (/dev/v4l-subdev?), a sub-device
-node is also created per each available and enabled at the platform level
-MIPI-CSI receiver device (currently up to two).
-
-sysfs
-~~~~~
-
-In order to enable more precise camera pipeline control through the sub-device
-API the driver creates a sysfs entry associated with "s5p-fimc-md" platform
-device. The entry path is: /sys/platform/devices/s5p-fimc-md/subdev_conf_mode.
-
-In typical use case there could be a following capture pipeline configuration:
-sensor subdev -> mipi-csi subdev -> fimc subdev -> video node
-
-When we configure these devices through sub-device API at user space, the
-configuration flow must be from left to right, and the video node is
-configured as last one.
-When we don't use sub-device user space API the whole configuration of all
-devices belonging to the pipeline is done at the video node driver.
-The sysfs entry allows to instruct the capture node driver not to configure
-the sub-devices (format, crop), to avoid resetting the subdevs' configuration
-when the last configuration steps at the video node is performed.
-
-For full sub-device control support (subdevs configured at user space before
-starting streaming):
-
-.. code-block:: none
-
-	# echo "sub-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode
-
-For V4L2 video node control only (subdevs configured internally by the host
-driver):
-
-.. code-block:: none
-
-	# echo "vid-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode
-
-This is a default option.
-
-5. Device mapping to video and subdev device nodes
---------------------------------------------------
-
-There are associated two video device nodes with each device instance in
-hardware - video capture and mem-to-mem and additionally a subdev node for
-more precise FIMC capture subsystem control. In addition a separate v4l2
-sub-device node is created per each MIPI-CSIS device.
-
-How to find out which /dev/video? or /dev/v4l-subdev? is assigned to which
-device?
-
-You can either grep through the kernel log to find relevant information, i.e.
-
-.. code-block:: none
-
-	# dmesg | grep -i fimc
-
-(note that udev, if present, might still have rearranged the video nodes),
-
-or retrieve the information from /dev/media? with help of the media-ctl tool:
-
-.. code-block:: none
-
-	# media-ctl -p
-
-7. Build
---------
-
-If the driver is built as a loadable kernel module (CONFIG_VIDEO_SAMSUNG_S5P_FIMC=m)
-two modules are created (in addition to the core v4l2 modules): s5p-fimc.ko and
-optional s5p-csis.ko (MIPI-CSI receiver subdev).
diff --git a/Documentation/media/v4l-drivers/fourcc.rst b/Documentation/media/v4l-drivers/fourcc.rst
deleted file mode 100644
index d3482c40da62..000000000000
--- a/Documentation/media/v4l-drivers/fourcc.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Guidelines for Video4Linux pixel format 4CCs
-============================================
-
-Guidelines for Video4Linux 4CC codes defined using v4l2_fourcc() are
-specified in this document. First of the characters defines the nature of
-the pixel format, compression and colour space. The interpretation of the
-other three characters depends on the first one.
-
-Existing 4CCs may not obey these guidelines.
-
-Raw bayer
----------
-
-The following first characters are used by raw bayer formats:
-
-- B: raw bayer, uncompressed
-- b: raw bayer, DPCM compressed
-- a: A-law compressed
-- u: u-law compressed
-
-2nd character: pixel order
-
-- B: BGGR
-- G: GBRG
-- g: GRBG
-- R: RGGB
-
-3rd character: uncompressed bits-per-pixel 0--9, A--
-
-4th character: compressed bits-per-pixel 0--9, A--
diff --git a/Documentation/media/v4l-drivers/gspca-cardlist.rst b/Documentation/media/v4l-drivers/gspca-cardlist.rst
deleted file mode 100644
index adda933616f1..000000000000
--- a/Documentation/media/v4l-drivers/gspca-cardlist.rst
+++ /dev/null
@@ -1,451 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The gspca cards list
-====================
-
-The modules for the gspca webcam drivers are:
-
-- gspca_main: main driver
-- gspca\_\ *driver*: subdriver module with *driver* as follows
-
-=========	=========	===================================================================
-*driver*	vend:prod	Device
-=========	=========	===================================================================
-spca501         0000:0000	MystFromOri Unknown Camera
-spca508         0130:0130	Clone Digital Webcam 11043
-se401           03e8:0004	Endpoints/AoxSE401
-zc3xx           03f0:1b07	HP Premium Starter Cam
-m5602           0402:5602	ALi Video Camera Controller
-spca501         040a:0002	Kodak DVC-325
-spca500         040a:0300	Kodak EZ200
-zc3xx           041e:041e	Creative WebCam Live!
-ov519           041e:4003	Video Blaster WebCam Go Plus
-stv0680         041e:4007	Go Mini
-spca500         041e:400a	Creative PC-CAM 300
-sunplus         041e:400b	Creative PC-CAM 600
-sunplus         041e:4012	PC-Cam350
-sunplus         041e:4013	Creative Pccam750
-zc3xx           041e:4017	Creative Webcam Mobile PD1090
-spca508         041e:4018	Creative Webcam Vista (PD1100)
-spca561         041e:401a	Creative Webcam Vista (PD1100)
-zc3xx           041e:401c	Creative NX
-spca505         041e:401d	Creative Webcam NX ULTRA
-zc3xx           041e:401e	Creative Nx Pro
-zc3xx           041e:401f	Creative Webcam Notebook PD1171
-zc3xx           041e:4022	Webcam NX Pro
-pac207          041e:4028	Creative Webcam Vista Plus
-zc3xx           041e:4029	Creative WebCam Vista Pro
-zc3xx           041e:4034	Creative Instant P0620
-zc3xx           041e:4035	Creative Instant P0620D
-zc3xx           041e:4036	Creative Live !
-sq930x          041e:4038	Creative Joy-IT
-zc3xx           041e:403a	Creative Nx Pro 2
-spca561         041e:403b	Creative Webcam Vista (VF0010)
-sq930x          041e:403c	Creative Live! Ultra
-sq930x          041e:403d	Creative Live! Ultra for Notebooks
-sq930x          041e:4041	Creative Live! Motion
-zc3xx           041e:4051	Creative Live!Cam Notebook Pro (VF0250)
-ov519           041e:4052	Creative Live! VISTA IM
-zc3xx           041e:4053	Creative Live!Cam Video IM
-vc032x          041e:405b	Creative Live! Cam Notebook Ultra (VC0130)
-ov519           041e:405f	Creative Live! VISTA VF0330
-ov519           041e:4060	Creative Live! VISTA VF0350
-ov519           041e:4061	Creative Live! VISTA VF0400
-ov519           041e:4064	Creative Live! VISTA VF0420
-ov519           041e:4067	Creative Live! Cam Video IM (VF0350)
-ov519           041e:4068	Creative Live! VISTA VF0470
-sn9c2028        0458:7003	GeniusVideocam Live v2
-spca561         0458:7004	Genius VideoCAM Express V2
-sn9c2028        0458:7005	Genius Smart 300, version 2
-sunplus         0458:7006	Genius Dsc 1.3 Smart
-zc3xx           0458:7007	Genius VideoCam V2
-zc3xx           0458:700c	Genius VideoCam V3
-zc3xx           0458:700f	Genius VideoCam Web V2
-sonixj          0458:7025	Genius Eye 311Q
-sn9c20x         0458:7029	Genius Look 320s
-sonixj          0458:702e	Genius Slim 310 NB
-sn9c20x         0458:7045	Genius Look 1320 V2
-sn9c20x         0458:704a	Genius Slim 1320
-sn9c20x         0458:704c	Genius i-Look 1321
-sn9c20x         045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)
-sonixj          045e:00f5	MicroSoft VX3000
-sonixj          045e:00f7	MicroSoft VX1000
-ov519           045e:028c	Micro$oft xbox cam
-kinect          045e:02ae	Xbox NUI Camera
-kinect          045e:02bf	Kinect for Windows NUI Camera
-spca561         0461:0815	Micro Innovations IC200 Webcam
-sunplus         0461:0821	Fujifilm MV-1
-zc3xx           0461:0a00	MicroInnovation WebCam320
-stv06xx         046D:08F0	QuickCamMessenger
-stv06xx         046D:08F5	QuickCamCommunicate
-stv06xx         046D:08F6	QuickCamMessenger (new)
-stv06xx         046d:0840	QuickCamExpress
-stv06xx         046d:0850	LEGOcam / QuickCam Web
-stv06xx         046d:0870	DexxaWebCam USB
-spca500         046d:0890	Logitech QuickCam traveler
-vc032x          046d:0892	Logitech Orbicam
-vc032x          046d:0896	Logitech Orbicam
-vc032x          046d:0897	Logitech QuickCam for Dell notebooks
-zc3xx           046d:089d	Logitech QuickCam E2500
-zc3xx           046d:08a0	Logitech QC IM
-zc3xx           046d:08a1	Logitech QC IM 0x08A1 +sound
-zc3xx           046d:08a2	Labtec Webcam Pro
-zc3xx           046d:08a3	Logitech QC Chat
-zc3xx           046d:08a6	Logitech QCim
-zc3xx           046d:08a7	Logitech QuickCam Image
-zc3xx           046d:08a9	Logitech Notebook Deluxe
-zc3xx           046d:08aa	Labtec Webcam Notebook
-zc3xx           046d:08ac	Logitech QuickCam Cool
-zc3xx           046d:08ad	Logitech QCCommunicate STX
-zc3xx           046d:08ae	Logitech QuickCam for Notebooks
-zc3xx           046d:08af	Logitech QuickCam Cool
-zc3xx           046d:08b9	Logitech QuickCam Express
-zc3xx           046d:08d7	Logitech QCam STX
-zc3xx           046d:08d8	Logitech Notebook Deluxe
-zc3xx           046d:08d9	Logitech QuickCam IM/Connect
-zc3xx           046d:08da	Logitech QuickCam Messenger
-zc3xx           046d:08dd	Logitech QuickCam for Notebooks
-spca500         046d:0900	Logitech Inc. ClickSmart 310
-spca500         046d:0901	Logitech Inc. ClickSmart 510
-sunplus         046d:0905	Logitech ClickSmart 820
-tv8532          046d:0920	Logitech QuickCam Express
-tv8532          046d:0921	Labtec Webcam
-spca561         046d:0928	Logitech QC Express Etch2
-spca561         046d:0929	Labtec Webcam Elch2
-spca561         046d:092a	Logitech QC for Notebook
-spca561         046d:092b	Labtec Webcam Plus
-spca561         046d:092c	Logitech QC chat Elch2
-spca561         046d:092d	Logitech QC Elch2
-spca561         046d:092e	Logitech QC Elch2
-spca561         046d:092f	Logitech QuickCam Express Plus
-sunplus         046d:0960	Logitech ClickSmart 420
-nw80x           046d:d001	Logitech QuickCam Pro (dark focus ring)
-se401           0471:030b	PhilipsPCVC665K
-sunplus         0471:0322	Philips DMVC1300K
-zc3xx           0471:0325	Philips SPC 200 NC
-zc3xx           0471:0326	Philips SPC 300 NC
-sonixj          0471:0327	Philips SPC 600 NC
-sonixj          0471:0328	Philips SPC 700 NC
-zc3xx           0471:032d	Philips SPC 210 NC
-zc3xx           0471:032e	Philips SPC 315 NC
-sonixj          0471:0330	Philips SPC 710 NC
-se401           047d:5001	Kensington67014
-se401           047d:5002	Kensington6701(5/7)
-se401           047d:5003	Kensington67016
-spca501         0497:c001	Smile International
-sunplus         04a5:3003	Benq DC 1300
-sunplus         04a5:3008	Benq DC 1500
-sunplus         04a5:300a	Benq DC 3410
-spca500         04a5:300c	Benq DC 1016
-benq            04a5:3035	Benq DC E300
-vicam           04c1:009d	HomeConnect Webcam [vicam]
-konica          04c8:0720	IntelYC 76
-finepix         04cb:0104	Fujifilm FinePix 4800
-finepix         04cb:0109	Fujifilm FinePix A202
-finepix         04cb:010b	Fujifilm FinePix A203
-finepix         04cb:010f	Fujifilm FinePix A204
-finepix         04cb:0111	Fujifilm FinePix A205
-finepix         04cb:0113	Fujifilm FinePix A210
-finepix         04cb:0115	Fujifilm FinePix A303
-finepix         04cb:0117	Fujifilm FinePix A310
-finepix         04cb:0119	Fujifilm FinePix F401
-finepix         04cb:011b	Fujifilm FinePix F402
-finepix         04cb:011d	Fujifilm FinePix F410
-finepix         04cb:0121	Fujifilm FinePix F601
-finepix         04cb:0123	Fujifilm FinePix F700
-finepix         04cb:0125	Fujifilm FinePix M603
-finepix         04cb:0127	Fujifilm FinePix S300
-finepix         04cb:0129	Fujifilm FinePix S304
-finepix         04cb:012b	Fujifilm FinePix S500
-finepix         04cb:012d	Fujifilm FinePix S602
-finepix         04cb:012f	Fujifilm FinePix S700
-finepix         04cb:0131	Fujifilm FinePix unknown model
-finepix         04cb:013b	Fujifilm FinePix unknown model
-finepix         04cb:013d	Fujifilm FinePix unknown model
-finepix         04cb:013f	Fujifilm FinePix F420
-sunplus         04f1:1001	JVC GC A50
-spca561         04fc:0561	Flexcam 100
-spca1528        04fc:1528	Sunplus MD80 clone
-sunplus         04fc:500c	Sunplus CA500C
-sunplus         04fc:504a	Aiptek Mini PenCam 1.3
-sunplus         04fc:504b	Maxell MaxPocket LE 1.3
-sunplus         04fc:5330	Digitrex 2110
-sunplus         04fc:5360	Sunplus Generic
-spca500         04fc:7333	PalmPixDC85
-sunplus         04fc:ffff	Pure DigitalDakota
-nw80x           0502:d001	DVC V6
-spca501         0506:00df	3Com HomeConnect Lite
-sunplus         052b:1507	Megapixel 5 Pretec DC-1007
-sunplus         052b:1513	Megapix V4
-sunplus         052b:1803	MegaImage VI
-nw80x           052b:d001	EZCam Pro p35u
-tv8532          0545:808b	Veo Stingray
-tv8532          0545:8333	Veo Stingray
-sunplus         0546:3155	Polaroid PDC3070
-sunplus         0546:3191	Polaroid Ion 80
-sunplus         0546:3273	Polaroid PDC2030
-touptek         0547:6801	TTUCMOS08000KPB, AS MU800
-dtcs033         0547:7303	Anchor Chips, Inc
-ov519           054c:0154	Sonny toy4
-ov519           054c:0155	Sonny toy5
-cpia1           0553:0002	CPIA CPiA (version1) based cameras
-stv0680         0553:0202	STV0680 Camera
-zc3xx           055f:c005	Mustek Wcam300A
-spca500         055f:c200	Mustek Gsmart 300
-sunplus         055f:c211	Kowa Bs888e Microcamera
-spca500         055f:c220	Gsmart Mini
-sunplus         055f:c230	Mustek Digicam 330K
-sunplus         055f:c232	Mustek MDC3500
-sunplus         055f:c360	Mustek DV4000 Mpeg4
-sunplus         055f:c420	Mustek gSmart Mini 2
-sunplus         055f:c430	Mustek Gsmart LCD 2
-sunplus         055f:c440	Mustek DV 3000
-sunplus         055f:c520	Mustek gSmart Mini 3
-sunplus         055f:c530	Mustek Gsmart LCD 3
-sunplus         055f:c540	Gsmart D30
-sunplus         055f:c630	Mustek MDC4000
-sunplus         055f:c650	Mustek MDC5500Z
-nw80x           055f:d001	Mustek Wcam 300 mini
-zc3xx           055f:d003	Mustek WCam300A
-zc3xx           055f:d004	Mustek WCam300 AN
-conex           0572:0041	Creative Notebook cx11646
-ov519           05a9:0511	Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Camera
-ov519           05a9:0518	Creative WebCam
-ov519           05a9:0519	OV519 Microphone
-ov519           05a9:0530	OmniVision
-ov534_9         05a9:1550	OmniVision VEHO Filmscanner
-ov519           05a9:2800	OmniVision SuperCAM
-ov519           05a9:4519	Webcam Classic
-ov534_9         05a9:8065	OmniVision test kit ov538+ov9712
-ov519           05a9:8519	OmniVision
-ov519           05a9:a511	D-Link USB Digital Video Camera
-ov519           05a9:a518	D-Link DSB-C310 Webcam
-sunplus         05da:1018	Digital Dream Enigma 1.3
-stk014          05e1:0893	Syntek DV4000
-gl860           05e3:0503	Genesys Logic PC Camera
-gl860           05e3:f191	Genesys Logic PC Camera
-vicam           0602:1001	ViCam Webcam
-spca561         060b:a001	Maxell Compact Pc PM3
-zc3xx           0698:2003	CTX M730V built in
-topro           06a2:0003	TP6800 PC Camera, CmoX CX0342 webcam
-topro           06a2:6810	Creative Qmax
-nw80x           06a5:0000	Typhoon Webcam 100 USB
-nw80x           06a5:d001	Divio based webcams
-nw80x           06a5:d800	Divio Chicony TwinkleCam, Trust SpaceCam
-spca500         06bd:0404	Agfa CL20
-spca500         06be:0800	Optimedia
-nw80x           06be:d001	EZCam Pro p35u
-sunplus         06d6:0031	Trust 610 LCD PowerC@m Zoom
-sunplus         06d6:0041	Aashima Technology B.V.
-spca506         06e1:a190	ADS Instant VCD
-ov534           06f8:3002	Hercules Blog Webcam
-ov534_9         06f8:3003	Hercules Dualpix HD Weblog
-sonixj          06f8:3004	Hercules Classic Silver
-sonixj          06f8:3008	Hercules Deluxe Optical Glass
-pac7302         06f8:3009	Hercules Classic Link
-pac7302         06f8:301b	Hercules Link
-nw80x           0728:d001	AVerMedia Camguard
-spca508         0733:0110	ViewQuest VQ110
-spca501         0733:0401	Intel Create and Share
-spca501         0733:0402	ViewQuest M318B
-spca505         0733:0430	Intel PC Camera Pro
-sunplus         0733:1311	Digital Dream Epsilon 1.3
-sunplus         0733:1314	Mercury 2.1MEG Deluxe Classic Cam
-sunplus         0733:2211	Jenoptik jdc 21 LCD
-sunplus         0733:2221	Mercury Digital Pro 3.1p
-sunplus         0733:3261	Concord 3045 spca536a
-sunplus         0733:3281	Cyberpix S550V
-spca506         0734:043b	3DeMon USB Capture aka
-cpia1           0813:0001	QX3 camera
-ov519           0813:0002	Dual Mode USB Camera Plus
-spca500         084d:0003	D-Link DSC-350
-spca500         08ca:0103	Aiptek PocketDV
-sunplus         08ca:0104	Aiptek PocketDVII 1.3
-sunplus         08ca:0106	Aiptek Pocket DV3100+
-mr97310a        08ca:0110	Trust Spyc@m 100
-mr97310a        08ca:0111	Aiptek PenCam VGA+
-sunplus         08ca:2008	Aiptek Mini PenCam 2 M
-sunplus         08ca:2010	Aiptek PocketCam 3M
-sunplus         08ca:2016	Aiptek PocketCam 2 Mega
-sunplus         08ca:2018	Aiptek Pencam SD 2M
-sunplus         08ca:2020	Aiptek Slim 3000F
-sunplus         08ca:2022	Aiptek Slim 3200
-sunplus         08ca:2024	Aiptek DV3500 Mpeg4
-sunplus         08ca:2028	Aiptek PocketCam4M
-sunplus         08ca:2040	Aiptek PocketDV4100M
-sunplus         08ca:2042	Aiptek PocketDV5100
-sunplus         08ca:2050	Medion MD 41437
-sunplus         08ca:2060	Aiptek PocketDV5300
-tv8532          0923:010f	ICM532 cams
-mr97310a        093a:010e	All known CIF cams with this ID
-mr97310a        093a:010f	All known VGA cams with this ID
-mars            093a:050f	Mars-Semi Pc-Camera
-pac207          093a:2460	Qtec Webcam 100
-pac207          093a:2461	HP Webcam
-pac207          093a:2463	Philips SPC 220 NC
-pac207          093a:2464	Labtec Webcam 1200
-pac207          093a:2468	Webcam WB-1400T
-pac207          093a:2470	Genius GF112
-pac207          093a:2471	Genius VideoCam ge111
-pac207          093a:2472	Genius VideoCam ge110
-pac207          093a:2474	Genius iLook 111
-pac207          093a:2476	Genius e-Messenger 112
-pac7311         093a:2600	PAC7311 Typhoon
-pac7311         093a:2601	Philips SPC 610 NC
-pac7311         093a:2603	Philips SPC 500 NC
-pac7311         093a:2608	Trust WB-3300p
-pac7311         093a:260e	Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
-pac7311         093a:260f	SnakeCam
-pac7302         093a:2620	Apollo AC-905
-pac7302         093a:2621	PAC731x
-pac7302         093a:2622	Genius Eye 312
-pac7302         093a:2623	Pixart Imaging, Inc.
-pac7302         093a:2624	PAC7302
-pac7302         093a:2625	Genius iSlim 310
-pac7302         093a:2626	Labtec 2200
-pac7302         093a:2627	Genius FaceCam 300
-pac7302         093a:2628	Genius iLook 300
-pac7302         093a:2629	Genious iSlim 300
-pac7302         093a:262a	Webcam 300k
-pac7302         093a:262c	Philips SPC 230 NC
-jl2005bcd       0979:0227	Various brands, 19 known cameras supported
-jeilinj         0979:0270	Sakar 57379
-jeilinj         0979:0280	Sportscam DV15, Sakar 57379
-zc3xx           0ac8:0301	Web Camera
-zc3xx           0ac8:0302	Z-star Vimicro zc0302
-vc032x          0ac8:0321	Vimicro generic vc0321
-vc032x          0ac8:0323	Vimicro Vc0323
-vc032x          0ac8:0328	A4Tech PK-130MG
-zc3xx           0ac8:301b	Z-Star zc301b
-zc3xx           0ac8:303b	Vimicro 0x303b
-zc3xx           0ac8:305b	Z-star Vimicro zc0305b
-zc3xx           0ac8:307b	PC Camera (ZS0211)
-vc032x          0ac8:c001	Sony embedded vimicro
-vc032x          0ac8:c002	Sony embedded vimicro
-vc032x          0ac8:c301	Samsung Q1 Ultra Premium
-spca508         0af9:0010	Hama USB Sightcam 100
-spca508         0af9:0011	Hama USB Sightcam 100
-ov519           0b62:0059	iBOT2 Webcam
-sonixb          0c45:6001	Genius VideoCAM NB
-sonixb          0c45:6005	Microdia Sweex Mini Webcam
-sonixb          0c45:6007	Sonix sn9c101 + Tas5110D
-sonixb          0c45:6009	spcaCam@120
-sonixb          0c45:600d	spcaCam@120
-sonixb          0c45:6011	Microdia PC Camera (SN9C102)
-sonixb          0c45:6019	Generic Sonix OV7630
-sonixb          0c45:6024	Generic Sonix Tas5130c
-sonixb          0c45:6025	Xcam Shanga
-sonixb          0c45:6027	GeniusEye 310
-sonixb          0c45:6028	Sonix Btc Pc380
-sonixb          0c45:6029	spcaCam@150
-sonixb          0c45:602a	Meade ETX-105EC Camera
-sonixb          0c45:602c	Generic Sonix OV7630
-sonixb          0c45:602d	LIC-200 LG
-sonixb          0c45:602e	Genius VideoCam Messenger
-sonixj          0c45:6040	Speed NVC 350K
-sonixj          0c45:607c	Sonix sn9c102p Hv7131R
-sonixb          0c45:6083	VideoCAM Look
-sonixb          0c45:608c	VideoCAM Look
-sonixb          0c45:608f	PC Camera (SN9C103 + OV7630)
-sonixb          0c45:60a8	VideoCAM Look
-sonixb          0c45:60aa	VideoCAM Look
-sonixb          0c45:60af	VideoCAM Look
-sonixb          0c45:60b0	Genius VideoCam Look
-sonixj          0c45:60c0	Sangha Sn535
-sonixj          0c45:60ce	USB-PC-Camera-168 (TALK-5067)
-sonixj          0c45:60ec	SN9C105+MO4000
-sonixj          0c45:60fb	Surfer NoName
-sonixj          0c45:60fc	LG-LIC300
-sonixj          0c45:60fe	Microdia Audio
-sonixj          0c45:6100	PC Camera (SN9C128)
-sonixj          0c45:6102	PC Camera (SN9C128)
-sonixj          0c45:610a	PC Camera (SN9C128)
-sonixj          0c45:610b	PC Camera (SN9C128)
-sonixj          0c45:610c	PC Camera (SN9C128)
-sonixj          0c45:610e	PC Camera (SN9C128)
-sonixj          0c45:6128	Microdia/Sonix SNP325
-sonixj          0c45:612a	Avant Camera
-sonixj          0c45:612b	Speed-Link REFLECT2
-sonixj          0c45:612c	Typhoon Rasy Cam 1.3MPix
-sonixj          0c45:612e	PC Camera (SN9C110)
-sonixj          0c45:6130	Sonix Pccam
-sonixj          0c45:6138	Sn9c120 Mo4000
-sonixj          0c45:613a	Microdia Sonix PC Camera
-sonixj          0c45:613b	Surfer SN-206
-sonixj          0c45:613c	Sonix Pccam168
-sonixj          0c45:613e	PC Camera (SN9C120)
-sonixj          0c45:6142	Hama PC-Webcam AC-150
-sonixj          0c45:6143	Sonix Pccam168
-sonixj          0c45:6148	Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia
-sonixj          0c45:614a	Frontech E-Ccam (JIL-2225)
-sn9c20x         0c45:6240	PC Camera (SN9C201 + MT9M001)
-sn9c20x         0c45:6242	PC Camera (SN9C201 + MT9M111)
-sn9c20x         0c45:6248	PC Camera (SN9C201 + OV9655)
-sn9c20x         0c45:624c	PC Camera (SN9C201 + MT9M112)
-sn9c20x         0c45:624e	PC Camera (SN9C201 + SOI968)
-sn9c20x         0c45:624f	PC Camera (SN9C201 + OV9650)
-sn9c20x         0c45:6251	PC Camera (SN9C201 + OV9650)
-sn9c20x         0c45:6253	PC Camera (SN9C201 + OV9650)
-sn9c20x         0c45:6260	PC Camera (SN9C201 + OV7670)
-sn9c20x         0c45:6270	PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
-sn9c20x         0c45:627b	PC Camera (SN9C201 + OV7660)
-sn9c20x         0c45:627c	PC Camera (SN9C201 + HV7131R)
-sn9c20x         0c45:627f	PC Camera (SN9C201 + OV9650)
-sn9c20x         0c45:6280	PC Camera (SN9C202 + MT9M001)
-sn9c20x         0c45:6282	PC Camera (SN9C202 + MT9M111)
-sn9c20x         0c45:6288	PC Camera (SN9C202 + OV9655)
-sn9c20x         0c45:628c	PC Camera (SN9C201 + MT9M112)
-sn9c20x         0c45:628e	PC Camera (SN9C202 + SOI968)
-sn9c20x         0c45:628f	PC Camera (SN9C202 + OV9650)
-sn9c20x         0c45:62a0	PC Camera (SN9C202 + OV7670)
-sn9c20x         0c45:62b0	PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
-sn9c20x         0c45:62b3	PC Camera (SN9C202 + OV9655)
-sn9c20x         0c45:62bb	PC Camera (SN9C202 + OV7660)
-sn9c20x         0c45:62bc	PC Camera (SN9C202 + HV7131R)
-sn9c2028        0c45:8001	Wild Planet Digital Spy Camera
-sn9c2028        0c45:8003	Sakar #11199, #6637x, #67480 keychain cams
-sn9c2028        0c45:8008	Mini-Shotz ms-350
-sn9c2028        0c45:800a	Vivitar Vivicam 3350B
-sunplus         0d64:0303	Sunplus FashionCam DXG
-ov519           0e96:c001	TRUST 380 USB2 SPACEC@M
-etoms           102c:6151	Qcam Sangha CIF
-etoms           102c:6251	Qcam xxxxxx VGA
-ov519           1046:9967	W9967CF/W9968CF WebCam IC, Video Blaster WebCam Go
-zc3xx           10fd:0128	Typhoon Webshot II USB 300k 0x0128
-spca561         10fd:7e50	FlyCam Usb 100
-zc3xx           10fd:804d	Typhoon Webshot II Webcam [zc0301]
-zc3xx           10fd:8050	Typhoon Webshot II USB 300k
-ov534           1415:2000	Sony HD Eye for PS3 (SLEH 00201)
-pac207          145f:013a	Trust WB-1300N
-pac7302         145f:013c	Trust
-sn9c20x         145f:013d	Trust WB-3600R
-vc032x          15b8:6001	HP 2.0 Megapixel
-vc032x          15b8:6002	HP 2.0 Megapixel rz406aa
-stk1135         174f:6a31	ASUSlaptop, MT9M112 sensor
-spca501         1776:501c	Arowana 300K CMOS Camera
-t613            17a1:0128	TASCORP JPEG Webcam, NGS Cyclops
-vc032x          17ef:4802	Lenovo Vc0323+MI1310_SOC
-pac7302         1ae7:2001	SpeedLinkSnappy Mic SL-6825-SBK
-pac207          2001:f115	D-Link DSB-C120
-sq905c          2770:9050	Disney pix micro (CIF)
-sq905c          2770:9051	Lego Bionicle
-sq905c          2770:9052	Disney pix micro 2 (VGA)
-sq905c          2770:905c	All 11 known cameras with this ID
-sq905           2770:9120	All 24 known cameras with this ID
-sq905c          2770:913d	All 4 known cameras with this ID
-sq930x          2770:930b	Sweex Motion Tracking / I-Tec iCam Tracer
-sq930x          2770:930c	Trust WB-3500T / NSG Robbie 2.0
-spca500         2899:012c	Toptro Industrial
-ov519           8020:ef04	ov519
-spca508         8086:0110	Intel Easy PC Camera
-spca500         8086:0630	Intel Pocket PC Camera
-spca506         99fa:8988	Grandtec V.cap
-sn9c20x         a168:0610	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
-sn9c20x         a168:0611	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
-sn9c20x         a168:0613	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
-sn9c20x         a168:0614	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
-sn9c20x         a168:0615	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
-sn9c20x         a168:0617	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
-sn9c20x         a168:0618	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
-spca561         abcd:cdee	Petcam
-=========	=========	===================================================================
diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst
deleted file mode 100644
index 1246573c1019..000000000000
--- a/Documentation/media/v4l-drivers/imx.rst
+++ /dev/null
@@ -1,705 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-i.MX Video Capture Driver
-=========================
-
-Introduction
-------------
-
-The Freescale i.MX5/6 contains an Image Processing Unit (IPU), which
-handles the flow of image frames to and from capture devices and
-display devices.
-
-For image capture, the IPU contains the following internal subunits:
-
-- Image DMA Controller (IDMAC)
-- Camera Serial Interface (CSI)
-- Image Converter (IC)
-- Sensor Multi-FIFO Controller (SMFC)
-- Image Rotator (IRT)
-- Video De-Interlacing or Combining Block (VDIC)
-
-The IDMAC is the DMA controller for transfer of image frames to and from
-memory. Various dedicated DMA channels exist for both video capture and
-display paths. During transfer, the IDMAC is also capable of vertical
-image flip, 8x8 block transfer (see IRT description), pixel component
-re-ordering (for example UYVY to YUYV) within the same colorspace, and
-packed <--> planar conversion. The IDMAC can also perform a simple
-de-interlacing by interweaving even and odd lines during transfer
-(without motion compensation which requires the VDIC).
-
-The CSI is the backend capture unit that interfaces directly with
-camera sensors over Parallel, BT.656/1120, and MIPI CSI-2 buses.
-
-The IC handles color-space conversion, resizing (downscaling and
-upscaling), horizontal flip, and 90/270 degree rotation operations.
-
-There are three independent "tasks" within the IC that can carry out
-conversions concurrently: pre-process encoding, pre-process viewfinder,
-and post-processing. Within each task, conversions are split into three
-sections: downsizing section, main section (upsizing, flip, colorspace
-conversion, and graphics plane combining), and rotation section.
-
-The IPU time-shares the IC task operations. The time-slice granularity
-is one burst of eight pixels in the downsizing section, one image line
-in the main processing section, one image frame in the rotation section.
-
-The SMFC is composed of four independent FIFOs that each can transfer
-captured frames from sensors directly to memory concurrently via four
-IDMAC channels.
-
-The IRT carries out 90 and 270 degree image rotation operations. The
-rotation operation is carried out on 8x8 pixel blocks at a time. This
-operation is supported by the IDMAC which handles the 8x8 block transfer
-along with block reordering, in coordination with vertical flip.
-
-The VDIC handles the conversion of interlaced video to progressive, with
-support for different motion compensation modes (low, medium, and high
-motion). The deinterlaced output frames from the VDIC can be sent to the
-IC pre-process viewfinder task for further conversions. The VDIC also
-contains a Combiner that combines two image planes, with alpha blending
-and color keying.
-
-In addition to the IPU internal subunits, there are also two units
-outside the IPU that are also involved in video capture on i.MX:
-
-- MIPI CSI-2 Receiver for camera sensors with the MIPI CSI-2 bus
-  interface. This is a Synopsys DesignWare core.
-- Two video multiplexers for selecting among multiple sensor inputs
-  to send to a CSI.
-
-For more info, refer to the latest versions of the i.MX5/6 reference
-manuals [#f1]_ and [#f2]_.
-
-
-Features
---------
-
-Some of the features of this driver include:
-
-- Many different pipelines can be configured via media controller API,
-  that correspond to the hardware video capture pipelines supported in
-  the i.MX.
-
-- Supports parallel, BT.565, and MIPI CSI-2 interfaces.
-
-- Concurrent independent streams, by configuring pipelines to multiple
-  video capture interfaces using independent entities.
-
-- Scaling, color-space conversion, horizontal and vertical flip, and
-  image rotation via IC task subdevs.
-
-- Many pixel formats supported (RGB, packed and planar YUV, partial
-  planar YUV).
-
-- The VDIC subdev supports motion compensated de-interlacing, with three
-  motion compensation modes: low, medium, and high motion. Pipelines are
-  defined that allow sending frames to the VDIC subdev directly from the
-  CSI. There is also support in the future for sending frames to the
-  VDIC from memory buffers via a output/mem2mem devices.
-
-- Includes a Frame Interval Monitor (FIM) that can correct vertical sync
-  problems with the ADV718x video decoders.
-
-
-Entities
---------
-
-imx6-mipi-csi2
---------------
-
-This is the MIPI CSI-2 receiver entity. It has one sink pad to receive
-the MIPI CSI-2 stream (usually from a MIPI CSI-2 camera sensor). It has
-four source pads, corresponding to the four MIPI CSI-2 demuxed virtual
-channel outputs. Multiple source pads can be enabled to independently
-stream from multiple virtual channels.
-
-This entity actually consists of two sub-blocks. One is the MIPI CSI-2
-core. This is a Synopsys Designware MIPI CSI-2 core. The other sub-block
-is a "CSI-2 to IPU gasket". The gasket acts as a demultiplexer of the
-four virtual channels streams, providing four separate parallel buses
-containing each virtual channel that are routed to CSIs or video
-multiplexers as described below.
-
-On i.MX6 solo/dual-lite, all four virtual channel buses are routed to
-two video multiplexers. Both CSI0 and CSI1 can receive any virtual
-channel, as selected by the video multiplexers.
-
-On i.MX6 Quad, virtual channel 0 is routed to IPU1-CSI0 (after selected
-by a video mux), virtual channels 1 and 2 are hard-wired to IPU1-CSI1
-and IPU2-CSI0, respectively, and virtual channel 3 is routed to
-IPU2-CSI1 (again selected by a video mux).
-
-ipuX_csiY_mux
--------------
-
-These are the video multiplexers. They have two or more sink pads to
-select from either camera sensors with a parallel interface, or from
-MIPI CSI-2 virtual channels from imx6-mipi-csi2 entity. They have a
-single source pad that routes to a CSI (ipuX_csiY entities).
-
-On i.MX6 solo/dual-lite, there are two video mux entities. One sits
-in front of IPU1-CSI0 to select between a parallel sensor and any of
-the four MIPI CSI-2 virtual channels (a total of five sink pads). The
-other mux sits in front of IPU1-CSI1, and again has five sink pads to
-select between a parallel sensor and any of the four MIPI CSI-2 virtual
-channels.
-
-On i.MX6 Quad, there are two video mux entities. One sits in front of
-IPU1-CSI0 to select between a parallel sensor and MIPI CSI-2 virtual
-channel 0 (two sink pads). The other mux sits in front of IPU2-CSI1 to
-select between a parallel sensor and MIPI CSI-2 virtual channel 3 (two
-sink pads).
-
-ipuX_csiY
----------
-
-These are the CSI entities. They have a single sink pad receiving from
-either a video mux or from a MIPI CSI-2 virtual channel as described
-above.
-
-This entity has two source pads. The first source pad can link directly
-to the ipuX_vdic entity or the ipuX_ic_prp entity, using hardware links
-that require no IDMAC memory buffer transfer.
-
-When the direct source pad is routed to the ipuX_ic_prp entity, frames
-from the CSI can be processed by one or both of the IC pre-processing
-tasks.
-
-When the direct source pad is routed to the ipuX_vdic entity, the VDIC
-will carry out motion-compensated de-interlace using "high motion" mode
-(see description of ipuX_vdic entity).
-
-The second source pad sends video frames directly to memory buffers
-via the SMFC and an IDMAC channel, bypassing IC pre-processing. This
-source pad is routed to a capture device node, with a node name of the
-format "ipuX_csiY capture".
-
-Note that since the IDMAC source pad makes use of an IDMAC channel,
-pixel reordering within the same colorspace can be carried out by the
-IDMAC channel. For example, if the CSI sink pad is receiving in UYVY
-order, the capture device linked to the IDMAC source pad can capture
-in YUYV order. Also, if the CSI sink pad is receiving a packed YUV
-format, the capture device can capture a planar YUV format such as
-YUV420.
-
-The IDMAC channel at the IDMAC source pad also supports simple
-interweave without motion compensation, which is activated if the source
-pad's field type is sequential top-bottom or bottom-top, and the
-requested capture interface field type is set to interlaced (t-b, b-t,
-or unqualified interlaced). The capture interface will enforce the same
-field order as the source pad field order (interlaced-bt if source pad
-is seq-bt, interlaced-tb if source pad is seq-tb).
-
-This subdev can generate the following event when enabling the second
-IDMAC source pad:
-
-- V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR
-
-The user application can subscribe to this event from the ipuX_csiY
-subdev node. This event is generated by the Frame Interval Monitor
-(see below for more on the FIM).
-
-Cropping in ipuX_csiY
----------------------
-
-The CSI supports cropping the incoming raw sensor frames. This is
-implemented in the ipuX_csiY entities at the sink pad, using the
-crop selection subdev API.
-
-The CSI also supports fixed divide-by-two downscaling independently in
-width and height. This is implemented in the ipuX_csiY entities at
-the sink pad, using the compose selection subdev API.
-
-The output rectangle at the ipuX_csiY source pad is the same as
-the compose rectangle at the sink pad. So the source pad rectangle
-cannot be negotiated, it must be set using the compose selection
-API at sink pad (if /2 downscale is desired, otherwise source pad
-rectangle is equal to incoming rectangle).
-
-To give an example of crop and /2 downscale, this will crop a
-1280x960 input frame to 640x480, and then /2 downscale in both
-dimensions to 320x240 (assumes ipu1_csi0 is linked to ipu1_csi0_mux):
-
-.. code-block:: none
-
-   media-ctl -V "'ipu1_csi0_mux':2[fmt:UYVY2X8/1280x960]"
-   media-ctl -V "'ipu1_csi0':0[crop:(0,0)/640x480]"
-   media-ctl -V "'ipu1_csi0':0[compose:(0,0)/320x240]"
-
-Frame Skipping in ipuX_csiY
----------------------------
-
-The CSI supports frame rate decimation, via frame skipping. Frame
-rate decimation is specified by setting the frame intervals at
-sink and source pads. The ipuX_csiY entity then applies the best
-frame skip setting to the CSI to achieve the desired frame rate
-at the source pad.
-
-The following example reduces an assumed incoming 60 Hz frame
-rate by half at the IDMAC output source pad:
-
-.. code-block:: none
-
-   media-ctl -V "'ipu1_csi0':0[fmt:UYVY2X8/640x480@1/60]"
-   media-ctl -V "'ipu1_csi0':2[fmt:UYVY2X8/640x480@1/30]"
-
-Frame Interval Monitor in ipuX_csiY
------------------------------------
-
-The adv718x decoders can occasionally send corrupt fields during
-NTSC/PAL signal re-sync (too little or too many video lines). When
-this happens, the IPU triggers a mechanism to re-establish vertical
-sync by adding 1 dummy line every frame, which causes a rolling effect
-from image to image, and can last a long time before a stable image is
-recovered. Or sometimes the mechanism doesn't work at all, causing a
-permanent split image (one frame contains lines from two consecutive
-captured images).
-
-From experiment it was found that during image rolling, the frame
-intervals (elapsed time between two EOF's) drop below the nominal
-value for the current standard, by about one frame time (60 usec),
-and remain at that value until rolling stops.
-
-While the reason for this observation isn't known (the IPU dummy
-line mechanism should show an increase in the intervals by 1 line
-time every frame, not a fixed value), we can use it to detect the
-corrupt fields using a frame interval monitor. If the FIM detects a
-bad frame interval, the ipuX_csiY subdev will send the event
-V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR. Userland can register with
-the FIM event notification on the ipuX_csiY subdev device node.
-Userland can issue a streaming restart when this event is received
-to correct the rolling/split image.
-
-The ipuX_csiY subdev includes custom controls to tweak some dials for
-FIM. If one of these controls is changed during streaming, the FIM will
-be reset and will continue at the new settings.
-
-- V4L2_CID_IMX_FIM_ENABLE
-
-Enable/disable the FIM.
-
-- V4L2_CID_IMX_FIM_NUM
-
-How many frame interval measurements to average before comparing against
-the nominal frame interval reported by the sensor. This can reduce noise
-caused by interrupt latency.
-
-- V4L2_CID_IMX_FIM_TOLERANCE_MIN
-
-If the averaged intervals fall outside nominal by this amount, in
-microseconds, the V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR event is sent.
-
-- V4L2_CID_IMX_FIM_TOLERANCE_MAX
-
-If any intervals are higher than this value, those samples are
-discarded and do not enter into the average. This can be used to
-discard really high interval errors that might be due to interrupt
-latency from high system load.
-
-- V4L2_CID_IMX_FIM_NUM_SKIP
-
-How many frames to skip after a FIM reset or stream restart before
-FIM begins to average intervals.
-
-- V4L2_CID_IMX_FIM_ICAP_CHANNEL
-- V4L2_CID_IMX_FIM_ICAP_EDGE
-
-These controls will configure an input capture channel as the method
-for measuring frame intervals. This is superior to the default method
-of measuring frame intervals via EOF interrupt, since it is not subject
-to uncertainty errors introduced by interrupt latency.
-
-Input capture requires hardware support. A VSYNC signal must be routed
-to one of the i.MX6 input capture channel pads.
-
-V4L2_CID_IMX_FIM_ICAP_CHANNEL configures which i.MX6 input capture
-channel to use. This must be 0 or 1.
-
-V4L2_CID_IMX_FIM_ICAP_EDGE configures which signal edge will trigger
-input capture events. By default the input capture method is disabled
-with a value of IRQ_TYPE_NONE. Set this control to IRQ_TYPE_EDGE_RISING,
-IRQ_TYPE_EDGE_FALLING, or IRQ_TYPE_EDGE_BOTH to enable input capture,
-triggered on the given signal edge(s).
-
-When input capture is disabled, frame intervals will be measured via
-EOF interrupt.
-
-
-ipuX_vdic
----------
-
-The VDIC carries out motion compensated de-interlacing, with three
-motion compensation modes: low, medium, and high motion. The mode is
-specified with the menu control V4L2_CID_DEINTERLACING_MODE. The VDIC
-has two sink pads and a single source pad.
-
-The direct sink pad receives from an ipuX_csiY direct pad. With this
-link the VDIC can only operate in high motion mode.
-
-When the IDMAC sink pad is activated, it receives from an output
-or mem2mem device node. With this pipeline, the VDIC can also operate
-in low and medium modes, because these modes require receiving
-frames from memory buffers. Note that an output or mem2mem device
-is not implemented yet, so this sink pad currently has no links.
-
-The source pad routes to the IC pre-processing entity ipuX_ic_prp.
-
-ipuX_ic_prp
------------
-
-This is the IC pre-processing entity. It acts as a router, routing
-data from its sink pad to one or both of its source pads.
-
-This entity has a single sink pad. The sink pad can receive from the
-ipuX_csiY direct pad, or from ipuX_vdic.
-
-This entity has two source pads. One source pad routes to the
-pre-process encode task entity (ipuX_ic_prpenc), the other to the
-pre-process viewfinder task entity (ipuX_ic_prpvf). Both source pads
-can be activated at the same time if the sink pad is receiving from
-ipuX_csiY. Only the source pad to the pre-process viewfinder task entity
-can be activated if the sink pad is receiving from ipuX_vdic (frames
-from the VDIC can only be processed by the pre-process viewfinder task).
-
-ipuX_ic_prpenc
---------------
-
-This is the IC pre-processing encode entity. It has a single sink
-pad from ipuX_ic_prp, and a single source pad. The source pad is
-routed to a capture device node, with a node name of the format
-"ipuX_ic_prpenc capture".
-
-This entity performs the IC pre-process encode task operations:
-color-space conversion, resizing (downscaling and upscaling),
-horizontal and vertical flip, and 90/270 degree rotation. Flip
-and rotation are provided via standard V4L2 controls.
-
-Like the ipuX_csiY IDMAC source, this entity also supports simple
-de-interlace without motion compensation, and pixel reordering.
-
-ipuX_ic_prpvf
--------------
-
-This is the IC pre-processing viewfinder entity. It has a single sink
-pad from ipuX_ic_prp, and a single source pad. The source pad is routed
-to a capture device node, with a node name of the format
-"ipuX_ic_prpvf capture".
-
-This entity is identical in operation to ipuX_ic_prpenc, with the same
-resizing and CSC operations and flip/rotation controls. It will receive
-and process de-interlaced frames from the ipuX_vdic if ipuX_ic_prp is
-receiving from ipuX_vdic.
-
-Like the ipuX_csiY IDMAC source, this entity supports simple
-interweaving without motion compensation. However, note that if the
-ipuX_vdic is included in the pipeline (ipuX_ic_prp is receiving from
-ipuX_vdic), it's not possible to use interweave in ipuX_ic_prpvf,
-since the ipuX_vdic has already carried out de-interlacing (with
-motion compensation) and therefore the field type output from
-ipuX_vdic can only be none (progressive).
-
-Capture Pipelines
------------------
-
-The following describe the various use-cases supported by the pipelines.
-
-The links shown do not include the backend sensor, video mux, or mipi
-csi-2 receiver links. This depends on the type of sensor interface
-(parallel or mipi csi-2). So these pipelines begin with:
-
-sensor -> ipuX_csiY_mux -> ...
-
-for parallel sensors, or:
-
-sensor -> imx6-mipi-csi2 -> (ipuX_csiY_mux) -> ...
-
-for mipi csi-2 sensors. The imx6-mipi-csi2 receiver may need to route
-to the video mux (ipuX_csiY_mux) before sending to the CSI, depending
-on the mipi csi-2 virtual channel, hence ipuX_csiY_mux is shown in
-parenthesis.
-
-Unprocessed Video Capture:
---------------------------
-
-Send frames directly from sensor to camera device interface node, with
-no conversions, via ipuX_csiY IDMAC source pad:
-
--> ipuX_csiY:2 -> ipuX_csiY capture
-
-IC Direct Conversions:
-----------------------
-
-This pipeline uses the preprocess encode entity to route frames directly
-from the CSI to the IC, to carry out scaling up to 1024x1024 resolution,
-CSC, flipping, and image rotation:
-
--> ipuX_csiY:1 -> 0:ipuX_ic_prp:1 -> 0:ipuX_ic_prpenc:1 -> ipuX_ic_prpenc capture
-
-Motion Compensated De-interlace:
---------------------------------
-
-This pipeline routes frames from the CSI direct pad to the VDIC entity to
-support motion-compensated de-interlacing (high motion mode only),
-scaling up to 1024x1024, CSC, flip, and rotation:
-
--> ipuX_csiY:1 -> 0:ipuX_vdic:2 -> 0:ipuX_ic_prp:2 -> 0:ipuX_ic_prpvf:1 -> ipuX_ic_prpvf capture
-
-
-Usage Notes
------------
-
-To aid in configuration and for backward compatibility with V4L2
-applications that access controls only from video device nodes, the
-capture device interfaces inherit controls from the active entities
-in the current pipeline, so controls can be accessed either directly
-from the subdev or from the active capture device interface. For
-example, the FIM controls are available either from the ipuX_csiY
-subdevs or from the active capture device.
-
-The following are specific usage notes for the Sabre* reference
-boards:
-
-
-SabreLite with OV5642 and OV5640
---------------------------------
-
-This platform requires the OmniVision OV5642 module with a parallel
-camera interface, and the OV5640 module with a MIPI CSI-2
-interface. Both modules are available from Boundary Devices:
-
-- https://boundarydevices.com/product/nit6x_5mp
-- https://boundarydevices.com/product/nit6x_5mp_mipi
-
-Note that if only one camera module is available, the other sensor
-node can be disabled in the device tree.
-
-The OV5642 module is connected to the parallel bus input on the i.MX
-internal video mux to IPU1 CSI0. It's i2c bus connects to i2c bus 2.
-
-The MIPI CSI-2 OV5640 module is connected to the i.MX internal MIPI CSI-2
-receiver, and the four virtual channel outputs from the receiver are
-routed as follows: vc0 to the IPU1 CSI0 mux, vc1 directly to IPU1 CSI1,
-vc2 directly to IPU2 CSI0, and vc3 to the IPU2 CSI1 mux. The OV5640 is
-also connected to i2c bus 2 on the SabreLite, therefore the OV5642 and
-OV5640 must not share the same i2c slave address.
-
-The following basic example configures unprocessed video capture
-pipelines for both sensors. The OV5642 is routed to ipu1_csi0, and
-the OV5640, transmitting on MIPI CSI-2 virtual channel 1 (which is
-imx6-mipi-csi2 pad 2), is routed to ipu1_csi1. Both sensors are
-configured to output 640x480, and the OV5642 outputs YUYV2X8, the
-OV5640 UYVY2X8:
-
-.. code-block:: none
-
-   # Setup links for OV5642
-   media-ctl -l "'ov5642 1-0042':0 -> 'ipu1_csi0_mux':1[1]"
-   media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]"
-   media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]"
-   # Setup links for OV5640
-   media-ctl -l "'ov5640 1-0040':0 -> 'imx6-mipi-csi2':0[1]"
-   media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
-   media-ctl -l "'ipu1_csi1':2 -> 'ipu1_csi1 capture':0[1]"
-   # Configure pads for OV5642 pipeline
-   media-ctl -V "'ov5642 1-0042':0 [fmt:YUYV2X8/640x480 field:none]"
-   media-ctl -V "'ipu1_csi0_mux':2 [fmt:YUYV2X8/640x480 field:none]"
-   media-ctl -V "'ipu1_csi0':2 [fmt:AYUV32/640x480 field:none]"
-   # Configure pads for OV5640 pipeline
-   media-ctl -V "'ov5640 1-0040':0 [fmt:UYVY2X8/640x480 field:none]"
-   media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
-   media-ctl -V "'ipu1_csi1':2 [fmt:AYUV32/640x480 field:none]"
-
-Streaming can then begin independently on the capture device nodes
-"ipu1_csi0 capture" and "ipu1_csi1 capture". The v4l2-ctl tool can
-be used to select any supported YUV pixelformat on the capture device
-nodes, including planar.
-
-i.MX6Q SabreAuto with ADV7180 decoder
--------------------------------------
-
-On the i.MX6Q SabreAuto, an on-board ADV7180 SD decoder is connected to the
-parallel bus input on the internal video mux to IPU1 CSI0.
-
-The following example configures a pipeline to capture from the ADV7180
-video decoder, assuming NTSC 720x480 input signals, using simple
-interweave (unconverted and without motion compensation). The adv7180
-must output sequential or alternating fields (field type 'seq-bt' for
-NTSC, or 'alternate'):
-
-.. code-block:: none
-
-   # Setup links
-   media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]"
-   media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]"
-   media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]"
-   # Configure pads
-   media-ctl -V "'adv7180 3-0021':0 [fmt:UYVY2X8/720x480 field:seq-bt]"
-   media-ctl -V "'ipu1_csi0_mux':2 [fmt:UYVY2X8/720x480]"
-   media-ctl -V "'ipu1_csi0':2 [fmt:AYUV32/720x480]"
-   # Configure "ipu1_csi0 capture" interface (assumed at /dev/video4)
-   v4l2-ctl -d4 --set-fmt-video=field=interlaced_bt
-
-Streaming can then begin on /dev/video4. The v4l2-ctl tool can also be
-used to select any supported YUV pixelformat on /dev/video4.
-
-This example configures a pipeline to capture from the ADV7180
-video decoder, assuming PAL 720x576 input signals, with Motion
-Compensated de-interlacing. The adv7180 must output sequential or
-alternating fields (field type 'seq-tb' for PAL, or 'alternate').
-
-.. code-block:: none
-
-   # Setup links
-   media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]"
-   media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]"
-   media-ctl -l "'ipu1_csi0':1 -> 'ipu1_vdic':0[1]"
-   media-ctl -l "'ipu1_vdic':2 -> 'ipu1_ic_prp':0[1]"
-   media-ctl -l "'ipu1_ic_prp':2 -> 'ipu1_ic_prpvf':0[1]"
-   media-ctl -l "'ipu1_ic_prpvf':1 -> 'ipu1_ic_prpvf capture':0[1]"
-   # Configure pads
-   media-ctl -V "'adv7180 3-0021':0 [fmt:UYVY2X8/720x576 field:seq-tb]"
-   media-ctl -V "'ipu1_csi0_mux':2 [fmt:UYVY2X8/720x576]"
-   media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]"
-   media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]"
-   media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]"
-   media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]"
-   # Configure "ipu1_ic_prpvf capture" interface (assumed at /dev/video2)
-   v4l2-ctl -d2 --set-fmt-video=field=none
-
-Streaming can then begin on /dev/video2. The v4l2-ctl tool can also be
-used to select any supported YUV pixelformat on /dev/video2.
-
-This platform accepts Composite Video analog inputs to the ADV7180 on
-Ain1 (connector J42).
-
-i.MX6DL SabreAuto with ADV7180 decoder
---------------------------------------
-
-On the i.MX6DL SabreAuto, an on-board ADV7180 SD decoder is connected to the
-parallel bus input on the internal video mux to IPU1 CSI0.
-
-The following example configures a pipeline to capture from the ADV7180
-video decoder, assuming NTSC 720x480 input signals, using simple
-interweave (unconverted and without motion compensation). The adv7180
-must output sequential or alternating fields (field type 'seq-bt' for
-NTSC, or 'alternate'):
-
-.. code-block:: none
-
-   # Setup links
-   media-ctl -l "'adv7180 4-0021':0 -> 'ipu1_csi0_mux':4[1]"
-   media-ctl -l "'ipu1_csi0_mux':5 -> 'ipu1_csi0':0[1]"
-   media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]"
-   # Configure pads
-   media-ctl -V "'adv7180 4-0021':0 [fmt:UYVY2X8/720x480 field:seq-bt]"
-   media-ctl -V "'ipu1_csi0_mux':5 [fmt:UYVY2X8/720x480]"
-   media-ctl -V "'ipu1_csi0':2 [fmt:AYUV32/720x480]"
-   # Configure "ipu1_csi0 capture" interface (assumed at /dev/video0)
-   v4l2-ctl -d0 --set-fmt-video=field=interlaced_bt
-
-Streaming can then begin on /dev/video0. The v4l2-ctl tool can also be
-used to select any supported YUV pixelformat on /dev/video0.
-
-This example configures a pipeline to capture from the ADV7180
-video decoder, assuming PAL 720x576 input signals, with Motion
-Compensated de-interlacing. The adv7180 must output sequential or
-alternating fields (field type 'seq-tb' for PAL, or 'alternate').
-
-.. code-block:: none
-
-   # Setup links
-   media-ctl -l "'adv7180 4-0021':0 -> 'ipu1_csi0_mux':4[1]"
-   media-ctl -l "'ipu1_csi0_mux':5 -> 'ipu1_csi0':0[1]"
-   media-ctl -l "'ipu1_csi0':1 -> 'ipu1_vdic':0[1]"
-   media-ctl -l "'ipu1_vdic':2 -> 'ipu1_ic_prp':0[1]"
-   media-ctl -l "'ipu1_ic_prp':2 -> 'ipu1_ic_prpvf':0[1]"
-   media-ctl -l "'ipu1_ic_prpvf':1 -> 'ipu1_ic_prpvf capture':0[1]"
-   # Configure pads
-   media-ctl -V "'adv7180 4-0021':0 [fmt:UYVY2X8/720x576 field:seq-tb]"
-   media-ctl -V "'ipu1_csi0_mux':5 [fmt:UYVY2X8/720x576]"
-   media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]"
-   media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]"
-   media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]"
-   media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]"
-   # Configure "ipu1_ic_prpvf capture" interface (assumed at /dev/video2)
-   v4l2-ctl -d2 --set-fmt-video=field=none
-
-Streaming can then begin on /dev/video2. The v4l2-ctl tool can also be
-used to select any supported YUV pixelformat on /dev/video2.
-
-This platform accepts Composite Video analog inputs to the ADV7180 on
-Ain1 (connector J42).
-
-SabreSD with MIPI CSI-2 OV5640
-------------------------------
-
-Similarly to SabreLite, the SabreSD supports a parallel interface
-OV5642 module on IPU1 CSI0, and a MIPI CSI-2 OV5640 module. The OV5642
-connects to i2c bus 1 and the OV5640 to i2c bus 2.
-
-The device tree for SabreSD includes OF graphs for both the parallel
-OV5642 and the MIPI CSI-2 OV5640, but as of this writing only the MIPI
-CSI-2 OV5640 has been tested, so the OV5642 node is currently disabled.
-The OV5640 module connects to MIPI connector J5 (sorry I don't have the
-compatible module part number or URL).
-
-The following example configures a direct conversion pipeline to capture
-from the OV5640, transmitting on MIPI CSI-2 virtual channel 1. $sensorfmt
-can be any format supported by the OV5640. $sensordim is the frame
-dimension part of $sensorfmt (minus the mbus pixel code). $outputfmt can
-be any format supported by the ipu1_ic_prpenc entity at its output pad:
-
-.. code-block:: none
-
-   # Setup links
-   media-ctl -l "'ov5640 1-003c':0 -> 'imx6-mipi-csi2':0[1]"
-   media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
-   media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
-   media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
-   media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
-   # Configure pads
-   media-ctl -V "'ov5640 1-003c':0 [fmt:$sensorfmt field:none]"
-   media-ctl -V "'imx6-mipi-csi2':2 [fmt:$sensorfmt field:none]"
-   media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/$sensordim field:none]"
-   media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/$sensordim field:none]"
-   media-ctl -V "'ipu1_ic_prpenc':1 [fmt:$outputfmt field:none]"
-
-Streaming can then begin on "ipu1_ic_prpenc capture" node. The v4l2-ctl
-tool can be used to select any supported YUV or RGB pixelformat on the
-capture device node.
-
-
-Known Issues
-------------
-
-1. When using 90 or 270 degree rotation control at capture resolutions
-   near the IC resizer limit of 1024x1024, and combined with planar
-   pixel formats (YUV420, YUV422p), frame capture will often fail with
-   no end-of-frame interrupts from the IDMAC channel. To work around
-   this, use lower resolution and/or packed formats (YUYV, RGB3, etc.)
-   when 90 or 270 rotations are needed.
-
-
-File list
----------
-
-drivers/staging/media/imx/
-include/media/imx.h
-include/linux/imx-media.h
-
-References
-----------
-
-.. [#f1] http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
-.. [#f2] http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6SDLRM.pdf
-
-
-Authors
--------
-
-- Steve Longerbeam <steve_longerbeam@mentor.com>
-- Philipp Zabel <kernel@pengutronix.de>
-- Russell King <linux@armlinux.org.uk>
-
-Copyright (C) 2012-2017 Mentor Graphics Inc.
diff --git a/Documentation/media/v4l-drivers/imx7.rst b/Documentation/media/v4l-drivers/imx7.rst
deleted file mode 100644
index 1e442c97da47..000000000000
--- a/Documentation/media/v4l-drivers/imx7.rst
+++ /dev/null
@@ -1,161 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-i.MX7 Video Capture Driver
-==========================
-
-Introduction
-------------
-
-The i.MX7 contrary to the i.MX5/6 family does not contain an Image Processing
-Unit (IPU); because of that the capabilities to perform operations or
-manipulation of the capture frames are less feature rich.
-
-For image capture the i.MX7 has three units:
-- CMOS Sensor Interface (CSI)
-- Video Multiplexer
-- MIPI CSI-2 Receiver
-
-.. code-block:: none
-
-   MIPI Camera Input ---> MIPI CSI-2 --- > |\
-                                           | \
-                                           |  \
-                                           | M |
-                                           | U | ------>  CSI ---> Capture
-                                           | X |
-                                           |  /
-   Parallel Camera Input ----------------> | /
-                                           |/
-
-For additional information, please refer to the latest versions of the i.MX7
-reference manual [#f1]_.
-
-Entities
---------
-
-imx7-mipi-csi2
---------------
-
-This is the MIPI CSI-2 receiver entity. It has one sink pad to receive the pixel
-data from MIPI CSI-2 camera sensor. It has one source pad, corresponding to the
-virtual channel 0. This module is compliant to previous version of Samsung
-D-phy, and supports two D-PHY Rx Data lanes.
-
-csi-mux
--------
-
-This is the video multiplexer. It has two sink pads to select from either camera
-sensor with a parallel interface or from MIPI CSI-2 virtual channel 0.  It has
-a single source pad that routes to the CSI.
-
-csi
----
-
-The CSI enables the chip to connect directly to external CMOS image sensor. CSI
-can interface directly with Parallel and MIPI CSI-2 buses. It has 256 x 64 FIFO
-to store received image pixel data and embedded DMA controllers to transfer data
-from the FIFO through AHB bus.
-
-This entity has one sink pad that receives from the csi-mux entity and a single
-source pad that routes video frames directly to memory buffers. This pad is
-routed to a capture device node.
-
-Usage Notes
------------
-
-To aid in configuration and for backward compatibility with V4L2 applications
-that access controls only from video device nodes, the capture device interfaces
-inherit controls from the active entities in the current pipeline, so controls
-can be accessed either directly from the subdev or from the active capture
-device interface. For example, the sensor controls are available either from the
-sensor subdevs or from the active capture device.
-
-Warp7 with OV2680
------------------
-
-On this platform an OV2680 MIPI CSI-2 module is connected to the internal MIPI
-CSI-2 receiver. The following example configures a video capture pipeline with
-an output of 800x600, and BGGR 10 bit bayer format:
-
-.. code-block:: none
-
-   # Setup links
-   media-ctl -l "'ov2680 1-0036':0 -> 'imx7-mipi-csis.0':0[1]"
-   media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi-mux':1[1]"
-   media-ctl -l "'csi-mux':2 -> 'csi':0[1]"
-   media-ctl -l "'csi':1 -> 'csi capture':0[1]"
-
-   # Configure pads for pipeline
-   media-ctl -V "'ov2680 1-0036':0 [fmt:SBGGR10_1X10/800x600 field:none]"
-   media-ctl -V "'csi-mux':1 [fmt:SBGGR10_1X10/800x600 field:none]"
-   media-ctl -V "'csi-mux':2 [fmt:SBGGR10_1X10/800x600 field:none]"
-   media-ctl -V "'imx7-mipi-csis.0':0 [fmt:SBGGR10_1X10/800x600 field:none]"
-   media-ctl -V "'csi':0 [fmt:SBGGR10_1X10/800x600 field:none]"
-
-After this streaming can start. The v4l2-ctl tool can be used to select any of
-the resolutions supported by the sensor.
-
-.. code-block:: none
-
-	# media-ctl -p
-	Media controller API version 5.2.0
-
-	Media device information
-	------------------------
-	driver          imx7-csi
-	model           imx-media
-	serial
-	bus info
-	hw revision     0x0
-	driver version  5.2.0
-
-	Device topology
-	- entity 1: csi (2 pads, 2 links)
-	            type V4L2 subdev subtype Unknown flags 0
-	            device node name /dev/v4l-subdev0
-	        pad0: Sink
-	                [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
-	                <- "csi-mux":2 [ENABLED]
-	        pad1: Source
-	                [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
-	                -> "csi capture":0 [ENABLED]
-
-	- entity 4: csi capture (1 pad, 1 link)
-	            type Node subtype V4L flags 0
-	            device node name /dev/video0
-	        pad0: Sink
-	                <- "csi":1 [ENABLED]
-
-	- entity 10: csi-mux (3 pads, 2 links)
-	             type V4L2 subdev subtype Unknown flags 0
-	             device node name /dev/v4l-subdev1
-	        pad0: Sink
-	                [fmt:Y8_1X8/1x1 field:none]
-	        pad1: Sink
-	               [fmt:SBGGR10_1X10/800x600 field:none]
-	                <- "imx7-mipi-csis.0":1 [ENABLED]
-	        pad2: Source
-	                [fmt:SBGGR10_1X10/800x600 field:none]
-	                -> "csi":0 [ENABLED]
-
-	- entity 14: imx7-mipi-csis.0 (2 pads, 2 links)
-	             type V4L2 subdev subtype Unknown flags 0
-	             device node name /dev/v4l-subdev2
-	        pad0: Sink
-	                [fmt:SBGGR10_1X10/800x600 field:none]
-	                <- "ov2680 1-0036":0 [ENABLED]
-	        pad1: Source
-	                [fmt:SBGGR10_1X10/800x600 field:none]
-	                -> "csi-mux":1 [ENABLED]
-
-	- entity 17: ov2680 1-0036 (1 pad, 1 link)
-	             type V4L2 subdev subtype Sensor flags 0
-	             device node name /dev/v4l-subdev3
-	        pad0: Source
-	                [fmt:SBGGR10_1X10/800x600@1/30 field:none colorspace:srgb]
-	                -> "imx7-mipi-csis.0":0 [ENABLED]
-
-References
-----------
-
-.. [#f1] https://www.nxp.com/docs/en/reference-manual/IMX7SRM.pdf
diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst
deleted file mode 100644
index b41fea23fe5d..000000000000
--- a/Documentation/media/v4l-drivers/index.rst
+++ /dev/null
@@ -1,68 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-.. _v4l-drivers:
-
-################################################
-Video4Linux (V4L)  driver-specific documentation
-################################################
-
-**Copyright** |copy| 1999-2016 : LinuxTV Developers
-
-This documentation is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation version 2 of the License.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-more details.
-
-For more details see the file COPYING in the source distribution of Linux.
-
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
-.. toctree::
-	:maxdepth: 5
-	:numbered:
-
-	fourcc
-	v4l-with-ir
-	tuners
-	cardlist
-	bttv
-	cafe_ccic
-	cpia2
-	cx2341x
-	cx88
-	davinci-vpbe
-	fimc
-	imx
-	imx7
-	ipu3
-	ivtv
-	max2175
-	meye
-	omap3isp
-	omap4_camera
-	philips
-	pvrusb2
-	pxa_camera
-	qcom_camss
-	radiotrack
-	rcar-fdp1
-	saa7134
-	sh_mobile_ceu_camera
-	si470x
-	si4713
-	si476x
-	soc-camera
-	uvcvideo
-	vimc
-	vivid
-	zr364xx
diff --git a/Documentation/media/v4l-drivers/ipu3.rst b/Documentation/media/v4l-drivers/ipu3.rst
deleted file mode 100644
index a694f49491f9..000000000000
--- a/Documentation/media/v4l-drivers/ipu3.rst
+++ /dev/null
@@ -1,558 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-===============================================================
-Intel Image Processing Unit 3 (IPU3) Imaging Unit (ImgU) driver
-===============================================================
-
-Copyright |copy| 2018 Intel Corporation
-
-Introduction
-============
-
-This file documents the Intel IPU3 (3rd generation Image Processing Unit)
-Imaging Unit drivers located under drivers/media/pci/intel/ipu3 (CIO2) as well
-as under drivers/staging/media/ipu3 (ImgU).
-
-The Intel IPU3 found in certain Kaby Lake (as well as certain Sky Lake)
-platforms (U/Y processor lines) is made up of two parts namely the Imaging Unit
-(ImgU) and the CIO2 device (MIPI CSI2 receiver).
-
-The CIO2 device receives the raw Bayer data from the sensors and outputs the
-frames in a format that is specific to the IPU3 (for consumption by the IPU3
-ImgU). The CIO2 driver is available as drivers/media/pci/intel/ipu3/ipu3-cio2*
-and is enabled through the CONFIG_VIDEO_IPU3_CIO2 config option.
-
-The Imaging Unit (ImgU) is responsible for processing images captured
-by the IPU3 CIO2 device. The ImgU driver sources can be found under
-drivers/staging/media/ipu3 directory. The driver is enabled through the
-CONFIG_VIDEO_IPU3_IMGU config option.
-
-The two driver modules are named ipu3_csi2 and ipu3_imgu, respectively.
-
-The drivers has been tested on Kaby Lake platforms (U/Y processor lines).
-
-Both of the drivers implement V4L2, Media Controller and V4L2 sub-device
-interfaces. The IPU3 CIO2 driver supports camera sensors connected to the CIO2
-MIPI CSI-2 interfaces through V4L2 sub-device sensor drivers.
-
-CIO2
-====
-
-The CIO2 is represented as a single V4L2 subdev, which provides a V4L2 subdev
-interface to the user space. There is a video node for each CSI-2 receiver,
-with a single media controller interface for the entire device.
-
-The CIO2 contains four independent capture channel, each with its own MIPI CSI-2
-receiver and DMA engine. Each channel is modelled as a V4L2 sub-device exposed
-to userspace as a V4L2 sub-device node and has two pads:
-
-.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|
-
-.. flat-table::
-
-    * - pad
-      - direction
-      - purpose
-
-    * - 0
-      - sink
-      - MIPI CSI-2 input, connected to the sensor subdev
-
-    * - 1
-      - source
-      - Raw video capture, connected to the V4L2 video interface
-
-The V4L2 video interfaces model the DMA engines. They are exposed to userspace
-as V4L2 video device nodes.
-
-Capturing frames in raw Bayer format
-------------------------------------
-
-CIO2 MIPI CSI2 receiver is used to capture frames (in packed raw Bayer format)
-from the raw sensors connected to the CSI2 ports. The captured frames are used
-as input to the ImgU driver.
-
-Image processing using IPU3 ImgU requires tools such as raw2pnm [#f1]_, and
-yavta [#f2]_ due to the following unique requirements and / or features specific
-to IPU3.
-
--- The IPU3 CSI2 receiver outputs the captured frames from the sensor in packed
-raw Bayer format that is specific to IPU3.
-
--- Multiple video nodes have to be operated simultaneously.
-
-Let us take the example of ov5670 sensor connected to CSI2 port 0, for a
-2592x1944 image capture.
-
-Using the media contorller APIs, the ov5670 sensor is configured to send
-frames in packed raw Bayer format to IPU3 CSI2 receiver.
-
-# This example assumes /dev/media0 as the CIO2 media device
-
-export MDEV=/dev/media0
-
-# and that ov5670 sensor is connected to i2c bus 10 with address 0x36
-
-export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036")
-
-# Establish the link for the media devices using media-ctl [#f3]_
-media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]"
-
-# Set the format for the media devices
-media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]"
-
-media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]"
-
-media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]"
-
-Once the media pipeline is configured, desired sensor specific settings
-(such as exposure and gain settings) can be set, using the yavta tool.
-
-e.g
-
-yavta -w 0x009e0903 444 $SDEV
-
-yavta -w 0x009e0913 1024 $SDEV
-
-yavta -w 0x009e0911 2046 $SDEV
-
-Once the desired sensor settings are set, frame captures can be done as below.
-
-e.g
-
-yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \
-      -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0")
-
-With the above command, 10 frames are captured at 2592x1944 resolution, with
-sGRBG10 format and output as IPU3_SGRBG10 format.
-
-The captured frames are available as /tmp/frame-#.bin files.
-
-ImgU
-====
-
-The ImgU is represented as two V4L2 subdevs, each of which provides a V4L2
-subdev interface to the user space.
-
-Each V4L2 subdev represents a pipe, which can support a maximum of 2 streams.
-This helps to support advanced camera features like Continuous View Finder (CVF)
-and Snapshot During Video(SDV).
-
-The ImgU contains two independent pipes, each modelled as a V4L2 sub-device
-exposed to userspace as a V4L2 sub-device node.
-
-Each pipe has two sink pads and three source pads for the following purpose:
-
-.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|
-
-.. flat-table::
-
-    * - pad
-      - direction
-      - purpose
-
-    * - 0
-      - sink
-      - Input raw video stream
-
-    * - 1
-      - sink
-      - Processing parameters
-
-    * - 2
-      - source
-      - Output processed video stream
-
-    * - 3
-      - source
-      - Output viewfinder video stream
-
-    * - 4
-      - source
-      - 3A statistics
-
-Each pad is connected to a corresponding V4L2 video interface, exposed to 
-userspace as a V4L2 video device node.
-
-Device operation
-----------------
-
-With ImgU, once the input video node ("ipu3-imgu 0/1":0, in
-<entity>:<pad-number> format) is queued with buffer (in packed raw Bayer
-format), ImgU starts processing the buffer and produces the video output in YUV
-format and statistics output on respective output nodes. The driver is expected
-to have buffers ready for all of parameter, output and statistics nodes, when
-input video node is queued with buffer.
-
-At a minimum, all of input, main output, 3A statistics and viewfinder
-video nodes should be enabled for IPU3 to start image processing.
-
-Each ImgU V4L2 subdev has the following set of video nodes.
-
-input, output and viewfinder video nodes
-----------------------------------------
-
-The frames (in packed raw Bayer format specific to the IPU3) received by the
-input video node is processed by the IPU3 Imaging Unit and are output to 2 video
-nodes, with each targeting a different purpose (main output and viewfinder
-output).
-
-Details onand the Bayer format specific to the IPU3 can be found in
-:ref:`v4l2-pix-fmt-ipu3-sbggr10`.
-
-The driver supports V4L2 Video Capture Interface as defined at :ref:`devices`.
-
-Only the multi-planar API is supported. More details can be found at
-:ref:`planar-apis`.
-
-Parameters video node
----------------------
-
-The parameters video node receives the ImgU algorithm parameters that are used
-to configure how the ImgU algorithms process the image.
-
-Details on processing parameters specific to the IPU3 can be found in
-:ref:`v4l2-meta-fmt-params`.
-
-3A statistics video node
-------------------------
-
-3A statistics video node is used by the ImgU driver to output the 3A (auto
-focus, auto exposure and auto white balance) statistics for the frames that are
-being processed by the ImgU to user space applications. User space applications
-can use this statistics data to compute the desired algorithm parameters for
-the ImgU.
-
-Configuring the Intel IPU3
-==========================
-
-The IPU3 ImgU pipelines can be configured using the Media Controller, defined at
-:ref:`media_controller`.
-
-Firmware binary selection
--------------------------
-
-The firmware binary is selected using the V4L2_CID_INTEL_IPU3_MODE, currently
-defined in drivers/staging/media/ipu3/include/intel-ipu3.h . "VIDEO" and "STILL"
-modes are available.
-
-Processing the image in raw Bayer format
-----------------------------------------
-
-Configuring ImgU V4L2 subdev for image processing
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The ImgU V4L2 subdevs have to be configured with media controller APIs to have
-all the video nodes setup correctly.
-
-Let us take "ipu3-imgu 0" subdev as an example.
-
-media-ctl -d $MDEV -r
-
-media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1]
-
-media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1]
-
-media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1]
-
-media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1]
-
-Also the pipe mode of the corresponding V4L2 subdev should be set as desired
-(e.g 0 for video mode or 1 for still mode) through the control id 0x009819a1 as
-below.
-
-yavta -w "0x009819A1 1" /dev/v4l-subdev7
-
-Certain hardware blocks in ImgU pipeline can change the frame resolution by
-cropping or scaling, these hardware blocks include Input Feeder(IF), Bayer Down
-Scaler (BDS) and Geometric Distortion Correction (GDC).
-There is also a block which can change the frame resolution - YUV Scaler, it is
-only applicable to the secondary output.
-
-RAW Bayer frames go through these ImgU pipeline hardware blocks and the final
-processed image output to the DDR memory.
-
-.. kernel-figure::  ipu3_rcb.svg
-   :alt: ipu3 resolution blocks image
-
-   IPU3 resolution change hardware blocks
-
-**Input Feeder**
-
-Input Feeder gets the Bayer frame data from the sensor, it can enable cropping
-of lines and columns from the frame and then store pixels into device's internal
-pixel buffer which are ready to readout by following blocks.
-
-**Bayer Down Scaler**
-
-Bayer Down Scaler is capable of performing image scaling in Bayer domain, the
-downscale factor can be configured from 1X to 1/4X in each axis with
-configuration steps of 0.03125 (1/32).
-
-**Geometric Distortion Correction**
-
-Geometric Distortion Correction is used to performe correction of distortions
-and image filtering. It needs some extra filter and envelop padding pixels to
-work, so the input resolution of GDC should be larger than the output
-resolution.
-
-**YUV Scaler**
-
-YUV Scaler which similar with BDS, but it is mainly do image down scaling in
-YUV domain, it can support up to 1/12X down scaling, but it can not be applied
-to the main output.
-
-The ImgU V4L2 subdev has to be configured with the supported resolutions in all
-the above hardware blocks, for a given input resolution.
-For a given supported resolution for an input frame, the Input Feeder, Bayer
-Down Scaler and GDC blocks should be configured with the supported resolutions
-as each hardware block has its own alignment requirement.
-
-You must configure the output resolution of the hardware blocks smartly to meet
-the hardware requirement along with keeping the maximum field of view. The
-intermediate resolutions can be generated by specific tool -
-
-https://github.com/intel/intel-ipu3-pipecfg
-
-This tool can be used to generate intermediate resolutions. More information can
-be obtained by looking at the following IPU3 ImgU configuration table.
-
-https://chromium.googlesource.com/chromiumos/overlays/board-overlays/+/master
-
-Under baseboard-poppy/media-libs/cros-camera-hal-configs-poppy/files/gcss
-directory, graph_settings_ov5670.xml can be used as an example.
-
-The following steps prepare the ImgU pipeline for the image processing.
-
-1. The ImgU V4L2 subdev data format should be set by using the
-VIDIOC_SUBDEV_S_FMT on pad 0, using the GDC width and height obtained above.
-
-2. The ImgU V4L2 subdev cropping should be set by using the
-VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_CROP as the target,
-using the input feeder height and width.
-
-3. The ImgU V4L2 subdev composing should be set by using the
-VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_COMPOSE as the target,
-using the BDS height and width.
-
-For the ov5670 example, for an input frame with a resolution of 2592x1944
-(which is input to the ImgU subdev pad 0), the corresponding resolutions
-for input feeder, BDS and GDC are 2592x1944, 2592x1944 and 2560x1920
-respectively.
-
-Once this is done, the received raw Bayer frames can be input to the ImgU
-V4L2 subdev as below, using the open source application v4l2n [#f1]_.
-
-For an image captured with 2592x1944 [#f4]_ resolution, with desired output
-resolution as 2560x1920 and viewfinder resolution as 2560x1920, the following
-v4l2n command can be used. This helps process the raw Bayer frames and produces
-the desired results for the main output image and the viewfinder output, in NV12
-format.
-
-v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4
---fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069
---reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 --output=/tmp/frames.out
---open=/dev/video5
---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 --output=/tmp/frames.vf
---open=/dev/video6
---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7
---output=/tmp/frames.3A --fmt=type:META_CAPTURE,?
---reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5
-
-where /dev/video4, /dev/video5, /dev/video6 and /dev/video7 devices point to
-input, output, viewfinder and 3A statistics video nodes respectively.
-
-Converting the raw Bayer image into YUV domain
-----------------------------------------------
-
-The processed images after the above step, can be converted to YUV domain
-as below.
-
-Main output frames
-~~~~~~~~~~~~~~~~~~
-
-raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm
-
-where 2560x1920 is output resolution, NV12 is the video format, followed
-by input frame and output PNM file.
-
-Viewfinder output frames
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm
-
-where 2560x1920 is output resolution, NV12 is the video format, followed
-by input frame and output PNM file.
-
-Example user space code for IPU3
-================================
-
-User space code that configures and uses IPU3 is available here.
-
-https://chromium.googlesource.com/chromiumos/platform/arc-camera/+/master/
-
-The source can be located under hal/intel directory.
-
-Overview of IPU3 pipeline
-=========================
-
-IPU3 pipeline has a number of image processing stages, each of which takes a
-set of parameters as input. The major stages of pipelines are shown here:
-
-.. kernel-render:: DOT
-   :alt: IPU3 ImgU Pipeline
-   :caption: IPU3 ImgU Pipeline Diagram
-
-   digraph "IPU3 ImgU" {
-       node [shape=box]
-       splines="ortho"
-       rankdir="LR"
-
-       a [label="Raw pixels"]
-       b [label="Bayer Downscaling"]
-       c [label="Optical Black Correction"]
-       d [label="Linearization"]
-       e [label="Lens Shading Correction"]
-       f [label="White Balance / Exposure / Focus Apply"]
-       g [label="Bayer Noise Reduction"]
-       h [label="ANR"]
-       i [label="Demosaicing"]
-       j [label="Color Correction Matrix"]
-       k [label="Gamma correction"]
-       l [label="Color Space Conversion"]
-       m [label="Chroma Down Scaling"]
-       n [label="Chromatic Noise Reduction"]
-       o [label="Total Color Correction"]
-       p [label="XNR3"]
-       q [label="TNR"]
-       r [label="DDR"]
-
-       { rank=same; a -> b -> c -> d -> e -> f }
-       { rank=same; g -> h -> i -> j -> k -> l }
-       { rank=same; m -> n -> o -> p -> q -> r }
-
-       a -> g -> m [style=invis, weight=10]
-
-       f -> g
-       l -> m
-   }
-
-The table below presents a description of the above algorithms.
-
-======================== =======================================================
-Name			 Description
-======================== =======================================================
-Optical Black Correction Optical Black Correction block subtracts a pre-defined
-			 value from the respective pixel values to obtain better
-			 image quality.
-			 Defined in :c:type:`ipu3_uapi_obgrid_param`.
-Linearization		 This algo block uses linearization parameters to
-			 address non-linearity sensor effects. The Lookup table
-			 table is defined in
-			 :c:type:`ipu3_uapi_isp_lin_vmem_params`.
-SHD			 Lens shading correction is used to correct spatial
-			 non-uniformity of the pixel response due to optical
-			 lens shading. This is done by applying a different gain
-			 for each pixel. The gain, black level etc are
-			 configured in :c:type:`ipu3_uapi_shd_config_static`.
-BNR			 Bayer noise reduction block removes image noise by
-			 applying a bilateral filter.
-			 See :c:type:`ipu3_uapi_bnr_static_config` for details.
-ANR			 Advanced Noise Reduction is a block based algorithm
-			 that performs noise reduction in the Bayer domain. The
-			 convolution matrix etc can be found in
-			 :c:type:`ipu3_uapi_anr_config`.
-DM			 Demosaicing converts raw sensor data in Bayer format
-			 into RGB (Red, Green, Blue) presentation. Then add
-			 outputs of estimation of Y channel for following stream
-			 processing by Firmware. The struct is defined as
-			 :c:type:`ipu3_uapi_dm_config`.
-Color Correction	 Color Correction algo transforms sensor specific color
-			 space to the standard "sRGB" color space. This is done
-			 by applying 3x3 matrix defined in
-			 :c:type:`ipu3_uapi_ccm_mat_config`.
-Gamma correction	 Gamma correction :c:type:`ipu3_uapi_gamma_config` is a
-			 basic non-linear tone mapping correction that is
-			 applied per pixel for each pixel component.
-CSC			 Color space conversion transforms each pixel from the
-			 RGB primary presentation to YUV (Y: brightness,
-			 UV: Luminance) presentation. This is done by applying
-			 a 3x3 matrix defined in
-			 :c:type:`ipu3_uapi_csc_mat_config`
-CDS			 Chroma down sampling
-			 After the CSC is performed, the Chroma Down Sampling
-			 is applied for a UV plane down sampling by a factor
-			 of 2 in each direction for YUV 4:2:0 using a 4x2
-			 configurable filter :c:type:`ipu3_uapi_cds_params`.
-CHNR			 Chroma noise reduction
-			 This block processes only the chrominance pixels and
-			 performs noise reduction by cleaning the high
-			 frequency noise.
-			 See struct :c:type:`ipu3_uapi_yuvp1_chnr_config`.
-TCC			 Total color correction as defined in struct
-			 :c:type:`ipu3_uapi_yuvp2_tcc_static_config`.
-XNR3			 eXtreme Noise Reduction V3 is the third revision of
-			 noise reduction algorithm used to improve image
-			 quality. This removes the low frequency noise in the
-			 captured image. Two related structs are  being defined,
-			 :c:type:`ipu3_uapi_isp_xnr3_params` for ISP data memory
-			 and :c:type:`ipu3_uapi_isp_xnr3_vmem_params` for vector
-			 memory.
-TNR			 Temporal Noise Reduction block compares successive
-			 frames in time to remove anomalies / noise in pixel
-			 values. :c:type:`ipu3_uapi_isp_tnr3_vmem_params` and
-			 :c:type:`ipu3_uapi_isp_tnr3_params` are defined for ISP
-			 vector and data memory respectively.
-======================== =======================================================
-
-Other often encountered acronyms not listed in above table:
-
-	ACC
-		Accelerator cluster
-	AWB_FR
-		Auto white balance filter response statistics
-	BDS
-		Bayer downscaler parameters
-	CCM
-		Color correction matrix coefficients
-	IEFd
-		Image enhancement filter directed
-	Obgrid
-		Optical black level compensation
-	OSYS
-		Output system configuration
-	ROI
-		Region of interest
-	YDS
-		Y down sampling
-	YTM
-		Y-tone mapping
-
-A few stages of the pipeline will be executed by firmware running on the ISP
-processor, while many others will use a set of fixed hardware blocks also
-called accelerator cluster (ACC) to crunch pixel data and produce statistics.
-
-ACC parameters of individual algorithms, as defined by
-:c:type:`ipu3_uapi_acc_param`, can be chosen to be applied by the user
-space through struct :c:type:`ipu3_uapi_flags` embedded in
-:c:type:`ipu3_uapi_params` structure. For parameters that are configured as
-not enabled by the user space, the corresponding structs are ignored by the
-driver, in which case the existing configuration of the algorithm will be
-preserved.
-
-References
-==========
-
-.. [#f5] drivers/staging/media/ipu3/include/intel-ipu3.h
-
-.. [#f1] https://github.com/intel/nvt
-
-.. [#f2] http://git.ideasonboard.org/yavta.git
-
-.. [#f3] http://git.ideasonboard.org/?p=media-ctl.git;a=summary
-
-.. [#f4] ImgU limitation requires an additional 16x16 for all input resolutions
diff --git a/Documentation/media/v4l-drivers/ipu3_rcb.svg b/Documentation/media/v4l-drivers/ipu3_rcb.svg
deleted file mode 100644
index d878421b42a0..000000000000
--- a/Documentation/media/v4l-drivers/ipu3_rcb.svg
+++ /dev/null
@@ -1,331 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="774pt" height="152pt" viewBox="0 0 774 152" version="1.1">
-<defs>
-<g>
-<symbol overflow="visible" id="glyph0-0">
-<path style="stroke:none;" d="M 1 0 L 1 -15 L 9 -15 L 9 0 Z M 8 -1 L 8 -14 L 2 -14 L 2 -1 Z M 8 -1 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-1">
-<path style="stroke:none;" d="M 4.6875 -1.15625 C 5.519531 -1.15625 6.15625 -1.316406 6.59375 -1.640625 C 7.039062 -1.960938 7.265625 -2.441406 7.265625 -3.078125 C 7.265625 -3.460938 7.179688 -3.789062 7.015625 -4.0625 C 6.859375 -4.34375 6.644531 -4.582031 6.375 -4.78125 C 6.113281 -4.988281 5.816406 -5.171875 5.484375 -5.328125 C 5.148438 -5.484375 4.804688 -5.628906 4.453125 -5.765625 C 4.054688 -5.921875 3.675781 -6.097656 3.3125 -6.296875 C 2.945312 -6.492188 2.617188 -6.726562 2.328125 -7 C 2.046875 -7.269531 1.820312 -7.582031 1.65625 -7.9375 C 1.488281 -8.300781 1.40625 -8.726562 1.40625 -9.21875 C 1.40625 -10.300781 1.742188 -11.144531 2.421875 -11.75 C 3.097656 -12.351562 4.046875 -12.65625 5.265625 -12.65625 C 5.597656 -12.65625 5.925781 -12.628906 6.25 -12.578125 C 6.570312 -12.535156 6.875 -12.476562 7.15625 -12.40625 C 7.4375 -12.34375 7.6875 -12.265625 7.90625 -12.171875 C 8.125 -12.085938 8.300781 -12 8.4375 -11.90625 L 7.921875 -10.515625 C 7.648438 -10.679688 7.28125 -10.84375 6.8125 -11 C 6.351562 -11.15625 5.835938 -11.234375 5.265625 -11.234375 C 4.660156 -11.234375 4.140625 -11.082031 3.703125 -10.78125 C 3.265625 -10.488281 3.046875 -10.039062 3.046875 -9.4375 C 3.046875 -9.09375 3.109375 -8.800781 3.234375 -8.5625 C 3.359375 -8.320312 3.53125 -8.109375 3.75 -7.921875 C 3.96875 -7.742188 4.222656 -7.582031 4.515625 -7.4375 C 4.804688 -7.289062 5.128906 -7.144531 5.484375 -7 C 5.984375 -6.789062 6.441406 -6.578125 6.859375 -6.359375 C 7.285156 -6.148438 7.648438 -5.894531 7.953125 -5.59375 C 8.253906 -5.300781 8.488281 -4.953125 8.65625 -4.546875 C 8.820312 -4.148438 8.90625 -3.664062 8.90625 -3.09375 C 8.90625 -2.019531 8.539062 -1.191406 7.8125 -0.609375 C 7.082031 -0.0234375 6.039062 0.265625 4.6875 0.265625 C 4.238281 0.265625 3.820312 0.234375 3.4375 0.171875 C 3.050781 0.109375 2.707031 0.03125 2.40625 -0.0625 C 2.101562 -0.15625 1.835938 -0.25 1.609375 -0.34375 C 1.390625 -0.4375 1.21875 -0.519531 1.09375 -0.59375 L 1.59375 -1.953125 C 1.863281 -1.804688 2.257812 -1.632812 2.78125 -1.4375 C 3.300781 -1.25 3.9375 -1.15625 4.6875 -1.15625 Z M 4.6875 -1.15625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-2">
-<path style="stroke:none;" d="M 5.1875 -9.5 C 6.4375 -9.5 7.398438 -9.109375 8.078125 -8.328125 C 8.753906 -7.546875 9.09375 -6.363281 9.09375 -4.78125 L 9.09375 -4.203125 L 2.453125 -4.203125 C 2.523438 -3.242188 2.84375 -2.515625 3.40625 -2.015625 C 3.976562 -1.515625 4.773438 -1.265625 5.796875 -1.265625 C 6.390625 -1.265625 6.890625 -1.3125 7.296875 -1.40625 C 7.710938 -1.5 8.023438 -1.597656 8.234375 -1.703125 L 8.453125 -0.296875 C 8.253906 -0.191406 7.894531 -0.0820312 7.375 0.03125 C 6.851562 0.15625 6.269531 0.21875 5.625 0.21875 C 4.820312 0.21875 4.113281 0.0976562 3.5 -0.140625 C 2.894531 -0.390625 2.394531 -0.726562 2 -1.15625 C 1.601562 -1.582031 1.300781 -2.09375 1.09375 -2.6875 C 0.894531 -3.28125 0.796875 -3.925781 0.796875 -4.625 C 0.796875 -5.445312 0.921875 -6.164062 1.171875 -6.78125 C 1.429688 -7.394531 1.765625 -7.898438 2.171875 -8.296875 C 2.585938 -8.703125 3.054688 -9.003906 3.578125 -9.203125 C 4.097656 -9.398438 4.632812 -9.5 5.1875 -9.5 Z M 7.421875 -5.546875 C 7.421875 -6.328125 7.210938 -6.945312 6.796875 -7.40625 C 6.390625 -7.863281 5.84375 -8.09375 5.15625 -8.09375 C 4.769531 -8.09375 4.421875 -8.019531 4.109375 -7.875 C 3.796875 -7.726562 3.523438 -7.535156 3.296875 -7.296875 C 3.066406 -7.054688 2.882812 -6.78125 2.75 -6.46875 C 2.625 -6.164062 2.539062 -5.859375 2.5 -5.546875 Z M 7.421875 -5.546875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-3">
-<path style="stroke:none;" d="M 1.421875 -9.015625 C 2.015625 -9.160156 2.609375 -9.273438 3.203125 -9.359375 C 3.796875 -9.441406 4.351562 -9.484375 4.875 -9.484375 C 6.113281 -9.484375 7.050781 -9.160156 7.6875 -8.515625 C 8.320312 -7.878906 8.640625 -6.851562 8.640625 -5.4375 L 8.640625 0 L 7 0 L 7 -5.140625 C 7 -5.742188 6.945312 -6.226562 6.84375 -6.59375 C 6.738281 -6.96875 6.585938 -7.257812 6.390625 -7.46875 C 6.191406 -7.675781 5.957031 -7.816406 5.6875 -7.890625 C 5.414062 -7.972656 5.117188 -8.015625 4.796875 -8.015625 C 4.535156 -8.015625 4.253906 -8 3.953125 -7.96875 C 3.648438 -7.9375 3.359375 -7.894531 3.078125 -7.84375 L 3.078125 0 L 1.421875 0 Z M 1.421875 -9.015625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-4">
-<path style="stroke:none;" d="M 7.015625 -2.3125 C 7.015625 -2.644531 6.878906 -2.914062 6.609375 -3.125 C 6.335938 -3.34375 6 -3.53125 5.59375 -3.6875 C 5.1875 -3.851562 4.742188 -4.015625 4.265625 -4.171875 C 3.785156 -4.328125 3.335938 -4.515625 2.921875 -4.734375 C 2.515625 -4.960938 2.175781 -5.242188 1.90625 -5.578125 C 1.632812 -5.910156 1.5 -6.34375 1.5 -6.875 C 1.5 -7.625 1.800781 -8.25 2.40625 -8.75 C 3.007812 -9.25 3.960938 -9.5 5.265625 -9.5 C 5.765625 -9.5 6.285156 -9.460938 6.828125 -9.390625 C 7.367188 -9.316406 7.832031 -9.21875 8.21875 -9.09375 L 7.921875 -7.625 C 7.816406 -7.675781 7.671875 -7.726562 7.484375 -7.78125 C 7.296875 -7.84375 7.082031 -7.894531 6.84375 -7.9375 C 6.601562 -7.988281 6.34375 -8.023438 6.0625 -8.046875 C 5.789062 -8.078125 5.53125 -8.09375 5.28125 -8.09375 C 3.84375 -8.09375 3.125 -7.703125 3.125 -6.921875 C 3.125 -6.640625 3.257812 -6.398438 3.53125 -6.203125 C 3.800781 -6.015625 4.144531 -5.835938 4.5625 -5.671875 C 4.976562 -5.515625 5.425781 -5.351562 5.90625 -5.1875 C 6.382812 -5.019531 6.828125 -4.816406 7.234375 -4.578125 C 7.648438 -4.335938 7.992188 -4.046875 8.265625 -3.703125 C 8.546875 -3.367188 8.6875 -2.941406 8.6875 -2.421875 C 8.6875 -1.578125 8.359375 -0.925781 7.703125 -0.46875 C 7.046875 -0.0078125 6.007812 0.21875 4.59375 0.21875 C 3.957031 0.21875 3.375 0.164062 2.84375 0.0625 C 2.3125 -0.0390625 1.800781 -0.203125 1.3125 -0.421875 L 1.640625 -1.921875 C 2.109375 -1.703125 2.597656 -1.523438 3.109375 -1.390625 C 3.617188 -1.253906 4.171875 -1.1875 4.765625 -1.1875 C 6.265625 -1.1875 7.015625 -1.5625 7.015625 -2.3125 Z M 7.015625 -2.3125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-5">
-<path style="stroke:none;" d="M 9.203125 -4.640625 C 9.203125 -3.910156 9.097656 -3.25 8.890625 -2.65625 C 8.679688 -2.0625 8.390625 -1.550781 8.015625 -1.125 C 7.640625 -0.695312 7.191406 -0.363281 6.671875 -0.125 C 6.160156 0.101562 5.597656 0.21875 4.984375 0.21875 C 4.378906 0.21875 3.820312 0.101562 3.3125 -0.125 C 2.800781 -0.363281 2.359375 -0.695312 1.984375 -1.125 C 1.609375 -1.550781 1.316406 -2.0625 1.109375 -2.65625 C 0.898438 -3.25 0.796875 -3.910156 0.796875 -4.640625 C 0.796875 -5.367188 0.898438 -6.035156 1.109375 -6.640625 C 1.316406 -7.242188 1.609375 -7.753906 1.984375 -8.171875 C 2.359375 -8.585938 2.800781 -8.910156 3.3125 -9.140625 C 3.820312 -9.378906 4.378906 -9.5 4.984375 -9.5 C 5.597656 -9.5 6.160156 -9.378906 6.671875 -9.140625 C 7.191406 -8.910156 7.640625 -8.585938 8.015625 -8.171875 C 8.390625 -7.753906 8.679688 -7.242188 8.890625 -6.640625 C 9.097656 -6.035156 9.203125 -5.367188 9.203125 -4.640625 Z M 7.5 -4.640625 C 7.5 -5.691406 7.269531 -6.519531 6.8125 -7.125 C 6.363281 -7.738281 5.753906 -8.046875 4.984375 -8.046875 C 4.222656 -8.046875 3.617188 -7.738281 3.171875 -7.125 C 2.722656 -6.519531 2.5 -5.691406 2.5 -4.640625 C 2.5 -3.597656 2.722656 -2.773438 3.171875 -2.171875 C 3.617188 -1.566406 4.222656 -1.265625 4.984375 -1.265625 C 5.753906 -1.265625 6.363281 -1.566406 6.8125 -2.171875 C 7.269531 -2.773438 7.5 -3.597656 7.5 -4.640625 Z M 7.5 -4.640625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-6">
-<path style="stroke:none;" d="M 2.140625 0 L 2.140625 -8.78125 C 3.503906 -9.25 4.878906 -9.484375 6.265625 -9.484375 C 6.691406 -9.484375 7.097656 -9.460938 7.484375 -9.421875 C 7.867188 -9.390625 8.296875 -9.320312 8.765625 -9.21875 L 8.453125 -7.765625 C 8.023438 -7.878906 7.648438 -7.953125 7.328125 -7.984375 C 7.003906 -8.023438 6.648438 -8.046875 6.265625 -8.046875 C 5.453125 -8.046875 4.625 -7.929688 3.78125 -7.703125 L 3.78125 0 Z M 2.140625 0 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-7">
-<path style="stroke:none;" d="M 5.8125 -10.984375 L 5.8125 -1.40625 L 8.21875 -1.40625 L 8.21875 0 L 1.78125 0 L 1.78125 -1.40625 L 4.1875 -1.40625 L 4.1875 -10.984375 L 1.78125 -10.984375 L 1.78125 -12.375 L 8.21875 -12.375 L 8.21875 -10.984375 Z M 5.8125 -10.984375 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-8">
-<path style="stroke:none;" d="M 1.8125 0 L 1.8125 -12.375 L 8.84375 -12.375 L 8.84375 -10.984375 L 3.453125 -10.984375 L 3.453125 -7.125 L 8.203125 -7.125 L 8.203125 -5.734375 L 3.453125 -5.734375 L 3.453125 0 Z M 1.8125 0 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-9">
-<path style="stroke:none;" d="M 4.078125 0.09375 C 3.878906 0.09375 3.644531 0.0859375 3.375 0.078125 C 3.113281 0.0664062 2.847656 0.0507812 2.578125 0.03125 C 2.316406 0.0078125 2.050781 -0.0195312 1.78125 -0.0625 C 1.507812 -0.101562 1.273438 -0.148438 1.078125 -0.203125 L 1.078125 -12.203125 C 1.273438 -12.253906 1.503906 -12.300781 1.765625 -12.34375 C 2.023438 -12.382812 2.289062 -12.410156 2.5625 -12.421875 C 2.84375 -12.441406 3.113281 -12.457031 3.375 -12.46875 C 3.632812 -12.488281 3.867188 -12.5 4.078125 -12.5 C 4.691406 -12.5 5.265625 -12.445312 5.796875 -12.34375 C 6.328125 -12.238281 6.789062 -12.054688 7.1875 -11.796875 C 7.582031 -11.546875 7.890625 -11.210938 8.109375 -10.796875 C 8.328125 -10.390625 8.4375 -9.878906 8.4375 -9.265625 C 8.4375 -8.960938 8.390625 -8.675781 8.296875 -8.40625 C 8.203125 -8.132812 8.070312 -7.878906 7.90625 -7.640625 C 7.738281 -7.398438 7.546875 -7.1875 7.328125 -7 C 7.109375 -6.820312 6.875 -6.6875 6.625 -6.59375 C 7.300781 -6.40625 7.867188 -6.0625 8.328125 -5.5625 C 8.785156 -5.0625 9.015625 -4.414062 9.015625 -3.625 C 9.015625 -2.394531 8.617188 -1.46875 7.828125 -0.84375 C 7.046875 -0.21875 5.796875 0.09375 4.078125 0.09375 Z M 2.71875 -5.78125 L 2.71875 -1.359375 C 2.75 -1.347656 2.898438 -1.332031 3.171875 -1.3125 C 3.441406 -1.289062 3.785156 -1.28125 4.203125 -1.28125 C 4.609375 -1.28125 5 -1.3125 5.375 -1.375 C 5.757812 -1.445312 6.097656 -1.570312 6.390625 -1.75 C 6.691406 -1.925781 6.929688 -2.160156 7.109375 -2.453125 C 7.285156 -2.753906 7.375 -3.132812 7.375 -3.59375 C 7.375 -4.007812 7.289062 -4.359375 7.125 -4.640625 C 6.957031 -4.921875 6.738281 -5.144531 6.46875 -5.3125 C 6.195312 -5.476562 5.878906 -5.597656 5.515625 -5.671875 C 5.160156 -5.742188 4.789062 -5.78125 4.40625 -5.78125 Z M 2.71875 -7.140625 L 4.015625 -7.140625 C 4.347656 -7.140625 4.679688 -7.171875 5.015625 -7.234375 C 5.347656 -7.304688 5.644531 -7.414062 5.90625 -7.5625 C 6.175781 -7.707031 6.390625 -7.90625 6.546875 -8.15625 C 6.710938 -8.414062 6.796875 -8.738281 6.796875 -9.125 C 6.796875 -9.476562 6.722656 -9.78125 6.578125 -10.03125 C 6.429688 -10.289062 6.238281 -10.5 6 -10.65625 C 5.757812 -10.820312 5.484375 -10.9375 5.171875 -11 C 4.859375 -11.0625 4.53125 -11.09375 4.1875 -11.09375 C 3.832031 -11.09375 3.523438 -11.085938 3.265625 -11.078125 C 3.003906 -11.078125 2.820312 -11.066406 2.71875 -11.046875 Z M 2.71875 -7.140625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-10">
-<path style="stroke:none;" d="M 9.203125 -6.203125 C 9.203125 -5.054688 9.054688 -4.082031 8.765625 -3.28125 C 8.484375 -2.476562 8.09375 -1.828125 7.59375 -1.328125 C 7.09375 -0.828125 6.5 -0.460938 5.8125 -0.234375 C 5.125 -0.015625 4.378906 0.09375 3.578125 0.09375 C 2.753906 0.09375 1.921875 -0.00390625 1.078125 -0.203125 L 1.078125 -12.203125 C 1.921875 -12.398438 2.753906 -12.5 3.578125 -12.5 C 4.378906 -12.5 5.125 -12.382812 5.8125 -12.15625 C 6.5 -11.925781 7.09375 -11.554688 7.59375 -11.046875 C 8.09375 -10.546875 8.484375 -9.894531 8.765625 -9.09375 C 9.054688 -8.300781 9.203125 -7.335938 9.203125 -6.203125 Z M 2.71875 -1.375 C 3.050781 -1.332031 3.390625 -1.3125 3.734375 -1.3125 C 4.335938 -1.3125 4.875 -1.398438 5.34375 -1.578125 C 5.8125 -1.765625 6.203125 -2.054688 6.515625 -2.453125 C 6.835938 -2.847656 7.082031 -3.351562 7.25 -3.96875 C 7.425781 -4.59375 7.515625 -5.335938 7.515625 -6.203125 C 7.515625 -7.878906 7.191406 -9.109375 6.546875 -9.890625 C 5.898438 -10.679688 4.945312 -11.078125 3.6875 -11.078125 C 3.507812 -11.078125 3.335938 -11.070312 3.171875 -11.0625 C 3.003906 -11.0625 2.851562 -11.046875 2.71875 -11.015625 Z M 2.71875 -1.375 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-11">
-<path style="stroke:none;" d="M 7.453125 -6.09375 L 9.09375 -6.09375 L 9.09375 -0.296875 C 8.84375 -0.203125 8.4375 -0.0859375 7.875 0.046875 C 7.320312 0.191406 6.664062 0.265625 5.90625 0.265625 C 5.15625 0.265625 4.472656 0.125 3.859375 -0.15625 C 3.242188 -0.445312 2.71875 -0.863281 2.28125 -1.40625 C 1.851562 -1.957031 1.519531 -2.632812 1.28125 -3.4375 C 1.039062 -4.25 0.921875 -5.171875 0.921875 -6.203125 C 0.921875 -7.242188 1.050781 -8.160156 1.3125 -8.953125 C 1.582031 -9.753906 1.945312 -10.425781 2.40625 -10.96875 C 2.863281 -11.519531 3.398438 -11.9375 4.015625 -12.21875 C 4.628906 -12.507812 5.289062 -12.65625 6 -12.65625 C 6.457031 -12.65625 6.859375 -12.617188 7.203125 -12.546875 C 7.546875 -12.484375 7.835938 -12.40625 8.078125 -12.3125 C 8.328125 -12.226562 8.53125 -12.132812 8.6875 -12.03125 C 8.851562 -11.925781 8.976562 -11.847656 9.0625 -11.796875 L 8.515625 -10.421875 C 8.210938 -10.660156 7.847656 -10.851562 7.421875 -11 C 7.003906 -11.15625 6.5625 -11.234375 6.09375 -11.234375 C 5.59375 -11.234375 5.125 -11.113281 4.6875 -10.875 C 4.257812 -10.632812 3.890625 -10.296875 3.578125 -9.859375 C 3.273438 -9.421875 3.035156 -8.890625 2.859375 -8.265625 C 2.679688 -7.648438 2.59375 -6.960938 2.59375 -6.203125 C 2.59375 -5.453125 2.671875 -4.769531 2.828125 -4.15625 C 2.984375 -3.539062 3.207031 -3.015625 3.5 -2.578125 C 3.789062 -2.140625 4.148438 -1.796875 4.578125 -1.546875 C 5.015625 -1.304688 5.515625 -1.1875 6.078125 -1.1875 C 6.460938 -1.1875 6.757812 -1.210938 6.96875 -1.265625 C 7.1875 -1.316406 7.347656 -1.367188 7.453125 -1.421875 Z M 7.453125 -6.09375 "/>
-</symbol>
-<symbol overflow="visible" id="glyph0-12">
-<path style="stroke:none;" d="M 9.203125 -0.515625 C 8.734375 -0.253906 8.234375 -0.0625 7.703125 0.0625 C 7.179688 0.195312 6.617188 0.265625 6.015625 0.265625 C 5.285156 0.265625 4.609375 0.132812 3.984375 -0.125 C 3.367188 -0.382812 2.832031 -0.773438 2.375 -1.296875 C 1.925781 -1.828125 1.570312 -2.5 1.3125 -3.3125 C 1.050781 -4.132812 0.921875 -5.097656 0.921875 -6.203125 C 0.921875 -7.253906 1.054688 -8.179688 1.328125 -8.984375 C 1.597656 -9.785156 1.96875 -10.457031 2.4375 -11 C 2.90625 -11.539062 3.453125 -11.953125 4.078125 -12.234375 C 4.703125 -12.515625 5.367188 -12.65625 6.078125 -12.65625 C 6.566406 -12.65625 7.066406 -12.585938 7.578125 -12.453125 C 8.097656 -12.328125 8.601562 -12.109375 9.09375 -11.796875 L 8.625 -10.4375 C 7.738281 -10.945312 6.910156 -11.203125 6.140625 -11.203125 C 5.585938 -11.203125 5.09375 -11.082031 4.65625 -10.84375 C 4.226562 -10.613281 3.859375 -10.28125 3.546875 -9.84375 C 3.242188 -9.40625 3.007812 -8.878906 2.84375 -8.265625 C 2.675781 -7.648438 2.59375 -6.960938 2.59375 -6.203125 C 2.59375 -5.347656 2.679688 -4.609375 2.859375 -3.984375 C 3.046875 -3.359375 3.296875 -2.835938 3.609375 -2.421875 C 3.929688 -2.003906 4.316406 -1.695312 4.765625 -1.5 C 5.210938 -1.300781 5.695312 -1.203125 6.21875 -1.203125 C 6.601562 -1.203125 7.007812 -1.25 7.4375 -1.34375 C 7.863281 -1.445312 8.304688 -1.625 8.765625 -1.875 Z M 9.203125 -0.515625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-0">
-<path style="stroke:none;" d="M 0.59375 0 L 0.59375 -9 L 5.40625 -9 L 5.40625 0 Z M 4.796875 -0.59375 L 4.796875 -8.40625 L 1.203125 -8.40625 L 1.203125 -0.59375 Z M 4.796875 -0.59375 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-1">
-<path style="stroke:none;" d="M 2.515625 0 L 2.515625 -2.765625 C 2.023438 -3.554688 1.582031 -4.332031 1.1875 -5.09375 C 0.789062 -5.851562 0.445312 -6.628906 0.15625 -7.421875 L 1.265625 -7.421875 C 1.492188 -6.753906 1.757812 -6.113281 2.0625 -5.5 C 2.363281 -4.882812 2.6875 -4.253906 3.03125 -3.609375 C 3.394531 -4.285156 3.71875 -4.929688 4 -5.546875 C 4.28125 -6.160156 4.539062 -6.785156 4.78125 -7.421875 L 5.859375 -7.421875 C 5.554688 -6.640625 5.207031 -5.875 4.8125 -5.125 C 4.414062 -4.382812 3.976562 -3.601562 3.5 -2.78125 L 3.5 0 Z M 2.515625 0 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-2">
-<path style="stroke:none;" d="M 3 0.15625 C 2.5625 0.15625 2.1875 0.09375 1.875 -0.03125 C 1.570312 -0.164062 1.320312 -0.347656 1.125 -0.578125 C 0.9375 -0.804688 0.796875 -1.085938 0.703125 -1.421875 C 0.617188 -1.765625 0.578125 -2.144531 0.578125 -2.5625 L 0.578125 -7.421875 L 1.5625 -7.421875 L 1.5625 -2.65625 C 1.5625 -2.28125 1.59375 -1.96875 1.65625 -1.71875 C 1.726562 -1.46875 1.828125 -1.265625 1.953125 -1.109375 C 2.078125 -0.960938 2.222656 -0.859375 2.390625 -0.796875 C 2.566406 -0.734375 2.769531 -0.703125 3 -0.703125 C 3.226562 -0.703125 3.425781 -0.734375 3.59375 -0.796875 C 3.769531 -0.859375 3.921875 -0.960938 4.046875 -1.109375 C 4.171875 -1.265625 4.265625 -1.46875 4.328125 -1.71875 C 4.398438 -1.96875 4.4375 -2.28125 4.4375 -2.65625 L 4.4375 -7.421875 L 5.421875 -7.421875 L 5.421875 -2.5625 C 5.421875 -2.144531 5.375 -1.765625 5.28125 -1.421875 C 5.195312 -1.085938 5.054688 -0.804688 4.859375 -0.578125 C 4.671875 -0.347656 4.421875 -0.164062 4.109375 -0.03125 C 3.804688 0.09375 3.4375 0.15625 3 0.15625 Z M 3 0.15625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-3">
-<path style="stroke:none;" d="M 1.21875 -7.421875 C 1.320312 -6.921875 1.445312 -6.375 1.59375 -5.78125 C 1.738281 -5.1875 1.890625 -4.585938 2.046875 -3.984375 C 2.210938 -3.390625 2.378906 -2.820312 2.546875 -2.28125 C 2.722656 -1.738281 2.882812 -1.265625 3.03125 -0.859375 C 3.15625 -1.265625 3.300781 -1.742188 3.46875 -2.296875 C 3.644531 -2.847656 3.816406 -3.421875 3.984375 -4.015625 C 4.148438 -4.609375 4.304688 -5.203125 4.453125 -5.796875 C 4.609375 -6.390625 4.734375 -6.929688 4.828125 -7.421875 L 5.859375 -7.421875 C 5.796875 -7.109375 5.691406 -6.679688 5.546875 -6.140625 C 5.398438 -5.597656 5.226562 -4.992188 5.03125 -4.328125 C 4.832031 -3.660156 4.609375 -2.953125 4.359375 -2.203125 C 4.117188 -1.453125 3.863281 -0.71875 3.59375 0 L 2.375 0 C 2.125 -0.71875 1.878906 -1.445312 1.640625 -2.1875 C 1.410156 -2.9375 1.195312 -3.644531 1 -4.3125 C 0.800781 -4.976562 0.628906 -5.582031 0.484375 -6.125 C 0.335938 -6.675781 0.226562 -7.109375 0.15625 -7.421875 Z M 1.21875 -7.421875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-4">
-<path style="stroke:none;" d=""/>
-</symbol>
-<symbol overflow="visible" id="glyph1-5">
-<path style="stroke:none;" d="M 5.515625 -3.71875 C 5.515625 -3.03125 5.425781 -2.445312 5.25 -1.96875 C 5.082031 -1.488281 4.847656 -1.097656 4.546875 -0.796875 C 4.253906 -0.492188 3.898438 -0.273438 3.484375 -0.140625 C 3.078125 -0.00390625 2.628906 0.0625 2.140625 0.0625 C 1.648438 0.0625 1.148438 0 0.640625 -0.125 L 0.640625 -7.3125 C 1.148438 -7.4375 1.648438 -7.5 2.140625 -7.5 C 2.628906 -7.5 3.078125 -7.429688 3.484375 -7.296875 C 3.898438 -7.160156 4.253906 -6.941406 4.546875 -6.640625 C 4.847656 -6.335938 5.082031 -5.941406 5.25 -5.453125 C 5.425781 -4.972656 5.515625 -4.394531 5.515625 -3.71875 Z M 1.625 -0.828125 C 1.832031 -0.804688 2.039062 -0.796875 2.25 -0.796875 C 2.601562 -0.796875 2.921875 -0.847656 3.203125 -0.953125 C 3.484375 -1.054688 3.71875 -1.226562 3.90625 -1.46875 C 4.101562 -1.707031 4.253906 -2.007812 4.359375 -2.375 C 4.460938 -2.75 4.515625 -3.195312 4.515625 -3.71875 C 4.515625 -4.726562 4.316406 -5.46875 3.921875 -5.9375 C 3.535156 -6.40625 2.960938 -6.640625 2.203125 -6.640625 C 2.097656 -6.640625 1.992188 -6.640625 1.890625 -6.640625 C 1.796875 -6.640625 1.707031 -6.628906 1.625 -6.609375 Z M 1.625 -0.828125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-6">
-<path style="stroke:none;" d="M 5.515625 -2.78125 C 5.515625 -2.34375 5.453125 -1.945312 5.328125 -1.59375 C 5.203125 -1.238281 5.023438 -0.929688 4.796875 -0.671875 C 4.578125 -0.410156 4.3125 -0.210938 4 -0.078125 C 3.695312 0.0546875 3.359375 0.125 2.984375 0.125 C 2.628906 0.125 2.296875 0.0546875 1.984375 -0.078125 C 1.679688 -0.210938 1.414062 -0.410156 1.1875 -0.671875 C 0.96875 -0.929688 0.796875 -1.238281 0.671875 -1.59375 C 0.546875 -1.945312 0.484375 -2.34375 0.484375 -2.78125 C 0.484375 -3.21875 0.546875 -3.617188 0.671875 -3.984375 C 0.796875 -4.347656 0.96875 -4.65625 1.1875 -4.90625 C 1.414062 -5.15625 1.679688 -5.347656 1.984375 -5.484375 C 2.296875 -5.628906 2.628906 -5.703125 2.984375 -5.703125 C 3.359375 -5.703125 3.695312 -5.628906 4 -5.484375 C 4.3125 -5.347656 4.578125 -5.15625 4.796875 -4.90625 C 5.023438 -4.65625 5.203125 -4.347656 5.328125 -3.984375 C 5.453125 -3.617188 5.515625 -3.21875 5.515625 -2.78125 Z M 4.5 -2.78125 C 4.5 -3.414062 4.363281 -3.914062 4.09375 -4.28125 C 3.820312 -4.644531 3.453125 -4.828125 2.984375 -4.828125 C 2.523438 -4.828125 2.160156 -4.644531 1.890625 -4.28125 C 1.628906 -3.914062 1.5 -3.414062 1.5 -2.78125 C 1.5 -2.15625 1.628906 -1.660156 1.890625 -1.296875 C 2.160156 -0.929688 2.523438 -0.75 2.984375 -0.75 C 3.453125 -0.75 3.820312 -0.929688 4.09375 -1.296875 C 4.363281 -1.660156 4.5 -2.15625 4.5 -2.78125 Z M 4.5 -2.78125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-7">
-<path style="stroke:none;" d="M 4.109375 0 C 3.992188 -0.269531 3.890625 -0.515625 3.796875 -0.734375 C 3.710938 -0.960938 3.628906 -1.1875 3.546875 -1.40625 C 3.460938 -1.632812 3.378906 -1.867188 3.296875 -2.109375 C 3.210938 -2.359375 3.113281 -2.640625 3 -2.953125 C 2.882812 -2.640625 2.78125 -2.359375 2.6875 -2.109375 C 2.601562 -1.867188 2.519531 -1.632812 2.4375 -1.40625 C 2.351562 -1.1875 2.265625 -0.960938 2.171875 -0.734375 C 2.085938 -0.515625 1.984375 -0.269531 1.859375 0 L 1.109375 0 C 0.890625 -0.976562 0.707031 -1.953125 0.5625 -2.921875 C 0.414062 -3.890625 0.304688 -4.769531 0.234375 -5.5625 L 1.15625 -5.5625 C 1.1875 -5.25 1.210938 -4.941406 1.234375 -4.640625 C 1.265625 -4.347656 1.300781 -4.035156 1.34375 -3.703125 C 1.382812 -3.378906 1.429688 -3.023438 1.484375 -2.640625 C 1.535156 -2.253906 1.59375 -1.820312 1.65625 -1.34375 C 1.78125 -1.664062 1.882812 -1.945312 1.96875 -2.1875 C 2.0625 -2.425781 2.144531 -2.648438 2.21875 -2.859375 C 2.289062 -3.078125 2.359375 -3.296875 2.421875 -3.515625 C 2.492188 -3.742188 2.570312 -4 2.65625 -4.28125 L 3.390625 -4.28125 C 3.472656 -4 3.546875 -3.742188 3.609375 -3.515625 C 3.671875 -3.296875 3.738281 -3.078125 3.8125 -2.859375 C 3.882812 -2.648438 3.957031 -2.425781 4.03125 -2.1875 C 4.113281 -1.945312 4.21875 -1.671875 4.34375 -1.359375 C 4.414062 -1.796875 4.476562 -2.203125 4.53125 -2.578125 C 4.59375 -2.953125 4.640625 -3.304688 4.671875 -3.640625 C 4.710938 -3.972656 4.75 -4.296875 4.78125 -4.609375 C 4.820312 -4.921875 4.851562 -5.238281 4.875 -5.5625 L 5.765625 -5.5625 C 5.734375 -5.164062 5.6875 -4.738281 5.625 -4.28125 C 5.570312 -3.820312 5.503906 -3.351562 5.421875 -2.875 C 5.335938 -2.394531 5.25 -1.910156 5.15625 -1.421875 C 5.0625 -0.929688 4.960938 -0.457031 4.859375 0 Z M 4.109375 0 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-8">
-<path style="stroke:none;" d="M 0.859375 -5.40625 C 1.210938 -5.5 1.566406 -5.566406 1.921875 -5.609375 C 2.273438 -5.660156 2.609375 -5.6875 2.921875 -5.6875 C 3.671875 -5.6875 4.234375 -5.492188 4.609375 -5.109375 C 4.992188 -4.722656 5.1875 -4.109375 5.1875 -3.265625 L 5.1875 0 L 4.203125 0 L 4.203125 -3.078125 C 4.203125 -3.441406 4.171875 -3.734375 4.109375 -3.953125 C 4.046875 -4.179688 3.953125 -4.359375 3.828125 -4.484375 C 3.710938 -4.609375 3.570312 -4.691406 3.40625 -4.734375 C 3.25 -4.785156 3.070312 -4.8125 2.875 -4.8125 C 2.71875 -4.8125 2.546875 -4.800781 2.359375 -4.78125 C 2.179688 -4.757812 2.007812 -4.734375 1.84375 -4.703125 L 1.84375 0 L 0.859375 0 Z M 0.859375 -5.40625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-9">
-<path style="stroke:none;" d="M 4.21875 -1.390625 C 4.21875 -1.585938 4.132812 -1.75 3.96875 -1.875 C 3.800781 -2.007812 3.59375 -2.125 3.34375 -2.21875 C 3.101562 -2.3125 2.835938 -2.40625 2.546875 -2.5 C 2.265625 -2.59375 2 -2.707031 1.75 -2.84375 C 1.507812 -2.976562 1.304688 -3.144531 1.140625 -3.34375 C 0.984375 -3.539062 0.90625 -3.800781 0.90625 -4.125 C 0.90625 -4.570312 1.082031 -4.945312 1.4375 -5.25 C 1.800781 -5.550781 2.375 -5.703125 3.15625 -5.703125 C 3.457031 -5.703125 3.769531 -5.675781 4.09375 -5.625 C 4.414062 -5.582031 4.695312 -5.523438 4.9375 -5.453125 L 4.75 -4.578125 C 4.6875 -4.609375 4.597656 -4.640625 4.484375 -4.671875 C 4.367188 -4.710938 4.238281 -4.742188 4.09375 -4.765625 C 3.957031 -4.796875 3.804688 -4.816406 3.640625 -4.828125 C 3.472656 -4.847656 3.316406 -4.859375 3.171875 -4.859375 C 2.304688 -4.859375 1.875 -4.625 1.875 -4.15625 C 1.875 -3.988281 1.953125 -3.84375 2.109375 -3.71875 C 2.273438 -3.601562 2.484375 -3.5 2.734375 -3.40625 C 2.984375 -3.3125 3.25 -3.210938 3.53125 -3.109375 C 3.820312 -3.015625 4.09375 -2.894531 4.34375 -2.75 C 4.59375 -2.601562 4.796875 -2.425781 4.953125 -2.21875 C 5.117188 -2.019531 5.203125 -1.765625 5.203125 -1.453125 C 5.203125 -0.953125 5.003906 -0.5625 4.609375 -0.28125 C 4.222656 -0.0078125 3.609375 0.125 2.765625 0.125 C 2.378906 0.125 2.023438 0.09375 1.703125 0.03125 C 1.378906 -0.03125 1.078125 -0.125 0.796875 -0.25 L 0.984375 -1.15625 C 1.265625 -1.019531 1.554688 -0.910156 1.859375 -0.828125 C 2.171875 -0.742188 2.503906 -0.703125 2.859375 -0.703125 C 3.765625 -0.703125 4.21875 -0.929688 4.21875 -1.390625 Z M 4.21875 -1.390625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-10">
-<path style="stroke:none;" d="M 0.59375 -2.765625 C 0.59375 -3.273438 0.671875 -3.710938 0.828125 -4.078125 C 0.984375 -4.441406 1.203125 -4.742188 1.484375 -4.984375 C 1.765625 -5.234375 2.09375 -5.414062 2.46875 -5.53125 C 2.84375 -5.644531 3.238281 -5.703125 3.65625 -5.703125 C 3.925781 -5.703125 4.195312 -5.679688 4.46875 -5.640625 C 4.738281 -5.609375 5.023438 -5.546875 5.328125 -5.453125 L 5.09375 -4.59375 C 4.832031 -4.6875 4.59375 -4.75 4.375 -4.78125 C 4.15625 -4.8125 3.929688 -4.828125 3.703125 -4.828125 C 3.421875 -4.828125 3.148438 -4.785156 2.890625 -4.703125 C 2.640625 -4.628906 2.414062 -4.507812 2.21875 -4.34375 C 2.03125 -4.1875 1.878906 -3.976562 1.765625 -3.71875 C 1.660156 -3.457031 1.609375 -3.140625 1.609375 -2.765625 C 1.609375 -2.421875 1.660156 -2.117188 1.765625 -1.859375 C 1.867188 -1.609375 2.015625 -1.398438 2.203125 -1.234375 C 2.390625 -1.078125 2.613281 -0.957031 2.875 -0.875 C 3.144531 -0.789062 3.4375 -0.75 3.75 -0.75 C 4.007812 -0.75 4.253906 -0.765625 4.484375 -0.796875 C 4.722656 -0.828125 4.984375 -0.890625 5.265625 -0.984375 L 5.40625 -0.15625 C 5.125 -0.0507812 4.835938 0.0195312 4.546875 0.0625 C 4.265625 0.101562 3.957031 0.125 3.625 0.125 C 3.175781 0.125 2.765625 0.0664062 2.390625 -0.046875 C 2.023438 -0.171875 1.707031 -0.351562 1.4375 -0.59375 C 1.164062 -0.832031 0.957031 -1.132812 0.8125 -1.5 C 0.664062 -1.863281 0.59375 -2.285156 0.59375 -2.765625 Z M 0.59375 -2.765625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-11">
-<path style="stroke:none;" d="M 3.0625 -0.703125 C 3.3125 -0.703125 3.53125 -0.707031 3.71875 -0.71875 C 3.914062 -0.738281 4.082031 -0.765625 4.21875 -0.796875 L 4.21875 -2.453125 C 4.082031 -2.492188 3.925781 -2.523438 3.75 -2.546875 C 3.570312 -2.566406 3.382812 -2.578125 3.1875 -2.578125 C 3 -2.578125 2.816406 -2.5625 2.640625 -2.53125 C 2.460938 -2.507812 2.304688 -2.460938 2.171875 -2.390625 C 2.035156 -2.316406 1.921875 -2.222656 1.828125 -2.109375 C 1.742188 -1.992188 1.703125 -1.847656 1.703125 -1.671875 C 1.703125 -1.304688 1.820312 -1.050781 2.0625 -0.90625 C 2.3125 -0.769531 2.644531 -0.703125 3.0625 -0.703125 Z M 2.96875 -5.703125 C 3.382812 -5.703125 3.734375 -5.648438 4.015625 -5.546875 C 4.296875 -5.441406 4.523438 -5.296875 4.703125 -5.109375 C 4.878906 -4.929688 5.003906 -4.707031 5.078125 -4.4375 C 5.148438 -4.175781 5.1875 -3.890625 5.1875 -3.578125 L 5.1875 -0.09375 C 4.957031 -0.0507812 4.648438 -0.00390625 4.265625 0.046875 C 3.890625 0.0976562 3.5 0.125 3.09375 0.125 C 2.789062 0.125 2.492188 0.0976562 2.203125 0.046875 C 1.921875 -0.00390625 1.664062 -0.09375 1.4375 -0.21875 C 1.21875 -0.351562 1.039062 -0.535156 0.90625 -0.765625 C 0.769531 -0.992188 0.703125 -1.289062 0.703125 -1.65625 C 0.703125 -1.976562 0.769531 -2.25 0.90625 -2.46875 C 1.039062 -2.6875 1.21875 -2.863281 1.4375 -3 C 1.664062 -3.132812 1.921875 -3.234375 2.203125 -3.296875 C 2.484375 -3.359375 2.769531 -3.390625 3.0625 -3.390625 C 3.445312 -3.390625 3.832031 -3.34375 4.21875 -3.25 L 4.21875 -3.53125 C 4.21875 -3.695312 4.195312 -3.859375 4.15625 -4.015625 C 4.125 -4.171875 4.054688 -4.3125 3.953125 -4.4375 C 3.847656 -4.5625 3.707031 -4.660156 3.53125 -4.734375 C 3.363281 -4.816406 3.144531 -4.859375 2.875 -4.859375 C 2.53125 -4.859375 2.226562 -4.832031 1.96875 -4.78125 C 1.71875 -4.738281 1.523438 -4.691406 1.390625 -4.640625 L 1.265625 -5.453125 C 1.398438 -5.523438 1.625 -5.582031 1.9375 -5.625 C 2.257812 -5.675781 2.601562 -5.703125 2.96875 -5.703125 Z M 2.96875 -5.703125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-12">
-<path style="stroke:none;" d="M 4.0625 0.125 C 3.707031 0.125 3.410156 0.078125 3.171875 -0.015625 C 2.941406 -0.109375 2.757812 -0.25 2.625 -0.4375 C 2.488281 -0.632812 2.390625 -0.875 2.328125 -1.15625 C 2.273438 -1.4375 2.25 -1.765625 2.25 -2.140625 L 2.25 -7.421875 L 0.640625 -7.421875 L 0.640625 -8.25 L 3.234375 -8.25 L 3.234375 -2.140625 C 3.234375 -1.867188 3.25 -1.644531 3.28125 -1.46875 C 3.320312 -1.289062 3.378906 -1.144531 3.453125 -1.03125 C 3.535156 -0.925781 3.628906 -0.851562 3.734375 -0.8125 C 3.847656 -0.769531 3.984375 -0.75 4.140625 -0.75 C 4.367188 -0.75 4.582031 -0.773438 4.78125 -0.828125 C 4.988281 -0.890625 5.144531 -0.953125 5.25 -1.015625 L 5.40625 -0.1875 C 5.351562 -0.15625 5.28125 -0.117188 5.1875 -0.078125 C 5.101562 -0.046875 5 -0.015625 4.875 0.015625 C 4.757812 0.046875 4.628906 0.0703125 4.484375 0.09375 C 4.347656 0.113281 4.207031 0.125 4.0625 0.125 Z M 4.0625 0.125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-13">
-<path style="stroke:none;" d="M 2.515625 -6.4375 C 2.304688 -6.4375 2.125 -6.503906 1.96875 -6.640625 C 1.8125 -6.785156 1.734375 -6.984375 1.734375 -7.234375 C 1.734375 -7.484375 1.8125 -7.679688 1.96875 -7.828125 C 2.125 -7.972656 2.304688 -8.046875 2.515625 -8.046875 C 2.722656 -8.046875 2.898438 -7.972656 3.046875 -7.828125 C 3.203125 -7.679688 3.28125 -7.484375 3.28125 -7.234375 C 3.28125 -6.984375 3.203125 -6.785156 3.046875 -6.640625 C 2.898438 -6.503906 2.722656 -6.4375 2.515625 -6.4375 Z M 2.25 -4.734375 L 0.640625 -4.734375 L 0.640625 -5.5625 L 3.234375 -5.5625 L 3.234375 -2.140625 C 3.234375 -1.585938 3.3125 -1.21875 3.46875 -1.03125 C 3.625 -0.84375 3.851562 -0.75 4.15625 -0.75 C 4.382812 -0.75 4.597656 -0.773438 4.796875 -0.828125 C 4.992188 -0.890625 5.144531 -0.953125 5.25 -1.015625 L 5.40625 -0.1875 C 5.351562 -0.15625 5.28125 -0.117188 5.1875 -0.078125 C 5.101562 -0.046875 5.003906 -0.015625 4.890625 0.015625 C 4.773438 0.046875 4.644531 0.0703125 4.5 0.09375 C 4.363281 0.113281 4.21875 0.125 4.0625 0.125 C 3.71875 0.125 3.425781 0.078125 3.1875 -0.015625 C 2.957031 -0.109375 2.769531 -0.25 2.625 -0.4375 C 2.488281 -0.632812 2.390625 -0.875 2.328125 -1.15625 C 2.273438 -1.4375 2.25 -1.765625 2.25 -2.140625 Z M 2.25 -4.734375 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-14">
-<path style="stroke:none;" d="M 4.15625 -0.515625 C 4.039062 -0.453125 3.863281 -0.382812 3.625 -0.3125 C 3.394531 -0.238281 3.128906 -0.203125 2.828125 -0.203125 C 2.503906 -0.203125 2.195312 -0.253906 1.90625 -0.359375 C 1.625 -0.472656 1.378906 -0.640625 1.171875 -0.859375 C 0.960938 -1.078125 0.796875 -1.351562 0.671875 -1.6875 C 0.546875 -2.03125 0.484375 -2.4375 0.484375 -2.90625 C 0.484375 -3.3125 0.539062 -3.679688 0.65625 -4.015625 C 0.769531 -4.359375 0.9375 -4.65625 1.15625 -4.90625 C 1.375 -5.15625 1.644531 -5.347656 1.96875 -5.484375 C 2.289062 -5.628906 2.65625 -5.703125 3.0625 -5.703125 C 3.539062 -5.703125 3.945312 -5.664062 4.28125 -5.59375 C 4.625 -5.53125 4.910156 -5.46875 5.140625 -5.40625 L 5.140625 -0.4375 C 5.140625 0.425781 4.921875 1.050781 4.484375 1.4375 C 4.054688 1.820312 3.398438 2.015625 2.515625 2.015625 C 2.160156 2.015625 1.835938 1.984375 1.546875 1.921875 C 1.253906 1.867188 0.992188 1.804688 0.765625 1.734375 L 0.953125 0.859375 C 1.160156 0.941406 1.394531 1.007812 1.65625 1.0625 C 1.925781 1.125 2.222656 1.15625 2.546875 1.15625 C 3.117188 1.15625 3.53125 1.035156 3.78125 0.796875 C 4.03125 0.566406 4.15625 0.191406 4.15625 -0.328125 Z M 4.15625 -4.6875 C 4.0625 -4.71875 3.925781 -4.75 3.75 -4.78125 C 3.582031 -4.8125 3.359375 -4.828125 3.078125 -4.828125 C 2.554688 -4.828125 2.160156 -4.648438 1.890625 -4.296875 C 1.628906 -3.941406 1.5 -3.472656 1.5 -2.890625 C 1.5 -2.566406 1.535156 -2.289062 1.609375 -2.0625 C 1.691406 -1.84375 1.796875 -1.65625 1.921875 -1.5 C 2.054688 -1.351562 2.207031 -1.242188 2.375 -1.171875 C 2.539062 -1.109375 2.722656 -1.078125 2.921875 -1.078125 C 3.160156 -1.078125 3.390625 -1.113281 3.609375 -1.1875 C 3.835938 -1.257812 4.019531 -1.34375 4.15625 -1.4375 Z M 4.15625 -4.6875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-15">
-<path style="stroke:none;" d="M 2.8125 -0.703125 C 3.3125 -0.703125 3.691406 -0.796875 3.953125 -0.984375 C 4.222656 -1.171875 4.359375 -1.457031 4.359375 -1.84375 C 4.359375 -2.082031 4.304688 -2.28125 4.203125 -2.4375 C 4.109375 -2.601562 3.984375 -2.75 3.828125 -2.875 C 3.671875 -3 3.488281 -3.109375 3.28125 -3.203125 C 3.082031 -3.296875 2.878906 -3.378906 2.671875 -3.453125 C 2.429688 -3.546875 2.203125 -3.648438 1.984375 -3.765625 C 1.765625 -3.890625 1.566406 -4.03125 1.390625 -4.1875 C 1.222656 -4.351562 1.085938 -4.546875 0.984375 -4.765625 C 0.890625 -4.984375 0.84375 -5.238281 0.84375 -5.53125 C 0.84375 -6.175781 1.046875 -6.679688 1.453125 -7.046875 C 1.859375 -7.410156 2.425781 -7.59375 3.15625 -7.59375 C 3.351562 -7.59375 3.550781 -7.578125 3.75 -7.546875 C 3.945312 -7.523438 4.128906 -7.492188 4.296875 -7.453125 C 4.460938 -7.410156 4.609375 -7.359375 4.734375 -7.296875 C 4.867188 -7.242188 4.976562 -7.191406 5.0625 -7.140625 L 4.75 -6.3125 C 4.59375 -6.40625 4.375 -6.5 4.09375 -6.59375 C 3.8125 -6.695312 3.5 -6.75 3.15625 -6.75 C 2.789062 -6.75 2.476562 -6.65625 2.21875 -6.46875 C 1.957031 -6.289062 1.828125 -6.019531 1.828125 -5.65625 C 1.828125 -5.457031 1.863281 -5.285156 1.9375 -5.140625 C 2.007812 -4.992188 2.113281 -4.863281 2.25 -4.75 C 2.382812 -4.644531 2.535156 -4.546875 2.703125 -4.453125 C 2.878906 -4.367188 3.070312 -4.285156 3.28125 -4.203125 C 3.59375 -4.078125 3.875 -3.945312 4.125 -3.8125 C 4.375 -3.6875 4.585938 -3.535156 4.765625 -3.359375 C 4.953125 -3.179688 5.09375 -2.972656 5.1875 -2.734375 C 5.289062 -2.492188 5.34375 -2.203125 5.34375 -1.859375 C 5.34375 -1.210938 5.125 -0.710938 4.6875 -0.359375 C 4.25 -0.015625 3.625 0.15625 2.8125 0.15625 C 2.539062 0.15625 2.289062 0.132812 2.0625 0.09375 C 1.832031 0.0625 1.625 0.0195312 1.4375 -0.03125 C 1.257812 -0.09375 1.101562 -0.148438 0.96875 -0.203125 C 0.832031 -0.253906 0.726562 -0.304688 0.65625 -0.359375 L 0.953125 -1.171875 C 1.117188 -1.085938 1.359375 -0.988281 1.671875 -0.875 C 1.984375 -0.757812 2.363281 -0.703125 2.8125 -0.703125 Z M 2.8125 -0.703125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-16">
-<path style="stroke:none;" d="M 3.109375 -5.703125 C 3.859375 -5.703125 4.4375 -5.46875 4.84375 -5 C 5.25 -4.53125 5.453125 -3.820312 5.453125 -2.875 L 5.453125 -2.515625 L 1.46875 -2.515625 C 1.507812 -1.941406 1.703125 -1.503906 2.046875 -1.203125 C 2.390625 -0.898438 2.867188 -0.75 3.484375 -0.75 C 3.835938 -0.75 4.132812 -0.773438 4.375 -0.828125 C 4.625 -0.890625 4.8125 -0.953125 4.9375 -1.015625 L 5.078125 -0.1875 C 4.953125 -0.113281 4.734375 -0.046875 4.421875 0.015625 C 4.109375 0.0859375 3.757812 0.125 3.375 0.125 C 2.894531 0.125 2.472656 0.0507812 2.109375 -0.09375 C 1.742188 -0.238281 1.441406 -0.4375 1.203125 -0.6875 C 0.960938 -0.945312 0.78125 -1.253906 0.65625 -1.609375 C 0.539062 -1.960938 0.484375 -2.347656 0.484375 -2.765625 C 0.484375 -3.265625 0.554688 -3.695312 0.703125 -4.0625 C 0.859375 -4.4375 1.0625 -4.742188 1.3125 -4.984375 C 1.5625 -5.222656 1.835938 -5.398438 2.140625 -5.515625 C 2.453125 -5.640625 2.773438 -5.703125 3.109375 -5.703125 Z M 4.453125 -3.328125 C 4.453125 -3.796875 4.328125 -4.164062 4.078125 -4.4375 C 3.828125 -4.71875 3.5 -4.859375 3.09375 -4.859375 C 2.863281 -4.859375 2.65625 -4.8125 2.46875 -4.71875 C 2.28125 -4.632812 2.117188 -4.519531 1.984375 -4.375 C 1.847656 -4.226562 1.738281 -4.0625 1.65625 -3.875 C 1.570312 -3.695312 1.519531 -3.515625 1.5 -3.328125 Z M 4.453125 -3.328125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-17">
-<path style="stroke:none;" d="M 4.15625 -4.390625 C 4.039062 -4.492188 3.875 -4.59375 3.65625 -4.6875 C 3.445312 -4.78125 3.222656 -4.828125 2.984375 -4.828125 C 2.722656 -4.828125 2.5 -4.773438 2.3125 -4.671875 C 2.125 -4.566406 1.96875 -4.421875 1.84375 -4.234375 C 1.726562 -4.054688 1.640625 -3.84375 1.578125 -3.59375 C 1.523438 -3.34375 1.5 -3.070312 1.5 -2.78125 C 1.5 -2.132812 1.648438 -1.632812 1.953125 -1.28125 C 2.253906 -0.925781 2.648438 -0.75 3.140625 -0.75 C 3.390625 -0.75 3.597656 -0.757812 3.765625 -0.78125 C 3.941406 -0.8125 4.070312 -0.835938 4.15625 -0.859375 Z M 4.15625 -8.140625 L 5.140625 -8.3125 L 5.140625 -0.15625 C 4.929688 -0.09375 4.65625 -0.03125 4.3125 0.03125 C 3.976562 0.09375 3.585938 0.125 3.140625 0.125 C 2.742188 0.125 2.378906 0.0546875 2.046875 -0.078125 C 1.722656 -0.210938 1.441406 -0.40625 1.203125 -0.65625 C 0.972656 -0.90625 0.796875 -1.207031 0.671875 -1.5625 C 0.546875 -1.925781 0.484375 -2.332031 0.484375 -2.78125 C 0.484375 -3.21875 0.535156 -3.613281 0.640625 -3.96875 C 0.742188 -4.320312 0.898438 -4.625 1.109375 -4.875 C 1.316406 -5.132812 1.566406 -5.335938 1.859375 -5.484375 C 2.148438 -5.628906 2.488281 -5.703125 2.875 -5.703125 C 3.164062 -5.703125 3.421875 -5.664062 3.640625 -5.59375 C 3.867188 -5.519531 4.039062 -5.441406 4.15625 -5.359375 Z M 4.15625 -8.140625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-18">
-<path style="stroke:none;" d="M 1.28125 0 L 1.28125 -5.265625 C 2.101562 -5.546875 2.925781 -5.6875 3.75 -5.6875 C 4.007812 -5.6875 4.253906 -5.675781 4.484375 -5.65625 C 4.722656 -5.632812 4.976562 -5.59375 5.25 -5.53125 L 5.078125 -4.65625 C 4.816406 -4.726562 4.585938 -4.773438 4.390625 -4.796875 C 4.203125 -4.816406 3.988281 -4.828125 3.75 -4.828125 C 3.269531 -4.828125 2.773438 -4.757812 2.265625 -4.625 L 2.265625 0 Z M 1.28125 0 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-19">
-<path style="stroke:none;" d="M 0.609375 1.046875 C 0.679688 1.085938 0.78125 1.117188 0.90625 1.140625 C 1.039062 1.160156 1.164062 1.171875 1.28125 1.171875 C 1.675781 1.171875 1.984375 1.082031 2.203125 0.90625 C 2.421875 0.738281 2.625 0.460938 2.8125 0.078125 C 2.363281 -0.773438 1.941406 -1.6875 1.546875 -2.65625 C 1.148438 -3.625 0.828125 -4.59375 0.578125 -5.5625 L 1.65625 -5.5625 C 1.738281 -5.25 1.832031 -4.90625 1.9375 -4.53125 C 2.039062 -4.15625 2.160156 -3.769531 2.296875 -3.375 C 2.441406 -2.988281 2.585938 -2.597656 2.734375 -2.203125 C 2.890625 -1.804688 3.054688 -1.425781 3.234375 -1.0625 C 3.367188 -1.4375 3.488281 -1.800781 3.59375 -2.15625 C 3.707031 -2.519531 3.8125 -2.882812 3.90625 -3.25 C 4.007812 -3.613281 4.109375 -3.984375 4.203125 -4.359375 C 4.296875 -4.742188 4.394531 -5.144531 4.5 -5.5625 L 5.53125 -5.5625 C 5.269531 -4.53125 4.984375 -3.523438 4.671875 -2.546875 C 4.359375 -1.566406 4.019531 -0.660156 3.65625 0.171875 C 3.519531 0.484375 3.375 0.753906 3.21875 0.984375 C 3.0625 1.222656 2.890625 1.414062 2.703125 1.5625 C 2.523438 1.71875 2.316406 1.832031 2.078125 1.90625 C 1.847656 1.976562 1.585938 2.015625 1.296875 2.015625 C 1.140625 2.015625 0.972656 1.992188 0.796875 1.953125 C 0.617188 1.910156 0.5 1.875 0.4375 1.84375 Z M 0.609375 1.046875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-20">
-<path style="stroke:none;" d="M 0.34375 -3.71875 C 0.34375 -4.382812 0.40625 -4.960938 0.53125 -5.453125 C 0.664062 -5.941406 0.847656 -6.34375 1.078125 -6.65625 C 1.304688 -6.96875 1.582031 -7.203125 1.90625 -7.359375 C 2.238281 -7.515625 2.601562 -7.59375 3 -7.59375 C 3.394531 -7.59375 3.753906 -7.515625 4.078125 -7.359375 C 4.410156 -7.203125 4.691406 -6.96875 4.921875 -6.65625 C 5.148438 -6.34375 5.328125 -5.941406 5.453125 -5.453125 C 5.585938 -4.960938 5.65625 -4.382812 5.65625 -3.71875 C 5.65625 -3.050781 5.585938 -2.472656 5.453125 -1.984375 C 5.328125 -1.503906 5.148438 -1.101562 4.921875 -0.78125 C 4.691406 -0.457031 4.410156 -0.21875 4.078125 -0.0625 C 3.753906 0.0820312 3.394531 0.15625 3 0.15625 C 2.601562 0.15625 2.238281 0.0820312 1.90625 -0.0625 C 1.582031 -0.21875 1.304688 -0.457031 1.078125 -0.78125 C 0.847656 -1.101562 0.664062 -1.503906 0.53125 -1.984375 C 0.40625 -2.472656 0.34375 -3.050781 0.34375 -3.71875 Z M 1.359375 -3.71875 C 1.359375 -2.738281 1.488281 -1.988281 1.75 -1.46875 C 2.007812 -0.957031 2.414062 -0.703125 2.96875 -0.703125 C 3.53125 -0.703125 3.953125 -0.957031 4.234375 -1.46875 C 4.515625 -1.988281 4.65625 -2.738281 4.65625 -3.71875 C 4.65625 -4.695312 4.515625 -5.445312 4.234375 -5.96875 C 3.953125 -6.488281 3.53125 -6.75 2.96875 -6.75 C 2.414062 -6.75 2.007812 -6.488281 1.75 -5.96875 C 1.488281 -5.445312 1.359375 -4.695312 1.359375 -3.71875 Z M 1.359375 -3.71875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-21">
-<path style="stroke:none;" d="M 5.140625 -0.15625 C 4.929688 -0.101562 4.644531 -0.046875 4.28125 0.015625 C 3.925781 0.0859375 3.507812 0.125 3.03125 0.125 C 2.613281 0.125 2.265625 0.0625 1.984375 -0.0625 C 1.703125 -0.1875 1.472656 -0.363281 1.296875 -0.59375 C 1.117188 -0.820312 0.992188 -1.09375 0.921875 -1.40625 C 0.847656 -1.71875 0.8125 -2.0625 0.8125 -2.4375 L 0.8125 -5.5625 L 1.796875 -5.5625 L 1.796875 -2.65625 C 1.796875 -1.96875 1.894531 -1.476562 2.09375 -1.1875 C 2.300781 -0.894531 2.644531 -0.75 3.125 -0.75 C 3.226562 -0.75 3.332031 -0.753906 3.4375 -0.765625 C 3.550781 -0.773438 3.65625 -0.785156 3.75 -0.796875 C 3.851562 -0.804688 3.9375 -0.816406 4 -0.828125 C 4.070312 -0.847656 4.125 -0.859375 4.15625 -0.859375 L 4.15625 -5.5625 L 5.140625 -5.5625 Z M 5.140625 -0.15625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-22">
-<path style="stroke:none;" d="M 2.921875 -5.5625 L 5.265625 -5.5625 L 5.265625 -4.734375 L 2.921875 -4.734375 L 2.921875 -2.140625 C 2.921875 -1.867188 2.9375 -1.644531 2.96875 -1.46875 C 3.007812 -1.289062 3.078125 -1.144531 3.171875 -1.03125 C 3.265625 -0.925781 3.382812 -0.851562 3.53125 -0.8125 C 3.675781 -0.769531 3.851562 -0.75 4.0625 -0.75 C 4.34375 -0.75 4.570312 -0.773438 4.75 -0.828125 C 4.925781 -0.878906 5.09375 -0.941406 5.25 -1.015625 L 5.40625 -0.1875 C 5.289062 -0.132812 5.109375 -0.0703125 4.859375 0 C 4.617188 0.0820312 4.316406 0.125 3.953125 0.125 C 3.546875 0.125 3.207031 0.078125 2.9375 -0.015625 C 2.675781 -0.109375 2.46875 -0.25 2.3125 -0.4375 C 2.164062 -0.632812 2.066406 -0.875 2.015625 -1.15625 C 1.960938 -1.4375 1.9375 -1.765625 1.9375 -2.140625 L 1.9375 -4.734375 L 0.75 -4.734375 L 0.75 -5.5625 L 1.9375 -5.5625 L 1.9375 -7.125 L 2.921875 -7.296875 Z M 2.921875 -5.5625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-23">
-<path style="stroke:none;" d="M 4.5 -2.765625 C 4.5 -3.421875 4.347656 -3.925781 4.046875 -4.28125 C 3.742188 -4.632812 3.347656 -4.8125 2.859375 -4.8125 C 2.585938 -4.8125 2.375 -4.796875 2.21875 -4.765625 C 2.0625 -4.742188 1.9375 -4.71875 1.84375 -4.6875 L 1.84375 -1.171875 C 1.957031 -1.066406 2.117188 -0.96875 2.328125 -0.875 C 2.546875 -0.789062 2.773438 -0.75 3.015625 -0.75 C 3.273438 -0.75 3.5 -0.800781 3.6875 -0.90625 C 3.875 -1.007812 4.023438 -1.148438 4.140625 -1.328125 C 4.265625 -1.515625 4.351562 -1.726562 4.40625 -1.96875 C 4.46875 -2.21875 4.5 -2.484375 4.5 -2.765625 Z M 5.515625 -2.765625 C 5.515625 -2.347656 5.460938 -1.957031 5.359375 -1.59375 C 5.253906 -1.238281 5.097656 -0.929688 4.890625 -0.671875 C 4.679688 -0.421875 4.429688 -0.222656 4.140625 -0.078125 C 3.847656 0.0546875 3.507812 0.125 3.125 0.125 C 2.832031 0.125 2.570312 0.0859375 2.34375 0.015625 C 2.125 -0.046875 1.957031 -0.125 1.84375 -0.21875 L 1.84375 1.984375 L 0.859375 1.984375 L 0.859375 -5.40625 C 1.066406 -5.46875 1.34375 -5.53125 1.6875 -5.59375 C 2.03125 -5.65625 2.421875 -5.6875 2.859375 -5.6875 C 3.253906 -5.6875 3.613281 -5.617188 3.9375 -5.484375 C 4.269531 -5.347656 4.550781 -5.15625 4.78125 -4.90625 C 5.019531 -4.65625 5.203125 -4.347656 5.328125 -3.984375 C 5.453125 -3.617188 5.515625 -3.210938 5.515625 -2.765625 Z M 5.515625 -2.765625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph1-24">
-<path style="stroke:none;" d="M 3.015625 -3.734375 L 4.15625 -7.421875 L 5.09375 -7.421875 C 5.25 -6.253906 5.359375 -5.054688 5.421875 -3.828125 C 5.492188 -2.609375 5.554688 -1.332031 5.609375 0 L 4.65625 0 C 4.644531 -0.425781 4.632812 -0.890625 4.625 -1.390625 C 4.625 -1.898438 4.613281 -2.421875 4.59375 -2.953125 C 4.582031 -3.492188 4.570312 -4.039062 4.5625 -4.59375 C 4.550781 -5.144531 4.539062 -5.679688 4.53125 -6.203125 L 3.4375 -2.8125 L 2.578125 -2.8125 L 1.46875 -6.203125 C 1.46875 -5.679688 1.457031 -5.144531 1.4375 -4.59375 C 1.425781 -4.050781 1.414062 -3.507812 1.40625 -2.96875 C 1.394531 -2.425781 1.382812 -1.898438 1.375 -1.390625 C 1.363281 -0.890625 1.351562 -0.425781 1.34375 0 L 0.390625 0 C 0.410156 -0.601562 0.4375 -1.222656 0.46875 -1.859375 C 0.5 -2.503906 0.535156 -3.144531 0.578125 -3.78125 C 0.617188 -4.414062 0.671875 -5.039062 0.734375 -5.65625 C 0.796875 -6.269531 0.863281 -6.859375 0.9375 -7.421875 L 1.84375 -7.421875 Z M 3.015625 -3.734375 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-0">
-<path style="stroke:none;" d="M 0.640625 2.296875 L 0.640625 -9.171875 L 7.140625 -9.171875 L 7.140625 2.296875 Z M 1.375 1.578125 L 6.421875 1.578125 L 6.421875 -8.4375 L 1.375 -8.4375 Z M 1.375 1.578125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-1">
-<path style="stroke:none;" d="M 6.34375 -6.84375 L 6.34375 -5.75 C 6.007812 -5.925781 5.675781 -6.0625 5.34375 -6.15625 C 5.007812 -6.25 4.675781 -6.296875 4.34375 -6.296875 C 3.582031 -6.296875 2.992188 -6.050781 2.578125 -5.5625 C 2.160156 -5.082031 1.953125 -4.410156 1.953125 -3.546875 C 1.953125 -2.679688 2.160156 -2.007812 2.578125 -1.53125 C 2.992188 -1.050781 3.582031 -0.8125 4.34375 -0.8125 C 4.675781 -0.8125 5.007812 -0.851562 5.34375 -0.9375 C 5.675781 -1.03125 6.007812 -1.171875 6.34375 -1.359375 L 6.34375 -0.265625 C 6.019531 -0.117188 5.679688 -0.0078125 5.328125 0.0625 C 4.984375 0.144531 4.613281 0.1875 4.21875 0.1875 C 3.144531 0.1875 2.289062 -0.144531 1.65625 -0.8125 C 1.03125 -1.488281 0.71875 -2.398438 0.71875 -3.546875 C 0.71875 -4.703125 1.035156 -5.613281 1.671875 -6.28125 C 2.304688 -6.945312 3.179688 -7.28125 4.296875 -7.28125 C 4.648438 -7.28125 5 -7.242188 5.34375 -7.171875 C 5.6875 -7.097656 6.019531 -6.988281 6.34375 -6.84375 Z M 6.34375 -6.84375 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-2">
-<path style="stroke:none;" d="M 5.34375 -6.015625 C 5.207031 -6.085938 5.0625 -6.140625 4.90625 -6.171875 C 4.757812 -6.210938 4.59375 -6.234375 4.40625 -6.234375 C 3.75 -6.234375 3.242188 -6.019531 2.890625 -5.59375 C 2.535156 -5.164062 2.359375 -4.550781 2.359375 -3.75 L 2.359375 0 L 1.1875 0 L 1.1875 -7.109375 L 2.359375 -7.109375 L 2.359375 -6 C 2.597656 -6.4375 2.914062 -6.757812 3.3125 -6.96875 C 3.707031 -7.175781 4.1875 -7.28125 4.75 -7.28125 C 4.832031 -7.28125 4.921875 -7.273438 5.015625 -7.265625 C 5.109375 -7.253906 5.21875 -7.238281 5.34375 -7.21875 Z M 5.34375 -6.015625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-3">
-<path style="stroke:none;" d="M 3.984375 -6.296875 C 3.359375 -6.296875 2.863281 -6.050781 2.5 -5.5625 C 2.132812 -5.070312 1.953125 -4.398438 1.953125 -3.546875 C 1.953125 -2.691406 2.128906 -2.019531 2.484375 -1.53125 C 2.847656 -1.050781 3.347656 -0.8125 3.984375 -0.8125 C 4.597656 -0.8125 5.085938 -1.054688 5.453125 -1.546875 C 5.816406 -2.035156 6 -2.703125 6 -3.546875 C 6 -4.390625 5.816406 -5.054688 5.453125 -5.546875 C 5.085938 -6.046875 4.597656 -6.296875 3.984375 -6.296875 Z M 3.984375 -7.28125 C 4.992188 -7.28125 5.789062 -6.945312 6.375 -6.28125 C 6.957031 -5.625 7.25 -4.710938 7.25 -3.546875 C 7.25 -2.378906 6.957031 -1.460938 6.375 -0.796875 C 5.789062 -0.140625 4.992188 0.1875 3.984375 0.1875 C 2.960938 0.1875 2.160156 -0.140625 1.578125 -0.796875 C 1.003906 -1.460938 0.71875 -2.378906 0.71875 -3.546875 C 0.71875 -4.710938 1.003906 -5.625 1.578125 -6.28125 C 2.160156 -6.945312 2.960938 -7.28125 3.984375 -7.28125 Z M 3.984375 -7.28125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-4">
-<path style="stroke:none;" d="M 2.359375 -1.0625 L 2.359375 2.703125 L 1.1875 2.703125 L 1.1875 -7.109375 L 2.359375 -7.109375 L 2.359375 -6.03125 C 2.597656 -6.457031 2.90625 -6.769531 3.28125 -6.96875 C 3.65625 -7.175781 4.101562 -7.28125 4.625 -7.28125 C 5.488281 -7.28125 6.191406 -6.9375 6.734375 -6.25 C 7.273438 -5.5625 7.546875 -4.660156 7.546875 -3.546875 C 7.546875 -2.429688 7.273438 -1.53125 6.734375 -0.84375 C 6.191406 -0.15625 5.488281 0.1875 4.625 0.1875 C 4.101562 0.1875 3.65625 0.0820312 3.28125 -0.125 C 2.90625 -0.332031 2.597656 -0.644531 2.359375 -1.0625 Z M 6.328125 -3.546875 C 6.328125 -4.410156 6.148438 -5.082031 5.796875 -5.5625 C 5.441406 -6.050781 4.957031 -6.296875 4.34375 -6.296875 C 3.726562 -6.296875 3.242188 -6.050781 2.890625 -5.5625 C 2.535156 -5.082031 2.359375 -4.410156 2.359375 -3.546875 C 2.359375 -2.691406 2.535156 -2.019531 2.890625 -1.53125 C 3.242188 -1.039062 3.726562 -0.796875 4.34375 -0.796875 C 4.957031 -0.796875 5.441406 -1.039062 5.796875 -1.53125 C 6.148438 -2.019531 6.328125 -2.691406 6.328125 -3.546875 Z M 6.328125 -3.546875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-5">
-<path style="stroke:none;" d="M 5.75 -6.90625 L 5.75 -5.796875 C 5.425781 -5.960938 5.085938 -6.085938 4.734375 -6.171875 C 4.378906 -6.253906 4.007812 -6.296875 3.625 -6.296875 C 3.039062 -6.296875 2.601562 -6.207031 2.3125 -6.03125 C 2.03125 -5.851562 1.890625 -5.585938 1.890625 -5.234375 C 1.890625 -4.960938 1.988281 -4.75 2.1875 -4.59375 C 2.394531 -4.445312 2.816406 -4.300781 3.453125 -4.15625 L 3.84375 -4.0625 C 4.675781 -3.882812 5.265625 -3.632812 5.609375 -3.3125 C 5.960938 -2.988281 6.140625 -2.539062 6.140625 -1.96875 C 6.140625 -1.300781 5.878906 -0.773438 5.359375 -0.390625 C 4.835938 -0.00390625 4.117188 0.1875 3.203125 0.1875 C 2.816406 0.1875 2.414062 0.148438 2 0.078125 C 1.59375 0.00390625 1.160156 -0.109375 0.703125 -0.265625 L 0.703125 -1.46875 C 1.140625 -1.238281 1.566406 -1.066406 1.984375 -0.953125 C 2.398438 -0.847656 2.8125 -0.796875 3.21875 -0.796875 C 3.769531 -0.796875 4.191406 -0.890625 4.484375 -1.078125 C 4.785156 -1.265625 4.9375 -1.53125 4.9375 -1.875 C 4.9375 -2.1875 4.828125 -2.425781 4.609375 -2.59375 C 4.398438 -2.769531 3.9375 -2.9375 3.21875 -3.09375 L 2.8125 -3.1875 C 2.082031 -3.34375 1.554688 -3.578125 1.234375 -3.890625 C 0.910156 -4.203125 0.75 -4.632812 0.75 -5.1875 C 0.75 -5.851562 0.984375 -6.367188 1.453125 -6.734375 C 1.929688 -7.097656 2.609375 -7.28125 3.484375 -7.28125 C 3.910156 -7.28125 4.316406 -7.25 4.703125 -7.1875 C 5.085938 -7.125 5.4375 -7.03125 5.75 -6.90625 Z M 5.75 -6.90625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-6">
-<path style="stroke:none;" d="M 4.453125 -3.578125 C 3.515625 -3.578125 2.863281 -3.46875 2.5 -3.25 C 2.132812 -3.03125 1.953125 -2.660156 1.953125 -2.140625 C 1.953125 -1.734375 2.085938 -1.40625 2.359375 -1.15625 C 2.628906 -0.914062 3 -0.796875 3.46875 -0.796875 C 4.113281 -0.796875 4.632812 -1.023438 5.03125 -1.484375 C 5.425781 -1.941406 5.625 -2.550781 5.625 -3.3125 L 5.625 -3.578125 Z M 6.78125 -4.0625 L 6.78125 0 L 5.625 0 L 5.625 -1.078125 C 5.351562 -0.648438 5.019531 -0.332031 4.625 -0.125 C 4.226562 0.0820312 3.738281 0.1875 3.15625 0.1875 C 2.425781 0.1875 1.847656 -0.015625 1.421875 -0.421875 C 0.992188 -0.835938 0.78125 -1.382812 0.78125 -2.0625 C 0.78125 -2.863281 1.046875 -3.46875 1.578125 -3.875 C 2.117188 -4.28125 2.921875 -4.484375 3.984375 -4.484375 L 5.625 -4.484375 L 5.625 -4.609375 C 5.625 -5.140625 5.445312 -5.550781 5.09375 -5.84375 C 4.738281 -6.144531 4.238281 -6.296875 3.59375 -6.296875 C 3.1875 -6.296875 2.789062 -6.242188 2.40625 -6.140625 C 2.019531 -6.046875 1.648438 -5.898438 1.296875 -5.703125 L 1.296875 -6.78125 C 1.722656 -6.945312 2.140625 -7.070312 2.546875 -7.15625 C 2.953125 -7.238281 3.34375 -7.28125 3.71875 -7.28125 C 4.75 -7.28125 5.515625 -7.015625 6.015625 -6.484375 C 6.523438 -5.953125 6.78125 -5.144531 6.78125 -4.0625 Z M 6.78125 -4.0625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-7">
-<path style="stroke:none;" d="M 1.21875 -9.875 L 2.390625 -9.875 L 2.390625 0 L 1.21875 0 Z M 1.21875 -9.875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-8">
-<path style="stroke:none;" d="M 7.3125 -3.84375 L 7.3125 -3.28125 L 1.9375 -3.28125 C 1.988281 -2.46875 2.226562 -1.851562 2.65625 -1.4375 C 3.09375 -1.019531 3.695312 -0.8125 4.46875 -0.8125 C 4.914062 -0.8125 5.347656 -0.863281 5.765625 -0.96875 C 6.191406 -1.082031 6.613281 -1.25 7.03125 -1.46875 L 7.03125 -0.359375 C 6.613281 -0.179688 6.179688 -0.046875 5.734375 0.046875 C 5.296875 0.140625 4.851562 0.1875 4.40625 0.1875 C 3.269531 0.1875 2.367188 -0.140625 1.703125 -0.796875 C 1.046875 -1.460938 0.71875 -2.359375 0.71875 -3.484375 C 0.71875 -4.648438 1.03125 -5.570312 1.65625 -6.25 C 2.289062 -6.9375 3.140625 -7.28125 4.203125 -7.28125 C 5.160156 -7.28125 5.914062 -6.972656 6.46875 -6.359375 C 7.03125 -5.742188 7.3125 -4.90625 7.3125 -3.84375 Z M 6.140625 -4.1875 C 6.128906 -4.820312 5.945312 -5.332031 5.59375 -5.71875 C 5.25 -6.101562 4.789062 -6.296875 4.21875 -6.296875 C 3.5625 -6.296875 3.035156 -6.109375 2.640625 -5.734375 C 2.253906 -5.367188 2.03125 -4.851562 1.96875 -4.1875 Z M 6.140625 -4.1875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-9">
-<path style="stroke:none;" d="M 6.328125 -3.546875 C 6.328125 -4.410156 6.148438 -5.082031 5.796875 -5.5625 C 5.441406 -6.050781 4.957031 -6.296875 4.34375 -6.296875 C 3.726562 -6.296875 3.242188 -6.050781 2.890625 -5.5625 C 2.535156 -5.082031 2.359375 -4.410156 2.359375 -3.546875 C 2.359375 -2.691406 2.535156 -2.019531 2.890625 -1.53125 C 3.242188 -1.039062 3.726562 -0.796875 4.34375 -0.796875 C 4.957031 -0.796875 5.441406 -1.039062 5.796875 -1.53125 C 6.148438 -2.019531 6.328125 -2.691406 6.328125 -3.546875 Z M 2.359375 -6.03125 C 2.597656 -6.457031 2.90625 -6.769531 3.28125 -6.96875 C 3.65625 -7.175781 4.101562 -7.28125 4.625 -7.28125 C 5.488281 -7.28125 6.191406 -6.9375 6.734375 -6.25 C 7.273438 -5.5625 7.546875 -4.660156 7.546875 -3.546875 C 7.546875 -2.429688 7.273438 -1.53125 6.734375 -0.84375 C 6.191406 -0.15625 5.488281 0.1875 4.625 0.1875 C 4.101562 0.1875 3.65625 0.0820312 3.28125 -0.125 C 2.90625 -0.332031 2.597656 -0.644531 2.359375 -1.0625 L 2.359375 0 L 1.1875 0 L 1.1875 -9.875 L 2.359375 -9.875 Z M 2.359375 -6.03125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-10">
-<path style="stroke:none;" d="M 1.21875 -7.109375 L 2.390625 -7.109375 L 2.390625 0 L 1.21875 0 Z M 1.21875 -9.875 L 2.390625 -9.875 L 2.390625 -8.390625 L 1.21875 -8.390625 Z M 1.21875 -9.875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-11">
-<path style="stroke:none;" d="M 7.140625 -4.296875 L 7.140625 0 L 5.96875 0 L 5.96875 -4.25 C 5.96875 -4.925781 5.835938 -5.429688 5.578125 -5.765625 C 5.316406 -6.097656 4.921875 -6.265625 4.390625 -6.265625 C 3.765625 -6.265625 3.269531 -6.0625 2.90625 -5.65625 C 2.539062 -5.257812 2.359375 -4.710938 2.359375 -4.015625 L 2.359375 0 L 1.1875 0 L 1.1875 -7.109375 L 2.359375 -7.109375 L 2.359375 -6 C 2.640625 -6.425781 2.96875 -6.742188 3.34375 -6.953125 C 3.71875 -7.171875 4.15625 -7.28125 4.65625 -7.28125 C 5.46875 -7.28125 6.082031 -7.023438 6.5 -6.515625 C 6.925781 -6.015625 7.140625 -5.273438 7.140625 -4.296875 Z M 7.140625 -4.296875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-12">
-<path style="stroke:none;" d="M 5.90625 -3.640625 C 5.90625 -4.484375 5.726562 -5.132812 5.375 -5.59375 C 5.03125 -6.0625 4.539062 -6.296875 3.90625 -6.296875 C 3.28125 -6.296875 2.789062 -6.0625 2.4375 -5.59375 C 2.09375 -5.132812 1.921875 -4.484375 1.921875 -3.640625 C 1.921875 -2.796875 2.09375 -2.140625 2.4375 -1.671875 C 2.789062 -1.210938 3.28125 -0.984375 3.90625 -0.984375 C 4.539062 -0.984375 5.03125 -1.210938 5.375 -1.671875 C 5.726562 -2.140625 5.90625 -2.796875 5.90625 -3.640625 Z M 7.078125 -0.875 C 7.078125 0.332031 6.804688 1.226562 6.265625 1.8125 C 5.722656 2.40625 4.898438 2.703125 3.796875 2.703125 C 3.390625 2.703125 3.003906 2.671875 2.640625 2.609375 C 2.273438 2.546875 1.921875 2.453125 1.578125 2.328125 L 1.578125 1.1875 C 1.921875 1.375 2.257812 1.507812 2.59375 1.59375 C 2.925781 1.6875 3.265625 1.734375 3.609375 1.734375 C 4.378906 1.734375 4.953125 1.535156 5.328125 1.140625 C 5.710938 0.742188 5.90625 0.140625 5.90625 -0.671875 L 5.90625 -1.25 C 5.664062 -0.832031 5.351562 -0.519531 4.96875 -0.3125 C 4.59375 -0.101562 4.144531 0 3.625 0 C 2.75 0 2.046875 -0.332031 1.515625 -1 C 0.984375 -1.664062 0.71875 -2.546875 0.71875 -3.640625 C 0.71875 -4.734375 0.984375 -5.613281 1.515625 -6.28125 C 2.046875 -6.945312 2.75 -7.28125 3.625 -7.28125 C 4.144531 -7.28125 4.59375 -7.175781 4.96875 -6.96875 C 5.351562 -6.757812 5.664062 -6.445312 5.90625 -6.03125 L 5.90625 -7.109375 L 7.078125 -7.109375 Z M 7.078125 -0.875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-13">
-<path style="stroke:none;" d="M 5.125 -8.609375 C 4.1875 -8.609375 3.441406 -8.257812 2.890625 -7.5625 C 2.347656 -6.875 2.078125 -5.929688 2.078125 -4.734375 C 2.078125 -3.535156 2.347656 -2.585938 2.890625 -1.890625 C 3.441406 -1.203125 4.1875 -0.859375 5.125 -0.859375 C 6.050781 -0.859375 6.785156 -1.203125 7.328125 -1.890625 C 7.878906 -2.585938 8.15625 -3.535156 8.15625 -4.734375 C 8.15625 -5.929688 7.878906 -6.875 7.328125 -7.5625 C 6.785156 -8.257812 6.050781 -8.609375 5.125 -8.609375 Z M 5.125 -9.65625 C 6.445312 -9.65625 7.503906 -9.207031 8.296875 -8.3125 C 9.097656 -7.414062 9.5 -6.222656 9.5 -4.734375 C 9.5 -3.234375 9.097656 -2.035156 8.296875 -1.140625 C 7.503906 -0.253906 6.445312 0.1875 5.125 0.1875 C 3.789062 0.1875 2.722656 -0.253906 1.921875 -1.140625 C 1.128906 -2.035156 0.734375 -3.234375 0.734375 -4.734375 C 0.734375 -6.222656 1.128906 -7.414062 1.921875 -8.3125 C 2.722656 -9.207031 3.789062 -9.65625 5.125 -9.65625 Z M 5.125 -9.65625 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-14">
-<path style="stroke:none;" d="M 1.109375 -2.8125 L 1.109375 -7.109375 L 2.265625 -7.109375 L 2.265625 -2.84375 C 2.265625 -2.175781 2.394531 -1.671875 2.65625 -1.328125 C 2.925781 -0.992188 3.320312 -0.828125 3.84375 -0.828125 C 4.476562 -0.828125 4.976562 -1.023438 5.34375 -1.421875 C 5.707031 -1.828125 5.890625 -2.378906 5.890625 -3.078125 L 5.890625 -7.109375 L 7.0625 -7.109375 L 7.0625 0 L 5.890625 0 L 5.890625 -1.09375 C 5.609375 -0.65625 5.28125 -0.332031 4.90625 -0.125 C 4.53125 0.0820312 4.09375 0.1875 3.59375 0.1875 C 2.78125 0.1875 2.160156 -0.0664062 1.734375 -0.578125 C 1.316406 -1.085938 1.109375 -1.832031 1.109375 -2.8125 Z M 4.046875 -7.28125 Z M 4.046875 -7.28125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-15">
-<path style="stroke:none;" d="M 2.375 -9.125 L 2.375 -7.109375 L 4.78125 -7.109375 L 4.78125 -6.203125 L 2.375 -6.203125 L 2.375 -2.34375 C 2.375 -1.757812 2.453125 -1.382812 2.609375 -1.21875 C 2.773438 -1.0625 3.101562 -0.984375 3.59375 -0.984375 L 4.78125 -0.984375 L 4.78125 0 L 3.59375 0 C 2.6875 0 2.0625 -0.164062 1.71875 -0.5 C 1.375 -0.84375 1.203125 -1.457031 1.203125 -2.34375 L 1.203125 -6.203125 L 0.34375 -6.203125 L 0.34375 -7.109375 L 1.203125 -7.109375 L 1.203125 -9.125 Z M 2.375 -9.125 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-16">
-<path style="stroke:none;" d=""/>
-</symbol>
-<symbol overflow="visible" id="glyph2-17">
-<path style="stroke:none;" d="M 1.28125 -9.484375 L 6.71875 -9.484375 L 6.71875 -8.390625 L 2.5625 -8.390625 L 2.5625 -5.609375 L 6.3125 -5.609375 L 6.3125 -4.53125 L 2.5625 -4.53125 L 2.5625 0 L 1.28125 0 Z M 1.28125 -9.484375 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-18">
-<path style="stroke:none;" d="M 6.765625 -5.75 C 7.054688 -6.269531 7.40625 -6.65625 7.8125 -6.90625 C 8.21875 -7.15625 8.695312 -7.28125 9.25 -7.28125 C 9.988281 -7.28125 10.554688 -7.019531 10.953125 -6.5 C 11.359375 -5.976562 11.5625 -5.242188 11.5625 -4.296875 L 11.5625 0 L 10.390625 0 L 10.390625 -4.25 C 10.390625 -4.9375 10.265625 -5.441406 10.015625 -5.765625 C 9.773438 -6.097656 9.410156 -6.265625 8.921875 -6.265625 C 8.316406 -6.265625 7.835938 -6.0625 7.484375 -5.65625 C 7.128906 -5.257812 6.953125 -4.710938 6.953125 -4.015625 L 6.953125 0 L 5.78125 0 L 5.78125 -4.25 C 5.78125 -4.9375 5.660156 -5.441406 5.421875 -5.765625 C 5.179688 -6.097656 4.804688 -6.265625 4.296875 -6.265625 C 3.703125 -6.265625 3.226562 -6.0625 2.875 -5.65625 C 2.53125 -5.25 2.359375 -4.703125 2.359375 -4.015625 L 2.359375 0 L 1.1875 0 L 1.1875 -7.109375 L 2.359375 -7.109375 L 2.359375 -6 C 2.617188 -6.4375 2.9375 -6.757812 3.3125 -6.96875 C 3.6875 -7.175781 4.128906 -7.28125 4.640625 -7.28125 C 5.160156 -7.28125 5.597656 -7.148438 5.953125 -6.890625 C 6.316406 -6.628906 6.585938 -6.25 6.765625 -5.75 Z M 6.765625 -5.75 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-19">
-<path style="stroke:none;" d="M 6.953125 -9.171875 L 6.953125 -7.921875 C 6.472656 -8.148438 6.015625 -8.320312 5.578125 -8.4375 C 5.148438 -8.550781 4.734375 -8.609375 4.328125 -8.609375 C 3.628906 -8.609375 3.085938 -8.472656 2.703125 -8.203125 C 2.328125 -7.929688 2.140625 -7.546875 2.140625 -7.046875 C 2.140625 -6.628906 2.265625 -6.3125 2.515625 -6.09375 C 2.773438 -5.882812 3.253906 -5.710938 3.953125 -5.578125 L 4.734375 -5.421875 C 5.679688 -5.234375 6.382812 -4.910156 6.84375 -4.453125 C 7.300781 -3.992188 7.53125 -3.378906 7.53125 -2.609375 C 7.53125 -1.691406 7.222656 -0.992188 6.609375 -0.515625 C 5.992188 -0.046875 5.085938 0.1875 3.890625 0.1875 C 3.441406 0.1875 2.960938 0.132812 2.453125 0.03125 C 1.953125 -0.0703125 1.429688 -0.222656 0.890625 -0.421875 L 0.890625 -1.734375 C 1.410156 -1.441406 1.921875 -1.222656 2.421875 -1.078125 C 2.921875 -0.929688 3.410156 -0.859375 3.890625 -0.859375 C 4.628906 -0.859375 5.195312 -1 5.59375 -1.28125 C 5.988281 -1.570312 6.1875 -1.984375 6.1875 -2.515625 C 6.1875 -2.984375 6.039062 -3.347656 5.75 -3.609375 C 5.46875 -3.867188 5.003906 -4.066406 4.359375 -4.203125 L 3.578125 -4.359375 C 2.617188 -4.546875 1.925781 -4.84375 1.5 -5.25 C 1.070312 -5.65625 0.859375 -6.21875 0.859375 -6.9375 C 0.859375 -7.78125 1.148438 -8.441406 1.734375 -8.921875 C 2.328125 -9.410156 3.144531 -9.65625 4.1875 -9.65625 C 4.625 -9.65625 5.070312 -9.613281 5.53125 -9.53125 C 6 -9.445312 6.472656 -9.328125 6.953125 -9.171875 Z M 6.953125 -9.171875 "/>
-</symbol>
-<symbol overflow="visible" id="glyph2-20">
-<path style="stroke:none;" d="M 4.1875 0.65625 C 3.851562 1.507812 3.53125 2.0625 3.21875 2.3125 C 2.90625 2.570312 2.488281 2.703125 1.96875 2.703125 L 1.03125 2.703125 L 1.03125 1.734375 L 1.71875 1.734375 C 2.039062 1.734375 2.289062 1.65625 2.46875 1.5 C 2.644531 1.34375 2.835938 0.984375 3.046875 0.421875 L 3.265625 -0.109375 L 0.390625 -7.109375 L 1.625 -7.109375 L 3.84375 -1.546875 L 6.0625 -7.109375 L 7.3125 -7.109375 Z M 4.1875 0.65625 "/>
-</symbol>
-</g>
-</defs>
-<g id="surface268880">
-<rect x="0" y="0" width="774" height="152" style="fill:rgb(100%,100%,100%);fill-opacity:1;stroke:none;"/>
-<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 21.75297 10.408118 L 26.433829 10.408118 L 26.433829 12.281165 L 21.75297 12.281165 Z M 21.75297 10.408118 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 29.079728 10.51222 L 32.829728 10.51222 L 32.829728 12.149915 L 29.079728 12.149915 Z M 29.079728 10.51222 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph0-1" x="20.171875" y="57.705621"/>
-  <use xlink:href="#glyph0-2" x="30.171875" y="57.705621"/>
-  <use xlink:href="#glyph0-3" x="40.171875" y="57.705621"/>
-  <use xlink:href="#glyph0-4" x="50.171875" y="57.705621"/>
-  <use xlink:href="#glyph0-5" x="60.171875" y="57.705621"/>
-  <use xlink:href="#glyph0-6" x="70.171875" y="57.705621"/>
-</g>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph0-7" x="174.203125" y="60.053277"/>
-  <use xlink:href="#glyph0-8" x="184.203125" y="60.053277"/>
-</g>
-<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 40.925236 10.544446 L 44.675236 10.544446 L 44.675236 12.090345 L 40.925236 12.090345 Z M 40.925236 10.544446 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 34.883439 10.536634 L 38.633439 10.536634 L 38.633439 12.120032 L 34.883439 12.120032 Z M 34.883439 10.536634 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 47.084806 10.484876 L 52.045743 10.484876 L 52.045743 12.130774 L 47.084806 12.130774 Z M 47.084806 10.484876 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 53.980118 10.376868 L 59.866642 10.376868 L 59.866642 12.279603 L 53.980118 12.279603 Z M 53.980118 10.376868 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 54.048478 13.825501 L 59.868009 13.825501 L 59.868009 15.490345 L 54.048478 15.490345 Z M 54.048478 13.825501 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 26.481876 11.338001 L 28.593009 11.332337 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 28.968009 11.33136 L 28.468595 11.582728 L 28.593009 11.332337 L 28.467228 11.082728 Z M 28.968009 11.33136 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 32.876798 11.329798 L 34.396525 11.328626 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 34.771525 11.328431 L 34.27172 11.578821 L 34.396525 11.328626 L 34.271329 11.078821 Z M 34.771525 11.328431 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 38.633439 11.328431 L 40.438517 11.319642 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 40.813517 11.317884 L 40.314689 11.570228 L 40.438517 11.319642 L 40.312345 11.070423 Z M 40.813517 11.317884 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 44.675236 11.317298 L 46.597892 11.309876 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 46.972892 11.308313 L 46.473868 11.560267 L 46.597892 11.309876 L 46.471915 11.060267 Z M 46.972892 11.308313 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 52.045743 11.307923 L 53.4934 11.323157 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 53.8684 11.327063 L 53.365861 11.57179 L 53.4934 11.323157 L 53.370939 11.07179 Z M 53.8684 11.327063 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph0-9" x="286.757813" y="60.611871"/>
-  <use xlink:href="#glyph0-10" x="296.757813" y="60.611871"/>
-  <use xlink:href="#glyph0-1" x="306.757813" y="60.611871"/>
-</g>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph0-11" x="405.660156" y="59.904839"/>
-  <use xlink:href="#glyph0-10" x="415.660156" y="59.904839"/>
-  <use xlink:href="#glyph0-12" x="425.660156" y="59.904839"/>
-</g>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph1-1" x="511.308594" y="58.064616"/>
-  <use xlink:href="#glyph1-2" x="517.308757" y="58.064616"/>
-  <use xlink:href="#glyph1-3" x="523.308919" y="58.064616"/>
-  <use xlink:href="#glyph1-4" x="529.309082" y="58.064616"/>
-  <use xlink:href="#glyph1-5" x="535.309245" y="58.064616"/>
-  <use xlink:href="#glyph1-6" x="541.309408" y="58.064616"/>
-  <use xlink:href="#glyph1-7" x="547.30957" y="58.064616"/>
-  <use xlink:href="#glyph1-8" x="553.309733" y="58.064616"/>
-  <use xlink:href="#glyph1-9" x="559.309896" y="58.064616"/>
-  <use xlink:href="#glyph1-10" x="565.310059" y="58.064616"/>
-  <use xlink:href="#glyph1-11" x="571.310221" y="58.064616"/>
-  <use xlink:href="#glyph1-12" x="577.310384" y="58.064616"/>
-  <use xlink:href="#glyph1-13" x="583.310547" y="58.064616"/>
-  <use xlink:href="#glyph1-8" x="589.31071" y="58.064616"/>
-  <use xlink:href="#glyph1-14" x="595.310872" y="58.064616"/>
-</g>
-<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 45.671915 11.342298 L 45.655704 11.342298 L 45.655704 14.657923 L 53.561759 14.657923 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<path style="fill-rule:evenodd;fill:rgb(0%,0%,0%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 53.936759 14.657923 L 53.436759 14.907923 L 53.561759 14.657923 L 53.436759 14.407923 Z M 53.936759 14.657923 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph1-15" x="657.078125" y="57.724772"/>
-  <use xlink:href="#glyph1-16" x="663.078288" y="57.724772"/>
-  <use xlink:href="#glyph1-10" x="669.078451" y="57.724772"/>
-  <use xlink:href="#glyph1-6" x="675.078613" y="57.724772"/>
-  <use xlink:href="#glyph1-8" x="681.078776" y="57.724772"/>
-  <use xlink:href="#glyph1-17" x="687.078939" y="57.724772"/>
-  <use xlink:href="#glyph1-11" x="693.079102" y="57.724772"/>
-  <use xlink:href="#glyph1-18" x="699.079264" y="57.724772"/>
-  <use xlink:href="#glyph1-19" x="705.079427" y="57.724772"/>
-  <use xlink:href="#glyph1-4" x="711.07959" y="57.724772"/>
-  <use xlink:href="#glyph1-20" x="717.079753" y="57.724772"/>
-  <use xlink:href="#glyph1-21" x="723.079915" y="57.724772"/>
-  <use xlink:href="#glyph1-22" x="729.080078" y="57.724772"/>
-  <use xlink:href="#glyph1-23" x="735.080241" y="57.724772"/>
-  <use xlink:href="#glyph1-21" x="741.080404" y="57.724772"/>
-  <use xlink:href="#glyph1-22" x="747.080566" y="57.724772"/>
-</g>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph1-24" x="673.335938" y="124.170085"/>
-  <use xlink:href="#glyph1-11" x="679.3361" y="124.170085"/>
-  <use xlink:href="#glyph1-13" x="685.336263" y="124.170085"/>
-  <use xlink:href="#glyph1-8" x="691.336426" y="124.170085"/>
-  <use xlink:href="#glyph1-4" x="697.336589" y="124.170085"/>
-  <use xlink:href="#glyph1-20" x="703.336751" y="124.170085"/>
-  <use xlink:href="#glyph1-21" x="709.336914" y="124.170085"/>
-  <use xlink:href="#glyph1-22" x="715.337077" y="124.170085"/>
-  <use xlink:href="#glyph1-23" x="721.33724" y="124.170085"/>
-  <use xlink:href="#glyph1-21" x="727.337402" y="124.170085"/>
-  <use xlink:href="#glyph1-22" x="733.337565" y="124.170085"/>
-</g>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph2-1" x="168.71875" y="31.959093"/>
-  <use xlink:href="#glyph2-2" x="175.866102" y="31.959093"/>
-  <use xlink:href="#glyph2-3" x="180.92551" y="31.959093"/>
-  <use xlink:href="#glyph2-4" x="188.879069" y="31.959093"/>
-</g>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph2-5" x="288.109375" y="31.681749"/>
-  <use xlink:href="#glyph2-1" x="294.882378" y="31.681749"/>
-  <use xlink:href="#glyph2-6" x="302.029731" y="31.681749"/>
-  <use xlink:href="#glyph2-7" x="309.996039" y="31.681749"/>
-  <use xlink:href="#glyph2-8" x="313.607964" y="31.681749"/>
-</g>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph2-5" x="535.988281" y="33.365343"/>
-  <use xlink:href="#glyph2-1" x="542.761285" y="33.365343"/>
-  <use xlink:href="#glyph2-6" x="549.908637" y="33.365343"/>
-  <use xlink:href="#glyph2-7" x="557.874946" y="33.365343"/>
-  <use xlink:href="#glyph2-8" x="561.486871" y="33.365343"/>
-</g>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph2-9" x="26.695313" y="32.365343"/>
-  <use xlink:href="#glyph2-10" x="34.947266" y="32.365343"/>
-  <use xlink:href="#glyph2-11" x="38.559191" y="32.365343"/>
-  <use xlink:href="#glyph2-11" x="46.798394" y="32.365343"/>
-  <use xlink:href="#glyph2-10" x="55.037598" y="32.365343"/>
-  <use xlink:href="#glyph2-11" x="58.649523" y="32.365343"/>
-  <use xlink:href="#glyph2-12" x="66.888726" y="32.365343"/>
-</g>
-<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-dasharray:0.14,0.14;stroke-miterlimit:10;" d="M 45.300431 9.486438 L 60.373478 9.486438 L 60.373478 16.175696 L 45.300431 16.175696 Z M 45.300431 9.486438 " transform="matrix(20,0,0,20,-434.059401,-172.47877)"/>
-<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
-  <use xlink:href="#glyph2-13" x="532.003906" y="11.904405"/>
-  <use xlink:href="#glyph2-14" x="542.236382" y="11.904405"/>
-  <use xlink:href="#glyph2-15" x="550.475586" y="11.904405"/>
-  <use xlink:href="#glyph2-4" x="555.5727" y="11.904405"/>
-  <use xlink:href="#glyph2-14" x="563.824653" y="11.904405"/>
-  <use xlink:href="#glyph2-15" x="572.063856" y="11.904405"/>
-  <use xlink:href="#glyph2-16" x="577.16097" y="11.904405"/>
-  <use xlink:href="#glyph2-17" x="581.293186" y="11.904405"/>
-  <use xlink:href="#glyph2-3" x="588.307346" y="11.904405"/>
-  <use xlink:href="#glyph2-2" x="596.260905" y="11.904405"/>
-  <use xlink:href="#glyph2-18" x="601.377279" y="11.904405"/>
-  <use xlink:href="#glyph2-6" x="614.040853" y="11.904405"/>
-  <use xlink:href="#glyph2-15" x="622.007161" y="11.904405"/>
-  <use xlink:href="#glyph2-15" x="627.104275" y="11.904405"/>
-  <use xlink:href="#glyph2-8" x="632.201389" y="11.904405"/>
-  <use xlink:href="#glyph2-2" x="640.199436" y="11.904405"/>
-  <use xlink:href="#glyph2-16" x="645.544217" y="11.904405"/>
-  <use xlink:href="#glyph2-19" x="649.676432" y="11.904405"/>
-  <use xlink:href="#glyph2-20" x="657.928385" y="11.904405"/>
-  <use xlink:href="#glyph2-5" x="665.621799" y="11.904405"/>
-  <use xlink:href="#glyph2-15" x="672.394803" y="11.904405"/>
-  <use xlink:href="#glyph2-8" x="677.491916" y="11.904405"/>
-  <use xlink:href="#glyph2-18" x="685.489963" y="11.904405"/>
-</g>
-</g>
-</svg>
diff --git a/Documentation/media/v4l-drivers/ivtv-cardlist.rst b/Documentation/media/v4l-drivers/ivtv-cardlist.rst
deleted file mode 100644
index c34a9ebc9ac2..000000000000
--- a/Documentation/media/v4l-drivers/ivtv-cardlist.rst
+++ /dev/null
@@ -1,139 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-IVTV cards list
-===============
-
-.. tabularcolumns:: |p{1.4cm}|p{12.7cm}|p{3.4cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - PCI IDs
-
-   * - 0
-     - Hauppauge WinTV PVR-250
-     - IVTV16 104d:813d
-
-   * - 1
-     - Hauppauge WinTV PVR-350
-     - IVTV16 104d:813d
-
-   * - 2
-     - Hauppauge WinTV PVR-150
-     - IVTV16 104d:813d
-
-   * - 3
-     - AVerMedia M179
-     - IVTV15 1461:a3cf, IVTV15 1461:a3ce
-
-   * - 4
-     - Yuan MPG600, Kuroutoshikou ITVC16-STVLP
-     - IVTV16 12ab:fff3, IVTV16 12ab:ffff
-
-   * - 5
-     - YUAN MPG160, Kuroutoshikou ITVC15-STVLP, I/O Data GV-M2TV/PCI
-     - IVTV15 10fc:40a0
-
-   * - 6
-     - Yuan PG600, Diamond PVR-550
-     - IVTV16 ff92:0070, IVTV16 ffab:0600
-
-   * - 7
-     - Adaptec VideOh! AVC-2410
-     - IVTV16 9005:0093
-
-   * - 8
-     - Adaptec VideOh! AVC-2010
-     - IVTV16 9005:0092
-
-   * - 9
-     - Nagase Transgear 5000TV
-     - IVTV16 1461:bfff
-
-   * - 10
-     - AOpen VA2000MAX-SNT6
-     - IVTV16 0000:ff5f
-
-   * - 11
-     - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP
-     - IVTV16 12ab:0600, IVTV16 fbab:0600, IVTV16 1154:0523
-
-   * - 12
-     - I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner)
-     - IVTV16 10fc:d01e, IVTV16 10fc:d038, IVTV16 10fc:d039
-
-   * - 13
-     - I/O Data GV-MVP/RX2E
-     - IVTV16 10fc:d025
-
-   * - 14
-     - GotView PCI DVD
-     - IVTV16 12ab:0600
-
-   * - 15
-     - GotView PCI DVD2 Deluxe
-     - IVTV16 ffac:0600
-
-   * - 16
-     - Yuan MPC622
-     - IVTV16 ff01:d998
-
-   * - 17
-     - Digital Cowboy DCT-MTVP1
-     - IVTV16 1461:bfff
-
-   * - 18
-     - Yuan PG600-2, GotView PCI DVD Lite
-     - IVTV16 ffab:0600, IVTV16 ffad:0600
-
-   * - 19
-     - Club3D ZAP-TV1x01
-     - IVTV16 ffab:0600
-
-   * - 20
-     - AVerTV MCE 116 Plus
-     - IVTV16 1461:c439
-
-   * - 21
-     - ASUS Falcon2
-     - IVTV16 1043:4b66, IVTV16 1043:462e, IVTV16 1043:4b2e
-
-   * - 22
-     - AVerMedia PVR-150 Plus / AVerTV M113 Partsnic (Daewoo) Tuner
-     - IVTV16 1461:c034, IVTV16 1461:c035
-
-   * - 23
-     - AVerMedia EZMaker PCI Deluxe
-     - IVTV16 1461:c03f
-
-   * - 24
-     - AVerMedia M104
-     - IVTV16 1461:c136
-
-   * - 25
-     - Buffalo PC-MV5L/PCI
-     - IVTV16 1154:052b
-
-   * - 26
-     - AVerMedia UltraTV 1500 MCE / AVerTV M113 Philips Tuner
-     - IVTV16 1461:c019, IVTV16 1461:c01b
-
-   * - 27
-     - Sony VAIO Giga Pocket (ENX Kikyou)
-     - IVTV16 104d:813d
-
-   * - 28
-     - Hauppauge WinTV PVR-350 (V1)
-     - IVTV16 104d:813d
-
-   * - 29
-     - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR)
-     - IVTV16 104d:813d
-
-   * - 30
-     - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR/YCS)
-     - IVTV16 104d:813d
diff --git a/Documentation/media/v4l-drivers/ivtv.rst b/Documentation/media/v4l-drivers/ivtv.rst
deleted file mode 100644
index 7b8775d20214..000000000000
--- a/Documentation/media/v4l-drivers/ivtv.rst
+++ /dev/null
@@ -1,218 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The ivtv driver
-===============
-
-Author: Hans Verkuil <hverkuil@xs4all.nl>
-
-This is a v4l2 device driver for the Conexant cx23415/6 MPEG encoder/decoder.
-The cx23415 can do both encoding and decoding, the cx23416 can only do MPEG
-encoding. Currently the only card featuring full decoding support is the
-Hauppauge PVR-350.
-
-.. note::
-
-   #) This driver requires the latest encoder firmware (version 2.06.039, size
-      376836 bytes). Get the firmware from here:
-
-      https://linuxtv.org/downloads/firmware/#conexant
-
-   #) 'normal' TV applications do not work with this driver, you need
-      an application that can handle MPEG input such as mplayer, xine, MythTV,
-      etc.
-
-The primary goal of the IVTV project is to provide a "clean room" Linux
-Open Source driver implementation for video capture cards based on the
-iCompression iTVC15 or Conexant CX23415/CX23416 MPEG Codec.
-
-Features
---------
-
- * Hardware mpeg2 capture of broadcast video (and sound) via the tuner or
-   S-Video/Composite and audio line-in.
- * Hardware mpeg2 capture of FM radio where hardware support exists
- * Supports NTSC, PAL, SECAM with stereo sound
- * Supports SAP and bilingual transmissions.
- * Supports raw VBI (closed captions and teletext).
- * Supports sliced VBI (closed captions and teletext) and is able to insert
-   this into the captured MPEG stream.
- * Supports raw YUV and PCM input.
-
-Additional features for the PVR-350 (CX23415 based)
----------------------------------------------------
-
- * Provides hardware mpeg2 playback
- * Provides comprehensive OSD (On Screen Display: ie. graphics overlaying the
-   video signal)
- * Provides a framebuffer (allowing X applications to appear on the video
-   device)
- * Supports raw YUV output.
-
-IMPORTANT: In case of problems first read this page:
-	https://help.ubuntu.com/community/Install_IVTV_Troubleshooting
-
-See also
---------
-
-https://linuxtv.org
-
-IRC
----
-
-irc://irc.freenode.net/#v4l
-
-----------------------------------------------------------
-
-Devices
--------
-
-A maximum of 12 ivtv boards are allowed at the moment.
-
-Cards that don't have a video output capability (i.e. non PVR350 cards)
-lack the vbi8, vbi16, video16 and video48 devices. They also do not
-support the framebuffer device /dev/fbx for OSD.
-
-The radio0 device may or may not be present, depending on whether the
-card has a radio tuner or not.
-
-Here is a list of the base v4l devices:
-
-.. code-block:: none
-
-	crw-rw----    1 root     video     81,   0 Jun 19 22:22 /dev/video0
-	crw-rw----    1 root     video     81,  16 Jun 19 22:22 /dev/video16
-	crw-rw----    1 root     video     81,  24 Jun 19 22:22 /dev/video24
-	crw-rw----    1 root     video     81,  32 Jun 19 22:22 /dev/video32
-	crw-rw----    1 root     video     81,  48 Jun 19 22:22 /dev/video48
-	crw-rw----    1 root     video     81,  64 Jun 19 22:22 /dev/radio0
-	crw-rw----    1 root     video     81, 224 Jun 19 22:22 /dev/vbi0
-	crw-rw----    1 root     video     81, 228 Jun 19 22:22 /dev/vbi8
-	crw-rw----    1 root     video     81, 232 Jun 19 22:22 /dev/vbi16
-
-Base devices
-------------
-
-For every extra card you have the numbers increased by one. For example,
-/dev/video0 is listed as the 'base' encoding capture device so we have:
-
-- /dev/video0  is the encoding capture device for the first card (card 0)
-- /dev/video1  is the encoding capture device for the second card (card 1)
-- /dev/video2  is the encoding capture device for the third card (card 2)
-
-Note that if the first card doesn't have a feature (eg no decoder, so no
-video16, the second card will still use video17. The simple rule is 'add
-the card number to the base device number'. If you have other capture
-cards (e.g. WinTV PCI) that are detected first, then you have to tell
-the ivtv module about it so that it will start counting at 1 (or 2, or
-whatever). Otherwise the device numbers can get confusing. The ivtv
-'ivtv_first_minor' module option can be used for that.
-
-
-- /dev/video0
-
-  The encoding capture device(s).
-
-  Read-only.
-
-  Reading from this device gets you the MPEG1/2 program stream.
-  Example:
-
-  .. code-block:: none
-
-	cat /dev/video0 > my.mpg (you need to hit ctrl-c to exit)
-
-
-- /dev/video16
-
-  The decoder output device(s)
-
-  Write-only. Only present if the MPEG decoder (i.e. CX23415) exists.
-
-  An mpeg2 stream sent to this device will appear on the selected video
-  display, audio will appear on the line-out/audio out.  It is only
-  available for cards that support video out. Example:
-
-  .. code-block:: none
-
-	cat my.mpg >/dev/video16
-
-
-- /dev/video24
-
-  The raw audio capture device(s).
-
-  Read-only
-
-  The raw audio PCM stereo stream from the currently selected
-  tuner or audio line-in.  Reading from this device results in a raw
-  (signed 16 bit Little Endian, 48000 Hz, stereo pcm) capture.
-  This device only captures audio. This should be replaced by an ALSA
-  device in the future.
-  Note that there is no corresponding raw audio output device, this is
-  not supported in the decoder firmware.
-
-
-- /dev/video32
-
-  The raw video capture device(s)
-
-  Read-only
-
-  The raw YUV video output from the current video input. The YUV format
-  is non-standard (V4L2_PIX_FMT_HM12).
-
-  Note that the YUV and PCM streams are not synchronized, so they are of
-  limited use.
-
-
-- /dev/video48
-
-  The raw video display device(s)
-
-  Write-only. Only present if the MPEG decoder (i.e. CX23415) exists.
-
-  Writes a YUV stream to the decoder of the card.
-
-
-- /dev/radio0
-
-  The radio tuner device(s)
-
-  Cannot be read or written.
-
-  Used to enable the radio tuner and tune to a frequency. You cannot
-  read or write audio streams with this device.  Once you use this
-  device to tune the radio, use /dev/video24 to read the raw pcm stream
-  or /dev/video0 to get an mpeg2 stream with black video.
-
-
-- /dev/vbi0
-
-  The 'vertical blank interval' (Teletext, CC, WSS etc) capture device(s)
-
-  Read-only
-
-  Captures the raw (or sliced) video data sent during the Vertical Blank
-  Interval. This data is used to encode teletext, closed captions, VPS,
-  widescreen signalling, electronic program guide information, and other
-  services.
-
-
-- /dev/vbi8
-
-  Processed vbi feedback device(s)
-
-  Read-only. Only present if the MPEG decoder (i.e. CX23415) exists.
-
-  The sliced VBI data embedded in an MPEG stream is reproduced on this
-  device. So while playing back a recording on /dev/video16, you can
-  read the embedded VBI data from /dev/vbi8.
-
-
-- /dev/vbi16
-
-  The vbi 'display' device(s)
-
-  Write-only. Only present if the MPEG decoder (i.e. CX23415) exists.
-
-  Can be used to send sliced VBI data to the video-out connector.
diff --git a/Documentation/media/v4l-drivers/max2175.rst b/Documentation/media/v4l-drivers/max2175.rst
deleted file mode 100644
index a5e35059d98d..000000000000
--- a/Documentation/media/v4l-drivers/max2175.rst
+++ /dev/null
@@ -1,64 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Maxim Integrated MAX2175 RF to bits tuner driver
-================================================
-
-The MAX2175 driver implements the following driver-specific controls:
-
-``V4L2_CID_MAX2175_I2S_ENABLE``
--------------------------------
-    Enable/Disable I2S output of the tuner. This is a private control
-    that can be accessed only using the subdev interface.
-    Refer to Documentation/media/kapi/v4l2-controls.rst for more details.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 4
-
-    * - ``(0)``
-      - I2S output is disabled.
-    * - ``(1)``
-      - I2S output is enabled.
-
-``V4L2_CID_MAX2175_HSLS``
--------------------------
-    The high-side/low-side (HSLS) control of the tuner for a given band.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 4
-
-    * - ``(0)``
-      - The LO frequency position is below the desired frequency.
-    * - ``(1)``
-      - The LO frequency position is above the desired frequency.
-
-``V4L2_CID_MAX2175_RX_MODE (menu)``
------------------------------------
-    The Rx mode controls a number of preset parameters of the tuner like
-    sample clock (sck), sampling rate etc. These multiple settings are
-    provided under one single label called Rx mode in the datasheet. The
-    list below shows the supported modes with a brief description.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 4
-
-    * - ``"Europe modes"``
-    * - ``"FM 1.2" (0)``
-      - This configures FM band with a sample rate of 0.512 million
-        samples/sec with a 10.24 MHz sck.
-    * - ``"DAB 1.2" (1)``
-      - This configures VHF band with a sample rate of 2.048 million
-        samples/sec with a 32.768 MHz sck.
-
-    * - ``"North America modes"``
-    * - ``"FM 1.0" (0)``
-      - This configures FM band with a sample rate of 0.7441875 million
-        samples/sec with a 14.88375 MHz sck.
-    * - ``"DAB 1.2" (1)``
-      - This configures FM band with a sample rate of 0.372 million
-        samples/sec with a 7.441875 MHz sck.
diff --git a/Documentation/media/v4l-drivers/meye.rst b/Documentation/media/v4l-drivers/meye.rst
deleted file mode 100644
index dc57a6a91b43..000000000000
--- a/Documentation/media/v4l-drivers/meye.rst
+++ /dev/null
@@ -1,134 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-Vaio Picturebook Motion Eye Camera Driver
-=========================================
-
-Copyright |copy| 2001-2004 Stelian Pop <stelian@popies.net>
-
-Copyright |copy| 2001-2002 Alcôve <www.alcove.com>
-
-Copyright |copy| 2000 Andrew Tridgell <tridge@samba.org>
-
-This driver enable the use of video4linux compatible applications with the
-Motion Eye camera. This driver requires the "Sony Laptop Extras" driver (which
-can be found in the "Misc devices" section of the kernel configuration utility)
-to be compiled and installed (using its "camera=1" parameter).
-
-It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480.
-
-Grabbing is supported in packed YUV colorspace only.
-
-MJPEG hardware grabbing is supported via a private API (see below).
-
-Hardware supported
-------------------
-
-This driver supports the 'second' version of the MotionEye camera :)
-
-The first version was connected directly on the video bus of the Neomagic
-video card and is unsupported.
-
-The second one, made by Kawasaki Steel is fully supported by this
-driver (PCI vendor/device is 0x136b/0xff01)
-
-The third one, present in recent (more or less last year) Picturebooks
-(C1M* models), is not supported. The manufacturer has given the specs
-to the developers under a NDA (which allows the development of a GPL
-driver however), but things are not moving very fast (see
-http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011).
-
-There is a forth model connected on the USB bus in TR1* Vaio laptops.
-This camera is not supported at all by the current driver, in fact
-little information if any is available for this camera
-(USB vendor/device is 0x054c/0x0107).
-
-Driver options
---------------
-
-Several options can be passed to the meye driver using the standard
-module argument syntax (<param>=<value> when passing the option to the
-module or meye.<param>=<value> on the kernel boot line when meye is
-statically linked into the kernel). Those options are:
-
-.. code-block:: none
-
-	gbuffers:	number of capture buffers, default is 2 (32 max)
-
-	gbufsize:	size of each capture buffer, default is 614400
-
-	video_nr:	video device to register (0 = /dev/video0, etc)
-
-Module use
-----------
-
-In order to automatically load the meye module on use, you can put those lines
-in your /etc/modprobe.d/meye.conf file:
-
-.. code-block:: none
-
-	alias char-major-81 videodev
-	alias char-major-81-0 meye
-	options meye gbuffers=32
-
-Usage:
-------
-
-.. code-block:: none
-
-	xawtv >= 3.49 (<http://bytesex.org/xawtv/>)
-		for display and uncompressed video capture:
-
-			xawtv -c /dev/video0 -geometry 640x480
-				or
-			xawtv -c /dev/video0 -geometry 320x240
-
-	motioneye (<http://popies.net/meye/>)
-		for getting ppm or jpg snapshots, mjpeg video
-
-Private API
------------
-
-The driver supports frame grabbing with the video4linux API,
-so all video4linux tools (like xawtv) should work with this driver.
-
-Besides the video4linux interface, the driver has a private interface
-for accessing the Motion Eye extended parameters (camera sharpness,
-agc, video framerate), the snapshot and the MJPEG capture facilities.
-
-This interface consists of several ioctls (prototypes and structures
-can be found in include/linux/meye.h):
-
-MEYEIOC_G_PARAMS and MEYEIOC_S_PARAMS
-	Get and set the extended parameters of the motion eye camera.
-	The user should always query the current parameters with
-	MEYEIOC_G_PARAMS, change what he likes and then issue the
-	MEYEIOC_S_PARAMS call (checking for -EINVAL). The extended
-	parameters are described by the meye_params structure.
-
-
-MEYEIOC_QBUF_CAPT
-	Queue a buffer for capture (the buffers must have been
-	obtained with a VIDIOCGMBUF call and mmap'ed by the
-	application). The argument to MEYEIOC_QBUF_CAPT is the
-	buffer number to queue (or -1 to end capture). The first
-	call to MEYEIOC_QBUF_CAPT starts the streaming capture.
-
-MEYEIOC_SYNC
-	Takes as an argument the buffer number you want to sync.
-	This ioctl blocks until the buffer is filled and ready
-	for the application to use. It returns the buffer size.
-
-MEYEIOC_STILLCAPT and MEYEIOC_STILLJCAPT
-	Takes a snapshot in an uncompressed or compressed jpeg format.
-	This ioctl blocks until the snapshot is done and returns (for
-	jpeg snapshot) the size of the image. The image data is
-	available from the first mmap'ed buffer.
-
-Look at the 'motioneye' application code for an actual example.
-
-Bugs / Todo
------------
-
-- 'motioneye' still uses the meye private v4l1 API extensions.
diff --git a/Documentation/media/v4l-drivers/omap3isp.rst b/Documentation/media/v4l-drivers/omap3isp.rst
deleted file mode 100644
index 8974c444e3a1..000000000000
--- a/Documentation/media/v4l-drivers/omap3isp.rst
+++ /dev/null
@@ -1,284 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-OMAP 3 Image Signal Processor (ISP) driver
-==========================================
-
-Copyright |copy| 2010 Nokia Corporation
-
-Copyright |copy| 2009 Texas Instruments, Inc.
-
-Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
-Sakari Ailus <sakari.ailus@iki.fi>, David Cohen <dacohen@gmail.com>
-
-
-Introduction
-------------
-
-This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP)
-driver located under drivers/media/platform/omap3isp. The original driver was
-written by Texas Instruments but since that it has been rewritten (twice) at
-Nokia.
-
-The driver has been successfully used on the following versions of OMAP 3:
-
-- 3430
-- 3530
-- 3630
-
-The driver implements V4L2, Media controller and v4l2_subdev interfaces.
-Sensor, lens and flash drivers using the v4l2_subdev interface in the kernel
-are supported.
-
-
-Split to subdevs
-----------------
-
-The OMAP 3 ISP is split into V4L2 subdevs, each of the blocks inside the ISP
-having one subdev to represent it. Each of the subdevs provide a V4L2 subdev
-interface to userspace.
-
-- OMAP3 ISP CCP2
-- OMAP3 ISP CSI2a
-- OMAP3 ISP CCDC
-- OMAP3 ISP preview
-- OMAP3 ISP resizer
-- OMAP3 ISP AEWB
-- OMAP3 ISP AF
-- OMAP3 ISP histogram
-
-Each possible link in the ISP is modelled by a link in the Media controller
-interface. For an example program see [#f2]_.
-
-
-Controlling the OMAP 3 ISP
---------------------------
-
-In general, the settings given to the OMAP 3 ISP take effect at the beginning
-of the following frame. This is done when the module becomes idle during the
-vertical blanking period on the sensor. In memory-to-memory operation the pipe
-is run one frame at a time. Applying the settings is done between the frames.
-
-All the blocks in the ISP, excluding the CSI-2 and possibly the CCP2 receiver,
-insist on receiving complete frames. Sensors must thus never send the ISP
-partial frames.
-
-Autoidle does have issues with some ISP blocks on the 3430, at least.
-Autoidle is only enabled on 3630 when the omap3isp module parameter autoidle
-is non-zero.
-
-
-Events
-------
-
-The OMAP 3 ISP driver does support the V4L2 event interface on CCDC and
-statistics (AEWB, AF and histogram) subdevs.
-
-The CCDC subdev produces V4L2_EVENT_FRAME_SYNC type event on HS_VS
-interrupt which is used to signal frame start. Earlier version of this
-driver used V4L2_EVENT_OMAP3ISP_HS_VS for this purpose. The event is
-triggered exactly when the reception of the first line of the frame starts
-in the CCDC module. The event can be subscribed on the CCDC subdev.
-
-(When using parallel interface one must pay account to correct configuration
-of the VS signal polarity. This is automatically correct when using the serial
-receivers.)
-
-Each of the statistics subdevs is able to produce events. An event is
-generated whenever a statistics buffer can be dequeued by a user space
-application using the VIDIOC_OMAP3ISP_STAT_REQ IOCTL. The events available
-are:
-
-- V4L2_EVENT_OMAP3ISP_AEWB
-- V4L2_EVENT_OMAP3ISP_AF
-- V4L2_EVENT_OMAP3ISP_HIST
-
-The type of the event data is struct omap3isp_stat_event_status for these
-ioctls. If there is an error calculating the statistics, there will be an
-event as usual, but no related statistics buffer. In this case
-omap3isp_stat_event_status.buf_err is set to non-zero.
-
-
-Private IOCTLs
---------------
-
-The OMAP 3 ISP driver supports standard V4L2 IOCTLs and controls where
-possible and practical. Much of the functions provided by the ISP, however,
-does not fall under the standard IOCTLs --- gamma tables and configuration of
-statistics collection are examples of such.
-
-In general, there is a private ioctl for configuring each of the blocks
-containing hardware-dependent functions.
-
-The following private IOCTLs are supported:
-
-- VIDIOC_OMAP3ISP_CCDC_CFG
-- VIDIOC_OMAP3ISP_PRV_CFG
-- VIDIOC_OMAP3ISP_AEWB_CFG
-- VIDIOC_OMAP3ISP_HIST_CFG
-- VIDIOC_OMAP3ISP_AF_CFG
-- VIDIOC_OMAP3ISP_STAT_REQ
-- VIDIOC_OMAP3ISP_STAT_EN
-
-The parameter structures used by these ioctls are described in
-include/linux/omap3isp.h. The detailed functions of the ISP itself related to
-a given ISP block is described in the Technical Reference Manuals (TRMs) ---
-see the end of the document for those.
-
-While it is possible to use the ISP driver without any use of these private
-IOCTLs it is not possible to obtain optimal image quality this way. The AEWB,
-AF and histogram modules cannot be used without configuring them using the
-appropriate private IOCTLs.
-
-
-CCDC and preview block IOCTLs
------------------------------
-
-The VIDIOC_OMAP3ISP_CCDC_CFG and VIDIOC_OMAP3ISP_PRV_CFG IOCTLs are used to
-configure, enable and disable functions in the CCDC and preview blocks,
-respectively. Both IOCTLs control several functions in the blocks they
-control. VIDIOC_OMAP3ISP_CCDC_CFG IOCTL accepts a pointer to struct
-omap3isp_ccdc_update_config as its argument. Similarly VIDIOC_OMAP3ISP_PRV_CFG
-accepts a pointer to struct omap3isp_prev_update_config. The definition of
-both structures is available in [#f1]_.
-
-The update field in the structures tells whether to update the configuration
-for the specific function and the flag tells whether to enable or disable the
-function.
-
-The update and flag bit masks accept the following values. Each separate
-functions in the CCDC and preview blocks is associated with a flag (either
-disable or enable; part of the flag field in the structure) and a pointer to
-configuration data for the function.
-
-Valid values for the update and flag fields are listed here for
-VIDIOC_OMAP3ISP_CCDC_CFG. Values may be or'ed to configure more than one
-function in the same IOCTL call.
-
-- OMAP3ISP_CCDC_ALAW
-- OMAP3ISP_CCDC_LPF
-- OMAP3ISP_CCDC_BLCLAMP
-- OMAP3ISP_CCDC_BCOMP
-- OMAP3ISP_CCDC_FPC
-- OMAP3ISP_CCDC_CULL
-- OMAP3ISP_CCDC_CONFIG_LSC
-- OMAP3ISP_CCDC_TBL_LSC
-
-The corresponding values for the VIDIOC_OMAP3ISP_PRV_CFG are here:
-
-- OMAP3ISP_PREV_LUMAENH
-- OMAP3ISP_PREV_INVALAW
-- OMAP3ISP_PREV_HRZ_MED
-- OMAP3ISP_PREV_CFA
-- OMAP3ISP_PREV_CHROMA_SUPP
-- OMAP3ISP_PREV_WB
-- OMAP3ISP_PREV_BLKADJ
-- OMAP3ISP_PREV_RGB2RGB
-- OMAP3ISP_PREV_COLOR_CONV
-- OMAP3ISP_PREV_YC_LIMIT
-- OMAP3ISP_PREV_DEFECT_COR
-- OMAP3ISP_PREV_GAMMABYPASS
-- OMAP3ISP_PREV_DRK_FRM_CAPTURE
-- OMAP3ISP_PREV_DRK_FRM_SUBTRACT
-- OMAP3ISP_PREV_LENS_SHADING
-- OMAP3ISP_PREV_NF
-- OMAP3ISP_PREV_GAMMA
-
-The associated configuration pointer for the function may not be NULL when
-enabling the function. When disabling a function the configuration pointer is
-ignored.
-
-
-Statistic blocks IOCTLs
------------------------
-
-The statistics subdevs do offer more dynamic configuration options than the
-other subdevs. They can be enabled, disable and reconfigured when the pipeline
-is in streaming state.
-
-The statistics blocks always get the input image data from the CCDC (as the
-histogram memory read isn't implemented). The statistics are dequeueable by
-the user from the statistics subdev nodes using private IOCTLs.
-
-The private IOCTLs offered by the AEWB, AF and histogram subdevs are heavily
-reflected by the register level interface offered by the ISP hardware. There
-are aspects that are purely related to the driver implementation and these are
-discussed next.
-
-VIDIOC_OMAP3ISP_STAT_EN
------------------------
-
-This private IOCTL enables/disables a statistic module. If this request is
-done before streaming, it will take effect as soon as the pipeline starts to
-stream.  If the pipeline is already streaming, it will take effect as soon as
-the CCDC becomes idle.
-
-VIDIOC_OMAP3ISP_AEWB_CFG, VIDIOC_OMAP3ISP_HIST_CFG and VIDIOC_OMAP3ISP_AF_CFG
------------------------------------------------------------------------------
-
-Those IOCTLs are used to configure the modules. They require user applications
-to have an in-depth knowledge of the hardware. Most of the fields explanation
-can be found on OMAP's TRMs. The two following fields common to all the above
-configure private IOCTLs require explanation for better understanding as they
-are not part of the TRM.
-
-omap3isp_[h3a_af/h3a_aewb/hist]\_config.buf_size:
-
-The modules handle their buffers internally. The necessary buffer size for the
-module's data output depends on the requested configuration. Although the
-driver supports reconfiguration while streaming, it does not support a
-reconfiguration which requires bigger buffer size than what is already
-internally allocated if the module is enabled. It will return -EBUSY on this
-case. In order to avoid such condition, either disable/reconfigure/enable the
-module or request the necessary buffer size during the first configuration
-while the module is disabled.
-
-The internal buffer size allocation considers the requested configuration's
-minimum buffer size and the value set on buf_size field. If buf_size field is
-out of [minimum, maximum] buffer size range, it's clamped to fit in there.
-The driver then selects the biggest value. The corrected buf_size value is
-written back to user application.
-
-omap3isp_[h3a_af/h3a_aewb/hist]\_config.config_counter:
-
-As the configuration doesn't take effect synchronously to the request, the
-driver must provide a way to track this information to provide more accurate
-data. After a configuration is requested, the config_counter returned to user
-space application will be an unique value associated to that request. When
-user application receives an event for buffer availability or when a new
-buffer is requested, this config_counter is used to match a buffer data and a
-configuration.
-
-VIDIOC_OMAP3ISP_STAT_REQ
-------------------------
-
-Send to user space the oldest data available in the internal buffer queue and
-discards such buffer afterwards. The field omap3isp_stat_data.frame_number
-matches with the video buffer's field_count.
-
-
-Technical reference manuals (TRMs) and other documentation
-----------------------------------------------------------
-
-OMAP 3430 TRM:
-<URL:http://focus.ti.com/pdfs/wtbu/OMAP34xx_ES3.1.x_PUBLIC_TRM_vZM.zip>
-Referenced 2011-03-05.
-
-OMAP 35xx TRM:
-<URL:http://www.ti.com/litv/pdf/spruf98o> Referenced 2011-03-05.
-
-OMAP 3630 TRM:
-<URL:http://focus.ti.com/pdfs/wtbu/OMAP36xx_ES1.x_PUBLIC_TRM_vQ.zip>
-Referenced 2011-03-05.
-
-DM 3730 TRM:
-<URL:http://www.ti.com/litv/pdf/sprugn4h> Referenced 2011-03-06.
-
-
-References
-----------
-
-.. [#f1] include/linux/omap3isp.h
-
-.. [#f2] http://git.ideasonboard.org/?p=media-ctl.git;a=summary
diff --git a/Documentation/media/v4l-drivers/omap4_camera.rst b/Documentation/media/v4l-drivers/omap4_camera.rst
deleted file mode 100644
index 24db4222d36d..000000000000
--- a/Documentation/media/v4l-drivers/omap4_camera.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-OMAP4 ISS Driver
-================
-
-Author: Sergio Aguirre <sergio.a.aguirre@gmail.com>
-
-Copyright (C) 2012, Texas Instruments
-
-Introduction
-------------
-
-The OMAP44XX family of chips contains the Imaging SubSystem (a.k.a. ISS),
-Which contains several components that can be categorized in 3 big groups:
-
-- Interfaces (2 Interfaces: CSI2-A & CSI2-B/CCP2)
-- ISP (Image Signal Processor)
-- SIMCOP (Still Image Coprocessor)
-
-For more information, please look in [#f1]_ for latest version of:
-"OMAP4430 Multimedia Device Silicon Revision 2.x"
-
-As of Revision AB, the ISS is described in detail in section 8.
-
-This driver is supporting **only** the CSI2-A/B interfaces for now.
-
-It makes use of the Media Controller framework [#f2]_, and inherited most of the
-code from OMAP3 ISP driver (found under drivers/media/platform/omap3isp/\*),
-except that it doesn't need an IOMMU now for ISS buffers memory mapping.
-
-Supports usage of MMAP buffers only (for now).
-
-Tested platforms
-----------------
-
-- OMAP4430SDP, w/ ES2.1 GP & SEVM4430-CAM-V1-0 (Contains IMX060 & OV5640, in
-  which only the last one is supported, outputting YUV422 frames).
-
-- TI Blaze MDP, w/ OMAP4430 ES2.2 EMU (Contains 1 IMX060 & 2 OV5650 sensors, in
-  which only the OV5650 are supported, outputting RAW10 frames).
-
-- PandaBoard, Rev. A2, w/ OMAP4430 ES2.1 GP & OV adapter board, tested with
-  following sensors:
-  * OV5640
-  * OV5650
-
-- Tested on mainline kernel:
-
-	http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=summary
-
-  Tag: v3.3 (commit c16fa4f2ad19908a47c63d8fa436a1178438c7e7)
-
-File list
----------
-drivers/staging/media/omap4iss/
-include/linux/platform_data/media/omap4iss.h
-
-References
-----------
-
-.. [#f1] http://focus.ti.com/general/docs/wtbu/wtbudocumentcenter.tsp?navigationId=12037&templateId=6123#62
-.. [#f2] http://lwn.net/Articles/420485/
diff --git a/Documentation/media/v4l-drivers/philips.rst b/Documentation/media/v4l-drivers/philips.rst
deleted file mode 100644
index e2840be10d08..000000000000
--- a/Documentation/media/v4l-drivers/philips.rst
+++ /dev/null
@@ -1,247 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Philips webcams (pwc driver)
-============================
-
-This file contains some additional information for the Philips and OEM webcams.
-E-mail: webcam@smcc.demon.nl                        Last updated: 2004-01-19
-Site: http://www.smcc.demon.nl/webcam/
-
-As of this moment, the following cameras are supported:
-
- * Philips PCA645
- * Philips PCA646
- * Philips PCVC675
- * Philips PCVC680
- * Philips PCVC690
- * Philips PCVC720/40
- * Philips PCVC730
- * Philips PCVC740
- * Philips PCVC750
- * Askey VC010
- * Creative Labs Webcam 5
- * Creative Labs Webcam Pro Ex
- * Logitech QuickCam 3000 Pro
- * Logitech QuickCam 4000 Pro
- * Logitech QuickCam Notebook Pro
- * Logitech QuickCam Zoom
- * Logitech QuickCam Orbit
- * Logitech QuickCam Sphere
- * Samsung MPC-C10
- * Samsung MPC-C30
- * Sotec Afina Eye
- * AME CU-001
- * Visionite VCS-UM100
- * Visionite VCS-UC300
-
-The main webpage for the Philips driver is at the address above. It contains
-a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin
-contains decompression routines that allow you to use higher image sizes and
-framerates; in addition the webcam uses less bandwidth on the USB bus (handy
-if you want to run more than 1 camera simultaneously). These routines fall
-under a NDA, and may therefore not be distributed as source; however, its use
-is completely optional.
-
-You can build this code either into your kernel, or as a module. I recommend
-the latter, since it makes troubleshooting a lot easier. The built-in
-microphone is supported through the USB Audio class.
-
-When you load the module you can set some default settings for the
-camera; some programs depend on a particular image-size or -format and
-don't know how to set it properly in the driver. The options are:
-
-size
-   Can be one of 'sqcif', 'qsif', 'qcif', 'sif', 'cif' or
-   'vga', for an image size of resp. 128x96, 160x120, 176x144,
-   320x240, 352x288 and 640x480 (of course, only for those cameras that
-   support these resolutions).
-
-fps
-   Specifies the desired framerate. Is an integer in the range of 4-30.
-
-fbufs
-   This parameter specifies the number of internal buffers to use for storing
-   frames from the cam. This will help if the process that reads images from
-   the cam is a bit slow or momentarily busy. However, on slow machines it
-   only introduces lag, so choose carefully. The default is 3, which is
-   reasonable. You can set it between 2 and 5.
-
-mbufs
-   This is an integer between 1 and 10. It will tell the module the number of
-   buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends.
-   The default is 2, which is adequate for most applications (double
-   buffering).
-
-   Should you experience a lot of 'Dumping frame...' messages during
-   grabbing with a tool that uses mmap(), you might want to increase if.
-   However, it doesn't really buffer images, it just gives you a bit more
-   slack when your program is behind. But you need a multi-threaded or
-   forked program to really take advantage of these buffers.
-
-   The absolute maximum is 10, but don't set it too high!  Every buffer takes
-   up 460 KB of RAM, so unless you have a lot of memory setting this to
-   something more than 4 is an absolute waste.  This memory is only
-   allocated during open(), so nothing is wasted when the camera is not in
-   use.
-
-power_save
-   When power_save is enabled (set to 1), the module will try to shut down
-   the cam on close() and re-activate on open(). This will save power and
-   turn off the LED. Not all cameras support this though (the 645 and 646
-   don't have power saving at all), and some models don't work either (they
-   will shut down, but never wake up). Consider this experimental. By
-   default this option is disabled.
-
-compression (only useful with the plugin)
-   With this option you can control the compression factor that the camera
-   uses to squeeze the image through the USB bus. You can set the
-   parameter between 0 and 3::
-
-     0 = prefer uncompressed images; if the requested mode is not available
-	 in an uncompressed format, the driver will silently switch to low
-	 compression.
-     1 = low compression.
-     2 = medium compression.
-     3 = high compression.
-
-   High compression takes less bandwidth of course, but it could also
-   introduce some unwanted artefacts. The default is 2, medium compression.
-   See the FAQ on the website for an overview of which modes require
-   compression.
-
-   The compression parameter does not apply to the 645 and 646 cameras
-   and OEM models derived from those (only a few). Most cams honour this
-   parameter.
-
-leds
-   This settings takes 2 integers, that define the on/off time for the LED
-   (in milliseconds). One of the interesting things that you can do with
-   this is let the LED blink while the camera is in use. This::
-
-     leds=500,500
-
-   will blink the LED once every second. But with::
-
-     leds=0,0
-
-   the LED never goes on, making it suitable for silent surveillance.
-
-   By default the camera's LED is on solid while in use, and turned off
-   when the camera is not used anymore.
-
-   This parameter works only with the ToUCam range of cameras (720, 730, 740,
-   750) and OEMs. For other cameras this command is silently ignored, and
-   the LED cannot be controlled.
-
-   Finally: this parameters does not take effect UNTIL the first time you
-   open the camera device. Until then, the LED remains on.
-
-dev_hint
-   A long standing problem with USB devices is their dynamic nature: you
-   never know what device a camera gets assigned; it depends on module load
-   order, the hub configuration, the order in which devices are plugged in,
-   and the phase of the moon (i.e. it can be random). With this option you
-   can give the driver a hint as to what video device node (/dev/videoX) it
-   should use with a specific camera. This is also handy if you have two
-   cameras of the same model.
-
-   A camera is specified by its type (the number from the camera model,
-   like PCA645, PCVC750VC, etc) and optionally the serial number (visible
-   in /sys/kernel/debug/usb/devices). A hint consists of a string with the
-   following format::
-
-      [type[.serialnumber]:]node
-
-   The square brackets mean that both the type and the serialnumber are
-   optional, but a serialnumber cannot be specified without a type (which
-   would be rather pointless). The serialnumber is separated from the type
-   by a '.'; the node number by a ':'.
-
-   This somewhat cryptic syntax is best explained by a few examples::
-
-     dev_hint=3,5              The first detected cam gets assigned
-			       /dev/video3, the second /dev/video5. Any
-			       other cameras will get the first free
-			       available slot (see below).
-
-     dev_hint=645:1,680:2      The PCA645 camera will get /dev/video1,
-			       and a PCVC680 /dev/video2.
-
-     dev_hint=645.0123:3,645.4567:0	The PCA645 camera with serialnumber
-					0123 goes to /dev/video3, the same
-					camera model with the 4567 serial
-					gets /dev/video0.
-
-     dev_hint=750:1,4,5,6       The PCVC750 camera will get /dev/video1, the
-				next 3 Philips cams will use /dev/video4
-				through /dev/video6.
-
-   Some points worth knowing:
-
-   - Serialnumbers are case sensitive and must be written full, including
-     leading zeroes (it's treated as a string).
-   - If a device node is already occupied, registration will fail and
-     the webcam is not available.
-   - You can have up to 64 video devices; be sure to make enough device
-     nodes in /dev if you want to spread the numbers.
-     After /dev/video9 comes /dev/video10 (not /dev/videoA).
-   - If a camera does not match any dev_hint, it will simply get assigned
-     the first available device node, just as it used to be.
-
-trace
-   In order to better detect problems, it is now possible to turn on a
-   'trace' of some of the calls the module makes; it logs all items in your
-   kernel log at debug level.
-
-   The trace variable is a bitmask; each bit represents a certain feature.
-   If you want to trace something, look up the bit value(s) in the table
-   below, add the values together and supply that to the trace variable.
-
-   ====== ======= ================================================ =======
-   Value  Value   Description					   Default
-   (dec)  (hex)
-   ====== ======= ================================================ =======
-       1    0x1   Module initialization; this will log messages       On
-		  while loading and unloading the module
-
-       2    0x2   probe() and disconnect() traces                     On
-
-       4    0x4   Trace open() and close() calls                      Off
-
-       8    0x8   read(), mmap() and associated ioctl() calls         Off
-
-      16   0x10   Memory allocation of buffers, etc.                  Off
-
-      32   0x20   Showing underflow, overflow and Dumping frame       On
-		  messages
-
-      64   0x40   Show viewport and image sizes                       Off
-
-     128   0x80   PWCX debugging                                      Off
-   ====== ======= ================================================ =======
-
-   For example, to trace the open() & read() functions, sum 8 + 4 = 12,
-   so you would supply trace=12 during insmod or modprobe. If
-   you want to turn the initialization and probing tracing off, set trace=0.
-   The default value for trace is 35 (0x23).
-
-
-
-Example::
-
-     # modprobe pwc size=cif fps=15 power_save=1
-
-The fbufs, mbufs and trace parameters are global and apply to all connected
-cameras. Each camera has its own set of buffers.
-
-size and fps only specify defaults when you open() the device; this is to
-accommodate some tools that don't set the size. You can change these
-settings after open() with the Video4Linux ioctl() calls. The default of
-defaults is QCIF size at 10 fps.
-
-The compression parameter is semiglobal; it sets the initial compression
-preference for all camera's, but this parameter can be set per camera with
-the VIDIOCPWCSCQUAL ioctl() call.
-
-All parameters are optional.
-
diff --git a/Documentation/media/v4l-drivers/pvrusb2.rst b/Documentation/media/v4l-drivers/pvrusb2.rst
deleted file mode 100644
index 83bfaa531ea8..000000000000
--- a/Documentation/media/v4l-drivers/pvrusb2.rst
+++ /dev/null
@@ -1,202 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The pvrusb2 driver
-==================
-
-Author: Mike Isely <isely@pobox.com>
-
-Background
-----------
-
-This driver is intended for the "Hauppauge WinTV PVR USB 2.0", which
-is a USB 2.0 hosted TV Tuner.  This driver is a work in progress.
-Its history started with the reverse-engineering effort by Björn
-Danielsson <pvrusb2@dax.nu> whose web page can be found here:
-http://pvrusb2.dax.nu/
-
-From there Aurelien Alleaume <slts@free.fr> began an effort to
-create a video4linux compatible driver.  I began with Aurelien's
-last known snapshot and evolved the driver to the state it is in
-here.
-
-More information on this driver can be found at:
-http://www.isely.net/pvrusb2.html
-
-
-This driver has a strong separation of layers.  They are very
-roughly:
-
-1. Low level wire-protocol implementation with the device.
-
-2. I2C adaptor implementation and corresponding I2C client drivers
-   implemented elsewhere in V4L.
-
-3. High level hardware driver implementation which coordinates all
-   activities that ensure correct operation of the device.
-
-4. A "context" layer which manages instancing of driver, setup,
-   tear-down, arbitration, and interaction with high level
-   interfaces appropriately as devices are hotplugged in the
-   system.
-
-5. High level interfaces which glue the driver to various published
-   Linux APIs (V4L, sysfs, maybe DVB in the future).
-
-The most important shearing layer is between the top 2 layers.  A
-lot of work went into the driver to ensure that any kind of
-conceivable API can be laid on top of the core driver.  (Yes, the
-driver internally leverages V4L to do its work but that really has
-nothing to do with the API published by the driver to the outside
-world.)  The architecture allows for different APIs to
-simultaneously access the driver.  I have a strong sense of fairness
-about APIs and also feel that it is a good design principle to keep
-implementation and interface isolated from each other.  Thus while
-right now the V4L high level interface is the most complete, the
-sysfs high level interface will work equally well for similar
-functions, and there's no reason I see right now why it shouldn't be
-possible to produce a DVB high level interface that can sit right
-alongside V4L.
-
-Building
---------
-
-To build these modules essentially amounts to just running "Make",
-but you need the kernel source tree nearby and you will likely also
-want to set a few controlling environment variables first in order
-to link things up with that source tree.  Please see the Makefile
-here for comments that explain how to do that.
-
-Source file list / functional overview
---------------------------------------
-
-(Note: The term "module" used below generally refers to loosely
-defined functional units within the pvrusb2 driver and bears no
-relation to the Linux kernel's concept of a loadable module.)
-
-pvrusb2-audio.[ch] - This is glue logic that resides between this
-    driver and the msp3400.ko I2C client driver (which is found
-    elsewhere in V4L).
-
-pvrusb2-context.[ch] - This module implements the context for an
-    instance of the driver.  Everything else eventually ties back to
-    or is otherwise instanced within the data structures implemented
-    here.  Hotplugging is ultimately coordinated here.  All high level
-    interfaces tie into the driver through this module.  This module
-    helps arbitrate each interface's access to the actual driver core,
-    and is designed to allow concurrent access through multiple
-    instances of multiple interfaces (thus you can for example change
-    the tuner's frequency through sysfs while simultaneously streaming
-    video through V4L out to an instance of mplayer).
-
-pvrusb2-debug.h - This header defines a printk() wrapper and a mask
-    of debugging bit definitions for the various kinds of debug
-    messages that can be enabled within the driver.
-
-pvrusb2-debugifc.[ch] - This module implements a crude command line
-    oriented debug interface into the driver.  Aside from being part
-    of the process for implementing manual firmware extraction (see
-    the pvrusb2 web site mentioned earlier), probably I'm the only one
-    who has ever used this.  It is mainly a debugging aid.
-
-pvrusb2-eeprom.[ch] - This is glue logic that resides between this
-    driver the tveeprom.ko module, which is itself implemented
-    elsewhere in V4L.
-
-pvrusb2-encoder.[ch] - This module implements all protocol needed to
-    interact with the Conexant mpeg2 encoder chip within the pvrusb2
-    device.  It is a crude echo of corresponding logic in ivtv,
-    however the design goals (strict isolation) and physical layer
-    (proxy through USB instead of PCI) are enough different that this
-    implementation had to be completely different.
-
-pvrusb2-hdw-internal.h - This header defines the core data structure
-    in the driver used to track ALL internal state related to control
-    of the hardware.  Nobody outside of the core hardware-handling
-    modules should have any business using this header.  All external
-    access to the driver should be through one of the high level
-    interfaces (e.g. V4L, sysfs, etc), and in fact even those high
-    level interfaces are restricted to the API defined in
-    pvrusb2-hdw.h and NOT this header.
-
-pvrusb2-hdw.h - This header defines the full internal API for
-    controlling the hardware.  High level interfaces (e.g. V4L, sysfs)
-    will work through here.
-
-pvrusb2-hdw.c - This module implements all the various bits of logic
-    that handle overall control of a specific pvrusb2 device.
-    (Policy, instantiation, and arbitration of pvrusb2 devices fall
-    within the jurisdiction of pvrusb-context not here).
-
-pvrusb2-i2c-chips-\*.c - These modules implement the glue logic to
-    tie together and configure various I2C modules as they attach to
-    the I2C bus.  There are two versions of this file.  The "v4l2"
-    version is intended to be used in-tree alongside V4L, where we
-    implement just the logic that makes sense for a pure V4L
-    environment.  The "all" version is intended for use outside of
-    V4L, where we might encounter other possibly "challenging" modules
-    from ivtv or older kernel snapshots (or even the support modules
-    in the standalone snapshot).
-
-pvrusb2-i2c-cmd-v4l1.[ch] - This module implements generic V4L1
-    compatible commands to the I2C modules.  It is here where state
-    changes inside the pvrusb2 driver are translated into V4L1
-    commands that are in turn send to the various I2C modules.
-
-pvrusb2-i2c-cmd-v4l2.[ch] - This module implements generic V4L2
-    compatible commands to the I2C modules.  It is here where state
-    changes inside the pvrusb2 driver are translated into V4L2
-    commands that are in turn send to the various I2C modules.
-
-pvrusb2-i2c-core.[ch] - This module provides an implementation of a
-    kernel-friendly I2C adaptor driver, through which other external
-    I2C client drivers (e.g. msp3400, tuner, lirc) may connect and
-    operate corresponding chips within the pvrusb2 device.  It is
-    through here that other V4L modules can reach into this driver to
-    operate specific pieces (and those modules are in turn driven by
-    glue logic which is coordinated by pvrusb2-hdw, doled out by
-    pvrusb2-context, and then ultimately made available to users
-    through one of the high level interfaces).
-
-pvrusb2-io.[ch] - This module implements a very low level ring of
-    transfer buffers, required in order to stream data from the
-    device.  This module is *very* low level.  It only operates the
-    buffers and makes no attempt to define any policy or mechanism for
-    how such buffers might be used.
-
-pvrusb2-ioread.[ch] - This module layers on top of pvrusb2-io.[ch]
-    to provide a streaming API usable by a read() system call style of
-    I/O.  Right now this is the only layer on top of pvrusb2-io.[ch],
-    however the underlying architecture here was intended to allow for
-    other styles of I/O to be implemented with additional modules, like
-    mmap()'ed buffers or something even more exotic.
-
-pvrusb2-main.c - This is the top level of the driver.  Module level
-    and USB core entry points are here.  This is our "main".
-
-pvrusb2-sysfs.[ch] - This is the high level interface which ties the
-    pvrusb2 driver into sysfs.  Through this interface you can do
-    everything with the driver except actually stream data.
-
-pvrusb2-tuner.[ch] - This is glue logic that resides between this
-    driver and the tuner.ko I2C client driver (which is found
-    elsewhere in V4L).
-
-pvrusb2-util.h - This header defines some common macros used
-    throughout the driver.  These macros are not really specific to
-    the driver, but they had to go somewhere.
-
-pvrusb2-v4l2.[ch] - This is the high level interface which ties the
-    pvrusb2 driver into video4linux.  It is through here that V4L
-    applications can open and operate the driver in the usual V4L
-    ways.  Note that **ALL** V4L functionality is published only
-    through here and nowhere else.
-
-pvrusb2-video-\*.[ch] - This is glue logic that resides between this
-    driver and the saa711x.ko I2C client driver (which is found
-    elsewhere in V4L).  Note that saa711x.ko used to be known as
-    saa7115.ko in ivtv.  There are two versions of this; one is
-    selected depending on the particular saa711[5x].ko that is found.
-
-pvrusb2.h - This header contains compile time tunable parameters
-    (and at the moment the driver has very little that needs to be
-    tuned).
diff --git a/Documentation/media/v4l-drivers/pxa_camera.rst b/Documentation/media/v4l-drivers/pxa_camera.rst
deleted file mode 100644
index ee1bd96b66dd..000000000000
--- a/Documentation/media/v4l-drivers/pxa_camera.rst
+++ /dev/null
@@ -1,194 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-PXA-Camera Host Driver
-======================
-
-Author: Robert Jarzmik <robert.jarzmik@free.fr>
-
-Constraints
------------
-
-a) Image size for YUV422P format
-   All YUV422P images are enforced to have width x height % 16 = 0.
-   This is due to DMA constraints, which transfers only planes of 8 byte
-   multiples.
-
-
-Global video workflow
----------------------
-
-a) QCI stopped
-   Initially, the QCI interface is stopped.
-   When a buffer is queued (pxa_videobuf_ops->buf_queue), the QCI starts.
-
-b) QCI started
-   More buffers can be queued while the QCI is started without halting the
-   capture.  The new buffers are "appended" at the tail of the DMA chain, and
-   smoothly captured one frame after the other.
-
-   Once a buffer is filled in the QCI interface, it is marked as "DONE" and
-   removed from the active buffers list. It can be then requeud or dequeued by
-   userland application.
-
-   Once the last buffer is filled in, the QCI interface stops.
-
-c) Capture global finite state machine schema
-
-.. code-block:: none
-
-	+----+                             +---+  +----+
-	| DQ |                             | Q |  | DQ |
-	|    v                             |   v  |    v
-	+-----------+                     +------------------------+
-	|   STOP    |                     | Wait for capture start |
-	+-----------+         Q           +------------------------+
-	+-> | QCI: stop | ------------------> | QCI: run               | <------------+
-	|   | DMA: stop |                     | DMA: stop              |              |
-	|   +-----------+             +-----> +------------------------+              |
-	|                            /                            |                   |
-	|                           /             +---+  +----+   |                   |
-	|capture list empty        /              | Q |  | DQ |   | QCI Irq EOF       |
-	|                         /               |   v  |    v   v                   |
-	|   +--------------------+             +----------------------+               |
-	|   | DMA hotlink missed |             |    Capture running   |               |
-	|   +--------------------+             +----------------------+               |
-	|   | QCI: run           |     +-----> | QCI: run             | <-+           |
-	|   | DMA: stop          |    /        | DMA: run             |   |           |
-	|   +--------------------+   /         +----------------------+   | Other     |
-	|     ^                     /DMA still            |               | channels  |
-	|     | capture list       /  running             | DMA Irq End   | not       |
-	|     | not empty         /                       |               | finished  |
-	|     |                  /                        v               | yet       |
-	|   +----------------------+           +----------------------+   |           |
-	|   |  Videobuf released   |           |  Channel completed   |   |           |
-	|   +----------------------+           +----------------------+   |           |
-	+-- | QCI: run             |           | QCI: run             | --+           |
-	| DMA: run             |           | DMA: run             |               |
-	+----------------------+           +----------------------+               |
-		^                      /           |                           |
-		|          no overrun /            | overrun                   |
-		|                    /             v                           |
-	+--------------------+         /   +----------------------+               |
-	|  Frame completed   |        /    |     Frame overran    |               |
-	+--------------------+ <-----+     +----------------------+ restart frame |
-	| QCI: run           |             | QCI: stop            | --------------+
-	| DMA: run           |             | DMA: stop            |
-	+--------------------+             +----------------------+
-
-	Legend: - each box is a FSM state
-		- each arrow is the condition to transition to another state
-		- an arrow with a comment is a mandatory transition (no condition)
-		- arrow "Q" means : a buffer was enqueued
-		- arrow "DQ" means : a buffer was dequeued
-		- "QCI: stop" means the QCI interface is not enabled
-		- "DMA: stop" means all 3 DMA channels are stopped
-		- "DMA: run" means at least 1 DMA channel is still running
-
-DMA usage
----------
-
-a) DMA flow
-     - first buffer queued for capture
-       Once a first buffer is queued for capture, the QCI is started, but data
-       transfer is not started. On "End Of Frame" interrupt, the irq handler
-       starts the DMA chain.
-     - capture of one videobuffer
-       The DMA chain starts transferring data into videobuffer RAM pages.
-       When all pages are transferred, the DMA irq is raised on "ENDINTR" status
-     - finishing one videobuffer
-       The DMA irq handler marks the videobuffer as "done", and removes it from
-       the active running queue
-       Meanwhile, the next videobuffer (if there is one), is transferred by DMA
-     - finishing the last videobuffer
-       On the DMA irq of the last videobuffer, the QCI is stopped.
-
-b) DMA prepared buffer will have this structure
-
-.. code-block:: none
-
-     +------------+-----+---------------+-----------------+
-     | desc-sg[0] | ... | desc-sg[last] | finisher/linker |
-     +------------+-----+---------------+-----------------+
-
-This structure is pointed by dma->sg_cpu.
-The descriptors are used as follows:
-
-- desc-sg[i]: i-th descriptor, transferring the i-th sg
-  element to the video buffer scatter gather
-- finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
-- linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0
-
-For the next schema, let's assume d0=desc-sg[0] .. dN=desc-sg[N],
-"f" stands for finisher and "l" for linker.
-A typical running chain is :
-
-.. code-block:: none
-
-         Videobuffer 1         Videobuffer 2
-     +---------+----+---+  +----+----+----+---+
-     | d0 | .. | dN | l |  | d0 | .. | dN | f |
-     +---------+----+-|-+  ^----+----+----+---+
-                      |    |
-                      +----+
-
-After the chaining is finished, the chain looks like :
-
-.. code-block:: none
-
-         Videobuffer 1         Videobuffer 2         Videobuffer 3
-     +---------+----+---+  +----+----+----+---+  +----+----+----+---+
-     | d0 | .. | dN | l |  | d0 | .. | dN | l |  | d0 | .. | dN | f |
-     +---------+----+-|-+  ^----+----+----+-|-+  ^----+----+----+---+
-                      |    |                |    |
-                      +----+                +----+
-                                           new_link
-
-c) DMA hot chaining timeslice issue
-
-As DMA chaining is done while DMA _is_ running, the linking may be done
-while the DMA jumps from one Videobuffer to another. On the schema, that
-would be a problem if the following sequence is encountered :
-
-- DMA chain is Videobuffer1 + Videobuffer2
-- pxa_videobuf_queue() is called to queue Videobuffer3
-- DMA controller finishes Videobuffer2, and DMA stops
-
-.. code-block:: none
-
-      =>
-         Videobuffer 1         Videobuffer 2
-     +---------+----+---+  +----+----+----+---+
-     | d0 | .. | dN | l |  | d0 | .. | dN | f |
-     +---------+----+-|-+  ^----+----+----+-^-+
-                      |    |                |
-                      +----+                +-- DMA DDADR loads DDADR_STOP
-
-- pxa_dma_add_tail_buf() is called, the Videobuffer2 "finisher" is
-  replaced by a "linker" to Videobuffer3 (creation of new_link)
-- pxa_videobuf_queue() finishes
-- the DMA irq handler is called, which terminates Videobuffer2
-- Videobuffer3 capture is not scheduled on DMA chain (as it stopped !!!)
-
-.. code-block:: none
-
-         Videobuffer 1         Videobuffer 2         Videobuffer 3
-     +---------+----+---+  +----+----+----+---+  +----+----+----+---+
-     | d0 | .. | dN | l |  | d0 | .. | dN | l |  | d0 | .. | dN | f |
-     +---------+----+-|-+  ^----+----+----+-|-+  ^----+----+----+---+
-                      |    |                |    |
-                      +----+                +----+
-                                           new_link
-                                          DMA DDADR still is DDADR_STOP
-
-- pxa_camera_check_link_miss() is called
-  This checks if the DMA is finished and a buffer is still on the
-  pcdev->capture list. If that's the case, the capture will be restarted,
-  and Videobuffer3 is scheduled on DMA chain.
-- the DMA irq handler finishes
-
-.. note::
-
-     If DMA stops just after pxa_camera_check_link_miss() reads DDADR()
-     value, we have the guarantee that the DMA irq handler will be called back
-     when the DMA will finish the buffer, and pxa_camera_check_link_miss() will
-     be called again, to reschedule Videobuffer3.
diff --git a/Documentation/media/v4l-drivers/qcom_camss.rst b/Documentation/media/v4l-drivers/qcom_camss.rst
deleted file mode 100644
index a72e17d09cb7..000000000000
--- a/Documentation/media/v4l-drivers/qcom_camss.rst
+++ /dev/null
@@ -1,185 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-Qualcomm Camera Subsystem driver
-================================
-
-Introduction
-------------
-
-This file documents the Qualcomm Camera Subsystem driver located under
-drivers/media/platform/qcom/camss.
-
-The current version of the driver supports the Camera Subsystem found on
-Qualcomm MSM8916/APQ8016 and MSM8996/APQ8096 processors.
-
-The driver implements V4L2, Media controller and V4L2 subdev interfaces.
-Camera sensor using V4L2 subdev interface in the kernel is supported.
-
-The driver is implemented using as a reference the Qualcomm Camera Subsystem
-driver for Android as found in Code Aurora [#f1]_ [#f2]_.
-
-
-Qualcomm Camera Subsystem hardware
-----------------------------------
-
-The Camera Subsystem hardware found on 8x16 / 8x96 processors and supported by
-the driver consists of:
-
-- 2 / 3 CSIPHY modules. They handle the Physical layer of the CSI2 receivers.
-  A separate camera sensor can be connected to each of the CSIPHY module;
-- 2 / 4 CSID (CSI Decoder) modules. They handle the Protocol and Application
-  layer of the CSI2 receivers. A CSID can decode data stream from any of the
-  CSIPHY. Each CSID also contains a TG (Test Generator) block which can generate
-  artificial input data for test purposes;
-- ISPIF (ISP Interface) module. Handles the routing of the data streams from
-  the CSIDs to the inputs of the VFE;
-- 1 / 2 VFE (Video Front End) module(s). Contain a pipeline of image processing
-  hardware blocks. The VFE has different input interfaces. The PIX (Pixel) input
-  interface feeds the input data to the image processing pipeline. The image
-  processing pipeline contains also a scale and crop module at the end. Three
-  RDI (Raw Dump Interface) input interfaces bypass the image processing
-  pipeline. The VFE also contains the AXI bus interface which writes the output
-  data to memory.
-
-
-Supported functionality
------------------------
-
-The current version of the driver supports:
-
-- Input from camera sensor via CSIPHY;
-- Generation of test input data by the TG in CSID;
-- RDI interface of VFE
-
-  - Raw dump of the input data to memory.
-
-    Supported formats:
-
-    - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV /
-      V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY);
-    - MIPI RAW8 (8bit Bayer RAW - V4L2_PIX_FMT_SRGGB8 /
-      V4L2_PIX_FMT_SGRBG8 / V4L2_PIX_FMT_SGBRG8 / V4L2_PIX_FMT_SBGGR8);
-    - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P /
-      V4L2_PIX_FMT_SGBRG10P / V4L2_PIX_FMT_SGRBG10P / V4L2_PIX_FMT_SRGGB10P /
-      V4L2_PIX_FMT_Y10P);
-    - MIPI RAW12 (12bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB12P /
-      V4L2_PIX_FMT_SGBRG12P / V4L2_PIX_FMT_SGRBG12P / V4L2_PIX_FMT_SRGGB12P).
-    - (8x96 only) MIPI RAW14 (14bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB14P /
-      V4L2_PIX_FMT_SGBRG14P / V4L2_PIX_FMT_SGRBG14P / V4L2_PIX_FMT_SRGGB14P).
-
-  - (8x96 only) Format conversion of the input data.
-
-    Supported input formats:
-
-    - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P / V4L2_PIX_FMT_Y10P).
-
-    Supported output formats:
-
-    - Plain16 RAW10 (10bit unpacked Bayer RAW - V4L2_PIX_FMT_SBGGR10 / V4L2_PIX_FMT_Y10).
-
-- PIX interface of VFE
-
-  - Format conversion of the input data.
-
-    Supported input formats:
-
-    - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV /
-      V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY).
-
-    Supported output formats:
-
-    - NV12/NV21 (two plane YUV 4:2:0 - V4L2_PIX_FMT_NV12 / V4L2_PIX_FMT_NV21);
-    - NV16/NV61 (two plane YUV 4:2:2 - V4L2_PIX_FMT_NV16 / V4L2_PIX_FMT_NV61).
-    - (8x96 only) YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV /
-      V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY).
-
-  - Scaling support. Configuration of the VFE Encoder Scale module
-    for downscalling with ratio up to 16x.
-
-  - Cropping support. Configuration of the VFE Encoder Crop module.
-
-- Concurrent and independent usage of two (8x96: three) data inputs -
-  could be camera sensors and/or TG.
-
-
-Driver Architecture and Design
-------------------------------
-
-The driver implements the V4L2 subdev interface. With the goal to model the
-hardware links between the modules and to expose a clean, logical and usable
-interface, the driver is split into V4L2 sub-devices as follows (8x16 / 8x96):
-
-- 2 / 3 CSIPHY sub-devices - each CSIPHY is represented by a single sub-device;
-- 2 / 4 CSID sub-devices - each CSID is represented by a single sub-device;
-- 2 / 4 ISPIF sub-devices - ISPIF is represented by a number of sub-devices
-  equal to the number of CSID sub-devices;
-- 4 / 8 VFE sub-devices - VFE is represented by a number of sub-devices equal to
-  the number of the input interfaces (3 RDI and 1 PIX for each VFE).
-
-The considerations to split the driver in this particular way are as follows:
-
-- representing CSIPHY and CSID modules by a separate sub-device for each module
-  allows to model the hardware links between these modules;
-- representing VFE by a separate sub-devices for each input interface allows
-  to use the input interfaces concurrently and independently as this is
-  supported by the hardware;
-- representing ISPIF by a number of sub-devices equal to the number of CSID
-  sub-devices allows to create linear media controller pipelines when using two
-  cameras simultaneously. This avoids branches in the pipelines which otherwise
-  will require a) userspace and b) media framework (e.g. power on/off
-  operations) to  make assumptions about the data flow from a sink pad to a
-  source pad on a single media entity.
-
-Each VFE sub-device is linked to a separate video device node.
-
-The media controller pipeline graph is as follows (with connected two / three
-OV5645 camera sensors):
-
-.. _qcom_camss_graph:
-
-.. kernel-figure:: qcom_camss_graph.dot
-    :alt:   qcom_camss_graph.dot
-    :align: center
-
-    Media pipeline graph 8x16
-
-.. kernel-figure:: qcom_camss_8x96_graph.dot
-    :alt:   qcom_camss_8x96_graph.dot
-    :align: center
-
-    Media pipeline graph 8x96
-
-
-Implementation
---------------
-
-Runtime configuration of the hardware (updating settings while streaming) is
-not required to implement the currently supported functionality. The complete
-configuration on each hardware module is applied on STREAMON ioctl based on
-the current active media links, formats and controls set.
-
-The output size of the scaler module in the VFE is configured with the actual
-compose selection rectangle on the sink pad of the 'msm_vfe0_pix' entity.
-
-The crop output area of the crop module in the VFE is configured with the actual
-crop selection rectangle on the source pad of the 'msm_vfe0_pix' entity.
-
-
-Documentation
--------------
-
-APQ8016 Specification:
-https://developer.qualcomm.com/download/sd410/snapdragon-410-processor-device-specification.pdf
-Referenced 2016-11-24.
-
-APQ8096 Specification:
-https://developer.qualcomm.com/download/sd820e/qualcomm-snapdragon-820e-processor-apq8096sge-device-specification.pdf
-Referenced 2018-06-22.
-
-References
-----------
-
-.. [#f1] https://source.codeaurora.org/quic/la/kernel/msm-3.10/
-.. [#f2] https://source.codeaurora.org/quic/la/kernel/msm-3.18/
diff --git a/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot
deleted file mode 100644
index 7ed243b41b67..000000000000
--- a/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot
+++ /dev/null
@@ -1,106 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-digraph board {
-	rankdir=TB
-	n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000001:port1 -> n0000000a:port0 [style=dashed]
-	n00000001:port1 -> n0000000d:port0 [style=dashed]
-	n00000001:port1 -> n00000010:port0 [style=dashed]
-	n00000001:port1 -> n00000013:port0 [style=dashed]
-	n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000004:port1 -> n0000000a:port0 [style=dashed]
-	n00000004:port1 -> n0000000d:port0 [style=dashed]
-	n00000004:port1 -> n00000010:port0 [style=dashed]
-	n00000004:port1 -> n00000013:port0 [style=dashed]
-	n00000007 [label="{{<port0> 0} | msm_csiphy2\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000007:port1 -> n0000000a:port0 [style=dashed]
-	n00000007:port1 -> n0000000d:port0 [style=dashed]
-	n00000007:port1 -> n00000010:port0 [style=dashed]
-	n00000007:port1 -> n00000013:port0 [style=dashed]
-	n0000000a [label="{{<port0> 0} | msm_csid0\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000000a:port1 -> n00000016:port0 [style=dashed]
-	n0000000a:port1 -> n00000019:port0 [style=dashed]
-	n0000000a:port1 -> n0000001c:port0 [style=dashed]
-	n0000000a:port1 -> n0000001f:port0 [style=dashed]
-	n0000000d [label="{{<port0> 0} | msm_csid1\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000000d:port1 -> n00000016:port0 [style=dashed]
-	n0000000d:port1 -> n00000019:port0 [style=dashed]
-	n0000000d:port1 -> n0000001c:port0 [style=dashed]
-	n0000000d:port1 -> n0000001f:port0 [style=dashed]
-	n00000010 [label="{{<port0> 0} | msm_csid2\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000010:port1 -> n00000016:port0 [style=dashed]
-	n00000010:port1 -> n00000019:port0 [style=dashed]
-	n00000010:port1 -> n0000001c:port0 [style=dashed]
-	n00000010:port1 -> n0000001f:port0 [style=dashed]
-	n00000013 [label="{{<port0> 0} | msm_csid3\n/dev/v4l-subdev6 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000013:port1 -> n00000016:port0 [style=dashed]
-	n00000013:port1 -> n00000019:port0 [style=dashed]
-	n00000013:port1 -> n0000001c:port0 [style=dashed]
-	n00000013:port1 -> n0000001f:port0 [style=dashed]
-	n00000016 [label="{{<port0> 0} | msm_ispif0\n/dev/v4l-subdev7 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000016:port1 -> n00000022:port0 [style=dashed]
-	n00000016:port1 -> n0000002b:port0 [style=dashed]
-	n00000016:port1 -> n00000034:port0 [style=dashed]
-	n00000016:port1 -> n0000003d:port0 [style=dashed]
-	n00000016:port1 -> n00000046:port0 [style=dashed]
-	n00000016:port1 -> n0000004f:port0 [style=dashed]
-	n00000016:port1 -> n00000058:port0 [style=dashed]
-	n00000016:port1 -> n00000061:port0 [style=dashed]
-	n00000019 [label="{{<port0> 0} | msm_ispif1\n/dev/v4l-subdev8 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000019:port1 -> n00000022:port0 [style=dashed]
-	n00000019:port1 -> n0000002b:port0 [style=dashed]
-	n00000019:port1 -> n00000034:port0 [style=dashed]
-	n00000019:port1 -> n0000003d:port0 [style=dashed]
-	n00000019:port1 -> n00000046:port0 [style=dashed]
-	n00000019:port1 -> n0000004f:port0 [style=dashed]
-	n00000019:port1 -> n00000058:port0 [style=dashed]
-	n00000019:port1 -> n00000061:port0 [style=dashed]
-	n0000001c [label="{{<port0> 0} | msm_ispif2\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000001c:port1 -> n00000022:port0 [style=dashed]
-	n0000001c:port1 -> n0000002b:port0 [style=dashed]
-	n0000001c:port1 -> n00000034:port0 [style=dashed]
-	n0000001c:port1 -> n0000003d:port0 [style=dashed]
-	n0000001c:port1 -> n00000046:port0 [style=dashed]
-	n0000001c:port1 -> n0000004f:port0 [style=dashed]
-	n0000001c:port1 -> n00000058:port0 [style=dashed]
-	n0000001c:port1 -> n00000061:port0 [style=dashed]
-	n0000001f [label="{{<port0> 0} | msm_ispif3\n/dev/v4l-subdev10 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000001f:port1 -> n00000022:port0 [style=dashed]
-	n0000001f:port1 -> n0000002b:port0 [style=dashed]
-	n0000001f:port1 -> n00000034:port0 [style=dashed]
-	n0000001f:port1 -> n0000003d:port0 [style=dashed]
-	n0000001f:port1 -> n00000046:port0 [style=dashed]
-	n0000001f:port1 -> n0000004f:port0 [style=dashed]
-	n0000001f:port1 -> n00000058:port0 [style=dashed]
-	n0000001f:port1 -> n00000061:port0 [style=dashed]
-	n00000022 [label="{{<port0> 0} | msm_vfe0_rdi0\n/dev/v4l-subdev11 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000022:port1 -> n00000025 [style=bold]
-	n00000025 [label="msm_vfe0_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
-	n0000002b [label="{{<port0> 0} | msm_vfe0_rdi1\n/dev/v4l-subdev12 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000002b:port1 -> n0000002e [style=bold]
-	n0000002e [label="msm_vfe0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
-	n00000034 [label="{{<port0> 0} | msm_vfe0_rdi2\n/dev/v4l-subdev13 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000034:port1 -> n00000037 [style=bold]
-	n00000037 [label="msm_vfe0_video2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
-	n0000003d [label="{{<port0> 0} | msm_vfe0_pix\n/dev/v4l-subdev14 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000003d:port1 -> n00000040 [style=bold]
-	n00000040 [label="msm_vfe0_video3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
-	n00000046 [label="{{<port0> 0} | msm_vfe1_rdi0\n/dev/v4l-subdev15 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000046:port1 -> n00000049 [style=bold]
-	n00000049 [label="msm_vfe1_video0\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
-	n0000004f [label="{{<port0> 0} | msm_vfe1_rdi1\n/dev/v4l-subdev16 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000004f:port1 -> n00000052 [style=bold]
-	n00000052 [label="msm_vfe1_video1\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
-	n00000058 [label="{{<port0> 0} | msm_vfe1_rdi2\n/dev/v4l-subdev17 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000058:port1 -> n0000005b [style=bold]
-	n0000005b [label="msm_vfe1_video2\n/dev/video6", shape=box, style=filled, fillcolor=yellow]
-	n00000061 [label="{{<port0> 0} | msm_vfe1_pix\n/dev/v4l-subdev18 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000061:port1 -> n00000064 [style=bold]
-	n00000064 [label="msm_vfe1_video3\n/dev/video7", shape=box, style=filled, fillcolor=yellow]
-	n000000e2 [label="{{} | ov5645 3-0039\n/dev/v4l-subdev19 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
-	n000000e2:port0 -> n00000004:port0 [style=bold]
-	n000000e4 [label="{{} | ov5645 3-003a\n/dev/v4l-subdev20 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
-	n000000e4:port0 -> n00000007:port0 [style=bold]
-	n000000e6 [label="{{} | ov5645 3-003b\n/dev/v4l-subdev21 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
-	n000000e6:port0 -> n00000001:port0 [style=bold]
-}
diff --git a/Documentation/media/v4l-drivers/qcom_camss_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_graph.dot
deleted file mode 100644
index ef7dca92fd0b..000000000000
--- a/Documentation/media/v4l-drivers/qcom_camss_graph.dot
+++ /dev/null
@@ -1,43 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-digraph board {
-	rankdir=TB
-	n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000001:port1 -> n00000007:port0 [style=dashed]
-	n00000001:port1 -> n0000000a:port0 [style=dashed]
-	n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000004:port1 -> n00000007:port0 [style=dashed]
-	n00000004:port1 -> n0000000a:port0 [style=dashed]
-	n00000007 [label="{{<port0> 0} | msm_csid0\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000007:port1 -> n0000000d:port0 [style=dashed]
-	n00000007:port1 -> n00000010:port0 [style=dashed]
-	n0000000a [label="{{<port0> 0} | msm_csid1\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000000a:port1 -> n0000000d:port0 [style=dashed]
-	n0000000a:port1 -> n00000010:port0 [style=dashed]
-	n0000000d [label="{{<port0> 0} | msm_ispif0\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000000d:port1 -> n00000013:port0 [style=dashed]
-	n0000000d:port1 -> n0000001c:port0 [style=dashed]
-	n0000000d:port1 -> n00000025:port0 [style=dashed]
-	n0000000d:port1 -> n0000002e:port0 [style=dashed]
-	n00000010 [label="{{<port0> 0} | msm_ispif1\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000010:port1 -> n00000013:port0 [style=dashed]
-	n00000010:port1 -> n0000001c:port0 [style=dashed]
-	n00000010:port1 -> n00000025:port0 [style=dashed]
-	n00000010:port1 -> n0000002e:port0 [style=dashed]
-	n00000013 [label="{{<port0> 0} | msm_vfe0_rdi0\n/dev/v4l-subdev6 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000013:port1 -> n00000016 [style=bold]
-	n00000016 [label="msm_vfe0_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
-	n0000001c [label="{{<port0> 0} | msm_vfe0_rdi1\n/dev/v4l-subdev7 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000001c:port1 -> n0000001f [style=bold]
-	n0000001f [label="msm_vfe0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
-	n00000025 [label="{{<port0> 0} | msm_vfe0_rdi2\n/dev/v4l-subdev8 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000025:port1 -> n00000028 [style=bold]
-	n00000028 [label="msm_vfe0_video2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
-	n0000002e [label="{{<port0> 0} | msm_vfe0_pix\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n0000002e:port1 -> n00000031 [style=bold]
-	n00000031 [label="msm_vfe0_video3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
-	n00000057 [label="{{} | ov5645 1-0076\n/dev/v4l-subdev10 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000057:port0 -> n00000001:port0 [style=bold]
-	n00000059 [label="{{} | ov5645 1-0074\n/dev/v4l-subdev11 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000059:port0 -> n00000004:port0 [style=bold]
-}
diff --git a/Documentation/media/v4l-drivers/radiotrack.rst b/Documentation/media/v4l-drivers/radiotrack.rst
deleted file mode 100644
index a85cb6205db8..000000000000
--- a/Documentation/media/v4l-drivers/radiotrack.rst
+++ /dev/null
@@ -1,168 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The Radiotrack radio driver
-===========================
-
-Author: Stephen M. Benoit <benoits@servicepro.com>
-
-Date:  Dec 14, 1996
-
-ACKNOWLEDGMENTS
-----------------
-
-This document was made based on 'C' code for Linux from Gideon le Grange
-(legrang@active.co.za or legrang@cs.sun.ac.za) in 1994, and elaborations from
-Frans Brinkman (brinkman@esd.nl) in 1996.  The results reported here are from
-experiments that the author performed on his own setup, so your mileage may
-vary... I make no guarantees, claims or warranties to the suitability or
-validity of this information.  No other documentation on the AIMS
-Lab (http://www.aimslab.com/) RadioTrack card was made available to the
-author.  This document is offered in the hopes that it might help users who
-want to use the RadioTrack card in an environment other than MS Windows.
-
-WHY THIS DOCUMENT?
-------------------
-
-I have a RadioTrack card from back when I ran an MS-Windows platform.  After
-converting to Linux, I found Gideon le Grange's command-line software for
-running the card, and found that it was good!  Frans Brinkman made a
-comfortable X-windows interface, and added a scanning feature.  For hack
-value, I wanted to see if the tuner could be tuned beyond the usual FM radio
-broadcast band, so I could pick up the audio carriers from North American
-broadcast TV channels, situated just below and above the 87.0-109.0 MHz range.
-I did not get much success, but I learned about programming ioports under
-Linux and gained some insights about the hardware design used for the card.
-
-So, without further delay, here are the details.
-
-
-PHYSICAL DESCRIPTION
---------------------
-
-The RadioTrack card is an ISA 8-bit FM radio card.  The radio frequency (RF)
-input is simply an antenna lead, and the output is a power audio signal
-available through a miniature phone plug.  Its RF frequencies of operation are
-more or less limited from 87.0 to 109.0 MHz (the commercial FM broadcast
-band).  Although the registers can be programmed to request frequencies beyond
-these limits, experiments did not give promising results.  The variable
-frequency oscillator (VFO) that demodulates the intermediate frequency (IF)
-signal probably has a small range of useful frequencies, and wraps around or
-gets clipped beyond the limits mentioned above.
-
-
-CONTROLLING THE CARD WITH IOPORT
---------------------------------
-
-The RadioTrack (base) ioport is configurable for 0x30c or 0x20c.  Only one
-ioport seems to be involved.  The ioport decoding circuitry must be pretty
-simple, as individual ioport bits are directly matched to specific functions
-(or blocks) of the radio card.  This way, many functions can be changed in
-parallel with one write to the ioport.  The only feedback available through
-the ioports appears to be the "Stereo Detect" bit.
-
-The bits of the ioport are arranged as follows:
-
-.. code-block:: none
-
-	MSb                                                         LSb
-	+------+------+------+--------+--------+-------+---------+--------+
-	| VolA | VolB | ???? | Stereo | Radio  | TuneA | TuneB   | Tune   |
-	|  (+) |  (-) |      | Detect | Audio  | (bit) | (latch) | Update |
-	|      |      |      | Enable | Enable |       |         | Enable |
-	+------+------+------+--------+--------+-------+---------+--------+
-
-
-====  ====  =================================
-VolA  VolB  Description
-====  ====  =================================
-0	 0  audio mute
-0	 1  volume +    (some delay required)
-1	 0  volume -    (some delay required)
-1	 1  stay at present volume
-====  ====  =================================
-
-====================	===========
-Stereo Detect Enable	Description
-====================	===========
-0			No Detect
-1			Detect
-====================	===========
-
-Results available by reading ioport >60 msec after last port write.
-
-  0xff ==> no stereo detected,  0xfd ==> stereo detected.
-
-=============================	=============================
-Radio to Audio (path) Enable	Description
-=============================	=============================
-0				Disable path (silence)
-1				Enable path  (audio produced)
-=============================	=============================
-
-=====  =====  ==================
-TuneA  TuneB  Description
-=====  =====  ==================
-0	0     "zero" bit phase 1
-0	1     "zero" bit phase 2
-1	0     "one" bit phase 1
-1	1     "one" bit phase 2
-=====  =====  ==================
-
-
-24-bit code, where bits = (freq*40) + 10486188.
-The Most Significant 11 bits must be 1010 xxxx 0x0 to be valid.
-The bits are shifted in LSb first.
-
-==================	===========================
-Tune Update Enable	Description
-==================	===========================
-0			Tuner held constant
-1			Tuner updating in progress
-==================	===========================
-
-
-PROGRAMMING EXAMPLES
---------------------
-
-.. code-block:: none
-
-	Default:        BASE <-- 0xc8  (current volume, no stereo detect,
-					radio enable, tuner adjust disable)
-
-	Card Off:	BASE <-- 0x00  (audio mute, no stereo detect,
-					radio disable, tuner adjust disable)
-
-	Card On:	BASE <-- 0x00  (see "Card Off", clears any unfinished business)
-			BASE <-- 0xc8  (see "Default")
-
-	Volume Down:    BASE <-- 0x48  (volume down, no stereo detect,
-					radio enable, tuner adjust disable)
-			wait 10 msec
-			BASE <-- 0xc8  (see "Default")
-
-	Volume Up:      BASE <-- 0x88  (volume up, no stereo detect,
-					radio enable, tuner adjust disable)
-			wait 10 msec
-			BASE <-- 0xc8  (see "Default")
-
-	Check Stereo:   BASE <-- 0xd8  (current volume, stereo detect,
-					radio enable, tuner adjust disable)
-			wait 100 msec
-			x <-- BASE     (read ioport)
-			BASE <-- 0xc8  (see "Default")
-
-			x=0xff ==> "not stereo", x=0xfd ==> "stereo detected"
-
-	Set Frequency:  code = (freq*40) + 10486188
-			foreach of the 24 bits in code,
-			(from Least to Most Significant):
-			to write a "zero" bit,
-			BASE <-- 0x01  (audio mute, no stereo detect, radio
-					disable, "zero" bit phase 1, tuner adjust)
-			BASE <-- 0x03  (audio mute, no stereo detect, radio
-					disable, "zero" bit phase 2, tuner adjust)
-			to write a "one" bit,
-			BASE <-- 0x05  (audio mute, no stereo detect, radio
-					disable, "one" bit phase 1, tuner adjust)
-			BASE <-- 0x07  (audio mute, no stereo detect, radio
-					disable, "one" bit phase 2, tuner adjust)
diff --git a/Documentation/media/v4l-drivers/rcar-fdp1.rst b/Documentation/media/v4l-drivers/rcar-fdp1.rst
deleted file mode 100644
index 88b0edcf9046..000000000000
--- a/Documentation/media/v4l-drivers/rcar-fdp1.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Renesas R-Car Fine Display Processor (FDP1) Driver
-==================================================
-
-The R-Car FDP1 driver implements driver-specific controls as follows.
-
-``V4L2_CID_DEINTERLACING_MODE (menu)``
-    The video deinterlacing mode (such as Bob, Weave, ...). The R-Car FDP1
-    driver implements the following modes.
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-    :widths:       1 4
-
-    * - ``"Progressive" (0)``
-      - The input image video stream is progressive (not interlaced). No
-        deinterlacing is performed. Apart from (optional) format and encoding
-        conversion output frames are identical to the input frames.
-    * - ``"Adaptive 2D/3D" (1)``
-      - Motion adaptive version of 2D and 3D deinterlacing. Use 3D deinterlacing
-        in the presence of fast motion and 2D deinterlacing with diagonal
-        interpolation otherwise.
-    * - ``"Fixed 2D" (2)``
-      - The current field is scaled vertically by averaging adjacent lines to
-        recover missing lines. This method is also known as blending or Line
-        Averaging (LAV).
-    * - ``"Fixed 3D" (3)``
-      - The previous and next fields are averaged to recover lines missing from
-        the current field. This method is also known as Field Averaging (FAV).
-    * - ``"Previous field" (4)``
-      - The current field is weaved with the previous field, i.e. the previous
-        field is used to fill missing lines from the current field. This method
-        is also known as weave deinterlacing.
-    * - ``"Next field" (5)``
-      - The current field is weaved with the next field, i.e. the next field is
-        used to fill missing lines from the current field. This method is also
-        known as weave deinterlacing.
diff --git a/Documentation/media/v4l-drivers/saa7134-cardlist.rst b/Documentation/media/v4l-drivers/saa7134-cardlist.rst
deleted file mode 100644
index afb0e2fb52b0..000000000000
--- a/Documentation/media/v4l-drivers/saa7134-cardlist.rst
+++ /dev/null
@@ -1,803 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-SAA7134 cards list
-==================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - PCI IDs
-
-   * - 0
-     - UNKNOWN/GENERIC
-     -
-
-   * - 1
-     - Proteus Pro [philips reference design]
-     - 1131:2001, 1131:2001
-
-   * - 2
-     - LifeView FlyVIDEO3000
-     - 5168:0138, 4e42:0138
-
-   * - 3
-     - LifeView/Typhoon FlyVIDEO2000
-     - 5168:0138, 4e42:0138
-
-   * - 4
-     - EMPRESS
-     - 1131:6752
-
-   * - 5
-     - SKNet Monster TV
-     - 1131:4e85
-
-   * - 6
-     - Tevion MD 9717
-     -
-
-   * - 7
-     - KNC One TV-Station RDS / Typhoon TV Tuner RDS
-     - 1131:fe01, 1894:fe01
-
-   * - 8
-     - Terratec Cinergy 400 TV
-     - 153b:1142
-
-   * - 9
-     - Medion 5044
-     -
-
-   * - 10
-     - Kworld/KuroutoShikou SAA7130-TVPCI
-     -
-
-   * - 11
-     - Terratec Cinergy 600 TV
-     - 153b:1143
-
-   * - 12
-     - Medion 7134
-     - 16be:0003, 16be:5000
-
-   * - 13
-     - Typhoon TV+Radio 90031
-     -
-
-   * - 14
-     - ELSA EX-VISION 300TV
-     - 1048:226b
-
-   * - 15
-     - ELSA EX-VISION 500TV
-     - 1048:226a
-
-   * - 16
-     - ASUS TV-FM 7134
-     - 1043:4842, 1043:4830, 1043:4840
-
-   * - 17
-     - AOPEN VA1000 POWER
-     - 1131:7133
-
-   * - 18
-     - BMK MPEX No Tuner
-     -
-
-   * - 19
-     - Compro VideoMate TV
-     - 185b:c100
-
-   * - 20
-     - Matrox CronosPlus
-     - 102B:48d0
-
-   * - 21
-     - 10MOONS PCI TV CAPTURE CARD
-     - 1131:2001
-
-   * - 22
-     - AverMedia M156 / Medion 2819
-     - 1461:a70b
-
-   * - 23
-     - BMK MPEX Tuner
-     -
-
-   * - 24
-     - KNC One TV-Station DVR
-     - 1894:a006
-
-   * - 25
-     - ASUS TV-FM 7133
-     - 1043:4843
-
-   * - 26
-     - Pinnacle PCTV Stereo (saa7134)
-     - 11bd:002b
-
-   * - 27
-     - Manli MuchTV M-TV002
-     -
-
-   * - 28
-     - Manli MuchTV M-TV001
-     -
-
-   * - 29
-     - Nagase Sangyo TransGear 3000TV
-     - 1461:050c
-
-   * - 30
-     - Elitegroup ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM)
-     - 1019:4cb4
-
-   * - 31
-     - Elitegroup ECS TVP3XP FM1236 Tuner Card (NTSC,FM)
-     - 1019:4cb5
-
-   * - 32
-     - AVACS SmartTV
-     -
-
-   * - 33
-     - AVerMedia DVD EZMaker
-     - 1461:10ff
-
-   * - 34
-     - Noval Prime TV 7133
-     -
-
-   * - 35
-     - AverMedia AverTV Studio 305
-     - 1461:2115
-
-   * - 36
-     - UPMOST PURPLE TV
-     - 12ab:0800
-
-   * - 37
-     - Items MuchTV Plus / IT-005
-     -
-
-   * - 38
-     - Terratec Cinergy 200 TV
-     - 153b:1152
-
-   * - 39
-     - LifeView FlyTV Platinum Mini
-     - 5168:0212, 4e42:0212, 5169:1502
-
-   * - 40
-     - Compro VideoMate TV PVR/FM
-     - 185b:c100
-
-   * - 41
-     - Compro VideoMate TV Gold+
-     - 185b:c100
-
-   * - 42
-     - Sabrent SBT-TVFM (saa7130)
-     -
-
-   * - 43
-     - :Zolid Xpert TV7134
-     -
-
-   * - 44
-     - Empire PCI TV-Radio LE
-     -
-
-   * - 45
-     - Avermedia AVerTV Studio 307
-     - 1461:9715
-
-   * - 46
-     - AVerMedia Cardbus TV/Radio (E500)
-     - 1461:d6ee
-
-   * - 47
-     - Terratec Cinergy 400 mobile
-     - 153b:1162
-
-   * - 48
-     - Terratec Cinergy 600 TV MK3
-     - 153b:1158
-
-   * - 49
-     - Compro VideoMate Gold+ Pal
-     - 185b:c200
-
-   * - 50
-     - Pinnacle PCTV 300i DVB-T + PAL
-     - 11bd:002d
-
-   * - 51
-     - ProVideo PV952
-     - 1540:9524
-
-   * - 52
-     - AverMedia AverTV/305
-     - 1461:2108
-
-   * - 53
-     - ASUS TV-FM 7135
-     - 1043:4845
-
-   * - 54
-     - LifeView FlyTV Platinum FM / Gold
-     - 5168:0214, 5168:5214, 1489:0214, 5168:0304
-
-   * - 55
-     - LifeView FlyDVB-T DUO / MSI TV@nywhere Duo
-     - 5168:0306, 4E42:0306
-
-   * - 56
-     - Avermedia AVerTV 307
-     - 1461:a70a
-
-   * - 57
-     - Avermedia AVerTV GO 007 FM
-     - 1461:f31f
-
-   * - 58
-     - ADS Tech Instant TV (saa7135)
-     - 1421:0350, 1421:0351, 1421:0370, 1421:1370
-
-   * - 59
-     - Kworld/Tevion V-Stream Xpert TV PVR7134
-     -
-
-   * - 60
-     - LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus
-     - 5168:0502, 4e42:0502, 1489:0502
-
-   * - 61
-     - Philips TOUGH DVB-T reference design
-     - 1131:2004
-
-   * - 62
-     - Compro VideoMate TV Gold+II
-     -
-
-   * - 63
-     - Kworld Xpert TV PVR7134
-     -
-
-   * - 64
-     - FlyTV mini Asus Digimatrix
-     - 1043:0210
-
-   * - 65
-     - V-Stream Studio TV Terminator
-     -
-
-   * - 66
-     - Yuan TUN-900 (saa7135)
-     -
-
-   * - 67
-     - Beholder BeholdTV 409 FM
-     - 0000:4091
-
-   * - 68
-     - GoTView 7135 PCI
-     - 5456:7135
-
-   * - 69
-     - Philips EUROPA V3 reference design
-     - 1131:2004
-
-   * - 70
-     - Compro Videomate DVB-T300
-     - 185b:c900
-
-   * - 71
-     - Compro Videomate DVB-T200
-     - 185b:c901
-
-   * - 72
-     - RTD Embedded Technologies VFG7350
-     - 1435:7350
-
-   * - 73
-     - RTD Embedded Technologies VFG7330
-     - 1435:7330
-
-   * - 74
-     - LifeView FlyTV Platinum Mini2
-     - 14c0:1212
-
-   * - 75
-     - AVerMedia AVerTVHD MCE A180
-     - 1461:1044
-
-   * - 76
-     - SKNet MonsterTV Mobile
-     - 1131:4ee9
-
-   * - 77
-     - Pinnacle PCTV 40i/50i/110i (saa7133)
-     - 11bd:002e
-
-   * - 78
-     - ASUSTeK P7131 Dual
-     - 1043:4862
-
-   * - 79
-     - Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
-     -
-
-   * - 80
-     - ASUS Digimatrix TV
-     - 1043:0210
-
-   * - 81
-     - Philips Tiger reference design
-     - 1131:2018
-
-   * - 82
-     - MSI TV@Anywhere plus
-     - 1462:6231, 1462:8624
-
-   * - 83
-     - Terratec Cinergy 250 PCI TV
-     - 153b:1160
-
-   * - 84
-     - LifeView FlyDVB Trio
-     - 5168:0319
-
-   * - 85
-     - AverTV DVB-T 777
-     - 1461:2c05, 1461:2c05
-
-   * - 86
-     - LifeView FlyDVB-T / Genius VideoWonder DVB-T
-     - 5168:0301, 1489:0301
-
-   * - 87
-     - ADS Instant TV Duo Cardbus PTV331
-     - 0331:1421
-
-   * - 88
-     - Tevion/KWorld DVB-T 220RF
-     - 17de:7201
-
-   * - 89
-     - ELSA EX-VISION 700TV
-     - 1048:226c
-
-   * - 90
-     - Kworld ATSC110/115
-     - 17de:7350, 17de:7352
-
-   * - 91
-     - AVerMedia A169 B
-     - 1461:7360
-
-   * - 92
-     - AVerMedia A169 B1
-     - 1461:6360
-
-   * - 93
-     - Medion 7134 Bridge #2
-     - 16be:0005
-
-   * - 94
-     - LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB
-     - 5168:3306, 5168:3502, 5168:3307, 4e42:3502
-
-   * - 95
-     - LifeView FlyVIDEO3000 (NTSC)
-     - 5169:0138
-
-   * - 96
-     - Medion Md8800 Quadro
-     - 16be:0007, 16be:0008, 16be:000d
-
-   * - 97
-     - LifeView FlyDVB-S /Acorp TV134DS
-     - 5168:0300, 4e42:0300
-
-   * - 98
-     - Proteus Pro 2309
-     - 0919:2003
-
-   * - 99
-     - AVerMedia TV Hybrid A16AR
-     - 1461:2c00
-
-   * - 100
-     - Asus Europa2 OEM
-     - 1043:4860
-
-   * - 101
-     - Pinnacle PCTV 310i
-     - 11bd:002f
-
-   * - 102
-     - Avermedia AVerTV Studio 507
-     - 1461:9715
-
-   * - 103
-     - Compro Videomate DVB-T200A
-     -
-
-   * - 104
-     - Hauppauge WinTV-HVR1110 DVB-T/Hybrid
-     - 0070:6700, 0070:6701, 0070:6702, 0070:6703, 0070:6704, 0070:6705
-
-   * - 105
-     - Terratec Cinergy HT PCMCIA
-     - 153b:1172
-
-   * - 106
-     - Encore ENLTV
-     - 1131:2342, 1131:2341, 3016:2344
-
-   * - 107
-     - Encore ENLTV-FM
-     - 1131:230f
-
-   * - 108
-     - Terratec Cinergy HT PCI
-     - 153b:1175
-
-   * - 109
-     - Philips Tiger - S Reference design
-     -
-
-   * - 110
-     - Avermedia M102
-     - 1461:f31e
-
-   * - 111
-     - ASUS P7131 4871
-     - 1043:4871
-
-   * - 112
-     - ASUSTeK P7131 Hybrid
-     - 1043:4876
-
-   * - 113
-     - Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM)
-     - 1019:4cb6
-
-   * - 114
-     - KWorld DVB-T 210
-     - 17de:7250
-
-   * - 115
-     - Sabrent PCMCIA TV-PCB05
-     - 0919:2003
-
-   * - 116
-     - 10MOONS TM300 TV Card
-     - 1131:2304
-
-   * - 117
-     - Avermedia Super 007
-     - 1461:f01d
-
-   * - 118
-     - Beholder BeholdTV 401
-     - 0000:4016
-
-   * - 119
-     - Beholder BeholdTV 403
-     - 0000:4036
-
-   * - 120
-     - Beholder BeholdTV 403 FM
-     - 0000:4037
-
-   * - 121
-     - Beholder BeholdTV 405
-     - 0000:4050
-
-   * - 122
-     - Beholder BeholdTV 405 FM
-     - 0000:4051
-
-   * - 123
-     - Beholder BeholdTV 407
-     - 0000:4070
-
-   * - 124
-     - Beholder BeholdTV 407 FM
-     - 0000:4071
-
-   * - 125
-     - Beholder BeholdTV 409
-     - 0000:4090
-
-   * - 126
-     - Beholder BeholdTV 505 FM
-     - 5ace:5050
-
-   * - 127
-     - Beholder BeholdTV 507 FM / BeholdTV 509 FM
-     - 5ace:5070, 5ace:5090
-
-   * - 128
-     - Beholder BeholdTV Columbus TV/FM
-     - 0000:5201
-
-   * - 129
-     - Beholder BeholdTV 607 FM
-     - 5ace:6070
-
-   * - 130
-     - Beholder BeholdTV M6
-     - 5ace:6190
-
-   * - 131
-     - Twinhan Hybrid DTV-DVB 3056 PCI
-     - 1822:0022
-
-   * - 132
-     - Genius TVGO AM11MCE
-     -
-
-   * - 133
-     - NXP Snake DVB-S reference design
-     -
-
-   * - 134
-     - Medion/Creatix CTX953 Hybrid
-     - 16be:0010
-
-   * - 135
-     - MSI TV@nywhere A/D v1.1
-     - 1462:8625
-
-   * - 136
-     - AVerMedia Cardbus TV/Radio (E506R)
-     - 1461:f436
-
-   * - 137
-     - AVerMedia Hybrid TV/Radio (A16D)
-     - 1461:f936
-
-   * - 138
-     - Avermedia M115
-     - 1461:a836
-
-   * - 139
-     - Compro VideoMate T750
-     - 185b:c900
-
-   * - 140
-     - Avermedia DVB-S Pro A700
-     - 1461:a7a1
-
-   * - 141
-     - Avermedia DVB-S Hybrid+FM A700
-     - 1461:a7a2
-
-   * - 142
-     - Beholder BeholdTV H6
-     - 5ace:6290
-
-   * - 143
-     - Beholder BeholdTV M63
-     - 5ace:6191
-
-   * - 144
-     - Beholder BeholdTV M6 Extra
-     - 5ace:6193
-
-   * - 145
-     - AVerMedia MiniPCI DVB-T Hybrid M103
-     - 1461:f636, 1461:f736
-
-   * - 146
-     - ASUSTeK P7131 Analog
-     -
-
-   * - 147
-     - Asus Tiger 3in1
-     - 1043:4878
-
-   * - 148
-     - Encore ENLTV-FM v5.3
-     - 1a7f:2008
-
-   * - 149
-     - Avermedia PCI pure analog (M135A)
-     - 1461:f11d
-
-   * - 150
-     - Zogis Real Angel 220
-     -
-
-   * - 151
-     - ADS Tech Instant HDTV
-     - 1421:0380
-
-   * - 152
-     - Asus Tiger Rev:1.00
-     - 1043:4857
-
-   * - 153
-     - Kworld Plus TV Analog Lite PCI
-     - 17de:7128
-
-   * - 154
-     - Avermedia AVerTV GO 007 FM Plus
-     - 1461:f31d
-
-   * - 155
-     - Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid
-     - 0070:6706, 0070:6708
-
-   * - 156
-     - Hauppauge WinTV-HVR1120 DVB-T/Hybrid
-     - 0070:6707, 0070:6709, 0070:670a
-
-   * - 157
-     - Avermedia AVerTV Studio 507UA
-     - 1461:a11b
-
-   * - 158
-     - AVerMedia Cardbus TV/Radio (E501R)
-     - 1461:b7e9
-
-   * - 159
-     - Beholder BeholdTV 505 RDS
-     - 0000:505B
-
-   * - 160
-     - Beholder BeholdTV 507 RDS
-     - 0000:5071
-
-   * - 161
-     - Beholder BeholdTV 507 RDS
-     - 0000:507B
-
-   * - 162
-     - Beholder BeholdTV 607 FM
-     - 5ace:6071
-
-   * - 163
-     - Beholder BeholdTV 609 FM
-     - 5ace:6090
-
-   * - 164
-     - Beholder BeholdTV 609 FM
-     - 5ace:6091
-
-   * - 165
-     - Beholder BeholdTV 607 RDS
-     - 5ace:6072
-
-   * - 166
-     - Beholder BeholdTV 607 RDS
-     - 5ace:6073
-
-   * - 167
-     - Beholder BeholdTV 609 RDS
-     - 5ace:6092
-
-   * - 168
-     - Beholder BeholdTV 609 RDS
-     - 5ace:6093
-
-   * - 169
-     - Compro VideoMate S350/S300
-     - 185b:c900
-
-   * - 170
-     - AverMedia AverTV Studio 505
-     - 1461:a115
-
-   * - 171
-     - Beholder BeholdTV X7
-     - 5ace:7595
-
-   * - 172
-     - RoverMedia TV Link Pro FM
-     - 19d1:0138
-
-   * - 173
-     - Zolid Hybrid TV Tuner PCI
-     - 1131:2004
-
-   * - 174
-     - Asus Europa Hybrid OEM
-     - 1043:4847
-
-   * - 175
-     - Leadtek Winfast DTV1000S
-     - 107d:6655
-
-   * - 176
-     - Beholder BeholdTV 505 RDS
-     - 0000:5051
-
-   * - 177
-     - Hawell HW-404M7
-     -
-
-   * - 178
-     - Beholder BeholdTV H7
-     - 5ace:7190
-
-   * - 179
-     - Beholder BeholdTV A7
-     - 5ace:7090
-
-   * - 180
-     - Avermedia PCI M733A
-     - 1461:4155, 1461:4255
-
-   * - 181
-     - TechoTrend TT-budget T-3000
-     - 13c2:2804
-
-   * - 182
-     - Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid
-     - 17de:b136
-
-   * - 183
-     - Compro VideoMate Vista M1F
-     - 185b:c900
-
-   * - 184
-     - Encore ENLTV-FM 3
-     - 1a7f:2108
-
-   * - 185
-     - MagicPro ProHDTV Pro2 DMB-TH/Hybrid
-     - 17de:d136
-
-   * - 186
-     - Beholder BeholdTV 501
-     - 5ace:5010
-
-   * - 187
-     - Beholder BeholdTV 503 FM
-     - 5ace:5030
-
-   * - 188
-     - Sensoray 811/911
-     - 6000:0811, 6000:0911
-
-   * - 189
-     - Kworld PC150-U
-     - 17de:a134
-
-   * - 190
-     - Asus My Cinema PS3-100
-     - 1043:48cd
-
-   * - 191
-     - Hawell HW-9004V1
-     -
-
-   * - 192
-     - AverMedia AverTV Satellite Hybrid+FM A706
-     - 1461:2055
-
-   * - 193
-     - WIS Voyager or compatible
-     - 1905:7007
-
-   * - 194
-     - AverMedia AverTV/505
-     - 1461:a10a
-
-   * - 195
-     - Leadtek Winfast TV2100 FM
-     - 107d:6f3a
-
-   * - 196
-     - SnaZio* TVPVR PRO
-     - 1779:13cf
diff --git a/Documentation/media/v4l-drivers/saa7134.rst b/Documentation/media/v4l-drivers/saa7134.rst
deleted file mode 100644
index 15d06facdbc1..000000000000
--- a/Documentation/media/v4l-drivers/saa7134.rst
+++ /dev/null
@@ -1,115 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The saa7134 driver
-==================
-
-Author Gerd Hoffmann
-
-
-This is a v4l2/oss device driver for saa7130/33/34/35 based capture / TV
-boards.  See http://www.semiconductors.philips.com/pip/saa7134hl for a
-description.
-
-
-Status
-------
-
-Almost everything is working.  video, sound, tuner, radio, mpeg ts, ...
-
-As with bttv, card-specific tweaks are needed.  Check CARDLIST for a
-list of known TV cards and saa7134-cards.c for the drivers card
-configuration info.
-
-
-Build
------
-
-Pick up videodev + v4l2 patches from http://bytesex.org/patches/.
-Configure, build, install + boot the new kernel.  You'll need at least
-these config options:
-
-.. code-block:: none
-
-	CONFIG_I2C=m
-	CONFIG_VIDEO_DEV=m
-
-Type "make" to build the driver now.  "make install" installs the
-driver.  "modprobe saa7134" should load it.  Depending on the card you
-might have to pass card=<nr> as insmod option, check CARDLIST for
-valid choices.
-
-
-Changes / Fixes
----------------
-
-Please mail me unified diffs ("diff -u") with your changes, and don't
-forget to tell me what it changes / which problem it fixes / whatever
-it is good for ...
-
-
-Known Problems
---------------
-
-* The tuner for the flyvideos isn't detected automatically and the
-  default might not work for you depending on which version you have.
-  There is a tuner= insmod option to override the driver's default.
-
-Card Variations:
-----------------
-
-Cards can use either of these two crystals (xtal):
-
-- 32.11 MHz -> .audio_clock=0x187de7
-- 24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600)
-
-Some details about 30/34/35:
-
-- saa7130 - low-price chip, doesn't have mute, that is why all those
-  cards should have .mute field defined in their tuner structure.
-
-- saa7134 - usual chip
-
-- saa7133/35 - saa7135 is probably a marketing decision, since all those
-  chips identifies itself as 33 on pci.
-
-LifeView GPIOs
---------------
-
-This section was authored by: Peter Missel <peter.missel@onlinehome.de>
-
-- LifeView FlyTV Platinum FM (LR214WF)
-
-    - GP27    MDT2005 PB4 pin 10
-    - GP26    MDT2005 PB3 pin 9
-    - GP25    MDT2005 PB2 pin 8
-    - GP23    MDT2005 PB1 pin 7
-    - GP22    MDT2005 PB0 pin 6
-    - GP21    MDT2005 PB5 pin 11
-    - GP20    MDT2005 PB6 pin 12
-    - GP19    MDT2005 PB7 pin 13
-    - nc      MDT2005 PA3 pin 2
-    - Remote  MDT2005 PA2 pin 1
-    - GP18    MDT2005 PA1 pin 18
-    - nc      MDT2005 PA0 pin 17 strap low
-    - GP17    Strap "GP7"=High
-    - GP16    Strap "GP6"=High
-
-	- 0=Radio 1=TV
-	- Drives SA630D ENCH1 and HEF4052 A1 pinsto do FM radio through
-	  SIF input
-
-    - GP15    nc
-    - GP14    nc
-    - GP13    nc
-    - GP12    Strap "GP5" = High
-    - GP11    Strap "GP4" = High
-    - GP10    Strap "GP3" = High
-    - GP09    Strap "GP2" = Low
-    - GP08    Strap "GP1" = Low
-    - GP07.00 nc
-
-Credits
--------
-
-andrew.stevens@philips.com + werner.leeb@philips.com for providing
-saa7134 hardware specs and sample board.
diff --git a/Documentation/media/v4l-drivers/saa7164-cardlist.rst b/Documentation/media/v4l-drivers/saa7164-cardlist.rst
deleted file mode 100644
index e8f36e084537..000000000000
--- a/Documentation/media/v4l-drivers/saa7164-cardlist.rst
+++ /dev/null
@@ -1,71 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-SAA7164 cards list
-==================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - PCI IDs
-
-   * - 0
-     - Unknown
-     -
-
-   * - 1
-     - Generic Rev2
-     -
-
-   * - 2
-     - Generic Rev3
-     -
-
-   * - 3
-     - Hauppauge WinTV-HVR2250
-     - 0070:8880, 0070:8810
-
-   * - 4
-     - Hauppauge WinTV-HVR2200
-     - 0070:8980
-
-   * - 5
-     - Hauppauge WinTV-HVR2200
-     - 0070:8900
-
-   * - 6
-     - Hauppauge WinTV-HVR2200
-     - 0070:8901
-
-   * - 7
-     - Hauppauge WinTV-HVR2250
-     - 0070:8891, 0070:8851
-
-   * - 8
-     - Hauppauge WinTV-HVR2250
-     - 0070:88A1
-
-   * - 9
-     - Hauppauge WinTV-HVR2200
-     - 0070:8940
-
-   * - 10
-     - Hauppauge WinTV-HVR2200
-     - 0070:8953
-
-   * - 11
-     - Hauppauge WinTV-HVR2255(proto)
-     - 0070:f111
-
-   * - 12
-     - Hauppauge WinTV-HVR2255
-     - 0070:f111
-
-   * - 13
-     - Hauppauge WinTV-HVR2205
-     - 0070:f123, 0070:f120
diff --git a/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst b/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst
deleted file mode 100644
index 822fcb8368ae..000000000000
--- a/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst
+++ /dev/null
@@ -1,142 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver
-=======================================================================
-
-Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-
-Terminology
------------
-
-sensor scales: horizontal and vertical scales, configured by the sensor driver
-host scales: -"- host driver
-combined scales: sensor_scale * host_scale
-
-
-Generic scaling / cropping scheme
----------------------------------
-
-.. code-block:: none
-
-	-1--
-	|
-	-2-- -\
-	|      --\
-	|         --\
-	+-5-- .      -- -3-- -\
-	|      `...            -\
-	|          `... -4-- .   - -7..
-	|                     `.
-	|                       `. .6--
-	|
-	|                        . .6'-
-	|                      .´
-	|           ... -4'- .´
-	|       ...´             - -7'.
-	+-5'- .´               -/
-	|            -- -3'- -/
-	|         --/
-	|      --/
-	-2'- -/
-	|
-	|
-	-1'-
-
-In the above chart minuses and slashes represent "real" data amounts, points and
-accents represent "useful" data, basically, CEU scaled and cropped output,
-mapped back onto the client's source plane.
-
-Such a configuration can be produced by user requests:
-
-S_CROP(left / top = (5) - (1), width / height = (5') - (5))
-S_FMT(width / height = (6') - (6))
-
-Here:
-
-(1) to (1') - whole max width or height
-(1) to (2)  - sensor cropped left or top
-(2) to (2') - sensor cropped width or height
-(3) to (3') - sensor scale
-(3) to (4)  - CEU cropped left or top
-(4) to (4') - CEU cropped width or height
-(5) to (5') - reverse sensor scale applied to CEU cropped width or height
-(2) to (5)  - reverse sensor scale applied to CEU cropped left or top
-(6) to (6') - CEU scale - user window
-
-
-S_FMT
------
-
-Do not touch input rectangle - it is already optimal.
-
-1. Calculate current sensor scales:
-
-	scale_s = ((2') - (2)) / ((3') - (3))
-
-2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
-current sensor scales onto input window - this is user S_CROP:
-
-	width_u = (5') - (5) = ((4') - (4)) * scale_s
-
-3. Calculate new combined scales from "effective" input window to requested user
-window:
-
-	scale_comb = width_u / ((6') - (6))
-
-4. Calculate sensor output window by applying combined scales to real input
-window:
-
-	width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb
-
-5. Apply iterative sensor S_FMT for sensor output window.
-
-	subdev->video_ops->s_fmt(.width = width_s_out)
-
-6. Retrieve sensor output window (g_fmt)
-
-7. Calculate new sensor scales:
-
-	scale_s_new = ((3')_new - (3)_new) / ((2') - (2))
-
-8. Calculate new CEU crop - apply sensor scales to previously calculated
-"effective" crop:
-
-	width_ceu = (4')_new - (4)_new = width_u / scale_s_new
-	left_ceu = (4)_new - (3)_new = ((5) - (2)) / scale_s_new
-
-9. Use CEU cropping to crop to the new window:
-
-	ceu_crop(.width = width_ceu, .left = left_ceu)
-
-10. Use CEU scaling to scale to the requested user window:
-
-	scale_ceu = width_ceu / width
-
-
-S_CROP
-------
-
-The :ref:`V4L2 crop API <crop-scale>` says:
-
-"...specification does not define an origin or units. However by convention
-drivers should horizontally count unscaled samples relative to 0H."
-
-We choose to follow the advise and interpret cropping units as client input
-pixels.
-
-Cropping is performed in the following 6 steps:
-
-1. Request exactly user rectangle from the sensor.
-
-2. If smaller - iterate until a larger one is obtained. Result: sensor cropped
-   to 2 : 2', target crop 5 : 5', current output format 6' - 6.
-
-3. In the previous step the sensor has tried to preserve its output frame as
-   good as possible, but it could have changed. Retrieve it again.
-
-4. Sensor scaled to 3 : 3'. Sensor's scale is (2' - 2) / (3' - 3). Calculate
-   intermediate window: 4' - 4 = (5' - 5) * (3' - 3) / (2' - 2)
-
-5. Calculate and apply host scale = (6' - 6) / (4' - 4)
-
-6. Calculate and apply host crop: 6 - 7 = (5 - 2) * (6' - 6) / (5' - 5)
diff --git a/Documentation/media/v4l-drivers/si470x.rst b/Documentation/media/v4l-drivers/si470x.rst
deleted file mode 100644
index d53bf5f95200..000000000000
--- a/Documentation/media/v4l-drivers/si470x.rst
+++ /dev/null
@@ -1,167 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-The Silicon Labs Si470x FM Radio Receivers driver
-=================================================
-
-Copyright |copy| 2009 Tobias Lorenz <tobias.lorenz@gmx.net>
-
-
-Information from Silicon Labs
------------------------------
-
-Silicon Laboratories is the manufacturer of the radio ICs, that nowadays are the
-most often used radio receivers in cell phones. Usually they are connected with
-I2C. But SiLabs also provides a reference design, which integrates this IC,
-together with a small microcontroller C8051F321, to form a USB radio.
-Part of this reference design is also a radio application in binary and source
-code. The software also contains an automatic firmware upgrade to the most
-current version. Information on these can be downloaded here:
-http://www.silabs.com/usbradio
-
-
-Supported ICs
--------------
-
-The following ICs have a very similar register set, so that they are or will be
-supported somewhen by the driver:
-
-- Si4700: FM radio receiver
-- Si4701: FM radio receiver, RDS Support
-- Si4702: FM radio receiver
-- Si4703: FM radio receiver, RDS Support
-- Si4704: FM radio receiver, no external antenna required
-- Si4705: FM radio receiver, no external antenna required, RDS support, Dig I/O
-- Si4706: Enhanced FM RDS/TMC radio receiver, no external antenna required, RDS
-	  Support
-- Si4707: Dedicated weather band radio receiver with SAME decoder, RDS Support
-- Si4708: Smallest FM receivers
-- Si4709: Smallest FM receivers, RDS Support
-
-More information on these can be downloaded here:
-http://www.silabs.com/products/mcu/Pages/USBFMRadioRD.aspx
-
-
-Supported USB devices
----------------------
-
-Currently the following USB radios (vendor:product) with the Silicon Labs si470x
-chips are known to work:
-
-- 10c4:818a: Silicon Labs USB FM Radio Reference Design
-- 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF)
-- 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
-- 10c5:819a: Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear)
-
-
-Software
---------
-
-Testing is usually done with most application under Debian/testing:
-
-- fmtools - Utility for managing FM tuner cards
-- gnomeradio - FM-radio tuner for the GNOME desktop
-- gradio - GTK FM radio tuner
-- kradio - Comfortable Radio Application for KDE
-- radio - ncurses-based radio application
-- mplayer - The Ultimate Movie Player For Linux
-- v4l2-ctl - Collection of command line video4linux utilities
-
-For example, you can use:
-
-.. code-block:: none
-
-	v4l2-ctl -d /dev/radio0 --set-ctrl=volume=10,mute=0 --set-freq=95.21 --all
-
-There is also a library libv4l, which can be used. It's going to have a function
-for frequency seeking, either by using hardware functionality as in radio-si470x
-or by implementing a function as we currently have in every of the mentioned
-programs. Somewhen the radio programs should make use of libv4l.
-
-For processing RDS information, there is a project ongoing at:
-http://rdsd.berlios.de/
-
-There is currently no project for making TMC sentences human readable.
-
-
-Audio Listing
--------------
-
-USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to
-also select SND_USB_AUDIO, as this is required to get sound from the radio. For
-listing you have to redirect the sound, for example using one of the following
-commands. Please adjust the audio devices to your needs (/dev/dsp* and hw:x,x).
-
-If you just want to test audio (very poor quality):
-
-.. code-block:: none
-
-	cat /dev/dsp1 > /dev/dsp
-
-If you use sox + OSS try:
-
-.. code-block:: none
-
-	sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp
-
-or using sox + alsa:
-
-.. code-block:: none
-
-	sox --endian little -c 2 -S -r 96000 -t alsa hw:1 -t alsa -r 96000 hw:0
-
-If you use arts try:
-
-.. code-block:: none
-
-	arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B -
-
-If you use mplayer try:
-
-.. code-block:: none
-
-	mplayer -radio adevice=hw=1.0:arate=96000 \
-		-rawaudio rate=96000 \
-		radio://<frequency>/capture
-
-Module Parameters
------------------
-
-After loading the module, you still have access to some of them in the sysfs
-mount under /sys/module/radio_si470x/parameters. The contents of read-only files
-(0444) are not updated, even if space, band and de are changed using private
-video controls. The others are runtime changeable.
-
-
-Errors
-------
-
-Increase tune_timeout, if you often get -EIO errors.
-
-When timed out or band limit is reached, hw_freq_seek returns -EAGAIN.
-
-If you get any errors from snd_usb_audio, please report them to the ALSA people.
-
-
-Open Issues
------------
-
-V4L minor device allocation and parameter setting is not perfect. A solution is
-currently under discussion.
-
-There is an USB interface for downloading/uploading new firmware images. Support
-for it can be implemented using the request_firmware interface.
-
-There is a RDS interrupt mode. The driver is already using the same interface
-for polling RDS information, but is currently not using the interrupt mode.
-
-There is a LED interface, which can be used to override the LED control
-programmed in the firmware. This can be made available using the LED support
-functions in the kernel.
-
-
-Other useful information and links
-----------------------------------
-
-http://www.silabs.com/usbradio
diff --git a/Documentation/media/v4l-drivers/si4713.rst b/Documentation/media/v4l-drivers/si4713.rst
deleted file mode 100644
index be8e6b49b7b4..000000000000
--- a/Documentation/media/v4l-drivers/si4713.rst
+++ /dev/null
@@ -1,192 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-The Silicon Labs Si4713 FM Radio Transmitter Driver
-===================================================
-
-Copyright |copy| 2009 Nokia Corporation
-
-Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
-
-
-Information about the Device
-----------------------------
-
-This chip is a Silicon Labs product. It is a I2C device, currently on 0x63 address.
-Basically, it has transmission and signal noise level measurement features.
-
-The Si4713 integrates transmit functions for FM broadcast stereo transmission.
-The chip also allows integrated receive power scanning to identify low signal
-power FM channels.
-
-The chip is programmed using commands and responses. There are also several
-properties which can change the behavior of this chip.
-
-Users must comply with local regulations on radio frequency (RF) transmission.
-
-Device driver description
--------------------------
-
-There are two modules to handle this device. One is a I2C device driver
-and the other is a platform driver.
-
-The I2C device driver exports a v4l2-subdev interface to the kernel.
-All properties can also be accessed by v4l2 extended controls interface, by
-using the v4l2-subdev calls (g_ext_ctrls, s_ext_ctrls).
-
-The platform device driver exports a v4l2 radio device interface to user land.
-So, it uses the I2C device driver as a sub device in order to send the user
-commands to the actual device. Basically it is a wrapper to the I2C device driver.
-
-Applications can use v4l2 radio API to specify frequency of operation, mute state,
-etc. But mostly of its properties will be present in the extended controls.
-
-When the v4l2 mute property is set to 1 (true), the driver will turn the chip off.
-
-Properties description
-----------------------
-
-The properties can be accessed using v4l2 extended controls.
-Here is an output from v4l2-ctl util:
-
-.. code-block:: none
-
-	/ # v4l2-ctl -d /dev/radio0 --all -L
-	Driver Info:
-		Driver name   : radio-si4713
-		Card type     : Silicon Labs Si4713 Modulator
-		Bus info      :
-		Driver version: 0
-		Capabilities  : 0x00080800
-			RDS Output
-			Modulator
-	Audio output: 0 (FM Modulator Audio Out)
-	Frequency: 1408000 (88.000000 MHz)
-	Video Standard = 0x00000000
-	Modulator:
-		Name                 : FM Modulator
-		Capabilities         : 62.5 Hz stereo rds
-		Frequency range      : 76.0 MHz - 108.0 MHz
-		Subchannel modulation: stereo+rds
-
-	User Controls
-
-				mute (bool) : default=1 value=0
-
-	FM Radio Modulator Controls
-
-		rds_signal_deviation (int)  : min=0 max=90000 step=10 default=200 value=200 flags=slider
-			rds_program_id (int)  : min=0 max=65535 step=1 default=0 value=0
-		rds_program_type (int)  : min=0 max=31 step=1 default=0 value=0
-			rds_ps_name (str)  : min=0 max=96 step=8 value='si4713  '
-			rds_radio_text (str)  : min=0 max=384 step=32 value=''
-	audio_limiter_feature_enabled (bool) : default=1 value=1
-	audio_limiter_release_time (int)  : min=250 max=102390 step=50 default=5010 value=5010 flags=slider
-		audio_limiter_deviation (int)  : min=0 max=90000 step=10 default=66250 value=66250 flags=slider
-	audio_compression_feature_enabl (bool) : default=1 value=1
-		audio_compression_gain (int)  : min=0 max=20 step=1 default=15 value=15 flags=slider
-	audio_compression_threshold (int)  : min=-40 max=0 step=1 default=-40 value=-40 flags=slider
-	audio_compression_attack_time (int)  : min=0 max=5000 step=500 default=0 value=0 flags=slider
-	audio_compression_release_time (int)  : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider
-	pilot_tone_feature_enabled (bool) : default=1 value=1
-		pilot_tone_deviation (int)  : min=0 max=90000 step=10 default=6750 value=6750 flags=slider
-		pilot_tone_frequency (int)  : min=0 max=19000 step=1 default=19000 value=19000 flags=slider
-		pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1
-		tune_power_level (int)  : min=0 max=120 step=1 default=88 value=88 flags=slider
-		tune_antenna_capacitor (int)  : min=0 max=191 step=1 default=0 value=110 flags=slider
-
-Here is a summary of them:
-
-* Pilot is an audible tone sent by the device.
-
-- pilot_frequency - Configures the frequency of the stereo pilot tone.
-- pilot_deviation - Configures pilot tone frequency deviation level.
-- pilot_enabled - Enables or disables the pilot tone feature.
-
-* The si4713 device is capable of applying audio compression to the
-  transmitted signal.
-
-- acomp_enabled - Enables or disables the audio dynamic range control feature.
-- acomp_gain - Sets the gain for audio dynamic range control.
-- acomp_threshold - Sets the threshold level for audio dynamic range control.
-- acomp_attack_time - Sets the attack time for audio dynamic range control.
-- acomp_release_time - Sets the release time for audio dynamic range control.
-
-* Limiter setups audio deviation limiter feature. Once a over deviation occurs,
-  it is possible to adjust the front-end gain of the audio input and always
-  prevent over deviation.
-
-- limiter_enabled - Enables or disables the limiter feature.
-- limiter_deviation - Configures audio frequency deviation level.
-- limiter_release_time - Sets the limiter release time.
-
-* Tuning power
-
-- power_level - Sets the output power level for signal transmission.
-  antenna_capacitor - This selects the value of antenna tuning capacitor
-  manually or automatically if set to zero.
-
-* RDS related
-
-- rds_ps_name - Sets the RDS ps name field for transmission.
-- rds_radio_text - Sets the RDS radio text for transmission.
-- rds_pi - Sets the RDS PI field for transmission.
-- rds_pty - Sets the RDS PTY field for transmission.
-
-* Region related
-
-- preemphasis - sets the preemphasis to be applied for transmission.
-
-RNL
----
-
-This device also has an interface to measure received noise level. To do that, you should
-ioctl the device node. Here is an code of example:
-
-.. code-block:: none
-
-	int main (int argc, char *argv[])
-	{
-		struct si4713_rnl rnl;
-		int fd = open("/dev/radio0", O_RDWR);
-		int rval;
-
-		if (argc < 2)
-			return -EINVAL;
-
-		if (fd < 0)
-			return fd;
-
-		sscanf(argv[1], "%d", &rnl.frequency);
-
-		rval = ioctl(fd, SI4713_IOC_MEASURE_RNL, &rnl);
-		if (rval < 0)
-			return rval;
-
-		printf("received noise level: %d\n", rnl.rnl);
-
-		close(fd);
-	}
-
-The struct si4713_rnl and SI4713_IOC_MEASURE_RNL are defined under
-include/linux/platform_data/media/si4713.h.
-
-Stereo/Mono and RDS subchannels
--------------------------------
-
-The device can also be configured using the available sub channels for
-transmission. To do that use S/G_MODULATOR ioctl and configure txsubchans properly.
-Refer to the V4L2 API specification for proper use of this ioctl.
-
-Testing
--------
-Testing is usually done with v4l2-ctl utility for managing FM tuner cards.
-The tool can be found in v4l-dvb repository under v4l2-apps/util directory.
-
-Example for setting rds ps name:
-
-.. code-block:: none
-
-	# v4l2-ctl -d /dev/radio0 --set-ctrl=rds_ps_name="Dummy"
-
diff --git a/Documentation/media/v4l-drivers/si476x.rst b/Documentation/media/v4l-drivers/si476x.rst
deleted file mode 100644
index 87062301d6a1..000000000000
--- a/Documentation/media/v4l-drivers/si476x.rst
+++ /dev/null
@@ -1,160 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-
-The SI476x Driver
-=================
-
-Copyright |copy| 2013 Andrey Smirnov <andrew.smirnov@gmail.com>
-
-TODO for the driver
--------------------
-
-- According to the SiLabs' datasheet it is possible to update the
-  firmware of the radio chip in the run-time, thus bringing it to the
-  most recent version. Unfortunately I couldn't find any mentioning of
-  the said firmware update for the old chips that I tested the driver
-  against, so for chips like that the driver only exposes the old
-  functionality.
-
-
-Parameters exposed over debugfs
--------------------------------
-SI476x allow user to get multiple characteristics that can be very
-useful for EoL testing/RF performance estimation, parameters that have
-very little to do with V4L2 subsystem. Such parameters are exposed via
-debugfs and can be accessed via regular file I/O operations.
-
-The drivers exposes following files:
-
-* /sys/kernel/debug/<device-name>/acf
-  This file contains ACF(Automatically Controlled Features) status
-  information. The contents of the file is binary data of the
-  following layout:
-
-  .. tabularcolumns:: |p{7ex}|p{12ex}|L|
-
-  =============  ==============   ====================================
-  Offset	 Name		  Description
-  =============  ==============   ====================================
-  0x00		 blend_int	  Flag, set when stereo separation has
-				  crossed below the blend threshold
-  0x01		 hblend_int	  Flag, set when HiBlend cutoff
-				  frequency is lower than threshold
-  0x02		 hicut_int	  Flag, set when HiCut cutoff
-				  frequency is lower than threshold
-  0x03		 chbw_int	  Flag, set when channel filter
-				  bandwidth is less than threshold
-  0x04		 softmute_int	  Flag indicating that softmute
-				  attenuation has increased above
-				  softmute threshold
-  0x05		 smute		  0 - Audio is not soft muted
-				  1 - Audio is soft muted
-  0x06		 smattn		  Soft mute attenuation level in dB
-  0x07		 chbw		  Channel filter bandwidth in kHz
-  0x08		 hicut		  HiCut cutoff frequency in units of
-				  100Hz
-  0x09		 hiblend	  HiBlend cutoff frequency in units
-				  of 100 Hz
-  0x10		 pilot		  0 - Stereo pilot is not present
-				  1 - Stereo pilot is present
-  0x11		 stblend	  Stereo blend in %
-  =============  ==============   ====================================
-
-
-* /sys/kernel/debug/<device-name>/rds_blckcnt
-  This file contains statistics about RDS receptions. It's binary data
-  has the following layout:
-
-  .. tabularcolumns:: |p{7ex}|p{12ex}|L|
-
-  =============  ==============   ====================================
-  Offset	 Name		  Description
-  =============  ==============   ====================================
-  0x00		 expected	  Number of expected RDS blocks
-  0x02		 received	  Number of received RDS blocks
-  0x04		 uncorrectable	  Number of uncorrectable RDS blocks
-  =============  ==============   ====================================
-
-* /sys/kernel/debug/<device-name>/agc
-  This file contains information about parameters pertaining to
-  AGC(Automatic Gain Control)
-
-  The layout is:
-
-  .. tabularcolumns:: |p{7ex}|p{12ex}|L|
-
-  =============  ==============   ====================================
-  Offset	 Name		  Description
-  =============  ==============   ====================================
-  0x00		 mxhi		  0 - FM Mixer PD high threshold is
-				  not tripped
-				  1 - FM Mixer PD high threshold is
-				  tripped
-  0x01		 mxlo		  ditto for FM Mixer PD low
-  0x02		 lnahi		  ditto for FM LNA PD high
-  0x03		 lnalo		  ditto for FM LNA PD low
-  0x04		 fmagc1		  FMAGC1 attenuator resistance
-				  (see datasheet for more detail)
-  0x05		 fmagc2		  ditto for FMAGC2
-  0x06		 pgagain	  PGA gain in dB
-  0x07		 fmwblang	  FM/WB LNA Gain in dB
-  =============  ==============   ====================================
-
-* /sys/kernel/debug/<device-name>/rsq
-  This file contains information about parameters pertaining to
-  RSQ(Received Signal Quality)
-
-  The layout is:
-
-  .. tabularcolumns:: |p{7ex}|p{12ex}|p{60ex}|
-
-  =============  ==============   ====================================
-  Offset	 Name		  Description
-  =============  ==============   ====================================
-  0x00		 multhint	  0 - multipath value has not crossed
-				  the Multipath high threshold
-				  1 - multipath value has crossed
-				  the Multipath high threshold
-  0x01		 multlint	  ditto for Multipath low threshold
-  0x02		 snrhint	  0 - received signal's SNR has not
-				  crossed high threshold
-				  1 - received signal's SNR has
-				  crossed high threshold
-  0x03		 snrlint	  ditto for low threshold
-  0x04		 rssihint	  ditto for RSSI high threshold
-  0x05		 rssilint	  ditto for RSSI low threshold
-  0x06		 bltf		  Flag indicating if seek command
-				  reached/wrapped seek band limit
-  0x07		 snr_ready	  Indicates that SNR metrics is ready
-  0x08		 rssiready	  ditto for RSSI metrics
-  0x09		 injside	  0 - Low-side injection is being used
-				  1 - High-side injection is used
-  0x10		 afcrl		  Flag indicating if AFC rails
-  0x11		 valid		  Flag indicating if channel is valid
-  0x12		 readfreq	  Current tuned frequency
-  0x14		 freqoff	  Signed frequency offset in units of
-				  2ppm
-  0x15		 rssi		  Signed value of RSSI in dBuV
-  0x16		 snr		  Signed RF SNR in dB
-  0x17		 issi		  Signed Image Strength Signal
-				  indicator
-  0x18		 lassi		  Signed Low side adjacent Channel
-				  Strength indicator
-  0x19		 hassi		  ditto fpr High side
-  0x20		 mult		  Multipath indicator
-  0x21		 dev		  Frequency deviation
-  0x24		 assi		  Adjacent channel SSI
-  0x25		 usn		  Ultrasonic noise indicator
-  0x26		 pilotdev	  Pilot deviation in units of 100 Hz
-  0x27		 rdsdev		  ditto for RDS
-  0x28		 assidev	  ditto for ASSI
-  0x29		 strongdev	  Frequency deviation
-  0x30		 rdspi		  RDS PI code
-  =============  ==============   ====================================
-
-* /sys/kernel/debug/<device-name>/rsq_primary
-  This file contains information about parameters pertaining to
-  RSQ(Received Signal Quality) for primary tuner only. Layout is as
-  the one above.
diff --git a/Documentation/media/v4l-drivers/soc-camera.rst b/Documentation/media/v4l-drivers/soc-camera.rst
deleted file mode 100644
index 7c39711aebf8..000000000000
--- a/Documentation/media/v4l-drivers/soc-camera.rst
+++ /dev/null
@@ -1,171 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The Soc-Camera Drivers
-======================
-
-Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-
-Terminology
------------
-
-The following terms are used in this document:
- - camera / camera device / camera sensor - a video-camera sensor chip, capable
-   of connecting to a variety of systems and interfaces, typically uses i2c for
-   control and configuration, and a parallel or a serial bus for data.
- - camera host - an interface, to which a camera is connected. Typically a
-   specialised interface, present on many SoCs, e.g. PXA27x and PXA3xx, SuperH,
-   i.MX27, i.MX31.
- - camera host bus - a connection between a camera host and a camera. Can be
-   parallel or serial, consists of data and control lines, e.g. clock, vertical
-   and horizontal synchronization signals.
-
-Purpose of the soc-camera subsystem
------------------------------------
-
-The soc-camera subsystem initially provided a unified API between camera host
-drivers and camera sensor drivers. Later the soc-camera sensor API has been
-replaced with the V4L2 standard subdev API. This also made camera driver re-use
-with non-soc-camera hosts possible. The camera host API to the soc-camera core
-has been preserved.
-
-Soc-camera implements a V4L2 interface to the user, currently only the "mmap"
-method is supported by host drivers. However, the soc-camera core also provides
-support for the "read" method.
-
-The subsystem has been designed to support multiple camera host interfaces and
-multiple cameras per interface, although most applications have only one camera
-sensor.
-
-Existing drivers
-----------------
-
-As of 3.7 there are seven host drivers in the mainline: atmel-isi.c,
-mx1_camera.c (broken, scheduled for removal), mx2_camera.c, mx3_camera.c,
-omap1_camera.c, pxa_camera.c, sh_mobile_ceu_camera.c, and multiple sensor
-drivers under drivers/media/i2c/soc_camera/.
-
-Camera host API
----------------
-
-A host camera driver is registered using the
-
-.. code-block:: none
-
-	soc_camera_host_register(struct soc_camera_host *);
-
-function. The host object can be initialized as follows:
-
-.. code-block:: none
-
-	struct soc_camera_host	*ici;
-	ici->drv_name		= DRV_NAME;
-	ici->ops		= &camera_host_ops;
-	ici->priv		= pcdev;
-	ici->v4l2_dev.dev	= &pdev->dev;
-	ici->nr			= pdev->id;
-
-All camera host methods are passed in a struct soc_camera_host_ops:
-
-.. code-block:: none
-
-	static struct soc_camera_host_ops camera_host_ops = {
-		.owner		= THIS_MODULE,
-		.add		= camera_add_device,
-		.remove		= camera_remove_device,
-		.set_fmt	= camera_set_fmt_cap,
-		.try_fmt	= camera_try_fmt_cap,
-		.init_videobuf2	= camera_init_videobuf2,
-		.poll		= camera_poll,
-		.querycap	= camera_querycap,
-		.set_bus_param	= camera_set_bus_param,
-		/* The rest of host operations are optional */
-	};
-
-.add and .remove methods are called when a sensor is attached to or detached
-from the host. .set_bus_param is used to configure physical connection
-parameters between the host and the sensor. .init_videobuf2 is called by
-soc-camera core when a video-device is opened, the host driver would typically
-call vb2_queue_init() in this method. Further video-buffer management is
-implemented completely by the specific camera host driver. If the host driver
-supports non-standard pixel format conversion, it should implement a
-.get_formats and, possibly, a .put_formats operations. See below for more
-details about format conversion. The rest of the methods are called from
-respective V4L2 operations.
-
-Camera API
-----------
-
-Sensor drivers can use struct soc_camera_link, typically provided by the
-platform, and used to specify to which camera host bus the sensor is connected,
-and optionally provide platform .power and .reset methods for the camera. This
-struct is provided to the camera driver via the I2C client device platform data
-and can be obtained, using the soc_camera_i2c_to_link() macro. Care should be
-taken, when using soc_camera_vdev_to_subdev() and when accessing struct
-soc_camera_device, using v4l2_get_subdev_hostdata(): both only work, when
-running on an soc-camera host. The actual camera driver operation is implemented
-using the V4L2 subdev API. Additionally soc-camera camera drivers can use
-auxiliary soc-camera helper functions like soc_camera_power_on() and
-soc_camera_power_off(), which switch regulators, provided by the platform and call
-board-specific power switching methods. soc_camera_apply_board_flags() takes
-camera bus configuration capability flags and applies any board transformations,
-e.g. signal polarity inversion. soc_mbus_get_fmtdesc() can be used to obtain a
-pixel format descriptor, corresponding to a certain media-bus pixel format code.
-soc_camera_limit_side() can be used to restrict beginning and length of a frame
-side, based on camera capabilities.
-
-VIDIOC_S_CROP and VIDIOC_S_FMT behaviour
-----------------------------------------
-
-Above user ioctls modify image geometry as follows:
-
-VIDIOC_S_CROP: sets location and sizes of the sensor window. Unit is one sensor
-pixel. Changing sensor window sizes preserves any scaling factors, therefore
-user window sizes change as well.
-
-VIDIOC_S_FMT: sets user window. Should preserve previously set sensor window as
-much as possible by modifying scaling factors. If the sensor window cannot be
-preserved precisely, it may be changed too.
-
-In soc-camera there are two locations, where scaling and cropping can take
-place: in the camera driver and in the host driver. User ioctls are first passed
-to the host driver, which then generally passes them down to the camera driver.
-It is more efficient to perform scaling and cropping in the camera driver to
-save camera bus bandwidth and maximise the framerate. However, if the camera
-driver failed to set the required parameters with sufficient precision, the host
-driver may decide to also use its own scaling and cropping to fulfill the user's
-request.
-
-Camera drivers are interfaced to the soc-camera core and to host drivers over
-the v4l2-subdev API, which is completely functional, it doesn't pass any data.
-Therefore all camera drivers shall reply to .g_fmt() requests with their current
-output geometry. This is necessary to correctly configure the camera bus.
-.s_fmt() and .try_fmt() have to be implemented too. Sensor window and scaling
-factors have to be maintained by camera drivers internally. According to the
-V4L2 API all capture drivers must support the VIDIOC_CROPCAP ioctl, hence we
-rely on camera drivers implementing .cropcap(). If the camera driver does not
-support cropping, it may choose to not implement .s_crop(), but to enable
-cropping support by the camera host driver at least the .g_crop method must be
-implemented.
-
-User window geometry is kept in .user_width and .user_height fields in struct
-soc_camera_device and used by the soc-camera core and host drivers. The core
-updates these fields upon successful completion of a .s_fmt() call, but if these
-fields change elsewhere, e.g. during .s_crop() processing, the host driver is
-responsible for updating them.
-
-Format conversion
------------------
-
-V4L2 distinguishes between pixel formats, as they are stored in memory, and as
-they are transferred over a media bus. Soc-camera provides support to
-conveniently manage these formats. A table of standard transformations is
-maintained by soc-camera core, which describes, what FOURCC pixel format will
-be obtained, if a media-bus pixel format is stored in memory according to
-certain rules. E.g. if MEDIA_BUS_FMT_YUYV8_2X8 data is sampled with 8 bits per
-sample and stored in memory in the little-endian order with no gaps between
-bytes, data in memory will represent the V4L2_PIX_FMT_YUYV FOURCC format. These
-standard transformations will be used by soc-camera or by camera host drivers to
-configure camera drivers to produce the FOURCC format, requested by the user,
-using the VIDIOC_S_FMT ioctl(). Apart from those standard format conversions,
-host drivers can also provide their own conversion rules by implementing a
-.get_formats and, if required, a .put_formats methods.
diff --git a/Documentation/media/v4l-drivers/tm6000-cardlist.rst b/Documentation/media/v4l-drivers/tm6000-cardlist.rst
deleted file mode 100644
index 6d2769c0f4d8..000000000000
--- a/Documentation/media/v4l-drivers/tm6000-cardlist.rst
+++ /dev/null
@@ -1,83 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-TM6000 cards list
-=================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - USB IDs
-
-   * - 0
-     - Unknown tm6000 video grabber
-     -
-
-   * - 1
-     - Generic tm5600 board
-     - 6000:0001
-
-   * - 2
-     - Generic tm6000 board
-     -
-
-   * - 3
-     - Generic tm6010 board
-     - 6000:0002
-
-   * - 4
-     - 10Moons UT 821
-     -
-
-   * - 5
-     - 10Moons UT 330
-     -
-
-   * - 6
-     - ADSTECH Dual TV USB
-     - 06e1:f332
-
-   * - 7
-     - Freecom Hybrid Stick / Moka DVB-T Receiver Dual
-     - 14aa:0620
-
-   * - 8
-     - ADSTECH Mini Dual TV USB
-     - 06e1:b339
-
-   * - 9
-     - Hauppauge WinTV HVR-900H / WinTV USB2-Stick
-     - 2040:6600, 2040:6601, 2040:6610, 2040:6611
-
-   * - 10
-     - Beholder Wander DVB-T/TV/FM USB2.0
-     - 6000:dec0
-
-   * - 11
-     - Beholder Voyager TV/FM USB2.0
-     - 6000:dec1
-
-   * - 12
-     - Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick
-     - 0ccd:0086, 0ccd:00A5
-
-   * - 13
-     - Twinhan TU501(704D1)
-     - 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264
-
-   * - 14
-     - Beholder Wander Lite DVB-T/TV/FM USB2.0
-     - 6000:dec2
-
-   * - 15
-     - Beholder Voyager Lite TV/FM USB2.0
-     - 6000:dec3
-
-   * - 16
-     - Terratec Grabster AV 150/250 MX
-     - 0ccd:0079
diff --git a/Documentation/media/v4l-drivers/tuner-cardlist.rst b/Documentation/media/v4l-drivers/tuner-cardlist.rst
deleted file mode 100644
index 362617c59c5d..000000000000
--- a/Documentation/media/v4l-drivers/tuner-cardlist.rst
+++ /dev/null
@@ -1,100 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Tuner cards list
-================
-
-============ =====================================================
-Tuner number Card name
-============ =====================================================
-0            Temic PAL (4002 FH5)
-1            Philips PAL_I (FI1246 and compatibles)
-2            Philips NTSC (FI1236,FM1236 and compatibles)
-3            Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)
-4            NoTuner
-5            Philips PAL_BG (FI1216 and compatibles)
-6            Temic NTSC (4032 FY5)
-7            Temic PAL_I (4062 FY5)
-8            Temic NTSC (4036 FY5)
-9            Alps HSBH1
-10           Alps TSBE1
-11           Alps TSBB5
-12           Alps TSBE5
-13           Alps TSBC5
-14           Temic PAL_BG (4006FH5)
-15           Alps TSCH6
-16           Temic PAL_DK (4016 FY5)
-17           Philips NTSC_M (MK2)
-18           Temic PAL_I (4066 FY5)
-19           Temic PAL* auto (4006 FN5)
-20           Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)
-21           Temic NTSC (4039 FR5)
-22           Temic PAL/SECAM multi (4046 FM5)
-23           Philips PAL_DK (FI1256 and compatibles)
-24           Philips PAL/SECAM multi (FQ1216ME)
-25           LG PAL_I+FM (TAPC-I001D)
-26           LG PAL_I (TAPC-I701D)
-27           LG NTSC+FM (TPI8NSR01F)
-28           LG PAL_BG+FM (TPI8PSB01D)
-29           LG PAL_BG (TPI8PSB11D)
-30           Temic PAL* auto + FM (4009 FN5)
-31           SHARP NTSC_JP (2U5JF5540)
-32           Samsung PAL TCPM9091PD27
-33           MT20xx universal
-34           Temic PAL_BG (4106 FH5)
-35           Temic PAL_DK/SECAM_L (4012 FY5)
-36           Temic NTSC (4136 FY5)
-37           LG PAL (newer TAPC series)
-38           Philips PAL/SECAM multi (FM1216ME MK3)
-39           LG NTSC (newer TAPC series)
-40           HITACHI V7-J180AT
-41           Philips PAL_MK (FI1216 MK)
-42           Philips FCV1236D ATSC/NTSC dual in
-43           Philips NTSC MK3 (FM1236MK3 or FM1236/F)
-44           Philips 4 in 1 (ATI TV Wonder Pro/Conexant)
-45           Microtune 4049 FM5
-46           Panasonic VP27s/ENGE4324D
-47           LG NTSC (TAPE series)
-48           Tenna TNF 8831 BGFF)
-49           Microtune 4042 FI5 ATSC/NTSC dual in
-50           TCL 2002N
-51           Philips PAL/SECAM_D (FM 1256 I-H3)
-52           Thomson DTT 7610 (ATSC/NTSC)
-53           Philips FQ1286
-54           Philips/NXP TDA 8290/8295 + 8275/8275A/18271
-55           TCL 2002MB
-56           Philips PAL/SECAM multi (FQ1216AME MK4)
-57           Philips FQ1236A MK4
-58           Ymec TVision TVF-8531MF/8831MF/8731MF
-59           Ymec TVision TVF-5533MF
-60           Thomson DTT 761X (ATSC/NTSC)
-61           Tena TNF9533-D/IF/TNF9533-B/DF
-62           Philips TEA5767HN FM Radio
-63           Philips FMD1216ME MK3 Hybrid Tuner
-64           LG TDVS-H06xF
-65           Ymec TVF66T5-B/DFF
-66           LG TALN series
-67           Philips TD1316 Hybrid Tuner
-68           Philips TUV1236D ATSC/NTSC dual in
-69           Tena TNF 5335 and similar models
-70           Samsung TCPN 2121P30A
-71           Xceive xc2028/xc3028 tuner
-72           Thomson FE6600
-73           Samsung TCPG 6121P30A
-75           Philips TEA5761 FM Radio
-76           Xceive 5000 tuner
-77           TCL tuner MF02GIP-5N-E
-78           Philips FMD1216MEX MK3 Hybrid Tuner
-79           Philips PAL/SECAM multi (FM1216 MK5)
-80           Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough
-81           Partsnic (Daewoo) PTI-5NF05
-82           Philips CU1216L
-83           NXP TDA18271
-84           Sony BTF-Pxn01Z
-85           Philips FQ1236 MK5
-86           Tena TNF5337 MFD
-87           Xceive 4000 tuner
-88           Xceive 5000C tuner
-89           Sony BTF-PG472Z PAL/SECAM
-90           Sony BTF-PK467Z NTSC-M-JP
-91           Sony BTF-PB463Z NTSC-M
-============ =====================================================
diff --git a/Documentation/media/v4l-drivers/tuners.rst b/Documentation/media/v4l-drivers/tuners.rst
deleted file mode 100644
index 7509be888909..000000000000
--- a/Documentation/media/v4l-drivers/tuners.rst
+++ /dev/null
@@ -1,133 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Tuner drivers
-=============
-
-Simple tuner Programming
-------------------------
-
-There are some flavors of Tuner programming APIs.
-These differ mainly by the bandswitch byte.
-
-- L= LG_API       (VHF_LO=0x01, VHF_HI=0x02, UHF=0x08, radio=0x04)
-- P= PHILIPS_API  (VHF_LO=0xA0, VHF_HI=0x90, UHF=0x30, radio=0x04)
-- T= TEMIC_API    (VHF_LO=0x02, VHF_HI=0x04, UHF=0x01)
-- A= ALPS_API     (VHF_LO=0x14, VHF_HI=0x12, UHF=0x11)
-- M= PHILIPS_MK3  (VHF_LO=0x01, VHF_HI=0x02, UHF=0x04, radio=0x19)
-
-Tuner Manufacturers
--------------------
-
-- SAMSUNG Tuner identification: (e.g. TCPM9091PD27)
-
-.. code-block:: none
-
- TCP [ABCJLMNQ] 90[89][125] [DP] [ACD] 27 [ABCD]
- [ABCJLMNQ]:
-   A= BG+DK
-   B= BG
-   C= I+DK
-   J= NTSC-Japan
-   L= Secam LL
-   M= BG+I+DK
-   N= NTSC
-   Q= BG+I+DK+LL
- [89]: ?
- [125]:
-   2: No FM
-   5: With FM
- [DP]:
-   D= NTSC
-   P= PAL
- [ACD]:
-   A= F-connector
-   C= Phono connector
-   D= Din Jack
- [ABCD]:
-   3-wire/I2C tuning, 2-band/3-band
-
-These Tuners are PHILIPS_API compatible.
-
-Philips Tuner identification: (e.g. FM1216MF)
-
-.. code-block:: none
-
-  F[IRMQ]12[1345]6{MF|ME|MP}
-  F[IRMQ]:
-   FI12x6: Tuner Series
-   FR12x6: Tuner + Radio IF
-   FM12x6: Tuner + FM
-   FQ12x6: special
-   FMR12x6: special
-   TD15xx: Digital Tuner ATSC
-  12[1345]6:
-   1216: PAL BG
-   1236: NTSC
-   1246: PAL I
-   1256: Pal DK
-  {MF|ME|MP}
-   MF: BG LL w/ Secam (Multi France)
-   ME: BG DK I LL   (Multi Europe)
-   MP: BG DK I      (Multi PAL)
-   MR: BG DK M (?)
-   MG: BG DKI M (?)
-  MK2 series PHILIPS_API, most tuners are compatible to this one !
-  MK3 series introduced in 2002 w/ PHILIPS_MK3_API
-
-Temic Tuner identification: (.e.g 4006FH5)
-
-.. code-block:: none
-
-   4[01][0136][269]F[HYNR]5
-    40x2: Tuner (5V/33V), TEMIC_API.
-    40x6: Tuner 5V
-    41xx: Tuner compact
-    40x9: Tuner+FM compact
-   [0136]
-    xx0x: PAL BG
-    xx1x: Pal DK, Secam LL
-    xx3x: NTSC
-    xx6x: PAL I
-   F[HYNR]5
-    FH5: Pal BG
-    FY5: others
-    FN5: multistandard
-    FR5: w/ FM radio
-   3X xxxx: order number with specific connector
-  Note: Only 40x2 series has TEMIC_API, all newer tuners have PHILIPS_API.
-
-LG Innotek Tuner:
-
-- TPI8NSR11 : NTSC J/M    (TPI8NSR01 w/FM)  (P,210/497)
-- TPI8PSB11 : PAL B/G     (TPI8PSB01 w/FM)  (P,170/450)
-- TAPC-I701 : PAL I       (TAPC-I001 w/FM)  (P,170/450)
-- TPI8PSB12 : PAL D/K+B/G (TPI8PSB02 w/FM)  (P,170/450)
-- TAPC-H701P: NTSC_JP     (TAPC-H001P w/FM) (L,170/450)
-- TAPC-G701P: PAL B/G     (TAPC-G001P w/FM) (L,170/450)
-- TAPC-W701P: PAL I       (TAPC-W001P w/FM) (L,170/450)
-- TAPC-Q703P: PAL D/K     (TAPC-Q001P w/FM) (L,170/450)
-- TAPC-Q704P: PAL D/K+I   (L,170/450)
-- TAPC-G702P: PAL D/K+B/G (L,170/450)
-
-- TADC-H002F: NTSC (L,175/410?; 2-B, C-W+11, W+12-69)
-- TADC-M201D: PAL D/K+B/G+I (L,143/425)  (sound control at I2C address 0xc8)
-- TADC-T003F: NTSC Taiwan  (L,175/410?; 2-B, C-W+11, W+12-69)
-
-Suffix:
-  - P= Standard phono female socket
-  - D= IEC female socket
-  - F= F-connector
-
-Other Tuners:
-
-- TCL2002MB-1 : PAL BG + DK       =TUNER_LG_PAL_NEW_TAPC
-- TCL2002MB-1F: PAL BG + DK w/FM  =PHILIPS_PAL
-- TCL2002MI-2 : PAL I		= ??
-
-ALPS Tuners:
-
-- Most are LG_API compatible
-- TSCH6 has ALPS_API (TSCH5 ?)
-- TSBE1 has extra API 05,02,08 Control_byte=0xCB Source:[#f1]_
-
-.. [#f1] conexant100029b-PCI-Decoder-ApplicationNote.pdf
diff --git a/Documentation/media/v4l-drivers/usbvision-cardlist.rst b/Documentation/media/v4l-drivers/usbvision-cardlist.rst
deleted file mode 100644
index 6aee115ee6e2..000000000000
--- a/Documentation/media/v4l-drivers/usbvision-cardlist.rst
+++ /dev/null
@@ -1,283 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-USBvision cards list
-====================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - USB IDs
-
-   * - 0
-     - Xanboo
-     - 0a6f:0400
-
-   * - 1
-     - Belkin USB VideoBus II Adapter
-     - 050d:0106
-
-   * - 2
-     - Belkin Components USB VideoBus
-     - 050d:0207
-
-   * - 3
-     - Belkin USB VideoBus II
-     - 050d:0208
-
-   * - 4
-     - echoFX InterView Lite
-     - 0571:0002
-
-   * - 5
-     - USBGear USBG-V1 resp. HAMA USB
-     - 0573:0003
-
-   * - 6
-     - D-Link V100
-     - 0573:0400
-
-   * - 7
-     - X10 USB Camera
-     - 0573:2000
-
-   * - 8
-     - Hauppauge WinTV USB Live (PAL B/G)
-     - 0573:2d00
-
-   * - 9
-     - Hauppauge WinTV USB Live Pro (NTSC M/N)
-     - 0573:2d01
-
-   * - 10
-     - Zoran Co. PMD (Nogatech) AV-grabber Manhattan
-     - 0573:2101
-
-   * - 11
-     - Nogatech USB-TV (NTSC) FM
-     - 0573:4100
-
-   * - 12
-     - PNY USB-TV (NTSC) FM
-     - 0573:4110
-
-   * - 13
-     - PixelView PlayTv-USB PRO (PAL) FM
-     - 0573:4450
-
-   * - 14
-     - ZTV ZT-721 2.4GHz USB A/V Receiver
-     - 0573:4550
-
-   * - 15
-     - Hauppauge WinTV USB (NTSC M/N)
-     - 0573:4d00
-
-   * - 16
-     - Hauppauge WinTV USB (PAL B/G)
-     - 0573:4d01
-
-   * - 17
-     - Hauppauge WinTV USB (PAL I)
-     - 0573:4d02
-
-   * - 18
-     - Hauppauge WinTV USB (PAL/SECAM L)
-     - 0573:4d03
-
-   * - 19
-     - Hauppauge WinTV USB (PAL D/K)
-     - 0573:4d04
-
-   * - 20
-     - Hauppauge WinTV USB (NTSC FM)
-     - 0573:4d10
-
-   * - 21
-     - Hauppauge WinTV USB (PAL B/G FM)
-     - 0573:4d11
-
-   * - 22
-     - Hauppauge WinTV USB (PAL I FM)
-     - 0573:4d12
-
-   * - 23
-     - Hauppauge WinTV USB (PAL D/K FM)
-     - 0573:4d14
-
-   * - 24
-     - Hauppauge WinTV USB Pro (NTSC M/N)
-     - 0573:4d2a
-
-   * - 25
-     - Hauppauge WinTV USB Pro (NTSC M/N) V2
-     - 0573:4d2b
-
-   * - 26
-     - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L)
-     - 0573:4d2c
-
-   * - 27
-     - Hauppauge WinTV USB Pro (NTSC M/N) V3
-     - 0573:4d20
-
-   * - 28
-     - Hauppauge WinTV USB Pro (PAL B/G)
-     - 0573:4d21
-
-   * - 29
-     - Hauppauge WinTV USB Pro (PAL I)
-     - 0573:4d22
-
-   * - 30
-     - Hauppauge WinTV USB Pro (PAL/SECAM L)
-     - 0573:4d23
-
-   * - 31
-     - Hauppauge WinTV USB Pro (PAL D/K)
-     - 0573:4d24
-
-   * - 32
-     - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L)
-     - 0573:4d25
-
-   * - 33
-     - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2
-     - 0573:4d26
-
-   * - 34
-     - Hauppauge WinTV USB Pro (PAL B/G) V2
-     - 0573:4d27
-
-   * - 35
-     - Hauppauge WinTV USB Pro (PAL B/G,D/K)
-     - 0573:4d28
-
-   * - 36
-     - Hauppauge WinTV USB Pro (PAL I,D/K)
-     - 0573:4d29
-
-   * - 37
-     - Hauppauge WinTV USB Pro (NTSC M/N FM)
-     - 0573:4d30
-
-   * - 38
-     - Hauppauge WinTV USB Pro (PAL B/G FM)
-     - 0573:4d31
-
-   * - 39
-     - Hauppauge WinTV USB Pro (PAL I FM)
-     - 0573:4d32
-
-   * - 40
-     - Hauppauge WinTV USB Pro (PAL D/K FM)
-     - 0573:4d34
-
-   * - 41
-     - Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM)
-     - 0573:4d35
-
-   * - 42
-     - Hauppauge WinTV USB Pro (Temic PAL B/G FM)
-     - 0573:4d36
-
-   * - 43
-     - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM)
-     - 0573:4d37
-
-   * - 44
-     - Hauppauge WinTV USB Pro (NTSC M/N FM) V2
-     - 0573:4d38
-
-   * - 45
-     - Camtel Technology USB TV Genie Pro FM Model TVB330
-     - 0768:0006
-
-   * - 46
-     - Digital Video Creator I
-     - 07d0:0001
-
-   * - 47
-     - Global Village GV-007 (NTSC)
-     - 07d0:0002
-
-   * - 48
-     - Dazzle Fusion Model DVC-50 Rev 1 (NTSC)
-     - 07d0:0003
-
-   * - 49
-     - Dazzle Fusion Model DVC-80 Rev 1 (PAL)
-     - 07d0:0004
-
-   * - 50
-     - Dazzle Fusion Model DVC-90 Rev 1 (SECAM)
-     - 07d0:0005
-
-   * - 51
-     - Eskape Labs MyTV2Go
-     - 07f8:9104
-
-   * - 52
-     - Pinnacle Studio PCTV USB (PAL)
-     - 2304:010d
-
-   * - 53
-     - Pinnacle Studio PCTV USB (SECAM)
-     - 2304:0109
-
-   * - 54
-     - Pinnacle Studio PCTV USB (PAL) FM
-     - 2304:0110
-
-   * - 55
-     - Miro PCTV USB
-     - 2304:0111
-
-   * - 56
-     - Pinnacle Studio PCTV USB (NTSC) FM
-     - 2304:0112
-
-   * - 57
-     - Pinnacle Studio PCTV USB (PAL) FM V2
-     - 2304:0210
-
-   * - 58
-     - Pinnacle Studio PCTV USB (NTSC) FM V2
-     - 2304:0212
-
-   * - 59
-     - Pinnacle Studio PCTV USB (PAL) FM V3
-     - 2304:0214
-
-   * - 60
-     - Pinnacle Studio Linx Video input cable (NTSC)
-     - 2304:0300
-
-   * - 61
-     - Pinnacle Studio Linx Video input cable (PAL)
-     - 2304:0301
-
-   * - 62
-     - Pinnacle PCTV Bungee USB (PAL) FM
-     - 2304:0419
-
-   * - 63
-     - Hauppauge WinTv-USB
-     - 2400:4200
-
-   * - 64
-     - Pinnacle Studio PCTV USB (NTSC) FM V3
-     - 2304:0113
-
-   * - 65
-     - Nogatech USB MicroCam NTSC (NV3000N)
-     - 0573:3000
-
-   * - 66
-     - Nogatech USB MicroCam PAL (NV3001P)
-     - 0573:3001
diff --git a/Documentation/media/v4l-drivers/uvcvideo.rst b/Documentation/media/v4l-drivers/uvcvideo.rst
deleted file mode 100644
index e5fd8fad333c..000000000000
--- a/Documentation/media/v4l-drivers/uvcvideo.rst
+++ /dev/null
@@ -1,257 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The Linux USB Video Class (UVC) driver
-======================================
-
-This file documents some driver-specific aspects of the UVC driver, such as
-driver-specific ioctls and implementation notes.
-
-Questions and remarks can be sent to the Linux UVC development mailing list at
-linux-uvc-devel@lists.berlios.de.
-
-
-Extension Unit (XU) support
----------------------------
-
-Introduction
-~~~~~~~~~~~~
-
-The UVC specification allows for vendor-specific extensions through extension
-units (XUs). The Linux UVC driver supports extension unit controls (XU controls)
-through two separate mechanisms:
-
-  - through mappings of XU controls to V4L2 controls
-  - through a driver-specific ioctl interface
-
-The first one allows generic V4L2 applications to use XU controls by mapping
-certain XU controls onto V4L2 controls, which then show up during ordinary
-control enumeration.
-
-The second mechanism requires uvcvideo-specific knowledge for the application to
-access XU controls but exposes the entire UVC XU concept to user space for
-maximum flexibility.
-
-Both mechanisms complement each other and are described in more detail below.
-
-
-Control mappings
-~~~~~~~~~~~~~~~~
-
-The UVC driver provides an API for user space applications to define so-called
-control mappings at runtime. These allow for individual XU controls or byte
-ranges thereof to be mapped to new V4L2 controls. Such controls appear and
-function exactly like normal V4L2 controls (i.e. the stock controls, such as
-brightness, contrast, etc.). However, reading or writing of such a V4L2 controls
-triggers a read or write of the associated XU control.
-
-The ioctl used to create these control mappings is called UVCIOC_CTRL_MAP.
-Previous driver versions (before 0.2.0) required another ioctl to be used
-beforehand (UVCIOC_CTRL_ADD) to pass XU control information to the UVC driver.
-This is no longer necessary as newer uvcvideo versions query the information
-directly from the device.
-
-For details on the UVCIOC_CTRL_MAP ioctl please refer to the section titled
-"IOCTL reference" below.
-
-
-3. Driver specific XU control interface
-
-For applications that need to access XU controls directly, e.g. for testing
-purposes, firmware upload, or accessing binary controls, a second mechanism to
-access XU controls is provided in the form of a driver-specific ioctl, namely
-UVCIOC_CTRL_QUERY.
-
-A call to this ioctl allows applications to send queries to the UVC driver that
-directly map to the low-level UVC control requests.
-
-In order to make such a request the UVC unit ID of the control's extension unit
-and the control selector need to be known. This information either needs to be
-hardcoded in the application or queried using other ways such as by parsing the
-UVC descriptor or, if available, using the media controller API to enumerate a
-device's entities.
-
-Unless the control size is already known it is necessary to first make a
-UVC_GET_LEN requests in order to be able to allocate a sufficiently large buffer
-and set the buffer size to the correct value. Similarly, to find out whether
-UVC_GET_CUR or UVC_SET_CUR are valid requests for a given control, a
-UVC_GET_INFO request should be made. The bits 0 (GET supported) and 1 (SET
-supported) of the resulting byte indicate which requests are valid.
-
-With the addition of the UVCIOC_CTRL_QUERY ioctl the UVCIOC_CTRL_GET and
-UVCIOC_CTRL_SET ioctls have become obsolete since their functionality is a
-subset of the former ioctl. For the time being they are still supported but
-application developers are encouraged to use UVCIOC_CTRL_QUERY instead.
-
-For details on the UVCIOC_CTRL_QUERY ioctl please refer to the section titled
-"IOCTL reference" below.
-
-
-Security
-~~~~~~~~
-
-The API doesn't currently provide a fine-grained access control facility. The
-UVCIOC_CTRL_ADD and UVCIOC_CTRL_MAP ioctls require super user permissions.
-
-Suggestions on how to improve this are welcome.
-
-
-Debugging
-~~~~~~~~~
-
-In order to debug problems related to XU controls or controls in general it is
-recommended to enable the UVC_TRACE_CONTROL bit in the module parameter 'trace'.
-This causes extra output to be written into the system log.
-
-
-IOCTL reference
-~~~~~~~~~~~~~~~
-
-UVCIOC_CTRL_MAP - Map a UVC control to a V4L2 control
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Argument: struct uvc_xu_control_mapping
-
-**Description**:
-
-	This ioctl creates a mapping between a UVC control or part of a UVC
-	control and a V4L2 control. Once mappings are defined, userspace
-	applications can access vendor-defined UVC control through the V4L2
-	control API.
-
-	To create a mapping, applications fill the uvc_xu_control_mapping
-	structure with information about an existing UVC control defined with
-	UVCIOC_CTRL_ADD and a new V4L2 control.
-
-	A UVC control can be mapped to several V4L2 controls. For instance,
-	a UVC pan/tilt control could be mapped to separate pan and tilt V4L2
-	controls. The UVC control is divided into non overlapping fields using
-	the 'size' and 'offset' fields and are then independently mapped to
-	V4L2 control.
-
-	For signed integer V4L2 controls the data_type field should be set to
-	UVC_CTRL_DATA_TYPE_SIGNED. Other values are currently ignored.
-
-**Return value**:
-
-	On success 0 is returned. On error -1 is returned and errno is set
-	appropriately.
-
-	ENOMEM
-		Not enough memory to perform the operation.
-	EPERM
-		Insufficient privileges (super user privileges are required).
-	EINVAL
-		No such UVC control.
-	EOVERFLOW
-		The requested offset and size would overflow the UVC control.
-	EEXIST
-		Mapping already exists.
-
-**Data types**:
-
-.. code-block:: none
-
-	* struct uvc_xu_control_mapping
-
-	__u32	id		V4L2 control identifier
-	__u8	name[32]	V4L2 control name
-	__u8	entity[16]	UVC extension unit GUID
-	__u8	selector	UVC control selector
-	__u8	size		V4L2 control size (in bits)
-	__u8	offset		V4L2 control offset (in bits)
-	enum v4l2_ctrl_type
-		v4l2_type	V4L2 control type
-	enum uvc_control_data_type
-		data_type	UVC control data type
-	struct uvc_menu_info
-		*menu_info	Array of menu entries (for menu controls only)
-	__u32	menu_count	Number of menu entries (for menu controls only)
-
-	* struct uvc_menu_info
-
-	__u32	value		Menu entry value used by the device
-	__u8	name[32]	Menu entry name
-
-
-	* enum uvc_control_data_type
-
-	UVC_CTRL_DATA_TYPE_RAW		Raw control (byte array)
-	UVC_CTRL_DATA_TYPE_SIGNED	Signed integer
-	UVC_CTRL_DATA_TYPE_UNSIGNED	Unsigned integer
-	UVC_CTRL_DATA_TYPE_BOOLEAN	Boolean
-	UVC_CTRL_DATA_TYPE_ENUM		Enumeration
-	UVC_CTRL_DATA_TYPE_BITMASK	Bitmask
-
-
-UVCIOC_CTRL_QUERY - Query a UVC XU control
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Argument: struct uvc_xu_control_query
-
-**Description**:
-
-	This ioctl queries a UVC XU control identified by its extension unit ID
-	and control selector.
-
-	There are a number of different queries available that closely
-	correspond to the low-level control requests described in the UVC
-	specification. These requests are:
-
-	UVC_GET_CUR
-		Obtain the current value of the control.
-	UVC_GET_MIN
-		Obtain the minimum value of the control.
-	UVC_GET_MAX
-		Obtain the maximum value of the control.
-	UVC_GET_DEF
-		Obtain the default value of the control.
-	UVC_GET_RES
-		Query the resolution of the control, i.e. the step size of the
-		allowed control values.
-	UVC_GET_LEN
-		Query the size of the control in bytes.
-	UVC_GET_INFO
-		Query the control information bitmap, which indicates whether
-		get/set requests are supported.
-	UVC_SET_CUR
-		Update the value of the control.
-
-	Applications must set the 'size' field to the correct length for the
-	control. Exceptions are the UVC_GET_LEN and UVC_GET_INFO queries, for
-	which the size must be set to 2 and 1, respectively. The 'data' field
-	must point to a valid writable buffer big enough to hold the indicated
-	number of data bytes.
-
-	Data is copied directly from the device without any driver-side
-	processing. Applications are responsible for data buffer formatting,
-	including little-endian/big-endian conversion. This is particularly
-	important for the result of the UVC_GET_LEN requests, which is always
-	returned as a little-endian 16-bit integer by the device.
-
-**Return value**:
-
-	On success 0 is returned. On error -1 is returned and errno is set
-	appropriately.
-
-	ENOENT
-		The device does not support the given control or the specified
-		extension unit could not be found.
-	ENOBUFS
-		The specified buffer size is incorrect (too big or too small).
-	EINVAL
-		An invalid request code was passed.
-	EBADRQC
-		The given request is not supported by the given control.
-	EFAULT
-		The data pointer references an inaccessible memory area.
-
-**Data types**:
-
-.. code-block:: none
-
-	* struct uvc_xu_control_query
-
-	__u8	unit		Extension unit ID
-	__u8	selector	Control selector
-	__u8	query		Request code to send to the device
-	__u16	size		Control data size (in bytes)
-	__u8	*data		Control value
diff --git a/Documentation/media/v4l-drivers/v4l-with-ir.rst b/Documentation/media/v4l-drivers/v4l-with-ir.rst
deleted file mode 100644
index ce23c8a7bc93..000000000000
--- a/Documentation/media/v4l-drivers/v4l-with-ir.rst
+++ /dev/null
@@ -1,75 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Infrared remote control support in video4linux drivers
-======================================================
-
-Authors: Gerd Hoffmann, Mauro Carvalho Chehab
-
-Basics
-------
-
-Most analog and digital TV boards support remote controllers. Several of
-them have a microprocessor that receives the IR carriers, convert into
-pulse/space sequences and then to scan codes, returning such codes to
-userspace ("scancode mode"). Other boards return just the pulse/space
-sequences ("raw mode").
-
-The support for remote controller in scancode mode is provided by the
-standard Linux input layer. The support for raw mode is provided via LIRC.
-
-In order to check the support and test it, it is suggested to download
-the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_. It provides
-two tools to handle remote controllers:
-
-- ir-keytable: provides a way to query the remote controller, list the
-  protocols it supports, enable in-kernel support for IR decoder or
-  switch the protocol and to test the reception of scan codes;
-
-- ir-ctl: provide tools to handle remote controllers that support raw mode
-  via LIRC interface.
-
-Usually, the remote controller module is auto-loaded when the TV card is
-detected. However, for a few devices, you need to manually load the
-ir-kbd-i2c module.
-
-How it works
-------------
-
-The modules register the remote as keyboard within the linux input
-layer, i.e. you'll see the keys of the remote as normal key strokes
-(if CONFIG_INPUT_KEYBOARD is enabled).
-
-Using the event devices (CONFIG_INPUT_EVDEV) it is possible for
-applications to access the remote via /dev/input/event<n> devices.
-The udev/systemd will automatically create the devices. If you install
-the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_, it may also
-automatically load a different keytable than the default one. Please see
-`v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ ir-keytable.1
-man page for details.
-
-The ir-keytable tool is nice for trouble shooting, i.e. to check
-whenever the input device is really present, which of the devices it
-is, check whenever pressing keys on the remote actually generates
-events and the like.  You can also use any other input utility that changes
-the keymaps, like the input kbd utility.
-
-
-Using with lircd
-================
-
-The latest versions of the lircd daemon supports reading events from the
-linux input layer (via event device). It also supports receiving IR codes
-in lirc mode.
-
-
-Using without lircd
-===================
-
-Xorg recognizes several IR keycodes that have its numerical value lower
-than 247. With the advent of Wayland, the input driver got updated too,
-and should now accept all keycodes. Yet, you may want to just reasign
-the keycodes to something that your favorite media application likes.
-
-This can be done by setting
-`v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ to load your own
-keytable in runtime. Please read  ir-keytable.1 man page for details.
diff --git a/Documentation/media/v4l-drivers/vimc.dot b/Documentation/media/v4l-drivers/vimc.dot
deleted file mode 100644
index 57863a13fa39..000000000000
--- a/Documentation/media/v4l-drivers/vimc.dot
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-digraph board {
-	rankdir=TB
-	n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000001:port0 -> n00000005:port0 [style=bold]
-	n00000001:port0 -> n0000000b [style=bold]
-	n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000003:port0 -> n00000008:port0 [style=bold]
-	n00000003:port0 -> n0000000f [style=bold]
-	n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000005:port1 -> n00000017:port0
-	n00000008 [label="{{<port0> 0} | Debayer B\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000008:port1 -> n00000017:port0 [style=dashed]
-	n0000000b [label="Raw Capture 0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
-	n0000000f [label="Raw Capture 1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
-	n00000013 [label="RGB/YUV Input\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
-	n00000013 -> n00000017:port0 [style=dashed]
-	n00000017 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000017:port1 -> n0000001a [style=bold]
-	n0000001a [label="RGB/YUV Capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
-}
diff --git a/Documentation/media/v4l-drivers/vimc.rst b/Documentation/media/v4l-drivers/vimc.rst
deleted file mode 100644
index 8f5d7f8d83bb..000000000000
--- a/Documentation/media/v4l-drivers/vimc.rst
+++ /dev/null
@@ -1,101 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The Virtual Media Controller Driver (vimc)
-==========================================
-
-The vimc driver emulates complex video hardware using the V4L2 API and the Media
-API. It has a capture device and three subdevices: sensor, debayer and scaler.
-
-Topology
---------
-
-The topology is hardcoded, although you could modify it in vimc-core and
-recompile the driver to achieve your own topology. This is the default topology:
-
-.. _vimc_topology_graph:
-
-.. kernel-figure:: vimc.dot
-    :alt:   Diagram of the default media pipeline topology
-    :align: center
-
-    Media pipeline graph on vimc
-
-Configuring the topology
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Each subdevice will come with its default configuration (pixelformat, height,
-width, ...). One needs to configure the topology in order to match the
-configuration on each linked subdevice to stream frames through the pipeline.
-If the configuration doesn't match, the stream will fail. The ``v4l-utils``
-package is a bundle of user-space applications, that comes with ``media-ctl`` and
-``v4l2-ctl`` that can be used to configure the vimc configuration. This sequence
-of commands fits for the default topology:
-
-.. code-block:: bash
-
-        media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
-        media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
-        media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
-        media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
-        v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
-        v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
-        v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
-
-Subdevices
-----------
-
-Subdevices define the behavior of an entity in the topology. Depending on the
-subdevice, the entity can have multiple pads of type source or sink.
-
-vimc-sensor:
-	Generates images in several formats using video test pattern generator.
-	Exposes:
-
-	* 1 Pad source
-
-vimc-debayer:
-	Transforms images in bayer format into a non-bayer format.
-	Exposes:
-
-	* 1 Pad sink
-	* 1 Pad source
-
-vimc-scaler:
-	Scale up the image by a factor of 3. E.g.: a 640x480 image becomes a
-        1920x1440 image. (this value can be configured, see at
-        `Module options`_).
-	Exposes:
-
-	* 1 Pad sink
-	* 1 Pad source
-
-vimc-capture:
-	Exposes node /dev/videoX to allow userspace to capture the stream.
-	Exposes:
-
-	* 1 Pad sink
-	* 1 Pad source
-
-
-Module options
---------------
-
-Vimc has a module parameter to configure the driver.
-
-* ``sca_mult=<unsigned int>``
-
-        Image size multiplier factor to be used to multiply both width and
-        height, so the image size will be ``sca_mult^2`` bigger than the
-        original one. Currently, only supports scaling up (the default value
-        is 3).
-
-Source code documentation
--------------------------
-
-vimc-streamer
-~~~~~~~~~~~~~
-
-.. kernel-doc:: drivers/media/platform/vimc/vimc-streamer.h
-   :internal:
-
-.. kernel-doc:: drivers/media/platform/vimc/vimc-streamer.c
diff --git a/Documentation/media/v4l-drivers/vivid.rst b/Documentation/media/v4l-drivers/vivid.rst
deleted file mode 100644
index 52e57b773f07..000000000000
--- a/Documentation/media/v4l-drivers/vivid.rst
+++ /dev/null
@@ -1,1393 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The Virtual Video Test Driver (vivid)
-=====================================
-
-This driver emulates video4linux hardware of various types: video capture, video
-output, vbi capture and output, metadata capture and output, radio receivers and
-transmitters, touch capture and a software defined radio receiver. In addition a
-simple framebuffer device is available for testing capture and output overlays.
-
-Up to 64 vivid instances can be created, each with up to 16 inputs and 16 outputs.
-
-Each input can be a webcam, TV capture device, S-Video capture device or an HDMI
-capture device. Each output can be an S-Video output device or an HDMI output
-device.
-
-These inputs and outputs act exactly as a real hardware device would behave. This
-allows you to use this driver as a test input for application development, since
-you can test the various features without requiring special hardware.
-
-This document describes the features implemented by this driver:
-
-- Support for read()/write(), MMAP, USERPTR and DMABUF streaming I/O.
-- A large list of test patterns and variations thereof
-- Working brightness, contrast, saturation and hue controls
-- Support for the alpha color component
-- Full colorspace support, including limited/full RGB range
-- All possible control types are present
-- Support for various pixel aspect ratios and video aspect ratios
-- Error injection to test what happens if errors occur
-- Supports crop/compose/scale in any combination for both input and output
-- Can emulate up to 4K resolutions
-- All Field settings are supported for testing interlaced capturing
-- Supports all standard YUV and RGB formats, including two multiplanar YUV formats
-- Raw and Sliced VBI capture and output support
-- Radio receiver and transmitter support, including RDS support
-- Software defined radio (SDR) support
-- Capture and output overlay support
-- Metadata capture and output support
-- Touch capture support
-
-These features will be described in more detail below.
-
-Configuring the driver
-----------------------
-
-By default the driver will create a single instance that has a video capture
-device with webcam, TV, S-Video and HDMI inputs, a video output device with
-S-Video and HDMI outputs, one vbi capture device, one vbi output device, one
-radio receiver device, one radio transmitter device and one SDR device.
-
-The number of instances, devices, video inputs and outputs and their types are
-all configurable using the following module options:
-
-- n_devs:
-
-	number of driver instances to create. By default set to 1. Up to 64
-	instances can be created.
-
-- node_types:
-
-	which devices should each driver instance create. An array of
-	hexadecimal values, one for each instance. The default is 0x1d3d.
-	Each value is a bitmask with the following meaning:
-
-		- bit 0: Video Capture node
-		- bit 2-3: VBI Capture node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both
-		- bit 4: Radio Receiver node
-		- bit 5: Software Defined Radio Receiver node
-		- bit 8: Video Output node
-		- bit 10-11: VBI Output node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both
-		- bit 12: Radio Transmitter node
-		- bit 16: Framebuffer for testing overlays
-		- bit 17: Metadata Capture node
-		- bit 18: Metadata Output node
-		- bit 19: Touch Capture node
-
-	So to create four instances, the first two with just one video capture
-	device, the second two with just one video output device you would pass
-	these module options to vivid:
-
-	.. code-block:: none
-
-		n_devs=4 node_types=0x1,0x1,0x100,0x100
-
-- num_inputs:
-
-	the number of inputs, one for each instance. By default 4 inputs
-	are created for each video capture device. At most 16 inputs can be created,
-	and there must be at least one.
-
-- input_types:
-
-	the input types for each instance, the default is 0xe4. This defines
-	what the type of each input is when the inputs are created for each driver
-	instance. This is a hexadecimal value with up to 16 pairs of bits, each
-	pair gives the type and bits 0-1 map to input 0, bits 2-3 map to input 1,
-	30-31 map to input 15. Each pair of bits has the following meaning:
-
-		- 00: this is a webcam input
-		- 01: this is a TV tuner input
-		- 10: this is an S-Video input
-		- 11: this is an HDMI input
-
-	So to create a video capture device with 8 inputs where input 0 is a TV
-	tuner, inputs 1-3 are S-Video inputs and inputs 4-7 are HDMI inputs you
-	would use the following module options:
-
-	.. code-block:: none
-
-		num_inputs=8 input_types=0xffa9
-
-- num_outputs:
-
-	the number of outputs, one for each instance. By default 2 outputs
-	are created for each video output device. At most 16 outputs can be
-	created, and there must be at least one.
-
-- output_types:
-
-	the output types for each instance, the default is 0x02. This defines
-	what the type of each output is when the outputs are created for each
-	driver instance. This is a hexadecimal value with up to 16 bits, each bit
-	gives the type and bit 0 maps to output 0, bit 1 maps to output 1, bit
-	15 maps to output 15. The meaning of each bit is as follows:
-
-		- 0: this is an S-Video output
-		- 1: this is an HDMI output
-
-	So to create a video output device with 8 outputs where outputs 0-3 are
-	S-Video outputs and outputs 4-7 are HDMI outputs you would use the
-	following module options:
-
-	.. code-block:: none
-
-		num_outputs=8 output_types=0xf0
-
-- vid_cap_nr:
-
-	give the desired videoX start number for each video capture device.
-	The default is -1 which will just take the first free number. This allows
-	you to map capture video nodes to specific videoX device nodes. Example:
-
-	.. code-block:: none
-
-		n_devs=4 vid_cap_nr=2,4,6,8
-
-	This will attempt to assign /dev/video2 for the video capture device of
-	the first vivid instance, video4 for the next up to video8 for the last
-	instance. If it can't succeed, then it will just take the next free
-	number.
-
-- vid_out_nr:
-
-	give the desired videoX start number for each video output device.
-	The default is -1 which will just take the first free number.
-
-- vbi_cap_nr:
-
-	give the desired vbiX start number for each vbi capture device.
-	The default is -1 which will just take the first free number.
-
-- vbi_out_nr:
-
-	give the desired vbiX start number for each vbi output device.
-	The default is -1 which will just take the first free number.
-
-- radio_rx_nr:
-
-	give the desired radioX start number for each radio receiver device.
-	The default is -1 which will just take the first free number.
-
-- radio_tx_nr:
-
-	give the desired radioX start number for each radio transmitter
-	device. The default is -1 which will just take the first free number.
-
-- sdr_cap_nr:
-
-	give the desired swradioX start number for each SDR capture device.
-	The default is -1 which will just take the first free number.
-
-- meta_cap_nr:
-
-        give the desired videoX start number for each metadata capture device.
-        The default is -1 which will just take the first free number.
-
-- meta_out_nr:
-
-        give the desired videoX start number for each metadata output device.
-        The default is -1 which will just take the first free number.
-
-- touch_cap_nr:
-
-        give the desired v4l-touchX start number for each touch capture device.
-        The default is -1 which will just take the first free number.
-
-- ccs_cap_mode:
-
-	specify the allowed video capture crop/compose/scaling combination
-	for each driver instance. Video capture devices can have any combination
-	of cropping, composing and scaling capabilities and this will tell the
-	vivid driver which of those is should emulate. By default the user can
-	select this through controls.
-
-	The value is either -1 (controlled by the user) or a set of three bits,
-	each enabling (1) or disabling (0) one of the features:
-
-	- bit 0:
-
-		Enable crop support. Cropping will take only part of the
-		incoming picture.
-	- bit 1:
-
-		Enable compose support. Composing will copy the incoming
-		picture into a larger buffer.
-
-	- bit 2:
-
-		Enable scaling support. Scaling can scale the incoming
-		picture. The scaler of the vivid driver can enlarge up
-		or down to four times the original size. The scaler is
-		very simple and low-quality. Simplicity and speed were
-		key, not quality.
-
-	Note that this value is ignored by webcam inputs: those enumerate
-	discrete framesizes and that is incompatible with cropping, composing
-	or scaling.
-
-- ccs_out_mode:
-
-	specify the allowed video output crop/compose/scaling combination
-	for each driver instance. Video output devices can have any combination
-	of cropping, composing and scaling capabilities and this will tell the
-	vivid driver which of those is should emulate. By default the user can
-	select this through controls.
-
-	The value is either -1 (controlled by the user) or a set of three bits,
-	each enabling (1) or disabling (0) one of the features:
-
-	- bit 0:
-
-		Enable crop support. Cropping will take only part of the
-		outgoing buffer.
-
-	- bit 1:
-
-		Enable compose support. Composing will copy the incoming
-		buffer into a larger picture frame.
-
-	- bit 2:
-
-		Enable scaling support. Scaling can scale the incoming
-		buffer. The scaler of the vivid driver can enlarge up
-		or down to four times the original size. The scaler is
-		very simple and low-quality. Simplicity and speed were
-		key, not quality.
-
-- multiplanar:
-
-	select whether each device instance supports multi-planar formats,
-	and thus the V4L2 multi-planar API. By default device instances are
-	single-planar.
-
-	This module option can override that for each instance. Values are:
-
-		- 1: this is a single-planar instance.
-		- 2: this is a multi-planar instance.
-
-- vivid_debug:
-
-	enable driver debugging info
-
-- no_error_inj:
-
-	if set disable the error injecting controls. This option is
-	needed in order to run a tool like v4l2-compliance. Tools like that
-	exercise all controls including a control like 'Disconnect' which
-	emulates a USB disconnect, making the device inaccessible and so
-	all tests that v4l2-compliance is doing will fail afterwards.
-
-	There may be other situations as well where you want to disable the
-	error injection support of vivid. When this option is set, then the
-	controls that select crop, compose and scale behavior are also
-	removed. Unless overridden by ccs_cap_mode and/or ccs_out_mode the
-	will default to enabling crop, compose and scaling.
-
-- allocators:
-
-	memory allocator selection, default is 0. It specifies the way buffers
-	will be allocated.
-
-		- 0: vmalloc
-		- 1: dma-contig
-
-Taken together, all these module options allow you to precisely customize
-the driver behavior and test your application with all sorts of permutations.
-It is also very suitable to emulate hardware that is not yet available, e.g.
-when developing software for a new upcoming device.
-
-
-Video Capture
--------------
-
-This is probably the most frequently used feature. The video capture device
-can be configured by using the module options num_inputs, input_types and
-ccs_cap_mode (see section 1 for more detailed information), but by default
-four inputs are configured: a webcam, a TV tuner, an S-Video and an HDMI
-input, one input for each input type. Those are described in more detail
-below.
-
-Special attention has been given to the rate at which new frames become
-available. The jitter will be around 1 jiffie (that depends on the HZ
-configuration of your kernel, so usually 1/100, 1/250 or 1/1000 of a second),
-but the long-term behavior is exactly following the framerate. So a
-framerate of 59.94 Hz is really different from 60 Hz. If the framerate
-exceeds your kernel's HZ value, then you will get dropped frames, but the
-frame/field sequence counting will keep track of that so the sequence
-count will skip whenever frames are dropped.
-
-
-Webcam Input
-~~~~~~~~~~~~
-
-The webcam input supports three framesizes: 320x180, 640x360 and 1280x720. It
-supports frames per second settings of 10, 15, 25, 30, 50 and 60 fps. Which ones
-are available depends on the chosen framesize: the larger the framesize, the
-lower the maximum frames per second.
-
-The initially selected colorspace when you switch to the webcam input will be
-sRGB.
-
-
-TV and S-Video Inputs
-~~~~~~~~~~~~~~~~~~~~~
-
-The only difference between the TV and S-Video input is that the TV has a
-tuner. Otherwise they behave identically.
-
-These inputs support audio inputs as well: one TV and one Line-In. They
-both support all TV standards. If the standard is queried, then the Vivid
-controls 'Standard Signal Mode' and 'Standard' determine what
-the result will be.
-
-These inputs support all combinations of the field setting. Special care has
-been taken to faithfully reproduce how fields are handled for the different
-TV standards. This is particularly noticeable when generating a horizontally
-moving image so the temporal effect of using interlaced formats becomes clearly
-visible. For 50 Hz standards the top field is the oldest and the bottom field
-is the newest in time. For 60 Hz standards that is reversed: the bottom field
-is the oldest and the top field is the newest in time.
-
-When you start capturing in V4L2_FIELD_ALTERNATE mode the first buffer will
-contain the top field for 50 Hz standards and the bottom field for 60 Hz
-standards. This is what capture hardware does as well.
-
-Finally, for PAL/SECAM standards the first half of the top line contains noise.
-This simulates the Wide Screen Signal that is commonly placed there.
-
-The initially selected colorspace when you switch to the TV or S-Video input
-will be SMPTE-170M.
-
-The pixel aspect ratio will depend on the TV standard. The video aspect ratio
-can be selected through the 'Standard Aspect Ratio' Vivid control.
-Choices are '4x3', '16x9' which will give letterboxed widescreen video and
-'16x9 Anamorphic' which will give full screen squashed anamorphic widescreen
-video that will need to be scaled accordingly.
-
-The TV 'tuner' supports a frequency range of 44-958 MHz. Channels are available
-every 6 MHz, starting from 49.25 MHz. For each channel the generated image
-will be in color for the +/- 0.25 MHz around it, and in grayscale for
-+/- 1 MHz around the channel. Beyond that it is just noise. The VIDIOC_G_TUNER
-ioctl will return 100% signal strength for +/- 0.25 MHz and 50% for +/- 1 MHz.
-It will also return correct afc values to show whether the frequency is too
-low or too high.
-
-The audio subchannels that are returned are MONO for the +/- 1 MHz range around
-a valid channel frequency. When the frequency is within +/- 0.25 MHz of the
-channel it will return either MONO, STEREO, either MONO | SAP (for NTSC) or
-LANG1 | LANG2 (for others), or STEREO | SAP.
-
-Which one is returned depends on the chosen channel, each next valid channel
-will cycle through the possible audio subchannel combinations. This allows
-you to test the various combinations by just switching channels..
-
-Finally, for these inputs the v4l2_timecode struct is filled in in the
-dequeued v4l2_buffer struct.
-
-
-HDMI Input
-~~~~~~~~~~
-
-The HDMI inputs supports all CEA-861 and DMT timings, both progressive and
-interlaced, for pixelclock frequencies between 25 and 600 MHz. The field
-mode for interlaced formats is always V4L2_FIELD_ALTERNATE. For HDMI the
-field order is always top field first, and when you start capturing an
-interlaced format you will receive the top field first.
-
-The initially selected colorspace when you switch to the HDMI input or
-select an HDMI timing is based on the format resolution: for resolutions
-less than or equal to 720x576 the colorspace is set to SMPTE-170M, for
-others it is set to REC-709 (CEA-861 timings) or sRGB (VESA DMT timings).
-
-The pixel aspect ratio will depend on the HDMI timing: for 720x480 is it
-set as for the NTSC TV standard, for 720x576 it is set as for the PAL TV
-standard, and for all others a 1:1 pixel aspect ratio is returned.
-
-The video aspect ratio can be selected through the 'DV Timings Aspect Ratio'
-Vivid control. Choices are 'Source Width x Height' (just use the
-same ratio as the chosen format), '4x3' or '16x9', either of which can
-result in pillarboxed or letterboxed video.
-
-For HDMI inputs it is possible to set the EDID. By default a simple EDID
-is provided. You can only set the EDID for HDMI inputs. Internally, however,
-the EDID is shared between all HDMI inputs.
-
-No interpretation is done of the EDID data with the exception of the
-physical address. See the CEC section for more details.
-
-There is a maximum of 15 HDMI inputs (if there are more, then they will be
-reduced to 15) since that's the limitation of the EDID physical address.
-
-
-Video Output
-------------
-
-The video output device can be configured by using the module options
-num_outputs, output_types and ccs_out_mode (see section 1 for more detailed
-information), but by default two outputs are configured: an S-Video and an
-HDMI input, one output for each output type. Those are described in more detail
-below.
-
-Like with video capture the framerate is also exact in the long term.
-
-
-S-Video Output
-~~~~~~~~~~~~~~
-
-This output supports audio outputs as well: "Line-Out 1" and "Line-Out 2".
-The S-Video output supports all TV standards.
-
-This output supports all combinations of the field setting.
-
-The initially selected colorspace when you switch to the TV or S-Video input
-will be SMPTE-170M.
-
-
-HDMI Output
-~~~~~~~~~~~
-
-The HDMI output supports all CEA-861 and DMT timings, both progressive and
-interlaced, for pixelclock frequencies between 25 and 600 MHz. The field
-mode for interlaced formats is always V4L2_FIELD_ALTERNATE.
-
-The initially selected colorspace when you switch to the HDMI output or
-select an HDMI timing is based on the format resolution: for resolutions
-less than or equal to 720x576 the colorspace is set to SMPTE-170M, for
-others it is set to REC-709 (CEA-861 timings) or sRGB (VESA DMT timings).
-
-The pixel aspect ratio will depend on the HDMI timing: for 720x480 is it
-set as for the NTSC TV standard, for 720x576 it is set as for the PAL TV
-standard, and for all others a 1:1 pixel aspect ratio is returned.
-
-An HDMI output has a valid EDID which can be obtained through VIDIOC_G_EDID.
-
-There is a maximum of 15 HDMI outputs (if there are more, then they will be
-reduced to 15) since that's the limitation of the EDID physical address. See
-also the CEC section for more details.
-
-VBI Capture
------------
-
-There are three types of VBI capture devices: those that only support raw
-(undecoded) VBI, those that only support sliced (decoded) VBI and those that
-support both. This is determined by the node_types module option. In all
-cases the driver will generate valid VBI data: for 60 Hz standards it will
-generate Closed Caption and XDS data. The closed caption stream will
-alternate between "Hello world!" and "Closed captions test" every second.
-The XDS stream will give the current time once a minute. For 50 Hz standards
-it will generate the Wide Screen Signal which is based on the actual Video
-Aspect Ratio control setting and teletext pages 100-159, one page per frame.
-
-The VBI device will only work for the S-Video and TV inputs, it will give
-back an error if the current input is a webcam or HDMI.
-
-
-VBI Output
-----------
-
-There are three types of VBI output devices: those that only support raw
-(undecoded) VBI, those that only support sliced (decoded) VBI and those that
-support both. This is determined by the node_types module option.
-
-The sliced VBI output supports the Wide Screen Signal and the teletext signal
-for 50 Hz standards and Closed Captioning + XDS for 60 Hz standards.
-
-The VBI device will only work for the S-Video output, it will give
-back an error if the current output is HDMI.
-
-
-Radio Receiver
---------------
-
-The radio receiver emulates an FM/AM/SW receiver. The FM band also supports RDS.
-The frequency ranges are:
-
-	- FM: 64 MHz - 108 MHz
-	- AM: 520 kHz - 1710 kHz
-	- SW: 2300 kHz - 26.1 MHz
-
-Valid channels are emulated every 1 MHz for FM and every 100 kHz for AM and SW.
-The signal strength decreases the further the frequency is from the valid
-frequency until it becomes 0% at +/- 50 kHz (FM) or 5 kHz (AM/SW) from the
-ideal frequency. The initial frequency when the driver is loaded is set to
-95 MHz.
-
-The FM receiver supports RDS as well, both using 'Block I/O' and 'Controls'
-modes. In the 'Controls' mode the RDS information is stored in read-only
-controls. These controls are updated every time the frequency is changed,
-or when the tuner status is requested. The Block I/O method uses the read()
-interface to pass the RDS blocks on to the application for decoding.
-
-The RDS signal is 'detected' for +/- 12.5 kHz around the channel frequency,
-and the further the frequency is away from the valid frequency the more RDS
-errors are randomly introduced into the block I/O stream, up to 50% of all
-blocks if you are +/- 12.5 kHz from the channel frequency. All four errors
-can occur in equal proportions: blocks marked 'CORRECTED', blocks marked
-'ERROR', blocks marked 'INVALID' and dropped blocks.
-
-The generated RDS stream contains all the standard fields contained in a
-0B group, and also radio text and the current time.
-
-The receiver supports HW frequency seek, either in Bounded mode, Wrap Around
-mode or both, which is configurable with the "Radio HW Seek Mode" control.
-
-
-Radio Transmitter
------------------
-
-The radio transmitter emulates an FM/AM/SW transmitter. The FM band also supports RDS.
-The frequency ranges are:
-
-	- FM: 64 MHz - 108 MHz
-	- AM: 520 kHz - 1710 kHz
-	- SW: 2300 kHz - 26.1 MHz
-
-The initial frequency when the driver is loaded is 95.5 MHz.
-
-The FM transmitter supports RDS as well, both using 'Block I/O' and 'Controls'
-modes. In the 'Controls' mode the transmitted RDS information is configured
-using controls, and in 'Block I/O' mode the blocks are passed to the driver
-using write().
-
-
-Software Defined Radio Receiver
--------------------------------
-
-The SDR receiver has three frequency bands for the ADC tuner:
-
-	- 300 kHz
-	- 900 kHz - 2800 kHz
-	- 3200 kHz
-
-The RF tuner supports 50 MHz - 2000 MHz.
-
-The generated data contains the In-phase and Quadrature components of a
-1 kHz tone that has an amplitude of sqrt(2).
-
-
-Metadata Capture
-----------------
-
-The Metadata capture generates UVC format metadata. The PTS and SCR are
-transmitted based on the values set in vivid contols.
-
-The Metadata device will only work for the Webcam input, it will give
-back an error for all other inputs.
-
-
-Metadata Output
----------------
-
-The Metadata output can be used to set brightness, contrast, saturation and hue.
-
-The Metadata device will only work for the Webcam output, it will give
-back an error for all other outputs.
-
-
-Touch Capture
--------------
-
-The Touch capture generates touch patterns simulating single tap, double tap,
-triple tap, move from left to right, zoom in, zoom out, palm press (simulating
-a large area being pressed on a touchpad), and simulating 16 simultaneous
-touch points.
-
-Controls
---------
-
-Different devices support different controls. The sections below will describe
-each control and which devices support them.
-
-
-User Controls - Test Controls
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The Button, Boolean, Integer 32 Bits, Integer 64 Bits, Menu, String, Bitmask and
-Integer Menu are controls that represent all possible control types. The Menu
-control and the Integer Menu control both have 'holes' in their menu list,
-meaning that one or more menu items return EINVAL when VIDIOC_QUERYMENU is called.
-Both menu controls also have a non-zero minimum control value.  These features
-allow you to check if your application can handle such things correctly.
-These controls are supported for every device type.
-
-
-User Controls - Video Capture
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The following controls are specific to video capture.
-
-The Brightness, Contrast, Saturation and Hue controls actually work and are
-standard. There is one special feature with the Brightness control: each
-video input has its own brightness value, so changing input will restore
-the brightness for that input. In addition, each video input uses a different
-brightness range (minimum and maximum control values). Switching inputs will
-cause a control event to be sent with the V4L2_EVENT_CTRL_CH_RANGE flag set.
-This allows you to test controls that can change their range.
-
-The 'Gain, Automatic' and Gain controls can be used to test volatile controls:
-if 'Gain, Automatic' is set, then the Gain control is volatile and changes
-constantly. If 'Gain, Automatic' is cleared, then the Gain control is a normal
-control.
-
-The 'Horizontal Flip' and 'Vertical Flip' controls can be used to flip the
-image. These combine with the 'Sensor Flipped Horizontally/Vertically' Vivid
-controls.
-
-The 'Alpha Component' control can be used to set the alpha component for
-formats containing an alpha channel.
-
-
-User Controls - Audio
-~~~~~~~~~~~~~~~~~~~~~
-
-The following controls are specific to video capture and output and radio
-receivers and transmitters.
-
-The 'Volume' and 'Mute' audio controls are typical for such devices to
-control the volume and mute the audio. They don't actually do anything in
-the vivid driver.
-
-
-Vivid Controls
-~~~~~~~~~~~~~~
-
-These vivid custom controls control the image generation, error injection, etc.
-
-
-Test Pattern Controls
-^^^^^^^^^^^^^^^^^^^^^
-
-The Test Pattern Controls are all specific to video capture.
-
-- Test Pattern:
-
-	selects which test pattern to use. Use the CSC Colorbar for
-	testing colorspace conversions: the colors used in that test pattern
-	map to valid colors in all colorspaces. The colorspace conversion
-	is disabled for the other test patterns.
-
-- OSD Text Mode:
-
-	selects whether the text superimposed on the
-	test pattern should be shown, and if so, whether only counters should
-	be displayed or the full text.
-
-- Horizontal Movement:
-
-	selects whether the test pattern should
-	move to the left or right and at what speed.
-
-- Vertical Movement:
-
-	does the same for the vertical direction.
-
-- Show Border:
-
-	show a two-pixel wide border at the edge of the actual image,
-	excluding letter or pillarboxing.
-
-- Show Square:
-
-	show a square in the middle of the image. If the image is
-	displayed with the correct pixel and image aspect ratio corrections,
-	then the width and height of the square on the monitor should be
-	the same.
-
-- Insert SAV Code in Image:
-
-	adds a SAV (Start of Active Video) code to the image.
-	This can be used to check if such codes in the image are inadvertently
-	interpreted instead of being ignored.
-
-- Insert EAV Code in Image:
-
-	does the same for the EAV (End of Active Video) code.
-
-
-Capture Feature Selection Controls
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-These controls are all specific to video capture.
-
-- Sensor Flipped Horizontally:
-
-	the image is flipped horizontally and the
-	V4L2_IN_ST_HFLIP input status flag is set. This emulates the case where
-	a sensor is for example mounted upside down.
-
-- Sensor Flipped Vertically:
-
-	the image is flipped vertically and the
-	V4L2_IN_ST_VFLIP input status flag is set. This emulates the case where
-	a sensor is for example mounted upside down.
-
-- Standard Aspect Ratio:
-
-	selects if the image aspect ratio as used for the TV or
-	S-Video input should be 4x3, 16x9 or anamorphic widescreen. This may
-	introduce letterboxing.
-
-- DV Timings Aspect Ratio:
-
-	selects if the image aspect ratio as used for the HDMI
-	input should be the same as the source width and height ratio, or if
-	it should be 4x3 or 16x9. This may introduce letter or pillarboxing.
-
-- Timestamp Source:
-
-	selects when the timestamp for each buffer is taken.
-
-- Colorspace:
-
-	selects which colorspace should be used when generating the image.
-	This only applies if the CSC Colorbar test pattern is selected,
-	otherwise the test pattern will go through unconverted.
-	This behavior is also what you want, since a 75% Colorbar
-	should really have 75% signal intensity and should not be affected
-	by colorspace conversions.
-
-	Changing the colorspace will result in the V4L2_EVENT_SOURCE_CHANGE
-	to be sent since it emulates a detected colorspace change.
-
-- Transfer Function:
-
-	selects which colorspace transfer function should be used when
-	generating an image. This only applies if the CSC Colorbar test pattern is
-	selected, otherwise the test pattern will go through unconverted.
-	This behavior is also what you want, since a 75% Colorbar
-	should really have 75% signal intensity and should not be affected
-	by colorspace conversions.
-
-	Changing the transfer function will result in the V4L2_EVENT_SOURCE_CHANGE
-	to be sent since it emulates a detected colorspace change.
-
-- Y'CbCr Encoding:
-
-	selects which Y'CbCr encoding should be used when generating
-	a Y'CbCr image.	This only applies if the format is set to a Y'CbCr format
-	as opposed to an RGB format.
-
-	Changing the Y'CbCr encoding will result in the V4L2_EVENT_SOURCE_CHANGE
-	to be sent since it emulates a detected colorspace change.
-
-- Quantization:
-
-	selects which quantization should be used for the RGB or Y'CbCr
-	encoding when generating the test pattern.
-
-	Changing the quantization will result in the V4L2_EVENT_SOURCE_CHANGE
-	to be sent since it emulates a detected colorspace change.
-
-- Limited RGB Range (16-235):
-
-	selects if the RGB range of the HDMI source should
-	be limited or full range. This combines with the Digital Video 'Rx RGB
-	Quantization Range' control and can be used to test what happens if
-	a source provides you with the wrong quantization range information.
-	See the description of that control for more details.
-
-- Apply Alpha To Red Only:
-
-	apply the alpha channel as set by the 'Alpha Component'
-	user control to the red color of the test pattern only.
-
-- Enable Capture Cropping:
-
-	enables crop support. This control is only present if
-	the ccs_cap_mode module option is set to the default value of -1 and if
-	the no_error_inj module option is set to 0 (the default).
-
-- Enable Capture Composing:
-
-	enables composing support. This control is only
-	present if the ccs_cap_mode module option is set to the default value of
-	-1 and if the no_error_inj module option is set to 0 (the default).
-
-- Enable Capture Scaler:
-
-	enables support for a scaler (maximum 4 times upscaling
-	and downscaling). This control is only present if the ccs_cap_mode
-	module option is set to the default value of -1 and if the no_error_inj
-	module option is set to 0 (the default).
-
-- Maximum EDID Blocks:
-
-	determines how many EDID blocks the driver supports.
-	Note that the vivid driver does not actually interpret new EDID
-	data, it just stores it. It allows for up to 256 EDID blocks
-	which is the maximum supported by the standard.
-
-- Fill Percentage of Frame:
-
-	can be used to draw only the top X percent
-	of the image. Since each frame has to be drawn by the driver, this
-	demands a lot of the CPU. For large resolutions this becomes
-	problematic. By drawing only part of the image this CPU load can
-	be reduced.
-
-
-Output Feature Selection Controls
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-These controls are all specific to video output.
-
-- Enable Output Cropping:
-
-	enables crop support. This control is only present if
-	the ccs_out_mode module option is set to the default value of -1 and if
-	the no_error_inj module option is set to 0 (the default).
-
-- Enable Output Composing:
-
-	enables composing support. This control is only
-	present if the ccs_out_mode module option is set to the default value of
-	-1 and if the no_error_inj module option is set to 0 (the default).
-
-- Enable Output Scaler:
-
-	enables support for a scaler (maximum 4 times upscaling
-	and downscaling). This control is only present if the ccs_out_mode
-	module option is set to the default value of -1 and if the no_error_inj
-	module option is set to 0 (the default).
-
-
-Error Injection Controls
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-The following two controls are only valid for video and vbi capture.
-
-- Standard Signal Mode:
-
-	selects the behavior of VIDIOC_QUERYSTD: what should it return?
-
-	Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE
-	to be sent since it emulates a changed input condition (e.g. a cable
-	was plugged in or out).
-
-- Standard:
-
-	selects the standard that VIDIOC_QUERYSTD should return if the
-	previous control is set to "Selected Standard".
-
-	Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE
-	to be sent since it emulates a changed input standard.
-
-
-The following two controls are only valid for video capture.
-
-- DV Timings Signal Mode:
-
-	selects the behavior of VIDIOC_QUERY_DV_TIMINGS: what
-	should it return?
-
-	Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE
-	to be sent since it emulates a changed input condition (e.g. a cable
-	was plugged in or out).
-
-- DV Timings:
-
-	selects the timings the VIDIOC_QUERY_DV_TIMINGS should return
-	if the previous control is set to "Selected DV Timings".
-
-	Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE
-	to be sent since it emulates changed input timings.
-
-
-The following controls are only present if the no_error_inj module option
-is set to 0 (the default). These controls are valid for video and vbi
-capture and output streams and for the SDR capture device except for the
-Disconnect control which is valid for all devices.
-
-- Wrap Sequence Number:
-
-	test what happens when you wrap the sequence number in
-	struct v4l2_buffer around.
-
-- Wrap Timestamp:
-
-	test what happens when you wrap the timestamp in struct
-	v4l2_buffer around.
-
-- Percentage of Dropped Buffers:
-
-	sets the percentage of buffers that
-	are never returned by the driver (i.e., they are dropped).
-
-- Disconnect:
-
-	emulates a USB disconnect. The device will act as if it has
-	been disconnected. Only after all open filehandles to the device
-	node have been closed will the device become 'connected' again.
-
-- Inject V4L2_BUF_FLAG_ERROR:
-
-	when pressed, the next frame returned by
-	the driver will have the error flag set (i.e. the frame is marked
-	corrupt).
-
-- Inject VIDIOC_REQBUFS Error:
-
-	when pressed, the next REQBUFS or CREATE_BUFS
-	ioctl call will fail with an error. To be precise: the videobuf2
-	queue_setup() op will return -EINVAL.
-
-- Inject VIDIOC_QBUF Error:
-
-	when pressed, the next VIDIOC_QBUF or
-	VIDIOC_PREPARE_BUFFER ioctl call will fail with an error. To be
-	precise: the videobuf2 buf_prepare() op will return -EINVAL.
-
-- Inject VIDIOC_STREAMON Error:
-
-	when pressed, the next VIDIOC_STREAMON ioctl
-	call will fail with an error. To be precise: the videobuf2
-	start_streaming() op will return -EINVAL.
-
-- Inject Fatal Streaming Error:
-
-	when pressed, the streaming core will be
-	marked as having suffered a fatal error, the only way to recover
-	from that is to stop streaming. To be precise: the videobuf2
-	vb2_queue_error() function is called.
-
-
-VBI Raw Capture Controls
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-- Interlaced VBI Format:
-
-	if set, then the raw VBI data will be interlaced instead
-	of providing it grouped by field.
-
-
-Digital Video Controls
-~~~~~~~~~~~~~~~~~~~~~~
-
-- Rx RGB Quantization Range:
-
-	sets the RGB quantization detection of the HDMI
-	input. This combines with the Vivid 'Limited RGB Range (16-235)'
-	control and can be used to test what happens if a source provides
-	you with the wrong quantization range information. This can be tested
-	by selecting an HDMI input, setting this control to Full or Limited
-	range and selecting the opposite in the 'Limited RGB Range (16-235)'
-	control. The effect is easy to see if the 'Gray Ramp' test pattern
-	is selected.
-
-- Tx RGB Quantization Range:
-
-	sets the RGB quantization detection of the HDMI
-	output. It is currently not used for anything in vivid, but most HDMI
-	transmitters would typically have this control.
-
-- Transmit Mode:
-
-	sets the transmit mode of the HDMI output to HDMI or DVI-D. This
-	affects the reported colorspace since DVI_D outputs will always use
-	sRGB.
-
-- Display Present:
-
-	sets the presence of a "display" on the HDMI output. This affects
-	the tx_edid_present, tx_hotplug and tx_rxsense controls.
-
-
-FM Radio Receiver Controls
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- RDS Reception:
-
-	set if the RDS receiver should be enabled.
-
-- RDS Program Type:
-
-
-- RDS PS Name:
-
-
-- RDS Radio Text:
-
-
-- RDS Traffic Announcement:
-
-
-- RDS Traffic Program:
-
-
-- RDS Music:
-
-	these are all read-only controls. If RDS Rx I/O Mode is set to
-	"Block I/O", then they are inactive as well. If RDS Rx I/O Mode is set
-	to "Controls", then these controls report the received RDS data.
-
-.. note::
-	The vivid implementation of this is pretty basic: they are only
-	updated when you set a new frequency or when you get the tuner status
-	(VIDIOC_G_TUNER).
-
-- Radio HW Seek Mode:
-
-	can be one of "Bounded", "Wrap Around" or "Both". This
-	determines if VIDIOC_S_HW_FREQ_SEEK will be bounded by the frequency
-	range or wrap-around or if it is selectable by the user.
-
-- Radio Programmable HW Seek:
-
-	if set, then the user can provide the lower and
-	upper bound of the HW Seek. Otherwise the frequency range boundaries
-	will be used.
-
-- Generate RBDS Instead of RDS:
-
-	if set, then generate RBDS (the US variant of
-	RDS) data instead of RDS (European-style RDS). This affects only the
-	PICODE and PTY codes.
-
-- RDS Rx I/O Mode:
-
-	this can be "Block I/O" where the RDS blocks have to be read()
-	by the application, or "Controls" where the RDS data is provided by
-	the RDS controls mentioned above.
-
-
-FM Radio Modulator Controls
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- RDS Program ID:
-
-
-- RDS Program Type:
-
-
-- RDS PS Name:
-
-
-- RDS Radio Text:
-
-
-- RDS Stereo:
-
-
-- RDS Artificial Head:
-
-
-- RDS Compressed:
-
-
-- RDS Dynamic PTY:
-
-
-- RDS Traffic Announcement:
-
-
-- RDS Traffic Program:
-
-
-- RDS Music:
-
-	these are all controls that set the RDS data that is transmitted by
-	the FM modulator.
-
-- RDS Tx I/O Mode:
-
-	this can be "Block I/O" where the application has to use write()
-	to pass the RDS blocks to the driver, or "Controls" where the RDS data
-	is Provided by the RDS controls mentioned above.
-
-Metadata Capture Controls
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- Generate PTS
-
-        if set, then the generated metadata stream contains Presentation timestamp.
-
-- Generate SCR
-
-        if set, then the generated metadata stream contains Source Clock information.
-
-Video, VBI and RDS Looping
---------------------------
-
-The vivid driver supports looping of video output to video input, VBI output
-to VBI input and RDS output to RDS input. For video/VBI looping this emulates
-as if a cable was hooked up between the output and input connector. So video
-and VBI looping is only supported between S-Video and HDMI inputs and outputs.
-VBI is only valid for S-Video as it makes no sense for HDMI.
-
-Since radio is wireless this looping always happens if the radio receiver
-frequency is close to the radio transmitter frequency. In that case the radio
-transmitter will 'override' the emulated radio stations.
-
-Looping is currently supported only between devices created by the same
-vivid driver instance.
-
-
-Video and Sliced VBI looping
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The way to enable video/VBI looping is currently fairly crude. A 'Loop Video'
-control is available in the "Vivid" control class of the video
-capture and VBI capture devices. When checked the video looping will be enabled.
-Once enabled any video S-Video or HDMI input will show a static test pattern
-until the video output has started. At that time the video output will be
-looped to the video input provided that:
-
-- the input type matches the output type. So the HDMI input cannot receive
-  video from the S-Video output.
-
-- the video resolution of the video input must match that of the video output.
-  So it is not possible to loop a 50 Hz (720x576) S-Video output to a 60 Hz
-  (720x480) S-Video input, or a 720p60 HDMI output to a 1080p30 input.
-
-- the pixel formats must be identical on both sides. Otherwise the driver would
-  have to do pixel format conversion as well, and that's taking things too far.
-
-- the field settings must be identical on both sides. Same reason as above:
-  requiring the driver to convert from one field format to another complicated
-  matters too much. This also prohibits capturing with 'Field Top' or 'Field
-  Bottom' when the output video is set to 'Field Alternate'. This combination,
-  while legal, became too complicated to support. Both sides have to be 'Field
-  Alternate' for this to work. Also note that for this specific case the
-  sequence and field counting in struct v4l2_buffer on the capture side may not
-  be 100% accurate.
-
-- field settings V4L2_FIELD_SEQ_TB/BT are not supported. While it is possible to
-  implement this, it would mean a lot of work to get this right. Since these
-  field values are rarely used the decision was made not to implement this for
-  now.
-
-- on the input side the "Standard Signal Mode" for the S-Video input or the
-  "DV Timings Signal Mode" for the HDMI input should be configured so that a
-  valid signal is passed to the video input.
-
-The framerates do not have to match, although this might change in the future.
-
-By default you will see the OSD text superimposed on top of the looped video.
-This can be turned off by changing the "OSD Text Mode" control of the video
-capture device.
-
-For VBI looping to work all of the above must be valid and in addition the vbi
-output must be configured for sliced VBI. The VBI capture side can be configured
-for either raw or sliced VBI. Note that at the moment only CC/XDS (60 Hz formats)
-and WSS (50 Hz formats) VBI data is looped. Teletext VBI data is not looped.
-
-
-Radio & RDS Looping
-~~~~~~~~~~~~~~~~~~~
-
-As mentioned in section 6 the radio receiver emulates stations are regular
-frequency intervals. Depending on the frequency of the radio receiver a
-signal strength value is calculated (this is returned by VIDIOC_G_TUNER).
-However, it will also look at the frequency set by the radio transmitter and
-if that results in a higher signal strength than the settings of the radio
-transmitter will be used as if it was a valid station. This also includes
-the RDS data (if any) that the transmitter 'transmits'. This is received
-faithfully on the receiver side. Note that when the driver is loaded the
-frequencies of the radio receiver and transmitter are not identical, so
-initially no looping takes place.
-
-
-Cropping, Composing, Scaling
-----------------------------
-
-This driver supports cropping, composing and scaling in any combination. Normally
-which features are supported can be selected through the Vivid controls,
-but it is also possible to hardcode it when the module is loaded through the
-ccs_cap_mode and ccs_out_mode module options. See section 1 on the details of
-these module options.
-
-This allows you to test your application for all these variations.
-
-Note that the webcam input never supports cropping, composing or scaling. That
-only applies to the TV/S-Video/HDMI inputs and outputs. The reason is that
-webcams, including this virtual implementation, normally use
-VIDIOC_ENUM_FRAMESIZES to list a set of discrete framesizes that it supports.
-And that does not combine with cropping, composing or scaling. This is
-primarily a limitation of the V4L2 API which is carefully reproduced here.
-
-The minimum and maximum resolutions that the scaler can achieve are 16x16 and
-(4096 * 4) x (2160 x 4), but it can only scale up or down by a factor of 4 or
-less. So for a source resolution of 1280x720 the minimum the scaler can do is
-320x180 and the maximum is 5120x2880. You can play around with this using the
-qv4l2 test tool and you will see these dependencies.
-
-This driver also supports larger 'bytesperline' settings, something that
-VIDIOC_S_FMT allows but that few drivers implement.
-
-The scaler is a simple scaler that uses the Coarse Bresenham algorithm. It's
-designed for speed and simplicity, not quality.
-
-If the combination of crop, compose and scaling allows it, then it is possible
-to change crop and compose rectangles on the fly.
-
-
-Formats
--------
-
-The driver supports all the regular packed and planar 4:4:4, 4:2:2 and 4:2:0
-YUYV formats, 8, 16, 24 and 32 RGB packed formats and various multiplanar
-formats.
-
-The alpha component can be set through the 'Alpha Component' User control
-for those formats that support it. If the 'Apply Alpha To Red Only' control
-is set, then the alpha component is only used for the color red and set to
-0 otherwise.
-
-The driver has to be configured to support the multiplanar formats. By default
-the driver instances are single-planar. This can be changed by setting the
-multiplanar module option, see section 1 for more details on that option.
-
-If the driver instance is using the multiplanar formats/API, then the first
-single planar format (YUYV) and the multiplanar NV16M and NV61M formats the
-will have a plane that has a non-zero data_offset of 128 bytes. It is rare for
-data_offset to be non-zero, so this is a useful feature for testing applications.
-
-Video output will also honor any data_offset that the application set.
-
-
-Capture Overlay
----------------
-
-Note: capture overlay support is implemented primarily to test the existing
-V4L2 capture overlay API. In practice few if any GPUs support such overlays
-anymore, and neither are they generally needed anymore since modern hardware
-is so much more capable. By setting flag 0x10000 in the node_types module
-option the vivid driver will create a simple framebuffer device that can be
-used for testing this API. Whether this API should be used for new drivers is
-questionable.
-
-This driver has support for a destructive capture overlay with bitmap clipping
-and list clipping (up to 16 rectangles) capabilities. Overlays are not
-supported for multiplanar formats. It also honors the struct v4l2_window field
-setting: if it is set to FIELD_TOP or FIELD_BOTTOM and the capture setting is
-FIELD_ALTERNATE, then only the top or bottom fields will be copied to the overlay.
-
-The overlay only works if you are also capturing at that same time. This is a
-vivid limitation since it copies from a buffer to the overlay instead of
-filling the overlay directly. And if you are not capturing, then no buffers
-are available to fill.
-
-In addition, the pixelformat of the capture format and that of the framebuffer
-must be the same for the overlay to work. Otherwise VIDIOC_OVERLAY will return
-an error.
-
-In order to really see what it going on you will need to create two vivid
-instances: the first with a framebuffer enabled. You configure the capture
-overlay of the second instance to use the framebuffer of the first, then
-you start capturing in the second instance. For the first instance you setup
-the output overlay for the video output, turn on video looping and capture
-to see the blended framebuffer overlay that's being written to by the second
-instance. This setup would require the following commands:
-
-.. code-block:: none
-
-	$ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
-	$ v4l2-ctl -d1 --find-fb
-	/dev/fb1 is the framebuffer associated with base address 0x12800000
-	$ sudo v4l2-ctl -d2 --set-fbuf fb=1
-	$ v4l2-ctl -d1 --set-fbuf fb=1
-	$ v4l2-ctl -d0 --set-fmt-video=pixelformat='AR15'
-	$ v4l2-ctl -d1 --set-fmt-video-out=pixelformat='AR15'
-	$ v4l2-ctl -d2 --set-fmt-video=pixelformat='AR15'
-	$ v4l2-ctl -d0 -i2
-	$ v4l2-ctl -d2 -i2
-	$ v4l2-ctl -d2 -c horizontal_movement=4
-	$ v4l2-ctl -d1 --overlay=1
-	$ v4l2-ctl -d1 -c loop_video=1
-	$ v4l2-ctl -d2 --stream-mmap --overlay=1
-
-And from another console:
-
-.. code-block:: none
-
-	$ v4l2-ctl -d1 --stream-out-mmap
-
-And yet another console:
-
-.. code-block:: none
-
-	$ qv4l2
-
-and start streaming.
-
-As you can see, this is not for the faint of heart...
-
-
-Output Overlay
---------------
-
-Note: output overlays are primarily implemented in order to test the existing
-V4L2 output overlay API. Whether this API should be used for new drivers is
-questionable.
-
-This driver has support for an output overlay and is capable of:
-
-	- bitmap clipping,
-	- list clipping (up to 16 rectangles)
-	- chromakey
-	- source chromakey
-	- global alpha
-	- local alpha
-	- local inverse alpha
-
-Output overlays are not supported for multiplanar formats. In addition, the
-pixelformat of the capture format and that of the framebuffer must be the
-same for the overlay to work. Otherwise VIDIOC_OVERLAY will return an error.
-
-Output overlays only work if the driver has been configured to create a
-framebuffer by setting flag 0x10000 in the node_types module option. The
-created framebuffer has a size of 720x576 and supports ARGB 1:5:5:5 and
-RGB 5:6:5.
-
-In order to see the effects of the various clipping, chromakeying or alpha
-processing capabilities you need to turn on video looping and see the results
-on the capture side. The use of the clipping, chromakeying or alpha processing
-capabilities will slow down the video loop considerably as a lot of checks have
-to be done per pixel.
-
-
-CEC (Consumer Electronics Control)
-----------------------------------
-
-If there are HDMI inputs then a CEC adapter will be created that has
-the same number of input ports. This is the equivalent of e.g. a TV that
-has that number of inputs. Each HDMI output will also create a
-CEC adapter that is hooked up to the corresponding input port, or (if there
-are more outputs than inputs) is not hooked up at all. In other words,
-this is the equivalent of hooking up each output device to an input port of
-the TV. Any remaining output devices remain unconnected.
-
-The EDID that each output reads reports a unique CEC physical address that is
-based on the physical address of the EDID of the input. So if the EDID of the
-receiver has physical address A.B.0.0, then each output will see an EDID
-containing physical address A.B.C.0 where C is 1 to the number of inputs. If
-there are more outputs than inputs then the remaining outputs have a CEC adapter
-that is disabled and reports an invalid physical address.
-
-
-Some Future Improvements
-------------------------
-
-Just as a reminder and in no particular order:
-
-- Add a virtual alsa driver to test audio
-- Add virtual sub-devices and media controller support
-- Some support for testing compressed video
-- Add support to loop raw VBI output to raw VBI input
-- Add support to loop teletext sliced VBI output to VBI input
-- Fix sequence/field numbering when looping of video with alternate fields
-- Add support for V4L2_CID_BG_COLOR for video outputs
-- Add ARGB888 overlay support: better testing of the alpha channel
-- Improve pixel aspect support in the tpg code by passing a real v4l2_fract
-- Use per-queue locks and/or per-device locks to improve throughput
-- Add support to loop from a specific output to a specific input across
-  vivid instances
-- The SDR radio should use the same 'frequencies' for stations as the normal
-  radio receiver, and give back noise if the frequency doesn't match up with
-  a station frequency
-- Make a thread for the RDS generation, that would help in particular for the
-  "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated
-  in real-time.
-- Changing the EDID should cause hotplug detect emulation to happen.
diff --git a/Documentation/media/v4l-drivers/zr364xx.rst b/Documentation/media/v4l-drivers/zr364xx.rst
deleted file mode 100644
index ec8acb3e98fc..000000000000
--- a/Documentation/media/v4l-drivers/zr364xx.rst
+++ /dev/null
@@ -1,110 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Zoran 364xx based USB webcam module
-===================================
-
-site: http://royale.zerezo.com/zr364xx/
-
-mail: royale@zerezo.com
-
-.. note::
-
-   This documentation is outdated
-
-Introduction
-------------
-
-
-This brings support under Linux for the Aiptek PocketDV 3300 in webcam
-mode. If you just want to get on your PC the pictures and movies on the
-camera, you should use the usb-storage module instead.
-
-The driver works with several other cameras in webcam mode (see the list
-below).
-
-Maybe this code can work for other JPEG/USB cams based on the Coach
-chips from Zoran?
-
-Possible chipsets are : ZR36430 (ZR36430BGC) and
-maybe ZR36431, ZR36440, ZR36442...
-
-You can try the experience changing the vendor/product ID values (look
-at the source code).
-
-You can get these values by looking at /var/log/messages when you plug
-your camera, or by typing : cat /sys/kernel/debug/usb/devices.
-
-If you manage to use your cam with this code, you can send me a mail
-(royale@zerezo.com) with the name of your cam and a patch if needed.
-
-This is a beta release of the driver. Since version 0.70, this driver is
-only compatible with V4L2 API and 2.6.x kernels. If you need V4L1 or
-2.4x kernels support, please use an older version, but the code is not
-maintained anymore. Good luck!
-
-Install
--------
-
-In order to use this driver, you must compile it with your kernel.
-
-Location: Device Drivers -> Multimedia devices -> Video For Linux -> Video Capture Adapters -> V4L USB devices
-
-Usage
------
-
-modprobe zr364xx debug=X mode=Y
-
-- debug      : set to 1 to enable verbose debug messages
-- mode       : 0 = 320x240, 1 = 160x120, 2 = 640x480
-
-You can then use the camera with V4L2 compatible applications, for
-example Ekiga.
-
-To capture a single image, try this: dd if=/dev/video0 of=test.jpg bs=1M
-count=1
-
-links
------
-
-http://mxhaard.free.fr/ (support for many others cams including some Aiptek PocketDV)
-http://www.harmwal.nl/pccam880/ (this project also supports cameras based on this chipset)
-
-Supported devices
------------------
-
-======  =======  ==============  ====================
-Vendor  Product  Distributor     Model
-======  =======  ==============  ====================
-0x08ca  0x0109   Aiptek          PocketDV 3300
-0x08ca  0x0109   Maxell          Maxcam PRO DV3
-0x041e  0x4024   Creative        PC-CAM 880
-0x0d64  0x0108   Aiptek          Fidelity 3200
-0x0d64  0x0108   Praktica        DCZ 1.3 S
-0x0d64  0x0108   Genius          Digital Camera (?)
-0x0d64  0x0108   DXG Technology  Fashion Cam
-0x0546  0x3187   Polaroid        iON 230
-0x0d64  0x3108   Praktica        Exakta DC 2200
-0x0d64  0x3108   Genius          G-Shot D211
-0x0595  0x4343   Concord         Eye-Q Duo 1300
-0x0595  0x4343   Concord         Eye-Q Duo 2000
-0x0595  0x4343   Fujifilm        EX-10
-0x0595  0x4343   Ricoh           RDC-6000
-0x0595  0x4343   Digitrex        DSC 1300
-0x0595  0x4343   Firstline       FDC 2000
-0x0bb0  0x500d   Concord         EyeQ Go Wireless
-0x0feb  0x2004   CRS Electronic  3.3 Digital Camera
-0x0feb  0x2004   Packard Bell    DSC-300
-0x055f  0xb500   Mustek          MDC 3000
-0x08ca  0x2062   Aiptek          PocketDV 5700
-0x052b  0x1a18   Chiphead        Megapix V12
-0x04c8  0x0729   Konica          Revio 2
-0x04f2  0xa208   Creative        PC-CAM 850
-0x0784  0x0040   Traveler        Slimline X5
-0x06d6  0x0034   Trust           Powerc@m 750
-0x0a17  0x0062   Pentax          Optio 50L
-0x06d6  0x003b   Trust           Powerc@m 970Z
-0x0a17  0x004e   Pentax          Optio 50
-0x041e  0x405d   Creative        DiVi CAM 516
-0x08ca  0x2102   Aiptek          DV T300
-0x06d6  0x003d   Trust           Powerc@m 910Z
-======  =======  ==============  ====================
diff --git a/Documentation/media/video.h.rst.exceptions b/Documentation/media/video.h.rst.exceptions
deleted file mode 100644
index ea9de59ad8b7..000000000000
--- a/Documentation/media/video.h.rst.exceptions
+++ /dev/null
@@ -1,39 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define _UAPI_DVBVIDEO_H_
-
-# This is a deprecated obscure API. Just ignore things we don't know
-ignore define VIDEO_CMD_PLAY
-ignore define VIDEO_CMD_STOP
-ignore define VIDEO_CMD_FREEZE
-ignore define VIDEO_CMD_CONTINUE
-ignore define VIDEO_CMD_FREEZE_TO_BLACK
-ignore define VIDEO_CMD_STOP_TO_BLACK
-ignore define VIDEO_CMD_STOP_IMMEDIATELY
-ignore define VIDEO_PLAY_FMT_NONE
-ignore define VIDEO_PLAY_FMT_GOP
-ignore define VIDEO_VSYNC_FIELD_UNKNOWN
-ignore define VIDEO_VSYNC_FIELD_ODD
-ignore define VIDEO_VSYNC_FIELD_EVEN
-ignore define VIDEO_VSYNC_FIELD_PROGRESSIVE
-ignore define VIDEO_EVENT_SIZE_CHANGED
-ignore define VIDEO_EVENT_FRAME_RATE_CHANGED
-ignore define VIDEO_EVENT_DECODER_STOPPED
-ignore define VIDEO_EVENT_VSYNC
-ignore define VIDEO_CAP_MPEG1
-ignore define VIDEO_CAP_MPEG2
-ignore define VIDEO_CAP_SYS
-ignore define VIDEO_CAP_PROG
-ignore define VIDEO_CAP_SPU
-ignore define VIDEO_CAP_NAVI
-ignore define VIDEO_CAP_CSS
-
-# some typedefs should point to struct/enums
-replace typedef video_format_t :c:type:`video_format`
-replace typedef video_system_t :c:type:`video_system`
-replace typedef video_displayformat_t :c:type:`video_displayformat`
-replace typedef video_size_t :c:type:`video_size`
-replace typedef video_stream_source_t :c:type:`video_stream_source`
-replace typedef video_play_state_t :c:type:`video_play_state`
-replace typedef video_navi_pack_t :c:type:`video_navi_pack`
diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions
deleted file mode 100644
index cb6ccf91776e..000000000000
--- a/Documentation/media/videodev2.h.rst.exceptions
+++ /dev/null
@@ -1,572 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# Ignore header name
-ignore define _UAPI__LINUX_VIDEODEV2_H
-
-#
-# The cross reference valitator for videodev2.h DocBook never cared
-# about enum symbols or defines. Yet, they're all (or almost all?)
-# handled inside V4L API sections. So, for now, it is safe to just
-# ignore. This should be revisited, as validating it helps to avoid
-# having something not documented at the uAPI.
-#
-
-# Those symbols should not be used by uAPI - don't document them
-ignore symbol V4L2_BUF_TYPE_PRIVATE
-ignore symbol V4L2_TUNER_DIGITAL_TV
-ignore symbol V4L2_COLORSPACE_BT878
-
-# Documented enum v4l2_field
-replace symbol V4L2_FIELD_ALTERNATE :c:type:`v4l2_field`
-replace symbol V4L2_FIELD_ANY :c:type:`v4l2_field`
-replace symbol V4L2_FIELD_BOTTOM :c:type:`v4l2_field`
-replace symbol V4L2_FIELD_INTERLACED :c:type:`v4l2_field`
-replace symbol V4L2_FIELD_INTERLACED_BT :c:type:`v4l2_field`
-replace symbol V4L2_FIELD_INTERLACED_TB :c:type:`v4l2_field`
-replace symbol V4L2_FIELD_NONE :c:type:`v4l2_field`
-replace symbol V4L2_FIELD_SEQ_BT :c:type:`v4l2_field`
-replace symbol V4L2_FIELD_SEQ_TB :c:type:`v4l2_field`
-replace symbol V4L2_FIELD_TOP :c:type:`v4l2_field`
-
-# Documented enum v4l2_buf_type
-replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_META_OUTPUT :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_SDR_OUTPUT :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_SLICED_VBI_CAPTURE :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_SLICED_VBI_OUTPUT :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_VBI_CAPTURE :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_VBI_OUTPUT :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_VIDEO_CAPTURE :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY :c:type:`v4l2_buf_type`
-replace symbol V4L2_BUF_TYPE_VIDEO_OVERLAY :c:type:`v4l2_buf_type`
-
-# Documented enum v4l2_tuner_type
-replace symbol V4L2_TUNER_ANALOG_TV :c:type:`v4l2_tuner_type`
-replace symbol V4L2_TUNER_RADIO :c:type:`v4l2_tuner_type`
-replace symbol V4L2_TUNER_RF :c:type:`v4l2_tuner_type`
-replace symbol V4L2_TUNER_SDR :c:type:`v4l2_tuner_type`
-
-# Documented enum v4l2_memory
-replace symbol V4L2_MEMORY_DMABUF :c:type:`v4l2_memory`
-replace symbol V4L2_MEMORY_MMAP :c:type:`v4l2_memory`
-replace symbol V4L2_MEMORY_OVERLAY :c:type:`v4l2_memory`
-replace symbol V4L2_MEMORY_USERPTR :c:type:`v4l2_memory`
-
-# Documented enum v4l2_colorspace
-replace symbol V4L2_COLORSPACE_470_SYSTEM_BG :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_470_SYSTEM_M :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_OPRGB :c:type:`v4l2_colorspace`
-replace define V4L2_COLORSPACE_ADOBERGB :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_BT2020 :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_DCI_P3 :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_DEFAULT :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_JPEG :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_RAW :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_REC709 :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_SMPTE170M :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_SMPTE240M :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_SRGB :c:type:`v4l2_colorspace`
-
-# Documented enum v4l2_xfer_func
-replace symbol V4L2_XFER_FUNC_709 :c:type:`v4l2_xfer_func`
-replace symbol V4L2_XFER_FUNC_OPRGB :c:type:`v4l2_xfer_func`
-replace define V4L2_XFER_FUNC_ADOBERGB :c:type:`v4l2_xfer_func`
-replace symbol V4L2_XFER_FUNC_DCI_P3 :c:type:`v4l2_xfer_func`
-replace symbol V4L2_XFER_FUNC_DEFAULT :c:type:`v4l2_xfer_func`
-replace symbol V4L2_XFER_FUNC_NONE :c:type:`v4l2_xfer_func`
-replace symbol V4L2_XFER_FUNC_SMPTE2084 :c:type:`v4l2_xfer_func`
-replace symbol V4L2_XFER_FUNC_SMPTE240M :c:type:`v4l2_xfer_func`
-replace symbol V4L2_XFER_FUNC_SRGB :c:type:`v4l2_xfer_func`
-
-# Documented enum v4l2_ycbcr_encoding
-replace symbol V4L2_YCBCR_ENC_601 :c:type:`v4l2_ycbcr_encoding`
-replace symbol V4L2_YCBCR_ENC_709 :c:type:`v4l2_ycbcr_encoding`
-replace symbol V4L2_YCBCR_ENC_BT2020 :c:type:`v4l2_ycbcr_encoding`
-replace symbol V4L2_YCBCR_ENC_BT2020_CONST_LUM :c:type:`v4l2_ycbcr_encoding`
-replace symbol V4L2_YCBCR_ENC_DEFAULT :c:type:`v4l2_ycbcr_encoding`
-replace symbol V4L2_YCBCR_ENC_SYCC :c:type:`v4l2_ycbcr_encoding`
-replace symbol V4L2_YCBCR_ENC_XV601 :c:type:`v4l2_ycbcr_encoding`
-replace symbol V4L2_YCBCR_ENC_XV709 :c:type:`v4l2_ycbcr_encoding`
-replace symbol V4L2_YCBCR_ENC_SMPTE240M :c:type:`v4l2_ycbcr_encoding`
-
-# Documented enum v4l2_hsv_encoding
-replace symbol V4L2_HSV_ENC_180 :c:type:`v4l2_hsv_encoding`
-replace symbol V4L2_HSV_ENC_256 :c:type:`v4l2_hsv_encoding`
-
-# Documented enum v4l2_quantization
-replace symbol V4L2_QUANTIZATION_DEFAULT :c:type:`v4l2_quantization`
-replace symbol V4L2_QUANTIZATION_FULL_RANGE :c:type:`v4l2_quantization`
-replace symbol V4L2_QUANTIZATION_LIM_RANGE :c:type:`v4l2_quantization`
-
-# Documented enum v4l2_priority
-replace symbol V4L2_PRIORITY_BACKGROUND :c:type:`v4l2_priority`
-replace symbol V4L2_PRIORITY_DEFAULT :c:type:`v4l2_priority`
-replace symbol V4L2_PRIORITY_INTERACTIVE :c:type:`v4l2_priority`
-replace symbol V4L2_PRIORITY_RECORD :c:type:`v4l2_priority`
-replace symbol V4L2_PRIORITY_UNSET :c:type:`v4l2_priority`
-
-# Documented enum v4l2_frmsizetypes
-replace symbol V4L2_FRMSIZE_TYPE_CONTINUOUS :c:type:`v4l2_frmsizetypes`
-replace symbol V4L2_FRMSIZE_TYPE_DISCRETE :c:type:`v4l2_frmsizetypes`
-replace symbol V4L2_FRMSIZE_TYPE_STEPWISE :c:type:`v4l2_frmsizetypes`
-
-# Documented enum frmivaltypes
-replace symbol V4L2_FRMIVAL_TYPE_CONTINUOUS :c:type:`v4l2_frmivaltypes`
-replace symbol V4L2_FRMIVAL_TYPE_DISCRETE :c:type:`v4l2_frmivaltypes`
-replace symbol V4L2_FRMIVAL_TYPE_STEPWISE :c:type:`v4l2_frmivaltypes`
-
-# Documented enum :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_COMPOUND_TYPES vidioc_queryctrl
-
-replace symbol V4L2_CTRL_TYPE_BITMASK :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_BOOLEAN :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_BUTTON :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_CTRL_CLASS :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_INTEGER :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_INTEGER64 :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_INTEGER_MENU :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_MENU :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_STRING :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_U16 :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_U32 :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_U8 :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTIZATION :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_H264_SPS :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_H264_PPS :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_H264_SCALING_MATRIX :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_H264_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_H264_DECODE_PARAMS :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_HEVC_SPS :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
-replace symbol V4L2_CTRL_TYPE_AREA :c:type:`v4l2_ctrl_type`
-
-# V4L2 capability defines
-replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities
-replace define V4L2_CAP_VIDEO_CAPTURE_MPLANE device-capabilities
-replace define V4L2_CAP_VIDEO_OUTPUT device-capabilities
-replace define V4L2_CAP_VIDEO_OUTPUT_MPLANE device-capabilities
-replace define V4L2_CAP_VIDEO_M2M device-capabilities
-replace define V4L2_CAP_VIDEO_M2M_MPLANE device-capabilities
-replace define V4L2_CAP_VIDEO_OVERLAY device-capabilities
-replace define V4L2_CAP_VBI_CAPTURE device-capabilities
-replace define V4L2_CAP_VBI_OUTPUT device-capabilities
-replace define V4L2_CAP_SLICED_VBI_CAPTURE device-capabilities
-replace define V4L2_CAP_SLICED_VBI_OUTPUT device-capabilities
-replace define V4L2_CAP_RDS_CAPTURE device-capabilities
-replace define V4L2_CAP_VIDEO_OUTPUT_OVERLAY device-capabilities
-replace define V4L2_CAP_HW_FREQ_SEEK device-capabilities
-replace define V4L2_CAP_RDS_OUTPUT device-capabilities
-replace define V4L2_CAP_TUNER device-capabilities
-replace define V4L2_CAP_AUDIO device-capabilities
-replace define V4L2_CAP_RADIO device-capabilities
-replace define V4L2_CAP_MODULATOR device-capabilities
-replace define V4L2_CAP_SDR_CAPTURE device-capabilities
-replace define V4L2_CAP_EXT_PIX_FORMAT device-capabilities
-replace define V4L2_CAP_SDR_OUTPUT device-capabilities
-replace define V4L2_CAP_META_CAPTURE device-capabilities
-replace define V4L2_CAP_READWRITE device-capabilities
-replace define V4L2_CAP_ASYNCIO device-capabilities
-replace define V4L2_CAP_STREAMING device-capabilities
-replace define V4L2_CAP_META_OUTPUT device-capabilities
-replace define V4L2_CAP_DEVICE_CAPS device-capabilities
-replace define V4L2_CAP_TOUCH device-capabilities
-
-# V4L2 pix flags
-replace define V4L2_PIX_FMT_PRIV_MAGIC :c:type:`v4l2_pix_format`
-replace define V4L2_PIX_FMT_FLAG_PREMUL_ALPHA reserved-formats
-
-# V4L2 format flags
-replace define V4L2_FMT_FLAG_COMPRESSED fmtdesc-flags
-replace define V4L2_FMT_FLAG_EMULATED fmtdesc-flags
-replace define V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM fmtdesc-flags
-replace define V4L2_FMT_FLAG_DYN_RESOLUTION fmtdesc-flags
-
-# V4L2 timecode types
-replace define V4L2_TC_TYPE_24FPS timecode-type
-replace define V4L2_TC_TYPE_25FPS timecode-type
-replace define V4L2_TC_TYPE_30FPS timecode-type
-replace define V4L2_TC_TYPE_50FPS timecode-type
-replace define V4L2_TC_TYPE_60FPS timecode-type
-
-# V4L2 timecode flags
-replace define V4L2_TC_FLAG_DROPFRAME timecode-flags
-replace define V4L2_TC_FLAG_COLORFRAME timecode-flags
-replace define V4L2_TC_USERBITS_field timecode-flags
-replace define V4L2_TC_USERBITS_USERDEFINED timecode-flags
-replace define V4L2_TC_USERBITS_8BITCHARS timecode-flags
-
-# V4L2 JPEG markers
-replace define V4L2_JPEG_MARKER_DHT jpeg-markers
-replace define V4L2_JPEG_MARKER_DQT jpeg-markers
-replace define V4L2_JPEG_MARKER_DRI jpeg-markers
-replace define V4L2_JPEG_MARKER_COM jpeg-markers
-replace define V4L2_JPEG_MARKER_APP jpeg-markers
-
-# V4L2 framebuffer caps and flags
-
-replace define V4L2_FBUF_CAP_EXTERNOVERLAY framebuffer-cap
-replace define V4L2_FBUF_CAP_CHROMAKEY framebuffer-cap
-replace define V4L2_FBUF_CAP_LIST_CLIPPING framebuffer-cap
-replace define V4L2_FBUF_CAP_BITMAP_CLIPPING framebuffer-cap
-replace define V4L2_FBUF_CAP_LOCAL_ALPHA framebuffer-cap
-replace define V4L2_FBUF_CAP_GLOBAL_ALPHA framebuffer-cap
-replace define V4L2_FBUF_CAP_LOCAL_INV_ALPHA framebuffer-cap
-replace define V4L2_FBUF_CAP_SRC_CHROMAKEY framebuffer-cap
-
-replace define V4L2_FBUF_FLAG_PRIMARY framebuffer-flags
-replace define V4L2_FBUF_FLAG_OVERLAY framebuffer-flags
-replace define V4L2_FBUF_FLAG_CHROMAKEY framebuffer-flags
-replace define V4L2_FBUF_FLAG_LOCAL_ALPHA framebuffer-flags
-replace define V4L2_FBUF_FLAG_GLOBAL_ALPHA framebuffer-flags
-replace define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA framebuffer-flags
-replace define V4L2_FBUF_FLAG_SRC_CHROMAKEY framebuffer-flags
-
-# Used on VIDIOC_G_PARM
-
-replace define V4L2_MODE_HIGHQUALITY parm-flags
-replace define V4L2_CAP_TIMEPERFRAME :c:type:`v4l2_captureparm`
-
-# The V4L2_STD_foo are all defined at v4l2_std_id table
-
-replace define V4L2_STD_PAL_B v4l2-std-id
-replace define V4L2_STD_PAL_B1 v4l2-std-id
-replace define V4L2_STD_PAL_G v4l2-std-id
-replace define V4L2_STD_PAL_H v4l2-std-id
-replace define V4L2_STD_PAL_I v4l2-std-id
-replace define V4L2_STD_PAL_D v4l2-std-id
-replace define V4L2_STD_PAL_D1 v4l2-std-id
-replace define V4L2_STD_PAL_K v4l2-std-id
-replace define V4L2_STD_PAL_M v4l2-std-id
-replace define V4L2_STD_PAL_N v4l2-std-id
-replace define V4L2_STD_PAL_Nc v4l2-std-id
-replace define V4L2_STD_PAL_60 v4l2-std-id
-replace define V4L2_STD_NTSC_M v4l2-std-id
-replace define V4L2_STD_NTSC_M_JP v4l2-std-id
-replace define V4L2_STD_NTSC_443 v4l2-std-id
-replace define V4L2_STD_NTSC_M_KR v4l2-std-id
-replace define V4L2_STD_SECAM_B v4l2-std-id
-replace define V4L2_STD_SECAM_D v4l2-std-id
-replace define V4L2_STD_SECAM_G v4l2-std-id
-replace define V4L2_STD_SECAM_H v4l2-std-id
-replace define V4L2_STD_SECAM_K v4l2-std-id
-replace define V4L2_STD_SECAM_K1 v4l2-std-id
-replace define V4L2_STD_SECAM_L v4l2-std-id
-replace define V4L2_STD_SECAM_LC v4l2-std-id
-replace define V4L2_STD_ATSC_8_VSB v4l2-std-id
-replace define V4L2_STD_ATSC_16_VSB v4l2-std-id
-replace define V4L2_STD_NTSC v4l2-std-id
-replace define V4L2_STD_SECAM_DK v4l2-std-id
-replace define V4L2_STD_SECAM v4l2-std-id
-replace define V4L2_STD_PAL_BG v4l2-std-id
-replace define V4L2_STD_PAL_DK v4l2-std-id
-replace define V4L2_STD_PAL v4l2-std-id
-replace define V4L2_STD_B v4l2-std-id
-replace define V4L2_STD_G v4l2-std-id
-replace define V4L2_STD_H v4l2-std-id
-replace define V4L2_STD_L v4l2-std-id
-replace define V4L2_STD_GH v4l2-std-id
-replace define V4L2_STD_DK v4l2-std-id
-replace define V4L2_STD_BG v4l2-std-id
-replace define V4L2_STD_MN v4l2-std-id
-replace define V4L2_STD_MTS v4l2-std-id
-replace define V4L2_STD_525_60 v4l2-std-id
-replace define V4L2_STD_625_50 v4l2-std-id
-replace define V4L2_STD_ATSC v4l2-std-id
-replace define V4L2_STD_UNKNOWN v4l2-std-id
-replace define V4L2_STD_ALL v4l2-std-id
-
-# V4L2 DT BT timings definitions
-
-replace define V4L2_DV_PROGRESSIVE :c:type:`v4l2_bt_timings`
-replace define V4L2_DV_INTERLACED :c:type:`v4l2_bt_timings`
-
-replace define V4L2_DV_VSYNC_POS_POL :c:type:`v4l2_bt_timings`
-replace define V4L2_DV_HSYNC_POS_POL :c:type:`v4l2_bt_timings`
-
-replace define V4L2_DV_BT_STD_CEA861 dv-bt-standards
-replace define V4L2_DV_BT_STD_DMT dv-bt-standards
-replace define V4L2_DV_BT_STD_CVT dv-bt-standards
-replace define V4L2_DV_BT_STD_GTF dv-bt-standards
-replace define V4L2_DV_BT_STD_SDI dv-bt-standards
-
-replace define V4L2_DV_FL_REDUCED_BLANKING dv-bt-standards
-replace define V4L2_DV_FL_CAN_REDUCE_FPS dv-bt-standards
-replace define V4L2_DV_FL_CAN_DETECT_REDUCED_FPS dv-bt-standards
-replace define V4L2_DV_FL_REDUCED_FPS dv-bt-standards
-replace define V4L2_DV_FL_HALF_LINE dv-bt-standards
-replace define V4L2_DV_FL_IS_CE_VIDEO dv-bt-standards
-replace define V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE dv-bt-standards
-replace define V4L2_DV_FL_HAS_PICTURE_ASPECT dv-bt-standards
-replace define V4L2_DV_FL_HAS_CEA861_VIC dv-bt-standards
-replace define V4L2_DV_FL_HAS_HDMI_VIC dv-bt-standards
-
-replace define V4L2_DV_BT_656_1120 dv-timing-types
-
-replace define V4L2_DV_BT_CAP_INTERLACED framebuffer-cap
-replace define V4L2_DV_BT_CAP_PROGRESSIVE framebuffer-cap
-replace define V4L2_DV_BT_CAP_REDUCED_BLANKING framebuffer-cap
-replace define V4L2_DV_BT_CAP_CUSTOM framebuffer-cap
-
-# V4L2 input
-
-replace define V4L2_INPUT_TYPE_TUNER input-type
-replace define V4L2_INPUT_TYPE_CAMERA input-type
-replace define V4L2_INPUT_TYPE_TOUCH input-type
-
-replace define V4L2_IN_ST_NO_POWER input-status
-replace define V4L2_IN_ST_NO_SIGNAL input-status
-replace define V4L2_IN_ST_NO_COLOR input-status
-replace define V4L2_IN_ST_HFLIP input-status
-replace define V4L2_IN_ST_VFLIP input-status
-replace define V4L2_IN_ST_NO_H_LOCK input-status
-replace define V4L2_IN_ST_COLOR_KILL input-status
-replace define V4L2_IN_ST_NO_SYNC input-status
-replace define V4L2_IN_ST_NO_EQU input-status
-replace define V4L2_IN_ST_NO_CARRIER input-status
-replace define V4L2_IN_ST_MACROVISION input-status
-replace define V4L2_IN_ST_NO_ACCESS input-status
-replace define V4L2_IN_ST_VTR input-status
-replace define V4L2_IN_ST_NO_V_LOCK input-status
-replace define V4L2_IN_ST_NO_STD_LOCK input-status
-
-replace define V4L2_IN_CAP_DV_TIMINGS input-capabilities
-replace define V4L2_IN_CAP_STD input-capabilities
-replace define V4L2_IN_CAP_NATIVE_SIZE input-capabilities
-
-# V4L2 output
-
-replace define V4L2_OUTPUT_TYPE_MODULATOR output-type
-replace define V4L2_OUTPUT_TYPE_ANALOG output-type
-replace define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY output-type
-
-replace define V4L2_OUT_CAP_DV_TIMINGS output-capabilities
-replace define V4L2_OUT_CAP_STD output-capabilities
-replace define V4L2_OUT_CAP_NATIVE_SIZE output-capabilities
-
-# V4L2 control flags
-
-replace define V4L2_CTRL_FLAG_DISABLED control-flags
-replace define V4L2_CTRL_FLAG_GRABBED control-flags
-replace define V4L2_CTRL_FLAG_READ_ONLY control-flags
-replace define V4L2_CTRL_FLAG_UPDATE control-flags
-replace define V4L2_CTRL_FLAG_INACTIVE control-flags
-replace define V4L2_CTRL_FLAG_SLIDER control-flags
-replace define V4L2_CTRL_FLAG_WRITE_ONLY control-flags
-replace define V4L2_CTRL_FLAG_VOLATILE control-flags
-replace define V4L2_CTRL_FLAG_HAS_PAYLOAD control-flags
-replace define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE control-flags
-replace define V4L2_CTRL_FLAG_MODIFY_LAYOUT control-flags
-
-replace define V4L2_CTRL_FLAG_NEXT_CTRL control
-replace define V4L2_CTRL_FLAG_NEXT_COMPOUND control
-replace define V4L2_CID_PRIVATE_BASE control
-
-# V4L2 tuner
-
-replace define V4L2_TUNER_CAP_LOW tuner-capability
-replace define V4L2_TUNER_CAP_NORM tuner-capability
-replace define V4L2_TUNER_CAP_HWSEEK_BOUNDED tuner-capability
-replace define V4L2_TUNER_CAP_HWSEEK_WRAP tuner-capability
-replace define V4L2_TUNER_CAP_STEREO tuner-capability
-replace define V4L2_TUNER_CAP_LANG2 tuner-capability
-replace define V4L2_TUNER_CAP_SAP tuner-capability
-replace define V4L2_TUNER_CAP_LANG1 tuner-capability
-replace define V4L2_TUNER_CAP_RDS tuner-capability
-replace define V4L2_TUNER_CAP_RDS_BLOCK_IO tuner-capability
-replace define V4L2_TUNER_CAP_RDS_CONTROLS tuner-capability
-replace define V4L2_TUNER_CAP_FREQ_BANDS tuner-capability
-replace define V4L2_TUNER_CAP_HWSEEK_PROG_LIM tuner-capability
-replace define V4L2_TUNER_CAP_1HZ tuner-capability
-
-replace define V4L2_TUNER_SUB_MONO tuner-rxsubchans
-replace define V4L2_TUNER_SUB_STEREO tuner-rxsubchans
-replace define V4L2_TUNER_SUB_LANG2 tuner-rxsubchans
-replace define V4L2_TUNER_SUB_SAP tuner-rxsubchans
-replace define V4L2_TUNER_SUB_LANG1 tuner-rxsubchans
-replace define V4L2_TUNER_SUB_RDS tuner-rxsubchans
-
-replace define V4L2_TUNER_MODE_MONO tuner-audmode
-replace define V4L2_TUNER_MODE_STEREO tuner-audmode
-replace define V4L2_TUNER_MODE_LANG2 tuner-audmode
-replace define V4L2_TUNER_MODE_SAP tuner-audmode
-replace define V4L2_TUNER_MODE_LANG1 tuner-audmode
-replace define V4L2_TUNER_MODE_LANG1_LANG2 tuner-audmode
-
-replace define V4L2_BAND_MODULATION_VSB band-modulation
-replace define V4L2_BAND_MODULATION_FM band-modulation
-replace define V4L2_BAND_MODULATION_AM band-modulation
-
-replace define V4L2_RDS_BLOCK_MSK v4l2-rds-block
-replace define V4L2_RDS_BLOCK_A v4l2-rds-block
-replace define V4L2_RDS_BLOCK_B v4l2-rds-block
-replace define V4L2_RDS_BLOCK_C v4l2-rds-block
-replace define V4L2_RDS_BLOCK_D v4l2-rds-block
-replace define V4L2_RDS_BLOCK_C_ALT v4l2-rds-block
-replace define V4L2_RDS_BLOCK_INVALID v4l2-rds-block
-replace define V4L2_RDS_BLOCK_CORRECTED v4l2-rds-block
-replace define V4L2_RDS_BLOCK_ERROR v4l2-rds-block
-
-# V4L2 audio
-
-replace define V4L2_AUDCAP_STEREO audio-capability
-replace define V4L2_AUDCAP_AVL audio-capability
-
-replace define V4L2_AUDMODE_AVL audio-mode
-
-# MPEG
-
-replace define V4L2_ENC_IDX_FRAME_I :c:type:`v4l2_enc_idx`
-replace define V4L2_ENC_IDX_FRAME_P :c:type:`v4l2_enc_idx`
-replace define V4L2_ENC_IDX_FRAME_B :c:type:`v4l2_enc_idx`
-replace define V4L2_ENC_IDX_FRAME_MASK :c:type:`v4l2_enc_idx`
-replace define V4L2_ENC_IDX_ENTRIES :c:type:`v4l2_enc_idx`
-
-replace define V4L2_ENC_CMD_START encoder-cmds
-replace define V4L2_ENC_CMD_STOP encoder-cmds
-replace define V4L2_ENC_CMD_PAUSE encoder-cmds
-replace define V4L2_ENC_CMD_RESUME encoder-cmds
-
-replace define V4L2_ENC_CMD_STOP_AT_GOP_END encoder-flags
-
-replace define V4L2_DEC_CMD_START decoder-cmds
-replace define V4L2_DEC_CMD_STOP decoder-cmds
-replace define V4L2_DEC_CMD_PAUSE decoder-cmds
-replace define V4L2_DEC_CMD_RESUME decoder-cmds
-replace define V4L2_DEC_CMD_FLUSH decoder-cmds
-
-replace define V4L2_DEC_CMD_START_MUTE_AUDIO decoder-cmds
-replace define V4L2_DEC_CMD_PAUSE_TO_BLACK decoder-cmds
-replace define V4L2_DEC_CMD_STOP_TO_BLACK decoder-cmds
-replace define V4L2_DEC_CMD_STOP_IMMEDIATELY decoder-cmds
-
-replace define V4L2_DEC_START_FMT_NONE decoder-cmds
-replace define V4L2_DEC_START_FMT_GOP decoder-cmds
-
-# V4L2 VBI
-
-replace define V4L2_VBI_UNSYNC vbifmt-flags
-replace define V4L2_VBI_INTERLACED vbifmt-flags
-
-replace define V4L2_VBI_ITU_525_F1_START :c:type:`v4l2_vbi_format`
-replace define V4L2_VBI_ITU_525_F2_START :c:type:`v4l2_vbi_format`
-replace define V4L2_VBI_ITU_625_F1_START :c:type:`v4l2_vbi_format`
-replace define V4L2_VBI_ITU_625_F2_START :c:type:`v4l2_vbi_format`
-
-
-replace define V4L2_SLICED_TELETEXT_B vbi-services
-replace define V4L2_SLICED_VPS vbi-services
-replace define V4L2_SLICED_CAPTION_525 vbi-services
-replace define V4L2_SLICED_WSS_625 vbi-services
-replace define V4L2_SLICED_VBI_525 vbi-services
-replace define V4L2_SLICED_VBI_625 vbi-services
-
-replace define V4L2_MPEG_VBI_IVTV_TELETEXT_B ITV0-Line-Identifier-Constants
-replace define V4L2_MPEG_VBI_IVTV_CAPTION_525 ITV0-Line-Identifier-Constants
-replace define V4L2_MPEG_VBI_IVTV_WSS_625 ITV0-Line-Identifier-Constants
-replace define V4L2_MPEG_VBI_IVTV_VPS ITV0-Line-Identifier-Constants
-
-replace define V4L2_MPEG_VBI_IVTV_MAGIC0 v4l2-mpeg-vbi-fmt-ivtv-magic
-replace define V4L2_MPEG_VBI_IVTV_MAGIC1 v4l2-mpeg-vbi-fmt-ivtv-magic
-
-# V4L2 events
-
-replace define V4L2_EVENT_ALL event-type
-replace define V4L2_EVENT_VSYNC event-type
-replace define V4L2_EVENT_EOS event-type
-replace define V4L2_EVENT_CTRL event-type
-replace define V4L2_EVENT_FRAME_SYNC event-type
-replace define V4L2_EVENT_SOURCE_CHANGE event-type
-replace define V4L2_EVENT_MOTION_DET event-type
-replace define V4L2_EVENT_PRIVATE_START event-type
-
-replace define V4L2_EVENT_CTRL_CH_VALUE ctrl-changes-flags
-replace define V4L2_EVENT_CTRL_CH_FLAGS ctrl-changes-flags
-replace define V4L2_EVENT_CTRL_CH_RANGE ctrl-changes-flags
-
-replace define V4L2_EVENT_SRC_CH_RESOLUTION src-changes-flags
-
-replace define V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ :c:type:`v4l2_event_motion_det`
-
-replace define V4L2_EVENT_SUB_FL_SEND_INITIAL event-flags
-replace define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK event-flags
-
-# V4L2 debugging
-replace define V4L2_CHIP_MATCH_BRIDGE vidioc_dbg_g_register
-replace define V4L2_CHIP_MATCH_SUBDEV vidioc_dbg_g_register
-replace define V4L2_CHIP_MATCH_HOST vidioc_dbg_g_register
-replace define V4L2_CHIP_MATCH_I2C_DRIVER vidioc_dbg_g_register
-replace define V4L2_CHIP_MATCH_I2C_ADDR vidioc_dbg_g_register
-replace define V4L2_CHIP_MATCH_AC97 vidioc_dbg_g_register
-
-replace define V4L2_CHIP_FL_READABLE vidioc_dbg_g_register
-replace define V4L2_CHIP_FL_WRITABLE vidioc_dbg_g_register
-
-# Ignore reserved ioctl and ancillary macros
-
-ignore define VIDEO_MAX_FRAME
-ignore define VIDEO_MAX_PLANES
-ignore define v4l2_fourcc
-ignore define v4l2_fourcc_be
-ignore define V4L2_FIELD_HAS_TOP
-ignore define V4L2_FIELD_HAS_BOTTOM
-ignore define V4L2_FIELD_HAS_BOTH
-ignore define V4L2_FIELD_HAS_T_OR_B
-ignore define V4L2_TYPE_IS_MULTIPLANAR
-ignore define V4L2_TYPE_IS_OUTPUT
-ignore define V4L2_TUNER_ADC
-ignore define V4L2_MAP_COLORSPACE_DEFAULT
-ignore define V4L2_MAP_XFER_FUNC_DEFAULT
-ignore define V4L2_MAP_YCBCR_ENC_DEFAULT
-ignore define V4L2_DV_BT_BLANKING_WIDTH
-ignore define V4L2_DV_BT_FRAME_WIDTH
-ignore define V4L2_DV_BT_BLANKING_HEIGHT
-ignore define V4L2_DV_BT_FRAME_HEIGHT
-ignore define V4L2_IN_CAP_CUSTOM_TIMINGS
-ignore define V4L2_CTRL_ID_MASK
-ignore define V4L2_CTRL_ID2CLASS
-ignore define V4L2_CTRL_ID2WHICH
-ignore define V4L2_CTRL_DRIVER_PRIV
-ignore define V4L2_CTRL_MAX_DIMS
-ignore define V4L2_CTRL_WHICH_CUR_VAL
-ignore define V4L2_CTRL_WHICH_DEF_VAL
-ignore define V4L2_CTRL_WHICH_REQUEST_VAL
-ignore define V4L2_OUT_CAP_CUSTOM_TIMINGS
-ignore define V4L2_CID_MAX_CTRLS
-
-ignore define BASE_VIDIOC_PRIVATE
-
-# Associate ioctls with their counterparts
-replace ioctl VIDIOC_DBG_S_REGISTER vidioc_dbg_g_register
-replace ioctl VIDIOC_DQBUF vidioc_qbuf
-replace ioctl VIDIOC_S_AUDOUT vidioc_g_audout
-replace ioctl VIDIOC_S_CROP vidioc_g_crop
-replace ioctl VIDIOC_S_CTRL vidioc_g_ctrl
-replace ioctl VIDIOC_S_DV_TIMINGS vidioc_g_dv_timings
-replace ioctl VIDIOC_S_EDID vidioc_g_edid
-replace ioctl VIDIOC_S_EXT_CTRLS vidioc_g_ext_ctrls
-replace ioctl VIDIOC_S_FBUF vidioc_g_fbuf
-replace ioctl VIDIOC_S_FMT vidioc_g_fmt
-replace ioctl VIDIOC_S_FREQUENCY vidioc_g_frequency
-replace ioctl VIDIOC_S_INPUT vidioc_g_input
-replace ioctl VIDIOC_S_JPEGCOMP vidioc_g_jpegcomp
-replace ioctl VIDIOC_S_MODULATOR vidioc_g_modulator
-replace ioctl VIDIOC_S_OUTPUT vidioc_g_output
-replace ioctl VIDIOC_S_PARM vidioc_g_parm
-replace ioctl VIDIOC_S_PRIORITY vidioc_g_priority
-replace ioctl VIDIOC_S_SELECTION vidioc_g_selection
-replace ioctl VIDIOC_S_STD vidioc_g_std
-replace ioctl VIDIOC_S_AUDIO vidioc_g_audio
-replace ioctl VIDIOC_S_TUNER vidioc_g_tuner
-replace ioctl VIDIOC_TRY_DECODER_CMD vidioc_decoder_cmd
-replace ioctl VIDIOC_TRY_ENCODER_CMD vidioc_encoder_cmd
-replace ioctl VIDIOC_TRY_EXT_CTRLS vidioc_g_ext_ctrls
-replace ioctl VIDIOC_TRY_FMT vidioc_g_fmt
-replace ioctl VIDIOC_STREAMOFF vidioc_streamon
-replace ioctl VIDIOC_QUERY_EXT_CTRL vidioc_queryctrl
-replace ioctl VIDIOC_QUERYMENU vidioc_queryctrl
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index e1c355e84edd..eaabc3134294 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -620,7 +620,7 @@ because the CPUs that the Linux kernel supports don't do writes
 until they are certain (1) that the write will actually happen, (2)
 of the location of the write, and (3) of the value to be written.
 But please carefully read the "CONTROL DEPENDENCIES" section and the
-Documentation/RCU/rcu_dereference.txt file:  The compiler can and does
+Documentation/RCU/rcu_dereference.rst file:  The compiler can and does
 break dependencies in a great many highly creative ways.
 
 	CPU 1		      CPU 2
diff --git a/Documentation/networking/6pack.rst b/Documentation/networking/6pack.rst
new file mode 100644
index 000000000000..bc5bf1f1a98f
--- /dev/null
+++ b/Documentation/networking/6pack.rst
@@ -0,0 +1,191 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============
+6pack Protocol
+==============
+
+This is the 6pack-mini-HOWTO, written by
+
+Andreas Könsgen DG3KQ
+
+:Internet: ajk@comnets.uni-bremen.de
+:AMPR-net: dg3kq@db0pra.ampr.org
+:AX.25:    dg3kq@db0ach.#nrw.deu.eu
+
+Last update: April 7, 1998
+
+1. What is 6pack, and what are the advantages to KISS?
+======================================================
+
+6pack is a transmission protocol for data exchange between the PC and
+the TNC over a serial line. It can be used as an alternative to KISS.
+
+6pack has two major advantages:
+
+- The PC is given full control over the radio
+  channel. Special control data is exchanged between the PC and the TNC so
+  that the PC knows at any time if the TNC is receiving data, if a TNC
+  buffer underrun or overrun has occurred, if the PTT is
+  set and so on. This control data is processed at a higher priority than
+  normal data, so a data stream can be interrupted at any time to issue an
+  important event. This helps to improve the channel access and timing
+  algorithms as everything is computed in the PC. It would even be possible
+  to experiment with something completely different from the known CSMA and
+  DAMA channel access methods.
+  This kind of real-time control is especially important to supply several
+  TNCs that are connected between each other and the PC by a daisy chain
+  (however, this feature is not supported yet by the Linux 6pack driver).
+
+- Each packet transferred over the serial line is supplied with a checksum,
+  so it is easy to detect errors due to problems on the serial line.
+  Received packets that are corrupt are not passed on to the AX.25 layer.
+  Damaged packets that the TNC has received from the PC are not transmitted.
+
+More details about 6pack are described in the file 6pack.ps that is located
+in the doc directory of the AX.25 utilities package.
+
+2. Who has developed the 6pack protocol?
+========================================
+
+The 6pack protocol has been developed by Ekki Plicht DF4OR, Henning Rech
+DF9IC and Gunter Jost DK7WJ. A driver for 6pack, written by Gunter Jost and
+Matthias Welwarsky DG2FEF, comes along with the PC version of FlexNet.
+They have also written a firmware for TNCs to perform the 6pack
+protocol (see section 4 below).
+
+3. Where can I get the latest version of 6pack for LinuX?
+=========================================================
+
+At the moment, the 6pack stuff can obtained via anonymous ftp from
+db0bm.automation.fh-aachen.de. In the directory /incoming/dg3kq,
+there is a file named 6pack.tgz.
+
+4. Preparing the TNC for 6pack operation
+========================================
+
+To be able to use 6pack, a special firmware for the TNC is needed. The EPROM
+of a newly bought TNC does not contain 6pack, so you will have to
+program an EPROM yourself. The image file for 6pack EPROMs should be
+available on any packet radio box where PC/FlexNet can be found. The name of
+the file is 6pack.bin. This file is copyrighted and maintained by the FlexNet
+team. It can be used under the terms of the license that comes along
+with PC/FlexNet. Please do not ask me about the internals of this file as I
+don't know anything about it. I used a textual description of the 6pack
+protocol to program the Linux driver.
+
+TNCs contain a 64kByte EPROM, the lower half of which is used for
+the firmware/KISS. The upper half is either empty or is sometimes
+programmed with software called TAPR. In the latter case, the TNC
+is supplied with a DIP switch so you can easily change between the
+two systems. When programming a new EPROM, one of the systems is replaced
+by 6pack. It is useful to replace TAPR, as this software is rarely used
+nowadays. If your TNC is not equipped with the switch mentioned above, you
+can build in one yourself that switches over the highest address pin
+of the EPROM between HIGH and LOW level. After having inserted the new EPROM
+and switched to 6pack, apply power to the TNC for a first test. The connect
+and the status LED are lit for about a second if the firmware initialises
+the TNC correctly.
+
+5. Building and installing the 6pack driver
+===========================================
+
+The driver has been tested with kernel version 2.1.90. Use with older
+kernels may lead to a compilation error because the interface to a kernel
+function has been changed in the 2.1.8x kernels.
+
+How to turn on 6pack support:
+=============================
+
+- In the linux kernel configuration program, select the code maturity level
+  options menu and turn on the prompting for development drivers.
+
+- Select the amateur radio support menu and turn on the serial port 6pack
+  driver.
+
+- Compile and install the kernel and the modules.
+
+To use the driver, the kissattach program delivered with the AX.25 utilities
+has to be modified.
+
+- Do a cd to the directory that holds the kissattach sources. Edit the
+  kissattach.c file. At the top, insert the following lines::
+
+    #ifndef N_6PACK
+    #define N_6PACK (N_AX25+1)
+    #endif
+
+  Then find the line:
+
+    int disc = N_AX25;
+
+  and replace N_AX25 by N_6PACK.
+
+- Recompile kissattach. Rename it to spattach to avoid confusions.
+
+Installing the driver:
+----------------------
+
+- Do an insmod 6pack. Look at your /var/log/messages file to check if the
+  module has printed its initialization message.
+
+- Do a spattach as you would launch kissattach when starting a KISS port.
+  Check if the kernel prints the message '6pack: TNC found'.
+
+- From here, everything should work as if you were setting up a KISS port.
+  The only difference is that the network device that represents
+  the 6pack port is called sp instead of sl or ax. So, sp0 would be the
+  first 6pack port.
+
+Although the driver has been tested on various platforms, I still declare it
+ALPHA. BE CAREFUL! Sync your disks before insmoding the 6pack module
+and spattaching. Watch out if your computer behaves strangely. Read section
+6 of this file about known problems.
+
+Note that the connect and status LEDs of the TNC are controlled in a
+different way than they are when the TNC is used with PC/FlexNet. When using
+FlexNet, the connect LED is on if there is a connection; the status LED is
+on if there is data in the buffer of the PC's AX.25 engine that has to be
+transmitted. Under Linux, the 6pack layer is beyond the AX.25 layer,
+so the 6pack driver doesn't know anything about connects or data that
+has not yet been transmitted. Therefore the LEDs are controlled
+as they are in KISS mode: The connect LED is turned on if data is transferred
+from the PC to the TNC over the serial line, the status LED if data is
+sent to the PC.
+
+6. Known problems
+=================
+
+When testing the driver with 2.0.3x kernels and
+operating with data rates on the radio channel of 9600 Baud or higher,
+the driver may, on certain systems, sometimes print the message '6pack:
+bad checksum', which is due to data loss if the other station sends two
+or more subsequent packets. I have been told that this is due to a problem
+with the serial driver of 2.0.3x kernels. I don't know yet if the problem
+still exists with 2.1.x kernels, as I have heard that the serial driver
+code has been changed with 2.1.x.
+
+When shutting down the sp interface with ifconfig, the kernel crashes if
+there is still an AX.25 connection left over which an IP connection was
+running, even if that IP connection is already closed. The problem does not
+occur when there is a bare AX.25 connection still running. I don't know if
+this is a problem of the 6pack driver or something else in the kernel.
+
+The driver has been tested as a module, not yet as a kernel-builtin driver.
+
+The 6pack protocol supports daisy-chaining of TNCs in a token ring, which is
+connected to one serial port of the PC. This feature is not implemented
+and at least at the moment I won't be able to do it because I do not have
+the opportunity to build a TNC daisy-chain and test it.
+
+Some of the comments in the source code are inaccurate. They are left from
+the SLIP/KISS driver, from which the 6pack driver has been derived.
+I haven't modified or removed them yet -- sorry! The code itself needs
+some cleaning and optimizing. This will be done in a later release.
+
+If you encounter a bug or if you have a question or suggestion concerning the
+driver, feel free to mail me, using the addresses given at the beginning of
+this file.
+
+Have fun!
+
+Andreas
diff --git a/Documentation/networking/6pack.txt b/Documentation/networking/6pack.txt
deleted file mode 100644
index 8f339428fdf4..000000000000
--- a/Documentation/networking/6pack.txt
+++ /dev/null
@@ -1,175 +0,0 @@
-This is the 6pack-mini-HOWTO, written by
-
-Andreas Könsgen DG3KQ
-Internet: ajk@comnets.uni-bremen.de
-AMPR-net: dg3kq@db0pra.ampr.org
-AX.25:    dg3kq@db0ach.#nrw.deu.eu
-
-Last update: April 7, 1998
-
-1. What is 6pack, and what are the advantages to KISS?
-
-6pack is a transmission protocol for data exchange between the PC and
-the TNC over a serial line. It can be used as an alternative to KISS.
-
-6pack has two major advantages:
-- The PC is given full control over the radio
-  channel. Special control data is exchanged between the PC and the TNC so
-  that the PC knows at any time if the TNC is receiving data, if a TNC
-  buffer underrun or overrun has occurred, if the PTT is
-  set and so on. This control data is processed at a higher priority than
-  normal data, so a data stream can be interrupted at any time to issue an
-  important event. This helps to improve the channel access and timing 
-  algorithms as everything is computed in the PC. It would even be possible 
-  to experiment with something completely different from the known CSMA and 
-  DAMA channel access methods.
-  This kind of real-time control is especially important to supply several
-  TNCs that are connected between each other and the PC by a daisy chain
-  (however, this feature is not supported yet by the Linux 6pack driver).
-
-- Each packet transferred over the serial line is supplied with a checksum,
-  so it is easy to detect errors due to problems on the serial line.
-  Received packets that are corrupt are not passed on to the AX.25 layer.
-  Damaged packets that the TNC has received from the PC are not transmitted.
-
-More details about 6pack are described in the file 6pack.ps that is located
-in the doc directory of the AX.25 utilities package.
-
-2. Who has developed the 6pack protocol?
-
-The 6pack protocol has been developed by Ekki Plicht DF4OR, Henning Rech
-DF9IC and Gunter Jost DK7WJ. A driver for 6pack, written by Gunter Jost and
-Matthias Welwarsky DG2FEF, comes along with the PC version of FlexNet.
-They have also written a firmware for TNCs to perform the 6pack
-protocol (see section 4 below).
-
-3. Where can I get the latest version of 6pack for LinuX?
-
-At the moment, the 6pack stuff can obtained via anonymous ftp from
-db0bm.automation.fh-aachen.de. In the directory /incoming/dg3kq,
-there is a file named 6pack.tgz.
-
-4. Preparing the TNC for 6pack operation
-
-To be able to use 6pack, a special firmware for the TNC is needed. The EPROM
-of a newly bought TNC does not contain 6pack, so you will have to
-program an EPROM yourself. The image file for 6pack EPROMs should be
-available on any packet radio box where PC/FlexNet can be found. The name of
-the file is 6pack.bin. This file is copyrighted and maintained by the FlexNet
-team. It can be used under the terms of the license that comes along
-with PC/FlexNet. Please do not ask me about the internals of this file as I
-don't know anything about it. I used a textual description of the 6pack
-protocol to program the Linux driver.
-
-TNCs contain a 64kByte EPROM, the lower half of which is used for
-the firmware/KISS. The upper half is either empty or is sometimes
-programmed with software called TAPR. In the latter case, the TNC
-is supplied with a DIP switch so you can easily change between the
-two systems. When programming a new EPROM, one of the systems is replaced
-by 6pack. It is useful to replace TAPR, as this software is rarely used
-nowadays. If your TNC is not equipped with the switch mentioned above, you
-can build in one yourself that switches over the highest address pin
-of the EPROM between HIGH and LOW level. After having inserted the new EPROM
-and switched to 6pack, apply power to the TNC for a first test. The connect
-and the status LED are lit for about a second if the firmware initialises
-the TNC correctly.
-
-5. Building and installing the 6pack driver
-
-The driver has been tested with kernel version 2.1.90. Use with older
-kernels may lead to a compilation error because the interface to a kernel
-function has been changed in the 2.1.8x kernels.
-
-How to turn on 6pack support:
-
-- In the linux kernel configuration program, select the code maturity level
-  options menu and turn on the prompting for development drivers.
-
-- Select the amateur radio support menu and turn on the serial port 6pack
-  driver.
-
-- Compile and install the kernel and the modules.
-
-To use the driver, the kissattach program delivered with the AX.25 utilities
-has to be modified.
-
-- Do a cd to the directory that holds the kissattach sources. Edit the
-  kissattach.c file. At the top, insert the following lines:
-
-  #ifndef N_6PACK
-  #define N_6PACK (N_AX25+1)
-  #endif
-
-  Then find the line
-   
-  int disc = N_AX25;
-
-  and replace N_AX25 by N_6PACK.
-
-- Recompile kissattach. Rename it to spattach to avoid confusions.
-
-Installing the driver:
-
-- Do an insmod 6pack. Look at your /var/log/messages file to check if the 
-  module has printed its initialization message.
-
-- Do a spattach as you would launch kissattach when starting a KISS port.
-  Check if the kernel prints the message '6pack: TNC found'. 
-
-- From here, everything should work as if you were setting up a KISS port.
-  The only difference is that the network device that represents
-  the 6pack port is called sp instead of sl or ax. So, sp0 would be the
-  first 6pack port.
-
-Although the driver has been tested on various platforms, I still declare it
-ALPHA. BE CAREFUL! Sync your disks before insmoding the 6pack module
-and spattaching. Watch out if your computer behaves strangely. Read section
-6 of this file about known problems.
-
-Note that the connect and status LEDs of the TNC are controlled in a
-different way than they are when the TNC is used with PC/FlexNet. When using
-FlexNet, the connect LED is on if there is a connection; the status LED is
-on if there is data in the buffer of the PC's AX.25 engine that has to be
-transmitted. Under Linux, the 6pack layer is beyond the AX.25 layer,
-so the 6pack driver doesn't know anything about connects or data that
-has not yet been transmitted. Therefore the LEDs are controlled
-as they are in KISS mode: The connect LED is turned on if data is transferred
-from the PC to the TNC over the serial line, the status LED if data is
-sent to the PC.
-
-6. Known problems
-
-When testing the driver with 2.0.3x kernels and
-operating with data rates on the radio channel of 9600 Baud or higher,
-the driver may, on certain systems, sometimes print the message '6pack:
-bad checksum', which is due to data loss if the other station sends two
-or more subsequent packets. I have been told that this is due to a problem
-with the serial driver of 2.0.3x kernels. I don't know yet if the problem
-still exists with 2.1.x kernels, as I have heard that the serial driver
-code has been changed with 2.1.x.
-
-When shutting down the sp interface with ifconfig, the kernel crashes if
-there is still an AX.25 connection left over which an IP connection was
-running, even if that IP connection is already closed. The problem does not
-occur when there is a bare AX.25 connection still running. I don't know if
-this is a problem of the 6pack driver or something else in the kernel.
-
-The driver has been tested as a module, not yet as a kernel-builtin driver.
-
-The 6pack protocol supports daisy-chaining of TNCs in a token ring, which is
-connected to one serial port of the PC. This feature is not implemented
-and at least at the moment I won't be able to do it because I do not have
-the opportunity to build a TNC daisy-chain and test it.
-
-Some of the comments in the source code are inaccurate. They are left from
-the SLIP/KISS driver, from which the 6pack driver has been derived.
-I haven't modified or removed them yet -- sorry! The code itself needs
-some cleaning and optimizing. This will be done in a later release.
-
-If you encounter a bug or if you have a question or suggestion concerning the
-driver, feel free to mail me, using the addresses given at the beginning of
-this file.
-
-Have fun!
-
-Andreas
diff --git a/Documentation/networking/altera_tse.rst b/Documentation/networking/altera_tse.rst
new file mode 100644
index 000000000000..7a7040072e58
--- /dev/null
+++ b/Documentation/networking/altera_tse.rst
@@ -0,0 +1,286 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+=======================================
+Altera Triple-Speed Ethernet MAC driver
+=======================================
+
+Copyright |copy| 2008-2014 Altera Corporation
+
+This is the driver for the Altera Triple-Speed Ethernet (TSE) controllers
+using the SGDMA and MSGDMA soft DMA IP components. The driver uses the
+platform bus to obtain component resources. The designs used to test this
+driver were built for a Cyclone(R) V SOC FPGA board, a Cyclone(R) V FPGA board,
+and tested with ARM and NIOS processor hosts separately. The anticipated use
+cases are simple communications between an embedded system and an external peer
+for status and simple configuration of the embedded system.
+
+For more information visit www.altera.com and www.rocketboards.org. Support
+forums for the driver may be found on www.rocketboards.org, and a design used
+to test this driver may be found there as well. Support is also available from
+the maintainer of this driver, found in MAINTAINERS.
+
+The Triple-Speed Ethernet, SGDMA, and MSGDMA components are all soft IP
+components that can be assembled and built into an FPGA using the Altera
+Quartus toolchain. Quartus 13.1 and 14.0 were used to build the design that
+this driver was tested against. The sopc2dts tool is used to create the
+device tree for the driver, and may be found at rocketboards.org.
+
+The driver probe function examines the device tree and determines if the
+Triple-Speed Ethernet instance is using an SGDMA or MSGDMA component. The
+probe function then installs the appropriate set of DMA routines to
+initialize, setup transmits, receives, and interrupt handling primitives for
+the respective configurations.
+
+The SGDMA component is to be deprecated in the near future (over the next 1-2
+years as of this writing in early 2014) in favor of the MSGDMA component.
+SGDMA support is included for existing designs and reference in case a
+developer wishes to support their own soft DMA logic and driver support. Any
+new designs should not use the SGDMA.
+
+The SGDMA supports only a single transmit or receive operation at a time, and
+therefore will not perform as well compared to the MSGDMA soft IP. Please
+visit www.altera.com for known, documented SGDMA errata.
+
+Scatter-gather DMA is not supported by the SGDMA or MSGDMA at this time.
+Scatter-gather DMA will be added to a future maintenance update to this
+driver.
+
+Jumbo frames are not supported at this time.
+
+The driver limits PHY operations to 10/100Mbps, and has not yet been fully
+tested for 1Gbps. This support will be added in a future maintenance update.
+
+1. Kernel Configuration
+=======================
+
+The kernel configuration option is ALTERA_TSE:
+
+ Device Drivers ---> Network device support ---> Ethernet driver support --->
+ Altera Triple-Speed Ethernet MAC support (ALTERA_TSE)
+
+2. Driver parameters list
+=========================
+
+	- debug: message level (0: no output, 16: all);
+	- dma_rx_num: Number of descriptors in the RX list (default is 64);
+	- dma_tx_num: Number of descriptors in the TX list (default is 64).
+
+3. Command line options
+=======================
+
+Driver parameters can be also passed in command line by using::
+
+	altera_tse=dma_rx_num:128,dma_tx_num:512
+
+4. Driver information and notes
+===============================
+
+4.1. Transmit process
+---------------------
+When the driver's transmit routine is called by the kernel, it sets up a
+transmit descriptor by calling the underlying DMA transmit routine (SGDMA or
+MSGDMA), and initiates a transmit operation. Once the transmit is complete, an
+interrupt is driven by the transmit DMA logic. The driver handles the transmit
+completion in the context of the interrupt handling chain by recycling
+resource required to send and track the requested transmit operation.
+
+4.2. Receive process
+--------------------
+The driver will post receive buffers to the receive DMA logic during driver
+initialization. Receive buffers may or may not be queued depending upon the
+underlying DMA logic (MSGDMA is able queue receive buffers, SGDMA is not able
+to queue receive buffers to the SGDMA receive logic). When a packet is
+received, the DMA logic generates an interrupt. The driver handles a receive
+interrupt by obtaining the DMA receive logic status, reaping receive
+completions until no more receive completions are available.
+
+4.3. Interrupt Mitigation
+-------------------------
+The driver is able to mitigate the number of its DMA interrupts
+using NAPI for receive operations. Interrupt mitigation is not yet supported
+for transmit operations, but will be added in a future maintenance release.
+
+4.4) Ethtool support
+--------------------
+Ethtool is supported. Driver statistics and internal errors can be taken using:
+ethtool -S ethX command. It is possible to dump registers etc.
+
+4.5) PHY Support
+----------------
+The driver is compatible with PAL to work with PHY and GPHY devices.
+
+4.7) List of source files:
+--------------------------
+ - Kconfig
+ - Makefile
+ - altera_tse_main.c: main network device driver
+ - altera_tse_ethtool.c: ethtool support
+ - altera_tse.h: private driver structure and common definitions
+ - altera_msgdma.h: MSGDMA implementation function definitions
+ - altera_sgdma.h: SGDMA implementation function definitions
+ - altera_msgdma.c: MSGDMA implementation
+ - altera_sgdma.c: SGDMA implementation
+ - altera_sgdmahw.h: SGDMA register and descriptor definitions
+ - altera_msgdmahw.h: MSGDMA register and descriptor definitions
+ - altera_utils.c: Driver utility functions
+ - altera_utils.h: Driver utility function definitions
+
+5. Debug Information
+====================
+
+The driver exports debug information such as internal statistics,
+debug information, MAC and DMA registers etc.
+
+A user may use the ethtool support to get statistics:
+e.g. using: ethtool -S ethX (that shows the statistics counters)
+or sees the MAC registers: e.g. using: ethtool -d ethX
+
+The developer can also use the "debug" module parameter to get
+further debug information.
+
+6. Statistics Support
+=====================
+
+The controller and driver support a mix of IEEE standard defined statistics,
+RFC defined statistics, and driver or Altera defined statistics. The four
+specifications containing the standard definitions for these statistics are
+as follows:
+
+ - IEEE 802.3-2012 - IEEE Standard for Ethernet.
+ - RFC 2863 found at http://www.rfc-editor.org/rfc/rfc2863.txt.
+ - RFC 2819 found at http://www.rfc-editor.org/rfc/rfc2819.txt.
+ - Altera Triple Speed Ethernet User Guide, found at http://www.altera.com
+
+The statistics supported by the TSE and the device driver are as follows:
+
+"tx_packets" is equivalent to aFramesTransmittedOK defined in IEEE 802.3-2012,
+Section 5.2.2.1.2. This statistics is the count of frames that are successfully
+transmitted.
+
+"rx_packets" is equivalent to aFramesReceivedOK defined in IEEE 802.3-2012,
+Section 5.2.2.1.5. This statistic is the count of frames that are successfully
+received. This count does not include any error packets such as CRC errors,
+length errors, or alignment errors.
+
+"rx_crc_errors" is equivalent to aFrameCheckSequenceErrors defined in IEEE
+802.3-2012, Section 5.2.2.1.6. This statistic is the count of frames that are
+an integral number of bytes in length and do not pass the CRC test as the frame
+is received.
+
+"rx_align_errors" is equivalent to aAlignmentErrors defined in IEEE 802.3-2012,
+Section 5.2.2.1.7. This statistic is the count of frames that are not an
+integral number of bytes in length and do not pass the CRC test as the frame is
+received.
+
+"tx_bytes" is equivalent to aOctetsTransmittedOK defined in IEEE 802.3-2012,
+Section 5.2.2.1.8. This statistic is the count of data and pad bytes
+successfully transmitted from the interface.
+
+"rx_bytes" is equivalent to aOctetsReceivedOK defined in IEEE 802.3-2012,
+Section 5.2.2.1.14. This statistic is the count of data and pad bytes
+successfully received by the controller.
+
+"tx_pause" is equivalent to aPAUSEMACCtrlFramesTransmitted defined in IEEE
+802.3-2012, Section 30.3.4.2. This statistic is a count of PAUSE frames
+transmitted from the network controller.
+
+"rx_pause" is equivalent to aPAUSEMACCtrlFramesReceived defined in IEEE
+802.3-2012, Section 30.3.4.3. This statistic is a count of PAUSE frames
+received by the network controller.
+
+"rx_errors" is equivalent to ifInErrors defined in RFC 2863. This statistic is
+a count of the number of packets received containing errors that prevented the
+packet from being delivered to a higher level protocol.
+
+"tx_errors" is equivalent to ifOutErrors defined in RFC 2863. This statistic
+is a count of the number of packets that could not be transmitted due to errors.
+
+"rx_unicast" is equivalent to ifInUcastPkts defined in RFC 2863. This
+statistic is a count of the number of packets received that were not addressed
+to the broadcast address or a multicast group.
+
+"rx_multicast" is equivalent to ifInMulticastPkts defined in RFC 2863. This
+statistic is a count of the number of packets received that were addressed to
+a multicast address group.
+
+"rx_broadcast" is equivalent to ifInBroadcastPkts defined in RFC 2863. This
+statistic is a count of the number of packets received that were addressed to
+the broadcast address.
+
+"tx_discards" is equivalent to ifOutDiscards defined in RFC 2863. This
+statistic is the number of outbound packets not transmitted even though an
+error was not detected. An example of a reason this might occur is to free up
+internal buffer space.
+
+"tx_unicast" is equivalent to ifOutUcastPkts defined in RFC 2863. This
+statistic counts the number of packets transmitted that were not addressed to
+a multicast group or broadcast address.
+
+"tx_multicast" is equivalent to ifOutMulticastPkts defined in RFC 2863. This
+statistic counts the number of packets transmitted that were addressed to a
+multicast group.
+
+"tx_broadcast" is equivalent to ifOutBroadcastPkts defined in RFC 2863. This
+statistic counts the number of packets transmitted that were addressed to a
+broadcast address.
+
+"ether_drops" is equivalent to etherStatsDropEvents defined in RFC 2819.
+This statistic counts the number of packets dropped due to lack of internal
+controller resources.
+
+"rx_total_bytes" is equivalent to etherStatsOctets defined in RFC 2819.
+This statistic counts the total number of bytes received by the controller,
+including error and discarded packets.
+
+"rx_total_packets" is equivalent to etherStatsPkts defined in RFC 2819.
+This statistic counts the total number of packets received by the controller,
+including error, discarded, unicast, multicast, and broadcast packets.
+
+"rx_undersize" is equivalent to etherStatsUndersizePkts defined in RFC 2819.
+This statistic counts the number of correctly formed packets received less
+than 64 bytes long.
+
+"rx_oversize" is equivalent to etherStatsOversizePkts defined in RFC 2819.
+This statistic counts the number of correctly formed packets greater than 1518
+bytes long.
+
+"rx_64_bytes" is equivalent to etherStatsPkts64Octets defined in RFC 2819.
+This statistic counts the total number of packets received that were 64 octets
+in length.
+
+"rx_65_127_bytes" is equivalent to etherStatsPkts65to127Octets defined in RFC
+2819. This statistic counts the total number of packets received that were
+between 65 and 127 octets in length inclusive.
+
+"rx_128_255_bytes" is equivalent to etherStatsPkts128to255Octets defined in
+RFC 2819. This statistic is the total number of packets received that were
+between 128 and 255 octets in length inclusive.
+
+"rx_256_511_bytes" is equivalent to etherStatsPkts256to511Octets defined in
+RFC 2819. This statistic is the total number of packets received that were
+between 256 and 511 octets in length inclusive.
+
+"rx_512_1023_bytes" is equivalent to etherStatsPkts512to1023Octets defined in
+RFC 2819. This statistic is the total number of packets received that were
+between 512 and 1023 octets in length inclusive.
+
+"rx_1024_1518_bytes" is equivalent to etherStatsPkts1024to1518Octets define
+in RFC 2819. This statistic is the total number of packets received that were
+between 1024 and 1518 octets in length inclusive.
+
+"rx_gte_1519_bytes" is a statistic defined specific to the behavior of the
+Altera TSE. This statistics counts the number of received good and errored
+frames between the length of 1519 and the maximum frame length configured
+in the frm_length register. See the Altera TSE User Guide for More details.
+
+"rx_jabbers" is equivalent to etherStatsJabbers defined in RFC 2819. This
+statistic is the total number of packets received that were longer than 1518
+octets, and had either a bad CRC with an integral number of octets (CRC Error)
+or a bad CRC with a non-integral number of octets (Alignment Error).
+
+"rx_runts" is equivalent to etherStatsFragments defined in RFC 2819. This
+statistic is the total number of packets received that were less than 64 octets
+in length and had either a bad CRC with an integral number of octets (CRC
+error) or a bad CRC with a non-integral number of octets (Alignment Error).
diff --git a/Documentation/networking/altera_tse.txt b/Documentation/networking/altera_tse.txt
deleted file mode 100644
index 50b8589d12fd..000000000000
--- a/Documentation/networking/altera_tse.txt
+++ /dev/null
@@ -1,263 +0,0 @@
-       Altera Triple-Speed Ethernet MAC driver
-
-Copyright (C) 2008-2014 Altera Corporation
-
-This is the driver for the Altera Triple-Speed Ethernet (TSE) controllers
-using the SGDMA and MSGDMA soft DMA IP components. The driver uses the
-platform bus to obtain component resources. The designs used to test this
-driver were built for a Cyclone(R) V SOC FPGA board, a Cyclone(R) V FPGA board,
-and tested with ARM and NIOS processor hosts separately. The anticipated use
-cases are simple communications between an embedded system and an external peer
-for status and simple configuration of the embedded system.
-
-For more information visit www.altera.com and www.rocketboards.org. Support
-forums for the driver may be found on www.rocketboards.org, and a design used
-to test this driver may be found there as well. Support is also available from
-the maintainer of this driver, found in MAINTAINERS.
-
-The Triple-Speed Ethernet, SGDMA, and MSGDMA components are all soft IP
-components that can be assembled and built into an FPGA using the Altera
-Quartus toolchain. Quartus 13.1 and 14.0 were used to build the design that
-this driver was tested against. The sopc2dts tool is used to create the
-device tree for the driver, and may be found at rocketboards.org.
-
-The driver probe function examines the device tree and determines if the
-Triple-Speed Ethernet instance is using an SGDMA or MSGDMA component. The
-probe function then installs the appropriate set of DMA routines to
-initialize, setup transmits, receives, and interrupt handling primitives for
-the respective configurations.
-
-The SGDMA component is to be deprecated in the near future (over the next 1-2
-years as of this writing in early 2014) in favor of the MSGDMA component.
-SGDMA support is included for existing designs and reference in case a
-developer wishes to support their own soft DMA logic and driver support. Any
-new designs should not use the SGDMA.
-
-The SGDMA supports only a single transmit or receive operation at a time, and
-therefore will not perform as well compared to the MSGDMA soft IP. Please
-visit www.altera.com for known, documented SGDMA errata.
-
-Scatter-gather DMA is not supported by the SGDMA or MSGDMA at this time.
-Scatter-gather DMA will be added to a future maintenance update to this
-driver.
-
-Jumbo frames are not supported at this time.
-
-The driver limits PHY operations to 10/100Mbps, and has not yet been fully
-tested for 1Gbps. This support will be added in a future maintenance update.
-
-1) Kernel Configuration
-The kernel configuration option is ALTERA_TSE:
- Device Drivers ---> Network device support ---> Ethernet driver support --->
- Altera Triple-Speed Ethernet MAC support (ALTERA_TSE)
-
-2) Driver parameters list:
-	debug: message level (0: no output, 16: all);
-	dma_rx_num: Number of descriptors in the RX list (default is 64);
-	dma_tx_num: Number of descriptors in the TX list (default is 64).
-
-3) Command line options
-Driver parameters can be also passed in command line by using:
-	altera_tse=dma_rx_num:128,dma_tx_num:512
-
-4) Driver information and notes
-
-4.1) Transmit process
-When the driver's transmit routine is called by the kernel, it sets up a
-transmit descriptor by calling the underlying DMA transmit routine (SGDMA or
-MSGDMA), and initiates a transmit operation. Once the transmit is complete, an
-interrupt is driven by the transmit DMA logic. The driver handles the transmit
-completion in the context of the interrupt handling chain by recycling
-resource required to send and track the requested transmit operation.
-
-4.2) Receive process
-The driver will post receive buffers to the receive DMA logic during driver
-initialization. Receive buffers may or may not be queued depending upon the
-underlying DMA logic (MSGDMA is able queue receive buffers, SGDMA is not able
-to queue receive buffers to the SGDMA receive logic). When a packet is
-received, the DMA logic generates an interrupt. The driver handles a receive
-interrupt by obtaining the DMA receive logic status, reaping receive
-completions until no more receive completions are available.
-
-4.3) Interrupt Mitigation
-The driver is able to mitigate the number of its DMA interrupts
-using NAPI for receive operations. Interrupt mitigation is not yet supported
-for transmit operations, but will be added in a future maintenance release.
-
-4.4) Ethtool support
-Ethtool is supported. Driver statistics and internal errors can be taken using:
-ethtool -S ethX command. It is possible to dump registers etc.
-
-4.5) PHY Support
-The driver is compatible with PAL to work with PHY and GPHY devices.
-
-4.7) List of source files:
- o Kconfig
- o Makefile
- o altera_tse_main.c: main network device driver
- o altera_tse_ethtool.c: ethtool support
- o altera_tse.h: private driver structure and common definitions
- o altera_msgdma.h: MSGDMA implementation function definitions
- o altera_sgdma.h: SGDMA implementation function definitions
- o altera_msgdma.c: MSGDMA implementation
- o altera_sgdma.c: SGDMA implementation
- o altera_sgdmahw.h: SGDMA register and descriptor definitions
- o altera_msgdmahw.h: MSGDMA register and descriptor definitions
- o altera_utils.c: Driver utility functions
- o altera_utils.h: Driver utility function definitions
-
-5) Debug Information
-
-The driver exports debug information such as internal statistics,
-debug information, MAC and DMA registers etc.
-
-A user may use the ethtool support to get statistics:
-e.g. using: ethtool -S ethX (that shows the statistics counters)
-or sees the MAC registers: e.g. using: ethtool -d ethX
-
-The developer can also use the "debug" module parameter to get
-further debug information.
-
-6) Statistics Support
-
-The controller and driver support a mix of IEEE standard defined statistics,
-RFC defined statistics, and driver or Altera defined statistics. The four
-specifications containing the standard definitions for these statistics are
-as follows:
-
- o IEEE 802.3-2012 - IEEE Standard for Ethernet.
- o RFC 2863 found at http://www.rfc-editor.org/rfc/rfc2863.txt.
- o RFC 2819 found at http://www.rfc-editor.org/rfc/rfc2819.txt.
- o Altera Triple Speed Ethernet User Guide, found at http://www.altera.com
-
-The statistics supported by the TSE and the device driver are as follows:
-
-"tx_packets" is equivalent to aFramesTransmittedOK defined in IEEE 802.3-2012,
-Section 5.2.2.1.2. This statistics is the count of frames that are successfully
-transmitted.
-
-"rx_packets" is equivalent to aFramesReceivedOK defined in IEEE 802.3-2012,
-Section 5.2.2.1.5. This statistic is the count of frames that are successfully
-received. This count does not include any error packets such as CRC errors,
-length errors, or alignment errors.
-
-"rx_crc_errors" is equivalent to aFrameCheckSequenceErrors defined in IEEE
-802.3-2012, Section 5.2.2.1.6. This statistic is the count of frames that are
-an integral number of bytes in length and do not pass the CRC test as the frame
-is received.
-
-"rx_align_errors" is equivalent to aAlignmentErrors defined in IEEE 802.3-2012,
-Section 5.2.2.1.7. This statistic is the count of frames that are not an
-integral number of bytes in length and do not pass the CRC test as the frame is
-received.
-
-"tx_bytes" is equivalent to aOctetsTransmittedOK defined in IEEE 802.3-2012,
-Section 5.2.2.1.8. This statistic is the count of data and pad bytes
-successfully transmitted from the interface.
-
-"rx_bytes" is equivalent to aOctetsReceivedOK defined in IEEE 802.3-2012,
-Section 5.2.2.1.14. This statistic is the count of data and pad bytes
-successfully received by the controller.
-
-"tx_pause" is equivalent to aPAUSEMACCtrlFramesTransmitted defined in IEEE
-802.3-2012, Section 30.3.4.2. This statistic is a count of PAUSE frames
-transmitted from the network controller.
-
-"rx_pause" is equivalent to aPAUSEMACCtrlFramesReceived defined in IEEE
-802.3-2012, Section 30.3.4.3. This statistic is a count of PAUSE frames
-received by the network controller.
-
-"rx_errors" is equivalent to ifInErrors defined in RFC 2863. This statistic is
-a count of the number of packets received containing errors that prevented the
-packet from being delivered to a higher level protocol.
-
-"tx_errors" is equivalent to ifOutErrors defined in RFC 2863. This statistic
-is a count of the number of packets that could not be transmitted due to errors.
-
-"rx_unicast" is equivalent to ifInUcastPkts defined in RFC 2863. This
-statistic is a count of the number of packets received that were not addressed
-to the broadcast address or a multicast group.
-
-"rx_multicast" is equivalent to ifInMulticastPkts defined in RFC 2863. This
-statistic is a count of the number of packets received that were addressed to
-a multicast address group.
-
-"rx_broadcast" is equivalent to ifInBroadcastPkts defined in RFC 2863. This
-statistic is a count of the number of packets received that were addressed to
-the broadcast address.
-
-"tx_discards" is equivalent to ifOutDiscards defined in RFC 2863. This
-statistic is the number of outbound packets not transmitted even though an
-error was not detected. An example of a reason this might occur is to free up
-internal buffer space.
-
-"tx_unicast" is equivalent to ifOutUcastPkts defined in RFC 2863. This
-statistic counts the number of packets transmitted that were not addressed to
-a multicast group or broadcast address.
-
-"tx_multicast" is equivalent to ifOutMulticastPkts defined in RFC 2863. This
-statistic counts the number of packets transmitted that were addressed to a
-multicast group.
-
-"tx_broadcast" is equivalent to ifOutBroadcastPkts defined in RFC 2863. This
-statistic counts the number of packets transmitted that were addressed to a
-broadcast address.
-
-"ether_drops" is equivalent to etherStatsDropEvents defined in RFC 2819.
-This statistic counts the number of packets dropped due to lack of internal
-controller resources.
-
-"rx_total_bytes" is equivalent to etherStatsOctets defined in RFC 2819.
-This statistic counts the total number of bytes received by the controller,
-including error and discarded packets.
-
-"rx_total_packets" is equivalent to etherStatsPkts defined in RFC 2819.
-This statistic counts the total number of packets received by the controller,
-including error, discarded, unicast, multicast, and broadcast packets.
-
-"rx_undersize" is equivalent to etherStatsUndersizePkts defined in RFC 2819.
-This statistic counts the number of correctly formed packets received less
-than 64 bytes long.
-
-"rx_oversize" is equivalent to etherStatsOversizePkts defined in RFC 2819.
-This statistic counts the number of correctly formed packets greater than 1518
-bytes long.
-
-"rx_64_bytes" is equivalent to etherStatsPkts64Octets defined in RFC 2819.
-This statistic counts the total number of packets received that were 64 octets
-in length.
-
-"rx_65_127_bytes" is equivalent to etherStatsPkts65to127Octets defined in RFC
-2819. This statistic counts the total number of packets received that were
-between 65 and 127 octets in length inclusive.
-
-"rx_128_255_bytes" is equivalent to etherStatsPkts128to255Octets defined in
-RFC 2819. This statistic is the total number of packets received that were
-between 128 and 255 octets in length inclusive.
-
-"rx_256_511_bytes" is equivalent to etherStatsPkts256to511Octets defined in
-RFC 2819. This statistic is the total number of packets received that were
-between 256 and 511 octets in length inclusive.
-
-"rx_512_1023_bytes" is equivalent to etherStatsPkts512to1023Octets defined in
-RFC 2819. This statistic is the total number of packets received that were
-between 512 and 1023 octets in length inclusive.
-
-"rx_1024_1518_bytes" is equivalent to etherStatsPkts1024to1518Octets define
-in RFC 2819. This statistic is the total number of packets received that were
-between 1024 and 1518 octets in length inclusive.
-
-"rx_gte_1519_bytes" is a statistic defined specific to the behavior of the
-Altera TSE. This statistics counts the number of received good and errored
-frames between the length of 1519 and the maximum frame length configured
-in the frm_length register. See the Altera TSE User Guide for More details.
-
-"rx_jabbers" is equivalent to etherStatsJabbers defined in RFC 2819. This
-statistic is the total number of packets received that were longer than 1518
-octets, and had either a bad CRC with an integral number of octets (CRC Error)
-or a bad CRC with a non-integral number of octets (Alignment Error).
-
-"rx_runts" is equivalent to etherStatsFragments defined in RFC 2819. This
-statistic is the total number of packets received that were less than 64 octets
-in length and had either a bad CRC with an integral number of octets (CRC
-error) or a bad CRC with a non-integral number of octets (Alignment Error).
diff --git a/Documentation/networking/arcnet-hardware.rst b/Documentation/networking/arcnet-hardware.rst
new file mode 100644
index 000000000000..b5a1a020c824
--- /dev/null
+++ b/Documentation/networking/arcnet-hardware.rst
@@ -0,0 +1,3234 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+ARCnet Hardware
+===============
+
+.. note::
+
+   1) This file is a supplement to arcnet.txt.  Please read that for general
+      driver configuration help.
+   2) This file is no longer Linux-specific.  It should probably be moved out
+      of the kernel sources.  Ideas?
+
+Because so many people (myself included) seem to have obtained ARCnet cards
+without manuals, this file contains a quick introduction to ARCnet hardware,
+some cabling tips, and a listing of all jumper settings I can find. Please
+e-mail apenwarr@worldvisions.ca with any settings for your particular card,
+or any other information you have!
+
+
+Introduction to ARCnet
+======================
+
+ARCnet is a network type which works in a way similar to popular Ethernet
+networks but which is also different in some very important ways.
+
+First of all, you can get ARCnet cards in at least two speeds: 2.5 Mbps
+(slower than Ethernet) and 100 Mbps (faster than normal Ethernet).  In fact,
+there are others as well, but these are less common.  The different hardware
+types, as far as I'm aware, are not compatible and so you cannot wire a
+100 Mbps card to a 2.5 Mbps card, and so on.  From what I hear, my driver does
+work with 100 Mbps cards, but I haven't been able to verify this myself,
+since I only have the 2.5 Mbps variety.  It is probably not going to saturate
+your 100 Mbps card.  Stop complaining. :)
+
+You also cannot connect an ARCnet card to any kind of Ethernet card and
+expect it to work.
+
+There are two "types" of ARCnet - STAR topology and BUS topology.  This
+refers to how the cards are meant to be wired together.  According to most
+available documentation, you can only connect STAR cards to STAR cards and
+BUS cards to BUS cards.  That makes sense, right?  Well, it's not quite
+true; see below under "Cabling."
+
+Once you get past these little stumbling blocks, ARCnet is actually quite a
+well-designed standard.  It uses something called "modified token passing"
+which makes it completely incompatible with so-called "Token Ring" cards,
+but which makes transfers much more reliable than Ethernet does.  In fact,
+ARCnet will guarantee that a packet arrives safely at the destination, and
+even if it can't possibly be delivered properly (ie. because of a cable
+break, or because the destination computer does not exist) it will at least
+tell the sender about it.
+
+Because of the carefully defined action of the "token", it will always make
+a pass around the "ring" within a maximum length of time.  This makes it
+useful for realtime networks.
+
+In addition, all known ARCnet cards have an (almost) identical programming
+interface.  This means that with one ARCnet driver you can support any
+card, whereas with Ethernet each manufacturer uses what is sometimes a
+completely different programming interface, leading to a lot of different,
+sometimes very similar, Ethernet drivers.  Of course, always using the same
+programming interface also means that when high-performance hardware
+facilities like PCI bus mastering DMA appear, it's hard to take advantage of
+them.  Let's not go into that.
+
+One thing that makes ARCnet cards difficult to program for, however, is the
+limit on their packet sizes; standard ARCnet can only send packets that are
+up to 508 bytes in length.  This is smaller than the Internet "bare minimum"
+of 576 bytes, let alone the Ethernet MTU of 1500.  To compensate, an extra
+level of encapsulation is defined by RFC1201, which I call "packet
+splitting," that allows "virtual packets" to grow as large as 64K each,
+although they are generally kept down to the Ethernet-style 1500 bytes.
+
+For more information on the advantages and disadvantages (mostly the
+advantages) of ARCnet networks, you might try the "ARCnet Trade Association"
+WWW page:
+
+	http://www.arcnet.com
+
+
+Cabling ARCnet Networks
+=======================
+
+This section was rewritten by
+
+	Vojtech Pavlik     <vojtech@suse.cz>
+
+using information from several people, including:
+
+	- Avery Pennraun     <apenwarr@worldvisions.ca>
+	- Stephen A. Wood    <saw@hallc1.cebaf.gov>
+	- John Paul Morrison <jmorriso@bogomips.ee.ubc.ca>
+	- Joachim Koenig     <jojo@repas.de>
+
+and Avery touched it up a bit, at Vojtech's request.
+
+ARCnet (the classic 2.5 Mbps version) can be connected by two different
+types of cabling: coax and twisted pair.  The other ARCnet-type networks
+(100 Mbps TCNS and 320 kbps - 32 Mbps ARCnet Plus) use different types of
+cabling (Type1, Fiber, C1, C4, C5).
+
+For a coax network, you "should" use 93 Ohm RG-62 cable.  But other cables
+also work fine, because ARCnet is a very stable network. I personally use 75
+Ohm TV antenna cable.
+
+Cards for coax cabling are shipped in two different variants: for BUS and
+STAR network topologies.  They are mostly the same.  The only difference
+lies in the hybrid chip installed.  BUS cards use high impedance output,
+while STAR use low impedance.  Low impedance card (STAR) is electrically
+equal to a high impedance one with a terminator installed.
+
+Usually, the ARCnet networks are built up from STAR cards and hubs.  There
+are two types of hubs - active and passive.  Passive hubs are small boxes
+with four BNC connectors containing four 47 Ohm resistors::
+
+	   |         | wires
+	   R         + junction
+	-R-+-R-      R 47 Ohm resistors
+	   R
+	   |
+
+The shielding is connected together.  Active hubs are much more complicated;
+they are powered and contain electronics to amplify the signal and send it
+to other segments of the net.  They usually have eight connectors.  Active
+hubs come in two variants - dumb and smart.  The dumb variant just
+amplifies, but the smart one decodes to digital and encodes back all packets
+coming through.  This is much better if you have several hubs in the net,
+since many dumb active hubs may worsen the signal quality.
+
+And now to the cabling.  What you can connect together:
+
+1. A card to a card.  This is the simplest way of creating a 2-computer
+   network.
+
+2. A card to a passive hub.  Remember that all unused connectors on the hub
+   must be properly terminated with 93 Ohm (or something else if you don't
+   have the right ones) terminators.
+
+	(Avery's note: oops, I didn't know that.  Mine (TV cable) works
+	anyway, though.)
+
+3. A card to an active hub.  Here is no need to terminate the unused
+   connectors except some kind of aesthetic feeling.  But, there may not be
+   more than eleven active hubs between any two computers.  That of course
+   doesn't limit the number of active hubs on the network.
+
+4. An active hub to another.
+
+5. An active hub to passive hub.
+
+Remember that you cannot connect two passive hubs together.  The power loss
+implied by such a connection is too high for the net to operate reliably.
+
+An example of a typical ARCnet network::
+
+	   R                     S - STAR type card
+    S------H--------A-------S    R - Terminator
+	   |        |            H - Hub
+	   |        |            A - Active hub
+	   |   S----H----S
+	   S        |
+		    |
+		    S
+
+The BUS topology is very similar to the one used by Ethernet.  The only
+difference is in cable and terminators: they should be 93 Ohm.  Ethernet
+uses 50 Ohm impedance. You use T connectors to put the computers on a single
+line of cable, the bus. You have to put terminators at both ends of the
+cable. A typical BUS ARCnet network looks like::
+
+    RT----T------T------T------T------TR
+     B    B      B      B      B      B
+
+  B - BUS type card
+  R - Terminator
+  T - T connector
+
+But that is not all! The two types can be connected together.  According to
+the official documentation the only way of connecting them is using an active
+hub::
+
+	 A------T------T------TR
+	 |      B      B      B
+     S---H---S
+	 |
+	 S
+
+The official docs also state that you can use STAR cards at the ends of
+BUS network in place of a BUS card and a terminator::
+
+     S------T------T------S
+	    B      B
+
+But, according to my own experiments, you can simply hang a BUS type card
+anywhere in middle of a cable in a STAR topology network.  And more - you
+can use the bus card in place of any star card if you use a terminator. Then
+you can build very complicated networks fulfilling all your needs!  An
+example::
+
+				  S
+				  |
+	   RT------T-------T------H------S
+	    B      B       B      |
+				  |       R
+    S------A------T-------T-------A-------H------TR
+	   |      B       B       |       |      B
+	   |   S                 BT       |
+	   |   |                  |  S----A-----S
+    S------H---A----S             |       |
+	   |   |      S------T----H---S   |
+	   S   S             B    R       S
+
+A basically different cabling scheme is used with Twisted Pair cabling. Each
+of the TP cards has two RJ (phone-cord style) connectors.  The cards are
+then daisy-chained together using a cable connecting every two neighboring
+cards.  The ends are terminated with RJ 93 Ohm terminators which plug into
+the empty connectors of cards on the ends of the chain.  An example::
+
+	  ___________   ___________
+      _R_|_         _|_|_         _|_R_
+     |     |       |     |       |     |
+     |Card |       |Card |       |Card |
+     |_____|       |_____|       |_____|
+
+
+There are also hubs for the TP topology.  There is nothing difficult
+involved in using them; you just connect a TP chain to a hub on any end or
+even at both.  This way you can create almost any network configuration.
+The maximum of 11 hubs between any two computers on the net applies here as
+well.  An example::
+
+    RP-------P--------P--------H-----P------P-----PR
+			       |
+      RP-----H--------P--------H-----P------PR
+	     |                 |
+	     PR                PR
+
+    R - RJ Terminator
+    P - TP Card
+    H - TP Hub
+
+Like any network, ARCnet has a limited cable length.  These are the maximum
+cable lengths between two active ends (an active end being an active hub or
+a STAR card).
+
+		========== ======= ===========
+		RG-62       93 Ohm up to 650 m
+		RG-59/U     75 Ohm up to 457 m
+		RG-11/U     75 Ohm up to 533 m
+		IBM Type 1 150 Ohm up to 200 m
+		IBM Type 3 100 Ohm up to 100 m
+		========== ======= ===========
+
+The maximum length of all cables connected to a passive hub is limited to 65
+meters for RG-62 cabling; less for others.  You can see that using passive
+hubs in a large network is a bad idea. The maximum length of a single "BUS
+Trunk" is about 300 meters for RG-62. The maximum distance between the two
+most distant points of the net is limited to 3000 meters. The maximum length
+of a TP cable between two cards/hubs is 650 meters.
+
+
+Setting the Jumpers
+===================
+
+All ARCnet cards should have a total of four or five different settings:
+
+  - the I/O address:  this is the "port" your ARCnet card is on.  Probed
+    values in the Linux ARCnet driver are only from 0x200 through 0x3F0. (If
+    your card has additional ones, which is possible, please tell me.) This
+    should not be the same as any other device on your system.  According to
+    a doc I got from Novell, MS Windows prefers values of 0x300 or more,
+    eating net connections on my system (at least) otherwise.  My guess is
+    this may be because, if your card is at 0x2E0, probing for a serial port
+    at 0x2E8 will reset the card and probably mess things up royally.
+
+	- Avery's favourite: 0x300.
+
+  - the IRQ: on  8-bit cards, it might be 2 (9), 3, 4, 5, or 7.
+	     on 16-bit cards, it might be 2 (9), 3, 4, 5, 7, or 10-15.
+
+    Make sure this is different from any other card on your system.  Note
+    that IRQ2 is the same as IRQ9, as far as Linux is concerned.  You can
+    "cat /proc/interrupts" for a somewhat complete list of which ones are in
+    use at any given time.  Here is a list of common usages from Vojtech
+    Pavlik <vojtech@suse.cz>:
+
+	("Not on bus" means there is no way for a card to generate this
+	interrupt)
+
+	======   =========================================================
+	IRQ  0   Timer 0 (Not on bus)
+	IRQ  1   Keyboard (Not on bus)
+	IRQ  2   IRQ Controller 2 (Not on bus, nor does interrupt the CPU)
+	IRQ  3   COM2
+	IRQ  4   COM1
+	IRQ  5   FREE (LPT2 if you have it; sometimes COM3; maybe PLIP)
+	IRQ  6   Floppy disk controller
+	IRQ  7   FREE (LPT1 if you don't use the polling driver; PLIP)
+	IRQ  8   Realtime Clock Interrupt (Not on bus)
+	IRQ  9   FREE (VGA vertical sync interrupt if enabled)
+	IRQ 10   FREE
+	IRQ 11   FREE
+	IRQ 12   FREE
+	IRQ 13   Numeric Coprocessor (Not on bus)
+	IRQ 14   Fixed Disk Controller
+	IRQ 15   FREE (Fixed Disk Controller 2 if you have it)
+	======   =========================================================
+
+
+	.. note::
+
+	   IRQ 9 is used on some video cards for the "vertical retrace"
+	   interrupt.  This interrupt would have been handy for things like
+	   video games, as it occurs exactly once per screen refresh, but
+	   unfortunately IBM cancelled this feature starting with the original
+	   VGA and thus many VGA/SVGA cards do not support it.  For this
+	   reason, no modern software uses this interrupt and it can almost
+	   always be safely disabled, if your video card supports it at all.
+
+	If your card for some reason CANNOT disable this IRQ (usually there
+	is a jumper), one solution would be to clip the printed circuit
+	contact on the board: it's the fourth contact from the left on the
+	back side.  I take no responsibility if you try this.
+
+	- Avery's favourite: IRQ2 (actually IRQ9).  Watch that VGA, though.
+
+  - the memory address:  Unlike most cards, ARCnets use "shared memory" for
+    copying buffers around.  Make SURE it doesn't conflict with any other
+    used memory in your system!
+
+    ::
+
+	A0000		- VGA graphics memory (ok if you don't have VGA)
+	B0000		- Monochrome text mode
+	C0000		\  One of these is your VGA BIOS - usually C0000.
+	E0000		/
+	F0000		- System BIOS
+
+    Anything less than 0xA0000 is, well, a BAD idea since it isn't above
+    640k.
+
+	- Avery's favourite: 0xD0000
+
+  - the station address:  Every ARCnet card has its own "unique" network
+    address from 0 to 255.  Unlike Ethernet, you can set this address
+    yourself with a jumper or switch (or on some cards, with special
+    software).  Since it's only 8 bits, you can only have 254 ARCnet cards
+    on a network.  DON'T use 0 or 255, since these are reserved (although
+    neat stuff will probably happen if you DO use them).  By the way, if you
+    haven't already guessed, don't set this the same as any other ARCnet on
+    your network!
+
+	- Avery's favourite:  3 and 4.  Not that it matters.
+
+  - There may be ETS1 and ETS2 settings.  These may or may not make a
+    difference on your card (many manuals call them "reserved"), but are
+    used to change the delays used when powering up a computer on the
+    network.  This is only necessary when wiring VERY long range ARCnet
+    networks, on the order of 4km or so; in any case, the only real
+    requirement here is that all cards on the network with ETS1 and ETS2
+    jumpers have them in the same position.  Chris Hindy <chrish@io.org>
+    sent in a chart with actual values for this:
+
+	======= ======= =============== ====================
+	ET1	ET2	Response Time	Reconfiguration Time
+	======= ======= =============== ====================
+	open	open	74.7us		840us
+	open	closed	283.4us		1680us
+	closed	open	561.8us		1680us
+	closed	closed	1118.6us	1680us
+	======= ======= =============== ====================
+
+    Make sure you set ETS1 and ETS2 to the SAME VALUE for all cards on your
+    network.
+
+Also, on many cards (not mine, though) there are red and green LED's.
+Vojtech Pavlik <vojtech@suse.cz> tells me this is what they mean:
+
+	=============== =============== =====================================
+	GREEN           RED             Status
+	=============== =============== =====================================
+	OFF             OFF             Power off
+	OFF             Short flashes   Cabling problems (broken cable or not
+					terminated)
+	OFF (short)     ON              Card init
+	ON              ON              Normal state - everything OK, nothing
+					happens
+	ON              Long flashes    Data transfer
+	ON              OFF             Never happens (maybe when wrong ID)
+	=============== =============== =====================================
+
+
+The following is all the specific information people have sent me about
+their own particular ARCnet cards.  It is officially a mess, and contains
+huge amounts of duplicated information.  I have no time to fix it.  If you
+want to, PLEASE DO!  Just send me a 'diff -u' of all your changes.
+
+The model # is listed right above specifics for that card, so you should be
+able to use your text viewer's "search" function to find the entry you want.
+If you don't KNOW what kind of card you have, try looking through the
+various diagrams to see if you can tell.
+
+If your model isn't listed and/or has different settings, PLEASE PLEASE
+tell me.  I had to figure mine out without the manual, and it WASN'T FUN!
+
+Even if your ARCnet model isn't listed, but has the same jumpers as another
+model that is, please e-mail me to say so.
+
+Cards Listed in this file (in this order, mostly):
+
+	=============== ======================= ====
+	Manufacturer	Model #			Bits
+	=============== ======================= ====
+	SMC		PC100			8
+	SMC		PC110			8
+	SMC		PC120			8
+	SMC		PC130			8
+	SMC		PC270E			8
+	SMC		PC500			16
+	SMC		PC500Longboard		16
+	SMC		PC550Longboard		16
+	SMC		PC600			16
+	SMC		PC710			8
+	SMC?		LCS-8830(-T)		8/16
+	Puredata	PDI507			8
+	CNet Tech	CN120-Series		8
+	CNet Tech	CN160-Series		16
+	Lantech?	UM9065L chipset		8
+	Acer		5210-003		8
+	Datapoint?	LAN-ARC-8		8
+	Topware		TA-ARC/10		8
+	Thomas-Conrad	500-6242-0097 REV A	8
+	Waterloo?	(C)1985 Waterloo Micro. 8
+	No Name		--			8/16
+	No Name		Taiwan R.O.C?		8
+	No Name		Model 9058		8
+	Tiara		Tiara Lancard?		8
+	=============== ======================= ====
+
+
+* SMC = Standard Microsystems Corp.
+* CNet Tech = CNet Technology, Inc.
+
+Unclassified Stuff
+==================
+
+  - Please send any other information you can find.
+
+  - And some other stuff (more info is welcome!)::
+
+     From: root@ultraworld.xs4all.nl (Timo Hilbrink)
+     To: apenwarr@foxnet.net (Avery Pennarun)
+     Date: Wed, 26 Oct 1994 02:10:32 +0000 (GMT)
+     Reply-To: timoh@xs4all.nl
+
+     [...parts deleted...]
+
+     About the jumpers: On my PC130 there is one more jumper, located near the
+     cable-connector and it's for changing to star or bus topology;
+     closed: star - open: bus
+     On the PC500 are some more jumper-pins, one block labeled with RX,PDN,TXI
+     and another with ALE,LA17,LA18,LA19 these are undocumented..
+
+     [...more parts deleted...]
+
+     --- CUT ---
+
+Standard Microsystems Corp (SMC)
+================================
+
+PC100, PC110, PC120, PC130 (8-bit cards) and PC500, PC600 (16-bit cards)
+------------------------------------------------------------------------
+
+  - mainly from Avery Pennarun <apenwarr@worldvisions.ca>.  Values depicted
+    are from Avery's setup.
+  - special thanks to Timo Hilbrink <timoh@xs4all.nl> for noting that PC120,
+    130, 500, and 600 all have the same switches as Avery's PC100.
+    PC500/600 have several extra, undocumented pins though. (?)
+  - PC110 settings were verified by Stephen A. Wood <saw@cebaf.gov>
+  - Also, the JP- and S-numbers probably don't match your card exactly.  Try
+    to find jumpers/switches with the same number of settings - it's
+    probably more reliable.
+
+::
+
+	     JP5		       [|]    :    :    :    :
+	(IRQ Setting)		      IRQ2  IRQ3 IRQ4 IRQ5 IRQ7
+			Put exactly one jumper on exactly one set of pins.
+
+
+				  1  2   3  4  5  6   7  8  9 10
+	     S1                /----------------------------------\
+	(I/O and Memory        |  1  1 * 0  0  0  0 * 1  1  0  1  |
+	 addresses)            \----------------------------------/
+				  |--|   |--------|   |--------|
+				  (a)       (b)           (m)
+
+			WARNING.  It's very important when setting these which way
+			you're holding the card, and which way you think is '1'!
+
+			If you suspect that your settings are not being made
+			correctly, try reversing the direction or inverting the
+			switch positions.
+
+			a: The first digit of the I/O address.
+				Setting		Value
+				-------		-----
+				00		0
+				01		1
+				10		2
+				11		3
+
+			b: The second digit of the I/O address.
+				Setting		Value
+				-------		-----
+				0000		0
+				0001		1
+				0010		2
+				...		...
+				1110		E
+				1111		F
+
+			The I/O address is in the form ab0.  For example, if
+			a is 0x2 and b is 0xE, the address will be 0x2E0.
+
+			DO NOT SET THIS LESS THAN 0x200!!!!!
+
+
+			m: The first digit of the memory address.
+				Setting		Value
+				-------		-----
+				0000		0
+				0001		1
+				0010		2
+				...		...
+				1110		E
+				1111		F
+
+			The memory address is in the form m0000.  For example, if
+			m is D, the address will be 0xD0000.
+
+			DO NOT SET THIS TO C0000, F0000, OR LESS THAN A0000!
+
+				  1  2  3  4  5  6  7  8
+	     S2                /--------------------------\
+	(Station Address)      |  1  1  0  0  0  0  0  0  |
+			       \--------------------------/
+
+				Setting		Value
+				-------		-----
+				00000000	00
+				10000000	01
+				01000000	02
+				...
+				01111111	FE
+				11111111	FF
+
+			Note that this is binary with the digits reversed!
+
+			DO NOT SET THIS TO 0 OR 255 (0xFF)!
+
+
+PC130E/PC270E (8-bit cards)
+---------------------------
+
+  - from Juergen Seifert <seifert@htwm.de>
+
+This description has been written by Juergen Seifert <seifert@htwm.de>
+using information from the following Original SMC Manual
+
+	     "Configuration Guide for ARCNET(R)-PC130E/PC270 Network
+	     Controller Boards Pub. # 900.044A June, 1989"
+
+ARCNET is a registered trademark of the Datapoint Corporation
+SMC is a registered trademark of the Standard Microsystems Corporation
+
+The PC130E is an enhanced version of the PC130 board, is equipped with a
+standard BNC female connector for connection to RG-62/U coax cable.
+Since this board is designed both for point-to-point connection in star
+networks and for connection to bus networks, it is downwardly compatible
+with all the other standard boards designed for coax networks (that is,
+the PC120, PC110 and PC100 star topology boards and the PC220, PC210 and
+PC200 bus topology boards).
+
+The PC270E is an enhanced version of the PC260 board, is equipped with two
+modular RJ11-type jacks for connection to twisted pair wiring.
+It can be used in a star or a daisy-chained network.
+
+::
+
+	 8 7 6 5 4 3 2 1
+    ________________________________________________________________
+   |   |       S1        |                                          |
+   |   |_________________|                                          |
+   |    Offs|Base |I/O Addr                                         |
+   |     RAM Addr |                                              ___|
+   |         ___  ___                                       CR3 |___|
+   |        |   \/   |                                      CR4 |___|
+   |        |  PROM  |                                           ___|
+   |        |        |                                        N |   | 8
+   |        | SOCKET |                                        o |   | 7
+   |        |________|                                        d |   | 6
+   |                   ___________________                    e |   | 5
+   |                  |                   |                   A | S | 4
+   |       |oo| EXT2  |                   |                   d | 2 | 3
+   |       |oo| EXT1  |       SMC         |                   d |   | 2
+   |       |oo| ROM   |      90C63        |                   r |___| 1
+   |       |oo| IRQ7  |                   |               |o|  _____|
+   |       |oo| IRQ5  |                   |               |o| | J1  |
+   |       |oo| IRQ4  |                   |              STAR |_____|
+   |       |oo| IRQ3  |                   |                   | J2  |
+   |       |oo| IRQ2  |___________________|                   |_____|
+   |___                                               ______________|
+       |                                             |
+       |_____________________________________________|
+
+Legend::
+
+  SMC 90C63	ARCNET Controller / Transceiver /Logic
+  S1	1-3:	I/O Base Address Select
+	4-6:	Memory Base Address Select
+	7-8:	RAM Offset Select
+  S2	1-8:	Node ID Select
+  EXT		Extended Timeout Select
+  ROM		ROM Enable Select
+  STAR		Selected - Star Topology	(PC130E only)
+		Deselected - Bus Topology	(PC130E only)
+  CR3/CR4	Diagnostic LEDs
+  J1		BNC RG62/U Connector		(PC130E only)
+  J1		6-position Telephone Jack	(PC270E only)
+  J2		6-position Telephone Jack	(PC270E only)
+
+Setting one of the switches to Off/Open means "1", On/Closed means "0".
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in group S2 are used to set the node ID.
+These switches work in a way similar to the PC100-series cards; see that
+entry for more information.
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The first three switches in switch group S1 are used to select one
+of eight possible I/O Base addresses using the following table::
+
+
+   Switch | Hex I/O
+   1 2 3  | Address
+   -------|--------
+   0 0 0  |  260
+   0 0 1  |  290
+   0 1 0  |  2E0  (Manufacturer's default)
+   0 1 1  |  2F0
+   1 0 0  |  300
+   1 0 1  |  350
+   1 1 0  |  380
+   1 1 1  |  3E0
+
+
+Setting the Base Memory (RAM) buffer Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The memory buffer requires 2K of a 16K block of RAM. The base of this
+16K block can be located in any of eight positions.
+Switches 4-6 of switch group S1 select the Base of the 16K block.
+Within that 16K address space, the buffer may be assigned any one of four
+positions, determined by the offset, switches 7 and 8 of group S1.
+
+::
+
+   Switch     | Hex RAM | Hex ROM
+   4 5 6  7 8 | Address | Address *)
+   -----------|---------|-----------
+   0 0 0  0 0 |  C0000  |  C2000
+   0 0 0  0 1 |  C0800  |  C2000
+   0 0 0  1 0 |  C1000  |  C2000
+   0 0 0  1 1 |  C1800  |  C2000
+	      |         |
+   0 0 1  0 0 |  C4000  |  C6000
+   0 0 1  0 1 |  C4800  |  C6000
+   0 0 1  1 0 |  C5000  |  C6000
+   0 0 1  1 1 |  C5800  |  C6000
+	      |         |
+   0 1 0  0 0 |  CC000  |  CE000
+   0 1 0  0 1 |  CC800  |  CE000
+   0 1 0  1 0 |  CD000  |  CE000
+   0 1 0  1 1 |  CD800  |  CE000
+	      |         |
+   0 1 1  0 0 |  D0000  |  D2000  (Manufacturer's default)
+   0 1 1  0 1 |  D0800  |  D2000
+   0 1 1  1 0 |  D1000  |  D2000
+   0 1 1  1 1 |  D1800  |  D2000
+	      |         |
+   1 0 0  0 0 |  D4000  |  D6000
+   1 0 0  0 1 |  D4800  |  D6000
+   1 0 0  1 0 |  D5000  |  D6000
+   1 0 0  1 1 |  D5800  |  D6000
+	      |         |
+   1 0 1  0 0 |  D8000  |  DA000
+   1 0 1  0 1 |  D8800  |  DA000
+   1 0 1  1 0 |  D9000  |  DA000
+   1 0 1  1 1 |  D9800  |  DA000
+	      |         |
+   1 1 0  0 0 |  DC000  |  DE000
+   1 1 0  0 1 |  DC800  |  DE000
+   1 1 0  1 0 |  DD000  |  DE000
+   1 1 0  1 1 |  DD800  |  DE000
+	      |         |
+   1 1 1  0 0 |  E0000  |  E2000
+   1 1 1  0 1 |  E0800  |  E2000
+   1 1 1  1 0 |  E1000  |  E2000
+   1 1 1  1 1 |  E1800  |  E2000
+
+  *) To enable the 8K Boot PROM install the jumper ROM.
+     The default is jumper ROM not installed.
+
+
+Setting the Timeouts and Interrupt
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The jumpers labeled EXT1 and EXT2 are used to determine the timeout
+parameters. These two jumpers are normally left open.
+
+To select a hardware interrupt level set one (only one!) of the jumpers
+IRQ2, IRQ3, IRQ4, IRQ5, IRQ7. The Manufacturer's default is IRQ2.
+
+
+Configuring the PC130E for Star or Bus Topology
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The single jumper labeled STAR is used to configure the PC130E board for
+star or bus topology.
+When the jumper is installed, the board may be used in a star network, when
+it is removed, the board can be used in a bus topology.
+
+
+Diagnostic LEDs
+^^^^^^^^^^^^^^^
+
+Two diagnostic LEDs are visible on the rear bracket of the board.
+The green LED monitors the network activity: the red one shows the
+board activity::
+
+ Green  | Status               Red      | Status
+ -------|-------------------   ---------|-------------------
+  on    | normal activity      flash/on | data transfer
+  blink | reconfiguration      off      | no data transfer;
+  off   | defective board or            | incorrect memory or
+	| node ID is zero               | I/O address
+
+
+PC500/PC550 Longboard (16-bit cards)
+------------------------------------
+
+  - from Juergen Seifert <seifert@htwm.de>
+
+
+  .. note::
+
+      There is another Version of the PC500 called Short Version, which
+      is different in hard- and software! The most important differences
+      are:
+
+      - The long board has no Shared memory.
+      - On the long board the selection of the interrupt is done by binary
+	coded switch, on the short board directly by jumper.
+
+[Avery's note: pay special attention to that: the long board HAS NO SHARED
+MEMORY.  This means the current Linux-ARCnet driver can't use these cards.
+I have obtained a PC500Longboard and will be doing some experiments on it in
+the future, but don't hold your breath.  Thanks again to Juergen Seifert for
+his advice about this!]
+
+This description has been written by Juergen Seifert <seifert@htwm.de>
+using information from the following Original SMC Manual
+
+	 "Configuration Guide for SMC ARCNET-PC500/PC550
+	 Series Network Controller Boards Pub. # 900.033 Rev. A
+	 November, 1989"
+
+ARCNET is a registered trademark of the Datapoint Corporation
+SMC is a registered trademark of the Standard Microsystems Corporation
+
+The PC500 is equipped with a standard BNC female connector for connection
+to RG-62/U coax cable.
+The board is designed both for point-to-point connection in star networks
+and for connection to bus networks.
+
+The PC550 is equipped with two modular RJ11-type jacks for connection
+to twisted pair wiring.
+It can be used in a star or a daisy-chained (BUS) network.
+
+::
+
+       1
+       0 9 8 7 6 5 4 3 2 1     6 5 4 3 2 1
+    ____________________________________________________________________
+   < |         SW1         | |     SW2     |                            |
+   > |_____________________| |_____________|                            |
+   <   IRQ    |I/O Addr                                                 |
+   >                                                                 ___|
+   <                                                            CR4 |___|
+   >                                                            CR3 |___|
+   <                                                                 ___|
+   >                                                              N |   | 8
+   <                                                              o |   | 7
+   >                                                              d | S | 6
+   <                                                              e | W | 5
+   >                                                              A | 3 | 4
+   <                                                              d |   | 3
+   >                                                              d |   | 2
+   <                                                              r |___| 1
+   >                                                        |o|    _____|
+   <                                                        |o|   | J1  |
+   >  3 1                                                   JP6   |_____|
+   < |o|o| JP2                                                    | J2  |
+   > |o|o|                                                        |_____|
+   <  4 2__                                               ______________|
+   >    |  |                                             |
+   <____|  |_____________________________________________|
+
+Legend::
+
+  SW1	1-6:	I/O Base Address Select
+	7-10:	Interrupt Select
+  SW2	1-6:	Reserved for Future Use
+  SW3	1-8:	Node ID Select
+  JP2	1-4:	Extended Timeout Select
+  JP6		Selected - Star Topology	(PC500 only)
+		Deselected - Bus Topology	(PC500 only)
+  CR3	Green	Monitors Network Activity
+  CR4	Red	Monitors Board Activity
+  J1		BNC RG62/U Connector		(PC500 only)
+  J1		6-position Telephone Jack	(PC550 only)
+  J2		6-position Telephone Jack	(PC550 only)
+
+Setting one of the switches to Off/Open means "1", On/Closed means "0".
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in group SW3 are used to set the node ID. Each node
+attached to the network must have an unique node ID which must be
+different from 0.
+Switch 1 serves as the least significant bit (LSB).
+
+The node ID is the sum of the values of all switches set to "1"
+These values are::
+
+    Switch | Value
+    -------|-------
+      1    |   1
+      2    |   2
+      3    |   4
+      4    |   8
+      5    |  16
+      6    |  32
+      7    |  64
+      8    | 128
+
+Some Examples::
+
+    Switch         | Hex     | Decimal
+   8 7 6 5 4 3 2 1 | Node ID | Node ID
+   ----------------|---------|---------
+   0 0 0 0 0 0 0 0 |    not allowed
+   0 0 0 0 0 0 0 1 |    1    |    1
+   0 0 0 0 0 0 1 0 |    2    |    2
+   0 0 0 0 0 0 1 1 |    3    |    3
+       . . .       |         |
+   0 1 0 1 0 1 0 1 |   55    |   85
+       . . .       |         |
+   1 0 1 0 1 0 1 0 |   AA    |  170
+       . . .       |         |
+   1 1 1 1 1 1 0 1 |   FD    |  253
+   1 1 1 1 1 1 1 0 |   FE    |  254
+   1 1 1 1 1 1 1 1 |   FF    |  255
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The first six switches in switch group SW1 are used to select one
+of 32 possible I/O Base addresses using the following table::
+
+   Switch       | Hex I/O
+   6 5  4 3 2 1 | Address
+   -------------|--------
+   0 1  0 0 0 0 |  200
+   0 1  0 0 0 1 |  210
+   0 1  0 0 1 0 |  220
+   0 1  0 0 1 1 |  230
+   0 1  0 1 0 0 |  240
+   0 1  0 1 0 1 |  250
+   0 1  0 1 1 0 |  260
+   0 1  0 1 1 1 |  270
+   0 1  1 0 0 0 |  280
+   0 1  1 0 0 1 |  290
+   0 1  1 0 1 0 |  2A0
+   0 1  1 0 1 1 |  2B0
+   0 1  1 1 0 0 |  2C0
+   0 1  1 1 0 1 |  2D0
+   0 1  1 1 1 0 |  2E0 (Manufacturer's default)
+   0 1  1 1 1 1 |  2F0
+   1 1  0 0 0 0 |  300
+   1 1  0 0 0 1 |  310
+   1 1  0 0 1 0 |  320
+   1 1  0 0 1 1 |  330
+   1 1  0 1 0 0 |  340
+   1 1  0 1 0 1 |  350
+   1 1  0 1 1 0 |  360
+   1 1  0 1 1 1 |  370
+   1 1  1 0 0 0 |  380
+   1 1  1 0 0 1 |  390
+   1 1  1 0 1 0 |  3A0
+   1 1  1 0 1 1 |  3B0
+   1 1  1 1 0 0 |  3C0
+   1 1  1 1 0 1 |  3D0
+   1 1  1 1 1 0 |  3E0
+   1 1  1 1 1 1 |  3F0
+
+
+Setting the Interrupt
+^^^^^^^^^^^^^^^^^^^^^
+
+Switches seven through ten of switch group SW1 are used to select the
+interrupt level. The interrupt level is binary coded, so selections
+from 0 to 15 would be possible, but only the following eight values will
+be supported: 3, 4, 5, 7, 9, 10, 11, 12.
+
+::
+
+   Switch   | IRQ
+   10 9 8 7 |
+   ---------|--------
+    0 0 1 1 |  3
+    0 1 0 0 |  4
+    0 1 0 1 |  5
+    0 1 1 1 |  7
+    1 0 0 1 |  9 (=2) (default)
+    1 0 1 0 | 10
+    1 0 1 1 | 11
+    1 1 0 0 | 12
+
+
+Setting the Timeouts
+^^^^^^^^^^^^^^^^^^^^
+
+The two jumpers JP2 (1-4) are used to determine the timeout parameters.
+These two jumpers are normally left open.
+Refer to the COM9026 Data Sheet for alternate configurations.
+
+
+Configuring the PC500 for Star or Bus Topology
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The single jumper labeled JP6 is used to configure the PC500 board for
+star or bus topology.
+When the jumper is installed, the board may be used in a star network, when
+it is removed, the board can be used in a bus topology.
+
+
+Diagnostic LEDs
+^^^^^^^^^^^^^^^
+
+Two diagnostic LEDs are visible on the rear bracket of the board.
+The green LED monitors the network activity: the red one shows the
+board activity::
+
+ Green  | Status               Red      | Status
+ -------|-------------------   ---------|-------------------
+  on    | normal activity      flash/on | data transfer
+  blink | reconfiguration      off      | no data transfer;
+  off   | defective board or            | incorrect memory or
+	| node ID is zero               | I/O address
+
+
+PC710 (8-bit card)
+------------------
+
+  - from J.S. van Oosten <jvoosten@compiler.tdcnet.nl>
+
+Note: this data is gathered by experimenting and looking at info of other
+cards. However, I'm sure I got 99% of the settings right.
+
+The SMC710 card resembles the PC270 card, but is much more basic (i.e. no
+LEDs, RJ11 jacks, etc.) and 8 bit. Here's a little drawing::
+
+    _______________________________________
+   | +---------+  +---------+              |____
+   | |   S2    |  |   S1    |              |
+   | +---------+  +---------+              |
+   |                                       |
+   |  +===+    __                          |
+   |  | R |   |  | X-tal                 ###___
+   |  | O |   |__|                      ####__'|
+   |  | M |    ||                        ###
+   |  +===+                                |
+   |                                       |
+   |   .. JP1   +----------+               |
+   |   ..       | big chip |               |
+   |   ..       |  90C63   |               |
+   |   ..       |          |               |
+   |   ..       +----------+               |
+    -------                     -----------
+	   |||||||||||||||||||||
+
+The row of jumpers at JP1 actually consists of 8 jumpers, (sometimes
+labelled) the same as on the PC270, from top to bottom: EXT2, EXT1, ROM,
+IRQ7, IRQ5, IRQ4, IRQ3, IRQ2 (gee, wonder what they would do? :-) )
+
+S1 and S2 perform the same function as on the PC270, only their numbers
+are swapped (S1 is the nodeaddress, S2 sets IO- and RAM-address).
+
+I know it works when connected to a PC110 type ARCnet board.
+
+
+*****************************************************************************
+
+Possibly SMC
+============
+
+LCS-8830(-T) (8 and 16-bit cards)
+---------------------------------
+
+  - from Mathias Katzer <mkatzer@HRZ.Uni-Bielefeld.DE>
+  - Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl> says the
+    LCS-8830 is slightly different from LCS-8830-T.  These are 8 bit, BUS
+    only (the JP0 jumper is hardwired), and BNC only.
+
+This is a LCS-8830-T made by SMC, I think ('SMC' only appears on one PLCC,
+nowhere else, not even on the few Xeroxed sheets from the manual).
+
+SMC ARCnet Board Type LCS-8830-T::
+
+     ------------------------------------
+    |                                    |
+    |              JP3 88  8 JP2         |
+    |       #####      | \               |
+    |       #####    ET1 ET2          ###|
+    |                              8  ###|
+    |  U3   SW 1                  JP0 ###|  Phone Jacks
+    |  --                             ###|
+    | |  |                               |
+    | |  |   SW2                         |
+    | |  |                               |
+    | |  |  #####                        |
+    |  --   #####                       ####  BNC Connector
+    |                                   ####
+    |   888888 JP1                       |
+    |   234567                           |
+     --                           -------
+       |||||||||||||||||||||||||||
+	--------------------------
+
+
+  SW1: DIP-Switches for Station Address
+  SW2: DIP-Switches for Memory Base and I/O Base addresses
+
+  JP0: If closed, internal termination on (default open)
+  JP1: IRQ Jumpers
+  JP2: Boot-ROM enabled if closed
+  JP3: Jumpers for response timeout
+
+  U3: Boot-ROM Socket
+
+
+  ET1 ET2     Response Time     Idle Time    Reconfiguration Time
+
+		 78                86               840
+   X            285               316              1680
+       X        563               624              1680
+   X   X       1130              1237              1680
+
+  (X means closed jumper)
+
+  (DIP-Switch downwards means "0")
+
+The station address is binary-coded with SW1.
+
+The I/O base address is coded with DIP-Switches 6,7 and 8 of SW2:
+
+========	========
+Switches        Base
+678             Address
+========	========
+000		260-26f
+100		290-29f
+010		2e0-2ef
+110		2f0-2ff
+001		300-30f
+101		350-35f
+011		380-38f
+111 		3e0-3ef
+========	========
+
+
+DIP Switches 1-5 of SW2 encode the RAM and ROM Address Range:
+
+========        ============= ================
+Switches        RAM           ROM
+12345           Address Range  Address Range
+========        ============= ================
+00000		C:0000-C:07ff	C:2000-C:3fff
+10000		C:0800-C:0fff
+01000		C:1000-C:17ff
+11000		C:1800-C:1fff
+00100		C:4000-C:47ff	C:6000-C:7fff
+10100		C:4800-C:4fff
+01100		C:5000-C:57ff
+11100		C:5800-C:5fff
+00010		C:C000-C:C7ff	C:E000-C:ffff
+10010		C:C800-C:Cfff
+01010		C:D000-C:D7ff
+11010		C:D800-C:Dfff
+00110		D:0000-D:07ff	D:2000-D:3fff
+10110		D:0800-D:0fff
+01110		D:1000-D:17ff
+11110		D:1800-D:1fff
+00001		D:4000-D:47ff	D:6000-D:7fff
+10001		D:4800-D:4fff
+01001		D:5000-D:57ff
+11001		D:5800-D:5fff
+00101		D:8000-D:87ff	D:A000-D:bfff
+10101		D:8800-D:8fff
+01101		D:9000-D:97ff
+11101		D:9800-D:9fff
+00011		D:C000-D:c7ff	D:E000-D:ffff
+10011		D:C800-D:cfff
+01011		D:D000-D:d7ff
+11011		D:D800-D:dfff
+00111		E:0000-E:07ff	E:2000-E:3fff
+10111		E:0800-E:0fff
+01111		E:1000-E:17ff
+11111		E:1800-E:1fff
+========        ============= ================
+
+
+PureData Corp
+=============
+
+PDI507 (8-bit card)
+--------------------
+
+  - from Mark Rejhon <mdrejhon@magi.com> (slight modifications by Avery)
+  - Avery's note: I think PDI508 cards (but definitely NOT PDI508Plus cards)
+    are mostly the same as this.  PDI508Plus cards appear to be mainly
+    software-configured.
+
+Jumpers:
+
+	There is a jumper array at the bottom of the card, near the edge
+	connector.  This array is labelled J1.  They control the IRQs and
+	something else.  Put only one jumper on the IRQ pins.
+
+	ETS1, ETS2 are for timing on very long distance networks.  See the
+	more general information near the top of this file.
+
+	There is a J2 jumper on two pins.  A jumper should be put on them,
+	since it was already there when I got the card.  I don't know what
+	this jumper is for though.
+
+	There is a two-jumper array for J3.  I don't know what it is for,
+	but there were already two jumpers on it when I got the card.  It's
+	a six pin grid in a two-by-three fashion.  The jumpers were
+	configured as follows::
+
+	   .-------.
+	 o | o   o |
+	   :-------:    ------> Accessible end of card with connectors
+	 o | o   o |             in this direction ------->
+	   `-------'
+
+Carl de Billy <CARL@carainfo.com> explains J3 and J4:
+
+   J3 Diagram::
+
+	   .-------.
+	 o | o   o |
+	   :-------:    TWIST Technology
+	 o | o   o |
+	   `-------'
+	   .-------.
+	   | o   o | o
+	   :-------:    COAX Technology
+	   | o   o | o
+	   `-------'
+
+  - If using coax cable in a bus topology the J4 jumper must be removed;
+    place it on one pin.
+
+  - If using bus topology with twisted pair wiring move the J3
+    jumpers so they connect the middle pin and the pins closest to the RJ11
+    Connectors.  Also the J4 jumper must be removed; place it on one pin of
+    J4 jumper for storage.
+
+  - If using  star topology with twisted pair wiring move the J3
+    jumpers so they connect the middle pin and the pins closest to the RJ11
+    connectors.
+
+
+DIP Switches:
+
+	The DIP switches accessible on the accessible end of the card while
+	it is installed, is used to set the ARCnet address.  There are 8
+	switches.  Use an address from 1 to 254
+
+	==========      =========================
+	Switch No.	ARCnet address
+	12345678
+	==========      =========================
+	00000000	FF  	(Don't use this!)
+	00000001	FE
+	00000010	FD
+	...
+	11111101	2
+	11111110	1
+	11111111	0	(Don't use this!)
+	==========      =========================
+
+	There is another array of eight DIP switches at the top of the
+	card.  There are five labelled MS0-MS4 which seem to control the
+	memory address, and another three labelled IO0-IO2 which seem to
+	control the base I/O address of the card.
+
+	This was difficult to test by trial and error, and the I/O addresses
+	are in a weird order.  This was tested by setting the DIP switches,
+	rebooting the computer, and attempting to load ARCETHER at various
+	addresses (mostly between 0x200 and 0x400).  The address that caused
+	the red transmit LED to blink, is the one that I thought works.
+
+	Also, the address 0x3D0 seem to have a special meaning, since the
+	ARCETHER packet driver loaded fine, but without the red LED
+	blinking.  I don't know what 0x3D0 is for though.  I recommend using
+	an address of 0x300 since Windows may not like addresses below
+	0x300.
+
+	=============   ===========
+	IO Switch No.   I/O address
+	210
+	=============   ===========
+	111             0x260
+	110             0x290
+	101             0x2E0
+	100             0x2F0
+	011             0x300
+	010             0x350
+	001             0x380
+	000             0x3E0
+	=============   ===========
+
+	The memory switches set a reserved address space of 0x1000 bytes
+	(0x100 segment units, or 4k).  For example if I set an address of
+	0xD000, it will use up addresses 0xD000 to 0xD100.
+
+	The memory switches were tested by booting using QEMM386 stealth,
+	and using LOADHI to see what address automatically became excluded
+	from the upper memory regions, and then attempting to load ARCETHER
+	using these addresses.
+
+	I recommend using an ARCnet memory address of 0xD000, and putting
+	the EMS page frame at 0xC000 while using QEMM stealth mode.  That
+	way, you get contiguous high memory from 0xD100 almost all the way
+	the end of the megabyte.
+
+	Memory Switch 0 (MS0) didn't seem to work properly when set to OFF
+	on my card.  It could be malfunctioning on my card.  Experiment with
+	it ON first, and if it doesn't work, set it to OFF.  (It may be a
+	modifier for the 0x200 bit?)
+
+	=============   ============================================
+	MS Switch No.
+	43210           Memory address
+	=============   ============================================
+	00001           0xE100  (guessed - was not detected by QEMM)
+	00011           0xE000  (guessed - was not detected by QEMM)
+	00101           0xDD00
+	00111           0xDC00
+	01001           0xD900
+	01011           0xD800
+	01101           0xD500
+	01111           0xD400
+	10001           0xD100
+	10011           0xD000
+	10101           0xCD00
+	10111           0xCC00
+	11001           0xC900 (guessed - crashes tested system)
+	11011           0xC800 (guessed - crashes tested system)
+	11101           0xC500 (guessed - crashes tested system)
+	11111           0xC400 (guessed - crashes tested system)
+	=============   ============================================
+
+CNet Technology Inc.
+====================
+
+120 Series (8-bit cards)
+------------------------
+  - from Juergen Seifert <seifert@htwm.de>
+
+This description has been written by Juergen Seifert <seifert@htwm.de>
+using information from the following Original CNet Manual
+
+	      "ARCNET USER'S MANUAL for
+	      CN120A
+	      CN120AB
+	      CN120TP
+	      CN120ST
+	      CN120SBT
+	      P/N:12-01-0007
+	      Revision 3.00"
+
+ARCNET is a registered trademark of the Datapoint Corporation
+
+- P/N 120A   ARCNET 8 bit XT/AT Star
+- P/N 120AB  ARCNET 8 bit XT/AT Bus
+- P/N 120TP  ARCNET 8 bit XT/AT Twisted Pair
+- P/N 120ST  ARCNET 8 bit XT/AT Star, Twisted Pair
+- P/N 120SBT ARCNET 8 bit XT/AT Star, Bus, Twisted Pair
+
+::
+
+    __________________________________________________________________
+   |                                                                  |
+   |                                                               ___|
+   |                                                          LED |___|
+   |                                                               ___|
+   |                                                            N |   | ID7
+   |                                                            o |   | ID6
+   |                                                            d | S | ID5
+   |                                                            e | W | ID4
+   |                     ___________________                    A | 2 | ID3
+   |                    |                   |                   d |   | ID2
+   |                    |                   |  1 2 3 4 5 6 7 8  d |   | ID1
+   |                    |                   | _________________ r |___| ID0
+   |                    |      90C65        ||       SW1       |  ____|
+   |  JP 8 7            |                   ||_________________| |    |
+   |    |o|o|  JP1      |                   |                    | J2 |
+   |    |o|o|  |oo|     |                   |         JP 1 1 1   |    |
+   |   ______________   |                   |            0 1 2   |____|
+   |  |  PROM        |  |___________________|           |o|o|o|  _____|
+   |  >  SOCKET      |  JP 6 5 4 3 2                    |o|o|o| | J1  |
+   |  |______________|    |o|o|o|o|o|                   |o|o|o| |_____|
+   |_____                 |o|o|o|o|o|                   ______________|
+	 |                                             |
+	 |_____________________________________________|
+
+Legend::
+
+  90C65       ARCNET Probe
+  S1  1-5:    Base Memory Address Select
+      6-8:    Base I/O Address Select
+  S2  1-8:    Node ID Select (ID0-ID7)
+  JP1     ROM Enable Select
+  JP2     IRQ2
+  JP3     IRQ3
+  JP4     IRQ4
+  JP5     IRQ5
+  JP6     IRQ7
+  JP7/JP8     ET1, ET2 Timeout Parameters
+  JP10/JP11   Coax / Twisted Pair Select  (CN120ST/SBT only)
+  JP12        Terminator Select       (CN120AB/ST/SBT only)
+  J1      BNC RG62/U Connector        (all except CN120TP)
+  J2      Two 6-position Telephone Jack   (CN120TP/ST/SBT only)
+
+Setting one of the switches to Off means "1", On means "0".
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in SW2 are used to set the node ID. Each node attached
+to the network must have an unique node ID which must be different from 0.
+Switch 1 (ID0) serves as the least significant bit (LSB).
+
+The node ID is the sum of the values of all switches set to "1"
+These values are:
+
+   =======  ======  =====
+   Switch   Label   Value
+   =======  ======  =====
+     1      ID0       1
+     2      ID1       2
+     3      ID2       4
+     4      ID3       8
+     5      ID4      16
+     6      ID5      32
+     7      ID6      64
+     8      ID7     128
+   =======  ======  =====
+
+Some Examples::
+
+    Switch         | Hex     | Decimal
+   8 7 6 5 4 3 2 1 | Node ID | Node ID
+   ----------------|---------|---------
+   0 0 0 0 0 0 0 0 |    not allowed
+   0 0 0 0 0 0 0 1 |    1    |    1
+   0 0 0 0 0 0 1 0 |    2    |    2
+   0 0 0 0 0 0 1 1 |    3    |    3
+       . . .       |         |
+   0 1 0 1 0 1 0 1 |   55    |   85
+       . . .       |         |
+   1 0 1 0 1 0 1 0 |   AA    |  170
+       . . .       |         |
+   1 1 1 1 1 1 0 1 |   FD    |  253
+   1 1 1 1 1 1 1 0 |   FE    |  254
+   1 1 1 1 1 1 1 1 |   FF    |  255
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The last three switches in switch block SW1 are used to select one
+of eight possible I/O Base addresses using the following table::
+
+
+   Switch      | Hex I/O
+    6   7   8  | Address
+   ------------|--------
+   ON  ON  ON  |  260
+   OFF ON  ON  |  290
+   ON  OFF ON  |  2E0  (Manufacturer's default)
+   OFF OFF ON  |  2F0
+   ON  ON  OFF |  300
+   OFF ON  OFF |  350
+   ON  OFF OFF |  380
+   OFF OFF OFF |  3E0
+
+
+Setting the Base Memory (RAM) buffer Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The memory buffer (RAM) requires 2K. The base of this buffer can be
+located in any of eight positions. The address of the Boot Prom is
+memory base + 8K or memory base + 0x2000.
+Switches 1-5 of switch block SW1 select the Memory Base address.
+
+::
+
+   Switch              | Hex RAM | Hex ROM
+    1   2   3   4   5  | Address | Address *)
+   --------------------|---------|-----------
+   ON  ON  ON  ON  ON  |  C0000  |  C2000
+   ON  ON  OFF ON  ON  |  C4000  |  C6000
+   ON  ON  ON  OFF ON  |  CC000  |  CE000
+   ON  ON  OFF OFF ON  |  D0000  |  D2000  (Manufacturer's default)
+   ON  ON  ON  ON  OFF |  D4000  |  D6000
+   ON  ON  OFF ON  OFF |  D8000  |  DA000
+   ON  ON  ON  OFF OFF |  DC000  |  DE000
+   ON  ON  OFF OFF OFF |  E0000  |  E2000
+
+  *) To enable the Boot ROM install the jumper JP1
+
+.. note::
+
+      Since the switches 1 and 2 are always set to ON it may be possible
+      that they can be used to add an offset of 2K, 4K or 6K to the base
+      address, but this feature is not documented in the manual and I
+      haven't tested it yet.
+
+
+Setting the Interrupt Line
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To select a hardware interrupt level install one (only one!) of the jumpers
+JP2, JP3, JP4, JP5, JP6. JP2 is the default::
+
+   Jumper | IRQ
+   -------|-----
+     2    |  2
+     3    |  3
+     4    |  4
+     5    |  5
+     6    |  7
+
+
+Setting the Internal Terminator on CN120AB/TP/SBT
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The jumper JP12 is used to enable the internal terminator::
+
+			 -----
+       0                |  0  |
+     -----   ON         |     |  ON
+    |  0  |             |  0  |
+    |     |  OFF         -----   OFF
+    |  0  |                0
+     -----
+   Terminator          Terminator
+    disabled            enabled
+
+
+Selecting the Connector Type on CN120ST/SBT
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+     JP10    JP11        JP10    JP11
+			 -----   -----
+       0       0        |  0  | |  0  |
+     -----   -----      |     | |     |
+    |  0  | |  0  |     |  0  | |  0  |
+    |     | |     |      -----   -----
+    |  0  | |  0  |        0       0
+     -----   -----
+     Coaxial Cable       Twisted Pair Cable
+       (Default)
+
+
+Setting the Timeout Parameters
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The jumpers labeled EXT1 and EXT2 are used to determine the timeout
+parameters. These two jumpers are normally left open.
+
+
+CNet Technology Inc.
+====================
+
+160 Series (16-bit cards)
+-------------------------
+  - from Juergen Seifert <seifert@htwm.de>
+
+This description has been written by Juergen Seifert <seifert@htwm.de>
+using information from the following Original CNet Manual
+
+	      "ARCNET USER'S MANUAL for
+	      CN160A CN160AB CN160TP
+	      P/N:12-01-0006 Revision 3.00"
+
+ARCNET is a registered trademark of the Datapoint Corporation
+
+- P/N 160A   ARCNET 16 bit XT/AT Star
+- P/N 160AB  ARCNET 16 bit XT/AT Bus
+- P/N 160TP  ARCNET 16 bit XT/AT Twisted Pair
+
+::
+
+   ___________________________________________________________________
+  <                             _________________________          ___|
+  >               |oo| JP2     |                         |    LED |___|
+  <               |oo| JP1     |        9026             |    LED |___|
+  >                            |_________________________|         ___|
+  <                                                             N |   | ID7
+  >                                                      1      o |   | ID6
+  <                                    1 2 3 4 5 6 7 8 9 0      d | S | ID5
+  >         _______________           _____________________     e | W | ID4
+  <        |     PROM      |         |         SW1         |    A | 2 | ID3
+  >        >    SOCKET     |         |_____________________|    d |   | ID2
+  <        |_______________|          | IO-Base   | MEM   |     d |   | ID1
+  >                                                             r |___| ID0
+  <                                                               ____|
+  >                                                              |    |
+  <                                                              | J1 |
+  >                                                              |    |
+  <                                                              |____|
+  >                            1 1 1 1                                |
+  <  3 4 5 6 7      JP     8 9 0 1 2 3                                |
+  > |o|o|o|o|o|           |o|o|o|o|o|o|                               |
+  < |o|o|o|o|o| __        |o|o|o|o|o|o|                    ___________|
+  >            |  |                                       |
+  <____________|  |_______________________________________|
+
+Legend::
+
+  9026            ARCNET Probe
+  SW1 1-6:    Base I/O Address Select
+      7-10:   Base Memory Address Select
+  SW2 1-8:    Node ID Select (ID0-ID7)
+  JP1/JP2     ET1, ET2 Timeout Parameters
+  JP3-JP13    Interrupt Select
+  J1      BNC RG62/U Connector        (CN160A/AB only)
+  J1      Two 6-position Telephone Jack   (CN160TP only)
+  LED
+
+Setting one of the switches to Off means "1", On means "0".
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in SW2 are used to set the node ID. Each node attached
+to the network must have an unique node ID which must be different from 0.
+Switch 1 (ID0) serves as the least significant bit (LSB).
+
+The node ID is the sum of the values of all switches set to "1"
+These values are::
+
+   Switch | Label | Value
+   -------|-------|-------
+     1    | ID0   |   1
+     2    | ID1   |   2
+     3    | ID2   |   4
+     4    | ID3   |   8
+     5    | ID4   |  16
+     6    | ID5   |  32
+     7    | ID6   |  64
+     8    | ID7   | 128
+
+Some Examples::
+
+    Switch         | Hex     | Decimal
+   8 7 6 5 4 3 2 1 | Node ID | Node ID
+   ----------------|---------|---------
+   0 0 0 0 0 0 0 0 |    not allowed
+   0 0 0 0 0 0 0 1 |    1    |    1
+   0 0 0 0 0 0 1 0 |    2    |    2
+   0 0 0 0 0 0 1 1 |    3    |    3
+       . . .       |         |
+   0 1 0 1 0 1 0 1 |   55    |   85
+       . . .       |         |
+   1 0 1 0 1 0 1 0 |   AA    |  170
+       . . .       |         |
+   1 1 1 1 1 1 0 1 |   FD    |  253
+   1 1 1 1 1 1 1 0 |   FE    |  254
+   1 1 1 1 1 1 1 1 |   FF    |  255
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The first six switches in switch block SW1 are used to select the I/O Base
+address using the following table::
+
+	     Switch        | Hex I/O
+    1   2   3   4   5   6  | Address
+   ------------------------|--------
+   OFF ON  ON  OFF OFF ON  |  260
+   OFF ON  OFF ON  ON  OFF |  290
+   OFF ON  OFF OFF OFF ON  |  2E0  (Manufacturer's default)
+   OFF ON  OFF OFF OFF OFF |  2F0
+   OFF OFF ON  ON  ON  ON  |  300
+   OFF OFF ON  OFF ON  OFF |  350
+   OFF OFF OFF ON  ON  ON  |  380
+   OFF OFF OFF OFF OFF ON  |  3E0
+
+Note: Other IO-Base addresses seem to be selectable, but only the above
+      combinations are documented.
+
+
+Setting the Base Memory (RAM) buffer Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The switches 7-10 of switch block SW1 are used to select the Memory
+Base address of the RAM (2K) and the PROM::
+
+   Switch          | Hex RAM | Hex ROM
+    7   8   9  10  | Address | Address
+   ----------------|---------|-----------
+   OFF OFF ON  ON  |  C0000  |  C8000
+   OFF OFF ON  OFF |  D0000  |  D8000 (Default)
+   OFF OFF OFF ON  |  E0000  |  E8000
+
+.. note::
+
+      Other MEM-Base addresses seem to be selectable, but only the above
+      combinations are documented.
+
+
+Setting the Interrupt Line
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To select a hardware interrupt level install one (only one!) of the jumpers
+JP3 through JP13 using the following table::
+
+   Jumper | IRQ
+   -------|-----------------
+     3    |  14
+     4    |  15
+     5    |  12
+     6    |  11
+     7    |  10
+     8    |   3
+     9    |   4
+    10    |   5
+    11    |   6
+    12    |   7
+    13    |   2 (=9) Default!
+
+.. note::
+
+       - Do not use JP11=IRQ6, it may conflict with your Floppy Disk
+	 Controller
+       - Use JP3=IRQ14 only, if you don't have an IDE-, MFM-, or RLL-
+	 Hard Disk, it may conflict with their controllers
+
+
+Setting the Timeout Parameters
+------------------------------
+
+The jumpers labeled JP1 and JP2 are used to determine the timeout
+parameters. These two jumpers are normally left open.
+
+
+Lantech
+=======
+
+8-bit card, unknown model
+-------------------------
+  - from Vlad Lungu <vlungu@ugal.ro> - his e-mail address seemed broken at
+    the time I tried to reach him.  Sorry Vlad, if you didn't get my reply.
+
+::
+
+   ________________________________________________________________
+   |   1         8                                                 |
+   |   ___________                                               __|
+   |   |   SW1    |                                         LED |__|
+   |   |__________|                                                |
+   |                                                            ___|
+   |                _____________________                       |S | 8
+   |                |                   |                       |W |
+   |                |                   |                       |2 |
+   |                |                   |                       |__| 1
+   |                |      UM9065L      |     |o|  JP4         ____|____
+   |                |                   |     |o|              |  CN    |
+   |                |                   |                      |________|
+   |                |                   |                          |
+   |                |___________________|                          |
+   |                                                               |
+   |                                                               |
+   |      _____________                                            |
+   |      |            |                                           |
+   |      |    PROM    |        |ooooo|  JP6                       |
+   |      |____________|        |ooooo|                            |
+   |_____________                                             _   _|
+		|____________________________________________| |__|
+
+
+UM9065L : ARCnet Controller
+
+SW 1    : Shared Memory Address and I/O Base
+
+::
+
+	ON=0
+
+	12345|Memory Address
+	-----|--------------
+	00001|  D4000
+	00010|  CC000
+	00110|  D0000
+	01110|  D1000
+	01101|  D9000
+	10010|  CC800
+	10011|  DC800
+	11110|  D1800
+
+It seems that the bits are considered in reverse order.  Also, you must
+observe that some of those addresses are unusual and I didn't probe them; I
+used a memory dump in DOS to identify them.  For the 00000 configuration and
+some others that I didn't write here the card seems to conflict with the
+video card (an S3 GENDAC). I leave the full decoding of those addresses to
+you.
+
+::
+
+	678| I/O Address
+	---|------------
+	000|    260
+	001|    failed probe
+	010|    2E0
+	011|    380
+	100|    290
+	101|    350
+	110|    failed probe
+	111|    3E0
+
+  SW 2  : Node ID (binary coded)
+
+  JP 4  : Boot PROM enable   CLOSE - enabled
+			     OPEN  - disabled
+
+  JP 6  : IRQ set (ONLY ONE jumper on 1-5 for IRQ 2-6)
+
+
+Acer
+====
+
+8-bit card, Model 5210-003
+--------------------------
+
+  - from Vojtech Pavlik <vojtech@suse.cz> using portions of the existing
+    arcnet-hardware file.
+
+This is a 90C26 based card.  Its configuration seems similar to the SMC
+PC100, but has some additional jumpers I don't know the meaning of.
+
+::
+
+	       __
+	      |  |
+   ___________|__|_________________________
+  |         |      |                       |
+  |         | BNC  |                       |
+  |         |______|                    ___|
+  |  _____________________             |___
+  | |                     |                |
+  | | Hybrid IC           |                |
+  | |                     |       o|o J1   |
+  | |_____________________|       8|8      |
+  |                               8|8 J5   |
+  |                               o|o      |
+  |                               8|8      |
+  |__                             8|8      |
+ (|__| LED                        o|o      |
+  |                               8|8      |
+  |                               8|8 J15  |
+  |                                        |
+  |                    _____               |
+  |                   |     |   _____      |
+  |                   |     |  |     |  ___|
+  |                   |     |  |     | |
+  |  _____            | ROM |  | UFS | |
+  | |     |           |     |  |     | |
+  | |     |     ___   |     |  |     | |
+  | |     |    |   |  |__.__|  |__.__| |
+  | | NCR |    |XTL|   _____    _____  |
+  | |     |    |___|  |     |  |     | |
+  | |90C26|           |     |  |     | |
+  | |     |           | RAM |  | UFS | |
+  | |     | J17 o|o   |     |  |     | |
+  | |     | J16 o|o   |     |  |     | |
+  | |__.__|           |__.__|  |__.__| |
+  |  ___                               |
+  | |   |8                             |
+  | |SW2|                              |
+  | |   |                              |
+  | |___|1                             |
+  |  ___                               |
+  | |   |10           J18 o|o          |
+  | |   |                 o|o          |
+  | |SW1|                 o|o          |
+  | |   |             J21 o|o          |
+  | |___|1                             |
+  |                                    |
+  |____________________________________|
+
+
+Legend::
+
+  90C26       ARCNET Chip
+  XTL         20 MHz Crystal
+  SW1 1-6     Base I/O Address Select
+      7-10    Memory Address Select
+  SW2 1-8     Node ID Select (ID0-ID7)
+  J1-J5       IRQ Select
+  J6-J21      Unknown (Probably extra timeouts & ROM enable ...)
+  LED1        Activity LED
+  BNC         Coax connector (STAR ARCnet)
+  RAM         2k of SRAM
+  ROM         Boot ROM socket
+  UFS         Unidentified Flying Sockets
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in SW2 are used to set the node ID. Each node attached
+to the network must have an unique node ID which must not be 0.
+Switch 1 (ID0) serves as the least significant bit (LSB).
+
+Setting one of the switches to OFF means "1", ON means "0".
+
+The node ID is the sum of the values of all switches set to "1"
+These values are::
+
+   Switch | Value
+   -------|-------
+     1    |   1
+     2    |   2
+     3    |   4
+     4    |   8
+     5    |  16
+     6    |  32
+     7    |  64
+     8    | 128
+
+Don't set this to 0 or 255; these values are reserved.
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The switches 1 to 6 of switch block SW1 are used to select one
+of 32 possible I/O Base addresses using the following tables::
+
+	  | Hex
+   Switch | Value
+   -------|-------
+     1    | 200
+     2    | 100
+     3    |  80
+     4    |  40
+     5    |  20
+     6    |  10
+
+The I/O address is sum of all switches set to "1". Remember that
+the I/O address space bellow 0x200 is RESERVED for mainboard, so
+switch 1 should be ALWAYS SET TO OFF.
+
+
+Setting the Base Memory (RAM) buffer Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The memory buffer (RAM) requires 2K. The base of this buffer can be
+located in any of sixteen positions. However, the addresses below
+A0000 are likely to cause system hang because there's main RAM.
+
+Jumpers 7-10 of switch block SW1 select the Memory Base address::
+
+   Switch          | Hex RAM
+    7   8   9  10  | Address
+   ----------------|---------
+   OFF OFF OFF OFF |  F0000 (conflicts with main BIOS)
+   OFF OFF OFF ON  |  E0000
+   OFF OFF ON  OFF |  D0000
+   OFF OFF ON  ON  |  C0000 (conflicts with video BIOS)
+   OFF ON  OFF OFF |  B0000 (conflicts with mono video)
+   OFF ON  OFF ON  |  A0000 (conflicts with graphics)
+
+
+Setting the Interrupt Line
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Jumpers 1-5 of the jumper block J1 control the IRQ level. ON means
+shorted, OFF means open::
+
+    Jumper              |  IRQ
+    1   2   3   4   5   |
+   ----------------------------
+    ON  OFF OFF OFF OFF |  7
+    OFF ON  OFF OFF OFF |  5
+    OFF OFF ON  OFF OFF |  4
+    OFF OFF OFF ON  OFF |  3
+    OFF OFF OFF OFF ON  |  2
+
+
+Unknown jumpers & sockets
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+I know nothing about these. I just guess that J16&J17 are timeout
+jumpers and maybe one of J18-J21 selects ROM. Also J6-J10 and
+J11-J15 are connecting IRQ2-7 to some pins on the UFSs. I can't
+guess the purpose.
+
+Datapoint?
+==========
+
+LAN-ARC-8, an 8-bit card
+------------------------
+
+  - from Vojtech Pavlik <vojtech@suse.cz>
+
+This is another SMC 90C65-based ARCnet card. I couldn't identify the
+manufacturer, but it might be DataPoint, because the card has the
+original arcNet logo in its upper right corner.
+
+::
+
+	  _______________________________________________________
+	 |                         _________                     |
+	 |                        |   SW2   | ON      arcNet     |
+	 |                        |_________| OFF             ___|
+	 |  _____________         1 ______  8                |   | 8
+	 | |             | SW1     | XTAL | ____________     | S |
+	 | > RAM (2k)    |         |______||            |    | W |
+	 | |_____________|                 |      H     |    | 3 |
+	 |                        _________|_____ y     |    |___| 1
+	 |  _________            |         |     |b     |        |
+	 | |_________|           |         |     |r     |        |
+	 |                       |     SMC |     |i     |        |
+	 |                       |    90C65|     |d     |        |
+	 |  _________            |         |     |      |        |
+	 | |   SW1   | ON        |         |     |I     |        |
+	 | |_________| OFF       |_________|_____/C     |   _____|
+	 |  1       8                      |            |  |     |___
+	 |  ______________                 |            |  | BNC |___|
+	 | |              |                |____________|  |_____|
+	 | > EPROM SOCKET |              _____________           |
+	 | |______________|             |_____________|          |
+	 |                                         ______________|
+	 |                                        |
+	 |________________________________________|
+
+Legend::
+
+  90C65       ARCNET Chip
+  SW1 1-5:    Base Memory Address Select
+      6-8:    Base I/O Address Select
+  SW2 1-8:    Node ID Select
+  SW3 1-5:    IRQ Select
+      6-7:    Extra Timeout
+      8  :    ROM Enable
+  BNC         Coax connector
+  XTAL        20 MHz Crystal
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in SW3 are used to set the node ID. Each node attached
+to the network must have an unique node ID which must not be 0.
+Switch 1 serves as the least significant bit (LSB).
+
+Setting one of the switches to Off means "1", On means "0".
+
+The node ID is the sum of the values of all switches set to "1"
+These values are::
+
+   Switch | Value
+   -------|-------
+     1    |   1
+     2    |   2
+     3    |   4
+     4    |   8
+     5    |  16
+     6    |  32
+     7    |  64
+     8    | 128
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The last three switches in switch block SW1 are used to select one
+of eight possible I/O Base addresses using the following table::
+
+
+   Switch      | Hex I/O
+    6   7   8  | Address
+   ------------|--------
+   ON  ON  ON  |  260
+   OFF ON  ON  |  290
+   ON  OFF ON  |  2E0  (Manufacturer's default)
+   OFF OFF ON  |  2F0
+   ON  ON  OFF |  300
+   OFF ON  OFF |  350
+   ON  OFF OFF |  380
+   OFF OFF OFF |  3E0
+
+
+Setting the Base Memory (RAM) buffer Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The memory buffer (RAM) requires 2K. The base of this buffer can be
+located in any of eight positions. The address of the Boot Prom is
+memory base + 0x2000.
+
+Jumpers 3-5 of switch block SW1 select the Memory Base address.
+
+::
+
+   Switch              | Hex RAM | Hex ROM
+    1   2   3   4   5  | Address | Address *)
+   --------------------|---------|-----------
+   ON  ON  ON  ON  ON  |  C0000  |  C2000
+   ON  ON  OFF ON  ON  |  C4000  |  C6000
+   ON  ON  ON  OFF ON  |  CC000  |  CE000
+   ON  ON  OFF OFF ON  |  D0000  |  D2000  (Manufacturer's default)
+   ON  ON  ON  ON  OFF |  D4000  |  D6000
+   ON  ON  OFF ON  OFF |  D8000  |  DA000
+   ON  ON  ON  OFF OFF |  DC000  |  DE000
+   ON  ON  OFF OFF OFF |  E0000  |  E2000
+
+  *) To enable the Boot ROM set the switch 8 of switch block SW3 to position ON.
+
+The switches 1 and 2 probably add 0x0800 and 0x1000 to RAM base address.
+
+
+Setting the Interrupt Line
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Switches 1-5 of the switch block SW3 control the IRQ level::
+
+    Jumper              |  IRQ
+    1   2   3   4   5   |
+   ----------------------------
+    ON  OFF OFF OFF OFF |  3
+    OFF ON  OFF OFF OFF |  4
+    OFF OFF ON  OFF OFF |  5
+    OFF OFF OFF ON  OFF |  7
+    OFF OFF OFF OFF ON  |  2
+
+
+Setting the Timeout Parameters
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The switches 6-7 of the switch block SW3 are used to determine the timeout
+parameters.  These two switches are normally left in the OFF position.
+
+
+Topware
+=======
+
+8-bit card, TA-ARC/10
+---------------------
+
+  - from Vojtech Pavlik <vojtech@suse.cz>
+
+This is another very similar 90C65 card. Most of the switches and jumpers
+are the same as on other clones.
+
+::
+
+   _____________________________________________________________________
+  |  ___________   |                         |            ______        |
+  | |SW2 NODE ID|  |                         |           | XTAL |       |
+  | |___________|  |  Hybrid IC              |           |______|       |
+  |  ___________   |                         |                        __|
+  | |SW1 MEM+I/O|  |_________________________|                   LED1|__|)
+  | |___________|           1 2                                         |
+  |                     J3 |o|o| TIMEOUT                          ______|
+  |     ______________     |o|o|                                 |      |
+  |    |              |  ___________________                     | RJ   |
+  |    > EPROM SOCKET | |                   \                    |------|
+  |J2  |______________| |                    |                   |      |
+  ||o|                  |                    |                   |______|
+  ||o| ROM ENABLE       |        SMC         |    _________             |
+  |     _____________   |       90C65        |   |_________|       _____|
+  |    |             |  |                    |                    |     |___
+  |    > RAM (2k)    |  |                    |                    | BNC |___|
+  |    |_____________|  |                    |                    |_____|
+  |                     |____________________|                          |
+  | ________ IRQ 2 3 4 5 7                  ___________                 |
+  ||________|   |o|o|o|o|o|                |___________|                |
+  |________   J1|o|o|o|o|o|                               ______________|
+	   |                                             |
+	   |_____________________________________________|
+
+Legend::
+
+  90C65       ARCNET Chip
+  XTAL        20 MHz Crystal
+  SW1 1-5     Base Memory Address Select
+      6-8     Base I/O Address Select
+  SW2 1-8     Node ID Select (ID0-ID7)
+  J1          IRQ Select
+  J2          ROM Enable
+  J3          Extra Timeout
+  LED1        Activity LED
+  BNC         Coax connector (BUS ARCnet)
+  RJ          Twisted Pair Connector (daisy chain)
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in SW2 are used to set the node ID. Each node attached to
+the network must have an unique node ID which must not be 0.  Switch 1 (ID0)
+serves as the least significant bit (LSB).
+
+Setting one of the switches to Off means "1", On means "0".
+
+The node ID is the sum of the values of all switches set to "1"
+These values are::
+
+   Switch | Label | Value
+   -------|-------|-------
+     1    | ID0   |   1
+     2    | ID1   |   2
+     3    | ID2   |   4
+     4    | ID3   |   8
+     5    | ID4   |  16
+     6    | ID5   |  32
+     7    | ID6   |  64
+     8    | ID7   | 128
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The last three switches in switch block SW1 are used to select one
+of eight possible I/O Base addresses using the following table::
+
+
+   Switch      | Hex I/O
+    6   7   8  | Address
+   ------------|--------
+   ON  ON  ON  |  260  (Manufacturer's default)
+   OFF ON  ON  |  290
+   ON  OFF ON  |  2E0
+   OFF OFF ON  |  2F0
+   ON  ON  OFF |  300
+   OFF ON  OFF |  350
+   ON  OFF OFF |  380
+   OFF OFF OFF |  3E0
+
+
+Setting the Base Memory (RAM) buffer Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The memory buffer (RAM) requires 2K. The base of this buffer can be
+located in any of eight positions. The address of the Boot Prom is
+memory base + 0x2000.
+
+Jumpers 3-5 of switch block SW1 select the Memory Base address.
+
+::
+
+   Switch              | Hex RAM | Hex ROM
+    1   2   3   4   5  | Address | Address *)
+   --------------------|---------|-----------
+   ON  ON  ON  ON  ON  |  C0000  |  C2000
+   ON  ON  OFF ON  ON  |  C4000  |  C6000  (Manufacturer's default)
+   ON  ON  ON  OFF ON  |  CC000  |  CE000
+   ON  ON  OFF OFF ON  |  D0000  |  D2000
+   ON  ON  ON  ON  OFF |  D4000  |  D6000
+   ON  ON  OFF ON  OFF |  D8000  |  DA000
+   ON  ON  ON  OFF OFF |  DC000  |  DE000
+   ON  ON  OFF OFF OFF |  E0000  |  E2000
+
+   *) To enable the Boot ROM short the jumper J2.
+
+The jumpers 1 and 2 probably add 0x0800 and 0x1000 to RAM address.
+
+
+Setting the Interrupt Line
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Jumpers 1-5 of the jumper block J1 control the IRQ level.  ON means
+shorted, OFF means open::
+
+    Jumper              |  IRQ
+    1   2   3   4   5   |
+   ----------------------------
+    ON  OFF OFF OFF OFF |  2
+    OFF ON  OFF OFF OFF |  3
+    OFF OFF ON  OFF OFF |  4
+    OFF OFF OFF ON  OFF |  5
+    OFF OFF OFF OFF ON  |  7
+
+
+Setting the Timeout Parameters
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The jumpers J3 are used to set the timeout parameters. These two
+jumpers are normally left open.
+
+Thomas-Conrad
+=============
+
+Model #500-6242-0097 REV A (8-bit card)
+---------------------------------------
+
+  - from Lars Karlsson <100617.3473@compuserve.com>
+
+::
+
+     ________________________________________________________
+   |          ________   ________                           |_____
+   |         |........| |........|                            |
+   |         |________| |________|                         ___|
+   |            SW 3       SW 1                           |   |
+   |         Base I/O   Base Addr.                Station |   |
+   |                                              address |   |
+   |    ______                                    switch  |   |
+   |   |      |                                           |   |
+   |   |      |                                           |___|
+   |   |      |                                 ______        |___._
+   |   |______|                                |______|         ____| BNC
+   |                                            Jumper-        _____| Connector
+   |   Main chip                                block  _    __|   '
+   |                                                  | |  |    RJ Connector
+   |                                                  |_|  |    with 110 Ohm
+   |                                                       |__  Terminator
+   |    ___________                                         __|
+   |   |...........|                                       |    RJ-jack
+   |   |...........|    _____                              |    (unused)
+   |   |___________|   |_____|                             |__
+   |  Boot PROM socket IRQ-jumpers                            |_  Diagnostic
+   |________                                       __          _| LED (red)
+	    | | | | | | | | | | | | | | | | | | | |  |        |
+	    | | | | | | | | | | | | | | | | | | | |  |________|
+							      |
+							      |
+
+And here are the settings for some of the switches and jumpers on the cards.
+
+::
+
+	    I/O
+
+	   1 2 3 4 5 6 7 8
+
+  2E0----- 0 0 0 1 0 0 0 1
+  2F0----- 0 0 0 1 0 0 0 0
+  300----- 0 0 0 0 1 1 1 1
+  350----- 0 0 0 0 1 1 1 0
+
+"0" in the above example means switch is off "1" means that it is on.
+
+::
+
+      ShMem address.
+
+	1 2 3 4 5 6 7 8
+
+  CX00--0 0 1 1 | |   |
+  DX00--0 0 1 0       |
+  X000--------- 1 1   |
+  X400--------- 1 0   |
+  X800--------- 0 1   |
+  XC00--------- 0 0
+  ENHANCED----------- 1
+  COMPATIBLE--------- 0
+
+::
+
+	 IRQ
+
+
+     3 4 5 7 2
+     . . . . .
+     . . . . .
+
+
+There is a DIP-switch with 8 switches, used to set the shared memory address
+to be used. The first 6 switches set the address, the 7th doesn't have any
+function, and the 8th switch is used to select "compatible" or "enhanced".
+When I got my two cards, one of them had this switch set to "enhanced". That
+card didn't work at all, it wasn't even recognized by the driver. The other
+card had this switch set to "compatible" and it behaved absolutely normally. I
+guess that the switch on one of the cards, must have been changed accidentally
+when the card was taken out of its former host. The question remains
+unanswered, what is the purpose of the "enhanced" position?
+
+[Avery's note: "enhanced" probably either disables shared memory (use IO
+ports instead) or disables IO ports (use memory addresses instead).  This
+varies by the type of card involved.  I fail to see how either of these
+enhance anything.  Send me more detailed information about this mode, or
+just use "compatible" mode instead.]
+
+Waterloo Microsystems Inc. ??
+=============================
+
+8-bit card (C) 1985
+-------------------
+  - from Robert Michael Best <rmb117@cs.usask.ca>
+
+[Avery's note: these don't work with my driver for some reason.  These cards
+SEEM to have settings similar to the PDI508Plus, which is
+software-configured and doesn't work with my driver either.  The "Waterloo
+chip" is a boot PROM, probably designed specifically for the University of
+Waterloo.  If you have any further information about this card, please
+e-mail me.]
+
+The probe has not been able to detect the card on any of the J2 settings,
+and I tried them again with the "Waterloo" chip removed.
+
+::
+
+   _____________________________________________________________________
+  | \/  \/              ___  __ __                                      |
+  | C4  C4     |^|     | M ||  ^  ||^|                                  |
+  | --  --     |_|     | 5 ||     || | C3                               |
+  | \/  \/      C10    |___||     ||_|                                  |
+  | C4  C4             _  _ |     |                 ??                  |
+  | --  --            | \/ ||     |                                     |
+  |                   |    ||     |                                     |
+  |                   |    ||  C1 |                                     |
+  |                   |    ||     |  \/                            _____|
+  |                   | C6 ||     |  C9                           |     |___
+  |                   |    ||     |  --                           | BNC |___|
+  |                   |    ||     |          >C7|                 |_____|
+  |                   |    ||     |                                     |
+  | __ __             |____||_____|       1 2 3     6                   |
+  ||  ^  |     >C4|                      |o|o|o|o|o|o| J2    >C4|       |
+  ||     |                               |o|o|o|o|o|o|                  |
+  || C2  |     >C4|                                          >C4|       |
+  ||     |                                   >C8|                       |
+  ||     |       2 3 4 5 6 7  IRQ                            >C4|       |
+  ||_____|      |o|o|o|o|o|o| J3                                        |
+  |_______      |o|o|o|o|o|o|                            _______________|
+	  |                                             |
+	  |_____________________________________________|
+
+  C1 -- "COM9026
+	 SMC 8638"
+	In a chip socket.
+
+  C2 -- "@Copyright
+	 Waterloo Microsystems Inc.
+	 1985"
+	In a chip Socket with info printed on a label covering a round window
+	showing the circuit inside. (The window indicates it is an EPROM chip.)
+
+  C3 -- "COM9032
+	 SMC 8643"
+	In a chip socket.
+
+  C4 -- "74LS"
+	9 total no sockets.
+
+  M5 -- "50006-136
+	 20.000000 MHZ
+	 MTQ-T1-S3
+	 0 M-TRON 86-40"
+	Metallic case with 4 pins, no socket.
+
+  C6 -- "MOSTEK@TC8643
+	 MK6116N-20
+	 MALAYSIA"
+	No socket.
+
+  C7 -- No stamp or label but in a 20 pin chip socket.
+
+  C8 -- "PAL10L8CN
+	 8623"
+	In a 20 pin socket.
+
+  C9 -- "PAl16R4A-2CN
+	 8641"
+	In a 20 pin socket.
+
+  C10 -- "M8640
+	    NMC
+	  9306N"
+	 In an 8 pin socket.
+
+  ?? -- Some components on a smaller board and attached with 20 pins all
+	along the side closest to the BNC connector.  The are coated in a dark
+	resin.
+
+On the board there are two jumper banks labeled J2 and J3. The
+manufacturer didn't put a J1 on the board. The two boards I have both
+came with a jumper box for each bank.
+
+::
+
+  J2 -- Numbered 1 2 3 4 5 6.
+	4 and 5 are not stamped due to solder points.
+
+  J3 -- IRQ 2 3 4 5 6 7
+
+The board itself has a maple leaf stamped just above the irq jumpers
+and "-2 46-86" beside C2. Between C1 and C6 "ASS 'Y 300163" and "@1986
+CORMAN CUSTOM ELECTRONICS CORP." stamped just below the BNC connector.
+Below that "MADE IN CANADA"
+
+No Name
+=======
+
+8-bit cards, 16-bit cards
+-------------------------
+
+  - from Juergen Seifert <seifert@htwm.de>
+
+I have named this ARCnet card "NONAME", since there is no name of any
+manufacturer on the Installation manual nor on the shipping box. The only
+hint to the existence of a manufacturer at all is written in copper,
+it is "Made in Taiwan"
+
+This description has been written by Juergen Seifert <seifert@htwm.de>
+using information from the Original
+
+		    "ARCnet Installation Manual"
+
+::
+
+    ________________________________________________________________
+   | |STAR| BUS| T/P|                                               |
+   | |____|____|____|                                               |
+   |                            _____________________               |
+   |                           |                     |              |
+   |                           |                     |              |
+   |                           |                     |              |
+   |                           |        SMC          |              |
+   |                           |                     |              |
+   |                           |       COM90C65      |              |
+   |                           |                     |              |
+   |                           |                     |              |
+   |                           |__________-__________|              |
+   |                                                           _____|
+   |      _______________                                     |  CN |
+   |     | PROM          |                                    |_____|
+   |     > SOCKET        |                                          |
+   |     |_______________|         1 2 3 4 5 6 7 8  1 2 3 4 5 6 7 8 |
+   |                               _______________  _______________ |
+   |           |o|o|o|o|o|o|o|o|  |      SW1      ||      SW2      ||
+   |           |o|o|o|o|o|o|o|o|  |_______________||_______________||
+   |___         2 3 4 5 7 E E R        Node ID       IOB__|__MEM____|
+       |        \ IRQ   / T T O                      |
+       |__________________1_2_M______________________|
+
+Legend::
+
+  COM90C65:       ARCnet Probe
+  S1  1-8:    Node ID Select
+  S2  1-3:    I/O Base Address Select
+      4-6:    Memory Base Address Select
+      7-8:    RAM Offset Select
+  ET1, ET2    Extended Timeout Select
+  ROM     ROM Enable Select
+  CN              RG62 Coax Connector
+  STAR| BUS | T/P Three fields for placing a sign (colored circle)
+		  indicating the topology of the card
+
+Setting one of the switches to Off means "1", On means "0".
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in group SW1 are used to set the node ID.
+Each node attached to the network must have an unique node ID which
+must be different from 0.
+Switch 8 serves as the least significant bit (LSB).
+
+The node ID is the sum of the values of all switches set to "1"
+These values are::
+
+    Switch | Value
+    -------|-------
+      8    |   1
+      7    |   2
+      6    |   4
+      5    |   8
+      4    |  16
+      3    |  32
+      2    |  64
+      1    | 128
+
+Some Examples::
+
+    Switch         | Hex     | Decimal
+   1 2 3 4 5 6 7 8 | Node ID | Node ID
+   ----------------|---------|---------
+   0 0 0 0 0 0 0 0 |    not allowed
+   0 0 0 0 0 0 0 1 |    1    |    1
+   0 0 0 0 0 0 1 0 |    2    |    2
+   0 0 0 0 0 0 1 1 |    3    |    3
+       . . .       |         |
+   0 1 0 1 0 1 0 1 |   55    |   85
+       . . .       |         |
+   1 0 1 0 1 0 1 0 |   AA    |  170
+       . . .       |         |
+   1 1 1 1 1 1 0 1 |   FD    |  253
+   1 1 1 1 1 1 1 0 |   FE    |  254
+   1 1 1 1 1 1 1 1 |   FF    |  255
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The first three switches in switch group SW2 are used to select one
+of eight possible I/O Base addresses using the following table::
+
+   Switch      | Hex I/O
+    1   2   3  | Address
+   ------------|--------
+   ON  ON  ON  |  260
+   ON  ON  OFF |  290
+   ON  OFF ON  |  2E0  (Manufacturer's default)
+   ON  OFF OFF |  2F0
+   OFF ON  ON  |  300
+   OFF ON  OFF |  350
+   OFF OFF ON  |  380
+   OFF OFF OFF |  3E0
+
+
+Setting the Base Memory (RAM) buffer Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The memory buffer requires 2K of a 16K block of RAM. The base of this
+16K block can be located in any of eight positions.
+Switches 4-6 of switch group SW2 select the Base of the 16K block.
+Within that 16K address space, the buffer may be assigned any one of four
+positions, determined by the offset, switches 7 and 8 of group SW2.
+
+::
+
+   Switch     | Hex RAM | Hex ROM
+   4 5 6  7 8 | Address | Address *)
+   -----------|---------|-----------
+   0 0 0  0 0 |  C0000  |  C2000
+   0 0 0  0 1 |  C0800  |  C2000
+   0 0 0  1 0 |  C1000  |  C2000
+   0 0 0  1 1 |  C1800  |  C2000
+	      |         |
+   0 0 1  0 0 |  C4000  |  C6000
+   0 0 1  0 1 |  C4800  |  C6000
+   0 0 1  1 0 |  C5000  |  C6000
+   0 0 1  1 1 |  C5800  |  C6000
+	      |         |
+   0 1 0  0 0 |  CC000  |  CE000
+   0 1 0  0 1 |  CC800  |  CE000
+   0 1 0  1 0 |  CD000  |  CE000
+   0 1 0  1 1 |  CD800  |  CE000
+	      |         |
+   0 1 1  0 0 |  D0000  |  D2000  (Manufacturer's default)
+   0 1 1  0 1 |  D0800  |  D2000
+   0 1 1  1 0 |  D1000  |  D2000
+   0 1 1  1 1 |  D1800  |  D2000
+	      |         |
+   1 0 0  0 0 |  D4000  |  D6000
+   1 0 0  0 1 |  D4800  |  D6000
+   1 0 0  1 0 |  D5000  |  D6000
+   1 0 0  1 1 |  D5800  |  D6000
+	      |         |
+   1 0 1  0 0 |  D8000  |  DA000
+   1 0 1  0 1 |  D8800  |  DA000
+   1 0 1  1 0 |  D9000  |  DA000
+   1 0 1  1 1 |  D9800  |  DA000
+	      |         |
+   1 1 0  0 0 |  DC000  |  DE000
+   1 1 0  0 1 |  DC800  |  DE000
+   1 1 0  1 0 |  DD000  |  DE000
+   1 1 0  1 1 |  DD800  |  DE000
+	      |         |
+   1 1 1  0 0 |  E0000  |  E2000
+   1 1 1  0 1 |  E0800  |  E2000
+   1 1 1  1 0 |  E1000  |  E2000
+   1 1 1  1 1 |  E1800  |  E2000
+
+   *) To enable the 8K Boot PROM install the jumper ROM.
+      The default is jumper ROM not installed.
+
+
+Setting Interrupt Request Lines (IRQ)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To select a hardware interrupt level set one (only one!) of the jumpers
+IRQ2, IRQ3, IRQ4, IRQ5 or IRQ7. The manufacturer's default is IRQ2.
+
+
+Setting the Timeouts
+^^^^^^^^^^^^^^^^^^^^
+
+The two jumpers labeled ET1 and ET2 are used to determine the timeout
+parameters (response and reconfiguration time). Every node in a network
+must be set to the same timeout values.
+
+::
+
+   ET1 ET2 | Response Time (us) | Reconfiguration Time (ms)
+   --------|--------------------|--------------------------
+   Off Off |        78          |          840   (Default)
+   Off On  |       285          |         1680
+   On  Off |       563          |         1680
+   On  On  |      1130          |         1680
+
+On means jumper installed, Off means jumper not installed
+
+
+16-BIT ARCNET
+-------------
+
+The manual of my 8-Bit NONAME ARCnet Card contains another description
+of a 16-Bit Coax / Twisted Pair Card. This description is incomplete,
+because there are missing two pages in the manual booklet. (The table
+of contents reports pages ... 2-9, 2-11, 2-12, 3-1, ... but inside
+the booklet there is a different way of counting ... 2-9, 2-10, A-1,
+(empty page), 3-1, ..., 3-18, A-1 (again), A-2)
+Also the picture of the board layout is not as good as the picture of
+8-Bit card, because there isn't any letter like "SW1" written to the
+picture.
+
+Should somebody have such a board, please feel free to complete this
+description or to send a mail to me!
+
+This description has been written by Juergen Seifert <seifert@htwm.de>
+using information from the Original
+
+		    "ARCnet Installation Manual"
+
+::
+
+   ___________________________________________________________________
+  <                    _________________  _________________           |
+  >                   |       SW?       ||      SW?        |          |
+  <                   |_________________||_________________|          |
+  >                       ____________________                        |
+  <                      |                    |                       |
+  >                      |                    |                       |
+  <                      |                    |                       |
+  >                      |                    |                       |
+  <                      |                    |                       |
+  >                      |                    |                       |
+  <                      |                    |                       |
+  >                      |____________________|                       |
+  <                                                               ____|
+  >                       ____________________                   |    |
+  <                      |                    |                  | J1 |
+  >                      |                    <                  |    |
+  <                      |____________________|  ? ? ? ? ? ?     |____|
+  >                                             |o|o|o|o|o|o|         |
+  <                                             |o|o|o|o|o|o|         |
+  >                                                                   |
+  <             __                                         ___________|
+  >            |  |                                       |
+  <____________|  |_______________________________________|
+
+
+Setting one of the switches to Off means "1", On means "0".
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in group SW2 are used to set the node ID.
+Each node attached to the network must have an unique node ID which
+must be different from 0.
+Switch 8 serves as the least significant bit (LSB).
+
+The node ID is the sum of the values of all switches set to "1"
+These values are::
+
+    Switch | Value
+    -------|-------
+      8    |   1
+      7    |   2
+      6    |   4
+      5    |   8
+      4    |  16
+      3    |  32
+      2    |  64
+      1    | 128
+
+Some Examples::
+
+    Switch         | Hex     | Decimal
+   1 2 3 4 5 6 7 8 | Node ID | Node ID
+   ----------------|---------|---------
+   0 0 0 0 0 0 0 0 |    not allowed
+   0 0 0 0 0 0 0 1 |    1    |    1
+   0 0 0 0 0 0 1 0 |    2    |    2
+   0 0 0 0 0 0 1 1 |    3    |    3
+       . . .       |         |
+   0 1 0 1 0 1 0 1 |   55    |   85
+       . . .       |         |
+   1 0 1 0 1 0 1 0 |   AA    |  170
+       . . .       |         |
+   1 1 1 1 1 1 0 1 |   FD    |  253
+   1 1 1 1 1 1 1 0 |   FE    |  254
+   1 1 1 1 1 1 1 1 |   FF    |  255
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The first three switches in switch group SW1 are used to select one
+of eight possible I/O Base addresses using the following table::
+
+   Switch      | Hex I/O
+    3   2   1  | Address
+   ------------|--------
+   ON  ON  ON  |  260
+   ON  ON  OFF |  290
+   ON  OFF ON  |  2E0  (Manufacturer's default)
+   ON  OFF OFF |  2F0
+   OFF ON  ON  |  300
+   OFF ON  OFF |  350
+   OFF OFF ON  |  380
+   OFF OFF OFF |  3E0
+
+
+Setting the Base Memory (RAM) buffer Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The memory buffer requires 2K of a 16K block of RAM. The base of this
+16K block can be located in any of eight positions.
+Switches 6-8 of switch group SW1 select the Base of the 16K block.
+Within that 16K address space, the buffer may be assigned any one of four
+positions, determined by the offset, switches 4 and 5 of group SW1::
+
+   Switch     | Hex RAM | Hex ROM
+   8 7 6  5 4 | Address | Address
+   -----------|---------|-----------
+   0 0 0  0 0 |  C0000  |  C2000
+   0 0 0  0 1 |  C0800  |  C2000
+   0 0 0  1 0 |  C1000  |  C2000
+   0 0 0  1 1 |  C1800  |  C2000
+	      |         |
+   0 0 1  0 0 |  C4000  |  C6000
+   0 0 1  0 1 |  C4800  |  C6000
+   0 0 1  1 0 |  C5000  |  C6000
+   0 0 1  1 1 |  C5800  |  C6000
+	      |         |
+   0 1 0  0 0 |  CC000  |  CE000
+   0 1 0  0 1 |  CC800  |  CE000
+   0 1 0  1 0 |  CD000  |  CE000
+   0 1 0  1 1 |  CD800  |  CE000
+	      |         |
+   0 1 1  0 0 |  D0000  |  D2000  (Manufacturer's default)
+   0 1 1  0 1 |  D0800  |  D2000
+   0 1 1  1 0 |  D1000  |  D2000
+   0 1 1  1 1 |  D1800  |  D2000
+	      |         |
+   1 0 0  0 0 |  D4000  |  D6000
+   1 0 0  0 1 |  D4800  |  D6000
+   1 0 0  1 0 |  D5000  |  D6000
+   1 0 0  1 1 |  D5800  |  D6000
+	      |         |
+   1 0 1  0 0 |  D8000  |  DA000
+   1 0 1  0 1 |  D8800  |  DA000
+   1 0 1  1 0 |  D9000  |  DA000
+   1 0 1  1 1 |  D9800  |  DA000
+	      |         |
+   1 1 0  0 0 |  DC000  |  DE000
+   1 1 0  0 1 |  DC800  |  DE000
+   1 1 0  1 0 |  DD000  |  DE000
+   1 1 0  1 1 |  DD800  |  DE000
+	      |         |
+   1 1 1  0 0 |  E0000  |  E2000
+   1 1 1  0 1 |  E0800  |  E2000
+   1 1 1  1 0 |  E1000  |  E2000
+   1 1 1  1 1 |  E1800  |  E2000
+
+
+Setting Interrupt Request Lines (IRQ)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+??????????????????????????????????????
+
+
+Setting the Timeouts
+^^^^^^^^^^^^^^^^^^^^
+
+??????????????????????????????????????
+
+
+8-bit cards ("Made in Taiwan R.O.C.")
+-------------------------------------
+
+  - from Vojtech Pavlik <vojtech@suse.cz>
+
+I have named this ARCnet card "NONAME", since I got only the card with
+no manual at all and the only text identifying the manufacturer is
+"MADE IN TAIWAN R.O.C" printed on the card.
+
+::
+
+	  ____________________________________________________________
+	 |                 1 2 3 4 5 6 7 8                            |
+	 | |o|o| JP1       o|o|o|o|o|o|o|o| ON                        |
+	 |  +              o|o|o|o|o|o|o|o|                        ___|
+	 |  _____________  o|o|o|o|o|o|o|o| OFF         _____     |   | ID7
+	 | |             | SW1                         |     |    |   | ID6
+	 | > RAM (2k)    |        ____________________ |  H  |    | S | ID5
+	 | |_____________|       |                    ||  y  |    | W | ID4
+	 |                       |                    ||  b  |    | 2 | ID3
+	 |                       |                    ||  r  |    |   | ID2
+	 |                       |                    ||  i  |    |   | ID1
+	 |                       |       90C65        ||  d  |    |___| ID0
+	 |      SW3              |                    ||     |        |
+	 | |o|o|o|o|o|o|o|o| ON  |                    ||  I  |        |
+	 | |o|o|o|o|o|o|o|o|     |                    ||  C  |        |
+	 | |o|o|o|o|o|o|o|o| OFF |____________________||     |   _____|
+	 |  1 2 3 4 5 6 7 8                            |     |  |     |___
+	 |  ______________                             |     |  | BNC |___|
+	 | |              |                            |_____|  |_____|
+	 | > EPROM SOCKET |                                           |
+	 | |______________|                                           |
+	 |                                              ______________|
+	 |                                             |
+	 |_____________________________________________|
+
+Legend::
+
+  90C65       ARCNET Chip
+  SW1 1-5:    Base Memory Address Select
+      6-8:    Base I/O Address Select
+  SW2 1-8:    Node ID Select (ID0-ID7)
+  SW3 1-5:    IRQ Select
+      6-7:    Extra Timeout
+      8  :    ROM Enable
+  JP1         Led connector
+  BNC         Coax connector
+
+Although the jumpers SW1 and SW3 are marked SW, not JP, they are jumpers, not
+switches.
+
+Setting the jumpers to ON means connecting the upper two pins, off the bottom
+two - or - in case of IRQ setting, connecting none of them at all.
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in SW2 are used to set the node ID. Each node attached
+to the network must have an unique node ID which must not be 0.
+Switch 1 (ID0) serves as the least significant bit (LSB).
+
+Setting one of the switches to Off means "1", On means "0".
+
+The node ID is the sum of the values of all switches set to "1"
+These values are::
+
+   Switch | Label | Value
+   -------|-------|-------
+     1    | ID0   |   1
+     2    | ID1   |   2
+     3    | ID2   |   4
+     4    | ID3   |   8
+     5    | ID4   |  16
+     6    | ID5   |  32
+     7    | ID6   |  64
+     8    | ID7   | 128
+
+Some Examples::
+
+    Switch         | Hex     | Decimal
+   8 7 6 5 4 3 2 1 | Node ID | Node ID
+   ----------------|---------|---------
+   0 0 0 0 0 0 0 0 |    not allowed
+   0 0 0 0 0 0 0 1 |    1    |    1
+   0 0 0 0 0 0 1 0 |    2    |    2
+   0 0 0 0 0 0 1 1 |    3    |    3
+       . . .       |         |
+   0 1 0 1 0 1 0 1 |   55    |   85
+       . . .       |         |
+   1 0 1 0 1 0 1 0 |   AA    |  170
+       . . .       |         |
+   1 1 1 1 1 1 0 1 |   FD    |  253
+   1 1 1 1 1 1 1 0 |   FE    |  254
+   1 1 1 1 1 1 1 1 |   FF    |  255
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The last three switches in switch block SW1 are used to select one
+of eight possible I/O Base addresses using the following table::
+
+
+   Switch      | Hex I/O
+    6   7   8  | Address
+   ------------|--------
+   ON  ON  ON  |  260
+   OFF ON  ON  |  290
+   ON  OFF ON  |  2E0  (Manufacturer's default)
+   OFF OFF ON  |  2F0
+   ON  ON  OFF |  300
+   OFF ON  OFF |  350
+   ON  OFF OFF |  380
+   OFF OFF OFF |  3E0
+
+
+Setting the Base Memory (RAM) buffer Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The memory buffer (RAM) requires 2K. The base of this buffer can be
+located in any of eight positions. The address of the Boot Prom is
+memory base + 0x2000.
+
+Jumpers 3-5 of jumper block SW1 select the Memory Base address.
+
+::
+
+   Switch              | Hex RAM | Hex ROM
+    1   2   3   4   5  | Address | Address *)
+   --------------------|---------|-----------
+   ON  ON  ON  ON  ON  |  C0000  |  C2000
+   ON  ON  OFF ON  ON  |  C4000  |  C6000
+   ON  ON  ON  OFF ON  |  CC000  |  CE000
+   ON  ON  OFF OFF ON  |  D0000  |  D2000  (Manufacturer's default)
+   ON  ON  ON  ON  OFF |  D4000  |  D6000
+   ON  ON  OFF ON  OFF |  D8000  |  DA000
+   ON  ON  ON  OFF OFF |  DC000  |  DE000
+   ON  ON  OFF OFF OFF |  E0000  |  E2000
+
+  *) To enable the Boot ROM set the jumper 8 of jumper block SW3 to position ON.
+
+The jumpers 1 and 2 probably add 0x0800, 0x1000 and 0x1800 to RAM adders.
+
+Setting the Interrupt Line
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Jumpers 1-5 of the jumper block SW3 control the IRQ level::
+
+    Jumper              |  IRQ
+    1   2   3   4   5   |
+   ----------------------------
+    ON  OFF OFF OFF OFF |  2
+    OFF ON  OFF OFF OFF |  3
+    OFF OFF ON  OFF OFF |  4
+    OFF OFF OFF ON  OFF |  5
+    OFF OFF OFF OFF ON  |  7
+
+
+Setting the Timeout Parameters
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The jumpers 6-7 of the jumper block SW3 are used to determine the timeout
+parameters. These two jumpers are normally left in the OFF position.
+
+
+
+(Generic Model 9058)
+--------------------
+  - from Andrew J. Kroll <ag784@freenet.buffalo.edu>
+  - Sorry this sat in my to-do box for so long, Andrew! (yikes - over a
+    year!)
+
+::
+
+								      _____
+								     |    <
+								     | .---'
+    ________________________________________________________________ | |
+   |                           |     SW2     |                      |  |
+   |   ___________             |_____________|                      |  |
+   |  |           |              1 2 3 4 5 6                     ___|  |
+   |  >  6116 RAM |         _________                         8 |   |  |
+   |  |___________|        |20MHzXtal|                        7 |   |  |
+   |                       |_________|       __________       6 | S |  |
+   |    74LS373                             |          |-     5 | W |  |
+   |   _________                            |      E   |-     4 |   |  |
+   |   >_______|              ______________|..... P   |-     3 | 3 |  |
+   |                         |              |    : O   |-     2 |   |  |
+   |                         |              |    : X   |-     1 |___|  |
+   |   ________________      |              |    : Y   |-           |  |
+   |  |      SW1       |     |      SL90C65 |    :     |-           |  |
+   |  |________________|     |              |    : B   |-           |  |
+   |    1 2 3 4 5 6 7 8      |              |    : O   |-           |  |
+   |                         |_________o____|..../ A   |-    _______|  |
+   |    ____________________                |      R   |-   |       |------,
+   |   |                    |               |      D   |-   |  BNC  |   #  |
+   |   > 2764 PROM SOCKET   |               |__________|-   |_______|------'
+   |   |____________________|              _________                |  |
+   |                                       >________| <- 74LS245    |  |
+   |                                                                |  |
+   |___                                               ______________|  |
+       |H H H H H H H H H H H H H H H H H H H H H H H|               | |
+       |U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U|               | |
+								      \|
+
+Legend::
+
+  SL90C65 	ARCNET Controller / Transceiver /Logic
+  SW1	1-5:	IRQ Select
+	  6:	ET1
+	  7:	ET2
+	  8:	ROM ENABLE
+  SW2	1-3:    Memory Buffer/PROM Address
+	3-6:	I/O Address Map
+  SW3	1-8:	Node ID Select
+  BNC		BNC RG62/U Connection
+		*I* have had success using RG59B/U with *NO* terminators!
+		What gives?!
+
+SW1: Timeouts, Interrupt and ROM
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To select a hardware interrupt level set one (only one!) of the dip switches
+up (on) SW1...(switches 1-5)
+IRQ3, IRQ4, IRQ5, IRQ7, IRQ2. The Manufacturer's default is IRQ2.
+
+The switches on SW1 labeled EXT1 (switch 6) and EXT2 (switch 7)
+are used to determine the timeout parameters. These two dip switches
+are normally left off (down).
+
+   To enable the 8K Boot PROM position SW1 switch 8 on (UP) labeled ROM.
+   The default is jumper ROM not installed.
+
+
+Setting the I/O Base Address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The last three switches in switch group SW2 are used to select one
+of eight possible I/O Base addresses using the following table::
+
+
+   Switch | Hex I/O
+   4 5 6  | Address
+   -------|--------
+   0 0 0  |  260
+   0 0 1  |  290
+   0 1 0  |  2E0  (Manufacturer's default)
+   0 1 1  |  2F0
+   1 0 0  |  300
+   1 0 1  |  350
+   1 1 0  |  380
+   1 1 1  |  3E0
+
+
+Setting the Base Memory Address (RAM & ROM)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The memory buffer requires 2K of a 16K block of RAM. The base of this
+16K block can be located in any of eight positions.
+Switches 1-3 of switch group SW2 select the Base of the 16K block.
+(0 = DOWN, 1 = UP)
+I could, however, only verify two settings...
+
+
+::
+
+   Switch| Hex RAM | Hex ROM
+   1 2 3 | Address | Address
+   ------|---------|-----------
+   0 0 0 |  E0000  |  E2000
+   0 0 1 |  D0000  |  D2000  (Manufacturer's default)
+   0 1 0 |  ?????  |  ?????
+   0 1 1 |  ?????  |  ?????
+   1 0 0 |  ?????  |  ?????
+   1 0 1 |  ?????  |  ?????
+   1 1 0 |  ?????  |  ?????
+   1 1 1 |  ?????  |  ?????
+
+
+Setting the Node ID
+^^^^^^^^^^^^^^^^^^^
+
+The eight switches in group SW3 are used to set the node ID.
+Each node attached to the network must have an unique node ID which
+must be different from 0.
+Switch 1 serves as the least significant bit (LSB).
+switches in the DOWN position are OFF (0) and in the UP position are ON (1)
+
+The node ID is the sum of the values of all switches set to "1"
+These values are::
+
+    Switch | Value
+    -------|-------
+      1    |   1
+      2    |   2
+      3    |   4
+      4    |   8
+      5    |  16
+      6    |  32
+      7    |  64
+      8    | 128
+
+Some Examples::
+
+      Switch#     |   Hex   | Decimal
+  8 7 6 5 4 3 2 1 | Node ID | Node ID
+  ----------------|---------|---------
+  0 0 0 0 0 0 0 0 |    not allowed  <-.
+  0 0 0 0 0 0 0 1 |    1    |    1    |
+  0 0 0 0 0 0 1 0 |    2    |    2    |
+  0 0 0 0 0 0 1 1 |    3    |    3    |
+      . . .       |         |         |
+  0 1 0 1 0 1 0 1 |   55    |   85    |
+      . . .       |         |         + Don't use 0 or 255!
+  1 0 1 0 1 0 1 0 |   AA    |  170    |
+      . . .       |         |         |
+  1 1 1 1 1 1 0 1 |   FD    |  253    |
+  1 1 1 1 1 1 1 0 |   FE    |  254    |
+  1 1 1 1 1 1 1 1 |   FF    |  255  <-'
+
+
+Tiara
+=====
+
+(model unknown)
+---------------
+
+  - from Christoph Lameter <christoph@lameter.com>
+
+
+Here is information about my card as far as I could figure it out::
+
+
+  ----------------------------------------------- tiara
+  Tiara LanCard of Tiara Computer Systems.
+
+  +----------------------------------------------+
+  !           ! Transmitter Unit !               !
+  !           +------------------+             -------
+  !          MEM                              Coax Connector
+  !  ROM    7654321 <- I/O                     -------
+  !  :  :   +--------+                           !
+  !  :  :   ! 90C66LJ!                         +++
+  !  :  :   !        !                         !D  Switch to set
+  !  :  :   !        !                         !I  the Nodenumber
+  !  :  :   +--------+                         !P
+  !                                            !++
+  !         234567 <- IRQ                      !
+  +------------!!!!!!!!!!!!!!!!!!!!!!!!--------+
+	       !!!!!!!!!!!!!!!!!!!!!!!!
+
+- 0 = Jumper Installed
+- 1 = Open
+
+Top Jumper line Bit 7 = ROM Enable 654=Memory location 321=I/O
+
+Settings for Memory Location (Top Jumper Line)
+
+===     ================
+456     Address selected
+===     ================
+000	C0000
+001     C4000
+010     CC000
+011     D0000
+100     D4000
+101     D8000
+110     DC000
+111     E0000
+===     ================
+
+Settings for I/O Address (Top Jumper Line)
+
+===     ====
+123     Port
+===     ====
+000	260
+001	290
+010	2E0
+011	2F0
+100	300
+101	350
+110	380
+111	3E0
+===     ====
+
+Settings for IRQ Selection (Lower Jumper Line)
+
+====== =====
+234567
+====== =====
+011111 IRQ 2
+101111 IRQ 3
+110111 IRQ 4
+111011 IRQ 5
+111110 IRQ 7
+====== =====
+
+Other Cards
+===========
+
+I have no information on other models of ARCnet cards at the moment.  Please
+send any and all info to:
+
+	apenwarr@worldvisions.ca
+
+Thanks.
diff --git a/Documentation/networking/arcnet-hardware.txt b/Documentation/networking/arcnet-hardware.txt
deleted file mode 100644
index 731de411513c..000000000000
--- a/Documentation/networking/arcnet-hardware.txt
+++ /dev/null
@@ -1,3133 +0,0 @@
- 
------------------------------------------------------------------------------
-1) This file is a supplement to arcnet.txt.  Please read that for general
-   driver configuration help.
------------------------------------------------------------------------------
-2) This file is no longer Linux-specific.  It should probably be moved out of
-   the kernel sources.  Ideas?
------------------------------------------------------------------------------
-
-Because so many people (myself included) seem to have obtained ARCnet cards
-without manuals, this file contains a quick introduction to ARCnet hardware,
-some cabling tips, and a listing of all jumper settings I can find. Please
-e-mail apenwarr@worldvisions.ca with any settings for your particular card,
-or any other information you have!
-
-
-INTRODUCTION TO ARCNET
-----------------------
-
-ARCnet is a network type which works in a way similar to popular Ethernet
-networks but which is also different in some very important ways.
-
-First of all, you can get ARCnet cards in at least two speeds: 2.5 Mbps
-(slower than Ethernet) and 100 Mbps (faster than normal Ethernet).  In fact,
-there are others as well, but these are less common.  The different hardware
-types, as far as I'm aware, are not compatible and so you cannot wire a
-100 Mbps card to a 2.5 Mbps card, and so on.  From what I hear, my driver does
-work with 100 Mbps cards, but I haven't been able to verify this myself,
-since I only have the 2.5 Mbps variety.  It is probably not going to saturate
-your 100 Mbps card.  Stop complaining. :)
-
-You also cannot connect an ARCnet card to any kind of Ethernet card and
-expect it to work.  
-
-There are two "types" of ARCnet - STAR topology and BUS topology.  This
-refers to how the cards are meant to be wired together.  According to most
-available documentation, you can only connect STAR cards to STAR cards and
-BUS cards to BUS cards.  That makes sense, right?  Well, it's not quite
-true; see below under "Cabling."
-
-Once you get past these little stumbling blocks, ARCnet is actually quite a
-well-designed standard.  It uses something called "modified token passing"
-which makes it completely incompatible with so-called "Token Ring" cards,
-but which makes transfers much more reliable than Ethernet does.  In fact,
-ARCnet will guarantee that a packet arrives safely at the destination, and
-even if it can't possibly be delivered properly (ie. because of a cable
-break, or because the destination computer does not exist) it will at least
-tell the sender about it.
-
-Because of the carefully defined action of the "token", it will always make
-a pass around the "ring" within a maximum length of time.  This makes it
-useful for realtime networks.
-
-In addition, all known ARCnet cards have an (almost) identical programming
-interface.  This means that with one ARCnet driver you can support any
-card, whereas with Ethernet each manufacturer uses what is sometimes a
-completely different programming interface, leading to a lot of different,
-sometimes very similar, Ethernet drivers.  Of course, always using the same
-programming interface also means that when high-performance hardware
-facilities like PCI bus mastering DMA appear, it's hard to take advantage of
-them.  Let's not go into that.
-
-One thing that makes ARCnet cards difficult to program for, however, is the
-limit on their packet sizes; standard ARCnet can only send packets that are
-up to 508 bytes in length.  This is smaller than the Internet "bare minimum"
-of 576 bytes, let alone the Ethernet MTU of 1500.  To compensate, an extra
-level of encapsulation is defined by RFC1201, which I call "packet
-splitting," that allows "virtual packets" to grow as large as 64K each,
-although they are generally kept down to the Ethernet-style 1500 bytes.
-
-For more information on the advantages and disadvantages (mostly the
-advantages) of ARCnet networks, you might try the "ARCnet Trade Association"
-WWW page:
-	http://www.arcnet.com
-
-
-CABLING ARCNET NETWORKS
------------------------
-
-This section was rewritten by 
-        Vojtech Pavlik     <vojtech@suse.cz>
-using information from several people, including:
-        Avery Pennraun     <apenwarr@worldvisions.ca>
- 	Stephen A. Wood    <saw@hallc1.cebaf.gov>
- 	John Paul Morrison <jmorriso@bogomips.ee.ubc.ca>
- 	Joachim Koenig     <jojo@repas.de>
-and Avery touched it up a bit, at Vojtech's request.
-
-ARCnet (the classic 2.5 Mbps version) can be connected by two different
-types of cabling: coax and twisted pair.  The other ARCnet-type networks
-(100 Mbps TCNS and 320 kbps - 32 Mbps ARCnet Plus) use different types of
-cabling (Type1, Fiber, C1, C4, C5).
-
-For a coax network, you "should" use 93 Ohm RG-62 cable.  But other cables
-also work fine, because ARCnet is a very stable network. I personally use 75
-Ohm TV antenna cable.
-
-Cards for coax cabling are shipped in two different variants: for BUS and
-STAR network topologies.  They are mostly the same.  The only difference
-lies in the hybrid chip installed.  BUS cards use high impedance output,
-while STAR use low impedance.  Low impedance card (STAR) is electrically
-equal to a high impedance one with a terminator installed.
-
-Usually, the ARCnet networks are built up from STAR cards and hubs.  There
-are two types of hubs - active and passive.  Passive hubs are small boxes
-with four BNC connectors containing four 47 Ohm resistors:
-
-   |         | wires
-   R         + junction
--R-+-R-      R 47 Ohm resistors
-   R
-   |
-
-The shielding is connected together.  Active hubs are much more complicated;
-they are powered and contain electronics to amplify the signal and send it
-to other segments of the net.  They usually have eight connectors.  Active
-hubs come in two variants - dumb and smart.  The dumb variant just
-amplifies, but the smart one decodes to digital and encodes back all packets
-coming through.  This is much better if you have several hubs in the net,
-since many dumb active hubs may worsen the signal quality.
-
-And now to the cabling.  What you can connect together:
-
-1. A card to a card.  This is the simplest way of creating a 2-computer
-   network.
-
-2. A card to a passive hub.  Remember that all unused connectors on the hub
-   must be properly terminated with 93 Ohm (or something else if you don't
-   have the right ones) terminators.
-   	(Avery's note: oops, I didn't know that.  Mine (TV cable) works
-	anyway, though.)
-
-3. A card to an active hub.  Here is no need to terminate the unused
-   connectors except some kind of aesthetic feeling.  But, there may not be
-   more than eleven active hubs between any two computers.  That of course
-   doesn't limit the number of active hubs on the network.
-   
-4. An active hub to another.
-
-5. An active hub to passive hub.
-
-Remember that you cannot connect two passive hubs together.  The power loss
-implied by such a connection is too high for the net to operate reliably.
-
-An example of a typical ARCnet network:
-
-           R                     S - STAR type card              
-    S------H--------A-------S    R - Terminator
-           |        |            H - Hub                         
-           |        |            A - Active hub                  
-           |   S----H----S                                       
-           S        |                                            
-                    |                                            
-                    S                                            
-                                                                          
-The BUS topology is very similar to the one used by Ethernet.  The only
-difference is in cable and terminators: they should be 93 Ohm.  Ethernet
-uses 50 Ohm impedance. You use T connectors to put the computers on a single
-line of cable, the bus. You have to put terminators at both ends of the
-cable. A typical BUS ARCnet network looks like:
-
-    RT----T------T------T------T------TR
-     B    B      B      B      B      B
-
-  B - BUS type card
-  R - Terminator
-  T - T connector
-
-But that is not all! The two types can be connected together.  According to
-the official documentation the only way of connecting them is using an active
-hub:
-
-         A------T------T------TR
-         |      B      B      B
-     S---H---S
-         |
-         S
-
-The official docs also state that you can use STAR cards at the ends of
-BUS network in place of a BUS card and a terminator:
-
-     S------T------T------S
-            B      B
-
-But, according to my own experiments, you can simply hang a BUS type card
-anywhere in middle of a cable in a STAR topology network.  And more - you
-can use the bus card in place of any star card if you use a terminator. Then
-you can build very complicated networks fulfilling all your needs!  An
-example:
-
-                                  S
-                                  |
-           RT------T-------T------H------S
-            B      B       B      |
-                                  |       R
-    S------A------T-------T-------A-------H------TR                    
-           |      B       B       |       |      B                         
-           |   S                 BT       |                                 
-           |   |                  |  S----A-----S
-    S------H---A----S             |       | 
-           |   |      S------T----H---S   |
-           S   S             B    R       S  
-                                                               
-A basically different cabling scheme is used with Twisted Pair cabling. Each
-of the TP cards has two RJ (phone-cord style) connectors.  The cards are
-then daisy-chained together using a cable connecting every two neighboring
-cards.  The ends are terminated with RJ 93 Ohm terminators which plug into
-the empty connectors of cards on the ends of the chain.  An example:
-
-          ___________   ___________
-      _R_|_         _|_|_         _|_R_  
-     |     |       |     |       |     |      
-     |Card |       |Card |       |Card |     
-     |_____|       |_____|       |_____|          
-
-
-There are also hubs for the TP topology.  There is nothing difficult
-involved in using them; you just connect a TP chain to a hub on any end or
-even at both.  This way you can create almost any network configuration. 
-The maximum of 11 hubs between any two computers on the net applies here as
-well.  An example:
-
-    RP-------P--------P--------H-----P------P-----PR
-                               |
-      RP-----H--------P--------H-----P------PR
-             |                 |
-             PR                PR
-
-    R - RJ Terminator
-    P - TP Card
-    H - TP Hub
-
-Like any network, ARCnet has a limited cable length.  These are the maximum
-cable lengths between two active ends (an active end being an active hub or
-a STAR card).
-
-		RG-62       93 Ohm up to 650 m
-		RG-59/U     75 Ohm up to 457 m
-		RG-11/U     75 Ohm up to 533 m
-		IBM Type 1 150 Ohm up to 200 m
-		IBM Type 3 100 Ohm up to 100 m
-
-The maximum length of all cables connected to a passive hub is limited to 65
-meters for RG-62 cabling; less for others.  You can see that using passive
-hubs in a large network is a bad idea. The maximum length of a single "BUS
-Trunk" is about 300 meters for RG-62. The maximum distance between the two
-most distant points of the net is limited to 3000 meters. The maximum length
-of a TP cable between two cards/hubs is 650 meters.
-
-
-SETTING THE JUMPERS
--------------------
-
-All ARCnet cards should have a total of four or five different settings:
-
-  - the I/O address:  this is the "port" your ARCnet card is on.  Probed
-    values in the Linux ARCnet driver are only from 0x200 through 0x3F0. (If
-    your card has additional ones, which is possible, please tell me.) This
-    should not be the same as any other device on your system.  According to
-    a doc I got from Novell, MS Windows prefers values of 0x300 or more,
-    eating net connections on my system (at least) otherwise.  My guess is
-    this may be because, if your card is at 0x2E0, probing for a serial port
-    at 0x2E8 will reset the card and probably mess things up royally.
-	- Avery's favourite: 0x300.
-
-  - the IRQ: on  8-bit cards, it might be 2 (9), 3, 4, 5, or 7.
-             on 16-bit cards, it might be 2 (9), 3, 4, 5, 7, or 10-15.
-             
-    Make sure this is different from any other card on your system.  Note
-    that IRQ2 is the same as IRQ9, as far as Linux is concerned.  You can
-    "cat /proc/interrupts" for a somewhat complete list of which ones are in
-    use at any given time.  Here is a list of common usages from Vojtech
-    Pavlik <vojtech@suse.cz>:
-    	("Not on bus" means there is no way for a card to generate this
-	interrupt)
-	IRQ  0 - Timer 0 (Not on bus)
-	IRQ  1 - Keyboard (Not on bus)
-	IRQ  2 - IRQ Controller 2 (Not on bus, nor does interrupt the CPU)
-	IRQ  3 - COM2
-	IRQ  4 - COM1
-	IRQ  5 - FREE (LPT2 if you have it; sometimes COM3; maybe PLIP)
-	IRQ  6 - Floppy disk controller
-	IRQ  7 - FREE (LPT1 if you don't use the polling driver; PLIP) 
-	IRQ  8 - Realtime Clock Interrupt (Not on bus)
-	IRQ  9 - FREE (VGA vertical sync interrupt if enabled)
-	IRQ 10 - FREE
-	IRQ 11 - FREE
-	IRQ 12 - FREE
-	IRQ 13 - Numeric Coprocessor (Not on bus)
-	IRQ 14 - Fixed Disk Controller
-	IRQ 15 - FREE (Fixed Disk Controller 2 if you have it) 
-	
-	Note: IRQ 9 is used on some video cards for the "vertical retrace"
-	interrupt.  This interrupt would have been handy for things like
-	video games, as it occurs exactly once per screen refresh, but
-	unfortunately IBM cancelled this feature starting with the original
-	VGA and thus many VGA/SVGA cards do not support it.  For this
-	reason, no modern software uses this interrupt and it can almost
-	always be safely disabled, if your video card supports it at all.
-	
-	If your card for some reason CANNOT disable this IRQ (usually there
-	is a jumper), one solution would be to clip the printed circuit
-	contact on the board: it's the fourth contact from the left on the
-	back side.  I take no responsibility if you try this.
-
-	- Avery's favourite: IRQ2 (actually IRQ9).  Watch that VGA, though.
-
-  - the memory address:  Unlike most cards, ARCnets use "shared memory" for
-    copying buffers around.  Make SURE it doesn't conflict with any other
-    used memory in your system!
-	A0000		- VGA graphics memory (ok if you don't have VGA)
-        B0000		- Monochrome text mode
-        C0000		\  One of these is your VGA BIOS - usually C0000.
-        E0000		/
-        F0000		- System BIOS
-
-    Anything less than 0xA0000 is, well, a BAD idea since it isn't above
-    640k.
-	- Avery's favourite: 0xD0000
-
-  - the station address:  Every ARCnet card has its own "unique" network
-    address from 0 to 255.  Unlike Ethernet, you can set this address
-    yourself with a jumper or switch (or on some cards, with special
-    software).  Since it's only 8 bits, you can only have 254 ARCnet cards
-    on a network.  DON'T use 0 or 255, since these are reserved (although
-    neat stuff will probably happen if you DO use them).  By the way, if you
-    haven't already guessed, don't set this the same as any other ARCnet on
-    your network!
-	- Avery's favourite:  3 and 4.  Not that it matters.
-
-  - There may be ETS1 and ETS2 settings.  These may or may not make a
-    difference on your card (many manuals call them "reserved"), but are
-    used to change the delays used when powering up a computer on the
-    network.  This is only necessary when wiring VERY long range ARCnet
-    networks, on the order of 4km or so; in any case, the only real
-    requirement here is that all cards on the network with ETS1 and ETS2
-    jumpers have them in the same position.  Chris Hindy <chrish@io.org>
-    sent in a chart with actual values for this:
-	ET1	ET2	Response Time	Reconfiguration Time
-	---	---	-------------	--------------------
-	open	open	74.7us		840us
-	open	closed	283.4us		1680us
-	closed	open	561.8us		1680us
-	closed	closed	1118.6us	1680us
-    
-    Make sure you set ETS1 and ETS2 to the SAME VALUE for all cards on your
-    network.
-    
-Also, on many cards (not mine, though) there are red and green LED's. 
-Vojtech Pavlik <vojtech@suse.cz> tells me this is what they mean:
-	GREEN           RED             Status
-	-----		---		------
-	OFF             OFF             Power off
-	OFF             Short flashes   Cabling problems (broken cable or not
-					  terminated)
-	OFF (short)     ON              Card init
-	ON              ON              Normal state - everything OK, nothing
-					  happens
-	ON              Long flashes    Data transfer
-	ON              OFF             Never happens (maybe when wrong ID)
-
-
-The following is all the specific information people have sent me about
-their own particular ARCnet cards.  It is officially a mess, and contains
-huge amounts of duplicated information.  I have no time to fix it.  If you
-want to, PLEASE DO!  Just send me a 'diff -u' of all your changes.
-
-The model # is listed right above specifics for that card, so you should be
-able to use your text viewer's "search" function to find the entry you want. 
-If you don't KNOW what kind of card you have, try looking through the
-various diagrams to see if you can tell.
-
-If your model isn't listed and/or has different settings, PLEASE PLEASE
-tell me.  I had to figure mine out without the manual, and it WASN'T FUN!
-
-Even if your ARCnet model isn't listed, but has the same jumpers as another
-model that is, please e-mail me to say so.
-
-Cards Listed in this file (in this order, mostly):
-
-	Manufacturer	Model #			Bits
-	------------	-------			----
-	SMC		PC100			8
-	SMC		PC110			8
-	SMC		PC120			8
-	SMC		PC130			8
-	SMC		PC270E			8
-	SMC		PC500			16
-	SMC		PC500Longboard		16
-	SMC		PC550Longboard		16
-	SMC		PC600			16
-	SMC		PC710			8
-	SMC?		LCS-8830(-T)		8/16
-	Puredata	PDI507			8
-	CNet Tech	CN120-Series		8
-	CNet Tech	CN160-Series		16
-	Lantech?	UM9065L chipset		8
-	Acer		5210-003		8
-	Datapoint?	LAN-ARC-8		8
-	Topware		TA-ARC/10		8
-	Thomas-Conrad	500-6242-0097 REV A	8
-	Waterloo?	(C)1985 Waterloo Micro. 8
-	No Name		--			8/16
-	No Name		Taiwan R.O.C?		8
-	No Name		Model 9058		8
-	Tiara		Tiara Lancard?		8
-	
-
-** SMC = Standard Microsystems Corp.
-** CNet Tech = CNet Technology, Inc.
-
-
-Unclassified Stuff
-------------------
-  - Please send any other information you can find.
-  
-  - And some other stuff (more info is welcome!):
-     From: root@ultraworld.xs4all.nl (Timo Hilbrink)
-     To: apenwarr@foxnet.net (Avery Pennarun)
-     Date: Wed, 26 Oct 1994 02:10:32 +0000 (GMT)
-     Reply-To: timoh@xs4all.nl
-
-     [...parts deleted...]
-
-     About the jumpers: On my PC130 there is one more jumper, located near the
-     cable-connector and it's for changing to star or bus topology; 
-     closed: star - open: bus
-     On the PC500 are some more jumper-pins, one block labeled with RX,PDN,TXI
-     and another with ALE,LA17,LA18,LA19 these are undocumented..
-
-     [...more parts deleted...]
-
-     --- CUT ---
-
-
-** Standard Microsystems Corp (SMC) **
-PC100, PC110, PC120, PC130 (8-bit cards)
-PC500, PC600 (16-bit cards)
----------------------------------
-  - mainly from Avery Pennarun <apenwarr@worldvisions.ca>.  Values depicted
-    are from Avery's setup.
-  - special thanks to Timo Hilbrink <timoh@xs4all.nl> for noting that PC120,
-    130, 500, and 600 all have the same switches as Avery's PC100. 
-    PC500/600 have several extra, undocumented pins though. (?)
-  - PC110 settings were verified by Stephen A. Wood <saw@cebaf.gov>
-  - Also, the JP- and S-numbers probably don't match your card exactly.  Try
-    to find jumpers/switches with the same number of settings - it's
-    probably more reliable.
-  
-
-     JP5		       [|]    :    :    :    :
-(IRQ Setting)		      IRQ2  IRQ3 IRQ4 IRQ5 IRQ7
-		Put exactly one jumper on exactly one set of pins.
-
-
-                          1  2   3  4  5  6   7  8  9 10
-     S1                /----------------------------------\
-(I/O and Memory        |  1  1 * 0  0  0  0 * 1  1  0  1  |
- addresses)            \----------------------------------/
-                          |--|   |--------|   |--------|
-                          (a)       (b)           (m)
-                          
-                WARNING.  It's very important when setting these which way
-                you're holding the card, and which way you think is '1'!
-                
-                If you suspect that your settings are not being made
-		correctly, try reversing the direction or inverting the
-		switch positions.
-
-		a: The first digit of the I/O address.
-			Setting		Value
-			-------		-----
-			00		0
-			01		1
-			10		2
-			11		3
-
-		b: The second digit of the I/O address.
-			Setting		Value
-			-------		-----
-			0000		0
-			0001		1
-			0010		2
-			...		...
-			1110		E
-			1111		F
-
-		The I/O address is in the form ab0.  For example, if
-		a is 0x2 and b is 0xE, the address will be 0x2E0.
-
-		DO NOT SET THIS LESS THAN 0x200!!!!!
-
-
-		m: The first digit of the memory address.
-			Setting		Value
-			-------		-----
-			0000		0
-			0001		1
-			0010		2
-			...		...
-			1110		E
-			1111		F
-
-		The memory address is in the form m0000.  For example, if
-		m is D, the address will be 0xD0000.
-
-		DO NOT SET THIS TO C0000, F0000, OR LESS THAN A0000!
-
-                          1  2  3  4  5  6  7  8
-     S2                /--------------------------\
-(Station Address)      |  1  1  0  0  0  0  0  0  |
-                       \--------------------------/
-
-			Setting		Value
-			-------		-----
-			00000000	00
-			10000000	01
-			01000000	02
-			...
-			01111111	FE
-			11111111	FF
-
-		Note that this is binary with the digits reversed!
-
-		DO NOT SET THIS TO 0 OR 255 (0xFF)!
-
-
-*****************************************************************************
-
-** Standard Microsystems Corp (SMC) **
-PC130E/PC270E (8-bit cards)
----------------------------
-  - from Juergen Seifert <seifert@htwm.de>
-
-
-STANDARD MICROSYSTEMS CORPORATION (SMC) ARCNET(R)-PC130E/PC270E
-===============================================================
-
-This description has been written by Juergen Seifert <seifert@htwm.de>
-using information from the following Original SMC Manual 
-
-             "Configuration Guide for
-             ARCNET(R)-PC130E/PC270
-            Network Controller Boards
-                Pub. # 900.044A
-                   June, 1989"
-
-ARCNET is a registered trademark of the Datapoint Corporation
-SMC is a registered trademark of the Standard Microsystems Corporation  
-
-The PC130E is an enhanced version of the PC130 board, is equipped with a 
-standard BNC female connector for connection to RG-62/U coax cable.
-Since this board is designed both for point-to-point connection in star
-networks and for connection to bus networks, it is downwardly compatible 
-with all the other standard boards designed for coax networks (that is,
-the PC120, PC110 and PC100 star topology boards and the PC220, PC210 and 
-PC200 bus topology boards).
-
-The PC270E is an enhanced version of the PC260 board, is equipped with two 
-modular RJ11-type jacks for connection to twisted pair wiring.
-It can be used in a star or a daisy-chained network.
-
-
-         8 7 6 5 4 3 2 1
-    ________________________________________________________________
-   |   |       S1        |                                          |
-   |   |_________________|                                          |
-   |    Offs|Base |I/O Addr                                         |
-   |     RAM Addr |                                              ___|
-   |         ___  ___                                       CR3 |___|
-   |        |   \/   |                                      CR4 |___|
-   |        |  PROM  |                                           ___|
-   |        |        |                                        N |   | 8
-   |        | SOCKET |                                        o |   | 7
-   |        |________|                                        d |   | 6
-   |                   ___________________                    e |   | 5
-   |                  |                   |                   A | S | 4
-   |       |oo| EXT2  |                   |                   d | 2 | 3
-   |       |oo| EXT1  |       SMC         |                   d |   | 2
-   |       |oo| ROM   |      90C63        |                   r |___| 1
-   |       |oo| IRQ7  |                   |               |o|  _____|
-   |       |oo| IRQ5  |                   |               |o| | J1  |
-   |       |oo| IRQ4  |                   |              STAR |_____|
-   |       |oo| IRQ3  |                   |                   | J2  |
-   |       |oo| IRQ2  |___________________|                   |_____|
-   |___                                               ______________|
-       |                                             |
-       |_____________________________________________|
-
-Legend:
-
-SMC 90C63	ARCNET Controller / Transceiver /Logic
-S1	1-3:	I/O Base Address Select
-	4-6:	Memory Base Address Select
-	7-8:	RAM Offset Select
-S2	1-8:	Node ID Select
-EXT		Extended Timeout Select
-ROM		ROM Enable Select
-STAR		Selected - Star Topology	(PC130E only)
-		Deselected - Bus Topology	(PC130E only)
-CR3/CR4		Diagnostic LEDs
-J1		BNC RG62/U Connector		(PC130E only)
-J1		6-position Telephone Jack	(PC270E only)
-J2		6-position Telephone Jack	(PC270E only)
-
-Setting one of the switches to Off/Open means "1", On/Closed means "0".
-
-
-Setting the Node ID
--------------------
-
-The eight switches in group S2 are used to set the node ID.
-These switches work in a way similar to the PC100-series cards; see that
-entry for more information.
-
-
-Setting the I/O Base Address
-----------------------------
-
-The first three switches in switch group S1 are used to select one
-of eight possible I/O Base addresses using the following table
-
-
-   Switch | Hex I/O
-   1 2 3  | Address
-   -------|--------
-   0 0 0  |  260
-   0 0 1  |  290
-   0 1 0  |  2E0  (Manufacturer's default)
-   0 1 1  |  2F0
-   1 0 0  |  300
-   1 0 1  |  350
-   1 1 0  |  380
-   1 1 1  |  3E0
-
-
-Setting the Base Memory (RAM) buffer Address
---------------------------------------------
-
-The memory buffer requires 2K of a 16K block of RAM. The base of this
-16K block can be located in any of eight positions.
-Switches 4-6 of switch group S1 select the Base of the 16K block.
-Within that 16K address space, the buffer may be assigned any one of four 
-positions, determined by the offset, switches 7 and 8 of group S1.
-
-   Switch     | Hex RAM | Hex ROM
-   4 5 6  7 8 | Address | Address *)
-   -----------|---------|-----------
-   0 0 0  0 0 |  C0000  |  C2000
-   0 0 0  0 1 |  C0800  |  C2000
-   0 0 0  1 0 |  C1000  |  C2000
-   0 0 0  1 1 |  C1800  |  C2000
-              |         |
-   0 0 1  0 0 |  C4000  |  C6000
-   0 0 1  0 1 |  C4800  |  C6000
-   0 0 1  1 0 |  C5000  |  C6000
-   0 0 1  1 1 |  C5800  |  C6000
-              |         |
-   0 1 0  0 0 |  CC000  |  CE000
-   0 1 0  0 1 |  CC800  |  CE000
-   0 1 0  1 0 |  CD000  |  CE000
-   0 1 0  1 1 |  CD800  |  CE000
-              |         |
-   0 1 1  0 0 |  D0000  |  D2000  (Manufacturer's default)
-   0 1 1  0 1 |  D0800  |  D2000
-   0 1 1  1 0 |  D1000  |  D2000
-   0 1 1  1 1 |  D1800  |  D2000
-              |         |
-   1 0 0  0 0 |  D4000  |  D6000
-   1 0 0  0 1 |  D4800  |  D6000
-   1 0 0  1 0 |  D5000  |  D6000
-   1 0 0  1 1 |  D5800  |  D6000
-              |         |
-   1 0 1  0 0 |  D8000  |  DA000
-   1 0 1  0 1 |  D8800  |  DA000
-   1 0 1  1 0 |  D9000  |  DA000
-   1 0 1  1 1 |  D9800  |  DA000
-              |         |
-   1 1 0  0 0 |  DC000  |  DE000
-   1 1 0  0 1 |  DC800  |  DE000
-   1 1 0  1 0 |  DD000  |  DE000
-   1 1 0  1 1 |  DD800  |  DE000
-              |         |
-   1 1 1  0 0 |  E0000  |  E2000
-   1 1 1  0 1 |  E0800  |  E2000
-   1 1 1  1 0 |  E1000  |  E2000
-   1 1 1  1 1 |  E1800  |  E2000
-  
-*) To enable the 8K Boot PROM install the jumper ROM.
-   The default is jumper ROM not installed.
-
-
-Setting the Timeouts and Interrupt
-----------------------------------
-
-The jumpers labeled EXT1 and EXT2 are used to determine the timeout 
-parameters. These two jumpers are normally left open.
-
-To select a hardware interrupt level set one (only one!) of the jumpers
-IRQ2, IRQ3, IRQ4, IRQ5, IRQ7. The Manufacturer's default is IRQ2.
- 
-
-Configuring the PC130E for Star or Bus Topology
------------------------------------------------
-
-The single jumper labeled STAR is used to configure the PC130E board for 
-star or bus topology.
-When the jumper is installed, the board may be used in a star network, when 
-it is removed, the board can be used in a bus topology.
-
-
-Diagnostic LEDs
----------------
-
-Two diagnostic LEDs are visible on the rear bracket of the board.
-The green LED monitors the network activity: the red one shows the
-board activity:
-
- Green  | Status               Red      | Status
- -------|-------------------   ---------|-------------------
-  on    | normal activity      flash/on | data transfer
-  blink | reconfiguration      off      | no data transfer;
-  off   | defective board or            | incorrect memory or
-        | node ID is zero               | I/O address
-
-
-*****************************************************************************
-
-** Standard Microsystems Corp (SMC) **
-PC500/PC550 Longboard (16-bit cards)
--------------------------------------
-  - from Juergen Seifert <seifert@htwm.de>
-
-
-STANDARD MICROSYSTEMS CORPORATION (SMC) ARCNET-PC500/PC550 Long Board
-=====================================================================
-
-Note: There is another Version of the PC500 called Short Version, which 
-      is different in hard- and software! The most important differences
-      are:
-      - The long board has no Shared memory.
-      - On the long board the selection of the interrupt is done by binary
-        coded switch, on the short board directly by jumper.
-        
-[Avery's note: pay special attention to that: the long board HAS NO SHARED
-MEMORY.  This means the current Linux-ARCnet driver can't use these cards. 
-I have obtained a PC500Longboard and will be doing some experiments on it in
-the future, but don't hold your breath.  Thanks again to Juergen Seifert for
-his advice about this!]
-
-This description has been written by Juergen Seifert <seifert@htwm.de>
-using information from the following Original SMC Manual 
-
-             "Configuration Guide for
-             SMC ARCNET-PC500/PC550
-         Series Network Controller Boards
-             Pub. # 900.033 Rev. A
-                November, 1989"
-
-ARCNET is a registered trademark of the Datapoint Corporation
-SMC is a registered trademark of the Standard Microsystems Corporation  
-
-The PC500 is equipped with a standard BNC female connector for connection
-to RG-62/U coax cable.
-The board is designed both for point-to-point connection in star networks
-and for connection to bus networks.
-
-The PC550 is equipped with two modular RJ11-type jacks for connection
-to twisted pair wiring.
-It can be used in a star or a daisy-chained (BUS) network.
-
-       1 
-       0 9 8 7 6 5 4 3 2 1     6 5 4 3 2 1
-    ____________________________________________________________________
-   < |         SW1         | |     SW2     |                            |
-   > |_____________________| |_____________|                            |
-   <   IRQ    |I/O Addr                                                 |
-   >                                                                 ___|
-   <                                                            CR4 |___|
-   >                                                            CR3 |___|
-   <                                                                 ___|
-   >                                                              N |   | 8
-   <                                                              o |   | 7
-   >                                                              d | S | 6
-   <                                                              e | W | 5
-   >                                                              A | 3 | 4
-   <                                                              d |   | 3
-   >                                                              d |   | 2
-   <                                                              r |___| 1
-   >                                                        |o|    _____|
-   <                                                        |o|   | J1  |
-   >  3 1                                                   JP6   |_____|
-   < |o|o| JP2                                                    | J2  |
-   > |o|o|                                                        |_____|
-   <  4 2__                                               ______________|
-   >    |  |                                             |
-   <____|  |_____________________________________________|
-
-Legend:
-
-SW1	1-6:	I/O Base Address Select
-	7-10:	Interrupt Select
-SW2	1-6:	Reserved for Future Use
-SW3	1-8:	Node ID Select
-JP2	1-4:	Extended Timeout Select
-JP6		Selected - Star Topology	(PC500 only)
-		Deselected - Bus Topology	(PC500 only)
-CR3	Green	Monitors Network Activity
-CR4	Red	Monitors Board Activity
-J1		BNC RG62/U Connector		(PC500 only)
-J1		6-position Telephone Jack	(PC550 only)
-J2		6-position Telephone Jack	(PC550 only)
-
-Setting one of the switches to Off/Open means "1", On/Closed means "0".
-
-
-Setting the Node ID
--------------------
-
-The eight switches in group SW3 are used to set the node ID. Each node
-attached to the network must have an unique node ID which must be 
-different from 0.
-Switch 1 serves as the least significant bit (LSB).
-
-The node ID is the sum of the values of all switches set to "1"  
-These values are:
-
-    Switch | Value
-    -------|-------
-      1    |   1
-      2    |   2
-      3    |   4
-      4    |   8
-      5    |  16
-      6    |  32
-      7    |  64
-      8    | 128
-
-Some Examples:
-
-    Switch         | Hex     | Decimal 
-   8 7 6 5 4 3 2 1 | Node ID | Node ID
-   ----------------|---------|---------
-   0 0 0 0 0 0 0 0 |    not allowed
-   0 0 0 0 0 0 0 1 |    1    |    1 
-   0 0 0 0 0 0 1 0 |    2    |    2
-   0 0 0 0 0 0 1 1 |    3    |    3
-       . . .       |         |
-   0 1 0 1 0 1 0 1 |   55    |   85
-       . . .       |         |
-   1 0 1 0 1 0 1 0 |   AA    |  170
-       . . .       |         |  
-   1 1 1 1 1 1 0 1 |   FD    |  253
-   1 1 1 1 1 1 1 0 |   FE    |  254
-   1 1 1 1 1 1 1 1 |   FF    |  255 
-
-
-Setting the I/O Base Address
-----------------------------
-
-The first six switches in switch group SW1 are used to select one
-of 32 possible I/O Base addresses using the following table
-
-   Switch       | Hex I/O
-   6 5  4 3 2 1 | Address
-   -------------|--------
-   0 1  0 0 0 0 |  200
-   0 1  0 0 0 1 |  210
-   0 1  0 0 1 0 |  220
-   0 1  0 0 1 1 |  230
-   0 1  0 1 0 0 |  240
-   0 1  0 1 0 1 |  250
-   0 1  0 1 1 0 |  260
-   0 1  0 1 1 1 |  270
-   0 1  1 0 0 0 |  280
-   0 1  1 0 0 1 |  290
-   0 1  1 0 1 0 |  2A0
-   0 1  1 0 1 1 |  2B0
-   0 1  1 1 0 0 |  2C0
-   0 1  1 1 0 1 |  2D0
-   0 1  1 1 1 0 |  2E0 (Manufacturer's default)
-   0 1  1 1 1 1 |  2F0
-   1 1  0 0 0 0 |  300
-   1 1  0 0 0 1 |  310
-   1 1  0 0 1 0 |  320
-   1 1  0 0 1 1 |  330
-   1 1  0 1 0 0 |  340
-   1 1  0 1 0 1 |  350
-   1 1  0 1 1 0 |  360
-   1 1  0 1 1 1 |  370
-   1 1  1 0 0 0 |  380
-   1 1  1 0 0 1 |  390
-   1 1  1 0 1 0 |  3A0
-   1 1  1 0 1 1 |  3B0
-   1 1  1 1 0 0 |  3C0
-   1 1  1 1 0 1 |  3D0
-   1 1  1 1 1 0 |  3E0
-   1 1  1 1 1 1 |  3F0
-
-
-Setting the Interrupt
----------------------
-
-Switches seven through ten of switch group SW1 are used to select the 
-interrupt level. The interrupt level is binary coded, so selections 
-from 0 to 15 would be possible, but only the following eight values will
-be supported: 3, 4, 5, 7, 9, 10, 11, 12.
-
-   Switch   | IRQ
-   10 9 8 7 | 
-   ---------|-------- 
-    0 0 1 1 |  3
-    0 1 0 0 |  4
-    0 1 0 1 |  5
-    0 1 1 1 |  7
-    1 0 0 1 |  9 (=2) (default)
-    1 0 1 0 | 10
-    1 0 1 1 | 11
-    1 1 0 0 | 12
-
-
-Setting the Timeouts 
---------------------
-
-The two jumpers JP2 (1-4) are used to determine the timeout parameters. 
-These two jumpers are normally left open.
-Refer to the COM9026 Data Sheet for alternate configurations.
-
-
-Configuring the PC500 for Star or Bus Topology
-----------------------------------------------
-
-The single jumper labeled JP6 is used to configure the PC500 board for 
-star or bus topology.
-When the jumper is installed, the board may be used in a star network, when 
-it is removed, the board can be used in a bus topology.
-
-
-Diagnostic LEDs
----------------
-
-Two diagnostic LEDs are visible on the rear bracket of the board.
-The green LED monitors the network activity: the red one shows the
-board activity:
-
- Green  | Status               Red      | Status
- -------|-------------------   ---------|-------------------
-  on    | normal activity      flash/on | data transfer
-  blink | reconfiguration      off      | no data transfer;
-  off   | defective board or            | incorrect memory or
-        | node ID is zero               | I/O address
-
-
-*****************************************************************************
-
-** SMC **
-PC710 (8-bit card)
-------------------
-  - from J.S. van Oosten <jvoosten@compiler.tdcnet.nl>
-  
-Note: this data is gathered by experimenting and looking at info of other
-cards. However, I'm sure I got 99% of the settings right.
-
-The SMC710 card resembles the PC270 card, but is much more basic (i.e. no
-LEDs, RJ11 jacks, etc.) and 8 bit. Here's a little drawing:
-
-    _______________________________________   
-   | +---------+  +---------+              |____
-   | |   S2    |  |   S1    |              |
-   | +---------+  +---------+              |
-   |                                       |
-   |  +===+    __                          |
-   |  | R |   |  | X-tal                 ###___
-   |  | O |   |__|                      ####__'|
-   |  | M |    ||                        ###
-   |  +===+                                |
-   |                                       |
-   |   .. JP1   +----------+               |
-   |   ..       | big chip |               |   
-   |   ..       |  90C63   |               |
-   |   ..       |          |               |
-   |   ..       +----------+               |
-    -------                     -----------
-           |||||||||||||||||||||
-
-The row of jumpers at JP1 actually consists of 8 jumpers, (sometimes
-labelled) the same as on the PC270, from top to bottom: EXT2, EXT1, ROM,
-IRQ7, IRQ5, IRQ4, IRQ3, IRQ2 (gee, wonder what they would do? :-) )
-
-S1 and S2 perform the same function as on the PC270, only their numbers
-are swapped (S1 is the nodeaddress, S2 sets IO- and RAM-address).
-
-I know it works when connected to a PC110 type ARCnet board.
-
-	
-*****************************************************************************
-
-** Possibly SMC **
-LCS-8830(-T) (8 and 16-bit cards)
----------------------------------
-  - from Mathias Katzer <mkatzer@HRZ.Uni-Bielefeld.DE>
-  - Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl> says the
-    LCS-8830 is slightly different from LCS-8830-T.  These are 8 bit, BUS
-    only (the JP0 jumper is hardwired), and BNC only.
-	
-This is a LCS-8830-T made by SMC, I think ('SMC' only appears on one PLCC,
-nowhere else, not even on the few Xeroxed sheets from the manual).
-
-SMC ARCnet Board Type LCS-8830-T
-
-   ------------------------------------
-  |                                    |
-  |              JP3 88  8 JP2         |
-  |       #####      | \               |
-  |       #####    ET1 ET2          ###|
-  |                              8  ###|
-  |  U3   SW 1                  JP0 ###|  Phone Jacks
-  |  --                             ###|
-  | |  |                               |
-  | |  |   SW2                         |
-  | |  |                               |
-  | |  |  #####                        |
-  |  --   #####                       ####  BNC Connector 
-  |                                   ####
-  |   888888 JP1                       |
-  |   234567                           |
-   --                           -------
-     |||||||||||||||||||||||||||
-      --------------------------
-
-
-SW1: DIP-Switches for Station Address
-SW2: DIP-Switches for Memory Base and I/O Base addresses
-
-JP0: If closed, internal termination on (default open)
-JP1: IRQ Jumpers
-JP2: Boot-ROM enabled if closed
-JP3: Jumpers for response timeout
- 
-U3: Boot-ROM Socket          
-
-
-ET1 ET2     Response Time     Idle Time    Reconfiguration Time
-
-               78                86               840
- X            285               316              1680
-     X        563               624              1680
- X   X       1130              1237              1680
-
-(X means closed jumper)
-
-(DIP-Switch downwards means "0")
-
-The station address is binary-coded with SW1.
-
-The I/O base address is coded with DIP-Switches 6,7 and 8 of SW2:
-
-Switches        Base
-678             Address
-000		260-26f
-100		290-29f
-010		2e0-2ef
-110		2f0-2ff
-001		300-30f
-101		350-35f
-011		380-38f
-111 		3e0-3ef
-
-
-DIP Switches 1-5 of SW2 encode the RAM and ROM Address Range:
-
-Switches        RAM           ROM
-12345           Address Range  Address Range
-00000		C:0000-C:07ff	C:2000-C:3fff
-10000		C:0800-C:0fff
-01000		C:1000-C:17ff
-11000		C:1800-C:1fff
-00100		C:4000-C:47ff	C:6000-C:7fff
-10100		C:4800-C:4fff
-01100		C:5000-C:57ff 
-11100		C:5800-C:5fff
-00010		C:C000-C:C7ff	C:E000-C:ffff
-10010		C:C800-C:Cfff
-01010		C:D000-C:D7ff
-11010		C:D800-C:Dfff
-00110		D:0000-D:07ff	D:2000-D:3fff
-10110		D:0800-D:0fff
-01110		D:1000-D:17ff
-11110		D:1800-D:1fff
-00001		D:4000-D:47ff	D:6000-D:7fff
-10001		D:4800-D:4fff
-01001		D:5000-D:57ff
-11001		D:5800-D:5fff
-00101		D:8000-D:87ff	D:A000-D:bfff
-10101		D:8800-D:8fff
-01101		D:9000-D:97ff
-11101		D:9800-D:9fff 
-00011		D:C000-D:c7ff	D:E000-D:ffff
-10011		D:C800-D:cfff
-01011		D:D000-D:d7ff
-11011		D:D800-D:dfff
-00111		E:0000-E:07ff	E:2000-E:3fff
-10111		E:0800-E:0fff
-01111		E:1000-E:17ff
-11111		E:1800-E:1fff
-
-
-*****************************************************************************
-
-** PureData Corp **
-PDI507 (8-bit card)
---------------------
-  - from Mark Rejhon <mdrejhon@magi.com> (slight modifications by Avery)
-  - Avery's note: I think PDI508 cards (but definitely NOT PDI508Plus cards)
-    are mostly the same as this.  PDI508Plus cards appear to be mainly
-    software-configured.
-
-Jumpers:
-	There is a jumper array at the bottom of the card, near the edge
-        connector.  This array is labelled J1.  They control the IRQs and
-        something else.  Put only one jumper on the IRQ pins.
-
-	ETS1, ETS2 are for timing on very long distance networks.  See the
-	more general information near the top of this file.
-
-	There is a J2 jumper on two pins.  A jumper should be put on them,
-        since it was already there when I got the card.  I don't know what
-        this jumper is for though.
-
-	There is a two-jumper array for J3.  I don't know what it is for,
-        but there were already two jumpers on it when I got the card.  It's
-        a six pin grid in a two-by-three fashion.  The jumpers were
-        configured as follows:
-
-	   .-------.
-	 o | o   o |
-	   :-------:    ------> Accessible end of card with connectors
-	 o | o   o |             in this direction ------->
-	   `-------'
-
-Carl de Billy <CARL@carainfo.com> explains J3 and J4:
-
-	J3 Diagram:
-
-           .-------.
-         o | o   o |
-           :-------:    TWIST Technology
-         o | o   o |
-           `-------'
-           .-------.
-           | o   o | o
-           :-------:    COAX Technology
-           | o   o | o
-           `-------'
-
-  - If using coax cable in a bus topology the J4 jumper must be removed;
-    place it on one pin.
-
-  - If using bus topology with twisted pair wiring move the J3 
-    jumpers so they connect the middle pin and the pins closest to the RJ11
-    Connectors.  Also the J4 jumper must be removed; place it on one pin of
-    J4 jumper for storage.
-
-  - If using  star topology with twisted pair wiring move the J3 
-    jumpers so they connect the middle pin and the pins closest to the RJ11
-    connectors.
-
-
-DIP Switches:
-
-	The DIP switches accessible on the accessible end of the card while
-        it is installed, is used to set the ARCnet address.  There are 8
-        switches.  Use an address from 1 to 254.
-
-	Switch No.
-	12345678	ARCnet address
-	-----------------------------------------
-	00000000	FF  	(Don't use this!)
-	00000001	FE
-	00000010	FD
-	....
-	11111101	2	
-	11111110	1
-	11111111	0	(Don't use this!)
-
-	There is another array of eight DIP switches at the top of the
-        card.  There are five labelled MS0-MS4 which seem to control the
-        memory address, and another three labelled IO0-IO2 which seem to
-        control the base I/O address of the card.
-
-	This was difficult to test by trial and error, and the I/O addresses
-        are in a weird order.  This was tested by setting the DIP switches,
-        rebooting the computer, and attempting to load ARCETHER at various
-        addresses (mostly between 0x200 and 0x400).  The address that caused
-        the red transmit LED to blink, is the one that I thought works.
-
-	Also, the address 0x3D0 seem to have a special meaning, since the
-        ARCETHER packet driver loaded fine, but without the red LED
-        blinking.  I don't know what 0x3D0 is for though.  I recommend using
-        an address of 0x300 since Windows may not like addresses below
-        0x300.
-
-	IO Switch No.
-	210             I/O address
-	-------------------------------
-	111             0x260
-	110             0x290
-	101             0x2E0
-	100             0x2F0
-	011             0x300
-	010             0x350
-	001             0x380
-	000             0x3E0
-
-	The memory switches set a reserved address space of 0x1000 bytes
-        (0x100 segment units, or 4k).  For example if I set an address of
-        0xD000, it will use up addresses 0xD000 to 0xD100.
-
-	The memory switches were tested by booting using QEMM386 stealth,
-        and using LOADHI to see what address automatically became excluded
-        from the upper memory regions, and then attempting to load ARCETHER
-        using these addresses.
-
-	I recommend using an ARCnet memory address of 0xD000, and putting
-        the EMS page frame at 0xC000 while using QEMM stealth mode.  That
-        way, you get contiguous high memory from 0xD100 almost all the way
-        the end of the megabyte.
-
-	Memory Switch 0 (MS0) didn't seem to work properly when set to OFF
-        on my card.  It could be malfunctioning on my card.  Experiment with
-        it ON first, and if it doesn't work, set it to OFF.  (It may be a
-        modifier for the 0x200 bit?)
-
-	MS Switch No.
-	43210           Memory address
-	--------------------------------
-	00001           0xE100  (guessed - was not detected by QEMM)
-	00011           0xE000  (guessed - was not detected by QEMM)
-	00101           0xDD00
-	00111           0xDC00
-	01001           0xD900
-	01011           0xD800
-	01101           0xD500
-	01111           0xD400
-	10001           0xD100
-	10011           0xD000
-	10101           0xCD00
-	10111           0xCC00
-	11001           0xC900 (guessed - crashes tested system)
-	11011           0xC800 (guessed - crashes tested system)
-	11101           0xC500 (guessed - crashes tested system)
-	11111           0xC400 (guessed - crashes tested system)
-	
-	
-*****************************************************************************
-
-** CNet Technology Inc. **
-120 Series (8-bit cards)
-------------------------
-  - from Juergen Seifert <seifert@htwm.de>
-
-
-CNET TECHNOLOGY INC. (CNet) ARCNET 120A SERIES
-==============================================
-
-This description has been written by Juergen Seifert <seifert@htwm.de>
-using information from the following Original CNet Manual 
-
-              "ARCNET
-            USER'S MANUAL 
-                for
-               CN120A
-               CN120AB
-               CN120TP
-               CN120ST
-               CN120SBT
-             P/N:12-01-0007
-             Revision 3.00"
-
-ARCNET is a registered trademark of the Datapoint Corporation
-
-P/N 120A   ARCNET 8 bit XT/AT Star
-P/N 120AB  ARCNET 8 bit XT/AT Bus
-P/N 120TP  ARCNET 8 bit XT/AT Twisted Pair
-P/N 120ST  ARCNET 8 bit XT/AT Star, Twisted Pair
-P/N 120SBT ARCNET 8 bit XT/AT Star, Bus, Twisted Pair
-
-    __________________________________________________________________
-   |                                                                  |
-   |                                                               ___|
-   |                                                          LED |___|
-   |                                                               ___|
-   |                                                            N |   | ID7
-   |                                                            o |   | ID6
-   |                                                            d | S | ID5
-   |                                                            e | W | ID4
-   |                     ___________________                    A | 2 | ID3
-   |                    |                   |                   d |   | ID2
-   |                    |                   |  1 2 3 4 5 6 7 8  d |   | ID1
-   |                    |                   | _________________ r |___| ID0
-   |                    |      90C65        ||       SW1       |  ____|
-   |  JP 8 7            |                   ||_________________| |    |
-   |    |o|o|  JP1      |                   |                    | J2 |
-   |    |o|o|  |oo|     |                   |         JP 1 1 1   |    |
-   |   ______________   |                   |            0 1 2   |____|
-   |  |  PROM        |  |___________________|           |o|o|o|  _____|
-   |  >  SOCKET      |  JP 6 5 4 3 2                    |o|o|o| | J1  |
-   |  |______________|    |o|o|o|o|o|                   |o|o|o| |_____|
-   |_____                 |o|o|o|o|o|                   ______________|
-         |                                             |
-         |_____________________________________________|
-
-Legend:
-
-90C65       ARCNET Probe
-S1  1-5:    Base Memory Address Select
-    6-8:    Base I/O Address Select
-S2  1-8:    Node ID Select (ID0-ID7)
-JP1     ROM Enable Select
-JP2     IRQ2
-JP3     IRQ3
-JP4     IRQ4
-JP5     IRQ5
-JP6     IRQ7
-JP7/JP8     ET1, ET2 Timeout Parameters
-JP10/JP11   Coax / Twisted Pair Select  (CN120ST/SBT only)
-JP12        Terminator Select       (CN120AB/ST/SBT only)
-J1      BNC RG62/U Connector        (all except CN120TP)
-J2      Two 6-position Telephone Jack   (CN120TP/ST/SBT only)
-
-Setting one of the switches to Off means "1", On means "0".
-
-
-Setting the Node ID
--------------------
-
-The eight switches in SW2 are used to set the node ID. Each node attached
-to the network must have an unique node ID which must be different from 0.
-Switch 1 (ID0) serves as the least significant bit (LSB).
-
-The node ID is the sum of the values of all switches set to "1"  
-These values are:
-
-   Switch | Label | Value
-   -------|-------|-------
-     1    | ID0   |   1
-     2    | ID1   |   2
-     3    | ID2   |   4
-     4    | ID3   |   8
-     5    | ID4   |  16
-     6    | ID5   |  32
-     7    | ID6   |  64
-     8    | ID7   | 128
-
-Some Examples:
-
-    Switch         | Hex     | Decimal 
-   8 7 6 5 4 3 2 1 | Node ID | Node ID
-   ----------------|---------|---------
-   0 0 0 0 0 0 0 0 |    not allowed
-   0 0 0 0 0 0 0 1 |    1    |    1 
-   0 0 0 0 0 0 1 0 |    2    |    2
-   0 0 0 0 0 0 1 1 |    3    |    3
-       . . .       |         |
-   0 1 0 1 0 1 0 1 |   55    |   85
-       . . .       |         |
-   1 0 1 0 1 0 1 0 |   AA    |  170
-       . . .       |         |  
-   1 1 1 1 1 1 0 1 |   FD    |  253
-   1 1 1 1 1 1 1 0 |   FE    |  254
-   1 1 1 1 1 1 1 1 |   FF    |  255
-
-
-Setting the I/O Base Address
-----------------------------
-
-The last three switches in switch block SW1 are used to select one
-of eight possible I/O Base addresses using the following table
-
-
-   Switch      | Hex I/O
-    6   7   8  | Address
-   ------------|--------
-   ON  ON  ON  |  260
-   OFF ON  ON  |  290
-   ON  OFF ON  |  2E0  (Manufacturer's default)
-   OFF OFF ON  |  2F0
-   ON  ON  OFF |  300
-   OFF ON  OFF |  350
-   ON  OFF OFF |  380
-   OFF OFF OFF |  3E0
-
-
-Setting the Base Memory (RAM) buffer Address
---------------------------------------------
-
-The memory buffer (RAM) requires 2K. The base of this buffer can be 
-located in any of eight positions. The address of the Boot Prom is
-memory base + 8K or memory base + 0x2000.
-Switches 1-5 of switch block SW1 select the Memory Base address.
-
-   Switch              | Hex RAM | Hex ROM
-    1   2   3   4   5  | Address | Address *)
-   --------------------|---------|-----------
-   ON  ON  ON  ON  ON  |  C0000  |  C2000
-   ON  ON  OFF ON  ON  |  C4000  |  C6000
-   ON  ON  ON  OFF ON  |  CC000  |  CE000
-   ON  ON  OFF OFF ON  |  D0000  |  D2000  (Manufacturer's default)
-   ON  ON  ON  ON  OFF |  D4000  |  D6000
-   ON  ON  OFF ON  OFF |  D8000  |  DA000
-   ON  ON  ON  OFF OFF |  DC000  |  DE000
-   ON  ON  OFF OFF OFF |  E0000  |  E2000
-  
-*) To enable the Boot ROM install the jumper JP1
-
-Note: Since the switches 1 and 2 are always set to ON it may be possible
-      that they can be used to add an offset of 2K, 4K or 6K to the base
-      address, but this feature is not documented in the manual and I
-      haven't tested it yet.
-
-
-Setting the Interrupt Line
---------------------------
-
-To select a hardware interrupt level install one (only one!) of the jumpers
-JP2, JP3, JP4, JP5, JP6. JP2 is the default.
-
-   Jumper | IRQ     
-   -------|-----
-     2    |  2
-     3    |  3
-     4    |  4
-     5    |  5
-     6    |  7
-
-
-Setting the Internal Terminator on CN120AB/TP/SBT
---------------------------------------------------
-
-The jumper JP12 is used to enable the internal terminator. 
-
-                         -----
-       0                |  0  |     
-     -----   ON         |     |  ON
-    |  0  |             |  0  |
-    |     |  OFF         -----   OFF
-    |  0  |                0
-     -----
-   Terminator          Terminator 
-    disabled            enabled
-  
-
-Selecting the Connector Type on CN120ST/SBT
--------------------------------------------
-
-     JP10    JP11        JP10    JP11
-                         -----   -----
-       0       0        |  0  | |  0  |       
-     -----   -----      |     | |     |
-    |  0  | |  0  |     |  0  | |  0  |
-    |     | |     |      -----   -----
-    |  0  | |  0  |        0       0 
-     -----   -----
-     Coaxial Cable       Twisted Pair Cable 
-       (Default)
-
-
-Setting the Timeout Parameters
-------------------------------
-
-The jumpers labeled EXT1 and EXT2 are used to determine the timeout 
-parameters. These two jumpers are normally left open.
-
-
-
-*****************************************************************************
-
-** CNet Technology Inc. **
-160 Series (16-bit cards)
--------------------------
-  - from Juergen Seifert <seifert@htwm.de>
-
-CNET TECHNOLOGY INC. (CNet) ARCNET 160A SERIES
-==============================================
-
-This description has been written by Juergen Seifert <seifert@htwm.de>
-using information from the following Original CNet Manual 
-
-              "ARCNET
-            USER'S MANUAL 
-                for
-               CN160A
-               CN160AB
-               CN160TP
-             P/N:12-01-0006
-             Revision 3.00"
-
-ARCNET is a registered trademark of the Datapoint Corporation
-
-P/N 160A   ARCNET 16 bit XT/AT Star
-P/N 160AB  ARCNET 16 bit XT/AT Bus
-P/N 160TP  ARCNET 16 bit XT/AT Twisted Pair
-
-   ___________________________________________________________________
-  <                             _________________________          ___|
-  >               |oo| JP2     |                         |    LED |___|
-  <               |oo| JP1     |        9026             |    LED |___|
-  >                            |_________________________|         ___|
-  <                                                             N |   | ID7
-  >                                                      1      o |   | ID6
-  <                                    1 2 3 4 5 6 7 8 9 0      d | S | ID5
-  >         _______________           _____________________     e | W | ID4
-  <        |     PROM      |         |         SW1         |    A | 2 | ID3
-  >        >    SOCKET     |         |_____________________|    d |   | ID2
-  <        |_______________|          | IO-Base   | MEM   |     d |   | ID1
-  >                                                             r |___| ID0
-  <                                                               ____|
-  >                                                              |    |
-  <                                                              | J1 |
-  >                                                              |    |
-  <                                                              |____|
-  >                            1 1 1 1                                |
-  <  3 4 5 6 7      JP     8 9 0 1 2 3                                |
-  > |o|o|o|o|o|           |o|o|o|o|o|o|                               |
-  < |o|o|o|o|o| __        |o|o|o|o|o|o|                    ___________|
-  >            |  |                                       |
-  <____________|  |_______________________________________|
-
-Legend:
-
-9026            ARCNET Probe
-SW1 1-6:    Base I/O Address Select
-    7-10:   Base Memory Address Select
-SW2 1-8:    Node ID Select (ID0-ID7)
-JP1/JP2     ET1, ET2 Timeout Parameters
-JP3-JP13    Interrupt Select
-J1      BNC RG62/U Connector        (CN160A/AB only)
-J1      Two 6-position Telephone Jack   (CN160TP only)
-LED
-
-Setting one of the switches to Off means "1", On means "0".
-
-
-Setting the Node ID
--------------------
-
-The eight switches in SW2 are used to set the node ID. Each node attached
-to the network must have an unique node ID which must be different from 0.
-Switch 1 (ID0) serves as the least significant bit (LSB).
-
-The node ID is the sum of the values of all switches set to "1"  
-These values are:
-
-   Switch | Label | Value
-   -------|-------|-------
-     1    | ID0   |   1
-     2    | ID1   |   2
-     3    | ID2   |   4
-     4    | ID3   |   8
-     5    | ID4   |  16
-     6    | ID5   |  32
-     7    | ID6   |  64
-     8    | ID7   | 128
-
-Some Examples:
-
-    Switch         | Hex     | Decimal 
-   8 7 6 5 4 3 2 1 | Node ID | Node ID
-   ----------------|---------|---------
-   0 0 0 0 0 0 0 0 |    not allowed
-   0 0 0 0 0 0 0 1 |    1    |    1 
-   0 0 0 0 0 0 1 0 |    2    |    2
-   0 0 0 0 0 0 1 1 |    3    |    3
-       . . .       |         |
-   0 1 0 1 0 1 0 1 |   55    |   85
-       . . .       |         |
-   1 0 1 0 1 0 1 0 |   AA    |  170
-       . . .       |         |  
-   1 1 1 1 1 1 0 1 |   FD    |  253
-   1 1 1 1 1 1 1 0 |   FE    |  254
-   1 1 1 1 1 1 1 1 |   FF    |  255
-
-
-Setting the I/O Base Address
-----------------------------
-
-The first six switches in switch block SW1 are used to select the I/O Base
-address using the following table:
-
-             Switch        | Hex I/O
-    1   2   3   4   5   6  | Address
-   ------------------------|--------
-   OFF ON  ON  OFF OFF ON  |  260
-   OFF ON  OFF ON  ON  OFF |  290
-   OFF ON  OFF OFF OFF ON  |  2E0  (Manufacturer's default)
-   OFF ON  OFF OFF OFF OFF |  2F0
-   OFF OFF ON  ON  ON  ON  |  300
-   OFF OFF ON  OFF ON  OFF |  350
-   OFF OFF OFF ON  ON  ON  |  380
-   OFF OFF OFF OFF OFF ON  |  3E0
-
-Note: Other IO-Base addresses seem to be selectable, but only the above
-      combinations are documented.
-
-
-Setting the Base Memory (RAM) buffer Address
---------------------------------------------
-
-The switches 7-10 of switch block SW1 are used to select the Memory
-Base address of the RAM (2K) and the PROM.
-
-   Switch          | Hex RAM | Hex ROM
-    7   8   9  10  | Address | Address
-   ----------------|---------|-----------
-   OFF OFF ON  ON  |  C0000  |  C8000
-   OFF OFF ON  OFF |  D0000  |  D8000 (Default)
-   OFF OFF OFF ON  |  E0000  |  E8000
-
-Note: Other MEM-Base addresses seem to be selectable, but only the above
-      combinations are documented.
-
-
-Setting the Interrupt Line
---------------------------
-
-To select a hardware interrupt level install one (only one!) of the jumpers
-JP3 through JP13 using the following table:
-
-   Jumper | IRQ     
-   -------|-----------------
-     3    |  14
-     4    |  15
-     5    |  12
-     6    |  11
-     7    |  10
-     8    |   3
-     9    |   4
-    10    |   5
-    11    |   6
-    12    |   7
-    13    |   2 (=9) Default!
-
-Note:  - Do not use JP11=IRQ6, it may conflict with your Floppy Disk
-         Controller
-       - Use JP3=IRQ14 only, if you don't have an IDE-, MFM-, or RLL-
-         Hard Disk, it may conflict with their controllers
-
-
-Setting the Timeout Parameters
-------------------------------
-
-The jumpers labeled JP1 and JP2 are used to determine the timeout
-parameters. These two jumpers are normally left open.
-
-
-*****************************************************************************
-
-** Lantech **
-8-bit card, unknown model
--------------------------
-  - from Vlad Lungu <vlungu@ugal.ro> - his e-mail address seemed broken at
-    the time I tried to reach him.  Sorry Vlad, if you didn't get my reply.
-
-   ________________________________________________________________
-   |   1         8                                                 |
-   |   ___________                                               __|
-   |   |   SW1    |                                         LED |__|
-   |   |__________|                                                |
-   |                                                            ___|
-   |                _____________________                       |S | 8
-   |                |                   |                       |W |
-   |                |                   |                       |2 |
-   |                |                   |                       |__| 1
-   |                |      UM9065L      |     |o|  JP4         ____|____
-   |                |                   |     |o|              |  CN    |
-   |                |                   |                      |________|
-   |                |                   |                          |
-   |                |___________________|                          |
-   |                                                               |
-   |                                                               |
-   |      _____________                                            |
-   |      |            |                                           |
-   |      |    PROM    |        |ooooo|  JP6                       |
-   |      |____________|        |ooooo|                            |
-   |_____________                                             _   _|
-                |____________________________________________| |__|
-
-
-UM9065L : ARCnet Controller
-
-SW 1    : Shared Memory Address and I/O Base
-
-        ON=0
-
-        12345|Memory Address
-        -----|--------------
-        00001|  D4000
-        00010|  CC000
-        00110|  D0000
-        01110|  D1000
-        01101|  D9000
-        10010|  CC800
-        10011|  DC800
-        11110|  D1800
-
-It seems that the bits are considered in reverse order.  Also, you must
-observe that some of those addresses are unusual and I didn't probe them; I
-used a memory dump in DOS to identify them.  For the 00000 configuration and
-some others that I didn't write here the card seems to conflict with the
-video card (an S3 GENDAC). I leave the full decoding of those addresses to
-you.
-
-        678| I/O Address
-        ---|------------
-        000|    260
-        001|    failed probe
-        010|    2E0
-        011|    380
-        100|    290
-        101|    350
-        110|    failed probe
-        111|    3E0
-
-SW 2  : Node ID (binary coded)
-
-JP 4  : Boot PROM enable   CLOSE - enabled
-                           OPEN  - disabled
-
-JP 6  : IRQ set (ONLY ONE jumper on 1-5 for IRQ 2-6)
-
-
-*****************************************************************************
-
-** Acer **
-8-bit card, Model 5210-003
---------------------------
-  - from Vojtech Pavlik <vojtech@suse.cz> using portions of the existing
-    arcnet-hardware file.
-
-This is a 90C26 based card.  Its configuration seems similar to the SMC
-PC100, but has some additional jumpers I don't know the meaning of.
-
-               __
-              |  |
-   ___________|__|_________________________
-  |         |      |                       |
-  |         | BNC  |                       |
-  |         |______|                    ___|
-  |  _____________________             |___  
-  | |                     |                |
-  | | Hybrid IC           |                |
-  | |                     |       o|o J1   |
-  | |_____________________|       8|8      |
-  |                               8|8 J5   |
-  |                               o|o      |
-  |                               8|8      |
-  |__                             8|8      |
- (|__| LED                        o|o      |
-  |                               8|8      |
-  |                               8|8 J15  |
-  |                                        |
-  |                    _____               |
-  |                   |     |   _____      |
-  |                   |     |  |     |  ___|
-  |                   |     |  |     | |    
-  |  _____            | ROM |  | UFS | |    
-  | |     |           |     |  |     | |   
-  | |     |     ___   |     |  |     | |   
-  | |     |    |   |  |__.__|  |__.__| |   
-  | | NCR |    |XTL|   _____    _____  |   
-  | |     |    |___|  |     |  |     | |   
-  | |90C26|           |     |  |     | |   
-  | |     |           | RAM |  | UFS | |   
-  | |     | J17 o|o   |     |  |     | |   
-  | |     | J16 o|o   |     |  |     | |   
-  | |__.__|           |__.__|  |__.__| |   
-  |  ___                               |   
-  | |   |8                             |   
-  | |SW2|                              |   
-  | |   |                              |   
-  | |___|1                             |   
-  |  ___                               |   
-  | |   |10           J18 o|o          |   
-  | |   |                 o|o          |   
-  | |SW1|                 o|o          |   
-  | |   |             J21 o|o          |   
-  | |___|1                             |   
-  |                                    |   
-  |____________________________________|   
-
-
-Legend:
-
-90C26       ARCNET Chip
-XTL         20 MHz Crystal
-SW1 1-6     Base I/O Address Select
-    7-10    Memory Address Select
-SW2 1-8     Node ID Select (ID0-ID7)
-J1-J5       IRQ Select
-J6-J21      Unknown (Probably extra timeouts & ROM enable ...)
-LED1        Activity LED 
-BNC         Coax connector (STAR ARCnet)
-RAM         2k of SRAM
-ROM         Boot ROM socket
-UFS         Unidentified Flying Sockets
-
-
-Setting the Node ID
--------------------
-
-The eight switches in SW2 are used to set the node ID. Each node attached
-to the network must have an unique node ID which must not be 0.
-Switch 1 (ID0) serves as the least significant bit (LSB).
-
-Setting one of the switches to OFF means "1", ON means "0".
-
-The node ID is the sum of the values of all switches set to "1"
-These values are:
-
-   Switch | Value
-   -------|-------
-     1    |   1
-     2    |   2
-     3    |   4
-     4    |   8
-     5    |  16
-     6    |  32
-     7    |  64
-     8    | 128
-
-Don't set this to 0 or 255; these values are reserved.
-
-
-Setting the I/O Base Address
-----------------------------
-
-The switches 1 to 6 of switch block SW1 are used to select one
-of 32 possible I/O Base addresses using the following tables
-   
-          | Hex
-   Switch | Value
-   -------|-------
-     1    | 200  
-     2    | 100  
-     3    |  80  
-     4    |  40  
-     5    |  20  
-     6    |  10 
-
-The I/O address is sum of all switches set to "1". Remember that
-the I/O address space bellow 0x200 is RESERVED for mainboard, so
-switch 1 should be ALWAYS SET TO OFF. 
-
-
-Setting the Base Memory (RAM) buffer Address
---------------------------------------------
-
-The memory buffer (RAM) requires 2K. The base of this buffer can be
-located in any of sixteen positions. However, the addresses below
-A0000 are likely to cause system hang because there's main RAM.
-
-Jumpers 7-10 of switch block SW1 select the Memory Base address.
-
-   Switch          | Hex RAM
-    7   8   9  10  | Address
-   ----------------|---------
-   OFF OFF OFF OFF |  F0000 (conflicts with main BIOS)
-   OFF OFF OFF ON  |  E0000 
-   OFF OFF ON  OFF |  D0000
-   OFF OFF ON  ON  |  C0000 (conflicts with video BIOS)
-   OFF ON  OFF OFF |  B0000 (conflicts with mono video)
-   OFF ON  OFF ON  |  A0000 (conflicts with graphics)
-
-
-Setting the Interrupt Line
---------------------------
-
-Jumpers 1-5 of the jumper block J1 control the IRQ level. ON means 
-shorted, OFF means open.
-
-    Jumper              |  IRQ
-    1   2   3   4   5   |
-   ----------------------------
-    ON  OFF OFF OFF OFF |  7
-    OFF ON  OFF OFF OFF |  5
-    OFF OFF ON  OFF OFF |  4
-    OFF OFF OFF ON  OFF |  3
-    OFF OFF OFF OFF ON  |  2
-
-
-Unknown jumpers & sockets
--------------------------
-
-I know nothing about these. I just guess that J16&J17 are timeout
-jumpers and maybe one of J18-J21 selects ROM. Also J6-J10 and
-J11-J15 are connecting IRQ2-7 to some pins on the UFSs. I can't
-guess the purpose.
-
-
-*****************************************************************************
-
-** Datapoint? **
-LAN-ARC-8, an 8-bit card
-------------------------
-  - from Vojtech Pavlik <vojtech@suse.cz>
-
-This is another SMC 90C65-based ARCnet card. I couldn't identify the
-manufacturer, but it might be DataPoint, because the card has the
-original arcNet logo in its upper right corner.
-
-          _______________________________________________________
-         |                         _________                     |
-         |                        |   SW2   | ON      arcNet     |
-         |                        |_________| OFF             ___|
-         |  _____________         1 ______  8                |   | 8  
-         | |             | SW1     | XTAL | ____________     | S |    
-         | > RAM (2k)    |         |______||            |    | W |    
-         | |_____________|                 |      H     |    | 3 |    
-         |                        _________|_____ y     |    |___| 1  
-         |  _________            |         |     |b     |        |    
-         | |_________|           |         |     |r     |        |    
-         |                       |     SMC |     |i     |        |    
-         |                       |    90C65|     |d     |        |      
-         |  _________            |         |     |      |        |
-         | |   SW1   | ON        |         |     |I     |        |
-         | |_________| OFF       |_________|_____/C     |   _____|
-         |  1       8                      |            |  |     |___
-         |  ______________                 |            |  | BNC |___|
-         | |              |                |____________|  |_____|
-         | > EPROM SOCKET |              _____________           |
-         | |______________|             |_____________|          |
-         |                                         ______________|
-         |                                        | 
-         |________________________________________|
-
-Legend:
-
-90C65       ARCNET Chip 
-SW1 1-5:    Base Memory Address Select
-    6-8:    Base I/O Address Select
-SW2 1-8:    Node ID Select
-SW3 1-5:    IRQ Select   
-    6-7:    Extra Timeout
-    8  :    ROM Enable   
-BNC         Coax connector
-XTAL        20 MHz Crystal
-
-
-Setting the Node ID
--------------------
-
-The eight switches in SW3 are used to set the node ID. Each node attached
-to the network must have an unique node ID which must not be 0.
-Switch 1 serves as the least significant bit (LSB).
-
-Setting one of the switches to Off means "1", On means "0".
-
-The node ID is the sum of the values of all switches set to "1"  
-These values are:
-
-   Switch | Value
-   -------|-------
-     1    |   1
-     2    |   2
-     3    |   4
-     4    |   8
-     5    |  16
-     6    |  32
-     7    |  64
-     8    | 128
-
-
-Setting the I/O Base Address
-----------------------------
-
-The last three switches in switch block SW1 are used to select one
-of eight possible I/O Base addresses using the following table
-
-
-   Switch      | Hex I/O
-    6   7   8  | Address
-   ------------|--------
-   ON  ON  ON  |  260
-   OFF ON  ON  |  290
-   ON  OFF ON  |  2E0  (Manufacturer's default)
-   OFF OFF ON  |  2F0
-   ON  ON  OFF |  300
-   OFF ON  OFF |  350
-   ON  OFF OFF |  380
-   OFF OFF OFF |  3E0
-
-
-Setting the Base Memory (RAM) buffer Address
---------------------------------------------
-
-The memory buffer (RAM) requires 2K. The base of this buffer can be 
-located in any of eight positions. The address of the Boot Prom is
-memory base + 0x2000.
-Jumpers 3-5 of switch block SW1 select the Memory Base address.
-
-   Switch              | Hex RAM | Hex ROM
-    1   2   3   4   5  | Address | Address *)
-   --------------------|---------|-----------
-   ON  ON  ON  ON  ON  |  C0000  |  C2000
-   ON  ON  OFF ON  ON  |  C4000  |  C6000
-   ON  ON  ON  OFF ON  |  CC000  |  CE000
-   ON  ON  OFF OFF ON  |  D0000  |  D2000  (Manufacturer's default)
-   ON  ON  ON  ON  OFF |  D4000  |  D6000
-   ON  ON  OFF ON  OFF |  D8000  |  DA000
-   ON  ON  ON  OFF OFF |  DC000  |  DE000
-   ON  ON  OFF OFF OFF |  E0000  |  E2000
-  
-*) To enable the Boot ROM set the switch 8 of switch block SW3 to position ON.
-
-The switches 1 and 2 probably add 0x0800 and 0x1000 to RAM base address.
-
-
-Setting the Interrupt Line
---------------------------
-
-Switches 1-5 of the switch block SW3 control the IRQ level.
-
-    Jumper              |  IRQ
-    1   2   3   4   5   |
-   ----------------------------
-    ON  OFF OFF OFF OFF |  3
-    OFF ON  OFF OFF OFF |  4
-    OFF OFF ON  OFF OFF |  5
-    OFF OFF OFF ON  OFF |  7
-    OFF OFF OFF OFF ON  |  2
-
-
-Setting the Timeout Parameters
-------------------------------
-
-The switches 6-7 of the switch block SW3 are used to determine the timeout
-parameters.  These two switches are normally left in the OFF position.
-
-
-*****************************************************************************
-
-** Topware **
-8-bit card, TA-ARC/10
--------------------------
-  - from Vojtech Pavlik <vojtech@suse.cz>
-
-This is another very similar 90C65 card. Most of the switches and jumpers
-are the same as on other clones.
-
- _____________________________________________________________________
-|  ___________   |                         |            ______        |
-| |SW2 NODE ID|  |                         |           | XTAL |       |
-| |___________|  |  Hybrid IC              |           |______|       |
-|  ___________   |                         |                        __|    
-| |SW1 MEM+I/O|  |_________________________|                   LED1|__|)   
-| |___________|           1 2                                         |     
-|                     J3 |o|o| TIMEOUT                          ______|    
-|     ______________     |o|o|                                 |      |    
-|    |              |  ___________________                     | RJ   |    
-|    > EPROM SOCKET | |                   \                    |------|     
-|J2  |______________| |                    |                   |      |    
-||o|                  |                    |                   |______|
-||o| ROM ENABLE       |        SMC         |    _________             |
-|     _____________   |       90C65        |   |_________|       _____|    
-|    |             |  |                    |                    |     |___ 
-|    > RAM (2k)    |  |                    |                    | BNC |___|
-|    |_____________|  |                    |                    |_____|    
-|                     |____________________|                          |    
-| ________ IRQ 2 3 4 5 7                  ___________                 |
-||________|   |o|o|o|o|o|                |___________|                |
-|________   J1|o|o|o|o|o|                               ______________|
-         |                                             |
-         |_____________________________________________|
-
-Legend:
-
-90C65       ARCNET Chip
-XTAL        20 MHz Crystal
-SW1 1-5     Base Memory Address Select
-    6-8     Base I/O Address Select
-SW2 1-8     Node ID Select (ID0-ID7)
-J1          IRQ Select
-J2          ROM Enable
-J3          Extra Timeout
-LED1        Activity LED 
-BNC         Coax connector (BUS ARCnet)
-RJ          Twisted Pair Connector (daisy chain)
-
-
-Setting the Node ID
--------------------
-
-The eight switches in SW2 are used to set the node ID. Each node attached to
-the network must have an unique node ID which must not be 0.  Switch 1 (ID0)
-serves as the least significant bit (LSB).
-
-Setting one of the switches to Off means "1", On means "0".
-
-The node ID is the sum of the values of all switches set to "1"
-These values are:
-
-   Switch | Label | Value
-   -------|-------|-------
-     1    | ID0   |   1
-     2    | ID1   |   2
-     3    | ID2   |   4
-     4    | ID3   |   8
-     5    | ID4   |  16
-     6    | ID5   |  32
-     7    | ID6   |  64
-     8    | ID7   | 128
-
-Setting the I/O Base Address
-----------------------------
-
-The last three switches in switch block SW1 are used to select one
-of eight possible I/O Base addresses using the following table:
-
-
-   Switch      | Hex I/O
-    6   7   8  | Address
-   ------------|--------
-   ON  ON  ON  |  260  (Manufacturer's default)
-   OFF ON  ON  |  290
-   ON  OFF ON  |  2E0                         
-   OFF OFF ON  |  2F0
-   ON  ON  OFF |  300
-   OFF ON  OFF |  350
-   ON  OFF OFF |  380
-   OFF OFF OFF |  3E0
-
-
-Setting the Base Memory (RAM) buffer Address
---------------------------------------------
-
-The memory buffer (RAM) requires 2K. The base of this buffer can be
-located in any of eight positions. The address of the Boot Prom is
-memory base + 0x2000.
-Jumpers 3-5 of switch block SW1 select the Memory Base address.
-
-   Switch              | Hex RAM | Hex ROM
-    1   2   3   4   5  | Address | Address *)
-   --------------------|---------|-----------
-   ON  ON  ON  ON  ON  |  C0000  |  C2000
-   ON  ON  OFF ON  ON  |  C4000  |  C6000  (Manufacturer's default) 
-   ON  ON  ON  OFF ON  |  CC000  |  CE000
-   ON  ON  OFF OFF ON  |  D0000  |  D2000  
-   ON  ON  ON  ON  OFF |  D4000  |  D6000
-   ON  ON  OFF ON  OFF |  D8000  |  DA000
-   ON  ON  ON  OFF OFF |  DC000  |  DE000
-   ON  ON  OFF OFF OFF |  E0000  |  E2000
-
-*) To enable the Boot ROM short the jumper J2.
-
-The jumpers 1 and 2 probably add 0x0800 and 0x1000 to RAM address.
-
-
-Setting the Interrupt Line
---------------------------
-
-Jumpers 1-5 of the jumper block J1 control the IRQ level.  ON means
-shorted, OFF means open.
-
-    Jumper              |  IRQ
-    1   2   3   4   5   |
-   ----------------------------
-    ON  OFF OFF OFF OFF |  2
-    OFF ON  OFF OFF OFF |  3
-    OFF OFF ON  OFF OFF |  4
-    OFF OFF OFF ON  OFF |  5
-    OFF OFF OFF OFF ON  |  7
-
-
-Setting the Timeout Parameters
-------------------------------
-
-The jumpers J3 are used to set the timeout parameters. These two 
-jumpers are normally left open.
-
-  
-*****************************************************************************
-
-** Thomas-Conrad **
-Model #500-6242-0097 REV A (8-bit card)
----------------------------------------
-  - from Lars Karlsson <100617.3473@compuserve.com>
-
-     ________________________________________________________
-   |          ________   ________                           |_____
-   |         |........| |........|                            |
-   |         |________| |________|                         ___|
-   |            SW 3       SW 1                           |   |
-   |         Base I/O   Base Addr.                Station |   |
-   |                                              address |   |
-   |    ______                                    switch  |   |
-   |   |      |                                           |   |
-   |   |      |                                           |___|    
-   |   |      |                                 ______        |___._
-   |   |______|                                |______|         ____| BNC
-   |                                            Jumper-        _____| Connector
-   |   Main chip                                block  _    __|   '  
-   |                                                  | |  |    RJ Connector
-   |                                                  |_|  |    with 110 Ohm
-   |                                                       |__  Terminator
-   |    ___________                                         __|
-   |   |...........|                                       |    RJ-jack
-   |   |...........|    _____                              |    (unused)
-   |   |___________|   |_____|                             |__
-   |  Boot PROM socket IRQ-jumpers                            |_  Diagnostic
-   |________                                       __          _| LED (red)
-            | | | | | | | | | | | | | | | | | | | |  |        |
-            | | | | | | | | | | | | | | | | | | | |  |________|
-                                                              |
-                                                              |
-
-And here are the settings for some of the switches and jumpers on the cards.
-
-
-          I/O
-
-         1 2 3 4 5 6 7 8
-
-2E0----- 0 0 0 1 0 0 0 1
-2F0----- 0 0 0 1 0 0 0 0
-300----- 0 0 0 0 1 1 1 1
-350----- 0 0 0 0 1 1 1 0
-
-"0" in the above example means switch is off "1" means that it is on.
-
-
-    ShMem address.
-
-      1 2 3 4 5 6 7 8
-
-CX00--0 0 1 1 | |   |
-DX00--0 0 1 0       |
-X000--------- 1 1   |
-X400--------- 1 0   |
-X800--------- 0 1   |
-XC00--------- 0 0   
-ENHANCED----------- 1
-COMPATIBLE--------- 0
-
-
-       IRQ
-
-
-   3 4 5 7 2
-   . . . . .
-   . . . . .
-
-
-There is a DIP-switch with 8 switches, used to set the shared memory address
-to be used. The first 6 switches set the address, the 7th doesn't have any
-function, and the 8th switch is used to select "compatible" or "enhanced".
-When I got my two cards, one of them had this switch set to "enhanced". That
-card didn't work at all, it wasn't even recognized by the driver. The other
-card had this switch set to "compatible" and it behaved absolutely normally. I
-guess that the switch on one of the cards, must have been changed accidentally
-when the card was taken out of its former host. The question remains
-unanswered, what is the purpose of the "enhanced" position?
-
-[Avery's note: "enhanced" probably either disables shared memory (use IO
-ports instead) or disables IO ports (use memory addresses instead).  This
-varies by the type of card involved.  I fail to see how either of these
-enhance anything.  Send me more detailed information about this mode, or
-just use "compatible" mode instead.]
-
-
-*****************************************************************************
-
-** Waterloo Microsystems Inc. ?? **
-8-bit card (C) 1985
--------------------
-  - from Robert Michael Best <rmb117@cs.usask.ca>
-
-[Avery's note: these don't work with my driver for some reason.  These cards
-SEEM to have settings similar to the PDI508Plus, which is
-software-configured and doesn't work with my driver either.  The "Waterloo
-chip" is a boot PROM, probably designed specifically for the University of
-Waterloo.  If you have any further information about this card, please
-e-mail me.]
-
-The probe has not been able to detect the card on any of the J2 settings,
-and I tried them again with the "Waterloo" chip removed.
- 
- _____________________________________________________________________
-| \/  \/              ___  __ __                                      |
-| C4  C4     |^|     | M ||  ^  ||^|                                  |
-| --  --     |_|     | 5 ||     || | C3                               |
-| \/  \/      C10    |___||     ||_|                                  | 
-| C4  C4             _  _ |     |                 ??                  | 
-| --  --            | \/ ||     |                                     | 
-|                   |    ||     |                                     | 
-|                   |    ||  C1 |                                     | 
-|                   |    ||     |  \/                            _____|    
-|                   | C6 ||     |  C9                           |     |___ 
-|                   |    ||     |  --                           | BNC |___| 
-|                   |    ||     |          >C7|                 |_____|
-|                   |    ||     |                                     |
-| __ __             |____||_____|       1 2 3     6                   |
-||  ^  |     >C4|                      |o|o|o|o|o|o| J2    >C4|       |
-||     |                               |o|o|o|o|o|o|                  |
-|| C2  |     >C4|                                          >C4|       |
-||     |                                   >C8|                       |
-||     |       2 3 4 5 6 7  IRQ                            >C4|       |
-||_____|      |o|o|o|o|o|o| J3                                        |
-|_______      |o|o|o|o|o|o|                            _______________|
-        |                                             |
-        |_____________________________________________|
-
-C1 -- "COM9026
-       SMC 8638"
-      In a chip socket.
-
-C2 -- "@Copyright
-       Waterloo Microsystems Inc.
-       1985"
-      In a chip Socket with info printed on a label covering a round window
-      showing the circuit inside. (The window indicates it is an EPROM chip.)
-
-C3 -- "COM9032
-       SMC 8643"
-      In a chip socket.
-
-C4 -- "74LS"
-      9 total no sockets.
-
-M5 -- "50006-136
-       20.000000 MHZ
-       MTQ-T1-S3
-       0 M-TRON 86-40"
-      Metallic case with 4 pins, no socket.
-
-C6 -- "MOSTEK@TC8643
-       MK6116N-20
-       MALAYSIA"
-      No socket.
-
-C7 -- No stamp or label but in a 20 pin chip socket.
-
-C8 -- "PAL10L8CN
-       8623"
-      In a 20 pin socket.
-
-C9 -- "PAl16R4A-2CN
-       8641"
-      In a 20 pin socket.
-
-C10 -- "M8640
-          NMC
-        9306N"
-       In an 8 pin socket.
-
-?? -- Some components on a smaller board and attached with 20 pins all 
-      along the side closest to the BNC connector.  The are coated in a dark 
-      resin.
-
-On the board there are two jumper banks labeled J2 and J3. The 
-manufacturer didn't put a J1 on the board. The two boards I have both 
-came with a jumper box for each bank.
-
-J2 -- Numbered 1 2 3 4 5 6. 
-      4 and 5 are not stamped due to solder points.
-       
-J3 -- IRQ 2 3 4 5 6 7
-
-The board itself has a maple leaf stamped just above the irq jumpers 
-and "-2 46-86" beside C2. Between C1 and C6 "ASS 'Y 300163" and "@1986 
-CORMAN CUSTOM ELECTRONICS CORP." stamped just below the BNC connector.
-Below that "MADE IN CANADA"
-
-  
-*****************************************************************************
-
-** No Name **
-8-bit cards, 16-bit cards
--------------------------
-  - from Juergen Seifert <seifert@htwm.de>
-  
-NONAME 8-BIT ARCNET
-===================
-
-I have named this ARCnet card "NONAME", since there is no name of any
-manufacturer on the Installation manual nor on the shipping box. The only
-hint to the existence of a manufacturer at all is written in copper,
-it is "Made in Taiwan"
-
-This description has been written by Juergen Seifert <seifert@htwm.de>
-using information from the Original
-                    "ARCnet Installation Manual"
-
-
-    ________________________________________________________________
-   | |STAR| BUS| T/P|                                               |
-   | |____|____|____|                                               |
-   |                            _____________________               |
-   |                           |                     |              |
-   |                           |                     |              |
-   |                           |                     |              |
-   |                           |        SMC          |              |
-   |                           |                     |              |
-   |                           |       COM90C65      |              |
-   |                           |                     |              |
-   |                           |                     |              |
-   |                           |__________-__________|              |
-   |                                                           _____|
-   |      _______________                                     |  CN |
-   |     | PROM          |                                    |_____|
-   |     > SOCKET        |                                          |
-   |     |_______________|         1 2 3 4 5 6 7 8  1 2 3 4 5 6 7 8 |
-   |                               _______________  _______________ |
-   |           |o|o|o|o|o|o|o|o|  |      SW1      ||      SW2      ||
-   |           |o|o|o|o|o|o|o|o|  |_______________||_______________||
-   |___         2 3 4 5 7 E E R        Node ID       IOB__|__MEM____|
-       |        \ IRQ   / T T O                      |
-       |__________________1_2_M______________________|
-
-Legend:
-
-COM90C65:       ARCnet Probe
-S1  1-8:    Node ID Select
-S2  1-3:    I/O Base Address Select
-    4-6:    Memory Base Address Select
-    7-8:    RAM Offset Select
-ET1, ET2    Extended Timeout Select
-ROM     ROM Enable Select
-CN              RG62 Coax Connector
-STAR| BUS | T/P Three fields for placing a sign (colored circle)
-                indicating the topology of the card
-
-Setting one of the switches to Off means "1", On means "0".
-
-
-Setting the Node ID
--------------------
-
-The eight switches in group SW1 are used to set the node ID.
-Each node attached to the network must have an unique node ID which
-must be different from 0.
-Switch 8 serves as the least significant bit (LSB).
-
-The node ID is the sum of the values of all switches set to "1"  
-These values are:
-
-    Switch | Value
-    -------|-------
-      8    |   1
-      7    |   2
-      6    |   4
-      5    |   8
-      4    |  16
-      3    |  32
-      2    |  64
-      1    | 128
-
-Some Examples:
-
-    Switch         | Hex     | Decimal 
-   1 2 3 4 5 6 7 8 | Node ID | Node ID
-   ----------------|---------|---------
-   0 0 0 0 0 0 0 0 |    not allowed
-   0 0 0 0 0 0 0 1 |    1    |    1 
-   0 0 0 0 0 0 1 0 |    2    |    2
-   0 0 0 0 0 0 1 1 |    3    |    3
-       . . .       |         |
-   0 1 0 1 0 1 0 1 |   55    |   85
-       . . .       |         |
-   1 0 1 0 1 0 1 0 |   AA    |  170
-       . . .       |         |  
-   1 1 1 1 1 1 0 1 |   FD    |  253
-   1 1 1 1 1 1 1 0 |   FE    |  254
-   1 1 1 1 1 1 1 1 |   FF    |  255
-
-
-Setting the I/O Base Address
-----------------------------
-
-The first three switches in switch group SW2 are used to select one
-of eight possible I/O Base addresses using the following table
-
-   Switch      | Hex I/O
-    1   2   3  | Address
-   ------------|--------
-   ON  ON  ON  |  260
-   ON  ON  OFF |  290
-   ON  OFF ON  |  2E0  (Manufacturer's default)
-   ON  OFF OFF |  2F0
-   OFF ON  ON  |  300
-   OFF ON  OFF |  350
-   OFF OFF ON  |  380
-   OFF OFF OFF |  3E0
-
-
-Setting the Base Memory (RAM) buffer Address
---------------------------------------------
-
-The memory buffer requires 2K of a 16K block of RAM. The base of this
-16K block can be located in any of eight positions.
-Switches 4-6 of switch group SW2 select the Base of the 16K block.
-Within that 16K address space, the buffer may be assigned any one of four
-positions, determined by the offset, switches 7 and 8 of group SW2.
-
-   Switch     | Hex RAM | Hex ROM
-   4 5 6  7 8 | Address | Address *)
-   -----------|---------|-----------
-   0 0 0  0 0 |  C0000  |  C2000
-   0 0 0  0 1 |  C0800  |  C2000
-   0 0 0  1 0 |  C1000  |  C2000
-   0 0 0  1 1 |  C1800  |  C2000
-              |         |
-   0 0 1  0 0 |  C4000  |  C6000
-   0 0 1  0 1 |  C4800  |  C6000
-   0 0 1  1 0 |  C5000  |  C6000
-   0 0 1  1 1 |  C5800  |  C6000
-              |         |
-   0 1 0  0 0 |  CC000  |  CE000
-   0 1 0  0 1 |  CC800  |  CE000
-   0 1 0  1 0 |  CD000  |  CE000
-   0 1 0  1 1 |  CD800  |  CE000
-              |         |
-   0 1 1  0 0 |  D0000  |  D2000  (Manufacturer's default)
-   0 1 1  0 1 |  D0800  |  D2000
-   0 1 1  1 0 |  D1000  |  D2000
-   0 1 1  1 1 |  D1800  |  D2000
-              |         |
-   1 0 0  0 0 |  D4000  |  D6000
-   1 0 0  0 1 |  D4800  |  D6000
-   1 0 0  1 0 |  D5000  |  D6000
-   1 0 0  1 1 |  D5800  |  D6000
-              |         |
-   1 0 1  0 0 |  D8000  |  DA000
-   1 0 1  0 1 |  D8800  |  DA000
-   1 0 1  1 0 |  D9000  |  DA000
-   1 0 1  1 1 |  D9800  |  DA000
-              |         |
-   1 1 0  0 0 |  DC000  |  DE000
-   1 1 0  0 1 |  DC800  |  DE000
-   1 1 0  1 0 |  DD000  |  DE000
-   1 1 0  1 1 |  DD800  |  DE000
-              |         |
-   1 1 1  0 0 |  E0000  |  E2000
-   1 1 1  0 1 |  E0800  |  E2000
-   1 1 1  1 0 |  E1000  |  E2000
-   1 1 1  1 1 |  E1800  |  E2000
-  
-*) To enable the 8K Boot PROM install the jumper ROM.
-   The default is jumper ROM not installed.
-
-
-Setting Interrupt Request Lines (IRQ)
--------------------------------------
-
-To select a hardware interrupt level set one (only one!) of the jumpers
-IRQ2, IRQ3, IRQ4, IRQ5 or IRQ7. The manufacturer's default is IRQ2.
- 
-
-Setting the Timeouts
---------------------
-
-The two jumpers labeled ET1 and ET2 are used to determine the timeout
-parameters (response and reconfiguration time). Every node in a network
-must be set to the same timeout values.
-
-   ET1 ET2 | Response Time (us) | Reconfiguration Time (ms)
-   --------|--------------------|--------------------------
-   Off Off |        78          |          840   (Default)
-   Off On  |       285          |         1680
-   On  Off |       563          |         1680
-   On  On  |      1130          |         1680
-
-On means jumper installed, Off means jumper not installed
-
-
-NONAME 16-BIT ARCNET
-====================
-
-The manual of my 8-Bit NONAME ARCnet Card contains another description
-of a 16-Bit Coax / Twisted Pair Card. This description is incomplete,
-because there are missing two pages in the manual booklet. (The table
-of contents reports pages ... 2-9, 2-11, 2-12, 3-1, ... but inside
-the booklet there is a different way of counting ... 2-9, 2-10, A-1,
-(empty page), 3-1, ..., 3-18, A-1 (again), A-2)
-Also the picture of the board layout is not as good as the picture of
-8-Bit card, because there isn't any letter like "SW1" written to the
-picture.
-Should somebody have such a board, please feel free to complete this
-description or to send a mail to me!
-
-This description has been written by Juergen Seifert <seifert@htwm.de>
-using information from the Original
-                    "ARCnet Installation Manual"
-
-
-   ___________________________________________________________________
-  <                    _________________  _________________           |
-  >                   |       SW?       ||      SW?        |          |
-  <                   |_________________||_________________|          |
-  >                       ____________________                        |
-  <                      |                    |                       |
-  >                      |                    |                       |
-  <                      |                    |                       |
-  >                      |                    |                       |
-  <                      |                    |                       |
-  >                      |                    |                       |
-  <                      |                    |                       |
-  >                      |____________________|                       |
-  <                                                               ____|
-  >                       ____________________                   |    |
-  <                      |                    |                  | J1 |
-  >                      |                    <                  |    |
-  <                      |____________________|  ? ? ? ? ? ?     |____|
-  >                                             |o|o|o|o|o|o|         |
-  <                                             |o|o|o|o|o|o|         |
-  >                                                                   |
-  <             __                                         ___________|
-  >            |  |                                       |
-  <____________|  |_______________________________________|
-
-
-Setting one of the switches to Off means "1", On means "0".
-
-
-Setting the Node ID
--------------------
-
-The eight switches in group SW2 are used to set the node ID.
-Each node attached to the network must have an unique node ID which
-must be different from 0.
-Switch 8 serves as the least significant bit (LSB).
-
-The node ID is the sum of the values of all switches set to "1"  
-These values are:
-
-    Switch | Value
-    -------|-------
-      8    |   1
-      7    |   2
-      6    |   4
-      5    |   8
-      4    |  16
-      3    |  32
-      2    |  64
-      1    | 128
-
-Some Examples:
-
-    Switch         | Hex     | Decimal 
-   1 2 3 4 5 6 7 8 | Node ID | Node ID
-   ----------------|---------|---------
-   0 0 0 0 0 0 0 0 |    not allowed
-   0 0 0 0 0 0 0 1 |    1    |    1 
-   0 0 0 0 0 0 1 0 |    2    |    2
-   0 0 0 0 0 0 1 1 |    3    |    3
-       . . .       |         |
-   0 1 0 1 0 1 0 1 |   55    |   85
-       . . .       |         |
-   1 0 1 0 1 0 1 0 |   AA    |  170
-       . . .       |         |  
-   1 1 1 1 1 1 0 1 |   FD    |  253
-   1 1 1 1 1 1 1 0 |   FE    |  254
-   1 1 1 1 1 1 1 1 |   FF    |  255
-
-
-Setting the I/O Base Address
-----------------------------
-
-The first three switches in switch group SW1 are used to select one
-of eight possible I/O Base addresses using the following table
-
-   Switch      | Hex I/O
-    3   2   1  | Address
-   ------------|--------
-   ON  ON  ON  |  260
-   ON  ON  OFF |  290
-   ON  OFF ON  |  2E0  (Manufacturer's default)
-   ON  OFF OFF |  2F0
-   OFF ON  ON  |  300
-   OFF ON  OFF |  350
-   OFF OFF ON  |  380
-   OFF OFF OFF |  3E0
-
-
-Setting the Base Memory (RAM) buffer Address
---------------------------------------------
-
-The memory buffer requires 2K of a 16K block of RAM. The base of this
-16K block can be located in any of eight positions.
-Switches 6-8 of switch group SW1 select the Base of the 16K block.
-Within that 16K address space, the buffer may be assigned any one of four
-positions, determined by the offset, switches 4 and 5 of group SW1.
-
-   Switch     | Hex RAM | Hex ROM
-   8 7 6  5 4 | Address | Address
-   -----------|---------|-----------
-   0 0 0  0 0 |  C0000  |  C2000
-   0 0 0  0 1 |  C0800  |  C2000
-   0 0 0  1 0 |  C1000  |  C2000
-   0 0 0  1 1 |  C1800  |  C2000
-              |         |
-   0 0 1  0 0 |  C4000  |  C6000
-   0 0 1  0 1 |  C4800  |  C6000
-   0 0 1  1 0 |  C5000  |  C6000
-   0 0 1  1 1 |  C5800  |  C6000
-              |         |
-   0 1 0  0 0 |  CC000  |  CE000
-   0 1 0  0 1 |  CC800  |  CE000
-   0 1 0  1 0 |  CD000  |  CE000
-   0 1 0  1 1 |  CD800  |  CE000
-              |         |
-   0 1 1  0 0 |  D0000  |  D2000  (Manufacturer's default)
-   0 1 1  0 1 |  D0800  |  D2000
-   0 1 1  1 0 |  D1000  |  D2000
-   0 1 1  1 1 |  D1800  |  D2000
-              |         |
-   1 0 0  0 0 |  D4000  |  D6000
-   1 0 0  0 1 |  D4800  |  D6000
-   1 0 0  1 0 |  D5000  |  D6000
-   1 0 0  1 1 |  D5800  |  D6000
-              |         |
-   1 0 1  0 0 |  D8000  |  DA000
-   1 0 1  0 1 |  D8800  |  DA000
-   1 0 1  1 0 |  D9000  |  DA000
-   1 0 1  1 1 |  D9800  |  DA000
-              |         |
-   1 1 0  0 0 |  DC000  |  DE000
-   1 1 0  0 1 |  DC800  |  DE000
-   1 1 0  1 0 |  DD000  |  DE000
-   1 1 0  1 1 |  DD800  |  DE000
-              |         |
-   1 1 1  0 0 |  E0000  |  E2000
-   1 1 1  0 1 |  E0800  |  E2000
-   1 1 1  1 0 |  E1000  |  E2000
-   1 1 1  1 1 |  E1800  |  E2000
-  
-
-Setting Interrupt Request Lines (IRQ)
--------------------------------------
-
-??????????????????????????????????????
-
-
-Setting the Timeouts
---------------------
-
-??????????????????????????????????????
-
-
-*****************************************************************************
-
-** No Name **
-8-bit cards ("Made in Taiwan R.O.C.")
------------
-  - from Vojtech Pavlik <vojtech@suse.cz>
-
-I have named this ARCnet card "NONAME", since I got only the card with
-no manual at all and the only text identifying the manufacturer is 
-"MADE IN TAIWAN R.O.C" printed on the card.
-
-          ____________________________________________________________
-         |                 1 2 3 4 5 6 7 8                            |
-         | |o|o| JP1       o|o|o|o|o|o|o|o| ON                        |
-         |  +              o|o|o|o|o|o|o|o|                        ___|
-         |  _____________  o|o|o|o|o|o|o|o| OFF         _____     |   | ID7
-         | |             | SW1                         |     |    |   | ID6
-         | > RAM (2k)    |        ____________________ |  H  |    | S | ID5
-         | |_____________|       |                    ||  y  |    | W | ID4
-         |                       |                    ||  b  |    | 2 | ID3
-         |                       |                    ||  r  |    |   | ID2
-         |                       |                    ||  i  |    |   | ID1
-         |                       |       90C65        ||  d  |    |___| ID0
-         |      SW3              |                    ||     |        |      
-         | |o|o|o|o|o|o|o|o| ON  |                    ||  I  |        |
-         | |o|o|o|o|o|o|o|o|     |                    ||  C  |        |
-         | |o|o|o|o|o|o|o|o| OFF |____________________||     |   _____|
-         |  1 2 3 4 5 6 7 8                            |     |  |     |___
-         |  ______________                             |     |  | BNC |___|
-         | |              |                            |_____|  |_____|
-         | > EPROM SOCKET |                                           |
-         | |______________|                                           |
-         |                                              ______________|
-         |                                             |
-         |_____________________________________________|
-
-Legend:
-
-90C65       ARCNET Chip 
-SW1 1-5:    Base Memory Address Select
-    6-8:    Base I/O Address Select
-SW2 1-8:    Node ID Select (ID0-ID7)
-SW3 1-5:    IRQ Select   
-    6-7:    Extra Timeout
-    8  :    ROM Enable   
-JP1         Led connector
-BNC         Coax connector
-
-Although the jumpers SW1 and SW3 are marked SW, not JP, they are jumpers, not 
-switches.
-
-Setting the jumpers to ON means connecting the upper two pins, off the bottom 
-two - or - in case of IRQ setting, connecting none of them at all.
-
-Setting the Node ID
--------------------
-
-The eight switches in SW2 are used to set the node ID. Each node attached
-to the network must have an unique node ID which must not be 0.
-Switch 1 (ID0) serves as the least significant bit (LSB).
-
-Setting one of the switches to Off means "1", On means "0".
-
-The node ID is the sum of the values of all switches set to "1"  
-These values are:
-
-   Switch | Label | Value
-   -------|-------|-------
-     1    | ID0   |   1
-     2    | ID1   |   2
-     3    | ID2   |   4
-     4    | ID3   |   8
-     5    | ID4   |  16
-     6    | ID5   |  32
-     7    | ID6   |  64
-     8    | ID7   | 128
-
-Some Examples:
-
-    Switch         | Hex     | Decimal 
-   8 7 6 5 4 3 2 1 | Node ID | Node ID
-   ----------------|---------|---------
-   0 0 0 0 0 0 0 0 |    not allowed
-   0 0 0 0 0 0 0 1 |    1    |    1 
-   0 0 0 0 0 0 1 0 |    2    |    2
-   0 0 0 0 0 0 1 1 |    3    |    3
-       . . .       |         |
-   0 1 0 1 0 1 0 1 |   55    |   85
-       . . .       |         |
-   1 0 1 0 1 0 1 0 |   AA    |  170
-       . . .       |         |  
-   1 1 1 1 1 1 0 1 |   FD    |  253
-   1 1 1 1 1 1 1 0 |   FE    |  254
-   1 1 1 1 1 1 1 1 |   FF    |  255
-
-
-Setting the I/O Base Address
-----------------------------
-
-The last three switches in switch block SW1 are used to select one
-of eight possible I/O Base addresses using the following table
-
-
-   Switch      | Hex I/O
-    6   7   8  | Address
-   ------------|--------
-   ON  ON  ON  |  260
-   OFF ON  ON  |  290
-   ON  OFF ON  |  2E0  (Manufacturer's default)
-   OFF OFF ON  |  2F0
-   ON  ON  OFF |  300
-   OFF ON  OFF |  350
-   ON  OFF OFF |  380
-   OFF OFF OFF |  3E0
-
-
-Setting the Base Memory (RAM) buffer Address
---------------------------------------------
-
-The memory buffer (RAM) requires 2K. The base of this buffer can be 
-located in any of eight positions. The address of the Boot Prom is
-memory base + 0x2000.
-Jumpers 3-5 of jumper block SW1 select the Memory Base address.
-
-   Switch              | Hex RAM | Hex ROM
-    1   2   3   4   5  | Address | Address *)
-   --------------------|---------|-----------
-   ON  ON  ON  ON  ON  |  C0000  |  C2000
-   ON  ON  OFF ON  ON  |  C4000  |  C6000
-   ON  ON  ON  OFF ON  |  CC000  |  CE000
-   ON  ON  OFF OFF ON  |  D0000  |  D2000  (Manufacturer's default)
-   ON  ON  ON  ON  OFF |  D4000  |  D6000
-   ON  ON  OFF ON  OFF |  D8000  |  DA000
-   ON  ON  ON  OFF OFF |  DC000  |  DE000
-   ON  ON  OFF OFF OFF |  E0000  |  E2000
-  
-*) To enable the Boot ROM set the jumper 8 of jumper block SW3 to position ON.
-
-The jumpers 1 and 2 probably add 0x0800, 0x1000 and 0x1800 to RAM adders.
-
-Setting the Interrupt Line
---------------------------
-
-Jumpers 1-5 of the jumper block SW3 control the IRQ level.
-
-    Jumper              |  IRQ
-    1   2   3   4   5   |
-   ----------------------------
-    ON  OFF OFF OFF OFF |  2
-    OFF ON  OFF OFF OFF |  3
-    OFF OFF ON  OFF OFF |  4
-    OFF OFF OFF ON  OFF |  5
-    OFF OFF OFF OFF ON  |  7
-
-
-Setting the Timeout Parameters
-------------------------------
-
-The jumpers 6-7 of the jumper block SW3 are used to determine the timeout 
-parameters. These two jumpers are normally left in the OFF position.
-
-
-*****************************************************************************
-
-** No Name **
-(Generic Model 9058)
---------------------
-  - from Andrew J. Kroll <ag784@freenet.buffalo.edu>
-  - Sorry this sat in my to-do box for so long, Andrew! (yikes - over a
-    year!)
-                                                                      _____
-                                                                     |    <
-                                                                     | .---'
-    ________________________________________________________________ | |
-   |                           |     SW2     |                      |  |
-   |   ___________             |_____________|                      |  |
-   |  |           |              1 2 3 4 5 6                     ___|  |
-   |  >  6116 RAM |         _________                         8 |   |  |
-   |  |___________|        |20MHzXtal|                        7 |   |  |
-   |                       |_________|       __________       6 | S |  |
-   |    74LS373                             |          |-     5 | W |  |
-   |   _________                            |      E   |-     4 |   |  |
-   |   >_______|              ______________|..... P   |-     3 | 3 |  |
-   |                         |              |    : O   |-     2 |   |  |
-   |                         |              |    : X   |-     1 |___|  |
-   |   ________________      |              |    : Y   |-           |  |
-   |  |      SW1       |     |      SL90C65 |    :     |-           |  |
-   |  |________________|     |              |    : B   |-           |  |
-   |    1 2 3 4 5 6 7 8      |              |    : O   |-           |  |
-   |                         |_________o____|..../ A   |-    _______|  |
-   |    ____________________                |      R   |-   |       |------,   
-   |   |                    |               |      D   |-   |  BNC  |   #  |
-   |   > 2764 PROM SOCKET   |               |__________|-   |_______|------'
-   |   |____________________|              _________                |  |
-   |                                       >________| <- 74LS245    |  |
-   |                                                                |  |
-   |___                                               ______________|  |
-       |H H H H H H H H H H H H H H H H H H H H H H H|               | |
-       |U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U_U|               | |
-                                                                      \|
-Legend:
-
-SL90C65 	ARCNET Controller / Transceiver /Logic
-SW1	1-5:	IRQ Select
-	  6:	ET1
-	  7:	ET2
-	  8:	ROM ENABLE 
-SW2	1-3:    Memory Buffer/PROM Address
-	3-6:	I/O Address Map
-SW3	1-8:	Node ID Select
-BNC		BNC RG62/U Connection 
-		*I* have had success using RG59B/U with *NO* terminators!
-		What gives?!
-
-SW1: Timeouts, Interrupt and ROM
----------------------------------
-
-To select a hardware interrupt level set one (only one!) of the dip switches
-up (on) SW1...(switches 1-5)
-IRQ3, IRQ4, IRQ5, IRQ7, IRQ2. The Manufacturer's default is IRQ2.
-
-The switches on SW1 labeled EXT1 (switch 6) and EXT2 (switch 7)
-are used to determine the timeout parameters. These two dip switches
-are normally left off (down).
-
-   To enable the 8K Boot PROM position SW1 switch 8 on (UP) labeled ROM.
-   The default is jumper ROM not installed.
-
-
-Setting the I/O Base Address
-----------------------------
-
-The last three switches in switch group SW2 are used to select one
-of eight possible I/O Base addresses using the following table
-
-
-   Switch | Hex I/O
-   4 5 6  | Address
-   -------|--------
-   0 0 0  |  260
-   0 0 1  |  290
-   0 1 0  |  2E0  (Manufacturer's default)
-   0 1 1  |  2F0
-   1 0 0  |  300
-   1 0 1  |  350
-   1 1 0  |  380
-   1 1 1  |  3E0
-
-
-Setting the Base Memory Address (RAM & ROM)
--------------------------------------------
-
-The memory buffer requires 2K of a 16K block of RAM. The base of this
-16K block can be located in any of eight positions.
-Switches 1-3 of switch group SW2 select the Base of the 16K block.
-(0 = DOWN, 1 = UP)
-I could, however, only verify two settings...
-
-   Switch| Hex RAM | Hex ROM
-   1 2 3 | Address | Address
-   ------|---------|-----------
-   0 0 0 |  E0000  |  E2000
-   0 0 1 |  D0000  |  D2000  (Manufacturer's default)
-   0 1 0 |  ?????  |  ?????
-   0 1 1 |  ?????  |  ?????  
-   1 0 0 |  ?????  |  ?????
-   1 0 1 |  ?????  |  ?????
-   1 1 0 |  ?????  |  ?????
-   1 1 1 |  ?????  |  ?????
-
-
-Setting the Node ID
--------------------
-
-The eight switches in group SW3 are used to set the node ID.
-Each node attached to the network must have an unique node ID which
-must be different from 0.
-Switch 1 serves as the least significant bit (LSB).
-switches in the DOWN position are OFF (0) and in the UP position are ON (1)
-
-The node ID is the sum of the values of all switches set to "1"  
-These values are:
-    Switch | Value
-    -------|-------
-      1    |   1
-      2    |   2
-      3    |   4
-      4    |   8
-      5    |  16
-      6    |  32
-      7    |  64
-      8    | 128
-
-Some Examples:
-
-    Switch#     |   Hex   | Decimal 
-8 7 6 5 4 3 2 1 | Node ID | Node ID
-----------------|---------|---------
-0 0 0 0 0 0 0 0 |    not allowed  <-.
-0 0 0 0 0 0 0 1 |    1    |    1    | 
-0 0 0 0 0 0 1 0 |    2    |    2    |
-0 0 0 0 0 0 1 1 |    3    |    3    |
-    . . .       |         |         |
-0 1 0 1 0 1 0 1 |   55    |   85    |
-    . . .       |         |         + Don't use 0 or 255!
-1 0 1 0 1 0 1 0 |   AA    |  170    |
-    . . .       |         |         |
-1 1 1 1 1 1 0 1 |   FD    |  253    |
-1 1 1 1 1 1 1 0 |   FE    |  254    |
-1 1 1 1 1 1 1 1 |   FF    |  255  <-'
-  
-
-*****************************************************************************
-
-** Tiara **
-(model unknown)
--------------------------
-  - from Christoph Lameter <christoph@lameter.com>
-  
-
-Here is information about my card as far as I could figure it out:
------------------------------------------------ tiara
-Tiara LanCard of Tiara Computer Systems.
-
-+----------------------------------------------+
-!           ! Transmitter Unit !               !
-!           +------------------+             -------
-!          MEM                              Coax Connector
-!  ROM    7654321 <- I/O                     -------
-!  :  :   +--------+                           !
-!  :  :   ! 90C66LJ!                         +++
-!  :  :   !        !                         !D  Switch to set
-!  :  :   !        !                         !I  the Nodenumber
-!  :  :   +--------+                         !P
-!                                            !++
-!         234567 <- IRQ                      !
-+------------!!!!!!!!!!!!!!!!!!!!!!!!--------+
-             !!!!!!!!!!!!!!!!!!!!!!!!
-
-0 = Jumper Installed
-1 = Open
-
-Top Jumper line Bit 7 = ROM Enable 654=Memory location 321=I/O
-
-Settings for Memory Location (Top Jumper Line)
-456     Address selected
-000	C0000
-001     C4000
-010     CC000
-011     D0000
-100     D4000
-101     D8000
-110     DC000     
-111     E0000
-
-Settings for I/O Address (Top Jumper Line)
-123     Port
-000	260
-001	290
-010	2E0
-011	2F0
-100	300
-101	350
-110	380
-111	3E0
-
-Settings for IRQ Selection (Lower Jumper Line)
-234567
-011111 IRQ 2
-101111 IRQ 3
-110111 IRQ 4
-111011 IRQ 5
-111110 IRQ 7
-
-*****************************************************************************
-
-
-Other Cards
------------
-
-I have no information on other models of ARCnet cards at the moment.  Please
-send any and all info to:
-	apenwarr@worldvisions.ca
-
-Thanks.
diff --git a/Documentation/networking/arcnet.rst b/Documentation/networking/arcnet.rst
new file mode 100644
index 000000000000..e93d9820f0f1
--- /dev/null
+++ b/Documentation/networking/arcnet.rst
@@ -0,0 +1,594 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======
+ARCnet
+======
+
+.. note::
+
+   See also arcnet-hardware.txt in this directory for jumper-setting
+   and cabling information if you're like many of us and didn't happen to get a
+   manual with your ARCnet card.
+
+Since no one seems to listen to me otherwise, perhaps a poem will get your
+attention::
+
+		This driver's getting fat and beefy,
+		But my cat is still named Fifi.
+
+Hmm, I think I'm allowed to call that a poem, even though it's only two
+lines.  Hey, I'm in Computer Science, not English.  Give me a break.
+
+The point is:  I REALLY REALLY REALLY REALLY REALLY want to hear from you if
+you test this and get it working.  Or if you don't.  Or anything.
+
+ARCnet 0.32 ALPHA first made it into the Linux kernel 1.1.80 - this was
+nice, but after that even FEWER people started writing to me because they
+didn't even have to install the patch.  <sigh>
+
+Come on, be a sport!  Send me a success report!
+
+(hey, that was even better than my original poem... this is getting bad!)
+
+
+.. warning::
+
+   If you don't e-mail me about your success/failure soon, I may be forced to
+   start SINGING.  And we don't want that, do we?
+
+   (You know, it might be argued that I'm pushing this point a little too much.
+   If you think so, why not flame me in a quick little e-mail?  Please also
+   include the type of card(s) you're using, software, size of network, and
+   whether it's working or not.)
+
+   My e-mail address is: apenwarr@worldvisions.ca
+
+These are the ARCnet drivers for Linux.
+
+This new release (2.91) has been put together by David Woodhouse
+<dwmw2@infradead.org>, in an attempt to tidy up the driver after adding support
+for yet another chipset. Now the generic support has been separated from the
+individual chipset drivers, and the source files aren't quite so packed with
+#ifdefs! I've changed this file a bit, but kept it in the first person from
+Avery, because I didn't want to completely rewrite it.
+
+The previous release resulted from many months of on-and-off effort from me
+(Avery Pennarun), many bug reports/fixes and suggestions from others, and in
+particular a lot of input and coding from Tomasz Motylewski.  Starting with
+ARCnet 2.10 ALPHA, Tomasz's all-new-and-improved RFC1051 support has been
+included and seems to be working fine!
+
+
+Where do I discuss these drivers?
+---------------------------------
+
+Tomasz has been so kind as to set up a new and improved mailing list.
+Subscribe by sending a message with the BODY "subscribe linux-arcnet YOUR
+REAL NAME" to listserv@tichy.ch.uj.edu.pl.  Then, to submit messages to the
+list, mail to linux-arcnet@tichy.ch.uj.edu.pl.
+
+There are archives of the mailing list at:
+
+	http://epistolary.org/mailman/listinfo.cgi/arcnet
+
+The people on linux-net@vger.kernel.org (now defunct, replaced by
+netdev@vger.kernel.org) have also been known to be very helpful, especially
+when we're talking about ALPHA Linux kernels that may or may not work right
+in the first place.
+
+
+Other Drivers and Info
+----------------------
+
+You can try my ARCNET page on the World Wide Web at:
+
+	http://www.qis.net/~jschmitz/arcnet/
+
+Also, SMC (one of the companies that makes ARCnet cards) has a WWW site you
+might be interested in, which includes several drivers for various cards
+including ARCnet.  Try:
+
+	http://www.smc.com/
+
+Performance Technologies makes various network software that supports
+ARCnet:
+
+	http://www.perftech.com/ or ftp to ftp.perftech.com.
+
+Novell makes a networking stack for DOS which includes ARCnet drivers.  Try
+FTPing to ftp.novell.com.
+
+You can get the Crynwr packet driver collection (including arcether.com, the
+one you'll want to use with ARCnet cards) from
+oak.oakland.edu:/simtel/msdos/pktdrvr. It won't work perfectly on a 386+
+without patches, though, and also doesn't like several cards.  Fixed
+versions are available on my WWW page, or via e-mail if you don't have WWW
+access.
+
+
+Installing the Driver
+---------------------
+
+All you will need to do in order to install the driver is::
+
+	make config
+		(be sure to choose ARCnet in the network devices
+		and at least one chipset driver.)
+	make clean
+	make zImage
+
+If you obtained this ARCnet package as an upgrade to the ARCnet driver in
+your current kernel, you will need to first copy arcnet.c over the one in
+the linux/drivers/net directory.
+
+You will know the driver is installed properly if you get some ARCnet
+messages when you reboot into the new Linux kernel.
+
+There are four chipset options:
+
+ 1. Standard ARCnet COM90xx chipset.
+
+This is the normal ARCnet card, which you've probably got. This is the only
+chipset driver which will autoprobe if not told where the card is.
+It following options on the command line::
+
+ com90xx=[<io>[,<irq>[,<shmem>]]][,<name>] | <name>
+
+If you load the chipset support as a module, the options are::
+
+ io=<io> irq=<irq> shmem=<shmem> device=<name>
+
+To disable the autoprobe, just specify "com90xx=" on the kernel command line.
+To specify the name alone, but allow autoprobe, just put "com90xx=<name>"
+
+ 2. ARCnet COM20020 chipset.
+
+This is the new chipset from SMC with support for promiscuous mode (packet
+sniffing), extra diagnostic information, etc. Unfortunately, there is no
+sensible method of autoprobing for these cards. You must specify the I/O
+address on the kernel command line.
+
+The command line options are::
+
+ com20020=<io>[,<irq>[,<node_ID>[,backplane[,CKP[,timeout]]]]][,name]
+
+If you load the chipset support as a module, the options are::
+
+ io=<io> irq=<irq> node=<node_ID> backplane=<backplane> clock=<CKP>
+ timeout=<timeout> device=<name>
+
+The COM20020 chipset allows you to set the node ID in software, overriding the
+default which is still set in DIP switches on the card. If you don't have the
+COM20020 data sheets, and you don't know what the other three options refer
+to, then they won't interest you - forget them.
+
+ 3. ARCnet COM90xx chipset in IO-mapped mode.
+
+This will also work with the normal ARCnet cards, but doesn't use the shared
+memory. It performs less well than the above driver, but is provided in case
+you have a card which doesn't support shared memory, or (strangely) in case
+you have so many ARCnet cards in your machine that you run out of shmem slots.
+If you don't give the IO address on the kernel command line, then the driver
+will not find the card.
+
+The command line options are::
+
+ com90io=<io>[,<irq>][,<name>]
+
+If you load the chipset support as a module, the options are:
+ io=<io> irq=<irq> device=<name>
+
+ 4. ARCnet RIM I cards.
+
+These are COM90xx chips which are _completely_ memory mapped. The support for
+these is not tested. If you have one, please mail the author with a success
+report. All options must be specified, except the device name.
+Command line options::
+
+ arcrimi=<shmem>,<irq>,<node_ID>[,<name>]
+
+If you load the chipset support as a module, the options are::
+
+ shmem=<shmem> irq=<irq> node=<node_ID> device=<name>
+
+
+Loadable Module Support
+-----------------------
+
+Configure and rebuild Linux.  When asked, answer 'm' to "Generic ARCnet
+support" and to support for your ARCnet chipset if you want to use the
+loadable module. You can also say 'y' to "Generic ARCnet support" and 'm'
+to the chipset support if you wish.
+
+::
+
+	make config
+	make clean
+	make zImage
+	make modules
+
+If you're using a loadable module, you need to use insmod to load it, and
+you can specify various characteristics of your card on the command
+line.  (In recent versions of the driver, autoprobing is much more reliable
+and works as a module, so most of this is now unnecessary.)
+
+For example::
+
+	cd /usr/src/linux/modules
+	insmod arcnet.o
+	insmod com90xx.o
+	insmod com20020.o io=0x2e0 device=eth1
+
+
+Using the Driver
+----------------
+
+If you build your kernel with ARCnet COM90xx support included, it should
+probe for your card automatically when you boot. If you use a different
+chipset driver complied into the kernel, you must give the necessary options
+on the kernel command line, as detailed above.
+
+Go read the NET-2-HOWTO and ETHERNET-HOWTO for Linux; they should be
+available where you picked up this driver.  Think of your ARCnet as a
+souped-up (or down, as the case may be) Ethernet card.
+
+By the way, be sure to change all references from "eth0" to "arc0" in the
+HOWTOs.  Remember that ARCnet isn't a "true" Ethernet, and the device name
+is DIFFERENT.
+
+
+Multiple Cards in One Computer
+------------------------------
+
+Linux has pretty good support for this now, but since I've been busy, the
+ARCnet driver has somewhat suffered in this respect. COM90xx support, if
+compiled into the kernel, will (try to) autodetect all the installed cards.
+
+If you have other cards, with support compiled into the kernel, then you can
+just repeat the options on the kernel command line, e.g.::
+
+	LILO: linux com20020=0x2e0 com20020=0x380 com90io=0x260
+
+If you have the chipset support built as a loadable module, then you need to
+do something like this::
+
+	insmod -o arc0 com90xx
+	insmod -o arc1 com20020 io=0x2e0
+	insmod -o arc2 com90xx
+
+The ARCnet drivers will now sort out their names automatically.
+
+
+How do I get it to work with...?
+--------------------------------
+
+NFS:
+	Should be fine linux->linux, just pretend you're using Ethernet cards.
+	oak.oakland.edu:/simtel/msdos/nfs has some nice DOS clients.  There
+	is also a DOS-based NFS server called SOSS.  It doesn't multitask
+	quite the way Linux does (actually, it doesn't multitask AT ALL) but
+	you never know what you might need.
+
+	With AmiTCP (and possibly others), you may need to set the following
+	options in your Amiga nfstab:  MD 1024 MR 1024 MW 1024
+	(Thanks to Christian Gottschling <ferksy@indigo.tng.oche.de>
+	for this.)
+
+	Probably these refer to maximum NFS data/read/write block sizes.  I
+	don't know why the defaults on the Amiga didn't work; write to me if
+	you know more.
+
+DOS:
+	If you're using the freeware arcether.com, you might want to install
+	the driver patch from my web page.  It helps with PC/TCP, and also
+	can get arcether to load if it timed out too quickly during
+	initialization.  In fact, if you use it on a 386+ you REALLY need
+	the patch, really.
+
+Windows:
+	See DOS :)  Trumpet Winsock works fine with either the Novell or
+	Arcether client, assuming you remember to load winpkt of course.
+
+LAN Manager and Windows for Workgroups:
+	These programs use protocols that
+	are incompatible with the Internet standard.  They try to pretend
+	the cards are Ethernet, and confuse everyone else on the network.
+
+	However, v2.00 and higher of the Linux ARCnet driver supports this
+	protocol via the 'arc0e' device.  See the section on "Multiprotocol
+	Support" for more information.
+
+	Using the freeware Samba server and clients for Linux, you can now
+	interface quite nicely with TCP/IP-based WfWg or Lan Manager
+	networks.
+
+Windows 95:
+	Tools are included with Win95 that let you use either the LANMAN
+	style network drivers (NDIS) or Novell drivers (ODI) to handle your
+	ARCnet packets.  If you use ODI, you'll need to use the 'arc0'
+	device with Linux.  If you use NDIS, then try the 'arc0e' device.
+	See the "Multiprotocol Support" section below if you need arc0e,
+	you're completely insane, and/or you need to build some kind of
+	hybrid network that uses both encapsulation types.
+
+OS/2:
+	I've been told it works under Warp Connect with an ARCnet driver from
+	SMC.  You need to use the 'arc0e' interface for this.  If you get
+	the SMC driver to work with the TCP/IP stuff included in the
+	"normal" Warp Bonus Pack, let me know.
+
+	ftp.microsoft.com also has a freeware "Lan Manager for OS/2" client
+	which should use the same protocol as WfWg does.  I had no luck
+	installing it under Warp, however.  Please mail me with any results.
+
+NetBSD/AmiTCP:
+	These use an old version of the Internet standard ARCnet
+	protocol (RFC1051) which is compatible with the Linux driver v2.10
+	ALPHA and above using the arc0s device. (See "Multiprotocol ARCnet"
+	below.)  ** Newer versions of NetBSD apparently support RFC1201.
+
+
+Using Multiprotocol ARCnet
+--------------------------
+
+The ARCnet driver v2.10 ALPHA supports three protocols, each on its own
+"virtual network device":
+
+	======  ===============================================================
+	arc0	RFC1201 protocol, the official Internet standard which just
+		happens to be 100% compatible with Novell's TRXNET driver.
+		Version 1.00 of the ARCnet driver supported _only_ this
+		protocol.  arc0 is the fastest of the three protocols (for
+		whatever reason), and allows larger packets to be used
+		because it supports RFC1201 "packet splitting" operations.
+		Unless you have a specific need to use a different protocol,
+		I strongly suggest that you stick with this one.
+
+	arc0e	"Ethernet-Encapsulation" which sends packets over ARCnet
+		that are actually a lot like Ethernet packets, including the
+		6-byte hardware addresses.  This protocol is compatible with
+		Microsoft's NDIS ARCnet driver, like the one in WfWg and
+		LANMAN.  Because the MTU of 493 is actually smaller than the
+		one "required" by TCP/IP (576), there is a chance that some
+		network operations will not function properly.  The Linux
+		TCP/IP layer can compensate in most cases, however, by
+		automatically fragmenting the TCP/IP packets to make them
+		fit.  arc0e also works slightly more slowly than arc0, for
+		reasons yet to be determined.  (Probably it's the smaller
+		MTU that does it.)
+
+	arc0s	The "[s]imple" RFC1051 protocol is the "previous" Internet
+		standard that is completely incompatible with the new
+		standard.  Some software today, however, continues to
+		support the old standard (and only the old standard)
+		including NetBSD and AmiTCP.  RFC1051 also does not support
+		RFC1201's packet splitting, and the MTU of 507 is still
+		smaller than the Internet "requirement," so it's quite
+		possible that you may run into problems.  It's also slower
+		than RFC1201 by about 25%, for the same reason as arc0e.
+
+		The arc0s support was contributed by Tomasz Motylewski
+		and modified somewhat by me.  Bugs are probably my fault.
+	======  ===============================================================
+
+You can choose not to compile arc0e and arc0s into the driver if you want -
+this will save you a bit of memory and avoid confusion when eg. trying to
+use the "NFS-root" stuff in recent Linux kernels.
+
+The arc0e and arc0s devices are created automatically when you first
+ifconfig the arc0 device.  To actually use them, though, you need to also
+ifconfig the other virtual devices you need.  There are a number of ways you
+can set up your network then:
+
+
+1. Single Protocol.
+
+   This is the simplest way to configure your network: use just one of the
+   two available protocols.  As mentioned above, it's a good idea to use
+   only arc0 unless you have a good reason (like some other software, ie.
+   WfWg, that only works with arc0e).
+
+   If you need only arc0, then the following commands should get you going::
+
+	ifconfig arc0 MY.IP.ADD.RESS
+	route add MY.IP.ADD.RESS arc0
+	route add -net SUB.NET.ADD.RESS arc0
+	[add other local routes here]
+
+   If you need arc0e (and only arc0e), it's a little different::
+
+	ifconfig arc0 MY.IP.ADD.RESS
+	ifconfig arc0e MY.IP.ADD.RESS
+	route add MY.IP.ADD.RESS arc0e
+	route add -net SUB.NET.ADD.RESS arc0e
+
+   arc0s works much the same way as arc0e.
+
+
+2. More than one protocol on the same wire.
+
+   Now things start getting confusing.  To even try it, you may need to be
+   partly crazy.  Here's what *I* did. :) Note that I don't include arc0s in
+   my home network; I don't have any NetBSD or AmiTCP computers, so I only
+   use arc0s during limited testing.
+
+   I have three computers on my home network; two Linux boxes (which prefer
+   RFC1201 protocol, for reasons listed above), and one XT that can't run
+   Linux but runs the free Microsoft LANMAN Client instead.
+
+   Worse, one of the Linux computers (freedom) also has a modem and acts as
+   a router to my Internet provider.  The other Linux box (insight) also has
+   its own IP address and needs to use freedom as its default gateway.  The
+   XT (patience), however, does not have its own Internet IP address and so
+   I assigned it one on a "private subnet" (as defined by RFC1597).
+
+   To start with, take a simple network with just insight and freedom.
+   Insight needs to:
+
+	- talk to freedom via RFC1201 (arc0) protocol, because I like it
+	  more and it's faster.
+	- use freedom as its Internet gateway.
+
+   That's pretty easy to do.  Set up insight like this::
+
+	ifconfig arc0 insight
+	route add insight arc0
+	route add freedom arc0	/* I would use the subnet here (like I said
+					to to in "single protocol" above),
+					but the rest of the subnet
+					unfortunately lies across the PPP
+					link on freedom, which confuses
+					things. */
+	route add default gw freedom
+
+   And freedom gets configured like so::
+
+	ifconfig arc0 freedom
+	route add freedom arc0
+	route add insight arc0
+	/* and default gateway is configured by pppd */
+
+   Great, now insight talks to freedom directly on arc0, and sends packets
+   to the Internet through freedom.  If you didn't know how to do the above,
+   you should probably stop reading this section now because it only gets
+   worse.
+
+   Now, how do I add patience into the network?  It will be using LANMAN
+   Client, which means I need the arc0e device.  It needs to be able to talk
+   to both insight and freedom, and also use freedom as a gateway to the
+   Internet.  (Recall that patience has a "private IP address" which won't
+   work on the Internet; that's okay, I configured Linux IP masquerading on
+   freedom for this subnet).
+
+   So patience (necessarily; I don't have another IP number from my
+   provider) has an IP address on a different subnet than freedom and
+   insight, but needs to use freedom as an Internet gateway.  Worse, most
+   DOS networking programs, including LANMAN, have braindead networking
+   schemes that rely completely on the netmask and a 'default gateway' to
+   determine how to route packets.  This means that to get to freedom or
+   insight, patience WILL send through its default gateway, regardless of
+   the fact that both freedom and insight (courtesy of the arc0e device)
+   could understand a direct transmission.
+
+   I compensate by giving freedom an extra IP address - aliased 'gatekeeper' -
+   that is on my private subnet, the same subnet that patience is on.  I
+   then define gatekeeper to be the default gateway for patience.
+
+   To configure freedom (in addition to the commands above)::
+
+	ifconfig arc0e gatekeeper
+	route add gatekeeper arc0e
+	route add patience arc0e
+
+   This way, freedom will send all packets for patience through arc0e,
+   giving its IP address as gatekeeper (on the private subnet).  When it
+   talks to insight or the Internet, it will use its "freedom" Internet IP
+   address.
+
+   You will notice that we haven't configured the arc0e device on insight.
+   This would work, but is not really necessary, and would require me to
+   assign insight another special IP number from my private subnet.  Since
+   both insight and patience are using freedom as their default gateway, the
+   two can already talk to each other.
+
+   It's quite fortunate that I set things up like this the first time (cough
+   cough) because it's really handy when I boot insight into DOS.  There, it
+   runs the Novell ODI protocol stack, which only works with RFC1201 ARCnet.
+   In this mode it would be impossible for insight to communicate directly
+   with patience, since the Novell stack is incompatible with Microsoft's
+   Ethernet-Encap.  Without changing any settings on freedom or patience, I
+   simply set freedom as the default gateway for insight (now in DOS,
+   remember) and all the forwarding happens "automagically" between the two
+   hosts that would normally not be able to communicate at all.
+
+   For those who like diagrams, I have created two "virtual subnets" on the
+   same physical ARCnet wire.  You can picture it like this::
+
+
+	  [RFC1201 NETWORK]                   [ETHER-ENCAP NETWORK]
+      (registered Internet subnet)           (RFC1597 private subnet)
+
+			     (IP Masquerade)
+	  /---------------\         *            /---------------\
+	  |               |         *            |               |
+	  |               +-Freedom-*-Gatekeeper-+               |
+	  |               |    |    *            |               |
+	  \-------+-------/    |    *            \-------+-------/
+		  |            |                         |
+	       Insight         |                      Patience
+			   (Internet)
+
+
+
+It works: what now?
+-------------------
+
+Send mail describing your setup, preferably including driver version, kernel
+version, ARCnet card model, CPU type, number of systems on your network, and
+list of software in use to me at the following address:
+
+	apenwarr@worldvisions.ca
+
+I do send (sometimes automated) replies to all messages I receive.  My email
+can be weird (and also usually gets forwarded all over the place along the
+way to me), so if you don't get a reply within a reasonable time, please
+resend.
+
+
+It doesn't work: what now?
+--------------------------
+
+Do the same as above, but also include the output of the ifconfig and route
+commands, as well as any pertinent log entries (ie. anything that starts
+with "arcnet:" and has shown up since the last reboot) in your mail.
+
+If you want to try fixing it yourself (I strongly recommend that you mail me
+about the problem first, since it might already have been solved) you may
+want to try some of the debug levels available.  For heavy testing on
+D_DURING or more, it would be a REALLY good idea to kill your klogd daemon
+first!  D_DURING displays 4-5 lines for each packet sent or received.  D_TX,
+D_RX, and D_SKB actually DISPLAY each packet as it is sent or received,
+which is obviously quite big.
+
+Starting with v2.40 ALPHA, the autoprobe routines have changed
+significantly.  In particular, they won't tell you why the card was not
+found unless you turn on the D_INIT_REASONS debugging flag.
+
+Once the driver is running, you can run the arcdump shell script (available
+from me or in the full ARCnet package, if you have it) as root to list the
+contents of the arcnet buffers at any time.  To make any sense at all out of
+this, you should grab the pertinent RFCs. (some are listed near the top of
+arcnet.c).  arcdump assumes your card is at 0xD0000.  If it isn't, edit the
+script.
+
+Buffers 0 and 1 are used for receiving, and Buffers 2 and 3 are for sending.
+Ping-pong buffers are implemented both ways.
+
+If your debug level includes D_DURING and you did NOT define SLOW_XMIT_COPY,
+the buffers are cleared to a constant value of 0x42 every time the card is
+reset (which should only happen when you do an ifconfig up, or when Linux
+decides that the driver is broken).  During a transmit, unused parts of the
+buffer will be cleared to 0x42 as well.  This is to make it easier to figure
+out which bytes are being used by a packet.
+
+You can change the debug level without recompiling the kernel by typing::
+
+	ifconfig arc0 down metric 1xxx
+	/etc/rc.d/rc.inet1
+
+where "xxx" is the debug level you want.  For example, "metric 1015" would put
+you at debug level 15.  Debug level 7 is currently the default.
+
+Note that the debug level is (starting with v1.90 ALPHA) a binary
+combination of different debug flags; so debug level 7 is really 1+2+4 or
+D_NORMAL+D_EXTRA+D_INIT.  To include D_DURING, you would add 16 to this,
+resulting in debug level 23.
+
+If you don't understand that, you probably don't want to know anyway.
+E-mail me about your problem.
+
+
+I want to send money: what now?
+-------------------------------
+
+Go take a nap or something.  You'll feel better in the morning.
diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt
deleted file mode 100644
index aff97f47c05c..000000000000
--- a/Documentation/networking/arcnet.txt
+++ /dev/null
@@ -1,556 +0,0 @@
-----------------------------------------------------------------------------
-NOTE:  See also arcnet-hardware.txt in this directory for jumper-setting
-and cabling information if you're like many of us and didn't happen to get a
-manual with your ARCnet card.
-----------------------------------------------------------------------------
-
-Since no one seems to listen to me otherwise, perhaps a poem will get your
-attention:
-		This driver's getting fat and beefy,
-		But my cat is still named Fifi.
-
-Hmm, I think I'm allowed to call that a poem, even though it's only two
-lines.  Hey, I'm in Computer Science, not English.  Give me a break.
-
-The point is:  I REALLY REALLY REALLY REALLY REALLY want to hear from you if
-you test this and get it working.  Or if you don't.  Or anything.
-
-ARCnet 0.32 ALPHA first made it into the Linux kernel 1.1.80 - this was
-nice, but after that even FEWER people started writing to me because they
-didn't even have to install the patch.  <sigh>
-
-Come on, be a sport!  Send me a success report!
-
-(hey, that was even better than my original poem... this is getting bad!)
-
-
---------
-WARNING:
---------
-
-If you don't e-mail me about your success/failure soon, I may be forced to
-start SINGING.  And we don't want that, do we?
-
-(You know, it might be argued that I'm pushing this point a little too much. 
-If you think so, why not flame me in a quick little e-mail?  Please also
-include the type of card(s) you're using, software, size of network, and
-whether it's working or not.)
-
-My e-mail address is: apenwarr@worldvisions.ca
-
-
----------------------------------------------------------------------------
-
-			
-These are the ARCnet drivers for Linux.
-
-
-This new release (2.91) has been put together by David Woodhouse 
-<dwmw2@infradead.org>, in an attempt to tidy up the driver after adding support
-for yet another chipset. Now the generic support has been separated from the
-individual chipset drivers, and the source files aren't quite so packed with
-#ifdefs! I've changed this file a bit, but kept it in the first person from
-Avery, because I didn't want to completely rewrite it.
-
-The previous release resulted from many months of on-and-off effort from me
-(Avery Pennarun), many bug reports/fixes and suggestions from others, and in
-particular a lot of input and coding from Tomasz Motylewski.  Starting with
-ARCnet 2.10 ALPHA, Tomasz's all-new-and-improved RFC1051 support has been
-included and seems to be working fine!
-
-
-Where do I discuss these drivers?
----------------------------------
-
-Tomasz has been so kind as to set up a new and improved mailing list. 
-Subscribe by sending a message with the BODY "subscribe linux-arcnet YOUR
-REAL NAME" to listserv@tichy.ch.uj.edu.pl.  Then, to submit messages to the
-list, mail to linux-arcnet@tichy.ch.uj.edu.pl.
-
-There are archives of the mailing list at:
-	http://epistolary.org/mailman/listinfo.cgi/arcnet
-
-The people on linux-net@vger.kernel.org (now defunct, replaced by
-netdev@vger.kernel.org) have also been known to be very helpful, especially
-when we're talking about ALPHA Linux kernels that may or may not work right
-in the first place.
-
-
-Other Drivers and Info
-----------------------
-
-You can try my ARCNET page on the World Wide Web at:
-	http://www.qis.net/~jschmitz/arcnet/	
-
-Also, SMC (one of the companies that makes ARCnet cards) has a WWW site you
-might be interested in, which includes several drivers for various cards
-including ARCnet.  Try:
-	http://www.smc.com/
-	
-Performance Technologies makes various network software that supports
-ARCnet:
-	http://www.perftech.com/ or ftp to ftp.perftech.com.
-	
-Novell makes a networking stack for DOS which includes ARCnet drivers.  Try
-FTPing to ftp.novell.com.
-
-You can get the Crynwr packet driver collection (including arcether.com, the
-one you'll want to use with ARCnet cards) from
-oak.oakland.edu:/simtel/msdos/pktdrvr. It won't work perfectly on a 386+
-without patches, though, and also doesn't like several cards.  Fixed
-versions are available on my WWW page, or via e-mail if you don't have WWW
-access. 
-
-
-Installing the Driver
----------------------
-
-All you will need to do in order to install the driver is:
-	make config
-		(be sure to choose ARCnet in the network devices 
-		and at least one chipset driver.)
-	make clean
-	make zImage
-	
-If you obtained this ARCnet package as an upgrade to the ARCnet driver in
-your current kernel, you will need to first copy arcnet.c over the one in
-the linux/drivers/net directory.
-
-You will know the driver is installed properly if you get some ARCnet
-messages when you reboot into the new Linux kernel.
-
-There are four chipset options:
-
- 1. Standard ARCnet COM90xx chipset.
-
-This is the normal ARCnet card, which you've probably got. This is the only
-chipset driver which will autoprobe if not told where the card is.
-It following options on the command line:
- com90xx=[<io>[,<irq>[,<shmem>]]][,<name>] | <name>
-
-If you load the chipset support as a module, the options are:
- io=<io> irq=<irq> shmem=<shmem> device=<name>
-
-To disable the autoprobe, just specify "com90xx=" on the kernel command line.
-To specify the name alone, but allow autoprobe, just put "com90xx=<name>"
-
- 2. ARCnet COM20020 chipset.
-
-This is the new chipset from SMC with support for promiscuous mode (packet 
-sniffing), extra diagnostic information, etc. Unfortunately, there is no
-sensible method of autoprobing for these cards. You must specify the I/O
-address on the kernel command line.
-The command line options are:
- com20020=<io>[,<irq>[,<node_ID>[,backplane[,CKP[,timeout]]]]][,name]
-
-If you load the chipset support as a module, the options are:
- io=<io> irq=<irq> node=<node_ID> backplane=<backplane> clock=<CKP>
- timeout=<timeout> device=<name>
-
-The COM20020 chipset allows you to set the node ID in software, overriding the
-default which is still set in DIP switches on the card. If you don't have the
-COM20020 data sheets, and you don't know what the other three options refer
-to, then they won't interest you - forget them.
-
- 3. ARCnet COM90xx chipset in IO-mapped mode.
-
-This will also work with the normal ARCnet cards, but doesn't use the shared
-memory. It performs less well than the above driver, but is provided in case
-you have a card which doesn't support shared memory, or (strangely) in case
-you have so many ARCnet cards in your machine that you run out of shmem slots.
-If you don't give the IO address on the kernel command line, then the driver
-will not find the card.
-The command line options are:
- com90io=<io>[,<irq>][,<name>] 
-
-If you load the chipset support as a module, the options are:
- io=<io> irq=<irq> device=<name>
-
- 4. ARCnet RIM I cards.
-
-These are COM90xx chips which are _completely_ memory mapped. The support for
-these is not tested. If you have one, please mail the author with a success 
-report. All options must be specified, except the device name.
-Command line options:
- arcrimi=<shmem>,<irq>,<node_ID>[,<name>]
-
-If you load the chipset support as a module, the options are:
- shmem=<shmem> irq=<irq> node=<node_ID> device=<name>
-
-
-Loadable Module Support
------------------------
-
-Configure and rebuild Linux.  When asked, answer 'm' to "Generic ARCnet 
-support" and to support for your ARCnet chipset if you want to use the
-loadable module. You can also say 'y' to "Generic ARCnet support" and 'm' 
-to the chipset support if you wish.
-
-	make config
-	make clean	
-	make zImage
-	make modules
-	
-If you're using a loadable module, you need to use insmod to load it, and
-you can specify various characteristics of your card on the command
-line.  (In recent versions of the driver, autoprobing is much more reliable
-and works as a module, so most of this is now unnecessary.)
-
-For example:
-	cd /usr/src/linux/modules
-	insmod arcnet.o
-	insmod com90xx.o
-	insmod com20020.o io=0x2e0 device=eth1
-	
-
-Using the Driver
-----------------
-
-If you build your kernel with ARCnet COM90xx support included, it should 
-probe for your card automatically when you boot. If you use a different
-chipset driver complied into the kernel, you must give the necessary options
-on the kernel command line, as detailed above.
-
-Go read the NET-2-HOWTO and ETHERNET-HOWTO for Linux; they should be
-available where you picked up this driver.  Think of your ARCnet as a
-souped-up (or down, as the case may be) Ethernet card.
-
-By the way, be sure to change all references from "eth0" to "arc0" in the
-HOWTOs.  Remember that ARCnet isn't a "true" Ethernet, and the device name
-is DIFFERENT.
-
-
-Multiple Cards in One Computer
-------------------------------
-
-Linux has pretty good support for this now, but since I've been busy, the
-ARCnet driver has somewhat suffered in this respect. COM90xx support, if 
-compiled into the kernel, will (try to) autodetect all the installed cards. 
-
-If you have other cards, with support compiled into the kernel, then you can 
-just repeat the options on the kernel command line, e.g.:
-LILO: linux com20020=0x2e0 com20020=0x380 com90io=0x260
-
-If you have the chipset support built as a loadable module, then you need to 
-do something like this:
-	insmod -o arc0 com90xx
-	insmod -o arc1 com20020 io=0x2e0
-	insmod -o arc2 com90xx
-The ARCnet drivers will now sort out their names automatically.
-
-
-How do I get it to work with...?
---------------------------------
-
-NFS: Should be fine linux->linux, just pretend you're using Ethernet cards. 
-        oak.oakland.edu:/simtel/msdos/nfs has some nice DOS clients.  There
-        is also a DOS-based NFS server called SOSS.  It doesn't multitask
-        quite the way Linux does (actually, it doesn't multitask AT ALL) but
-        you never know what you might need.
-        
-        With AmiTCP (and possibly others), you may need to set the following
-        options in your Amiga nfstab:  MD 1024 MR 1024 MW 1024
-        (Thanks to Christian Gottschling <ferksy@indigo.tng.oche.de>
-	for this.)
-	
-	Probably these refer to maximum NFS data/read/write block sizes.  I
-	don't know why the defaults on the Amiga didn't work; write to me if
-	you know more.
-
-DOS: If you're using the freeware arcether.com, you might want to install
-        the driver patch from my web page.  It helps with PC/TCP, and also
-        can get arcether to load if it timed out too quickly during
-        initialization.  In fact, if you use it on a 386+ you REALLY need
-        the patch, really.
-	
-Windows:  See DOS :)  Trumpet Winsock works fine with either the Novell or
-	Arcether client, assuming you remember to load winpkt of course.
-
-LAN Manager and Windows for Workgroups: These programs use protocols that
-        are incompatible with the Internet standard.  They try to pretend
-        the cards are Ethernet, and confuse everyone else on the network. 
-        
-        However, v2.00 and higher of the Linux ARCnet driver supports this
-        protocol via the 'arc0e' device.  See the section on "Multiprotocol
-        Support" for more information.
-
-	Using the freeware Samba server and clients for Linux, you can now
-	interface quite nicely with TCP/IP-based WfWg or Lan Manager
-	networks.
-	
-Windows 95: Tools are included with Win95 that let you use either the LANMAN
-	style network drivers (NDIS) or Novell drivers (ODI) to handle your
-	ARCnet packets.  If you use ODI, you'll need to use the 'arc0'
-	device with Linux.  If you use NDIS, then try the 'arc0e' device. 
-	See the "Multiprotocol Support" section below if you need arc0e,
-	you're completely insane, and/or you need to build some kind of
-	hybrid network that uses both encapsulation types.
-
-OS/2: I've been told it works under Warp Connect with an ARCnet driver from
-	SMC.  You need to use the 'arc0e' interface for this.  If you get
-	the SMC driver to work with the TCP/IP stuff included in the
-	"normal" Warp Bonus Pack, let me know.
-
-	ftp.microsoft.com also has a freeware "Lan Manager for OS/2" client
-	which should use the same protocol as WfWg does.  I had no luck
-	installing it under Warp, however.  Please mail me with any results.
-
-NetBSD/AmiTCP: These use an old version of the Internet standard ARCnet
-	protocol (RFC1051) which is compatible with the Linux driver v2.10
-	ALPHA and above using the arc0s device. (See "Multiprotocol ARCnet"
-	below.)  ** Newer versions of NetBSD apparently support RFC1201.
-
-
-Using Multiprotocol ARCnet
---------------------------
-
-The ARCnet driver v2.10 ALPHA supports three protocols, each on its own
-"virtual network device":
-
-	arc0  - RFC1201 protocol, the official Internet standard which just
-		happens to be 100% compatible with Novell's TRXNET driver. 
-		Version 1.00 of the ARCnet driver supported _only_ this
-		protocol.  arc0 is the fastest of the three protocols (for
-		whatever reason), and allows larger packets to be used
-		because it supports RFC1201 "packet splitting" operations. 
-		Unless you have a specific need to use a different protocol,
-		I strongly suggest that you stick with this one.
-		
-	arc0e - "Ethernet-Encapsulation" which sends packets over ARCnet
-		that are actually a lot like Ethernet packets, including the
-		6-byte hardware addresses.  This protocol is compatible with
-		Microsoft's NDIS ARCnet driver, like the one in WfWg and
-		LANMAN.  Because the MTU of 493 is actually smaller than the
-		one "required" by TCP/IP (576), there is a chance that some
-		network operations will not function properly.  The Linux
-		TCP/IP layer can compensate in most cases, however, by
-		automatically fragmenting the TCP/IP packets to make them
-		fit.  arc0e also works slightly more slowly than arc0, for
-		reasons yet to be determined.  (Probably it's the smaller
-		MTU that does it.)
-		
-	arc0s - The "[s]imple" RFC1051 protocol is the "previous" Internet
-		standard that is completely incompatible with the new
-		standard.  Some software today, however, continues to
-		support the old standard (and only the old standard)
-		including NetBSD and AmiTCP.  RFC1051 also does not support
-		RFC1201's packet splitting, and the MTU of 507 is still
-		smaller than the Internet "requirement," so it's quite
-		possible that you may run into problems.  It's also slower
-		than RFC1201 by about 25%, for the same reason as arc0e.
-		
-		The arc0s support was contributed by Tomasz Motylewski
-		and modified somewhat by me.  Bugs are probably my fault.
-
-You can choose not to compile arc0e and arc0s into the driver if you want -
-this will save you a bit of memory and avoid confusion when eg. trying to
-use the "NFS-root" stuff in recent Linux kernels.
-
-The arc0e and arc0s devices are created automatically when you first
-ifconfig the arc0 device.  To actually use them, though, you need to also
-ifconfig the other virtual devices you need.  There are a number of ways you
-can set up your network then:
-
-
-1. Single Protocol.
-
-   This is the simplest way to configure your network: use just one of the
-   two available protocols.  As mentioned above, it's a good idea to use
-   only arc0 unless you have a good reason (like some other software, ie.
-   WfWg, that only works with arc0e).
-   
-   If you need only arc0, then the following commands should get you going:
-   	ifconfig arc0 MY.IP.ADD.RESS
-   	route add MY.IP.ADD.RESS arc0
-   	route add -net SUB.NET.ADD.RESS arc0
-   	[add other local routes here]
-   	
-   If you need arc0e (and only arc0e), it's a little different:
-   	ifconfig arc0 MY.IP.ADD.RESS
-   	ifconfig arc0e MY.IP.ADD.RESS
-   	route add MY.IP.ADD.RESS arc0e
-   	route add -net SUB.NET.ADD.RESS arc0e
-   
-   arc0s works much the same way as arc0e.
-
-
-2. More than one protocol on the same wire.
-
-   Now things start getting confusing.  To even try it, you may need to be
-   partly crazy.  Here's what *I* did. :) Note that I don't include arc0s in
-   my home network; I don't have any NetBSD or AmiTCP computers, so I only
-   use arc0s during limited testing.
-
-   I have three computers on my home network; two Linux boxes (which prefer
-   RFC1201 protocol, for reasons listed above), and one XT that can't run
-   Linux but runs the free Microsoft LANMAN Client instead.
-
-   Worse, one of the Linux computers (freedom) also has a modem and acts as
-   a router to my Internet provider.  The other Linux box (insight) also has
-   its own IP address and needs to use freedom as its default gateway.  The
-   XT (patience), however, does not have its own Internet IP address and so
-   I assigned it one on a "private subnet" (as defined by RFC1597).
-
-   To start with, take a simple network with just insight and freedom. 
-   Insight needs to:
-   	- talk to freedom via RFC1201 (arc0) protocol, because I like it
-	  more and it's faster.
-	- use freedom as its Internet gateway.
-	
-   That's pretty easy to do.  Set up insight like this:
-   	ifconfig arc0 insight
-   	route add insight arc0
-   	route add freedom arc0	/* I would use the subnet here (like I said
-					to to in "single protocol" above),
-   					but the rest of the subnet
-   					unfortunately lies across the PPP
-   					link on freedom, which confuses
-   					things. */
-   	route add default gw freedom
-   	
-   And freedom gets configured like so:
-   	ifconfig arc0 freedom
-   	route add freedom arc0
-   	route add insight arc0
-   	/* and default gateway is configured by pppd */
-   	
-   Great, now insight talks to freedom directly on arc0, and sends packets
-   to the Internet through freedom.  If you didn't know how to do the above,
-   you should probably stop reading this section now because it only gets
-   worse.
-
-   Now, how do I add patience into the network?  It will be using LANMAN
-   Client, which means I need the arc0e device.  It needs to be able to talk
-   to both insight and freedom, and also use freedom as a gateway to the
-   Internet.  (Recall that patience has a "private IP address" which won't
-   work on the Internet; that's okay, I configured Linux IP masquerading on
-   freedom for this subnet).
-   
-   So patience (necessarily; I don't have another IP number from my
-   provider) has an IP address on a different subnet than freedom and
-   insight, but needs to use freedom as an Internet gateway.  Worse, most
-   DOS networking programs, including LANMAN, have braindead networking
-   schemes that rely completely on the netmask and a 'default gateway' to
-   determine how to route packets.  This means that to get to freedom or
-   insight, patience WILL send through its default gateway, regardless of
-   the fact that both freedom and insight (courtesy of the arc0e device)
-   could understand a direct transmission.
-   
-   I compensate by giving freedom an extra IP address - aliased 'gatekeeper'
-   - that is on my private subnet, the same subnet that patience is on.  I
-   then define gatekeeper to be the default gateway for patience.
-   
-   To configure freedom (in addition to the commands above):
-   	ifconfig arc0e gatekeeper
-   	route add gatekeeper arc0e
-   	route add patience arc0e
-   
-   This way, freedom will send all packets for patience through arc0e,
-   giving its IP address as gatekeeper (on the private subnet).  When it
-   talks to insight or the Internet, it will use its "freedom" Internet IP
-   address.
-   
-   You will notice that we haven't configured the arc0e device on insight. 
-   This would work, but is not really necessary, and would require me to
-   assign insight another special IP number from my private subnet.  Since
-   both insight and patience are using freedom as their default gateway, the
-   two can already talk to each other.
-   
-   It's quite fortunate that I set things up like this the first time (cough
-   cough) because it's really handy when I boot insight into DOS.  There, it
-   runs the Novell ODI protocol stack, which only works with RFC1201 ARCnet. 
-   In this mode it would be impossible for insight to communicate directly
-   with patience, since the Novell stack is incompatible with Microsoft's
-   Ethernet-Encap.  Without changing any settings on freedom or patience, I
-   simply set freedom as the default gateway for insight (now in DOS,
-   remember) and all the forwarding happens "automagically" between the two
-   hosts that would normally not be able to communicate at all.
-   
-   For those who like diagrams, I have created two "virtual subnets" on the
-   same physical ARCnet wire.  You can picture it like this:
-   
-                                                    
-          [RFC1201 NETWORK]                   [ETHER-ENCAP NETWORK]
-      (registered Internet subnet)           (RFC1597 private subnet)
-  
-                             (IP Masquerade)
-          /---------------\         *            /---------------\
-          |               |         *            |               |
-          |               +-Freedom-*-Gatekeeper-+               |
-          |               |    |    *            |               |
-          \-------+-------/    |    *            \-------+-------/
-                  |            |                         |
-               Insight         |                      Patience
-                           (Internet)
-
-
-
-It works: what now?
--------------------
-
-Send mail describing your setup, preferably including driver version, kernel
-version, ARCnet card model, CPU type, number of systems on your network, and
-list of software in use to me at the following address:
-	apenwarr@worldvisions.ca
-
-I do send (sometimes automated) replies to all messages I receive.  My email
-can be weird (and also usually gets forwarded all over the place along the
-way to me), so if you don't get a reply within a reasonable time, please
-resend.
-
-
-It doesn't work: what now?
---------------------------
-
-Do the same as above, but also include the output of the ifconfig and route
-commands, as well as any pertinent log entries (ie. anything that starts
-with "arcnet:" and has shown up since the last reboot) in your mail.
-
-If you want to try fixing it yourself (I strongly recommend that you mail me
-about the problem first, since it might already have been solved) you may
-want to try some of the debug levels available.  For heavy testing on
-D_DURING or more, it would be a REALLY good idea to kill your klogd daemon
-first!  D_DURING displays 4-5 lines for each packet sent or received.  D_TX,
-D_RX, and D_SKB actually DISPLAY each packet as it is sent or received,
-which is obviously quite big.
-
-Starting with v2.40 ALPHA, the autoprobe routines have changed
-significantly.  In particular, they won't tell you why the card was not
-found unless you turn on the D_INIT_REASONS debugging flag.
-
-Once the driver is running, you can run the arcdump shell script (available
-from me or in the full ARCnet package, if you have it) as root to list the
-contents of the arcnet buffers at any time.  To make any sense at all out of
-this, you should grab the pertinent RFCs. (some are listed near the top of
-arcnet.c).  arcdump assumes your card is at 0xD0000.  If it isn't, edit the
-script.
-
-Buffers 0 and 1 are used for receiving, and Buffers 2 and 3 are for sending. 
-Ping-pong buffers are implemented both ways.
-
-If your debug level includes D_DURING and you did NOT define SLOW_XMIT_COPY,
-the buffers are cleared to a constant value of 0x42 every time the card is
-reset (which should only happen when you do an ifconfig up, or when Linux
-decides that the driver is broken).  During a transmit, unused parts of the
-buffer will be cleared to 0x42 as well.  This is to make it easier to figure
-out which bytes are being used by a packet.
-
-You can change the debug level without recompiling the kernel by typing:
-	ifconfig arc0 down metric 1xxx
-	/etc/rc.d/rc.inet1
-where "xxx" is the debug level you want.  For example, "metric 1015" would put
-you at debug level 15.  Debug level 7 is currently the default.
-
-Note that the debug level is (starting with v1.90 ALPHA) a binary
-combination of different debug flags; so debug level 7 is really 1+2+4 or
-D_NORMAL+D_EXTRA+D_INIT.  To include D_DURING, you would add 16 to this,
-resulting in debug level 23.
-
-If you don't understand that, you probably don't want to know anyway. 
-E-mail me about your problem.
-
-
-I want to send money: what now?
--------------------------------
-
-Go take a nap or something.  You'll feel better in the morning.
diff --git a/Documentation/networking/atm.rst b/Documentation/networking/atm.rst
new file mode 100644
index 000000000000..c1df8c038525
--- /dev/null
+++ b/Documentation/networking/atm.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===
+ATM
+===
+
+In order to use anything but the most primitive functions of ATM,
+several user-mode programs are required to assist the kernel. These
+programs and related material can be found via the ATM on Linux Web
+page at http://linux-atm.sourceforge.net/
+
+If you encounter problems with ATM, please report them on the ATM
+on Linux mailing list. Subscription information, archives, etc.,
+can be found on http://linux-atm.sourceforge.net/
diff --git a/Documentation/networking/atm.txt b/Documentation/networking/atm.txt
deleted file mode 100644
index 82921cee77fe..000000000000
--- a/Documentation/networking/atm.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-In order to use anything but the most primitive functions of ATM,
-several user-mode programs are required to assist the kernel. These
-programs and related material can be found via the ATM on Linux Web
-page at http://linux-atm.sourceforge.net/
-
-If you encounter problems with ATM, please report them on the ATM
-on Linux mailing list. Subscription information, archives, etc.,
-can be found on http://linux-atm.sourceforge.net/
diff --git a/Documentation/networking/ax25.rst b/Documentation/networking/ax25.rst
new file mode 100644
index 000000000000..824afd7002db
--- /dev/null
+++ b/Documentation/networking/ax25.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====
+AX.25
+=====
+
+To use the amateur radio protocols within Linux you will need to get a
+suitable copy of the AX.25 Utilities. More detailed information about
+AX.25, NET/ROM and ROSE, associated programs and and utilities can be
+found on http://www.linux-ax25.org.
+
+There is an active mailing list for discussing Linux amateur radio matters
+called linux-hams@vger.kernel.org. To subscribe to it, send a message to
+majordomo@vger.kernel.org with the words "subscribe linux-hams" in the body
+of the message, the subject field is ignored.  You don't need to be
+subscribed to post but of course that means you might miss an answer.
diff --git a/Documentation/networking/ax25.txt b/Documentation/networking/ax25.txt
deleted file mode 100644
index 8257dbf9be57..000000000000
--- a/Documentation/networking/ax25.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-To use the amateur radio protocols within Linux you will need to get a
-suitable copy of the AX.25 Utilities. More detailed information about
-AX.25, NET/ROM and ROSE, associated programs and and utilities can be
-found on http://www.linux-ax25.org.
-
-There is an active mailing list for discussing Linux amateur radio matters
-called linux-hams@vger.kernel.org. To subscribe to it, send a message to
-majordomo@vger.kernel.org with the words "subscribe linux-hams" in the body
-of the message, the subject field is ignored.  You don't need to be
-subscribed to post but of course that means you might miss an answer.
diff --git a/Documentation/networking/baycom.rst b/Documentation/networking/baycom.rst
new file mode 100644
index 000000000000..fe2d010f0e86
--- /dev/null
+++ b/Documentation/networking/baycom.rst
@@ -0,0 +1,174 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================
+Linux Drivers for Baycom Modems
+===============================
+
+Thomas M. Sailer, HB9JNX/AE4WA, <sailer@ife.ee.ethz.ch>
+
+The drivers for the baycom modems have been split into
+separate drivers as they did not share any code, and the driver
+and device names have changed.
+
+This document describes the Linux Kernel Drivers for simple Baycom style
+amateur radio modems.
+
+The following drivers are available:
+====================================
+
+baycom_ser_fdx:
+  This driver supports the SER12 modems either full or half duplex.
+  Its baud rate may be changed via the ``baud`` module parameter,
+  therefore it supports just about every bit bang modem on a
+  serial port. Its devices are called bcsf0 through bcsf3.
+  This is the recommended driver for SER12 type modems,
+  however if you have a broken UART clone that does not have working
+  delta status bits, you may try baycom_ser_hdx.
+
+baycom_ser_hdx:
+  This is an alternative driver for SER12 type modems.
+  It only supports half duplex, and only 1200 baud. Its devices
+  are called bcsh0 through bcsh3. Use this driver only if baycom_ser_fdx
+  does not work with your UART.
+
+baycom_par:
+  This driver supports the par96 and picpar modems.
+  Its devices are called bcp0 through bcp3.
+
+baycom_epp:
+  This driver supports the EPP modem.
+  Its devices are called bce0 through bce3.
+  This driver is work-in-progress.
+
+The following modems are supported:
+
+======= ========================================================================
+ser12   This is a very simple 1200 baud AFSK modem. The modem consists only
+	of a modulator/demodulator chip, usually a TI TCM3105. The computer
+	is responsible for regenerating the receiver bit clock, as well as
+	for handling the HDLC protocol. The modem connects to a serial port,
+	hence the name. Since the serial port is not used as an async serial
+	port, the kernel driver for serial ports cannot be used, and this
+	driver only supports standard serial hardware (8250, 16450, 16550)
+
+par96   This is a modem for 9600 baud FSK compatible to the G3RUH standard.
+	The modem does all the filtering and regenerates the receiver clock.
+	Data is transferred from and to the PC via a shift register.
+	The shift register is filled with 16 bits and an interrupt is signalled.
+	The PC then empties the shift register in a burst. This modem connects
+	to the parallel port, hence the name. The modem leaves the
+	implementation of the HDLC protocol and the scrambler polynomial to
+	the PC.
+
+picpar  This is a redesign of the par96 modem by Henning Rech, DF9IC. The modem
+	is protocol compatible to par96, but uses only three low power ICs
+	and can therefore be fed from the parallel port and does not require
+	an additional power supply. Furthermore, it incorporates a carrier
+	detect circuitry.
+
+EPP     This is a high-speed modem adaptor that connects to an enhanced parallel
+	port.
+
+	Its target audience is users working over a high speed hub (76.8kbit/s).
+
+eppfpga This is a redesign of the EPP adaptor.
+======= ========================================================================
+
+All of the above modems only support half duplex communications. However,
+the driver supports the KISS (see below) fullduplex command. It then simply
+starts to send as soon as there's a packet to transmit and does not care
+about DCD, i.e. it starts to send even if there's someone else on the channel.
+This command is required by some implementations of the DAMA channel
+access protocol.
+
+
+The Interface of the drivers
+============================
+
+Unlike previous drivers, these drivers are no longer character devices,
+but they are now true kernel network interfaces. Installation is therefore
+simple. Once installed, four interfaces named bc{sf,sh,p,e}[0-3] are available.
+sethdlc from the ax25 utilities may be used to set driver states etc.
+Users of userland AX.25 stacks may use the net2kiss utility (also available
+in the ax25 utilities package) to convert packets of a network interface
+to a KISS stream on a pseudo tty. There's also a patch available from
+me for WAMPES which allows attaching a kernel network interface directly.
+
+
+Configuring the driver
+======================
+
+Every time a driver is inserted into the kernel, it has to know which
+modems it should access at which ports. This can be done with the setbaycom
+utility. If you are only using one modem, you can also configure the
+driver from the insmod command line (or by means of an option line in
+``/etc/modprobe.d/*.conf``).
+
+Examples::
+
+  modprobe baycom_ser_fdx mode="ser12*" iobase=0x3f8 irq=4
+  sethdlc -i bcsf0 -p mode "ser12*" io 0x3f8 irq 4
+
+Both lines configure the first port to drive a ser12 modem at the first
+serial port (COM1 under DOS). The * in the mode parameter instructs the driver
+to use the software DCD algorithm (see below)::
+
+  insmod baycom_par mode="picpar" iobase=0x378
+  sethdlc -i bcp0 -p mode "picpar" io 0x378
+
+Both lines configure the first port to drive a picpar modem at the
+first parallel port (LPT1 under DOS). (Note: picpar implies
+hardware DCD, par96 implies software DCD).
+
+The channel access parameters can be set with sethdlc -a or kissparms.
+Note that both utilities interpret the values slightly differently.
+
+
+Hardware DCD versus Software DCD
+================================
+
+To avoid collisions on the air, the driver must know when the channel is
+busy. This is the task of the DCD circuitry/software. The driver may either
+utilise a software DCD algorithm (options=1) or use a DCD signal from
+the hardware (options=0).
+
+======= =================================================================
+ser12   if software DCD is utilised, the radio's squelch should always be
+	open. It is highly recommended to use the software DCD algorithm,
+	as it is much faster than most hardware squelch circuitry. The
+	disadvantage is a slightly higher load on the system.
+
+par96   the software DCD algorithm for this type of modem is rather poor.
+	The modem simply does not provide enough information to implement
+	a reasonable DCD algorithm in software. Therefore, if your radio
+	feeds the DCD input of the PAR96 modem, the use of the hardware
+	DCD circuitry is recommended.
+
+picpar  the picpar modem features a builtin DCD hardware, which is highly
+	recommended.
+======= =================================================================
+
+
+
+Compatibility with the rest of the Linux kernel
+===============================================
+
+The serial driver and the baycom serial drivers compete
+for the same hardware resources. Of course only one driver can access a given
+interface at a time. The serial driver grabs all interfaces it can find at
+startup time. Therefore the baycom drivers subsequently won't be able to
+access a serial port. You might therefore find it necessary to release
+a port owned by the serial driver with 'setserial /dev/ttyS# uart none', where
+# is the number of the interface. The baycom drivers do not reserve any
+ports at startup, unless one is specified on the 'insmod' command line. Another
+method to solve the problem is to compile all drivers as modules and
+leave it to kmod to load the correct driver depending on the application.
+
+The parallel port drivers (baycom_par, baycom_epp) now use the parport subsystem
+to arbitrate the ports between different client drivers.
+
+vy 73s de
+
+Tom Sailer, sailer@ife.ee.ethz.ch
+
+hb9jnx @ hb9w.ampr.org
diff --git a/Documentation/networking/baycom.txt b/Documentation/networking/baycom.txt
deleted file mode 100644
index 688f18fd4467..000000000000
--- a/Documentation/networking/baycom.txt
+++ /dev/null
@@ -1,158 +0,0 @@
-		    LINUX DRIVERS FOR BAYCOM MODEMS
-
-       Thomas M. Sailer, HB9JNX/AE4WA, <sailer@ife.ee.ethz.ch>
-
-!!NEW!! (04/98) The drivers for the baycom modems have been split into
-separate drivers as they did not share any code, and the driver
-and device names have changed.
-
-This document describes the Linux Kernel Drivers for simple Baycom style
-amateur radio modems. 
-
-The following drivers are available:
-
-baycom_ser_fdx:
-  This driver supports the SER12 modems either full or half duplex.
-  Its baud rate may be changed via the `baud' module parameter,
-  therefore it supports just about every bit bang modem on a
-  serial port. Its devices are called bcsf0 through bcsf3.
-  This is the recommended driver for SER12 type modems,
-  however if you have a broken UART clone that does not have working
-  delta status bits, you may try baycom_ser_hdx. 
-
-baycom_ser_hdx: 
-  This is an alternative driver for SER12 type modems.
-  It only supports half duplex, and only 1200 baud. Its devices
-  are called bcsh0 through bcsh3. Use this driver only if baycom_ser_fdx
-  does not work with your UART.
-
-baycom_par:
-  This driver supports the par96 and picpar modems.
-  Its devices are called bcp0 through bcp3.
-
-baycom_epp:
-  This driver supports the EPP modem.
-  Its devices are called bce0 through bce3.
-  This driver is work-in-progress.
-
-The following modems are supported:
-
-ser12:  This is a very simple 1200 baud AFSK modem. The modem consists only
-        of a modulator/demodulator chip, usually a TI TCM3105. The computer
-        is responsible for regenerating the receiver bit clock, as well as
-        for handling the HDLC protocol. The modem connects to a serial port,
-        hence the name. Since the serial port is not used as an async serial
-        port, the kernel driver for serial ports cannot be used, and this
-        driver only supports standard serial hardware (8250, 16450, 16550)
-
-par96:  This is a modem for 9600 baud FSK compatible to the G3RUH standard.
-        The modem does all the filtering and regenerates the receiver clock.
-        Data is transferred from and to the PC via a shift register.
-        The shift register is filled with 16 bits and an interrupt is signalled.
-        The PC then empties the shift register in a burst. This modem connects
-        to the parallel port, hence the name. The modem leaves the 
-        implementation of the HDLC protocol and the scrambler polynomial to
-        the PC.
-
-picpar: This is a redesign of the par96 modem by Henning Rech, DF9IC. The modem
-        is protocol compatible to par96, but uses only three low power ICs
-        and can therefore be fed from the parallel port and does not require
-        an additional power supply. Furthermore, it incorporates a carrier
-        detect circuitry.
-
-EPP:    This is a high-speed modem adaptor that connects to an enhanced parallel port.
-        Its target audience is users working over a high speed hub (76.8kbit/s).
-
-eppfpga: This is a redesign of the EPP adaptor.
-
-
-
-All of the above modems only support half duplex communications. However,
-the driver supports the KISS (see below) fullduplex command. It then simply
-starts to send as soon as there's a packet to transmit and does not care
-about DCD, i.e. it starts to send even if there's someone else on the channel.
-This command is required by some implementations of the DAMA channel 
-access protocol.
-
-
-The Interface of the drivers
-
-Unlike previous drivers, these drivers are no longer character devices,
-but they are now true kernel network interfaces. Installation is therefore
-simple. Once installed, four interfaces named bc{sf,sh,p,e}[0-3] are available.
-sethdlc from the ax25 utilities may be used to set driver states etc.
-Users of userland AX.25 stacks may use the net2kiss utility (also available
-in the ax25 utilities package) to convert packets of a network interface
-to a KISS stream on a pseudo tty. There's also a patch available from
-me for WAMPES which allows attaching a kernel network interface directly.
-
-
-Configuring the driver
-
-Every time a driver is inserted into the kernel, it has to know which
-modems it should access at which ports. This can be done with the setbaycom
-utility. If you are only using one modem, you can also configure the
-driver from the insmod command line (or by means of an option line in
-/etc/modprobe.d/*.conf).
-
-Examples:
-  modprobe baycom_ser_fdx mode="ser12*" iobase=0x3f8 irq=4
-  sethdlc -i bcsf0 -p mode "ser12*" io 0x3f8 irq 4
-
-Both lines configure the first port to drive a ser12 modem at the first
-serial port (COM1 under DOS). The * in the mode parameter instructs the driver to use
-the software DCD algorithm (see below).
-
-  insmod baycom_par mode="picpar" iobase=0x378
-  sethdlc -i bcp0 -p mode "picpar" io 0x378
-
-Both lines configure the first port to drive a picpar modem at the
-first parallel port (LPT1 under DOS). (Note: picpar implies
-hardware DCD, par96 implies software DCD).
-
-The channel access parameters can be set with sethdlc -a or kissparms.
-Note that both utilities interpret the values slightly differently.
-
-
-Hardware DCD versus Software DCD
-
-To avoid collisions on the air, the driver must know when the channel is
-busy. This is the task of the DCD circuitry/software. The driver may either
-utilise a software DCD algorithm (options=1) or use a DCD signal from
-the hardware (options=0).
-
-ser12:  if software DCD is utilised, the radio's squelch should always be
-        open. It is highly recommended to use the software DCD algorithm,
-        as it is much faster than most hardware squelch circuitry. The
-        disadvantage is a slightly higher load on the system.
-
-par96:  the software DCD algorithm for this type of modem is rather poor.
-        The modem simply does not provide enough information to implement
-        a reasonable DCD algorithm in software. Therefore, if your radio
-        feeds the DCD input of the PAR96 modem, the use of the hardware
-        DCD circuitry is recommended.
-
-picpar: the picpar modem features a builtin DCD hardware, which is highly
-        recommended.
-
-
-
-Compatibility with the rest of the Linux kernel
-
-The serial driver and the baycom serial drivers compete
-for the same hardware resources. Of course only one driver can access a given
-interface at a time. The serial driver grabs all interfaces it can find at
-startup time. Therefore the baycom drivers subsequently won't be able to
-access a serial port. You might therefore find it necessary to release
-a port owned by the serial driver with 'setserial /dev/ttyS# uart none', where
-# is the number of the interface. The baycom drivers do not reserve any
-ports at startup, unless one is specified on the 'insmod' command line. Another
-method to solve the problem is to compile all drivers as modules and
-leave it to kmod to load the correct driver depending on the application.
-
-The parallel port drivers (baycom_par, baycom_epp) now use the parport subsystem
-to arbitrate the ports between different client drivers.
-
-vy 73s de
-Tom Sailer, sailer@ife.ee.ethz.ch
-hb9jnx @ hb9w.ampr.org
diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst
new file mode 100644
index 000000000000..dd49f95d28d3
--- /dev/null
+++ b/Documentation/networking/bonding.rst
@@ -0,0 +1,2890 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+Linux Ethernet Bonding Driver HOWTO
+===================================
+
+Latest update: 27 April 2011
+
+Initial release: Thomas Davis <tadavis at lbl.gov>
+
+Corrections, HA extensions: 2000/10/03-15:
+
+  - Willy Tarreau <willy at meta-x.org>
+  - Constantine Gavrilov <const-g at xpert.com>
+  - Chad N. Tindel <ctindel at ieee dot org>
+  - Janice Girouard <girouard at us dot ibm dot com>
+  - Jay Vosburgh <fubar at us dot ibm dot com>
+
+Reorganized and updated Feb 2005 by Jay Vosburgh
+Added Sysfs information: 2006/04/24
+
+  - Mitch Williams <mitch.a.williams at intel.com>
+
+Introduction
+============
+
+The Linux bonding driver provides a method for aggregating
+multiple network interfaces into a single logical "bonded" interface.
+The behavior of the bonded interfaces depends upon the mode; generally
+speaking, modes provide either hot standby or load balancing services.
+Additionally, link integrity monitoring may be performed.
+
+The bonding driver originally came from Donald Becker's
+beowulf patches for kernel 2.0. It has changed quite a bit since, and
+the original tools from extreme-linux and beowulf sites will not work
+with this version of the driver.
+
+For new versions of the driver, updated userspace tools, and
+who to ask for help, please follow the links at the end of this file.
+
+.. Table of Contents
+
+   1. Bonding Driver Installation
+
+   2. Bonding Driver Options
+
+   3. Configuring Bonding Devices
+   3.1	Configuration with Sysconfig Support
+   3.1.1		Using DHCP with Sysconfig
+   3.1.2		Configuring Multiple Bonds with Sysconfig
+   3.2	Configuration with Initscripts Support
+   3.2.1		Using DHCP with Initscripts
+   3.2.2		Configuring Multiple Bonds with Initscripts
+   3.3	Configuring Bonding Manually with Ifenslave
+   3.3.1		Configuring Multiple Bonds Manually
+   3.4	Configuring Bonding Manually via Sysfs
+   3.5	Configuration with Interfaces Support
+   3.6	Overriding Configuration for Special Cases
+   3.7 Configuring LACP for 802.3ad mode in a more secure way
+
+   4. Querying Bonding Configuration
+   4.1	Bonding Configuration
+   4.2	Network Configuration
+
+   5. Switch Configuration
+
+   6. 802.1q VLAN Support
+
+   7. Link Monitoring
+   7.1	ARP Monitor Operation
+   7.2	Configuring Multiple ARP Targets
+   7.3	MII Monitor Operation
+
+   8. Potential Trouble Sources
+   8.1	Adventures in Routing
+   8.2	Ethernet Device Renaming
+   8.3	Painfully Slow Or No Failed Link Detection By Miimon
+
+   9. SNMP agents
+
+   10. Promiscuous mode
+
+   11. Configuring Bonding for High Availability
+   11.1	High Availability in a Single Switch Topology
+   11.2	High Availability in a Multiple Switch Topology
+   11.2.1		HA Bonding Mode Selection for Multiple Switch Topology
+   11.2.2		HA Link Monitoring for Multiple Switch Topology
+
+   12. Configuring Bonding for Maximum Throughput
+   12.1	Maximum Throughput in a Single Switch Topology
+   12.1.1		MT Bonding Mode Selection for Single Switch Topology
+   12.1.2		MT Link Monitoring for Single Switch Topology
+   12.2	Maximum Throughput in a Multiple Switch Topology
+   12.2.1		MT Bonding Mode Selection for Multiple Switch Topology
+   12.2.2		MT Link Monitoring for Multiple Switch Topology
+
+   13. Switch Behavior Issues
+   13.1	Link Establishment and Failover Delays
+   13.2	Duplicated Incoming Packets
+
+   14. Hardware Specific Considerations
+   14.1	IBM BladeCenter
+
+   15. Frequently Asked Questions
+
+   16. Resources and Links
+
+
+1. Bonding Driver Installation
+==============================
+
+Most popular distro kernels ship with the bonding driver
+already available as a module. If your distro does not, or you
+have need to compile bonding from source (e.g., configuring and
+installing a mainline kernel from kernel.org), you'll need to perform
+the following steps:
+
+1.1 Configure and build the kernel with bonding
+-----------------------------------------------
+
+The current version of the bonding driver is available in the
+drivers/net/bonding subdirectory of the most recent kernel source
+(which is available on http://kernel.org).  Most users "rolling their
+own" will want to use the most recent kernel from kernel.org.
+
+Configure kernel with "make menuconfig" (or "make xconfig" or
+"make config"), then select "Bonding driver support" in the "Network
+device support" section.  It is recommended that you configure the
+driver as module since it is currently the only way to pass parameters
+to the driver or configure more than one bonding device.
+
+Build and install the new kernel and modules.
+
+1.2 Bonding Control Utility
+---------------------------
+
+It is recommended to configure bonding via iproute2 (netlink)
+or sysfs, the old ifenslave control utility is obsolete.
+
+2. Bonding Driver Options
+=========================
+
+Options for the bonding driver are supplied as parameters to the
+bonding module at load time, or are specified via sysfs.
+
+Module options may be given as command line arguments to the
+insmod or modprobe command, but are usually specified in either the
+``/etc/modprobe.d/*.conf`` configuration files, or in a distro-specific
+configuration file (some of which are detailed in the next section).
+
+Details on bonding support for sysfs is provided in the
+"Configuring Bonding Manually via Sysfs" section, below.
+
+The available bonding driver parameters are listed below. If a
+parameter is not specified the default value is used.  When initially
+configuring a bond, it is recommended "tail -f /var/log/messages" be
+run in a separate window to watch for bonding driver error messages.
+
+It is critical that either the miimon or arp_interval and
+arp_ip_target parameters be specified, otherwise serious network
+degradation will occur during link failures.  Very few devices do not
+support at least miimon, so there is really no reason not to use it.
+
+Options with textual values will accept either the text name
+or, for backwards compatibility, the option value.  E.g.,
+"mode=802.3ad" and "mode=4" set the same mode.
+
+The parameters are as follows:
+
+active_slave
+
+	Specifies the new active slave for modes that support it
+	(active-backup, balance-alb and balance-tlb).  Possible values
+	are the name of any currently enslaved interface, or an empty
+	string.  If a name is given, the slave and its link must be up in order
+	to be selected as the new active slave.  If an empty string is
+	specified, the current active slave is cleared, and a new active
+	slave is selected automatically.
+
+	Note that this is only available through the sysfs interface. No module
+	parameter by this name exists.
+
+	The normal value of this option is the name of the currently
+	active slave, or the empty string if there is no active slave or
+	the current mode does not use an active slave.
+
+ad_actor_sys_prio
+
+	In an AD system, this specifies the system priority. The allowed range
+	is 1 - 65535. If the value is not specified, it takes 65535 as the
+	default value.
+
+	This parameter has effect only in 802.3ad mode and is available through
+	SysFs interface.
+
+ad_actor_system
+
+	In an AD system, this specifies the mac-address for the actor in
+	protocol packet exchanges (LACPDUs). The value cannot be NULL or
+	multicast. It is preferred to have the local-admin bit set for this
+	mac but driver does not enforce it. If the value is not given then
+	system defaults to using the masters' mac address as actors' system
+	address.
+
+	This parameter has effect only in 802.3ad mode and is available through
+	SysFs interface.
+
+ad_select
+
+	Specifies the 802.3ad aggregation selection logic to use.  The
+	possible values and their effects are:
+
+	stable or 0
+
+		The active aggregator is chosen by largest aggregate
+		bandwidth.
+
+		Reselection of the active aggregator occurs only when all
+		slaves of the active aggregator are down or the active
+		aggregator has no slaves.
+
+		This is the default value.
+
+	bandwidth or 1
+
+		The active aggregator is chosen by largest aggregate
+		bandwidth.  Reselection occurs if:
+
+		- A slave is added to or removed from the bond
+
+		- Any slave's link state changes
+
+		- Any slave's 802.3ad association state changes
+
+		- The bond's administrative state changes to up
+
+	count or 2
+
+		The active aggregator is chosen by the largest number of
+		ports (slaves).  Reselection occurs as described under the
+		"bandwidth" setting, above.
+
+	The bandwidth and count selection policies permit failover of
+	802.3ad aggregations when partial failure of the active aggregator
+	occurs.  This keeps the aggregator with the highest availability
+	(either in bandwidth or in number of ports) active at all times.
+
+	This option was added in bonding version 3.4.0.
+
+ad_user_port_key
+
+	In an AD system, the port-key has three parts as shown below -
+
+	   =====  ============
+	   Bits   Use
+	   =====  ============
+	   00     Duplex
+	   01-05  Speed
+	   06-15  User-defined
+	   =====  ============
+
+	This defines the upper 10 bits of the port key. The values can be
+	from 0 - 1023. If not given, the system defaults to 0.
+
+	This parameter has effect only in 802.3ad mode and is available through
+	SysFs interface.
+
+all_slaves_active
+
+	Specifies that duplicate frames (received on inactive ports) should be
+	dropped (0) or delivered (1).
+
+	Normally, bonding will drop duplicate frames (received on inactive
+	ports), which is desirable for most users. But there are some times
+	it is nice to allow duplicate frames to be delivered.
+
+	The default value is 0 (drop duplicate frames received on inactive
+	ports).
+
+arp_interval
+
+	Specifies the ARP link monitoring frequency in milliseconds.
+
+	The ARP monitor works by periodically checking the slave
+	devices to determine whether they have sent or received
+	traffic recently (the precise criteria depends upon the
+	bonding mode, and the state of the slave).  Regular traffic is
+	generated via ARP probes issued for the addresses specified by
+	the arp_ip_target option.
+
+	This behavior can be modified by the arp_validate option,
+	below.
+
+	If ARP monitoring is used in an etherchannel compatible mode
+	(modes 0 and 2), the switch should be configured in a mode
+	that evenly distributes packets across all links. If the
+	switch is configured to distribute the packets in an XOR
+	fashion, all replies from the ARP targets will be received on
+	the same link which could cause the other team members to
+	fail.  ARP monitoring should not be used in conjunction with
+	miimon.  A value of 0 disables ARP monitoring.  The default
+	value is 0.
+
+arp_ip_target
+
+	Specifies the IP addresses to use as ARP monitoring peers when
+	arp_interval is > 0.  These are the targets of the ARP request
+	sent to determine the health of the link to the targets.
+	Specify these values in ddd.ddd.ddd.ddd format.  Multiple IP
+	addresses must be separated by a comma.  At least one IP
+	address must be given for ARP monitoring to function.  The
+	maximum number of targets that can be specified is 16.  The
+	default value is no IP addresses.
+
+arp_validate
+
+	Specifies whether or not ARP probes and replies should be
+	validated in any mode that supports arp monitoring, or whether
+	non-ARP traffic should be filtered (disregarded) for link
+	monitoring purposes.
+
+	Possible values are:
+
+	none or 0
+
+		No validation or filtering is performed.
+
+	active or 1
+
+		Validation is performed only for the active slave.
+
+	backup or 2
+
+		Validation is performed only for backup slaves.
+
+	all or 3
+
+		Validation is performed for all slaves.
+
+	filter or 4
+
+		Filtering is applied to all slaves. No validation is
+		performed.
+
+	filter_active or 5
+
+		Filtering is applied to all slaves, validation is performed
+		only for the active slave.
+
+	filter_backup or 6
+
+		Filtering is applied to all slaves, validation is performed
+		only for backup slaves.
+
+	Validation:
+
+	Enabling validation causes the ARP monitor to examine the incoming
+	ARP requests and replies, and only consider a slave to be up if it
+	is receiving the appropriate ARP traffic.
+
+	For an active slave, the validation checks ARP replies to confirm
+	that they were generated by an arp_ip_target.  Since backup slaves
+	do not typically receive these replies, the validation performed
+	for backup slaves is on the broadcast ARP request sent out via the
+	active slave.  It is possible that some switch or network
+	configurations may result in situations wherein the backup slaves
+	do not receive the ARP requests; in such a situation, validation
+	of backup slaves must be disabled.
+
+	The validation of ARP requests on backup slaves is mainly helping
+	bonding to decide which slaves are more likely to work in case of
+	the active slave failure, it doesn't really guarantee that the
+	backup slave will work if it's selected as the next active slave.
+
+	Validation is useful in network configurations in which multiple
+	bonding hosts are concurrently issuing ARPs to one or more targets
+	beyond a common switch.  Should the link between the switch and
+	target fail (but not the switch itself), the probe traffic
+	generated by the multiple bonding instances will fool the standard
+	ARP monitor into considering the links as still up.  Use of
+	validation can resolve this, as the ARP monitor will only consider
+	ARP requests and replies associated with its own instance of
+	bonding.
+
+	Filtering:
+
+	Enabling filtering causes the ARP monitor to only use incoming ARP
+	packets for link availability purposes.  Arriving packets that are
+	not ARPs are delivered normally, but do not count when determining
+	if a slave is available.
+
+	Filtering operates by only considering the reception of ARP
+	packets (any ARP packet, regardless of source or destination) when
+	determining if a slave has received traffic for link availability
+	purposes.
+
+	Filtering is useful in network configurations in which significant
+	levels of third party broadcast traffic would fool the standard
+	ARP monitor into considering the links as still up.  Use of
+	filtering can resolve this, as only ARP traffic is considered for
+	link availability purposes.
+
+	This option was added in bonding version 3.1.0.
+
+arp_all_targets
+
+	Specifies the quantity of arp_ip_targets that must be reachable
+	in order for the ARP monitor to consider a slave as being up.
+	This option affects only active-backup mode for slaves with
+	arp_validation enabled.
+
+	Possible values are:
+
+	any or 0
+
+		consider the slave up only when any of the arp_ip_targets
+		is reachable
+
+	all or 1
+
+		consider the slave up only when all of the arp_ip_targets
+		are reachable
+
+downdelay
+
+	Specifies the time, in milliseconds, to wait before disabling
+	a slave after a link failure has been detected.  This option
+	is only valid for the miimon link monitor.  The downdelay
+	value should be a multiple of the miimon value; if not, it
+	will be rounded down to the nearest multiple.  The default
+	value is 0.
+
+fail_over_mac
+
+	Specifies whether active-backup mode should set all slaves to
+	the same MAC address at enslavement (the traditional
+	behavior), or, when enabled, perform special handling of the
+	bond's MAC address in accordance with the selected policy.
+
+	Possible values are:
+
+	none or 0
+
+		This setting disables fail_over_mac, and causes
+		bonding to set all slaves of an active-backup bond to
+		the same MAC address at enslavement time.  This is the
+		default.
+
+	active or 1
+
+		The "active" fail_over_mac policy indicates that the
+		MAC address of the bond should always be the MAC
+		address of the currently active slave.  The MAC
+		address of the slaves is not changed; instead, the MAC
+		address of the bond changes during a failover.
+
+		This policy is useful for devices that cannot ever
+		alter their MAC address, or for devices that refuse
+		incoming broadcasts with their own source MAC (which
+		interferes with the ARP monitor).
+
+		The down side of this policy is that every device on
+		the network must be updated via gratuitous ARP,
+		vs. just updating a switch or set of switches (which
+		often takes place for any traffic, not just ARP
+		traffic, if the switch snoops incoming traffic to
+		update its tables) for the traditional method.  If the
+		gratuitous ARP is lost, communication may be
+		disrupted.
+
+		When this policy is used in conjunction with the mii
+		monitor, devices which assert link up prior to being
+		able to actually transmit and receive are particularly
+		susceptible to loss of the gratuitous ARP, and an
+		appropriate updelay setting may be required.
+
+	follow or 2
+
+		The "follow" fail_over_mac policy causes the MAC
+		address of the bond to be selected normally (normally
+		the MAC address of the first slave added to the bond).
+		However, the second and subsequent slaves are not set
+		to this MAC address while they are in a backup role; a
+		slave is programmed with the bond's MAC address at
+		failover time (and the formerly active slave receives
+		the newly active slave's MAC address).
+
+		This policy is useful for multiport devices that
+		either become confused or incur a performance penalty
+		when multiple ports are programmed with the same MAC
+		address.
+
+
+	The default policy is none, unless the first slave cannot
+	change its MAC address, in which case the active policy is
+	selected by default.
+
+	This option may be modified via sysfs only when no slaves are
+	present in the bond.
+
+	This option was added in bonding version 3.2.0.  The "follow"
+	policy was added in bonding version 3.3.0.
+
+lacp_rate
+
+	Option specifying the rate in which we'll ask our link partner
+	to transmit LACPDU packets in 802.3ad mode.  Possible values
+	are:
+
+	slow or 0
+		Request partner to transmit LACPDUs every 30 seconds
+
+	fast or 1
+		Request partner to transmit LACPDUs every 1 second
+
+	The default is slow.
+
+max_bonds
+
+	Specifies the number of bonding devices to create for this
+	instance of the bonding driver.  E.g., if max_bonds is 3, and
+	the bonding driver is not already loaded, then bond0, bond1
+	and bond2 will be created.  The default value is 1.  Specifying
+	a value of 0 will load bonding, but will not create any devices.
+
+miimon
+
+	Specifies the MII link monitoring frequency in milliseconds.
+	This determines how often the link state of each slave is
+	inspected for link failures.  A value of zero disables MII
+	link monitoring.  A value of 100 is a good starting point.
+	The use_carrier option, below, affects how the link state is
+	determined.  See the High Availability section for additional
+	information.  The default value is 0.
+
+min_links
+
+	Specifies the minimum number of links that must be active before
+	asserting carrier. It is similar to the Cisco EtherChannel min-links
+	feature. This allows setting the minimum number of member ports that
+	must be up (link-up state) before marking the bond device as up
+	(carrier on). This is useful for situations where higher level services
+	such as clustering want to ensure a minimum number of low bandwidth
+	links are active before switchover. This option only affect 802.3ad
+	mode.
+
+	The default value is 0. This will cause carrier to be asserted (for
+	802.3ad mode) whenever there is an active aggregator, regardless of the
+	number of available links in that aggregator. Note that, because an
+	aggregator cannot be active without at least one available link,
+	setting this option to 0 or to 1 has the exact same effect.
+
+mode
+
+	Specifies one of the bonding policies. The default is
+	balance-rr (round robin).  Possible values are:
+
+	balance-rr or 0
+
+		Round-robin policy: Transmit packets in sequential
+		order from the first available slave through the
+		last.  This mode provides load balancing and fault
+		tolerance.
+
+	active-backup or 1
+
+		Active-backup policy: Only one slave in the bond is
+		active.  A different slave becomes active if, and only
+		if, the active slave fails.  The bond's MAC address is
+		externally visible on only one port (network adapter)
+		to avoid confusing the switch.
+
+		In bonding version 2.6.2 or later, when a failover
+		occurs in active-backup mode, bonding will issue one
+		or more gratuitous ARPs on the newly active slave.
+		One gratuitous ARP is issued for the bonding master
+		interface and each VLAN interfaces configured above
+		it, provided that the interface has at least one IP
+		address configured.  Gratuitous ARPs issued for VLAN
+		interfaces are tagged with the appropriate VLAN id.
+
+		This mode provides fault tolerance.  The primary
+		option, documented below, affects the behavior of this
+		mode.
+
+	balance-xor or 2
+
+		XOR policy: Transmit based on the selected transmit
+		hash policy.  The default policy is a simple [(source
+		MAC address XOR'd with destination MAC address XOR
+		packet type ID) modulo slave count].  Alternate transmit
+		policies may be	selected via the xmit_hash_policy option,
+		described below.
+
+		This mode provides load balancing and fault tolerance.
+
+	broadcast or 3
+
+		Broadcast policy: transmits everything on all slave
+		interfaces.  This mode provides fault tolerance.
+
+	802.3ad or 4
+
+		IEEE 802.3ad Dynamic link aggregation.  Creates
+		aggregation groups that share the same speed and
+		duplex settings.  Utilizes all slaves in the active
+		aggregator according to the 802.3ad specification.
+
+		Slave selection for outgoing traffic is done according
+		to the transmit hash policy, which may be changed from
+		the default simple XOR policy via the xmit_hash_policy
+		option, documented below.  Note that not all transmit
+		policies may be 802.3ad compliant, particularly in
+		regards to the packet mis-ordering requirements of
+		section 43.2.4 of the 802.3ad standard.  Differing
+		peer implementations will have varying tolerances for
+		noncompliance.
+
+		Prerequisites:
+
+		1. Ethtool support in the base drivers for retrieving
+		the speed and duplex of each slave.
+
+		2. A switch that supports IEEE 802.3ad Dynamic link
+		aggregation.
+
+		Most switches will require some type of configuration
+		to enable 802.3ad mode.
+
+	balance-tlb or 5
+
+		Adaptive transmit load balancing: channel bonding that
+		does not require any special switch support.
+
+		In tlb_dynamic_lb=1 mode; the outgoing traffic is
+		distributed according to the current load (computed
+		relative to the speed) on each slave.
+
+		In tlb_dynamic_lb=0 mode; the load balancing based on
+		current load is disabled and the load is distributed
+		only using the hash distribution.
+
+		Incoming traffic is received by the current slave.
+		If the receiving slave fails, another slave takes over
+		the MAC address of the failed receiving slave.
+
+		Prerequisite:
+
+		Ethtool support in the base drivers for retrieving the
+		speed of each slave.
+
+	balance-alb or 6
+
+		Adaptive load balancing: includes balance-tlb plus
+		receive load balancing (rlb) for IPV4 traffic, and
+		does not require any special switch support.  The
+		receive load balancing is achieved by ARP negotiation.
+		The bonding driver intercepts the ARP Replies sent by
+		the local system on their way out and overwrites the
+		source hardware address with the unique hardware
+		address of one of the slaves in the bond such that
+		different peers use different hardware addresses for
+		the server.
+
+		Receive traffic from connections created by the server
+		is also balanced.  When the local system sends an ARP
+		Request the bonding driver copies and saves the peer's
+		IP information from the ARP packet.  When the ARP
+		Reply arrives from the peer, its hardware address is
+		retrieved and the bonding driver initiates an ARP
+		reply to this peer assigning it to one of the slaves
+		in the bond.  A problematic outcome of using ARP
+		negotiation for balancing is that each time that an
+		ARP request is broadcast it uses the hardware address
+		of the bond.  Hence, peers learn the hardware address
+		of the bond and the balancing of receive traffic
+		collapses to the current slave.  This is handled by
+		sending updates (ARP Replies) to all the peers with
+		their individually assigned hardware address such that
+		the traffic is redistributed.  Receive traffic is also
+		redistributed when a new slave is added to the bond
+		and when an inactive slave is re-activated.  The
+		receive load is distributed sequentially (round robin)
+		among the group of highest speed slaves in the bond.
+
+		When a link is reconnected or a new slave joins the
+		bond the receive traffic is redistributed among all
+		active slaves in the bond by initiating ARP Replies
+		with the selected MAC address to each of the
+		clients. The updelay parameter (detailed below) must
+		be set to a value equal or greater than the switch's
+		forwarding delay so that the ARP Replies sent to the
+		peers will not be blocked by the switch.
+
+		Prerequisites:
+
+		1. Ethtool support in the base drivers for retrieving
+		the speed of each slave.
+
+		2. Base driver support for setting the hardware
+		address of a device while it is open.  This is
+		required so that there will always be one slave in the
+		team using the bond hardware address (the
+		curr_active_slave) while having a unique hardware
+		address for each slave in the bond.  If the
+		curr_active_slave fails its hardware address is
+		swapped with the new curr_active_slave that was
+		chosen.
+
+num_grat_arp,
+num_unsol_na
+
+	Specify the number of peer notifications (gratuitous ARPs and
+	unsolicited IPv6 Neighbor Advertisements) to be issued after a
+	failover event.  As soon as the link is up on the new slave
+	(possibly immediately) a peer notification is sent on the
+	bonding device and each VLAN sub-device. This is repeated at
+	the rate specified by peer_notif_delay if the number is
+	greater than 1.
+
+	The valid range is 0 - 255; the default value is 1.  These options
+	affect only the active-backup mode.  These options were added for
+	bonding versions 3.3.0 and 3.4.0 respectively.
+
+	From Linux 3.0 and bonding version 3.7.1, these notifications
+	are generated by the ipv4 and ipv6 code and the numbers of
+	repetitions cannot be set independently.
+
+packets_per_slave
+
+	Specify the number of packets to transmit through a slave before
+	moving to the next one. When set to 0 then a slave is chosen at
+	random.
+
+	The valid range is 0 - 65535; the default value is 1. This option
+	has effect only in balance-rr mode.
+
+peer_notif_delay
+
+	Specify the delay, in milliseconds, between each peer
+	notification (gratuitous ARP and unsolicited IPv6 Neighbor
+	Advertisement) when they are issued after a failover event.
+	This delay should be a multiple of the link monitor interval
+	(arp_interval or miimon, whichever is active). The default
+	value is 0 which means to match the value of the link monitor
+	interval.
+
+primary
+
+	A string (eth0, eth2, etc) specifying which slave is the
+	primary device.  The specified device will always be the
+	active slave while it is available.  Only when the primary is
+	off-line will alternate devices be used.  This is useful when
+	one slave is preferred over another, e.g., when one slave has
+	higher throughput than another.
+
+	The primary option is only valid for active-backup(1),
+	balance-tlb (5) and balance-alb (6) mode.
+
+primary_reselect
+
+	Specifies the reselection policy for the primary slave.  This
+	affects how the primary slave is chosen to become the active slave
+	when failure of the active slave or recovery of the primary slave
+	occurs.  This option is designed to prevent flip-flopping between
+	the primary slave and other slaves.  Possible values are:
+
+	always or 0 (default)
+
+		The primary slave becomes the active slave whenever it
+		comes back up.
+
+	better or 1
+
+		The primary slave becomes the active slave when it comes
+		back up, if the speed and duplex of the primary slave is
+		better than the speed and duplex of the current active
+		slave.
+
+	failure or 2
+
+		The primary slave becomes the active slave only if the
+		current active slave fails and the primary slave is up.
+
+	The primary_reselect setting is ignored in two cases:
+
+		If no slaves are active, the first slave to recover is
+		made the active slave.
+
+		When initially enslaved, the primary slave is always made
+		the active slave.
+
+	Changing the primary_reselect policy via sysfs will cause an
+	immediate selection of the best active slave according to the new
+	policy.  This may or may not result in a change of the active
+	slave, depending upon the circumstances.
+
+	This option was added for bonding version 3.6.0.
+
+tlb_dynamic_lb
+
+	Specifies if dynamic shuffling of flows is enabled in tlb
+	mode. The value has no effect on any other modes.
+
+	The default behavior of tlb mode is to shuffle active flows across
+	slaves based on the load in that interval. This gives nice lb
+	characteristics but can cause packet reordering. If re-ordering is
+	a concern use this variable to disable flow shuffling and rely on
+	load balancing provided solely by the hash distribution.
+	xmit-hash-policy can be used to select the appropriate hashing for
+	the setup.
+
+	The sysfs entry can be used to change the setting per bond device
+	and the initial value is derived from the module parameter. The
+	sysfs entry is allowed to be changed only if the bond device is
+	down.
+
+	The default value is "1" that enables flow shuffling while value "0"
+	disables it. This option was added in bonding driver 3.7.1
+
+
+updelay
+
+	Specifies the time, in milliseconds, to wait before enabling a
+	slave after a link recovery has been detected.  This option is
+	only valid for the miimon link monitor.  The updelay value
+	should be a multiple of the miimon value; if not, it will be
+	rounded down to the nearest multiple.  The default value is 0.
+
+use_carrier
+
+	Specifies whether or not miimon should use MII or ETHTOOL
+	ioctls vs. netif_carrier_ok() to determine the link
+	status. The MII or ETHTOOL ioctls are less efficient and
+	utilize a deprecated calling sequence within the kernel.  The
+	netif_carrier_ok() relies on the device driver to maintain its
+	state with netif_carrier_on/off; at this writing, most, but
+	not all, device drivers support this facility.
+
+	If bonding insists that the link is up when it should not be,
+	it may be that your network device driver does not support
+	netif_carrier_on/off.  The default state for netif_carrier is
+	"carrier on," so if a driver does not support netif_carrier,
+	it will appear as if the link is always up.  In this case,
+	setting use_carrier to 0 will cause bonding to revert to the
+	MII / ETHTOOL ioctl method to determine the link state.
+
+	A value of 1 enables the use of netif_carrier_ok(), a value of
+	0 will use the deprecated MII / ETHTOOL ioctls.  The default
+	value is 1.
+
+xmit_hash_policy
+
+	Selects the transmit hash policy to use for slave selection in
+	balance-xor, 802.3ad, and tlb modes.  Possible values are:
+
+	layer2
+
+		Uses XOR of hardware MAC addresses and packet type ID
+		field to generate the hash. The formula is
+
+		hash = source MAC XOR destination MAC XOR packet type ID
+		slave number = hash modulo slave count
+
+		This algorithm will place all traffic to a particular
+		network peer on the same slave.
+
+		This algorithm is 802.3ad compliant.
+
+	layer2+3
+
+		This policy uses a combination of layer2 and layer3
+		protocol information to generate the hash.
+
+		Uses XOR of hardware MAC addresses and IP addresses to
+		generate the hash.  The formula is
+
+		hash = source MAC XOR destination MAC XOR packet type ID
+		hash = hash XOR source IP XOR destination IP
+		hash = hash XOR (hash RSHIFT 16)
+		hash = hash XOR (hash RSHIFT 8)
+		And then hash is reduced modulo slave count.
+
+		If the protocol is IPv6 then the source and destination
+		addresses are first hashed using ipv6_addr_hash.
+
+		This algorithm will place all traffic to a particular
+		network peer on the same slave.  For non-IP traffic,
+		the formula is the same as for the layer2 transmit
+		hash policy.
+
+		This policy is intended to provide a more balanced
+		distribution of traffic than layer2 alone, especially
+		in environments where a layer3 gateway device is
+		required to reach most destinations.
+
+		This algorithm is 802.3ad compliant.
+
+	layer3+4
+
+		This policy uses upper layer protocol information,
+		when available, to generate the hash.  This allows for
+		traffic to a particular network peer to span multiple
+		slaves, although a single connection will not span
+		multiple slaves.
+
+		The formula for unfragmented TCP and UDP packets is
+
+		hash = source port, destination port (as in the header)
+		hash = hash XOR source IP XOR destination IP
+		hash = hash XOR (hash RSHIFT 16)
+		hash = hash XOR (hash RSHIFT 8)
+		And then hash is reduced modulo slave count.
+
+		If the protocol is IPv6 then the source and destination
+		addresses are first hashed using ipv6_addr_hash.
+
+		For fragmented TCP or UDP packets and all other IPv4 and
+		IPv6 protocol traffic, the source and destination port
+		information is omitted.  For non-IP traffic, the
+		formula is the same as for the layer2 transmit hash
+		policy.
+
+		This algorithm is not fully 802.3ad compliant.  A
+		single TCP or UDP conversation containing both
+		fragmented and unfragmented packets will see packets
+		striped across two interfaces.  This may result in out
+		of order delivery.  Most traffic types will not meet
+		this criteria, as TCP rarely fragments traffic, and
+		most UDP traffic is not involved in extended
+		conversations.  Other implementations of 802.3ad may
+		or may not tolerate this noncompliance.
+
+	encap2+3
+
+		This policy uses the same formula as layer2+3 but it
+		relies on skb_flow_dissect to obtain the header fields
+		which might result in the use of inner headers if an
+		encapsulation protocol is used. For example this will
+		improve the performance for tunnel users because the
+		packets will be distributed according to the encapsulated
+		flows.
+
+	encap3+4
+
+		This policy uses the same formula as layer3+4 but it
+		relies on skb_flow_dissect to obtain the header fields
+		which might result in the use of inner headers if an
+		encapsulation protocol is used. For example this will
+		improve the performance for tunnel users because the
+		packets will be distributed according to the encapsulated
+		flows.
+
+	The default value is layer2.  This option was added in bonding
+	version 2.6.3.  In earlier versions of bonding, this parameter
+	does not exist, and the layer2 policy is the only policy.  The
+	layer2+3 value was added for bonding version 3.2.2.
+
+resend_igmp
+
+	Specifies the number of IGMP membership reports to be issued after
+	a failover event. One membership report is issued immediately after
+	the failover, subsequent packets are sent in each 200ms interval.
+
+	The valid range is 0 - 255; the default value is 1. A value of 0
+	prevents the IGMP membership report from being issued in response
+	to the failover event.
+
+	This option is useful for bonding modes balance-rr (0), active-backup
+	(1), balance-tlb (5) and balance-alb (6), in which a failover can
+	switch the IGMP traffic from one slave to another.  Therefore a fresh
+	IGMP report must be issued to cause the switch to forward the incoming
+	IGMP traffic over the newly selected slave.
+
+	This option was added for bonding version 3.7.0.
+
+lp_interval
+
+	Specifies the number of seconds between instances where the bonding
+	driver sends learning packets to each slaves peer switch.
+
+	The valid range is 1 - 0x7fffffff; the default value is 1. This Option
+	has effect only in balance-tlb and balance-alb modes.
+
+3. Configuring Bonding Devices
+==============================
+
+You can configure bonding using either your distro's network
+initialization scripts, or manually using either iproute2 or the
+sysfs interface.  Distros generally use one of three packages for the
+network initialization scripts: initscripts, sysconfig or interfaces.
+Recent versions of these packages have support for bonding, while older
+versions do not.
+
+We will first describe the options for configuring bonding for
+distros using versions of initscripts, sysconfig and interfaces with full
+or partial support for bonding, then provide information on enabling
+bonding without support from the network initialization scripts (i.e.,
+older versions of initscripts or sysconfig).
+
+If you're unsure whether your distro uses sysconfig,
+initscripts or interfaces, or don't know if it's new enough, have no fear.
+Determining this is fairly straightforward.
+
+First, look for a file called interfaces in /etc/network directory.
+If this file is present in your system, then your system use interfaces. See
+Configuration with Interfaces Support.
+
+Else, issue the command::
+
+	$ rpm -qf /sbin/ifup
+
+It will respond with a line of text starting with either
+"initscripts" or "sysconfig," followed by some numbers.  This is the
+package that provides your network initialization scripts.
+
+Next, to determine if your installation supports bonding,
+issue the command::
+
+    $ grep ifenslave /sbin/ifup
+
+If this returns any matches, then your initscripts or
+sysconfig has support for bonding.
+
+3.1 Configuration with Sysconfig Support
+----------------------------------------
+
+This section applies to distros using a version of sysconfig
+with bonding support, for example, SuSE Linux Enterprise Server 9.
+
+SuSE SLES 9's networking configuration system does support
+bonding, however, at this writing, the YaST system configuration
+front end does not provide any means to work with bonding devices.
+Bonding devices can be managed by hand, however, as follows.
+
+First, if they have not already been configured, configure the
+slave devices.  On SLES 9, this is most easily done by running the
+yast2 sysconfig configuration utility.  The goal is for to create an
+ifcfg-id file for each slave device.  The simplest way to accomplish
+this is to configure the devices for DHCP (this is only to get the
+file ifcfg-id file created; see below for some issues with DHCP).  The
+name of the configuration file for each device will be of the form::
+
+    ifcfg-id-xx:xx:xx:xx:xx:xx
+
+Where the "xx" portion will be replaced with the digits from
+the device's permanent MAC address.
+
+Once the set of ifcfg-id-xx:xx:xx:xx:xx:xx files has been
+created, it is necessary to edit the configuration files for the slave
+devices (the MAC addresses correspond to those of the slave devices).
+Before editing, the file will contain multiple lines, and will look
+something like this::
+
+	BOOTPROTO='dhcp'
+	STARTMODE='on'
+	USERCTL='no'
+	UNIQUE='XNzu.WeZGOGF+4wE'
+	_nm_name='bus-pci-0001:61:01.0'
+
+Change the BOOTPROTO and STARTMODE lines to the following::
+
+	BOOTPROTO='none'
+	STARTMODE='off'
+
+Do not alter the UNIQUE or _nm_name lines.  Remove any other
+lines (USERCTL, etc).
+
+Once the ifcfg-id-xx:xx:xx:xx:xx:xx files have been modified,
+it's time to create the configuration file for the bonding device
+itself.  This file is named ifcfg-bondX, where X is the number of the
+bonding device to create, starting at 0.  The first such file is
+ifcfg-bond0, the second is ifcfg-bond1, and so on.  The sysconfig
+network configuration system will correctly start multiple instances
+of bonding.
+
+The contents of the ifcfg-bondX file is as follows::
+
+	BOOTPROTO="static"
+	BROADCAST="10.0.2.255"
+	IPADDR="10.0.2.10"
+	NETMASK="255.255.0.0"
+	NETWORK="10.0.2.0"
+	REMOTE_IPADDR=""
+	STARTMODE="onboot"
+	BONDING_MASTER="yes"
+	BONDING_MODULE_OPTS="mode=active-backup miimon=100"
+	BONDING_SLAVE0="eth0"
+	BONDING_SLAVE1="bus-pci-0000:06:08.1"
+
+Replace the sample BROADCAST, IPADDR, NETMASK and NETWORK
+values with the appropriate values for your network.
+
+The STARTMODE specifies when the device is brought online.
+The possible values are:
+
+	======== ======================================================
+	onboot	 The device is started at boot time.  If you're not
+		 sure, this is probably what you want.
+
+	manual	 The device is started only when ifup is called
+		 manually.  Bonding devices may be configured this
+		 way if you do not wish them to start automatically
+		 at boot for some reason.
+
+	hotplug  The device is started by a hotplug event.  This is not
+		 a valid choice for a bonding device.
+
+	off or   The device configuration is ignored.
+	ignore
+	======== ======================================================
+
+The line BONDING_MASTER='yes' indicates that the device is a
+bonding master device.  The only useful value is "yes."
+
+The contents of BONDING_MODULE_OPTS are supplied to the
+instance of the bonding module for this device.  Specify the options
+for the bonding mode, link monitoring, and so on here.  Do not include
+the max_bonds bonding parameter; this will confuse the configuration
+system if you have multiple bonding devices.
+
+Finally, supply one BONDING_SLAVEn="slave device" for each
+slave.  where "n" is an increasing value, one for each slave.  The
+"slave device" is either an interface name, e.g., "eth0", or a device
+specifier for the network device.  The interface name is easier to
+find, but the ethN names are subject to change at boot time if, e.g.,
+a device early in the sequence has failed.  The device specifiers
+(bus-pci-0000:06:08.1 in the example above) specify the physical
+network device, and will not change unless the device's bus location
+changes (for example, it is moved from one PCI slot to another).  The
+example above uses one of each type for demonstration purposes; most
+configurations will choose one or the other for all slave devices.
+
+When all configuration files have been modified or created,
+networking must be restarted for the configuration changes to take
+effect.  This can be accomplished via the following::
+
+	# /etc/init.d/network restart
+
+Note that the network control script (/sbin/ifdown) will
+remove the bonding module as part of the network shutdown processing,
+so it is not necessary to remove the module by hand if, e.g., the
+module parameters have changed.
+
+Also, at this writing, YaST/YaST2 will not manage bonding
+devices (they do not show bonding interfaces on its list of network
+devices).  It is necessary to edit the configuration file by hand to
+change the bonding configuration.
+
+Additional general options and details of the ifcfg file
+format can be found in an example ifcfg template file::
+
+	/etc/sysconfig/network/ifcfg.template
+
+Note that the template does not document the various ``BONDING_*``
+settings described above, but does describe many of the other options.
+
+3.1.1 Using DHCP with Sysconfig
+-------------------------------
+
+Under sysconfig, configuring a device with BOOTPROTO='dhcp'
+will cause it to query DHCP for its IP address information.  At this
+writing, this does not function for bonding devices; the scripts
+attempt to obtain the device address from DHCP prior to adding any of
+the slave devices.  Without active slaves, the DHCP requests are not
+sent to the network.
+
+3.1.2 Configuring Multiple Bonds with Sysconfig
+-----------------------------------------------
+
+The sysconfig network initialization system is capable of
+handling multiple bonding devices.  All that is necessary is for each
+bonding instance to have an appropriately configured ifcfg-bondX file
+(as described above).  Do not specify the "max_bonds" parameter to any
+instance of bonding, as this will confuse sysconfig.  If you require
+multiple bonding devices with identical parameters, create multiple
+ifcfg-bondX files.
+
+Because the sysconfig scripts supply the bonding module
+options in the ifcfg-bondX file, it is not necessary to add them to
+the system ``/etc/modules.d/*.conf`` configuration files.
+
+3.2 Configuration with Initscripts Support
+------------------------------------------
+
+This section applies to distros using a recent version of
+initscripts with bonding support, for example, Red Hat Enterprise Linux
+version 3 or later, Fedora, etc.  On these systems, the network
+initialization scripts have knowledge of bonding, and can be configured to
+control bonding devices.  Note that older versions of the initscripts
+package have lower levels of support for bonding; this will be noted where
+applicable.
+
+These distros will not automatically load the network adapter
+driver unless the ethX device is configured with an IP address.
+Because of this constraint, users must manually configure a
+network-script file for all physical adapters that will be members of
+a bondX link.  Network script files are located in the directory:
+
+/etc/sysconfig/network-scripts
+
+The file name must be prefixed with "ifcfg-eth" and suffixed
+with the adapter's physical adapter number.  For example, the script
+for eth0 would be named /etc/sysconfig/network-scripts/ifcfg-eth0.
+Place the following text in the file::
+
+	DEVICE=eth0
+	USERCTL=no
+	ONBOOT=yes
+	MASTER=bond0
+	SLAVE=yes
+	BOOTPROTO=none
+
+The DEVICE= line will be different for every ethX device and
+must correspond with the name of the file, i.e., ifcfg-eth1 must have
+a device line of DEVICE=eth1.  The setting of the MASTER= line will
+also depend on the final bonding interface name chosen for your bond.
+As with other network devices, these typically start at 0, and go up
+one for each device, i.e., the first bonding instance is bond0, the
+second is bond1, and so on.
+
+Next, create a bond network script.  The file name for this
+script will be /etc/sysconfig/network-scripts/ifcfg-bondX where X is
+the number of the bond.  For bond0 the file is named "ifcfg-bond0",
+for bond1 it is named "ifcfg-bond1", and so on.  Within that file,
+place the following text::
+
+	DEVICE=bond0
+	IPADDR=192.168.1.1
+	NETMASK=255.255.255.0
+	NETWORK=192.168.1.0
+	BROADCAST=192.168.1.255
+	ONBOOT=yes
+	BOOTPROTO=none
+	USERCTL=no
+
+Be sure to change the networking specific lines (IPADDR,
+NETMASK, NETWORK and BROADCAST) to match your network configuration.
+
+For later versions of initscripts, such as that found with Fedora
+7 (or later) and Red Hat Enterprise Linux version 5 (or later), it is possible,
+and, indeed, preferable, to specify the bonding options in the ifcfg-bond0
+file, e.g. a line of the format::
+
+  BONDING_OPTS="mode=active-backup arp_interval=60 arp_ip_target=192.168.1.254"
+
+will configure the bond with the specified options.  The options
+specified in BONDING_OPTS are identical to the bonding module parameters
+except for the arp_ip_target field when using versions of initscripts older
+than and 8.57 (Fedora 8) and 8.45.19 (Red Hat Enterprise Linux 5.2).  When
+using older versions each target should be included as a separate option and
+should be preceded by a '+' to indicate it should be added to the list of
+queried targets, e.g.,::
+
+    arp_ip_target=+192.168.1.1 arp_ip_target=+192.168.1.2
+
+is the proper syntax to specify multiple targets.  When specifying
+options via BONDING_OPTS, it is not necessary to edit
+``/etc/modprobe.d/*.conf``.
+
+For even older versions of initscripts that do not support
+BONDING_OPTS, it is necessary to edit /etc/modprobe.d/*.conf, depending upon
+your distro) to load the bonding module with your desired options when the
+bond0 interface is brought up.  The following lines in /etc/modprobe.d/*.conf
+will load the bonding module, and select its options:
+
+	alias bond0 bonding
+	options bond0 mode=balance-alb miimon=100
+
+Replace the sample parameters with the appropriate set of
+options for your configuration.
+
+Finally run "/etc/rc.d/init.d/network restart" as root.  This
+will restart the networking subsystem and your bond link should be now
+up and running.
+
+3.2.1 Using DHCP with Initscripts
+---------------------------------
+
+Recent versions of initscripts (the versions supplied with Fedora
+Core 3 and Red Hat Enterprise Linux 4, or later versions, are reported to
+work) have support for assigning IP information to bonding devices via
+DHCP.
+
+To configure bonding for DHCP, configure it as described
+above, except replace the line "BOOTPROTO=none" with "BOOTPROTO=dhcp"
+and add a line consisting of "TYPE=Bonding".  Note that the TYPE value
+is case sensitive.
+
+3.2.2 Configuring Multiple Bonds with Initscripts
+-------------------------------------------------
+
+Initscripts packages that are included with Fedora 7 and Red Hat
+Enterprise Linux 5 support multiple bonding interfaces by simply
+specifying the appropriate BONDING_OPTS= in ifcfg-bondX where X is the
+number of the bond.  This support requires sysfs support in the kernel,
+and a bonding driver of version 3.0.0 or later.  Other configurations may
+not support this method for specifying multiple bonding interfaces; for
+those instances, see the "Configuring Multiple Bonds Manually" section,
+below.
+
+3.3 Configuring Bonding Manually with iproute2
+-----------------------------------------------
+
+This section applies to distros whose network initialization
+scripts (the sysconfig or initscripts package) do not have specific
+knowledge of bonding.  One such distro is SuSE Linux Enterprise Server
+version 8.
+
+The general method for these systems is to place the bonding
+module parameters into a config file in /etc/modprobe.d/ (as
+appropriate for the installed distro), then add modprobe and/or
+`ip link` commands to the system's global init script.  The name of
+the global init script differs; for sysconfig, it is
+/etc/init.d/boot.local and for initscripts it is /etc/rc.d/rc.local.
+
+For example, if you wanted to make a simple bond of two e100
+devices (presumed to be eth0 and eth1), and have it persist across
+reboots, edit the appropriate file (/etc/init.d/boot.local or
+/etc/rc.d/rc.local), and add the following::
+
+	modprobe bonding mode=balance-alb miimon=100
+	modprobe e100
+	ifconfig bond0 192.168.1.1 netmask 255.255.255.0 up
+	ip link set eth0 master bond0
+	ip link set eth1 master bond0
+
+Replace the example bonding module parameters and bond0
+network configuration (IP address, netmask, etc) with the appropriate
+values for your configuration.
+
+Unfortunately, this method will not provide support for the
+ifup and ifdown scripts on the bond devices.  To reload the bonding
+configuration, it is necessary to run the initialization script, e.g.,::
+
+	# /etc/init.d/boot.local
+
+or::
+
+	# /etc/rc.d/rc.local
+
+It may be desirable in such a case to create a separate script
+which only initializes the bonding configuration, then call that
+separate script from within boot.local.  This allows for bonding to be
+enabled without re-running the entire global init script.
+
+To shut down the bonding devices, it is necessary to first
+mark the bonding device itself as being down, then remove the
+appropriate device driver modules.  For our example above, you can do
+the following::
+
+	# ifconfig bond0 down
+	# rmmod bonding
+	# rmmod e100
+
+Again, for convenience, it may be desirable to create a script
+with these commands.
+
+
+3.3.1 Configuring Multiple Bonds Manually
+-----------------------------------------
+
+This section contains information on configuring multiple
+bonding devices with differing options for those systems whose network
+initialization scripts lack support for configuring multiple bonds.
+
+If you require multiple bonding devices, but all with the same
+options, you may wish to use the "max_bonds" module parameter,
+documented above.
+
+To create multiple bonding devices with differing options, it is
+preferable to use bonding parameters exported by sysfs, documented in the
+section below.
+
+For versions of bonding without sysfs support, the only means to
+provide multiple instances of bonding with differing options is to load
+the bonding driver multiple times.  Note that current versions of the
+sysconfig network initialization scripts handle this automatically; if
+your distro uses these scripts, no special action is needed.  See the
+section Configuring Bonding Devices, above, if you're not sure about your
+network initialization scripts.
+
+To load multiple instances of the module, it is necessary to
+specify a different name for each instance (the module loading system
+requires that every loaded module, even multiple instances of the same
+module, have a unique name).  This is accomplished by supplying multiple
+sets of bonding options in ``/etc/modprobe.d/*.conf``, for example::
+
+	alias bond0 bonding
+	options bond0 -o bond0 mode=balance-rr miimon=100
+
+	alias bond1 bonding
+	options bond1 -o bond1 mode=balance-alb miimon=50
+
+will load the bonding module two times.  The first instance is
+named "bond0" and creates the bond0 device in balance-rr mode with an
+miimon of 100.  The second instance is named "bond1" and creates the
+bond1 device in balance-alb mode with an miimon of 50.
+
+In some circumstances (typically with older distributions),
+the above does not work, and the second bonding instance never sees
+its options.  In that case, the second options line can be substituted
+as follows::
+
+	install bond1 /sbin/modprobe --ignore-install bonding -o bond1 \
+				     mode=balance-alb miimon=50
+
+This may be repeated any number of times, specifying a new and
+unique name in place of bond1 for each subsequent instance.
+
+It has been observed that some Red Hat supplied kernels are unable
+to rename modules at load time (the "-o bond1" part).  Attempts to pass
+that option to modprobe will produce an "Operation not permitted" error.
+This has been reported on some Fedora Core kernels, and has been seen on
+RHEL 4 as well.  On kernels exhibiting this problem, it will be impossible
+to configure multiple bonds with differing parameters (as they are older
+kernels, and also lack sysfs support).
+
+3.4 Configuring Bonding Manually via Sysfs
+------------------------------------------
+
+Starting with version 3.0.0, Channel Bonding may be configured
+via the sysfs interface.  This interface allows dynamic configuration
+of all bonds in the system without unloading the module.  It also
+allows for adding and removing bonds at runtime.  Ifenslave is no
+longer required, though it is still supported.
+
+Use of the sysfs interface allows you to use multiple bonds
+with different configurations without having to reload the module.
+It also allows you to use multiple, differently configured bonds when
+bonding is compiled into the kernel.
+
+You must have the sysfs filesystem mounted to configure
+bonding this way.  The examples in this document assume that you
+are using the standard mount point for sysfs, e.g. /sys.  If your
+sysfs filesystem is mounted elsewhere, you will need to adjust the
+example paths accordingly.
+
+Creating and Destroying Bonds
+-----------------------------
+To add a new bond foo::
+
+	# echo +foo > /sys/class/net/bonding_masters
+
+To remove an existing bond bar::
+
+	# echo -bar > /sys/class/net/bonding_masters
+
+To show all existing bonds::
+
+	# cat /sys/class/net/bonding_masters
+
+.. note::
+
+   due to 4K size limitation of sysfs files, this list may be
+   truncated if you have more than a few hundred bonds.  This is unlikely
+   to occur under normal operating conditions.
+
+Adding and Removing Slaves
+--------------------------
+Interfaces may be enslaved to a bond using the file
+/sys/class/net/<bond>/bonding/slaves.  The semantics for this file
+are the same as for the bonding_masters file.
+
+To enslave interface eth0 to bond bond0::
+
+	# ifconfig bond0 up
+	# echo +eth0 > /sys/class/net/bond0/bonding/slaves
+
+To free slave eth0 from bond bond0::
+
+	# echo -eth0 > /sys/class/net/bond0/bonding/slaves
+
+When an interface is enslaved to a bond, symlinks between the
+two are created in the sysfs filesystem.  In this case, you would get
+/sys/class/net/bond0/slave_eth0 pointing to /sys/class/net/eth0, and
+/sys/class/net/eth0/master pointing to /sys/class/net/bond0.
+
+This means that you can tell quickly whether or not an
+interface is enslaved by looking for the master symlink.  Thus:
+# echo -eth0 > /sys/class/net/eth0/master/bonding/slaves
+will free eth0 from whatever bond it is enslaved to, regardless of
+the name of the bond interface.
+
+Changing a Bond's Configuration
+-------------------------------
+Each bond may be configured individually by manipulating the
+files located in /sys/class/net/<bond name>/bonding
+
+The names of these files correspond directly with the command-
+line parameters described elsewhere in this file, and, with the
+exception of arp_ip_target, they accept the same values.  To see the
+current setting, simply cat the appropriate file.
+
+A few examples will be given here; for specific usage
+guidelines for each parameter, see the appropriate section in this
+document.
+
+To configure bond0 for balance-alb mode::
+
+	# ifconfig bond0 down
+	# echo 6 > /sys/class/net/bond0/bonding/mode
+	- or -
+	# echo balance-alb > /sys/class/net/bond0/bonding/mode
+
+.. note::
+
+   The bond interface must be down before the mode can be changed.
+
+To enable MII monitoring on bond0 with a 1 second interval::
+
+	# echo 1000 > /sys/class/net/bond0/bonding/miimon
+
+.. note::
+
+   If ARP monitoring is enabled, it will disabled when MII
+   monitoring is enabled, and vice-versa.
+
+To add ARP targets::
+
+	# echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
+	# echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
+
+.. note::
+
+   up to 16 target addresses may be specified.
+
+To remove an ARP target::
+
+	# echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
+
+To configure the interval between learning packet transmits::
+
+	# echo 12 > /sys/class/net/bond0/bonding/lp_interval
+
+.. note::
+
+   the lp_interval is the number of seconds between instances where
+   the bonding driver sends learning packets to each slaves peer switch.  The
+   default interval is 1 second.
+
+Example Configuration
+---------------------
+We begin with the same example that is shown in section 3.3,
+executed with sysfs, and without using ifenslave.
+
+To make a simple bond of two e100 devices (presumed to be eth0
+and eth1), and have it persist across reboots, edit the appropriate
+file (/etc/init.d/boot.local or /etc/rc.d/rc.local), and add the
+following::
+
+	modprobe bonding
+	modprobe e100
+	echo balance-alb > /sys/class/net/bond0/bonding/mode
+	ifconfig bond0 192.168.1.1 netmask 255.255.255.0 up
+	echo 100 > /sys/class/net/bond0/bonding/miimon
+	echo +eth0 > /sys/class/net/bond0/bonding/slaves
+	echo +eth1 > /sys/class/net/bond0/bonding/slaves
+
+To add a second bond, with two e1000 interfaces in
+active-backup mode, using ARP monitoring, add the following lines to
+your init script::
+
+	modprobe e1000
+	echo +bond1 > /sys/class/net/bonding_masters
+	echo active-backup > /sys/class/net/bond1/bonding/mode
+	ifconfig bond1 192.168.2.1 netmask 255.255.255.0 up
+	echo +192.168.2.100 /sys/class/net/bond1/bonding/arp_ip_target
+	echo 2000 > /sys/class/net/bond1/bonding/arp_interval
+	echo +eth2 > /sys/class/net/bond1/bonding/slaves
+	echo +eth3 > /sys/class/net/bond1/bonding/slaves
+
+3.5 Configuration with Interfaces Support
+-----------------------------------------
+
+This section applies to distros which use /etc/network/interfaces file
+to describe network interface configuration, most notably Debian and it's
+derivatives.
+
+The ifup and ifdown commands on Debian don't support bonding out of
+the box. The ifenslave-2.6 package should be installed to provide bonding
+support.  Once installed, this package will provide ``bond-*`` options
+to be used into /etc/network/interfaces.
+
+Note that ifenslave-2.6 package will load the bonding module and use
+the ifenslave command when appropriate.
+
+Example Configurations
+----------------------
+
+In /etc/network/interfaces, the following stanza will configure bond0, in
+active-backup mode, with eth0 and eth1 as slaves::
+
+	auto bond0
+	iface bond0 inet dhcp
+		bond-slaves eth0 eth1
+		bond-mode active-backup
+		bond-miimon 100
+		bond-primary eth0 eth1
+
+If the above configuration doesn't work, you might have a system using
+upstart for system startup. This is most notably true for recent
+Ubuntu versions. The following stanza in /etc/network/interfaces will
+produce the same result on those systems::
+
+	auto bond0
+	iface bond0 inet dhcp
+		bond-slaves none
+		bond-mode active-backup
+		bond-miimon 100
+
+	auto eth0
+	iface eth0 inet manual
+		bond-master bond0
+		bond-primary eth0 eth1
+
+	auto eth1
+	iface eth1 inet manual
+		bond-master bond0
+		bond-primary eth0 eth1
+
+For a full list of ``bond-*`` supported options in /etc/network/interfaces and
+some more advanced examples tailored to you particular distros, see the files in
+/usr/share/doc/ifenslave-2.6.
+
+3.6 Overriding Configuration for Special Cases
+----------------------------------------------
+
+When using the bonding driver, the physical port which transmits a frame is
+typically selected by the bonding driver, and is not relevant to the user or
+system administrator.  The output port is simply selected using the policies of
+the selected bonding mode.  On occasion however, it is helpful to direct certain
+classes of traffic to certain physical interfaces on output to implement
+slightly more complex policies.  For example, to reach a web server over a
+bonded interface in which eth0 connects to a private network, while eth1
+connects via a public network, it may be desirous to bias the bond to send said
+traffic over eth0 first, using eth1 only as a fall back, while all other traffic
+can safely be sent over either interface.  Such configurations may be achieved
+using the traffic control utilities inherent in linux.
+
+By default the bonding driver is multiqueue aware and 16 queues are created
+when the driver initializes (see Documentation/networking/multiqueue.txt
+for details).  If more or less queues are desired the module parameter
+tx_queues can be used to change this value.  There is no sysfs parameter
+available as the allocation is done at module init time.
+
+The output of the file /proc/net/bonding/bondX has changed so the output Queue
+ID is now printed for each slave::
+
+	Bonding Mode: fault-tolerance (active-backup)
+	Primary Slave: None
+	Currently Active Slave: eth0
+	MII Status: up
+	MII Polling Interval (ms): 0
+	Up Delay (ms): 0
+	Down Delay (ms): 0
+
+	Slave Interface: eth0
+	MII Status: up
+	Link Failure Count: 0
+	Permanent HW addr: 00:1a:a0:12:8f:cb
+	Slave queue ID: 0
+
+	Slave Interface: eth1
+	MII Status: up
+	Link Failure Count: 0
+	Permanent HW addr: 00:1a:a0:12:8f:cc
+	Slave queue ID: 2
+
+The queue_id for a slave can be set using the command::
+
+	# echo "eth1:2" > /sys/class/net/bond0/bonding/queue_id
+
+Any interface that needs a queue_id set should set it with multiple calls
+like the one above until proper priorities are set for all interfaces.  On
+distributions that allow configuration via initscripts, multiple 'queue_id'
+arguments can be added to BONDING_OPTS to set all needed slave queues.
+
+These queue id's can be used in conjunction with the tc utility to configure
+a multiqueue qdisc and filters to bias certain traffic to transmit on certain
+slave devices.  For instance, say we wanted, in the above configuration to
+force all traffic bound to 192.168.1.100 to use eth1 in the bond as its output
+device. The following commands would accomplish this::
+
+	# tc qdisc add dev bond0 handle 1 root multiq
+
+	# tc filter add dev bond0 protocol ip parent 1: prio 1 u32 match ip \
+		dst 192.168.1.100 action skbedit queue_mapping 2
+
+These commands tell the kernel to attach a multiqueue queue discipline to the
+bond0 interface and filter traffic enqueued to it, such that packets with a dst
+ip of 192.168.1.100 have their output queue mapping value overwritten to 2.
+This value is then passed into the driver, causing the normal output path
+selection policy to be overridden, selecting instead qid 2, which maps to eth1.
+
+Note that qid values begin at 1.  Qid 0 is reserved to initiate to the driver
+that normal output policy selection should take place.  One benefit to simply
+leaving the qid for a slave to 0 is the multiqueue awareness in the bonding
+driver that is now present.  This awareness allows tc filters to be placed on
+slave devices as well as bond devices and the bonding driver will simply act as
+a pass-through for selecting output queues on the slave device rather than
+output port selection.
+
+This feature first appeared in bonding driver version 3.7.0 and support for
+output slave selection was limited to round-robin and active-backup modes.
+
+3.7 Configuring LACP for 802.3ad mode in a more secure way
+----------------------------------------------------------
+
+When using 802.3ad bonding mode, the Actor (host) and Partner (switch)
+exchange LACPDUs.  These LACPDUs cannot be sniffed, because they are
+destined to link local mac addresses (which switches/bridges are not
+supposed to forward).  However, most of the values are easily predictable
+or are simply the machine's MAC address (which is trivially known to all
+other hosts in the same L2).  This implies that other machines in the L2
+domain can spoof LACPDU packets from other hosts to the switch and potentially
+cause mayhem by joining (from the point of view of the switch) another
+machine's aggregate, thus receiving a portion of that hosts incoming
+traffic and / or spoofing traffic from that machine themselves (potentially
+even successfully terminating some portion of flows). Though this is not
+a likely scenario, one could avoid this possibility by simply configuring
+few bonding parameters:
+
+   (a) ad_actor_system : You can set a random mac-address that can be used for
+       these LACPDU exchanges. The value can not be either NULL or Multicast.
+       Also it's preferable to set the local-admin bit. Following shell code
+       generates a random mac-address as described above::
+
+	      # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \
+				       $(( (RANDOM & 0xFE) | 0x02 )) \
+				       $(( RANDOM & 0xFF )) \
+				       $(( RANDOM & 0xFF )) \
+				       $(( RANDOM & 0xFF )) \
+				       $(( RANDOM & 0xFF )) \
+				       $(( RANDOM & 0xFF )))
+	      # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system
+
+   (b) ad_actor_sys_prio : Randomize the system priority. The default value
+       is 65535, but system can take the value from 1 - 65535. Following shell
+       code generates random priority and sets it::
+
+	    # sys_prio=$(( 1 + RANDOM + RANDOM ))
+	    # echo $sys_prio > /sys/class/net/bond0/bonding/ad_actor_sys_prio
+
+   (c) ad_user_port_key : Use the user portion of the port-key. The default
+       keeps this empty. These are the upper 10 bits of the port-key and value
+       ranges from 0 - 1023. Following shell code generates these 10 bits and
+       sets it::
+
+	    # usr_port_key=$(( RANDOM & 0x3FF ))
+	    # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key
+
+
+4 Querying Bonding Configuration
+=================================
+
+4.1 Bonding Configuration
+-------------------------
+
+Each bonding device has a read-only file residing in the
+/proc/net/bonding directory.  The file contents include information
+about the bonding configuration, options and state of each slave.
+
+For example, the contents of /proc/net/bonding/bond0 after the
+driver is loaded with parameters of mode=0 and miimon=1000 is
+generally as follows::
+
+	Ethernet Channel Bonding Driver: 2.6.1 (October 29, 2004)
+	Bonding Mode: load balancing (round-robin)
+	Currently Active Slave: eth0
+	MII Status: up
+	MII Polling Interval (ms): 1000
+	Up Delay (ms): 0
+	Down Delay (ms): 0
+
+	Slave Interface: eth1
+	MII Status: up
+	Link Failure Count: 1
+
+	Slave Interface: eth0
+	MII Status: up
+	Link Failure Count: 1
+
+The precise format and contents will change depending upon the
+bonding configuration, state, and version of the bonding driver.
+
+4.2 Network configuration
+-------------------------
+
+The network configuration can be inspected using the ifconfig
+command.  Bonding devices will have the MASTER flag set; Bonding slave
+devices will have the SLAVE flag set.  The ifconfig output does not
+contain information on which slaves are associated with which masters.
+
+In the example below, the bond0 interface is the master
+(MASTER) while eth0 and eth1 are slaves (SLAVE). Notice all slaves of
+bond0 have the same MAC address (HWaddr) as bond0 for all modes except
+TLB and ALB that require a unique MAC address for each slave::
+
+  # /sbin/ifconfig
+  bond0     Link encap:Ethernet  HWaddr 00:C0:F0:1F:37:B4
+	    inet addr:XXX.XXX.XXX.YYY  Bcast:XXX.XXX.XXX.255  Mask:255.255.252.0
+	    UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
+	    RX packets:7224794 errors:0 dropped:0 overruns:0 frame:0
+	    TX packets:3286647 errors:1 dropped:0 overruns:1 carrier:0
+	    collisions:0 txqueuelen:0
+
+  eth0      Link encap:Ethernet  HWaddr 00:C0:F0:1F:37:B4
+	    UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
+	    RX packets:3573025 errors:0 dropped:0 overruns:0 frame:0
+	    TX packets:1643167 errors:1 dropped:0 overruns:1 carrier:0
+	    collisions:0 txqueuelen:100
+	    Interrupt:10 Base address:0x1080
+
+  eth1      Link encap:Ethernet  HWaddr 00:C0:F0:1F:37:B4
+	    UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
+	    RX packets:3651769 errors:0 dropped:0 overruns:0 frame:0
+	    TX packets:1643480 errors:0 dropped:0 overruns:0 carrier:0
+	    collisions:0 txqueuelen:100
+	    Interrupt:9 Base address:0x1400
+
+5. Switch Configuration
+=======================
+
+For this section, "switch" refers to whatever system the
+bonded devices are directly connected to (i.e., where the other end of
+the cable plugs into).  This may be an actual dedicated switch device,
+or it may be another regular system (e.g., another computer running
+Linux),
+
+The active-backup, balance-tlb and balance-alb modes do not
+require any specific configuration of the switch.
+
+The 802.3ad mode requires that the switch have the appropriate
+ports configured as an 802.3ad aggregation.  The precise method used
+to configure this varies from switch to switch, but, for example, a
+Cisco 3550 series switch requires that the appropriate ports first be
+grouped together in a single etherchannel instance, then that
+etherchannel is set to mode "lacp" to enable 802.3ad (instead of
+standard EtherChannel).
+
+The balance-rr, balance-xor and broadcast modes generally
+require that the switch have the appropriate ports grouped together.
+The nomenclature for such a group differs between switches, it may be
+called an "etherchannel" (as in the Cisco example, above), a "trunk
+group" or some other similar variation.  For these modes, each switch
+will also have its own configuration options for the switch's transmit
+policy to the bond.  Typical choices include XOR of either the MAC or
+IP addresses.  The transmit policy of the two peers does not need to
+match.  For these three modes, the bonding mode really selects a
+transmit policy for an EtherChannel group; all three will interoperate
+with another EtherChannel group.
+
+
+6. 802.1q VLAN Support
+======================
+
+It is possible to configure VLAN devices over a bond interface
+using the 8021q driver.  However, only packets coming from the 8021q
+driver and passing through bonding will be tagged by default.  Self
+generated packets, for example, bonding's learning packets or ARP
+packets generated by either ALB mode or the ARP monitor mechanism, are
+tagged internally by bonding itself.  As a result, bonding must
+"learn" the VLAN IDs configured above it, and use those IDs to tag
+self generated packets.
+
+For reasons of simplicity, and to support the use of adapters
+that can do VLAN hardware acceleration offloading, the bonding
+interface declares itself as fully hardware offloading capable, it gets
+the add_vid/kill_vid notifications to gather the necessary
+information, and it propagates those actions to the slaves.  In case
+of mixed adapter types, hardware accelerated tagged packets that
+should go through an adapter that is not offloading capable are
+"un-accelerated" by the bonding driver so the VLAN tag sits in the
+regular location.
+
+VLAN interfaces *must* be added on top of a bonding interface
+only after enslaving at least one slave.  The bonding interface has a
+hardware address of 00:00:00:00:00:00 until the first slave is added.
+If the VLAN interface is created prior to the first enslavement, it
+would pick up the all-zeroes hardware address.  Once the first slave
+is attached to the bond, the bond device itself will pick up the
+slave's hardware address, which is then available for the VLAN device.
+
+Also, be aware that a similar problem can occur if all slaves
+are released from a bond that still has one or more VLAN interfaces on
+top of it.  When a new slave is added, the bonding interface will
+obtain its hardware address from the first slave, which might not
+match the hardware address of the VLAN interfaces (which was
+ultimately copied from an earlier slave).
+
+There are two methods to insure that the VLAN device operates
+with the correct hardware address if all slaves are removed from a
+bond interface:
+
+1. Remove all VLAN interfaces then recreate them
+
+2. Set the bonding interface's hardware address so that it
+matches the hardware address of the VLAN interfaces.
+
+Note that changing a VLAN interface's HW address would set the
+underlying device -- i.e. the bonding interface -- to promiscuous
+mode, which might not be what you want.
+
+
+7. Link Monitoring
+==================
+
+The bonding driver at present supports two schemes for
+monitoring a slave device's link state: the ARP monitor and the MII
+monitor.
+
+At the present time, due to implementation restrictions in the
+bonding driver itself, it is not possible to enable both ARP and MII
+monitoring simultaneously.
+
+7.1 ARP Monitor Operation
+-------------------------
+
+The ARP monitor operates as its name suggests: it sends ARP
+queries to one or more designated peer systems on the network, and
+uses the response as an indication that the link is operating.  This
+gives some assurance that traffic is actually flowing to and from one
+or more peers on the local network.
+
+The ARP monitor relies on the device driver itself to verify
+that traffic is flowing.  In particular, the driver must keep up to
+date the last receive time, dev->last_rx.  Drivers that use NETIF_F_LLTX
+flag must also update netdev_queue->trans_start.  If they do not, then the
+ARP monitor will immediately fail any slaves using that driver, and
+those slaves will stay down.  If networking monitoring (tcpdump, etc)
+shows the ARP requests and replies on the network, then it may be that
+your device driver is not updating last_rx and trans_start.
+
+7.2 Configuring Multiple ARP Targets
+------------------------------------
+
+While ARP monitoring can be done with just one target, it can
+be useful in a High Availability setup to have several targets to
+monitor.  In the case of just one target, the target itself may go
+down or have a problem making it unresponsive to ARP requests.  Having
+an additional target (or several) increases the reliability of the ARP
+monitoring.
+
+Multiple ARP targets must be separated by commas as follows::
+
+ # example options for ARP monitoring with three targets
+ alias bond0 bonding
+ options bond0 arp_interval=60 arp_ip_target=192.168.0.1,192.168.0.3,192.168.0.9
+
+For just a single target the options would resemble::
+
+    # example options for ARP monitoring with one target
+    alias bond0 bonding
+    options bond0 arp_interval=60 arp_ip_target=192.168.0.100
+
+
+7.3 MII Monitor Operation
+-------------------------
+
+The MII monitor monitors only the carrier state of the local
+network interface.  It accomplishes this in one of three ways: by
+depending upon the device driver to maintain its carrier state, by
+querying the device's MII registers, or by making an ethtool query to
+the device.
+
+If the use_carrier module parameter is 1 (the default value),
+then the MII monitor will rely on the driver for carrier state
+information (via the netif_carrier subsystem).  As explained in the
+use_carrier parameter information, above, if the MII monitor fails to
+detect carrier loss on the device (e.g., when the cable is physically
+disconnected), it may be that the driver does not support
+netif_carrier.
+
+If use_carrier is 0, then the MII monitor will first query the
+device's (via ioctl) MII registers and check the link state.  If that
+request fails (not just that it returns carrier down), then the MII
+monitor will make an ethtool ETHOOL_GLINK request to attempt to obtain
+the same information.  If both methods fail (i.e., the driver either
+does not support or had some error in processing both the MII register
+and ethtool requests), then the MII monitor will assume the link is
+up.
+
+8. Potential Sources of Trouble
+===============================
+
+8.1 Adventures in Routing
+-------------------------
+
+When bonding is configured, it is important that the slave
+devices not have routes that supersede routes of the master (or,
+generally, not have routes at all).  For example, suppose the bonding
+device bond0 has two slaves, eth0 and eth1, and the routing table is
+as follows::
+
+  Kernel IP routing table
+  Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
+  10.0.0.0        0.0.0.0         255.255.0.0     U        40 0          0 eth0
+  10.0.0.0        0.0.0.0         255.255.0.0     U        40 0          0 eth1
+  10.0.0.0        0.0.0.0         255.255.0.0     U        40 0          0 bond0
+  127.0.0.0       0.0.0.0         255.0.0.0       U        40 0          0 lo
+
+This routing configuration will likely still update the
+receive/transmit times in the driver (needed by the ARP monitor), but
+may bypass the bonding driver (because outgoing traffic to, in this
+case, another host on network 10 would use eth0 or eth1 before bond0).
+
+The ARP monitor (and ARP itself) may become confused by this
+configuration, because ARP requests (generated by the ARP monitor)
+will be sent on one interface (bond0), but the corresponding reply
+will arrive on a different interface (eth0).  This reply looks to ARP
+as an unsolicited ARP reply (because ARP matches replies on an
+interface basis), and is discarded.  The MII monitor is not affected
+by the state of the routing table.
+
+The solution here is simply to insure that slaves do not have
+routes of their own, and if for some reason they must, those routes do
+not supersede routes of their master.  This should generally be the
+case, but unusual configurations or errant manual or automatic static
+route additions may cause trouble.
+
+8.2 Ethernet Device Renaming
+----------------------------
+
+On systems with network configuration scripts that do not
+associate physical devices directly with network interface names (so
+that the same physical device always has the same "ethX" name), it may
+be necessary to add some special logic to config files in
+/etc/modprobe.d/.
+
+For example, given a modules.conf containing the following::
+
+	alias bond0 bonding
+	options bond0 mode=some-mode miimon=50
+	alias eth0 tg3
+	alias eth1 tg3
+	alias eth2 e1000
+	alias eth3 e1000
+
+If neither eth0 and eth1 are slaves to bond0, then when the
+bond0 interface comes up, the devices may end up reordered.  This
+happens because bonding is loaded first, then its slave device's
+drivers are loaded next.  Since no other drivers have been loaded,
+when the e1000 driver loads, it will receive eth0 and eth1 for its
+devices, but the bonding configuration tries to enslave eth2 and eth3
+(which may later be assigned to the tg3 devices).
+
+Adding the following::
+
+	add above bonding e1000 tg3
+
+causes modprobe to load e1000 then tg3, in that order, when
+bonding is loaded.  This command is fully documented in the
+modules.conf manual page.
+
+On systems utilizing modprobe an equivalent problem can occur.
+In this case, the following can be added to config files in
+/etc/modprobe.d/ as::
+
+	softdep bonding pre: tg3 e1000
+
+This will load tg3 and e1000 modules before loading the bonding one.
+Full documentation on this can be found in the modprobe.d and modprobe
+manual pages.
+
+8.3. Painfully Slow Or No Failed Link Detection By Miimon
+---------------------------------------------------------
+
+By default, bonding enables the use_carrier option, which
+instructs bonding to trust the driver to maintain carrier state.
+
+As discussed in the options section, above, some drivers do
+not support the netif_carrier_on/_off link state tracking system.
+With use_carrier enabled, bonding will always see these links as up,
+regardless of their actual state.
+
+Additionally, other drivers do support netif_carrier, but do
+not maintain it in real time, e.g., only polling the link state at
+some fixed interval.  In this case, miimon will detect failures, but
+only after some long period of time has expired.  If it appears that
+miimon is very slow in detecting link failures, try specifying
+use_carrier=0 to see if that improves the failure detection time.  If
+it does, then it may be that the driver checks the carrier state at a
+fixed interval, but does not cache the MII register values (so the
+use_carrier=0 method of querying the registers directly works).  If
+use_carrier=0 does not improve the failover, then the driver may cache
+the registers, or the problem may be elsewhere.
+
+Also, remember that miimon only checks for the device's
+carrier state.  It has no way to determine the state of devices on or
+beyond other ports of a switch, or if a switch is refusing to pass
+traffic while still maintaining carrier on.
+
+9. SNMP agents
+===============
+
+If running SNMP agents, the bonding driver should be loaded
+before any network drivers participating in a bond.  This requirement
+is due to the interface index (ipAdEntIfIndex) being associated to
+the first interface found with a given IP address.  That is, there is
+only one ipAdEntIfIndex for each IP address.  For example, if eth0 and
+eth1 are slaves of bond0 and the driver for eth0 is loaded before the
+bonding driver, the interface for the IP address will be associated
+with the eth0 interface.  This configuration is shown below, the IP
+address 192.168.1.1 has an interface index of 2 which indexes to eth0
+in the ifDescr table (ifDescr.2).
+
+::
+
+     interfaces.ifTable.ifEntry.ifDescr.1 = lo
+     interfaces.ifTable.ifEntry.ifDescr.2 = eth0
+     interfaces.ifTable.ifEntry.ifDescr.3 = eth1
+     interfaces.ifTable.ifEntry.ifDescr.4 = eth2
+     interfaces.ifTable.ifEntry.ifDescr.5 = eth3
+     interfaces.ifTable.ifEntry.ifDescr.6 = bond0
+     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.10.10.10.10 = 5
+     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.192.168.1.1 = 2
+     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.10.74.20.94 = 4
+     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.127.0.0.1 = 1
+
+This problem is avoided by loading the bonding driver before
+any network drivers participating in a bond.  Below is an example of
+loading the bonding driver first, the IP address 192.168.1.1 is
+correctly associated with ifDescr.2.
+
+     interfaces.ifTable.ifEntry.ifDescr.1 = lo
+     interfaces.ifTable.ifEntry.ifDescr.2 = bond0
+     interfaces.ifTable.ifEntry.ifDescr.3 = eth0
+     interfaces.ifTable.ifEntry.ifDescr.4 = eth1
+     interfaces.ifTable.ifEntry.ifDescr.5 = eth2
+     interfaces.ifTable.ifEntry.ifDescr.6 = eth3
+     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.10.10.10.10 = 6
+     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.192.168.1.1 = 2
+     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.10.74.20.94 = 5
+     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.127.0.0.1 = 1
+
+While some distributions may not report the interface name in
+ifDescr, the association between the IP address and IfIndex remains
+and SNMP functions such as Interface_Scan_Next will report that
+association.
+
+10. Promiscuous mode
+====================
+
+When running network monitoring tools, e.g., tcpdump, it is
+common to enable promiscuous mode on the device, so that all traffic
+is seen (instead of seeing only traffic destined for the local host).
+The bonding driver handles promiscuous mode changes to the bonding
+master device (e.g., bond0), and propagates the setting to the slave
+devices.
+
+For the balance-rr, balance-xor, broadcast, and 802.3ad modes,
+the promiscuous mode setting is propagated to all slaves.
+
+For the active-backup, balance-tlb and balance-alb modes, the
+promiscuous mode setting is propagated only to the active slave.
+
+For balance-tlb mode, the active slave is the slave currently
+receiving inbound traffic.
+
+For balance-alb mode, the active slave is the slave used as a
+"primary."  This slave is used for mode-specific control traffic, for
+sending to peers that are unassigned or if the load is unbalanced.
+
+For the active-backup, balance-tlb and balance-alb modes, when
+the active slave changes (e.g., due to a link failure), the
+promiscuous setting will be propagated to the new active slave.
+
+11. Configuring Bonding for High Availability
+=============================================
+
+High Availability refers to configurations that provide
+maximum network availability by having redundant or backup devices,
+links or switches between the host and the rest of the world.  The
+goal is to provide the maximum availability of network connectivity
+(i.e., the network always works), even though other configurations
+could provide higher throughput.
+
+11.1 High Availability in a Single Switch Topology
+--------------------------------------------------
+
+If two hosts (or a host and a single switch) are directly
+connected via multiple physical links, then there is no availability
+penalty to optimizing for maximum bandwidth.  In this case, there is
+only one switch (or peer), so if it fails, there is no alternative
+access to fail over to.  Additionally, the bonding load balance modes
+support link monitoring of their members, so if individual links fail,
+the load will be rebalanced across the remaining devices.
+
+See Section 12, "Configuring Bonding for Maximum Throughput"
+for information on configuring bonding with one peer device.
+
+11.2 High Availability in a Multiple Switch Topology
+----------------------------------------------------
+
+With multiple switches, the configuration of bonding and the
+network changes dramatically.  In multiple switch topologies, there is
+a trade off between network availability and usable bandwidth.
+
+Below is a sample network, configured to maximize the
+availability of the network::
+
+		|                                     |
+		|port3                           port3|
+	  +-----+----+                          +-----+----+
+	  |          |port2       ISL      port2|          |
+	  | switch A +--------------------------+ switch B |
+	  |          |                          |          |
+	  +-----+----+                          +-----++---+
+		|port1                           port1|
+		|             +-------+               |
+		+-------------+ host1 +---------------+
+			 eth0 +-------+ eth1
+
+In this configuration, there is a link between the two
+switches (ISL, or inter switch link), and multiple ports connecting to
+the outside world ("port3" on each switch).  There is no technical
+reason that this could not be extended to a third switch.
+
+11.2.1 HA Bonding Mode Selection for Multiple Switch Topology
+-------------------------------------------------------------
+
+In a topology such as the example above, the active-backup and
+broadcast modes are the only useful bonding modes when optimizing for
+availability; the other modes require all links to terminate on the
+same peer for them to behave rationally.
+
+active-backup:
+	This is generally the preferred mode, particularly if
+	the switches have an ISL and play together well.  If the
+	network configuration is such that one switch is specifically
+	a backup switch (e.g., has lower capacity, higher cost, etc),
+	then the primary option can be used to insure that the
+	preferred link is always used when it is available.
+
+broadcast:
+	This mode is really a special purpose mode, and is suitable
+	only for very specific needs.  For example, if the two
+	switches are not connected (no ISL), and the networks beyond
+	them are totally independent.  In this case, if it is
+	necessary for some specific one-way traffic to reach both
+	independent networks, then the broadcast mode may be suitable.
+
+11.2.2 HA Link Monitoring Selection for Multiple Switch Topology
+----------------------------------------------------------------
+
+The choice of link monitoring ultimately depends upon your
+switch.  If the switch can reliably fail ports in response to other
+failures, then either the MII or ARP monitors should work.  For
+example, in the above example, if the "port3" link fails at the remote
+end, the MII monitor has no direct means to detect this.  The ARP
+monitor could be configured with a target at the remote end of port3,
+thus detecting that failure without switch support.
+
+In general, however, in a multiple switch topology, the ARP
+monitor can provide a higher level of reliability in detecting end to
+end connectivity failures (which may be caused by the failure of any
+individual component to pass traffic for any reason).  Additionally,
+the ARP monitor should be configured with multiple targets (at least
+one for each switch in the network).  This will insure that,
+regardless of which switch is active, the ARP monitor has a suitable
+target to query.
+
+Note, also, that of late many switches now support a functionality
+generally referred to as "trunk failover."  This is a feature of the
+switch that causes the link state of a particular switch port to be set
+down (or up) when the state of another switch port goes down (or up).
+Its purpose is to propagate link failures from logically "exterior" ports
+to the logically "interior" ports that bonding is able to monitor via
+miimon.  Availability and configuration for trunk failover varies by
+switch, but this can be a viable alternative to the ARP monitor when using
+suitable switches.
+
+12. Configuring Bonding for Maximum Throughput
+==============================================
+
+12.1 Maximizing Throughput in a Single Switch Topology
+------------------------------------------------------
+
+In a single switch configuration, the best method to maximize
+throughput depends upon the application and network environment.  The
+various load balancing modes each have strengths and weaknesses in
+different environments, as detailed below.
+
+For this discussion, we will break down the topologies into
+two categories.  Depending upon the destination of most traffic, we
+categorize them into either "gatewayed" or "local" configurations.
+
+In a gatewayed configuration, the "switch" is acting primarily
+as a router, and the majority of traffic passes through this router to
+other networks.  An example would be the following::
+
+
+     +----------+                     +----------+
+     |          |eth0            port1|          | to other networks
+     | Host A   +---------------------+ router   +------------------->
+     |          +---------------------+          | Hosts B and C are out
+     |          |eth1            port2|          | here somewhere
+     +----------+                     +----------+
+
+The router may be a dedicated router device, or another host
+acting as a gateway.  For our discussion, the important point is that
+the majority of traffic from Host A will pass through the router to
+some other network before reaching its final destination.
+
+In a gatewayed network configuration, although Host A may
+communicate with many other systems, all of its traffic will be sent
+and received via one other peer on the local network, the router.
+
+Note that the case of two systems connected directly via
+multiple physical links is, for purposes of configuring bonding, the
+same as a gatewayed configuration.  In that case, it happens that all
+traffic is destined for the "gateway" itself, not some other network
+beyond the gateway.
+
+In a local configuration, the "switch" is acting primarily as
+a switch, and the majority of traffic passes through this switch to
+reach other stations on the same network.  An example would be the
+following::
+
+    +----------+            +----------+       +--------+
+    |          |eth0   port1|          +-------+ Host B |
+    |  Host A  +------------+  switch  |port3  +--------+
+    |          +------------+          |                  +--------+
+    |          |eth1   port2|          +------------------+ Host C |
+    +----------+            +----------+port4             +--------+
+
+
+Again, the switch may be a dedicated switch device, or another
+host acting as a gateway.  For our discussion, the important point is
+that the majority of traffic from Host A is destined for other hosts
+on the same local network (Hosts B and C in the above example).
+
+In summary, in a gatewayed configuration, traffic to and from
+the bonded device will be to the same MAC level peer on the network
+(the gateway itself, i.e., the router), regardless of its final
+destination.  In a local configuration, traffic flows directly to and
+from the final destinations, thus, each destination (Host B, Host C)
+will be addressed directly by their individual MAC addresses.
+
+This distinction between a gatewayed and a local network
+configuration is important because many of the load balancing modes
+available use the MAC addresses of the local network source and
+destination to make load balancing decisions.  The behavior of each
+mode is described below.
+
+
+12.1.1 MT Bonding Mode Selection for Single Switch Topology
+-----------------------------------------------------------
+
+This configuration is the easiest to set up and to understand,
+although you will have to decide which bonding mode best suits your
+needs.  The trade offs for each mode are detailed below:
+
+balance-rr:
+	This mode is the only mode that will permit a single
+	TCP/IP connection to stripe traffic across multiple
+	interfaces. It is therefore the only mode that will allow a
+	single TCP/IP stream to utilize more than one interface's
+	worth of throughput.  This comes at a cost, however: the
+	striping generally results in peer systems receiving packets out
+	of order, causing TCP/IP's congestion control system to kick
+	in, often by retransmitting segments.
+
+	It is possible to adjust TCP/IP's congestion limits by
+	altering the net.ipv4.tcp_reordering sysctl parameter.  The
+	usual default value is 3. But keep in mind TCP stack is able
+	to automatically increase this when it detects reorders.
+
+	Note that the fraction of packets that will be delivered out of
+	order is highly variable, and is unlikely to be zero.  The level
+	of reordering depends upon a variety of factors, including the
+	networking interfaces, the switch, and the topology of the
+	configuration.  Speaking in general terms, higher speed network
+	cards produce more reordering (due to factors such as packet
+	coalescing), and a "many to many" topology will reorder at a
+	higher rate than a "many slow to one fast" configuration.
+
+	Many switches do not support any modes that stripe traffic
+	(instead choosing a port based upon IP or MAC level addresses);
+	for those devices, traffic for a particular connection flowing
+	through the switch to a balance-rr bond will not utilize greater
+	than one interface's worth of bandwidth.
+
+	If you are utilizing protocols other than TCP/IP, UDP for
+	example, and your application can tolerate out of order
+	delivery, then this mode can allow for single stream datagram
+	performance that scales near linearly as interfaces are added
+	to the bond.
+
+	This mode requires the switch to have the appropriate ports
+	configured for "etherchannel" or "trunking."
+
+active-backup:
+	There is not much advantage in this network topology to
+	the active-backup mode, as the inactive backup devices are all
+	connected to the same peer as the primary.  In this case, a
+	load balancing mode (with link monitoring) will provide the
+	same level of network availability, but with increased
+	available bandwidth.  On the plus side, active-backup mode
+	does not require any configuration of the switch, so it may
+	have value if the hardware available does not support any of
+	the load balance modes.
+
+balance-xor:
+	This mode will limit traffic such that packets destined
+	for specific peers will always be sent over the same
+	interface.  Since the destination is determined by the MAC
+	addresses involved, this mode works best in a "local" network
+	configuration (as described above), with destinations all on
+	the same local network.  This mode is likely to be suboptimal
+	if all your traffic is passed through a single router (i.e., a
+	"gatewayed" network configuration, as described above).
+
+	As with balance-rr, the switch ports need to be configured for
+	"etherchannel" or "trunking."
+
+broadcast:
+	Like active-backup, there is not much advantage to this
+	mode in this type of network topology.
+
+802.3ad:
+	This mode can be a good choice for this type of network
+	topology.  The 802.3ad mode is an IEEE standard, so all peers
+	that implement 802.3ad should interoperate well.  The 802.3ad
+	protocol includes automatic configuration of the aggregates,
+	so minimal manual configuration of the switch is needed
+	(typically only to designate that some set of devices is
+	available for 802.3ad).  The 802.3ad standard also mandates
+	that frames be delivered in order (within certain limits), so
+	in general single connections will not see misordering of
+	packets.  The 802.3ad mode does have some drawbacks: the
+	standard mandates that all devices in the aggregate operate at
+	the same speed and duplex.  Also, as with all bonding load
+	balance modes other than balance-rr, no single connection will
+	be able to utilize more than a single interface's worth of
+	bandwidth.
+
+	Additionally, the linux bonding 802.3ad implementation
+	distributes traffic by peer (using an XOR of MAC addresses
+	and packet type ID), so in a "gatewayed" configuration, all
+	outgoing traffic will generally use the same device.  Incoming
+	traffic may also end up on a single device, but that is
+	dependent upon the balancing policy of the peer's 802.3ad
+	implementation.  In a "local" configuration, traffic will be
+	distributed across the devices in the bond.
+
+	Finally, the 802.3ad mode mandates the use of the MII monitor,
+	therefore, the ARP monitor is not available in this mode.
+
+balance-tlb:
+	The balance-tlb mode balances outgoing traffic by peer.
+	Since the balancing is done according to MAC address, in a
+	"gatewayed" configuration (as described above), this mode will
+	send all traffic across a single device.  However, in a
+	"local" network configuration, this mode balances multiple
+	local network peers across devices in a vaguely intelligent
+	manner (not a simple XOR as in balance-xor or 802.3ad mode),
+	so that mathematically unlucky MAC addresses (i.e., ones that
+	XOR to the same value) will not all "bunch up" on a single
+	interface.
+
+	Unlike 802.3ad, interfaces may be of differing speeds, and no
+	special switch configuration is required.  On the down side,
+	in this mode all incoming traffic arrives over a single
+	interface, this mode requires certain ethtool support in the
+	network device driver of the slave interfaces, and the ARP
+	monitor is not available.
+
+balance-alb:
+	This mode is everything that balance-tlb is, and more.
+	It has all of the features (and restrictions) of balance-tlb,
+	and will also balance incoming traffic from local network
+	peers (as described in the Bonding Module Options section,
+	above).
+
+	The only additional down side to this mode is that the network
+	device driver must support changing the hardware address while
+	the device is open.
+
+12.1.2 MT Link Monitoring for Single Switch Topology
+----------------------------------------------------
+
+The choice of link monitoring may largely depend upon which
+mode you choose to use.  The more advanced load balancing modes do not
+support the use of the ARP monitor, and are thus restricted to using
+the MII monitor (which does not provide as high a level of end to end
+assurance as the ARP monitor).
+
+12.2 Maximum Throughput in a Multiple Switch Topology
+-----------------------------------------------------
+
+Multiple switches may be utilized to optimize for throughput
+when they are configured in parallel as part of an isolated network
+between two or more systems, for example::
+
+		       +-----------+
+		       |  Host A   |
+		       +-+---+---+-+
+			 |   |   |
+		+--------+   |   +---------+
+		|            |             |
+	 +------+---+  +-----+----+  +-----+----+
+	 | Switch A |  | Switch B |  | Switch C |
+	 +------+---+  +-----+----+  +-----+----+
+		|            |             |
+		+--------+   |   +---------+
+			 |   |   |
+		       +-+---+---+-+
+		       |  Host B   |
+		       +-----------+
+
+In this configuration, the switches are isolated from one
+another.  One reason to employ a topology such as this is for an
+isolated network with many hosts (a cluster configured for high
+performance, for example), using multiple smaller switches can be more
+cost effective than a single larger switch, e.g., on a network with 24
+hosts, three 24 port switches can be significantly less expensive than
+a single 72 port switch.
+
+If access beyond the network is required, an individual host
+can be equipped with an additional network device connected to an
+external network; this host then additionally acts as a gateway.
+
+12.2.1 MT Bonding Mode Selection for Multiple Switch Topology
+-------------------------------------------------------------
+
+In actual practice, the bonding mode typically employed in
+configurations of this type is balance-rr.  Historically, in this
+network configuration, the usual caveats about out of order packet
+delivery are mitigated by the use of network adapters that do not do
+any kind of packet coalescing (via the use of NAPI, or because the
+device itself does not generate interrupts until some number of
+packets has arrived).  When employed in this fashion, the balance-rr
+mode allows individual connections between two hosts to effectively
+utilize greater than one interface's bandwidth.
+
+12.2.2 MT Link Monitoring for Multiple Switch Topology
+------------------------------------------------------
+
+Again, in actual practice, the MII monitor is most often used
+in this configuration, as performance is given preference over
+availability.  The ARP monitor will function in this topology, but its
+advantages over the MII monitor are mitigated by the volume of probes
+needed as the number of systems involved grows (remember that each
+host in the network is configured with bonding).
+
+13. Switch Behavior Issues
+==========================
+
+13.1 Link Establishment and Failover Delays
+-------------------------------------------
+
+Some switches exhibit undesirable behavior with regard to the
+timing of link up and down reporting by the switch.
+
+First, when a link comes up, some switches may indicate that
+the link is up (carrier available), but not pass traffic over the
+interface for some period of time.  This delay is typically due to
+some type of autonegotiation or routing protocol, but may also occur
+during switch initialization (e.g., during recovery after a switch
+failure).  If you find this to be a problem, specify an appropriate
+value to the updelay bonding module option to delay the use of the
+relevant interface(s).
+
+Second, some switches may "bounce" the link state one or more
+times while a link is changing state.  This occurs most commonly while
+the switch is initializing.  Again, an appropriate updelay value may
+help.
+
+Note that when a bonding interface has no active links, the
+driver will immediately reuse the first link that goes up, even if the
+updelay parameter has been specified (the updelay is ignored in this
+case).  If there are slave interfaces waiting for the updelay timeout
+to expire, the interface that first went into that state will be
+immediately reused.  This reduces down time of the network if the
+value of updelay has been overestimated, and since this occurs only in
+cases with no connectivity, there is no additional penalty for
+ignoring the updelay.
+
+In addition to the concerns about switch timings, if your
+switches take a long time to go into backup mode, it may be desirable
+to not activate a backup interface immediately after a link goes down.
+Failover may be delayed via the downdelay bonding module option.
+
+13.2 Duplicated Incoming Packets
+--------------------------------
+
+NOTE: Starting with version 3.0.2, the bonding driver has logic to
+suppress duplicate packets, which should largely eliminate this problem.
+The following description is kept for reference.
+
+It is not uncommon to observe a short burst of duplicated
+traffic when the bonding device is first used, or after it has been
+idle for some period of time.  This is most easily observed by issuing
+a "ping" to some other host on the network, and noticing that the
+output from ping flags duplicates (typically one per slave).
+
+For example, on a bond in active-backup mode with five slaves
+all connected to one switch, the output may appear as follows::
+
+	# ping -n 10.0.4.2
+	PING 10.0.4.2 (10.0.4.2) from 10.0.3.10 : 56(84) bytes of data.
+	64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.7 ms
+	64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+	64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+	64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+	64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+	64 bytes from 10.0.4.2: icmp_seq=2 ttl=64 time=0.216 ms
+	64 bytes from 10.0.4.2: icmp_seq=3 ttl=64 time=0.267 ms
+	64 bytes from 10.0.4.2: icmp_seq=4 ttl=64 time=0.222 ms
+
+This is not due to an error in the bonding driver, rather, it
+is a side effect of how many switches update their MAC forwarding
+tables.  Initially, the switch does not associate the MAC address in
+the packet with a particular switch port, and so it may send the
+traffic to all ports until its MAC forwarding table is updated.  Since
+the interfaces attached to the bond may occupy multiple ports on a
+single switch, when the switch (temporarily) floods the traffic to all
+ports, the bond device receives multiple copies of the same packet
+(one per slave device).
+
+The duplicated packet behavior is switch dependent, some
+switches exhibit this, and some do not.  On switches that display this
+behavior, it can be induced by clearing the MAC forwarding table (on
+most Cisco switches, the privileged command "clear mac address-table
+dynamic" will accomplish this).
+
+14. Hardware Specific Considerations
+====================================
+
+This section contains additional information for configuring
+bonding on specific hardware platforms, or for interfacing bonding
+with particular switches or other devices.
+
+14.1 IBM BladeCenter
+--------------------
+
+This applies to the JS20 and similar systems.
+
+On the JS20 blades, the bonding driver supports only
+balance-rr, active-backup, balance-tlb and balance-alb modes.  This is
+largely due to the network topology inside the BladeCenter, detailed
+below.
+
+JS20 network adapter information
+--------------------------------
+
+All JS20s come with two Broadcom Gigabit Ethernet ports
+integrated on the planar (that's "motherboard" in IBM-speak).  In the
+BladeCenter chassis, the eth0 port of all JS20 blades is hard wired to
+I/O Module #1; similarly, all eth1 ports are wired to I/O Module #2.
+An add-on Broadcom daughter card can be installed on a JS20 to provide
+two more Gigabit Ethernet ports.  These ports, eth2 and eth3, are
+wired to I/O Modules 3 and 4, respectively.
+
+Each I/O Module may contain either a switch or a passthrough
+module (which allows ports to be directly connected to an external
+switch).  Some bonding modes require a specific BladeCenter internal
+network topology in order to function; these are detailed below.
+
+Additional BladeCenter-specific networking information can be
+found in two IBM Redbooks (www.ibm.com/redbooks):
+
+- "IBM eServer BladeCenter Networking Options"
+- "IBM eServer BladeCenter Layer 2-7 Network Switching"
+
+BladeCenter networking configuration
+------------------------------------
+
+Because a BladeCenter can be configured in a very large number
+of ways, this discussion will be confined to describing basic
+configurations.
+
+Normally, Ethernet Switch Modules (ESMs) are used in I/O
+modules 1 and 2.  In this configuration, the eth0 and eth1 ports of a
+JS20 will be connected to different internal switches (in the
+respective I/O modules).
+
+A passthrough module (OPM or CPM, optical or copper,
+passthrough module) connects the I/O module directly to an external
+switch.  By using PMs in I/O module #1 and #2, the eth0 and eth1
+interfaces of a JS20 can be redirected to the outside world and
+connected to a common external switch.
+
+Depending upon the mix of ESMs and PMs, the network will
+appear to bonding as either a single switch topology (all PMs) or as a
+multiple switch topology (one or more ESMs, zero or more PMs).  It is
+also possible to connect ESMs together, resulting in a configuration
+much like the example in "High Availability in a Multiple Switch
+Topology," above.
+
+Requirements for specific modes
+-------------------------------
+
+The balance-rr mode requires the use of passthrough modules
+for devices in the bond, all connected to an common external switch.
+That switch must be configured for "etherchannel" or "trunking" on the
+appropriate ports, as is usual for balance-rr.
+
+The balance-alb and balance-tlb modes will function with
+either switch modules or passthrough modules (or a mix).  The only
+specific requirement for these modes is that all network interfaces
+must be able to reach all destinations for traffic sent over the
+bonding device (i.e., the network must converge at some point outside
+the BladeCenter).
+
+The active-backup mode has no additional requirements.
+
+Link monitoring issues
+----------------------
+
+When an Ethernet Switch Module is in place, only the ARP
+monitor will reliably detect link loss to an external switch.  This is
+nothing unusual, but examination of the BladeCenter cabinet would
+suggest that the "external" network ports are the ethernet ports for
+the system, when it fact there is a switch between these "external"
+ports and the devices on the JS20 system itself.  The MII monitor is
+only able to detect link failures between the ESM and the JS20 system.
+
+When a passthrough module is in place, the MII monitor does
+detect failures to the "external" port, which is then directly
+connected to the JS20 system.
+
+Other concerns
+--------------
+
+The Serial Over LAN (SoL) link is established over the primary
+ethernet (eth0) only, therefore, any loss of link to eth0 will result
+in losing your SoL connection.  It will not fail over with other
+network traffic, as the SoL system is beyond the control of the
+bonding driver.
+
+It may be desirable to disable spanning tree on the switch
+(either the internal Ethernet Switch Module, or an external switch) to
+avoid fail-over delay issues when using bonding.
+
+
+15. Frequently Asked Questions
+==============================
+
+1.  Is it SMP safe?
+-------------------
+
+Yes. The old 2.0.xx channel bonding patch was not SMP safe.
+The new driver was designed to be SMP safe from the start.
+
+2.  What type of cards will work with it?
+-----------------------------------------
+
+Any Ethernet type cards (you can even mix cards - a Intel
+EtherExpress PRO/100 and a 3com 3c905b, for example).  For most modes,
+devices need not be of the same speed.
+
+Starting with version 3.2.1, bonding also supports Infiniband
+slaves in active-backup mode.
+
+3.  How many bonding devices can I have?
+----------------------------------------
+
+There is no limit.
+
+4.  How many slaves can a bonding device have?
+----------------------------------------------
+
+This is limited only by the number of network interfaces Linux
+supports and/or the number of network cards you can place in your
+system.
+
+5.  What happens when a slave link dies?
+----------------------------------------
+
+If link monitoring is enabled, then the failing device will be
+disabled.  The active-backup mode will fail over to a backup link, and
+other modes will ignore the failed link.  The link will continue to be
+monitored, and should it recover, it will rejoin the bond (in whatever
+manner is appropriate for the mode). See the sections on High
+Availability and the documentation for each mode for additional
+information.
+
+Link monitoring can be enabled via either the miimon or
+arp_interval parameters (described in the module parameters section,
+above).  In general, miimon monitors the carrier state as sensed by
+the underlying network device, and the arp monitor (arp_interval)
+monitors connectivity to another host on the local network.
+
+If no link monitoring is configured, the bonding driver will
+be unable to detect link failures, and will assume that all links are
+always available.  This will likely result in lost packets, and a
+resulting degradation of performance.  The precise performance loss
+depends upon the bonding mode and network configuration.
+
+6.  Can bonding be used for High Availability?
+----------------------------------------------
+
+Yes.  See the section on High Availability for details.
+
+7.  Which switches/systems does it work with?
+---------------------------------------------
+
+The full answer to this depends upon the desired mode.
+
+In the basic balance modes (balance-rr and balance-xor), it
+works with any system that supports etherchannel (also called
+trunking).  Most managed switches currently available have such
+support, and many unmanaged switches as well.
+
+The advanced balance modes (balance-tlb and balance-alb) do
+not have special switch requirements, but do need device drivers that
+support specific features (described in the appropriate section under
+module parameters, above).
+
+In 802.3ad mode, it works with systems that support IEEE
+802.3ad Dynamic Link Aggregation.  Most managed and many unmanaged
+switches currently available support 802.3ad.
+
+The active-backup mode should work with any Layer-II switch.
+
+8.  Where does a bonding device get its MAC address from?
+---------------------------------------------------------
+
+When using slave devices that have fixed MAC addresses, or when
+the fail_over_mac option is enabled, the bonding device's MAC address is
+the MAC address of the active slave.
+
+For other configurations, if not explicitly configured (with
+ifconfig or ip link), the MAC address of the bonding device is taken from
+its first slave device.  This MAC address is then passed to all following
+slaves and remains persistent (even if the first slave is removed) until
+the bonding device is brought down or reconfigured.
+
+If you wish to change the MAC address, you can set it with
+ifconfig or ip link::
+
+	# ifconfig bond0 hw ether 00:11:22:33:44:55
+
+	# ip link set bond0 address 66:77:88:99:aa:bb
+
+The MAC address can be also changed by bringing down/up the
+device and then changing its slaves (or their order)::
+
+	# ifconfig bond0 down ; modprobe -r bonding
+	# ifconfig bond0 .... up
+	# ifenslave bond0 eth...
+
+This method will automatically take the address from the next
+slave that is added.
+
+To restore your slaves' MAC addresses, you need to detach them
+from the bond (``ifenslave -d bond0 eth0``). The bonding driver will
+then restore the MAC addresses that the slaves had before they were
+enslaved.
+
+16. Resources and Links
+=======================
+
+The latest version of the bonding driver can be found in the latest
+version of the linux kernel, found on http://kernel.org
+
+The latest version of this document can be found in the latest kernel
+source (named Documentation/networking/bonding.rst).
+
+Discussions regarding the usage of the bonding driver take place on the
+bonding-devel mailing list, hosted at sourceforge.net. If you have questions or
+problems, post them to the list.  The list address is:
+
+bonding-devel@lists.sourceforge.net
+
+The administrative interface (to subscribe or unsubscribe) can
+be found at:
+
+https://lists.sourceforge.net/lists/listinfo/bonding-devel
+
+Discussions regarding the development of the bonding driver take place
+on the main Linux network mailing list, hosted at vger.kernel.org. The list
+address is:
+
+netdev@vger.kernel.org
+
+The administrative interface (to subscribe or unsubscribe) can
+be found at:
+
+http://vger.kernel.org/vger-lists.html#netdev
+
+Donald Becker's Ethernet Drivers and diag programs may be found at :
+
+ - http://web.archive.org/web/%2E/http://www.scyld.com/network/
+
+You will also find a lot of information regarding Ethernet, NWay, MII,
+etc. at www.scyld.com.
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
deleted file mode 100644
index e3abfbd32f71..000000000000
--- a/Documentation/networking/bonding.txt
+++ /dev/null
@@ -1,2837 +0,0 @@
-
-		Linux Ethernet Bonding Driver HOWTO
-
-		Latest update: 27 April 2011
-
-Initial release : Thomas Davis <tadavis at lbl.gov>
-Corrections, HA extensions : 2000/10/03-15 :
-  - Willy Tarreau <willy at meta-x.org>
-  - Constantine Gavrilov <const-g at xpert.com>
-  - Chad N. Tindel <ctindel at ieee dot org>
-  - Janice Girouard <girouard at us dot ibm dot com>
-  - Jay Vosburgh <fubar at us dot ibm dot com>
-
-Reorganized and updated Feb 2005 by Jay Vosburgh
-Added Sysfs information: 2006/04/24
-  - Mitch Williams <mitch.a.williams at intel.com>
-
-Introduction
-============
-
-	The Linux bonding driver provides a method for aggregating
-multiple network interfaces into a single logical "bonded" interface.
-The behavior of the bonded interfaces depends upon the mode; generally
-speaking, modes provide either hot standby or load balancing services.
-Additionally, link integrity monitoring may be performed.
-	
-	The bonding driver originally came from Donald Becker's
-beowulf patches for kernel 2.0. It has changed quite a bit since, and
-the original tools from extreme-linux and beowulf sites will not work
-with this version of the driver.
-
-	For new versions of the driver, updated userspace tools, and
-who to ask for help, please follow the links at the end of this file.
-
-Table of Contents
-=================
-
-1. Bonding Driver Installation
-
-2. Bonding Driver Options
-
-3. Configuring Bonding Devices
-3.1	Configuration with Sysconfig Support
-3.1.1		Using DHCP with Sysconfig
-3.1.2		Configuring Multiple Bonds with Sysconfig
-3.2	Configuration with Initscripts Support
-3.2.1		Using DHCP with Initscripts
-3.2.2		Configuring Multiple Bonds with Initscripts
-3.3	Configuring Bonding Manually with Ifenslave
-3.3.1		Configuring Multiple Bonds Manually
-3.4	Configuring Bonding Manually via Sysfs
-3.5	Configuration with Interfaces Support
-3.6	Overriding Configuration for Special Cases
-3.7 Configuring LACP for 802.3ad mode in a more secure way
-
-4. Querying Bonding Configuration
-4.1	Bonding Configuration
-4.2	Network Configuration
-
-5. Switch Configuration
-
-6. 802.1q VLAN Support
-
-7. Link Monitoring
-7.1	ARP Monitor Operation
-7.2	Configuring Multiple ARP Targets
-7.3	MII Monitor Operation
-
-8. Potential Trouble Sources
-8.1	Adventures in Routing
-8.2	Ethernet Device Renaming
-8.3	Painfully Slow Or No Failed Link Detection By Miimon
-
-9. SNMP agents
-
-10. Promiscuous mode
-
-11. Configuring Bonding for High Availability
-11.1	High Availability in a Single Switch Topology
-11.2	High Availability in a Multiple Switch Topology
-11.2.1		HA Bonding Mode Selection for Multiple Switch Topology
-11.2.2		HA Link Monitoring for Multiple Switch Topology
-
-12. Configuring Bonding for Maximum Throughput
-12.1	Maximum Throughput in a Single Switch Topology
-12.1.1		MT Bonding Mode Selection for Single Switch Topology
-12.1.2		MT Link Monitoring for Single Switch Topology
-12.2	Maximum Throughput in a Multiple Switch Topology
-12.2.1		MT Bonding Mode Selection for Multiple Switch Topology
-12.2.2		MT Link Monitoring for Multiple Switch Topology
-
-13. Switch Behavior Issues
-13.1	Link Establishment and Failover Delays
-13.2	Duplicated Incoming Packets
-
-14. Hardware Specific Considerations
-14.1	IBM BladeCenter
-
-15. Frequently Asked Questions
-
-16. Resources and Links
-
-
-1. Bonding Driver Installation
-==============================
-
-	Most popular distro kernels ship with the bonding driver
-already available as a module. If your distro does not, or you
-have need to compile bonding from source (e.g., configuring and
-installing a mainline kernel from kernel.org), you'll need to perform
-the following steps:
-
-1.1 Configure and build the kernel with bonding
------------------------------------------------
-
-	The current version of the bonding driver is available in the
-drivers/net/bonding subdirectory of the most recent kernel source
-(which is available on http://kernel.org).  Most users "rolling their
-own" will want to use the most recent kernel from kernel.org.
-
-	Configure kernel with "make menuconfig" (or "make xconfig" or
-"make config"), then select "Bonding driver support" in the "Network
-device support" section.  It is recommended that you configure the
-driver as module since it is currently the only way to pass parameters
-to the driver or configure more than one bonding device.
-
-	Build and install the new kernel and modules.
-
-1.2 Bonding Control Utility
--------------------------------------
-
-	 It is recommended to configure bonding via iproute2 (netlink)
-or sysfs, the old ifenslave control utility is obsolete.
-
-2. Bonding Driver Options
-=========================
-
-	Options for the bonding driver are supplied as parameters to the
-bonding module at load time, or are specified via sysfs.
-
-	Module options may be given as command line arguments to the
-insmod or modprobe command, but are usually specified in either the
-/etc/modprobe.d/*.conf configuration files, or in a distro-specific
-configuration file (some of which are detailed in the next section).
-
-	Details on bonding support for sysfs is provided in the
-"Configuring Bonding Manually via Sysfs" section, below.
-
-	The available bonding driver parameters are listed below. If a
-parameter is not specified the default value is used.  When initially
-configuring a bond, it is recommended "tail -f /var/log/messages" be
-run in a separate window to watch for bonding driver error messages.
-
-	It is critical that either the miimon or arp_interval and
-arp_ip_target parameters be specified, otherwise serious network
-degradation will occur during link failures.  Very few devices do not
-support at least miimon, so there is really no reason not to use it.
-
-	Options with textual values will accept either the text name
-or, for backwards compatibility, the option value.  E.g.,
-"mode=802.3ad" and "mode=4" set the same mode.
-
-	The parameters are as follows:
-
-active_slave
-
-	Specifies the new active slave for modes that support it
-	(active-backup, balance-alb and balance-tlb).  Possible values
-	are the name of any currently enslaved interface, or an empty
-	string.  If a name is given, the slave and its link must be up in order
-	to be selected as the new active slave.  If an empty string is
-	specified, the current active slave is cleared, and a new active
-	slave is selected automatically.
-
-	Note that this is only available through the sysfs interface. No module
-	parameter by this name exists.
-
-	The normal value of this option is the name of the currently
-	active slave, or the empty string if there is no active slave or
-	the current mode does not use an active slave.
-
-ad_actor_sys_prio
-
-	In an AD system, this specifies the system priority. The allowed range
-	is 1 - 65535. If the value is not specified, it takes 65535 as the
-	default value.
-
-	This parameter has effect only in 802.3ad mode and is available through
-	SysFs interface.
-
-ad_actor_system
-
-	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
-
-	This parameter has effect only in 802.3ad mode and is available through
-	SysFs interface.
-
-ad_select
-
-	Specifies the 802.3ad aggregation selection logic to use.  The
-	possible values and their effects are:
-
-	stable or 0
-
-		The active aggregator is chosen by largest aggregate
-		bandwidth.
-
-		Reselection of the active aggregator occurs only when all
-		slaves of the active aggregator are down or the active
-		aggregator has no slaves.
-
-		This is the default value.
-
-	bandwidth or 1
-
-		The active aggregator is chosen by largest aggregate
-		bandwidth.  Reselection occurs if:
-
-		- A slave is added to or removed from the bond
-
-		- Any slave's link state changes
-
-		- Any slave's 802.3ad association state changes
-
-		- The bond's administrative state changes to up
-
-	count or 2
-
-		The active aggregator is chosen by the largest number of
-		ports (slaves).  Reselection occurs as described under the
-		"bandwidth" setting, above.
-
-	The bandwidth and count selection policies permit failover of
-	802.3ad aggregations when partial failure of the active aggregator
-	occurs.  This keeps the aggregator with the highest availability
-	(either in bandwidth or in number of ports) active at all times.
-
-	This option was added in bonding version 3.4.0.
-
-ad_user_port_key
-
-	In an AD system, the port-key has three parts as shown below -
-
-	   Bits   Use
-	   00     Duplex
-	   01-05  Speed
-	   06-15  User-defined
-
-	This defines the upper 10 bits of the port key. The values can be
-	from 0 - 1023. If not given, the system defaults to 0.
-
-	This parameter has effect only in 802.3ad mode and is available through
-	SysFs interface.
-
-all_slaves_active
-
-	Specifies that duplicate frames (received on inactive ports) should be
-	dropped (0) or delivered (1).
-
-	Normally, bonding will drop duplicate frames (received on inactive
-	ports), which is desirable for most users. But there are some times
-	it is nice to allow duplicate frames to be delivered.
-
-	The default value is 0 (drop duplicate frames received on inactive
-	ports).
-
-arp_interval
-
-	Specifies the ARP link monitoring frequency in milliseconds.
-
-	The ARP monitor works by periodically checking the slave
-	devices to determine whether they have sent or received
-	traffic recently (the precise criteria depends upon the
-	bonding mode, and the state of the slave).  Regular traffic is
-	generated via ARP probes issued for the addresses specified by
-	the arp_ip_target option.
-
-	This behavior can be modified by the arp_validate option,
-	below.
-
-	If ARP monitoring is used in an etherchannel compatible mode
-	(modes 0 and 2), the switch should be configured in a mode
-	that evenly distributes packets across all links. If the
-	switch is configured to distribute the packets in an XOR
-	fashion, all replies from the ARP targets will be received on
-	the same link which could cause the other team members to
-	fail.  ARP monitoring should not be used in conjunction with
-	miimon.  A value of 0 disables ARP monitoring.  The default
-	value is 0.
-
-arp_ip_target
-
-	Specifies the IP addresses to use as ARP monitoring peers when
-	arp_interval is > 0.  These are the targets of the ARP request
-	sent to determine the health of the link to the targets.
-	Specify these values in ddd.ddd.ddd.ddd format.  Multiple IP
-	addresses must be separated by a comma.  At least one IP
-	address must be given for ARP monitoring to function.  The
-	maximum number of targets that can be specified is 16.  The
-	default value is no IP addresses.
-
-arp_validate
-
-	Specifies whether or not ARP probes and replies should be
-	validated in any mode that supports arp monitoring, or whether
-	non-ARP traffic should be filtered (disregarded) for link
-	monitoring purposes.
-
-	Possible values are:
-
-	none or 0
-
-		No validation or filtering is performed.
-
-	active or 1
-
-		Validation is performed only for the active slave.
-
-	backup or 2
-
-		Validation is performed only for backup slaves.
-
-	all or 3
-
-		Validation is performed for all slaves.
-
-	filter or 4
-
-		Filtering is applied to all slaves. No validation is
-		performed.
-
-	filter_active or 5
-
-		Filtering is applied to all slaves, validation is performed
-		only for the active slave.
-
-	filter_backup or 6
-
-		Filtering is applied to all slaves, validation is performed
-		only for backup slaves.
-
-	Validation:
-
-	Enabling validation causes the ARP monitor to examine the incoming
-	ARP requests and replies, and only consider a slave to be up if it
-	is receiving the appropriate ARP traffic.
-
-	For an active slave, the validation checks ARP replies to confirm
-	that they were generated by an arp_ip_target.  Since backup slaves
-	do not typically receive these replies, the validation performed
-	for backup slaves is on the broadcast ARP request sent out via the
-	active slave.  It is possible that some switch or network
-	configurations may result in situations wherein the backup slaves
-	do not receive the ARP requests; in such a situation, validation
-	of backup slaves must be disabled.
-
-	The validation of ARP requests on backup slaves is mainly helping
-	bonding to decide which slaves are more likely to work in case of
-	the active slave failure, it doesn't really guarantee that the
-	backup slave will work if it's selected as the next active slave.
-
-	Validation is useful in network configurations in which multiple
-	bonding hosts are concurrently issuing ARPs to one or more targets
-	beyond a common switch.  Should the link between the switch and
-	target fail (but not the switch itself), the probe traffic
-	generated by the multiple bonding instances will fool the standard
-	ARP monitor into considering the links as still up.  Use of
-	validation can resolve this, as the ARP monitor will only consider
-	ARP requests and replies associated with its own instance of
-	bonding.
-
-	Filtering:
-
-	Enabling filtering causes the ARP monitor to only use incoming ARP
-	packets for link availability purposes.  Arriving packets that are
-	not ARPs are delivered normally, but do not count when determining
-	if a slave is available.
-
-	Filtering operates by only considering the reception of ARP
-	packets (any ARP packet, regardless of source or destination) when
-	determining if a slave has received traffic for link availability
-	purposes.
-
-	Filtering is useful in network configurations in which significant
-	levels of third party broadcast traffic would fool the standard
-	ARP monitor into considering the links as still up.  Use of
-	filtering can resolve this, as only ARP traffic is considered for
-	link availability purposes.
-
-	This option was added in bonding version 3.1.0.
-
-arp_all_targets
-
-	Specifies the quantity of arp_ip_targets that must be reachable
-	in order for the ARP monitor to consider a slave as being up.
-	This option affects only active-backup mode for slaves with
-	arp_validation enabled.
-
-	Possible values are:
-
-	any or 0
-
-		consider the slave up only when any of the arp_ip_targets
-		is reachable
-
-	all or 1
-
-		consider the slave up only when all of the arp_ip_targets
-		are reachable
-
-downdelay
-
-	Specifies the time, in milliseconds, to wait before disabling
-	a slave after a link failure has been detected.  This option
-	is only valid for the miimon link monitor.  The downdelay
-	value should be a multiple of the miimon value; if not, it
-	will be rounded down to the nearest multiple.  The default
-	value is 0.
-
-fail_over_mac
-
-	Specifies whether active-backup mode should set all slaves to
-	the same MAC address at enslavement (the traditional
-	behavior), or, when enabled, perform special handling of the
-	bond's MAC address in accordance with the selected policy.
-
-	Possible values are:
-
-	none or 0
-
-		This setting disables fail_over_mac, and causes
-		bonding to set all slaves of an active-backup bond to
-		the same MAC address at enslavement time.  This is the
-		default.
-
-	active or 1
-
-		The "active" fail_over_mac policy indicates that the
-		MAC address of the bond should always be the MAC
-		address of the currently active slave.  The MAC
-		address of the slaves is not changed; instead, the MAC
-		address of the bond changes during a failover.
-
-		This policy is useful for devices that cannot ever
-		alter their MAC address, or for devices that refuse
-		incoming broadcasts with their own source MAC (which
-		interferes with the ARP monitor).
-
-		The down side of this policy is that every device on
-		the network must be updated via gratuitous ARP,
-		vs. just updating a switch or set of switches (which
-		often takes place for any traffic, not just ARP
-		traffic, if the switch snoops incoming traffic to
-		update its tables) for the traditional method.  If the
-		gratuitous ARP is lost, communication may be
-		disrupted.
-
-		When this policy is used in conjunction with the mii
-		monitor, devices which assert link up prior to being
-		able to actually transmit and receive are particularly
-		susceptible to loss of the gratuitous ARP, and an
-		appropriate updelay setting may be required.
-
-	follow or 2
-
-		The "follow" fail_over_mac policy causes the MAC
-		address of the bond to be selected normally (normally
-		the MAC address of the first slave added to the bond).
-		However, the second and subsequent slaves are not set
-		to this MAC address while they are in a backup role; a
-		slave is programmed with the bond's MAC address at
-		failover time (and the formerly active slave receives
-		the newly active slave's MAC address).
-
-		This policy is useful for multiport devices that
-		either become confused or incur a performance penalty
-		when multiple ports are programmed with the same MAC
-		address.
-
-
-	The default policy is none, unless the first slave cannot
-	change its MAC address, in which case the active policy is
-	selected by default.
-
-	This option may be modified via sysfs only when no slaves are
-	present in the bond.
-
-	This option was added in bonding version 3.2.0.  The "follow"
-	policy was added in bonding version 3.3.0.
-
-lacp_rate
-
-	Option specifying the rate in which we'll ask our link partner
-	to transmit LACPDU packets in 802.3ad mode.  Possible values
-	are:
-
-	slow or 0
-		Request partner to transmit LACPDUs every 30 seconds
-
-	fast or 1
-		Request partner to transmit LACPDUs every 1 second
-
-	The default is slow.
-
-max_bonds
-
-	Specifies the number of bonding devices to create for this
-	instance of the bonding driver.  E.g., if max_bonds is 3, and
-	the bonding driver is not already loaded, then bond0, bond1
-	and bond2 will be created.  The default value is 1.  Specifying
-	a value of 0 will load bonding, but will not create any devices.
-
-miimon
-
-	Specifies the MII link monitoring frequency in milliseconds.
-	This determines how often the link state of each slave is
-	inspected for link failures.  A value of zero disables MII
-	link monitoring.  A value of 100 is a good starting point.
-	The use_carrier option, below, affects how the link state is
-	determined.  See the High Availability section for additional
-	information.  The default value is 0.
-
-min_links
-
-	Specifies the minimum number of links that must be active before
-	asserting carrier. It is similar to the Cisco EtherChannel min-links
-	feature. This allows setting the minimum number of member ports that
-	must be up (link-up state) before marking the bond device as up
-	(carrier on). This is useful for situations where higher level services
-	such as clustering want to ensure a minimum number of low bandwidth
-	links are active before switchover. This option only affect 802.3ad
-	mode.
-
-	The default value is 0. This will cause carrier to be asserted (for
-	802.3ad mode) whenever there is an active aggregator, regardless of the
-	number of available links in that aggregator. Note that, because an
-	aggregator cannot be active without at least one available link,
-	setting this option to 0 or to 1 has the exact same effect.
-
-mode
-
-	Specifies one of the bonding policies. The default is
-	balance-rr (round robin).  Possible values are:
-
-	balance-rr or 0
-
-		Round-robin policy: Transmit packets in sequential
-		order from the first available slave through the
-		last.  This mode provides load balancing and fault
-		tolerance.
-
-	active-backup or 1
-
-		Active-backup policy: Only one slave in the bond is
-		active.  A different slave becomes active if, and only
-		if, the active slave fails.  The bond's MAC address is
-		externally visible on only one port (network adapter)
-		to avoid confusing the switch.
-
-		In bonding version 2.6.2 or later, when a failover
-		occurs in active-backup mode, bonding will issue one
-		or more gratuitous ARPs on the newly active slave.
-		One gratuitous ARP is issued for the bonding master
-		interface and each VLAN interfaces configured above
-		it, provided that the interface has at least one IP
-		address configured.  Gratuitous ARPs issued for VLAN
-		interfaces are tagged with the appropriate VLAN id.
-
-		This mode provides fault tolerance.  The primary
-		option, documented below, affects the behavior of this
-		mode.
-
-	balance-xor or 2
-
-		XOR policy: Transmit based on the selected transmit
-		hash policy.  The default policy is a simple [(source
-		MAC address XOR'd with destination MAC address XOR
-		packet type ID) modulo slave count].  Alternate transmit
-		policies may be	selected via the xmit_hash_policy option,
-		described below.
-
-		This mode provides load balancing and fault tolerance.
-
-	broadcast or 3
-
-		Broadcast policy: transmits everything on all slave
-		interfaces.  This mode provides fault tolerance.
-
-	802.3ad or 4
-
-		IEEE 802.3ad Dynamic link aggregation.  Creates
-		aggregation groups that share the same speed and
-		duplex settings.  Utilizes all slaves in the active
-		aggregator according to the 802.3ad specification.
-
-		Slave selection for outgoing traffic is done according
-		to the transmit hash policy, which may be changed from
-		the default simple XOR policy via the xmit_hash_policy
-		option, documented below.  Note that not all transmit
-		policies may be 802.3ad compliant, particularly in
-		regards to the packet mis-ordering requirements of
-		section 43.2.4 of the 802.3ad standard.  Differing
-		peer implementations will have varying tolerances for
-		noncompliance.
-
-		Prerequisites:
-
-		1. Ethtool support in the base drivers for retrieving
-		the speed and duplex of each slave.
-
-		2. A switch that supports IEEE 802.3ad Dynamic link
-		aggregation.
-
-		Most switches will require some type of configuration
-		to enable 802.3ad mode.
-
-	balance-tlb or 5
-
-		Adaptive transmit load balancing: channel bonding that
-		does not require any special switch support.
-
-		In tlb_dynamic_lb=1 mode; the outgoing traffic is
-		distributed according to the current load (computed
-		relative to the speed) on each slave.
-
-		In tlb_dynamic_lb=0 mode; the load balancing based on
-		current load is disabled and the load is distributed
-		only using the hash distribution.
-
-		Incoming traffic is received by the current slave.
-		If the receiving slave fails, another slave takes over
-		the MAC address of the failed receiving slave.
-
-		Prerequisite:
-
-		Ethtool support in the base drivers for retrieving the
-		speed of each slave.
-
-	balance-alb or 6
-
-		Adaptive load balancing: includes balance-tlb plus
-		receive load balancing (rlb) for IPV4 traffic, and
-		does not require any special switch support.  The
-		receive load balancing is achieved by ARP negotiation.
-		The bonding driver intercepts the ARP Replies sent by
-		the local system on their way out and overwrites the
-		source hardware address with the unique hardware
-		address of one of the slaves in the bond such that
-		different peers use different hardware addresses for
-		the server.
-
-		Receive traffic from connections created by the server
-		is also balanced.  When the local system sends an ARP
-		Request the bonding driver copies and saves the peer's
-		IP information from the ARP packet.  When the ARP
-		Reply arrives from the peer, its hardware address is
-		retrieved and the bonding driver initiates an ARP
-		reply to this peer assigning it to one of the slaves
-		in the bond.  A problematic outcome of using ARP
-		negotiation for balancing is that each time that an
-		ARP request is broadcast it uses the hardware address
-		of the bond.  Hence, peers learn the hardware address
-		of the bond and the balancing of receive traffic
-		collapses to the current slave.  This is handled by
-		sending updates (ARP Replies) to all the peers with
-		their individually assigned hardware address such that
-		the traffic is redistributed.  Receive traffic is also
-		redistributed when a new slave is added to the bond
-		and when an inactive slave is re-activated.  The
-		receive load is distributed sequentially (round robin)
-		among the group of highest speed slaves in the bond.
-
-		When a link is reconnected or a new slave joins the
-		bond the receive traffic is redistributed among all
-		active slaves in the bond by initiating ARP Replies
-		with the selected MAC address to each of the
-		clients. The updelay parameter (detailed below) must
-		be set to a value equal or greater than the switch's
-		forwarding delay so that the ARP Replies sent to the
-		peers will not be blocked by the switch.
-
-		Prerequisites:
-
-		1. Ethtool support in the base drivers for retrieving
-		the speed of each slave.
-
-		2. Base driver support for setting the hardware
-		address of a device while it is open.  This is
-		required so that there will always be one slave in the
-		team using the bond hardware address (the
-		curr_active_slave) while having a unique hardware
-		address for each slave in the bond.  If the
-		curr_active_slave fails its hardware address is
-		swapped with the new curr_active_slave that was
-		chosen.
-
-num_grat_arp
-num_unsol_na
-
-	Specify the number of peer notifications (gratuitous ARPs and
-	unsolicited IPv6 Neighbor Advertisements) to be issued after a
-	failover event.  As soon as the link is up on the new slave
-	(possibly immediately) a peer notification is sent on the
-	bonding device and each VLAN sub-device. This is repeated at
-	the rate specified by peer_notif_delay if the number is
-	greater than 1.
-
-	The valid range is 0 - 255; the default value is 1.  These options
-	affect only the active-backup mode.  These options were added for
-	bonding versions 3.3.0 and 3.4.0 respectively.
-
-	From Linux 3.0 and bonding version 3.7.1, these notifications
-	are generated by the ipv4 and ipv6 code and the numbers of
-	repetitions cannot be set independently.
-
-packets_per_slave
-
-	Specify the number of packets to transmit through a slave before
-	moving to the next one. When set to 0 then a slave is chosen at
-	random.
-
-	The valid range is 0 - 65535; the default value is 1. This option
-	has effect only in balance-rr mode.
-
-peer_notif_delay
-
-        Specify the delay, in milliseconds, between each peer
-        notification (gratuitous ARP and unsolicited IPv6 Neighbor
-        Advertisement) when they are issued after a failover event.
-        This delay should be a multiple of the link monitor interval
-        (arp_interval or miimon, whichever is active). The default
-        value is 0 which means to match the value of the link monitor
-        interval.
-
-primary
-
-	A string (eth0, eth2, etc) specifying which slave is the
-	primary device.  The specified device will always be the
-	active slave while it is available.  Only when the primary is
-	off-line will alternate devices be used.  This is useful when
-	one slave is preferred over another, e.g., when one slave has
-	higher throughput than another.
-
-	The primary option is only valid for active-backup(1),
-	balance-tlb (5) and balance-alb (6) mode.
-
-primary_reselect
-
-	Specifies the reselection policy for the primary slave.  This
-	affects how the primary slave is chosen to become the active slave
-	when failure of the active slave or recovery of the primary slave
-	occurs.  This option is designed to prevent flip-flopping between
-	the primary slave and other slaves.  Possible values are:
-
-	always or 0 (default)
-
-		The primary slave becomes the active slave whenever it
-		comes back up.
-
-	better or 1
-
-		The primary slave becomes the active slave when it comes
-		back up, if the speed and duplex of the primary slave is
-		better than the speed and duplex of the current active
-		slave.
-
-	failure or 2
-
-		The primary slave becomes the active slave only if the
-		current active slave fails and the primary slave is up.
-
-	The primary_reselect setting is ignored in two cases:
-
-		If no slaves are active, the first slave to recover is
-		made the active slave.
-
-		When initially enslaved, the primary slave is always made
-		the active slave.
-
-	Changing the primary_reselect policy via sysfs will cause an
-	immediate selection of the best active slave according to the new
-	policy.  This may or may not result in a change of the active
-	slave, depending upon the circumstances.
-
-	This option was added for bonding version 3.6.0.
-
-tlb_dynamic_lb
-
-	Specifies if dynamic shuffling of flows is enabled in tlb
-	mode. The value has no effect on any other modes.
-
-	The default behavior of tlb mode is to shuffle active flows across
-	slaves based on the load in that interval. This gives nice lb
-	characteristics but can cause packet reordering. If re-ordering is
-	a concern use this variable to disable flow shuffling and rely on
-	load balancing provided solely by the hash distribution.
-	xmit-hash-policy can be used to select the appropriate hashing for
-	the setup.
-
-	The sysfs entry can be used to change the setting per bond device
-	and the initial value is derived from the module parameter. The
-	sysfs entry is allowed to be changed only if the bond device is
-	down.
-
-	The default value is "1" that enables flow shuffling while value "0"
-	disables it. This option was added in bonding driver 3.7.1
-
-
-updelay
-
-	Specifies the time, in milliseconds, to wait before enabling a
-	slave after a link recovery has been detected.  This option is
-	only valid for the miimon link monitor.  The updelay value
-	should be a multiple of the miimon value; if not, it will be
-	rounded down to the nearest multiple.  The default value is 0.
-
-use_carrier
-
-	Specifies whether or not miimon should use MII or ETHTOOL
-	ioctls vs. netif_carrier_ok() to determine the link
-	status. The MII or ETHTOOL ioctls are less efficient and
-	utilize a deprecated calling sequence within the kernel.  The
-	netif_carrier_ok() relies on the device driver to maintain its
-	state with netif_carrier_on/off; at this writing, most, but
-	not all, device drivers support this facility.
-
-	If bonding insists that the link is up when it should not be,
-	it may be that your network device driver does not support
-	netif_carrier_on/off.  The default state for netif_carrier is
-	"carrier on," so if a driver does not support netif_carrier,
-	it will appear as if the link is always up.  In this case,
-	setting use_carrier to 0 will cause bonding to revert to the
-	MII / ETHTOOL ioctl method to determine the link state.
-
-	A value of 1 enables the use of netif_carrier_ok(), a value of
-	0 will use the deprecated MII / ETHTOOL ioctls.  The default
-	value is 1.
-
-xmit_hash_policy
-
-	Selects the transmit hash policy to use for slave selection in
-	balance-xor, 802.3ad, and tlb modes.  Possible values are:
-
-	layer2
-
-		Uses XOR of hardware MAC addresses and packet type ID
-		field to generate the hash. The formula is
-
-		hash = source MAC XOR destination MAC XOR packet type ID
-		slave number = hash modulo slave count
-
-		This algorithm will place all traffic to a particular
-		network peer on the same slave.
-
-		This algorithm is 802.3ad compliant.
-
-	layer2+3
-
-		This policy uses a combination of layer2 and layer3
-		protocol information to generate the hash.
-
-		Uses XOR of hardware MAC addresses and IP addresses to
-		generate the hash.  The formula is
-
-		hash = source MAC XOR destination MAC XOR packet type ID
-		hash = hash XOR source IP XOR destination IP
-		hash = hash XOR (hash RSHIFT 16)
-		hash = hash XOR (hash RSHIFT 8)
-		And then hash is reduced modulo slave count.
-
-		If the protocol is IPv6 then the source and destination
-		addresses are first hashed using ipv6_addr_hash.
-
-		This algorithm will place all traffic to a particular
-		network peer on the same slave.  For non-IP traffic,
-		the formula is the same as for the layer2 transmit
-		hash policy.
-
-		This policy is intended to provide a more balanced
-		distribution of traffic than layer2 alone, especially
-		in environments where a layer3 gateway device is
-		required to reach most destinations.
-
-		This algorithm is 802.3ad compliant.
-
-	layer3+4
-
-		This policy uses upper layer protocol information,
-		when available, to generate the hash.  This allows for
-		traffic to a particular network peer to span multiple
-		slaves, although a single connection will not span
-		multiple slaves.
-
-		The formula for unfragmented TCP and UDP packets is
-
-		hash = source port, destination port (as in the header)
-		hash = hash XOR source IP XOR destination IP
-		hash = hash XOR (hash RSHIFT 16)
-		hash = hash XOR (hash RSHIFT 8)
-		And then hash is reduced modulo slave count.
-
-		If the protocol is IPv6 then the source and destination
-		addresses are first hashed using ipv6_addr_hash.
-
-		For fragmented TCP or UDP packets and all other IPv4 and
-		IPv6 protocol traffic, the source and destination port
-		information is omitted.  For non-IP traffic, the
-		formula is the same as for the layer2 transmit hash
-		policy.
-
-		This algorithm is not fully 802.3ad compliant.  A
-		single TCP or UDP conversation containing both
-		fragmented and unfragmented packets will see packets
-		striped across two interfaces.  This may result in out
-		of order delivery.  Most traffic types will not meet
-		this criteria, as TCP rarely fragments traffic, and
-		most UDP traffic is not involved in extended
-		conversations.  Other implementations of 802.3ad may
-		or may not tolerate this noncompliance.
-
-	encap2+3
-
-		This policy uses the same formula as layer2+3 but it
-		relies on skb_flow_dissect to obtain the header fields
-		which might result in the use of inner headers if an
-		encapsulation protocol is used. For example this will
-		improve the performance for tunnel users because the
-		packets will be distributed according to the encapsulated
-		flows.
-
-	encap3+4
-
-		This policy uses the same formula as layer3+4 but it
-		relies on skb_flow_dissect to obtain the header fields
-		which might result in the use of inner headers if an
-		encapsulation protocol is used. For example this will
-		improve the performance for tunnel users because the
-		packets will be distributed according to the encapsulated
-		flows.
-
-	The default value is layer2.  This option was added in bonding
-	version 2.6.3.  In earlier versions of bonding, this parameter
-	does not exist, and the layer2 policy is the only policy.  The
-	layer2+3 value was added for bonding version 3.2.2.
-
-resend_igmp
-
-	Specifies the number of IGMP membership reports to be issued after
-	a failover event. One membership report is issued immediately after
-	the failover, subsequent packets are sent in each 200ms interval.
-
-	The valid range is 0 - 255; the default value is 1. A value of 0
-	prevents the IGMP membership report from being issued in response
-	to the failover event.
-
-	This option is useful for bonding modes balance-rr (0), active-backup
-	(1), balance-tlb (5) and balance-alb (6), in which a failover can
-	switch the IGMP traffic from one slave to another.  Therefore a fresh
-	IGMP report must be issued to cause the switch to forward the incoming
-	IGMP traffic over the newly selected slave.
-
-	This option was added for bonding version 3.7.0.
-
-lp_interval
-
-	Specifies the number of seconds between instances where the bonding
-	driver sends learning packets to each slaves peer switch.
-
-	The valid range is 1 - 0x7fffffff; the default value is 1. This Option
-	has effect only in balance-tlb and balance-alb modes.
-
-3. Configuring Bonding Devices
-==============================
-
-	You can configure bonding using either your distro's network
-initialization scripts, or manually using either iproute2 or the
-sysfs interface.  Distros generally use one of three packages for the
-network initialization scripts: initscripts, sysconfig or interfaces.
-Recent versions of these packages have support for bonding, while older
-versions do not.
-
-	We will first describe the options for configuring bonding for
-distros using versions of initscripts, sysconfig and interfaces with full
-or partial support for bonding, then provide information on enabling
-bonding without support from the network initialization scripts (i.e.,
-older versions of initscripts or sysconfig).
-
-	If you're unsure whether your distro uses sysconfig,
-initscripts or interfaces, or don't know if it's new enough, have no fear.
-Determining this is fairly straightforward.
-
-	First, look for a file called interfaces in /etc/network directory.
-If this file is present in your system, then your system use interfaces. See
-Configuration with Interfaces Support.
-
-	Else, issue the command:
-
-$ rpm -qf /sbin/ifup
-
-	It will respond with a line of text starting with either
-"initscripts" or "sysconfig," followed by some numbers.  This is the
-package that provides your network initialization scripts.
-
-	Next, to determine if your installation supports bonding,
-issue the command:
-
-$ grep ifenslave /sbin/ifup
-
-	If this returns any matches, then your initscripts or
-sysconfig has support for bonding.
-
-3.1 Configuration with Sysconfig Support
-----------------------------------------
-
-	This section applies to distros using a version of sysconfig
-with bonding support, for example, SuSE Linux Enterprise Server 9.
-
-	SuSE SLES 9's networking configuration system does support
-bonding, however, at this writing, the YaST system configuration
-front end does not provide any means to work with bonding devices.
-Bonding devices can be managed by hand, however, as follows.
-
-	First, if they have not already been configured, configure the
-slave devices.  On SLES 9, this is most easily done by running the
-yast2 sysconfig configuration utility.  The goal is for to create an
-ifcfg-id file for each slave device.  The simplest way to accomplish
-this is to configure the devices for DHCP (this is only to get the
-file ifcfg-id file created; see below for some issues with DHCP).  The
-name of the configuration file for each device will be of the form:
-
-ifcfg-id-xx:xx:xx:xx:xx:xx
-
-	Where the "xx" portion will be replaced with the digits from
-the device's permanent MAC address.
-
-	Once the set of ifcfg-id-xx:xx:xx:xx:xx:xx files has been
-created, it is necessary to edit the configuration files for the slave
-devices (the MAC addresses correspond to those of the slave devices).
-Before editing, the file will contain multiple lines, and will look
-something like this:
-
-BOOTPROTO='dhcp'
-STARTMODE='on'
-USERCTL='no'
-UNIQUE='XNzu.WeZGOGF+4wE'
-_nm_name='bus-pci-0001:61:01.0'
-
-	Change the BOOTPROTO and STARTMODE lines to the following:
-
-BOOTPROTO='none'
-STARTMODE='off'
-
-	Do not alter the UNIQUE or _nm_name lines.  Remove any other
-lines (USERCTL, etc).
-
-	Once the ifcfg-id-xx:xx:xx:xx:xx:xx files have been modified,
-it's time to create the configuration file for the bonding device
-itself.  This file is named ifcfg-bondX, where X is the number of the
-bonding device to create, starting at 0.  The first such file is
-ifcfg-bond0, the second is ifcfg-bond1, and so on.  The sysconfig
-network configuration system will correctly start multiple instances
-of bonding.
-
-	The contents of the ifcfg-bondX file is as follows:
-
-BOOTPROTO="static"
-BROADCAST="10.0.2.255"
-IPADDR="10.0.2.10"
-NETMASK="255.255.0.0"
-NETWORK="10.0.2.0"
-REMOTE_IPADDR=""
-STARTMODE="onboot"
-BONDING_MASTER="yes"
-BONDING_MODULE_OPTS="mode=active-backup miimon=100"
-BONDING_SLAVE0="eth0"
-BONDING_SLAVE1="bus-pci-0000:06:08.1"
-
-	Replace the sample BROADCAST, IPADDR, NETMASK and NETWORK
-values with the appropriate values for your network.
-
-	The STARTMODE specifies when the device is brought online.
-The possible values are:
-
-	onboot:	 The device is started at boot time.  If you're not
-		 sure, this is probably what you want.
-
-	manual:	 The device is started only when ifup is called
-		 manually.  Bonding devices may be configured this
-		 way if you do not wish them to start automatically
-		 at boot for some reason.
-
-	hotplug: The device is started by a hotplug event.  This is not
-		 a valid choice for a bonding device.
-
-	off or ignore: The device configuration is ignored.
-
-	The line BONDING_MASTER='yes' indicates that the device is a
-bonding master device.  The only useful value is "yes."
-
-	The contents of BONDING_MODULE_OPTS are supplied to the
-instance of the bonding module for this device.  Specify the options
-for the bonding mode, link monitoring, and so on here.  Do not include
-the max_bonds bonding parameter; this will confuse the configuration
-system if you have multiple bonding devices.
-
-	Finally, supply one BONDING_SLAVEn="slave device" for each
-slave.  where "n" is an increasing value, one for each slave.  The
-"slave device" is either an interface name, e.g., "eth0", or a device
-specifier for the network device.  The interface name is easier to
-find, but the ethN names are subject to change at boot time if, e.g.,
-a device early in the sequence has failed.  The device specifiers
-(bus-pci-0000:06:08.1 in the example above) specify the physical
-network device, and will not change unless the device's bus location
-changes (for example, it is moved from one PCI slot to another).  The
-example above uses one of each type for demonstration purposes; most
-configurations will choose one or the other for all slave devices.
-
-	When all configuration files have been modified or created,
-networking must be restarted for the configuration changes to take
-effect.  This can be accomplished via the following:
-
-# /etc/init.d/network restart
-
-	Note that the network control script (/sbin/ifdown) will
-remove the bonding module as part of the network shutdown processing,
-so it is not necessary to remove the module by hand if, e.g., the
-module parameters have changed.
-
-	Also, at this writing, YaST/YaST2 will not manage bonding
-devices (they do not show bonding interfaces on its list of network
-devices).  It is necessary to edit the configuration file by hand to
-change the bonding configuration.
-
-	Additional general options and details of the ifcfg file
-format can be found in an example ifcfg template file:
-
-/etc/sysconfig/network/ifcfg.template
-
-	Note that the template does not document the various BONDING_
-settings described above, but does describe many of the other options.
-
-3.1.1 Using DHCP with Sysconfig
--------------------------------
-
-	Under sysconfig, configuring a device with BOOTPROTO='dhcp'
-will cause it to query DHCP for its IP address information.  At this
-writing, this does not function for bonding devices; the scripts
-attempt to obtain the device address from DHCP prior to adding any of
-the slave devices.  Without active slaves, the DHCP requests are not
-sent to the network.
-
-3.1.2 Configuring Multiple Bonds with Sysconfig
------------------------------------------------
-
-	The sysconfig network initialization system is capable of
-handling multiple bonding devices.  All that is necessary is for each
-bonding instance to have an appropriately configured ifcfg-bondX file
-(as described above).  Do not specify the "max_bonds" parameter to any
-instance of bonding, as this will confuse sysconfig.  If you require
-multiple bonding devices with identical parameters, create multiple
-ifcfg-bondX files.
-
-	Because the sysconfig scripts supply the bonding module
-options in the ifcfg-bondX file, it is not necessary to add them to
-the system /etc/modules.d/*.conf configuration files.
-
-3.2 Configuration with Initscripts Support
-------------------------------------------
-
-	This section applies to distros using a recent version of
-initscripts with bonding support, for example, Red Hat Enterprise Linux
-version 3 or later, Fedora, etc.  On these systems, the network
-initialization scripts have knowledge of bonding, and can be configured to
-control bonding devices.  Note that older versions of the initscripts
-package have lower levels of support for bonding; this will be noted where
-applicable.
-
-	These distros will not automatically load the network adapter
-driver unless the ethX device is configured with an IP address.
-Because of this constraint, users must manually configure a
-network-script file for all physical adapters that will be members of
-a bondX link.  Network script files are located in the directory:
-
-/etc/sysconfig/network-scripts
-
-	The file name must be prefixed with "ifcfg-eth" and suffixed
-with the adapter's physical adapter number.  For example, the script
-for eth0 would be named /etc/sysconfig/network-scripts/ifcfg-eth0.
-Place the following text in the file:
-
-DEVICE=eth0
-USERCTL=no
-ONBOOT=yes
-MASTER=bond0
-SLAVE=yes
-BOOTPROTO=none
-
-	The DEVICE= line will be different for every ethX device and
-must correspond with the name of the file, i.e., ifcfg-eth1 must have
-a device line of DEVICE=eth1.  The setting of the MASTER= line will
-also depend on the final bonding interface name chosen for your bond.
-As with other network devices, these typically start at 0, and go up
-one for each device, i.e., the first bonding instance is bond0, the
-second is bond1, and so on.
-
-	Next, create a bond network script.  The file name for this
-script will be /etc/sysconfig/network-scripts/ifcfg-bondX where X is
-the number of the bond.  For bond0 the file is named "ifcfg-bond0",
-for bond1 it is named "ifcfg-bond1", and so on.  Within that file,
-place the following text:
-
-DEVICE=bond0
-IPADDR=192.168.1.1
-NETMASK=255.255.255.0
-NETWORK=192.168.1.0
-BROADCAST=192.168.1.255
-ONBOOT=yes
-BOOTPROTO=none
-USERCTL=no
-
-	Be sure to change the networking specific lines (IPADDR,
-NETMASK, NETWORK and BROADCAST) to match your network configuration.
-
-	For later versions of initscripts, such as that found with Fedora
-7 (or later) and Red Hat Enterprise Linux version 5 (or later), it is possible,
-and, indeed, preferable, to specify the bonding options in the ifcfg-bond0
-file, e.g. a line of the format:
-
-BONDING_OPTS="mode=active-backup arp_interval=60 arp_ip_target=192.168.1.254"
-
-	will configure the bond with the specified options.  The options
-specified in BONDING_OPTS are identical to the bonding module parameters
-except for the arp_ip_target field when using versions of initscripts older
-than and 8.57 (Fedora 8) and 8.45.19 (Red Hat Enterprise Linux 5.2).  When
-using older versions each target should be included as a separate option and
-should be preceded by a '+' to indicate it should be added to the list of
-queried targets, e.g.,
-
-	arp_ip_target=+192.168.1.1 arp_ip_target=+192.168.1.2
-
-	is the proper syntax to specify multiple targets.  When specifying
-options via BONDING_OPTS, it is not necessary to edit /etc/modprobe.d/*.conf.
-
-	For even older versions of initscripts that do not support
-BONDING_OPTS, it is necessary to edit /etc/modprobe.d/*.conf, depending upon
-your distro) to load the bonding module with your desired options when the
-bond0 interface is brought up.  The following lines in /etc/modprobe.d/*.conf
-will load the bonding module, and select its options:
-
-alias bond0 bonding
-options bond0 mode=balance-alb miimon=100
-
-	Replace the sample parameters with the appropriate set of
-options for your configuration.
-
-	Finally run "/etc/rc.d/init.d/network restart" as root.  This
-will restart the networking subsystem and your bond link should be now
-up and running.
-
-3.2.1 Using DHCP with Initscripts
----------------------------------
-
-	Recent versions of initscripts (the versions supplied with Fedora
-Core 3 and Red Hat Enterprise Linux 4, or later versions, are reported to
-work) have support for assigning IP information to bonding devices via
-DHCP.
-
-	To configure bonding for DHCP, configure it as described
-above, except replace the line "BOOTPROTO=none" with "BOOTPROTO=dhcp"
-and add a line consisting of "TYPE=Bonding".  Note that the TYPE value
-is case sensitive.
-
-3.2.2 Configuring Multiple Bonds with Initscripts
--------------------------------------------------
-
-	Initscripts packages that are included with Fedora 7 and Red Hat
-Enterprise Linux 5 support multiple bonding interfaces by simply
-specifying the appropriate BONDING_OPTS= in ifcfg-bondX where X is the
-number of the bond.  This support requires sysfs support in the kernel,
-and a bonding driver of version 3.0.0 or later.  Other configurations may
-not support this method for specifying multiple bonding interfaces; for
-those instances, see the "Configuring Multiple Bonds Manually" section,
-below.
-
-3.3 Configuring Bonding Manually with iproute2
------------------------------------------------
-
-	This section applies to distros whose network initialization
-scripts (the sysconfig or initscripts package) do not have specific
-knowledge of bonding.  One such distro is SuSE Linux Enterprise Server
-version 8.
-
-	The general method for these systems is to place the bonding
-module parameters into a config file in /etc/modprobe.d/ (as
-appropriate for the installed distro), then add modprobe and/or
-`ip link` commands to the system's global init script.  The name of
-the global init script differs; for sysconfig, it is
-/etc/init.d/boot.local and for initscripts it is /etc/rc.d/rc.local.
-
-	For example, if you wanted to make a simple bond of two e100
-devices (presumed to be eth0 and eth1), and have it persist across
-reboots, edit the appropriate file (/etc/init.d/boot.local or
-/etc/rc.d/rc.local), and add the following:
-
-modprobe bonding mode=balance-alb miimon=100
-modprobe e100
-ifconfig bond0 192.168.1.1 netmask 255.255.255.0 up
-ip link set eth0 master bond0
-ip link set eth1 master bond0
-
-	Replace the example bonding module parameters and bond0
-network configuration (IP address, netmask, etc) with the appropriate
-values for your configuration.
-
-	Unfortunately, this method will not provide support for the
-ifup and ifdown scripts on the bond devices.  To reload the bonding
-configuration, it is necessary to run the initialization script, e.g.,
-
-# /etc/init.d/boot.local
-
-	or
-
-# /etc/rc.d/rc.local
-
-	It may be desirable in such a case to create a separate script
-which only initializes the bonding configuration, then call that
-separate script from within boot.local.  This allows for bonding to be
-enabled without re-running the entire global init script.
-
-	To shut down the bonding devices, it is necessary to first
-mark the bonding device itself as being down, then remove the
-appropriate device driver modules.  For our example above, you can do
-the following:
-
-# ifconfig bond0 down
-# rmmod bonding
-# rmmod e100
-
-	Again, for convenience, it may be desirable to create a script
-with these commands.
-
-
-3.3.1 Configuring Multiple Bonds Manually
------------------------------------------
-
-	This section contains information on configuring multiple
-bonding devices with differing options for those systems whose network
-initialization scripts lack support for configuring multiple bonds.
-
-	If you require multiple bonding devices, but all with the same
-options, you may wish to use the "max_bonds" module parameter,
-documented above.
-
-	To create multiple bonding devices with differing options, it is
-preferable to use bonding parameters exported by sysfs, documented in the
-section below.
-
-	For versions of bonding without sysfs support, the only means to
-provide multiple instances of bonding with differing options is to load
-the bonding driver multiple times.  Note that current versions of the
-sysconfig network initialization scripts handle this automatically; if
-your distro uses these scripts, no special action is needed.  See the
-section Configuring Bonding Devices, above, if you're not sure about your
-network initialization scripts.
-
-	To load multiple instances of the module, it is necessary to
-specify a different name for each instance (the module loading system
-requires that every loaded module, even multiple instances of the same
-module, have a unique name).  This is accomplished by supplying multiple
-sets of bonding options in /etc/modprobe.d/*.conf, for example:
-
-alias bond0 bonding
-options bond0 -o bond0 mode=balance-rr miimon=100
-
-alias bond1 bonding
-options bond1 -o bond1 mode=balance-alb miimon=50
-
-	will load the bonding module two times.  The first instance is
-named "bond0" and creates the bond0 device in balance-rr mode with an
-miimon of 100.  The second instance is named "bond1" and creates the
-bond1 device in balance-alb mode with an miimon of 50.
-
-	In some circumstances (typically with older distributions),
-the above does not work, and the second bonding instance never sees
-its options.  In that case, the second options line can be substituted
-as follows:
-
-install bond1 /sbin/modprobe --ignore-install bonding -o bond1 \
-	mode=balance-alb miimon=50
-
-	This may be repeated any number of times, specifying a new and
-unique name in place of bond1 for each subsequent instance.
-
-	It has been observed that some Red Hat supplied kernels are unable
-to rename modules at load time (the "-o bond1" part).  Attempts to pass
-that option to modprobe will produce an "Operation not permitted" error.
-This has been reported on some Fedora Core kernels, and has been seen on
-RHEL 4 as well.  On kernels exhibiting this problem, it will be impossible
-to configure multiple bonds with differing parameters (as they are older
-kernels, and also lack sysfs support).
-
-3.4 Configuring Bonding Manually via Sysfs
-------------------------------------------
-
-	Starting with version 3.0.0, Channel Bonding may be configured
-via the sysfs interface.  This interface allows dynamic configuration
-of all bonds in the system without unloading the module.  It also
-allows for adding and removing bonds at runtime.  Ifenslave is no
-longer required, though it is still supported.
-
-	Use of the sysfs interface allows you to use multiple bonds
-with different configurations without having to reload the module.
-It also allows you to use multiple, differently configured bonds when
-bonding is compiled into the kernel.
-
-	You must have the sysfs filesystem mounted to configure
-bonding this way.  The examples in this document assume that you
-are using the standard mount point for sysfs, e.g. /sys.  If your
-sysfs filesystem is mounted elsewhere, you will need to adjust the
-example paths accordingly.
-
-Creating and Destroying Bonds
------------------------------
-To add a new bond foo:
-# echo +foo > /sys/class/net/bonding_masters
-
-To remove an existing bond bar:
-# echo -bar > /sys/class/net/bonding_masters
-
-To show all existing bonds:
-# cat /sys/class/net/bonding_masters
-
-NOTE: due to 4K size limitation of sysfs files, this list may be
-truncated if you have more than a few hundred bonds.  This is unlikely
-to occur under normal operating conditions.
-
-Adding and Removing Slaves
---------------------------
-	Interfaces may be enslaved to a bond using the file
-/sys/class/net/<bond>/bonding/slaves.  The semantics for this file
-are the same as for the bonding_masters file.
-
-To enslave interface eth0 to bond bond0:
-# ifconfig bond0 up
-# echo +eth0 > /sys/class/net/bond0/bonding/slaves
-
-To free slave eth0 from bond bond0:
-# echo -eth0 > /sys/class/net/bond0/bonding/slaves
-
-	When an interface is enslaved to a bond, symlinks between the
-two are created in the sysfs filesystem.  In this case, you would get
-/sys/class/net/bond0/slave_eth0 pointing to /sys/class/net/eth0, and
-/sys/class/net/eth0/master pointing to /sys/class/net/bond0.
-
-	This means that you can tell quickly whether or not an
-interface is enslaved by looking for the master symlink.  Thus:
-# echo -eth0 > /sys/class/net/eth0/master/bonding/slaves
-will free eth0 from whatever bond it is enslaved to, regardless of
-the name of the bond interface.
-
-Changing a Bond's Configuration
--------------------------------
-	Each bond may be configured individually by manipulating the
-files located in /sys/class/net/<bond name>/bonding
-
-	The names of these files correspond directly with the command-
-line parameters described elsewhere in this file, and, with the
-exception of arp_ip_target, they accept the same values.  To see the
-current setting, simply cat the appropriate file.
-
-	A few examples will be given here; for specific usage
-guidelines for each parameter, see the appropriate section in this
-document.
-
-To configure bond0 for balance-alb mode:
-# ifconfig bond0 down
-# echo 6 > /sys/class/net/bond0/bonding/mode
- - or -
-# echo balance-alb > /sys/class/net/bond0/bonding/mode
-	NOTE: The bond interface must be down before the mode can be
-changed.
-
-To enable MII monitoring on bond0 with a 1 second interval:
-# echo 1000 > /sys/class/net/bond0/bonding/miimon
-	NOTE: If ARP monitoring is enabled, it will disabled when MII
-monitoring is enabled, and vice-versa.
-
-To add ARP targets:
-# echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
-# echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
-	NOTE:  up to 16 target addresses may be specified.
-
-To remove an ARP target:
-# echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
-
-To configure the interval between learning packet transmits:
-# echo 12 > /sys/class/net/bond0/bonding/lp_interval
-	NOTE: the lp_interval is the number of seconds between instances where
-the bonding driver sends learning packets to each slaves peer switch.  The
-default interval is 1 second.
-
-Example Configuration
----------------------
-	We begin with the same example that is shown in section 3.3,
-executed with sysfs, and without using ifenslave.
-
-	To make a simple bond of two e100 devices (presumed to be eth0
-and eth1), and have it persist across reboots, edit the appropriate
-file (/etc/init.d/boot.local or /etc/rc.d/rc.local), and add the
-following:
-
-modprobe bonding
-modprobe e100
-echo balance-alb > /sys/class/net/bond0/bonding/mode
-ifconfig bond0 192.168.1.1 netmask 255.255.255.0 up
-echo 100 > /sys/class/net/bond0/bonding/miimon
-echo +eth0 > /sys/class/net/bond0/bonding/slaves
-echo +eth1 > /sys/class/net/bond0/bonding/slaves
-
-	To add a second bond, with two e1000 interfaces in
-active-backup mode, using ARP monitoring, add the following lines to
-your init script:
-
-modprobe e1000
-echo +bond1 > /sys/class/net/bonding_masters
-echo active-backup > /sys/class/net/bond1/bonding/mode
-ifconfig bond1 192.168.2.1 netmask 255.255.255.0 up
-echo +192.168.2.100 /sys/class/net/bond1/bonding/arp_ip_target
-echo 2000 > /sys/class/net/bond1/bonding/arp_interval
-echo +eth2 > /sys/class/net/bond1/bonding/slaves
-echo +eth3 > /sys/class/net/bond1/bonding/slaves
-
-3.5 Configuration with Interfaces Support
------------------------------------------
-
-        This section applies to distros which use /etc/network/interfaces file
-to describe network interface configuration, most notably Debian and it's
-derivatives.
-
-	The ifup and ifdown commands on Debian don't support bonding out of
-the box. The ifenslave-2.6 package should be installed to provide bonding
-support.  Once installed, this package will provide bond-* options to be used
-into /etc/network/interfaces.
-
-	Note that ifenslave-2.6 package will load the bonding module and use
-the ifenslave command when appropriate.
-
-Example Configurations
-----------------------
-
-In /etc/network/interfaces, the following stanza will configure bond0, in
-active-backup mode, with eth0 and eth1 as slaves.
-
-auto bond0
-iface bond0 inet dhcp
-	bond-slaves eth0 eth1
-	bond-mode active-backup
-	bond-miimon 100
-	bond-primary eth0 eth1
-
-If the above configuration doesn't work, you might have a system using
-upstart for system startup. This is most notably true for recent
-Ubuntu versions. The following stanza in /etc/network/interfaces will
-produce the same result on those systems.
-
-auto bond0
-iface bond0 inet dhcp
-	bond-slaves none
-	bond-mode active-backup
-	bond-miimon 100
-
-auto eth0
-iface eth0 inet manual
-	bond-master bond0
-	bond-primary eth0 eth1
-
-auto eth1
-iface eth1 inet manual
-	bond-master bond0
-	bond-primary eth0 eth1
-
-For a full list of bond-* supported options in /etc/network/interfaces and some
-more advanced examples tailored to you particular distros, see the files in
-/usr/share/doc/ifenslave-2.6.
-
-3.6 Overriding Configuration for Special Cases
-----------------------------------------------
-
-When using the bonding driver, the physical port which transmits a frame is
-typically selected by the bonding driver, and is not relevant to the user or
-system administrator.  The output port is simply selected using the policies of
-the selected bonding mode.  On occasion however, it is helpful to direct certain
-classes of traffic to certain physical interfaces on output to implement
-slightly more complex policies.  For example, to reach a web server over a
-bonded interface in which eth0 connects to a private network, while eth1
-connects via a public network, it may be desirous to bias the bond to send said
-traffic over eth0 first, using eth1 only as a fall back, while all other traffic
-can safely be sent over either interface.  Such configurations may be achieved
-using the traffic control utilities inherent in linux.
-
-By default the bonding driver is multiqueue aware and 16 queues are created
-when the driver initializes (see Documentation/networking/multiqueue.txt
-for details).  If more or less queues are desired the module parameter
-tx_queues can be used to change this value.  There is no sysfs parameter
-available as the allocation is done at module init time.
-
-The output of the file /proc/net/bonding/bondX has changed so the output Queue
-ID is now printed for each slave:
-
-Bonding Mode: fault-tolerance (active-backup)
-Primary Slave: None
-Currently Active Slave: eth0
-MII Status: up
-MII Polling Interval (ms): 0
-Up Delay (ms): 0
-Down Delay (ms): 0
-
-Slave Interface: eth0
-MII Status: up
-Link Failure Count: 0
-Permanent HW addr: 00:1a:a0:12:8f:cb
-Slave queue ID: 0
-
-Slave Interface: eth1
-MII Status: up
-Link Failure Count: 0
-Permanent HW addr: 00:1a:a0:12:8f:cc
-Slave queue ID: 2
-
-The queue_id for a slave can be set using the command:
-
-# echo "eth1:2" > /sys/class/net/bond0/bonding/queue_id
-
-Any interface that needs a queue_id set should set it with multiple calls
-like the one above until proper priorities are set for all interfaces.  On
-distributions that allow configuration via initscripts, multiple 'queue_id'
-arguments can be added to BONDING_OPTS to set all needed slave queues.
-
-These queue id's can be used in conjunction with the tc utility to configure
-a multiqueue qdisc and filters to bias certain traffic to transmit on certain
-slave devices.  For instance, say we wanted, in the above configuration to
-force all traffic bound to 192.168.1.100 to use eth1 in the bond as its output
-device. The following commands would accomplish this:
-
-# tc qdisc add dev bond0 handle 1 root multiq
-
-# tc filter add dev bond0 protocol ip parent 1: prio 1 u32 match ip dst \
-	192.168.1.100 action skbedit queue_mapping 2
-
-These commands tell the kernel to attach a multiqueue queue discipline to the
-bond0 interface and filter traffic enqueued to it, such that packets with a dst
-ip of 192.168.1.100 have their output queue mapping value overwritten to 2.
-This value is then passed into the driver, causing the normal output path
-selection policy to be overridden, selecting instead qid 2, which maps to eth1.
-
-Note that qid values begin at 1.  Qid 0 is reserved to initiate to the driver
-that normal output policy selection should take place.  One benefit to simply
-leaving the qid for a slave to 0 is the multiqueue awareness in the bonding
-driver that is now present.  This awareness allows tc filters to be placed on
-slave devices as well as bond devices and the bonding driver will simply act as
-a pass-through for selecting output queues on the slave device rather than 
-output port selection.
-
-This feature first appeared in bonding driver version 3.7.0 and support for
-output slave selection was limited to round-robin and active-backup modes.
-
-3.7 Configuring LACP for 802.3ad mode in a more secure way
-----------------------------------------------------------
-
-When using 802.3ad bonding mode, the Actor (host) and Partner (switch)
-exchange LACPDUs.  These LACPDUs cannot be sniffed, because they are
-destined to link local mac addresses (which switches/bridges are not
-supposed to forward).  However, most of the values are easily predictable
-or are simply the machine's MAC address (which is trivially known to all
-other hosts in the same L2).  This implies that other machines in the L2
-domain can spoof LACPDU packets from other hosts to the switch and potentially
-cause mayhem by joining (from the point of view of the switch) another
-machine's aggregate, thus receiving a portion of that hosts incoming
-traffic and / or spoofing traffic from that machine themselves (potentially
-even successfully terminating some portion of flows). Though this is not
-a likely scenario, one could avoid this possibility by simply configuring
-few bonding parameters:
-
-   (a) ad_actor_system : You can set a random mac-address that can be used for
-       these LACPDU exchanges. The value can not be either NULL or Multicast.
-       Also it's preferable to set the local-admin bit. Following shell code
-       generates a random mac-address as described above.
-
-       # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \
-                                $(( (RANDOM & 0xFE) | 0x02 )) \
-                                $(( RANDOM & 0xFF )) \
-                                $(( RANDOM & 0xFF )) \
-                                $(( RANDOM & 0xFF )) \
-                                $(( RANDOM & 0xFF )) \
-                                $(( RANDOM & 0xFF )))
-       # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system
-
-   (b) ad_actor_sys_prio : Randomize the system priority. The default value
-       is 65535, but system can take the value from 1 - 65535. Following shell
-       code generates random priority and sets it.
-
-       # sys_prio=$(( 1 + RANDOM + RANDOM ))
-       # echo $sys_prio > /sys/class/net/bond0/bonding/ad_actor_sys_prio
-
-   (c) ad_user_port_key : Use the user portion of the port-key. The default
-       keeps this empty. These are the upper 10 bits of the port-key and value
-       ranges from 0 - 1023. Following shell code generates these 10 bits and
-       sets it.
-
-       # usr_port_key=$(( RANDOM & 0x3FF ))
-       # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key
-
-
-4 Querying Bonding Configuration
-=================================
-
-4.1 Bonding Configuration
--------------------------
-
-	Each bonding device has a read-only file residing in the
-/proc/net/bonding directory.  The file contents include information
-about the bonding configuration, options and state of each slave.
-
-	For example, the contents of /proc/net/bonding/bond0 after the
-driver is loaded with parameters of mode=0 and miimon=1000 is
-generally as follows:
-
-	Ethernet Channel Bonding Driver: 2.6.1 (October 29, 2004)
-        Bonding Mode: load balancing (round-robin)
-        Currently Active Slave: eth0
-        MII Status: up
-        MII Polling Interval (ms): 1000
-        Up Delay (ms): 0
-        Down Delay (ms): 0
-
-        Slave Interface: eth1
-        MII Status: up
-        Link Failure Count: 1
-
-        Slave Interface: eth0
-        MII Status: up
-        Link Failure Count: 1
-
-	The precise format and contents will change depending upon the
-bonding configuration, state, and version of the bonding driver.
-
-4.2 Network configuration
--------------------------
-
-	The network configuration can be inspected using the ifconfig
-command.  Bonding devices will have the MASTER flag set; Bonding slave
-devices will have the SLAVE flag set.  The ifconfig output does not
-contain information on which slaves are associated with which masters.
-
-	In the example below, the bond0 interface is the master
-(MASTER) while eth0 and eth1 are slaves (SLAVE). Notice all slaves of
-bond0 have the same MAC address (HWaddr) as bond0 for all modes except
-TLB and ALB that require a unique MAC address for each slave.
-
-# /sbin/ifconfig
-bond0     Link encap:Ethernet  HWaddr 00:C0:F0:1F:37:B4
-          inet addr:XXX.XXX.XXX.YYY  Bcast:XXX.XXX.XXX.255  Mask:255.255.252.0
-          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
-          RX packets:7224794 errors:0 dropped:0 overruns:0 frame:0
-          TX packets:3286647 errors:1 dropped:0 overruns:1 carrier:0
-          collisions:0 txqueuelen:0
-
-eth0      Link encap:Ethernet  HWaddr 00:C0:F0:1F:37:B4
-          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
-          RX packets:3573025 errors:0 dropped:0 overruns:0 frame:0
-          TX packets:1643167 errors:1 dropped:0 overruns:1 carrier:0
-          collisions:0 txqueuelen:100
-          Interrupt:10 Base address:0x1080
-
-eth1      Link encap:Ethernet  HWaddr 00:C0:F0:1F:37:B4
-          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
-          RX packets:3651769 errors:0 dropped:0 overruns:0 frame:0
-          TX packets:1643480 errors:0 dropped:0 overruns:0 carrier:0
-          collisions:0 txqueuelen:100
-          Interrupt:9 Base address:0x1400
-
-5. Switch Configuration
-=======================
-
-	For this section, "switch" refers to whatever system the
-bonded devices are directly connected to (i.e., where the other end of
-the cable plugs into).  This may be an actual dedicated switch device,
-or it may be another regular system (e.g., another computer running
-Linux),
-
-	The active-backup, balance-tlb and balance-alb modes do not
-require any specific configuration of the switch.
-
-	The 802.3ad mode requires that the switch have the appropriate
-ports configured as an 802.3ad aggregation.  The precise method used
-to configure this varies from switch to switch, but, for example, a
-Cisco 3550 series switch requires that the appropriate ports first be
-grouped together in a single etherchannel instance, then that
-etherchannel is set to mode "lacp" to enable 802.3ad (instead of
-standard EtherChannel).
-
-	The balance-rr, balance-xor and broadcast modes generally
-require that the switch have the appropriate ports grouped together.
-The nomenclature for such a group differs between switches, it may be
-called an "etherchannel" (as in the Cisco example, above), a "trunk
-group" or some other similar variation.  For these modes, each switch
-will also have its own configuration options for the switch's transmit
-policy to the bond.  Typical choices include XOR of either the MAC or
-IP addresses.  The transmit policy of the two peers does not need to
-match.  For these three modes, the bonding mode really selects a
-transmit policy for an EtherChannel group; all three will interoperate
-with another EtherChannel group.
-
-
-6. 802.1q VLAN Support
-======================
-
-	It is possible to configure VLAN devices over a bond interface
-using the 8021q driver.  However, only packets coming from the 8021q
-driver and passing through bonding will be tagged by default.  Self
-generated packets, for example, bonding's learning packets or ARP
-packets generated by either ALB mode or the ARP monitor mechanism, are
-tagged internally by bonding itself.  As a result, bonding must
-"learn" the VLAN IDs configured above it, and use those IDs to tag
-self generated packets.
-
-	For reasons of simplicity, and to support the use of adapters
-that can do VLAN hardware acceleration offloading, the bonding
-interface declares itself as fully hardware offloading capable, it gets
-the add_vid/kill_vid notifications to gather the necessary
-information, and it propagates those actions to the slaves.  In case
-of mixed adapter types, hardware accelerated tagged packets that
-should go through an adapter that is not offloading capable are
-"un-accelerated" by the bonding driver so the VLAN tag sits in the
-regular location.
-
-	VLAN interfaces *must* be added on top of a bonding interface
-only after enslaving at least one slave.  The bonding interface has a
-hardware address of 00:00:00:00:00:00 until the first slave is added.
-If the VLAN interface is created prior to the first enslavement, it
-would pick up the all-zeroes hardware address.  Once the first slave
-is attached to the bond, the bond device itself will pick up the
-slave's hardware address, which is then available for the VLAN device.
-
-	Also, be aware that a similar problem can occur if all slaves
-are released from a bond that still has one or more VLAN interfaces on
-top of it.  When a new slave is added, the bonding interface will
-obtain its hardware address from the first slave, which might not
-match the hardware address of the VLAN interfaces (which was
-ultimately copied from an earlier slave).
-
-	There are two methods to insure that the VLAN device operates
-with the correct hardware address if all slaves are removed from a
-bond interface:
-
-	1. Remove all VLAN interfaces then recreate them
-
-	2. Set the bonding interface's hardware address so that it
-matches the hardware address of the VLAN interfaces.
-
-	Note that changing a VLAN interface's HW address would set the
-underlying device -- i.e. the bonding interface -- to promiscuous
-mode, which might not be what you want.
-
-
-7. Link Monitoring
-==================
-
-	The bonding driver at present supports two schemes for
-monitoring a slave device's link state: the ARP monitor and the MII
-monitor.
-
-	At the present time, due to implementation restrictions in the
-bonding driver itself, it is not possible to enable both ARP and MII
-monitoring simultaneously.
-
-7.1 ARP Monitor Operation
--------------------------
-
-	The ARP monitor operates as its name suggests: it sends ARP
-queries to one or more designated peer systems on the network, and
-uses the response as an indication that the link is operating.  This
-gives some assurance that traffic is actually flowing to and from one
-or more peers on the local network.
-
-	The ARP monitor relies on the device driver itself to verify
-that traffic is flowing.  In particular, the driver must keep up to
-date the last receive time, dev->last_rx.  Drivers that use NETIF_F_LLTX
-flag must also update netdev_queue->trans_start.  If they do not, then the
-ARP monitor will immediately fail any slaves using that driver, and
-those slaves will stay down.  If networking monitoring (tcpdump, etc)
-shows the ARP requests and replies on the network, then it may be that
-your device driver is not updating last_rx and trans_start.
-
-7.2 Configuring Multiple ARP Targets
-------------------------------------
-
-	While ARP monitoring can be done with just one target, it can
-be useful in a High Availability setup to have several targets to
-monitor.  In the case of just one target, the target itself may go
-down or have a problem making it unresponsive to ARP requests.  Having
-an additional target (or several) increases the reliability of the ARP
-monitoring.
-
-	Multiple ARP targets must be separated by commas as follows:
-
-# example options for ARP monitoring with three targets
-alias bond0 bonding
-options bond0 arp_interval=60 arp_ip_target=192.168.0.1,192.168.0.3,192.168.0.9
-
-	For just a single target the options would resemble:
-
-# example options for ARP monitoring with one target
-alias bond0 bonding
-options bond0 arp_interval=60 arp_ip_target=192.168.0.100
-
-
-7.3 MII Monitor Operation
--------------------------
-
-	The MII monitor monitors only the carrier state of the local
-network interface.  It accomplishes this in one of three ways: by
-depending upon the device driver to maintain its carrier state, by
-querying the device's MII registers, or by making an ethtool query to
-the device.
-
-	If the use_carrier module parameter is 1 (the default value),
-then the MII monitor will rely on the driver for carrier state
-information (via the netif_carrier subsystem).  As explained in the
-use_carrier parameter information, above, if the MII monitor fails to
-detect carrier loss on the device (e.g., when the cable is physically
-disconnected), it may be that the driver does not support
-netif_carrier.
-
-	If use_carrier is 0, then the MII monitor will first query the
-device's (via ioctl) MII registers and check the link state.  If that
-request fails (not just that it returns carrier down), then the MII
-monitor will make an ethtool ETHOOL_GLINK request to attempt to obtain
-the same information.  If both methods fail (i.e., the driver either
-does not support or had some error in processing both the MII register
-and ethtool requests), then the MII monitor will assume the link is
-up.
-
-8. Potential Sources of Trouble
-===============================
-
-8.1 Adventures in Routing
--------------------------
-
-	When bonding is configured, it is important that the slave
-devices not have routes that supersede routes of the master (or,
-generally, not have routes at all).  For example, suppose the bonding
-device bond0 has two slaves, eth0 and eth1, and the routing table is
-as follows:
-
-Kernel IP routing table
-Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
-10.0.0.0        0.0.0.0         255.255.0.0     U        40 0          0 eth0
-10.0.0.0        0.0.0.0         255.255.0.0     U        40 0          0 eth1
-10.0.0.0        0.0.0.0         255.255.0.0     U        40 0          0 bond0
-127.0.0.0       0.0.0.0         255.0.0.0       U        40 0          0 lo
-
-	This routing configuration will likely still update the
-receive/transmit times in the driver (needed by the ARP monitor), but
-may bypass the bonding driver (because outgoing traffic to, in this
-case, another host on network 10 would use eth0 or eth1 before bond0).
-
-	The ARP monitor (and ARP itself) may become confused by this
-configuration, because ARP requests (generated by the ARP monitor)
-will be sent on one interface (bond0), but the corresponding reply
-will arrive on a different interface (eth0).  This reply looks to ARP
-as an unsolicited ARP reply (because ARP matches replies on an
-interface basis), and is discarded.  The MII monitor is not affected
-by the state of the routing table.
-
-	The solution here is simply to insure that slaves do not have
-routes of their own, and if for some reason they must, those routes do
-not supersede routes of their master.  This should generally be the
-case, but unusual configurations or errant manual or automatic static
-route additions may cause trouble.
-
-8.2 Ethernet Device Renaming
-----------------------------
-
-	On systems with network configuration scripts that do not
-associate physical devices directly with network interface names (so
-that the same physical device always has the same "ethX" name), it may
-be necessary to add some special logic to config files in
-/etc/modprobe.d/.
-
-	For example, given a modules.conf containing the following:
-
-alias bond0 bonding
-options bond0 mode=some-mode miimon=50
-alias eth0 tg3
-alias eth1 tg3
-alias eth2 e1000
-alias eth3 e1000
-
-	If neither eth0 and eth1 are slaves to bond0, then when the
-bond0 interface comes up, the devices may end up reordered.  This
-happens because bonding is loaded first, then its slave device's
-drivers are loaded next.  Since no other drivers have been loaded,
-when the e1000 driver loads, it will receive eth0 and eth1 for its
-devices, but the bonding configuration tries to enslave eth2 and eth3
-(which may later be assigned to the tg3 devices).
-
-	Adding the following:
-
-add above bonding e1000 tg3
-
-	causes modprobe to load e1000 then tg3, in that order, when
-bonding is loaded.  This command is fully documented in the
-modules.conf manual page.
-
-	On systems utilizing modprobe an equivalent problem can occur.
-In this case, the following can be added to config files in
-/etc/modprobe.d/ as:
-
-softdep bonding pre: tg3 e1000
-
-	This will load tg3 and e1000 modules before loading the bonding one.
-Full documentation on this can be found in the modprobe.d and modprobe
-manual pages.
-
-8.3. Painfully Slow Or No Failed Link Detection By Miimon
----------------------------------------------------------
-
-	By default, bonding enables the use_carrier option, which
-instructs bonding to trust the driver to maintain carrier state.
-
-	As discussed in the options section, above, some drivers do
-not support the netif_carrier_on/_off link state tracking system.
-With use_carrier enabled, bonding will always see these links as up,
-regardless of their actual state.
-
-	Additionally, other drivers do support netif_carrier, but do
-not maintain it in real time, e.g., only polling the link state at
-some fixed interval.  In this case, miimon will detect failures, but
-only after some long period of time has expired.  If it appears that
-miimon is very slow in detecting link failures, try specifying
-use_carrier=0 to see if that improves the failure detection time.  If
-it does, then it may be that the driver checks the carrier state at a
-fixed interval, but does not cache the MII register values (so the
-use_carrier=0 method of querying the registers directly works).  If
-use_carrier=0 does not improve the failover, then the driver may cache
-the registers, or the problem may be elsewhere.
-
-	Also, remember that miimon only checks for the device's
-carrier state.  It has no way to determine the state of devices on or
-beyond other ports of a switch, or if a switch is refusing to pass
-traffic while still maintaining carrier on.
-
-9. SNMP agents
-===============
-
-	If running SNMP agents, the bonding driver should be loaded
-before any network drivers participating in a bond.  This requirement
-is due to the interface index (ipAdEntIfIndex) being associated to
-the first interface found with a given IP address.  That is, there is
-only one ipAdEntIfIndex for each IP address.  For example, if eth0 and
-eth1 are slaves of bond0 and the driver for eth0 is loaded before the
-bonding driver, the interface for the IP address will be associated
-with the eth0 interface.  This configuration is shown below, the IP
-address 192.168.1.1 has an interface index of 2 which indexes to eth0
-in the ifDescr table (ifDescr.2).
-
-     interfaces.ifTable.ifEntry.ifDescr.1 = lo
-     interfaces.ifTable.ifEntry.ifDescr.2 = eth0
-     interfaces.ifTable.ifEntry.ifDescr.3 = eth1
-     interfaces.ifTable.ifEntry.ifDescr.4 = eth2
-     interfaces.ifTable.ifEntry.ifDescr.5 = eth3
-     interfaces.ifTable.ifEntry.ifDescr.6 = bond0
-     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.10.10.10.10 = 5
-     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.192.168.1.1 = 2
-     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.10.74.20.94 = 4
-     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.127.0.0.1 = 1
-
-	This problem is avoided by loading the bonding driver before
-any network drivers participating in a bond.  Below is an example of
-loading the bonding driver first, the IP address 192.168.1.1 is
-correctly associated with ifDescr.2.
-
-     interfaces.ifTable.ifEntry.ifDescr.1 = lo
-     interfaces.ifTable.ifEntry.ifDescr.2 = bond0
-     interfaces.ifTable.ifEntry.ifDescr.3 = eth0
-     interfaces.ifTable.ifEntry.ifDescr.4 = eth1
-     interfaces.ifTable.ifEntry.ifDescr.5 = eth2
-     interfaces.ifTable.ifEntry.ifDescr.6 = eth3
-     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.10.10.10.10 = 6
-     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.192.168.1.1 = 2
-     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.10.74.20.94 = 5
-     ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.127.0.0.1 = 1
-
-	While some distributions may not report the interface name in
-ifDescr, the association between the IP address and IfIndex remains
-and SNMP functions such as Interface_Scan_Next will report that
-association.
-
-10. Promiscuous mode
-====================
-
-	When running network monitoring tools, e.g., tcpdump, it is
-common to enable promiscuous mode on the device, so that all traffic
-is seen (instead of seeing only traffic destined for the local host).
-The bonding driver handles promiscuous mode changes to the bonding
-master device (e.g., bond0), and propagates the setting to the slave
-devices.
-
-	For the balance-rr, balance-xor, broadcast, and 802.3ad modes,
-the promiscuous mode setting is propagated to all slaves.
-
-	For the active-backup, balance-tlb and balance-alb modes, the
-promiscuous mode setting is propagated only to the active slave.
-
-	For balance-tlb mode, the active slave is the slave currently
-receiving inbound traffic.
-
-	For balance-alb mode, the active slave is the slave used as a
-"primary."  This slave is used for mode-specific control traffic, for
-sending to peers that are unassigned or if the load is unbalanced.
-
-	For the active-backup, balance-tlb and balance-alb modes, when
-the active slave changes (e.g., due to a link failure), the
-promiscuous setting will be propagated to the new active slave.
-
-11. Configuring Bonding for High Availability
-=============================================
-
-	High Availability refers to configurations that provide
-maximum network availability by having redundant or backup devices,
-links or switches between the host and the rest of the world.  The
-goal is to provide the maximum availability of network connectivity
-(i.e., the network always works), even though other configurations
-could provide higher throughput.
-
-11.1 High Availability in a Single Switch Topology
---------------------------------------------------
-
-	If two hosts (or a host and a single switch) are directly
-connected via multiple physical links, then there is no availability
-penalty to optimizing for maximum bandwidth.  In this case, there is
-only one switch (or peer), so if it fails, there is no alternative
-access to fail over to.  Additionally, the bonding load balance modes
-support link monitoring of their members, so if individual links fail,
-the load will be rebalanced across the remaining devices.
-
-	See Section 12, "Configuring Bonding for Maximum Throughput"
-for information on configuring bonding with one peer device.
-
-11.2 High Availability in a Multiple Switch Topology
-----------------------------------------------------
-
-	With multiple switches, the configuration of bonding and the
-network changes dramatically.  In multiple switch topologies, there is
-a trade off between network availability and usable bandwidth.
-
-	Below is a sample network, configured to maximize the
-availability of the network:
-
-                |                                     |
-                |port3                           port3|
-          +-----+----+                          +-----+----+
-          |          |port2       ISL      port2|          |
-          | switch A +--------------------------+ switch B |
-          |          |                          |          |
-          +-----+----+                          +-----++---+
-                |port1                           port1|
-                |             +-------+               |
-                +-------------+ host1 +---------------+
-                         eth0 +-------+ eth1
-
-	In this configuration, there is a link between the two
-switches (ISL, or inter switch link), and multiple ports connecting to
-the outside world ("port3" on each switch).  There is no technical
-reason that this could not be extended to a third switch.
-
-11.2.1 HA Bonding Mode Selection for Multiple Switch Topology
--------------------------------------------------------------
-
-	In a topology such as the example above, the active-backup and
-broadcast modes are the only useful bonding modes when optimizing for
-availability; the other modes require all links to terminate on the
-same peer for them to behave rationally.
-
-active-backup: This is generally the preferred mode, particularly if
-	the switches have an ISL and play together well.  If the
-	network configuration is such that one switch is specifically
-	a backup switch (e.g., has lower capacity, higher cost, etc),
-	then the primary option can be used to insure that the
-	preferred link is always used when it is available.
-
-broadcast: This mode is really a special purpose mode, and is suitable
-	only for very specific needs.  For example, if the two
-	switches are not connected (no ISL), and the networks beyond
-	them are totally independent.  In this case, if it is
-	necessary for some specific one-way traffic to reach both
-	independent networks, then the broadcast mode may be suitable.
-
-11.2.2 HA Link Monitoring Selection for Multiple Switch Topology
-----------------------------------------------------------------
-
-	The choice of link monitoring ultimately depends upon your
-switch.  If the switch can reliably fail ports in response to other
-failures, then either the MII or ARP monitors should work.  For
-example, in the above example, if the "port3" link fails at the remote
-end, the MII monitor has no direct means to detect this.  The ARP
-monitor could be configured with a target at the remote end of port3,
-thus detecting that failure without switch support.
-
-	In general, however, in a multiple switch topology, the ARP
-monitor can provide a higher level of reliability in detecting end to
-end connectivity failures (which may be caused by the failure of any
-individual component to pass traffic for any reason).  Additionally,
-the ARP monitor should be configured with multiple targets (at least
-one for each switch in the network).  This will insure that,
-regardless of which switch is active, the ARP monitor has a suitable
-target to query.
-
-	Note, also, that of late many switches now support a functionality
-generally referred to as "trunk failover."  This is a feature of the
-switch that causes the link state of a particular switch port to be set
-down (or up) when the state of another switch port goes down (or up).
-Its purpose is to propagate link failures from logically "exterior" ports
-to the logically "interior" ports that bonding is able to monitor via
-miimon.  Availability and configuration for trunk failover varies by
-switch, but this can be a viable alternative to the ARP monitor when using
-suitable switches.
-
-12. Configuring Bonding for Maximum Throughput
-==============================================
-
-12.1 Maximizing Throughput in a Single Switch Topology
-------------------------------------------------------
-
-	In a single switch configuration, the best method to maximize
-throughput depends upon the application and network environment.  The
-various load balancing modes each have strengths and weaknesses in
-different environments, as detailed below.
-
-	For this discussion, we will break down the topologies into
-two categories.  Depending upon the destination of most traffic, we
-categorize them into either "gatewayed" or "local" configurations.
-
-	In a gatewayed configuration, the "switch" is acting primarily
-as a router, and the majority of traffic passes through this router to
-other networks.  An example would be the following:
-
-
-     +----------+                     +----------+
-     |          |eth0            port1|          | to other networks
-     | Host A   +---------------------+ router   +------------------->
-     |          +---------------------+          | Hosts B and C are out
-     |          |eth1            port2|          | here somewhere
-     +----------+                     +----------+
-
-	The router may be a dedicated router device, or another host
-acting as a gateway.  For our discussion, the important point is that
-the majority of traffic from Host A will pass through the router to
-some other network before reaching its final destination.
-
-	In a gatewayed network configuration, although Host A may
-communicate with many other systems, all of its traffic will be sent
-and received via one other peer on the local network, the router.
-
-	Note that the case of two systems connected directly via
-multiple physical links is, for purposes of configuring bonding, the
-same as a gatewayed configuration.  In that case, it happens that all
-traffic is destined for the "gateway" itself, not some other network
-beyond the gateway.
-
-	In a local configuration, the "switch" is acting primarily as
-a switch, and the majority of traffic passes through this switch to
-reach other stations on the same network.  An example would be the
-following:
-
-    +----------+            +----------+       +--------+
-    |          |eth0   port1|          +-------+ Host B |
-    |  Host A  +------------+  switch  |port3  +--------+
-    |          +------------+          |                  +--------+
-    |          |eth1   port2|          +------------------+ Host C |
-    +----------+            +----------+port4             +--------+
-
-
-	Again, the switch may be a dedicated switch device, or another
-host acting as a gateway.  For our discussion, the important point is
-that the majority of traffic from Host A is destined for other hosts
-on the same local network (Hosts B and C in the above example).
-
-	In summary, in a gatewayed configuration, traffic to and from
-the bonded device will be to the same MAC level peer on the network
-(the gateway itself, i.e., the router), regardless of its final
-destination.  In a local configuration, traffic flows directly to and
-from the final destinations, thus, each destination (Host B, Host C)
-will be addressed directly by their individual MAC addresses.
-
-	This distinction between a gatewayed and a local network
-configuration is important because many of the load balancing modes
-available use the MAC addresses of the local network source and
-destination to make load balancing decisions.  The behavior of each
-mode is described below.
-
-
-12.1.1 MT Bonding Mode Selection for Single Switch Topology
------------------------------------------------------------
-
-	This configuration is the easiest to set up and to understand,
-although you will have to decide which bonding mode best suits your
-needs.  The trade offs for each mode are detailed below:
-
-balance-rr: This mode is the only mode that will permit a single
-	TCP/IP connection to stripe traffic across multiple
-	interfaces. It is therefore the only mode that will allow a
-	single TCP/IP stream to utilize more than one interface's
-	worth of throughput.  This comes at a cost, however: the
-	striping generally results in peer systems receiving packets out
-	of order, causing TCP/IP's congestion control system to kick
-	in, often by retransmitting segments.
-
-	It is possible to adjust TCP/IP's congestion limits by
-	altering the net.ipv4.tcp_reordering sysctl parameter.  The
-	usual default value is 3. But keep in mind TCP stack is able
-	to automatically increase this when it detects reorders.
-
-	Note that the fraction of packets that will be delivered out of
-	order is highly variable, and is unlikely to be zero.  The level
-	of reordering depends upon a variety of factors, including the
-	networking interfaces, the switch, and the topology of the
-	configuration.  Speaking in general terms, higher speed network
-	cards produce more reordering (due to factors such as packet
-	coalescing), and a "many to many" topology will reorder at a
-	higher rate than a "many slow to one fast" configuration.
-
-	Many switches do not support any modes that stripe traffic
-	(instead choosing a port based upon IP or MAC level addresses);
-	for those devices, traffic for a particular connection flowing
-	through the switch to a balance-rr bond will not utilize greater
-	than one interface's worth of bandwidth.
-
-	If you are utilizing protocols other than TCP/IP, UDP for
-	example, and your application can tolerate out of order
-	delivery, then this mode can allow for single stream datagram
-	performance that scales near linearly as interfaces are added
-	to the bond.
-
-	This mode requires the switch to have the appropriate ports
-	configured for "etherchannel" or "trunking."
-
-active-backup: There is not much advantage in this network topology to
-	the active-backup mode, as the inactive backup devices are all
-	connected to the same peer as the primary.  In this case, a
-	load balancing mode (with link monitoring) will provide the
-	same level of network availability, but with increased
-	available bandwidth.  On the plus side, active-backup mode
-	does not require any configuration of the switch, so it may
-	have value if the hardware available does not support any of
-	the load balance modes.
-
-balance-xor: This mode will limit traffic such that packets destined
-	for specific peers will always be sent over the same
-	interface.  Since the destination is determined by the MAC
-	addresses involved, this mode works best in a "local" network
-	configuration (as described above), with destinations all on
-	the same local network.  This mode is likely to be suboptimal
-	if all your traffic is passed through a single router (i.e., a
-	"gatewayed" network configuration, as described above).
-
-	As with balance-rr, the switch ports need to be configured for
-	"etherchannel" or "trunking."
-
-broadcast: Like active-backup, there is not much advantage to this
-	mode in this type of network topology.
-
-802.3ad: This mode can be a good choice for this type of network
-	topology.  The 802.3ad mode is an IEEE standard, so all peers
-	that implement 802.3ad should interoperate well.  The 802.3ad
-	protocol includes automatic configuration of the aggregates,
-	so minimal manual configuration of the switch is needed
-	(typically only to designate that some set of devices is
-	available for 802.3ad).  The 802.3ad standard also mandates
-	that frames be delivered in order (within certain limits), so
-	in general single connections will not see misordering of
-	packets.  The 802.3ad mode does have some drawbacks: the
-	standard mandates that all devices in the aggregate operate at
-	the same speed and duplex.  Also, as with all bonding load
-	balance modes other than balance-rr, no single connection will
-	be able to utilize more than a single interface's worth of
-	bandwidth.  
-
-	Additionally, the linux bonding 802.3ad implementation
-	distributes traffic by peer (using an XOR of MAC addresses
-	and packet type ID), so in a "gatewayed" configuration, all
-	outgoing traffic will generally use the same device.  Incoming
-	traffic may also end up on a single device, but that is
-	dependent upon the balancing policy of the peer's 802.3ad
-	implementation.  In a "local" configuration, traffic will be
-	distributed across the devices in the bond.
-
-	Finally, the 802.3ad mode mandates the use of the MII monitor,
-	therefore, the ARP monitor is not available in this mode.
-
-balance-tlb: The balance-tlb mode balances outgoing traffic by peer.
-	Since the balancing is done according to MAC address, in a
-	"gatewayed" configuration (as described above), this mode will
-	send all traffic across a single device.  However, in a
-	"local" network configuration, this mode balances multiple
-	local network peers across devices in a vaguely intelligent
-	manner (not a simple XOR as in balance-xor or 802.3ad mode),
-	so that mathematically unlucky MAC addresses (i.e., ones that
-	XOR to the same value) will not all "bunch up" on a single
-	interface.
-
-	Unlike 802.3ad, interfaces may be of differing speeds, and no
-	special switch configuration is required.  On the down side,
-	in this mode all incoming traffic arrives over a single
-	interface, this mode requires certain ethtool support in the
-	network device driver of the slave interfaces, and the ARP
-	monitor is not available.
-
-balance-alb: This mode is everything that balance-tlb is, and more.
-	It has all of the features (and restrictions) of balance-tlb,
-	and will also balance incoming traffic from local network
-	peers (as described in the Bonding Module Options section,
-	above).
-
-	The only additional down side to this mode is that the network
-	device driver must support changing the hardware address while
-	the device is open.
-
-12.1.2 MT Link Monitoring for Single Switch Topology
-----------------------------------------------------
-
-	The choice of link monitoring may largely depend upon which
-mode you choose to use.  The more advanced load balancing modes do not
-support the use of the ARP monitor, and are thus restricted to using
-the MII monitor (which does not provide as high a level of end to end
-assurance as the ARP monitor).
-
-12.2 Maximum Throughput in a Multiple Switch Topology
------------------------------------------------------
-
-	Multiple switches may be utilized to optimize for throughput
-when they are configured in parallel as part of an isolated network
-between two or more systems, for example:
-
-                       +-----------+
-                       |  Host A   | 
-                       +-+---+---+-+
-                         |   |   |
-                +--------+   |   +---------+
-                |            |             |
-         +------+---+  +-----+----+  +-----+----+
-         | Switch A |  | Switch B |  | Switch C |
-         +------+---+  +-----+----+  +-----+----+
-                |            |             |
-                +--------+   |   +---------+
-                         |   |   |
-                       +-+---+---+-+
-                       |  Host B   | 
-                       +-----------+
-
-	In this configuration, the switches are isolated from one
-another.  One reason to employ a topology such as this is for an
-isolated network with many hosts (a cluster configured for high
-performance, for example), using multiple smaller switches can be more
-cost effective than a single larger switch, e.g., on a network with 24
-hosts, three 24 port switches can be significantly less expensive than
-a single 72 port switch.
-
-	If access beyond the network is required, an individual host
-can be equipped with an additional network device connected to an
-external network; this host then additionally acts as a gateway.
-
-12.2.1 MT Bonding Mode Selection for Multiple Switch Topology
--------------------------------------------------------------
-
-	In actual practice, the bonding mode typically employed in
-configurations of this type is balance-rr.  Historically, in this
-network configuration, the usual caveats about out of order packet
-delivery are mitigated by the use of network adapters that do not do
-any kind of packet coalescing (via the use of NAPI, or because the
-device itself does not generate interrupts until some number of
-packets has arrived).  When employed in this fashion, the balance-rr
-mode allows individual connections between two hosts to effectively
-utilize greater than one interface's bandwidth.
-
-12.2.2 MT Link Monitoring for Multiple Switch Topology
-------------------------------------------------------
-
-	Again, in actual practice, the MII monitor is most often used
-in this configuration, as performance is given preference over
-availability.  The ARP monitor will function in this topology, but its
-advantages over the MII monitor are mitigated by the volume of probes
-needed as the number of systems involved grows (remember that each
-host in the network is configured with bonding).
-
-13. Switch Behavior Issues
-==========================
-
-13.1 Link Establishment and Failover Delays
--------------------------------------------
-
-	Some switches exhibit undesirable behavior with regard to the
-timing of link up and down reporting by the switch.
-
-	First, when a link comes up, some switches may indicate that
-the link is up (carrier available), but not pass traffic over the
-interface for some period of time.  This delay is typically due to
-some type of autonegotiation or routing protocol, but may also occur
-during switch initialization (e.g., during recovery after a switch
-failure).  If you find this to be a problem, specify an appropriate
-value to the updelay bonding module option to delay the use of the
-relevant interface(s).
-
-	Second, some switches may "bounce" the link state one or more
-times while a link is changing state.  This occurs most commonly while
-the switch is initializing.  Again, an appropriate updelay value may
-help.
-
-	Note that when a bonding interface has no active links, the
-driver will immediately reuse the first link that goes up, even if the
-updelay parameter has been specified (the updelay is ignored in this
-case).  If there are slave interfaces waiting for the updelay timeout
-to expire, the interface that first went into that state will be
-immediately reused.  This reduces down time of the network if the
-value of updelay has been overestimated, and since this occurs only in
-cases with no connectivity, there is no additional penalty for
-ignoring the updelay.
-
-	In addition to the concerns about switch timings, if your
-switches take a long time to go into backup mode, it may be desirable
-to not activate a backup interface immediately after a link goes down.
-Failover may be delayed via the downdelay bonding module option.
-
-13.2 Duplicated Incoming Packets
---------------------------------
-
-	NOTE: Starting with version 3.0.2, the bonding driver has logic to
-suppress duplicate packets, which should largely eliminate this problem.
-The following description is kept for reference.
-
-	It is not uncommon to observe a short burst of duplicated
-traffic when the bonding device is first used, or after it has been
-idle for some period of time.  This is most easily observed by issuing
-a "ping" to some other host on the network, and noticing that the
-output from ping flags duplicates (typically one per slave).
-
-	For example, on a bond in active-backup mode with five slaves
-all connected to one switch, the output may appear as follows:
-
-# ping -n 10.0.4.2
-PING 10.0.4.2 (10.0.4.2) from 10.0.3.10 : 56(84) bytes of data.
-64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.7 ms
-64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
-64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
-64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
-64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
-64 bytes from 10.0.4.2: icmp_seq=2 ttl=64 time=0.216 ms
-64 bytes from 10.0.4.2: icmp_seq=3 ttl=64 time=0.267 ms
-64 bytes from 10.0.4.2: icmp_seq=4 ttl=64 time=0.222 ms
-
-	This is not due to an error in the bonding driver, rather, it
-is a side effect of how many switches update their MAC forwarding
-tables.  Initially, the switch does not associate the MAC address in
-the packet with a particular switch port, and so it may send the
-traffic to all ports until its MAC forwarding table is updated.  Since
-the interfaces attached to the bond may occupy multiple ports on a
-single switch, when the switch (temporarily) floods the traffic to all
-ports, the bond device receives multiple copies of the same packet
-(one per slave device).
-
-	The duplicated packet behavior is switch dependent, some
-switches exhibit this, and some do not.  On switches that display this
-behavior, it can be induced by clearing the MAC forwarding table (on
-most Cisco switches, the privileged command "clear mac address-table
-dynamic" will accomplish this).
-
-14. Hardware Specific Considerations
-====================================
-
-	This section contains additional information for configuring
-bonding on specific hardware platforms, or for interfacing bonding
-with particular switches or other devices.
-
-14.1 IBM BladeCenter
---------------------
-
-	This applies to the JS20 and similar systems.
-
-	On the JS20 blades, the bonding driver supports only
-balance-rr, active-backup, balance-tlb and balance-alb modes.  This is
-largely due to the network topology inside the BladeCenter, detailed
-below.
-
-JS20 network adapter information
---------------------------------
-
-	All JS20s come with two Broadcom Gigabit Ethernet ports
-integrated on the planar (that's "motherboard" in IBM-speak).  In the
-BladeCenter chassis, the eth0 port of all JS20 blades is hard wired to
-I/O Module #1; similarly, all eth1 ports are wired to I/O Module #2.
-An add-on Broadcom daughter card can be installed on a JS20 to provide
-two more Gigabit Ethernet ports.  These ports, eth2 and eth3, are
-wired to I/O Modules 3 and 4, respectively.
-
-	Each I/O Module may contain either a switch or a passthrough
-module (which allows ports to be directly connected to an external
-switch).  Some bonding modes require a specific BladeCenter internal
-network topology in order to function; these are detailed below.
-
-	Additional BladeCenter-specific networking information can be
-found in two IBM Redbooks (www.ibm.com/redbooks):
-
-"IBM eServer BladeCenter Networking Options"
-"IBM eServer BladeCenter Layer 2-7 Network Switching"
-
-BladeCenter networking configuration
-------------------------------------
-
-	Because a BladeCenter can be configured in a very large number
-of ways, this discussion will be confined to describing basic
-configurations.
-
-	Normally, Ethernet Switch Modules (ESMs) are used in I/O
-modules 1 and 2.  In this configuration, the eth0 and eth1 ports of a
-JS20 will be connected to different internal switches (in the
-respective I/O modules).
-
-	A passthrough module (OPM or CPM, optical or copper,
-passthrough module) connects the I/O module directly to an external
-switch.  By using PMs in I/O module #1 and #2, the eth0 and eth1
-interfaces of a JS20 can be redirected to the outside world and
-connected to a common external switch.
-
-	Depending upon the mix of ESMs and PMs, the network will
-appear to bonding as either a single switch topology (all PMs) or as a
-multiple switch topology (one or more ESMs, zero or more PMs).  It is
-also possible to connect ESMs together, resulting in a configuration
-much like the example in "High Availability in a Multiple Switch
-Topology," above.
-
-Requirements for specific modes
--------------------------------
-
-	The balance-rr mode requires the use of passthrough modules
-for devices in the bond, all connected to an common external switch.
-That switch must be configured for "etherchannel" or "trunking" on the
-appropriate ports, as is usual for balance-rr.
-
-	The balance-alb and balance-tlb modes will function with
-either switch modules or passthrough modules (or a mix).  The only
-specific requirement for these modes is that all network interfaces
-must be able to reach all destinations for traffic sent over the
-bonding device (i.e., the network must converge at some point outside
-the BladeCenter).
-
-	The active-backup mode has no additional requirements.
-
-Link monitoring issues
-----------------------
-
-	When an Ethernet Switch Module is in place, only the ARP
-monitor will reliably detect link loss to an external switch.  This is
-nothing unusual, but examination of the BladeCenter cabinet would
-suggest that the "external" network ports are the ethernet ports for
-the system, when it fact there is a switch between these "external"
-ports and the devices on the JS20 system itself.  The MII monitor is
-only able to detect link failures between the ESM and the JS20 system.
-
-	When a passthrough module is in place, the MII monitor does
-detect failures to the "external" port, which is then directly
-connected to the JS20 system.
-
-Other concerns
---------------
-
-	The Serial Over LAN (SoL) link is established over the primary
-ethernet (eth0) only, therefore, any loss of link to eth0 will result
-in losing your SoL connection.  It will not fail over with other
-network traffic, as the SoL system is beyond the control of the
-bonding driver.
-
-	It may be desirable to disable spanning tree on the switch
-(either the internal Ethernet Switch Module, or an external switch) to
-avoid fail-over delay issues when using bonding.
-
-	
-15. Frequently Asked Questions
-==============================
-
-1.  Is it SMP safe?
-
-	Yes. The old 2.0.xx channel bonding patch was not SMP safe.
-The new driver was designed to be SMP safe from the start.
-
-2.  What type of cards will work with it?
-
-	Any Ethernet type cards (you can even mix cards - a Intel
-EtherExpress PRO/100 and a 3com 3c905b, for example).  For most modes,
-devices need not be of the same speed.
-
-	Starting with version 3.2.1, bonding also supports Infiniband
-slaves in active-backup mode.
-
-3.  How many bonding devices can I have?
-
-	There is no limit.
-
-4.  How many slaves can a bonding device have?
-
-	This is limited only by the number of network interfaces Linux
-supports and/or the number of network cards you can place in your
-system.
-
-5.  What happens when a slave link dies?
-
-	If link monitoring is enabled, then the failing device will be
-disabled.  The active-backup mode will fail over to a backup link, and
-other modes will ignore the failed link.  The link will continue to be
-monitored, and should it recover, it will rejoin the bond (in whatever
-manner is appropriate for the mode). See the sections on High
-Availability and the documentation for each mode for additional
-information.
-	
-	Link monitoring can be enabled via either the miimon or
-arp_interval parameters (described in the module parameters section,
-above).  In general, miimon monitors the carrier state as sensed by
-the underlying network device, and the arp monitor (arp_interval)
-monitors connectivity to another host on the local network.
-
-	If no link monitoring is configured, the bonding driver will
-be unable to detect link failures, and will assume that all links are
-always available.  This will likely result in lost packets, and a
-resulting degradation of performance.  The precise performance loss
-depends upon the bonding mode and network configuration.
-
-6.  Can bonding be used for High Availability?
-
-	Yes.  See the section on High Availability for details.
-
-7.  Which switches/systems does it work with?
-
-	The full answer to this depends upon the desired mode.
-
-	In the basic balance modes (balance-rr and balance-xor), it
-works with any system that supports etherchannel (also called
-trunking).  Most managed switches currently available have such
-support, and many unmanaged switches as well.
-
-	The advanced balance modes (balance-tlb and balance-alb) do
-not have special switch requirements, but do need device drivers that
-support specific features (described in the appropriate section under
-module parameters, above).
-
-	In 802.3ad mode, it works with systems that support IEEE
-802.3ad Dynamic Link Aggregation.  Most managed and many unmanaged
-switches currently available support 802.3ad.
-
-        The active-backup mode should work with any Layer-II switch.
-
-8.  Where does a bonding device get its MAC address from?
-
-	When using slave devices that have fixed MAC addresses, or when
-the fail_over_mac option is enabled, the bonding device's MAC address is
-the MAC address of the active slave.
-
-	For other configurations, if not explicitly configured (with
-ifconfig or ip link), the MAC address of the bonding device is taken from
-its first slave device.  This MAC address is then passed to all following
-slaves and remains persistent (even if the first slave is removed) until
-the bonding device is brought down or reconfigured.
-
-	If you wish to change the MAC address, you can set it with
-ifconfig or ip link:
-
-# ifconfig bond0 hw ether 00:11:22:33:44:55
-
-# ip link set bond0 address 66:77:88:99:aa:bb
-
-	The MAC address can be also changed by bringing down/up the
-device and then changing its slaves (or their order):
-
-# ifconfig bond0 down ; modprobe -r bonding
-# ifconfig bond0 .... up
-# ifenslave bond0 eth...
-
-	This method will automatically take the address from the next
-slave that is added.
-
-	To restore your slaves' MAC addresses, you need to detach them
-from the bond (`ifenslave -d bond0 eth0'). The bonding driver will
-then restore the MAC addresses that the slaves had before they were
-enslaved.
-
-16. Resources and Links
-=======================
-
-	The latest version of the bonding driver can be found in the latest
-version of the linux kernel, found on http://kernel.org
-
-	The latest version of this document can be found in the latest kernel
-source (named Documentation/networking/bonding.txt).
-
-	Discussions regarding the usage of the bonding driver take place on the
-bonding-devel mailing list, hosted at sourceforge.net. If you have questions or
-problems, post them to the list.  The list address is:
-
-bonding-devel@lists.sourceforge.net
-
-	The administrative interface (to subscribe or unsubscribe) can
-be found at:
-
-https://lists.sourceforge.net/lists/listinfo/bonding-devel
-
-	Discussions regarding the development of the bonding driver take place
-on the main Linux network mailing list, hosted at vger.kernel.org. The list
-address is:
-
-netdev@vger.kernel.org
-
-	The administrative interface (to subscribe or unsubscribe) can
-be found at:
-
-http://vger.kernel.org/vger-lists.html#netdev
-
-Donald Becker's Ethernet Drivers and diag programs may be found at :
- - http://web.archive.org/web/*/http://www.scyld.com/network/ 
-
-You will also find a lot of information regarding Ethernet, NWay, MII,
-etc. at www.scyld.com.
-
--- END --
diff --git a/Documentation/networking/caif/Linux-CAIF.txt b/Documentation/networking/caif/Linux-CAIF.txt
deleted file mode 100644
index 0aa4bd381bec..000000000000
--- a/Documentation/networking/caif/Linux-CAIF.txt
+++ /dev/null
@@ -1,175 +0,0 @@
-Linux CAIF
-===========
-copyright (C) ST-Ericsson AB 2010
-Author: Sjur Brendeland/ sjur.brandeland@stericsson.com
-License terms: GNU General Public License (GPL) version 2
-
-
-Introduction
-------------
-CAIF is a MUX protocol used by ST-Ericsson cellular modems for
-communication between Modem and host. The host processes can open virtual AT
-channels, initiate GPRS Data connections, Video channels and Utility Channels.
-The Utility Channels are general purpose pipes between modem and host.
-
-ST-Ericsson modems support a number of transports between modem
-and host. Currently, UART and Loopback are available for Linux.
-
-
-Architecture:
-------------
-The implementation of CAIF is divided into:
-* CAIF Socket Layer and GPRS IP Interface.
-* CAIF Core Protocol Implementation
-* CAIF Link Layer, implemented as NET devices.
-
-
-  RTNL
-   !
-   !	      +------+	 +------+
-   !	     +------+!	+------+!
-   !	     !	IP  !!	!Socket!!
-   +-------> !interf!+	! API  !+	<- CAIF Client APIs
-   !	     +------+	+------!
-   !		!	    !
-   !		+-----------+
-   !		      !
-   !		   +------+		<- CAIF Core Protocol
-   !		   ! CAIF !
-   !		   ! Core !
-   !		   +------+
-   !	   +----------!---------+
-   !	   !	      !		!
-   !	+------+   +-----+   +------+
-   +--> ! HSI  !   ! TTY !   ! USB  !	<- Link Layer (Net Devices)
-	+------+   +-----+   +------+
-
-
-
-I M P L E M E N T A T I O N
-===========================
-
-
-CAIF Core Protocol Layer
-=========================================
-
-CAIF Core layer implements the CAIF protocol as defined by ST-Ericsson.
-It implements the CAIF protocol stack in a layered approach, where
-each layer described in the specification is implemented as a separate layer.
-The architecture is inspired by the design patterns "Protocol Layer" and
-"Protocol Packet".
-
-== CAIF structure ==
-The Core CAIF implementation contains:
-      -	Simple implementation of CAIF.
-      -	Layered architecture (a la Streams), each layer in the CAIF
-	specification is implemented in a separate c-file.
-      -	Clients must call configuration function to add PHY layer.
-      -	Clients must implement CAIF layer to consume/produce
-	CAIF payload with receive and transmit functions.
-      -	Clients must call configuration function to add and connect the
-	Client layer.
-      - When receiving / transmitting CAIF Packets (cfpkt), ownership is passed
-	to the called function (except for framing layers' receive function)
-
-Layered Architecture
---------------------
-The CAIF protocol can be divided into two parts: Support functions and Protocol
-Implementation. The support functions include:
-
-      - CFPKT CAIF Packet. Implementation of CAIF Protocol Packet. The
-	CAIF Packet has functions for creating, destroying and adding content
-	and for adding/extracting header and trailers to protocol packets.
-
-The CAIF Protocol implementation contains:
-
-      - CFCNFG CAIF Configuration layer. Configures the CAIF Protocol
-	Stack and provides a Client interface for adding Link-Layer and
-	Driver interfaces on top of the CAIF Stack.
-
-      - CFCTRL CAIF Control layer. Encodes and Decodes control messages
-	such as enumeration and channel setup. Also matches request and
-	response messages.
-
-      - CFSERVL General CAIF Service Layer functionality; handles flow
-	control and remote shutdown requests.
-
-      - CFVEI CAIF VEI layer. Handles CAIF AT Channels on VEI (Virtual
-	External Interface). This layer encodes/decodes VEI frames.
-
-      - CFDGML CAIF Datagram layer. Handles CAIF Datagram layer (IP
-	traffic), encodes/decodes Datagram frames.
-
-      - CFMUX CAIF Mux layer. Handles multiplexing between multiple
-	physical bearers and multiple channels such as VEI, Datagram, etc.
-	The MUX keeps track of the existing CAIF Channels and
-	Physical Instances and selects the appropriate instance based
-	on Channel-Id and Physical-ID.
-
-      - CFFRML CAIF Framing layer. Handles Framing i.e. Frame length
-	and frame checksum.
-
-      - CFSERL CAIF Serial layer. Handles concatenation/split of frames
-	into CAIF Frames with correct length.
-
-
-
-		    +---------+
-		    | Config  |
-		    | CFCNFG  |
-		    +---------+
-			 !
-    +---------+	    +---------+	    +---------+
-    |	AT    |	    | Control |	    | Datagram|
-    | CFVEIL  |	    | CFCTRL  |	    | CFDGML  |
-    +---------+	    +---------+	    +---------+
-	   \_____________!______________/
-			 !
-		    +---------+
-		    |	MUX   |
-		    |	      |
-		    +---------+
-		    _____!_____
-		   /	       \
-	    +---------+	    +---------+
-	    | CFFRML  |	    | CFFRML  |
-	    | Framing |	    | Framing |
-	    +---------+	    +---------+
-		 !		!
-	    +---------+	    +---------+
-	    |	      |	    | Serial  |
-	    |	      |	    | CFSERL  |
-	    +---------+	    +---------+
-
-
-In this layered approach the following "rules" apply.
-      - All layers embed the same structure "struct cflayer"
-      - A layer does not depend on any other layer's private data.
-      - Layers are stacked by setting the pointers
-		  layer->up , layer->dn
-      -	In order to send data upwards, each layer should do
-		 layer->up->receive(layer->up, packet);
-      - In order to send data downwards, each layer should do
-		 layer->dn->transmit(layer->dn, packet);
-
-
-CAIF Socket and IP interface
-===========================
-
-The IP interface and CAIF socket API are implemented on top of the
-CAIF Core protocol. The IP Interface and CAIF socket have an instance of
-'struct cflayer', just like the CAIF Core protocol stack.
-Net device and Socket implement the 'receive()' function defined by
-'struct cflayer', just like the rest of the CAIF stack. In this way, transmit and
-receive of packets is handled as by the rest of the layers: the 'dn->transmit()'
-function is called in order to transmit data.
-
-Configuration of Link Layer
----------------------------
-The Link Layer is implemented as Linux network devices (struct net_device).
-Payload handling and registration is done using standard Linux mechanisms.
-
-The CAIF Protocol relies on a loss-less link layer without implementing
-retransmission. This implies that packet drops must not happen.
-Therefore a flow-control mechanism is implemented where the physical
-interface can initiate flow stop for all CAIF Channels.
diff --git a/Documentation/networking/caif/caif.rst b/Documentation/networking/caif/caif.rst
index 07afc8063d4d..a07213030ccf 100644
--- a/Documentation/networking/caif/caif.rst
+++ b/Documentation/networking/caif/caif.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 .. SPDX-License-Identifier: GPL-2.0
 .. include:: <isonum.txt>
 
diff --git a/Documentation/networking/caif/index.rst b/Documentation/networking/caif/index.rst
new file mode 100644
index 000000000000..86e5b7832ec3
--- /dev/null
+++ b/Documentation/networking/caif/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+CAIF
+====
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   linux_caif
+   caif
+   spi_porting
diff --git a/Documentation/networking/caif/linux_caif.rst b/Documentation/networking/caif/linux_caif.rst
new file mode 100644
index 000000000000..a0480862ab8c
--- /dev/null
+++ b/Documentation/networking/caif/linux_caif.rst
@@ -0,0 +1,195 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+==========
+Linux CAIF
+==========
+
+Copyright |copy| ST-Ericsson AB 2010
+
+:Author: Sjur Brendeland/ sjur.brandeland@stericsson.com
+:License terms: GNU General Public License (GPL) version 2
+
+
+Introduction
+============
+
+CAIF is a MUX protocol used by ST-Ericsson cellular modems for
+communication between Modem and host. The host processes can open virtual AT
+channels, initiate GPRS Data connections, Video channels and Utility Channels.
+The Utility Channels are general purpose pipes between modem and host.
+
+ST-Ericsson modems support a number of transports between modem
+and host. Currently, UART and Loopback are available for Linux.
+
+
+Architecture
+============
+
+The implementation of CAIF is divided into:
+
+* CAIF Socket Layer and GPRS IP Interface.
+* CAIF Core Protocol Implementation
+* CAIF Link Layer, implemented as NET devices.
+
+::
+
+  RTNL
+   !
+   !	      +------+	 +------+
+   !	     +------+!	+------+!
+   !	     !	IP  !!	!Socket!!
+   +-------> !interf!+	! API  !+	<- CAIF Client APIs
+   !	     +------+	+------!
+   !		!	    !
+   !		+-----------+
+   !		      !
+   !		   +------+		<- CAIF Core Protocol
+   !		   ! CAIF !
+   !		   ! Core !
+   !		   +------+
+   !	   +----------!---------+
+   !	   !	      !		!
+   !	+------+   +-----+   +------+
+   +--> ! HSI  !   ! TTY !   ! USB  !	<- Link Layer (Net Devices)
+	+------+   +-----+   +------+
+
+
+
+Implementation
+==============
+
+
+CAIF Core Protocol Layer
+------------------------
+
+CAIF Core layer implements the CAIF protocol as defined by ST-Ericsson.
+It implements the CAIF protocol stack in a layered approach, where
+each layer described in the specification is implemented as a separate layer.
+The architecture is inspired by the design patterns "Protocol Layer" and
+"Protocol Packet".
+
+CAIF structure
+^^^^^^^^^^^^^^
+
+The Core CAIF implementation contains:
+
+      -	Simple implementation of CAIF.
+      -	Layered architecture (a la Streams), each layer in the CAIF
+	specification is implemented in a separate c-file.
+      -	Clients must call configuration function to add PHY layer.
+      -	Clients must implement CAIF layer to consume/produce
+	CAIF payload with receive and transmit functions.
+      -	Clients must call configuration function to add and connect the
+	Client layer.
+      - When receiving / transmitting CAIF Packets (cfpkt), ownership is passed
+	to the called function (except for framing layers' receive function)
+
+Layered Architecture
+====================
+
+The CAIF protocol can be divided into two parts: Support functions and Protocol
+Implementation. The support functions include:
+
+      - CFPKT CAIF Packet. Implementation of CAIF Protocol Packet. The
+	CAIF Packet has functions for creating, destroying and adding content
+	and for adding/extracting header and trailers to protocol packets.
+
+The CAIF Protocol implementation contains:
+
+      - CFCNFG CAIF Configuration layer. Configures the CAIF Protocol
+	Stack and provides a Client interface for adding Link-Layer and
+	Driver interfaces on top of the CAIF Stack.
+
+      - CFCTRL CAIF Control layer. Encodes and Decodes control messages
+	such as enumeration and channel setup. Also matches request and
+	response messages.
+
+      - CFSERVL General CAIF Service Layer functionality; handles flow
+	control and remote shutdown requests.
+
+      - CFVEI CAIF VEI layer. Handles CAIF AT Channels on VEI (Virtual
+	External Interface). This layer encodes/decodes VEI frames.
+
+      - CFDGML CAIF Datagram layer. Handles CAIF Datagram layer (IP
+	traffic), encodes/decodes Datagram frames.
+
+      - CFMUX CAIF Mux layer. Handles multiplexing between multiple
+	physical bearers and multiple channels such as VEI, Datagram, etc.
+	The MUX keeps track of the existing CAIF Channels and
+	Physical Instances and selects the appropriate instance based
+	on Channel-Id and Physical-ID.
+
+      - CFFRML CAIF Framing layer. Handles Framing i.e. Frame length
+	and frame checksum.
+
+      - CFSERL CAIF Serial layer. Handles concatenation/split of frames
+	into CAIF Frames with correct length.
+
+::
+
+		    +---------+
+		    | Config  |
+		    | CFCNFG  |
+		    +---------+
+			 !
+    +---------+	    +---------+	    +---------+
+    |	AT    |	    | Control |	    | Datagram|
+    | CFVEIL  |	    | CFCTRL  |	    | CFDGML  |
+    +---------+	    +---------+	    +---------+
+	   \_____________!______________/
+			 !
+		    +---------+
+		    |	MUX   |
+		    |	      |
+		    +---------+
+		    _____!_____
+		   /	       \
+	    +---------+	    +---------+
+	    | CFFRML  |	    | CFFRML  |
+	    | Framing |	    | Framing |
+	    +---------+	    +---------+
+		 !		!
+	    +---------+	    +---------+
+	    |	      |	    | Serial  |
+	    |	      |	    | CFSERL  |
+	    +---------+	    +---------+
+
+
+In this layered approach the following "rules" apply.
+
+      - All layers embed the same structure "struct cflayer"
+      - A layer does not depend on any other layer's private data.
+      - Layers are stacked by setting the pointers::
+
+		  layer->up , layer->dn
+
+      -	In order to send data upwards, each layer should do::
+
+		 layer->up->receive(layer->up, packet);
+
+      - In order to send data downwards, each layer should do::
+
+		 layer->dn->transmit(layer->dn, packet);
+
+
+CAIF Socket and IP interface
+============================
+
+The IP interface and CAIF socket API are implemented on top of the
+CAIF Core protocol. The IP Interface and CAIF socket have an instance of
+'struct cflayer', just like the CAIF Core protocol stack.
+Net device and Socket implement the 'receive()' function defined by
+'struct cflayer', just like the rest of the CAIF stack. In this way, transmit and
+receive of packets is handled as by the rest of the layers: the 'dn->transmit()'
+function is called in order to transmit data.
+
+Configuration of Link Layer
+---------------------------
+The Link Layer is implemented as Linux network devices (struct net_device).
+Payload handling and registration is done using standard Linux mechanisms.
+
+The CAIF Protocol relies on a loss-less link layer without implementing
+retransmission. This implies that packet drops must not happen.
+Therefore a flow-control mechanism is implemented where the physical
+interface can initiate flow stop for all CAIF Channels.
diff --git a/Documentation/networking/caif/spi_porting.rst b/Documentation/networking/caif/spi_porting.rst
new file mode 100644
index 000000000000..d49f874b20ac
--- /dev/null
+++ b/Documentation/networking/caif/spi_porting.rst
@@ -0,0 +1,229 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+CAIF SPI porting
+================
+
+CAIF SPI basics
+===============
+
+Running CAIF over SPI needs some extra setup, owing to the nature of SPI.
+Two extra GPIOs have been added in order to negotiate the transfers
+between the master and the slave. The minimum requirement for running
+CAIF over SPI is a SPI slave chip and two GPIOs (more details below).
+Please note that running as a slave implies that you need to keep up
+with the master clock. An overrun or underrun event is fatal.
+
+CAIF SPI framework
+==================
+
+To make porting as easy as possible, the CAIF SPI has been divided in
+two parts. The first part (called the interface part) deals with all
+generic functionality such as length framing, SPI frame negotiation
+and SPI frame delivery and transmission. The other part is the CAIF
+SPI slave device part, which is the module that you have to write if
+you want to run SPI CAIF on a new hardware. This part takes care of
+the physical hardware, both with regard to SPI and to GPIOs.
+
+- Implementing a CAIF SPI device:
+
+	- Functionality provided by the CAIF SPI slave device:
+
+	In order to implement a SPI device you will, as a minimum,
+	need to implement the following
+	functions:
+
+	::
+
+	    int (*init_xfer) (struct cfspi_xfer * xfer, struct cfspi_dev *dev):
+
+	This function is called by the CAIF SPI interface to give
+	you a chance to set up your hardware to be ready to receive
+	a stream of data from the master. The xfer structure contains
+	both physical and logical addresses, as well as the total length
+	of the transfer in both directions.The dev parameter can be used
+	to map to different CAIF SPI slave devices.
+
+	::
+
+	    void (*sig_xfer) (bool xfer, struct cfspi_dev *dev):
+
+	This function is called by the CAIF SPI interface when the output
+	(SPI_INT) GPIO needs to change state. The boolean value of the xfer
+	variable indicates whether the GPIO should be asserted (HIGH) or
+	deasserted (LOW). The dev parameter can be used to map to different CAIF
+	SPI slave devices.
+
+	- Functionality provided by the CAIF SPI interface:
+
+	::
+
+	    void (*ss_cb) (bool assert, struct cfspi_ifc *ifc);
+
+	This function is called by the CAIF SPI slave device in order to
+	signal a change of state of the input GPIO (SS) to the interface.
+	Only active edges are mandatory to be reported.
+	This function can be called from IRQ context (recommended in order
+	not to introduce latency). The ifc parameter should be the pointer
+	returned from the platform probe function in the SPI device structure.
+
+	::
+
+	    void (*xfer_done_cb) (struct cfspi_ifc *ifc);
+
+	This function is called by the CAIF SPI slave device in order to
+	report that a transfer is completed. This function should only be
+	called once both the transmission and the reception are completed.
+	This function can be called from IRQ context (recommended in order
+	not to introduce latency). The ifc parameter should be the pointer
+	returned from the platform probe function in the SPI device structure.
+
+	- Connecting the bits and pieces:
+
+		- Filling in the SPI slave device structure:
+
+		  Connect the necessary callback functions.
+
+		  Indicate clock speed (used to calculate toggle delays).
+
+		  Chose a suitable name (helps debugging if you use several CAIF
+		  SPI slave devices).
+
+		  Assign your private data (can be used to map to your
+		  structure).
+
+		- Filling in the SPI slave platform device structure:
+
+		  Add name of driver to connect to ("cfspi_sspi").
+
+		  Assign the SPI slave device structure as platform data.
+
+Padding
+=======
+
+In order to optimize throughput, a number of SPI padding options are provided.
+Padding can be enabled independently for uplink and downlink transfers.
+Padding can be enabled for the head, the tail and for the total frame size.
+The padding needs to be correctly configured on both sides of the link.
+The padding can be changed via module parameters in cfspi_sspi.c or via
+the sysfs directory of the cfspi_sspi driver (before device registration).
+
+- CAIF SPI device template::
+
+    /*
+    *	Copyright (C) ST-Ericsson AB 2010
+    *	Author: Daniel Martensson / Daniel.Martensson@stericsson.com
+    *	License terms: GNU General Public License (GPL), version 2.
+    *
+    */
+
+    #include <linux/init.h>
+    #include <linux/module.h>
+    #include <linux/device.h>
+    #include <linux/wait.h>
+    #include <linux/interrupt.h>
+    #include <linux/dma-mapping.h>
+    #include <net/caif/caif_spi.h>
+
+    MODULE_LICENSE("GPL");
+
+    struct sspi_struct {
+	    struct cfspi_dev sdev;
+	    struct cfspi_xfer *xfer;
+    };
+
+    static struct sspi_struct slave;
+    static struct platform_device slave_device;
+
+    static irqreturn_t sspi_irq(int irq, void *arg)
+    {
+	    /* You only need to trigger on an edge to the active state of the
+	    * SS signal. Once a edge is detected, the ss_cb() function should be
+	    * called with the parameter assert set to true. It is OK
+	    * (and even advised) to call the ss_cb() function in IRQ context in
+	    * order not to add any delay. */
+
+	    return IRQ_HANDLED;
+    }
+
+    static void sspi_complete(void *context)
+    {
+	    /* Normally the DMA or the SPI framework will call you back
+	    * in something similar to this. The only thing you need to
+	    * do is to call the xfer_done_cb() function, providing the pointer
+	    * to the CAIF SPI interface. It is OK to call this function
+	    * from IRQ context. */
+    }
+
+    static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev)
+    {
+	    /* Store transfer info. For a normal implementation you should
+	    * set up your DMA here and make sure that you are ready to
+	    * receive the data from the master SPI. */
+
+	    struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
+
+	    sspi->xfer = xfer;
+
+	    return 0;
+    }
+
+    void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev)
+    {
+	    /* If xfer is true then you should assert the SPI_INT to indicate to
+	    * the master that you are ready to receive the data from the master
+	    * SPI. If xfer is false then you should de-assert SPI_INT to indicate
+	    * that the transfer is done.
+	    */
+
+	    struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
+    }
+
+    static void sspi_release(struct device *dev)
+    {
+	    /*
+	    * Here you should release your SPI device resources.
+	    */
+    }
+
+    static int __init sspi_init(void)
+    {
+	    /* Here you should initialize your SPI device by providing the
+	    * necessary functions, clock speed, name and private data. Once
+	    * done, you can register your device with the
+	    * platform_device_register() function. This function will return
+	    * with the CAIF SPI interface initialized. This is probably also
+	    * the place where you should set up your GPIOs, interrupts and SPI
+	    * resources. */
+
+	    int res = 0;
+
+	    /* Initialize slave device. */
+	    slave.sdev.init_xfer = sspi_init_xfer;
+	    slave.sdev.sig_xfer = sspi_sig_xfer;
+	    slave.sdev.clk_mhz = 13;
+	    slave.sdev.priv = &slave;
+	    slave.sdev.name = "spi_sspi";
+	    slave_device.dev.release = sspi_release;
+
+	    /* Initialize platform device. */
+	    slave_device.name = "cfspi_sspi";
+	    slave_device.dev.platform_data = &slave.sdev;
+
+	    /* Register platform device. */
+	    res = platform_device_register(&slave_device);
+	    if (res) {
+		    printk(KERN_WARNING "sspi_init: failed to register dev.\n");
+		    return -ENODEV;
+	    }
+
+	    return res;
+    }
+
+    static void __exit sspi_exit(void)
+    {
+	    platform_device_del(&slave_device);
+    }
+
+    module_init(sspi_init);
+    module_exit(sspi_exit);
diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt
deleted file mode 100644
index 9efd0687dc4c..000000000000
--- a/Documentation/networking/caif/spi_porting.txt
+++ /dev/null
@@ -1,208 +0,0 @@
-- CAIF SPI porting -
-
-- CAIF SPI basics:
-
-Running CAIF over SPI needs some extra setup, owing to the nature of SPI.
-Two extra GPIOs have been added in order to negotiate the transfers
- between the master and the slave. The minimum requirement for running
-CAIF over SPI is a SPI slave chip and two GPIOs (more details below).
-Please note that running as a slave implies that you need to keep up
-with the master clock. An overrun or underrun event is fatal.
-
-- CAIF SPI framework:
-
-To make porting as easy as possible, the CAIF SPI has been divided in
-two parts. The first part (called the interface part) deals with all
-generic functionality such as length framing, SPI frame negotiation
-and SPI frame delivery and transmission. The other part is the CAIF
-SPI slave device part, which is the module that you have to write if
-you want to run SPI CAIF on a new hardware. This part takes care of
-the physical hardware, both with regard to SPI and to GPIOs.
-
-- Implementing a CAIF SPI device:
-
-	- Functionality provided by the CAIF SPI slave device:
-
-	In order to implement a SPI device you will, as a minimum,
-	need to implement the following
-	functions:
-
-	int (*init_xfer) (struct cfspi_xfer * xfer, struct cfspi_dev *dev):
-
-	This function is called by the CAIF SPI interface to give
-	you a chance to set up your hardware to be ready to receive
-	a stream of data from the master. The xfer structure contains
-	both physical and logical addresses, as well as the total length
-	of the transfer in both directions.The dev parameter can be used
-	to map to different CAIF SPI slave devices.
-
-	void (*sig_xfer) (bool xfer, struct cfspi_dev *dev):
-
-	This function is called by the CAIF SPI interface when the output
-	(SPI_INT) GPIO needs to change state. The boolean value of the xfer
-	variable indicates whether the GPIO should be asserted (HIGH) or
-	deasserted (LOW). The dev parameter can be used to map to different CAIF
-	SPI slave devices.
-
-	- Functionality provided by the CAIF SPI interface:
-
-	void (*ss_cb) (bool assert, struct cfspi_ifc *ifc);
-
-	This function is called by the CAIF SPI slave device in order to
-	signal a change of state of the input GPIO (SS) to the interface.
-	Only active edges are mandatory to be reported.
-	This function can be called from IRQ context (recommended in order
-	not to introduce latency). The ifc parameter should be the pointer
-	returned from the platform probe function in the SPI device structure.
-
-	void (*xfer_done_cb) (struct cfspi_ifc *ifc);
-
-	This function is called by the CAIF SPI slave device in order to
-	report that a transfer is completed. This function should only be
-	called once both the transmission and the reception are completed.
-	This function can be called from IRQ context (recommended in order
-	not to introduce latency). The ifc parameter should be the pointer
-	returned from the platform probe function in the SPI device structure.
-
-	- Connecting the bits and pieces:
-
-		- Filling in the SPI slave device structure:
-
-		Connect the necessary callback functions.
-		Indicate clock speed (used to calculate toggle delays).
-		Chose a suitable name (helps debugging if you use several CAIF
-		SPI slave devices).
-		Assign your private data (can be used to map to your structure).
-
-		- Filling in the SPI slave platform device structure:
-		Add name of driver to connect to ("cfspi_sspi").
-		Assign the SPI slave device structure as platform data.
-
-- Padding:
-
-In order to optimize throughput, a number of SPI padding options are provided.
-Padding can be enabled independently for uplink and downlink transfers.
-Padding can be enabled for the head, the tail and for the total frame size.
-The padding needs to be correctly configured on both sides of the link.
-The padding can be changed via module parameters in cfspi_sspi.c or via
-the sysfs directory of the cfspi_sspi driver (before device registration).
-
-- CAIF SPI device template:
-
-/*
- *	Copyright (C) ST-Ericsson AB 2010
- *	Author: Daniel Martensson / Daniel.Martensson@stericsson.com
- *	License terms: GNU General Public License (GPL), version 2.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <net/caif/caif_spi.h>
-
-MODULE_LICENSE("GPL");
-
-struct sspi_struct {
-	struct cfspi_dev sdev;
-	struct cfspi_xfer *xfer;
-};
-
-static struct sspi_struct slave;
-static struct platform_device slave_device;
-
-static irqreturn_t sspi_irq(int irq, void *arg)
-{
-	/* You only need to trigger on an edge to the active state of the
-	 * SS signal. Once a edge is detected, the ss_cb() function should be
-	 * called with the parameter assert set to true. It is OK
-	 * (and even advised) to call the ss_cb() function in IRQ context in
-	 * order not to add any delay. */
-
-	return IRQ_HANDLED;
-}
-
-static void sspi_complete(void *context)
-{
-	/* Normally the DMA or the SPI framework will call you back
-	 * in something similar to this. The only thing you need to
-	 * do is to call the xfer_done_cb() function, providing the pointer
-	 * to the CAIF SPI interface. It is OK to call this function
-	 * from IRQ context. */
-}
-
-static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev)
-{
-	/* Store transfer info. For a normal implementation you should
-	 * set up your DMA here and make sure that you are ready to
-	 * receive the data from the master SPI. */
-
-	struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
-
-	sspi->xfer = xfer;
-
-	return 0;
-}
-
-void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev)
-{
-	/* If xfer is true then you should assert the SPI_INT to indicate to
-	 * the master that you are ready to receive the data from the master
-	 * SPI. If xfer is false then you should de-assert SPI_INT to indicate
-	 * that the transfer is done.
-	 */
-
-	struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
-}
-
-static void sspi_release(struct device *dev)
-{
-	/*
-	 * Here you should release your SPI device resources.
-	 */
-}
-
-static int __init sspi_init(void)
-{
-	/* Here you should initialize your SPI device by providing the
-	 * necessary functions, clock speed, name and private data. Once
-	 * done, you can register your device with the
-	 * platform_device_register() function. This function will return
-	 * with the CAIF SPI interface initialized. This is probably also
-	 * the place where you should set up your GPIOs, interrupts and SPI
-	 * resources. */
-
-	int res = 0;
-
-	/* Initialize slave device. */
-	slave.sdev.init_xfer = sspi_init_xfer;
-	slave.sdev.sig_xfer = sspi_sig_xfer;
-	slave.sdev.clk_mhz = 13;
-	slave.sdev.priv = &slave;
-	slave.sdev.name = "spi_sspi";
-	slave_device.dev.release = sspi_release;
-
-	/* Initialize platform device. */
-	slave_device.name = "cfspi_sspi";
-	slave_device.dev.platform_data = &slave.sdev;
-
-	/* Register platform device. */
-	res = platform_device_register(&slave_device);
-	if (res) {
-		printk(KERN_WARNING "sspi_init: failed to register dev.\n");
-		return -ENODEV;
-	}
-
-	return res;
-}
-
-static void __exit sspi_exit(void)
-{
-	platform_device_del(&slave_device);
-}
-
-module_init(sspi_init);
-module_exit(sspi_exit);
diff --git a/Documentation/networking/cdc_mbim.rst b/Documentation/networking/cdc_mbim.rst
new file mode 100644
index 000000000000..0048409c06b4
--- /dev/null
+++ b/Documentation/networking/cdc_mbim.rst
@@ -0,0 +1,355 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================================
+cdc_mbim - Driver for CDC MBIM Mobile Broadband modems
+======================================================
+
+The cdc_mbim driver supports USB devices conforming to the "Universal
+Serial Bus Communications Class Subclass Specification for Mobile
+Broadband Interface Model" [1], which is a further development of
+"Universal Serial Bus Communications Class Subclass Specifications for
+Network Control Model Devices" [2] optimized for Mobile Broadband
+devices, aka "3G/LTE modems".
+
+
+Command Line Parameters
+=======================
+
+The cdc_mbim driver has no parameters of its own.  But the probing
+behaviour for NCM 1.0 backwards compatible MBIM functions (an
+"NCM/MBIM function" as defined in section 3.2 of [1]) is affected
+by a cdc_ncm driver parameter:
+
+prefer_mbim
+-----------
+:Type:          Boolean
+:Valid Range:   N/Y (0-1)
+:Default Value: Y (MBIM is preferred)
+
+This parameter sets the system policy for NCM/MBIM functions.  Such
+functions will be handled by either the cdc_ncm driver or the cdc_mbim
+driver depending on the prefer_mbim setting.  Setting prefer_mbim=N
+makes the cdc_mbim driver ignore these functions and lets the cdc_ncm
+driver handle them instead.
+
+The parameter is writable, and can be changed at any time. A manual
+unbind/bind is required to make the change effective for NCM/MBIM
+functions bound to the "wrong" driver
+
+
+Basic usage
+===========
+
+MBIM functions are inactive when unmanaged. The cdc_mbim driver only
+provides a userspace interface to the MBIM control channel, and will
+not participate in the management of the function. This implies that a
+userspace MBIM management application always is required to enable a
+MBIM function.
+
+Such userspace applications includes, but are not limited to:
+
+ - mbimcli (included with the libmbim [3] library), and
+ - ModemManager [4]
+
+Establishing a MBIM IP session reequires at least these actions by the
+management application:
+
+ - open the control channel
+ - configure network connection settings
+ - connect to network
+ - configure IP interface
+
+Management application development
+----------------------------------
+The driver <-> userspace interfaces are described below.  The MBIM
+control channel protocol is described in [1].
+
+
+MBIM control channel userspace ABI
+==================================
+
+/dev/cdc-wdmX character device
+------------------------------
+The driver creates a two-way pipe to the MBIM function control channel
+using the cdc-wdm driver as a subdriver.  The userspace end of the
+control channel pipe is a /dev/cdc-wdmX character device.
+
+The cdc_mbim driver does not process or police messages on the control
+channel.  The channel is fully delegated to the userspace management
+application.  It is therefore up to this application to ensure that it
+complies with all the control channel requirements in [1].
+
+The cdc-wdmX device is created as a child of the MBIM control
+interface USB device.  The character device associated with a specific
+MBIM function can be looked up using sysfs.  For example::
+
+ bjorn@nemi:~$ ls /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc
+ cdc-wdm0
+
+ bjorn@nemi:~$ grep . /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc/cdc-wdm0/dev
+ 180:0
+
+
+USB configuration descriptors
+-----------------------------
+The wMaxControlMessage field of the CDC MBIM functional descriptor
+limits the maximum control message size. The managament application is
+responsible for negotiating a control message size complying with the
+requirements in section 9.3.1 of [1], taking this descriptor field
+into consideration.
+
+The userspace application can access the CDC MBIM functional
+descriptor of a MBIM function using either of the two USB
+configuration descriptor kernel interfaces described in [6] or [7].
+
+See also the ioctl documentation below.
+
+
+Fragmentation
+-------------
+The userspace application is responsible for all control message
+fragmentation and defragmentaion, as described in section 9.5 of [1].
+
+
+/dev/cdc-wdmX write()
+---------------------
+The MBIM control messages from the management application *must not*
+exceed the negotiated control message size.
+
+
+/dev/cdc-wdmX read()
+--------------------
+The management application *must* accept control messages of up the
+negotiated control message size.
+
+
+/dev/cdc-wdmX ioctl()
+---------------------
+IOCTL_WDM_MAX_COMMAND: Get Maximum Command Size
+This ioctl returns the wMaxControlMessage field of the CDC MBIM
+functional descriptor for MBIM devices.  This is intended as a
+convenience, eliminating the need to parse the USB descriptors from
+userspace.
+
+::
+
+	#include <stdio.h>
+	#include <fcntl.h>
+	#include <sys/ioctl.h>
+	#include <linux/types.h>
+	#include <linux/usb/cdc-wdm.h>
+	int main()
+	{
+		__u16 max;
+		int fd = open("/dev/cdc-wdm0", O_RDWR);
+		if (!ioctl(fd, IOCTL_WDM_MAX_COMMAND, &max))
+			printf("wMaxControlMessage is %d\n", max);
+	}
+
+
+Custom device services
+----------------------
+The MBIM specification allows vendors to freely define additional
+services.  This is fully supported by the cdc_mbim driver.
+
+Support for new MBIM services, including vendor specified services, is
+implemented entirely in userspace, like the rest of the MBIM control
+protocol
+
+New services should be registered in the MBIM Registry [5].
+
+
+
+MBIM data channel userspace ABI
+===============================
+
+wwanY network device
+--------------------
+The cdc_mbim driver represents the MBIM data channel as a single
+network device of the "wwan" type. This network device is initially
+mapped to MBIM IP session 0.
+
+
+Multiplexed IP sessions (IPS)
+-----------------------------
+MBIM allows multiplexing up to 256 IP sessions over a single USB data
+channel.  The cdc_mbim driver models such IP sessions as 802.1q VLAN
+subdevices of the master wwanY device, mapping MBIM IP session Z to
+VLAN ID Z for all values of Z greater than 0.
+
+The device maximum Z is given in the MBIM_DEVICE_CAPS_INFO structure
+described in section 10.5.1 of [1].
+
+The userspace management application is responsible for adding new
+VLAN links prior to establishing MBIM IP sessions where the SessionId
+is greater than 0. These links can be added by using the normal VLAN
+kernel interfaces, either ioctl or netlink.
+
+For example, adding a link for a MBIM IP session with SessionId 3::
+
+  ip link add link wwan0 name wwan0.3 type vlan id 3
+
+The driver will automatically map the "wwan0.3" network device to MBIM
+IP session 3.
+
+
+Device Service Streams (DSS)
+----------------------------
+MBIM also allows up to 256 non-IP data streams to be multiplexed over
+the same shared USB data channel.  The cdc_mbim driver models these
+sessions as another set of 802.1q VLAN subdevices of the master wwanY
+device, mapping MBIM DSS session A to VLAN ID (256 + A) for all values
+of A.
+
+The device maximum A is given in the MBIM_DEVICE_SERVICES_INFO
+structure described in section 10.5.29 of [1].
+
+The DSS VLAN subdevices are used as a practical interface between the
+shared MBIM data channel and a MBIM DSS aware userspace application.
+It is not intended to be presented as-is to an end user. The
+assumption is that a userspace application initiating a DSS session
+also takes care of the necessary framing of the DSS data, presenting
+the stream to the end user in an appropriate way for the stream type.
+
+The network device ABI requires a dummy ethernet header for every DSS
+data frame being transported.  The contents of this header is
+arbitrary, with the following exceptions:
+
+ - TX frames using an IP protocol (0x0800 or 0x86dd) will be dropped
+ - RX frames will have the protocol field set to ETH_P_802_3 (but will
+   not be properly formatted 802.3 frames)
+ - RX frames will have the destination address set to the hardware
+   address of the master device
+
+The DSS supporting userspace management application is responsible for
+adding the dummy ethernet header on TX and stripping it on RX.
+
+This is a simple example using tools commonly available, exporting
+DssSessionId 5 as a pty character device pointed to by a /dev/nmea
+symlink::
+
+  ip link add link wwan0 name wwan0.dss5 type vlan id 261
+  ip link set dev wwan0.dss5 up
+  socat INTERFACE:wwan0.dss5,type=2 PTY:,echo=0,link=/dev/nmea
+
+This is only an example, most suitable for testing out a DSS
+service. Userspace applications supporting specific MBIM DSS services
+are expected to use the tools and programming interfaces required by
+that service.
+
+Note that adding VLAN links for DSS sessions is entirely optional.  A
+management application may instead choose to bind a packet socket
+directly to the master network device, using the received VLAN tags to
+map frames to the correct DSS session and adding 18 byte VLAN ethernet
+headers with the appropriate tag on TX.  In this case using a socket
+filter is recommended, matching only the DSS VLAN subset. This avoid
+unnecessary copying of unrelated IP session data to userspace.  For
+example::
+
+  static struct sock_filter dssfilter[] = {
+	/* use special negative offsets to get VLAN tag */
+	BPF_STMT(BPF_LD|BPF_B|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG_PRESENT),
+	BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, 1, 0, 6), /* true */
+
+	/* verify DSS VLAN range */
+	BPF_STMT(BPF_LD|BPF_H|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG),
+	BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 256, 0, 4),	/* 256 is first DSS VLAN */
+	BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 512, 3, 0),	/* 511 is last DSS VLAN */
+
+	/* verify ethertype */
+	BPF_STMT(BPF_LD|BPF_H|BPF_ABS, 2 * ETH_ALEN),
+	BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, ETH_P_802_3, 0, 1),
+
+	BPF_STMT(BPF_RET|BPF_K, (u_int)-1),	/* accept */
+	BPF_STMT(BPF_RET|BPF_K, 0),		/* ignore */
+  };
+
+
+
+Tagged IP session 0 VLAN
+------------------------
+As described above, MBIM IP session 0 is treated as special by the
+driver.  It is initially mapped to untagged frames on the wwanY
+network device.
+
+This mapping implies a few restrictions on multiplexed IPS and DSS
+sessions, which may not always be practical:
+
+ - no IPS or DSS session can use a frame size greater than the MTU on
+   IP session 0
+ - no IPS or DSS session can be in the up state unless the network
+   device representing IP session 0 also is up
+
+These problems can be avoided by optionally making the driver map IP
+session 0 to a VLAN subdevice, similar to all other IP sessions.  This
+behaviour is triggered by adding a VLAN link for the magic VLAN ID
+4094.  The driver will then immediately start mapping MBIM IP session
+0 to this VLAN, and will drop untagged frames on the master wwanY
+device.
+
+Tip: It might be less confusing to the end user to name this VLAN
+subdevice after the MBIM SessionID instead of the VLAN ID.  For
+example::
+
+  ip link add link wwan0 name wwan0.0 type vlan id 4094
+
+
+VLAN mapping
+------------
+
+Summarizing the cdc_mbim driver mapping described above, we have this
+relationship between VLAN tags on the wwanY network device and MBIM
+sessions on the shared USB data channel::
+
+  VLAN ID       MBIM type   MBIM SessionID           Notes
+  ---------------------------------------------------------
+  untagged      IPS         0                        a)
+  1 - 255       IPS         1 - 255 <VLANID>
+  256 - 511     DSS         0 - 255 <VLANID - 256>
+  512 - 4093                                         b)
+  4094          IPS         0                        c)
+
+    a) if no VLAN ID 4094 link exists, else dropped
+    b) unsupported VLAN range, unconditionally dropped
+    c) if a VLAN ID 4094 link exists, else dropped
+
+
+
+
+References
+==========
+
+ 1) USB Implementers Forum, Inc. - "Universal Serial Bus
+    Communications Class Subclass Specification for Mobile Broadband
+    Interface Model", Revision 1.0 (Errata 1), May 1, 2013
+
+      - http://www.usb.org/developers/docs/devclass_docs/
+
+ 2) USB Implementers Forum, Inc. - "Universal Serial Bus
+    Communications Class Subclass Specifications for Network Control
+    Model Devices", Revision 1.0 (Errata 1), November 24, 2010
+
+      - http://www.usb.org/developers/docs/devclass_docs/
+
+ 3) libmbim - "a glib-based library for talking to WWAN modems and
+    devices which speak the Mobile Interface Broadband Model (MBIM)
+    protocol"
+
+      - http://www.freedesktop.org/wiki/Software/libmbim/
+
+ 4) ModemManager - "a DBus-activated daemon which controls mobile
+    broadband (2G/3G/4G) devices and connections"
+
+      - http://www.freedesktop.org/wiki/Software/ModemManager/
+
+ 5) "MBIM (Mobile Broadband Interface Model) Registry"
+
+       - http://compliance.usb.org/mbim/
+
+ 6) "/sys/kernel/debug/usb/devices output format"
+
+       - Documentation/driver-api/usb/usb.rst
+
+ 7) "/sys/bus/usb/devices/.../descriptors"
+
+       - Documentation/ABI/stable/sysfs-bus-usb
diff --git a/Documentation/networking/cdc_mbim.txt b/Documentation/networking/cdc_mbim.txt
deleted file mode 100644
index 4e68f0bc5dba..000000000000
--- a/Documentation/networking/cdc_mbim.txt
+++ /dev/null
@@ -1,339 +0,0 @@
-     cdc_mbim - Driver for CDC MBIM Mobile Broadband modems
-    ========================================================
-
-The cdc_mbim driver supports USB devices conforming to the "Universal
-Serial Bus Communications Class Subclass Specification for Mobile
-Broadband Interface Model" [1], which is a further development of
-"Universal Serial Bus Communications Class Subclass Specifications for
-Network Control Model Devices" [2] optimized for Mobile Broadband
-devices, aka "3G/LTE modems".
-
-
-Command Line Parameters
-=======================
-
-The cdc_mbim driver has no parameters of its own.  But the probing
-behaviour for NCM 1.0 backwards compatible MBIM functions (an
-"NCM/MBIM function" as defined in section 3.2 of [1]) is affected
-by a cdc_ncm driver parameter:
-
-prefer_mbim
------------
-Type:          Boolean
-Valid Range:   N/Y (0-1)
-Default Value: Y (MBIM is preferred)
-
-This parameter sets the system policy for NCM/MBIM functions.  Such
-functions will be handled by either the cdc_ncm driver or the cdc_mbim
-driver depending on the prefer_mbim setting.  Setting prefer_mbim=N
-makes the cdc_mbim driver ignore these functions and lets the cdc_ncm
-driver handle them instead.
-
-The parameter is writable, and can be changed at any time. A manual
-unbind/bind is required to make the change effective for NCM/MBIM
-functions bound to the "wrong" driver
-
-
-Basic usage
-===========
-
-MBIM functions are inactive when unmanaged. The cdc_mbim driver only
-provides a userspace interface to the MBIM control channel, and will
-not participate in the management of the function. This implies that a
-userspace MBIM management application always is required to enable a
-MBIM function.
-
-Such userspace applications includes, but are not limited to:
- - mbimcli (included with the libmbim [3] library), and
- - ModemManager [4]
-
-Establishing a MBIM IP session reequires at least these actions by the
-management application:
- - open the control channel
- - configure network connection settings
- - connect to network
- - configure IP interface
-
-Management application development
-----------------------------------
-The driver <-> userspace interfaces are described below.  The MBIM
-control channel protocol is described in [1].
-
-
-MBIM control channel userspace ABI
-==================================
-
-/dev/cdc-wdmX character device
-------------------------------
-The driver creates a two-way pipe to the MBIM function control channel
-using the cdc-wdm driver as a subdriver.  The userspace end of the
-control channel pipe is a /dev/cdc-wdmX character device.
-
-The cdc_mbim driver does not process or police messages on the control
-channel.  The channel is fully delegated to the userspace management
-application.  It is therefore up to this application to ensure that it
-complies with all the control channel requirements in [1].
-
-The cdc-wdmX device is created as a child of the MBIM control
-interface USB device.  The character device associated with a specific
-MBIM function can be looked up using sysfs.  For example:
-
- bjorn@nemi:~$ ls /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc
- cdc-wdm0
-
- bjorn@nemi:~$ grep . /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc/cdc-wdm0/dev
- 180:0
-
-
-USB configuration descriptors
------------------------------
-The wMaxControlMessage field of the CDC MBIM functional descriptor
-limits the maximum control message size. The managament application is
-responsible for negotiating a control message size complying with the
-requirements in section 9.3.1 of [1], taking this descriptor field
-into consideration.
-
-The userspace application can access the CDC MBIM functional
-descriptor of a MBIM function using either of the two USB
-configuration descriptor kernel interfaces described in [6] or [7].
-
-See also the ioctl documentation below.
-
-
-Fragmentation
--------------
-The userspace application is responsible for all control message
-fragmentation and defragmentaion, as described in section 9.5 of [1].
-
-
-/dev/cdc-wdmX write()
----------------------
-The MBIM control messages from the management application *must not*
-exceed the negotiated control message size.
-
-
-/dev/cdc-wdmX read()
---------------------
-The management application *must* accept control messages of up the
-negotiated control message size.
-
-
-/dev/cdc-wdmX ioctl()
---------------------
-IOCTL_WDM_MAX_COMMAND: Get Maximum Command Size
-This ioctl returns the wMaxControlMessage field of the CDC MBIM
-functional descriptor for MBIM devices.  This is intended as a
-convenience, eliminating the need to parse the USB descriptors from
-userspace.
-
-	#include <stdio.h>
-	#include <fcntl.h>
-	#include <sys/ioctl.h>
-	#include <linux/types.h>
-	#include <linux/usb/cdc-wdm.h>
-	int main()
-	{
-		__u16 max;
-		int fd = open("/dev/cdc-wdm0", O_RDWR);
-		if (!ioctl(fd, IOCTL_WDM_MAX_COMMAND, &max))
-			printf("wMaxControlMessage is %d\n", max);
-	}
-
-
-Custom device services
-----------------------
-The MBIM specification allows vendors to freely define additional
-services.  This is fully supported by the cdc_mbim driver.
-
-Support for new MBIM services, including vendor specified services, is
-implemented entirely in userspace, like the rest of the MBIM control
-protocol
-
-New services should be registered in the MBIM Registry [5].
-
-
-
-MBIM data channel userspace ABI
-===============================
-
-wwanY network device
---------------------
-The cdc_mbim driver represents the MBIM data channel as a single
-network device of the "wwan" type. This network device is initially
-mapped to MBIM IP session 0.
-
-
-Multiplexed IP sessions (IPS)
------------------------------
-MBIM allows multiplexing up to 256 IP sessions over a single USB data
-channel.  The cdc_mbim driver models such IP sessions as 802.1q VLAN
-subdevices of the master wwanY device, mapping MBIM IP session Z to
-VLAN ID Z for all values of Z greater than 0.
-
-The device maximum Z is given in the MBIM_DEVICE_CAPS_INFO structure
-described in section 10.5.1 of [1].
-
-The userspace management application is responsible for adding new
-VLAN links prior to establishing MBIM IP sessions where the SessionId
-is greater than 0. These links can be added by using the normal VLAN
-kernel interfaces, either ioctl or netlink.
-
-For example, adding a link for a MBIM IP session with SessionId 3:
-
-  ip link add link wwan0 name wwan0.3 type vlan id 3
-
-The driver will automatically map the "wwan0.3" network device to MBIM
-IP session 3.
-
-
-Device Service Streams (DSS)
-----------------------------
-MBIM also allows up to 256 non-IP data streams to be multiplexed over
-the same shared USB data channel.  The cdc_mbim driver models these
-sessions as another set of 802.1q VLAN subdevices of the master wwanY
-device, mapping MBIM DSS session A to VLAN ID (256 + A) for all values
-of A.
-
-The device maximum A is given in the MBIM_DEVICE_SERVICES_INFO
-structure described in section 10.5.29 of [1].
-
-The DSS VLAN subdevices are used as a practical interface between the
-shared MBIM data channel and a MBIM DSS aware userspace application.
-It is not intended to be presented as-is to an end user. The
-assumption is that a userspace application initiating a DSS session
-also takes care of the necessary framing of the DSS data, presenting
-the stream to the end user in an appropriate way for the stream type.
-
-The network device ABI requires a dummy ethernet header for every DSS
-data frame being transported.  The contents of this header is
-arbitrary, with the following exceptions:
- - TX frames using an IP protocol (0x0800 or 0x86dd) will be dropped
- - RX frames will have the protocol field set to ETH_P_802_3 (but will
-   not be properly formatted 802.3 frames)
- - RX frames will have the destination address set to the hardware
-   address of the master device
-
-The DSS supporting userspace management application is responsible for
-adding the dummy ethernet header on TX and stripping it on RX.
-
-This is a simple example using tools commonly available, exporting
-DssSessionId 5 as a pty character device pointed to by a /dev/nmea
-symlink:
-
-  ip link add link wwan0 name wwan0.dss5 type vlan id 261
-  ip link set dev wwan0.dss5 up
-  socat INTERFACE:wwan0.dss5,type=2 PTY:,echo=0,link=/dev/nmea
-
-This is only an example, most suitable for testing out a DSS
-service. Userspace applications supporting specific MBIM DSS services
-are expected to use the tools and programming interfaces required by
-that service.
-
-Note that adding VLAN links for DSS sessions is entirely optional.  A
-management application may instead choose to bind a packet socket
-directly to the master network device, using the received VLAN tags to
-map frames to the correct DSS session and adding 18 byte VLAN ethernet
-headers with the appropriate tag on TX.  In this case using a socket
-filter is recommended, matching only the DSS VLAN subset. This avoid
-unnecessary copying of unrelated IP session data to userspace.  For
-example:
-
-  static struct sock_filter dssfilter[] = {
-	/* use special negative offsets to get VLAN tag */
-	BPF_STMT(BPF_LD|BPF_B|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG_PRESENT),
-	BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, 1, 0, 6), /* true */
-
-	/* verify DSS VLAN range */
-	BPF_STMT(BPF_LD|BPF_H|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG),
-	BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 256, 0, 4),	/* 256 is first DSS VLAN */
-	BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 512, 3, 0),	/* 511 is last DSS VLAN */
-
-	/* verify ethertype */
-        BPF_STMT(BPF_LD|BPF_H|BPF_ABS, 2 * ETH_ALEN),
-        BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, ETH_P_802_3, 0, 1),
-
-        BPF_STMT(BPF_RET|BPF_K, (u_int)-1),	/* accept */
-        BPF_STMT(BPF_RET|BPF_K, 0),		/* ignore */
-  };
-
-
-
-Tagged IP session 0 VLAN
-------------------------
-As described above, MBIM IP session 0 is treated as special by the
-driver.  It is initially mapped to untagged frames on the wwanY
-network device.
-
-This mapping implies a few restrictions on multiplexed IPS and DSS
-sessions, which may not always be practical:
- - no IPS or DSS session can use a frame size greater than the MTU on
-   IP session 0
- - no IPS or DSS session can be in the up state unless the network
-   device representing IP session 0 also is up
-
-These problems can be avoided by optionally making the driver map IP
-session 0 to a VLAN subdevice, similar to all other IP sessions.  This
-behaviour is triggered by adding a VLAN link for the magic VLAN ID
-4094.  The driver will then immediately start mapping MBIM IP session
-0 to this VLAN, and will drop untagged frames on the master wwanY
-device.
-
-Tip: It might be less confusing to the end user to name this VLAN
-subdevice after the MBIM SessionID instead of the VLAN ID.  For
-example:
-
-  ip link add link wwan0 name wwan0.0 type vlan id 4094
-
-
-VLAN mapping
-------------
-
-Summarizing the cdc_mbim driver mapping described above, we have this
-relationship between VLAN tags on the wwanY network device and MBIM
-sessions on the shared USB data channel:
-
-  VLAN ID       MBIM type   MBIM SessionID           Notes
-  ---------------------------------------------------------
-  untagged      IPS         0                        a)
-  1 - 255       IPS         1 - 255 <VLANID>
-  256 - 511     DSS         0 - 255 <VLANID - 256>
-  512 - 4093                                         b)
-  4094          IPS         0                        c)
-
-    a) if no VLAN ID 4094 link exists, else dropped
-    b) unsupported VLAN range, unconditionally dropped
-    c) if a VLAN ID 4094 link exists, else dropped
-
-
-
-
-References
-==========
-
-[1] USB Implementers Forum, Inc. - "Universal Serial Bus
-      Communications Class Subclass Specification for Mobile Broadband
-      Interface Model", Revision 1.0 (Errata 1), May 1, 2013
-      - http://www.usb.org/developers/docs/devclass_docs/
-
-[2] USB Implementers Forum, Inc. - "Universal Serial Bus
-      Communications Class Subclass Specifications for Network Control
-      Model Devices", Revision 1.0 (Errata 1), November 24, 2010
-      - http://www.usb.org/developers/docs/devclass_docs/
-
-[3] libmbim - "a glib-based library for talking to WWAN modems and
-      devices which speak the Mobile Interface Broadband Model (MBIM)
-      protocol"
-      - http://www.freedesktop.org/wiki/Software/libmbim/
-
-[4] ModemManager - "a DBus-activated daemon which controls mobile
-      broadband (2G/3G/4G) devices and connections"
-      - http://www.freedesktop.org/wiki/Software/ModemManager/
-
-[5] "MBIM (Mobile Broadband Interface Model) Registry"
-       - http://compliance.usb.org/mbim/
-
-[6] "/sys/kernel/debug/usb/devices output format"
-       - Documentation/driver-api/usb/usb.rst
-
-[7] "/sys/bus/usb/devices/.../descriptors"
-       - Documentation/ABI/stable/sysfs-bus-usb
diff --git a/Documentation/networking/cops.rst b/Documentation/networking/cops.rst
new file mode 100644
index 000000000000..964ba80599a9
--- /dev/null
+++ b/Documentation/networking/cops.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================================
+The COPS LocalTalk Linux driver (cops.c)
+========================================
+
+By Jay Schulist <jschlst@samba.org>
+
+This driver has two modes and they are: Dayna mode and Tangent mode.
+Each mode corresponds with the type of card. It has been found
+that there are 2 main types of cards and all other cards are
+the same and just have different names or only have minor differences
+such as more IO ports. As this driver is tested it will
+become more clear exactly what cards are supported.
+
+Right now these cards are known to work with the COPS driver. The
+LT-200 cards work in a somewhat more limited capacity than the
+DL200 cards, which work very well and are in use by many people.
+
+TANGENT driver mode:
+	- Tangent ATB-II, Novell NL-1000, Daystar Digital LT-200
+
+DAYNA driver mode:
+	- Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95,
+	- Farallon PhoneNET PC III, Farallon PhoneNET PC II
+
+Other cards possibly supported mode unknown though:
+	- Dayna DL2000 (Full length)
+
+The COPS driver defaults to using Dayna mode. To change the driver's
+mode if you built a driver with dual support use board_type=1 or
+board_type=2 for Dayna or Tangent with insmod.
+
+Operation/loading of the driver
+===============================
+
+Use modprobe like this:	/sbin/modprobe cops.o (IO #) (IRQ #)
+If you do not specify any options the driver will try and use the IO = 0x240,
+IRQ = 5. As of right now I would only use IRQ 5 for the card, if autoprobing.
+
+To load multiple COPS driver Localtalk cards you can do one of the following::
+
+	insmod cops io=0x240 irq=5
+	insmod -o cops2 cops io=0x260 irq=3
+
+Or in lilo.conf put something like this::
+
+	append="ether=5,0x240,lt0 ether=3,0x260,lt1"
+
+Then bring up the interface with ifconfig. It will look something like this::
+
+  lt0       Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-F7-00-00-00-00-00-00-00-00
+	    inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
+	    UP BROADCAST RUNNING NOARP MULTICAST  MTU:600  Metric:1
+	    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+	    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 coll:0
+
+Netatalk Configuration
+======================
+
+You will need to configure atalkd with something like the following to make
+it work with the cops.c driver.
+
+* For single LTalk card use::
+
+    dummy -seed -phase 2 -net 2000 -addr 2000.10 -zone "1033"
+    lt0 -seed -phase 1 -net 1000 -addr 1000.50 -zone "1033"
+
+* For multiple cards, Ethernet and LocalTalk::
+
+    eth0 -seed -phase 2 -net 3000 -addr 3000.20 -zone "1033"
+    lt0 -seed -phase 1 -net 1000 -addr 1000.50 -zone "1033"
+
+* For multiple LocalTalk cards, and an Ethernet card.
+
+* Order seems to matter here, Ethernet last::
+
+    lt0 -seed -phase 1 -net 1000 -addr 1000.10 -zone "LocalTalk1"
+    lt1 -seed -phase 1 -net 2000 -addr 2000.20 -zone "LocalTalk2"
+    eth0 -seed -phase 2 -net 3000 -addr 3000.30 -zone "EtherTalk"
diff --git a/Documentation/networking/cops.txt b/Documentation/networking/cops.txt
deleted file mode 100644
index 3e344b448e07..000000000000
--- a/Documentation/networking/cops.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Text File for the COPS LocalTalk Linux driver (cops.c).
-	By Jay Schulist <jschlst@samba.org>
-
-This driver has two modes and they are: Dayna mode and Tangent mode.
-Each mode corresponds with the type of card. It has been found
-that there are 2 main types of cards and all other cards are
-the same and just have different names or only have minor differences
-such as more IO ports. As this driver is tested it will
-become more clear exactly what cards are supported. 
-
-Right now these cards are known to work with the COPS driver. The
-LT-200 cards work in a somewhat more limited capacity than the
-DL200 cards, which work very well and are in use by many people.
-
-TANGENT driver mode:
-	Tangent ATB-II, Novell NL-1000, Daystar Digital LT-200
-DAYNA driver mode:
-	Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95,
-	Farallon PhoneNET PC III, Farallon PhoneNET PC II
-Other cards possibly supported mode unknown though:
-	Dayna DL2000 (Full length)
-
-The COPS driver defaults to using Dayna mode. To change the driver's 
-mode if you built a driver with dual support use board_type=1 or
-board_type=2 for Dayna or Tangent with insmod.
-
-** Operation/loading of the driver.
-Use modprobe like this:	/sbin/modprobe cops.o (IO #) (IRQ #)
-If you do not specify any options the driver will try and use the IO = 0x240,
-IRQ = 5. As of right now I would only use IRQ 5 for the card, if autoprobing.
-
-To load multiple COPS driver Localtalk cards you can do one of the following.
-
-insmod cops io=0x240 irq=5
-insmod -o cops2 cops io=0x260 irq=3
-
-Or in lilo.conf put something like this:
-	append="ether=5,0x240,lt0 ether=3,0x260,lt1"
-
-Then bring up the interface with ifconfig. It will look something like this:
-lt0       Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-F7-00-00-00-00-00-00-00-00
-          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
-          UP BROADCAST RUNNING NOARP MULTICAST  MTU:600  Metric:1
-          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
-          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 coll:0
-
-** Netatalk Configuration
-You will need to configure atalkd with something like the following to make
-it work with the cops.c driver.
-
-* For single LTalk card use.
-dummy -seed -phase 2 -net 2000 -addr 2000.10 -zone "1033"
-lt0 -seed -phase 1 -net 1000 -addr 1000.50 -zone "1033"
-
-* For multiple cards, Ethernet and LocalTalk.
-eth0 -seed -phase 2 -net 3000 -addr 3000.20 -zone "1033"
-lt0 -seed -phase 1 -net 1000 -addr 1000.50 -zone "1033"
-
-* For multiple LocalTalk cards, and an Ethernet card.
-* Order seems to matter here, Ethernet last.
-lt0 -seed -phase 1 -net 1000 -addr 1000.10 -zone "LocalTalk1"
-lt1 -seed -phase 1 -net 2000 -addr 2000.20 -zone "LocalTalk2"
-eth0 -seed -phase 2 -net 3000 -addr 3000.30 -zone "EtherTalk"
diff --git a/Documentation/networking/cxacru.rst b/Documentation/networking/cxacru.rst
new file mode 100644
index 000000000000..6088af2ffeda
--- /dev/null
+++ b/Documentation/networking/cxacru.rst
@@ -0,0 +1,120 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+ATM cxacru device driver
+========================
+
+Firmware is required for this device: http://accessrunner.sourceforge.net/
+
+While it is capable of managing/maintaining the ADSL connection without the
+module loaded, the device will sometimes stop responding after unloading the
+driver and it is necessary to unplug/remove power to the device to fix this.
+
+Note: support for cxacru-cf.bin has been removed. It was not loaded correctly
+so it had no effect on the device configuration. Fixing it could have stopped
+existing devices working when an invalid configuration is supplied.
+
+There is a script cxacru-cf.py to convert an existing file to the sysfs form.
+
+Detected devices will appear as ATM devices named "cxacru". In /sys/class/atm/
+these are directories named cxacruN where N is the device number. A symlink
+named device points to the USB interface device's directory which contains
+several sysfs attribute files for retrieving device statistics:
+
+* adsl_controller_version
+
+* adsl_headend
+* adsl_headend_environment
+
+	- Information about the remote headend.
+
+* adsl_config
+
+	- Configuration writing interface.
+	- Write parameters in hexadecimal format <index>=<value>,
+	  separated by whitespace, e.g.:
+
+		"1=0 a=5"
+
+	- Up to 7 parameters at a time will be sent and the modem will restart
+	  the ADSL connection when any value is set. These are logged for future
+	  reference.
+
+* downstream_attenuation (dB)
+* downstream_bits_per_frame
+* downstream_rate (kbps)
+* downstream_snr_margin (dB)
+
+	- Downstream stats.
+
+* upstream_attenuation (dB)
+* upstream_bits_per_frame
+* upstream_rate (kbps)
+* upstream_snr_margin (dB)
+* transmitter_power (dBm/Hz)
+
+	- Upstream stats.
+
+* downstream_crc_errors
+* downstream_fec_errors
+* downstream_hec_errors
+* upstream_crc_errors
+* upstream_fec_errors
+* upstream_hec_errors
+
+	- Error counts.
+
+* line_startable
+
+	- Indicates that ADSL support on the device
+	  is/can be enabled, see adsl_start.
+
+* line_status
+
+	 - "initialising"
+	 - "down"
+	 - "attempting to activate"
+	 - "training"
+	 - "channel analysis"
+	 - "exchange"
+	 - "waiting"
+	 - "up"
+
+	Changes between "down" and "attempting to activate"
+	if there is no signal.
+
+* link_status
+
+	 - "not connected"
+	 - "connected"
+	 - "lost"
+
+* mac_address
+
+* modulation
+
+	 - "" (when not connected)
+	 - "ANSI T1.413"
+	 - "ITU-T G.992.1 (G.DMT)"
+	 - "ITU-T G.992.2 (G.LITE)"
+
+* startup_attempts
+
+	- Count of total attempts to initialise ADSL.
+
+To enable/disable ADSL, the following can be written to the adsl_state file:
+
+	 - "start"
+	 - "stop
+	 - "restart" (stops, waits 1.5s, then starts)
+	 - "poll" (used to resume status polling if it was disabled due to failure)
+
+Changes in adsl/line state are reported via kernel log messages::
+
+	[4942145.150704] ATM dev 0: ADSL state: running
+	[4942243.663766] ATM dev 0: ADSL line: down
+	[4942249.665075] ATM dev 0: ADSL line: attempting to activate
+	[4942253.654954] ATM dev 0: ADSL line: training
+	[4942255.666387] ATM dev 0: ADSL line: channel analysis
+	[4942259.656262] ATM dev 0: ADSL line: exchange
+	[2635357.696901] ATM dev 0: ADSL line: up (8128 kb/s down | 832 kb/s up)
diff --git a/Documentation/networking/cxacru.txt b/Documentation/networking/cxacru.txt
deleted file mode 100644
index 2cce04457b4d..000000000000
--- a/Documentation/networking/cxacru.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-Firmware is required for this device: http://accessrunner.sourceforge.net/
-
-While it is capable of managing/maintaining the ADSL connection without the
-module loaded, the device will sometimes stop responding after unloading the
-driver and it is necessary to unplug/remove power to the device to fix this.
-
-Note: support for cxacru-cf.bin has been removed. It was not loaded correctly
-so it had no effect on the device configuration. Fixing it could have stopped
-existing devices working when an invalid configuration is supplied.
-
-There is a script cxacru-cf.py to convert an existing file to the sysfs form.
-
-Detected devices will appear as ATM devices named "cxacru". In /sys/class/atm/
-these are directories named cxacruN where N is the device number. A symlink
-named device points to the USB interface device's directory which contains
-several sysfs attribute files for retrieving device statistics:
-
-* adsl_controller_version
-
-* adsl_headend
-* adsl_headend_environment
-	Information about the remote headend.
-
-* adsl_config
-	Configuration writing interface.
-	Write parameters in hexadecimal format <index>=<value>,
-	separated by whitespace, e.g.:
-		"1=0 a=5"
-	Up to 7 parameters at a time will be sent and the modem will restart
-	the ADSL connection when any value is set. These are logged for future
-	reference.
-
-* downstream_attenuation (dB)
-* downstream_bits_per_frame
-* downstream_rate (kbps)
-* downstream_snr_margin (dB)
-	Downstream stats.
-
-* upstream_attenuation (dB)
-* upstream_bits_per_frame
-* upstream_rate (kbps)
-* upstream_snr_margin (dB)
-* transmitter_power (dBm/Hz)
-	Upstream stats.
-
-* downstream_crc_errors
-* downstream_fec_errors
-* downstream_hec_errors
-* upstream_crc_errors
-* upstream_fec_errors
-* upstream_hec_errors
-	Error counts.
-
-* line_startable
-	Indicates that ADSL support on the device
-	is/can be enabled, see adsl_start.
-
-* line_status
-	"initialising"
-	"down"
-	"attempting to activate"
-	"training"
-	"channel analysis"
-	"exchange"
-	"waiting"
-	"up"
-
-	Changes between "down" and "attempting to activate"
-	if there is no signal.
-
-* link_status
-	"not connected"
-	"connected"
-	"lost"
-
-* mac_address
-
-* modulation
-	"" (when not connected)
-	"ANSI T1.413"
-	"ITU-T G.992.1 (G.DMT)"
-	"ITU-T G.992.2 (G.LITE)"
-
-* startup_attempts
-	Count of total attempts to initialise ADSL.
-
-To enable/disable ADSL, the following can be written to the adsl_state file:
-	"start"
-	"stop
-	"restart" (stops, waits 1.5s, then starts)
-	"poll" (used to resume status polling if it was disabled due to failure)
-
-Changes in adsl/line state are reported via kernel log messages:
-	[4942145.150704] ATM dev 0: ADSL state: running
-	[4942243.663766] ATM dev 0: ADSL line: down
-	[4942249.665075] ATM dev 0: ADSL line: attempting to activate
-	[4942253.654954] ATM dev 0: ADSL line: training
-	[4942255.666387] ATM dev 0: ADSL line: channel analysis
-	[4942259.656262] ATM dev 0: ADSL line: exchange
-	[2635357.696901] ATM dev 0: ADSL line: up (8128 kb/s down | 832 kb/s up)
diff --git a/Documentation/networking/dccp.rst b/Documentation/networking/dccp.rst
new file mode 100644
index 000000000000..dde16be04456
--- /dev/null
+++ b/Documentation/networking/dccp.rst
@@ -0,0 +1,216 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+DCCP protocol
+=============
+
+
+.. Contents
+   - Introduction
+   - Missing features
+   - Socket options
+   - Sysctl variables
+   - IOCTLs
+   - Other tunables
+   - Notes
+
+
+Introduction
+============
+Datagram Congestion Control Protocol (DCCP) is an unreliable, connection
+oriented protocol designed to solve issues present in UDP and TCP, particularly
+for real-time and multimedia (streaming) traffic.
+It divides into a base protocol (RFC 4340) and pluggable congestion control
+modules called CCIDs. Like pluggable TCP congestion control, at least one CCID
+needs to be enabled in order for the protocol to function properly. In the Linux
+implementation, this is the TCP-like CCID2 (RFC 4341). Additional CCIDs, such as
+the TCP-friendly CCID3 (RFC 4342), are optional.
+For a brief introduction to CCIDs and suggestions for choosing a CCID to match
+given applications, see section 10 of RFC 4340.
+
+It has a base protocol and pluggable congestion control IDs (CCIDs).
+
+DCCP is a Proposed Standard (RFC 2026), and the homepage for DCCP as a protocol
+is at http://www.ietf.org/html.charters/dccp-charter.html
+
+
+Missing features
+================
+The Linux DCCP implementation does not currently support all the features that are
+specified in RFCs 4340...42.
+
+The known bugs are at:
+
+	http://www.linuxfoundation.org/collaborate/workgroups/networking/todo#DCCP
+
+For more up-to-date versions of the DCCP implementation, please consider using
+the experimental DCCP test tree; instructions for checking this out are on:
+http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp_testing#Experimental_DCCP_source_tree
+
+
+Socket options
+==============
+DCCP_SOCKOPT_QPOLICY_ID sets the dequeuing policy for outgoing packets. It takes
+a policy ID as argument and can only be set before the connection (i.e. changes
+during an established connection are not supported). Currently, two policies are
+defined: the "simple" policy (DCCPQ_POLICY_SIMPLE), which does nothing special,
+and a priority-based variant (DCCPQ_POLICY_PRIO). The latter allows to pass an
+u32 priority value as ancillary data to sendmsg(), where higher numbers indicate
+a higher packet priority (similar to SO_PRIORITY). This ancillary data needs to
+be formatted using a cmsg(3) message header filled in as follows::
+
+	cmsg->cmsg_level = SOL_DCCP;
+	cmsg->cmsg_type	 = DCCP_SCM_PRIORITY;
+	cmsg->cmsg_len	 = CMSG_LEN(sizeof(uint32_t));	/* or CMSG_LEN(4) */
+
+DCCP_SOCKOPT_QPOLICY_TXQLEN sets the maximum length of the output queue. A zero
+value is always interpreted as unbounded queue length. If different from zero,
+the interpretation of this parameter depends on the current dequeuing policy
+(see above): the "simple" policy will enforce a fixed queue size by returning
+EAGAIN, whereas the "prio" policy enforces a fixed queue length by dropping the
+lowest-priority packet first. The default value for this parameter is
+initialised from /proc/sys/net/dccp/default/tx_qlen.
+
+DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
+service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
+the socket will fall back to 0 (which means that no meaningful service code
+is present). On active sockets this is set before connect(); specifying more
+than one code has no effect (all subsequent service codes are ignored). The
+case is different for passive sockets, where multiple service codes (up to 32)
+can be set before calling bind().
+
+DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
+size (application payload size) in bytes, see RFC 4340, section 14.
+
+DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs
+supported by the endpoint. The option value is an array of type uint8_t whose
+size is passed as option length. The minimum array size is 4 elements, the
+value returned in the optlen argument always reflects the true number of
+built-in CCIDs.
+
+DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same
+time, combining the operation of the next two socket options. This option is
+preferable over the latter two, since often applications will use the same
+type of CCID for both directions; and mixed use of CCIDs is not currently well
+understood. This socket option takes as argument at least one uint8_t value, or
+an array of uint8_t values, which must match available CCIDS (see above). CCIDs
+must be registered on the socket before calling connect() or listen().
+
+DCCP_SOCKOPT_TX_CCID is read/write. It returns the current CCID (if set) or sets
+the preference list for the TX CCID, using the same format as DCCP_SOCKOPT_CCID.
+Please note that the getsockopt argument type here is ``int``, not uint8_t.
+
+DCCP_SOCKOPT_RX_CCID is analogous to DCCP_SOCKOPT_TX_CCID, but for the RX CCID.
+
+DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold
+timewait state when closing the connection (RFC 4340, 8.3). The usual case is
+that the closing server sends a CloseReq, whereupon the client holds timewait
+state. When this boolean socket option is on, the server sends a Close instead
+and will enter TIMEWAIT. This option must be set after accept() returns.
+
+DCCP_SOCKOPT_SEND_CSCOV and DCCP_SOCKOPT_RECV_CSCOV are used for setting the
+partial checksum coverage (RFC 4340, sec. 9.2). The default is that checksums
+always cover the entire packet and that only fully covered application data is
+accepted by the receiver. Hence, when using this feature on the sender, it must
+be enabled at the receiver, too with suitable choice of CsCov.
+
+DCCP_SOCKOPT_SEND_CSCOV sets the sender checksum coverage. Values in the
+	range 0..15 are acceptable. The default setting is 0 (full coverage),
+	values between 1..15 indicate partial coverage.
+
+DCCP_SOCKOPT_RECV_CSCOV is for the receiver and has a different meaning: it
+	sets a threshold, where again values 0..15 are acceptable. The default
+	of 0 means that all packets with a partial coverage will be discarded.
+	Values in the range 1..15 indicate that packets with minimally such a
+	coverage value are also acceptable. The higher the number, the more
+	restrictive this setting (see [RFC 4340, sec. 9.2.1]). Partial coverage
+	settings are inherited to the child socket after accept().
+
+The following two options apply to CCID 3 exclusively and are getsockopt()-only.
+In either case, a TFRC info struct (defined in <linux/tfrc.h>) is returned.
+
+DCCP_SOCKOPT_CCID_RX_INFO
+	Returns a ``struct tfrc_rx_info`` in optval; the buffer for optval and
+	optlen must be set to at least sizeof(struct tfrc_rx_info).
+
+DCCP_SOCKOPT_CCID_TX_INFO
+	Returns a ``struct tfrc_tx_info`` in optval; the buffer for optval and
+	optlen must be set to at least sizeof(struct tfrc_tx_info).
+
+On unidirectional connections it is useful to close the unused half-connection
+via shutdown (SHUT_WR or SHUT_RD): this will reduce per-packet processing costs.
+
+
+Sysctl variables
+================
+Several DCCP default parameters can be managed by the following sysctls
+(sysctl net.dccp.default or /proc/sys/net/dccp/default):
+
+request_retries
+	The number of active connection initiation retries (the number of
+	Requests minus one) before timing out. In addition, it also governs
+	the behaviour of the other, passive side: this variable also sets
+	the number of times DCCP repeats sending a Response when the initial
+	handshake does not progress from RESPOND to OPEN (i.e. when no Ack
+	is received after the initial Request).  This value should be greater
+	than 0, suggested is less than 10. Analogue of tcp_syn_retries.
+
+retries1
+	How often a DCCP Response is retransmitted until the listening DCCP
+	side considers its connecting peer dead. Analogue of tcp_retries1.
+
+retries2
+	The number of times a general DCCP packet is retransmitted. This has
+	importance for retransmitted acknowledgments and feature negotiation,
+	data packets are never retransmitted. Analogue of tcp_retries2.
+
+tx_ccid = 2
+	Default CCID for the sender-receiver half-connection. Depending on the
+	choice of CCID, the Send Ack Vector feature is enabled automatically.
+
+rx_ccid = 2
+	Default CCID for the receiver-sender half-connection; see tx_ccid.
+
+seq_window = 100
+	The initial sequence window (sec. 7.5.2) of the sender. This influences
+	the local ackno validity and the remote seqno validity windows (7.5.1).
+	Values in the range Wmin = 32 (RFC 4340, 7.5.2) up to 2^32-1 can be set.
+
+tx_qlen = 5
+	The size of the transmit buffer in packets. A value of 0 corresponds
+	to an unbounded transmit buffer.
+
+sync_ratelimit = 125 ms
+	The timeout between subsequent DCCP-Sync packets sent in response to
+	sequence-invalid packets on the same socket (RFC 4340, 7.5.4). The unit
+	of this parameter is milliseconds; a value of 0 disables rate-limiting.
+
+
+IOCTLS
+======
+FIONREAD
+	Works as in udp(7): returns in the ``int`` argument pointer the size of
+	the next pending datagram in bytes, or 0 when no datagram is pending.
+
+
+Other tunables
+==============
+Per-route rto_min support
+	CCID-2 supports the RTAX_RTO_MIN per-route setting for the minimum value
+	of the RTO timer. This setting can be modified via the 'rto_min' option
+	of iproute2; for example::
+
+		> ip route change 10.0.0.0/24   rto_min 250j dev wlan0
+		> ip route add    10.0.0.254/32 rto_min 800j dev wlan0
+		> ip route show dev wlan0
+
+	CCID-3 also supports the rto_min setting: it is used to define the lower
+	bound for the expiry of the nofeedback timer. This can be useful on LANs
+	with very low RTTs (e.g., loopback, Gbit ethernet).
+
+
+Notes
+=====
+DCCP does not travel through NAT successfully at present on many boxes. This is
+because the checksum covers the pseudo-header as per TCP and UDP. Linux NAT
+support for DCCP has been added.
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
deleted file mode 100644
index 55c575fcaf17..000000000000
--- a/Documentation/networking/dccp.txt
+++ /dev/null
@@ -1,207 +0,0 @@
-DCCP protocol
-=============
-
-
-Contents
-========
-- Introduction
-- Missing features
-- Socket options
-- Sysctl variables
-- IOCTLs
-- Other tunables
-- Notes
-
-
-Introduction
-============
-Datagram Congestion Control Protocol (DCCP) is an unreliable, connection
-oriented protocol designed to solve issues present in UDP and TCP, particularly
-for real-time and multimedia (streaming) traffic.
-It divides into a base protocol (RFC 4340) and pluggable congestion control
-modules called CCIDs. Like pluggable TCP congestion control, at least one CCID
-needs to be enabled in order for the protocol to function properly. In the Linux
-implementation, this is the TCP-like CCID2 (RFC 4341). Additional CCIDs, such as
-the TCP-friendly CCID3 (RFC 4342), are optional.
-For a brief introduction to CCIDs and suggestions for choosing a CCID to match
-given applications, see section 10 of RFC 4340.
-
-It has a base protocol and pluggable congestion control IDs (CCIDs).
-
-DCCP is a Proposed Standard (RFC 2026), and the homepage for DCCP as a protocol
-is at http://www.ietf.org/html.charters/dccp-charter.html
-
-
-Missing features
-================
-The Linux DCCP implementation does not currently support all the features that are
-specified in RFCs 4340...42.
-
-The known bugs are at:
-	http://www.linuxfoundation.org/collaborate/workgroups/networking/todo#DCCP
-
-For more up-to-date versions of the DCCP implementation, please consider using
-the experimental DCCP test tree; instructions for checking this out are on:
-http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp_testing#Experimental_DCCP_source_tree
-
-
-Socket options
-==============
-DCCP_SOCKOPT_QPOLICY_ID sets the dequeuing policy for outgoing packets. It takes
-a policy ID as argument and can only be set before the connection (i.e. changes
-during an established connection are not supported). Currently, two policies are
-defined: the "simple" policy (DCCPQ_POLICY_SIMPLE), which does nothing special,
-and a priority-based variant (DCCPQ_POLICY_PRIO). The latter allows to pass an
-u32 priority value as ancillary data to sendmsg(), where higher numbers indicate
-a higher packet priority (similar to SO_PRIORITY). This ancillary data needs to
-be formatted using a cmsg(3) message header filled in as follows:
-	cmsg->cmsg_level = SOL_DCCP;
-	cmsg->cmsg_type	 = DCCP_SCM_PRIORITY;
-	cmsg->cmsg_len	 = CMSG_LEN(sizeof(uint32_t));	/* or CMSG_LEN(4) */
-
-DCCP_SOCKOPT_QPOLICY_TXQLEN sets the maximum length of the output queue. A zero
-value is always interpreted as unbounded queue length. If different from zero,
-the interpretation of this parameter depends on the current dequeuing policy
-(see above): the "simple" policy will enforce a fixed queue size by returning
-EAGAIN, whereas the "prio" policy enforces a fixed queue length by dropping the
-lowest-priority packet first. The default value for this parameter is
-initialised from /proc/sys/net/dccp/default/tx_qlen.
-
-DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
-service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
-the socket will fall back to 0 (which means that no meaningful service code
-is present). On active sockets this is set before connect(); specifying more
-than one code has no effect (all subsequent service codes are ignored). The
-case is different for passive sockets, where multiple service codes (up to 32)
-can be set before calling bind().
-
-DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
-size (application payload size) in bytes, see RFC 4340, section 14.
-
-DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs
-supported by the endpoint. The option value is an array of type uint8_t whose
-size is passed as option length. The minimum array size is 4 elements, the
-value returned in the optlen argument always reflects the true number of
-built-in CCIDs.
-
-DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same
-time, combining the operation of the next two socket options. This option is
-preferable over the latter two, since often applications will use the same
-type of CCID for both directions; and mixed use of CCIDs is not currently well
-understood. This socket option takes as argument at least one uint8_t value, or
-an array of uint8_t values, which must match available CCIDS (see above). CCIDs
-must be registered on the socket before calling connect() or listen().
-
-DCCP_SOCKOPT_TX_CCID is read/write. It returns the current CCID (if set) or sets
-the preference list for the TX CCID, using the same format as DCCP_SOCKOPT_CCID.
-Please note that the getsockopt argument type here is `int', not uint8_t.
-
-DCCP_SOCKOPT_RX_CCID is analogous to DCCP_SOCKOPT_TX_CCID, but for the RX CCID.
-
-DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold
-timewait state when closing the connection (RFC 4340, 8.3). The usual case is
-that the closing server sends a CloseReq, whereupon the client holds timewait
-state. When this boolean socket option is on, the server sends a Close instead
-and will enter TIMEWAIT. This option must be set after accept() returns.
-
-DCCP_SOCKOPT_SEND_CSCOV and DCCP_SOCKOPT_RECV_CSCOV are used for setting the
-partial checksum coverage (RFC 4340, sec. 9.2). The default is that checksums
-always cover the entire packet and that only fully covered application data is
-accepted by the receiver. Hence, when using this feature on the sender, it must
-be enabled at the receiver, too with suitable choice of CsCov.
-
-DCCP_SOCKOPT_SEND_CSCOV sets the sender checksum coverage. Values in the
-	range 0..15 are acceptable. The default setting is 0 (full coverage),
-	values between 1..15 indicate partial coverage.
-DCCP_SOCKOPT_RECV_CSCOV is for the receiver and has a different meaning: it
-	sets a threshold, where again values 0..15 are acceptable. The default
-	of 0 means that all packets with a partial coverage will be discarded.
-	Values in the range 1..15 indicate that packets with minimally such a
-	coverage value are also acceptable. The higher the number, the more
-	restrictive this setting (see [RFC 4340, sec. 9.2.1]). Partial coverage
-	settings are inherited to the child socket after accept().
-
-The following two options apply to CCID 3 exclusively and are getsockopt()-only.
-In either case, a TFRC info struct (defined in <linux/tfrc.h>) is returned.
-DCCP_SOCKOPT_CCID_RX_INFO
-	Returns a `struct tfrc_rx_info' in optval; the buffer for optval and
-	optlen must be set to at least sizeof(struct tfrc_rx_info).
-DCCP_SOCKOPT_CCID_TX_INFO
-	Returns a `struct tfrc_tx_info' in optval; the buffer for optval and
-	optlen must be set to at least sizeof(struct tfrc_tx_info).
-
-On unidirectional connections it is useful to close the unused half-connection
-via shutdown (SHUT_WR or SHUT_RD): this will reduce per-packet processing costs.
-
-
-Sysctl variables
-================
-Several DCCP default parameters can be managed by the following sysctls
-(sysctl net.dccp.default or /proc/sys/net/dccp/default):
-
-request_retries
-	The number of active connection initiation retries (the number of
-	Requests minus one) before timing out. In addition, it also governs
-	the behaviour of the other, passive side: this variable also sets
-	the number of times DCCP repeats sending a Response when the initial
-	handshake does not progress from RESPOND to OPEN (i.e. when no Ack
-	is received after the initial Request).  This value should be greater
-	than 0, suggested is less than 10. Analogue of tcp_syn_retries.
-
-retries1
-	How often a DCCP Response is retransmitted until the listening DCCP
-	side considers its connecting peer dead. Analogue of tcp_retries1.
-
-retries2
-	The number of times a general DCCP packet is retransmitted. This has
-	importance for retransmitted acknowledgments and feature negotiation,
-	data packets are never retransmitted. Analogue of tcp_retries2.
-
-tx_ccid = 2
-	Default CCID for the sender-receiver half-connection. Depending on the
-	choice of CCID, the Send Ack Vector feature is enabled automatically.
-
-rx_ccid = 2
-	Default CCID for the receiver-sender half-connection; see tx_ccid.
-
-seq_window = 100
-	The initial sequence window (sec. 7.5.2) of the sender. This influences
-	the local ackno validity and the remote seqno validity windows (7.5.1).
-	Values in the range Wmin = 32 (RFC 4340, 7.5.2) up to 2^32-1 can be set.
-
-tx_qlen = 5
-	The size of the transmit buffer in packets. A value of 0 corresponds
-	to an unbounded transmit buffer.
-
-sync_ratelimit = 125 ms
-	The timeout between subsequent DCCP-Sync packets sent in response to
-	sequence-invalid packets on the same socket (RFC 4340, 7.5.4). The unit
-	of this parameter is milliseconds; a value of 0 disables rate-limiting.
-
-
-IOCTLS
-======
-FIONREAD
-	Works as in udp(7): returns in the `int' argument pointer the size of
-	the next pending datagram in bytes, or 0 when no datagram is pending.
-
-
-Other tunables
-==============
-Per-route rto_min support
-	CCID-2 supports the RTAX_RTO_MIN per-route setting for the minimum value
-	of the RTO timer. This setting can be modified via the 'rto_min' option
-	of iproute2; for example:
-		> ip route change 10.0.0.0/24   rto_min 250j dev wlan0
-		> ip route add    10.0.0.254/32 rto_min 800j dev wlan0
-		> ip route show dev wlan0
-	CCID-3 also supports the rto_min setting: it is used to define the lower
-	bound for the expiry of the nofeedback timer. This can be useful on LANs
-	with very low RTTs (e.g., loopback, Gbit ethernet).
-
-
-Notes
-=====
-DCCP does not travel through NAT successfully at present on many boxes. This is
-because the checksum covers the pseudo-header as per TCP and UDP. Linux NAT
-support for DCCP has been added.
diff --git a/Documentation/networking/dctcp.rst b/Documentation/networking/dctcp.rst
new file mode 100644
index 000000000000..4cc8bb2dad50
--- /dev/null
+++ b/Documentation/networking/dctcp.rst
@@ -0,0 +1,52 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================
+DCTCP (DataCenter TCP)
+======================
+
+DCTCP is an enhancement to the TCP congestion control algorithm for data
+center networks and leverages Explicit Congestion Notification (ECN) in
+the data center network to provide multi-bit feedback to the end hosts.
+
+To enable it on end hosts::
+
+  sysctl -w net.ipv4.tcp_congestion_control=dctcp
+  sysctl -w net.ipv4.tcp_ecn_fallback=0 (optional)
+
+All switches in the data center network running DCTCP must support ECN
+marking and be configured for marking when reaching defined switch buffer
+thresholds. The default ECN marking threshold heuristic for DCTCP on
+switches is 20 packets (30KB) at 1Gbps, and 65 packets (~100KB) at 10Gbps,
+but might need further careful tweaking.
+
+For more details, see below documents:
+
+Paper:
+
+The algorithm is further described in detail in the following two
+SIGCOMM/SIGMETRICS papers:
+
+ i) Mohammad Alizadeh, Albert Greenberg, David A. Maltz, Jitendra Padhye,
+    Parveen Patel, Balaji Prabhakar, Sudipta Sengupta, and Murari Sridharan:
+
+      "Data Center TCP (DCTCP)", Data Center Networks session"
+
+      Proc. ACM SIGCOMM, New Delhi, 2010.
+
+    http://simula.stanford.edu/~alizade/Site/DCTCP_files/dctcp-final.pdf
+    http://www.sigcomm.org/ccr/papers/2010/October/1851275.1851192
+
+ii) Mohammad Alizadeh, Adel Javanmard, and Balaji Prabhakar:
+
+      "Analysis of DCTCP: Stability, Convergence, and Fairness"
+      Proc. ACM SIGMETRICS, San Jose, 2011.
+
+    http://simula.stanford.edu/~alizade/Site/DCTCP_files/dctcp_analysis-full.pdf
+
+IETF informational draft:
+
+  http://tools.ietf.org/html/draft-bensley-tcpm-dctcp-00
+
+DCTCP site:
+
+  http://simula.stanford.edu/~alizade/Site/DCTCP.html
diff --git a/Documentation/networking/dctcp.txt b/Documentation/networking/dctcp.txt
deleted file mode 100644
index 13a857753208..000000000000
--- a/Documentation/networking/dctcp.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-DCTCP (DataCenter TCP)
-----------------------
-
-DCTCP is an enhancement to the TCP congestion control algorithm for data
-center networks and leverages Explicit Congestion Notification (ECN) in
-the data center network to provide multi-bit feedback to the end hosts.
-
-To enable it on end hosts:
-
-  sysctl -w net.ipv4.tcp_congestion_control=dctcp
-  sysctl -w net.ipv4.tcp_ecn_fallback=0 (optional)
-
-All switches in the data center network running DCTCP must support ECN
-marking and be configured for marking when reaching defined switch buffer
-thresholds. The default ECN marking threshold heuristic for DCTCP on
-switches is 20 packets (30KB) at 1Gbps, and 65 packets (~100KB) at 10Gbps,
-but might need further careful tweaking.
-
-For more details, see below documents:
-
-Paper:
-
-The algorithm is further described in detail in the following two
-SIGCOMM/SIGMETRICS papers:
-
- i) Mohammad Alizadeh, Albert Greenberg, David A. Maltz, Jitendra Padhye,
-    Parveen Patel, Balaji Prabhakar, Sudipta Sengupta, and Murari Sridharan:
-      "Data Center TCP (DCTCP)", Data Center Networks session
-      Proc. ACM SIGCOMM, New Delhi, 2010.
-    http://simula.stanford.edu/~alizade/Site/DCTCP_files/dctcp-final.pdf
-    http://www.sigcomm.org/ccr/papers/2010/October/1851275.1851192
-
-ii) Mohammad Alizadeh, Adel Javanmard, and Balaji Prabhakar:
-      "Analysis of DCTCP: Stability, Convergence, and Fairness"
-      Proc. ACM SIGMETRICS, San Jose, 2011.
-    http://simula.stanford.edu/~alizade/Site/DCTCP_files/dctcp_analysis-full.pdf
-
-IETF informational draft:
-
-  http://tools.ietf.org/html/draft-bensley-tcpm-dctcp-00
-
-DCTCP site:
-
-  http://simula.stanford.edu/~alizade/Site/DCTCP.html
diff --git a/Documentation/networking/decnet.rst b/Documentation/networking/decnet.rst
new file mode 100644
index 000000000000..b8bc11ff8370
--- /dev/null
+++ b/Documentation/networking/decnet.rst
@@ -0,0 +1,243 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Linux DECnet Networking Layer Information
+=========================================
+
+1. Other documentation....
+==========================
+
+   - Project Home Pages
+     - http://www.chygwyn.com/				   - Kernel info
+     - http://linux-decnet.sourceforge.net/                - Userland tools
+     - http://www.sourceforge.net/projects/linux-decnet/   - Status page
+
+2. Configuring the kernel
+=========================
+
+Be sure to turn on the following options:
+
+    - CONFIG_DECNET (obviously)
+    - CONFIG_PROC_FS (to see what's going on)
+    - CONFIG_SYSCTL (for easy configuration)
+
+if you want to try out router support (not properly debugged yet)
+you'll need the following options as well...
+
+    - CONFIG_DECNET_ROUTER (to be able to add/delete routes)
+    - CONFIG_NETFILTER (will be required for the DECnet routing daemon)
+
+Don't turn on SIOCGIFCONF support for DECnet unless you are really sure
+that you need it, in general you won't and it can cause ifconfig to
+malfunction.
+
+Run time configuration has changed slightly from the 2.4 system. If you
+want to configure an endnode, then the simplified procedure is as follows:
+
+ - Set the MAC address on your ethernet card before starting _any_ other
+   network protocols.
+
+As soon as your network card is brought into the UP state, DECnet should
+start working. If you need something more complicated or are unsure how
+to set the MAC address, see the next section. Also all configurations which
+worked with 2.4 will work under 2.5 with no change.
+
+3. Command line options
+=======================
+
+You can set a DECnet address on the kernel command line for compatibility
+with the 2.4 configuration procedure, but in general it's not needed any more.
+If you do st a DECnet address on the command line, it has only one purpose
+which is that its added to the addresses on the loopback device.
+
+With 2.4 kernels, DECnet would only recognise addresses as local if they
+were added to the loopback device. In 2.5, any local interface address
+can be used to loop back to the local machine. Of course this does not
+prevent you adding further addresses to the loopback device if you
+want to.
+
+N.B. Since the address list of an interface determines the addresses for
+which "hello" messages are sent, if you don't set an address on the loopback
+interface then you won't see any entries in /proc/net/neigh for the local
+host until such time as you start a connection. This doesn't affect the
+operation of the local communications in any other way though.
+
+The kernel command line takes options looking like the following::
+
+    decnet.addr=1,2
+
+the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels
+and early 2.3.xx kernels, you must use a comma when specifying the
+DECnet address like this. For more recent 2.3.xx kernels, you may
+use almost any character except space, although a `.` would be the most
+obvious choice :-)
+
+There used to be a third number specifying the node type. This option
+has gone away in favour of a per interface node type. This is now set
+using /proc/sys/net/decnet/conf/<dev>/forwarding. This file can be
+set with a single digit, 0=EndNode, 1=L1 Router and  2=L2 Router.
+
+There are also equivalent options for modules. The node address can
+also be set through the /proc/sys/net/decnet/ files, as can other system
+parameters.
+
+Currently the only supported devices are ethernet and ip_gre. The
+ethernet address of your ethernet card has to be set according to the DECnet
+address of the node in order for it to be autoconfigured (and then appear in
+/proc/net/decnet_dev). There is a utility available at the above
+FTP sites called dn2ethaddr which can compute the correct ethernet
+address to use. The address can be set by ifconfig either before or
+at the time the device is brought up. If you are using RedHat you can
+add the line::
+
+    MACADDR=AA:00:04:00:03:04
+
+or something similar, to /etc/sysconfig/network-scripts/ifcfg-eth0 or
+wherever your network card's configuration lives. Setting the MAC address
+of your ethernet card to an address starting with "hi-ord" will cause a
+DECnet address which matches to be added to the interface (which you can
+verify with iproute2).
+
+The default device for routing can be set through the /proc filesystem
+by setting /proc/sys/net/decnet/default_device to the
+device you want DECnet to route packets out of when no specific route
+is available. Usually this will be eth0, for example::
+
+    echo -n "eth0" >/proc/sys/net/decnet/default_device
+
+If you don't set the default device, then it will default to the first
+ethernet card which has been autoconfigured as described above. You can
+confirm that by looking in the default_device file of course.
+
+There is a list of what the other files under /proc/sys/net/decnet/ do
+on the kernel patch web site (shown above).
+
+4. Run time kernel configuration
+================================
+
+
+This is either done through the sysctl/proc interface (see the kernel web
+pages for details on what the various options do) or through the iproute2
+package in the same way as IPv4/6 configuration is performed.
+
+Documentation for iproute2 is included with the package, although there is
+as yet no specific section on DECnet, most of the features apply to both
+IP and DECnet, albeit with DECnet addresses instead of IP addresses and
+a reduced functionality.
+
+If you want to configure a DECnet router you'll need the iproute2 package
+since its the _only_ way to add and delete routes currently. Eventually
+there will be a routing daemon to send and receive routing messages for
+each interface and update the kernel routing tables accordingly. The
+routing daemon will use netfilter to listen to routing packets, and
+rtnetlink to update the kernels routing tables.
+
+The DECnet raw socket layer has been removed since it was there purely
+for use by the routing daemon which will now use netfilter (a much cleaner
+and more generic solution) instead.
+
+5. How can I tell if its working?
+=================================
+
+Here is a quick guide of what to look for in order to know if your DECnet
+kernel subsystem is working.
+
+   - Is the node address set (see /proc/sys/net/decnet/node_address)
+   - Is the node of the correct type
+     (see /proc/sys/net/decnet/conf/<dev>/forwarding)
+   - Is the Ethernet MAC address of each Ethernet card set to match
+     the DECnet address. If in doubt use the dn2ethaddr utility available
+     at the ftp archive.
+   - If the previous two steps are satisfied, and the Ethernet card is up,
+     you should find that it is listed in /proc/net/decnet_dev and also
+     that it appears as a directory in /proc/sys/net/decnet/conf/. The
+     loopback device (lo) should also appear and is required to communicate
+     within a node.
+   - If you have any DECnet routers on your network, they should appear
+     in /proc/net/decnet_neigh, otherwise this file will only contain the
+     entry for the node itself (if it doesn't check to see if lo is up).
+   - If you want to send to any node which is not listed in the
+     /proc/net/decnet_neigh file, you'll need to set the default device
+     to point to an Ethernet card with connection to a router. This is
+     again done with the /proc/sys/net/decnet/default_device file.
+   - Try starting a simple server and client, like the dnping/dnmirror
+     over the loopback interface. With luck they should communicate.
+     For this step and those after, you'll need the DECnet library
+     which can be obtained from the above ftp sites as well as the
+     actual utilities themselves.
+   - If this seems to work, then try talking to a node on your local
+     network, and see if you can obtain the same results.
+   - At this point you are on your own... :-)
+
+6. How to send a bug report
+===========================
+
+If you've found a bug and want to report it, then there are several things
+you can do to help me work out exactly what it is that is wrong. Useful
+information (_most_ of which _is_ _essential_) includes:
+
+ - What kernel version are you running ?
+ - What version of the patch are you running ?
+ - How far though the above set of tests can you get ?
+ - What is in the /proc/decnet* files and /proc/sys/net/decnet/* files ?
+ - Which services are you running ?
+ - Which client caused the problem ?
+ - How much data was being transferred ?
+ - Was the network congested ?
+ - How can the problem be reproduced ?
+ - Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of
+   tcpdump don't understand how to dump DECnet properly, so including
+   the hex listing of the packet contents is _essential_, usually the -x flag.
+   You may also need to increase the length grabbed with the -s flag. The
+   -e flag also provides very useful information (ethernet MAC addresses))
+
+7. MAC FAQ
+==========
+
+A quick FAQ on ethernet MAC addresses to explain how Linux and DECnet
+interact and how to get the best performance from your hardware.
+
+Ethernet cards are designed to normally only pass received network frames
+to a host computer when they are addressed to it, or to the broadcast address.
+
+Linux has an interface which allows the setting of extra addresses for
+an ethernet card to listen to. If the ethernet card supports it, the
+filtering operation will be done in hardware, if not the extra unwanted packets
+received will be discarded by the host computer. In the latter case,
+significant processor time and bus bandwidth can be used up on a busy
+network (see the NAPI documentation for a longer explanation of these
+effects).
+
+DECnet makes use of this interface to allow running DECnet on an ethernet
+card which has already been configured using TCP/IP (presumably using the
+built in MAC address of the card, as usual) and/or to allow multiple DECnet
+addresses on each physical interface. If you do this, be aware that if your
+ethernet card doesn't support perfect hashing in its MAC address filter
+then your computer will be doing more work than required. Some cards
+will simply set themselves into promiscuous mode in order to receive
+packets from the DECnet specified addresses. So if you have one of these
+cards its better to set the MAC address of the card as described above
+to gain the best efficiency. Better still is to use a card which supports
+NAPI as well.
+
+
+8. Mailing list
+===============
+
+If you are keen to get involved in development, or want to ask questions
+about configuration, or even just report bugs, then there is a mailing
+list that you can join, details are at:
+
+http://sourceforge.net/mail/?group_id=4993
+
+9. Legal Info
+=============
+
+The Linux DECnet project team have placed their code under the GPL. The
+software is provided "as is" and without warranty express or implied.
+DECnet is a trademark of Compaq. This software is not a product of
+Compaq. We acknowledge the help of people at Compaq in providing extra
+documentation above and beyond what was previously publicly available.
+
+Steve Whitehouse <SteveW@ACM.org>
+
diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt
deleted file mode 100644
index d192f8b9948b..000000000000
--- a/Documentation/networking/decnet.txt
+++ /dev/null
@@ -1,230 +0,0 @@
-                    Linux DECnet Networking Layer Information
-                   ===========================================
-
-1) Other documentation....
-
-   o Project Home Pages
-       http://www.chygwyn.com/                      	    - Kernel info
-       http://linux-decnet.sourceforge.net/                - Userland tools
-       http://www.sourceforge.net/projects/linux-decnet/   - Status page
-
-2) Configuring the kernel
-
-Be sure to turn on the following options:
-
-    CONFIG_DECNET (obviously)
-    CONFIG_PROC_FS (to see what's going on)
-    CONFIG_SYSCTL (for easy configuration)
-
-if you want to try out router support (not properly debugged yet)
-you'll need the following options as well...
-
-    CONFIG_DECNET_ROUTER (to be able to add/delete routes)
-    CONFIG_NETFILTER (will be required for the DECnet routing daemon)
-
-Don't turn on SIOCGIFCONF support for DECnet unless you are really sure
-that you need it, in general you won't and it can cause ifconfig to
-malfunction.
-
-Run time configuration has changed slightly from the 2.4 system. If you
-want to configure an endnode, then the simplified procedure is as follows:
-
- o Set the MAC address on your ethernet card before starting _any_ other
-   network protocols.
-
-As soon as your network card is brought into the UP state, DECnet should
-start working. If you need something more complicated or are unsure how
-to set the MAC address, see the next section. Also all configurations which
-worked with 2.4 will work under 2.5 with no change.
-
-3) Command line options
-
-You can set a DECnet address on the kernel command line for compatibility
-with the 2.4 configuration procedure, but in general it's not needed any more.
-If you do st a DECnet address on the command line, it has only one purpose
-which is that its added to the addresses on the loopback device.
-
-With 2.4 kernels, DECnet would only recognise addresses as local if they
-were added to the loopback device. In 2.5, any local interface address
-can be used to loop back to the local machine. Of course this does not
-prevent you adding further addresses to the loopback device if you
-want to.
-
-N.B. Since the address list of an interface determines the addresses for
-which "hello" messages are sent, if you don't set an address on the loopback
-interface then you won't see any entries in /proc/net/neigh for the local
-host until such time as you start a connection. This doesn't affect the
-operation of the local communications in any other way though.
-
-The kernel command line takes options looking like the following:
-
-    decnet.addr=1,2
-
-the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels
-and early 2.3.xx kernels, you must use a comma when specifying the
-DECnet address like this. For more recent 2.3.xx kernels, you may
-use almost any character except space, although a `.` would be the most
-obvious choice :-)
-
-There used to be a third number specifying the node type. This option
-has gone away in favour of a per interface node type. This is now set
-using /proc/sys/net/decnet/conf/<dev>/forwarding. This file can be
-set with a single digit, 0=EndNode, 1=L1 Router and  2=L2 Router.
-
-There are also equivalent options for modules. The node address can
-also be set through the /proc/sys/net/decnet/ files, as can other system
-parameters.
-
-Currently the only supported devices are ethernet and ip_gre. The
-ethernet address of your ethernet card has to be set according to the DECnet
-address of the node in order for it to be autoconfigured (and then appear in
-/proc/net/decnet_dev). There is a utility available at the above
-FTP sites called dn2ethaddr which can compute the correct ethernet
-address to use. The address can be set by ifconfig either before or
-at the time the device is brought up. If you are using RedHat you can
-add the line:
-
-    MACADDR=AA:00:04:00:03:04
-
-or something similar, to /etc/sysconfig/network-scripts/ifcfg-eth0 or
-wherever your network card's configuration lives. Setting the MAC address
-of your ethernet card to an address starting with "hi-ord" will cause a
-DECnet address which matches to be added to the interface (which you can
-verify with iproute2).
-
-The default device for routing can be set through the /proc filesystem
-by setting /proc/sys/net/decnet/default_device to the
-device you want DECnet to route packets out of when no specific route
-is available. Usually this will be eth0, for example:
-
-    echo -n "eth0" >/proc/sys/net/decnet/default_device
-
-If you don't set the default device, then it will default to the first
-ethernet card which has been autoconfigured as described above. You can
-confirm that by looking in the default_device file of course.
-
-There is a list of what the other files under /proc/sys/net/decnet/ do
-on the kernel patch web site (shown above).
-
-4) Run time kernel configuration
-
-This is either done through the sysctl/proc interface (see the kernel web
-pages for details on what the various options do) or through the iproute2
-package in the same way as IPv4/6 configuration is performed.
-
-Documentation for iproute2 is included with the package, although there is
-as yet no specific section on DECnet, most of the features apply to both
-IP and DECnet, albeit with DECnet addresses instead of IP addresses and
-a reduced functionality.
-
-If you want to configure a DECnet router you'll need the iproute2 package
-since its the _only_ way to add and delete routes currently. Eventually
-there will be a routing daemon to send and receive routing messages for
-each interface and update the kernel routing tables accordingly. The
-routing daemon will use netfilter to listen to routing packets, and
-rtnetlink to update the kernels routing tables. 
-
-The DECnet raw socket layer has been removed since it was there purely
-for use by the routing daemon which will now use netfilter (a much cleaner
-and more generic solution) instead.
-
-5) How can I tell if its working ?
-
-Here is a quick guide of what to look for in order to know if your DECnet
-kernel subsystem is working.
-
-   - Is the node address set (see /proc/sys/net/decnet/node_address)
-   - Is the node of the correct type 
-                             (see /proc/sys/net/decnet/conf/<dev>/forwarding)
-   - Is the Ethernet MAC address of each Ethernet card set to match
-     the DECnet address. If in doubt use the dn2ethaddr utility available
-     at the ftp archive.
-   - If the previous two steps are satisfied, and the Ethernet card is up,
-     you should find that it is listed in /proc/net/decnet_dev and also
-     that it appears as a directory in /proc/sys/net/decnet/conf/. The
-     loopback device (lo) should also appear and is required to communicate
-     within a node.
-   - If you have any DECnet routers on your network, they should appear
-     in /proc/net/decnet_neigh, otherwise this file will only contain the
-     entry for the node itself (if it doesn't check to see if lo is up).
-   - If you want to send to any node which is not listed in the
-     /proc/net/decnet_neigh file, you'll need to set the default device
-     to point to an Ethernet card with connection to a router. This is
-     again done with the /proc/sys/net/decnet/default_device file.
-   - Try starting a simple server and client, like the dnping/dnmirror
-     over the loopback interface. With luck they should communicate.
-     For this step and those after, you'll need the DECnet library
-     which can be obtained from the above ftp sites as well as the
-     actual utilities themselves.
-   - If this seems to work, then try talking to a node on your local
-     network, and see if you can obtain the same results.
-   - At this point you are on your own... :-)
-
-6) How to send a bug report
-
-If you've found a bug and want to report it, then there are several things
-you can do to help me work out exactly what it is that is wrong. Useful
-information (_most_ of which _is_ _essential_) includes:
-
- - What kernel version are you running ?
- - What version of the patch are you running ?
- - How far though the above set of tests can you get ?
- - What is in the /proc/decnet* files and /proc/sys/net/decnet/* files ?
- - Which services are you running ?
- - Which client caused the problem ?
- - How much data was being transferred ?
- - Was the network congested ?
- - How can the problem be reproduced ?
- - Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of 
-   tcpdump don't understand how to dump DECnet properly, so including
-   the hex listing of the packet contents is _essential_, usually the -x flag.
-   You may also need to increase the length grabbed with the -s flag. The
-   -e flag also provides very useful information (ethernet MAC addresses))
-
-7) MAC FAQ
-
-A quick FAQ on ethernet MAC addresses to explain how Linux and DECnet
-interact and how to get the best performance from your hardware. 
-
-Ethernet cards are designed to normally only pass received network frames 
-to a host computer when they are addressed to it, or to the broadcast address.
-
-Linux has an interface which allows the setting of extra addresses for
-an ethernet card to listen to. If the ethernet card supports it, the
-filtering operation will be done in hardware, if not the extra unwanted packets
-received will be discarded by the host computer. In the latter case,
-significant processor time and bus bandwidth can be used up on a busy
-network (see the NAPI documentation for a longer explanation of these
-effects).
-
-DECnet makes use of this interface to allow running DECnet on an ethernet 
-card which has already been configured using TCP/IP (presumably using the 
-built in MAC address of the card, as usual) and/or to allow multiple DECnet
-addresses on each physical interface. If you do this, be aware that if your
-ethernet card doesn't support perfect hashing in its MAC address filter
-then your computer will be doing more work than required. Some cards
-will simply set themselves into promiscuous mode in order to receive
-packets from the DECnet specified addresses. So if you have one of these
-cards its better to set the MAC address of the card as described above
-to gain the best efficiency. Better still is to use a card which supports
-NAPI as well.
-
-
-8) Mailing list
-
-If you are keen to get involved in development, or want to ask questions
-about configuration, or even just report bugs, then there is a mailing
-list that you can join, details are at:
-
-http://sourceforge.net/mail/?group_id=4993
-
-9) Legal Info
-
-The Linux DECnet project team have placed their code under the GPL. The
-software is provided "as is" and without warranty express or implied.
-DECnet is a trademark of Compaq. This software is not a product of
-Compaq. We acknowledge the help of people at Compaq in providing extra
-documentation above and beyond what was previously publicly available.
-
-Steve Whitehouse <SteveW@ACM.org>
-
diff --git a/Documentation/networking/defza.rst b/Documentation/networking/defza.rst
new file mode 100644
index 000000000000..73c2f793ea26
--- /dev/null
+++ b/Documentation/networking/defza.rst
@@ -0,0 +1,63 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================================
+Notes on the DEC FDDIcontroller 700 (DEFZA-xx) driver
+=====================================================
+
+:Version: v.1.1.4
+
+
+DEC FDDIcontroller 700 is DEC's first-generation TURBOchannel FDDI
+network card, designed in 1990 specifically for the DECstation 5000
+model 200 workstation.  The board is a single attachment station and
+it was manufactured in two variations, both of which are supported.
+
+First is the SAS MMF DEFZA-AA option, the original design implementing
+the standard MMF-PMD, however with a pair of ST connectors rather than
+the usual MIC connector.  The other one is the SAS ThinWire/STP DEFZA-CA
+option, denoted 700-C, with the network medium selectable by a switch
+between the DEC proprietary ThinWire-PMD using a BNC connector and the
+standard STP-PMD using a DE-9F connector.  This option can interface to
+a DECconcentrator 500 device and, in the case of the STP-PMD, also other
+FDDI equipment and was designed to make it easier to transition from
+existing IEEE 802.3 10BASE2 Ethernet and IEEE 802.5 Token Ring networks
+by providing means to reuse existing cabling.
+
+This driver handles any number of cards installed in a single system.
+They get fddi0, fddi1, etc. interface names assigned in the order of
+increasing TURBOchannel slot numbers.
+
+The board only supports DMA on the receive side.  Transmission involves
+the use of PIO.  As a result under a heavy transmission load there will
+be a significant impact on system performance.
+
+The board supports a 64-entry CAM for matching destination addresses.
+Two entries are preoccupied by the Directed Beacon and Ring Purger
+multicast addresses and the rest is used as a multicast filter.  An
+all-multi mode is also supported for LLC frames and it is used if
+requested explicitly or if the CAM overflows.  The promiscuous mode
+supports separate enables for LLC and SMT frames, but this driver
+doesn't support changing them individually.
+
+
+Known problems:
+
+None.
+
+
+To do:
+
+5. MAC address change.  The card does not support changing the Media
+   Access Controller's address registers but a similar effect can be
+   achieved by adding an alias to the CAM.  There is no way to disable
+   matching against the original address though.
+
+7. Queueing incoming/outgoing SMT frames in the driver if the SMT
+   receive/RMC transmit ring is full. (?)
+
+8. Retrieving/reporting FDDI/SNMP stats.
+
+
+Both success and failure reports are welcome.
+
+Maciej W. Rozycki  <macro@linux-mips.org>
diff --git a/Documentation/networking/defza.txt b/Documentation/networking/defza.txt
deleted file mode 100644
index 663e4a906751..000000000000
--- a/Documentation/networking/defza.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Notes on the DEC FDDIcontroller 700 (DEFZA-xx) driver v.1.1.4.
-
-
-DEC FDDIcontroller 700 is DEC's first-generation TURBOchannel FDDI
-network card, designed in 1990 specifically for the DECstation 5000
-model 200 workstation.  The board is a single attachment station and
-it was manufactured in two variations, both of which are supported.
-
-First is the SAS MMF DEFZA-AA option, the original design implementing
-the standard MMF-PMD, however with a pair of ST connectors rather than
-the usual MIC connector.  The other one is the SAS ThinWire/STP DEFZA-CA
-option, denoted 700-C, with the network medium selectable by a switch
-between the DEC proprietary ThinWire-PMD using a BNC connector and the
-standard STP-PMD using a DE-9F connector.  This option can interface to
-a DECconcentrator 500 device and, in the case of the STP-PMD, also other
-FDDI equipment and was designed to make it easier to transition from
-existing IEEE 802.3 10BASE2 Ethernet and IEEE 802.5 Token Ring networks
-by providing means to reuse existing cabling.
-
-This driver handles any number of cards installed in a single system.
-They get fddi0, fddi1, etc. interface names assigned in the order of
-increasing TURBOchannel slot numbers.
-
-The board only supports DMA on the receive side.  Transmission involves
-the use of PIO.  As a result under a heavy transmission load there will
-be a significant impact on system performance.
-
-The board supports a 64-entry CAM for matching destination addresses.
-Two entries are preoccupied by the Directed Beacon and Ring Purger
-multicast addresses and the rest is used as a multicast filter.  An
-all-multi mode is also supported for LLC frames and it is used if
-requested explicitly or if the CAM overflows.  The promiscuous mode
-supports separate enables for LLC and SMT frames, but this driver
-doesn't support changing them individually.
-
-
-Known problems:
-
-None.
-
-
-To do:
-
-5. MAC address change.  The card does not support changing the Media
-   Access Controller's address registers but a similar effect can be
-   achieved by adding an alias to the CAM.  There is no way to disable
-   matching against the original address though.
-
-7. Queueing incoming/outgoing SMT frames in the driver if the SMT
-   receive/RMC transmit ring is full. (?)
-
-8. Retrieving/reporting FDDI/SNMP stats.
-
-
-Both success and failure reports are welcome.
-
-Maciej W. Rozycki  <macro@linux-mips.org>
diff --git a/Documentation/networking/device_drivers/intel/e100.rst b/Documentation/networking/device_drivers/intel/e100.rst
index caf023cc88de..3ac21e7119a7 100644
--- a/Documentation/networking/device_drivers/intel/e100.rst
+++ b/Documentation/networking/device_drivers/intel/e100.rst
@@ -33,7 +33,7 @@ The following features are now available in supported kernels:
  - SNMP
 
 Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
+/Documentation/networking/bonding.rst
 
 
 Identifying Your Adapter
diff --git a/Documentation/networking/device_drivers/intel/ixgb.rst b/Documentation/networking/device_drivers/intel/ixgb.rst
index 945018207a92..ab624f1a44a8 100644
--- a/Documentation/networking/device_drivers/intel/ixgb.rst
+++ b/Documentation/networking/device_drivers/intel/ixgb.rst
@@ -37,7 +37,7 @@ The following features are available in this kernel:
  - SNMP
 
 Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
+/Documentation/networking/bonding.rst
 
 The driver information previously displayed in the /proc filesystem is not
 supported in this release.  Alternatively, you can use ethtool (version 1.6
diff --git a/Documentation/networking/dns_resolver.rst b/Documentation/networking/dns_resolver.rst
new file mode 100644
index 000000000000..add4d59a99a5
--- /dev/null
+++ b/Documentation/networking/dns_resolver.rst
@@ -0,0 +1,155 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+DNS Resolver Module
+===================
+
+.. Contents:
+
+ - Overview.
+ - Compilation.
+ - Setting up.
+ - Usage.
+ - Mechanism.
+ - Debugging.
+
+
+Overview
+========
+
+The DNS resolver module provides a way for kernel services to make DNS queries
+by way of requesting a key of key type dns_resolver.  These queries are
+upcalled to userspace through /sbin/request-key.
+
+These routines must be supported by userspace tools dns.upcall, cifs.upcall and
+request-key.  It is under development and does not yet provide the full feature
+set.  The features it does support include:
+
+ (*) Implements the dns_resolver key_type to contact userspace.
+
+It does not yet support the following AFS features:
+
+ (*) Dns query support for AFSDB resource record.
+
+This code is extracted from the CIFS filesystem.
+
+
+Compilation
+===========
+
+The module should be enabled by turning on the kernel configuration options::
+
+	CONFIG_DNS_RESOLVER	- tristate "DNS Resolver support"
+
+
+Setting up
+==========
+
+To set up this facility, the /etc/request-key.conf file must be altered so that
+/sbin/request-key can appropriately direct the upcalls.  For example, to handle
+basic dname to IPv4/IPv6 address resolution, the following line should be
+added::
+
+
+	#OP	TYPE		DESC	CO-INFO	PROGRAM ARG1 ARG2 ARG3 ...
+	#======	============	=======	=======	==========================
+	create	dns_resolver  	*	*	/usr/sbin/cifs.upcall %k
+
+To direct a query for query type 'foo', a line of the following should be added
+before the more general line given above as the first match is the one taken::
+
+	create	dns_resolver  	foo:*	*	/usr/sbin/dns.foo %k
+
+
+Usage
+=====
+
+To make use of this facility, one of the following functions that are
+implemented in the module can be called after doing::
+
+	#include <linux/dns_resolver.h>
+
+     ::
+
+	int dns_query(const char *type, const char *name, size_t namelen,
+		     const char *options, char **_result, time_t *_expiry);
+
+     This is the basic access function.  It looks for a cached DNS query and if
+     it doesn't find it, it upcalls to userspace to make a new DNS query, which
+     may then be cached.  The key description is constructed as a string of the
+     form::
+
+		[<type>:]<name>
+
+     where <type> optionally specifies the particular upcall program to invoke,
+     and thus the type of query to do, and <name> specifies the string to be
+     looked up.  The default query type is a straight hostname to IP address
+     set lookup.
+
+     The name parameter is not required to be a NUL-terminated string, and its
+     length should be given by the namelen argument.
+
+     The options parameter may be NULL or it may be a set of options
+     appropriate to the query type.
+
+     The return value is a string appropriate to the query type.  For instance,
+     for the default query type it is just a list of comma-separated IPv4 and
+     IPv6 addresses.  The caller must free the result.
+
+     The length of the result string is returned on success, and a negative
+     error code is returned otherwise.  -EKEYREJECTED will be returned if the
+     DNS lookup failed.
+
+     If _expiry is non-NULL, the expiry time (TTL) of the result will be
+     returned also.
+
+The kernel maintains an internal keyring in which it caches looked up keys.
+This can be cleared by any process that has the CAP_SYS_ADMIN capability by
+the use of KEYCTL_KEYRING_CLEAR on the keyring ID.
+
+
+Reading DNS Keys from Userspace
+===============================
+
+Keys of dns_resolver type can be read from userspace using keyctl_read() or
+"keyctl read/print/pipe".
+
+
+Mechanism
+=========
+
+The dnsresolver module registers a key type called "dns_resolver".  Keys of
+this type are used to transport and cache DNS lookup results from userspace.
+
+When dns_query() is invoked, it calls request_key() to search the local
+keyrings for a cached DNS result.  If that fails to find one, it upcalls to
+userspace to get a new result.
+
+Upcalls to userspace are made through the request_key() upcall vector, and are
+directed by means of configuration lines in /etc/request-key.conf that tell
+/sbin/request-key what program to run to instantiate the key.
+
+The upcall handler program is responsible for querying the DNS, processing the
+result into a form suitable for passing to the keyctl_instantiate_key()
+routine.  This then passes the data to dns_resolver_instantiate() which strips
+off and processes any options included in the data, and then attaches the
+remainder of the string to the key as its payload.
+
+The upcall handler program should set the expiry time on the key to that of the
+lowest TTL of all the records it has extracted a result from.  This means that
+the key will be discarded and recreated when the data it holds has expired.
+
+dns_query() returns a copy of the value attached to the key, or an error if
+that is indicated instead.
+
+See <file:Documentation/security/keys/request-key.rst> for further
+information about request-key function.
+
+
+Debugging
+=========
+
+Debugging messages can be turned on dynamically by writing a 1 into the
+following file::
+
+	/sys/module/dnsresolver/parameters/debug
diff --git a/Documentation/networking/dns_resolver.txt b/Documentation/networking/dns_resolver.txt
deleted file mode 100644
index eaa8f9a6fd5d..000000000000
--- a/Documentation/networking/dns_resolver.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-			     ===================
-			     DNS Resolver Module
-			     ===================
-
-Contents:
-
- - Overview.
- - Compilation.
- - Setting up.
- - Usage.
- - Mechanism.
- - Debugging.
-
-
-========
-OVERVIEW
-========
-
-The DNS resolver module provides a way for kernel services to make DNS queries
-by way of requesting a key of key type dns_resolver.  These queries are
-upcalled to userspace through /sbin/request-key.
-
-These routines must be supported by userspace tools dns.upcall, cifs.upcall and
-request-key.  It is under development and does not yet provide the full feature
-set.  The features it does support include:
-
- (*) Implements the dns_resolver key_type to contact userspace.
-
-It does not yet support the following AFS features:
-
- (*) Dns query support for AFSDB resource record.
-
-This code is extracted from the CIFS filesystem.
-
-
-===========
-COMPILATION
-===========
-
-The module should be enabled by turning on the kernel configuration options:
-
-	CONFIG_DNS_RESOLVER	- tristate "DNS Resolver support"
-
-
-==========
-SETTING UP
-==========
-
-To set up this facility, the /etc/request-key.conf file must be altered so that
-/sbin/request-key can appropriately direct the upcalls.  For example, to handle
-basic dname to IPv4/IPv6 address resolution, the following line should be
-added:
-
-	#OP	TYPE		DESC	CO-INFO	PROGRAM ARG1 ARG2 ARG3 ...
-	#======	============	=======	=======	==========================
-	create	dns_resolver  	*	*	/usr/sbin/cifs.upcall %k
-
-To direct a query for query type 'foo', a line of the following should be added
-before the more general line given above as the first match is the one taken.
-
-	create	dns_resolver  	foo:*	*	/usr/sbin/dns.foo %k
-
-
-=====
-USAGE
-=====
-
-To make use of this facility, one of the following functions that are
-implemented in the module can be called after doing:
-
-	#include <linux/dns_resolver.h>
-
- (1) int dns_query(const char *type, const char *name, size_t namelen,
-		   const char *options, char **_result, time_t *_expiry);
-
-     This is the basic access function.  It looks for a cached DNS query and if
-     it doesn't find it, it upcalls to userspace to make a new DNS query, which
-     may then be cached.  The key description is constructed as a string of the
-     form:
-
-		[<type>:]<name>
-
-     where <type> optionally specifies the particular upcall program to invoke,
-     and thus the type of query to do, and <name> specifies the string to be
-     looked up.  The default query type is a straight hostname to IP address
-     set lookup.
-
-     The name parameter is not required to be a NUL-terminated string, and its
-     length should be given by the namelen argument.
-
-     The options parameter may be NULL or it may be a set of options
-     appropriate to the query type.
-
-     The return value is a string appropriate to the query type.  For instance,
-     for the default query type it is just a list of comma-separated IPv4 and
-     IPv6 addresses.  The caller must free the result.
-
-     The length of the result string is returned on success, and a negative
-     error code is returned otherwise.  -EKEYREJECTED will be returned if the
-     DNS lookup failed.
-
-     If _expiry is non-NULL, the expiry time (TTL) of the result will be
-     returned also.
-
-The kernel maintains an internal keyring in which it caches looked up keys.
-This can be cleared by any process that has the CAP_SYS_ADMIN capability by
-the use of KEYCTL_KEYRING_CLEAR on the keyring ID.
-
-
-===============================
-READING DNS KEYS FROM USERSPACE
-===============================
-
-Keys of dns_resolver type can be read from userspace using keyctl_read() or
-"keyctl read/print/pipe".
-
-
-=========
-MECHANISM
-=========
-
-The dnsresolver module registers a key type called "dns_resolver".  Keys of
-this type are used to transport and cache DNS lookup results from userspace.
-
-When dns_query() is invoked, it calls request_key() to search the local
-keyrings for a cached DNS result.  If that fails to find one, it upcalls to
-userspace to get a new result.
-
-Upcalls to userspace are made through the request_key() upcall vector, and are
-directed by means of configuration lines in /etc/request-key.conf that tell
-/sbin/request-key what program to run to instantiate the key.
-
-The upcall handler program is responsible for querying the DNS, processing the
-result into a form suitable for passing to the keyctl_instantiate_key()
-routine.  This then passes the data to dns_resolver_instantiate() which strips
-off and processes any options included in the data, and then attaches the
-remainder of the string to the key as its payload.
-
-The upcall handler program should set the expiry time on the key to that of the
-lowest TTL of all the records it has extracted a result from.  This means that
-the key will be discarded and recreated when the data it holds has expired.
-
-dns_query() returns a copy of the value attached to the key, or an error if
-that is indicated instead.
-
-See <file:Documentation/security/keys/request-key.rst> for further
-information about request-key function.
-
-
-=========
-DEBUGGING
-=========
-
-Debugging messages can be turned on dynamically by writing a 1 into the
-following file:
-
-        /sys/module/dnsresolver/parameters/debug
diff --git a/Documentation/networking/driver.rst b/Documentation/networking/driver.rst
new file mode 100644
index 000000000000..c8f59dbda46f
--- /dev/null
+++ b/Documentation/networking/driver.rst
@@ -0,0 +1,97 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Softnet Driver Issues
+=====================
+
+Transmit path guidelines:
+
+1) The ndo_start_xmit method must not return NETDEV_TX_BUSY under
+   any normal circumstances.  It is considered a hard error unless
+   there is no way your device can tell ahead of time when it's
+   transmit function will become busy.
+
+   Instead it must maintain the queue properly.  For example,
+   for a driver implementing scatter-gather this means::
+
+	static netdev_tx_t drv_hard_start_xmit(struct sk_buff *skb,
+					       struct net_device *dev)
+	{
+		struct drv *dp = netdev_priv(dev);
+
+		lock_tx(dp);
+		...
+		/* This is a hard error log it. */
+		if (TX_BUFFS_AVAIL(dp) <= (skb_shinfo(skb)->nr_frags + 1)) {
+			netif_stop_queue(dev);
+			unlock_tx(dp);
+			printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
+			       dev->name);
+			return NETDEV_TX_BUSY;
+		}
+
+		... queue packet to card ...
+		... update tx consumer index ...
+
+		if (TX_BUFFS_AVAIL(dp) <= (MAX_SKB_FRAGS + 1))
+			netif_stop_queue(dev);
+
+		...
+		unlock_tx(dp);
+		...
+		return NETDEV_TX_OK;
+	}
+
+   And then at the end of your TX reclamation event handling::
+
+	if (netif_queue_stopped(dp->dev) &&
+	    TX_BUFFS_AVAIL(dp) > (MAX_SKB_FRAGS + 1))
+		netif_wake_queue(dp->dev);
+
+   For a non-scatter-gather supporting card, the three tests simply become::
+
+		/* This is a hard error log it. */
+		if (TX_BUFFS_AVAIL(dp) <= 0)
+
+   and::
+
+		if (TX_BUFFS_AVAIL(dp) == 0)
+
+   and::
+
+	if (netif_queue_stopped(dp->dev) &&
+	    TX_BUFFS_AVAIL(dp) > 0)
+		netif_wake_queue(dp->dev);
+
+2) An ndo_start_xmit method must not modify the shared parts of a
+   cloned SKB.
+
+3) Do not forget that once you return NETDEV_TX_OK from your
+   ndo_start_xmit method, it is your driver's responsibility to free
+   up the SKB and in some finite amount of time.
+
+   For example, this means that it is not allowed for your TX
+   mitigation scheme to let TX packets "hang out" in the TX
+   ring unreclaimed forever if no new TX packets are sent.
+   This error can deadlock sockets waiting for send buffer room
+   to be freed up.
+
+   If you return NETDEV_TX_BUSY from the ndo_start_xmit method, you
+   must not keep any reference to that SKB and you must not attempt
+   to free it up.
+
+Probing guidelines:
+
+1) Any hardware layer address you obtain for your device should
+   be verified.  For example, for ethernet check it with
+   linux/etherdevice.h:is_valid_ether_addr()
+
+Close/stop guidelines:
+
+1) After the ndo_stop routine has been called, the hardware must
+   not receive or transmit any data.  All in flight packets must
+   be aborted. If necessary, poll or wait for completion of
+   any reset commands.
+
+2) The ndo_stop routine will be called by unregister_netdevice
+   if device is still UP.
diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt
deleted file mode 100644
index da59e2884130..000000000000
--- a/Documentation/networking/driver.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Document about softnet driver issues
-
-Transmit path guidelines:
-
-1) The ndo_start_xmit method must not return NETDEV_TX_BUSY under
-   any normal circumstances.  It is considered a hard error unless
-   there is no way your device can tell ahead of time when it's
-   transmit function will become busy.
-
-   Instead it must maintain the queue properly.  For example,
-   for a driver implementing scatter-gather this means:
-
-	static netdev_tx_t drv_hard_start_xmit(struct sk_buff *skb,
-					       struct net_device *dev)
-	{
-		struct drv *dp = netdev_priv(dev);
-
-		lock_tx(dp);
-		...
-		/* This is a hard error log it. */
-		if (TX_BUFFS_AVAIL(dp) <= (skb_shinfo(skb)->nr_frags + 1)) {
-			netif_stop_queue(dev);
-			unlock_tx(dp);
-			printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
-			       dev->name);
-			return NETDEV_TX_BUSY;
-		}
-
-		... queue packet to card ...
-		... update tx consumer index ...
-
-		if (TX_BUFFS_AVAIL(dp) <= (MAX_SKB_FRAGS + 1))
-			netif_stop_queue(dev);
-
-		...
-		unlock_tx(dp);
-		...
-		return NETDEV_TX_OK;
-	}
-
-   And then at the end of your TX reclamation event handling:
-
-	if (netif_queue_stopped(dp->dev) &&
-            TX_BUFFS_AVAIL(dp) > (MAX_SKB_FRAGS + 1))
-		netif_wake_queue(dp->dev);
-
-   For a non-scatter-gather supporting card, the three tests simply become:
-
-		/* This is a hard error log it. */
-		if (TX_BUFFS_AVAIL(dp) <= 0)
-
-   and:
-
-		if (TX_BUFFS_AVAIL(dp) == 0)
-
-   and:
-
-	if (netif_queue_stopped(dp->dev) &&
-            TX_BUFFS_AVAIL(dp) > 0)
-		netif_wake_queue(dp->dev);
-
-2) An ndo_start_xmit method must not modify the shared parts of a
-   cloned SKB.
-
-3) Do not forget that once you return NETDEV_TX_OK from your
-   ndo_start_xmit method, it is your driver's responsibility to free
-   up the SKB and in some finite amount of time.
-
-   For example, this means that it is not allowed for your TX
-   mitigation scheme to let TX packets "hang out" in the TX
-   ring unreclaimed forever if no new TX packets are sent.
-   This error can deadlock sockets waiting for send buffer room
-   to be freed up.
-
-   If you return NETDEV_TX_BUSY from the ndo_start_xmit method, you
-   must not keep any reference to that SKB and you must not attempt
-   to free it up.
-
-Probing guidelines:
-
-1) Any hardware layer address you obtain for your device should
-   be verified.  For example, for ethernet check it with
-   linux/etherdevice.h:is_valid_ether_addr()
-
-Close/stop guidelines:
-
-1) After the ndo_stop routine has been called, the hardware must
-   not receive or transmit any data.  All in flight packets must
-   be aborted. If necessary, poll or wait for completion of 
-   any reset commands.
-
-2) The ndo_stop routine will be called by unregister_netdevice
-   if device is still UP.
diff --git a/Documentation/networking/eql.rst b/Documentation/networking/eql.rst
new file mode 100644
index 000000000000..a628c4c81166
--- /dev/null
+++ b/Documentation/networking/eql.rst
@@ -0,0 +1,373 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================================
+EQL Driver: Serial IP Load Balancing HOWTO
+==========================================
+
+  Simon "Guru Aleph-Null" Janes, simon@ncm.com
+
+  v1.1, February 27, 1995
+
+  This is the manual for the EQL device driver. EQL is a software device
+  that lets you load-balance IP serial links (SLIP or uncompressed PPP)
+  to increase your bandwidth. It will not reduce your latency (i.e. ping
+  times) except in the case where you already have lots of traffic on
+  your link, in which it will help them out. This driver has been tested
+  with the 1.1.75 kernel, and is known to have patched cleanly with
+  1.1.86.  Some testing with 1.1.92 has been done with the v1.1 patch
+  which was only created to patch cleanly in the very latest kernel
+  source trees. (Yes, it worked fine.)
+
+1. Introduction
+===============
+
+  Which is worse? A huge fee for a 56K leased line or two phone lines?
+  It's probably the former.  If you find yourself craving more bandwidth,
+  and have a ISP that is flexible, it is now possible to bind modems
+  together to work as one point-to-point link to increase your
+  bandwidth.  All without having to have a special black box on either
+  side.
+
+
+  The eql driver has only been tested with the Livingston PortMaster-2e
+  terminal server. I do not know if other terminal servers support load-
+  balancing, but I do know that the PortMaster does it, and does it
+  almost as well as the eql driver seems to do it (-- Unfortunately, in
+  my testing so far, the Livingston PortMaster 2e's load-balancing is a
+  good 1 to 2 KB/s slower than the test machine working with a 28.8 Kbps
+  and 14.4 Kbps connection.  However, I am not sure that it really is
+  the PortMaster, or if it's Linux's TCP drivers. I'm told that Linux's
+  TCP implementation is pretty fast though.--)
+
+
+  I suggest to ISPs out there that it would probably be fair to charge
+  a load-balancing client 75% of the cost of the second line and 50% of
+  the cost of the third line etc...
+
+
+  Hey, we can all dream you know...
+
+
+2. Kernel Configuration
+=======================
+
+  Here I describe the general steps of getting a kernel up and working
+  with the eql driver.	From patching, building, to installing.
+
+
+2.1. Patching The Kernel
+------------------------
+
+  If you do not have or cannot get a copy of the kernel with the eql
+  driver folded into it, get your copy of the driver from
+  ftp://slaughter.ncm.com/pub/Linux/LOAD_BALANCING/eql-1.1.tar.gz.
+  Unpack this archive someplace obvious like /usr/local/src/.  It will
+  create the following files::
+
+       -rw-r--r-- guru/ncm	198 Jan 19 18:53 1995 eql-1.1/NO-WARRANTY
+       -rw-r--r-- guru/ncm	30620 Feb 27 21:40 1995 eql-1.1/eql-1.1.patch
+       -rwxr-xr-x guru/ncm	16111 Jan 12 22:29 1995 eql-1.1/eql_enslave
+       -rw-r--r-- guru/ncm	2195 Jan 10 21:48 1995 eql-1.1/eql_enslave.c
+
+  Unpack a recent kernel (something after 1.1.92) someplace convenient
+  like say /usr/src/linux-1.1.92.eql. Use symbolic links to point
+  /usr/src/linux to this development directory.
+
+
+  Apply the patch by running the commands::
+
+       cd /usr/src
+       patch </usr/local/src/eql-1.1/eql-1.1.patch
+
+
+2.2. Building The Kernel
+------------------------
+
+  After patching the kernel, run make config and configure the kernel
+  for your hardware.
+
+
+  After configuration, make and install according to your habit.
+
+
+3. Network Configuration
+========================
+
+  So far, I have only used the eql device with the DSLIP SLIP connection
+  manager by Matt Dillon (-- "The man who sold his soul to code so much
+  so quickly."--) .  How you configure it for other "connection"
+  managers is up to you.  Most other connection managers that I've seen
+  don't do a very good job when it comes to handling more than one
+  connection.
+
+
+3.1. /etc/rc.d/rc.inet1
+-----------------------
+
+  In rc.inet1, ifconfig the eql device to the IP address you usually use
+  for your machine, and the MTU you prefer for your SLIP lines.	One
+  could argue that MTU should be roughly half the usual size for two
+  modems, one-third for three, one-fourth for four, etc...  But going
+  too far below 296 is probably overkill. Here is an example ifconfig
+  command that sets up the eql device::
+
+       ifconfig eql 198.67.33.239 mtu 1006
+
+  Once the eql device is up and running, add a static default route to
+  it in the routing table using the cool new route syntax that makes
+  life so much easier::
+
+       route add default eql
+
+
+3.2. Enslaving Devices By Hand
+------------------------------
+
+  Enslaving devices by hand requires two utility programs: eql_enslave
+  and eql_emancipate (-- eql_emancipate hasn't been written because when
+  an enslaved device "dies", it is automatically taken out of the queue.
+  I haven't found a good reason to write it yet... other than for
+  completeness, but that isn't a good motivator is it?--)
+
+
+  The syntax for enslaving a device is "eql_enslave <master-name>
+  <slave-name> <estimated-bps>".  Here are some example enslavings::
+
+       eql_enslave eql sl0 28800
+       eql_enslave eql ppp0 14400
+       eql_enslave eql sl1 57600
+
+  When you want to free a device from its life of slavery, you can
+  either down the device with ifconfig (eql will automatically bury the
+  dead slave and remove it from its queue) or use eql_emancipate to free
+  it. (-- Or just ifconfig it down, and the eql driver will take it out
+  for you.--)::
+
+       eql_emancipate eql sl0
+       eql_emancipate eql ppp0
+       eql_emancipate eql sl1
+
+
+3.3. DSLIP Configuration for the eql Device
+-------------------------------------------
+
+  The general idea is to bring up and keep up as many SLIP connections
+  as you need, automatically.
+
+
+3.3.1.  /etc/slip/runslip.conf
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  Here is an example runslip.conf::
+
+	  name		sl-line-1
+	  enabled
+	  baud		38400
+	  mtu		576
+	  ducmd		-e /etc/slip/dialout/cua2-288.xp -t 9
+	  command	 eql_enslave eql $interface 28800
+	  address	 198.67.33.239
+	  line		/dev/cua2
+
+	  name		sl-line-2
+	  enabled
+	  baud		38400
+	  mtu		576
+	  ducmd		-e /etc/slip/dialout/cua3-288.xp -t 9
+	  command	 eql_enslave eql $interface 28800
+	  address	 198.67.33.239
+	  line		/dev/cua3
+
+
+3.4. Using PPP and the eql Device
+---------------------------------
+
+  I have not yet done any load-balancing testing for PPP devices, mainly
+  because I don't have a PPP-connection manager like SLIP has with
+  DSLIP. I did find a good tip from LinuxNET:Billy for PPP performance:
+  make sure you have asyncmap set to something so that control
+  characters are not escaped.
+
+
+  I tried to fix up a PPP script/system for redialing lost PPP
+  connections for use with the eql driver the weekend of Feb 25-26 '95
+  (Hereafter known as the 8-hour PPP Hate Festival).  Perhaps later this
+  year.
+
+
+4. About the Slave Scheduler Algorithm
+======================================
+
+  The slave scheduler probably could be replaced with a dozen other
+  things and push traffic much faster.	The formula in the current set
+  up of the driver was tuned to handle slaves with wildly different
+  bits-per-second "priorities".
+
+
+  All testing I have done was with two 28.8 V.FC modems, one connecting
+  at 28800 bps or slower, and the other connecting at 14400 bps all the
+  time.
+
+
+  One version of the scheduler was able to push 5.3 K/s through the
+  28800 and 14400 connections, but when the priorities on the links were
+  very wide apart (57600 vs. 14400) the "faster" modem received all
+  traffic and the "slower" modem starved.
+
+
+5. Testers' Reports
+===================
+
+  Some people have experimented with the eql device with newer
+  kernels (than 1.1.75).  I have since updated the driver to patch
+  cleanly in newer kernels because of the removal of the old "slave-
+  balancing" driver config option.
+
+
+  -  icee from LinuxNET patched 1.1.86 without any rejects and was able
+     to boot the kernel and enslave a couple of ISDN PPP links.
+
+5.1. Randolph Bentson's Test Report
+-----------------------------------
+
+  ::
+
+    From bentson@grieg.seaslug.org Wed Feb  8 19:08:09 1995
+    Date: Tue, 7 Feb 95 22:57 PST
+    From: Randolph Bentson <bentson@grieg.seaslug.org>
+    To: guru@ncm.com
+    Subject: EQL driver tests
+
+
+    I have been checking out your eql driver.  (Nice work, that!)
+    Although you may already done this performance testing, here
+    are some data I've discovered.
+
+    Randolph Bentson
+    bentson@grieg.seaslug.org
+
+------------------------------------------------------------------
+
+
+  A pseudo-device driver, EQL, written by Simon Janes, can be used
+  to bundle multiple SLIP connections into what appears to be a
+  single connection.  This allows one to improve dial-up network
+  connectivity gradually, without having to buy expensive DSU/CSU
+  hardware and services.
+
+  I have done some testing of this software, with two goals in
+  mind: first, to ensure it actually works as described and
+  second, as a method of exercising my device driver.
+
+  The following performance measurements were derived from a set
+  of SLIP connections run between two Linux systems (1.1.84) using
+  a 486DX2/66 with a Cyclom-8Ys and a 486SLC/40 with a Cyclom-16Y.
+  (Ports 0,1,2,3 were used.  A later configuration will distribute
+  port selection across the different Cirrus chips on the boards.)
+  Once a link was established, I timed a binary ftp transfer of
+  289284 bytes of data.	If there were no overhead (packet headers,
+  inter-character and inter-packet delays, etc.) the transfers
+  would take the following times::
+
+      bits/sec	seconds
+      345600	8.3
+      234600	12.3
+      172800	16.7
+      153600	18.8
+      76800	37.6
+      57600	50.2
+      38400	75.3
+      28800	100.4
+      19200	150.6
+      9600	301.3
+
+  A single line running at the lower speeds and with large packets
+  comes to within 2% of this.  Performance is limited for the higher
+  speeds (as predicted by the Cirrus databook) to an aggregate of
+  about 160 kbits/sec.	The next round of testing will distribute
+  the load across two or more Cirrus chips.
+
+  The good news is that one gets nearly the full advantage of the
+  second, third, and fourth line's bandwidth.  (The bad news is
+  that the connection establishment seemed fragile for the higher
+  speeds.  Once established, the connection seemed robust enough.)
+
+  ======  ========	===  ========   ======= ======= ===
+  #lines  speed		mtu  seconds	theory  actual  %of
+	  kbit/sec	     duration	speed	speed	max
+  ======  ========	===  ========   ======= ======= ===
+  3	  115200	900	_	345600
+  3	  115200	400	18.1	345600  159825  46
+  2	  115200	900	_	230400
+  2	  115200	600	18.1	230400  159825  69
+  2	  115200	400	19.3	230400  149888  65
+  4	  57600		900	_	234600
+  4	  57600		600	_	234600
+  4	  57600		400	_	234600
+  3	  57600		600	20.9	172800  138413  80
+  3	  57600		900	21.2	172800  136455  78
+  3	  115200	600	21.7	345600  133311  38
+  3	  57600		400	22.5	172800  128571  74
+  4	  38400		900	25.2	153600  114795  74
+  4	  38400		600	26.4	153600  109577  71
+  4	  38400		400	27.3	153600  105965  68
+  2	  57600		900	29.1	115200  99410.3 86
+  1	  115200	900	30.7	115200  94229.3 81
+  2	  57600		600	30.2	115200  95789.4 83
+  3	  38400		900	30.3	115200  95473.3 82
+  3	  38400		600	31.2	115200  92719.2 80
+  1	  115200	600	31.3	115200  92423	80
+  2	  57600		400	32.3	115200  89561.6 77
+  1	  115200	400	32.8	115200  88196.3 76
+  3	  38400		400	33.5	115200  86353.4 74
+  2	  38400		900	43.7	76800	66197.7 86
+  2	  38400		600	44	76800	65746.4 85
+  2	  38400		400	47.2	76800	61289	79
+  4	  19200		900	50.8	76800	56945.7 74
+  4	  19200		400	53.2	76800	54376.7 70
+  4	  19200		600	53.7	76800	53870.4 70
+  1	  57600		900	54.6	57600	52982.4 91
+  1	  57600		600	56.2	57600	51474	89
+  3	  19200		900	60.5	57600	47815.5 83
+  1	  57600		400	60.2	57600	48053.8 83
+  3	  19200		600	62	57600	46658.7 81
+  3	  19200		400	64.7	57600	44711.6 77
+  1	  38400		900	79.4	38400	36433.8 94
+  1	  38400		600	82.4	38400	35107.3 91
+  2	  19200		900	84.4	38400	34275.4 89
+  1	  38400		400	86.8	38400	33327.6 86
+  2	  19200		600	87.6	38400	33023.3 85
+  2	  19200		400	91.2	38400	31719.7 82
+  4	  9600		900	94.7	38400	30547.4 79
+  4	  9600		400	106	38400	27290.9 71
+  4	  9600		600	110	38400	26298.5 68
+  3	  9600		900	118	28800	24515.6 85
+  3	  9600		600	120	28800	24107	83
+  3	  9600		400	131	28800	22082.7 76
+  1	  19200		900	155	19200	18663.5 97
+  1	  19200		600	161	19200	17968	93
+  1	  19200		400	170	19200	17016.7 88
+  2	  9600		600	176	19200	16436.6 85
+  2	  9600		900	180	19200	16071.3 83
+  2	  9600		400	181	19200	15982.5 83
+  1	  9600		900	305	9600	9484.72 98
+  1	  9600		600	314	9600	9212.87 95
+  1	  9600		400	332	9600	8713.37 90
+  ======  ========	===  ========   ======= ======= ===
+
+5.2. Anthony Healy's Report
+---------------------------
+
+  ::
+
+    Date: Mon, 13 Feb 1995 16:17:29 +1100 (EST)
+    From: Antony Healey <ahealey@st.nepean.uws.edu.au>
+    To: Simon Janes <guru@ncm.com>
+    Subject: Re: Load Balancing
+
+    Hi Simon,
+	  I've installed your patch and it works great. I have trialed
+	  it over twin SL/IP lines, just over null modems, but I was
+	  able to data at over 48Kb/s [ISDN link -Simon]. I managed a
+	  transfer of up to 7.5 Kbyte/s on one go, but averaged around
+	  6.4 Kbyte/s, which I think is pretty cool.  :)
diff --git a/Documentation/networking/eql.txt b/Documentation/networking/eql.txt
deleted file mode 100644
index 0f1550150f05..000000000000
--- a/Documentation/networking/eql.txt
+++ /dev/null
@@ -1,528 +0,0 @@
-  EQL Driver: Serial IP Load Balancing HOWTO
-  Simon "Guru Aleph-Null" Janes, simon@ncm.com
-  v1.1, February 27, 1995
-
-  This is the manual for the EQL device driver. EQL is a software device
-  that lets you load-balance IP serial links (SLIP or uncompressed PPP)
-  to increase your bandwidth. It will not reduce your latency (i.e. ping
-  times) except in the case where you already have lots of traffic on
-  your link, in which it will help them out. This driver has been tested
-  with the 1.1.75 kernel, and is known to have patched cleanly with
-  1.1.86.  Some testing with 1.1.92 has been done with the v1.1 patch
-  which was only created to patch cleanly in the very latest kernel
-  source trees. (Yes, it worked fine.)
-
-  1.  Introduction
-
-  Which is worse? A huge fee for a 56K leased line or two phone lines?
-  It's probably the former.  If you find yourself craving more bandwidth,
-  and have a ISP that is flexible, it is now possible to bind modems
-  together to work as one point-to-point link to increase your
-  bandwidth.  All without having to have a special black box on either
-  side.
-
-
-  The eql driver has only been tested with the Livingston PortMaster-2e
-  terminal server. I do not know if other terminal servers support load-
-  balancing, but I do know that the PortMaster does it, and does it
-  almost as well as the eql driver seems to do it (-- Unfortunately, in
-  my testing so far, the Livingston PortMaster 2e's load-balancing is a
-  good 1 to 2 KB/s slower than the test machine working with a 28.8 Kbps
-  and 14.4 Kbps connection.  However, I am not sure that it really is
-  the PortMaster, or if it's Linux's TCP drivers. I'm told that Linux's
-  TCP implementation is pretty fast though.--)
-
-
-  I suggest to ISPs out there that it would probably be fair to charge
-  a load-balancing client 75% of the cost of the second line and 50% of
-  the cost of the third line etc...
-
-
-  Hey, we can all dream you know...
-
-
-  2.  Kernel Configuration
-
-  Here I describe the general steps of getting a kernel up and working
-  with the eql driver.	From patching, building, to installing.
-
-
-  2.1.	Patching The Kernel
-
-  If you do not have or cannot get a copy of the kernel with the eql
-  driver folded into it, get your copy of the driver from
-  ftp://slaughter.ncm.com/pub/Linux/LOAD_BALANCING/eql-1.1.tar.gz.
-  Unpack this archive someplace obvious like /usr/local/src/.  It will
-  create the following files:
-
-
-
-       ______________________________________________________________________
-       -rw-r--r-- guru/ncm	198 Jan 19 18:53 1995 eql-1.1/NO-WARRANTY
-       -rw-r--r-- guru/ncm	30620 Feb 27 21:40 1995 eql-1.1/eql-1.1.patch
-       -rwxr-xr-x guru/ncm	16111 Jan 12 22:29 1995 eql-1.1/eql_enslave
-       -rw-r--r-- guru/ncm	2195 Jan 10 21:48 1995 eql-1.1/eql_enslave.c
-       ______________________________________________________________________
-
-  Unpack a recent kernel (something after 1.1.92) someplace convenient
-  like say /usr/src/linux-1.1.92.eql. Use symbolic links to point
-  /usr/src/linux to this development directory.
-
-
-  Apply the patch by running the commands:
-
-
-       ______________________________________________________________________
-       cd /usr/src
-       patch </usr/local/src/eql-1.1/eql-1.1.patch
-       ______________________________________________________________________
-
-
-
-
-
-  2.2.	Building The Kernel
-
-  After patching the kernel, run make config and configure the kernel
-  for your hardware.
-
-
-  After configuration, make and install according to your habit.
-
-
-  3.  Network Configuration
-
-  So far, I have only used the eql device with the DSLIP SLIP connection
-  manager by Matt Dillon (-- "The man who sold his soul to code so much
-  so quickly."--) .  How you configure it for other "connection"
-  managers is up to you.  Most other connection managers that I've seen
-  don't do a very good job when it comes to handling more than one
-  connection.
-
-
-  3.1.	/etc/rc.d/rc.inet1
-
-  In rc.inet1, ifconfig the eql device to the IP address you usually use
-  for your machine, and the MTU you prefer for your SLIP lines.	One
-  could argue that MTU should be roughly half the usual size for two
-  modems, one-third for three, one-fourth for four, etc...  But going
-  too far below 296 is probably overkill. Here is an example ifconfig
-  command that sets up the eql device:
-
-
-
-       ______________________________________________________________________
-       ifconfig eql 198.67.33.239 mtu 1006
-       ______________________________________________________________________
-
-
-
-
-
-  Once the eql device is up and running, add a static default route to
-  it in the routing table using the cool new route syntax that makes
-  life so much easier:
-
-
-
-       ______________________________________________________________________
-       route add default eql
-       ______________________________________________________________________
-
-
-  3.2.	Enslaving Devices By Hand
-
-  Enslaving devices by hand requires two utility programs: eql_enslave
-  and eql_emancipate (-- eql_emancipate hasn't been written because when
-  an enslaved device "dies", it is automatically taken out of the queue.
-  I haven't found a good reason to write it yet... other than for
-  completeness, but that isn't a good motivator is it?--)
-
-
-  The syntax for enslaving a device is "eql_enslave <master-name>
-  <slave-name> <estimated-bps>".  Here are some example enslavings:
-
-
-
-       ______________________________________________________________________
-       eql_enslave eql sl0 28800
-       eql_enslave eql ppp0 14400
-       eql_enslave eql sl1 57600
-       ______________________________________________________________________
-
-
-
-
-
-  When you want to free a device from its life of slavery, you can
-  either down the device with ifconfig (eql will automatically bury the
-  dead slave and remove it from its queue) or use eql_emancipate to free
-  it. (-- Or just ifconfig it down, and the eql driver will take it out
-  for you.--)
-
-
-
-       ______________________________________________________________________
-       eql_emancipate eql sl0
-       eql_emancipate eql ppp0
-       eql_emancipate eql sl1
-       ______________________________________________________________________
-
-
-
-
-
-  3.3.	DSLIP Configuration for the eql Device
-
-  The general idea is to bring up and keep up as many SLIP connections
-  as you need, automatically.
-
-
-  3.3.1.  /etc/slip/runslip.conf
-
-  Here is an example runslip.conf:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-  ______________________________________________________________________
-  name		sl-line-1
-  enabled
-  baud		38400
-  mtu		576
-  ducmd		-e /etc/slip/dialout/cua2-288.xp -t 9
-  command	 eql_enslave eql $interface 28800
-  address	 198.67.33.239
-  line		/dev/cua2
-
-  name		sl-line-2
-  enabled
-  baud		38400
-  mtu		576
-  ducmd		-e /etc/slip/dialout/cua3-288.xp -t 9
-  command	 eql_enslave eql $interface 28800
-  address	 198.67.33.239
-  line		/dev/cua3
-  ______________________________________________________________________
-
-
-
-
-
-  3.4.	Using PPP and the eql Device
-
-  I have not yet done any load-balancing testing for PPP devices, mainly
-  because I don't have a PPP-connection manager like SLIP has with
-  DSLIP. I did find a good tip from LinuxNET:Billy for PPP performance:
-  make sure you have asyncmap set to something so that control
-  characters are not escaped.
-
-
-  I tried to fix up a PPP script/system for redialing lost PPP
-  connections for use with the eql driver the weekend of Feb 25-26 '95
-  (Hereafter known as the 8-hour PPP Hate Festival).  Perhaps later this
-  year.
-
-
-  4.  About the Slave Scheduler Algorithm
-
-  The slave scheduler probably could be replaced with a dozen other
-  things and push traffic much faster.	The formula in the current set
-  up of the driver was tuned to handle slaves with wildly different
-  bits-per-second "priorities".
-
-
-  All testing I have done was with two 28.8 V.FC modems, one connecting
-  at 28800 bps or slower, and the other connecting at 14400 bps all the
-  time.
-
-
-  One version of the scheduler was able to push 5.3 K/s through the
-  28800 and 14400 connections, but when the priorities on the links were
-  very wide apart (57600 vs. 14400) the "faster" modem received all
-  traffic and the "slower" modem starved.
-
-
-  5.  Testers' Reports
-
-  Some people have experimented with the eql device with newer
-  kernels (than 1.1.75).  I have since updated the driver to patch
-  cleanly in newer kernels because of the removal of the old "slave-
-  balancing" driver config option.
-
-
-  o  icee from LinuxNET patched 1.1.86 without any rejects and was able
-     to boot the kernel and enslave a couple of ISDN PPP links.
-
-  5.1.	Randolph Bentson's Test Report
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-  From bentson@grieg.seaslug.org Wed Feb  8 19:08:09 1995
-  Date: Tue, 7 Feb 95 22:57 PST
-  From: Randolph Bentson <bentson@grieg.seaslug.org>
-  To: guru@ncm.com
-  Subject: EQL driver tests
-
-
-  I have been checking out your eql driver.  (Nice work, that!)
-  Although you may already done this performance testing, here
-  are some data I've discovered.
-
-  Randolph Bentson
-  bentson@grieg.seaslug.org
-
-  ---------------------------------------------------------
-
-
-  A pseudo-device driver, EQL, written by Simon Janes, can be used
-  to bundle multiple SLIP connections into what appears to be a
-  single connection.  This allows one to improve dial-up network
-  connectivity gradually, without having to buy expensive DSU/CSU
-  hardware and services.
-
-  I have done some testing of this software, with two goals in
-  mind: first, to ensure it actually works as described and
-  second, as a method of exercising my device driver.
-
-  The following performance measurements were derived from a set
-  of SLIP connections run between two Linux systems (1.1.84) using
-  a 486DX2/66 with a Cyclom-8Ys and a 486SLC/40 with a Cyclom-16Y.
-  (Ports 0,1,2,3 were used.  A later configuration will distribute
-  port selection across the different Cirrus chips on the boards.)
-  Once a link was established, I timed a binary ftp transfer of
-  289284 bytes of data.	If there were no overhead (packet headers,
-  inter-character and inter-packet delays, etc.) the transfers
-  would take the following times:
-
-      bits/sec	seconds
-      345600	8.3
-      234600	12.3
-      172800	16.7
-      153600	18.8
-      76800	37.6
-      57600	50.2
-      38400	75.3
-      28800	100.4
-      19200	150.6
-      9600	301.3
-
-  A single line running at the lower speeds and with large packets
-  comes to within 2% of this.  Performance is limited for the higher
-  speeds (as predicted by the Cirrus databook) to an aggregate of
-  about 160 kbits/sec.	The next round of testing will distribute
-  the load across two or more Cirrus chips.
-
-  The good news is that one gets nearly the full advantage of the
-  second, third, and fourth line's bandwidth.  (The bad news is
-  that the connection establishment seemed fragile for the higher
-  speeds.  Once established, the connection seemed robust enough.)
-
-  #lines  speed	mtu  seconds	theory  actual  %of
-	 kbit/sec      duration	speed	speed	max
-  3	115200  900	_	345600
-  3	115200  400	18.1	345600  159825  46
-  2	115200  900	_	230400
-  2	115200  600	18.1	230400  159825  69
-  2	115200  400	19.3	230400  149888  65
-  4	57600	900	_	234600
-  4	57600	600	_	234600
-  4	57600	400	_	234600
-  3	57600	600	20.9	172800  138413  80
-  3	57600	900	21.2	172800  136455  78
-  3	115200  600	21.7	345600  133311  38
-  3	57600	400	22.5	172800  128571  74
-  4	38400	900	25.2	153600  114795  74
-  4	38400	600	26.4	153600  109577  71
-  4	38400	400	27.3	153600  105965  68
-  2	57600	900	29.1	115200  99410.3 86
-  1	115200  900	30.7	115200  94229.3 81
-  2	57600	600	30.2	115200  95789.4 83
-  3	38400	900	30.3	115200  95473.3 82
-  3	38400	600	31.2	115200  92719.2 80
-  1	115200  600	31.3	115200  92423	80
-  2	57600	400	32.3	115200  89561.6 77
-  1	115200  400	32.8	115200  88196.3 76
-  3	38400	400	33.5	115200  86353.4 74
-  2	38400	900	43.7	76800	66197.7 86
-  2	38400	600	44	76800	65746.4 85
-  2	38400	400	47.2	76800	61289	79
-  4	19200	900	50.8	76800	56945.7 74
-  4	19200	400	53.2	76800	54376.7 70
-  4	19200	600	53.7	76800	53870.4 70
-  1	57600	900	54.6	57600	52982.4 91
-  1	57600	600	56.2	57600	51474	89
-  3	19200	900	60.5	57600	47815.5 83
-  1	57600	400	60.2	57600	48053.8 83
-  3	19200	600	62	57600	46658.7 81
-  3	19200	400	64.7	57600	44711.6 77
-  1	38400	900	79.4	38400	36433.8 94
-  1	38400	600	82.4	38400	35107.3 91
-  2	19200	900	84.4	38400	34275.4 89
-  1	38400	400	86.8	38400	33327.6 86
-  2	19200	600	87.6	38400	33023.3 85
-  2	19200	400	91.2	38400	31719.7 82
-  4	9600	900	94.7	38400	30547.4 79
-  4	9600	400	106	38400	27290.9 71
-  4	9600	600	110	38400	26298.5 68
-  3	9600	900	118	28800	24515.6 85
-  3	9600	600	120	28800	24107	83
-  3	9600	400	131	28800	22082.7 76
-  1	19200	900	155	19200	18663.5 97
-  1	19200	600	161	19200	17968	93
-  1	19200	400	170	19200	17016.7 88
-  2	9600	600	176	19200	16436.6 85
-  2	9600	900	180	19200	16071.3 83
-  2	9600	400	181	19200	15982.5 83
-  1	9600	900	305	9600	9484.72 98
-  1	9600	600	314	9600	9212.87 95
-  1	9600	400	332	9600	8713.37 90
-
-
-
-
-
-  5.2.	Anthony Healy's Report
-
-
-
-
-
-
-
-  Date: Mon, 13 Feb 1995 16:17:29 +1100 (EST)
-  From: Antony Healey <ahealey@st.nepean.uws.edu.au>
-  To: Simon Janes <guru@ncm.com>
-  Subject: Re: Load Balancing
-
-  Hi Simon,
-	  I've installed your patch and it works great. I have trialed
-	  it over twin SL/IP lines, just over null modems, but I was
-	  able to data at over 48Kb/s [ISDN link -Simon]. I managed a
-	  transfer of up to 7.5 Kbyte/s on one go, but averaged around
-	  6.4 Kbyte/s, which I think is pretty cool.  :)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/Documentation/networking/fib_trie.rst b/Documentation/networking/fib_trie.rst
new file mode 100644
index 000000000000..f1435b7fcdb7
--- /dev/null
+++ b/Documentation/networking/fib_trie.rst
@@ -0,0 +1,149 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+LC-trie implementation notes
+============================
+
+Node types
+----------
+leaf
+	An end node with data. This has a copy of the relevant key, along
+	with 'hlist' with routing table entries sorted by prefix length.
+	See struct leaf and struct leaf_info.
+
+trie node or tnode
+	An internal node, holding an array of child (leaf or tnode) pointers,
+	indexed	through a subset of the key. See Level Compression.
+
+A few concepts explained
+------------------------
+Bits (tnode)
+	The number of bits in the key segment used for indexing into the
+	child array - the "child index". See Level Compression.
+
+Pos (tnode)
+	The position (in the key) of the key segment used for indexing into
+	the child array. See Path Compression.
+
+Path Compression / skipped bits
+	Any given tnode is linked to from the child array of its parent, using
+	a segment of the key specified by the parent's "pos" and "bits"
+	In certain cases, this tnode's own "pos" will not be immediately
+	adjacent to the parent (pos+bits), but there will be some bits
+	in the key skipped over because they represent a single path with no
+	deviations. These "skipped bits" constitute Path Compression.
+	Note that the search algorithm will simply skip over these bits when
+	searching, making it necessary to save the keys in the leaves to
+	verify that they actually do match the key we are searching for.
+
+Level Compression / child arrays
+	the trie is kept level balanced moving, under certain conditions, the
+	children of a full child (see "full_children") up one level, so that
+	instead of a pure binary tree, each internal node ("tnode") may
+	contain an arbitrarily large array of links to several children.
+	Conversely, a tnode with a mostly empty	child array (see empty_children)
+	may be "halved", having some of its children moved downwards one level,
+	in order to avoid ever-increasing child arrays.
+
+empty_children
+	the number of positions in the child array of a given tnode that are
+	NULL.
+
+full_children
+	the number of children of a given tnode that aren't path compressed.
+	(in other words, they aren't NULL or leaves and their "pos" is equal
+	to this	tnode's "pos"+"bits").
+
+	(The word "full" here is used more in the sense of "complete" than
+	as the opposite of "empty", which might be a tad confusing.)
+
+Comments
+---------
+
+We have tried to keep the structure of the code as close to fib_hash as
+possible to allow verification and help up reviewing.
+
+fib_find_node()
+	A good start for understanding this code. This function implements a
+	straightforward trie lookup.
+
+fib_insert_node()
+	Inserts a new leaf node in the trie. This is bit more complicated than
+	fib_find_node(). Inserting a new node means we might have to run the
+	level compression algorithm on part of the trie.
+
+trie_leaf_remove()
+	Looks up a key, deletes it and runs the level compression algorithm.
+
+trie_rebalance()
+	The key function for the dynamic trie after any change in the trie
+	it is run to optimize and reorganize. It will walk the trie upwards
+	towards the root from a given tnode, doing a resize() at each step
+	to implement level compression.
+
+resize()
+	Analyzes a tnode and optimizes the child array size by either inflating
+	or shrinking it repeatedly until it fulfills the criteria for optimal
+	level compression. This part follows the original paper pretty closely
+	and there may be some room for experimentation here.
+
+inflate()
+	Doubles the size of the child array within a tnode. Used by resize().
+
+halve()
+	Halves the size of the child array within a tnode - the inverse of
+	inflate(). Used by resize();
+
+fn_trie_insert(), fn_trie_delete(), fn_trie_select_default()
+	The route manipulation functions. Should conform pretty closely to the
+	corresponding functions in fib_hash.
+
+fn_trie_flush()
+	This walks the full trie (using nextleaf()) and searches for empty
+	leaves which have to be removed.
+
+fn_trie_dump()
+	Dumps the routing table ordered by prefix length. This is somewhat
+	slower than the corresponding fib_hash function, as we have to walk the
+	entire trie for each prefix length. In comparison, fib_hash is organized
+	as one "zone"/hash per prefix length.
+
+Locking
+-------
+
+fib_lock is used for an RW-lock in the same way that this is done in fib_hash.
+However, the functions are somewhat separated for other possible locking
+scenarios. It might conceivably be possible to run trie_rebalance via RCU
+to avoid read_lock in the fn_trie_lookup() function.
+
+Main lookup mechanism
+---------------------
+fn_trie_lookup() is the main lookup function.
+
+The lookup is in its simplest form just like fib_find_node(). We descend the
+trie, key segment by key segment, until we find a leaf. check_leaf() does
+the fib_semantic_match in the leaf's sorted prefix hlist.
+
+If we find a match, we are done.
+
+If we don't find a match, we enter prefix matching mode. The prefix length,
+starting out at the same as the key length, is reduced one step at a time,
+and we backtrack upwards through the trie trying to find a longest matching
+prefix. The goal is always to reach a leaf and get a positive result from the
+fib_semantic_match mechanism.
+
+Inside each tnode, the search for longest matching prefix consists of searching
+through the child array, chopping off (zeroing) the least significant "1" of
+the child index until we find a match or the child index consists of nothing but
+zeros.
+
+At this point we backtrack (t->stats.backtrack++) up the trie, continuing to
+chop off part of the key in order to find the longest matching prefix.
+
+At this point we will repeatedly descend subtries to look for a match, and there
+are some optimizations available that can provide us with "shortcuts" to avoid
+descending into dead ends. Look for "HL_OPTIMIZE" sections in the code.
+
+To alleviate any doubts about the correctness of the route selection process,
+a new netlink operation has been added. Look for NETLINK_FIB_LOOKUP, which
+gives userland access to fib_lookup().
diff --git a/Documentation/networking/fib_trie.txt b/Documentation/networking/fib_trie.txt
deleted file mode 100644
index fe719388518b..000000000000
--- a/Documentation/networking/fib_trie.txt
+++ /dev/null
@@ -1,145 +0,0 @@
-			LC-trie implementation notes.
-
-Node types
-----------
-leaf 
-	An end node with data. This has a copy of the relevant key, along
-	with 'hlist' with routing table entries sorted by prefix length.
-	See struct leaf and struct leaf_info.
-
-trie node or tnode
-	An internal node, holding an array of child (leaf or tnode) pointers,
-	indexed	through a subset of the key. See Level Compression.
-
-A few concepts explained
-------------------------
-Bits (tnode) 
-	The number of bits in the key segment used for indexing into the
-	child array - the "child index". See Level Compression.
-
-Pos (tnode)
-	The position (in the key) of the key segment used for indexing into
-	the child array. See Path Compression.
-
-Path Compression / skipped bits
-	Any given tnode is linked to from the child array of its parent, using
-	a segment of the key specified by the parent's "pos" and "bits" 
-	In certain cases, this tnode's own "pos" will not be immediately
-	adjacent to the parent (pos+bits), but there will be some bits
-	in the key skipped over because they represent a single path with no
-	deviations. These "skipped bits" constitute Path Compression.
-	Note that the search algorithm will simply skip over these bits when
-	searching, making it necessary to save the keys in the leaves to
-	verify that they actually do match the key we are searching for.
-
-Level Compression / child arrays
-	the trie is kept level balanced moving, under certain conditions, the
-	children of a full child (see "full_children") up one level, so that
-	instead of a pure binary tree, each internal node ("tnode") may
-	contain an arbitrarily large array of links to several children.
-	Conversely, a tnode with a mostly empty	child array (see empty_children)
-	may be "halved", having some of its children moved downwards one level,
-	in order to avoid ever-increasing child arrays.
-
-empty_children
-	the number of positions in the child array of a given tnode that are
-	NULL.
-
-full_children
-	the number of children of a given tnode that aren't path compressed.
-	(in other words, they aren't NULL or leaves and their "pos" is equal
-	to this	tnode's "pos"+"bits").
-
-	(The word "full" here is used more in the sense of "complete" than
-	as the opposite of "empty", which might be a tad confusing.)
-
-Comments
----------
-
-We have tried to keep the structure of the code as close to fib_hash as 
-possible to allow verification and help up reviewing. 
-
-fib_find_node()
-	A good start for understanding this code. This function implements a
-	straightforward trie lookup.
-
-fib_insert_node()
-	Inserts a new leaf node in the trie. This is bit more complicated than
-	fib_find_node(). Inserting a new node means we might have to run the
-	level compression algorithm on part of the trie.
-
-trie_leaf_remove()
-	Looks up a key, deletes it and runs the level compression algorithm.
-
-trie_rebalance()
-	The key function for the dynamic trie after any change in the trie
-	it is run to optimize and reorganize. It will walk the trie upwards
-	towards the root from a given tnode, doing a resize() at each step
-	to implement level compression.
-
-resize()
-	Analyzes a tnode and optimizes the child array size by either inflating
-	or shrinking it repeatedly until it fulfills the criteria for optimal
-	level compression. This part follows the original paper pretty closely
-	and there may be some room for experimentation here.
-
-inflate()
-	Doubles the size of the child array within a tnode. Used by resize().
-
-halve()
-	Halves the size of the child array within a tnode - the inverse of
-	inflate(). Used by resize();
-
-fn_trie_insert(), fn_trie_delete(), fn_trie_select_default()
-	The route manipulation functions. Should conform pretty closely to the
-	corresponding functions in fib_hash.
-
-fn_trie_flush()
-	This walks the full trie (using nextleaf()) and searches for empty
-	leaves which have to be removed.
-
-fn_trie_dump()
-	Dumps the routing table ordered by prefix length. This is somewhat
-	slower than the corresponding fib_hash function, as we have to walk the
-	entire trie for each prefix length. In comparison, fib_hash is organized
-	as one "zone"/hash per prefix length.
-
-Locking
--------
-
-fib_lock is used for an RW-lock in the same way that this is done in fib_hash.
-However, the functions are somewhat separated for other possible locking
-scenarios. It might conceivably be possible to run trie_rebalance via RCU
-to avoid read_lock in the fn_trie_lookup() function.
-
-Main lookup mechanism
----------------------
-fn_trie_lookup() is the main lookup function.
-
-The lookup is in its simplest form just like fib_find_node(). We descend the
-trie, key segment by key segment, until we find a leaf. check_leaf() does
-the fib_semantic_match in the leaf's sorted prefix hlist.
-
-If we find a match, we are done.
-
-If we don't find a match, we enter prefix matching mode. The prefix length,
-starting out at the same as the key length, is reduced one step at a time,
-and we backtrack upwards through the trie trying to find a longest matching
-prefix. The goal is always to reach a leaf and get a positive result from the
-fib_semantic_match mechanism.
-
-Inside each tnode, the search for longest matching prefix consists of searching
-through the child array, chopping off (zeroing) the least significant "1" of
-the child index until we find a match or the child index consists of nothing but
-zeros.
-
-At this point we backtrack (t->stats.backtrack++) up the trie, continuing to
-chop off part of the key in order to find the longest matching prefix.
-
-At this point we will repeatedly descend subtries to look for a match, and there
-are some optimizations available that can provide us with "shortcuts" to avoid
-descending into dead ends. Look for "HL_OPTIMIZE" sections in the code.
-
-To alleviate any doubts about the correctness of the route selection process,
-a new netlink operation has been added. Look for NETLINK_FIB_LOOKUP, which
-gives userland access to fib_lookup().
diff --git a/Documentation/networking/filter.rst b/Documentation/networking/filter.rst
new file mode 100644
index 000000000000..a1d3e192b9fa
--- /dev/null
+++ b/Documentation/networking/filter.rst
@@ -0,0 +1,1651 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================================================
+Linux Socket Filtering aka Berkeley Packet Filter (BPF)
+=======================================================
+
+Introduction
+------------
+
+Linux Socket Filtering (LSF) is derived from the Berkeley Packet Filter.
+Though there are some distinct differences between the BSD and Linux
+Kernel filtering, but when we speak of BPF or LSF in Linux context, we
+mean the very same mechanism of filtering in the Linux kernel.
+
+BPF allows a user-space program to attach a filter onto any socket and
+allow or disallow certain types of data to come through the socket. LSF
+follows exactly the same filter code structure as BSD's BPF, so referring
+to the BSD bpf.4 manpage is very helpful in creating filters.
+
+On Linux, BPF is much simpler than on BSD. One does not have to worry
+about devices or anything like that. You simply create your filter code,
+send it to the kernel via the SO_ATTACH_FILTER option and if your filter
+code passes the kernel check on it, you then immediately begin filtering
+data on that socket.
+
+You can also detach filters from your socket via the SO_DETACH_FILTER
+option. This will probably not be used much since when you close a socket
+that has a filter on it the filter is automagically removed. The other
+less common case may be adding a different filter on the same socket where
+you had another filter that is still running: the kernel takes care of
+removing the old one and placing your new one in its place, assuming your
+filter has passed the checks, otherwise if it fails the old filter will
+remain on that socket.
+
+SO_LOCK_FILTER option allows to lock the filter attached to a socket. Once
+set, a filter cannot be removed or changed. This allows one process to
+setup a socket, attach a filter, lock it then drop privileges and be
+assured that the filter will be kept until the socket is closed.
+
+The biggest user of this construct might be libpcap. Issuing a high-level
+filter command like `tcpdump -i em1 port 22` passes through the libpcap
+internal compiler that generates a structure that can eventually be loaded
+via SO_ATTACH_FILTER to the kernel. `tcpdump -i em1 port 22 -ddd`
+displays what is being placed into this structure.
+
+Although we were only speaking about sockets here, BPF in Linux is used
+in many more places. There's xt_bpf for netfilter, cls_bpf in the kernel
+qdisc layer, SECCOMP-BPF (SECure COMPuting [1]_), and lots of other places
+such as team driver, PTP code, etc where BPF is being used.
+
+.. [1] Documentation/userspace-api/seccomp_filter.rst
+
+Original BPF paper:
+
+Steven McCanne and Van Jacobson. 1993. The BSD packet filter: a new
+architecture for user-level packet capture. In Proceedings of the
+USENIX Winter 1993 Conference Proceedings on USENIX Winter 1993
+Conference Proceedings (USENIX'93). USENIX Association, Berkeley,
+CA, USA, 2-2. [http://www.tcpdump.org/papers/bpf-usenix93.pdf]
+
+Structure
+---------
+
+User space applications include <linux/filter.h> which contains the
+following relevant structures::
+
+	struct sock_filter {	/* Filter block */
+		__u16	code;   /* Actual filter code */
+		__u8	jt;	/* Jump true */
+		__u8	jf;	/* Jump false */
+		__u32	k;      /* Generic multiuse field */
+	};
+
+Such a structure is assembled as an array of 4-tuples, that contains
+a code, jt, jf and k value. jt and jf are jump offsets and k a generic
+value to be used for a provided code::
+
+	struct sock_fprog {			/* Required for SO_ATTACH_FILTER. */
+		unsigned short		   len;	/* Number of filter blocks */
+		struct sock_filter __user *filter;
+	};
+
+For socket filtering, a pointer to this structure (as shown in
+follow-up example) is being passed to the kernel through setsockopt(2).
+
+Example
+-------
+
+::
+
+    #include <sys/socket.h>
+    #include <sys/types.h>
+    #include <arpa/inet.h>
+    #include <linux/if_ether.h>
+    /* ... */
+
+    /* From the example above: tcpdump -i em1 port 22 -dd */
+    struct sock_filter code[] = {
+	    { 0x28,  0,  0, 0x0000000c },
+	    { 0x15,  0,  8, 0x000086dd },
+	    { 0x30,  0,  0, 0x00000014 },
+	    { 0x15,  2,  0, 0x00000084 },
+	    { 0x15,  1,  0, 0x00000006 },
+	    { 0x15,  0, 17, 0x00000011 },
+	    { 0x28,  0,  0, 0x00000036 },
+	    { 0x15, 14,  0, 0x00000016 },
+	    { 0x28,  0,  0, 0x00000038 },
+	    { 0x15, 12, 13, 0x00000016 },
+	    { 0x15,  0, 12, 0x00000800 },
+	    { 0x30,  0,  0, 0x00000017 },
+	    { 0x15,  2,  0, 0x00000084 },
+	    { 0x15,  1,  0, 0x00000006 },
+	    { 0x15,  0,  8, 0x00000011 },
+	    { 0x28,  0,  0, 0x00000014 },
+	    { 0x45,  6,  0, 0x00001fff },
+	    { 0xb1,  0,  0, 0x0000000e },
+	    { 0x48,  0,  0, 0x0000000e },
+	    { 0x15,  2,  0, 0x00000016 },
+	    { 0x48,  0,  0, 0x00000010 },
+	    { 0x15,  0,  1, 0x00000016 },
+	    { 0x06,  0,  0, 0x0000ffff },
+	    { 0x06,  0,  0, 0x00000000 },
+    };
+
+    struct sock_fprog bpf = {
+	    .len = ARRAY_SIZE(code),
+	    .filter = code,
+    };
+
+    sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
+    if (sock < 0)
+	    /* ... bail out ... */
+
+    ret = setsockopt(sock, SOL_SOCKET, SO_ATTACH_FILTER, &bpf, sizeof(bpf));
+    if (ret < 0)
+	    /* ... bail out ... */
+
+    /* ... */
+    close(sock);
+
+The above example code attaches a socket filter for a PF_PACKET socket
+in order to let all IPv4/IPv6 packets with port 22 pass. The rest will
+be dropped for this socket.
+
+The setsockopt(2) call to SO_DETACH_FILTER doesn't need any arguments
+and SO_LOCK_FILTER for preventing the filter to be detached, takes an
+integer value with 0 or 1.
+
+Note that socket filters are not restricted to PF_PACKET sockets only,
+but can also be used on other socket families.
+
+Summary of system calls:
+
+ * setsockopt(sockfd, SOL_SOCKET, SO_ATTACH_FILTER, &val, sizeof(val));
+ * setsockopt(sockfd, SOL_SOCKET, SO_DETACH_FILTER, &val, sizeof(val));
+ * setsockopt(sockfd, SOL_SOCKET, SO_LOCK_FILTER,   &val, sizeof(val));
+
+Normally, most use cases for socket filtering on packet sockets will be
+covered by libpcap in high-level syntax, so as an application developer
+you should stick to that. libpcap wraps its own layer around all that.
+
+Unless i) using/linking to libpcap is not an option, ii) the required BPF
+filters use Linux extensions that are not supported by libpcap's compiler,
+iii) a filter might be more complex and not cleanly implementable with
+libpcap's compiler, or iv) particular filter codes should be optimized
+differently than libpcap's internal compiler does; then in such cases
+writing such a filter "by hand" can be of an alternative. For example,
+xt_bpf and cls_bpf users might have requirements that could result in
+more complex filter code, or one that cannot be expressed with libpcap
+(e.g. different return codes for various code paths). Moreover, BPF JIT
+implementors may wish to manually write test cases and thus need low-level
+access to BPF code as well.
+
+BPF engine and instruction set
+------------------------------
+
+Under tools/bpf/ there's a small helper tool called bpf_asm which can
+be used to write low-level filters for example scenarios mentioned in the
+previous section. Asm-like syntax mentioned here has been implemented in
+bpf_asm and will be used for further explanations (instead of dealing with
+less readable opcodes directly, principles are the same). The syntax is
+closely modelled after Steven McCanne's and Van Jacobson's BPF paper.
+
+The BPF architecture consists of the following basic elements:
+
+  =======          ====================================================
+  Element          Description
+  =======          ====================================================
+  A                32 bit wide accumulator
+  X                32 bit wide X register
+  M[]              16 x 32 bit wide misc registers aka "scratch memory
+		   store", addressable from 0 to 15
+  =======          ====================================================
+
+A program, that is translated by bpf_asm into "opcodes" is an array that
+consists of the following elements (as already mentioned)::
+
+  op:16, jt:8, jf:8, k:32
+
+The element op is a 16 bit wide opcode that has a particular instruction
+encoded. jt and jf are two 8 bit wide jump targets, one for condition
+"jump if true", the other one "jump if false". Eventually, element k
+contains a miscellaneous argument that can be interpreted in different
+ways depending on the given instruction in op.
+
+The instruction set consists of load, store, branch, alu, miscellaneous
+and return instructions that are also represented in bpf_asm syntax. This
+table lists all bpf_asm instructions available resp. what their underlying
+opcodes as defined in linux/filter.h stand for:
+
+  ===========      ===================  =====================
+  Instruction      Addressing mode      Description
+  ===========      ===================  =====================
+  ld               1, 2, 3, 4, 12       Load word into A
+  ldi              4                    Load word into A
+  ldh              1, 2                 Load half-word into A
+  ldb              1, 2                 Load byte into A
+  ldx              3, 4, 5, 12          Load word into X
+  ldxi             4                    Load word into X
+  ldxb             5                    Load byte into X
+
+  st               3                    Store A into M[]
+  stx              3                    Store X into M[]
+
+  jmp              6                    Jump to label
+  ja               6                    Jump to label
+  jeq              7, 8, 9, 10          Jump on A == <x>
+  jneq             9, 10                Jump on A != <x>
+  jne              9, 10                Jump on A != <x>
+  jlt              9, 10                Jump on A <  <x>
+  jle              9, 10                Jump on A <= <x>
+  jgt              7, 8, 9, 10          Jump on A >  <x>
+  jge              7, 8, 9, 10          Jump on A >= <x>
+  jset             7, 8, 9, 10          Jump on A &  <x>
+
+  add              0, 4                 A + <x>
+  sub              0, 4                 A - <x>
+  mul              0, 4                 A * <x>
+  div              0, 4                 A / <x>
+  mod              0, 4                 A % <x>
+  neg                                   !A
+  and              0, 4                 A & <x>
+  or               0, 4                 A | <x>
+  xor              0, 4                 A ^ <x>
+  lsh              0, 4                 A << <x>
+  rsh              0, 4                 A >> <x>
+
+  tax                                   Copy A into X
+  txa                                   Copy X into A
+
+  ret              4, 11                Return
+  ===========      ===================  =====================
+
+The next table shows addressing formats from the 2nd column:
+
+  ===============  ===================  ===============================================
+  Addressing mode  Syntax               Description
+  ===============  ===================  ===============================================
+   0               x/%x                 Register X
+   1               [k]                  BHW at byte offset k in the packet
+   2               [x + k]              BHW at the offset X + k in the packet
+   3               M[k]                 Word at offset k in M[]
+   4               #k                   Literal value stored in k
+   5               4*([k]&0xf)          Lower nibble * 4 at byte offset k in the packet
+   6               L                    Jump label L
+   7               #k,Lt,Lf             Jump to Lt if true, otherwise jump to Lf
+   8               x/%x,Lt,Lf           Jump to Lt if true, otherwise jump to Lf
+   9               #k,Lt                Jump to Lt if predicate is true
+  10               x/%x,Lt              Jump to Lt if predicate is true
+  11               a/%a                 Accumulator A
+  12               extension            BPF extension
+  ===============  ===================  ===============================================
+
+The Linux kernel also has a couple of BPF extensions that are used along
+with the class of load instructions by "overloading" the k argument with
+a negative offset + a particular extension offset. The result of such BPF
+extensions are loaded into A.
+
+Possible BPF extensions are shown in the following table:
+
+  ===================================   =================================================
+  Extension                             Description
+  ===================================   =================================================
+  len                                   skb->len
+  proto                                 skb->protocol
+  type                                  skb->pkt_type
+  poff                                  Payload start offset
+  ifidx                                 skb->dev->ifindex
+  nla                                   Netlink attribute of type X with offset A
+  nlan                                  Nested Netlink attribute of type X with offset A
+  mark                                  skb->mark
+  queue                                 skb->queue_mapping
+  hatype                                skb->dev->type
+  rxhash                                skb->hash
+  cpu                                   raw_smp_processor_id()
+  vlan_tci                              skb_vlan_tag_get(skb)
+  vlan_avail                            skb_vlan_tag_present(skb)
+  vlan_tpid                             skb->vlan_proto
+  rand                                  prandom_u32()
+  ===================================   =================================================
+
+These extensions can also be prefixed with '#'.
+Examples for low-level BPF:
+
+**ARP packets**::
+
+  ldh [12]
+  jne #0x806, drop
+  ret #-1
+  drop: ret #0
+
+**IPv4 TCP packets**::
+
+  ldh [12]
+  jne #0x800, drop
+  ldb [23]
+  jneq #6, drop
+  ret #-1
+  drop: ret #0
+
+**(Accelerated) VLAN w/ id 10**::
+
+  ld vlan_tci
+  jneq #10, drop
+  ret #-1
+  drop: ret #0
+
+**icmp random packet sampling, 1 in 4**:
+
+  ldh [12]
+  jne #0x800, drop
+  ldb [23]
+  jneq #1, drop
+  # get a random uint32 number
+  ld rand
+  mod #4
+  jneq #1, drop
+  ret #-1
+  drop: ret #0
+
+**SECCOMP filter example**::
+
+  ld [4]                  /* offsetof(struct seccomp_data, arch) */
+  jne #0xc000003e, bad    /* AUDIT_ARCH_X86_64 */
+  ld [0]                  /* offsetof(struct seccomp_data, nr) */
+  jeq #15, good           /* __NR_rt_sigreturn */
+  jeq #231, good          /* __NR_exit_group */
+  jeq #60, good           /* __NR_exit */
+  jeq #0, good            /* __NR_read */
+  jeq #1, good            /* __NR_write */
+  jeq #5, good            /* __NR_fstat */
+  jeq #9, good            /* __NR_mmap */
+  jeq #14, good           /* __NR_rt_sigprocmask */
+  jeq #13, good           /* __NR_rt_sigaction */
+  jeq #35, good           /* __NR_nanosleep */
+  bad: ret #0             /* SECCOMP_RET_KILL_THREAD */
+  good: ret #0x7fff0000   /* SECCOMP_RET_ALLOW */
+
+The above example code can be placed into a file (here called "foo"), and
+then be passed to the bpf_asm tool for generating opcodes, output that xt_bpf
+and cls_bpf understands and can directly be loaded with. Example with above
+ARP code::
+
+    $ ./bpf_asm foo
+    4,40 0 0 12,21 0 1 2054,6 0 0 4294967295,6 0 0 0,
+
+In copy and paste C-like output::
+
+    $ ./bpf_asm -c foo
+    { 0x28,  0,  0, 0x0000000c },
+    { 0x15,  0,  1, 0x00000806 },
+    { 0x06,  0,  0, 0xffffffff },
+    { 0x06,  0,  0, 0000000000 },
+
+In particular, as usage with xt_bpf or cls_bpf can result in more complex BPF
+filters that might not be obvious at first, it's good to test filters before
+attaching to a live system. For that purpose, there's a small tool called
+bpf_dbg under tools/bpf/ in the kernel source directory. This debugger allows
+for testing BPF filters against given pcap files, single stepping through the
+BPF code on the pcap's packets and to do BPF machine register dumps.
+
+Starting bpf_dbg is trivial and just requires issuing::
+
+    # ./bpf_dbg
+
+In case input and output do not equal stdin/stdout, bpf_dbg takes an
+alternative stdin source as a first argument, and an alternative stdout
+sink as a second one, e.g. `./bpf_dbg test_in.txt test_out.txt`.
+
+Other than that, a particular libreadline configuration can be set via
+file "~/.bpf_dbg_init" and the command history is stored in the file
+"~/.bpf_dbg_history".
+
+Interaction in bpf_dbg happens through a shell that also has auto-completion
+support (follow-up example commands starting with '>' denote bpf_dbg shell).
+The usual workflow would be to ...
+
+* load bpf 6,40 0 0 12,21 0 3 2048,48 0 0 23,21 0 1 1,6 0 0 65535,6 0 0 0
+  Loads a BPF filter from standard output of bpf_asm, or transformed via
+  e.g. ``tcpdump -iem1 -ddd port 22 | tr '\n' ','``. Note that for JIT
+  debugging (next section), this command creates a temporary socket and
+  loads the BPF code into the kernel. Thus, this will also be useful for
+  JIT developers.
+
+* load pcap foo.pcap
+
+  Loads standard tcpdump pcap file.
+
+* run [<n>]
+
+bpf passes:1 fails:9
+  Runs through all packets from a pcap to account how many passes and fails
+  the filter will generate. A limit of packets to traverse can be given.
+
+* disassemble::
+
+	l0:	ldh [12]
+	l1:	jeq #0x800, l2, l5
+	l2:	ldb [23]
+	l3:	jeq #0x1, l4, l5
+	l4:	ret #0xffff
+	l5:	ret #0
+
+  Prints out BPF code disassembly.
+
+* dump::
+
+	/* { op, jt, jf, k }, */
+	{ 0x28,  0,  0, 0x0000000c },
+	{ 0x15,  0,  3, 0x00000800 },
+	{ 0x30,  0,  0, 0x00000017 },
+	{ 0x15,  0,  1, 0x00000001 },
+	{ 0x06,  0,  0, 0x0000ffff },
+	{ 0x06,  0,  0, 0000000000 },
+
+  Prints out C-style BPF code dump.
+
+* breakpoint 0::
+
+	breakpoint at: l0:	ldh [12]
+
+* breakpoint 1::
+
+	breakpoint at: l1:	jeq #0x800, l2, l5
+
+  ...
+
+  Sets breakpoints at particular BPF instructions. Issuing a `run` command
+  will walk through the pcap file continuing from the current packet and
+  break when a breakpoint is being hit (another `run` will continue from
+  the currently active breakpoint executing next instructions):
+
+  * run::
+
+	-- register dump --
+	pc:       [0]                       <-- program counter
+	code:     [40] jt[0] jf[0] k[12]    <-- plain BPF code of current instruction
+	curr:     l0:	ldh [12]              <-- disassembly of current instruction
+	A:        [00000000][0]             <-- content of A (hex, decimal)
+	X:        [00000000][0]             <-- content of X (hex, decimal)
+	M[0,15]:  [00000000][0]             <-- folded content of M (hex, decimal)
+	-- packet dump --                   <-- Current packet from pcap (hex)
+	len: 42
+	    0: 00 19 cb 55 55 a4 00 14 a4 43 78 69 08 06 00 01
+	16: 08 00 06 04 00 01 00 14 a4 43 78 69 0a 3b 01 26
+	32: 00 00 00 00 00 00 0a 3b 01 01
+	(breakpoint)
+	>
+
+  * breakpoint::
+
+	breakpoints: 0 1
+
+    Prints currently set breakpoints.
+
+* step [-<n>, +<n>]
+
+  Performs single stepping through the BPF program from the current pc
+  offset. Thus, on each step invocation, above register dump is issued.
+  This can go forwards and backwards in time, a plain `step` will break
+  on the next BPF instruction, thus +1. (No `run` needs to be issued here.)
+
+* select <n>
+
+  Selects a given packet from the pcap file to continue from. Thus, on
+  the next `run` or `step`, the BPF program is being evaluated against
+  the user pre-selected packet. Numbering starts just as in Wireshark
+  with index 1.
+
+* quit
+
+  Exits bpf_dbg.
+
+JIT compiler
+------------
+
+The Linux kernel has a built-in BPF JIT compiler for x86_64, SPARC,
+PowerPC, ARM, ARM64, MIPS, RISC-V and s390 and can be enabled through
+CONFIG_BPF_JIT. The JIT compiler is transparently invoked for each
+attached filter from user space or for internal kernel users if it has
+been previously enabled by root::
+
+  echo 1 > /proc/sys/net/core/bpf_jit_enable
+
+For JIT developers, doing audits etc, each compile run can output the generated
+opcode image into the kernel log via::
+
+  echo 2 > /proc/sys/net/core/bpf_jit_enable
+
+Example output from dmesg::
+
+    [ 3389.935842] flen=6 proglen=70 pass=3 image=ffffffffa0069c8f
+    [ 3389.935847] JIT code: 00000000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 68
+    [ 3389.935849] JIT code: 00000010: 44 2b 4f 6c 4c 8b 87 d8 00 00 00 be 0c 00 00 00
+    [ 3389.935850] JIT code: 00000020: e8 1d 94 ff e0 3d 00 08 00 00 75 16 be 17 00 00
+    [ 3389.935851] JIT code: 00000030: 00 e8 28 94 ff e0 83 f8 01 75 07 b8 ff ff 00 00
+    [ 3389.935852] JIT code: 00000040: eb 02 31 c0 c9 c3
+
+When CONFIG_BPF_JIT_ALWAYS_ON is enabled, bpf_jit_enable is permanently set to 1 and
+setting any other value than that will return in failure. This is even the case for
+setting bpf_jit_enable to 2, since dumping the final JIT image into the kernel log
+is discouraged and introspection through bpftool (under tools/bpf/bpftool/) is the
+generally recommended approach instead.
+
+In the kernel source tree under tools/bpf/, there's bpf_jit_disasm for
+generating disassembly out of the kernel log's hexdump::
+
+	# ./bpf_jit_disasm
+	70 bytes emitted from JIT compiler (pass:3, flen:6)
+	ffffffffa0069c8f + <x>:
+	0:	push   %rbp
+	1:	mov    %rsp,%rbp
+	4:	sub    $0x60,%rsp
+	8:	mov    %rbx,-0x8(%rbp)
+	c:	mov    0x68(%rdi),%r9d
+	10:	sub    0x6c(%rdi),%r9d
+	14:	mov    0xd8(%rdi),%r8
+	1b:	mov    $0xc,%esi
+	20:	callq  0xffffffffe0ff9442
+	25:	cmp    $0x800,%eax
+	2a:	jne    0x0000000000000042
+	2c:	mov    $0x17,%esi
+	31:	callq  0xffffffffe0ff945e
+	36:	cmp    $0x1,%eax
+	39:	jne    0x0000000000000042
+	3b:	mov    $0xffff,%eax
+	40:	jmp    0x0000000000000044
+	42:	xor    %eax,%eax
+	44:	leaveq
+	45:	retq
+
+	Issuing option `-o` will "annotate" opcodes to resulting assembler
+	instructions, which can be very useful for JIT developers:
+
+	# ./bpf_jit_disasm -o
+	70 bytes emitted from JIT compiler (pass:3, flen:6)
+	ffffffffa0069c8f + <x>:
+	0:	push   %rbp
+		55
+	1:	mov    %rsp,%rbp
+		48 89 e5
+	4:	sub    $0x60,%rsp
+		48 83 ec 60
+	8:	mov    %rbx,-0x8(%rbp)
+		48 89 5d f8
+	c:	mov    0x68(%rdi),%r9d
+		44 8b 4f 68
+	10:	sub    0x6c(%rdi),%r9d
+		44 2b 4f 6c
+	14:	mov    0xd8(%rdi),%r8
+		4c 8b 87 d8 00 00 00
+	1b:	mov    $0xc,%esi
+		be 0c 00 00 00
+	20:	callq  0xffffffffe0ff9442
+		e8 1d 94 ff e0
+	25:	cmp    $0x800,%eax
+		3d 00 08 00 00
+	2a:	jne    0x0000000000000042
+		75 16
+	2c:	mov    $0x17,%esi
+		be 17 00 00 00
+	31:	callq  0xffffffffe0ff945e
+		e8 28 94 ff e0
+	36:	cmp    $0x1,%eax
+		83 f8 01
+	39:	jne    0x0000000000000042
+		75 07
+	3b:	mov    $0xffff,%eax
+		b8 ff ff 00 00
+	40:	jmp    0x0000000000000044
+		eb 02
+	42:	xor    %eax,%eax
+		31 c0
+	44:	leaveq
+		c9
+	45:	retq
+		c3
+
+For BPF JIT developers, bpf_jit_disasm, bpf_asm and bpf_dbg provides a useful
+toolchain for developing and testing the kernel's JIT compiler.
+
+BPF kernel internals
+--------------------
+Internally, for the kernel interpreter, a different instruction set
+format with similar underlying principles from BPF described in previous
+paragraphs is being used. However, the instruction set format is modelled
+closer to the underlying architecture to mimic native instruction sets, so
+that a better performance can be achieved (more details later). This new
+ISA is called 'eBPF' or 'internal BPF' interchangeably. (Note: eBPF which
+originates from [e]xtended BPF is not the same as BPF extensions! While
+eBPF is an ISA, BPF extensions date back to classic BPF's 'overloading'
+of BPF_LD | BPF_{B,H,W} | BPF_ABS instruction.)
+
+It is designed to be JITed with one to one mapping, which can also open up
+the possibility for GCC/LLVM compilers to generate optimized eBPF code through
+an eBPF backend that performs almost as fast as natively compiled code.
+
+The new instruction set was originally designed with the possible goal in
+mind to write programs in "restricted C" and compile into eBPF with a optional
+GCC/LLVM backend, so that it can just-in-time map to modern 64-bit CPUs with
+minimal performance overhead over two steps, that is, C -> eBPF -> native code.
+
+Currently, the new format is being used for running user BPF programs, which
+includes seccomp BPF, classic socket filters, cls_bpf traffic classifier,
+team driver's classifier for its load-balancing mode, netfilter's xt_bpf
+extension, PTP dissector/classifier, and much more. They are all internally
+converted by the kernel into the new instruction set representation and run
+in the eBPF interpreter. For in-kernel handlers, this all works transparently
+by using bpf_prog_create() for setting up the filter, resp.
+bpf_prog_destroy() for destroying it. The macro
+BPF_PROG_RUN(filter, ctx) transparently invokes eBPF interpreter or JITed
+code to run the filter. 'filter' is a pointer to struct bpf_prog that we
+got from bpf_prog_create(), and 'ctx' the given context (e.g.
+skb pointer). All constraints and restrictions from bpf_check_classic() apply
+before a conversion to the new layout is being done behind the scenes!
+
+Currently, the classic BPF format is being used for JITing on most
+32-bit architectures, whereas x86-64, aarch64, s390x, powerpc64,
+sparc64, arm32, riscv64, riscv32 perform JIT compilation from eBPF
+instruction set.
+
+Some core changes of the new internal format:
+
+- Number of registers increase from 2 to 10:
+
+  The old format had two registers A and X, and a hidden frame pointer. The
+  new layout extends this to be 10 internal registers and a read-only frame
+  pointer. Since 64-bit CPUs are passing arguments to functions via registers
+  the number of args from eBPF program to in-kernel function is restricted
+  to 5 and one register is used to accept return value from an in-kernel
+  function. Natively, x86_64 passes first 6 arguments in registers, aarch64/
+  sparcv9/mips64 have 7 - 8 registers for arguments; x86_64 has 6 callee saved
+  registers, and aarch64/sparcv9/mips64 have 11 or more callee saved registers.
+
+  Therefore, eBPF calling convention is defined as:
+
+    * R0	- return value from in-kernel function, and exit value for eBPF program
+    * R1 - R5	- arguments from eBPF program to in-kernel function
+    * R6 - R9	- callee saved registers that in-kernel function will preserve
+    * R10	- read-only frame pointer to access stack
+
+  Thus, all eBPF registers map one to one to HW registers on x86_64, aarch64,
+  etc, and eBPF calling convention maps directly to ABIs used by the kernel on
+  64-bit architectures.
+
+  On 32-bit architectures JIT may map programs that use only 32-bit arithmetic
+  and may let more complex programs to be interpreted.
+
+  R0 - R5 are scratch registers and eBPF program needs spill/fill them if
+  necessary across calls. Note that there is only one eBPF program (== one
+  eBPF main routine) and it cannot call other eBPF functions, it can only
+  call predefined in-kernel functions, though.
+
+- Register width increases from 32-bit to 64-bit:
+
+  Still, the semantics of the original 32-bit ALU operations are preserved
+  via 32-bit subregisters. All eBPF registers are 64-bit with 32-bit lower
+  subregisters that zero-extend into 64-bit if they are being written to.
+  That behavior maps directly to x86_64 and arm64 subregister definition, but
+  makes other JITs more difficult.
+
+  32-bit architectures run 64-bit internal BPF programs via interpreter.
+  Their JITs may convert BPF programs that only use 32-bit subregisters into
+  native instruction set and let the rest being interpreted.
+
+  Operation is 64-bit, because on 64-bit architectures, pointers are also
+  64-bit wide, and we want to pass 64-bit values in/out of kernel functions,
+  so 32-bit eBPF registers would otherwise require to define register-pair
+  ABI, thus, there won't be able to use a direct eBPF register to HW register
+  mapping and JIT would need to do combine/split/move operations for every
+  register in and out of the function, which is complex, bug prone and slow.
+  Another reason is the use of atomic 64-bit counters.
+
+- Conditional jt/jf targets replaced with jt/fall-through:
+
+  While the original design has constructs such as ``if (cond) jump_true;
+  else jump_false;``, they are being replaced into alternative constructs like
+  ``if (cond) jump_true; /* else fall-through */``.
+
+- Introduces bpf_call insn and register passing convention for zero overhead
+  calls from/to other kernel functions:
+
+  Before an in-kernel function call, the internal BPF program needs to
+  place function arguments into R1 to R5 registers to satisfy calling
+  convention, then the interpreter will take them from registers and pass
+  to in-kernel function. If R1 - R5 registers are mapped to CPU registers
+  that are used for argument passing on given architecture, the JIT compiler
+  doesn't need to emit extra moves. Function arguments will be in the correct
+  registers and BPF_CALL instruction will be JITed as single 'call' HW
+  instruction. This calling convention was picked to cover common call
+  situations without performance penalty.
+
+  After an in-kernel function call, R1 - R5 are reset to unreadable and R0 has
+  a return value of the function. Since R6 - R9 are callee saved, their state
+  is preserved across the call.
+
+  For example, consider three C functions::
+
+    u64 f1() { return (*_f2)(1); }
+    u64 f2(u64 a) { return f3(a + 1, a); }
+    u64 f3(u64 a, u64 b) { return a - b; }
+
+  GCC can compile f1, f3 into x86_64::
+
+    f1:
+	movl $1, %edi
+	movq _f2(%rip), %rax
+	jmp  *%rax
+    f3:
+	movq %rdi, %rax
+	subq %rsi, %rax
+	ret
+
+  Function f2 in eBPF may look like::
+
+    f2:
+	bpf_mov R2, R1
+	bpf_add R1, 1
+	bpf_call f3
+	bpf_exit
+
+  If f2 is JITed and the pointer stored to ``_f2``. The calls f1 -> f2 -> f3 and
+  returns will be seamless. Without JIT, __bpf_prog_run() interpreter needs to
+  be used to call into f2.
+
+  For practical reasons all eBPF programs have only one argument 'ctx' which is
+  already placed into R1 (e.g. on __bpf_prog_run() startup) and the programs
+  can call kernel functions with up to 5 arguments. Calls with 6 or more arguments
+  are currently not supported, but these restrictions can be lifted if necessary
+  in the future.
+
+  On 64-bit architectures all register map to HW registers one to one. For
+  example, x86_64 JIT compiler can map them as ...
+
+  ::
+
+    R0 - rax
+    R1 - rdi
+    R2 - rsi
+    R3 - rdx
+    R4 - rcx
+    R5 - r8
+    R6 - rbx
+    R7 - r13
+    R8 - r14
+    R9 - r15
+    R10 - rbp
+
+  ... since x86_64 ABI mandates rdi, rsi, rdx, rcx, r8, r9 for argument passing
+  and rbx, r12 - r15 are callee saved.
+
+  Then the following internal BPF pseudo-program::
+
+    bpf_mov R6, R1 /* save ctx */
+    bpf_mov R2, 2
+    bpf_mov R3, 3
+    bpf_mov R4, 4
+    bpf_mov R5, 5
+    bpf_call foo
+    bpf_mov R7, R0 /* save foo() return value */
+    bpf_mov R1, R6 /* restore ctx for next call */
+    bpf_mov R2, 6
+    bpf_mov R3, 7
+    bpf_mov R4, 8
+    bpf_mov R5, 9
+    bpf_call bar
+    bpf_add R0, R7
+    bpf_exit
+
+  After JIT to x86_64 may look like::
+
+    push %rbp
+    mov %rsp,%rbp
+    sub $0x228,%rsp
+    mov %rbx,-0x228(%rbp)
+    mov %r13,-0x220(%rbp)
+    mov %rdi,%rbx
+    mov $0x2,%esi
+    mov $0x3,%edx
+    mov $0x4,%ecx
+    mov $0x5,%r8d
+    callq foo
+    mov %rax,%r13
+    mov %rbx,%rdi
+    mov $0x6,%esi
+    mov $0x7,%edx
+    mov $0x8,%ecx
+    mov $0x9,%r8d
+    callq bar
+    add %r13,%rax
+    mov -0x228(%rbp),%rbx
+    mov -0x220(%rbp),%r13
+    leaveq
+    retq
+
+  Which is in this example equivalent in C to::
+
+    u64 bpf_filter(u64 ctx)
+    {
+	return foo(ctx, 2, 3, 4, 5) + bar(ctx, 6, 7, 8, 9);
+    }
+
+  In-kernel functions foo() and bar() with prototype: u64 (*)(u64 arg1, u64
+  arg2, u64 arg3, u64 arg4, u64 arg5); will receive arguments in proper
+  registers and place their return value into ``%rax`` which is R0 in eBPF.
+  Prologue and epilogue are emitted by JIT and are implicit in the
+  interpreter. R0-R5 are scratch registers, so eBPF program needs to preserve
+  them across the calls as defined by calling convention.
+
+  For example the following program is invalid::
+
+    bpf_mov R1, 1
+    bpf_call foo
+    bpf_mov R0, R1
+    bpf_exit
+
+  After the call the registers R1-R5 contain junk values and cannot be read.
+  An in-kernel eBPF verifier is used to validate internal BPF programs.
+
+Also in the new design, eBPF is limited to 4096 insns, which means that any
+program will terminate quickly and will only call a fixed number of kernel
+functions. Original BPF and the new format are two operand instructions,
+which helps to do one-to-one mapping between eBPF insn and x86 insn during JIT.
+
+The input context pointer for invoking the interpreter function is generic,
+its content is defined by a specific use case. For seccomp register R1 points
+to seccomp_data, for converted BPF filters R1 points to a skb.
+
+A program, that is translated internally consists of the following elements::
+
+  op:16, jt:8, jf:8, k:32    ==>    op:8, dst_reg:4, src_reg:4, off:16, imm:32
+
+So far 87 internal BPF instructions were implemented. 8-bit 'op' opcode field
+has room for new instructions. Some of them may use 16/24/32 byte encoding. New
+instructions must be multiple of 8 bytes to preserve backward compatibility.
+
+Internal BPF is a general purpose RISC instruction set. Not every register and
+every instruction are used during translation from original BPF to new format.
+For example, socket filters are not using ``exclusive add`` instruction, but
+tracing filters may do to maintain counters of events, for example. Register R9
+is not used by socket filters either, but more complex filters may be running
+out of registers and would have to resort to spill/fill to stack.
+
+Internal BPF can be used as a generic assembler for last step performance
+optimizations, socket filters and seccomp are using it as assembler. Tracing
+filters may use it as assembler to generate code from kernel. In kernel usage
+may not be bounded by security considerations, since generated internal BPF code
+may be optimizing internal code path and not being exposed to the user space.
+Safety of internal BPF can come from a verifier (TBD). In such use cases as
+described, it may be used as safe instruction set.
+
+Just like the original BPF, the new format runs within a controlled environment,
+is deterministic and the kernel can easily prove that. The safety of the program
+can be determined in two steps: first step does depth-first-search to disallow
+loops and other CFG validation; second step starts from the first insn and
+descends all possible paths. It simulates execution of every insn and observes
+the state change of registers and stack.
+
+eBPF opcode encoding
+--------------------
+
+eBPF is reusing most of the opcode encoding from classic to simplify conversion
+of classic BPF to eBPF. For arithmetic and jump instructions the 8-bit 'code'
+field is divided into three parts::
+
+  +----------------+--------+--------------------+
+  |   4 bits       |  1 bit |   3 bits           |
+  | operation code | source | instruction class  |
+  +----------------+--------+--------------------+
+  (MSB)                                      (LSB)
+
+Three LSB bits store instruction class which is one of:
+
+  ===================     ===============
+  Classic BPF classes     eBPF classes
+  ===================     ===============
+  BPF_LD    0x00          BPF_LD    0x00
+  BPF_LDX   0x01          BPF_LDX   0x01
+  BPF_ST    0x02          BPF_ST    0x02
+  BPF_STX   0x03          BPF_STX   0x03
+  BPF_ALU   0x04          BPF_ALU   0x04
+  BPF_JMP   0x05          BPF_JMP   0x05
+  BPF_RET   0x06          BPF_JMP32 0x06
+  BPF_MISC  0x07          BPF_ALU64 0x07
+  ===================     ===============
+
+When BPF_CLASS(code) == BPF_ALU or BPF_JMP, 4th bit encodes source operand ...
+
+    ::
+
+	BPF_K     0x00
+	BPF_X     0x08
+
+ * in classic BPF, this means::
+
+	BPF_SRC(code) == BPF_X - use register X as source operand
+	BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand
+
+ * in eBPF, this means::
+
+	BPF_SRC(code) == BPF_X - use 'src_reg' register as source operand
+	BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand
+
+... and four MSB bits store operation code.
+
+If BPF_CLASS(code) == BPF_ALU or BPF_ALU64 [ in eBPF ], BPF_OP(code) is one of::
+
+  BPF_ADD   0x00
+  BPF_SUB   0x10
+  BPF_MUL   0x20
+  BPF_DIV   0x30
+  BPF_OR    0x40
+  BPF_AND   0x50
+  BPF_LSH   0x60
+  BPF_RSH   0x70
+  BPF_NEG   0x80
+  BPF_MOD   0x90
+  BPF_XOR   0xa0
+  BPF_MOV   0xb0  /* eBPF only: mov reg to reg */
+  BPF_ARSH  0xc0  /* eBPF only: sign extending shift right */
+  BPF_END   0xd0  /* eBPF only: endianness conversion */
+
+If BPF_CLASS(code) == BPF_JMP or BPF_JMP32 [ in eBPF ], BPF_OP(code) is one of::
+
+  BPF_JA    0x00  /* BPF_JMP only */
+  BPF_JEQ   0x10
+  BPF_JGT   0x20
+  BPF_JGE   0x30
+  BPF_JSET  0x40
+  BPF_JNE   0x50  /* eBPF only: jump != */
+  BPF_JSGT  0x60  /* eBPF only: signed '>' */
+  BPF_JSGE  0x70  /* eBPF only: signed '>=' */
+  BPF_CALL  0x80  /* eBPF BPF_JMP only: function call */
+  BPF_EXIT  0x90  /* eBPF BPF_JMP only: function return */
+  BPF_JLT   0xa0  /* eBPF only: unsigned '<' */
+  BPF_JLE   0xb0  /* eBPF only: unsigned '<=' */
+  BPF_JSLT  0xc0  /* eBPF only: signed '<' */
+  BPF_JSLE  0xd0  /* eBPF only: signed '<=' */
+
+So BPF_ADD | BPF_X | BPF_ALU means 32-bit addition in both classic BPF
+and eBPF. There are only two registers in classic BPF, so it means A += X.
+In eBPF it means dst_reg = (u32) dst_reg + (u32) src_reg; similarly,
+BPF_XOR | BPF_K | BPF_ALU means A ^= imm32 in classic BPF and analogous
+src_reg = (u32) src_reg ^ (u32) imm32 in eBPF.
+
+Classic BPF is using BPF_MISC class to represent A = X and X = A moves.
+eBPF is using BPF_MOV | BPF_X | BPF_ALU code instead. Since there are no
+BPF_MISC operations in eBPF, the class 7 is used as BPF_ALU64 to mean
+exactly the same operations as BPF_ALU, but with 64-bit wide operands
+instead. So BPF_ADD | BPF_X | BPF_ALU64 means 64-bit addition, i.e.:
+dst_reg = dst_reg + src_reg
+
+Classic BPF wastes the whole BPF_RET class to represent a single ``ret``
+operation. Classic BPF_RET | BPF_K means copy imm32 into return register
+and perform function exit. eBPF is modeled to match CPU, so BPF_JMP | BPF_EXIT
+in eBPF means function exit only. The eBPF program needs to store return
+value into register R0 before doing a BPF_EXIT. Class 6 in eBPF is used as
+BPF_JMP32 to mean exactly the same operations as BPF_JMP, but with 32-bit wide
+operands for the comparisons instead.
+
+For load and store instructions the 8-bit 'code' field is divided as::
+
+  +--------+--------+-------------------+
+  | 3 bits | 2 bits |   3 bits          |
+  |  mode  |  size  | instruction class |
+  +--------+--------+-------------------+
+  (MSB)                             (LSB)
+
+Size modifier is one of ...
+
+::
+
+  BPF_W   0x00    /* word */
+  BPF_H   0x08    /* half word */
+  BPF_B   0x10    /* byte */
+  BPF_DW  0x18    /* eBPF only, double word */
+
+... which encodes size of load/store operation::
+
+ B  - 1 byte
+ H  - 2 byte
+ W  - 4 byte
+ DW - 8 byte (eBPF only)
+
+Mode modifier is one of::
+
+  BPF_IMM  0x00  /* used for 32-bit mov in classic BPF and 64-bit in eBPF */
+  BPF_ABS  0x20
+  BPF_IND  0x40
+  BPF_MEM  0x60
+  BPF_LEN  0x80  /* classic BPF only, reserved in eBPF */
+  BPF_MSH  0xa0  /* classic BPF only, reserved in eBPF */
+  BPF_XADD 0xc0  /* eBPF only, exclusive add */
+
+eBPF has two non-generic instructions: (BPF_ABS | <size> | BPF_LD) and
+(BPF_IND | <size> | BPF_LD) which are used to access packet data.
+
+They had to be carried over from classic to have strong performance of
+socket filters running in eBPF interpreter. These instructions can only
+be used when interpreter context is a pointer to ``struct sk_buff`` and
+have seven implicit operands. Register R6 is an implicit input that must
+contain pointer to sk_buff. Register R0 is an implicit output which contains
+the data fetched from the packet. Registers R1-R5 are scratch registers
+and must not be used to store the data across BPF_ABS | BPF_LD or
+BPF_IND | BPF_LD instructions.
+
+These instructions have implicit program exit condition as well. When
+eBPF program is trying to access the data beyond the packet boundary,
+the interpreter will abort the execution of the program. JIT compilers
+therefore must preserve this property. src_reg and imm32 fields are
+explicit inputs to these instructions.
+
+For example::
+
+  BPF_IND | BPF_W | BPF_LD means:
+
+    R0 = ntohl(*(u32 *) (((struct sk_buff *) R6)->data + src_reg + imm32))
+    and R1 - R5 were scratched.
+
+Unlike classic BPF instruction set, eBPF has generic load/store operations::
+
+    BPF_MEM | <size> | BPF_STX:  *(size *) (dst_reg + off) = src_reg
+    BPF_MEM | <size> | BPF_ST:   *(size *) (dst_reg + off) = imm32
+    BPF_MEM | <size> | BPF_LDX:  dst_reg = *(size *) (src_reg + off)
+    BPF_XADD | BPF_W  | BPF_STX: lock xadd *(u32 *)(dst_reg + off16) += src_reg
+    BPF_XADD | BPF_DW | BPF_STX: lock xadd *(u64 *)(dst_reg + off16) += src_reg
+
+Where size is one of: BPF_B or BPF_H or BPF_W or BPF_DW. Note that 1 and
+2 byte atomic increments are not supported.
+
+eBPF has one 16-byte instruction: BPF_LD | BPF_DW | BPF_IMM which consists
+of two consecutive ``struct bpf_insn`` 8-byte blocks and interpreted as single
+instruction that loads 64-bit immediate value into a dst_reg.
+Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads
+32-bit immediate value into a register.
+
+eBPF verifier
+-------------
+The safety of the eBPF program is determined in two steps.
+
+First step does DAG check to disallow loops and other CFG validation.
+In particular it will detect programs that have unreachable instructions.
+(though classic BPF checker allows them)
+
+Second step starts from the first insn and descends all possible paths.
+It simulates execution of every insn and observes the state change of
+registers and stack.
+
+At the start of the program the register R1 contains a pointer to context
+and has type PTR_TO_CTX.
+If verifier sees an insn that does R2=R1, then R2 has now type
+PTR_TO_CTX as well and can be used on the right hand side of expression.
+If R1=PTR_TO_CTX and insn is R2=R1+R1, then R2=SCALAR_VALUE,
+since addition of two valid pointers makes invalid pointer.
+(In 'secure' mode verifier will reject any type of pointer arithmetic to make
+sure that kernel addresses don't leak to unprivileged users)
+
+If register was never written to, it's not readable::
+
+  bpf_mov R0 = R2
+  bpf_exit
+
+will be rejected, since R2 is unreadable at the start of the program.
+
+After kernel function call, R1-R5 are reset to unreadable and
+R0 has a return type of the function.
+
+Since R6-R9 are callee saved, their state is preserved across the call.
+
+::
+
+  bpf_mov R6 = 1
+  bpf_call foo
+  bpf_mov R0 = R6
+  bpf_exit
+
+is a correct program. If there was R1 instead of R6, it would have
+been rejected.
+
+load/store instructions are allowed only with registers of valid types, which
+are PTR_TO_CTX, PTR_TO_MAP, PTR_TO_STACK. They are bounds and alignment checked.
+For example::
+
+ bpf_mov R1 = 1
+ bpf_mov R2 = 2
+ bpf_xadd *(u32 *)(R1 + 3) += R2
+ bpf_exit
+
+will be rejected, since R1 doesn't have a valid pointer type at the time of
+execution of instruction bpf_xadd.
+
+At the start R1 type is PTR_TO_CTX (a pointer to generic ``struct bpf_context``)
+A callback is used to customize verifier to restrict eBPF program access to only
+certain fields within ctx structure with specified size and alignment.
+
+For example, the following insn::
+
+  bpf_ld R0 = *(u32 *)(R6 + 8)
+
+intends to load a word from address R6 + 8 and store it into R0
+If R6=PTR_TO_CTX, via is_valid_access() callback the verifier will know
+that offset 8 of size 4 bytes can be accessed for reading, otherwise
+the verifier will reject the program.
+If R6=PTR_TO_STACK, then access should be aligned and be within
+stack bounds, which are [-MAX_BPF_STACK, 0). In this example offset is 8,
+so it will fail verification, since it's out of bounds.
+
+The verifier will allow eBPF program to read data from stack only after
+it wrote into it.
+
+Classic BPF verifier does similar check with M[0-15] memory slots.
+For example::
+
+  bpf_ld R0 = *(u32 *)(R10 - 4)
+  bpf_exit
+
+is invalid program.
+Though R10 is correct read-only register and has type PTR_TO_STACK
+and R10 - 4 is within stack bounds, there were no stores into that location.
+
+Pointer register spill/fill is tracked as well, since four (R6-R9)
+callee saved registers may not be enough for some programs.
+
+Allowed function calls are customized with bpf_verifier_ops->get_func_proto()
+The eBPF verifier will check that registers match argument constraints.
+After the call register R0 will be set to return type of the function.
+
+Function calls is a main mechanism to extend functionality of eBPF programs.
+Socket filters may let programs to call one set of functions, whereas tracing
+filters may allow completely different set.
+
+If a function made accessible to eBPF program, it needs to be thought through
+from safety point of view. The verifier will guarantee that the function is
+called with valid arguments.
+
+seccomp vs socket filters have different security restrictions for classic BPF.
+Seccomp solves this by two stage verifier: classic BPF verifier is followed
+by seccomp verifier. In case of eBPF one configurable verifier is shared for
+all use cases.
+
+See details of eBPF verifier in kernel/bpf/verifier.c
+
+Register value tracking
+-----------------------
+In order to determine the safety of an eBPF program, the verifier must track
+the range of possible values in each register and also in each stack slot.
+This is done with ``struct bpf_reg_state``, defined in include/linux/
+bpf_verifier.h, which unifies tracking of scalar and pointer values.  Each
+register state has a type, which is either NOT_INIT (the register has not been
+written to), SCALAR_VALUE (some value which is not usable as a pointer), or a
+pointer type.  The types of pointers describe their base, as follows:
+
+
+    PTR_TO_CTX
+			Pointer to bpf_context.
+    CONST_PTR_TO_MAP
+			Pointer to struct bpf_map.  "Const" because arithmetic
+			on these pointers is forbidden.
+    PTR_TO_MAP_VALUE
+			Pointer to the value stored in a map element.
+    PTR_TO_MAP_VALUE_OR_NULL
+			Either a pointer to a map value, or NULL; map accesses
+			(see section 'eBPF maps', below) return this type,
+			which becomes a PTR_TO_MAP_VALUE when checked != NULL.
+			Arithmetic on these pointers is forbidden.
+    PTR_TO_STACK
+			Frame pointer.
+    PTR_TO_PACKET
+			skb->data.
+    PTR_TO_PACKET_END
+			skb->data + headlen; arithmetic forbidden.
+    PTR_TO_SOCKET
+			Pointer to struct bpf_sock_ops, implicitly refcounted.
+    PTR_TO_SOCKET_OR_NULL
+			Either a pointer to a socket, or NULL; socket lookup
+			returns this type, which becomes a PTR_TO_SOCKET when
+			checked != NULL. PTR_TO_SOCKET is reference-counted,
+			so programs must release the reference through the
+			socket release function before the end of the program.
+			Arithmetic on these pointers is forbidden.
+
+However, a pointer may be offset from this base (as a result of pointer
+arithmetic), and this is tracked in two parts: the 'fixed offset' and 'variable
+offset'.  The former is used when an exactly-known value (e.g. an immediate
+operand) is added to a pointer, while the latter is used for values which are
+not exactly known.  The variable offset is also used in SCALAR_VALUEs, to track
+the range of possible values in the register.
+
+The verifier's knowledge about the variable offset consists of:
+
+* minimum and maximum values as unsigned
+* minimum and maximum values as signed
+
+* knowledge of the values of individual bits, in the form of a 'tnum': a u64
+  'mask' and a u64 'value'.  1s in the mask represent bits whose value is unknown;
+  1s in the value represent bits known to be 1.  Bits known to be 0 have 0 in both
+  mask and value; no bit should ever be 1 in both.  For example, if a byte is read
+  into a register from memory, the register's top 56 bits are known zero, while
+  the low 8 are unknown - which is represented as the tnum (0x0; 0xff).  If we
+  then OR this with 0x40, we get (0x40; 0xbf), then if we add 1 we get (0x0;
+  0x1ff), because of potential carries.
+
+Besides arithmetic, the register state can also be updated by conditional
+branches.  For instance, if a SCALAR_VALUE is compared > 8, in the 'true' branch
+it will have a umin_value (unsigned minimum value) of 9, whereas in the 'false'
+branch it will have a umax_value of 8.  A signed compare (with BPF_JSGT or
+BPF_JSGE) would instead update the signed minimum/maximum values.  Information
+from the signed and unsigned bounds can be combined; for instance if a value is
+first tested < 8 and then tested s> 4, the verifier will conclude that the value
+is also > 4 and s< 8, since the bounds prevent crossing the sign boundary.
+
+PTR_TO_PACKETs with a variable offset part have an 'id', which is common to all
+pointers sharing that same variable offset.  This is important for packet range
+checks: after adding a variable to a packet pointer register A, if you then copy
+it to another register B and then add a constant 4 to A, both registers will
+share the same 'id' but the A will have a fixed offset of +4.  Then if A is
+bounds-checked and found to be less than a PTR_TO_PACKET_END, the register B is
+now known to have a safe range of at least 4 bytes.  See 'Direct packet access',
+below, for more on PTR_TO_PACKET ranges.
+
+The 'id' field is also used on PTR_TO_MAP_VALUE_OR_NULL, common to all copies of
+the pointer returned from a map lookup.  This means that when one copy is
+checked and found to be non-NULL, all copies can become PTR_TO_MAP_VALUEs.
+As well as range-checking, the tracked information is also used for enforcing
+alignment of pointer accesses.  For instance, on most systems the packet pointer
+is 2 bytes after a 4-byte alignment.  If a program adds 14 bytes to that to jump
+over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting
+pointer will have a variable offset known to be 4n+2 for some n, so adding the 2
+bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through
+that pointer are safe.
+The 'id' field is also used on PTR_TO_SOCKET and PTR_TO_SOCKET_OR_NULL, common
+to all copies of the pointer returned from a socket lookup. This has similar
+behaviour to the handling for PTR_TO_MAP_VALUE_OR_NULL->PTR_TO_MAP_VALUE, but
+it also handles reference tracking for the pointer. PTR_TO_SOCKET implicitly
+represents a reference to the corresponding ``struct sock``. To ensure that the
+reference is not leaked, it is imperative to NULL-check the reference and in
+the non-NULL case, and pass the valid reference to the socket release function.
+
+Direct packet access
+--------------------
+In cls_bpf and act_bpf programs the verifier allows direct access to the packet
+data via skb->data and skb->data_end pointers.
+Ex::
+
+    1:  r4 = *(u32 *)(r1 +80)  /* load skb->data_end */
+    2:  r3 = *(u32 *)(r1 +76)  /* load skb->data */
+    3:  r5 = r3
+    4:  r5 += 14
+    5:  if r5 > r4 goto pc+16
+    R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp
+    6:  r0 = *(u16 *)(r3 +12) /* access 12 and 13 bytes of the packet */
+
+this 2byte load from the packet is safe to do, since the program author
+did check ``if (skb->data + 14 > skb->data_end) goto err`` at insn #5 which
+means that in the fall-through case the register R3 (which points to skb->data)
+has at least 14 directly accessible bytes. The verifier marks it
+as R3=pkt(id=0,off=0,r=14).
+id=0 means that no additional variables were added to the register.
+off=0 means that no additional constants were added.
+r=14 is the range of safe access which means that bytes [R3, R3 + 14) are ok.
+Note that R5 is marked as R5=pkt(id=0,off=14,r=14). It also points
+to the packet data, but constant 14 was added to the register, so
+it now points to ``skb->data + 14`` and accessible range is [R5, R5 + 14 - 14)
+which is zero bytes.
+
+More complex packet access may look like::
+
+
+    R0=inv1 R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp
+    6:  r0 = *(u8 *)(r3 +7) /* load 7th byte from the packet */
+    7:  r4 = *(u8 *)(r3 +12)
+    8:  r4 *= 14
+    9:  r3 = *(u32 *)(r1 +76) /* load skb->data */
+    10:  r3 += r4
+    11:  r2 = r1
+    12:  r2 <<= 48
+    13:  r2 >>= 48
+    14:  r3 += r2
+    15:  r2 = r3
+    16:  r2 += 8
+    17:  r1 = *(u32 *)(r1 +80) /* load skb->data_end */
+    18:  if r2 > r1 goto pc+2
+    R0=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=pkt_end R2=pkt(id=2,off=8,r=8) R3=pkt(id=2,off=0,r=8) R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)) R5=pkt(id=0,off=14,r=14) R10=fp
+    19:  r1 = *(u8 *)(r3 +4)
+
+The state of the register R3 is R3=pkt(id=2,off=0,r=8)
+id=2 means that two ``r3 += rX`` instructions were seen, so r3 points to some
+offset within a packet and since the program author did
+``if (r3 + 8 > r1) goto err`` at insn #18, the safe range is [R3, R3 + 8).
+The verifier only allows 'add'/'sub' operations on packet registers. Any other
+operation will set the register state to 'SCALAR_VALUE' and it won't be
+available for direct packet access.
+
+Operation ``r3 += rX`` may overflow and become less than original skb->data,
+therefore the verifier has to prevent that.  So when it sees ``r3 += rX``
+instruction and rX is more than 16-bit value, any subsequent bounds-check of r3
+against skb->data_end will not give us 'range' information, so attempts to read
+through the pointer will give "invalid access to packet" error.
+
+Ex. after insn ``r4 = *(u8 *)(r3 +12)`` (insn #7 above) the state of r4 is
+R4=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) which means that upper 56 bits
+of the register are guaranteed to be zero, and nothing is known about the lower
+8 bits. After insn ``r4 *= 14`` the state becomes
+R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)), since multiplying an 8-bit
+value by constant 14 will keep upper 52 bits as zero, also the least significant
+bit will be zero as 14 is even.  Similarly ``r2 >>= 48`` will make
+R2=inv(id=0,umax_value=65535,var_off=(0x0; 0xffff)), since the shift is not sign
+extending.  This logic is implemented in adjust_reg_min_max_vals() function,
+which calls adjust_ptr_min_max_vals() for adding pointer to scalar (or vice
+versa) and adjust_scalar_min_max_vals() for operations on two scalars.
+
+The end result is that bpf program author can access packet directly
+using normal C code as::
+
+  void *data = (void *)(long)skb->data;
+  void *data_end = (void *)(long)skb->data_end;
+  struct eth_hdr *eth = data;
+  struct iphdr *iph = data + sizeof(*eth);
+  struct udphdr *udp = data + sizeof(*eth) + sizeof(*iph);
+
+  if (data + sizeof(*eth) + sizeof(*iph) + sizeof(*udp) > data_end)
+	  return 0;
+  if (eth->h_proto != htons(ETH_P_IP))
+	  return 0;
+  if (iph->protocol != IPPROTO_UDP || iph->ihl != 5)
+	  return 0;
+  if (udp->dest == 53 || udp->source == 9)
+	  ...;
+
+which makes such programs easier to write comparing to LD_ABS insn
+and significantly faster.
+
+eBPF maps
+---------
+'maps' is a generic storage of different types for sharing data between kernel
+and userspace.
+
+The maps are accessed from user space via BPF syscall, which has commands:
+
+- create a map with given type and attributes
+  ``map_fd = bpf(BPF_MAP_CREATE, union bpf_attr *attr, u32 size)``
+  using attr->map_type, attr->key_size, attr->value_size, attr->max_entries
+  returns process-local file descriptor or negative error
+
+- lookup key in a given map
+  ``err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size)``
+  using attr->map_fd, attr->key, attr->value
+  returns zero and stores found elem into value or negative error
+
+- create or update key/value pair in a given map
+  ``err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size)``
+  using attr->map_fd, attr->key, attr->value
+  returns zero or negative error
+
+- find and delete element by key in a given map
+  ``err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size)``
+  using attr->map_fd, attr->key
+
+- to delete map: close(fd)
+  Exiting process will delete maps automatically
+
+userspace programs use this syscall to create/access maps that eBPF programs
+are concurrently updating.
+
+maps can have different types: hash, array, bloom filter, radix-tree, etc.
+
+The map is defined by:
+
+  - type
+  - max number of elements
+  - key size in bytes
+  - value size in bytes
+
+Pruning
+-------
+The verifier does not actually walk all possible paths through the program.  For
+each new branch to analyse, the verifier looks at all the states it's previously
+been in when at this instruction.  If any of them contain the current state as a
+subset, the branch is 'pruned' - that is, the fact that the previous state was
+accepted implies the current state would be as well.  For instance, if in the
+previous state, r1 held a packet-pointer, and in the current state, r1 holds a
+packet-pointer with a range as long or longer and at least as strict an
+alignment, then r1 is safe.  Similarly, if r2 was NOT_INIT before then it can't
+have been used by any path from that point, so any value in r2 (including
+another NOT_INIT) is safe.  The implementation is in the function regsafe().
+Pruning considers not only the registers but also the stack (and any spilled
+registers it may hold).  They must all be safe for the branch to be pruned.
+This is implemented in states_equal().
+
+Understanding eBPF verifier messages
+------------------------------------
+
+The following are few examples of invalid eBPF programs and verifier error
+messages as seen in the log:
+
+Program with unreachable instructions::
+
+  static struct bpf_insn prog[] = {
+  BPF_EXIT_INSN(),
+  BPF_EXIT_INSN(),
+  };
+
+Error:
+
+  unreachable insn 1
+
+Program that reads uninitialized register::
+
+  BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (bf) r0 = r2
+  R2 !read_ok
+
+Program that doesn't initialize R0 before exiting::
+
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_1),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (bf) r2 = r1
+  1: (95) exit
+  R0 !read_ok
+
+Program that accesses stack out of bounds::
+
+    BPF_ST_MEM(BPF_DW, BPF_REG_10, 8, 0),
+    BPF_EXIT_INSN(),
+
+Error::
+
+    0: (7a) *(u64 *)(r10 +8) = 0
+    invalid stack off=8 size=8
+
+Program that doesn't initialize stack before passing its address into function::
+
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (bf) r2 = r10
+  1: (07) r2 += -8
+  2: (b7) r1 = 0x0
+  3: (85) call 1
+  invalid indirect read from stack off -8+0 size 8
+
+Program that uses invalid map_fd=0 while calling to map_lookup_elem() function::
+
+  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (7a) *(u64 *)(r10 -8) = 0
+  1: (bf) r2 = r10
+  2: (07) r2 += -8
+  3: (b7) r1 = 0x0
+  4: (85) call 1
+  fd 0 is not pointing to valid bpf_map
+
+Program that doesn't check return value of map_lookup_elem() before accessing
+map element::
+
+  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (7a) *(u64 *)(r10 -8) = 0
+  1: (bf) r2 = r10
+  2: (07) r2 += -8
+  3: (b7) r1 = 0x0
+  4: (85) call 1
+  5: (7a) *(u64 *)(r0 +0) = 0
+  R0 invalid mem access 'map_value_or_null'
+
+Program that correctly checks map_lookup_elem() returned value for NULL, but
+accesses the memory with incorrect alignment::
+
+  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1),
+  BPF_ST_MEM(BPF_DW, BPF_REG_0, 4, 0),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (7a) *(u64 *)(r10 -8) = 0
+  1: (bf) r2 = r10
+  2: (07) r2 += -8
+  3: (b7) r1 = 1
+  4: (85) call 1
+  5: (15) if r0 == 0x0 goto pc+1
+   R0=map_ptr R10=fp
+  6: (7a) *(u64 *)(r0 +4) = 0
+  misaligned access off 4 size 8
+
+Program that correctly checks map_lookup_elem() returned value for NULL and
+accesses memory with correct alignment in one side of 'if' branch, but fails
+to do so in the other side of 'if' branch::
+
+  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2),
+  BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0),
+  BPF_EXIT_INSN(),
+  BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 1),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (7a) *(u64 *)(r10 -8) = 0
+  1: (bf) r2 = r10
+  2: (07) r2 += -8
+  3: (b7) r1 = 1
+  4: (85) call 1
+  5: (15) if r0 == 0x0 goto pc+2
+   R0=map_ptr R10=fp
+  6: (7a) *(u64 *)(r0 +0) = 0
+  7: (95) exit
+
+  from 5 to 8: R0=imm0 R10=fp
+  8: (7a) *(u64 *)(r0 +0) = 1
+  R0 invalid mem access 'imm'
+
+Program that performs a socket lookup then sets the pointer to NULL without
+checking it::
+
+  BPF_MOV64_IMM(BPF_REG_2, 0),
+  BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_MOV64_IMM(BPF_REG_3, 4),
+  BPF_MOV64_IMM(BPF_REG_4, 0),
+  BPF_MOV64_IMM(BPF_REG_5, 0),
+  BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp),
+  BPF_MOV64_IMM(BPF_REG_0, 0),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (b7) r2 = 0
+  1: (63) *(u32 *)(r10 -8) = r2
+  2: (bf) r2 = r10
+  3: (07) r2 += -8
+  4: (b7) r3 = 4
+  5: (b7) r4 = 0
+  6: (b7) r5 = 0
+  7: (85) call bpf_sk_lookup_tcp#65
+  8: (b7) r0 = 0
+  9: (95) exit
+  Unreleased reference id=1, alloc_insn=7
+
+Program that performs a socket lookup but does not NULL-check the returned
+value::
+
+  BPF_MOV64_IMM(BPF_REG_2, 0),
+  BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_MOV64_IMM(BPF_REG_3, 4),
+  BPF_MOV64_IMM(BPF_REG_4, 0),
+  BPF_MOV64_IMM(BPF_REG_5, 0),
+  BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (b7) r2 = 0
+  1: (63) *(u32 *)(r10 -8) = r2
+  2: (bf) r2 = r10
+  3: (07) r2 += -8
+  4: (b7) r3 = 4
+  5: (b7) r4 = 0
+  6: (b7) r5 = 0
+  7: (85) call bpf_sk_lookup_tcp#65
+  8: (95) exit
+  Unreleased reference id=1, alloc_insn=7
+
+Testing
+-------
+
+Next to the BPF toolchain, the kernel also ships a test module that contains
+various test cases for classic and internal BPF that can be executed against
+the BPF interpreter and JIT compiler. It can be found in lib/test_bpf.c and
+enabled via Kconfig::
+
+  CONFIG_TEST_BPF=m
+
+After the module has been built and installed, the test suite can be executed
+via insmod or modprobe against 'test_bpf' module. Results of the test cases
+including timings in nsec can be found in the kernel log (dmesg).
+
+Misc
+----
+
+Also trinity, the Linux syscall fuzzer, has built-in support for BPF and
+SECCOMP-BPF kernel fuzzing.
+
+Written by
+----------
+
+The document was written in the hope that it is found useful and in order
+to give potential BPF hackers or security auditors a better overview of
+the underlying architecture.
+
+- Jay Schulist <jschlst@samba.org>
+- Daniel Borkmann <daniel@iogearbox.net>
+- Alexei Starovoitov <ast@kernel.org>
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
deleted file mode 100644
index 2f0f8b17dade..000000000000
--- a/Documentation/networking/filter.txt
+++ /dev/null
@@ -1,1545 +0,0 @@
-Linux Socket Filtering aka Berkeley Packet Filter (BPF)
-=======================================================
-
-Introduction
-------------
-
-Linux Socket Filtering (LSF) is derived from the Berkeley Packet Filter.
-Though there are some distinct differences between the BSD and Linux
-Kernel filtering, but when we speak of BPF or LSF in Linux context, we
-mean the very same mechanism of filtering in the Linux kernel.
-
-BPF allows a user-space program to attach a filter onto any socket and
-allow or disallow certain types of data to come through the socket. LSF
-follows exactly the same filter code structure as BSD's BPF, so referring
-to the BSD bpf.4 manpage is very helpful in creating filters.
-
-On Linux, BPF is much simpler than on BSD. One does not have to worry
-about devices or anything like that. You simply create your filter code,
-send it to the kernel via the SO_ATTACH_FILTER option and if your filter
-code passes the kernel check on it, you then immediately begin filtering
-data on that socket.
-
-You can also detach filters from your socket via the SO_DETACH_FILTER
-option. This will probably not be used much since when you close a socket
-that has a filter on it the filter is automagically removed. The other
-less common case may be adding a different filter on the same socket where
-you had another filter that is still running: the kernel takes care of
-removing the old one and placing your new one in its place, assuming your
-filter has passed the checks, otherwise if it fails the old filter will
-remain on that socket.
-
-SO_LOCK_FILTER option allows to lock the filter attached to a socket. Once
-set, a filter cannot be removed or changed. This allows one process to
-setup a socket, attach a filter, lock it then drop privileges and be
-assured that the filter will be kept until the socket is closed.
-
-The biggest user of this construct might be libpcap. Issuing a high-level
-filter command like `tcpdump -i em1 port 22` passes through the libpcap
-internal compiler that generates a structure that can eventually be loaded
-via SO_ATTACH_FILTER to the kernel. `tcpdump -i em1 port 22 -ddd`
-displays what is being placed into this structure.
-
-Although we were only speaking about sockets here, BPF in Linux is used
-in many more places. There's xt_bpf for netfilter, cls_bpf in the kernel
-qdisc layer, SECCOMP-BPF (SECure COMPuting [1]), and lots of other places
-such as team driver, PTP code, etc where BPF is being used.
-
- [1] Documentation/userspace-api/seccomp_filter.rst
-
-Original BPF paper:
-
-Steven McCanne and Van Jacobson. 1993. The BSD packet filter: a new
-architecture for user-level packet capture. In Proceedings of the
-USENIX Winter 1993 Conference Proceedings on USENIX Winter 1993
-Conference Proceedings (USENIX'93). USENIX Association, Berkeley,
-CA, USA, 2-2. [http://www.tcpdump.org/papers/bpf-usenix93.pdf]
-
-Structure
----------
-
-User space applications include <linux/filter.h> which contains the
-following relevant structures:
-
-struct sock_filter {	/* Filter block */
-	__u16	code;   /* Actual filter code */
-	__u8	jt;	/* Jump true */
-	__u8	jf;	/* Jump false */
-	__u32	k;      /* Generic multiuse field */
-};
-
-Such a structure is assembled as an array of 4-tuples, that contains
-a code, jt, jf and k value. jt and jf are jump offsets and k a generic
-value to be used for a provided code.
-
-struct sock_fprog {			/* Required for SO_ATTACH_FILTER. */
-	unsigned short		   len;	/* Number of filter blocks */
-	struct sock_filter __user *filter;
-};
-
-For socket filtering, a pointer to this structure (as shown in
-follow-up example) is being passed to the kernel through setsockopt(2).
-
-Example
--------
-
-#include <sys/socket.h>
-#include <sys/types.h>
-#include <arpa/inet.h>
-#include <linux/if_ether.h>
-/* ... */
-
-/* From the example above: tcpdump -i em1 port 22 -dd */
-struct sock_filter code[] = {
-	{ 0x28,  0,  0, 0x0000000c },
-	{ 0x15,  0,  8, 0x000086dd },
-	{ 0x30,  0,  0, 0x00000014 },
-	{ 0x15,  2,  0, 0x00000084 },
-	{ 0x15,  1,  0, 0x00000006 },
-	{ 0x15,  0, 17, 0x00000011 },
-	{ 0x28,  0,  0, 0x00000036 },
-	{ 0x15, 14,  0, 0x00000016 },
-	{ 0x28,  0,  0, 0x00000038 },
-	{ 0x15, 12, 13, 0x00000016 },
-	{ 0x15,  0, 12, 0x00000800 },
-	{ 0x30,  0,  0, 0x00000017 },
-	{ 0x15,  2,  0, 0x00000084 },
-	{ 0x15,  1,  0, 0x00000006 },
-	{ 0x15,  0,  8, 0x00000011 },
-	{ 0x28,  0,  0, 0x00000014 },
-	{ 0x45,  6,  0, 0x00001fff },
-	{ 0xb1,  0,  0, 0x0000000e },
-	{ 0x48,  0,  0, 0x0000000e },
-	{ 0x15,  2,  0, 0x00000016 },
-	{ 0x48,  0,  0, 0x00000010 },
-	{ 0x15,  0,  1, 0x00000016 },
-	{ 0x06,  0,  0, 0x0000ffff },
-	{ 0x06,  0,  0, 0x00000000 },
-};
-
-struct sock_fprog bpf = {
-	.len = ARRAY_SIZE(code),
-	.filter = code,
-};
-
-sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
-if (sock < 0)
-	/* ... bail out ... */
-
-ret = setsockopt(sock, SOL_SOCKET, SO_ATTACH_FILTER, &bpf, sizeof(bpf));
-if (ret < 0)
-	/* ... bail out ... */
-
-/* ... */
-close(sock);
-
-The above example code attaches a socket filter for a PF_PACKET socket
-in order to let all IPv4/IPv6 packets with port 22 pass. The rest will
-be dropped for this socket.
-
-The setsockopt(2) call to SO_DETACH_FILTER doesn't need any arguments
-and SO_LOCK_FILTER for preventing the filter to be detached, takes an
-integer value with 0 or 1.
-
-Note that socket filters are not restricted to PF_PACKET sockets only,
-but can also be used on other socket families.
-
-Summary of system calls:
-
- * setsockopt(sockfd, SOL_SOCKET, SO_ATTACH_FILTER, &val, sizeof(val));
- * setsockopt(sockfd, SOL_SOCKET, SO_DETACH_FILTER, &val, sizeof(val));
- * setsockopt(sockfd, SOL_SOCKET, SO_LOCK_FILTER,   &val, sizeof(val));
-
-Normally, most use cases for socket filtering on packet sockets will be
-covered by libpcap in high-level syntax, so as an application developer
-you should stick to that. libpcap wraps its own layer around all that.
-
-Unless i) using/linking to libpcap is not an option, ii) the required BPF
-filters use Linux extensions that are not supported by libpcap's compiler,
-iii) a filter might be more complex and not cleanly implementable with
-libpcap's compiler, or iv) particular filter codes should be optimized
-differently than libpcap's internal compiler does; then in such cases
-writing such a filter "by hand" can be of an alternative. For example,
-xt_bpf and cls_bpf users might have requirements that could result in
-more complex filter code, or one that cannot be expressed with libpcap
-(e.g. different return codes for various code paths). Moreover, BPF JIT
-implementors may wish to manually write test cases and thus need low-level
-access to BPF code as well.
-
-BPF engine and instruction set
-------------------------------
-
-Under tools/bpf/ there's a small helper tool called bpf_asm which can
-be used to write low-level filters for example scenarios mentioned in the
-previous section. Asm-like syntax mentioned here has been implemented in
-bpf_asm and will be used for further explanations (instead of dealing with
-less readable opcodes directly, principles are the same). The syntax is
-closely modelled after Steven McCanne's and Van Jacobson's BPF paper.
-
-The BPF architecture consists of the following basic elements:
-
-  Element          Description
-
-  A                32 bit wide accumulator
-  X                32 bit wide X register
-  M[]              16 x 32 bit wide misc registers aka "scratch memory
-                   store", addressable from 0 to 15
-
-A program, that is translated by bpf_asm into "opcodes" is an array that
-consists of the following elements (as already mentioned):
-
-  op:16, jt:8, jf:8, k:32
-
-The element op is a 16 bit wide opcode that has a particular instruction
-encoded. jt and jf are two 8 bit wide jump targets, one for condition
-"jump if true", the other one "jump if false". Eventually, element k
-contains a miscellaneous argument that can be interpreted in different
-ways depending on the given instruction in op.
-
-The instruction set consists of load, store, branch, alu, miscellaneous
-and return instructions that are also represented in bpf_asm syntax. This
-table lists all bpf_asm instructions available resp. what their underlying
-opcodes as defined in linux/filter.h stand for:
-
-  Instruction      Addressing mode      Description
-
-  ld               1, 2, 3, 4, 12       Load word into A
-  ldi              4                    Load word into A
-  ldh              1, 2                 Load half-word into A
-  ldb              1, 2                 Load byte into A
-  ldx              3, 4, 5, 12          Load word into X
-  ldxi             4                    Load word into X
-  ldxb             5                    Load byte into X
-
-  st               3                    Store A into M[]
-  stx              3                    Store X into M[]
-
-  jmp              6                    Jump to label
-  ja               6                    Jump to label
-  jeq              7, 8, 9, 10          Jump on A == <x>
-  jneq             9, 10                Jump on A != <x>
-  jne              9, 10                Jump on A != <x>
-  jlt              9, 10                Jump on A <  <x>
-  jle              9, 10                Jump on A <= <x>
-  jgt              7, 8, 9, 10          Jump on A >  <x>
-  jge              7, 8, 9, 10          Jump on A >= <x>
-  jset             7, 8, 9, 10          Jump on A &  <x>
-
-  add              0, 4                 A + <x>
-  sub              0, 4                 A - <x>
-  mul              0, 4                 A * <x>
-  div              0, 4                 A / <x>
-  mod              0, 4                 A % <x>
-  neg                                   !A
-  and              0, 4                 A & <x>
-  or               0, 4                 A | <x>
-  xor              0, 4                 A ^ <x>
-  lsh              0, 4                 A << <x>
-  rsh              0, 4                 A >> <x>
-
-  tax                                   Copy A into X
-  txa                                   Copy X into A
-
-  ret              4, 11                Return
-
-The next table shows addressing formats from the 2nd column:
-
-  Addressing mode  Syntax               Description
-
-   0               x/%x                 Register X
-   1               [k]                  BHW at byte offset k in the packet
-   2               [x + k]              BHW at the offset X + k in the packet
-   3               M[k]                 Word at offset k in M[]
-   4               #k                   Literal value stored in k
-   5               4*([k]&0xf)          Lower nibble * 4 at byte offset k in the packet
-   6               L                    Jump label L
-   7               #k,Lt,Lf             Jump to Lt if true, otherwise jump to Lf
-   8               x/%x,Lt,Lf           Jump to Lt if true, otherwise jump to Lf
-   9               #k,Lt                Jump to Lt if predicate is true
-  10               x/%x,Lt              Jump to Lt if predicate is true
-  11               a/%a                 Accumulator A
-  12               extension            BPF extension
-
-The Linux kernel also has a couple of BPF extensions that are used along
-with the class of load instructions by "overloading" the k argument with
-a negative offset + a particular extension offset. The result of such BPF
-extensions are loaded into A.
-
-Possible BPF extensions are shown in the following table:
-
-  Extension                             Description
-
-  len                                   skb->len
-  proto                                 skb->protocol
-  type                                  skb->pkt_type
-  poff                                  Payload start offset
-  ifidx                                 skb->dev->ifindex
-  nla                                   Netlink attribute of type X with offset A
-  nlan                                  Nested Netlink attribute of type X with offset A
-  mark                                  skb->mark
-  queue                                 skb->queue_mapping
-  hatype                                skb->dev->type
-  rxhash                                skb->hash
-  cpu                                   raw_smp_processor_id()
-  vlan_tci                              skb_vlan_tag_get(skb)
-  vlan_avail                            skb_vlan_tag_present(skb)
-  vlan_tpid                             skb->vlan_proto
-  rand                                  prandom_u32()
-
-These extensions can also be prefixed with '#'.
-Examples for low-level BPF:
-
-** ARP packets:
-
-  ldh [12]
-  jne #0x806, drop
-  ret #-1
-  drop: ret #0
-
-** IPv4 TCP packets:
-
-  ldh [12]
-  jne #0x800, drop
-  ldb [23]
-  jneq #6, drop
-  ret #-1
-  drop: ret #0
-
-** (Accelerated) VLAN w/ id 10:
-
-  ld vlan_tci
-  jneq #10, drop
-  ret #-1
-  drop: ret #0
-
-** icmp random packet sampling, 1 in 4
-  ldh [12]
-  jne #0x800, drop
-  ldb [23]
-  jneq #1, drop
-  # get a random uint32 number
-  ld rand
-  mod #4
-  jneq #1, drop
-  ret #-1
-  drop: ret #0
-
-** SECCOMP filter example:
-
-  ld [4]                  /* offsetof(struct seccomp_data, arch) */
-  jne #0xc000003e, bad    /* AUDIT_ARCH_X86_64 */
-  ld [0]                  /* offsetof(struct seccomp_data, nr) */
-  jeq #15, good           /* __NR_rt_sigreturn */
-  jeq #231, good          /* __NR_exit_group */
-  jeq #60, good           /* __NR_exit */
-  jeq #0, good            /* __NR_read */
-  jeq #1, good            /* __NR_write */
-  jeq #5, good            /* __NR_fstat */
-  jeq #9, good            /* __NR_mmap */
-  jeq #14, good           /* __NR_rt_sigprocmask */
-  jeq #13, good           /* __NR_rt_sigaction */
-  jeq #35, good           /* __NR_nanosleep */
-  bad: ret #0             /* SECCOMP_RET_KILL_THREAD */
-  good: ret #0x7fff0000   /* SECCOMP_RET_ALLOW */
-
-The above example code can be placed into a file (here called "foo"), and
-then be passed to the bpf_asm tool for generating opcodes, output that xt_bpf
-and cls_bpf understands and can directly be loaded with. Example with above
-ARP code:
-
-$ ./bpf_asm foo
-4,40 0 0 12,21 0 1 2054,6 0 0 4294967295,6 0 0 0,
-
-In copy and paste C-like output:
-
-$ ./bpf_asm -c foo
-{ 0x28,  0,  0, 0x0000000c },
-{ 0x15,  0,  1, 0x00000806 },
-{ 0x06,  0,  0, 0xffffffff },
-{ 0x06,  0,  0, 0000000000 },
-
-In particular, as usage with xt_bpf or cls_bpf can result in more complex BPF
-filters that might not be obvious at first, it's good to test filters before
-attaching to a live system. For that purpose, there's a small tool called
-bpf_dbg under tools/bpf/ in the kernel source directory. This debugger allows
-for testing BPF filters against given pcap files, single stepping through the
-BPF code on the pcap's packets and to do BPF machine register dumps.
-
-Starting bpf_dbg is trivial and just requires issuing:
-
-# ./bpf_dbg
-
-In case input and output do not equal stdin/stdout, bpf_dbg takes an
-alternative stdin source as a first argument, and an alternative stdout
-sink as a second one, e.g. `./bpf_dbg test_in.txt test_out.txt`.
-
-Other than that, a particular libreadline configuration can be set via
-file "~/.bpf_dbg_init" and the command history is stored in the file
-"~/.bpf_dbg_history".
-
-Interaction in bpf_dbg happens through a shell that also has auto-completion
-support (follow-up example commands starting with '>' denote bpf_dbg shell).
-The usual workflow would be to ...
-
-> load bpf 6,40 0 0 12,21 0 3 2048,48 0 0 23,21 0 1 1,6 0 0 65535,6 0 0 0
-  Loads a BPF filter from standard output of bpf_asm, or transformed via
-  e.g. `tcpdump -iem1 -ddd port 22 | tr '\n' ','`. Note that for JIT
-  debugging (next section), this command creates a temporary socket and
-  loads the BPF code into the kernel. Thus, this will also be useful for
-  JIT developers.
-
-> load pcap foo.pcap
-  Loads standard tcpdump pcap file.
-
-> run [<n>]
-bpf passes:1 fails:9
-  Runs through all packets from a pcap to account how many passes and fails
-  the filter will generate. A limit of packets to traverse can be given.
-
-> disassemble
-l0:	ldh [12]
-l1:	jeq #0x800, l2, l5
-l2:	ldb [23]
-l3:	jeq #0x1, l4, l5
-l4:	ret #0xffff
-l5:	ret #0
-  Prints out BPF code disassembly.
-
-> dump
-/* { op, jt, jf, k }, */
-{ 0x28,  0,  0, 0x0000000c },
-{ 0x15,  0,  3, 0x00000800 },
-{ 0x30,  0,  0, 0x00000017 },
-{ 0x15,  0,  1, 0x00000001 },
-{ 0x06,  0,  0, 0x0000ffff },
-{ 0x06,  0,  0, 0000000000 },
-  Prints out C-style BPF code dump.
-
-> breakpoint 0
-breakpoint at: l0:	ldh [12]
-> breakpoint 1
-breakpoint at: l1:	jeq #0x800, l2, l5
-  ...
-  Sets breakpoints at particular BPF instructions. Issuing a `run` command
-  will walk through the pcap file continuing from the current packet and
-  break when a breakpoint is being hit (another `run` will continue from
-  the currently active breakpoint executing next instructions):
-
-  > run
-  -- register dump --
-  pc:       [0]                       <-- program counter
-  code:     [40] jt[0] jf[0] k[12]    <-- plain BPF code of current instruction
-  curr:     l0:	ldh [12]              <-- disassembly of current instruction
-  A:        [00000000][0]             <-- content of A (hex, decimal)
-  X:        [00000000][0]             <-- content of X (hex, decimal)
-  M[0,15]:  [00000000][0]             <-- folded content of M (hex, decimal)
-  -- packet dump --                   <-- Current packet from pcap (hex)
-  len: 42
-    0: 00 19 cb 55 55 a4 00 14 a4 43 78 69 08 06 00 01
-   16: 08 00 06 04 00 01 00 14 a4 43 78 69 0a 3b 01 26
-   32: 00 00 00 00 00 00 0a 3b 01 01
-  (breakpoint)
-  >
-
-> breakpoint
-breakpoints: 0 1
-  Prints currently set breakpoints.
-
-> step [-<n>, +<n>]
-  Performs single stepping through the BPF program from the current pc
-  offset. Thus, on each step invocation, above register dump is issued.
-  This can go forwards and backwards in time, a plain `step` will break
-  on the next BPF instruction, thus +1. (No `run` needs to be issued here.)
-
-> select <n>
-  Selects a given packet from the pcap file to continue from. Thus, on
-  the next `run` or `step`, the BPF program is being evaluated against
-  the user pre-selected packet. Numbering starts just as in Wireshark
-  with index 1.
-
-> quit
-#
-  Exits bpf_dbg.
-
-JIT compiler
-------------
-
-The Linux kernel has a built-in BPF JIT compiler for x86_64, SPARC,
-PowerPC, ARM, ARM64, MIPS, RISC-V and s390 and can be enabled through
-CONFIG_BPF_JIT. The JIT compiler is transparently invoked for each
-attached filter from user space or for internal kernel users if it has
-been previously enabled by root:
-
-  echo 1 > /proc/sys/net/core/bpf_jit_enable
-
-For JIT developers, doing audits etc, each compile run can output the generated
-opcode image into the kernel log via:
-
-  echo 2 > /proc/sys/net/core/bpf_jit_enable
-
-Example output from dmesg:
-
-[ 3389.935842] flen=6 proglen=70 pass=3 image=ffffffffa0069c8f
-[ 3389.935847] JIT code: 00000000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 68
-[ 3389.935849] JIT code: 00000010: 44 2b 4f 6c 4c 8b 87 d8 00 00 00 be 0c 00 00 00
-[ 3389.935850] JIT code: 00000020: e8 1d 94 ff e0 3d 00 08 00 00 75 16 be 17 00 00
-[ 3389.935851] JIT code: 00000030: 00 e8 28 94 ff e0 83 f8 01 75 07 b8 ff ff 00 00
-[ 3389.935852] JIT code: 00000040: eb 02 31 c0 c9 c3
-
-When CONFIG_BPF_JIT_ALWAYS_ON is enabled, bpf_jit_enable is permanently set to 1 and
-setting any other value than that will return in failure. This is even the case for
-setting bpf_jit_enable to 2, since dumping the final JIT image into the kernel log
-is discouraged and introspection through bpftool (under tools/bpf/bpftool/) is the
-generally recommended approach instead.
-
-In the kernel source tree under tools/bpf/, there's bpf_jit_disasm for
-generating disassembly out of the kernel log's hexdump:
-
-# ./bpf_jit_disasm
-70 bytes emitted from JIT compiler (pass:3, flen:6)
-ffffffffa0069c8f + <x>:
-   0:	push   %rbp
-   1:	mov    %rsp,%rbp
-   4:	sub    $0x60,%rsp
-   8:	mov    %rbx,-0x8(%rbp)
-   c:	mov    0x68(%rdi),%r9d
-  10:	sub    0x6c(%rdi),%r9d
-  14:	mov    0xd8(%rdi),%r8
-  1b:	mov    $0xc,%esi
-  20:	callq  0xffffffffe0ff9442
-  25:	cmp    $0x800,%eax
-  2a:	jne    0x0000000000000042
-  2c:	mov    $0x17,%esi
-  31:	callq  0xffffffffe0ff945e
-  36:	cmp    $0x1,%eax
-  39:	jne    0x0000000000000042
-  3b:	mov    $0xffff,%eax
-  40:	jmp    0x0000000000000044
-  42:	xor    %eax,%eax
-  44:	leaveq
-  45:	retq
-
-Issuing option `-o` will "annotate" opcodes to resulting assembler
-instructions, which can be very useful for JIT developers:
-
-# ./bpf_jit_disasm -o
-70 bytes emitted from JIT compiler (pass:3, flen:6)
-ffffffffa0069c8f + <x>:
-   0:	push   %rbp
-	55
-   1:	mov    %rsp,%rbp
-	48 89 e5
-   4:	sub    $0x60,%rsp
-	48 83 ec 60
-   8:	mov    %rbx,-0x8(%rbp)
-	48 89 5d f8
-   c:	mov    0x68(%rdi),%r9d
-	44 8b 4f 68
-  10:	sub    0x6c(%rdi),%r9d
-	44 2b 4f 6c
-  14:	mov    0xd8(%rdi),%r8
-	4c 8b 87 d8 00 00 00
-  1b:	mov    $0xc,%esi
-	be 0c 00 00 00
-  20:	callq  0xffffffffe0ff9442
-	e8 1d 94 ff e0
-  25:	cmp    $0x800,%eax
-	3d 00 08 00 00
-  2a:	jne    0x0000000000000042
-	75 16
-  2c:	mov    $0x17,%esi
-	be 17 00 00 00
-  31:	callq  0xffffffffe0ff945e
-	e8 28 94 ff e0
-  36:	cmp    $0x1,%eax
-	83 f8 01
-  39:	jne    0x0000000000000042
-	75 07
-  3b:	mov    $0xffff,%eax
-	b8 ff ff 00 00
-  40:	jmp    0x0000000000000044
-	eb 02
-  42:	xor    %eax,%eax
-	31 c0
-  44:	leaveq
-	c9
-  45:	retq
-	c3
-
-For BPF JIT developers, bpf_jit_disasm, bpf_asm and bpf_dbg provides a useful
-toolchain for developing and testing the kernel's JIT compiler.
-
-BPF kernel internals
---------------------
-Internally, for the kernel interpreter, a different instruction set
-format with similar underlying principles from BPF described in previous
-paragraphs is being used. However, the instruction set format is modelled
-closer to the underlying architecture to mimic native instruction sets, so
-that a better performance can be achieved (more details later). This new
-ISA is called 'eBPF' or 'internal BPF' interchangeably. (Note: eBPF which
-originates from [e]xtended BPF is not the same as BPF extensions! While
-eBPF is an ISA, BPF extensions date back to classic BPF's 'overloading'
-of BPF_LD | BPF_{B,H,W} | BPF_ABS instruction.)
-
-It is designed to be JITed with one to one mapping, which can also open up
-the possibility for GCC/LLVM compilers to generate optimized eBPF code through
-an eBPF backend that performs almost as fast as natively compiled code.
-
-The new instruction set was originally designed with the possible goal in
-mind to write programs in "restricted C" and compile into eBPF with a optional
-GCC/LLVM backend, so that it can just-in-time map to modern 64-bit CPUs with
-minimal performance overhead over two steps, that is, C -> eBPF -> native code.
-
-Currently, the new format is being used for running user BPF programs, which
-includes seccomp BPF, classic socket filters, cls_bpf traffic classifier,
-team driver's classifier for its load-balancing mode, netfilter's xt_bpf
-extension, PTP dissector/classifier, and much more. They are all internally
-converted by the kernel into the new instruction set representation and run
-in the eBPF interpreter. For in-kernel handlers, this all works transparently
-by using bpf_prog_create() for setting up the filter, resp.
-bpf_prog_destroy() for destroying it. The macro
-BPF_PROG_RUN(filter, ctx) transparently invokes eBPF interpreter or JITed
-code to run the filter. 'filter' is a pointer to struct bpf_prog that we
-got from bpf_prog_create(), and 'ctx' the given context (e.g.
-skb pointer). All constraints and restrictions from bpf_check_classic() apply
-before a conversion to the new layout is being done behind the scenes!
-
-Currently, the classic BPF format is being used for JITing on most
-32-bit architectures, whereas x86-64, aarch64, s390x, powerpc64,
-sparc64, arm32, riscv64, riscv32 perform JIT compilation from eBPF
-instruction set.
-
-Some core changes of the new internal format:
-
-- Number of registers increase from 2 to 10:
-
-  The old format had two registers A and X, and a hidden frame pointer. The
-  new layout extends this to be 10 internal registers and a read-only frame
-  pointer. Since 64-bit CPUs are passing arguments to functions via registers
-  the number of args from eBPF program to in-kernel function is restricted
-  to 5 and one register is used to accept return value from an in-kernel
-  function. Natively, x86_64 passes first 6 arguments in registers, aarch64/
-  sparcv9/mips64 have 7 - 8 registers for arguments; x86_64 has 6 callee saved
-  registers, and aarch64/sparcv9/mips64 have 11 or more callee saved registers.
-
-  Therefore, eBPF calling convention is defined as:
-
-    * R0	- return value from in-kernel function, and exit value for eBPF program
-    * R1 - R5	- arguments from eBPF program to in-kernel function
-    * R6 - R9	- callee saved registers that in-kernel function will preserve
-    * R10	- read-only frame pointer to access stack
-
-  Thus, all eBPF registers map one to one to HW registers on x86_64, aarch64,
-  etc, and eBPF calling convention maps directly to ABIs used by the kernel on
-  64-bit architectures.
-
-  On 32-bit architectures JIT may map programs that use only 32-bit arithmetic
-  and may let more complex programs to be interpreted.
-
-  R0 - R5 are scratch registers and eBPF program needs spill/fill them if
-  necessary across calls. Note that there is only one eBPF program (== one
-  eBPF main routine) and it cannot call other eBPF functions, it can only
-  call predefined in-kernel functions, though.
-
-- Register width increases from 32-bit to 64-bit:
-
-  Still, the semantics of the original 32-bit ALU operations are preserved
-  via 32-bit subregisters. All eBPF registers are 64-bit with 32-bit lower
-  subregisters that zero-extend into 64-bit if they are being written to.
-  That behavior maps directly to x86_64 and arm64 subregister definition, but
-  makes other JITs more difficult.
-
-  32-bit architectures run 64-bit internal BPF programs via interpreter.
-  Their JITs may convert BPF programs that only use 32-bit subregisters into
-  native instruction set and let the rest being interpreted.
-
-  Operation is 64-bit, because on 64-bit architectures, pointers are also
-  64-bit wide, and we want to pass 64-bit values in/out of kernel functions,
-  so 32-bit eBPF registers would otherwise require to define register-pair
-  ABI, thus, there won't be able to use a direct eBPF register to HW register
-  mapping and JIT would need to do combine/split/move operations for every
-  register in and out of the function, which is complex, bug prone and slow.
-  Another reason is the use of atomic 64-bit counters.
-
-- Conditional jt/jf targets replaced with jt/fall-through:
-
-  While the original design has constructs such as "if (cond) jump_true;
-  else jump_false;", they are being replaced into alternative constructs like
-  "if (cond) jump_true; /* else fall-through */".
-
-- Introduces bpf_call insn and register passing convention for zero overhead
-  calls from/to other kernel functions:
-
-  Before an in-kernel function call, the internal BPF program needs to
-  place function arguments into R1 to R5 registers to satisfy calling
-  convention, then the interpreter will take them from registers and pass
-  to in-kernel function. If R1 - R5 registers are mapped to CPU registers
-  that are used for argument passing on given architecture, the JIT compiler
-  doesn't need to emit extra moves. Function arguments will be in the correct
-  registers and BPF_CALL instruction will be JITed as single 'call' HW
-  instruction. This calling convention was picked to cover common call
-  situations without performance penalty.
-
-  After an in-kernel function call, R1 - R5 are reset to unreadable and R0 has
-  a return value of the function. Since R6 - R9 are callee saved, their state
-  is preserved across the call.
-
-  For example, consider three C functions:
-
-  u64 f1() { return (*_f2)(1); }
-  u64 f2(u64 a) { return f3(a + 1, a); }
-  u64 f3(u64 a, u64 b) { return a - b; }
-
-  GCC can compile f1, f3 into x86_64:
-
-  f1:
-    movl $1, %edi
-    movq _f2(%rip), %rax
-    jmp  *%rax
-  f3:
-    movq %rdi, %rax
-    subq %rsi, %rax
-    ret
-
-  Function f2 in eBPF may look like:
-
-  f2:
-    bpf_mov R2, R1
-    bpf_add R1, 1
-    bpf_call f3
-    bpf_exit
-
-  If f2 is JITed and the pointer stored to '_f2'. The calls f1 -> f2 -> f3 and
-  returns will be seamless. Without JIT, __bpf_prog_run() interpreter needs to
-  be used to call into f2.
-
-  For practical reasons all eBPF programs have only one argument 'ctx' which is
-  already placed into R1 (e.g. on __bpf_prog_run() startup) and the programs
-  can call kernel functions with up to 5 arguments. Calls with 6 or more arguments
-  are currently not supported, but these restrictions can be lifted if necessary
-  in the future.
-
-  On 64-bit architectures all register map to HW registers one to one. For
-  example, x86_64 JIT compiler can map them as ...
-
-    R0 - rax
-    R1 - rdi
-    R2 - rsi
-    R3 - rdx
-    R4 - rcx
-    R5 - r8
-    R6 - rbx
-    R7 - r13
-    R8 - r14
-    R9 - r15
-    R10 - rbp
-
-  ... since x86_64 ABI mandates rdi, rsi, rdx, rcx, r8, r9 for argument passing
-  and rbx, r12 - r15 are callee saved.
-
-  Then the following internal BPF pseudo-program:
-
-    bpf_mov R6, R1 /* save ctx */
-    bpf_mov R2, 2
-    bpf_mov R3, 3
-    bpf_mov R4, 4
-    bpf_mov R5, 5
-    bpf_call foo
-    bpf_mov R7, R0 /* save foo() return value */
-    bpf_mov R1, R6 /* restore ctx for next call */
-    bpf_mov R2, 6
-    bpf_mov R3, 7
-    bpf_mov R4, 8
-    bpf_mov R5, 9
-    bpf_call bar
-    bpf_add R0, R7
-    bpf_exit
-
-  After JIT to x86_64 may look like:
-
-    push %rbp
-    mov %rsp,%rbp
-    sub $0x228,%rsp
-    mov %rbx,-0x228(%rbp)
-    mov %r13,-0x220(%rbp)
-    mov %rdi,%rbx
-    mov $0x2,%esi
-    mov $0x3,%edx
-    mov $0x4,%ecx
-    mov $0x5,%r8d
-    callq foo
-    mov %rax,%r13
-    mov %rbx,%rdi
-    mov $0x6,%esi
-    mov $0x7,%edx
-    mov $0x8,%ecx
-    mov $0x9,%r8d
-    callq bar
-    add %r13,%rax
-    mov -0x228(%rbp),%rbx
-    mov -0x220(%rbp),%r13
-    leaveq
-    retq
-
-  Which is in this example equivalent in C to:
-
-    u64 bpf_filter(u64 ctx)
-    {
-        return foo(ctx, 2, 3, 4, 5) + bar(ctx, 6, 7, 8, 9);
-    }
-
-  In-kernel functions foo() and bar() with prototype: u64 (*)(u64 arg1, u64
-  arg2, u64 arg3, u64 arg4, u64 arg5); will receive arguments in proper
-  registers and place their return value into '%rax' which is R0 in eBPF.
-  Prologue and epilogue are emitted by JIT and are implicit in the
-  interpreter. R0-R5 are scratch registers, so eBPF program needs to preserve
-  them across the calls as defined by calling convention.
-
-  For example the following program is invalid:
-
-    bpf_mov R1, 1
-    bpf_call foo
-    bpf_mov R0, R1
-    bpf_exit
-
-  After the call the registers R1-R5 contain junk values and cannot be read.
-  An in-kernel eBPF verifier is used to validate internal BPF programs.
-
-Also in the new design, eBPF is limited to 4096 insns, which means that any
-program will terminate quickly and will only call a fixed number of kernel
-functions. Original BPF and the new format are two operand instructions,
-which helps to do one-to-one mapping between eBPF insn and x86 insn during JIT.
-
-The input context pointer for invoking the interpreter function is generic,
-its content is defined by a specific use case. For seccomp register R1 points
-to seccomp_data, for converted BPF filters R1 points to a skb.
-
-A program, that is translated internally consists of the following elements:
-
-  op:16, jt:8, jf:8, k:32    ==>    op:8, dst_reg:4, src_reg:4, off:16, imm:32
-
-So far 87 internal BPF instructions were implemented. 8-bit 'op' opcode field
-has room for new instructions. Some of them may use 16/24/32 byte encoding. New
-instructions must be multiple of 8 bytes to preserve backward compatibility.
-
-Internal BPF is a general purpose RISC instruction set. Not every register and
-every instruction are used during translation from original BPF to new format.
-For example, socket filters are not using 'exclusive add' instruction, but
-tracing filters may do to maintain counters of events, for example. Register R9
-is not used by socket filters either, but more complex filters may be running
-out of registers and would have to resort to spill/fill to stack.
-
-Internal BPF can be used as a generic assembler for last step performance
-optimizations, socket filters and seccomp are using it as assembler. Tracing
-filters may use it as assembler to generate code from kernel. In kernel usage
-may not be bounded by security considerations, since generated internal BPF code
-may be optimizing internal code path and not being exposed to the user space.
-Safety of internal BPF can come from a verifier (TBD). In such use cases as
-described, it may be used as safe instruction set.
-
-Just like the original BPF, the new format runs within a controlled environment,
-is deterministic and the kernel can easily prove that. The safety of the program
-can be determined in two steps: first step does depth-first-search to disallow
-loops and other CFG validation; second step starts from the first insn and
-descends all possible paths. It simulates execution of every insn and observes
-the state change of registers and stack.
-
-eBPF opcode encoding
---------------------
-
-eBPF is reusing most of the opcode encoding from classic to simplify conversion
-of classic BPF to eBPF. For arithmetic and jump instructions the 8-bit 'code'
-field is divided into three parts:
-
-  +----------------+--------+--------------------+
-  |   4 bits       |  1 bit |   3 bits           |
-  | operation code | source | instruction class  |
-  +----------------+--------+--------------------+
-  (MSB)                                      (LSB)
-
-Three LSB bits store instruction class which is one of:
-
-  Classic BPF classes:    eBPF classes:
-
-  BPF_LD    0x00          BPF_LD    0x00
-  BPF_LDX   0x01          BPF_LDX   0x01
-  BPF_ST    0x02          BPF_ST    0x02
-  BPF_STX   0x03          BPF_STX   0x03
-  BPF_ALU   0x04          BPF_ALU   0x04
-  BPF_JMP   0x05          BPF_JMP   0x05
-  BPF_RET   0x06          BPF_JMP32 0x06
-  BPF_MISC  0x07          BPF_ALU64 0x07
-
-When BPF_CLASS(code) == BPF_ALU or BPF_JMP, 4th bit encodes source operand ...
-
-  BPF_K     0x00
-  BPF_X     0x08
-
- * in classic BPF, this means:
-
-  BPF_SRC(code) == BPF_X - use register X as source operand
-  BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand
-
- * in eBPF, this means:
-
-  BPF_SRC(code) == BPF_X - use 'src_reg' register as source operand
-  BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand
-
-... and four MSB bits store operation code.
-
-If BPF_CLASS(code) == BPF_ALU or BPF_ALU64 [ in eBPF ], BPF_OP(code) is one of:
-
-  BPF_ADD   0x00
-  BPF_SUB   0x10
-  BPF_MUL   0x20
-  BPF_DIV   0x30
-  BPF_OR    0x40
-  BPF_AND   0x50
-  BPF_LSH   0x60
-  BPF_RSH   0x70
-  BPF_NEG   0x80
-  BPF_MOD   0x90
-  BPF_XOR   0xa0
-  BPF_MOV   0xb0  /* eBPF only: mov reg to reg */
-  BPF_ARSH  0xc0  /* eBPF only: sign extending shift right */
-  BPF_END   0xd0  /* eBPF only: endianness conversion */
-
-If BPF_CLASS(code) == BPF_JMP or BPF_JMP32 [ in eBPF ], BPF_OP(code) is one of:
-
-  BPF_JA    0x00  /* BPF_JMP only */
-  BPF_JEQ   0x10
-  BPF_JGT   0x20
-  BPF_JGE   0x30
-  BPF_JSET  0x40
-  BPF_JNE   0x50  /* eBPF only: jump != */
-  BPF_JSGT  0x60  /* eBPF only: signed '>' */
-  BPF_JSGE  0x70  /* eBPF only: signed '>=' */
-  BPF_CALL  0x80  /* eBPF BPF_JMP only: function call */
-  BPF_EXIT  0x90  /* eBPF BPF_JMP only: function return */
-  BPF_JLT   0xa0  /* eBPF only: unsigned '<' */
-  BPF_JLE   0xb0  /* eBPF only: unsigned '<=' */
-  BPF_JSLT  0xc0  /* eBPF only: signed '<' */
-  BPF_JSLE  0xd0  /* eBPF only: signed '<=' */
-
-So BPF_ADD | BPF_X | BPF_ALU means 32-bit addition in both classic BPF
-and eBPF. There are only two registers in classic BPF, so it means A += X.
-In eBPF it means dst_reg = (u32) dst_reg + (u32) src_reg; similarly,
-BPF_XOR | BPF_K | BPF_ALU means A ^= imm32 in classic BPF and analogous
-src_reg = (u32) src_reg ^ (u32) imm32 in eBPF.
-
-Classic BPF is using BPF_MISC class to represent A = X and X = A moves.
-eBPF is using BPF_MOV | BPF_X | BPF_ALU code instead. Since there are no
-BPF_MISC operations in eBPF, the class 7 is used as BPF_ALU64 to mean
-exactly the same operations as BPF_ALU, but with 64-bit wide operands
-instead. So BPF_ADD | BPF_X | BPF_ALU64 means 64-bit addition, i.e.:
-dst_reg = dst_reg + src_reg
-
-Classic BPF wastes the whole BPF_RET class to represent a single 'ret'
-operation. Classic BPF_RET | BPF_K means copy imm32 into return register
-and perform function exit. eBPF is modeled to match CPU, so BPF_JMP | BPF_EXIT
-in eBPF means function exit only. The eBPF program needs to store return
-value into register R0 before doing a BPF_EXIT. Class 6 in eBPF is used as
-BPF_JMP32 to mean exactly the same operations as BPF_JMP, but with 32-bit wide
-operands for the comparisons instead.
-
-For load and store instructions the 8-bit 'code' field is divided as:
-
-  +--------+--------+-------------------+
-  | 3 bits | 2 bits |   3 bits          |
-  |  mode  |  size  | instruction class |
-  +--------+--------+-------------------+
-  (MSB)                             (LSB)
-
-Size modifier is one of ...
-
-  BPF_W   0x00    /* word */
-  BPF_H   0x08    /* half word */
-  BPF_B   0x10    /* byte */
-  BPF_DW  0x18    /* eBPF only, double word */
-
-... which encodes size of load/store operation:
-
- B  - 1 byte
- H  - 2 byte
- W  - 4 byte
- DW - 8 byte (eBPF only)
-
-Mode modifier is one of:
-
-  BPF_IMM  0x00  /* used for 32-bit mov in classic BPF and 64-bit in eBPF */
-  BPF_ABS  0x20
-  BPF_IND  0x40
-  BPF_MEM  0x60
-  BPF_LEN  0x80  /* classic BPF only, reserved in eBPF */
-  BPF_MSH  0xa0  /* classic BPF only, reserved in eBPF */
-  BPF_XADD 0xc0  /* eBPF only, exclusive add */
-
-eBPF has two non-generic instructions: (BPF_ABS | <size> | BPF_LD) and
-(BPF_IND | <size> | BPF_LD) which are used to access packet data.
-
-They had to be carried over from classic to have strong performance of
-socket filters running in eBPF interpreter. These instructions can only
-be used when interpreter context is a pointer to 'struct sk_buff' and
-have seven implicit operands. Register R6 is an implicit input that must
-contain pointer to sk_buff. Register R0 is an implicit output which contains
-the data fetched from the packet. Registers R1-R5 are scratch registers
-and must not be used to store the data across BPF_ABS | BPF_LD or
-BPF_IND | BPF_LD instructions.
-
-These instructions have implicit program exit condition as well. When
-eBPF program is trying to access the data beyond the packet boundary,
-the interpreter will abort the execution of the program. JIT compilers
-therefore must preserve this property. src_reg and imm32 fields are
-explicit inputs to these instructions.
-
-For example:
-
-  BPF_IND | BPF_W | BPF_LD means:
-
-    R0 = ntohl(*(u32 *) (((struct sk_buff *) R6)->data + src_reg + imm32))
-    and R1 - R5 were scratched.
-
-Unlike classic BPF instruction set, eBPF has generic load/store operations:
-
-BPF_MEM | <size> | BPF_STX:  *(size *) (dst_reg + off) = src_reg
-BPF_MEM | <size> | BPF_ST:   *(size *) (dst_reg + off) = imm32
-BPF_MEM | <size> | BPF_LDX:  dst_reg = *(size *) (src_reg + off)
-BPF_XADD | BPF_W  | BPF_STX: lock xadd *(u32 *)(dst_reg + off16) += src_reg
-BPF_XADD | BPF_DW | BPF_STX: lock xadd *(u64 *)(dst_reg + off16) += src_reg
-
-Where size is one of: BPF_B or BPF_H or BPF_W or BPF_DW. Note that 1 and
-2 byte atomic increments are not supported.
-
-eBPF has one 16-byte instruction: BPF_LD | BPF_DW | BPF_IMM which consists
-of two consecutive 'struct bpf_insn' 8-byte blocks and interpreted as single
-instruction that loads 64-bit immediate value into a dst_reg.
-Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads
-32-bit immediate value into a register.
-
-eBPF verifier
--------------
-The safety of the eBPF program is determined in two steps.
-
-First step does DAG check to disallow loops and other CFG validation.
-In particular it will detect programs that have unreachable instructions.
-(though classic BPF checker allows them)
-
-Second step starts from the first insn and descends all possible paths.
-It simulates execution of every insn and observes the state change of
-registers and stack.
-
-At the start of the program the register R1 contains a pointer to context
-and has type PTR_TO_CTX.
-If verifier sees an insn that does R2=R1, then R2 has now type
-PTR_TO_CTX as well and can be used on the right hand side of expression.
-If R1=PTR_TO_CTX and insn is R2=R1+R1, then R2=SCALAR_VALUE,
-since addition of two valid pointers makes invalid pointer.
-(In 'secure' mode verifier will reject any type of pointer arithmetic to make
-sure that kernel addresses don't leak to unprivileged users)
-
-If register was never written to, it's not readable:
-  bpf_mov R0 = R2
-  bpf_exit
-will be rejected, since R2 is unreadable at the start of the program.
-
-After kernel function call, R1-R5 are reset to unreadable and
-R0 has a return type of the function.
-
-Since R6-R9 are callee saved, their state is preserved across the call.
-  bpf_mov R6 = 1
-  bpf_call foo
-  bpf_mov R0 = R6
-  bpf_exit
-is a correct program. If there was R1 instead of R6, it would have
-been rejected.
-
-load/store instructions are allowed only with registers of valid types, which
-are PTR_TO_CTX, PTR_TO_MAP, PTR_TO_STACK. They are bounds and alignment checked.
-For example:
- bpf_mov R1 = 1
- bpf_mov R2 = 2
- bpf_xadd *(u32 *)(R1 + 3) += R2
- bpf_exit
-will be rejected, since R1 doesn't have a valid pointer type at the time of
-execution of instruction bpf_xadd.
-
-At the start R1 type is PTR_TO_CTX (a pointer to generic 'struct bpf_context')
-A callback is used to customize verifier to restrict eBPF program access to only
-certain fields within ctx structure with specified size and alignment.
-
-For example, the following insn:
-  bpf_ld R0 = *(u32 *)(R6 + 8)
-intends to load a word from address R6 + 8 and store it into R0
-If R6=PTR_TO_CTX, via is_valid_access() callback the verifier will know
-that offset 8 of size 4 bytes can be accessed for reading, otherwise
-the verifier will reject the program.
-If R6=PTR_TO_STACK, then access should be aligned and be within
-stack bounds, which are [-MAX_BPF_STACK, 0). In this example offset is 8,
-so it will fail verification, since it's out of bounds.
-
-The verifier will allow eBPF program to read data from stack only after
-it wrote into it.
-Classic BPF verifier does similar check with M[0-15] memory slots.
-For example:
-  bpf_ld R0 = *(u32 *)(R10 - 4)
-  bpf_exit
-is invalid program.
-Though R10 is correct read-only register and has type PTR_TO_STACK
-and R10 - 4 is within stack bounds, there were no stores into that location.
-
-Pointer register spill/fill is tracked as well, since four (R6-R9)
-callee saved registers may not be enough for some programs.
-
-Allowed function calls are customized with bpf_verifier_ops->get_func_proto()
-The eBPF verifier will check that registers match argument constraints.
-After the call register R0 will be set to return type of the function.
-
-Function calls is a main mechanism to extend functionality of eBPF programs.
-Socket filters may let programs to call one set of functions, whereas tracing
-filters may allow completely different set.
-
-If a function made accessible to eBPF program, it needs to be thought through
-from safety point of view. The verifier will guarantee that the function is
-called with valid arguments.
-
-seccomp vs socket filters have different security restrictions for classic BPF.
-Seccomp solves this by two stage verifier: classic BPF verifier is followed
-by seccomp verifier. In case of eBPF one configurable verifier is shared for
-all use cases.
-
-See details of eBPF verifier in kernel/bpf/verifier.c
-
-Register value tracking
------------------------
-In order to determine the safety of an eBPF program, the verifier must track
-the range of possible values in each register and also in each stack slot.
-This is done with 'struct bpf_reg_state', defined in include/linux/
-bpf_verifier.h, which unifies tracking of scalar and pointer values.  Each
-register state has a type, which is either NOT_INIT (the register has not been
-written to), SCALAR_VALUE (some value which is not usable as a pointer), or a
-pointer type.  The types of pointers describe their base, as follows:
-    PTR_TO_CTX          Pointer to bpf_context.
-    CONST_PTR_TO_MAP    Pointer to struct bpf_map.  "Const" because arithmetic
-                        on these pointers is forbidden.
-    PTR_TO_MAP_VALUE    Pointer to the value stored in a map element.
-    PTR_TO_MAP_VALUE_OR_NULL
-                        Either a pointer to a map value, or NULL; map accesses
-                        (see section 'eBPF maps', below) return this type,
-                        which becomes a PTR_TO_MAP_VALUE when checked != NULL.
-                        Arithmetic on these pointers is forbidden.
-    PTR_TO_STACK        Frame pointer.
-    PTR_TO_PACKET       skb->data.
-    PTR_TO_PACKET_END   skb->data + headlen; arithmetic forbidden.
-    PTR_TO_SOCKET       Pointer to struct bpf_sock_ops, implicitly refcounted.
-    PTR_TO_SOCKET_OR_NULL
-                        Either a pointer to a socket, or NULL; socket lookup
-                        returns this type, which becomes a PTR_TO_SOCKET when
-                        checked != NULL. PTR_TO_SOCKET is reference-counted,
-                        so programs must release the reference through the
-                        socket release function before the end of the program.
-                        Arithmetic on these pointers is forbidden.
-However, a pointer may be offset from this base (as a result of pointer
-arithmetic), and this is tracked in two parts: the 'fixed offset' and 'variable
-offset'.  The former is used when an exactly-known value (e.g. an immediate
-operand) is added to a pointer, while the latter is used for values which are
-not exactly known.  The variable offset is also used in SCALAR_VALUEs, to track
-the range of possible values in the register.
-The verifier's knowledge about the variable offset consists of:
-* minimum and maximum values as unsigned
-* minimum and maximum values as signed
-* knowledge of the values of individual bits, in the form of a 'tnum': a u64
-'mask' and a u64 'value'.  1s in the mask represent bits whose value is unknown;
-1s in the value represent bits known to be 1.  Bits known to be 0 have 0 in both
-mask and value; no bit should ever be 1 in both.  For example, if a byte is read
-into a register from memory, the register's top 56 bits are known zero, while
-the low 8 are unknown - which is represented as the tnum (0x0; 0xff).  If we
-then OR this with 0x40, we get (0x40; 0xbf), then if we add 1 we get (0x0;
-0x1ff), because of potential carries.
-
-Besides arithmetic, the register state can also be updated by conditional
-branches.  For instance, if a SCALAR_VALUE is compared > 8, in the 'true' branch
-it will have a umin_value (unsigned minimum value) of 9, whereas in the 'false'
-branch it will have a umax_value of 8.  A signed compare (with BPF_JSGT or
-BPF_JSGE) would instead update the signed minimum/maximum values.  Information
-from the signed and unsigned bounds can be combined; for instance if a value is
-first tested < 8 and then tested s> 4, the verifier will conclude that the value
-is also > 4 and s< 8, since the bounds prevent crossing the sign boundary.
-
-PTR_TO_PACKETs with a variable offset part have an 'id', which is common to all
-pointers sharing that same variable offset.  This is important for packet range
-checks: after adding a variable to a packet pointer register A, if you then copy
-it to another register B and then add a constant 4 to A, both registers will
-share the same 'id' but the A will have a fixed offset of +4.  Then if A is
-bounds-checked and found to be less than a PTR_TO_PACKET_END, the register B is
-now known to have a safe range of at least 4 bytes.  See 'Direct packet access',
-below, for more on PTR_TO_PACKET ranges.
-
-The 'id' field is also used on PTR_TO_MAP_VALUE_OR_NULL, common to all copies of
-the pointer returned from a map lookup.  This means that when one copy is
-checked and found to be non-NULL, all copies can become PTR_TO_MAP_VALUEs.
-As well as range-checking, the tracked information is also used for enforcing
-alignment of pointer accesses.  For instance, on most systems the packet pointer
-is 2 bytes after a 4-byte alignment.  If a program adds 14 bytes to that to jump
-over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting
-pointer will have a variable offset known to be 4n+2 for some n, so adding the 2
-bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through
-that pointer are safe.
-The 'id' field is also used on PTR_TO_SOCKET and PTR_TO_SOCKET_OR_NULL, common
-to all copies of the pointer returned from a socket lookup. This has similar
-behaviour to the handling for PTR_TO_MAP_VALUE_OR_NULL->PTR_TO_MAP_VALUE, but
-it also handles reference tracking for the pointer. PTR_TO_SOCKET implicitly
-represents a reference to the corresponding 'struct sock'. To ensure that the
-reference is not leaked, it is imperative to NULL-check the reference and in
-the non-NULL case, and pass the valid reference to the socket release function.
-
-Direct packet access
---------------------
-In cls_bpf and act_bpf programs the verifier allows direct access to the packet
-data via skb->data and skb->data_end pointers.
-Ex:
-1:  r4 = *(u32 *)(r1 +80)  /* load skb->data_end */
-2:  r3 = *(u32 *)(r1 +76)  /* load skb->data */
-3:  r5 = r3
-4:  r5 += 14
-5:  if r5 > r4 goto pc+16
-R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp
-6:  r0 = *(u16 *)(r3 +12) /* access 12 and 13 bytes of the packet */
-
-this 2byte load from the packet is safe to do, since the program author
-did check 'if (skb->data + 14 > skb->data_end) goto err' at insn #5 which
-means that in the fall-through case the register R3 (which points to skb->data)
-has at least 14 directly accessible bytes. The verifier marks it
-as R3=pkt(id=0,off=0,r=14).
-id=0 means that no additional variables were added to the register.
-off=0 means that no additional constants were added.
-r=14 is the range of safe access which means that bytes [R3, R3 + 14) are ok.
-Note that R5 is marked as R5=pkt(id=0,off=14,r=14). It also points
-to the packet data, but constant 14 was added to the register, so
-it now points to 'skb->data + 14' and accessible range is [R5, R5 + 14 - 14)
-which is zero bytes.
-
-More complex packet access may look like:
- R0=inv1 R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp
- 6:  r0 = *(u8 *)(r3 +7) /* load 7th byte from the packet */
- 7:  r4 = *(u8 *)(r3 +12)
- 8:  r4 *= 14
- 9:  r3 = *(u32 *)(r1 +76) /* load skb->data */
-10:  r3 += r4
-11:  r2 = r1
-12:  r2 <<= 48
-13:  r2 >>= 48
-14:  r3 += r2
-15:  r2 = r3
-16:  r2 += 8
-17:  r1 = *(u32 *)(r1 +80) /* load skb->data_end */
-18:  if r2 > r1 goto pc+2
- R0=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=pkt_end R2=pkt(id=2,off=8,r=8) R3=pkt(id=2,off=0,r=8) R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)) R5=pkt(id=0,off=14,r=14) R10=fp
-19:  r1 = *(u8 *)(r3 +4)
-The state of the register R3 is R3=pkt(id=2,off=0,r=8)
-id=2 means that two 'r3 += rX' instructions were seen, so r3 points to some
-offset within a packet and since the program author did
-'if (r3 + 8 > r1) goto err' at insn #18, the safe range is [R3, R3 + 8).
-The verifier only allows 'add'/'sub' operations on packet registers. Any other
-operation will set the register state to 'SCALAR_VALUE' and it won't be
-available for direct packet access.
-Operation 'r3 += rX' may overflow and become less than original skb->data,
-therefore the verifier has to prevent that.  So when it sees 'r3 += rX'
-instruction and rX is more than 16-bit value, any subsequent bounds-check of r3
-against skb->data_end will not give us 'range' information, so attempts to read
-through the pointer will give "invalid access to packet" error.
-Ex. after insn 'r4 = *(u8 *)(r3 +12)' (insn #7 above) the state of r4 is
-R4=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) which means that upper 56 bits
-of the register are guaranteed to be zero, and nothing is known about the lower
-8 bits. After insn 'r4 *= 14' the state becomes
-R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)), since multiplying an 8-bit
-value by constant 14 will keep upper 52 bits as zero, also the least significant
-bit will be zero as 14 is even.  Similarly 'r2 >>= 48' will make
-R2=inv(id=0,umax_value=65535,var_off=(0x0; 0xffff)), since the shift is not sign
-extending.  This logic is implemented in adjust_reg_min_max_vals() function,
-which calls adjust_ptr_min_max_vals() for adding pointer to scalar (or vice
-versa) and adjust_scalar_min_max_vals() for operations on two scalars.
-
-The end result is that bpf program author can access packet directly
-using normal C code as:
-  void *data = (void *)(long)skb->data;
-  void *data_end = (void *)(long)skb->data_end;
-  struct eth_hdr *eth = data;
-  struct iphdr *iph = data + sizeof(*eth);
-  struct udphdr *udp = data + sizeof(*eth) + sizeof(*iph);
-
-  if (data + sizeof(*eth) + sizeof(*iph) + sizeof(*udp) > data_end)
-          return 0;
-  if (eth->h_proto != htons(ETH_P_IP))
-          return 0;
-  if (iph->protocol != IPPROTO_UDP || iph->ihl != 5)
-          return 0;
-  if (udp->dest == 53 || udp->source == 9)
-          ...;
-which makes such programs easier to write comparing to LD_ABS insn
-and significantly faster.
-
-eBPF maps
----------
-'maps' is a generic storage of different types for sharing data between kernel
-and userspace.
-
-The maps are accessed from user space via BPF syscall, which has commands:
-- create a map with given type and attributes
-  map_fd = bpf(BPF_MAP_CREATE, union bpf_attr *attr, u32 size)
-  using attr->map_type, attr->key_size, attr->value_size, attr->max_entries
-  returns process-local file descriptor or negative error
-
-- lookup key in a given map
-  err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size)
-  using attr->map_fd, attr->key, attr->value
-  returns zero and stores found elem into value or negative error
-
-- create or update key/value pair in a given map
-  err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size)
-  using attr->map_fd, attr->key, attr->value
-  returns zero or negative error
-
-- find and delete element by key in a given map
-  err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size)
-  using attr->map_fd, attr->key
-
-- to delete map: close(fd)
-  Exiting process will delete maps automatically
-
-userspace programs use this syscall to create/access maps that eBPF programs
-are concurrently updating.
-
-maps can have different types: hash, array, bloom filter, radix-tree, etc.
-
-The map is defined by:
-  . type
-  . max number of elements
-  . key size in bytes
-  . value size in bytes
-
-Pruning
--------
-The verifier does not actually walk all possible paths through the program.  For
-each new branch to analyse, the verifier looks at all the states it's previously
-been in when at this instruction.  If any of them contain the current state as a
-subset, the branch is 'pruned' - that is, the fact that the previous state was
-accepted implies the current state would be as well.  For instance, if in the
-previous state, r1 held a packet-pointer, and in the current state, r1 holds a
-packet-pointer with a range as long or longer and at least as strict an
-alignment, then r1 is safe.  Similarly, if r2 was NOT_INIT before then it can't
-have been used by any path from that point, so any value in r2 (including
-another NOT_INIT) is safe.  The implementation is in the function regsafe().
-Pruning considers not only the registers but also the stack (and any spilled
-registers it may hold).  They must all be safe for the branch to be pruned.
-This is implemented in states_equal().
-
-Understanding eBPF verifier messages
-------------------------------------
-
-The following are few examples of invalid eBPF programs and verifier error
-messages as seen in the log:
-
-Program with unreachable instructions:
-static struct bpf_insn prog[] = {
-  BPF_EXIT_INSN(),
-  BPF_EXIT_INSN(),
-};
-Error:
-  unreachable insn 1
-
-Program that reads uninitialized register:
-  BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
-  BPF_EXIT_INSN(),
-Error:
-  0: (bf) r0 = r2
-  R2 !read_ok
-
-Program that doesn't initialize R0 before exiting:
-  BPF_MOV64_REG(BPF_REG_2, BPF_REG_1),
-  BPF_EXIT_INSN(),
-Error:
-  0: (bf) r2 = r1
-  1: (95) exit
-  R0 !read_ok
-
-Program that accesses stack out of bounds:
-  BPF_ST_MEM(BPF_DW, BPF_REG_10, 8, 0),
-  BPF_EXIT_INSN(),
-Error:
-  0: (7a) *(u64 *)(r10 +8) = 0
-  invalid stack off=8 size=8
-
-Program that doesn't initialize stack before passing its address into function:
-  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
-  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
-  BPF_LD_MAP_FD(BPF_REG_1, 0),
-  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
-  BPF_EXIT_INSN(),
-Error:
-  0: (bf) r2 = r10
-  1: (07) r2 += -8
-  2: (b7) r1 = 0x0
-  3: (85) call 1
-  invalid indirect read from stack off -8+0 size 8
-
-Program that uses invalid map_fd=0 while calling to map_lookup_elem() function:
-  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
-  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
-  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
-  BPF_LD_MAP_FD(BPF_REG_1, 0),
-  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
-  BPF_EXIT_INSN(),
-Error:
-  0: (7a) *(u64 *)(r10 -8) = 0
-  1: (bf) r2 = r10
-  2: (07) r2 += -8
-  3: (b7) r1 = 0x0
-  4: (85) call 1
-  fd 0 is not pointing to valid bpf_map
-
-Program that doesn't check return value of map_lookup_elem() before accessing
-map element:
-  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
-  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
-  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
-  BPF_LD_MAP_FD(BPF_REG_1, 0),
-  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
-  BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0),
-  BPF_EXIT_INSN(),
-Error:
-  0: (7a) *(u64 *)(r10 -8) = 0
-  1: (bf) r2 = r10
-  2: (07) r2 += -8
-  3: (b7) r1 = 0x0
-  4: (85) call 1
-  5: (7a) *(u64 *)(r0 +0) = 0
-  R0 invalid mem access 'map_value_or_null'
-
-Program that correctly checks map_lookup_elem() returned value for NULL, but
-accesses the memory with incorrect alignment:
-  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
-  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
-  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
-  BPF_LD_MAP_FD(BPF_REG_1, 0),
-  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
-  BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1),
-  BPF_ST_MEM(BPF_DW, BPF_REG_0, 4, 0),
-  BPF_EXIT_INSN(),
-Error:
-  0: (7a) *(u64 *)(r10 -8) = 0
-  1: (bf) r2 = r10
-  2: (07) r2 += -8
-  3: (b7) r1 = 1
-  4: (85) call 1
-  5: (15) if r0 == 0x0 goto pc+1
-   R0=map_ptr R10=fp
-  6: (7a) *(u64 *)(r0 +4) = 0
-  misaligned access off 4 size 8
-
-Program that correctly checks map_lookup_elem() returned value for NULL and
-accesses memory with correct alignment in one side of 'if' branch, but fails
-to do so in the other side of 'if' branch:
-  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
-  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
-  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
-  BPF_LD_MAP_FD(BPF_REG_1, 0),
-  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
-  BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2),
-  BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0),
-  BPF_EXIT_INSN(),
-  BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 1),
-  BPF_EXIT_INSN(),
-Error:
-  0: (7a) *(u64 *)(r10 -8) = 0
-  1: (bf) r2 = r10
-  2: (07) r2 += -8
-  3: (b7) r1 = 1
-  4: (85) call 1
-  5: (15) if r0 == 0x0 goto pc+2
-   R0=map_ptr R10=fp
-  6: (7a) *(u64 *)(r0 +0) = 0
-  7: (95) exit
-
-  from 5 to 8: R0=imm0 R10=fp
-  8: (7a) *(u64 *)(r0 +0) = 1
-  R0 invalid mem access 'imm'
-
-Program that performs a socket lookup then sets the pointer to NULL without
-checking it:
-value:
-  BPF_MOV64_IMM(BPF_REG_2, 0),
-  BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8),
-  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
-  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
-  BPF_MOV64_IMM(BPF_REG_3, 4),
-  BPF_MOV64_IMM(BPF_REG_4, 0),
-  BPF_MOV64_IMM(BPF_REG_5, 0),
-  BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp),
-  BPF_MOV64_IMM(BPF_REG_0, 0),
-  BPF_EXIT_INSN(),
-Error:
-  0: (b7) r2 = 0
-  1: (63) *(u32 *)(r10 -8) = r2
-  2: (bf) r2 = r10
-  3: (07) r2 += -8
-  4: (b7) r3 = 4
-  5: (b7) r4 = 0
-  6: (b7) r5 = 0
-  7: (85) call bpf_sk_lookup_tcp#65
-  8: (b7) r0 = 0
-  9: (95) exit
-  Unreleased reference id=1, alloc_insn=7
-
-Program that performs a socket lookup but does not NULL-check the returned
-value:
-  BPF_MOV64_IMM(BPF_REG_2, 0),
-  BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8),
-  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
-  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
-  BPF_MOV64_IMM(BPF_REG_3, 4),
-  BPF_MOV64_IMM(BPF_REG_4, 0),
-  BPF_MOV64_IMM(BPF_REG_5, 0),
-  BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp),
-  BPF_EXIT_INSN(),
-Error:
-  0: (b7) r2 = 0
-  1: (63) *(u32 *)(r10 -8) = r2
-  2: (bf) r2 = r10
-  3: (07) r2 += -8
-  4: (b7) r3 = 4
-  5: (b7) r4 = 0
-  6: (b7) r5 = 0
-  7: (85) call bpf_sk_lookup_tcp#65
-  8: (95) exit
-  Unreleased reference id=1, alloc_insn=7
-
-Testing
--------
-
-Next to the BPF toolchain, the kernel also ships a test module that contains
-various test cases for classic and internal BPF that can be executed against
-the BPF interpreter and JIT compiler. It can be found in lib/test_bpf.c and
-enabled via Kconfig:
-
-  CONFIG_TEST_BPF=m
-
-After the module has been built and installed, the test suite can be executed
-via insmod or modprobe against 'test_bpf' module. Results of the test cases
-including timings in nsec can be found in the kernel log (dmesg).
-
-Misc
-----
-
-Also trinity, the Linux syscall fuzzer, has built-in support for BPF and
-SECCOMP-BPF kernel fuzzing.
-
-Written by
-----------
-
-The document was written in the hope that it is found useful and in order
-to give potential BPF hackers or security auditors a better overview of
-the underlying architecture.
-
-Jay Schulist <jschlst@samba.org>
-Daniel Borkmann <daniel@iogearbox.net>
-Alexei Starovoitov <ast@kernel.org>
diff --git a/Documentation/networking/fore200e.rst b/Documentation/networking/fore200e.rst
new file mode 100644
index 000000000000..55df9ec09ac8
--- /dev/null
+++ b/Documentation/networking/fore200e.rst
@@ -0,0 +1,66 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================================
+FORE Systems PCA-200E/SBA-200E ATM NIC driver
+=============================================
+
+This driver adds support for the FORE Systems 200E-series ATM adapters
+to the Linux operating system. It is based on the earlier PCA-200E driver
+written by Uwe Dannowski.
+
+The driver simultaneously supports PCA-200E and SBA-200E adapters on
+i386, alpha (untested), powerpc, sparc and sparc64 archs.
+
+The intent is to enable the use of different models of FORE adapters at the
+same time, by hosts that have several bus interfaces (such as PCI+SBUS,
+or PCI+EISA).
+
+Only PCI and SBUS devices are currently supported by the driver, but support
+for other bus interfaces such as EISA should not be too hard to add.
+
+
+Firmware Copyright Notice
+-------------------------
+
+Please read the fore200e_firmware_copyright file present
+in the linux/drivers/atm directory for details and restrictions.
+
+
+Firmware Updates
+----------------
+
+The FORE Systems 200E-series driver is shipped with firmware data being
+uploaded to the ATM adapters at system boot time or at module loading time.
+The supplied firmware images should work with all adapters.
+
+However, if you encounter problems (the firmware doesn't start or the driver
+is unable to read the PROM data), you may consider trying another firmware
+version. Alternative binary firmware images can be found somewhere on the
+ForeThought CD-ROM supplied with your adapter by FORE Systems.
+
+You can also get the latest firmware images from FORE Systems at
+https://en.wikipedia.org/wiki/FORE_Systems. Register TACTics Online and go to
+the 'software updates' pages. The firmware binaries are part of
+the various ForeThought software distributions.
+
+Notice that different versions of the PCA-200E firmware exist, depending
+on the endianness of the host architecture. The driver is shipped with
+both little and big endian PCA firmware images.
+
+Name and location of the new firmware images can be set at kernel
+configuration time:
+
+1. Copy the new firmware binary files (with .bin, .bin1 or .bin2 suffix)
+   to some directory, such as linux/drivers/atm.
+
+2. Reconfigure your kernel to set the new firmware name and location.
+   Expected pathnames are absolute or relative to the drivers/atm directory.
+
+3. Rebuild and re-install your kernel or your module.
+
+
+Feedback
+--------
+
+Feedback is welcome. Please send success stories/bug reports/
+patches/improvement/comments/flames to <lizzi@cnam.fr>.
diff --git a/Documentation/networking/fore200e.txt b/Documentation/networking/fore200e.txt
deleted file mode 100644
index 1f98f62b4370..000000000000
--- a/Documentation/networking/fore200e.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-
-FORE Systems PCA-200E/SBA-200E ATM NIC driver
----------------------------------------------
-
-This driver adds support for the FORE Systems 200E-series ATM adapters
-to the Linux operating system. It is based on the earlier PCA-200E driver
-written by Uwe Dannowski.
-
-The driver simultaneously supports PCA-200E and SBA-200E adapters on
-i386, alpha (untested), powerpc, sparc and sparc64 archs.
-
-The intent is to enable the use of different models of FORE adapters at the
-same time, by hosts that have several bus interfaces (such as PCI+SBUS,
-or PCI+EISA).
-
-Only PCI and SBUS devices are currently supported by the driver, but support
-for other bus interfaces such as EISA should not be too hard to add.
-
-
-Firmware Copyright Notice
--------------------------
-
-Please read the fore200e_firmware_copyright file present
-in the linux/drivers/atm directory for details and restrictions.
-
-
-Firmware Updates
-----------------
-
-The FORE Systems 200E-series driver is shipped with firmware data being 
-uploaded to the ATM adapters at system boot time or at module loading time. 
-The supplied firmware images should work with all adapters.
-
-However, if you encounter problems (the firmware doesn't start or the driver
-is unable to read the PROM data), you may consider trying another firmware
-version. Alternative binary firmware images can be found somewhere on the
-ForeThought CD-ROM supplied with your adapter by FORE Systems.
-
-You can also get the latest firmware images from FORE Systems at
-https://en.wikipedia.org/wiki/FORE_Systems. Register TACTics Online and go to
-the 'software updates' pages. The firmware binaries are part of
-the various ForeThought software distributions.
-
-Notice that different versions of the PCA-200E firmware exist, depending
-on the endianness of the host architecture. The driver is shipped with
-both little and big endian PCA firmware images.
-
-Name and location of the new firmware images can be set at kernel
-configuration time:
-
-1. Copy the new firmware binary files (with .bin, .bin1 or .bin2 suffix)
-   to some directory, such as linux/drivers/atm.
-
-2. Reconfigure your kernel to set the new firmware name and location.
-   Expected pathnames are absolute or relative to the drivers/atm directory.
-
-3. Rebuild and re-install your kernel or your module.
-
-
-Feedback
---------
-
-Feedback is welcome. Please send success stories/bug reports/
-patches/improvement/comments/flames to <lizzi@cnam.fr>.
diff --git a/Documentation/networking/framerelay.rst b/Documentation/networking/framerelay.rst
new file mode 100644
index 000000000000..6d904399ec6d
--- /dev/null
+++ b/Documentation/networking/framerelay.rst
@@ -0,0 +1,44 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+Frame Relay (FR)
+================
+
+Frame Relay (FR) support for linux is built into a two tiered system of device
+drivers.  The upper layer implements RFC1490 FR specification, and uses the
+Data Link Connection Identifier (DLCI) as its hardware address.  Usually these
+are assigned by your network supplier, they give you the number/numbers of
+the Virtual Connections (VC) assigned to you.
+
+Each DLCI is a point-to-point link between your machine and a remote one.
+As such, a separate device is needed to accommodate the routing.  Within the
+net-tools archives is 'dlcicfg'.  This program will communicate with the
+base "DLCI" device, and create new net devices named 'dlci00', 'dlci01'...
+The configuration script will ask you how many DLCIs you need, as well as
+how many DLCIs you want to assign to each Frame Relay Access Device (FRAD).
+
+The DLCI uses a number of function calls to communicate with the FRAD, all
+of which are stored in the FRAD's private data area.  assoc/deassoc,
+activate/deactivate and dlci_config.  The DLCI supplies a receive function
+to the FRAD to accept incoming packets.
+
+With this initial offering, only 1 FRAD driver is available.  With many thanks
+to Sangoma Technologies, David Mandelstam & Gene Kozin, the S502A, S502E &
+S508 are supported.  This driver is currently set up for only FR, but as
+Sangoma makes more firmware modules available, it can be updated to provide
+them as well.
+
+Configuration of the FRAD makes use of another net-tools program, 'fradcfg'.
+This program makes use of a configuration file (which dlcicfg can also read)
+to specify the types of boards to be configured as FRADs, as well as perform
+any board specific configuration.  The Sangoma module of fradcfg loads the
+FR firmware into the card, sets the irq/port/memory information, and provides
+an initial configuration.
+
+Additional FRAD device drivers can be added as hardware is available.
+
+At this time, the dlcicfg and fradcfg programs have not been incorporated into
+the net-tools distribution.  They can be found at ftp.invlogic.com, in
+/pub/linux.  Note that with OS/2 FTPD, you end up in /pub by default, so just
+use 'cd linux'.  v0.10 is for use on pre-2.0.3 and earlier, v0.15 is for
+pre-2.0.4 and later.
diff --git a/Documentation/networking/framerelay.txt b/Documentation/networking/framerelay.txt
deleted file mode 100644
index 1a0b720440dd..000000000000
--- a/Documentation/networking/framerelay.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Frame Relay (FR) support for linux is built into a two tiered system of device 
-drivers.  The upper layer implements RFC1490 FR specification, and uses the
-Data Link Connection Identifier (DLCI) as its hardware address.  Usually these
-are assigned by your network supplier, they give you the number/numbers of
-the Virtual Connections (VC) assigned to you.
-
-Each DLCI is a point-to-point link between your machine and a remote one.
-As such, a separate device is needed to accommodate the routing.  Within the
-net-tools archives is 'dlcicfg'.  This program will communicate with the
-base "DLCI" device, and create new net devices named 'dlci00', 'dlci01'... 
-The configuration script will ask you how many DLCIs you need, as well as
-how many DLCIs you want to assign to each Frame Relay Access Device (FRAD).
-
-The DLCI uses a number of function calls to communicate with the FRAD, all
-of which are stored in the FRAD's private data area.  assoc/deassoc, 
-activate/deactivate and dlci_config.  The DLCI supplies a receive function
-to the FRAD to accept incoming packets.
-
-With this initial offering, only 1 FRAD driver is available.  With many thanks
-to Sangoma Technologies, David Mandelstam & Gene Kozin, the S502A, S502E & 
-S508 are supported.  This driver is currently set up for only FR, but as 
-Sangoma makes more firmware modules available, it can be updated to provide
-them as well.
-
-Configuration of the FRAD makes use of another net-tools program, 'fradcfg'.
-This program makes use of a configuration file (which dlcicfg can also read)
-to specify the types of boards to be configured as FRADs, as well as perform
-any board specific configuration.  The Sangoma module of fradcfg loads the
-FR firmware into the card, sets the irq/port/memory information, and provides
-an initial configuration.
-
-Additional FRAD device drivers can be added as hardware is available.
-
-At this time, the dlcicfg and fradcfg programs have not been incorporated into
-the net-tools distribution.  They can be found at ftp.invlogic.com, in 
-/pub/linux.  Note that with OS/2 FTPD, you end up in /pub by default, so just
-use 'cd linux'.  v0.10 is for use on pre-2.0.3 and earlier, v0.15 is for 
-pre-2.0.4 and later.
-
diff --git a/Documentation/networking/gen_stats.rst b/Documentation/networking/gen_stats.rst
new file mode 100644
index 000000000000..595a83b9a61b
--- /dev/null
+++ b/Documentation/networking/gen_stats.rst
@@ -0,0 +1,129 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+Generic networking statistics for netlink users
+===============================================
+
+Statistic counters are grouped into structs:
+
+==================== ===================== =====================
+Struct               TLV type              Description
+==================== ===================== =====================
+gnet_stats_basic     TCA_STATS_BASIC       Basic statistics
+gnet_stats_rate_est  TCA_STATS_RATE_EST    Rate estimator
+gnet_stats_queue     TCA_STATS_QUEUE       Queue statistics
+none                 TCA_STATS_APP         Application specific
+==================== ===================== =====================
+
+
+Collecting:
+-----------
+
+Declare the statistic structs you need::
+
+	struct mystruct {
+		struct gnet_stats_basic	bstats;
+		struct gnet_stats_queue	qstats;
+		...
+	};
+
+Update statistics, in dequeue() methods only, (while owning qdisc->running)::
+
+	mystruct->tstats.packet++;
+	mystruct->qstats.backlog += skb->pkt_len;
+
+
+Export to userspace (Dump):
+---------------------------
+
+::
+
+    my_dumping_routine(struct sk_buff *skb, ...)
+    {
+	    struct gnet_dump dump;
+
+	    if (gnet_stats_start_copy(skb, TCA_STATS2, &mystruct->lock, &dump,
+				    TCA_PAD) < 0)
+		    goto rtattr_failure;
+
+	    if (gnet_stats_copy_basic(&dump, &mystruct->bstats) < 0 ||
+		gnet_stats_copy_queue(&dump, &mystruct->qstats) < 0 ||
+		    gnet_stats_copy_app(&dump, &xstats, sizeof(xstats)) < 0)
+		    goto rtattr_failure;
+
+	    if (gnet_stats_finish_copy(&dump) < 0)
+		    goto rtattr_failure;
+	    ...
+    }
+
+TCA_STATS/TCA_XSTATS backward compatibility:
+--------------------------------------------
+
+Prior users of struct tc_stats and xstats can maintain backward
+compatibility by calling the compat wrappers to keep providing the
+existing TLV types::
+
+    my_dumping_routine(struct sk_buff *skb, ...)
+    {
+	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
+					TCA_XSTATS, &mystruct->lock, &dump,
+					TCA_PAD) < 0)
+		    goto rtattr_failure;
+	    ...
+    }
+
+A struct tc_stats will be filled out during gnet_stats_copy_* calls
+and appended to the skb. TCA_XSTATS is provided if gnet_stats_copy_app
+was called.
+
+
+Locking:
+--------
+
+Locks are taken before writing and released once all statistics have
+been written. Locks are always released in case of an error. You
+are responsible for making sure that the lock is initialized.
+
+
+Rate Estimator:
+---------------
+
+0) Prepare an estimator attribute. Most likely this would be in user
+   space. The value of this TLV should contain a tc_estimator structure.
+   As usual, such a TLV needs to be 32 bit aligned and therefore the
+   length needs to be appropriately set, etc. The estimator interval
+   and ewma log need to be converted to the appropriate values.
+   tc_estimator.c::tc_setup_estimator() is advisable to be used as the
+   conversion routine. It does a few clever things. It takes a time
+   interval in microsecs, a time constant also in microsecs and a struct
+   tc_estimator to  be populated. The returned tc_estimator can be
+   transported to the kernel.  Transfer such a structure in a TLV of type
+   TCA_RATE to your code in the kernel.
+
+In the kernel when setting up:
+
+1) make sure you have basic stats and rate stats setup first.
+2) make sure you have initialized stats lock that is used to setup such
+   stats.
+3) Now initialize a new estimator::
+
+    int ret = gen_new_estimator(my_basicstats,my_rate_est_stats,
+	mystats_lock, attr_with_tcestimator_struct);
+
+    if ret == 0
+	success
+    else
+	failed
+
+From now on, every time you dump my_rate_est_stats it will contain
+up-to-date info.
+
+Once you are done, call gen_kill_estimator(my_basicstats,
+my_rate_est_stats) Make sure that my_basicstats and my_rate_est_stats
+are still valid (i.e still exist) at the time of making this call.
+
+
+Authors:
+--------
+- Thomas Graf <tgraf@suug.ch>
+- Jamal Hadi Salim <hadi@cyberus.ca>
diff --git a/Documentation/networking/gen_stats.txt b/Documentation/networking/gen_stats.txt
deleted file mode 100644
index 179b18ce45ff..000000000000
--- a/Documentation/networking/gen_stats.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-Generic networking statistics for netlink users
-======================================================================
-
-Statistic counters are grouped into structs:
-
-Struct               TLV type              Description
-----------------------------------------------------------------------
-gnet_stats_basic     TCA_STATS_BASIC       Basic statistics
-gnet_stats_rate_est  TCA_STATS_RATE_EST    Rate estimator
-gnet_stats_queue     TCA_STATS_QUEUE       Queue statistics
-none                 TCA_STATS_APP         Application specific
-
-
-Collecting:
------------
-
-Declare the statistic structs you need:
-struct mystruct {
-	struct gnet_stats_basic	bstats;
-	struct gnet_stats_queue	qstats;
-	...
-};
-
-Update statistics, in dequeue() methods only, (while owning qdisc->running)
-mystruct->tstats.packet++;
-mystruct->qstats.backlog += skb->pkt_len;
-
-
-Export to userspace (Dump):
----------------------------
-
-my_dumping_routine(struct sk_buff *skb, ...)
-{
-	struct gnet_dump dump;
-
-	if (gnet_stats_start_copy(skb, TCA_STATS2, &mystruct->lock, &dump,
-				  TCA_PAD) < 0)
-		goto rtattr_failure;
-
-	if (gnet_stats_copy_basic(&dump, &mystruct->bstats) < 0 ||
-	    gnet_stats_copy_queue(&dump, &mystruct->qstats) < 0 ||
-		gnet_stats_copy_app(&dump, &xstats, sizeof(xstats)) < 0)
-		goto rtattr_failure;
-
-	if (gnet_stats_finish_copy(&dump) < 0)
-		goto rtattr_failure;
-	...
-}
-
-TCA_STATS/TCA_XSTATS backward compatibility:
---------------------------------------------
-
-Prior users of struct tc_stats and xstats can maintain backward
-compatibility by calling the compat wrappers to keep providing the
-existing TLV types.
-
-my_dumping_routine(struct sk_buff *skb, ...)
-{
-    if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
-				     TCA_XSTATS, &mystruct->lock, &dump,
-				     TCA_PAD) < 0)
-		goto rtattr_failure;
-	...
-}
-
-A struct tc_stats will be filled out during gnet_stats_copy_* calls
-and appended to the skb. TCA_XSTATS is provided if gnet_stats_copy_app
-was called.
-
-
-Locking:
---------
-
-Locks are taken before writing and released once all statistics have
-been written. Locks are always released in case of an error. You
-are responsible for making sure that the lock is initialized.
-
-
-Rate Estimator:
---------------
-
-0) Prepare an estimator attribute. Most likely this would be in user
-   space. The value of this TLV should contain a tc_estimator structure.
-   As usual, such a TLV needs to be 32 bit aligned and therefore the
-   length needs to be appropriately set, etc. The estimator interval
-   and ewma log need to be converted to the appropriate values.
-   tc_estimator.c::tc_setup_estimator() is advisable to be used as the
-   conversion routine. It does a few clever things. It takes a time
-   interval in microsecs, a time constant also in microsecs and a struct
-   tc_estimator to  be populated. The returned tc_estimator can be
-   transported to the kernel.  Transfer such a structure in a TLV of type
-   TCA_RATE to your code in the kernel.
-
-In the kernel when setting up:
-1) make sure you have basic stats and rate stats setup first.
-2) make sure you have initialized stats lock that is used to setup such
-   stats.
-3) Now initialize a new estimator:
-
-   int ret = gen_new_estimator(my_basicstats,my_rate_est_stats,
-       mystats_lock, attr_with_tcestimator_struct);
-
-   if ret == 0
-       success
-   else
-       failed
-
-From now on, every time you dump my_rate_est_stats it will contain
-up-to-date info.
-
-Once you are done, call gen_kill_estimator(my_basicstats,
-my_rate_est_stats) Make sure that my_basicstats and my_rate_est_stats
-are still valid (i.e still exist) at the time of making this call.
-
-
-Authors:
---------
-Thomas Graf <tgraf@suug.ch>
-Jamal Hadi Salim <hadi@cyberus.ca>
diff --git a/Documentation/networking/generic-hdlc.rst b/Documentation/networking/generic-hdlc.rst
new file mode 100644
index 000000000000..1c3bb5cb98d4
--- /dev/null
+++ b/Documentation/networking/generic-hdlc.rst
@@ -0,0 +1,170 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+Generic HDLC layer
+==================
+
+Krzysztof Halasa <khc@pm.waw.pl>
+
+
+Generic HDLC layer currently supports:
+
+1. Frame Relay (ANSI, CCITT, Cisco and no LMI)
+
+   - Normal (routed) and Ethernet-bridged (Ethernet device emulation)
+     interfaces can share a single PVC.
+   - ARP support (no InARP support in the kernel - there is an
+     experimental InARP user-space daemon available on:
+     http://www.kernel.org/pub/linux/utils/net/hdlc/).
+
+2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation
+3. Cisco HDLC
+4. PPP
+5. X.25 (uses X.25 routines).
+
+Generic HDLC is a protocol driver only - it needs a low-level driver
+for your particular hardware.
+
+Ethernet device emulation (using HDLC or Frame-Relay PVC) is compatible
+with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
+
+
+Make sure the hdlc.o and the hardware driver are loaded. It should
+create a number of "hdlc" (hdlc0 etc) network devices, one for each
+WAN port. You'll need the "sethdlc" utility, get it from:
+
+	http://www.kernel.org/pub/linux/utils/net/hdlc/
+
+Compile sethdlc.c utility::
+
+	gcc -O2 -Wall -o sethdlc sethdlc.c
+
+Make sure you're using a correct version of sethdlc for your kernel.
+
+Use sethdlc to set physical interface, clock rate, HDLC mode used,
+and add any required PVCs if using Frame Relay.
+Usually you want something like::
+
+	sethdlc hdlc0 clock int rate 128000
+	sethdlc hdlc0 cisco interval 10 timeout 25
+
+or::
+
+	sethdlc hdlc0 rs232 clock ext
+	sethdlc hdlc0 fr lmi ansi
+	sethdlc hdlc0 create 99
+	ifconfig hdlc0 up
+	ifconfig pvc0 localIP pointopoint remoteIP
+
+In Frame Relay mode, ifconfig master hdlc device up (without assigning
+any IP address to it) before using pvc devices.
+
+
+Setting interface:
+
+* v35 | rs232 | x21 | t1 | e1
+    - sets physical interface for a given port
+      if the card has software-selectable interfaces
+  loopback
+    - activate hardware loopback (for testing only)
+* clock ext
+    - both RX clock and TX clock external
+* clock int
+    - both RX clock and TX clock internal
+* clock txint
+    - RX clock external, TX clock internal
+* clock txfromrx
+    - RX clock external, TX clock derived from RX clock
+* rate
+    - sets clock rate in bps (for "int" or "txint" clock only)
+
+
+Setting protocol:
+
+* hdlc - sets raw HDLC (IP-only) mode
+
+  nrz / nrzi / fm-mark / fm-space / manchester - sets transmission code
+
+  no-parity / crc16 / crc16-pr0 (CRC16 with preset zeros) / crc32-itu
+
+  crc16-itu (CRC16 with ITU-T polynomial) / crc16-itu-pr0 - sets parity
+
+* hdlc-eth - Ethernet device emulation using HDLC. Parity and encoding
+  as above.
+
+* cisco - sets Cisco HDLC mode (IP, IPv6 and IPX supported)
+
+  interval - time in seconds between keepalive packets
+
+  timeout - time in seconds after last received keepalive packet before
+	    we assume the link is down
+
+* ppp - sets synchronous PPP mode
+
+* x25 - sets X.25 mode
+
+* fr - Frame Relay mode
+
+  lmi ansi / ccitt / cisco / none - LMI (link management) type
+
+  dce - Frame Relay DCE (network) side LMI instead of default DTE (user).
+
+  It has nothing to do with clocks!
+
+  - t391 - link integrity verification polling timer (in seconds) - user
+  - t392 - polling verification timer (in seconds) - network
+  - n391 - full status polling counter - user
+  - n392 - error threshold - both user and network
+  - n393 - monitored events count - both user and network
+
+Frame-Relay only:
+
+* create n | delete n - adds / deletes PVC interface with DLCI #n.
+  Newly created interface will be named pvc0, pvc1 etc.
+
+* create ether n | delete ether n - adds a device for Ethernet-bridged
+  frames. The device will be named pvceth0, pvceth1 etc.
+
+
+
+
+Board-specific issues
+---------------------
+
+n2.o and c101.o need parameters to work::
+
+	insmod n2 hw=io,irq,ram,ports[:io,irq,...]
+
+example::
+
+	insmod n2 hw=0x300,10,0xD0000,01
+
+or::
+
+	insmod c101 hw=irq,ram[:irq,...]
+
+example::
+
+	insmod c101 hw=9,0xdc000
+
+If built into the kernel, these drivers need kernel (command line) parameters::
+
+	n2.hw=io,irq,ram,ports:...
+
+or::
+
+	c101.hw=irq,ram:...
+
+
+
+If you have a problem with N2, C101 or PLX200SYN card, you can issue the
+"private" command to see port's packet descriptor rings (in kernel logs)::
+
+	sethdlc hdlc0 private
+
+The hardware driver has to be build with #define DEBUG_RINGS.
+Attaching this info to bug reports would be helpful. Anyway, let me know
+if you have problems using this.
+
+For patches and other info look at:
+<http://www.kernel.org/pub/linux/utils/net/hdlc/>.
diff --git a/Documentation/networking/generic-hdlc.txt b/Documentation/networking/generic-hdlc.txt
deleted file mode 100644
index 4eb3cc40b702..000000000000
--- a/Documentation/networking/generic-hdlc.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-Generic HDLC layer
-Krzysztof Halasa <khc@pm.waw.pl>
-
-
-Generic HDLC layer currently supports:
-1. Frame Relay (ANSI, CCITT, Cisco and no LMI)
-   - Normal (routed) and Ethernet-bridged (Ethernet device emulation)
-     interfaces can share a single PVC.
-   - ARP support (no InARP support in the kernel - there is an
-     experimental InARP user-space daemon available on:
-     http://www.kernel.org/pub/linux/utils/net/hdlc/).
-2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation
-3. Cisco HDLC
-4. PPP
-5. X.25 (uses X.25 routines).
-
-Generic HDLC is a protocol driver only - it needs a low-level driver
-for your particular hardware.
-
-Ethernet device emulation (using HDLC or Frame-Relay PVC) is compatible
-with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
-
-
-Make sure the hdlc.o and the hardware driver are loaded. It should
-create a number of "hdlc" (hdlc0 etc) network devices, one for each
-WAN port. You'll need the "sethdlc" utility, get it from:
-	http://www.kernel.org/pub/linux/utils/net/hdlc/
-
-Compile sethdlc.c utility:
-	gcc -O2 -Wall -o sethdlc sethdlc.c
-Make sure you're using a correct version of sethdlc for your kernel.
-
-Use sethdlc to set physical interface, clock rate, HDLC mode used,
-and add any required PVCs if using Frame Relay.
-Usually you want something like:
-
-	sethdlc hdlc0 clock int rate 128000
-	sethdlc hdlc0 cisco interval 10 timeout 25
-or
-	sethdlc hdlc0 rs232 clock ext
-	sethdlc hdlc0 fr lmi ansi
-	sethdlc hdlc0 create 99
-	ifconfig hdlc0 up
-	ifconfig pvc0 localIP pointopoint remoteIP
-
-In Frame Relay mode, ifconfig master hdlc device up (without assigning
-any IP address to it) before using pvc devices.
-
-
-Setting interface:
-
-* v35 | rs232 | x21 | t1 | e1 - sets physical interface for a given port
-                                if the card has software-selectable interfaces
-  loopback - activate hardware loopback (for testing only)
-* clock ext - both RX clock and TX clock external
-* clock int - both RX clock and TX clock internal
-* clock txint - RX clock external, TX clock internal
-* clock txfromrx - RX clock external, TX clock derived from RX clock
-* rate - sets clock rate in bps (for "int" or "txint" clock only)
-
-
-Setting protocol:
-
-* hdlc - sets raw HDLC (IP-only) mode
-  nrz / nrzi / fm-mark / fm-space / manchester - sets transmission code
-  no-parity / crc16 / crc16-pr0 (CRC16 with preset zeros) / crc32-itu
-  crc16-itu (CRC16 with ITU-T polynomial) / crc16-itu-pr0 - sets parity
-
-* hdlc-eth - Ethernet device emulation using HDLC. Parity and encoding
-  as above.
-
-* cisco - sets Cisco HDLC mode (IP, IPv6 and IPX supported)
-  interval - time in seconds between keepalive packets
-  timeout - time in seconds after last received keepalive packet before
-            we assume the link is down
-
-* ppp - sets synchronous PPP mode
-
-* x25 - sets X.25 mode
-
-* fr - Frame Relay mode
-  lmi ansi / ccitt / cisco / none - LMI (link management) type
-  dce - Frame Relay DCE (network) side LMI instead of default DTE (user).
-  It has nothing to do with clocks!
-  t391 - link integrity verification polling timer (in seconds) - user
-  t392 - polling verification timer (in seconds) - network
-  n391 - full status polling counter - user
-  n392 - error threshold - both user and network
-  n393 - monitored events count - both user and network
-
-Frame-Relay only:
-* create n | delete n - adds / deletes PVC interface with DLCI #n.
-  Newly created interface will be named pvc0, pvc1 etc.
-
-* create ether n | delete ether n - adds a device for Ethernet-bridged
-  frames. The device will be named pvceth0, pvceth1 etc.
-
-
-
-
-Board-specific issues
----------------------
-
-n2.o and c101.o need parameters to work:
-
-	insmod n2 hw=io,irq,ram,ports[:io,irq,...]
-example:
-	insmod n2 hw=0x300,10,0xD0000,01
-
-or
-	insmod c101 hw=irq,ram[:irq,...]
-example:
-	insmod c101 hw=9,0xdc000
-
-If built into the kernel, these drivers need kernel (command line) parameters:
-	n2.hw=io,irq,ram,ports:...
-or
-	c101.hw=irq,ram:...
-
-
-
-If you have a problem with N2, C101 or PLX200SYN card, you can issue the
-"private" command to see port's packet descriptor rings (in kernel logs):
-
-	sethdlc hdlc0 private
-
-The hardware driver has to be build with #define DEBUG_RINGS.
-Attaching this info to bug reports would be helpful. Anyway, let me know
-if you have problems using this.
-
-For patches and other info look at:
-<http://www.kernel.org/pub/linux/utils/net/hdlc/>.
diff --git a/Documentation/networking/generic_netlink.rst b/Documentation/networking/generic_netlink.rst
new file mode 100644
index 000000000000..59e04ccf80c1
--- /dev/null
+++ b/Documentation/networking/generic_netlink.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Generic Netlink
+===============
+
+A wiki document on how to use Generic Netlink can be found here:
+
+ * http://www.linuxfoundation.org/collaborate/workgroups/networking/generic_netlink_howto
diff --git a/Documentation/networking/generic_netlink.txt b/Documentation/networking/generic_netlink.txt
deleted file mode 100644
index 3e071115ca90..000000000000
--- a/Documentation/networking/generic_netlink.txt
+++ /dev/null
@@ -1,3 +0,0 @@
-A wiki document on how to use Generic Netlink can be found here:
-
- * http://www.linuxfoundation.org/collaborate/workgroups/networking/generic_netlink_howto
diff --git a/Documentation/networking/gtp.rst b/Documentation/networking/gtp.rst
new file mode 100644
index 000000000000..1563fb94b289
--- /dev/null
+++ b/Documentation/networking/gtp.rst
@@ -0,0 +1,251 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+The Linux kernel GTP tunneling module
+=====================================
+
+Documentation by
+		 Harald Welte <laforge@gnumonks.org> and
+		 Andreas Schultz <aschultz@tpip.net>
+
+In 'drivers/net/gtp.c' you are finding a kernel-level implementation
+of a GTP tunnel endpoint.
+
+What is GTP
+===========
+
+GTP is the Generic Tunnel Protocol, which is a 3GPP protocol used for
+tunneling User-IP payload between a mobile station (phone, modem)
+and the interconnection between an external packet data network (such
+as the internet).
+
+So when you start a 'data connection' from your mobile phone, the
+phone will use the control plane to signal for the establishment of
+such a tunnel between that external data network and the phone.  The
+tunnel endpoints thus reside on the phone and in the gateway.  All
+intermediate nodes just transport the encapsulated packet.
+
+The phone itself does not implement GTP but uses some other
+technology-dependent protocol stack for transmitting the user IP
+payload, such as LLC/SNDCP/RLC/MAC.
+
+At some network element inside the cellular operator infrastructure
+(SGSN in case of GPRS/EGPRS or classic UMTS, hNodeB in case of a 3G
+femtocell, eNodeB in case of 4G/LTE), the cellular protocol stacking
+is translated into GTP *without breaking the end-to-end tunnel*.  So
+intermediate nodes just perform some specific relay function.
+
+At some point the GTP packet ends up on the so-called GGSN (GSM/UMTS)
+or P-GW (LTE), which terminates the tunnel, decapsulates the packet
+and forwards it onto an external packet data network.  This can be
+public internet, but can also be any private IP network (or even
+theoretically some non-IP network like X.25).
+
+You can find the protocol specification in 3GPP TS 29.060, available
+publicly via the 3GPP website at http://www.3gpp.org/DynaReport/29060.htm
+
+A direct PDF link to v13.6.0 is provided for convenience below:
+http://www.etsi.org/deliver/etsi_ts/129000_129099/129060/13.06.00_60/ts_129060v130600p.pdf
+
+The Linux GTP tunnelling module
+===============================
+
+The module implements the function of a tunnel endpoint, i.e. it is
+able to decapsulate tunneled IP packets in the uplink originated by
+the phone, and encapsulate raw IP packets received from the external
+packet network in downlink towards the phone.
+
+It *only* implements the so-called 'user plane', carrying the User-IP
+payload, called GTP-U.  It does not implement the 'control plane',
+which is a signaling protocol used for establishment and teardown of
+GTP tunnels (GTP-C).
+
+So in order to have a working GGSN/P-GW setup, you will need a
+userspace program that implements the GTP-C protocol and which then
+uses the netlink interface provided by the GTP-U module in the kernel
+to configure the kernel module.
+
+This split architecture follows the tunneling modules of other
+protocols, e.g. PPPoE or L2TP, where you also run a userspace daemon
+to handle the tunnel establishment, authentication etc. and only the
+data plane is accelerated inside the kernel.
+
+Don't be confused by terminology:  The GTP User Plane goes through
+kernel accelerated path, while the GTP Control Plane goes to
+Userspace :)
+
+The official homepage of the module is at
+https://osmocom.org/projects/linux-kernel-gtp-u/wiki
+
+Userspace Programs with Linux Kernel GTP-U support
+==================================================
+
+At the time of this writing, there are at least two Free Software
+implementations that implement GTP-C and can use the netlink interface
+to make use of the Linux kernel GTP-U support:
+
+* OpenGGSN (classic 2G/3G GGSN in C):
+  https://osmocom.org/projects/openggsn/wiki/OpenGGSN
+
+* ergw (GGSN + P-GW in Erlang):
+  https://github.com/travelping/ergw
+
+Userspace Library / Command Line Utilities
+==========================================
+
+There is a userspace library called 'libgtpnl' which is based on
+libmnl and which implements a C-language API towards the netlink
+interface provided by the Kernel GTP module:
+
+http://git.osmocom.org/libgtpnl/
+
+Protocol Versions
+=================
+
+There are two different versions of GTP-U: v0 [GSM TS 09.60] and v1
+[3GPP TS 29.281].  Both are implemented in the Kernel GTP module.
+Version 0 is a legacy version, and deprecated from recent 3GPP
+specifications.
+
+GTP-U uses UDP for transporting PDUs.  The receiving UDP port is 2151
+for GTPv1-U and 3386 for GTPv0-U.
+
+There are three versions of GTP-C: v0, v1, and v2.  As the kernel
+doesn't implement GTP-C, we don't have to worry about this.  It's the
+responsibility of the control plane implementation in userspace to
+implement that.
+
+IPv6
+====
+
+The 3GPP specifications indicate either IPv4 or IPv6 can be used both
+on the inner (user) IP layer, or on the outer (transport) layer.
+
+Unfortunately, the Kernel module currently supports IPv6 neither for
+the User IP payload, nor for the outer IP layer.  Patches or other
+Contributions to fix this are most welcome!
+
+Mailing List
+============
+
+If you have questions regarding how to use the Kernel GTP module from
+your own software, or want to contribute to the code, please use the
+osmocom-net-grps mailing list for related discussion. The list can be
+reached at osmocom-net-gprs@lists.osmocom.org and the mailman
+interface for managing your subscription is at
+https://lists.osmocom.org/mailman/listinfo/osmocom-net-gprs
+
+Issue Tracker
+=============
+
+The Osmocom project maintains an issue tracker for the Kernel GTP-U
+module at
+https://osmocom.org/projects/linux-kernel-gtp-u/issues
+
+History / Acknowledgements
+==========================
+
+The Module was originally created in 2012 by Harald Welte, but never
+completed.  Pablo came in to finish the mess Harald left behind.  But
+doe to a lack of user interest, it never got merged.
+
+In 2015, Andreas Schultz came to the rescue and fixed lots more bugs,
+extended it with new features and finally pushed all of us to get it
+mainline, where it was merged in 4.7.0.
+
+Architectural Details
+=====================
+
+Local GTP-U entity and tunnel identification
+--------------------------------------------
+
+GTP-U uses UDP for transporting PDU's. The receiving UDP port is 2152
+for GTPv1-U and 3386 for GTPv0-U.
+
+There is only one GTP-U entity (and therefor SGSN/GGSN/S-GW/PDN-GW
+instance) per IP address. Tunnel Endpoint Identifier (TEID) are unique
+per GTP-U entity.
+
+A specific tunnel is only defined by the destination entity. Since the
+destination port is constant, only the destination IP and TEID define
+a tunnel. The source IP and Port have no meaning for the tunnel.
+
+Therefore:
+
+  * when sending, the remote entity is defined by the remote IP and
+    the tunnel endpoint id. The source IP and port have no meaning and
+    can be changed at any time.
+
+  * when receiving the local entity is defined by the local
+    destination IP and the tunnel endpoint id. The source IP and port
+    have no meaning and can change at any time.
+
+[3GPP TS 29.281] Section 4.3.0 defines this so::
+
+  The TEID in the GTP-U header is used to de-multiplex traffic
+  incoming from remote tunnel endpoints so that it is delivered to the
+  User plane entities in a way that allows multiplexing of different
+  users, different packet protocols and different QoS levels.
+  Therefore no two remote GTP-U endpoints shall send traffic to a
+  GTP-U protocol entity using the same TEID value except
+  for data forwarding as part of mobility procedures.
+
+The definition above only defines that two remote GTP-U endpoints
+*should not* send to the same TEID, it *does not* forbid or exclude
+such a scenario. In fact, the mentioned mobility procedures make it
+necessary that the GTP-U entity accepts traffic for TEIDs from
+multiple or unknown peers.
+
+Therefore, the receiving side identifies tunnels exclusively based on
+TEIDs, not based on the source IP!
+
+APN vs. Network Device
+======================
+
+The GTP-U driver creates a Linux network device for each Gi/SGi
+interface.
+
+[3GPP TS 29.281] calls the Gi/SGi reference point an interface. This
+may lead to the impression that the GGSN/P-GW can have only one such
+interface.
+
+Correct is that the Gi/SGi reference point defines the interworking
+between +the 3GPP packet domain (PDN) based on GTP-U tunnel and IP
+based networks.
+
+There is no provision in any of the 3GPP documents that limits the
+number of Gi/SGi interfaces implemented by a GGSN/P-GW.
+
+[3GPP TS 29.061] Section 11.3 makes it clear that the selection of a
+specific Gi/SGi interfaces is made through the Access Point Name
+(APN)::
+
+  2. each private network manages its own addressing. In general this
+     will result in different private networks having overlapping
+     address ranges. A logically separate connection (e.g. an IP in IP
+     tunnel or layer 2 virtual circuit) is used between the GGSN/P-GW
+     and each private network.
+
+     In this case the IP address alone is not necessarily unique.  The
+     pair of values, Access Point Name (APN) and IPv4 address and/or
+     IPv6 prefixes, is unique.
+
+In order to support the overlapping address range use case, each APN
+is mapped to a separate Gi/SGi interface (network device).
+
+.. note::
+
+   The Access Point Name is purely a control plane (GTP-C) concept.
+   At the GTP-U level, only Tunnel Endpoint Identifiers are present in
+   GTP-U packets and network devices are known
+
+Therefore for a given UE the mapping in IP to PDN network is:
+
+  * network device + MS IP -> Peer IP + Peer TEID,
+
+and from PDN to IP network:
+
+  * local GTP-U IP + TEID  -> network device
+
+Furthermore, before a received T-PDU is injected into the network
+device the MS IP is checked against the IP recorded in PDP context.
diff --git a/Documentation/networking/gtp.txt b/Documentation/networking/gtp.txt
deleted file mode 100644
index 6966bbec1ecb..000000000000
--- a/Documentation/networking/gtp.txt
+++ /dev/null
@@ -1,230 +0,0 @@
-The Linux kernel GTP tunneling module
-======================================================================
-Documentation by Harald Welte <laforge@gnumonks.org> and
-                 Andreas Schultz <aschultz@tpip.net>
-
-In 'drivers/net/gtp.c' you are finding a kernel-level implementation
-of a GTP tunnel endpoint.
-
-== What is GTP ==
-
-GTP is the Generic Tunnel Protocol, which is a 3GPP protocol used for
-tunneling User-IP payload between a mobile station (phone, modem)
-and the interconnection between an external packet data network (such
-as the internet).
-
-So when you start a 'data connection' from your mobile phone, the
-phone will use the control plane to signal for the establishment of
-such a tunnel between that external data network and the phone.  The
-tunnel endpoints thus reside on the phone and in the gateway.  All
-intermediate nodes just transport the encapsulated packet.
-
-The phone itself does not implement GTP but uses some other
-technology-dependent protocol stack for transmitting the user IP
-payload, such as LLC/SNDCP/RLC/MAC.
-
-At some network element inside the cellular operator infrastructure
-(SGSN in case of GPRS/EGPRS or classic UMTS, hNodeB in case of a 3G
-femtocell, eNodeB in case of 4G/LTE), the cellular protocol stacking
-is translated into GTP *without breaking the end-to-end tunnel*.  So
-intermediate nodes just perform some specific relay function.
-
-At some point the GTP packet ends up on the so-called GGSN (GSM/UMTS)
-or P-GW (LTE), which terminates the tunnel, decapsulates the packet
-and forwards it onto an external packet data network.  This can be
-public internet, but can also be any private IP network (or even
-theoretically some non-IP network like X.25).
-
-You can find the protocol specification in 3GPP TS 29.060, available
-publicly via the 3GPP website at http://www.3gpp.org/DynaReport/29060.htm
-
-A direct PDF link to v13.6.0 is provided for convenience below:
-http://www.etsi.org/deliver/etsi_ts/129000_129099/129060/13.06.00_60/ts_129060v130600p.pdf
-
-== The Linux GTP tunnelling module ==
-
-The module implements the function of a tunnel endpoint, i.e. it is
-able to decapsulate tunneled IP packets in the uplink originated by
-the phone, and encapsulate raw IP packets received from the external
-packet network in downlink towards the phone.
-
-It *only* implements the so-called 'user plane', carrying the User-IP
-payload, called GTP-U.  It does not implement the 'control plane',
-which is a signaling protocol used for establishment and teardown of
-GTP tunnels (GTP-C).
-
-So in order to have a working GGSN/P-GW setup, you will need a
-userspace program that implements the GTP-C protocol and which then
-uses the netlink interface provided by the GTP-U module in the kernel
-to configure the kernel module.
-
-This split architecture follows the tunneling modules of other
-protocols, e.g. PPPoE or L2TP, where you also run a userspace daemon
-to handle the tunnel establishment, authentication etc. and only the
-data plane is accelerated inside the kernel.
-
-Don't be confused by terminology:  The GTP User Plane goes through
-kernel accelerated path, while the GTP Control Plane goes to
-Userspace :)
-
-The official homepage of the module is at
-https://osmocom.org/projects/linux-kernel-gtp-u/wiki
-
-== Userspace Programs with Linux Kernel GTP-U support ==
-
-At the time of this writing, there are at least two Free Software
-implementations that implement GTP-C and can use the netlink interface
-to make use of the Linux kernel GTP-U support:
-
-* OpenGGSN (classic 2G/3G GGSN in C):
-  https://osmocom.org/projects/openggsn/wiki/OpenGGSN
-
-* ergw (GGSN + P-GW in Erlang):
-  https://github.com/travelping/ergw
-
-== Userspace Library / Command Line Utilities ==
-
-There is a userspace library called 'libgtpnl' which is based on
-libmnl and which implements a C-language API towards the netlink
-interface provided by the Kernel GTP module:
-
-http://git.osmocom.org/libgtpnl/
-
-== Protocol Versions ==
-
-There are two different versions of GTP-U: v0 [GSM TS 09.60] and v1
-[3GPP TS 29.281].  Both are implemented in the Kernel GTP module.
-Version 0 is a legacy version, and deprecated from recent 3GPP
-specifications.
-
-GTP-U uses UDP for transporting PDUs.  The receiving UDP port is 2151
-for GTPv1-U and 3386 for GTPv0-U.
-
-There are three versions of GTP-C: v0, v1, and v2.  As the kernel
-doesn't implement GTP-C, we don't have to worry about this.  It's the
-responsibility of the control plane implementation in userspace to
-implement that.
-
-== IPv6 ==
-
-The 3GPP specifications indicate either IPv4 or IPv6 can be used both
-on the inner (user) IP layer, or on the outer (transport) layer.
-
-Unfortunately, the Kernel module currently supports IPv6 neither for
-the User IP payload, nor for the outer IP layer.  Patches or other
-Contributions to fix this are most welcome!
-
-== Mailing List ==
-
-If yo have questions regarding how to use the Kernel GTP module from
-your own software, or want to contribute to the code, please use the
-osmocom-net-grps mailing list for related discussion. The list can be
-reached at osmocom-net-gprs@lists.osmocom.org and the mailman
-interface for managing your subscription is at
-https://lists.osmocom.org/mailman/listinfo/osmocom-net-gprs
-
-== Issue Tracker ==
-
-The Osmocom project maintains an issue tracker for the Kernel GTP-U
-module at
-https://osmocom.org/projects/linux-kernel-gtp-u/issues
-
-== History / Acknowledgements ==
-
-The Module was originally created in 2012 by Harald Welte, but never
-completed.  Pablo came in to finish the mess Harald left behind.  But
-doe to a lack of user interest, it never got merged.
-
-In 2015, Andreas Schultz came to the rescue and fixed lots more bugs,
-extended it with new features and finally pushed all of us to get it
-mainline, where it was merged in 4.7.0.
-
-== Architectural Details ==
-
-=== Local GTP-U entity and tunnel identification ===
-
-GTP-U uses UDP for transporting PDU's. The receiving UDP port is 2152
-for GTPv1-U and 3386 for GTPv0-U.
-
-There is only one GTP-U entity (and therefor SGSN/GGSN/S-GW/PDN-GW
-instance) per IP address. Tunnel Endpoint Identifier (TEID) are unique
-per GTP-U entity.
-
-A specific tunnel is only defined by the destination entity. Since the
-destination port is constant, only the destination IP and TEID define
-a tunnel. The source IP and Port have no meaning for the tunnel.
-
-Therefore:
-
-  * when sending, the remote entity is defined by the remote IP and
-    the tunnel endpoint id. The source IP and port have no meaning and
-    can be changed at any time.
-
-  * when receiving the local entity is defined by the local
-    destination IP and the tunnel endpoint id. The source IP and port
-    have no meaning and can change at any time.
-
-[3GPP TS 29.281] Section 4.3.0 defines this so:
-
-> The TEID in the GTP-U header is used to de-multiplex traffic
-> incoming from remote tunnel endpoints so that it is delivered to the
-> User plane entities in a way that allows multiplexing of different
-> users, different packet protocols and different QoS levels.
-> Therefore no two remote GTP-U endpoints shall send traffic to a
-> GTP-U protocol entity using the same TEID value except
-> for data forwarding as part of mobility procedures.
-
-The definition above only defines that two remote GTP-U endpoints
-*should not* send to the same TEID, it *does not* forbid or exclude
-such a scenario. In fact, the mentioned mobility procedures make it
-necessary that the GTP-U entity accepts traffic for TEIDs from
-multiple or unknown peers.
-
-Therefore, the receiving side identifies tunnels exclusively based on
-TEIDs, not based on the source IP!
-
-== APN vs. Network Device ==
-
-The GTP-U driver creates a Linux network device for each Gi/SGi
-interface.
-
-[3GPP TS 29.281] calls the Gi/SGi reference point an interface. This
-may lead to the impression that the GGSN/P-GW can have only one such
-interface.
-
-Correct is that the Gi/SGi reference point defines the interworking
-between +the 3GPP packet domain (PDN) based on GTP-U tunnel and IP
-based networks.
-
-There is no provision in any of the 3GPP documents that limits the
-number of Gi/SGi interfaces implemented by a GGSN/P-GW.
-
-[3GPP TS 29.061] Section 11.3 makes it clear that the selection of a
-specific Gi/SGi interfaces is made through the Access Point Name
-(APN):
-
-> 2. each private network manages its own addressing. In general this
->    will result in different private networks having overlapping
->    address ranges. A logically separate connection (e.g. an IP in IP
->    tunnel or layer 2 virtual circuit) is used between the GGSN/P-GW
->    and each private network.
->
->    In this case the IP address alone is not necessarily unique.  The
->    pair of values, Access Point Name (APN) and IPv4 address and/or
->    IPv6 prefixes, is unique.
-
-In order to support the overlapping address range use case, each APN
-is mapped to a separate Gi/SGi interface (network device).
-
-NOTE: The Access Point Name is purely a control plane (GTP-C) concept.
-At the GTP-U level, only Tunnel Endpoint Identifiers are present in
-GTP-U packets and network devices are known
-
-Therefore for a given UE the mapping in IP to PDN network is:
-  * network device + MS IP -> Peer IP + Peer TEID,
-
-and from PDN to IP network:
-  * local GTP-U IP + TEID  -> network device
-
-Furthermore, before a received T-PDU is injected into the network
-device the MS IP is checked against the IP recorded in PDP context.
diff --git a/Documentation/networking/hinic.rst b/Documentation/networking/hinic.rst
new file mode 100644
index 000000000000..867ac8f4e04a
--- /dev/null
+++ b/Documentation/networking/hinic.rst
@@ -0,0 +1,128 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+Linux Kernel Driver for Huawei Intelligent NIC(HiNIC) family
+============================================================
+
+Overview:
+=========
+HiNIC is a network interface card for the Data Center Area.
+
+The driver supports a range of link-speed devices (10GbE, 25GbE, 40GbE, etc.).
+The driver supports also a negotiated and extendable feature set.
+
+Some HiNIC devices support SR-IOV. This driver is used for Physical Function
+(PF).
+
+HiNIC devices support MSI-X interrupt vector for each Tx/Rx queue and
+adaptive interrupt moderation.
+
+HiNIC devices support also various offload features such as checksum offload,
+TCP Transmit Segmentation Offload(TSO), Receive-Side Scaling(RSS) and
+LRO(Large Receive Offload).
+
+
+Supported PCI vendor ID/device IDs:
+===================================
+
+19e5:1822 - HiNIC PF
+
+
+Driver Architecture and Source Code:
+====================================
+
+hinic_dev - Implement a Logical Network device that is independent from
+specific HW details about HW data structure formats.
+
+hinic_hwdev - Implement the HW details of the device and include the components
+for accessing the PCI NIC.
+
+hinic_hwdev contains the following components:
+===============================================
+
+HW Interface:
+=============
+
+The interface for accessing the pci device (DMA memory and PCI BARs).
+(hinic_hw_if.c, hinic_hw_if.h)
+
+Configuration Status Registers Area that describes the HW Registers on the
+configuration and status BAR0. (hinic_hw_csr.h)
+
+MGMT components:
+================
+
+Asynchronous Event Queues(AEQs) - The event queues for receiving messages from
+the MGMT modules on the cards. (hinic_hw_eqs.c, hinic_hw_eqs.h)
+
+Application Programmable Interface commands(API CMD) - Interface for sending
+MGMT commands to the card. (hinic_hw_api_cmd.c, hinic_hw_api_cmd.h)
+
+Management (MGMT) - the PF to MGMT channel that uses API CMD for sending MGMT
+commands to the card and receives notifications from the MGMT modules on the
+card by AEQs. Also set the addresses of the IO CMDQs in HW.
+(hinic_hw_mgmt.c, hinic_hw_mgmt.h)
+
+IO components:
+==============
+
+Completion Event Queues(CEQs) - The completion Event Queues that describe IO
+tasks that are finished. (hinic_hw_eqs.c, hinic_hw_eqs.h)
+
+Work Queues(WQ) - Contain the memory and operations for use by CMD queues and
+the Queue Pairs. The WQ is a Memory Block in a Page. The Block contains
+pointers to Memory Areas that are the Memory for the Work Queue Elements(WQEs).
+(hinic_hw_wq.c, hinic_hw_wq.h)
+
+Command Queues(CMDQ) - The queues for sending commands for IO management and is
+used to set the QPs addresses in HW. The commands completion events are
+accumulated on the CEQ that is configured to receive the CMDQ completion events.
+(hinic_hw_cmdq.c, hinic_hw_cmdq.h)
+
+Queue Pairs(QPs) - The HW Receive and Send queues for Receiving and Transmitting
+Data. (hinic_hw_qp.c, hinic_hw_qp.h, hinic_hw_qp_ctxt.h)
+
+IO - de/constructs all the IO components. (hinic_hw_io.c, hinic_hw_io.h)
+
+HW device:
+==========
+
+HW device - de/constructs the HW Interface, the MGMT components on the
+initialization of the driver and the IO components on the case of Interface
+UP/DOWN Events. (hinic_hw_dev.c, hinic_hw_dev.h)
+
+
+hinic_dev contains the following components:
+===============================================
+
+PCI ID table - Contains the supported PCI Vendor/Device IDs.
+(hinic_pci_tbl.h)
+
+Port Commands - Send commands to the HW device for port management
+(MAC, Vlan, MTU, ...). (hinic_port.c, hinic_port.h)
+
+Tx Queues - Logical Tx Queues that use the HW Send Queues for transmit.
+The Logical Tx queue is not dependent on the format of the HW Send Queue.
+(hinic_tx.c, hinic_tx.h)
+
+Rx Queues - Logical Rx Queues that use the HW Receive Queues for receive.
+The Logical Rx queue is not dependent on the format of the HW Receive Queue.
+(hinic_rx.c, hinic_rx.h)
+
+hinic_dev - de/constructs the Logical Tx and Rx Queues.
+(hinic_main.c, hinic_dev.h)
+
+
+Miscellaneous
+=============
+
+Common functions that are used by HW and Logical Device.
+(hinic_common.c, hinic_common.h)
+
+
+Support
+=======
+
+If an issue is identified with the released source code on the supported kernel
+with a supported adapter, email the specific information related to the issue to
+aviad.krawczyk@huawei.com.
diff --git a/Documentation/networking/hinic.txt b/Documentation/networking/hinic.txt
deleted file mode 100644
index 989366a4039c..000000000000
--- a/Documentation/networking/hinic.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-Linux Kernel Driver for Huawei Intelligent NIC(HiNIC) family
-============================================================
-
-Overview:
-=========
-HiNIC is a network interface card for the Data Center Area.
-
-The driver supports a range of link-speed devices (10GbE, 25GbE, 40GbE, etc.).
-The driver supports also a negotiated and extendable feature set.
-
-Some HiNIC devices support SR-IOV. This driver is used for Physical Function
-(PF).
-
-HiNIC devices support MSI-X interrupt vector for each Tx/Rx queue and
-adaptive interrupt moderation.
-
-HiNIC devices support also various offload features such as checksum offload,
-TCP Transmit Segmentation Offload(TSO), Receive-Side Scaling(RSS) and
-LRO(Large Receive Offload).
-
-
-Supported PCI vendor ID/device IDs:
-===================================
-
-19e5:1822 - HiNIC PF
-
-
-Driver Architecture and Source Code:
-====================================
-
-hinic_dev - Implement a Logical Network device that is independent from
-specific HW details about HW data structure formats.
-
-hinic_hwdev - Implement the HW details of the device and include the components
-for accessing the PCI NIC.
-
-hinic_hwdev contains the following components:
-===============================================
-
-HW Interface:
-=============
-
-The interface for accessing the pci device (DMA memory and PCI BARs).
-(hinic_hw_if.c, hinic_hw_if.h)
-
-Configuration Status Registers Area that describes the HW Registers on the
-configuration and status BAR0. (hinic_hw_csr.h)
-
-MGMT components:
-================
-
-Asynchronous Event Queues(AEQs) - The event queues for receiving messages from
-the MGMT modules on the cards. (hinic_hw_eqs.c, hinic_hw_eqs.h)
-
-Application Programmable Interface commands(API CMD) - Interface for sending
-MGMT commands to the card. (hinic_hw_api_cmd.c, hinic_hw_api_cmd.h)
-
-Management (MGMT) - the PF to MGMT channel that uses API CMD for sending MGMT
-commands to the card and receives notifications from the MGMT modules on the
-card by AEQs. Also set the addresses of the IO CMDQs in HW.
-(hinic_hw_mgmt.c, hinic_hw_mgmt.h)
-
-IO components:
-==============
-
-Completion Event Queues(CEQs) - The completion Event Queues that describe IO
-tasks that are finished. (hinic_hw_eqs.c, hinic_hw_eqs.h)
-
-Work Queues(WQ) - Contain the memory and operations for use by CMD queues and
-the Queue Pairs. The WQ is a Memory Block in a Page. The Block contains
-pointers to Memory Areas that are the Memory for the Work Queue Elements(WQEs).
-(hinic_hw_wq.c, hinic_hw_wq.h)
-
-Command Queues(CMDQ) - The queues for sending commands for IO management and is
-used to set the QPs addresses in HW. The commands completion events are
-accumulated on the CEQ that is configured to receive the CMDQ completion events.
-(hinic_hw_cmdq.c, hinic_hw_cmdq.h)
-
-Queue Pairs(QPs) - The HW Receive and Send queues for Receiving and Transmitting
-Data. (hinic_hw_qp.c, hinic_hw_qp.h, hinic_hw_qp_ctxt.h)
-
-IO - de/constructs all the IO components. (hinic_hw_io.c, hinic_hw_io.h)
-
-HW device:
-==========
-
-HW device - de/constructs the HW Interface, the MGMT components on the
-initialization of the driver and the IO components on the case of Interface
-UP/DOWN Events. (hinic_hw_dev.c, hinic_hw_dev.h)
-
-
-hinic_dev contains the following components:
-===============================================
-
-PCI ID table - Contains the supported PCI Vendor/Device IDs.
-(hinic_pci_tbl.h)
-
-Port Commands - Send commands to the HW device for port management
-(MAC, Vlan, MTU, ...). (hinic_port.c, hinic_port.h)
-
-Tx Queues - Logical Tx Queues that use the HW Send Queues for transmit.
-The Logical Tx queue is not dependent on the format of the HW Send Queue.
-(hinic_tx.c, hinic_tx.h)
-
-Rx Queues - Logical Rx Queues that use the HW Receive Queues for receive.
-The Logical Rx queue is not dependent on the format of the HW Receive Queue.
-(hinic_rx.c, hinic_rx.h)
-
-hinic_dev - de/constructs the Logical Tx and Rx Queues.
-(hinic_main.c, hinic_dev.h)
-
-
-Miscellaneous:
-=============
-
-Common functions that are used by HW and Logical Device.
-(hinic_common.c, hinic_common.h)
-
-
-Support
-=======
-
-If an issue is identified with the released source code on the supported kernel
-with a supported adapter, email the specific information related to the issue to
-aviad.krawczyk@huawei.com.
diff --git a/Documentation/networking/ila.rst b/Documentation/networking/ila.rst
new file mode 100644
index 000000000000..5ac0a6270b17
--- /dev/null
+++ b/Documentation/networking/ila.rst
@@ -0,0 +1,296 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+Identifier Locator Addressing (ILA)
+===================================
+
+
+Introduction
+============
+
+Identifier-locator addressing (ILA) is a technique used with IPv6 that
+differentiates between location and identity of a network node. Part of an
+address expresses the immutable identity of the node, and another part
+indicates the location of the node which can be dynamic. Identifier-locator
+addressing can be used to efficiently implement overlay networks for
+network virtualization as well as solutions for use cases in mobility.
+
+ILA can be thought of as means to implement an overlay network without
+encapsulation. This is accomplished by performing network address
+translation on destination addresses as a packet traverses a network. To
+the network, an ILA translated packet appears to be no different than any
+other IPv6 packet. For instance, if the transport protocol is TCP then an
+ILA translated packet looks like just another TCP/IPv6 packet. The
+advantage of this is that ILA is transparent to the network so that
+optimizations in the network, such as ECMP, RSS, GRO, GSO, etc., just work.
+
+The ILA protocol is described in Internet-Draft draft-herbert-intarea-ila.
+
+
+ILA terminology
+===============
+
+  - Identifier
+		A number that identifies an addressable node in the network
+		independent of its location. ILA identifiers are sixty-four
+		bit values.
+
+  - Locator
+		A network prefix that routes to a physical host. Locators
+		provide the topological location of an addressed node. ILA
+		locators are sixty-four bit prefixes.
+
+  - ILA mapping
+		A mapping of an ILA identifier to a locator (or to a
+		locator and meta data). An ILA domain maintains a database
+		that contains mappings for all destinations in the domain.
+
+  - SIR address
+		An IPv6 address composed of a SIR prefix (upper sixty-
+		four bits) and an identifier (lower sixty-four bits).
+		SIR addresses are visible to applications and provide a
+		means for them to address nodes independent of their
+		location.
+
+  - ILA address
+		An IPv6 address composed of a locator (upper sixty-four
+		bits) and an identifier (low order sixty-four bits). ILA
+		addresses are never visible to an application.
+
+  - ILA host
+		An end host that is capable of performing ILA translations
+		on transmit or receive.
+
+  - ILA router
+		A network node that performs ILA translation and forwarding
+		of translated packets.
+
+  - ILA forwarding cache
+		A type of ILA router that only maintains a working set
+		cache of mappings.
+
+  - ILA node
+		A network node capable of performing ILA translations. This
+		can be an ILA router, ILA forwarding cache, or ILA host.
+
+
+Operation
+=========
+
+There are two fundamental operations with ILA:
+
+  - Translate a SIR address to an ILA address. This is performed on ingress
+    to an ILA overlay.
+
+  - Translate an ILA address to a SIR address. This is performed on egress
+    from the ILA overlay.
+
+ILA can be deployed either on end hosts or intermediate devices in the
+network; these are provided by "ILA hosts" and "ILA routers" respectively.
+Configuration and datapath for these two points of deployment is somewhat
+different.
+
+The diagram below illustrates the flow of packets through ILA as well
+as showing ILA hosts and routers::
+
+    +--------+                                                +--------+
+    | Host A +-+                                         +--->| Host B |
+    |        | |              (2) ILA                   (')   |        |
+    +--------+ |            ...addressed....           (   )  +--------+
+	       V  +---+--+  .  packet      .  +---+--+  (_)
+   (1) SIR     |  | ILA  |----->-------->---->| ILA  |   |   (3) SIR
+    addressed  +->|router|  .              .  |router|->-+    addressed
+    packet        +---+--+  .     IPv6     .  +---+--+        packet
+		   /        .    Network   .
+		  /         .              .   +--+-++--------+
+    +--------+   /          .              .   |ILA ||  Host  |
+    |  Host  +--+           .              .- -|host||        |
+    |        |              .              .   +--+-++--------+
+    +--------+              ................
+
+
+Transport checksum handling
+===========================
+
+When an address is translated by ILA, an encapsulated transport checksum
+that includes the translated address in a pseudo header may be rendered
+incorrect on the wire. This is a problem for intermediate devices,
+including checksum offload in NICs, that process the checksum. There are
+three options to deal with this:
+
+- no action	Allow the checksum to be incorrect on the wire. Before
+		a receiver verifies a checksum the ILA to SIR address
+		translation must be done.
+
+- adjust transport checksum
+		When ILA translation is performed the packet is parsed
+		and if a transport layer checksum is found then it is
+		adjusted to reflect the correct checksum per the
+		translated address.
+
+- checksum neutral mapping
+		When an address is translated the difference can be offset
+		elsewhere in a part of the packet that is covered by
+		the checksum. The low order sixteen bits of the identifier
+		are used. This method is preferred since it doesn't require
+		parsing a packet beyond the IP header and in most cases the
+		adjustment can be precomputed and saved with the mapping.
+
+Note that the checksum neutral adjustment affects the low order sixteen
+bits of the identifier. When ILA to SIR address translation is done on
+egress the low order bits are restored to the original value which
+restores the identifier as it was originally sent.
+
+
+Identifier types
+================
+
+ILA defines different types of identifiers for different use cases.
+
+The defined types are:
+
+      0: interface identifier
+
+      1: locally unique identifier
+
+      2: virtual networking identifier for IPv4 address
+
+      3: virtual networking identifier for IPv6 unicast address
+
+      4: virtual networking identifier for IPv6 multicast address
+
+      5: non-local address identifier
+
+In the current implementation of kernel ILA only locally unique identifiers
+(LUID) are supported. LUID allows for a generic, unformatted 64 bit
+identifier.
+
+
+Identifier formats
+==================
+
+Kernel ILA supports two optional fields in an identifier for formatting:
+"C-bit" and "identifier type". The presence of these fields is determined
+by configuration as demonstrated below.
+
+If the identifier type is present it occupies the three highest order
+bits of an identifier. The possible values are given in the above list.
+
+If the C-bit is present,  this is used as an indication that checksum
+neutral mapping has been done. The C-bit can only be set in an
+ILA address, never a SIR address.
+
+In the simplest format the identifier types, C-bit, and checksum
+adjustment value are not present so an identifier is considered an
+unstructured sixty-four bit value::
+
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     |                            Identifier                         |
+     +                                                               +
+     |                                                               |
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+The checksum neutral adjustment may be configured to always be
+present using neutral-map-auto. In this case there is no C-bit, but the
+checksum adjustment is in the low order 16 bits. The identifier is
+still sixty-four bits::
+
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     |                            Identifier                         |
+     |                               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     |                               |  Checksum-neutral adjustment  |
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+The C-bit may used to explicitly indicate that checksum neutral
+mapping has been applied to an ILA address. The format is::
+
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     |     |C|                    Identifier                         |
+     |     +-+                       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     |                               |  Checksum-neutral adjustment  |
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+The identifier type field may be present to indicate the identifier
+type. If it is not present then the type is inferred based on mapping
+configuration. The checksum neutral adjustment may automatically
+used with the identifier type as illustrated below::
+
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     | Type|                      Identifier                         |
+     +-+-+-+                         +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     |                               |  Checksum-neutral adjustment  |
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+If the identifier type and the C-bit can be present simultaneously so
+the identifier format would be::
+
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     | Type|C|                    Identifier                         |
+     +-+-+-+-+                       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     |                               |  Checksum-neutral adjustment  |
+     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+
+Configuration
+=============
+
+There are two methods to configure ILA mappings. One is by using LWT routes
+and the other is ila_xlat (called from NFHOOK PREROUTING hook). ila_xlat
+is intended to be used in the receive path for ILA hosts .
+
+An ILA router has also been implemented in XDP. Description of that is
+outside the scope of this document.
+
+The usage of for ILA LWT routes is:
+
+ip route add DEST/128 encap ila LOC csum-mode MODE ident-type TYPE via ADDR
+
+Destination (DEST) can either be a SIR address (for an ILA host or ingress
+ILA router) or an ILA address (egress ILA router). LOC is the sixty-four
+bit locator (with format W:X:Y:Z) that overwrites the upper sixty-four
+bits of the destination address.  Checksum MODE is one of "no-action",
+"adj-transport", "neutral-map", and "neutral-map-auto". If neutral-map is
+set then the C-bit will be present. Identifier TYPE one of "luid" or
+"use-format." In the case of use-format, the identifier type field is
+present and the effective type is taken from that.
+
+The usage of ila_xlat is:
+
+ip ila add loc_match MATCH loc LOC csum-mode MODE ident-type TYPE
+
+MATCH indicates the incoming locator that must be matched to apply
+a the translaiton. LOC is the locator that overwrites the upper
+sixty-four bits of the destination address. MODE and TYPE have the
+same meanings as described above.
+
+
+Some examples
+=============
+
+::
+
+     # Configure an ILA route that uses checksum neutral mapping as well
+     # as type field. Note that the type field is set in the SIR address
+     # (the 2000 implies type is 1 which is LUID).
+     ip route add 3333:0:0:1:2000:0:1:87/128 encap ila 2001:0:87:0 \
+	  csum-mode neutral-map ident-type use-format
+
+     # Configure an ILA LWT route that uses auto checksum neutral mapping
+     # (no C-bit) and configure identifier type to be LUID so that the
+     # identifier type field will not be present.
+     ip route add 3333:0:0:1:2000:0:2:87/128 encap ila 2001:0:87:1 \
+	  csum-mode neutral-map-auto ident-type luid
+
+     ila_xlat configuration
+
+     # Configure an ILA to SIR mapping that matches a locator and overwrites
+     # it with a SIR address (3333:0:0:1 in this example). The C-bit and
+     # identifier field are used.
+     ip ila add loc_match 2001:0:119:0 loc 3333:0:0:1 \
+	 csum-mode neutral-map-auto ident-type use-format
+
+     # Configure an ILA to SIR mapping where checksum neutral is automatically
+     # set without the C-bit and the identifier type is configured to be LUID
+     # so that the identifier type field is not present.
+     ip ila add loc_match 2001:0:119:0 loc 3333:0:0:1 \
+	 csum-mode neutral-map-auto ident-type use-format
diff --git a/Documentation/networking/ila.txt b/Documentation/networking/ila.txt
deleted file mode 100644
index a17dac9dc915..000000000000
--- a/Documentation/networking/ila.txt
+++ /dev/null
@@ -1,285 +0,0 @@
-Identifier Locator Addressing (ILA)
-
-
-Introduction
-============
-
-Identifier-locator addressing (ILA) is a technique used with IPv6 that
-differentiates between location and identity of a network node. Part of an
-address expresses the immutable identity of the node, and another part
-indicates the location of the node which can be dynamic. Identifier-locator
-addressing can be used to efficiently implement overlay networks for
-network virtualization as well as solutions for use cases in mobility.
-
-ILA can be thought of as means to implement an overlay network without
-encapsulation. This is accomplished by performing network address
-translation on destination addresses as a packet traverses a network. To
-the network, an ILA translated packet appears to be no different than any
-other IPv6 packet. For instance, if the transport protocol is TCP then an
-ILA translated packet looks like just another TCP/IPv6 packet. The
-advantage of this is that ILA is transparent to the network so that
-optimizations in the network, such as ECMP, RSS, GRO, GSO, etc., just work.
-
-The ILA protocol is described in Internet-Draft draft-herbert-intarea-ila.
-
-
-ILA terminology
-===============
-
-  - Identifier	A number that identifies an addressable node in the network
-		independent of its location. ILA identifiers are sixty-four
-		bit values.
-
-  - Locator	A network prefix that routes to a physical host. Locators
-		provide the topological location of an addressed node. ILA
-		locators are sixty-four bit prefixes.
-
-  - ILA mapping
-		A mapping of an ILA identifier to a locator (or to a
-		locator and meta data). An ILA domain maintains a database
-		that contains mappings for all destinations in the domain.
-
-  - SIR address
-		An IPv6 address composed of a SIR prefix (upper sixty-
-		four bits) and an identifier (lower sixty-four bits).
-		SIR addresses are visible to applications and provide a
-		means for them to address nodes independent of their
-		location.
-
-  - ILA address
-		An IPv6 address composed of a locator (upper sixty-four
-		bits) and an identifier (low order sixty-four bits). ILA
-		addresses are never visible to an application.
-
-  - ILA host	An end host that is capable of performing ILA translations
-		on transmit or receive.
-
-  - ILA router	A network node that performs ILA translation and forwarding
-		of translated packets.
-
-  - ILA forwarding cache
-		A type of ILA router that only maintains a working set
-		cache of mappings.
-
-  - ILA node	A network node capable of performing ILA translations. This
-		can be an ILA router, ILA forwarding cache, or ILA host.
-
-
-Operation
-=========
-
-There are two fundamental operations with ILA:
-
-  - Translate a SIR address to an ILA address. This is performed on ingress
-    to an ILA overlay.
-
-  - Translate an ILA address to a SIR address. This is performed on egress
-    from the ILA overlay.
-
-ILA can be deployed either on end hosts or intermediate devices in the
-network; these are provided by "ILA hosts" and "ILA routers" respectively.
-Configuration and datapath for these two points of deployment is somewhat
-different.
-
-The diagram below illustrates the flow of packets through ILA as well
-as showing ILA hosts and routers.
-
-    +--------+                                                +--------+
-    | Host A +-+                                         +--->| Host B |
-    |        | |              (2) ILA                   (')   |        |
-    +--------+ |            ...addressed....           (   )  +--------+
-               V  +---+--+  .  packet      .  +---+--+  (_)
-   (1) SIR     |  | ILA  |----->-------->---->| ILA  |   |   (3) SIR
-    addressed  +->|router|  .              .  |router|->-+    addressed
-    packet        +---+--+  .     IPv6     .  +---+--+        packet
-                   /        .    Network   .
-                  /         .              .   +--+-++--------+
-    +--------+   /          .              .   |ILA ||  Host  |
-    |  Host  +--+           .              .- -|host||        |
-    |        |              .              .   +--+-++--------+
-    +--------+              ................
-
-
-Transport checksum handling
-===========================
-
-When an address is translated by ILA, an encapsulated transport checksum
-that includes the translated address in a pseudo header may be rendered
-incorrect on the wire. This is a problem for intermediate devices,
-including checksum offload in NICs, that process the checksum. There are
-three options to deal with this:
-
-- no action	Allow the checksum to be incorrect on the wire. Before
-		a receiver verifies a checksum the ILA to SIR address
-		translation must be done.
-
-- adjust transport checksum
-		When ILA translation is performed the packet is parsed
-		and if a transport layer checksum is found then it is
-		adjusted to reflect the correct checksum per the
-		translated address.
-
-- checksum neutral mapping
-		When an address is translated the difference can be offset
-		elsewhere in a part of the packet that is covered by
-		the checksum. The low order sixteen bits of the identifier
-		are used. This method is preferred since it doesn't require
-		parsing a packet beyond the IP header and in most cases the
-		adjustment can be precomputed and saved with the mapping.
-
-Note that the checksum neutral adjustment affects the low order sixteen
-bits of the identifier. When ILA to SIR address translation is done on
-egress the low order bits are restored to the original value which
-restores the identifier as it was originally sent.
-
-
-Identifier types
-================
-
-ILA defines different types of identifiers for different use cases.
-
-The defined types are:
-
-      0: interface identifier
-
-      1: locally unique identifier
-
-      2: virtual networking identifier for IPv4 address
-
-      3: virtual networking identifier for IPv6 unicast address
-
-      4: virtual networking identifier for IPv6 multicast address
-
-      5: non-local address identifier
-
-In the current implementation of kernel ILA only locally unique identifiers
-(LUID) are supported. LUID allows for a generic, unformatted 64 bit
-identifier.
-
-
-Identifier formats
-==================
-
-Kernel ILA supports two optional fields in an identifier for formatting:
-"C-bit" and "identifier type". The presence of these fields is determined
-by configuration as demonstrated below.
-
-If the identifier type is present it occupies the three highest order
-bits of an identifier. The possible values are given in the above list.
-
-If the C-bit is present,  this is used as an indication that checksum
-neutral mapping has been done. The C-bit can only be set in an
-ILA address, never a SIR address.
-
-In the simplest format the identifier types, C-bit, and checksum
-adjustment value are not present so an identifier is considered an
-unstructured sixty-four bit value.
-
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |                            Identifier                         |
-     +                                                               +
-     |                                                               |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-The checksum neutral adjustment may be configured to always be
-present using neutral-map-auto. In this case there is no C-bit, but the
-checksum adjustment is in the low order 16 bits. The identifier is
-still sixty-four bits.
-
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |                            Identifier                         |
-     |                               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |                               |  Checksum-neutral adjustment  |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-The C-bit may used to explicitly indicate that checksum neutral
-mapping has been applied to an ILA address. The format is:
-
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |     |C|                    Identifier                         |
-     |     +-+                       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |                               |  Checksum-neutral adjustment  |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-The identifier type field may be present to indicate the identifier
-type. If it is not present then the type is inferred based on mapping
-configuration. The checksum neutral adjustment may automatically
-used with the identifier type as illustrated below.
-
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     | Type|                      Identifier                         |
-     +-+-+-+                         +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |                               |  Checksum-neutral adjustment  |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-If the identifier type and the C-bit can be present simultaneously so
-the identifier format would be:
-
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     | Type|C|                    Identifier                         |
-     +-+-+-+-+                       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |                               |  Checksum-neutral adjustment  |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-
-Configuration
-=============
-
-There are two methods to configure ILA mappings. One is by using LWT routes
-and the other is ila_xlat (called from NFHOOK PREROUTING hook). ila_xlat
-is intended to be used in the receive path for ILA hosts .
-
-An ILA router has also been implemented in XDP. Description of that is
-outside the scope of this document.
-
-The usage of for ILA LWT routes is:
-
-ip route add DEST/128 encap ila LOC csum-mode MODE ident-type TYPE via ADDR
-
-Destination (DEST) can either be a SIR address (for an ILA host or ingress
-ILA router) or an ILA address (egress ILA router). LOC is the sixty-four
-bit locator (with format W:X:Y:Z) that overwrites the upper sixty-four
-bits of the destination address.  Checksum MODE is one of "no-action",
-"adj-transport", "neutral-map", and "neutral-map-auto". If neutral-map is
-set then the C-bit will be present. Identifier TYPE one of "luid" or
-"use-format." In the case of use-format, the identifier type field is
-present and the effective type is taken from that.
-
-The usage of ila_xlat is:
-
-ip ila add loc_match MATCH loc LOC csum-mode MODE ident-type TYPE
-
-MATCH indicates the incoming locator that must be matched to apply
-a the translaiton. LOC is the locator that overwrites the upper
-sixty-four bits of the destination address. MODE and TYPE have the
-same meanings as described above.
-
-
-Some examples
-=============
-
-# Configure an ILA route that uses checksum neutral mapping as well
-# as type field. Note that the type field is set in the SIR address
-# (the 2000 implies type is 1 which is LUID).
-ip route add 3333:0:0:1:2000:0:1:87/128 encap ila 2001:0:87:0 \
-     csum-mode neutral-map ident-type use-format
-
-# Configure an ILA LWT route that uses auto checksum neutral mapping
-# (no C-bit) and configure identifier type to be LUID so that the
-# identifier type field will not be present.
-ip route add 3333:0:0:1:2000:0:2:87/128 encap ila 2001:0:87:1 \
-     csum-mode neutral-map-auto ident-type luid
-
-ila_xlat configuration
-
-# Configure an ILA to SIR mapping that matches a locator and overwrites
-# it with a SIR address (3333:0:0:1 in this example). The C-bit and
-# identifier field are used.
-ip ila add loc_match 2001:0:119:0 loc 3333:0:0:1 \
-    csum-mode neutral-map-auto ident-type use-format
-
-# Configure an ILA to SIR mapping where checksum neutral is automatically
-# set without the C-bit and the identifier type is configured to be LUID
-# so that the identifier type field is not present.
-ip ila add loc_match 2001:0:119:0 loc 3333:0:0:1 \
-    csum-mode neutral-map-auto ident-type use-format
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index 6538ede29661..e1ff08b94d90 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -15,6 +15,7 @@ Contents:
    device_drivers/index
    dsa/index
    devlink/index
+   caif/index
    ethtool-netlink
    ieee802154
    j1939
@@ -36,6 +37,43 @@ Contents:
    tls-offload
    nfc
    6lowpan
+   6pack
+   altera_tse
+   arcnet-hardware
+   arcnet
+   atm
+   ax25
+   baycom
+   bonding
+   cdc_mbim
+   cops
+   cxacru
+   dccp
+   dctcp
+   decnet
+   defza
+   dns_resolver
+   driver
+   eql
+   fib_trie
+   filter
+   fore200e
+   framerelay
+   generic-hdlc
+   generic_netlink
+   gen_stats
+   gtp
+   hinic
+   ila
+   ipddp
+   ip_dynaddr
+   iphase
+   ipsec
+   ip-sysctl
+   ipv6
+   ipvlan
+   ipvs-sysctl
+   kcm
 
 .. only::  subproject and html
 
diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
new file mode 100644
index 000000000000..38f811d4b2f0
--- /dev/null
+++ b/Documentation/networking/ip-sysctl.rst
@@ -0,0 +1,2649 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========
+IP Sysctl
+=========
+
+/proc/sys/net/ipv4/* Variables
+==============================
+
+ip_forward - BOOLEAN
+	- 0 - disabled (default)
+	- not 0 - enabled
+
+	Forward Packets between interfaces.
+
+	This variable is special, its change resets all configuration
+	parameters to their default state (RFC1122 for hosts, RFC1812
+	for routers)
+
+ip_default_ttl - INTEGER
+	Default value of TTL field (Time To Live) for outgoing (but not
+	forwarded) IP packets. Should be between 1 and 255 inclusive.
+	Default: 64 (as recommended by RFC1700)
+
+ip_no_pmtu_disc - INTEGER
+	Disable Path MTU Discovery. If enabled in mode 1 and a
+	fragmentation-required ICMP is received, the PMTU to this
+	destination will be set to min_pmtu (see below). You will need
+	to raise min_pmtu to the smallest interface MTU on your system
+	manually if you want to avoid locally generated fragments.
+
+	In mode 2 incoming Path MTU Discovery messages will be
+	discarded. Outgoing frames are handled the same as in mode 1,
+	implicitly setting IP_PMTUDISC_DONT on every created socket.
+
+	Mode 3 is a hardened pmtu discover mode. The kernel will only
+	accept fragmentation-needed errors if the underlying protocol
+	can verify them besides a plain socket lookup. Current
+	protocols for which pmtu events will be honored are TCP, SCTP
+	and DCCP as they verify e.g. the sequence number or the
+	association. This mode should not be enabled globally but is
+	only intended to secure e.g. name servers in namespaces where
+	TCP path mtu must still work but path MTU information of other
+	protocols should be discarded. If enabled globally this mode
+	could break other protocols.
+
+	Possible values: 0-3
+
+	Default: FALSE
+
+min_pmtu - INTEGER
+	default 552 - minimum discovered Path MTU
+
+ip_forward_use_pmtu - BOOLEAN
+	By default we don't trust protocol path MTUs while forwarding
+	because they could be easily forged and can lead to unwanted
+	fragmentation by the router.
+	You only need to enable this if you have user-space software
+	which tries to discover path mtus by itself and depends on the
+	kernel honoring this information. This is normally not the
+	case.
+
+	Default: 0 (disabled)
+
+	Possible values:
+
+	- 0 - disabled
+	- 1 - enabled
+
+fwmark_reflect - BOOLEAN
+	Controls the fwmark of kernel-generated IPv4 reply packets that are not
+	associated with a socket for example, TCP RSTs or ICMP echo replies).
+	If unset, these packets have a fwmark of zero. If set, they have the
+	fwmark of the packet they are replying to.
+
+	Default: 0
+
+fib_multipath_use_neigh - BOOLEAN
+	Use status of existing neighbor entry when determining nexthop for
+	multipath routes. If disabled, neighbor information is not used and
+	packets could be directed to a failed nexthop. Only valid for kernels
+	built with CONFIG_IP_ROUTE_MULTIPATH enabled.
+
+	Default: 0 (disabled)
+
+	Possible values:
+
+	- 0 - disabled
+	- 1 - enabled
+
+fib_multipath_hash_policy - INTEGER
+	Controls which hash policy to use for multipath routes. Only valid
+	for kernels built with CONFIG_IP_ROUTE_MULTIPATH enabled.
+
+	Default: 0 (Layer 3)
+
+	Possible values:
+
+	- 0 - Layer 3
+	- 1 - Layer 4
+	- 2 - Layer 3 or inner Layer 3 if present
+
+fib_sync_mem - UNSIGNED INTEGER
+	Amount of dirty memory from fib entries that can be backlogged before
+	synchronize_rcu is forced.
+
+	Default: 512kB   Minimum: 64kB   Maximum: 64MB
+
+ip_forward_update_priority - INTEGER
+	Whether to update SKB priority from "TOS" field in IPv4 header after it
+	is forwarded. The new SKB priority is mapped from TOS field value
+	according to an rt_tos2priority table (see e.g. man tc-prio).
+
+	Default: 1 (Update priority.)
+
+	Possible values:
+
+	- 0 - Do not update priority.
+	- 1 - Update priority.
+
+route/max_size - INTEGER
+	Maximum number of routes allowed in the kernel.  Increase
+	this when using large numbers of interfaces and/or routes.
+
+	From linux kernel 3.6 onwards, this is deprecated for ipv4
+	as route cache is no longer used.
+
+neigh/default/gc_thresh1 - INTEGER
+	Minimum number of entries to keep.  Garbage collector will not
+	purge entries if there are fewer than this number.
+
+	Default: 128
+
+neigh/default/gc_thresh2 - INTEGER
+	Threshold when garbage collector becomes more aggressive about
+	purging entries. Entries older than 5 seconds will be cleared
+	when over this number.
+
+	Default: 512
+
+neigh/default/gc_thresh3 - INTEGER
+	Maximum number of non-PERMANENT neighbor entries allowed.  Increase
+	this when using large numbers of interfaces and when communicating
+	with large numbers of directly-connected peers.
+
+	Default: 1024
+
+neigh/default/unres_qlen_bytes - INTEGER
+	The maximum number of bytes which may be used by packets
+	queued for each	unresolved address by other network layers.
+	(added in linux 3.3)
+
+	Setting negative value is meaningless and will return error.
+
+	Default: SK_WMEM_MAX, (same as net.core.wmem_default).
+
+		Exact value depends on architecture and kernel options,
+		but should be enough to allow queuing 256 packets
+		of medium size.
+
+neigh/default/unres_qlen - INTEGER
+	The maximum number of packets which may be queued for each
+	unresolved address by other network layers.
+
+	(deprecated in linux 3.3) : use unres_qlen_bytes instead.
+
+	Prior to linux 3.3, the default value is 3 which may cause
+	unexpected packet loss. The current default value is calculated
+	according to default value of unres_qlen_bytes and true size of
+	packet.
+
+	Default: 101
+
+mtu_expires - INTEGER
+	Time, in seconds, that cached PMTU information is kept.
+
+min_adv_mss - INTEGER
+	The advertised MSS depends on the first hop route MTU, but will
+	never be lower than this setting.
+
+IP Fragmentation:
+
+ipfrag_high_thresh - LONG INTEGER
+	Maximum memory used to reassemble IP fragments.
+
+ipfrag_low_thresh - LONG INTEGER
+	(Obsolete since linux-4.17)
+	Maximum memory used to reassemble IP fragments before the kernel
+	begins to remove incomplete fragment queues to free up resources.
+	The kernel still accepts new fragments for defragmentation.
+
+ipfrag_time - INTEGER
+	Time in seconds to keep an IP fragment in memory.
+
+ipfrag_max_dist - INTEGER
+	ipfrag_max_dist is a non-negative integer value which defines the
+	maximum "disorder" which is allowed among fragments which share a
+	common IP source address. Note that reordering of packets is
+	not unusual, but if a large number of fragments arrive from a source
+	IP address while a particular fragment queue remains incomplete, it
+	probably indicates that one or more fragments belonging to that queue
+	have been lost. When ipfrag_max_dist is positive, an additional check
+	is done on fragments before they are added to a reassembly queue - if
+	ipfrag_max_dist (or more) fragments have arrived from a particular IP
+	address between additions to any IP fragment queue using that source
+	address, it's presumed that one or more fragments in the queue are
+	lost. The existing fragment queue will be dropped, and a new one
+	started. An ipfrag_max_dist value of zero disables this check.
+
+	Using a very small value, e.g. 1 or 2, for ipfrag_max_dist can
+	result in unnecessarily dropping fragment queues when normal
+	reordering of packets occurs, which could lead to poor application
+	performance. Using a very large value, e.g. 50000, increases the
+	likelihood of incorrectly reassembling IP fragments that originate
+	from different IP datagrams, which could result in data corruption.
+	Default: 64
+
+INET peer storage
+=================
+
+inet_peer_threshold - INTEGER
+	The approximate size of the storage.  Starting from this threshold
+	entries will be thrown aggressively.  This threshold also determines
+	entries' time-to-live and time intervals between garbage collection
+	passes.  More entries, less time-to-live, less GC interval.
+
+inet_peer_minttl - INTEGER
+	Minimum time-to-live of entries.  Should be enough to cover fragment
+	time-to-live on the reassembling side.  This minimum time-to-live  is
+	guaranteed if the pool size is less than inet_peer_threshold.
+	Measured in seconds.
+
+inet_peer_maxttl - INTEGER
+	Maximum time-to-live of entries.  Unused entries will expire after
+	this period of time if there is no memory pressure on the pool (i.e.
+	when the number of entries in the pool is very small).
+	Measured in seconds.
+
+TCP variables
+=============
+
+somaxconn - INTEGER
+	Limit of socket listen() backlog, known in userspace as SOMAXCONN.
+	Defaults to 4096. (Was 128 before linux-5.4)
+	See also tcp_max_syn_backlog for additional tuning for TCP sockets.
+
+tcp_abort_on_overflow - BOOLEAN
+	If listening service is too slow to accept new connections,
+	reset them. Default state is FALSE. It means that if overflow
+	occurred due to a burst, connection will recover. Enable this
+	option _only_ if you are really sure that listening daemon
+	cannot be tuned to accept connections faster. Enabling this
+	option can harm clients of your server.
+
+tcp_adv_win_scale - INTEGER
+	Count buffering overhead as bytes/2^tcp_adv_win_scale
+	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
+	if it is <= 0.
+
+	Possible values are [-31, 31], inclusive.
+
+	Default: 1
+
+tcp_allowed_congestion_control - STRING
+	Show/set the congestion control choices available to non-privileged
+	processes. The list is a subset of those listed in
+	tcp_available_congestion_control.
+
+	Default is "reno" and the default setting (tcp_congestion_control).
+
+tcp_app_win - INTEGER
+	Reserve max(window/2^tcp_app_win, mss) of window for application
+	buffer. Value 0 is special, it means that nothing is reserved.
+
+	Default: 31
+
+tcp_autocorking - BOOLEAN
+	Enable TCP auto corking :
+	When applications do consecutive small write()/sendmsg() system calls,
+	we try to coalesce these small writes as much as possible, to lower
+	total amount of sent packets. This is done if at least one prior
+	packet for the flow is waiting in Qdisc queues or device transmit
+	queue. Applications can still use TCP_CORK for optimal behavior
+	when they know how/when to uncork their sockets.
+
+	Default : 1
+
+tcp_available_congestion_control - STRING
+	Shows the available congestion control choices that are registered.
+	More congestion control algorithms may be available as modules,
+	but not loaded.
+
+tcp_base_mss - INTEGER
+	The initial value of search_low to be used by the packetization layer
+	Path MTU discovery (MTU probing).  If MTU probing is enabled,
+	this is the initial MSS used by the connection.
+
+tcp_mtu_probe_floor - INTEGER
+	If MTU probing is enabled this caps the minimum MSS used for search_low
+	for the connection.
+
+	Default : 48
+
+tcp_min_snd_mss - INTEGER
+	TCP SYN and SYNACK messages usually advertise an ADVMSS option,
+	as described in RFC 1122 and RFC 6691.
+
+	If this ADVMSS option is smaller than tcp_min_snd_mss,
+	it is silently capped to tcp_min_snd_mss.
+
+	Default : 48 (at least 8 bytes of payload per segment)
+
+tcp_congestion_control - STRING
+	Set the congestion control algorithm to be used for new
+	connections. The algorithm "reno" is always available, but
+	additional choices may be available based on kernel configuration.
+	Default is set as part of kernel configuration.
+	For passive connections, the listener congestion control choice
+	is inherited.
+
+	[see setsockopt(listenfd, SOL_TCP, TCP_CONGESTION, "name" ...) ]
+
+tcp_dsack - BOOLEAN
+	Allows TCP to send "duplicate" SACKs.
+
+tcp_early_retrans - INTEGER
+	Tail loss probe (TLP) converts RTOs occurring due to tail
+	losses into fast recovery (draft-ietf-tcpm-rack). Note that
+	TLP requires RACK to function properly (see tcp_recovery below)
+
+	Possible values:
+
+		- 0 disables TLP
+		- 3 or 4 enables TLP
+
+	Default: 3
+
+tcp_ecn - INTEGER
+	Control use of Explicit Congestion Notification (ECN) by TCP.
+	ECN is used only when both ends of the TCP connection indicate
+	support for it.  This feature is useful in avoiding losses due
+	to congestion by allowing supporting routers to signal
+	congestion before having to drop packets.
+
+	Possible values are:
+
+		=  =====================================================
+		0  Disable ECN.  Neither initiate nor accept ECN.
+		1  Enable ECN when requested by incoming connections and
+		   also request ECN on outgoing connection attempts.
+		2  Enable ECN when requested by incoming connections
+		   but do not request ECN on outgoing connections.
+		=  =====================================================
+
+	Default: 2
+
+tcp_ecn_fallback - BOOLEAN
+	If the kernel detects that ECN connection misbehaves, enable fall
+	back to non-ECN. Currently, this knob implements the fallback
+	from RFC3168, section 6.1.1.1., but we reserve that in future,
+	additional detection mechanisms could be implemented under this
+	knob. The value	is not used, if tcp_ecn or per route (or congestion
+	control) ECN settings are disabled.
+
+	Default: 1 (fallback enabled)
+
+tcp_fack - BOOLEAN
+	This is a legacy option, it has no effect anymore.
+
+tcp_fin_timeout - INTEGER
+	The length of time an orphaned (no longer referenced by any
+	application) connection will remain in the FIN_WAIT_2 state
+	before it is aborted at the local end.  While a perfectly
+	valid "receive only" state for an un-orphaned connection, an
+	orphaned connection in FIN_WAIT_2 state could otherwise wait
+	forever for the remote to close its end of the connection.
+
+	Cf. tcp_max_orphans
+
+	Default: 60 seconds
+
+tcp_frto - INTEGER
+	Enables Forward RTO-Recovery (F-RTO) defined in RFC5682.
+	F-RTO is an enhanced recovery algorithm for TCP retransmission
+	timeouts.  It is particularly beneficial in networks where the
+	RTT fluctuates (e.g., wireless). F-RTO is sender-side only
+	modification. It does not require any support from the peer.
+
+	By default it's enabled with a non-zero value. 0 disables F-RTO.
+
+tcp_fwmark_accept - BOOLEAN
+	If set, incoming connections to listening sockets that do not have a
+	socket mark will set the mark of the accepting socket to the fwmark of
+	the incoming SYN packet. This will cause all packets on that connection
+	(starting from the first SYNACK) to be sent with that fwmark. The
+	listening socket's mark is unchanged. Listening sockets that already
+	have a fwmark set via setsockopt(SOL_SOCKET, SO_MARK, ...) are
+	unaffected.
+
+	Default: 0
+
+tcp_invalid_ratelimit - INTEGER
+	Limit the maximal rate for sending duplicate acknowledgments
+	in response to incoming TCP packets that are for an existing
+	connection but that are invalid due to any of these reasons:
+
+	  (a) out-of-window sequence number,
+	  (b) out-of-window acknowledgment number, or
+	  (c) PAWS (Protection Against Wrapped Sequence numbers) check failure
+
+	This can help mitigate simple "ack loop" DoS attacks, wherein
+	a buggy or malicious middlebox or man-in-the-middle can
+	rewrite TCP header fields in manner that causes each endpoint
+	to think that the other is sending invalid TCP segments, thus
+	causing each side to send an unterminating stream of duplicate
+	acknowledgments for invalid segments.
+
+	Using 0 disables rate-limiting of dupacks in response to
+	invalid segments; otherwise this value specifies the minimal
+	space between sending such dupacks, in milliseconds.
+
+	Default: 500 (milliseconds).
+
+tcp_keepalive_time - INTEGER
+	How often TCP sends out keepalive messages when keepalive is enabled.
+	Default: 2hours.
+
+tcp_keepalive_probes - INTEGER
+	How many keepalive probes TCP sends out, until it decides that the
+	connection is broken. Default value: 9.
+
+tcp_keepalive_intvl - INTEGER
+	How frequently the probes are send out. Multiplied by
+	tcp_keepalive_probes it is time to kill not responding connection,
+	after probes started. Default value: 75sec i.e. connection
+	will be aborted after ~11 minutes of retries.
+
+tcp_l3mdev_accept - BOOLEAN
+	Enables child sockets to inherit the L3 master device index.
+	Enabling this option allows a "global" listen socket to work
+	across L3 master domains (e.g., VRFs) with connected sockets
+	derived from the listen socket to be bound to the L3 domain in
+	which the packets originated. Only valid when the kernel was
+	compiled with CONFIG_NET_L3_MASTER_DEV.
+
+	Default: 0 (disabled)
+
+tcp_low_latency - BOOLEAN
+	This is a legacy option, it has no effect anymore.
+
+tcp_max_orphans - INTEGER
+	Maximal number of TCP sockets not attached to any user file handle,
+	held by system.	If this number is exceeded orphaned connections are
+	reset immediately and warning is printed. This limit exists
+	only to prevent simple DoS attacks, you _must_ not rely on this
+	or lower the limit artificially, but rather increase it
+	(probably, after increasing installed memory),
+	if network conditions require more than default value,
+	and tune network services to linger and kill such states
+	more aggressively. Let me to remind again: each orphan eats
+	up to ~64K of unswappable memory.
+
+tcp_max_syn_backlog - INTEGER
+	Maximal number of remembered connection requests (SYN_RECV),
+	which have not received an acknowledgment from connecting client.
+
+	This is a per-listener limit.
+
+	The minimal value is 128 for low memory machines, and it will
+	increase in proportion to the memory of machine.
+
+	If server suffers from overload, try increasing this number.
+
+	Remember to also check /proc/sys/net/core/somaxconn
+	A SYN_RECV request socket consumes about 304 bytes of memory.
+
+tcp_max_tw_buckets - INTEGER
+	Maximal number of timewait sockets held by system simultaneously.
+	If this number is exceeded time-wait socket is immediately destroyed
+	and warning is printed. This limit exists only to prevent
+	simple DoS attacks, you _must_ not lower the limit artificially,
+	but rather increase it (probably, after increasing installed memory),
+	if network conditions require more than default value.
+
+tcp_mem - vector of 3 INTEGERs: min, pressure, max
+	min: below this number of pages TCP is not bothered about its
+	memory appetite.
+
+	pressure: when amount of memory allocated by TCP exceeds this number
+	of pages, TCP moderates its memory consumption and enters memory
+	pressure mode, which is exited when memory consumption falls
+	under "min".
+
+	max: number of pages allowed for queueing by all TCP sockets.
+
+	Defaults are calculated at boot time from amount of available
+	memory.
+
+tcp_min_rtt_wlen - INTEGER
+	The window length of the windowed min filter to track the minimum RTT.
+	A shorter window lets a flow more quickly pick up new (higher)
+	minimum RTT when it is moved to a longer path (e.g., due to traffic
+	engineering). A longer window makes the filter more resistant to RTT
+	inflations such as transient congestion. The unit is seconds.
+
+	Possible values: 0 - 86400 (1 day)
+
+	Default: 300
+
+tcp_moderate_rcvbuf - BOOLEAN
+	If set, TCP performs receive buffer auto-tuning, attempting to
+	automatically size the buffer (no greater than tcp_rmem[2]) to
+	match the size required by the path for full throughput.  Enabled by
+	default.
+
+tcp_mtu_probing - INTEGER
+	Controls TCP Packetization-Layer Path MTU Discovery.  Takes three
+	values:
+
+	- 0 - Disabled
+	- 1 - Disabled by default, enabled when an ICMP black hole detected
+	- 2 - Always enabled, use initial MSS of tcp_base_mss.
+
+tcp_probe_interval - UNSIGNED INTEGER
+	Controls how often to start TCP Packetization-Layer Path MTU
+	Discovery reprobe. The default is reprobing every 10 minutes as
+	per RFC4821.
+
+tcp_probe_threshold - INTEGER
+	Controls when TCP Packetization-Layer Path MTU Discovery probing
+	will stop in respect to the width of search range in bytes. Default
+	is 8 bytes.
+
+tcp_no_metrics_save - BOOLEAN
+	By default, TCP saves various connection metrics in the route cache
+	when the connection closes, so that connections established in the
+	near future can use these to set initial conditions.  Usually, this
+	increases overall performance, but may sometimes cause performance
+	degradation.  If set, TCP will not cache metrics on closing
+	connections.
+
+tcp_no_ssthresh_metrics_save - BOOLEAN
+	Controls whether TCP saves ssthresh metrics in the route cache.
+
+	Default is 1, which disables ssthresh metrics.
+
+tcp_orphan_retries - INTEGER
+	This value influences the timeout of a locally closed TCP connection,
+	when RTO retransmissions remain unacknowledged.
+	See tcp_retries2 for more details.
+
+	The default value is 8.
+
+	If your machine is a loaded WEB server,
+	you should think about lowering this value, such sockets
+	may consume significant resources. Cf. tcp_max_orphans.
+
+tcp_recovery - INTEGER
+	This value is a bitmap to enable various experimental loss recovery
+	features.
+
+	=========   =============================================================
+	RACK: 0x1   enables the RACK loss detection for fast detection of lost
+		    retransmissions and tail drops. It also subsumes and disables
+		    RFC6675 recovery for SACK connections.
+
+	RACK: 0x2   makes RACK's reordering window static (min_rtt/4).
+
+	RACK: 0x4   disables RACK's DUPACK threshold heuristic
+	=========   =============================================================
+
+	Default: 0x1
+
+tcp_reordering - INTEGER
+	Initial reordering level of packets in a TCP stream.
+	TCP stack can then dynamically adjust flow reordering level
+	between this initial value and tcp_max_reordering
+
+	Default: 3
+
+tcp_max_reordering - INTEGER
+	Maximal reordering level of packets in a TCP stream.
+	300 is a fairly conservative value, but you might increase it
+	if paths are using per packet load balancing (like bonding rr mode)
+
+	Default: 300
+
+tcp_retrans_collapse - BOOLEAN
+	Bug-to-bug compatibility with some broken printers.
+	On retransmit try to send bigger packets to work around bugs in
+	certain TCP stacks.
+
+tcp_retries1 - INTEGER
+	This value influences the time, after which TCP decides, that
+	something is wrong due to unacknowledged RTO retransmissions,
+	and reports this suspicion to the network layer.
+	See tcp_retries2 for more details.
+
+	RFC 1122 recommends at least 3 retransmissions, which is the
+	default.
+
+tcp_retries2 - INTEGER
+	This value influences the timeout of an alive TCP connection,
+	when RTO retransmissions remain unacknowledged.
+	Given a value of N, a hypothetical TCP connection following
+	exponential backoff with an initial RTO of TCP_RTO_MIN would
+	retransmit N times before killing the connection at the (N+1)th RTO.
+
+	The default value of 15 yields a hypothetical timeout of 924.6
+	seconds and is a lower bound for the effective timeout.
+	TCP will effectively time out at the first RTO which exceeds the
+	hypothetical timeout.
+
+	RFC 1122 recommends at least 100 seconds for the timeout,
+	which corresponds to a value of at least 8.
+
+tcp_rfc1337 - BOOLEAN
+	If set, the TCP stack behaves conforming to RFC1337. If unset,
+	we are not conforming to RFC, but prevent TCP TIME_WAIT
+	assassination.
+
+	Default: 0
+
+tcp_rmem - vector of 3 INTEGERs: min, default, max
+	min: Minimal size of receive buffer used by TCP sockets.
+	It is guaranteed to each TCP socket, even under moderate memory
+	pressure.
+
+	Default: 4K
+
+	default: initial size of receive buffer used by TCP sockets.
+	This value overrides net.core.rmem_default used by other protocols.
+	Default: 87380 bytes. This value results in window of 65535 with
+	default setting of tcp_adv_win_scale and tcp_app_win:0 and a bit
+	less for default tcp_app_win. See below about these variables.
+
+	max: maximal size of receive buffer allowed for automatically
+	selected receiver buffers for TCP socket. This value does not override
+	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
+	automatic tuning of that socket's receive buffer size, in which
+	case this value is ignored.
+	Default: between 87380B and 6MB, depending on RAM size.
+
+tcp_sack - BOOLEAN
+	Enable select acknowledgments (SACKS).
+
+tcp_comp_sack_delay_ns - LONG INTEGER
+	TCP tries to reduce number of SACK sent, using a timer
+	based on 5% of SRTT, capped by this sysctl, in nano seconds.
+	The default is 1ms, based on TSO autosizing period.
+
+	Default : 1,000,000 ns (1 ms)
+
+tcp_comp_sack_nr - INTEGER
+	Max number of SACK that can be compressed.
+	Using 0 disables SACK compression.
+
+	Default : 44
+
+tcp_slow_start_after_idle - BOOLEAN
+	If set, provide RFC2861 behavior and time out the congestion
+	window after an idle period.  An idle period is defined at
+	the current RTO.  If unset, the congestion window will not
+	be timed out after an idle period.
+
+	Default: 1
+
+tcp_stdurg - BOOLEAN
+	Use the Host requirements interpretation of the TCP urgent pointer field.
+	Most hosts use the older BSD interpretation, so if you turn this on
+	Linux might not communicate correctly with them.
+
+	Default: FALSE
+
+tcp_synack_retries - INTEGER
+	Number of times SYNACKs for a passive TCP connection attempt will
+	be retransmitted. Should not be higher than 255. Default value
+	is 5, which corresponds to 31seconds till the last retransmission
+	with the current initial RTO of 1second. With this the final timeout
+	for a passive TCP connection will happen after 63seconds.
+
+tcp_syncookies - INTEGER
+	Only valid when the kernel was compiled with CONFIG_SYN_COOKIES
+	Send out syncookies when the syn backlog queue of a socket
+	overflows. This is to prevent against the common 'SYN flood attack'
+	Default: 1
+
+	Note, that syncookies is fallback facility.
+	It MUST NOT be used to help highly loaded servers to stand
+	against legal connection rate. If you see SYN flood warnings
+	in your logs, but investigation	shows that they occur
+	because of overload with legal connections, you should tune
+	another parameters until this warning disappear.
+	See: tcp_max_syn_backlog, tcp_synack_retries, tcp_abort_on_overflow.
+
+	syncookies seriously violate TCP protocol, do not allow
+	to use TCP extensions, can result in serious degradation
+	of some services (f.e. SMTP relaying), visible not by you,
+	but your clients and relays, contacting you. While you see
+	SYN flood warnings in logs not being really flooded, your server
+	is seriously misconfigured.
+
+	If you want to test which effects syncookies have to your
+	network connections you can set this knob to 2 to enable
+	unconditionally generation of syncookies.
+
+tcp_fastopen - INTEGER
+	Enable TCP Fast Open (RFC7413) to send and accept data in the opening
+	SYN packet.
+
+	The client support is enabled by flag 0x1 (on by default). The client
+	then must use sendmsg() or sendto() with the MSG_FASTOPEN flag,
+	rather than connect() to send data in SYN.
+
+	The server support is enabled by flag 0x2 (off by default). Then
+	either enable for all listeners with another flag (0x400) or
+	enable individual listeners via TCP_FASTOPEN socket option with
+	the option value being the length of the syn-data backlog.
+
+	The values (bitmap) are
+
+	=====  ======== ======================================================
+	  0x1  (client) enables sending data in the opening SYN on the client.
+	  0x2  (server) enables the server support, i.e., allowing data in
+			a SYN packet to be accepted and passed to the
+			application before 3-way handshake finishes.
+	  0x4  (client) send data in the opening SYN regardless of cookie
+			availability and without a cookie option.
+	0x200  (server) accept data-in-SYN w/o any cookie option present.
+	0x400  (server) enable all listeners to support Fast Open by
+			default without explicit TCP_FASTOPEN socket option.
+	=====  ======== ======================================================
+
+	Default: 0x1
+
+	Note that that additional client or server features are only
+	effective if the basic support (0x1 and 0x2) are enabled respectively.
+
+tcp_fastopen_blackhole_timeout_sec - INTEGER
+	Initial time period in second to disable Fastopen on active TCP sockets
+	when a TFO firewall blackhole issue happens.
+	This time period will grow exponentially when more blackhole issues
+	get detected right after Fastopen is re-enabled and will reset to
+	initial value when the blackhole issue goes away.
+	0 to disable the blackhole detection.
+
+	By default, it is set to 1hr.
+
+tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
+	The list consists of a primary key and an optional backup key. The
+	primary key is used for both creating and validating cookies, while the
+	optional backup key is only used for validating cookies. The purpose of
+	the backup key is to maximize TFO validation when keys are rotated.
+
+	A randomly chosen primary key may be configured by the kernel if
+	the tcp_fastopen sysctl is set to 0x400 (see above), or if the
+	TCP_FASTOPEN setsockopt() optname is set and a key has not been
+	previously configured via sysctl. If keys are configured via
+	setsockopt() by using the TCP_FASTOPEN_KEY optname, then those
+	per-socket keys will be used instead of any keys that are specified via
+	sysctl.
+
+	A key is specified as 4 8-digit hexadecimal integers which are separated
+	by a '-' as: xxxxxxxx-xxxxxxxx-xxxxxxxx-xxxxxxxx. Leading zeros may be
+	omitted. A primary and a backup key may be specified by separating them
+	by a comma. If only one key is specified, it becomes the primary key and
+	any previously configured backup keys are removed.
+
+tcp_syn_retries - INTEGER
+	Number of times initial SYNs for an active TCP connection attempt
+	will be retransmitted. Should not be higher than 127. Default value
+	is 6, which corresponds to 63seconds till the last retransmission
+	with the current initial RTO of 1second. With this the final timeout
+	for an active TCP connection attempt will happen after 127seconds.
+
+tcp_timestamps - INTEGER
+	Enable timestamps as defined in RFC1323.
+
+	- 0: Disabled.
+	- 1: Enable timestamps as defined in RFC1323 and use random offset for
+	  each connection rather than only using the current time.
+	- 2: Like 1, but without random offsets.
+
+	Default: 1
+
+tcp_min_tso_segs - INTEGER
+	Minimal number of segments per TSO frame.
+
+	Since linux-3.12, TCP does an automatic sizing of TSO frames,
+	depending on flow rate, instead of filling 64Kbytes packets.
+	For specific usages, it's possible to force TCP to build big
+	TSO frames. Note that TCP stack might split too big TSO packets
+	if available window is too small.
+
+	Default: 2
+
+tcp_pacing_ss_ratio - INTEGER
+	sk->sk_pacing_rate is set by TCP stack using a ratio applied
+	to current rate. (current_rate = cwnd * mss / srtt)
+	If TCP is in slow start, tcp_pacing_ss_ratio is applied
+	to let TCP probe for bigger speeds, assuming cwnd can be
+	doubled every other RTT.
+
+	Default: 200
+
+tcp_pacing_ca_ratio - INTEGER
+	sk->sk_pacing_rate is set by TCP stack using a ratio applied
+	to current rate. (current_rate = cwnd * mss / srtt)
+	If TCP is in congestion avoidance phase, tcp_pacing_ca_ratio
+	is applied to conservatively probe for bigger throughput.
+
+	Default: 120
+
+tcp_tso_win_divisor - INTEGER
+	This allows control over what percentage of the congestion window
+	can be consumed by a single TSO frame.
+	The setting of this parameter is a choice between burstiness and
+	building larger TSO frames.
+
+	Default: 3
+
+tcp_tw_reuse - INTEGER
+	Enable reuse of TIME-WAIT sockets for new connections when it is
+	safe from protocol viewpoint.
+
+	- 0 - disable
+	- 1 - global enable
+	- 2 - enable for loopback traffic only
+
+	It should not be changed without advice/request of technical
+	experts.
+
+	Default: 2
+
+tcp_window_scaling - BOOLEAN
+	Enable window scaling as defined in RFC1323.
+
+tcp_wmem - vector of 3 INTEGERs: min, default, max
+	min: Amount of memory reserved for send buffers for TCP sockets.
+	Each TCP socket has rights to use it due to fact of its birth.
+
+	Default: 4K
+
+	default: initial size of send buffer used by TCP sockets.  This
+	value overrides net.core.wmem_default used by other protocols.
+
+	It is usually lower than net.core.wmem_default.
+
+	Default: 16K
+
+	max: Maximal amount of memory allowed for automatically tuned
+	send buffers for TCP sockets. This value does not override
+	net.core.wmem_max.  Calling setsockopt() with SO_SNDBUF disables
+	automatic tuning of that socket's send buffer size, in which case
+	this value is ignored.
+
+	Default: between 64K and 4MB, depending on RAM size.
+
+tcp_notsent_lowat - UNSIGNED INTEGER
+	A TCP socket can control the amount of unsent bytes in its write queue,
+	thanks to TCP_NOTSENT_LOWAT socket option. poll()/select()/epoll()
+	reports POLLOUT events if the amount of unsent bytes is below a per
+	socket value, and if the write queue is not full. sendmsg() will
+	also not add new buffers if the limit is hit.
+
+	This global variable controls the amount of unsent data for
+	sockets not using TCP_NOTSENT_LOWAT. For these sockets, a change
+	to the global variable has immediate effect.
+
+	Default: UINT_MAX (0xFFFFFFFF)
+
+tcp_workaround_signed_windows - BOOLEAN
+	If set, assume no receipt of a window scaling option means the
+	remote TCP is broken and treats the window as a signed quantity.
+	If unset, assume the remote TCP is not broken even if we do
+	not receive a window scaling option from them.
+
+	Default: 0
+
+tcp_thin_linear_timeouts - BOOLEAN
+	Enable dynamic triggering of linear timeouts for thin streams.
+	If set, a check is performed upon retransmission by timeout to
+	determine if the stream is thin (less than 4 packets in flight).
+	As long as the stream is found to be thin, up to 6 linear
+	timeouts may be performed before exponential backoff mode is
+	initiated. This improves retransmission latency for
+	non-aggressive thin streams, often found to be time-dependent.
+	For more information on thin streams, see
+	Documentation/networking/tcp-thin.txt
+
+	Default: 0
+
+tcp_limit_output_bytes - INTEGER
+	Controls TCP Small Queue limit per tcp socket.
+	TCP bulk sender tends to increase packets in flight until it
+	gets losses notifications. With SNDBUF autotuning, this can
+	result in a large amount of packets queued on the local machine
+	(e.g.: qdiscs, CPU backlog, or device) hurting latency of other
+	flows, for typical pfifo_fast qdiscs.  tcp_limit_output_bytes
+	limits the number of bytes on qdisc or device to reduce artificial
+	RTT/cwnd and reduce bufferbloat.
+
+	Default: 1048576 (16 * 65536)
+
+tcp_challenge_ack_limit - INTEGER
+	Limits number of Challenge ACK sent per second, as recommended
+	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
+	Default: 1000
+
+tcp_rx_skb_cache - BOOLEAN
+	Controls a per TCP socket cache of one skb, that might help
+	performance of some workloads. This might be dangerous
+	on systems with a lot of TCP sockets, since it increases
+	memory usage.
+
+	Default: 0 (disabled)
+
+UDP variables
+=============
+
+udp_l3mdev_accept - BOOLEAN
+	Enabling this option allows a "global" bound socket to work
+	across L3 master domains (e.g., VRFs) with packets capable of
+	being received regardless of the L3 domain in which they
+	originated. Only valid when the kernel was compiled with
+	CONFIG_NET_L3_MASTER_DEV.
+
+	Default: 0 (disabled)
+
+udp_mem - vector of 3 INTEGERs: min, pressure, max
+	Number of pages allowed for queueing by all UDP sockets.
+
+	min: Below this number of pages UDP is not bothered about its
+	memory appetite. When amount of memory allocated by UDP exceeds
+	this number, UDP starts to moderate memory usage.
+
+	pressure: This value was introduced to follow format of tcp_mem.
+
+	max: Number of pages allowed for queueing by all UDP sockets.
+
+	Default is calculated at boot time from amount of available memory.
+
+udp_rmem_min - INTEGER
+	Minimal size of receive buffer used by UDP sockets in moderation.
+	Each UDP socket is able to use the size for receiving data, even if
+	total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
+
+	Default: 4K
+
+udp_wmem_min - INTEGER
+	Minimal size of send buffer used by UDP sockets in moderation.
+	Each UDP socket is able to use the size for sending data, even if
+	total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
+
+	Default: 4K
+
+RAW variables
+=============
+
+raw_l3mdev_accept - BOOLEAN
+	Enabling this option allows a "global" bound socket to work
+	across L3 master domains (e.g., VRFs) with packets capable of
+	being received regardless of the L3 domain in which they
+	originated. Only valid when the kernel was compiled with
+	CONFIG_NET_L3_MASTER_DEV.
+
+	Default: 1 (enabled)
+
+CIPSOv4 Variables
+=================
+
+cipso_cache_enable - BOOLEAN
+	If set, enable additions to and lookups from the CIPSO label mapping
+	cache.  If unset, additions are ignored and lookups always result in a
+	miss.  However, regardless of the setting the cache is still
+	invalidated when required when means you can safely toggle this on and
+	off and the cache will always be "safe".
+
+	Default: 1
+
+cipso_cache_bucket_size - INTEGER
+	The CIPSO label cache consists of a fixed size hash table with each
+	hash bucket containing a number of cache entries.  This variable limits
+	the number of entries in each hash bucket; the larger the value the
+	more CIPSO label mappings that can be cached.  When the number of
+	entries in a given hash bucket reaches this limit adding new entries
+	causes the oldest entry in the bucket to be removed to make room.
+
+	Default: 10
+
+cipso_rbm_optfmt - BOOLEAN
+	Enable the "Optimized Tag 1 Format" as defined in section 3.4.2.6 of
+	the CIPSO draft specification (see Documentation/netlabel for details).
+	This means that when set the CIPSO tag will be padded with empty
+	categories in order to make the packet data 32-bit aligned.
+
+	Default: 0
+
+cipso_rbm_structvalid - BOOLEAN
+	If set, do a very strict check of the CIPSO option when
+	ip_options_compile() is called.  If unset, relax the checks done during
+	ip_options_compile().  Either way is "safe" as errors are caught else
+	where in the CIPSO processing code but setting this to 0 (False) should
+	result in less work (i.e. it should be faster) but could cause problems
+	with other implementations that require strict checking.
+
+	Default: 0
+
+IP Variables
+============
+
+ip_local_port_range - 2 INTEGERS
+	Defines the local port range that is used by TCP and UDP to
+	choose the local port. The first number is the first, the
+	second the last local port number.
+	If possible, it is better these numbers have different parity
+	(one even and one odd value).
+	Must be greater than or equal to ip_unprivileged_port_start.
+	The default values are 32768 and 60999 respectively.
+
+ip_local_reserved_ports - list of comma separated ranges
+	Specify the ports which are reserved for known third-party
+	applications. These ports will not be used by automatic port
+	assignments (e.g. when calling connect() or bind() with port
+	number 0). Explicit port allocation behavior is unchanged.
+
+	The format used for both input and output is a comma separated
+	list of ranges (e.g. "1,2-4,10-10" for ports 1, 2, 3, 4 and
+	10). Writing to the file will clear all previously reserved
+	ports and update the current list with the one given in the
+	input.
+
+	Note that ip_local_port_range and ip_local_reserved_ports
+	settings are independent and both are considered by the kernel
+	when determining which ports are available for automatic port
+	assignments.
+
+	You can reserve ports which are not in the current
+	ip_local_port_range, e.g.::
+
+	    $ cat /proc/sys/net/ipv4/ip_local_port_range
+	    32000	60999
+	    $ cat /proc/sys/net/ipv4/ip_local_reserved_ports
+	    8080,9148
+
+	although this is redundant. However such a setting is useful
+	if later the port range is changed to a value that will
+	include the reserved ports.
+
+	Default: Empty
+
+ip_unprivileged_port_start - INTEGER
+	This is a per-namespace sysctl.  It defines the first
+	unprivileged port in the network namespace.  Privileged ports
+	require root or CAP_NET_BIND_SERVICE in order to bind to them.
+	To disable all privileged ports, set this to 0.  They must not
+	overlap with the ip_local_port_range.
+
+	Default: 1024
+
+ip_nonlocal_bind - BOOLEAN
+	If set, allows processes to bind() to non-local IP addresses,
+	which can be quite useful - but may break some applications.
+
+	Default: 0
+
+ip_autobind_reuse - BOOLEAN
+	By default, bind() does not select the ports automatically even if
+	the new socket and all sockets bound to the port have SO_REUSEADDR.
+	ip_autobind_reuse allows bind() to reuse the port and this is useful
+	when you use bind()+connect(), but may break some applications.
+	The preferred solution is to use IP_BIND_ADDRESS_NO_PORT and this
+	option should only be set by experts.
+	Default: 0
+
+ip_dynaddr - BOOLEAN
+	If set non-zero, enables support for dynamic addresses.
+	If set to a non-zero value larger than 1, a kernel log
+	message will be printed when dynamic address rewriting
+	occurs.
+
+	Default: 0
+
+ip_early_demux - BOOLEAN
+	Optimize input packet processing down to one demux for
+	certain kinds of local sockets.  Currently we only do this
+	for established TCP and connected UDP sockets.
+
+	It may add an additional cost for pure routing workloads that
+	reduces overall throughput, in such case you should disable it.
+
+	Default: 1
+
+ping_group_range - 2 INTEGERS
+	Restrict ICMP_PROTO datagram sockets to users in the group range.
+	The default is "1 0", meaning, that nobody (not even root) may
+	create ping sockets.  Setting it to "100 100" would grant permissions
+	to the single group. "0 4294967295" would enable it for the world, "100
+	4294967295" would enable it for the users, but not daemons.
+
+tcp_early_demux - BOOLEAN
+	Enable early demux for established TCP sockets.
+
+	Default: 1
+
+udp_early_demux - BOOLEAN
+	Enable early demux for connected UDP sockets. Disable this if
+	your system could experience more unconnected load.
+
+	Default: 1
+
+icmp_echo_ignore_all - BOOLEAN
+	If set non-zero, then the kernel will ignore all ICMP ECHO
+	requests sent to it.
+
+	Default: 0
+
+icmp_echo_ignore_broadcasts - BOOLEAN
+	If set non-zero, then the kernel will ignore all ICMP ECHO and
+	TIMESTAMP requests sent to it via broadcast/multicast.
+
+	Default: 1
+
+icmp_ratelimit - INTEGER
+	Limit the maximal rates for sending ICMP packets whose type matches
+	icmp_ratemask (see below) to specific targets.
+	0 to disable any limiting,
+	otherwise the minimal space between responses in milliseconds.
+	Note that another sysctl, icmp_msgs_per_sec limits the number
+	of ICMP packets	sent on all targets.
+
+	Default: 1000
+
+icmp_msgs_per_sec - INTEGER
+	Limit maximal number of ICMP packets sent per second from this host.
+	Only messages whose type matches icmp_ratemask (see below) are
+	controlled by this limit.
+
+	Default: 1000
+
+icmp_msgs_burst - INTEGER
+	icmp_msgs_per_sec controls number of ICMP packets sent per second,
+	while icmp_msgs_burst controls the burst size of these packets.
+
+	Default: 50
+
+icmp_ratemask - INTEGER
+	Mask made of ICMP types for which rates are being limited.
+
+	Significant bits: IHGFEDCBA9876543210
+
+	Default mask:     0000001100000011000 (6168)
+
+	Bit definitions (see include/linux/icmp.h):
+
+		= =========================
+		0 Echo Reply
+		3 Destination Unreachable [1]_
+		4 Source Quench [1]_
+		5 Redirect
+		8 Echo Request
+		B Time Exceeded [1]_
+		C Parameter Problem [1]_
+		D Timestamp Request
+		E Timestamp Reply
+		F Info Request
+		G Info Reply
+		H Address Mask Request
+		I Address Mask Reply
+		= =========================
+
+	.. [1] These are rate limited by default (see default mask above)
+
+icmp_ignore_bogus_error_responses - BOOLEAN
+	Some routers violate RFC1122 by sending bogus responses to broadcast
+	frames.  Such violations are normally logged via a kernel warning.
+	If this is set to TRUE, the kernel will not give such warnings, which
+	will avoid log file clutter.
+
+	Default: 1
+
+icmp_errors_use_inbound_ifaddr - BOOLEAN
+
+	If zero, icmp error messages are sent with the primary address of
+	the exiting interface.
+
+	If non-zero, the message will be sent with the primary address of
+	the interface that received the packet that caused the icmp error.
+	This is the behaviour network many administrators will expect from
+	a router. And it can make debugging complicated network layouts
+	much easier.
+
+	Note that if no primary address exists for the interface selected,
+	then the primary address of the first non-loopback interface that
+	has one will be used regardless of this setting.
+
+	Default: 0
+
+igmp_max_memberships - INTEGER
+	Change the maximum number of multicast groups we can subscribe to.
+	Default: 20
+
+	Theoretical maximum value is bounded by having to send a membership
+	report in a single datagram (i.e. the report can't span multiple
+	datagrams, or risk confusing the switch and leaving groups you don't
+	intend to).
+
+	The number of supported groups 'M' is bounded by the number of group
+	report entries you can fit into a single datagram of 65535 bytes.
+
+	M = 65536-sizeof (ip header)/(sizeof(Group record))
+
+	Group records are variable length, with a minimum of 12 bytes.
+	So net.ipv4.igmp_max_memberships should not be set higher than:
+
+	(65536-24) / 12 = 5459
+
+	The value 5459 assumes no IP header options, so in practice
+	this number may be lower.
+
+igmp_max_msf - INTEGER
+	Maximum number of addresses allowed in the source filter list for a
+	multicast group.
+
+	Default: 10
+
+igmp_qrv - INTEGER
+	Controls the IGMP query robustness variable (see RFC2236 8.1).
+
+	Default: 2 (as specified by RFC2236 8.1)
+
+	Minimum: 1 (as specified by RFC6636 4.5)
+
+force_igmp_version - INTEGER
+	- 0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
+	  allowed. Will back to IGMPv3 mode again if all IGMPv1/v2 Querier
+	  Present timer expires.
+	- 1 - Enforce to use IGMP version 1. Will also reply IGMPv1 report if
+	  receive IGMPv2/v3 query.
+	- 2 - Enforce to use IGMP version 2. Will fallback to IGMPv1 if receive
+	  IGMPv1 query message. Will reply report if receive IGMPv3 query.
+	- 3 - Enforce to use IGMP version 3. The same react with default 0.
+
+	.. note::
+
+	   this is not the same with force_mld_version because IGMPv3 RFC3376
+	   Security Considerations does not have clear description that we could
+	   ignore other version messages completely as MLDv2 RFC3810. So make
+	   this value as default 0 is recommended.
+
+``conf/interface/*``
+	changes special settings per interface (where
+	interface" is the name of your network interface)
+
+``conf/all/*``
+	  is special, changes the settings for all interfaces
+
+log_martians - BOOLEAN
+	Log packets with impossible addresses to kernel log.
+	log_martians for the interface will be enabled if at least one of
+	conf/{all,interface}/log_martians is set to TRUE,
+	it will be disabled otherwise
+
+accept_redirects - BOOLEAN
+	Accept ICMP redirect messages.
+	accept_redirects for the interface will be enabled if:
+
+	- both conf/{all,interface}/accept_redirects are TRUE in the case
+	  forwarding for the interface is enabled
+
+	or
+
+	- at least one of conf/{all,interface}/accept_redirects is TRUE in the
+	  case forwarding for the interface is disabled
+
+	accept_redirects for the interface will be disabled otherwise
+
+	default:
+
+		- TRUE (host)
+		- FALSE (router)
+
+forwarding - BOOLEAN
+	Enable IP forwarding on this interface.  This controls whether packets
+	received _on_ this interface can be forwarded.
+
+mc_forwarding - BOOLEAN
+	Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE
+	and a multicast routing daemon is required.
+	conf/all/mc_forwarding must also be set to TRUE to enable multicast
+	routing	for the interface
+
+medium_id - INTEGER
+	Integer value used to differentiate the devices by the medium they
+	are attached to. Two devices can have different id values when
+	the broadcast packets are received only on one of them.
+	The default value 0 means that the device is the only interface
+	to its medium, value of -1 means that medium is not known.
+
+	Currently, it is used to change the proxy_arp behavior:
+	the proxy_arp feature is enabled for packets forwarded between
+	two devices attached to different media.
+
+proxy_arp - BOOLEAN
+	Do proxy arp.
+
+	proxy_arp for the interface will be enabled if at least one of
+	conf/{all,interface}/proxy_arp is set to TRUE,
+	it will be disabled otherwise
+
+proxy_arp_pvlan - BOOLEAN
+	Private VLAN proxy arp.
+
+	Basically allow proxy arp replies back to the same interface
+	(from which the ARP request/solicitation was received).
+
+	This is done to support (ethernet) switch features, like RFC
+	3069, where the individual ports are NOT allowed to
+	communicate with each other, but they are allowed to talk to
+	the upstream router.  As described in RFC 3069, it is possible
+	to allow these hosts to communicate through the upstream
+	router by proxy_arp'ing. Don't need to be used together with
+	proxy_arp.
+
+	This technology is known by different names:
+
+	  In RFC 3069 it is called VLAN Aggregation.
+	  Cisco and Allied Telesyn call it Private VLAN.
+	  Hewlett-Packard call it Source-Port filtering or port-isolation.
+	  Ericsson call it MAC-Forced Forwarding (RFC Draft).
+
+shared_media - BOOLEAN
+	Send(router) or accept(host) RFC1620 shared media redirects.
+	Overrides secure_redirects.
+
+	shared_media for the interface will be enabled if at least one of
+	conf/{all,interface}/shared_media is set to TRUE,
+	it will be disabled otherwise
+
+	default TRUE
+
+secure_redirects - BOOLEAN
+	Accept ICMP redirect messages only to gateways listed in the
+	interface's current gateway list. Even if disabled, RFC1122 redirect
+	rules still apply.
+
+	Overridden by shared_media.
+
+	secure_redirects for the interface will be enabled if at least one of
+	conf/{all,interface}/secure_redirects is set to TRUE,
+	it will be disabled otherwise
+
+	default TRUE
+
+send_redirects - BOOLEAN
+	Send redirects, if router.
+
+	send_redirects for the interface will be enabled if at least one of
+	conf/{all,interface}/send_redirects is set to TRUE,
+	it will be disabled otherwise
+
+	Default: TRUE
+
+bootp_relay - BOOLEAN
+	Accept packets with source address 0.b.c.d destined
+	not to this host as local ones. It is supposed, that
+	BOOTP relay daemon will catch and forward such packets.
+	conf/all/bootp_relay must also be set to TRUE to enable BOOTP relay
+	for the interface
+
+	default FALSE
+
+	Not Implemented Yet.
+
+accept_source_route - BOOLEAN
+	Accept packets with SRR option.
+	conf/all/accept_source_route must also be set to TRUE to accept packets
+	with SRR option on the interface
+
+	default
+
+		- TRUE (router)
+		- FALSE (host)
+
+accept_local - BOOLEAN
+	Accept packets with local source addresses. In combination with
+	suitable routing, this can be used to direct packets between two
+	local interfaces over the wire and have them accepted properly.
+	default FALSE
+
+route_localnet - BOOLEAN
+	Do not consider loopback addresses as martian source or destination
+	while routing. This enables the use of 127/8 for local routing purposes.
+
+	default FALSE
+
+rp_filter - INTEGER
+	- 0 - No source validation.
+	- 1 - Strict mode as defined in RFC3704 Strict Reverse Path
+	  Each incoming packet is tested against the FIB and if the interface
+	  is not the best reverse path the packet check will fail.
+	  By default failed packets are discarded.
+	- 2 - Loose mode as defined in RFC3704 Loose Reverse Path
+	  Each incoming packet's source address is also tested against the FIB
+	  and if the source address is not reachable via any interface
+	  the packet check will fail.
+
+	Current recommended practice in RFC3704 is to enable strict mode
+	to prevent IP spoofing from DDos attacks. If using asymmetric routing
+	or other complicated routing, then loose mode is recommended.
+
+	The max value from conf/{all,interface}/rp_filter is used
+	when doing source validation on the {interface}.
+
+	Default value is 0. Note that some distributions enable it
+	in startup scripts.
+
+arp_filter - BOOLEAN
+	- 1 - Allows you to have multiple network interfaces on the same
+	  subnet, and have the ARPs for each interface be answered
+	  based on whether or not the kernel would route a packet from
+	  the ARP'd IP out that interface (therefore you must use source
+	  based routing for this to work). In other words it allows control
+	  of which cards (usually 1) will respond to an arp request.
+
+	- 0 - (default) The kernel can respond to arp requests with addresses
+	  from other interfaces. This may seem wrong but it usually makes
+	  sense, because it increases the chance of successful communication.
+	  IP addresses are owned by the complete host on Linux, not by
+	  particular interfaces. Only for more complex setups like load-
+	  balancing, does this behaviour cause problems.
+
+	arp_filter for the interface will be enabled if at least one of
+	conf/{all,interface}/arp_filter is set to TRUE,
+	it will be disabled otherwise
+
+arp_announce - INTEGER
+	Define different restriction levels for announcing the local
+	source IP address from IP packets in ARP requests sent on
+	interface:
+
+	- 0 - (default) Use any local address, configured on any interface
+	- 1 - Try to avoid local addresses that are not in the target's
+	  subnet for this interface. This mode is useful when target
+	  hosts reachable via this interface require the source IP
+	  address in ARP requests to be part of their logical network
+	  configured on the receiving interface. When we generate the
+	  request we will check all our subnets that include the
+	  target IP and will preserve the source address if it is from
+	  such subnet. If there is no such subnet we select source
+	  address according to the rules for level 2.
+	- 2 - Always use the best local address for this target.
+	  In this mode we ignore the source address in the IP packet
+	  and try to select local address that we prefer for talks with
+	  the target host. Such local address is selected by looking
+	  for primary IP addresses on all our subnets on the outgoing
+	  interface that include the target IP address. If no suitable
+	  local address is found we select the first local address
+	  we have on the outgoing interface or on all other interfaces,
+	  with the hope we will receive reply for our request and
+	  even sometimes no matter the source IP address we announce.
+
+	The max value from conf/{all,interface}/arp_announce is used.
+
+	Increasing the restriction level gives more chance for
+	receiving answer from the resolved target while decreasing
+	the level announces more valid sender's information.
+
+arp_ignore - INTEGER
+	Define different modes for sending replies in response to
+	received ARP requests that resolve local target IP addresses:
+
+	- 0 - (default): reply for any local target IP address, configured
+	  on any interface
+	- 1 - reply only if the target IP address is local address
+	  configured on the incoming interface
+	- 2 - reply only if the target IP address is local address
+	  configured on the incoming interface and both with the
+	  sender's IP address are part from same subnet on this interface
+	- 3 - do not reply for local addresses configured with scope host,
+	  only resolutions for global and link addresses are replied
+	- 4-7 - reserved
+	- 8 - do not reply for all local addresses
+
+	The max value from conf/{all,interface}/arp_ignore is used
+	when ARP request is received on the {interface}
+
+arp_notify - BOOLEAN
+	Define mode for notification of address and device changes.
+
+	 ==  ==========================================================
+	  0  (default): do nothing
+	  1  Generate gratuitous arp requests when device is brought up
+	     or hardware address changes.
+	 ==  ==========================================================
+
+arp_accept - BOOLEAN
+	Define behavior for gratuitous ARP frames who's IP is not
+	already present in the ARP table:
+
+	- 0 - don't create new entries in the ARP table
+	- 1 - create new entries in the ARP table
+
+	Both replies and requests type gratuitous arp will trigger the
+	ARP table to be updated, if this setting is on.
+
+	If the ARP table already contains the IP address of the
+	gratuitous arp frame, the arp table will be updated regardless
+	if this setting is on or off.
+
+mcast_solicit - INTEGER
+	The maximum number of multicast probes in INCOMPLETE state,
+	when the associated hardware address is unknown.  Defaults
+	to 3.
+
+ucast_solicit - INTEGER
+	The maximum number of unicast probes in PROBE state, when
+	the hardware address is being reconfirmed.  Defaults to 3.
+
+app_solicit - INTEGER
+	The maximum number of probes to send to the user space ARP daemon
+	via netlink before dropping back to multicast probes (see
+	mcast_resolicit).  Defaults to 0.
+
+mcast_resolicit - INTEGER
+	The maximum number of multicast probes after unicast and
+	app probes in PROBE state.  Defaults to 0.
+
+disable_policy - BOOLEAN
+	Disable IPSEC policy (SPD) for this interface
+
+disable_xfrm - BOOLEAN
+	Disable IPSEC encryption on this interface, whatever the policy
+
+igmpv2_unsolicited_report_interval - INTEGER
+	The interval in milliseconds in which the next unsolicited
+	IGMPv1 or IGMPv2 report retransmit will take place.
+
+	Default: 10000 (10 seconds)
+
+igmpv3_unsolicited_report_interval - INTEGER
+	The interval in milliseconds in which the next unsolicited
+	IGMPv3 report retransmit will take place.
+
+	Default: 1000 (1 seconds)
+
+promote_secondaries - BOOLEAN
+	When a primary IP address is removed from this interface
+	promote a corresponding secondary IP address instead of
+	removing all the corresponding secondary IP addresses.
+
+drop_unicast_in_l2_multicast - BOOLEAN
+	Drop any unicast IP packets that are received in link-layer
+	multicast (or broadcast) frames.
+
+	This behavior (for multicast) is actually a SHOULD in RFC
+	1122, but is disabled by default for compatibility reasons.
+
+	Default: off (0)
+
+drop_gratuitous_arp - BOOLEAN
+	Drop all gratuitous ARP frames, for example if there's a known
+	good ARP proxy on the network and such frames need not be used
+	(or in the case of 802.11, must not be used to prevent attacks.)
+
+	Default: off (0)
+
+
+tag - INTEGER
+	Allows you to write a number, which can be used as required.
+
+	Default value is 0.
+
+xfrm4_gc_thresh - INTEGER
+	(Obsolete since linux-4.14)
+	The threshold at which we will start garbage collecting for IPv4
+	destination cache entries.  At twice this value the system will
+	refuse new allocations.
+
+igmp_link_local_mcast_reports - BOOLEAN
+	Enable IGMP reports for link local multicast groups in the
+	224.0.0.X range.
+
+	Default TRUE
+
+Alexey Kuznetsov.
+kuznet@ms2.inr.ac.ru
+
+Updated by:
+
+- Andi Kleen
+  ak@muc.de
+- Nicolas Delon
+  delon.nicolas@wanadoo.fr
+
+
+
+
+/proc/sys/net/ipv6/* Variables
+==============================
+
+IPv6 has no global variables such as tcp_*.  tcp_* settings under ipv4/ also
+apply to IPv6 [XXX?].
+
+bindv6only - BOOLEAN
+	Default value for IPV6_V6ONLY socket option,
+	which restricts use of the IPv6 socket to IPv6 communication
+	only.
+
+		- TRUE: disable IPv4-mapped address feature
+		- FALSE: enable IPv4-mapped address feature
+
+	Default: FALSE (as specified in RFC3493)
+
+flowlabel_consistency - BOOLEAN
+	Protect the consistency (and unicity) of flow label.
+	You have to disable it to use IPV6_FL_F_REFLECT flag on the
+	flow label manager.
+
+	- TRUE: enabled
+	- FALSE: disabled
+
+	Default: TRUE
+
+auto_flowlabels - INTEGER
+	Automatically generate flow labels based on a flow hash of the
+	packet. This allows intermediate devices, such as routers, to
+	identify packet flows for mechanisms like Equal Cost Multipath
+	Routing (see RFC 6438).
+
+	=  ===========================================================
+	0  automatic flow labels are completely disabled
+	1  automatic flow labels are enabled by default, they can be
+	   disabled on a per socket basis using the IPV6_AUTOFLOWLABEL
+	   socket option
+	2  automatic flow labels are allowed, they may be enabled on a
+	   per socket basis using the IPV6_AUTOFLOWLABEL socket option
+	3  automatic flow labels are enabled and enforced, they cannot
+	   be disabled by the socket option
+	=  ===========================================================
+
+	Default: 1
+
+flowlabel_state_ranges - BOOLEAN
+	Split the flow label number space into two ranges. 0-0x7FFFF is
+	reserved for the IPv6 flow manager facility, 0x80000-0xFFFFF
+	is reserved for stateless flow labels as described in RFC6437.
+
+	- TRUE: enabled
+	- FALSE: disabled
+
+	Default: true
+
+flowlabel_reflect - INTEGER
+	Control flow label reflection. Needed for Path MTU
+	Discovery to work with Equal Cost Multipath Routing in anycast
+	environments. See RFC 7690 and:
+	https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01
+
+	This is a bitmask.
+
+	- 1: enabled for established flows
+
+	  Note that this prevents automatic flowlabel changes, as done
+	  in "tcp: change IPv6 flow-label upon receiving spurious retransmission"
+	  and "tcp: Change txhash on every SYN and RTO retransmit"
+
+	- 2: enabled for TCP RESET packets (no active listener)
+	  If set, a RST packet sent in response to a SYN packet on a closed
+	  port will reflect the incoming flow label.
+
+	- 4: enabled for ICMPv6 echo reply messages.
+
+	Default: 0
+
+fib_multipath_hash_policy - INTEGER
+	Controls which hash policy to use for multipath routes.
+
+	Default: 0 (Layer 3)
+
+	Possible values:
+
+	- 0 - Layer 3 (source and destination addresses plus flow label)
+	- 1 - Layer 4 (standard 5-tuple)
+	- 2 - Layer 3 or inner Layer 3 if present
+
+anycast_src_echo_reply - BOOLEAN
+	Controls the use of anycast addresses as source addresses for ICMPv6
+	echo reply
+
+	- TRUE:  enabled
+	- FALSE: disabled
+
+	Default: FALSE
+
+idgen_delay - INTEGER
+	Controls the delay in seconds after which time to retry
+	privacy stable address generation if a DAD conflict is
+	detected.
+
+	Default: 1 (as specified in RFC7217)
+
+idgen_retries - INTEGER
+	Controls the number of retries to generate a stable privacy
+	address if a DAD conflict is detected.
+
+	Default: 3 (as specified in RFC7217)
+
+mld_qrv - INTEGER
+	Controls the MLD query robustness variable (see RFC3810 9.1).
+
+	Default: 2 (as specified by RFC3810 9.1)
+
+	Minimum: 1 (as specified by RFC6636 4.5)
+
+max_dst_opts_number - INTEGER
+	Maximum number of non-padding TLVs allowed in a Destination
+	options extension header. If this value is less than zero
+	then unknown options are disallowed and the number of known
+	TLVs allowed is the absolute value of this number.
+
+	Default: 8
+
+max_hbh_opts_number - INTEGER
+	Maximum number of non-padding TLVs allowed in a Hop-by-Hop
+	options extension header. If this value is less than zero
+	then unknown options are disallowed and the number of known
+	TLVs allowed is the absolute value of this number.
+
+	Default: 8
+
+max_dst_opts_length - INTEGER
+	Maximum length allowed for a Destination options extension
+	header.
+
+	Default: INT_MAX (unlimited)
+
+max_hbh_length - INTEGER
+	Maximum length allowed for a Hop-by-Hop options extension
+	header.
+
+	Default: INT_MAX (unlimited)
+
+skip_notify_on_dev_down - BOOLEAN
+	Controls whether an RTM_DELROUTE message is generated for routes
+	removed when a device is taken down or deleted. IPv4 does not
+	generate this message; IPv6 does by default. Setting this sysctl
+	to true skips the message, making IPv4 and IPv6 on par in relying
+	on userspace caches to track link events and evict routes.
+
+	Default: false (generate message)
+
+nexthop_compat_mode - BOOLEAN
+	New nexthop API provides a means for managing nexthops independent of
+	prefixes. Backwards compatibilty with old route format is enabled by
+	default which means route dumps and notifications contain the new
+	nexthop attribute but also the full, expanded nexthop definition.
+	Further, updates or deletes of a nexthop configuration generate route
+	notifications for each fib entry using the nexthop. Once a system
+	understands the new API, this sysctl can be disabled to achieve full
+	performance benefits of the new API by disabling the nexthop expansion
+	and extraneous notifications.
+	Default: true (backward compat mode)
+
+IPv6 Fragmentation:
+
+ip6frag_high_thresh - INTEGER
+	Maximum memory used to reassemble IPv6 fragments. When
+	ip6frag_high_thresh bytes of memory is allocated for this purpose,
+	the fragment handler will toss packets until ip6frag_low_thresh
+	is reached.
+
+ip6frag_low_thresh - INTEGER
+	See ip6frag_high_thresh
+
+ip6frag_time - INTEGER
+	Time in seconds to keep an IPv6 fragment in memory.
+
+IPv6 Segment Routing:
+
+seg6_flowlabel - INTEGER
+	Controls the behaviour of computing the flowlabel of outer
+	IPv6 header in case of SR T.encaps
+
+	 == =======================================================
+	 -1  set flowlabel to zero.
+	  0  copy flowlabel from Inner packet in case of Inner IPv6
+	     (Set flowlabel to 0 in case IPv4/L2)
+	  1  Compute the flowlabel using seg6_make_flowlabel()
+	 == =======================================================
+
+	Default is 0.
+
+``conf/default/*``:
+	Change the interface-specific default settings.
+
+
+``conf/all/*``:
+	Change all the interface-specific settings.
+
+	[XXX:  Other special features than forwarding?]
+
+conf/all/forwarding - BOOLEAN
+	Enable global IPv6 forwarding between all interfaces.
+
+	IPv4 and IPv6 work differently here; e.g. netfilter must be used
+	to control which interfaces may forward packets and which not.
+
+	This also sets all interfaces' Host/Router setting
+	'forwarding' to the specified value.  See below for details.
+
+	This referred to as global forwarding.
+
+proxy_ndp - BOOLEAN
+	Do proxy ndp.
+
+fwmark_reflect - BOOLEAN
+	Controls the fwmark of kernel-generated IPv6 reply packets that are not
+	associated with a socket for example, TCP RSTs or ICMPv6 echo replies).
+	If unset, these packets have a fwmark of zero. If set, they have the
+	fwmark of the packet they are replying to.
+
+	Default: 0
+
+``conf/interface/*``:
+	Change special settings per interface.
+
+	The functional behaviour for certain settings is different
+	depending on whether local forwarding is enabled or not.
+
+accept_ra - INTEGER
+	Accept Router Advertisements; autoconfigure using them.
+
+	It also determines whether or not to transmit Router
+	Solicitations. If and only if the functional setting is to
+	accept Router Advertisements, Router Solicitations will be
+	transmitted.
+
+	Possible values are:
+
+		==  ===========================================================
+		 0  Do not accept Router Advertisements.
+		 1  Accept Router Advertisements if forwarding is disabled.
+		 2  Overrule forwarding behaviour. Accept Router Advertisements
+		    even if forwarding is enabled.
+		==  ===========================================================
+
+	Functional default:
+
+		- enabled if local forwarding is disabled.
+		- disabled if local forwarding is enabled.
+
+accept_ra_defrtr - BOOLEAN
+	Learn default router in Router Advertisement.
+
+	Functional default:
+
+		- enabled if accept_ra is enabled.
+		- disabled if accept_ra is disabled.
+
+accept_ra_from_local - BOOLEAN
+	Accept RA with source-address that is found on local machine
+	if the RA is otherwise proper and able to be accepted.
+
+	Default is to NOT accept these as it may be an un-intended
+	network loop.
+
+	Functional default:
+
+	   - enabled if accept_ra_from_local is enabled
+	     on a specific interface.
+	   - disabled if accept_ra_from_local is disabled
+	     on a specific interface.
+
+accept_ra_min_hop_limit - INTEGER
+	Minimum hop limit Information in Router Advertisement.
+
+	Hop limit Information in Router Advertisement less than this
+	variable shall be ignored.
+
+	Default: 1
+
+accept_ra_pinfo - BOOLEAN
+	Learn Prefix Information in Router Advertisement.
+
+	Functional default:
+
+		- enabled if accept_ra is enabled.
+		- disabled if accept_ra is disabled.
+
+accept_ra_rt_info_min_plen - INTEGER
+	Minimum prefix length of Route Information in RA.
+
+	Route Information w/ prefix smaller than this variable shall
+	be ignored.
+
+	Functional default:
+
+		* 0 if accept_ra_rtr_pref is enabled.
+		* -1 if accept_ra_rtr_pref is disabled.
+
+accept_ra_rt_info_max_plen - INTEGER
+	Maximum prefix length of Route Information in RA.
+
+	Route Information w/ prefix larger than this variable shall
+	be ignored.
+
+	Functional default:
+
+		* 0 if accept_ra_rtr_pref is enabled.
+		* -1 if accept_ra_rtr_pref is disabled.
+
+accept_ra_rtr_pref - BOOLEAN
+	Accept Router Preference in RA.
+
+	Functional default:
+
+		- enabled if accept_ra is enabled.
+		- disabled if accept_ra is disabled.
+
+accept_ra_mtu - BOOLEAN
+	Apply the MTU value specified in RA option 5 (RFC4861). If
+	disabled, the MTU specified in the RA will be ignored.
+
+	Functional default:
+
+		- enabled if accept_ra is enabled.
+		- disabled if accept_ra is disabled.
+
+accept_redirects - BOOLEAN
+	Accept Redirects.
+
+	Functional default:
+
+		- enabled if local forwarding is disabled.
+		- disabled if local forwarding is enabled.
+
+accept_source_route - INTEGER
+	Accept source routing (routing extension header).
+
+	- >= 0: Accept only routing header type 2.
+	- < 0: Do not accept routing header.
+
+	Default: 0
+
+autoconf - BOOLEAN
+	Autoconfigure addresses using Prefix Information in Router
+	Advertisements.
+
+	Functional default:
+
+		- enabled if accept_ra_pinfo is enabled.
+		- disabled if accept_ra_pinfo is disabled.
+
+dad_transmits - INTEGER
+	The amount of Duplicate Address Detection probes to send.
+
+	Default: 1
+
+forwarding - INTEGER
+	Configure interface-specific Host/Router behaviour.
+
+	.. note::
+
+	   It is recommended to have the same setting on all
+	   interfaces; mixed router/host scenarios are rather uncommon.
+
+	Possible values are:
+
+		- 0 Forwarding disabled
+		- 1 Forwarding enabled
+
+	**FALSE (0)**:
+
+	By default, Host behaviour is assumed.  This means:
+
+	1. IsRouter flag is not set in Neighbour Advertisements.
+	2. If accept_ra is TRUE (default), transmit Router
+	   Solicitations.
+	3. If accept_ra is TRUE (default), accept Router
+	   Advertisements (and do autoconfiguration).
+	4. If accept_redirects is TRUE (default), accept Redirects.
+
+	**TRUE (1)**:
+
+	If local forwarding is enabled, Router behaviour is assumed.
+	This means exactly the reverse from the above:
+
+	1. IsRouter flag is set in Neighbour Advertisements.
+	2. Router Solicitations are not sent unless accept_ra is 2.
+	3. Router Advertisements are ignored unless accept_ra is 2.
+	4. Redirects are ignored.
+
+	Default: 0 (disabled) if global forwarding is disabled (default),
+	otherwise 1 (enabled).
+
+hop_limit - INTEGER
+	Default Hop Limit to set.
+
+	Default: 64
+
+mtu - INTEGER
+	Default Maximum Transfer Unit
+
+	Default: 1280 (IPv6 required minimum)
+
+ip_nonlocal_bind - BOOLEAN
+	If set, allows processes to bind() to non-local IPv6 addresses,
+	which can be quite useful - but may break some applications.
+
+	Default: 0
+
+router_probe_interval - INTEGER
+	Minimum interval (in seconds) between Router Probing described
+	in RFC4191.
+
+	Default: 60
+
+router_solicitation_delay - INTEGER
+	Number of seconds to wait after interface is brought up
+	before sending Router Solicitations.
+
+	Default: 1
+
+router_solicitation_interval - INTEGER
+	Number of seconds to wait between Router Solicitations.
+
+	Default: 4
+
+router_solicitations - INTEGER
+	Number of Router Solicitations to send until assuming no
+	routers are present.
+
+	Default: 3
+
+use_oif_addrs_only - BOOLEAN
+	When enabled, the candidate source addresses for destinations
+	routed via this interface are restricted to the set of addresses
+	configured on this interface (vis. RFC 6724, section 4).
+
+	Default: false
+
+use_tempaddr - INTEGER
+	Preference for Privacy Extensions (RFC3041).
+
+	  * <= 0 : disable Privacy Extensions
+	  * == 1 : enable Privacy Extensions, but prefer public
+	    addresses over temporary addresses.
+	  * >  1 : enable Privacy Extensions and prefer temporary
+	    addresses over public addresses.
+
+	Default:
+
+		* 0 (for most devices)
+		* -1 (for point-to-point devices and loopback devices)
+
+temp_valid_lft - INTEGER
+	valid lifetime (in seconds) for temporary addresses.
+
+	Default: 604800 (7 days)
+
+temp_prefered_lft - INTEGER
+	Preferred lifetime (in seconds) for temporary addresses.
+
+	Default: 86400 (1 day)
+
+keep_addr_on_down - INTEGER
+	Keep all IPv6 addresses on an interface down event. If set static
+	global addresses with no expiration time are not flushed.
+
+	*   >0 : enabled
+	*    0 : system default
+	*   <0 : disabled
+
+	Default: 0 (addresses are removed)
+
+max_desync_factor - INTEGER
+	Maximum value for DESYNC_FACTOR, which is a random value
+	that ensures that clients don't synchronize with each
+	other and generate new addresses at exactly the same time.
+	value is in seconds.
+
+	Default: 600
+
+regen_max_retry - INTEGER
+	Number of attempts before give up attempting to generate
+	valid temporary addresses.
+
+	Default: 5
+
+max_addresses - INTEGER
+	Maximum number of autoconfigured addresses per interface.  Setting
+	to zero disables the limitation.  It is not recommended to set this
+	value too large (or to zero) because it would be an easy way to
+	crash the kernel by allowing too many addresses to be created.
+
+	Default: 16
+
+disable_ipv6 - BOOLEAN
+	Disable IPv6 operation.  If accept_dad is set to 2, this value
+	will be dynamically set to TRUE if DAD fails for the link-local
+	address.
+
+	Default: FALSE (enable IPv6 operation)
+
+	When this value is changed from 1 to 0 (IPv6 is being enabled),
+	it will dynamically create a link-local address on the given
+	interface and start Duplicate Address Detection, if necessary.
+
+	When this value is changed from 0 to 1 (IPv6 is being disabled),
+	it will dynamically delete all addresses and routes on the given
+	interface. From now on it will not possible to add addresses/routes
+	to the selected interface.
+
+accept_dad - INTEGER
+	Whether to accept DAD (Duplicate Address Detection).
+
+	 == ==============================================================
+	  0  Disable DAD
+	  1  Enable DAD (default)
+	  2  Enable DAD, and disable IPv6 operation if MAC-based duplicate
+	     link-local address has been found.
+	 == ==============================================================
+
+	DAD operation and mode on a given interface will be selected according
+	to the maximum value of conf/{all,interface}/accept_dad.
+
+force_tllao - BOOLEAN
+	Enable sending the target link-layer address option even when
+	responding to a unicast neighbor solicitation.
+
+	Default: FALSE
+
+	Quoting from RFC 2461, section 4.4, Target link-layer address:
+
+	"The option MUST be included for multicast solicitations in order to
+	avoid infinite Neighbor Solicitation "recursion" when the peer node
+	does not have a cache entry to return a Neighbor Advertisements
+	message.  When responding to unicast solicitations, the option can be
+	omitted since the sender of the solicitation has the correct link-
+	layer address; otherwise it would not have be able to send the unicast
+	solicitation in the first place. However, including the link-layer
+	address in this case adds little overhead and eliminates a potential
+	race condition where the sender deletes the cached link-layer address
+	prior to receiving a response to a previous solicitation."
+
+ndisc_notify - BOOLEAN
+	Define mode for notification of address and device changes.
+
+	* 0 - (default): do nothing
+	* 1 - Generate unsolicited neighbour advertisements when device is brought
+	  up or hardware address changes.
+
+ndisc_tclass - INTEGER
+	The IPv6 Traffic Class to use by default when sending IPv6 Neighbor
+	Discovery (Router Solicitation, Router Advertisement, Neighbor
+	Solicitation, Neighbor Advertisement, Redirect) messages.
+	These 8 bits can be interpreted as 6 high order bits holding the DSCP
+	value and 2 low order bits representing ECN (which you probably want
+	to leave cleared).
+
+	* 0 - (default)
+
+mldv1_unsolicited_report_interval - INTEGER
+	The interval in milliseconds in which the next unsolicited
+	MLDv1 report retransmit will take place.
+
+	Default: 10000 (10 seconds)
+
+mldv2_unsolicited_report_interval - INTEGER
+	The interval in milliseconds in which the next unsolicited
+	MLDv2 report retransmit will take place.
+
+	Default: 1000 (1 second)
+
+force_mld_version - INTEGER
+	* 0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
+	* 1 - Enforce to use MLD version 1
+	* 2 - Enforce to use MLD version 2
+
+suppress_frag_ndisc - INTEGER
+	Control RFC 6980 (Security Implications of IPv6 Fragmentation
+	with IPv6 Neighbor Discovery) behavior:
+
+	* 1 - (default) discard fragmented neighbor discovery packets
+	* 0 - allow fragmented neighbor discovery packets
+
+optimistic_dad - BOOLEAN
+	Whether to perform Optimistic Duplicate Address Detection (RFC 4429).
+
+	* 0: disabled (default)
+	* 1: enabled
+
+	Optimistic Duplicate Address Detection for the interface will be enabled
+	if at least one of conf/{all,interface}/optimistic_dad is set to 1,
+	it will be disabled otherwise.
+
+use_optimistic - BOOLEAN
+	If enabled, do not classify optimistic addresses as deprecated during
+	source address selection.  Preferred addresses will still be chosen
+	before optimistic addresses, subject to other ranking in the source
+	address selection algorithm.
+
+	* 0: disabled (default)
+	* 1: enabled
+
+	This will be enabled if at least one of
+	conf/{all,interface}/use_optimistic is set to 1, disabled otherwise.
+
+stable_secret - IPv6 address
+	This IPv6 address will be used as a secret to generate IPv6
+	addresses for link-local addresses and autoconfigured
+	ones. All addresses generated after setting this secret will
+	be stable privacy ones by default. This can be changed via the
+	addrgenmode ip-link. conf/default/stable_secret is used as the
+	secret for the namespace, the interface specific ones can
+	overwrite that. Writes to conf/all/stable_secret are refused.
+
+	It is recommended to generate this secret during installation
+	of a system and keep it stable after that.
+
+	By default the stable secret is unset.
+
+addr_gen_mode - INTEGER
+	Defines how link-local and autoconf addresses are generated.
+
+	=  =================================================================
+	0  generate address based on EUI64 (default)
+	1  do no generate a link-local address, use EUI64 for addresses
+	   generated from autoconf
+	2  generate stable privacy addresses, using the secret from
+	   stable_secret (RFC7217)
+	3  generate stable privacy addresses, using a random secret if unset
+	=  =================================================================
+
+drop_unicast_in_l2_multicast - BOOLEAN
+	Drop any unicast IPv6 packets that are received in link-layer
+	multicast (or broadcast) frames.
+
+	By default this is turned off.
+
+drop_unsolicited_na - BOOLEAN
+	Drop all unsolicited neighbor advertisements, for example if there's
+	a known good NA proxy on the network and such frames need not be used
+	(or in the case of 802.11, must not be used to prevent attacks.)
+
+	By default this is turned off.
+
+enhanced_dad - BOOLEAN
+	Include a nonce option in the IPv6 neighbor solicitation messages used for
+	duplicate address detection per RFC7527. A received DAD NS will only signal
+	a duplicate address if the nonce is different. This avoids any false
+	detection of duplicates due to loopback of the NS messages that we send.
+	The nonce option will be sent on an interface unless both of
+	conf/{all,interface}/enhanced_dad are set to FALSE.
+
+	Default: TRUE
+
+``icmp/*``:
+===========
+
+ratelimit - INTEGER
+	Limit the maximal rates for sending ICMPv6 messages.
+
+	0 to disable any limiting,
+	otherwise the minimal space between responses in milliseconds.
+
+	Default: 1000
+
+ratemask - list of comma separated ranges
+	For ICMPv6 message types matching the ranges in the ratemask, limit
+	the sending of the message according to ratelimit parameter.
+
+	The format used for both input and output is a comma separated
+	list of ranges (e.g. "0-127,129" for ICMPv6 message type 0 to 127 and
+	129). Writing to the file will clear all previous ranges of ICMPv6
+	message types and update the current list with the input.
+
+	Refer to: https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml
+	for numerical values of ICMPv6 message types, e.g. echo request is 128
+	and echo reply is 129.
+
+	Default: 0-1,3-127 (rate limit ICMPv6 errors except Packet Too Big)
+
+echo_ignore_all - BOOLEAN
+	If set non-zero, then the kernel will ignore all ICMP ECHO
+	requests sent to it over the IPv6 protocol.
+
+	Default: 0
+
+echo_ignore_multicast - BOOLEAN
+	If set non-zero, then the kernel will ignore all ICMP ECHO
+	requests sent to it over the IPv6 protocol via multicast.
+
+	Default: 0
+
+echo_ignore_anycast - BOOLEAN
+	If set non-zero, then the kernel will ignore all ICMP ECHO
+	requests sent to it over the IPv6 protocol destined to anycast address.
+
+	Default: 0
+
+xfrm6_gc_thresh - INTEGER
+	(Obsolete since linux-4.14)
+	The threshold at which we will start garbage collecting for IPv6
+	destination cache entries.  At twice this value the system will
+	refuse new allocations.
+
+
+IPv6 Update by:
+Pekka Savola <pekkas@netcore.fi>
+YOSHIFUJI Hideaki / USAGI Project <yoshfuji@linux-ipv6.org>
+
+
+/proc/sys/net/bridge/* Variables:
+=================================
+
+bridge-nf-call-arptables - BOOLEAN
+	- 1 : pass bridged ARP traffic to arptables' FORWARD chain.
+	- 0 : disable this.
+
+	Default: 1
+
+bridge-nf-call-iptables - BOOLEAN
+	- 1 : pass bridged IPv4 traffic to iptables' chains.
+	- 0 : disable this.
+
+	Default: 1
+
+bridge-nf-call-ip6tables - BOOLEAN
+	- 1 : pass bridged IPv6 traffic to ip6tables' chains.
+	- 0 : disable this.
+
+	Default: 1
+
+bridge-nf-filter-vlan-tagged - BOOLEAN
+	- 1 : pass bridged vlan-tagged ARP/IP/IPv6 traffic to {arp,ip,ip6}tables.
+	- 0 : disable this.
+
+	Default: 0
+
+bridge-nf-filter-pppoe-tagged - BOOLEAN
+	- 1 : pass bridged pppoe-tagged IP/IPv6 traffic to {ip,ip6}tables.
+	- 0 : disable this.
+
+	Default: 0
+
+bridge-nf-pass-vlan-input-dev - BOOLEAN
+	- 1: if bridge-nf-filter-vlan-tagged is enabled, try to find a vlan
+	  interface on the bridge and set the netfilter input device to the
+	  vlan. This allows use of e.g. "iptables -i br0.1" and makes the
+	  REDIRECT target work with vlan-on-top-of-bridge interfaces.  When no
+	  matching vlan interface is found, or this switch is off, the input
+	  device is set to the bridge interface.
+
+	- 0: disable bridge netfilter vlan interface lookup.
+
+	Default: 0
+
+``proc/sys/net/sctp/*`` Variables:
+==================================
+
+addip_enable - BOOLEAN
+	Enable or disable extension of  Dynamic Address Reconfiguration
+	(ADD-IP) functionality specified in RFC5061.  This extension provides
+	the ability to dynamically add and remove new addresses for the SCTP
+	associations.
+
+	1: Enable extension.
+
+	0: Disable extension.
+
+	Default: 0
+
+pf_enable - INTEGER
+	Enable or disable pf (pf is short for potentially failed) state. A value
+	of pf_retrans > path_max_retrans also disables pf state. That is, one of
+	both pf_enable and pf_retrans > path_max_retrans can disable pf state.
+	Since pf_retrans and path_max_retrans can be changed by userspace
+	application, sometimes user expects to disable pf state by the value of
+	pf_retrans > path_max_retrans, but occasionally the value of pf_retrans
+	or path_max_retrans is changed by the user application, this pf state is
+	enabled. As such, it is necessary to add this to dynamically enable
+	and disable pf state. See:
+	https://datatracker.ietf.org/doc/draft-ietf-tsvwg-sctp-failover for
+	details.
+
+	1: Enable pf.
+
+	0: Disable pf.
+
+	Default: 1
+
+pf_expose - INTEGER
+	Unset or enable/disable pf (pf is short for potentially failed) state
+	exposure.  Applications can control the exposure of the PF path state
+	in the SCTP_PEER_ADDR_CHANGE event and the SCTP_GET_PEER_ADDR_INFO
+	sockopt.   When it's unset, no SCTP_PEER_ADDR_CHANGE event with
+	SCTP_ADDR_PF state will be sent and a SCTP_PF-state transport info
+	can be got via SCTP_GET_PEER_ADDR_INFO sockopt;  When it's enabled,
+	a SCTP_PEER_ADDR_CHANGE event will be sent for a transport becoming
+	SCTP_PF state and a SCTP_PF-state transport info can be got via
+	SCTP_GET_PEER_ADDR_INFO sockopt;  When it's diabled, no
+	SCTP_PEER_ADDR_CHANGE event will be sent and it returns -EACCES when
+	trying to get a SCTP_PF-state transport info via SCTP_GET_PEER_ADDR_INFO
+	sockopt.
+
+	0: Unset pf state exposure, Compatible with old applications.
+
+	1: Disable pf state exposure.
+
+	2: Enable pf state exposure.
+
+	Default: 0
+
+addip_noauth_enable - BOOLEAN
+	Dynamic Address Reconfiguration (ADD-IP) requires the use of
+	authentication to protect the operations of adding or removing new
+	addresses.  This requirement is mandated so that unauthorized hosts
+	would not be able to hijack associations.  However, older
+	implementations may not have implemented this requirement while
+	allowing the ADD-IP extension.  For reasons of interoperability,
+	we provide this variable to control the enforcement of the
+	authentication requirement.
+
+	== ===============================================================
+	1  Allow ADD-IP extension to be used without authentication.  This
+	   should only be set in a closed environment for interoperability
+	   with older implementations.
+
+	0  Enforce the authentication requirement
+	== ===============================================================
+
+	Default: 0
+
+auth_enable - BOOLEAN
+	Enable or disable Authenticated Chunks extension.  This extension
+	provides the ability to send and receive authenticated chunks and is
+	required for secure operation of Dynamic Address Reconfiguration
+	(ADD-IP) extension.
+
+	- 1: Enable this extension.
+	- 0: Disable this extension.
+
+	Default: 0
+
+prsctp_enable - BOOLEAN
+	Enable or disable the Partial Reliability extension (RFC3758) which
+	is used to notify peers that a given DATA should no longer be expected.
+
+	- 1: Enable extension
+	- 0: Disable
+
+	Default: 1
+
+max_burst - INTEGER
+	The limit of the number of new packets that can be initially sent.  It
+	controls how bursty the generated traffic can be.
+
+	Default: 4
+
+association_max_retrans - INTEGER
+	Set the maximum number for retransmissions that an association can
+	attempt deciding that the remote end is unreachable.  If this value
+	is exceeded, the association is terminated.
+
+	Default: 10
+
+max_init_retransmits - INTEGER
+	The maximum number of retransmissions of INIT and COOKIE-ECHO chunks
+	that an association will attempt before declaring the destination
+	unreachable and terminating.
+
+	Default: 8
+
+path_max_retrans - INTEGER
+	The maximum number of retransmissions that will be attempted on a given
+	path.  Once this threshold is exceeded, the path is considered
+	unreachable, and new traffic will use a different path when the
+	association is multihomed.
+
+	Default: 5
+
+pf_retrans - INTEGER
+	The number of retransmissions that will be attempted on a given path
+	before traffic is redirected to an alternate transport (should one
+	exist).  Note this is distinct from path_max_retrans, as a path that
+	passes the pf_retrans threshold can still be used.  Its only
+	deprioritized when a transmission path is selected by the stack.  This
+	setting is primarily used to enable fast failover mechanisms without
+	having to reduce path_max_retrans to a very low value.  See:
+	http://www.ietf.org/id/draft-nishida-tsvwg-sctp-failover-05.txt
+	for details.  Note also that a value of pf_retrans > path_max_retrans
+	disables this feature. Since both pf_retrans and path_max_retrans can
+	be changed by userspace application, a variable pf_enable is used to
+	disable pf state.
+
+	Default: 0
+
+ps_retrans - INTEGER
+	Primary.Switchover.Max.Retrans (PSMR), it's a tunable parameter coming
+	from section-5 "Primary Path Switchover" in rfc7829.  The primary path
+	will be changed to another active path when the path error counter on
+	the old primary path exceeds PSMR, so that "the SCTP sender is allowed
+	to continue data transmission on a new working path even when the old
+	primary destination address becomes active again".   Note this feature
+	is disabled by initializing 'ps_retrans' per netns as 0xffff by default,
+	and its value can't be less than 'pf_retrans' when changing by sysctl.
+
+	Default: 0xffff
+
+rto_initial - INTEGER
+	The initial round trip timeout value in milliseconds that will be used
+	in calculating round trip times.  This is the initial time interval
+	for retransmissions.
+
+	Default: 3000
+
+rto_max - INTEGER
+	The maximum value (in milliseconds) of the round trip timeout.  This
+	is the largest time interval that can elapse between retransmissions.
+
+	Default: 60000
+
+rto_min - INTEGER
+	The minimum value (in milliseconds) of the round trip timeout.  This
+	is the smallest time interval the can elapse between retransmissions.
+
+	Default: 1000
+
+hb_interval - INTEGER
+	The interval (in milliseconds) between HEARTBEAT chunks.  These chunks
+	are sent at the specified interval on idle paths to probe the state of
+	a given path between 2 associations.
+
+	Default: 30000
+
+sack_timeout - INTEGER
+	The amount of time (in milliseconds) that the implementation will wait
+	to send a SACK.
+
+	Default: 200
+
+valid_cookie_life - INTEGER
+	The default lifetime of the SCTP cookie (in milliseconds).  The cookie
+	is used during association establishment.
+
+	Default: 60000
+
+cookie_preserve_enable - BOOLEAN
+	Enable or disable the ability to extend the lifetime of the SCTP cookie
+	that is used during the establishment phase of SCTP association
+
+	- 1: Enable cookie lifetime extension.
+	- 0: Disable
+
+	Default: 1
+
+cookie_hmac_alg - STRING
+	Select the hmac algorithm used when generating the cookie value sent by
+	a listening sctp socket to a connecting client in the INIT-ACK chunk.
+	Valid values are:
+
+	* md5
+	* sha1
+	* none
+
+	Ability to assign md5 or sha1 as the selected alg is predicated on the
+	configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
+	CONFIG_CRYPTO_SHA1).
+
+	Default: Dependent on configuration.  MD5 if available, else SHA1 if
+	available, else none.
+
+rcvbuf_policy - INTEGER
+	Determines if the receive buffer is attributed to the socket or to
+	association.   SCTP supports the capability to create multiple
+	associations on a single socket.  When using this capability, it is
+	possible that a single stalled association that's buffering a lot
+	of data may block other associations from delivering their data by
+	consuming all of the receive buffer space.  To work around this,
+	the rcvbuf_policy could be set to attribute the receiver buffer space
+	to each association instead of the socket.  This prevents the described
+	blocking.
+
+	- 1: rcvbuf space is per association
+	- 0: rcvbuf space is per socket
+
+	Default: 0
+
+sndbuf_policy - INTEGER
+	Similar to rcvbuf_policy above, this applies to send buffer space.
+
+	- 1: Send buffer is tracked per association
+	- 0: Send buffer is tracked per socket.
+
+	Default: 0
+
+sctp_mem - vector of 3 INTEGERs: min, pressure, max
+	Number of pages allowed for queueing by all SCTP sockets.
+
+	min: Below this number of pages SCTP is not bothered about its
+	memory appetite. When amount of memory allocated by SCTP exceeds
+	this number, SCTP starts to moderate memory usage.
+
+	pressure: This value was introduced to follow format of tcp_mem.
+
+	max: Number of pages allowed for queueing by all SCTP sockets.
+
+	Default is calculated at boot time from amount of available memory.
+
+sctp_rmem - vector of 3 INTEGERs: min, default, max
+	Only the first value ("min") is used, "default" and "max" are
+	ignored.
+
+	min: Minimal size of receive buffer used by SCTP socket.
+	It is guaranteed to each SCTP socket (but not association) even
+	under moderate memory pressure.
+
+	Default: 4K
+
+sctp_wmem  - vector of 3 INTEGERs: min, default, max
+	Currently this tunable has no effect.
+
+addr_scope_policy - INTEGER
+	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
+
+	- 0   - Disable IPv4 address scoping
+	- 1   - Enable IPv4 address scoping
+	- 2   - Follow draft but allow IPv4 private addresses
+	- 3   - Follow draft but allow IPv4 link local addresses
+
+	Default: 1
+
+
+``/proc/sys/net/core/*``
+========================
+
+	Please see: Documentation/admin-guide/sysctl/net.rst for descriptions of these entries.
+
+
+``/proc/sys/net/unix/*``
+========================
+
+max_dgram_qlen - INTEGER
+	The maximum length of dgram socket receive queue
+
+	Default: 10
+
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
deleted file mode 100644
index 9375324aa8e1..000000000000
--- a/Documentation/networking/ip-sysctl.txt
+++ /dev/null
@@ -1,2362 +0,0 @@
-/proc/sys/net/ipv4/* Variables:
-
-ip_forward - BOOLEAN
-	0 - disabled (default)
-	not 0 - enabled
-
-	Forward Packets between interfaces.
-
-	This variable is special, its change resets all configuration
-	parameters to their default state (RFC1122 for hosts, RFC1812
-	for routers)
-
-ip_default_ttl - INTEGER
-	Default value of TTL field (Time To Live) for outgoing (but not
-	forwarded) IP packets. Should be between 1 and 255 inclusive.
-	Default: 64 (as recommended by RFC1700)
-
-ip_no_pmtu_disc - INTEGER
-	Disable Path MTU Discovery. If enabled in mode 1 and a
-	fragmentation-required ICMP is received, the PMTU to this
-	destination will be set to min_pmtu (see below). You will need
-	to raise min_pmtu to the smallest interface MTU on your system
-	manually if you want to avoid locally generated fragments.
-
-	In mode 2 incoming Path MTU Discovery messages will be
-	discarded. Outgoing frames are handled the same as in mode 1,
-	implicitly setting IP_PMTUDISC_DONT on every created socket.
-
-	Mode 3 is a hardened pmtu discover mode. The kernel will only
-	accept fragmentation-needed errors if the underlying protocol
-	can verify them besides a plain socket lookup. Current
-	protocols for which pmtu events will be honored are TCP, SCTP
-	and DCCP as they verify e.g. the sequence number or the
-	association. This mode should not be enabled globally but is
-	only intended to secure e.g. name servers in namespaces where
-	TCP path mtu must still work but path MTU information of other
-	protocols should be discarded. If enabled globally this mode
-	could break other protocols.
-
-	Possible values: 0-3
-	Default: FALSE
-
-min_pmtu - INTEGER
-	default 552 - minimum discovered Path MTU
-
-ip_forward_use_pmtu - BOOLEAN
-	By default we don't trust protocol path MTUs while forwarding
-	because they could be easily forged and can lead to unwanted
-	fragmentation by the router.
-	You only need to enable this if you have user-space software
-	which tries to discover path mtus by itself and depends on the
-	kernel honoring this information. This is normally not the
-	case.
-	Default: 0 (disabled)
-	Possible values:
-	0 - disabled
-	1 - enabled
-
-fwmark_reflect - BOOLEAN
-	Controls the fwmark of kernel-generated IPv4 reply packets that are not
-	associated with a socket for example, TCP RSTs or ICMP echo replies).
-	If unset, these packets have a fwmark of zero. If set, they have the
-	fwmark of the packet they are replying to.
-	Default: 0
-
-fib_multipath_use_neigh - BOOLEAN
-	Use status of existing neighbor entry when determining nexthop for
-	multipath routes. If disabled, neighbor information is not used and
-	packets could be directed to a failed nexthop. Only valid for kernels
-	built with CONFIG_IP_ROUTE_MULTIPATH enabled.
-	Default: 0 (disabled)
-	Possible values:
-	0 - disabled
-	1 - enabled
-
-fib_multipath_hash_policy - INTEGER
-	Controls which hash policy to use for multipath routes. Only valid
-	for kernels built with CONFIG_IP_ROUTE_MULTIPATH enabled.
-	Default: 0 (Layer 3)
-	Possible values:
-	0 - Layer 3
-	1 - Layer 4
-	2 - Layer 3 or inner Layer 3 if present
-
-fib_sync_mem - UNSIGNED INTEGER
-	Amount of dirty memory from fib entries that can be backlogged before
-	synchronize_rcu is forced.
-	  Default: 512kB   Minimum: 64kB   Maximum: 64MB
-
-ip_forward_update_priority - INTEGER
-	Whether to update SKB priority from "TOS" field in IPv4 header after it
-	is forwarded. The new SKB priority is mapped from TOS field value
-	according to an rt_tos2priority table (see e.g. man tc-prio).
-	Default: 1 (Update priority.)
-	Possible values:
-	0 - Do not update priority.
-	1 - Update priority.
-
-route/max_size - INTEGER
-	Maximum number of routes allowed in the kernel.  Increase
-	this when using large numbers of interfaces and/or routes.
-	From linux kernel 3.6 onwards, this is deprecated for ipv4
-	as route cache is no longer used.
-
-neigh/default/gc_thresh1 - INTEGER
-	Minimum number of entries to keep.  Garbage collector will not
-	purge entries if there are fewer than this number.
-	Default: 128
-
-neigh/default/gc_thresh2 - INTEGER
-	Threshold when garbage collector becomes more aggressive about
-	purging entries. Entries older than 5 seconds will be cleared
-	when over this number.
-	Default: 512
-
-neigh/default/gc_thresh3 - INTEGER
-	Maximum number of non-PERMANENT neighbor entries allowed.  Increase
-	this when using large numbers of interfaces and when communicating
-	with large numbers of directly-connected peers.
-	Default: 1024
-
-neigh/default/unres_qlen_bytes - INTEGER
-	The maximum number of bytes which may be used by packets
-	queued for each	unresolved address by other network layers.
-	(added in linux 3.3)
-	Setting negative value is meaningless and will return error.
-	Default: SK_WMEM_MAX, (same as net.core.wmem_default).
-		Exact value depends on architecture and kernel options,
-		but should be enough to allow queuing 256 packets
-		of medium size.
-
-neigh/default/unres_qlen - INTEGER
-	The maximum number of packets which may be queued for each
-	unresolved address by other network layers.
-	(deprecated in linux 3.3) : use unres_qlen_bytes instead.
-	Prior to linux 3.3, the default value is 3 which may cause
-	unexpected packet loss. The current default value is calculated
-	according to default value of unres_qlen_bytes and true size of
-	packet.
-	Default: 101
-
-mtu_expires - INTEGER
-	Time, in seconds, that cached PMTU information is kept.
-
-min_adv_mss - INTEGER
-	The advertised MSS depends on the first hop route MTU, but will
-	never be lower than this setting.
-
-IP Fragmentation:
-
-ipfrag_high_thresh - LONG INTEGER
-	Maximum memory used to reassemble IP fragments.
-
-ipfrag_low_thresh - LONG INTEGER
-	(Obsolete since linux-4.17)
-	Maximum memory used to reassemble IP fragments before the kernel
-	begins to remove incomplete fragment queues to free up resources.
-	The kernel still accepts new fragments for defragmentation.
-
-ipfrag_time - INTEGER
-	Time in seconds to keep an IP fragment in memory.
-
-ipfrag_max_dist - INTEGER
-	ipfrag_max_dist is a non-negative integer value which defines the
-	maximum "disorder" which is allowed among fragments which share a
-	common IP source address. Note that reordering of packets is
-	not unusual, but if a large number of fragments arrive from a source
-	IP address while a particular fragment queue remains incomplete, it
-	probably indicates that one or more fragments belonging to that queue
-	have been lost. When ipfrag_max_dist is positive, an additional check
-	is done on fragments before they are added to a reassembly queue - if
-	ipfrag_max_dist (or more) fragments have arrived from a particular IP
-	address between additions to any IP fragment queue using that source
-	address, it's presumed that one or more fragments in the queue are
-	lost. The existing fragment queue will be dropped, and a new one
-	started. An ipfrag_max_dist value of zero disables this check.
-
-	Using a very small value, e.g. 1 or 2, for ipfrag_max_dist can
-	result in unnecessarily dropping fragment queues when normal
-	reordering of packets occurs, which could lead to poor application
-	performance. Using a very large value, e.g. 50000, increases the
-	likelihood of incorrectly reassembling IP fragments that originate
-	from different IP datagrams, which could result in data corruption.
-	Default: 64
-
-INET peer storage:
-
-inet_peer_threshold - INTEGER
-	The approximate size of the storage.  Starting from this threshold
-	entries will be thrown aggressively.  This threshold also determines
-	entries' time-to-live and time intervals between garbage collection
-	passes.  More entries, less time-to-live, less GC interval.
-
-inet_peer_minttl - INTEGER
-	Minimum time-to-live of entries.  Should be enough to cover fragment
-	time-to-live on the reassembling side.  This minimum time-to-live  is
-	guaranteed if the pool size is less than inet_peer_threshold.
-	Measured in seconds.
-
-inet_peer_maxttl - INTEGER
-	Maximum time-to-live of entries.  Unused entries will expire after
-	this period of time if there is no memory pressure on the pool (i.e.
-	when the number of entries in the pool is very small).
-	Measured in seconds.
-
-TCP variables:
-
-somaxconn - INTEGER
-	Limit of socket listen() backlog, known in userspace as SOMAXCONN.
-	Defaults to 4096. (Was 128 before linux-5.4)
-	See also tcp_max_syn_backlog for additional tuning for TCP sockets.
-
-tcp_abort_on_overflow - BOOLEAN
-	If listening service is too slow to accept new connections,
-	reset them. Default state is FALSE. It means that if overflow
-	occurred due to a burst, connection will recover. Enable this
-	option _only_ if you are really sure that listening daemon
-	cannot be tuned to accept connections faster. Enabling this
-	option can harm clients of your server.
-
-tcp_adv_win_scale - INTEGER
-	Count buffering overhead as bytes/2^tcp_adv_win_scale
-	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
-	if it is <= 0.
-	Possible values are [-31, 31], inclusive.
-	Default: 1
-
-tcp_allowed_congestion_control - STRING
-	Show/set the congestion control choices available to non-privileged
-	processes. The list is a subset of those listed in
-	tcp_available_congestion_control.
-	Default is "reno" and the default setting (tcp_congestion_control).
-
-tcp_app_win - INTEGER
-	Reserve max(window/2^tcp_app_win, mss) of window for application
-	buffer. Value 0 is special, it means that nothing is reserved.
-	Default: 31
-
-tcp_autocorking - BOOLEAN
-	Enable TCP auto corking :
-	When applications do consecutive small write()/sendmsg() system calls,
-	we try to coalesce these small writes as much as possible, to lower
-	total amount of sent packets. This is done if at least one prior
-	packet for the flow is waiting in Qdisc queues or device transmit
-	queue. Applications can still use TCP_CORK for optimal behavior
-	when they know how/when to uncork their sockets.
-	Default : 1
-
-tcp_available_congestion_control - STRING
-	Shows the available congestion control choices that are registered.
-	More congestion control algorithms may be available as modules,
-	but not loaded.
-
-tcp_base_mss - INTEGER
-	The initial value of search_low to be used by the packetization layer
-	Path MTU discovery (MTU probing).  If MTU probing is enabled,
-	this is the initial MSS used by the connection.
-
-tcp_mtu_probe_floor - INTEGER
-	If MTU probing is enabled this caps the minimum MSS used for search_low
-	for the connection.
-
-	Default : 48
-
-tcp_min_snd_mss - INTEGER
-	TCP SYN and SYNACK messages usually advertise an ADVMSS option,
-	as described in RFC 1122 and RFC 6691.
-	If this ADVMSS option is smaller than tcp_min_snd_mss,
-	it is silently capped to tcp_min_snd_mss.
-
-	Default : 48 (at least 8 bytes of payload per segment)
-
-tcp_congestion_control - STRING
-	Set the congestion control algorithm to be used for new
-	connections. The algorithm "reno" is always available, but
-	additional choices may be available based on kernel configuration.
-	Default is set as part of kernel configuration.
-	For passive connections, the listener congestion control choice
-	is inherited.
-	[see setsockopt(listenfd, SOL_TCP, TCP_CONGESTION, "name" ...) ]
-
-tcp_dsack - BOOLEAN
-	Allows TCP to send "duplicate" SACKs.
-
-tcp_early_retrans - INTEGER
-	Tail loss probe (TLP) converts RTOs occurring due to tail
-	losses into fast recovery (draft-ietf-tcpm-rack). Note that
-	TLP requires RACK to function properly (see tcp_recovery below)
-	Possible values:
-		0 disables TLP
-		3 or 4 enables TLP
-	Default: 3
-
-tcp_ecn - INTEGER
-	Control use of Explicit Congestion Notification (ECN) by TCP.
-	ECN is used only when both ends of the TCP connection indicate
-	support for it.  This feature is useful in avoiding losses due
-	to congestion by allowing supporting routers to signal
-	congestion before having to drop packets.
-	Possible values are:
-		0 Disable ECN.  Neither initiate nor accept ECN.
-		1 Enable ECN when requested by incoming connections and
-		  also request ECN on outgoing connection attempts.
-		2 Enable ECN when requested by incoming connections
-		  but do not request ECN on outgoing connections.
-	Default: 2
-
-tcp_ecn_fallback - BOOLEAN
-	If the kernel detects that ECN connection misbehaves, enable fall
-	back to non-ECN. Currently, this knob implements the fallback
-	from RFC3168, section 6.1.1.1., but we reserve that in future,
-	additional detection mechanisms could be implemented under this
-	knob. The value	is not used, if tcp_ecn or per route (or congestion
-	control) ECN settings are disabled.
-	Default: 1 (fallback enabled)
-
-tcp_fack - BOOLEAN
-	This is a legacy option, it has no effect anymore.
-
-tcp_fin_timeout - INTEGER
-	The length of time an orphaned (no longer referenced by any
-	application) connection will remain in the FIN_WAIT_2 state
-	before it is aborted at the local end.  While a perfectly
-	valid "receive only" state for an un-orphaned connection, an
-	orphaned connection in FIN_WAIT_2 state could otherwise wait
-	forever for the remote to close its end of the connection.
-	Cf. tcp_max_orphans
-	Default: 60 seconds
-
-tcp_frto - INTEGER
-	Enables Forward RTO-Recovery (F-RTO) defined in RFC5682.
-	F-RTO is an enhanced recovery algorithm for TCP retransmission
-	timeouts.  It is particularly beneficial in networks where the
-	RTT fluctuates (e.g., wireless). F-RTO is sender-side only
-	modification. It does not require any support from the peer.
-
-	By default it's enabled with a non-zero value. 0 disables F-RTO.
-
-tcp_fwmark_accept - BOOLEAN
-	If set, incoming connections to listening sockets that do not have a
-	socket mark will set the mark of the accepting socket to the fwmark of
-	the incoming SYN packet. This will cause all packets on that connection
-	(starting from the first SYNACK) to be sent with that fwmark. The
-	listening socket's mark is unchanged. Listening sockets that already
-	have a fwmark set via setsockopt(SOL_SOCKET, SO_MARK, ...) are
-	unaffected.
-
-	Default: 0
-
-tcp_invalid_ratelimit - INTEGER
-	Limit the maximal rate for sending duplicate acknowledgments
-	in response to incoming TCP packets that are for an existing
-	connection but that are invalid due to any of these reasons:
-
-	  (a) out-of-window sequence number,
-	  (b) out-of-window acknowledgment number, or
-	  (c) PAWS (Protection Against Wrapped Sequence numbers) check failure
-
-	This can help mitigate simple "ack loop" DoS attacks, wherein
-	a buggy or malicious middlebox or man-in-the-middle can
-	rewrite TCP header fields in manner that causes each endpoint
-	to think that the other is sending invalid TCP segments, thus
-	causing each side to send an unterminating stream of duplicate
-	acknowledgments for invalid segments.
-
-	Using 0 disables rate-limiting of dupacks in response to
-	invalid segments; otherwise this value specifies the minimal
-	space between sending such dupacks, in milliseconds.
-
-	Default: 500 (milliseconds).
-
-tcp_keepalive_time - INTEGER
-	How often TCP sends out keepalive messages when keepalive is enabled.
-	Default: 2hours.
-
-tcp_keepalive_probes - INTEGER
-	How many keepalive probes TCP sends out, until it decides that the
-	connection is broken. Default value: 9.
-
-tcp_keepalive_intvl - INTEGER
-	How frequently the probes are send out. Multiplied by
-	tcp_keepalive_probes it is time to kill not responding connection,
-	after probes started. Default value: 75sec i.e. connection
-	will be aborted after ~11 minutes of retries.
-
-tcp_l3mdev_accept - BOOLEAN
-	Enables child sockets to inherit the L3 master device index.
-	Enabling this option allows a "global" listen socket to work
-	across L3 master domains (e.g., VRFs) with connected sockets
-	derived from the listen socket to be bound to the L3 domain in
-	which the packets originated. Only valid when the kernel was
-	compiled with CONFIG_NET_L3_MASTER_DEV.
-        Default: 0 (disabled)
-
-tcp_low_latency - BOOLEAN
-	This is a legacy option, it has no effect anymore.
-
-tcp_max_orphans - INTEGER
-	Maximal number of TCP sockets not attached to any user file handle,
-	held by system.	If this number is exceeded orphaned connections are
-	reset immediately and warning is printed. This limit exists
-	only to prevent simple DoS attacks, you _must_ not rely on this
-	or lower the limit artificially, but rather increase it
-	(probably, after increasing installed memory),
-	if network conditions require more than default value,
-	and tune network services to linger and kill such states
-	more aggressively. Let me to remind again: each orphan eats
-	up to ~64K of unswappable memory.
-
-tcp_max_syn_backlog - INTEGER
-	Maximal number of remembered connection requests (SYN_RECV),
-	which have not received an acknowledgment from connecting client.
-	This is a per-listener limit.
-	The minimal value is 128 for low memory machines, and it will
-	increase in proportion to the memory of machine.
-	If server suffers from overload, try increasing this number.
-	Remember to also check /proc/sys/net/core/somaxconn
-	A SYN_RECV request socket consumes about 304 bytes of memory.
-
-tcp_max_tw_buckets - INTEGER
-	Maximal number of timewait sockets held by system simultaneously.
-	If this number is exceeded time-wait socket is immediately destroyed
-	and warning is printed. This limit exists only to prevent
-	simple DoS attacks, you _must_ not lower the limit artificially,
-	but rather increase it (probably, after increasing installed memory),
-	if network conditions require more than default value.
-
-tcp_mem - vector of 3 INTEGERs: min, pressure, max
-	min: below this number of pages TCP is not bothered about its
-	memory appetite.
-
-	pressure: when amount of memory allocated by TCP exceeds this number
-	of pages, TCP moderates its memory consumption and enters memory
-	pressure mode, which is exited when memory consumption falls
-	under "min".
-
-	max: number of pages allowed for queueing by all TCP sockets.
-
-	Defaults are calculated at boot time from amount of available
-	memory.
-
-tcp_min_rtt_wlen - INTEGER
-	The window length of the windowed min filter to track the minimum RTT.
-	A shorter window lets a flow more quickly pick up new (higher)
-	minimum RTT when it is moved to a longer path (e.g., due to traffic
-	engineering). A longer window makes the filter more resistant to RTT
-	inflations such as transient congestion. The unit is seconds.
-	Possible values: 0 - 86400 (1 day)
-	Default: 300
-
-tcp_moderate_rcvbuf - BOOLEAN
-	If set, TCP performs receive buffer auto-tuning, attempting to
-	automatically size the buffer (no greater than tcp_rmem[2]) to
-	match the size required by the path for full throughput.  Enabled by
-	default.
-
-tcp_mtu_probing - INTEGER
-	Controls TCP Packetization-Layer Path MTU Discovery.  Takes three
-	values:
-	  0 - Disabled
-	  1 - Disabled by default, enabled when an ICMP black hole detected
-	  2 - Always enabled, use initial MSS of tcp_base_mss.
-
-tcp_probe_interval - UNSIGNED INTEGER
-	Controls how often to start TCP Packetization-Layer Path MTU
-	Discovery reprobe. The default is reprobing every 10 minutes as
-	per RFC4821.
-
-tcp_probe_threshold - INTEGER
-	Controls when TCP Packetization-Layer Path MTU Discovery probing
-	will stop in respect to the width of search range in bytes. Default
-	is 8 bytes.
-
-tcp_no_metrics_save - BOOLEAN
-	By default, TCP saves various connection metrics in the route cache
-	when the connection closes, so that connections established in the
-	near future can use these to set initial conditions.  Usually, this
-	increases overall performance, but may sometimes cause performance
-	degradation.  If set, TCP will not cache metrics on closing
-	connections.
-
-tcp_no_ssthresh_metrics_save - BOOLEAN
-	Controls whether TCP saves ssthresh metrics in the route cache.
-	Default is 1, which disables ssthresh metrics.
-
-tcp_orphan_retries - INTEGER
-	This value influences the timeout of a locally closed TCP connection,
-	when RTO retransmissions remain unacknowledged.
-	See tcp_retries2 for more details.
-
-	The default value is 8.
-	If your machine is a loaded WEB server,
-	you should think about lowering this value, such sockets
-	may consume significant resources. Cf. tcp_max_orphans.
-
-tcp_recovery - INTEGER
-	This value is a bitmap to enable various experimental loss recovery
-	features.
-
-	RACK: 0x1 enables the RACK loss detection for fast detection of lost
-	      retransmissions and tail drops. It also subsumes and disables
-	      RFC6675 recovery for SACK connections.
-	RACK: 0x2 makes RACK's reordering window static (min_rtt/4).
-	RACK: 0x4 disables RACK's DUPACK threshold heuristic
-
-	Default: 0x1
-
-tcp_reordering - INTEGER
-	Initial reordering level of packets in a TCP stream.
-	TCP stack can then dynamically adjust flow reordering level
-	between this initial value and tcp_max_reordering
-	Default: 3
-
-tcp_max_reordering - INTEGER
-	Maximal reordering level of packets in a TCP stream.
-	300 is a fairly conservative value, but you might increase it
-	if paths are using per packet load balancing (like bonding rr mode)
-	Default: 300
-
-tcp_retrans_collapse - BOOLEAN
-	Bug-to-bug compatibility with some broken printers.
-	On retransmit try to send bigger packets to work around bugs in
-	certain TCP stacks.
-
-tcp_retries1 - INTEGER
-	This value influences the time, after which TCP decides, that
-	something is wrong due to unacknowledged RTO retransmissions,
-	and reports this suspicion to the network layer.
-	See tcp_retries2 for more details.
-
-	RFC 1122 recommends at least 3 retransmissions, which is the
-	default.
-
-tcp_retries2 - INTEGER
-	This value influences the timeout of an alive TCP connection,
-	when RTO retransmissions remain unacknowledged.
-	Given a value of N, a hypothetical TCP connection following
-	exponential backoff with an initial RTO of TCP_RTO_MIN would
-	retransmit N times before killing the connection at the (N+1)th RTO.
-
-	The default value of 15 yields a hypothetical timeout of 924.6
-	seconds and is a lower bound for the effective timeout.
-	TCP will effectively time out at the first RTO which exceeds the
-	hypothetical timeout.
-
-	RFC 1122 recommends at least 100 seconds for the timeout,
-	which corresponds to a value of at least 8.
-
-tcp_rfc1337 - BOOLEAN
-	If set, the TCP stack behaves conforming to RFC1337. If unset,
-	we are not conforming to RFC, but prevent TCP TIME_WAIT
-	assassination.
-	Default: 0
-
-tcp_rmem - vector of 3 INTEGERs: min, default, max
-	min: Minimal size of receive buffer used by TCP sockets.
-	It is guaranteed to each TCP socket, even under moderate memory
-	pressure.
-	Default: 4K
-
-	default: initial size of receive buffer used by TCP sockets.
-	This value overrides net.core.rmem_default used by other protocols.
-	Default: 87380 bytes. This value results in window of 65535 with
-	default setting of tcp_adv_win_scale and tcp_app_win:0 and a bit
-	less for default tcp_app_win. See below about these variables.
-
-	max: maximal size of receive buffer allowed for automatically
-	selected receiver buffers for TCP socket. This value does not override
-	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
-	automatic tuning of that socket's receive buffer size, in which
-	case this value is ignored.
-	Default: between 87380B and 6MB, depending on RAM size.
-
-tcp_sack - BOOLEAN
-	Enable select acknowledgments (SACKS).
-
-tcp_comp_sack_delay_ns - LONG INTEGER
-	TCP tries to reduce number of SACK sent, using a timer
-	based on 5% of SRTT, capped by this sysctl, in nano seconds.
-	The default is 1ms, based on TSO autosizing period.
-
-	Default : 1,000,000 ns (1 ms)
-
-tcp_comp_sack_nr - INTEGER
-	Max number of SACK that can be compressed.
-	Using 0 disables SACK compression.
-
-	Default : 44
-
-tcp_slow_start_after_idle - BOOLEAN
-	If set, provide RFC2861 behavior and time out the congestion
-	window after an idle period.  An idle period is defined at
-	the current RTO.  If unset, the congestion window will not
-	be timed out after an idle period.
-	Default: 1
-
-tcp_stdurg - BOOLEAN
-	Use the Host requirements interpretation of the TCP urgent pointer field.
-	Most hosts use the older BSD interpretation, so if you turn this on
-	Linux might not communicate correctly with them.
-	Default: FALSE
-
-tcp_synack_retries - INTEGER
-	Number of times SYNACKs for a passive TCP connection attempt will
-	be retransmitted. Should not be higher than 255. Default value
-	is 5, which corresponds to 31seconds till the last retransmission
-	with the current initial RTO of 1second. With this the final timeout
-	for a passive TCP connection will happen after 63seconds.
-
-tcp_syncookies - INTEGER
-	Only valid when the kernel was compiled with CONFIG_SYN_COOKIES
-	Send out syncookies when the syn backlog queue of a socket
-	overflows. This is to prevent against the common 'SYN flood attack'
-	Default: 1
-
-	Note, that syncookies is fallback facility.
-	It MUST NOT be used to help highly loaded servers to stand
-	against legal connection rate. If you see SYN flood warnings
-	in your logs, but investigation	shows that they occur
-	because of overload with legal connections, you should tune
-	another parameters until this warning disappear.
-	See: tcp_max_syn_backlog, tcp_synack_retries, tcp_abort_on_overflow.
-
-	syncookies seriously violate TCP protocol, do not allow
-	to use TCP extensions, can result in serious degradation
-	of some services (f.e. SMTP relaying), visible not by you,
-	but your clients and relays, contacting you. While you see
-	SYN flood warnings in logs not being really flooded, your server
-	is seriously misconfigured.
-
-	If you want to test which effects syncookies have to your
-	network connections you can set this knob to 2 to enable
-	unconditionally generation of syncookies.
-
-tcp_fastopen - INTEGER
-	Enable TCP Fast Open (RFC7413) to send and accept data in the opening
-	SYN packet.
-
-	The client support is enabled by flag 0x1 (on by default). The client
-	then must use sendmsg() or sendto() with the MSG_FASTOPEN flag,
-	rather than connect() to send data in SYN.
-
-	The server support is enabled by flag 0x2 (off by default). Then
-	either enable for all listeners with another flag (0x400) or
-	enable individual listeners via TCP_FASTOPEN socket option with
-	the option value being the length of the syn-data backlog.
-
-	The values (bitmap) are
-	  0x1: (client) enables sending data in the opening SYN on the client.
-	  0x2: (server) enables the server support, i.e., allowing data in
-			a SYN packet to be accepted and passed to the
-			application before 3-way handshake finishes.
-	  0x4: (client) send data in the opening SYN regardless of cookie
-			availability and without a cookie option.
-	0x200: (server) accept data-in-SYN w/o any cookie option present.
-	0x400: (server) enable all listeners to support Fast Open by
-			default without explicit TCP_FASTOPEN socket option.
-
-	Default: 0x1
-
-	Note that that additional client or server features are only
-	effective if the basic support (0x1 and 0x2) are enabled respectively.
-
-tcp_fastopen_blackhole_timeout_sec - INTEGER
-	Initial time period in second to disable Fastopen on active TCP sockets
-	when a TFO firewall blackhole issue happens.
-	This time period will grow exponentially when more blackhole issues
-	get detected right after Fastopen is re-enabled and will reset to
-	initial value when the blackhole issue goes away.
-	0 to disable the blackhole detection.
-	By default, it is set to 1hr.
-
-tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
-	The list consists of a primary key and an optional backup key. The
-	primary key is used for both creating and validating cookies, while the
-	optional backup key is only used for validating cookies. The purpose of
-	the backup key is to maximize TFO validation when keys are rotated.
-
-	A randomly chosen primary key may be configured by the kernel if
-	the tcp_fastopen sysctl is set to 0x400 (see above), or if the
-	TCP_FASTOPEN setsockopt() optname is set and a key has not been
-	previously configured via sysctl. If keys are configured via
-	setsockopt() by using the TCP_FASTOPEN_KEY optname, then those
-	per-socket keys will be used instead of any keys that are specified via
-	sysctl.
-
-	A key is specified as 4 8-digit hexadecimal integers which are separated
-	by a '-' as: xxxxxxxx-xxxxxxxx-xxxxxxxx-xxxxxxxx. Leading zeros may be
-	omitted. A primary and a backup key may be specified by separating them
-	by a comma. If only one key is specified, it becomes the primary key and
-	any previously configured backup keys are removed.
-
-tcp_syn_retries - INTEGER
-	Number of times initial SYNs for an active TCP connection attempt
-	will be retransmitted. Should not be higher than 127. Default value
-	is 6, which corresponds to 63seconds till the last retransmission
-	with the current initial RTO of 1second. With this the final timeout
-	for an active TCP connection attempt will happen after 127seconds.
-
-tcp_timestamps - INTEGER
-Enable timestamps as defined in RFC1323.
-	0: Disabled.
-	1: Enable timestamps as defined in RFC1323 and use random offset for
-	each connection rather than only using the current time.
-	2: Like 1, but without random offsets.
-	Default: 1
-
-tcp_min_tso_segs - INTEGER
-	Minimal number of segments per TSO frame.
-	Since linux-3.12, TCP does an automatic sizing of TSO frames,
-	depending on flow rate, instead of filling 64Kbytes packets.
-	For specific usages, it's possible to force TCP to build big
-	TSO frames. Note that TCP stack might split too big TSO packets
-	if available window is too small.
-	Default: 2
-
-tcp_pacing_ss_ratio - INTEGER
-	sk->sk_pacing_rate is set by TCP stack using a ratio applied
-	to current rate. (current_rate = cwnd * mss / srtt)
-	If TCP is in slow start, tcp_pacing_ss_ratio is applied
-	to let TCP probe for bigger speeds, assuming cwnd can be
-	doubled every other RTT.
-	Default: 200
-
-tcp_pacing_ca_ratio - INTEGER
-	sk->sk_pacing_rate is set by TCP stack using a ratio applied
-	to current rate. (current_rate = cwnd * mss / srtt)
-	If TCP is in congestion avoidance phase, tcp_pacing_ca_ratio
-	is applied to conservatively probe for bigger throughput.
-	Default: 120
-
-tcp_tso_win_divisor - INTEGER
-	This allows control over what percentage of the congestion window
-	can be consumed by a single TSO frame.
-	The setting of this parameter is a choice between burstiness and
-	building larger TSO frames.
-	Default: 3
-
-tcp_tw_reuse - INTEGER
-	Enable reuse of TIME-WAIT sockets for new connections when it is
-	safe from protocol viewpoint.
-	0 - disable
-	1 - global enable
-	2 - enable for loopback traffic only
-	It should not be changed without advice/request of technical
-	experts.
-	Default: 2
-
-tcp_window_scaling - BOOLEAN
-	Enable window scaling as defined in RFC1323.
-
-tcp_wmem - vector of 3 INTEGERs: min, default, max
-	min: Amount of memory reserved for send buffers for TCP sockets.
-	Each TCP socket has rights to use it due to fact of its birth.
-	Default: 4K
-
-	default: initial size of send buffer used by TCP sockets.  This
-	value overrides net.core.wmem_default used by other protocols.
-	It is usually lower than net.core.wmem_default.
-	Default: 16K
-
-	max: Maximal amount of memory allowed for automatically tuned
-	send buffers for TCP sockets. This value does not override
-	net.core.wmem_max.  Calling setsockopt() with SO_SNDBUF disables
-	automatic tuning of that socket's send buffer size, in which case
-	this value is ignored.
-	Default: between 64K and 4MB, depending on RAM size.
-
-tcp_notsent_lowat - UNSIGNED INTEGER
-	A TCP socket can control the amount of unsent bytes in its write queue,
-	thanks to TCP_NOTSENT_LOWAT socket option. poll()/select()/epoll()
-	reports POLLOUT events if the amount of unsent bytes is below a per
-	socket value, and if the write queue is not full. sendmsg() will
-	also not add new buffers if the limit is hit.
-
-	This global variable controls the amount of unsent data for
-	sockets not using TCP_NOTSENT_LOWAT. For these sockets, a change
-	to the global variable has immediate effect.
-
-	Default: UINT_MAX (0xFFFFFFFF)
-
-tcp_workaround_signed_windows - BOOLEAN
-	If set, assume no receipt of a window scaling option means the
-	remote TCP is broken and treats the window as a signed quantity.
-	If unset, assume the remote TCP is not broken even if we do
-	not receive a window scaling option from them.
-	Default: 0
-
-tcp_thin_linear_timeouts - BOOLEAN
-	Enable dynamic triggering of linear timeouts for thin streams.
-	If set, a check is performed upon retransmission by timeout to
-	determine if the stream is thin (less than 4 packets in flight).
-	As long as the stream is found to be thin, up to 6 linear
-	timeouts may be performed before exponential backoff mode is
-	initiated. This improves retransmission latency for
-	non-aggressive thin streams, often found to be time-dependent.
-	For more information on thin streams, see
-	Documentation/networking/tcp-thin.txt
-	Default: 0
-
-tcp_limit_output_bytes - INTEGER
-	Controls TCP Small Queue limit per tcp socket.
-	TCP bulk sender tends to increase packets in flight until it
-	gets losses notifications. With SNDBUF autotuning, this can
-	result in a large amount of packets queued on the local machine
-	(e.g.: qdiscs, CPU backlog, or device) hurting latency of other
-	flows, for typical pfifo_fast qdiscs.  tcp_limit_output_bytes
-	limits the number of bytes on qdisc or device to reduce artificial
-	RTT/cwnd and reduce bufferbloat.
-	Default: 1048576 (16 * 65536)
-
-tcp_challenge_ack_limit - INTEGER
-	Limits number of Challenge ACK sent per second, as recommended
-	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
-	Default: 1000
-
-tcp_rx_skb_cache - BOOLEAN
-	Controls a per TCP socket cache of one skb, that might help
-	performance of some workloads. This might be dangerous
-	on systems with a lot of TCP sockets, since it increases
-	memory usage.
-
-	Default: 0 (disabled)
-
-UDP variables:
-
-udp_l3mdev_accept - BOOLEAN
-	Enabling this option allows a "global" bound socket to work
-	across L3 master domains (e.g., VRFs) with packets capable of
-	being received regardless of the L3 domain in which they
-	originated. Only valid when the kernel was compiled with
-	CONFIG_NET_L3_MASTER_DEV.
-        Default: 0 (disabled)
-
-udp_mem - vector of 3 INTEGERs: min, pressure, max
-	Number of pages allowed for queueing by all UDP sockets.
-
-	min: Below this number of pages UDP is not bothered about its
-	memory appetite. When amount of memory allocated by UDP exceeds
-	this number, UDP starts to moderate memory usage.
-
-	pressure: This value was introduced to follow format of tcp_mem.
-
-	max: Number of pages allowed for queueing by all UDP sockets.
-
-	Default is calculated at boot time from amount of available memory.
-
-udp_rmem_min - INTEGER
-	Minimal size of receive buffer used by UDP sockets in moderation.
-	Each UDP socket is able to use the size for receiving data, even if
-	total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
-	Default: 4K
-
-udp_wmem_min - INTEGER
-	Minimal size of send buffer used by UDP sockets in moderation.
-	Each UDP socket is able to use the size for sending data, even if
-	total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
-	Default: 4K
-
-RAW variables:
-
-raw_l3mdev_accept - BOOLEAN
-	Enabling this option allows a "global" bound socket to work
-	across L3 master domains (e.g., VRFs) with packets capable of
-	being received regardless of the L3 domain in which they
-	originated. Only valid when the kernel was compiled with
-	CONFIG_NET_L3_MASTER_DEV.
-	Default: 1 (enabled)
-
-CIPSOv4 Variables:
-
-cipso_cache_enable - BOOLEAN
-	If set, enable additions to and lookups from the CIPSO label mapping
-	cache.  If unset, additions are ignored and lookups always result in a
-	miss.  However, regardless of the setting the cache is still
-	invalidated when required when means you can safely toggle this on and
-	off and the cache will always be "safe".
-	Default: 1
-
-cipso_cache_bucket_size - INTEGER
-	The CIPSO label cache consists of a fixed size hash table with each
-	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
-	more CIPSO label mappings that can be cached.  When the number of
-	entries in a given hash bucket reaches this limit adding new entries
-	causes the oldest entry in the bucket to be removed to make room.
-	Default: 10
-
-cipso_rbm_optfmt - BOOLEAN
-	Enable the "Optimized Tag 1 Format" as defined in section 3.4.2.6 of
-	the CIPSO draft specification (see Documentation/netlabel for details).
-	This means that when set the CIPSO tag will be padded with empty
-	categories in order to make the packet data 32-bit aligned.
-	Default: 0
-
-cipso_rbm_structvalid - BOOLEAN
-	If set, do a very strict check of the CIPSO option when
-	ip_options_compile() is called.  If unset, relax the checks done during
-	ip_options_compile().  Either way is "safe" as errors are caught else
-	where in the CIPSO processing code but setting this to 0 (False) should
-	result in less work (i.e. it should be faster) but could cause problems
-	with other implementations that require strict checking.
-	Default: 0
-
-IP Variables:
-
-ip_local_port_range - 2 INTEGERS
-	Defines the local port range that is used by TCP and UDP to
-	choose the local port. The first number is the first, the
-	second the last local port number.
-	If possible, it is better these numbers have different parity
-	(one even and one odd value).
-	Must be greater than or equal to ip_unprivileged_port_start.
-	The default values are 32768 and 60999 respectively.
-
-ip_local_reserved_ports - list of comma separated ranges
-	Specify the ports which are reserved for known third-party
-	applications. These ports will not be used by automatic port
-	assignments (e.g. when calling connect() or bind() with port
-	number 0). Explicit port allocation behavior is unchanged.
-
-	The format used for both input and output is a comma separated
-	list of ranges (e.g. "1,2-4,10-10" for ports 1, 2, 3, 4 and
-	10). Writing to the file will clear all previously reserved
-	ports and update the current list with the one given in the
-	input.
-
-	Note that ip_local_port_range and ip_local_reserved_ports
-	settings are independent and both are considered by the kernel
-	when determining which ports are available for automatic port
-	assignments.
-
-	You can reserve ports which are not in the current
-	ip_local_port_range, e.g.:
-
-	$ cat /proc/sys/net/ipv4/ip_local_port_range
-	32000	60999
-	$ cat /proc/sys/net/ipv4/ip_local_reserved_ports
-	8080,9148
-
-	although this is redundant. However such a setting is useful
-	if later the port range is changed to a value that will
-	include the reserved ports.
-
-	Default: Empty
-
-ip_unprivileged_port_start - INTEGER
-	This is a per-namespace sysctl.  It defines the first
-	unprivileged port in the network namespace.  Privileged ports
-	require root or CAP_NET_BIND_SERVICE in order to bind to them.
-	To disable all privileged ports, set this to 0.  They must not
-	overlap with the ip_local_port_range.
-
-	Default: 1024
-
-ip_nonlocal_bind - BOOLEAN
-	If set, allows processes to bind() to non-local IP addresses,
-	which can be quite useful - but may break some applications.
-	Default: 0
-
-ip_autobind_reuse - BOOLEAN
-	By default, bind() does not select the ports automatically even if
-	the new socket and all sockets bound to the port have SO_REUSEADDR.
-	ip_autobind_reuse allows bind() to reuse the port and this is useful
-	when you use bind()+connect(), but may break some applications.
-	The preferred solution is to use IP_BIND_ADDRESS_NO_PORT and this
-	option should only be set by experts.
-	Default: 0
-
-ip_dynaddr - BOOLEAN
-	If set non-zero, enables support for dynamic addresses.
-	If set to a non-zero value larger than 1, a kernel log
-	message will be printed when dynamic address rewriting
-	occurs.
-	Default: 0
-
-ip_early_demux - BOOLEAN
-	Optimize input packet processing down to one demux for
-	certain kinds of local sockets.  Currently we only do this
-	for established TCP and connected UDP sockets.
-
-	It may add an additional cost for pure routing workloads that
-	reduces overall throughput, in such case you should disable it.
-	Default: 1
-
-ping_group_range - 2 INTEGERS
-	Restrict ICMP_PROTO datagram sockets to users in the group range.
-	The default is "1 0", meaning, that nobody (not even root) may
-	create ping sockets.  Setting it to "100 100" would grant permissions
-	to the single group. "0 4294967295" would enable it for the world, "100
-	4294967295" would enable it for the users, but not daemons.
-
-tcp_early_demux - BOOLEAN
-	Enable early demux for established TCP sockets.
-	Default: 1
-
-udp_early_demux - BOOLEAN
-	Enable early demux for connected UDP sockets. Disable this if
-	your system could experience more unconnected load.
-	Default: 1
-
-icmp_echo_ignore_all - BOOLEAN
-	If set non-zero, then the kernel will ignore all ICMP ECHO
-	requests sent to it.
-	Default: 0
-
-icmp_echo_ignore_broadcasts - BOOLEAN
-	If set non-zero, then the kernel will ignore all ICMP ECHO and
-	TIMESTAMP requests sent to it via broadcast/multicast.
-	Default: 1
-
-icmp_ratelimit - INTEGER
-	Limit the maximal rates for sending ICMP packets whose type matches
-	icmp_ratemask (see below) to specific targets.
-	0 to disable any limiting,
-	otherwise the minimal space between responses in milliseconds.
-	Note that another sysctl, icmp_msgs_per_sec limits the number
-	of ICMP packets	sent on all targets.
-	Default: 1000
-
-icmp_msgs_per_sec - INTEGER
-	Limit maximal number of ICMP packets sent per second from this host.
-	Only messages whose type matches icmp_ratemask (see below) are
-	controlled by this limit.
-	Default: 1000
-
-icmp_msgs_burst - INTEGER
-	icmp_msgs_per_sec controls number of ICMP packets sent per second,
-	while icmp_msgs_burst controls the burst size of these packets.
-	Default: 50
-
-icmp_ratemask - INTEGER
-	Mask made of ICMP types for which rates are being limited.
-	Significant bits: IHGFEDCBA9876543210
-	Default mask:     0000001100000011000 (6168)
-
-	Bit definitions (see include/linux/icmp.h):
-		0 Echo Reply
-		3 Destination Unreachable *
-		4 Source Quench *
-		5 Redirect
-		8 Echo Request
-		B Time Exceeded *
-		C Parameter Problem *
-		D Timestamp Request
-		E Timestamp Reply
-		F Info Request
-		G Info Reply
-		H Address Mask Request
-		I Address Mask Reply
-
-	* These are rate limited by default (see default mask above)
-
-icmp_ignore_bogus_error_responses - BOOLEAN
-	Some routers violate RFC1122 by sending bogus responses to broadcast
-	frames.  Such violations are normally logged via a kernel warning.
-	If this is set to TRUE, the kernel will not give such warnings, which
-	will avoid log file clutter.
-	Default: 1
-
-icmp_errors_use_inbound_ifaddr - BOOLEAN
-
-	If zero, icmp error messages are sent with the primary address of
-	the exiting interface.
-
-	If non-zero, the message will be sent with the primary address of
-	the interface that received the packet that caused the icmp error.
-	This is the behaviour network many administrators will expect from
-	a router. And it can make debugging complicated network layouts
-	much easier.
-
-	Note that if no primary address exists for the interface selected,
-	then the primary address of the first non-loopback interface that
-	has one will be used regardless of this setting.
-
-	Default: 0
-
-igmp_max_memberships - INTEGER
-	Change the maximum number of multicast groups we can subscribe to.
-	Default: 20
-
-	Theoretical maximum value is bounded by having to send a membership
-	report in a single datagram (i.e. the report can't span multiple
-	datagrams, or risk confusing the switch and leaving groups you don't
-	intend to).
-
-	The number of supported groups 'M' is bounded by the number of group
-	report entries you can fit into a single datagram of 65535 bytes.
-
-	M = 65536-sizeof (ip header)/(sizeof(Group record))
-
-	Group records are variable length, with a minimum of 12 bytes.
-	So net.ipv4.igmp_max_memberships should not be set higher than:
-
-	(65536-24) / 12 = 5459
-
-	The value 5459 assumes no IP header options, so in practice
-	this number may be lower.
-
-igmp_max_msf - INTEGER
-	Maximum number of addresses allowed in the source filter list for a
-	multicast group.
-	Default: 10
-
-igmp_qrv - INTEGER
-	Controls the IGMP query robustness variable (see RFC2236 8.1).
-	Default: 2 (as specified by RFC2236 8.1)
-	Minimum: 1 (as specified by RFC6636 4.5)
-
-force_igmp_version - INTEGER
-	0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
-	    allowed. Will back to IGMPv3 mode again if all IGMPv1/v2 Querier
-	    Present timer expires.
-	1 - Enforce to use IGMP version 1. Will also reply IGMPv1 report if
-	    receive IGMPv2/v3 query.
-	2 - Enforce to use IGMP version 2. Will fallback to IGMPv1 if receive
-	    IGMPv1 query message. Will reply report if receive IGMPv3 query.
-	3 - Enforce to use IGMP version 3. The same react with default 0.
-
-	Note: this is not the same with force_mld_version because IGMPv3 RFC3376
-	Security Considerations does not have clear description that we could
-	ignore other version messages completely as MLDv2 RFC3810. So make
-	this value as default 0 is recommended.
-
-conf/interface/*  changes special settings per interface (where
-"interface" is the name of your network interface)
-
-conf/all/*	  is special, changes the settings for all interfaces
-
-log_martians - BOOLEAN
-	Log packets with impossible addresses to kernel log.
-	log_martians for the interface will be enabled if at least one of
-	conf/{all,interface}/log_martians is set to TRUE,
-	it will be disabled otherwise
-
-accept_redirects - BOOLEAN
-	Accept ICMP redirect messages.
-	accept_redirects for the interface will be enabled if:
-	- both conf/{all,interface}/accept_redirects are TRUE in the case
-	  forwarding for the interface is enabled
-	or
-	- at least one of conf/{all,interface}/accept_redirects is TRUE in the
-	  case forwarding for the interface is disabled
-	accept_redirects for the interface will be disabled otherwise
-	default TRUE (host)
-		FALSE (router)
-
-forwarding - BOOLEAN
-	Enable IP forwarding on this interface.  This controls whether packets
-	received _on_ this interface can be forwarded.
-
-mc_forwarding - BOOLEAN
-	Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE
-	and a multicast routing daemon is required.
-	conf/all/mc_forwarding must also be set to TRUE to enable multicast
-	routing	for the interface
-
-medium_id - INTEGER
-	Integer value used to differentiate the devices by the medium they
-	are attached to. Two devices can have different id values when
-	the broadcast packets are received only on one of them.
-	The default value 0 means that the device is the only interface
-	to its medium, value of -1 means that medium is not known.
-
-	Currently, it is used to change the proxy_arp behavior:
-	the proxy_arp feature is enabled for packets forwarded between
-	two devices attached to different media.
-
-proxy_arp - BOOLEAN
-	Do proxy arp.
-	proxy_arp for the interface will be enabled if at least one of
-	conf/{all,interface}/proxy_arp is set to TRUE,
-	it will be disabled otherwise
-
-proxy_arp_pvlan - BOOLEAN
-	Private VLAN proxy arp.
-	Basically allow proxy arp replies back to the same interface
-	(from which the ARP request/solicitation was received).
-
-	This is done to support (ethernet) switch features, like RFC
-	3069, where the individual ports are NOT allowed to
-	communicate with each other, but they are allowed to talk to
-	the upstream router.  As described in RFC 3069, it is possible
-	to allow these hosts to communicate through the upstream
-	router by proxy_arp'ing. Don't need to be used together with
-	proxy_arp.
-
-	This technology is known by different names:
-	  In RFC 3069 it is called VLAN Aggregation.
-	  Cisco and Allied Telesyn call it Private VLAN.
-	  Hewlett-Packard call it Source-Port filtering or port-isolation.
-	  Ericsson call it MAC-Forced Forwarding (RFC Draft).
-
-shared_media - BOOLEAN
-	Send(router) or accept(host) RFC1620 shared media redirects.
-	Overrides secure_redirects.
-	shared_media for the interface will be enabled if at least one of
-	conf/{all,interface}/shared_media is set to TRUE,
-	it will be disabled otherwise
-	default TRUE
-
-secure_redirects - BOOLEAN
-	Accept ICMP redirect messages only to gateways listed in the
-	interface's current gateway list. Even if disabled, RFC1122 redirect
-	rules still apply.
-	Overridden by shared_media.
-	secure_redirects for the interface will be enabled if at least one of
-	conf/{all,interface}/secure_redirects is set to TRUE,
-	it will be disabled otherwise
-	default TRUE
-
-send_redirects - BOOLEAN
-	Send redirects, if router.
-	send_redirects for the interface will be enabled if at least one of
-	conf/{all,interface}/send_redirects is set to TRUE,
-	it will be disabled otherwise
-	Default: TRUE
-
-bootp_relay - BOOLEAN
-	Accept packets with source address 0.b.c.d destined
-	not to this host as local ones. It is supposed, that
-	BOOTP relay daemon will catch and forward such packets.
-	conf/all/bootp_relay must also be set to TRUE to enable BOOTP relay
-	for the interface
-	default FALSE
-	Not Implemented Yet.
-
-accept_source_route - BOOLEAN
-	Accept packets with SRR option.
-	conf/all/accept_source_route must also be set to TRUE to accept packets
-	with SRR option on the interface
-	default TRUE (router)
-		FALSE (host)
-
-accept_local - BOOLEAN
-	Accept packets with local source addresses. In combination with
-	suitable routing, this can be used to direct packets between two
-	local interfaces over the wire and have them accepted properly.
-	default FALSE
-
-route_localnet - BOOLEAN
-	Do not consider loopback addresses as martian source or destination
-	while routing. This enables the use of 127/8 for local routing purposes.
-	default FALSE
-
-rp_filter - INTEGER
-	0 - No source validation.
-	1 - Strict mode as defined in RFC3704 Strict Reverse Path
-	    Each incoming packet is tested against the FIB and if the interface
-	    is not the best reverse path the packet check will fail.
-	    By default failed packets are discarded.
-	2 - Loose mode as defined in RFC3704 Loose Reverse Path
-	    Each incoming packet's source address is also tested against the FIB
-	    and if the source address is not reachable via any interface
-	    the packet check will fail.
-
-	Current recommended practice in RFC3704 is to enable strict mode
-	to prevent IP spoofing from DDos attacks. If using asymmetric routing
-	or other complicated routing, then loose mode is recommended.
-
-	The max value from conf/{all,interface}/rp_filter is used
-	when doing source validation on the {interface}.
-
-	Default value is 0. Note that some distributions enable it
-	in startup scripts.
-
-arp_filter - BOOLEAN
-	1 - Allows you to have multiple network interfaces on the same
-	subnet, and have the ARPs for each interface be answered
-	based on whether or not the kernel would route a packet from
-	the ARP'd IP out that interface (therefore you must use source
-	based routing for this to work). In other words it allows control
-	of which cards (usually 1) will respond to an arp request.
-
-	0 - (default) The kernel can respond to arp requests with addresses
-	from other interfaces. This may seem wrong but it usually makes
-	sense, because it increases the chance of successful communication.
-	IP addresses are owned by the complete host on Linux, not by
-	particular interfaces. Only for more complex setups like load-
-	balancing, does this behaviour cause problems.
-
-	arp_filter for the interface will be enabled if at least one of
-	conf/{all,interface}/arp_filter is set to TRUE,
-	it will be disabled otherwise
-
-arp_announce - INTEGER
-	Define different restriction levels for announcing the local
-	source IP address from IP packets in ARP requests sent on
-	interface:
-	0 - (default) Use any local address, configured on any interface
-	1 - Try to avoid local addresses that are not in the target's
-	subnet for this interface. This mode is useful when target
-	hosts reachable via this interface require the source IP
-	address in ARP requests to be part of their logical network
-	configured on the receiving interface. When we generate the
-	request we will check all our subnets that include the
-	target IP and will preserve the source address if it is from
-	such subnet. If there is no such subnet we select source
-	address according to the rules for level 2.
-	2 - Always use the best local address for this target.
-	In this mode we ignore the source address in the IP packet
-	and try to select local address that we prefer for talks with
-	the target host. Such local address is selected by looking
-	for primary IP addresses on all our subnets on the outgoing
-	interface that include the target IP address. If no suitable
-	local address is found we select the first local address
-	we have on the outgoing interface or on all other interfaces,
-	with the hope we will receive reply for our request and
-	even sometimes no matter the source IP address we announce.
-
-	The max value from conf/{all,interface}/arp_announce is used.
-
-	Increasing the restriction level gives more chance for
-	receiving answer from the resolved target while decreasing
-	the level announces more valid sender's information.
-
-arp_ignore - INTEGER
-	Define different modes for sending replies in response to
-	received ARP requests that resolve local target IP addresses:
-	0 - (default): reply for any local target IP address, configured
-	on any interface
-	1 - reply only if the target IP address is local address
-	configured on the incoming interface
-	2 - reply only if the target IP address is local address
-	configured on the incoming interface and both with the
-	sender's IP address are part from same subnet on this interface
-	3 - do not reply for local addresses configured with scope host,
-	only resolutions for global and link addresses are replied
-	4-7 - reserved
-	8 - do not reply for all local addresses
-
-	The max value from conf/{all,interface}/arp_ignore is used
-	when ARP request is received on the {interface}
-
-arp_notify - BOOLEAN
-	Define mode for notification of address and device changes.
-	0 - (default): do nothing
-	1 - Generate gratuitous arp requests when device is brought up
-	    or hardware address changes.
-
-arp_accept - BOOLEAN
-	Define behavior for gratuitous ARP frames who's IP is not
-	already present in the ARP table:
-	0 - don't create new entries in the ARP table
-	1 - create new entries in the ARP table
-
-	Both replies and requests type gratuitous arp will trigger the
-	ARP table to be updated, if this setting is on.
-
-	If the ARP table already contains the IP address of the
-	gratuitous arp frame, the arp table will be updated regardless
-	if this setting is on or off.
-
-mcast_solicit - INTEGER
-	The maximum number of multicast probes in INCOMPLETE state,
-	when the associated hardware address is unknown.  Defaults
-	to 3.
-
-ucast_solicit - INTEGER
-	The maximum number of unicast probes in PROBE state, when
-	the hardware address is being reconfirmed.  Defaults to 3.
-
-app_solicit - INTEGER
-	The maximum number of probes to send to the user space ARP daemon
-	via netlink before dropping back to multicast probes (see
-	mcast_resolicit).  Defaults to 0.
-
-mcast_resolicit - INTEGER
-	The maximum number of multicast probes after unicast and
-	app probes in PROBE state.  Defaults to 0.
-
-disable_policy - BOOLEAN
-	Disable IPSEC policy (SPD) for this interface
-
-disable_xfrm - BOOLEAN
-	Disable IPSEC encryption on this interface, whatever the policy
-
-igmpv2_unsolicited_report_interval - INTEGER
-	The interval in milliseconds in which the next unsolicited
-	IGMPv1 or IGMPv2 report retransmit will take place.
-	Default: 10000 (10 seconds)
-
-igmpv3_unsolicited_report_interval - INTEGER
-	The interval in milliseconds in which the next unsolicited
-	IGMPv3 report retransmit will take place.
-	Default: 1000 (1 seconds)
-
-promote_secondaries - BOOLEAN
-	When a primary IP address is removed from this interface
-	promote a corresponding secondary IP address instead of
-	removing all the corresponding secondary IP addresses.
-
-drop_unicast_in_l2_multicast - BOOLEAN
-	Drop any unicast IP packets that are received in link-layer
-	multicast (or broadcast) frames.
-	This behavior (for multicast) is actually a SHOULD in RFC
-	1122, but is disabled by default for compatibility reasons.
-	Default: off (0)
-
-drop_gratuitous_arp - BOOLEAN
-	Drop all gratuitous ARP frames, for example if there's a known
-	good ARP proxy on the network and such frames need not be used
-	(or in the case of 802.11, must not be used to prevent attacks.)
-	Default: off (0)
-
-
-tag - INTEGER
-	Allows you to write a number, which can be used as required.
-	Default value is 0.
-
-xfrm4_gc_thresh - INTEGER
-	(Obsolete since linux-4.14)
-	The threshold at which we will start garbage collecting for IPv4
-	destination cache entries.  At twice this value the system will
-	refuse new allocations.
-
-igmp_link_local_mcast_reports - BOOLEAN
-	Enable IGMP reports for link local multicast groups in the
-	224.0.0.X range.
-	Default TRUE
-
-Alexey Kuznetsov.
-kuznet@ms2.inr.ac.ru
-
-Updated by:
-Andi Kleen
-ak@muc.de
-Nicolas Delon
-delon.nicolas@wanadoo.fr
-
-
-
-
-/proc/sys/net/ipv6/* Variables:
-
-IPv6 has no global variables such as tcp_*.  tcp_* settings under ipv4/ also
-apply to IPv6 [XXX?].
-
-bindv6only - BOOLEAN
-	Default value for IPV6_V6ONLY socket option,
-	which restricts use of the IPv6 socket to IPv6 communication
-	only.
-		TRUE: disable IPv4-mapped address feature
-		FALSE: enable IPv4-mapped address feature
-
-	Default: FALSE (as specified in RFC3493)
-
-flowlabel_consistency - BOOLEAN
-	Protect the consistency (and unicity) of flow label.
-	You have to disable it to use IPV6_FL_F_REFLECT flag on the
-	flow label manager.
-	TRUE: enabled
-	FALSE: disabled
-	Default: TRUE
-
-auto_flowlabels - INTEGER
-	Automatically generate flow labels based on a flow hash of the
-	packet. This allows intermediate devices, such as routers, to
-	identify packet flows for mechanisms like Equal Cost Multipath
-	Routing (see RFC 6438).
-	0: automatic flow labels are completely disabled
-	1: automatic flow labels are enabled by default, they can be
-	   disabled on a per socket basis using the IPV6_AUTOFLOWLABEL
-	   socket option
-	2: automatic flow labels are allowed, they may be enabled on a
-	   per socket basis using the IPV6_AUTOFLOWLABEL socket option
-	3: automatic flow labels are enabled and enforced, they cannot
-	   be disabled by the socket option
-	Default: 1
-
-flowlabel_state_ranges - BOOLEAN
-	Split the flow label number space into two ranges. 0-0x7FFFF is
-	reserved for the IPv6 flow manager facility, 0x80000-0xFFFFF
-	is reserved for stateless flow labels as described in RFC6437.
-	TRUE: enabled
-	FALSE: disabled
-	Default: true
-
-flowlabel_reflect - INTEGER
-	Control flow label reflection. Needed for Path MTU
-	Discovery to work with Equal Cost Multipath Routing in anycast
-	environments. See RFC 7690 and:
-	https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01
-
-	This is a bitmask.
-	1: enabled for established flows
-
-	Note that this prevents automatic flowlabel changes, as done
-	in "tcp: change IPv6 flow-label upon receiving spurious retransmission"
-	and "tcp: Change txhash on every SYN and RTO retransmit"
-
-	2: enabled for TCP RESET packets (no active listener)
-	If set, a RST packet sent in response to a SYN packet on a closed
-	port will reflect the incoming flow label.
-
-	4: enabled for ICMPv6 echo reply messages.
-
-	Default: 0
-
-fib_multipath_hash_policy - INTEGER
-	Controls which hash policy to use for multipath routes.
-	Default: 0 (Layer 3)
-	Possible values:
-	0 - Layer 3 (source and destination addresses plus flow label)
-	1 - Layer 4 (standard 5-tuple)
-	2 - Layer 3 or inner Layer 3 if present
-
-anycast_src_echo_reply - BOOLEAN
-	Controls the use of anycast addresses as source addresses for ICMPv6
-	echo reply
-	TRUE:  enabled
-	FALSE: disabled
-	Default: FALSE
-
-idgen_delay - INTEGER
-	Controls the delay in seconds after which time to retry
-	privacy stable address generation if a DAD conflict is
-	detected.
-	Default: 1 (as specified in RFC7217)
-
-idgen_retries - INTEGER
-	Controls the number of retries to generate a stable privacy
-	address if a DAD conflict is detected.
-	Default: 3 (as specified in RFC7217)
-
-mld_qrv - INTEGER
-	Controls the MLD query robustness variable (see RFC3810 9.1).
-	Default: 2 (as specified by RFC3810 9.1)
-	Minimum: 1 (as specified by RFC6636 4.5)
-
-max_dst_opts_number - INTEGER
-	Maximum number of non-padding TLVs allowed in a Destination
-	options extension header. If this value is less than zero
-	then unknown options are disallowed and the number of known
-	TLVs allowed is the absolute value of this number.
-	Default: 8
-
-max_hbh_opts_number - INTEGER
-	Maximum number of non-padding TLVs allowed in a Hop-by-Hop
-	options extension header. If this value is less than zero
-	then unknown options are disallowed and the number of known
-	TLVs allowed is the absolute value of this number.
-	Default: 8
-
-max_dst_opts_length - INTEGER
-	Maximum length allowed for a Destination options extension
-	header.
-	Default: INT_MAX (unlimited)
-
-max_hbh_length - INTEGER
-	Maximum length allowed for a Hop-by-Hop options extension
-	header.
-	Default: INT_MAX (unlimited)
-
-skip_notify_on_dev_down - BOOLEAN
-	Controls whether an RTM_DELROUTE message is generated for routes
-	removed when a device is taken down or deleted. IPv4 does not
-	generate this message; IPv6 does by default. Setting this sysctl
-	to true skips the message, making IPv4 and IPv6 on par in relying
-	on userspace caches to track link events and evict routes.
-	Default: false (generate message)
-
-IPv6 Fragmentation:
-
-ip6frag_high_thresh - INTEGER
-	Maximum memory used to reassemble IPv6 fragments. When
-	ip6frag_high_thresh bytes of memory is allocated for this purpose,
-	the fragment handler will toss packets until ip6frag_low_thresh
-	is reached.
-
-ip6frag_low_thresh - INTEGER
-	See ip6frag_high_thresh
-
-ip6frag_time - INTEGER
-	Time in seconds to keep an IPv6 fragment in memory.
-
-IPv6 Segment Routing:
-
-seg6_flowlabel - INTEGER
-	Controls the behaviour of computing the flowlabel of outer
-	IPv6 header in case of SR T.encaps
-
-	-1 set flowlabel to zero.
-	0 copy flowlabel from Inner packet in case of Inner IPv6
-		(Set flowlabel to 0 in case IPv4/L2)
-	1 Compute the flowlabel using seg6_make_flowlabel()
-
-	Default is 0.
-
-conf/default/*:
-	Change the interface-specific default settings.
-
-
-conf/all/*:
-	Change all the interface-specific settings.
-
-	[XXX:  Other special features than forwarding?]
-
-conf/all/forwarding - BOOLEAN
-	Enable global IPv6 forwarding between all interfaces.
-
-	IPv4 and IPv6 work differently here; e.g. netfilter must be used
-	to control which interfaces may forward packets and which not.
-
-	This also sets all interfaces' Host/Router setting
-	'forwarding' to the specified value.  See below for details.
-
-	This referred to as global forwarding.
-
-proxy_ndp - BOOLEAN
-	Do proxy ndp.
-
-fwmark_reflect - BOOLEAN
-	Controls the fwmark of kernel-generated IPv6 reply packets that are not
-	associated with a socket for example, TCP RSTs or ICMPv6 echo replies).
-	If unset, these packets have a fwmark of zero. If set, they have the
-	fwmark of the packet they are replying to.
-	Default: 0
-
-conf/interface/*:
-	Change special settings per interface.
-
-	The functional behaviour for certain settings is different
-	depending on whether local forwarding is enabled or not.
-
-accept_ra - INTEGER
-	Accept Router Advertisements; autoconfigure using them.
-
-	It also determines whether or not to transmit Router
-	Solicitations. If and only if the functional setting is to
-	accept Router Advertisements, Router Solicitations will be
-	transmitted.
-
-	Possible values are:
-		0 Do not accept Router Advertisements.
-		1 Accept Router Advertisements if forwarding is disabled.
-		2 Overrule forwarding behaviour. Accept Router Advertisements
-		  even if forwarding is enabled.
-
-	Functional default: enabled if local forwarding is disabled.
-			    disabled if local forwarding is enabled.
-
-accept_ra_defrtr - BOOLEAN
-	Learn default router in Router Advertisement.
-
-	Functional default: enabled if accept_ra is enabled.
-			    disabled if accept_ra is disabled.
-
-accept_ra_from_local - BOOLEAN
-	Accept RA with source-address that is found on local machine
-        if the RA is otherwise proper and able to be accepted.
-        Default is to NOT accept these as it may be an un-intended
-        network loop.
-
-	Functional default:
-           enabled if accept_ra_from_local is enabled
-               on a specific interface.
-	   disabled if accept_ra_from_local is disabled
-               on a specific interface.
-
-accept_ra_min_hop_limit - INTEGER
-	Minimum hop limit Information in Router Advertisement.
-
-	Hop limit Information in Router Advertisement less than this
-	variable shall be ignored.
-
-	Default: 1
-
-accept_ra_pinfo - BOOLEAN
-	Learn Prefix Information in Router Advertisement.
-
-	Functional default: enabled if accept_ra is enabled.
-			    disabled if accept_ra is disabled.
-
-accept_ra_rt_info_min_plen - INTEGER
-	Minimum prefix length of Route Information in RA.
-
-	Route Information w/ prefix smaller than this variable shall
-	be ignored.
-
-	Functional default: 0 if accept_ra_rtr_pref is enabled.
-			    -1 if accept_ra_rtr_pref is disabled.
-
-accept_ra_rt_info_max_plen - INTEGER
-	Maximum prefix length of Route Information in RA.
-
-	Route Information w/ prefix larger than this variable shall
-	be ignored.
-
-	Functional default: 0 if accept_ra_rtr_pref is enabled.
-			    -1 if accept_ra_rtr_pref is disabled.
-
-accept_ra_rtr_pref - BOOLEAN
-	Accept Router Preference in RA.
-
-	Functional default: enabled if accept_ra is enabled.
-			    disabled if accept_ra is disabled.
-
-accept_ra_mtu - BOOLEAN
-	Apply the MTU value specified in RA option 5 (RFC4861). If
-	disabled, the MTU specified in the RA will be ignored.
-
-	Functional default: enabled if accept_ra is enabled.
-			    disabled if accept_ra is disabled.
-
-accept_redirects - BOOLEAN
-	Accept Redirects.
-
-	Functional default: enabled if local forwarding is disabled.
-			    disabled if local forwarding is enabled.
-
-accept_source_route - INTEGER
-	Accept source routing (routing extension header).
-
-	>= 0: Accept only routing header type 2.
-	< 0: Do not accept routing header.
-
-	Default: 0
-
-autoconf - BOOLEAN
-	Autoconfigure addresses using Prefix Information in Router
-	Advertisements.
-
-	Functional default: enabled if accept_ra_pinfo is enabled.
-			    disabled if accept_ra_pinfo is disabled.
-
-dad_transmits - INTEGER
-	The amount of Duplicate Address Detection probes to send.
-	Default: 1
-
-forwarding - INTEGER
-	Configure interface-specific Host/Router behaviour.
-
-	Note: It is recommended to have the same setting on all
-	interfaces; mixed router/host scenarios are rather uncommon.
-
-	Possible values are:
-		0 Forwarding disabled
-		1 Forwarding enabled
-
-	FALSE (0):
-
-	By default, Host behaviour is assumed.  This means:
-
-	1. IsRouter flag is not set in Neighbour Advertisements.
-	2. If accept_ra is TRUE (default), transmit Router
-	   Solicitations.
-	3. If accept_ra is TRUE (default), accept Router
-	   Advertisements (and do autoconfiguration).
-	4. If accept_redirects is TRUE (default), accept Redirects.
-
-	TRUE (1):
-
-	If local forwarding is enabled, Router behaviour is assumed.
-	This means exactly the reverse from the above:
-
-	1. IsRouter flag is set in Neighbour Advertisements.
-	2. Router Solicitations are not sent unless accept_ra is 2.
-	3. Router Advertisements are ignored unless accept_ra is 2.
-	4. Redirects are ignored.
-
-	Default: 0 (disabled) if global forwarding is disabled (default),
-		 otherwise 1 (enabled).
-
-hop_limit - INTEGER
-	Default Hop Limit to set.
-	Default: 64
-
-mtu - INTEGER
-	Default Maximum Transfer Unit
-	Default: 1280 (IPv6 required minimum)
-
-ip_nonlocal_bind - BOOLEAN
-	If set, allows processes to bind() to non-local IPv6 addresses,
-	which can be quite useful - but may break some applications.
-	Default: 0
-
-router_probe_interval - INTEGER
-	Minimum interval (in seconds) between Router Probing described
-	in RFC4191.
-
-	Default: 60
-
-router_solicitation_delay - INTEGER
-	Number of seconds to wait after interface is brought up
-	before sending Router Solicitations.
-	Default: 1
-
-router_solicitation_interval - INTEGER
-	Number of seconds to wait between Router Solicitations.
-	Default: 4
-
-router_solicitations - INTEGER
-	Number of Router Solicitations to send until assuming no
-	routers are present.
-	Default: 3
-
-use_oif_addrs_only - BOOLEAN
-	When enabled, the candidate source addresses for destinations
-	routed via this interface are restricted to the set of addresses
-	configured on this interface (vis. RFC 6724, section 4).
-
-	Default: false
-
-use_tempaddr - INTEGER
-	Preference for Privacy Extensions (RFC3041).
-	  <= 0 : disable Privacy Extensions
-	  == 1 : enable Privacy Extensions, but prefer public
-	         addresses over temporary addresses.
-	  >  1 : enable Privacy Extensions and prefer temporary
-	         addresses over public addresses.
-	Default:  0 (for most devices)
-		 -1 (for point-to-point devices and loopback devices)
-
-temp_valid_lft - INTEGER
-	valid lifetime (in seconds) for temporary addresses.
-	Default: 604800 (7 days)
-
-temp_prefered_lft - INTEGER
-	Preferred lifetime (in seconds) for temporary addresses.
-	Default: 86400 (1 day)
-
-keep_addr_on_down - INTEGER
-	Keep all IPv6 addresses on an interface down event. If set static
-	global addresses with no expiration time are not flushed.
-	  >0 : enabled
-	   0 : system default
-	  <0 : disabled
-
-	Default: 0 (addresses are removed)
-
-max_desync_factor - INTEGER
-	Maximum value for DESYNC_FACTOR, which is a random value
-	that ensures that clients don't synchronize with each
-	other and generate new addresses at exactly the same time.
-	value is in seconds.
-	Default: 600
-
-regen_max_retry - INTEGER
-	Number of attempts before give up attempting to generate
-	valid temporary addresses.
-	Default: 5
-
-max_addresses - INTEGER
-	Maximum number of autoconfigured addresses per interface.  Setting
-	to zero disables the limitation.  It is not recommended to set this
-	value too large (or to zero) because it would be an easy way to
-	crash the kernel by allowing too many addresses to be created.
-	Default: 16
-
-disable_ipv6 - BOOLEAN
-	Disable IPv6 operation.  If accept_dad is set to 2, this value
-	will be dynamically set to TRUE if DAD fails for the link-local
-	address.
-	Default: FALSE (enable IPv6 operation)
-
-	When this value is changed from 1 to 0 (IPv6 is being enabled),
-	it will dynamically create a link-local address on the given
-	interface and start Duplicate Address Detection, if necessary.
-
-	When this value is changed from 0 to 1 (IPv6 is being disabled),
-	it will dynamically delete all addresses and routes on the given
-	interface. From now on it will not possible to add addresses/routes
-	to the selected interface.
-
-accept_dad - INTEGER
-	Whether to accept DAD (Duplicate Address Detection).
-	0: Disable DAD
-	1: Enable DAD (default)
-	2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
-	   link-local address has been found.
-
-	DAD operation and mode on a given interface will be selected according
-	to the maximum value of conf/{all,interface}/accept_dad.
-
-force_tllao - BOOLEAN
-	Enable sending the target link-layer address option even when
-	responding to a unicast neighbor solicitation.
-	Default: FALSE
-
-	Quoting from RFC 2461, section 4.4, Target link-layer address:
-
-	"The option MUST be included for multicast solicitations in order to
-	avoid infinite Neighbor Solicitation "recursion" when the peer node
-	does not have a cache entry to return a Neighbor Advertisements
-	message.  When responding to unicast solicitations, the option can be
-	omitted since the sender of the solicitation has the correct link-
-	layer address; otherwise it would not have be able to send the unicast
-	solicitation in the first place. However, including the link-layer
-	address in this case adds little overhead and eliminates a potential
-	race condition where the sender deletes the cached link-layer address
-	prior to receiving a response to a previous solicitation."
-
-ndisc_notify - BOOLEAN
-	Define mode for notification of address and device changes.
-	0 - (default): do nothing
-	1 - Generate unsolicited neighbour advertisements when device is brought
-	    up or hardware address changes.
-
-ndisc_tclass - INTEGER
-	The IPv6 Traffic Class to use by default when sending IPv6 Neighbor
-	Discovery (Router Solicitation, Router Advertisement, Neighbor
-	Solicitation, Neighbor Advertisement, Redirect) messages.
-	These 8 bits can be interpreted as 6 high order bits holding the DSCP
-	value and 2 low order bits representing ECN (which you probably want
-	to leave cleared).
-	0 - (default)
-
-mldv1_unsolicited_report_interval - INTEGER
-	The interval in milliseconds in which the next unsolicited
-	MLDv1 report retransmit will take place.
-	Default: 10000 (10 seconds)
-
-mldv2_unsolicited_report_interval - INTEGER
-	The interval in milliseconds in which the next unsolicited
-	MLDv2 report retransmit will take place.
-	Default: 1000 (1 second)
-
-force_mld_version - INTEGER
-	0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
-	1 - Enforce to use MLD version 1
-	2 - Enforce to use MLD version 2
-
-suppress_frag_ndisc - INTEGER
-	Control RFC 6980 (Security Implications of IPv6 Fragmentation
-	with IPv6 Neighbor Discovery) behavior:
-	1 - (default) discard fragmented neighbor discovery packets
-	0 - allow fragmented neighbor discovery packets
-
-optimistic_dad - BOOLEAN
-	Whether to perform Optimistic Duplicate Address Detection (RFC 4429).
-	0: disabled (default)
-	1: enabled
-
-	Optimistic Duplicate Address Detection for the interface will be enabled
-	if at least one of conf/{all,interface}/optimistic_dad is set to 1,
-	it will be disabled otherwise.
-
-use_optimistic - BOOLEAN
-	If enabled, do not classify optimistic addresses as deprecated during
-	source address selection.  Preferred addresses will still be chosen
-	before optimistic addresses, subject to other ranking in the source
-	address selection algorithm.
-	0: disabled (default)
-	1: enabled
-
-	This will be enabled if at least one of
-	conf/{all,interface}/use_optimistic is set to 1, disabled otherwise.
-
-stable_secret - IPv6 address
-	This IPv6 address will be used as a secret to generate IPv6
-	addresses for link-local addresses and autoconfigured
-	ones. All addresses generated after setting this secret will
-	be stable privacy ones by default. This can be changed via the
-	addrgenmode ip-link. conf/default/stable_secret is used as the
-	secret for the namespace, the interface specific ones can
-	overwrite that. Writes to conf/all/stable_secret are refused.
-
-	It is recommended to generate this secret during installation
-	of a system and keep it stable after that.
-
-	By default the stable secret is unset.
-
-addr_gen_mode - INTEGER
-	Defines how link-local and autoconf addresses are generated.
-
-	0: generate address based on EUI64 (default)
-	1: do no generate a link-local address, use EUI64 for addresses generated
-	   from autoconf
-	2: generate stable privacy addresses, using the secret from
-	   stable_secret (RFC7217)
-	3: generate stable privacy addresses, using a random secret if unset
-
-drop_unicast_in_l2_multicast - BOOLEAN
-	Drop any unicast IPv6 packets that are received in link-layer
-	multicast (or broadcast) frames.
-
-	By default this is turned off.
-
-drop_unsolicited_na - BOOLEAN
-	Drop all unsolicited neighbor advertisements, for example if there's
-	a known good NA proxy on the network and such frames need not be used
-	(or in the case of 802.11, must not be used to prevent attacks.)
-
-	By default this is turned off.
-
-enhanced_dad - BOOLEAN
-	Include a nonce option in the IPv6 neighbor solicitation messages used for
-	duplicate address detection per RFC7527. A received DAD NS will only signal
-	a duplicate address if the nonce is different. This avoids any false
-	detection of duplicates due to loopback of the NS messages that we send.
-	The nonce option will be sent on an interface unless both of
-	conf/{all,interface}/enhanced_dad are set to FALSE.
-	Default: TRUE
-
-icmp/*:
-ratelimit - INTEGER
-	Limit the maximal rates for sending ICMPv6 messages.
-	0 to disable any limiting,
-	otherwise the minimal space between responses in milliseconds.
-	Default: 1000
-
-ratemask - list of comma separated ranges
-	For ICMPv6 message types matching the ranges in the ratemask, limit
-	the sending of the message according to ratelimit parameter.
-
-	The format used for both input and output is a comma separated
-	list of ranges (e.g. "0-127,129" for ICMPv6 message type 0 to 127 and
-	129). Writing to the file will clear all previous ranges of ICMPv6
-	message types and update the current list with the input.
-
-	Refer to: https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml
-	for numerical values of ICMPv6 message types, e.g. echo request is 128
-	and echo reply is 129.
-
-	Default: 0-1,3-127 (rate limit ICMPv6 errors except Packet Too Big)
-
-echo_ignore_all - BOOLEAN
-	If set non-zero, then the kernel will ignore all ICMP ECHO
-	requests sent to it over the IPv6 protocol.
-	Default: 0
-
-echo_ignore_multicast - BOOLEAN
-	If set non-zero, then the kernel will ignore all ICMP ECHO
-	requests sent to it over the IPv6 protocol via multicast.
-	Default: 0
-
-echo_ignore_anycast - BOOLEAN
-	If set non-zero, then the kernel will ignore all ICMP ECHO
-	requests sent to it over the IPv6 protocol destined to anycast address.
-	Default: 0
-
-xfrm6_gc_thresh - INTEGER
-	(Obsolete since linux-4.14)
-	The threshold at which we will start garbage collecting for IPv6
-	destination cache entries.  At twice this value the system will
-	refuse new allocations.
-
-
-IPv6 Update by:
-Pekka Savola <pekkas@netcore.fi>
-YOSHIFUJI Hideaki / USAGI Project <yoshfuji@linux-ipv6.org>
-
-
-/proc/sys/net/bridge/* Variables:
-
-bridge-nf-call-arptables - BOOLEAN
-	1 : pass bridged ARP traffic to arptables' FORWARD chain.
-	0 : disable this.
-	Default: 1
-
-bridge-nf-call-iptables - BOOLEAN
-	1 : pass bridged IPv4 traffic to iptables' chains.
-	0 : disable this.
-	Default: 1
-
-bridge-nf-call-ip6tables - BOOLEAN
-	1 : pass bridged IPv6 traffic to ip6tables' chains.
-	0 : disable this.
-	Default: 1
-
-bridge-nf-filter-vlan-tagged - BOOLEAN
-	1 : pass bridged vlan-tagged ARP/IP/IPv6 traffic to {arp,ip,ip6}tables.
-	0 : disable this.
-	Default: 0
-
-bridge-nf-filter-pppoe-tagged - BOOLEAN
-	1 : pass bridged pppoe-tagged IP/IPv6 traffic to {ip,ip6}tables.
-	0 : disable this.
-	Default: 0
-
-bridge-nf-pass-vlan-input-dev - BOOLEAN
-	1: if bridge-nf-filter-vlan-tagged is enabled, try to find a vlan
-	interface on the bridge and set the netfilter input device to the vlan.
-	This allows use of e.g. "iptables -i br0.1" and makes the REDIRECT
-	target work with vlan-on-top-of-bridge interfaces.  When no matching
-	vlan interface is found, or this switch is off, the input device is
-	set to the bridge interface.
-	0: disable bridge netfilter vlan interface lookup.
-	Default: 0
-
-proc/sys/net/sctp/* Variables:
-
-addip_enable - BOOLEAN
-	Enable or disable extension of  Dynamic Address Reconfiguration
-	(ADD-IP) functionality specified in RFC5061.  This extension provides
-	the ability to dynamically add and remove new addresses for the SCTP
-	associations.
-
-	1: Enable extension.
-
-	0: Disable extension.
-
-	Default: 0
-
-pf_enable - INTEGER
-	Enable or disable pf (pf is short for potentially failed) state. A value
-	of pf_retrans > path_max_retrans also disables pf state. That is, one of
-	both pf_enable and pf_retrans > path_max_retrans can disable pf state.
-	Since pf_retrans and path_max_retrans can be changed by userspace
-	application, sometimes user expects to disable pf state by the value of
-	pf_retrans > path_max_retrans, but occasionally the value of pf_retrans
-	or path_max_retrans is changed by the user application, this pf state is
-	enabled. As such, it is necessary to add this to dynamically enable
-	and disable pf state. See:
-	https://datatracker.ietf.org/doc/draft-ietf-tsvwg-sctp-failover for
-	details.
-
-	1: Enable pf.
-
-	0: Disable pf.
-
-	Default: 1
-
-pf_expose - INTEGER
-	Unset or enable/disable pf (pf is short for potentially failed) state
-	exposure.  Applications can control the exposure of the PF path state
-	in the SCTP_PEER_ADDR_CHANGE event and the SCTP_GET_PEER_ADDR_INFO
-	sockopt.   When it's unset, no SCTP_PEER_ADDR_CHANGE event with
-	SCTP_ADDR_PF state will be sent and a SCTP_PF-state transport info
-	can be got via SCTP_GET_PEER_ADDR_INFO sockopt;  When it's enabled,
-	a SCTP_PEER_ADDR_CHANGE event will be sent for a transport becoming
-	SCTP_PF state and a SCTP_PF-state transport info can be got via
-	SCTP_GET_PEER_ADDR_INFO sockopt;  When it's diabled, no
-	SCTP_PEER_ADDR_CHANGE event will be sent and it returns -EACCES when
-	trying to get a SCTP_PF-state transport info via SCTP_GET_PEER_ADDR_INFO
-	sockopt.
-
-	0: Unset pf state exposure, Compatible with old applications.
-
-	1: Disable pf state exposure.
-
-	2: Enable pf state exposure.
-
-	Default: 0
-
-addip_noauth_enable - BOOLEAN
-	Dynamic Address Reconfiguration (ADD-IP) requires the use of
-	authentication to protect the operations of adding or removing new
-	addresses.  This requirement is mandated so that unauthorized hosts
-	would not be able to hijack associations.  However, older
-	implementations may not have implemented this requirement while
-	allowing the ADD-IP extension.  For reasons of interoperability,
-	we provide this variable to control the enforcement of the
-	authentication requirement.
-
-	1: Allow ADD-IP extension to be used without authentication.  This
-	   should only be set in a closed environment for interoperability
-	   with older implementations.
-
-	0: Enforce the authentication requirement
-
-	Default: 0
-
-auth_enable - BOOLEAN
-	Enable or disable Authenticated Chunks extension.  This extension
-	provides the ability to send and receive authenticated chunks and is
-	required for secure operation of Dynamic Address Reconfiguration
-	(ADD-IP) extension.
-
-	1: Enable this extension.
-	0: Disable this extension.
-
-	Default: 0
-
-prsctp_enable - BOOLEAN
-	Enable or disable the Partial Reliability extension (RFC3758) which
-	is used to notify peers that a given DATA should no longer be expected.
-
-	1: Enable extension
-	0: Disable
-
-	Default: 1
-
-max_burst - INTEGER
-	The limit of the number of new packets that can be initially sent.  It
-	controls how bursty the generated traffic can be.
-
-	Default: 4
-
-association_max_retrans - INTEGER
-	Set the maximum number for retransmissions that an association can
-	attempt deciding that the remote end is unreachable.  If this value
-	is exceeded, the association is terminated.
-
-	Default: 10
-
-max_init_retransmits - INTEGER
-	The maximum number of retransmissions of INIT and COOKIE-ECHO chunks
-	that an association will attempt before declaring the destination
-	unreachable and terminating.
-
-	Default: 8
-
-path_max_retrans - INTEGER
-	The maximum number of retransmissions that will be attempted on a given
-	path.  Once this threshold is exceeded, the path is considered
-	unreachable, and new traffic will use a different path when the
-	association is multihomed.
-
-	Default: 5
-
-pf_retrans - INTEGER
-	The number of retransmissions that will be attempted on a given path
-	before traffic is redirected to an alternate transport (should one
-	exist).  Note this is distinct from path_max_retrans, as a path that
-	passes the pf_retrans threshold can still be used.  Its only
-	deprioritized when a transmission path is selected by the stack.  This
-	setting is primarily used to enable fast failover mechanisms without
-	having to reduce path_max_retrans to a very low value.  See:
-	http://www.ietf.org/id/draft-nishida-tsvwg-sctp-failover-05.txt
-	for details.  Note also that a value of pf_retrans > path_max_retrans
-	disables this feature. Since both pf_retrans and path_max_retrans can
-	be changed by userspace application, a variable pf_enable is used to
-	disable pf state.
-
-	Default: 0
-
-ps_retrans - INTEGER
-	Primary.Switchover.Max.Retrans (PSMR), it's a tunable parameter coming
-	from section-5 "Primary Path Switchover" in rfc7829.  The primary path
-	will be changed to another active path when the path error counter on
-	the old primary path exceeds PSMR, so that "the SCTP sender is allowed
-	to continue data transmission on a new working path even when the old
-	primary destination address becomes active again".   Note this feature
-	is disabled by initializing 'ps_retrans' per netns as 0xffff by default,
-	and its value can't be less than 'pf_retrans' when changing by sysctl.
-
-	Default: 0xffff
-
-rto_initial - INTEGER
-	The initial round trip timeout value in milliseconds that will be used
-	in calculating round trip times.  This is the initial time interval
-	for retransmissions.
-
-	Default: 3000
-
-rto_max - INTEGER
-	The maximum value (in milliseconds) of the round trip timeout.  This
-	is the largest time interval that can elapse between retransmissions.
-
-	Default: 60000
-
-rto_min - INTEGER
-	The minimum value (in milliseconds) of the round trip timeout.  This
-	is the smallest time interval the can elapse between retransmissions.
-
-	Default: 1000
-
-hb_interval - INTEGER
-	The interval (in milliseconds) between HEARTBEAT chunks.  These chunks
-	are sent at the specified interval on idle paths to probe the state of
-	a given path between 2 associations.
-
-	Default: 30000
-
-sack_timeout - INTEGER
-	The amount of time (in milliseconds) that the implementation will wait
-	to send a SACK.
-
-	Default: 200
-
-valid_cookie_life - INTEGER
-	The default lifetime of the SCTP cookie (in milliseconds).  The cookie
-	is used during association establishment.
-
-	Default: 60000
-
-cookie_preserve_enable - BOOLEAN
-	Enable or disable the ability to extend the lifetime of the SCTP cookie
-	that is used during the establishment phase of SCTP association
-
-	1: Enable cookie lifetime extension.
-	0: Disable
-
-	Default: 1
-
-cookie_hmac_alg - STRING
-	Select the hmac algorithm used when generating the cookie value sent by
-	a listening sctp socket to a connecting client in the INIT-ACK chunk.
-	Valid values are:
-	* md5
-	* sha1
-	* none
-	Ability to assign md5 or sha1 as the selected alg is predicated on the
-	configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
-	CONFIG_CRYPTO_SHA1).
-
-	Default: Dependent on configuration.  MD5 if available, else SHA1 if
-	available, else none.
-
-rcvbuf_policy - INTEGER
-	Determines if the receive buffer is attributed to the socket or to
-	association.   SCTP supports the capability to create multiple
-	associations on a single socket.  When using this capability, it is
-	possible that a single stalled association that's buffering a lot
-	of data may block other associations from delivering their data by
-	consuming all of the receive buffer space.  To work around this,
-	the rcvbuf_policy could be set to attribute the receiver buffer space
-	to each association instead of the socket.  This prevents the described
-	blocking.
-
-	1: rcvbuf space is per association
-	0: rcvbuf space is per socket
-
-	Default: 0
-
-sndbuf_policy - INTEGER
-	Similar to rcvbuf_policy above, this applies to send buffer space.
-
-	1: Send buffer is tracked per association
-	0: Send buffer is tracked per socket.
-
-	Default: 0
-
-sctp_mem - vector of 3 INTEGERs: min, pressure, max
-	Number of pages allowed for queueing by all SCTP sockets.
-
-	min: Below this number of pages SCTP is not bothered about its
-	memory appetite. When amount of memory allocated by SCTP exceeds
-	this number, SCTP starts to moderate memory usage.
-
-	pressure: This value was introduced to follow format of tcp_mem.
-
-	max: Number of pages allowed for queueing by all SCTP sockets.
-
-	Default is calculated at boot time from amount of available memory.
-
-sctp_rmem - vector of 3 INTEGERs: min, default, max
-	Only the first value ("min") is used, "default" and "max" are
-	ignored.
-
-	min: Minimal size of receive buffer used by SCTP socket.
-	It is guaranteed to each SCTP socket (but not association) even
-	under moderate memory pressure.
-
-	Default: 4K
-
-sctp_wmem  - vector of 3 INTEGERs: min, default, max
-	Currently this tunable has no effect.
-
-addr_scope_policy - INTEGER
-	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
-
-	0   - Disable IPv4 address scoping
-	1   - Enable IPv4 address scoping
-	2   - Follow draft but allow IPv4 private addresses
-	3   - Follow draft but allow IPv4 link local addresses
-
-	Default: 1
-
-
-/proc/sys/net/core/*
-	Please see: Documentation/admin-guide/sysctl/net.rst for descriptions of these entries.
-
-
-/proc/sys/net/unix/*
-max_dgram_qlen - INTEGER
-	The maximum length of dgram socket receive queue
-
-	Default: 10
-
diff --git a/Documentation/networking/ip_dynaddr.rst b/Documentation/networking/ip_dynaddr.rst
new file mode 100644
index 000000000000..eacc0c780c7f
--- /dev/null
+++ b/Documentation/networking/ip_dynaddr.rst
@@ -0,0 +1,40 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+IP dynamic address hack-port v0.03
+==================================
+
+This stuff allows diald ONESHOT connections to get established by
+dynamically changing packet source address (and socket's if local procs).
+It is implemented for TCP diald-box connections(1) and IP_MASQuerading(2).
+
+If enabled\ [#]_ and forwarding interface has changed:
+
+  1)  Socket (and packet) source address is rewritten ON RETRANSMISSIONS
+      while in SYN_SENT state (diald-box processes).
+  2)  Out-bounded MASQueraded source address changes ON OUTPUT (when
+      internal host does retransmission) until a packet from outside is
+      received by the tunnel.
+
+This is specially helpful for auto dialup links (diald), where the
+``actual`` outgoing address is unknown at the moment the link is
+going up. So, the *same* (local AND masqueraded) connections requests that
+bring the link up will be able to get established.
+
+.. [#] At boot, by default no address rewriting is attempted.
+
+  To enable::
+
+     # echo 1 > /proc/sys/net/ipv4/ip_dynaddr
+
+  To enable verbose mode::
+
+    # echo 2 > /proc/sys/net/ipv4/ip_dynaddr
+
+  To disable (default)::
+
+     # echo 0 > /proc/sys/net/ipv4/ip_dynaddr
+
+Enjoy!
+
+Juanjo  <jjciarla@raiz.uncu.edu.ar>
diff --git a/Documentation/networking/ip_dynaddr.txt b/Documentation/networking/ip_dynaddr.txt
deleted file mode 100644
index 45f3c1268e86..000000000000
--- a/Documentation/networking/ip_dynaddr.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-IP dynamic address hack-port v0.03
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-This stuff allows diald ONESHOT connections to get established by
-dynamically changing packet source address (and socket's if local procs).
-It is implemented for TCP diald-box connections(1) and IP_MASQuerading(2).
-
-If enabled[*] and forwarding interface has changed:
-  1)  Socket (and packet) source address is rewritten ON RETRANSMISSIONS
-      while in SYN_SENT state (diald-box processes).
-  2)  Out-bounded MASQueraded source address changes ON OUTPUT (when
-      internal host does retransmission) until a packet from outside is
-      received by the tunnel.
-
-This is specially helpful for auto dialup links (diald), where the
-``actual'' outgoing address is unknown at the moment the link is
-going up. So, the *same* (local AND masqueraded) connections requests that
-bring the link up will be able to get established.
-
-[*] At boot, by default no address rewriting is attempted. 
-  To enable:
-     # echo 1 > /proc/sys/net/ipv4/ip_dynaddr
-  To enable verbose mode:
-     # echo 2 > /proc/sys/net/ipv4/ip_dynaddr
-  To disable (default)
-     # echo 0 > /proc/sys/net/ipv4/ip_dynaddr
-
-Enjoy!
-
--- Juanjo  <jjciarla@raiz.uncu.edu.ar>
diff --git a/Documentation/networking/ipddp.rst b/Documentation/networking/ipddp.rst
new file mode 100644
index 000000000000..be7091b77927
--- /dev/null
+++ b/Documentation/networking/ipddp.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================================
+AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
+=========================================================
+
+Documentation ipddp.c
+
+This file is written by Jay Schulist <jschlst@samba.org>
+
+Introduction
+------------
+
+AppleTalk-IP (IPDDP) is the method computers connected to AppleTalk
+networks can use to communicate via IP. AppleTalk-IP is simply IP datagrams
+inside AppleTalk packets.
+
+Through this driver you can either allow your Linux box to communicate
+IP over an AppleTalk network or you can provide IP gatewaying functions
+for your AppleTalk users.
+
+You can currently encapsulate or decapsulate AppleTalk-IP on LocalTalk,
+EtherTalk and PPPTalk. The only limit on the protocol is that of what
+kernel AppleTalk layer and drivers are available.
+
+Each mode requires its own user space software.
+
+Compiling AppleTalk-IP Decapsulation/Encapsulation
+==================================================
+
+AppleTalk-IP decapsulation needs to be compiled into your kernel. You
+will need to turn on AppleTalk-IP driver support. Then you will need to
+select ONE of the two options; IP to AppleTalk-IP encapsulation support or
+AppleTalk-IP to IP decapsulation support. If you compile the driver
+statically you will only be able to use the driver for the function you have
+enabled in the kernel. If you compile the driver as a module you can
+select what mode you want it to run in via a module loading param.
+ipddp_mode=1 for AppleTalk-IP encapsulation and ipddp_mode=2 for
+AppleTalk-IP to IP decapsulation.
+
+Basic instructions for user space tools
+=======================================
+
+I will briefly describe the operation of the tools, but you will
+need to consult the supporting documentation for each set of tools.
+
+Decapsulation - You will need to download a software package called
+MacGate. In this distribution there will be a tool called MacRoute
+which enables you to add routes to the kernel for your Macs by hand.
+Also the tool MacRegGateWay is included to register the
+proper IP Gateway and IP addresses for your machine. Included in this
+distribution is a patch to netatalk-1.4b2+asun2.0a17.2 (available from
+ftp.u.washington.edu/pub/user-supported/asun/) this patch is optional
+but it allows automatic adding and deleting of routes for Macs. (Handy
+for locations with large Mac installations)
+
+Encapsulation - You will need to download a software daemon called ipddpd.
+This software expects there to be an AppleTalk-IP gateway on the network.
+You will also need to add the proper routes to route your Linux box's IP
+traffic out the ipddp interface.
+
+Common Uses of ipddp.c
+----------------------
+Of course AppleTalk-IP decapsulation and encapsulation, but specifically
+decapsulation is being used most for connecting LocalTalk networks to
+IP networks. Although it has been used on EtherTalk networks to allow
+Macs that are only able to tunnel IP over EtherTalk.
+
+Encapsulation has been used to allow a Linux box stuck on a LocalTalk
+network to use IP. It should work equally well if you are stuck on an
+EtherTalk only network.
+
+Further Assistance
+-------------------
+You can contact me (Jay Schulist <jschlst@samba.org>) with any
+questions regarding decapsulation or encapsulation. Bradford W. Johnson
+<johns393@maroon.tc.umn.edu> originally wrote the ipddp.c driver for IP
+encapsulation in AppleTalk.
diff --git a/Documentation/networking/ipddp.txt b/Documentation/networking/ipddp.txt
deleted file mode 100644
index ba5c217fffe0..000000000000
--- a/Documentation/networking/ipddp.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Text file for ipddp.c:
-	AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
-
-This text file is written by Jay Schulist <jschlst@samba.org>
-
-Introduction
-------------
-
-AppleTalk-IP (IPDDP) is the method computers connected to AppleTalk
-networks can use to communicate via IP. AppleTalk-IP is simply IP datagrams
-inside AppleTalk packets.
-
-Through this driver you can either allow your Linux box to communicate
-IP over an AppleTalk network or you can provide IP gatewaying functions
-for your AppleTalk users.
-
-You can currently encapsulate or decapsulate AppleTalk-IP on LocalTalk,
-EtherTalk and PPPTalk. The only limit on the protocol is that of what
-kernel AppleTalk layer and drivers are available.
-
-Each mode requires its own user space software.
-
-Compiling AppleTalk-IP Decapsulation/Encapsulation
-=================================================
-
-AppleTalk-IP decapsulation needs to be compiled into your kernel. You
-will need to turn on AppleTalk-IP driver support. Then you will need to
-select ONE of the two options; IP to AppleTalk-IP encapsulation support or
-AppleTalk-IP to IP decapsulation support. If you compile the driver
-statically you will only be able to use the driver for the function you have
-enabled in the kernel. If you compile the driver as a module you can
-select what mode you want it to run in via a module loading param.
-ipddp_mode=1 for AppleTalk-IP encapsulation and ipddp_mode=2 for
-AppleTalk-IP to IP decapsulation.
-
-Basic instructions for user space tools
-=======================================
-
-I will briefly describe the operation of the tools, but you will
-need to consult the supporting documentation for each set of tools.
-
-Decapsulation - You will need to download a software package called
-MacGate. In this distribution there will be a tool called MacRoute
-which enables you to add routes to the kernel for your Macs by hand.
-Also the tool MacRegGateWay is included to register the
-proper IP Gateway and IP addresses for your machine. Included in this
-distribution is a patch to netatalk-1.4b2+asun2.0a17.2 (available from
-ftp.u.washington.edu/pub/user-supported/asun/) this patch is optional
-but it allows automatic adding and deleting of routes for Macs. (Handy
-for locations with large Mac installations)
-
-Encapsulation - You will need to download a software daemon called ipddpd.
-This software expects there to be an AppleTalk-IP gateway on the network.
-You will also need to add the proper routes to route your Linux box's IP
-traffic out the ipddp interface.
-
-Common Uses of ipddp.c
-----------------------
-Of course AppleTalk-IP decapsulation and encapsulation, but specifically
-decapsulation is being used most for connecting LocalTalk networks to
-IP networks. Although it has been used on EtherTalk networks to allow
-Macs that are only able to tunnel IP over EtherTalk.
-
-Encapsulation has been used to allow a Linux box stuck on a LocalTalk
-network to use IP. It should work equally well if you are stuck on an
-EtherTalk only network.
-
-Further Assistance
--------------------
-You can contact me (Jay Schulist <jschlst@samba.org>) with any
-questions regarding decapsulation or encapsulation. Bradford W. Johnson
-<johns393@maroon.tc.umn.edu> originally wrote the ipddp.c driver for IP
-encapsulation in AppleTalk.
diff --git a/Documentation/networking/iphase.rst b/Documentation/networking/iphase.rst
new file mode 100644
index 000000000000..92d9b757d75a
--- /dev/null
+++ b/Documentation/networking/iphase.rst
@@ -0,0 +1,193 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+ATM (i)Chip IA Linux Driver Source
+==================================
+
+			      READ ME FISRT
+
+--------------------------------------------------------------------------------
+
+		     Read This Before You Begin!
+
+--------------------------------------------------------------------------------
+
+Description
+===========
+
+This is the README file for the Interphase PCI ATM (i)Chip IA Linux driver
+source release.
+
+The features and limitations of this driver are as follows:
+
+    - A single VPI (VPI value of 0) is supported.
+    - Supports 4K VCs for the server board (with 512K control memory) and 1K
+      VCs for the client board (with 128K control memory).
+    - UBR, ABR and CBR service categories are supported.
+    - Only AAL5 is supported.
+    - Supports setting of PCR on the VCs.
+    - Multiple adapters in a system are supported.
+    - All variants of Interphase ATM PCI (i)Chip adapter cards are supported,
+      including x575 (OC3, control memory 128K , 512K and packet memory 128K,
+      512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See
+      http://www.iphase.com/
+      for details.
+    - Only x86 platforms are supported.
+    - SMP is supported.
+
+
+Before You Start
+================
+
+
+Installation
+------------
+
+1. Installing the adapters in the system
+
+   To install the ATM adapters in the system, follow the steps below.
+
+       a. Login as root.
+       b. Shut down the system and power off the system.
+       c. Install one or more ATM adapters in the system.
+       d. Connect each adapter to a port on an ATM switch. The green 'Link'
+	  LED on the front panel of the adapter will be on if the adapter is
+	  connected to the switch properly when the system is powered up.
+       e. Power on and boot the system.
+
+2. [ Removed ]
+
+3. Rebuild kernel with ABR support
+
+   [ a. and b. removed ]
+
+    c. Reconfigure the kernel, choose the Interphase ia driver through "make
+       menuconfig" or "make xconfig".
+    d. Rebuild the kernel, loadable modules and the atm tools.
+    e. Install the new built kernel and modules and reboot.
+
+4. Load the adapter hardware driver (ia driver) if it is built as a module
+
+       a. Login as root.
+       b. Change directory to /lib/modules/<kernel-version>/atm.
+       c. Run "insmod suni.o;insmod iphase.o"
+	  The yellow 'status' LED on the front panel of the adapter will blink
+	  while the driver is loaded in the system.
+       d. To verify that the 'ia' driver is loaded successfully, run the
+	  following command::
+
+	      cat /proc/atm/devices
+
+	  If the driver is loaded successfully, the output of the command will
+	  be similar to the following lines::
+
+	      Itf Type    ESI/"MAC"addr AAL(TX,err,RX,err,drop) ...
+	      0   ia      xxxxxxxxx  0 ( 0 0 0 0 0 )  5 ( 0 0 0 0 0 )
+
+	  You can also check the system log file /var/log/messages for messages
+	  related to the ATM driver.
+
+5. Ia Driver Configuration
+
+5.1 Configuration of adapter buffers
+    The (i)Chip boards have 3 different packet RAM size variants: 128K, 512K and
+    1M. The RAM size decides the number of buffers and buffer size. The default
+    size and number of buffers are set as following:
+
+	=========  =======  ======   ======   ======   ======   ======
+	 Total     Rx RAM   Tx RAM   Rx Buf   Tx Buf   Rx buf   Tx buf
+	 RAM size  size     size     size     size     cnt      cnt
+	=========  =======  ======   ======   ======   ======   ======
+	   128K      64K      64K      10K      10K       6        6
+	   512K     256K     256K      10K      10K      25       25
+	     1M     512K     512K      10K      10K      51       51
+	=========  =======  ======   ======   ======   ======   ======
+
+       These setting should work well in most environments, but can be
+       changed by typing the following command::
+
+	   insmod <IA_DIR>/ia.o IA_RX_BUF=<RX_CNT> IA_RX_BUF_SZ=<RX_SIZE> \
+		   IA_TX_BUF=<TX_CNT> IA_TX_BUF_SZ=<TX_SIZE>
+
+       Where:
+
+	    - RX_CNT = number of receive buffers in the range (1-128)
+	    - RX_SIZE = size of receive buffers in the range (48-64K)
+	    - TX_CNT = number of transmit buffers in the range (1-128)
+	    - TX_SIZE = size of transmit buffers in the range (48-64K)
+
+	    1. Transmit and receive buffer size must be a multiple of 4.
+	    2. Care should be taken so that the memory required for the
+	       transmit and receive buffers is less than or equal to the
+	       total adapter packet memory.
+
+5.2 Turn on ia debug trace
+
+    When the ia driver is built with the CONFIG_ATM_IA_DEBUG flag, the driver
+    can provide more debug trace if needed. There is a bit mask variable,
+    IADebugFlag, which controls the output of the traces. You can find the bit
+    map of the IADebugFlag in iphase.h.
+    The debug trace can be turn on through the insmod command line option, for
+    example, "insmod iphase.o IADebugFlag=0xffffffff" can turn on all the debug
+    traces together with loading the driver.
+
+6. Ia Driver Test Using ttcp_atm and PVC
+
+   For the PVC setup, the test machines can either be connected back-to-back or
+   through a switch. If connected through the switch, the switch must be
+   configured for the PVC(s).
+
+   a. For UBR test:
+
+      At the test machine intended to receive data, type::
+
+	 ttcp_atm -r -a -s 0.100
+
+      At the other test machine, type::
+
+	 ttcp_atm -t -a -s 0.100 -n 10000
+
+      Run "ttcp_atm -h" to display more options of the ttcp_atm tool.
+   b. For ABR test:
+
+      It is the same as the UBR testing, but with an extra command option::
+
+	 -Pabr:max_pcr=<xxx>
+
+      where:
+
+	     xxx = the maximum peak cell rate, from 170 - 353207.
+
+      This option must be set on both the machines.
+
+   c. For CBR test:
+
+      It is the same as the UBR testing, but with an extra command option::
+
+	 -Pcbr:max_pcr=<xxx>
+
+      where:
+
+	     xxx = the maximum peak cell rate, from 170 - 353207.
+
+      This option may only be set on the transmit machine.
+
+
+Outstanding Issues
+==================
+
+
+
+Contact Information
+-------------------
+
+::
+
+     Customer Support:
+	 United States:	Telephone:	(214) 654-5555
+			Fax:		(214) 654-5500
+			E-Mail:		intouch@iphase.com
+	 Europe:	Telephone:	33 (0)1 41 15 44 00
+			Fax:		33 (0)1 41 15 12 13
+     World Wide Web:	http://www.iphase.com
+     Anonymous FTP:	ftp.iphase.com
diff --git a/Documentation/networking/iphase.txt b/Documentation/networking/iphase.txt
deleted file mode 100644
index 670b72f16585..000000000000
--- a/Documentation/networking/iphase.txt
+++ /dev/null
@@ -1,158 +0,0 @@
-
-                              READ ME FISRT
-		  ATM (i)Chip IA Linux Driver Source
---------------------------------------------------------------------------------
-                     Read This Before You Begin!
---------------------------------------------------------------------------------
-
-Description
------------
-
-This is the README file for the Interphase PCI ATM (i)Chip IA Linux driver 
-source release.
-
-The features and limitations of this driver are as follows:
-    - A single VPI (VPI value of 0) is supported.
-    - Supports 4K VCs for the server board (with 512K control memory) and 1K 
-      VCs for the client board (with 128K control memory).
-    - UBR, ABR and CBR service categories are supported.
-    - Only AAL5 is supported. 
-    - Supports setting of PCR on the VCs. 
-    - Multiple adapters in a system are supported.
-    - All variants of Interphase ATM PCI (i)Chip adapter cards are supported, 
-      including x575 (OC3, control memory 128K , 512K and packet memory 128K, 
-      512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See 
-      http://www.iphase.com/
-      for details.
-    - Only x86 platforms are supported.
-    - SMP is supported.
-
-
-Before You Start
----------------- 
-
-
-Installation
-------------
-
-1. Installing the adapters in the system
-   To install the ATM adapters in the system, follow the steps below.
-       a. Login as root.
-       b. Shut down the system and power off the system.
-       c. Install one or more ATM adapters in the system.
-       d. Connect each adapter to a port on an ATM switch. The green 'Link' 
-          LED on the front panel of the adapter will be on if the adapter is 
-          connected to the switch properly when the system is powered up.
-       e. Power on and boot the system.
-
-2. [ Removed ]
-
-3. Rebuild kernel with ABR support
-   [ a. and b. removed ]
-    c. Reconfigure the kernel, choose the Interphase ia driver through "make 
-       menuconfig" or "make xconfig".
-    d. Rebuild the kernel, loadable modules and the atm tools. 
-    e. Install the new built kernel and modules and reboot.
-
-4. Load the adapter hardware driver (ia driver) if it is built as a module
-       a. Login as root.
-       b. Change directory to /lib/modules/<kernel-version>/atm.
-       c. Run "insmod suni.o;insmod iphase.o"
-	  The yellow 'status' LED on the front panel of the adapter will blink 
-          while the driver is loaded in the system.
-       d. To verify that the 'ia' driver is loaded successfully, run the 
-          following command:
-
-              cat /proc/atm/devices
-
-          If the driver is loaded successfully, the output of the command will 
-          be similar to the following lines:
-
-              Itf Type    ESI/"MAC"addr AAL(TX,err,RX,err,drop) ...
-              0   ia      xxxxxxxxx  0 ( 0 0 0 0 0 )  5 ( 0 0 0 0 0 )
-
-          You can also check the system log file /var/log/messages for messages
-          related to the ATM driver.
-
-5. Ia Driver Configuration 
-
-5.1 Configuration of adapter buffers
-    The (i)Chip boards have 3 different packet RAM size variants: 128K, 512K and
-    1M. The RAM size decides the number of buffers and buffer size. The default 
-    size and number of buffers are set as following: 
-
-          Total    Rx RAM   Tx RAM   Rx Buf   Tx Buf   Rx buf   Tx buf
-         RAM size   size     size     size     size      cnt      cnt
-         --------  ------   ------   ------   ------   ------   ------
-           128K      64K      64K      10K      10K       6        6
-           512K     256K     256K      10K      10K      25       25
-             1M     512K     512K      10K      10K      51       51
-
-       These setting should work well in most environments, but can be
-       changed by typing the following command: 
- 
-           insmod <IA_DIR>/ia.o IA_RX_BUF=<RX_CNT> IA_RX_BUF_SZ=<RX_SIZE> \
-                   IA_TX_BUF=<TX_CNT> IA_TX_BUF_SZ=<TX_SIZE> 
-       Where:
-            RX_CNT = number of receive buffers in the range (1-128)
-            RX_SIZE = size of receive buffers in the range (48-64K)
-            TX_CNT = number of transmit buffers in the range (1-128)
-            TX_SIZE = size of transmit buffers in the range (48-64K)
-
-            1. Transmit and receive buffer size must be a multiple of 4.
-            2. Care should be taken so that the memory required for the
-               transmit and receive buffers is less than or equal to the
-               total adapter packet memory.   
-
-5.2 Turn on ia debug trace
-
-    When the ia driver is built with the CONFIG_ATM_IA_DEBUG flag, the driver 
-    can provide more debug trace if needed. There is a bit mask variable, 
-    IADebugFlag, which controls the output of the traces. You can find the bit 
-    map of the IADebugFlag in iphase.h. 
-    The debug trace can be turn on through the insmod command line option, for 
-    example, "insmod iphase.o IADebugFlag=0xffffffff" can turn on all the debug 
-    traces together with loading the driver.
-
-6. Ia Driver Test Using ttcp_atm and PVC
-
-   For the PVC setup, the test machines can either be connected back-to-back or 
-   through a switch. If connected through the switch, the switch must be 
-   configured for the PVC(s).
-
-   a. For UBR test:
-      At the test machine intended to receive data, type:
-         ttcp_atm -r -a -s 0.100 
-      At the other test machine, type:
-         ttcp_atm -t -a -s 0.100 -n 10000
-      Run "ttcp_atm -h" to display more options of the ttcp_atm tool.
-   b. For ABR test:
-      It is the same as the UBR testing, but with an extra command option:
-         -Pabr:max_pcr=<xxx>
-         where:
-             xxx = the maximum peak cell rate, from 170 - 353207.
-         This option must be set on both the machines.
-   c. For CBR test:
-      It is the same as the UBR testing, but with an extra command option:
-         -Pcbr:max_pcr=<xxx>
-         where:
-             xxx = the maximum peak cell rate, from 170 - 353207.
-         This option may only be set on the transmit machine.
-
-
-OUTSTANDING ISSUES
-------------------
-
-
-
-Contact Information
--------------------
-
-     Customer Support:
-         United States:	Telephone:	(214) 654-5555
-     			Fax:		(214) 654-5500
-			E-Mail:		intouch@iphase.com
-	 Europe:	Telephone:	33 (0)1 41 15 44 00
-			Fax:		33 (0)1 41 15 12 13
-     World Wide Web:	http://www.iphase.com
-     Anonymous FTP:	ftp.iphase.com
diff --git a/Documentation/networking/ipsec.rst b/Documentation/networking/ipsec.rst
new file mode 100644
index 000000000000..afe9d7b48be3
--- /dev/null
+++ b/Documentation/networking/ipsec.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====
+IPsec
+=====
+
+
+Here documents known IPsec corner cases which need to be keep in mind when
+deploy various IPsec configuration in real world production environment.
+
+1. IPcomp:
+	   Small IP packet won't get compressed at sender, and failed on
+	   policy check on receiver.
+
+Quote from RFC3173::
+
+  2.2. Non-Expansion Policy
+
+   If the total size of a compressed payload and the IPComp header, as
+   defined in section 3, is not smaller than the size of the original
+   payload, the IP datagram MUST be sent in the original non-compressed
+   form.  To clarify: If an IP datagram is sent non-compressed, no
+
+   IPComp header is added to the datagram.  This policy ensures saving
+   the decompression processing cycles and avoiding incurring IP
+   datagram fragmentation when the expanded datagram is larger than the
+   MTU.
+
+   Small IP datagrams are likely to expand as a result of compression.
+   Therefore, a numeric threshold should be applied before compression,
+   where IP datagrams of size smaller than the threshold are sent in the
+   original form without attempting compression.  The numeric threshold
+   is implementation dependent.
+
+Current IPComp implementation is indeed by the book, while as in practice
+when sending non-compressed packet to the peer (whether or not packet len
+is smaller than the threshold or the compressed len is larger than original
+packet len), the packet is dropped when checking the policy as this packet
+matches the selector but not coming from any XFRM layer, i.e., with no
+security path. Such naked packet will not eventually make it to upper layer.
+The result is much more wired to the user when ping peer with different
+payload length.
+
+One workaround is try to set "level use" for each policy if user observed
+above scenario. The consequence of doing so is small packet(uncompressed)
+will skip policy checking on receiver side.
diff --git a/Documentation/networking/ipsec.txt b/Documentation/networking/ipsec.txt
deleted file mode 100644
index ba794b7e51be..000000000000
--- a/Documentation/networking/ipsec.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-
-Here documents known IPsec corner cases which need to be keep in mind when
-deploy various IPsec configuration in real world production environment.
-
-1. IPcomp: Small IP packet won't get compressed at sender, and failed on
-	   policy check on receiver.
-
-Quote from RFC3173:
-2.2. Non-Expansion Policy
-
-   If the total size of a compressed payload and the IPComp header, as
-   defined in section 3, is not smaller than the size of the original
-   payload, the IP datagram MUST be sent in the original non-compressed
-   form.  To clarify: If an IP datagram is sent non-compressed, no
-
-   IPComp header is added to the datagram.  This policy ensures saving
-   the decompression processing cycles and avoiding incurring IP
-   datagram fragmentation when the expanded datagram is larger than the
-   MTU.
-
-   Small IP datagrams are likely to expand as a result of compression.
-   Therefore, a numeric threshold should be applied before compression,
-   where IP datagrams of size smaller than the threshold are sent in the
-   original form without attempting compression.  The numeric threshold
-   is implementation dependent.
-
-Current IPComp implementation is indeed by the book, while as in practice
-when sending non-compressed packet to the peer (whether or not packet len
-is smaller than the threshold or the compressed len is larger than original
-packet len), the packet is dropped when checking the policy as this packet
-matches the selector but not coming from any XFRM layer, i.e., with no
-security path. Such naked packet will not eventually make it to upper layer.
-The result is much more wired to the user when ping peer with different
-payload length.
-
-One workaround is try to set "level use" for each policy if user observed
-above scenario. The consequence of doing so is small packet(uncompressed)
-will skip policy checking on receiver side.
diff --git a/Documentation/networking/ipv6.rst b/Documentation/networking/ipv6.rst
new file mode 100644
index 000000000000..ba09c2f2dcc7
--- /dev/null
+++ b/Documentation/networking/ipv6.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+IPv6
+====
+
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either
+``/etc/modules.d/*.conf`` configuration files, or in a distro-specific
+configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+	Specifies whether to load the IPv6 module, but disable all
+	its functionality.  This might be used when another module
+	has a dependency on the IPv6 module being loaded, but no
+	IPv6 addresses or operations are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled.
+
+		No IPv6 addresses will be added to interfaces, and
+		it will not be possible to open an IPv6 socket.
+
+		A reboot is required to enable IPv6.
+
+autoconf
+
+	Specifies whether to enable IPv6 address autoconfiguration
+	on all interfaces.  This might be used when one does not wish
+	for addresses to be automatically generated from prefixes
+	received in Router Advertisements.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 address autoconfiguration is disabled on all interfaces.
+
+		Only the IPv6 loopback address (::1) and link-local addresses
+		will be added to interfaces.
+
+	1
+		IPv6 address autoconfiguration is enabled on all interfaces.
+
+		This is the default value.
+
+disable_ipv6
+
+	Specifies whether to disable IPv6 on all interfaces.
+	This might be used when no IPv6 addresses are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled on all interfaces.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled on all interfaces.
+
+		No IPv6 addresses will be added to interfaces.
+
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
deleted file mode 100644
index 6cd74fa55358..000000000000
--- a/Documentation/networking/ipv6.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-
-Options for the ipv6 module are supplied as parameters at load time.
-
-Module options may be given as command line arguments to the insmod
-or modprobe command, but are usually specified in either
-/etc/modules.d/*.conf configuration files, or in a distro-specific
-configuration file.
-
-The available ipv6 module parameters are listed below.  If a parameter
-is not specified the default value is used.
-
-The parameters are as follows:
-
-disable
-
-	Specifies whether to load the IPv6 module, but disable all
-	its functionality.  This might be used when another module
-	has a dependency on the IPv6 module being loaded, but no
-	IPv6 addresses or operations are desired.
-
-	The possible values and their effects are:
-
-	0
-		IPv6 is enabled.
-
-		This is the default value.
-
-	1
-		IPv6 is disabled.
-
-		No IPv6 addresses will be added to interfaces, and
-		it will not be possible to open an IPv6 socket.
-
-		A reboot is required to enable IPv6.
-
-autoconf
-
-	Specifies whether to enable IPv6 address autoconfiguration
-	on all interfaces.  This might be used when one does not wish
-	for addresses to be automatically generated from prefixes
-	received in Router Advertisements.
-
-	The possible values and their effects are:
-
-	0
-		IPv6 address autoconfiguration is disabled on all interfaces.
-
-		Only the IPv6 loopback address (::1) and link-local addresses
-		will be added to interfaces.
-
-	1
-		IPv6 address autoconfiguration is enabled on all interfaces.
-
-		This is the default value.
-
-disable_ipv6
-
-	Specifies whether to disable IPv6 on all interfaces.
-	This might be used when no IPv6 addresses are desired.
-
-	The possible values and their effects are:
-
-	0
-		IPv6 is enabled on all interfaces.
-
-		This is the default value.
-
-	1
-		IPv6 is disabled on all interfaces.
-
-		No IPv6 addresses will be added to interfaces.
-
diff --git a/Documentation/networking/ipvlan.rst b/Documentation/networking/ipvlan.rst
new file mode 100644
index 000000000000..694adcba36b0
--- /dev/null
+++ b/Documentation/networking/ipvlan.rst
@@ -0,0 +1,189 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+IPVLAN Driver HOWTO
+===================
+
+Initial Release:
+	Mahesh Bandewar <maheshb AT google.com>
+
+1. Introduction:
+================
+This is conceptually very similar to the macvlan driver with one major
+exception of using L3 for mux-ing /demux-ing among slaves. This property makes
+the master device share the L2 with it's slave devices. I have developed this
+driver in conjunction with network namespaces and not sure if there is use case
+outside of it.
+
+
+2. Building and Installation:
+=============================
+
+In order to build the driver, please select the config item CONFIG_IPVLAN.
+The driver can be built into the kernel (CONFIG_IPVLAN=y) or as a module
+(CONFIG_IPVLAN=m).
+
+
+3. Configuration:
+=================
+
+There are no module parameters for this driver and it can be configured
+using IProute2/ip utility.
+::
+
+    ip link add link <master> name <slave> type ipvlan [ mode MODE ] [ FLAGS ]
+       where
+	 MODE: l3 (default) | l3s | l2
+	 FLAGS: bridge (default) | private | vepa
+
+e.g.
+
+    (a) Following will create IPvlan link with eth0 as master in
+	L3 bridge mode::
+
+	  bash# ip link add link eth0 name ipvl0 type ipvlan
+    (b) This command will create IPvlan link in L2 bridge mode::
+
+	  bash# ip link add link eth0 name ipvl0 type ipvlan mode l2 bridge
+
+    (c) This command will create an IPvlan device in L2 private mode::
+
+	  bash# ip link add link eth0 name ipvlan type ipvlan mode l2 private
+
+    (d) This command will create an IPvlan device in L2 vepa mode::
+
+	  bash# ip link add link eth0 name ipvlan type ipvlan mode l2 vepa
+
+
+4. Operating modes:
+===================
+
+IPvlan has two modes of operation - L2 and L3. For a given master device,
+you can select one of these two modes and all slaves on that master will
+operate in the same (selected) mode. The RX mode is almost identical except
+that in L3 mode the slaves wont receive any multicast / broadcast traffic.
+L3 mode is more restrictive since routing is controlled from the other (mostly)
+default namespace.
+
+4.1 L2 mode:
+------------
+
+In this mode TX processing happens on the stack instance attached to the
+slave device and packets are switched and queued to the master device to send
+out. In this mode the slaves will RX/TX multicast and broadcast (if applicable)
+as well.
+
+4.2 L3 mode:
+------------
+
+In this mode TX processing up to L3 happens on the stack instance attached
+to the slave device and packets are switched to the stack instance of the
+master device for the L2 processing and routing from that instance will be
+used before packets are queued on the outbound device. In this mode the slaves
+will not receive nor can send multicast / broadcast traffic.
+
+4.3 L3S mode:
+-------------
+
+This is very similar to the L3 mode except that iptables (conn-tracking)
+works in this mode and hence it is L3-symmetric (L3s). This will have slightly less
+performance but that shouldn't matter since you are choosing this mode over plain-L3
+mode to make conn-tracking work.
+
+5. Mode flags:
+==============
+
+At this time following mode flags are available
+
+5.1 bridge:
+-----------
+This is the default option. To configure the IPvlan port in this mode,
+user can choose to either add this option on the command-line or don't specify
+anything. This is the traditional mode where slaves can cross-talk among
+themselves apart from talking through the master device.
+
+5.2 private:
+------------
+If this option is added to the command-line, the port is set in private
+mode. i.e. port won't allow cross communication between slaves.
+
+5.3 vepa:
+---------
+If this is added to the command-line, the port is set in VEPA mode.
+i.e. port will offload switching functionality to the external entity as
+described in 802.1Qbg
+Note: VEPA mode in IPvlan has limitations. IPvlan uses the mac-address of the
+master-device, so the packets which are emitted in this mode for the adjacent
+neighbor will have source and destination mac same. This will make the switch /
+router send the redirect message.
+
+6. What to choose (macvlan vs. ipvlan)?
+=======================================
+
+These two devices are very similar in many regards and the specific use
+case could very well define which device to choose. if one of the following
+situations defines your use case then you can choose to use ipvlan:
+
+
+(a) The Linux host that is connected to the external switch / router has
+    policy configured that allows only one mac per port.
+(b) No of virtual devices created on a master exceed the mac capacity and
+    puts the NIC in promiscuous mode and degraded performance is a concern.
+(c) If the slave device is to be put into the hostile / untrusted network
+    namespace where L2 on the slave could be changed / misused.
+
+
+6. Example configuration:
+=========================
+
+::
+
+  +=============================================================+
+  |  Host: host1                                                |
+  |                                                             |
+  |   +----------------------+      +----------------------+    |
+  |   |   NS:ns0             |      |  NS:ns1              |    |
+  |   |                      |      |                      |    |
+  |   |                      |      |                      |    |
+  |   |        ipvl0         |      |         ipvl1        |    |
+  |   +----------#-----------+      +-----------#----------+    |
+  |              #                              #               |
+  |              ################################               |
+  |                              # eth0                         |
+  +==============================#==============================+
+
+
+(a) Create two network namespaces - ns0, ns1::
+
+	ip netns add ns0
+	ip netns add ns1
+
+(b) Create two ipvlan slaves on eth0 (master device)::
+
+	ip link add link eth0 ipvl0 type ipvlan mode l2
+	ip link add link eth0 ipvl1 type ipvlan mode l2
+
+(c) Assign slaves to the respective network namespaces::
+
+	ip link set dev ipvl0 netns ns0
+	ip link set dev ipvl1 netns ns1
+
+(d) Now switch to the namespace (ns0 or ns1) to configure the slave devices
+
+	- For ns0::
+
+		(1) ip netns exec ns0 bash
+		(2) ip link set dev ipvl0 up
+		(3) ip link set dev lo up
+		(4) ip -4 addr add 127.0.0.1 dev lo
+		(5) ip -4 addr add $IPADDR dev ipvl0
+		(6) ip -4 route add default via $ROUTER dev ipvl0
+
+	- For ns1::
+
+		(1) ip netns exec ns1 bash
+		(2) ip link set dev ipvl1 up
+		(3) ip link set dev lo up
+		(4) ip -4 addr add 127.0.0.1 dev lo
+		(5) ip -4 addr add $IPADDR dev ipvl1
+		(6) ip -4 route add default via $ROUTER dev ipvl1
diff --git a/Documentation/networking/ipvlan.txt b/Documentation/networking/ipvlan.txt
deleted file mode 100644
index 27a38e50c287..000000000000
--- a/Documentation/networking/ipvlan.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-
-                            IPVLAN Driver HOWTO
-
-Initial Release:
-	Mahesh Bandewar <maheshb AT google.com>
-
-1. Introduction:
-	This is conceptually very similar to the macvlan driver with one major
-exception of using L3 for mux-ing /demux-ing among slaves. This property makes
-the master device share the L2 with it's slave devices. I have developed this
-driver in conjunction with network namespaces and not sure if there is use case
-outside of it.
-
-
-2. Building and Installation:
-	In order to build the driver, please select the config item CONFIG_IPVLAN.
-The driver can be built into the kernel (CONFIG_IPVLAN=y) or as a module
-(CONFIG_IPVLAN=m).
-
-
-3. Configuration:
-	There are no module parameters for this driver and it can be configured
-using IProute2/ip utility.
-
-    ip link add link <master> name <slave> type ipvlan [ mode MODE ] [ FLAGS ]
-       where
-         MODE: l3 (default) | l3s | l2
-         FLAGS: bridge (default) | private | vepa
-
-    e.g.
-    (a) Following will create IPvlan link with eth0 as master in
-        L3 bridge mode
-          bash# ip link add link eth0 name ipvl0 type ipvlan
-    (b) This command will create IPvlan link in L2 bridge mode.
-          bash# ip link add link eth0 name ipvl0 type ipvlan mode l2 bridge
-    (c) This command will create an IPvlan device in L2 private mode.
-          bash# ip link add link eth0 name ipvlan type ipvlan mode l2 private
-    (d) This command will create an IPvlan device in L2 vepa mode.
-          bash# ip link add link eth0 name ipvlan type ipvlan mode l2 vepa
-
-
-4. Operating modes:
-	IPvlan has two modes of operation - L2 and L3. For a given master device,
-you can select one of these two modes and all slaves on that master will
-operate in the same (selected) mode. The RX mode is almost identical except
-that in L3 mode the slaves wont receive any multicast / broadcast traffic.
-L3 mode is more restrictive since routing is controlled from the other (mostly)
-default namespace.
-
-4.1 L2 mode:
-	In this mode TX processing happens on the stack instance attached to the
-slave device and packets are switched and queued to the master device to send
-out. In this mode the slaves will RX/TX multicast and broadcast (if applicable)
-as well.
-
-4.2 L3 mode:
-	In this mode TX processing up to L3 happens on the stack instance attached
-to the slave device and packets are switched to the stack instance of the
-master device for the L2 processing and routing from that instance will be
-used before packets are queued on the outbound device. In this mode the slaves
-will not receive nor can send multicast / broadcast traffic.
-
-4.3 L3S mode:
-	This is very similar to the L3 mode except that iptables (conn-tracking)
-works in this mode and hence it is L3-symmetric (L3s). This will have slightly less
-performance but that shouldn't matter since you are choosing this mode over plain-L3
-mode to make conn-tracking work.
-
-5. Mode flags:
-	At this time following mode flags are available
-
-5.1 bridge:
-	This is the default option. To configure the IPvlan port in this mode,
-user can choose to either add this option on the command-line or don't specify
-anything. This is the traditional mode where slaves can cross-talk among
-themselves apart from talking through the master device.
-
-5.2 private:
-	If this option is added to the command-line, the port is set in private
-mode. i.e. port won't allow cross communication between slaves.
-
-5.3 vepa:
-	If this is added to the command-line, the port is set in VEPA mode.
-i.e. port will offload switching functionality to the external entity as
-described in 802.1Qbg
-Note: VEPA mode in IPvlan has limitations. IPvlan uses the mac-address of the
-master-device, so the packets which are emitted in this mode for the adjacent
-neighbor will have source and destination mac same. This will make the switch /
-router send the redirect message.
-
-6. What to choose (macvlan vs. ipvlan)?
-	These two devices are very similar in many regards and the specific use
-case could very well define which device to choose. if one of the following
-situations defines your use case then you can choose to use ipvlan -
-	(a) The Linux host that is connected to the external switch / router has
-policy configured that allows only one mac per port.
-	(b) No of virtual devices created on a master exceed the mac capacity and
-puts the NIC in promiscuous mode and degraded performance is a concern.
-	(c) If the slave device is to be put into the hostile / untrusted network
-namespace where L2 on the slave could be changed / misused.
-
-
-6. Example configuration:
-
-  +=============================================================+
-  |  Host: host1                                                |
-  |                                                             |
-  |   +----------------------+      +----------------------+    |
-  |   |   NS:ns0             |      |  NS:ns1              |    |
-  |   |                      |      |                      |    |
-  |   |                      |      |                      |    |
-  |   |        ipvl0         |      |         ipvl1        |    |
-  |   +----------#-----------+      +-----------#----------+    |
-  |              #                              #               |
-  |              ################################               |
-  |                              # eth0                         |
-  +==============================#==============================+
-
-
-	(a) Create two network namespaces - ns0, ns1
-		ip netns add ns0
-		ip netns add ns1
-
-	(b) Create two ipvlan slaves on eth0 (master device)
-		ip link add link eth0 ipvl0 type ipvlan mode l2
-		ip link add link eth0 ipvl1 type ipvlan mode l2
-
-	(c) Assign slaves to the respective network namespaces
-		ip link set dev ipvl0 netns ns0
-		ip link set dev ipvl1 netns ns1
-
-	(d) Now switch to the namespace (ns0 or ns1) to configure the slave devices
-		- For ns0
-			(1) ip netns exec ns0 bash
-			(2) ip link set dev ipvl0 up
-			(3) ip link set dev lo up
-			(4) ip -4 addr add 127.0.0.1 dev lo
-			(5) ip -4 addr add $IPADDR dev ipvl0
-			(6) ip -4 route add default via $ROUTER dev ipvl0
-		- For ns1
-			(1) ip netns exec ns1 bash
-			(2) ip link set dev ipvl1 up
-			(3) ip link set dev lo up
-			(4) ip -4 addr add 127.0.0.1 dev lo
-			(5) ip -4 addr add $IPADDR dev ipvl1
-			(6) ip -4 route add default via $ROUTER dev ipvl1
diff --git a/Documentation/networking/ipvs-sysctl.rst b/Documentation/networking/ipvs-sysctl.rst
new file mode 100644
index 000000000000..be36c4600e8f
--- /dev/null
+++ b/Documentation/networking/ipvs-sysctl.rst
@@ -0,0 +1,302 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========
+IPvs-sysctl
+===========
+
+/proc/sys/net/ipv4/vs/* Variables:
+==================================
+
+am_droprate - INTEGER
+	default 10
+
+	It sets the always mode drop rate, which is used in the mode 3
+	of the drop_rate defense.
+
+amemthresh - INTEGER
+	default 1024
+
+	It sets the available memory threshold (in pages), which is
+	used in the automatic modes of defense. When there is no
+	enough available memory, the respective strategy will be
+	enabled and the variable is automatically set to 2, otherwise
+	the strategy is disabled and the variable is  set  to 1.
+
+backup_only - BOOLEAN
+	- 0 - disabled (default)
+	- not 0 - enabled
+
+	If set, disable the director function while the server is
+	in backup mode to avoid packet loops for DR/TUN methods.
+
+conn_reuse_mode - INTEGER
+	1 - default
+
+	Controls how ipvs will deal with connections that are detected
+	port reuse. It is a bitmap, with the values being:
+
+	0: disable any special handling on port reuse. The new
+	connection will be delivered to the same real server that was
+	servicing the previous connection. This will effectively
+	disable expire_nodest_conn.
+
+	bit 1: enable rescheduling of new connections when it is safe.
+	That is, whenever expire_nodest_conn and for TCP sockets, when
+	the connection is in TIME_WAIT state (which is only possible if
+	you use NAT mode).
+
+	bit 2: it is bit 1 plus, for TCP connections, when connections
+	are in FIN_WAIT state, as this is the last state seen by load
+	balancer in Direct Routing mode. This bit helps on adding new
+	real servers to a very busy cluster.
+
+conntrack - BOOLEAN
+	- 0 - disabled (default)
+	- not 0 - enabled
+
+	If set, maintain connection tracking entries for
+	connections handled by IPVS.
+
+	This should be enabled if connections handled by IPVS are to be
+	also handled by stateful firewall rules. That is, iptables rules
+	that make use of connection tracking.  It is a performance
+	optimisation to disable this setting otherwise.
+
+	Connections handled by the IPVS FTP application module
+	will have connection tracking entries regardless of this setting.
+
+	Only available when IPVS is compiled with CONFIG_IP_VS_NFCT enabled.
+
+cache_bypass - BOOLEAN
+	- 0 - disabled (default)
+	- not 0 - enabled
+
+	If it is enabled, forward packets to the original destination
+	directly when no cache server is available and destination
+	address is not local (iph->daddr is RTN_UNICAST). It is mostly
+	used in transparent web cache cluster.
+
+debug_level - INTEGER
+	- 0          - transmission error messages (default)
+	- 1          - non-fatal error messages
+	- 2          - configuration
+	- 3          - destination trash
+	- 4          - drop entry
+	- 5          - service lookup
+	- 6          - scheduling
+	- 7          - connection new/expire, lookup and synchronization
+	- 8          - state transition
+	- 9          - binding destination, template checks and applications
+	- 10         - IPVS packet transmission
+	- 11         - IPVS packet handling (ip_vs_in/ip_vs_out)
+	- 12 or more - packet traversal
+
+	Only available when IPVS is compiled with CONFIG_IP_VS_DEBUG enabled.
+
+	Higher debugging levels include the messages for lower debugging
+	levels, so setting debug level 2, includes level 0, 1 and 2
+	messages. Thus, logging becomes more and more verbose the higher
+	the level.
+
+drop_entry - INTEGER
+	- 0  - disabled (default)
+
+	The drop_entry defense is to randomly drop entries in the
+	connection hash table, just in order to collect back some
+	memory for new connections. In the current code, the
+	drop_entry procedure can be activated every second, then it
+	randomly scans 1/32 of the whole and drops entries that are in
+	the SYN-RECV/SYNACK state, which should be effective against
+	syn-flooding attack.
+
+	The valid values of drop_entry are from 0 to 3, where 0 means
+	that this strategy is always disabled, 1 and 2 mean automatic
+	modes (when there is no enough available memory, the strategy
+	is enabled and the variable is automatically set to 2,
+	otherwise the strategy is disabled and the variable is set to
+	1), and 3 means that that the strategy is always enabled.
+
+drop_packet - INTEGER
+	- 0  - disabled (default)
+
+	The drop_packet defense is designed to drop 1/rate packets
+	before forwarding them to real servers. If the rate is 1, then
+	drop all the incoming packets.
+
+	The value definition is the same as that of the drop_entry. In
+	the automatic mode, the rate is determined by the follow
+	formula: rate = amemthresh / (amemthresh - available_memory)
+	when available memory is less than the available memory
+	threshold. When the mode 3 is set, the always mode drop rate
+	is controlled by the /proc/sys/net/ipv4/vs/am_droprate.
+
+expire_nodest_conn - BOOLEAN
+	- 0 - disabled (default)
+	- not 0 - enabled
+
+	The default value is 0, the load balancer will silently drop
+	packets when its destination server is not available. It may
+	be useful, when user-space monitoring program deletes the
+	destination server (because of server overload or wrong
+	detection) and add back the server later, and the connections
+	to the server can continue.
+
+	If this feature is enabled, the load balancer will expire the
+	connection immediately when a packet arrives and its
+	destination server is not available, then the client program
+	will be notified that the connection is closed. This is
+	equivalent to the feature some people requires to flush
+	connections when its destination is not available.
+
+expire_quiescent_template - BOOLEAN
+	- 0 - disabled (default)
+	- not 0 - enabled
+
+	When set to a non-zero value, the load balancer will expire
+	persistent templates when the destination server is quiescent.
+	This may be useful, when a user makes a destination server
+	quiescent by setting its weight to 0 and it is desired that
+	subsequent otherwise persistent connections are sent to a
+	different destination server.  By default new persistent
+	connections are allowed to quiescent destination servers.
+
+	If this feature is enabled, the load balancer will expire the
+	persistence template if it is to be used to schedule a new
+	connection and the destination server is quiescent.
+
+ignore_tunneled - BOOLEAN
+	- 0 - disabled (default)
+	- not 0 - enabled
+
+	If set, ipvs will set the ipvs_property on all packets which are of
+	unrecognized protocols.  This prevents us from routing tunneled
+	protocols like ipip, which is useful to prevent rescheduling
+	packets that have been tunneled to the ipvs host (i.e. to prevent
+	ipvs routing loops when ipvs is also acting as a real server).
+
+nat_icmp_send - BOOLEAN
+	- 0 - disabled (default)
+	- not 0 - enabled
+
+	It controls sending icmp error messages (ICMP_DEST_UNREACH)
+	for VS/NAT when the load balancer receives packets from real
+	servers but the connection entries don't exist.
+
+pmtu_disc - BOOLEAN
+	- 0 - disabled
+	- not 0 - enabled (default)
+
+	By default, reject with FRAG_NEEDED all DF packets that exceed
+	the PMTU, irrespective of the forwarding method. For TUN method
+	the flag can be disabled to fragment such packets.
+
+secure_tcp - INTEGER
+	- 0  - disabled (default)
+
+	The secure_tcp defense is to use a more complicated TCP state
+	transition table. For VS/NAT, it also delays entering the
+	TCP ESTABLISHED state until the three way handshake is completed.
+
+	The value definition is the same as that of drop_entry and
+	drop_packet.
+
+sync_threshold - vector of 2 INTEGERs: sync_threshold, sync_period
+	default 3 50
+
+	It sets synchronization threshold, which is the minimum number
+	of incoming packets that a connection needs to receive before
+	the connection will be synchronized. A connection will be
+	synchronized, every time the number of its incoming packets
+	modulus sync_period equals the threshold. The range of the
+	threshold is from 0 to sync_period.
+
+	When sync_period and sync_refresh_period are 0, send sync only
+	for state changes or only once when pkts matches sync_threshold
+
+sync_refresh_period - UNSIGNED INTEGER
+	default 0
+
+	In seconds, difference in reported connection timer that triggers
+	new sync message. It can be used to avoid sync messages for the
+	specified period (or half of the connection timeout if it is lower)
+	if connection state is not changed since last sync.
+
+	This is useful for normal connections with high traffic to reduce
+	sync rate. Additionally, retry sync_retries times with period of
+	sync_refresh_period/8.
+
+sync_retries - INTEGER
+	default 0
+
+	Defines sync retries with period of sync_refresh_period/8. Useful
+	to protect against loss of sync messages. The range of the
+	sync_retries is from 0 to 3.
+
+sync_qlen_max - UNSIGNED LONG
+
+	Hard limit for queued sync messages that are not sent yet. It
+	defaults to 1/32 of the memory pages but actually represents
+	number of messages. It will protect us from allocating large
+	parts of memory when the sending rate is lower than the queuing
+	rate.
+
+sync_sock_size - INTEGER
+	default 0
+
+	Configuration of SNDBUF (master) or RCVBUF (slave) socket limit.
+	Default value is 0 (preserve system defaults).
+
+sync_ports - INTEGER
+	default 1
+
+	The number of threads that master and backup servers can use for
+	sync traffic. Every thread will use single UDP port, thread 0 will
+	use the default port 8848 while last thread will use port
+	8848+sync_ports-1.
+
+snat_reroute - BOOLEAN
+	- 0 - disabled
+	- not 0 - enabled (default)
+
+	If enabled, recalculate the route of SNATed packets from
+	realservers so that they are routed as if they originate from the
+	director. Otherwise they are routed as if they are forwarded by the
+	director.
+
+	If policy routing is in effect then it is possible that the route
+	of a packet originating from a director is routed differently to a
+	packet being forwarded by the director.
+
+	If policy routing is not in effect then the recalculated route will
+	always be the same as the original route so it is an optimisation
+	to disable snat_reroute and avoid the recalculation.
+
+sync_persist_mode - INTEGER
+	default 0
+
+	Controls the synchronisation of connections when using persistence
+
+	0: All types of connections are synchronised
+
+	1: Attempt to reduce the synchronisation traffic depending on
+	the connection type. For persistent services avoid synchronisation
+	for normal connections, do it only for persistence templates.
+	In such case, for TCP and SCTP it may need enabling sloppy_tcp and
+	sloppy_sctp flags on backup servers. For non-persistent services
+	such optimization is not applied, mode 0 is assumed.
+
+sync_version - INTEGER
+	default 1
+
+	The version of the synchronisation protocol used when sending
+	synchronisation messages.
+
+	0 selects the original synchronisation protocol (version 0). This
+	should be used when sending synchronisation messages to a legacy
+	system that only understands the original synchronisation protocol.
+
+	1 selects the current synchronisation protocol (version 1). This
+	should be used where possible.
+
+	Kernels with this sync_version entry are able to receive messages
+	of both version 1 and version 2 of the synchronisation protocol.
diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt
deleted file mode 100644
index 056898685d40..000000000000
--- a/Documentation/networking/ipvs-sysctl.txt
+++ /dev/null
@@ -1,294 +0,0 @@
-/proc/sys/net/ipv4/vs/* Variables:
-
-am_droprate - INTEGER
-        default 10
-
-        It sets the always mode drop rate, which is used in the mode 3
-        of the drop_rate defense.
-
-amemthresh - INTEGER
-        default 1024
-
-        It sets the available memory threshold (in pages), which is
-        used in the automatic modes of defense. When there is no
-        enough available memory, the respective strategy will be
-        enabled and the variable is automatically set to 2, otherwise
-        the strategy is disabled and the variable is  set  to 1.
-
-backup_only - BOOLEAN
-	0 - disabled (default)
-	not 0 - enabled
-
-	If set, disable the director function while the server is
-	in backup mode to avoid packet loops for DR/TUN methods.
-
-conn_reuse_mode - INTEGER
-	1 - default
-
-	Controls how ipvs will deal with connections that are detected
-	port reuse. It is a bitmap, with the values being:
-
-	0: disable any special handling on port reuse. The new
-	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
-
-	bit 1: enable rescheduling of new connections when it is safe.
-	That is, whenever expire_nodest_conn and for TCP sockets, when
-	the connection is in TIME_WAIT state (which is only possible if
-	you use NAT mode).
-
-	bit 2: it is bit 1 plus, for TCP connections, when connections
-	are in FIN_WAIT state, as this is the last state seen by load
-	balancer in Direct Routing mode. This bit helps on adding new
-	real servers to a very busy cluster.
-
-conntrack - BOOLEAN
-	0 - disabled (default)
-	not 0 - enabled
-
-	If set, maintain connection tracking entries for
-	connections handled by IPVS.
-
-	This should be enabled if connections handled by IPVS are to be
-	also handled by stateful firewall rules. That is, iptables rules
-	that make use of connection tracking.  It is a performance
-	optimisation to disable this setting otherwise.
-
-	Connections handled by the IPVS FTP application module
-	will have connection tracking entries regardless of this setting.
-
-	Only available when IPVS is compiled with CONFIG_IP_VS_NFCT enabled.
-
-cache_bypass - BOOLEAN
-        0 - disabled (default)
-        not 0 - enabled
-
-        If it is enabled, forward packets to the original destination
-        directly when no cache server is available and destination
-        address is not local (iph->daddr is RTN_UNICAST). It is mostly
-        used in transparent web cache cluster.
-
-debug_level - INTEGER
-	0          - transmission error messages (default)
-	1          - non-fatal error messages
-	2          - configuration
-	3          - destination trash
-	4          - drop entry
-	5          - service lookup
-	6          - scheduling
-	7          - connection new/expire, lookup and synchronization
-	8          - state transition
-	9          - binding destination, template checks and applications
-	10         - IPVS packet transmission
-	11         - IPVS packet handling (ip_vs_in/ip_vs_out)
-	12 or more - packet traversal
-
-	Only available when IPVS is compiled with CONFIG_IP_VS_DEBUG enabled.
-
-	Higher debugging levels include the messages for lower debugging
-	levels, so setting debug level 2, includes level 0, 1 and 2
-	messages. Thus, logging becomes more and more verbose the higher
-	the level.
-
-drop_entry - INTEGER
-        0  - disabled (default)
-
-        The drop_entry defense is to randomly drop entries in the
-        connection hash table, just in order to collect back some
-        memory for new connections. In the current code, the
-        drop_entry procedure can be activated every second, then it
-        randomly scans 1/32 of the whole and drops entries that are in
-        the SYN-RECV/SYNACK state, which should be effective against
-        syn-flooding attack.
-
-        The valid values of drop_entry are from 0 to 3, where 0 means
-        that this strategy is always disabled, 1 and 2 mean automatic
-        modes (when there is no enough available memory, the strategy
-        is enabled and the variable is automatically set to 2,
-        otherwise the strategy is disabled and the variable is set to
-        1), and 3 means that that the strategy is always enabled.
-
-drop_packet - INTEGER
-        0  - disabled (default)
-
-        The drop_packet defense is designed to drop 1/rate packets
-        before forwarding them to real servers. If the rate is 1, then
-        drop all the incoming packets.
-
-        The value definition is the same as that of the drop_entry. In
-        the automatic mode, the rate is determined by the follow
-        formula: rate = amemthresh / (amemthresh - available_memory)
-        when available memory is less than the available memory
-        threshold. When the mode 3 is set, the always mode drop rate
-        is controlled by the /proc/sys/net/ipv4/vs/am_droprate.
-
-expire_nodest_conn - BOOLEAN
-        0 - disabled (default)
-        not 0 - enabled
-
-        The default value is 0, the load balancer will silently drop
-        packets when its destination server is not available. It may
-        be useful, when user-space monitoring program deletes the
-        destination server (because of server overload or wrong
-        detection) and add back the server later, and the connections
-        to the server can continue.
-
-        If this feature is enabled, the load balancer will expire the
-        connection immediately when a packet arrives and its
-        destination server is not available, then the client program
-        will be notified that the connection is closed. This is
-        equivalent to the feature some people requires to flush
-        connections when its destination is not available.
-
-expire_quiescent_template - BOOLEAN
-	0 - disabled (default)
-	not 0 - enabled
-
-	When set to a non-zero value, the load balancer will expire
-	persistent templates when the destination server is quiescent.
-	This may be useful, when a user makes a destination server
-	quiescent by setting its weight to 0 and it is desired that
-	subsequent otherwise persistent connections are sent to a
-	different destination server.  By default new persistent
-	connections are allowed to quiescent destination servers.
-
-	If this feature is enabled, the load balancer will expire the
-	persistence template if it is to be used to schedule a new
-	connection and the destination server is quiescent.
-
-ignore_tunneled - BOOLEAN
-	0 - disabled (default)
-	not 0 - enabled
-
-	If set, ipvs will set the ipvs_property on all packets which are of
-	unrecognized protocols.  This prevents us from routing tunneled
-	protocols like ipip, which is useful to prevent rescheduling
-	packets that have been tunneled to the ipvs host (i.e. to prevent
-	ipvs routing loops when ipvs is also acting as a real server).
-
-nat_icmp_send - BOOLEAN
-        0 - disabled (default)
-        not 0 - enabled
-
-        It controls sending icmp error messages (ICMP_DEST_UNREACH)
-        for VS/NAT when the load balancer receives packets from real
-        servers but the connection entries don't exist.
-
-pmtu_disc - BOOLEAN
-	0 - disabled
-	not 0 - enabled (default)
-
-	By default, reject with FRAG_NEEDED all DF packets that exceed
-	the PMTU, irrespective of the forwarding method. For TUN method
-	the flag can be disabled to fragment such packets.
-
-secure_tcp - INTEGER
-        0  - disabled (default)
-
-	The secure_tcp defense is to use a more complicated TCP state
-	transition table. For VS/NAT, it also delays entering the
-	TCP ESTABLISHED state until the three way handshake is completed.
-
-        The value definition is the same as that of drop_entry and
-        drop_packet.
-
-sync_threshold - vector of 2 INTEGERs: sync_threshold, sync_period
-	default 3 50
-
-	It sets synchronization threshold, which is the minimum number
-	of incoming packets that a connection needs to receive before
-	the connection will be synchronized. A connection will be
-	synchronized, every time the number of its incoming packets
-	modulus sync_period equals the threshold. The range of the
-	threshold is from 0 to sync_period.
-
-	When sync_period and sync_refresh_period are 0, send sync only
-	for state changes or only once when pkts matches sync_threshold
-
-sync_refresh_period - UNSIGNED INTEGER
-	default 0
-
-	In seconds, difference in reported connection timer that triggers
-	new sync message. It can be used to avoid sync messages for the
-	specified period (or half of the connection timeout if it is lower)
-	if connection state is not changed since last sync.
-
-	This is useful for normal connections with high traffic to reduce
-	sync rate. Additionally, retry sync_retries times with period of
-	sync_refresh_period/8.
-
-sync_retries - INTEGER
-	default 0
-
-	Defines sync retries with period of sync_refresh_period/8. Useful
-	to protect against loss of sync messages. The range of the
-	sync_retries is from 0 to 3.
-
-sync_qlen_max - UNSIGNED LONG
-
-	Hard limit for queued sync messages that are not sent yet. It
-	defaults to 1/32 of the memory pages but actually represents
-	number of messages. It will protect us from allocating large
-	parts of memory when the sending rate is lower than the queuing
-	rate.
-
-sync_sock_size - INTEGER
-	default 0
-
-	Configuration of SNDBUF (master) or RCVBUF (slave) socket limit.
-	Default value is 0 (preserve system defaults).
-
-sync_ports - INTEGER
-	default 1
-
-	The number of threads that master and backup servers can use for
-	sync traffic. Every thread will use single UDP port, thread 0 will
-	use the default port 8848 while last thread will use port
-	8848+sync_ports-1.
-
-snat_reroute - BOOLEAN
-	0 - disabled
-	not 0 - enabled (default)
-
-	If enabled, recalculate the route of SNATed packets from
-	realservers so that they are routed as if they originate from the
-	director. Otherwise they are routed as if they are forwarded by the
-	director.
-
-	If policy routing is in effect then it is possible that the route
-	of a packet originating from a director is routed differently to a
-	packet being forwarded by the director.
-
-	If policy routing is not in effect then the recalculated route will
-	always be the same as the original route so it is an optimisation
-	to disable snat_reroute and avoid the recalculation.
-
-sync_persist_mode - INTEGER
-	default 0
-
-	Controls the synchronisation of connections when using persistence
-
-	0: All types of connections are synchronised
-	1: Attempt to reduce the synchronisation traffic depending on
-	the connection type. For persistent services avoid synchronisation
-	for normal connections, do it only for persistence templates.
-	In such case, for TCP and SCTP it may need enabling sloppy_tcp and
-	sloppy_sctp flags on backup servers. For non-persistent services
-	such optimization is not applied, mode 0 is assumed.
-
-sync_version - INTEGER
-	default 1
-
-	The version of the synchronisation protocol used when sending
-	synchronisation messages.
-
-	0 selects the original synchronisation protocol (version 0). This
-	should be used when sending synchronisation messages to a legacy
-	system that only understands the original synchronisation protocol.
-
-	1 selects the current synchronisation protocol (version 1). This
-	should be used where possible.
-
-	Kernels with this sync_version entry are able to receive messages
-	of both version 1 and version 2 of the synchronisation protocol.
diff --git a/Documentation/networking/kcm.rst b/Documentation/networking/kcm.rst
new file mode 100644
index 000000000000..db0f5560ac1c
--- /dev/null
+++ b/Documentation/networking/kcm.rst
@@ -0,0 +1,290 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Kernel Connection Multiplexor
+=============================
+
+Kernel Connection Multiplexor (KCM) is a mechanism that provides a message based
+interface over TCP for generic application protocols. With KCM an application
+can efficiently send and receive application protocol messages over TCP using
+datagram sockets.
+
+KCM implements an NxM multiplexor in the kernel as diagrammed below::
+
+    +------------+   +------------+   +------------+   +------------+
+    | KCM socket |   | KCM socket |   | KCM socket |   | KCM socket |
+    +------------+   +------------+   +------------+   +------------+
+	|                 |               |                |
+	+-----------+     |               |     +----------+
+		    |     |               |     |
+		+----------------------------------+
+		|           Multiplexor            |
+		+----------------------------------+
+		    |   |           |           |  |
+	+---------+   |           |           |  ------------+
+	|             |           |           |              |
+    +----------+  +----------+  +----------+  +----------+ +----------+
+    |  Psock   |  |  Psock   |  |  Psock   |  |  Psock   | |  Psock   |
+    +----------+  +----------+  +----------+  +----------+ +----------+
+	|              |           |            |             |
+    +----------+  +----------+  +----------+  +----------+ +----------+
+    | TCP sock |  | TCP sock |  | TCP sock |  | TCP sock | | TCP sock |
+    +----------+  +----------+  +----------+  +----------+ +----------+
+
+KCM sockets
+===========
+
+The KCM sockets provide the user interface to the multiplexor. All the KCM sockets
+bound to a multiplexor are considered to have equivalent function, and I/O
+operations in different sockets may be done in parallel without the need for
+synchronization between threads in userspace.
+
+Multiplexor
+===========
+
+The multiplexor provides the message steering. In the transmit path, messages
+written on a KCM socket are sent atomically on an appropriate TCP socket.
+Similarly, in the receive path, messages are constructed on each TCP socket
+(Psock) and complete messages are steered to a KCM socket.
+
+TCP sockets & Psocks
+====================
+
+TCP sockets may be bound to a KCM multiplexor. A Psock structure is allocated
+for each bound TCP socket, this structure holds the state for constructing
+messages on receive as well as other connection specific information for KCM.
+
+Connected mode semantics
+========================
+
+Each multiplexor assumes that all attached TCP connections are to the same
+destination and can use the different connections for load balancing when
+transmitting. The normal send and recv calls (include sendmmsg and recvmmsg)
+can be used to send and receive messages from the KCM socket.
+
+Socket types
+============
+
+KCM supports SOCK_DGRAM and SOCK_SEQPACKET socket types.
+
+Message delineation
+-------------------
+
+Messages are sent over a TCP stream with some application protocol message
+format that typically includes a header which frames the messages. The length
+of a received message can be deduced from the application protocol header
+(often just a simple length field).
+
+A TCP stream must be parsed to determine message boundaries. Berkeley Packet
+Filter (BPF) is used for this. When attaching a TCP socket to a multiplexor a
+BPF program must be specified. The program is called at the start of receiving
+a new message and is given an skbuff that contains the bytes received so far.
+It parses the message header and returns the length of the message. Given this
+information, KCM will construct the message of the stated length and deliver it
+to a KCM socket.
+
+TCP socket management
+---------------------
+
+When a TCP socket is attached to a KCM multiplexor data ready (POLLIN) and
+write space available (POLLOUT) events are handled by the multiplexor. If there
+is a state change (disconnection) or other error on a TCP socket, an error is
+posted on the TCP socket so that a POLLERR event happens and KCM discontinues
+using the socket. When the application gets the error notification for a
+TCP socket, it should unattach the socket from KCM and then handle the error
+condition (the typical response is to close the socket and create a new
+connection if necessary).
+
+KCM limits the maximum receive message size to be the size of the receive
+socket buffer on the attached TCP socket (the socket buffer size can be set by
+SO_RCVBUF). If the length of a new message reported by the BPF program is
+greater than this limit a corresponding error (EMSGSIZE) is posted on the TCP
+socket. The BPF program may also enforce a maximum messages size and report an
+error when it is exceeded.
+
+A timeout may be set for assembling messages on a receive socket. The timeout
+value is taken from the receive timeout of the attached TCP socket (this is set
+by SO_RCVTIMEO). If the timer expires before assembly is complete an error
+(ETIMEDOUT) is posted on the socket.
+
+User interface
+==============
+
+Creating a multiplexor
+----------------------
+
+A new multiplexor and initial KCM socket is created by a socket call::
+
+  socket(AF_KCM, type, protocol)
+
+- type is either SOCK_DGRAM or SOCK_SEQPACKET
+- protocol is KCMPROTO_CONNECTED
+
+Cloning KCM sockets
+-------------------
+
+After the first KCM socket is created using the socket call as described
+above, additional sockets for the multiplexor can be created by cloning
+a KCM socket. This is accomplished by an ioctl on a KCM socket::
+
+  /* From linux/kcm.h */
+  struct kcm_clone {
+	int fd;
+  };
+
+  struct kcm_clone info;
+
+  memset(&info, 0, sizeof(info));
+
+  err = ioctl(kcmfd, SIOCKCMCLONE, &info);
+
+  if (!err)
+    newkcmfd = info.fd;
+
+Attach transport sockets
+------------------------
+
+Attaching of transport sockets to a multiplexor is performed by calling an
+ioctl on a KCM socket for the multiplexor. e.g.::
+
+  /* From linux/kcm.h */
+  struct kcm_attach {
+	int fd;
+	int bpf_fd;
+  };
+
+  struct kcm_attach info;
+
+  memset(&info, 0, sizeof(info));
+
+  info.fd = tcpfd;
+  info.bpf_fd = bpf_prog_fd;
+
+  ioctl(kcmfd, SIOCKCMATTACH, &info);
+
+The kcm_attach structure contains:
+
+  - fd: file descriptor for TCP socket being attached
+  - bpf_prog_fd: file descriptor for compiled BPF program downloaded
+
+Unattach transport sockets
+--------------------------
+
+Unattaching a transport socket from a multiplexor is straightforward. An
+"unattach" ioctl is done with the kcm_unattach structure as the argument::
+
+  /* From linux/kcm.h */
+  struct kcm_unattach {
+	int fd;
+  };
+
+  struct kcm_unattach info;
+
+  memset(&info, 0, sizeof(info));
+
+  info.fd = cfd;
+
+  ioctl(fd, SIOCKCMUNATTACH, &info);
+
+Disabling receive on KCM socket
+-------------------------------
+
+A setsockopt is used to disable or enable receiving on a KCM socket.
+When receive is disabled, any pending messages in the socket's
+receive buffer are moved to other sockets. This feature is useful
+if an application thread knows that it will be doing a lot of
+work on a request and won't be able to service new messages for a
+while. Example use::
+
+  int val = 1;
+
+  setsockopt(kcmfd, SOL_KCM, KCM_RECV_DISABLE, &val, sizeof(val))
+
+BFP programs for message delineation
+------------------------------------
+
+BPF programs can be compiled using the BPF LLVM backend. For example,
+the BPF program for parsing Thrift is::
+
+  #include "bpf.h" /* for __sk_buff */
+  #include "bpf_helpers.h" /* for load_word intrinsic */
+
+  SEC("socket_kcm")
+  int bpf_prog1(struct __sk_buff *skb)
+  {
+       return load_word(skb, 0) + 4;
+  }
+
+  char _license[] SEC("license") = "GPL";
+
+Use in applications
+===================
+
+KCM accelerates application layer protocols. Specifically, it allows
+applications to use a message based interface for sending and receiving
+messages. The kernel provides necessary assurances that messages are sent
+and received atomically. This relieves much of the burden applications have
+in mapping a message based protocol onto the TCP stream. KCM also make
+application layer messages a unit of work in the kernel for the purposes of
+steering and scheduling, which in turn allows a simpler networking model in
+multithreaded applications.
+
+Configurations
+--------------
+
+In an Nx1 configuration, KCM logically provides multiple socket handles
+to the same TCP connection. This allows parallelism between in I/O
+operations on the TCP socket (for instance copyin and copyout of data is
+parallelized). In an application, a KCM socket can be opened for each
+processing thread and inserted into the epoll (similar to how SO_REUSEPORT
+is used to allow multiple listener sockets on the same port).
+
+In a MxN configuration, multiple connections are established to the
+same destination. These are used for simple load balancing.
+
+Message batching
+----------------
+
+The primary purpose of KCM is load balancing between KCM sockets and hence
+threads in a nominal use case. Perfect load balancing, that is steering
+each received message to a different KCM socket or steering each sent
+message to a different TCP socket, can negatively impact performance
+since this doesn't allow for affinities to be established. Balancing
+based on groups, or batches of messages, can be beneficial for performance.
+
+On transmit, there are three ways an application can batch (pipeline)
+messages on a KCM socket.
+
+  1) Send multiple messages in a single sendmmsg.
+  2) Send a group of messages each with a sendmsg call, where all messages
+     except the last have MSG_BATCH in the flags of sendmsg call.
+  3) Create "super message" composed of multiple messages and send this
+     with a single sendmsg.
+
+On receive, the KCM module attempts to queue messages received on the
+same KCM socket during each TCP ready callback. The targeted KCM socket
+changes at each receive ready callback on the KCM socket. The application
+does not need to configure this.
+
+Error handling
+--------------
+
+An application should include a thread to monitor errors raised on
+the TCP connection. Normally, this will be done by placing each
+TCP socket attached to a KCM multiplexor in epoll set for POLLERR
+event. If an error occurs on an attached TCP socket, KCM sets an EPIPE
+on the socket thus waking up the application thread. When the application
+sees the error (which may just be a disconnect) it should unattach the
+socket from KCM and then close it. It is assumed that once an error is
+posted on the TCP socket the data stream is unrecoverable (i.e. an error
+may have occurred in the middle of receiving a message).
+
+TCP connection monitoring
+-------------------------
+
+In KCM there is no means to correlate a message to the TCP socket that
+was used to send or receive the message (except in the case there is
+only one attached TCP socket). However, the application does retain
+an open file descriptor to the socket so it will be able to get statistics
+from the socket which can be used in detecting issues (such as high
+retransmissions on the socket).
diff --git a/Documentation/networking/kcm.txt b/Documentation/networking/kcm.txt
deleted file mode 100644
index b773a5278ac4..000000000000
--- a/Documentation/networking/kcm.txt
+++ /dev/null
@@ -1,285 +0,0 @@
-Kernel Connection Multiplexor
------------------------------
-
-Kernel Connection Multiplexor (KCM) is a mechanism that provides a message based
-interface over TCP for generic application protocols. With KCM an application
-can efficiently send and receive application protocol messages over TCP using
-datagram sockets.
-
-KCM implements an NxM multiplexor in the kernel as diagrammed below:
-
-+------------+   +------------+   +------------+   +------------+
-| KCM socket |   | KCM socket |   | KCM socket |   | KCM socket |
-+------------+   +------------+   +------------+   +------------+
-      |                 |               |                |
-      +-----------+     |               |     +----------+
-                  |     |               |     |
-               +----------------------------------+
-               |           Multiplexor            |
-               +----------------------------------+
-                 |   |           |           |  |
-       +---------+   |           |           |  ------------+
-       |             |           |           |              |
-+----------+  +----------+  +----------+  +----------+ +----------+
-|  Psock   |  |  Psock   |  |  Psock   |  |  Psock   | |  Psock   |
-+----------+  +----------+  +----------+  +----------+ +----------+
-      |              |           |            |             |
-+----------+  +----------+  +----------+  +----------+ +----------+
-| TCP sock |  | TCP sock |  | TCP sock |  | TCP sock | | TCP sock |
-+----------+  +----------+  +----------+  +----------+ +----------+
-
-KCM sockets
------------
-
-The KCM sockets provide the user interface to the multiplexor. All the KCM sockets
-bound to a multiplexor are considered to have equivalent function, and I/O
-operations in different sockets may be done in parallel without the need for
-synchronization between threads in userspace.
-
-Multiplexor
------------
-
-The multiplexor provides the message steering. In the transmit path, messages
-written on a KCM socket are sent atomically on an appropriate TCP socket.
-Similarly, in the receive path, messages are constructed on each TCP socket
-(Psock) and complete messages are steered to a KCM socket.
-
-TCP sockets & Psocks
---------------------
-
-TCP sockets may be bound to a KCM multiplexor. A Psock structure is allocated
-for each bound TCP socket, this structure holds the state for constructing
-messages on receive as well as other connection specific information for KCM.
-
-Connected mode semantics
-------------------------
-
-Each multiplexor assumes that all attached TCP connections are to the same
-destination and can use the different connections for load balancing when
-transmitting. The normal send and recv calls (include sendmmsg and recvmmsg)
-can be used to send and receive messages from the KCM socket.
-
-Socket types
-------------
-
-KCM supports SOCK_DGRAM and SOCK_SEQPACKET socket types.
-
-Message delineation
--------------------
-
-Messages are sent over a TCP stream with some application protocol message
-format that typically includes a header which frames the messages. The length
-of a received message can be deduced from the application protocol header
-(often just a simple length field).
-
-A TCP stream must be parsed to determine message boundaries. Berkeley Packet
-Filter (BPF) is used for this. When attaching a TCP socket to a multiplexor a
-BPF program must be specified. The program is called at the start of receiving
-a new message and is given an skbuff that contains the bytes received so far.
-It parses the message header and returns the length of the message. Given this
-information, KCM will construct the message of the stated length and deliver it
-to a KCM socket.
-
-TCP socket management
----------------------
-
-When a TCP socket is attached to a KCM multiplexor data ready (POLLIN) and
-write space available (POLLOUT) events are handled by the multiplexor. If there
-is a state change (disconnection) or other error on a TCP socket, an error is
-posted on the TCP socket so that a POLLERR event happens and KCM discontinues
-using the socket. When the application gets the error notification for a
-TCP socket, it should unattach the socket from KCM and then handle the error
-condition (the typical response is to close the socket and create a new
-connection if necessary).
-
-KCM limits the maximum receive message size to be the size of the receive
-socket buffer on the attached TCP socket (the socket buffer size can be set by
-SO_RCVBUF). If the length of a new message reported by the BPF program is
-greater than this limit a corresponding error (EMSGSIZE) is posted on the TCP
-socket. The BPF program may also enforce a maximum messages size and report an
-error when it is exceeded.
-
-A timeout may be set for assembling messages on a receive socket. The timeout
-value is taken from the receive timeout of the attached TCP socket (this is set
-by SO_RCVTIMEO). If the timer expires before assembly is complete an error
-(ETIMEDOUT) is posted on the socket.
-
-User interface
-==============
-
-Creating a multiplexor
-----------------------
-
-A new multiplexor and initial KCM socket is created by a socket call:
-
-  socket(AF_KCM, type, protocol)
-
-  - type is either SOCK_DGRAM or SOCK_SEQPACKET
-  - protocol is KCMPROTO_CONNECTED
-
-Cloning KCM sockets
--------------------
-
-After the first KCM socket is created using the socket call as described
-above, additional sockets for the multiplexor can be created by cloning
-a KCM socket. This is accomplished by an ioctl on a KCM socket:
-
-  /* From linux/kcm.h */
-  struct kcm_clone {
-        int fd;
-  };
-
-  struct kcm_clone info;
-
-  memset(&info, 0, sizeof(info));
-
-  err = ioctl(kcmfd, SIOCKCMCLONE, &info);
-
-  if (!err)
-    newkcmfd = info.fd;
-
-Attach transport sockets
-------------------------
-
-Attaching of transport sockets to a multiplexor is performed by calling an
-ioctl on a KCM socket for the multiplexor. e.g.:
-
-  /* From linux/kcm.h */
-  struct kcm_attach {
-        int fd;
-	int bpf_fd;
-  };
-
-  struct kcm_attach info;
-
-  memset(&info, 0, sizeof(info));
-
-  info.fd = tcpfd;
-  info.bpf_fd = bpf_prog_fd;
-
-  ioctl(kcmfd, SIOCKCMATTACH, &info);
-
-The kcm_attach structure contains:
-  fd: file descriptor for TCP socket being attached
-  bpf_prog_fd: file descriptor for compiled BPF program downloaded
-
-Unattach transport sockets
---------------------------
-
-Unattaching a transport socket from a multiplexor is straightforward. An
-"unattach" ioctl is done with the kcm_unattach structure as the argument:
-
-  /* From linux/kcm.h */
-  struct kcm_unattach {
-        int fd;
-  };
-
-  struct kcm_unattach info;
-
-  memset(&info, 0, sizeof(info));
-
-  info.fd = cfd;
-
-  ioctl(fd, SIOCKCMUNATTACH, &info);
-
-Disabling receive on KCM socket
--------------------------------
-
-A setsockopt is used to disable or enable receiving on a KCM socket.
-When receive is disabled, any pending messages in the socket's
-receive buffer are moved to other sockets. This feature is useful
-if an application thread knows that it will be doing a lot of
-work on a request and won't be able to service new messages for a
-while. Example use:
-
-  int val = 1;
-
-  setsockopt(kcmfd, SOL_KCM, KCM_RECV_DISABLE, &val, sizeof(val))
-
-BFP programs for message delineation
-------------------------------------
-
-BPF programs can be compiled using the BPF LLVM backend. For example,
-the BPF program for parsing Thrift is:
-
-  #include "bpf.h" /* for __sk_buff */
-  #include "bpf_helpers.h" /* for load_word intrinsic */
-
-  SEC("socket_kcm")
-  int bpf_prog1(struct __sk_buff *skb)
-  {
-       return load_word(skb, 0) + 4;
-  }
-
-  char _license[] SEC("license") = "GPL";
-
-Use in applications
-===================
-
-KCM accelerates application layer protocols. Specifically, it allows
-applications to use a message based interface for sending and receiving
-messages. The kernel provides necessary assurances that messages are sent
-and received atomically. This relieves much of the burden applications have
-in mapping a message based protocol onto the TCP stream. KCM also make
-application layer messages a unit of work in the kernel for the purposes of
-steering and scheduling, which in turn allows a simpler networking model in
-multithreaded applications.
-
-Configurations
---------------
-
-In an Nx1 configuration, KCM logically provides multiple socket handles
-to the same TCP connection. This allows parallelism between in I/O
-operations on the TCP socket (for instance copyin and copyout of data is
-parallelized). In an application, a KCM socket can be opened for each
-processing thread and inserted into the epoll (similar to how SO_REUSEPORT
-is used to allow multiple listener sockets on the same port).
-
-In a MxN configuration, multiple connections are established to the
-same destination. These are used for simple load balancing.
-
-Message batching
-----------------
-
-The primary purpose of KCM is load balancing between KCM sockets and hence
-threads in a nominal use case. Perfect load balancing, that is steering
-each received message to a different KCM socket or steering each sent
-message to a different TCP socket, can negatively impact performance
-since this doesn't allow for affinities to be established. Balancing
-based on groups, or batches of messages, can be beneficial for performance.
-
-On transmit, there are three ways an application can batch (pipeline)
-messages on a KCM socket.
-  1) Send multiple messages in a single sendmmsg.
-  2) Send a group of messages each with a sendmsg call, where all messages
-     except the last have MSG_BATCH in the flags of sendmsg call.
-  3) Create "super message" composed of multiple messages and send this
-     with a single sendmsg.
-
-On receive, the KCM module attempts to queue messages received on the
-same KCM socket during each TCP ready callback. The targeted KCM socket
-changes at each receive ready callback on the KCM socket. The application
-does not need to configure this.
-
-Error handling
---------------
-
-An application should include a thread to monitor errors raised on
-the TCP connection. Normally, this will be done by placing each
-TCP socket attached to a KCM multiplexor in epoll set for POLLERR
-event. If an error occurs on an attached TCP socket, KCM sets an EPIPE
-on the socket thus waking up the application thread. When the application
-sees the error (which may just be a disconnect) it should unattach the
-socket from KCM and then close it. It is assumed that once an error is
-posted on the TCP socket the data stream is unrecoverable (i.e. an error
-may have occurred in the middle of receiving a message).
-
-TCP connection monitoring
--------------------------
-
-In KCM there is no means to correlate a message to the TCP socket that
-was used to send or receive the message (except in the case there is
-only one attached TCP socket). However, the application does retain
-an open file descriptor to the socket so it will be able to get statistics
-from the socket which can be used in detecting issues (such as high
-retransmissions on the socket).
diff --git a/Documentation/networking/ltpc.txt b/Documentation/networking/ltpc.txt
index 0bf3220c715b..a005a73b76d0 100644
--- a/Documentation/networking/ltpc.txt
+++ b/Documentation/networking/ltpc.txt
@@ -99,7 +99,7 @@ treat the LocalTalk device like an ordinary Ethernet device, even if
 that's what it looks like to Netatalk.
 
 Instead, you follow the same procedure as for doing IP in EtherTalk.
-See Documentation/networking/ipddp.txt for more information about the
+See Documentation/networking/ipddp.rst for more information about the
 kernel driver and userspace tools needed.
 
 --------------------------------------
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 999eb41da81d..494614573c67 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -1051,7 +1051,7 @@ for more information on hardware timestamps.
 -------------------------------------------------------------------------------
 
 - Packet sockets work well together with Linux socket filters, thus you also
-  might want to have a look at Documentation/networking/filter.txt
+  might want to have a look at Documentation/networking/filter.rst
 
 --------------------------------------------------------------------------------
 + THANKS
diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst
index 10e11099e74a..4edd0d38779e 100644
--- a/Documentation/networking/snmp_counter.rst
+++ b/Documentation/networking/snmp_counter.rst
@@ -792,7 +792,7 @@ counters to indicate the ACK is skipped in which scenario. The ACK
 would only be skipped if the received packet is either a SYN packet or
 it has no data.
 
-.. _sysctl document: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
+.. _sysctl document: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.rst
 
 * TcpExtTCPACKSkippedSynRecv
 
diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
index 0924d29636ad..1831e431f725 100644
--- a/Documentation/power/pci.rst
+++ b/Documentation/power/pci.rst
@@ -1004,41 +1004,39 @@ including the PCI bus type.  The flags should be set once at the driver probe
 time with the help of the dev_pm_set_driver_flags() function and they should not
 be updated directly afterwards.
 
-The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete
-mechanism allowing device suspend/resume callbacks to be skipped if the device
-is in runtime suspend when the system suspend starts.  That also affects all of
-the ancestors of the device, so this flag should only be used if absolutely
-necessary.
-
-The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a
-positive value from pci_pm_prepare() if the ->prepare callback provided by the
+The DPM_FLAG_NO_DIRECT_COMPLETE flag prevents the PM core from using the
+direct-complete mechanism allowing device suspend/resume callbacks to be skipped
+if the device is in runtime suspend when the system suspend starts.  That also
+affects all of the ancestors of the device, so this flag should only be used if
+absolutely necessary.
+
+The DPM_FLAG_SMART_PREPARE flag causes the PCI bus type to return a positive
+value from pci_pm_prepare() only if the ->prepare callback provided by the
 driver of the device returns a positive value.  That allows the driver to opt
-out from using the direct-complete mechanism dynamically.
+out from using the direct-complete mechanism dynamically (whereas setting
+DPM_FLAG_NO_DIRECT_COMPLETE means permanent opt-out).
 
 The DPM_FLAG_SMART_SUSPEND flag tells the PCI bus type that from the driver's
 perspective the device can be safely left in runtime suspend during system
 suspend.  That causes pci_pm_suspend(), pci_pm_freeze() and pci_pm_poweroff()
-to skip resuming the device from runtime suspend unless there are PCI-specific
-reasons for doing that.  Also, it causes pci_pm_suspend_late/noirq(),
-pci_pm_freeze_late/noirq() and pci_pm_poweroff_late/noirq() to return early
-if the device remains in runtime suspend in the beginning of the "late" phase
-of the system-wide transition under way.  Moreover, if the device is in
-runtime suspend in pci_pm_resume_noirq() or pci_pm_restore_noirq(), its runtime
-power management status will be changed to "active" (as it is going to be put
-into D0 going forward), but if it is in runtime suspend in pci_pm_thaw_noirq(),
-the function will set the power.direct_complete flag for it (to make the PM core
-skip the subsequent "thaw" callbacks for it) and return.
-
-Setting the DPM_FLAG_LEAVE_SUSPENDED flag means that the driver prefers the
-device to be left in suspend after system-wide transitions to the working state.
-This flag is checked by the PM core, but the PCI bus type informs the PM core
-which devices may be left in suspend from its perspective (that happens during
-the "noirq" phase of system-wide suspend and analogous transitions) and next it
-uses the dev_pm_may_skip_resume() helper to decide whether or not to return from
-pci_pm_resume_noirq() early, as the PM core will skip the remaining resume
-callbacks for the device during the transition under way and will set its
-runtime PM status to "suspended" if dev_pm_may_skip_resume() returns "true" for
-it.
+to avoid resuming the device from runtime suspend unless there are PCI-specific
+reasons for doing that.  Also, it causes pci_pm_suspend_late/noirq() and
+pci_pm_poweroff_late/noirq() to return early if the device remains in runtime
+suspend during the "late" phase of the system-wide transition under way.
+Moreover, if the device is in runtime suspend in pci_pm_resume_noirq() or
+pci_pm_restore_noirq(), its runtime PM status will be changed to "active" (as it
+is going to be put into D0 going forward).
+
+Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows its
+"noirq" and "early" resume callbacks to be skipped if the device can be left
+in suspend after a system-wide transition into the working state.  This flag is
+taken into consideration by the PM core along with the power.may_skip_resume
+status bit of the device which is set by pci_pm_suspend_noirq() in certain
+situations.  If the PM core determines that the driver's "noirq" and "early"
+resume callbacks should be skipped, the dev_pm_skip_resume() helper function
+will return "true" and that will cause pci_pm_resume_noirq() and
+pci_pm_resume_early() to return upfront without touching the device and
+executing the driver callbacks.
 
 3.2. Device Runtime Power Management
 ------------------------------------
diff --git a/Documentation/powerpc/cxl.rst b/Documentation/powerpc/cxl.rst
index 920546d81326..d2d77057610e 100644
--- a/Documentation/powerpc/cxl.rst
+++ b/Documentation/powerpc/cxl.rst
@@ -133,6 +133,7 @@ User API
 ========
 
 1. AFU character devices
+^^^^^^^^^^^^^^^^^^^^^^^^
 
     For AFUs operating in AFU directed mode, two character device
     files will be created. /dev/cxl/afu0.0m will correspond to a
@@ -395,6 +396,7 @@ read
 
 
 2. Card character device (powerVM guest only)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
     In a powerVM guest, an extra character device is created for the
     card. The device is only used to write (flash) a new image on the
diff --git a/Documentation/powerpc/firmware-assisted-dump.rst b/Documentation/powerpc/firmware-assisted-dump.rst
index b3f3ee135dbe..20ea8cdee0aa 100644
--- a/Documentation/powerpc/firmware-assisted-dump.rst
+++ b/Documentation/powerpc/firmware-assisted-dump.rst
@@ -344,7 +344,7 @@ Here is the list of files under powerpc debugfs:
 
 
 NOTE:
-      Please refer to Documentation/filesystems/debugfs.txt on
+      Please refer to Documentation/filesystems/debugfs.rst on
       how to mount the debugfs filesystem.
 
 
diff --git a/Documentation/powerpc/index.rst b/Documentation/powerpc/index.rst
index 0d45f0fc8e57..afe2d5e54db6 100644
--- a/Documentation/powerpc/index.rst
+++ b/Documentation/powerpc/index.rst
@@ -30,6 +30,7 @@ powerpc
     syscall64-abi
     transactional_memory
     ultravisor
+    vas-api
 
 .. only::  subproject and html
 
diff --git a/Documentation/powerpc/vas-api.rst b/Documentation/powerpc/vas-api.rst
new file mode 100644
index 000000000000..1217c2f1595e
--- /dev/null
+++ b/Documentation/powerpc/vas-api.rst
@@ -0,0 +1,292 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. _VAS-API:
+
+===================================================
+Virtual Accelerator Switchboard (VAS) userspace API
+===================================================
+
+Introduction
+============
+
+Power9 processor introduced Virtual Accelerator Switchboard (VAS) which
+allows both userspace and kernel communicate to co-processor
+(hardware accelerator) referred to as the Nest Accelerator (NX). The NX
+unit comprises of one or more hardware engines or co-processor types
+such as 842 compression, GZIP compression and encryption. On power9,
+userspace applications will have access to only GZIP Compression engine
+which supports ZLIB and GZIP compression algorithms in the hardware.
+
+To communicate with NX, kernel has to establish a channel or window and
+then requests can be submitted directly without kernel involvement.
+Requests to the GZIP engine must be formatted as a co-processor Request
+Block (CRB) and these CRBs must be submitted to the NX using COPY/PASTE
+instructions to paste the CRB to hardware address that is associated with
+the engine's request queue.
+
+The GZIP engine provides two priority levels of requests: Normal and
+High. Only Normal requests are supported from userspace right now.
+
+This document explains userspace API that is used to interact with
+kernel to setup channel / window which can be used to send compression
+requests directly to NX accelerator.
+
+
+Overview
+========
+
+Application access to the GZIP engine is provided through
+/dev/crypto/nx-gzip device node implemented by the VAS/NX device driver.
+An application must open the /dev/crypto/nx-gzip device to obtain a file
+descriptor (fd). Then should issue VAS_TX_WIN_OPEN ioctl with this fd to
+establish connection to the engine. It means send window is opened on GZIP
+engine for this process. Once a connection is established, the application
+should use the mmap() system call to map the hardware address of engine's
+request queue into the application's virtual address space.
+
+The application can then submit one or more requests to the the engine by
+using copy/paste instructions and pasting the CRBs to the virtual address
+(aka paste_address) returned by mmap(). User space can close the
+established connection or send window by closing the file descriptior
+(close(fd)) or upon the process exit.
+
+Note that applications can send several requests with the same window or
+can establish multiple windows, but one window for each file descriptor.
+
+Following sections provide additional details and references about the
+individual steps.
+
+NX-GZIP Device Node
+===================
+
+There is one /dev/crypto/nx-gzip node in the system and it provides
+access to all GZIP engines in the system. The only valid operations on
+/dev/crypto/nx-gzip are:
+
+	* open() the device for read and write.
+	* issue VAS_TX_WIN_OPEN ioctl
+	* mmap() the engine's request queue into application's virtual
+	  address space (i.e. get a paste_address for the co-processor
+	  engine).
+	* close the device node.
+
+Other file operations on this device node are undefined.
+
+Note that the copy and paste operations go directly to the hardware and
+do not go through this device. Refer COPY/PASTE document for more
+details.
+
+Although a system may have several instances of the NX co-processor
+engines (typically, one per P9 chip) there is just one
+/dev/crypto/nx-gzip device node in the system. When the nx-gzip device
+node is opened, Kernel opens send window on a suitable instance of NX
+accelerator. It finds CPU on which the user process is executing and
+determine the NX instance for the corresponding chip on which this CPU
+belongs.
+
+Applications may chose a specific instance of the NX co-processor using
+the vas_id field in the VAS_TX_WIN_OPEN ioctl as detailed below.
+
+A userspace library libnxz is available here but still in development:
+	 https://github.com/abalib/power-gzip
+
+Applications that use inflate / deflate calls can link with libnxz
+instead of libz and use NX GZIP compression without any modification.
+
+Open /dev/crypto/nx-gzip
+========================
+
+The nx-gzip device should be opened for read and write. No special
+privileges are needed to open the device. Each window corresponds to one
+file descriptor. So if the userspace process needs multiple windows,
+several open calls have to be issued.
+
+See open(2) system call man pages for other details such as return values,
+error codes and restrictions.
+
+VAS_TX_WIN_OPEN ioctl
+=====================
+
+Applications should use the VAS_TX_WIN_OPEN ioctl as follows to establish
+a connection with NX co-processor engine:
+
+	::
+		struct vas_tx_win_open_attr {
+			__u32   version;
+			__s16   vas_id; /* specific instance of vas or -1
+						for default */
+			__u16   reserved1;
+			__u64   flags;	/* For future use */
+			__u64   reserved2[6];
+		};
+
+	version: The version field must be currently set to 1.
+	vas_id: If '-1' is passed, kernel will make a best-effort attempt
+		to assign an optimal instance of NX for the process. To
+		select the specific VAS instance, refer
+		"Discovery of available VAS engines" section below.
+
+	flags, reserved1 and reserved2[6] fields are for future extension
+	and must be set to 0.
+
+	The attributes attr for the VAS_TX_WIN_OPEN ioctl are defined as
+	follows:
+		#define VAS_MAGIC 'v'
+		#define VAS_TX_WIN_OPEN _IOW(VAS_MAGIC, 1,
+						struct vas_tx_win_open_attr)
+
+		struct vas_tx_win_open_attr attr;
+		rc = ioctl(fd, VAS_TX_WIN_OPEN, &attr);
+
+	The VAS_TX_WIN_OPEN ioctl returns 0 on success. On errors, it
+	returns -1 and sets the errno variable to indicate the error.
+
+	Error conditions:
+		EINVAL	fd does not refer to a valid VAS device.
+		EINVAL	Invalid vas ID
+		EINVAL	version is not set with proper value
+		EEXIST	Window is already opened for the given fd
+		ENOMEM	Memory is not available to allocate window
+		ENOSPC	System has too many active windows (connections)
+			opened
+		EINVAL	reserved fields are not set to 0.
+
+	See the ioctl(2) man page for more details, error codes and
+	restrictions.
+
+mmap() NX-GZIP device
+=====================
+
+The mmap() system call for a NX-GZIP device fd returns a paste_address
+that the application can use to copy/paste its CRB to the hardware engines.
+	::
+
+		paste_addr = mmap(addr, size, prot, flags, fd, offset);
+
+	Only restrictions on mmap for a NX-GZIP device fd are:
+		* size should be PAGE_SIZE
+		* offset parameter should be 0ULL
+
+	Refer to mmap(2) man page for additional details/restrictions.
+	In addition to the error conditions listed on the mmap(2) man
+	page, can also fail with one of the following error codes:
+
+		EINVAL	fd is not associated with an open window
+			(i.e mmap() does not follow a successful call
+			to the VAS_TX_WIN_OPEN ioctl).
+		EINVAL	offset field is not 0ULL.
+
+Discovery of available VAS engines
+==================================
+
+Each available VAS instance in the system will have a device tree node
+like /proc/device-tree/vas@* or /proc/device-tree/xscom@*/vas@*.
+Determine the chip or VAS instance and use the corresponding ibm,vas-id
+property value in this node to select specific VAS instance.
+
+Copy/Paste operations
+=====================
+
+Applications should use the copy and paste instructions to send CRB to NX.
+Refer section 4.4 in PowerISA for Copy/Paste instructions:
+https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0
+
+CRB Specification and use NX
+============================
+
+Applications should format requests to the co-processor using the
+co-processor Request Block (CRBs). Refer NX-GZIP user's manual for the format
+of CRB and use NX from userspace such as sending requests and checking
+request status.
+
+NX Fault handling
+=================
+
+Applications send requests to NX and wait for the status by polling on
+co-processor Status Block (CSB) flags. NX updates status in CSB after each
+request is processed. Refer NX-GZIP user's manual for the format of CSB and
+status flags.
+
+In case if NX encounters translation error (called NX page fault) on CSB
+address or any request buffer, raises an interrupt on the CPU to handle the
+fault. Page fault can happen if an application passes invalid addresses or
+request buffers are not in memory. The operating system handles the fault by
+updating CSB with the following data:
+
+	csb.flags = CSB_V;
+	csb.cc = CSB_CC_TRANSLATION;
+	csb.ce = CSB_CE_TERMINATION;
+	csb.address = fault_address;
+
+When an application receives translation error, it can touch or access
+the page that has a fault address so that this page will be in memory. Then
+the application can resend this request to NX.
+
+If the OS can not update CSB due to invalid CSB address, sends SEGV signal
+to the process who opened the send window on which the original request was
+issued. This signal returns with the following siginfo struct:
+
+	siginfo.si_signo = SIGSEGV;
+	siginfo.si_errno = EFAULT;
+	siginfo.si_code = SEGV_MAPERR;
+	siginfo.si_addr = CSB adress;
+
+In the case of multi-thread applications, NX send windows can be shared
+across all threads. For example, a child thread can open a send window,
+but other threads can send requests to NX using this window. These
+requests will be successful even in the case of OS handling faults as long
+as CSB address is valid. If the NX request contains an invalid CSB address,
+the signal will be sent to the child thread that opened the window. But if
+the thread is exited without closing the window and the request is issued
+using this window. the signal will be issued to the thread group leader
+(tgid). It is up to the application whether to ignore or handle these
+signals.
+
+NX-GZIP User's Manual:
+https://github.com/libnxz/power-gzip/blob/master/power_nx_gzip_um.pdf
+
+Simple example
+==============
+
+	::
+		int use_nx_gzip()
+		{
+			int rc, fd;
+			void *addr;
+			struct vas_setup_attr txattr;
+
+			fd = open("/dev/crypto/nx-gzip", O_RDWR);
+			if (fd < 0) {
+				fprintf(stderr, "open nx-gzip failed\n");
+				return -1;
+			}
+			memset(&txattr, 0, sizeof(txattr));
+			txattr.version = 1;
+			txattr.vas_id = -1
+			rc = ioctl(fd, VAS_TX_WIN_OPEN,
+					(unsigned long)&txattr);
+			if (rc < 0) {
+				fprintf(stderr, "ioctl() n %d, error %d\n",
+						rc, errno);
+				return rc;
+			}
+			addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
+					MAP_SHARED, fd, 0ULL);
+			if (addr == MAP_FAILED) {
+				fprintf(stderr, "mmap() failed, errno %d\n",
+						errno);
+				return -errno;
+			}
+			do {
+				//Format CRB request with compression or
+				//uncompression
+				// Refer tests for vas_copy/vas_paste
+				vas_copy((&crb, 0, 1);
+				vas_paste(addr, 0, 1);
+				// Poll on csb.flags with timeout
+				// csb address is listed in CRB
+			} while (true)
+			close(fd) or window can be closed upon process exit
+		}
+
+	Refer https://github.com/abalib/power-gzip for tests or more
+	use cases.
diff --git a/Documentation/process/adding-syscalls.rst b/Documentation/process/adding-syscalls.rst
index 1c3a840d06b9..a6b4a3a5bf3f 100644
--- a/Documentation/process/adding-syscalls.rst
+++ b/Documentation/process/adding-syscalls.rst
@@ -33,7 +33,7 @@ interface.
        to a somewhat opaque API.
 
  - If you're just exposing runtime system information, a new node in sysfs
-   (see ``Documentation/filesystems/sysfs.txt``) or the ``/proc`` filesystem may
+   (see ``Documentation/filesystems/sysfs.rst``) or the ``/proc`` filesystem may
    be more appropriate.  However, access to these mechanisms requires that the
    relevant filesystem is mounted, which might not always be the case (e.g.
    in a namespaced/sandboxed/chrooted environment).  Avoid adding any API to
diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst
index 8e56337d422d..3f8e9d5d95c2 100644
--- a/Documentation/process/submit-checklist.rst
+++ b/Documentation/process/submit-checklist.rst
@@ -107,7 +107,7 @@ and elsewhere regarding submitting Linux kernel patches.
     and why.
 
 26) If any ioctl's are added by the patch, then also update
-    ``Documentation/ioctl/ioctl-number.rst``.
+    ``Documentation/userspace-api/ioctl/ioctl-number.rst``.
 
 27) If your modified source code depends on or uses any of the kernel
     APIs or features that are related to the following ``Kconfig`` symbols,
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
deleted file mode 100644
index 523d54b60087..000000000000
--- a/Documentation/rbtree.txt
+++ /dev/null
@@ -1,429 +0,0 @@
-=================================
-Red-black Trees (rbtree) in Linux
-=================================
-
-
-:Date: January 18, 2007
-:Author: Rob Landley <rob@landley.net>
-
-What are red-black trees, and what are they for?
-------------------------------------------------
-
-Red-black trees are a type of self-balancing binary search tree, used for
-storing sortable key/value data pairs.  This differs from radix trees (which
-are used to efficiently store sparse arrays and thus use long integer indexes
-to insert/access/delete nodes) and hash tables (which are not kept sorted to
-be easily traversed in order, and must be tuned for a specific size and
-hash function where rbtrees scale gracefully storing arbitrary keys).
-
-Red-black trees are similar to AVL trees, but provide faster real-time bounded
-worst case performance for insertion and deletion (at most two rotations and
-three rotations, respectively, to balance the tree), with slightly slower
-(but still O(log n)) lookup time.
-
-To quote Linux Weekly News:
-
-    There are a number of red-black trees in use in the kernel.
-    The deadline and CFQ I/O schedulers employ rbtrees to
-    track requests; the packet CD/DVD driver does the same.
-    The high-resolution timer code uses an rbtree to organize outstanding
-    timer requests.  The ext3 filesystem tracks directory entries in a
-    red-black tree.  Virtual memory areas (VMAs) are tracked with red-black
-    trees, as are epoll file descriptors, cryptographic keys, and network
-    packets in the "hierarchical token bucket" scheduler.
-
-This document covers use of the Linux rbtree implementation.  For more
-information on the nature and implementation of Red Black Trees,  see:
-
-  Linux Weekly News article on red-black trees
-    http://lwn.net/Articles/184495/
-
-  Wikipedia entry on red-black trees
-    http://en.wikipedia.org/wiki/Red-black_tree
-
-Linux implementation of red-black trees
----------------------------------------
-
-Linux's rbtree implementation lives in the file "lib/rbtree.c".  To use it,
-"#include <linux/rbtree.h>".
-
-The Linux rbtree implementation is optimized for speed, and thus has one
-less layer of indirection (and better cache locality) than more traditional
-tree implementations.  Instead of using pointers to separate rb_node and data
-structures, each instance of struct rb_node is embedded in the data structure
-it organizes.  And instead of using a comparison callback function pointer,
-users are expected to write their own tree search and insert functions
-which call the provided rbtree functions.  Locking is also left up to the
-user of the rbtree code.
-
-Creating a new rbtree
----------------------
-
-Data nodes in an rbtree tree are structures containing a struct rb_node member::
-
-  struct mytype {
-  	struct rb_node node;
-  	char *keystring;
-  };
-
-When dealing with a pointer to the embedded struct rb_node, the containing data
-structure may be accessed with the standard container_of() macro.  In addition,
-individual members may be accessed directly via rb_entry(node, type, member).
-
-At the root of each rbtree is an rb_root structure, which is initialized to be
-empty via:
-
-  struct rb_root mytree = RB_ROOT;
-
-Searching for a value in an rbtree
-----------------------------------
-
-Writing a search function for your tree is fairly straightforward: start at the
-root, compare each value, and follow the left or right branch as necessary.
-
-Example::
-
-  struct mytype *my_search(struct rb_root *root, char *string)
-  {
-  	struct rb_node *node = root->rb_node;
-
-  	while (node) {
-  		struct mytype *data = container_of(node, struct mytype, node);
-		int result;
-
-		result = strcmp(string, data->keystring);
-
-		if (result < 0)
-  			node = node->rb_left;
-		else if (result > 0)
-  			node = node->rb_right;
-		else
-  			return data;
-	}
-	return NULL;
-  }
-
-Inserting data into an rbtree
------------------------------
-
-Inserting data in the tree involves first searching for the place to insert the
-new node, then inserting the node and rebalancing ("recoloring") the tree.
-
-The search for insertion differs from the previous search by finding the
-location of the pointer on which to graft the new node.  The new node also
-needs a link to its parent node for rebalancing purposes.
-
-Example::
-
-  int my_insert(struct rb_root *root, struct mytype *data)
-  {
-  	struct rb_node **new = &(root->rb_node), *parent = NULL;
-
-  	/* Figure out where to put new node */
-  	while (*new) {
-  		struct mytype *this = container_of(*new, struct mytype, node);
-  		int result = strcmp(data->keystring, this->keystring);
-
-		parent = *new;
-  		if (result < 0)
-  			new = &((*new)->rb_left);
-  		else if (result > 0)
-  			new = &((*new)->rb_right);
-  		else
-  			return FALSE;
-  	}
-
-  	/* Add new node and rebalance tree. */
-  	rb_link_node(&data->node, parent, new);
-  	rb_insert_color(&data->node, root);
-
-	return TRUE;
-  }
-
-Removing or replacing existing data in an rbtree
-------------------------------------------------
-
-To remove an existing node from a tree, call::
-
-  void rb_erase(struct rb_node *victim, struct rb_root *tree);
-
-Example::
-
-  struct mytype *data = mysearch(&mytree, "walrus");
-
-  if (data) {
-  	rb_erase(&data->node, &mytree);
-  	myfree(data);
-  }
-
-To replace an existing node in a tree with a new one with the same key, call::
-
-  void rb_replace_node(struct rb_node *old, struct rb_node *new,
-  			struct rb_root *tree);
-
-Replacing a node this way does not re-sort the tree: If the new node doesn't
-have the same key as the old node, the rbtree will probably become corrupted.
-
-Iterating through the elements stored in an rbtree (in sort order)
-------------------------------------------------------------------
-
-Four functions are provided for iterating through an rbtree's contents in
-sorted order.  These work on arbitrary trees, and should not need to be
-modified or wrapped (except for locking purposes)::
-
-  struct rb_node *rb_first(struct rb_root *tree);
-  struct rb_node *rb_last(struct rb_root *tree);
-  struct rb_node *rb_next(struct rb_node *node);
-  struct rb_node *rb_prev(struct rb_node *node);
-
-To start iterating, call rb_first() or rb_last() with a pointer to the root
-of the tree, which will return a pointer to the node structure contained in
-the first or last element in the tree.  To continue, fetch the next or previous
-node by calling rb_next() or rb_prev() on the current node.  This will return
-NULL when there are no more nodes left.
-
-The iterator functions return a pointer to the embedded struct rb_node, from
-which the containing data structure may be accessed with the container_of()
-macro, and individual members may be accessed directly via
-rb_entry(node, type, member).
-
-Example::
-
-  struct rb_node *node;
-  for (node = rb_first(&mytree); node; node = rb_next(node))
-	printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
-
-Cached rbtrees
---------------
-
-Computing the leftmost (smallest) node is quite a common task for binary
-search trees, such as for traversals or users relying on a the particular
-order for their own logic. To this end, users can use 'struct rb_root_cached'
-to optimize O(logN) rb_first() calls to a simple pointer fetch avoiding
-potentially expensive tree iterations. This is done at negligible runtime
-overhead for maintanence; albeit larger memory footprint.
-
-Similar to the rb_root structure, cached rbtrees are initialized to be
-empty via::
-
-  struct rb_root_cached mytree = RB_ROOT_CACHED;
-
-Cached rbtree is simply a regular rb_root with an extra pointer to cache the
-leftmost node. This allows rb_root_cached to exist wherever rb_root does,
-which permits augmented trees to be supported as well as only a few extra
-interfaces::
-
-  struct rb_node *rb_first_cached(struct rb_root_cached *tree);
-  void rb_insert_color_cached(struct rb_node *, struct rb_root_cached *, bool);
-  void rb_erase_cached(struct rb_node *node, struct rb_root_cached *);
-
-Both insert and erase calls have their respective counterpart of augmented
-trees::
-
-  void rb_insert_augmented_cached(struct rb_node *node, struct rb_root_cached *,
-				  bool, struct rb_augment_callbacks *);
-  void rb_erase_augmented_cached(struct rb_node *, struct rb_root_cached *,
-				 struct rb_augment_callbacks *);
-
-
-Support for Augmented rbtrees
------------------------------
-
-Augmented rbtree is an rbtree with "some" additional data stored in
-each node, where the additional data for node N must be a function of
-the contents of all nodes in the subtree rooted at N. This data can
-be used to augment some new functionality to rbtree. Augmented rbtree
-is an optional feature built on top of basic rbtree infrastructure.
-An rbtree user who wants this feature will have to call the augmentation
-functions with the user provided augmentation callback when inserting
-and erasing nodes.
-
-C files implementing augmented rbtree manipulation must include
-<linux/rbtree_augmented.h> instead of <linux/rbtree.h>. Note that
-linux/rbtree_augmented.h exposes some rbtree implementations details
-you are not expected to rely on; please stick to the documented APIs
-there and do not include <linux/rbtree_augmented.h> from header files
-either so as to minimize chances of your users accidentally relying on
-such implementation details.
-
-On insertion, the user must update the augmented information on the path
-leading to the inserted node, then call rb_link_node() as usual and
-rb_augment_inserted() instead of the usual rb_insert_color() call.
-If rb_augment_inserted() rebalances the rbtree, it will callback into
-a user provided function to update the augmented information on the
-affected subtrees.
-
-When erasing a node, the user must call rb_erase_augmented() instead of
-rb_erase(). rb_erase_augmented() calls back into user provided functions
-to updated the augmented information on affected subtrees.
-
-In both cases, the callbacks are provided through struct rb_augment_callbacks.
-3 callbacks must be defined:
-
-- A propagation callback, which updates the augmented value for a given
-  node and its ancestors, up to a given stop point (or NULL to update
-  all the way to the root).
-
-- A copy callback, which copies the augmented value for a given subtree
-  to a newly assigned subtree root.
-
-- A tree rotation callback, which copies the augmented value for a given
-  subtree to a newly assigned subtree root AND recomputes the augmented
-  information for the former subtree root.
-
-The compiled code for rb_erase_augmented() may inline the propagation and
-copy callbacks, which results in a large function, so each augmented rbtree
-user should have a single rb_erase_augmented() call site in order to limit
-compiled code size.
-
-
-Sample usage
-^^^^^^^^^^^^
-
-Interval tree is an example of augmented rb tree. Reference -
-"Introduction to Algorithms" by Cormen, Leiserson, Rivest and Stein.
-More details about interval trees:
-
-Classical rbtree has a single key and it cannot be directly used to store
-interval ranges like [lo:hi] and do a quick lookup for any overlap with a new
-lo:hi or to find whether there is an exact match for a new lo:hi.
-
-However, rbtree can be augmented to store such interval ranges in a structured
-way making it possible to do efficient lookup and exact match.
-
-This "extra information" stored in each node is the maximum hi
-(max_hi) value among all the nodes that are its descendants. This
-information can be maintained at each node just be looking at the node
-and its immediate children. And this will be used in O(log n) lookup
-for lowest match (lowest start address among all possible matches)
-with something like::
-
-  struct interval_tree_node *
-  interval_tree_first_match(struct rb_root *root,
-			    unsigned long start, unsigned long last)
-  {
-	struct interval_tree_node *node;
-
-	if (!root->rb_node)
-		return NULL;
-	node = rb_entry(root->rb_node, struct interval_tree_node, rb);
-
-	while (true) {
-		if (node->rb.rb_left) {
-			struct interval_tree_node *left =
-				rb_entry(node->rb.rb_left,
-					 struct interval_tree_node, rb);
-			if (left->__subtree_last >= start) {
-				/*
-				 * Some nodes in left subtree satisfy Cond2.
-				 * Iterate to find the leftmost such node N.
-				 * If it also satisfies Cond1, that's the match
-				 * we are looking for. Otherwise, there is no
-				 * matching interval as nodes to the right of N
-				 * can't satisfy Cond1 either.
-				 */
-				node = left;
-				continue;
-			}
-		}
-		if (node->start <= last) {		/* Cond1 */
-			if (node->last >= start)	/* Cond2 */
-				return node;	/* node is leftmost match */
-			if (node->rb.rb_right) {
-				node = rb_entry(node->rb.rb_right,
-					struct interval_tree_node, rb);
-				if (node->__subtree_last >= start)
-					continue;
-			}
-		}
-		return NULL;	/* No match */
-	}
-  }
-
-Insertion/removal are defined using the following augmented callbacks::
-
-  static inline unsigned long
-  compute_subtree_last(struct interval_tree_node *node)
-  {
-	unsigned long max = node->last, subtree_last;
-	if (node->rb.rb_left) {
-		subtree_last = rb_entry(node->rb.rb_left,
-			struct interval_tree_node, rb)->__subtree_last;
-		if (max < subtree_last)
-			max = subtree_last;
-	}
-	if (node->rb.rb_right) {
-		subtree_last = rb_entry(node->rb.rb_right,
-			struct interval_tree_node, rb)->__subtree_last;
-		if (max < subtree_last)
-			max = subtree_last;
-	}
-	return max;
-  }
-
-  static void augment_propagate(struct rb_node *rb, struct rb_node *stop)
-  {
-	while (rb != stop) {
-		struct interval_tree_node *node =
-			rb_entry(rb, struct interval_tree_node, rb);
-		unsigned long subtree_last = compute_subtree_last(node);
-		if (node->__subtree_last == subtree_last)
-			break;
-		node->__subtree_last = subtree_last;
-		rb = rb_parent(&node->rb);
-	}
-  }
-
-  static void augment_copy(struct rb_node *rb_old, struct rb_node *rb_new)
-  {
-	struct interval_tree_node *old =
-		rb_entry(rb_old, struct interval_tree_node, rb);
-	struct interval_tree_node *new =
-		rb_entry(rb_new, struct interval_tree_node, rb);
-
-	new->__subtree_last = old->__subtree_last;
-  }
-
-  static void augment_rotate(struct rb_node *rb_old, struct rb_node *rb_new)
-  {
-	struct interval_tree_node *old =
-		rb_entry(rb_old, struct interval_tree_node, rb);
-	struct interval_tree_node *new =
-		rb_entry(rb_new, struct interval_tree_node, rb);
-
-	new->__subtree_last = old->__subtree_last;
-	old->__subtree_last = compute_subtree_last(old);
-  }
-
-  static const struct rb_augment_callbacks augment_callbacks = {
-	augment_propagate, augment_copy, augment_rotate
-  };
-
-  void interval_tree_insert(struct interval_tree_node *node,
-			    struct rb_root *root)
-  {
-	struct rb_node **link = &root->rb_node, *rb_parent = NULL;
-	unsigned long start = node->start, last = node->last;
-	struct interval_tree_node *parent;
-
-	while (*link) {
-		rb_parent = *link;
-		parent = rb_entry(rb_parent, struct interval_tree_node, rb);
-		if (parent->__subtree_last < last)
-			parent->__subtree_last = last;
-		if (start < parent->start)
-			link = &parent->rb.rb_left;
-		else
-			link = &parent->rb.rb_right;
-	}
-
-	node->__subtree_last = last;
-	rb_link_node(&node->rb, rb_parent, link);
-	rb_insert_augmented(&node->rb, root, &augment_callbacks);
-  }
-
-  void interval_tree_remove(struct interval_tree_node *node,
-			    struct rb_root *root)
-  {
-	rb_erase_augmented(&node->rb, root, &augment_callbacks);
-  }
diff --git a/Documentation/s390/index.rst b/Documentation/s390/index.rst
index f7af2061e406..cf71df5776b4 100644
--- a/Documentation/s390/index.rst
+++ b/Documentation/s390/index.rst
@@ -15,6 +15,7 @@ s390 Architecture
     vfio-ccw
     zfcpdump
     common_io
+    pci
 
     text_files
 
diff --git a/Documentation/s390/pci.rst b/Documentation/s390/pci.rst
new file mode 100644
index 000000000000..75e043d4da85
--- /dev/null
+++ b/Documentation/s390/pci.rst
@@ -0,0 +1,126 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========
+S/390 PCI
+=========
+
+Authors:
+        - Pierre Morel
+
+Copyright, IBM Corp. 2020
+
+
+command line parameters and debugfs entries
+===========================================
+
+Command line parameters
+-----------------------
+
+* nomio
+
+  Do not use MIO instructions.
+
+* norid
+
+  Ignore the RID field and force use of one PCI domain per PCI function.
+
+debugfs entries
+---------------
+
+* /sys/kernel/debug/s390dbf/pci_*/ (S/390 debug feature)
+
+  Some views generated by the debug feature to hold various debug outputs.
+
+  - /sys/kernel/debug/s390dbf/pci_msg/sprintf
+    Messages from the processing of PCI events like machine check handling
+    and setting of global functionality like UID checking.
+
+  The level of logging can be changed to be more or less verbose by piping to
+  /sys/kernel/debug/s390dbf/pci_*/level a number between 0 and 6; see the
+  documentation on the S/390 debug feature (Documentation/s390/s390dbf.rst)
+  for details.
+
+Sysfs entries
+=============
+
+Specific entries, or entries specificities for zPCI functions.
+
+* /sys/bus/pci/slots/XXXXXXXX
+
+  The slot entries are setup using the FID (Function Identifier) of the
+  PCI function.
+
+  - /sys/bus/pci/slots/XXXXXXXX/power
+
+  A physical function currently supporting virtual function can not be
+  powered-off until all virtual-function have been removed with
+  echo 0 > /sys/bus/pci/devices/XXXX:XX:XX.X/sriov_numvf
+
+* /sys/bus/pci/devices/XXXX:XX:XX.X/
+
+  - function_id
+    zPCI function identifier unique for the complete Z System.
+    It define uniquely a function in the system.
+
+  - function_handle
+    Low level identifier used for a configured PCI function.
+    It may be useful for debuging.
+
+  - pchid
+    Model dependent location of the I/O adapter.
+
+  - pfgid
+    PCI Function Group ID, functions sharing identical functionality
+    are using a common identifier.
+    A PCI group defines interrupts, IOMMU, IOTLB and DMA specifics.
+
+  - vfn
+    The Virtual Function Number, from 1 to N for virtual functions.
+    0 for physical functions.
+
+  - pft
+    PCI function type specifies the type of the PCI function.
+
+  - port
+    The port correspond to the physical port the function is attached to.
+    It also gives an indication on the physical function a virtual function
+    is attached to.
+
+  - uid
+    The UID, Unique Identifier is defined when configuring a LPAR and is
+    unique inside an LPAR.
+
+  - pfip/segmentX
+    The segments are used to determine the isolation of a function.
+    They corresponds to the physical path to the function.
+    The more the segment are different the more the functions are isolated.
+
+Enumeration and hotplug
+=======================
+
+The PCI address is made of 4 parts: domain, bus, device and function,
+like in DDDD:BB:dd.f
+
+* When not using multi-functions (norid is set or firmware does not support
+  multi-functions)
+
+  - There is only one function per domain.
+
+  - the domain is set from the zPCI function's UID as defined during the
+    LPAR creation.
+
+  - Addresses look like DDDD:00:00.0
+
+* When using multi-functions (norid parameter is not set), there are some
+  change in the way zPCI functions are addressed:
+
+  - There is still only one bus per domain.
+
+  - There can be up to 256 functions per bus.
+
+  - The domain part of the address of all functions of all functions for
+    a multi-Function device is set from the zPCI function's UID as defined
+    in the LPAR creation for the function zero.
+
+  - New functions will only be ready to be used after the function zero
+    (the function with devfn 0) has been enumerated.
diff --git a/Documentation/scheduler/sched-domains.rst b/Documentation/scheduler/sched-domains.rst
index f7504226f445..5c4b7f4f0062 100644
--- a/Documentation/scheduler/sched-domains.rst
+++ b/Documentation/scheduler/sched-domains.rst
@@ -19,10 +19,12 @@ CPUs".
 Each scheduling domain must have one or more CPU groups (struct sched_group)
 which are organised as a circular one way linked list from the ->groups
 pointer. The union of cpumasks of these groups MUST be the same as the
-domain's span. The intersection of cpumasks from any two of these groups
-MUST be the empty set. The group pointed to by the ->groups pointer MUST
-contain the CPU to which the domain belongs. Groups may be shared among
-CPUs as they contain read only data after they have been set up.
+domain's span. The group pointed to by the ->groups pointer MUST contain the CPU
+to which the domain belongs. Groups may be shared among CPUs as they contain
+read only data after they have been set up. The intersection of cpumasks from
+any two of these groups may be non empty. If this is the case the SD_OVERLAP
+flag is set on the corresponding scheduling domain and its groups may not be
+shared between CPUs.
 
 Balancing within a sched domain occurs between groups. That is, each group
 is treated as one entity. The load of a group is defined as the sum of the
diff --git a/Documentation/security/keys/core.rst b/Documentation/security/keys/core.rst
index d9b0b859018b..0154721b20b2 100644
--- a/Documentation/security/keys/core.rst
+++ b/Documentation/security/keys/core.rst
@@ -833,6 +833,7 @@ The keyctl syscall functions are:
      A process must have search permission on the key for this function to be
      successful.
 
+
   *  Compute a Diffie-Hellman shared secret or public key::
 
 	long keyctl(KEYCTL_DH_COMPUTE, struct keyctl_dh_params *params,
@@ -1026,6 +1027,63 @@ The keyctl syscall functions are:
      written into the output buffer.  Verification returns 0 on success.
 
 
+  *  Watch a key or keyring for changes::
+
+	long keyctl(KEYCTL_WATCH_KEY, key_serial_t key, int queue_fd,
+		    const struct watch_notification_filter *filter);
+
+     This will set or remove a watch for changes on the specified key or
+     keyring.
+
+     "key" is the ID of the key to be watched.
+
+     "queue_fd" is a file descriptor referring to an open "/dev/watch_queue"
+     which manages the buffer into which notifications will be delivered.
+
+     "filter" is either NULL to remove a watch or a filter specification to
+     indicate what events are required from the key.
+
+     See Documentation/watch_queue.rst for more information.
+
+     Note that only one watch may be emplaced for any particular { key,
+     queue_fd } combination.
+
+     Notification records look like::
+
+	struct key_notification {
+		struct watch_notification watch;
+		__u32	key_id;
+		__u32	aux;
+	};
+
+     In this, watch::type will be "WATCH_TYPE_KEY_NOTIFY" and subtype will be
+     one of::
+
+	NOTIFY_KEY_INSTANTIATED
+	NOTIFY_KEY_UPDATED
+	NOTIFY_KEY_LINKED
+	NOTIFY_KEY_UNLINKED
+	NOTIFY_KEY_CLEARED
+	NOTIFY_KEY_REVOKED
+	NOTIFY_KEY_INVALIDATED
+	NOTIFY_KEY_SETATTR
+
+     Where these indicate a key being instantiated/rejected, updated, a link
+     being made in a keyring, a link being removed from a keyring, a keyring
+     being cleared, a key being revoked, a key being invalidated or a key
+     having one of its attributes changed (user, group, perm, timeout,
+     restriction).
+
+     If a watched key is deleted, a basic watch_notification will be issued
+     with "type" set to WATCH_TYPE_META and "subtype" set to
+     watch_meta_removal_notification.  The watchpoint ID will be set in the
+     "info" field.
+
+     This needs to be configured by enabling:
+
+	"Provide key/keyring change notifications" (KEY_NOTIFICATIONS)
+
+
 Kernel Services
 ===============
 
diff --git a/Documentation/sphinx/requirements.txt b/Documentation/sphinx/requirements.txt
index 14e29a0ae480..489f6626de67 100644
--- a/Documentation/sphinx/requirements.txt
+++ b/Documentation/sphinx/requirements.txt
@@ -1,3 +1,3 @@
 docutils
-Sphinx==1.7.9
+Sphinx==2.4.4
 sphinx_rtd_theme
diff --git a/Documentation/trace/coresight/coresight-ect.rst b/Documentation/trace/coresight/coresight-ect.rst
index ecc1e57012ef..a68732c5c6d6 100644
--- a/Documentation/trace/coresight/coresight-ect.rst
+++ b/Documentation/trace/coresight/coresight-ect.rst
@@ -1,4 +1,5 @@
 .. SPDX-License-Identifier: GPL-2.0
+
 =============================================
 CoreSight Embedded Cross Trigger (CTI & CTM).
 =============================================
@@ -72,7 +73,7 @@ capable of generating or using trigger signals.::
 
   >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0
   channels  ctmid  enable  nr_trigger_cons mgmt  power powered  regs
-  subsystem triggers0 triggers1  uevent
+  connections subsystem triggers0 triggers1  uevent
 
 *Key file items are:-*
    * ``enable``: enables/disables the CTI. Read to determine current state.
@@ -88,6 +89,9 @@ capable of generating or using trigger signals.::
    * ``channels``: Contains the channel API - CTI main programming interface.
    * ``regs``: Gives access to the raw programmable CTI regs.
    * ``mgmt``: the standard CoreSight management registers.
+   * ``connections``: Links to connected *CoreSight* devices. The number of
+     links can be 0 to ``nr_trigger_cons``. Actual number given by ``nr_links``
+     in this directory.
 
 
 triggers<N> directories
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst
index 108600ee1e12..0b73acb44efa 100644
--- a/Documentation/trace/coresight/coresight.rst
+++ b/Documentation/trace/coresight/coresight.rst
@@ -241,6 +241,91 @@ to the newer scheme, to give a confirmation that what you see on your
 system is not unexpected. One must use the "names" as they appear on
 the system under specified locations.
 
+Topology Representation
+-----------------------
+
+Each CoreSight component has a ``connections`` directory which will contain
+links to other CoreSight components. This allows the user to explore the trace
+topology and for larger systems, determine the most appropriate sink for a
+given source. The connection information can also be used to establish
+which CTI devices are connected to a given component. This directory contains a
+``nr_links`` attribute detailing the number of links in the directory.
+
+For an ETM source, in this case ``etm0`` on a Juno platform, a typical
+arrangement will be::
+
+  linaro-developer:~# ls - l /sys/bus/coresight/devices/etm0/connections
+  <file details>  cti_cpu0 -> ../../../23020000.cti/cti_cpu0
+  <file details>  nr_links
+  <file details>  out:0 -> ../../../230c0000.funnel/funnel2
+
+Following the out port to ``funnel2``::
+
+  linaro-developer:~# ls -l /sys/bus/coresight/devices/funnel2/connections
+  <file details> in:0 -> ../../../23040000.etm/etm0
+  <file details> in:1 -> ../../../23140000.etm/etm3
+  <file details> in:2 -> ../../../23240000.etm/etm4
+  <file details> in:3 -> ../../../23340000.etm/etm5
+  <file details> nr_links
+  <file details> out:0 -> ../../../20040000.funnel/funnel0
+
+And again to ``funnel0``::
+
+  linaro-developer:~# ls -l /sys/bus/coresight/devices/funnel0/connections
+  <file details> in:0 -> ../../../220c0000.funnel/funnel1
+  <file details> in:1 -> ../../../230c0000.funnel/funnel2
+  <file details> nr_links
+  <file details> out:0 -> ../../../20010000.etf/tmc_etf0
+
+Finding the first sink ``tmc_etf0``. This can be used to collect data
+as a sink, or as a link to propagate further along the chain::
+
+  linaro-developer:~# ls -l /sys/bus/coresight/devices/tmc_etf0/connections
+  <file details> cti_sys0 -> ../../../20020000.cti/cti_sys0
+  <file details> in:0 -> ../../../20040000.funnel/funnel0
+  <file details> nr_links
+  <file details> out:0 -> ../../../20150000.funnel/funnel4
+
+via ``funnel4``::
+
+  linaro-developer:~# ls -l /sys/bus/coresight/devices/funnel4/connections
+  <file details> in:0 -> ../../../20010000.etf/tmc_etf0
+  <file details> in:1 -> ../../../20140000.etf/tmc_etf1
+  <file details> nr_links
+  <file details> out:0 -> ../../../20120000.replicator/replicator0
+
+and a ``replicator0``::
+
+  linaro-developer:~# ls -l /sys/bus/coresight/devices/replicator0/connections
+  <file details> in:0 -> ../../../20150000.funnel/funnel4
+  <file details> nr_links
+  <file details> out:0 -> ../../../20030000.tpiu/tpiu0
+  <file details> out:1 -> ../../../20070000.etr/tmc_etr0
+
+Arriving at the final sink in the chain, ``tmc_etr0``::
+
+  linaro-developer:~# ls -l /sys/bus/coresight/devices/tmc_etr0/connections
+  <file details> cti_sys0 -> ../../../20020000.cti/cti_sys0
+  <file details> in:0 -> ../../../20120000.replicator/replicator0
+  <file details> nr_links
+
+As described below, when using sysfs it is sufficient to enable a sink and
+a source for successful trace. The framework will correctly enable all
+intermediate links as required.
+
+Note: ``cti_sys0`` appears in two of the connections lists above.
+CTIs can connect to multiple devices and are arranged in a star topology
+via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details.
+Looking at this device we see 4 connections::
+
+  linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections
+  <file details> nr_links
+  <file details> stm0 -> ../../../20100000.stm/stm0
+  <file details> tmc_etf0 -> ../../../20010000.etf/tmc_etf0
+  <file details> tmc_etr0 -> ../../../20070000.etr/tmc_etr0
+  <file details> tpiu0 -> ../../../20030000.tpiu/tpiu0
+
+
 How to use the tracer modules
 -----------------------------
 
diff --git a/Documentation/translations/it_IT/doc-guide/parse-headers.rst b/Documentation/translations/it_IT/doc-guide/parse-headers.rst
index b38918ca637e..993d549ee2b8 100644
--- a/Documentation/translations/it_IT/doc-guide/parse-headers.rst
+++ b/Documentation/translations/it_IT/doc-guide/parse-headers.rst
@@ -17,7 +17,7 @@ con le modifiche del kernel.
 Il programma :ref:`parse_headers.pl <it_parse_headers>` genera questi riferimenti.
 Esso dev'essere invocato attraverso un Makefile, mentre si genera la
 documentazione. Per avere un esempio su come utilizzarlo all'interno del kernel
-consultate ``Documentation/media/Makefile``.
+consultate ``Documentation/userspace-api/media/Makefile``.
 
 .. _it_parse_headers:
 
diff --git a/Documentation/translations/it_IT/process/adding-syscalls.rst b/Documentation/translations/it_IT/process/adding-syscalls.rst
index c3a3439595a6..bff0a82bf127 100644
--- a/Documentation/translations/it_IT/process/adding-syscalls.rst
+++ b/Documentation/translations/it_IT/process/adding-syscalls.rst
@@ -39,7 +39,7 @@ vostra interfaccia.
        un qualche modo opaca.
 
  - Se dovete esporre solo delle informazioni sul sistema, un nuovo nodo in
-   sysfs (vedere ``Documentation/filesystems/sysfs.txt``) o
+   sysfs (vedere ``Documentation/filesystems/sysfs.rst``) o
    in procfs potrebbe essere sufficiente.  Tuttavia, l'accesso a questi
    meccanismi richiede che il filesystem sia montato, il che potrebbe non
    essere sempre vero (per esempio, in ambienti come namespace/sandbox/chroot).
diff --git a/Documentation/translations/it_IT/process/email-clients.rst b/Documentation/translations/it_IT/process/email-clients.rst
index 224ab031ffd3..89abf6d325f2 100644
--- a/Documentation/translations/it_IT/process/email-clients.rst
+++ b/Documentation/translations/it_IT/process/email-clients.rst
@@ -1,12 +1,334 @@
 .. include:: ../disclaimer-ita.rst
 
-:Original: :ref:`Documentation/process/email-clients.rst <email_clients>`
-
-.. _it_email_clients:
+:Original: :doc:`../../../process/email-clients`
+:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it>
 
 Informazioni sui programmi di posta elettronica per Linux
 =========================================================
 
-.. warning::
+Git
+---
+
+Oggigiorno, la maggior parte degli sviluppatori utilizza ``git send-email``
+al posto dei classici programmi di posta elettronica.  Le pagine man sono
+abbastanza buone. Dal lato del ricevente, i manutentori utilizzano ``git am``
+per applicare le patch.
+
+Se siete dei novelli utilizzatori di ``git`` allora inviate la patch a voi
+stessi. Salvatela come testo includendo tutte le intestazioni. Poi eseguite
+il comando ``git am messaggio-formato-testo.txt`` e revisionatene il risultato
+con ``git log``. Quando tutto funziona correttamente, allora potete inviare
+la patch alla lista di discussione più appropriata.
+
+Panoramica delle opzioni
+------------------------
+
+Le patch per il kernel vengono inviate per posta elettronica, preferibilmente
+come testo integrante del messaggio.  Alcuni manutentori accettano gli
+allegati, ma in questo caso gli allegati devono avere il *content-type*
+impostato come ``text/plain``.  Tuttavia, generalmente gli allegati non sono
+ben apprezzati perché rende più difficile citare porzioni di patch durante il
+processo di revisione.
+
+I programmi di posta elettronica che vengono usati per inviare le patch per il
+kernel Linux dovrebbero inviarle senza alterazioni.  Per esempio, non
+dovrebbero modificare o rimuovere tabulazioni o spazi, nemmeno all'inizio o
+alla fine delle righe.
+
+Non inviate patch con ``format=flowed``.  Questo potrebbe introdurre
+interruzioni di riga inaspettate e indesiderate.
+
+Non lasciate che il vostro programma di posta vada a capo automaticamente.
+Questo può corrompere le patch.
+
+I programmi di posta non dovrebbero modificare la codifica dei caratteri nel
+testo.  Le patch inviate per posta elettronica dovrebbero essere codificate in
+ASCII o UTF-8.
+Se configurate il vostro programma per inviare messaggi codificati con UTF-8
+eviterete possibili problemi di codifica.
+
+I programmi di posta dovrebbero generare e mantenere le intestazioni
+"References" o "In-Reply-To:" cosicché la discussione non venga interrotta.
+
+Di solito, il copia-e-incolla (o taglia-e-incolla) non funziona con le patch
+perché le tabulazioni vengono convertite in spazi.  Usando xclipboard, xclip
+e/o xcutsel potrebbe funzionare, ma è meglio che lo verifichiate o meglio
+ancora: non usate il copia-e-incolla.
+
+Non usate firme PGP/GPG nei messaggi che contengono delle patch.  Questo
+impedisce il corretto funzionamento di alcuni script per leggere o applicare
+patch (questo si dovrebbe poter correggere).
+
+Prima di inviare le patch sulle liste di discussione Linux, può essere una
+buona idea quella di inviare la patch a voi stessi, salvare il messaggio
+ricevuto, e applicarlo ai sorgenti con successo.
+
+
+Alcuni suggerimenti per i programmi di posta elettronica (MUA)
+--------------------------------------------------------------
+
+Qui troverete alcuni suggerimenti per configurare i vostri MUA allo scopo
+di modificare ed inviare patch per il kernel Linux.  Tuttavia, questi
+suggerimenti non sono da considerarsi come un riassunto di una configurazione
+completa.
+
+Legenda:
+
+- TUI = interfaccia utente testuale (*text-based user interface*)
+- GUI = interfaccia utente grafica (*graphical user interface*)
+
+Alpine (TUI)
+************
+
+Opzioni per la configurazione:
+
+Nella sezione :menuselection:`Sending Preferences`:
+
+- :menuselection:`Do Not Send Flowed Text` deve essere ``enabled``
+- :menuselection:`Strip Whitespace Before Sending` deve essere ``disabled``
+
+Quando state scrivendo un messaggio, il cursore dev'essere posizionato
+dove volete che la patch inizi, poi premendo :kbd:`CTRL-R` vi verrà chiesto
+di selezionare il file patch da inserire nel messaggio.
+
+Claws Mail (GUI)
+****************
+
+Funziona. Alcune persone riescono ad usarlo con successo per inviare le patch.
+
+Per inserire una patch usate :menuselection:`Messaggio-->Inserisci file`
+(:kbd:`CTRL-I`) oppure un editor esterno.
+
+Se la patch che avete inserito dev'essere modificata usato la finestra di
+scrittura di Claws, allora assicuratevi che l'"auto-interruzione" sia
+disabilitata :menuselection:`Configurazione-->Preferenze-->Composizione-->Interruzione riga`.
+
+Evolution (GUI)
+***************
+
+Alcune persone riescono ad usarlo con successo per inviare le patch.
+
+Quando state scrivendo una lettera selezionate: Preformattato
+  da :menuselection:`Formato-->Stile del paragrafo-->Preformattato`
+  (:kbd:`CTRL-7`) o dalla barra degli strumenti
+
+Poi per inserire la patch usate:
+:menuselection:`Inserisci--> File di testo...` (:kbd:`ALT-N x`)
+
+Potete anche eseguire ``diff -Nru old.c new.c | xclip``, selezionare
+:menuselection:`Preformattato`, e poi usare il tasto centrale del mouse.
+
+Kmail (GUI)
+***********
+
+Alcune persone riescono ad usarlo con successo per inviare le patch.
+
+La configurazione base che disabilita la composizione di messaggi HTML è
+corretta; non abilitatela.
+
+Quando state scrivendo un messaggio, nel menu opzioni, togliete la selezione a
+"A capo automatico". L'unico svantaggio sarà che qualsiasi altra cosa scriviate
+nel messaggio non verrà mandata a capo in automatico ma dovrete farlo voi.
+Il modo più semplice per ovviare a questo problema è quello di scrivere il
+messaggio con l'opzione abilitata e poi di salvarlo nelle bozze. Riaprendo ora
+il messaggio dalle bozze le andate a capo saranno parte integrante del
+messaggio, per cui togliendo l'opzione "A capo automatico" non perderete nulla.
+
+Alla fine del vostro messaggio, appena prima di inserire la vostra patch,
+aggiungete il delimitatore di patch: tre trattini (``---``).
+
+Ora, dal menu :menuselection:`Messaggio`, selezionate :menuselection:`Inserisci file di testo...`
+quindi scegliete la vostra patch.
+Come soluzione aggiuntiva potreste personalizzare la vostra barra degli
+strumenti aggiungendo un'icona per :menuselection:`Inserisci file di testo...`.
+
+Allargate la finestra di scrittura abbastanza da evitare andate a capo.
+Questo perché in Kmail 1.13.5 (KDE 4.5.4), Kmail aggiunge andate a capo
+automaticamente al momento dell'invio per tutte quelle righe che graficamente,
+nella vostra finestra di composizione, si sono estete su una riga successiva.
+Disabilitare l'andata a capo automatica non è sufficiente. Dunque, se la vostra
+patch contiene delle righe molto lunghe, allora dovrete allargare la finestra
+di composizione per evitare che quelle righe vadano a capo. Vedere:
+https://bugs.kde.org/show_bug.cgi?id=174034
+
+Potete firmare gli allegati con GPG, ma per le patch si preferisce aggiungerle
+al testo del messaggio per cui non usate la firma GPG.  Firmare le patch
+inserite come testo del messaggio le rende più difficili da estrarre dalla loro
+codifica a 7-bit.
+
+Se dovete assolutamente inviare delle patch come allegati invece di integrarle
+nel testo del messaggio, allora premete il tasto destro sull'allegato e
+selezionate :menuselection:`Proprietà`, e poi attivate
+:menuselection:`Suggerisci visualizzazione automatica` per far si che
+l'allegato sia più leggibile venendo visualizzato come parte del messaggio.
+
+Per salvare le patch inviate come parte di un messaggio, selezionate il
+messaggio che la contiene, premete il tasto destro e selezionate
+:menuselection:`Salva come`. Se il messaggio fu ben preparato, allora potrete
+usarlo interamente senza alcuna modifica.
+I messaggi vengono salvati con permessi di lettura-scrittura solo per l'utente,
+nel caso in cui vogliate copiarli altrove per renderli disponibili ad altri
+gruppi o al mondo, ricordatevi di usare ``chmod`` per cambiare i permessi.
+
+Lotus Notes (GUI)
+*****************
+
+Scappate finché potete.
+
+IBM Verse (Web GUI)
+*******************
+
+Vedi il commento per Lotus Notes.
+
+Mutt (TUI)
+**********
+
+Un sacco di sviluppatori Linux usano ``mutt``, per cui deve funzionare
+abbastanza bene.
+
+Mutt non ha un proprio editor, quindi qualunque sia il vostro editor dovrete
+configurarlo per non aggiungere automaticamente le andate a capo.  Molti
+editor hanno un'opzione :menuselection:`Inserisci file` che inserisce il
+contenuto di un file senza alterarlo.
+
+Per usare ``vim`` come editor per mutt::
+
+  set editor="vi"
+
+Se per inserire la patch nel messaggio usate xclip, scrivete il comando::
+
+  :set paste
+
+prima di premere il tasto centrale o shift-insert. Oppure usate il
+comando::
+
+  :r filename
+
+(a)llega funziona bene senza ``set paste``
+
+Potete generare le patch con ``git format-patch`` e usare Mutt per inviarle::
+
+    $ mutt -H 0001-some-bug-fix.patch
+
+Opzioni per la configurazione:
+
+Tutto dovrebbe funzionare già nella configurazione base.
+Tuttavia, è una buona idea quella di impostare ``send_charset``::
+
+   set send_charset="us-ascii:utf-8"
+
+Mutt è molto personalizzabile. Qui di seguito trovate la configurazione minima
+per iniziare ad usare Mutt per inviare patch usando Gmail::
+
+  # .muttrc
+  # ================  IMAP ====================
+  set imap_user = 'yourusername@gmail.com'
+  set imap_pass = 'yourpassword'
+  set spoolfile = imaps://imap.gmail.com/INBOX
+  set folder = imaps://imap.gmail.com/
+  set record="imaps://imap.gmail.com/[Gmail]/Sent Mail"
+  set postponed="imaps://imap.gmail.com/[Gmail]/Drafts"
+  set mbox="imaps://imap.gmail.com/[Gmail]/All Mail"
+
+  # ================  SMTP  ====================
+  set smtp_url = "smtp://username@smtp.gmail.com:587/"
+  set smtp_pass = $imap_pass
+  set ssl_force_tls = yes # Require encrypted connection
+
+  # ================  Composition  ====================
+  set editor = `echo \$EDITOR`
+  set edit_headers = yes  # See the headers when editing
+  set charset = UTF-8     # value of $LANG; also fallback for send_charset
+  # Sender, email address, and sign-off line must match
+  unset use_domain        # because joe@localhost is just embarrassing
+  set realname = "YOUR NAME"
+  set from = "username@gmail.com"
+  set use_from = yes
+
+La documentazione di Mutt contiene molte più informazioni:
+
+    https://gitlab.com/muttmua/mutt/-/wikis/UseCases/Gmail
+
+    http://www.mutt.org/doc/manual/
+
+Pine (TUI)
+**********
+
+Pine aveva alcuni problemi con gli spazi vuoti, ma questi dovrebbero essere
+stati risolti.
+
+Se potete usate alpine (il successore di pine).
+
+Opzioni di configurazione:
+
+- Nelle versioni più recenti è necessario avere ``quell-flowed-text``
+- l'opzione ``no-strip-whitespace-before-send`` è necessaria
+
+Sylpheed (GUI)
+**************
+
+- funziona bene per aggiungere testo in linea (o usando allegati)
+- permette di utilizzare editor esterni
+- è lento su cartelle grandi
+- non farà l'autenticazione TSL SMTP su una connessione non SSL
+- ha un utile righello nella finestra di scrittura
+- la rubrica non comprende correttamente il nome da visualizzare e
+  l'indirizzo associato
+
+Thunderbird (GUI)
+*****************
+
+Thunderbird è un clone di Outlook a cui piace maciullare il testo, ma esistono
+modi per impedirglielo.
+
+- permettere l'uso di editor esterni:
+  La cosa più semplice da fare con Thunderbird e le patch è quello di usare
+  l'estensione "external editor" e di usare il vostro ``$EDITOR`` preferito per
+  leggere/includere patch nel vostro messaggio.  Per farlo, scaricate ed
+  installate l'estensione e aggiungete un bottone per chiamarla rapidamente
+  usando :menuselection:`Visualizza-->Barra degli strumenti-->Personalizza...`;
+  una volta fatto potrete richiamarlo premendo sul bottone mentre siete nella
+  finestra :menuselection:`Scrivi`
+
+  Tenete presente che "external editor" richiede che il vostro editor non
+  faccia alcun fork, in altre parole, l'editor non deve ritornare prima di
+  essere stato chiuso.  Potreste dover passare dei parametri aggiuntivi al
+  vostro editor oppure cambiargli la configurazione.  Per esempio, usando
+  gvim dovrete aggiungere l'opzione -f ``/usr/bin/gvim -f`` (Se il binario
+  si trova in ``/usr/bin``) nell'apposito campo nell'interfaccia di
+  configurazione di  :menuselection:`external editor`.  Se usate altri editor
+  consultate il loro  manuale per sapere come configurarli.
+
+Per rendere l'editor interno un po' più sensato, fate così:
+
+- Modificate le impostazioni di Thunderbird per far si che non usi
+  ``format=flowed``. Andate in :menuselection:`Modifica-->Preferenze-->Avanzate-->Editor di configurazione`
+  per invocare il registro delle impostazioni.
+
+- impostate ``mailnews.send_plaintext_flowed`` a ``false``
+
+- impostate ``mailnews.wraplength`` da ``72`` a ``0``
+
+- :menuselection:`Visualizza-->Corpo del messaggio come-->Testo semplice`
+
+- :menuselection:`Visualizza-->Codifica del testo-->Unicode`
+
+
+TkRat (GUI)
+***********
+
+Funziona. Usare "Inserisci file..." o un editor esterno.
+
+Gmail (Web GUI)
+***************
+
+Non funziona per inviare le patch.
+
+Il programma web Gmail converte automaticamente i tab in spazi.
+
+Allo stesso tempo aggiunge andata a capo ogni 78 caratteri. Comunque
+il problema della conversione fra spazi e tab può essere risolto usando
+un editor esterno.
 
-    TODO ancora da tradurre
+Un altro problema è che Gmail usa la codifica base64 per tutti quei messaggi
+che contengono caratteri non ASCII. Questo include cose tipo i nomi europei.
diff --git a/Documentation/translations/it_IT/process/index.rst b/Documentation/translations/it_IT/process/index.rst
index 012de0f3154a..c4c867132c88 100644
--- a/Documentation/translations/it_IT/process/index.rst
+++ b/Documentation/translations/it_IT/process/index.rst
@@ -59,6 +59,7 @@ perché non si è trovato un posto migliore.
    magic-number
    volatile-considered-harmful
    clang-format
+   ../riscv/patch-acceptance
 
 .. only::  subproject and html
 
diff --git a/Documentation/translations/it_IT/process/management-style.rst b/Documentation/translations/it_IT/process/management-style.rst
index 07e68bfb8402..c709285138a7 100644
--- a/Documentation/translations/it_IT/process/management-style.rst
+++ b/Documentation/translations/it_IT/process/management-style.rst
@@ -1,12 +1,293 @@
 .. include:: ../disclaimer-ita.rst
 
-:Original: :ref:`Documentation/process/management-style.rst <managementstyle>`
+:Original: :doc:`../../../process/management-style`
+:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it>
 
-.. _it_managementstyle:
+Il modello di gestione del kernel Linux
+=======================================
 
-Tipo di gestione del kernel Linux
-=================================
+Questo breve documento descrive il modello di gestione del kernel Linux.
+Per certi versi, esso rispecchia il documento
+:ref:`translations/it_IT/process/coding-style.rst <it_codingstyle>`,
+ed è principalmente scritto per evitare di rispondere [#f1]_ in continuazione
+alle stesse identiche (o quasi) domande.
 
-.. warning::
+Il modello di gestione è qualcosa di molto personale e molto più difficile da
+qualificare rispetto a delle semplici regole di codifica, quindi questo
+documento potrebbe avere più o meno a che fare con la realtà.  È cominciato
+come un gioco, ma ciò non significa che non possa essere vero.
+Lo dovrete decidere voi stessi.
 
-    TODO ancora da tradurre
+In ogni caso, quando si parla del "dirigente del kernel", ci si riferisce
+sempre alla persona che dirige tecnicamente, e non a coloro che
+tradizionalmente hanno un ruolo direttivo all'interno delle aziende.  Se vi
+occupate di convalidare acquisti o avete una qualche idea sul budget del vostro
+gruppo, probabilmente non siete un dirigente del kernel.  Quindi i suggerimenti
+qui indicati potrebbero fare al caso vostro, oppure no.
+
+Prima di tutto, suggerirei di acquistare "Le sette regole per avere successo",
+e di non leggerlo. Bruciatelo, è un grande gesto simbolico.
+
+.. [#f1] Questo documento non fa molto per risponde alla domanda, ma rende
+	 così dannatamente ovvio a chi la pone che non abbiamo la minima idea
+	 di come rispondere.
+
+Comunque, partiamo:
+
+.. _it_decisions:
+
+1) Le decisioni
+---------------
+
+Tutti pensano che i dirigenti decidano, e che questo prendere decisioni
+sia importante.  Più grande e dolorosa è la decisione, più importante deve
+essere il dirigente che la prende.  Questo è molto profondo ed ovvio, ma non è
+del tutto vero.
+
+Il gioco consiste nell'"evitare" di dover prendere decisioni.  In particolare
+se qualcuno vi chiede di "Decidere" tra (a) o (b), e vi dice che ha
+davvero bisogno di voi per questo, come dirigenti siete nei guai.
+Le persone che gestite devono conoscere i dettagli più di quanto li conosciate
+voi, quindi se vengono da voi per una decisione tecnica, siete fottuti.
+Non sarete chiaramente competente per prendere quella decisione per loro.
+
+(Corollario: se le persone che gestite non conoscono i dettagli meglio di voi,
+anche in questo caso sarete fregati, tuttavia per altre ragioni.  Ossia state
+facendo il lavoro sbagliato, e che invece dovrebbero essere "loro" a gestirvi)
+
+Quindi il gioco si chiama "evitare" decisioni, almeno le più grandi e
+difficili.  Prendere decisioni piccoli e senza conseguenze va bene, e vi fa
+sembrare competenti in quello che state facendo, quindi quello che un dirigente
+del kernel ha bisogno di fare è trasformare le decisioni grandi e difficili
+in minuzie delle quali nessuno importa.
+
+Ciò aiuta a capire che la differenza chiave tra una grande decisione ed una
+piccola sta nella possibilità di modificare tale decisione in seguito.
+Qualsiasi decisione importante può essere ridotta in decisioni meno importanti,
+ma dovete assicurarvi che possano essere reversibili in caso di errori
+(presenti o futuri).  Improvvisamente, dovrete essere doppiamente dirigenti
+per **due** decisioni non sequenziali - quella sbagliata **e** quella giusta.
+
+E le persone vedranno tutto ciò come prova di vera capacità di comando
+(*cough* cavolata *cough*)
+
+Così la chiave per evitare le decisioni difficili diviene l'evitare
+di fare cose che non possono essere disfatte.  Non infilatevi in un angolo
+dal quale non potrete sfuggire.  Un topo messo all'angolo può rivelarsi
+pericoloso - un dirigente messo all'angolo è solo pietoso.
+
+**In ogni caso** dato che nessuno è stupido al punto da lasciare veramente ad
+un dirigente del kernel un enorme responsabilità, solitamente è facile fare
+marcia indietro. Annullare una decisione è molto facile: semplicemente dite a
+tutti che siete stati degli scemi incompetenti, dite che siete dispiaciuti, ed
+annullate tutto l'inutile lavoro sul quale gli altri hanno lavorato nell'ultimo
+anno.  Improvvisamente la decisione che avevate preso un anno fa non era poi
+così grossa, dato che può essere facilmente annullata.
+
+È emerso che alcune persone hanno dei problemi con questo tipo di approccio,
+questo per due ragioni:
+
+ - ammettere di essere degli idioti è più difficile di quanto sembri.  A tutti
+   noi piace mantenere le apparenze, ed uscire allo scoperto in pubblico per
+   ammettere che ci si è sbagliati è qualcosa di davvero impegnativo.
+ - avere qualcuno che ti dice che ciò su cui hai lavorato nell'ultimo anno
+   non era del tutto valido, può rivelarsi difficile anche per un povero ed
+   umile ingegnere, e mentre il **lavoro** vero era abbastanza facile da
+   cancellare, dall'altro canto potreste aver irrimediabilmente perso la
+   fiducia di quell'ingegnere.  E ricordate che l'"irrevocabile" era quello
+   che avevamo cercato di evitare fin dall'inizio, e la vostra decisione
+   ha finito per esserlo.
+
+Fortunatamente, entrambe queste ragioni posso essere mitigate semplicemente
+ammettendo fin dal principio che non avete una cavolo di idea, dicendo
+agli altri in anticipo che la vostra decisione è puramente ipotetica, e che
+potrebbe essere sbagliata.  Dovreste sempre riservarvi il diritto di cambiare
+la vostra opinione, e rendere gli altri ben **consapevoli** di ciò.
+Ed è molto più facile ammettere di essere stupidi quando non avete **ancora**
+fatto quella cosa stupida.
+
+Poi, quando è realmente emersa la vostra stupidità, le persone semplicemente
+roteeranno gli occhi e diranno "Uffa, no, ancora".
+
+Questa ammissione preventiva di incompetenza potrebbe anche portare le persone
+che stanno facendo il vero lavoro, a pensarci due volte.  Dopo tutto, se
+**loro** non sono certi se sia una buona idea, voi, sicuro come la morte,
+non dovreste incoraggiarli promettendogli che ciò su cui stanno lavorando
+verrà incluso.  Fate si che ci pensino due volte prima che si imbarchino in un
+grosso lavoro.
+
+Ricordate: loro devono sapere più cose sui dettagli rispetto a voi, e
+solitamente pensano di avere già la risposta a tutto. La miglior cosa che
+potete fare in qualità di dirigente è di non instillare troppa fiducia, ma
+invece fornire una salutare dose di pensiero critico su quanto stanno facendo.
+
+Comunque, un altro modo di evitare una decisione è quello di lamentarsi
+malinconicamente dicendo : "non possiamo farli entrambi e basta?" e con uno
+sguardo pietoso.  Fidatevi, funziona.  Se non è chiaro quale sia il miglior
+approccio, lo scopriranno.  La risposta potrebbe essere data dal fatto che
+entrambe i gruppi di lavoro diventano frustati al punto di rinunciarvi.
+
+Questo può suonare come un fallimento, ma di solito questo è un segno che
+c'era qualcosa che non andava in entrambe i progetti, e il motivo per
+il quale le persone coinvolte non abbiano potuto decidere era che entrambe
+sbagliavano.  Voi ne uscirete freschi come una rosa, e avrete evitato un'altra
+decisione con la quale avreste potuto fregarvi.
+
+
+2) Le persone
+-------------
+
+Ci sono molte persone stupide, ed essere un dirigente significa che dovrete
+scendere a patti con questo, e molto più importate, che **loro** devono avere
+a che fare con **voi**.
+
+Ne emerge che mentre è facile annullare degli errori tecnici, non è invece
+così facile rimuovere i disordini della personalità.  Dovrete semplicemente
+convivere con i loro, ed i vostri, problemi.
+
+Comunque, al fine di preparavi in qualità di dirigenti del kernel, è meglio
+ricordare di non abbattere alcun ponte, bombardare alcun paesano innocente,
+o escludere troppi sviluppatori kernel. Ne emerge che escludere le persone
+è piuttosto facile, mentre includerle nuovamente è difficile. Così
+"l'esclusione" immediatamente cade sotto il titolo di "non reversibile", e
+diviene un no-no secondo la sezione :ref:`it_decisions`.
+
+Esistono alcune semplici regole qui:
+
+ (1) non chiamate le persone teste di c*** (al meno, non in pubblico)
+ (2) imparate a scusarvi quando dimenticate la regola (1)
+
+Il problema del punto numero 1 è che è molto facile da rispettare, dato che
+è possibile dire "sei una testa di c***" in milioni di modi differenti [#f2]_,
+a volte senza nemmeno pensarci, e praticamente sempre con la calda convinzione
+di essere nel giusto.
+
+E più convinti sarete che avete ragione (e diciamolo, potete chiamare
+praticamente **tutti** testa di c**, e spesso **sarete** nel giusto), più
+difficile sarà scusarvi successivamente.
+
+Per risolvere questo problema, avete due possibilità:
+
+ - diventare davvero bravi nello scusarsi
+ - essere amabili così che nessuno finirà col sentirsi preso di mira.  Siate
+   creativi abbastanza, e potrebbero esserne divertiti.
+
+L'opzione dell'essere immancabilmente educati non esiste proprio. Nessuno
+si fiderà di qualcuno che chiaramente sta nascondendo il suo vero carattere.
+
+.. [#f2] Paul Simon cantava: "50 modi per lasciare il vostro amante", perché,
+	 molto francamente, "Un milione di modi per dire ad uno sviluppatore
+	 Testa di c***" non avrebbe funzionato. Ma sono sicuro che ci abbia
+	 pensato.
+
+
+3) Le persone II - quelle buone
+-------------------------------
+
+Mentre emerge che la maggior parte delle persone sono stupide, il corollario
+a questo è il triste fatto che anche voi siete fra queste, e che mentre
+possiamo tutti crogiolarci nella sicurezza di essere migliori della media
+delle persone (diciamocelo, nessuno crede di essere nelle media o sotto di
+essa), dovremmo anche ammettere che non siamo il "coltello più affilato" del
+circondario, e che ci saranno altre persone che sono meno stupide di quanto
+lo siete voi.
+
+Molti reagiscono male davanti alle persone intelligenti. Altri le usano a
+proprio vantaggio.
+
+Assicuratevi che voi, in qualità di manutentori del kernel, siate nel secondo
+gruppo. Inchinatevi dinanzi a loro perché saranno le persone che vi renderanno
+il lavoro più facile.  In particolare, prenderanno le decisioni per voi, che è
+l'oggetto di questo gioco.
+
+Quindi quando trovate qualcuno più sveglio di voi, prendetevela comoda.
+Le vostre responsabilità dirigenziali si ridurranno in gran parte nel dire
+"Sembra una buona idea - Vai", oppure "Sembra buono, ma invece circa questo e
+quello?".  La seconda versione in particolare è una gran modo per imparare
+qualcosa di nuovo circa "questo e quello" o di sembrare **extra** dirigenziali
+sottolineando qualcosa alla quale i più svegli non avevano pensato.  In
+entrambe i casi, vincete.
+
+Una cosa alla quale dovete fare attenzione è che l'essere grandi in qualcosa
+non si traduce automaticamente nell'essere grandi anche in altre cose.  Quindi
+dovreste dare una spintarella alle persone in una specifica direzione, ma
+diciamocelo, potrebbero essere bravi in ciò che fanno e far schifo in tutto
+il resto.  La buona notizia è che le persone tendono a gravitare attorno a ciò
+in cui sono bravi, quindi non state facendo nulla di irreversibile quando li
+spingete verso una certa direzione, solo non spingete troppo.
+
+
+4) Addossare le colpe
+---------------------
+
+Le cose andranno male, e le persone vogliono qualcuno da incolpare. Sarete voi.
+
+Non è poi così difficile accettare la colpa, specialmente se le persone
+riescono a capire che non era **tutta** colpa vostra.  Il che ci porta
+sulla miglior strada per assumersi la colpa: fatelo per qualcun'altro.
+Vi sentirete bene nel assumervi la responsabilità, e loro si sentiranno
+bene nel non essere incolpati, e coloro che hanno perso i loro 36GB di
+pornografia a causa della vostra incompetenza ammetteranno a malincuore che
+almeno non avete cercato di fare il furbetto.
+
+Successivamente fate in modo che gli sviluppatori che in realtà hanno fallito
+(se riuscite a trovarli) sappiano **in privato** che sono "fottuti".
+Questo non per fargli sapere che la prossima volta possono evitarselo ma per
+fargli capire che sono in debito.  E, forse cosa più importante, sono loro che
+devono sistemare la cosa.  Perché, ammettiamolo, è sicuro non sarete voi a
+farlo.
+
+Assumersi la colpa è anche ciò che vi rendere dirigenti in prima battuta.
+È parte di ciò che spinge gli altri a fidarsi di voi, e vi garantisce
+la gloria potenziale, perché siete gli unici a dire "Ho fatto una cavolata".
+E se avete seguito le regole precedenti, sarete decisamente bravi nel dirlo.
+
+
+5) Le cose da evitare
+---------------------
+
+Esiste una cosa che le persone odiano più che essere chiamate "teste di c****",
+ed è essere chiamate "teste di c****" con fare da bigotto.  Se per il primo
+caso potrete comunque scusarvi, per il secondo non ve ne verrà data nemmeno
+l'opportunità.  Probabilmente smetteranno di ascoltarvi anche se tutto sommato
+state svolgendo un buon lavoro.
+
+Tutti crediamo di essere migliori degli altri, il che significa che quando
+qualcuno inizia a darsi delle arie, ci da **davvero** fastidio.  Potreste anche
+essere moralmente ed intellettualmente superiore a tutti quelli attorno a voi,
+ma non cercate di renderlo ovvio per gli altri a meno che non **vogliate**
+veramente far arrabbiare qualcuno [#f3]_.
+
+Allo stesso modo evitate di essere troppo gentili e pacati.  Le buone maniere
+facilmente finiscono per strabordare e nascondere i problemi, e come si usa
+dire, "su internet nessuno può sentire la vostra pacatezza".  Usate argomenti
+diretti per farvi capire, non potete sperare che la gente capisca in altro
+modo.
+
+Un po' di umorismo può aiutare a smorzare sia la franchezza che la moralità.
+Andare oltre i limiti al punto d'essere ridicolo può portare dei punti a casa
+senza renderlo spiacevole per i riceventi, i quali penseranno che stavate
+facendo gli scemi.  Può anche aiutare a lasciare andare quei blocchi mentali
+che abbiamo nei confronti delle critiche.
+
+.. [#f3] Suggerimento: i forum di discussione su internet, che non sono
+  collegati col vostro lavoro, sono ottimi modi per sfogare la frustrazione
+  verso altre persone. Di tanto in tanto scrivete messaggi offensivi col ghigno
+  in faccia per infiammare qualche discussione: vi sentirete purificati. Solo
+  cercate di non cagare troppo vicino a casa.
+
+6) Perché io?
+-------------
+
+Dato che la vostra responsabilità principale è quella di prendervi le colpe
+d'altri, e rendere dolorosamente ovvio a tutti che siete degli incompetenti,
+la domanda naturale che ne segue sarà : perché dovrei fare tutto ciò?
+
+Innanzitutto, potreste diventare o no popolari al punto da avere la fila di
+ragazzine (o ragazzini, evitiamo pregiudizi o sessismo) che gridano e bussano
+alla porta del vostro camerino, ma comunque **proverete** un immenso senso di
+realizzazione personale dall'essere "in carica".  Dimenticate il fatto che voi
+state discutendo con tutti e che cercate di inseguirli il più velocemente che
+potete. Tutti continueranno a pensare che voi siete la persona in carica.
+
+È un bel lavoro se riuscite ad adattarlo a voi.
diff --git a/Documentation/translations/it_IT/process/submit-checklist.rst b/Documentation/translations/it_IT/process/submit-checklist.rst
index 995ee69fab11..3e575502690f 100644
--- a/Documentation/translations/it_IT/process/submit-checklist.rst
+++ b/Documentation/translations/it_IT/process/submit-checklist.rst
@@ -117,7 +117,7 @@ sottomissione delle patch, in particolare
     sorgenti che ne spieghi la logica: cosa fanno e perché.
 
 25) Se la patch aggiunge nuove chiamate ioctl, allora aggiornate
-    ``Documentation/ioctl/ioctl-number.rst``.
+    ``Documentation/userspace-api/ioctl/ioctl-number.rst``.
 
 26) Se il codice che avete modificato dipende o usa una qualsiasi interfaccia o
     funzionalità del kernel che è associata a uno dei seguenti simboli
diff --git a/Documentation/translations/it_IT/riscv/patch-acceptance.rst b/Documentation/translations/it_IT/riscv/patch-acceptance.rst
new file mode 100644
index 000000000000..edf67252b3fb
--- /dev/null
+++ b/Documentation/translations/it_IT/riscv/patch-acceptance.rst
@@ -0,0 +1,40 @@
+.. include:: ../disclaimer-ita.rst
+
+:Original: :doc:`../../../riscv/patch-acceptance`
+:Translator: Federico Vaga <federico.vaga@vaga.pv.it>
+
+arch/riscv linee guida alla manutenzione per gli sviluppatori
+=============================================================
+
+Introduzione
+------------
+
+L'insieme di istruzioni RISC-V sono sviluppate in modo aperto: le
+bozze in fase di sviluppo sono disponibili a tutti per essere
+revisionate e per essere sperimentare nelle implementazioni.  Le bozze
+dei nuovi moduli o estensioni possono cambiare in fase di sviluppo - a
+volte in modo incompatibile rispetto a bozze precedenti.  Questa
+flessibilità può portare a dei problemi di manutenzioni per il
+supporto RISC-V nel kernel Linux. I manutentori Linux non amano
+l'abbandono del codice, e il processo di sviluppo del kernel
+preferisce codice ben revisionato e testato rispetto a quello
+sperimentale.  Desideriamo estendere questi stessi principi al codice
+relativo all'architettura RISC-V che verrà accettato per l'inclusione
+nel kernel.
+
+In aggiunta alla lista delle verifiche da fare prima di inviare una patch
+-------------------------------------------------------------------------
+
+Accetteremo le patch per un nuovo modulo o estensione se la fondazione
+RISC-V li classifica come "Frozen" o "Retified".  (Ovviamente, gli
+sviluppatori sono liberi di mantenere una copia del kernel Linux
+contenente il codice per una bozza di estensione).
+
+In aggiunta, la specifica RISC-V permette agli implementatori di
+creare le proprie estensioni.  Queste estensioni non passano
+attraverso il processo di revisione della fondazione RISC-V.  Per
+questo motivo, al fine di evitare complicazioni o problemi di
+prestazioni, accetteremo patch solo per quelle estensioni che sono
+state ufficialmente accettate dalla fondazione RISC-V.  (Ovviamente,
+gli implementatori sono liberi di mantenere una copia del kernel Linux
+contenente il codice per queste specifiche estensioni).
diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt
index 2e831ece6e26..e50fe6541335 100644
--- a/Documentation/translations/ko_KR/memory-barriers.txt
+++ b/Documentation/translations/ko_KR/memory-barriers.txt
@@ -641,7 +641,7 @@ P 는 짝수 번호 캐시 라인에 저장되어 있고, 변수 B 는 홀수 
 리눅스 커널이 지원하는 CPU 들은 (1) 쓰기가 정말로 일어날지, (2) 쓰기가 어디에
 이루어질지, 그리고 (3) 쓰여질 값을 확실히 알기 전까지는 쓰기를 수행하지 않기
 때문입니다.  하지만 "컨트롤 의존성" 섹션과
-Documentation/RCU/rcu_dereference.txt 파일을 주의 깊게 읽어 주시기 바랍니다:
+Documentation/RCU/rcu_dereference.rst 파일을 주의 깊게 읽어 주시기 바랍니다:
 컴파일러는 매우 창의적인 많은 방법으로 종속성을 깰 수 있습니다.
 
 	CPU 1		      CPU 2
diff --git a/Documentation/translations/zh_CN/filesystems/sysfs.txt b/Documentation/translations/zh_CN/filesystems/sysfs.txt
index ee1f37da5b23..fcf620049d11 100644
--- a/Documentation/translations/zh_CN/filesystems/sysfs.txt
+++ b/Documentation/translations/zh_CN/filesystems/sysfs.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/filesystems/sysfs.txt
+Chinese translated version of Documentation/filesystems/sysfs.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -10,7 +10,7 @@ Maintainer: Patrick Mochel	<mochel@osdl.org>
 		Mike Murphy <mamurph@cs.clemson.edu>
 Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
 ---------------------------------------------------------------------
-Documentation/filesystems/sysfs.txt 的中文翻译
+Documentation/filesystems/sysfs.rst 的中文翻译
 
 如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
@@ -40,7 +40,7 @@ sysfs 是一个最初基于 ramfs 且位于内存的文件系统。它提供导
 数据结构及其属性，以及它们之间的关联到用户空间的方法。
 
 sysfs 始终与 kobject 的底层结构紧密相关。请阅读
-Documentation/kobject.txt 文档以获得更多关于 kobject 接口的
+Documentation/core-api/kobject.rst 文档以获得更多关于 kobject 接口的
 信息。
 
 
@@ -281,7 +281,7 @@ drivers/ 包含了每个已为特定总线上的设备而挂载的驱动程序
 假定驱动没有跨越多个总线类型)。
 
 fs/ 包含了一个为文件系统设立的目录。现在每个想要导出属性的文件系统必须
-在 fs/ 下创建自己的层次结构(参见Documentation/filesystems/fuse.txt)。
+在 fs/ 下创建自己的层次结构(参见Documentation/filesystems/fuse.rst)。
 
 dev/ 包含两个子目录： char/ 和 block/。在这两个子目录中，有以
 <major>:<minor> 格式命名的符号链接。这些符号链接指向 sysfs 目录
diff --git a/Documentation/translations/zh_CN/process/submit-checklist.rst b/Documentation/translations/zh_CN/process/submit-checklist.rst
index 8738c55e42a2..50386e0e42e7 100644
--- a/Documentation/translations/zh_CN/process/submit-checklist.rst
+++ b/Documentation/translations/zh_CN/process/submit-checklist.rst
@@ -97,7 +97,7 @@ Linux内核补丁提交清单
 24) 所有内存屏障例如 ``barrier()``, ``rmb()``, ``wmb()`` 都需要源代码中的注
     释来解释它们正在执行的操作及其原因的逻辑。
 
-25) 如果补丁添加了任何ioctl，那么也要更新 ``Documentation/ioctl/ioctl-number.rst``
+25) 如果补丁添加了任何ioctl，那么也要更新 ``Documentation/userspace-api/ioctl/ioctl-number.rst``
 
 26) 如果修改后的源代码依赖或使用与以下 ``Kconfig`` 符号相关的任何内核API或
     功能，则在禁用相关 ``Kconfig`` 符号和/或 ``=m`` （如果该选项可用）的情况
diff --git a/Documentation/translations/zh_CN/video4linux/omap3isp.txt b/Documentation/translations/zh_CN/video4linux/omap3isp.txt
index e9f29375aa95..75e481985630 100644
--- a/Documentation/translations/zh_CN/video4linux/omap3isp.txt
+++ b/Documentation/translations/zh_CN/video4linux/omap3isp.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/media/v4l-drivers/omap3isp.rst
+Chinese translated version of Documentation/admin-guide/media/omap3isp.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -11,7 +11,7 @@ Maintainer: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 	  David Cohen <dacohen@gmail.com>
 Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
 ---------------------------------------------------------------------
-Documentation/media/v4l-drivers/omap3isp.rst 的中文翻译
+Documentation/admin-guide/media/omap3isp.rst 的中文翻译
 
 如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
diff --git a/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt b/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt
index 9c39ee58ea50..a88fcbc11eca 100644
--- a/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt
+++ b/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/media/media_kapi.rst
+Chinese translated version of Documentation/driver-api/media/index.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -9,7 +9,7 @@ or if there is a problem with the translation.
 Maintainer: Mauro Carvalho Chehab <mchehab@kernel.org>
 Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
 ---------------------------------------------------------------------
-Documentation/media/media_kapi.rst 的中文翻译
+Documentation/driver-api/media/index.rst 的中文翻译
 
 如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
@@ -488,7 +488,7 @@ struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter,
 
 这个函数会加载给定的模块（如果没有模块需要加载，可以为 NULL），
 并用给定的 i2c 适配器结构体指针（i2c_adapter）和 器件地址（chip/address）
-作为参数调用 i2c_new_device()。如果一切顺利，则就在 v4l2_device
+作为参数调用 i2c_new_client_device()。如果一切顺利，则就在 v4l2_device
 中注册了子设备。
 
 你也可以利用 v4l2_i2c_new_subdev()的最后一个参数，传递一个可能的
@@ -777,7 +777,7 @@ v4l2 核心 API 提供了一个处理视频缓冲的标准方法(称为“videob
 线性 DMA(videobuf-dma-contig)以及大多用于 USB 设备的用 vmalloc
 分配的缓冲(videobuf-vmalloc)。
 
-请参阅 Documentation/media/kapi/v4l2-videobuf.rst，以获得更多关于 videobuf
+请参阅 Documentation/driver-api/media/v4l2-videobuf.rst，以获得更多关于 videobuf
 层的使用信息。
 
 v4l2_fh 结构体
diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
index e983488b48b1..69fc5167e648 100644
--- a/Documentation/userspace-api/index.rst
+++ b/Documentation/userspace-api/index.rst
@@ -22,6 +22,7 @@ place where this information is gathered.
    spec_ctrl
    accelerators/ocxl
    ioctl/index
+   media/index
 
 .. only::  subproject and html
 
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index f759edafd938..59472cd6a11d 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -146,6 +146,7 @@ Code  Seq#    Include File                                           Comments
 'H'   40-4F  sound/hdspm.h                                           conflict!
 'H'   40-4F  sound/hdsp.h                                            conflict!
 'H'   90     sound/usb/usx2y/usb_stream.h
+'H'   00-0F  uapi/misc/habanalabs.h                                  conflict!
 'H'   A0     uapi/linux/usb/cdc-wdm.h
 'H'   C0-F0  net/bluetooth/hci.h                                     conflict!
 'H'   C0-DF  net/bluetooth/hidp/hidp.h                               conflict!
@@ -201,6 +202,7 @@ Code  Seq#    Include File                                           Comments
 'W'   00-1F  linux/wanrouter.h                                       conflict! (pre 3.9)
 'W'   00-3F  sound/asound.h                                          conflict!
 'W'   40-5F  drivers/pci/switch/switchtec.c
+'W'   60-61  linux/watch_queue.h
 'X'   all    fs/xfs/xfs_fs.h,                                        conflict!
              fs/xfs/linux-2.6/xfs_ioctl32.h,
              include/linux/falloc.h,
@@ -286,6 +288,7 @@ Code  Seq#    Include File                                           Comments
 'v'   00-1F  linux/fs.h                                              conflict!
 'v'   00-0F  linux/sonypi.h                                          conflict!
 'v'   00-0F  media/v4l2-subdev.h                                     conflict!
+'v'   20-27  arch/powerpc/include/uapi/asm/vas-api.h		     VAS API
 'v'   C0-FF  linux/meye.h                                            conflict!
 'w'   all                                                            CERN SCI driver
 'y'   00-1F                                                          packet based user level communications
diff --git a/Documentation/userspace-api/media/Makefile b/Documentation/userspace-api/media/Makefile
new file mode 100644
index 000000000000..81a4a1a53bce
--- /dev/null
+++ b/Documentation/userspace-api/media/Makefile
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Rules to convert a .h file to inline RST documentation
+
+SRC_DIR=$(srctree)/Documentation/userspace-api/media
+PARSER = $(srctree)/Documentation/sphinx/parse-headers.pl
+UAPI = $(srctree)/include/uapi/linux
+KAPI = $(srctree)/include/linux
+
+FILES = audio.h.rst ca.h.rst dmx.h.rst frontend.h.rst net.h.rst video.h.rst \
+	  videodev2.h.rst media.h.rst cec.h.rst lirc.h.rst
+
+TARGETS := $(addprefix $(BUILDDIR)/, $(FILES))
+
+gen_rst = \
+	echo ${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions; \
+	${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions
+
+quiet_gen_rst = echo '  PARSE   $(patsubst $(srctree)/%,%,$<)'; \
+	${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions
+
+silent_gen_rst = ${gen_rst}
+
+$(BUILDDIR)/audio.h.rst: ${UAPI}/dvb/audio.h ${PARSER} $(SRC_DIR)/audio.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+$(BUILDDIR)/ca.h.rst: ${UAPI}/dvb/ca.h ${PARSER} $(SRC_DIR)/ca.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+$(BUILDDIR)/dmx.h.rst: ${UAPI}/dvb/dmx.h ${PARSER} $(SRC_DIR)/dmx.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+$(BUILDDIR)/frontend.h.rst: ${UAPI}/dvb/frontend.h ${PARSER} $(SRC_DIR)/frontend.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+$(BUILDDIR)/net.h.rst: ${UAPI}/dvb/net.h ${PARSER} $(SRC_DIR)/net.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+$(BUILDDIR)/video.h.rst: ${UAPI}/dvb/video.h ${PARSER} $(SRC_DIR)/video.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+$(BUILDDIR)/videodev2.h.rst: ${UAPI}/videodev2.h ${PARSER} $(SRC_DIR)/videodev2.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+$(BUILDDIR)/media.h.rst: ${UAPI}/media.h ${PARSER} $(SRC_DIR)/media.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+$(BUILDDIR)/cec.h.rst: ${UAPI}/cec.h ${PARSER} $(SRC_DIR)/cec.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+$(BUILDDIR)/lirc.h.rst: ${UAPI}/lirc.h ${PARSER} $(SRC_DIR)/lirc.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+# Media build rules
+
+.PHONY: all html epub xml latex
+
+all: $(IMGDOT) $(BUILDDIR) ${TARGETS}
+html: all
+epub: all
+xml: all
+latex: $(IMGPDF) all
+linkcheck:
+
+clean:
+	-rm -f $(DOTTGT) $(IMGTGT) ${TARGETS} 2>/dev/null
+
+$(BUILDDIR):
+	$(Q)mkdir -p $@
diff --git a/Documentation/userspace-api/media/audio.h.rst.exceptions b/Documentation/userspace-api/media/audio.h.rst.exceptions
new file mode 100644
index 000000000000..cf6620477f73
--- /dev/null
+++ b/Documentation/userspace-api/media/audio.h.rst.exceptions
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define _DVBAUDIO_H_
+
+# Undocumented audio caps, as this is a deprecated API anyway
+ignore define AUDIO_CAP_DTS
+ignore define AUDIO_CAP_LPCM
+ignore define AUDIO_CAP_MP1
+ignore define AUDIO_CAP_MP2
+ignore define AUDIO_CAP_MP3
+ignore define AUDIO_CAP_AAC
+ignore define AUDIO_CAP_OGG
+ignore define AUDIO_CAP_SDDS
+ignore define AUDIO_CAP_AC3
+
+# some typedefs should point to struct/enums
+replace typedef audio_mixer_t :c:type:`audio_mixer`
+replace typedef audio_status_t :c:type:`audio_status`
diff --git a/Documentation/userspace-api/media/ca.h.rst.exceptions b/Documentation/userspace-api/media/ca.h.rst.exceptions
new file mode 100644
index 000000000000..f6828238eb48
--- /dev/null
+++ b/Documentation/userspace-api/media/ca.h.rst.exceptions
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define _DVBCA_H_
+
+# struct ca_slot_info defines
+replace define CA_CI :c:type:`ca_slot_info`
+replace define CA_CI_LINK :c:type:`ca_slot_info`
+replace define CA_CI_PHYS :c:type:`ca_slot_info`
+replace define CA_DESCR :c:type:`ca_slot_info`
+replace define CA_SC :c:type:`ca_slot_info`
+replace define CA_CI_MODULE_PRESENT :c:type:`ca_slot_info`
+replace define CA_CI_MODULE_READY :c:type:`ca_slot_info`
+
+# struct ca_descr_info defines
+replace define CA_ECD :c:type:`ca_descr_info`
+replace define CA_NDS :c:type:`ca_descr_info`
+replace define CA_DSS :c:type:`ca_descr_info`
+
+# some typedefs should point to struct/enums
+replace typedef ca_slot_info_t :c:type:`ca_slot_info`
+replace typedef ca_descr_info_t :c:type:`ca_descr_info`
+replace typedef ca_caps_t :c:type:`ca_caps`
+replace typedef ca_msg_t :c:type:`ca_msg`
+replace typedef ca_descr_t :c:type:`ca_descr`
diff --git a/Documentation/userspace-api/media/cec.h.rst.exceptions b/Documentation/userspace-api/media/cec.h.rst.exceptions
new file mode 100644
index 000000000000..d83790ccac8e
--- /dev/null
+++ b/Documentation/userspace-api/media/cec.h.rst.exceptions
@@ -0,0 +1,575 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define _CEC_UAPI_H
+
+# define macros to ignore
+
+ignore define CEC_MAX_MSG_SIZE
+ignore define CEC_MAX_LOG_ADDRS
+
+ignore define CEC_LOG_ADDR_MASK_TV
+ignore define CEC_LOG_ADDR_MASK_RECORD
+ignore define CEC_LOG_ADDR_MASK_TUNER
+ignore define CEC_LOG_ADDR_MASK_PLAYBACK
+ignore define CEC_LOG_ADDR_MASK_AUDIOSYSTEM
+ignore define CEC_LOG_ADDR_MASK_BACKUP
+ignore define CEC_LOG_ADDR_MASK_SPECIFIC
+ignore define CEC_LOG_ADDR_MASK_UNREGISTERED
+
+# Shouldn't them be documented?
+ignore define CEC_LOG_ADDR_INVALID
+ignore define CEC_PHYS_ADDR_INVALID
+
+ignore define CEC_VENDOR_ID_NONE
+
+ignore define CEC_MODE_INITIATOR_MSK
+ignore define CEC_MODE_FOLLOWER_MSK
+
+# Part of CEC 2.0 spec - shouldn't be documented too?
+ignore define CEC_LOG_ADDR_TV
+ignore define CEC_LOG_ADDR_RECORD_1
+ignore define CEC_LOG_ADDR_RECORD_2
+ignore define CEC_LOG_ADDR_TUNER_1
+ignore define CEC_LOG_ADDR_PLAYBACK_1
+ignore define CEC_LOG_ADDR_AUDIOSYSTEM
+ignore define CEC_LOG_ADDR_TUNER_2
+ignore define CEC_LOG_ADDR_TUNER_3
+ignore define CEC_LOG_ADDR_PLAYBACK_2
+ignore define CEC_LOG_ADDR_RECORD_3
+ignore define CEC_LOG_ADDR_TUNER_4
+ignore define CEC_LOG_ADDR_PLAYBACK_3
+ignore define CEC_LOG_ADDR_BACKUP_1
+ignore define CEC_LOG_ADDR_BACKUP_2
+ignore define CEC_LOG_ADDR_SPECIFIC
+ignore define CEC_LOG_ADDR_UNREGISTERED
+ignore define CEC_LOG_ADDR_BROADCAST
+
+# IMHO, those should also be documented
+
+ignore define CEC_MSG_ACTIVE_SOURCE
+ignore define CEC_MSG_IMAGE_VIEW_ON
+ignore define CEC_MSG_TEXT_VIEW_ON
+
+ignore define CEC_MSG_INACTIVE_SOURCE
+ignore define CEC_MSG_REQUEST_ACTIVE_SOURCE
+ignore define CEC_MSG_ROUTING_CHANGE
+ignore define CEC_MSG_ROUTING_INFORMATION
+ignore define CEC_MSG_SET_STREAM_PATH
+
+ignore define CEC_MSG_STANDBY
+
+ignore define CEC_MSG_RECORD_OFF
+ignore define CEC_MSG_RECORD_ON
+
+ignore define CEC_OP_RECORD_SRC_OWN
+ignore define CEC_OP_RECORD_SRC_DIGITAL
+ignore define CEC_OP_RECORD_SRC_ANALOG
+ignore define CEC_OP_RECORD_SRC_EXT_PLUG
+ignore define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR
+
+ignore define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID
+ignore define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL
+
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2
+ignore define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T
+
+ignore define CEC_OP_ANA_BCAST_TYPE_CABLE
+ignore define CEC_OP_ANA_BCAST_TYPE_SATELLITE
+ignore define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL
+
+ignore define CEC_OP_BCAST_SYSTEM_PAL_BG
+ignore define CEC_OP_BCAST_SYSTEM_SECAM_LQ
+ignore define CEC_OP_BCAST_SYSTEM_PAL_M
+ignore define CEC_OP_BCAST_SYSTEM_NTSC_M
+ignore define CEC_OP_BCAST_SYSTEM_PAL_I
+ignore define CEC_OP_BCAST_SYSTEM_SECAM_DK
+ignore define CEC_OP_BCAST_SYSTEM_SECAM_BG
+ignore define CEC_OP_BCAST_SYSTEM_SECAM_L
+ignore define CEC_OP_BCAST_SYSTEM_PAL_DK
+ignore define CEC_OP_BCAST_SYSTEM_OTHER
+
+ignore define CEC_OP_CHANNEL_NUMBER_FMT_1_PART
+ignore define CEC_OP_CHANNEL_NUMBER_FMT_2_PART
+
+ignore define CEC_MSG_RECORD_STATUS
+
+ignore define CEC_OP_RECORD_STATUS_CUR_SRC
+ignore define CEC_OP_RECORD_STATUS_DIG_SERVICE
+ignore define CEC_OP_RECORD_STATUS_ANA_SERVICE
+ignore define CEC_OP_RECORD_STATUS_EXT_INPUT
+ignore define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE
+ignore define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE
+ignore define CEC_OP_RECORD_STATUS_NO_SERVICE
+ignore define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG
+ignore define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR
+ignore define CEC_OP_RECORD_STATUS_UNSUP_CA
+ignore define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS
+ignore define CEC_OP_RECORD_STATUS_CANT_COPY_SRC
+ignore define CEC_OP_RECORD_STATUS_NO_MORE_COPIES
+ignore define CEC_OP_RECORD_STATUS_NO_MEDIA
+ignore define CEC_OP_RECORD_STATUS_PLAYING
+ignore define CEC_OP_RECORD_STATUS_ALREADY_RECORDING
+ignore define CEC_OP_RECORD_STATUS_MEDIA_PROT
+ignore define CEC_OP_RECORD_STATUS_NO_SIGNAL
+ignore define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM
+ignore define CEC_OP_RECORD_STATUS_NO_SPACE
+ignore define CEC_OP_RECORD_STATUS_PARENTAL_LOCK
+ignore define CEC_OP_RECORD_STATUS_TERMINATED_OK
+ignore define CEC_OP_RECORD_STATUS_ALREADY_TERM
+ignore define CEC_OP_RECORD_STATUS_OTHER
+
+ignore define CEC_MSG_RECORD_TV_SCREEN
+
+ignore define CEC_MSG_CLEAR_ANALOGUE_TIMER
+
+ignore define CEC_OP_REC_SEQ_SUNDAY
+ignore define CEC_OP_REC_SEQ_MONDAY
+ignore define CEC_OP_REC_SEQ_TUESDAY
+ignore define CEC_OP_REC_SEQ_WEDNESDAY
+ignore define CEC_OP_REC_SEQ_THURSDAY
+ignore define CEC_OP_REC_SEQ_FRIDAY
+ignore define CEC_OP_REC_SEQ_SATERDAY
+ignore define CEC_OP_REC_SEQ_ONCE_ONLY
+
+ignore define CEC_MSG_CLEAR_DIGITAL_TIMER
+
+ignore define CEC_MSG_CLEAR_EXT_TIMER
+
+ignore define CEC_OP_EXT_SRC_PLUG
+ignore define CEC_OP_EXT_SRC_PHYS_ADDR
+
+ignore define CEC_MSG_SET_ANALOGUE_TIMER
+ignore define CEC_MSG_SET_DIGITAL_TIMER
+ignore define CEC_MSG_SET_EXT_TIMER
+
+ignore define CEC_MSG_SET_TIMER_PROGRAM_TITLE
+ignore define CEC_MSG_TIMER_CLEARED_STATUS
+
+ignore define CEC_OP_TIMER_CLR_STAT_RECORDING
+ignore define CEC_OP_TIMER_CLR_STAT_NO_MATCHING
+ignore define CEC_OP_TIMER_CLR_STAT_NO_INFO
+ignore define CEC_OP_TIMER_CLR_STAT_CLEARED
+
+ignore define CEC_MSG_TIMER_STATUS
+
+ignore define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP
+ignore define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP
+
+ignore define CEC_OP_MEDIA_INFO_UNPROT_MEDIA
+ignore define CEC_OP_MEDIA_INFO_PROT_MEDIA
+ignore define CEC_OP_MEDIA_INFO_NO_MEDIA
+
+ignore define CEC_OP_PROG_IND_NOT_PROGRAMMED
+ignore define CEC_OP_PROG_IND_PROGRAMMED
+
+ignore define CEC_OP_PROG_INFO_ENOUGH_SPACE
+ignore define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE
+ignore define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE
+ignore define CEC_OP_PROG_INFO_NONE_AVAILABLE
+
+ignore define CEC_OP_PROG_ERROR_NO_FREE_TIMER
+ignore define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE
+ignore define CEC_OP_PROG_ERROR_REC_SEQ_ERROR
+ignore define CEC_OP_PROG_ERROR_INV_EXT_PLUG
+ignore define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR
+ignore define CEC_OP_PROG_ERROR_CA_UNSUPP
+ignore define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS
+ignore define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP
+ignore define CEC_OP_PROG_ERROR_PARENTAL_LOCK
+ignore define CEC_OP_PROG_ERROR_CLOCK_FAILURE
+ignore define CEC_OP_PROG_ERROR_DUPLICATE
+
+ignore define CEC_MSG_CEC_VERSION
+
+ignore define CEC_OP_CEC_VERSION_1_3A
+ignore define CEC_OP_CEC_VERSION_1_4
+ignore define CEC_OP_CEC_VERSION_2_0
+
+ignore define CEC_MSG_GET_CEC_VERSION
+ignore define CEC_MSG_GIVE_PHYSICAL_ADDR
+ignore define CEC_MSG_GET_MENU_LANGUAGE
+ignore define CEC_MSG_REPORT_PHYSICAL_ADDR
+
+ignore define CEC_OP_PRIM_DEVTYPE_TV
+ignore define CEC_OP_PRIM_DEVTYPE_RECORD
+ignore define CEC_OP_PRIM_DEVTYPE_TUNER
+ignore define CEC_OP_PRIM_DEVTYPE_PLAYBACK
+ignore define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM
+ignore define CEC_OP_PRIM_DEVTYPE_SWITCH
+ignore define CEC_OP_PRIM_DEVTYPE_PROCESSOR
+
+ignore define CEC_MSG_SET_MENU_LANGUAGE
+ignore define CEC_MSG_REPORT_FEATURES
+
+ignore define CEC_OP_ALL_DEVTYPE_TV
+ignore define CEC_OP_ALL_DEVTYPE_RECORD
+ignore define CEC_OP_ALL_DEVTYPE_TUNER
+ignore define CEC_OP_ALL_DEVTYPE_PLAYBACK
+ignore define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM
+ignore define CEC_OP_ALL_DEVTYPE_SWITCH
+
+ignore define CEC_OP_FEAT_EXT
+
+ignore define CEC_OP_FEAT_RC_TV_PROFILE_NONE
+ignore define CEC_OP_FEAT_RC_TV_PROFILE_1
+ignore define CEC_OP_FEAT_RC_TV_PROFILE_2
+ignore define CEC_OP_FEAT_RC_TV_PROFILE_3
+ignore define CEC_OP_FEAT_RC_TV_PROFILE_4
+ignore define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU
+ignore define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU
+ignore define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU
+ignore define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU
+ignore define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU
+
+ignore define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN
+ignore define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING
+ignore define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL
+ignore define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE
+ignore define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX
+ignore define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX
+
+ignore define CEC_MSG_GIVE_FEATURES
+
+ignore define CEC_MSG_DECK_CONTROL
+
+ignore define CEC_OP_DECK_CTL_MODE_SKIP_FWD
+ignore define CEC_OP_DECK_CTL_MODE_SKIP_REV
+ignore define CEC_OP_DECK_CTL_MODE_STOP
+ignore define CEC_OP_DECK_CTL_MODE_EJECT
+
+ignore define CEC_MSG_DECK_STATUS
+
+ignore define CEC_OP_DECK_INFO_PLAY
+ignore define CEC_OP_DECK_INFO_RECORD
+ignore define CEC_OP_DECK_INFO_PLAY_REV
+ignore define CEC_OP_DECK_INFO_STILL
+ignore define CEC_OP_DECK_INFO_SLOW
+ignore define CEC_OP_DECK_INFO_SLOW_REV
+ignore define CEC_OP_DECK_INFO_FAST_FWD
+ignore define CEC_OP_DECK_INFO_FAST_REV
+ignore define CEC_OP_DECK_INFO_NO_MEDIA
+ignore define CEC_OP_DECK_INFO_STOP
+ignore define CEC_OP_DECK_INFO_SKIP_FWD
+ignore define CEC_OP_DECK_INFO_SKIP_REV
+ignore define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD
+ignore define CEC_OP_DECK_INFO_INDEX_SEARCH_REV
+ignore define CEC_OP_DECK_INFO_OTHER
+
+ignore define CEC_MSG_GIVE_DECK_STATUS
+
+ignore define CEC_OP_STATUS_REQ_ON
+ignore define CEC_OP_STATUS_REQ_OFF
+ignore define CEC_OP_STATUS_REQ_ONCE
+
+ignore define CEC_MSG_PLAY
+
+ignore define CEC_OP_PLAY_MODE_PLAY_FWD
+ignore define CEC_OP_PLAY_MODE_PLAY_REV
+ignore define CEC_OP_PLAY_MODE_PLAY_STILL
+ignore define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN
+ignore define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED
+ignore define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX
+ignore define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN
+ignore define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED
+ignore define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX
+ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN
+ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED
+ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX
+ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN
+ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED
+ignore define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX
+
+ignore define CEC_MSG_GIVE_TUNER_DEVICE_STATUS
+ignore define CEC_MSG_SELECT_ANALOGUE_SERVICE
+ignore define CEC_MSG_SELECT_DIGITAL_SERVICE
+ignore define CEC_MSG_TUNER_DEVICE_STATUS
+
+ignore define CEC_OP_REC_FLAG_USED
+ignore define CEC_OP_REC_FLAG_NOT_USED
+
+ignore define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL
+ignore define CEC_OP_TUNER_DISPLAY_INFO_NONE
+ignore define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE
+
+ignore define CEC_MSG_TUNER_STEP_DECREMENT
+ignore define CEC_MSG_TUNER_STEP_INCREMENT
+
+ignore define CEC_MSG_DEVICE_VENDOR_ID
+ignore define CEC_MSG_GIVE_DEVICE_VENDOR_ID
+ignore define CEC_MSG_VENDOR_COMMAND
+ignore define CEC_MSG_VENDOR_COMMAND_WITH_ID
+ignore define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN
+ignore define CEC_MSG_VENDOR_REMOTE_BUTTON_UP
+
+ignore define CEC_MSG_SET_OSD_STRING
+
+ignore define CEC_OP_DISP_CTL_DEFAULT
+ignore define CEC_OP_DISP_CTL_UNTIL_CLEARED
+ignore define CEC_OP_DISP_CTL_CLEAR
+
+ignore define CEC_MSG_GIVE_OSD_NAME
+ignore define CEC_MSG_SET_OSD_NAME
+
+ignore define CEC_MSG_MENU_REQUEST
+
+ignore define CEC_OP_MENU_REQUEST_ACTIVATE
+ignore define CEC_OP_MENU_REQUEST_DEACTIVATE
+ignore define CEC_OP_MENU_REQUEST_QUERY
+
+ignore define CEC_MSG_MENU_STATUS
+
+ignore define CEC_OP_MENU_STATE_ACTIVATED
+ignore define CEC_OP_MENU_STATE_DEACTIVATED
+
+ignore define CEC_MSG_USER_CONTROL_PRESSED
+
+ignore define CEC_OP_UI_CMD_SELECT
+ignore define CEC_OP_UI_CMD_UP
+ignore define CEC_OP_UI_CMD_DOWN
+ignore define CEC_OP_UI_CMD_LEFT
+ignore define CEC_OP_UI_CMD_RIGHT
+ignore define CEC_OP_UI_CMD_RIGHT_UP
+ignore define CEC_OP_UI_CMD_RIGHT_DOWN
+ignore define CEC_OP_UI_CMD_LEFT_UP
+ignore define CEC_OP_UI_CMD_LEFT_DOWN
+ignore define CEC_OP_UI_CMD_DEVICE_ROOT_MENU
+ignore define CEC_OP_UI_CMD_DEVICE_SETUP_MENU
+ignore define CEC_OP_UI_CMD_CONTENTS_MENU
+ignore define CEC_OP_UI_CMD_FAVORITE_MENU
+ignore define CEC_OP_UI_CMD_BACK
+ignore define CEC_OP_UI_CMD_MEDIA_TOP_MENU
+ignore define CEC_OP_UI_CMD_MEDIA_CONTEXT_SENSITIVE_MENU
+ignore define CEC_OP_UI_CMD_NUMBER_ENTRY_MODE
+ignore define CEC_OP_UI_CMD_NUMBER_11
+ignore define CEC_OP_UI_CMD_NUMBER_12
+ignore define CEC_OP_UI_CMD_NUMBER_0_OR_NUMBER_10
+ignore define CEC_OP_UI_CMD_NUMBER_1
+ignore define CEC_OP_UI_CMD_NUMBER_2
+ignore define CEC_OP_UI_CMD_NUMBER_3
+ignore define CEC_OP_UI_CMD_NUMBER_4
+ignore define CEC_OP_UI_CMD_NUMBER_5
+ignore define CEC_OP_UI_CMD_NUMBER_6
+ignore define CEC_OP_UI_CMD_NUMBER_7
+ignore define CEC_OP_UI_CMD_NUMBER_8
+ignore define CEC_OP_UI_CMD_NUMBER_9
+ignore define CEC_OP_UI_CMD_DOT
+ignore define CEC_OP_UI_CMD_ENTER
+ignore define CEC_OP_UI_CMD_CLEAR
+ignore define CEC_OP_UI_CMD_NEXT_FAVORITE
+ignore define CEC_OP_UI_CMD_CHANNEL_UP
+ignore define CEC_OP_UI_CMD_CHANNEL_DOWN
+ignore define CEC_OP_UI_CMD_PREVIOUS_CHANNEL
+ignore define CEC_OP_UI_CMD_SOUND_SELECT
+ignore define CEC_OP_UI_CMD_INPUT_SELECT
+ignore define CEC_OP_UI_CMD_DISPLAY_INFORMATION
+ignore define CEC_OP_UI_CMD_HELP
+ignore define CEC_OP_UI_CMD_PAGE_UP
+ignore define CEC_OP_UI_CMD_PAGE_DOWN
+ignore define CEC_OP_UI_CMD_POWER
+ignore define CEC_OP_UI_CMD_VOLUME_UP
+ignore define CEC_OP_UI_CMD_VOLUME_DOWN
+ignore define CEC_OP_UI_CMD_MUTE
+ignore define CEC_OP_UI_CMD_PLAY
+ignore define CEC_OP_UI_CMD_STOP
+ignore define CEC_OP_UI_CMD_PAUSE
+ignore define CEC_OP_UI_CMD_RECORD
+ignore define CEC_OP_UI_CMD_REWIND
+ignore define CEC_OP_UI_CMD_FAST_FORWARD
+ignore define CEC_OP_UI_CMD_EJECT
+ignore define CEC_OP_UI_CMD_SKIP_FORWARD
+ignore define CEC_OP_UI_CMD_SKIP_BACKWARD
+ignore define CEC_OP_UI_CMD_STOP_RECORD
+ignore define CEC_OP_UI_CMD_PAUSE_RECORD
+ignore define CEC_OP_UI_CMD_ANGLE
+ignore define CEC_OP_UI_CMD_SUB_PICTURE
+ignore define CEC_OP_UI_CMD_VIDEO_ON_DEMAND
+ignore define CEC_OP_UI_CMD_ELECTRONIC_PROGRAM_GUIDE
+ignore define CEC_OP_UI_CMD_TIMER_PROGRAMMING
+ignore define CEC_OP_UI_CMD_INITIAL_CONFIGURATION
+ignore define CEC_OP_UI_CMD_SELECT_BROADCAST_TYPE
+ignore define CEC_OP_UI_CMD_SELECT_SOUND_PRESENTATION
+ignore define CEC_OP_UI_CMD_AUDIO_DESCRIPTION
+ignore define CEC_OP_UI_CMD_INTERNET
+ignore define CEC_OP_UI_CMD_3D_MODE
+ignore define CEC_OP_UI_CMD_PLAY_FUNCTION
+ignore define CEC_OP_UI_CMD_PAUSE_PLAY_FUNCTION
+ignore define CEC_OP_UI_CMD_RECORD_FUNCTION
+ignore define CEC_OP_UI_CMD_PAUSE_RECORD_FUNCTION
+ignore define CEC_OP_UI_CMD_STOP_FUNCTION
+ignore define CEC_OP_UI_CMD_MUTE_FUNCTION
+ignore define CEC_OP_UI_CMD_RESTORE_VOLUME_FUNCTION
+ignore define CEC_OP_UI_CMD_TUNE_FUNCTION
+ignore define CEC_OP_UI_CMD_SELECT_MEDIA_FUNCTION
+ignore define CEC_OP_UI_CMD_SELECT_AV_INPUT_FUNCTION
+ignore define CEC_OP_UI_CMD_SELECT_AUDIO_INPUT_FUNCTION
+ignore define CEC_OP_UI_CMD_POWER_TOGGLE_FUNCTION
+ignore define CEC_OP_UI_CMD_POWER_OFF_FUNCTION
+ignore define CEC_OP_UI_CMD_POWER_ON_FUNCTION
+ignore define CEC_OP_UI_CMD_F1_BLUE
+ignore define CEC_OP_UI_CMD_F2_RED
+ignore define CEC_OP_UI_CMD_F3_GREEN
+ignore define CEC_OP_UI_CMD_F4_YELLOW
+ignore define CEC_OP_UI_CMD_F5
+ignore define CEC_OP_UI_CMD_DATA
+
+ignore define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL
+ignore define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA
+ignore define CEC_OP_UI_BCAST_TYPE_ANALOGUE
+ignore define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T
+ignore define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE
+ignore define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT
+ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL
+ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_T
+ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE
+ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT
+ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT
+ignore define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2
+ignore define CEC_OP_UI_BCAST_TYPE_IP
+
+ignore define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO
+ignore define CEC_OP_UI_SND_PRES_CTL_KARAOKE
+ignore define CEC_OP_UI_SND_PRES_CTL_DOWNMIX
+ignore define CEC_OP_UI_SND_PRES_CTL_REVERB
+ignore define CEC_OP_UI_SND_PRES_CTL_EQUALIZER
+ignore define CEC_OP_UI_SND_PRES_CTL_BASS_UP
+ignore define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL
+ignore define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN
+ignore define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP
+ignore define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL
+ignore define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN
+
+ignore define CEC_MSG_USER_CONTROL_RELEASED
+
+ignore define CEC_MSG_GIVE_DEVICE_POWER_STATUS
+ignore define CEC_MSG_REPORT_POWER_STATUS
+
+ignore define CEC_OP_POWER_STATUS_ON
+ignore define CEC_OP_POWER_STATUS_STANDBY
+ignore define CEC_OP_POWER_STATUS_TO_ON
+ignore define CEC_OP_POWER_STATUS_TO_STANDBY
+
+ignore define CEC_MSG_FEATURE_ABORT
+
+ignore define CEC_OP_ABORT_UNRECOGNIZED_OP
+ignore define CEC_OP_ABORT_INCORRECT_MODE
+ignore define CEC_OP_ABORT_NO_SOURCE
+ignore define CEC_OP_ABORT_INVALID_OP
+ignore define CEC_OP_ABORT_REFUSED
+ignore define CEC_OP_ABORT_UNDETERMINED
+
+ignore define CEC_MSG_ABORT
+
+ignore define CEC_MSG_GIVE_AUDIO_STATUS
+ignore define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS
+ignore define CEC_MSG_REPORT_AUDIO_STATUS
+
+ignore define CEC_OP_AUD_MUTE_STATUS_OFF
+ignore define CEC_OP_AUD_MUTE_STATUS_ON
+
+ignore define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR
+ignore define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR
+ignore define CEC_MSG_SET_SYSTEM_AUDIO_MODE
+
+ignore define CEC_OP_SYS_AUD_STATUS_OFF
+ignore define CEC_OP_SYS_AUD_STATUS_ON
+
+ignore define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST
+ignore define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS
+
+ignore define CEC_OP_AUD_FMT_ID_CEA861
+ignore define CEC_OP_AUD_FMT_ID_CEA861_CXT
+
+ignore define CEC_MSG_SET_AUDIO_RATE
+
+ignore define CEC_OP_AUD_RATE_OFF
+ignore define CEC_OP_AUD_RATE_WIDE_STD
+ignore define CEC_OP_AUD_RATE_WIDE_FAST
+ignore define CEC_OP_AUD_RATE_WIDE_SLOW
+ignore define CEC_OP_AUD_RATE_NARROW_STD
+ignore define CEC_OP_AUD_RATE_NARROW_FAST
+ignore define CEC_OP_AUD_RATE_NARROW_SLOW
+
+ignore define CEC_MSG_INITIATE_ARC
+ignore define CEC_MSG_REPORT_ARC_INITIATED
+ignore define CEC_MSG_REPORT_ARC_TERMINATED
+ignore define CEC_MSG_REQUEST_ARC_INITIATION
+ignore define CEC_MSG_REQUEST_ARC_TERMINATION
+ignore define CEC_MSG_TERMINATE_ARC
+
+ignore define CEC_MSG_REQUEST_CURRENT_LATENCY
+ignore define CEC_MSG_REPORT_CURRENT_LATENCY
+
+ignore define CEC_OP_LOW_LATENCY_MODE_OFF
+ignore define CEC_OP_LOW_LATENCY_MODE_ON
+
+ignore define CEC_OP_AUD_OUT_COMPENSATED_NA
+ignore define CEC_OP_AUD_OUT_COMPENSATED_DELAY
+ignore define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY
+ignore define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY
+
+ignore define CEC_MSG_CDC_MESSAGE
+
+ignore define CEC_MSG_CDC_HEC_INQUIRE_STATE
+ignore define CEC_MSG_CDC_HEC_REPORT_STATE
+
+ignore define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED
+ignore define CEC_OP_HEC_FUNC_STATE_INACTIVE
+ignore define CEC_OP_HEC_FUNC_STATE_ACTIVE
+ignore define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD
+
+ignore define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED
+ignore define CEC_OP_HOST_FUNC_STATE_INACTIVE
+ignore define CEC_OP_HOST_FUNC_STATE_ACTIVE
+
+ignore define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED
+ignore define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE
+ignore define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE
+
+ignore define CEC_OP_CDC_ERROR_CODE_NONE
+ignore define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED
+ignore define CEC_OP_CDC_ERROR_CODE_WRONG_STATE
+ignore define CEC_OP_CDC_ERROR_CODE_OTHER
+
+ignore define CEC_OP_HEC_SUPPORT_NO
+ignore define CEC_OP_HEC_SUPPORT_YES
+
+ignore define CEC_OP_HEC_ACTIVATION_ON
+ignore define CEC_OP_HEC_ACTIVATION_OFF
+
+ignore define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT
+ignore define CEC_MSG_CDC_HEC_SET_STATE
+
+ignore define CEC_OP_HEC_SET_STATE_DEACTIVATE
+ignore define CEC_OP_HEC_SET_STATE_ACTIVATE
+
+ignore define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION
+ignore define CEC_MSG_CDC_HEC_NOTIFY_ALIVE
+ignore define CEC_MSG_CDC_HEC_DISCOVER
+
+ignore define CEC_MSG_CDC_HPD_SET_STATE
+
+ignore define CEC_OP_HPD_STATE_CP_EDID_DISABLE
+ignore define CEC_OP_HPD_STATE_CP_EDID_ENABLE
+ignore define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE
+ignore define CEC_OP_HPD_STATE_EDID_DISABLE
+ignore define CEC_OP_HPD_STATE_EDID_ENABLE
+ignore define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE
+ignore define CEC_MSG_CDC_HPD_REPORT_STATE
+
+ignore define CEC_OP_HPD_ERROR_NONE
+ignore define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE
+ignore define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE
+ignore define CEC_OP_HPD_ERROR_OTHER
+ignore define CEC_OP_HPD_ERROR_NONE_NO_VIDEO
diff --git a/Documentation/userspace-api/media/cec/cec-api.rst b/Documentation/userspace-api/media/cec/cec-api.rst
new file mode 100644
index 000000000000..871db54dfd24
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-api.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. include:: <isonum.txt>
+
+.. _cec:
+
+#########################################
+Part V - Consumer Electronics Control API
+#########################################
+
+This part describes the CEC: Consumer Electronics Control
+
+
+.. only:: html
+
+   .. class:: toc-title
+
+        Table of Contents
+
+.. toctree::
+    :maxdepth: 5
+    :numbered:
+
+    cec-intro
+    cec-funcs
+    cec-pin-error-inj
+    cec-header
+
+
+**********************
+Revision and Copyright
+**********************
+Authors:
+
+- Verkuil, Hans <hverkuil-cisco@xs4all.nl>
+
+ - Initial version.
+
+**Copyright** |copy| 2016 : Hans Verkuil
+
+****************
+Revision History
+****************
+
+:revision: 1.0.0 / 2016-03-17 (*hv*)
+
+Initial revision
diff --git a/Documentation/userspace-api/media/cec/cec-func-close.rst b/Documentation/userspace-api/media/cec/cec-func-close.rst
new file mode 100644
index 000000000000..b89e06a43dad
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-func-close.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _cec-func-close:
+
+***********
+cec close()
+***********
+
+Name
+====
+
+cec-close - Close a cec device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: int close( int fd )
+    :name: cec-close
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <cec-open>`.
+
+
+Description
+===========
+
+Closes the cec device. Resources associated with the file descriptor are
+freed. The device configuration remain unchanged.
+
+
+Return Value
+============
+
+:c:func:`close() <cec-close>` returns 0 on success. On error, -1 is returned, and
+``errno`` is set appropriately. Possible error codes are:
+
+``EBADF``
+    ``fd`` is not a valid open file descriptor.
diff --git a/Documentation/userspace-api/media/cec/cec-func-ioctl.rst b/Documentation/userspace-api/media/cec/cec-func-ioctl.rst
new file mode 100644
index 000000000000..d16a479aacb1
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-func-ioctl.rst
@@ -0,0 +1,73 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _cec-func-ioctl:
+
+***********
+cec ioctl()
+***********
+
+Name
+====
+
+cec-ioctl - Control a cec device
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <sys/ioctl.h>
+
+
+.. c:function:: int ioctl( int fd, int request, void *argp )
+   :name: cec-ioctl
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <cec-open>`.
+
+``request``
+    CEC ioctl request code as defined in the cec.h header file, for
+    example :ref:`CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`.
+
+``argp``
+    Pointer to a request-specific structure.
+
+
+Description
+===========
+
+The :c:func:`ioctl() <cec-ioctl>` function manipulates cec device parameters. The
+argument ``fd`` must be an open file descriptor.
+
+The ioctl ``request`` code specifies the cec function to be called. It
+has encoded in it whether the argument is an input, output or read/write
+parameter, and the size of the argument ``argp`` in bytes.
+
+Macros and structures definitions specifying cec ioctl requests and
+their parameters are located in the cec.h header file. All cec ioctl
+requests, their respective function and parameters are specified in
+:ref:`cec-user-func`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+Request-specific error codes are listed in the individual requests
+descriptions.
+
+When an ioctl that takes an output or read/write parameter fails, the
+parameter remains unmodified.
diff --git a/Documentation/userspace-api/media/cec/cec-func-open.rst b/Documentation/userspace-api/media/cec/cec-func-open.rst
new file mode 100644
index 000000000000..67fd021556b2
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-func-open.rst
@@ -0,0 +1,85 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _cec-func-open:
+
+**********
+cec open()
+**********
+
+Name
+====
+
+cec-open - Open a cec device
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <fcntl.h>
+
+
+.. c:function:: int open( const char *device_name, int flags )
+   :name: cec-open
+
+
+Arguments
+=========
+
+``device_name``
+    Device to be opened.
+
+``flags``
+    Open flags. Access mode must be ``O_RDWR``.
+
+    When the ``O_NONBLOCK`` flag is given, the
+    :ref:`CEC_RECEIVE <CEC_RECEIVE>` and :ref:`CEC_DQEVENT <CEC_DQEVENT>` ioctls
+    will return the ``EAGAIN`` error code when no message or event is available, and
+    ioctls :ref:`CEC_TRANSMIT <CEC_TRANSMIT>`,
+    :ref:`CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` and
+    :ref:`CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
+    all return 0.
+
+    Other flags have no effect.
+
+
+Description
+===========
+
+To open a cec device applications call :c:func:`open() <cec-open>` with the
+desired device name. The function has no side effects; the device
+configuration remain unchanged.
+
+When the device is opened in read-only mode, attempts to modify its
+configuration will result in an error, and ``errno`` will be set to
+EBADF.
+
+
+Return Value
+============
+
+:c:func:`open() <cec-open>` returns the new file descriptor on success. On error,
+-1 is returned, and ``errno`` is set appropriately. Possible error codes
+include:
+
+``EACCES``
+    The requested access to the file is not allowed.
+
+``EMFILE``
+    The process already has the maximum number of files open.
+
+``ENFILE``
+    The system limit on the total number of open files has been reached.
+
+``ENOMEM``
+    Insufficient kernel memory was available.
+
+``ENXIO``
+    No device corresponding to this device special file exists.
diff --git a/Documentation/userspace-api/media/cec/cec-func-poll.rst b/Documentation/userspace-api/media/cec/cec-func-poll.rst
new file mode 100644
index 000000000000..ed3652d9bf17
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-func-poll.rst
@@ -0,0 +1,85 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _cec-func-poll:
+
+**********
+cec poll()
+**********
+
+Name
+====
+
+cec-poll - Wait for some event on a file descriptor
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <sys/poll.h>
+
+
+.. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout )
+   :name: cec-poll
+
+Arguments
+=========
+
+``ufds``
+   List of FD events to be watched
+
+``nfds``
+   Number of FD events at the \*ufds array
+
+``timeout``
+   Timeout to wait for events
+
+
+Description
+===========
+
+With the :c:func:`poll() <cec-poll>` function applications can wait for CEC
+events.
+
+On success :c:func:`poll() <cec-poll>` returns the number of file descriptors
+that have been selected (that is, file descriptors for which the
+``revents`` field of the respective struct :c:type:`pollfd`
+is non-zero). CEC devices set the ``POLLIN`` and ``POLLRDNORM`` flags in
+the ``revents`` field if there are messages in the receive queue. If the
+transmit queue has room for new messages, the ``POLLOUT`` and
+``POLLWRNORM`` flags are set. If there are events in the event queue,
+then the ``POLLPRI`` flag is set. When the function times out it returns
+a value of zero, on failure it returns -1 and the ``errno`` variable is
+set appropriately.
+
+For more details see the :c:func:`poll() <cec-poll>` manual page.
+
+
+Return Value
+============
+
+On success, :c:func:`poll() <cec-poll>` returns the number structures which have
+non-zero ``revents`` fields, or zero if the call timed out. On error -1
+is returned, and the ``errno`` variable is set appropriately:
+
+``EBADF``
+    One or more of the ``ufds`` members specify an invalid file
+    descriptor.
+
+``EFAULT``
+    ``ufds`` references an inaccessible memory area.
+
+``EINTR``
+    The call was interrupted by a signal.
+
+``EINVAL``
+    The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use
+    ``getrlimit()`` to obtain this value.
diff --git a/Documentation/userspace-api/media/cec/cec-funcs.rst b/Documentation/userspace-api/media/cec/cec-funcs.rst
new file mode 100644
index 000000000000..88966b5175d2
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-funcs.rst
@@ -0,0 +1,30 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _cec-user-func:
+
+******************
+Function Reference
+******************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    cec-func-open
+    cec-func-close
+    cec-func-ioctl
+    cec-func-poll
+    cec-ioc-adap-g-caps
+    cec-ioc-adap-g-log-addrs
+    cec-ioc-adap-g-phys-addr
+    cec-ioc-adap-g-conn-info
+    cec-ioc-dqevent
+    cec-ioc-g-mode
+    cec-ioc-receive
diff --git a/Documentation/userspace-api/media/cec/cec-header.rst b/Documentation/userspace-api/media/cec/cec-header.rst
new file mode 100644
index 000000000000..24a83b0c35af
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-header.rst
@@ -0,0 +1,17 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _cec_header:
+
+***************
+CEC Header File
+***************
+
+.. kernel-include:: $BUILDDIR/cec.h.rst
+
diff --git a/Documentation/userspace-api/media/cec/cec-intro.rst b/Documentation/userspace-api/media/cec/cec-intro.rst
new file mode 100644
index 000000000000..a4db82388202
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-intro.rst
@@ -0,0 +1,49 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _cec-intro:
+
+Introduction
+============
+
+HDMI connectors provide a single pin for use by the Consumer Electronics
+Control protocol. This protocol allows different devices connected by an
+HDMI cable to communicate. The protocol for CEC version 1.4 is defined
+in supplements 1 (CEC) and 2 (HEAC or HDMI Ethernet and Audio Return
+Channel) of the HDMI 1.4a (:ref:`hdmi`) specification and the
+extensions added to CEC version 2.0 are defined in chapter 11 of the
+HDMI 2.0 (:ref:`hdmi2`) specification.
+
+The bitrate is very slow (effectively no more than 36 bytes per second)
+and is based on the ancient AV.link protocol used in old SCART
+connectors. The protocol closely resembles a crazy Rube Goldberg
+contraption and is an unholy mix of low and high level messages. Some
+messages, especially those part of the HEAC protocol layered on top of
+CEC, need to be handled by the kernel, others can be handled either by
+the kernel or by userspace.
+
+In addition, CEC can be implemented in HDMI receivers, transmitters and
+in USB devices that have an HDMI input and an HDMI output and that
+control just the CEC pin.
+
+Drivers that support CEC will create a CEC device node (/dev/cecX) to
+give userspace access to the CEC adapter. The
+:ref:`CEC_ADAP_G_CAPS` ioctl will tell userspace what it is allowed to do.
+
+In order to check the support and test it, it is suggested to download
+the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ package. It
+provides three tools to handle CEC:
+
+- cec-ctl: the Swiss army knife of CEC. Allows you to configure, transmit
+  and monitor CEC messages.
+
+- cec-compliance: does a CEC compliance test of a remote CEC device to
+  determine how compliant the CEC implementation is.
+
+- cec-follower: emulates a CEC follower.
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst
new file mode 100644
index 000000000000..94e46a11d68d
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst
@@ -0,0 +1,150 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CEC_ADAP_G_CAPS:
+
+*********************
+ioctl CEC_ADAP_G_CAPS
+*********************
+
+Name
+====
+
+CEC_ADAP_G_CAPS - Query device capabilities
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, CEC_ADAP_G_CAPS, struct cec_caps *argp )
+    :name: CEC_ADAP_G_CAPS
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <cec-open>`.
+
+``argp``
+
+
+Description
+===========
+
+All cec devices must support :ref:`ioctl CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`. To query
+device information, applications call the ioctl with a pointer to a
+struct :c:type:`cec_caps`. The driver fills the structure and
+returns the information to the application. The ioctl never fails.
+
+.. tabularcolumns:: |p{1.2cm}|p{2.5cm}|p{13.8cm}|
+
+.. c:type:: cec_caps
+
+.. flat-table:: struct cec_caps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 16
+
+    * - char
+      - ``driver[32]``
+      - The name of the cec adapter driver.
+    * - char
+      - ``name[32]``
+      - The name of this CEC adapter. The combination ``driver`` and
+	``name`` must be unique.
+    * - __u32
+      - ``capabilities``
+      - The capabilities of the CEC adapter, see
+	:ref:`cec-capabilities`.
+    * - __u32
+      - ``version``
+      - CEC Framework API version, formatted with the ``KERNEL_VERSION()``
+	macro.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+
+.. _cec-capabilities:
+
+.. flat-table:: CEC Capabilities Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 8
+
+    * .. _`CEC-CAP-PHYS-ADDR`:
+
+      - ``CEC_CAP_PHYS_ADDR``
+      - 0x00000001
+      - Userspace has to configure the physical address by calling
+	:ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`. If
+	this capability isn't set, then setting the physical address is
+	handled by the kernel whenever the EDID is set (for an HDMI
+	receiver) or read (for an HDMI transmitter).
+    * .. _`CEC-CAP-LOG-ADDRS`:
+
+      - ``CEC_CAP_LOG_ADDRS``
+      - 0x00000002
+      - Userspace has to configure the logical addresses by calling
+	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. If
+	this capability isn't set, then the kernel will have configured
+	this.
+    * .. _`CEC-CAP-TRANSMIT`:
+
+      - ``CEC_CAP_TRANSMIT``
+      - 0x00000004
+      - Userspace can transmit CEC messages by calling
+	:ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. This implies that
+	userspace can be a follower as well, since being able to transmit
+	messages is a prerequisite of becoming a follower. If this
+	capability isn't set, then the kernel will handle all CEC
+	transmits and process all CEC messages it receives.
+    * .. _`CEC-CAP-PASSTHROUGH`:
+
+      - ``CEC_CAP_PASSTHROUGH``
+      - 0x00000008
+      - Userspace can use the passthrough mode by calling
+	:ref:`ioctl CEC_S_MODE <CEC_S_MODE>`.
+    * .. _`CEC-CAP-RC`:
+
+      - ``CEC_CAP_RC``
+      - 0x00000010
+      - This adapter supports the remote control protocol.
+    * .. _`CEC-CAP-MONITOR-ALL`:
+
+      - ``CEC_CAP_MONITOR_ALL``
+      - 0x00000020
+      - The CEC hardware can monitor all messages, not just directed and
+	broadcast messages.
+    * .. _`CEC-CAP-NEEDS-HPD`:
+
+      - ``CEC_CAP_NEEDS_HPD``
+      - 0x00000040
+      - The CEC hardware is only active if the HDMI Hotplug Detect pin is
+        high. This makes it impossible to use CEC to wake up displays that
+	set the HPD pin low when in standby mode, but keep the CEC bus
+	alive.
+    * .. _`CEC-CAP-MONITOR-PIN`:
+
+      - ``CEC_CAP_MONITOR_PIN``
+      - 0x00000080
+      - The CEC hardware can monitor CEC pin changes from low to high voltage
+        and vice versa. When in pin monitoring mode the application will
+	receive ``CEC_EVENT_PIN_CEC_LOW`` and ``CEC_EVENT_PIN_CEC_HIGH`` events.
+    * .. _`CEC-CAP-CONNECTOR-INFO`:
+
+      - ``CEC_CAP_CONNECTOR_INFO``
+      - 0x00000100
+      - If this capability is set, then :ref:`CEC_ADAP_G_CONNECTOR_INFO` can
+        be used.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst
new file mode 100644
index 000000000000..6818ddf1495c
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst
@@ -0,0 +1,105 @@
+.. SPDX-License-Identifier: GPL-2.0
+..
+.. Copyright 2019 Google LLC
+..
+.. _CEC_ADAP_G_CONNECTOR_INFO:
+
+*******************************
+ioctl CEC_ADAP_G_CONNECTOR_INFO
+*******************************
+
+Name
+====
+
+CEC_ADAP_G_CONNECTOR_INFO - Query HDMI connector information
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, CEC_ADAP_G_CONNECTOR_INFO, struct cec_connector_info *argp )
+    :name: CEC_ADAP_G_CONNECTOR_INFO
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <cec-open>`.
+
+``argp``
+
+
+Description
+===========
+
+Using this ioctl an application can learn which HDMI connector this CEC
+device corresponds to. While calling this ioctl the application should
+provide a pointer to a cec_connector_info struct which will be populated
+by the kernel with the info provided by the adapter's driver. This ioctl
+is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set.
+
+.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}|
+
+.. c:type:: cec_connector_info
+
+.. flat-table:: struct cec_connector_info
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 8
+
+    * - __u32
+      - ``type``
+      - The type of connector this adapter is associated with.
+    * - union {
+      - ``(anonymous)``
+    * - ``struct cec_drm_connector_info``
+      - drm
+      - :ref:`cec-drm-connector-info`
+    * - }
+      -
+
+
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+
+.. _connector-type:
+
+.. flat-table:: Connector types
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 8
+
+    * .. _`CEC-CONNECTOR-TYPE-NO-CONNECTOR`:
+
+      - ``CEC_CONNECTOR_TYPE_NO_CONNECTOR``
+      - 0
+      - No connector is associated with the adapter/the information is not
+        provided by the driver.
+    * .. _`CEC-CONNECTOR-TYPE-DRM`:
+
+      - ``CEC_CONNECTOR_TYPE_DRM``
+      - 1
+      - Indicates that a DRM connector is associated with this adapter.
+        Information about the connector can be found in
+	:ref:`cec-drm-connector-info`.
+
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+
+.. c:type:: cec_drm_connector_info
+
+.. _cec-drm-connector-info:
+
+.. flat-table:: struct cec_drm_connector_info
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 8
+
+    * .. _`CEC-DRM-CONNECTOR-TYPE-CARD-NO`:
+
+      - __u32
+      - ``card_no``
+      - DRM card number: the number from a card's path, e.g. 0 in case of
+        /dev/card0.
+    * .. _`CEC-DRM-CONNECTOR-TYPE-CONNECTOR_ID`:
+
+      - __u32
+      - ``connector_id``
+      - DRM connector ID.
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst
new file mode 100644
index 000000000000..8ba3511c88b8
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst
@@ -0,0 +1,378 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CEC_ADAP_LOG_ADDRS:
+.. _CEC_ADAP_G_LOG_ADDRS:
+.. _CEC_ADAP_S_LOG_ADDRS:
+
+****************************************************
+ioctls CEC_ADAP_G_LOG_ADDRS and CEC_ADAP_S_LOG_ADDRS
+****************************************************
+
+Name
+====
+
+CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS - Get or set the logical addresses
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, CEC_ADAP_G_LOG_ADDRS, struct cec_log_addrs *argp )
+   :name: CEC_ADAP_G_LOG_ADDRS
+
+.. c:function:: int ioctl( int fd, CEC_ADAP_S_LOG_ADDRS, struct cec_log_addrs *argp )
+   :name: CEC_ADAP_S_LOG_ADDRS
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <cec-open>`.
+
+``argp``
+    Pointer to struct :c:type:`cec_log_addrs`.
+
+Description
+===========
+
+To query the current CEC logical addresses, applications call
+:ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a
+struct :c:type:`cec_log_addrs` where the driver stores the logical addresses.
+
+To set new logical addresses, applications fill in
+struct :c:type:`cec_log_addrs` and call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
+with a pointer to this struct. The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
+is only available if ``CEC_CAP_LOG_ADDRS`` is set (the ``ENOTTY`` error code is
+returned otherwise). The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
+can only be called by a file descriptor in initiator mode (see :ref:`CEC_S_MODE`), if not
+the ``EBUSY`` error code will be returned.
+
+To clear existing logical addresses set ``num_log_addrs`` to 0. All other fields
+will be ignored in that case. The adapter will go to the unconfigured state and the
+``cec_version``, ``vendor_id`` and ``osd_name`` fields are all reset to their default
+values (CEC version 2.0, no vendor ID and an empty OSD name).
+
+If the physical address is valid (see :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`),
+then this ioctl will block until all requested logical
+addresses have been claimed. If the file descriptor is in non-blocking mode then it will
+not wait for the logical addresses to be claimed, instead it just returns 0.
+
+A :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` event is sent when the
+logical addresses are claimed or cleared.
+
+Attempting to call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` when
+logical address types are already defined will return with error ``EBUSY``.
+
+.. c:type:: cec_log_addrs
+
+.. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{7.5cm}|
+
+.. cssclass:: longtable
+
+.. flat-table:: struct cec_log_addrs
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 16
+
+    * - __u8
+      - ``log_addr[CEC_MAX_LOG_ADDRS]``
+      - The actual logical addresses that were claimed. This is set by the
+	driver. If no logical address could be claimed, then it is set to
+	``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then
+	``log_addr[0]`` is set to 0xf and all others to
+	``CEC_LOG_ADDR_INVALID``.
+    * - __u16
+      - ``log_addr_mask``
+      - The bitmask of all logical addresses this adapter has claimed. If
+	this adapter is Unregistered then ``log_addr_mask`` sets bit 15
+	and clears all other bits. If this adapter is not configured at
+	all, then ``log_addr_mask`` is set to 0. Set by the driver.
+    * - __u8
+      - ``cec_version``
+      - The CEC version that this adapter shall use. See
+	:ref:`cec-versions`. Used to implement the
+	``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages.
+	Note that :ref:`CEC_OP_CEC_VERSION_1_3A <CEC-OP-CEC-VERSION-1-3A>` is not allowed by the CEC
+	framework.
+    * - __u8
+      - ``num_log_addrs``
+      - Number of logical addresses to set up. Must be ≤
+	``available_log_addrs`` as returned by
+	:ref:`CEC_ADAP_G_CAPS`. All arrays in
+	this structure are only filled up to index
+	``available_log_addrs``-1. The remaining array elements will be
+	ignored. Note that the CEC 2.0 standard allows for a maximum of 2
+	logical addresses, although some hardware has support for more.
+	``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual
+	number of logical addresses it could claim, which may be less than
+	what was requested. If this field is set to 0, then the CEC
+	adapter shall clear all claimed logical addresses and all other
+	fields will be ignored.
+    * - __u32
+      - ``vendor_id``
+      - The vendor ID is a 24-bit number that identifies the specific
+	vendor or entity. Based on this ID vendor specific commands may be
+	defined. If you do not want a vendor ID then set it to
+	``CEC_VENDOR_ID_NONE``.
+    * - __u32
+      - ``flags``
+      - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags.
+    * - char
+      - ``osd_name[15]``
+      - The On-Screen Display name as is returned by the
+	``CEC_MSG_SET_OSD_NAME`` message.
+    * - __u8
+      - ``primary_device_type[CEC_MAX_LOG_ADDRS]``
+      - Primary device type for each logical address. See
+	:ref:`cec-prim-dev-types` for possible types.
+    * - __u8
+      - ``log_addr_type[CEC_MAX_LOG_ADDRS]``
+      - Logical address types. See :ref:`cec-log-addr-types` for
+	possible types. The driver will update this with the actual
+	logical address type that it claimed (e.g. it may have to fallback
+	to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED <CEC-LOG-ADDR-TYPE-UNREGISTERED>`).
+    * - __u8
+      - ``all_device_types[CEC_MAX_LOG_ADDRS]``
+      - CEC 2.0 specific: the bit mask of all device types. See
+	:ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0
+	``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave
+	this field to 0, or fill it in according to the CEC 2.0 guidelines to
+	give the CEC framework more information about the device type, even
+	though the framework won't use it directly in the CEC message.
+    * - __u8
+      - ``features[CEC_MAX_LOG_ADDRS][12]``
+      - Features for each logical address. It is used in the CEC 2.0
+	``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the
+	RC Profile and the Device Features. For CEC 1.4 you can either leave
+        this field to all 0, or fill it in according to the CEC 2.0 guidelines to
+        give the CEC framework more information about the device type, even
+        though the framework won't use it directly in the CEC message.
+
+
+.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
+
+.. _cec-log-addrs-flags:
+
+.. flat-table:: Flags for struct cec_log_addrs
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`:
+
+      - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK``
+      - 1
+      - By default if no logical address of the requested type can be claimed, then
+	it will go back to the unconfigured state. If this flag is set, then it will
+	fallback to the Unregistered logical address. Note that if the Unregistered
+	logical address was explicitly requested, then this flag has no effect.
+    * .. _`CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU`:
+
+      - ``CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU``
+      - 2
+      - By default the ``CEC_MSG_USER_CONTROL_PRESSED`` and ``CEC_MSG_USER_CONTROL_RELEASED``
+        messages are only passed on to the follower(s), if any. If this flag is set,
+	then these messages are also passed on to the remote control input subsystem
+	and will appear as keystrokes. This features needs to be enabled explicitly.
+	If CEC is used to enter e.g. passwords, then you may not want to enable this
+	to avoid trivial snooping of the keystrokes.
+    * .. _`CEC-LOG-ADDRS-FL-CDC-ONLY`:
+
+      - ``CEC_LOG_ADDRS_FL_CDC_ONLY``
+      - 4
+      - If this flag is set, then the device is CDC-Only. CDC-Only CEC devices
+	are CEC devices that can only handle CDC messages.
+
+	All other messages are ignored.
+
+
+.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
+
+.. _cec-versions:
+
+.. flat-table:: CEC Versions
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * .. _`CEC-OP-CEC-VERSION-1-3A`:
+
+      - ``CEC_OP_CEC_VERSION_1_3A``
+      - 4
+      - CEC version according to the HDMI 1.3a standard.
+    * .. _`CEC-OP-CEC-VERSION-1-4B`:
+
+      - ``CEC_OP_CEC_VERSION_1_4B``
+      - 5
+      - CEC version according to the HDMI 1.4b standard.
+    * .. _`CEC-OP-CEC-VERSION-2-0`:
+
+      - ``CEC_OP_CEC_VERSION_2_0``
+      - 6
+      - CEC version according to the HDMI 2.0 standard.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _cec-prim-dev-types:
+
+.. flat-table:: CEC Primary Device Types
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * .. _`CEC-OP-PRIM-DEVTYPE-TV`:
+
+      - ``CEC_OP_PRIM_DEVTYPE_TV``
+      - 0
+      - Use for a TV.
+    * .. _`CEC-OP-PRIM-DEVTYPE-RECORD`:
+
+      - ``CEC_OP_PRIM_DEVTYPE_RECORD``
+      - 1
+      - Use for a recording device.
+    * .. _`CEC-OP-PRIM-DEVTYPE-TUNER`:
+
+      - ``CEC_OP_PRIM_DEVTYPE_TUNER``
+      - 3
+      - Use for a device with a tuner.
+    * .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`:
+
+      - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK``
+      - 4
+      - Use for a playback device.
+    * .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`:
+
+      - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM``
+      - 5
+      - Use for an audio system (e.g. an audio/video receiver).
+    * .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`:
+
+      - ``CEC_OP_PRIM_DEVTYPE_SWITCH``
+      - 6
+      - Use for a CEC switch.
+    * .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`:
+
+      - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC``
+      - 7
+      - Use for a video processor device.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _cec-log-addr-types:
+
+.. flat-table:: CEC Logical Address Types
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 16
+
+    * .. _`CEC-LOG-ADDR-TYPE-TV`:
+
+      - ``CEC_LOG_ADDR_TYPE_TV``
+      - 0
+      - Use for a TV.
+    * .. _`CEC-LOG-ADDR-TYPE-RECORD`:
+
+      - ``CEC_LOG_ADDR_TYPE_RECORD``
+      - 1
+      - Use for a recording device.
+    * .. _`CEC-LOG-ADDR-TYPE-TUNER`:
+
+      - ``CEC_LOG_ADDR_TYPE_TUNER``
+      - 2
+      - Use for a tuner device.
+    * .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`:
+
+      - ``CEC_LOG_ADDR_TYPE_PLAYBACK``
+      - 3
+      - Use for a playback device.
+    * .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`:
+
+      - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM``
+      - 4
+      - Use for an audio system device.
+    * .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`:
+
+      - ``CEC_LOG_ADDR_TYPE_SPECIFIC``
+      - 5
+      - Use for a second TV or for a video processor device.
+    * .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`:
+
+      - ``CEC_LOG_ADDR_TYPE_UNREGISTERED``
+      - 6
+      - Use this if you just want to remain unregistered. Used for pure
+	CEC switches or CDC-only devices (CDC: Capability Discovery and
+	Control).
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _cec-all-dev-types-flags:
+
+.. flat-table:: CEC All Device Types Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * .. _`CEC-OP-ALL-DEVTYPE-TV`:
+
+      - ``CEC_OP_ALL_DEVTYPE_TV``
+      - 0x80
+      - This supports the TV type.
+    * .. _`CEC-OP-ALL-DEVTYPE-RECORD`:
+
+      - ``CEC_OP_ALL_DEVTYPE_RECORD``
+      - 0x40
+      - This supports the Recording type.
+    * .. _`CEC-OP-ALL-DEVTYPE-TUNER`:
+
+      - ``CEC_OP_ALL_DEVTYPE_TUNER``
+      - 0x20
+      - This supports the Tuner type.
+    * .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`:
+
+      - ``CEC_OP_ALL_DEVTYPE_PLAYBACK``
+      - 0x10
+      - This supports the Playback type.
+    * .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`:
+
+      - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM``
+      - 0x08
+      - This supports the Audio System type.
+    * .. _`CEC-OP-ALL-DEVTYPE-SWITCH`:
+
+      - ``CEC_OP_ALL_DEVTYPE_SWITCH``
+      - 0x04
+      - This supports the CEC Switch or Video Processing type.
+
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` can return the following
+error codes:
+
+ENOTTY
+    The ``CEC_CAP_LOG_ADDRS`` capability wasn't set, so this ioctl is not supported.
+
+EBUSY
+    The CEC adapter is currently configuring itself, or it is already configured and
+    ``num_log_addrs`` is non-zero, or another filehandle is in exclusive follower or
+    initiator mode, or the filehandle is in mode ``CEC_MODE_NO_INITIATOR``.
+
+EINVAL
+    The contents of struct :c:type:`cec_log_addrs` is invalid.
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst
new file mode 100644
index 000000000000..ce8f64c3e060
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst
@@ -0,0 +1,100 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CEC_ADAP_PHYS_ADDR:
+.. _CEC_ADAP_G_PHYS_ADDR:
+.. _CEC_ADAP_S_PHYS_ADDR:
+
+****************************************************
+ioctls CEC_ADAP_G_PHYS_ADDR and CEC_ADAP_S_PHYS_ADDR
+****************************************************
+
+Name
+====
+
+CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR - Get or set the physical address
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, CEC_ADAP_G_PHYS_ADDR, __u16 *argp )
+    :name: CEC_ADAP_G_PHYS_ADDR
+
+.. c:function:: int ioctl( int fd, CEC_ADAP_S_PHYS_ADDR, __u16 *argp )
+    :name: CEC_ADAP_S_PHYS_ADDR
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <cec-open>`.
+
+``argp``
+    Pointer to the CEC address.
+
+Description
+===========
+
+To query the current physical address applications call
+:ref:`ioctl CEC_ADAP_G_PHYS_ADDR <CEC_ADAP_G_PHYS_ADDR>` with a pointer to a __u16 where the
+driver stores the physical address.
+
+To set a new physical address applications store the physical address in
+a __u16 and call :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` with a pointer to
+this integer. The :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` is only available if
+``CEC_CAP_PHYS_ADDR`` is set (the ``ENOTTY`` error code will be returned
+otherwise). The :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` can only be called
+by a file descriptor in initiator mode (see :ref:`CEC_S_MODE`), if not
+the ``EBUSY`` error code will be returned.
+
+To clear an existing physical address use ``CEC_PHYS_ADDR_INVALID``.
+The adapter will go to the unconfigured state.
+
+If logical address types have been defined (see :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`),
+then this ioctl will block until all
+requested logical addresses have been claimed. If the file descriptor is in non-blocking mode
+then it will not wait for the logical addresses to be claimed, instead it just returns 0.
+
+A :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` event is sent when the physical address
+changes.
+
+The physical address is a 16-bit number where each group of 4 bits
+represent a digit of the physical address a.b.c.d where the most
+significant 4 bits represent 'a'. The CEC root device (usually the TV)
+has address 0.0.0.0. Every device that is hooked up to an input of the
+TV has address a.0.0.0 (where 'a' is ≥ 1), devices hooked up to those in
+turn have addresses a.b.0.0, etc. So a topology of up to 5 devices deep
+is supported. The physical address a device shall use is stored in the
+EDID of the sink.
+
+For example, the EDID for each HDMI input of the TV will have a
+different physical address of the form a.0.0.0 that the sources will
+read out and use as their physical address.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+The :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` can return the following
+error codes:
+
+ENOTTY
+    The ``CEC_CAP_PHYS_ADDR`` capability wasn't set, so this ioctl is not supported.
+
+EBUSY
+    Another filehandle is in exclusive follower or initiator mode, or the filehandle
+    is in mode ``CEC_MODE_NO_INITIATOR``.
+
+EINVAL
+    The physical address is malformed.
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst b/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst
new file mode 100644
index 000000000000..4a535fb64b4b
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst
@@ -0,0 +1,257 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CEC_DQEVENT:
+
+*****************
+ioctl CEC_DQEVENT
+*****************
+
+Name
+====
+
+CEC_DQEVENT - Dequeue a CEC event
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, CEC_DQEVENT, struct cec_event *argp )
+    :name: CEC_DQEVENT
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <cec-open>`.
+
+``argp``
+
+
+Description
+===========
+
+CEC devices can send asynchronous events. These can be retrieved by
+calling :c:func:`CEC_DQEVENT`. If the file descriptor is in
+non-blocking mode and no event is pending, then it will return -1 and
+set errno to the ``EAGAIN`` error code.
+
+The internal event queues are per-filehandle and per-event type. If
+there is no more room in a queue then the last event is overwritten with
+the new one. This means that intermediate results can be thrown away but
+that the latest event is always available. This also means that is it
+possible to read two successive events that have the same value (e.g.
+two :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` events with
+the same state). In that case the intermediate state changes were lost but
+it is guaranteed that the state did change in between the two events.
+
+.. tabularcolumns:: |p{1.2cm}|p{2.9cm}|p{13.4cm}|
+
+.. c:type:: cec_event_state_change
+
+.. flat-table:: struct cec_event_state_change
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 8
+
+    * - __u16
+      - ``phys_addr``
+      - The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no
+        valid physical address is set.
+    * - __u16
+      - ``log_addr_mask``
+      - The current set of claimed logical addresses. This is 0 if no logical
+        addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
+	If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
+	has the unregistered logical address. In that case all other bits are 0.
+    * - __u16
+      - ``have_conn_info``
+      - If non-zero, then HDMI connector information is available.
+        This field is only valid if ``CEC_CAP_CONNECTOR_INFO`` is set. If that
+        capability is set and ``have_conn_info`` is zero, then that indicates
+        that the HDMI connector device is not instantiated, either because
+        the HDMI driver is still configuring the device or because the HDMI
+        device was unbound.
+
+
+.. c:type:: cec_event_lost_msgs
+
+.. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.5cm}|
+
+.. flat-table:: struct cec_event_lost_msgs
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 16
+
+    * - __u32
+      - ``lost_msgs``
+      - Set to the number of lost messages since the filehandle was opened
+	or since the last time this event was dequeued for this
+	filehandle. The messages lost are the oldest messages. So when a
+	new message arrives and there is no more room, then the oldest
+	message is discarded to make room for the new one. The internal
+	size of the message queue guarantees that all messages received in
+	the last two seconds will be stored. Since messages should be
+	replied to within a second according to the CEC specification,
+	this is more than enough.
+
+
+.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}|
+
+.. c:type:: cec_event
+
+.. flat-table:: struct cec_event
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 8
+
+    * - __u64
+      - ``ts``
+      - Timestamp of the event in ns.
+
+	The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock.
+
+	To access the same clock from userspace use :c:func:`clock_gettime`.
+    * - __u32
+      - ``event``
+      - The CEC event type, see :ref:`cec-events`.
+    * - __u32
+      - ``flags``
+      - Event flags, see :ref:`cec-event-flags`.
+    * - union {
+      - (anonymous)
+    * - struct cec_event_state_change
+      - ``state_change``
+      - The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>`
+	event.
+    * - struct cec_event_lost_msgs
+      - ``lost_msgs``
+      - The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS <CEC-EVENT-LOST-MSGS>`
+	event.
+    * - }
+      -
+
+
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+
+.. _cec-events:
+
+.. flat-table:: CEC Events Types
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 16
+
+    * .. _`CEC-EVENT-STATE-CHANGE`:
+
+      - ``CEC_EVENT_STATE_CHANGE``
+      - 1
+      - Generated when the CEC Adapter's state changes. When open() is
+	called an initial event will be generated for that filehandle with
+	the CEC Adapter's state at that time.
+    * .. _`CEC-EVENT-LOST-MSGS`:
+
+      - ``CEC_EVENT_LOST_MSGS``
+      - 2
+      - Generated if one or more CEC messages were lost because the
+	application didn't dequeue CEC messages fast enough.
+    * .. _`CEC-EVENT-PIN-CEC-LOW`:
+
+      - ``CEC_EVENT_PIN_CEC_LOW``
+      - 3
+      - Generated if the CEC pin goes from a high voltage to a low voltage.
+        Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set.
+    * .. _`CEC-EVENT-PIN-CEC-HIGH`:
+
+      - ``CEC_EVENT_PIN_CEC_HIGH``
+      - 4
+      - Generated if the CEC pin goes from a low voltage to a high voltage.
+        Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set.
+    * .. _`CEC-EVENT-PIN-HPD-LOW`:
+
+      - ``CEC_EVENT_PIN_HPD_LOW``
+      - 5
+      - Generated if the HPD pin goes from a high voltage to a low voltage.
+	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set. When open() is called, the HPD pin can be read and
+	if the HPD is low, then an initial event will be generated for that
+	filehandle.
+    * .. _`CEC-EVENT-PIN-HPD-HIGH`:
+
+      - ``CEC_EVENT_PIN_HPD_HIGH``
+      - 6
+      - Generated if the HPD pin goes from a low voltage to a high voltage.
+	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set. When open() is called, the HPD pin can be read and
+	if the HPD is high, then an initial event will be generated for that
+	filehandle.
+    * .. _`CEC-EVENT-PIN-5V-LOW`:
+
+      - ``CEC_EVENT_PIN_5V_LOW``
+      - 6
+      - Generated if the 5V pin goes from a high voltage to a low voltage.
+	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set. When open() is called, the 5V pin can be read and
+	if the 5V is low, then an initial event will be generated for that
+	filehandle.
+    * .. _`CEC-EVENT-PIN-5V-HIGH`:
+
+      - ``CEC_EVENT_PIN_5V_HIGH``
+      - 7
+      - Generated if the 5V pin goes from a low voltage to a high voltage.
+	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set. When open() is called, the 5V pin can be read and
+	if the 5V is high, then an initial event will be generated for that
+	filehandle.
+
+
+.. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}|
+
+.. _cec-event-flags:
+
+.. flat-table:: CEC Event Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 8
+
+    * .. _`CEC-EVENT-FL-INITIAL-STATE`:
+
+      - ``CEC_EVENT_FL_INITIAL_STATE``
+      - 1
+      - Set for the initial events that are generated when the device is
+	opened. See the table above for which events do this. This allows
+	applications to learn the initial state of the CEC adapter at
+	open() time.
+    * .. _`CEC-EVENT-FL-DROPPED-EVENTS`:
+
+      - ``CEC_EVENT_FL_DROPPED_EVENTS``
+      - 2
+      - Set if one or more events of the given event type have been dropped.
+        This is an indication that the application cannot keep up.
+
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+The :ref:`ioctl CEC_DQEVENT <CEC_DQEVENT>` can return the following
+error codes:
+
+EAGAIN
+    This is returned when the filehandle is in non-blocking mode and there
+    are no pending events.
+
+ERESTARTSYS
+    An interrupt (e.g. Ctrl-C) arrived while in blocking mode waiting for
+    events to arrive.
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst b/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst
new file mode 100644
index 000000000000..2d3227e80b4f
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst
@@ -0,0 +1,301 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CEC_MODE:
+.. _CEC_G_MODE:
+.. _CEC_S_MODE:
+
+********************************
+ioctls CEC_G_MODE and CEC_S_MODE
+********************************
+
+CEC_G_MODE, CEC_S_MODE - Get or set exclusive use of the CEC adapter
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, CEC_G_MODE, __u32 *argp )
+   :name: CEC_G_MODE
+
+.. c:function:: int ioctl( int fd, CEC_S_MODE, __u32 *argp )
+   :name: CEC_S_MODE
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <cec-open>`.
+
+``argp``
+    Pointer to CEC mode.
+
+Description
+===========
+
+By default any filehandle can use :ref:`CEC_TRANSMIT`, but in order to prevent
+applications from stepping on each others toes it must be possible to
+obtain exclusive access to the CEC adapter. This ioctl sets the
+filehandle to initiator and/or follower mode which can be exclusive
+depending on the chosen mode. The initiator is the filehandle that is
+used to initiate messages, i.e. it commands other CEC devices. The
+follower is the filehandle that receives messages sent to the CEC
+adapter and processes them. The same filehandle can be both initiator
+and follower, or this role can be taken by two different filehandles.
+
+When a CEC message is received, then the CEC framework will decide how
+it will be processed. If the message is a reply to an earlier
+transmitted message, then the reply is sent back to the filehandle that
+is waiting for it. In addition the CEC framework will process it.
+
+If the message is not a reply, then the CEC framework will process it
+first. If there is no follower, then the message is just discarded and a
+feature abort is sent back to the initiator if the framework couldn't
+process it. If there is a follower, then the message is passed on to the
+follower who will use :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>` to dequeue
+the new message. The framework expects the follower to make the right
+decisions.
+
+The CEC framework will process core messages unless requested otherwise
+by the follower. The follower can enable the passthrough mode. In that
+case, the CEC framework will pass on most core messages without
+processing them and the follower will have to implement those messages.
+There are some messages that the core will always process, regardless of
+the passthrough mode. See :ref:`cec-core-processing` for details.
+
+If there is no initiator, then any CEC filehandle can use
+:ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. If there is an exclusive
+initiator then only that initiator can call
+:ref:`CEC_TRANSMIT`. The follower can of course
+always call :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`.
+
+Available initiator modes are:
+
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+
+.. _cec-mode-initiator_e:
+
+.. flat-table:: Initiator Modes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 16
+
+    * .. _`CEC-MODE-NO-INITIATOR`:
+
+      - ``CEC_MODE_NO_INITIATOR``
+      - 0x0
+      - This is not an initiator, i.e. it cannot transmit CEC messages or
+	make any other changes to the CEC adapter.
+    * .. _`CEC-MODE-INITIATOR`:
+
+      - ``CEC_MODE_INITIATOR``
+      - 0x1
+      - This is an initiator (the default when the device is opened) and
+	it can transmit CEC messages and make changes to the CEC adapter,
+	unless there is an exclusive initiator.
+    * .. _`CEC-MODE-EXCL-INITIATOR`:
+
+      - ``CEC_MODE_EXCL_INITIATOR``
+      - 0x2
+      - This is an exclusive initiator and this file descriptor is the
+	only one that can transmit CEC messages and make changes to the
+	CEC adapter. If someone else is already the exclusive initiator
+	then an attempt to become one will return the ``EBUSY`` error code
+	error.
+
+
+Available follower modes are:
+
+.. tabularcolumns:: |p{6.6cm}|p{0.9cm}|p{10.0cm}|
+
+.. _cec-mode-follower_e:
+
+.. cssclass:: longtable
+
+.. flat-table:: Follower Modes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 16
+
+    * .. _`CEC-MODE-NO-FOLLOWER`:
+
+      - ``CEC_MODE_NO_FOLLOWER``
+      - 0x00
+      - This is not a follower (the default when the device is opened).
+    * .. _`CEC-MODE-FOLLOWER`:
+
+      - ``CEC_MODE_FOLLOWER``
+      - 0x10
+      - This is a follower and it will receive CEC messages unless there
+	is an exclusive follower. You cannot become a follower if
+	:ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`
+	was specified, the ``EINVAL`` error code is returned in that case.
+    * .. _`CEC-MODE-EXCL-FOLLOWER`:
+
+      - ``CEC_MODE_EXCL_FOLLOWER``
+      - 0x20
+      - This is an exclusive follower and only this file descriptor will
+	receive CEC messages for processing. If someone else is already
+	the exclusive follower then an attempt to become one will return
+	the ``EBUSY`` error code. You cannot become a follower if
+	:ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`
+	was specified, the ``EINVAL`` error code is returned in that case.
+    * .. _`CEC-MODE-EXCL-FOLLOWER-PASSTHRU`:
+
+      - ``CEC_MODE_EXCL_FOLLOWER_PASSTHRU``
+      - 0x30
+      - This is an exclusive follower and only this file descriptor will
+	receive CEC messages for processing. In addition it will put the
+	CEC device into passthrough mode, allowing the exclusive follower
+	to handle most core messages instead of relying on the CEC
+	framework for that. If someone else is already the exclusive
+	follower then an attempt to become one will return the ``EBUSY`` error
+	code. You cannot become a follower if :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>`
+	is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` was specified,
+	the ``EINVAL`` error code is returned in that case.
+    * .. _`CEC-MODE-MONITOR-PIN`:
+
+      - ``CEC_MODE_MONITOR_PIN``
+      - 0xd0
+      - Put the file descriptor into pin monitoring mode. Can only be used in
+	combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`,
+	otherwise the ``EINVAL`` error code will be returned.
+	This mode requires that the :ref:`CEC_CAP_MONITOR_PIN <CEC-CAP-MONITOR-PIN>`
+	capability is set, otherwise the ``EINVAL`` error code is returned.
+	While in pin monitoring mode this file descriptor can receive the
+	``CEC_EVENT_PIN_CEC_LOW`` and ``CEC_EVENT_PIN_CEC_HIGH`` events to see the
+	low-level CEC pin transitions. This is very useful for debugging.
+	This mode is only allowed if the process has the ``CAP_NET_ADMIN``
+	capability. If that is not set, then the ``EPERM`` error code is returned.
+    * .. _`CEC-MODE-MONITOR`:
+
+      - ``CEC_MODE_MONITOR``
+      - 0xe0
+      - Put the file descriptor into monitor mode. Can only be used in
+	combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`,
+	otherwise the ``EINVAL`` error code will be returned.
+	In monitor mode all messages this CEC
+	device transmits and all messages it receives (both broadcast
+	messages and directed messages for one its logical addresses) will
+	be reported. This is very useful for debugging. This is only
+	allowed if the process has the ``CAP_NET_ADMIN`` capability. If
+	that is not set, then the ``EPERM`` error code is returned.
+    * .. _`CEC-MODE-MONITOR-ALL`:
+
+      - ``CEC_MODE_MONITOR_ALL``
+      - 0xf0
+      - Put the file descriptor into 'monitor all' mode. Can only be used
+	in combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise
+	the ``EINVAL`` error code will be returned. In 'monitor all' mode all messages
+	this CEC device transmits and all messages it receives, including
+	directed messages for other CEC devices will be reported. This is
+	very useful for debugging, but not all devices support this. This
+	mode requires that the :ref:`CEC_CAP_MONITOR_ALL <CEC-CAP-MONITOR-ALL>` capability is set,
+	otherwise the ``EINVAL`` error code is returned. This is only allowed if
+	the process has the ``CAP_NET_ADMIN`` capability. If that is not
+	set, then the ``EPERM`` error code is returned.
+
+
+Core message processing details:
+
+.. tabularcolumns:: |p{6.6cm}|p{10.9cm}|
+
+.. _cec-core-processing:
+
+.. flat-table:: Core Message Processing
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 8
+
+    * .. _`CEC-MSG-GET-CEC-VERSION`:
+
+      - ``CEC_MSG_GET_CEC_VERSION``
+      - The core will return the CEC version that was set with
+	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`,
+	except when in passthrough mode. In passthrough mode the core
+	does nothing and this message has to be handled by a follower
+	instead.
+    * .. _`CEC-MSG-GIVE-DEVICE-VENDOR-ID`:
+
+      - ``CEC_MSG_GIVE_DEVICE_VENDOR_ID``
+      - The core will return the vendor ID that was set with
+	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`,
+	except when in passthrough mode. In passthrough mode the core
+	does nothing and this message has to be handled by a follower
+	instead.
+    * .. _`CEC-MSG-ABORT`:
+
+      - ``CEC_MSG_ABORT``
+      - The core will return a Feature Abort message with reason
+        'Feature Refused' as per the specification, except when in
+	passthrough mode. In passthrough mode the core does nothing
+	and this message has to be handled by a follower instead.
+    * .. _`CEC-MSG-GIVE-PHYSICAL-ADDR`:
+
+      - ``CEC_MSG_GIVE_PHYSICAL_ADDR``
+      - The core will report the current physical address, except when
+        in passthrough mode. In passthrough mode the core does nothing
+	and this message has to be handled by a follower instead.
+    * .. _`CEC-MSG-GIVE-OSD-NAME`:
+
+      - ``CEC_MSG_GIVE_OSD_NAME``
+      - The core will report the current OSD name that was set with
+	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`,
+	except when in passthrough mode. In passthrough mode the core
+	does nothing and this message has to be handled by a follower
+	instead.
+    * .. _`CEC-MSG-GIVE-FEATURES`:
+
+      - ``CEC_MSG_GIVE_FEATURES``
+      - The core will do nothing if the CEC version is older than 2.0,
+        otherwise it will report the current features that were set with
+	:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`,
+	except when in passthrough mode. In passthrough mode the core
+	does nothing (for any CEC version) and this message has to be handled
+	by a follower instead.
+    * .. _`CEC-MSG-USER-CONTROL-PRESSED`:
+
+      - ``CEC_MSG_USER_CONTROL_PRESSED``
+      - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set and if
+        :ref:`CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU <CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU>`
+	is set, then generate a remote control key
+	press. This message is always passed on to the follower(s).
+    * .. _`CEC-MSG-USER-CONTROL-RELEASED`:
+
+      - ``CEC_MSG_USER_CONTROL_RELEASED``
+      - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set and if
+        :ref:`CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU <CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU>`
+        is set, then generate a remote control key
+	release. This message is always passed on to the follower(s).
+    * .. _`CEC-MSG-REPORT-PHYSICAL-ADDR`:
+
+      - ``CEC_MSG_REPORT_PHYSICAL_ADDR``
+      - The CEC framework will make note of the reported physical address
+	and then just pass the message on to the follower(s).
+
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+The :ref:`ioctl CEC_S_MODE <CEC_S_MODE>` can return the following
+error codes:
+
+EINVAL
+    The requested mode is invalid.
+
+EPERM
+    Monitor mode is requested, but the process does have the ``CAP_NET_ADMIN``
+    capability.
+
+EBUSY
+    Someone else is already an exclusive follower or initiator.
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-receive.rst b/Documentation/userspace-api/media/cec/cec-ioc-receive.rst
new file mode 100644
index 000000000000..e456b2bc92a1
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-ioc-receive.rst
@@ -0,0 +1,391 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CEC_TRANSMIT:
+.. _CEC_RECEIVE:
+
+***********************************
+ioctls CEC_RECEIVE and CEC_TRANSMIT
+***********************************
+
+Name
+====
+
+CEC_RECEIVE, CEC_TRANSMIT - Receive or transmit a CEC message
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, CEC_RECEIVE, struct cec_msg \*argp )
+    :name: CEC_RECEIVE
+
+.. c:function:: int ioctl( int fd, CEC_TRANSMIT, struct cec_msg \*argp )
+    :name: CEC_TRANSMIT
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <cec-open>`.
+
+``argp``
+    Pointer to struct cec_msg.
+
+Description
+===========
+
+To receive a CEC message the application has to fill in the
+``timeout`` field of struct :c:type:`cec_msg` and pass it to
+:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
+If the file descriptor is in non-blocking mode and there are no received
+messages pending, then it will return -1 and set errno to the ``EAGAIN``
+error code. If the file descriptor is in blocking mode and ``timeout``
+is non-zero and no message arrived within ``timeout`` milliseconds, then
+it will return -1 and set errno to the ``ETIMEDOUT`` error code.
+
+A received message can be:
+
+1. a message received from another CEC device (the ``sequence`` field will
+   be 0).
+2. the result of an earlier non-blocking transmit (the ``sequence`` field will
+   be non-zero).
+
+To send a CEC message the application has to fill in the struct
+:c:type:`cec_msg` and pass it to :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`.
+The :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` is only available if
+``CEC_CAP_TRANSMIT`` is set. If there is no more room in the transmit
+queue, then it will return -1 and set errno to the ``EBUSY`` error code.
+The transmit queue has enough room for 18 messages (about 1 second worth
+of 2-byte messages). Note that the CEC kernel framework will also reply
+to core messages (see :ref:`cec-core-processing`), so it is not a good
+idea to fully fill up the transmit queue.
+
+If the file descriptor is in non-blocking mode then the transmit will
+return 0 and the result of the transmit will be available via
+:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>` once the transmit has finished
+(including waiting for a reply, if requested).
+
+The ``sequence`` field is filled in for every transmit and this can be
+checked against the received messages to find the corresponding transmit
+result.
+
+Normally calling :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` when the physical
+address is invalid (due to e.g. a disconnect) will return ``ENONET``.
+
+However, the CEC specification allows sending messages from 'Unregistered' to
+'TV' when the physical address is invalid since some TVs pull the hotplug detect
+pin of the HDMI connector low when they go into standby, or when switching to
+another input.
+
+When the hotplug detect pin goes low the EDID disappears, and thus the
+physical address, but the cable is still connected and CEC still works.
+In order to detect/wake up the device it is allowed to send poll and 'Image/Text
+View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
+
+.. tabularcolumns:: |p{1.0cm}|p{3.5cm}|p{13.0cm}|
+
+.. c:type:: cec_msg
+
+.. cssclass:: longtable
+
+.. flat-table:: struct cec_msg
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 16
+
+    * - __u64
+      - ``tx_ts``
+      - Timestamp in ns of when the last byte of the message was transmitted.
+	The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
+	the same clock from userspace use :c:func:`clock_gettime`.
+    * - __u64
+      - ``rx_ts``
+      - Timestamp in ns of when the last byte of the message was received.
+	The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
+	the same clock from userspace use :c:func:`clock_gettime`.
+    * - __u32
+      - ``len``
+      - The length of the message. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in
+	by the application. The driver will fill this in for
+	:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be
+	filled in by the driver with the length of the reply message if ``reply`` was set.
+    * - __u32
+      - ``timeout``
+      - The timeout in milliseconds. This is the time the device will wait
+	for a message to be received before timing out. If it is set to 0,
+	then it will wait indefinitely when it is called by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
+	If it is 0 and it is called by :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`,
+	then it will be replaced by 1000 if the ``reply`` is non-zero or
+	ignored if ``reply`` is 0.
+    * - __u32
+      - ``sequence``
+      - A non-zero sequence number is automatically assigned by the CEC framework
+	for all transmitted messages. It is used by the CEC framework when it queues
+	the transmit result (when transmit was called in non-blocking mode). This
+	allows the application to associate the received message with the original
+	transmit.
+    * - __u32
+      - ``flags``
+      - Flags. See :ref:`cec-msg-flags` for a list of available flags.
+    * - __u8
+      - ``tx_status``
+      - The status bits of the transmitted message. See
+	:ref:`cec-tx-status` for the possible status values. It is 0 if
+	this message was received, not transmitted.
+    * - __u8
+      - ``msg[16]``
+      - The message payload. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in by the
+	application. The driver will fill this in for :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
+	For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be filled in by the driver with
+	the payload of the reply message if ``timeout`` was set.
+    * - __u8
+      - ``reply``
+      - Wait until this message is replied. If ``reply`` is 0 and the
+	``timeout`` is 0, then don't wait for a reply but return after
+	transmitting the message. Ignored by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
+	The case where ``reply`` is 0 (this is the opcode for the Feature Abort
+	message) and ``timeout`` is non-zero is specifically allowed to make it
+	possible to send a message and wait up to ``timeout`` milliseconds for a
+	Feature Abort reply. In this case ``rx_status`` will either be set
+	to :ref:`CEC_RX_STATUS_TIMEOUT <CEC-RX-STATUS-TIMEOUT>` or
+	:ref:`CEC_RX_STATUS_FEATURE_ABORT <CEC-RX-STATUS-FEATURE-ABORT>`.
+
+	If the transmitter message is ``CEC_MSG_INITIATE_ARC`` then the ``reply``
+	values ``CEC_MSG_REPORT_ARC_INITIATED`` and ``CEC_MSG_REPORT_ARC_TERMINATED``
+	are processed differently: either value will match both possible replies.
+	The reason is that the ``CEC_MSG_INITIATE_ARC`` message is the only CEC
+	message that has two possible replies other than Feature Abort. The
+	``reply`` field will be updated with the actual reply so that it is
+	synchronized with the contents of the received message.
+    * - __u8
+      - ``rx_status``
+      - The status bits of the received message. See
+	:ref:`cec-rx-status` for the possible status values. It is 0 if
+	this message was transmitted, not received, unless this is the
+	reply to a transmitted message. In that case both ``rx_status``
+	and ``tx_status`` are set.
+    * - __u8
+      - ``tx_status``
+      - The status bits of the transmitted message. See
+	:ref:`cec-tx-status` for the possible status values. It is 0 if
+	this message was received, not transmitted.
+    * - __u8
+      - ``tx_arb_lost_cnt``
+      - A counter of the number of transmit attempts that resulted in the
+	Arbitration Lost error. This is only set if the hardware supports
+	this, otherwise it is always 0. This counter is only valid if the
+	:ref:`CEC_TX_STATUS_ARB_LOST <CEC-TX-STATUS-ARB-LOST>` status bit is set.
+    * - __u8
+      - ``tx_nack_cnt``
+      - A counter of the number of transmit attempts that resulted in the
+	Not Acknowledged error. This is only set if the hardware supports
+	this, otherwise it is always 0. This counter is only valid if the
+	:ref:`CEC_TX_STATUS_NACK <CEC-TX-STATUS-NACK>` status bit is set.
+    * - __u8
+      - ``tx_low_drive_cnt``
+      - A counter of the number of transmit attempts that resulted in the
+	Arbitration Lost error. This is only set if the hardware supports
+	this, otherwise it is always 0. This counter is only valid if the
+	:ref:`CEC_TX_STATUS_LOW_DRIVE <CEC-TX-STATUS-LOW-DRIVE>` status bit is set.
+    * - __u8
+      - ``tx_error_cnt``
+      - A counter of the number of transmit errors other than Arbitration
+	Lost or Not Acknowledged. This is only set if the hardware
+	supports this, otherwise it is always 0. This counter is only
+	valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set.
+
+
+.. tabularcolumns:: |p{6.2cm}|p{1.0cm}|p{10.3cm}|
+
+.. _cec-msg-flags:
+
+.. flat-table:: Flags for struct cec_msg
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * .. _`CEC-MSG-FL-REPLY-TO-FOLLOWERS`:
+
+      - ``CEC_MSG_FL_REPLY_TO_FOLLOWERS``
+      - 1
+      - If a CEC transmit expects a reply, then by default that reply is only sent to
+	the filehandle that called :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. If this
+	flag is set, then the reply is also sent to all followers, if any. If the
+	filehandle that called :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` is also a
+	follower, then that filehandle will receive the reply twice: once as the
+	result of the :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`, and once via
+	:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
+
+    * .. _`CEC-MSG-FL-RAW`:
+
+      - ``CEC_MSG_FL_RAW``
+      - 2
+      - Normally CEC messages are validated before transmitting them. If this
+        flag is set when :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` is called,
+	then no validation takes place and the message is transmitted as-is.
+	This is useful when debugging CEC issues.
+	This flag is only allowed if the process has the ``CAP_SYS_RAWIO``
+	capability. If that is not set, then the ``EPERM`` error code is
+	returned.
+
+
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+
+.. _cec-tx-status:
+
+.. flat-table:: CEC Transmit Status
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 16
+
+    * .. _`CEC-TX-STATUS-OK`:
+
+      - ``CEC_TX_STATUS_OK``
+      - 0x01
+      - The message was transmitted successfully. This is mutually
+	exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES <CEC-TX-STATUS-MAX-RETRIES>`.
+	Other bits can still be set if earlier attempts met with failure before
+	the transmit was eventually successful.
+    * .. _`CEC-TX-STATUS-ARB-LOST`:
+
+      - ``CEC_TX_STATUS_ARB_LOST``
+      - 0x02
+      - CEC line arbitration was lost, i.e. another transmit started at the
+        same time with a higher priority. Optional status, not all hardware
+	can detect this error condition.
+    * .. _`CEC-TX-STATUS-NACK`:
+
+      - ``CEC_TX_STATUS_NACK``
+      - 0x04
+      - Message was not acknowledged. Note that some hardware cannot tell apart
+        a 'Not Acknowledged' status from other error conditions, i.e. the result
+	of a transmit is just OK or FAIL. In that case this status will be
+	returned when the transmit failed.
+    * .. _`CEC-TX-STATUS-LOW-DRIVE`:
+
+      - ``CEC_TX_STATUS_LOW_DRIVE``
+      - 0x08
+      - Low drive was detected on the CEC bus. This indicates that a
+	follower detected an error on the bus and requests a
+	retransmission. Optional status, not all hardware can detect this
+	error condition.
+    * .. _`CEC-TX-STATUS-ERROR`:
+
+      - ``CEC_TX_STATUS_ERROR``
+      - 0x10
+      - Some error occurred. This is used for any errors that do not fit
+	``CEC_TX_STATUS_ARB_LOST`` or ``CEC_TX_STATUS_LOW_DRIVE``, either because
+	the hardware could not tell which error occurred, or because the hardware
+	tested for other conditions besides those two. Optional status.
+    * .. _`CEC-TX-STATUS-MAX-RETRIES`:
+
+      - ``CEC_TX_STATUS_MAX_RETRIES``
+      - 0x20
+      - The transmit failed after one or more retries. This status bit is
+	mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`.
+	Other bits can still be set to explain which failures were seen.
+    * .. _`CEC-TX-STATUS-ABORTED`:
+
+      - ``CEC_TX_STATUS_ABORTED``
+      - 0x40
+      - The transmit was aborted due to an HDMI disconnect, or the adapter
+        was unconfigured, or a transmit was interrupted, or the driver
+	returned an error when attempting to start a transmit.
+    * .. _`CEC-TX-STATUS-TIMEOUT`:
+
+      - ``CEC_TX_STATUS_TIMEOUT``
+      - 0x80
+      - The transmit timed out. This should not normally happen and this
+	indicates a driver problem.
+
+
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+
+.. _cec-rx-status:
+
+.. flat-table:: CEC Receive Status
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 16
+
+    * .. _`CEC-RX-STATUS-OK`:
+
+      - ``CEC_RX_STATUS_OK``
+      - 0x01
+      - The message was received successfully.
+    * .. _`CEC-RX-STATUS-TIMEOUT`:
+
+      - ``CEC_RX_STATUS_TIMEOUT``
+      - 0x02
+      - The reply to an earlier transmitted message timed out.
+    * .. _`CEC-RX-STATUS-FEATURE-ABORT`:
+
+      - ``CEC_RX_STATUS_FEATURE_ABORT``
+      - 0x04
+      - The message was received successfully but the reply was
+	``CEC_MSG_FEATURE_ABORT``. This status is only set if this message
+	was the reply to an earlier transmitted message.
+    * .. _`CEC-RX-STATUS-ABORTED`:
+
+      - ``CEC_RX_STATUS_ABORTED``
+      - 0x08
+      - The wait for a reply to an earlier transmitted message was aborted
+        because the HDMI cable was disconnected, the adapter was unconfigured
+	or the :ref:`CEC_TRANSMIT <CEC_RECEIVE>` that waited for a
+	reply was interrupted.
+
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+The :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>` can return the following
+error codes:
+
+EAGAIN
+    No messages are in the receive queue, and the filehandle is in non-blocking mode.
+
+ETIMEDOUT
+    The ``timeout`` was reached while waiting for a message.
+
+ERESTARTSYS
+    The wait for a message was interrupted (e.g. by Ctrl-C).
+
+The :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` can return the following
+error codes:
+
+ENOTTY
+    The ``CEC_CAP_TRANSMIT`` capability wasn't set, so this ioctl is not supported.
+
+EPERM
+    The CEC adapter is not configured, i.e. :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
+    has never been called, or ``CEC_MSG_FL_RAW`` was used from a process that
+    did not have the ``CAP_SYS_RAWIO`` capability.
+
+ENONET
+    The CEC adapter is not configured, i.e. :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
+    was called, but the physical address is invalid so no logical address was claimed.
+    An exception is made in this case for transmits from initiator 0xf ('Unregistered')
+    to destination 0 ('TV'). In that case the transmit will proceed as usual.
+
+EBUSY
+    Another filehandle is in exclusive follower or initiator mode, or the filehandle
+    is in mode ``CEC_MODE_NO_INITIATOR``. This is also returned if the transmit
+    queue is full.
+
+EINVAL
+    The contents of struct :c:type:`cec_msg` is invalid.
+
+ERESTARTSYS
+    The wait for a successful transmit was interrupted (e.g. by Ctrl-C).
diff --git a/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst b/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst
new file mode 100644
index 000000000000..78632199324d
--- /dev/null
+++ b/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst
@@ -0,0 +1,334 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+CEC Pin Framework Error Injection
+=================================
+
+The CEC Pin Framework is a core CEC framework for CEC hardware that only
+has low-level support for the CEC bus. Most hardware today will have
+high-level CEC support where the hardware deals with driving the CEC bus,
+but some older devices aren't that fancy. However, this framework also
+allows you to connect the CEC pin to a GPIO on e.g. a Raspberry Pi and
+you have now made a CEC adapter.
+
+What makes doing this so interesting is that since we have full control
+over the bus it is easy to support error injection. This is ideal to
+test how well CEC adapters can handle error conditions.
+
+Currently only the cec-gpio driver (when the CEC line is directly
+connected to a pull-up GPIO line) and the AllWinner A10/A20 drm driver
+support this framework.
+
+If ``CONFIG_CEC_PIN_ERROR_INJ`` is enabled, then error injection is available
+through debugfs. Specifically, in ``/sys/kernel/debug/cec/cecX/`` there is
+now an ``error-inj`` file.
+
+.. note::
+
+    The error injection commands are not a stable ABI and may change in the
+    future.
+
+With ``cat error-inj`` you can see both the possible commands and the current
+error injection status::
+
+	$ cat /sys/kernel/debug/cec/cec0/error-inj
+	# Clear error injections:
+	#   clear          clear all rx and tx error injections
+	#   rx-clear       clear all rx error injections
+	#   tx-clear       clear all tx error injections
+	#   <op> clear     clear all rx and tx error injections for <op>
+	#   <op> rx-clear  clear all rx error injections for <op>
+	#   <op> tx-clear  clear all tx error injections for <op>
+	#
+	# RX error injection:
+	#   <op>[,<mode>] rx-nack              NACK the message instead of sending an ACK
+	#   <op>[,<mode>] rx-low-drive <bit>   force a low-drive condition at this bit position
+	#   <op>[,<mode>] rx-add-byte          add a spurious byte to the received CEC message
+	#   <op>[,<mode>] rx-remove-byte       remove the last byte from the received CEC message
+	#   <op>[,<mode>] rx-arb-lost <poll>   generate a POLL message to trigger an arbitration lost
+	#
+	# TX error injection settings:
+	#   tx-ignore-nack-until-eom           ignore early NACKs until EOM
+	#   tx-custom-low-usecs <usecs>        define the 'low' time for the custom pulse
+	#   tx-custom-high-usecs <usecs>       define the 'high' time for the custom pulse
+	#   tx-custom-pulse                    transmit the custom pulse once the bus is idle
+	#
+	# TX error injection:
+	#   <op>[,<mode>] tx-no-eom            don't set the EOM bit
+	#   <op>[,<mode>] tx-early-eom         set the EOM bit one byte too soon
+	#   <op>[,<mode>] tx-add-bytes <num>   append <num> (1-255) spurious bytes to the message
+	#   <op>[,<mode>] tx-remove-byte       drop the last byte from the message
+	#   <op>[,<mode>] tx-short-bit <bit>   make this bit shorter than allowed
+	#   <op>[,<mode>] tx-long-bit <bit>    make this bit longer than allowed
+	#   <op>[,<mode>] tx-custom-bit <bit>  send the custom pulse instead of this bit
+	#   <op>[,<mode>] tx-short-start       send a start pulse that's too short
+	#   <op>[,<mode>] tx-long-start        send a start pulse that's too long
+	#   <op>[,<mode>] tx-custom-start      send the custom pulse instead of the start pulse
+	#   <op>[,<mode>] tx-last-bit <bit>    stop sending after this bit
+	#   <op>[,<mode>] tx-low-drive <bit>   force a low-drive condition at this bit position
+	#
+	# <op>       CEC message opcode (0-255) or 'any'
+	# <mode>     'once' (default), 'always', 'toggle' or 'off'
+	# <bit>      CEC message bit (0-159)
+	#            10 bits per 'byte': bits 0-7: data, bit 8: EOM, bit 9: ACK
+	# <poll>     CEC poll message used to test arbitration lost (0x00-0xff, default 0x0f)
+	# <usecs>    microseconds (0-10000000, default 1000)
+
+	clear
+
+You can write error injection commands to ``error-inj`` using
+``echo 'cmd' >error-inj`` or ``cat cmd.txt >error-inj``. The ``cat error-inj``
+output contains the current error commands. You can save the output to a file
+and use it as an input to ``error-inj`` later.
+
+Basic Syntax
+------------
+
+Leading spaces/tabs are ignored. If the next character is a ``#`` or the end
+of the line was reached, then the whole line is ignored. Otherwise a command
+is expected.
+
+The error injection commands fall in two main groups: those relating to
+receiving CEC messages and those relating to transmitting CEC messages. In
+addition, there are commands to clear existing error injection commands and
+to create custom pulses on the CEC bus.
+
+Most error injection commands can be executed for specific CEC opcodes or for
+all opcodes (``any``). Each command also has a 'mode' which can be ``off``
+(can be used to turn off an existing error injection command), ``once``
+(the default) which will trigger the error injection only once for the next
+received or transmitted message, ``always`` to always trigger the error
+injection and ``toggle`` to toggle the error injection on or off for every
+transmit or receive.
+
+So '``any rx-nack``' will NACK the next received CEC message,
+'``any,always rx-nack``' will NACK all received CEC messages and
+'``0x82,toggle rx-nack``' will only NACK if an Active Source message was
+received and do that only for every other received message.
+
+After an error was injected with mode ``once`` the error injection command
+is cleared automatically, so ``once`` is a one-time deal.
+
+All combinations of ``<op>`` and error injection commands can co-exist. So
+this is fine::
+
+	0x9e tx-add-bytes 1
+	0x9e tx-early-eom
+	0x9f tx-add-bytes 2
+	any rx-nack
+
+All four error injection commands will be active simultaneously.
+
+However, if the same ``<op>`` and command combination is specified,
+but with different arguments::
+
+	0x9e tx-add-bytes 1
+	0x9e tx-add-bytes 2
+
+Then the second will overwrite the first.
+
+Clear Error Injections
+----------------------
+
+``clear``
+    Clear all error injections.
+
+``rx-clear``
+    Clear all receive error injections
+
+``tx-clear``
+    Clear all transmit error injections
+
+``<op> clear``
+    Clear all error injections for the given opcode.
+
+``<op> rx-clear``
+    Clear all receive error injections for the given opcode.
+
+``<op> tx-clear``
+    Clear all transmit error injections for the given opcode.
+
+Receive Messages
+----------------
+
+``<op>[,<mode>] rx-nack``
+    NACK broadcast messages and messages directed to this CEC adapter.
+    Every byte of the message will be NACKed in case the transmitter
+    keeps transmitting after the first byte was NACKed.
+
+``<op>[,<mode>] rx-low-drive <bit>``
+    Force a Low Drive condition at this bit position. If <op> specifies
+    a specific CEC opcode then the bit position must be at least 18,
+    otherwise the opcode hasn't been received yet. This tests if the
+    transmitter can handle the Low Drive condition correctly and reports
+    the error correctly. Note that a Low Drive in the first 4 bits can also
+    be interpreted as an Arbitration Lost condition by the transmitter.
+    This is implementation dependent.
+
+``<op>[,<mode>] rx-add-byte``
+    Add a spurious 0x55 byte to the received CEC message, provided
+    the message was 15 bytes long or less. This is useful to test
+    the high-level protocol since spurious bytes should be ignored.
+
+``<op>[,<mode>] rx-remove-byte``
+    Remove the last byte from the received CEC message, provided it
+    was at least 2 bytes long. This is useful to test the high-level
+    protocol since messages that are too short should be ignored.
+
+``<op>[,<mode>] rx-arb-lost <poll>``
+    Generate a POLL message to trigger an Arbitration Lost condition.
+    This command is only allowed for ``<op>`` values of ``next`` or ``all``.
+    As soon as a start bit has been received the CEC adapter will switch
+    to transmit mode and it will transmit a POLL message. By default this is
+    0x0f, but it can also be specified explicitly via the ``<poll>`` argument.
+
+    This command can be used to test the Arbitration Lost condition in
+    the remote CEC transmitter. Arbitration happens when two CEC adapters
+    start sending a message at the same time. In that case the initiator
+    with the most leading zeroes wins and the other transmitter has to
+    stop transmitting ('Arbitration Lost'). This is very hard to test,
+    except by using this error injection command.
+
+    This does not work if the remote CEC transmitter has logical address
+    0 ('TV') since that will always win.
+
+Transmit Messages
+-----------------
+
+``tx-ignore-nack-until-eom``
+    This setting changes the behavior of transmitting CEC messages. Normally
+    as soon as the receiver NACKs a byte the transmit will stop, but the
+    specification also allows that the full message is transmitted and only
+    at the end will the transmitter look at the ACK bit. This is not
+    recommended behavior since there is no point in keeping the CEC bus busy
+    for longer than is strictly needed. Especially given how slow the bus is.
+
+    This setting can be used to test how well a receiver deals with
+    transmitters that ignore NACKs until the very end of the message.
+
+``<op>[,<mode>] tx-no-eom``
+    Don't set the EOM bit. Normally the last byte of the message has the EOM
+    (End-Of-Message) bit set. With this command the transmit will just stop
+    without ever sending an EOM. This can be used to test how a receiver
+    handles this case. Normally receivers have a time-out after which
+    they will go back to the Idle state.
+
+``<op>[,<mode>] tx-early-eom``
+    Set the EOM bit one byte too soon. This obviously only works for messages
+    of two bytes or more. The EOM bit will be set for the second-to-last byte
+    and not for the final byte. The receiver should ignore the last byte in
+    this case. Since the resulting message is likely to be too short for this
+    same reason the whole message is typically ignored. The receiver should be
+    in Idle state after the last byte was transmitted.
+
+``<op>[,<mode>] tx-add-bytes <num>``
+    Append ``<num>`` (1-255) spurious bytes to the message. The extra bytes
+    have the value of the byte position in the message. So if you transmit a
+    two byte message (e.g. a Get CEC Version message) and add 2 bytes, then
+    the full message received by the remote CEC adapter is
+    ``0x40 0x9f 0x02 0x03``.
+
+    This command can be used to test buffer overflows in the receiver. E.g.
+    what does it do when it receives more than the maximum message size of 16
+    bytes.
+
+``<op>[,<mode>] tx-remove-byte``
+    Drop the last byte from the message, provided the message is at least
+    two bytes long. The receiver should ignore messages that are too short.
+
+``<op>[,<mode>] tx-short-bit <bit>``
+    Make this bit period shorter than allowed. The bit position cannot be
+    an Ack bit.  If <op> specifies a specific CEC opcode then the bit position
+    must be at least 18, otherwise the opcode hasn't been received yet.
+    Normally the period of a data bit is between 2.05 and 2.75 milliseconds.
+    With this command the period of this bit is 1.8 milliseconds, this is
+    done by reducing the time the CEC bus is high. This bit period is less
+    than is allowed and the receiver should respond with a Low Drive
+    condition.
+
+    This command is ignored for 0 bits in bit positions 0 to 3. This is
+    because the receiver also looks for an Arbitration Lost condition in
+    those first four bits and it is undefined what will happen if it
+    sees a too-short 0 bit.
+
+``<op>[,<mode>] tx-long-bit <bit>``
+    Make this bit period longer than is valid. The bit position cannot be
+    an Ack bit.  If <op> specifies a specific CEC opcode then the bit position
+    must be at least 18, otherwise the opcode hasn't been received yet.
+    Normally the period of a data bit is between 2.05 and 2.75 milliseconds.
+    With this command the period of this bit is 2.9 milliseconds, this is
+    done by increasing the time the CEC bus is high.
+
+    Even though this bit period is longer than is valid it is undefined what
+    a receiver will do. It might just accept it, or it might time out and
+    return to Idle state. Unfortunately the CEC specification is silent about
+    this.
+
+    This command is ignored for 0 bits in bit positions 0 to 3. This is
+    because the receiver also looks for an Arbitration Lost condition in
+    those first four bits and it is undefined what will happen if it
+    sees a too-long 0 bit.
+
+``<op>[,<mode>] tx-short-start``
+    Make this start bit period shorter than allowed. Normally the period of
+    a start bit is between 4.3 and 4.7 milliseconds. With this command the
+    period of the start bit is 4.1 milliseconds, this is done by reducing
+    the time the CEC bus is high. This start bit period is less than is
+    allowed and the receiver should return to Idle state when this is detected.
+
+``<op>[,<mode>] tx-long-start``
+    Make this start bit period longer than is valid. Normally the period of
+    a start bit is between 4.3 and 4.7 milliseconds. With this command the
+    period of the start bit is 5 milliseconds, this is done by increasing
+    the time the CEC bus is high. This start bit period is more than is
+    valid and the receiver should return to Idle state when this is detected.
+
+    Even though this start bit period is longer than is valid it is undefined
+    what a receiver will do. It might just accept it, or it might time out and
+    return to Idle state. Unfortunately the CEC specification is silent about
+    this.
+
+``<op>[,<mode>] tx-last-bit <bit>``
+    Just stop transmitting after this bit.  If <op> specifies a specific CEC
+    opcode then the bit position must be at least 18, otherwise the opcode
+    hasn't been received yet. This command can be used to test how the receiver
+    reacts when a message just suddenly stops. It should time out and go back
+    to Idle state.
+
+``<op>[,<mode>] tx-low-drive <bit>``
+    Force a Low Drive condition at this bit position. If <op> specifies a
+    specific CEC opcode then the bit position must be at least 18, otherwise
+    the opcode hasn't been received yet. This can be used to test how the
+    receiver handles Low Drive conditions. Note that if this happens at bit
+    positions 0-3 the receiver can interpret this as an Arbitration Lost
+    condition. This is implementation dependent.
+
+Custom Pulses
+-------------
+
+``tx-custom-low-usecs <usecs>``
+    This defines the duration in microseconds that the custom pulse pulls
+    the CEC line low. The default is 1000 microseconds.
+
+``tx-custom-high-usecs <usecs>``
+    This defines the duration in microseconds that the custom pulse keeps the
+    CEC line high (unless another CEC adapter pulls it low in that time).
+    The default is 1000 microseconds. The total period of the custom pulse is
+    ``tx-custom-low-usecs + tx-custom-high-usecs``.
+
+``<op>[,<mode>] tx-custom-bit <bit>``
+    Send the custom bit instead of a regular data bit. The bit position cannot
+    be an Ack bit.  If <op> specifies a specific CEC opcode then the bit
+    position must be at least 18, otherwise the opcode hasn't been received yet.
+
+``<op>[,<mode>] tx-custom-start``
+    Send the custom bit instead of a regular start bit.
+
+``tx-custom-pulse``
+    Transmit a single custom pulse as soon as the CEC bus is idle.
diff --git a/Documentation/userspace-api/media/conf_nitpick.py b/Documentation/userspace-api/media/conf_nitpick.py
new file mode 100644
index 000000000000..d0c50d75f518
--- /dev/null
+++ b/Documentation/userspace-api/media/conf_nitpick.py
@@ -0,0 +1,111 @@
+# -*- coding: utf-8; mode: python -*-
+
+# SPDX-License-Identifier: GPL-2.0
+
+project = 'Linux Media Subsystem Documentation'
+
+# It is possible to run Sphinx in nickpick mode with:
+nitpicky = True
+
+# within nit-picking build, do not refer to any intersphinx object
+intersphinx_mapping = {}
+
+# In nickpick mode, it will complain about lots of missing references that
+#
+# 1) are just typedefs like: bool, __u32, etc;
+# 2) It will complain for things like: enum, NULL;
+# 3) It will complain for symbols that should be on different
+#    books (but currently aren't ported to ReST)
+#
+# The list below has a list of such symbols to be ignored in nitpick mode
+#
+nitpick_ignore = [
+    ("c:func", "clock_gettime"),
+    ("c:func", "close"),
+    ("c:func", "container_of"),
+    ("c:func", "copy_from_user"),
+    ("c:func", "copy_to_user"),
+    ("c:func", "determine_valid_ioctls"),
+    ("c:func", "ERR_PTR"),
+    ("c:func", "i2c_new_device"),
+    ("c:func", "ioctl"),
+    ("c:func", "IS_ERR"),
+    ("c:func", "KERNEL_VERSION"),
+    ("c:func", "mmap"),
+    ("c:func", "open"),
+    ("c:func", "pci_name"),
+    ("c:func", "poll"),
+    ("c:func", "PTR_ERR"),
+    ("c:func", "read"),
+    ("c:func", "release"),
+    ("c:func", "set"),
+    ("c:func", "struct fd_set"),
+    ("c:func", "struct pollfd"),
+    ("c:func", "usb_make_path"),
+    ("c:func", "wait_finish"),
+    ("c:func", "wait_prepare"),
+    ("c:func", "write"),
+
+    ("c:type", "atomic_t"),
+    ("c:type", "bool"),
+    ("c:type", "boolean"),
+    ("c:type", "buf_queue"),
+    ("c:type", "device"),
+    ("c:type", "device_driver"),
+    ("c:type", "device_node"),
+    ("c:type", "enum"),
+    ("c:type", "fd"),
+    ("c:type", "fd_set"),
+    ("c:type", "file"),
+    ("c:type", "i2c_adapter"),
+    ("c:type", "i2c_board_info"),
+    ("c:type", "i2c_client"),
+    ("c:type", "int16_t"),
+    ("c:type", "ktime_t"),
+    ("c:type", "led_classdev_flash"),
+    ("c:type", "list_head"),
+    ("c:type", "lock_class_key"),
+    ("c:type", "module"),
+    ("c:type", "mutex"),
+    ("c:type", "NULL"),
+    ("c:type", "off_t"),
+    ("c:type", "pci_dev"),
+    ("c:type", "pdvbdev"),
+    ("c:type", "poll_table"),
+    ("c:type", "platform_device"),
+    ("c:type", "pollfd"),
+    ("c:type", "poll_table_struct"),
+    ("c:type", "s32"),
+    ("c:type", "s64"),
+    ("c:type", "sd"),
+    ("c:type", "size_t"),
+    ("c:type", "spi_board_info"),
+    ("c:type", "spi_device"),
+    ("c:type", "spi_master"),
+    ("c:type", "ssize_t"),
+    ("c:type", "fb_fix_screeninfo"),
+    ("c:type", "pollfd"),
+    ("c:type", "timeval"),
+    ("c:type", "video_capability"),
+    ("c:type", "timeval"),
+    ("c:type", "__u16"),
+    ("c:type", "u16"),
+    ("c:type", "__u32"),
+    ("c:type", "u32"),
+    ("c:type", "__u64"),
+    ("c:type", "u64"),
+    ("c:type", "u8"),
+    ("c:type", "uint16_t"),
+    ("c:type", "uint32_t"),
+    ("c:type", "union"),
+    ("c:type", "__user"),
+    ("c:type", "usb_device"),
+    ("c:type", "usb_interface"),
+    ("c:type", "v4l2_std_id"),
+    ("c:type", "video_system_t"),
+    ("c:type", "vm_area_struct"),
+
+    # Opaque structures
+
+    ("c:type", "v4l2_m2m_dev"),
+]
diff --git a/Documentation/userspace-api/media/dmx.h.rst.exceptions b/Documentation/userspace-api/media/dmx.h.rst.exceptions
new file mode 100644
index 000000000000..afc14d384b83
--- /dev/null
+++ b/Documentation/userspace-api/media/dmx.h.rst.exceptions
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define _UAPI_DVBDMX_H_
+
+# Ignore limit constants
+ignore define DMX_FILTER_SIZE
+
+# dmx_pes_type_t enum symbols
+replace enum dmx_ts_pes :c:type:`dmx_pes_type`
+replace symbol DMX_PES_AUDIO0 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_VIDEO0 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_TELETEXT0 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_SUBTITLE0 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_PCR0 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_AUDIO1 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_VIDEO1 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_TELETEXT1 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_SUBTITLE1 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_PCR1 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_AUDIO2 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_VIDEO2 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_TELETEXT2 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_SUBTITLE2 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_PCR2 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_AUDIO3 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_VIDEO3 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_TELETEXT3 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_SUBTITLE3 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_PCR3 :c:type:`dmx_pes_type`
+replace symbol DMX_PES_OTHER :c:type:`dmx_pes_type`
+
+# Ignore obsolete symbols
+ignore define DMX_PES_AUDIO
+ignore define DMX_PES_VIDEO
+ignore define DMX_PES_TELETEXT
+ignore define DMX_PES_SUBTITLE
+ignore define DMX_PES_PCR
+
+# dmx_input_t symbols
+replace enum dmx_input :c:type:`dmx_input`
+replace symbol DMX_IN_FRONTEND :c:type:`dmx_input`
+replace symbol DMX_IN_DVR :c:type:`dmx_input`
+
+# Flags for struct dmx_sct_filter_params
+replace define DMX_CHECK_CRC :c:type:`dmx_sct_filter_params`
+replace define DMX_ONESHOT :c:type:`dmx_sct_filter_params`
+replace define DMX_IMMEDIATE_START :c:type:`dmx_sct_filter_params`
+
+# some typedefs should point to struct/enums
+replace typedef dmx_filter_t :c:type:`dmx_filter`
+replace typedef dmx_pes_type_t :c:type:`dmx_pes_type`
+replace typedef dmx_input_t :c:type:`dmx_input`
+
+replace symbol DMX_BUFFER_FLAG_HAD_CRC32_DISCARD :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_TEI :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_PKT_COUNTER_MISMATCH :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_INDICATOR :c:type:`dmx_buffer_flags`
+
+replace symbol DMX_OUT_DECODER :c:type:`dmx_output`
+replace symbol DMX_OUT_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TS_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TSDEMUX_TAP :c:type:`dmx_output`
+
+replace ioctl DMX_DQBUF dmx_qbuf
diff --git a/Documentation/userspace-api/media/drivers/cx2341x-uapi.rst b/Documentation/userspace-api/media/drivers/cx2341x-uapi.rst
new file mode 100644
index 000000000000..8a7977af79d5
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/cx2341x-uapi.rst
@@ -0,0 +1,179 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The cx2341x driver
+==================
+
+Non-compressed file format
+--------------------------
+
+The cx23416 can produce (and the cx23415 can also read) raw YUV output. The
+format of a YUV frame is specific to this chip and is called HM12. 'HM' stands
+for 'Hauppauge Macroblock', which is a misnomer as 'Conexant Macroblock' would
+be more accurate.
+
+The format is YUV 4:2:0 which uses 1 Y byte per pixel and 1 U and V byte per
+four pixels.
+
+The data is encoded as two macroblock planes, the first containing the Y
+values, the second containing UV macroblocks.
+
+The Y plane is divided into blocks of 16x16 pixels from left to right
+and from top to bottom. Each block is transmitted in turn, line-by-line.
+
+So the first 16 bytes are the first line of the top-left block, the
+second 16 bytes are the second line of the top-left block, etc. After
+transmitting this block the first line of the block on the right to the
+first block is transmitted, etc.
+
+The UV plane is divided into blocks of 16x8 UV values going from left
+to right, top to bottom. Each block is transmitted in turn, line-by-line.
+
+So the first 16 bytes are the first line of the top-left block and
+contain 8 UV value pairs (16 bytes in total). The second 16 bytes are the
+second line of 8 UV pairs of the top-left block, etc. After transmitting
+this block the first line of the block on the right to the first block is
+transmitted, etc.
+
+The code below is given as an example on how to convert HM12 to separate
+Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels.
+
+The width of a frame is always 720 pixels, regardless of the actual specified
+width.
+
+If the height is not a multiple of 32 lines, then the captured video is
+missing macroblocks at the end and is unusable. So the height must be a
+multiple of 32.
+
+Raw format c example
+~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+	#include <stdio.h>
+	#include <stdlib.h>
+	#include <string.h>
+
+	static unsigned char frame[576*720*3/2];
+	static unsigned char framey[576*720];
+	static unsigned char frameu[576*720 / 4];
+	static unsigned char framev[576*720 / 4];
+
+	static void de_macro_y(unsigned char* dst, unsigned char *src, int dstride, int w, int h)
+	{
+	unsigned int y, x, i;
+
+	// descramble Y plane
+	// dstride = 720 = w
+	// The Y plane is divided into blocks of 16x16 pixels
+	// Each block in transmitted in turn, line-by-line.
+	for (y = 0; y < h; y += 16) {
+		for (x = 0; x < w; x += 16) {
+		for (i = 0; i < 16; i++) {
+			memcpy(dst + x + (y + i) * dstride, src, 16);
+			src += 16;
+		}
+		}
+	}
+	}
+
+	static void de_macro_uv(unsigned char *dstu, unsigned char *dstv, unsigned char *src, int dstride, int w, int h)
+	{
+	unsigned int y, x, i;
+
+	// descramble U/V plane
+	// dstride = 720 / 2 = w
+	// The U/V values are interlaced (UVUV...).
+	// Again, the UV plane is divided into blocks of 16x16 UV values.
+	// Each block in transmitted in turn, line-by-line.
+	for (y = 0; y < h; y += 16) {
+		for (x = 0; x < w; x += 8) {
+		for (i = 0; i < 16; i++) {
+			int idx = x + (y + i) * dstride;
+
+			dstu[idx+0] = src[0];  dstv[idx+0] = src[1];
+			dstu[idx+1] = src[2];  dstv[idx+1] = src[3];
+			dstu[idx+2] = src[4];  dstv[idx+2] = src[5];
+			dstu[idx+3] = src[6];  dstv[idx+3] = src[7];
+			dstu[idx+4] = src[8];  dstv[idx+4] = src[9];
+			dstu[idx+5] = src[10]; dstv[idx+5] = src[11];
+			dstu[idx+6] = src[12]; dstv[idx+6] = src[13];
+			dstu[idx+7] = src[14]; dstv[idx+7] = src[15];
+			src += 16;
+		}
+		}
+	}
+	}
+
+	/*************************************************************************/
+	int main(int argc, char **argv)
+	{
+	FILE *fin;
+	int i;
+
+	if (argc == 1) fin = stdin;
+	else fin = fopen(argv[1], "r");
+
+	if (fin == NULL) {
+		fprintf(stderr, "cannot open input\n");
+		exit(-1);
+	}
+	while (fread(frame, sizeof(frame), 1, fin) == 1) {
+		de_macro_y(framey, frame, 720, 720, 576);
+		de_macro_uv(frameu, framev, frame + 720 * 576, 720 / 2, 720 / 2, 576 / 2);
+		fwrite(framey, sizeof(framey), 1, stdout);
+		fwrite(framev, sizeof(framev), 1, stdout);
+		fwrite(frameu, sizeof(frameu), 1, stdout);
+	}
+	fclose(fin);
+	return 0;
+	}
+
+
+Format of embedded V4L2_MPEG_STREAM_VBI_FMT_IVTV VBI data
+---------------------------------------------------------
+
+Author: Hans Verkuil <hverkuil@xs4all.nl>
+
+
+This section describes the V4L2_MPEG_STREAM_VBI_FMT_IVTV format of the VBI data
+embedded in an MPEG-2 program stream. This format is in part dictated by some
+hardware limitations of the ivtv driver (the driver for the Conexant cx23415/6
+chips), in particular a maximum size for the VBI data. Anything longer is cut
+off when the MPEG stream is played back through the cx23415.
+
+The advantage of this format is it is very compact and that all VBI data for
+all lines can be stored while still fitting within the maximum allowed size.
+
+The stream ID of the VBI data is 0xBD. The maximum size of the embedded data is
+4 + 43 * 36, which is 4 bytes for a header and 2 * 18 VBI lines with a 1 byte
+header and a 42 bytes payload each. Anything beyond this limit is cut off by
+the cx23415/6 firmware. Besides the data for the VBI lines we also need 36 bits
+for a bitmask determining which lines are captured and 4 bytes for a magic cookie,
+signifying that this data package contains V4L2_MPEG_STREAM_VBI_FMT_IVTV VBI data.
+If all lines are used, then there is no longer room for the bitmask. To solve this
+two different magic numbers were introduced:
+
+'itv0': After this magic number two unsigned longs follow. Bits 0-17 of the first
+unsigned long denote which lines of the first field are captured. Bits 18-31 of
+the first unsigned long and bits 0-3 of the second unsigned long are used for the
+second field.
+
+'ITV0': This magic number assumes all VBI lines are captured, i.e. it implicitly
+implies that the bitmasks are 0xffffffff and 0xf.
+
+After these magic cookies (and the 8 byte bitmask in case of cookie 'itv0') the
+captured VBI lines start:
+
+For each line the least significant 4 bits of the first byte contain the data type.
+Possible values are shown in the table below. The payload is in the following 42
+bytes.
+
+Here is the list of possible data types:
+
+.. code-block:: c
+
+	#define IVTV_SLICED_TYPE_TELETEXT       0x1     // Teletext (uses lines 6-22 for PAL)
+	#define IVTV_SLICED_TYPE_CC             0x4     // Closed Captions (line 21 NTSC)
+	#define IVTV_SLICED_TYPE_WSS            0x5     // Wide Screen Signal (line 23 PAL)
+	#define IVTV_SLICED_TYPE_VPS            0x7     // Video Programming System (PAL) (line 16)
+
diff --git a/Documentation/userspace-api/media/drivers/imx-uapi.rst b/Documentation/userspace-api/media/drivers/imx-uapi.rst
new file mode 100644
index 000000000000..8d47712dea9f
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/imx-uapi.rst
@@ -0,0 +1,125 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+i.MX Video Capture Driver
+=========================
+
+Events
+======
+
+.. _imx_api_ipuX_csiY:
+
+ipuX_csiY
+---------
+
+This subdev can generate the following event when enabling the second
+IDMAC source pad:
+
+- V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR
+
+The user application can subscribe to this event from the ipuX_csiY
+subdev node. This event is generated by the Frame Interval Monitor
+(see below for more on the FIM).
+
+Controls
+========
+
+.. _imx_api_FIM:
+
+Frame Interval Monitor in ipuX_csiY
+-----------------------------------
+
+The adv718x decoders can occasionally send corrupt fields during
+NTSC/PAL signal re-sync (too little or too many video lines). When
+this happens, the IPU triggers a mechanism to re-establish vertical
+sync by adding 1 dummy line every frame, which causes a rolling effect
+from image to image, and can last a long time before a stable image is
+recovered. Or sometimes the mechanism doesn't work at all, causing a
+permanent split image (one frame contains lines from two consecutive
+captured images).
+
+From experiment it was found that during image rolling, the frame
+intervals (elapsed time between two EOF's) drop below the nominal
+value for the current standard, by about one frame time (60 usec),
+and remain at that value until rolling stops.
+
+While the reason for this observation isn't known (the IPU dummy
+line mechanism should show an increase in the intervals by 1 line
+time every frame, not a fixed value), we can use it to detect the
+corrupt fields using a frame interval monitor. If the FIM detects a
+bad frame interval, the ipuX_csiY subdev will send the event
+V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR. Userland can register with
+the FIM event notification on the ipuX_csiY subdev device node.
+Userland can issue a streaming restart when this event is received
+to correct the rolling/split image.
+
+The ipuX_csiY subdev includes custom controls to tweak some dials for
+FIM. If one of these controls is changed during streaming, the FIM will
+be reset and will continue at the new settings.
+
+- V4L2_CID_IMX_FIM_ENABLE
+
+Enable/disable the FIM.
+
+- V4L2_CID_IMX_FIM_NUM
+
+How many frame interval measurements to average before comparing against
+the nominal frame interval reported by the sensor. This can reduce noise
+caused by interrupt latency.
+
+- V4L2_CID_IMX_FIM_TOLERANCE_MIN
+
+If the averaged intervals fall outside nominal by this amount, in
+microseconds, the V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR event is sent.
+
+- V4L2_CID_IMX_FIM_TOLERANCE_MAX
+
+If any intervals are higher than this value, those samples are
+discarded and do not enter into the average. This can be used to
+discard really high interval errors that might be due to interrupt
+latency from high system load.
+
+- V4L2_CID_IMX_FIM_NUM_SKIP
+
+How many frames to skip after a FIM reset or stream restart before
+FIM begins to average intervals.
+
+- V4L2_CID_IMX_FIM_ICAP_CHANNEL / V4L2_CID_IMX_FIM_ICAP_EDGE
+
+These controls will configure an input capture channel as the method
+for measuring frame intervals. This is superior to the default method
+of measuring frame intervals via EOF interrupt, since it is not subject
+to uncertainty errors introduced by interrupt latency.
+
+Input capture requires hardware support. A VSYNC signal must be routed
+to one of the i.MX6 input capture channel pads.
+
+V4L2_CID_IMX_FIM_ICAP_CHANNEL configures which i.MX6 input capture
+channel to use. This must be 0 or 1.
+
+V4L2_CID_IMX_FIM_ICAP_EDGE configures which signal edge will trigger
+input capture events. By default the input capture method is disabled
+with a value of IRQ_TYPE_NONE. Set this control to IRQ_TYPE_EDGE_RISING,
+IRQ_TYPE_EDGE_FALLING, or IRQ_TYPE_EDGE_BOTH to enable input capture,
+triggered on the given signal edge(s).
+
+When input capture is disabled, frame intervals will be measured via
+EOF interrupt.
+
+
+File list
+---------
+
+drivers/staging/media/imx/
+include/media/imx.h
+include/linux/imx-media.h
+
+
+Authors
+-------
+
+- Steve Longerbeam <steve_longerbeam@mentor.com>
+- Philipp Zabel <kernel@pengutronix.de>
+- Russell King <linux@armlinux.org.uk>
+
+Copyright (C) 2012-2017 Mentor Graphics Inc.
diff --git a/Documentation/userspace-api/media/drivers/index.rst b/Documentation/userspace-api/media/drivers/index.rst
new file mode 100644
index 000000000000..05a82f8c0c99
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/index.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+.. _v4l-drivers_uapi:
+
+################################################
+Video4Linux (V4L)  driver-specific documentation
+################################################
+
+**Copyright** |copy| 1999-2016 : LinuxTV Developers
+
+This documentation is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the Free
+Software Foundation version 2 of the License.
+
+This program is distributed in the hope that it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+more details.
+
+For more details see the file COPYING in the source distribution of Linux.
+
+.. only:: html
+
+   .. class:: toc-title
+
+        Table of Contents
+
+.. toctree::
+	:maxdepth: 5
+	:numbered:
+
+	cx2341x-uapi
+	imx-uapi
+	max2175
+	meye-uapi
+	omap3isp-uapi
+	uvcvideo
diff --git a/Documentation/userspace-api/media/drivers/max2175.rst b/Documentation/userspace-api/media/drivers/max2175.rst
new file mode 100644
index 000000000000..35d3c4b41fc7
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/max2175.rst
@@ -0,0 +1,64 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Maxim Integrated MAX2175 RF to bits tuner driver
+================================================
+
+The MAX2175 driver implements the following driver-specific controls:
+
+``V4L2_CID_MAX2175_I2S_ENABLE``
+-------------------------------
+    Enable/Disable I2S output of the tuner. This is a private control
+    that can be accessed only using the subdev interface.
+    Refer to Documentation/driver-api/media/v4l2-controls.rst for more details.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 4
+
+    * - ``(0)``
+      - I2S output is disabled.
+    * - ``(1)``
+      - I2S output is enabled.
+
+``V4L2_CID_MAX2175_HSLS``
+-------------------------
+    The high-side/low-side (HSLS) control of the tuner for a given band.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 4
+
+    * - ``(0)``
+      - The LO frequency position is below the desired frequency.
+    * - ``(1)``
+      - The LO frequency position is above the desired frequency.
+
+``V4L2_CID_MAX2175_RX_MODE (menu)``
+-----------------------------------
+    The Rx mode controls a number of preset parameters of the tuner like
+    sample clock (sck), sampling rate etc. These multiple settings are
+    provided under one single label called Rx mode in the datasheet. The
+    list below shows the supported modes with a brief description.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 4
+
+    * - ``"Europe modes"``
+    * - ``"FM 1.2" (0)``
+      - This configures FM band with a sample rate of 0.512 million
+        samples/sec with a 10.24 MHz sck.
+    * - ``"DAB 1.2" (1)``
+      - This configures VHF band with a sample rate of 2.048 million
+        samples/sec with a 32.768 MHz sck.
+
+    * - ``"North America modes"``
+    * - ``"FM 1.0" (0)``
+      - This configures FM band with a sample rate of 0.7441875 million
+        samples/sec with a 14.88375 MHz sck.
+    * - ``"DAB 1.2" (1)``
+      - This configures FM band with a sample rate of 0.372 million
+        samples/sec with a 7.441875 MHz sck.
diff --git a/Documentation/userspace-api/media/drivers/meye-uapi.rst b/Documentation/userspace-api/media/drivers/meye-uapi.rst
new file mode 100644
index 000000000000..66b1c142f920
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/meye-uapi.rst
@@ -0,0 +1,53 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+Vaio Picturebook Motion Eye Camera Driver
+=========================================
+
+Copyright |copy| 2001-2004 Stelian Pop <stelian@popies.net>
+
+Copyright |copy| 2001-2002 Alcôve <www.alcove.com>
+
+Copyright |copy| 2000 Andrew Tridgell <tridge@samba.org>
+
+Private API
+-----------
+
+The driver supports frame grabbing with the video4linux API,
+so all video4linux tools (like xawtv) should work with this driver.
+
+Besides the video4linux interface, the driver has a private interface
+for accessing the Motion Eye extended parameters (camera sharpness,
+agc, video framerate), the snapshot and the MJPEG capture facilities.
+
+This interface consists of several ioctls (prototypes and structures
+can be found in include/linux/meye.h):
+
+MEYEIOC_G_PARAMS and MEYEIOC_S_PARAMS
+	Get and set the extended parameters of the motion eye camera.
+	The user should always query the current parameters with
+	MEYEIOC_G_PARAMS, change what he likes and then issue the
+	MEYEIOC_S_PARAMS call (checking for -EINVAL). The extended
+	parameters are described by the meye_params structure.
+
+
+MEYEIOC_QBUF_CAPT
+	Queue a buffer for capture (the buffers must have been
+	obtained with a VIDIOCGMBUF call and mmap'ed by the
+	application). The argument to MEYEIOC_QBUF_CAPT is the
+	buffer number to queue (or -1 to end capture). The first
+	call to MEYEIOC_QBUF_CAPT starts the streaming capture.
+
+MEYEIOC_SYNC
+	Takes as an argument the buffer number you want to sync.
+	This ioctl blocks until the buffer is filled and ready
+	for the application to use. It returns the buffer size.
+
+MEYEIOC_STILLCAPT and MEYEIOC_STILLJCAPT
+	Takes a snapshot in an uncompressed or compressed jpeg format.
+	This ioctl blocks until the snapshot is done and returns (for
+	jpeg snapshot) the size of the image. The image data is
+	available from the first mmap'ed buffer.
+
+Look at the 'motioneye' application code for an actual example.
diff --git a/Documentation/userspace-api/media/drivers/omap3isp-uapi.rst b/Documentation/userspace-api/media/drivers/omap3isp-uapi.rst
new file mode 100644
index 000000000000..5f966a874a3c
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/omap3isp-uapi.rst
@@ -0,0 +1,208 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+OMAP 3 Image Signal Processor (ISP) driver
+==========================================
+
+Copyright |copy| 2010 Nokia Corporation
+
+Copyright |copy| 2009 Texas Instruments, Inc.
+
+Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
+Sakari Ailus <sakari.ailus@iki.fi>, David Cohen <dacohen@gmail.com>
+
+
+Events
+------
+
+The OMAP 3 ISP driver does support the V4L2 event interface on CCDC and
+statistics (AEWB, AF and histogram) subdevs.
+
+The CCDC subdev produces V4L2_EVENT_FRAME_SYNC type event on HS_VS
+interrupt which is used to signal frame start. Earlier version of this
+driver used V4L2_EVENT_OMAP3ISP_HS_VS for this purpose. The event is
+triggered exactly when the reception of the first line of the frame starts
+in the CCDC module. The event can be subscribed on the CCDC subdev.
+
+(When using parallel interface one must pay account to correct configuration
+of the VS signal polarity. This is automatically correct when using the serial
+receivers.)
+
+Each of the statistics subdevs is able to produce events. An event is
+generated whenever a statistics buffer can be dequeued by a user space
+application using the VIDIOC_OMAP3ISP_STAT_REQ IOCTL. The events available
+are:
+
+- V4L2_EVENT_OMAP3ISP_AEWB
+- V4L2_EVENT_OMAP3ISP_AF
+- V4L2_EVENT_OMAP3ISP_HIST
+
+The type of the event data is struct omap3isp_stat_event_status for these
+ioctls. If there is an error calculating the statistics, there will be an
+event as usual, but no related statistics buffer. In this case
+omap3isp_stat_event_status.buf_err is set to non-zero.
+
+
+Private IOCTLs
+--------------
+
+The OMAP 3 ISP driver supports standard V4L2 IOCTLs and controls where
+possible and practical. Much of the functions provided by the ISP, however,
+does not fall under the standard IOCTLs --- gamma tables and configuration of
+statistics collection are examples of such.
+
+In general, there is a private ioctl for configuring each of the blocks
+containing hardware-dependent functions.
+
+The following private IOCTLs are supported:
+
+- VIDIOC_OMAP3ISP_CCDC_CFG
+- VIDIOC_OMAP3ISP_PRV_CFG
+- VIDIOC_OMAP3ISP_AEWB_CFG
+- VIDIOC_OMAP3ISP_HIST_CFG
+- VIDIOC_OMAP3ISP_AF_CFG
+- VIDIOC_OMAP3ISP_STAT_REQ
+- VIDIOC_OMAP3ISP_STAT_EN
+
+The parameter structures used by these ioctls are described in
+include/linux/omap3isp.h. The detailed functions of the ISP itself related to
+a given ISP block is described in the Technical Reference Manuals (TRMs) ---
+see the end of the document for those.
+
+While it is possible to use the ISP driver without any use of these private
+IOCTLs it is not possible to obtain optimal image quality this way. The AEWB,
+AF and histogram modules cannot be used without configuring them using the
+appropriate private IOCTLs.
+
+
+CCDC and preview block IOCTLs
+-----------------------------
+
+The VIDIOC_OMAP3ISP_CCDC_CFG and VIDIOC_OMAP3ISP_PRV_CFG IOCTLs are used to
+configure, enable and disable functions in the CCDC and preview blocks,
+respectively. Both IOCTLs control several functions in the blocks they
+control. VIDIOC_OMAP3ISP_CCDC_CFG IOCTL accepts a pointer to struct
+omap3isp_ccdc_update_config as its argument. Similarly VIDIOC_OMAP3ISP_PRV_CFG
+accepts a pointer to struct omap3isp_prev_update_config. The definition of
+both structures is available in [#]_.
+
+The update field in the structures tells whether to update the configuration
+for the specific function and the flag tells whether to enable or disable the
+function.
+
+The update and flag bit masks accept the following values. Each separate
+functions in the CCDC and preview blocks is associated with a flag (either
+disable or enable; part of the flag field in the structure) and a pointer to
+configuration data for the function.
+
+Valid values for the update and flag fields are listed here for
+VIDIOC_OMAP3ISP_CCDC_CFG. Values may be or'ed to configure more than one
+function in the same IOCTL call.
+
+- OMAP3ISP_CCDC_ALAW
+- OMAP3ISP_CCDC_LPF
+- OMAP3ISP_CCDC_BLCLAMP
+- OMAP3ISP_CCDC_BCOMP
+- OMAP3ISP_CCDC_FPC
+- OMAP3ISP_CCDC_CULL
+- OMAP3ISP_CCDC_CONFIG_LSC
+- OMAP3ISP_CCDC_TBL_LSC
+
+The corresponding values for the VIDIOC_OMAP3ISP_PRV_CFG are here:
+
+- OMAP3ISP_PREV_LUMAENH
+- OMAP3ISP_PREV_INVALAW
+- OMAP3ISP_PREV_HRZ_MED
+- OMAP3ISP_PREV_CFA
+- OMAP3ISP_PREV_CHROMA_SUPP
+- OMAP3ISP_PREV_WB
+- OMAP3ISP_PREV_BLKADJ
+- OMAP3ISP_PREV_RGB2RGB
+- OMAP3ISP_PREV_COLOR_CONV
+- OMAP3ISP_PREV_YC_LIMIT
+- OMAP3ISP_PREV_DEFECT_COR
+- OMAP3ISP_PREV_GAMMABYPASS
+- OMAP3ISP_PREV_DRK_FRM_CAPTURE
+- OMAP3ISP_PREV_DRK_FRM_SUBTRACT
+- OMAP3ISP_PREV_LENS_SHADING
+- OMAP3ISP_PREV_NF
+- OMAP3ISP_PREV_GAMMA
+
+The associated configuration pointer for the function may not be NULL when
+enabling the function. When disabling a function the configuration pointer is
+ignored.
+
+
+Statistic blocks IOCTLs
+-----------------------
+
+The statistics subdevs do offer more dynamic configuration options than the
+other subdevs. They can be enabled, disable and reconfigured when the pipeline
+is in streaming state.
+
+The statistics blocks always get the input image data from the CCDC (as the
+histogram memory read isn't implemented). The statistics are dequeueable by
+the user from the statistics subdev nodes using private IOCTLs.
+
+The private IOCTLs offered by the AEWB, AF and histogram subdevs are heavily
+reflected by the register level interface offered by the ISP hardware. There
+are aspects that are purely related to the driver implementation and these are
+discussed next.
+
+VIDIOC_OMAP3ISP_STAT_EN
+-----------------------
+
+This private IOCTL enables/disables a statistic module. If this request is
+done before streaming, it will take effect as soon as the pipeline starts to
+stream.  If the pipeline is already streaming, it will take effect as soon as
+the CCDC becomes idle.
+
+VIDIOC_OMAP3ISP_AEWB_CFG, VIDIOC_OMAP3ISP_HIST_CFG and VIDIOC_OMAP3ISP_AF_CFG
+-----------------------------------------------------------------------------
+
+Those IOCTLs are used to configure the modules. They require user applications
+to have an in-depth knowledge of the hardware. Most of the fields explanation
+can be found on OMAP's TRMs. The two following fields common to all the above
+configure private IOCTLs require explanation for better understanding as they
+are not part of the TRM.
+
+omap3isp_[h3a_af/h3a_aewb/hist]\_config.buf_size:
+
+The modules handle their buffers internally. The necessary buffer size for the
+module's data output depends on the requested configuration. Although the
+driver supports reconfiguration while streaming, it does not support a
+reconfiguration which requires bigger buffer size than what is already
+internally allocated if the module is enabled. It will return -EBUSY on this
+case. In order to avoid such condition, either disable/reconfigure/enable the
+module or request the necessary buffer size during the first configuration
+while the module is disabled.
+
+The internal buffer size allocation considers the requested configuration's
+minimum buffer size and the value set on buf_size field. If buf_size field is
+out of [minimum, maximum] buffer size range, it's clamped to fit in there.
+The driver then selects the biggest value. The corrected buf_size value is
+written back to user application.
+
+omap3isp_[h3a_af/h3a_aewb/hist]\_config.config_counter:
+
+As the configuration doesn't take effect synchronously to the request, the
+driver must provide a way to track this information to provide more accurate
+data. After a configuration is requested, the config_counter returned to user
+space application will be an unique value associated to that request. When
+user application receives an event for buffer availability or when a new
+buffer is requested, this config_counter is used to match a buffer data and a
+configuration.
+
+VIDIOC_OMAP3ISP_STAT_REQ
+------------------------
+
+Send to user space the oldest data available in the internal buffer queue and
+discards such buffer afterwards. The field omap3isp_stat_data.frame_number
+matches with the video buffer's field_count.
+
+
+References
+----------
+
+.. [#] include/linux/omap3isp.h
diff --git a/Documentation/userspace-api/media/drivers/uvcvideo.rst b/Documentation/userspace-api/media/drivers/uvcvideo.rst
new file mode 100644
index 000000000000..e5fd8fad333c
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/uvcvideo.rst
@@ -0,0 +1,257 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Linux USB Video Class (UVC) driver
+======================================
+
+This file documents some driver-specific aspects of the UVC driver, such as
+driver-specific ioctls and implementation notes.
+
+Questions and remarks can be sent to the Linux UVC development mailing list at
+linux-uvc-devel@lists.berlios.de.
+
+
+Extension Unit (XU) support
+---------------------------
+
+Introduction
+~~~~~~~~~~~~
+
+The UVC specification allows for vendor-specific extensions through extension
+units (XUs). The Linux UVC driver supports extension unit controls (XU controls)
+through two separate mechanisms:
+
+  - through mappings of XU controls to V4L2 controls
+  - through a driver-specific ioctl interface
+
+The first one allows generic V4L2 applications to use XU controls by mapping
+certain XU controls onto V4L2 controls, which then show up during ordinary
+control enumeration.
+
+The second mechanism requires uvcvideo-specific knowledge for the application to
+access XU controls but exposes the entire UVC XU concept to user space for
+maximum flexibility.
+
+Both mechanisms complement each other and are described in more detail below.
+
+
+Control mappings
+~~~~~~~~~~~~~~~~
+
+The UVC driver provides an API for user space applications to define so-called
+control mappings at runtime. These allow for individual XU controls or byte
+ranges thereof to be mapped to new V4L2 controls. Such controls appear and
+function exactly like normal V4L2 controls (i.e. the stock controls, such as
+brightness, contrast, etc.). However, reading or writing of such a V4L2 controls
+triggers a read or write of the associated XU control.
+
+The ioctl used to create these control mappings is called UVCIOC_CTRL_MAP.
+Previous driver versions (before 0.2.0) required another ioctl to be used
+beforehand (UVCIOC_CTRL_ADD) to pass XU control information to the UVC driver.
+This is no longer necessary as newer uvcvideo versions query the information
+directly from the device.
+
+For details on the UVCIOC_CTRL_MAP ioctl please refer to the section titled
+"IOCTL reference" below.
+
+
+3. Driver specific XU control interface
+
+For applications that need to access XU controls directly, e.g. for testing
+purposes, firmware upload, or accessing binary controls, a second mechanism to
+access XU controls is provided in the form of a driver-specific ioctl, namely
+UVCIOC_CTRL_QUERY.
+
+A call to this ioctl allows applications to send queries to the UVC driver that
+directly map to the low-level UVC control requests.
+
+In order to make such a request the UVC unit ID of the control's extension unit
+and the control selector need to be known. This information either needs to be
+hardcoded in the application or queried using other ways such as by parsing the
+UVC descriptor or, if available, using the media controller API to enumerate a
+device's entities.
+
+Unless the control size is already known it is necessary to first make a
+UVC_GET_LEN requests in order to be able to allocate a sufficiently large buffer
+and set the buffer size to the correct value. Similarly, to find out whether
+UVC_GET_CUR or UVC_SET_CUR are valid requests for a given control, a
+UVC_GET_INFO request should be made. The bits 0 (GET supported) and 1 (SET
+supported) of the resulting byte indicate which requests are valid.
+
+With the addition of the UVCIOC_CTRL_QUERY ioctl the UVCIOC_CTRL_GET and
+UVCIOC_CTRL_SET ioctls have become obsolete since their functionality is a
+subset of the former ioctl. For the time being they are still supported but
+application developers are encouraged to use UVCIOC_CTRL_QUERY instead.
+
+For details on the UVCIOC_CTRL_QUERY ioctl please refer to the section titled
+"IOCTL reference" below.
+
+
+Security
+~~~~~~~~
+
+The API doesn't currently provide a fine-grained access control facility. The
+UVCIOC_CTRL_ADD and UVCIOC_CTRL_MAP ioctls require super user permissions.
+
+Suggestions on how to improve this are welcome.
+
+
+Debugging
+~~~~~~~~~
+
+In order to debug problems related to XU controls or controls in general it is
+recommended to enable the UVC_TRACE_CONTROL bit in the module parameter 'trace'.
+This causes extra output to be written into the system log.
+
+
+IOCTL reference
+~~~~~~~~~~~~~~~
+
+UVCIOC_CTRL_MAP - Map a UVC control to a V4L2 control
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Argument: struct uvc_xu_control_mapping
+
+**Description**:
+
+	This ioctl creates a mapping between a UVC control or part of a UVC
+	control and a V4L2 control. Once mappings are defined, userspace
+	applications can access vendor-defined UVC control through the V4L2
+	control API.
+
+	To create a mapping, applications fill the uvc_xu_control_mapping
+	structure with information about an existing UVC control defined with
+	UVCIOC_CTRL_ADD and a new V4L2 control.
+
+	A UVC control can be mapped to several V4L2 controls. For instance,
+	a UVC pan/tilt control could be mapped to separate pan and tilt V4L2
+	controls. The UVC control is divided into non overlapping fields using
+	the 'size' and 'offset' fields and are then independently mapped to
+	V4L2 control.
+
+	For signed integer V4L2 controls the data_type field should be set to
+	UVC_CTRL_DATA_TYPE_SIGNED. Other values are currently ignored.
+
+**Return value**:
+
+	On success 0 is returned. On error -1 is returned and errno is set
+	appropriately.
+
+	ENOMEM
+		Not enough memory to perform the operation.
+	EPERM
+		Insufficient privileges (super user privileges are required).
+	EINVAL
+		No such UVC control.
+	EOVERFLOW
+		The requested offset and size would overflow the UVC control.
+	EEXIST
+		Mapping already exists.
+
+**Data types**:
+
+.. code-block:: none
+
+	* struct uvc_xu_control_mapping
+
+	__u32	id		V4L2 control identifier
+	__u8	name[32]	V4L2 control name
+	__u8	entity[16]	UVC extension unit GUID
+	__u8	selector	UVC control selector
+	__u8	size		V4L2 control size (in bits)
+	__u8	offset		V4L2 control offset (in bits)
+	enum v4l2_ctrl_type
+		v4l2_type	V4L2 control type
+	enum uvc_control_data_type
+		data_type	UVC control data type
+	struct uvc_menu_info
+		*menu_info	Array of menu entries (for menu controls only)
+	__u32	menu_count	Number of menu entries (for menu controls only)
+
+	* struct uvc_menu_info
+
+	__u32	value		Menu entry value used by the device
+	__u8	name[32]	Menu entry name
+
+
+	* enum uvc_control_data_type
+
+	UVC_CTRL_DATA_TYPE_RAW		Raw control (byte array)
+	UVC_CTRL_DATA_TYPE_SIGNED	Signed integer
+	UVC_CTRL_DATA_TYPE_UNSIGNED	Unsigned integer
+	UVC_CTRL_DATA_TYPE_BOOLEAN	Boolean
+	UVC_CTRL_DATA_TYPE_ENUM		Enumeration
+	UVC_CTRL_DATA_TYPE_BITMASK	Bitmask
+
+
+UVCIOC_CTRL_QUERY - Query a UVC XU control
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Argument: struct uvc_xu_control_query
+
+**Description**:
+
+	This ioctl queries a UVC XU control identified by its extension unit ID
+	and control selector.
+
+	There are a number of different queries available that closely
+	correspond to the low-level control requests described in the UVC
+	specification. These requests are:
+
+	UVC_GET_CUR
+		Obtain the current value of the control.
+	UVC_GET_MIN
+		Obtain the minimum value of the control.
+	UVC_GET_MAX
+		Obtain the maximum value of the control.
+	UVC_GET_DEF
+		Obtain the default value of the control.
+	UVC_GET_RES
+		Query the resolution of the control, i.e. the step size of the
+		allowed control values.
+	UVC_GET_LEN
+		Query the size of the control in bytes.
+	UVC_GET_INFO
+		Query the control information bitmap, which indicates whether
+		get/set requests are supported.
+	UVC_SET_CUR
+		Update the value of the control.
+
+	Applications must set the 'size' field to the correct length for the
+	control. Exceptions are the UVC_GET_LEN and UVC_GET_INFO queries, for
+	which the size must be set to 2 and 1, respectively. The 'data' field
+	must point to a valid writable buffer big enough to hold the indicated
+	number of data bytes.
+
+	Data is copied directly from the device without any driver-side
+	processing. Applications are responsible for data buffer formatting,
+	including little-endian/big-endian conversion. This is particularly
+	important for the result of the UVC_GET_LEN requests, which is always
+	returned as a little-endian 16-bit integer by the device.
+
+**Return value**:
+
+	On success 0 is returned. On error -1 is returned and errno is set
+	appropriately.
+
+	ENOENT
+		The device does not support the given control or the specified
+		extension unit could not be found.
+	ENOBUFS
+		The specified buffer size is incorrect (too big or too small).
+	EINVAL
+		An invalid request code was passed.
+	EBADRQC
+		The given request is not supported by the given control.
+	EFAULT
+		The data pointer references an inaccessible memory area.
+
+**Data types**:
+
+.. code-block:: none
+
+	* struct uvc_xu_control_query
+
+	__u8	unit		Extension unit ID
+	__u8	selector	Control selector
+	__u8	query		Request code to send to the device
+	__u16	size		Control data size (in bytes)
+	__u8	*data		Control value
diff --git a/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst b/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst
new file mode 100644
index 000000000000..6841233f3fee
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst
@@ -0,0 +1,66 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_BILINGUAL_CHANNEL_SELECT:
+
+==============================
+AUDIO_BILINGUAL_CHANNEL_SELECT
+==============================
+
+Name
+----
+
+AUDIO_BILINGUAL_CHANNEL_SELECT
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, AUDIO_BILINGUAL_CHANNEL_SELECT, struct *audio_channel_select)
+    :name: AUDIO_BILINGUAL_CHANNEL_SELECT
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  audio_channel_select_t ch
+
+       -  Select the output format of the audio (mono left/right, stereo).
+
+
+Description
+-----------
+
+This ioctl is obsolete. Do not use in new drivers. It has been replaced
+by the V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` control
+for MPEG decoders controlled through V4L2.
+
+This ioctl call asks the Audio Device to select the requested channel
+for bilingual streams if possible.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-channel-select.rst b/Documentation/userspace-api/media/dvb/audio-channel-select.rst
new file mode 100644
index 000000000000..18e880e7eab4
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-channel-select.rst
@@ -0,0 +1,66 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_CHANNEL_SELECT:
+
+====================
+AUDIO_CHANNEL_SELECT
+====================
+
+Name
+----
+
+AUDIO_CHANNEL_SELECT
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, AUDIO_CHANNEL_SELECT, struct *audio_channel_select)
+    :name: AUDIO_CHANNEL_SELECT
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  audio_channel_select_t ch
+
+       -  Select the output format of the audio (mono left/right, stereo).
+
+
+Description
+-----------
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
+V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead.
+
+This ioctl call asks the Audio Device to select the requested channel if
+possible.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst b/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst
new file mode 100644
index 000000000000..19f2ed752ce2
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst
@@ -0,0 +1,55 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_CLEAR_BUFFER:
+
+==================
+AUDIO_CLEAR_BUFFER
+==================
+
+Name
+----
+
+AUDIO_CLEAR_BUFFER
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, AUDIO_CLEAR_BUFFER)
+    :name: AUDIO_CLEAR_BUFFER
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to clear all software and hardware
+buffers of the audio decoder device.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-continue.rst b/Documentation/userspace-api/media/dvb/audio-continue.rst
new file mode 100644
index 000000000000..b9a2b1e608b6
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-continue.rst
@@ -0,0 +1,56 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_CONTINUE:
+
+==============
+AUDIO_CONTINUE
+==============
+
+Name
+----
+
+AUDIO_CONTINUE
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, AUDIO_CONTINUE)
+    :name: AUDIO_CONTINUE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+Description
+-----------
+
+This ioctl restarts the decoding and playing process previously paused
+with AUDIO_PAUSE command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-fclose.rst b/Documentation/userspace-api/media/dvb/audio-fclose.rst
new file mode 100644
index 000000000000..448471d2f570
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-fclose.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _audio_fclose:
+
+========================
+Digital TV audio close()
+========================
+
+Name
+----
+
+Digital TV audio close()
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int close(int fd)
+    :name: dvb-audio-close
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+Description
+-----------
+
+This system call closes a previously opened audio device.
+
+
+Return Value
+------------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
diff --git a/Documentation/userspace-api/media/dvb/audio-fopen.rst b/Documentation/userspace-api/media/dvb/audio-fopen.rst
new file mode 100644
index 000000000000..f7ae94378f92
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-fopen.rst
@@ -0,0 +1,115 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _audio_fopen:
+
+=======================
+Digital TV audio open()
+=======================
+
+Name
+----
+
+Digital TV audio open()
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int open(const char *deviceName, int flags)
+    :name: dvb-audio-open
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  const char \*deviceName
+
+       -  Name of specific audio device.
+
+    -  .. row 2
+
+       -  int flags
+
+       -  A bit-wise OR of the following flags:
+
+    -  .. row 3
+
+       -
+       -  O_RDONLY read-only access
+
+    -  .. row 4
+
+       -
+       -  O_RDWR read/write access
+
+    -  .. row 5
+
+       -
+       -  O_NONBLOCK open in non-blocking mode
+
+    -  .. row 6
+
+       -
+       -  (blocking mode is the default)
+
+
+Description
+-----------
+
+This system call opens a named audio device (e.g.
+/dev/dvb/adapter0/audio0) for subsequent use. When an open() call has
+succeeded, the device will be ready for use. The significance of
+blocking or non-blocking mode is described in the documentation for
+functions where there is a difference. It does not affect the semantics
+of the open() call itself. A device opened in blocking mode can later be
+put into non-blocking mode (and vice versa) using the F_SETFL command
+of the fcntl system call. This is a standard system call, documented in
+the Linux manual page for fcntl. Only one user can open the Audio Device
+in O_RDWR mode. All other attempts to open the device in this mode will
+fail, and an error code will be returned. If the Audio Device is opened
+in O_RDONLY mode, the only ioctl call that can be used is
+AUDIO_GET_STATUS. All other call will return with an error code.
+
+
+Return Value
+------------
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``ENODEV``
+
+       -  Device driver not loaded/available.
+
+    -  .. row 2
+
+       -  ``EBUSY``
+
+       -  Device or resource busy.
+
+    -  .. row 3
+
+       -  ``EINVAL``
+
+       -  Invalid argument.
diff --git a/Documentation/userspace-api/media/dvb/audio-fwrite.rst b/Documentation/userspace-api/media/dvb/audio-fwrite.rst
new file mode 100644
index 000000000000..1482636f9b1a
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-fwrite.rst
@@ -0,0 +1,91 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _audio_fwrite:
+
+=========================
+Digital TV audio write()
+=========================
+
+Name
+----
+
+Digital TV audio write()
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: size_t write(int fd, const void *buf, size_t count)
+    :name: dvb-audio-write
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  void \*buf
+
+       -  Pointer to the buffer containing the PES data.
+
+    -  .. row 3
+
+       -  size_t count
+
+       -  Size of buf.
+
+
+Description
+-----------
+
+This system call can only be used if AUDIO_SOURCE_MEMORY is selected
+in the ioctl call AUDIO_SELECT_SOURCE. The data provided shall be in
+PES format. If O_NONBLOCK is not specified the function will block
+until buffer space is available. The amount of data to be transferred is
+implied by count.
+
+
+Return Value
+------------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EPERM``
+
+       -  Mode AUDIO_SOURCE_MEMORY not selected.
+
+    -  .. row 2
+
+       -  ``ENOMEM``
+
+       -  Attempted to write more data than the internal buffer can hold.
+
+    -  .. row 3
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
diff --git a/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst b/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst
new file mode 100644
index 000000000000..4e70d82969ad
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_GET_CAPABILITIES:
+
+======================
+AUDIO_GET_CAPABILITIES
+======================
+
+Name
+----
+
+AUDIO_GET_CAPABILITIES
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, AUDIO_GET_CAPABILITIES, unsigned int *cap)
+    :name: AUDIO_GET_CAPABILITIES
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  unsigned int \*cap
+
+       -  Returns a bit array of supported sound formats.
+
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to tell us about the decoding
+capabilities of the audio hardware.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-get-status.rst b/Documentation/userspace-api/media/dvb/audio-get-status.rst
new file mode 100644
index 000000000000..5a5180d642d4
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-get-status.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_GET_STATUS:
+
+================
+AUDIO_GET_STATUS
+================
+
+Name
+----
+
+AUDIO_GET_STATUS
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, AUDIO_GET_STATUS, struct audio_status *status)
+    :name: AUDIO_GET_STATUS
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  struct audio_status \*status
+
+       -  Returns the current state of Audio Device.
+
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to return the current state of the
+Audio Device.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-pause.rst b/Documentation/userspace-api/media/dvb/audio-pause.rst
new file mode 100644
index 000000000000..3e9fe06d3a0f
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-pause.rst
@@ -0,0 +1,57 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_PAUSE:
+
+===========
+AUDIO_PAUSE
+===========
+
+Name
+----
+
+AUDIO_PAUSE
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, AUDIO_PAUSE)
+    :name: AUDIO_PAUSE
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+Description
+-----------
+
+This ioctl call suspends the audio stream being played. Decoding and
+playing are paused. It is then possible to restart again decoding and
+playing process of the audio stream using AUDIO_CONTINUE command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-play.rst b/Documentation/userspace-api/media/dvb/audio-play.rst
new file mode 100644
index 000000000000..388a581a19f2
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-play.rst
@@ -0,0 +1,56 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_PLAY:
+
+==========
+AUDIO_PLAY
+==========
+
+Name
+----
+
+AUDIO_PLAY
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, AUDIO_PLAY)
+    :name: AUDIO_PLAY
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to start playing an audio stream
+from the selected source.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-select-source.rst b/Documentation/userspace-api/media/dvb/audio-select-source.rst
new file mode 100644
index 000000000000..1ce64507de93
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-select-source.rst
@@ -0,0 +1,65 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_SELECT_SOURCE:
+
+===================
+AUDIO_SELECT_SOURCE
+===================
+
+Name
+----
+
+AUDIO_SELECT_SOURCE
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, AUDIO_SELECT_SOURCE, struct audio_stream_source *source)
+    :name: AUDIO_SELECT_SOURCE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  audio_stream_source_t source
+
+       -  Indicates the source that shall be used for the Audio stream.
+
+
+Description
+-----------
+
+This ioctl call informs the audio device which source shall be used for
+the input data. The possible sources are demux or memory. If
+AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device
+through the write command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst b/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst
new file mode 100644
index 000000000000..3a0400dcfae4
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst
@@ -0,0 +1,67 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_SET_AV_SYNC:
+
+=================
+AUDIO_SET_AV_SYNC
+=================
+
+Name
+----
+
+AUDIO_SET_AV_SYNC
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, AUDIO_SET_AV_SYNC, boolean state)
+    :name: AUDIO_SET_AV_SYNC
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  boolean state
+
+       -  Tells the Digital TV subsystem if A/V synchronization shall be ON or OFF.
+
+          TRUE: AV-sync ON
+
+          FALSE: AV-sync OFF
+
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to turn ON or OFF A/V
+synchronization.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst b/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst
new file mode 100644
index 000000000000..0d2f23cc2f16
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst
@@ -0,0 +1,70 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_SET_BYPASS_MODE:
+
+=====================
+AUDIO_SET_BYPASS_MODE
+=====================
+
+Name
+----
+
+AUDIO_SET_BYPASS_MODE
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, AUDIO_SET_BYPASS_MODE, boolean mode)
+    :name: AUDIO_SET_BYPASS_MODE
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  boolean mode
+
+       -  Enables or disables the decoding of the current Audio stream in
+	  the Digital TV subsystem.
+
+          TRUE: Bypass is disabled
+
+          FALSE: Bypass is enabled
+
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to bypass the Audio decoder and
+forward the stream without decoding. This mode shall be used if streams
+that can’t be handled by the Digital TV system shall be decoded. Dolby
+DigitalTM streams are automatically forwarded by the Digital TV subsystem if
+the hardware can handle it.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-set-id.rst b/Documentation/userspace-api/media/dvb/audio-set-id.rst
new file mode 100644
index 000000000000..83fc1217fda0
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-set-id.rst
@@ -0,0 +1,67 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_SET_ID:
+
+============
+AUDIO_SET_ID
+============
+
+Name
+----
+
+AUDIO_SET_ID
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, AUDIO_SET_ID, int id)
+    :name: AUDIO_SET_ID
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  int id
+
+       -  audio sub-stream id
+
+
+Description
+-----------
+
+This ioctl selects which sub-stream is to be decoded if a program or
+system stream is sent to the video device. If no audio stream type is
+set the id has to be in [0xC0,0xDF] for MPEG sound, in [0x80,0x87] for
+AC3 and in [0xA0,0xA7] for LPCM. More specifications may follow for
+other stream types. If the stream type is set the id just specifies the
+substream id of the audio stream and only the first 5 bits are
+recognized.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-set-mixer.rst b/Documentation/userspace-api/media/dvb/audio-set-mixer.rst
new file mode 100644
index 000000000000..52bfc3af79dc
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-set-mixer.rst
@@ -0,0 +1,61 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_SET_MIXER:
+
+===============
+AUDIO_SET_MIXER
+===============
+
+Name
+----
+
+AUDIO_SET_MIXER
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, AUDIO_SET_MIXER, struct audio_mixer *mix)
+    :name: AUDIO_SET_MIXER
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  audio_mixer_t \*mix
+
+       -  mixer settings.
+
+
+Description
+-----------
+
+This ioctl lets you adjust the mixer settings of the audio decoder.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-set-mute.rst b/Documentation/userspace-api/media/dvb/audio-set-mute.rst
new file mode 100644
index 000000000000..8f3a8332cebc
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-set-mute.rst
@@ -0,0 +1,71 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_SET_MUTE:
+
+==============
+AUDIO_SET_MUTE
+==============
+
+Name
+----
+
+AUDIO_SET_MUTE
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, AUDIO_SET_MUTE, boolean state)
+    :name: AUDIO_SET_MUTE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  boolean state
+
+       -  Indicates if audio device shall mute or not.
+
+          TRUE: Audio Mute
+
+          FALSE: Audio Un-mute
+
+
+Description
+-----------
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD` with the
+``V4L2_DEC_CMD_START_MUTE_AUDIO`` flag instead.
+
+This ioctl call asks the audio device to mute the stream that is
+currently being played.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst b/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst
new file mode 100644
index 000000000000..c22bd247f03d
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst
@@ -0,0 +1,77 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_SET_STREAMTYPE:
+
+====================
+AUDIO_SET_STREAMTYPE
+====================
+
+Name
+----
+
+AUDIO_SET_STREAMTYPE
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(fd, AUDIO_SET_STREAMTYPE, int type)
+    :name: AUDIO_SET_STREAMTYPE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -
+
+       -  int type
+
+       -  stream type
+
+
+Description
+-----------
+
+This ioctl tells the driver which kind of audio stream to expect. This
+is useful if the stream offers several audio sub-streams like LPCM and
+AC3.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  type is not a valid or supported stream type.
diff --git a/Documentation/userspace-api/media/dvb/audio-stop.rst b/Documentation/userspace-api/media/dvb/audio-stop.rst
new file mode 100644
index 000000000000..291b6a42efac
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio-stop.rst
@@ -0,0 +1,56 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _AUDIO_STOP:
+
+==========
+AUDIO_STOP
+==========
+
+Name
+----
+
+AUDIO_STOP
+
+.. attention:: This ioctl is deprecated
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, AUDIO_STOP)
+    :name: AUDIO_STOP
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to stop playing the current
+stream.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/audio.rst b/Documentation/userspace-api/media/dvb/audio.rst
new file mode 100644
index 000000000000..e137c151335d
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio.rst
@@ -0,0 +1,34 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dvb_audio:
+
+#######################
+Digital TV Audio Device
+#######################
+
+The Digital TV audio device controls the MPEG2 audio decoder of the Digital
+TV hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data
+types and and ioctl definitions can be accessed by including
+``linux/dvb/audio.h`` in your application.
+
+Please note that some Digital TV cards don’t have their own MPEG decoder, which
+results in the omission of the audio and video device.
+
+These ioctls were also used by V4L2 to control MPEG decoders implemented
+in V4L2. The use of these ioctls for that purpose has been made obsolete
+and proper V4L2 ioctls or controls have been created to replace that
+functionality.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    audio_data_types
+    audio_function_calls
diff --git a/Documentation/userspace-api/media/dvb/audio_data_types.rst b/Documentation/userspace-api/media/dvb/audio_data_types.rst
new file mode 100644
index 000000000000..effe265b12d5
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio_data_types.rst
@@ -0,0 +1,123 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _audio_data_types:
+
+****************
+Audio Data Types
+****************
+
+This section describes the structures, data types and defines used when
+talking to the audio device.
+
+.. c:type:: audio_stream_source
+
+The audio stream source is set through the AUDIO_SELECT_SOURCE call
+and can take the following values, depending on whether we are replaying
+from an internal (demux) or external (user write) source.
+
+
+.. code-block:: c
+
+    typedef enum {
+	AUDIO_SOURCE_DEMUX,
+	AUDIO_SOURCE_MEMORY
+    } audio_stream_source_t;
+
+AUDIO_SOURCE_DEMUX selects the demultiplexer (fed either by the
+frontend or the DVR device) as the source of the video stream. If
+AUDIO_SOURCE_MEMORY is selected the stream comes from the application
+through the ``write()`` system call.
+
+
+.. c:type:: audio_play_state
+
+The following values can be returned by the AUDIO_GET_STATUS call
+representing the state of audio playback.
+
+
+.. code-block:: c
+
+    typedef enum {
+	AUDIO_STOPPED,
+	AUDIO_PLAYING,
+	AUDIO_PAUSED
+    } audio_play_state_t;
+
+
+.. c:type:: audio_channel_select
+
+The audio channel selected via AUDIO_CHANNEL_SELECT is determined by
+the following values.
+
+
+.. code-block:: c
+
+    typedef enum {
+	AUDIO_STEREO,
+	AUDIO_MONO_LEFT,
+	AUDIO_MONO_RIGHT,
+	AUDIO_MONO,
+	AUDIO_STEREO_SWAPPED
+    } audio_channel_select_t;
+
+
+.. c:type:: audio_status
+
+The AUDIO_GET_STATUS call returns the following structure informing
+about various states of the playback operation.
+
+
+.. code-block:: c
+
+    typedef struct audio_status {
+	boolean AV_sync_state;
+	boolean mute_state;
+	audio_play_state_t play_state;
+	audio_stream_source_t stream_source;
+	audio_channel_select_t channel_select;
+	boolean bypass_mode;
+	audio_mixer_t mixer_state;
+    } audio_status_t;
+
+
+.. c:type:: audio_mixer
+
+The following structure is used by the AUDIO_SET_MIXER call to set the
+audio volume.
+
+
+.. code-block:: c
+
+    typedef struct audio_mixer {
+	unsigned int volume_left;
+	unsigned int volume_right;
+    } audio_mixer_t;
+
+
+.. _audio_encodings:
+
+audio encodings
+===============
+
+A call to AUDIO_GET_CAPABILITIES returns an unsigned integer with the
+following bits set according to the hardwares capabilities.
+
+
+.. code-block:: c
+
+     #define AUDIO_CAP_DTS    1
+     #define AUDIO_CAP_LPCM   2
+     #define AUDIO_CAP_MP1    4
+     #define AUDIO_CAP_MP2    8
+     #define AUDIO_CAP_MP3   16
+     #define AUDIO_CAP_AAC   32
+     #define AUDIO_CAP_OGG   64
+     #define AUDIO_CAP_SDDS 128
+     #define AUDIO_CAP_AC3  256
diff --git a/Documentation/userspace-api/media/dvb/audio_function_calls.rst b/Documentation/userspace-api/media/dvb/audio_function_calls.rst
new file mode 100644
index 000000000000..be90a828fe29
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/audio_function_calls.rst
@@ -0,0 +1,37 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _audio_function_calls:
+
+********************
+Audio Function Calls
+********************
+
+.. toctree::
+    :maxdepth: 1
+
+    audio-fopen
+    audio-fclose
+    audio-fwrite
+    audio-stop
+    audio-play
+    audio-pause
+    audio-continue
+    audio-select-source
+    audio-set-mute
+    audio-set-av-sync
+    audio-set-bypass-mode
+    audio-channel-select
+    audio-bilingual-channel-select
+    audio-get-status
+    audio-get-capabilities
+    audio-clear-buffer
+    audio-set-id
+    audio-set-mixer
+    audio-set-streamtype
diff --git a/Documentation/userspace-api/media/dvb/ca-fclose.rst b/Documentation/userspace-api/media/dvb/ca-fclose.rst
new file mode 100644
index 000000000000..cedfb7ee6a01
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca-fclose.rst
@@ -0,0 +1,50 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _ca_fclose:
+
+=====================
+Digital TV CA close()
+=====================
+
+Name
+----
+
+Digital TV CA close()
+
+
+Synopsis
+--------
+
+.. c:function:: int close(int fd)
+    :name: dvb-ca-close
+
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
+
+Description
+-----------
+
+This system call closes a previously opened CA device.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/ca-fopen.rst b/Documentation/userspace-api/media/dvb/ca-fopen.rst
new file mode 100644
index 000000000000..aa0fde1739a8
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca-fopen.rst
@@ -0,0 +1,84 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _ca_fopen:
+
+====================
+Digital TV CA open()
+====================
+
+Name
+----
+
+Digital TV CA open()
+
+
+Synopsis
+--------
+
+.. c:function:: int open(const char *name, int flags)
+    :name: dvb-ca-open
+
+
+Arguments
+---------
+
+``name``
+  Name of specific Digital TV CA device.
+
+``flags``
+  A bit-wise OR of the following flags:
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -  - ``O_RDONLY``
+       - read-only access
+
+    -  - ``O_RDWR``
+       - read/write access
+
+    -  - ``O_NONBLOCK``
+       - open in non-blocking mode
+         (blocking mode is the default)
+
+
+Description
+-----------
+
+This system call opens a named ca device (e.g. ``/dev/dvb/adapter?/ca?``)
+for subsequent use.
+
+When an ``open()`` call has succeeded, the device will be ready for use. The
+significance of blocking or non-blocking mode is described in the
+documentation for functions where there is a difference. It does not
+affect the semantics of the ``open()`` call itself. A device opened in
+blocking mode can later be put into non-blocking mode (and vice versa)
+using the ``F_SETFL`` command of the ``fcntl`` system call. This is a
+standard system call, documented in the Linux manual page for fcntl.
+Only one user can open the CA Device in ``O_RDWR`` mode. All other
+attempts to open the device in this mode will fail, and an error code
+will be returned.
+
+
+Return Value
+------------
+
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/ca-get-cap.rst b/Documentation/userspace-api/media/dvb/ca-get-cap.rst
new file mode 100644
index 000000000000..b808d0592371
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca-get-cap.rst
@@ -0,0 +1,53 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CA_GET_CAP:
+
+==========
+CA_GET_CAP
+==========
+
+Name
+----
+
+CA_GET_CAP
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, CA_GET_CAP, struct ca_caps *caps)
+    :name: CA_GET_CAP
+
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
+
+``caps``
+  Pointer to struct :c:type:`ca_caps`.
+
+Description
+-----------
+
+Queries the Kernel for information about the available CA and descrambler
+slots, and their types.
+
+Return Value
+------------
+
+On success 0 is returned and :c:type:`ca_caps` is filled.
+
+On error, -1 is returned and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst b/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst
new file mode 100644
index 000000000000..396cc66a8243
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst
@@ -0,0 +1,49 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CA_GET_DESCR_INFO:
+
+=================
+CA_GET_DESCR_INFO
+=================
+
+Name
+----
+
+CA_GET_DESCR_INFO
+
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(fd, CA_GET_DESCR_INFO, struct ca_descr_info *desc)
+    :name: CA_GET_DESCR_INFO
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
+
+``desc``
+  Pointer to struct :c:type:`ca_descr_info`.
+
+Description
+-----------
+
+Returns information about all descrambler slots.
+
+Return Value
+------------
+
+On success 0 is returned, and :c:type:`ca_descr_info` is filled.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/ca-get-msg.rst b/Documentation/userspace-api/media/dvb/ca-get-msg.rst
new file mode 100644
index 000000000000..995f461d6879
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca-get-msg.rst
@@ -0,0 +1,59 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CA_GET_MSG:
+
+==========
+CA_GET_MSG
+==========
+
+Name
+----
+
+CA_GET_MSG
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, CA_GET_MSG, struct ca_msg *msg)
+    :name: CA_GET_MSG
+
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
+
+``msg``
+  Pointer to struct :c:type:`ca_msg`.
+
+Description
+-----------
+
+Receives a message via a CI CA module.
+
+.. note::
+
+   Please notice that, on most drivers, this is done by reading from
+   the /dev/adapter?/ca? device node.
+
+
+Return Value
+------------
+
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst b/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst
new file mode 100644
index 000000000000..c65987ff9cb3
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst
@@ -0,0 +1,64 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CA_GET_SLOT_INFO:
+
+================
+CA_GET_SLOT_INFO
+================
+
+Name
+----
+
+CA_GET_SLOT_INFO
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, CA_GET_SLOT_INFO, struct ca_slot_info *info)
+    :name: CA_GET_SLOT_INFO
+
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <cec-open>`.
+
+``info``
+  Pointer to struct :c:type:`ca_slot_info`.
+
+Description
+-----------
+
+Returns information about a CA slot identified by
+:c:type:`ca_slot_info`.slot_num.
+
+
+Return Value
+------------
+
+On success 0 is returned, and :c:type:`ca_slot_info` is filled.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -  -  ``ENODEV``
+       -  the slot is not available.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/ca-reset.rst b/Documentation/userspace-api/media/dvb/ca-reset.rst
new file mode 100644
index 000000000000..116a5a8eeb5d
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca-reset.rst
@@ -0,0 +1,51 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CA_RESET:
+
+========
+CA_RESET
+========
+
+Name
+----
+
+CA_RESET
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, CA_RESET)
+    :name: CA_RESET
+
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <cec-open>`.
+
+Description
+-----------
+
+Puts the Conditional Access hardware on its initial state. It should
+be called before start using the CA hardware.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/ca-send-msg.rst b/Documentation/userspace-api/media/dvb/ca-send-msg.rst
new file mode 100644
index 000000000000..716d88e0fdc5
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca-send-msg.rst
@@ -0,0 +1,58 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CA_SEND_MSG:
+
+===========
+CA_SEND_MSG
+===========
+
+Name
+----
+
+CA_SEND_MSG
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, CA_SEND_MSG, struct ca_msg *msg)
+    :name: CA_SEND_MSG
+
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <cec-open>`.
+
+``msg``
+  Pointer to struct :c:type:`ca_msg`.
+
+
+Description
+-----------
+
+Sends a message via a CI CA module.
+
+.. note::
+
+   Please notice that, on most drivers, this is done by writing
+   to the /dev/adapter?/ca? device node.
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/ca-set-descr.rst b/Documentation/userspace-api/media/dvb/ca-set-descr.rst
new file mode 100644
index 000000000000..2c57371675e2
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca-set-descr.rst
@@ -0,0 +1,53 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _CA_SET_DESCR:
+
+============
+CA_SET_DESCR
+============
+
+Name
+----
+
+CA_SET_DESCR
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, CA_SET_DESCR, struct ca_descr *desc)
+    :name: CA_SET_DESCR
+
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <cec-open>`.
+
+``msg``
+  Pointer to struct :c:type:`ca_descr`.
+
+Description
+-----------
+
+CA_SET_DESCR is used for feeding descrambler CA slots with descrambling
+keys (referred as control words).
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/ca.rst b/Documentation/userspace-api/media/dvb/ca.rst
new file mode 100644
index 000000000000..643b7c414943
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca.rst
@@ -0,0 +1,32 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dvb_ca:
+
+####################
+Digital TV CA Device
+####################
+
+The Digital TV CA device controls the conditional access hardware. It
+can be accessed through ``/dev/dvb/adapter?/ca?``. Data types and and ioctl
+definitions can be accessed by including ``linux/dvb/ca.h`` in your
+application.
+
+.. note::
+
+   There are three ioctls at this API that aren't documented:
+   :ref:`CA_GET_MSG`, :ref:`CA_SEND_MSG` and :ref:`CA_SET_DESCR`.
+   Documentation for them are welcome.
+
+.. toctree::
+    :maxdepth: 1
+
+    ca_data_types
+    ca_function_calls
+    ca_high_level
diff --git a/Documentation/userspace-api/media/dvb/ca_data_types.rst b/Documentation/userspace-api/media/dvb/ca_data_types.rst
new file mode 100644
index 000000000000..20e2b552144f
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca_data_types.rst
@@ -0,0 +1,16 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _ca_data_types:
+
+*************
+CA Data Types
+*************
+
+.. kernel-doc:: include/uapi/linux/dvb/ca.h
diff --git a/Documentation/userspace-api/media/dvb/ca_function_calls.rst b/Documentation/userspace-api/media/dvb/ca_function_calls.rst
new file mode 100644
index 000000000000..b8aceb1895b6
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca_function_calls.rst
@@ -0,0 +1,27 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _ca_function_calls:
+
+*****************
+CA Function Calls
+*****************
+
+.. toctree::
+    :maxdepth: 1
+
+    ca-fopen
+    ca-fclose
+    ca-reset
+    ca-get-cap
+    ca-get-slot-info
+    ca-get-descr-info
+    ca-get-msg
+    ca-send-msg
+    ca-set-descr
diff --git a/Documentation/userspace-api/media/dvb/ca_high_level.rst b/Documentation/userspace-api/media/dvb/ca_high_level.rst
new file mode 100644
index 000000000000..a73f3691c31f
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/ca_high_level.rst
@@ -0,0 +1,157 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The High level CI API
+=====================
+
+.. note::
+
+   This documentation is outdated.
+
+This document describes the high level CI API as in accordance to the
+Linux DVB API.
+
+
+With the High Level CI approach any new card with almost any random
+architecture can be implemented with this style, the definitions
+inside the switch statement can be easily adapted for any card, thereby
+eliminating the need for any additional ioctls.
+
+The disadvantage is that the driver/hardware has to manage the rest. For
+the application programmer it would be as simple as sending/receiving an
+array to/from the CI ioctls as defined in the Linux DVB API. No changes
+have been made in the API to accommodate this feature.
+
+
+Why the need for another CI interface?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This is one of the most commonly asked question. Well a nice question.
+Strictly speaking this is not a new interface.
+
+The CI interface is defined in the DVB API in ca.h as:
+
+.. code-block:: c
+
+	typedef struct ca_slot_info {
+		int num;               /* slot number */
+
+		int type;              /* CA interface this slot supports */
+	#define CA_CI            1     /* CI high level interface */
+	#define CA_CI_LINK       2     /* CI link layer level interface */
+	#define CA_CI_PHYS       4     /* CI physical layer level interface */
+	#define CA_DESCR         8     /* built-in descrambler */
+	#define CA_SC          128     /* simple smart card interface */
+
+		unsigned int flags;
+	#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
+	#define CA_CI_MODULE_READY   2
+	} ca_slot_info_t;
+
+This CI interface follows the CI high level interface, which is not
+implemented by most applications. Hence this area is revisited.
+
+This CI interface is quite different in the case that it tries to
+accommodate all other CI based devices, that fall into the other categories.
+
+This means that this CI interface handles the EN50221 style tags in the
+Application layer only and no session management is taken care of by the
+application. The driver/hardware will take care of all that.
+
+This interface is purely an EN50221 interface exchanging APDU's. This
+means that no session management, link layer or a transport layer do
+exist in this case in the application to driver communication. It is
+as simple as that. The driver/hardware has to take care of that.
+
+With this High Level CI interface, the interface can be defined with the
+regular ioctls.
+
+All these ioctls are also valid for the High level CI interface
+
+#define CA_RESET          _IO('o', 128)
+#define CA_GET_CAP        _IOR('o', 129, ca_caps_t)
+#define CA_GET_SLOT_INFO  _IOR('o', 130, ca_slot_info_t)
+#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
+#define CA_GET_MSG        _IOR('o', 132, ca_msg_t)
+#define CA_SEND_MSG       _IOW('o', 133, ca_msg_t)
+#define CA_SET_DESCR      _IOW('o', 134, ca_descr_t)
+
+
+On querying the device, the device yields information thus:
+
+.. code-block:: none
+
+	CA_GET_SLOT_INFO
+	----------------------------
+	Command = [info]
+	APP: Number=[1]
+	APP: Type=[1]
+	APP: flags=[1]
+	APP: CI High level interface
+	APP: CA/CI Module Present
+
+	CA_GET_CAP
+	----------------------------
+	Command = [caps]
+	APP: Slots=[1]
+	APP: Type=[1]
+	APP: Descrambler keys=[16]
+	APP: Type=[1]
+
+	CA_SEND_MSG
+	----------------------------
+	Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1]
+	Found CA descriptor @ program level
+
+	(20) ES type=[2] ES pid=[201]  ES length =[0 (0x0)]
+	(25) ES type=[4] ES pid=[301]  ES length =[0 (0x0)]
+	ca_message length is 25 (0x19) bytes
+	EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00]
+
+
+Not all ioctl's are implemented in the driver from the API, the other
+features of the hardware that cannot be implemented by the API are achieved
+using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is
+used to exchange the data to maintain compatibility with other hardware.
+
+.. code-block:: c
+
+	/* a message to/from a CI-CAM */
+	typedef struct ca_msg {
+		unsigned int index;
+		unsigned int type;
+		unsigned int length;
+		unsigned char msg[256];
+	} ca_msg_t;
+
+
+The flow of data can be described thus,
+
+.. code-block:: none
+
+	App (User)
+	-----
+	parse
+	  |
+	  |
+	  v
+	en50221 APDU (package)
+   --------------------------------------
+   |	  |				| High Level CI driver
+   |	  |				|
+   |	  v				|
+   |	en50221 APDU (unpackage)	|
+   |	  |				|
+   |	  |				|
+   |	  v				|
+   |	sanity checks			|
+   |	  |				|
+   |	  |				|
+   |	  v				|
+   |	do (H/W dep)			|
+   --------------------------------------
+	  |    Hardware
+	  |
+	  v
+
+The High Level CI interface uses the EN50221 DVB standard, following a
+standard ensures futureproofness.
diff --git a/Documentation/userspace-api/media/dvb/demux.rst b/Documentation/userspace-api/media/dvb/demux.rst
new file mode 100644
index 000000000000..00397b075e0f
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/demux.rst
@@ -0,0 +1,30 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dvb_demux:
+
+#######################
+Digital TV Demux Device
+#######################
+
+The Digital TV demux device controls the MPEG-TS filters for the
+digital TV. If the driver and hardware supports, those filters are
+implemented at the hardware. Otherwise, the Kernel provides a software
+emulation.
+
+It can be accessed through ``/dev/adapter?/demux?``. Data types and and
+ioctl definitions can be accessed by including ``linux/dvb/dmx.h`` in
+your application.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    dmx_types
+    dmx_fcalls
diff --git a/Documentation/userspace-api/media/dvb/dmx-add-pid.rst b/Documentation/userspace-api/media/dvb/dmx-add-pid.rst
new file mode 100644
index 000000000000..e309cd56fdf0
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-add-pid.rst
@@ -0,0 +1,56 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_ADD_PID:
+
+===========
+DMX_ADD_PID
+===========
+
+Name
+----
+
+DMX_ADD_PID
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, DMX_ADD_PID, __u16 *pid)
+    :name: DMX_ADD_PID
+
+
+Arguments
+---------
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
+
+``pid``
+   PID number to be filtered.
+
+
+Description
+-----------
+
+This ioctl call allows to add multiple PIDs to a transport stream filter
+previously set up with :ref:`DMX_SET_PES_FILTER` and output equal to
+:c:type:`DMX_OUT_TSDEMUX_TAP <dmx_output>`.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-expbuf.rst b/Documentation/userspace-api/media/dvb/dmx-expbuf.rst
new file mode 100644
index 000000000000..f76db8ce3cfa
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-expbuf.rst
@@ -0,0 +1,97 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_EXPBUF:
+
+****************
+ioctl DMX_EXPBUF
+****************
+
+Name
+====
+
+DMX_EXPBUF - Export a buffer as a DMABUF file descriptor.
+
+.. warning:: this API is still experimental
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, DMX_EXPBUF, struct dmx_exportbuffer *argp )
+    :name: DMX_EXPBUF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <dmx_fopen>`.
+
+``argp``
+    Pointer to struct :c:type:`dmx_exportbuffer`.
+
+
+Description
+===========
+
+This ioctl is an extension to the memory mapping I/O method.
+It can be used to export a buffer as a DMABUF file at any time after
+buffers have been allocated with the :ref:`DMX_REQBUFS` ioctl.
+
+To export a buffer, applications fill struct :c:type:`dmx_exportbuffer`.
+Applications must set the ``index`` field. Valid index numbers
+range from zero to the number of buffers allocated with :ref:`DMX_REQBUFS`
+(struct :c:type:`dmx_requestbuffers` ``count``) minus one.
+Additional flags may be posted in the ``flags`` field. Refer to a manual
+for open() for details. Currently only O_CLOEXEC, O_RDONLY, O_WRONLY,
+and O_RDWR are supported.
+All other fields must be set to zero. In the
+case of multi-planar API, every plane is exported separately using
+multiple :ref:`DMX_EXPBUF` calls.
+
+After calling :ref:`DMX_EXPBUF` the ``fd`` field will be set by a
+driver, on success. This is a DMABUF file descriptor. The application may
+pass it to other DMABUF-aware devices. It is recommended to close a DMABUF
+file when it is no longer used to allow the associated memory to be reclaimed.
+
+
+Examples
+========
+
+
+.. code-block:: c
+
+    int buffer_export(int v4lfd, enum dmx_buf_type bt, int index, int *dmafd)
+    {
+	struct dmx_exportbuffer expbuf;
+
+	memset(&expbuf, 0, sizeof(expbuf));
+	expbuf.type = bt;
+	expbuf.index = index;
+	if (ioctl(v4lfd, DMX_EXPBUF, &expbuf) == -1) {
+	    perror("DMX_EXPBUF");
+	    return -1;
+	}
+
+	*dmafd = expbuf.fd;
+
+	return 0;
+    }
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    A queue is not in MMAP mode or DMABUF exporting is not supported or
+    ``flags`` or ``index`` fields are invalid.
diff --git a/Documentation/userspace-api/media/dvb/dmx-fclose.rst b/Documentation/userspace-api/media/dvb/dmx-fclose.rst
new file mode 100644
index 000000000000..e93bc60da508
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-fclose.rst
@@ -0,0 +1,52 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dmx_fclose:
+
+========================
+Digital TV demux close()
+========================
+
+Name
+----
+
+Digital TV demux close()
+
+
+Synopsis
+--------
+
+.. c:function:: int close(int fd)
+    :name: dvb-dmx-close
+
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to
+  :c:func:`open() <dvb-dmx-open>`.
+
+Description
+-----------
+
+This system call deactivates and deallocates a filter that was
+previously allocated via the :c:func:`open() <dvb-dmx-open>` call.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error, -1 is returned and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-fopen.rst b/Documentation/userspace-api/media/dvb/dmx-fopen.rst
new file mode 100644
index 000000000000..ea988714558e
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-fopen.rst
@@ -0,0 +1,98 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dmx_fopen:
+
+=======================
+Digital TV demux open()
+=======================
+
+Name
+----
+
+Digital TV demux open()
+
+
+Synopsis
+--------
+
+.. c:function:: int open(const char *deviceName, int flags)
+    :name: dvb-dmx-open
+
+Arguments
+---------
+
+``name``
+  Name of specific Digital TV demux device.
+
+``flags``
+  A bit-wise OR of the following flags:
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -
+       - ``O_RDONLY``
+       - read-only access
+
+    -
+       - ``O_RDWR``
+       - read/write access
+
+    -
+       - ``O_NONBLOCK``
+       - open in non-blocking mode
+         (blocking mode is the default)
+
+
+Description
+-----------
+
+This system call, used with a device name of ``/dev/dvb/adapter?/demux?``,
+allocates a new filter and returns a handle which can be used for
+subsequent control of that filter. This call has to be made for each
+filter to be used, i.e. every returned file descriptor is a reference to
+a single filter. ``/dev/dvb/adapter?/dvr?`` is a logical device to be used
+for retrieving Transport Streams for digital video recording. When
+reading from this device a transport stream containing the packets from
+all PES filters set in the corresponding demux device
+(``/dev/dvb/adapter?/demux?``) having the output set to ``DMX_OUT_TS_TAP``.
+A recorded Transport Stream is replayed by writing to this device.
+
+The significance of blocking or non-blocking mode is described in the
+documentation for functions where there is a difference. It does not
+affect the semantics of the ``open()`` call itself. A device opened
+in blocking mode can later be put into non-blocking mode (and vice versa)
+using the ``F_SETFL`` command of the fcntl system call.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -  -  ``EMFILE``
+       -  “Too many open files”, i.e. no more filters available.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-fread.rst b/Documentation/userspace-api/media/dvb/dmx-fread.rst
new file mode 100644
index 000000000000..25501be818f8
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-fread.rst
@@ -0,0 +1,87 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dmx_fread:
+
+=======================
+Digital TV demux read()
+=======================
+
+Name
+----
+
+Digital TV demux read()
+
+
+Synopsis
+--------
+
+.. c:function:: size_t read(int fd, void *buf, size_t count)
+    :name: dvb-dmx-read
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
+
+ ``buf``
+   Buffer to be filled
+
+``count``
+   Max number of bytes to read
+
+Description
+-----------
+
+This system call returns filtered data, which might be section or Packetized
+Elementary Stream (PES) data. The filtered data is transferred from
+the driver’s internal circular buffer to ``buf``. The maximum amount of data
+to be transferred is implied by count.
+
+.. note::
+
+   if a section filter created with
+   :c:type:`DMX_CHECK_CRC <dmx_sct_filter_params>` flag set,
+   data that fails on CRC check will be silently ignored.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -  -  ``EWOULDBLOCK``
+       -  No data to return and ``O_NONBLOCK`` was specified.
+
+    -  -  ``EOVERFLOW``
+       -  The filtered data was not read from the buffer in due time,
+	  resulting in non-read data being lost. The buffer is flushed.
+
+    -  -  ``ETIMEDOUT``
+       -  The section was not loaded within the stated timeout period.
+          See ioctl :ref:`DMX_SET_FILTER` for how to set a timeout.
+
+    -  -  ``EFAULT``
+       -  The driver failed to write to the callers buffer due to an
+          invalid \*buf pointer.
+
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-fwrite.rst b/Documentation/userspace-api/media/dvb/dmx-fwrite.rst
new file mode 100644
index 000000000000..4400f4ef8c65
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-fwrite.rst
@@ -0,0 +1,79 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dmx_fwrite:
+
+========================
+Digital TV demux write()
+========================
+
+Name
+----
+
+Digital TV demux write()
+
+
+Synopsis
+--------
+
+.. c:function:: ssize_t write(int fd, const void *buf, size_t count)
+    :name: dvb-dmx-write
+
+Arguments
+---------
+
+``fd``
+  File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`.
+
+``buf``
+     Buffer with data to be written
+
+``count``
+    Number of bytes at the buffer
+
+Description
+-----------
+
+This system call is only provided by the logical device
+``/dev/dvb/adapter?/dvr?``, associated with the physical demux device that
+provides the actual DVR functionality. It is used for replay of a
+digitally recorded Transport Stream. Matching filters have to be defined
+in the corresponding physical demux device, ``/dev/dvb/adapter?/demux?``.
+The amount of data to be transferred is implied by count.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -  -  ``EWOULDBLOCK``
+       -  No data was written. This might happen if ``O_NONBLOCK`` was
+	  specified and there is no more buffer space available (if
+	  ``O_NONBLOCK`` is not specified the function will block until buffer
+	  space is available).
+
+    -  -  ``EBUSY``
+       -  This error code indicates that there are conflicting requests. The
+	  corresponding demux device is setup to receive data from the
+	  front- end. Make sure that these filters are stopped and that the
+	  filters with input set to ``DMX_IN_DVR`` are started.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst b/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst
new file mode 100644
index 000000000000..e1873e3fdc01
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst
@@ -0,0 +1,71 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_GET_PES_PIDS:
+
+================
+DMX_GET_PES_PIDS
+================
+
+Name
+----
+
+DMX_GET_PES_PIDS
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, DMX_GET_PES_PIDS, __u16 pids[5])
+    :name: DMX_GET_PES_PIDS
+
+Arguments
+---------
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
+
+``pids``
+    Array used to store 5 Program IDs.
+
+
+Description
+-----------
+
+This ioctl allows to query a DVB device to return the first PID used
+by audio, video, textext, subtitle and PCR programs on a given service.
+They're stored as:
+
+=======================	========	=======================================
+PID  element		position	content
+=======================	========	=======================================
+pids[DMX_PES_AUDIO]	0		first audio PID
+pids[DMX_PES_VIDEO]	1		first video PID
+pids[DMX_PES_TELETEXT]	2		first teletext PID
+pids[DMX_PES_SUBTITLE]	3		first subtitle PID
+pids[DMX_PES_PCR]	4		first Program Clock Reference PID
+=======================	========	=======================================
+
+
+.. note::
+
+	A value equal to 0xffff means that the PID was not filled by the
+	Kernel.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-get-stc.rst b/Documentation/userspace-api/media/dvb/dmx-get-stc.rst
new file mode 100644
index 000000000000..026a884edb0a
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-get-stc.rst
@@ -0,0 +1,73 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_GET_STC:
+
+===========
+DMX_GET_STC
+===========
+
+Name
+----
+
+DMX_GET_STC
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, DMX_GET_STC, struct dmx_stc *stc)
+    :name: DMX_GET_STC
+
+Arguments
+---------
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
+
+``stc``
+    Pointer to :c:type:`dmx_stc` where the stc data is to be stored.
+
+
+Description
+-----------
+
+This ioctl call returns the current value of the system time counter
+(which is driven by a PES filter of type :c:type:`DMX_PES_PCR <dmx_ts_pes>`).
+Some hardware supports more than one STC, so you must specify which one by
+setting the :c:type:`num <dmx_stc>` field of stc before the ioctl (range 0...n).
+The result is returned in form of a ratio with a 64 bit numerator
+and a 32 bit denominator, so the real 90kHz STC value is
+``stc->stc / stc->base``.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  Invalid stc number.
+
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-mmap.rst b/Documentation/userspace-api/media/dvb/dmx-mmap.rst
new file mode 100644
index 000000000000..828ba9df73e2
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-mmap.rst
@@ -0,0 +1,125 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dmx-mmap:
+
+*****************
+Digital TV mmap()
+*****************
+
+Name
+====
+
+dmx-mmap - Map device memory into application address space
+
+.. warning:: this API is still experimental
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+    #include <sys/mman.h>
+
+
+.. c:function:: void *mmap( void *start, size_t length, int prot, int flags, int fd, off_t offset )
+    :name: dmx-mmap
+
+Arguments
+=========
+
+``start``
+    Map the buffer to this address in the application's address space.
+    When the ``MAP_FIXED`` flag is specified, ``start`` must be a
+    multiple of the pagesize and mmap will fail when the specified
+    address cannot be used. Use of this option is discouraged;
+    applications should just specify a ``NULL`` pointer here.
+
+``length``
+    Length of the memory area to map. This must be a multiple of the
+    DVB packet length (188, on most drivers).
+
+``prot``
+    The ``prot`` argument describes the desired memory protection.
+    Regardless of the device type and the direction of data exchange it
+    should be set to ``PROT_READ`` | ``PROT_WRITE``, permitting read
+    and write access to image buffers. Drivers should support at least
+    this combination of flags.
+
+``flags``
+    The ``flags`` parameter specifies the type of the mapped object,
+    mapping options and whether modifications made to the mapped copy of
+    the page are private to the process or are to be shared with other
+    references.
+
+    ``MAP_FIXED`` requests that the driver selects no other address than
+    the one specified. If the specified address cannot be used,
+    :ref:`mmap() <dmx-mmap>` will fail. If ``MAP_FIXED`` is specified,
+    ``start`` must be a multiple of the pagesize. Use of this option is
+    discouraged.
+
+    One of the ``MAP_SHARED`` or ``MAP_PRIVATE`` flags must be set.
+    ``MAP_SHARED`` allows applications to share the mapped memory with
+    other (e. g. child-) processes.
+
+    .. note::
+
+       The Linux Digital TV applications should not set the
+       ``MAP_PRIVATE``, ``MAP_DENYWRITE``, ``MAP_EXECUTABLE`` or ``MAP_ANON``
+       flags.
+
+``fd``
+    File descriptor returned by :ref:`open() <dmx_fopen>`.
+
+``offset``
+    Offset of the buffer in device memory, as returned by
+    :ref:`DMX_QUERYBUF` ioctl.
+
+
+Description
+===========
+
+The :ref:`mmap() <dmx-mmap>` function asks to map ``length`` bytes starting at
+``offset`` in the memory of the device specified by ``fd`` into the
+application address space, preferably at address ``start``. This latter
+address is a hint only, and is usually specified as 0.
+
+Suitable length and offset parameters are queried with the
+:ref:`DMX_QUERYBUF` ioctl. Buffers must be allocated with the
+:ref:`DMX_REQBUFS` ioctl before they can be queried.
+
+To unmap buffers the :ref:`munmap() <dmx-munmap>` function is used.
+
+
+Return Value
+============
+
+On success :ref:`mmap() <dmx-mmap>` returns a pointer to the mapped buffer. On
+error ``MAP_FAILED`` (-1) is returned, and the ``errno`` variable is set
+appropriately. Possible error codes are:
+
+EBADF
+    ``fd`` is not a valid file descriptor.
+
+EACCES
+    ``fd`` is not open for reading and writing.
+
+EINVAL
+    The ``start`` or ``length`` or ``offset`` are not suitable. (E. g.
+    they are too large, or not aligned on a ``PAGESIZE`` boundary.)
+
+    The ``flags`` or ``prot`` value is not supported.
+
+    No buffers have been allocated with the
+    :ref:`DMX_REQBUFS` ioctl.
+
+ENOMEM
+    Not enough physical or virtual memory was available to complete the
+    request.
diff --git a/Documentation/userspace-api/media/dvb/dmx-munmap.rst b/Documentation/userspace-api/media/dvb/dmx-munmap.rst
new file mode 100644
index 000000000000..905fdd585a86
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-munmap.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dmx-munmap:
+
+************
+DVB munmap()
+************
+
+Name
+====
+
+dmx-munmap - Unmap device memory
+
+.. warning:: This API is still experimental.
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+    #include <sys/mman.h>
+
+
+.. c:function:: int munmap( void *start, size_t length )
+    :name: dmx-munmap
+
+Arguments
+=========
+
+``start``
+    Address of the mapped buffer as returned by the
+    :ref:`mmap() <dmx-mmap>` function.
+
+``length``
+    Length of the mapped buffer. This must be the same value as given to
+    :ref:`mmap() <dmx-mmap>`.
+
+
+Description
+===========
+
+Unmaps a previously with the :ref:`mmap() <dmx-mmap>` function mapped
+buffer and frees it, if possible.
+
+
+Return Value
+============
+
+On success :ref:`munmap() <dmx-munmap>` returns 0, on failure -1 and the
+``errno`` variable is set appropriately:
+
+EINVAL
+    The ``start`` or ``length`` is incorrect, or no buffers have been
+    mapped yet.
diff --git a/Documentation/userspace-api/media/dvb/dmx-qbuf.rst b/Documentation/userspace-api/media/dvb/dmx-qbuf.rst
new file mode 100644
index 000000000000..2c4657c2c86d
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-qbuf.rst
@@ -0,0 +1,93 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_QBUF:
+
+*************************
+ioctl DMX_QBUF, DMX_DQBUF
+*************************
+
+Name
+====
+
+DMX_QBUF - DMX_DQBUF - Exchange a buffer with the driver
+
+.. warning:: this API is still experimental
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, DMX_QBUF, struct dmx_buffer *argp )
+    :name: DMX_QBUF
+
+.. c:function:: int ioctl( int fd, DMX_DQBUF, struct dmx_buffer *argp )
+    :name: DMX_DQBUF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <dmx_fopen>`.
+
+``argp``
+    Pointer to struct :c:type:`dmx_buffer`.
+
+
+Description
+===========
+
+Applications call the ``DMX_QBUF`` ioctl to enqueue an empty
+(capturing) or filled (output) buffer in the driver's incoming queue.
+The semantics depend on the selected I/O method.
+
+To enqueue a buffer applications set the ``index`` field. Valid index
+numbers range from zero to the number of buffers allocated with
+:ref:`DMX_REQBUFS` (struct :c:type:`dmx_requestbuffers` ``count``) minus
+one. The contents of the struct :c:type:`dmx_buffer` returned
+by a :ref:`DMX_QUERYBUF` ioctl will do as well.
+
+When ``DMX_QBUF`` is called with a pointer to this structure, it locks the
+memory pages of the buffer in physical memory, so they cannot be swapped
+out to disk. Buffers remain locked until dequeued, until the
+the device is closed.
+
+Applications call the ``DMX_DQBUF`` ioctl to dequeue a filled
+(capturing) buffer from the driver's outgoing queue.
+They just set the ``index`` field with the buffer ID to be queued.
+When ``DMX_DQBUF`` is called with a pointer to struct :c:type:`dmx_buffer`,
+the driver fills the remaining fields or returns an error code.
+
+By default ``DMX_DQBUF`` blocks when no buffer is in the outgoing
+queue. When the ``O_NONBLOCK`` flag was given to the
+:ref:`open() <dmx_fopen>` function, ``DMX_DQBUF`` returns
+immediately with an ``EAGAIN`` error code when no buffer is available.
+
+The struct :c:type:`dmx_buffer` structure is specified in
+:ref:`buffer`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EAGAIN
+    Non-blocking I/O has been selected using ``O_NONBLOCK`` and no
+    buffer was in the outgoing queue.
+
+EINVAL
+    The ``index`` is out of bounds, or no buffers have been allocated yet.
+
+EIO
+    ``DMX_DQBUF`` failed due to an internal error. Can also indicate
+    temporary problems like signal loss or CRC errors.
diff --git a/Documentation/userspace-api/media/dvb/dmx-querybuf.rst b/Documentation/userspace-api/media/dvb/dmx-querybuf.rst
new file mode 100644
index 000000000000..6e234daf1c44
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-querybuf.rst
@@ -0,0 +1,72 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_QUERYBUF:
+
+******************
+ioctl DMX_QUERYBUF
+******************
+
+Name
+====
+
+DMX_QUERYBUF - Query the status of a buffer
+
+.. warning:: this API is still experimental
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, DMX_QUERYBUF, struct dvb_buffer *argp )
+    :name: DMX_QUERYBUF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <dmx_fopen>`.
+
+``argp``
+    Pointer to struct :c:type:`dvb_buffer`.
+
+
+Description
+===========
+
+This ioctl is part of the mmap streaming I/O method. It can
+be used to query the status of a buffer at any time after buffers have
+been allocated with the :ref:`DMX_REQBUFS` ioctl.
+
+Applications set the ``index`` field. Valid index numbers range from zero
+to the number of buffers allocated with :ref:`DMX_REQBUFS`
+(struct :c:type:`dvb_requestbuffers` ``count``) minus one.
+
+After calling :ref:`DMX_QUERYBUF` with a pointer to this structure,
+drivers return an error code or fill the rest of the structure.
+
+On success, the ``offset`` will contain the offset of the buffer from the
+start of the device memory, the ``length`` field its size, and the
+``bytesused`` the number of bytes occupied by data in the buffer (payload).
+
+Return Value
+============
+
+On success 0 is returned, the ``offset`` will contain the offset of the
+buffer from the start of the device memory, the ``length`` field its size,
+and the ``bytesused`` the number of bytes occupied by data in the buffer
+(payload).
+
+On error it returns -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The ``index`` is out of bounds.
diff --git a/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst b/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst
new file mode 100644
index 000000000000..dee553a48b63
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst
@@ -0,0 +1,57 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_REMOVE_PID:
+
+==============
+DMX_REMOVE_PID
+==============
+
+Name
+----
+
+DMX_REMOVE_PID
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, DMX_REMOVE_PID, __u16 *pid)
+    :name: DMX_REMOVE_PID
+
+
+Arguments
+---------
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
+
+``pid``
+    PID of the PES filter to be removed.
+
+
+Description
+-----------
+
+This ioctl call allows to remove a PID when multiple PIDs are set on a
+transport stream filter, e. g. a filter previously set up with output
+equal to :c:type:`DMX_OUT_TSDEMUX_TAP <dmx_output>`, created via either
+:ref:`DMX_SET_PES_FILTER` or :ref:`DMX_ADD_PID`.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst b/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst
new file mode 100644
index 000000000000..9b9be45d2b0b
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst
@@ -0,0 +1,83 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_REQBUFS:
+
+*****************
+ioctl DMX_REQBUFS
+*****************
+
+Name
+====
+
+DMX_REQBUFS - Initiate Memory Mapping and/or DMA buffer I/O
+
+.. warning:: this API is still experimental
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, DMX_REQBUFS, struct dmx_requestbuffers *argp )
+    :name: DMX_REQBUFS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <dmx_fopen>`.
+
+``argp``
+    Pointer to struct :c:type:`dmx_requestbuffers`.
+
+Description
+===========
+
+This ioctl is used to initiate a memory mapped or DMABUF based demux I/O.
+
+Memory mapped buffers are located in device memory and must be allocated
+with this ioctl before they can be mapped into the application's address
+space. User buffers are allocated by applications themselves, and this
+ioctl is merely used to switch the driver into user pointer I/O mode and
+to setup some internal structures. Similarly, DMABUF buffers are
+allocated by applications through a device driver, and this ioctl only
+configures the driver into DMABUF I/O mode without performing any direct
+allocation.
+
+To allocate device buffers applications initialize all fields of the
+struct :c:type:`dmx_requestbuffers` structure. They set the  ``count`` field
+to the desired number of buffers,  and ``size`` to the size of each
+buffer.
+
+When the ioctl is called with a pointer to this structure, the driver will
+attempt to allocate the requested number of buffers and it stores the actual
+number allocated in the ``count`` field. The ``count`` can be smaller than the number requested, even zero, when the driver runs out of free memory. A larger
+number is also possible when the driver requires more buffers to
+function correctly. The actual allocated buffer size can is returned
+at ``size``, and can be smaller than what's requested.
+
+When this I/O method is not supported, the ioctl returns an ``EOPNOTSUPP``
+error code.
+
+Applications can call :ref:`DMX_REQBUFS` again to change the number of
+buffers, however this cannot succeed when any buffers are still mapped.
+A ``count`` value of zero frees all buffers, after aborting or finishing
+any DMA in progress.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EOPNOTSUPP
+    The  the requested I/O method is not supported.
diff --git a/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst b/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst
new file mode 100644
index 000000000000..7c91da1da4be
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst
@@ -0,0 +1,57 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_SET_BUFFER_SIZE:
+
+===================
+DMX_SET_BUFFER_SIZE
+===================
+
+Name
+----
+
+DMX_SET_BUFFER_SIZE
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, DMX_SET_BUFFER_SIZE, unsigned long size)
+    :name: DMX_SET_BUFFER_SIZE
+
+
+Arguments
+---------
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
+
+``size``
+    Unsigned long size
+
+Description
+-----------
+
+This ioctl call is used to set the size of the circular buffer used for
+filtered data. The default size is two maximum sized sections, i.e. if
+this function is not called a buffer size of ``2 * 4096`` bytes will be
+used.
+
+
+Return Value
+------------
+
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-set-filter.rst b/Documentation/userspace-api/media/dvb/dmx-set-filter.rst
new file mode 100644
index 000000000000..cb3333349bd0
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-set-filter.rst
@@ -0,0 +1,64 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_SET_FILTER:
+
+==============
+DMX_SET_FILTER
+==============
+
+Name
+----
+
+DMX_SET_FILTER
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, DMX_SET_FILTER, struct dmx_sct_filter_params *params)
+    :name: DMX_SET_FILTER
+
+Arguments
+---------
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
+
+``params``
+
+    Pointer to structure containing filter parameters.
+
+
+Description
+-----------
+
+This ioctl call sets up a filter according to the filter and mask
+parameters provided. A timeout may be defined stating number of seconds
+to wait for a section to be loaded. A value of 0 means that no timeout
+should be applied. Finally there is a flag field where it is possible to
+state whether a section should be CRC-checked, whether the filter should
+be a ”one-shot” filter, i.e. if the filtering operation should be
+stopped after the first section is received, and whether the filtering
+operation should be started immediately (without waiting for a
+:ref:`DMX_START` ioctl call). If a filter was previously set-up, this
+filter will be canceled, and the receive buffer will be flushed.
+
+
+Return Value
+------------
+
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst b/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst
new file mode 100644
index 000000000000..26da56947652
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst
@@ -0,0 +1,76 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_SET_PES_FILTER:
+
+==================
+DMX_SET_PES_FILTER
+==================
+
+Name
+----
+
+DMX_SET_PES_FILTER
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, DMX_SET_PES_FILTER, struct dmx_pes_filter_params *params)
+    :name: DMX_SET_PES_FILTER
+
+
+Arguments
+---------
+
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
+
+``params``
+    Pointer to structure containing filter parameters.
+
+
+Description
+-----------
+
+This ioctl call sets up a PES filter according to the parameters
+provided. By a PES filter is meant a filter that is based just on the
+packet identifier (PID), i.e. no PES header or payload filtering
+capability is supported.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+
+    -  .. row 1
+
+       -  ``EBUSY``
+
+       -  This error code indicates that there are conflicting requests.
+	  There are active filters filtering data from another input source.
+	  Make sure that these filters are stopped before starting this
+	  filter.
+
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-start.rst b/Documentation/userspace-api/media/dvb/dmx-start.rst
new file mode 100644
index 000000000000..a1d35f01fc95
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-start.rst
@@ -0,0 +1,75 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_START:
+
+=========
+DMX_START
+=========
+
+Name
+----
+
+DMX_START
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, DMX_START)
+    :name: DMX_START
+
+
+Arguments
+---------
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
+
+Description
+-----------
+
+This ioctl call is used to start the actual filtering operation defined
+via the ioctl calls :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER`.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  Invalid argument, i.e. no filtering parameters provided via the
+	  :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER` ioctls.
+
+    -  .. row 2
+
+       -  ``EBUSY``
+
+       -  This error code indicates that there are conflicting requests.
+	  There are active filters filtering data from another input source.
+	  Make sure that these filters are stopped before starting this
+	  filter.
+
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx-stop.rst b/Documentation/userspace-api/media/dvb/dmx-stop.rst
new file mode 100644
index 000000000000..5e6e805010d0
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx-stop.rst
@@ -0,0 +1,52 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _DMX_STOP:
+
+========
+DMX_STOP
+========
+
+Name
+----
+
+DMX_STOP
+
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, DMX_STOP)
+    :name: DMX_STOP
+
+
+Arguments
+---------
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-dmx-open>`.
+
+Description
+-----------
+
+This ioctl call is used to stop the actual filtering operation defined
+via the ioctl calls :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER` and
+started via the :ref:`DMX_START` command.
+
+
+Return Value
+------------
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/dmx_fcalls.rst b/Documentation/userspace-api/media/dvb/dmx_fcalls.rst
new file mode 100644
index 000000000000..04e150f00f84
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx_fcalls.rst
@@ -0,0 +1,37 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dmx_fcalls:
+
+********************
+Demux Function Calls
+********************
+
+.. toctree::
+    :maxdepth: 1
+
+    dmx-fopen
+    dmx-fclose
+    dmx-fread
+    dmx-fwrite
+    dmx-mmap
+    dmx-munmap
+    dmx-start
+    dmx-stop
+    dmx-set-filter
+    dmx-set-pes-filter
+    dmx-set-buffer-size
+    dmx-get-stc
+    dmx-get-pes-pids
+    dmx-add-pid
+    dmx-remove-pid
+    dmx-reqbufs
+    dmx-querybuf
+    dmx-expbuf
+    dmx-qbuf
diff --git a/Documentation/userspace-api/media/dvb/dmx_types.rst b/Documentation/userspace-api/media/dvb/dmx_types.rst
new file mode 100644
index 000000000000..635b8fd363be
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dmx_types.rst
@@ -0,0 +1,16 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dmx_types:
+
+****************
+Demux Data Types
+****************
+
+.. kernel-doc:: include/uapi/linux/dvb/dmx.h
diff --git a/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst b/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst
new file mode 100644
index 000000000000..5d6a7735a9d1
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst
@@ -0,0 +1,32 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dvb-fe-read-status:
+
+***************************************
+Querying frontend status and statistics
+***************************************
+
+Once :ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` is called, the
+frontend will run a kernel thread that will periodically check for the
+tuner lock status and provide statistics about the quality of the
+signal.
+
+The information about the frontend tuner locking status can be queried
+using :ref:`FE_READ_STATUS`.
+
+Signal statistics are provided via
+:ref:`FE_GET_PROPERTY`.
+
+.. note::
+
+   Most statistics require the demodulator to be fully locked
+   (e. g. with :c:type:`FE_HAS_LOCK <fe_status>` bit set). See
+   :ref:`Frontend statistics indicators <frontend-stat-properties>` for
+   more details.
diff --git a/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst b/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst
new file mode 100644
index 000000000000..7f5e56cf75cb
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst
@@ -0,0 +1,22 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. c:type:: dvb_frontend_event
+
+***************
+frontend events
+***************
+
+
+.. code-block:: c
+
+     struct dvb_frontend_event {
+	 fe_status_t status;
+	 struct dvb_frontend_parameters parameters;
+     };
diff --git a/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst b/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst
new file mode 100644
index 000000000000..83b1bcc6ef54
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst
@@ -0,0 +1,126 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. c:type:: dvb_frontend_parameters
+
+*******************
+frontend parameters
+*******************
+
+The kind of parameters passed to the frontend device for tuning depend
+on the kind of hardware you are using.
+
+The struct ``dvb_frontend_parameters`` uses a union with specific
+per-system parameters. However, as newer delivery systems required more
+data, the structure size weren't enough to fit, and just extending its
+size would break the existing applications. So, those parameters were
+replaced by the usage of
+:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>`
+ioctl's. The new API is flexible enough to add new parameters to
+existing delivery systems, and to add newer delivery systems.
+
+So, newer applications should use
+:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>`
+instead, in order to be able to support the newer System Delivery like
+DVB-S2, DVB-T2, DVB-C2, ISDB, etc.
+
+All kinds of parameters are combined as a union in the
+``dvb_frontend_parameters`` structure:
+
+
+.. code-block:: c
+
+    struct dvb_frontend_parameters {
+	uint32_t frequency;     /* (absolute) frequency in Hz for QAM/OFDM */
+		    /* intermediate frequency in kHz for QPSK */
+	fe_spectral_inversion_t inversion;
+	union {
+	    struct dvb_qpsk_parameters qpsk;
+	    struct dvb_qam_parameters  qam;
+	    struct dvb_ofdm_parameters ofdm;
+	    struct dvb_vsb_parameters  vsb;
+	} u;
+    };
+
+In the case of QPSK frontends the ``frequency`` field specifies the
+intermediate frequency, i.e. the offset which is effectively added to
+the local oscillator frequency (LOF) of the LNB. The intermediate
+frequency has to be specified in units of kHz. For QAM and OFDM
+frontends the ``frequency`` specifies the absolute frequency and is
+given in Hz.
+
+
+.. c:type:: dvb_qpsk_parameters
+
+QPSK parameters
+===============
+
+For satellite QPSK frontends you have to use the ``dvb_qpsk_parameters``
+structure:
+
+
+.. code-block:: c
+
+     struct dvb_qpsk_parameters {
+	 uint32_t        symbol_rate;  /* symbol rate in Symbols per second */
+	 fe_code_rate_t  fec_inner;    /* forward error correction (see above) */
+     };
+
+
+.. c:type:: dvb_qam_parameters
+
+QAM parameters
+==============
+
+for cable QAM frontend you use the ``dvb_qam_parameters`` structure:
+
+
+.. code-block:: c
+
+     struct dvb_qam_parameters {
+	 uint32_t         symbol_rate; /* symbol rate in Symbols per second */
+	 fe_code_rate_t   fec_inner;   /* forward error correction (see above) */
+	 fe_modulation_t  modulation;  /* modulation type (see above) */
+     };
+
+
+.. c:type:: dvb_vsb_parameters
+
+VSB parameters
+==============
+
+ATSC frontends are supported by the ``dvb_vsb_parameters`` structure:
+
+
+.. code-block:: c
+
+    struct dvb_vsb_parameters {
+	fe_modulation_t modulation; /* modulation type (see above) */
+    };
+
+
+.. c:type:: dvb_ofdm_parameters
+
+OFDM parameters
+===============
+
+DVB-T frontends are supported by the ``dvb_ofdm_parameters`` structure:
+
+
+.. code-block:: c
+
+     struct dvb_ofdm_parameters {
+	 fe_bandwidth_t      bandwidth;
+	 fe_code_rate_t      code_rate_HP;  /* high priority stream code rate */
+	 fe_code_rate_t      code_rate_LP;  /* low priority stream code rate */
+	 fe_modulation_t     constellation; /* modulation type (see above) */
+	 fe_transmit_mode_t  transmission_mode;
+	 fe_guard_interval_t guard_interval;
+	 fe_hierarchy_t      hierarchy_information;
+     };
diff --git a/Documentation/userspace-api/media/dvb/dvbapi.rst b/Documentation/userspace-api/media/dvb/dvbapi.rst
new file mode 100644
index 000000000000..74b16ab3fd94
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dvbapi.rst
@@ -0,0 +1,126 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. include:: <isonum.txt>
+
+.. _dvbapi:
+
+########################
+Part II - Digital TV API
+########################
+
+.. note::
+
+   This API is also known as Linux **DVB API**.
+
+   It it was originally written to support the European digital TV
+   standard (DVB), and later extended to support all digital TV standards.
+
+   In order to avoid confusion, within this document, it was opted to refer to
+   it, and to associated hardware as **Digital TV**.
+
+   The word **DVB** is reserved to be used for:
+
+     - the Digital TV API version
+       (e. g. DVB API version 3 or DVB API version 5);
+     - digital TV data types (enums, structs, defines, etc);
+     - digital TV device nodes (``/dev/dvb/...``);
+     - the European DVB standard.
+
+**Version 5.10**
+
+.. only:: html
+
+   .. class:: toc-title
+
+        Table of Contents
+
+.. toctree::
+    :maxdepth: 5
+    :numbered:
+
+    intro
+    frontend
+    demux
+    ca
+    net
+    legacy_dvb_apis
+    examples
+    headers
+
+
+**********************
+Revision and Copyright
+**********************
+
+Authors:
+
+- J. K. Metzler, Ralph <rjkm@metzlerbros.de>
+
+ - Original author of the Digital TV API documentation.
+
+- O. C. Metzler, Marcus <rjkm@metzlerbros.de>
+
+ - Original author of the Digital TV API documentation.
+
+- Carvalho Chehab, Mauro <mchehab+samsung@kernel.org>
+
+ - Ported document to Docbook XML, addition of DVBv5 API, documentation gaps fix.
+
+**Copyright** |copy| 2002-2003 : Convergence GmbH
+
+**Copyright** |copy| 2009-2017 : Mauro Carvalho Chehab
+
+****************
+Revision History
+****************
+
+:revision: 2.2.0 / 2017-09-01 (*mcc*)
+
+Most gaps between the uAPI document and the Kernel implementation
+got fixed for the non-legacy API.
+
+:revision: 2.1.0 / 2015-05-29 (*mcc*)
+
+DocBook improvements and cleanups, in order to document the system calls
+on a more standard way and provide more description about the current
+Digital TV API.
+
+:revision: 2.0.4 / 2011-05-06 (*mcc*)
+
+Add more information about DVBv5 API, better describing the frontend
+GET/SET props ioctl's.
+
+
+:revision: 2.0.3 / 2010-07-03 (*mcc*)
+
+Add some frontend capabilities flags, present on kernel, but missing at
+the specs.
+
+
+:revision: 2.0.2 / 2009-10-25 (*mcc*)
+
+documents FE_SET_FRONTEND_TUNE_MODE and
+FE_DISHETWORK_SEND_LEGACY_CMD ioctls.
+
+
+:revision: 2.0.1 / 2009-09-16 (*mcc*)
+
+Added ISDB-T test originally written by Patrick Boettcher
+
+
+:revision: 2.0.0 / 2009-09-06 (*mcc*)
+
+Conversion from LaTex to DocBook XML. The contents is the same as the
+original LaTex version.
+
+
+:revision: 1.0.0 / 2003-07-24 (*rjkm*)
+
+Initial revision on LaTEX.
diff --git a/Documentation/userspace-api/media/dvb/dvbproperty.rst b/Documentation/userspace-api/media/dvb/dvbproperty.rst
new file mode 100644
index 000000000000..1716733d24ba
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dvbproperty.rst
@@ -0,0 +1,133 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend-properties:
+
+**************
+Property types
+**************
+
+Tuning into a Digital TV physical channel and starting decoding it
+requires changing a set of parameters, in order to control the tuner,
+the demodulator, the Linear Low-noise Amplifier (LNA) and to set the
+antenna subsystem via Satellite Equipment Control - SEC (on satellite
+systems). The actual parameters are specific to each particular digital
+TV standards, and may change as the digital TV specs evolves.
+
+In the past (up to DVB API version 3 - DVBv3), the strategy used was to have a
+union with the parameters needed to tune for DVB-S, DVB-C, DVB-T and
+ATSC delivery systems grouped there. The problem is that, as the second
+generation standards appeared, the size of such union was not big
+enough to group the structs that would be required for those new
+standards. Also, extending it would break userspace.
+
+So, the legacy union/struct based approach was deprecated, in favor
+of a properties set approach. On such approach,
+:ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>` are used
+to setup the frontend and read its status.
+
+The actual action is determined by a set of dtv_property cmd/data pairs.
+With one single ioctl, is possible to get/set up to 64 properties.
+
+This section describes the new and recommended way to set the frontend,
+with supports all digital TV delivery systems.
+
+.. note::
+
+   1. On Linux DVB API version 3, setting a frontend was done via
+      struct :c:type:`dvb_frontend_parameters`.
+
+   2. Don't use DVB API version 3 calls on hardware with supports
+      newer standards. Such API provides no support or a very limited
+      support to new standards and/or new hardware.
+
+   3. Nowadays, most frontends support multiple delivery systems.
+      Only with DVB API version 5 calls it is possible to switch between
+      the multiple delivery systems supported by a frontend.
+
+   4. DVB API version 5 is also called *S2API*, as the first
+      new standard added to it was DVB-S2.
+
+**Example**: in order to set the hardware to tune into a DVB-C channel
+at 651 kHz, modulated with 256-QAM, FEC 3/4 and symbol rate of 5.217
+Mbauds, those properties should be sent to
+:ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` ioctl:
+
+  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` = SYS_DVBC_ANNEX_A
+
+  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` = 651000000
+
+  :ref:`DTV_MODULATION <DTV-MODULATION>` = QAM_256
+
+  :ref:`DTV_INVERSION <DTV-INVERSION>` = INVERSION_AUTO
+
+  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>` = 5217000
+
+  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` = FEC_3_4
+
+  :ref:`DTV_TUNE <DTV-TUNE>`
+
+The code that would that would do the above is show in
+:ref:`dtv-prop-example`.
+
+.. code-block:: c
+    :caption: Example: Setting digital TV frontend properties
+    :name: dtv-prop-example
+
+    #include <stdio.h>
+    #include <fcntl.h>
+    #include <sys/ioctl.h>
+    #include <linux/dvb/frontend.h>
+
+    static struct dtv_property props[] = {
+	{ .cmd = DTV_DELIVERY_SYSTEM, .u.data = SYS_DVBC_ANNEX_A },
+	{ .cmd = DTV_FREQUENCY,       .u.data = 651000000 },
+	{ .cmd = DTV_MODULATION,      .u.data = QAM_256 },
+	{ .cmd = DTV_INVERSION,       .u.data = INVERSION_AUTO },
+	{ .cmd = DTV_SYMBOL_RATE,     .u.data = 5217000 },
+	{ .cmd = DTV_INNER_FEC,       .u.data = FEC_3_4 },
+	{ .cmd = DTV_TUNE }
+    };
+
+    static struct dtv_properties dtv_prop = {
+	.num = 6, .props = props
+    };
+
+    int main(void)
+    {
+	int fd = open("/dev/dvb/adapter0/frontend0", O_RDWR);
+
+	if (!fd) {
+	    perror ("open");
+	    return -1;
+	}
+	if (ioctl(fd, FE_SET_PROPERTY, &dtv_prop) == -1) {
+	    perror("ioctl");
+	    return -1;
+	}
+	printf("Frontend set\\n");
+	return 0;
+    }
+
+.. attention:: While it is possible to directly call the Kernel code like the
+   above example, it is strongly recommended to use
+   `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__, as it
+   provides abstraction to work with the supported digital TV standards and
+   provides methods for usual operations like program scanning and to
+   read/write channel descriptor files.
+
+.. toctree::
+    :maxdepth: 1
+
+    fe_property_parameters
+    frontend-stat-properties
+    frontend-property-terrestrial-systems
+    frontend-property-cable-systems
+    frontend-property-satellite-systems
+    frontend-header
diff --git a/Documentation/userspace-api/media/dvb/dvbstb.svg b/Documentation/userspace-api/media/dvb/dvbstb.svg
new file mode 100644
index 000000000000..b333d0ff944f
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/dvbstb.svg
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+    This file is dual-licensed: you can use it either under the terms
+    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+    dual licensing only applies to this file, and not this project as a
+    whole.
+
+    a) This file is free software; you can redistribute it and/or
+       modify it under the terms of the GNU General Public License as
+       published by the Free Software Foundation version 2 of
+       the License.
+
+       This file is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+       GNU General Public License for more details.
+
+    Or, alternatively,
+
+    b) Permission is granted to copy, distribute and/or modify this
+       document under the terms of the GNU Free Documentation License,
+       Version 1.1 or any later version published by the Free Software
+       Foundation, with no Invariant Sections, no Front-Cover Texts
+       and no Back-Cover Texts. A copy of the license is included at
+       Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg id="svg2" width="15.847cm" height="8.4187cm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 23770.123 12628.122" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><defs id="defs142"><marker id="Arrow1Lend" overflow="visible" orient="auto"><path id="path954" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker><marker id="marker1243" overflow="visible" orient="auto"><path id="path1241" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker></defs><metadata id="metadata519"><rdf:RDF><cc:Work
+rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><rect id="rect197" class="BoundingBox" x="5355.1" y="13.122" width="18403" height="9603" fill="none"/><path id="path199" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="#fff"/><path id="path201" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="none" stroke="#000"/><rect id="rect206" class="BoundingBox" x="13.122" y="4013.1" width="4544" height="2403" fill="none"/><path id="path208" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path210" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text212" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition"
+x="1281.1219" y="5435.1221"><tspan id="tspan218" fill="#000000">Antena</tspan></tspan></tspan></text>
+<rect id="rect223" class="BoundingBox" x="6213.1" y="1813.1" width="4544" height="2403" fill="none"/><path id="path225" d="m8485.1 4214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path227" d="m8485.1 4214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text229" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan231" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan233" class="TextPosition" x="7217.1221" y="3235.1221"><tspan id="tspan235" fill="#000000">Frontend</tspan></tspan></tspan></text>
+<rect id="rect240" class="BoundingBox" x="12113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path242" d="m14385 4214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path244" d="m14385 4214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text246" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan248" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan250" class="TextPosition" x="13944.122" y="3235.1221"><tspan id="tspan252" fill="#000000">CA</tspan></tspan></tspan></text>
+<rect id="rect257" class="BoundingBox" x="18113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path259" d="m20385 4214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path261" d="m20385 4214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text263" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan265" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan267" class="TextPosition" x="19384.123" y="3235.1221"><tspan id="tspan269" fill="#000000">Demux</tspan></tspan></tspan></text>
+<rect id="rect274" class="BoundingBox" x="6113.1" y="5813.1" width="4544" height="2403" fill="none"/><path id="path276" d="m8385.1 8214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path278" d="m8385.1 8214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text280" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan282" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan284" class="TextPosition" x="7733.1221" y="7235.1221"><tspan id="tspan286" fill="#000000">SEC</tspan></tspan></tspan></text>
+<rect id="rect291" class="BoundingBox" x="12213" y="5813.1" width="4544" height="2403" fill="none"/><path id="path293" d="m14485 8214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path295" d="m14485 8214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><text id="text297" class="TextShape" x="-2443.8779" y="-4903.3779"><tspan id="tspan299" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan301" class="TextPosition" x="13676.122" y="6917.6221"><tspan id="tspan303" fill="#000000">Audio</tspan></tspan></tspan></text>
+<rect id="rect308" class="BoundingBox" x="18113" y="5813.1" width="4544" height="2403" fill="none"/><path id="path310" d="m20385 8214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path312" d="m20385 8214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><text id="text314" class="TextShape" x="-2443.8779" y="-4903.3779"><tspan id="tspan316" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan318" class="TextPosition" x="19583.123" y="6917.6221"><tspan id="tspan320" fill="#000000">Video</tspan></tspan></tspan></text>
+<rect id="rect325" class="BoundingBox" x="15213" y="10213" width="4544" height="2403" fill="none"/><path id="path327" d="m17485 12614h-2271v-2400h4541v2400z" fill="#fff"/><path id="path329" d="m17485 12614h-2271v-2400h4541v2400z" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><text id="text331" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan333" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan335" class="TextPosition" x="17076.123" y="11635.122"><tspan id="tspan337" fill="#000000">TV</tspan></tspan></tspan></text>
+<rect id="rect342" class="BoundingBox" x="4555.1" y="3014.1" width="1661" height="2202" fill="none"/><path id="path344" d="m4556.1 5214.1 1400-1857" fill="none" stroke="#000"/><path id="path346" d="m6215.1 3014.1-391 269 240 181z"/><rect id="rect351" class="BoundingBox" x="4555.1" y="5213.1" width="1561" height="1802" fill="none"/><path id="path353" d="m4556.1 5214.1 1277 1475" fill="none" stroke="#000"/><path id="path355" d="m6115.1 7014.1-181-438-227 196z"/><rect id="rect360" class="BoundingBox" x="10755" y="2864.1" width="1361" height="301" fill="none"/><path id="path362" d="m10756 3014.1h929" fill="none" stroke="#000"/><path id="path364" d="m12115 3014.1-450-150v300z"/><rect id="rect369" class="BoundingBox" x="16655" y="2864.1" width="1461" height="301" fill="none"/><path id="path371" d="m16656 3014.1h1029" fill="none" stroke="#000"/><path id="path373" d="m18115
+3014.1-450-150v300z"/><rect id="rect378" class="BoundingBox" x="20235" y="4213.1" width="301" height="1602" fill="none"/><rect id="rect387" class="BoundingBox" x="17485" y="8213.1" width="2902" height="2002" fill="none"/><path id="path389" d="m20385 8214.1-2546 1756" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><path id="path391" d="m17485 10214 456-132-171-247z"/><rect id="rect396" class="BoundingBox" x="14484" y="8213.1" width="3002" height="2002" fill="none"/><path id="path398" d="m14485 8214.1 2642 1761" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><path id="path400" d="m17485 10214-291-374-167 249z"/><rect id="rect405" class="BoundingBox" x="14485" y="4213.1" width="5902" height="1629" fill="none"/><path id="path949" d="m20387 4213.1v1629" fill="none" marker-end="url(#Arrow1Lend)"
+stroke="#000" stroke-dasharray="26.45879596, 52.91759192999999328" stroke-linejoin="miter" stroke-width="26.459"/><path id="path1233" d="m20385 4214.1-3628 1599" fill="none" marker-end="url(#marker1243)" stroke="#000" stroke-dasharray="26.45879596, 52.91759193" stroke-linejoin="miter" stroke-width="26.459"/><text id="text297-3" class="TextShape" x="-2911.9202" y="-4257.2061" font-size="12px" stroke-width="1"><tspan id="tspan299-6" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400" stroke-width="1"><tspan id="tspan301-7" class="TextPosition" x="13208.079" y="7563.793" stroke-width="1"><tspan id="tspan303-5" fill="#000000" stroke-width="1">Decoder</tspan></tspan></tspan></text>
+<text id="text297-3-3" class="TextShape" x="2950.9287" y="-4259.5928" font-size="12px" stroke-width="1"><tspan id="tspan299-6-5" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400" stroke-width="1"><tspan id="tspan301-7-6" class="TextPosition" x="19070.928" y="7561.4053" stroke-width="1"><tspan id="tspan303-5-2" fill="#000000" stroke-width="1">Decoder</tspan></tspan></tspan></text>
+</svg>
diff --git a/Documentation/userspace-api/media/dvb/examples.rst b/Documentation/userspace-api/media/dvb/examples.rst
new file mode 100644
index 000000000000..bd0adde86b96
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/examples.rst
@@ -0,0 +1,23 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dvb_examples:
+
+********
+Examples
+********
+
+In the past, we used to have a set of examples here. However, those
+examples got out of date and doesn't even compile nowadays.
+
+Also, nowadays, the best is to use the libdvbv5 DVB API nowadays,
+with is fully documented.
+
+Please refer to the `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__
+for updated/recommended examples.
diff --git a/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst b/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst
new file mode 100644
index 000000000000..6293287af67c
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst
@@ -0,0 +1,81 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+******************
+Frontend bandwidth
+******************
+
+.. c:type:: fe_bandwidth
+
+.. flat-table:: enum fe_bandwidth
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _BANDWIDTH-AUTO:
+
+	  ``BANDWIDTH_AUTO``
+
+       -  Autodetect bandwidth (if supported)
+
+    -  .. row 3
+
+       -  .. _BANDWIDTH-1-712-MHZ:
+
+	  ``BANDWIDTH_1_712_MHZ``
+
+       -  1.712 MHz
+
+    -  .. row 4
+
+       -  .. _BANDWIDTH-5-MHZ:
+
+	  ``BANDWIDTH_5_MHZ``
+
+       -  5 MHz
+
+    -  .. row 5
+
+       -  .. _BANDWIDTH-6-MHZ:
+
+	  ``BANDWIDTH_6_MHZ``
+
+       -  6 MHz
+
+    -  .. row 6
+
+       -  .. _BANDWIDTH-7-MHZ:
+
+	  ``BANDWIDTH_7_MHZ``
+
+       -  7 MHz
+
+    -  .. row 7
+
+       -  .. _BANDWIDTH-8-MHZ:
+
+	  ``BANDWIDTH_8_MHZ``
+
+       -  8 MHz
+
+    -  .. row 8
+
+       -  .. _BANDWIDTH-10-MHZ:
+
+	  ``BANDWIDTH_10_MHZ``
+
+       -  10 MHz
diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst
new file mode 100644
index 000000000000..b520974e8c46
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst
@@ -0,0 +1,55 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_DISEQC_RECV_SLAVE_REPLY:
+
+********************************
+ioctl FE_DISEQC_RECV_SLAVE_REPLY
+********************************
+
+Name
+====
+
+FE_DISEQC_RECV_SLAVE_REPLY - Receives reply from a DiSEqC 2.0 command
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_DISEQC_RECV_SLAVE_REPLY, struct dvb_diseqc_slave_reply *argp )
+    :name: FE_DISEQC_RECV_SLAVE_REPLY
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``argp``
+    pointer to struct :c:type:`dvb_diseqc_slave_reply`.
+
+
+Description
+===========
+
+Receives reply from a DiSEqC 2.0 command.
+
+The received message is stored at the buffer pointed by ``argp``.
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst
new file mode 100644
index 000000000000..c59af46b8e87
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst
@@ -0,0 +1,53 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_DISEQC_RESET_OVERLOAD:
+
+******************************
+ioctl FE_DISEQC_RESET_OVERLOAD
+******************************
+
+Name
+====
+
+FE_DISEQC_RESET_OVERLOAD - Restores the power to the antenna subsystem, if it was powered off due - to power overload.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_DISEQC_RESET_OVERLOAD, NULL )
+    :name: FE_DISEQC_RESET_OVERLOAD
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+Description
+===========
+
+If the bus has been automatically powered off due to power overload,
+this ioctl call restores the power to the bus. The call requires
+read/write access to the device. This call has no effect if the device
+is manually powered off. Not all Digital TV adapters support this ioctl.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst
new file mode 100644
index 000000000000..19b51d0550f7
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst
@@ -0,0 +1,59 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_DISEQC_SEND_BURST:
+
+**************************
+ioctl FE_DISEQC_SEND_BURST
+**************************
+
+Name
+====
+
+FE_DISEQC_SEND_BURST - Sends a 22KHz tone burst for 2x1 mini DiSEqC satellite selection.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_DISEQC_SEND_BURST, enum fe_sec_mini_cmd tone )
+    :name: FE_DISEQC_SEND_BURST
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``tone``
+    An integer enumered value described at :c:type:`fe_sec_mini_cmd`.
+
+
+Description
+===========
+
+This ioctl is used to set the generation of a 22kHz tone burst for mini
+DiSEqC satellite selection for 2x1 switches. This call requires
+read/write permissions.
+
+It provides support for what's specified at
+`Digital Satellite Equipment Control (DiSEqC) - Simple "ToneBurst" Detection Circuit specification. <http://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/simple_tone_burst_detec.pdf>`__
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst
new file mode 100644
index 000000000000..f75513d018c8
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst
@@ -0,0 +1,56 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_DISEQC_SEND_MASTER_CMD:
+
+*******************************
+ioctl FE_DISEQC_SEND_MASTER_CMD
+*******************************
+
+Name
+====
+
+FE_DISEQC_SEND_MASTER_CMD - Sends a DiSEqC command
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_DISEQC_SEND_MASTER_CMD, struct dvb_diseqc_master_cmd *argp )
+    :name: FE_DISEQC_SEND_MASTER_CMD
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``argp``
+    pointer to struct
+    :c:type:`dvb_diseqc_master_cmd`
+
+
+Description
+===========
+
+Sends the DiSEqC command pointed by :c:type:`dvb_diseqc_master_cmd`
+to the antenna subsystem.
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
diff --git a/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst
new file mode 100644
index 000000000000..ea66f72fe5f8
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst
@@ -0,0 +1,62 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_DISHNETWORK_SEND_LEGACY_CMD:
+
+******************************
+FE_DISHNETWORK_SEND_LEGACY_CMD
+******************************
+
+Name
+====
+
+FE_DISHNETWORK_SEND_LEGACY_CMD
+
+
+Synopsis
+========
+
+.. c:function:: int  ioctl(int fd, FE_DISHNETWORK_SEND_LEGACY_CMD, unsigned long cmd)
+    :name: FE_DISHNETWORK_SEND_LEGACY_CMD
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
+
+``cmd``
+    Sends the specified raw cmd to the dish via DISEqC.
+
+
+Description
+===========
+
+.. warning::
+   This is a very obscure legacy command, used only at stv0299
+   driver. Should not be used on newer drivers.
+
+It provides a non-standard method for selecting Diseqc voltage on the
+frontend, for Dish Network legacy switches.
+
+As support for this ioctl were added in 2004, this means that such
+dishes were already legacy in 2004.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst
new file mode 100644
index 000000000000..9bdf1e898ddc
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst
@@ -0,0 +1,61 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_ENABLE_HIGH_LNB_VOLTAGE:
+
+********************************
+ioctl FE_ENABLE_HIGH_LNB_VOLTAGE
+********************************
+
+Name
+====
+
+FE_ENABLE_HIGH_LNB_VOLTAGE - Select output DC level between normal LNBf voltages or higher LNBf - voltages.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_ENABLE_HIGH_LNB_VOLTAGE, unsigned int high )
+    :name: FE_ENABLE_HIGH_LNB_VOLTAGE
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``high``
+    Valid flags:
+
+    -  0 - normal 13V and 18V.
+
+    -  >0 - enables slightly higher voltages instead of 13/18V, in order
+       to compensate for long antenna cables.
+
+
+Description
+===========
+
+Select output DC level between normal LNBf voltages or higher LNBf
+voltages between 0 (normal) or a value grater than 0 for higher
+voltages.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-get-event.rst b/Documentation/userspace-api/media/dvb/fe-get-event.rst
new file mode 100644
index 000000000000..19df41dca238
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-get-event.rst
@@ -0,0 +1,78 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_GET_EVENT:
+
+************
+FE_GET_EVENT
+************
+
+Name
+====
+
+FE_GET_EVENT
+
+.. attention:: This ioctl is deprecated.
+
+
+Synopsis
+========
+
+.. c:function:: int  ioctl(int fd, FE_GET_EVENT, struct dvb_frontend_event *ev)
+    :name: FE_GET_EVENT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
+
+``ev``
+    Points to the location where the event, if any, is to be stored.
+
+
+Description
+===========
+
+This ioctl call returns a frontend event if available. If an event is
+not available, the behavior depends on whether the device is in blocking
+or non-blocking mode. In the latter case, the call fails immediately
+with errno set to ``EWOULDBLOCK``. In the former case, the call blocks until
+an event becomes available.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EWOULDBLOCK``
+
+       -  There is no event pending, and the device is in non-blocking mode.
+
+    -  .. row 2
+
+       -  ``EOVERFLOW``
+
+       -  Overflow in event queue - one or more events were lost.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-get-frontend.rst b/Documentation/userspace-api/media/dvb/fe-get-frontend.rst
new file mode 100644
index 000000000000..7968adc8e982
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-get-frontend.rst
@@ -0,0 +1,69 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_GET_FRONTEND:
+
+***************
+FE_GET_FRONTEND
+***************
+
+Name
+====
+
+FE_GET_FRONTEND
+
+.. attention:: This ioctl is deprecated.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl(int fd, FE_GET_FRONTEND, struct dvb_frontend_parameters *p)
+    :name: FE_GET_FRONTEND
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
+
+
+``p``
+    Points to parameters for tuning operation.
+
+
+Description
+===========
+
+This ioctl call queries the currently effective frontend parameters. For
+this command, read-only access to the device is sufficient.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  Maximum supported symbol rate reached.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-get-info.rst b/Documentation/userspace-api/media/dvb/fe-get-info.rst
new file mode 100644
index 000000000000..80d9f8195ac4
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-get-info.rst
@@ -0,0 +1,70 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_GET_INFO:
+
+*****************
+ioctl FE_GET_INFO
+*****************
+
+Name
+====
+
+FE_GET_INFO - Query Digital TV frontend capabilities and returns information
+about the - front-end. This call only requires read-only access to the device.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_GET_INFO, struct dvb_frontend_info *argp )
+    :name: FE_GET_INFO
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``argp``
+    pointer to struct struct
+    :c:type:`dvb_frontend_info`
+
+
+Description
+===========
+
+All Digital TV frontend devices support the :ref:`FE_GET_INFO` ioctl. It is
+used to identify kernel devices compatible with this specification and to
+obtain information about driver and hardware capabilities. The ioctl
+takes a pointer to dvb_frontend_info which is filled by the driver.
+When the driver is not compatible with this specification the ioctl
+returns an error.
+
+
+frontend capabilities
+=====================
+
+Capabilities describe what a frontend can do. Some capabilities are
+supported only on some specific frontend types.
+
+The frontend capabilities are described at :c:type:`fe_caps`.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-get-property.rst b/Documentation/userspace-api/media/dvb/fe-get-property.rst
new file mode 100644
index 000000000000..088d4e319405
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-get-property.rst
@@ -0,0 +1,83 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_GET_PROPERTY:
+
+**************************************
+ioctl FE_SET_PROPERTY, FE_GET_PROPERTY
+**************************************
+
+Name
+====
+
+FE_SET_PROPERTY - FE_GET_PROPERTY - FE_SET_PROPERTY sets one or more frontend properties. - FE_GET_PROPERTY returns one or more frontend properties.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_GET_PROPERTY, struct dtv_properties *argp )
+    :name: FE_GET_PROPERTY
+
+.. c:function:: int ioctl( int fd, FE_SET_PROPERTY, struct dtv_properties *argp )
+    :name: FE_SET_PROPERTY
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``argp``
+    Pointer to struct :c:type:`dtv_properties`.
+
+
+Description
+===========
+
+All Digital TV frontend devices support the ``FE_SET_PROPERTY`` and
+``FE_GET_PROPERTY`` ioctls. The supported properties and statistics
+depends on the delivery system and on the device:
+
+-  ``FE_SET_PROPERTY:``
+
+   -  This ioctl is used to set one or more frontend properties.
+
+   -  This is the basic command to request the frontend to tune into
+      some frequency and to start decoding the digital TV signal.
+
+   -  This call requires read/write access to the device.
+
+.. note::
+
+   At return, the values aren't updated to reflect the actual
+   parameters used. If the actual parameters are needed, an explicit
+   call to ``FE_GET_PROPERTY`` is needed.
+
+-  ``FE_GET_PROPERTY:``
+
+   -  This ioctl is used to get properties and statistics from the
+      frontend.
+
+   -  No properties are changed, and statistics aren't reset.
+
+   -  This call only requires read-only access to the device.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-read-ber.rst b/Documentation/userspace-api/media/dvb/fe-read-ber.rst
new file mode 100644
index 000000000000..d0a706ac9011
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-read-ber.rst
@@ -0,0 +1,57 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_READ_BER:
+
+***********
+FE_READ_BER
+***********
+
+Name
+====
+
+FE_READ_BER
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+========
+
+.. c:function:: int  ioctl(int fd, FE_READ_BER, uint32_t *ber)
+    :name: FE_READ_BER
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
+
+``ber``
+    The bit error rate is stored into \*ber.
+
+
+Description
+===========
+
+This ioctl call returns the bit error rate for the signal currently
+received/demodulated by the front-end. For this command, read-only
+access to the device is sufficient.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst b/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst
new file mode 100644
index 000000000000..df79837de47d
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst
@@ -0,0 +1,57 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_READ_SIGNAL_STRENGTH:
+
+***********************
+FE_READ_SIGNAL_STRENGTH
+***********************
+
+Name
+====
+
+FE_READ_SIGNAL_STRENGTH
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_READ_SIGNAL_STRENGTH, uint16_t *strength)
+    :name: FE_READ_SIGNAL_STRENGTH
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
+
+``strength``
+    The signal strength value is stored into \*strength.
+
+
+Description
+===========
+
+This ioctl call returns the signal strength value for the signal
+currently received by the front-end. For this command, read-only access
+to the device is sufficient.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-read-snr.rst b/Documentation/userspace-api/media/dvb/fe-read-snr.rst
new file mode 100644
index 000000000000..e56147a40e23
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-read-snr.rst
@@ -0,0 +1,57 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_READ_SNR:
+
+***********
+FE_READ_SNR
+***********
+
+Name
+====
+
+FE_READ_SNR
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+========
+
+.. c:function:: int  ioctl(int fd, FE_READ_SNR, int16_t *snr)
+    :name: FE_READ_SNR
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
+
+``snr``
+    The signal-to-noise ratio is stored into \*snr.
+
+
+Description
+===========
+
+This ioctl call returns the signal-to-noise ratio for the signal
+currently received by the front-end. For this command, read-only access
+to the device is sufficient.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-read-status.rst b/Documentation/userspace-api/media/dvb/fe-read-status.rst
new file mode 100644
index 000000000000..cf781d463a20
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-read-status.rst
@@ -0,0 +1,72 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_READ_STATUS:
+
+********************
+ioctl FE_READ_STATUS
+********************
+
+Name
+====
+
+FE_READ_STATUS - Returns status information about the front-end. This call only requires - read-only access to the device
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_READ_STATUS, unsigned int *status )
+    :name: FE_READ_STATUS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``status``
+    pointer to a bitmask integer filled with the values defined by enum
+    :c:type:`fe_status`.
+
+
+Description
+===========
+
+All Digital TV frontend devices support the ``FE_READ_STATUS`` ioctl. It is
+used to check about the locking status of the frontend after being
+tuned. The ioctl takes a pointer to an integer where the status will be
+written.
+
+.. note::
+
+   The size of status is actually sizeof(enum fe_status), with
+   varies according with the architecture. This needs to be fixed in the
+   future.
+
+
+int fe_status
+=============
+
+The fe_status parameter is used to indicate the current state and/or
+state changes of the frontend hardware. It is produced using the enum
+:c:type:`fe_status` values on a bitmask
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst b/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst
new file mode 100644
index 000000000000..d042e8c86930
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst
@@ -0,0 +1,59 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_READ_UNCORRECTED_BLOCKS:
+
+**************************
+FE_READ_UNCORRECTED_BLOCKS
+**************************
+
+Name
+====
+
+FE_READ_UNCORRECTED_BLOCKS
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_READ_UNCORRECTED_BLOCKS, uint32_t *ublocks)
+    :name: FE_READ_UNCORRECTED_BLOCKS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
+
+``ublocks``
+    The total number of uncorrected blocks seen by the driver so far.
+
+
+Description
+===========
+
+This ioctl call returns the number of uncorrected blocks detected by the
+device driver during its lifetime. For meaningful measurements, the
+increment in block count during a specific time interval should be
+calculated. For this command, read-only access to the device is
+sufficient.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst b/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst
new file mode 100644
index 000000000000..8e059967f49c
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst
@@ -0,0 +1,64 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_SET_FRONTEND_TUNE_MODE:
+
+*******************************
+ioctl FE_SET_FRONTEND_TUNE_MODE
+*******************************
+
+Name
+====
+
+FE_SET_FRONTEND_TUNE_MODE - Allow setting tuner mode flags to the frontend.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_SET_FRONTEND_TUNE_MODE, unsigned int flags )
+    :name: FE_SET_FRONTEND_TUNE_MODE
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``flags``
+    Valid flags:
+
+    -  0 - normal tune mode
+
+    -  ``FE_TUNE_MODE_ONESHOT`` - When set, this flag will disable any
+       zigzagging or other "normal" tuning behaviour. Additionally,
+       there will be no automatic monitoring of the lock status, and
+       hence no frontend events will be generated. If a frontend device
+       is closed, this flag will be automatically turned off when the
+       device is reopened read-write.
+
+
+Description
+===========
+
+Allow setting tuner mode flags to the frontend, between 0 (normal) or
+``FE_TUNE_MODE_ONESHOT`` mode
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-set-frontend.rst b/Documentation/userspace-api/media/dvb/fe-set-frontend.rst
new file mode 100644
index 000000000000..960c95cb18a0
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-set-frontend.rst
@@ -0,0 +1,78 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_SET_FRONTEND:
+
+***************
+FE_SET_FRONTEND
+***************
+
+.. attention:: This ioctl is deprecated.
+
+Name
+====
+
+FE_SET_FRONTEND
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl(int fd, FE_SET_FRONTEND, struct dvb_frontend_parameters *p)
+    :name: FE_SET_FRONTEND
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
+
+``p``
+    Points to parameters for tuning operation.
+
+
+Description
+===========
+
+This ioctl call starts a tuning operation using specified parameters.
+The result of this call will be successful if the parameters were valid
+and the tuning could be initiated. The result of the tuning operation in
+itself, however, will arrive asynchronously as an event (see
+documentation for :ref:`FE_GET_EVENT` and
+FrontendEvent.) If a new :ref:`FE_SET_FRONTEND`
+operation is initiated before the previous one was completed, the
+previous operation will be aborted in favor of the new one. This command
+requires read/write access to the device.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  Maximum supported symbol rate reached.
+
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-set-tone.rst b/Documentation/userspace-api/media/dvb/fe-set-tone.rst
new file mode 100644
index 000000000000..5726a20c7991
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-set-tone.rst
@@ -0,0 +1,65 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_SET_TONE:
+
+*****************
+ioctl FE_SET_TONE
+*****************
+
+Name
+====
+
+FE_SET_TONE - Sets/resets the generation of the continuous 22kHz tone.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_SET_TONE, enum fe_sec_tone_mode tone )
+    :name: FE_SET_TONE
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``tone``
+    an integer enumered value described at :c:type:`fe_sec_tone_mode`
+
+
+Description
+===========
+
+This ioctl is used to set the generation of the continuous 22kHz tone.
+This call requires read/write permissions.
+
+Usually, satellite antenna subsystems require that the digital TV device
+to send a 22kHz tone in order to select between high/low band on some
+dual-band LNBf. It is also used to send signals to DiSEqC equipment, but
+this is done using the DiSEqC ioctls.
+
+.. attention:: If more than one device is connected to the same antenna,
+   setting a tone may interfere on other devices, as they may lose the
+   capability of selecting the band. So, it is recommended that applications
+   would change to SEC_TONE_OFF when the device is not used.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-set-voltage.rst b/Documentation/userspace-api/media/dvb/fe-set-voltage.rst
new file mode 100644
index 000000000000..f3191808f4fd
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-set-voltage.rst
@@ -0,0 +1,69 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _FE_SET_VOLTAGE:
+
+********************
+ioctl FE_SET_VOLTAGE
+********************
+
+Name
+====
+
+FE_SET_VOLTAGE - Allow setting the DC level sent to the antenna subsystem.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, FE_SET_VOLTAGE, enum fe_sec_voltage voltage )
+    :name: FE_SET_VOLTAGE
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``voltage``
+    an integer enumered value described at :c:type:`fe_sec_voltage`
+
+
+Description
+===========
+
+This ioctl allows to set the DC voltage level sent through the antenna
+cable to 13V, 18V or off.
+
+Usually, a satellite antenna subsystems require that the digital TV
+device to send a DC voltage to feed power to the LNBf. Depending on the
+LNBf type, the polarization or the intermediate frequency (IF) of the
+LNBf can controlled by the voltage level. Other devices (for example,
+the ones that implement DISEqC and multipoint LNBf's don't need to
+control the voltage level, provided that either 13V or 18V is sent to
+power up the LNBf.
+
+.. attention:: if more than one device is connected to the same antenna,
+   setting a voltage level may interfere on other devices, as they may lose
+   the capability of setting polarization or IF. So, on those cases, setting
+   the voltage to SEC_VOLTAGE_OFF while the device is not is used is
+   recommended.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/fe-type-t.rst b/Documentation/userspace-api/media/dvb/fe-type-t.rst
new file mode 100644
index 000000000000..1617a8cc9045
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe-type-t.rst
@@ -0,0 +1,98 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+*************
+Frontend type
+*************
+
+For historical reasons, frontend types are named by the type of
+modulation used in transmission. The fontend types are given by
+fe_type_t type, defined as:
+
+
+.. c:type:: fe_type
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. flat-table:: Frontend types
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       3 1 4
+
+
+    -  .. row 1
+
+       -  fe_type
+
+       -  Description
+
+       -  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` equivalent
+	  type
+
+    -  .. row 2
+
+       -  .. _FE-QPSK:
+
+	  ``FE_QPSK``
+
+       -  For DVB-S standard
+
+       -  ``SYS_DVBS``
+
+    -  .. row 3
+
+       -  .. _FE-QAM:
+
+	  ``FE_QAM``
+
+       -  For DVB-C annex A standard
+
+       -  ``SYS_DVBC_ANNEX_A``
+
+    -  .. row 4
+
+       -  .. _FE-OFDM:
+
+	  ``FE_OFDM``
+
+       -  For DVB-T standard
+
+       -  ``SYS_DVBT``
+
+    -  .. row 5
+
+       -  .. _FE-ATSC:
+
+	  ``FE_ATSC``
+
+       -  For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used
+	  in US.
+
+       -  ``SYS_ATSC`` (terrestrial) or ``SYS_DVBC_ANNEX_B`` (cable)
+
+
+Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described
+at the above, as they're supported via the new
+:ref:`FE_GET_PROPERTY/FE_GET_SET_PROPERTY <FE_GET_PROPERTY>`
+ioctl's, using the :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+parameter.
+
+In the old days, struct :c:type:`dvb_frontend_info`
+used to contain ``fe_type_t`` field to indicate the delivery systems,
+filled with either ``FE_QPSK, FE_QAM, FE_OFDM`` or ``FE_ATSC``. While this
+is still filled to keep backward compatibility, the usage of this field
+is deprecated, as it can report just one delivery system, but some
+devices support multiple delivery systems. Please use
+:ref:`DTV_ENUM_DELSYS <DTV-ENUM-DELSYS>` instead.
+
+On devices that support multiple delivery systems, struct
+:c:type:`dvb_frontend_info`::``fe_type_t`` is
+filled with the currently standard, as selected by the last call to
+:ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` using the
+:ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` property.
diff --git a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst
new file mode 100644
index 000000000000..3f4ced2800e3
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst
@@ -0,0 +1,1014 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _fe_property_parameters:
+
+******************************
+Digital TV property parameters
+******************************
+
+There are several different Digital TV parameters that can be used by
+:ref:`FE_SET_PROPERTY and FE_GET_PROPERTY ioctls<FE_GET_PROPERTY>`.
+This section describes each of them. Please notice, however, that only
+a subset of them are needed to setup a frontend.
+
+
+.. _DTV-UNDEFINED:
+
+DTV_UNDEFINED
+=============
+
+Used internally. A GET/SET operation for it won't change or return
+anything.
+
+
+.. _DTV-TUNE:
+
+DTV_TUNE
+========
+
+Interpret the cache of data, build either a traditional frontend
+tunerequest so we can pass validation in the ``FE_SET_FRONTEND`` ioctl.
+
+
+.. _DTV-CLEAR:
+
+DTV_CLEAR
+=========
+
+Reset a cache of data specific to the frontend here. This does not
+effect hardware.
+
+
+.. _DTV-FREQUENCY:
+
+DTV_FREQUENCY
+=============
+
+Frequency of the digital TV transponder/channel.
+
+.. note::
+
+  #. For satellite delivery systems, the frequency is in kHz.
+
+  #. For cable and terrestrial delivery systems, the frequency is in
+     Hz.
+
+  #. On most delivery systems, the frequency is the center frequency
+     of the transponder/channel. The exception is for ISDB-T, where
+     the main carrier has a 1/7 offset from the center.
+
+  #. For ISDB-T, the channels are usually transmitted with an offset of
+     about 143kHz. E.g. a valid frequency could be 474,143 kHz. The
+     stepping is  bound to the bandwidth of the channel which is
+     typically 6MHz.
+
+  #. In ISDB-Tsb, the channel consists of only one or three segments the
+     frequency step is 429kHz, 3*429 respectively.
+
+
+.. _DTV-MODULATION:
+
+DTV_MODULATION
+==============
+
+Specifies the frontend modulation type for delivery systems that
+supports more multiple modulations.
+
+The modulation can be one of the types defined by enum :c:type:`fe_modulation`.
+
+Most of the digital TV standards offers more than one possible
+modulation type.
+
+The table below presents a summary of the types of modulation types
+supported by each delivery system, as currently defined by specs.
+
+======================= =======================================================
+Standard		Modulation types
+======================= =======================================================
+ATSC (version 1)	8-VSB and 16-VSB.
+DMTB			4-QAM, 16-QAM, 32-QAM, 64-QAM and 4-QAM-NR.
+DVB-C Annex A/C		16-QAM, 32-QAM, 64-QAM and 256-QAM.
+DVB-C Annex B		64-QAM.
+DVB-T			QPSK, 16-QAM and 64-QAM.
+DVB-T2			QPSK, 16-QAM, 64-QAM and 256-QAM.
+DVB-S			No need to set. It supports only QPSK.
+DVB-S2			QPSK, 8-PSK, 16-APSK and 32-APSK.
+ISDB-T			QPSK, DQPSK, 16-QAM and 64-QAM.
+ISDB-S			8-PSK, QPSK and BPSK.
+======================= =======================================================
+
+.. note::
+
+   Please notice that some of the above modulation types may not be
+   defined currently at the Kernel. The reason is simple: no driver
+   needed such definition yet.
+
+
+.. _DTV-BANDWIDTH-HZ:
+
+DTV_BANDWIDTH_HZ
+================
+
+Bandwidth for the channel, in HZ.
+
+Should be set only for terrestrial delivery systems.
+
+Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``,
+``8000000``, ``10000000``.
+
+======================= =======================================================
+Terrestrial Standard	Possible values for bandwidth
+======================= =======================================================
+ATSC (version 1)	No need to set. It is always 6MHz.
+DMTB			No need to set. It is always 8MHz.
+DVB-T			6MHz, 7MHz and 8MHz.
+DVB-T2			1.172 MHz, 5MHz, 6MHz, 7MHz, 8MHz and 10MHz
+ISDB-T			5MHz, 6MHz, 7MHz and 8MHz, although most places
+			use 6MHz.
+======================= =======================================================
+
+
+.. note::
+
+
+  #. For ISDB-Tsb, the bandwidth can vary depending on the number of
+     connected segments.
+
+     It can be easily derived from other parameters
+     (DTV_ISDBT_SB_SEGMENT_IDX, DTV_ISDBT_SB_SEGMENT_COUNT).
+
+  #. On Satellite and Cable delivery systems, the bandwidth depends on
+     the symbol rate. So, the Kernel will silently ignore any setting
+     :ref:`DTV-BANDWIDTH-HZ`. I will however fill it back with a
+     bandwidth estimation.
+
+     Such bandwidth estimation takes into account the symbol rate set with
+     :ref:`DTV-SYMBOL-RATE`, and the rolloff factor, with is fixed for
+     DVB-C and DVB-S.
+
+     For DVB-S2, the rolloff should also be set via :ref:`DTV-ROLLOFF`.
+
+
+.. _DTV-INVERSION:
+
+DTV_INVERSION
+=============
+
+Specifies if the frontend should do spectral inversion or not.
+
+The acceptable values are defined by :c:type:`fe_spectral_inversion`.
+
+
+.. _DTV-DISEQC-MASTER:
+
+DTV_DISEQC_MASTER
+=================
+
+Currently not implemented.
+
+
+.. _DTV-SYMBOL-RATE:
+
+DTV_SYMBOL_RATE
+===============
+
+Used on cable and satellite delivery systems.
+
+Digital TV symbol rate, in bauds (symbols/second).
+
+
+.. _DTV-INNER-FEC:
+
+DTV_INNER_FEC
+=============
+
+Used on cable and satellite delivery systems.
+
+The acceptable values are defined by :c:type:`fe_code_rate`.
+
+
+.. _DTV-VOLTAGE:
+
+DTV_VOLTAGE
+===========
+
+Used on satellite delivery systems.
+
+The voltage is usually used with non-DiSEqC capable LNBs to switch the
+polarzation (horizontal/vertical). When using DiSEqC epuipment this
+voltage has to be switched consistently to the DiSEqC commands as
+described in the DiSEqC spec.
+
+The acceptable values are defined by :c:type:`fe_sec_voltage`.
+
+
+.. _DTV-TONE:
+
+DTV_TONE
+========
+
+Currently not used.
+
+
+.. _DTV-PILOT:
+
+DTV_PILOT
+=========
+
+Used on DVB-S2.
+
+Sets DVB-S2 pilot.
+
+The acceptable values are defined by :c:type:`fe_pilot`.
+
+
+.. _DTV-ROLLOFF:
+
+DTV_ROLLOFF
+===========
+
+Used on DVB-S2.
+
+Sets DVB-S2 rolloff.
+
+The acceptable values are defined by :c:type:`fe_rolloff`.
+
+
+.. _DTV-DISEQC-SLAVE-REPLY:
+
+DTV_DISEQC_SLAVE_REPLY
+======================
+
+Currently not implemented.
+
+
+.. _DTV-FE-CAPABILITY-COUNT:
+
+DTV_FE_CAPABILITY_COUNT
+=======================
+
+Currently not implemented.
+
+
+.. _DTV-FE-CAPABILITY:
+
+DTV_FE_CAPABILITY
+=================
+
+Currently not implemented.
+
+
+.. _DTV-DELIVERY-SYSTEM:
+
+DTV_DELIVERY_SYSTEM
+===================
+
+Specifies the type of the delivery system.
+
+The acceptable values are defined by :c:type:`fe_delivery_system`.
+
+
+.. _DTV-ISDBT-PARTIAL-RECEPTION:
+
+DTV_ISDBT_PARTIAL_RECEPTION
+===========================
+
+Used only on ISDB.
+
+If ``DTV_ISDBT_SOUND_BROADCASTING`` is '0' this bit-field represents
+whether the channel is in partial reception mode or not.
+
+If '1' ``DTV_ISDBT_LAYERA_*`` values are assigned to the center segment
+and ``DTV_ISDBT_LAYERA_SEGMENT_COUNT`` has to be '1'.
+
+If in addition ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'
+``DTV_ISDBT_PARTIAL_RECEPTION`` represents whether this ISDB-Tsb channel
+is consisting of one segment and layer or three segments and two layers.
+
+Possible values: 0, 1, -1 (AUTO)
+
+
+.. _DTV-ISDBT-SOUND-BROADCASTING:
+
+DTV_ISDBT_SOUND_BROADCASTING
+============================
+
+Used only on ISDB.
+
+This field represents whether the other DTV_ISDBT_*-parameters are
+referring to an ISDB-T and an ISDB-Tsb channel. (See also
+``DTV_ISDBT_PARTIAL_RECEPTION``).
+
+Possible values: 0, 1, -1 (AUTO)
+
+
+.. _DTV-ISDBT-SB-SUBCHANNEL-ID:
+
+DTV_ISDBT_SB_SUBCHANNEL_ID
+==========================
+
+Used only on ISDB.
+
+This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
+
+(Note of the author: This might not be the correct description of the
+``SUBCHANNEL-ID`` in all details, but it is my understanding of the
+technical background needed to program a device)
+
+An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
+set of connected ISDB-Tsb channels. In this set of channels every
+channel can be received independently. The number of connected ISDB-Tsb
+segment can vary, e.g. depending on the frequency spectrum bandwidth
+available.
+
+Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
+broadcaster has several possibilities to put those channels in the air:
+Assuming a normal 13-segment ISDB-T spectrum he can align the 8 segments
+from position 1-8 to 5-13 or anything in between.
+
+The underlying layer of segments are subchannels: each segment is
+consisting of several subchannels with a predefined IDs. A sub-channel
+is used to help the demodulator to synchronize on the channel.
+
+An ISDB-T channel is always centered over all sub-channels. As for the
+example above, in ISDB-Tsb it is no longer as simple as that.
+
+``The DTV_ISDBT_SB_SUBCHANNEL_ID`` parameter is used to give the
+sub-channel ID of the segment to be demodulated.
+
+Possible values: 0 .. 41, -1 (AUTO)
+
+
+.. _DTV-ISDBT-SB-SEGMENT-IDX:
+
+DTV_ISDBT_SB_SEGMENT_IDX
+========================
+
+Used only on ISDB.
+
+This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
+
+``DTV_ISDBT_SB_SEGMENT_IDX`` gives the index of the segment to be
+demodulated for an ISDB-Tsb channel where several of them are
+transmitted in the connected manner.
+
+Possible values: 0 .. ``DTV_ISDBT_SB_SEGMENT_COUNT`` - 1
+
+Note: This value cannot be determined by an automatic channel search.
+
+
+.. _DTV-ISDBT-SB-SEGMENT-COUNT:
+
+DTV_ISDBT_SB_SEGMENT_COUNT
+==========================
+
+Used only on ISDB.
+
+This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
+
+``DTV_ISDBT_SB_SEGMENT_COUNT`` gives the total count of connected
+ISDB-Tsb channels.
+
+Possible values: 1 .. 13
+
+Note: This value cannot be determined by an automatic channel search.
+
+
+.. _isdb-hierq-layers:
+
+DTV-ISDBT-LAYER[A-C] parameters
+===============================
+
+Used only on ISDB.
+
+ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
+ISDB-T hierarchical layers can be decoded simultaneously. For that
+reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders.
+
+ISDB-T has 3 hierarchical layers which each can use a part of the
+available segments. The total number of segments over all layers has to
+13 in ISDB-T.
+
+There are 3 parameter sets, for Layers A, B and C.
+
+
+.. _DTV-ISDBT-LAYER-ENABLED:
+
+DTV_ISDBT_LAYER_ENABLED
+-----------------------
+
+Used only on ISDB.
+
+Hierarchical reception in ISDB-T is achieved by enabling or disabling
+layers in the decoding process. Setting all bits of
+``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to
+be demodulated. This is the default.
+
+If the channel is in the partial reception mode
+(``DTV_ISDBT_PARTIAL_RECEPTION`` = 1) the central segment can be decoded
+independently of the other 12 segments. In that mode layer A has to have
+a ``SEGMENT_COUNT`` of 1.
+
+In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according
+to ``DTV_ISDBT_PARTIAL_RECEPTION``. ``SEGMENT_COUNT`` must be filled
+accordingly.
+
+Only the values of the first 3 bits are used. Other bits will be silently ignored:
+
+``DTV_ISDBT_LAYER_ENABLED`` bit 0: layer A enabled
+
+``DTV_ISDBT_LAYER_ENABLED`` bit 1: layer B enabled
+
+``DTV_ISDBT_LAYER_ENABLED`` bit 2: layer C enabled
+
+``DTV_ISDBT_LAYER_ENABLED`` bits 3-31: unused
+
+
+.. _DTV-ISDBT-LAYER-FEC:
+
+DTV_ISDBT_LAYER[A-C]_FEC
+------------------------
+
+Used only on ISDB.
+
+The Forward Error Correction mechanism used by a given ISDB Layer, as
+defined by :c:type:`fe_code_rate`.
+
+
+Possible values are: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``,
+``FEC_5_6``, ``FEC_7_8``
+
+
+.. _DTV-ISDBT-LAYER-MODULATION:
+
+DTV_ISDBT_LAYER[A-C]_MODULATION
+-------------------------------
+
+Used only on ISDB.
+
+The modulation used by a given ISDB Layer, as defined by
+:c:type:`fe_modulation`.
+
+Possible values are: ``QAM_AUTO``, ``QPSK``, ``QAM_16``, ``QAM_64``, ``DQPSK``
+
+.. note::
+
+   #. If layer C is ``DQPSK``, then layer B has to be ``DQPSK``.
+
+   #. If layer B is ``DQPSK`` and ``DTV_ISDBT_PARTIAL_RECEPTION``\ = 0,
+      then layer has to be ``DQPSK``.
+
+
+.. _DTV-ISDBT-LAYER-SEGMENT-COUNT:
+
+DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT
+----------------------------------
+
+Used only on ISDB.
+
+Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)
+
+Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and
+``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER[A-C]_SEGMENT_COUNT``
+
+.. _isdbt-layer_seg-cnt-table:
+
+.. flat-table:: Truth table for ISDB-T Sound Broadcasting
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  Partial Reception
+
+       -  Sound Broadcasting
+
+       -  Layer A width
+
+       -  Layer B width
+
+       -  Layer C width
+
+       -  total width
+
+    -  .. row 2
+
+       -  0
+
+       -  0
+
+       -  1 .. 13
+
+       -  1 .. 13
+
+       -  1 .. 13
+
+       -  13
+
+    -  .. row 3
+
+       -  1
+
+       -  0
+
+       -  1
+
+       -  1 .. 13
+
+       -  1 .. 13
+
+       -  13
+
+    -  .. row 4
+
+       -  0
+
+       -  1
+
+       -  1
+
+       -  0
+
+       -  0
+
+       -  1
+
+    -  .. row 5
+
+       -  1
+
+       -  1
+
+       -  1
+
+       -  2
+
+       -  0
+
+       -  13
+
+
+
+.. _DTV-ISDBT-LAYER-TIME-INTERLEAVING:
+
+DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING
+--------------------------------------
+
+Used only on ISDB.
+
+Valid values: 0, 1, 2, 4, -1 (AUTO)
+
+when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid.
+
+Note: The real time interleaving length depends on the mode (fft-size).
+The values here are referring to what can be found in the
+TMCC-structure, as shown in the table below.
+
+
+.. c:type:: isdbt_layer_interleaving_table
+
+.. flat-table:: ISDB-T time interleaving modes
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING``
+
+       -  Mode 1 (2K FFT)
+
+       -  Mode 2 (4K FFT)
+
+       -  Mode 3 (8K FFT)
+
+    -  .. row 2
+
+       -  0
+
+       -  0
+
+       -  0
+
+       -  0
+
+    -  .. row 3
+
+       -  1
+
+       -  4
+
+       -  2
+
+       -  1
+
+    -  .. row 4
+
+       -  2
+
+       -  8
+
+       -  4
+
+       -  2
+
+    -  .. row 5
+
+       -  4
+
+       -  16
+
+       -  8
+
+       -  4
+
+
+
+.. _DTV-ATSCMH-FIC-VER:
+
+DTV_ATSCMH_FIC_VER
+------------------
+
+Used only on ATSC-MH.
+
+Version number of the FIC (Fast Information Channel) signaling data.
+
+FIC is used for relaying information to allow rapid service acquisition
+by the receiver.
+
+Possible values: 0, 1, 2, 3, ..., 30, 31
+
+
+.. _DTV-ATSCMH-PARADE-ID:
+
+DTV_ATSCMH_PARADE_ID
+--------------------
+
+Used only on ATSC-MH.
+
+Parade identification number
+
+A parade is a collection of up to eight MH groups, conveying one or two
+ensembles.
+
+Possible values: 0, 1, 2, 3, ..., 126, 127
+
+
+.. _DTV-ATSCMH-NOG:
+
+DTV_ATSCMH_NOG
+--------------
+
+Used only on ATSC-MH.
+
+Number of MH groups per MH subframe for a designated parade.
+
+Possible values: 1, 2, 3, 4, 5, 6, 7, 8
+
+
+.. _DTV-ATSCMH-TNOG:
+
+DTV_ATSCMH_TNOG
+---------------
+
+Used only on ATSC-MH.
+
+Total number of MH groups including all MH groups belonging to all MH
+parades in one MH subframe.
+
+Possible values: 0, 1, 2, 3, ..., 30, 31
+
+
+.. _DTV-ATSCMH-SGN:
+
+DTV_ATSCMH_SGN
+--------------
+
+Used only on ATSC-MH.
+
+Start group number.
+
+Possible values: 0, 1, 2, 3, ..., 14, 15
+
+
+.. _DTV-ATSCMH-PRC:
+
+DTV_ATSCMH_PRC
+--------------
+
+Used only on ATSC-MH.
+
+Parade repetition cycle.
+
+Possible values: 1, 2, 3, 4, 5, 6, 7, 8
+
+
+.. _DTV-ATSCMH-RS-FRAME-MODE:
+
+DTV_ATSCMH_RS_FRAME_MODE
+------------------------
+
+Used only on ATSC-MH.
+
+Reed Solomon (RS) frame mode.
+
+The acceptable values are defined by :c:type:`atscmh_rs_frame_mode`.
+
+
+.. _DTV-ATSCMH-RS-FRAME-ENSEMBLE:
+
+DTV_ATSCMH_RS_FRAME_ENSEMBLE
+----------------------------
+
+Used only on ATSC-MH.
+
+Reed Solomon(RS) frame ensemble.
+
+The acceptable values are defined by :c:type:`atscmh_rs_frame_ensemble`.
+
+
+.. _DTV-ATSCMH-RS-CODE-MODE-PRI:
+
+DTV_ATSCMH_RS_CODE_MODE_PRI
+---------------------------
+
+Used only on ATSC-MH.
+
+Reed Solomon (RS) code mode (primary).
+
+The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
+
+
+.. _DTV-ATSCMH-RS-CODE-MODE-SEC:
+
+DTV_ATSCMH_RS_CODE_MODE_SEC
+---------------------------
+
+Used only on ATSC-MH.
+
+Reed Solomon (RS) code mode (secondary).
+
+The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
+
+
+.. _DTV-ATSCMH-SCCC-BLOCK-MODE:
+
+DTV_ATSCMH_SCCC_BLOCK_MODE
+--------------------------
+
+Used only on ATSC-MH.
+
+Series Concatenated Convolutional Code Block Mode.
+
+The acceptable values are defined by :c:type:`atscmh_sccc_block_mode`.
+
+
+.. _DTV-ATSCMH-SCCC-CODE-MODE-A:
+
+DTV_ATSCMH_SCCC_CODE_MODE_A
+---------------------------
+
+Used only on ATSC-MH.
+
+Series Concatenated Convolutional Code Rate.
+
+The acceptable values are defined by :c:type:`atscmh_sccc_code_mode`.
+
+.. _DTV-ATSCMH-SCCC-CODE-MODE-B:
+
+DTV_ATSCMH_SCCC_CODE_MODE_B
+---------------------------
+
+Used only on ATSC-MH.
+
+Series Concatenated Convolutional Code Rate.
+
+Possible values are the same as documented on enum
+:c:type:`atscmh_sccc_code_mode`.
+
+
+.. _DTV-ATSCMH-SCCC-CODE-MODE-C:
+
+DTV_ATSCMH_SCCC_CODE_MODE_C
+---------------------------
+
+Used only on ATSC-MH.
+
+Series Concatenated Convolutional Code Rate.
+
+Possible values are the same as documented on enum
+:c:type:`atscmh_sccc_code_mode`.
+
+
+.. _DTV-ATSCMH-SCCC-CODE-MODE-D:
+
+DTV_ATSCMH_SCCC_CODE_MODE_D
+---------------------------
+
+Used only on ATSC-MH.
+
+Series Concatenated Convolutional Code Rate.
+
+Possible values are the same as documented on enum
+:c:type:`atscmh_sccc_code_mode`.
+
+
+.. _DTV-API-VERSION:
+
+DTV_API_VERSION
+===============
+
+Returns the major/minor version of the Digital TV API
+
+
+.. _DTV-CODE-RATE-HP:
+
+DTV_CODE_RATE_HP
+================
+
+Used on terrestrial transmissions.
+
+The acceptable values are defined by :c:type:`fe_transmit_mode`.
+
+
+.. _DTV-CODE-RATE-LP:
+
+DTV_CODE_RATE_LP
+================
+
+Used on terrestrial transmissions.
+
+The acceptable values are defined by :c:type:`fe_transmit_mode`.
+
+
+.. _DTV-GUARD-INTERVAL:
+
+DTV_GUARD_INTERVAL
+==================
+
+The acceptable values are defined by :c:type:`fe_guard_interval`.
+
+.. note::
+
+   #. If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the
+      hardware will try to find the correct guard interval (if capable) and
+      will use TMCC to fill in the missing parameters.
+   #. Intervals ``GUARD_INTERVAL_1_128``, ``GUARD_INTERVAL_19_128``
+      and ``GUARD_INTERVAL_19_256`` are used only for DVB-T2 at
+      present.
+   #. Intervals ``GUARD_INTERVAL_PN420``, ``GUARD_INTERVAL_PN595`` and
+      ``GUARD_INTERVAL_PN945`` are used only for DMTB at the present.
+      On such standard, only those intervals and ``GUARD_INTERVAL_AUTO``
+      are valid.
+
+.. _DTV-TRANSMISSION-MODE:
+
+DTV_TRANSMISSION_MODE
+=====================
+
+
+Used only on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB.
+
+Specifies the FFT size (with corresponds to the approximate number of
+carriers) used by the standard.
+
+The acceptable values are defined by :c:type:`fe_transmit_mode`.
+
+.. note::
+
+   #. ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
+      **mode** on such standard, and are numbered from 1 to 3:
+
+      ====	========	========================
+      Mode	FFT size	Transmission mode
+      ====	========	========================
+      1		2K		``TRANSMISSION_MODE_2K``
+      2		4K		``TRANSMISSION_MODE_4K``
+      3		8K		``TRANSMISSION_MODE_8K``
+      ====	========	========================
+
+   #. If ``DTV_TRANSMISSION_MODE`` is set the ``TRANSMISSION_MODE_AUTO``
+      the hardware will try to find the correct FFT-size (if capable) and
+      will use TMCC to fill in the missing parameters.
+
+   #. DVB-T specifies 2K and 8K as valid sizes.
+
+   #. DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.
+
+   #. DTMB specifies C1 and C3780.
+
+
+.. _DTV-HIERARCHY:
+
+DTV_HIERARCHY
+=============
+
+Used only on DVB-T and DVB-T2.
+
+Frontend hierarchy.
+
+The acceptable values are defined by :c:type:`fe_hierarchy`.
+
+
+.. _DTV-STREAM-ID:
+
+DTV_STREAM_ID
+=============
+
+Used on DVB-S2, DVB-T2 and ISDB-S.
+
+DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on
+a single transport stream. This property enables the digital TV driver to
+handle substream filtering, when supported by the hardware. By default,
+substream filtering is disabled.
+
+For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255.
+
+For ISDB, the valid substream id range is from 1 to 65535.
+
+To disable it, you should use the special macro NO_STREAM_ID_FILTER.
+
+Note: any value outside the id range also disables filtering.
+
+
+.. _DTV-DVBT2-PLP-ID-LEGACY:
+
+DTV_DVBT2_PLP_ID_LEGACY
+=======================
+
+Obsolete, replaced with DTV_STREAM_ID.
+
+
+.. _DTV-ENUM-DELSYS:
+
+DTV_ENUM_DELSYS
+===============
+
+A Multi standard frontend needs to advertise the delivery systems
+provided. Applications need to enumerate the provided delivery systems,
+before using any other operation with the frontend. Prior to it's
+introduction, FE_GET_INFO was used to determine a frontend type. A
+frontend which provides more than a single delivery system,
+FE_GET_INFO doesn't help much. Applications which intends to use a
+multistandard frontend must enumerate the delivery systems associated
+with it, rather than trying to use FE_GET_INFO. In the case of a
+legacy frontend, the result is just the same as with FE_GET_INFO, but
+in a more structured format
+
+The acceptable values are defined by :c:type:`fe_delivery_system`.
+
+
+.. _DTV-INTERLEAVING:
+
+DTV_INTERLEAVING
+================
+
+Time interleaving to be used.
+
+The acceptable values are defined by :c:type:`fe_interleaving`.
+
+
+.. _DTV-LNA:
+
+DTV_LNA
+=======
+
+Low-noise amplifier.
+
+Hardware might offer controllable LNA which can be set manually using
+that parameter. Usually LNA could be found only from terrestrial devices
+if at all.
+
+Possible values: 0, 1, LNA_AUTO
+
+0, LNA off
+
+1, LNA on
+
+use the special macro LNA_AUTO to set LNA auto
+
+
+.. _DTV-SCRAMBLING-SEQUENCE-INDEX:
+
+DTV_SCRAMBLING_SEQUENCE_INDEX
+=============================
+
+Used on DVB-S2.
+
+This 18 bit field, when present, carries the index of the DVB-S2 physical
+layer scrambling sequence as defined in clause 5.5.4 of EN 302 307.
+There is no explicit signalling method to convey scrambling sequence index
+to the receiver. If S2 satellite delivery system descriptor is available
+it can be used to read the scrambling sequence index (EN 300 468 table 41).
+
+By default, gold scrambling sequence index 0 is used.
+
+The valid scrambling sequence index range is from 0 to 262142.
diff --git a/Documentation/userspace-api/media/dvb/frontend-header.rst b/Documentation/userspace-api/media/dvb/frontend-header.rst
new file mode 100644
index 000000000000..cf8e515e5e1f
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend-header.rst
@@ -0,0 +1,13 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+Frontend uAPI data types
+========================
+
+.. kernel-doc:: include/uapi/linux/dvb/frontend.h
diff --git a/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst b/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst
new file mode 100644
index 000000000000..56657a6ec6ff
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst
@@ -0,0 +1,82 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend-property-cable-systems:
+
+*****************************************
+Properties used on cable delivery systems
+*****************************************
+
+
+.. _dvbc-params:
+
+DVB-C delivery system
+=====================
+
+The DVB-C Annex-A is the widely used cable standard. Transmission uses
+QAM modulation.
+
+The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It
+supports a subset of the Annex A modulation types, and a roll-off of
+0.13, instead of 0.15
+
+The following parameters are valid for DVB-C Annex A/C:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>`
+
+-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _dvbc-annex-b-params:
+
+DVB-C Annex B delivery system
+=============================
+
+The DVB-C Annex-B is only used on a few Countries like the United
+States.
+
+The following parameters are valid for DVB-C Annex B:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
diff --git a/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst b/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst
new file mode 100644
index 000000000000..e64fd625c476
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst
@@ -0,0 +1,112 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend-property-satellite-systems:
+
+*********************************************
+Properties used on satellite delivery systems
+*********************************************
+
+
+.. _dvbs-params:
+
+DVB-S delivery system
+=====================
+
+The following parameters are valid for DVB-S:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>`
+
+-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
+
+-  :ref:`DTV_VOLTAGE <DTV-VOLTAGE>`
+
+-  :ref:`DTV_TONE <DTV-TONE>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+Future implementations might add those two missing parameters:
+
+-  :ref:`DTV_DISEQC_MASTER <DTV-DISEQC-MASTER>`
+
+-  :ref:`DTV_DISEQC_SLAVE_REPLY <DTV-DISEQC-SLAVE-REPLY>`
+
+
+.. _dvbs2-params:
+
+DVB-S2 delivery system
+======================
+
+In addition to all parameters valid for DVB-S, DVB-S2 supports the
+following parameters:
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_PILOT <DTV-PILOT>`
+
+-  :ref:`DTV_ROLLOFF <DTV-ROLLOFF>`
+
+-  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
+
+-  :ref:`DTV_SCRAMBLING_SEQUENCE_INDEX <DTV-SCRAMBLING-SEQUENCE-INDEX>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _turbo-params:
+
+Turbo code delivery system
+==========================
+
+In addition to all parameters valid for DVB-S, turbo code supports the
+following parameters:
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+
+.. _isdbs-params:
+
+ISDB-S delivery system
+======================
+
+The following parameters are valid for ISDB-S:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>`
+
+-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
+
+-  :ref:`DTV_VOLTAGE <DTV-VOLTAGE>`
+
+-  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
diff --git a/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst b/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst
new file mode 100644
index 000000000000..1079522b2425
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst
@@ -0,0 +1,301 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend-property-terrestrial-systems:
+
+***********************************************
+Properties used on terrestrial delivery systems
+***********************************************
+
+
+.. _dvbt-params:
+
+DVB-T delivery system
+=====================
+
+The following parameters are valid for DVB-T:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_CODE_RATE_HP <DTV-CODE-RATE-HP>`
+
+-  :ref:`DTV_CODE_RATE_LP <DTV-CODE-RATE-LP>`
+
+-  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
+
+-  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
+
+-  :ref:`DTV_HIERARCHY <DTV-HIERARCHY>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _dvbt2-params:
+
+DVB-T2 delivery system
+======================
+
+DVB-T2 support is currently in the early stages of development, so
+expect that this section maygrow and become more detailed with time.
+
+The following parameters are valid for DVB-T2:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_CODE_RATE_HP <DTV-CODE-RATE-HP>`
+
+-  :ref:`DTV_CODE_RATE_LP <DTV-CODE-RATE-LP>`
+
+-  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
+
+-  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
+
+-  :ref:`DTV_HIERARCHY <DTV-HIERARCHY>`
+
+-  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _isdbt:
+
+ISDB-T delivery system
+======================
+
+This ISDB-T/ISDB-Tsb API extension should reflect all information needed
+to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible that some
+very sophisticated devices won't need certain parameters to tune.
+
+The information given here should help application writers to know how
+to handle ISDB-T and ISDB-Tsb hardware using the Linux Digital TV API.
+
+The details given here about ISDB-T and ISDB-Tsb are just enough to
+basically show the dependencies between the needed parameter values, but
+surely some information is left out. For more detailed information see
+the following documents:
+
+ARIB STD-B31 - "Transmission System for Digital Terrestrial Television
+Broadcasting" and
+
+ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial Television
+Broadcasting".
+
+In order to understand the ISDB specific parameters, one has to have
+some knowledge the channel structure in ISDB-T and ISDB-Tsb. I.e. it has
+to be known to the reader that an ISDB-T channel consists of 13
+segments, that it can have up to 3 layer sharing those segments, and
+things like that.
+
+The following parameters are valid for ISDB-T:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
+
+-  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
+
+-  :ref:`DTV_ISDBT_LAYER_ENABLED <DTV-ISDBT-LAYER-ENABLED>`
+
+-  :ref:`DTV_ISDBT_PARTIAL_RECEPTION <DTV-ISDBT-PARTIAL-RECEPTION>`
+
+-  :ref:`DTV_ISDBT_SOUND_BROADCASTING <DTV-ISDBT-SOUND-BROADCASTING>`
+
+-  :ref:`DTV_ISDBT_SB_SUBCHANNEL_ID <DTV-ISDBT-SB-SUBCHANNEL-ID>`
+
+-  :ref:`DTV_ISDBT_SB_SEGMENT_IDX <DTV-ISDBT-SB-SEGMENT-IDX>`
+
+-  :ref:`DTV_ISDBT_SB_SEGMENT_COUNT <DTV-ISDBT-SB-SEGMENT-COUNT>`
+
+-  :ref:`DTV_ISDBT_LAYERA_FEC <DTV-ISDBT-LAYER-FEC>`
+
+-  :ref:`DTV_ISDBT_LAYERA_MODULATION <DTV-ISDBT-LAYER-MODULATION>`
+
+-  :ref:`DTV_ISDBT_LAYERA_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>`
+
+-  :ref:`DTV_ISDBT_LAYERA_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>`
+
+-  :ref:`DTV_ISDBT_LAYERB_FEC <DTV-ISDBT-LAYER-FEC>`
+
+-  :ref:`DTV_ISDBT_LAYERB_MODULATION <DTV-ISDBT-LAYER-MODULATION>`
+
+-  :ref:`DTV_ISDBT_LAYERB_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>`
+
+-  :ref:`DTV_ISDBT_LAYERB_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>`
+
+-  :ref:`DTV_ISDBT_LAYERC_FEC <DTV-ISDBT-LAYER-FEC>`
+
+-  :ref:`DTV_ISDBT_LAYERC_MODULATION <DTV-ISDBT-LAYER-MODULATION>`
+
+-  :ref:`DTV_ISDBT_LAYERC_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>`
+
+-  :ref:`DTV_ISDBT_LAYERC_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _atsc-params:
+
+ATSC delivery system
+====================
+
+The following parameters are valid for ATSC:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _atscmh-params:
+
+ATSC-MH delivery system
+=======================
+
+The following parameters are valid for ATSC-MH:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_ATSCMH_FIC_VER <DTV-ATSCMH-FIC-VER>`
+
+-  :ref:`DTV_ATSCMH_PARADE_ID <DTV-ATSCMH-PARADE-ID>`
+
+-  :ref:`DTV_ATSCMH_NOG <DTV-ATSCMH-NOG>`
+
+-  :ref:`DTV_ATSCMH_TNOG <DTV-ATSCMH-TNOG>`
+
+-  :ref:`DTV_ATSCMH_SGN <DTV-ATSCMH-SGN>`
+
+-  :ref:`DTV_ATSCMH_PRC <DTV-ATSCMH-PRC>`
+
+-  :ref:`DTV_ATSCMH_RS_FRAME_MODE <DTV-ATSCMH-RS-FRAME-MODE>`
+
+-  :ref:`DTV_ATSCMH_RS_FRAME_ENSEMBLE <DTV-ATSCMH-RS-FRAME-ENSEMBLE>`
+
+-  :ref:`DTV_ATSCMH_RS_CODE_MODE_PRI <DTV-ATSCMH-RS-CODE-MODE-PRI>`
+
+-  :ref:`DTV_ATSCMH_RS_CODE_MODE_SEC <DTV-ATSCMH-RS-CODE-MODE-SEC>`
+
+-  :ref:`DTV_ATSCMH_SCCC_BLOCK_MODE <DTV-ATSCMH-SCCC-BLOCK-MODE>`
+
+-  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_A <DTV-ATSCMH-SCCC-CODE-MODE-A>`
+
+-  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_B <DTV-ATSCMH-SCCC-CODE-MODE-B>`
+
+-  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_C <DTV-ATSCMH-SCCC-CODE-MODE-C>`
+
+-  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_D <DTV-ATSCMH-SCCC-CODE-MODE-D>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _dtmb-params:
+
+DTMB delivery system
+====================
+
+The following parameters are valid for DTMB:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
+
+-  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
+
+-  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
+
+-  :ref:`DTV_INTERLEAVING <DTV-INTERLEAVING>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
diff --git a/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst b/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst
new file mode 100644
index 000000000000..ae6ed5128deb
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst
@@ -0,0 +1,252 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend-stat-properties:
+
+******************************
+Frontend statistics indicators
+******************************
+
+The values are returned via ``dtv_property.stat``. If the property is
+supported, ``dtv_property.stat.len`` is bigger than zero.
+
+For most delivery systems, ``dtv_property.stat.len`` will be 1 if the
+stats is supported, and the properties will return a single value for
+each parameter.
+
+It should be noted, however, that new OFDM delivery systems like ISDB
+can use different modulation types for each group of carriers. On such
+standards, up to 3 groups of statistics can be provided, and
+``dtv_property.stat.len`` is updated to reflect the "global" metrics,
+plus one metric per each carrier group (called "layer" on ISDB).
+
+So, in order to be consistent with other delivery systems, the first
+value at :c:type:`dtv_property.stat.dtv_stats <dtv_stats>` array refers
+to the global metric. The other elements of the array represent each
+layer, starting from layer A(index 1), layer B (index 2) and so on.
+
+The number of filled elements are stored at ``dtv_property.stat.len``.
+
+Each element of the ``dtv_property.stat.dtv_stats`` array consists on
+two elements:
+
+-  ``svalue`` or ``uvalue``, where ``svalue`` is for signed values of
+   the measure (dB measures) and ``uvalue`` is for unsigned values
+   (counters, relative scale)
+
+-  ``scale`` - Scale for the value. It can be:
+
+   -  ``FE_SCALE_NOT_AVAILABLE`` - The parameter is supported by the
+      frontend, but it was not possible to collect it (could be a
+      transitory or permanent condition)
+
+   -  ``FE_SCALE_DECIBEL`` - parameter is a signed value, measured in
+      1/1000 dB
+
+   -  ``FE_SCALE_RELATIVE`` - parameter is a unsigned value, where 0
+      means 0% and 65535 means 100%.
+
+   -  ``FE_SCALE_COUNTER`` - parameter is a unsigned value that counts
+      the occurrence of an event, like bit error, block error, or lapsed
+      time.
+
+
+.. _DTV-STAT-SIGNAL-STRENGTH:
+
+DTV_STAT_SIGNAL_STRENGTH
+========================
+
+Indicates the signal strength level at the analog part of the tuner or
+of the demod.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_DECIBEL`` - signal strength is in 0.001 dBm units, power
+   measured in miliwatts. This value is generally negative.
+
+-  ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100%
+   measurement for power (actually, 0 to 65535).
+
+
+.. _DTV-STAT-CNR:
+
+DTV_STAT_CNR
+============
+
+Indicates the Signal to Noise ratio for the main carrier.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_DECIBEL`` - Signal/Noise ratio is in 0.001 dB units.
+
+-  ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100%
+   measurement for Signal/Noise (actually, 0 to 65535).
+
+
+.. _DTV-STAT-PRE-ERROR-BIT-COUNT:
+
+DTV_STAT_PRE_ERROR_BIT_COUNT
+============================
+
+Measures the number of bit errors before the forward error correction
+(FEC) on the inner coding block (before Viterbi, LDPC or other inner
+code).
+
+This measure is taken during the same interval as
+``DTV_STAT_PRE_TOTAL_BIT_COUNT``.
+
+In order to get the BER (Bit Error Rate) measurement, it should be
+divided by
+:ref:`DTV_STAT_PRE_TOTAL_BIT_COUNT <DTV-STAT-PRE-TOTAL-BIT-COUNT>`.
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of error bits counted before the inner
+   coding.
+
+
+.. _DTV-STAT-PRE-TOTAL-BIT-COUNT:
+
+DTV_STAT_PRE_TOTAL_BIT_COUNT
+============================
+
+Measures the amount of bits received before the inner code block, during
+the same period as
+:ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`
+measurement was taken.
+
+It should be noted that this measurement can be smaller than the total
+amount of bits on the transport stream, as the frontend may need to
+manually restart the measurement, losing some data between each
+measurement interval.
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of bits counted while measuring
+   :ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`.
+
+
+.. _DTV-STAT-POST-ERROR-BIT-COUNT:
+
+DTV_STAT_POST_ERROR_BIT_COUNT
+=============================
+
+Measures the number of bit errors after the forward error correction
+(FEC) done by inner code block (after Viterbi, LDPC or other inner
+code).
+
+This measure is taken during the same interval as
+``DTV_STAT_POST_TOTAL_BIT_COUNT``.
+
+In order to get the BER (Bit Error Rate) measurement, it should be
+divided by
+:ref:`DTV_STAT_POST_TOTAL_BIT_COUNT <DTV-STAT-POST-TOTAL-BIT-COUNT>`.
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of error bits counted after the inner
+   coding.
+
+
+.. _DTV-STAT-POST-TOTAL-BIT-COUNT:
+
+DTV_STAT_POST_TOTAL_BIT_COUNT
+=============================
+
+Measures the amount of bits received after the inner coding, during the
+same period as
+:ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`
+measurement was taken.
+
+It should be noted that this measurement can be smaller than the total
+amount of bits on the transport stream, as the frontend may need to
+manually restart the measurement, losing some data between each
+measurement interval.
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of bits counted while measuring
+   :ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`.
+
+
+.. _DTV-STAT-ERROR-BLOCK-COUNT:
+
+DTV_STAT_ERROR_BLOCK_COUNT
+==========================
+
+Measures the number of block errors after the outer forward error
+correction coding (after Reed-Solomon or other outer code).
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of error blocks counted after the outer
+   coding.
+
+
+.. _DTV-STAT-TOTAL-BLOCK-COUNT:
+
+DTV-STAT_TOTAL_BLOCK_COUNT
+==========================
+
+Measures the total number of blocks received during the same period as
+:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`
+measurement was taken.
+
+It can be used to calculate the PER indicator, by dividing
+:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>` by
+:ref:`DTV-STAT-TOTAL-BLOCK-COUNT`.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of blocks counted while measuring
+   :ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`.
diff --git a/Documentation/userspace-api/media/dvb/frontend.rst b/Documentation/userspace-api/media/dvb/frontend.rst
new file mode 100644
index 000000000000..41ad519ca502
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dvb_frontend:
+
+#######################
+Digital TV Frontend API
+#######################
+
+The Digital TV frontend API was designed to support three groups of delivery
+systems: Terrestrial, cable and Satellite. Currently, the following
+delivery systems are supported:
+
+-  Terrestrial systems: DVB-T, DVB-T2, ATSC, ATSC M/H, ISDB-T, DVB-H,
+   DTMB, CMMB
+
+-  Cable systems: DVB-C Annex A/C, ClearQAM (DVB-C Annex B)
+
+-  Satellite systems: DVB-S, DVB-S2, DVB Turbo, ISDB-S, DSS
+
+The Digital TV frontend controls several sub-devices including:
+
+-  Tuner
+
+-  Digital TV demodulator
+
+-  Low noise amplifier (LNA)
+
+-  Satellite Equipment Control (SEC) [#f1]_.
+
+The frontend can be accessed through ``/dev/dvb/adapter?/frontend?``.
+Data types and ioctl definitions can be accessed by including
+``linux/dvb/frontend.h`` in your application.
+
+.. note::
+
+   Transmission via the internet (DVB-IP) and MMT (MPEG Media Transport)
+   is not yet handled by this API but a future extension is possible.
+
+.. [#f1]
+
+   On Satellite systems, the API support for the Satellite Equipment
+   Control (SEC) allows to power control and to send/receive signals to
+   control the antenna subsystem, selecting the polarization and choosing
+   the Intermediate Frequency IF) of the Low Noise Block Converter Feed
+   Horn (LNBf). It supports the DiSEqC and V-SEC protocols. The DiSEqC
+   (digital SEC) specification is available at
+   `Eutelsat <http://www.eutelsat.com/satellites/4_5_5.html>`__.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    query-dvb-frontend-info
+    dvb-fe-read-status
+    dvbproperty
+    frontend_fcalls
diff --git a/Documentation/userspace-api/media/dvb/frontend_f_close.rst b/Documentation/userspace-api/media/dvb/frontend_f_close.rst
new file mode 100644
index 000000000000..582e19a83c1a
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend_f_close.rst
@@ -0,0 +1,57 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend_f_close:
+
+***************************
+Digital TV frontend close()
+***************************
+
+Name
+====
+
+fe-close - Close a frontend device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: int close( int fd )
+    :name: dvb-fe-close
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <dvb-fe-open>`.
+
+
+Description
+===========
+
+This system call closes a previously opened front-end device. After
+closing a front-end device, its corresponding hardware might be powered
+down automatically.
+
+
+Return Value
+============
+
+On success 0 is returned.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+Generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/frontend_f_open.rst b/Documentation/userspace-api/media/dvb/frontend_f_open.rst
new file mode 100644
index 000000000000..0be3b249d33b
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend_f_open.rst
@@ -0,0 +1,117 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend_f_open:
+
+***************************
+Digital TV frontend open()
+***************************
+
+Name
+====
+
+fe-open - Open a frontend device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <fcntl.h>
+
+
+.. c:function:: int open( const char *device_name, int flags )
+    :name: dvb-fe-open
+
+Arguments
+=========
+
+``device_name``
+    Device to be opened.
+
+``flags``
+    Open flags. Access can either be ``O_RDWR`` or ``O_RDONLY``.
+
+    Multiple opens are allowed with ``O_RDONLY``. In this mode, only
+    query and read ioctls are allowed.
+
+    Only one open is allowed in ``O_RDWR``. In this mode, all ioctls are
+    allowed.
+
+    When the ``O_NONBLOCK`` flag is given, the system calls may return
+    ``EAGAIN`` error code when no data is available or when the device
+    driver is temporarily busy.
+
+    Other flags have no effect.
+
+
+Description
+===========
+
+This system call opens a named frontend device
+(``/dev/dvb/adapter?/frontend?``) for subsequent use. Usually the first
+thing to do after a successful open is to find out the frontend type
+with :ref:`FE_GET_INFO`.
+
+The device can be opened in read-only mode, which only allows monitoring
+of device status and statistics, or read/write mode, which allows any
+kind of use (e.g. performing tuning operations.)
+
+In a system with multiple front-ends, it is usually the case that
+multiple devices cannot be open in read/write mode simultaneously. As
+long as a front-end device is opened in read/write mode, other open()
+calls in read/write mode will either fail or block, depending on whether
+non-blocking or blocking mode was specified. A front-end device opened
+in blocking mode can later be put into non-blocking mode (and vice
+versa) using the F_SETFL command of the fcntl system call. This is a
+standard system call, documented in the Linux manual page for fcntl.
+When an open() call has succeeded, the device will be ready for use in
+the specified mode. This implies that the corresponding hardware is
+powered up, and that other front-ends may have been powered down to make
+that possible.
+
+
+Return Value
+============
+
+On success :ref:`open() <frontend_f_open>` returns the new file descriptor.
+On error, -1 is returned, and the ``errno`` variable is set appropriately.
+
+Possible error codes are:
+
+
+On success 0 is returned, and :c:type:`ca_slot_info` is filled.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -  - ``EPERM``
+       -  The caller has no permission to access the device.
+
+    -  - ``EBUSY``
+       -  The the device driver is already in use.
+
+    -  - ``EMFILE``
+       -  The process already has the maximum number of files open.
+
+    -  - ``ENFILE``
+       -  The limit on the total number of files open on the system has been
+	  reached.
+
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/frontend_fcalls.rst b/Documentation/userspace-api/media/dvb/frontend_fcalls.rst
new file mode 100644
index 000000000000..2b5e7a4dba9e
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend_fcalls.rst
@@ -0,0 +1,31 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend_fcalls:
+
+#######################
+Frontend Function Calls
+#######################
+
+.. toctree::
+    :maxdepth: 1
+
+    frontend_f_open
+    frontend_f_close
+    fe-get-info
+    fe-read-status
+    fe-get-property
+    fe-diseqc-reset-overload
+    fe-diseqc-send-master-cmd
+    fe-diseqc-recv-slave-reply
+    fe-diseqc-send-burst
+    fe-set-tone
+    fe-set-voltage
+    fe-enable-high-lnb-voltage
+    fe-set-frontend-tune-mode
diff --git a/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst b/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst
new file mode 100644
index 000000000000..1bd804f9b364
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst
@@ -0,0 +1,45 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend_legacy_types:
+
+Frontend Legacy Data Types
+==========================
+
+
+.. toctree::
+    :maxdepth: 1
+
+    fe-type-t
+    fe-bandwidth-t
+    dvb-frontend-parameters
+    dvb-frontend-event
+
+
+.. _frontend_legacy_fcalls:
+
+Frontend Legacy Function Calls
+==============================
+
+Those functions are defined at DVB version 3. The support is kept in the
+kernel due to compatibility issues only. Their usage is strongly not
+recommended
+
+
+.. toctree::
+    :maxdepth: 1
+
+    fe-read-ber
+    fe-read-snr
+    fe-read-signal-strength
+    fe-read-uncorrected-blocks
+    fe-set-frontend
+    fe-get-frontend
+    fe-get-event
+    fe-dishnetwork-send-legacy-cmd
diff --git a/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst b/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst
new file mode 100644
index 000000000000..29ad0f9b90a4
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst
@@ -0,0 +1,25 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _frontend_legacy_dvbv3_api:
+
+***********************************************
+Digital TV Frontend legacy API (a. k. a. DVBv3)
+***********************************************
+
+The usage of this API is deprecated, as it doesn't support all digital
+TV standards, doesn't provide good statistics measurements and provides
+incomplete information. This is kept only to support legacy
+applications.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    frontend_legacy_api
diff --git a/Documentation/userspace-api/media/dvb/headers.rst b/Documentation/userspace-api/media/dvb/headers.rst
new file mode 100644
index 000000000000..ffd8f432484a
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/headers.rst
@@ -0,0 +1,30 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+****************************
+Digital TV uAPI header files
+****************************
+
+Digital TV uAPI headers
+***********************
+
+.. kernel-include:: $BUILDDIR/frontend.h.rst
+
+.. kernel-include:: $BUILDDIR/dmx.h.rst
+
+.. kernel-include:: $BUILDDIR/ca.h.rst
+
+.. kernel-include:: $BUILDDIR/net.h.rst
+
+Legacy uAPI
+***********
+
+.. kernel-include:: $BUILDDIR/audio.h.rst
+
+.. kernel-include:: $BUILDDIR/video.h.rst
diff --git a/Documentation/userspace-api/media/dvb/intro.rst b/Documentation/userspace-api/media/dvb/intro.rst
new file mode 100644
index 000000000000..f1235ef4599e
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/intro.rst
@@ -0,0 +1,190 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dvb_introdution:
+
+************
+Introduction
+************
+
+
+.. _requisites:
+
+What you need to know
+=====================
+
+The reader of this document is required to have some knowledge in the
+area of digital video broadcasting (Digital TV) and should be familiar with
+part I of the MPEG2 specification ISO/IEC 13818 (aka ITU-T H.222), i.e
+you should know what a program/transport stream (PS/TS) is and what is
+meant by a packetized elementary stream (PES) or an I-frame.
+
+Various Digital TV standards documents are available for download at:
+
+- European standards (DVB): http://www.dvb.org and/or http://www.etsi.org.
+- American standards (ATSC): https://www.atsc.org/standards/
+- Japanese standards (ISDB): http://www.dibeg.org/
+
+It is also necessary to know how to access Linux devices and how to
+use ioctl calls. This also includes the knowledge of C or C++.
+
+
+.. _history:
+
+History
+=======
+
+The first API for Digital TV cards we used at Convergence in late 1999 was an
+extension of the Video4Linux API which was primarily developed for frame
+grabber cards. As such it was not really well suited to be used for Digital
+TV cards and their new features like recording MPEG streams and filtering
+several section and PES data streams at the same time.
+
+In early 2000, Convergence was approached by Nokia with a proposal for a new
+standard Linux Digital TV API. As a commitment to the development of terminals
+based on open standards, Nokia and Convergence made it available to all
+Linux developers and published it on https://linuxtv.org in September
+2000. With the Linux driver for the Siemens/Hauppauge DVB PCI card,
+Convergence provided a first implementation of the Linux Digital TV API.
+Convergence was the maintainer of the Linux Digital TV API in the early
+days.
+
+Now, the API is maintained by the LinuxTV community (i.e. you, the reader
+of this document). The Linux  Digital TV API is constantly reviewed and
+improved together with the improvements at the subsystem's core at the
+Kernel.
+
+
+.. _overview:
+
+Overview
+========
+
+
+.. _stb_components:
+
+.. kernel-figure:: dvbstb.svg
+    :alt:   dvbstb.svg
+    :align: center
+
+    Components of a Digital TV card/STB
+
+A Digital TV card or set-top-box (STB) usually consists of the
+following main hardware components:
+
+Frontend consisting of tuner and digital TV demodulator
+   Here the raw signal reaches the digital TV hardware from a satellite dish or
+   antenna or directly from cable. The frontend down-converts and
+   demodulates this signal into an MPEG transport stream (TS). In case
+   of a satellite frontend, this includes a facility for satellite
+   equipment control (SEC), which allows control of LNB polarization,
+   multi feed switches or dish rotors.
+
+Conditional Access (CA) hardware like CI adapters and smartcard slots
+   The complete TS is passed through the CA hardware. Programs to which
+   the user has access (controlled by the smart card) are decoded in
+   real time and re-inserted into the TS.
+
+   .. note::
+
+      Not every digital TV hardware provides conditional access hardware.
+
+Demultiplexer which filters the incoming Digital TV MPEG-TS stream
+   The demultiplexer splits the TS into its components like audio and
+   video streams. Besides usually several of such audio and video
+   streams it also contains data streams with information about the
+   programs offered in this or other streams of the same provider.
+
+Audio and video decoder
+   The main targets of the demultiplexer are audio and video
+   decoders. After decoding, they pass on the uncompressed audio and
+   video to the computer screen or to a TV set.
+
+   .. note::
+
+      Modern hardware usually doesn't have a separate decoder hardware, as
+      such functionality can be provided by the main CPU, by the graphics
+      adapter of the system or by a signal processing hardware embedded on
+      a Systems on a Chip (SoC) integrated circuit.
+
+      It may also not be needed for certain usages (e.g. for data-only
+      uses like “internet over satellite”).
+
+:ref:`stb_components` shows a crude schematic of the control and data
+flow between those components.
+
+
+
+.. _dvb_devices:
+
+Linux Digital TV Devices
+========================
+
+The Linux Digital TV API lets you control these hardware components through
+currently six Unix-style character devices for video, audio, frontend,
+demux, CA and IP-over-DVB networking. The video and audio devices
+control the MPEG2 decoder hardware, the frontend device the tuner and
+the Digital TV demodulator. The demux device gives you control over the PES
+and section filters of the hardware. If the hardware does not support
+filtering these filters can be implemented in software. Finally, the CA
+device controls all the conditional access capabilities of the hardware.
+It can depend on the individual security requirements of the platform,
+if and how many of the CA functions are made available to the
+application through this device.
+
+All devices can be found in the ``/dev`` tree under ``/dev/dvb``. The
+individual devices are called:
+
+-  ``/dev/dvb/adapterN/audioM``,
+
+-  ``/dev/dvb/adapterN/videoM``,
+
+-  ``/dev/dvb/adapterN/frontendM``,
+
+-  ``/dev/dvb/adapterN/netM``,
+
+-  ``/dev/dvb/adapterN/demuxM``,
+
+-  ``/dev/dvb/adapterN/dvrM``,
+
+-  ``/dev/dvb/adapterN/caM``,
+
+where ``N`` enumerates the Digital TV cards in a system starting from 0, and
+``M`` enumerates the devices of each type within each adapter, starting
+from 0, too. We will omit the “``/dev/dvb/adapterN/``\ ” in the further
+discussion of these devices.
+
+More details about the data structures and function calls of all the
+devices are described in the following chapters.
+
+
+.. _include_files:
+
+API include files
+=================
+
+For each of the Digital TV devices a corresponding include file exists. The
+Digital TV API include files should be included in application sources with a
+partial path like:
+
+
+.. code-block:: c
+
+	#include <linux/dvb/ca.h>
+
+	#include <linux/dvb/dmx.h>
+
+	#include <linux/dvb/frontend.h>
+
+	#include <linux/dvb/net.h>
+
+
+To enable applications to support different API version, an additional
+include file ``linux/dvb/version.h`` exists, which defines the constant
+``DVB_API_VERSION``. This document describes ``DVB_API_VERSION 5.10``.
diff --git a/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst b/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst
new file mode 100644
index 000000000000..17c3b062afb3
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst
@@ -0,0 +1,39 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _legacy_dvb_apis:
+
+***************************
+Digital TV Deprecated APIs
+***************************
+
+The APIs described here **should not** be used on new drivers or applications.
+
+The DVBv3 frontend API has issues with new delivery systems, including
+DVB-S2, DVB-T2, ISDB, etc.
+
+There's just one driver for a very legacy hardware using the Digital TV
+audio and video APIs. No modern drivers should use it. Instead, audio and
+video should be using the V4L2 and ALSA APIs, and the pipelines should
+be set via the Media Controller API.
+
+.. attention::
+
+   The APIs described here doesn't necessarily reflect the current
+   code implementation, as this section of the document was written
+   for DVB version 1, while the code reflects DVB version 3
+   implementation.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    frontend_legacy_dvbv3_api
+    video
+    audio
diff --git a/Documentation/userspace-api/media/dvb/net-add-if.rst b/Documentation/userspace-api/media/dvb/net-add-if.rst
new file mode 100644
index 000000000000..e75ec4d80a08
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/net-add-if.rst
@@ -0,0 +1,60 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _NET_ADD_IF:
+
+****************
+ioctl NET_ADD_IF
+****************
+
+Name
+====
+
+NET_ADD_IF - Creates a new network interface for a given Packet ID.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, NET_ADD_IF, struct dvb_net_if *net_if )
+    :name: NET_ADD_IF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``net_if``
+    pointer to struct :c:type:`dvb_net_if`
+
+
+Description
+===========
+
+The NET_ADD_IF ioctl system call selects the Packet ID (PID) that
+contains a TCP/IP traffic, the type of encapsulation to be used (MPE or
+ULE) and the interface number for the new interface to be created. When
+the system call successfully returns, a new virtual network interface is
+created.
+
+The struct :c:type:`dvb_net_if`::ifnum field will be
+filled with the number of the created interface.
+
+Return Value
+============
+
+On success 0 is returned, and :c:type:`ca_slot_info` is filled.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/net-get-if.rst b/Documentation/userspace-api/media/dvb/net-get-if.rst
new file mode 100644
index 000000000000..c5421d9a8c0b
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/net-get-if.rst
@@ -0,0 +1,59 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _NET_GET_IF:
+
+****************
+ioctl NET_GET_IF
+****************
+
+Name
+====
+
+NET_GET_IF - Read the configuration data of an interface created via - :ref:`NET_ADD_IF <net>`.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, NET_GET_IF, struct dvb_net_if *net_if )
+    :name: NET_GET_IF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``net_if``
+    pointer to struct :c:type:`dvb_net_if`
+
+
+Description
+===========
+
+The NET_GET_IF ioctl uses the interface number given by the struct
+:c:type:`dvb_net_if`::ifnum field and fills the content of
+struct :c:type:`dvb_net_if` with the packet ID and
+encapsulation type used on such interface. If the interface was not
+created yet with :ref:`NET_ADD_IF <net>`, it will return -1 and fill
+the ``errno`` with ``EINVAL`` error code.
+
+
+Return Value
+============
+
+On success 0 is returned, and :c:type:`ca_slot_info` is filled.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/net-remove-if.rst b/Documentation/userspace-api/media/dvb/net-remove-if.rst
new file mode 100644
index 000000000000..d530559f66f1
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/net-remove-if.rst
@@ -0,0 +1,55 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _NET_REMOVE_IF:
+
+*******************
+ioctl NET_REMOVE_IF
+*******************
+
+Name
+====
+
+NET_REMOVE_IF - Removes a network interface.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, NET_REMOVE_IF, int ifnum )
+    :name: NET_REMOVE_IF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``net_if``
+    number of the interface to be removed
+
+
+Description
+===========
+
+The NET_REMOVE_IF ioctl deletes an interface previously created via
+:ref:`NET_ADD_IF <net>`.
+
+
+Return Value
+============
+
+On success 0 is returned, and :c:type:`ca_slot_info` is filled.
+
+On error -1 is returned, and the ``errno`` variable is set
+appropriately.
+
+The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/net-types.rst b/Documentation/userspace-api/media/dvb/net-types.rst
new file mode 100644
index 000000000000..94323cffe8af
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/net-types.rst
@@ -0,0 +1,16 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _net_types:
+
+**************
+Net Data Types
+**************
+
+.. kernel-doc:: include/uapi/linux/dvb/net.h
diff --git a/Documentation/userspace-api/media/dvb/net.rst b/Documentation/userspace-api/media/dvb/net.rst
new file mode 100644
index 000000000000..084f33d1ba28
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/net.rst
@@ -0,0 +1,48 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _net:
+
+######################
+Digital TV Network API
+######################
+
+The Digital TV net device controls the mapping of data packages that are part
+of a transport stream to be mapped into a virtual network interface,
+visible through the standard Linux network protocol stack.
+
+Currently, two encapsulations are supported:
+
+-  `Multi Protocol Encapsulation (MPE) <http://en.wikipedia.org/wiki/Multiprotocol_Encapsulation>`__
+
+-  `Ultra Lightweight Encapsulation (ULE) <http://en.wikipedia.org/wiki/Unidirectional_Lightweight_Encapsulation>`__
+
+In order to create the Linux virtual network interfaces, an application
+needs to tell to the Kernel what are the PIDs and the encapsulation
+types that are present on the transport stream. This is done through
+``/dev/dvb/adapter?/net?`` device node. The data will be available via
+virtual ``dvb?_?`` network interfaces, and will be controlled/routed via
+the standard ip tools (like ip, route, netstat, ifconfig, etc).
+
+Data types and and ioctl definitions are defined via ``linux/dvb/net.h``
+header.
+
+
+.. _net_fcalls:
+
+Digital TV net Function Calls
+#############################
+
+.. toctree::
+    :maxdepth: 1
+
+    net-types
+    net-add-if
+    net-remove-if
+    net-get-if
diff --git a/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst b/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst
new file mode 100644
index 000000000000..d854ccf42ccf
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst
@@ -0,0 +1,20 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _query-dvb-frontend-info:
+
+*****************************
+Querying frontend information
+*****************************
+
+Usually, the first thing to do when the frontend is opened is to check
+the frontend capabilities. This is done using
+:ref:`FE_GET_INFO`. This ioctl will enumerate the
+Digital TV API version and other characteristics about the frontend, and can
+be opened either in read only or read/write mode.
diff --git a/Documentation/userspace-api/media/dvb/video-clear-buffer.rst b/Documentation/userspace-api/media/dvb/video-clear-buffer.rst
new file mode 100644
index 000000000000..ba7a13302862
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-clear-buffer.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_CLEAR_BUFFER:
+
+==================
+VIDEO_CLEAR_BUFFER
+==================
+
+Name
+----
+
+VIDEO_CLEAR_BUFFER
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_CLEAR_BUFFER)
+    :name: VIDEO_CLEAR_BUFFER
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_CLEAR_BUFFER for this command.
+
+
+Description
+-----------
+
+This ioctl call clears all video buffers in the driver and in the
+decoder hardware.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-command.rst b/Documentation/userspace-api/media/dvb/video-command.rst
new file mode 100644
index 000000000000..d96d764d0eef
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-command.rst
@@ -0,0 +1,105 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_COMMAND:
+
+=============
+VIDEO_COMMAND
+=============
+
+Name
+----
+
+VIDEO_COMMAND
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, VIDEO_COMMAND, struct video_command *cmd)
+    :name: VIDEO_COMMAND
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_COMMAND for this command.
+
+    -  .. row 3
+
+       -  struct video_command \*cmd
+
+       -  Commands the decoder.
+
+
+Description
+-----------
+
+This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
+this ioctl has been replaced by the
+:ref:`VIDIOC_DECODER_CMD` ioctl.
+
+This ioctl commands the decoder. The ``video_command`` struct is a
+subset of the ``v4l2_decoder_cmd`` struct, so refer to the
+:ref:`VIDIOC_DECODER_CMD` documentation for
+more information.
+
+.. c:type:: struct video_command
+
+.. code-block:: c
+
+	/* The structure must be zeroed before use by the application
+	This ensures it can be extended safely in the future. */
+	struct video_command {
+		__u32 cmd;
+		__u32 flags;
+		union {
+			struct {
+				__u64 pts;
+			} stop;
+
+			struct {
+				/* 0 or 1000 specifies normal speed,
+				1 specifies forward single stepping,
+				-1 specifies backward single stepping,
+				>1: playback at speed/1000 of the normal speed,
+				<-1: reverse playback at (-speed/1000) of the normal speed. */
+				__s32 speed;
+				__u32 format;
+			} play;
+
+			struct {
+				__u32 data[16];
+			} raw;
+		};
+	};
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-continue.rst b/Documentation/userspace-api/media/dvb/video-continue.rst
new file mode 100644
index 000000000000..bb18514ac5e9
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-continue.rst
@@ -0,0 +1,66 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_CONTINUE:
+
+==============
+VIDEO_CONTINUE
+==============
+
+Name
+----
+
+VIDEO_CONTINUE
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_CONTINUE)
+    :name: VIDEO_CONTINUE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_CONTINUE for this command.
+
+
+Description
+-----------
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
+
+This ioctl call restarts decoding and playing processes of the video
+stream which was played before a call to VIDEO_FREEZE was made.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-fast-forward.rst b/Documentation/userspace-api/media/dvb/video-fast-forward.rst
new file mode 100644
index 000000000000..1f6ec89574d1
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-fast-forward.rst
@@ -0,0 +1,83 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_FAST_FORWARD:
+
+==================
+VIDEO_FAST_FORWARD
+==================
+
+Name
+----
+
+VIDEO_FAST_FORWARD
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_FAST_FORWARD, int nFrames)
+    :name: VIDEO_FAST_FORWARD
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_FAST_FORWARD for this command.
+
+    -  .. row 3
+
+       -  int nFrames
+
+       -  The number of frames to skip.
+
+
+Description
+-----------
+
+This ioctl call asks the Video Device to skip decoding of N number of
+I-frames. This call can only be used if VIDEO_SOURCE_MEMORY is
+selected.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EPERM``
+
+       -  Mode VIDEO_SOURCE_MEMORY not selected.
diff --git a/Documentation/userspace-api/media/dvb/video-fclose.rst b/Documentation/userspace-api/media/dvb/video-fclose.rst
new file mode 100644
index 000000000000..f9d2a8ebe4a4
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-fclose.rst
@@ -0,0 +1,62 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _video_fclose:
+
+=================
+dvb video close()
+=================
+
+Name
+----
+
+dvb video close()
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int close(int fd)
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+Description
+-----------
+
+This system call closes a previously opened video device.
+
+
+Return Value
+------------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
diff --git a/Documentation/userspace-api/media/dvb/video-fopen.rst b/Documentation/userspace-api/media/dvb/video-fopen.rst
new file mode 100644
index 000000000000..a418cf6d772e
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-fopen.rst
@@ -0,0 +1,122 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _video_fopen:
+
+================
+dvb video open()
+================
+
+Name
+----
+
+dvb video open()
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int open(const char *deviceName, int flags)
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  const char \*deviceName
+
+       -  Name of specific video device.
+
+    -  .. row 2
+
+       -  int flags
+
+       -  A bit-wise OR of the following flags:
+
+    -  .. row 3
+
+       -
+       -  O_RDONLY read-only access
+
+    -  .. row 4
+
+       -
+       -  O_RDWR read/write access
+
+    -  .. row 5
+
+       -
+       -  O_NONBLOCK open in non-blocking mode
+
+    -  .. row 6
+
+       -
+       -  (blocking mode is the default)
+
+
+Description
+-----------
+
+This system call opens a named video device (e.g.
+/dev/dvb/adapter0/video0) for subsequent use.
+
+When an open() call has succeeded, the device will be ready for use. The
+significance of blocking or non-blocking mode is described in the
+documentation for functions where there is a difference. It does not
+affect the semantics of the open() call itself. A device opened in
+blocking mode can later be put into non-blocking mode (and vice versa)
+using the F_SETFL command of the fcntl system call. This is a standard
+system call, documented in the Linux manual page for fcntl. Only one
+user can open the Video Device in O_RDWR mode. All other attempts to
+open the device in this mode will fail, and an error-code will be
+returned. If the Video Device is opened in O_RDONLY mode, the only
+ioctl call that can be used is VIDEO_GET_STATUS. All other call will
+return an error code.
+
+
+Return Value
+------------
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``ENODEV``
+
+       -  Device driver not loaded/available.
+
+    -  .. row 2
+
+       -  ``EINTERNAL``
+
+       -  Internal error.
+
+    -  .. row 3
+
+       -  ``EBUSY``
+
+       -  Device or resource busy.
+
+    -  .. row 4
+
+       -  ``EINVAL``
+
+       -  Invalid argument.
diff --git a/Documentation/userspace-api/media/dvb/video-freeze.rst b/Documentation/userspace-api/media/dvb/video-freeze.rst
new file mode 100644
index 000000000000..46f287faa7fe
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-freeze.rst
@@ -0,0 +1,70 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_FREEZE:
+
+============
+VIDEO_FREEZE
+============
+
+Name
+----
+
+VIDEO_FREEZE
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_FREEZE)
+    :name: VIDEO_FREEZE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_FREEZE for this command.
+
+
+Description
+-----------
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
+
+This ioctl call suspends the live video stream being played. Decoding
+and playing are frozen. It is then possible to restart the decoding and
+playing process of the video stream using the VIDEO_CONTINUE command.
+If VIDEO_SOURCE_MEMORY is selected in the ioctl call
+VIDEO_SELECT_SOURCE, the Digital TV subsystem will not decode any more data
+until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-fwrite.rst b/Documentation/userspace-api/media/dvb/video-fwrite.rst
new file mode 100644
index 000000000000..08dfafa9c6a1
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-fwrite.rst
@@ -0,0 +1,90 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _video_fwrite:
+
+=================
+dvb video write()
+=================
+
+Name
+----
+
+dvb video write()
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: size_t write(int fd, const void *buf, size_t count)
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  void \*buf
+
+       -  Pointer to the buffer containing the PES data.
+
+    -  .. row 3
+
+       -  size_t count
+
+       -  Size of buf.
+
+
+Description
+-----------
+
+This system call can only be used if VIDEO_SOURCE_MEMORY is selected
+in the ioctl call VIDEO_SELECT_SOURCE. The data provided shall be in
+PES format, unless the capability allows other formats. If O_NONBLOCK
+is not specified the function will block until buffer space is
+available. The amount of data to be transferred is implied by count.
+
+
+Return Value
+------------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EPERM``
+
+       -  Mode VIDEO_SOURCE_MEMORY not selected.
+
+    -  .. row 2
+
+       -  ``ENOMEM``
+
+       -  Attempted to write more data than the internal buffer can hold.
+
+    -  .. row 3
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
diff --git a/Documentation/userspace-api/media/dvb/video-get-capabilities.rst b/Documentation/userspace-api/media/dvb/video-get-capabilities.rst
new file mode 100644
index 000000000000..f6f19df5a3b4
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-get-capabilities.rst
@@ -0,0 +1,70 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_GET_CAPABILITIES:
+
+======================
+VIDEO_GET_CAPABILITIES
+======================
+
+Name
+----
+
+VIDEO_GET_CAPABILITIES
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_GET_CAPABILITIES, unsigned int *cap)
+    :name: VIDEO_GET_CAPABILITIES
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_CAPABILITIES for this command.
+
+    -  .. row 3
+
+       -  unsigned int \*cap
+
+       -  Pointer to a location where to store the capability information.
+
+
+Description
+-----------
+
+This ioctl call asks the video device about its decoding capabilities.
+On success it returns and integer which has bits set according to the
+defines in section ??.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-get-event.rst b/Documentation/userspace-api/media/dvb/video-get-event.rst
new file mode 100644
index 000000000000..6db8e6337c4f
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-get-event.rst
@@ -0,0 +1,114 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_GET_EVENT:
+
+===============
+VIDEO_GET_EVENT
+===============
+
+Name
+----
+
+VIDEO_GET_EVENT
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_GET_EVENT, struct video_event *ev)
+    :name: VIDEO_GET_EVENT
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_EVENT for this command.
+
+    -  .. row 3
+
+       -  struct video_event \*ev
+
+       -  Points to the location where the event, if any, is to be stored.
+
+
+Description
+-----------
+
+This ioctl is for Digital TV devices only. To get events from a V4L2 decoder
+use the V4L2 :ref:`VIDIOC_DQEVENT` ioctl instead.
+
+This ioctl call returns an event of type video_event if available. If
+an event is not available, the behavior depends on whether the device is
+in blocking or non-blocking mode. In the latter case, the call fails
+immediately with errno set to ``EWOULDBLOCK``. In the former case, the call
+blocks until an event becomes available. The standard Linux poll()
+and/or select() system calls can be used with the device file descriptor
+to watch for new events. For select(), the file descriptor should be
+included in the exceptfds argument, and for poll(), POLLPRI should be
+specified as the wake-up condition. Read-only permissions are sufficient
+for this ioctl call.
+
+.. c:type:: video_event
+
+.. code-block:: c
+
+	struct video_event {
+		__s32 type;
+	#define VIDEO_EVENT_SIZE_CHANGED	1
+	#define VIDEO_EVENT_FRAME_RATE_CHANGED	2
+	#define VIDEO_EVENT_DECODER_STOPPED 	3
+	#define VIDEO_EVENT_VSYNC 		4
+		long timestamp;
+		union {
+			video_size_t size;
+			unsigned int frame_rate;	/* in frames per 1000sec */
+			unsigned char vsync_field;	/* unknown/odd/even/progressive */
+		} u;
+	};
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EWOULDBLOCK``
+
+       -  There is no event pending, and the device is in non-blocking mode.
+
+    -  .. row 2
+
+       -  ``EOVERFLOW``
+
+       -  Overflow in event queue - one or more events were lost.
diff --git a/Documentation/userspace-api/media/dvb/video-get-frame-count.rst b/Documentation/userspace-api/media/dvb/video-get-frame-count.rst
new file mode 100644
index 000000000000..4152a42daeb3
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-get-frame-count.rst
@@ -0,0 +1,74 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_GET_FRAME_COUNT:
+
+=====================
+VIDEO_GET_FRAME_COUNT
+=====================
+
+Name
+----
+
+VIDEO_GET_FRAME_COUNT
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, VIDEO_GET_FRAME_COUNT, __u64 *pts)
+    :name: VIDEO_GET_FRAME_COUNT
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_FRAME_COUNT for this command.
+
+    -  .. row 3
+
+       -  __u64 \*pts
+
+       -  Returns the number of frames displayed since the decoder was
+	  started.
+
+
+Description
+-----------
+
+This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
+this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_FRAME``
+control.
+
+This ioctl call asks the Video Device to return the number of displayed
+frames since the decoder was started.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-get-pts.rst b/Documentation/userspace-api/media/dvb/video-get-pts.rst
new file mode 100644
index 000000000000..f957df792ae1
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-get-pts.rst
@@ -0,0 +1,78 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_GET_PTS:
+
+=============
+VIDEO_GET_PTS
+=============
+
+Name
+----
+
+VIDEO_GET_PTS
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, VIDEO_GET_PTS, __u64 *pts)
+    :name: VIDEO_GET_PTS
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_PTS for this command.
+
+    -  .. row 3
+
+       -  __u64 \*pts
+
+       -  Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 /
+	  ISO/IEC 13818-1.
+
+	  The PTS should belong to the currently played frame if possible,
+	  but may also be a value close to it like the PTS of the last
+	  decoded frame or the last PTS extracted by the PES parser.
+
+
+Description
+-----------
+
+This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
+this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_PTS``
+control.
+
+This ioctl call asks the Video Device to return the current PTS
+timestamp.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-get-size.rst b/Documentation/userspace-api/media/dvb/video-get-size.rst
new file mode 100644
index 000000000000..376745550eb5
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-get-size.rst
@@ -0,0 +1,78 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_GET_SIZE:
+
+==============
+VIDEO_GET_SIZE
+==============
+
+Name
+----
+
+VIDEO_GET_SIZE
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, VIDEO_GET_SIZE, video_size_t *size)
+    :name: VIDEO_GET_SIZE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_SIZE for this command.
+
+    -  .. row 3
+
+       -  video_size_t \*size
+
+       -  Returns the size and aspect ratio.
+
+
+Description
+-----------
+
+This ioctl returns the size and aspect ratio.
+
+.. c:type:: video_size_t
+
+.. code-block::c
+
+	typedef struct {
+		int w;
+		int h;
+		video_format_t aspect_ratio;
+	} video_size_t;
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-get-status.rst b/Documentation/userspace-api/media/dvb/video-get-status.rst
new file mode 100644
index 000000000000..d0172593e557
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-get-status.rst
@@ -0,0 +1,80 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_GET_STATUS:
+
+================
+VIDEO_GET_STATUS
+================
+
+Name
+----
+
+VIDEO_GET_STATUS
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_GET_STATUS, struct video_status *status)
+    :name: VIDEO_GET_STATUS
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_STATUS for this command.
+
+    -  .. row 3
+
+       -  struct video_status \*status
+
+       -  Returns the current status of the Video Device.
+
+
+Description
+-----------
+
+This ioctl call asks the Video Device to return the current status of
+the device.
+
+.. c:type:: video_status
+
+.. code-block:: c
+
+	struct video_status {
+		int                   video_blank;   /* blank video on freeze? */
+		video_play_state_t    play_state;    /* current state of playback */
+		video_stream_source_t stream_source; /* current source (demux/memory) */
+		video_format_t        video_format;  /* current aspect ratio of stream*/
+		video_displayformat_t display_format;/* selected cropping mode */
+	};
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-play.rst b/Documentation/userspace-api/media/dvb/video-play.rst
new file mode 100644
index 000000000000..2b6b4e93bd93
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-play.rst
@@ -0,0 +1,66 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_PLAY:
+
+==========
+VIDEO_PLAY
+==========
+
+Name
+----
+
+VIDEO_PLAY
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_PLAY)
+    :name: VIDEO_PLAY
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_PLAY for this command.
+
+
+Description
+-----------
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
+
+This ioctl call asks the Video Device to start playing a video stream
+from the selected source.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-select-source.rst b/Documentation/userspace-api/media/dvb/video-select-source.rst
new file mode 100644
index 000000000000..504f768da00c
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-select-source.rst
@@ -0,0 +1,84 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_SELECT_SOURCE:
+
+===================
+VIDEO_SELECT_SOURCE
+===================
+
+Name
+----
+
+VIDEO_SELECT_SOURCE
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_SELECT_SOURCE, video_stream_source_t source)
+    :name: VIDEO_SELECT_SOURCE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SELECT_SOURCE for this command.
+
+    -  .. row 3
+
+       -  video_stream_source_t source
+
+       -  Indicates which source shall be used for the Video stream.
+
+
+Description
+-----------
+
+This ioctl is for Digital TV devices only. This ioctl was also supported by the
+V4L2 ivtv driver, but that has been replaced by the ivtv-specific
+``IVTV_IOC_PASSTHROUGH_MODE`` ioctl.
+
+This ioctl call informs the video device which source shall be used for
+the input data. The possible sources are demux or memory. If memory is
+selected, the data is fed to the video device through the write command.
+
+.. c:type:: video_stream_source_t
+
+.. code-block:: c
+
+	typedef enum {
+		VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
+		VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
+				comes from the user through the write
+				system call */
+	} video_stream_source_t;
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-set-blank.rst b/Documentation/userspace-api/media/dvb/video-set-blank.rst
new file mode 100644
index 000000000000..a2608df94d3e
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-set-blank.rst
@@ -0,0 +1,73 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_SET_BLANK:
+
+===============
+VIDEO_SET_BLANK
+===============
+
+Name
+----
+
+VIDEO_SET_BLANK
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_SET_BLANK, boolean mode)
+    :name: VIDEO_SET_BLANK
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_BLANK for this command.
+
+    -  .. row 3
+
+       -  boolean mode
+
+       -  TRUE: Blank screen when stop.
+
+    -  .. row 4
+
+       -
+       -  FALSE: Show last decoded frame.
+
+
+Description
+-----------
+
+This ioctl call asks the Video Device to blank out the picture.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-set-display-format.rst b/Documentation/userspace-api/media/dvb/video-set-display-format.rst
new file mode 100644
index 000000000000..c587b3d15e30
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-set-display-format.rst
@@ -0,0 +1,69 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_SET_DISPLAY_FORMAT:
+
+========================
+VIDEO_SET_DISPLAY_FORMAT
+========================
+
+Name
+----
+
+VIDEO_SET_DISPLAY_FORMAT
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_SET_DISPLAY_FORMAT)
+    :name: VIDEO_SET_DISPLAY_FORMAT
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_DISPLAY_FORMAT for this command.
+
+    -  .. row 3
+
+       -  video_display_format_t format
+
+       -  Selects the video format to be used.
+
+
+Description
+-----------
+
+This ioctl call asks the Video Device to select the video format to be
+applied by the MPEG chip on the video.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-set-format.rst b/Documentation/userspace-api/media/dvb/video-set-format.rst
new file mode 100644
index 000000000000..ced74edb74eb
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-set-format.rst
@@ -0,0 +1,92 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_SET_FORMAT:
+
+================
+VIDEO_SET_FORMAT
+================
+
+Name
+----
+
+VIDEO_SET_FORMAT
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_SET_FORMAT, video_format_t format)
+    :name: VIDEO_SET_FORMAT
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_FORMAT for this command.
+
+    -  .. row 3
+
+       -  video_format_t format
+
+       -  video format of TV as defined in section ??.
+
+
+Description
+-----------
+
+This ioctl sets the screen format (aspect ratio) of the connected output
+device (TV) so that the output of the decoder can be adjusted
+accordingly.
+
+.. c:type:: video_format_t
+
+.. code-block:: c
+
+	typedef enum {
+		VIDEO_FORMAT_4_3,     /* Select 4:3 format */
+		VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
+		VIDEO_FORMAT_221_1    /* 2.21:1 */
+	} video_format_t;
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  format is not a valid video format.
diff --git a/Documentation/userspace-api/media/dvb/video-set-streamtype.rst b/Documentation/userspace-api/media/dvb/video-set-streamtype.rst
new file mode 100644
index 000000000000..1729bc04e4f7
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-set-streamtype.rst
@@ -0,0 +1,70 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_SET_STREAMTYPE:
+
+====================
+VIDEO_SET_STREAMTYPE
+====================
+
+Name
+----
+
+VIDEO_SET_STREAMTYPE
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_SET_STREAMTYPE, int type)
+    :name: VIDEO_SET_STREAMTYPE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_STREAMTYPE for this command.
+
+    -  .. row 3
+
+       -  int type
+
+       -  stream type
+
+
+Description
+-----------
+
+This ioctl tells the driver which kind of stream to expect being written
+to it. If this call is not used the default of video PES is used. Some
+drivers might not support this call and always expect PES.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-slowmotion.rst b/Documentation/userspace-api/media/dvb/video-slowmotion.rst
new file mode 100644
index 000000000000..b8cfba7bbfb3
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-slowmotion.rst
@@ -0,0 +1,83 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_SLOWMOTION:
+
+================
+VIDEO_SLOWMOTION
+================
+
+Name
+----
+
+VIDEO_SLOWMOTION
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_SLOWMOTION, int nFrames)
+    :name: VIDEO_SLOWMOTION
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SLOWMOTION for this command.
+
+    -  .. row 3
+
+       -  int nFrames
+
+       -  The number of times to repeat each frame.
+
+
+Description
+-----------
+
+This ioctl call asks the video device to repeat decoding frames N number
+of times. This call can only be used if VIDEO_SOURCE_MEMORY is
+selected.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EPERM``
+
+       -  Mode VIDEO_SOURCE_MEMORY not selected.
diff --git a/Documentation/userspace-api/media/dvb/video-stillpicture.rst b/Documentation/userspace-api/media/dvb/video-stillpicture.rst
new file mode 100644
index 000000000000..5432619a63a1
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-stillpicture.rst
@@ -0,0 +1,70 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_STILLPICTURE:
+
+==================
+VIDEO_STILLPICTURE
+==================
+
+Name
+----
+
+VIDEO_STILLPICTURE
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_STILLPICTURE, struct video_still_picture *sp)
+    :name: VIDEO_STILLPICTURE
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_STILLPICTURE for this command.
+
+    -  .. row 3
+
+       -  struct video_still_picture \*sp
+
+       -  Pointer to a location where an I-frame and size is stored.
+
+
+Description
+-----------
+
+This ioctl call asks the Video Device to display a still picture
+(I-frame). The input data shall contain an I-frame. If the pointer is
+NULL, then the current displayed still picture is blanked.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-stop.rst b/Documentation/userspace-api/media/dvb/video-stop.rst
new file mode 100644
index 000000000000..9a53fe7f2fd0
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-stop.rst
@@ -0,0 +1,83 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_STOP:
+
+==========
+VIDEO_STOP
+==========
+
+Name
+----
+
+VIDEO_STOP
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, VIDEO_STOP, boolean mode)
+    :name: VIDEO_STOP
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_STOP for this command.
+
+    -  .. row 3
+
+       -  Boolean mode
+
+       -  Indicates how the screen shall be handled.
+
+    -  .. row 4
+
+       -
+       -  TRUE: Blank screen when stop.
+
+    -  .. row 5
+
+       -
+       -  FALSE: Show last decoded frame.
+
+
+Description
+-----------
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
+
+This ioctl call asks the Video Device to stop playing the current
+stream. Depending on the input parameter, the screen can be blanked out
+or displaying the last decoded frame.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video-try-command.rst b/Documentation/userspace-api/media/dvb/video-try-command.rst
new file mode 100644
index 000000000000..61667952030f
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video-try-command.rst
@@ -0,0 +1,75 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDEO_TRY_COMMAND:
+
+=================
+VIDEO_TRY_COMMAND
+=================
+
+Name
+----
+
+VIDEO_TRY_COMMAND
+
+.. attention:: This ioctl is deprecated.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, VIDEO_TRY_COMMAND, struct video_command *cmd)
+    :name: VIDEO_TRY_COMMAND
+
+
+Arguments
+---------
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_TRY_COMMAND for this command.
+
+    -  .. row 3
+
+       -  struct video_command \*cmd
+
+       -  Try a decoder command.
+
+
+Description
+-----------
+
+This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
+this ioctl has been replaced by the
+:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` ioctl.
+
+This ioctl tries a decoder command. The ``video_command`` struct is a
+subset of the ``v4l2_decoder_cmd`` struct, so refer to the
+:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` documentation
+for more information.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/dvb/video.rst b/Documentation/userspace-api/media/dvb/video.rst
new file mode 100644
index 000000000000..537eae1b0723
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video.rst
@@ -0,0 +1,43 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dvb_video:
+
+#######################
+Digital TV Video Device
+#######################
+
+The Digital TV video device controls the MPEG2 video decoder of the Digital
+TV hardware. It can be accessed through **/dev/dvb/adapter0/video0**. Data
+types and and ioctl definitions can be accessed by including
+**linux/dvb/video.h** in your application.
+
+Note that the Digital TV video device only controls decoding of the MPEG video
+stream, not its presentation on the TV or computer screen. On PCs this
+is typically handled by an associated video4linux device, e.g.
+**/dev/video**, which allows scaling and defining output windows.
+
+Some Digital TV cards don’t have their own MPEG decoder, which results in the
+omission of the audio and video device as well as the video4linux
+device.
+
+The ioctls that deal with SPUs (sub picture units) and navigation
+packets are only supported on some MPEG decoders made for DVD playback.
+
+These ioctls were also used by V4L2 to control MPEG decoders implemented
+in V4L2. The use of these ioctls for that purpose has been made obsolete
+and proper V4L2 ioctls or controls have been created to replace that
+functionality.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    video_types
+    video_function_calls
diff --git a/Documentation/userspace-api/media/dvb/video_function_calls.rst b/Documentation/userspace-api/media/dvb/video_function_calls.rst
new file mode 100644
index 000000000000..4902a40d65ba
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video_function_calls.rst
@@ -0,0 +1,42 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _video_function_calls:
+
+********************
+Video Function Calls
+********************
+
+.. toctree::
+    :maxdepth: 1
+
+    video-fopen
+    video-fclose
+    video-fwrite
+    video-stop
+    video-play
+    video-freeze
+    video-continue
+    video-select-source
+    video-set-blank
+    video-get-status
+    video-get-frame-count
+    video-get-pts
+    video-get-event
+    video-command
+    video-try-command
+    video-get-size
+    video-set-display-format
+    video-stillpicture
+    video-fast-forward
+    video-slowmotion
+    video-get-capabilities
+    video-clear-buffer
+    video-set-streamtype
+    video-set-format
diff --git a/Documentation/userspace-api/media/dvb/video_types.rst b/Documentation/userspace-api/media/dvb/video_types.rst
new file mode 100644
index 000000000000..bdba1d48f647
--- /dev/null
+++ b/Documentation/userspace-api/media/dvb/video_types.rst
@@ -0,0 +1,255 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _video_types:
+
+****************
+Video Data Types
+****************
+
+
+.. _video-format-t:
+
+video_format_t
+==============
+
+The ``video_format_t`` data type defined by
+
+
+.. code-block:: c
+
+    typedef enum {
+	VIDEO_FORMAT_4_3,     /* Select 4:3 format */
+	VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
+	VIDEO_FORMAT_221_1    /* 2.21:1 */
+    } video_format_t;
+
+is used in the VIDEO_SET_FORMAT function (??) to tell the driver which
+aspect ratio the output hardware (e.g. TV) has. It is also used in the
+data structures video_status (??) returned by VIDEO_GET_STATUS (??)
+and video_event (??) returned by VIDEO_GET_EVENT (??) which report
+about the display format of the current video stream.
+
+
+.. _video-displayformat-t:
+
+video_displayformat_t
+=====================
+
+In case the display format of the video stream and of the display
+hardware differ the application has to specify how to handle the
+cropping of the picture. This can be done using the
+VIDEO_SET_DISPLAY_FORMAT call (??) which accepts
+
+
+.. code-block:: c
+
+    typedef enum {
+	VIDEO_PAN_SCAN,       /* use pan and scan format */
+	VIDEO_LETTER_BOX,     /* use letterbox format */
+	VIDEO_CENTER_CUT_OUT  /* use center cut out format */
+    } video_displayformat_t;
+
+as argument.
+
+
+.. _video-stream-source-t:
+
+video_stream_source_t
+=====================
+
+The video stream source is set through the VIDEO_SELECT_SOURCE call
+and can take the following values, depending on whether we are replaying
+from an internal (demuxer) or external (user write) source.
+
+
+.. code-block:: c
+
+    typedef enum {
+	VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
+	VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
+		       comes from the user through the write
+		       system call */
+    } video_stream_source_t;
+
+VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the
+frontend or the DVR device) as the source of the video stream. If
+VIDEO_SOURCE_MEMORY is selected the stream comes from the application
+through the **write()** system call.
+
+
+.. _video-play-state-t:
+
+video_play_state_t
+==================
+
+The following values can be returned by the VIDEO_GET_STATUS call
+representing the state of video playback.
+
+
+.. code-block:: c
+
+    typedef enum {
+	VIDEO_STOPPED, /* Video is stopped */
+	VIDEO_PLAYING, /* Video is currently playing */
+	VIDEO_FREEZED  /* Video is freezed */
+    } video_play_state_t;
+
+
+.. c:type:: video_command
+
+struct video_command
+====================
+
+The structure must be zeroed before use by the application This ensures
+it can be extended safely in the future.
+
+
+.. code-block:: c
+
+    struct video_command {
+	__u32 cmd;
+	__u32 flags;
+	union {
+	    struct {
+		__u64 pts;
+	    } stop;
+
+	    struct {
+		/* 0 or 1000 specifies normal speed,
+		   1 specifies forward single stepping,
+		   -1 specifies backward single stepping,
+		   >>1: playback at speed/1000 of the normal speed,
+		   <-1: reverse playback at (-speed/1000) of the normal speed. */
+		__s32 speed;
+		__u32 format;
+	    } play;
+
+	    struct {
+		__u32 data[16];
+	    } raw;
+	};
+    };
+
+
+.. _video-size-t:
+
+video_size_t
+============
+
+
+.. code-block:: c
+
+    typedef struct {
+	int w;
+	int h;
+	video_format_t aspect_ratio;
+    } video_size_t;
+
+
+.. c:type:: video_event
+
+struct video_event
+==================
+
+The following is the structure of a video event as it is returned by the
+VIDEO_GET_EVENT call.
+
+
+.. code-block:: c
+
+    struct video_event {
+	__s32 type;
+    #define VIDEO_EVENT_SIZE_CHANGED    1
+    #define VIDEO_EVENT_FRAME_RATE_CHANGED  2
+    #define VIDEO_EVENT_DECODER_STOPPED     3
+    #define VIDEO_EVENT_VSYNC       4
+	long timestamp;
+	union {
+	    video_size_t size;
+	    unsigned int frame_rate;    /* in frames per 1000sec */
+	    unsigned char vsync_field;  /* unknown/odd/even/progressive */
+	} u;
+    };
+
+
+.. c:type:: video_status
+
+struct video_status
+===================
+
+The VIDEO_GET_STATUS call returns the following structure informing
+about various states of the playback operation.
+
+
+.. code-block:: c
+
+    struct video_status {
+	int                   video_blank;   /* blank video on freeze? */
+	video_play_state_t    play_state;    /* current state of playback */
+	video_stream_source_t stream_source; /* current source (demux/memory) */
+	video_format_t        video_format;  /* current aspect ratio of stream */
+	video_displayformat_t display_format;/* selected cropping mode */
+    };
+
+If video_blank is set video will be blanked out if the channel is
+changed or if playback is stopped. Otherwise, the last picture will be
+displayed. play_state indicates if the video is currently frozen,
+stopped, or being played back. The stream_source corresponds to the
+selected source for the video stream. It can come either from the
+demultiplexer or from memory. The video_format indicates the aspect
+ratio (one of 4:3 or 16:9) of the currently played video stream.
+Finally, display_format corresponds to the selected cropping mode in
+case the source video format is not the same as the format of the output
+device.
+
+
+.. c:type:: video_still_picture
+
+struct video_still_picture
+==========================
+
+An I-frame displayed via the VIDEO_STILLPICTURE call is passed on
+within the following structure.
+
+
+.. code-block:: c
+
+    /* pointer to and size of a single iframe in memory */
+    struct video_still_picture {
+	char *iFrame;        /* pointer to a single iframe in memory */
+	int32_t size;
+    };
+
+
+.. _video_caps:
+
+video capabilities
+==================
+
+A call to VIDEO_GET_CAPABILITIES returns an unsigned integer with the
+following bits set according to the hardwares capabilities.
+
+
+.. code-block:: c
+
+     /* bit definitions for capabilities: */
+     /* can the hardware decode MPEG1 and/or MPEG2? */
+     #define VIDEO_CAP_MPEG1   1
+     #define VIDEO_CAP_MPEG2   2
+     /* can you send a system and/or program stream to video device?
+	(you still have to open the video and the audio device but only
+	 send the stream to the video device) */
+     #define VIDEO_CAP_SYS     4
+     #define VIDEO_CAP_PROG    8
+     /* can the driver also handle SPU, NAVI and CSS encoded data?
+	(CSS API is not present yet) */
+     #define VIDEO_CAP_SPU    16
+     #define VIDEO_CAP_NAVI   32
+     #define VIDEO_CAP_CSS    64
diff --git a/Documentation/userspace-api/media/fdl-appendix.rst b/Documentation/userspace-api/media/fdl-appendix.rst
new file mode 100644
index 000000000000..70c8cda10814
--- /dev/null
+++ b/Documentation/userspace-api/media/fdl-appendix.rst
@@ -0,0 +1,478 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _fdl:
+
+******************************
+GNU Free Documentation License
+******************************
+
+
+.. _fdl-preamble:
+
+0. PREAMBLE
+===========
+
+The purpose of this License is to make a manual, textbook, or other
+written document “free” in the sense of freedom: to assure everyone the
+effective freedom to copy and redistribute it, with or without modifying
+it, either commercially or noncommercially. Secondarily, this License
+preserves for the author and publisher a way to get credit for their
+work, while not being considered responsible for modifications made by
+others.
+
+This License is a kind of “copyleft”, which means that derivative works
+of the document must themselves be free in the same sense. It
+complements the GNU General Public License, which is a copyleft license
+designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free program
+should come with manuals providing the same freedoms that the software
+does. But this License is not limited to software manuals; it can be
+used for any textual work, regardless of subject matter or whether it is
+published as a printed book. We recommend this License principally for
+works whose purpose is instruction or reference.
+
+
+.. _fdl-section1:
+
+1. APPLICABILITY AND DEFINITIONS
+================================
+
+
+.. _fdl-document:
+
+This License applies to any manual or other work that contains a notice
+placed by the copyright holder saying it can be distributed under the
+terms of this License. The “Document”, below, refers to any such manual
+or work. Any member of the public is a licensee, and is addressed as
+“you”.
+
+
+.. _fdl-modified:
+
+A “Modified Version” of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+
+.. _fdl-secondary:
+
+A “Secondary Section” is a named appendix or a front-matter section of
+the :ref:`Document <fdl-document>` that deals exclusively with the
+relationship of the publishers or authors of the Document to the
+Document's overall subject (or to related matters) and contains nothing
+that could fall directly within that overall subject. (For example, if
+the Document is in part a textbook of mathematics, a Secondary Section
+may not explain any mathematics.) The relationship could be a matter of
+historical connection with the subject or with related matters, or of
+legal, commercial, philosophical, ethical or political position
+regarding them.
+
+
+.. _fdl-invariant:
+
+The “Invariant Sections” are certain
+:ref:`Secondary Sections <fdl-secondary>` whose titles are designated,
+as being those of Invariant Sections, in the notice that says that the
+:ref:`Document <fdl-document>` is released under this License.
+
+
+.. _fdl-cover-texts:
+
+The “Cover Texts” are certain short passages of text that are listed, as
+Front-Cover Texts or Back-Cover Texts, in the notice that says that the
+:ref:`Document <fdl-document>` is released under this License.
+
+
+.. _fdl-transparent:
+
+A “Transparent” copy of the :ref:`Document <fdl-document>` means a
+machine-readable copy, represented in a format whose specification is
+available to the general public, whose contents can be viewed and edited
+directly and straightforwardly with generic text editors or (for images
+composed of pixels) generic paint programs or (for drawings) some widely
+available drawing editor, and that is suitable for input to text
+formatters or for automatic translation to a variety of formats suitable
+for input to text formatters. A copy made in an otherwise Transparent
+file format whose markup has been designed to thwart or discourage
+subsequent modification by readers is not Transparent. A copy that is
+not “Transparent” is called “Opaque”.
+
+Examples of suitable formats for Transparent copies include plain ASCII
+without markup, Texinfo input format, LaTeX input format, SGML or XML
+using a publicly available DTD, and standard-conforming simple HTML
+designed for human modification. Opaque formats include PostScript, PDF,
+proprietary formats that can be read and edited only by proprietary word
+processors, SGML or XML for which the DTD and/or processing tools are
+not generally available, and the machine-generated HTML produced by some
+word processors for output purposes only.
+
+
+.. _fdl-title-page:
+
+The “Title Page” means, for a printed book, the title page itself, plus
+such following pages as are needed to hold, legibly, the material this
+License requires to appear in the title page. For works in formats which
+do not have any title page as such, “Title Page” means the text near the
+most prominent appearance of the work's title, preceding the beginning
+of the body of the text.
+
+
+.. _fdl-section2:
+
+2. VERBATIM COPYING
+===================
+
+You may copy and distribute the :ref:`Document <fdl-document>` in any
+medium, either commercially or noncommercially, provided that this
+License, the copyright notices, and the license notice saying this
+License applies to the Document are reproduced in all copies, and that
+you add no other conditions whatsoever to those of this License. You may
+not use technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute. However, you may accept
+compensation in exchange for copies. If you distribute a large enough
+number of copies you must also follow the conditions in
+:ref:`section 3 <fdl-section3>`.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+
+.. _fdl-section3:
+
+3. COPYING IN QUANTITY
+======================
+
+If you publish printed copies of the :ref:`Document <fdl-document>`
+numbering more than 100, and the Document's license notice requires
+:ref:`Cover Texts <fdl-cover-texts>`, you must enclose the copies in
+covers that carry, clearly and legibly, all these Cover Texts:
+Front-Cover Texts on the front cover, and Back-Cover Texts on the back
+cover. Both covers must also clearly and legibly identify you as the
+publisher of these copies. The front cover must present the full title
+with all words of the title equally prominent and visible. You may add
+other material on the covers in addition. Copying with changes limited
+to the covers, as long as they preserve the title of the
+:ref:`Document <fdl-document>` and satisfy these conditions, can be
+treated as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute :ref:`Opaque <fdl-transparent>` copies of
+the :ref:`Document <fdl-document>` numbering more than 100, you must
+either include a machine-readable :ref:`Transparent <fdl-transparent>`
+copy along with each Opaque copy, or state in or with each Opaque copy a
+publicly-accessible computer-network location containing a complete
+Transparent copy of the Document, free of added material, which the
+general network-using public has access to download anonymously at no
+charge using public-standard network protocols. If you use the latter
+option, you must take reasonably prudent steps, when you begin
+distribution of Opaque copies in quantity, to ensure that this
+Transparent copy will remain thus accessible at the stated location
+until at least one year after the last time you distribute an Opaque
+copy (directly or through your agents or retailers) of that edition to
+the public.
+
+It is requested, but not required, that you contact the authors of the
+:ref:`Document <fdl-document>` well before redistributing any large
+number of copies, to give them a chance to provide you with an updated
+version of the Document.
+
+
+.. _fdl-section4:
+
+4. MODIFICATIONS
+================
+
+You may copy and distribute a :ref:`Modified Version <fdl-modified>`
+of the :ref:`Document <fdl-document>` under the conditions of sections
+:ref:`2 <fdl-section2>` and :ref:`3 <fdl-section3>` above, provided
+that you release the Modified Version under precisely this License, with
+the Modified Version filling the role of the Document, thus licensing
+distribution and modification of the Modified Version to whoever
+possesses a copy of it. In addition, you must do these things in the
+Modified Version:
+
+-  **A.**
+   Use in the :ref:`Title Page <fdl-title-page>` (and on the covers,
+   if any) a title distinct from that of the
+   :ref:`Document <fdl-document>`, and from those of previous versions
+   (which should, if there were any, be listed in the History section of
+   the Document). You may use the same title as a previous version if
+   the original publisher of that version gives permission.
+
+-  **B.**
+   List on the :ref:`Title Page <fdl-title-page>`, as authors, one or
+   more persons or entities responsible for authorship of the
+   modifications in the :ref:`Modified Version <fdl-modified>`,
+   together with at least five of the principal authors of the
+   :ref:`Document <fdl-document>` (all of its principal authors, if it
+   has less than five).
+
+-  **C.**
+   State on the :ref:`Title Page <fdl-title-page>` the name of the
+   publisher of the :ref:`Modified Version <fdl-modified>`, as the
+   publisher.
+
+-  **D.**
+   Preserve all the copyright notices of the
+   :ref:`Document <fdl-document>`.
+
+-  **E.**
+   Add an appropriate copyright notice for your modifications adjacent
+   to the other copyright notices.
+
+-  **F.**
+   Include, immediately after the copyright notices, a license notice
+   giving the public permission to use the
+   :ref:`Modified Version <fdl-modified>` under the terms of this
+   License, in the form shown in the Addendum below.
+
+-  **G.**
+   Preserve in that license notice the full lists of
+   :ref:`Invariant Sections <fdl-invariant>` and required
+   :ref:`Cover Texts <fdl-cover-texts>` given in the
+   :ref:`Document's <fdl-document>` license notice.
+
+-  **H.**
+   Include an unaltered copy of this License.
+
+-  **I.**
+   Preserve the section entitled “History”, and its title, and add to it
+   an item stating at least the title, year, new authors, and publisher
+   of the :ref:`Modified Version <fdl-modified>` as given on the
+   :ref:`Title Page <fdl-title-page>`. If there is no section entitled
+   “History” in the :ref:`Document <fdl-document>`, create one stating
+   the title, year, authors, and publisher of the Document as given on
+   its Title Page, then add an item describing the Modified Version as
+   stated in the previous sentence.
+
+-  **J.**
+   Preserve the network location, if any, given in the
+   :ref:`Document <fdl-document>` for public access to a
+   :ref:`Transparent <fdl-transparent>` copy of the Document, and
+   likewise the network locations given in the Document for previous
+   versions it was based on. These may be placed in the “History”
+   section. You may omit a network location for a work that was
+   published at least four years before the Document itself, or if the
+   original publisher of the version it refers to gives permission.
+
+-  **K.**
+   In any section entitled “Acknowledgements” or “Dedications”, preserve
+   the section's title, and preserve in the section all the substance
+   and tone of each of the contributor acknowledgements and/or
+   dedications given therein.
+
+-  **L.**
+   Preserve all the :ref:`Invariant Sections <fdl-invariant>` of the
+   :ref:`Document <fdl-document>`, unaltered in their text and in
+   their titles. Section numbers or the equivalent are not considered
+   part of the section titles.
+
+-  **M.**
+   Delete any section entitled “Endorsements”. Such a section may not be
+   included in the :ref:`Modified Version <fdl-modified>`.
+
+-  **N.**
+   Do not retitle any existing section as “Endorsements” or to conflict
+   in title with any :ref:`Invariant Section <fdl-invariant>`.
+
+If the :ref:`Modified Version <fdl-modified>` includes new
+front-matter sections or appendices that qualify as
+:ref:`Secondary Sections <fdl-secondary>` and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant. To do this, add their titles to the list
+of :ref:`Invariant Sections <fdl-invariant>` in the Modified Version's
+license notice. These titles must be distinct from any other section
+titles.
+
+You may add a section entitled “Endorsements”, provided it contains
+nothing but endorsements of your
+:ref:`Modified Version <fdl-modified>` by various parties--for
+example, statements of peer review or that the text has been approved by
+an organization as the authoritative definition of a standard.
+
+You may add a passage of up to five words as a
+:ref:`Front-Cover Text <fdl-cover-texts>`, and a passage of up to 25
+words as a :ref:`Back-Cover Text <fdl-cover-texts>`, to the end of the
+list of :ref:`Cover Texts <fdl-cover-texts>` in the
+:ref:`Modified Version <fdl-modified>`. Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or through
+arrangements made by) any one entity. If the
+:ref:`Document <fdl-document>` already includes a cover text for the
+same cover, previously added by you or by arrangement made by the same
+entity you are acting on behalf of, you may not add another; but you may
+replace the old one, on explicit permission from the previous publisher
+that added the old one.
+
+The author(s) and publisher(s) of the :ref:`Document <fdl-document>`
+do not by this License give permission to use their names for publicity
+for or to assert or imply endorsement of any
+:ref:`Modified Version <fdl-modified>`.
+
+
+.. _fdl-section5:
+
+5. COMBINING DOCUMENTS
+======================
+
+You may combine the :ref:`Document <fdl-document>` with other
+documents released under this License, under the terms defined in
+:ref:`section 4 <fdl-section4>` above for modified versions, provided
+that you include in the combination all of the
+:ref:`Invariant Sections <fdl-invariant>` of all of the original
+documents, unmodified, and list them all as Invariant Sections of your
+combined work in its license notice.
+
+The combined work need only contain one copy of this License, and
+multiple identical :ref:`Invariant Sections <fdl-invariant>` may be
+replaced with a single copy. If there are multiple Invariant Sections
+with the same name but different contents, make the title of each such
+section unique by adding at the end of it, in parentheses, the name of
+the original author or publisher of that section if known, or else a
+unique number. Make the same adjustment to the section titles in the
+list of Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections entitled “History” in
+the various original documents, forming one section entitled “History”;
+likewise combine any sections entitled “Acknowledgements”, and any
+sections entitled “Dedications”. You must delete all sections entitled
+“Endorsements.”
+
+
+.. _fdl-section6:
+
+6. COLLECTIONS OF DOCUMENTS
+===========================
+
+You may make a collection consisting of the
+:ref:`Document <fdl-document>` and other documents released under this
+License, and replace the individual copies of this License in the
+various documents with a single copy that is included in the collection,
+provided that you follow the rules of this License for verbatim copying
+of each of the documents in all other respects.
+
+You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+
+
+.. _fdl-section7:
+
+7. AGGREGATION WITH INDEPENDENT WORKS
+=====================================
+
+A compilation of the :ref:`Document <fdl-document>` or its derivatives
+with other separate and independent documents or works, in or on a
+volume of a storage or distribution medium, does not as a whole count as
+a :ref:`Modified Version <fdl-modified>` of the Document, provided no
+compilation copyright is claimed for the compilation. Such a compilation
+is called an “aggregate”, and this License does not apply to the other
+self-contained works thus compiled with the Document , on account of
+their being thus compiled, if they are not themselves derivative works
+of the Document. If the :ref:`Cover Text <fdl-cover-texts>`
+requirement of :ref:`section 3 <fdl-section3>` is applicable to these
+copies of the Document, then if the Document is less than one quarter of
+the entire aggregate, the Document's Cover Texts may be placed on covers
+that surround only the Document within the aggregate. Otherwise they
+must appear on covers around the whole aggregate.
+
+
+.. _fdl-section8:
+
+8. TRANSLATION
+==============
+
+Translation is considered a kind of modification, so you may distribute
+translations of the :ref:`Document <fdl-document>` under the terms of
+:ref:`section 4 <fdl-section4>`. Replacing
+:ref:`Invariant Sections <fdl-invariant>` with translations requires
+special permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections. You may include a
+translation of this License provided that you also include the original
+English version of this License. In case of a disagreement between the
+translation and the original English version of this License, the
+original English version will prevail.
+
+
+.. _fdl-section9:
+
+9. TERMINATION
+==============
+
+You may not copy, modify, sublicense, or distribute the
+:ref:`Document <fdl-document>` except as expressly provided for under
+this License. Any other attempt to copy, modify, sublicense or
+distribute the Document is void, and will automatically terminate your
+rights under this License. However, parties who have received copies, or
+rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+
+.. _fdl-section10:
+
+10. FUTURE REVISIONS OF THIS LICENSE
+====================================
+
+The `Free Software Foundation <http://www.gnu.org/fsf/fsf.html>`__
+may publish new, revised versions of the GNU Free Documentation License
+from time to time. Such new versions will be similar in spirit to the
+present version, but may differ in detail to address new problems or
+concerns. See
+`http://www.gnu.org/copyleft/ <http://www.gnu.org/copyleft>`__.
+
+Each version of the License is given a distinguishing version number. If
+the :ref:`Document <fdl-document>` specifies that a particular
+numbered version of this License “or any later version” applies to it,
+you have the option of following the terms and conditions either of that
+specified version or of any later version that has been published (not
+as a draft) by the Free Software Foundation. If the Document does not
+specify a version number of this License, you may choose any version
+ever published (not as a draft) by the Free Software Foundation.
+
+
+.. _fdl-using:
+
+Addendum
+========
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and license
+notices just after the title page:
+
+    Copyright © YEAR YOUR NAME.
+
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation; with the :ref:`Invariant Sections <fdl-invariant>`
+    being LIST THEIR TITLES, with the
+    :ref:`Front-Cover Texts <fdl-cover-texts>` being LIST, and with
+    the :ref:`Back-Cover Texts <fdl-cover-texts>` being LIST. A copy
+    of the license is included in the section entitled “GNU Free
+    Documentation License”.
+
+If you have no :ref:`Invariant Sections <fdl-invariant>`, write “with
+no Invariant Sections” instead of saying which ones are invariant. If
+you have no :ref:`Front-Cover Texts <fdl-cover-texts>`, write “no
+Front-Cover Texts” instead of “Front-Cover Texts being LIST”; likewise
+for :ref:`Back-Cover Texts <fdl-cover-texts>`.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of free
+software license, such as the
+`GNU General Public License <http://www.gnu.org/copyleft/gpl.html>`__,
+to permit their use in free software.
diff --git a/Documentation/userspace-api/media/frontend.h.rst.exceptions b/Documentation/userspace-api/media/frontend.h.rst.exceptions
new file mode 100644
index 000000000000..6283702c08c8
--- /dev/null
+++ b/Documentation/userspace-api/media/frontend.h.rst.exceptions
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define _DVBFRONTEND_H_
+
+# Group layer A-C symbols together
+replace define DTV_ISDBT_LAYERA_FEC dtv-isdbt-layer-fec
+replace define DTV_ISDBT_LAYERB_FEC dtv-isdbt-layer-fec
+replace define DTV_ISDBT_LAYERC_FEC dtv-isdbt-layer-fec
+replace define DTV_ISDBT_LAYERA_MODULATION dtv-isdbt-layer-modulation
+replace define DTV_ISDBT_LAYERB_MODULATION dtv-isdbt-layer-modulation
+replace define DTV_ISDBT_LAYERC_MODULATION dtv-isdbt-layer-modulation
+replace define DTV_ISDBT_LAYERA_SEGMENT_COUNT dtv-isdbt-layer-segment-count
+replace define DTV_ISDBT_LAYERB_SEGMENT_COUNT dtv-isdbt-layer-segment-count
+replace define DTV_ISDBT_LAYERC_SEGMENT_COUNT dtv-isdbt-layer-segment-count
+replace define DTV_ISDBT_LAYERA_TIME_INTERLEAVING dtv-isdbt-layer-time-interleaving
+replace define DTV_ISDBT_LAYERB_TIME_INTERLEAVING dtv-isdbt-layer-time-interleaving
+replace define DTV_ISDBT_LAYERC_TIME_INTERLEAVING dtv-isdbt-layer-time-interleaving
+
+# Ignore legacy defines
+ignore define DTV_ISDBS_TS_ID_LEGACY
+ignore define SYS_DVBC_ANNEX_AC
+ignore define SYS_DMBTH
+
+# Ignore limits
+ignore define DTV_MAX_COMMAND
+ignore define MAX_DTV_STATS
+ignore define DTV_IOCTL_MAX_MSGS
+
+# the same reference is used for both get and set ioctls
+replace ioctl FE_SET_PROPERTY :c:type:`FE_GET_PROPERTY`
+
+# Typedefs that use the enum reference
+replace typedef fe_sec_voltage_t :c:type:`fe_sec_voltage`
+
+# Replaces for flag constants
+replace define FE_TUNE_MODE_ONESHOT :c:func:`FE_SET_FRONTEND_TUNE_MODE`
+replace define LNA_AUTO dtv-lna
+replace define NO_STREAM_ID_FILTER dtv-stream-id
+
+# Those enums are defined at the frontend.h header, and not externally
+
+ignore symbol FE_IS_STUPID
+ignore symbol FE_CAN_INVERSION_AUTO
+ignore symbol FE_CAN_FEC_1_2
+ignore symbol FE_CAN_FEC_2_3
+ignore symbol FE_CAN_FEC_3_4
+ignore symbol FE_CAN_FEC_4_5
+ignore symbol FE_CAN_FEC_5_6
+ignore symbol FE_CAN_FEC_6_7
+ignore symbol FE_CAN_FEC_7_8
+ignore symbol FE_CAN_FEC_8_9
+ignore symbol FE_CAN_FEC_AUTO
+ignore symbol FE_CAN_QPSK
+ignore symbol FE_CAN_QAM_16
+ignore symbol FE_CAN_QAM_32
+ignore symbol FE_CAN_QAM_64
+ignore symbol FE_CAN_QAM_128
+ignore symbol FE_CAN_QAM_256
+ignore symbol FE_CAN_QAM_AUTO
+ignore symbol FE_CAN_TRANSMISSION_MODE_AUTO
+ignore symbol FE_CAN_BANDWIDTH_AUTO
+ignore symbol FE_CAN_GUARD_INTERVAL_AUTO
+ignore symbol FE_CAN_HIERARCHY_AUTO
+ignore symbol FE_CAN_8VSB
+ignore symbol FE_CAN_16VSB
+ignore symbol FE_HAS_EXTENDED_CAPS
+ignore symbol FE_CAN_MULTISTREAM
+ignore symbol FE_CAN_TURBO_FEC
+ignore symbol FE_CAN_2G_MODULATION
+ignore symbol FE_NEEDS_BENDING
+ignore symbol FE_CAN_RECOVER
+ignore symbol FE_CAN_MUTE_TS
+
+ignore symbol QPSK
+ignore symbol QAM_16
+ignore symbol QAM_32
+ignore symbol QAM_64
+ignore symbol QAM_128
+ignore symbol QAM_256
+ignore symbol QAM_AUTO
+ignore symbol VSB_8
+ignore symbol VSB_16
+ignore symbol PSK_8
+ignore symbol APSK_16
+ignore symbol APSK_32
+ignore symbol DQPSK
+ignore symbol QAM_4_NR
+
+ignore symbol SEC_VOLTAGE_13
+ignore symbol SEC_VOLTAGE_18
+ignore symbol SEC_VOLTAGE_OFF
+
+ignore symbol SEC_TONE_ON
+ignore symbol SEC_TONE_OFF
+
+ignore symbol SEC_MINI_A
+ignore symbol SEC_MINI_B
+
+ignore symbol FE_NONE
+ignore symbol FE_HAS_SIGNAL
+ignore symbol FE_HAS_CARRIER
+ignore symbol FE_HAS_VITERBI
+ignore symbol FE_HAS_SYNC
+ignore symbol FE_HAS_LOCK
+ignore symbol FE_REINIT
+ignore symbol FE_TIMEDOUT
+
+ignore symbol FEC_NONE
+ignore symbol FEC_1_2
+ignore symbol FEC_2_3
+ignore symbol FEC_3_4
+ignore symbol FEC_4_5
+ignore symbol FEC_5_6
+ignore symbol FEC_6_7
+ignore symbol FEC_7_8
+ignore symbol FEC_8_9
+ignore symbol FEC_AUTO
+ignore symbol FEC_3_5
+ignore symbol FEC_9_10
+ignore symbol FEC_2_5
+
+ignore symbol TRANSMISSION_MODE_AUTO
+ignore symbol TRANSMISSION_MODE_1K
+ignore symbol TRANSMISSION_MODE_2K
+ignore symbol TRANSMISSION_MODE_8K
+ignore symbol TRANSMISSION_MODE_4K
+ignore symbol TRANSMISSION_MODE_16K
+ignore symbol TRANSMISSION_MODE_32K
+ignore symbol TRANSMISSION_MODE_C1
+ignore symbol TRANSMISSION_MODE_C3780
+ignore symbol TRANSMISSION_MODE_2K
+ignore symbol TRANSMISSION_MODE_8K
+
+ignore symbol GUARD_INTERVAL_AUTO
+ignore symbol GUARD_INTERVAL_1_128
+ignore symbol GUARD_INTERVAL_1_32
+ignore symbol GUARD_INTERVAL_1_16
+ignore symbol GUARD_INTERVAL_1_8
+ignore symbol GUARD_INTERVAL_1_4
+ignore symbol GUARD_INTERVAL_19_128
+ignore symbol GUARD_INTERVAL_19_256
+ignore symbol GUARD_INTERVAL_PN420
+ignore symbol GUARD_INTERVAL_PN595
+ignore symbol GUARD_INTERVAL_PN945
+
+ignore symbol HIERARCHY_NONE
+ignore symbol HIERARCHY_AUTO
+ignore symbol HIERARCHY_1
+ignore symbol HIERARCHY_2
+ignore symbol HIERARCHY_4
+
+ignore symbol INTERLEAVING_NONE
+ignore symbol INTERLEAVING_AUTO
+ignore symbol INTERLEAVING_240
+ignore symbol INTERLEAVING_720
+
+ignore symbol PILOT_ON
+ignore symbol PILOT_OFF
+ignore symbol PILOT_AUTO
+
+ignore symbol ROLLOFF_35
+ignore symbol ROLLOFF_20
+ignore symbol ROLLOFF_25
+ignore symbol ROLLOFF_AUTO
+
+ignore symbol INVERSION_ON
+ignore symbol INVERSION_OFF
+ignore symbol INVERSION_AUTO
+
+ignore symbol SYS_UNDEFINED
+ignore symbol SYS_DVBC_ANNEX_A
+ignore symbol SYS_DVBC_ANNEX_B
+ignore symbol SYS_DVBC_ANNEX_C
+ignore symbol SYS_ISDBC
+ignore symbol SYS_DVBT
+ignore symbol SYS_DVBT2
+ignore symbol SYS_ISDBT
+ignore symbol SYS_ATSC
+ignore symbol SYS_ATSCMH
+ignore symbol SYS_DTMB
+ignore symbol SYS_DVBS
+ignore symbol SYS_DVBS2
+ignore symbol SYS_TURBO
+ignore symbol SYS_ISDBS
+ignore symbol SYS_DAB
+ignore symbol SYS_DSS
+ignore symbol SYS_CMMB
+ignore symbol SYS_DVBH
+
+ignore symbol ATSCMH_SCCC_BLK_SEP
+ignore symbol ATSCMH_SCCC_BLK_COMB
+ignore symbol ATSCMH_SCCC_BLK_RES
+
+ignore symbol ATSCMH_SCCC_CODE_HLF
+ignore symbol ATSCMH_SCCC_CODE_QTR
+ignore symbol ATSCMH_SCCC_CODE_RES
+
+ignore symbol ATSCMH_RSFRAME_ENS_PRI
+ignore symbol ATSCMH_RSFRAME_ENS_SEC
+
+ignore symbol ATSCMH_RSFRAME_PRI_ONLY
+ignore symbol ATSCMH_RSFRAME_PRI_SEC
+ignore symbol ATSCMH_RSFRAME_RES
+
+ignore symbol ATSCMH_RSCODE_211_187
+ignore symbol ATSCMH_RSCODE_223_187
+ignore symbol ATSCMH_RSCODE_235_187
+ignore symbol ATSCMH_RSCODE_RES
+
+ignore symbol FE_SCALE_NOT_AVAILABLE
+ignore symbol FE_SCALE_DECIBEL
+ignore symbol FE_SCALE_RELATIVE
+ignore symbol FE_SCALE_COUNTER
diff --git a/Documentation/userspace-api/media/gen-errors.rst b/Documentation/userspace-api/media/gen-errors.rst
new file mode 100644
index 000000000000..abae4dbed549
--- /dev/null
+++ b/Documentation/userspace-api/media/gen-errors.rst
@@ -0,0 +1,103 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _gen_errors:
+
+*******************
+Generic Error Codes
+*******************
+
+
+.. _gen-errors:
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table:: Generic error codes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+
+    -  -  ``EAGAIN`` (aka ``EWOULDBLOCK``)
+
+       -  The ioctl can't be handled because the device is in state where it
+	  can't perform it. This could happen for example in case where
+	  device is sleeping and ioctl is performed to query statistics. It
+	  is also returned when the ioctl would need to wait for an event,
+	  but the device was opened in non-blocking mode.
+
+    -  -  ``EBADF``
+
+       -  The file descriptor is not a valid.
+
+    -  -  ``EBUSY``
+
+       -  The ioctl can't be handled because the device is busy. This is
+	  typically return while device is streaming, and an ioctl tried to
+	  change something that would affect the stream, or would require
+	  the usage of a hardware resource that was already allocated. The
+	  ioctl must not be retried without performing another action to fix
+	  the problem first (typically: stop the stream before retrying).
+
+    -  -  ``EFAULT``
+
+       -  There was a failure while copying data from/to userspace, probably
+	  caused by an invalid pointer reference.
+
+    -  -  ``EINVAL``
+
+       -  One or more of the ioctl parameters are invalid or out of the
+	  allowed range. This is a widely used error code. See the
+	  individual ioctl requests for specific causes.
+
+    -  -  ``ENODEV``
+
+       -  Device not found or was removed.
+
+    -  -  ``ENOMEM``
+
+       -  There's not enough memory to handle the desired operation.
+
+    -  -  ``ENOTTY``
+
+       -  The ioctl is not supported by the driver, actually meaning that
+	  the required functionality is not available, or the file
+	  descriptor is not for a media device.
+
+    -  -  ``ENOSPC``
+
+       -  On USB devices, the stream ioctl's can return this error, meaning
+	  that this request would overcommit the usb bandwidth reserved for
+	  periodic transfers (up to 80% of the USB bandwidth).
+
+    -  -  ``EPERM``
+
+       -  Permission denied. Can be returned if the device needs write
+	  permission, or some special capabilities is needed (e. g. root)
+
+    -  -  ``EIO``
+
+       -  I/O error. Typically used when there are problems communicating with
+          a hardware device. This could indicate broken or flaky hardware.
+	  It's a 'Something is wrong, I give up!' type of error.
+
+    -  - ``ENXIO``
+
+       -  No device corresponding to this device special file exists.
+
+
+.. note::
+
+  #. This list is not exhaustive; ioctls may return other error codes.
+     Since errors may have side effects such as a driver reset,
+     applications should abort on unexpected errors, or otherwise
+     assume that the device is in a bad state.
+
+  #. Request-specific error codes are listed in the individual
+     requests descriptions.
diff --git a/Documentation/userspace-api/media/index.rst b/Documentation/userspace-api/media/index.rst
new file mode 100644
index 000000000000..70a3f3d73698
--- /dev/null
+++ b/Documentation/userspace-api/media/index.rst
@@ -0,0 +1,67 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+########################################
+Linux Media Infrastructure userspace API
+########################################
+
+This section contains the  driver development information and Kernel APIs
+used by media devices.
+
+Please see:
+
+- :doc:`/admin-guide/media/index`
+    for usage information about media subsystem and supported drivers;
+
+- :doc:`/driver-api/media/index`
+     for driver development information and Kernel APIs used by
+     media devices;
+
+
+.. only:: html
+
+   .. class:: toc-title
+
+        Table of Contents
+
+.. toctree::
+    :maxdepth: 1
+
+    intro
+    v4l/v4l2
+    dvb/dvbapi
+    rc/remote_controllers
+    mediactl/media-controller
+    cec/cec-api
+    gen-errors
+    fdl-appendix
+
+    drivers/index
+
+**Copyright** |copy| 2009-2020 : LinuxTV Developers
+
+::
+
+  Permission is granted to copy, distribute and/or modify this document
+  under the terms of the GNU Free Documentation License, Version 1.1 or
+  any later version published by the Free Software Foundation, with no
+  Invariant Sections. A copy of the license is included in the chapter
+  entitled "GNU Free Documentation License".
+
+Please notice that some documents inside the media userspace API,
+when explicitly mentioned on its source code, are dual-licensed
+with GNU Free Documentation License  Version 1.1 and with the
+GNU General Public License::
+
+  This documentation is free software; you can redistribute it and/or modify it
+  under the terms of the GNU General Public License as published by the Free
+  Software Foundation; either version 2 of the License, or (at your option) any
+  later version.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+  more details.
+
+  For more details see the file COPYING in the source distribution of Linux.
diff --git a/Documentation/userspace-api/media/intro.rst b/Documentation/userspace-api/media/intro.rst
new file mode 100644
index 000000000000..4a6bd665b884
--- /dev/null
+++ b/Documentation/userspace-api/media/intro.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+Introduction
+============
+
+This document covers the Linux Kernel to Userspace API's used by video
+and radio streaming devices, including video cameras, analog and digital
+TV receiver cards, AM/FM receiver cards, Software Defined Radio (SDR),
+streaming capture and output devices, codec devices and remote controllers.
+
+A typical media device hardware is shown at :ref:`typical_media_device`.
+
+.. _typical_media_device:
+
+.. kernel-figure:: typical_media_device.svg
+    :alt:   typical_media_device.svg
+    :align: center
+
+    Typical Media Device
+
+The media infrastructure API was designed to control such devices. It is
+divided into five parts.
+
+1. The :ref:`first part <v4l2spec>` covers radio, video capture and output,
+   cameras, analog TV devices and codecs.
+
+2. The :ref:`second part <dvbapi>` covers the API used for digital TV and
+   Internet reception via one of the several digital tv standards. While it is
+   called as DVB API, in fact it covers several different video standards
+   including DVB-T/T2, DVB-S/S2, DVB-C, ATSC, ISDB-T, ISDB-S, DTMB, etc. The
+   complete list of supported standards can be found at
+   :c:type:`fe_delivery_system`.
+
+3. The :ref:`third part <remote_controllers>` covers the Remote Controller API.
+
+4. The :ref:`fourth part <media_controller>` covers the Media Controller API.
+
+5. The :ref:`fifth part <cec>` covers the CEC (Consumer Electronics Control) API.
+
+It should also be noted that a media device may also have audio components, like
+mixers, PCM capture, PCM playback, etc, which are controlled via ALSA API.  For
+additional information and for the latest development code, see:
+`https://linuxtv.org <https://linuxtv.org>`__.  For discussing improvements,
+reporting troubles, sending new drivers, etc, please mail to: `Linux Media
+Mailing List (LMML) <http://vger.kernel.org/vger-lists.html#linux-media>`__.
diff --git a/Documentation/userspace-api/media/lirc.h.rst.exceptions b/Documentation/userspace-api/media/lirc.h.rst.exceptions
new file mode 100644
index 000000000000..ac768d769113
--- /dev/null
+++ b/Documentation/userspace-api/media/lirc.h.rst.exceptions
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define _LINUX_LIRC_H
+
+# Ignore helper macros
+
+ignore define lirc_t
+
+ignore define LIRC_SPACE
+ignore define LIRC_PULSE
+ignore define LIRC_FREQUENCY
+ignore define LIRC_TIMEOUT
+ignore define LIRC_VALUE
+ignore define LIRC_MODE2
+ignore define LIRC_IS_SPACE
+ignore define LIRC_IS_PULSE
+ignore define LIRC_IS_FREQUENCY
+ignore define LIRC_IS_TIMEOUT
+
+ignore define LIRC_MODE2SEND
+ignore define LIRC_SEND2MODE
+ignore define LIRC_MODE2REC
+ignore define LIRC_REC2MODE
+
+ignore define LIRC_CAN_SEND
+ignore define LIRC_CAN_REC
+
+ignore define LIRC_CAN_SEND_MASK
+ignore define LIRC_CAN_REC_MASK
+ignore define LIRC_CAN_SET_REC_DUTY_CYCLE
+
+# Obsolete ioctls
+
+ignore ioctl LIRC_GET_LENGTH
+
+# rc protocols
+
+ignore symbol RC_PROTO_UNKNOWN
+ignore symbol RC_PROTO_OTHER
+ignore symbol RC_PROTO_RC5
+ignore symbol RC_PROTO_RC5X_20
+ignore symbol RC_PROTO_RC5_SZ
+ignore symbol RC_PROTO_JVC
+ignore symbol RC_PROTO_SONY12
+ignore symbol RC_PROTO_SONY15
+ignore symbol RC_PROTO_SONY20
+ignore symbol RC_PROTO_NEC
+ignore symbol RC_PROTO_NECX
+ignore symbol RC_PROTO_NEC32
+ignore symbol RC_PROTO_SANYO
+ignore symbol RC_PROTO_MCIR2_KBD
+ignore symbol RC_PROTO_MCIR2_MSE
+ignore symbol RC_PROTO_RC6_0
+ignore symbol RC_PROTO_RC6_6A_20
+ignore symbol RC_PROTO_RC6_6A_24
+ignore symbol RC_PROTO_RC6_6A_32
+ignore symbol RC_PROTO_RC6_MCE
+ignore symbol RC_PROTO_SHARP
+ignore symbol RC_PROTO_XMP
+ignore symbol RC_PROTO_CEC
+ignore symbol RC_PROTO_IMON
+ignore symbol RC_PROTO_RCMM12
+ignore symbol RC_PROTO_RCMM24
+ignore symbol RC_PROTO_RCMM32
+ignore symbol RC_PROTO_XBOX_DVD
+
+# Undocumented macros
+
+ignore define PULSE_BIT
+ignore define PULSE_MASK
+
+ignore define LIRC_MODE2_SPACE
+ignore define LIRC_MODE2_PULSE
+
+ignore define LIRC_VALUE_MASK
+ignore define LIRC_MODE2_MASK
+
+ignore define LIRC_MODE_RAW
+ignore define LIRC_MODE_LIRCCODE
diff --git a/Documentation/userspace-api/media/media.h.rst.exceptions b/Documentation/userspace-api/media/media.h.rst.exceptions
new file mode 100644
index 000000000000..9b4c26502d95
--- /dev/null
+++ b/Documentation/userspace-api/media/media.h.rst.exceptions
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define __LINUX_MEDIA_H
+
+# Ignore macros
+ignore define MEDIA_API_VERSION
+ignore define MEDIA_ENT_F_BASE
+ignore define MEDIA_ENT_F_OLD_BASE
+ignore define MEDIA_ENT_F_OLD_SUBDEV_BASE
+ignore define MEDIA_ENT_F_DTV_DECODER
+ignore define MEDIA_INTF_T_DVB_BASE
+ignore define MEDIA_INTF_T_V4L_BASE
+ignore define MEDIA_INTF_T_ALSA_BASE
+#ignore legacy entity type macros
+ignore define MEDIA_ENT_TYPE_SHIFT
+ignore define MEDIA_ENT_TYPE_MASK
+ignore define MEDIA_ENT_SUBTYPE_MASK
+ignore define MEDIA_ENT_T_DEVNODE_UNKNOWN
+ignore define MEDIA_ENT_T_DEVNODE
+ignore define MEDIA_ENT_T_DEVNODE_V4L
+ignore define MEDIA_ENT_T_DEVNODE_FB
+ignore define MEDIA_ENT_T_DEVNODE_ALSA
+ignore define MEDIA_ENT_T_DEVNODE_DVB
+ignore define MEDIA_ENT_T_UNKNOWN
+ignore define MEDIA_ENT_T_V4L2_VIDEO
+ignore define MEDIA_ENT_T_V4L2_SUBDEV
+ignore define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR
+ignore define MEDIA_ENT_T_V4L2_SUBDEV_FLASH
+ignore define MEDIA_ENT_T_V4L2_SUBDEV_LENS
+ignore define MEDIA_ENT_T_V4L2_SUBDEV_DECODER
+ignore define MEDIA_ENT_T_V4L2_SUBDEV_TUNER
diff --git a/Documentation/userspace-api/media/mediactl/media-controller-intro.rst b/Documentation/userspace-api/media/mediactl/media-controller-intro.rst
new file mode 100644
index 000000000000..1d06ea4c4d09
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-controller-intro.rst
@@ -0,0 +1,40 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media-controller-intro:
+
+Introduction
+============
+
+Media devices increasingly handle multiple related functions. Many USB
+cameras include microphones, video capture hardware can also output
+video, or SoC camera interfaces also perform memory-to-memory operations
+similar to video codecs.
+
+Independent functions, even when implemented in the same hardware, can
+be modelled as separate devices. A USB camera with a microphone will be
+presented to userspace applications as V4L2 and ALSA capture devices.
+The devices' relationships (when using a webcam, end-users shouldn't
+have to manually select the associated USB microphone), while not made
+available directly to applications by the drivers, can usually be
+retrieved from sysfs.
+
+With more and more advanced SoC devices being introduced, the current
+approach will not scale. Device topologies are getting increasingly
+complex and can't always be represented by a tree structure. Hardware
+blocks are shared between different functions, creating dependencies
+between seemingly unrelated devices.
+
+Kernel abstraction APIs such as V4L2 and ALSA provide means for
+applications to access hardware parameters. As newer hardware expose an
+increasingly high number of those parameters, drivers need to guess what
+applications really require based on limited information, thereby
+implementing policies that belong to userspace.
+
+The media controller API aims at solving those problems.
diff --git a/Documentation/userspace-api/media/mediactl/media-controller-model.rst b/Documentation/userspace-api/media/mediactl/media-controller-model.rst
new file mode 100644
index 000000000000..865e73d934d6
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-controller-model.rst
@@ -0,0 +1,42 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media-controller-model:
+
+Media device model
+==================
+
+Discovering a device internal topology, and configuring it at runtime,
+is one of the goals of the media controller API. To achieve this,
+hardware devices and Linux Kernel interfaces are modelled as graph
+objects on an oriented graph. The object types that constitute the graph
+are:
+
+-  An **entity** is a basic media hardware or software building block.
+   It can correspond to a large variety of logical blocks such as
+   physical hardware devices (CMOS sensor for instance), logical
+   hardware devices (a building block in a System-on-Chip image
+   processing pipeline), DMA channels or physical connectors.
+
+-  An **interface** is a graph representation of a Linux Kernel
+   userspace API interface, like a device node or a sysfs file that
+   controls one or more entities in the graph.
+
+-  A **pad** is a data connection endpoint through which an entity can
+   interact with other entities. Data (not restricted to video) produced
+   by an entity flows from the entity's output to one or more entity
+   inputs. Pads should not be confused with physical pins at chip
+   boundaries.
+
+-  A **data link** is a point-to-point oriented connection between two
+   pads, either on the same entity or on different entities. Data flows
+   from a source pad to a sink pad.
+
+-  An **interface link** is a point-to-point bidirectional control
+   connection between a Linux Kernel interface and an entity.
diff --git a/Documentation/userspace-api/media/mediactl/media-controller.rst b/Documentation/userspace-api/media/mediactl/media-controller.rst
new file mode 100644
index 000000000000..16bc3ab180d3
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-controller.rst
@@ -0,0 +1,62 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. include:: <isonum.txt>
+
+.. _media_controller:
+
+##############################
+Part IV - Media Controller API
+##############################
+
+.. only:: html
+
+   .. class:: toc-title
+
+        Table of Contents
+
+.. toctree::
+    :maxdepth: 5
+    :numbered:
+
+    media-controller-intro
+    media-controller-model
+    media-types
+    request-api
+    media-funcs
+    media-header
+
+
+**********************
+Revision and Copyright
+**********************
+
+Authors:
+
+- Pinchart, Laurent <laurent.pinchart@ideasonboard.com>
+
+ - Initial version.
+
+- Carvalho Chehab, Mauro <mchehab@kernel.org>
+
+ - MEDIA_IOC_G_TOPOLOGY documentation and documentation improvements.
+
+**Copyright** |copy| 2010 : Laurent Pinchart
+
+**Copyright** |copy| 2015-2016 : Mauro Carvalho Chehab
+
+****************
+Revision History
+****************
+
+:revision: 1.1.0 / 2015-12-12 (*mcc*)
+
+:revision: 1.0.0 / 2010-11-10 (*lp*)
+
+Initial revision
diff --git a/Documentation/userspace-api/media/mediactl/media-func-close.rst b/Documentation/userspace-api/media/mediactl/media-func-close.rst
new file mode 100644
index 000000000000..ceec61c9e7c5
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-func-close.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media-func-close:
+
+*************
+media close()
+*************
+
+Name
+====
+
+media-close - Close a media device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: int close( int fd )
+    :name: mc-close
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <mc-open>`.
+
+
+Description
+===========
+
+Closes the media device. Resources associated with the file descriptor
+are freed. The device configuration remain unchanged.
+
+
+Return Value
+============
+
+:ref:`close() <media-func-close>` returns 0 on success. On error, -1 is returned, and
+``errno`` is set appropriately. Possible error codes are:
+
+EBADF
+    ``fd`` is not a valid open file descriptor.
diff --git a/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst b/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst
new file mode 100644
index 000000000000..629e7be7c5be
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst
@@ -0,0 +1,74 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media-func-ioctl:
+
+*************
+media ioctl()
+*************
+
+Name
+====
+
+media-ioctl - Control a media device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <sys/ioctl.h>
+
+
+.. c:function:: int ioctl( int fd, int request, void *argp )
+    :name: mc-ioctl
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open() <mc-open>`.
+
+``request``
+    Media ioctl request code as defined in the media.h header file, for
+    example MEDIA_IOC_SETUP_LINK.
+
+``argp``
+    Pointer to a request-specific structure.
+
+
+Description
+===========
+
+The :ref:`ioctl() <media-func-ioctl>` function manipulates media device
+parameters. The argument ``fd`` must be an open file descriptor.
+
+The ioctl ``request`` code specifies the media function to be called. It
+has encoded in it whether the argument is an input, output or read/write
+parameter, and the size of the argument ``argp`` in bytes.
+
+Macros and structures definitions specifying media ioctl requests and
+their parameters are located in the media.h header file. All media ioctl
+requests, their respective function and parameters are specified in
+:ref:`media-user-func`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+Request-specific error codes are listed in the individual requests
+descriptions.
+
+When an ioctl that takes an output or read/write parameter fails, the
+parameter remains unmodified.
diff --git a/Documentation/userspace-api/media/mediactl/media-func-open.rst b/Documentation/userspace-api/media/mediactl/media-func-open.rst
new file mode 100644
index 000000000000..4ade1cc5048f
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-func-open.rst
@@ -0,0 +1,76 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media-func-open:
+
+************
+media open()
+************
+
+Name
+====
+
+media-open - Open a media device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <fcntl.h>
+
+
+.. c:function:: int open( const char *device_name, int flags )
+    :name: mc-open
+
+Arguments
+=========
+
+``device_name``
+    Device to be opened.
+
+``flags``
+    Open flags. Access mode must be either ``O_RDONLY`` or ``O_RDWR``.
+    Other flags have no effect.
+
+
+Description
+===========
+
+To open a media device applications call :ref:`open() <media-func-open>` with the
+desired device name. The function has no side effects; the device
+configuration remain unchanged.
+
+When the device is opened in read-only mode, attempts to modify its
+configuration will result in an error, and ``errno`` will be set to
+EBADF.
+
+
+Return Value
+============
+
+:ref:`open() <func-open>` returns the new file descriptor on success. On error,
+-1 is returned, and ``errno`` is set appropriately. Possible error codes
+are:
+
+EACCES
+    The requested access to the file is not allowed.
+
+EMFILE
+    The process already has the maximum number of files open.
+
+ENFILE
+    The system limit on the total number of open files has been reached.
+
+ENOMEM
+    Insufficient kernel memory was available.
+
+ENXIO
+    No device corresponding to this device special file exists.
diff --git a/Documentation/userspace-api/media/mediactl/media-funcs.rst b/Documentation/userspace-api/media/mediactl/media-funcs.rst
new file mode 100644
index 000000000000..085e80e7fbd5
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-funcs.rst
@@ -0,0 +1,33 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media-user-func:
+
+******************
+Function Reference
+******************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    media-func-open
+    media-func-close
+    media-func-ioctl
+    media-ioc-device-info
+    media-ioc-g-topology
+    media-ioc-enum-entities
+    media-ioc-enum-links
+    media-ioc-setup-link
+    media-ioc-request-alloc
+    request-func-close
+    request-func-ioctl
+    request-func-poll
+    media-request-ioc-queue
+    media-request-ioc-reinit
diff --git a/Documentation/userspace-api/media/mediactl/media-header.rst b/Documentation/userspace-api/media/mediactl/media-header.rst
new file mode 100644
index 000000000000..7ff9d24ce65f
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-header.rst
@@ -0,0 +1,17 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_header:
+
+****************************
+Media Controller Header File
+****************************
+
+.. kernel-include:: $BUILDDIR/media.h.rst
+
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst b/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst
new file mode 100644
index 000000000000..9c729bdc8e85
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst
@@ -0,0 +1,118 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_ioc_device_info:
+
+***************************
+ioctl MEDIA_IOC_DEVICE_INFO
+***************************
+
+Name
+====
+
+MEDIA_IOC_DEVICE_INFO - Query device information
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, MEDIA_IOC_DEVICE_INFO, struct media_device_info *argp )
+    :name: MEDIA_IOC_DEVICE_INFO
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <media-func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`media_device_info`.
+
+
+Description
+===========
+
+All media devices must support the ``MEDIA_IOC_DEVICE_INFO`` ioctl. To
+query device information, applications call the ioctl with a pointer to
+a struct :c:type:`media_device_info`. The driver
+fills the structure and returns the information to the application. The
+ioctl never fails.
+
+
+.. c:type:: media_device_info
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct media_device_info
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+
+    *  -  char
+       -  ``driver``\ [16]
+       -  Name of the driver implementing the media API as a NUL-terminated
+	  ASCII string. The driver version is stored in the
+	  ``driver_version`` field.
+
+	  Driver specific applications can use this information to verify
+	  the driver identity. It is also useful to work around known bugs,
+	  or to identify drivers in error reports.
+
+    *  -  char
+       -  ``model``\ [32]
+       -  Device model name as a NUL-terminated UTF-8 string. The device
+	  version is stored in the ``device_version`` field and is not be
+	  appended to the model name.
+
+    *  -  char
+       -  ``serial``\ [40]
+       -  Serial number as a NUL-terminated ASCII string.
+
+    *  -  char
+       -  ``bus_info``\ [32]
+       -  Location of the device in the system as a NUL-terminated ASCII
+	  string. This includes the bus type name (PCI, USB, ...) and a
+	  bus-specific identifier.
+
+    *  -  __u32
+       -  ``media_version``
+       -  Media API version, formatted with the ``KERNEL_VERSION()`` macro.
+
+    *  -  __u32
+       -  ``hw_revision``
+       -  Hardware device revision in a driver-specific format.
+
+    *  -  __u32
+       -  ``driver_version``
+       -  Media device driver version, formatted with the
+	  ``KERNEL_VERSION()`` macro. Together with the ``driver`` field
+	  this identifies a particular driver.
+
+    *  -  __u32
+       -  ``reserved``\ [31]
+       -  Reserved for future extensions. Drivers and applications must set
+	  this array to zero.
+
+
+The ``serial`` and ``bus_info`` fields can be used to distinguish
+between multiple instances of otherwise identical hardware. The serial
+number takes precedence when provided and can be assumed to be unique.
+If the serial number is an empty string, the ``bus_info`` field can be
+used instead. The ``bus_info`` field is guaranteed to be unique, but can
+vary across reboots or device unplug/replug.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst b/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst
new file mode 100644
index 000000000000..1d01de8e0f97
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst
@@ -0,0 +1,156 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_ioc_enum_entities:
+
+*****************************
+ioctl MEDIA_IOC_ENUM_ENTITIES
+*****************************
+
+Name
+====
+
+MEDIA_IOC_ENUM_ENTITIES - Enumerate entities and their properties
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, MEDIA_IOC_ENUM_ENTITIES, struct media_entity_desc *argp )
+    :name: MEDIA_IOC_ENUM_ENTITIES
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <media-func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`media_entity_desc`.
+
+
+Description
+===========
+
+To query the attributes of an entity, applications set the id field of a
+struct :c:type:`media_entity_desc` structure and
+call the MEDIA_IOC_ENUM_ENTITIES ioctl with a pointer to this
+structure. The driver fills the rest of the structure or returns an
+EINVAL error code when the id is invalid.
+
+.. _media-ent-id-flag-next:
+
+Entities can be enumerated by or'ing the id with the
+``MEDIA_ENT_ID_FLAG_NEXT`` flag. The driver will return information
+about the entity with the smallest id strictly larger than the requested
+one ('next entity'), or the ``EINVAL`` error code if there is none.
+
+Entity IDs can be non-contiguous. Applications must *not* try to
+enumerate entities by calling MEDIA_IOC_ENUM_ENTITIES with increasing
+id's until they get an error.
+
+
+.. c:type:: media_entity_desc
+
+.. tabularcolumns:: |p{1.5cm}|p{1.7cm}|p{1.6cm}|p{1.5cm}|p{11.2cm}|
+
+.. flat-table:: struct media_entity_desc
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 2 2 1 8
+
+    *  -  __u32
+       -  ``id``
+       -
+       -  Entity ID, set by the application. When the ID is or'ed with
+	  ``MEDIA_ENT_ID_FLAG_NEXT``, the driver clears the flag and returns
+	  the first entity with a larger ID. Do not expect that the ID will
+	  always be the same for each instance of the device. In other words,
+	  do not hardcode entity IDs in an application.
+
+    *  -  char
+       -  ``name``\ [32]
+       -
+       -  Entity name as an UTF-8 NULL-terminated string. This name must be unique
+          within the media topology.
+
+    *  -  __u32
+       -  ``type``
+       -
+       -  Entity type, see :ref:`media-entity-functions` for details.
+
+    *  -  __u32
+       -  ``revision``
+       -
+       -  Entity revision. Always zero (obsolete)
+
+    *  -  __u32
+       -  ``flags``
+       -
+       -  Entity flags, see :ref:`media-entity-flag` for details.
+
+    *  -  __u32
+       -  ``group_id``
+       -
+       -  Entity group ID. Always zero (obsolete)
+
+    *  -  __u16
+       -  ``pads``
+       -
+       -  Number of pads
+
+    *  -  __u16
+       -  ``links``
+       -
+       -  Total number of outbound links. Inbound links are not counted in
+	  this field.
+
+    *  -  __u32
+       -  ``reserved[4]``
+       -
+       -  Reserved for future extensions. Drivers and applications must set
+          the array to zero.
+
+    *  -  union {
+       -  (anonymous)
+
+    *  -  struct
+       -  ``dev``
+       -
+       -  Valid for (sub-)devices that create a single device node.
+
+    *  -
+       -  __u32
+       -  ``major``
+       -  Device node major number.
+
+    *  -
+       -  __u32
+       -  ``minor``
+       -  Device node minor number.
+
+    *  -  __u8
+       -  ``raw``\ [184]
+       -
+       -
+    *  - }
+       -
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`media_entity_desc` ``id``
+    references a non-existing entity.
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst b/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst
new file mode 100644
index 000000000000..9929b639db97
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst
@@ -0,0 +1,157 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_ioc_enum_links:
+
+**************************
+ioctl MEDIA_IOC_ENUM_LINKS
+**************************
+
+Name
+====
+
+MEDIA_IOC_ENUM_LINKS - Enumerate all pads and links for a given entity
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, MEDIA_IOC_ENUM_LINKS, struct media_links_enum *argp )
+    :name: MEDIA_IOC_ENUM_LINKS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <media-func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`media_links_enum`.
+
+
+Description
+===========
+
+To enumerate pads and/or links for a given entity, applications set the
+entity field of a struct :c:type:`media_links_enum`
+structure and initialize the struct
+:c:type:`media_pad_desc` and struct
+:c:type:`media_link_desc` structure arrays pointed by
+the ``pads`` and ``links`` fields. They then call the
+MEDIA_IOC_ENUM_LINKS ioctl with a pointer to this structure.
+
+If the ``pads`` field is not NULL, the driver fills the ``pads`` array
+with information about the entity's pads. The array must have enough
+room to store all the entity's pads. The number of pads can be retrieved
+with :ref:`MEDIA_IOC_ENUM_ENTITIES`.
+
+If the ``links`` field is not NULL, the driver fills the ``links`` array
+with information about the entity's outbound links. The array must have
+enough room to store all the entity's outbound links. The number of
+outbound links can be retrieved with :ref:`MEDIA_IOC_ENUM_ENTITIES`.
+
+Only forward links that originate at one of the entity's source pads are
+returned during the enumeration process.
+
+
+.. c:type:: media_links_enum
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct media_links_enum
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    *  -  __u32
+       -  ``entity``
+       -  Entity id, set by the application.
+
+    *  -  struct :c:type:`media_pad_desc`
+       -  \*\ ``pads``
+       -  Pointer to a pads array allocated by the application. Ignored if
+	  NULL.
+
+    *  -  struct :c:type:`media_link_desc`
+       -  \*\ ``links``
+       -  Pointer to a links array allocated by the application. Ignored if
+	  NULL.
+
+    *  -  __u32
+       -  ``reserved[4]``
+       -  Reserved for future extensions. Drivers and applications must set
+          the array to zero.
+
+
+.. c:type:: media_pad_desc
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct media_pad_desc
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    *  -  __u32
+       -  ``entity``
+       -  ID of the entity this pad belongs to.
+
+    *  -  __u16
+       -  ``index``
+       -  Pad index, starts at 0.
+
+    *  -  __u32
+       -  ``flags``
+       -  Pad flags, see :ref:`media-pad-flag` for more details.
+
+    *  -  __u32
+       -  ``reserved[2]``
+       -  Reserved for future extensions. Drivers and applications must set
+          the array to zero.
+
+
+
+.. c:type:: media_link_desc
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct media_link_desc
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    *  -  struct :c:type:`media_pad_desc`
+       -  ``source``
+       -  Pad at the origin of this link.
+
+    *  -  struct :c:type:`media_pad_desc`
+       -  ``sink``
+       -  Pad at the target of this link.
+
+    *  -  __u32
+       -  ``flags``
+       -  Link flags, see :ref:`media-link-flag` for more details.
+
+    *  -  __u32
+       -  ``reserved[2]``
+       -  Reserved for future extensions. Drivers and applications must set
+          the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`media_links_enum` ``id``
+    references a non-existing entity.
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst b/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst
new file mode 100644
index 000000000000..54e3112a3b5a
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst
@@ -0,0 +1,307 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_ioc_g_topology:
+
+**************************
+ioctl MEDIA_IOC_G_TOPOLOGY
+**************************
+
+Name
+====
+
+MEDIA_IOC_G_TOPOLOGY - Enumerate the graph topology and graph element properties
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, MEDIA_IOC_G_TOPOLOGY, struct media_v2_topology *argp )
+    :name: MEDIA_IOC_G_TOPOLOGY
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <media-func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`media_v2_topology`.
+
+
+Description
+===========
+
+The typical usage of this ioctl is to call it twice. On the first call,
+the structure defined at struct
+:c:type:`media_v2_topology` should be zeroed. At
+return, if no errors happen, this ioctl will return the
+``topology_version`` and the total number of entities, interfaces, pads
+and links.
+
+Before the second call, the userspace should allocate arrays to store
+the graph elements that are desired, putting the pointers to them at the
+ptr_entities, ptr_interfaces, ptr_links and/or ptr_pads, keeping the
+other values untouched.
+
+If the ``topology_version`` remains the same, the ioctl should fill the
+desired arrays with the media graph elements.
+
+.. tabularcolumns:: |p{1.6cm}|p{3.4cm}|p{12.5cm}|
+
+.. c:type:: media_v2_topology
+
+.. flat-table:: struct media_v2_topology
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 2 8
+
+    *  -  __u64
+       -  ``topology_version``
+       -  Version of the media graph topology. When the graph is created,
+	  this field starts with zero. Every time a graph element is added
+	  or removed, this field is incremented.
+
+    *  -  __u32
+       -  ``num_entities``
+       -  Number of entities in the graph
+
+    *  -  __u32
+       -  ``reserved1``
+       -  Applications and drivers shall set this to 0.
+
+    *  -  __u64
+       -  ``ptr_entities``
+       -  A pointer to a memory area where the entities array will be
+	  stored, converted to a 64-bits integer. It can be zero. if zero,
+	  the ioctl won't store the entities. It will just update
+	  ``num_entities``
+
+    *  -  __u32
+       -  ``num_interfaces``
+       -  Number of interfaces in the graph
+
+    *  -  __u32
+       -  ``reserved2``
+       -  Applications and drivers shall set this to 0.
+
+    *  -  __u64
+       -  ``ptr_interfaces``
+       -  A pointer to a memory area where the interfaces array will be
+	  stored, converted to a 64-bits integer. It can be zero. if zero,
+	  the ioctl won't store the interfaces. It will just update
+	  ``num_interfaces``
+
+    *  -  __u32
+       -  ``num_pads``
+       -  Total number of pads in the graph
+
+    *  -  __u32
+       -  ``reserved3``
+       -  Applications and drivers shall set this to 0.
+
+    *  -  __u64
+       -  ``ptr_pads``
+       -  A pointer to a memory area where the pads array will be stored,
+	  converted to a 64-bits integer. It can be zero. if zero, the ioctl
+	  won't store the pads. It will just update ``num_pads``
+
+    *  -  __u32
+       -  ``num_links``
+       -  Total number of data and interface links in the graph
+
+    *  -  __u32
+       -  ``reserved4``
+       -  Applications and drivers shall set this to 0.
+
+    *  -  __u64
+       -  ``ptr_links``
+       -  A pointer to a memory area where the links array will be stored,
+	  converted to a 64-bits integer. It can be zero. if zero, the ioctl
+	  won't store the links. It will just update ``num_links``
+
+
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+
+.. c:type:: media_v2_entity
+
+.. flat-table:: struct media_v2_entity
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 2 8
+
+    *  -  __u32
+       -  ``id``
+       -  Unique ID for the entity. Do not expect that the ID will
+	  always be the same for each instance of the device. In other words,
+	  do not hardcode entity IDs in an application.
+
+    *  -  char
+       -  ``name``\ [64]
+       -  Entity name as an UTF-8 NULL-terminated string. This name must be unique
+          within the media topology.
+
+    *  -  __u32
+       -  ``function``
+       -  Entity main function, see :ref:`media-entity-functions` for details.
+
+    *  -  __u32
+       -  ``flags``
+       -  Entity flags, see :ref:`media-entity-flag` for details.
+	  Only valid if ``MEDIA_V2_ENTITY_HAS_FLAGS(media_version)``
+	  returns true. The ``media_version`` is defined in struct
+	  :c:type:`media_device_info` and can be retrieved using
+	  :ref:`MEDIA_IOC_DEVICE_INFO`.
+
+    *  -  __u32
+       -  ``reserved``\ [5]
+       -  Reserved for future extensions. Drivers and applications must set
+	  this array to zero.
+
+
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+
+.. c:type:: media_v2_interface
+
+.. flat-table:: struct media_v2_interface
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 2 8
+
+    *  -  __u32
+       -  ``id``
+       -  Unique ID for the interface. Do not expect that the ID will
+	  always be the same for each instance of the device. In other words,
+	  do not hardcode interface IDs in an application.
+
+    *  -  __u32
+       -  ``intf_type``
+       -  Interface type, see :ref:`media-intf-type` for details.
+
+    *  -  __u32
+       -  ``flags``
+       -  Interface flags. Currently unused.
+
+    *  -  __u32
+       -  ``reserved``\ [9]
+       -  Reserved for future extensions. Drivers and applications must set
+	  this array to zero.
+
+    *  -  struct media_v2_intf_devnode
+       -  ``devnode``
+       -  Used only for device node interfaces. See
+	  :c:type:`media_v2_intf_devnode` for details.
+
+
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+
+.. c:type:: media_v2_intf_devnode
+
+.. flat-table:: struct media_v2_intf_devnode
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 2 8
+
+    *  -  __u32
+       -  ``major``
+       -  Device node major number.
+
+    *  -  __u32
+       -  ``minor``
+       -  Device node minor number.
+
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+
+.. c:type:: media_v2_pad
+
+.. flat-table:: struct media_v2_pad
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 2 8
+
+    *  -  __u32
+       -  ``id``
+       -  Unique ID for the pad. Do not expect that the ID will
+	  always be the same for each instance of the device. In other words,
+	  do not hardcode pad IDs in an application.
+
+    *  -  __u32
+       -  ``entity_id``
+       -  Unique ID for the entity where this pad belongs.
+
+    *  -  __u32
+       -  ``flags``
+       -  Pad flags, see :ref:`media-pad-flag` for more details.
+
+    *  -  __u32
+       -  ``index``
+       -  Pad index, starts at 0. Only valid if ``MEDIA_V2_PAD_HAS_INDEX(media_version)``
+	  returns true. The ``media_version`` is defined in struct
+	  :c:type:`media_device_info` and can be retrieved using
+	  :ref:`MEDIA_IOC_DEVICE_INFO`.
+
+    *  -  __u32
+       -  ``reserved``\ [4]
+       -  Reserved for future extensions. Drivers and applications must set
+	  this array to zero.
+
+
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+
+.. c:type:: media_v2_link
+
+.. flat-table:: struct media_v2_link
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 2 8
+
+    *  -  __u32
+       -  ``id``
+       -  Unique ID for the link. Do not expect that the ID will
+	  always be the same for each instance of the device. In other words,
+	  do not hardcode link IDs in an application.
+
+    *  -  __u32
+       -  ``source_id``
+       -  On pad to pad links: unique ID for the source pad.
+
+	  On interface to entity links: unique ID for the interface.
+
+    *  -  __u32
+       -  ``sink_id``
+       -  On pad to pad links: unique ID for the sink pad.
+
+	  On interface to entity links: unique ID for the entity.
+
+    *  -  __u32
+       -  ``flags``
+       -  Link flags, see :ref:`media-link-flag` for more details.
+
+    *  -  __u32
+       -  ``reserved``\ [6]
+       -  Reserved for future extensions. Drivers and applications must set
+	  this array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+ENOSPC
+    This is returned when either one or more of the num_entities,
+    num_interfaces, num_links or num_pads are non-zero and are
+    smaller than the actual number of elements inside the graph. This
+    may happen if the ``topology_version`` changed when compared to the
+    last time this ioctl was called. Userspace should usually free the
+    area for the pointers, zero the struct elements and call this ioctl
+    again.
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst b/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst
new file mode 100644
index 000000000000..82f86466c7f2
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst
@@ -0,0 +1,90 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation version 2 of
+..    the License.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_ioc_request_alloc:
+
+*****************************
+ioctl MEDIA_IOC_REQUEST_ALLOC
+*****************************
+
+Name
+====
+
+MEDIA_IOC_REQUEST_ALLOC - Allocate a request
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, MEDIA_IOC_REQUEST_ALLOC, int *argp )
+    :name: MEDIA_IOC_REQUEST_ALLOC
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <media-func-open>`.
+
+``argp``
+    Pointer to an integer.
+
+
+Description
+===========
+
+If the media device supports :ref:`requests <media-request-api>`, then
+this ioctl can be used to allocate a request. If it is not supported, then
+``errno`` is set to ``ENOTTY``. A request is accessed through a file descriptor
+that is returned in ``*argp``.
+
+If the request was successfully allocated, then the request file descriptor
+can be passed to the :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`,
+:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
+:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and
+:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctls.
+
+In addition, the request can be queued by calling
+:ref:`MEDIA_REQUEST_IOC_QUEUE` and re-initialized by calling
+:ref:`MEDIA_REQUEST_IOC_REINIT`.
+
+Finally, the file descriptor can be :ref:`polled <request-func-poll>` to wait
+for the request to complete.
+
+The request will remain allocated until all the file descriptors associated
+with it are closed by :ref:`close() <request-func-close>` and the driver no
+longer uses the request internally. See also
+:ref:`here <media-request-life-time>` for more information.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+ENOTTY
+    The driver has no support for requests.
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst b/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst
new file mode 100644
index 000000000000..7da3d0028285
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst
@@ -0,0 +1,74 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_ioc_setup_link:
+
+**************************
+ioctl MEDIA_IOC_SETUP_LINK
+**************************
+
+Name
+====
+
+MEDIA_IOC_SETUP_LINK - Modify the properties of a link
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, MEDIA_IOC_SETUP_LINK, struct media_link_desc *argp )
+    :name: MEDIA_IOC_SETUP_LINK
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <media-func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`media_link_desc`.
+
+
+Description
+===========
+
+To change link properties applications fill a struct
+:c:type:`media_link_desc` with link identification
+information (source and sink pad) and the new requested link flags. They
+then call the MEDIA_IOC_SETUP_LINK ioctl with a pointer to that
+structure.
+
+The only configurable property is the ``ENABLED`` link flag to
+enable/disable a link. Links marked with the ``IMMUTABLE`` link flag can
+not be enabled or disabled.
+
+Link configuration has no side effect on other links. If an enabled link
+at the sink pad prevents the link from being enabled, the driver returns
+with an ``EBUSY`` error code.
+
+Only links marked with the ``DYNAMIC`` link flag can be enabled/disabled
+while streaming media data. Attempting to enable or disable a streaming
+non-dynamic link will return an ``EBUSY`` error code.
+
+If the specified link can't be found the driver returns with an ``EINVAL``
+error code.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`media_link_desc` references a
+    non-existing link, or the link is immutable and an attempt to modify
+    its configuration was made.
diff --git a/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst b/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst
new file mode 100644
index 000000000000..ad55b6b32616
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst
@@ -0,0 +1,102 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation version 2 of
+..    the License.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_request_ioc_queue:
+
+*****************************
+ioctl MEDIA_REQUEST_IOC_QUEUE
+*****************************
+
+Name
+====
+
+MEDIA_REQUEST_IOC_QUEUE - Queue a request
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int request_fd, MEDIA_REQUEST_IOC_QUEUE )
+    :name: MEDIA_REQUEST_IOC_QUEUE
+
+
+Arguments
+=========
+
+``request_fd``
+    File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
+
+
+Description
+===========
+
+If the media device supports :ref:`requests <media-request-api>`, then
+this request ioctl can be used to queue a previously allocated request.
+
+If the request was successfully queued, then the file descriptor can be
+:ref:`polled <request-func-poll>` to wait for the request to complete.
+
+If the request was already queued before, then ``EBUSY`` is returned.
+Other errors can be returned if the contents of the request contained
+invalid or inconsistent data, see the next section for a list of
+common error codes. On error both the request and driver state are unchanged.
+
+Once a request is queued, then the driver is required to gracefully handle
+errors that occur when the request is applied to the hardware. The
+exception is the ``EIO`` error which signals a fatal error that requires
+the application to stop streaming to reset the hardware state.
+
+It is not allowed to mix queuing requests with queuing buffers directly
+(without a request). ``EBUSY`` will be returned if the first buffer was
+queued directly and you next try to queue a request, or vice versa.
+
+A request must contain at least one buffer, otherwise this ioctl will
+return an ``ENOENT`` error.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EBUSY
+    The request was already queued or the application queued the first
+    buffer directly, but later attempted to use a request. It is not permitted
+    to mix the two APIs.
+ENOENT
+    The request did not contain any buffers. All requests are required
+    to have at least one buffer. This can also be returned if some required
+    configuration is missing in the request.
+ENOMEM
+    Out of memory when allocating internal data structures for this
+    request.
+EINVAL
+    The request has invalid data.
+EIO
+    The hardware is in a bad state. To recover, the application needs to
+    stop streaming to reset the hardware state and then try to restart
+    streaming.
diff --git a/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst b/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst
new file mode 100644
index 000000000000..4c43fa05c8f6
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst
@@ -0,0 +1,75 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation version 2 of
+..    the License.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_request_ioc_reinit:
+
+******************************
+ioctl MEDIA_REQUEST_IOC_REINIT
+******************************
+
+Name
+====
+
+MEDIA_REQUEST_IOC_REINIT - Re-initialize a request
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int request_fd, MEDIA_REQUEST_IOC_REINIT )
+    :name: MEDIA_REQUEST_IOC_REINIT
+
+
+Arguments
+=========
+
+``request_fd``
+    File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
+
+Description
+===========
+
+If the media device supports :ref:`requests <media-request-api>`, then
+this request ioctl can be used to re-initialize a previously allocated
+request.
+
+Re-initializing a request will clear any existing data from the request.
+This avoids having to :ref:`close() <request-func-close>` a completed
+request and allocate a new request. Instead the completed request can just
+be re-initialized and it is ready to be used again.
+
+A request can only be re-initialized if it either has not been queued
+yet, or if it was queued and completed. Otherwise it will set ``errno``
+to ``EBUSY``. No other error codes can be returned.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately.
+
+EBUSY
+    The request is queued but not yet completed.
diff --git a/Documentation/userspace-api/media/mediactl/media-types.rst b/Documentation/userspace-api/media/mediactl/media-types.rst
new file mode 100644
index 000000000000..77fd4c0c9ebc
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/media-types.rst
@@ -0,0 +1,425 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media-controller-types:
+
+Types and flags used to represent the media graph elements
+==========================================================
+
+..  tabularcolumns:: |p{8.2cm}|p{10.3cm}|
+
+.. _media-entity-functions:
+.. _MEDIA-ENT-F-UNKNOWN:
+.. _MEDIA-ENT-F-V4L2-SUBDEV-UNKNOWN:
+.. _MEDIA-ENT-F-IO-V4L:
+.. _MEDIA-ENT-F-IO-VBI:
+.. _MEDIA-ENT-F-IO-SWRADIO:
+.. _MEDIA-ENT-F-IO-DTV:
+.. _MEDIA-ENT-F-DTV-DEMOD:
+.. _MEDIA-ENT-F-TS-DEMUX:
+.. _MEDIA-ENT-F-DTV-CA:
+.. _MEDIA-ENT-F-DTV-NET-DECAP:
+.. _MEDIA-ENT-F-CONN-RF:
+.. _MEDIA-ENT-F-CONN-SVIDEO:
+.. _MEDIA-ENT-F-CONN-COMPOSITE:
+.. _MEDIA-ENT-F-CAM-SENSOR:
+.. _MEDIA-ENT-F-FLASH:
+.. _MEDIA-ENT-F-LENS:
+.. _MEDIA-ENT-F-ATV-DECODER:
+.. _MEDIA-ENT-F-TUNER:
+.. _MEDIA-ENT-F-IF-VID-DECODER:
+.. _MEDIA-ENT-F-IF-AUD-DECODER:
+.. _MEDIA-ENT-F-AUDIO-CAPTURE:
+.. _MEDIA-ENT-F-AUDIO-PLAYBACK:
+.. _MEDIA-ENT-F-AUDIO-MIXER:
+.. _MEDIA-ENT-F-PROC-VIDEO-COMPOSER:
+.. _MEDIA-ENT-F-PROC-VIDEO-PIXEL-FORMATTER:
+.. _MEDIA-ENT-F-PROC-VIDEO-PIXEL-ENC-CONV:
+.. _MEDIA-ENT-F-PROC-VIDEO-LUT:
+.. _MEDIA-ENT-F-PROC-VIDEO-SCALER:
+.. _MEDIA-ENT-F-PROC-VIDEO-STATISTICS:
+.. _MEDIA-ENT-F-PROC-VIDEO-ENCODER:
+.. _MEDIA-ENT-F-PROC-VIDEO-DECODER:
+.. _MEDIA-ENT-F-VID-MUX:
+.. _MEDIA-ENT-F-VID-IF-BRIDGE:
+.. _MEDIA-ENT-F-DV-DECODER:
+.. _MEDIA-ENT-F-DV-ENCODER:
+
+.. cssclass:: longtable
+
+.. flat-table:: Media entity functions
+    :header-rows:  0
+    :stub-columns: 0
+
+    *  -  ``MEDIA_ENT_F_UNKNOWN`` and
+	  ``MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN``
+       -  Unknown entity. That generally indicates that a driver didn't
+	  initialize properly the entity, which is a Kernel bug
+
+    *  -  ``MEDIA_ENT_F_IO_V4L``
+       -  Data streaming input and/or output entity.
+
+    *  -  ``MEDIA_ENT_F_IO_VBI``
+       -  V4L VBI streaming input or output entity
+
+    *  -  ``MEDIA_ENT_F_IO_SWRADIO``
+       -  V4L Software Digital Radio (SDR) streaming input or output entity
+
+    *  -  ``MEDIA_ENT_F_IO_DTV``
+       -  DVB Digital TV streaming input or output entity
+
+    *  -  ``MEDIA_ENT_F_DTV_DEMOD``
+       -  Digital TV demodulator entity.
+
+    *  -  ``MEDIA_ENT_F_TS_DEMUX``
+       -  MPEG Transport stream demux entity. Could be implemented on
+	  hardware or in Kernelspace by the Linux DVB subsystem.
+
+    *  -  ``MEDIA_ENT_F_DTV_CA``
+       -  Digital TV Conditional Access module (CAM) entity
+
+    *  -  ``MEDIA_ENT_F_DTV_NET_DECAP``
+       -  Digital TV network ULE/MLE desencapsulation entity. Could be
+	  implemented on hardware or in Kernelspace
+
+    *  -  ``MEDIA_ENT_F_CONN_RF``
+       -  Connector for a Radio Frequency (RF) signal.
+
+    *  -  ``MEDIA_ENT_F_CONN_SVIDEO``
+       -  Connector for a S-Video signal.
+
+    *  -  ``MEDIA_ENT_F_CONN_COMPOSITE``
+       -  Connector for a RGB composite signal.
+
+    *  -  ``MEDIA_ENT_F_CAM_SENSOR``
+       -  Camera video sensor entity.
+
+    *  -  ``MEDIA_ENT_F_FLASH``
+       -  Flash controller entity.
+
+    *  -  ``MEDIA_ENT_F_LENS``
+       -  Lens controller entity.
+
+    *  -  ``MEDIA_ENT_F_ATV_DECODER``
+       -  Analog video decoder, the basic function of the video decoder is
+	  to accept analogue video from a wide variety of sources such as
+	  broadcast, DVD players, cameras and video cassette recorders, in
+	  either NTSC, PAL, SECAM or HD format, separating the stream into
+	  its component parts, luminance and chrominance, and output it in
+	  some digital video standard, with appropriate timing signals.
+
+    *  -  ``MEDIA_ENT_F_TUNER``
+       -  Digital TV, analog TV, radio and/or software radio tuner, with
+	  consists on a PLL tuning stage that converts radio frequency (RF)
+	  signal into an Intermediate Frequency (IF). Modern tuners have
+	  internally IF-PLL decoders for audio and video, but older models
+	  have those stages implemented on separate entities.
+
+    *  -  ``MEDIA_ENT_F_IF_VID_DECODER``
+       -  IF-PLL video decoder. It receives the IF from a PLL and decodes
+	  the analog TV video signal. This is commonly found on some very
+	  old analog tuners, like Philips MK3 designs. They all contain a
+	  tda9887 (or some software compatible similar chip, like tda9885).
+	  Those devices use a different I2C address than the tuner PLL.
+
+    *  -  ``MEDIA_ENT_F_IF_AUD_DECODER``
+       -  IF-PLL sound decoder. It receives the IF from a PLL and decodes
+	  the analog TV audio signal. This is commonly found on some very
+	  old analog hardware, like Micronas msp3400, Philips tda9840,
+	  tda985x, etc. Those devices use a different I2C address than the
+	  tuner PLL and should be controlled together with the IF-PLL video
+	  decoder.
+
+    *  -  ``MEDIA_ENT_F_AUDIO_CAPTURE``
+       -  Audio Capture Function Entity.
+
+    *  -  ``MEDIA_ENT_F_AUDIO_PLAYBACK``
+       -  Audio Playback Function Entity.
+
+    *  -  ``MEDIA_ENT_F_AUDIO_MIXER``
+       -  Audio Mixer Function Entity.
+
+    *  -  ``MEDIA_ENT_F_PROC_VIDEO_COMPOSER``
+       -  Video composer (blender). An entity capable of video
+	  composing must have at least two sink pads and one source
+	  pad, and composes input video frames onto output video
+	  frames. Composition can be performed using alpha blending,
+	  color keying, raster operations (ROP), stitching or any other
+	  means.
+
+    *  -  ``MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER``
+       -  Video pixel formatter. An entity capable of pixel formatting
+	  must have at least one sink pad and one source pad. Read
+	  pixel formatters read pixels from memory and perform a subset
+	  of unpacking, cropping, color keying, alpha multiplication
+	  and pixel encoding conversion. Write pixel formatters perform
+	  a subset of dithering, pixel encoding conversion and packing
+	  and write pixels to memory.
+
+    *  -  ``MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV``
+       -  Video pixel encoding converter. An entity capable of pixel
+	  encoding conversion must have at least one sink pad and one
+	  source pad, and convert the encoding of pixels received on
+	  its sink pad(s) to a different encoding output on its source
+	  pad(s). Pixel encoding conversion includes but isn't limited
+	  to RGB to/from HSV, RGB to/from YUV and CFA (Bayer) to RGB
+	  conversions.
+
+    *  -  ``MEDIA_ENT_F_PROC_VIDEO_LUT``
+       -  Video look-up table. An entity capable of video lookup table
+	  processing must have one sink pad and one source pad. It uses
+	  the values of the pixels received on its sink pad to look up
+	  entries in internal tables and output them on its source pad.
+	  The lookup processing can be performed on all components
+	  separately or combine them for multi-dimensional table
+	  lookups.
+
+    *  -  ``MEDIA_ENT_F_PROC_VIDEO_SCALER``
+       -  Video scaler. An entity capable of video scaling must have
+	  at least one sink pad and one source pad, and scale the
+	  video frame(s) received on its sink pad(s) to a different
+	  resolution output on its source pad(s). The range of
+	  supported scaling ratios is entity-specific and can differ
+	  between the horizontal and vertical directions (in particular
+	  scaling can be supported in one direction only). Binning and
+	  sub-sampling (occasionally also referred to as skipping) are
+	  considered as scaling.
+
+    *  -  ``MEDIA_ENT_F_PROC_VIDEO_STATISTICS``
+       -  Video statistics computation (histogram, 3A, etc.). An entity
+	  capable of statistics computation must have one sink pad and
+	  one source pad. It computes statistics over the frames
+	  received on its sink pad and outputs the statistics data on
+	  its source pad.
+
+    *  -  ``MEDIA_ENT_F_PROC_VIDEO_ENCODER``
+       -  Video (MPEG, HEVC, VPx, etc.) encoder. An entity capable of
+          compressing video frames. Must have one sink pad and at least
+	  one source pad.
+
+    *  -  ``MEDIA_ENT_F_PROC_VIDEO_DECODER``
+       -  Video (MPEG, HEVC, VPx, etc.) decoder. An entity capable of
+          decompressing a compressed video stream into uncompressed video
+	  frames. Must have one sink pad and at least one source pad.
+
+    *  -  ``MEDIA_ENT_F_VID_MUX``
+       - Video multiplexer. An entity capable of multiplexing must have at
+         least two sink pads and one source pad, and must pass the video
+         frame(s) received from the active sink pad to the source pad.
+
+    *  -  ``MEDIA_ENT_F_VID_IF_BRIDGE``
+       - Video interface bridge. A video interface bridge entity must have at
+         least one sink pad and at least one source pad. It receives video
+         frames on its sink pad from an input video bus of one type (HDMI, eDP,
+         MIPI CSI-2, etc.), and outputs them on its source pad to an output
+         video bus of another type (eDP, MIPI CSI-2, parallel, etc.).
+
+    *  -  ``MEDIA_ENT_F_DV_DECODER``
+       -  Digital video decoder. The basic function of the video decoder is
+	  to accept digital video from a wide variety of sources
+	  and output it in some digital video standard, with appropriate
+	  timing signals.
+
+    *  -  ``MEDIA_ENT_F_DV_ENCODER``
+       -  Digital video encoder. The basic function of the video encoder is
+	  to accept digital video from some digital video standard with
+	  appropriate timing signals (usually a parallel video bus with sync
+	  signals) and output this to a digital video output connector such
+	  as HDMI or DisplayPort.
+
+..  tabularcolumns:: |p{5.5cm}|p{12.0cm}|
+
+.. _media-entity-flag:
+.. _MEDIA-ENT-FL-DEFAULT:
+.. _MEDIA-ENT-FL-CONNECTOR:
+
+.. flat-table:: Media entity flags
+    :header-rows:  0
+    :stub-columns: 0
+
+    *  -  ``MEDIA_ENT_FL_DEFAULT``
+       -  Default entity for its type. Used to discover the default audio,
+	  VBI and video devices, the default camera sensor, etc.
+
+    *  -  ``MEDIA_ENT_FL_CONNECTOR``
+       -  The entity represents a connector.
+
+
+..  tabularcolumns:: |p{6.5cm}|p{6.0cm}|p{5.0cm}|
+
+.. _media-intf-type:
+.. _MEDIA-INTF-T-DVB-FE:
+.. _MEDIA-INTF-T-DVB-DEMUX:
+.. _MEDIA-INTF-T-DVB-DVR:
+.. _MEDIA-INTF-T-DVB-CA:
+.. _MEDIA-INTF-T-DVB-NET:
+.. _MEDIA-INTF-T-V4L-VIDEO:
+.. _MEDIA-INTF-T-V4L-VBI:
+.. _MEDIA-INTF-T-V4L-RADIO:
+.. _MEDIA-INTF-T-V4L-SUBDEV:
+.. _MEDIA-INTF-T-V4L-SWRADIO:
+.. _MEDIA-INTF-T-V4L-TOUCH:
+.. _MEDIA-INTF-T-ALSA-PCM-CAPTURE:
+.. _MEDIA-INTF-T-ALSA-PCM-PLAYBACK:
+.. _MEDIA-INTF-T-ALSA-CONTROL:
+.. _MEDIA-INTF-T-ALSA-COMPRESS:
+.. _MEDIA-INTF-T-ALSA-RAWMIDI:
+.. _MEDIA-INTF-T-ALSA-HWDEP:
+.. _MEDIA-INTF-T-ALSA-SEQUENCER:
+.. _MEDIA-INTF-T-ALSA-TIMER:
+
+.. flat-table:: Media interface types
+    :header-rows:  0
+    :stub-columns: 0
+
+    *  -  ``MEDIA_INTF_T_DVB_FE``
+       -  Device node interface for the Digital TV frontend
+       -  typically, /dev/dvb/adapter?/frontend?
+
+    *  -  ``MEDIA_INTF_T_DVB_DEMUX``
+       -  Device node interface for the Digital TV demux
+       -  typically, /dev/dvb/adapter?/demux?
+
+    *  -  ``MEDIA_INTF_T_DVB_DVR``
+       -  Device node interface for the Digital TV DVR
+       -  typically, /dev/dvb/adapter?/dvr?
+
+    *  -  ``MEDIA_INTF_T_DVB_CA``
+       -  Device node interface for the Digital TV Conditional Access
+       -  typically, /dev/dvb/adapter?/ca?
+
+    *  -  ``MEDIA_INTF_T_DVB_NET``
+       -  Device node interface for the Digital TV network control
+       -  typically, /dev/dvb/adapter?/net?
+
+    *  -  ``MEDIA_INTF_T_V4L_VIDEO``
+       -  Device node interface for video (V4L)
+       -  typically, /dev/video?
+
+    *  -  ``MEDIA_INTF_T_V4L_VBI``
+       -  Device node interface for VBI (V4L)
+       -  typically, /dev/vbi?
+
+    *  -  ``MEDIA_INTF_T_V4L_RADIO``
+       -  Device node interface for radio (V4L)
+       -  typically, /dev/radio?
+
+    *  -  ``MEDIA_INTF_T_V4L_SUBDEV``
+       -  Device node interface for a V4L subdevice
+       -  typically, /dev/v4l-subdev?
+
+    *  -  ``MEDIA_INTF_T_V4L_SWRADIO``
+       -  Device node interface for Software Defined Radio (V4L)
+       -  typically, /dev/swradio?
+
+    *  -  ``MEDIA_INTF_T_V4L_TOUCH``
+       -  Device node interface for Touch device (V4L)
+       -  typically, /dev/v4l-touch?
+
+    *  -  ``MEDIA_INTF_T_ALSA_PCM_CAPTURE``
+       -  Device node interface for ALSA PCM Capture
+       -  typically, /dev/snd/pcmC?D?c
+
+    *  -  ``MEDIA_INTF_T_ALSA_PCM_PLAYBACK``
+       -  Device node interface for ALSA PCM Playback
+       -  typically, /dev/snd/pcmC?D?p
+
+    *  -  ``MEDIA_INTF_T_ALSA_CONTROL``
+       -  Device node interface for ALSA Control
+       -  typically, /dev/snd/controlC?
+
+    *  -  ``MEDIA_INTF_T_ALSA_COMPRESS``
+       -  Device node interface for ALSA Compress
+       -  typically, /dev/snd/compr?
+
+    *  -  ``MEDIA_INTF_T_ALSA_RAWMIDI``
+       -  Device node interface for ALSA Raw MIDI
+       -  typically, /dev/snd/midi?
+
+    *  -  ``MEDIA_INTF_T_ALSA_HWDEP``
+       -  Device node interface for ALSA Hardware Dependent
+       -  typically, /dev/snd/hwC?D?
+
+    *  -  ``MEDIA_INTF_T_ALSA_SEQUENCER``
+       -  Device node interface for ALSA Sequencer
+       -  typically, /dev/snd/seq
+
+    *  -  ``MEDIA_INTF_T_ALSA_TIMER``
+       -  Device node interface for ALSA Timer
+       -  typically, /dev/snd/timer
+
+
+.. tabularcolumns:: |p{5.5cm}|p{12.0cm}|
+
+.. _media-pad-flag:
+.. _MEDIA-PAD-FL-SINK:
+.. _MEDIA-PAD-FL-SOURCE:
+.. _MEDIA-PAD-FL-MUST-CONNECT:
+
+.. flat-table:: Media pad flags
+    :header-rows:  0
+    :stub-columns: 0
+
+    *  -  ``MEDIA_PAD_FL_SINK``
+       -  Input pad, relative to the entity. Input pads sink data and are
+	  targets of links.
+
+    *  -  ``MEDIA_PAD_FL_SOURCE``
+       -  Output pad, relative to the entity. Output pads source data and
+	  are origins of links.
+
+    *  -  ``MEDIA_PAD_FL_MUST_CONNECT``
+       -  If this flag is set and the pad is linked to any other pad, then
+	  at least one of those links must be enabled for the entity to be
+	  able to stream. There could be temporary reasons (e.g. device
+	  configuration dependent) for the pad to need enabled links even
+	  when this flag isn't set; the absence of the flag doesn't imply
+	  there is none.
+
+
+One and only one of ``MEDIA_PAD_FL_SINK`` and ``MEDIA_PAD_FL_SOURCE``
+must be set for every pad.
+
+.. tabularcolumns:: |p{5.5cm}|p{12.0cm}|
+
+.. _media-link-flag:
+.. _MEDIA-LNK-FL-ENABLED:
+.. _MEDIA-LNK-FL-IMMUTABLE:
+.. _MEDIA-LNK-FL-DYNAMIC:
+.. _MEDIA-LNK-FL-LINK-TYPE:
+
+.. flat-table:: Media link flags
+    :header-rows:  0
+    :stub-columns: 0
+
+    *  -  ``MEDIA_LNK_FL_ENABLED``
+       -  The link is enabled and can be used to transfer media data. When
+	  two or more links target a sink pad, only one of them can be
+	  enabled at a time.
+
+    *  -  ``MEDIA_LNK_FL_IMMUTABLE``
+       -  The link enabled state can't be modified at runtime. An immutable
+	  link is always enabled.
+
+    *  -  ``MEDIA_LNK_FL_DYNAMIC``
+       -  The link enabled state can be modified during streaming. This flag
+	  is set by drivers and is read-only for applications.
+
+    *  -  ``MEDIA_LNK_FL_LINK_TYPE``
+       -  This is a bitmask that defines the type of the link. Currently,
+	  two types of links are supported:
+
+	  .. _MEDIA-LNK-FL-DATA-LINK:
+
+	  ``MEDIA_LNK_FL_DATA_LINK`` if the link is between two pads
+
+	  .. _MEDIA-LNK-FL-INTERFACE-LINK:
+
+	  ``MEDIA_LNK_FL_INTERFACE_LINK`` if the link is between an
+	  interface and an entity
diff --git a/Documentation/userspace-api/media/mediactl/request-api.rst b/Documentation/userspace-api/media/mediactl/request-api.rst
new file mode 100644
index 000000000000..37d9442a541e
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/request-api.rst
@@ -0,0 +1,276 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation version 2 of
+..    the License.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media-request-api:
+
+Request API
+===========
+
+The Request API has been designed to allow V4L2 to deal with requirements of
+modern devices (stateless codecs, complex camera pipelines, ...) and APIs
+(Android Codec v2). One such requirement is the ability for devices belonging to
+the same pipeline to reconfigure and collaborate closely on a per-frame basis.
+Another is support of stateless codecs, which require controls to be applied
+to specific frames (aka 'per-frame controls') in order to be used efficiently.
+
+While the initial use-case was V4L2, it can be extended to other subsystems
+as well, as long as they use the media controller.
+
+Supporting these features without the Request API is not always possible and if
+it is, it is terribly inefficient: user-space would have to flush all activity
+on the media pipeline, reconfigure it for the next frame, queue the buffers to
+be processed with that configuration, and wait until they are all available for
+dequeuing before considering the next frame. This defeats the purpose of having
+buffer queues since in practice only one buffer would be queued at a time.
+
+The Request API allows a specific configuration of the pipeline (media
+controller topology + configuration for each media entity) to be associated with
+specific buffers. This allows user-space to schedule several tasks ("requests")
+with different configurations in advance, knowing that the configuration will be
+applied when needed to get the expected result. Configuration values at the time
+of request completion are also available for reading.
+
+General Usage
+-------------
+
+The Request API extends the Media Controller API and cooperates with
+subsystem-specific APIs to support request usage. At the Media Controller
+level, requests are allocated from the supporting Media Controller device
+node. Their life cycle is then managed through the request file descriptors in
+an opaque way. Configuration data, buffer handles and processing results
+stored in requests are accessed through subsystem-specific APIs extended for
+request support, such as V4L2 APIs that take an explicit ``request_fd``
+parameter.
+
+Request Allocation
+------------------
+
+User-space allocates requests using :ref:`MEDIA_IOC_REQUEST_ALLOC`
+for the media device node. This returns a file descriptor representing the
+request. Typically, several such requests will be allocated.
+
+Request Preparation
+-------------------
+
+Standard V4L2 ioctls can then receive a request file descriptor to express the
+fact that the ioctl is part of said request, and is not to be applied
+immediately. See :ref:`MEDIA_IOC_REQUEST_ALLOC` for a list of ioctls that
+support this. Configurations set with a ``request_fd`` parameter are stored
+instead of being immediately applied, and buffers queued to a request do not
+enter the regular buffer queue until the request itself is queued.
+
+Request Submission
+------------------
+
+Once the configuration and buffers of the request are specified, it can be
+queued by calling :ref:`MEDIA_REQUEST_IOC_QUEUE` on the request file descriptor.
+A request must contain at least one buffer, otherwise ``ENOENT`` is returned.
+A queued request cannot be modified anymore.
+
+.. caution::
+   For :ref:`memory-to-memory devices <mem2mem>` you can use requests only for
+   output buffers, not for capture buffers. Attempting to add a capture buffer
+   to a request will result in an ``EBADR`` error.
+
+If the request contains configurations for multiple entities, individual drivers
+may synchronize so the requested pipeline's topology is applied before the
+buffers are processed. Media controller drivers do a best effort implementation
+since perfect atomicity may not be possible due to hardware limitations.
+
+.. caution::
+
+   It is not allowed to mix queuing requests with directly queuing buffers:
+   whichever method is used first locks this in place until
+   :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called or the device is
+   :ref:`closed <func-close>`. Attempts to directly queue a buffer when earlier
+   a buffer was queued via a request or vice versa will result in an ``EBUSY``
+   error.
+
+Controls can still be set without a request and are applied immediately,
+regardless of whether a request is in use or not.
+
+.. caution::
+
+   Setting the same control through a request and also directly can lead to
+   undefined behavior!
+
+User-space can :ref:`poll() <request-func-poll>` a request file descriptor in
+order to wait until the request completes. A request is considered complete
+once all its associated buffers are available for dequeuing and all the
+associated controls have been updated with the values at the time of completion.
+Note that user-space does not need to wait for the request to complete to
+dequeue its buffers: buffers that are available halfway through a request can
+be dequeued independently of the request's state.
+
+A completed request contains the state of the device after the request was
+executed. User-space can query that state by calling
+:ref:`ioctl VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` with the request file
+descriptor. Calling :ref:`ioctl VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` for a
+request that has been queued but not yet completed will return ``EBUSY``
+since the control values might be changed at any time by the driver while the
+request is in flight.
+
+.. _media-request-life-time:
+
+Recycling and Destruction
+-------------------------
+
+Finally, a completed request can either be discarded or be reused. Calling
+:ref:`close() <request-func-close>` on a request file descriptor will make
+that file descriptor unusable and the request will be freed once it is no
+longer in use by the kernel. That is, if the request is queued and then the
+file descriptor is closed, then it won't be freed until the driver completed
+the request.
+
+The :ref:`MEDIA_REQUEST_IOC_REINIT` will clear a request's state and make it
+available again. No state is retained by this operation: the request is as
+if it had just been allocated.
+
+Example for a Codec Device
+--------------------------
+
+For use-cases such as :ref:`codecs <mem2mem>`, the request API can be used
+to associate specific controls to
+be applied by the driver for the OUTPUT buffer, allowing user-space
+to queue many such buffers in advance. It can also take advantage of requests'
+ability to capture the state of controls when the request completes to read back
+information that may be subject to change.
+
+Put into code, after obtaining a request, user-space can assign controls and one
+OUTPUT buffer to it:
+
+.. code-block:: c
+
+	struct v4l2_buffer buf;
+	struct v4l2_ext_controls ctrls;
+	int req_fd;
+	...
+	if (ioctl(media_fd, MEDIA_IOC_REQUEST_ALLOC, &req_fd))
+		return errno;
+	...
+	ctrls.which = V4L2_CTRL_WHICH_REQUEST_VAL;
+	ctrls.request_fd = req_fd;
+	if (ioctl(codec_fd, VIDIOC_S_EXT_CTRLS, &ctrls))
+		return errno;
+	...
+	buf.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	buf.flags |= V4L2_BUF_FLAG_REQUEST_FD;
+	buf.request_fd = req_fd;
+	if (ioctl(codec_fd, VIDIOC_QBUF, &buf))
+		return errno;
+
+Note that it is not allowed to use the Request API for CAPTURE buffers
+since there are no per-frame settings to report there.
+
+Once the request is fully prepared, it can be queued to the driver:
+
+.. code-block:: c
+
+	if (ioctl(req_fd, MEDIA_REQUEST_IOC_QUEUE))
+		return errno;
+
+User-space can then either wait for the request to complete by calling poll() on
+its file descriptor, or start dequeuing CAPTURE buffers. Most likely, it will
+want to get CAPTURE buffers as soon as possible and this can be done using a
+regular :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`:
+
+.. code-block:: c
+
+	struct v4l2_buffer buf;
+
+	memset(&buf, 0, sizeof(buf));
+	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	if (ioctl(codec_fd, VIDIOC_DQBUF, &buf))
+		return errno;
+
+Note that this example assumes for simplicity that for every OUTPUT buffer
+there will be one CAPTURE buffer, but this does not have to be the case.
+
+We can then, after ensuring that the request is completed via polling the
+request file descriptor, query control values at the time of its completion via
+a call to :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`.
+This is particularly useful for volatile controls for which we want to
+query values as soon as the capture buffer is produced.
+
+.. code-block:: c
+
+	struct pollfd pfd = { .events = POLLPRI, .fd = req_fd };
+	poll(&pfd, 1, -1);
+	...
+	ctrls.which = V4L2_CTRL_WHICH_REQUEST_VAL;
+	ctrls.request_fd = req_fd;
+	if (ioctl(codec_fd, VIDIOC_G_EXT_CTRLS, &ctrls))
+		return errno;
+
+Once we don't need the request anymore, we can either recycle it for reuse with
+:ref:`MEDIA_REQUEST_IOC_REINIT`...
+
+.. code-block:: c
+
+	if (ioctl(req_fd, MEDIA_REQUEST_IOC_REINIT))
+		return errno;
+
+... or close its file descriptor to completely dispose of it.
+
+.. code-block:: c
+
+	close(req_fd);
+
+Example for a Simple Capture Device
+-----------------------------------
+
+With a simple capture device, requests can be used to specify controls to apply
+for a given CAPTURE buffer.
+
+.. code-block:: c
+
+	struct v4l2_buffer buf;
+	struct v4l2_ext_controls ctrls;
+	int req_fd;
+	...
+	if (ioctl(media_fd, MEDIA_IOC_REQUEST_ALLOC, &req_fd))
+		return errno;
+	...
+	ctrls.which = V4L2_CTRL_WHICH_REQUEST_VAL;
+	ctrls.request_fd = req_fd;
+	if (ioctl(camera_fd, VIDIOC_S_EXT_CTRLS, &ctrls))
+		return errno;
+	...
+	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	buf.flags |= V4L2_BUF_FLAG_REQUEST_FD;
+	buf.request_fd = req_fd;
+	if (ioctl(camera_fd, VIDIOC_QBUF, &buf))
+		return errno;
+
+Once the request is fully prepared, it can be queued to the driver:
+
+.. code-block:: c
+
+	if (ioctl(req_fd, MEDIA_REQUEST_IOC_QUEUE))
+		return errno;
+
+User-space can then dequeue buffers, wait for the request completion, query
+controls and recycle the request as in the M2M example above.
diff --git a/Documentation/userspace-api/media/mediactl/request-func-close.rst b/Documentation/userspace-api/media/mediactl/request-func-close.rst
new file mode 100644
index 000000000000..9618b5139764
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/request-func-close.rst
@@ -0,0 +1,73 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation version 2 of
+..    the License.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _request-func-close:
+
+***************
+request close()
+***************
+
+Name
+====
+
+request-close - Close a request file descriptor
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: int close( int fd )
+    :name: req-close
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
+
+
+Description
+===========
+
+Closes the request file descriptor. Resources associated with the request
+are freed once all file descriptors associated with the request are closed
+and the driver has completed the request.
+See :ref:`here <media-request-life-time>` for more information.
+
+
+Return Value
+============
+
+:ref:`close() <request-func-close>` returns 0 on success. On error, -1 is
+returned, and ``errno`` is set appropriately. Possible error codes are:
+
+EBADF
+    ``fd`` is not a valid open file descriptor.
diff --git a/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst b/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst
new file mode 100644
index 000000000000..4bf985205bcc
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst
@@ -0,0 +1,91 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation version 2 of
+..    the License.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _request-func-ioctl:
+
+***************
+request ioctl()
+***************
+
+Name
+====
+
+request-ioctl - Control a request file descriptor
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <sys/ioctl.h>
+
+
+.. c:function:: int ioctl( int fd, int cmd, void *argp )
+    :name: req-ioctl
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
+
+``cmd``
+    The request ioctl command code as defined in the media.h header file, for
+    example :ref:`MEDIA_REQUEST_IOC_QUEUE`.
+
+``argp``
+    Pointer to a request-specific structure.
+
+
+Description
+===========
+
+The :ref:`ioctl() <request-func-ioctl>` function manipulates request
+parameters. The argument ``fd`` must be an open file descriptor.
+
+The ioctl ``cmd`` code specifies the request function to be called. It
+has encoded in it whether the argument is an input, output or read/write
+parameter, and the size of the argument ``argp`` in bytes.
+
+Macros and structures definitions specifying request ioctl commands and
+their parameters are located in the media.h header file. All request ioctl
+commands, their respective function and parameters are specified in
+:ref:`media-user-func`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+Command-specific error codes are listed in the individual command
+descriptions.
+
+When an ioctl that takes an output or read/write parameter fails, the
+parameter remains unmodified.
diff --git a/Documentation/userspace-api/media/mediactl/request-func-poll.rst b/Documentation/userspace-api/media/mediactl/request-func-poll.rst
new file mode 100644
index 000000000000..85a3427e5913
--- /dev/null
+++ b/Documentation/userspace-api/media/mediactl/request-func-poll.rst
@@ -0,0 +1,101 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation version 2 of
+..    the License.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _request-func-poll:
+
+**************
+request poll()
+**************
+
+Name
+====
+
+request-poll - Wait for some event on a file descriptor
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <sys/poll.h>
+
+
+.. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout )
+   :name: request-poll
+
+Arguments
+=========
+
+``ufds``
+   List of file descriptor events to be watched
+
+``nfds``
+   Number of file descriptor events at the \*ufds array
+
+``timeout``
+   Timeout to wait for events
+
+
+Description
+===========
+
+With the :c:func:`poll() <request-func-poll>` function applications can wait
+for a request to complete.
+
+On success :c:func:`poll() <request-func-poll>` returns the number of file
+descriptors that have been selected (that is, file descriptors for which the
+``revents`` field of the respective struct :c:type:`pollfd`
+is non-zero). Request file descriptor set the ``POLLPRI`` flag in ``revents``
+when the request was completed.  When the function times out it returns
+a value of zero, on failure it returns -1 and the ``errno`` variable is
+set appropriately.
+
+Attempting to poll for a request that is not yet queued will
+set the ``POLLERR`` flag in ``revents``.
+
+
+Return Value
+============
+
+On success, :c:func:`poll() <request-func-poll>` returns the number of
+structures which have non-zero ``revents`` fields, or zero if the call
+timed out. On error -1 is returned, and the ``errno`` variable is set
+appropriately:
+
+``EBADF``
+    One or more of the ``ufds`` members specify an invalid file
+    descriptor.
+
+``EFAULT``
+    ``ufds`` references an inaccessible memory area.
+
+``EINTR``
+    The call was interrupted by a signal.
+
+``EINVAL``
+    The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use
+    ``getrlimit()`` to obtain this value.
diff --git a/Documentation/userspace-api/media/net.h.rst.exceptions b/Documentation/userspace-api/media/net.h.rst.exceptions
new file mode 100644
index 000000000000..5159aa4bbbb9
--- /dev/null
+++ b/Documentation/userspace-api/media/net.h.rst.exceptions
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define _DVBNET_H_
+
+# Ignore old ioctls/structs
+ignore ioctl __NET_ADD_IF_OLD
+ignore ioctl __NET_GET_IF_OLD
+ignore struct __dvb_net_if_old
+
+# Macros used at struct dvb_net_if
+replace define DVB_NET_FEEDTYPE_MPE :c:type:`dvb_net_if`
+replace define DVB_NET_FEEDTYPE_ULE :c:type:`dvb_net_if`
diff --git a/Documentation/userspace-api/media/rc/keytable.c.rst b/Documentation/userspace-api/media/rc/keytable.c.rst
new file mode 100644
index 000000000000..901d33d37843
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/keytable.c.rst
@@ -0,0 +1,183 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+file: uapi/v4l/keytable.c
+=========================
+
+.. code-block:: c
+
+    /* keytable.c - This program allows checking/replacing keys at IR
+
+       Copyright (C) 2006-2009 Mauro Carvalho Chehab <mchehab@kernel.org>
+
+       This program is free software; you can redistribute it and/or modify
+       it under the terms of the GNU General Public License as published by
+       the Free Software Foundation, version 2 of the License.
+
+       This program is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+       GNU General Public License for more details.
+     */
+
+    #include <ctype.h>
+    #include <errno.h>
+    #include <fcntl.h>
+    #include <stdio.h>
+    #include <stdlib.h>
+    #include <string.h>
+    #include <linux/input.h>
+    #include <sys/ioctl.h>
+
+    #include "parse.h"
+
+    void prtcode (int *codes)
+    {
+	    struct parse_key *p;
+
+	    for (p=keynames;p->name!=NULL;p++) {
+		    if (p->value == (unsigned)codes[1]) {
+			    printf("scancode 0x%04x = %s (0x%02x)\\n", codes[0], p->name, codes[1]);
+			    return;
+		    }
+	    }
+
+	    if (isprint (codes[1]))
+		    printf("scancode %d = '%c' (0x%02x)\\n", codes[0], codes[1], codes[1]);
+	    else
+		    printf("scancode %d = 0x%02x\\n", codes[0], codes[1]);
+    }
+
+    int parse_code(char *string)
+    {
+	    struct parse_key *p;
+
+	    for (p=keynames;p->name!=NULL;p++) {
+		    if (!strcasecmp(p->name, string)) {
+			    return p->value;
+		    }
+	    }
+	    return -1;
+    }
+
+    int main (int argc, char *argv[])
+    {
+	    int fd;
+	    unsigned int i, j;
+	    int codes[2];
+
+	    if (argc<2 || argc>4) {
+		    printf ("usage: %s <device> to get table; or\\n"
+			    "       %s <device> <scancode> <keycode>\\n"
+			    "       %s <device> <keycode_file>n",*argv,*argv,*argv);
+		    return -1;
+	    }
+
+	    if ((fd = open(argv[1], O_RDONLY)) < 0) {
+		    perror("Couldn't open input device");
+		    return(-1);
+	    }
+
+	    if (argc==4) {
+		    int value;
+
+		    value=parse_code(argv[3]);
+
+		    if (value==-1) {
+			    value = strtol(argv[3], NULL, 0);
+			    if (errno)
+				    perror("value");
+		    }
+
+		    codes [0] = (unsigned) strtol(argv[2], NULL, 0);
+		    codes [1] = (unsigned) value;
+
+		    if(ioctl(fd, EVIOCSKEYCODE, codes))
+			    perror ("EVIOCSKEYCODE");
+
+		    if(ioctl(fd, EVIOCGKEYCODE, codes)==0)
+			    prtcode(codes);
+		    return 0;
+	    }
+
+	    if (argc==3) {
+		    FILE *fin;
+		    int value;
+		    char *scancode, *keycode, s[2048];
+
+		    fin=fopen(argv[2],"r");
+		    if (fin==NULL) {
+			    perror ("opening keycode file");
+			    return -1;
+		    }
+
+		    /* Clears old table */
+		    for (j = 0; j < 256; j++) {
+			    for (i = 0; i < 256; i++) {
+				    codes[0] = (j << 8) | i;
+				    codes[1] = KEY_RESERVED;
+				    ioctl(fd, EVIOCSKEYCODE, codes);
+			    }
+		    }
+
+		    while (fgets(s,sizeof(s),fin)) {
+			    scancode=strtok(s,"\\n\\t =:");
+			    if (!scancode) {
+				    perror ("parsing input file scancode");
+				    return -1;
+			    }
+			    if (!strcasecmp(scancode, "scancode")) {
+				    scancode = strtok(NULL,"\\n\\t =:");
+				    if (!scancode) {
+					    perror ("parsing input file scancode");
+					    return -1;
+				    }
+			    }
+
+			    keycode=strtok(NULL,"\\n\\t =:(");
+			    if (!keycode) {
+				    perror ("parsing input file keycode");
+				    return -1;
+			    }
+
+			    // printf ("parsing %s=%s:", scancode, keycode);
+			    value=parse_code(keycode);
+			    // printf ("\\tvalue=%d\\n",value);
+
+			    if (value==-1) {
+				    value = strtol(keycode, NULL, 0);
+				    if (errno)
+					    perror("value");
+			    }
+
+			    codes [0] = (unsigned) strtol(scancode, NULL, 0);
+			    codes [1] = (unsigned) value;
+
+			    // printf("\\t%04x=%04x\\n",codes[0], codes[1]);
+			    if(ioctl(fd, EVIOCSKEYCODE, codes)) {
+				    fprintf(stderr, "Setting scancode 0x%04x with 0x%04x via ",codes[0], codes[1]);
+				    perror ("EVIOCSKEYCODE");
+			    }
+
+			    if(ioctl(fd, EVIOCGKEYCODE, codes)==0)
+				    prtcode(codes);
+		    }
+		    return 0;
+	    }
+
+	    /* Get scancode table */
+	    for (j = 0; j < 256; j++) {
+		    for (i = 0; i < 256; i++) {
+			    codes[0] = (j << 8) | i;
+			    if (!ioctl(fd, EVIOCGKEYCODE, codes) && codes[1] != KEY_RESERVED)
+				    prtcode(codes);
+		    }
+	    }
+	    return 0;
+    }
diff --git a/Documentation/userspace-api/media/rc/lirc-dev-intro.rst b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst
new file mode 100644
index 000000000000..0c3d70ded55d
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst
@@ -0,0 +1,171 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_dev_intro:
+
+************
+Introduction
+************
+
+LIRC stands for Linux Infrared Remote Control. The LIRC device interface is
+a bi-directional interface for transporting raw IR and decoded scancodes
+data between userspace and kernelspace. Fundamentally, it is just a chardev
+(/dev/lircX, for X = 0, 1, 2, ...), with a number of standard struct
+file_operations defined on it. With respect to transporting raw IR and
+decoded scancodes to and fro, the essential fops are read, write and ioctl.
+
+It is also possible to attach a BPF program to a LIRC device for decoding
+raw IR into scancodes.
+
+Example dmesg output upon a driver registering w/LIRC:
+
+.. code-block:: none
+
+    $ dmesg |grep lirc_dev
+    rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, raw IR transmitter
+
+What you should see for a chardev:
+
+.. code-block:: none
+
+    $ ls -l /dev/lirc*
+    crw-rw---- 1 root root 248, 0 Jul 2 22:20 /dev/lirc0
+
+Note that the package `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_
+contains tools for working with LIRC devices:
+
+ - ir-ctl: can receive raw IR and transmit IR, as well as query LIRC
+   device features.
+
+ - ir-keytable: can load keymaps; allows you to set IR kernel protocols; load
+   BPF IR decoders and test IR decoding. Some BPF IR decoders are also
+   provided.
+
+.. _lirc_modes:
+
+**********
+LIRC modes
+**********
+
+LIRC supports some modes of receiving and sending IR codes, as shown
+on the following table.
+
+.. _lirc-mode-scancode:
+.. _lirc-scancode-flag-toggle:
+.. _lirc-scancode-flag-repeat:
+
+``LIRC_MODE_SCANCODE``
+
+    This mode is for both sending and receiving IR.
+
+    For transmitting (aka sending), create a ``struct lirc_scancode`` with
+    the desired scancode set in the ``scancode`` member, :c:type:`rc_proto`
+    set to the :ref:`IR protocol <Remote_controllers_Protocols>`, and all other
+    members set to 0. Write this struct to the lirc device.
+
+    For receiving, you read ``struct lirc_scancode`` from the LIRC device.
+    The ``scancode`` field is set to the received scancode and the
+    :ref:`IR protocol <Remote_controllers_Protocols>` is set in
+    :c:type:`rc_proto`. If the scancode maps to a valid key code, this is set
+    in the ``keycode`` field, else it is set to ``KEY_RESERVED``.
+
+    The ``flags`` can have ``LIRC_SCANCODE_FLAG_TOGGLE`` set if the toggle
+    bit is set in protocols that support it (e.g. rc-5 and rc-6), or
+    ``LIRC_SCANCODE_FLAG_REPEAT`` for when a repeat is received for protocols
+    that support it (e.g. nec).
+
+    In the Sanyo and NEC protocol, if you hold a button on remote, rather than
+    repeating the entire scancode, the remote sends a shorter message with
+    no scancode, which just means button is held, a "repeat". When this is
+    received, the ``LIRC_SCANCODE_FLAG_REPEAT`` is set and the scancode and
+    keycode is repeated.
+
+    With nec, there is no way to distinguish "button hold" from "repeatedly
+    pressing the same button". The rc-5 and rc-6 protocols have a toggle bit.
+    When a button is released and pressed again, the toggle bit is inverted.
+    If the toggle bit is set, the ``LIRC_SCANCODE_FLAG_TOGGLE`` is set.
+
+    The ``timestamp`` field is filled with the time nanoseconds
+    (in ``CLOCK_MONOTONIC``) when the scancode was decoded.
+
+.. _lirc-mode-mode2:
+
+``LIRC_MODE_MODE2``
+
+    The driver returns a sequence of pulse and space codes to userspace,
+    as a series of u32 values.
+
+    This mode is used only for IR receive.
+
+    The upper 8 bits determine the packet type, and the lower 24 bits
+    the payload. Use ``LIRC_VALUE()`` macro to get the payload, and
+    the macro ``LIRC_MODE2()`` will give you the type, which
+    is one of:
+
+    ``LIRC_MODE2_PULSE``
+
+        Signifies the presence of IR in microseconds.
+
+    ``LIRC_MODE2_SPACE``
+
+        Signifies absence of IR in microseconds.
+
+    ``LIRC_MODE2_FREQUENCY``
+
+        If measurement of the carrier frequency was enabled with
+        :ref:`lirc_set_measure_carrier_mode` then this packet gives you
+        the carrier frequency in Hertz.
+
+    ``LIRC_MODE2_TIMEOUT``
+
+        If timeout reports are enabled with
+        :ref:`lirc_set_rec_timeout_reports`, when the timeout set with
+        :ref:`lirc_set_rec_timeout` expires due to no IR being detected,
+        this packet will be sent, with the number of microseconds with
+        no IR.
+
+.. _lirc-mode-pulse:
+
+``LIRC_MODE_PULSE``
+
+    In pulse mode, a sequence of pulse/space integer values are written to the
+    lirc device using :ref:`lirc-write`.
+
+    The values are alternating pulse and space lengths, in microseconds. The
+    first and last entry must be a pulse, so there must be an odd number
+    of entries.
+
+    This mode is used only for IR send.
+
+********************
+BPF based IR decoder
+********************
+
+The kernel has support for decoding the most common
+:ref:`IR protocols <Remote_controllers_Protocols>`, but there
+are many protocols which are not supported. To support these, it is possible
+to load an BPF program which does the decoding. This can only be done on
+LIRC devices which support reading raw IR.
+
+First, using the `bpf(2)`_ syscall with the ``BPF_LOAD_PROG`` argument,
+program must be loaded of type ``BPF_PROG_TYPE_LIRC_MODE2``. Once attached
+to the LIRC device, this program will be called for each pulse, space or
+timeout event on the LIRC device. The context for the BPF program is a
+pointer to a unsigned int, which is a :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`
+value. When the program has decoded the scancode, it can be submitted using
+the BPF functions ``bpf_rc_keydown()`` or ``bpf_rc_repeat()``. Mouse or pointer
+movements can be reported using ``bpf_rc_pointer_rel()``.
+
+Once you have the file descriptor for the ``BPF_PROG_TYPE_LIRC_MODE2`` BPF
+program, it can be attached to the LIRC device using the `bpf(2)`_ syscall.
+The target must be the file descriptor for the LIRC device, and the
+attach type must be ``BPF_LIRC_MODE2``. No more than 64 BPF programs can be
+attached to a single LIRC device at a time.
+
+.. _bpf(2): http://man7.org/linux/man-pages/man2/bpf.2.html
diff --git a/Documentation/userspace-api/media/rc/lirc-dev.rst b/Documentation/userspace-api/media/rc/lirc-dev.rst
new file mode 100644
index 000000000000..7a395fa52934
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-dev.rst
@@ -0,0 +1,21 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_dev:
+
+LIRC Device Interface
+=====================
+
+
+.. toctree::
+    :maxdepth: 1
+
+    lirc-dev-intro
+    lirc-func
+    lirc-header
diff --git a/Documentation/userspace-api/media/rc/lirc-func.rst b/Documentation/userspace-api/media/rc/lirc-func.rst
new file mode 100644
index 000000000000..e37c99583212
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-func.rst
@@ -0,0 +1,34 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_func:
+
+LIRC Function Reference
+=======================
+
+
+.. toctree::
+    :maxdepth: 1
+
+    lirc-read
+    lirc-write
+    lirc-get-features
+    lirc-get-send-mode
+    lirc-get-rec-mode
+    lirc-get-rec-resolution
+    lirc-set-send-duty-cycle
+    lirc-get-timeout
+    lirc-set-rec-timeout
+    lirc-set-rec-carrier
+    lirc-set-rec-carrier-range
+    lirc-set-send-carrier
+    lirc-set-transmitter-mask
+    lirc-set-rec-timeout-reports
+    lirc-set-measure-carrier-mode
+    lirc-set-wideband-receiver
diff --git a/Documentation/userspace-api/media/rc/lirc-get-features.rst b/Documentation/userspace-api/media/rc/lirc-get-features.rst
new file mode 100644
index 000000000000..f4b9ca09f828
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-features.rst
@@ -0,0 +1,200 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_get_features:
+
+***********************
+ioctl LIRC_GET_FEATURES
+***********************
+
+Name
+====
+
+LIRC_GET_FEATURES - Get the underlying hardware device's features
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_GET_FEATURES, __u32 *features)
+    :name: LIRC_GET_FEATURES
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``features``
+    Bitmask with the LIRC features.
+
+
+Description
+===========
+
+
+Get the underlying hardware device's features. If a driver does not
+announce support of certain features, calling of the corresponding ioctls
+is undefined.
+
+LIRC features
+=============
+
+.. _LIRC-CAN-REC-RAW:
+
+``LIRC_CAN_REC_RAW``
+
+    Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-REC-PULSE:
+
+``LIRC_CAN_REC_PULSE``
+
+    Unused. Kept just to avoid breaking uAPI.
+    :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` can only be used for transmitting.
+
+.. _LIRC-CAN-REC-MODE2:
+
+``LIRC_CAN_REC_MODE2``
+
+    This is raw IR driver for receiving. This means that
+    :ref:`LIRC_MODE_MODE2 <lirc-mode-MODE2>` is used. This also implies
+    that :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>` is also supported,
+    as long as the kernel is recent enough. Use the
+    :ref:`lirc_set_rec_mode` to switch modes.
+
+.. _LIRC-CAN-REC-LIRCCODE:
+
+``LIRC_CAN_REC_LIRCCODE``
+
+    Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-REC-SCANCODE:
+
+``LIRC_CAN_REC_SCANCODE``
+
+    This is a scancode driver for receiving. This means that
+    :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>` is used.
+
+.. _LIRC-CAN-SET-SEND-CARRIER:
+
+``LIRC_CAN_SET_SEND_CARRIER``
+
+    The driver supports changing the modulation frequency via
+    :ref:`ioctl LIRC_SET_SEND_CARRIER <LIRC_SET_SEND_CARRIER>`.
+
+.. _LIRC-CAN-SET-SEND-DUTY-CYCLE:
+
+``LIRC_CAN_SET_SEND_DUTY_CYCLE``
+
+    The driver supports changing the duty cycle using
+    :ref:`ioctl LIRC_SET_SEND_DUTY_CYCLE <LIRC_SET_SEND_DUTY_CYCLE>`.
+
+.. _LIRC-CAN-SET-TRANSMITTER-MASK:
+
+``LIRC_CAN_SET_TRANSMITTER_MASK``
+
+    The driver supports changing the active transmitter(s) using
+    :ref:`ioctl LIRC_SET_TRANSMITTER_MASK <LIRC_SET_TRANSMITTER_MASK>`.
+
+.. _LIRC-CAN-SET-REC-CARRIER:
+
+``LIRC_CAN_SET_REC_CARRIER``
+
+    The driver supports setting the receive carrier frequency using
+    :ref:`ioctl LIRC_SET_REC_CARRIER <LIRC_SET_REC_CARRIER>`.
+
+.. _LIRC-CAN-SET-REC-DUTY-CYCLE-RANGE:
+
+``LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE``
+
+    Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-SET-REC-CARRIER-RANGE:
+
+``LIRC_CAN_SET_REC_CARRIER_RANGE``
+
+    The driver supports
+    :ref:`ioctl LIRC_SET_REC_CARRIER_RANGE <LIRC_SET_REC_CARRIER_RANGE>`.
+
+.. _LIRC-CAN-GET-REC-RESOLUTION:
+
+``LIRC_CAN_GET_REC_RESOLUTION``
+
+    The driver supports
+    :ref:`ioctl LIRC_GET_REC_RESOLUTION <LIRC_GET_REC_RESOLUTION>`.
+
+.. _LIRC-CAN-SET-REC-TIMEOUT:
+
+``LIRC_CAN_SET_REC_TIMEOUT``
+
+    The driver supports
+    :ref:`ioctl LIRC_SET_REC_TIMEOUT <LIRC_SET_REC_TIMEOUT>`.
+
+.. _LIRC-CAN-SET-REC-FILTER:
+
+``LIRC_CAN_SET_REC_FILTER``
+
+    Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-MEASURE-CARRIER:
+
+``LIRC_CAN_MEASURE_CARRIER``
+
+    The driver supports measuring of the modulation frequency using
+    :ref:`ioctl LIRC_SET_MEASURE_CARRIER_MODE <LIRC_SET_MEASURE_CARRIER_MODE>`.
+
+.. _LIRC-CAN-USE-WIDEBAND-RECEIVER:
+
+``LIRC_CAN_USE_WIDEBAND_RECEIVER``
+
+    The driver supports learning mode using
+    :ref:`ioctl LIRC_SET_WIDEBAND_RECEIVER <LIRC_SET_WIDEBAND_RECEIVER>`.
+
+.. _LIRC-CAN-NOTIFY-DECODE:
+
+``LIRC_CAN_NOTIFY_DECODE``
+
+    Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-SEND-RAW:
+
+``LIRC_CAN_SEND_RAW``
+
+    Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-SEND-PULSE:
+
+``LIRC_CAN_SEND_PULSE``
+
+    The driver supports sending (also called as IR blasting or IR TX) using
+    :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>`. This implies that
+    :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>` is also supported for
+    transmit, as long as the kernel is recent enough. Use the
+    :ref:`lirc_set_send_mode` to switch modes.
+
+.. _LIRC-CAN-SEND-MODE2:
+
+``LIRC_CAN_SEND_MODE2``
+
+    Unused. Kept just to avoid breaking uAPI.
+    :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` can only be used for receiving.
+
+.. _LIRC-CAN-SEND-LIRCCODE:
+
+``LIRC_CAN_SEND_LIRCCODE``
+
+    Unused. Kept just to avoid breaking uAPI.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst b/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst
new file mode 100644
index 000000000000..674ce16d5d33
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst
@@ -0,0 +1,74 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_get_rec_mode:
+.. _lirc_set_rec_mode:
+
+**********************************************
+ioctls LIRC_GET_REC_MODE and LIRC_SET_REC_MODE
+**********************************************
+
+Name
+====
+
+LIRC_GET_REC_MODE/LIRC_SET_REC_MODE - Get/set current receive mode.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_GET_REC_MODE, __u32 *mode)
+	:name: LIRC_GET_REC_MODE
+
+.. c:function:: int ioctl( int fd, LIRC_SET_REC_MODE, __u32 *mode)
+	:name: LIRC_SET_REC_MODE
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``mode``
+    Mode used for receive.
+
+Description
+===========
+
+Get and set the current receive mode. Only
+:ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` and
+:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported.
+Use :ref:`lirc_get_features` to find out which modes the driver supports.
+
+Return Value
+============
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``ENODEV``
+
+       -  Device not available.
+
+    -  .. row 2
+
+       -  ``ENOTTY``
+
+       -  Device does not support receiving.
+
+    -  .. row 3
+
+       -  ``EINVAL``
+
+       -  Invalid mode or invalid mode for this device.
diff --git a/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst b/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst
new file mode 100644
index 000000000000..f20b5bf41232
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_get_rec_resolution:
+
+*****************************
+ioctl LIRC_GET_REC_RESOLUTION
+*****************************
+
+Name
+====
+
+LIRC_GET_REC_RESOLUTION - Obtain the value of receive resolution, in microseconds.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_GET_REC_RESOLUTION, __u32 *microseconds)
+    :name: LIRC_GET_REC_RESOLUTION
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``microseconds``
+    Resolution, in microseconds.
+
+
+Description
+===========
+
+Some receivers have maximum resolution which is defined by internal
+sample rate or data format limitations. E.g. it's common that
+signals can only be reported in 50 microsecond steps.
+
+This ioctl returns the integer value with such resolution, with can be
+used by userspace applications like lircd to automatically adjust the
+tolerance value.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst b/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst
new file mode 100644
index 000000000000..973a47bf6068
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst
@@ -0,0 +1,78 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_get_send_mode:
+.. _lirc_set_send_mode:
+
+************************************************
+ioctls LIRC_GET_SEND_MODE and LIRC_SET_SEND_MODE
+************************************************
+
+Name
+====
+
+LIRC_GET_SEND_MODE/LIRC_SET_SEND_MODE - Get/set current transmit mode.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_GET_SEND_MODE, __u32 *mode )
+    :name: LIRC_GET_SEND_MODE
+
+.. c:function:: int ioctl( int fd, LIRC_SET_SEND_MODE, __u32 *mode )
+    :name: LIRC_SET_SEND_MODE
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``mode``
+    The mode used for transmitting.
+
+
+Description
+===========
+
+Get/set current transmit mode.
+
+Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` and
+:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported by for IR send,
+depending on the driver. Use :ref:`lirc_get_features` to find out which
+modes the driver supports.
+
+Return Value
+============
+
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``ENODEV``
+
+       -  Device not available.
+
+    -  .. row 2
+
+       -  ``ENOTTY``
+
+       -  Device does not support transmitting.
+
+    -  .. row 3
+
+       -  ``EINVAL``
+
+       -  Invalid mode or invalid mode for this device.
diff --git a/Documentation/userspace-api/media/rc/lirc-get-timeout.rst b/Documentation/userspace-api/media/rc/lirc-get-timeout.rst
new file mode 100644
index 000000000000..5db84096d7f8
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-timeout.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_get_min_timeout:
+.. _lirc_get_max_timeout:
+
+****************************************************
+ioctls LIRC_GET_MIN_TIMEOUT and LIRC_GET_MAX_TIMEOUT
+****************************************************
+
+Name
+====
+
+LIRC_GET_MIN_TIMEOUT / LIRC_GET_MAX_TIMEOUT - Obtain the possible timeout
+range for IR receive.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_GET_MIN_TIMEOUT, __u32 *timeout)
+    :name: LIRC_GET_MIN_TIMEOUT
+
+.. c:function:: int ioctl( int fd, LIRC_GET_MAX_TIMEOUT, __u32 *timeout)
+    :name: LIRC_GET_MAX_TIMEOUT
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``timeout``
+    Timeout, in microseconds.
+
+
+Description
+===========
+
+Some devices have internal timers that can be used to detect when
+there's no IR activity for a long time. This can help lircd in
+detecting that a IR signal is finished and can speed up the decoding
+process. Returns an integer value with the minimum/maximum timeout
+that can be set.
+
+.. note::
+
+   Some devices have a fixed timeout, in that case
+   both ioctls will return the same value even though the timeout
+   cannot be changed via :ref:`LIRC_SET_REC_TIMEOUT`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-header.rst b/Documentation/userspace-api/media/rc/lirc-header.rst
new file mode 100644
index 000000000000..c7e0716da159
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-header.rst
@@ -0,0 +1,17 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_header:
+
+****************
+LIRC Header File
+****************
+
+.. kernel-include:: $BUILDDIR/lirc.h.rst
+
diff --git a/Documentation/userspace-api/media/rc/lirc-read.rst b/Documentation/userspace-api/media/rc/lirc-read.rst
new file mode 100644
index 000000000000..13f7f5353851
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-read.rst
@@ -0,0 +1,76 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc-read:
+
+***********
+LIRC read()
+***********
+
+Name
+====
+
+lirc-read - Read from a LIRC device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: ssize_t read( int fd, void *buf, size_t count )
+    :name: lirc-read
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by ``open()``.
+
+``buf``
+   Buffer to be filled
+
+``count``
+   Max number of bytes to read
+
+Description
+===========
+
+:ref:`read() <lirc-read>` attempts to read up to ``count`` bytes from file
+descriptor ``fd`` into the buffer starting at ``buf``.  If ``count`` is zero,
+:ref:`read() <lirc-read>` returns zero and has no other results. If ``count``
+is greater than ``SSIZE_MAX``, the result is unspecified.
+
+The exact format of the data depends on what :ref:`lirc_modes` a driver
+uses. Use :ref:`lirc_get_features` to get the supported mode, and use
+:ref:`lirc_set_rec_mode` set the current active mode.
+
+The mode :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` is for raw IR,
+in which packets containing an unsigned int value describing an IR signal are
+read from the chardev.
+
+Alternatively, :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` can be available,
+in this mode scancodes which are either decoded by software decoders, or
+by hardware decoders. The :c:type:`rc_proto` member is set to the
+:ref:`IR protocol <Remote_controllers_Protocols>`
+used for transmission, and ``scancode`` to the decoded scancode,
+and the ``keycode`` set to the keycode or ``KEY_RESERVED``.
+
+
+Return Value
+============
+
+On success, the number of bytes read is returned. It is not an error if
+this number is smaller than the number of bytes requested, or the amount
+of data required for one frame.  On error, -1 is returned, and the ``errno``
+variable is set appropriately.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst b/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst
new file mode 100644
index 000000000000..4cf9472eb904
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst
@@ -0,0 +1,53 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_set_measure_carrier_mode:
+
+***********************************
+ioctl LIRC_SET_MEASURE_CARRIER_MODE
+***********************************
+
+Name
+====
+
+LIRC_SET_MEASURE_CARRIER_MODE - enable or disable measure mode
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_SET_MEASURE_CARRIER_MODE, __u32 *enable )
+    :name: LIRC_SET_MEASURE_CARRIER_MODE
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``enable``
+    enable = 1 means enable measure mode, enable = 0 means disable measure
+    mode.
+
+
+Description
+===========
+
+.. _lirc-mode2-frequency:
+
+Enable or disable measure mode. If enabled, from the next key
+press on, the driver will send ``LIRC_MODE2_FREQUENCY`` packets. By
+default this should be turned off.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst
new file mode 100644
index 000000000000..0439e93aa267
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_set_rec_carrier_range:
+
+********************************
+ioctl LIRC_SET_REC_CARRIER_RANGE
+********************************
+
+Name
+====
+
+LIRC_SET_REC_CARRIER_RANGE - Set lower bound of the carrier used to modulate
+IR receive.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_SET_REC_CARRIER_RANGE, __u32 *frequency )
+    :name: LIRC_SET_REC_CARRIER_RANGE
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``frequency``
+    Frequency of the carrier that modulates PWM data, in Hz.
+
+Description
+===========
+
+This ioctl sets the upper range of carrier frequency that will be recognized
+by the IR receiver.
+
+.. note::
+
+   To set a range use :ref:`LIRC_SET_REC_CARRIER_RANGE
+   <LIRC_SET_REC_CARRIER_RANGE>` with the lower bound first and later call
+   :ref:`LIRC_SET_REC_CARRIER <LIRC_SET_REC_CARRIER>` with the upper bound.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst
new file mode 100644
index 000000000000..f4d18897cb9f
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst
@@ -0,0 +1,53 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_set_rec_carrier:
+
+**************************
+ioctl LIRC_SET_REC_CARRIER
+**************************
+
+Name
+====
+
+LIRC_SET_REC_CARRIER - Set carrier used to modulate IR receive.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_SET_REC_CARRIER, __u32 *frequency )
+    :name: LIRC_SET_REC_CARRIER
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``frequency``
+    Frequency of the carrier that modulates PWM data, in Hz.
+
+Description
+===========
+
+Set receive carrier used to modulate IR PWM pulses and spaces.
+
+.. note::
+
+   If called together with :ref:`LIRC_SET_REC_CARRIER_RANGE`, this ioctl
+   sets the upper bound frequency that will be recognized by the device.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst
new file mode 100644
index 000000000000..ab97f87fa757
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst
@@ -0,0 +1,56 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_set_rec_timeout_reports:
+
+**********************************
+ioctl LIRC_SET_REC_TIMEOUT_REPORTS
+**********************************
+
+Name
+====
+
+LIRC_SET_REC_TIMEOUT_REPORTS - enable or disable timeout reports for IR receive
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_SET_REC_TIMEOUT_REPORTS, __u32 *enable )
+    :name: LIRC_SET_REC_TIMEOUT_REPORTS
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``enable``
+    enable = 1 means enable timeout report, enable = 0 means disable timeout
+    reports.
+
+
+Description
+===========
+
+.. _lirc-mode2-timeout:
+
+Enable or disable timeout reports for IR receive. By default, timeout reports
+should be turned off.
+
+.. note::
+
+   This ioctl is only valid for :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst
new file mode 100644
index 000000000000..227776cf7c62
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst
@@ -0,0 +1,61 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_set_rec_timeout:
+.. _lirc_get_rec_timeout:
+
+***************************************************
+ioctl LIRC_GET_REC_TIMEOUT and LIRC_SET_REC_TIMEOUT
+***************************************************
+
+Name
+====
+
+LIRC_GET_REC_TIMEOUT/LIRC_SET_REC_TIMEOUT - Get/set the integer value for IR inactivity timeout.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_GET_REC_TIMEOUT, __u32 *timeout )
+    :name: LIRC_GET_REC_TIMEOUT
+
+.. c:function:: int ioctl( int fd, LIRC_SET_REC_TIMEOUT, __u32 *timeout )
+    :name: LIRC_SET_REC_TIMEOUT
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``timeout``
+    Timeout, in microseconds.
+
+
+Description
+===========
+
+Get and set the integer value for IR inactivity timeout.
+
+If supported by the hardware, setting it to 0  disables all hardware timeouts
+and data should be reported as soon as possible. If the exact value
+cannot be set, then the next possible value _greater_ than the
+given value should be set.
+
+.. note::
+
+   The range of supported timeout is given by :ref:`LIRC_GET_MIN_TIMEOUT`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst b/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst
new file mode 100644
index 000000000000..7eaf2b993207
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst
@@ -0,0 +1,48 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_set_send_carrier:
+
+***************************
+ioctl LIRC_SET_SEND_CARRIER
+***************************
+
+Name
+====
+
+LIRC_SET_SEND_CARRIER - Set send carrier used to modulate IR TX.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_SET_SEND_CARRIER, __u32 *frequency )
+    :name: LIRC_SET_SEND_CARRIER
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``frequency``
+    Frequency of the carrier to be modulated, in Hz.
+
+Description
+===========
+
+Set send carrier used to modulate IR PWM pulses and spaces.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst b/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst
new file mode 100644
index 000000000000..0dee89364cde
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_set_send_duty_cycle:
+
+******************************
+ioctl LIRC_SET_SEND_DUTY_CYCLE
+******************************
+
+Name
+====
+
+LIRC_SET_SEND_DUTY_CYCLE - Set the duty cycle of the carrier signal for
+IR transmit.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_SET_SEND_DUTY_CYCLE, __u32 *duty_cycle)
+    :name: LIRC_SET_SEND_DUTY_CYCLE
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``duty_cycle``
+    Duty cicle, describing the pulse width in percent (from 1 to 99) of
+    the total cycle. Values 0 and 100 are reserved.
+
+
+Description
+===========
+
+Get/set the duty cycle of the carrier signal for IR transmit.
+
+Currently, no special meaning is defined for 0 or 100, but this
+could be used to switch off carrier generation in the future, so
+these values should be reserved.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst b/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst
new file mode 100644
index 000000000000..dcee4b71dcf6
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst
@@ -0,0 +1,58 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_set_transmitter_mask:
+
+*******************************
+ioctl LIRC_SET_TRANSMITTER_MASK
+*******************************
+
+Name
+====
+
+LIRC_SET_TRANSMITTER_MASK - Enables send codes on a given set of transmitters
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_SET_TRANSMITTER_MASK, __u32 *mask )
+    :name: LIRC_SET_TRANSMITTER_MASK
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``mask``
+    Mask with channels to enable tx. Channel 0 is the least significant bit.
+
+
+Description
+===========
+
+Some IR TX devices have multiple output channels, in such case,
+:ref:`LIRC_CAN_SET_TRANSMITTER_MASK <LIRC-CAN-SET-TRANSMITTER-MASK>` is
+returned via :ref:`LIRC_GET_FEATURES` and this ioctl sets what channels will
+send IR codes.
+
+This ioctl enables the given set of transmitters. The first transmitter is
+encoded by the least significant bit and so on.
+
+When an invalid bit mask is given, i.e. a bit is set, even though the device
+does not have so many transitters, then this ioctl returns the number of
+available transitters and does nothing otherwise.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
new file mode 100644
index 000000000000..22f6fe43b7e7
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc_set_wideband_receiver:
+
+********************************
+ioctl LIRC_SET_WIDEBAND_RECEIVER
+********************************
+
+Name
+====
+
+LIRC_SET_WIDEBAND_RECEIVER - enable wide band receiver.
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, LIRC_SET_WIDEBAND_RECEIVER, __u32 *enable )
+    :name: LIRC_SET_WIDEBAND_RECEIVER
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by open().
+
+``enable``
+    enable = 1 means enable wideband receiver, enable = 0 means disable
+    wideband receiver.
+
+
+Description
+===========
+
+Some receivers are equipped with special wide band receiver which is
+intended to be used to learn output of existing remote. This ioctl
+allows enabling or disabling it.
+
+This might be useful of receivers that have otherwise narrow band receiver
+that prevents them to be used with some remotes. Wide band receiver might
+also be more precise. On the other hand its disadvantage it usually
+reduced range of reception.
+
+.. note::
+
+    Wide band receiver might be implictly enabled if you enable
+    carrier reports. In that case it will be disabled as soon as you disable
+    carrier reports. Trying to disable wide band receiver while carrier
+    reports are active will do nothing.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-write.rst b/Documentation/userspace-api/media/rc/lirc-write.rst
new file mode 100644
index 000000000000..96ca4a22062e
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-write.rst
@@ -0,0 +1,82 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _lirc-write:
+
+************
+LIRC write()
+************
+
+Name
+====
+
+lirc-write - Write to a LIRC device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: ssize_t write( int fd, void *buf, size_t count )
+    :name: lirc-write
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by ``open()``.
+
+``buf``
+    Buffer with data to be written
+
+``count``
+    Number of bytes at the buffer
+
+Description
+===========
+
+:ref:`write() <lirc-write>` writes up to ``count`` bytes to the device
+referenced by the file descriptor ``fd`` from the buffer starting at
+``buf``.
+
+The exact format of the data depends on what mode a driver is in, use
+:ref:`lirc_get_features` to get the supported modes and use
+:ref:`lirc_set_send_mode` set the mode.
+
+When in :ref:`LIRC_MODE_PULSE <lirc-mode-PULSE>` mode, the data written to
+the chardev is a pulse/space sequence of integer values. Pulses and spaces
+are only marked implicitly by their position. The data must start and end
+with a pulse, therefore, the data must always include an uneven number of
+samples. The write function blocks until the data has been transmitted
+by the hardware. If more data is provided than the hardware can send, the
+driver returns ``EINVAL``.
+
+When in :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` mode, one
+``struct lirc_scancode`` must be written to the chardev at a time, else
+``EINVAL`` is returned. Set the desired scancode in the ``scancode`` member,
+and the :ref:`IR protocol <Remote_controllers_Protocols>` in the
+:c:type:`rc_proto`: member. All other members must be
+set to 0, else ``EINVAL`` is returned. If there is no protocol encoder
+for the protocol or the scancode is not valid for the specified protocol,
+``EINVAL`` is returned. The write function blocks until the scancode
+is transmitted by the hardware.
+
+
+Return Value
+============
+
+On success, the number of bytes written is returned. It is not an error if
+this number is smaller than the number of bytes requested, or the amount
+of data required for one frame.  On error, -1 is returned, and the ``errno``
+variable is set appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/rc-intro.rst b/Documentation/userspace-api/media/rc/rc-intro.rst
new file mode 100644
index 000000000000..14e85157bf23
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-intro.rst
@@ -0,0 +1,31 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _Remote_controllers_Intro:
+
+************
+Introduction
+************
+
+Currently, most analog and digital devices have a Infrared input for
+remote controllers. Each manufacturer has their own type of control. It
+is not rare for the same manufacturer to ship different types of
+controls, depending on the device.
+
+A Remote Controller interface is mapped as a normal evdev/input
+interface, just like a keyboard or a mouse. So, it uses all ioctls
+already defined for any other input devices.
+
+However, remove controllers are more flexible than a normal input
+device, as the IR receiver (and/or transmitter) can be used in
+conjunction with a wide variety of different IR remotes.
+
+In order to allow flexibility, the Remote Controller subsystem allows
+controlling the RC-specific attributes via
+:ref:`the sysfs class nodes <remote_controllers_sysfs_nodes>`.
diff --git a/Documentation/userspace-api/media/rc/rc-protos.rst b/Documentation/userspace-api/media/rc/rc-protos.rst
new file mode 100644
index 000000000000..b250ebe301d5
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-protos.rst
@@ -0,0 +1,456 @@
+.. SPDX-License-Identifier: GPL-2.0
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _Remote_controllers_Protocols:
+
+*****************************************
+Remote Controller Protocols and Scancodes
+*****************************************
+
+IR is encoded as a series of pulses and spaces, using a protocol. These
+protocols can encode e.g. an address (which device should respond) and a
+command: what it should do. The values for these are not always consistent
+across different devices for a given protocol.
+
+Therefore out the output of the IR decoder is a scancode; a single u32
+value. Using keymap tables this can be mapped to linux key codes.
+
+Other things can be encoded too. Some IR protocols encode a toggle bit; this
+is to distinguish whether the same button is being held down, or has been
+released and pressed again. If has been released and pressed again, the
+toggle bit will invert from one IR message to the next.
+
+Some remotes have a pointer-type device which can used to control the
+mouse; some air conditioning systems can have their target temperature
+target set in IR.
+
+The following are the protocols the kernel knows about and also lists
+how scancodes are encoded for each protocol.
+
+rc-5 (RC_PROTO_RC5)
+-------------------
+
+This IR protocol uses manchester encoding to encode 14 bits. There is a
+detailed description here https://www.sbprojects.net/knowledge/ir/rc5.php.
+
+The scancode encoding is *not* consistent with the lirc daemon (lircd) rc5
+protocol, or the manchester BPF decoder.
+
+.. flat-table:: rc5 bits scancode mapping
+   :widths:       1 1 2
+
+   * - rc-5 bit
+
+     - scancode bit
+
+     - description
+
+   * - 1
+
+     - none
+
+     - Start bit, always set
+
+   * - 1
+
+     - 6 (inverted)
+
+     - 2nd start bit in rc5,  re-used as 6th command bit
+
+   * - 1
+
+     - none
+
+     - Toggle bit
+
+   * - 5
+
+     - 8 to 13
+
+     - Address
+
+   * - 6
+
+     - 0 to 5
+
+     - Command
+
+There is a variant of rc5 called either rc5x or extended rc5
+where there the second stop bit is the 6th commmand bit, but inverted.
+This is done so it the scancodes and encoding is compatible with existing
+schemes. This bit is stored in bit 6 of the scancode, inverted. This is
+done to keep it compatible with plain rc-5 where there are two start bits.
+
+rc-5-sz (RC_PROTO_RC5_SZ)
+-------------------------
+This is much like rc-5 but one bit longer. The scancode is encoded
+differently.
+
+.. flat-table:: rc-5-sz bits scancode mapping
+   :widths:       1 1 2
+
+   * - rc-5-sz bits
+
+     - scancode bit
+
+     - description
+
+   * - 1
+
+     - none
+
+     - Start bit, always set
+
+   * - 1
+
+     - 13
+
+     - Address bit
+
+   * - 1
+
+     - none
+
+     - Toggle bit
+
+   * - 6
+
+     - 6 to 11
+
+     - Address
+
+   * - 6
+
+     - 0 to 5
+
+     - Command
+
+rc-5x-20 (RC_PROTO_RC5X_20)
+---------------------------
+
+This rc-5 extended to encoded 20 bits. The is a 3555 microseconds space
+after the 8th bit.
+
+.. flat-table:: rc-5x-20 bits scancode mapping
+   :widths:       1 1 2
+
+   * - rc-5-sz bits
+
+     - scancode bit
+
+     - description
+
+   * - 1
+
+     - none
+
+     - Start bit, always set
+
+   * - 1
+
+     - 14
+
+     - Address bit
+
+   * - 1
+
+     - none
+
+     - Toggle bit
+
+   * - 5
+
+     - 16 to 20
+
+     - Address
+
+   * - 6
+
+     - 8 to 13
+
+     - Address
+
+   * - 6
+
+     - 0 to 5
+
+     - Command
+
+
+jvc (RC_PROTO_JVC)
+------------------
+
+The jvc protocol is much like nec, without the inverted values. It is
+described here https://www.sbprojects.net/knowledge/ir/jvc.php.
+
+The scancode is a 16 bits value, where the address is the lower 8 bits
+and the command the higher 8 bits; this is reversed from IR order.
+
+sony-12 (RC_PROTO_SONY12)
+-------------------------
+
+The sony protocol is a pulse-width encoding. There are three variants,
+which just differ in number of bits and scancode encoding.
+
+.. flat-table:: sony-12 bits scancode mapping
+   :widths:       1 1 2
+
+   * - sony-12 bits
+
+     - scancode bit
+
+     - description
+
+   * - 5
+
+     - 16 to 20
+
+     - device
+
+   * - 7
+
+     - 0 to 6
+
+     - function
+
+sony-15 (RC_PROTO_SONY15)
+-------------------------
+
+The sony protocol is a pulse-width encoding. There are three variants,
+which just differ in number of bits and scancode encoding.
+
+.. flat-table:: sony-12 bits scancode mapping
+   :widths:       1 1 2
+
+   * - sony-12 bits
+
+     - scancode bit
+
+     - description
+
+   * - 8
+
+     - 16 to 23
+
+     - device
+
+   * - 7
+
+     - 0 to 6
+
+     - function
+
+sony-20 (RC_PROTO_SONY20)
+-------------------------
+
+The sony protocol is a pulse-width encoding. There are three variants,
+which just differ in number of bits and scancode encoding.
+
+.. flat-table:: sony-20 bits scancode mapping
+   :widths:       1 1 2
+
+   * - sony-20 bits
+
+     - scancode bit
+
+     - description
+
+   * - 5
+
+     - 16 to 20
+
+     - device
+
+   * - 7
+
+     - 0 to 7
+
+     - device
+
+   * - 8
+
+     - 8 to 15
+
+     - extended bits
+
+nec (RC_PROTO_NEC)
+------------------
+
+The nec protocol encodes an 8 bit address and an 8 bit command. It is
+described here https://www.sbprojects.net/knowledge/ir/nec.php. Note
+that the protocol sends least significant bit first.
+
+As a check, the nec protocol sends the address and command twice; the
+second time it is inverted. This is done for verification.
+
+A plain nec IR message has 16 bits; the high 8 bits are the address
+and the low 8 bits are the command.
+
+nec-x (RC_PROTO_NECX)
+---------------------
+
+Extended nec has a 16 bit address and a 8 bit command. This is encoded
+as a 24 bit value as you would expect, with the lower 8 bits the command
+and the upper 16 bits the address.
+
+nec-32 (RC_PROTO_NEC32)
+-----------------------
+
+nec-32 does not send an inverted address or an inverted command; the
+entire message, all 32 bits, are used.
+
+For this to be decoded correctly, the second 8 bits must not be the
+inverted value of the first, and also the last 8 bits must not be the
+inverted value of the third 8 bit value.
+
+The scancode has a somewhat unusual encoding.
+
+.. flat-table:: nec-32 bits scancode mapping
+
+   * - nec-32 bits
+
+     - scancode bit
+
+   * - First 8 bits
+
+     - 16 to 23
+
+   * - Second 8 bits
+
+     - 24 to 31
+
+   * - Third 8 bits
+
+     - 0 to 7
+
+   * - Fourth 8 bits
+
+     - 8 to 15
+
+sanyo (RC_PROTO_SANYO)
+----------------------
+
+The sanyo protocol is like the nec protocol, but with 13 bits address
+rather than 8 bits. Both the address and the command are followed by
+their inverted versions, but these are not present in the scancodes.
+
+Bis 8 to 20 of the scancode is the 13 bits address, and the lower 8
+bits are the command.
+
+mcir2-kbd (RC_PROTO_MCIR2_KBD)
+------------------------------
+
+This protocol is generated by the Microsoft MCE keyboard for keyboard
+events. Refer to the ir-mce_kbd-decoder.c to see how it is encoded.
+
+mcir2-mse (RC_PROTO_MCIR2_MSE)
+------------------------------
+
+This protocol is generated by the Microsoft MCE keyboard for pointer
+events. Refer to the ir-mce_kbd-decoder.c to see how it is encoded.
+
+rc-6-0 (RC_PROTO_RC6_0)
+-----------------------
+
+This is the rc-6 in mode 0. rc-6 is described here
+https://www.sbprojects.net/knowledge/ir/rc6.php.
+The scancode is the exact 16 bits as in the protocol. There is also a
+toggle bit.
+
+rc-6-6a-20 (RC_PROTO_RC6_6A_20)
+-------------------------------
+
+This is the rc-6 in mode 6a, 20 bits. rc-6 is described here
+https://www.sbprojects.net/knowledge/ir/rc6.php.
+The scancode is the exact 20 bits
+as in the protocol. There is also a toggle bit.
+
+rc-6-6a-24 (RC_PROTO_RC6_6A_24)
+-------------------------------
+
+This is the rc-6 in mode 6a, 24 bits. rc-6 is described here
+https://www.sbprojects.net/knowledge/ir/rc6.php.
+The scancode is the exact 24 bits
+as in the protocol. There is also a toggle bit.
+
+rc-6-6a-32 (RC_PROTO_RC6_6A_32)
+-------------------------------
+
+This is the rc-6 in mode 6a, 32 bits. rc-6 is described here
+https://www.sbprojects.net/knowledge/ir/rc6.php.
+The upper 16 bits are the vendor,
+and the lower 16 bits are the vendor-specific bits. This protocol is
+for the non-Microsoft MCE variant (vendor != 0x800f).
+
+
+rc-6-mce (RC_PROTO_RC6_MCE)
+---------------------------
+
+This is the rc-6 in mode 6a, 32 bits. The upper 16 bits are the vendor,
+and the lower 16 bits are the vendor-specific bits. This protocol is
+for the Microsoft MCE variant (vendor = 0x800f). The toggle bit in the
+protocol itself is ignored, and the 16th bit should be takes as the toggle
+bit.
+
+sharp (RC_PROTO_SHARP)
+----------------------
+
+This is a protocol used by Sharp VCRs, is described here
+https://www.sbprojects.net/knowledge/ir/sharp.php. There is a very long
+(40ms) space between the normal and inverted values, and some IR receivers
+cannot decode this.
+
+There is a 5 bit address and a 8 bit command. In the scancode the address is
+in bits 8 to 12, and the command in bits 0 to 7.
+
+xmp (RC_PROTO_XMP)
+------------------
+
+This protocol has several versions and only version 1 is supported. Refer
+to the decoder (ir-xmp-decoder.c) to see how it is encoded.
+
+
+cec (RC_PROTO_CEC)
+------------------
+
+This is not an IR protocol, this is a protocol over CEC. The CEC
+infrastructure uses rc-core for handling CEC commands, so that they
+can easily be remapped.
+
+imon (RC_PROTO_IMON)
+--------------------
+
+This protocol is used by Antec Veris/SoundGraph iMON remotes.
+
+The protocol
+describes both button presses and pointer movements. The protocol encodes
+31 bits, and the scancode is simply the 31 bits with the top bit always 0.
+
+rc-mm-12 (RC_PROTO_RCMM12)
+--------------------------
+
+The rc-mm protocol is described here
+https://www.sbprojects.net/knowledge/ir/rcmm.php. The scancode is simply
+the 12 bits.
+
+rc-mm-24 (RC_PROTO_RCMM24)
+--------------------------
+
+The rc-mm protocol is described here
+https://www.sbprojects.net/knowledge/ir/rcmm.php. The scancode is simply
+the 24 bits.
+
+rc-mm-32 (RC_PROTO_RCMM32)
+--------------------------
+
+The rc-mm protocol is described here
+https://www.sbprojects.net/knowledge/ir/rcmm.php. The scancode is simply
+the 32 bits.
+
+xbox-dvd (RC_PROTO_XBOX_DVD)
+----------------------------
+
+This protocol is used by XBox DVD Remote, which was made for the original
+XBox. There is no in-kernel decoder or encoder for this protocol. The usb
+device decodes the protocol. There is a BPF decoder available in v4l-utils.
diff --git a/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst b/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst
new file mode 100644
index 000000000000..73dd75f77d65
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst
@@ -0,0 +1,151 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _remote_controllers_sysfs_nodes:
+
+*******************************
+Remote Controller's sysfs nodes
+*******************************
+
+As defined at ``Documentation/ABI/testing/sysfs-class-rc``, those are
+the sysfs nodes that control the Remote Controllers:
+
+
+.. _sys_class_rc:
+
+/sys/class/rc/
+==============
+
+The ``/sys/class/rc/`` class sub-directory belongs to the Remote
+Controller core and provides a sysfs interface for configuring infrared
+remote controller receivers.
+
+
+.. _sys_class_rc_rcN:
+
+/sys/class/rc/rcN/
+==================
+
+A ``/sys/class/rc/rcN`` directory is created for each remote control
+receiver device where N is the number of the receiver.
+
+
+.. _sys_class_rc_rcN_protocols:
+
+/sys/class/rc/rcN/protocols
+===========================
+
+Reading this file returns a list of available protocols, something like::
+
+	rc5 [rc6] nec jvc [sony]
+
+Enabled protocols are shown in [] brackets.
+
+Writing "+proto" will add a protocol to the list of enabled protocols.
+
+Writing "-proto" will remove a protocol from the list of enabled
+protocols.
+
+Writing "proto" will enable only "proto".
+
+Writing "none" will disable all protocols.
+
+Write fails with ``EINVAL`` if an invalid protocol combination or unknown
+protocol name is used.
+
+
+.. _sys_class_rc_rcN_filter:
+
+/sys/class/rc/rcN/filter
+========================
+
+Sets the scancode filter expected value.
+
+Use in combination with ``/sys/class/rc/rcN/filter_mask`` to set the
+expected value of the bits set in the filter mask. If the hardware
+supports it then scancodes which do not match the filter will be
+ignored. Otherwise the write will fail with an error.
+
+This value may be reset to 0 if the current protocol is altered.
+
+
+.. _sys_class_rc_rcN_filter_mask:
+
+/sys/class/rc/rcN/filter_mask
+=============================
+
+Sets the scancode filter mask of bits to compare. Use in combination
+with ``/sys/class/rc/rcN/filter`` to set the bits of the scancode which
+should be compared against the expected value. A value of 0 disables the
+filter to allow all valid scancodes to be processed.
+
+If the hardware supports it then scancodes which do not match the filter
+will be ignored. Otherwise the write will fail with an error.
+
+This value may be reset to 0 if the current protocol is altered.
+
+
+.. _sys_class_rc_rcN_wakeup_protocols:
+
+/sys/class/rc/rcN/wakeup_protocols
+==================================
+
+Reading this file returns a list of available protocols to use for the
+wakeup filter, something like::
+
+	rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce
+
+Note that protocol variants are listed, so ``nec``, ``sony``, ``rc-5``, ``rc-6``
+have their different bit length encodings listed if available.
+
+Note that all protocol variants are listed.
+
+The enabled wakeup protocol is shown in [] brackets.
+
+Only one protocol can be selected at a time.
+
+Writing "proto" will use "proto" for wakeup events.
+
+Writing "none" will disable wakeup.
+
+Write fails with ``EINVAL`` if an invalid protocol combination or unknown
+protocol name is used, or if wakeup is not supported by the hardware.
+
+
+.. _sys_class_rc_rcN_wakeup_filter:
+
+/sys/class/rc/rcN/wakeup_filter
+===============================
+
+Sets the scancode wakeup filter expected value. Use in combination with
+``/sys/class/rc/rcN/wakeup_filter_mask`` to set the expected value of
+the bits set in the wakeup filter mask to trigger a system wake event.
+
+If the hardware supports it and wakeup_filter_mask is not 0 then
+scancodes which match the filter will wake the system from e.g. suspend
+to RAM or power off. Otherwise the write will fail with an error.
+
+This value may be reset to 0 if the wakeup protocol is altered.
+
+
+.. _sys_class_rc_rcN_wakeup_filter_mask:
+
+/sys/class/rc/rcN/wakeup_filter_mask
+====================================
+
+Sets the scancode wakeup filter mask of bits to compare. Use in
+combination with ``/sys/class/rc/rcN/wakeup_filter`` to set the bits of
+the scancode which should be compared against the expected value to
+trigger a system wake event.
+
+If the hardware supports it and wakeup_filter_mask is not 0 then
+scancodes which match the filter will wake the system from e.g. suspend
+to RAM or power off. Otherwise the write will fail with an error.
+
+This value may be reset to 0 if the wakeup protocol is altered.
diff --git a/Documentation/userspace-api/media/rc/rc-table-change.rst b/Documentation/userspace-api/media/rc/rc-table-change.rst
new file mode 100644
index 000000000000..f5d00a20b939
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-table-change.rst
@@ -0,0 +1,25 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _Remote_controllers_table_change:
+
+*******************************************
+Changing default Remote Controller mappings
+*******************************************
+
+The event interface provides two ioctls to be used against the
+/dev/input/event device, to allow changing the default keymapping.
+
+This program demonstrates how to replace the keymap tables.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    keytable.c
diff --git a/Documentation/userspace-api/media/rc/rc-tables.rst b/Documentation/userspace-api/media/rc/rc-tables.rst
new file mode 100644
index 000000000000..33b724b17ff3
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-tables.rst
@@ -0,0 +1,766 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _Remote_controllers_tables:
+
+************************
+Remote controller tables
+************************
+
+Unfortunately, for several years, there was no effort to create uniform
+IR keycodes for different devices. This caused the same IR keyname to be
+mapped completely differently on different IR devices. This resulted
+that the same IR keyname to be mapped completely different on different
+IR's. Due to that, V4L2 API now specifies a standard for mapping Media
+keys on IR.
+
+This standard should be used by both V4L/DVB drivers and userspace
+applications
+
+The modules register the remote as keyboard within the linux input
+layer. This means that the IR key strokes will look like normal keyboard
+key strokes (if CONFIG_INPUT_KEYBOARD is enabled). Using the event
+devices (CONFIG_INPUT_EVDEV) it is possible for applications to access
+the remote via /dev/input/event devices.
+
+
+.. _rc_standard_keymap:
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: IR default keymapping
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+
+    -  .. row 1
+
+       -  Key code
+
+       -  Meaning
+
+       -  Key examples on IR
+
+    -  .. row 2
+
+       -  **Numeric keys**
+
+    -  .. row 3
+
+       -  ``KEY_NUMERIC_0``
+
+       -  Keyboard digit 0
+
+       -  0
+
+    -  .. row 4
+
+       -  ``KEY_NUMERIC_1``
+
+       -  Keyboard digit 1
+
+       -  1
+
+    -  .. row 5
+
+       -  ``KEY_NUMERIC_2``
+
+       -  Keyboard digit 2
+
+       -  2
+
+    -  .. row 6
+
+       -  ``KEY_NUMERIC_3``
+
+       -  Keyboard digit 3
+
+       -  3
+
+    -  .. row 7
+
+       -  ``KEY_NUMERIC_4``
+
+       -  Keyboard digit 4
+
+       -  4
+
+    -  .. row 8
+
+       -  ``KEY_NUMERIC_5``
+
+       -  Keyboard digit 5
+
+       -  5
+
+    -  .. row 9
+
+       -  ``KEY_NUMERIC_6``
+
+       -  Keyboard digit 6
+
+       -  6
+
+    -  .. row 10
+
+       -  ``KEY_NUMERIC_7``
+
+       -  Keyboard digit 7
+
+       -  7
+
+    -  .. row 11
+
+       -  ``KEY_NUMERIC_8``
+
+       -  Keyboard digit 8
+
+       -  8
+
+    -  .. row 12
+
+       -  ``KEY_NUMERIC_9``
+
+       -  Keyboard digit 9
+
+       -  9
+
+    -  .. row 13
+
+       -  **Movie play control**
+
+    -  .. row 14
+
+       -  ``KEY_FORWARD``
+
+       -  Instantly advance in time
+
+       -  >> / FORWARD
+
+    -  .. row 15
+
+       -  ``KEY_BACK``
+
+       -  Instantly go back in time
+
+       -  <<< / BACK
+
+    -  .. row 16
+
+       -  ``KEY_FASTFORWARD``
+
+       -  Play movie faster
+
+       -  >>> / FORWARD
+
+    -  .. row 17
+
+       -  ``KEY_REWIND``
+
+       -  Play movie back
+
+       -  REWIND / BACKWARD
+
+    -  .. row 18
+
+       -  ``KEY_NEXT``
+
+       -  Select next chapter / sub-chapter / interval
+
+       -  NEXT / SKIP
+
+    -  .. row 19
+
+       -  ``KEY_PREVIOUS``
+
+       -  Select previous chapter / sub-chapter / interval
+
+       -  << / PREV / PREVIOUS
+
+    -  .. row 20
+
+       -  ``KEY_AGAIN``
+
+       -  Repeat the video or a video interval
+
+       -  REPEAT / LOOP / RECALL
+
+    -  .. row 21
+
+       -  ``KEY_PAUSE``
+
+       -  Pause stream
+
+       -  PAUSE / FREEZE
+
+    -  .. row 22
+
+       -  ``KEY_PLAY``
+
+       -  Play movie at the normal timeshift
+
+       -  NORMAL TIMESHIFT / LIVE / >
+
+    -  .. row 23
+
+       -  ``KEY_PLAYPAUSE``
+
+       -  Alternate between play and pause
+
+       -  PLAY / PAUSE
+
+    -  .. row 24
+
+       -  ``KEY_STOP``
+
+       -  Stop stream
+
+       -  STOP
+
+    -  .. row 25
+
+       -  ``KEY_RECORD``
+
+       -  Start/stop recording stream
+
+       -  CAPTURE / REC / RECORD/PAUSE
+
+    -  .. row 26
+
+       -  ``KEY_CAMERA``
+
+       -  Take a picture of the image
+
+       -  CAMERA ICON / CAPTURE / SNAPSHOT
+
+    -  .. row 27
+
+       -  ``KEY_SHUFFLE``
+
+       -  Enable shuffle mode
+
+       -  SHUFFLE
+
+    -  .. row 28
+
+       -  ``KEY_TIME``
+
+       -  Activate time shift mode
+
+       -  TIME SHIFT
+
+    -  .. row 29
+
+       -  ``KEY_TITLE``
+
+       -  Allow changing the chapter
+
+       -  CHAPTER
+
+    -  .. row 30
+
+       -  ``KEY_SUBTITLE``
+
+       -  Allow changing the subtitle
+
+       -  SUBTITLE
+
+    -  .. row 31
+
+       -  **Image control**
+
+    -  .. row 32
+
+       -  ``KEY_BRIGHTNESSDOWN``
+
+       -  Decrease Brightness
+
+       -  BRIGHTNESS DECREASE
+
+    -  .. row 33
+
+       -  ``KEY_BRIGHTNESSUP``
+
+       -  Increase Brightness
+
+       -  BRIGHTNESS INCREASE
+
+    -  .. row 34
+
+       -  ``KEY_ANGLE``
+
+       -  Switch video camera angle (on videos with more than one angle
+	  stored)
+
+       -  ANGLE / SWAP
+
+    -  .. row 35
+
+       -  ``KEY_EPG``
+
+       -  Open the Elecrowonic Play Guide (EPG)
+
+       -  EPG / GUIDE
+
+    -  .. row 36
+
+       -  ``KEY_TEXT``
+
+       -  Activate/change closed caption mode
+
+       -  CLOSED CAPTION/TELETEXT / DVD TEXT / TELETEXT / TTX
+
+    -  .. row 37
+
+       -  **Audio control**
+
+    -  .. row 38
+
+       -  ``KEY_AUDIO``
+
+       -  Change audio source
+
+       -  AUDIO SOURCE / AUDIO / MUSIC
+
+    -  .. row 39
+
+       -  ``KEY_MUTE``
+
+       -  Mute/unmute audio
+
+       -  MUTE / DEMUTE / UNMUTE
+
+    -  .. row 40
+
+       -  ``KEY_VOLUMEDOWN``
+
+       -  Decrease volume
+
+       -  VOLUME- / VOLUME DOWN
+
+    -  .. row 41
+
+       -  ``KEY_VOLUMEUP``
+
+       -  Increase volume
+
+       -  VOLUME+ / VOLUME UP
+
+    -  .. row 42
+
+       -  ``KEY_MODE``
+
+       -  Change sound mode
+
+       -  MONO/STEREO
+
+    -  .. row 43
+
+       -  ``KEY_LANGUAGE``
+
+       -  Select Language
+
+       -  1ST / 2ND LANGUAGE / DVD LANG / MTS/SAP / MTS SEL
+
+    -  .. row 44
+
+       -  **Channel control**
+
+    -  .. row 45
+
+       -  ``KEY_CHANNEL``
+
+       -  Go to the next favorite channel
+
+       -  ALT / CHANNEL / CH SURFING / SURF / FAV
+
+    -  .. row 46
+
+       -  ``KEY_CHANNELDOWN``
+
+       -  Decrease channel sequentially
+
+       -  CHANNEL - / CHANNEL DOWN / DOWN
+
+    -  .. row 47
+
+       -  ``KEY_CHANNELUP``
+
+       -  Increase channel sequentially
+
+       -  CHANNEL + / CHANNEL UP / UP
+
+    -  .. row 48
+
+       -  ``KEY_DIGITS``
+
+       -  Use more than one digit for channel
+
+       -  PLUS / 100/ 1xx / xxx / -/-- / Single Double Triple Digit
+
+    -  .. row 49
+
+       -  ``KEY_SEARCH``
+
+       -  Start channel autoscan
+
+       -  SCAN / AUTOSCAN
+
+    -  .. row 50
+
+       -  **Colored keys**
+
+    -  .. row 51
+
+       -  ``KEY_BLUE``
+
+       -  IR Blue key
+
+       -  BLUE
+
+    -  .. row 52
+
+       -  ``KEY_GREEN``
+
+       -  IR Green Key
+
+       -  GREEN
+
+    -  .. row 53
+
+       -  ``KEY_RED``
+
+       -  IR Red key
+
+       -  RED
+
+    -  .. row 54
+
+       -  ``KEY_YELLOW``
+
+       -  IR Yellow key
+
+       -  YELLOW
+
+    -  .. row 55
+
+       -  **Media selection**
+
+    -  .. row 56
+
+       -  ``KEY_CD``
+
+       -  Change input source to Compact Disc
+
+       -  CD
+
+    -  .. row 57
+
+       -  ``KEY_DVD``
+
+       -  Change input to DVD
+
+       -  DVD / DVD MENU
+
+    -  .. row 58
+
+       -  ``KEY_EJECTCLOSECD``
+
+       -  Open/close the CD/DVD player
+
+       -  -> ) / CLOSE / OPEN
+
+    -  .. row 59
+
+       -  ``KEY_MEDIA``
+
+       -  Turn on/off Media application
+
+       -  PC/TV / TURN ON/OFF APP
+
+    -  .. row 60
+
+       -  ``KEY_PC``
+
+       -  Selects from TV to PC
+
+       -  PC
+
+    -  .. row 61
+
+       -  ``KEY_RADIO``
+
+       -  Put into AM/FM radio mode
+
+       -  RADIO / TV/FM / TV/RADIO / FM / FM/RADIO
+
+    -  .. row 62
+
+       -  ``KEY_TV``
+
+       -  Select tv mode
+
+       -  TV / LIVE TV
+
+    -  .. row 63
+
+       -  ``KEY_TV2``
+
+       -  Select Cable mode
+
+       -  AIR/CBL
+
+    -  .. row 64
+
+       -  ``KEY_VCR``
+
+       -  Select VCR mode
+
+       -  VCR MODE / DTR
+
+    -  .. row 65
+
+       -  ``KEY_VIDEO``
+
+       -  Alternate between input modes
+
+       -  SOURCE / SELECT / DISPLAY / SWITCH INPUTS / VIDEO
+
+    -  .. row 66
+
+       -  **Power control**
+
+    -  .. row 67
+
+       -  ``KEY_POWER``
+
+       -  Turn on/off computer
+
+       -  SYSTEM POWER / COMPUTER POWER
+
+    -  .. row 68
+
+       -  ``KEY_POWER2``
+
+       -  Turn on/off application
+
+       -  TV ON/OFF / POWER
+
+    -  .. row 69
+
+       -  ``KEY_SLEEP``
+
+       -  Activate sleep timer
+
+       -  SLEEP / SLEEP TIMER
+
+    -  .. row 70
+
+       -  ``KEY_SUSPEND``
+
+       -  Put computer into suspend mode
+
+       -  STANDBY / SUSPEND
+
+    -  .. row 71
+
+       -  **Window control**
+
+    -  .. row 72
+
+       -  ``KEY_CLEAR``
+
+       -  Stop stream and return to default input video/audio
+
+       -  CLEAR / RESET / BOSS KEY
+
+    -  .. row 73
+
+       -  ``KEY_CYCLEWINDOWS``
+
+       -  Minimize windows and move to the next one
+
+       -  ALT-TAB / MINIMIZE / DESKTOP
+
+    -  .. row 74
+
+       -  ``KEY_FAVORITES``
+
+       -  Open the favorites stream window
+
+       -  TV WALL / Favorites
+
+    -  .. row 75
+
+       -  ``KEY_MENU``
+
+       -  Call application menu
+
+       -  2ND CONTROLS (USA: MENU) / DVD/MENU / SHOW/HIDE CTRL
+
+    -  .. row 76
+
+       -  ``KEY_NEW``
+
+       -  Open/Close Picture in Picture
+
+       -  PIP
+
+    -  .. row 77
+
+       -  ``KEY_OK``
+
+       -  Send a confirmation code to application
+
+       -  OK / ENTER / RETURN
+
+    -  .. row 78
+
+       -  ``KEY_ASPECT_RATIO``
+
+       -  Select screen aspect ratio
+
+       -  4:3 16:9 SELECT
+
+    -  .. row 79
+
+       -  ``KEY_FULL_SCREEN``
+
+       -  Put device into zoom/full screen mode
+
+       -  ZOOM / FULL SCREEN / ZOOM+ / HIDE PANNEL / SWITCH
+
+    -  .. row 80
+
+       -  **Navigation keys**
+
+    -  .. row 81
+
+       -  ``KEY_ESC``
+
+       -  Cancel current operation
+
+       -  CANCEL / BACK
+
+    -  .. row 82
+
+       -  ``KEY_HELP``
+
+       -  Open a Help window
+
+       -  HELP
+
+    -  .. row 83
+
+       -  ``KEY_HOMEPAGE``
+
+       -  Navigate to Homepage
+
+       -  HOME
+
+    -  .. row 84
+
+       -  ``KEY_INFO``
+
+       -  Open On Screen Display
+
+       -  DISPLAY INFORMATION / OSD
+
+    -  .. row 85
+
+       -  ``KEY_WWW``
+
+       -  Open the default browser
+
+       -  WEB
+
+    -  .. row 86
+
+       -  ``KEY_UP``
+
+       -  Up key
+
+       -  UP
+
+    -  .. row 87
+
+       -  ``KEY_DOWN``
+
+       -  Down key
+
+       -  DOWN
+
+    -  .. row 88
+
+       -  ``KEY_LEFT``
+
+       -  Left key
+
+       -  LEFT
+
+    -  .. row 89
+
+       -  ``KEY_RIGHT``
+
+       -  Right key
+
+       -  RIGHT
+
+    -  .. row 90
+
+       -  **Miscellaneous keys**
+
+    -  .. row 91
+
+       -  ``KEY_DOT``
+
+       -  Return a dot
+
+       -  .
+
+    -  .. row 92
+
+       -  ``KEY_FN``
+
+       -  Select a function
+
+       -  FUNCTION
+
+
+It should be noted that, sometimes, there some fundamental missing keys
+at some cheaper IR's. Due to that, it is recommended to:
+
+
+.. _rc_keymap_notes:
+
+.. flat-table:: Notes
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  On simpler IR's, without separate channel keys, you need to map UP
+	  as ``KEY_CHANNELUP``
+
+    -  .. row 2
+
+       -  On simpler IR's, without separate channel keys, you need to map
+	  DOWN as ``KEY_CHANNELDOWN``
+
+    -  .. row 3
+
+       -  On simpler IR's, without separate volume keys, you need to map
+	  LEFT as ``KEY_VOLUMEDOWN``
+
+    -  .. row 4
+
+       -  On simpler IR's, without separate volume keys, you need to map
+	  RIGHT as ``KEY_VOLUMEUP``
diff --git a/Documentation/userspace-api/media/rc/remote_controllers.rst b/Documentation/userspace-api/media/rc/remote_controllers.rst
new file mode 100644
index 000000000000..3ab2d6db1564
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/remote_controllers.rst
@@ -0,0 +1,59 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. include:: <isonum.txt>
+
+.. _remote_controllers:
+
+################################
+Part III - Remote Controller API
+################################
+
+.. only:: html
+
+   .. class:: toc-title
+
+        Table of Contents
+
+.. toctree::
+    :maxdepth: 5
+    :numbered:
+
+    rc-intro
+    rc-sysfs-nodes
+    rc-protos
+    rc-tables
+    rc-table-change
+    lirc-dev
+
+
+**********************
+Revision and Copyright
+**********************
+
+Authors:
+
+- Carvalho Chehab, Mauro <mchehab@kernel.org>
+
+ - Initial version.
+
+**Copyright** |copy| 2009-2016 : Mauro Carvalho Chehab
+
+****************
+Revision History
+****************
+
+:revision: 3.15 / 2014-02-06 (*mcc*)
+
+Added the interface description and the RC sysfs class description.
+
+
+:revision: 1.0 / 2009-09-06 (*mcc*)
+
+Initial revision
diff --git a/Documentation/userspace-api/media/typical_media_device.svg b/Documentation/userspace-api/media/typical_media_device.svg
new file mode 100644
index 000000000000..3420341ff7b6
--- /dev/null
+++ b/Documentation/userspace-api/media/typical_media_device.svg
@@ -0,0 +1,116 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg id="svg2" width="235mm" height="179mm" clip-path="url(#a)" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 22648.239 17899.829" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata1533"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4"><clipPath id="a"><rect id="rect7" width="28000" height="21000"/></clipPath></defs><path id="path11" d="m10146 2636c-518.06 0-1035.1 515-1035.1 1031v4124c0 516 517.06 1032 1035.1 1032h8572.2c518.06 0 1036.1-516 1036.1-1032v-4124c0-516-518.06-1031-1036.1-1031h-8572.2z"
+fill="#fcf" style=""/><path id="path15" d="m1505.5 13443c-293 0-585 292-585 585v2340c0 293 292 586 585 586h3275c293 0 586-293 586-586v-2340c0-293-293-585-586-585h-3275z" fill="#ffc" style=""/><path id="path19" d="m517.15 22.013c-461 0-922 461-922 922v11169c0 461 461 923 922 923h3692c461 0 922-462 922-923v-11169c0-461-461-922-922-922h-3692z" fill="#e6e6e6" style=""/><path id="path23" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="#ff8080" style=""/><path id="path25" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="none" stroke="#3465af" style=""/><text id="text27" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan29" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan31" class="TextPosition" x="489.5459" y="6111.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan33"
+fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio decoder</tspan></tspan></tspan></text>
+<path id="path37" d="m2371.5 9608h-2260v-1270h4520v1270h-2260z" fill="#ff8080" style=""/><path id="path39" d="m2371.5 9608h-2260v-1270h4520v1270h-2260z" fill="none" stroke="#3465af" style=""/><text id="text41" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan43" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan45" class="TextPosition" x="527.5459" y="9189.0127" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan47" fill="#000000" font-family="Serif, serif" font-size="493.88px">Video decoder</tspan></tspan></tspan></text>
+<path id="path51" d="m2363.5 8053h-2269v-1224h4537v1224h-2268z" fill="#ff8080" style=""/><path id="path53" d="m2363.5 8053h-2269v-1224h4537v1224h-2268z" fill="none" stroke="#3465af" style=""/><text id="text55" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan57" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan59" class="TextPosition" x="481.5459" y="7657.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan61" fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio encoder</tspan></tspan></tspan></text>
+<path id="path65" d="m13622 10386h-3810v-1281h7620v1281h-3810z" fill="#cfc" style=""/><path id="path67" d="m13622 10386h-3810v-1281h7620v1281h-3810z" fill="none" stroke="#3465af" style=""/><text id="text69" class="TextShape" x="-2089.4541" y="-2446.187" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan71" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan73" class="TextPosition" x="10287.546" y="9960.8135" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan75" fill="#000000" font-family="Serif, serif" font-size="493.88px">Button Key/IR input logic</tspan></tspan></tspan></text>
+<path id="path79" d="m12080 12182h-2268v-1412h4536v1412h-2268z" fill="#cfe7f5" style=""/><path id="path81" d="m12080 12182h-2268v-1412h4536v1412h-2268z" fill="none" stroke="#3465af" style=""/><text id="text83" class="TextShape" x="-2089.4541" y="-2389.7871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan85" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan87" class="TextPosition" x="10792.546" y="11692.213" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan89" fill="#000000" font-family="Serif, serif" font-size="493.88px">EEPROM</tspan></tspan></tspan></text>
+<path id="path93" d="m3050.5 15498h-1563v-1715h3126v1715h-1563z" fill="#fc9" style=""/><path id="path95" d="m3050.5 15498h-1563v-1715h3126v1715h-1563z" fill="none" stroke="#3465af" style=""/><text id="text97" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan99" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan101" class="TextPosition" x="2186.5459" y="14856.013" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan103" fill="#000000" font-family="Serif, serif" font-size="493.88px">Sensor</tspan></tspan></tspan></text>
+<path id="path107" d="m4629.5 5866 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="#729fcf" style=""/><path id="path109" d="m4629.5 5866 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path113" d="m4629.5 7448 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="#729fcf" style=""/><path id="path115" d="m4629.5 7448 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path119" d="m4631.5 8936 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path121" d="m4631.5 8936 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path125" d="m7872.5 11464 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z"
+fill="#729fcf" style=""/><path id="path127" d="m7872.5 11464 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path131" d="m7872.5 9716.8 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path133" d="m7872.5 9716.8 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path137" d="m7872.5 14994 670-353v176h2028v-176l671 353-671 354v-177h-2028v177l-670-354z" fill="#729fcf" style=""/><path id="path139" d="m7872.5 14994 670-353v176h2028v-176l671 353-671 354v-177h-2028v177l-670-354z" fill="none" stroke="#3465af" style=""/><path id="path143" d="m17534 14105 978.49 840.89-978.49 840.89v-420.86h-2960.5v420.86l-979.49-840.89 979.49-840.89v420.03h2960.5v-420.03z" fill="#729fcf" style=""/><path id="path145" d="m17534 14105 978.49
+840.89-978.49 840.89v-420.86h-2960.5v420.86l-979.49-840.89 979.49-840.89v420.03h2960.5v-420.03z" fill="none" stroke="#3465af" stroke-width="25.77" style=""/><text id="text149" class="TextShape" x="-9922.1533" y="-644.58704" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan151" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan153" class="TextPosition" transform="matrix(0,-1,1,0,8509,40173)" x="14418.847" y="15187.413" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan155" fill="#000000" font-family="Serif, serif" font-size="493.88px">System Bus</tspan></tspan></tspan></text>
+<path id="path159" d="m11062 7098h-1250v-875h2499v875h-1249z" fill="#cff" style=""/><path id="path161" d="m11062 7098h-1250v-875h2499v875h-1249z" fill="none" stroke="#3465af" style=""/><text id="text163" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan165" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan167" class="TextPosition" x="10125.546" y="6876.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan169" fill="#000000" font-family="Serif, serif" font-size="493.88px">Demux</tspan></tspan></tspan></text>
+<path id="path173" d="m7906.5 6601 373-357v178h1130v-178l374 357-374 358v-179h-1130v179l-373-358z" fill="#729fcf" style=""/><path id="path175" d="m7906.5 6601 373-357v178h1130v-178l374 357-374 358v-179h-1130v179l-373-358z" fill="none" stroke="#3465af" style=""/><path id="path179" d="m7906.5 5214 373-358v179h1130v-179l374 358-374 358v-179h-1130v179l-373-358z" fill="#729fcf" style=""/><path id="path181" d="m7906.5 5214 373-358v179h1130v-179l374 358-374 358v-179h-1130v179l-373-358z" fill="none" stroke="#3465af" style=""/><path id="path185" d="m14233 5828h-4421v-1270h8841v1270h-4420z" fill="#cff" style=""/><path id="path187" d="m14233 5828h-4421v-1270h8841v1270h-4420z" fill="none" stroke="#3465af" style=""/><text id="text189" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan191" class="TextParagraph" font-family="Serif, serif"
+font-size="493.88px"><tspan id="tspan193" class="TextPosition" x="10696.546" y="5409.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan195" fill="#000000" font-family="Serif, serif" font-size="493.88px">Conditional Access Module</tspan></tspan></tspan></text>
+<path id="path199" d="m2355.5 11123h-2269v-1224h4537v1224h-2268z" fill="#ff8080" style=""/><path id="path201" d="m2355.5 11123h-2269v-1224h4537v1224h-2268z" fill="none" stroke="#3465af" style=""/><text id="text203" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan205" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan207" class="TextPosition" x="511.5459" y="10727.013" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan209" fill="#000000" font-family="Serif, serif" font-size="493.88px">Video encoder</tspan></tspan></tspan></text>
+<path id="path213" d="m4631.5 10470 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path215" d="m4631.5 10470 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path219" d="m18702 5381 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path221" d="m18702 5381 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><text id="text225" class="TextShape" x="-1976.5541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan227" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan229" class="TextPosition" x="13.4459" y="12314.013" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan231" fill="#000000"
+font-family="Serif, serif" font-size="493.88px">Radio / Analog TV</tspan></tspan></tspan></text>
+<text id="text235" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan237" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan239" class="TextPosition" x="12866.546" y="8560.0127" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan241" fill="#000000" font-family="Serif, serif" font-size="493.88px">Digital TV</tspan></tspan></tspan></text>
+<text id="text245" class="TextShape" x="-8919.0537" y="-1373.787" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan247" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan249" class="TextPosition" x="5804.9458" y="17793.213" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan251" fill="#000000" font-family="Serif, serif" font-size="493.88px">PS.: picture is not complete: other blocks may be present</tspan></tspan></tspan></text>
+<text id="text255" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan257" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan259" class="TextPosition" x="2109.5459" y="16397.014" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan261" fill="#000000" font-family="Serif, serif" font-size="493.88px">Webcam</tspan></tspan></tspan></text>
+<path id="path265" d="m12463 13926h-2650v-1412h5299v1412h-2649z" fill="#f90" style=""/><path id="path267" d="m12463 13926h-2650v-1412h5299v1412h-2649z" fill="none" stroke="#3465af" style=""/><text id="text269" class="TextShape" x="-2089.4541" y="-2446.187" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan271" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan273" class="TextPosition" x="10175.546" y="13435.813" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan275" fill="#000000" font-family="Serif, serif" font-size="493.88px">Processing blocks</tspan></tspan></tspan></text>
+<path id="path279" d="m7872.5 13208 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path281" d="m7872.5 13208 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path285" d="m4612.5 14790 397-353v176h1201v-176l398 353-398 354v-177h-1201v177l-397-354z" fill="#729fcf" style=""/><path id="path287" d="m4612.5 14790 397-353v176h1201v-176l398 353-398 354v-177h-1201v177l-397-354z" fill="none" stroke="#3465af" style=""/><text id="text291" class="TextShape" x="-2428.0542" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan293" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan295" class="TextPosition" x="20421.945" y="6628.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan297" fill="#000000"
+font-family="Serif, serif" font-size="493.88px">Smartcard</tspan></tspan></tspan></text>
+<path id="path301" d="m623.32 436.01c-334.6 0-669.2 333-669.2 666v2668c0 333 334.6 666 669.2 666h18456c334.6 0 670.2-333 670.2-666v-2668c0-333-335.6-666-670.2-666h-18456z" fill="#fcf" style=""/><path id="path305" d="m3031.5 2991h-1614v-1816h3227v1816h-1613z" fill="#ff8080" style=""/><path id="path307" d="m3031.5 2991h-1614v-1816h3227v1816h-1613z" fill="none" stroke="#3465af" style=""/><text id="text309" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan311" class="TextParagraph"><tspan id="tspan313" class="TextPosition" x="2284.5459" y="1947.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan315" fill="#000000" font-family="Serif, serif" font-size="493.88px">Tuner</tspan></tspan></tspan><tspan id="tspan317" class="TextParagraph"><tspan id="tspan319" class="TextPosition" x="2061.5459" y="2650.0129"
+font-family="Serif, serif" font-size="493.88px"><tspan id="tspan321" fill="#000000" font-family="Serif, serif" font-size="493.88px">FM/TV</tspan></tspan></tspan></text>
+<path id="path325" d="m812.55 1538c0 111 40 202 88 202h530c48 0 89-91 89-202 0-110-41-202-89-202h-530c-48 0-88 92-88 202z" fill="#ff8080" style=""/><path id="path327" d="m812.55 1538c0 111 40 202 88 202h530c48 0 89-91 89-202 0-110-41-202-89-202h-530c-48 0-88 92-88 202z" fill="none" stroke="#3465af" style=""/><path id="path329" d="m812.55 1538c0 111 40 202 88 202s88-91 88-202c0-110-40-202-88-202s-88 92-88 202z" fill="#ffb3b3" style=""/><path id="path331" d="m812.55 1538c0 111 40 202 88 202s88-91 88-202c0-110-40-202-88-202s-88 92-88 202z" fill="none" stroke="#3465af" style=""/><path id="path335" d="m813.55 2103c0 110 40 202 88 202h530c48 0 89-92 89-202s-41-203-89-203h-530c-48 0-88 93-88 203z" fill="#ff8080" style=""/><path id="path337" d="m813.55 2103c0 110 40 202 88 202h530c48 0 89-92 89-202s-41-203-89-203h-530c-48 0-88 93-88 203z" fill="none" stroke="#3465af" style=""/><path
+id="path339" d="m813.55 2103c0 110 40 202 88 202s88-92 88-202-40-203-88-203-88 93-88 203z" fill="#ffb3b3" style=""/><path id="path341" d="m813.55 2103c0 110 40 202 88 202s88-92 88-202-40-203-88-203-88 93-88 203z" fill="none" stroke="#3465af" style=""/><path id="path345" d="m4629.5 2032 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="#729fcf" style=""/><path id="path347" d="m4629.5 2032 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path351" d="m7889.5 1986 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="#729fcf" style=""/><path id="path353" d="m7889.5 1986 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="none" stroke="#3465af" style=""/><path id="path357" d="m14411 4025h-4500v-1389h9e3v1389h-4500z" fill="#cff" style=""/><path id="path359" d="m14411
+4025h-4500v-1389h9e3v1389h-4500z" fill="none" stroke="#3465af" style=""/><text id="text361" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan363" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan365" class="TextPosition" x="9961.5459" y="3546.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan367" fill="#000000" font-family="Serif, serif" font-size="493.88px">Satellite Equipment Control (SEC)</tspan></tspan></tspan></text>
+<path id="path371" d="m11311 2436h-1400v-1e3h2800v1e3h-1400z" fill="#cff" style=""/><path id="path373" d="m11311 2436h-1400v-1e3h2800v1e3h-1400z" fill="none" stroke="#3465af" style=""/><text id="text375" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan377" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan379" class="TextPosition" x="10375.546" y="2152.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan381" fill="#000000" font-family="Serif, serif" font-size="493.88px">Demod</tspan></tspan></tspan></text>
+<path id="path385" d="m7889.5 3287 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="#729fcf" style=""/><path id="path387" d="m7889.5 3287 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="none" stroke="#3465af" style=""/><path id="path389" d="m7906.5 9121v7302h-1270v-14605h1270v7303z" fill="#ff9" style=""/><path id="path391" d="m7906.5 9121v7302h-1270v-14605h1270v7303z" fill="none" stroke="#3465af" style=""/><text id="text393" class="TextShape" transform="rotate(-90)" x="-20792.584" y="-6589.021" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan395" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan397" class="TextPosition" transform="matrix(0,-1,1,0,-4473,23627)" x="-11215.646" y="7460.9849" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan399" fill="#000000" font-family="Serif,
+serif" font-size="493.88px">I2C Bus (control bus)</tspan></tspan></tspan></text>
+<text id="text403" class="TextShape" x="-2145.854" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan405" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan407" class="TextPosition" x="7245.146" y="1114.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan409" fill="#000000" font-family="Serif, serif" font-size="493.88px">Digital TV Frontend</tspan></tspan></tspan></text>
+<path id="path415" d="m863.15 636.14c-18.27 0-35.525 0.99994-53.795 2.9998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path417" d="m776.87 644.14c-17.255 2.9998-35.525 6.9996-52.78 11.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path419" d="m692.63 666.14c-16.24 5.9996-33.495 11.999-49.735 19.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path421" d="m613.46 700.14c-15.225 7.9995-31.465 16.999-46.69 26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path423" d="m539.36 745.14c-14.21 9.9994-28.42 20.999-42.63 31.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path425" d="m471.36 798.14c-13.195 11.999-26.39 23.999-38.57 36.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path427" d="m410.46 859.13c-11.165 12.999-22.33
+26.998-33.495 40.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path429" d="m357.68 927.13c-10.15 13.999-19.285 28.998-28.42 44.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path431" d="m314.03 1000.1c-8.12 15.999-15.225 31.998-22.33 48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path433" d="m280.54 1079.1c-5.075 16.999-10.15 33.998-14.21 50.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path435" d="m260.24 1162.1c-3.045 17.999-5.075 34.998-6.09 52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path437" d="m254.15 1247.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path439" d="m254.15 1333.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path441" d="m254.15 1418.1v52.997"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path443" d="m254.15 1504.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path445" d="m254.15 1589.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path447" d="m254.15 1675.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path449" d="m254.15 1760.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path451" d="m254.15 1845.1v53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path453" d="m254.15 1931.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path455" d="m254.15 2016.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path457" d="m254.15 2102.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path459" d="m254.15 2187.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path461" d="m254.15 2273v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path463" d="m254.15 2358v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path465" d="m254.15 2443v53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path467" d="m254.15 2529v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path469" d="m254.15 2614v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path471" d="m254.15 2700v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path473" d="m254.15 2785v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path475" d="m254.15 2871v52.997" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path477" d="m254.15 2956v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path479" d="m254.15 3041v53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path481" d="m254.15 3127v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path483" d="m254.15 3212v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path485" d="m254.15 3298v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path487" d="m254.15 3383v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path489" d="m254.15 3469v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path491" d="m254.15 3554v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path493"
+d="m254.15 3639c0 17.999 1.015 35.998 3.045 52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path495" d="m262.27 3724c4.06 17.999 8.12 34.998 13.195 51.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path497" d="m285.61 3807c6.09 15.999 13.195 32.998 20.3 48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path499" d="m321.14 3885c8.12 14.999 17.255 30.998 27.405 45.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path501" d="m366.81 3957.9c10.15 13.999 21.315 27.998 32.48 41.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path503" d="m420.61 4023.9c12.18 12.999 25.375 25.998 38.57 37.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path505" d="m483.54 4083.9c13.195 10.999 27.405 22.999 41.615 32.998" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path507" d="m552.56 4135.9c14.21 9.9994 29.435 18.999 45.675 26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path509" d="m627.67 4178.9c15.225 6.9996 32.48 14.999 48.72 20.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path511" d="m707.85 4210.9c17.255 4.9997 34.51 9.9994 51.765 13.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path513" d="m792.1 4230.9c17.255 1.9999 35.525 3.9998 53.795 4.9997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path515" d="m878.37 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path517" d="m964.65 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path519" d="m1051.9 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path521" d="m1138.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path523" d="m1225.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path525" d="m1311.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path527" d="m1398.1 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path529" d="m1485.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path531" d="m1571.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path533" d="m1658.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path535" d="m1745.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path537"
+d="m1832.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path539" d="m1918.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path541" d="m2005 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path543" d="m2092.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path545" d="m2178.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path547" d="m2265.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path549" d="m2352.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path551" d="m2439.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path553" d="m2525.7 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path555" d="m2612 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path557" d="m2699.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path559" d="m2785.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path561" d="m2872.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path563" d="m2959.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path565" d="m3046.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path567" d="m3132.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path569" d="m3220 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path571"
+d="m3306.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path573" d="m3392.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path575" d="m3479.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path577" d="m3566.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path579" d="m3653.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path581" d="m3739.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path583" d="m3826.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path585" d="m3913.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path587" d="m3999.5 4235.9h53.795" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path589" d="m4086.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path591" d="m4173.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path593" d="m4260.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path595" d="m4346.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path597" d="m4433.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path599" d="m4520.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path601" d="m4606.5 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path603" d="m4693.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path605" d="m4780 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path607" d="m4867.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path609" d="m4953.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path611" d="m5040.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path613" d="m5127.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path615" d="m5213.4 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path617" d="m5300.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path619" d="m5387 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path621" d="m5474.3 4235.9h53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path623" d="m5560.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path625" d="m5647.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path627" d="m5734.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path629" d="m5820.4 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path631" d="m5907.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path633" d="m5994 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path635" d="m6081.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path637" d="m6167.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path639" d="m6254.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path641" d="m6341.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path643" d="m6427.4 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path645" d="m6514.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path647" d="m6600.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path649" d="m6688.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path651" d="m6774.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path653" d="m6861.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path655" d="m6948.1
+4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path657" d="m7035.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path659" d="m7121.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path661" d="m7207.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path663" d="m7295.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path665" d="m7381.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path667" d="m7468.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path669" d="m7555 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path671" d="m7642.3 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path673" d="m7728.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path675" d="m7814.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path677" d="m7902.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path679" d="m7988.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path681" d="m8075.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path683" d="m8162 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path685" d="m8249.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path687" d="m8335.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path689"
+d="m8421.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path691" d="m8509.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path693" d="m8595.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path695" d="m8682.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path697" d="m8769 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path699" d="m8856.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path701" d="m8942.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path703" d="m9028.8 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path705" d="m9116.1 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path707" d="m9202.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path709" d="m9289.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path711" d="m9376 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path713" d="m9463.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path715" d="m9549.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path717" d="m9635.8 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path719" d="m9723.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path721" d="m9809.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path723"
+d="m9896.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path725" d="m9982.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path727" d="m10070 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path729" d="m10156 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path731" d="m10243 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path733" d="m10330 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path735" d="m10416 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path737" d="m10504 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path739" d="m10590 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path741" d="m10677 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path743" d="m10763 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path745" d="m10850 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path747" d="m10937 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path749" d="m11023 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path751" d="m11111 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path753" d="m11197 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path755" d="m11284 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path757" d="m11370
+4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path759" d="m11458 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path761" d="m11544 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path763" d="m11630 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path765" d="m11718 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path767" d="m11804 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path769" d="m11891 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path771" d="m11977 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path773" d="m12065 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path775" d="m12151 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path777" d="m12237 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path779" d="m12325 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path781" d="m12411 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path783" d="m12498 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path785" d="m12584 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path787" d="m12672 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path789" d="m12758 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path791"
+d="m12844 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path793" d="m12931 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path795" d="m13018 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path797" d="m13105 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path799" d="m13191 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path801" d="m13279 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path803" d="m13365 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path805" d="m13451 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path807" d="m13538 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path809" d="m13625 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path811" d="m13712 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path813" d="m13798 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path815" d="m13886 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path817" d="m13972 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path819" d="m14058 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path821" d="m14145 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path823" d="m14232 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path825" d="m14319
+4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path827" d="m14405 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path829" d="m14493 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path831" d="m14579 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path833" d="m14665 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path835" d="m14752 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path837" d="m14839 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path839" d="m14926 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path841" d="m15012 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path843" d="m15100 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path845" d="m15186 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path847" d="m15272 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path849" d="m15359 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path851" d="m15446 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path853" d="m15533 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path855" d="m15619 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path857" d="m15707 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path859" d="m15793
+4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path861" d="m15880 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path863" d="m15966 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path865" d="m16053 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path867" d="m16140 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path869" d="m16226 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path871" d="m16313 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path873" d="m16400 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path875" d="m16487 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path877" d="m16573 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path879" d="m16660 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path881" d="m16747 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path883" d="m16833 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path885" d="m16920 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path887" d="m17007 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path889" d="m17094 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path891" d="m17180 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path893"
+d="m17267 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path895" d="m17354 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path897" d="m17440 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path899" d="m17527 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path901" d="m17614 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path903" d="m17701 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path905" d="m17787 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path907" d="m17874 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path909" d="m17961 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path911" d="m18047 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path913" d="m18134 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path915" d="m18221 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path917" d="m18308 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path919" d="m18394 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path921" d="m18481 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path923" d="m18568 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path925" d="m18654 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path927" d="m18741
+4235.9c17.255-0.9999 35.525-1.9999 53.795-4.9997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path929" d="m18828 4225.9c17.255-3.9998 34.51-8.9995 51.765-13.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path931" d="m18911 4200.9c16.24-5.9996 32.48-12.999 48.72-20.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path933" d="m18989 4164.9c15.225-7.9996 31.465-16.999 45.675-26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path935" d="m19062 4118.9c14.21-9.9994 28.42-20.999 42.63-31.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path937" d="m19129 4064.9c13.195-11.999 25.375-24.998 37.555-37.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path939" d="m19189 4002.9c11.165-13.999 22.33-27.998 33.495-41.998" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path941" d="m19241 3933.9c10.15-14.999 19.285-29.998 27.405-44.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path943" d="m19283 3860c7.105-15.999 14.21-32.998 20.3-48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path945" d="m19315 3780c5.075-16.999 9.135-33.998 13.195-50.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path947" d="m19333 3697c2.03-17.999 4.06-34.998 4.06-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path949" d="m19337 3612v-53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path951" d="m19337 3526v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path953" d="m19337 3441v-52.997" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path955" d="m19337 3355v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path957" d="m19337 3270v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path959" d="m19337 3184v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path961" d="m19337 3099v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path963" d="m19337 3014v-53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path965" d="m19337 2928v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path967" d="m19337 2843v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path969" d="m19337 2757v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path971" d="m19337 2672v-52.997" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path973" d="m19337 2586v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path975" d="m19337 2501v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path977" d="m19337 2415v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path979" d="m19337 2330v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path981" d="m19337 2245v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path983" d="m19337 2159.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path985" d="m19337 2074.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path987" d="m19337 1988.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path989" d="m19337 1903.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path991" d="m19337 1817.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path993" d="m19337 1732.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path995" d="m19337 1647.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path997" d="m19337 1561.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path999" d="m19337 1476.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1001" d="m19337 1390.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1003" d="m19337 1305.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1005" d="m19337
+1219.1c-1.015-16.999-3.045-34.998-5.075-51.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1007" d="m19326 1135.1c-4.06-16.999-8.12-34.998-14.21-50.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1009" d="m19301 1053.1c-6.09-15.999-13.195-32.998-21.315-48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1011" d="m19264 976.12c-9.135-15.999-18.27-30.998-28.42-45.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1013" d="m19216 904.13c-10.15-13.999-21.315-27.998-33.495-41.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1015" d="m19161 838.13c-12.18-12.999-24.36-24.998-37.555-36.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1017" d="m19098 780.14c-14.21-11.999-28.42-21.999-42.63-32.998" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path1019" d="m19028 729.14c-15.225-8.9995-30.45-17.999-46.69-26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1021" d="m18951 688.14c-16.24-7.9995-32.48-13.999-49.735-19.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1023" d="m18870 657.14c-17.255-4.9997-34.51-8.9995-51.765-11.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1025" d="m18786 640.14c-18.27-2.9998-35.525-3.9998-53.795-3.9998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1027" d="m18700 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1029" d="m18612 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1031" d="m18526 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1033" d="m18439 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1035" d="m18353 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1037" d="m18266 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1039" d="m18179 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1041" d="m18093 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1043" d="m18005 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1045" d="m17919 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1047" d="m17832 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1049" d="m17746 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1051" d="m17659 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1053" d="m17572 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1055" d="m17486 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1057" d="m17399 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1059" d="m17312 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1061" d="m17225 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1063" d="m17139 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1065" d="m17052 636.14h-54.81"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1067" d="m16965 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1069" d="m16879 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1071" d="m16792 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1073" d="m16705 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1075" d="m16618 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1077" d="m16532 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1079" d="m16445 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1081" d="m16358 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1083" d="m16272 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1085" d="m16185 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1087" d="m16098 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1089" d="m16011 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1091" d="m15925 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1093" d="m15837 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1095" d="m15751 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1097" d="m15665 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1099" d="m15578 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1101" d="m15491 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1103" d="m15404 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1105" d="m15318 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1107" d="m15230 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1109" d="m15144 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1111" d="m15058 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1113" d="m14971 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1115" d="m14884 636.14h-53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1117" d="m14797 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1119" d="m14711 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1121" d="m14624 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1123" d="m14537 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1125" d="m14451 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1127" d="m14364 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1129" d="m14277 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1131" d="m14190 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1133" d="m14104 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1135" d="m14017 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1137" d="m13930 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1139" d="m13844 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1141" d="m13757 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1143" d="m13670 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1145" d="m13583 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1147" d="m13497 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1149" d="m13410 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1151" d="m13323 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1153" d="m13237 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1155" d="m13150 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1157" d="m13063 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1159" d="m12976 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1161" d="m12890 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1163" d="m12803 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1165" d="m12716 636.14h-53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1167" d="m12630 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1169" d="m12543 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1171" d="m12456 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1173" d="m12369 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1175" d="m12283 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1177" d="m12196 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1179" d="m12109 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1181" d="m12022 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1183" d="m11936 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1185" d="m11850 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1187" d="m11762 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1189" d="m11676 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1191" d="m11589 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1193" d="m11502 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1195" d="m11415 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1197" d="m11329 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1199" d="m11243 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1201" d="m11155 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1203" d="m11069 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1205" d="m10982 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1207" d="m10895 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1209" d="m10808 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1211" d="m10722 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1213" d="m10636 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1215" d="m10548 636.14h-53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1217" d="m10462 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1219" d="m10375 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1221" d="m10288 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1223" d="m10201 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1225" d="m10115 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1227" d="m10029 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1229" d="m9941.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1231" d="m9855 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1233" d="m9767.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1235" d="m9681.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1237" d="m9594.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1239" d="m9507.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1241" d="m9421.6 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1243" d="m9334.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1245" d="m9248.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1247" d="m9160.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path1249" d="m9074.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1251" d="m8987.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1253" d="m8900.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1255" d="m8814.7 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1257" d="m8727.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1259" d="m8641.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1261" d="m8553.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1263" d="m8467.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1265"
+d="m8380.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1267" d="m8294 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1269" d="m8207.7 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1271" d="m8120.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1273" d="m8034.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1275" d="m7946.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1277" d="m7860.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1279" d="m7773.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1281" d="m7687 636.14h-53.795" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path1283" d="m7599.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1285" d="m7513.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1287" d="m7427.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1289" d="m7339.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1291" d="m7253.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1293" d="m7166.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1295" d="m7080 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1297" d="m6992.7 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1299" d="m6906.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1301" d="m6820.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1303" d="m6732.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1305" d="m6646.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1307" d="m6559.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1309" d="m6473.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1311" d="m6385.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1313" d="m6299.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path1315" d="m6213.2 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1317" d="m6125.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1319" d="m6039.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1321" d="m5952.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1323" d="m5866.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1325" d="m5778.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1327" d="m5692.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1329" d="m5606.2 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1331"
+d="m5519 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1333" d="m5432.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1335" d="m5345.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1337" d="m5259.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1339" d="m5171.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1341" d="m5085.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1343" d="m4999.3 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1345" d="m4912 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1347" d="m4825.7 636.14h-53.795" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path1349" d="m4738.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1351" d="m4652.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1353" d="m4564.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1355" d="m4478.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1357" d="m4392.3 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1359" d="m4305 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1361" d="m4218.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1363" d="m4131.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path1365" d="m4045.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1367" d="m3957.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1369" d="m3871.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1371" d="m3785.3 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1373" d="m3698 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1375" d="m3611.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1377" d="m3524.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1379" d="m3438.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1381"
+d="m3350.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1383" d="m3264.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1385" d="m3177.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1387" d="m3091.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1389" d="m3004.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1391" d="m2917.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1393" d="m2831.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1395" d="m2743.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1397" d="m2657.7 636.14h-53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1399" d="m2570.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1401" d="m2484.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1403" d="m2397.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1405" d="m2310.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1407" d="m2224.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1409" d="m2137 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1411" d="m2050.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1413" d="m1963.4 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1415" d="m1877.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1417" d="m1790.9 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1419" d="m1703.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1421" d="m1617.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1423" d="m1530 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1425" d="m1443.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1427" d="m1356.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1429" d="m1270.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1431" d="m1183.9 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1433" d="m1096.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1435" d="m1010.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1437" d="m923.03 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><g id="g4044" style=""><rect id="rect1441" x="21109" y="4753.1" width="1213.6" height="1100.7" fill="#f3e777" style=""/><path id="path1443" d="m20656 5536.4v-405.46l150.7-169.16c82.886-93.039 170.53-186.62 194.77-207.96l44.069-38.798 783.23-0.086 783.23-0.086v1227h-1956v-405.46zm1027.7 136.98v-78.372l-169.91 4.925-169.91 4.9249-5.09 45.854c-8.249 74.303 46.711 101.04 207.69 101.04h137.21v-78.372zm235.86-262.94 4.495-341.31 207.2-8.6408 207.2-8.6408
+5.144-46.443c9.596-86.615-41.863-102.05-322.02-96.607l-246.71 4.7956-4.438 419.08-4.439 419.08h149.08l4.494-341.31zm391.3 313.72c26.41-19.286 36.255-41.399 32.697-73.447l-5.09-45.854h-348.1l-5.38 48.984c-9.97 90.771 0.993 97.91 150.36 97.91 99.305 0 148.27-7.6982 175.52-27.594zm-627.16-274.84v-77.768h-348.1v66.246c0 36.436 4.973 71.431 11.051 77.768 6.078 6.3366 84.401 11.521 174.05 11.521h163v-77.768zm659.89-4.9154 5.125-74.042-179.18 4.9155-179.18 4.9155-5.38 48.984c-10.473 95.348-2.259 99.57 183.28 94.197l170.2-4.9284 5.125-74.042zm-659.89-237.63v-78.372l-169.91 4.925-169.91 4.925-5.097 73.447-5.097 73.447h350v-78.372zm659.86 4.925-5.097-73.447h-348.1l-5.38 48.984c-10.289 93.673-2.146 97.91 188.15 97.91h175.52l-5.097-73.447zm-659.86-228.98v-77.768h-137.21c-97.358 0-147.91 7.8138-174.05 26.902-34.952 25.523-49.645 92.242-25.79 117.11 6.078 6.3366 84.401 11.521 174.05
+11.521h163v-77.768z" fill="#ca4677" style=""/></g><text id="text1489" class="TextShape" transform="scale(1.1036 .90616)" x="171.41566" y="9913.7109" fill-rule="evenodd" font-family="Serif, serif" font-size="493.87px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1491" class="TextParagraph" font-family="Serif, serif" font-size="493.87px"/></text>
+<g id="g4048" style=""><rect id="rect1447" x="18797" y="13737" width="2320.7" height="2342.4" fill="#6076b3" style=""/><rect id="rect1451" x="18532" y="13817" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1453" x="18532" y="14076" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1455" x="18532" y="14334" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1457" x="18532" y="14593" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1459" x="18532" y="14851" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round"
+stroke-width="28.222" style=""/><rect id="rect1461" x="18532" y="15110" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1463" x="18532" y="15368" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1465" x="18532" y="15626" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1467" x="18532" y="15884" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1469" x="21080" y="13783" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1471" x="21080" y="14041" width="302.7"
+height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1473" x="21080" y="14299" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1475" x="21080" y="14558" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1477" x="21080" y="14816" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1479" x="21080" y="15075" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1481" x="21080" y="15333" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round"
+stroke-width="28.222" style=""/><rect id="rect1483" x="21080" y="15592" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1485" x="21080" y="15850" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><text id="text1493" transform="scale(1.1036 .90616)" x="17205.688" y="16777.641" fill="#000000" fill-rule="evenodd" font-family="Sans" font-size="856.96px" letter-spacing="0px" stroke-linejoin="round" stroke-width="28.222" word-spacing="0px" style="line-height:125%" line-height="125%" xml:space="preserve"><tspan id="tspan1495" x="17205.688" y="16777.641" style="">CPU</tspan></text>
+</g><text id="text1499" class="TextShape" x="-11700.553" y="565.61298" fill-rule="evenodd" font-family="Serif, serif" font-size="493.88px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1501" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1503" class="TextPosition" transform="matrix(0,-1,1,0,8509,40173)" x="12640.447" y="16397.613" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1505" fill="#000000" font-family="Serif, serif" font-size="493.88px">PCI, USB, SPI, I2C, ...</tspan></tspan></tspan></text>
+<path id="path1511" d="m12408 15562h-1115.1v-1420.3h2230.2v1420.3h-1115.1z" fill="#cfe7f5" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><path id="path1513" d="m12408 15562h-1115.1v-1420.3h2230.2v1420.3h-1115.1z" fill="none" stroke="#3465af" stroke-linejoin="round" stroke-width="19.847" style=""/><text id="text1515" class="TextShape" x="-1394.0863" y="590.73016" fill-rule="evenodd" font-family="Serif, serif" font-size="493.88px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1517" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1519" class="TextPosition" x="11487.915" y="14672.743" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1521" fill="#000000" font-family="Serif, serif" font-size="493.88px">Bridge</tspan></tspan></tspan></text>
+<text id="text1523" class="TextShape" x="-1450.5308" y="1324.5078" fill-rule="evenodd" font-family="Serif, serif" font-size="493.88px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1525" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1527" class="TextPosition" x="11431.471" y="15406.52" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1529" fill="#000000" font-family="Serif, serif" font-size="493.88px"> DMA</tspan></tspan></tspan></text>
+</svg>
diff --git a/Documentation/userspace-api/media/v4l/app-pri.rst b/Documentation/userspace-api/media/v4l/app-pri.rst
new file mode 100644
index 000000000000..5018ede2706f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/app-pri.rst
@@ -0,0 +1,37 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _app-pri:
+
+********************
+Application Priority
+********************
+
+When multiple applications share a device it may be desirable to assign
+them different priorities. Contrary to the traditional "rm -rf /" school
+of thought, a video recording application could for example block other
+applications from changing video controls or switching the current TV
+channel. Another objective is to permit low priority applications
+working in background, which can be preempted by user controlled
+applications and automatically regain control of the device at a later
+time.
+
+Since these features cannot be implemented entirely in user space V4L2
+defines the :ref:`VIDIOC_G_PRIORITY <VIDIOC_G_PRIORITY>` and
+:ref:`VIDIOC_S_PRIORITY <VIDIOC_G_PRIORITY>` ioctls to request and
+query the access priority associate with a file descriptor. Opening a
+device assigns a medium priority, compatible with earlier versions of
+V4L2 and drivers not supporting these ioctls. Applications requiring a
+different priority will usually call :ref:`VIDIOC_S_PRIORITY
+<VIDIOC_G_PRIORITY>` after verifying the device with the
+:ref:`VIDIOC_QUERYCAP` ioctl.
+
+Ioctls changing driver properties, such as
+:ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>`, return an ``EBUSY`` error code
+after another application obtained higher priority.
diff --git a/Documentation/userspace-api/media/v4l/async.rst b/Documentation/userspace-api/media/v4l/async.rst
new file mode 100644
index 000000000000..8bc4a726c95e
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/async.rst
@@ -0,0 +1,16 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _async:
+
+****************
+Asynchronous I/O
+****************
+
+This method is not defined yet.
diff --git a/Documentation/userspace-api/media/v4l/audio.rst b/Documentation/userspace-api/media/v4l/audio.rst
new file mode 100644
index 000000000000..d6bb85092e02
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/audio.rst
@@ -0,0 +1,104 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _audio:
+
+************************
+Audio Inputs and Outputs
+************************
+
+Audio inputs and outputs are physical connectors of a device. Video
+capture devices have inputs, output devices have outputs, zero or more
+each. Radio devices have no audio inputs or outputs. They have exactly
+one tuner which in fact *is* an audio source, but this API associates
+tuners with video inputs or outputs only, and radio devices have none of
+these. [#f1]_ A connector on a TV card to loop back the received audio
+signal to a sound card is not considered an audio output.
+
+Audio and video inputs and outputs are associated. Selecting a video
+source also selects an audio source. This is most evident when the video
+and audio source is a tuner. Further audio connectors can combine with
+more than one video input or output. Assumed two composite video inputs
+and two audio inputs exist, there may be up to four valid combinations.
+The relation of video and audio connectors is defined in the
+``audioset`` field of the respective struct
+:c:type:`v4l2_input` or struct
+:c:type:`v4l2_output`, where each bit represents the index
+number, starting at zero, of one audio input or output.
+
+To learn about the number and attributes of the available inputs and
+outputs applications can enumerate them with the
+:ref:`VIDIOC_ENUMAUDIO` and
+:ref:`VIDIOC_ENUMAUDOUT <VIDIOC_ENUMAUDOUT>` ioctl, respectively.
+The struct :c:type:`v4l2_audio` returned by the
+:ref:`VIDIOC_ENUMAUDIO` ioctl also contains signal
+status information applicable when the current audio input is queried.
+
+The :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` and
+:ref:`VIDIOC_G_AUDOUT <VIDIOC_G_AUDOUT>` ioctls report the current
+audio input and output, respectively.
+
+.. note::
+
+   Note that, unlike :ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` and
+   :ref:`VIDIOC_G_OUTPUT <VIDIOC_G_OUTPUT>` these ioctls return a
+   structure as :ref:`VIDIOC_ENUMAUDIO` and
+   :ref:`VIDIOC_ENUMAUDOUT <VIDIOC_ENUMAUDOUT>` do, not just an index.
+
+To select an audio input and change its properties applications call the
+:ref:`VIDIOC_S_AUDIO <VIDIOC_G_AUDIO>` ioctl. To select an audio
+output (which presently has no changeable properties) applications call
+the :ref:`VIDIOC_S_AUDOUT <VIDIOC_G_AUDOUT>` ioctl.
+
+Drivers must implement all audio input ioctls when the device has
+multiple selectable audio inputs, all audio output ioctls when the
+device has multiple selectable audio outputs. When the device has any
+audio inputs or outputs the driver must set the ``V4L2_CAP_AUDIO`` flag
+in the struct :c:type:`v4l2_capability` returned by
+the :ref:`VIDIOC_QUERYCAP` ioctl.
+
+
+Example: Information about the current audio input
+==================================================
+
+.. code-block:: c
+
+    struct v4l2_audio audio;
+
+    memset(&audio, 0, sizeof(audio));
+
+    if (-1 == ioctl(fd, VIDIOC_G_AUDIO, &audio)) {
+	perror("VIDIOC_G_AUDIO");
+	exit(EXIT_FAILURE);
+    }
+
+    printf("Current input: %s\\n", audio.name);
+
+
+Example: Switching to the first audio input
+===========================================
+
+.. code-block:: c
+
+    struct v4l2_audio audio;
+
+    memset(&audio, 0, sizeof(audio)); /* clear audio.mode, audio.reserved */
+
+    audio.index = 0;
+
+    if (-1 == ioctl(fd, VIDIOC_S_AUDIO, &audio)) {
+	perror("VIDIOC_S_AUDIO");
+	exit(EXIT_FAILURE);
+    }
+
+.. [#f1]
+   Actually struct :c:type:`v4l2_audio` ought to have a
+   ``tuner`` field like struct :c:type:`v4l2_input`, not
+   only making the API more consistent but also permitting radio devices
+   with multiple tuners.
diff --git a/Documentation/userspace-api/media/v4l/bayer.svg b/Documentation/userspace-api/media/v4l/bayer.svg
new file mode 100644
index 000000000000..82e805c68c1f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/bayer.svg
@@ -0,0 +1,56 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+    This file is dual-licensed: you can use it either under the terms
+    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+    dual licensing only applies to this file, and not this project as a
+    whole.
+
+    a) This file is free software; you can redistribute it and/or
+       modify it under the terms of the GNU General Public License as
+       published by the Free Software Foundation version 2 of
+       the License.
+
+       This file is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+       GNU General Public License for more details.
+
+    Or, alternatively,
+
+    b) Permission is granted to copy, distribute and/or modify this
+       document under the terms of the GNU Free Documentation License,
+       Version 1.1 or any later version published by the Free Software
+       Foundation, with no Invariant Sections, no Front-Cover Texts
+       and no Back-Cover Texts. A copy of the license is included at
+       Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg id="svg2" width="164.15mm" height="46.771mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 16415.333 4677.1107" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata652"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><g id="g186" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id6"><rect id="rect189" class="BoundingBox" x="3299" y="3199" width="1303" height="1203" fill="none"/><path id="path191" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path193" d="m3950
+4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text195" class="TextShape"><tspan id="tspan197" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan199" class="TextPosition" x="3739" y="4021"><tspan id="tspan201" fill="#ffffff">B</tspan></tspan></tspan></text>
+</g></g><g id="g203" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id7"><rect id="rect206" class="BoundingBox" x="4599" y="3199" width="1303" height="1203" fill="none"/><path id="path208" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path210" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text212" class="TextShape"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="5003" y="4021"><tspan id="tspan218" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g220" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id8"><rect id="rect223" class="BoundingBox" x="3299" y="4399" width="1303" height="1203" fill="none"/><path id="path225" d="m3950 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path227" d="m3950 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text229" class="TextShape"><tspan id="tspan231" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan233" class="TextPosition" x="3703" y="5221"><tspan id="tspan235" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g237" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id9"><rect id="rect240" class="BoundingBox" x="4599" y="4399" width="1303" height="1203" fill="none"/><path id="path242" d="m5250 5600h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path244" d="m5250 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text246" class="TextShape"><tspan id="tspan248" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan250" class="TextPosition" x="5022" y="5221"><tspan id="tspan252" fill="#ffffff">R</tspan></tspan></tspan></text>
+</g></g><g id="g254" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id10" fill="none"><rect id="rect257" class="BoundingBox" x="5999" y="3299" width="1003" height="1003"/><path id="path259" d="m6500 4300h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g261" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id11" fill="none"><rect id="rect264" class="BoundingBox" x="4699" y="5699" width="1003" height="1003"/><path id="path266" d="m5200 6700h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g268" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id12"><rect id="rect271" class="BoundingBox" x="4e3" y="6900" width="2374" height="963" fill="none"/><text id="text273" class="TextShape"><tspan id="tspan275" class="TextParagraph" font-family="sans-serif" font-size="635px"
+font-weight="400"><tspan id="tspan277" class="TextPosition" x="4250" y="7601"><tspan id="tspan279" fill="#000000">BGGR</tspan></tspan></tspan></text>
+</g></g><g id="g281" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id13"><rect id="rect284" class="BoundingBox" x="8799" y="3199" width="1303" height="1203" fill="none"/><path id="path286" d="m9450 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path288" d="m9450 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text290" class="TextShape"><tspan id="tspan292" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan294" class="TextPosition" x="9239" y="4021"><tspan id="tspan296" fill="#ffffff">B</tspan></tspan></tspan></text>
+</g></g><g id="g298" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id14"><rect id="rect301" class="BoundingBox" x="7499" y="3199" width="1303" height="1203" fill="none"/><path id="path303" d="m8150 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path305" d="m8150 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text307" class="TextShape"><tspan id="tspan309" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan311" class="TextPosition" x="7903" y="4021"><tspan id="tspan313" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g315" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id15"><rect id="rect318" class="BoundingBox" x="8799" y="4399" width="1303" height="1203" fill="none"/><path id="path320" d="m9450 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path322" d="m9450 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text324" class="TextShape"><tspan id="tspan326" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan328" class="TextPosition" x="9203" y="5221"><tspan id="tspan330" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g332" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id16"><rect id="rect335" class="BoundingBox" x="7499" y="4399" width="1303" height="1203" fill="none"/><path id="path337" d="m8150 5600h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path339" d="m8150 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text341" class="TextShape"><tspan id="tspan343" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan345" class="TextPosition" x="7922" y="5221"><tspan id="tspan347" fill="#ffffff">R</tspan></tspan></tspan></text>
+</g></g><g id="g349" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id17"><rect id="rect352" class="BoundingBox" x="8200" y="6900" width="2374" height="963" fill="none"/><text id="text354" class="TextShape"><tspan id="tspan356" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan358" class="TextPosition" x="8450" y="7601"><tspan id="tspan360" fill="#000000">GBRG</tspan></tspan></tspan></text>
+</g></g><g id="g362" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id18"><rect id="rect365" class="BoundingBox" x="17299" y="4399" width="1303" height="1203" fill="none"/><path id="path367" d="m17950 5600h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path369" d="m17950 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text371" class="TextShape"><tspan id="tspan373" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan375" class="TextPosition" x="17739" y="5221"><tspan id="tspan377" fill="#ffffff">B</tspan></tspan></tspan></text>
+</g></g><g id="g379" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id19"><rect id="rect382" class="BoundingBox" x="17299" y="3199" width="1303" height="1203" fill="none"/><path id="path384" d="m17950 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path386" d="m17950 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text388" class="TextShape"><tspan id="tspan390" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan392" class="TextPosition" x="17703" y="4021"><tspan id="tspan394" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g396" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id20"><rect id="rect399" class="BoundingBox" x="15999" y="4399" width="1303" height="1203" fill="none"/><path id="path401" d="m16650 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path403" d="m16650 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text405" class="TextShape"><tspan id="tspan407" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan409" class="TextPosition" x="16403" y="5221"><tspan id="tspan411" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g413" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id21"><rect id="rect416" class="BoundingBox" x="15999" y="3199" width="1303" height="1203" fill="none"/><path id="path418" d="m16650 4400h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path420" d="m16650 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text422" class="TextShape"><tspan id="tspan424" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan426" class="TextPosition" x="16422" y="4021"><tspan id="tspan428" fill="#ffffff">R</tspan></tspan></tspan></text>
+</g></g><g id="g430" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id22"><rect id="rect433" class="BoundingBox" x="16700" y="6900" width="2374" height="963" fill="none"/><text id="text435" class="TextShape"><tspan id="tspan437" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan439" class="TextPosition" x="16950" y="7601"><tspan id="tspan441" fill="#000000">RGGB</tspan></tspan></tspan></text>
+</g></g><g id="g443" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id23"><rect id="rect446" class="BoundingBox" x="11699" y="4399" width="1303" height="1203" fill="none"/><path id="path448" d="m12350 5600h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path450" d="m12350 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text452" class="TextShape"><tspan id="tspan454" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan456" class="TextPosition" x="12139" y="5221"><tspan id="tspan458" fill="#ffffff">B</tspan></tspan></tspan></text>
+</g></g><g id="g460" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id24"><rect id="rect463" class="BoundingBox" x="11699" y="3199" width="1303" height="1203" fill="none"/><path id="path465" d="m12350 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path467" d="m12350 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text469" class="TextShape"><tspan id="tspan471" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan473" class="TextPosition" x="12103" y="4021"><tspan id="tspan475" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g477" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id25"><rect id="rect480" class="BoundingBox" x="12999" y="4399" width="1303" height="1203" fill="none"/><path id="path482" d="m13650 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path484" d="m13650 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text486" class="TextShape"><tspan id="tspan488" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan490" class="TextPosition" x="13403" y="5221"><tspan id="tspan492" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g494" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id26"><rect id="rect497" class="BoundingBox" x="12999" y="3199" width="1303" height="1203" fill="none"/><path id="path499" d="m13650 4400h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path501" d="m13650 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text503" class="TextShape"><tspan id="tspan505" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan507" class="TextPosition" x="13422" y="4021"><tspan id="tspan509" fill="#ffffff">R</tspan></tspan></tspan></text>
+</g></g><g id="g511" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id27"><rect id="rect514" class="BoundingBox" x="12400" y="6900" width="2374" height="963" fill="none"/><text id="text516" class="TextShape"><tspan id="tspan518" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan520" class="TextPosition" x="12650" y="7601"><tspan id="tspan522" fill="#000000">GRBG</tspan></tspan></tspan></text>
+</g></g><g id="g524" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id28" fill="none"><rect id="rect527" class="BoundingBox" x="5999" y="5699" width="1003" height="1003"/><path id="path529" d="m6500 6700h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g531" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id29" fill="none"><rect id="rect534" class="BoundingBox" x="3399" y="5699" width="1003" height="1003"/><path id="path536" d="m3900 6700h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g538" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id30" fill="none"><rect id="rect541" class="BoundingBox" x="5999" y="4499" width="1003" height="1003"/><path id="path543" d="m6500 5500h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g545"
+class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id31" fill="none"><rect id="rect548" class="BoundingBox" x="7599" y="5799" width="1003" height="1003"/><path id="path550" d="m8100 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g552" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id32" fill="none"><rect id="rect555" class="BoundingBox" x="10199" y="5799" width="1003" height="1003"/><path id="path557" d="m10700 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g559" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id33" fill="none"><rect id="rect562" class="BoundingBox" x="8899" y="5799" width="1003" height="1003"/><path id="path564" d="m9400 6800h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g566" class="com.sun.star.drawing.CustomShape"
+transform="translate(-3285.9 -3185.9)"><g id="id34" fill="none"><rect id="rect569" class="BoundingBox" x="10199" y="4499" width="1003" height="1003"/><path id="path571" d="m10700 5500h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g573" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id35" fill="none"><rect id="rect576" class="BoundingBox" x="10199" y="3299" width="1003" height="1003"/><path id="path578" d="m10700 4300h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g580" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id36" fill="none"><rect id="rect583" class="BoundingBox" x="14399" y="3299" width="1003" height="1003"/><path id="path585" d="m14900 4300h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g587" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g
+id="id37" fill="none"><rect id="rect590" class="BoundingBox" x="14399" y="5799" width="1003" height="1003"/><path id="path592" d="m14900 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g594" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id38" fill="none"><rect id="rect597" class="BoundingBox" x="11799" y="5799" width="1003" height="1003"/><path id="path599" d="m12300 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g601" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id39" fill="none"><rect id="rect604" class="BoundingBox" x="14399" y="4499" width="1003" height="1003"/><path id="path606" d="m14900 5500h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g608" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id40" fill="none"><rect id="rect611"
+class="BoundingBox" x="13099" y="5799" width="1003" height="1003"/><path id="path613" d="m13600 6800h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g615" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id41" fill="none"><rect id="rect618" class="BoundingBox" x="16099" y="5799" width="1003" height="1003"/><path id="path620" d="m16600 6800h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g622" class="com.sun.star.drawing.CustomShape" transform="translate(-3398.8 -3185.9)"><g id="id42" fill="none"><rect id="rect625" class="BoundingBox" x="18799" y="5799" width="1003" height="1003"/><path id="path627" d="m19300 6800h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g629" class="com.sun.star.drawing.CustomShape" transform="translate(-3398.8 -3185.9)"><g id="id43" fill="none"><rect id="rect632" class="BoundingBox" x="18799" y="3299"
+width="1003" height="1003"/><path id="path634" d="m19300 4300h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g636" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id44" fill="none"><rect id="rect639" class="BoundingBox" x="17399" y="5799" width="1003" height="1003"/><path id="path641" d="m17900 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g643" class="com.sun.star.drawing.CustomShape" transform="translate(-3398.8 -3185.9)"><g id="id45" fill="none"><rect id="rect646" class="BoundingBox" x="18799" y="4499" width="1003" height="1003"/><path id="path648" d="m19300 5500h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g></svg>
diff --git a/Documentation/userspace-api/media/v4l/biblio.rst b/Documentation/userspace-api/media/v4l/biblio.rst
new file mode 100644
index 000000000000..3c9634173e82
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/biblio.rst
@@ -0,0 +1,416 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+**********
+References
+**********
+
+
+.. _cea608:
+
+CEA 608-E
+=========
+
+
+:title:     CEA-608-E R-2014 "Line 21 Data Services"
+
+:author:    Consumer Electronics Association (http://www.ce.org)
+
+.. _en300294:
+
+EN 300 294
+==========
+
+
+:title:     EN 300 294 "625-line television Wide Screen Signalling (WSS)"
+
+:author:    European Telecommunication Standards Institute (http://www.etsi.org)
+
+.. _ets300231:
+
+ETS 300 231
+===========
+
+
+:title:     ETS 300 231 "Specification of the domestic video Programme Delivery Control system (PDC)"
+
+:author:    European Telecommunication Standards Institute (http://www.etsi.org)
+
+.. _ets300706:
+
+ETS 300 706
+===========
+
+
+:title:     ETS 300 706 "Enhanced Teletext specification"
+
+:author:    European Telecommunication Standards Institute (http://www.etsi.org)
+
+.. _mpeg2part1:
+
+ISO 13818-1
+===========
+
+
+:title:     ITU-T Rec. H.222.0 | ISO/IEC 13818-1 "Information technology — Generic coding of moving pictures and associated audio information: Systems"
+
+:author:    International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch)
+
+.. _mpeg2part2:
+
+ISO 13818-2
+===========
+
+
+:title:     ITU-T Rec. H.262 | ISO/IEC 13818-2 "Information technology — Generic coding of moving pictures and associated audio information: Video"
+
+:author:    International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch)
+
+.. _itu470:
+
+ITU BT.470
+==========
+
+
+:title:     ITU-R Recommendation BT.470-6 "Conventional Television Systems"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
+.. _itu601:
+
+ITU BT.601
+==========
+
+
+:title:     ITU-R Recommendation BT.601-5 "Studio Encoding Parameters of Digital Television for Standard 4:3 and Wide-Screen 16:9 Aspect Ratios"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
+.. _itu653:
+
+ITU BT.653
+==========
+
+
+:title:     ITU-R Recommendation BT.653-3 "Teletext systems"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
+.. _itu709:
+
+ITU BT.709
+==========
+
+
+:title:     ITU-R Recommendation BT.709-5 "Parameter values for the HDTV standards for production and international programme exchange"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
+.. _itu1119:
+
+ITU BT.1119
+===========
+
+
+:title:     ITU-R Recommendation BT.1119 "625-line television Wide Screen Signalling (WSS)"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
+.. _h264:
+
+ITU-T Rec. H.264 Specification (04/2017 Edition)
+================================================
+
+:title:     ITU-T Recommendation H.264 "Advanced Video Coding for Generic Audiovisual Services"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
+.. _hevc:
+
+ITU H.265/HEVC
+==============
+
+:title:     ITU-T Rec. H.265 | ISO/IEC 23008-2 "High Efficiency Video Coding"
+
+:author:    International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch)
+
+.. _jfif:
+
+JFIF
+====
+
+
+:title:     JPEG File Interchange Format
+:subtitle:  Version 1.02
+
+:author:    Independent JPEG Group (http://www.ijg.org)
+
+.. _itu-t81:
+
+ITU-T.81
+========
+
+
+:title:     ITU-T Recommendation T.81 "Information Technology — Digital Compression and Coding of Continous-Tone Still Images — Requirements and Guidelines"
+
+:author:    International Telecommunication Union (http://www.itu.int)
+
+.. _w3c-jpeg-jfif:
+
+W3C JPEG JFIF
+=============
+
+
+:title:     JPEG JFIF
+
+:author:    The World Wide Web Consortium (http://www.w3.org)
+
+.. _smpte12m:
+
+SMPTE 12M
+=========
+
+
+:title:     SMPTE 12M-1999 "Television, Audio and Film - Time and Control Code"
+
+:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
+
+.. _smpte170m:
+
+SMPTE 170M
+==========
+
+
+:title:     SMPTE 170M-1999 "Television - Composite Analog Video Signal - NTSC for Studio Applications"
+
+:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
+
+.. _smpte240m:
+
+SMPTE 240M
+==========
+
+
+:title:     SMPTE 240M-1999 "Television - Signal Parameters - 1125-Line High-Definition Production"
+
+:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
+
+.. _smpte431:
+
+SMPTE RP 431-2
+==============
+
+
+:title:     SMPTE RP 431-2:2011 "D-Cinema Quality - Reference Projector and Environment"
+
+:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
+
+.. _smpte2084:
+
+SMPTE ST 2084
+=============
+
+
+:title:     SMPTE ST 2084:2014 "High Dynamic Range Electro-Optical Transfer Function of Master Reference Displays"
+
+:author:    Society of Motion Picture and Television Engineers (http://www.smpte.org)
+
+.. _srgb:
+
+sRGB
+====
+
+
+:title:     IEC 61966-2-1 ed1.0 "Multimedia systems and equipment - Colour measurement and management - Part 2-1: Colour management - Default RGB colour space - sRGB"
+
+:author:    International Electrotechnical Commission (http://www.iec.ch)
+
+.. _sycc:
+
+sYCC
+====
+
+
+:title:     IEC 61966-2-1-am1 ed1.0 "Amendment 1 - Multimedia systems and equipment - Colour measurement and management - Part 2-1: Colour management - Default RGB colour space - sRGB"
+
+:author:    International Electrotechnical Commission (http://www.iec.ch)
+
+.. _xvycc:
+
+xvYCC
+=====
+
+
+:title:     IEC 61966-2-4 ed1.0 "Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC"
+
+:author:    International Electrotechnical Commission (http://www.iec.ch)
+
+.. _oprgb:
+
+opRGB
+=====
+
+
+:title:     IEC 61966-2-5 "Multimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - Optional RGB colour space - opRGB"
+
+:author:    International Electrotechnical Commission (http://www.iec.ch)
+
+.. _itu2020:
+
+ITU BT.2020
+===========
+
+
+:title:     ITU-R Recommendation BT.2020 (08/2012) "Parameter values for ultra-high definition television systems for production and international programme exchange"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
+.. _tech3213:
+
+EBU Tech 3213
+=============
+
+
+:title:     E.B.U. Standard for Chromaticity Tolerances for Studio Monitors"
+
+:author:    European Broadcast Union (http://www.ebu.ch)
+
+.. _iec62106:
+
+IEC 62106
+=========
+
+
+:title:     Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz
+
+:author:    International Electrotechnical Commission (http://www.iec.ch)
+
+.. _nrsc4:
+
+NRSC-4-B
+========
+
+
+:title:     NRSC-4-B: United States RBDS Standard
+
+:author:    National Radio Systems Committee (http://www.nrscstandards.org)
+
+.. _iso12232:
+
+ISO 12232:2006
+==============
+
+
+:title:     Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index
+
+:author:    International Organization for Standardization (http://www.iso.org)
+
+.. _cea861:
+
+CEA-861-E
+=========
+
+
+:title:     A DTV Profile for Uncompressed High Speed Digital Interfaces
+
+:author:    Consumer Electronics Association (http://www.ce.org)
+
+.. _vesadmt:
+
+VESA DMT
+========
+
+
+:title:     VESA and Industry Standards and Guidelines for Computer Display Monitor Timing (DMT)
+
+:author:    Video Electronics Standards Association (http://www.vesa.org)
+
+.. _vesaedid:
+
+EDID
+====
+
+
+:title:     VESA Enhanced Extended Display Identification Data Standard
+:subtitle:  Release A, Revision 2
+
+:author:    Video Electronics Standards Association (http://www.vesa.org)
+
+.. _hdcp:
+
+HDCP
+====
+
+
+:title:     High-bandwidth Digital Content Protection System
+:subtitle:  Revision 1.3
+
+:author:    Digital Content Protection LLC (http://www.digital-cp.com)
+
+.. _hdmi:
+
+HDMI
+====
+
+
+:title:     High-Definition Multimedia Interface
+:subtitle:  Specification Version 1.4a
+
+:author:    HDMI Licensing LLC (http://www.hdmi.org)
+
+.. _hdmi2:
+
+HDMI2
+=====
+
+:title:     High-Definition Multimedia Interface
+:subtitle:  Specification Version 2.0
+
+:author:    HDMI Licensing LLC (http://www.hdmi.org)
+
+.. _dp:
+
+DP
+==
+
+
+:title:     VESA DisplayPort Standard
+:subtitle:  Version 1, Revision 2
+
+:author:    Video Electronics Standards Association (http://www.vesa.org)
+
+.. _poynton:
+
+poynton
+=======
+
+
+:title:     Digital Video and HDTV, Algorithms and Interfaces
+
+:author:    Charles Poynton
+
+.. _colimg:
+
+colimg
+======
+
+
+:title:     Color Imaging: Fundamentals and Applications
+
+:author:    Erik Reinhard et al.
+
+.. _vp8:
+
+VP8
+===
+
+
+:title:     RFC 6386: "VP8 Data Format and Decoding Guide"
+
+:author:    J. Bankoski et al.
diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst
new file mode 100644
index 000000000000..951ae1ed485f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/buffer.rst
@@ -0,0 +1,817 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _buffer:
+
+*******
+Buffers
+*******
+
+A buffer contains data exchanged by application and driver using one of
+the Streaming I/O methods. In the multi-planar API, the data is held in
+planes, while the buffer structure acts as a container for the planes.
+Only pointers to buffers (planes) are exchanged, the data itself is not
+copied. These pointers, together with meta-information like timestamps
+or field parity, are stored in a struct :c:type:`v4l2_buffer`,
+argument to the :ref:`VIDIOC_QUERYBUF`,
+:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` and
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. In the multi-planar API,
+some plane-specific members of struct :c:type:`v4l2_buffer`,
+such as pointers and sizes for each plane, are stored in struct
+struct :c:type:`v4l2_plane` instead. In that case, struct
+struct :c:type:`v4l2_buffer` contains an array of plane structures.
+
+Dequeued video buffers come with timestamps. The driver decides at which
+part of the frame and with which clock the timestamp is taken. Please
+see flags in the masks ``V4L2_BUF_FLAG_TIMESTAMP_MASK`` and
+``V4L2_BUF_FLAG_TSTAMP_SRC_MASK`` in :ref:`buffer-flags`. These flags
+are always valid and constant across all buffers during the whole video
+stream. Changes in these flags may take place as a side effect of
+:ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` or
+:ref:`VIDIOC_S_OUTPUT <VIDIOC_G_OUTPUT>` however. The
+``V4L2_BUF_FLAG_TIMESTAMP_COPY`` timestamp type which is used by e.g. on
+mem-to-mem devices is an exception to the rule: the timestamp source
+flags are copied from the OUTPUT video buffer to the CAPTURE video
+buffer.
+
+
+Interactions between formats, controls and buffers
+==================================================
+
+V4L2 exposes parameters that influence the buffer size, or the way data is
+laid out in the buffer. Those parameters are exposed through both formats and
+controls. One example of such a control is the ``V4L2_CID_ROTATE`` control
+that modifies the direction in which pixels are stored in the buffer, as well
+as the buffer size when the selected format includes padding at the end of
+lines.
+
+The set of information needed to interpret the content of a buffer (e.g. the
+pixel format, the line stride, the tiling orientation or the rotation) is
+collectively referred to in the rest of this section as the buffer layout.
+
+Controls that can modify the buffer layout shall set the
+``V4L2_CTRL_FLAG_MODIFY_LAYOUT`` flag.
+
+Modifying formats or controls that influence the buffer size or layout require
+the stream to be stopped. Any attempt at such a modification while the stream
+is active shall cause the ioctl setting the format or the control to return
+the ``EBUSY`` error code. In that case drivers shall also set the
+``V4L2_CTRL_FLAG_GRABBED`` flag when calling
+:c:func:`VIDIOC_QUERYCTRL` or :c:func:`VIDIOC_QUERY_EXT_CTRL` for such a
+control while the stream is active.
+
+.. note::
+
+   The :c:func:`VIDIOC_S_SELECTION` ioctl can, depending on the hardware (for
+   instance if the device doesn't include a scaler), modify the format in
+   addition to the selection rectangle. Similarly, the
+   :c:func:`VIDIOC_S_INPUT`, :c:func:`VIDIOC_S_OUTPUT`, :c:func:`VIDIOC_S_STD`
+   and :c:func:`VIDIOC_S_DV_TIMINGS` ioctls can also modify the format and
+   selection rectangles. When those ioctls result in a buffer size or layout
+   change, drivers shall handle that condition as they would handle it in the
+   :c:func:`VIDIOC_S_FMT` ioctl in all cases described in this section.
+
+Controls that only influence the buffer layout can be modified at any time
+when the stream is stopped. As they don't influence the buffer size, no
+special handling is needed to synchronize those controls with buffer
+allocation and the ``V4L2_CTRL_FLAG_GRABBED`` flag is cleared once the
+stream is stopped.
+
+Formats and controls that influence the buffer size interact with buffer
+allocation. The simplest way to handle this is for drivers to always require
+buffers to be reallocated in order to change those formats or controls. In
+that case, to perform such changes, userspace applications shall first stop
+the video stream with the :c:func:`VIDIOC_STREAMOFF` ioctl if it is running
+and free all buffers with the :c:func:`VIDIOC_REQBUFS` ioctl if they are
+allocated. After freeing all buffers the ``V4L2_CTRL_FLAG_GRABBED`` flag
+for controls is cleared. The format or controls can then be modified, and
+buffers shall then be reallocated and the stream restarted. A typical ioctl
+sequence is
+
+ #. VIDIOC_STREAMOFF
+ #. VIDIOC_REQBUFS(0)
+ #. VIDIOC_S_EXT_CTRLS
+ #. VIDIOC_S_FMT
+ #. VIDIOC_REQBUFS(n)
+ #. VIDIOC_QBUF
+ #. VIDIOC_STREAMON
+
+The second :c:func:`VIDIOC_REQBUFS` call will take the new format and control
+value into account to compute the buffer size to allocate. Applications can
+also retrieve the size by calling the :c:func:`VIDIOC_G_FMT` ioctl if needed.
+
+.. note::
+
+   The API doesn't mandate the above order for control (3.) and format (4.)
+   changes. Format and controls can be set in a different order, or even
+   interleaved, depending on the device and use case. For instance some
+   controls might behave differently for different pixel formats, in which
+   case the format might need to be set first.
+
+When reallocation is required, any attempt to modify format or controls that
+influences the buffer size while buffers are allocated shall cause the format
+or control set ioctl to return the ``EBUSY`` error. Any attempt to queue a
+buffer too small for the current format or controls shall cause the
+:c:func:`VIDIOC_QBUF` ioctl to return a ``EINVAL`` error.
+
+Buffer reallocation is an expensive operation. To avoid that cost, drivers can
+(and are encouraged to) allow format or controls that influence the buffer
+size to be changed with buffers allocated. In that case, a typical ioctl
+sequence to modify format and controls is
+
+ #. VIDIOC_STREAMOFF
+ #. VIDIOC_S_EXT_CTRLS
+ #. VIDIOC_S_FMT
+ #. VIDIOC_QBUF
+ #. VIDIOC_STREAMON
+
+For this sequence to operate correctly, queued buffers need to be large enough
+for the new format or controls. Drivers shall return a ``ENOSPC`` error in
+response to format change (:c:func:`VIDIOC_S_FMT`) or control changes
+(:c:func:`VIDIOC_S_CTRL` or :c:func:`VIDIOC_S_EXT_CTRLS`) if buffers too small
+for the new format are currently queued. As a simplification, drivers are
+allowed to return a ``EBUSY`` error from these ioctls if any buffer is
+currently queued, without checking the queued buffers sizes.
+
+Additionally, drivers shall return a ``EINVAL`` error from the
+:c:func:`VIDIOC_QBUF` ioctl if the buffer being queued is too small for the
+current format or controls. Together, these requirements ensure that queued
+buffers will always be large enough for the configured format and controls.
+
+Userspace applications can query the buffer size required for a given format
+and controls by first setting the desired control values and then trying the
+desired format. The :c:func:`VIDIOC_TRY_FMT` ioctl will return the required
+buffer size.
+
+ #. VIDIOC_S_EXT_CTRLS(x)
+ #. VIDIOC_TRY_FMT()
+ #. VIDIOC_S_EXT_CTRLS(y)
+ #. VIDIOC_TRY_FMT()
+
+The :c:func:`VIDIOC_CREATE_BUFS` ioctl can then be used to allocate buffers
+based on the queried sizes (for instance by allocating a set of buffers large
+enough for all the desired formats and controls, or by allocating separate set
+of appropriately sized buffers for each use case).
+
+
+.. c:type:: v4l2_buffer
+
+struct v4l2_buffer
+==================
+
+.. tabularcolumns:: |p{2.8cm}|p{2.5cm}|p{1.6cm}|p{10.2cm}|
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_buffer
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 2 10
+
+    * - __u32
+      - ``index``
+      - Number of the buffer, set by the application except when calling
+	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, then it is set by the
+	driver. This field can range from zero to the number of buffers
+	allocated with the :ref:`VIDIOC_REQBUFS` ioctl
+	(struct :c:type:`v4l2_requestbuffers`
+	``count``), plus any buffers allocated with
+	:ref:`VIDIOC_CREATE_BUFS` minus one.
+    * - __u32
+      - ``type``
+      - Type of the buffer, same as struct
+	:c:type:`v4l2_format` ``type`` or struct
+	:c:type:`v4l2_requestbuffers` ``type``, set
+	by the application. See :c:type:`v4l2_buf_type`
+    * - __u32
+      - ``bytesused``
+      - The number of bytes occupied by the data in the buffer. It depends
+	on the negotiated data format and may change with each buffer for
+	compressed variable size data like JPEG images. Drivers must set
+	this field when ``type`` refers to a capture stream, applications
+	when it refers to an output stream. If the application sets this
+	to 0 for an output stream, then ``bytesused`` will be set to the
+	size of the buffer (see the ``length`` field of this struct) by
+	the driver. For multiplanar formats this field is ignored and the
+	``planes`` pointer is used instead.
+    * - __u32
+      - ``flags``
+      - Flags set by the application or driver, see :ref:`buffer-flags`.
+    * - __u32
+      - ``field``
+      - Indicates the field order of the image in the buffer, see
+	:c:type:`v4l2_field`. This field is not used when the buffer
+	contains VBI data. Drivers must set it when ``type`` refers to a
+	capture stream, applications when it refers to an output stream.
+    * - struct timeval
+      - ``timestamp``
+      - For capture streams this is time when the first data byte was
+	captured, as returned by the :c:func:`clock_gettime()` function
+	for the relevant clock id; see ``V4L2_BUF_FLAG_TIMESTAMP_*`` in
+	:ref:`buffer-flags`. For output streams the driver stores the
+	time at which the last data byte was actually sent out in the
+	``timestamp`` field. This permits applications to monitor the
+	drift between the video and system clock. For output streams that
+	use ``V4L2_BUF_FLAG_TIMESTAMP_COPY`` the application has to fill
+	in the timestamp which will be copied by the driver to the capture
+	stream.
+    * - struct :c:type:`v4l2_timecode`
+      - ``timecode``
+      - When the ``V4L2_BUF_FLAG_TIMECODE`` flag is set in ``flags``, this
+	structure contains a frame timecode. In
+	:c:type:`V4L2_FIELD_ALTERNATE <v4l2_field>` mode the top and
+	bottom field contain the same timecode. Timecodes are intended to
+	help video editing and are typically recorded on video tapes, but
+	also embedded in compressed formats like MPEG. This field is
+	independent of the ``timestamp`` and ``sequence`` fields.
+    * - __u32
+      - ``sequence``
+      - Set by the driver, counting the frames (not fields!) in sequence.
+	This field is set for both input and output devices.
+    * - :cspan:`2`
+
+	In :c:type:`V4L2_FIELD_ALTERNATE <v4l2_field>` mode the top and
+	bottom field have the same sequence number. The count starts at
+	zero and includes dropped or repeated frames. A dropped frame was
+	received by an input device but could not be stored due to lack of
+	free buffer space. A repeated frame was displayed again by an
+	output device because the application did not pass new data in
+	time.
+
+	.. note::
+
+	   This may count the frames received e.g. over USB, without
+	   taking into account the frames dropped by the remote hardware due
+	   to limited compression throughput or bus bandwidth. These devices
+	   identify by not enumerating any video standards, see
+	   :ref:`standard`.
+
+    * - __u32
+      - ``memory``
+      - This field must be set by applications and/or drivers in
+	accordance with the selected I/O method. See :c:type:`v4l2_memory`
+    * - union {
+      - ``m``
+    * - __u32
+      - ``offset``
+      - For the single-planar API and when ``memory`` is
+	``V4L2_MEMORY_MMAP`` this is the offset of the buffer from the
+	start of the device memory. The value is returned by the driver
+	and apart of serving as parameter to the
+	:ref:`mmap() <func-mmap>` function not useful for applications.
+	See :ref:`mmap` for details
+    * - unsigned long
+      - ``userptr``
+      - For the single-planar API and when ``memory`` is
+	``V4L2_MEMORY_USERPTR`` this is a pointer to the buffer (casted to
+	unsigned long type) in virtual memory, set by the application. See
+	:ref:`userp` for details.
+    * - struct v4l2_plane
+      - ``*planes``
+      - When using the multi-planar API, contains a userspace pointer to
+	an array of struct :c:type:`v4l2_plane`. The size of
+	the array should be put in the ``length`` field of this
+	struct :c:type:`v4l2_buffer` structure.
+    * - int
+      - ``fd``
+      - For the single-plane API and when ``memory`` is
+	``V4L2_MEMORY_DMABUF`` this is the file descriptor associated with
+	a DMABUF buffer.
+    * - }
+      -
+    * - __u32
+      - ``length``
+      - Size of the buffer (not the payload) in bytes for the
+	single-planar API. This is set by the driver based on the calls to
+	:ref:`VIDIOC_REQBUFS` and/or
+	:ref:`VIDIOC_CREATE_BUFS`. For the
+	multi-planar API the application sets this to the number of
+	elements in the ``planes`` array. The driver will fill in the
+	actual number of valid elements in that array.
+    * - __u32
+      - ``reserved2``
+      - A place holder for future extensions. Drivers and applications
+	must set this to 0.
+    * - __u32
+      - ``request_fd``
+      - The file descriptor of the request to queue the buffer to. If the flag
+        ``V4L2_BUF_FLAG_REQUEST_FD`` is set, then the buffer will be
+	queued to this request. If the flag is not set, then this field will
+	be ignored.
+
+	The ``V4L2_BUF_FLAG_REQUEST_FD`` flag and this field are only used by
+	:ref:`ioctl VIDIOC_QBUF <VIDIOC_QBUF>` and ignored by other ioctls that
+	take a :c:type:`v4l2_buffer` as argument.
+
+	Applications should not set ``V4L2_BUF_FLAG_REQUEST_FD`` for any ioctls
+	other than :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`.
+
+	If the device does not support requests, then ``EBADR`` will be returned.
+	If requests are supported but an invalid request file descriptor is
+	given, then ``EINVAL`` will be returned.
+
+
+
+.. c:type:: v4l2_plane
+
+struct v4l2_plane
+=================
+
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``bytesused``
+      - The number of bytes occupied by data in the plane (its payload).
+	Drivers must set this field when ``type`` refers to a capture
+	stream, applications when it refers to an output stream. If the
+	application sets this to 0 for an output stream, then
+	``bytesused`` will be set to the size of the plane (see the
+	``length`` field of this struct) by the driver.
+
+	.. note::
+
+	   Note that the actual image data starts at ``data_offset``
+	   which may not be 0.
+    * - __u32
+      - ``length``
+      - Size in bytes of the plane (not its payload). This is set by the
+	driver based on the calls to
+	:ref:`VIDIOC_REQBUFS` and/or
+	:ref:`VIDIOC_CREATE_BUFS`.
+    * - union {
+      - ``m``
+    * - __u32
+      - ``mem_offset``
+      - When the memory type in the containing struct
+	:c:type:`v4l2_buffer` is ``V4L2_MEMORY_MMAP``, this
+	is the value that should be passed to :ref:`mmap() <func-mmap>`,
+	similar to the ``offset`` field in struct
+	:c:type:`v4l2_buffer`.
+    * - unsigned long
+      - ``userptr``
+      - When the memory type in the containing struct
+	:c:type:`v4l2_buffer` is ``V4L2_MEMORY_USERPTR``,
+	this is a userspace pointer to the memory allocated for this plane
+	by an application.
+    * - int
+      - ``fd``
+      - When the memory type in the containing struct
+	:c:type:`v4l2_buffer` is ``V4L2_MEMORY_DMABUF``,
+	this is a file descriptor associated with a DMABUF buffer, similar
+	to the ``fd`` field in struct :c:type:`v4l2_buffer`.
+    * - }
+      -
+    * - __u32
+      - ``data_offset``
+      - Offset in bytes to video data in the plane. Drivers must set this
+	field when ``type`` refers to a capture stream, applications when
+	it refers to an output stream.
+
+	.. note::
+
+	   That data_offset is included  in ``bytesused``. So the
+	   size of the image in the plane is ``bytesused``-``data_offset``
+	   at offset ``data_offset`` from the start of the plane.
+    * - __u32
+      - ``reserved[11]``
+      - Reserved for future use. Should be zeroed by drivers and
+	applications.
+
+
+
+.. c:type:: v4l2_buf_type
+
+enum v4l2_buf_type
+==================
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{7.8cm}|p{0.6cm}|p{9.1cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       4 1 9
+
+    * - ``V4L2_BUF_TYPE_VIDEO_CAPTURE``
+      - 1
+      - Buffer of a single-planar video capture stream, see
+	:ref:`capture`.
+    * - ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``
+      - 9
+      - Buffer of a multi-planar video capture stream, see
+	:ref:`capture`.
+    * - ``V4L2_BUF_TYPE_VIDEO_OUTPUT``
+      - 2
+      - Buffer of a single-planar video output stream, see
+	:ref:`output`.
+    * - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``
+      - 10
+      - Buffer of a multi-planar video output stream, see :ref:`output`.
+    * - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``
+      - 3
+      - Buffer for video overlay, see :ref:`overlay`.
+    * - ``V4L2_BUF_TYPE_VBI_CAPTURE``
+      - 4
+      - Buffer of a raw VBI capture stream, see :ref:`raw-vbi`.
+    * - ``V4L2_BUF_TYPE_VBI_OUTPUT``
+      - 5
+      - Buffer of a raw VBI output stream, see :ref:`raw-vbi`.
+    * - ``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE``
+      - 6
+      - Buffer of a sliced VBI capture stream, see :ref:`sliced`.
+    * - ``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``
+      - 7
+      - Buffer of a sliced VBI output stream, see :ref:`sliced`.
+    * - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY``
+      - 8
+      - Buffer for video output overlay (OSD), see :ref:`osd`.
+    * - ``V4L2_BUF_TYPE_SDR_CAPTURE``
+      - 11
+      - Buffer for Software Defined Radio (SDR) capture stream, see
+	:ref:`sdr`.
+    * - ``V4L2_BUF_TYPE_SDR_OUTPUT``
+      - 12
+      - Buffer for Software Defined Radio (SDR) output stream, see
+	:ref:`sdr`.
+    * - ``V4L2_BUF_TYPE_META_CAPTURE``
+      - 13
+      - Buffer for metadata capture, see :ref:`metadata`.
+    * - ``V4L2_BUF_TYPE_META_OUTPUT``
+      - 14
+      - Buffer for metadata output, see :ref:`metadata`.
+
+
+
+.. _buffer-flags:
+
+Buffer Flags
+============
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{7.0cm}|p{2.1cm}|p{8.4cm}|
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * .. _`V4L2-BUF-FLAG-MAPPED`:
+
+      - ``V4L2_BUF_FLAG_MAPPED``
+      - 0x00000001
+      - The buffer resides in device memory and has been mapped into the
+	application's address space, see :ref:`mmap` for details.
+	Drivers set or clear this flag when the
+	:ref:`VIDIOC_QUERYBUF`,
+	:ref:`VIDIOC_QBUF` or
+	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called. Set by the
+	driver.
+    * .. _`V4L2-BUF-FLAG-QUEUED`:
+
+      - ``V4L2_BUF_FLAG_QUEUED``
+      - 0x00000002
+      - Internally drivers maintain two buffer queues, an incoming and
+	outgoing queue. When this flag is set, the buffer is currently on
+	the incoming queue. It automatically moves to the outgoing queue
+	after the buffer has been filled (capture devices) or displayed
+	(output devices). Drivers set or clear this flag when the
+	``VIDIOC_QUERYBUF`` ioctl is called. After (successful) calling
+	the ``VIDIOC_QBUF``\ ioctl it is always set and after
+	``VIDIOC_DQBUF`` always cleared.
+    * .. _`V4L2-BUF-FLAG-DONE`:
+
+      - ``V4L2_BUF_FLAG_DONE``
+      - 0x00000004
+      - When this flag is set, the buffer is currently on the outgoing
+	queue, ready to be dequeued from the driver. Drivers set or clear
+	this flag when the ``VIDIOC_QUERYBUF`` ioctl is called. After
+	calling the ``VIDIOC_QBUF`` or ``VIDIOC_DQBUF`` it is always
+	cleared. Of course a buffer cannot be on both queues at the same
+	time, the ``V4L2_BUF_FLAG_QUEUED`` and ``V4L2_BUF_FLAG_DONE`` flag
+	are mutually exclusive. They can be both cleared however, then the
+	buffer is in "dequeued" state, in the application domain so to
+	say.
+    * .. _`V4L2-BUF-FLAG-ERROR`:
+
+      - ``V4L2_BUF_FLAG_ERROR``
+      - 0x00000040
+      - When this flag is set, the buffer has been dequeued successfully,
+	although the data might have been corrupted. This is recoverable,
+	streaming may continue as normal and the buffer may be reused
+	normally. Drivers set this flag when the ``VIDIOC_DQBUF`` ioctl is
+	called.
+    * .. _`V4L2-BUF-FLAG-IN-REQUEST`:
+
+      - ``V4L2_BUF_FLAG_IN_REQUEST``
+      - 0x00000080
+      - This buffer is part of a request that hasn't been queued yet.
+    * .. _`V4L2-BUF-FLAG-KEYFRAME`:
+
+      - ``V4L2_BUF_FLAG_KEYFRAME``
+      - 0x00000008
+      - Drivers set or clear this flag when calling the ``VIDIOC_DQBUF``
+	ioctl. It may be set by video capture devices when the buffer
+	contains a compressed image which is a key frame (or field), i. e.
+	can be decompressed on its own. Also known as an I-frame.
+	Applications can set this bit when ``type`` refers to an output
+	stream.
+    * .. _`V4L2-BUF-FLAG-PFRAME`:
+
+      - ``V4L2_BUF_FLAG_PFRAME``
+      - 0x00000010
+      - Similar to ``V4L2_BUF_FLAG_KEYFRAME`` this flags predicted frames
+	or fields which contain only differences to a previous key frame.
+	Applications can set this bit when ``type`` refers to an output
+	stream.
+    * .. _`V4L2-BUF-FLAG-BFRAME`:
+
+      - ``V4L2_BUF_FLAG_BFRAME``
+      - 0x00000020
+      - Similar to ``V4L2_BUF_FLAG_KEYFRAME`` this flags a bi-directional
+	predicted frame or field which contains only the differences
+	between the current frame and both the preceding and following key
+	frames to specify its content. Applications can set this bit when
+	``type`` refers to an output stream.
+    * .. _`V4L2-BUF-FLAG-TIMECODE`:
+
+      - ``V4L2_BUF_FLAG_TIMECODE``
+      - 0x00000100
+      - The ``timecode`` field is valid. Drivers set or clear this flag
+	when the ``VIDIOC_DQBUF`` ioctl is called. Applications can set
+	this bit and the corresponding ``timecode`` structure when
+	``type`` refers to an output stream.
+    * .. _`V4L2-BUF-FLAG-PREPARED`:
+
+      - ``V4L2_BUF_FLAG_PREPARED``
+      - 0x00000400
+      - The buffer has been prepared for I/O and can be queued by the
+	application. Drivers set or clear this flag when the
+	:ref:`VIDIOC_QUERYBUF`,
+	:ref:`VIDIOC_PREPARE_BUF <VIDIOC_QBUF>`,
+	:ref:`VIDIOC_QBUF` or
+	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called.
+    * .. _`V4L2-BUF-FLAG-NO-CACHE-INVALIDATE`:
+
+      - ``V4L2_BUF_FLAG_NO_CACHE_INVALIDATE``
+      - 0x00000800
+      - Caches do not have to be invalidated for this buffer. Typically
+	applications shall use this flag if the data captured in the
+	buffer is not going to be touched by the CPU, instead the buffer
+	will, probably, be passed on to a DMA-capable hardware unit for
+	further processing or output.
+    * .. _`V4L2-BUF-FLAG-NO-CACHE-CLEAN`:
+
+      - ``V4L2_BUF_FLAG_NO_CACHE_CLEAN``
+      - 0x00001000
+      - Caches do not have to be cleaned for this buffer. Typically
+	applications shall use this flag for output buffers if the data in
+	this buffer has not been created by the CPU but by some
+	DMA-capable unit, in which case caches have not been used.
+    * .. _`V4L2-BUF-FLAG-M2M-HOLD-CAPTURE-BUF`:
+
+      - ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF``
+      - 0x00000200
+      - Only valid if ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` is
+	set. It is typically used with stateless decoders where multiple
+	output buffers each decode to a slice of the decoded frame.
+	Applications can set this flag when queueing the output buffer
+	to prevent the driver from dequeueing the capture buffer after
+	the output buffer has been decoded (i.e. the capture buffer is
+	'held'). If the timestamp of this output buffer differs from that
+	of the previous output buffer, then that indicates the start of a
+	new frame and the previously held capture buffer is dequeued.
+    * .. _`V4L2-BUF-FLAG-LAST`:
+
+      - ``V4L2_BUF_FLAG_LAST``
+      - 0x00100000
+      - Last buffer produced by the hardware. mem2mem codec drivers set
+	this flag on the capture queue for the last buffer when the
+	:ref:`VIDIOC_QUERYBUF` or
+	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called. Due to
+	hardware limitations, the last buffer may be empty. In this case
+	the driver will set the ``bytesused`` field to 0, regardless of
+	the format. Any Any subsequent call to the
+	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will not block anymore,
+	but return an ``EPIPE`` error code.
+    * .. _`V4L2-BUF-FLAG-REQUEST-FD`:
+
+      - ``V4L2_BUF_FLAG_REQUEST_FD``
+      - 0x00800000
+      - The ``request_fd`` field contains a valid file descriptor.
+    * .. _`V4L2-BUF-FLAG-TIMESTAMP-MASK`:
+
+      - ``V4L2_BUF_FLAG_TIMESTAMP_MASK``
+      - 0x0000e000
+      - Mask for timestamp types below. To test the timestamp type, mask
+	out bits not belonging to timestamp type by performing a logical
+	and operation with buffer flags and timestamp mask.
+    * .. _`V4L2-BUF-FLAG-TIMESTAMP-UNKNOWN`:
+
+      - ``V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN``
+      - 0x00000000
+      - Unknown timestamp type. This type is used by drivers before Linux
+	3.9 and may be either monotonic (see below) or realtime (wall
+	clock). Monotonic clock has been favoured in embedded systems
+	whereas most of the drivers use the realtime clock. Either kinds
+	of timestamps are available in user space via
+	:c:func:`clock_gettime` using clock IDs ``CLOCK_MONOTONIC``
+	and ``CLOCK_REALTIME``, respectively.
+    * .. _`V4L2-BUF-FLAG-TIMESTAMP-MONOTONIC`:
+
+      - ``V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC``
+      - 0x00002000
+      - The buffer timestamp has been taken from the ``CLOCK_MONOTONIC``
+	clock. To access the same clock outside V4L2, use
+	:c:func:`clock_gettime`.
+    * .. _`V4L2-BUF-FLAG-TIMESTAMP-COPY`:
+
+      - ``V4L2_BUF_FLAG_TIMESTAMP_COPY``
+      - 0x00004000
+      - The CAPTURE buffer timestamp has been taken from the corresponding
+	OUTPUT buffer. This flag applies only to mem2mem devices.
+    * .. _`V4L2-BUF-FLAG-TSTAMP-SRC-MASK`:
+
+      - ``V4L2_BUF_FLAG_TSTAMP_SRC_MASK``
+      - 0x00070000
+      - Mask for timestamp sources below. The timestamp source defines the
+	point of time the timestamp is taken in relation to the frame.
+	Logical 'and' operation between the ``flags`` field and
+	``V4L2_BUF_FLAG_TSTAMP_SRC_MASK`` produces the value of the
+	timestamp source. Applications must set the timestamp source when
+	``type`` refers to an output stream and
+	``V4L2_BUF_FLAG_TIMESTAMP_COPY`` is set.
+    * .. _`V4L2-BUF-FLAG-TSTAMP-SRC-EOF`:
+
+      - ``V4L2_BUF_FLAG_TSTAMP_SRC_EOF``
+      - 0x00000000
+      - End Of Frame. The buffer timestamp has been taken when the last
+	pixel of the frame has been received or the last pixel of the
+	frame has been transmitted. In practice, software generated
+	timestamps will typically be read from the clock a small amount of
+	time after the last pixel has been received or transmitten,
+	depending on the system and other activity in it.
+    * .. _`V4L2-BUF-FLAG-TSTAMP-SRC-SOE`:
+
+      - ``V4L2_BUF_FLAG_TSTAMP_SRC_SOE``
+      - 0x00010000
+      - Start Of Exposure. The buffer timestamp has been taken when the
+	exposure of the frame has begun. This is only valid for the
+	``V4L2_BUF_TYPE_VIDEO_CAPTURE`` buffer type.
+
+.. raw:: latex
+
+    \normalsize
+
+
+.. c:type:: v4l2_memory
+
+enum v4l2_memory
+================
+
+.. tabularcolumns:: |p{5.0cm}|p{0.8cm}|p{11.7cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_MEMORY_MMAP``
+      - 1
+      - The buffer is used for :ref:`memory mapping <mmap>` I/O.
+    * - ``V4L2_MEMORY_USERPTR``
+      - 2
+      - The buffer is used for :ref:`user pointer <userp>` I/O.
+    * - ``V4L2_MEMORY_OVERLAY``
+      - 3
+      - [to do]
+    * - ``V4L2_MEMORY_DMABUF``
+      - 4
+      - The buffer is used for :ref:`DMA shared buffer <dmabuf>` I/O.
+
+
+
+Timecodes
+=========
+
+The :c:type:`v4l2_buffer_timecode` structure is designed to hold a
+:ref:`smpte12m` or similar timecode.
+(struct :c:type:`timeval` timestamps are stored in the struct
+:c:type:`v4l2_buffer` ``timestamp`` field.)
+
+
+.. c:type:: v4l2_timecode
+
+struct v4l2_timecode
+--------------------
+
+.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{12.3cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Frame rate the timecodes are based on, see :ref:`timecode-type`.
+    * - __u32
+      - ``flags``
+      - Timecode flags, see :ref:`timecode-flags`.
+    * - __u8
+      - ``frames``
+      - Frame count, 0 ... 23/24/29/49/59, depending on the type of
+	timecode.
+    * - __u8
+      - ``seconds``
+      - Seconds count, 0 ... 59. This is a binary, not BCD number.
+    * - __u8
+      - ``minutes``
+      - Minutes count, 0 ... 59. This is a binary, not BCD number.
+    * - __u8
+      - ``hours``
+      - Hours count, 0 ... 29. This is a binary, not BCD number.
+    * - __u8
+      - ``userbits``\ [4]
+      - The "user group" bits from the timecode.
+
+
+
+.. _timecode-type:
+
+Timecode Types
+--------------
+
+.. tabularcolumns:: |p{5.6cm}|p{0.8cm}|p{11.1cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_TC_TYPE_24FPS``
+      - 1
+      - 24 frames per second, i. e. film.
+    * - ``V4L2_TC_TYPE_25FPS``
+      - 2
+      - 25 frames per second, i. e. PAL or SECAM video.
+    * - ``V4L2_TC_TYPE_30FPS``
+      - 3
+      - 30 frames per second, i. e. NTSC video.
+    * - ``V4L2_TC_TYPE_50FPS``
+      - 4
+      -
+    * - ``V4L2_TC_TYPE_60FPS``
+      - 5
+      -
+
+
+
+.. _timecode-flags:
+
+Timecode Flags
+--------------
+
+.. tabularcolumns:: |p{6.6cm}|p{1.4cm}|p{9.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_TC_FLAG_DROPFRAME``
+      - 0x0001
+      - Indicates "drop frame" semantics for counting frames in 29.97 fps
+	material. When set, frame numbers 0 and 1 at the start of each
+	minute, except minutes 0, 10, 20, 30, 40, 50 are omitted from the
+	count.
+    * - ``V4L2_TC_FLAG_COLORFRAME``
+      - 0x0002
+      - The "color frame" flag.
+    * - ``V4L2_TC_USERBITS_field``
+      - 0x000C
+      - Field mask for the "binary group flags".
+    * - ``V4L2_TC_USERBITS_USERDEFINED``
+      - 0x0000
+      - Unspecified format.
+    * - ``V4L2_TC_USERBITS_8BITCHARS``
+      - 0x0008
+      - 8-bit ISO characters.
diff --git a/Documentation/userspace-api/media/v4l/capture-example.rst b/Documentation/userspace-api/media/v4l/capture-example.rst
new file mode 100644
index 000000000000..6aa67c5aff8f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/capture-example.rst
@@ -0,0 +1,20 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _capture-example:
+
+*********************
+Video Capture Example
+*********************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    capture.c
diff --git a/Documentation/userspace-api/media/v4l/capture.c.rst b/Documentation/userspace-api/media/v4l/capture.c.rst
new file mode 100644
index 000000000000..30f7c816e858
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/capture.c.rst
@@ -0,0 +1,671 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+file: media/v4l/capture.c
+=========================
+
+.. code-block:: c
+
+    /*
+     *  V4L2 video capture example
+     *
+     *  This program can be used and distributed without restrictions.
+     *
+     *      This program is provided with the V4L2 API
+     * see https://linuxtv.org/docs.php for more information
+     */
+
+    #include <stdio.h>
+    #include <stdlib.h>
+    #include <string.h>
+    #include <assert.h>
+
+    #include <getopt.h>             /* getopt_long() */
+
+    #include <fcntl.h>              /* low-level i/o */
+    #include <unistd.h>
+    #include <errno.h>
+    #include <sys/stat.h>
+    #include <sys/types.h>
+    #include <sys/time.h>
+    #include <sys/mman.h>
+    #include <sys/ioctl.h>
+
+    #include <linux/videodev2.h>
+
+    #define CLEAR(x) memset(&(x), 0, sizeof(x))
+
+    enum io_method {
+	    IO_METHOD_READ,
+	    IO_METHOD_MMAP,
+	    IO_METHOD_USERPTR,
+    };
+
+    struct buffer {
+	    void   *start;
+	    size_t  length;
+    };
+
+    static char            *dev_name;
+    static enum io_method   io = IO_METHOD_MMAP;
+    static int              fd = -1;
+    struct buffer          *buffers;
+    static unsigned int     n_buffers;
+    static int              out_buf;
+    static int              force_format;
+    static int              frame_count = 70;
+
+    static void errno_exit(const char *s)
+    {
+	    fprintf(stderr, "%s error %d, %s\\n", s, errno, strerror(errno));
+	    exit(EXIT_FAILURE);
+    }
+
+    static int xioctl(int fh, int request, void *arg)
+    {
+	    int r;
+
+	    do {
+		    r = ioctl(fh, request, arg);
+	    } while (-1 == r && EINTR == errno);
+
+	    return r;
+    }
+
+    static void process_image(const void *p, int size)
+    {
+	    if (out_buf)
+		    fwrite(p, size, 1, stdout);
+
+	    fflush(stderr);
+	    fprintf(stderr, ".");
+	    fflush(stdout);
+    }
+
+    static int read_frame(void)
+    {
+	    struct v4l2_buffer buf;
+	    unsigned int i;
+
+	    switch (io) {
+	    case IO_METHOD_READ:
+		    if (-1 == read(fd, buffers[0].start, buffers[0].length)) {
+			    switch (errno) {
+			    case EAGAIN:
+				    return 0;
+
+			    case EIO:
+				    /* Could ignore EIO, see spec. */
+
+				    /* fall through */
+
+			    default:
+				    errno_exit("read");
+			    }
+		    }
+
+		    process_image(buffers[0].start, buffers[0].length);
+		    break;
+
+	    case IO_METHOD_MMAP:
+		    CLEAR(buf);
+
+		    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    buf.memory = V4L2_MEMORY_MMAP;
+
+		    if (-1 == xioctl(fd, VIDIOC_DQBUF, &buf)) {
+			    switch (errno) {
+			    case EAGAIN:
+				    return 0;
+
+			    case EIO:
+				    /* Could ignore EIO, see spec. */
+
+				    /* fall through */
+
+			    default:
+				    errno_exit("VIDIOC_DQBUF");
+			    }
+		    }
+
+		    assert(buf.index < n_buffers);
+
+		    process_image(buffers[buf.index].start, buf.bytesused);
+
+		    if (-1 == xioctl(fd, VIDIOC_QBUF, &buf))
+			    errno_exit("VIDIOC_QBUF");
+		    break;
+
+	    case IO_METHOD_USERPTR:
+		    CLEAR(buf);
+
+		    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    buf.memory = V4L2_MEMORY_USERPTR;
+
+		    if (-1 == xioctl(fd, VIDIOC_DQBUF, &buf)) {
+			    switch (errno) {
+			    case EAGAIN:
+				    return 0;
+
+			    case EIO:
+				    /* Could ignore EIO, see spec. */
+
+				    /* fall through */
+
+			    default:
+				    errno_exit("VIDIOC_DQBUF");
+			    }
+		    }
+
+		    for (i = 0; i < n_buffers; ++i)
+			    if (buf.m.userptr == (unsigned long)buffers[i].start
+				&& buf.length == buffers[i].length)
+				    break;
+
+		    assert(i < n_buffers);
+
+		    process_image((void *)buf.m.userptr, buf.bytesused);
+
+		    if (-1 == xioctl(fd, VIDIOC_QBUF, &buf))
+			    errno_exit("VIDIOC_QBUF");
+		    break;
+	    }
+
+	    return 1;
+    }
+
+    static void mainloop(void)
+    {
+	    unsigned int count;
+
+	    count = frame_count;
+
+	    while (count-- > 0) {
+		    for (;;) {
+			    fd_set fds;
+			    struct timeval tv;
+			    int r;
+
+			    FD_ZERO(&fds);
+			    FD_SET(fd, &fds);
+
+			    /* Timeout. */
+			    tv.tv_sec = 2;
+			    tv.tv_usec = 0;
+
+			    r = select(fd + 1, &fds, NULL, NULL, &tv);
+
+			    if (-1 == r) {
+				    if (EINTR == errno)
+					    continue;
+				    errno_exit("select");
+			    }
+
+			    if (0 == r) {
+				    fprintf(stderr, "select timeout\\n");
+				    exit(EXIT_FAILURE);
+			    }
+
+			    if (read_frame())
+				    break;
+			    /* EAGAIN - continue select loop. */
+		    }
+	    }
+    }
+
+    static void stop_capturing(void)
+    {
+	    enum v4l2_buf_type type;
+
+	    switch (io) {
+	    case IO_METHOD_READ:
+		    /* Nothing to do. */
+		    break;
+
+	    case IO_METHOD_MMAP:
+	    case IO_METHOD_USERPTR:
+		    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    if (-1 == xioctl(fd, VIDIOC_STREAMOFF, &type))
+			    errno_exit("VIDIOC_STREAMOFF");
+		    break;
+	    }
+    }
+
+    static void start_capturing(void)
+    {
+	    unsigned int i;
+	    enum v4l2_buf_type type;
+
+	    switch (io) {
+	    case IO_METHOD_READ:
+		    /* Nothing to do. */
+		    break;
+
+	    case IO_METHOD_MMAP:
+		    for (i = 0; i < n_buffers; ++i) {
+			    struct v4l2_buffer buf;
+
+			    CLEAR(buf);
+			    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+			    buf.memory = V4L2_MEMORY_MMAP;
+			    buf.index = i;
+
+			    if (-1 == xioctl(fd, VIDIOC_QBUF, &buf))
+				    errno_exit("VIDIOC_QBUF");
+		    }
+		    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    if (-1 == xioctl(fd, VIDIOC_STREAMON, &type))
+			    errno_exit("VIDIOC_STREAMON");
+		    break;
+
+	    case IO_METHOD_USERPTR:
+		    for (i = 0; i < n_buffers; ++i) {
+			    struct v4l2_buffer buf;
+
+			    CLEAR(buf);
+			    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+			    buf.memory = V4L2_MEMORY_USERPTR;
+			    buf.index = i;
+			    buf.m.userptr = (unsigned long)buffers[i].start;
+			    buf.length = buffers[i].length;
+
+			    if (-1 == xioctl(fd, VIDIOC_QBUF, &buf))
+				    errno_exit("VIDIOC_QBUF");
+		    }
+		    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    if (-1 == xioctl(fd, VIDIOC_STREAMON, &type))
+			    errno_exit("VIDIOC_STREAMON");
+		    break;
+	    }
+    }
+
+    static void uninit_device(void)
+    {
+	    unsigned int i;
+
+	    switch (io) {
+	    case IO_METHOD_READ:
+		    free(buffers[0].start);
+		    break;
+
+	    case IO_METHOD_MMAP:
+		    for (i = 0; i < n_buffers; ++i)
+			    if (-1 == munmap(buffers[i].start, buffers[i].length))
+				    errno_exit("munmap");
+		    break;
+
+	    case IO_METHOD_USERPTR:
+		    for (i = 0; i < n_buffers; ++i)
+			    free(buffers[i].start);
+		    break;
+	    }
+
+	    free(buffers);
+    }
+
+    static void init_read(unsigned int buffer_size)
+    {
+	    buffers = calloc(1, sizeof(*buffers));
+
+	    if (!buffers) {
+		    fprintf(stderr, "Out of memory\\n");
+		    exit(EXIT_FAILURE);
+	    }
+
+	    buffers[0].length = buffer_size;
+	    buffers[0].start = malloc(buffer_size);
+
+	    if (!buffers[0].start) {
+		    fprintf(stderr, "Out of memory\\n");
+		    exit(EXIT_FAILURE);
+	    }
+    }
+
+    static void init_mmap(void)
+    {
+	    struct v4l2_requestbuffers req;
+
+	    CLEAR(req);
+
+	    req.count = 4;
+	    req.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	    req.memory = V4L2_MEMORY_MMAP;
+
+	    if (-1 == xioctl(fd, VIDIOC_REQBUFS, &req)) {
+		    if (EINVAL == errno) {
+			    fprintf(stderr, "%s does not support "
+				     "memory mappingn", dev_name);
+			    exit(EXIT_FAILURE);
+		    } else {
+			    errno_exit("VIDIOC_REQBUFS");
+		    }
+	    }
+
+	    if (req.count < 2) {
+		    fprintf(stderr, "Insufficient buffer memory on %s\\n",
+			     dev_name);
+		    exit(EXIT_FAILURE);
+	    }
+
+	    buffers = calloc(req.count, sizeof(*buffers));
+
+	    if (!buffers) {
+		    fprintf(stderr, "Out of memory\\n");
+		    exit(EXIT_FAILURE);
+	    }
+
+	    for (n_buffers = 0; n_buffers < req.count; ++n_buffers) {
+		    struct v4l2_buffer buf;
+
+		    CLEAR(buf);
+
+		    buf.type        = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    buf.memory      = V4L2_MEMORY_MMAP;
+		    buf.index       = n_buffers;
+
+		    if (-1 == xioctl(fd, VIDIOC_QUERYBUF, &buf))
+			    errno_exit("VIDIOC_QUERYBUF");
+
+		    buffers[n_buffers].length = buf.length;
+		    buffers[n_buffers].start =
+			    mmap(NULL /* start anywhere */,
+				  buf.length,
+				  PROT_READ | PROT_WRITE /* required */,
+				  MAP_SHARED /* recommended */,
+				  fd, buf.m.offset);
+
+		    if (MAP_FAILED == buffers[n_buffers].start)
+			    errno_exit("mmap");
+	    }
+    }
+
+    static void init_userp(unsigned int buffer_size)
+    {
+	    struct v4l2_requestbuffers req;
+
+	    CLEAR(req);
+
+	    req.count  = 4;
+	    req.type   = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	    req.memory = V4L2_MEMORY_USERPTR;
+
+	    if (-1 == xioctl(fd, VIDIOC_REQBUFS, &req)) {
+		    if (EINVAL == errno) {
+			    fprintf(stderr, "%s does not support "
+				     "user pointer i/on", dev_name);
+			    exit(EXIT_FAILURE);
+		    } else {
+			    errno_exit("VIDIOC_REQBUFS");
+		    }
+	    }
+
+	    buffers = calloc(4, sizeof(*buffers));
+
+	    if (!buffers) {
+		    fprintf(stderr, "Out of memory\\n");
+		    exit(EXIT_FAILURE);
+	    }
+
+	    for (n_buffers = 0; n_buffers < 4; ++n_buffers) {
+		    buffers[n_buffers].length = buffer_size;
+		    buffers[n_buffers].start = malloc(buffer_size);
+
+		    if (!buffers[n_buffers].start) {
+			    fprintf(stderr, "Out of memory\\n");
+			    exit(EXIT_FAILURE);
+		    }
+	    }
+    }
+
+    static void init_device(void)
+    {
+	    struct v4l2_capability cap;
+	    struct v4l2_cropcap cropcap;
+	    struct v4l2_crop crop;
+	    struct v4l2_format fmt;
+	    unsigned int min;
+
+	    if (-1 == xioctl(fd, VIDIOC_QUERYCAP, &cap)) {
+		    if (EINVAL == errno) {
+			    fprintf(stderr, "%s is no V4L2 device\\n",
+				     dev_name);
+			    exit(EXIT_FAILURE);
+		    } else {
+			    errno_exit("VIDIOC_QUERYCAP");
+		    }
+	    }
+
+	    if (!(cap.capabilities & V4L2_CAP_VIDEO_CAPTURE)) {
+		    fprintf(stderr, "%s is no video capture device\\n",
+			     dev_name);
+		    exit(EXIT_FAILURE);
+	    }
+
+	    switch (io) {
+	    case IO_METHOD_READ:
+		    if (!(cap.capabilities & V4L2_CAP_READWRITE)) {
+			    fprintf(stderr, "%s does not support read i/o\\n",
+				     dev_name);
+			    exit(EXIT_FAILURE);
+		    }
+		    break;
+
+	    case IO_METHOD_MMAP:
+	    case IO_METHOD_USERPTR:
+		    if (!(cap.capabilities & V4L2_CAP_STREAMING)) {
+			    fprintf(stderr, "%s does not support streaming i/o\\n",
+				     dev_name);
+			    exit(EXIT_FAILURE);
+		    }
+		    break;
+	    }
+
+
+	    /* Select video input, video standard and tune here. */
+
+
+	    CLEAR(cropcap);
+
+	    cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	    if (0 == xioctl(fd, VIDIOC_CROPCAP, &cropcap)) {
+		    crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    crop.c = cropcap.defrect; /* reset to default */
+
+		    if (-1 == xioctl(fd, VIDIOC_S_CROP, &crop)) {
+			    switch (errno) {
+			    case EINVAL:
+				    /* Cropping not supported. */
+				    break;
+			    default:
+				    /* Errors ignored. */
+				    break;
+			    }
+		    }
+	    } else {
+		    /* Errors ignored. */
+	    }
+
+
+	    CLEAR(fmt);
+
+	    fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	    if (force_format) {
+		    fmt.fmt.pix.width       = 640;
+		    fmt.fmt.pix.height      = 480;
+		    fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
+		    fmt.fmt.pix.field       = V4L2_FIELD_INTERLACED;
+
+		    if (-1 == xioctl(fd, VIDIOC_S_FMT, &fmt))
+			    errno_exit("VIDIOC_S_FMT");
+
+		    /* Note VIDIOC_S_FMT may change width and height. */
+	    } else {
+		    /* Preserve original settings as set by v4l2-ctl for example */
+		    if (-1 == xioctl(fd, VIDIOC_G_FMT, &fmt))
+			    errno_exit("VIDIOC_G_FMT");
+	    }
+
+	    /* Buggy driver paranoia. */
+	    min = fmt.fmt.pix.width * 2;
+	    if (fmt.fmt.pix.bytesperline < min)
+		    fmt.fmt.pix.bytesperline = min;
+	    min = fmt.fmt.pix.bytesperline * fmt.fmt.pix.height;
+	    if (fmt.fmt.pix.sizeimage < min)
+		    fmt.fmt.pix.sizeimage = min;
+
+	    switch (io) {
+	    case IO_METHOD_READ:
+		    init_read(fmt.fmt.pix.sizeimage);
+		    break;
+
+	    case IO_METHOD_MMAP:
+		    init_mmap();
+		    break;
+
+	    case IO_METHOD_USERPTR:
+		    init_userp(fmt.fmt.pix.sizeimage);
+		    break;
+	    }
+    }
+
+    static void close_device(void)
+    {
+	    if (-1 == close(fd))
+		    errno_exit("close");
+
+	    fd = -1;
+    }
+
+    static void open_device(void)
+    {
+	    struct stat st;
+
+	    if (-1 == stat(dev_name, &st)) {
+		    fprintf(stderr, "Cannot identify '%s': %d, %s\\n",
+			     dev_name, errno, strerror(errno));
+		    exit(EXIT_FAILURE);
+	    }
+
+	    if (!S_ISCHR(st.st_mode)) {
+		    fprintf(stderr, "%s is no devicen", dev_name);
+		    exit(EXIT_FAILURE);
+	    }
+
+	    fd = open(dev_name, O_RDWR /* required */ | O_NONBLOCK, 0);
+
+	    if (-1 == fd) {
+		    fprintf(stderr, "Cannot open '%s': %d, %s\\n",
+			     dev_name, errno, strerror(errno));
+		    exit(EXIT_FAILURE);
+	    }
+    }
+
+    static void usage(FILE *fp, int argc, char **argv)
+    {
+	    fprintf(fp,
+		     "Usage: %s [options]\\n\\n"
+		     "Version 1.3\\n"
+		     "Options:\\n"
+		     "-d | --device name   Video device name [%s]n"
+		     "-h | --help          Print this messagen"
+		     "-m | --mmap          Use memory mapped buffers [default]n"
+		     "-r | --read          Use read() callsn"
+		     "-u | --userp         Use application allocated buffersn"
+		     "-o | --output        Outputs stream to stdoutn"
+		     "-f | --format        Force format to 640x480 YUYVn"
+		     "-c | --count         Number of frames to grab [%i]n"
+		     "",
+		     argv[0], dev_name, frame_count);
+    }
+
+    static const char short_options[] = "d:hmruofc:";
+
+    static const struct option
+    long_options[] = {
+	    { "device", required_argument, NULL, 'd' },
+	    { "help",   no_argument,       NULL, 'h' },
+	    { "mmap",   no_argument,       NULL, 'm' },
+	    { "read",   no_argument,       NULL, 'r' },
+	    { "userp",  no_argument,       NULL, 'u' },
+	    { "output", no_argument,       NULL, 'o' },
+	    { "format", no_argument,       NULL, 'f' },
+	    { "count",  required_argument, NULL, 'c' },
+	    { 0, 0, 0, 0 }
+    };
+
+    int main(int argc, char **argv)
+    {
+	    dev_name = "/dev/video0";
+
+	    for (;;) {
+		    int idx;
+		    int c;
+
+		    c = getopt_long(argc, argv,
+				    short_options, long_options, &idx);
+
+		    if (-1 == c)
+			    break;
+
+		    switch (c) {
+		    case 0: /* getopt_long() flag */
+			    break;
+
+		    case 'd':
+			    dev_name = optarg;
+			    break;
+
+		    case 'h':
+			    usage(stdout, argc, argv);
+			    exit(EXIT_SUCCESS);
+
+		    case 'm':
+			    io = IO_METHOD_MMAP;
+			    break;
+
+		    case 'r':
+			    io = IO_METHOD_READ;
+			    break;
+
+		    case 'u':
+			    io = IO_METHOD_USERPTR;
+			    break;
+
+		    case 'o':
+			    out_buf++;
+			    break;
+
+		    case 'f':
+			    force_format++;
+			    break;
+
+		    case 'c':
+			    errno = 0;
+			    frame_count = strtol(optarg, NULL, 0);
+			    if (errno)
+				    errno_exit(optarg);
+			    break;
+
+		    default:
+			    usage(stderr, argc, argv);
+			    exit(EXIT_FAILURE);
+		    }
+	    }
+
+	    open_device();
+	    init_device();
+	    start_capturing();
+	    mainloop();
+	    stop_capturing();
+	    uninit_device();
+	    close_device();
+	    fprintf(stderr, "\\n");
+	    return 0;
+    }
diff --git a/Documentation/userspace-api/media/v4l/colorspaces-defs.rst b/Documentation/userspace-api/media/v4l/colorspaces-defs.rst
new file mode 100644
index 000000000000..01404e1f609a
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/colorspaces-defs.rst
@@ -0,0 +1,183 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+****************************
+Defining Colorspaces in V4L2
+****************************
+
+In V4L2 colorspaces are defined by four values. The first is the
+colorspace identifier (enum :c:type:`v4l2_colorspace`)
+which defines the chromaticities, the default transfer function, the
+default Y'CbCr encoding and the default quantization method. The second
+is the transfer function identifier (enum
+:c:type:`v4l2_xfer_func`) to specify non-standard
+transfer functions. The third is the Y'CbCr encoding identifier (enum
+:c:type:`v4l2_ycbcr_encoding`) to specify
+non-standard Y'CbCr encodings and the fourth is the quantization
+identifier (enum :c:type:`v4l2_quantization`) to
+specify non-standard quantization methods. Most of the time only the
+colorspace field of struct :c:type:`v4l2_pix_format`
+or struct :c:type:`v4l2_pix_format_mplane`
+needs to be filled in.
+
+.. _hsv-colorspace:
+
+On :ref:`HSV formats <hsv-formats>` the *Hue* is defined as the angle on
+the cylindrical color representation. Usually this angle is measured in
+degrees, i.e. 0-360. When we map this angle value into 8 bits, there are
+two basic ways to do it: Divide the angular value by 2 (0-179), or use the
+whole range, 0-255, dividing the angular value by 1.41. The enum
+:c:type:`v4l2_hsv_encoding` specifies which encoding is used.
+
+.. note:: The default R'G'B' quantization is full range for all
+   colorspaces except for BT.2020 which uses limited range R'G'B'
+   quantization.
+
+.. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
+
+.. c:type:: v4l2_colorspace
+
+.. flat-table:: V4L2 Colorspaces
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Identifier
+      - Details
+    * - ``V4L2_COLORSPACE_DEFAULT``
+      - The default colorspace. This can be used by applications to let
+	the driver fill in the colorspace.
+    * - ``V4L2_COLORSPACE_SMPTE170M``
+      - See :ref:`col-smpte-170m`.
+    * - ``V4L2_COLORSPACE_REC709``
+      - See :ref:`col-rec709`.
+    * - ``V4L2_COLORSPACE_SRGB``
+      - See :ref:`col-srgb`.
+    * - ``V4L2_COLORSPACE_OPRGB``
+      - See :ref:`col-oprgb`.
+    * - ``V4L2_COLORSPACE_BT2020``
+      - See :ref:`col-bt2020`.
+    * - ``V4L2_COLORSPACE_DCI_P3``
+      - See :ref:`col-dcip3`.
+    * - ``V4L2_COLORSPACE_SMPTE240M``
+      - See :ref:`col-smpte-240m`.
+    * - ``V4L2_COLORSPACE_470_SYSTEM_M``
+      - See :ref:`col-sysm`.
+    * - ``V4L2_COLORSPACE_470_SYSTEM_BG``
+      - See :ref:`col-sysbg`.
+    * - ``V4L2_COLORSPACE_JPEG``
+      - See :ref:`col-jpeg`.
+    * - ``V4L2_COLORSPACE_RAW``
+      - The raw colorspace. This is used for raw image capture where the
+	image is minimally processed and is using the internal colorspace
+	of the device. The software that processes an image using this
+	'colorspace' will have to know the internals of the capture
+	device.
+
+
+
+.. c:type:: v4l2_xfer_func
+
+.. tabularcolumns:: |p{5.5cm}|p{12.0cm}|
+
+.. flat-table:: V4L2 Transfer Function
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Identifier
+      - Details
+    * - ``V4L2_XFER_FUNC_DEFAULT``
+      - Use the default transfer function as defined by the colorspace.
+    * - ``V4L2_XFER_FUNC_709``
+      - Use the Rec. 709 transfer function.
+    * - ``V4L2_XFER_FUNC_SRGB``
+      - Use the sRGB transfer function.
+    * - ``V4L2_XFER_FUNC_OPRGB``
+      - Use the opRGB transfer function.
+    * - ``V4L2_XFER_FUNC_SMPTE240M``
+      - Use the SMPTE 240M transfer function.
+    * - ``V4L2_XFER_FUNC_NONE``
+      - Do not use a transfer function (i.e. use linear RGB values).
+    * - ``V4L2_XFER_FUNC_DCI_P3``
+      - Use the DCI-P3 transfer function.
+    * - ``V4L2_XFER_FUNC_SMPTE2084``
+      - Use the SMPTE 2084 transfer function. See :ref:`xf-smpte-2084`.
+
+
+
+.. c:type:: v4l2_ycbcr_encoding
+
+.. tabularcolumns:: |p{7.2cm}|p{10.3cm}|
+
+.. flat-table:: V4L2 Y'CbCr Encodings
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Identifier
+      - Details
+    * - ``V4L2_YCBCR_ENC_DEFAULT``
+      - Use the default Y'CbCr encoding as defined by the colorspace.
+    * - ``V4L2_YCBCR_ENC_601``
+      - Use the BT.601 Y'CbCr encoding.
+    * - ``V4L2_YCBCR_ENC_709``
+      - Use the Rec. 709 Y'CbCr encoding.
+    * - ``V4L2_YCBCR_ENC_XV601``
+      - Use the extended gamut xvYCC BT.601 encoding.
+    * - ``V4L2_YCBCR_ENC_XV709``
+      - Use the extended gamut xvYCC Rec. 709 encoding.
+    * - ``V4L2_YCBCR_ENC_BT2020``
+      - Use the default non-constant luminance BT.2020 Y'CbCr encoding.
+    * - ``V4L2_YCBCR_ENC_BT2020_CONST_LUM``
+      - Use the constant luminance BT.2020 Yc'CbcCrc encoding.
+    * - ``V4L2_YCBCR_ENC_SMPTE_240M``
+      - Use the SMPTE 240M Y'CbCr encoding.
+
+
+
+.. c:type:: v4l2_hsv_encoding
+
+.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
+
+.. flat-table:: V4L2 HSV Encodings
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Identifier
+      - Details
+    * - ``V4L2_HSV_ENC_180``
+      - For the Hue, each LSB is two degrees.
+    * - ``V4L2_HSV_ENC_256``
+      - For the Hue, the 360 degrees are mapped into 8 bits, i.e. each
+	LSB is roughly 1.41 degrees.
+
+
+
+.. c:type:: v4l2_quantization
+
+.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
+
+.. flat-table:: V4L2 Quantization Methods
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Identifier
+      - Details
+    * - ``V4L2_QUANTIZATION_DEFAULT``
+      - Use the default quantization encoding as defined by the
+	colorspace. This is always full range for R'G'B' (except for the
+	BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr.
+    * - ``V4L2_QUANTIZATION_FULL_RANGE``
+      - Use the full range quantization encoding. I.e. the range [0…1] is
+	mapped to [0…255] (with possible clipping to [1…254] to avoid the
+	0x00 and 0xff values). Cb and Cr are mapped from [-0.5…0.5] to
+	[0…255] (with possible clipping to [1…254] to avoid the 0x00 and
+	0xff values).
+    * - ``V4L2_QUANTIZATION_LIM_RANGE``
+      - Use the limited range quantization encoding. I.e. the range [0…1]
+	is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to
+	[16…240].
diff --git a/Documentation/userspace-api/media/v4l/colorspaces-details.rst b/Documentation/userspace-api/media/v4l/colorspaces-details.rst
new file mode 100644
index 000000000000..79ed6f4f76eb
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/colorspaces-details.rst
@@ -0,0 +1,813 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+********************************
+Detailed Colorspace Descriptions
+********************************
+
+
+.. _col-smpte-170m:
+
+Colorspace SMPTE 170M (V4L2_COLORSPACE_SMPTE170M)
+=================================================
+
+The :ref:`smpte170m` standard defines the colorspace used by NTSC and
+PAL and by SDTV in general. The default transfer function is
+``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
+``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited
+range. The chromaticities of the primary colors and the white reference
+are:
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: SMPTE 170M Chromaticities
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Color
+      - x
+      - y
+    * - Red
+      - 0.630
+      - 0.340
+    * - Green
+      - 0.310
+      - 0.595
+    * - Blue
+      - 0.155
+      - 0.070
+    * - White Reference (D65)
+      - 0.3127
+      - 0.3290
+
+
+The red, green and blue chromaticities are also often referred to as the
+SMPTE C set, so this colorspace is sometimes called SMPTE C as well.
+
+The transfer function defined for SMPTE 170M is the same as the one
+defined in Rec. 709.
+
+.. math::
+
+    L' = -1.099(-L)^{0.45} + 0.099 \text{, for } L \le-0.018
+
+    L' = 4.5L \text{, for } -0.018 < L < 0.018
+
+    L' = 1.099L^{0.45} - 0.099 \text{, for } L \ge 0.018
+
+Inverse Transfer function:
+
+.. math::
+
+    L = -\left( \frac{L' - 0.099}{-1.099} \right) ^{\frac{1}{0.45}} \text{, for } L' \le -0.081
+
+    L = \frac{L'}{4.5} \text{, for } -0.081 < L' < 0.081
+
+    L = \left(\frac{L' + 0.099}{1.099}\right)^{\frac{1}{0.45} } \text{, for } L' \ge 0.081
+
+The luminance (Y') and color difference (Cb and Cr) are obtained with
+the following ``V4L2_YCBCR_ENC_601`` encoding:
+
+.. math::
+
+    Y' = 0.2990R' + 0.5870G' + 0.1140B'
+
+    Cb = -0.1687R' - 0.3313G' + 0.5B'
+
+    Cr = 0.5R' - 0.4187G' - 0.0813B'
+
+Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
+[-0.5…0.5]. This conversion to Y'CbCr is identical to the one defined in
+the :ref:`itu601` standard and this colorspace is sometimes called
+BT.601 as well, even though BT.601 does not mention any color primaries.
+
+The default quantization is limited range, but full range is possible
+although rarely seen.
+
+
+.. _col-rec709:
+
+Colorspace Rec. 709 (V4L2_COLORSPACE_REC709)
+============================================
+
+The :ref:`itu709` standard defines the colorspace used by HDTV in
+general. The default transfer function is ``V4L2_XFER_FUNC_709``. The
+default Y'CbCr encoding is ``V4L2_YCBCR_ENC_709``. The default Y'CbCr
+quantization is limited range. The chromaticities of the primary colors
+and the white reference are:
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: Rec. 709 Chromaticities
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Color
+      - x
+      - y
+    * - Red
+      - 0.640
+      - 0.330
+    * - Green
+      - 0.300
+      - 0.600
+    * - Blue
+      - 0.150
+      - 0.060
+    * - White Reference (D65)
+      - 0.3127
+      - 0.3290
+
+
+The full name of this standard is Rec. ITU-R BT.709-5.
+
+Transfer function. Normally L is in the range [0…1], but for the
+extended gamut xvYCC encoding values outside that range are allowed.
+
+.. math::
+
+    L' = -1.099(-L)^{0.45} + 0.099 \text{, for } L \le -0.018
+
+    L' = 4.5L \text{, for } -0.018 < L < 0.018
+
+    L' = 1.099L^{0.45} - 0.099 \text{, for } L \ge 0.018
+
+Inverse Transfer function:
+
+.. math::
+
+    L = -\left( \frac{L' - 0.099}{-1.099} \right)^\frac{1}{0.45} \text{, for } L' \le -0.081
+
+    L = \frac{L'}{4.5}\text{, for } -0.081 < L' < 0.081
+
+    L = \left(\frac{L' + 0.099}{1.099}\right)^{\frac{1}{0.45} } \text{, for } L' \ge 0.081
+
+The luminance (Y') and color difference (Cb and Cr) are obtained with
+the following ``V4L2_YCBCR_ENC_709`` encoding:
+
+.. math::
+
+    Y' = 0.2126R' + 0.7152G' + 0.0722B'
+
+    Cb = -0.1146R' - 0.3854G' + 0.5B'
+
+    Cr = 0.5R' - 0.4542G' - 0.0458B'
+
+Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
+[-0.5…0.5].
+
+The default quantization is limited range, but full range is possible
+although rarely seen.
+
+The ``V4L2_YCBCR_ENC_709`` encoding described above is the default for
+this colorspace, but it can be overridden with ``V4L2_YCBCR_ENC_601``,
+in which case the BT.601 Y'CbCr encoding is used.
+
+Two additional extended gamut Y'CbCr encodings are also possible with
+this colorspace:
+
+The xvYCC 709 encoding (``V4L2_YCBCR_ENC_XV709``, :ref:`xvycc`) is
+similar to the Rec. 709 encoding, but it allows for R', G' and B' values
+that are outside the range [0…1]. The resulting Y', Cb and Cr values are
+scaled and offset according to the limited range formula:
+
+.. math::
+
+    Y' = \frac{219}{256} * (0.2126R' + 0.7152G' + 0.0722B') + \frac{16}{256}
+
+    Cb = \frac{224}{256} * (-0.1146R' - 0.3854G' + 0.5B')
+
+    Cr = \frac{224}{256} * (0.5R' - 0.4542G' - 0.0458B')
+
+The xvYCC 601 encoding (``V4L2_YCBCR_ENC_XV601``, :ref:`xvycc`) is
+similar to the BT.601 encoding, but it allows for R', G' and B' values
+that are outside the range [0…1]. The resulting Y', Cb and Cr values are
+scaled and offset according to the limited range formula:
+
+.. math::
+
+    Y' = \frac{219}{256} * (0.2990R' + 0.5870G' + 0.1140B') + \frac{16}{256}
+
+    Cb = \frac{224}{256} * (-0.1687R' - 0.3313G' + 0.5B')
+
+    Cr = \frac{224}{256} * (0.5R' - 0.4187G' - 0.0813B')
+
+Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
+[-0.5…0.5] and quantized without further scaling or offsets.
+The non-standard xvYCC 709 or xvYCC 601 encodings can be
+used by selecting ``V4L2_YCBCR_ENC_XV709`` or ``V4L2_YCBCR_ENC_XV601``.
+As seen by the xvYCC formulas these encodings always use limited range quantization,
+there is no full range variant. The whole point of these extended gamut encodings
+is that values outside the limited range are still valid, although they
+map to R', G' and B' values outside the [0…1] range and are therefore outside
+the Rec. 709 colorspace gamut.
+
+
+.. _col-srgb:
+
+Colorspace sRGB (V4L2_COLORSPACE_SRGB)
+======================================
+
+The :ref:`srgb` standard defines the colorspace used by most webcams
+and computer graphics. The default transfer function is
+``V4L2_XFER_FUNC_SRGB``. The default Y'CbCr encoding is
+``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited range.
+
+Note that the :ref:`sycc` standard specifies full range quantization,
+however all current capture hardware supported by the kernel convert
+R'G'B' to limited range Y'CbCr. So choosing full range as the default
+would break how applications interpret the quantization range.
+
+The chromaticities of the primary colors and the white reference are:
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: sRGB Chromaticities
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Color
+      - x
+      - y
+    * - Red
+      - 0.640
+      - 0.330
+    * - Green
+      - 0.300
+      - 0.600
+    * - Blue
+      - 0.150
+      - 0.060
+    * - White Reference (D65)
+      - 0.3127
+      - 0.3290
+
+
+These chromaticities are identical to the Rec. 709 colorspace.
+
+Transfer function. Note that negative values for L are only used by the
+Y'CbCr conversion.
+
+.. math::
+
+    L' = -1.055(-L)^{\frac{1}{2.4} } + 0.055\text{, for }L < -0.0031308
+
+    L' = 12.92L\text{, for }-0.0031308 \le L \le 0.0031308
+
+    L' = 1.055L ^{\frac{1}{2.4} } - 0.055\text{, for }0.0031308 < L \le 1
+
+Inverse Transfer function:
+
+.. math::
+
+    L = -((-L' + 0.055) / 1.055) ^{2.4}\text{, for }L' < -0.04045
+
+    L = L' / 12.92\text{, for }-0.04045 \le L' \le 0.04045
+
+    L = ((L' + 0.055) / 1.055) ^{2.4}\text{, for }L' > 0.04045
+
+The luminance (Y') and color difference (Cb and Cr) are obtained with
+the following ``V4L2_YCBCR_ENC_601`` encoding as defined by :ref:`sycc`:
+
+.. math::
+
+    Y' = 0.2990R' + 0.5870G' + 0.1140B'
+
+    Cb = -0.1687R' - 0.3313G' + 0.5B'
+
+    Cr = 0.5R' - 0.4187G' - 0.0813B'
+
+Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
+[-0.5…0.5]. This transform is identical to one defined in SMPTE
+170M/BT.601. The Y'CbCr quantization is limited range.
+
+
+.. _col-oprgb:
+
+Colorspace opRGB (V4L2_COLORSPACE_OPRGB)
+===============================================
+
+The :ref:`oprgb` standard defines the colorspace used by computer
+graphics that use the opRGB colorspace. The default transfer function is
+``V4L2_XFER_FUNC_OPRGB``. The default Y'CbCr encoding is
+``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited
+range.
+
+Note that the :ref:`oprgb` standard specifies full range quantization,
+however all current capture hardware supported by the kernel convert
+R'G'B' to limited range Y'CbCr. So choosing full range as the default
+would break how applications interpret the quantization range.
+
+The chromaticities of the primary colors and the white reference are:
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: opRGB Chromaticities
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Color
+      - x
+      - y
+    * - Red
+      - 0.6400
+      - 0.3300
+    * - Green
+      - 0.2100
+      - 0.7100
+    * - Blue
+      - 0.1500
+      - 0.0600
+    * - White Reference (D65)
+      - 0.3127
+      - 0.3290
+
+
+
+Transfer function:
+
+.. math::
+
+    L' = L ^{\frac{1}{2.19921875}}
+
+Inverse Transfer function:
+
+.. math::
+
+    L = L'^{(2.19921875)}
+
+The luminance (Y') and color difference (Cb and Cr) are obtained with
+the following ``V4L2_YCBCR_ENC_601`` encoding:
+
+.. math::
+
+    Y' = 0.2990R' + 0.5870G' + 0.1140B'
+
+    Cb = -0.1687R' - 0.3313G' + 0.5B'
+
+    Cr = 0.5R' - 0.4187G' - 0.0813B'
+
+Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
+[-0.5…0.5]. This transform is identical to one defined in SMPTE
+170M/BT.601. The Y'CbCr quantization is limited range.
+
+
+.. _col-bt2020:
+
+Colorspace BT.2020 (V4L2_COLORSPACE_BT2020)
+===========================================
+
+The :ref:`itu2020` standard defines the colorspace used by Ultra-high
+definition television (UHDTV). The default transfer function is
+``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
+``V4L2_YCBCR_ENC_BT2020``. The default R'G'B' quantization is limited
+range (!), and so is the default Y'CbCr quantization. The chromaticities
+of the primary colors and the white reference are:
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: BT.2020 Chromaticities
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Color
+      - x
+      - y
+    * - Red
+      - 0.708
+      - 0.292
+    * - Green
+      - 0.170
+      - 0.797
+    * - Blue
+      - 0.131
+      - 0.046
+    * - White Reference (D65)
+      - 0.3127
+      - 0.3290
+
+
+
+Transfer function (same as Rec. 709):
+
+.. math::
+
+    L' = 4.5L\text{, for }0 \le L < 0.018
+
+    L' = 1.099L ^{0.45} - 0.099\text{, for } 0.018 \le L \le 1
+
+Inverse Transfer function:
+
+.. math::
+
+    L = L' / 4.5\text{, for } L' < 0.081
+
+    L = \left( \frac{L' + 0.099}{1.099}\right) ^{\frac{1}{0.45} }\text{, for } L' \ge 0.081
+
+Please note that while Rec. 709 is defined as the default transfer function
+by the :ref:`itu2020` standard, in practice this colorspace is often used
+with the :ref:`xf-smpte-2084`. In particular Ultra HD Blu-ray discs use
+this combination.
+
+The luminance (Y') and color difference (Cb and Cr) are obtained with
+the following ``V4L2_YCBCR_ENC_BT2020`` encoding:
+
+.. math::
+
+    Y' = 0.2627R' + 0.6780G' + 0.0593B'
+
+    Cb = -0.1396R' - 0.3604G' + 0.5B'
+
+    Cr = 0.5R' - 0.4598G' - 0.0402B'
+
+Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
+[-0.5…0.5]. The Y'CbCr quantization is limited range.
+
+There is also an alternate constant luminance R'G'B' to Yc'CbcCrc
+(``V4L2_YCBCR_ENC_BT2020_CONST_LUM``) encoding:
+
+Luma:
+
+.. math::
+    :nowrap:
+
+    \begin{align*}
+    Yc' = (0.2627R + 0.6780G + 0.0593B)'& \\
+    B' - Yc' \le 0:& \\
+        &Cbc = (B' - Yc') / 1.9404 \\
+    B' - Yc' > 0: & \\
+        &Cbc = (B' - Yc') / 1.5816 \\
+    R' - Yc' \le 0:& \\
+        &Crc = (R' - Y') / 1.7184 \\
+    R' - Yc' > 0:& \\
+        &Crc = (R' - Y') / 0.9936
+    \end{align*}
+
+Yc' is clamped to the range [0…1] and Cbc and Crc are clamped to the
+range [-0.5…0.5]. The Yc'CbcCrc quantization is limited range.
+
+
+.. _col-dcip3:
+
+Colorspace DCI-P3 (V4L2_COLORSPACE_DCI_P3)
+==========================================
+
+The :ref:`smpte431` standard defines the colorspace used by cinema
+projectors that use the DCI-P3 colorspace. The default transfer function
+is ``V4L2_XFER_FUNC_DCI_P3``. The default Y'CbCr encoding is
+``V4L2_YCBCR_ENC_709``. The default Y'CbCr quantization is limited range.
+
+.. note::
+
+   Note that this colorspace standard does not specify a
+   Y'CbCr encoding since it is not meant to be encoded to Y'CbCr. So this
+   default Y'CbCr encoding was picked because it is the HDTV encoding.
+
+The chromaticities of the primary colors and the white reference are:
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: DCI-P3 Chromaticities
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Color
+      - x
+      - y
+    * - Red
+      - 0.6800
+      - 0.3200
+    * - Green
+      - 0.2650
+      - 0.6900
+    * - Blue
+      - 0.1500
+      - 0.0600
+    * - White Reference
+      - 0.3140
+      - 0.3510
+
+
+
+Transfer function:
+
+.. math::
+
+    L' = L^{\frac{1}{2.6}}
+
+Inverse Transfer function:
+
+.. math::
+
+    L = L'^{(2.6)}
+
+Y'CbCr encoding is not specified. V4L2 defaults to Rec. 709.
+
+
+.. _col-smpte-240m:
+
+Colorspace SMPTE 240M (V4L2_COLORSPACE_SMPTE240M)
+=================================================
+
+The :ref:`smpte240m` standard was an interim standard used during the
+early days of HDTV (1988-1998). It has been superseded by Rec. 709. The
+default transfer function is ``V4L2_XFER_FUNC_SMPTE240M``. The default
+Y'CbCr encoding is ``V4L2_YCBCR_ENC_SMPTE240M``. The default Y'CbCr
+quantization is limited range. The chromaticities of the primary colors
+and the white reference are:
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: SMPTE 240M Chromaticities
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Color
+      - x
+      - y
+    * - Red
+      - 0.630
+      - 0.340
+    * - Green
+      - 0.310
+      - 0.595
+    * - Blue
+      - 0.155
+      - 0.070
+    * - White Reference (D65)
+      - 0.3127
+      - 0.3290
+
+
+These chromaticities are identical to the SMPTE 170M colorspace.
+
+Transfer function:
+
+.. math::
+
+    L' = 4L\text{, for } 0 \le L < 0.0228
+
+    L' = 1.1115L ^{0.45} - 0.1115\text{, for } 0.0228 \le L \le 1
+
+Inverse Transfer function:
+
+.. math::
+
+    L = \frac{L'}{4}\text{, for } 0 \le L' < 0.0913
+
+    L = \left( \frac{L' + 0.1115}{1.1115}\right) ^{\frac{1}{0.45} }\text{, for } L' \ge 0.0913
+
+The luminance (Y') and color difference (Cb and Cr) are obtained with
+the following ``V4L2_YCBCR_ENC_SMPTE240M`` encoding:
+
+.. math::
+
+    Y' = 0.2122R' + 0.7013G' + 0.0865B'
+
+    Cb = -0.1161R' - 0.3839G' + 0.5B'
+
+    Cr = 0.5R' - 0.4451G' - 0.0549B'
+
+Y' is clamped to the range [0…1] and Cb and Cr are clamped to the
+range [-0.5…0.5]. The Y'CbCr quantization is limited range.
+
+
+.. _col-sysm:
+
+Colorspace NTSC 1953 (V4L2_COLORSPACE_470_SYSTEM_M)
+===================================================
+
+This standard defines the colorspace used by NTSC in 1953. In practice
+this colorspace is obsolete and SMPTE 170M should be used instead. The
+default transfer function is ``V4L2_XFER_FUNC_709``. The default Y'CbCr
+encoding is ``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is
+limited range. The chromaticities of the primary colors and the white
+reference are:
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: NTSC 1953 Chromaticities
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Color
+      - x
+      - y
+    * - Red
+      - 0.67
+      - 0.33
+    * - Green
+      - 0.21
+      - 0.71
+    * - Blue
+      - 0.14
+      - 0.08
+    * - White Reference (C)
+      - 0.310
+      - 0.316
+
+
+.. note::
+
+   This colorspace uses Illuminant C instead of D65 as the white
+   reference. To correctly convert an image in this colorspace to another
+   that uses D65 you need to apply a chromatic adaptation algorithm such as
+   the Bradford method.
+
+The transfer function was never properly defined for NTSC 1953. The Rec.
+709 transfer function is recommended in the literature:
+
+.. math::
+
+    L' = 4.5L\text{, for } 0 \le L < 0.018
+
+    L' = 1.099L ^{0.45} - 0.099\text{, for } 0.018 \le L \le 1
+
+Inverse Transfer function:
+
+.. math::
+
+    L = \frac{L'}{4.5} \text{, for } L' < 0.081
+
+    L = \left( \frac{L' + 0.099}{1.099}\right) ^{\frac{1}{0.45} }\text{, for } L' \ge 0.081
+
+The luminance (Y') and color difference (Cb and Cr) are obtained with
+the following ``V4L2_YCBCR_ENC_601`` encoding:
+
+.. math::
+
+    Y' = 0.2990R' + 0.5870G' + 0.1140B'
+
+    Cb = -0.1687R' - 0.3313G' + 0.5B'
+
+    Cr = 0.5R' - 0.4187G' - 0.0813B'
+
+Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
+[-0.5…0.5]. The Y'CbCr quantization is limited range. This transform is
+identical to one defined in SMPTE 170M/BT.601.
+
+
+.. _col-sysbg:
+
+Colorspace EBU Tech. 3213 (V4L2_COLORSPACE_470_SYSTEM_BG)
+=========================================================
+
+The :ref:`tech3213` standard defines the colorspace used by PAL/SECAM
+in 1975. In practice this colorspace is obsolete and SMPTE 170M should
+be used instead. The default transfer function is
+``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
+``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited
+range. The chromaticities of the primary colors and the white reference
+are:
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: EBU Tech. 3213 Chromaticities
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Color
+      - x
+      - y
+    * - Red
+      - 0.64
+      - 0.33
+    * - Green
+      - 0.29
+      - 0.60
+    * - Blue
+      - 0.15
+      - 0.06
+    * - White Reference (D65)
+      - 0.3127
+      - 0.3290
+
+
+
+The transfer function was never properly defined for this colorspace.
+The Rec. 709 transfer function is recommended in the literature:
+
+.. math::
+
+    L' = 4.5L\text{, for } 0 \le L < 0.018
+
+    L' = 1.099L ^{0.45} - 0.099\text{, for } 0.018 \le L \le 1
+
+Inverse Transfer function:
+
+.. math::
+
+    L = \frac{L'}{4.5} \text{, for } L' < 0.081
+
+    L = \left(\frac{L' + 0.099}{1.099} \right) ^{\frac{1}{0.45} }\text{, for } L' \ge 0.081
+
+The luminance (Y') and color difference (Cb and Cr) are obtained with
+the following ``V4L2_YCBCR_ENC_601`` encoding:
+
+.. math::
+
+    Y' = 0.2990R' + 0.5870G' + 0.1140B'
+
+    Cb = -0.1687R' - 0.3313G' + 0.5B'
+
+    Cr = 0.5R' - 0.4187G' - 0.0813B'
+
+Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
+[-0.5…0.5]. The Y'CbCr quantization is limited range. This transform is
+identical to one defined in SMPTE 170M/BT.601.
+
+
+.. _col-jpeg:
+
+Colorspace JPEG (V4L2_COLORSPACE_JPEG)
+======================================
+
+This colorspace defines the colorspace used by most (Motion-)JPEG
+formats. The chromaticities of the primary colors and the white
+reference are identical to sRGB. The transfer function use is
+``V4L2_XFER_FUNC_SRGB``. The Y'CbCr encoding is ``V4L2_YCBCR_ENC_601``
+with full range quantization where Y' is scaled to [0…255] and Cb/Cr are
+scaled to [-128…128] and then clipped to [-128…127].
+
+.. note::
+
+   The JPEG standard does not actually store colorspace
+   information. So if something other than sRGB is used, then the driver
+   will have to set that information explicitly. Effectively
+   ``V4L2_COLORSPACE_JPEG`` can be considered to be an abbreviation for
+   ``V4L2_COLORSPACE_SRGB``, ``V4L2_YCBCR_ENC_601`` and
+   ``V4L2_QUANTIZATION_FULL_RANGE``.
+
+***************************************
+Detailed Transfer Function Descriptions
+***************************************
+
+.. _xf-smpte-2084:
+
+Transfer Function SMPTE 2084 (V4L2_XFER_FUNC_SMPTE2084)
+=======================================================
+
+The :ref:`smpte2084` standard defines the transfer function used by
+High Dynamic Range content.
+
+Constants:
+    m1 = (2610 / 4096) / 4
+
+    m2 = (2523 / 4096) * 128
+
+    c1 = 3424 / 4096
+
+    c2 = (2413 / 4096) * 32
+
+    c3 = (2392 / 4096) * 32
+
+Transfer function:
+    L' = ((c1 + c2 * L\ :sup:`m1`) / (1 + c3 * L\ :sup:`m1`))\ :sup:`m2`
+
+Inverse Transfer function:
+    L = (max(L':sup:`1/m2` - c1, 0) / (c2 - c3 *
+    L'\ :sup:`1/m2`))\ :sup:`1/m1`
+
+Take care when converting between this transfer function and non-HDR transfer
+functions: the linear RGB values [0…1] of HDR content map to a luminance range
+of 0 to 10000 cd/m\ :sup:`2` whereas the linear RGB values of non-HDR (aka
+Standard Dynamic Range or SDR) map to a luminance range of 0 to 100 cd/m\ :sup:`2`.
+
+To go from SDR to HDR you will have to divide L by 100 first. To go in the other
+direction you will have to multiply L by 100. Of course, this clamps all
+luminance values over 100 cd/m\ :sup:`2` to 100 cd/m\ :sup:`2`.
+
+There are better methods, see e.g. :ref:`colimg` for more in-depth information
+about this.
diff --git a/Documentation/userspace-api/media/v4l/colorspaces.rst b/Documentation/userspace-api/media/v4l/colorspaces.rst
new file mode 100644
index 000000000000..0846df9066c5
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/colorspaces.rst
@@ -0,0 +1,170 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _colorspaces:
+
+***********
+Colorspaces
+***********
+
+'Color' is a very complex concept and depends on physics, chemistry and
+biology. Just because you have three numbers that describe the 'red',
+'green' and 'blue' components of the color of a pixel does not mean that
+you can accurately display that color. A colorspace defines what it
+actually *means* to have an RGB value of e.g. (255, 0, 0). That is,
+which color should be reproduced on the screen in a perfectly calibrated
+environment.
+
+In order to do that we first need to have a good definition of color,
+i.e. some way to uniquely and unambiguously define a color so that
+someone else can reproduce it. Human color vision is trichromatic since
+the human eye has color receptors that are sensitive to three different
+wavelengths of light. Hence the need to use three numbers to describe
+color. Be glad you are not a mantis shrimp as those are sensitive to 12
+different wavelengths, so instead of RGB we would be using the
+ABCDEFGHIJKL colorspace...
+
+Color exists only in the eye and brain and is the result of how strongly
+color receptors are stimulated. This is based on the Spectral Power
+Distribution (SPD) which is a graph showing the intensity (radiant
+power) of the light at wavelengths covering the visible spectrum as it
+enters the eye. The science of colorimetry is about the relationship
+between the SPD and color as perceived by the human brain.
+
+Since the human eye has only three color receptors it is perfectly
+possible that different SPDs will result in the same stimulation of
+those receptors and are perceived as the same color, even though the SPD
+of the light is different.
+
+In the 1920s experiments were devised to determine the relationship
+between SPDs and the perceived color and that resulted in the CIE 1931
+standard that defines spectral weighting functions that model the
+perception of color. Specifically that standard defines functions that
+can take an SPD and calculate the stimulus for each color receptor.
+After some further mathematical transforms these stimuli are known as
+the *CIE XYZ tristimulus* values and these X, Y and Z values describe a
+color as perceived by a human unambiguously. These X, Y and Z values are
+all in the range [0…1].
+
+The Y value in the CIE XYZ colorspace corresponds to luminance. Often
+the CIE XYZ colorspace is transformed to the normalized CIE xyY
+colorspace:
+
+	x = X / (X + Y + Z)
+
+	y = Y / (X + Y + Z)
+
+The x and y values are the chromaticity coordinates and can be used to
+define a color without the luminance component Y. It is very confusing
+to have such similar names for these colorspaces. Just be aware that if
+colors are specified with lower case 'x' and 'y', then the CIE xyY
+colorspace is used. Upper case 'X' and 'Y' refer to the CIE XYZ
+colorspace. Also, y has nothing to do with luminance. Together x and y
+specify a color, and Y the luminance. That is really all you need to
+remember from a practical point of view. At the end of this section you
+will find reading resources that go into much more detail if you are
+interested.
+
+A monitor or TV will reproduce colors by emitting light at three
+different wavelengths, the combination of which will stimulate the color
+receptors in the eye and thus cause the perception of color.
+Historically these wavelengths were defined by the red, green and blue
+phosphors used in the displays. These *color primaries* are part of what
+defines a colorspace.
+
+Different display devices will have different primaries and some
+primaries are more suitable for some display technologies than others.
+This has resulted in a variety of colorspaces that are used for
+different display technologies or uses. To define a colorspace you need
+to define the three color primaries (these are typically defined as x, y
+chromaticity coordinates from the CIE xyY colorspace) but also the white
+reference: that is the color obtained when all three primaries are at
+maximum power. This determines the relative power or energy of the
+primaries. This is usually chosen to be close to daylight which has been
+defined as the CIE D65 Illuminant.
+
+To recapitulate: the CIE XYZ colorspace uniquely identifies colors.
+Other colorspaces are defined by three chromaticity coordinates defined
+in the CIE xyY colorspace. Based on those a 3x3 matrix can be
+constructed that transforms CIE XYZ colors to colors in the new
+colorspace.
+
+Both the CIE XYZ and the RGB colorspace that are derived from the
+specific chromaticity primaries are linear colorspaces. But neither the
+eye, nor display technology is linear. Doubling the values of all
+components in the linear colorspace will not be perceived as twice the
+intensity of the color. So each colorspace also defines a transfer
+function that takes a linear color component value and transforms it to
+the non-linear component value, which is a closer match to the
+non-linear performance of both the eye and displays. Linear component
+values are denoted RGB, non-linear are denoted as R'G'B'. In general
+colors used in graphics are all R'G'B', except in openGL which uses
+linear RGB. Special care should be taken when dealing with openGL to
+provide linear RGB colors or to use the built-in openGL support to apply
+the inverse transfer function.
+
+The final piece that defines a colorspace is a function that transforms
+non-linear R'G'B' to non-linear Y'CbCr. This function is determined by
+the so-called luma coefficients. There may be multiple possible Y'CbCr
+encodings allowed for the same colorspace. Many encodings of color
+prefer to use luma (Y') and chroma (CbCr) instead of R'G'B'. Since the
+human eye is more sensitive to differences in luminance than in color
+this encoding allows one to reduce the amount of color information
+compared to the luma data. Note that the luma (Y') is unrelated to the Y
+in the CIE XYZ colorspace. Also note that Y'CbCr is often called YCbCr
+or YUV even though these are strictly speaking wrong.
+
+Sometimes people confuse Y'CbCr as being a colorspace. This is not
+correct, it is just an encoding of an R'G'B' color into luma and chroma
+values. The underlying colorspace that is associated with the R'G'B'
+color is also associated with the Y'CbCr color.
+
+The final step is how the RGB, R'G'B' or Y'CbCr values are quantized.
+The CIE XYZ colorspace where X, Y and Z are in the range [0…1] describes
+all colors that humans can perceive, but the transform to another
+colorspace will produce colors that are outside the [0…1] range. Once
+clamped to the [0…1] range those colors can no longer be reproduced in
+that colorspace. This clamping is what reduces the extent or gamut of
+the colorspace. How the range of [0…1] is translated to integer values
+in the range of [0…255] (or higher, depending on the color depth) is
+called the quantization. This is *not* part of the colorspace
+definition. In practice RGB or R'G'B' values are full range, i.e. they
+use the full [0…255] range. Y'CbCr values on the other hand are limited
+range with Y' using [16…235] and Cb and Cr using [16…240].
+
+Unfortunately, in some cases limited range RGB is also used where the
+components use the range [16…235]. And full range Y'CbCr also exists
+using the [0…255] range.
+
+In order to correctly interpret a color you need to know the
+quantization range, whether it is R'G'B' or Y'CbCr, the used Y'CbCr
+encoding and the colorspace. From that information you can calculate the
+corresponding CIE XYZ color and map that again to whatever colorspace
+your display device uses.
+
+The colorspace definition itself consists of the three chromaticity
+primaries, the white reference chromaticity, a transfer function and the
+luma coefficients needed to transform R'G'B' to Y'CbCr. While some
+colorspace standards correctly define all four, quite often the
+colorspace standard only defines some, and you have to rely on other
+standards for the missing pieces. The fact that colorspaces are often a
+mix of different standards also led to very confusing naming conventions
+where the name of a standard was used to name a colorspace when in fact
+that standard was part of various other colorspaces as well.
+
+If you want to read more about colors and colorspaces, then the
+following resources are useful: :ref:`poynton` is a good practical
+book for video engineers, :ref:`colimg` has a much broader scope and
+describes many more aspects of color (physics, chemistry, biology,
+etc.). The
+`http://www.brucelindbloom.com <http://www.brucelindbloom.com>`__
+website is an excellent resource, especially with respect to the
+mathematics behind colorspace conversions. The wikipedia
+`CIE 1931 colorspace <http://en.wikipedia.org/wiki/CIE_1931_color_space#CIE_xy_chromaticity_diagram_and_the_CIE_xyY_color_space>`__
+article is also very useful.
diff --git a/Documentation/userspace-api/media/v4l/common-defs.rst b/Documentation/userspace-api/media/v4l/common-defs.rst
new file mode 100644
index 000000000000..370a1e364a51
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/common-defs.rst
@@ -0,0 +1,20 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _common-defs:
+
+******************************************************
+Common definitions for V4L2 and V4L2 subdev interfaces
+******************************************************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    selections-common
diff --git a/Documentation/userspace-api/media/v4l/common.rst b/Documentation/userspace-api/media/v4l/common.rst
new file mode 100644
index 000000000000..7d81c58a13cd
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/common.rst
@@ -0,0 +1,65 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _common:
+
+###################
+Common API Elements
+###################
+Programming a V4L2 device consists of these steps:
+
+-  Opening the device
+
+-  Changing device properties, selecting a video and audio input, video
+   standard, picture brightness a. o.
+
+-  Negotiating a data format
+
+-  Negotiating an input/output method
+
+-  The actual input/output loop
+
+-  Closing the device
+
+In practice most steps are optional and can be executed out of order. It
+depends on the V4L2 device type, you can read about the details in
+:ref:`devices`. In this chapter we will discuss the basic concepts
+applicable to all devices.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    open
+    querycap
+    app-pri
+    video
+    audio
+    tuner
+    standard
+    dv-timings
+    control
+    extended-controls
+    ext-ctrls-camera
+    ext-ctrls-flash
+    ext-ctrls-image-source
+    ext-ctrls-image-process
+    ext-ctrls-codec
+    ext-ctrls-jpeg
+    ext-ctrls-dv
+    ext-ctrls-rf-tuner
+    ext-ctrls-fm-tx
+    ext-ctrls-fm-rx
+    ext-ctrls-detect
+    fourcc
+    format
+    planar-apis
+    selection-api
+    crop
+    streaming-par
diff --git a/Documentation/userspace-api/media/v4l/compat.rst b/Documentation/userspace-api/media/v4l/compat.rst
new file mode 100644
index 000000000000..055286b86e9b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/compat.rst
@@ -0,0 +1,25 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _compat:
+
+*******
+Changes
+*******
+
+The following chapters document the evolution of the V4L2 API, errata or
+extensions. They are also intended to help application and driver
+writers to port or update their code.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    diff-v4l
+    hist-v4l2
diff --git a/Documentation/userspace-api/media/v4l/constraints.svg b/Documentation/userspace-api/media/v4l/constraints.svg
new file mode 100644
index 000000000000..1dfe51a9839d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/constraints.svg
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+    This file is dual-licensed: you can use it either under the terms
+    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+    dual licensing only applies to this file, and not this project as a
+    whole.
+
+    a) This file is free software; you can redistribute it and/or
+       modify it under the terms of the GNU General Public License as
+       published by the Free Software Foundation version 2 of
+       the License.
+
+       This file is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+       GNU General Public License for more details.
+
+    Or, alternatively,
+
+    b) Permission is granted to copy, distribute and/or modify this
+       document under the terms of the GNU Free Documentation License,
+       Version 1.1 or any later version published by the Free Software
+       Foundation, with no Invariant Sections, no Front-Cover Texts
+       and no Back-Cover Texts. A copy of the license is included at
+       Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg id="svg2" width="249.01mm" height="143.01mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 24900.998 14300.999" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata325"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4" class="ClipPathGroup"><marker id="marker6261" overflow="visible" orient="auto"><path id="path6263" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6125" overflow="visible"
+orient="auto"><path id="path6127" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6001" overflow="visible" orient="auto"><path id="path6003" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5693" overflow="visible" orient="auto"><path id="path5695" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5575" overflow="visible" orient="auto"><path id="path5577" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5469" overflow="visible"
+orient="auto"><path id="path5471" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5259" overflow="visible" orient="auto"><path id="path5261" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="Arrow2Mend" overflow="visible" orient="auto"><path id="path4241" transform="scale(-.6)" d="m8.7186 4.0337-10.926-4.0177 10.926-4.0177c-1.7455 2.3721-1.7354 5.6175-6e-7 8.0354z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-linejoin="round" stroke-width=".625"/></marker></defs><g id="g204" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id6"><rect id="rect207" class="BoundingBox" x="1350" y="3250" width="24901" height="14301"
+fill="none"/><path id="path209" d="m13800 17500h-12400v-14200h24800v14200h-12400z" fill="#fff"/><path id="path211" d="m13800 17500h-12400v-14200h24800v14200h-12400z" fill="none" stroke="#f00" stroke-linejoin="round" stroke-width="100"/><text id="text213" class="TextShape"><tspan id="tspan215" class="TextParagraph" font-family="sans-serif" font-size="846px" font-weight="400"><tspan id="tspan217" class="TextPosition" x="1652" y="17093" fill="#ff0000"><tspan id="tspan219"/><tspan id="tspan221">V4L2_SEL_FLAG_GE</tspan></tspan></tspan></text>
+</g></g><rect id="rect226" class="BoundingBox" x="3e3" y="2200" width="18101" height="10101" fill="none"/><path id="path228" d="m12050 12250h-9e3v-1e4h18000v1e4h-9e3z" fill="#fff"/><path id="path230" d="m12050 12250h-9e3v-1e4h18000v1e4h-9e3z" fill="none" stroke="#000" stroke-linejoin="round" stroke-width="100"/><text id="text232" class="TextShape" x="-1350" y="-3250"><tspan id="tspan234" class="TextParagraph" font-family="sans-serif" font-size="987px" font-weight="400"><tspan id="tspan236" class="TextPosition" x="3227" y="11503" fill="#000000"><tspan id="tspan238"/><tspan id="tspan240">ORIGINAL</tspan></tspan></tspan></text>
+<g id="g242" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id8"><rect id="rect245" class="BoundingBox" x="7050" y="7950" width="7901" height="5501" fill="none"/><path id="path247" d="m11000 13400h-3900v-5400h7800v5400h-3900z" fill="#fff"/><path id="path249" d="m11000 13400h-3900v-5400h7800v5400h-3900z" fill="none" stroke="#3465a4" stroke-linejoin="round" stroke-width="100"/><text id="text251" class="TextShape"><tspan id="tspan253" class="TextParagraph" font-family="sans-serif" font-size="776px" font-weight="400"><tspan id="tspan255" class="TextPosition" x="7228" y="10969"><tspan id="tspan257" fill="#000080">V4L2_SEL_FLAG_LE</tspan></tspan></tspan></text>
+</g></g><rect id="rect262" class="BoundingBox" x="13700" y="7100" width="7101" height="101" fill="none"/><path id="path264" d="m20750 7150h-7e3" fill="none" marker-end="url(#Arrow2Mend)" stroke="#000080" stroke-linejoin="round" stroke-width="99.991"/><rect id="rect269" class="BoundingBox" x="3400" y="7100" width="2101" height="101" fill="none"/><path id="path271" d="m3450 7150h2e3" fill="none" marker-end="url(#marker5575)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect276" class="BoundingBox" x="9800" y="2900" width="101" height="1501" fill="none"/><path id="path278" d="m9850 2950v1400" fill="none" marker-end="url(#marker5259)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect283" class="BoundingBox" x="9600" y="10600" width="101" height="1301" fill="none"/><path id="path285" d="m9650 11850v-1200" fill="none"
+marker-end="url(#marker5469)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect290" class="BoundingBox" x="450" y="6850" width="2051" height="601" fill="none"/><path id="path292" d="m2450 7150h-2000.9" fill="none" marker-end="url(#marker6125)" stroke="#f00" stroke-linejoin="round" stroke-width="132.48"/><rect id="rect299" class="BoundingBox" x="21600" y="6750" width="2651" height="601" fill="none"/><path id="path301" d="m21650 7050h2522.6" fill="none" marker-end="url(#marker6001)" stroke="#f00" stroke-linejoin="round" stroke-width="120.41"/><rect id="rect308" class="BoundingBox" x="9550" y="550" width="601" height="1451" fill="none"/><path id="path310" d="m9837 1950v-1453" fill="none" marker-end="url(#marker6261)" stroke="#f00" stroke-linejoin="round" stroke-width="164.04"/><rect id="rect317" class="BoundingBox" x="9350" y="12500" width="601" height="1451"
+fill="none"/><path id="path319" d="m9650 12550v1505.2" fill="none" marker-end="url(#marker5693)" stroke="#f00" stroke-linejoin="round" stroke-width="166.96"/></svg>
diff --git a/Documentation/userspace-api/media/v4l/control.rst b/Documentation/userspace-api/media/v4l/control.rst
new file mode 100644
index 000000000000..3e991c1f7a12
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/control.rst
@@ -0,0 +1,512 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _control:
+
+*************
+User Controls
+*************
+
+Devices typically have a number of user-settable controls such as
+brightness, saturation and so on, which would be presented to the user
+on a graphical user interface. But, different devices will have
+different controls available, and furthermore, the range of possible
+values, and the default value will vary from device to device. The
+control ioctls provide the information and a mechanism to create a nice
+user interface for these controls that will work correctly with any
+device.
+
+All controls are accessed using an ID value. V4L2 defines several IDs
+for specific purposes. Drivers can also implement their own custom
+controls using ``V4L2_CID_PRIVATE_BASE``  [#f1]_ and higher values. The
+pre-defined control IDs have the prefix ``V4L2_CID_``, and are listed in
+:ref:`control-id`. The ID is used when querying the attributes of a
+control, and when getting or setting the current value.
+
+Generally applications should present controls to the user without
+assumptions about their purpose. Each control comes with a name string
+the user is supposed to understand. When the purpose is non-intuitive
+the driver writer should provide a user manual, a user interface plug-in
+or a driver specific panel application. Predefined IDs were introduced
+to change a few controls programmatically, for example to mute a device
+during a channel switch.
+
+Drivers may enumerate different controls after switching the current
+video input or output, tuner or modulator, or audio input or output.
+Different in the sense of other bounds, another default and current
+value, step size or other menu items. A control with a certain *custom*
+ID can also change name and type.
+
+If a control is not applicable to the current configuration of the
+device (for example, it doesn't apply to the current video input)
+drivers set the ``V4L2_CTRL_FLAG_INACTIVE`` flag.
+
+Control values are stored globally, they do not change when switching
+except to stay within the reported bounds. They also do not change e. g.
+when the device is opened or closed, when the tuner radio frequency is
+changed or generally never without application request.
+
+V4L2 specifies an event mechanism to notify applications when controls
+change value (see
+:ref:`VIDIOC_SUBSCRIBE_EVENT`, event
+``V4L2_EVENT_CTRL``), panel applications might want to make use of that
+in order to always reflect the correct control value.
+
+All controls use machine endianness.
+
+
+.. _control-id:
+
+Control IDs
+===========
+
+``V4L2_CID_BASE``
+    First predefined ID, equal to ``V4L2_CID_BRIGHTNESS``.
+
+``V4L2_CID_USER_BASE``
+    Synonym of ``V4L2_CID_BASE``.
+
+``V4L2_CID_BRIGHTNESS`` ``(integer)``
+    Picture brightness, or more precisely, the black level.
+
+``V4L2_CID_CONTRAST`` ``(integer)``
+    Picture contrast or luma gain.
+
+``V4L2_CID_SATURATION`` ``(integer)``
+    Picture color saturation or chroma gain.
+
+``V4L2_CID_HUE`` ``(integer)``
+    Hue or color balance.
+
+``V4L2_CID_AUDIO_VOLUME`` ``(integer)``
+    Overall audio volume. Note some drivers also provide an OSS or ALSA
+    mixer interface.
+
+``V4L2_CID_AUDIO_BALANCE`` ``(integer)``
+    Audio stereo balance. Minimum corresponds to all the way left,
+    maximum to right.
+
+``V4L2_CID_AUDIO_BASS`` ``(integer)``
+    Audio bass adjustment.
+
+``V4L2_CID_AUDIO_TREBLE`` ``(integer)``
+    Audio treble adjustment.
+
+``V4L2_CID_AUDIO_MUTE`` ``(boolean)``
+    Mute audio, i. e. set the volume to zero, however without affecting
+    ``V4L2_CID_AUDIO_VOLUME``. Like ALSA drivers, V4L2 drivers must mute
+    at load time to avoid excessive noise. Actually the entire device
+    should be reset to a low power consumption state.
+
+``V4L2_CID_AUDIO_LOUDNESS`` ``(boolean)``
+    Loudness mode (bass boost).
+
+``V4L2_CID_BLACK_LEVEL`` ``(integer)``
+    Another name for brightness (not a synonym of
+    ``V4L2_CID_BRIGHTNESS``). This control is deprecated and should not
+    be used in new drivers and applications.
+
+``V4L2_CID_AUTO_WHITE_BALANCE`` ``(boolean)``
+    Automatic white balance (cameras).
+
+``V4L2_CID_DO_WHITE_BALANCE`` ``(button)``
+    This is an action control. When set (the value is ignored), the
+    device will do a white balance and then hold the current setting.
+    Contrast this with the boolean ``V4L2_CID_AUTO_WHITE_BALANCE``,
+    which, when activated, keeps adjusting the white balance.
+
+``V4L2_CID_RED_BALANCE`` ``(integer)``
+    Red chroma balance.
+
+``V4L2_CID_BLUE_BALANCE`` ``(integer)``
+    Blue chroma balance.
+
+``V4L2_CID_GAMMA`` ``(integer)``
+    Gamma adjust.
+
+``V4L2_CID_WHITENESS`` ``(integer)``
+    Whiteness for grey-scale devices. This is a synonym for
+    ``V4L2_CID_GAMMA``. This control is deprecated and should not be
+    used in new drivers and applications.
+
+``V4L2_CID_EXPOSURE`` ``(integer)``
+    Exposure (cameras). [Unit?]
+
+``V4L2_CID_AUTOGAIN`` ``(boolean)``
+    Automatic gain/exposure control.
+
+``V4L2_CID_GAIN`` ``(integer)``
+    Gain control.
+
+    Primarily used to control gain on e.g. TV tuners but also on
+    webcams. Most devices control only digital gain with this control
+    but on some this could include analogue gain as well. Devices that
+    recognise the difference between digital and analogue gain use
+    controls ``V4L2_CID_DIGITAL_GAIN`` and ``V4L2_CID_ANALOGUE_GAIN``.
+
+``V4L2_CID_HFLIP`` ``(boolean)``
+    Mirror the picture horizontally.
+
+``V4L2_CID_VFLIP`` ``(boolean)``
+    Mirror the picture vertically.
+
+.. _v4l2-power-line-frequency:
+
+``V4L2_CID_POWER_LINE_FREQUENCY`` ``(enum)``
+    Enables a power line frequency filter to avoid flicker. Possible
+    values for ``enum v4l2_power_line_frequency`` are:
+    ``V4L2_CID_POWER_LINE_FREQUENCY_DISABLED`` (0),
+    ``V4L2_CID_POWER_LINE_FREQUENCY_50HZ`` (1),
+    ``V4L2_CID_POWER_LINE_FREQUENCY_60HZ`` (2) and
+    ``V4L2_CID_POWER_LINE_FREQUENCY_AUTO`` (3).
+
+``V4L2_CID_HUE_AUTO`` ``(boolean)``
+    Enables automatic hue control by the device. The effect of setting
+    ``V4L2_CID_HUE`` while automatic hue control is enabled is
+    undefined, drivers should ignore such request.
+
+``V4L2_CID_WHITE_BALANCE_TEMPERATURE`` ``(integer)``
+    This control specifies the white balance settings as a color
+    temperature in Kelvin. A driver should have a minimum of 2800
+    (incandescent) to 6500 (daylight). For more information about color
+    temperature see
+    `Wikipedia <http://en.wikipedia.org/wiki/Color_temperature>`__.
+
+``V4L2_CID_SHARPNESS`` ``(integer)``
+    Adjusts the sharpness filters in a camera. The minimum value
+    disables the filters, higher values give a sharper picture.
+
+``V4L2_CID_BACKLIGHT_COMPENSATION`` ``(integer)``
+    Adjusts the backlight compensation in a camera. The minimum value
+    disables backlight compensation.
+
+``V4L2_CID_CHROMA_AGC`` ``(boolean)``
+    Chroma automatic gain control.
+
+``V4L2_CID_CHROMA_GAIN`` ``(integer)``
+    Adjusts the Chroma gain control (for use when chroma AGC is
+    disabled).
+
+``V4L2_CID_COLOR_KILLER`` ``(boolean)``
+    Enable the color killer (i. e. force a black & white image in case
+    of a weak video signal).
+
+.. _v4l2-colorfx:
+
+``V4L2_CID_COLORFX`` ``(enum)``
+    Selects a color effect. The following values are defined:
+
+
+
+.. tabularcolumns:: |p{5.5cm}|p{12cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 11 24
+
+    * - ``V4L2_COLORFX_NONE``
+      - Color effect is disabled.
+    * - ``V4L2_COLORFX_ANTIQUE``
+      - An aging (old photo) effect.
+    * - ``V4L2_COLORFX_ART_FREEZE``
+      - Frost color effect.
+    * - ``V4L2_COLORFX_AQUA``
+      - Water color, cool tone.
+    * - ``V4L2_COLORFX_BW``
+      - Black and white.
+    * - ``V4L2_COLORFX_EMBOSS``
+      - Emboss, the highlights and shadows replace light/dark boundaries
+	and low contrast areas are set to a gray background.
+    * - ``V4L2_COLORFX_GRASS_GREEN``
+      - Grass green.
+    * - ``V4L2_COLORFX_NEGATIVE``
+      - Negative.
+    * - ``V4L2_COLORFX_SEPIA``
+      - Sepia tone.
+    * - ``V4L2_COLORFX_SKETCH``
+      - Sketch.
+    * - ``V4L2_COLORFX_SKIN_WHITEN``
+      - Skin whiten.
+    * - ``V4L2_COLORFX_SKY_BLUE``
+      - Sky blue.
+    * - ``V4L2_COLORFX_SOLARIZATION``
+      - Solarization, the image is partially reversed in tone, only color
+	values above or below a certain threshold are inverted.
+    * - ``V4L2_COLORFX_SILHOUETTE``
+      - Silhouette (outline).
+    * - ``V4L2_COLORFX_VIVID``
+      - Vivid colors.
+    * - ``V4L2_COLORFX_SET_CBCR``
+      - The Cb and Cr chroma components are replaced by fixed coefficients
+	determined by ``V4L2_CID_COLORFX_CBCR`` control.
+
+
+
+``V4L2_CID_COLORFX_CBCR`` ``(integer)``
+    Determines the Cb and Cr coefficients for ``V4L2_COLORFX_SET_CBCR``
+    color effect. Bits [7:0] of the supplied 32 bit value are
+    interpreted as Cr component, bits [15:8] as Cb component and bits
+    [31:16] must be zero.
+
+``V4L2_CID_AUTOBRIGHTNESS`` ``(boolean)``
+    Enable Automatic Brightness.
+
+``V4L2_CID_ROTATE`` ``(integer)``
+    Rotates the image by specified angle. Common angles are 90, 270 and
+    180. Rotating the image to 90 and 270 will reverse the height and
+    width of the display window. It is necessary to set the new height
+    and width of the picture using the
+    :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl according to the
+    rotation angle selected.
+
+``V4L2_CID_BG_COLOR`` ``(integer)``
+    Sets the background color on the current output device. Background
+    color needs to be specified in the RGB24 format. The supplied 32 bit
+    value is interpreted as bits 0-7 Red color information, bits 8-15
+    Green color information, bits 16-23 Blue color information and bits
+    24-31 must be zero.
+
+``V4L2_CID_ILLUMINATORS_1 V4L2_CID_ILLUMINATORS_2`` ``(boolean)``
+    Switch on or off the illuminator 1 or 2 of the device (usually a
+    microscope).
+
+``V4L2_CID_MIN_BUFFERS_FOR_CAPTURE`` ``(integer)``
+    This is a read-only control that can be read by the application and
+    used as a hint to determine the number of CAPTURE buffers to pass to
+    REQBUFS. The value is the minimum number of CAPTURE buffers that is
+    necessary for hardware to work.
+
+``V4L2_CID_MIN_BUFFERS_FOR_OUTPUT`` ``(integer)``
+    This is a read-only control that can be read by the application and
+    used as a hint to determine the number of OUTPUT buffers to pass to
+    REQBUFS. The value is the minimum number of OUTPUT buffers that is
+    necessary for hardware to work.
+
+.. _v4l2-alpha-component:
+
+``V4L2_CID_ALPHA_COMPONENT`` ``(integer)``
+    Sets the alpha color component. When a capture device (or capture
+    queue of a mem-to-mem device) produces a frame format that includes
+    an alpha component (e.g.
+    :ref:`packed RGB image formats <pixfmt-rgb>`) and the alpha value
+    is not defined by the device or the mem-to-mem input data this
+    control lets you select the alpha component value of all pixels.
+    When an output device (or output queue of a mem-to-mem device)
+    consumes a frame format that doesn't include an alpha component and
+    the device supports alpha channel processing this control lets you
+    set the alpha component value of all pixels for further processing
+    in the device.
+
+``V4L2_CID_LASTP1``
+    End of the predefined control IDs (currently
+    ``V4L2_CID_ALPHA_COMPONENT`` + 1).
+
+``V4L2_CID_PRIVATE_BASE``
+    ID of the first custom (driver specific) control. Applications
+    depending on particular custom controls should check the driver name
+    and version, see :ref:`querycap`.
+
+Applications can enumerate the available controls with the
+:ref:`VIDIOC_QUERYCTRL` and
+:ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>` ioctls, get and set a
+control value with the :ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
+:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls. Drivers must implement
+``VIDIOC_QUERYCTRL``, ``VIDIOC_G_CTRL`` and ``VIDIOC_S_CTRL`` when the
+device has one or more controls, ``VIDIOC_QUERYMENU`` when it has one or
+more menu type controls.
+
+
+.. _enum_all_controls:
+
+Example: Enumerating all controls
+=================================
+
+.. code-block:: c
+
+    struct v4l2_queryctrl queryctrl;
+    struct v4l2_querymenu querymenu;
+
+    static void enumerate_menu(__u32 id)
+    {
+	printf("  Menu items:\\n");
+
+	memset(&querymenu, 0, sizeof(querymenu));
+	querymenu.id = id;
+
+	for (querymenu.index = queryctrl.minimum;
+	     querymenu.index <= queryctrl.maximum;
+	     querymenu.index++) {
+	    if (0 == ioctl(fd, VIDIOC_QUERYMENU, &querymenu)) {
+		printf("  %s\\n", querymenu.name);
+	    }
+	}
+    }
+
+    memset(&queryctrl, 0, sizeof(queryctrl));
+
+    queryctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL;
+    while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
+	if (!(queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)) {
+	    printf("Control %s\\n", queryctrl.name);
+
+	    if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
+	        enumerate_menu(queryctrl.id);
+        }
+
+	queryctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
+    }
+    if (errno != EINVAL) {
+	perror("VIDIOC_QUERYCTRL");
+	exit(EXIT_FAILURE);
+    }
+
+Example: Enumerating all controls including compound controls
+=============================================================
+
+.. code-block:: c
+
+    struct v4l2_query_ext_ctrl query_ext_ctrl;
+
+    memset(&query_ext_ctrl, 0, sizeof(query_ext_ctrl));
+
+    query_ext_ctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL | V4L2_CTRL_FLAG_NEXT_COMPOUND;
+    while (0 == ioctl(fd, VIDIOC_QUERY_EXT_CTRL, &query_ext_ctrl)) {
+	if (!(query_ext_ctrl.flags & V4L2_CTRL_FLAG_DISABLED)) {
+	    printf("Control %s\\n", query_ext_ctrl.name);
+
+	    if (query_ext_ctrl.type == V4L2_CTRL_TYPE_MENU)
+	        enumerate_menu(query_ext_ctrl.id);
+        }
+
+	query_ext_ctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL | V4L2_CTRL_FLAG_NEXT_COMPOUND;
+    }
+    if (errno != EINVAL) {
+	perror("VIDIOC_QUERY_EXT_CTRL");
+	exit(EXIT_FAILURE);
+    }
+
+Example: Enumerating all user controls (old style)
+==================================================
+
+.. code-block:: c
+
+
+    memset(&queryctrl, 0, sizeof(queryctrl));
+
+    for (queryctrl.id = V4L2_CID_BASE;
+	 queryctrl.id < V4L2_CID_LASTP1;
+	 queryctrl.id++) {
+	if (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
+	    if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)
+		continue;
+
+	    printf("Control %s\\n", queryctrl.name);
+
+	    if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
+		enumerate_menu(queryctrl.id);
+	} else {
+	    if (errno == EINVAL)
+		continue;
+
+	    perror("VIDIOC_QUERYCTRL");
+	    exit(EXIT_FAILURE);
+	}
+    }
+
+    for (queryctrl.id = V4L2_CID_PRIVATE_BASE;;
+	 queryctrl.id++) {
+	if (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
+	    if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)
+		continue;
+
+	    printf("Control %s\\n", queryctrl.name);
+
+	    if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
+		enumerate_menu(queryctrl.id);
+	} else {
+	    if (errno == EINVAL)
+		break;
+
+	    perror("VIDIOC_QUERYCTRL");
+	    exit(EXIT_FAILURE);
+	}
+    }
+
+
+Example: Changing controls
+==========================
+
+.. code-block:: c
+
+    struct v4l2_queryctrl queryctrl;
+    struct v4l2_control control;
+
+    memset(&queryctrl, 0, sizeof(queryctrl));
+    queryctrl.id = V4L2_CID_BRIGHTNESS;
+
+    if (-1 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
+	if (errno != EINVAL) {
+	    perror("VIDIOC_QUERYCTRL");
+	    exit(EXIT_FAILURE);
+	} else {
+	    printf("V4L2_CID_BRIGHTNESS is not supportedn");
+	}
+    } else if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) {
+	printf("V4L2_CID_BRIGHTNESS is not supportedn");
+    } else {
+	memset(&control, 0, sizeof (control));
+	control.id = V4L2_CID_BRIGHTNESS;
+	control.value = queryctrl.default_value;
+
+	if (-1 == ioctl(fd, VIDIOC_S_CTRL, &control)) {
+	    perror("VIDIOC_S_CTRL");
+	    exit(EXIT_FAILURE);
+	}
+    }
+
+    memset(&control, 0, sizeof(control));
+    control.id = V4L2_CID_CONTRAST;
+
+    if (0 == ioctl(fd, VIDIOC_G_CTRL, &control)) {
+	control.value += 1;
+
+	/* The driver may clamp the value or return ERANGE, ignored here */
+
+	if (-1 == ioctl(fd, VIDIOC_S_CTRL, &control)
+	    && errno != ERANGE) {
+	    perror("VIDIOC_S_CTRL");
+	    exit(EXIT_FAILURE);
+	}
+    /* Ignore if V4L2_CID_CONTRAST is unsupported */
+    } else if (errno != EINVAL) {
+	perror("VIDIOC_G_CTRL");
+	exit(EXIT_FAILURE);
+    }
+
+    control.id = V4L2_CID_AUDIO_MUTE;
+    control.value = 1; /* silence */
+
+    /* Errors ignored */
+    ioctl(fd, VIDIOC_S_CTRL, &control);
+
+.. [#f1]
+   The use of ``V4L2_CID_PRIVATE_BASE`` is problematic because different
+   drivers may use the same ``V4L2_CID_PRIVATE_BASE`` ID for different
+   controls. This makes it hard to programmatically set such controls
+   since the meaning of the control with that ID is driver dependent. In
+   order to resolve this drivers use unique IDs and the
+   ``V4L2_CID_PRIVATE_BASE`` IDs are mapped to those unique IDs by the
+   kernel. Consider these ``V4L2_CID_PRIVATE_BASE`` IDs as aliases to
+   the real IDs.
+
+   Many applications today still use the ``V4L2_CID_PRIVATE_BASE`` IDs
+   instead of using :ref:`VIDIOC_QUERYCTRL` with
+   the ``V4L2_CTRL_FLAG_NEXT_CTRL`` flag to enumerate all IDs, so
+   support for ``V4L2_CID_PRIVATE_BASE`` is still around.
diff --git a/Documentation/userspace-api/media/v4l/crop.rst b/Documentation/userspace-api/media/v4l/crop.rst
new file mode 100644
index 000000000000..cb7e2341aedf
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/crop.rst
@@ -0,0 +1,324 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _crop:
+
+*****************************************************
+Image Cropping, Insertion and Scaling -- the CROP API
+*****************************************************
+
+.. note::
+
+   The CROP API is mostly superseded by the newer :ref:`SELECTION API
+   <selection-api>`. The new API should be preferred in most cases,
+   with the exception of pixel aspect ratio detection, which is
+   implemented by :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` and has no
+   equivalent in the SELECTION API. See :ref:`selection-vs-crop` for a
+   comparison of the two APIs.
+
+Some video capture devices can sample a subsection of the picture and
+shrink or enlarge it to an image of arbitrary size. We call these
+abilities cropping and scaling. Some video output devices can scale an
+image up or down and insert it at an arbitrary scan line and horizontal
+offset into a video signal.
+
+Applications can use the following API to select an area in the video
+signal, query the default area and the hardware limits.
+
+.. note::
+
+   Despite their name, the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>`,
+   :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_S_CROP
+   <VIDIOC_G_CROP>` ioctls apply to input as well as output devices.
+
+Scaling requires a source and a target. On a video capture or overlay
+device the source is the video signal, and the cropping ioctls determine
+the area actually sampled. The target are images read by the application
+or overlaid onto the graphics screen. Their size (and position for an
+overlay) is negotiated with the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
+and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctls.
+
+On a video output device the source are the images passed in by the
+application, and their size is again negotiated with the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
+ioctls, or may be encoded in a compressed video stream. The target is
+the video signal, and the cropping ioctls determine the area where the
+images are inserted.
+
+Source and target rectangles are defined even if the device does not
+support scaling or the :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and
+:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` ioctls. Their size (and position
+where applicable) will be fixed in this case.
+
+.. note::
+
+   All capture and output devices that support the CROP or SELECTION
+   API will also support the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>`
+   ioctl.
+
+Cropping Structures
+===================
+
+
+.. _crop-scale:
+
+.. kernel-figure:: crop.svg
+    :alt:    crop.svg
+    :align:  center
+
+    Image Cropping, Insertion and Scaling
+
+    The cropping, insertion and scaling process
+
+
+
+For capture devices the coordinates of the top left corner, width and
+height of the area which can be sampled is given by the ``bounds``
+substructure of the struct :c:type:`v4l2_cropcap` returned
+by the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` ioctl. To support a wide
+range of hardware this specification does not define an origin or units.
+However by convention drivers should horizontally count unscaled samples
+relative to 0H (the leading edge of the horizontal sync pulse, see
+:ref:`vbi-hsync`). Vertically ITU-R line numbers of the first field
+(see ITU R-525 line numbering for :ref:`525 lines <vbi-525>` and for
+:ref:`625 lines <vbi-625>`), multiplied by two if the driver
+can capture both fields.
+
+The top left corner, width and height of the source rectangle, that is
+the area actually sampled, is given by struct
+:c:type:`v4l2_crop` using the same coordinate system as
+struct :c:type:`v4l2_cropcap`. Applications can use the
+:ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>`
+ioctls to get and set this rectangle. It must lie completely within the
+capture boundaries and the driver may further adjust the requested size
+and/or position according to hardware limitations.
+
+Each capture device has a default source rectangle, given by the
+``defrect`` substructure of struct
+:c:type:`v4l2_cropcap`. The center of this rectangle
+shall align with the center of the active picture area of the video
+signal, and cover what the driver writer considers the complete picture.
+Drivers shall reset the source rectangle to the default when the driver
+is first loaded, but not later.
+
+For output devices these structures and ioctls are used accordingly,
+defining the *target* rectangle where the images will be inserted into
+the video signal.
+
+
+Scaling Adjustments
+===================
+
+Video hardware can have various cropping, insertion and scaling
+limitations. It may only scale up or down, support only discrete scaling
+factors, or have different scaling abilities in horizontal and vertical
+direction. Also it may not support scaling at all. At the same time the
+struct :c:type:`v4l2_crop` rectangle may have to be aligned,
+and both the source and target rectangles may have arbitrary upper and
+lower size limits. In particular the maximum ``width`` and ``height`` in
+struct :c:type:`v4l2_crop` may be smaller than the struct
+:c:type:`v4l2_cropcap`. ``bounds`` area. Therefore, as
+usual, drivers are expected to adjust the requested parameters and
+return the actual values selected.
+
+Applications can change the source or the target rectangle first, as
+they may prefer a particular image size or a certain area in the video
+signal. If the driver has to adjust both to satisfy hardware
+limitations, the last requested rectangle shall take priority, and the
+driver should preferably adjust the opposite one. The
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl however shall not change
+the driver state and therefore only adjust the requested rectangle.
+
+Suppose scaling on a video capture device is restricted to a factor 1:1
+or 2:1 in either direction and the target image size must be a multiple
+of 16 × 16 pixels. The source cropping rectangle is set to defaults,
+which are also the upper limit in this example, of 640 × 400 pixels at
+offset 0, 0. An application requests an image size of 300 × 225 pixels,
+assuming video will be scaled down from the "full picture" accordingly.
+The driver sets the image size to the closest possible values 304 × 224,
+then chooses the cropping rectangle closest to the requested size, that
+is 608 × 224 (224 × 2:1 would exceed the limit 400). The offset 0, 0 is
+still valid, thus unmodified. Given the default cropping rectangle
+reported by :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` the application can
+easily propose another offset to center the cropping rectangle.
+
+Now the application may insist on covering an area using a picture
+aspect ratio closer to the original request, so it asks for a cropping
+rectangle of 608 × 456 pixels. The present scaling factors limit
+cropping to 640 × 384, so the driver returns the cropping size 608 × 384
+and adjusts the image size to closest possible 304 × 192.
+
+
+Examples
+========
+
+Source and target rectangles shall remain unchanged across closing and
+reopening a device, such that piping data into or out of a device will
+work without special preparations. More advanced applications should
+ensure the parameters are suitable before starting I/O.
+
+.. note::
+
+   On the next two examples, a video capture device is assumed;
+   change ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` for other types of device.
+
+Example: Resetting the cropping parameters
+==========================================
+
+.. code-block:: c
+
+    struct v4l2_cropcap cropcap;
+    struct v4l2_crop crop;
+
+    memset (&cropcap, 0, sizeof (cropcap));
+    cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+    if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
+	perror ("VIDIOC_CROPCAP");
+	exit (EXIT_FAILURE);
+    }
+
+    memset (&crop, 0, sizeof (crop));
+    crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+    crop.c = cropcap.defrect;
+
+    /* Ignore if cropping is not supported (EINVAL). */
+
+    if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
+	&& errno != EINVAL) {
+	perror ("VIDIOC_S_CROP");
+	exit (EXIT_FAILURE);
+    }
+
+
+Example: Simple downscaling
+===========================
+
+.. code-block:: c
+
+    struct v4l2_cropcap cropcap;
+    struct v4l2_format format;
+
+    reset_cropping_parameters ();
+
+    /* Scale down to 1/4 size of full picture. */
+
+    memset (&format, 0, sizeof (format)); /* defaults */
+
+    format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+    format.fmt.pix.width = cropcap.defrect.width >> 1;
+    format.fmt.pix.height = cropcap.defrect.height >> 1;
+    format.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
+
+    if (-1 == ioctl (fd, VIDIOC_S_FMT, &format)) {
+	perror ("VIDIOC_S_FORMAT");
+	exit (EXIT_FAILURE);
+    }
+
+    /* We could check the actual image size now, the actual scaling factor
+       or if the driver can scale at all. */
+
+Example: Selecting an output area
+=================================
+
+.. note:: This example assumes an output device.
+
+.. code-block:: c
+
+    struct v4l2_cropcap cropcap;
+    struct v4l2_crop crop;
+
+    memset (&cropcap, 0, sizeof (cropcap));
+    cropcap.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+
+    if (-1 == ioctl (fd, VIDIOC_CROPCAP;, &cropcap)) {
+	perror ("VIDIOC_CROPCAP");
+	exit (EXIT_FAILURE);
+    }
+
+    memset (&crop, 0, sizeof (crop));
+
+    crop.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+    crop.c = cropcap.defrect;
+
+    /* Scale the width and height to 50 % of their original size
+       and center the output. */
+
+    crop.c.width /= 2;
+    crop.c.height /= 2;
+    crop.c.left += crop.c.width / 2;
+    crop.c.top += crop.c.height / 2;
+
+    /* Ignore if cropping is not supported (EINVAL). */
+
+    if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
+	&& errno != EINVAL) {
+	perror ("VIDIOC_S_CROP");
+	exit (EXIT_FAILURE);
+    }
+
+Example: Current scaling factor and pixel aspect
+================================================
+
+.. note:: This example assumes a video capture device.
+
+.. code-block:: c
+
+    struct v4l2_cropcap cropcap;
+    struct v4l2_crop crop;
+    struct v4l2_format format;
+    double hscale, vscale;
+    double aspect;
+    int dwidth, dheight;
+
+    memset (&cropcap, 0, sizeof (cropcap));
+    cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+    if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
+	perror ("VIDIOC_CROPCAP");
+	exit (EXIT_FAILURE);
+    }
+
+    memset (&crop, 0, sizeof (crop));
+    crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+    if (-1 == ioctl (fd, VIDIOC_G_CROP, &crop)) {
+	if (errno != EINVAL) {
+	    perror ("VIDIOC_G_CROP");
+	    exit (EXIT_FAILURE);
+	}
+
+	/* Cropping not supported. */
+	crop.c = cropcap.defrect;
+    }
+
+    memset (&format, 0, sizeof (format));
+    format.fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+    if (-1 == ioctl (fd, VIDIOC_G_FMT, &format)) {
+	perror ("VIDIOC_G_FMT");
+	exit (EXIT_FAILURE);
+    }
+
+    /* The scaling applied by the driver. */
+
+    hscale = format.fmt.pix.width / (double) crop.c.width;
+    vscale = format.fmt.pix.height / (double) crop.c.height;
+
+    aspect = cropcap.pixelaspect.numerator /
+	 (double) cropcap.pixelaspect.denominator;
+    aspect = aspect * hscale / vscale;
+
+    /* Devices following ITU-R BT.601 do not capture
+       square pixels. For playback on a computer monitor
+       we should scale the images to this size. */
+
+    dwidth = format.fmt.pix.width / aspect;
+    dheight = format.fmt.pix.height;
diff --git a/Documentation/userspace-api/media/v4l/crop.svg b/Documentation/userspace-api/media/v4l/crop.svg
new file mode 100644
index 000000000000..4cd47f98e7c8
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/crop.svg
@@ -0,0 +1,290 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   xml:space="preserve"
+   width="208.59436mm"
+   height="95.859146mm"
+   viewBox="0 0 739.11388 339.6584"
+   sodipodi:docname="crop.svg"><metadata
+     id="metadata8"><rdf:RDF><cc:Work
+	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+     id="defs6"><clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath44"><path
+	 d="m 0,0 0,1895 4118,0 L 4118,0 0,0 Z m 3051.62,250.48 8.19,17.01 -46.93,23.31 29.61,-25.515 -38.12,8.505 47.25,-23.31 z m -1559.25,800.73 -8.5,-17.01 46.93,-23.31 -29.29,25.2 37.8,-8.19 -46.94,23.31 z"
+	 id="path46"
+	 inkscape:connector-curvature="0"
+	 style="clip-rule:evenodd" /></clipPath><clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath64"><path
+	 d="m 0,0 0,1895 4118,0 0,-1626 -1,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 -4,0 0,1 -5,0 0,1 -4,0 0,1 -5,0 0,1 -4,0 0,1 -4,0 0,1 -4,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 1,0 0,3 1,0 0,2 1,0 0,2 1,0 L 4118,0 0,0 Z m 4074,272 0,-1 1,0 0,1 -1,0 z m -1486,743 0,-1 1,0 0,1 -1,0 z m -2,1 0,-1 1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,1 -1,0 0,1
+-1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,2 2,0 0,-1 4,0 0,-1 5,0 0,-1 4,0 0,-1 5,0 0,-1 5,0 0,-1 4,0 0,-1 3,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -3,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 z"
+	 id="path66"
+	 inkscape:connector-curvature="0"
+	 style="clip-rule:evenodd" /></clipPath><clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath84"><path
+	 d="m 0,0 0,1895 4118,0 0,-136 -3,0 0,-1 -11,0 0,-1 -11,0 0,-1 -11,0 0,-1 -11,0 0,-1 5,0 0,-1 6,0 0,-1 7,0 0,-1 6,0 0,-1 6,0 0,-1 4,0 0,-1 -1,0 0,-1 -3,0 0,-1 -3,0 0,-1 -2,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 7,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 3,0 L 4118,0 0,0 Z m 2552,1599 0,-1 2,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 -4,0 0,1 -7,0 0,1 -6,0 0,1 -7,0 0,1 -6,0 0,1 -3,0 0,1 2,0 0,1 2,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 2,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 -7,0 0,-1 -12,0 0,-1 -11,0 0,-1 -11,0 0,-1 -4,0 0,-1 1,0 0,-12 1,0 0,-4 z"
+	 id="path86"
+	 inkscape:connector-curvature="0"
+	 style="clip-rule:evenodd" /></clipPath><clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath104"><path
+	 d="m 0,0 0,1895 4118,0 L 4118,0 0,0 Z m 3056.98,1740.43 -1.58,18.9 -52.6,-4.72 38.74,-6.3 -36.85,-12.6 52.29,4.72 z m -1570.28,-123.79 1.58,-18.9 52.6,4.72 -38.43,5.99 36.54,12.91 -52.29,-4.72 z"
+	 id="path106"
+	 inkscape:connector-curvature="0"
+	 style="clip-rule:evenodd" /></clipPath></defs><sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview4"
+     showgrid="false"
+     inkscape:zoom="0.99625351"
+     inkscape:cx="-73.227122"
+     inkscape:cy="114.17568"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="g10"
+     units="mm"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0" /><g
+     id="g10"
+     inkscape:groupmode="layer"
+     inkscape:label="crop"
+     transform="matrix(1.25,0,0,-1.25,-0.35237428,339.91141)"><path
+       d="m 411.08474,0.37218832 0,271.38551168 -37.17867,0 0,-1.94649 -205.3611,1.94649 0,-2.58046 -155.911966,0 0,-1.90192 17.977663,-264.3219406 -17.977663,0 0,-2.58119108 193.135216,0 0,2.58119108 -137.934309,0 0,264.3219406 333.650679,0 0,-264.3219406 -177.10547,0 0,-1.947197 149.52695,0 0,-0.63399408"
+       style="fill:#7f7f7f;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path16"
+       inkscape:connector-curvature="0" /><path
+       d="m 411.08474,0.37218832 0,271.38551168 -37.17867,0 0,-1.94649 -205.3611,1.94649 0,-2.58046 -155.911966,0 0,-1.90192 17.977663,-264.3219406 -17.977663,0 0,-2.58119108 193.135216,0 0,2.58119108 -137.934309,0 0,264.3219406 333.650679,0 0,-264.3219406 -177.10547,0 0,-1.947197 149.52695,0 0,-0.63399408 37.17867,0 z"
+       style="fill:none;stroke:#000000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path18"
+       inkscape:connector-curvature="0" /><path
+       d="m 40.256106,6.8024838 366.979524,0 0,253.4078762 -366.979524,0 0,-253.4078762 z"
+       style="fill:none;stroke:#ff0000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path20"
+       inkscape:connector-curvature="0" /><path
+       d="m 77.434066,7.4364707 316.352284,0 0,244.4416893 -316.352284,0 0,-244.4416893 z"
+       style="fill:none;stroke:#0000ff;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path22"
+       inkscape:connector-curvature="0" /><path
+       d="m 214.41669,149.49157 152.83195,0 0,81.51075 -152.83195,0 0,-81.51075 z"
+       style="fill:none;stroke:#00b000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path24"
+       inkscape:connector-curvature="0" /><path
+       d="m 438.57126,37.414285 152.83194,0 0,213.966445 -152.83194,0 0,-213.966445 z"
+       style="fill:none;stroke:#d100d1;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path26"
+       inkscape:connector-curvature="0" /><path
+       d="m 0.45168907,271.7577 168.09328093,0 0,-2.58046 -155.911966,0 0,-1.90192 17.977663,0 0,-264.3219406 -17.977663,0 0,-2.58119108 -12.18131493,0"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path28"
+       inkscape:connector-curvature="0" /><path
+       d="m 0.45168907,271.7577 168.09328093,0 0,-2.58046 -155.911966,0 0,-1.90192 17.977663,0 0,-264.3219406 -17.977663,0 0,-2.58119108 -12.18131493,0 0,271.38551168 z"
+       style="fill:none;stroke:#000000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path30"
+       inkscape:connector-curvature="0" /><path
+       d="m 373.90607,0.37218832 0,0.63399408 -149.52695,0 0,1.947197 -18.6109,0 0,-2.58119108"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path32"
+       inkscape:connector-curvature="0" /><path
+       d="m 373.90607,0.37218832 0,0.63399408 -149.52695,0 0,1.947197 -18.6109,0 0,-2.58119108 168.13785,0 z"
+       style="fill:none;stroke:#000000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path34"
+       inkscape:connector-curvature="0" /><path
+       d="m 205.76822,271.7577 168.13785,0 0,-1.94649 -149.52695,0 0,-2.53589 -18.6109,0"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path36"
+       inkscape:connector-curvature="0" /><path
+       d="m 205.76822,271.7577 168.13785,0 0,-1.94649 -149.52695,0 0,-2.53589 -18.6109,0 0,4.48238 z"
+       style="fill:none;stroke:#000000;stroke-width:0.33962813;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path38"
+       inkscape:connector-curvature="0" /><g
+       id="g40"
+       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
+	 clip-path="url(#clipPath44)"
+	 id="g42"><path
+	   inkscape:connector-curvature="0"
+	   id="path48"
+	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   d="M 1492.37,1040.5 3051.62,260.875" /></g></g><g
+       id="g50"
+       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><path
+	 inkscape:connector-curvature="0"
+	 id="path52"
+	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+	 d="m 1539.31,1027.9 -37.8,8.19 29.29,-25.2 8.51,17.01" /><path
+	 inkscape:connector-curvature="0"
+	 id="path54"
+	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1539.31,1027.9 -37.8,8.19 29.29,-25.2 8.51,17.01 z" /><path
+	 inkscape:connector-curvature="0"
+	 id="path56"
+	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+	 d="m 3004.37,273.79 38.12,-8.505 -29.61,25.515 -8.51,-17.01" /><path
+	 inkscape:connector-curvature="0"
+	 id="path58"
+	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 3004.37,273.79 38.12,-8.505 -29.61,25.515 -8.51,-17.01 z" /></g><g
+       id="g60"
+       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
+	 clip-path="url(#clipPath64)"
+	 id="g62"><path
+	   inkscape:connector-curvature="0"
+	   id="path68"
+	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   d="M 2555.5,1040.5 4114.75,260.875" /></g></g><g
+       id="g70"
+       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><path
+	 inkscape:connector-curvature="0"
+	 id="path72"
+	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+	 d="m 2602.43,1027.9 -37.8,8.19 29.3,-25.2 8.5,17.01" /><path
+	 inkscape:connector-curvature="0"
+	 id="path74"
+	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2602.43,1027.9 -37.8,8.19 29.3,-25.2 8.5,17.01 z" /><path
+	 inkscape:connector-curvature="0"
+	 id="path76"
+	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+	 d="m 4067.5,273.79 38.11,-8.505 -29.61,25.515 -8.5,-17.01" /><path
+	 inkscape:connector-curvature="0"
+	 id="path78"
+	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 4067.5,273.79 38.11,-8.505 -29.61,25.515 -8.5,-17.01 z" /></g><g
+       id="g80"
+       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
+	 clip-path="url(#clipPath84)"
+	 id="g82"><path
+	   inkscape:connector-curvature="0"
+	   id="path88"
+	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   d="m 2555.5,1607.5 1559.25,141.75" /></g></g><g
+       id="g90"
+       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><path
+	 inkscape:connector-curvature="0"
+	 id="path92"
+	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+	 d="m 2602.12,1621.36 -36.54,-12.91 38.43,-5.99 -1.89,18.9" /><path
+	 inkscape:connector-curvature="0"
+	 id="path94"
+	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2602.12,1621.36 -36.54,-12.91 38.43,-5.99 -1.89,18.9 z" /><path
+	 inkscape:connector-curvature="0"
+	 id="path96"
+	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+	 d="m 4067.81,1735.71 36.86,12.6 -38.75,6.3 1.89,-18.9" /><path
+	 inkscape:connector-curvature="0"
+	 id="path98"
+	 style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 4067.81,1735.71 36.86,12.6 -38.75,6.3 1.89,-18.9 z" /></g><g
+       id="g100"
+       transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
+	 clip-path="url(#clipPath104)"
+	 id="g102"><path
+	   inkscape:connector-curvature="0"
+	   id="path108"
+	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   d="m 1492.37,1607.5 1559.25,141.75" /></g></g><path
+       d="m 221.11869,232.99481 -5.25292,-1.85592 5.52462,-0.86111 -0.2717,2.71703"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path112"
+       inkscape:connector-curvature="0" /><path
+       d="m 221.11869,232.99481 -5.25292,-1.85592 5.52462,-0.86111 -0.2717,2.71703 z"
+       style="fill:none;stroke:#000000;stroke-width:0.67925626;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path114"
+       inkscape:connector-curvature="0" /><path
+       d="m 431.8247,249.43353 5.29748,1.81135 -5.56918,0.90567 0.2717,-2.71702"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path116"
+       inkscape:connector-curvature="0" /><path
+       d="m 431.8247,249.43353 5.29748,1.81135 -5.56918,0.90567 0.2717,-2.71702 z"
+       style="fill:none;stroke:#000000;stroke-width:0.67925626;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path118"
+       inkscape:connector-curvature="0" /><g
+       id="g120"
+       transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
+	 transform="matrix(1,0,0,-1,204.52,9.07751)"
+	 style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#d10000;fill-opacity:1;fill-rule:nonzero;stroke:none"
+	 id="text122"><tspan
+	   x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 31.983524 35.661465 39.339405 41.178375 44.856316 48.534256 52.212196 55.890137 59.568073"
+	   y="0"
+	   sodipodi:role="line"
+	   id="tspan124">v4l2_cropcap.bounds</tspan></text>
+</g><g
+       id="g126"
+       transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
+	 transform="matrix(1,0,0,-1,58.5175,166.42)"
+	 style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#0000d1;fill-opacity:1;fill-rule:nonzero;stroke:none"
+	 id="text128"><tspan
+	   x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 31.983524 35.661465 39.339405 41.178375 44.856316 48.534256 50.373226 52.576019 56.25396 59.561459"
+	   y="0"
+	   sodipodi:role="line"
+	   id="tspan130">v4l2_cropcap.defrect</tspan></text>
+</g><g
+       id="g132"
+       transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
+	 transform="matrix(1,0,0,-1,153.49,152.245)"
+	 style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#008f00;fill-opacity:1;fill-rule:nonzero;stroke:none"
+	 id="text134"><tspan
+	   x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 30.514996"
+	   y="0"
+	   sodipodi:role="line"
+	   id="tspan136">v4l2_crop.c</tspan></text>
+</g><g
+       id="g138"
+       transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
+	 transform="matrix(1,0,0,-1,309.415,30.34)"
+	 style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#b000b0;fill-opacity:1;fill-rule:nonzero;stroke:none"
+	 id="text140"><tspan
+	   x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 17.648821 21.326759 23.529554 29.03985 32.717789"
+	   y="0"
+	   sodipodi:role="line"
+	   id="tspan142">v4l2_format</tspan></text>
+</g><text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:32px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="-99.291145"
+       y="-239.49893"
+       id="text3396"
+       sodipodi:linespacing="125%"
+       transform="scale(1,-1)"><tspan
+	 sodipodi:role="line"
+	 id="tspan3398"
+	 x="-99.291145"
+	 y="-239.49893"></tspan><tspan
+	 sodipodi:role="line"
+	 x="-99.291145"
+	 y="-199.49893"
+	 id="tspan3400" /></text>
+</g></svg>
diff --git a/Documentation/userspace-api/media/v4l/depth-formats.rst b/Documentation/userspace-api/media/v4l/depth-formats.rst
new file mode 100644
index 000000000000..6742486a83b5
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/depth-formats.rst
@@ -0,0 +1,24 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _depth-formats:
+
+*************
+Depth Formats
+*************
+
+Depth data provides distance to points, mapped onto the image plane
+
+
+.. toctree::
+    :maxdepth: 1
+
+    pixfmt-inzi
+    pixfmt-z16
+    pixfmt-cnf4
diff --git a/Documentation/userspace-api/media/v4l/dev-capture.rst b/Documentation/userspace-api/media/v4l/dev-capture.rst
new file mode 100644
index 000000000000..44d3094093ab
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-capture.rst
@@ -0,0 +1,111 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _capture:
+
+***********************
+Video Capture Interface
+***********************
+
+Video capture devices sample an analog video signal and store the
+digitized images in memory. Today nearly all devices can capture at full
+25 or 30 frames/second. With this interface applications can control the
+capture process and move images from the driver into user space.
+
+Conventionally V4L2 video capture devices are accessed through character
+device special files named ``/dev/video`` and ``/dev/video0`` to
+``/dev/video63`` with major number 81 and minor numbers 0 to 63.
+``/dev/video`` is typically a symbolic link to the preferred video
+device.
+
+.. note:: The same device file names are used for video output devices.
+
+
+Querying Capabilities
+=====================
+
+Devices supporting the video capture interface set the
+``V4L2_CAP_VIDEO_CAPTURE`` or ``V4L2_CAP_VIDEO_CAPTURE_MPLANE`` flag in
+the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. As secondary device
+functions they may also support the :ref:`video overlay <overlay>`
+(``V4L2_CAP_VIDEO_OVERLAY``) and the :ref:`raw VBI capture <raw-vbi>`
+(``V4L2_CAP_VBI_CAPTURE``) interface. At least one of the read/write or
+streaming I/O methods must be supported. Tuners and audio inputs are
+optional.
+
+
+Supplemental Functions
+======================
+
+Video capture devices shall support :ref:`audio input <audio>`,
+:ref:`tuner`, :ref:`controls <control>`,
+:ref:`cropping and scaling <crop>` and
+:ref:`streaming parameter <streaming-par>` ioctls as needed. The
+:ref:`video input <video>` ioctls must be supported by all video
+capture devices.
+
+
+Image Format Negotiation
+========================
+
+The result of a capture operation is determined by cropping and image
+format parameters. The former select an area of the video picture to
+capture, the latter how images are stored in memory, i. e. in RGB or YUV
+format, the number of bits per pixel or width and height. Together they
+also define how images are scaled in the process.
+
+As usual these parameters are *not* reset at :ref:`open() <func-open>`
+time to permit Unix tool chains, programming a device and then reading
+from it as if it was a plain file. Well written V4L2 applications ensure
+they really get what they want, including cropping and scaling.
+
+Cropping initialization at minimum requires to reset the parameters to
+defaults. An example is given in :ref:`crop`.
+
+To query the current image format applications set the ``type`` field of
+a struct :c:type:`v4l2_format` to
+``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or
+``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and call the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl with a pointer to this
+structure. Drivers fill the struct
+:c:type:`v4l2_pix_format` ``pix`` or the struct
+:c:type:`v4l2_pix_format_mplane` ``pix_mp``
+member of the ``fmt`` union.
+
+To request different parameters applications set the ``type`` field of a
+struct :c:type:`v4l2_format` as above and initialize all
+fields of the struct :c:type:`v4l2_pix_format`
+``vbi`` member of the ``fmt`` union, or better just modify the results
+of :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, and call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
+ioctl with a pointer to this structure. Drivers may adjust the
+parameters and finally return the actual parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
+does.
+
+Like :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` the :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl
+can be used to learn about hardware limitations without disabling I/O or
+possibly time consuming hardware preparations.
+
+The contents of struct :c:type:`v4l2_pix_format` and
+struct :c:type:`v4l2_pix_format_mplane` are
+discussed in :ref:`pixfmt`. See also the specification of the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctls for
+details. Video capture devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
+and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, even if :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ignores all
+requests and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does.
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional.
+
+
+Reading Images
+==============
+
+A video capture device may support the :ref:`read() function <func-read>`
+and/or streaming (:ref:`memory mapping <func-mmap>` or
+:ref:`user pointer <userp>`) I/O. See :ref:`io` for details.
diff --git a/Documentation/userspace-api/media/v4l/dev-decoder.rst b/Documentation/userspace-api/media/v4l/dev-decoder.rst
new file mode 100644
index 000000000000..606b54947e10
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-decoder.rst
@@ -0,0 +1,1101 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _decoder:
+
+*************************************************
+Memory-to-Memory Stateful Video Decoder Interface
+*************************************************
+
+A stateful video decoder takes complete chunks of the bytestream (e.g. Annex-B
+H.264/HEVC stream, raw VP8/9 stream) and decodes them into raw video frames in
+display order. The decoder is expected not to require any additional information
+from the client to process these buffers.
+
+Performing software parsing, processing etc. of the stream in the driver in
+order to support this interface is strongly discouraged. In case such
+operations are needed, use of the Stateless Video Decoder Interface (in
+development) is strongly advised.
+
+Conventions and Notations Used in This Document
+===============================================
+
+1. The general V4L2 API rules apply if not specified in this document
+   otherwise.
+
+2. The meaning of words "must", "may", "should", etc. is as per `RFC
+   2119 <https://tools.ietf.org/html/rfc2119>`_.
+
+3. All steps not marked "optional" are required.
+
+4. :c:func:`VIDIOC_G_EXT_CTRLS` and :c:func:`VIDIOC_S_EXT_CTRLS` may be used
+   interchangeably with :c:func:`VIDIOC_G_CTRL` and :c:func:`VIDIOC_S_CTRL`,
+   unless specified otherwise.
+
+5. Single-planar API (see :ref:`planar-apis`) and applicable structures may be
+   used interchangeably with multi-planar API, unless specified otherwise,
+   depending on decoder capabilities and following the general V4L2 guidelines.
+
+6. i = [a..b]: sequence of integers from a to b, inclusive, i.e. i =
+   [0..2]: i = 0, 1, 2.
+
+7. Given an ``OUTPUT`` buffer A, then A’ represents a buffer on the ``CAPTURE``
+   queue containing data that resulted from processing buffer A.
+
+.. _decoder-glossary:
+
+Glossary
+========
+
+CAPTURE
+   the destination buffer queue; for decoders, the queue of buffers containing
+   decoded frames; for encoders, the queue of buffers containing an encoded
+   bytestream; ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or
+   ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``; data is captured from the hardware
+   into ``CAPTURE`` buffers.
+
+client
+   the application communicating with the decoder or encoder implementing
+   this interface.
+
+coded format
+   encoded/compressed video bytestream format (e.g. H.264, VP8, etc.); see
+   also: raw format.
+
+coded height
+   height for given coded resolution.
+
+coded resolution
+   stream resolution in pixels aligned to codec and hardware requirements;
+   typically visible resolution rounded up to full macroblocks;
+   see also: visible resolution.
+
+coded width
+   width for given coded resolution.
+
+decode order
+   the order in which frames are decoded; may differ from display order if the
+   coded format includes a feature of frame reordering; for decoders,
+   ``OUTPUT`` buffers must be queued by the client in decode order; for
+   encoders ``CAPTURE`` buffers must be returned by the encoder in decode order.
+
+destination
+   data resulting from the decode process; see ``CAPTURE``.
+
+display order
+   the order in which frames must be displayed; for encoders, ``OUTPUT``
+   buffers must be queued by the client in display order; for decoders,
+   ``CAPTURE`` buffers must be returned by the decoder in display order.
+
+DPB
+   Decoded Picture Buffer; an H.264/HEVC term for a buffer that stores a decoded
+   raw frame available for reference in further decoding steps.
+
+EOS
+   end of stream.
+
+IDR
+   Instantaneous Decoder Refresh; a type of a keyframe in an H.264/HEVC-encoded
+   stream, which clears the list of earlier reference frames (DPBs).
+
+keyframe
+   an encoded frame that does not reference frames decoded earlier, i.e.
+   can be decoded fully on its own.
+
+macroblock
+   a processing unit in image and video compression formats based on linear
+   block transforms (e.g. H.264, VP8, VP9); codec-specific, but for most of
+   popular codecs the size is 16x16 samples (pixels).
+
+OUTPUT
+   the source buffer queue; for decoders, the queue of buffers containing
+   an encoded bytestream; for encoders, the queue of buffers containing raw
+   frames; ``V4L2_BUF_TYPE_VIDEO_OUTPUT`` or
+   ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``; the hardware is fed with data
+   from ``OUTPUT`` buffers.
+
+PPS
+   Picture Parameter Set; a type of metadata entity in an H.264/HEVC bytestream.
+
+raw format
+   uncompressed format containing raw pixel data (e.g. YUV, RGB formats).
+
+resume point
+   a point in the bytestream from which decoding may start/continue, without
+   any previous state/data present, e.g.: a keyframe (VP8/VP9) or
+   SPS/PPS/IDR sequence (H.264/HEVC); a resume point is required to start decode
+   of a new stream, or to resume decoding after a seek.
+
+source
+   data fed to the decoder or encoder; see ``OUTPUT``.
+
+source height
+   height in pixels for given source resolution; relevant to encoders only.
+
+source resolution
+   resolution in pixels of source frames being source to the encoder and
+   subject to further cropping to the bounds of visible resolution; relevant to
+   encoders only.
+
+source width
+   width in pixels for given source resolution; relevant to encoders only.
+
+SPS
+   Sequence Parameter Set; a type of metadata entity in an H.264/HEVC bytestream.
+
+stream metadata
+   additional (non-visual) information contained inside encoded bytestream;
+   for example: coded resolution, visible resolution, codec profile.
+
+visible height
+   height for given visible resolution; display height.
+
+visible resolution
+   stream resolution of the visible picture, in pixels, to be used for
+   display purposes; must be smaller or equal to coded resolution;
+   display resolution.
+
+visible width
+   width for given visible resolution; display width.
+
+State Machine
+=============
+
+.. kernel-render:: DOT
+   :alt: DOT digraph of decoder state machine
+   :caption: Decoder State Machine
+
+   digraph decoder_state_machine {
+       node [shape = doublecircle, label="Decoding"] Decoding;
+
+       node [shape = circle, label="Initialization"] Initialization;
+       node [shape = circle, label="Capture\nsetup"] CaptureSetup;
+       node [shape = circle, label="Dynamic\nResolution\nChange"] ResChange;
+       node [shape = circle, label="Stopped"] Stopped;
+       node [shape = circle, label="Drain"] Drain;
+       node [shape = circle, label="Seek"] Seek;
+       node [shape = circle, label="End of Stream"] EoS;
+
+       node [shape = point]; qi
+       qi -> Initialization [ label = "open()" ];
+
+       Initialization -> CaptureSetup [ label = "CAPTURE\nformat\nestablished" ];
+
+       CaptureSetup -> Stopped [ label = "CAPTURE\nbuffers\nready" ];
+
+       Decoding -> ResChange [ label = "Stream\nresolution\nchange" ];
+       Decoding -> Drain [ label = "V4L2_DEC_CMD_STOP" ];
+       Decoding -> EoS [ label = "EoS mark\nin the stream" ];
+       Decoding -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
+       Decoding -> Stopped [ label = "VIDIOC_STREAMOFF(CAPTURE)" ];
+       Decoding -> Decoding;
+
+       ResChange -> CaptureSetup [ label = "CAPTURE\nformat\nestablished" ];
+       ResChange -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
+
+       EoS -> Drain [ label = "Implicit\ndrain" ];
+
+       Drain -> Stopped [ label = "All CAPTURE\nbuffers dequeued\nor\nVIDIOC_STREAMOFF(CAPTURE)" ];
+       Drain -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
+
+       Seek -> Decoding [ label = "VIDIOC_STREAMON(OUTPUT)" ];
+       Seek -> Initialization [ label = "VIDIOC_REQBUFS(OUTPUT, 0)" ];
+
+       Stopped -> Decoding [ label = "V4L2_DEC_CMD_START\nor\nVIDIOC_STREAMON(CAPTURE)" ];
+       Stopped -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
+   }
+
+Querying Capabilities
+=====================
+
+1. To enumerate the set of coded formats supported by the decoder, the
+   client may call :c:func:`VIDIOC_ENUM_FMT` on ``OUTPUT``.
+
+   * The full set of supported formats will be returned, regardless of the
+     format set on ``CAPTURE``.
+   * Check the flags field of :c:type:`v4l2_fmtdesc` for more information
+     about the decoder's capabilities with respect to each coded format.
+     In particular whether or not the decoder has a full-fledged bytestream
+     parser and if the decoder supports dynamic resolution changes.
+
+2. To enumerate the set of supported raw formats, the client may call
+   :c:func:`VIDIOC_ENUM_FMT` on ``CAPTURE``.
+
+   * Only the formats supported for the format currently active on ``OUTPUT``
+     will be returned.
+
+   * In order to enumerate raw formats supported by a given coded format,
+     the client must first set that coded format on ``OUTPUT`` and then
+     enumerate formats on ``CAPTURE``.
+
+3. The client may use :c:func:`VIDIOC_ENUM_FRAMESIZES` to detect supported
+   resolutions for a given format, passing desired pixel format in
+   :c:type:`v4l2_frmsizeenum` ``pixel_format``.
+
+   * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a coded pixel
+     format will include all possible coded resolutions supported by the
+     decoder for given coded pixel format.
+
+   * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a raw pixel format
+     will include all possible frame buffer resolutions supported by the
+     decoder for given raw pixel format and the coded format currently set on
+     ``OUTPUT``.
+
+4. Supported profiles and levels for the coded format currently set on
+   ``OUTPUT``, if applicable, may be queried using their respective controls
+   via :c:func:`VIDIOC_QUERYCTRL`.
+
+Initialization
+==============
+
+1. Set the coded format on ``OUTPUT`` via :c:func:`VIDIOC_S_FMT`
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+     ``pixelformat``
+         a coded pixel format.
+
+     ``width``, ``height``
+         coded resolution of the stream; required only if it cannot be parsed
+         from the stream for the given coded format; otherwise the decoder will
+         use this resolution as a placeholder resolution that will likely change
+         as soon as it can parse the actual coded resolution from the stream.
+
+     ``sizeimage``
+         desired size of ``OUTPUT`` buffers; the decoder may adjust it to
+         match hardware requirements.
+
+     other fields
+         follow standard semantics.
+
+   * **Return fields:**
+
+     ``sizeimage``
+         adjusted size of ``OUTPUT`` buffers.
+
+   * The ``CAPTURE`` format will be updated with an appropriate frame buffer
+     resolution instantly based on the width and height returned by
+     :c:func:`VIDIOC_S_FMT`.
+     However, for coded formats that include stream resolution information,
+     after the decoder is done parsing the information from the stream, it will
+     update the ``CAPTURE`` format with new values and signal a source change
+     event, regardless of whether they match the values set by the client or
+     not.
+
+   .. important::
+
+      Changing the ``OUTPUT`` format may change the currently set ``CAPTURE``
+      format. How the new ``CAPTURE`` format is determined is up to the decoder
+      and the client must ensure it matches its needs afterwards.
+
+2.  Allocate source (bytestream) buffers via :c:func:`VIDIOC_REQBUFS` on
+    ``OUTPUT``.
+
+    * **Required fields:**
+
+      ``count``
+          requested number of buffers to allocate; greater than zero.
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+      ``memory``
+          follows standard semantics.
+
+    * **Return fields:**
+
+      ``count``
+          the actual number of buffers allocated.
+
+    .. warning::
+
+       The actual number of allocated buffers may differ from the ``count``
+       given. The client must check the updated value of ``count`` after the
+       call returns.
+
+    Alternatively, :c:func:`VIDIOC_CREATE_BUFS` on the ``OUTPUT`` queue can be
+    used to have more control over buffer allocation.
+
+    * **Required fields:**
+
+      ``count``
+          requested number of buffers to allocate; greater than zero.
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+      ``memory``
+          follows standard semantics.
+
+      ``format``
+          follows standard semantics.
+
+    * **Return fields:**
+
+      ``count``
+          adjusted to the number of allocated buffers.
+
+    .. warning::
+
+       The actual number of allocated buffers may differ from the ``count``
+       given. The client must check the updated value of ``count`` after the
+       call returns.
+
+3.  Start streaming on the ``OUTPUT`` queue via :c:func:`VIDIOC_STREAMON`.
+
+4.  **This step only applies to coded formats that contain resolution information
+    in the stream.** Continue queuing/dequeuing bytestream buffers to/from the
+    ``OUTPUT`` queue via :c:func:`VIDIOC_QBUF` and :c:func:`VIDIOC_DQBUF`. The
+    buffers will be processed and returned to the client in order, until
+    required metadata to configure the ``CAPTURE`` queue are found. This is
+    indicated by the decoder sending a ``V4L2_EVENT_SOURCE_CHANGE`` event with
+    ``changes`` set to ``V4L2_EVENT_SRC_CH_RESOLUTION``.
+
+    * It is not an error if the first buffer does not contain enough data for
+      this to occur. Processing of the buffers will continue as long as more
+      data is needed.
+
+    * If data in a buffer that triggers the event is required to decode the
+      first frame, it will not be returned to the client, until the
+      initialization sequence completes and the frame is decoded.
+
+    * If the client has not set the coded resolution of the stream on its own,
+      calling :c:func:`VIDIOC_G_FMT`, :c:func:`VIDIOC_S_FMT`,
+      :c:func:`VIDIOC_TRY_FMT` or :c:func:`VIDIOC_REQBUFS` on the ``CAPTURE``
+      queue will not return the real values for the stream until a
+      ``V4L2_EVENT_SOURCE_CHANGE`` event with ``changes`` set to
+      ``V4L2_EVENT_SRC_CH_RESOLUTION`` is signaled.
+
+    .. important::
+
+       Any client query issued after the decoder queues the event will return
+       values applying to the just parsed stream, including queue formats,
+       selection rectangles and controls.
+
+    .. note::
+
+       A client capable of acquiring stream parameters from the bytestream on
+       its own may attempt to set the width and height of the ``OUTPUT`` format
+       to non-zero values matching the coded size of the stream, skip this step
+       and continue with the `Capture Setup` sequence. However, it must not
+       rely on any driver queries regarding stream parameters, such as
+       selection rectangles and controls, since the decoder has not parsed them
+       from the stream yet. If the values configured by the client do not match
+       those parsed by the decoder, a `Dynamic Resolution Change` will be
+       triggered to reconfigure them.
+
+    .. note::
+
+       No decoded frames are produced during this phase.
+
+5.  Continue with the `Capture Setup` sequence.
+
+Capture Setup
+=============
+
+1.  Call :c:func:`VIDIOC_G_FMT` on the ``CAPTURE`` queue to get format for the
+    destination buffers parsed/decoded from the bytestream.
+
+    * **Required fields:**
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+    * **Return fields:**
+
+      ``width``, ``height``
+          frame buffer resolution for the decoded frames.
+
+      ``pixelformat``
+          pixel format for decoded frames.
+
+      ``num_planes`` (for _MPLANE ``type`` only)
+          number of planes for pixelformat.
+
+      ``sizeimage``, ``bytesperline``
+          as per standard semantics; matching frame buffer format.
+
+    .. note::
+
+       The value of ``pixelformat`` may be any pixel format supported by the
+       decoder for the current stream. The decoder should choose a
+       preferred/optimal format for the default configuration. For example, a
+       YUV format may be preferred over an RGB format if an additional
+       conversion step would be required for the latter.
+
+2.  **Optional.** Acquire the visible resolution via
+    :c:func:`VIDIOC_G_SELECTION`.
+
+    * **Required fields:**
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+      ``target``
+          set to ``V4L2_SEL_TGT_COMPOSE``.
+
+    * **Return fields:**
+
+      ``r.left``, ``r.top``, ``r.width``, ``r.height``
+          the visible rectangle; it must fit within the frame buffer resolution
+          returned by :c:func:`VIDIOC_G_FMT` on ``CAPTURE``.
+
+    * The following selection targets are supported on ``CAPTURE``:
+
+      ``V4L2_SEL_TGT_CROP_BOUNDS``
+          corresponds to the coded resolution of the stream.
+
+      ``V4L2_SEL_TGT_CROP_DEFAULT``
+          the rectangle covering the part of the ``CAPTURE`` buffer that
+          contains meaningful picture data (visible area); width and height
+          will be equal to the visible resolution of the stream.
+
+      ``V4L2_SEL_TGT_CROP``
+          the rectangle within the coded resolution to be output to
+          ``CAPTURE``; defaults to ``V4L2_SEL_TGT_CROP_DEFAULT``; read-only on
+          hardware without additional compose/scaling capabilities.
+
+      ``V4L2_SEL_TGT_COMPOSE_BOUNDS``
+          the maximum rectangle within a ``CAPTURE`` buffer, which the cropped
+          frame can be composed into; equal to ``V4L2_SEL_TGT_CROP`` if the
+          hardware does not support compose/scaling.
+
+      ``V4L2_SEL_TGT_COMPOSE_DEFAULT``
+          equal to ``V4L2_SEL_TGT_CROP``.
+
+      ``V4L2_SEL_TGT_COMPOSE``
+          the rectangle inside a ``CAPTURE`` buffer into which the cropped
+          frame is written; defaults to ``V4L2_SEL_TGT_COMPOSE_DEFAULT``;
+          read-only on hardware without additional compose/scaling capabilities.
+
+      ``V4L2_SEL_TGT_COMPOSE_PADDED``
+          the rectangle inside a ``CAPTURE`` buffer which is overwritten by the
+          hardware; equal to ``V4L2_SEL_TGT_COMPOSE`` if the hardware does not
+          write padding pixels.
+
+    .. warning::
+
+       The values are guaranteed to be meaningful only after the decoder
+       successfully parses the stream metadata. The client must not rely on the
+       query before that happens.
+
+3.  **Optional.** Enumerate ``CAPTURE`` formats via :c:func:`VIDIOC_ENUM_FMT` on
+    the ``CAPTURE`` queue. Once the stream information is parsed and known, the
+    client may use this ioctl to discover which raw formats are supported for
+    given stream and select one of them via :c:func:`VIDIOC_S_FMT`.
+
+    .. important::
+
+       The decoder will return only formats supported for the currently
+       established coded format, as per the ``OUTPUT`` format and/or stream
+       metadata parsed in this initialization sequence, even if more formats
+       may be supported by the decoder in general. In other words, the set
+       returned will be a subset of the initial query mentioned in the
+       `Querying Capabilities` section.
+
+       For example, a decoder may support YUV and RGB formats for resolutions
+       1920x1088 and lower, but only YUV for higher resolutions (due to
+       hardware limitations). After parsing a resolution of 1920x1088 or lower,
+       :c:func:`VIDIOC_ENUM_FMT` may return a set of YUV and RGB pixel formats,
+       but after parsing resolution higher than 1920x1088, the decoder will not
+       return RGB, unsupported for this resolution.
+
+       However, subsequent resolution change event triggered after
+       discovering a resolution change within the same stream may switch
+       the stream into a lower resolution and :c:func:`VIDIOC_ENUM_FMT`
+       would return RGB formats again in that case.
+
+4.  **Optional.** Set the ``CAPTURE`` format via :c:func:`VIDIOC_S_FMT` on the
+    ``CAPTURE`` queue. The client may choose a different format than
+    selected/suggested by the decoder in :c:func:`VIDIOC_G_FMT`.
+
+    * **Required fields:**
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+      ``pixelformat``
+          a raw pixel format.
+
+      ``width``, ``height``
+         frame buffer resolution of the decoded stream; typically unchanged from
+	 what was returned with :c:func:`VIDIOC_G_FMT`, but it may be different
+	 if the hardware supports composition and/or scaling.
+
+   * Setting the ``CAPTURE`` format will reset the compose selection rectangles
+     to their default values, based on the new resolution, as described in the
+     previous step.
+
+5. **Optional.** Set the compose rectangle via :c:func:`VIDIOC_S_SELECTION` on
+   the ``CAPTURE`` queue if it is desired and if the decoder has compose and/or
+   scaling capabilities.
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+     ``target``
+         set to ``V4L2_SEL_TGT_COMPOSE``.
+
+     ``r.left``, ``r.top``, ``r.width``, ``r.height``
+         the rectangle inside a ``CAPTURE`` buffer into which the cropped
+         frame is written; defaults to ``V4L2_SEL_TGT_COMPOSE_DEFAULT``;
+         read-only on hardware without additional compose/scaling capabilities.
+
+   * **Return fields:**
+
+     ``r.left``, ``r.top``, ``r.width``, ``r.height``
+         the visible rectangle; it must fit within the frame buffer resolution
+         returned by :c:func:`VIDIOC_G_FMT` on ``CAPTURE``.
+
+   .. warning::
+
+      The decoder may adjust the compose rectangle to the nearest
+      supported one to meet codec and hardware requirements. The client needs
+      to check the adjusted rectangle returned by :c:func:`VIDIOC_S_SELECTION`.
+
+6.  If all the following conditions are met, the client may resume the decoding
+    instantly:
+
+    * ``sizeimage`` of the new format (determined in previous steps) is less
+      than or equal to the size of currently allocated buffers,
+
+    * the number of buffers currently allocated is greater than or equal to the
+      minimum number of buffers acquired in previous steps. To fulfill this
+      requirement, the client may use :c:func:`VIDIOC_CREATE_BUFS` to add new
+      buffers.
+
+    In that case, the remaining steps do not apply and the client may resume
+    the decoding by one of the following actions:
+
+    * if the ``CAPTURE`` queue is streaming, call :c:func:`VIDIOC_DECODER_CMD`
+      with the ``V4L2_DEC_CMD_START`` command,
+
+    * if the ``CAPTURE`` queue is not streaming, call :c:func:`VIDIOC_STREAMON`
+      on the ``CAPTURE`` queue.
+
+    However, if the client intends to change the buffer set, to lower
+    memory usage or for any other reasons, it may be achieved by following
+    the steps below.
+
+7.  **If the** ``CAPTURE`` **queue is streaming,** keep queuing and dequeuing
+    buffers on the ``CAPTURE`` queue until a buffer marked with the
+    ``V4L2_BUF_FLAG_LAST`` flag is dequeued.
+
+8.  **If the** ``CAPTURE`` **queue is streaming,** call :c:func:`VIDIOC_STREAMOFF`
+    on the ``CAPTURE`` queue to stop streaming.
+
+    .. warning::
+
+       The ``OUTPUT`` queue must remain streaming. Calling
+       :c:func:`VIDIOC_STREAMOFF` on it would abort the sequence and trigger a
+       seek.
+
+9.  **If the** ``CAPTURE`` **queue has buffers allocated,** free the ``CAPTURE``
+    buffers using :c:func:`VIDIOC_REQBUFS`.
+
+    * **Required fields:**
+
+      ``count``
+          set to 0.
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+      ``memory``
+          follows standard semantics.
+
+10. Allocate ``CAPTURE`` buffers via :c:func:`VIDIOC_REQBUFS` on the
+    ``CAPTURE`` queue.
+
+    * **Required fields:**
+
+      ``count``
+          requested number of buffers to allocate; greater than zero.
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+      ``memory``
+          follows standard semantics.
+
+    * **Return fields:**
+
+      ``count``
+          actual number of buffers allocated.
+
+    .. warning::
+
+       The actual number of allocated buffers may differ from the ``count``
+       given. The client must check the updated value of ``count`` after the
+       call returns.
+
+    .. note::
+
+       To allocate more than the minimum number of buffers (for pipeline
+       depth), the client may query the ``V4L2_CID_MIN_BUFFERS_FOR_CAPTURE``
+       control to get the minimum number of buffers required, and pass the
+       obtained value plus the number of additional buffers needed in the
+       ``count`` field to :c:func:`VIDIOC_REQBUFS`.
+
+    Alternatively, :c:func:`VIDIOC_CREATE_BUFS` on the ``CAPTURE`` queue can be
+    used to have more control over buffer allocation. For example, by
+    allocating buffers larger than the current ``CAPTURE`` format, future
+    resolution changes can be accommodated.
+
+    * **Required fields:**
+
+      ``count``
+          requested number of buffers to allocate; greater than zero.
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+      ``memory``
+          follows standard semantics.
+
+      ``format``
+          a format representing the maximum framebuffer resolution to be
+          accommodated by newly allocated buffers.
+
+    * **Return fields:**
+
+      ``count``
+          adjusted to the number of allocated buffers.
+
+    .. warning::
+
+        The actual number of allocated buffers may differ from the ``count``
+        given. The client must check the updated value of ``count`` after the
+        call returns.
+
+    .. note::
+
+       To allocate buffers for a format different than parsed from the stream
+       metadata, the client must proceed as follows, before the metadata
+       parsing is initiated:
+
+       * set width and height of the ``OUTPUT`` format to desired coded resolution to
+         let the decoder configure the ``CAPTURE`` format appropriately,
+
+       * query the ``CAPTURE`` format using :c:func:`VIDIOC_G_FMT` and save it
+         until this step.
+
+       The format obtained in the query may be then used with
+       :c:func:`VIDIOC_CREATE_BUFS` in this step to allocate the buffers.
+
+11. Call :c:func:`VIDIOC_STREAMON` on the ``CAPTURE`` queue to start decoding
+    frames.
+
+Decoding
+========
+
+This state is reached after the `Capture Setup` sequence finishes successfully.
+In this state, the client queues and dequeues buffers to both queues via
+:c:func:`VIDIOC_QBUF` and :c:func:`VIDIOC_DQBUF`, following the standard
+semantics.
+
+The content of the source ``OUTPUT`` buffers depends on the active coded pixel
+format and may be affected by codec-specific extended controls, as stated in
+the documentation of each format.
+
+Both queues operate independently, following the standard behavior of V4L2
+buffer queues and memory-to-memory devices. In addition, the order of decoded
+frames dequeued from the ``CAPTURE`` queue may differ from the order of queuing
+coded frames to the ``OUTPUT`` queue, due to properties of the selected coded
+format, e.g. frame reordering.
+
+The client must not assume any direct relationship between ``CAPTURE``
+and ``OUTPUT`` buffers and any specific timing of buffers becoming
+available to dequeue. Specifically:
+
+* a buffer queued to ``OUTPUT`` may result in no buffers being produced
+  on ``CAPTURE`` (e.g. if it does not contain encoded data, or if only
+  metadata syntax structures are present in it),
+
+* a buffer queued to ``OUTPUT`` may result in more than one buffer produced
+  on ``CAPTURE`` (if the encoded data contained more than one frame, or if
+  returning a decoded frame allowed the decoder to return a frame that
+  preceded it in decode, but succeeded it in the display order),
+
+* a buffer queued to ``OUTPUT`` may result in a buffer being produced on
+  ``CAPTURE`` later into decode process, and/or after processing further
+  ``OUTPUT`` buffers, or be returned out of order, e.g. if display
+  reordering is used,
+
+* buffers may become available on the ``CAPTURE`` queue without additional
+  buffers queued to ``OUTPUT`` (e.g. during drain or ``EOS``), because of the
+  ``OUTPUT`` buffers queued in the past whose decoding results are only
+  available at later time, due to specifics of the decoding process.
+
+.. note::
+
+   To allow matching decoded ``CAPTURE`` buffers with ``OUTPUT`` buffers they
+   originated from, the client can set the ``timestamp`` field of the
+   :c:type:`v4l2_buffer` struct when queuing an ``OUTPUT`` buffer. The
+   ``CAPTURE`` buffer(s), which resulted from decoding that ``OUTPUT`` buffer
+   will have their ``timestamp`` field set to the same value when dequeued.
+
+   In addition to the straightforward case of one ``OUTPUT`` buffer producing
+   one ``CAPTURE`` buffer, the following cases are defined:
+
+   * one ``OUTPUT`` buffer generates multiple ``CAPTURE`` buffers: the same
+     ``OUTPUT`` timestamp will be copied to multiple ``CAPTURE`` buffers.
+
+   * multiple ``OUTPUT`` buffers generate one ``CAPTURE`` buffer: timestamp of
+     the ``OUTPUT`` buffer queued first will be copied.
+
+   * the decoding order differs from the display order (i.e. the ``CAPTURE``
+     buffers are out-of-order compared to the ``OUTPUT`` buffers): ``CAPTURE``
+     timestamps will not retain the order of ``OUTPUT`` timestamps.
+
+During the decoding, the decoder may initiate one of the special sequences, as
+listed below. The sequences will result in the decoder returning all the
+``CAPTURE`` buffers that originated from all the ``OUTPUT`` buffers processed
+before the sequence started. Last of the buffers will have the
+``V4L2_BUF_FLAG_LAST`` flag set. To determine the sequence to follow, the client
+must check if there is any pending event and:
+
+* if a ``V4L2_EVENT_SOURCE_CHANGE`` event with ``changes`` set to
+  ``V4L2_EVENT_SRC_CH_RESOLUTION`` is pending, the `Dynamic Resolution
+  Change` sequence needs to be followed,
+
+* if a ``V4L2_EVENT_EOS`` event is pending, the `End of Stream` sequence needs
+  to be followed.
+
+Some of the sequences can be intermixed with each other and need to be handled
+as they happen. The exact operation is documented for each sequence.
+
+Should a decoding error occur, it will be reported to the client with the level
+of details depending on the decoder capabilities. Specifically:
+
+* the CAPTURE buffer that contains the results of the failed decode operation
+  will be returned with the V4L2_BUF_FLAG_ERROR flag set,
+
+* if the decoder is able to precisely report the OUTPUT buffer that triggered
+  the error, such buffer will be returned with the V4L2_BUF_FLAG_ERROR flag
+  set.
+
+In case of a fatal failure that does not allow the decoding to continue, any
+further operations on corresponding decoder file handle will return the -EIO
+error code. The client may close the file handle and open a new one, or
+alternatively reinitialize the instance by stopping streaming on both queues,
+releasing all buffers and performing the Initialization sequence again.
+
+Seek
+====
+
+Seek is controlled by the ``OUTPUT`` queue, as it is the source of coded data.
+The seek does not require any specific operation on the ``CAPTURE`` queue, but
+it may be affected as per normal decoder operation.
+
+1. Stop the ``OUTPUT`` queue to begin the seek sequence via
+   :c:func:`VIDIOC_STREAMOFF`.
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+   * The decoder will drop all the pending ``OUTPUT`` buffers and they must be
+     treated as returned to the client (following standard semantics).
+
+2. Restart the ``OUTPUT`` queue via :c:func:`VIDIOC_STREAMON`
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+   * The decoder will start accepting new source bytestream buffers after the
+     call returns.
+
+3. Start queuing buffers containing coded data after the seek to the ``OUTPUT``
+   queue until a suitable resume point is found.
+
+   .. note::
+
+      There is no requirement to begin queuing coded data starting exactly
+      from a resume point (e.g. SPS or a keyframe). Any queued ``OUTPUT``
+      buffers will be processed and returned to the client until a suitable
+      resume point is found.  While looking for a resume point, the decoder
+      should not produce any decoded frames into ``CAPTURE`` buffers.
+
+      Some hardware is known to mishandle seeks to a non-resume point. Such an
+      operation may result in an unspecified number of corrupted decoded frames
+      being made available on the ``CAPTURE`` queue. Drivers must ensure that
+      no fatal decoding errors or crashes occur, and implement any necessary
+      handling and workarounds for hardware issues related to seek operations.
+
+   .. warning::
+
+      In case of the H.264/HEVC codec, the client must take care not to seek
+      over a change of SPS/PPS. Even though the target frame could be a
+      keyframe, the stale SPS/PPS inside decoder state would lead to undefined
+      results when decoding. Although the decoder must handle that case without
+      a crash or a fatal decode error, the client must not expect a sensible
+      decode output.
+
+      If the hardware can detect such corrupted decoded frames, then
+      corresponding buffers will be returned to the client with the
+      V4L2_BUF_FLAG_ERROR set. See the `Decoding` section for further
+      description of decode error reporting.
+
+4. After a resume point is found, the decoder will start returning ``CAPTURE``
+   buffers containing decoded frames.
+
+.. important::
+
+   A seek may result in the `Dynamic Resolution Change` sequence being
+   initiated, due to the seek target having decoding parameters different from
+   the part of the stream decoded before the seek. The sequence must be handled
+   as per normal decoder operation.
+
+.. warning::
+
+   It is not specified when the ``CAPTURE`` queue starts producing buffers
+   containing decoded data from the ``OUTPUT`` buffers queued after the seek,
+   as it operates independently from the ``OUTPUT`` queue.
+
+   The decoder may return a number of remaining ``CAPTURE`` buffers containing
+   decoded frames originating from the ``OUTPUT`` buffers queued before the
+   seek sequence is performed.
+
+   The ``VIDIOC_STREAMOFF`` operation discards any remaining queued
+   ``OUTPUT`` buffers, which means that not all of the ``OUTPUT`` buffers
+   queued before the seek sequence may have matching ``CAPTURE`` buffers
+   produced.  For example, given the sequence of operations on the
+   ``OUTPUT`` queue:
+
+     QBUF(A), QBUF(B), STREAMOFF(), STREAMON(), QBUF(G), QBUF(H),
+
+   any of the following results on the ``CAPTURE`` queue is allowed:
+
+     {A’, B’, G’, H’}, {A’, G’, H’}, {G’, H’}.
+
+   To determine the CAPTURE buffer containing the first decoded frame after the
+   seek, the client may observe the timestamps to match the CAPTURE and OUTPUT
+   buffers or use V4L2_DEC_CMD_STOP and V4L2_DEC_CMD_START to drain the
+   decoder.
+
+.. note::
+
+   To achieve instantaneous seek, the client may restart streaming on the
+   ``CAPTURE`` queue too to discard decoded, but not yet dequeued buffers.
+
+Dynamic Resolution Change
+=========================
+
+Streams that include resolution metadata in the bytestream may require switching
+to a different resolution during the decoding.
+
+.. note::
+
+   Not all decoders can detect resolution changes. Those that do set the
+   ``V4L2_FMT_FLAG_DYN_RESOLUTION`` flag for the coded format when
+   :c:func:`VIDIOC_ENUM_FMT` is called.
+
+The sequence starts when the decoder detects a coded frame with one or more of
+the following parameters different from those previously established (and
+reflected by corresponding queries):
+
+* coded resolution (``OUTPUT`` width and height),
+
+* visible resolution (selection rectangles),
+
+* the minimum number of buffers needed for decoding.
+
+Whenever that happens, the decoder must proceed as follows:
+
+1.  After encountering a resolution change in the stream, the decoder sends a
+    ``V4L2_EVENT_SOURCE_CHANGE`` event with ``changes`` set to
+    ``V4L2_EVENT_SRC_CH_RESOLUTION``.
+
+    .. important::
+
+       Any client query issued after the decoder queues the event will return
+       values applying to the stream after the resolution change, including
+       queue formats, selection rectangles and controls.
+
+2.  The decoder will then process and decode all remaining buffers from before
+    the resolution change point.
+
+    * The last buffer from before the change must be marked with the
+      ``V4L2_BUF_FLAG_LAST`` flag, similarly to the `Drain` sequence above.
+
+    .. warning::
+
+       The last buffer may be empty (with :c:type:`v4l2_buffer` ``bytesused``
+       = 0) and in that case it must be ignored by the client, as it does not
+       contain a decoded frame.
+
+    .. note::
+
+       Any attempt to dequeue more ``CAPTURE`` buffers beyond the buffer marked
+       with ``V4L2_BUF_FLAG_LAST`` will result in a -EPIPE error from
+       :c:func:`VIDIOC_DQBUF`.
+
+The client must continue the sequence as described below to continue the
+decoding process.
+
+1.  Dequeue the source change event.
+
+    .. important::
+
+       A source change triggers an implicit decoder drain, similar to the
+       explicit `Drain` sequence. The decoder is stopped after it completes.
+       The decoding process must be resumed with either a pair of calls to
+       :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
+       ``CAPTURE`` queue, or a call to :c:func:`VIDIOC_DECODER_CMD` with the
+       ``V4L2_DEC_CMD_START`` command.
+
+2.  Continue with the `Capture Setup` sequence.
+
+.. note::
+
+   During the resolution change sequence, the ``OUTPUT`` queue must remain
+   streaming. Calling :c:func:`VIDIOC_STREAMOFF` on the ``OUTPUT`` queue would
+   abort the sequence and initiate a seek.
+
+   In principle, the ``OUTPUT`` queue operates separately from the ``CAPTURE``
+   queue and this remains true for the duration of the entire resolution change
+   sequence as well.
+
+   The client should, for best performance and simplicity, keep queuing/dequeuing
+   buffers to/from the ``OUTPUT`` queue even while processing this sequence.
+
+Drain
+=====
+
+To ensure that all queued ``OUTPUT`` buffers have been processed and related
+``CAPTURE`` buffers are given to the client, the client must follow the drain
+sequence described below. After the drain sequence ends, the client has
+received all decoded frames for all ``OUTPUT`` buffers queued before the
+sequence was started.
+
+1. Begin drain by issuing :c:func:`VIDIOC_DECODER_CMD`.
+
+   * **Required fields:**
+
+     ``cmd``
+         set to ``V4L2_DEC_CMD_STOP``.
+
+     ``flags``
+         set to 0.
+
+     ``pts``
+         set to 0.
+
+   .. warning::
+
+      The sequence can be only initiated if both ``OUTPUT`` and ``CAPTURE``
+      queues are streaming. For compatibility reasons, the call to
+      :c:func:`VIDIOC_DECODER_CMD` will not fail even if any of the queues is
+      not streaming, but at the same time it will not initiate the `Drain`
+      sequence and so the steps described below would not be applicable.
+
+2. Any ``OUTPUT`` buffers queued by the client before the
+   :c:func:`VIDIOC_DECODER_CMD` was issued will be processed and decoded as
+   normal. The client must continue to handle both queues independently,
+   similarly to normal decode operation. This includes:
+
+   * handling any operations triggered as a result of processing those buffers,
+     such as the `Dynamic Resolution Change` sequence, before continuing with
+     the drain sequence,
+
+   * queuing and dequeuing ``CAPTURE`` buffers, until a buffer marked with the
+     ``V4L2_BUF_FLAG_LAST`` flag is dequeued,
+
+     .. warning::
+
+        The last buffer may be empty (with :c:type:`v4l2_buffer`
+        ``bytesused`` = 0) and in that case it must be ignored by the client,
+        as it does not contain a decoded frame.
+
+     .. note::
+
+        Any attempt to dequeue more ``CAPTURE`` buffers beyond the buffer
+        marked with ``V4L2_BUF_FLAG_LAST`` will result in a -EPIPE error from
+        :c:func:`VIDIOC_DQBUF`.
+
+   * dequeuing processed ``OUTPUT`` buffers, until all the buffers queued
+     before the ``V4L2_DEC_CMD_STOP`` command are dequeued,
+
+   * dequeuing the ``V4L2_EVENT_EOS`` event, if the client subscribed to it.
+
+   .. note::
+
+      For backwards compatibility, the decoder will signal a ``V4L2_EVENT_EOS``
+      event when the last frame has been decoded and all frames are ready to be
+      dequeued. It is a deprecated behavior and the client must not rely on it.
+      The ``V4L2_BUF_FLAG_LAST`` buffer flag should be used instead.
+
+3. Once all the ``OUTPUT`` buffers queued before the ``V4L2_DEC_CMD_STOP`` call
+   are dequeued and the last ``CAPTURE`` buffer is dequeued, the decoder is
+   stopped and it will accept, but not process, any newly queued ``OUTPUT``
+   buffers until the client issues any of the following operations:
+
+   * ``V4L2_DEC_CMD_START`` - the decoder will not be reset and will resume
+     operation normally, with all the state from before the drain,
+
+   * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
+     ``CAPTURE`` queue - the decoder will resume the operation normally,
+     however any ``CAPTURE`` buffers still in the queue will be returned to the
+     client,
+
+   * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
+     ``OUTPUT`` queue - any pending source buffers will be returned to the
+     client and the `Seek` sequence will be triggered.
+
+.. note::
+
+   Once the drain sequence is initiated, the client needs to drive it to
+   completion, as described by the steps above, unless it aborts the process by
+   issuing :c:func:`VIDIOC_STREAMOFF` on any of the ``OUTPUT`` or ``CAPTURE``
+   queues.  The client is not allowed to issue ``V4L2_DEC_CMD_START`` or
+   ``V4L2_DEC_CMD_STOP`` again while the drain sequence is in progress and they
+   will fail with -EBUSY error code if attempted.
+
+   Although mandatory, the availability of decoder commands may be queried
+   using :c:func:`VIDIOC_TRY_DECODER_CMD`.
+
+End of Stream
+=============
+
+If the decoder encounters an end of stream marking in the stream, the decoder
+will initiate the `Drain` sequence, which the client must handle as described
+above, skipping the initial :c:func:`VIDIOC_DECODER_CMD`.
+
+Commit Points
+=============
+
+Setting formats and allocating buffers trigger changes in the behavior of the
+decoder.
+
+1. Setting the format on the ``OUTPUT`` queue may change the set of formats
+   supported/advertised on the ``CAPTURE`` queue. In particular, it also means
+   that the ``CAPTURE`` format may be reset and the client must not rely on the
+   previously set format being preserved.
+
+2. Enumerating formats on the ``CAPTURE`` queue always returns only formats
+   supported for the current ``OUTPUT`` format.
+
+3. Setting the format on the ``CAPTURE`` queue does not change the list of
+   formats available on the ``OUTPUT`` queue. An attempt to set a ``CAPTURE``
+   format that is not supported for the currently selected ``OUTPUT`` format
+   will result in the decoder adjusting the requested ``CAPTURE`` format to a
+   supported one.
+
+4. Enumerating formats on the ``OUTPUT`` queue always returns the full set of
+   supported coded formats, irrespectively of the current ``CAPTURE`` format.
+
+5. While buffers are allocated on any of the ``OUTPUT`` or ``CAPTURE`` queues,
+   the client must not change the format on the ``OUTPUT`` queue. Drivers will
+   return the -EBUSY error code for any such format change attempt.
+
+To summarize, setting formats and allocation must always start with the
+``OUTPUT`` queue and the ``OUTPUT`` queue is the master that governs the
+set of supported formats for the ``CAPTURE`` queue.
diff --git a/Documentation/userspace-api/media/v4l/dev-event.rst b/Documentation/userspace-api/media/v4l/dev-event.rst
new file mode 100644
index 000000000000..d09034fd680a
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-event.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _event:
+
+***************
+Event Interface
+***************
+
+The V4L2 event interface provides a means for a user to get immediately
+notified on certain conditions taking place on a device. This might
+include start of frame or loss of signal events, for example. Changes in
+the value or state of a V4L2 control can also be reported through
+events.
+
+To receive events, the events the user is interested in first must be
+subscribed using the
+:ref:`VIDIOC_SUBSCRIBE_EVENT` ioctl. Once
+an event is subscribed, the events of subscribed types are dequeueable
+using the :ref:`VIDIOC_DQEVENT` ioctl. Events may be
+unsubscribed using VIDIOC_UNSUBSCRIBE_EVENT ioctl. The special event
+type V4L2_EVENT_ALL may be used to unsubscribe all the events the
+driver supports.
+
+The event subscriptions and event queues are specific to file handles.
+Subscribing an event on one file handle does not affect other file
+handles.
+
+The information on dequeueable events is obtained by using select or
+poll system calls on video devices. The V4L2 events use POLLPRI events
+on poll system call and exceptions on select system call.
+
+Starting with kernel 3.1 certain guarantees can be given with regards to
+events:
+
+1. Each subscribed event has its own internal dedicated event queue.
+   This means that flooding of one event type will not interfere with
+   other event types.
+
+2. If the internal event queue for a particular subscribed event becomes
+   full, then the oldest event in that queue will be dropped.
+
+3. Where applicable, certain event types can ensure that the payload of
+   the oldest event that is about to be dropped will be merged with the
+   payload of the next oldest event. Thus ensuring that no information
+   is lost, but only an intermediate step leading up to that
+   information. See the documentation for the event you want to
+   subscribe to whether this is applicable for that event or not.
diff --git a/Documentation/userspace-api/media/v4l/dev-mem2mem.rst b/Documentation/userspace-api/media/v4l/dev-mem2mem.rst
new file mode 100644
index 000000000000..9279d87c08a1
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-mem2mem.rst
@@ -0,0 +1,49 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _mem2mem:
+
+********************************
+Video Memory-To-Memory Interface
+********************************
+
+A V4L2 memory-to-memory device can compress, decompress, transform, or
+otherwise convert video data from one format into another format, in memory.
+Such memory-to-memory devices set the ``V4L2_CAP_VIDEO_M2M`` or
+``V4L2_CAP_VIDEO_M2M_MPLANE`` capability. Examples of memory-to-memory
+devices are codecs, scalers, deinterlacers or format converters (i.e.
+converting from YUV to RGB).
+
+A memory-to-memory video node acts just like a normal video node, but it
+supports both output (sending frames from memory to the hardware)
+and capture (receiving the processed frames from the hardware into
+memory) stream I/O. An application will have to setup the stream I/O for
+both sides and finally call :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`
+for both capture and output to start the hardware.
+
+Memory-to-memory devices function as a shared resource: you can
+open the video node multiple times, each application setting up their
+own properties that are local to the file handle, and each can use
+it independently from the others. The driver will arbitrate access to
+the hardware and reprogram it whenever another file handler gets access.
+This is different from the usual video node behavior where the video
+properties are global to the device (i.e. changing something through one
+file handle is visible through another file handle).
+
+One of the most common memory-to-memory device is the codec. Codecs
+are more complicated than most and require additional setup for
+their codec parameters. This is done through codec controls.
+See :ref:`mpeg-controls`. More details on how to use codec memory-to-memory
+devices are given in the following sections.
+
+.. toctree::
+    :maxdepth: 1
+
+    dev-decoder
+    dev-stateless-decoder
diff --git a/Documentation/userspace-api/media/v4l/dev-meta.rst b/Documentation/userspace-api/media/v4l/dev-meta.rst
new file mode 100644
index 000000000000..6d2c5a79b370
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-meta.rst
@@ -0,0 +1,74 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _metadata:
+
+******************
+Metadata Interface
+******************
+
+Metadata refers to any non-image data that supplements video frames with
+additional information. This may include statistics computed over the image,
+frame capture parameters supplied by the image source or device specific
+parameters for specifying how the device processes images. This interface is
+intended for transfer of metadata between the userspace and the hardware and
+control of that operation.
+
+The metadata interface is implemented on video device nodes. The device can be
+dedicated to metadata or can support both video and metadata as specified in its
+reported capabilities.
+
+Querying Capabilities
+=====================
+
+Device nodes supporting the metadata capture interface set the
+``V4L2_CAP_META_CAPTURE`` flag in the ``device_caps`` field of the
+:c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP`
+ioctl. That flag means the device can capture metadata to memory. Similarly,
+device nodes supporting metadata output interface set the
+``V4L2_CAP_META_OUTPUT`` flag in the ``device_caps`` field of
+:c:type:`v4l2_capability` structure. That flag means the device can read
+metadata from memory.
+
+At least one of the read/write or streaming I/O methods must be supported.
+
+
+Data Format Negotiation
+=======================
+
+The metadata device uses the :ref:`format` ioctls to select the capture format.
+The metadata buffer content format is bound to that selected format. In addition
+to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be
+supported as well.
+
+To use the :ref:`format` ioctls applications set the ``type`` field of the
+:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_META_CAPTURE`` or to
+``V4L2_BUF_TYPE_META_OUTPUT`` and use the :c:type:`v4l2_meta_format` ``meta``
+member of the ``fmt`` union as needed per the desired operation. Both drivers
+and applications must set the remainder of the :c:type:`v4l2_format` structure
+to 0.
+
+.. c:type:: v4l2_meta_format
+
+.. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}|
+
+.. flat-table:: struct v4l2_meta_format
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``dataformat``
+      - The data format, set by the application. This is a little endian
+        :ref:`four character code <v4l2-fourcc>`. V4L2 defines metadata formats
+        in :ref:`meta-formats`.
+    * - __u32
+      - ``buffersize``
+      - Maximum buffer size in bytes required for data. The value is set by the
+        driver.
diff --git a/Documentation/userspace-api/media/v4l/dev-osd.rst b/Documentation/userspace-api/media/v4l/dev-osd.rst
new file mode 100644
index 000000000000..67dc46373a91
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-osd.rst
@@ -0,0 +1,157 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _osd:
+
+******************************
+Video Output Overlay Interface
+******************************
+
+**Also known as On-Screen Display (OSD)**
+
+Some video output devices can overlay a framebuffer image onto the
+outgoing video signal. Applications can set up such an overlay using
+this interface, which borrows structures and ioctls of the
+:ref:`Video Overlay <overlay>` interface.
+
+The OSD function is accessible through the same character special file
+as the :ref:`Video Output <capture>` function.
+
+.. note::
+
+   The default function of such a ``/dev/video`` device is video
+   capturing or output. The OSD function is only available after calling
+   the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
+
+
+Querying Capabilities
+=====================
+
+Devices supporting the *Video Output Overlay* interface set the
+``V4L2_CAP_VIDEO_OUTPUT_OVERLAY`` flag in the ``capabilities`` field of
+struct :c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl.
+
+
+Framebuffer
+===========
+
+Contrary to the *Video Overlay* interface the framebuffer is normally
+implemented on the TV card and not the graphics card. On Linux it is
+accessible as a framebuffer device (``/dev/fbN``). Given a V4L2 device,
+applications can find the corresponding framebuffer device by calling
+the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` ioctl. It returns, amongst
+other information, the physical address of the framebuffer in the
+``base`` field of struct :c:type:`v4l2_framebuffer`.
+The framebuffer device ioctl ``FBIOGET_FSCREENINFO`` returns the same
+address in the ``smem_start`` field of struct
+struct :c:type:`fb_fix_screeninfo`. The ``FBIOGET_FSCREENINFO``
+ioctl and struct :c:type:`fb_fix_screeninfo` are defined in
+the ``linux/fb.h`` header file.
+
+The width and height of the framebuffer depends on the current video
+standard. A V4L2 driver may reject attempts to change the video standard
+(or any other ioctl which would imply a framebuffer size change) with an
+``EBUSY`` error code until all applications closed the framebuffer device.
+
+Example: Finding a framebuffer device for OSD
+---------------------------------------------
+
+.. code-block:: c
+
+    #include <linux/fb.h>
+
+    struct v4l2_framebuffer fbuf;
+    unsigned int i;
+    int fb_fd;
+
+    if (-1 == ioctl(fd, VIDIOC_G_FBUF, &fbuf)) {
+	perror("VIDIOC_G_FBUF");
+	exit(EXIT_FAILURE);
+    }
+
+    for (i = 0; i < 30; i++) {
+	char dev_name[16];
+	struct fb_fix_screeninfo si;
+
+	snprintf(dev_name, sizeof(dev_name), "/dev/fb%u", i);
+
+	fb_fd = open(dev_name, O_RDWR);
+	if (-1 == fb_fd) {
+	    switch (errno) {
+	    case ENOENT: /* no such file */
+	    case ENXIO:  /* no driver */
+		continue;
+
+	    default:
+		perror("open");
+		exit(EXIT_FAILURE);
+	    }
+	}
+
+	if (0 == ioctl(fb_fd, FBIOGET_FSCREENINFO, &si)) {
+	    if (si.smem_start == (unsigned long)fbuf.base)
+		break;
+	} else {
+	    /* Apparently not a framebuffer device. */
+	}
+
+	close(fb_fd);
+	fb_fd = -1;
+    }
+
+    /* fb_fd is the file descriptor of the framebuffer device
+       for the video output overlay, or -1 if no device was found. */
+
+
+Overlay Window and Scaling
+==========================
+
+The overlay is controlled by source and target rectangles. The source
+rectangle selects a subsection of the framebuffer image to be overlaid,
+the target rectangle an area in the outgoing video signal where the
+image will appear. Drivers may or may not support scaling, and arbitrary
+sizes and positions of these rectangles. Further drivers may support any
+(or none) of the clipping/blending methods defined for the
+:ref:`Video Overlay <overlay>` interface.
+
+A struct :c:type:`v4l2_window` defines the size of the
+source rectangle, its position in the framebuffer and the
+clipping/blending method to be used for the overlay. To get the current
+parameters applications set the ``type`` field of a struct
+:c:type:`v4l2_format` to
+``V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY`` and call the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl. The driver fills the
+struct :c:type:`v4l2_window` substructure named ``win``. It is not
+possible to retrieve a previously programmed clipping list or bitmap.
+
+To program the source rectangle applications set the ``type`` field of a
+struct :c:type:`v4l2_format` to
+``V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY``, initialize the ``win``
+substructure and call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
+The driver adjusts the parameters against hardware limits and returns
+the actual parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does. Like :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`,
+the :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl can be used to learn
+about driver capabilities without actually changing driver state. Unlike
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` this also works after the overlay has been enabled.
+
+A struct :c:type:`v4l2_crop` defines the size and position
+of the target rectangle. The scaling factor of the overlay is implied by
+the width and height given in struct :c:type:`v4l2_window`
+and struct :c:type:`v4l2_crop`. The cropping API applies to
+*Video Output* and *Video Output Overlay* devices in the same way as to
+*Video Capture* and *Video Overlay* devices, merely reversing the
+direction of the data flow. For more information see :ref:`crop`.
+
+
+Enabling Overlay
+================
+
+There is no V4L2 ioctl to enable or disable the overlay, however the
+framebuffer interface of the driver may support the ``FBIOBLANK`` ioctl.
diff --git a/Documentation/userspace-api/media/v4l/dev-output.rst b/Documentation/userspace-api/media/v4l/dev-output.rst
new file mode 100644
index 000000000000..e4f2a1d8b0fc
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-output.rst
@@ -0,0 +1,108 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _output:
+
+**********************
+Video Output Interface
+**********************
+
+Video output devices encode stills or image sequences as analog video
+signal. With this interface applications can control the encoding
+process and move images from user space to the driver.
+
+Conventionally V4L2 video output devices are accessed through character
+device special files named ``/dev/video`` and ``/dev/video0`` to
+``/dev/video63`` with major number 81 and minor numbers 0 to 63.
+``/dev/video`` is typically a symbolic link to the preferred video
+device.
+
+.. note:: The same device file names are used also for video capture devices.
+
+
+Querying Capabilities
+=====================
+
+Devices supporting the video output interface set the
+``V4L2_CAP_VIDEO_OUTPUT`` or ``V4L2_CAP_VIDEO_OUTPUT_MPLANE`` flag in
+the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. As secondary device
+functions they may also support the :ref:`raw VBI output <raw-vbi>`
+(``V4L2_CAP_VBI_OUTPUT``) interface. At least one of the read/write or
+streaming I/O methods must be supported. Modulators and audio outputs
+are optional.
+
+
+Supplemental Functions
+======================
+
+Video output devices shall support :ref:`audio output <audio>`,
+:ref:`modulator <tuner>`, :ref:`controls <control>`,
+:ref:`cropping and scaling <crop>` and
+:ref:`streaming parameter <streaming-par>` ioctls as needed. The
+:ref:`video output <video>` ioctls must be supported by all video
+output devices.
+
+
+Image Format Negotiation
+========================
+
+The output is determined by cropping and image format parameters. The
+former select an area of the video picture where the image will appear,
+the latter how images are stored in memory, i. e. in RGB or YUV format,
+the number of bits per pixel or width and height. Together they also
+define how images are scaled in the process.
+
+As usual these parameters are *not* reset at :ref:`open() <func-open>`
+time to permit Unix tool chains, programming a device and then writing
+to it as if it was a plain file. Well written V4L2 applications ensure
+they really get what they want, including cropping and scaling.
+
+Cropping initialization at minimum requires to reset the parameters to
+defaults. An example is given in :ref:`crop`.
+
+To query the current image format applications set the ``type`` field of
+a struct :c:type:`v4l2_format` to
+``V4L2_BUF_TYPE_VIDEO_OUTPUT`` or ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``
+and call the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl with a pointer
+to this structure. Drivers fill the struct
+:c:type:`v4l2_pix_format` ``pix`` or the struct
+:c:type:`v4l2_pix_format_mplane` ``pix_mp``
+member of the ``fmt`` union.
+
+To request different parameters applications set the ``type`` field of a
+struct :c:type:`v4l2_format` as above and initialize all
+fields of the struct :c:type:`v4l2_pix_format`
+``vbi`` member of the ``fmt`` union, or better just modify the results
+of :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, and call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
+ioctl with a pointer to this structure. Drivers may adjust the
+parameters and finally return the actual parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
+does.
+
+Like :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` the :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl
+can be used to learn about hardware limitations without disabling I/O or
+possibly time consuming hardware preparations.
+
+The contents of struct :c:type:`v4l2_pix_format` and
+struct :c:type:`v4l2_pix_format_mplane` are
+discussed in :ref:`pixfmt`. See also the specification of the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctls for
+details. Video output devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
+and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, even if :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ignores all
+requests and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does.
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional.
+
+
+Writing Images
+==============
+
+A video output device may support the :ref:`write() function <rw>`
+and/or streaming (:ref:`memory mapping <mmap>` or
+:ref:`user pointer <userp>`) I/O. See :ref:`io` for details.
diff --git a/Documentation/userspace-api/media/v4l/dev-overlay.rst b/Documentation/userspace-api/media/v4l/dev-overlay.rst
new file mode 100644
index 000000000000..7246d560173d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-overlay.rst
@@ -0,0 +1,328 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _overlay:
+
+***********************
+Video Overlay Interface
+***********************
+
+**Also known as Framebuffer Overlay or Previewing.**
+
+Video overlay devices have the ability to genlock (TV-)video into the
+(VGA-)video signal of a graphics card, or to store captured images
+directly in video memory of a graphics card, typically with clipping.
+This can be considerable more efficient than capturing images and
+displaying them by other means. In the old days when only nuclear power
+plants needed cooling towers this used to be the only way to put live
+video into a window.
+
+Video overlay devices are accessed through the same character special
+files as :ref:`video capture <capture>` devices.
+
+.. note::
+
+   The default function of a ``/dev/video`` device is video
+   capturing. The overlay function is only available after calling
+   the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
+
+The driver may support simultaneous overlay and capturing using the
+read/write and streaming I/O methods. If so, operation at the nominal
+frame rate of the video standard is not guaranteed. Frames may be
+directed away from overlay to capture, or one field may be used for
+overlay and the other for capture if the capture parameters permit this.
+
+Applications should use different file descriptors for capturing and
+overlay. This must be supported by all drivers capable of simultaneous
+capturing and overlay. Optionally these drivers may also permit
+capturing and overlay with a single file descriptor for compatibility
+with V4L and earlier versions of V4L2. [#f1]_
+
+
+Querying Capabilities
+=====================
+
+Devices supporting the video overlay interface set the
+``V4L2_CAP_VIDEO_OVERLAY`` flag in the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. The overlay I/O
+method specified below must be supported. Tuners and audio inputs are
+optional.
+
+
+Supplemental Functions
+======================
+
+Video overlay devices shall support :ref:`audio input <audio>`,
+:ref:`tuner`, :ref:`controls <control>`,
+:ref:`cropping and scaling <crop>` and
+:ref:`streaming parameter <streaming-par>` ioctls as needed. The
+:ref:`video input <video>` and :ref:`video standard <standard>`
+ioctls must be supported by all video overlay devices.
+
+
+Setup
+=====
+
+Before overlay can commence applications must program the driver with
+frame buffer parameters, namely the address and size of the frame buffer
+and the image format, for example RGB 5:6:5. The
+:ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` and
+:ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctls are available to get and
+set these parameters, respectively. The :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctl is
+privileged because it allows to set up DMA into physical memory,
+bypassing the memory protection mechanisms of the kernel. Only the
+superuser can change the frame buffer address and size. Users are not
+supposed to run TV applications as root or with SUID bit set. A small
+helper application with suitable privileges should query the graphics
+system and program the V4L2 driver at the appropriate time.
+
+Some devices add the video overlay to the output signal of the graphics
+card. In this case the frame buffer is not modified by the video device,
+and the frame buffer address and pixel format are not needed by the
+driver. The :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctl is not privileged. An application
+can check for this type of device by calling the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`
+ioctl.
+
+A driver may support any (or none) of five clipping/blending methods:
+
+1. Chroma-keying displays the overlaid image only where pixels in the
+   primary graphics surface assume a certain color.
+
+2. A bitmap can be specified where each bit corresponds to a pixel in
+   the overlaid image. When the bit is set, the corresponding video
+   pixel is displayed, otherwise a pixel of the graphics surface.
+
+3. A list of clipping rectangles can be specified. In these regions *no*
+   video is displayed, so the graphics surface can be seen here.
+
+4. The framebuffer has an alpha channel that can be used to clip or
+   blend the framebuffer with the video.
+
+5. A global alpha value can be specified to blend the framebuffer
+   contents with video images.
+
+When simultaneous capturing and overlay is supported and the hardware
+prohibits different image and frame buffer formats, the format requested
+first takes precedence. The attempt to capture
+(:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`) or overlay
+(:ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`) may fail with an ``EBUSY`` error
+code or return accordingly modified parameters..
+
+
+Overlay Window
+==============
+
+The overlaid image is determined by cropping and overlay window
+parameters. The former select an area of the video picture to capture,
+the latter how images are overlaid and clipped. Cropping initialization
+at minimum requires to reset the parameters to defaults. An example is
+given in :ref:`crop`.
+
+The overlay window is described by a struct
+:c:type:`v4l2_window`. It defines the size of the image,
+its position over the graphics surface and the clipping to be applied.
+To get the current parameters applications set the ``type`` field of a
+struct :c:type:`v4l2_format` to
+``V4L2_BUF_TYPE_VIDEO_OVERLAY`` and call the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl. The driver fills the
+struct :c:type:`v4l2_window` substructure named ``win``. It is not
+possible to retrieve a previously programmed clipping list or bitmap.
+
+To program the overlay window applications set the ``type`` field of a
+struct :c:type:`v4l2_format` to
+``V4L2_BUF_TYPE_VIDEO_OVERLAY``, initialize the ``win`` substructure and
+call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. The driver
+adjusts the parameters against hardware limits and returns the actual
+parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does. Like :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`, the
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl can be used to learn
+about driver capabilities without actually changing driver state. Unlike
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` this also works after the overlay has been enabled.
+
+The scaling factor of the overlaid image is implied by the width and
+height given in struct :c:type:`v4l2_window` and the size
+of the cropping rectangle. For more information see :ref:`crop`.
+
+When simultaneous capturing and overlay is supported and the hardware
+prohibits different image and window sizes, the size requested first
+takes precedence. The attempt to capture or overlay as well
+(:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`) may fail with an ``EBUSY`` error
+code or return accordingly modified parameters.
+
+
+.. c:type:: v4l2_window
+
+struct v4l2_window
+------------------
+
+``struct v4l2_rect w``
+    Size and position of the window relative to the top, left corner of
+    the frame buffer defined with
+    :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`. The window can extend the
+    frame buffer width and height, the ``x`` and ``y`` coordinates can
+    be negative, and it can lie completely outside the frame buffer. The
+    driver clips the window accordingly, or if that is not possible,
+    modifies its size and/or position.
+
+``enum v4l2_field field``
+    Applications set this field to determine which video field shall be
+    overlaid, typically one of ``V4L2_FIELD_ANY`` (0),
+    ``V4L2_FIELD_TOP``, ``V4L2_FIELD_BOTTOM`` or
+    ``V4L2_FIELD_INTERLACED``. Drivers may have to choose a different
+    field order and return the actual setting here.
+
+``__u32 chromakey``
+    When chroma-keying has been negotiated with
+    :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` applications set this field
+    to the desired pixel value for the chroma key. The format is the
+    same as the pixel format of the framebuffer (struct
+    :c:type:`v4l2_framebuffer` ``fmt.pixelformat``
+    field), with bytes in host order. E. g. for
+    :ref:`V4L2_PIX_FMT_BGR24 <V4L2-PIX-FMT-BGR32>` the value should
+    be 0xRRGGBB on a little endian, 0xBBGGRR on a big endian host.
+
+``struct v4l2_clip * clips``
+    When chroma-keying has *not* been negotiated and
+    :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` indicated this capability,
+    applications can set this field to point to an array of clipping
+    rectangles.
+
+    Like the window coordinates w, clipping rectangles are defined
+    relative to the top, left corner of the frame buffer. However
+    clipping rectangles must not extend the frame buffer width and
+    height, and they must not overlap. If possible applications
+    should merge adjacent rectangles. Whether this must create
+    x-y or y-x bands, or the order of rectangles, is not defined. When
+    clip lists are not supported the driver ignores this field. Its
+    contents after calling :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
+    are undefined.
+
+``__u32 clipcount``
+    When the application set the ``clips`` field, this field must
+    contain the number of clipping rectangles in the list. When clip
+    lists are not supported the driver ignores this field, its contents
+    after calling :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` are undefined. When clip lists are
+    supported but no clipping is desired this field must be set to zero.
+
+``void * bitmap``
+    When chroma-keying has *not* been negotiated and
+    :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` indicated this capability,
+    applications can set this field to point to a clipping bit mask.
+
+It must be of the same size as the window, ``w.width`` and ``w.height``.
+Each bit corresponds to a pixel in the overlaid image, which is
+displayed only when the bit is *set*. Pixel coordinates translate to
+bits like:
+
+
+.. code-block:: c
+
+    ((__u8 *) bitmap)[w.width * y + x / 8] & (1 << (x & 7))
+
+where ``0`` ≤ x < ``w.width`` and ``0`` ≤ y <``w.height``. [#f2]_
+
+When a clipping bit mask is not supported the driver ignores this field,
+its contents after calling :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` are
+undefined. When a bit mask is supported but no clipping is desired this
+field must be set to ``NULL``.
+
+Applications need not create a clip list or bit mask. When they pass
+both, or despite negotiating chroma-keying, the results are undefined.
+Regardless of the chosen method, the clipping abilities of the hardware
+may be limited in quantity or quality. The results when these limits are
+exceeded are undefined. [#f3]_
+
+``__u8 global_alpha``
+    The global alpha value used to blend the framebuffer with video
+    images, if global alpha blending has been negotiated
+    (``V4L2_FBUF_FLAG_GLOBAL_ALPHA``, see
+    :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`,
+    :ref:`framebuffer-flags`).
+
+.. note::
+
+   This field was added in Linux 2.6.23, extending the
+   structure. However the :ref:`VIDIOC_[G|S|TRY]_FMT <VIDIOC_G_FMT>`
+   ioctls, which take a pointer to a :c:type:`v4l2_format`
+   parent structure with padding bytes at the end, are not affected.
+
+
+.. c:type:: v4l2_clip
+
+struct v4l2_clip [#f4]_
+-----------------------
+
+``struct v4l2_rect c``
+    Coordinates of the clipping rectangle, relative to the top, left
+    corner of the frame buffer. Only window pixels *outside* all
+    clipping rectangles are displayed.
+
+``struct v4l2_clip * next``
+    Pointer to the next clipping rectangle, ``NULL`` when this is the last
+    rectangle. Drivers ignore this field, it cannot be used to pass a
+    linked list of clipping rectangles.
+
+
+.. c:type:: v4l2_rect
+
+struct v4l2_rect
+----------------
+
+``__s32 left``
+    Horizontal offset of the top, left corner of the rectangle, in
+    pixels.
+
+``__s32 top``
+    Vertical offset of the top, left corner of the rectangle, in pixels.
+    Offsets increase to the right and down.
+
+``__u32 width``
+    Width of the rectangle, in pixels.
+
+``__u32 height``
+    Height of the rectangle, in pixels.
+
+
+Enabling Overlay
+================
+
+To start or stop the frame buffer overlay applications call the
+:ref:`VIDIOC_OVERLAY` ioctl.
+
+.. [#f1]
+   A common application of two file descriptors is the XFree86
+   :ref:`Xv/V4L <xvideo>` interface driver and a V4L2 application.
+   While the X server controls video overlay, the application can take
+   advantage of memory mapping and DMA.
+
+   In the opinion of the designers of this API, no driver writer taking
+   the efforts to support simultaneous capturing and overlay will
+   restrict this ability by requiring a single file descriptor, as in
+   V4L and earlier versions of V4L2. Making this optional means
+   applications depending on two file descriptors need backup routines
+   to be compatible with all drivers, which is considerable more work
+   than using two fds in applications which do not. Also two fd's fit
+   the general concept of one file descriptor for each logical stream.
+   Hence as a complexity trade-off drivers *must* support two file
+   descriptors and *may* support single fd operation.
+
+.. [#f2]
+   Should we require ``w.width`` to be a multiple of eight?
+
+.. [#f3]
+   When the image is written into frame buffer memory it will be
+   undesirable if the driver clips out less pixels than expected,
+   because the application and graphics system are not aware these
+   regions need to be refreshed. The driver should clip out more pixels
+   or not write the image at all.
+
+.. [#f4]
+   The X Window system defines "regions" which are vectors of ``struct
+   BoxRec { short x1, y1, x2, y2; }`` with ``width = x2 - x1`` and
+   ``height = y2 - y1``, so one cannot pass X11 clip lists directly.
diff --git a/Documentation/userspace-api/media/v4l/dev-radio.rst b/Documentation/userspace-api/media/v4l/dev-radio.rst
new file mode 100644
index 000000000000..c0edd7b7d201
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-radio.rst
@@ -0,0 +1,59 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _radio:
+
+***************
+Radio Interface
+***************
+
+This interface is intended for AM and FM (analog) radio receivers and
+transmitters.
+
+Conventionally V4L2 radio devices are accessed through character device
+special files named ``/dev/radio`` and ``/dev/radio0`` to
+``/dev/radio63`` with major number 81 and minor numbers 64 to 127.
+
+
+Querying Capabilities
+=====================
+
+Devices supporting the radio interface set the ``V4L2_CAP_RADIO`` and
+``V4L2_CAP_TUNER`` or ``V4L2_CAP_MODULATOR`` flag in the
+``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. Other combinations of
+capability flags are reserved for future extensions.
+
+
+Supplemental Functions
+======================
+
+Radio devices can support :ref:`controls <control>`, and must support
+the :ref:`tuner or modulator <tuner>` ioctls.
+
+They do not support the video input or output, audio input or output,
+video standard, cropping and scaling, compression and streaming
+parameter, or overlay ioctls. All other ioctls and I/O methods are
+reserved for future extensions.
+
+
+Programming
+===========
+
+Radio devices may have a couple audio controls (as discussed in
+:ref:`control`) such as a volume control, possibly custom controls.
+Further all radio devices have one tuner or modulator (these are
+discussed in :ref:`tuner`) with index number zero to select the radio
+frequency and to determine if a monaural or FM stereo program is
+received/emitted. Drivers switch automatically between AM and FM
+depending on the selected frequency. The
+:ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>` or
+:ref:`VIDIOC_G_MODULATOR <VIDIOC_G_MODULATOR>` ioctl reports the
+supported frequency range.
diff --git a/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst
new file mode 100644
index 000000000000..0307d44e17cb
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst
@@ -0,0 +1,306 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _raw-vbi:
+
+**********************
+Raw VBI Data Interface
+**********************
+
+VBI is an abbreviation of Vertical Blanking Interval, a gap in the
+sequence of lines of an analog video signal. During VBI no picture
+information is transmitted, allowing some time while the electron beam
+of a cathode ray tube TV returns to the top of the screen. Using an
+oscilloscope you will find here the vertical synchronization pulses and
+short data packages ASK modulated [#f1]_ onto the video signal. These are
+transmissions of services such as Teletext or Closed Caption.
+
+Subject of this interface type is raw VBI data, as sampled off a video
+signal, or to be added to a signal for output. The data format is
+similar to uncompressed video images, a number of lines times a number
+of samples per line, we call this a VBI image.
+
+Conventionally V4L2 VBI devices are accessed through character device
+special files named ``/dev/vbi`` and ``/dev/vbi0`` to ``/dev/vbi31``
+with major number 81 and minor numbers 224 to 255. ``/dev/vbi`` is
+typically a symbolic link to the preferred VBI device. This convention
+applies to both input and output devices.
+
+To address the problems of finding related video and VBI devices VBI
+capturing and output is also available as device function under
+``/dev/video``. To capture or output raw VBI data with these devices
+applications must call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
+Accessed as ``/dev/vbi``, raw VBI capturing or output is the default
+device function.
+
+
+Querying Capabilities
+=====================
+
+Devices supporting the raw VBI capturing or output API set the
+``V4L2_CAP_VBI_CAPTURE`` or ``V4L2_CAP_VBI_OUTPUT`` flags, respectively,
+in the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. At least one of the
+read/write, streaming or asynchronous I/O methods must be supported. VBI
+devices may or may not have a tuner or modulator.
+
+
+Supplemental Functions
+======================
+
+VBI devices shall support :ref:`video input or output <video>`,
+:ref:`tuner or modulator <tuner>`, and :ref:`controls <control>`
+ioctls as needed. The :ref:`video standard <standard>` ioctls provide
+information vital to program a VBI device, therefore must be supported.
+
+
+Raw VBI Format Negotiation
+==========================
+
+Raw VBI sampling abilities can vary, in particular the sampling
+frequency. To properly interpret the data V4L2 specifies an ioctl to
+query the sampling parameters. Moreover, to allow for some flexibility
+applications can also suggest different parameters.
+
+As usual these parameters are *not* reset at :ref:`open() <func-open>`
+time to permit Unix tool chains, programming a device and then reading
+from it as if it was a plain file. Well written V4L2 applications should
+always ensure they really get what they want, requesting reasonable
+parameters and then checking if the actual parameters are suitable.
+
+To query the current raw VBI capture parameters applications set the
+``type`` field of a struct :c:type:`v4l2_format` to
+``V4L2_BUF_TYPE_VBI_CAPTURE`` or ``V4L2_BUF_TYPE_VBI_OUTPUT``, and call
+the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl with a pointer to this
+structure. Drivers fill the struct
+:c:type:`v4l2_vbi_format` ``vbi`` member of the
+``fmt`` union.
+
+To request different parameters applications set the ``type`` field of a
+struct :c:type:`v4l2_format` as above and initialize all
+fields of the struct :c:type:`v4l2_vbi_format`
+``vbi`` member of the ``fmt`` union, or better just modify the results
+of :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, and call the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
+ioctl with a pointer to this structure. Drivers return an ``EINVAL`` error
+code only when the given parameters are ambiguous, otherwise they modify
+the parameters according to the hardware capabilities and return the
+actual parameters. When the driver allocates resources at this point, it
+may return an ``EBUSY`` error code to indicate the returned parameters are
+valid but the required resources are currently not available. That may
+happen for instance when the video and VBI areas to capture would
+overlap, or when the driver supports multiple opens and another process
+already requested VBI capturing or output. Anyway, applications must
+expect other resource allocation points which may return ``EBUSY``, at the
+:ref:`VIDIOC_STREAMON` ioctl and the first :ref:`read() <func-read>`
+, :ref:`write() <func-write>` and :ref:`select() <func-select>` calls.
+
+VBI devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, even if :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ignores all requests
+and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does.
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional.
+
+.. tabularcolumns:: |p{1.6cm}|p{4.2cm}|p{11.7cm}|
+
+.. c:type:: v4l2_vbi_format
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_vbi_format
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``sampling_rate``
+      - Samples per second, i. e. unit 1 Hz.
+    * - __u32
+      - ``offset``
+      - Horizontal offset of the VBI image, relative to the leading edge
+	of the line synchronization pulse and counted in samples: The
+	first sample in the VBI image will be located ``offset`` /
+	``sampling_rate`` seconds following the leading edge. See also
+	:ref:`vbi-hsync`.
+    * - __u32
+      - ``samples_per_line``
+      -
+    * - __u32
+      - ``sample_format``
+      - Defines the sample format as in :ref:`pixfmt`, a
+	four-character-code. [#f2]_ Usually this is ``V4L2_PIX_FMT_GREY``,
+	i. e. each sample consists of 8 bits with lower values oriented
+	towards the black level. Do not assume any other correlation of
+	values with the signal level. For example, the MSB does not
+	necessarily indicate if the signal is 'high' or 'low' because 128
+	may not be the mean value of the signal. Drivers shall not convert
+	the sample format by software.
+    * - __u32
+      - ``start``\ [#f2]_
+      - This is the scanning system line number associated with the first
+	line of the VBI image, of the first and the second field
+	respectively. See :ref:`vbi-525` and :ref:`vbi-625` for valid
+	values. The ``V4L2_VBI_ITU_525_F1_START``,
+	``V4L2_VBI_ITU_525_F2_START``, ``V4L2_VBI_ITU_625_F1_START`` and
+	``V4L2_VBI_ITU_625_F2_START`` defines give the start line numbers
+	for each field for each 525 or 625 line format as a convenience.
+	Don't forget that ITU line numbering starts at 1, not 0. VBI input
+	drivers can return start values 0 if the hardware cannot reliable
+	identify scanning lines, VBI acquisition may not require this
+	information.
+    * - __u32
+      - ``count``\ [#f2]_
+      - The number of lines in the first and second field image,
+	respectively.
+    * - :cspan:`2`
+
+	Drivers should be as flexibility as possible. For example, it may
+	be possible to extend or move the VBI capture window down to the
+	picture area, implementing a 'full field mode' to capture data
+	service transmissions embedded in the picture.
+
+	An application can set the first or second ``count`` value to zero
+	if no data is required from the respective field; ``count``\ [1]
+	if the scanning system is progressive, i. e. not interlaced. The
+	corresponding start value shall be ignored by the application and
+	driver. Anyway, drivers may not support single field capturing and
+	return both count values non-zero.
+
+	Both ``count`` values set to zero, or line numbers are outside the
+	bounds depicted\ [#f4]_, or a field image covering lines of two
+	fields, are invalid and shall not be returned by the driver.
+
+	To initialize the ``start`` and ``count`` fields, applications
+	must first determine the current video standard selection. The
+	:ref:`v4l2_std_id <v4l2-std-id>` or the ``framelines`` field
+	of struct :c:type:`v4l2_standard` can be evaluated
+	for this purpose.
+    * - __u32
+      - ``flags``
+      - See :ref:`vbifmt-flags` below. Currently only drivers set flags,
+	applications must set this field to zero.
+    * - __u32
+      - ``reserved``\ [#f2]_
+      - This array is reserved for future extensions. Drivers and
+	applications must set it to zero.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{1.5cm}|p{11.6cm}|
+
+.. _vbifmt-flags:
+
+.. flat-table:: Raw VBI Format Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_VBI_UNSYNC``
+      - 0x0001
+      - This flag indicates hardware which does not properly distinguish
+	between fields. Normally the VBI image stores the first field
+	(lower scanning line numbers) first in memory. This may be a top
+	or bottom field depending on the video standard. When this flag is
+	set the first or second field may be stored first, however the
+	fields are still in correct temporal order with the older field
+	first in memory. [#f3]_
+    * - ``V4L2_VBI_INTERLACED``
+      - 0x0002
+      - By default the two field images will be passed sequentially; all
+	lines of the first field followed by all lines of the second field
+	(compare :ref:`field-order` ``V4L2_FIELD_SEQ_TB`` and
+	``V4L2_FIELD_SEQ_BT``, whether the top or bottom field is first in
+	memory depends on the video standard). When this flag is set, the
+	two fields are interlaced (cf. ``V4L2_FIELD_INTERLACED``). The
+	first line of the first field followed by the first line of the
+	second field, then the two second lines, and so on. Such a layout
+	may be necessary when the hardware has been programmed to capture
+	or output interlaced video images and is unable to separate the
+	fields for VBI capturing at the same time. For simplicity setting
+	this flag implies that both ``count`` values are equal and
+	non-zero.
+
+
+
+.. _vbi-hsync:
+
+.. kernel-figure:: vbi_hsync.svg
+    :alt:   vbi_hsync.svg
+    :align: center
+
+    **Figure 4.1. Line synchronization**
+
+
+.. _vbi-525:
+
+.. kernel-figure:: vbi_525.svg
+    :alt:   vbi_525.svg
+    :align: center
+
+    **Figure 4.2. ITU-R 525 line numbering (M/NTSC and M/PAL)**
+
+.. _vbi-625:
+
+.. kernel-figure:: vbi_625.svg
+    :alt:   vbi_625.svg
+    :align: center
+
+    **Figure 4.3. ITU-R 625 line numbering**
+
+Remember the VBI image format depends on the selected video standard,
+therefore the application must choose a new standard or query the
+current standard first. Attempts to read or write data ahead of format
+negotiation, or after switching the video standard which may invalidate
+the negotiated VBI parameters, should be refused by the driver. A format
+change during active I/O is not permitted.
+
+
+Reading and writing VBI images
+==============================
+
+To assure synchronization with the field number and easier
+implementation, the smallest unit of data passed at a time is one frame,
+consisting of two fields of VBI images immediately following in memory.
+
+The total size of a frame computes as follows:
+
+
+.. code-block:: c
+
+    (count[0] + count[1]) * samples_per_line * sample size in bytes
+
+The sample size is most likely always one byte, applications must check
+the ``sample_format`` field though, to function properly with other
+drivers.
+
+A VBI device may support :ref:`read/write <rw>` and/or streaming
+(:ref:`memory mapping <mmap>` or :ref:`user pointer <userp>`) I/O.
+The latter bears the possibility of synchronizing video and VBI data by
+using buffer timestamps.
+
+Remember the :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` ioctl and the
+first :ref:`read() <func-read>`, :ref:`write() <func-write>` and
+:ref:`select() <func-select>` call can be resource allocation
+points returning an ``EBUSY`` error code if the required hardware resources
+are temporarily unavailable, for example the device is already in use by
+another process.
+
+.. [#f1]
+   ASK: Amplitude-Shift Keying. A high signal level represents a '1'
+   bit, a low level a '0' bit.
+
+.. [#f2]
+   A few devices may be unable to sample VBI data at all but can extend
+   the video capture window to the VBI region.
+
+.. [#f3]
+   Most VBI services transmit on both fields, but some have different
+   semantics depending on the field number. These cannot be reliable
+   decoded or encoded when ``V4L2_VBI_UNSYNC`` is set.
+
+.. [#f4]
+   The valid values ar shown at :ref:`vbi-525` and :ref:`vbi-625`.
diff --git a/Documentation/userspace-api/media/v4l/dev-rds.rst b/Documentation/userspace-api/media/v4l/dev-rds.rst
new file mode 100644
index 000000000000..13dba4a4180c
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-rds.rst
@@ -0,0 +1,191 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _rds:
+
+*************
+RDS Interface
+*************
+
+The Radio Data System transmits supplementary information in binary
+format, for example the station name or travel information, on an
+inaudible audio subcarrier of a radio program. This interface is aimed
+at devices capable of receiving and/or transmitting RDS information.
+
+For more information see the core RDS standard :ref:`iec62106` and the
+RBDS standard :ref:`nrsc4`.
+
+.. note::
+
+   Note that the RBDS standard as is used in the USA is almost
+   identical to the RDS standard. Any RDS decoder/encoder can also handle
+   RBDS. Only some of the fields have slightly different meanings. See the
+   RBDS standard for more information.
+
+The RBDS standard also specifies support for MMBS (Modified Mobile
+Search). This is a proprietary format which seems to be discontinued.
+The RDS interface does not support this format. Should support for MMBS
+(or the so-called 'E blocks' in general) be needed, then please contact
+the linux-media mailing list:
+`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__.
+
+
+Querying Capabilities
+=====================
+
+Devices supporting the RDS capturing API set the
+``V4L2_CAP_RDS_CAPTURE`` flag in the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. Any tuner that
+supports RDS will set the ``V4L2_TUNER_CAP_RDS`` flag in the
+``capability`` field of struct :c:type:`v4l2_tuner`. If the
+driver only passes RDS blocks without interpreting the data the
+``V4L2_TUNER_CAP_RDS_BLOCK_IO`` flag has to be set, see
+:ref:`Reading RDS data <reading-rds-data>`. For future use the flag
+``V4L2_TUNER_CAP_RDS_CONTROLS`` has also been defined. However, a driver
+for a radio tuner with this capability does not yet exist, so if you are
+planning to write such a driver you should discuss this on the
+linux-media mailing list:
+`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__.
+
+Whether an RDS signal is present can be detected by looking at the
+``rxsubchans`` field of struct :c:type:`v4l2_tuner`: the
+``V4L2_TUNER_SUB_RDS`` will be set if RDS data was detected.
+
+Devices supporting the RDS output API set the ``V4L2_CAP_RDS_OUTPUT``
+flag in the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. Any modulator that
+supports RDS will set the ``V4L2_TUNER_CAP_RDS`` flag in the
+``capability`` field of struct
+:c:type:`v4l2_modulator`. In order to enable the RDS
+transmission one must set the ``V4L2_TUNER_SUB_RDS`` bit in the
+``txsubchans`` field of struct
+:c:type:`v4l2_modulator`. If the driver only passes RDS
+blocks without interpreting the data the ``V4L2_TUNER_CAP_RDS_BLOCK_IO``
+flag has to be set. If the tuner is capable of handling RDS entities
+like program identification codes and radio text, the flag
+``V4L2_TUNER_CAP_RDS_CONTROLS`` should be set, see
+:ref:`Writing RDS data <writing-rds-data>` and
+:ref:`FM Transmitter Control Reference <fm-tx-controls>`.
+
+
+.. _reading-rds-data:
+
+Reading RDS data
+================
+
+RDS data can be read from the radio device with the
+:ref:`read() <func-read>` function. The data is packed in groups of
+three bytes.
+
+
+.. _writing-rds-data:
+
+Writing RDS data
+================
+
+RDS data can be written to the radio device with the
+:ref:`write() <func-write>` function. The data is packed in groups of
+three bytes, as follows:
+
+
+RDS datastructures
+==================
+
+
+.. c:type:: v4l2_rds_data
+
+.. tabularcolumns:: |p{2.5cm}|p{2.5cm}|p{12.5cm}|
+
+.. flat-table:: struct v4l2_rds_data
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 5
+
+    * - __u8
+      - ``lsb``
+      - Least Significant Byte of RDS Block
+    * - __u8
+      - ``msb``
+      - Most Significant Byte of RDS Block
+    * - __u8
+      - ``block``
+      - Block description
+
+
+
+.. _v4l2-rds-block:
+
+.. tabularcolumns:: |p{2.9cm}|p{14.6cm}|
+
+.. flat-table:: Block description
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 5
+
+    * - Bits 0-2
+      - Block (aka offset) of the received data.
+    * - Bits 3-5
+      - Deprecated. Currently identical to bits 0-2. Do not use these
+	bits.
+    * - Bit 6
+      - Corrected bit. Indicates that an error was corrected for this data
+	block.
+    * - Bit 7
+      - Error bit. Indicates that an uncorrectable error occurred during
+	reception of this block.
+
+
+
+.. _v4l2-rds-block-codes:
+
+.. tabularcolumns:: |p{6.4cm}|p{2.0cm}|p{1.2cm}|p{7.9cm}|
+
+.. flat-table:: Block defines
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 1 5
+
+    * - V4L2_RDS_BLOCK_MSK
+      -
+      - 7
+      - Mask for bits 0-2 to get the block ID.
+    * - V4L2_RDS_BLOCK_A
+      -
+      - 0
+      - Block A.
+    * - V4L2_RDS_BLOCK_B
+      -
+      - 1
+      - Block B.
+    * - V4L2_RDS_BLOCK_C
+      -
+      - 2
+      - Block C.
+    * - V4L2_RDS_BLOCK_D
+      -
+      - 3
+      - Block D.
+    * - V4L2_RDS_BLOCK_C_ALT
+      -
+      - 4
+      - Block C'.
+    * - V4L2_RDS_BLOCK_INVALID
+      - read-only
+      - 7
+      - An invalid block.
+    * - V4L2_RDS_BLOCK_CORRECTED
+      - read-only
+      - 0x40
+      - A bit error was detected but corrected.
+    * - V4L2_RDS_BLOCK_ERROR
+      - read-only
+      - 0x80
+      - An uncorrectable error occurred.
diff --git a/Documentation/userspace-api/media/v4l/dev-sdr.rst b/Documentation/userspace-api/media/v4l/dev-sdr.rst
new file mode 100644
index 000000000000..c9563bca444e
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-sdr.rst
@@ -0,0 +1,114 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _sdr:
+
+**************************************
+Software Defined Radio Interface (SDR)
+**************************************
+
+SDR is an abbreviation of Software Defined Radio, the radio device which
+uses application software for modulation or demodulation. This interface
+is intended for controlling and data streaming of such devices.
+
+SDR devices are accessed through character device special files named
+``/dev/swradio0`` to ``/dev/swradio255`` with major number 81 and
+dynamically allocated minor numbers 0 to 255.
+
+
+Querying Capabilities
+=====================
+
+Devices supporting the SDR receiver interface set the
+``V4L2_CAP_SDR_CAPTURE`` and ``V4L2_CAP_TUNER`` flag in the
+``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. That flag means the
+device has an Analog to Digital Converter (ADC), which is a mandatory
+element for the SDR receiver.
+
+Devices supporting the SDR transmitter interface set the
+``V4L2_CAP_SDR_OUTPUT`` and ``V4L2_CAP_MODULATOR`` flag in the
+``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. That flag means the
+device has an Digital to Analog Converter (DAC), which is a mandatory
+element for the SDR transmitter.
+
+At least one of the read/write, streaming or asynchronous I/O methods
+must be supported.
+
+
+Supplemental Functions
+======================
+
+SDR devices can support :ref:`controls <control>`, and must support
+the :ref:`tuner` ioctls. Tuner ioctls are used for setting the
+ADC/DAC sampling rate (sampling frequency) and the possible radio
+frequency (RF).
+
+The ``V4L2_TUNER_SDR`` tuner type is used for setting SDR device ADC/DAC
+frequency, and the ``V4L2_TUNER_RF`` tuner type is used for setting
+radio frequency. The tuner index of the RF tuner (if any) must always
+follow the SDR tuner index. Normally the SDR tuner is #0 and the RF
+tuner is #1.
+
+The :ref:`VIDIOC_S_HW_FREQ_SEEK` ioctl is
+not supported.
+
+
+Data Format Negotiation
+=======================
+
+The SDR device uses the :ref:`format` ioctls to select the
+capture and output format. Both the sampling resolution and the data
+streaming format are bound to that selectable format. In addition to the
+basic :ref:`format` ioctls, the
+:ref:`VIDIOC_ENUM_FMT` ioctl must be supported as
+well.
+
+To use the :ref:`format` ioctls applications set the ``type``
+field of a struct :c:type:`v4l2_format` to
+``V4L2_BUF_TYPE_SDR_CAPTURE`` or ``V4L2_BUF_TYPE_SDR_OUTPUT`` and use
+the struct :c:type:`v4l2_sdr_format` ``sdr`` member
+of the ``fmt`` union as needed per the desired operation. Currently
+there is two fields, ``pixelformat`` and ``buffersize``, of struct
+struct :c:type:`v4l2_sdr_format` which are used.
+Content of the ``pixelformat`` is V4L2 FourCC code of the data format.
+The ``buffersize`` field is maximum buffer size in bytes required for
+data transfer, set by the driver in order to inform application.
+
+
+.. c:type:: v4l2_sdr_format
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_sdr_format
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``pixelformat``
+      - The data format or type of compression, set by the application.
+	This is a little endian
+	:ref:`four character code <v4l2-fourcc>`. V4L2 defines SDR
+	formats in :ref:`sdr-formats`.
+    * - __u32
+      - ``buffersize``
+      - Maximum size in bytes required for data. Value is set by the
+	driver.
+    * - __u8
+      - ``reserved[24]``
+      - This array is reserved for future extensions. Drivers and
+	applications must set it to zero.
+
+
+An SDR device may support :ref:`read/write <rw>` and/or streaming
+(:ref:`memory mapping <mmap>` or :ref:`user pointer <userp>`) I/O.
diff --git a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
new file mode 100644
index 000000000000..dd0b6646beb5
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
@@ -0,0 +1,669 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _sliced:
+
+*************************
+Sliced VBI Data Interface
+*************************
+
+VBI stands for Vertical Blanking Interval, a gap in the sequence of
+lines of an analog video signal. During VBI no picture information is
+transmitted, allowing some time while the electron beam of a cathode ray
+tube TV returns to the top of the screen.
+
+Sliced VBI devices use hardware to demodulate data transmitted in the
+VBI. V4L2 drivers shall *not* do this by software, see also the
+:ref:`raw VBI interface <raw-vbi>`. The data is passed as short
+packets of fixed size, covering one scan line each. The number of
+packets per video frame is variable.
+
+Sliced VBI capture and output devices are accessed through the same
+character special files as raw VBI devices. When a driver supports both
+interfaces, the default function of a ``/dev/vbi`` device is *raw* VBI
+capturing or output, and the sliced VBI function is only available after
+calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl as defined
+below. Likewise a ``/dev/video`` device may support the sliced VBI API,
+however the default function here is video capturing or output.
+Different file descriptors must be used to pass raw and sliced VBI data
+simultaneously, if this is supported by the driver.
+
+
+Querying Capabilities
+=====================
+
+Devices supporting the sliced VBI capturing or output API set the
+``V4L2_CAP_SLICED_VBI_CAPTURE`` or ``V4L2_CAP_SLICED_VBI_OUTPUT`` flag
+respectively, in the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl. At least one of the
+read/write, streaming or asynchronous :ref:`I/O methods <io>` must be
+supported. Sliced VBI devices may have a tuner or modulator.
+
+
+Supplemental Functions
+======================
+
+Sliced VBI devices shall support :ref:`video input or output <video>`
+and :ref:`tuner or modulator <tuner>` ioctls if they have these
+capabilities, and they may support :ref:`control` ioctls.
+The :ref:`video standard <standard>` ioctls provide information vital
+to program a sliced VBI device, therefore must be supported.
+
+
+.. _sliced-vbi-format-negotitation:
+
+Sliced VBI Format Negotiation
+=============================
+
+To find out which data services are supported by the hardware
+applications can call the
+:ref:`VIDIOC_G_SLICED_VBI_CAP <VIDIOC_G_SLICED_VBI_CAP>` ioctl.
+All drivers implementing the sliced VBI interface must support this
+ioctl. The results may differ from those of the
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl when the number of VBI
+lines the hardware can capture or output per frame, or the number of
+services it can identify on a given line are limited. For example on PAL
+line 16 the hardware may be able to look for a VPS or Teletext signal,
+but not both at the same time.
+
+To determine the currently selected services applications set the
+``type`` field of struct :c:type:`v4l2_format` to
+``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE`` or
+``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``, and the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl fills the ``fmt.sliced``
+member, a struct
+:c:type:`v4l2_sliced_vbi_format`.
+
+Applications can request different parameters by initializing or
+modifying the ``fmt.sliced`` member and calling the
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with a pointer to the
+struct :c:type:`v4l2_format` structure.
+
+The sliced VBI API is more complicated than the raw VBI API because the
+hardware must be told which VBI service to expect on each scan line. Not
+all services may be supported by the hardware on all lines (this is
+especially true for VBI output where Teletext is often unsupported and
+other services can only be inserted in one specific line). In many
+cases, however, it is sufficient to just set the ``service_set`` field
+to the required services and let the driver fill the ``service_lines``
+array according to hardware capabilities. Only if more precise control
+is needed should the programmer set the ``service_lines`` array
+explicitly.
+
+The :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl modifies the parameters
+according to hardware capabilities. When the driver allocates resources
+at this point, it may return an ``EBUSY`` error code if the required
+resources are temporarily unavailable. Other resource allocation points
+which may return ``EBUSY`` can be the
+:ref:`VIDIOC_STREAMON` ioctl and the first
+:ref:`read() <func-read>`, :ref:`write() <func-write>` and
+:ref:`select() <func-select>` call.
+
+
+.. c:type:: v4l2_sliced_vbi_format
+
+struct v4l2_sliced_vbi_format
+-----------------------------
+
+.. raw:: latex
+
+    \begingroup
+    \scriptsize
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{.85cm}|p{3.3cm}|p{4.4cm}|p{4.4cm}|p{4.4cm}|
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 3 2 2 2
+
+    * - __u32
+      - ``service_set``
+      - :cspan:`2`
+
+	If ``service_set`` is non-zero when passed with
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` or
+	:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>`, the ``service_lines``
+	array will be filled by the driver according to the services
+	specified in this field. For example, if ``service_set`` is
+	initialized with ``V4L2_SLICED_TELETEXT_B | V4L2_SLICED_WSS_625``,
+	a driver for the cx25840 video decoder sets lines 7-22 of both
+	fields [#f1]_ to ``V4L2_SLICED_TELETEXT_B`` and line 23 of the first
+	field to ``V4L2_SLICED_WSS_625``. If ``service_set`` is set to
+	zero, then the values of ``service_lines`` will be used instead.
+
+	On return the driver sets this field to the union of all elements
+	of the returned ``service_lines`` array. It may contain less
+	services than requested, perhaps just one, if the hardware cannot
+	handle more services simultaneously. It may be empty (zero) if
+	none of the requested services are supported by the hardware.
+    * - __u16
+      - ``service_lines``\ [2][24]
+      - :cspan:`2`
+
+	Applications initialize this array with sets of data services the
+	driver shall look for or insert on the respective scan line.
+	Subject to hardware capabilities drivers return the requested set,
+	a subset, which may be just a single service, or an empty set.
+	When the hardware cannot handle multiple services on the same line
+	the driver shall choose one. No assumptions can be made on which
+	service the driver chooses.
+
+	Data services are defined in :ref:`vbi-services2`. Array indices
+	map to ITU-R line numbers\ [#f2]_ as follows:
+    * -
+      -
+      - Element
+      - 525 line systems
+      - 625 line systems
+    * -
+      -
+      - ``service_lines``\ [0][1]
+      - 1
+      - 1
+    * -
+      -
+      - ``service_lines``\ [0][23]
+      - 23
+      - 23
+    * -
+      -
+      - ``service_lines``\ [1][1]
+      - 264
+      - 314
+    * -
+      -
+      - ``service_lines``\ [1][23]
+      - 286
+      - 336
+    * -
+      -
+      - :cspan:`2` Drivers must set ``service_lines`` [0][0] and
+	``service_lines``\ [1][0] to zero. The
+	``V4L2_VBI_ITU_525_F1_START``, ``V4L2_VBI_ITU_525_F2_START``,
+	``V4L2_VBI_ITU_625_F1_START`` and ``V4L2_VBI_ITU_625_F2_START``
+	defines give the start line numbers for each field for each 525 or
+	625 line format as a convenience. Don't forget that ITU line
+	numbering starts at 1, not 0.
+    * - __u32
+      - ``io_size``
+      - :cspan:`2` Maximum number of bytes passed by one
+	:ref:`read() <func-read>` or :ref:`write() <func-write>` call,
+	and the buffer size in bytes for the
+	:ref:`VIDIOC_QBUF` and
+	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. Drivers set this field
+	to the size of struct
+	:c:type:`v4l2_sliced_vbi_data` times the
+	number of non-zero elements in the returned ``service_lines``
+	array (that is the number of lines potentially carrying data).
+    * - __u32
+      - ``reserved``\ [2]
+      - :cspan:`2` This array is reserved for future extensions.
+
+	Applications and drivers must set it to zero.
+
+.. raw:: latex
+
+    \endgroup
+
+.. _vbi-services2:
+
+Sliced VBI services
+-------------------
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{4.1cm}|p{1.1cm}|p{2.4cm}|p{2.0cm}|p{7.3cm}|
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       2 1 1 2 2
+
+    * - Symbol
+      - Value
+      - Reference
+      - Lines, usually
+      - Payload
+    * - ``V4L2_SLICED_TELETEXT_B`` (Teletext System B)
+      - 0x0001
+      - :ref:`ets300706`,
+
+	:ref:`itu653`
+      - PAL/SECAM line 7-22, 320-335 (second field 7-22)
+      - Last 42 of the 45 byte Teletext packet, that is without clock
+	run-in and framing code, lsb first transmitted.
+    * - ``V4L2_SLICED_VPS``
+      - 0x0400
+      - :ref:`ets300231`
+      - PAL line 16
+      - Byte number 3 to 15 according to Figure 9 of ETS 300 231, lsb
+	first transmitted.
+    * - ``V4L2_SLICED_CAPTION_525``
+      - 0x1000
+      - :ref:`cea608`
+      - NTSC line 21, 284 (second field 21)
+      - Two bytes in transmission order, including parity bit, lsb first
+	transmitted.
+    * - ``V4L2_SLICED_WSS_625``
+      - 0x4000
+      - :ref:`itu1119`,
+
+	:ref:`en300294`
+      - PAL/SECAM line 23
+      -
+
+	::
+
+	    Byte         0                 1
+		  msb         lsb  msb           lsb
+	     Bit  7 6 5 4 3 2 1 0  x x 13 12 11 10 9
+    * - ``V4L2_SLICED_VBI_525``
+      - 0x1000
+      - :cspan:`2` Set of services applicable to 525 line systems.
+    * - ``V4L2_SLICED_VBI_625``
+      - 0x4401
+      - :cspan:`2` Set of services applicable to 625 line systems.
+
+.. raw:: latex
+
+    \normalsize
+
+
+Drivers may return an ``EINVAL`` error code when applications attempt to
+read or write data without prior format negotiation, after switching the
+video standard (which may invalidate the negotiated VBI parameters) and
+after switching the video input (which may change the video standard as
+a side effect). The :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl may
+return an ``EBUSY`` error code when applications attempt to change the
+format while i/o is in progress (between a
+:ref:`VIDIOC_STREAMON` and
+:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` call, and after the first
+:ref:`read() <func-read>` or :ref:`write() <func-write>` call).
+
+
+Reading and writing sliced VBI data
+===================================
+
+A single :ref:`read() <func-read>` or :ref:`write() <func-write>`
+call must pass all data belonging to one video frame. That is an array
+of struct :c:type:`v4l2_sliced_vbi_data` structures with one or
+more elements and a total size not exceeding ``io_size`` bytes. Likewise
+in streaming I/O mode one buffer of ``io_size`` bytes must contain data
+of one video frame. The ``id`` of unused
+struct :c:type:`v4l2_sliced_vbi_data` elements must be zero.
+
+
+.. c:type:: v4l2_sliced_vbi_data
+
+struct v4l2_sliced_vbi_data
+---------------------------
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - __u32
+      - ``id``
+      - A flag from :ref:`vbi-services` identifying the type of data in
+	this packet. Only a single bit must be set. When the ``id`` of a
+	captured packet is zero, the packet is empty and the contents of
+	other fields are undefined. Applications shall ignore empty
+	packets. When the ``id`` of a packet for output is zero the
+	contents of the ``data`` field are undefined and the driver must
+	no longer insert data on the requested ``field`` and ``line``.
+    * - __u32
+      - ``field``
+      - The video field number this data has been captured from, or shall
+	be inserted at. ``0`` for the first field, ``1`` for the second
+	field.
+    * - __u32
+      - ``line``
+      - The field (as opposed to frame) line number this data has been
+	captured from, or shall be inserted at. See :ref:`vbi-525` and
+	:ref:`vbi-625` for valid values. Sliced VBI capture devices can
+	set the line number of all packets to ``0`` if the hardware cannot
+	reliably identify scan lines. The field number must always be
+	valid.
+    * - __u32
+      - ``reserved``
+      - This field is reserved for future extensions. Applications and
+	drivers must set it to zero.
+    * - __u8
+      - ``data``\ [48]
+      - The packet payload. See :ref:`vbi-services` for the contents and
+	number of bytes passed for each data type. The contents of padding
+	bytes at the end of this array are undefined, drivers and
+	applications shall ignore them.
+
+
+Packets are always passed in ascending line number order, without
+duplicate line numbers. The :ref:`write() <func-write>` function and
+the :ref:`VIDIOC_QBUF` ioctl must return an ``EINVAL``
+error code when applications violate this rule. They must also return an
+EINVAL error code when applications pass an incorrect field or line
+number, or a combination of ``field``, ``line`` and ``id`` which has not
+been negotiated with the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` or
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. When the line numbers are
+unknown the driver must pass the packets in transmitted order. The
+driver can insert empty packets with ``id`` set to zero anywhere in the
+packet array.
+
+To assure synchronization and to distinguish from frame dropping, when a
+captured frame does not carry any of the requested data services drivers
+must pass one or more empty packets. When an application fails to pass
+VBI data in time for output, the driver must output the last VPS and WSS
+packet again, and disable the output of Closed Caption and Teletext
+data, or output data which is ignored by Closed Caption and Teletext
+decoders.
+
+A sliced VBI device may support :ref:`read/write <rw>` and/or
+streaming (:ref:`memory mapping <mmap>` and/or
+:ref:`user pointer <userp>`) I/O. The latter bears the possibility of
+synchronizing video and VBI data by using buffer timestamps.
+
+
+Sliced VBI Data in MPEG Streams
+===============================
+
+If a device can produce an MPEG output stream, it may be capable of
+providing
+:ref:`negotiated sliced VBI services <sliced-vbi-format-negotitation>`
+as data embedded in the MPEG stream. Users or applications control this
+sliced VBI data insertion with the
+:ref:`V4L2_CID_MPEG_STREAM_VBI_FMT <v4l2-mpeg-stream-vbi-fmt>`
+control.
+
+If the driver does not provide the
+:ref:`V4L2_CID_MPEG_STREAM_VBI_FMT <v4l2-mpeg-stream-vbi-fmt>`
+control, or only allows that control to be set to
+:ref:`V4L2_MPEG_STREAM_VBI_FMT_NONE <v4l2-mpeg-stream-vbi-fmt>`,
+then the device cannot embed sliced VBI data in the MPEG stream.
+
+The
+:ref:`V4L2_CID_MPEG_STREAM_VBI_FMT <v4l2-mpeg-stream-vbi-fmt>`
+control does not implicitly set the device driver to capture nor cease
+capturing sliced VBI data. The control only indicates to embed sliced
+VBI data in the MPEG stream, if an application has negotiated sliced VBI
+service be captured.
+
+It may also be the case that a device can embed sliced VBI data in only
+certain types of MPEG streams: for example in an MPEG-2 PS but not an
+MPEG-2 TS. In this situation, if sliced VBI data insertion is requested,
+the sliced VBI data will be embedded in MPEG stream types when
+supported, and silently omitted from MPEG stream types where sliced VBI
+data insertion is not supported by the device.
+
+The following subsections specify the format of the embedded sliced VBI
+data.
+
+
+MPEG Stream Embedded, Sliced VBI Data Format: NONE
+--------------------------------------------------
+
+The
+:ref:`V4L2_MPEG_STREAM_VBI_FMT_NONE <v4l2-mpeg-stream-vbi-fmt>`
+embedded sliced VBI format shall be interpreted by drivers as a control
+to cease embedding sliced VBI data in MPEG streams. Neither the device
+nor driver shall insert "empty" embedded sliced VBI data packets in the
+MPEG stream when this format is set. No MPEG stream data structures are
+specified for this format.
+
+
+MPEG Stream Embedded, Sliced VBI Data Format: IVTV
+--------------------------------------------------
+
+The
+:ref:`V4L2_MPEG_STREAM_VBI_FMT_IVTV <v4l2-mpeg-stream-vbi-fmt>`
+embedded sliced VBI format, when supported, indicates to the driver to
+embed up to 36 lines of sliced VBI data per frame in an MPEG-2 *Private
+Stream 1 PES* packet encapsulated in an MPEG-2 *Program Pack* in the
+MPEG stream.
+
+*Historical context*: This format specification originates from a
+custom, embedded, sliced VBI data format used by the ``ivtv`` driver.
+This format has already been informally specified in the kernel sources
+in the file ``Documentation/userspace-api/media/drivers/cx2341x-uapi.rst`` . The
+maximum size of the payload and other aspects of this format are driven
+by the CX23415 MPEG decoder's capabilities and limitations with respect
+to extracting, decoding, and displaying sliced VBI data embedded within
+an MPEG stream.
+
+This format's use is *not* exclusive to the ``ivtv`` driver *nor*
+exclusive to CX2341x devices, as the sliced VBI data packet insertion
+into the MPEG stream is implemented in driver software. At least the
+``cx18`` driver provides sliced VBI data insertion into an MPEG-2 PS in
+this format as well.
+
+The following definitions specify the payload of the MPEG-2 *Private
+Stream 1 PES* packets that contain sliced VBI data when
+:ref:`V4L2_MPEG_STREAM_VBI_FMT_IVTV <v4l2-mpeg-stream-vbi-fmt>`
+is set. (The MPEG-2 *Private Stream 1 PES* packet header and
+encapsulating MPEG-2 *Program Pack* header are not detailed here. Please
+refer to the MPEG-2 specifications for details on those packet headers.)
+
+The payload of the MPEG-2 *Private Stream 1 PES* packets that contain
+sliced VBI data is specified by struct
+:c:type:`v4l2_mpeg_vbi_fmt_ivtv`. The
+payload is variable length, depending on the actual number of lines of
+sliced VBI data present in a video frame. The payload may be padded at
+the end with unspecified fill bytes to align the end of the payload to a
+4-byte boundary. The payload shall never exceed 1552 bytes (2 fields
+with 18 lines/field with 43 bytes of data/line and a 4 byte magic
+number).
+
+
+.. c:type:: v4l2_mpeg_vbi_fmt_ivtv
+
+struct v4l2_mpeg_vbi_fmt_ivtv
+-----------------------------
+
+.. tabularcolumns:: |p{1.0cm}|p{3.8cm}|p{1.0cm}|p{11.2cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``magic``\ [4]
+      - A "magic" constant from :ref:`v4l2-mpeg-vbi-fmt-ivtv-magic` that
+	indicates this is a valid sliced VBI data payload and also
+	indicates which member of the anonymous union, ``itv0`` or
+	``ITV0``, to use for the payload data.
+    * - union {
+      - (anonymous)
+    * - struct :c:type:`v4l2_mpeg_vbi_itv0`
+      - ``itv0``
+      - The primary form of the sliced VBI data payload that contains
+	anywhere from 1 to 35 lines of sliced VBI data. Line masks are
+	provided in this form of the payload indicating which VBI lines
+	are provided.
+    * - struct :ref:`v4l2_mpeg_vbi_ITV0 <v4l2-mpeg-vbi-itv0-1>`
+      - ``ITV0``
+      - An alternate form of the sliced VBI data payload used when 36
+	lines of sliced VBI data are present. No line masks are provided
+	in this form of the payload; all valid line mask bits are
+	implcitly set.
+    * - }
+      -
+
+.. _v4l2-mpeg-vbi-fmt-ivtv-magic:
+
+Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field
+-------------------------------------------------------------
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - Defined Symbol
+      - Value
+      - Description
+    * - ``V4L2_MPEG_VBI_IVTV_MAGIC0``
+      - "itv0"
+      - Indicates the ``itv0`` member of the union in struct
+	:c:type:`v4l2_mpeg_vbi_fmt_ivtv` is
+	valid.
+    * - ``V4L2_MPEG_VBI_IVTV_MAGIC1``
+      - "ITV0"
+      - Indicates the ``ITV0`` member of the union in struct
+	:c:type:`v4l2_mpeg_vbi_fmt_ivtv` is
+	valid and that 36 lines of sliced VBI data are present.
+
+
+
+.. c:type:: v4l2_mpeg_vbi_itv0
+
+.. c:type:: v4l2_mpeg_vbi_ITV0
+
+structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0
+-------------------------------------------------
+
+.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __le32
+      - ``linemask``\ [2]
+      - Bitmasks indicating the VBI service lines present. These
+	``linemask`` values are stored in little endian byte order in the
+	MPEG stream. Some reference ``linemask`` bit positions with their
+	corresponding VBI line number and video field are given below.
+	b\ :sub:`0` indicates the least significant bit of a ``linemask``
+	value:
+
+
+
+	::
+
+	    linemask[0] b0:     line  6  first field
+	    linemask[0] b17:    line 23  first field
+	    linemask[0] b18:    line  6  second field
+	    linemask[0] b31:    line 19  second field
+	    linemask[1] b0:     line 20  second field
+	    linemask[1] b3:     line 23  second field
+	    linemask[1] b4-b31: unused and set to 0
+    * - struct
+	:c:type:`v4l2_mpeg_vbi_itv0_line`
+      - ``line``\ [35]
+      - This is a variable length array that holds from 1 to 35 lines of
+	sliced VBI data. The sliced VBI data lines present correspond to
+	the bits set in the ``linemask`` array, starting from b\ :sub:`0`
+	of ``linemask``\ [0] up through b\ :sub:`31` of ``linemask``\ [0],
+	and from b\ :sub:`0` of ``linemask``\ [1] up through b\ :sub:`3` of
+	``linemask``\ [1]. ``line``\ [0] corresponds to the first bit
+	found set in the ``linemask`` array, ``line``\ [1] corresponds to
+	the second bit found set in the ``linemask`` array, etc. If no
+	``linemask`` array bits are set, then ``line``\ [0] may contain
+	one line of unspecified data that should be ignored by
+	applications.
+
+
+
+.. _v4l2-mpeg-vbi-itv0-1:
+
+struct v4l2_mpeg_vbi_ITV0
+-------------------------
+
+.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - struct
+	:c:type:`v4l2_mpeg_vbi_itv0_line`
+      - ``line``\ [36]
+      - A fixed length array of 36 lines of sliced VBI data. ``line``\ [0]
+	through ``line``\ [17] correspond to lines 6 through 23 of the
+	first field. ``line``\ [18] through ``line``\ [35] corresponds to
+	lines 6 through 23 of the second field.
+
+
+
+.. c:type:: v4l2_mpeg_vbi_itv0_line
+
+struct v4l2_mpeg_vbi_itv0_line
+------------------------------
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``id``
+      - A line identifier value from
+	:ref:`ITV0-Line-Identifier-Constants` that indicates the type of
+	sliced VBI data stored on this line.
+    * - __u8
+      - ``data``\ [42]
+      - The sliced VBI data for the line.
+
+
+
+.. _ITV0-Line-Identifier-Constants:
+
+Line Identifiers for struct v4l2_mpeg_vbi_itv0_line id field
+------------------------------------------------------------
+
+.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}|
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - Defined Symbol
+      - Value
+      - Description
+    * - ``V4L2_MPEG_VBI_IVTV_TELETEXT_B``
+      - 1
+      - Refer to :ref:`Sliced VBI services <vbi-services2>` for a
+	description of the line payload.
+    * - ``V4L2_MPEG_VBI_IVTV_CAPTION_525``
+      - 4
+      - Refer to :ref:`Sliced VBI services <vbi-services2>` for a
+	description of the line payload.
+    * - ``V4L2_MPEG_VBI_IVTV_WSS_625``
+      - 5
+      - Refer to :ref:`Sliced VBI services <vbi-services2>` for a
+	description of the line payload.
+    * - ``V4L2_MPEG_VBI_IVTV_VPS``
+      - 7
+      - Refer to :ref:`Sliced VBI services <vbi-services2>` for a
+	description of the line payload.
+
+
+
+.. [#f1]
+   According to :ref:`ETS 300 706 <ets300706>` lines 6-22 of the first
+   field and lines 5-22 of the second field may carry Teletext data.
+
+.. [#f2]
+   See also :ref:`vbi-525` and :ref:`vbi-625`.
diff --git a/Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst b/Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst
new file mode 100644
index 000000000000..4a26646eeec5
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst
@@ -0,0 +1,424 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _stateless_decoder:
+
+**************************************************
+Memory-to-memory Stateless Video Decoder Interface
+**************************************************
+
+A stateless decoder is a decoder that works without retaining any kind of state
+between processed frames. This means that each frame is decoded independently
+of any previous and future frames, and that the client is responsible for
+maintaining the decoding state and providing it to the decoder with each
+decoding request. This is in contrast to the stateful video decoder interface,
+where the hardware and driver maintain the decoding state and all the client
+has to do is to provide the raw encoded stream and dequeue decoded frames in
+display order.
+
+This section describes how user-space ("the client") is expected to communicate
+with stateless decoders in order to successfully decode an encoded stream.
+Compared to stateful codecs, the decoder/client sequence is simpler, but the
+cost of this simplicity is extra complexity in the client which is responsible
+for maintaining a consistent decoding state.
+
+Stateless decoders make use of the :ref:`media-request-api`. A stateless
+decoder must expose the ``V4L2_BUF_CAP_SUPPORTS_REQUESTS`` capability on its
+``OUTPUT`` queue when :c:func:`VIDIOC_REQBUFS` or :c:func:`VIDIOC_CREATE_BUFS`
+are invoked.
+
+Depending on the encoded formats supported by the decoder, a single decoded
+frame may be the result of several decode requests (for instance, H.264 streams
+with multiple slices per frame). Decoders that support such formats must also
+expose the ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` capability on their
+``OUTPUT`` queue.
+
+Querying capabilities
+=====================
+
+1. To enumerate the set of coded formats supported by the decoder, the client
+   calls :c:func:`VIDIOC_ENUM_FMT` on the ``OUTPUT`` queue.
+
+   * The driver must always return the full set of supported ``OUTPUT`` formats,
+     irrespective of the format currently set on the ``CAPTURE`` queue.
+
+   * Simultaneously, the driver must restrain the set of values returned by
+     codec-specific capability controls (such as H.264 profiles) to the set
+     actually supported by the hardware.
+
+2. To enumerate the set of supported raw formats, the client calls
+   :c:func:`VIDIOC_ENUM_FMT` on the ``CAPTURE`` queue.
+
+   * The driver must return only the formats supported for the format currently
+     active on the ``OUTPUT`` queue.
+
+   * Depending on the currently set ``OUTPUT`` format, the set of supported raw
+     formats may depend on the value of some codec-dependent controls.
+     The client is responsible for making sure that these controls are set
+     before querying the ``CAPTURE`` queue. Failure to do so will result in the
+     default values for these controls being used, and a returned set of formats
+     that may not be usable for the media the client is trying to decode.
+
+3. The client may use :c:func:`VIDIOC_ENUM_FRAMESIZES` to detect supported
+   resolutions for a given format, passing desired pixel format in
+   :c:type:`v4l2_frmsizeenum`'s ``pixel_format``.
+
+4. Supported profiles and levels for the current ``OUTPUT`` format, if
+   applicable, may be queried using their respective controls via
+   :c:func:`VIDIOC_QUERYCTRL`.
+
+Initialization
+==============
+
+1. Set the coded format on the ``OUTPUT`` queue via :c:func:`VIDIOC_S_FMT`.
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+     ``pixelformat``
+         a coded pixel format.
+
+     ``width``, ``height``
+         coded width and height parsed from the stream.
+
+     other fields
+         follow standard semantics.
+
+   .. note::
+
+      Changing the ``OUTPUT`` format may change the currently set ``CAPTURE``
+      format. The driver will derive a new ``CAPTURE`` format from the
+      ``OUTPUT`` format being set, including resolution, colorimetry
+      parameters, etc. If the client needs a specific ``CAPTURE`` format,
+      it must adjust it afterwards.
+
+2. Call :c:func:`VIDIOC_S_EXT_CTRLS` to set all the controls (parsed headers,
+   etc.) required by the ``OUTPUT`` format to enumerate the ``CAPTURE`` formats.
+
+3. Call :c:func:`VIDIOC_G_FMT` for ``CAPTURE`` queue to get the format for the
+   destination buffers parsed/decoded from the bytestream.
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+   * **Returned fields:**
+
+     ``width``, ``height``
+         frame buffer resolution for the decoded frames.
+
+     ``pixelformat``
+         pixel format for decoded frames.
+
+     ``num_planes`` (for _MPLANE ``type`` only)
+         number of planes for pixelformat.
+
+     ``sizeimage``, ``bytesperline``
+         as per standard semantics; matching frame buffer format.
+
+   .. note::
+
+      The value of ``pixelformat`` may be any pixel format supported for the
+      ``OUTPUT`` format, based on the hardware capabilities. It is suggested
+      that the driver chooses the preferred/optimal format for the current
+      configuration. For example, a YUV format may be preferred over an RGB
+      format, if an additional conversion step would be required for RGB.
+
+4. *[optional]* Enumerate ``CAPTURE`` formats via :c:func:`VIDIOC_ENUM_FMT` on
+   the ``CAPTURE`` queue. The client may use this ioctl to discover which
+   alternative raw formats are supported for the current ``OUTPUT`` format and
+   select one of them via :c:func:`VIDIOC_S_FMT`.
+
+   .. note::
+
+      The driver will return only formats supported for the currently selected
+      ``OUTPUT`` format and currently set controls, even if more formats may be
+      supported by the decoder in general.
+
+      For example, a decoder may support YUV and RGB formats for
+      resolutions 1920x1088 and lower, but only YUV for higher resolutions (due
+      to hardware limitations). After setting a resolution of 1920x1088 or lower
+      as the ``OUTPUT`` format, :c:func:`VIDIOC_ENUM_FMT` may return a set of
+      YUV and RGB pixel formats, but after setting a resolution higher than
+      1920x1088, the driver will not return RGB pixel formats, since they are
+      unsupported for this resolution.
+
+5. *[optional]* Choose a different ``CAPTURE`` format than suggested via
+   :c:func:`VIDIOC_S_FMT` on ``CAPTURE`` queue. It is possible for the client to
+   choose a different format than selected/suggested by the driver in
+   :c:func:`VIDIOC_G_FMT`.
+
+    * **Required fields:**
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+      ``pixelformat``
+          a raw pixel format.
+
+      ``width``, ``height``
+         frame buffer resolution of the decoded stream; typically unchanged from
+         what was returned with :c:func:`VIDIOC_G_FMT`, but it may be different
+         if the hardware supports composition and/or scaling.
+
+   After performing this step, the client must perform step 3 again in order
+   to obtain up-to-date information about the buffers size and layout.
+
+6. Allocate source (bytestream) buffers via :c:func:`VIDIOC_REQBUFS` on
+   ``OUTPUT`` queue.
+
+    * **Required fields:**
+
+      ``count``
+          requested number of buffers to allocate; greater than zero.
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+      ``memory``
+          follows standard semantics.
+
+    * **Return fields:**
+
+      ``count``
+          actual number of buffers allocated.
+
+    * If required, the driver will adjust ``count`` to be equal or bigger to the
+      minimum of required number of ``OUTPUT`` buffers for the given format and
+      requested count. The client must check this value after the ioctl returns
+      to get the actual number of buffers allocated.
+
+7. Allocate destination (raw format) buffers via :c:func:`VIDIOC_REQBUFS` on the
+   ``CAPTURE`` queue.
+
+    * **Required fields:**
+
+      ``count``
+          requested number of buffers to allocate; greater than zero. The client
+          is responsible for deducing the minimum number of buffers required
+          for the stream to be properly decoded (taking e.g. reference frames
+          into account) and pass an equal or bigger number.
+
+      ``type``
+          a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+      ``memory``
+          follows standard semantics. ``V4L2_MEMORY_USERPTR`` is not supported
+          for ``CAPTURE`` buffers.
+
+    * **Return fields:**
+
+      ``count``
+          adjusted to allocated number of buffers, in case the codec requires
+          more buffers than requested.
+
+    * The driver must adjust count to the minimum of required number of
+      ``CAPTURE`` buffers for the current format, stream configuration and
+      requested count. The client must check this value after the ioctl
+      returns to get the number of buffers allocated.
+
+8. Allocate requests (likely one per ``OUTPUT`` buffer) via
+    :c:func:`MEDIA_IOC_REQUEST_ALLOC` on the media device.
+
+9. Start streaming on both ``OUTPUT`` and ``CAPTURE`` queues via
+    :c:func:`VIDIOC_STREAMON`.
+
+Decoding
+========
+
+For each frame, the client is responsible for submitting at least one request to
+which the following is attached:
+
+* The amount of encoded data expected by the codec for its current
+  configuration, as a buffer submitted to the ``OUTPUT`` queue. Typically, this
+  corresponds to one frame worth of encoded data, but some formats may allow (or
+  require) different amounts per unit.
+* All the metadata needed to decode the submitted encoded data, in the form of
+  controls relevant to the format being decoded.
+
+The amount of data and contents of the source ``OUTPUT`` buffer, as well as the
+controls that must be set on the request, depend on the active coded pixel
+format and might be affected by codec-specific extended controls, as stated in
+documentation of each format.
+
+If there is a possibility that the decoded frame will require one or more
+decode requests after the current one in order to be produced, then the client
+must set the ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag on the ``OUTPUT``
+buffer. This will result in the (potentially partially) decoded ``CAPTURE``
+buffer not being made available for dequeueing, and reused for the next decode
+request if the timestamp of the next ``OUTPUT`` buffer has not changed.
+
+A typical frame would thus be decoded using the following sequence:
+
+1. Queue an ``OUTPUT`` buffer containing one unit of encoded bytestream data for
+   the decoding request, using :c:func:`VIDIOC_QBUF`.
+
+    * **Required fields:**
+
+      ``index``
+          index of the buffer being queued.
+
+      ``type``
+          type of the buffer.
+
+      ``bytesused``
+          number of bytes taken by the encoded data frame in the buffer.
+
+      ``flags``
+          the ``V4L2_BUF_FLAG_REQUEST_FD`` flag must be set. Additionally, if
+          we are not sure that the current decode request is the last one needed
+          to produce a fully decoded frame, then
+          ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` must also be set.
+
+      ``request_fd``
+          must be set to the file descriptor of the decoding request.
+
+      ``timestamp``
+          must be set to a unique value per frame. This value will be propagated
+          into the decoded frame's buffer and can also be used to use this frame
+          as the reference of another. If using multiple decode requests per
+          frame, then the timestamps of all the ``OUTPUT`` buffers for a given
+          frame must be identical. If the timestamp changes, then the currently
+          held ``CAPTURE`` buffer will be made available for dequeuing and the
+          current request will work on a new ``CAPTURE`` buffer.
+
+2. Set the codec-specific controls for the decoding request, using
+   :c:func:`VIDIOC_S_EXT_CTRLS`.
+
+    * **Required fields:**
+
+      ``which``
+          must be ``V4L2_CTRL_WHICH_REQUEST_VAL``.
+
+      ``request_fd``
+          must be set to the file descriptor of the decoding request.
+
+      other fields
+          other fields are set as usual when setting controls. The ``controls``
+          array must contain all the codec-specific controls required to decode
+          a frame.
+
+   .. note::
+
+      It is possible to specify the controls in different invocations of
+      :c:func:`VIDIOC_S_EXT_CTRLS`, or to overwrite a previously set control, as
+      long as ``request_fd`` and ``which`` are properly set. The controls state
+      at the moment of request submission is the one that will be considered.
+
+   .. note::
+
+      The order in which steps 1 and 2 take place is interchangeable.
+
+3. Submit the request by invoking :c:func:`MEDIA_REQUEST_IOC_QUEUE` on the
+   request FD.
+
+    If the request is submitted without an ``OUTPUT`` buffer, or if some of the
+    required controls are missing from the request, then
+    :c:func:`MEDIA_REQUEST_IOC_QUEUE` will return ``-ENOENT``. If more than one
+    ``OUTPUT`` buffer is queued, then it will return ``-EINVAL``.
+    :c:func:`MEDIA_REQUEST_IOC_QUEUE` returning non-zero means that no
+    ``CAPTURE`` buffer will be produced for this request.
+
+``CAPTURE`` buffers must not be part of the request, and are queued
+independently. They are returned in decode order (i.e. the same order as coded
+frames were submitted to the ``OUTPUT`` queue).
+
+Runtime decoding errors are signaled by the dequeued ``CAPTURE`` buffers
+carrying the ``V4L2_BUF_FLAG_ERROR`` flag. If a decoded reference frame has an
+error, then all following decoded frames that refer to it also have the
+``V4L2_BUF_FLAG_ERROR`` flag set, although the decoder will still try to
+produce (likely corrupted) frames.
+
+Buffer management while decoding
+================================
+Contrary to stateful decoders, a stateless decoder does not perform any kind of
+buffer management: it only guarantees that dequeued ``CAPTURE`` buffers can be
+used by the client for as long as they are not queued again. "Used" here
+encompasses using the buffer for compositing or display.
+
+A dequeued capture buffer can also be used as the reference frame of another
+buffer.
+
+A frame is specified as reference by converting its timestamp into nanoseconds,
+and storing it into the relevant member of a codec-dependent control structure.
+The :c:func:`v4l2_timeval_to_ns` function must be used to perform that
+conversion. The timestamp of a frame can be used to reference it as soon as all
+its units of encoded data are successfully submitted to the ``OUTPUT`` queue.
+
+A decoded buffer containing a reference frame must not be reused as a decoding
+target until all the frames referencing it have been decoded. The safest way to
+achieve this is to refrain from queueing a reference buffer until all the
+decoded frames referencing it have been dequeued. However, if the driver can
+guarantee that buffers queued to the ``CAPTURE`` queue are processed in queued
+order, then user-space can take advantage of this guarantee and queue a
+reference buffer when the following conditions are met:
+
+1. All the requests for frames affected by the reference frame have been
+   queued, and
+
+2. A sufficient number of ``CAPTURE`` buffers to cover all the decoded
+   referencing frames have been queued.
+
+When queuing a decoding request, the driver will increase the reference count of
+all the resources associated with reference frames. This means that the client
+can e.g. close the DMABUF file descriptors of reference frame buffers if it
+won't need them afterwards.
+
+Seeking
+=======
+In order to seek, the client just needs to submit requests using input buffers
+corresponding to the new stream position. It must however be aware that
+resolution may have changed and follow the dynamic resolution change sequence in
+that case. Also depending on the codec used, picture parameters (e.g. SPS/PPS
+for H.264) may have changed and the client is responsible for making sure that a
+valid state is sent to the decoder.
+
+The client is then free to ignore any returned ``CAPTURE`` buffer that comes
+from the pre-seek position.
+
+Pausing
+=======
+
+In order to pause, the client can just cease queuing buffers onto the ``OUTPUT``
+queue. Without source bytestream data, there is no data to process and the codec
+will remain idle.
+
+Dynamic resolution change
+=========================
+
+If the client detects a resolution change in the stream, it will need to perform
+the initialization sequence again with the new resolution:
+
+1. If the last submitted request resulted in a ``CAPTURE`` buffer being
+   held by the use of the ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag, then the
+   last frame is not available on the ``CAPTURE`` queue. In this case, a
+   ``V4L2_DEC_CMD_FLUSH`` command shall be sent. This will make the driver
+   dequeue the held ``CAPTURE`` buffer.
+
+2. Wait until all submitted requests have completed and dequeue the
+   corresponding output buffers.
+
+3. Call :c:func:`VIDIOC_STREAMOFF` on both the ``OUTPUT`` and ``CAPTURE``
+   queues.
+
+4. Free all ``CAPTURE`` buffers by calling :c:func:`VIDIOC_REQBUFS` on the
+   ``CAPTURE`` queue with a buffer count of zero.
+
+5. Perform the initialization sequence again (minus the allocation of
+   ``OUTPUT`` buffers), with the new resolution set on the ``OUTPUT`` queue.
+   Note that due to resolution constraints, a different format may need to be
+   picked on the ``CAPTURE`` queue.
+
+Drain
+=====
+
+If the last submitted request resulted in a ``CAPTURE`` buffer being
+held by the use of the ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag, then the
+last frame is not available on the ``CAPTURE`` queue. In this case, a
+``V4L2_DEC_CMD_FLUSH`` command shall be sent. This will make the driver
+dequeue the held ``CAPTURE`` buffer.
+
+After that, in order to drain the stream on a stateless decoder, the client
+just needs to wait until all the submitted requests are completed.
diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst
new file mode 100644
index 000000000000..0c1a5f50ee21
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst
@@ -0,0 +1,503 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _subdev:
+
+********************
+Sub-device Interface
+********************
+
+The complex nature of V4L2 devices, where hardware is often made of
+several integrated circuits that need to interact with each other in a
+controlled way, leads to complex V4L2 drivers. The drivers usually
+reflect the hardware model in software, and model the different hardware
+components as software blocks called sub-devices.
+
+V4L2 sub-devices are usually kernel-only objects. If the V4L2 driver
+implements the media device API, they will automatically inherit from
+media entities. Applications will be able to enumerate the sub-devices
+and discover the hardware topology using the media entities, pads and
+links enumeration API.
+
+In addition to make sub-devices discoverable, drivers can also choose to
+make them directly configurable by applications. When both the
+sub-device driver and the V4L2 device driver support this, sub-devices
+will feature a character device node on which ioctls can be called to
+
+-  query, read and write sub-devices controls
+
+-  subscribe and unsubscribe to events and retrieve them
+
+-  negotiate image formats on individual pads
+
+Sub-device character device nodes, conventionally named
+``/dev/v4l-subdev*``, use major number 81.
+
+
+Controls
+========
+
+Most V4L2 controls are implemented by sub-device hardware. Drivers
+usually merge all controls and expose them through video device nodes.
+Applications can control all sub-devices through a single interface.
+
+Complex devices sometimes implement the same control in different pieces
+of hardware. This situation is common in embedded platforms, where both
+sensors and image processing hardware implement identical functions,
+such as contrast adjustment, white balance or faulty pixels correction.
+As the V4L2 controls API doesn't support several identical controls in a
+single device, all but one of the identical controls are hidden.
+
+Applications can access those hidden controls through the sub-device
+node with the V4L2 control API described in :ref:`control`. The ioctls
+behave identically as when issued on V4L2 device nodes, with the
+exception that they deal only with controls implemented in the
+sub-device.
+
+Depending on the driver, those controls might also be exposed through
+one (or several) V4L2 device nodes.
+
+
+Events
+======
+
+V4L2 sub-devices can notify applications of events as described in
+:ref:`event`. The API behaves identically as when used on V4L2 device
+nodes, with the exception that it only deals with events generated by
+the sub-device. Depending on the driver, those events might also be
+reported on one (or several) V4L2 device nodes.
+
+
+.. _pad-level-formats:
+
+Pad-level Formats
+=================
+
+.. warning::
+
+    Pad-level formats are only applicable to very complex devices that
+    need to expose low-level format configuration to user space. Generic
+    V4L2 applications do *not* need to use the API described in this
+    section.
+
+.. note::
+
+    For the purpose of this section, the term *format* means the
+    combination of media bus data format, frame width and frame height.
+
+Image formats are typically negotiated on video capture and output
+devices using the format and
+:ref:`selection <VIDIOC_SUBDEV_G_SELECTION>` ioctls. The driver is
+responsible for configuring every block in the video pipeline according
+to the requested format at the pipeline input and/or output.
+
+For complex devices, such as often found in embedded systems, identical
+image sizes at the output of a pipeline can be achieved using different
+hardware configurations. One such example is shown on
+:ref:`pipeline-scaling`, where image scaling can be performed on both
+the video sensor and the host image processing hardware.
+
+
+.. _pipeline-scaling:
+
+.. kernel-figure:: pipeline.dot
+    :alt:   pipeline.dot
+    :align: center
+
+    Image Format Negotiation on Pipelines
+
+    High quality and high speed pipeline configuration
+
+
+
+The sensor scaler is usually of less quality than the host scaler, but
+scaling on the sensor is required to achieve higher frame rates.
+Depending on the use case (quality vs. speed), the pipeline must be
+configured differently. Applications need to configure the formats at
+every point in the pipeline explicitly.
+
+Drivers that implement the :ref:`media API <media-controller-intro>`
+can expose pad-level image format configuration to applications. When
+they do, applications can use the
+:ref:`VIDIOC_SUBDEV_G_FMT <VIDIOC_SUBDEV_G_FMT>` and
+:ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctls. to
+negotiate formats on a per-pad basis.
+
+Applications are responsible for configuring coherent parameters on the
+whole pipeline and making sure that connected pads have compatible
+formats. The pipeline is checked for formats mismatch at
+:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` time, and an ``EPIPE`` error
+code is then returned if the configuration is invalid.
+
+Pad-level image format configuration support can be tested by calling
+the :ref:`VIDIOC_SUBDEV_G_FMT` ioctl on pad
+0. If the driver returns an ``EINVAL`` error code pad-level format
+configuration is not supported by the sub-device.
+
+
+Format Negotiation
+------------------
+
+Acceptable formats on pads can (and usually do) depend on a number of
+external parameters, such as formats on other pads, active links, or
+even controls. Finding a combination of formats on all pads in a video
+pipeline, acceptable to both application and driver, can't rely on
+formats enumeration only. A format negotiation mechanism is required.
+
+Central to the format negotiation mechanism are the get/set format
+operations. When called with the ``which`` argument set to
+:ref:`V4L2_SUBDEV_FORMAT_TRY <VIDIOC_SUBDEV_G_FMT>`, the
+:ref:`VIDIOC_SUBDEV_G_FMT <VIDIOC_SUBDEV_G_FMT>` and
+:ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctls operate on
+a set of formats parameters that are not connected to the hardware
+configuration. Modifying those 'try' formats leaves the device state
+untouched (this applies to both the software state stored in the driver
+and the hardware state stored in the device itself).
+
+While not kept as part of the device state, try formats are stored in
+the sub-device file handles. A
+:ref:`VIDIOC_SUBDEV_G_FMT <VIDIOC_SUBDEV_G_FMT>` call will return
+the last try format set *on the same sub-device file handle*. Several
+applications querying the same sub-device at the same time will thus not
+interact with each other.
+
+To find out whether a particular format is supported by the device,
+applications use the
+:ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctl. Drivers
+verify and, if needed, change the requested ``format`` based on device
+requirements and return the possibly modified value. Applications can
+then choose to try a different format or accept the returned value and
+continue.
+
+Formats returned by the driver during a negotiation iteration are
+guaranteed to be supported by the device. In particular, drivers
+guarantee that a returned format will not be further changed if passed
+to an :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` call as-is
+(as long as external parameters, such as formats on other pads or links'
+configuration are not changed).
+
+Drivers automatically propagate formats inside sub-devices. When a try
+or active format is set on a pad, corresponding formats on other pads of
+the same sub-device can be modified by the driver. Drivers are free to
+modify formats as required by the device. However, they should comply
+with the following rules when possible:
+
+-  Formats should be propagated from sink pads to source pads. Modifying
+   a format on a source pad should not modify the format on any sink
+   pad.
+
+-  Sub-devices that scale frames using variable scaling factors should
+   reset the scale factors to default values when sink pads formats are
+   modified. If the 1:1 scaling ratio is supported, this means that
+   source pads formats should be reset to the sink pads formats.
+
+Formats are not propagated across links, as that would involve
+propagating them from one sub-device file handle to another.
+Applications must then take care to configure both ends of every link
+explicitly with compatible formats. Identical formats on the two ends of
+a link are guaranteed to be compatible. Drivers are free to accept
+different formats matching device requirements as being compatible.
+
+:ref:`sample-pipeline-config` shows a sample configuration sequence
+for the pipeline described in :ref:`pipeline-scaling` (table columns
+list entity names and pad numbers).
+
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{2.0cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|
+
+.. _sample-pipeline-config:
+
+.. flat-table:: Sample Pipeline Configuration
+    :header-rows:  1
+    :stub-columns: 0
+    :widths: 5 5 5 5 5 5 5
+
+    * -
+      - Sensor/0
+
+        format
+      - Frontend/0
+
+        format
+      - Frontend/1
+
+        format
+      - Scaler/0
+
+        format
+      - Scaler/0
+
+        compose selection rectangle
+      - Scaler/1
+
+        format
+    * - Initial state
+      - 2048x1536
+
+        SGRBG8_1X8
+      - (default)
+      - (default)
+      - (default)
+      - (default)
+      - (default)
+    * - Configure frontend sink format
+      - 2048x1536
+
+        SGRBG8_1X8
+      - *2048x1536*
+
+        *SGRBG8_1X8*
+      - *2046x1534*
+
+        *SGRBG8_1X8*
+      - (default)
+      - (default)
+      - (default)
+    * - Configure scaler sink format
+      - 2048x1536
+
+        SGRBG8_1X8
+      - 2048x1536
+
+        SGRBG8_1X8
+      - 2046x1534
+
+        SGRBG8_1X8
+      - *2046x1534*
+
+        *SGRBG8_1X8*
+      - *0,0/2046x1534*
+      - *2046x1534*
+
+        *SGRBG8_1X8*
+    * - Configure scaler sink compose selection
+      - 2048x1536
+
+        SGRBG8_1X8
+      - 2048x1536
+
+        SGRBG8_1X8
+      - 2046x1534
+
+        SGRBG8_1X8
+      - 2046x1534
+
+        SGRBG8_1X8
+      - *0,0/1280x960*
+      - *1280x960*
+
+        *SGRBG8_1X8*
+
+.. raw:: latex
+
+    \normalsize
+
+1. Initial state. The sensor source pad format is set to its native 3MP
+   size and V4L2_MBUS_FMT_SGRBG8_1X8 media bus code. Formats on the
+   host frontend and scaler sink and source pads have the default
+   values, as well as the compose rectangle on the scaler's sink pad.
+
+2. The application configures the frontend sink pad format's size to
+   2048x1536 and its media bus code to V4L2_MBUS_FMT_SGRBG_1X8. The
+   driver propagates the format to the frontend source pad.
+
+3. The application configures the scaler sink pad format's size to
+   2046x1534 and the media bus code to V4L2_MBUS_FMT_SGRBG_1X8 to
+   match the frontend source size and media bus code. The media bus code
+   on the sink pad is set to V4L2_MBUS_FMT_SGRBG_1X8. The driver
+   propagates the size to the compose selection rectangle on the
+   scaler's sink pad, and the format to the scaler source pad.
+
+4. The application configures the size of the compose selection
+   rectangle of the scaler's sink pad 1280x960. The driver propagates
+   the size to the scaler's source pad format.
+
+When satisfied with the try results, applications can set the active
+formats by setting the ``which`` argument to
+``V4L2_SUBDEV_FORMAT_ACTIVE``. Active formats are changed exactly as try
+formats by drivers. To avoid modifying the hardware state during format
+negotiation, applications should negotiate try formats first and then
+modify the active settings using the try formats returned during the
+last negotiation iteration. This guarantees that the active format will
+be applied as-is by the driver without being modified.
+
+
+.. _v4l2-subdev-selections:
+
+Selections: cropping, scaling and composition
+---------------------------------------------
+
+Many sub-devices support cropping frames on their input or output pads
+(or possible even on both). Cropping is used to select the area of
+interest in an image, typically on an image sensor or a video decoder.
+It can also be used as part of digital zoom implementations to select
+the area of the image that will be scaled up.
+
+Crop settings are defined by a crop rectangle and represented in a
+struct :c:type:`v4l2_rect` by the coordinates of the top
+left corner and the rectangle size. Both the coordinates and sizes are
+expressed in pixels.
+
+As for pad formats, drivers store try and active rectangles for the
+selection targets :ref:`v4l2-selections-common`.
+
+On sink pads, cropping is applied relative to the current pad format.
+The pad format represents the image size as received by the sub-device
+from the previous block in the pipeline, and the crop rectangle
+represents the sub-image that will be transmitted further inside the
+sub-device for processing.
+
+The scaling operation changes the size of the image by scaling it to new
+dimensions. The scaling ratio isn't specified explicitly, but is implied
+from the original and scaled image sizes. Both sizes are represented by
+struct :c:type:`v4l2_rect`.
+
+Scaling support is optional. When supported by a subdev, the crop
+rectangle on the subdev's sink pad is scaled to the size configured
+using the
+:ref:`VIDIOC_SUBDEV_S_SELECTION <VIDIOC_SUBDEV_G_SELECTION>` IOCTL
+using ``V4L2_SEL_TGT_COMPOSE`` selection target on the same pad. If the
+subdev supports scaling but not composing, the top and left values are
+not used and must always be set to zero.
+
+On source pads, cropping is similar to sink pads, with the exception
+that the source size from which the cropping is performed, is the
+COMPOSE rectangle on the sink pad. In both sink and source pads, the
+crop rectangle must be entirely contained inside the source image size
+for the crop operation.
+
+The drivers should always use the closest possible rectangle the user
+requests on all selection targets, unless specifically told otherwise.
+``V4L2_SEL_FLAG_GE`` and ``V4L2_SEL_FLAG_LE`` flags may be used to round
+the image size either up or down. :ref:`v4l2-selection-flags`
+
+
+Types of selection targets
+--------------------------
+
+
+Actual targets
+^^^^^^^^^^^^^^
+
+Actual targets (without a postfix) reflect the actual hardware
+configuration at any point of time. There is a BOUNDS target
+corresponding to every actual target.
+
+
+BOUNDS targets
+^^^^^^^^^^^^^^
+
+BOUNDS targets is the smallest rectangle that contains all valid actual
+rectangles. It may not be possible to set the actual rectangle as large
+as the BOUNDS rectangle, however. This may be because e.g. a sensor's
+pixel array is not rectangular but cross-shaped or round. The maximum
+size may also be smaller than the BOUNDS rectangle.
+
+
+Order of configuration and format propagation
+---------------------------------------------
+
+Inside subdevs, the order of image processing steps will always be from
+the sink pad towards the source pad. This is also reflected in the order
+in which the configuration must be performed by the user: the changes
+made will be propagated to any subsequent stages. If this behaviour is
+not desired, the user must set ``V4L2_SEL_FLAG_KEEP_CONFIG`` flag. This
+flag causes no propagation of the changes are allowed in any
+circumstances. This may also cause the accessed rectangle to be adjusted
+by the driver, depending on the properties of the underlying hardware.
+
+The coordinates to a step always refer to the actual size of the
+previous step. The exception to this rule is the sink compose
+rectangle, which refers to the sink compose bounds rectangle --- if it
+is supported by the hardware.
+
+1. Sink pad format. The user configures the sink pad format. This format
+   defines the parameters of the image the entity receives through the
+   pad for further processing.
+
+2. Sink pad actual crop selection. The sink pad crop defines the crop
+   performed to the sink pad format.
+
+3. Sink pad actual compose selection. The size of the sink pad compose
+   rectangle defines the scaling ratio compared to the size of the sink
+   pad crop rectangle. The location of the compose rectangle specifies
+   the location of the actual sink compose rectangle in the sink compose
+   bounds rectangle.
+
+4. Source pad actual crop selection. Crop on the source pad defines crop
+   performed to the image in the sink compose bounds rectangle.
+
+5. Source pad format. The source pad format defines the output pixel
+   format of the subdev, as well as the other parameters with the
+   exception of the image width and height. Width and height are defined
+   by the size of the source pad actual crop selection.
+
+Accessing any of the above rectangles not supported by the subdev will
+return ``EINVAL``. Any rectangle referring to a previous unsupported
+rectangle coordinates will instead refer to the previous supported
+rectangle. For example, if sink crop is not supported, the compose
+selection will refer to the sink pad format dimensions instead.
+
+
+.. _subdev-image-processing-crop:
+
+.. kernel-figure:: subdev-image-processing-crop.svg
+    :alt:   subdev-image-processing-crop.svg
+    :align: center
+
+    **Figure 4.5. Image processing in subdevs: simple crop example**
+
+In the above example, the subdev supports cropping on its sink pad. To
+configure it, the user sets the media bus format on the subdev's sink
+pad. Now the actual crop rectangle can be set on the sink pad --- the
+location and size of this rectangle reflect the location and size of a
+rectangle to be cropped from the sink format. The size of the sink crop
+rectangle will also be the size of the format of the subdev's source
+pad.
+
+
+.. _subdev-image-processing-scaling-multi-source:
+
+.. kernel-figure:: subdev-image-processing-scaling-multi-source.svg
+    :alt:   subdev-image-processing-scaling-multi-source.svg
+    :align: center
+
+    **Figure 4.6. Image processing in subdevs: scaling with multiple sources**
+
+In this example, the subdev is capable of first cropping, then scaling
+and finally cropping for two source pads individually from the resulting
+scaled image. The location of the scaled image in the cropped image is
+ignored in sink compose target. Both of the locations of the source crop
+rectangles refer to the sink scaling rectangle, independently cropping
+an area at location specified by the source crop rectangle from it.
+
+
+.. _subdev-image-processing-full:
+
+.. kernel-figure:: subdev-image-processing-full.svg
+    :alt:    subdev-image-processing-full.svg
+    :align:  center
+
+    **Figure 4.7. Image processing in subdevs: scaling and composition with multiple sinks and sources**
+
+The subdev driver supports two sink pads and two source pads. The images
+from both of the sink pads are individually cropped, then scaled and
+further composed on the composition bounds rectangle. From that, two
+independent streams are cropped and sent out of the subdev from the
+source pads.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    subdev-formats
diff --git a/Documentation/userspace-api/media/v4l/dev-touch.rst b/Documentation/userspace-api/media/v4l/dev-touch.rst
new file mode 100644
index 000000000000..c1ce446274f2
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-touch.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _touch:
+
+*************
+Touch Devices
+*************
+
+Touch devices are accessed through character device special files named
+``/dev/v4l-touch0`` to ``/dev/v4l-touch255`` with major number 81 and
+dynamically allocated minor numbers 0 to 255.
+
+Overview
+========
+
+Sensors may be Optical, or Projected Capacitive touch (PCT).
+
+Processing is required to analyse the raw data and produce input events. In
+some systems, this may be performed on the ASIC and the raw data is purely a
+side-channel for diagnostics or tuning. In other systems, the ASIC is a simple
+analogue front end device which delivers touch data at high rate, and any touch
+processing must be done on the host.
+
+For capacitive touch sensing, the touchscreen is composed of an array of
+horizontal and vertical conductors (alternatively called rows/columns, X/Y
+lines, or tx/rx). Mutual Capacitance measured is at the nodes where the
+conductors cross. Alternatively, Self Capacitance measures the signal from each
+column and row independently.
+
+A touch input may be determined by comparing the raw capacitance measurement to
+a no-touch reference (or "baseline") measurement:
+
+Delta = Raw - Reference
+
+The reference measurement takes account of variations in the capacitance across
+the touch sensor matrix, for example manufacturing irregularities,
+environmental or edge effects.
+
+Querying Capabilities
+=====================
+
+Devices supporting the touch interface set the ``V4L2_CAP_VIDEO_CAPTURE`` flag
+and the ``V4L2_CAP_TOUCH`` flag in the ``capabilities`` field of
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl.
+
+At least one of the read/write or streaming I/O methods must be
+supported.
+
+The formats supported by touch devices are documented in
+:ref:`Touch Formats <tch-formats>`.
+
+Data Format Negotiation
+=======================
+
+A touch device may support any I/O method.
diff --git a/Documentation/userspace-api/media/v4l/devices.rst b/Documentation/userspace-api/media/v4l/devices.rst
new file mode 100644
index 000000000000..47ffe90753dd
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/devices.rst
@@ -0,0 +1,33 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _devices:
+
+**********
+Interfaces
+**********
+
+
+.. toctree::
+    :maxdepth: 1
+
+    dev-capture
+    dev-overlay
+    dev-output
+    dev-osd
+    dev-mem2mem
+    dev-raw-vbi
+    dev-sliced-vbi
+    dev-radio
+    dev-rds
+    dev-sdr
+    dev-touch
+    dev-event
+    dev-subdev
+    dev-meta
diff --git a/Documentation/userspace-api/media/v4l/diff-v4l.rst b/Documentation/userspace-api/media/v4l/diff-v4l.rst
new file mode 100644
index 000000000000..37644d26c4ae
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/diff-v4l.rst
@@ -0,0 +1,693 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _diff-v4l:
+
+********************************
+Differences between V4L and V4L2
+********************************
+
+The Video For Linux API was first introduced in Linux 2.1 to unify and
+replace various TV and radio device related interfaces, developed
+independently by driver writers in prior years. Starting with Linux 2.5
+the much improved V4L2 API replaces the V4L API. The support for the old
+V4L calls were removed from Kernel, but the library :ref:`libv4l`
+supports the conversion of a V4L API system call into a V4L2 one.
+
+
+Opening and Closing Devices
+===========================
+
+For compatibility reasons the character device file names recommended
+for V4L2 video capture, overlay, radio and raw vbi capture devices did
+not change from those used by V4L. They are listed in :ref:`devices`
+and below in :ref:`v4l-dev`.
+
+The teletext devices (minor range 192-223) have been removed in V4L2 and
+no longer exist. There is no hardware available anymore for handling
+pure teletext. Instead raw or sliced VBI is used.
+
+The V4L ``videodev`` module automatically assigns minor numbers to
+drivers in load order, depending on the registered device type. We
+recommend that V4L2 drivers by default register devices with the same
+numbers, but the system administrator can assign arbitrary minor numbers
+using driver module options. The major device number remains 81.
+
+
+.. _v4l-dev:
+
+.. flat-table:: V4L Device Types, Names and Numbers
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Device Type
+      - File Name
+      - Minor Numbers
+    * - Video capture and overlay
+      - ``/dev/video`` and ``/dev/bttv0``\  [#f1]_, ``/dev/video0`` to
+	``/dev/video63``
+      - 0-63
+    * - Radio receiver
+      - ``/dev/radio``\  [#f2]_, ``/dev/radio0`` to ``/dev/radio63``
+      - 64-127
+    * - Raw VBI capture
+      - ``/dev/vbi``, ``/dev/vbi0`` to ``/dev/vbi31``
+      - 224-255
+
+
+V4L prohibits (or used to prohibit) multiple opens of a device file.
+V4L2 drivers *may* support multiple opens, see :ref:`open` for details
+and consequences.
+
+V4L drivers respond to V4L2 ioctls with an ``EINVAL`` error code.
+
+
+Querying Capabilities
+=====================
+
+The V4L ``VIDIOCGCAP`` ioctl is equivalent to V4L2's
+:ref:`VIDIOC_QUERYCAP`.
+
+The ``name`` field in struct ``video_capability`` became
+``card`` in struct :c:type:`v4l2_capability`, ``type``
+was replaced by ``capabilities``. Note V4L2 does not distinguish between
+device types like this, better think of basic video input, video output
+and radio devices supporting a set of related functions like video
+capturing, video overlay and VBI capturing. See :ref:`open` for an
+introduction.
+
+.. tabularcolumns:: |p{5.5cm}|p{6.5cm}|p{5.5cm}
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - ``struct video_capability`` ``type``
+      - struct :c:type:`v4l2_capability`
+	``capabilities`` flags
+      - Purpose
+    * - ``VID_TYPE_CAPTURE``
+      - ``V4L2_CAP_VIDEO_CAPTURE``
+      - The :ref:`video capture <capture>` interface is supported.
+    * - ``VID_TYPE_TUNER``
+      - ``V4L2_CAP_TUNER``
+      - The device has a :ref:`tuner or modulator <tuner>`.
+    * - ``VID_TYPE_TELETEXT``
+      - ``V4L2_CAP_VBI_CAPTURE``
+      - The :ref:`raw VBI capture <raw-vbi>` interface is supported.
+    * - ``VID_TYPE_OVERLAY``
+      - ``V4L2_CAP_VIDEO_OVERLAY``
+      - The :ref:`video overlay <overlay>` interface is supported.
+    * - ``VID_TYPE_CHROMAKEY``
+      - ``V4L2_FBUF_CAP_CHROMAKEY`` in field ``capability`` of struct
+	:c:type:`v4l2_framebuffer`
+      - Whether chromakey overlay is supported. For more information on
+	overlay see :ref:`overlay`.
+    * - ``VID_TYPE_CLIPPING``
+      - ``V4L2_FBUF_CAP_LIST_CLIPPING`` and
+	``V4L2_FBUF_CAP_BITMAP_CLIPPING`` in field ``capability`` of
+	struct :c:type:`v4l2_framebuffer`
+      - Whether clipping the overlaid image is supported, see
+	:ref:`overlay`.
+    * - ``VID_TYPE_FRAMERAM``
+      - ``V4L2_FBUF_CAP_EXTERNOVERLAY`` *not set* in field ``capability``
+	of struct :c:type:`v4l2_framebuffer`
+      - Whether overlay overwrites frame buffer memory, see
+	:ref:`overlay`.
+    * - ``VID_TYPE_SCALES``
+      - ``-``
+      - This flag indicates if the hardware can scale images. The V4L2 API
+	implies the scale factor by setting the cropping dimensions and
+	image size with the :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` and
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, respectively. The
+	driver returns the closest sizes possible. For more information on
+	cropping and scaling see :ref:`crop`.
+    * - ``VID_TYPE_MONOCHROME``
+      - ``-``
+      - Applications can enumerate the supported image formats with the
+	:ref:`VIDIOC_ENUM_FMT` ioctl to determine if
+	the device supports grey scale capturing only. For more
+	information on image formats see :ref:`pixfmt`.
+    * - ``VID_TYPE_SUBCAPTURE``
+      - ``-``
+      - Applications can call the :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>`
+	ioctl to determine if the device supports capturing a subsection
+	of the full picture ("cropping" in V4L2). If not, the ioctl
+	returns the ``EINVAL`` error code. For more information on cropping
+	and scaling see :ref:`crop`.
+    * - ``VID_TYPE_MPEG_DECODER``
+      - ``-``
+      - Applications can enumerate the supported image formats with the
+	:ref:`VIDIOC_ENUM_FMT` ioctl to determine if
+	the device supports MPEG streams.
+    * - ``VID_TYPE_MPEG_ENCODER``
+      - ``-``
+      - See above.
+    * - ``VID_TYPE_MJPEG_DECODER``
+      - ``-``
+      - See above.
+    * - ``VID_TYPE_MJPEG_ENCODER``
+      - ``-``
+      - See above.
+
+
+The ``audios`` field was replaced by ``capabilities`` flag
+``V4L2_CAP_AUDIO``, indicating *if* the device has any audio inputs or
+outputs. To determine their number applications can enumerate audio
+inputs with the :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` ioctl. The
+audio ioctls are described in :ref:`audio`.
+
+The ``maxwidth``, ``maxheight``, ``minwidth`` and ``minheight`` fields
+were removed. Calling the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` or
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl with the desired
+dimensions returns the closest size possible, taking into account the
+current video standard, cropping and scaling limitations.
+
+
+Video Sources
+=============
+
+V4L provides the ``VIDIOCGCHAN`` and ``VIDIOCSCHAN`` ioctl using struct
+``video_channel`` to enumerate the video inputs of a V4L
+device. The equivalent V4L2 ioctls are
+:ref:`VIDIOC_ENUMINPUT`,
+:ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` and
+:ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` using struct
+:c:type:`v4l2_input` as discussed in :ref:`video`.
+
+The ``channel`` field counting inputs was renamed to ``index``, the
+video input types were renamed as follows:
+
+
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - struct ``video_channel`` ``type``
+      - struct :c:type:`v4l2_input` ``type``
+    * - ``VIDEO_TYPE_TV``
+      - ``V4L2_INPUT_TYPE_TUNER``
+    * - ``VIDEO_TYPE_CAMERA``
+      - ``V4L2_INPUT_TYPE_CAMERA``
+
+
+Unlike the ``tuners`` field expressing the number of tuners of this
+input, V4L2 assumes each video input is connected to at most one tuner.
+However a tuner can have more than one input, i. e. RF connectors, and a
+device can have multiple tuners. The index number of the tuner
+associated with the input, if any, is stored in field ``tuner`` of
+struct :c:type:`v4l2_input`. Enumeration of tuners is
+discussed in :ref:`tuner`.
+
+The redundant ``VIDEO_VC_TUNER`` flag was dropped. Video inputs
+associated with a tuner are of type ``V4L2_INPUT_TYPE_TUNER``. The
+``VIDEO_VC_AUDIO`` flag was replaced by the ``audioset`` field. V4L2
+considers devices with up to 32 audio inputs. Each set bit in the
+``audioset`` field represents one audio input this video input combines
+with. For information about audio inputs and how to switch between them
+see :ref:`audio`.
+
+The ``norm`` field describing the supported video standards was replaced
+by ``std``. The V4L specification mentions a flag ``VIDEO_VC_NORM``
+indicating whether the standard can be changed. This flag was a later
+addition together with the ``norm`` field and has been removed in the
+meantime. V4L2 has a similar, albeit more comprehensive approach to
+video standards, see :ref:`standard` for more information.
+
+
+Tuning
+======
+
+The V4L ``VIDIOCGTUNER`` and ``VIDIOCSTUNER`` ioctl and struct
+``video_tuner`` can be used to enumerate the tuners of a
+V4L TV or radio device. The equivalent V4L2 ioctls are
+:ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>` and
+:ref:`VIDIOC_S_TUNER <VIDIOC_G_TUNER>` using struct
+:c:type:`v4l2_tuner`. Tuners are covered in :ref:`tuner`.
+
+The ``tuner`` field counting tuners was renamed to ``index``. The fields
+``name``, ``rangelow`` and ``rangehigh`` remained unchanged.
+
+The ``VIDEO_TUNER_PAL``, ``VIDEO_TUNER_NTSC`` and ``VIDEO_TUNER_SECAM``
+flags indicating the supported video standards were dropped. This
+information is now contained in the associated struct
+:c:type:`v4l2_input`. No replacement exists for the
+``VIDEO_TUNER_NORM`` flag indicating whether the video standard can be
+switched. The ``mode`` field to select a different video standard was
+replaced by a whole new set of ioctls and structures described in
+:ref:`standard`. Due to its ubiquity it should be mentioned the BTTV
+driver supports several standards in addition to the regular
+``VIDEO_MODE_PAL`` (0), ``VIDEO_MODE_NTSC``, ``VIDEO_MODE_SECAM`` and
+``VIDEO_MODE_AUTO`` (3). Namely N/PAL Argentina, M/PAL, N/PAL, and NTSC
+Japan with numbers 3-6 (sic).
+
+The ``VIDEO_TUNER_STEREO_ON`` flag indicating stereo reception became
+``V4L2_TUNER_SUB_STEREO`` in field ``rxsubchans``. This field also
+permits the detection of monaural and bilingual audio, see the
+definition of struct :c:type:`v4l2_tuner` for details.
+Presently no replacement exists for the ``VIDEO_TUNER_RDS_ON`` and
+``VIDEO_TUNER_MBS_ON`` flags.
+
+The ``VIDEO_TUNER_LOW`` flag was renamed to ``V4L2_TUNER_CAP_LOW`` in
+the struct :c:type:`v4l2_tuner` ``capability`` field.
+
+The ``VIDIOCGFREQ`` and ``VIDIOCSFREQ`` ioctl to change the tuner
+frequency where renamed to
+:ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` and
+:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>`. They take a pointer
+to a struct :c:type:`v4l2_frequency` instead of an
+unsigned long integer.
+
+
+.. _v4l-image-properties:
+
+Image Properties
+================
+
+V4L2 has no equivalent of the ``VIDIOCGPICT`` and ``VIDIOCSPICT`` ioctl
+and struct ``video_picture``. The following fields where
+replaced by V4L2 controls accessible with the
+:ref:`VIDIOC_QUERYCTRL`,
+:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
+:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls:
+
+
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - struct ``video_picture``
+      - V4L2 Control ID
+    * - ``brightness``
+      - ``V4L2_CID_BRIGHTNESS``
+    * - ``hue``
+      - ``V4L2_CID_HUE``
+    * - ``colour``
+      - ``V4L2_CID_SATURATION``
+    * - ``contrast``
+      - ``V4L2_CID_CONTRAST``
+    * - ``whiteness``
+      - ``V4L2_CID_WHITENESS``
+
+
+The V4L picture controls are assumed to range from 0 to 65535 with no
+particular reset value. The V4L2 API permits arbitrary limits and
+defaults which can be queried with the
+:ref:`VIDIOC_QUERYCTRL` ioctl. For general
+information about controls see :ref:`control`.
+
+The ``depth`` (average number of bits per pixel) of a video image is
+implied by the selected image format. V4L2 does not explicitly provide
+such information assuming applications recognizing the format are aware
+of the image depth and others need not know. The ``palette`` field moved
+into the struct :c:type:`v4l2_pix_format`:
+
+
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - struct ``video_picture`` ``palette``
+      - struct :c:type:`v4l2_pix_format` ``pixfmt``
+    * - ``VIDEO_PALETTE_GREY``
+      - :ref:`V4L2_PIX_FMT_GREY <V4L2-PIX-FMT-GREY>`
+    * - ``VIDEO_PALETTE_HI240``
+      - :ref:`V4L2_PIX_FMT_HI240 <pixfmt-reserved>` [#f3]_
+    * - ``VIDEO_PALETTE_RGB565``
+      - :ref:`V4L2_PIX_FMT_RGB565 <pixfmt-rgb>`
+    * - ``VIDEO_PALETTE_RGB555``
+      - :ref:`V4L2_PIX_FMT_RGB555 <pixfmt-rgb>`
+    * - ``VIDEO_PALETTE_RGB24``
+      - :ref:`V4L2_PIX_FMT_BGR24 <pixfmt-rgb>`
+    * - ``VIDEO_PALETTE_RGB32``
+      - :ref:`V4L2_PIX_FMT_BGR32 <pixfmt-rgb>` [#f4]_
+    * - ``VIDEO_PALETTE_YUV422``
+      - :ref:`V4L2_PIX_FMT_YUYV <V4L2-PIX-FMT-YUYV>`
+    * - ``VIDEO_PALETTE_YUYV``\  [#f5]_
+      - :ref:`V4L2_PIX_FMT_YUYV <V4L2-PIX-FMT-YUYV>`
+    * - ``VIDEO_PALETTE_UYVY``
+      - :ref:`V4L2_PIX_FMT_UYVY <V4L2-PIX-FMT-UYVY>`
+    * - ``VIDEO_PALETTE_YUV420``
+      - None
+    * - ``VIDEO_PALETTE_YUV411``
+      - :ref:`V4L2_PIX_FMT_Y41P <V4L2-PIX-FMT-Y41P>` [#f6]_
+    * - ``VIDEO_PALETTE_RAW``
+      - None [#f7]_
+    * - ``VIDEO_PALETTE_YUV422P``
+      - :ref:`V4L2_PIX_FMT_YUV422P <V4L2-PIX-FMT-YUV422P>`
+    * - ``VIDEO_PALETTE_YUV411P``
+      - :ref:`V4L2_PIX_FMT_YUV411P <V4L2-PIX-FMT-YUV411P>` [#f8]_
+    * - ``VIDEO_PALETTE_YUV420P``
+      - :ref:`V4L2_PIX_FMT_YVU420 <V4L2-PIX-FMT-YVU420>`
+    * - ``VIDEO_PALETTE_YUV410P``
+      - :ref:`V4L2_PIX_FMT_YVU410 <V4L2-PIX-FMT-YVU410>`
+
+
+V4L2 image formats are defined in :ref:`pixfmt`. The image format can
+be selected with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
+
+
+Audio
+=====
+
+The ``VIDIOCGAUDIO`` and ``VIDIOCSAUDIO`` ioctl and struct
+``video_audio`` are used to enumerate the audio inputs
+of a V4L device. The equivalent V4L2 ioctls are
+:ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` and
+:ref:`VIDIOC_S_AUDIO <VIDIOC_G_AUDIO>` using struct
+:c:type:`v4l2_audio` as discussed in :ref:`audio`.
+
+The ``audio`` "channel number" field counting audio inputs was renamed
+to ``index``.
+
+On ``VIDIOCSAUDIO`` the ``mode`` field selects *one* of the
+``VIDEO_SOUND_MONO``, ``VIDEO_SOUND_STEREO``, ``VIDEO_SOUND_LANG1`` or
+``VIDEO_SOUND_LANG2`` audio demodulation modes. When the current audio
+standard is BTSC ``VIDEO_SOUND_LANG2`` refers to SAP and
+``VIDEO_SOUND_LANG1`` is meaningless. Also undocumented in the V4L
+specification, there is no way to query the selected mode. On
+``VIDIOCGAUDIO`` the driver returns the *actually received* audio
+programmes in this field. In the V4L2 API this information is stored in
+the struct :c:type:`v4l2_tuner` ``rxsubchans`` and
+``audmode`` fields, respectively. See :ref:`tuner` for more
+information on tuners. Related to audio modes struct
+:c:type:`v4l2_audio` also reports if this is a mono or
+stereo input, regardless if the source is a tuner.
+
+The following fields where replaced by V4L2 controls accessible with the
+:ref:`VIDIOC_QUERYCTRL`,
+:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
+:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls:
+
+
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - struct ``video_audio``
+      - V4L2 Control ID
+    * - ``volume``
+      - ``V4L2_CID_AUDIO_VOLUME``
+    * - ``bass``
+      - ``V4L2_CID_AUDIO_BASS``
+    * - ``treble``
+      - ``V4L2_CID_AUDIO_TREBLE``
+    * - ``balance``
+      - ``V4L2_CID_AUDIO_BALANCE``
+
+
+To determine which of these controls are supported by a driver V4L
+provides the ``flags`` ``VIDEO_AUDIO_VOLUME``, ``VIDEO_AUDIO_BASS``,
+``VIDEO_AUDIO_TREBLE`` and ``VIDEO_AUDIO_BALANCE``. In the V4L2 API the
+:ref:`VIDIOC_QUERYCTRL` ioctl reports if the
+respective control is supported. Accordingly the ``VIDEO_AUDIO_MUTABLE``
+and ``VIDEO_AUDIO_MUTE`` flags where replaced by the boolean
+``V4L2_CID_AUDIO_MUTE`` control.
+
+All V4L2 controls have a ``step`` attribute replacing the struct
+``video_audio`` ``step`` field. The V4L audio controls
+are assumed to range from 0 to 65535 with no particular reset value. The
+V4L2 API permits arbitrary limits and defaults which can be queried with
+the :ref:`VIDIOC_QUERYCTRL` ioctl. For general
+information about controls see :ref:`control`.
+
+
+Frame Buffer Overlay
+====================
+
+The V4L2 ioctls equivalent to ``VIDIOCGFBUF`` and ``VIDIOCSFBUF`` are
+:ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` and
+:ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`. The ``base`` field of struct
+``video_buffer`` remained unchanged, except V4L2 defines
+a flag to indicate non-destructive overlays instead of a ``NULL``
+pointer. All other fields moved into the struct
+:c:type:`v4l2_pix_format` ``fmt`` substructure of
+struct :c:type:`v4l2_framebuffer`. The ``depth``
+field was replaced by ``pixelformat``. See :ref:`pixfmt-rgb` for a
+list of RGB formats and their respective color depths.
+
+Instead of the special ioctls ``VIDIOCGWIN`` and ``VIDIOCSWIN`` V4L2
+uses the general-purpose data format negotiation ioctls
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`. They take a pointer to a struct
+:c:type:`v4l2_format` as argument. Here the ``win`` member
+of the ``fmt`` union is used, a struct
+:c:type:`v4l2_window`.
+
+The ``x``, ``y``, ``width`` and ``height`` fields of struct
+``video_window`` moved into struct
+:c:type:`v4l2_rect` substructure ``w`` of struct
+:c:type:`v4l2_window`. The ``chromakey``, ``clips``, and
+``clipcount`` fields remained unchanged. Struct
+``video_clip`` was renamed to struct
+:c:type:`v4l2_clip`, also containing a struct
+:c:type:`v4l2_rect`, but the semantics are still the same.
+
+The ``VIDEO_WINDOW_INTERLACE`` flag was dropped. Instead applications
+must set the ``field`` field to ``V4L2_FIELD_ANY`` or
+``V4L2_FIELD_INTERLACED``. The ``VIDEO_WINDOW_CHROMAKEY`` flag moved
+into struct :c:type:`v4l2_framebuffer`, under the new
+name ``V4L2_FBUF_FLAG_CHROMAKEY``.
+
+In V4L, storing a bitmap pointer in ``clips`` and setting ``clipcount``
+to ``VIDEO_CLIP_BITMAP`` (-1) requests bitmap clipping, using a fixed
+size bitmap of 1024 × 625 bits. Struct :c:type:`v4l2_window`
+has a separate ``bitmap`` pointer field for this purpose and the bitmap
+size is determined by ``w.width`` and ``w.height``.
+
+The ``VIDIOCCAPTURE`` ioctl to enable or disable overlay was renamed to
+:ref:`VIDIOC_OVERLAY`.
+
+
+Cropping
+========
+
+To capture only a subsection of the full picture V4L defines the
+``VIDIOCGCAPTURE`` and ``VIDIOCSCAPTURE`` ioctls using struct
+``video_capture``. The equivalent V4L2 ioctls are
+:ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and
+:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` using struct
+:c:type:`v4l2_crop`, and the related
+:ref:`VIDIOC_CROPCAP` ioctl. This is a rather
+complex matter, see :ref:`crop` for details.
+
+The ``x``, ``y``, ``width`` and ``height`` fields moved into struct
+:c:type:`v4l2_rect` substructure ``c`` of struct
+:c:type:`v4l2_crop`. The ``decimation`` field was dropped. In
+the V4L2 API the scaling factor is implied by the size of the cropping
+rectangle and the size of the captured or overlaid image.
+
+The ``VIDEO_CAPTURE_ODD`` and ``VIDEO_CAPTURE_EVEN`` flags to capture
+only the odd or even field, respectively, were replaced by
+``V4L2_FIELD_TOP`` and ``V4L2_FIELD_BOTTOM`` in the field named
+``field`` of struct :c:type:`v4l2_pix_format` and
+struct :c:type:`v4l2_window`. These structures are used to
+select a capture or overlay format with the
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
+
+
+Reading Images, Memory Mapping
+==============================
+
+
+Capturing using the read method
+-------------------------------
+
+There is no essential difference between reading images from a V4L or
+V4L2 device using the :ref:`read() <func-read>` function, however V4L2
+drivers are not required to support this I/O method. Applications can
+determine if the function is available with the
+:ref:`VIDIOC_QUERYCAP` ioctl. All V4L2 devices
+exchanging data with applications must support the
+:ref:`select() <func-select>` and :ref:`poll() <func-poll>`
+functions.
+
+To select an image format and size, V4L provides the ``VIDIOCSPICT`` and
+``VIDIOCSWIN`` ioctls. V4L2 uses the general-purpose data format
+negotiation ioctls :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`. They take a pointer to a struct
+:c:type:`v4l2_format` as argument, here the struct
+:c:type:`v4l2_pix_format` named ``pix`` of its
+``fmt`` union is used.
+
+For more information about the V4L2 read interface see :ref:`rw`.
+
+
+Capturing using memory mapping
+------------------------------
+
+Applications can read from V4L devices by mapping buffers in device
+memory, or more often just buffers allocated in DMA-able system memory,
+into their address space. This avoids the data copying overhead of the
+read method. V4L2 supports memory mapping as well, with a few
+differences.
+
+
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - V4L
+      - V4L2
+    * -
+      - The image format must be selected before buffers are allocated,
+	with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. When no
+	format is selected the driver may use the last, possibly by
+	another application requested format.
+    * - Applications cannot change the number of buffers. The it is built
+	into the driver, unless it has a module option to change the
+	number when the driver module is loaded.
+      - The :ref:`VIDIOC_REQBUFS` ioctl allocates the
+	desired number of buffers, this is a required step in the
+	initialization sequence.
+    * - Drivers map all buffers as one contiguous range of memory. The
+	``VIDIOCGMBUF`` ioctl is available to query the number of buffers,
+	the offset of each buffer from the start of the virtual file, and
+	the overall amount of memory used, which can be used as arguments
+	for the :ref:`mmap() <func-mmap>` function.
+      - Buffers are individually mapped. The offset and size of each
+	buffer can be determined with the
+	:ref:`VIDIOC_QUERYBUF` ioctl.
+    * - The ``VIDIOCMCAPTURE`` ioctl prepares a buffer for capturing. It
+	also determines the image format for this buffer. The ioctl
+	returns immediately, eventually with an ``EAGAIN`` error code if no
+	video signal had been detected. When the driver supports more than
+	one buffer applications can call the ioctl multiple times and thus
+	have multiple outstanding capture requests.
+
+	The ``VIDIOCSYNC`` ioctl suspends execution until a particular
+	buffer has been filled.
+      - Drivers maintain an incoming and outgoing queue.
+	:ref:`VIDIOC_QBUF` enqueues any empty buffer into
+	the incoming queue. Filled buffers are dequeued from the outgoing
+	queue with the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. To wait
+	until filled buffers become available this function,
+	:ref:`select() <func-select>` or :ref:`poll() <func-poll>` can
+	be used. The :ref:`VIDIOC_STREAMON` ioctl
+	must be called once after enqueuing one or more buffers to start
+	capturing. Its counterpart
+	:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` stops capturing and
+	dequeues all buffers from both queues. Applications can query the
+	signal status, if known, with the
+	:ref:`VIDIOC_ENUMINPUT` ioctl.
+
+
+For a more in-depth discussion of memory mapping and examples, see
+:ref:`mmap`.
+
+
+Reading Raw VBI Data
+====================
+
+Originally the V4L API did not specify a raw VBI capture interface, only
+the device file ``/dev/vbi`` was reserved for this purpose. The only
+driver supporting this interface was the BTTV driver, de-facto defining
+the V4L VBI interface. Reading from the device yields a raw VBI image
+with the following parameters:
+
+
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - struct :c:type:`v4l2_vbi_format`
+      - V4L, BTTV driver
+    * - sampling_rate
+      - 28636363 Hz NTSC (or any other 525-line standard); 35468950 Hz PAL
+	and SECAM (625-line standards)
+    * - offset
+      - ?
+    * - samples_per_line
+      - 2048
+    * - sample_format
+      - V4L2_PIX_FMT_GREY. The last four bytes (a machine endianness
+	integer) contain a frame counter.
+    * - start[]
+      - 10, 273 NTSC; 22, 335 PAL and SECAM
+    * - count[]
+      - 16, 16 [#f9]_
+    * - flags
+      - 0
+
+
+Undocumented in the V4L specification, in Linux 2.3 the
+``VIDIOCGVBIFMT`` and ``VIDIOCSVBIFMT`` ioctls using struct
+``vbi_format`` were added to determine the VBI image
+parameters. These ioctls are only partially compatible with the V4L2 VBI
+interface specified in :ref:`raw-vbi`.
+
+An ``offset`` field does not exist, ``sample_format`` is supposed to be
+``VIDEO_PALETTE_RAW``, equivalent to ``V4L2_PIX_FMT_GREY``. The
+remaining fields are probably equivalent to struct
+:c:type:`v4l2_vbi_format`.
+
+Apparently only the Zoran (ZR 36120) driver implements these ioctls. The
+semantics differ from those specified for V4L2 in two ways. The
+parameters are reset on :ref:`open() <func-open>` and
+``VIDIOCSVBIFMT`` always returns an ``EINVAL`` error code if the parameters
+are invalid.
+
+
+Miscellaneous
+=============
+
+V4L2 has no equivalent of the ``VIDIOCGUNIT`` ioctl. Applications can
+find the VBI device associated with a video capture device (or vice
+versa) by reopening the device and requesting VBI data. For details see
+:ref:`open`.
+
+No replacement exists for ``VIDIOCKEY``, and the V4L functions for
+microcode programming. A new interface for MPEG compression and playback
+devices is documented in :ref:`extended-controls`.
+
+.. [#f1]
+   According to Documentation/admin-guide/devices.rst these should be symbolic links
+   to ``/dev/video0``. Note the original bttv interface is not
+   compatible with V4L or V4L2.
+
+.. [#f2]
+   According to ``Documentation/admin-guide/devices.rst`` a symbolic link to
+   ``/dev/radio0``.
+
+.. [#f3]
+   This is a custom format used by the BTTV driver, not one of the V4L2
+   standard formats.
+
+.. [#f4]
+   Presumably all V4L RGB formats are little-endian, although some
+   drivers might interpret them according to machine endianness. V4L2
+   defines little-endian, big-endian and red/blue swapped variants. For
+   details see :ref:`pixfmt-rgb`.
+
+.. [#f5]
+   ``VIDEO_PALETTE_YUV422`` and ``VIDEO_PALETTE_YUYV`` are the same
+   formats. Some V4L drivers respond to one, some to the other.
+
+.. [#f6]
+   Not to be confused with ``V4L2_PIX_FMT_YUV411P``, which is a planar
+   format.
+
+.. [#f7]
+   V4L explains this as: "RAW capture (BT848)"
+
+.. [#f8]
+   Not to be confused with ``V4L2_PIX_FMT_Y41P``, which is a packed
+   format.
+
+.. [#f9]
+   Old driver versions used different values, eventually the custom
+   ``BTTV_VBISIZE`` ioctl was added to query the correct values.
diff --git a/Documentation/userspace-api/media/v4l/dmabuf.rst b/Documentation/userspace-api/media/v4l/dmabuf.rst
new file mode 100644
index 000000000000..342421ff9497
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dmabuf.rst
@@ -0,0 +1,169 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dmabuf:
+
+************************************
+Streaming I/O (DMA buffer importing)
+************************************
+
+The DMABUF framework provides a generic method for sharing buffers
+between multiple devices. Device drivers that support DMABUF can export
+a DMA buffer to userspace as a file descriptor (known as the exporter
+role), import a DMA buffer from userspace using a file descriptor
+previously exported for a different or the same device (known as the
+importer role), or both. This section describes the DMABUF importer role
+API in V4L2.
+
+Refer to :ref:`DMABUF exporting <VIDIOC_EXPBUF>` for details about
+exporting V4L2 buffers as DMABUF file descriptors.
+
+Input and output devices support the streaming I/O method when the
+``V4L2_CAP_STREAMING`` flag in the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP <VIDIOC_QUERYCAP>` ioctl is set. Whether
+importing DMA buffers through DMABUF file descriptors is supported is
+determined by calling the :ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`
+ioctl with the memory type set to ``V4L2_MEMORY_DMABUF``.
+
+This I/O method is dedicated to sharing DMA buffers between different
+devices, which may be V4L devices or other video-related devices (e.g.
+DRM). Buffers (planes) are allocated by a driver on behalf of an
+application. Next, these buffers are exported to the application as file
+descriptors using an API which is specific for an allocator driver. Only
+such file descriptor are exchanged. The descriptors and meta-information
+are passed in struct :c:type:`v4l2_buffer` (or in struct
+:c:type:`v4l2_plane` in the multi-planar API case). The
+driver must be switched into DMABUF I/O mode by calling the
+:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>` with the desired buffer type.
+
+
+Example: Initiating streaming I/O with DMABUF file descriptors
+==============================================================
+
+.. code-block:: c
+
+    struct v4l2_requestbuffers reqbuf;
+
+    memset(&reqbuf, 0, sizeof (reqbuf));
+    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+    reqbuf.memory = V4L2_MEMORY_DMABUF;
+    reqbuf.count = 1;
+
+    if (ioctl(fd, VIDIOC_REQBUFS, &reqbuf) == -1) {
+	if (errno == EINVAL)
+	    printf("Video capturing or DMABUF streaming is not supported\\n");
+	else
+	    perror("VIDIOC_REQBUFS");
+
+	exit(EXIT_FAILURE);
+    }
+
+The buffer (plane) file descriptor is passed on the fly with the
+:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` ioctl. In case of multiplanar
+buffers, every plane can be associated with a different DMABUF
+descriptor. Although buffers are commonly cycled, applications can pass
+a different DMABUF descriptor at each :ref:`VIDIOC_QBUF <VIDIOC_QBUF>` call.
+
+Example: Queueing DMABUF using single plane API
+===============================================
+
+.. code-block:: c
+
+    int buffer_queue(int v4lfd, int index, int dmafd)
+    {
+	struct v4l2_buffer buf;
+
+	memset(&buf, 0, sizeof buf);
+	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	buf.memory = V4L2_MEMORY_DMABUF;
+	buf.index = index;
+	buf.m.fd = dmafd;
+
+	if (ioctl(v4lfd, VIDIOC_QBUF, &buf) == -1) {
+	    perror("VIDIOC_QBUF");
+	    return -1;
+	}
+
+	return 0;
+    }
+
+Example 3.6. Queueing DMABUF using multi plane API
+==================================================
+
+.. code-block:: c
+
+    int buffer_queue_mp(int v4lfd, int index, int dmafd[], int n_planes)
+    {
+	struct v4l2_buffer buf;
+	struct v4l2_plane planes[VIDEO_MAX_PLANES];
+	int i;
+
+	memset(&buf, 0, sizeof buf);
+	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+	buf.memory = V4L2_MEMORY_DMABUF;
+	buf.index = index;
+	buf.m.planes = planes;
+	buf.length = n_planes;
+
+	memset(&planes, 0, sizeof planes);
+
+	for (i = 0; i < n_planes; ++i)
+	    buf.m.planes[i].m.fd = dmafd[i];
+
+	if (ioctl(v4lfd, VIDIOC_QBUF, &buf) == -1) {
+	    perror("VIDIOC_QBUF");
+	    return -1;
+	}
+
+	return 0;
+    }
+
+Captured or displayed buffers are dequeued with the
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. The driver can unlock the
+buffer at any time between the completion of the DMA and this ioctl. The
+memory is also unlocked when
+:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called,
+:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, or when the device is closed.
+
+For capturing applications it is customary to enqueue a number of empty
+buffers, to start capturing and enter the read loop. Here the
+application waits until a filled buffer can be dequeued, and re-enqueues
+the buffer when the data is no longer needed. Output applications fill
+and enqueue buffers, when enough buffers are stacked up output is
+started. In the write loop, when the application runs out of free
+buffers it must wait until an empty buffer can be dequeued and reused.
+Two methods exist to suspend execution of the application until one or
+more buffers can be dequeued. By default :ref:`VIDIOC_DQBUF
+<VIDIOC_QBUF>` blocks when no buffer is in the outgoing queue. When the
+``O_NONBLOCK`` flag was given to the :ref:`open() <func-open>` function,
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN``
+error code when no buffer is available. The
+:ref:`select() <func-select>` and :ref:`poll() <func-poll>`
+functions are always available.
+
+To start and stop capturing or displaying applications call the
+:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and
+:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls.
+
+.. note::
+
+   :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from
+   both queues and unlocks all buffers as a side effect. Since there is no
+   notion of doing anything "now" on a multitasking system, if an
+   application needs to synchronize with another event it should examine
+   the struct :c:type:`v4l2_buffer` ``timestamp`` of captured or
+   outputted buffers.
+
+Drivers implementing DMABUF importing I/O must support the
+:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`,
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_STREAMON
+<VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls,
+and the :ref:`select() <func-select>` and :ref:`poll() <func-poll>`
+functions.
diff --git a/Documentation/userspace-api/media/v4l/dv-timings.rst b/Documentation/userspace-api/media/v4l/dv-timings.rst
new file mode 100644
index 000000000000..e216aa9edef0
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dv-timings.rst
@@ -0,0 +1,45 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dv-timings:
+
+**************************
+Digital Video (DV) Timings
+**************************
+
+The video standards discussed so far have been dealing with Analog TV
+and the corresponding video timings. Today there are many more different
+hardware interfaces such as High Definition TV interfaces (HDMI), VGA,
+DVI connectors etc., that carry video signals and there is a need to
+extend the API to select the video timings for these interfaces. Since
+it is not possible to extend the :ref:`v4l2_std_id <v4l2-std-id>`
+due to the limited bits available, a new set of ioctls was added to
+set/get video timings at the input and output.
+
+These ioctls deal with the detailed digital video timings that define
+each video format. This includes parameters such as the active video
+width and height, signal polarities, frontporches, backporches, sync
+widths etc. The ``linux/v4l2-dv-timings.h`` header can be used to get
+the timings of the formats in the :ref:`cea861` and :ref:`vesadmt`
+standards.
+
+To enumerate and query the attributes of the DV timings supported by a
+device applications use the
+:ref:`VIDIOC_ENUM_DV_TIMINGS` and
+:ref:`VIDIOC_DV_TIMINGS_CAP` ioctls. To set
+DV timings for the device applications use the
+:ref:`VIDIOC_S_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>` ioctl and to get
+current DV timings they use the
+:ref:`VIDIOC_G_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>` ioctl. To detect
+the DV timings as seen by the video receiver applications use the
+:ref:`VIDIOC_QUERY_DV_TIMINGS` ioctl.
+
+Applications can make use of the :ref:`input-capabilities` and
+:ref:`output-capabilities` flags to determine whether the digital
+video ioctls can be used with the given input or output.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
new file mode 100644
index 000000000000..e39f84d2447f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
@@ -0,0 +1,515 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _camera-controls:
+
+************************
+Camera Control Reference
+************************
+
+The Camera class includes controls for mechanical (or equivalent
+digital) features of a device such as controllable lenses or sensors.
+
+
+.. _camera-control-id:
+
+Camera Control IDs
+==================
+
+``V4L2_CID_CAMERA_CLASS (class)``
+    The Camera class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+.. _v4l2-exposure-auto-type:
+
+``V4L2_CID_EXPOSURE_AUTO``
+    (enum)
+
+enum v4l2_exposure_auto_type -
+    Enables automatic adjustments of the exposure time and/or iris
+    aperture. The effect of manual changes of the exposure time or iris
+    aperture while these features are enabled is undefined, drivers
+    should ignore such requests. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_EXPOSURE_AUTO``
+      - Automatic exposure time, automatic iris aperture.
+    * - ``V4L2_EXPOSURE_MANUAL``
+      - Manual exposure time, manual iris.
+    * - ``V4L2_EXPOSURE_SHUTTER_PRIORITY``
+      - Manual exposure time, auto iris.
+    * - ``V4L2_EXPOSURE_APERTURE_PRIORITY``
+      - Auto exposure time, manual iris.
+
+
+
+``V4L2_CID_EXPOSURE_ABSOLUTE (integer)``
+    Determines the exposure time of the camera sensor. The exposure time
+    is limited by the frame interval. Drivers should interpret the
+    values as 100 µs units, where the value 1 stands for 1/10000th of a
+    second, 10000 for 1 second and 100000 for 10 seconds.
+
+``V4L2_CID_EXPOSURE_AUTO_PRIORITY (boolean)``
+    When ``V4L2_CID_EXPOSURE_AUTO`` is set to ``AUTO`` or
+    ``APERTURE_PRIORITY``, this control determines if the device may
+    dynamically vary the frame rate. By default this feature is disabled
+    (0) and the frame rate must remain constant.
+
+``V4L2_CID_AUTO_EXPOSURE_BIAS (integer menu)``
+    Determines the automatic exposure compensation, it is effective only
+    when ``V4L2_CID_EXPOSURE_AUTO`` control is set to ``AUTO``,
+    ``SHUTTER_PRIORITY`` or ``APERTURE_PRIORITY``. It is expressed in
+    terms of EV, drivers should interpret the values as 0.001 EV units,
+    where the value 1000 stands for +1 EV.
+
+    Increasing the exposure compensation value is equivalent to
+    decreasing the exposure value (EV) and will increase the amount of
+    light at the image sensor. The camera performs the exposure
+    compensation by adjusting absolute exposure time and/or aperture.
+
+.. _v4l2-exposure-metering:
+
+``V4L2_CID_EXPOSURE_METERING``
+    (enum)
+
+enum v4l2_exposure_metering -
+    Determines how the camera measures the amount of light available for
+    the frame exposure. Possible values are:
+
+.. tabularcolumns:: |p{8.7cm}|p{8.8cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_EXPOSURE_METERING_AVERAGE``
+      - Use the light information coming from the entire frame and average
+	giving no weighting to any particular portion of the metered area.
+    * - ``V4L2_EXPOSURE_METERING_CENTER_WEIGHTED``
+      - Average the light information coming from the entire frame giving
+	priority to the center of the metered area.
+    * - ``V4L2_EXPOSURE_METERING_SPOT``
+      - Measure only very small area at the center of the frame.
+    * - ``V4L2_EXPOSURE_METERING_MATRIX``
+      - A multi-zone metering. The light intensity is measured in several
+	points of the frame and the results are combined. The algorithm of
+	the zones selection and their significance in calculating the
+	final value is device dependent.
+
+
+
+``V4L2_CID_PAN_RELATIVE (integer)``
+    This control turns the camera horizontally by the specified amount.
+    The unit is undefined. A positive value moves the camera to the
+    right (clockwise when viewed from above), a negative value to the
+    left. A value of zero does not cause motion. This is a write-only
+    control.
+
+``V4L2_CID_TILT_RELATIVE (integer)``
+    This control turns the camera vertically by the specified amount.
+    The unit is undefined. A positive value moves the camera up, a
+    negative value down. A value of zero does not cause motion. This is
+    a write-only control.
+
+``V4L2_CID_PAN_RESET (button)``
+    When this control is set, the camera moves horizontally to the
+    default position.
+
+``V4L2_CID_TILT_RESET (button)``
+    When this control is set, the camera moves vertically to the default
+    position.
+
+``V4L2_CID_PAN_ABSOLUTE (integer)``
+    This control turns the camera horizontally to the specified
+    position. Positive values move the camera to the right (clockwise
+    when viewed from above), negative values to the left. Drivers should
+    interpret the values as arc seconds, with valid values between -180
+    * 3600 and +180 * 3600 inclusive.
+
+``V4L2_CID_TILT_ABSOLUTE (integer)``
+    This control turns the camera vertically to the specified position.
+    Positive values move the camera up, negative values down. Drivers
+    should interpret the values as arc seconds, with valid values
+    between -180 * 3600 and +180 * 3600 inclusive.
+
+``V4L2_CID_FOCUS_ABSOLUTE (integer)``
+    This control sets the focal point of the camera to the specified
+    position. The unit is undefined. Positive values set the focus
+    closer to the camera, negative values towards infinity.
+
+``V4L2_CID_FOCUS_RELATIVE (integer)``
+    This control moves the focal point of the camera by the specified
+    amount. The unit is undefined. Positive values move the focus closer
+    to the camera, negative values towards infinity. This is a
+    write-only control.
+
+``V4L2_CID_FOCUS_AUTO (boolean)``
+    Enables continuous automatic focus adjustments. The effect of manual
+    focus adjustments while this feature is enabled is undefined,
+    drivers should ignore such requests.
+
+``V4L2_CID_AUTO_FOCUS_START (button)``
+    Starts single auto focus process. The effect of setting this control
+    when ``V4L2_CID_FOCUS_AUTO`` is set to ``TRUE`` (1) is undefined,
+    drivers should ignore such requests.
+
+``V4L2_CID_AUTO_FOCUS_STOP (button)``
+    Aborts automatic focusing started with ``V4L2_CID_AUTO_FOCUS_START``
+    control. It is effective only when the continuous autofocus is
+    disabled, that is when ``V4L2_CID_FOCUS_AUTO`` control is set to
+    ``FALSE`` (0).
+
+.. _v4l2-auto-focus-status:
+
+``V4L2_CID_AUTO_FOCUS_STATUS (bitmask)``
+    The automatic focus status. This is a read-only control.
+
+    Setting ``V4L2_LOCK_FOCUS`` lock bit of the ``V4L2_CID_3A_LOCK``
+    control may stop updates of the ``V4L2_CID_AUTO_FOCUS_STATUS``
+    control value.
+
+.. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_AUTO_FOCUS_STATUS_IDLE``
+      - Automatic focus is not active.
+    * - ``V4L2_AUTO_FOCUS_STATUS_BUSY``
+      - Automatic focusing is in progress.
+    * - ``V4L2_AUTO_FOCUS_STATUS_REACHED``
+      - Focus has been reached.
+    * - ``V4L2_AUTO_FOCUS_STATUS_FAILED``
+      - Automatic focus has failed, the driver will not transition from
+	this state until another action is performed by an application.
+
+
+
+.. _v4l2-auto-focus-range:
+
+``V4L2_CID_AUTO_FOCUS_RANGE``
+    (enum)
+
+enum v4l2_auto_focus_range -
+    Determines auto focus distance range for which lens may be adjusted.
+
+.. tabularcolumns:: |p{6.8cm}|p{10.7cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_AUTO_FOCUS_RANGE_AUTO``
+      - The camera automatically selects the focus range.
+    * - ``V4L2_AUTO_FOCUS_RANGE_NORMAL``
+      - Normal distance range, limited for best automatic focus
+	performance.
+    * - ``V4L2_AUTO_FOCUS_RANGE_MACRO``
+      - Macro (close-up) auto focus. The camera will use its minimum
+	possible distance for auto focus.
+    * - ``V4L2_AUTO_FOCUS_RANGE_INFINITY``
+      - The lens is set to focus on an object at infinite distance.
+
+
+
+``V4L2_CID_ZOOM_ABSOLUTE (integer)``
+    Specify the objective lens focal length as an absolute value. The
+    zoom unit is driver-specific and its value should be a positive
+    integer.
+
+``V4L2_CID_ZOOM_RELATIVE (integer)``
+    Specify the objective lens focal length relatively to the current
+    value. Positive values move the zoom lens group towards the
+    telephoto direction, negative values towards the wide-angle
+    direction. The zoom unit is driver-specific. This is a write-only
+    control.
+
+``V4L2_CID_ZOOM_CONTINUOUS (integer)``
+    Move the objective lens group at the specified speed until it
+    reaches physical device limits or until an explicit request to stop
+    the movement. A positive value moves the zoom lens group towards the
+    telephoto direction. A value of zero stops the zoom lens group
+    movement. A negative value moves the zoom lens group towards the
+    wide-angle direction. The zoom speed unit is driver-specific.
+
+``V4L2_CID_IRIS_ABSOLUTE (integer)``
+    This control sets the camera's aperture to the specified value. The
+    unit is undefined. Larger values open the iris wider, smaller values
+    close it.
+
+``V4L2_CID_IRIS_RELATIVE (integer)``
+    This control modifies the camera's aperture by the specified amount.
+    The unit is undefined. Positive values open the iris one step
+    further, negative values close it one step further. This is a
+    write-only control.
+
+``V4L2_CID_PRIVACY (boolean)``
+    Prevent video from being acquired by the camera. When this control
+    is set to ``TRUE`` (1), no image can be captured by the camera.
+    Common means to enforce privacy are mechanical obturation of the
+    sensor and firmware image processing, but the device is not
+    restricted to these methods. Devices that implement the privacy
+    control must support read access and may support write access.
+
+``V4L2_CID_BAND_STOP_FILTER (integer)``
+    Switch the band-stop filter of a camera sensor on or off, or specify
+    its strength. Such band-stop filters can be used, for example, to
+    filter out the fluorescent light component.
+
+.. _v4l2-auto-n-preset-white-balance:
+
+``V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE``
+    (enum)
+
+enum v4l2_auto_n_preset_white_balance -
+    Sets white balance to automatic, manual or a preset. The presets
+    determine color temperature of the light as a hint to the camera for
+    white balance adjustments resulting in most accurate color
+    representation. The following white balance presets are listed in
+    order of increasing color temperature.
+
+.. tabularcolumns:: |p{7.2 cm}|p{10.3cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_WHITE_BALANCE_MANUAL``
+      - Manual white balance.
+    * - ``V4L2_WHITE_BALANCE_AUTO``
+      - Automatic white balance adjustments.
+    * - ``V4L2_WHITE_BALANCE_INCANDESCENT``
+      - White balance setting for incandescent (tungsten) lighting. It
+	generally cools down the colors and corresponds approximately to
+	2500...3500 K color temperature range.
+    * - ``V4L2_WHITE_BALANCE_FLUORESCENT``
+      - White balance preset for fluorescent lighting. It corresponds
+	approximately to 4000...5000 K color temperature.
+    * - ``V4L2_WHITE_BALANCE_FLUORESCENT_H``
+      - With this setting the camera will compensate for fluorescent H
+	lighting.
+    * - ``V4L2_WHITE_BALANCE_HORIZON``
+      - White balance setting for horizon daylight. It corresponds
+	approximately to 5000 K color temperature.
+    * - ``V4L2_WHITE_BALANCE_DAYLIGHT``
+      - White balance preset for daylight (with clear sky). It corresponds
+	approximately to 5000...6500 K color temperature.
+    * - ``V4L2_WHITE_BALANCE_FLASH``
+      - With this setting the camera will compensate for the flash light.
+	It slightly warms up the colors and corresponds roughly to
+	5000...5500 K color temperature.
+    * - ``V4L2_WHITE_BALANCE_CLOUDY``
+      - White balance preset for moderately overcast sky. This option
+	corresponds approximately to 6500...8000 K color temperature
+	range.
+    * - ``V4L2_WHITE_BALANCE_SHADE``
+      - White balance preset for shade or heavily overcast sky. It
+	corresponds approximately to 9000...10000 K color temperature.
+
+
+
+.. _v4l2-wide-dynamic-range:
+
+``V4L2_CID_WIDE_DYNAMIC_RANGE (boolean)``
+    Enables or disables the camera's wide dynamic range feature. This
+    feature allows to obtain clear images in situations where intensity
+    of the illumination varies significantly throughout the scene, i.e.
+    there are simultaneously very dark and very bright areas. It is most
+    commonly realized in cameras by combining two subsequent frames with
+    different exposure times.  [#f1]_
+
+.. _v4l2-image-stabilization:
+
+``V4L2_CID_IMAGE_STABILIZATION (boolean)``
+    Enables or disables image stabilization.
+
+``V4L2_CID_ISO_SENSITIVITY (integer menu)``
+    Determines ISO equivalent of an image sensor indicating the sensor's
+    sensitivity to light. The numbers are expressed in arithmetic scale,
+    as per :ref:`iso12232` standard, where doubling the sensor
+    sensitivity is represented by doubling the numerical ISO value.
+    Applications should interpret the values as standard ISO values
+    multiplied by 1000, e.g. control value 800 stands for ISO 0.8.
+    Drivers will usually support only a subset of standard ISO values.
+    The effect of setting this control while the
+    ``V4L2_CID_ISO_SENSITIVITY_AUTO`` control is set to a value other
+    than ``V4L2_CID_ISO_SENSITIVITY_MANUAL`` is undefined, drivers
+    should ignore such requests.
+
+.. _v4l2-iso-sensitivity-auto-type:
+
+``V4L2_CID_ISO_SENSITIVITY_AUTO``
+    (enum)
+
+enum v4l2_iso_sensitivity_type -
+    Enables or disables automatic ISO sensitivity adjustments.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_CID_ISO_SENSITIVITY_MANUAL``
+      - Manual ISO sensitivity.
+    * - ``V4L2_CID_ISO_SENSITIVITY_AUTO``
+      - Automatic ISO sensitivity adjustments.
+
+
+
+.. _v4l2-scene-mode:
+
+``V4L2_CID_SCENE_MODE``
+    (enum)
+
+enum v4l2_scene_mode -
+    This control allows to select scene programs as the camera automatic
+    modes optimized for common shooting scenes. Within these modes the
+    camera determines best exposure, aperture, focusing, light metering,
+    white balance and equivalent sensitivity. The controls of those
+    parameters are influenced by the scene mode control. An exact
+    behavior in each mode is subject to the camera specification.
+
+    When the scene mode feature is not used, this control should be set
+    to ``V4L2_SCENE_MODE_NONE`` to make sure the other possibly related
+    controls are accessible. The following scene programs are defined:
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{5.9cm}|p{11.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_SCENE_MODE_NONE``
+      - The scene mode feature is disabled.
+    * - ``V4L2_SCENE_MODE_BACKLIGHT``
+      - Backlight. Compensates for dark shadows when light is coming from
+	behind a subject, also by automatically turning on the flash.
+    * - ``V4L2_SCENE_MODE_BEACH_SNOW``
+      - Beach and snow. This mode compensates for all-white or bright
+	scenes, which tend to look gray and low contrast, when camera's
+	automatic exposure is based on an average scene brightness. To
+	compensate, this mode automatically slightly overexposes the
+	frames. The white balance may also be adjusted to compensate for
+	the fact that reflected snow looks bluish rather than white.
+    * - ``V4L2_SCENE_MODE_CANDLELIGHT``
+      - Candle light. The camera generally raises the ISO sensitivity and
+	lowers the shutter speed. This mode compensates for relatively
+	close subject in the scene. The flash is disabled in order to
+	preserve the ambiance of the light.
+    * - ``V4L2_SCENE_MODE_DAWN_DUSK``
+      - Dawn and dusk. Preserves the colors seen in low natural light
+	before dusk and after down. The camera may turn off the flash, and
+	automatically focus at infinity. It will usually boost saturation
+	and lower the shutter speed.
+    * - ``V4L2_SCENE_MODE_FALL_COLORS``
+      - Fall colors. Increases saturation and adjusts white balance for
+	color enhancement. Pictures of autumn leaves get saturated reds
+	and yellows.
+    * - ``V4L2_SCENE_MODE_FIREWORKS``
+      - Fireworks. Long exposure times are used to capture the expanding
+	burst of light from a firework. The camera may invoke image
+	stabilization.
+    * - ``V4L2_SCENE_MODE_LANDSCAPE``
+      - Landscape. The camera may choose a small aperture to provide deep
+	depth of field and long exposure duration to help capture detail
+	in dim light conditions. The focus is fixed at infinity. Suitable
+	for distant and wide scenery.
+    * - ``V4L2_SCENE_MODE_NIGHT``
+      - Night, also known as Night Landscape. Designed for low light
+	conditions, it preserves detail in the dark areas without blowing
+	out bright objects. The camera generally sets itself to a
+	medium-to-high ISO sensitivity, with a relatively long exposure
+	time, and turns flash off. As such, there will be increased image
+	noise and the possibility of blurred image.
+    * - ``V4L2_SCENE_MODE_PARTY_INDOOR``
+      - Party and indoor. Designed to capture indoor scenes that are lit
+	by indoor background lighting as well as the flash. The camera
+	usually increases ISO sensitivity, and adjusts exposure for the
+	low light conditions.
+    * - ``V4L2_SCENE_MODE_PORTRAIT``
+      - Portrait. The camera adjusts the aperture so that the depth of
+	field is reduced, which helps to isolate the subject against a
+	smooth background. Most cameras recognize the presence of faces in
+	the scene and focus on them. The color hue is adjusted to enhance
+	skin tones. The intensity of the flash is often reduced.
+    * - ``V4L2_SCENE_MODE_SPORTS``
+      - Sports. Significantly increases ISO and uses a fast shutter speed
+	to freeze motion of rapidly-moving subjects. Increased image noise
+	may be seen in this mode.
+    * - ``V4L2_SCENE_MODE_SUNSET``
+      - Sunset. Preserves deep hues seen in sunsets and sunrises. It bumps
+	up the saturation.
+    * - ``V4L2_SCENE_MODE_TEXT``
+      - Text. It applies extra contrast and sharpness, it is typically a
+	black-and-white mode optimized for readability. Automatic focus
+	may be switched to close-up mode and this setting may also involve
+	some lens-distortion correction.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_3A_LOCK (bitmask)``
+    This control locks or unlocks the automatic focus, exposure and
+    white balance. The automatic adjustments can be paused independently
+    by setting the corresponding lock bit to 1. The camera then retains
+    the settings until the lock bit is cleared. The following lock bits
+    are defined:
+
+    When a given algorithm is not enabled, drivers should ignore
+    requests to lock it and should return no error. An example might be
+    an application setting bit ``V4L2_LOCK_WHITE_BALANCE`` when the
+    ``V4L2_CID_AUTO_WHITE_BALANCE`` control is set to ``FALSE``. The
+    value of this control may be changed by exposure, white balance or
+    focus controls.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_LOCK_EXPOSURE``
+      - Automatic exposure adjustments lock.
+    * - ``V4L2_LOCK_WHITE_BALANCE``
+      - Automatic white balance adjustments lock.
+    * - ``V4L2_LOCK_FOCUS``
+      - Automatic focus lock.
+
+
+
+``V4L2_CID_PAN_SPEED (integer)``
+    This control turns the camera horizontally at the specific speed.
+    The unit is undefined. A positive value moves the camera to the
+    right (clockwise when viewed from above), a negative value to the
+    left. A value of zero stops the motion if one is in progress and has
+    no effect otherwise.
+
+``V4L2_CID_TILT_SPEED (integer)``
+    This control turns the camera vertically at the specified speed. The
+    unit is undefined. A positive value moves the camera up, a negative
+    value down. A value of zero stops the motion if one is in progress
+    and has no effect otherwise.
+
+.. [#f1]
+   This control may be changed to a menu control in the future, if more
+   options are required.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
new file mode 100644
index 000000000000..d0d506a444b1
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -0,0 +1,4274 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _mpeg-controls:
+
+***********************
+Codec Control Reference
+***********************
+
+Below all controls within the Codec control class are described. First
+the generic controls, then controls specific for certain hardware.
+
+.. note::
+
+   These controls are applicable to all codecs and not just MPEG. The
+   defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG as the controls
+   were originally made for MPEG codecs and later extended to cover all
+   encoding formats.
+
+
+Generic Codec Controls
+======================
+
+
+.. _mpeg-control-id:
+
+Codec Control IDs
+-----------------
+
+``V4L2_CID_MPEG_CLASS (class)``
+    The Codec class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class. This description can be
+    used as the caption of a Tab page in a GUI, for example.
+
+.. _v4l2-mpeg-stream-type:
+
+``V4L2_CID_MPEG_STREAM_TYPE``
+    (enum)
+
+enum v4l2_mpeg_stream_type -
+    The MPEG-1, -2 or -4 output stream type. One cannot assume anything
+    here. Each hardware MPEG encoder tends to support different subsets
+    of the available MPEG stream types. This control is specific to
+    multiplexed MPEG streams. The currently defined stream types are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_PS``
+      - MPEG-2 program stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_TS``
+      - MPEG-2 transport stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_SS``
+      - MPEG-1 system stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_DVD``
+      - MPEG-2 DVD-compatible stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_VCD``
+      - MPEG-1 VCD-compatible stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD``
+      - MPEG-2 SVCD-compatible stream
+
+
+
+``V4L2_CID_MPEG_STREAM_PID_PMT (integer)``
+    Program Map Table Packet ID for the MPEG transport stream (default
+    16)
+
+``V4L2_CID_MPEG_STREAM_PID_AUDIO (integer)``
+    Audio Packet ID for the MPEG transport stream (default 256)
+
+``V4L2_CID_MPEG_STREAM_PID_VIDEO (integer)``
+    Video Packet ID for the MPEG transport stream (default 260)
+
+``V4L2_CID_MPEG_STREAM_PID_PCR (integer)``
+    Packet ID for the MPEG transport stream carrying PCR fields (default
+    259)
+
+``V4L2_CID_MPEG_STREAM_PES_ID_AUDIO (integer)``
+    Audio ID for MPEG PES
+
+``V4L2_CID_MPEG_STREAM_PES_ID_VIDEO (integer)``
+    Video ID for MPEG PES
+
+.. _v4l2-mpeg-stream-vbi-fmt:
+
+``V4L2_CID_MPEG_STREAM_VBI_FMT``
+    (enum)
+
+enum v4l2_mpeg_stream_vbi_fmt -
+    Some cards can embed VBI data (e. g. Closed Caption, Teletext) into
+    the MPEG stream. This control selects whether VBI data should be
+    embedded, and if so, what embedding method should be used. The list
+    of possible VBI formats depends on the driver. The currently defined
+    VBI format types are:
+
+
+
+.. tabularcolumns:: |p{6.6 cm}|p{10.9cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_STREAM_VBI_FMT_NONE``
+      - No VBI in the MPEG stream
+    * - ``V4L2_MPEG_STREAM_VBI_FMT_IVTV``
+      - VBI in private packets, IVTV format (documented in the kernel
+	sources in the file
+	``Documentation/userspace-api/media/drivers/cx2341x-uapi.rst``)
+
+
+
+.. _v4l2-mpeg-audio-sampling-freq:
+
+``V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ``
+    (enum)
+
+enum v4l2_mpeg_audio_sampling_freq -
+    MPEG Audio sampling frequency. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100``
+      - 44.1 kHz
+    * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000``
+      - 48 kHz
+    * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000``
+      - 32 kHz
+
+
+
+.. _v4l2-mpeg-audio-encoding:
+
+``V4L2_CID_MPEG_AUDIO_ENCODING``
+    (enum)
+
+enum v4l2_mpeg_audio_encoding -
+    MPEG Audio encoding. This control is specific to multiplexed MPEG
+    streams. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_1``
+      - MPEG-1/2 Layer I encoding
+    * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_2``
+      - MPEG-1/2 Layer II encoding
+    * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_3``
+      - MPEG-1/2 Layer III encoding
+    * - ``V4L2_MPEG_AUDIO_ENCODING_AAC``
+      - MPEG-2/4 AAC (Advanced Audio Coding)
+    * - ``V4L2_MPEG_AUDIO_ENCODING_AC3``
+      - AC-3 aka ATSC A/52 encoding
+
+
+
+.. _v4l2-mpeg-audio-l1-bitrate:
+
+``V4L2_CID_MPEG_AUDIO_L1_BITRATE``
+    (enum)
+
+enum v4l2_mpeg_audio_l1_bitrate -
+    MPEG-1/2 Layer I bitrate. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_32K``
+      - 32 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_64K``
+      - 64 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_96K``
+      - 96 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_128K``
+      - 128 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_160K``
+      - 160 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_192K``
+      - 192 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_224K``
+      - 224 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_256K``
+      - 256 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_288K``
+      - 288 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_320K``
+      - 320 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_352K``
+      - 352 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_384K``
+      - 384 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_416K``
+      - 416 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_448K``
+      - 448 kbit/s
+
+
+
+.. _v4l2-mpeg-audio-l2-bitrate:
+
+``V4L2_CID_MPEG_AUDIO_L2_BITRATE``
+    (enum)
+
+enum v4l2_mpeg_audio_l2_bitrate -
+    MPEG-1/2 Layer II bitrate. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_32K``
+      - 32 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_48K``
+      - 48 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_56K``
+      - 56 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_64K``
+      - 64 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_80K``
+      - 80 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_96K``
+      - 96 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_112K``
+      - 112 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_128K``
+      - 128 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_160K``
+      - 160 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_192K``
+      - 192 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_224K``
+      - 224 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_256K``
+      - 256 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_320K``
+      - 320 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_384K``
+      - 384 kbit/s
+
+
+
+.. _v4l2-mpeg-audio-l3-bitrate:
+
+``V4L2_CID_MPEG_AUDIO_L3_BITRATE``
+    (enum)
+
+enum v4l2_mpeg_audio_l3_bitrate -
+    MPEG-1/2 Layer III bitrate. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_32K``
+      - 32 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_40K``
+      - 40 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_48K``
+      - 48 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_56K``
+      - 56 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_64K``
+      - 64 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_80K``
+      - 80 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_96K``
+      - 96 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_112K``
+      - 112 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_128K``
+      - 128 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_160K``
+      - 160 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_192K``
+      - 192 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_224K``
+      - 224 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_256K``
+      - 256 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_320K``
+      - 320 kbit/s
+
+
+
+``V4L2_CID_MPEG_AUDIO_AAC_BITRATE (integer)``
+    AAC bitrate in bits per second.
+
+.. _v4l2-mpeg-audio-ac3-bitrate:
+
+``V4L2_CID_MPEG_AUDIO_AC3_BITRATE``
+    (enum)
+
+enum v4l2_mpeg_audio_ac3_bitrate -
+    AC-3 bitrate. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_32K``
+      - 32 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_40K``
+      - 40 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_48K``
+      - 48 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_56K``
+      - 56 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_64K``
+      - 64 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_80K``
+      - 80 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_96K``
+      - 96 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_112K``
+      - 112 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_128K``
+      - 128 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_160K``
+      - 160 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_192K``
+      - 192 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_224K``
+      - 224 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_256K``
+      - 256 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_320K``
+      - 320 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_384K``
+      - 384 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_448K``
+      - 448 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_512K``
+      - 512 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_576K``
+      - 576 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_640K``
+      - 640 kbit/s
+
+
+
+.. _v4l2-mpeg-audio-mode:
+
+``V4L2_CID_MPEG_AUDIO_MODE``
+    (enum)
+
+enum v4l2_mpeg_audio_mode -
+    MPEG Audio mode. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_MODE_STEREO``
+      - Stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_JOINT_STEREO``
+      - Joint Stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_DUAL``
+      - Bilingual
+    * - ``V4L2_MPEG_AUDIO_MODE_MONO``
+      - Mono
+
+
+
+.. _v4l2-mpeg-audio-mode-extension:
+
+``V4L2_CID_MPEG_AUDIO_MODE_EXTENSION``
+    (enum)
+
+enum v4l2_mpeg_audio_mode_extension -
+    Joint Stereo audio mode extension. In Layer I and II they indicate
+    which subbands are in intensity stereo. All other subbands are coded
+    in stereo. Layer III is not (yet) supported. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4``
+      - Subbands 4-31 in intensity stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8``
+      - Subbands 8-31 in intensity stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12``
+      - Subbands 12-31 in intensity stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16``
+      - Subbands 16-31 in intensity stereo
+
+
+
+.. _v4l2-mpeg-audio-emphasis:
+
+``V4L2_CID_MPEG_AUDIO_EMPHASIS``
+    (enum)
+
+enum v4l2_mpeg_audio_emphasis -
+    Audio Emphasis. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_EMPHASIS_NONE``
+      - None
+    * - ``V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS``
+      - 50/15 microsecond emphasis
+    * - ``V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17``
+      - CCITT J.17
+
+
+
+.. _v4l2-mpeg-audio-crc:
+
+``V4L2_CID_MPEG_AUDIO_CRC``
+    (enum)
+
+enum v4l2_mpeg_audio_crc -
+    CRC method. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_CRC_NONE``
+      - None
+    * - ``V4L2_MPEG_AUDIO_CRC_CRC16``
+      - 16 bit parity check
+
+
+
+``V4L2_CID_MPEG_AUDIO_MUTE (boolean)``
+    Mutes the audio when capturing. This is not done by muting audio
+    hardware, which can still produce a slight hiss, but in the encoder
+    itself, guaranteeing a fixed and reproducible audio bitstream. 0 =
+    unmuted, 1 = muted.
+
+.. _v4l2-mpeg-audio-dec-playback:
+
+``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK``
+    (enum)
+
+enum v4l2_mpeg_audio_dec_playback -
+    Determines how monolingual audio should be played back. Possible
+    values are:
+
+
+
+.. tabularcolumns:: |p{9.8cm}|p{7.7cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO``
+      - Automatically determines the best playback mode.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO``
+      - Stereo playback.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT``
+      - Left channel playback.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT``
+      - Right channel playback.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO``
+      - Mono playback.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO``
+      - Stereo playback with swapped left and right channels.
+
+
+
+.. _v4l2-mpeg-audio-dec-multilingual-playback:
+
+``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK``
+    (enum)
+
+enum v4l2_mpeg_audio_dec_playback -
+    Determines how multilingual audio should be played back.
+
+.. _v4l2-mpeg-video-encoding:
+
+``V4L2_CID_MPEG_VIDEO_ENCODING``
+    (enum)
+
+enum v4l2_mpeg_video_encoding -
+    MPEG Video encoding method. This control is specific to multiplexed
+    MPEG streams. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_1``
+      - MPEG-1 Video encoding
+    * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_2``
+      - MPEG-2 Video encoding
+    * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC``
+      - MPEG-4 AVC (H.264) Video encoding
+
+
+
+.. _v4l2-mpeg-video-aspect:
+
+``V4L2_CID_MPEG_VIDEO_ASPECT``
+    (enum)
+
+enum v4l2_mpeg_video_aspect -
+    Video aspect. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_ASPECT_1x1``
+    * - ``V4L2_MPEG_VIDEO_ASPECT_4x3``
+    * - ``V4L2_MPEG_VIDEO_ASPECT_16x9``
+    * - ``V4L2_MPEG_VIDEO_ASPECT_221x100``
+
+
+
+``V4L2_CID_MPEG_VIDEO_B_FRAMES (integer)``
+    Number of B-Frames (default 2)
+
+``V4L2_CID_MPEG_VIDEO_GOP_SIZE (integer)``
+    GOP size (default 12)
+
+``V4L2_CID_MPEG_VIDEO_GOP_CLOSURE (boolean)``
+    GOP closure (default 1)
+
+``V4L2_CID_MPEG_VIDEO_PULLDOWN (boolean)``
+    Enable 3:2 pulldown (default 0)
+
+.. _v4l2-mpeg-video-bitrate-mode:
+
+``V4L2_CID_MPEG_VIDEO_BITRATE_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_bitrate_mode -
+    Video bitrate mode. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_VBR``
+      - Variable bitrate
+    * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CBR``
+      - Constant bitrate
+
+
+
+``V4L2_CID_MPEG_VIDEO_BITRATE (integer)``
+    Video bitrate in bits per second.
+
+``V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (integer)``
+    Peak video bitrate in bits per second. Must be larger or equal to
+    the average video bitrate. It is ignored if the video bitrate mode
+    is set to constant bitrate.
+
+``V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (integer)``
+    For every captured frame, skip this many subsequent frames (default
+    0).
+
+``V4L2_CID_MPEG_VIDEO_MUTE (boolean)``
+    "Mutes" the video to a fixed color when capturing. This is useful
+    for testing, to produce a fixed video bitstream. 0 = unmuted, 1 =
+    muted.
+
+``V4L2_CID_MPEG_VIDEO_MUTE_YUV (integer)``
+    Sets the "mute" color of the video. The supplied 32-bit integer is
+    interpreted as follows (bit 0 = least significant bit):
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Bit 0:7
+      - V chrominance information
+    * - Bit 8:15
+      - U chrominance information
+    * - Bit 16:23
+      - Y luminance information
+    * - Bit 24:31
+      - Must be zero.
+
+
+
+.. _v4l2-mpeg-video-dec-pts:
+
+``V4L2_CID_MPEG_VIDEO_DEC_PTS (integer64)``
+    This read-only control returns the 33-bit video Presentation Time
+    Stamp as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1 of the
+    currently displayed frame. This is the same PTS as is used in
+    :ref:`VIDIOC_DECODER_CMD`.
+
+.. _v4l2-mpeg-video-dec-frame:
+
+``V4L2_CID_MPEG_VIDEO_DEC_FRAME (integer64)``
+    This read-only control returns the frame counter of the frame that
+    is currently displayed (decoded). This value is reset to 0 whenever
+    the decoder is started.
+
+``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)``
+    If enabled the decoder expects to receive a single slice per buffer,
+    otherwise the decoder expects a single frame in per buffer.
+    Applicable to the decoder, all codecs.
+
+``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)``
+    Enable writing sample aspect ratio in the Video Usability
+    Information. Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-vui-sar-idc:
+
+``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC``
+    (enum)
+
+enum v4l2_mpeg_video_h264_vui_sar_idc -
+    VUI sample aspect ratio indicator for H.264 encoding. The value is
+    defined in the table E-1 in the standard. Applicable to the H264
+    encoder.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED``
+      - Unspecified
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1``
+      - 1x1
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11``
+      - 12x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11``
+      - 10x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11``
+      - 16x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33``
+      - 40x33
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11``
+      - 24x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11``
+      - 20x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11``
+      - 32x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33``
+      - 80x33
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11``
+      - 18x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11``
+      - 15x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33``
+      - 64x33
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99``
+      - 160x99
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3``
+      - 4x3
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2``
+      - 3x2
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1``
+      - 2x1
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED``
+      - Extended SAR
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (integer)``
+    Extended sample aspect ratio width for H.264 VUI encoding.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (integer)``
+    Extended sample aspect ratio height for H.264 VUI encoding.
+    Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-level:
+
+``V4L2_CID_MPEG_VIDEO_H264_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_h264_level -
+    The level information for the H264 video elementary stream.
+    Applicable to the H264 encoder. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_0``
+      - Level 1.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1B``
+      - Level 1B
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_1``
+      - Level 1.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_2``
+      - Level 1.2
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_3``
+      - Level 1.3
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_0``
+      - Level 2.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_1``
+      - Level 2.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_2``
+      - Level 2.2
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_0``
+      - Level 3.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_1``
+      - Level 3.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_2``
+      - Level 3.2
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_0``
+      - Level 4.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_1``
+      - Level 4.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_2``
+      - Level 4.2
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_0``
+      - Level 5.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_1``
+      - Level 5.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_2``
+      - Level 5.2
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_6_0``
+      - Level 6.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_6_1``
+      - Level 6.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_6_2``
+      - Level 6.2
+
+
+
+.. _v4l2-mpeg-video-mpeg2-level:
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg2_level -
+    The level information for the MPEG2 elementary stream. Applicable to
+    MPEG2 codecs. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_LOW``
+      - Low Level (LL)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_MAIN``
+      - Main Level (ML)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH_1440``
+      - High-1440 Level (H-14)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH``
+      - High Level (HL)
+
+
+
+.. _v4l2-mpeg-video-mpeg4-level:
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg4_level -
+    The level information for the MPEG4 elementary stream. Applicable to
+    the MPEG4 encoder. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0``
+      - Level 0
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B``
+      - Level 0b
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_1``
+      - Level 1
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_2``
+      - Level 2
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3``
+      - Level 3
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B``
+      - Level 3b
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_4``
+      - Level 4
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_5``
+      - Level 5
+
+
+
+.. _v4l2-mpeg-video-h264-profile:
+
+``V4L2_CID_MPEG_VIDEO_H264_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_profile -
+    The profile information for H264. Applicable to the H264 encoder.
+    Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE``
+      - Baseline profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE``
+      - Constrained Baseline profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MAIN``
+      - Main profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED``
+      - Extended profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH``
+      - High profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10``
+      - High 10 profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422``
+      - High 422 profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE``
+      - High 444 Predictive profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA``
+      - High 10 Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA``
+      - High 422 Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA``
+      - High 444 Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA``
+      - CAVLC 444 Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE``
+      - Scalable Baseline profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH``
+      - Scalable High profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA``
+      - Scalable High Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH``
+      - Stereo High profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH``
+      - Multiview High profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH``
+      - Constrained High profile
+
+
+
+.. _v4l2-mpeg-video-mpeg2-profile:
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg2_profile -
+    The profile information for MPEG2. Applicable to MPEG2 codecs.
+    Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SIMPLE``
+      - Simple profile (SP)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MAIN``
+      - Main profile (MP)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SNR_SCALABLE``
+      - SNR Scalable profile (SNR)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SPATIALLY_SCALABLE``
+      - Spatially Scalable profile (Spt)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_HIGH``
+      - High profile (HP)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MULTIVIEW``
+      - Multi-view profile (MVP)
+
+
+
+.. _v4l2-mpeg-video-mpeg4-profile:
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg4_profile -
+    The profile information for MPEG4. Applicable to the MPEG4 encoder.
+    Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE``
+      - Simple profile
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE``
+      - Advanced Simple profile
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE``
+      - Core profile
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE``
+      - Simple Scalable profile
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY``
+      -
+
+
+
+``V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (integer)``
+    The maximum number of reference pictures used for encoding.
+    Applicable to the encoder.
+
+.. _v4l2-mpeg-video-multi-slice-mode:
+
+``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_multi_slice_mode -
+    Determines how the encoder should handle division of frame into
+    slices. Applicable to the encoder. Possible values are:
+
+
+
+.. tabularcolumns:: |p{9.6cm}|p{7.9cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE``
+      - Single slice per frame.
+    * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB``
+      - Multiple slices with set maximum number of macroblocks per slice.
+    * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES``
+      - Multiple slice with set maximum size in bytes per slice.
+
+
+
+``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB (integer)``
+    The maximum number of macroblocks in a slice. Used when
+    ``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` is set to
+    ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB``. Applicable to the
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES (integer)``
+    The maximum size of a slice in bytes. Used when
+    ``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` is set to
+    ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES``. Applicable to the
+    encoder.
+
+.. _v4l2-mpeg-video-h264-loop-filter-mode:
+
+``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_loop_filter_mode -
+    Loop filter mode for H264 encoder. Possible values are:
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{13.6cm}|p{3.9cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED``
+      - Loop filter is enabled.
+    * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED``
+      - Loop filter is disabled.
+    * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY``
+      - Loop filter is disabled at the slice boundary.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (integer)``
+    Loop filter alpha coefficient, defined in the H264 standard.
+    This value corresponds to the slice_alpha_c0_offset_div2 slice header
+    field, and should be in the range of -6 to +6, inclusive. The actual alpha
+    offset FilterOffsetA is twice this value.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (integer)``
+    Loop filter beta coefficient, defined in the H264 standard.
+    This corresponds to the slice_beta_offset_div2 slice header field, and
+    should be in the range of -6 to +6, inclusive. The actual beta offset
+    FilterOffsetB is twice this value.
+    Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-entropy-mode:
+
+``V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_entropy_mode -
+    Entropy coding mode for H264 - CABAC/CAVALC. Applicable to the H264
+    encoder. Possible values are:
+
+
+.. tabularcolumns:: |p{9.0cm}|p{8.5cm}|
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC``
+      - Use CAVLC entropy coding.
+    * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC``
+      - Use CABAC entropy coding.
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM (boolean)``
+    Enable 8X8 transform for H264. Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_CONSTRAINED_INTRA_PREDICTION (boolean)``
+    Enable constrained intra prediction for H264. Applicable to the H264
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_CHROMA_QP_INDEX_OFFSET (integer)``
+    Specify the offset that should be added to the luma quantization
+    parameter to determine the chroma quantization parameter. Applicable
+    to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB (integer)``
+    Cyclic intra macroblock refresh. This is the number of continuous
+    macroblocks refreshed every frame. Each frame a successive set of
+    macroblocks is refreshed until the cycle completes and starts from
+    the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
+
+``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)``
+    Frame level rate control enable. If this control is disabled then
+    the quantization parameter for each frame type is constant and set
+    with appropriate controls (e.g.
+    ``V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP``). If frame rate control is
+    enabled then quantization parameter is adjusted to meet the chosen
+    bitrate. Minimum and maximum value for the quantization parameter
+    can be set with appropriate controls (e.g.
+    ``V4L2_CID_MPEG_VIDEO_H263_MIN_QP``). Applicable to encoders.
+
+``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE (boolean)``
+    Macroblock level rate control enable. Applicable to the MPEG4 and
+    H264 encoders.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (boolean)``
+    Quarter pixel motion estimation for MPEG4. Applicable to the MPEG4
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for H263. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_H263_MIN_QP (integer)``
+    Minimum quantization parameter for H263. Valid range: from 1 to 31.
+
+``V4L2_CID_MPEG_VIDEO_H263_MAX_QP (integer)``
+    Maximum quantization parameter for H263. Valid range: from 1 to 31.
+
+``V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (integer)``
+    Quantization parameter for an P frame for H263. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (integer)``
+    Quantization parameter for an B frame for H263. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for H264. Valid range: from 0
+    to 51.
+
+``V4L2_CID_MPEG_VIDEO_H264_MIN_QP (integer)``
+    Minimum quantization parameter for H264. Valid range: from 0 to 51.
+
+``V4L2_CID_MPEG_VIDEO_H264_MAX_QP (integer)``
+    Maximum quantization parameter for H264. Valid range: from 0 to 51.
+
+``V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP (integer)``
+    Quantization parameter for an P frame for H264. Valid range: from 0
+    to 51.
+
+``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP (integer)``
+    Quantization parameter for an B frame for H264. Valid range: from 0
+    to 51.
+
+``V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP (integer)``
+    Minimum quantization parameter for the H264 I frame to limit I frame
+    quality to a range. Valid range: from 0 to 51. If
+    V4L2_CID_MPEG_VIDEO_H264_MIN_QP is also set, the quantization parameter
+    should be chosen to meet both requirements.
+
+``V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP (integer)``
+    Maximum quantization parameter for the H264 I frame to limit I frame
+    quality to a range. Valid range: from 0 to 51. If
+    V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter
+    should be chosen to meet both requirements.
+
+``V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP (integer)``
+    Minimum quantization parameter for the H264 P frame to limit P frame
+    quality to a range. Valid range: from 0 to 51. If
+    V4L2_CID_MPEG_VIDEO_H264_MIN_QP is also set, the quantization parameter
+    should be chosen to meet both requirements.
+
+``V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP (integer)``
+    Maximum quantization parameter for the H264 P frame to limit P frame
+    quality to a range. Valid range: from 0 to 51. If
+    V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter
+    should be chosen to meet both requirements.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for MPEG4. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP (integer)``
+    Minimum quantization parameter for MPEG4. Valid range: from 1 to 31.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP (integer)``
+    Maximum quantization parameter for MPEG4. Valid range: from 1 to 31.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (integer)``
+    Quantization parameter for an P frame for MPEG4. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (integer)``
+    Quantization parameter for an B frame for MPEG4. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_VBV_SIZE (integer)``
+    The Video Buffer Verifier size in kilobytes, it is used as a
+    limitation of frame skip. The VBV is defined in the standard as a
+    mean to verify that the produced stream will be successfully
+    decoded. The standard describes it as "Part of a hypothetical
+    decoder that is conceptually connected to the output of the encoder.
+    Its purpose is to provide a constraint on the variability of the
+    data rate that an encoder or editing process may produce.".
+    Applicable to the MPEG1, MPEG2, MPEG4 encoders.
+
+.. _v4l2-mpeg-video-vbv-delay:
+
+``V4L2_CID_MPEG_VIDEO_VBV_DELAY (integer)``
+    Sets the initial delay in milliseconds for VBV buffer control.
+
+.. _v4l2-mpeg-video-hor-search-range:
+
+``V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE (integer)``
+    Horizontal search range defines maximum horizontal search area in
+    pixels to search and match for the present Macroblock (MB) in the
+    reference picture. This V4L2 control macro is used to set horizontal
+    search range for motion estimation module in video encoder.
+
+.. _v4l2-mpeg-video-vert-search-range:
+
+``V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (integer)``
+    Vertical search range defines maximum vertical search area in pixels
+    to search and match for the present Macroblock (MB) in the reference
+    picture. This V4L2 control macro is used to set vertical search
+    range for motion estimation module in video encoder.
+
+.. _v4l2-mpeg-video-force-key-frame:
+
+``V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (button)``
+    Force a key frame for the next queued buffer. Applicable to
+    encoders. This is a general, codec-agnostic keyframe control.
+
+``V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (integer)``
+    The Coded Picture Buffer size in kilobytes, it is used as a
+    limitation of frame skip. The CPB is defined in the H264 standard as
+    a mean to verify that the produced stream will be successfully
+    decoded. Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_I_PERIOD (integer)``
+    Period between I-frames in the open GOP for H264. In case of an open
+    GOP this is the period between two I-frames. The period between IDR
+    (Instantaneous Decoding Refresh) frames is taken from the GOP_SIZE
+    control. An IDR frame, which stands for Instantaneous Decoding
+    Refresh is an I-frame after which no prior frames are referenced.
+    This means that a stream can be restarted from an IDR frame without
+    the need to store or decode any previous frames. Applicable to the
+    H264 encoder.
+
+.. _v4l2-mpeg-video-header-mode:
+
+``V4L2_CID_MPEG_VIDEO_HEADER_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_header_mode -
+    Determines whether the header is returned as the first buffer or is
+    it returned together with the first frame. Applicable to encoders.
+    Possible values are:
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{10.3cm}|p{7.2cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE``
+      - The stream header is returned separately in the first buffer.
+    * - ``V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME``
+      - The stream header is returned together with the first encoded
+	frame.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER (boolean)``
+    Repeat the video sequence headers. Repeating these headers makes
+    random access to the video stream easier. Applicable to the MPEG1, 2
+    and 4 encoder.
+
+``V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER (boolean)``
+    Enabled the deblocking post processing filter for MPEG4 decoder.
+    Applicable to the MPEG4 decoder.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_RES (integer)``
+    vop_time_increment_resolution value for MPEG4. Applicable to the
+    MPEG4 encoder.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_INC (integer)``
+    vop_time_increment value for MPEG4. Applicable to the MPEG4
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING (boolean)``
+    Enable generation of frame packing supplemental enhancement
+    information in the encoded bitstream. The frame packing SEI message
+    contains the arrangement of L and R planes for 3D viewing.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0 (boolean)``
+    Sets current frame as frame0 in frame packing SEI. Applicable to the
+    H264 encoder.
+
+.. _v4l2-mpeg-video-h264-sei-fp-arrangement-type:
+
+``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_sei_fp_arrangement_type -
+    Frame packing arrangement type for H264 SEI. Applicable to the H264
+    encoder. Possible values are:
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{12cm}|p{5.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHEKERBOARD``
+      - Pixels are alternatively from L and R.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN``
+      - L and R are interlaced by column.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW``
+      - L and R are interlaced by row.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE``
+      - L is on the left, R on the right.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM``
+      - L is on top, R on bottom.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL``
+      - One view per frame.
+
+.. raw:: latex
+
+    \normalsize
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO (boolean)``
+    Enables flexible macroblock ordering in the encoded bitstream. It is
+    a technique used for restructuring the ordering of macroblocks in
+    pictures. Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-fmo-map-type:
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE``
+   (enum)
+
+enum v4l2_mpeg_video_h264_fmo_map_type -
+    When using FMO, the map type divides the image in different scan
+    patterns of macroblocks. Applicable to the H264 encoder. Possible
+    values are:
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{12.5cm}|p{5.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES``
+      - Slices are interleaved one after other with macroblocks in run
+	length order.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES``
+      - Scatters the macroblocks based on a mathematical function known to
+	both encoder and decoder.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER``
+      - Macroblocks arranged in rectangular areas or regions of interest.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT``
+      - Slice groups grow in a cyclic way from centre to outwards.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN``
+      - Slice groups grow in raster scan pattern from left to right.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN``
+      - Slice groups grow in wipe scan pattern from top to bottom.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT``
+      - User defined map type.
+
+.. raw:: latex
+
+    \normalsize
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP (integer)``
+    Number of slice groups in FMO. Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-fmo-change-direction:
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION``
+    (enum)
+
+enum v4l2_mpeg_video_h264_fmo_change_dir -
+    Specifies a direction of the slice group change for raster and wipe
+    maps. Applicable to the H264 encoder. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT``
+      - Raster scan or wipe right.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT``
+      - Reverse raster scan or wipe left.
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE (integer)``
+    Specifies the size of the first slice group for raster and wipe map.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH (integer)``
+    Specifies the number of consecutive macroblocks for the interleaved
+    map. Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_ASO (boolean)``
+    Enables arbitrary slice ordering in encoded bitstream. Applicable to
+    the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER (integer)``
+    Specifies the slice order in ASO. Applicable to the H264 encoder.
+    The supplied 32-bit integer is interpreted as follows (bit 0 = least
+    significant bit):
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Bit 0:15
+      - Slice ID
+    * - Bit 16:32
+      - Slice position or order
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING (boolean)``
+    Enables H264 hierarchical coding. Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-hierarchical-coding-type:
+
+``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_hierarchical_coding_type -
+    Specifies the hierarchical coding type. Applicable to the H264
+    encoder. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B``
+      - Hierarchical B coding.
+    * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P``
+      - Hierarchical P coding.
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER (integer)``
+    Specifies the number of hierarchical coding layers. Applicable to
+    the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (integer)``
+    Specifies a user defined QP for each layer. Applicable to the H264
+    encoder. The supplied 32-bit integer is interpreted as follows (bit
+    0 = least significant bit):
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Bit 0:15
+      - QP value
+    * - Bit 16:32
+      - Layer number
+
+
+.. _v4l2-mpeg-h264:
+
+``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
+    Specifies the sequence parameter set (as extracted from the
+    bitstream) for the associated H264 slice data. This includes the
+    necessary parameters for configuring a stateless hardware decoding
+    pipeline for H264. The bitstream parameters are defined according
+    to :ref:`h264`, section 7.4.2.1.1 "Sequence Parameter Set Data
+    Semantics". For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_sps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_sps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``profile_idc``
+      -
+    * - __u8
+      - ``constraint_set_flags``
+      - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>`
+    * - __u8
+      - ``level_idc``
+      -
+    * - __u8
+      - ``seq_parameter_set_id``
+      -
+    * - __u8
+      - ``chroma_format_idc``
+      -
+    * - __u8
+      - ``bit_depth_luma_minus8``
+      -
+    * - __u8
+      - ``bit_depth_chroma_minus8``
+      -
+    * - __u8
+      - ``log2_max_frame_num_minus4``
+      -
+    * - __u8
+      - ``pic_order_cnt_type``
+      -
+    * - __u8
+      - ``log2_max_pic_order_cnt_lsb_minus4``
+      -
+    * - __u8
+      - ``max_num_ref_frames``
+      -
+    * - __u8
+      - ``num_ref_frames_in_pic_order_cnt_cycle``
+      -
+    * - __s32
+      - ``offset_for_ref_frame[255]``
+      -
+    * - __s32
+      - ``offset_for_non_ref_pic``
+      -
+    * - __s32
+      - ``offset_for_top_to_bottom_field``
+      -
+    * - __u16
+      - ``pic_width_in_mbs_minus1``
+      -
+    * - __u16
+      - ``pic_height_in_map_units_minus1``
+      -
+    * - __u32
+      - ``flags``
+      - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>`
+
+.. _h264_sps_constraints_set_flags:
+
+``Sequence Parameter Set Constraints Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG``
+      - 0x00000020
+      -
+
+.. _h264_sps_flags:
+
+``Sequence Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD``
+      - 0x00000020
+      -
+    * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE``
+      - 0x00000040
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)``
+    Specifies the picture parameter set (as extracted from the
+    bitstream) for the associated H264 slice data. This includes the
+    necessary parameters for configuring a stateless hardware decoding
+    pipeline for H264.  The bitstream parameters are defined according
+    to :ref:`h264`, section 7.4.2.2 "Picture Parameter Set RBSP
+    Semantics". For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_pps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_pps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``pic_parameter_set_id``
+      -
+    * - __u8
+      - ``seq_parameter_set_id``
+      -
+    * - __u8
+      - ``num_slice_groups_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l0_default_active_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l1_default_active_minus1``
+      -
+    * - __u8
+      - ``weighted_bipred_idc``
+      -
+    * - __s8
+      - ``pic_init_qp_minus26``
+      -
+    * - __s8
+      - ``pic_init_qs_minus26``
+      -
+    * - __s8
+      - ``chroma_qp_index_offset``
+      -
+    * - __s8
+      - ``second_chroma_qp_index_offset``
+      -
+    * - __u16
+      - ``flags``
+      - See :ref:`Picture Parameter Set Flags <h264_pps_flags>`
+
+.. _h264_pps_flags:
+
+``Picture Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT``
+      - 0x00000020
+      -
+    * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
+      - 0x00000040
+      -
+    * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT``
+      - 0x00000080
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)``
+    Specifies the scaling matrix (as extracted from the bitstream) for
+    the associated H264 slice data. The bitstream parameters are
+    defined according to :ref:`h264`, section 7.4.2.1.1.1 "Scaling
+    List Semantics". For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_scaling_matrix
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``scaling_list_4x4[6][16]``
+      - Scaling matrix after applying the inverse scanning process.
+        Expected list order is Intra Y, Intra Cb, Intra Cr, Inter Y,
+        Inter Cb, Inter Cr.
+    * - __u8
+      - ``scaling_list_8x8[6][64]``
+      - Scaling matrix after applying the inverse scanning process.
+        Expected list order is Intra Y, Inter Y, Intra Cb, Inter Cb,
+        Intra Cr, Inter Cr.
+
+``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)``
+    Specifies the slice parameters (as extracted from the bitstream)
+    for the associated H264 slice data. This includes the necessary
+    parameters for configuring a stateless hardware decoding pipeline
+    for H264.  The bitstream parameters are defined according to
+    :ref:`h264`, section 7.4.3 "Slice Header Semantics". For further
+    documentation, refer to the above specification, unless there is
+    an explicit comment stating otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API
+       and it is expected to change.
+
+       This structure is expected to be passed as an array, with one
+       entry for each slice included in the bitstream buffer.
+
+.. c:type:: v4l2_ctrl_h264_slice_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_slice_params
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``size``
+      -
+    * - __u32
+      - ``start_byte_offset``
+        Offset (in bytes) from the beginning of the OUTPUT buffer to the start
+        of the slice. If the slice starts with a start code, then this is the
+        offset to such start code. When operating in slice-based decoding mode
+        (see :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field should
+        be set to 0. When operating in frame-based decoding mode, this field
+        should be 0 for the first slice.
+    * - __u32
+      - ``header_bit_size``
+      -
+    * - __u16
+      - ``first_mb_in_slice``
+      -
+    * - __u8
+      - ``slice_type``
+      -
+    * - __u8
+      - ``pic_parameter_set_id``
+      -
+    * - __u8
+      - ``colour_plane_id``
+      -
+    * - __u8
+      - ``redundant_pic_cnt``
+      -
+    * - __u16
+      - ``frame_num``
+      -
+    * - __u16
+      - ``idr_pic_id``
+      -
+    * - __u16
+      - ``pic_order_cnt_lsb``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt_bottom``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt0``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt1``
+      -
+    * - struct :c:type:`v4l2_h264_pred_weight_table`
+      - ``pred_weight_table``
+      -
+    * - __u32
+      - ``dec_ref_pic_marking_bit_size``
+      - Size in bits of the dec_ref_pic_marking() syntax element.
+    * - __u32
+      - ``pic_order_cnt_bit_size``
+      -
+    * - __u8
+      - ``cabac_init_idc``
+      -
+    * - __s8
+      - ``slice_qp_delta``
+      -
+    * - __s8
+      - ``slice_qs_delta``
+      -
+    * - __u8
+      - ``disable_deblocking_filter_idc``
+      -
+    * - __s8
+      - ``slice_alpha_c0_offset_div2``
+      -
+    * - __s8
+      - ``slice_beta_offset_div2``
+      -
+    * - __u8
+      - ``num_ref_idx_l0_active_minus1``
+      - If num_ref_idx_active_override_flag is not set, this field must be
+        set to the value of num_ref_idx_l0_default_active_minus1.
+    * - __u8
+      - ``num_ref_idx_l1_active_minus1``
+      - If num_ref_idx_active_override_flag is not set, this field must be
+        set to the value of num_ref_idx_l1_default_active_minus1.
+    * - __u32
+      - ``slice_group_change_cycle``
+      -
+    * - __u8
+      - ``ref_pic_list0[32]``
+      - Reference picture list after applying the per-slice modifications
+    * - __u8
+      - ``ref_pic_list1[32]``
+      - Reference picture list after applying the per-slice modifications
+    * - __u32
+      - ``flags``
+      - See :ref:`Slice Parameter Flags <h264_slice_flags>`
+
+.. _h264_slice_flags:
+
+``Slice Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
+      - 0x00000008
+      -
+
+``Prediction Weight Table``
+
+    The bitstream parameters are defined according to :ref:`h264`,
+    section 7.4.3.2 "Prediction Weight Table Semantics". For further
+    documentation, refer to the above specification, unless there is
+    an explicit comment stating otherwise.
+
+.. c:type:: v4l2_h264_pred_weight_table
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_pred_weight_table
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u16
+      - ``luma_log2_weight_denom``
+      -
+    * - __u16
+      - ``chroma_log2_weight_denom``
+      -
+    * - struct :c:type:`v4l2_h264_weight_factors`
+      - ``weight_factors[2]``
+      - The weight factors at index 0 are the weight factors for the reference
+        list 0, the one at index 1 for the reference list 1.
+
+.. c:type:: v4l2_h264_weight_factors
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_weight_factors
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __s16
+      - ``luma_weight[32]``
+      -
+    * - __s16
+      - ``luma_offset[32]``
+      -
+    * - __s16
+      - ``chroma_weight[32][2]``
+      -
+    * - __s16
+      - ``chroma_offset[32][2]``
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)``
+    Specifies the decode parameters (as extracted from the bitstream)
+    for the associated H264 slice data. This includes the necessary
+    parameters for configuring a stateless hardware decoding pipeline
+    for H264. The bitstream parameters are defined according to
+    :ref:`h264`. For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_decode_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_decode_params
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - struct :c:type:`v4l2_h264_dpb_entry`
+      - ``dpb[16]``
+      -
+    * - __u16
+      - ``num_slices``
+      - Number of slices needed to decode the current frame/field. When
+        operating in slice-based decoding mode (see
+        :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field
+        should always be set to one.
+    * - __u16
+      - ``nal_ref_idc``
+      - NAL reference ID value coming from the NAL Unit header
+    * - __s32
+      - ``top_field_order_cnt``
+      - Picture Order Count for the coded top field
+    * - __s32
+      - ``bottom_field_order_cnt``
+      - Picture Order Count for the coded bottom field
+    * - __u32
+      - ``flags``
+      - See :ref:`Decode Parameters Flags <h264_decode_params_flags>`
+
+.. _h264_decode_params_flags:
+
+``Decode Parameters Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC``
+      - 0x00000001
+      - That picture is an IDR picture
+
+.. c:type:: v4l2_h264_dpb_entry
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_dpb_entry
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u64
+      - ``reference_ts``
+      - Timestamp of the V4L2 capture buffer to use as reference, used
+        with B-coded and P-coded frames. The timestamp refers to the
+        ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+        :c:func:`v4l2_timeval_to_ns()` function to convert the struct
+        :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+    * - __u16
+      - ``frame_num``
+      -
+    * - __u16
+      - ``pic_num``
+      -
+    * - __s32
+      - ``top_field_order_cnt``
+      -
+    * - __s32
+      - ``bottom_field_order_cnt``
+      -
+    * - __u32
+      - ``flags``
+      - See :ref:`DPB Entry Flags <h264_dpb_flags>`
+
+.. _h264_dpb_flags:
+
+``DPB Entries Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
+      - 0x00000001
+      - The DPB entry is valid and should be considered
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
+      - 0x00000002
+      - The DPB entry is currently being used as a reference frame
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
+      - 0x00000004
+      - The DPB entry is a long term reference frame
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD``
+      - 0x00000008
+      - The DPB entry is a field reference, which means only one of the field
+        will be used when decoding the new frame/field. When not set the DPB
+        entry is a frame reference (both fields will be used). Note that this
+        flag does not say anything about the number of fields contained in the
+        reference frame, it just describes the one used to decode the new
+        field/frame
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD``
+      - 0x00000010
+      - The DPB entry is a bottom field reference (only the bottom field of the
+        reference frame is needed to decode the new frame/field). Only valid if
+        V4L2_H264_DPB_ENTRY_FLAG_FIELD is set. When
+        V4L2_H264_DPB_ENTRY_FLAG_FIELD is set but
+        V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD is not, that means the
+        DPB entry is a top field reference
+
+``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)``
+    Specifies the decoding mode to use. Currently exposes slice-based and
+    frame-based decoding but new modes might be added later on.
+    This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE
+    pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE
+    are required to set this control in order to specify the decoding mode
+    that is expected for the buffer.
+    Drivers may expose a single or multiple decoding modes, depending
+    on what they can support.
+
+    .. note::
+
+       This menu control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_mpeg_video_h264_decode_mode
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED``
+      - 0
+      - Decoding is done at the slice granularity.
+        In this mode, ``num_slices`` field in struct
+        :c:type:`v4l2_ctrl_h264_decode_params` should be set to 1,
+        and ``start_byte_offset`` in struct
+        :c:type:`v4l2_ctrl_h264_slice_params` should be set to 0.
+        The OUTPUT buffer must contain a single slice.
+    * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED``
+      - 1
+      - Decoding is done at the frame granularity.
+        In this mode, ``num_slices`` field in struct
+        :c:type:`v4l2_ctrl_h264_decode_params` should be set to the number
+        of slices in the frame, and ``start_byte_offset`` in struct
+        :c:type:`v4l2_ctrl_h264_slice_params` should be set accordingly
+        for each slice. For the first slice, ``start_byte_offset`` should
+        be zero.
+        The OUTPUT buffer must contain all slices needed to decode the
+        frame. The OUTPUT buffer must also contain both fields.
+
+``V4L2_CID_MPEG_VIDEO_H264_START_CODE (enum)``
+    Specifies the H264 slice start code expected for each slice.
+    This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE
+    pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE
+    are required to set this control in order to specify the start code
+    that is expected for the buffer.
+    Drivers may expose a single or multiple start codes, depending
+    on what they can support.
+
+    .. note::
+
+       This menu control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_mpeg_video_h264_start_code
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_MPEG_VIDEO_H264_START_CODE_NONE``
+      - 0
+      - Selecting this value specifies that H264 slices are passed
+        to the driver without any start code.
+    * - ``V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B``
+      - 1
+      - Selecting this value specifies that H264 slices are expected
+        to be prefixed by Annex B start codes. According to :ref:`h264`
+        valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
+
+.. _v4l2-mpeg-mpeg2:
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS (struct)``
+    Specifies the slice parameters (as extracted from the bitstream) for the
+    associated MPEG-2 slice data. This includes the necessary parameters for
+    configuring a stateless hardware decoding pipeline for MPEG-2.
+    The bitstream parameters are defined according to :ref:`mpeg2part2`.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_mpeg2_slice_params
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
+
+.. flat-table:: struct v4l2_ctrl_mpeg2_slice_params
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``bit_size``
+      - Size (in bits) of the current slice data.
+    * - __u32
+      - ``data_bit_offset``
+      - Offset (in bits) to the video data in the current slice data.
+    * - struct :c:type:`v4l2_mpeg2_sequence`
+      - ``sequence``
+      - Structure with MPEG-2 sequence metadata, merging relevant fields from
+	the sequence header and sequence extension parts of the bitstream.
+    * - struct :c:type:`v4l2_mpeg2_picture`
+      - ``picture``
+      - Structure with MPEG-2 picture metadata, merging relevant fields from
+	the picture header and picture coding extension parts of the bitstream.
+    * - __u64
+      - ``backward_ref_ts``
+      - Timestamp of the V4L2 capture buffer to use as backward reference, used
+        with B-coded and P-coded frames. The timestamp refers to the
+	``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+	:c:func:`v4l2_timeval_to_ns()` function to convert the struct
+	:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+    * - __u64
+      - ``forward_ref_ts``
+      - Timestamp for the V4L2 capture buffer to use as forward reference, used
+        with B-coded frames. The timestamp refers to the ``timestamp`` field in
+	struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
+	function to convert the struct :c:type:`timeval` in struct
+	:c:type:`v4l2_buffer` to a __u64.
+    * - __u32
+      - ``quantiser_scale_code``
+      - Code used to determine the quantization scale to use for the IDCT.
+
+.. c:type:: v4l2_mpeg2_sequence
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_mpeg2_sequence
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u16
+      - ``horizontal_size``
+      - The width of the displayable part of the frame's luminance component.
+    * - __u16
+      - ``vertical_size``
+      - The height of the displayable part of the frame's luminance component.
+    * - __u32
+      - ``vbv_buffer_size``
+      - Used to calculate the required size of the video buffering verifier,
+	defined (in bits) as: 16 * 1024 * vbv_buffer_size.
+    * - __u16
+      - ``profile_and_level_indication``
+      - The current profile and level indication as extracted from the
+	bitstream.
+    * - __u8
+      - ``progressive_sequence``
+      - Indication that all the frames for the sequence are progressive instead
+	of interlaced.
+    * - __u8
+      - ``chroma_format``
+      - The chrominance sub-sampling format (1: 4:2:0, 2: 4:2:2, 3: 4:4:4).
+
+.. c:type:: v4l2_mpeg2_picture
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_mpeg2_picture
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``picture_coding_type``
+      - Picture coding type for the frame covered by the current slice
+	(V4L2_MPEG2_PICTURE_CODING_TYPE_I, V4L2_MPEG2_PICTURE_CODING_TYPE_P or
+	V4L2_MPEG2_PICTURE_CODING_TYPE_B).
+    * - __u8
+      - ``f_code[2][2]``
+      - Motion vector codes.
+    * - __u8
+      - ``intra_dc_precision``
+      - Precision of Discrete Cosine transform (0: 8 bits precision,
+	1: 9 bits precision, 2: 10 bits precision, 3: 11 bits precision).
+    * - __u8
+      - ``picture_structure``
+      - Picture structure (1: interlaced top field, 2: interlaced bottom field,
+	3: progressive frame).
+    * - __u8
+      - ``top_field_first``
+      - If set to 1 and interlaced stream, top field is output first.
+    * - __u8
+      - ``frame_pred_frame_dct``
+      - If set to 1, only frame-DCT and frame prediction are used.
+    * - __u8
+      - ``concealment_motion_vectors``
+      -  If set to 1, motion vectors are coded for intra macroblocks.
+    * - __u8
+      - ``q_scale_type``
+      - This flag affects the inverse quantization process.
+    * - __u8
+      - ``intra_vlc_format``
+      - This flag affects the decoding of transform coefficient data.
+    * - __u8
+      - ``alternate_scan``
+      - This flag affects the decoding of transform coefficient data.
+    * - __u8
+      - ``repeat_first_field``
+      - This flag affects the decoding process of progressive frames.
+    * - __u16
+      - ``progressive_frame``
+      - Indicates whether the current frame is progressive.
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION (struct)``
+    Specifies quantization matrices (as extracted from the bitstream) for the
+    associated MPEG-2 slice data.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_mpeg2_quantization
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.2cm}|p{8.0cm}|p{7.4cm}|
+
+.. raw:: latex
+
+    \small
+
+.. flat-table:: struct v4l2_ctrl_mpeg2_quantization
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``load_intra_quantiser_matrix``
+      - One bit to indicate whether to load the ``intra_quantiser_matrix`` data.
+    * - __u8
+      - ``load_non_intra_quantiser_matrix``
+      - One bit to indicate whether to load the ``non_intra_quantiser_matrix``
+	data.
+    * - __u8
+      - ``load_chroma_intra_quantiser_matrix``
+      - One bit to indicate whether to load the
+	``chroma_intra_quantiser_matrix`` data, only relevant for non-4:2:0 YUV
+	formats.
+    * - __u8
+      - ``load_chroma_non_intra_quantiser_matrix``
+      - One bit to indicate whether to load the
+	``chroma_non_intra_quantiser_matrix`` data, only relevant for non-4:2:0
+	YUV formats.
+    * - __u8
+      - ``intra_quantiser_matrix[64]``
+      - The quantization matrix coefficients for intra-coded frames, in zigzag
+	scanning order. It is relevant for both luma and chroma components,
+	although it can be superseded by the chroma-specific matrix for
+	non-4:2:0 YUV formats.
+    * - __u8
+      - ``non_intra_quantiser_matrix[64]``
+      - The quantization matrix coefficients for non-intra-coded frames, in
+	zigzag scanning order. It is relevant for both luma and chroma
+	components, although it can be superseded by the chroma-specific matrix
+	for non-4:2:0 YUV formats.
+    * - __u8
+      - ``chroma_intra_quantiser_matrix[64]``
+      - The quantization matrix coefficients for the chominance component of
+	intra-coded frames, in zigzag scanning order. Only relevant for
+	non-4:2:0 YUV formats.
+    * - __u8
+      - ``chroma_non_intra_quantiser_matrix[64]``
+      - The quantization matrix coefficients for the chrominance component of
+	non-intra-coded frames, in zigzag scanning order. Only relevant for
+	non-4:2:0 YUV formats.
+
+``V4L2_CID_FWHT_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for FWHT. Valid range: from 1
+    to 31.
+
+``V4L2_CID_FWHT_P_FRAME_QP (integer)``
+    Quantization parameter for a P frame for FWHT. Valid range: from 1
+    to 31.
+
+.. _v4l2-mpeg-vp8:
+
+``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (struct)``
+    Specifies the frame parameters for the associated VP8 parsed frame data.
+    This includes the necessary parameters for
+    configuring a stateless hardware decoding pipeline for VP8.
+    The bitstream parameters are defined according to :ref:`vp8`.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_vp8_frame_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
+
+.. flat-table:: struct v4l2_ctrl_vp8_frame_header
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - struct :c:type:`v4l2_vp8_segment_header`
+      - ``segment_header``
+      - Structure with segment-based adjustments metadata.
+    * - struct :c:type:`v4l2_vp8_loopfilter_header`
+      - ``loopfilter_header``
+      - Structure with loop filter level adjustments metadata.
+    * - struct :c:type:`v4l2_vp8_quantization_header`
+      - ``quant_header``
+      - Structure with VP8 dequantization indices metadata.
+    * - struct :c:type:`v4l2_vp8_entropy_header`
+      - ``entropy_header``
+      - Structure with VP8 entropy coder probabilities metadata.
+    * - struct :c:type:`v4l2_vp8_entropy_coder_state`
+      - ``coder_state``
+      - Structure with VP8 entropy coder state.
+    * - __u16
+      - ``width``
+      - The width of the frame. Must be set for all frames.
+    * - __u16
+      - ``height``
+      - The height of the frame. Must be set for all frames.
+    * - __u8
+      - ``horizontal_scale``
+      - Horizontal scaling factor.
+    * - __u8
+      - ``vertical_scaling factor``
+      - Vertical scale.
+    * - __u8
+      - ``version``
+      - Bitstream version.
+    * - __u8
+      - ``prob_skip_false``
+      - Indicates the probability that the macroblock is not skipped.
+    * - __u8
+      - ``prob_intra``
+      - Indicates the probability that a macroblock is intra-predicted.
+    * - __u8
+      - ``prob_last``
+      - Indicates the probability that the last reference frame is used
+        for inter-prediction
+    * - __u8
+      - ``prob_gf``
+      - Indicates the probability that the golden reference frame is used
+        for inter-prediction
+    * - __u8
+      - ``num_dct_parts``
+      - Number of DCT coefficients partitions. Must be one of: 1, 2, 4, or 8.
+    * - __u32
+      - ``first_part_size``
+      - Size of the first partition, i.e. the control partition.
+    * - __u32
+      - ``first_part_header_bits``
+      - Size in bits of the first partition header portion.
+    * - __u32
+      - ``dct_part_sizes[8]``
+      - DCT coefficients sizes.
+    * - __u64
+      - ``last_frame_ts``
+      - Timestamp for the V4L2 capture buffer to use as last reference frame, used
+        with inter-coded frames. The timestamp refers to the ``timestamp`` field in
+	struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
+	function to convert the struct :c:type:`timeval` in struct
+	:c:type:`v4l2_buffer` to a __u64.
+    * - __u64
+      - ``golden_frame_ts``
+      - Timestamp for the V4L2 capture buffer to use as last reference frame, used
+        with inter-coded frames. The timestamp refers to the ``timestamp`` field in
+	struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
+	function to convert the struct :c:type:`timeval` in struct
+	:c:type:`v4l2_buffer` to a __u64.
+    * - __u64
+      - ``alt_frame_ts``
+      - Timestamp for the V4L2 capture buffer to use as alternate reference frame, used
+        with inter-coded frames. The timestamp refers to the ``timestamp`` field in
+	struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
+	function to convert the struct :c:type:`timeval` in struct
+	:c:type:`v4l2_buffer` to a __u64.
+    * - __u64
+      - ``flags``
+      - See :ref:`Frame Header Flags <vp8_frame_header_flags>`
+
+.. _vp8_frame_header_flags:
+
+``Frame Header Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME``
+      - 0x01
+      - Indicates if the frame is a key frame.
+    * - ``V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL``
+      - 0x02
+      - Experimental bitstream.
+    * - ``V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME``
+      - 0x04
+      - Show frame flag, indicates if the frame is for display.
+    * - ``V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF``
+      - 0x08
+      - Enable/disable skipping of macroblocks with no non-zero coefficients.
+    * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN``
+      - 0x10
+      - Sign of motion vectors when the golden frame is referenced.
+    * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT``
+      - 0x20
+      - Sign of motion vectors when the alt frame is referenced.
+
+.. c:type:: v4l2_vp8_entropy_coder_state
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_entropy_coder_state
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``range``
+      -
+    * - __u8
+      - ``value``
+      -
+    * - __u8
+      - ``bit_count``
+      -
+    * - __u8
+      - ``padding``
+      - Applications and drivers must set this to zero.
+
+.. c:type:: v4l2_vp8_segment_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_segment_header
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __s8
+      - ``quant_update[4]``
+      - Signed quantizer value update.
+    * - __s8
+      - ``lf_update[4]``
+      - Signed loop filter level value update.
+    * - __u8
+      - ``segment_probs[3]``
+      - Segment probabilities.
+    * - __u8
+      - ``padding``
+      - Applications and drivers must set this to zero.
+    * - __u32
+      - ``flags``
+      - See :ref:`Segment Header Flags <vp8_segment_header_flags>`
+
+.. _vp8_segment_header_flags:
+
+``Segment Header Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED``
+      - 0x01
+      - Enable/disable segment-based adjustments.
+    * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP``
+      - 0x02
+      - Indicates if the macroblock segmentation map is updated in this frame.
+    * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA``
+      - 0x04
+      - Indicates if the segment feature data is updated in this frame.
+    * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE``
+      - 0x08
+      - If is set, the segment feature data mode is delta-value.
+        If cleared, it's absolute-value.
+
+.. c:type:: v4l2_vp8_loopfilter_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_loopfilter_header
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __s8
+      - ``ref_frm_delta[4]``
+      - Reference adjustment (signed) delta value.
+    * - __s8
+      - ``mb_mode_delta[4]``
+      - Macroblock prediction mode adjustment (signed) delta value.
+    * - __u8
+      - ``sharpness_level``
+      - Sharpness level
+    * - __u8
+      - ``level``
+      - Filter level
+    * - __u16
+      - ``padding``
+      - Applications and drivers must set this to zero.
+    * - __u32
+      - ``flags``
+      - See :ref:`Loopfilter Header Flags <vp8_loopfilter_header_flags>`
+
+.. _vp8_loopfilter_header_flags:
+
+``Loopfilter Header Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_VP8_LF_HEADER_ADJ_ENABLE``
+      - 0x01
+      - Enable/disable macroblock-level loop filter adjustment.
+    * - ``V4L2_VP8_LF_HEADER_DELTA_UPDATE``
+      - 0x02
+      - Indicates if the delta values used in an adjustment are updated.
+    * - ``V4L2_VP8_LF_FILTER_TYPE_SIMPLE``
+      - 0x04
+      - If set, indicates the filter type is simple.
+        If cleared, the filter type is normal.
+
+.. c:type:: v4l2_vp8_quantization_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_quantization_header
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``y_ac_qi``
+      - Luma AC coefficient table index.
+    * - __s8
+      - ``y_dc_delta``
+      - Luma DC delta vaue.
+    * - __s8
+      - ``y2_dc_delta``
+      - Y2 block DC delta value.
+    * - __s8
+      - ``y2_ac_delta``
+      - Y2 block AC delta value.
+    * - __s8
+      - ``uv_dc_delta``
+      - Chroma DC delta value.
+    * - __s8
+      - ``uv_ac_delta``
+      - Chroma AC delta value.
+    * - __u16
+      - ``padding``
+      - Applications and drivers must set this to zero.
+
+.. c:type:: v4l2_vp8_entropy_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_entropy_header
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``coeff_probs[4][8][3][11]``
+      - Coefficient update probabilities.
+    * - __u8
+      - ``y_mode_probs[4]``
+      - Luma mode update probabilities.
+    * - __u8
+      - ``uv_mode_probs[3]``
+      - Chroma mode update probabilities.
+    * - __u8
+      - ``mv_probs[2][19]``
+      - MV decoding update probabilities.
+    * - __u8
+      - ``padding[3]``
+      - Applications and drivers must set this to zero.
+
+.. raw:: latex
+
+    \normalsize
+
+
+MFC 5.1 MPEG Controls
+=====================
+
+The following MPEG class controls deal with MPEG decoding and encoding
+settings that are specific to the Multi Format Codec 5.1 device present
+in the S5P family of SoCs by Samsung.
+
+
+.. _mfc51-control-id:
+
+MFC 5.1 Control IDs
+-------------------
+
+``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE (boolean)``
+    If the display delay is enabled then the decoder is forced to return
+    a CAPTURE buffer (decoded frame) after processing a certain number
+    of OUTPUT buffers. The delay can be set through
+    ``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY``. This
+    feature can be used for example for generating thumbnails of videos.
+    Applicable to the H264 decoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (integer)``
+    Display delay value for H264 decoder. The decoder is forced to
+    return a decoded frame after the set 'display delay' number of
+    frames. If this number is low it may result in frames returned out
+    of display order, in addition the hardware may still be using the
+    returned buffer as a reference picture for subsequent frames.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (integer)``
+    The number of reference pictures used for encoding a P picture.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_PADDING (boolean)``
+    Padding enable in the encoder - use a color instead of repeating
+    border pixels. Applicable to encoders.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV (integer)``
+    Padding color in the encoder. Applicable to encoders. The supplied
+    32-bit integer is interpreted as follows (bit 0 = least significant
+    bit):
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Bit 0:7
+      - V chrominance information
+    * - Bit 8:15
+      - U chrominance information
+    * - Bit 16:23
+      - Y luminance information
+    * - Bit 24:31
+      - Must be zero.
+
+
+
+``V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (integer)``
+    Reaction coefficient for MFC rate control. Applicable to encoders.
+
+    .. note::
+
+       #. Valid only when the frame level RC is enabled.
+
+       #. For tight CBR, this field must be small (ex. 2 ~ 10). For
+	  VBR, this field must be large (ex. 100 ~ 1000).
+
+       #. It is not recommended to use the greater number than
+	  FRAME_RATE * (10^9 / BIT_RATE).
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (boolean)``
+    Adaptive rate control for dark region. Valid only when H.264 and
+    macroblock level RC is enabled
+    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
+    encoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH (boolean)``
+    Adaptive rate control for smooth region. Valid only when H.264 and
+    macroblock level RC is enabled
+    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
+    encoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (boolean)``
+    Adaptive rate control for static region. Valid only when H.264 and
+    macroblock level RC is enabled
+    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
+    encoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY (boolean)``
+    Adaptive rate control for activity region. Valid only when H.264 and
+    macroblock level RC is enabled
+    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
+    encoder.
+
+.. _v4l2-mpeg-mfc51-video-frame-skip-mode:
+
+``V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE``
+    (enum)
+
+enum v4l2_mpeg_mfc51_video_frame_skip_mode -
+    Indicates in what conditions the encoder should skip frames. If
+    encoding a frame would cause the encoded stream to be larger then a
+    chosen data limit then the frame will be skipped. Possible values
+    are:
+
+
+.. tabularcolumns:: |p{9.2cm}|p{8.3cm}|
+
+.. raw:: latex
+
+    \small
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED``
+      - Frame skip mode is disabled.
+    * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT``
+      - Frame skip mode enabled and buffer limit is set by the chosen
+	level and is defined by the standard.
+    * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT``
+      - Frame skip mode enabled and buffer limit is set by the VBV
+	(MPEG1/2/4) or CPB (H264) buffer size control.
+
+.. raw:: latex
+
+    \normalsize
+
+``V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT (integer)``
+    Enable rate-control with fixed target bit. If this setting is
+    enabled, then the rate control logic of the encoder will calculate
+    the average bitrate for a GOP and keep it below or equal the set
+    bitrate target. Otherwise the rate control logic calculates the
+    overall average bitrate for the stream and keeps it below or equal
+    to the set bitrate. In the first case the average bitrate for the
+    whole stream will be smaller then the set bitrate. This is caused
+    because the average is calculated for smaller number of frames, on
+    the other hand enabling this setting will ensure that the stream
+    will meet tight bandwidth constraints. Applicable to encoders.
+
+.. _v4l2-mpeg-mfc51-video-force-frame-type:
+
+``V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE``
+    (enum)
+
+enum v4l2_mpeg_mfc51_video_force_frame_type -
+    Force a frame type for the next queued buffer. Applicable to
+    encoders. Possible values are:
+
+.. tabularcolumns:: |p{9.5cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_DISABLED``
+      - Forcing a specific frame type disabled.
+    * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_I_FRAME``
+      - Force an I-frame.
+    * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_NOT_CODED``
+      - Force a non-coded frame.
+
+
+.. _v4l2-mpeg-fwht:
+
+``V4L2_CID_MPEG_VIDEO_FWHT_PARAMS (struct)``
+    Specifies the fwht parameters (as extracted from the bitstream) for the
+    associated FWHT data. This includes the necessary parameters for
+    configuring a stateless hardware decoding pipeline for FWHT.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_fwht_params
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.4cm}|p{4.3cm}|p{11.8cm}|
+
+.. flat-table:: struct v4l2_ctrl_fwht_params
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u64
+      - ``backward_ref_ts``
+      - Timestamp of the V4L2 capture buffer to use as backward reference, used
+        with P-coded frames. The timestamp refers to the
+	``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+	:c:func:`v4l2_timeval_to_ns()` function to convert the struct
+	:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+    * - __u32
+      - ``version``
+      - The version of the codec
+    * - __u32
+      - ``width``
+      - The width of the frame
+    * - __u32
+      - ``height``
+      - The height of the frame
+    * - __u32
+      - ``flags``
+      - The flags of the frame, see :ref:`fwht-flags`.
+    * - __u32
+      - ``colorspace``
+      - The colorspace of the frame, from enum :c:type:`v4l2_colorspace`.
+    * - __u32
+      - ``xfer_func``
+      - The transfer function, from enum :c:type:`v4l2_xfer_func`.
+    * - __u32
+      - ``ycbcr_enc``
+      - The Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`.
+    * - __u32
+      - ``quantization``
+      - The quantization range, from enum :c:type:`v4l2_quantization`.
+
+
+
+.. _fwht-flags:
+
+FWHT Flags
+============
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.3cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``FWHT_FL_IS_INTERLACED``
+      - 0x00000001
+      - Set if this is an interlaced format
+    * - ``FWHT_FL_IS_BOTTOM_FIRST``
+      - 0x00000002
+      - Set if this is a bottom-first (NTSC) interlaced format
+    * - ``FWHT_FL_IS_ALTERNATE``
+      - 0x00000004
+      - Set if each 'frame' contains just one field
+    * - ``FWHT_FL_IS_BOTTOM_FIELD``
+      - 0x00000008
+      - If FWHT_FL_IS_ALTERNATE was set, then this is set if this 'frame' is the
+	bottom field, else it is the top field.
+    * - ``FWHT_FL_LUMA_IS_UNCOMPRESSED``
+      - 0x00000010
+      - Set if the luma plane is uncompressed
+    * - ``FWHT_FL_CB_IS_UNCOMPRESSED``
+      - 0x00000020
+      - Set if the cb plane is uncompressed
+    * - ``FWHT_FL_CR_IS_UNCOMPRESSED``
+      - 0x00000040
+      - Set if the cr plane is uncompressed
+    * - ``FWHT_FL_CHROMA_FULL_HEIGHT``
+      - 0x00000080
+      - Set if the chroma plane has the same height as the luma plane,
+	else the chroma plane is half the height of the luma plane
+    * - ``FWHT_FL_CHROMA_FULL_WIDTH``
+      - 0x00000100
+      - Set if the chroma plane has the same width as the luma plane,
+	else the chroma plane is half the width of the luma plane
+    * - ``FWHT_FL_ALPHA_IS_UNCOMPRESSED``
+      - 0x00000200
+      - Set if the alpha plane is uncompressed
+    * - ``FWHT_FL_I_FRAME``
+      - 0x00000400
+      - Set if this is an I-frame
+    * - ``FWHT_FL_COMPONENTS_NUM_MSK``
+      - 0x00070000
+      - A 4-values flag - the number of components - 1
+    * - ``FWHT_FL_PIXENC_YUV``
+      - 0x00080000
+      - Set if the pixel encoding is YUV
+    * - ``FWHT_FL_PIXENC_RGB``
+      - 0x00100000
+      - Set if the pixel encoding is RGB
+    * - ``FWHT_FL_PIXENC_HSV``
+      - 0x00180000
+      - Set if the pixel encoding is HSV
+
+
+CX2341x MPEG Controls
+=====================
+
+The following MPEG class controls deal with MPEG encoding settings that
+are specific to the Conexant CX23415 and CX23416 MPEG encoding chips.
+
+
+.. _cx2341x-control-id:
+
+CX2341x Control IDs
+-------------------
+
+.. _v4l2-mpeg-cx2341x-video-spatial-filter-mode:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_spatial_filter_mode -
+    Sets the Spatial Filter mode (default ``MANUAL``). Possible values
+    are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL``
+      - Choose the filter manually
+    * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO``
+      - Choose the filter automatically
+
+
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER (integer (0-15))``
+    The setting for the Spatial Filter. 0 = off, 15 = maximum. (Default
+    is 0.)
+
+.. _luma-spatial-filter-type:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type -
+    Select the algorithm to use for the Luma Spatial Filter (default
+    ``1D_HOR``). Possible values:
+
+.. tabularcolumns:: |p{14.5cm}|p{3.0cm}|
+
+.. raw:: latex
+
+    \small
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF``
+      - No filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR``
+      - One-dimensional horizontal
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT``
+      - One-dimensional vertical
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE``
+      - Two-dimensional separable
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE``
+      - Two-dimensional symmetrical non-separable
+
+.. raw:: latex
+
+    \normalsize
+
+
+
+.. _chroma-spatial-filter-type:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type -
+    Select the algorithm for the Chroma Spatial Filter (default
+    ``1D_HOR``). Possible values are:
+
+
+.. tabularcolumns:: |p{14.0cm}|p{3.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF``
+      - No filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR``
+      - One-dimensional horizontal
+
+
+
+.. _v4l2-mpeg-cx2341x-video-temporal-filter-mode:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_temporal_filter_mode -
+    Sets the Temporal Filter mode (default ``MANUAL``). Possible values
+    are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL``
+      - Choose the filter manually
+    * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO``
+      - Choose the filter automatically
+
+
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (integer (0-31))``
+    The setting for the Temporal Filter. 0 = off, 31 = maximum. (Default
+    is 8 for full-scale capturing and 0 for scaled capturing.)
+
+.. _v4l2-mpeg-cx2341x-video-median-filter-type:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_median_filter_type -
+    Median Filter Type (default ``OFF``). Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF``
+      - No filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR``
+      - Horizontal filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT``
+      - Vertical filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT``
+      - Horizontal and vertical filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG``
+      - Diagonal filter
+
+
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (integer (0-255))``
+    Threshold above which the luminance median filter is enabled
+    (default 0)
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP (integer (0-255))``
+    Threshold below which the luminance median filter is enabled
+    (default 255)
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (integer (0-255))``
+    Threshold above which the chroma median filter is enabled (default
+    0)
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (integer (0-255))``
+    Threshold below which the chroma median filter is enabled (default
+    255)
+
+``V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (boolean)``
+    The CX2341X MPEG encoder can insert one empty MPEG-2 PES packet into
+    the stream between every four video frames. The packet size is 2048
+    bytes, including the packet_start_code_prefix and stream_id
+    fields. The stream_id is 0xBF (private stream 2). The payload
+    consists of 0x00 bytes, to be filled in by the application. 0 = do
+    not insert, 1 = insert packets.
+
+
+VPX Control Reference
+=====================
+
+The VPX controls include controls for encoding parameters of VPx video
+codec.
+
+
+.. _vpx-control-id:
+
+VPX Control IDs
+---------------
+
+.. _v4l2-vpx-num-partitions:
+
+``V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS``
+    (enum)
+
+enum v4l2_vp8_num_partitions -
+    The number of token partitions to use in VP8 encoder. Possible
+    values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION``
+      - 1 coefficient partition
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS``
+      - 2 coefficient partitions
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS``
+      - 4 coefficient partitions
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS``
+      - 8 coefficient partitions
+
+
+
+``V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 (boolean)``
+    Setting this prevents intra 4x4 mode in the intra mode decision.
+
+.. _v4l2-vpx-num-ref-frames:
+
+``V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES``
+    (enum)
+
+enum v4l2_vp8_num_ref_frames -
+    The number of reference pictures for encoding P frames. Possible
+    values are:
+
+.. tabularcolumns:: |p{7.9cm}|p{9.6cm}|
+
+.. raw:: latex
+
+    \small
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME``
+      - Last encoded frame will be searched
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME``
+      - Two frames will be searched among the last encoded frame, the
+	golden frame and the alternate reference (altref) frame. The
+	encoder implementation will decide which two are chosen.
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME``
+      - The last encoded frame, the golden frame and the altref frame will
+	be searched.
+
+.. raw:: latex
+
+    \normalsize
+
+
+
+``V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL (integer)``
+    Indicates the loop filter level. The adjustment of the loop filter
+    level is done via a delta value against a baseline loop filter
+    value.
+
+``V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS (integer)``
+    This parameter affects the loop filter. Anything above zero weakens
+    the deblocking effect on the loop filter.
+
+``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD (integer)``
+    Sets the refresh period for the golden frame. The period is defined
+    in number of frames. For a value of 'n', every nth frame starting
+    from the first key frame will be taken as a golden frame. For eg.
+    for encoding sequence of 0, 1, 2, 3, 4, 5, 6, 7 where the golden
+    frame refresh period is set as 4, the frames 0, 4, 8 etc will be
+    taken as the golden frames as frame 0 is always a key frame.
+
+.. _v4l2-vpx-golden-frame-sel:
+
+``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL``
+    (enum)
+
+enum v4l2_vp8_golden_frame_sel -
+    Selects the golden frame for encoding. Possible values are:
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV``
+      - Use the (n-2)th frame as a golden frame, current frame index being
+	'n'.
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD``
+      - Use the previous specific frame indicated by
+	``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD`` as a
+	golden frame.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (integer)``
+    Minimum quantization parameter for VP8.
+
+``V4L2_CID_MPEG_VIDEO_VPX_MAX_QP (integer)``
+    Maximum quantization parameter for VP8.
+
+``V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for VP8.
+
+``V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (integer)``
+    Quantization parameter for a P frame for VP8.
+
+.. _v4l2-mpeg-video-vp8-profile:
+
+``V4L2_CID_MPEG_VIDEO_VP8_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_vp8_profile -
+    This control allows selecting the profile for VP8 encoder.
+    This is also used to enumerate supported profiles by VP8 encoder or decoder.
+    Possible values are:
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_0``
+      - Profile 0
+    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_1``
+      - Profile 1
+    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_2``
+      - Profile 2
+    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3``
+      - Profile 3
+
+.. _v4l2-mpeg-video-vp9-profile:
+
+``V4L2_CID_MPEG_VIDEO_VP9_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_vp9_profile -
+    This control allows selecting the profile for VP9 encoder.
+    This is also used to enumerate supported profiles by VP9 encoder or decoder.
+    Possible values are:
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0``
+      - Profile 0
+    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1``
+      - Profile 1
+    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2``
+      - Profile 2
+    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3``
+      - Profile 3
+
+
+High Efficiency Video Coding (HEVC/H.265) Control Reference
+===========================================================
+
+The HEVC/H.265 controls include controls for encoding parameters of HEVC/H.265
+video codec.
+
+
+.. _hevc-control-id:
+
+HEVC/H.265 Control IDs
+----------------------
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)``
+    Minimum quantization parameter for HEVC.
+    Valid range: from 0 to 51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)``
+    Maximum quantization parameter for HEVC.
+    Valid range: from 0 to 51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for HEVC.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (integer)``
+    Quantization parameter for a P frame for HEVC.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (integer)``
+    Quantization parameter for a B frame for HEVC.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)``
+    HIERARCHICAL_QP allows the host to specify the quantization parameter
+    values for each temporal layer through HIERARCHICAL_QP_LAYER. This is
+    valid only if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the
+    control value to 1 enables setting of the QP values for the layers.
+
+.. _v4l2-hevc-hier-coding-type:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_hier_coding_type -
+    Selects the hierarchical coding type for encoding. Possible values are:
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B``
+      - Use the B frame for hierarchical coding.
+    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P``
+      - Use the P frame for hierarchical coding.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (integer)``
+    Selects the hierarchical coding layer. In normal encoding
+    (non-hierarchial coding), it should be zero. Possible values are [0, 6].
+    0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING
+    LAYER 1 and so on.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 0.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 1.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 2.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 3.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 4.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 5.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 6.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+.. _v4l2-hevc-profile:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_profile -
+    Select the desired profile for HEVC encoder.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN``
+      - Main profile.
+    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE``
+      - Main still picture profile.
+    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10``
+      - Main 10 profile.
+
+.. raw:: latex
+
+    \normalsize
+
+
+.. _v4l2-hevc-level:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_level -
+    Selects the desired level for HEVC encoder.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``
+      - Level 1.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``
+      - Level 2.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``
+      - Level 2.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``
+      - Level 3.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``
+      - Level 3.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``
+      - Level 4.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``
+      - Level 4.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``
+      - Level 5.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``
+      - Level 5.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``
+      - Level 5.2
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``
+      - Level 6.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``
+      - Level 6.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``
+      - Level 6.2
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)``
+    Indicates the number of evenly spaced subintervals, called ticks, within
+    one second. This is a 16 bit unsigned integer and has a maximum value up to
+    0xffff and a minimum value of 1.
+
+.. _v4l2-hevc-tier:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TIER``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_tier -
+    TIER_FLAG specifies tiers information of the HEVC encoded picture. Tier
+    were made to deal with applications that differ in terms of maximum bit
+    rate. Setting the flag to 0 selects HEVC tier as Main tier and setting
+    this flag to 1 indicates High tier. High tier is for applications requiring
+    high bit rates.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN``
+      - Main tier.
+    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH``
+      - High tier.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)``
+    Selects HEVC maximum coding unit depth.
+
+.. _v4l2-hevc-loop-filter-mode:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_loop_filter_mode -
+    Loop filter mode for HEVC encoder. Possible values are:
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{12.1cm}|p{5.4cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED``
+      - Loop filter is disabled.
+    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED``
+      - Loop filter is enabled.
+    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY``
+      - Loop filter is disabled at the slice boundary.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (integer)``
+    Selects HEVC loop filter beta offset. The valid range is [-6, +6].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (integer)``
+    Selects HEVC loop filter tc offset. The valid range is [-6, +6].
+
+.. _v4l2-hevc-refresh-type:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_hier_refresh_type -
+    Selects refresh type for HEVC encoder.
+    Host has to specify the period into
+    V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{8.0cm}|p{9.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE``
+      - Use the B frame for hierarchical coding.
+    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA``
+      - Use CRA (Clean Random Access Unit) picture encoding.
+    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR``
+      - Use IDR (Instantaneous Decoding Refresh) picture encoding.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (integer)``
+    Selects the refresh period for HEVC encoder.
+    This specifies the number of I pictures between two CRA/IDR pictures.
+    This is valid only if REFRESH_TYPE is not 0.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (boolean)``
+    Indicates HEVC lossless encoding. Setting it to 0 disables lossless
+    encoding. Setting it to 1 enables lossless encoding.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (boolean)``
+    Indicates constant intra prediction for HEVC encoder. Specifies the
+    constrained intra prediction in which intra largest coding unit (LCU)
+    prediction is performed by using residual data and decoded samples of
+    neighboring intra LCU only. Setting the value to 1 enables constant intra
+    prediction and setting the value to 0 disables constant intra prediction.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (boolean)``
+    Indicates wavefront parallel processing for HEVC encoder. Setting it to 0
+    disables the feature and setting it to 1 enables the wavefront parallel
+    processing.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (boolean)``
+    Setting the value to 1 enables combination of P and B frame for HEVC
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (boolean)``
+    Indicates temporal identifier for HEVC encoder which is enabled by
+    setting the value to 1.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (boolean)``
+    Indicates bi-linear interpolation is conditionally used in the intra
+    prediction filtering process in the CVS when set to 1. Indicates bi-linear
+    interpolation is not used in the CVS when set to 0.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (integer)``
+    Indicates maximum number of merge candidate motion vectors.
+    Values are from 0 to 4.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (boolean)``
+    Indicates temporal motion vector prediction for HEVC encoder. Setting it to
+    1 enables the prediction. Setting it to 0 disables the prediction.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (boolean)``
+    Specifies if HEVC generates a stream with a size of the length field
+    instead of start code pattern. The size of the length field is configurable
+    through the V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control. Setting
+    the value to 0 disables encoding without startcode pattern. Setting the
+    value to 1 will enables encoding without startcode pattern.
+
+.. _v4l2-hevc-size-of-length-field:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD``
+(enum)
+
+enum v4l2_mpeg_video_hevc_size_of_length_field -
+    Indicates the size of length field.
+    This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{6.0cm}|p{11.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0``
+      - Generate start code pattern (Normal).
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1``
+      - Generate size of length field instead of start code pattern and length is 1.
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2``
+      - Generate size of length field instead of start code pattern and length is 2.
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4``
+      - Generate size of length field instead of start code pattern and length is 4.
+
+.. raw:: latex
+
+    \normalsize
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 0 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 1 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 2 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 3 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 4 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 5 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 6 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (integer)``
+    Selects number of P reference pictures required for HEVC encoder.
+    P-Frame can use 1 or 2 frames for reference.
+
+``V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (integer)``
+    Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
+    disables generating SPS and PPS at every IDR. Setting it to one enables
+    generating SPS and PPS at every IDR.
+
+.. _v4l2-mpeg-hevc:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_SPS (struct)``
+    Specifies the Sequence Parameter Set fields (as extracted from the
+    bitstream) for the associated HEVC slice data.
+    These bitstream parameters are defined according to :ref:`hevc`.
+    They are described in section 7.4.3.2 "Sequence parameter set RBSP
+    semantics" of the specification.
+
+.. c:type:: v4l2_ctrl_hevc_sps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_sps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u16
+      - ``pic_width_in_luma_samples``
+      -
+    * - __u16
+      - ``pic_height_in_luma_samples``
+      -
+    * - __u8
+      - ``bit_depth_luma_minus8``
+      -
+    * - __u8
+      - ``bit_depth_chroma_minus8``
+      -
+    * - __u8
+      - ``log2_max_pic_order_cnt_lsb_minus4``
+      -
+    * - __u8
+      - ``sps_max_dec_pic_buffering_minus1``
+      -
+    * - __u8
+      - ``sps_max_num_reorder_pics``
+      -
+    * - __u8
+      - ``sps_max_latency_increase_plus1``
+      -
+    * - __u8
+      - ``log2_min_luma_coding_block_size_minus3``
+      -
+    * - __u8
+      - ``log2_diff_max_min_luma_coding_block_size``
+      -
+    * - __u8
+      - ``log2_min_luma_transform_block_size_minus2``
+      -
+    * - __u8
+      - ``log2_diff_max_min_luma_transform_block_size``
+      -
+    * - __u8
+      - ``max_transform_hierarchy_depth_inter``
+      -
+    * - __u8
+      - ``max_transform_hierarchy_depth_intra``
+      -
+    * - __u8
+      - ``pcm_sample_bit_depth_luma_minus1``
+      -
+    * - __u8
+      - ``pcm_sample_bit_depth_chroma_minus1``
+      -
+    * - __u8
+      - ``log2_min_pcm_luma_coding_block_size_minus3``
+      -
+    * - __u8
+      - ``log2_diff_max_min_pcm_luma_coding_block_size``
+      -
+    * - __u8
+      - ``num_short_term_ref_pic_sets``
+      -
+    * - __u8
+      - ``num_long_term_ref_pics_sps``
+      -
+    * - __u8
+      - ``chroma_format_idc``
+      -
+    * - __u64
+      - ``flags``
+      - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>`
+
+.. _hevc_sps_flags:
+
+``Sequence Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE``
+      - 0x00000001
+      -
+    * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED``
+      - 0x00000002
+      -
+    * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED``
+      - 0x00000004
+      -
+    * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET``
+      - 0x00000008
+      -
+    * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED``
+      - 0x00000010
+      -
+    * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED``
+      - 0x00000020
+      -
+    * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT``
+      - 0x00000040
+      -
+    * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED``
+      - 0x00000080
+      -
+    * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED``
+      - 0x00000100
+      -
+
+``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)``
+    Specifies the Picture Parameter Set fields (as extracted from the
+    bitstream) for the associated HEVC slice data.
+    These bitstream parameters are defined according to :ref:`hevc`.
+    They are described in section 7.4.3.3 "Picture parameter set RBSP
+    semantics" of the specification.
+
+.. c:type:: v4l2_ctrl_hevc_pps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_pps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``num_extra_slice_header_bits``
+      -
+    * - __s8
+      - ``init_qp_minus26``
+      -
+    * - __u8
+      - ``diff_cu_qp_delta_depth``
+      -
+    * - __s8
+      - ``pps_cb_qp_offset``
+      -
+    * - __s8
+      - ``pps_cr_qp_offset``
+      -
+    * - __u8
+      - ``num_tile_columns_minus1``
+      -
+    * - __u8
+      - ``num_tile_rows_minus1``
+      -
+    * - __u8
+      - ``column_width_minus1[20]``
+      -
+    * - __u8
+      - ``row_height_minus1[22]``
+      -
+    * - __s8
+      - ``pps_beta_offset_div2``
+      -
+    * - __s8
+      - ``pps_tc_offset_div2``
+      -
+    * - __u8
+      - ``log2_parallel_merge_level_minus2``
+      -
+    * - __u8
+      - ``padding[4]``
+      - Applications and drivers must set this to zero.
+    * - __u64
+      - ``flags``
+      - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>`
+
+.. _hevc_pps_flags:
+
+``Picture Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT``
+      - 0x00000001
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
+      - 0x00000002
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED``
+      - 0x00000004
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT``
+      - 0x00000008
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED``
+      - 0x00000010
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED``
+      - 0x00000020
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED``
+      - 0x00000040
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT``
+      - 0x00000080
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED``
+      - 0x00000100
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED``
+      - 0x00000200
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED``
+      - 0x00000400
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED``
+      - 0x00000800
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED``
+      - 0x00001000
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED``
+      - 0x00002000
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED``
+      - 0x00004000
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED``
+      - 0x00008000
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER``
+      - 0x00010000
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT``
+      - 0x00020000
+      -
+    * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT``
+      - 0x00040000
+      -
+
+``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)``
+    Specifies various slice-specific parameters, especially from the NAL unit
+    header, general slice segment header and weighted prediction parameter
+    parts of the bitstream.
+    These bitstream parameters are defined according to :ref:`hevc`.
+    They are described in section 7.4.7 "General slice segment header
+    semantics" of the specification.
+
+.. c:type:: v4l2_ctrl_hevc_slice_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_slice_params
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``bit_size``
+      - Size (in bits) of the current slice data.
+    * - __u32
+      - ``data_bit_offset``
+      - Offset (in bits) to the video data in the current slice data.
+    * - __u8
+      - ``nal_unit_type``
+      -
+    * - __u8
+      - ``nuh_temporal_id_plus1``
+      -
+    * - __u8
+      - ``slice_type``
+      -
+	(V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or
+	V4L2_HEVC_SLICE_TYPE_B).
+    * - __u8
+      - ``colour_plane_id``
+      -
+    * - __u16
+      - ``slice_pic_order_cnt``
+      -
+    * - __u8
+      - ``num_ref_idx_l0_active_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l1_active_minus1``
+      -
+    * - __u8
+      - ``collocated_ref_idx``
+      -
+    * - __u8
+      - ``five_minus_max_num_merge_cand``
+      -
+    * - __s8
+      - ``slice_qp_delta``
+      -
+    * - __s8
+      - ``slice_cb_qp_offset``
+      -
+    * - __s8
+      - ``slice_cr_qp_offset``
+      -
+    * - __s8
+      - ``slice_act_y_qp_offset``
+      -
+    * - __s8
+      - ``slice_act_cb_qp_offset``
+      -
+    * - __s8
+      - ``slice_act_cr_qp_offset``
+      -
+    * - __s8
+      - ``slice_beta_offset_div2``
+      -
+    * - __s8
+      - ``slice_tc_offset_div2``
+      -
+    * - __u8
+      - ``pic_struct``
+      -
+    * - __u8
+      - ``num_active_dpb_entries``
+      - The number of entries in ``dpb``.
+    * - __u8
+      - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+      - The list of L0 reference elements as indices in the DPB.
+    * - __u8
+      - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+      - The list of L1 reference elements as indices in the DPB.
+    * - __u8
+      - ``num_rps_poc_st_curr_before``
+      - The number of reference pictures in the short-term set that come before
+        the current frame.
+    * - __u8
+      - ``num_rps_poc_st_curr_after``
+      - The number of reference pictures in the short-term set that come after
+        the current frame.
+    * - __u8
+      - ``num_rps_poc_lt_curr``
+      - The number of reference pictures in the long-term set.
+    * - __u8
+      - ``padding[7]``
+      - Applications and drivers must set this to zero.
+    * - struct :c:type:`v4l2_hevc_dpb_entry`
+      - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+      - The decoded picture buffer, for meta-data about reference frames.
+    * - struct :c:type:`v4l2_hevc_pred_weight_table`
+      - ``pred_weight_table``
+      - The prediction weight coefficients for inter-picture prediction.
+    * - __u64
+      - ``flags``
+      - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>`
+
+.. _hevc_slice_params_flags:
+
+``Slice Parameters Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA``
+      - 0x00000001
+      -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA``
+      - 0x00000002
+      -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED``
+      - 0x00000004
+      -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO``
+      - 0x00000008
+      -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT``
+      - 0x00000010
+      -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0``
+      - 0x00000020
+      -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV``
+      - 0x00000040
+      -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED``
+      - 0x00000080
+      -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
+      - 0x00000100
+      -
+
+.. c:type:: v4l2_hevc_dpb_entry
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_hevc_dpb_entry
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u64
+      - ``timestamp``
+      - Timestamp of the V4L2 capture buffer to use as reference, used
+        with B-coded and P-coded frames. The timestamp refers to the
+	``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+	:c:func:`v4l2_timeval_to_ns()` function to convert the struct
+	:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+    * - __u8
+      - ``rps``
+      - The reference set for the reference frame
+        (V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_BEFORE,
+        V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_AFTER or
+        V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR)
+    * - __u8
+      - ``field_pic``
+      - Whether the reference is a field picture or a frame.
+    * - __u16
+      - ``pic_order_cnt[2]``
+      - The picture order count of the reference. Only the first element of the
+        array is used for frame pictures, while the first element identifies the
+        top field and the second the bottom field in field-coded pictures.
+    * - __u8
+      - ``padding[2]``
+      - Applications and drivers must set this to zero.
+
+.. c:type:: v4l2_hevc_pred_weight_table
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_hevc_pred_weight_table
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``luma_log2_weight_denom``
+      -
+    * - __s8
+      - ``delta_chroma_log2_weight_denom``
+      -
+    * - __s8
+      - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+      -
+    * - __s8
+      - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+      -
+    * - __s8
+      - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+      -
+    * - __s8
+      - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+      -
+    * - __s8
+      - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+      -
+    * - __s8
+      - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+      -
+    * - __s8
+      - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+      -
+    * - __s8
+      - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+      -
+    * - __u8
+      - ``padding[6]``
+      - Applications and drivers must set this to zero.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)``
+    Specifies the decoding mode to use. Currently exposes slice-based and
+    frame-based decoding but new modes might be added later on.
+    This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
+    pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
+    are required to set this control in order to specify the decoding mode
+    that is expected for the buffer.
+    Drivers may expose a single or multiple decoding modes, depending
+    on what they can support.
+
+    .. note::
+
+       This menu control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_mpeg_video_hevc_decode_mode
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED``
+      - 0
+      - Decoding is done at the slice granularity.
+        The OUTPUT buffer must contain a single slice.
+    * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED``
+      - 1
+      - Decoding is done at the frame granularity.
+        The OUTPUT buffer must contain all slices needed to decode the
+        frame. The OUTPUT buffer must also contain both fields.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)``
+    Specifies the HEVC slice start code expected for each slice.
+    This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
+    pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
+    are required to set this control in order to specify the start code
+    that is expected for the buffer.
+    Drivers may expose a single or multiple start codes, depending
+    on what they can support.
+
+    .. note::
+
+       This menu control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_mpeg_video_hevc_start_code
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE``
+      - 0
+      - Selecting this value specifies that HEVC slices are passed
+        to the driver without any start code.
+    * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B``
+      - 1
+      - Selecting this value specifies that HEVC slices are expected
+        to be prefixed by Annex B start codes. According to :ref:`hevc`
+        valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst
new file mode 100644
index 000000000000..77a4992f26bd
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst
@@ -0,0 +1,71 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _detect-controls:
+
+************************
+Detect Control Reference
+************************
+
+The Detect class includes controls for common features of various motion
+or object detection capable devices.
+
+
+.. _detect-control-id:
+
+Detect Control IDs
+==================
+
+``V4L2_CID_DETECT_CLASS (class)``
+    The Detect class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_DETECT_MD_MODE (menu)``
+    Sets the motion detection mode.
+
+.. tabularcolumns:: |p{7.7cm}|p{9.8cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_DETECT_MD_MODE_DISABLED``
+      - Disable motion detection.
+    * - ``V4L2_DETECT_MD_MODE_GLOBAL``
+      - Use a single motion detection threshold.
+    * - ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID``
+      - The image is divided into a grid, each cell with its own motion
+	detection threshold. These thresholds are set through the
+	``V4L2_CID_DETECT_MD_THRESHOLD_GRID`` matrix control.
+    * - ``V4L2_DETECT_MD_MODE_REGION_GRID``
+      - The image is divided into a grid, each cell with its own region
+	value that specifies which per-region motion detection thresholds
+	should be used. Each region has its own thresholds. How these
+	per-region thresholds are set up is driver-specific. The region
+	values for the grid are set through the
+	``V4L2_CID_DETECT_MD_REGION_GRID`` matrix control.
+
+
+
+``V4L2_CID_DETECT_MD_GLOBAL_THRESHOLD (integer)``
+    Sets the global motion detection threshold to be used with the
+    ``V4L2_DETECT_MD_MODE_GLOBAL`` motion detection mode.
+
+``V4L2_CID_DETECT_MD_THRESHOLD_GRID (__u16 matrix)``
+    Sets the motion detection thresholds for each cell in the grid. To
+    be used with the ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID`` motion
+    detection mode. Matrix element (0, 0) represents the cell at the
+    top-left of the grid.
+
+``V4L2_CID_DETECT_MD_REGION_GRID (__u8 matrix)``
+    Sets the motion detection region value for each cell in the grid. To
+    be used with the ``V4L2_DETECT_MD_MODE_REGION_GRID`` motion
+    detection mode. Matrix element (0, 0) represents the cell at the
+    top-left of the grid.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst
new file mode 100644
index 000000000000..c572b65dc772
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst
@@ -0,0 +1,166 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _dv-controls:
+
+*******************************
+Digital Video Control Reference
+*******************************
+
+The Digital Video control class is intended to control receivers and
+transmitters for `VGA <http://en.wikipedia.org/wiki/Vga>`__,
+`DVI <http://en.wikipedia.org/wiki/Digital_Visual_Interface>`__
+(Digital Visual Interface), HDMI (:ref:`hdmi`) and DisplayPort
+(:ref:`dp`). These controls are generally expected to be private to
+the receiver or transmitter subdevice that implements them, so they are
+only exposed on the ``/dev/v4l-subdev*`` device node.
+
+.. note::
+
+   Note that these devices can have multiple input or output pads which are
+   hooked up to e.g. HDMI connectors. Even though the subdevice will
+   receive or transmit video from/to only one of those pads, the other pads
+   can still be active when it comes to EDID (Extended Display
+   Identification Data, :ref:`vesaedid`) and HDCP (High-bandwidth Digital
+   Content Protection System, :ref:`hdcp`) processing, allowing the
+   device to do the fairly slow EDID/HDCP handling in advance. This allows
+   for quick switching between connectors.
+
+These pads appear in several of the controls in this section as
+bitmasks, one bit for each pad. Bit 0 corresponds to pad 0, bit 1 to pad
+1, etc. The maximum value of the control is the set of valid pads.
+
+
+.. _dv-control-id:
+
+Digital Video Control IDs
+=========================
+
+``V4L2_CID_DV_CLASS (class)``
+    The Digital Video class descriptor.
+
+``V4L2_CID_DV_TX_HOTPLUG (bitmask)``
+    Many connectors have a hotplug pin which is high if EDID information
+    is available from the source. This control shows the state of the
+    hotplug pin as seen by the transmitter. Each bit corresponds to an
+    output pad on the transmitter. If an output pad does not have an
+    associated hotplug pin, then the bit for that pad will be 0. This
+    read-only control is applicable to DVI-D, HDMI and DisplayPort
+    connectors.
+
+``V4L2_CID_DV_TX_RXSENSE (bitmask)``
+    Rx Sense is the detection of pull-ups on the TMDS clock lines. This
+    normally means that the sink has left/entered standby (i.e. the
+    transmitter can sense that the receiver is ready to receive video).
+    Each bit corresponds to an output pad on the transmitter. If an
+    output pad does not have an associated Rx Sense, then the bit for
+    that pad will be 0. This read-only control is applicable to DVI-D
+    and HDMI devices.
+
+``V4L2_CID_DV_TX_EDID_PRESENT (bitmask)``
+    When the transmitter sees the hotplug signal from the receiver it
+    will attempt to read the EDID. If set, then the transmitter has read
+    at least the first block (= 128 bytes). Each bit corresponds to an
+    output pad on the transmitter. If an output pad does not support
+    EDIDs, then the bit for that pad will be 0. This read-only control
+    is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors.
+
+``V4L2_CID_DV_TX_MODE``
+    (enum)
+
+enum v4l2_dv_tx_mode -
+    HDMI transmitters can transmit in DVI-D mode (just video) or in HDMI
+    mode (video + audio + auxiliary data). This control selects which
+    mode to use: V4L2_DV_TX_MODE_DVI_D or V4L2_DV_TX_MODE_HDMI.
+    This control is applicable to HDMI connectors.
+
+``V4L2_CID_DV_TX_RGB_RANGE``
+    (enum)
+
+enum v4l2_dv_rgb_range -
+    Select the quantization range for RGB output. V4L2_DV_RANGE_AUTO
+    follows the RGB quantization range specified in the standard for the
+    video interface (ie. :ref:`cea861` for HDMI).
+    V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the
+    standard to be compatible with sinks that have not implemented the
+    standard correctly (unfortunately quite common for HDMI and DVI-D).
+    Full range allows all possible values to be used whereas limited
+    range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is
+    the number of bits per component. This control is applicable to VGA,
+    DVI-A/D, HDMI and DisplayPort connectors.
+
+``V4L2_CID_DV_TX_IT_CONTENT_TYPE``
+    (enum)
+
+enum v4l2_dv_it_content_type -
+    Configures the IT Content Type of the transmitted video. This
+    information is sent over HDMI and DisplayPort connectors as part of
+    the AVI InfoFrame. The term 'IT Content' is used for content that
+    originates from a computer as opposed to content from a TV broadcast
+    or an analog source. The enum v4l2_dv_it_content_type defines
+    the possible content types:
+
+.. tabularcolumns:: |p{7.3cm}|p{10.4cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_DV_IT_CONTENT_TYPE_GRAPHICS``
+      - Graphics content. Pixel data should be passed unfiltered and
+	without analog reconstruction.
+    * - ``V4L2_DV_IT_CONTENT_TYPE_PHOTO``
+      - Photo content. The content is derived from digital still pictures.
+	The content should be passed through with minimal scaling and
+	picture enhancements.
+    * - ``V4L2_DV_IT_CONTENT_TYPE_CINEMA``
+      - Cinema content.
+    * - ``V4L2_DV_IT_CONTENT_TYPE_GAME``
+      - Game content. Audio and video latency should be minimized.
+    * - ``V4L2_DV_IT_CONTENT_TYPE_NO_ITC``
+      - No IT Content information is available and the ITC bit in the AVI
+	InfoFrame is set to 0.
+
+
+
+``V4L2_CID_DV_RX_POWER_PRESENT (bitmask)``
+    Detects whether the receiver receives power from the source (e.g.
+    HDMI carries 5V on one of the pins). This is often used to power an
+    eeprom which contains EDID information, such that the source can
+    read the EDID even if the sink is in standby/power off. Each bit
+    corresponds to an input pad on the receiver. If an input pad
+    cannot detect whether power is present, then the bit for that pad
+    will be 0. This read-only control is applicable to DVI-D, HDMI and
+    DisplayPort connectors.
+
+``V4L2_CID_DV_RX_RGB_RANGE``
+    (enum)
+
+enum v4l2_dv_rgb_range -
+    Select the quantization range for RGB input. V4L2_DV_RANGE_AUTO
+    follows the RGB quantization range specified in the standard for the
+    video interface (ie. :ref:`cea861` for HDMI).
+    V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the
+    standard to be compatible with sources that have not implemented the
+    standard correctly (unfortunately quite common for HDMI and DVI-D).
+    Full range allows all possible values to be used whereas limited
+    range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is
+    the number of bits per component. This control is applicable to VGA,
+    DVI-A/D, HDMI and DisplayPort connectors.
+
+``V4L2_CID_DV_RX_IT_CONTENT_TYPE``
+    (enum)
+
+enum v4l2_dv_it_content_type -
+    Reads the IT Content Type of the received video. This information is
+    sent over HDMI and DisplayPort connectors as part of the AVI
+    InfoFrame. The term 'IT Content' is used for content that originates
+    from a computer as opposed to content from a TV broadcast or an
+    analog source. See ``V4L2_CID_DV_TX_IT_CONTENT_TYPE`` for the
+    available content types.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst
new file mode 100644
index 000000000000..5053a380f7de
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst
@@ -0,0 +1,192 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _flash-controls:
+
+***********************
+Flash Control Reference
+***********************
+
+The V4L2 flash controls are intended to provide generic access to flash
+controller devices. Flash controller devices are typically used in
+digital cameras.
+
+The interface can support both LED and xenon flash devices. As of
+writing this, there is no xenon flash driver using this interface.
+
+
+.. _flash-controls-use-cases:
+
+Supported use cases
+===================
+
+
+Unsynchronised LED flash (software strobe)
+------------------------------------------
+
+Unsynchronised LED flash is controlled directly by the host as the
+sensor. The flash must be enabled by the host before the exposure of the
+image starts and disabled once it ends. The host is fully responsible
+for the timing of the flash.
+
+Example of such device: Nokia N900.
+
+
+Synchronised LED flash (hardware strobe)
+----------------------------------------
+
+The synchronised LED flash is pre-programmed by the host (power and
+timeout) but controlled by the sensor through a strobe signal from the
+sensor to the flash.
+
+The sensor controls the flash duration and timing. This information
+typically must be made available to the sensor.
+
+
+LED flash as torch
+------------------
+
+LED flash may be used as torch in conjunction with another use case
+involving camera or individually.
+
+
+.. _flash-control-id:
+
+Flash Control IDs
+-----------------
+
+``V4L2_CID_FLASH_CLASS (class)``
+    The FLASH class descriptor.
+
+``V4L2_CID_FLASH_LED_MODE (menu)``
+    Defines the mode of the flash LED, the high-power white LED attached
+    to the flash controller. Setting this control may not be possible in
+    presence of some faults. See V4L2_CID_FLASH_FAULT.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_FLASH_LED_MODE_NONE``
+      - Off.
+    * - ``V4L2_FLASH_LED_MODE_FLASH``
+      - Flash mode.
+    * - ``V4L2_FLASH_LED_MODE_TORCH``
+      - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.
+
+
+
+``V4L2_CID_FLASH_STROBE_SOURCE (menu)``
+    Defines the source of the flash LED strobe.
+
+.. tabularcolumns:: |p{7.5cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_FLASH_STROBE_SOURCE_SOFTWARE``
+      - The flash strobe is triggered by using the
+	V4L2_CID_FLASH_STROBE control.
+    * - ``V4L2_FLASH_STROBE_SOURCE_EXTERNAL``
+      - The flash strobe is triggered by an external source. Typically
+	this is a sensor, which makes it possible to synchronise the
+	flash strobe start to exposure start.
+
+
+
+``V4L2_CID_FLASH_STROBE (button)``
+    Strobe flash. Valid when V4L2_CID_FLASH_LED_MODE is set to
+    V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE
+    is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this
+    control may not be possible in presence of some faults. See
+    V4L2_CID_FLASH_FAULT.
+
+``V4L2_CID_FLASH_STROBE_STOP (button)``
+    Stop flash strobe immediately.
+
+``V4L2_CID_FLASH_STROBE_STATUS (boolean)``
+    Strobe status: whether the flash is strobing at the moment or not.
+    This is a read-only control.
+
+``V4L2_CID_FLASH_TIMEOUT (integer)``
+    Hardware timeout for flash. The flash strobe is stopped after this
+    period of time has passed from the start of the strobe.
+
+``V4L2_CID_FLASH_INTENSITY (integer)``
+    Intensity of the flash strobe when the flash LED is in flash mode
+    (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps (mA)
+    if possible.
+
+``V4L2_CID_FLASH_TORCH_INTENSITY (integer)``
+    Intensity of the flash LED in torch mode
+    (V4L2_FLASH_LED_MODE_TORCH). The unit should be milliamps (mA)
+    if possible. Setting this control may not be possible in presence of
+    some faults. See V4L2_CID_FLASH_FAULT.
+
+``V4L2_CID_FLASH_INDICATOR_INTENSITY (integer)``
+    Intensity of the indicator LED. The indicator LED may be fully
+    independent of the flash LED. The unit should be microamps (uA) if
+    possible.
+
+``V4L2_CID_FLASH_FAULT (bitmask)``
+    Faults related to the flash. The faults tell about specific problems
+    in the flash chip itself or the LEDs attached to it. Faults may
+    prevent further use of some of the flash controls. In particular,
+    V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE
+    if the fault affects the flash LED. Exactly which faults have such
+    an effect is chip dependent. Reading the faults resets the control
+    and returns the chip to a usable state if possible.
+
+.. tabularcolumns:: |p{8.4cm}|p{9.1cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_FLASH_FAULT_OVER_VOLTAGE``
+      - Flash controller voltage to the flash LED has exceeded the limit
+	specific to the flash controller.
+    * - ``V4L2_FLASH_FAULT_TIMEOUT``
+      - The flash strobe was still on when the timeout set by the user ---
+	V4L2_CID_FLASH_TIMEOUT control --- has expired. Not all flash
+	controllers may set this in all such conditions.
+    * - ``V4L2_FLASH_FAULT_OVER_TEMPERATURE``
+      - The flash controller has overheated.
+    * - ``V4L2_FLASH_FAULT_SHORT_CIRCUIT``
+      - The short circuit protection of the flash controller has been
+	triggered.
+    * - ``V4L2_FLASH_FAULT_OVER_CURRENT``
+      - Current in the LED power supply has exceeded the limit specific to
+	the flash controller.
+    * - ``V4L2_FLASH_FAULT_INDICATOR``
+      - The flash controller has detected a short or open circuit
+	condition on the indicator LED.
+    * - ``V4L2_FLASH_FAULT_UNDER_VOLTAGE``
+      - Flash controller voltage to the flash LED has been below the
+	minimum limit specific to the flash controller.
+    * - ``V4L2_FLASH_FAULT_INPUT_VOLTAGE``
+      - The input voltage of the flash controller is below the limit under
+	which strobing the flash at full current will not be possible.The
+	condition persists until this flag is no longer set.
+    * - ``V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE``
+      - The temperature of the LED has exceeded its allowed upper limit.
+
+
+
+``V4L2_CID_FLASH_CHARGE (boolean)``
+    Enable or disable charging of the xenon flash capacitor.
+
+``V4L2_CID_FLASH_READY (boolean)``
+    Is the flash ready to strobe? Xenon flashes require their capacitors
+    charged before strobing. LED flashes often require a cooldown period
+    after strobe during which another strobe will not be possible. This
+    is a read-only control.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst
new file mode 100644
index 000000000000..69197bbe23dd
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst
@@ -0,0 +1,95 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _fm-rx-controls:
+
+*****************************
+FM Receiver Control Reference
+*****************************
+
+The FM Receiver (FM_RX) class includes controls for common features of
+FM Reception capable devices.
+
+
+.. _fm-rx-control-id:
+
+FM_RX Control IDs
+=================
+
+``V4L2_CID_FM_RX_CLASS (class)``
+    The FM_RX class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_RDS_RECEPTION (boolean)``
+    Enables/disables RDS reception by the radio tuner
+
+``V4L2_CID_RDS_RX_PTY (integer)``
+    Gets RDS Programme Type field. This encodes up to 31 pre-defined
+    programme types.
+
+``V4L2_CID_RDS_RX_PS_NAME (string)``
+    Gets the Programme Service name (PS_NAME). It is intended for
+    static display on a receiver. It is the primary aid to listeners in
+    programme service identification and selection. In Annex E of
+    :ref:`iec62106`, the RDS specification, there is a full
+    description of the correct character encoding for Programme Service
+    name strings. Also from RDS specification, PS is usually a single
+    eight character text. However, it is also possible to find receivers
+    which can scroll strings sized as 8 x N characters. So, this control
+    must be configured with steps of 8 characters. The result is it must
+    always contain a string with size multiple of 8.
+
+``V4L2_CID_RDS_RX_RADIO_TEXT (string)``
+    Gets the Radio Text info. It is a textual description of what is
+    being broadcasted. RDS Radio Text can be applied when broadcaster
+    wishes to transmit longer PS names, programme-related information or
+    any other text. In these cases, RadioText can be used in addition to
+    ``V4L2_CID_RDS_RX_PS_NAME``. The encoding for Radio Text strings is
+    also fully described in Annex E of :ref:`iec62106`. The length of
+    Radio Text strings depends on which RDS Block is being used to
+    transmit it, either 32 (2A block) or 64 (2B block). However, it is
+    also possible to find receivers which can scroll strings sized as 32
+    x N or 64 x N characters. So, this control must be configured with
+    steps of 32 or 64 characters. The result is it must always contain a
+    string with size multiple of 32 or 64.
+
+``V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT (boolean)``
+    If set, then a traffic announcement is in progress.
+
+``V4L2_CID_RDS_RX_TRAFFIC_PROGRAM (boolean)``
+    If set, then the tuned programme carries traffic announcements.
+
+``V4L2_CID_RDS_RX_MUSIC_SPEECH (boolean)``
+    If set, then this channel broadcasts music. If cleared, then it
+    broadcasts speech. If the transmitter doesn't make this distinction,
+    then it will be set.
+
+``V4L2_CID_TUNE_DEEMPHASIS``
+    (enum)
+
+enum v4l2_deemphasis -
+    Configures the de-emphasis value for reception. A de-emphasis filter
+    is applied to the broadcast to accentuate the high audio
+    frequencies. Depending on the region, a time constant of either 50
+    or 75 useconds is used. The enum v4l2_deemphasis defines possible
+    values for de-emphasis. Here they are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_DEEMPHASIS_DISABLED``
+      - No de-emphasis is applied.
+    * - ``V4L2_DEEMPHASIS_50_uS``
+      - A de-emphasis of 50 uS is used.
+    * - ``V4L2_DEEMPHASIS_75_uS``
+      - A de-emphasis of 75 uS is used.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst
new file mode 100644
index 000000000000..c13ec0a6af3a
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst
@@ -0,0 +1,188 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _fm-tx-controls:
+
+********************************
+FM Transmitter Control Reference
+********************************
+
+The FM Transmitter (FM_TX) class includes controls for common features
+of FM transmissions capable devices. Currently this class includes
+parameters for audio compression, pilot tone generation, audio deviation
+limiter, RDS transmission and tuning power features.
+
+
+.. _fm-tx-control-id:
+
+FM_TX Control IDs
+=================
+
+``V4L2_CID_FM_TX_CLASS (class)``
+    The FM_TX class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_RDS_TX_DEVIATION (integer)``
+    Configures RDS signal frequency deviation level in Hz. The range and
+    step are driver-specific.
+
+``V4L2_CID_RDS_TX_PI (integer)``
+    Sets the RDS Programme Identification field for transmission.
+
+``V4L2_CID_RDS_TX_PTY (integer)``
+    Sets the RDS Programme Type field for transmission. This encodes up
+    to 31 pre-defined programme types.
+
+``V4L2_CID_RDS_TX_PS_NAME (string)``
+    Sets the Programme Service name (PS_NAME) for transmission. It is
+    intended for static display on a receiver. It is the primary aid to
+    listeners in programme service identification and selection. In
+    Annex E of :ref:`iec62106`, the RDS specification, there is a full
+    description of the correct character encoding for Programme Service
+    name strings. Also from RDS specification, PS is usually a single
+    eight character text. However, it is also possible to find receivers
+    which can scroll strings sized as 8 x N characters. So, this control
+    must be configured with steps of 8 characters. The result is it must
+    always contain a string with size multiple of 8.
+
+``V4L2_CID_RDS_TX_RADIO_TEXT (string)``
+    Sets the Radio Text info for transmission. It is a textual
+    description of what is being broadcasted. RDS Radio Text can be
+    applied when broadcaster wishes to transmit longer PS names,
+    programme-related information or any other text. In these cases,
+    RadioText should be used in addition to ``V4L2_CID_RDS_TX_PS_NAME``.
+    The encoding for Radio Text strings is also fully described in Annex
+    E of :ref:`iec62106`. The length of Radio Text strings depends on
+    which RDS Block is being used to transmit it, either 32 (2A block)
+    or 64 (2B block). However, it is also possible to find receivers
+    which can scroll strings sized as 32 x N or 64 x N characters. So,
+    this control must be configured with steps of 32 or 64 characters.
+    The result is it must always contain a string with size multiple of
+    32 or 64.
+
+``V4L2_CID_RDS_TX_MONO_STEREO (boolean)``
+    Sets the Mono/Stereo bit of the Decoder Identification code. If set,
+    then the audio was recorded as stereo.
+
+``V4L2_CID_RDS_TX_ARTIFICIAL_HEAD (boolean)``
+    Sets the
+    `Artificial Head <http://en.wikipedia.org/wiki/Artificial_head>`__
+    bit of the Decoder Identification code. If set, then the audio was
+    recorded using an artificial head.
+
+``V4L2_CID_RDS_TX_COMPRESSED (boolean)``
+    Sets the Compressed bit of the Decoder Identification code. If set,
+    then the audio is compressed.
+
+``V4L2_CID_RDS_TX_DYNAMIC_PTY (boolean)``
+    Sets the Dynamic PTY bit of the Decoder Identification code. If set,
+    then the PTY code is dynamically switched.
+
+``V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT (boolean)``
+    If set, then a traffic announcement is in progress.
+
+``V4L2_CID_RDS_TX_TRAFFIC_PROGRAM (boolean)``
+    If set, then the tuned programme carries traffic announcements.
+
+``V4L2_CID_RDS_TX_MUSIC_SPEECH (boolean)``
+    If set, then this channel broadcasts music. If cleared, then it
+    broadcasts speech. If the transmitter doesn't make this distinction,
+    then it should be set.
+
+``V4L2_CID_RDS_TX_ALT_FREQS_ENABLE (boolean)``
+    If set, then transmit alternate frequencies.
+
+``V4L2_CID_RDS_TX_ALT_FREQS (__u32 array)``
+    The alternate frequencies in kHz units. The RDS standard allows for
+    up to 25 frequencies to be defined. Drivers may support fewer
+    frequencies so check the array size.
+
+``V4L2_CID_AUDIO_LIMITER_ENABLED (boolean)``
+    Enables or disables the audio deviation limiter feature. The limiter
+    is useful when trying to maximize the audio volume, minimize
+    receiver-generated distortion and prevent overmodulation.
+
+``V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (integer)``
+    Sets the audio deviation limiter feature release time. Unit is in
+    useconds. Step and range are driver-specific.
+
+``V4L2_CID_AUDIO_LIMITER_DEVIATION (integer)``
+    Configures audio frequency deviation level in Hz. The range and step
+    are driver-specific.
+
+``V4L2_CID_AUDIO_COMPRESSION_ENABLED (boolean)``
+    Enables or disables the audio compression feature. This feature
+    amplifies signals below the threshold by a fixed gain and compresses
+    audio signals above the threshold by the ratio of Threshold/(Gain +
+    Threshold).
+
+``V4L2_CID_AUDIO_COMPRESSION_GAIN (integer)``
+    Sets the gain for audio compression feature. It is a dB value. The
+    range and step are driver-specific.
+
+``V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (integer)``
+    Sets the threshold level for audio compression freature. It is a dB
+    value. The range and step are driver-specific.
+
+``V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (integer)``
+    Sets the attack time for audio compression feature. It is a useconds
+    value. The range and step are driver-specific.
+
+``V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (integer)``
+    Sets the release time for audio compression feature. It is a
+    useconds value. The range and step are driver-specific.
+
+``V4L2_CID_PILOT_TONE_ENABLED (boolean)``
+    Enables or disables the pilot tone generation feature.
+
+``V4L2_CID_PILOT_TONE_DEVIATION (integer)``
+    Configures pilot tone frequency deviation level. Unit is in Hz. The
+    range and step are driver-specific.
+
+``V4L2_CID_PILOT_TONE_FREQUENCY (integer)``
+    Configures pilot tone frequency value. Unit is in Hz. The range and
+    step are driver-specific.
+
+``V4L2_CID_TUNE_PREEMPHASIS``
+    (enum)
+
+enum v4l2_preemphasis -
+    Configures the pre-emphasis value for broadcasting. A pre-emphasis
+    filter is applied to the broadcast to accentuate the high audio
+    frequencies. Depending on the region, a time constant of either 50
+    or 75 useconds is used. The enum v4l2_preemphasis defines possible
+    values for pre-emphasis. Here they are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_PREEMPHASIS_DISABLED``
+      - No pre-emphasis is applied.
+    * - ``V4L2_PREEMPHASIS_50_uS``
+      - A pre-emphasis of 50 uS is used.
+    * - ``V4L2_PREEMPHASIS_75_uS``
+      - A pre-emphasis of 75 uS is used.
+
+
+
+``V4L2_CID_TUNE_POWER_LEVEL (integer)``
+    Sets the output power level for signal transmission. Unit is in
+    dBuV. Range and step are driver-specific.
+
+``V4L2_CID_TUNE_ANTENNA_CAPACITOR (integer)``
+    This selects the value of antenna tuning capacitor manually or
+    automatically if set to zero. Unit, range and step are
+    driver-specific.
+
+For more details about RDS specification, refer to :ref:`iec62106`
+document, from CENELEC.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
new file mode 100644
index 000000000000..bb9d484c25e4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
@@ -0,0 +1,63 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _image-process-controls:
+
+*******************************
+Image Process Control Reference
+*******************************
+
+The Image Process control class is intended for low-level control of
+image processing functions. Unlike ``V4L2_CID_IMAGE_SOURCE_CLASS``, the
+controls in this class affect processing the image, and do not control
+capturing of it.
+
+
+.. _image-process-control-id:
+
+Image Process Control IDs
+=========================
+
+``V4L2_CID_IMAGE_PROC_CLASS (class)``
+    The IMAGE_PROC class descriptor.
+
+``V4L2_CID_LINK_FREQ (integer menu)``
+    Data bus frequency. Together with the media bus pixel code, bus type
+    (clock cycles per sample), the data bus frequency defines the pixel
+    rate (``V4L2_CID_PIXEL_RATE``) in the pixel array (or possibly
+    elsewhere, if the device is not an image sensor). The frame rate can
+    be calculated from the pixel clock, image width and height and
+    horizontal and vertical blanking. While the pixel rate control may
+    be defined elsewhere than in the subdev containing the pixel array,
+    the frame rate cannot be obtained from that information. This is
+    because only on the pixel array it can be assumed that the vertical
+    and horizontal blanking information is exact: no other blanking is
+    allowed in the pixel array. The selection of frame rate is performed
+    by selecting the desired horizontal and vertical blanking. The unit
+    of this control is Hz.
+
+``V4L2_CID_PIXEL_RATE (64-bit integer)``
+    Pixel rate in the source pads of the subdev. This control is
+    read-only and its unit is pixels / second.
+
+``V4L2_CID_TEST_PATTERN (menu)``
+    Some capture/display/sensor devices have the capability to generate
+    test pattern images. These hardware specific test patterns can be
+    used to test if a device is working properly.
+
+``V4L2_CID_DEINTERLACING_MODE (menu)``
+    The video deinterlacing mode (such as Bob, Weave, ...). The menu items are
+    driver specific and are documented in :ref:`uapi-v4l-drivers`.
+
+``V4L2_CID_DIGITAL_GAIN (integer)``
+    Digital gain is the value by which all colour components
+    are multiplied by. Typically the digital gain applied is the
+    control value divided by e.g. 0x100, meaning that to get no
+    digital gain the control value needs to be 0x100. The no-gain
+    configuration is also typically the default.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst
new file mode 100644
index 000000000000..7b75158aca4d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst
@@ -0,0 +1,67 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _image-source-controls:
+
+******************************
+Image Source Control Reference
+******************************
+
+The Image Source control class is intended for low-level control of
+image source devices such as image sensors. The devices feature an
+analogue to digital converter and a bus transmitter to transmit the
+image data out of the device.
+
+
+.. _image-source-control-id:
+
+Image Source Control IDs
+========================
+
+``V4L2_CID_IMAGE_SOURCE_CLASS (class)``
+    The IMAGE_SOURCE class descriptor.
+
+``V4L2_CID_VBLANK (integer)``
+    Vertical blanking. The idle period after every frame during which no
+    image data is produced. The unit of vertical blanking is a line.
+    Every line has length of the image width plus horizontal blanking at
+    the pixel rate defined by ``V4L2_CID_PIXEL_RATE`` control in the
+    same sub-device.
+
+``V4L2_CID_HBLANK (integer)``
+    Horizontal blanking. The idle period after every line of image data
+    during which no image data is produced. The unit of horizontal
+    blanking is pixels.
+
+``V4L2_CID_ANALOGUE_GAIN (integer)``
+    Analogue gain is gain affecting all colour components in the pixel
+    matrix. The gain operation is performed in the analogue domain
+    before A/D conversion.
+
+``V4L2_CID_TEST_PATTERN_RED (integer)``
+    Test pattern red colour component.
+
+``V4L2_CID_TEST_PATTERN_GREENR (integer)``
+    Test pattern green (next to red) colour component.
+
+``V4L2_CID_TEST_PATTERN_BLUE (integer)``
+    Test pattern blue colour component.
+
+``V4L2_CID_TEST_PATTERN_GREENB (integer)``
+    Test pattern green (next to blue) colour component.
+
+``V4L2_CID_UNIT_CELL_SIZE (struct)``
+    This control returns the unit cell size in nanometers. The struct
+    :c:type:`v4l2_area` provides the width and the height in separate
+    fields to take into consideration asymmetric pixels.
+    This control does not take into consideration any possible hardware
+    binning.
+    The unit cell consists of the whole area of the pixel, sensitive and
+    non-sensitive.
+    This control is required for automatic calibration of sensors/cameras.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst
new file mode 100644
index 000000000000..5ea69978f3ea
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst
@@ -0,0 +1,113 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _jpeg-controls:
+
+**********************
+JPEG Control Reference
+**********************
+
+The JPEG class includes controls for common features of JPEG encoders
+and decoders. Currently it includes features for codecs implementing
+progressive baseline DCT compression process with Huffman entrophy
+coding.
+
+
+.. _jpeg-control-id:
+
+JPEG Control IDs
+================
+
+``V4L2_CID_JPEG_CLASS (class)``
+    The JPEG class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_JPEG_CHROMA_SUBSAMPLING (menu)``
+    The chroma subsampling factors describe how each component of an
+    input image is sampled, in respect to maximum sample rate in each
+    spatial dimension. See :ref:`itu-t81`, clause A.1.1. for more
+    details. The ``V4L2_CID_JPEG_CHROMA_SUBSAMPLING`` control determines
+    how Cb and Cr components are downsampled after converting an input
+    image from RGB to Y'CbCr color space.
+
+.. tabularcolumns:: |p{7.5cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_444``
+      - No chroma subsampling, each pixel has Y, Cr and Cb values.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_422``
+      - Horizontally subsample Cr, Cb components by a factor of 2.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_420``
+      - Subsample Cr, Cb components horizontally and vertically by 2.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_411``
+      - Horizontally subsample Cr, Cb components by a factor of 4.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_410``
+      - Subsample Cr, Cb components horizontally by 4 and vertically by 2.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY``
+      - Use only luminance component.
+
+
+
+``V4L2_CID_JPEG_RESTART_INTERVAL (integer)``
+    The restart interval determines an interval of inserting RSTm
+    markers (m = 0..7). The purpose of these markers is to additionally
+    reinitialize the encoder process, in order to process blocks of an
+    image independently. For the lossy compression processes the restart
+    interval unit is MCU (Minimum Coded Unit) and its value is contained
+    in DRI (Define Restart Interval) marker. If
+    ``V4L2_CID_JPEG_RESTART_INTERVAL`` control is set to 0, DRI and RSTm
+    markers will not be inserted.
+
+.. _jpeg-quality-control:
+
+``V4L2_CID_JPEG_COMPRESSION_QUALITY (integer)``
+    ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control determines trade-off
+    between image quality and size. It provides simpler method for
+    applications to control image quality, without a need for direct
+    reconfiguration of luminance and chrominance quantization tables. In
+    cases where a driver uses quantization tables configured directly by
+    an application, using interfaces defined elsewhere,
+    ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control should be set by
+    driver to 0.
+
+    The value range of this control is driver-specific. Only positive,
+    non-zero values are meaningful. The recommended range is 1 - 100,
+    where larger values correspond to better image quality.
+
+.. _jpeg-active-marker-control:
+
+``V4L2_CID_JPEG_ACTIVE_MARKER (bitmask)``
+    Specify which JPEG markers are included in compressed stream. This
+    control is valid only for encoders.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_JPEG_ACTIVE_MARKER_APP0``
+      - Application data segment APP\ :sub:`0`.
+    * - ``V4L2_JPEG_ACTIVE_MARKER_APP1``
+      - Application data segment APP\ :sub:`1`.
+    * - ``V4L2_JPEG_ACTIVE_MARKER_COM``
+      - Comment segment.
+    * - ``V4L2_JPEG_ACTIVE_MARKER_DQT``
+      - Quantization tables segment.
+    * - ``V4L2_JPEG_ACTIVE_MARKER_DHT``
+      - Huffman tables segment.
+
+
+
+For more details about JPEG specification, refer to :ref:`itu-t81`,
+:ref:`jfif`, :ref:`w3c-jpeg-jfif`.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst
new file mode 100644
index 000000000000..5277138fce67
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst
@@ -0,0 +1,96 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _rf-tuner-controls:
+
+**************************
+RF Tuner Control Reference
+**************************
+
+The RF Tuner (RF_TUNER) class includes controls for common features of
+devices having RF tuner.
+
+In this context, RF tuner is radio receiver circuit between antenna and
+demodulator. It receives radio frequency (RF) from the antenna and
+converts that received signal to lower intermediate frequency (IF) or
+baseband frequency (BB). Tuners that could do baseband output are often
+called Zero-IF tuners. Older tuners were typically simple PLL tuners
+inside a metal box, while newer ones are highly integrated chips
+without a metal box "silicon tuners". These controls are mostly
+applicable for new feature rich silicon tuners, just because older
+tuners does not have much adjustable features.
+
+For more information about RF tuners see
+`Tuner (radio) <http://en.wikipedia.org/wiki/Tuner_%28radio%29>`__
+and `RF front end <http://en.wikipedia.org/wiki/RF_front_end>`__
+from Wikipedia.
+
+
+.. _rf-tuner-control-id:
+
+RF_TUNER Control IDs
+====================
+
+``V4L2_CID_RF_TUNER_CLASS (class)``
+    The RF_TUNER class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_RF_TUNER_BANDWIDTH_AUTO (boolean)``
+    Enables/disables tuner radio channel bandwidth configuration. In
+    automatic mode bandwidth configuration is performed by the driver.
+
+``V4L2_CID_RF_TUNER_BANDWIDTH (integer)``
+    Filter(s) on tuner signal path are used to filter signal according
+    to receiving party needs. Driver configures filters to fulfill
+    desired bandwidth requirement. Used when
+    V4L2_CID_RF_TUNER_BANDWIDTH_AUTO is not set. Unit is in Hz. The
+    range and step are driver-specific.
+
+``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO (boolean)``
+    Enables/disables LNA automatic gain control (AGC)
+
+``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO (boolean)``
+    Enables/disables mixer automatic gain control (AGC)
+
+``V4L2_CID_RF_TUNER_IF_GAIN_AUTO (boolean)``
+    Enables/disables IF automatic gain control (AGC)
+
+``V4L2_CID_RF_TUNER_RF_GAIN (integer)``
+    The RF amplifier is the very first amplifier on the receiver signal
+    path, just right after the antenna input. The difference between the
+    LNA gain and the RF gain in this document is that the LNA gain is
+    integrated in the tuner chip while the RF gain is a separate chip.
+    There may be both RF and LNA gain controls in the same device. The
+    range and step are driver-specific.
+
+``V4L2_CID_RF_TUNER_LNA_GAIN (integer)``
+    LNA (low noise amplifier) gain is first gain stage on the RF tuner
+    signal path. It is located very close to tuner antenna input. Used
+    when ``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO`` is not set. See
+    ``V4L2_CID_RF_TUNER_RF_GAIN`` to understand how RF gain and LNA gain
+    differs from the each others. The range and step are
+    driver-specific.
+
+``V4L2_CID_RF_TUNER_MIXER_GAIN (integer)``
+    Mixer gain is second gain stage on the RF tuner signal path. It is
+    located inside mixer block, where RF signal is down-converted by the
+    mixer. Used when ``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO`` is not set.
+    The range and step are driver-specific.
+
+``V4L2_CID_RF_TUNER_IF_GAIN (integer)``
+    IF gain is last gain stage on the RF tuner signal path. It is
+    located on output of RF tuner. It controls signal level of
+    intermediate frequency output or baseband output. Used when
+    ``V4L2_CID_RF_TUNER_IF_GAIN_AUTO`` is not set. The range and step
+    are driver-specific.
+
+``V4L2_CID_RF_TUNER_PLL_LOCK (boolean)``
+    Is synthesizer PLL locked? RF tuner is receiving given frequency
+    when that control is set. This is a read-only control.
diff --git a/Documentation/userspace-api/media/v4l/extended-controls.rst b/Documentation/userspace-api/media/v4l/extended-controls.rst
new file mode 100644
index 000000000000..9aa352ac5ea4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/extended-controls.rst
@@ -0,0 +1,180 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _extended-controls:
+
+*********************
+Extended Controls API
+*********************
+
+
+Introduction
+============
+
+The control mechanism as originally designed was meant to be used for
+user settings (brightness, saturation, etc). However, it turned out to
+be a very useful model for implementing more complicated driver APIs
+where each driver implements only a subset of a larger API.
+
+The MPEG encoding API was the driving force behind designing and
+implementing this extended control mechanism: the MPEG standard is quite
+large and the currently supported hardware MPEG encoders each only
+implement a subset of this standard. Further more, many parameters
+relating to how the video is encoded into an MPEG stream are specific to
+the MPEG encoding chip since the MPEG standard only defines the format
+of the resulting MPEG stream, not how the video is actually encoded into
+that format.
+
+Unfortunately, the original control API lacked some features needed for
+these new uses and so it was extended into the (not terribly originally
+named) extended control API.
+
+Even though the MPEG encoding API was the first effort to use the
+Extended Control API, nowadays there are also other classes of Extended
+Controls, such as Camera Controls and FM Transmitter Controls. The
+Extended Controls API as well as all Extended Controls classes are
+described in the following text.
+
+
+The Extended Control API
+========================
+
+Three new ioctls are available:
+:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
+:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and
+:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`. These ioctls act
+on arrays of controls (as opposed to the
+:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
+:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls that act on a single
+control). This is needed since it is often required to atomically change
+several controls at once.
+
+Each of the new ioctls expects a pointer to a struct
+:c:type:`v4l2_ext_controls`. This structure
+contains a pointer to the control array, a count of the number of
+controls in that array and a control class. Control classes are used to
+group similar controls into a single class. For example, control class
+``V4L2_CTRL_CLASS_USER`` contains all user controls (i. e. all controls
+that can also be set using the old :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>`
+ioctl). Control class ``V4L2_CTRL_CLASS_MPEG`` contains all controls
+relating to MPEG encoding, etc.
+
+All controls in the control array must belong to the specified control
+class. An error is returned if this is not the case.
+
+It is also possible to use an empty control array (``count`` == 0) to check
+whether the specified control class is supported.
+
+The control array is a struct
+:c:type:`v4l2_ext_control` array. The
+struct :c:type:`v4l2_ext_control` is very similar to
+struct :c:type:`v4l2_control`, except for the fact that
+it also allows for 64-bit values and pointers to be passed.
+
+Since the struct :c:type:`v4l2_ext_control` supports
+pointers it is now also possible to have controls with compound types
+such as N-dimensional arrays and/or structures. You need to specify the
+``V4L2_CTRL_FLAG_NEXT_COMPOUND`` when enumerating controls to actually
+be able to see such compound controls. In other words, these controls
+with compound types should only be used programmatically.
+
+Since such compound controls need to expose more information about
+themselves than is possible with :ref:`VIDIOC_QUERYCTRL <VIDIOC_QUERYCTRL>`
+the :ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>` ioctl was added. In
+particular, this ioctl gives the dimensions of the N-dimensional array if
+this control consists of more than one element.
+
+.. note::
+
+   #. It is important to realize that due to the flexibility of controls it is
+      necessary to check whether the control you want to set actually is
+      supported in the driver and what the valid range of values is. So use
+      :ref:`VIDIOC_QUERYCTRL` to check this.
+
+   #. It is possible that some of the menu indices in a control of
+      type ``V4L2_CTRL_TYPE_MENU`` may not be supported (``VIDIOC_QUERYMENU``
+      will return an error). A good example is the list of supported MPEG
+      audio bitrates. Some drivers only support one or two bitrates, others
+      support a wider range.
+
+All controls use machine endianness.
+
+
+Enumerating Extended Controls
+=============================
+
+The recommended way to enumerate over the extended controls is by using
+:ref:`VIDIOC_QUERYCTRL` in combination with the
+``V4L2_CTRL_FLAG_NEXT_CTRL`` flag:
+
+
+.. code-block:: c
+
+    struct v4l2_queryctrl qctrl;
+
+    qctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL;
+    while (0 == ioctl (fd, VIDIOC_QUERYCTRL, &qctrl)) {
+	/* ... */
+	qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
+    }
+
+The initial control ID is set to 0 ORed with the
+``V4L2_CTRL_FLAG_NEXT_CTRL`` flag. The ``VIDIOC_QUERYCTRL`` ioctl will
+return the first control with a higher ID than the specified one. When
+no such controls are found an error is returned.
+
+If you want to get all controls within a specific control class, then
+you can set the initial ``qctrl.id`` value to the control class and add
+an extra check to break out of the loop when a control of another
+control class is found:
+
+
+.. code-block:: c
+
+    qctrl.id = V4L2_CTRL_CLASS_MPEG | V4L2_CTRL_FLAG_NEXT_CTRL;
+    while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &qctrl)) {
+	if (V4L2_CTRL_ID2CLASS(qctrl.id) != V4L2_CTRL_CLASS_MPEG)
+	    break;
+	/* ... */
+	qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
+    }
+
+The 32-bit ``qctrl.id`` value is subdivided into three bit ranges: the
+top 4 bits are reserved for flags (e. g. ``V4L2_CTRL_FLAG_NEXT_CTRL``)
+and are not actually part of the ID. The remaining 28 bits form the
+control ID, of which the most significant 12 bits define the control
+class and the least significant 16 bits identify the control within the
+control class. It is guaranteed that these last 16 bits are always
+non-zero for controls. The range of 0x1000 and up are reserved for
+driver-specific controls. The macro ``V4L2_CTRL_ID2CLASS(id)`` returns
+the control class ID based on a control ID.
+
+If the driver does not support extended controls, then
+``VIDIOC_QUERYCTRL`` will fail when used in combination with
+``V4L2_CTRL_FLAG_NEXT_CTRL``. In that case the old method of enumerating
+control should be used (see :ref:`enum_all_controls`). But if it is
+supported, then it is guaranteed to enumerate over all controls,
+including driver-private controls.
+
+
+Creating Control Panels
+=======================
+
+It is possible to create control panels for a graphical user interface
+where the user can select the various controls. Basically you will have
+to iterate over all controls using the method described above. Each
+control class starts with a control of type
+``V4L2_CTRL_TYPE_CTRL_CLASS``. ``VIDIOC_QUERYCTRL`` will return the name
+of this control class which can be used as the title of a tab page
+within a control panel.
+
+The flags field of struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` also
+contains hints on the behavior of the control. See the
+:ref:`VIDIOC_QUERYCTRL` documentation for more
+details.
diff --git a/Documentation/userspace-api/media/v4l/field-order.rst b/Documentation/userspace-api/media/v4l/field-order.rst
new file mode 100644
index 000000000000..04e9a6932dc5
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/field-order.rst
@@ -0,0 +1,172 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _field-order:
+
+***********
+Field Order
+***********
+
+We have to distinguish between progressive and interlaced video.
+Progressive video transmits all lines of a video image sequentially.
+Interlaced video divides an image into two fields, containing only the
+odd and even lines of the image, respectively. Alternating the so called
+odd and even field are transmitted, and due to a small delay between
+fields a cathode ray TV displays the lines interleaved, yielding the
+original frame. This curious technique was invented because at refresh
+rates similar to film the image would fade out too quickly. Transmitting
+fields reduces the flicker without the necessity of doubling the frame
+rate and with it the bandwidth required for each channel.
+
+It is important to understand a video camera does not expose one frame
+at a time, merely transmitting the frames separated into fields. The
+fields are in fact captured at two different instances in time. An
+object on screen may well move between one field and the next. For
+applications analysing motion it is of paramount importance to recognize
+which field of a frame is older, the *temporal order*.
+
+When the driver provides or accepts images field by field rather than
+interleaved, it is also important applications understand how the fields
+combine to frames. We distinguish between top (aka odd) and bottom (aka
+even) fields, the *spatial order*: The first line of the top field is
+the first line of an interlaced frame, the first line of the bottom
+field is the second line of that frame.
+
+However because fields were captured one after the other, arguing
+whether a frame commences with the top or bottom field is pointless. Any
+two successive top and bottom, or bottom and top fields yield a valid
+frame. Only when the source was progressive to begin with, e. g. when
+transferring film to video, two fields may come from the same frame,
+creating a natural order.
+
+Counter to intuition the top field is not necessarily the older field.
+Whether the older field contains the top or bottom lines is a convention
+determined by the video standard. Hence the distinction between temporal
+and spatial order of fields. The diagrams below should make this
+clearer.
+
+In V4L it is assumed that all video cameras transmit fields on the media
+bus in the same order they were captured, so if the top field was
+captured first (is the older field), the top field is also transmitted
+first on the bus.
+
+All video capture and output devices must report the current field
+order. Some drivers may permit the selection of a different order, to
+this end applications initialize the ``field`` field of struct
+:c:type:`v4l2_pix_format` before calling the
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. If this is not desired it
+should have the value ``V4L2_FIELD_ANY`` (0).
+
+
+enum v4l2_field
+===============
+
+.. c:type:: v4l2_field
+
+.. tabularcolumns:: |p{5.8cm}|p{0.6cm}|p{11.1cm}|
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_FIELD_ANY``
+      - 0
+      - Applications request this field order when any field format
+	is acceptable. Drivers choose depending on hardware capabilities or
+	e.g. the requested image size, and return the actual field order.
+	Drivers must never return ``V4L2_FIELD_ANY``.
+	If multiple field orders are possible the
+	driver must choose one of the possible field orders during
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` or
+	:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>`. struct
+	:c:type:`v4l2_buffer` ``field`` can never be
+	``V4L2_FIELD_ANY``.
+    * - ``V4L2_FIELD_NONE``
+      - 1
+      - Images are in progressive (frame-based) format, not interlaced
+        (field-based).
+    * - ``V4L2_FIELD_TOP``
+      - 2
+      - Images consist of the top (aka odd) field only.
+    * - ``V4L2_FIELD_BOTTOM``
+      - 3
+      - Images consist of the bottom (aka even) field only. Applications
+	may wish to prevent a device from capturing interlaced images
+	because they will have "comb" or "feathering" artefacts around
+	moving objects.
+    * - ``V4L2_FIELD_INTERLACED``
+      - 4
+      - Images contain both fields, interleaved line by line. The temporal
+	order of the fields (whether the top or bottom field is older)
+	depends on the current video standard. In M/NTSC the bottom
+	field is the older field. In all other standards the top field
+	is the older field.
+    * - ``V4L2_FIELD_SEQ_TB``
+      - 5
+      - Images contain both fields, the top field lines are stored first
+	in memory, immediately followed by the bottom field lines. Fields
+	are always stored in temporal order, the older one first in
+	memory. Image sizes refer to the frame, not fields.
+    * - ``V4L2_FIELD_SEQ_BT``
+      - 6
+      - Images contain both fields, the bottom field lines are stored
+	first in memory, immediately followed by the top field lines.
+	Fields are always stored in temporal order, the older one first in
+	memory. Image sizes refer to the frame, not fields.
+    * - ``V4L2_FIELD_ALTERNATE``
+      - 7
+      - The two fields of a frame are passed in separate buffers, in
+	temporal order, i. e. the older one first. To indicate the field
+	parity (whether the current field is a top or bottom field) the
+	driver or application, depending on data direction, must set
+	struct :c:type:`v4l2_buffer` ``field`` to
+	``V4L2_FIELD_TOP`` or ``V4L2_FIELD_BOTTOM``. Any two successive
+	fields pair to build a frame. If fields are successive, without
+	any dropped fields between them (fields can drop individually),
+	can be determined from the struct
+	:c:type:`v4l2_buffer` ``sequence`` field. This
+	format cannot be selected when using the read/write I/O method
+	since there is no way to communicate if a field was a top or
+	bottom field.
+    * - ``V4L2_FIELD_INTERLACED_TB``
+      - 8
+      - Images contain both fields, interleaved line by line, top field
+	first. The top field is the older field.
+    * - ``V4L2_FIELD_INTERLACED_BT``
+      - 9
+      - Images contain both fields, interleaved line by line, top field
+	first. The bottom field is the older field.
+
+
+
+.. _fieldseq-tb:
+
+Field Order, Top Field First Transmitted
+========================================
+
+.. kernel-figure:: fieldseq_tb.svg
+    :alt:    fieldseq_tb.svg
+    :align:  center
+
+    Field Order, Top Field First Transmitted
+
+
+.. _fieldseq-bt:
+
+Field Order, Bottom Field First Transmitted
+===========================================
+
+.. kernel-figure:: fieldseq_bt.svg
+    :alt:    fieldseq_bt.svg
+    :align:  center
+
+    Field Order, Bottom Field First Transmitted
diff --git a/Documentation/userspace-api/media/v4l/fieldseq_bt.svg b/Documentation/userspace-api/media/v4l/fieldseq_bt.svg
new file mode 100644
index 000000000000..b663f6fcb70b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/fieldseq_bt.svg
@@ -0,0 +1,2621 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   id="svg3619"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   xml:space="preserve"
+   width="198.48296mm"
+   height="211.89406mm"
+   viewBox="0 0 703.28606 750.80571"
+   sodipodi:docname="fieldseq_bt.svg"><sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview3621"
+     showgrid="false"
+     units="mm"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     inkscape:zoom="1.0721815"
+     inkscape:cx="8.4175633"
+     inkscape:cy="371.67214"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="g3627" /><metadata
+     id="metadata3625"><rdf:RDF><cc:Work
+	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+     id="defs3623"><clipPath
+       id="clipPath4301"
+       clipPathUnits="userSpaceOnUse"><path
+	 style="clip-rule:evenodd"
+	 inkscape:connector-curvature="0"
+	 id="path4303"
+	 d="M 0,6040 0,0 l 5650,0 0,6040 -5650,0 z m 4786.76,-99.89 103.92,0 0,56.69 -103.92,0 0,0 85.03,-28.35 -85.03,-28.34 z" /></clipPath></defs><g
+     transform="matrix(1.25,0,0,-1.25,-1.0537,751.94632)"
+     inkscape:label="fieldseq_bt"
+     inkscape:groupmode="layer"
+     id="g3627"><path
+       d="m 188.622,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3631"
+       inkscape:connector-curvature="0" /><path
+       d="m 375.693,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3633"
+       inkscape:connector-curvature="0" /><path
+       d="m 282.157,346.001 93.5355,0 0,42.516 -93.5355,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3635"
+       inkscape:connector-curvature="0" /><path
+       d="m 469.228,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3637"
+       inkscape:connector-curvature="0" /><path
+       d="m 95.0867,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3639"
+       inkscape:connector-curvature="0" /><path
+       d="m 1.55156,346.001 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3641"
+       inkscape:connector-curvature="0" /><path
+       d="m 95.0867,482.052 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3643"
+       inkscape:connector-curvature="0" /><path
+       d="m 469.228,482.052 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3645"
+       inkscape:connector-curvature="0" /><path
+       d="m 1.55156,414.027 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3647"
+       inkscape:connector-curvature="0" /><path
+       d="m 188.622,414.027 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3649"
+       inkscape:connector-curvature="0" /><path
+       d="m 375.693,414.027 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3651"
+       inkscape:connector-curvature="0" /><path
+       d="m 469.228,214.201 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3653"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3655"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3657"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3659"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3661"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3663"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3665"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3667"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3669"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3671"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3673"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3675"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3677"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3679"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3681"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3683"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3685"
+       inkscape:connector-curvature="0" /><path
+       d="m 282.157,482.052 93.5355,0 0,42.516 -93.5355,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3687"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,222.704 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3689"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,222.704 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3691"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,231.207 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3693"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,231.207 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3695"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,226.956 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3697"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,226.956 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3699"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,239.711 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3701"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,239.711 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3703"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,235.459 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3705"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,235.459 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3707"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,248.214 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3709"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,248.214 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3711"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,243.962 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3713"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,243.962 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3715"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,256.717 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3717"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,256.717 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3719"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,252.466 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3721"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,252.466 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3723"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,265.22 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3725"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,265.22 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3727"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,260.969 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3729"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,260.969 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3731"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,273.723 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3733"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,273.723 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3735"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,269.472 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3737"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,269.472 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3739"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,277.975 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3741"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,277.975 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3743"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,218.453 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3745"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,218.453 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3747"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,282.227 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3749"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,282.227 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3751"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3753"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3755"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3757"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3759"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3761"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3763"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3765"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3767"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3769"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3771"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3773"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3775"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3777"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3779"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3781"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3783"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3785"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3787"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3789"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3791"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3793"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3795"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3797"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3799"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3801"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3803"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3805"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3807"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3809"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3811"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3813"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3815"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3817"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3819"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3821"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3823"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3825"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3827"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3829"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3831"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3833"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3835"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3837"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3839"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3841"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3843"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3845"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3847"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,380.014 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3849"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,380.014 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3851"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,371.511 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3853"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,371.511 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3855"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,363.007 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3857"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,363.007 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3859"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,354.504 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3861"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,354.504 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3863"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,358.755 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3865"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,358.755 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3867"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,350.252 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3869"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,350.252 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3871"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,367.259 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3873"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,367.259 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3875"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,375.762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3877"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,375.762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3879"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3881"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3883"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3885"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3887"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3889"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3891"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3893"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3895"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3897"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3899"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3901"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3903"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3905"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3907"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3909"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3911"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3913"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,375.762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3915"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3917"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,367.259 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3919"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3921"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,358.755 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3923"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3925"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,350.252 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3927"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3929"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,380.014 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3931"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3933"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,371.511 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3935"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3937"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,363.007 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3939"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3941"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,354.504 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3943"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3945"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3947"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3949"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3951"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3953"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3955"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3957"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3959"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3961"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3963"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3965"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3967"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3969"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3971"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3973"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3975"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3977"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3979"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3981"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3983"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3985"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3987"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3989"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3991"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3993"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3995"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path3997"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path3999"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4001"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4003"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4005"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4007"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4009"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,448.039 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4011"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4013"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,439.536 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4015"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4017"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,431.033 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4019"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4021"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,422.53 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4023"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4025"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,443.788 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4027"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4029"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,435.284 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4031"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4033"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,426.781 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4035"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4037"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,418.278 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4039"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,511.813 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4041"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,511.813 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4043"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,503.31 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4045"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,503.31 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4047"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,494.807 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4049"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,494.807 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4051"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,486.304 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4053"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,486.304 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4055"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,516.065 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4057"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,516.065 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4059"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,507.562 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4061"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,507.562 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4063"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,499.059 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4065"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,499.059 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4067"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,490.555 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4069"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,490.555 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4071"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,516.065 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4073"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,516.065 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4075"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,507.562 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4077"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,507.562 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4079"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,499.059 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4081"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,499.059 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4083"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,490.555 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4085"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,490.555 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4087"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,494.807 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4089"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,494.807 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4091"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,486.304 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4093"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,486.304 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4095"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,503.31 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4097"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,503.31 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4099"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,511.813 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4101"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,511.813 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4103"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,511.813 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4105"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,511.813 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4107"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,503.31 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4109"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,503.31 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4111"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,494.807 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4113"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,494.807 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4115"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,486.304 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4117"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,486.304 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4119"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,516.065 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4121"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,516.065 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4123"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,507.562 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4125"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,507.562 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4127"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,499.059 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4129"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,499.059 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4131"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,490.555 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4133"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,490.555 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4135"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4137"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4139"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4141"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4143"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4145"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4147"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4149"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4151"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4153"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4155"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4157"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4159"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4161"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4163"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4165"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4167"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,579.839 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4169"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,579.839 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4171"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,571.336 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4173"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,571.336 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4175"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,562.832 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4177"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,562.832 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4179"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,554.329 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4181"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,554.329 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4183"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,558.581 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4185"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,558.581 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4187"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,550.078 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4189"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,550.078 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4191"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,567.084 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4193"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,567.084 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4195"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,575.587 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4197"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,575.587 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4199"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4201"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4203"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4205"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4207"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4209"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4211"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4213"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4215"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4217"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4219"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4221"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4223"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4225"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4227"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4229"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4231"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4233"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4235"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4237"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4239"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4241"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4243"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4245"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4247"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4249"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4251"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4253"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4255"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4257"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4259"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4261"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4263"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4265"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,579.839 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4267"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4269"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,571.336 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4271"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4273"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,562.832 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4275"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4277"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,554.329 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4279"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4281"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,575.587 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4283"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4285"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,567.084 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4287"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4289"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,558.581 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4291"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4293"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,550.078 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4295"
+       inkscape:connector-curvature="0" /><g
+       transform="scale(0.1,0.1)"
+       id="g4297"
+       style=""><g
+	 id="g4299"
+	 clip-path="url(#clipPath4301)"
+	 style=""><path
+	   d="m 3778.18,5968.45 1105.42,0"
+	   style="fill:none;stroke:#000000;stroke-width:14.17199993;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   id="path4305"
+	   inkscape:connector-curvature="0" /></g></g><path
+       d="m 478.676,594.011 8.503,2.834 -8.503,2.835 0,-5.669"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4307"
+       inkscape:connector-curvature="0" /><path
+       d="m 478.676,594.011 8.503,2.834 -8.503,2.835 0,-5.669 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4309"
+       inkscape:connector-curvature="0" /><path
+       d="m 95.0867,1.62109 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4311"
+       inkscape:connector-curvature="0" /><path
+       d="m 282.157,1.62109 93.5355,0 0,76.5289 -93.5355,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4313"
+       inkscape:connector-curvature="0" /><path
+       d="m 469.228,1.62109 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4315"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,10.1242 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4317"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,10.1242 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4319"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,18.6277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4321"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,18.6277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4323"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,27.1309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4325"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,27.1309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4327"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,35.634 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4329"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,35.634 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4331"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,5.87266 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4333"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,5.87266 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4335"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,14.3762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4337"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,14.3762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4339"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,22.8793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4341"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,22.8793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4343"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,31.3824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4345"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,31.3824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4347"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,10.1242 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4349"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,10.1242 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4351"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,18.6277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4353"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,18.6277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4355"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,27.1309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4357"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,27.1309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4359"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,35.634 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4361"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,35.634 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4363"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,5.87266 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4365"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,5.87266 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4367"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,14.3762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4369"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,14.3762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4371"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,22.8793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4373"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,22.8793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4375"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,31.3824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4377"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,31.3824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4379"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,69.6469 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4381"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,69.6469 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4383"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,65.3953 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4385"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,65.3953 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4387"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,61.1438 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4389"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,61.1438 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4391"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,56.8922 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4393"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,56.8922 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4395"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,52.6402 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4397"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,52.6402 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4399"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,48.3887 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4401"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,48.3887 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4403"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,44.1371 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4405"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,44.1371 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4407"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,5.87266 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4409"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,5.87266 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4411"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,10.1242 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4413"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,10.1242 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4415"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,14.3762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4417"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,14.3762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4419"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,18.6277 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4421"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,18.6277 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4423"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,22.8793 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4425"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,22.8793 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4427"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,27.1309 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4429"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,27.1309 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4431"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,31.3824 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4433"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,31.3824 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4435"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,39.8855 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4437"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,39.8855 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4439"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,35.634 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4441"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,35.634 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4443"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,39.8855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4445"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,39.8855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4447"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,48.3887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4449"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,48.3887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4451"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,56.8922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4453"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,56.8922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4455"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,65.3953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4457"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,65.3953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4459"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,44.1371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4461"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,44.1371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4463"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,52.6402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4465"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,52.6402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4467"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,61.1438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4469"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,61.1438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4471"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,69.6469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4473"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,69.6469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4475"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,39.8855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4477"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,39.8855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4479"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,48.3887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4481"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,48.3887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4483"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,56.8922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4485"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,56.8922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4487"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,65.3953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4489"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,65.3953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4491"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,44.1371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4493"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,44.1371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4495"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,52.6402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4497"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,52.6402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4499"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,61.1438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4501"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,61.1438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4503"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,69.6469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4505"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,69.6469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4507"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4509"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4511"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4513"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4515"
+       inkscape:connector-curvature="0" /><path
+       d="m 188.622,107.911 93.5352,0 0,76.5285 -93.5352,0 0,-76.5285 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4517"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4519"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4521"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4523"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4525"
+       inkscape:connector-curvature="0" /><path
+       d="m 375.693,107.911 93.5352,0 0,76.5285 -93.5352,0 0,-76.5285 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4527"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4529"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,116.414 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4531"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4533"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,112.163 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4535"
+       inkscape:connector-curvature="0" /><path
+       d="m 1.55156,107.911 93.5352,0 0,76.5285 -93.5352,0 0,-76.5285 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4537"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4539"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4541"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4543"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4545"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4547"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4549"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4551"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4553"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4555"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4557"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4559"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4561"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4563"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4565"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4567"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4569"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4571"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4573"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4575"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4577"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4579"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4581"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4583"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4585"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4587"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4589"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4591"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4593"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4595"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4597"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4599"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4601"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4603"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4605"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4607"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4609"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4611"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4613"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4615"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4617"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4619"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4621"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4623"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4625"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4627"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4629"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4631"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4633"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4635"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4637"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4639"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4641"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4643"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4645"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4647"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4649"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4651"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,175.937 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4653"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4655"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,167.434 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4657"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4659"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,158.93 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4661"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4663"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,150.427 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4665"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4667"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,141.924 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4669"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4671"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,133.421 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4673"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4675"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,124.918 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4677"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4679"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,171.685 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4681"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4683"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,163.182 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4685"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4687"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,154.679 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4689"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4691"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,146.176 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4693"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4695"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,137.672 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4697"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4699"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,129.169 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4701"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4703"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,120.666 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4705"
+       inkscape:connector-curvature="0" /><path
+       d="m 95.0867,214.201 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4707"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,222.704 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4709"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,222.704 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4711"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,231.207 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4713"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,231.207 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4715"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,226.956 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4717"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,226.956 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4719"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,239.711 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4721"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,239.711 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4723"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,235.459 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4725"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,235.459 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4727"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,248.214 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4729"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,248.214 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4731"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,243.962 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4733"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,243.962 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4735"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,256.717 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4737"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,256.717 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4739"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,252.466 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4741"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,252.466 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4743"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,265.22 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4745"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,265.22 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4747"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,260.969 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4749"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,260.969 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4751"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,273.723 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4753"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,273.723 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4755"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,269.472 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4757"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,269.472 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4759"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,277.975 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4761"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,277.975 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4763"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,218.453 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4765"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,218.453 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4767"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,282.227 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4769"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,282.227 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4771"
+       inkscape:connector-curvature="0" /><path
+       d="m 282.157,214.201 93.5355,0 0,76.5289 -93.5355,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4773"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,277.975 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4775"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,277.975 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4777"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,282.227 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4779"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,282.227 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4781"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,273.723 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4783"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,273.723 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4785"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,248.214 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4787"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,248.214 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4789"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,239.711 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4791"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,239.711 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4793"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,231.207 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4795"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,231.207 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4797"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,222.704 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4799"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,222.704 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4801"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,269.472 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4803"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,269.472 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4805"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,256.717 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4807"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,256.717 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4809"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,265.22 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4811"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,265.22 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4813"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,260.969 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4815"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,260.969 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4817"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,252.466 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4819"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,252.466 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4821"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,243.962 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4823"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,243.962 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4825"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,235.459 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4827"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,235.459 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4829"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,226.956 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4831"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,226.956 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4833"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,218.453 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path4835"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,218.453 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path4837"
+       inkscape:connector-curvature="0" /><text
+       y="-533.07098"
+       x="5.8031301"
+       id="text4841"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4843"
+	 sodipodi:role="line"
+	 y="-533.07098"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan><tspan
+	 id="tspan4845"
+	 sodipodi:role="line"
+	 y="-465.04559"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan><tspan
+	 id="tspan4847"
+	 sodipodi:role="line"
+	 y="-397.0202"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
+<text
+       y="-316.23969"
+       x="103.58983"
+       id="text4849"
+       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4851"
+	 sodipodi:role="line"
+	 y="-316.23969"
+	 x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOM</tspan><tspan
+	 id="tspan4853"
+	 sodipodi:role="line"
+	 y="-328.99481"
+	 x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text>
+<text
+       y="-592.59381"
+       x="5.8034"
+       id="text4855"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4857"
+	 sodipodi:role="line"
+	 y="-592.59381"
+	 x="5.8034 13.134789 19.806232 29.801399 36.472843 43.144287 47.139954 53.811398 56.475174 59.810898 66.482346 70.478004 77.149452 83.820892 87.816566 91.152283 94.488007 101.15945 107.83089 111.16662 114.50233 121.17377 131.16895 134.50468 137.84041 140.50418 147.17563 149.8394 156.51085 159.84657 163.1823 165.84607 169.84174 175.84123 179.17696 182.51268 185.8484 189.84407 196.51552 203.18695 209.18646 219.18163 221.8454 225.18112 228.51685 235.18829 241.85973 245.19545 249.19112 255.86256 259.19827 265.86972 269.20544 272.54117 282.53635 285.87207 294.53534 301.86673 309.87006 318.53336">Temporal order, bottom field first transmitted (e.g. M/NTSC)</tspan></text>
+<text
+       y="-316.23981"
+       x="290.6604"
+       id="text4859"
+       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4861"
+	 sodipodi:role="line"
+	 y="-316.23981"
+	 x="290.6604 296.16284 300.74957 305.3363 309.92303 314.50977 319.55023 321.8436 327.34601 331.93274 337.88889 342.47565 347.51608 353.9342 477.73062 483.23306 487.81979 492.40652 496.99326 501.57999 506.62045 508.91382 514.41626 519.00299 524.95911 529.5459 534.5863 541.00446">V4L2_FIELD_TOPV4L2_FIELD_TOP</tspan></text>
+<text
+       y="-299.23349"
+       x="5.8034"
+       id="text4863"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4865"
+	 sodipodi:role="line"
+	 y="-299.23349"
+	 x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_BT</tspan><tspan
+	 id="tspan4867"
+	 sodipodi:role="line"
+	 y="-192.9435"
+	 x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001">V4L2_FIELD_INTERLACED_TB (misaligned)</tspan><tspan
+	 id="tspan4869"
+	 sodipodi:role="line"
+	 y="-86.653496"
+	 x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579">V4L2_FIELD_SEQ_BT</tspan></text>
+<text
+       y="-533.07098"
+       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464"
+       id="text4592"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4594"
+	 sodipodi:role="line"
+	 y="-533.07098"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan></text>
+<text
+       y="-465.04559"
+       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054"
+       id="text4596"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4598"
+	 sodipodi:role="line"
+	 y="-465.04559"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan></text>
+<text
+       y="-397.0202"
+       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963"
+       id="text4600"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4602"
+	 sodipodi:role="line"
+	 y="-397.0202"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
+<text
+       y="-299.23349"
+       x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012"
+       id="text5862"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan5864"
+	 sodipodi:role="line"
+	 y="-299.23349"
+	 x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_BT</tspan></text>
+<text
+       y="-192.9435"
+       x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001"
+       id="text5866"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan5868"
+	 sodipodi:role="line"
+	 y="-192.9435"
+	 x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001">V4L2_FIELD_INTERLACED_TB (misaligned)</tspan></text>
+<text
+       y="-86.653496"
+       x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579"
+       id="text5870"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan5872"
+	 sodipodi:role="line"
+	 y="-86.653496"
+	 x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579">V4L2_FIELD_SEQ_BT</tspan></text>
+<text
+       y="-316.23969"
+       x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659"
+       id="text7144"
+       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan7146"
+	 sodipodi:role="line"
+	 y="-316.23969"
+	 x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOM</tspan></text>
+<text
+       y="-328.99481"
+       x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322"
+       id="text7148"
+       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan7150"
+	 sodipodi:role="line"
+	 y="-328.99481"
+	 x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text>
+</g></svg>
diff --git a/Documentation/userspace-api/media/v4l/fieldseq_tb.svg b/Documentation/userspace-api/media/v4l/fieldseq_tb.svg
new file mode 100644
index 000000000000..f8b440a1cb60
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/fieldseq_tb.svg
@@ -0,0 +1,2618 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   id="svg5543"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   xml:space="preserve"
+   width="198.48296mm"
+   height="210.39415mm"
+   viewBox="0 0 703.28607 745.49109"
+   sodipodi:docname="fieldseq_tb.svg"><sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview5545"
+     showgrid="false"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     units="mm"
+     inkscape:zoom="1.0733333"
+     inkscape:cx="9.8391479"
+     inkscape:cy="370.19322"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="g5551" /><metadata
+     id="metadata5549"><rdf:RDF><cc:Work
+	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+     id="defs5547"><clipPath
+       id="clipPath6753"
+       clipPathUnits="userSpaceOnUse"><path
+	 style="clip-rule:evenodd"
+	 inkscape:connector-curvature="0"
+	 id="path6755"
+	 d="M 0,6000 0,0 l 5660,0 0,6000 -5660,0 z m 4786.76,-102.89 103.92,0 0,56.69 -103.92,0 0,0 85.03,-28.35 -85.03,-28.34 z" /></clipPath></defs><g
+     transform="matrix(1.25,0,0,-1.25,-1.0537,746.57119)"
+     inkscape:label="fieldseq_tb"
+     inkscape:groupmode="layer"
+     id="g5551"><path
+       d="m 379.944,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5555"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5557"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5559"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5561"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5563"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5565"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5567"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5569"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5571"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5573"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5575"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5577"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5579"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5581"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5583"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5585"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5587"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5589"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5591"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5593"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5595"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5597"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5599"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5601"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5603"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5605"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5607"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5609"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5611"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5613"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5615"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5617"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5619"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5621"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5623"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5625"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5627"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5629"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5631"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5633"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5635"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5637"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5639"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5641"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5643"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5645"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5647"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5649"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,443.739 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5651"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,443.739 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5653"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,435.236 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5655"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,435.236 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5657"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,426.733 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5659"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,426.733 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5661"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,418.23 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5663"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,418.23 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5665"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,439.488 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5667"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,439.488 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5669"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,430.984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5671"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,430.984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5673"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,422.481 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5675"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,422.481 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5677"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,413.978 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5679"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,413.978 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5681"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,218.404 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5683"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,218.404 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5685"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,226.907 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5687"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,226.907 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5689"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,222.656 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5691"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,222.656 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5693"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,235.411 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5695"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,235.411 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5697"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,231.159 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5699"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,231.159 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5701"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,243.914 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5703"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,243.914 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5705"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,239.662 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5707"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,239.662 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5709"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,252.417 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5711"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,252.417 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5713"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,248.166 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5715"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,248.166 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5717"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,260.92 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5719"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,260.92 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5721"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,256.669 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5723"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,256.669 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5725"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,269.423 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5727"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,269.423 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5729"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,265.172 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5731"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,265.172 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5733"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,273.675 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5735"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,273.675 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5737"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,214.153 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5739"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,214.153 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5741"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,277.927 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5743"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,277.927 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5745"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,218.404 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5747"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,218.404 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5749"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,226.907 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5751"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,226.907 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5753"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,222.656 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5755"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,222.656 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5757"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,235.411 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5759"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,235.411 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5761"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,231.159 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5763"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,231.159 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5765"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,243.914 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5767"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,243.914 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5769"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,239.662 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5771"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,239.662 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5773"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,252.417 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5775"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,252.417 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5777"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,248.166 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5779"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,248.166 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5781"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,260.92 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5783"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,260.92 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5785"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,256.669 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5787"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,256.669 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5789"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,269.423 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5791"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,269.423 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5793"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,265.172 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5795"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,265.172 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5797"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,273.675 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5799"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,273.675 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5801"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,214.153 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5803"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,214.153 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5805"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,277.927 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5807"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,277.927 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5809"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5811"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5813"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5815"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5817"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5819"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5821"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5823"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5825"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5827"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5829"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5831"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5833"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5835"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5837"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5839"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5841"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5843"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5845"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5847"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5849"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5851"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5853"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5855"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5857"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5859"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5861"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5863"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5865"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5867"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5869"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5871"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5873"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,35.5855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5875"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,35.5855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5877"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,27.0824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5879"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,27.0824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5881"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,18.5793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5883"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,18.5793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5885"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,10.0762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5887"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,10.0762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5889"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,31.334 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5891"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,31.334 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5893"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,22.8309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5895"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,22.8309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5897"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,14.3277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5899"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,14.3277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5901"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,5.82422 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5903"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,5.82422 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5905"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,35.5855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5907"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,35.5855 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5909"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,27.0824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5911"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,27.0824 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5913"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,18.5793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5915"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,18.5793 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5917"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,10.0762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5919"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,10.0762 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5921"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,31.334 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5923"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,31.334 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5925"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,22.8309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5927"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,22.8309 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5929"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,14.3277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5931"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,14.3277 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5933"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,5.82422 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5935"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,5.82422 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5937"
+       inkscape:connector-curvature="0" /><path
+       d="m 95.0867,409.727 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5939"
+       inkscape:connector-curvature="0" /><path
+       d="m 282.157,409.727 93.5355,0 0,42.516 -93.5355,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5941"
+       inkscape:connector-curvature="0" /><path
+       d="m 469.228,409.727 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5943"
+       inkscape:connector-curvature="0" /><path
+       d="m 469.228,209.901 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5945"
+       inkscape:connector-curvature="0" /><path
+       d="m 282.157,209.901 93.5355,0 0,76.5289 -93.5355,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5947"
+       inkscape:connector-curvature="0" /><path
+       d="m 95.0867,209.901 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5949"
+       inkscape:connector-curvature="0" /><path
+       d="m 95.0867,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5951"
+       inkscape:connector-curvature="0" /><path
+       d="m 282.157,341.701 93.5355,0 0,42.516 -93.5355,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5953"
+       inkscape:connector-curvature="0" /><path
+       d="m 469.228,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5955"
+       inkscape:connector-curvature="0" /><path
+       d="m 1.55156,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5957"
+       inkscape:connector-curvature="0" /><path
+       d="m 188.622,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5959"
+       inkscape:connector-curvature="0" /><path
+       d="m 375.693,341.701 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5961"
+       inkscape:connector-curvature="0" /><path
+       d="m 1.55156,477.752 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5963"
+       inkscape:connector-curvature="0" /><path
+       d="m 188.622,477.752 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5965"
+       inkscape:connector-curvature="0" /><path
+       d="m 375.693,477.752 93.5352,0 0,42.516 -93.5352,0 0,-42.516 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5967"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5969"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5971"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5973"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5975"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5977"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5979"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5981"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5983"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5985"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5987"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5989"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5991"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5993"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5995"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path5997"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path5999"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6001"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6003"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6005"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6007"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6009"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6011"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6013"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6015"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6017"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6019"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6021"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6023"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6025"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6027"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6029"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6031"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6033"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6035"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6037"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6039"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6041"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6043"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6045"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6047"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6049"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6051"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6053"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6055"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6057"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6059"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6061"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6063"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,443.739 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6065"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,443.739 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6067"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,435.236 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6069"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,435.236 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6071"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,426.733 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6073"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,426.733 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6075"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,418.23 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6077"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,418.23 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6079"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,439.488 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6081"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,439.488 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6083"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,430.984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6085"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,430.984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6087"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,422.481 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6089"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,422.481 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6091"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,413.978 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6093"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,413.978 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6095"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6097"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,575.539 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6099"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,575.539 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6101"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,575.539 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6103"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6105"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,571.287 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6107"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6109"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,567.036 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6111"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6113"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,562.784 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6115"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6117"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,558.532 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6119"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6121"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,554.281 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6123"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6125"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,550.029 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6127"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6129"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,545.778 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6131"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6133"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,511.765 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6135"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6137"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,507.513 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6139"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6141"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,503.262 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6143"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6145"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,499.01 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6147"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6149"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,494.759 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6151"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6153"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,490.507 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6155"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6157"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,486.255 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6159"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6161"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,482.004 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6163"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6165"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6167"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6169"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6171"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6173"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6175"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6177"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6179"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6181"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6183"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6185"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6187"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6189"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6191"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6193"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6195"
+       inkscape:connector-curvature="0" /><path
+       d="m 1.55156,107.863 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6197"
+       inkscape:connector-curvature="0" /><path
+       d="m 188.622,107.863 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6199"
+       inkscape:connector-curvature="0" /><path
+       d="m 375.693,107.863 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6201"
+       inkscape:connector-curvature="0" /><path
+       d="m 95.0867,1.57266 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6203"
+       inkscape:connector-curvature="0" /><path
+       d="m 282.157,1.57266 93.5355,0 0,76.5289 -93.5355,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6205"
+       inkscape:connector-curvature="0" /><path
+       d="m 469.228,1.57266 93.5352,0 0,76.5289 -93.5352,0 0,-76.5289 z"
+       style="fill:none;stroke:#000000;stroke-width:1.41719997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6207"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,65.3469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6209"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,65.3469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6211"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,56.8438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6213"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,56.8438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6215"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,48.3402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6217"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,48.3402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6219"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,39.8371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6221"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,39.8371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6223"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,69.5984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6225"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,69.5984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6227"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,61.0953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6229"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,61.0953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6231"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,52.5922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6233"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,52.5922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6235"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,44.0887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6237"
+       inkscape:connector-curvature="0" /><path
+       d="m 473.479,44.0887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6239"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,65.3469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6241"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,65.3469 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6243"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,56.8438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6245"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,56.8438 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6247"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,48.3402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6249"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,48.3402 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6251"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,39.8371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6253"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,39.8371 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6255"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,69.5984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6257"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,69.5984 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6259"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,61.0953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6261"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,61.0953 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6263"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,52.5922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6265"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,52.5922 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6267"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,44.0887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6269"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,44.0887 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6271"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,277.927 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6273"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,277.927 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6275"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,269.423 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6277"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,269.423 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6279"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,260.92 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6281"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,260.92 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6283"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,252.417 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6285"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,252.417 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6287"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,243.914 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6289"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,243.914 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6291"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,235.411 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6293"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,235.411 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6295"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,226.907 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6297"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,226.907 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6299"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,218.404 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6301"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,218.404 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6303"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,69.5984 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6305"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,69.5984 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6307"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,65.3469 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6309"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,65.3469 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6311"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,61.0953 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6313"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,61.0953 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6315"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,56.8438 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6317"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,56.8438 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6319"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,52.5922 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6321"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,52.5922 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6323"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,48.3402 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6325"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,48.3402 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6327"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,44.0887 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6329"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,44.0887 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6331"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,39.8371 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6333"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,39.8371 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6335"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,571.287 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6337"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,571.287 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6339"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,567.036 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6341"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,567.036 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6343"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,562.784 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6345"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,562.784 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6347"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,558.532 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6349"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,558.532 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6351"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,554.281 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6353"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,554.281 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6355"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,550.029 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6357"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,550.029 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6359"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,545.778 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6361"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,545.778 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6363"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,443.739 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6365"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,443.739 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6367"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,439.488 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6369"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,439.488 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6371"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,435.236 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6373"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,435.236 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6375"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,430.984 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6377"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,430.984 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6379"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,426.733 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6381"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,426.733 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6383"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,422.481 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6385"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,422.481 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6387"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,418.23 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6389"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,418.23 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6391"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,413.978 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6393"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,413.978 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6395"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,375.714 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6397"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,375.714 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6399"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,371.462 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6401"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,371.462 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6403"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,367.211 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6405"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,367.211 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6407"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,362.959 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6409"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,362.959 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6411"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,358.707 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6413"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,358.707 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6415"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,354.455 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6417"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,354.455 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6419"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,350.204 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6421"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,350.204 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6423"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,345.952 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6425"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,345.952 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6427"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,273.675 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6429"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,273.675 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6431"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,265.172 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6433"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,265.172 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6435"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,256.669 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6437"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,256.669 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6439"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,248.166 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6441"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,248.166 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6443"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,239.662 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6445"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,239.662 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6447"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,231.159 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6449"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,231.159 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6451"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,222.656 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6453"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,222.656 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6455"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,214.153 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6457"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,214.153 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6459"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,35.5855 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6461"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,35.5855 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6463"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,31.334 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6465"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,31.334 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6467"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,27.0824 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6469"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,27.0824 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6471"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,22.8309 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6473"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,22.8309 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6475"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,18.5793 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6477"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,18.5793 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6479"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,14.3277 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6481"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,14.3277 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6483"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,10.0762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6485"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,10.0762 85.0316,0 0,4.25156 -85.0316,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6487"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,5.82422 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6489"
+       inkscape:connector-curvature="0" /><path
+       d="m 286.409,5.82422 85.0316,0 0,4.25195 -85.0316,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6491"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6493"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6495"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6497"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6499"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6501"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6503"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6505"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6507"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6509"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6511"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6513"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6515"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6517"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6519"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#008f00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6521"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6523"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6525"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6527"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6529"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6531"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6533"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6535"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6537"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6539"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6541"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6543"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6545"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6547"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6549"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6551"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6553"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6555"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6557"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6559"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6561"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6563"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6565"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6567"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6569"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6571"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6573"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6575"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6577"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6579"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6581"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6583"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6585"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6587"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6589"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,175.888 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6591"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6593"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,167.385 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6595"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6597"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,158.882 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6599"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6601"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,150.379 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6603"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6605"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,141.876 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6607"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6609"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,133.372 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6611"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6613"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,124.869 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6615"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#d10000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6617"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,116.366 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6619"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6621"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,375.714 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6623"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6625"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,367.211 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6627"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6629"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,358.707 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6631"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6633"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,350.204 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6635"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6637"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,371.462 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6639"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6641"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,362.959 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6643"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6645"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,354.455 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6647"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6649"
+       inkscape:connector-curvature="0" /><path
+       d="m 99.3383,345.952 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6651"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6653"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6655"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6657"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6659"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6661"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6663"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6665"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6667"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6669"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6671"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6673"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6675"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6677"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6679"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#0000d1;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6681"
+       inkscape:connector-curvature="0" /><path
+       d="m 192.873,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6683"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6685"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6687"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6689"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6691"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6693"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6695"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6697"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6699"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6701"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6703"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6705"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6707"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6709"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6711"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6713"
+       inkscape:connector-curvature="0" /><path
+       d="m 379.944,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6715"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6717"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,171.637 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6719"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6721"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,163.134 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6723"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6725"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,154.63 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6727"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6729"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,146.127 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6731"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6733"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,137.624 85.032,0 0,4.25195 -85.032,0 0,-4.25195 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6735"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6737"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,129.121 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6739"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6741"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,120.618 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6743"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:#ffff00;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6745"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.80312,112.114 85.032,0 0,4.25156 -85.032,0 0,-4.25156 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6747"
+       inkscape:connector-curvature="0" /><g
+       transform="scale(0.1,0.1)"
+       id="g6749"
+       style=""><g
+	 id="g6751"
+	 clip-path="url(#clipPath6753)"
+	 style=""><path
+	   d="m 3778.18,5925.45 1105.42,0"
+	   style="fill:none;stroke:#000000;stroke-width:14.17199993;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   id="path6757"
+	   inkscape:connector-curvature="0" /></g></g><path
+       d="m 478.676,589.711 8.503,2.834 -8.503,2.835 0,-5.669"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path6759"
+       inkscape:connector-curvature="0" /><path
+       d="m 478.676,589.711 8.503,2.834 -8.503,2.835 0,-5.669 z"
+       style="fill:none;stroke:#000000;stroke-width:0.35429999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path6761"
+       inkscape:connector-curvature="0" /><text
+       y="-528.771"
+       x="5.8031301"
+       id="text6765"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan6767"
+	 sodipodi:role="line"
+	 y="-528.771"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan><tspan
+	 id="tspan6769"
+	 sodipodi:role="line"
+	 y="-460.74561"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan><tspan
+	 id="tspan6771"
+	 sodipodi:role="line"
+	 y="-392.72021"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
+<text
+       y="-324.69479"
+       x="10.05469"
+       id="text6773"
+       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan6775"
+	 sodipodi:role="line"
+	 y="-324.69479"
+	 x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048">v4l2_buffer.field:</tspan><tspan
+	 id="tspan6777"
+	 sodipodi:role="line"
+	 y="-311.9397"
+	 x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338
+538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text>
+<text
+       y="-588.2937"
+       x="5.8031301"
+       id="text6779"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan6781"
+	 sodipodi:role="line"
+	 y="-588.2937"
+	 x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096">Temporal order, top field first transmitted (e.g. BG/PAL)</tspan><tspan
+	 id="tspan6783"
+	 sodipodi:role="line"
+	 y="-86.604706"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357">V4L2_FIELD_SEQ_TB</tspan><tspan
+	 id="tspan6785"
+	 sodipodi:role="line"
+	 y="-192.89471"
+	 x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286">V4L2_FIELD_INTERLACED_BT (misaligned)</tspan><tspan
+	 id="tspan6787"
+	 sodipodi:role="line"
+	 y="-294.93271"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_TB</tspan></text>
+<text
+       y="-528.771"
+       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464"
+       id="text4583"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4585"
+	 sodipodi:role="line"
+	 y="-528.771"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan></text>
+<text
+       y="-460.74561"
+       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054"
+       id="text4587"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4589"
+	 sodipodi:role="line"
+	 y="-460.74561"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan></text>
+<text
+       y="-392.72021"
+       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963"
+       id="text4591"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan4593"
+	 sodipodi:role="line"
+	 y="-392.72021"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
+<text
+       y="-588.2937"
+       x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096"
+       id="text5847"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan5849"
+	 sodipodi:role="line"
+	 y="-588.2937"
+	 x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096">Temporal order, top field first transmitted (e.g. BG/PAL)</tspan></text>
+<text
+       y="-86.604706"
+       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357"
+       id="text5851"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan5853"
+	 sodipodi:role="line"
+	 y="-86.604706"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357">V4L2_FIELD_SEQ_TB</tspan></text>
+<text
+       y="-192.89471"
+       x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286"
+       id="text5855"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan5857"
+	 sodipodi:role="line"
+	 y="-192.89471"
+	 x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286">V4L2_FIELD_INTERLACED_BT (misaligned)</tspan></text>
+<text
+       y="-294.93271"
+       x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791"
+       id="text5859"
+       style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan5861"
+	 sodipodi:role="line"
+	 y="-294.93271"
+	 x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_TB</tspan></text>
+<text
+       y="-324.69479"
+       x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048"
+       id="text7131"
+       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan7133"
+	 sodipodi:role="line"
+	 y="-324.69479"
+	 x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048">v4l2_buffer.field:</tspan></text>
+<text
+       y="-311.9397"
+       x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338
+538.00385 543.04431 549.4624"
+       id="text7135"
+       style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan7137"
+	 sodipodi:role="line"
+	 y="-311.9397"
+	 x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338
+538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text>
+</g></svg>
diff --git a/Documentation/userspace-api/media/v4l/format.rst b/Documentation/userspace-api/media/v4l/format.rst
new file mode 100644
index 000000000000..e47fc0505727
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/format.rst
@@ -0,0 +1,99 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _format:
+
+************
+Data Formats
+************
+
+
+Data Format Negotiation
+=======================
+
+Different devices exchange different kinds of data with applications,
+for example video images, raw or sliced VBI data, RDS datagrams. Even
+within one kind many different formats are possible, in particular there is an
+abundance of image formats. Although drivers must provide a default and
+the selection persists across closing and reopening a device,
+applications should always negotiate a data format before engaging in
+data exchange. Negotiation means the application asks for a particular
+format and the driver selects and reports the best the hardware can do
+to satisfy the request. Of course applications can also just query the
+current selection.
+
+A single mechanism exists to negotiate all data formats using the
+aggregate struct :c:type:`v4l2_format` and the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctls. Additionally the
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl can be used to examine
+what the hardware *could* do, without actually selecting a new data
+format. The data formats supported by the V4L2 API are covered in the
+respective device section in :ref:`devices`. For a closer look at
+image formats see :ref:`pixfmt`.
+
+The :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl is a major turning-point in the
+initialization sequence. Prior to this point multiple panel applications
+can access the same device concurrently to select the current input,
+change controls or modify other properties. The first :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
+assigns a logical stream (video data, VBI data etc.) exclusively to one
+file descriptor.
+
+Exclusive means no other application, more precisely no other file
+descriptor, can grab this stream or change device properties
+inconsistent with the negotiated parameters. A video standard change for
+example, when the new standard uses a different number of scan lines,
+can invalidate the selected image format. Therefore only the file
+descriptor owning the stream can make invalidating changes. Accordingly
+multiple file descriptors which grabbed different logical streams
+prevent each other from interfering with their settings. When for
+example video overlay is about to start or already in progress,
+simultaneous video capturing may be restricted to the same cropping and
+image size.
+
+When applications omit the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl its locking side
+effects are implied by the next step, the selection of an I/O method
+with the :ref:`VIDIOC_REQBUFS` ioctl or implicit
+with the first :ref:`read() <func-read>` or
+:ref:`write() <func-write>` call.
+
+Generally only one logical stream can be assigned to a file descriptor,
+the exception being drivers permitting simultaneous video capturing and
+overlay using the same file descriptor for compatibility with V4L and
+earlier versions of V4L2. Switching the logical stream or returning into
+"panel mode" is possible by closing and reopening the device. Drivers
+*may* support a switch using :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`.
+
+All drivers exchanging data with applications must support the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. Implementation of the
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is highly recommended but optional.
+
+
+Image Format Enumeration
+========================
+
+Apart of the generic format negotiation functions a special ioctl to
+enumerate all image formats supported by video capture, overlay or
+output devices is available. [#f1]_
+
+The :ref:`VIDIOC_ENUM_FMT` ioctl must be supported
+by all drivers exchanging image data with applications.
+
+.. important::
+
+    Drivers are not supposed to convert image formats in kernel space.
+    They must enumerate only formats directly supported by the hardware.
+    If necessary driver writers should publish an example conversion
+    routine or library for integration into applications.
+
+.. [#f1]
+   Enumerating formats an application has no a-priori knowledge of
+   (otherwise it could explicitly ask for them and need not enumerate)
+   seems useless, but there are applications serving as proxy between
+   drivers and the actual video applications for which this is useful.
diff --git a/Documentation/userspace-api/media/v4l/fourcc.rst b/Documentation/userspace-api/media/v4l/fourcc.rst
new file mode 100644
index 000000000000..d3482c40da62
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/fourcc.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Guidelines for Video4Linux pixel format 4CCs
+============================================
+
+Guidelines for Video4Linux 4CC codes defined using v4l2_fourcc() are
+specified in this document. First of the characters defines the nature of
+the pixel format, compression and colour space. The interpretation of the
+other three characters depends on the first one.
+
+Existing 4CCs may not obey these guidelines.
+
+Raw bayer
+---------
+
+The following first characters are used by raw bayer formats:
+
+- B: raw bayer, uncompressed
+- b: raw bayer, DPCM compressed
+- a: A-law compressed
+- u: u-law compressed
+
+2nd character: pixel order
+
+- B: BGGR
+- G: GBRG
+- g: GRBG
+- R: RGGB
+
+3rd character: uncompressed bits-per-pixel 0--9, A--
+
+4th character: compressed bits-per-pixel 0--9, A--
diff --git a/Documentation/userspace-api/media/v4l/func-close.rst b/Documentation/userspace-api/media/v4l/func-close.rst
new file mode 100644
index 000000000000..37a64dae56b0
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/func-close.rst
@@ -0,0 +1,56 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _func-close:
+
+************
+V4L2 close()
+************
+
+Name
+====
+
+v4l2-close - Close a V4L2 device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: int close( int fd )
+    :name: v4l2-close
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+
+Description
+===========
+
+Closes the device. Any I/O in progress is terminated and resources
+associated with the file descriptor are freed. However data format
+parameters, current input or output, control values or other properties
+remain unchanged.
+
+
+Return Value
+============
+
+The function returns 0 on success, -1 on failure and the ``errno`` is
+set appropriately. Possible error codes:
+
+EBADF
+    ``fd`` is not a valid open file descriptor.
diff --git a/Documentation/userspace-api/media/v4l/func-ioctl.rst b/Documentation/userspace-api/media/v4l/func-ioctl.rst
new file mode 100644
index 000000000000..4e69f303636b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/func-ioctl.rst
@@ -0,0 +1,69 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _func-ioctl:
+
+************
+V4L2 ioctl()
+************
+
+Name
+====
+
+v4l2-ioctl - Program a V4L2 device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <sys/ioctl.h>
+
+
+.. c:function:: int ioctl( int fd, int request, void *argp )
+    :name: v4l2-ioctl
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``request``
+    V4L2 ioctl request code as defined in the ``videodev2.h`` header
+    file, for example VIDIOC_QUERYCAP.
+
+``argp``
+    Pointer to a function parameter, usually a structure.
+
+
+Description
+===========
+
+The :ref:`ioctl() <func-ioctl>` function is used to program V4L2 devices. The
+argument ``fd`` must be an open file descriptor. An ioctl ``request``
+has encoded in it whether the argument is an input, output or read/write
+parameter, and the size of the argument ``argp`` in bytes. Macros and
+defines specifying V4L2 ioctl requests are located in the
+``videodev2.h`` header file. Applications should use their own copy, not
+include the version in the kernel sources on the system they compile on.
+All V4L2 ioctl requests, their respective function and parameters are
+specified in :ref:`user-func`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+When an ioctl that takes an output or read/write parameter fails, the
+parameter remains unmodified.
diff --git a/Documentation/userspace-api/media/v4l/func-mmap.rst b/Documentation/userspace-api/media/v4l/func-mmap.rst
new file mode 100644
index 000000000000..f9c77bdce434
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/func-mmap.rst
@@ -0,0 +1,148 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _func-mmap:
+
+***********
+V4L2 mmap()
+***********
+
+Name
+====
+
+v4l2-mmap - Map device memory into application address space
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+    #include <sys/mman.h>
+
+
+.. c:function:: void *mmap( void *start, size_t length, int prot, int flags, int fd, off_t offset )
+    :name: v4l2-mmap
+
+Arguments
+=========
+
+``start``
+    Map the buffer to this address in the application's address space.
+    When the ``MAP_FIXED`` flag is specified, ``start`` must be a
+    multiple of the pagesize and mmap will fail when the specified
+    address cannot be used. Use of this option is discouraged;
+    applications should just specify a ``NULL`` pointer here.
+
+``length``
+    Length of the memory area to map. This must be the same value as
+    returned by the driver in the struct
+    :c:type:`v4l2_buffer` ``length`` field for the
+    single-planar API, and the same value as returned by the driver in
+    the struct :c:type:`v4l2_plane` ``length`` field for
+    the multi-planar API.
+
+``prot``
+    The ``prot`` argument describes the desired memory protection.
+    Regardless of the device type and the direction of data exchange it
+    should be set to ``PROT_READ`` | ``PROT_WRITE``, permitting read
+    and write access to image buffers. Drivers should support at least
+    this combination of flags.
+
+    .. note::
+
+      #. The Linux ``videobuf`` kernel module, which is used by some
+	 drivers supports only ``PROT_READ`` | ``PROT_WRITE``. When the
+	 driver does not support the desired protection, the
+	 :ref:`mmap() <func-mmap>` function fails.
+
+      #. Device memory accesses (e. g. the memory on a graphics card
+	 with video capturing hardware) may incur a performance penalty
+	 compared to main memory accesses, or reads may be significantly
+	 slower than writes or vice versa. Other I/O methods may be more
+	 efficient in such case.
+
+``flags``
+    The ``flags`` parameter specifies the type of the mapped object,
+    mapping options and whether modifications made to the mapped copy of
+    the page are private to the process or are to be shared with other
+    references.
+
+    ``MAP_FIXED`` requests that the driver selects no other address than
+    the one specified. If the specified address cannot be used,
+    :ref:`mmap() <func-mmap>` will fail. If ``MAP_FIXED`` is specified,
+    ``start`` must be a multiple of the pagesize. Use of this option is
+    discouraged.
+
+    One of the ``MAP_SHARED`` or ``MAP_PRIVATE`` flags must be set.
+    ``MAP_SHARED`` allows applications to share the mapped memory with
+    other (e. g. child-) processes.
+
+    .. note::
+
+       The Linux ``videobuf`` module  which is used by some
+       drivers supports only ``MAP_SHARED``. ``MAP_PRIVATE`` requests
+       copy-on-write semantics. V4L2 applications should not set the
+       ``MAP_PRIVATE``, ``MAP_DENYWRITE``, ``MAP_EXECUTABLE`` or ``MAP_ANON``
+       flags.
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``offset``
+    Offset of the buffer in device memory. This must be the same value
+    as returned by the driver in the struct
+    :c:type:`v4l2_buffer` ``m`` union ``offset`` field for
+    the single-planar API, and the same value as returned by the driver
+    in the struct :c:type:`v4l2_plane` ``m`` union
+    ``mem_offset`` field for the multi-planar API.
+
+
+Description
+===========
+
+The :ref:`mmap() <func-mmap>` function asks to map ``length`` bytes starting at
+``offset`` in the memory of the device specified by ``fd`` into the
+application address space, preferably at address ``start``. This latter
+address is a hint only, and is usually specified as 0.
+
+Suitable length and offset parameters are queried with the
+:ref:`VIDIOC_QUERYBUF` ioctl. Buffers must be
+allocated with the :ref:`VIDIOC_REQBUFS` ioctl
+before they can be queried.
+
+To unmap buffers the :ref:`munmap() <func-munmap>` function is used.
+
+
+Return Value
+============
+
+On success :ref:`mmap() <func-mmap>` returns a pointer to the mapped buffer. On
+error ``MAP_FAILED`` (-1) is returned, and the ``errno`` variable is set
+appropriately. Possible error codes are:
+
+EBADF
+    ``fd`` is not a valid file descriptor.
+
+EACCES
+    ``fd`` is not open for reading and writing.
+
+EINVAL
+    The ``start`` or ``length`` or ``offset`` are not suitable. (E. g.
+    they are too large, or not aligned on a ``PAGESIZE`` boundary.)
+
+    The ``flags`` or ``prot`` value is not supported.
+
+    No buffers have been allocated with the
+    :ref:`VIDIOC_REQBUFS` ioctl.
+
+ENOMEM
+    Not enough physical or virtual memory was available to complete the
+    request.
diff --git a/Documentation/userspace-api/media/v4l/func-munmap.rst b/Documentation/userspace-api/media/v4l/func-munmap.rst
new file mode 100644
index 000000000000..18a9941b47ab
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/func-munmap.rst
@@ -0,0 +1,65 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _func-munmap:
+
+*************
+V4L2 munmap()
+*************
+
+Name
+====
+
+v4l2-munmap - Unmap device memory
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+    #include <sys/mman.h>
+
+
+.. c:function:: int munmap( void *start, size_t length )
+    :name: v4l2-munmap
+
+Arguments
+=========
+
+``start``
+    Address of the mapped buffer as returned by the
+    :ref:`mmap() <func-mmap>` function.
+
+``length``
+    Length of the mapped buffer. This must be the same value as given to
+    :ref:`mmap() <func-mmap>` and returned by the driver in the struct
+    :c:type:`v4l2_buffer` ``length`` field for the
+    single-planar API and in the struct
+    :c:type:`v4l2_plane` ``length`` field for the
+    multi-planar API.
+
+
+Description
+===========
+
+Unmaps a previously with the :ref:`mmap() <func-mmap>` function mapped
+buffer and frees it, if possible.
+
+
+Return Value
+============
+
+On success :ref:`munmap() <func-munmap>` returns 0, on failure -1 and the
+``errno`` variable is set appropriately:
+
+EINVAL
+    The ``start`` or ``length`` is incorrect, or no buffers have been
+    mapped yet.
diff --git a/Documentation/userspace-api/media/v4l/func-open.rst b/Documentation/userspace-api/media/v4l/func-open.rst
new file mode 100644
index 000000000000..8bcdec8ab387
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/func-open.rst
@@ -0,0 +1,90 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _func-open:
+
+***********
+V4L2 open()
+***********
+
+Name
+====
+
+v4l2-open - Open a V4L2 device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <fcntl.h>
+
+
+.. c:function:: int open( const char *device_name, int flags )
+    :name: v4l2-open
+
+Arguments
+=========
+
+``device_name``
+    Device to be opened.
+
+``flags``
+    Open flags. Access mode must be ``O_RDWR``. This is just a
+    technicality, input devices still support only reading and output
+    devices only writing.
+
+    When the ``O_NONBLOCK`` flag is given, the :ref:`read() <func-read>`
+    function and the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will
+    return the ``EAGAIN`` error code when no data is available or no
+    buffer is in the driver outgoing queue, otherwise these functions
+    block until data becomes available. All V4L2 drivers exchanging data
+    with applications must support the ``O_NONBLOCK`` flag.
+
+    Other flags have no effect.
+
+
+Description
+===========
+
+To open a V4L2 device applications call :ref:`open() <func-open>` with the
+desired device name. This function has no side effects; all data format
+parameters, current input or output, control values or other properties
+remain unchanged. At the first :ref:`open() <func-open>` call after loading the
+driver they will be reset to default values, drivers are never in an
+undefined state.
+
+
+Return Value
+============
+
+On success :ref:`open() <func-open>` returns the new file descriptor. On error
+-1 is returned, and the ``errno`` variable is set appropriately.
+Possible error codes are:
+
+EACCES
+    The caller has no permission to access the device.
+
+EBUSY
+    The driver does not support multiple opens and the device is already
+    in use.
+
+ENXIO
+    No device corresponding to this device special file exists.
+
+ENOMEM
+    Not enough kernel memory was available to complete the request.
+
+EMFILE
+    The process already has the maximum number of files open.
+
+ENFILE
+    The limit on the total number of files open on the system has been
+    reached.
diff --git a/Documentation/userspace-api/media/v4l/func-poll.rst b/Documentation/userspace-api/media/v4l/func-poll.rst
new file mode 100644
index 000000000000..2c6704c1fab7
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/func-poll.rst
@@ -0,0 +1,124 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _func-poll:
+
+***********
+V4L2 poll()
+***********
+
+Name
+====
+
+v4l2-poll - Wait for some event on a file descriptor
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <sys/poll.h>
+
+
+.. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout )
+    :name: v4l2-poll
+
+Arguments
+=========
+
+
+
+Description
+===========
+
+With the :ref:`poll() <func-poll>` function applications can suspend execution
+until the driver has captured data or is ready to accept data for
+output.
+
+When streaming I/O has been negotiated this function waits until a
+buffer has been filled by the capture device and can be dequeued with
+the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. For output devices this
+function waits until the device is ready to accept a new buffer to be
+queued up with the :ref:`VIDIOC_QBUF <VIDIOC_QBUF>` ioctl for
+display. When buffers are already in the outgoing queue of the driver
+(capture) or the incoming queue isn't full (display) the function
+returns immediately.
+
+On success :ref:`poll() <func-poll>` returns the number of file descriptors
+that have been selected (that is, file descriptors for which the
+``revents`` field of the respective :c:func:`struct pollfd` structure
+is non-zero). Capture devices set the ``POLLIN`` and ``POLLRDNORM``
+flags in the ``revents`` field, output devices the ``POLLOUT`` and
+``POLLWRNORM`` flags. When the function timed out it returns a value of
+zero, on failure it returns -1 and the ``errno`` variable is set
+appropriately. When the application did not call
+:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` the :ref:`poll() <func-poll>`
+function succeeds, but sets the ``POLLERR`` flag in the ``revents``
+field. When the application has called
+:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` for a capture device but
+hasn't yet called :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, the
+:ref:`poll() <func-poll>` function succeeds and sets the ``POLLERR`` flag in
+the ``revents`` field. For output devices this same situation will cause
+:ref:`poll() <func-poll>` to succeed as well, but it sets the ``POLLOUT`` and
+``POLLWRNORM`` flags in the ``revents`` field.
+
+If an event occurred (see :ref:`VIDIOC_DQEVENT`)
+then ``POLLPRI`` will be set in the ``revents`` field and
+:ref:`poll() <func-poll>` will return.
+
+When use of the :ref:`read() <func-read>` function has been negotiated and the
+driver does not capture yet, the :ref:`poll() <func-poll>` function starts
+capturing. When that fails it returns a ``POLLERR`` as above. Otherwise
+it waits until data has been captured and can be read. When the driver
+captures continuously (as opposed to, for example, still images) the
+function may return immediately.
+
+When use of the :ref:`write() <func-write>` function has been negotiated and the
+driver does not stream yet, the :ref:`poll() <func-poll>` function starts
+streaming. When that fails it returns a ``POLLERR`` as above. Otherwise
+it waits until the driver is ready for a non-blocking
+:ref:`write() <func-write>` call.
+
+If the caller is only interested in events (just ``POLLPRI`` is set in
+the ``events`` field), then :ref:`poll() <func-poll>` will *not* start
+streaming if the driver does not stream yet. This makes it possible to
+just poll for events and not for buffers.
+
+All drivers implementing the :ref:`read() <func-read>` or :ref:`write() <func-write>`
+function or streaming I/O must also support the :ref:`poll() <func-poll>`
+function.
+
+For more details see the :ref:`poll() <func-poll>` manual page.
+
+
+Return Value
+============
+
+On success, :ref:`poll() <func-poll>` returns the number structures which have
+non-zero ``revents`` fields, or zero if the call timed out. On error -1
+is returned, and the ``errno`` variable is set appropriately:
+
+EBADF
+    One or more of the ``ufds`` members specify an invalid file
+    descriptor.
+
+EBUSY
+    The driver does not support multiple read or write streams and the
+    device is already in use.
+
+EFAULT
+    ``ufds`` references an inaccessible memory area.
+
+EINTR
+    The call was interrupted by a signal.
+
+EINVAL
+    The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use
+    ``getrlimit()`` to obtain this value.
diff --git a/Documentation/userspace-api/media/v4l/func-read.rst b/Documentation/userspace-api/media/v4l/func-read.rst
new file mode 100644
index 000000000000..1728aa5d8313
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/func-read.rst
@@ -0,0 +1,140 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _func-read:
+
+***********
+V4L2 read()
+***********
+
+Name
+====
+
+v4l2-read - Read from a V4L2 device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: ssize_t read( int fd, void *buf, size_t count )
+    :name: v4l2-read
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``buf``
+   Buffer to be filled
+
+``count``
+  Max number of bytes to read
+
+Description
+===========
+
+:ref:`read() <func-read>` attempts to read up to ``count`` bytes from file
+descriptor ``fd`` into the buffer starting at ``buf``. The layout of the
+data in the buffer is discussed in the respective device interface
+section, see ##. If ``count`` is zero, :ref:`read() <func-read>` returns zero
+and has no other results. If ``count`` is greater than ``SSIZE_MAX``,
+the result is unspecified. Regardless of the ``count`` value each
+:ref:`read() <func-read>` call will provide at most one frame (two fields)
+worth of data.
+
+By default :ref:`read() <func-read>` blocks until data becomes available. When
+the ``O_NONBLOCK`` flag was given to the :ref:`open() <func-open>`
+function it returns immediately with an ``EAGAIN`` error code when no data
+is available. The :ref:`select() <func-select>` or
+:ref:`poll() <func-poll>` functions can always be used to suspend
+execution until data becomes available. All drivers supporting the
+:ref:`read() <func-read>` function must also support :ref:`select() <func-select>` and
+:ref:`poll() <func-poll>`.
+
+Drivers can implement read functionality in different ways, using a
+single or multiple buffers and discarding the oldest or newest frames
+once the internal buffers are filled.
+
+:ref:`read() <func-read>` never returns a "snapshot" of a buffer being filled.
+Using a single buffer the driver will stop capturing when the
+application starts reading the buffer until the read is finished. Thus
+only the period of the vertical blanking interval is available for
+reading, or the capture rate must fall below the nominal frame rate of
+the video standard.
+
+The behavior of :ref:`read() <func-read>` when called during the active picture
+period or the vertical blanking separating the top and bottom field
+depends on the discarding policy. A driver discarding the oldest frames
+keeps capturing into an internal buffer, continuously overwriting the
+previously, not read frame, and returns the frame being received at the
+time of the :ref:`read() <func-read>` call as soon as it is complete.
+
+A driver discarding the newest frames stops capturing until the next
+:ref:`read() <func-read>` call. The frame being received at :ref:`read() <func-read>`
+time is discarded, returning the following frame instead. Again this
+implies a reduction of the capture rate to one half or less of the
+nominal frame rate. An example of this model is the video read mode of
+the bttv driver, initiating a DMA to user memory when :ref:`read() <func-read>`
+is called and returning when the DMA finished.
+
+In the multiple buffer model drivers maintain a ring of internal
+buffers, automatically advancing to the next free buffer. This allows
+continuous capturing when the application can empty the buffers fast
+enough. Again, the behavior when the driver runs out of free buffers
+depends on the discarding policy.
+
+Applications can get and set the number of buffers used internally by
+the driver with the :ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and
+:ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` ioctls. They are optional,
+however. The discarding policy is not reported and cannot be changed.
+For minimum requirements see :ref:`devices`.
+
+
+Return Value
+============
+
+On success, the number of bytes read is returned. It is not an error if
+this number is smaller than the number of bytes requested, or the amount
+of data required for one frame. This may happen for example because
+:ref:`read() <func-read>` was interrupted by a signal. On error, -1 is
+returned, and the ``errno`` variable is set appropriately. In this case
+the next read will start at the beginning of a new frame. Possible error
+codes are:
+
+EAGAIN
+    Non-blocking I/O has been selected using O_NONBLOCK and no data was
+    immediately available for reading.
+
+EBADF
+    ``fd`` is not a valid file descriptor or is not open for reading, or
+    the process already has the maximum number of files open.
+
+EBUSY
+    The driver does not support multiple read streams and the device is
+    already in use.
+
+EFAULT
+    ``buf`` references an inaccessible memory area.
+
+EINTR
+    The call was interrupted by a signal before any data was read.
+
+EIO
+    I/O error. This indicates some hardware problem or a failure to
+    communicate with a remote device (USB camera etc.).
+
+EINVAL
+    The :ref:`read() <func-read>` function is not supported by this driver, not
+    on this device, or generally not on this type of device.
diff --git a/Documentation/userspace-api/media/v4l/func-select.rst b/Documentation/userspace-api/media/v4l/func-select.rst
new file mode 100644
index 000000000000..6aca8a290c1f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/func-select.rst
@@ -0,0 +1,127 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _func-select:
+
+*************
+V4L2 select()
+*************
+
+Name
+====
+
+v4l2-select - Synchronous I/O multiplexing
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <sys/time.h>
+    #include <sys/types.h>
+    #include <unistd.h>
+
+
+.. c:function:: int select( int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout )
+    :name: v4l2-select
+
+Arguments
+=========
+
+``nfds``
+  The highest-numbered file descriptor in any of the three sets, plus 1.
+
+``readfds``
+  File descriptions to be watched if a read() call won't block.
+
+``writefds``
+  File descriptions to be watched if a write() won't block.
+
+``exceptfds``
+  File descriptions to be watched for V4L2 events.
+
+``timeout``
+  Maximum time to wait.
+
+
+Description
+===========
+
+With the :ref:`select() <func-select>` function applications can suspend
+execution until the driver has captured data or is ready to accept data
+for output.
+
+When streaming I/O has been negotiated this function waits until a
+buffer has been filled or displayed and can be dequeued with the
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. When buffers are already in
+the outgoing queue of the driver the function returns immediately.
+
+On success :ref:`select() <func-select>` returns the total number of bits set in
+:c:func:`struct fd_set`. When the function timed out it returns
+a value of zero. On failure it returns -1 and the ``errno`` variable is
+set appropriately. When the application did not call
+:ref:`VIDIOC_QBUF` or
+:ref:`VIDIOC_STREAMON` yet the :ref:`select() <func-select>`
+function succeeds, setting the bit of the file descriptor in ``readfds``
+or ``writefds``, but subsequent :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`
+calls will fail. [#f1]_
+
+When use of the :ref:`read() <func-read>` function has been negotiated and the
+driver does not capture yet, the :ref:`select() <func-select>` function starts
+capturing. When that fails, :ref:`select() <func-select>` returns successful and
+a subsequent :ref:`read() <func-read>` call, which also attempts to start
+capturing, will return an appropriate error code. When the driver
+captures continuously (as opposed to, for example, still images) and
+data is already available the :ref:`select() <func-select>` function returns
+immediately.
+
+When use of the :ref:`write() <func-write>` function has been negotiated the
+:ref:`select() <func-select>` function just waits until the driver is ready for a
+non-blocking :ref:`write() <func-write>` call.
+
+All drivers implementing the :ref:`read() <func-read>` or :ref:`write() <func-write>`
+function or streaming I/O must also support the :ref:`select() <func-select>`
+function.
+
+For more details see the :ref:`select() <func-select>` manual page.
+
+
+Return Value
+============
+
+On success, :ref:`select() <func-select>` returns the number of descriptors
+contained in the three returned descriptor sets, which will be zero if
+the timeout expired. On error -1 is returned, and the ``errno`` variable
+is set appropriately; the sets and ``timeout`` are undefined. Possible
+error codes are:
+
+EBADF
+    One or more of the file descriptor sets specified a file descriptor
+    that is not open.
+
+EBUSY
+    The driver does not support multiple read or write streams and the
+    device is already in use.
+
+EFAULT
+    The ``readfds``, ``writefds``, ``exceptfds`` or ``timeout`` pointer
+    references an inaccessible memory area.
+
+EINTR
+    The call was interrupted by a signal.
+
+EINVAL
+    The ``nfds`` argument is less than zero or greater than
+    ``FD_SETSIZE``.
+
+.. [#f1]
+   The Linux kernel implements :ref:`select() <func-select>` like the
+   :ref:`poll() <func-poll>` function, but :ref:`select() <func-select>` cannot
+   return a ``POLLERR``.
diff --git a/Documentation/userspace-api/media/v4l/func-write.rst b/Documentation/userspace-api/media/v4l/func-write.rst
new file mode 100644
index 000000000000..fb1955f70f0f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/func-write.rst
@@ -0,0 +1,91 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _func-write:
+
+************
+V4L2 write()
+************
+
+Name
+====
+
+v4l2-write - Write to a V4L2 device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: ssize_t write( int fd, void *buf, size_t count )
+    :name: v4l2-write
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``buf``
+     Buffer with data to be written
+
+``count``
+    Number of bytes at the buffer
+
+Description
+===========
+
+:ref:`write() <func-write>` writes up to ``count`` bytes to the device
+referenced by the file descriptor ``fd`` from the buffer starting at
+``buf``. When the hardware outputs are not active yet, this function
+enables them. When ``count`` is zero, :ref:`write() <func-write>` returns 0
+without any other effect.
+
+When the application does not provide more data in time, the previous
+video frame, raw VBI image, sliced VPS or WSS data is displayed again.
+Sliced Teletext or Closed Caption data is not repeated, the driver
+inserts a blank line instead.
+
+
+Return Value
+============
+
+On success, the number of bytes written are returned. Zero indicates
+nothing was written. On error, -1 is returned, and the ``errno``
+variable is set appropriately. In this case the next write will start at
+the beginning of a new frame. Possible error codes are:
+
+EAGAIN
+    Non-blocking I/O has been selected using the
+    :ref:`O_NONBLOCK <func-open>` flag and no buffer space was
+    available to write the data immediately.
+
+EBADF
+    ``fd`` is not a valid file descriptor or is not open for writing.
+
+EBUSY
+    The driver does not support multiple write streams and the device is
+    already in use.
+
+EFAULT
+    ``buf`` references an inaccessible memory area.
+
+EINTR
+    The call was interrupted by a signal before any data was written.
+
+EIO
+    I/O error. This indicates some hardware problem.
+
+EINVAL
+    The :ref:`write() <func-write>` function is not supported by this driver,
+    not on this device, or generally not on this type of device.
diff --git a/Documentation/userspace-api/media/v4l/hist-v4l2.rst b/Documentation/userspace-api/media/v4l/hist-v4l2.rst
new file mode 100644
index 000000000000..7913d017cd33
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/hist-v4l2.rst
@@ -0,0 +1,1374 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _hist-v4l2:
+
+***********************
+Changes of the V4L2 API
+***********************
+
+Soon after the V4L API was added to the kernel it was criticised as too
+inflexible. In August 1998 Bill Dirks proposed a number of improvements
+and began to work on documentation, example drivers and applications.
+With the help of other volunteers this eventually became the V4L2 API,
+not just an extension but a replacement for the V4L API. However it took
+another four years and two stable kernel releases until the new API was
+finally accepted for inclusion into the kernel in its present form.
+
+
+Early Versions
+==============
+
+1998-08-20: First version.
+
+1998-08-27: The :ref:`select() <func-select>` function was introduced.
+
+1998-09-10: New video standard interface.
+
+1998-09-18: The ``VIDIOC_NONCAP`` ioctl was replaced by the otherwise
+meaningless ``O_TRUNC`` :ref:`open() <func-open>` flag, and the
+aliases ``O_NONCAP`` and ``O_NOIO`` were defined. Applications can set
+this flag if they intend to access controls only, as opposed to capture
+applications which need exclusive access. The ``VIDEO_STD_XXX``
+identifiers are now ordinals instead of flags, and the
+``video_std_construct()`` helper function takes id and
+transmission arguments.
+
+1998-09-28: Revamped video standard. Made video controls individually
+enumerable.
+
+1998-10-02: The ``id`` field was removed from struct
+struct ``video_standard`` and the color subcarrier fields were
+renamed. The :ref:`VIDIOC_QUERYSTD` ioctl was
+renamed to :ref:`VIDIOC_ENUMSTD`,
+:ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` to
+:ref:`VIDIOC_ENUMINPUT`. A first draft of the
+Codec API was released.
+
+1998-11-08: Many minor changes. Most symbols have been renamed. Some
+material changes to struct :c:type:`v4l2_capability`.
+
+1998-11-12: The read/write directon of some ioctls was misdefined.
+
+1998-11-14: ``V4L2_PIX_FMT_RGB24`` changed to ``V4L2_PIX_FMT_BGR24``,
+and ``V4L2_PIX_FMT_RGB32`` changed to ``V4L2_PIX_FMT_BGR32``. Audio
+controls are now accessible with the
+:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
+:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls under names starting
+with ``V4L2_CID_AUDIO``. The ``V4L2_MAJOR`` define was removed from
+``videodev.h`` since it was only used once in the ``videodev`` kernel
+module. The ``YUV422`` and ``YUV411`` planar image formats were added.
+
+1998-11-28: A few ioctl symbols changed. Interfaces for codecs and video
+output devices were added.
+
+1999-01-14: A raw VBI capture interface was added.
+
+1999-01-19: The ``VIDIOC_NEXTBUF`` ioctl was removed.
+
+
+V4L2 Version 0.16 1999-01-31
+============================
+
+1999-01-27: There is now one QBUF ioctl, VIDIOC_QWBUF and VIDIOC_QRBUF
+are gone. VIDIOC_QBUF takes a v4l2_buffer as a parameter. Added
+digital zoom (cropping) controls.
+
+
+V4L2 Version 0.18 1999-03-16
+============================
+
+Added a v4l to V4L2 ioctl compatibility layer to videodev.c. Driver
+writers, this changes how you implement your ioctl handler. See the
+Driver Writer's Guide. Added some more control id codes.
+
+
+V4L2 Version 0.19 1999-06-05
+============================
+
+1999-03-18: Fill in the category and catname fields of v4l2_queryctrl
+objects before passing them to the driver. Required a minor change to
+the VIDIOC_QUERYCTRL handlers in the sample drivers.
+
+1999-03-31: Better compatibility for v4l memory capture ioctls. Requires
+changes to drivers to fully support new compatibility features, see
+Driver Writer's Guide and v4l2cap.c. Added new control IDs:
+V4L2_CID_HFLIP, _VFLIP. Changed V4L2_PIX_FMT_YUV422P to _YUV422P,
+and _YUV411P to _YUV411P.
+
+1999-04-04: Added a few more control IDs.
+
+1999-04-07: Added the button control type.
+
+1999-05-02: Fixed a typo in videodev.h, and added the
+V4L2_CTRL_FLAG_GRAYED (later V4L2_CTRL_FLAG_GRABBED) flag.
+
+1999-05-20: Definition of VIDIOC_G_CTRL was wrong causing a
+malfunction of this ioctl.
+
+1999-06-05: Changed the value of V4L2_CID_WHITENESS.
+
+
+V4L2 Version 0.20 (1999-09-10)
+==============================
+
+Version 0.20 introduced a number of changes which were *not backward
+compatible* with 0.19 and earlier versions. Purpose of these changes was
+to simplify the API, while making it more extensible and following
+common Linux driver API conventions.
+
+1. Some typos in ``V4L2_FMT_FLAG`` symbols were fixed. struct
+   :c:type:`v4l2_clip` was changed for compatibility with
+   v4l. (1999-08-30)
+
+2. ``V4L2_TUNER_SUB_LANG1`` was added. (1999-09-05)
+
+3. All ioctl() commands that used an integer argument now take a pointer
+   to an integer. Where it makes sense, ioctls will return the actual
+   new value in the integer pointed to by the argument, a common
+   convention in the V4L2 API. The affected ioctls are: VIDIOC_PREVIEW,
+   VIDIOC_STREAMON, VIDIOC_STREAMOFF, VIDIOC_S_FREQ,
+   VIDIOC_S_INPUT, VIDIOC_S_OUTPUT, VIDIOC_S_EFFECT. For example
+
+
+   .. code-block:: c
+
+       err = ioctl (fd, VIDIOC_XXX, V4L2_XXX);
+
+   becomes
+
+
+   .. code-block:: c
+
+       int a = V4L2_XXX; err = ioctl(fd, VIDIOC_XXX, &a);
+
+4. All the different get- and set-format commands were swept into one
+   :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
+   :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl taking a union and a
+   type field selecting the union member as parameter. Purpose is to
+   simplify the API by eliminating several ioctls and to allow new and
+   driver private data streams without adding new ioctls.
+
+   This change obsoletes the following ioctls: ``VIDIOC_S_INFMT``,
+   ``VIDIOC_G_INFMT``, ``VIDIOC_S_OUTFMT``, ``VIDIOC_G_OUTFMT``,
+   ``VIDIOC_S_VBIFMT`` and ``VIDIOC_G_VBIFMT``. The image format
+   structure struct :c:type:`v4l2_format` was renamed to struct
+   :c:type:`v4l2_pix_format`, while struct
+   :c:type:`v4l2_format` is now the envelopping structure
+   for all format negotiations.
+
+5. Similar to the changes above, the ``VIDIOC_G_PARM`` and
+   ``VIDIOC_S_PARM`` ioctls were merged with ``VIDIOC_G_OUTPARM`` and
+   ``VIDIOC_S_OUTPARM``. A ``type`` field in the new struct
+   :c:type:`v4l2_streamparm` selects the respective
+   union member.
+
+   This change obsoletes the ``VIDIOC_G_OUTPARM`` and
+   ``VIDIOC_S_OUTPARM`` ioctls.
+
+6. Control enumeration was simplified, and two new control flags were
+   introduced and one dropped. The ``catname`` field was replaced by a
+   ``group`` field.
+
+   Drivers can now flag unsupported and temporarily unavailable controls
+   with ``V4L2_CTRL_FLAG_DISABLED`` and ``V4L2_CTRL_FLAG_GRABBED``
+   respectively. The ``group`` name indicates a possibly narrower
+   classification than the ``category``. In other words, there may be
+   multiple groups within a category. Controls within a group would
+   typically be drawn within a group box. Controls in different
+   categories might have a greater separation, or may even appear in
+   separate windows.
+
+7. The struct :c:type:`v4l2_buffer` ``timestamp`` was
+   changed to a 64 bit integer, containing the sampling or output time
+   of the frame in nanoseconds. Additionally timestamps will be in
+   absolute system time, not starting from zero at the beginning of a
+   stream. The data type name for timestamps is stamp_t, defined as a
+   signed 64-bit integer. Output devices should not send a buffer out
+   until the time in the timestamp field has arrived. I would like to
+   follow SGI's lead, and adopt a multimedia timestamping system like
+   their UST (Unadjusted System Time). See
+   http://web.archive.org/web/\*/http://reality.sgi.com
+   /cpirazzi_engr/lg/time/intro.html. UST uses timestamps that are
+   64-bit signed integers (not struct timeval's) and given in nanosecond
+   units. The UST clock starts at zero when the system is booted and
+   runs continuously and uniformly. It takes a little over 292 years for
+   UST to overflow. There is no way to set the UST clock. The regular
+   Linux time-of-day clock can be changed periodically, which would
+   cause errors if it were being used for timestamping a multimedia
+   stream. A real UST style clock will require some support in the
+   kernel that is not there yet. But in anticipation, I will change the
+   timestamp field to a 64-bit integer, and I will change the
+   v4l2_masterclock_gettime() function (used only by drivers) to
+   return a 64-bit integer.
+
+8. A ``sequence`` field was added to struct
+   :c:type:`v4l2_buffer`. The ``sequence`` field counts
+   captured frames, it is ignored by output devices. When a capture
+   driver drops a frame, the sequence number of that frame is skipped.
+
+
+V4L2 Version 0.20 incremental changes
+=====================================
+
+1999-12-23: In struct :c:type:`v4l2_vbi_format` the
+``reserved1`` field became ``offset``. Previously drivers were required
+to clear the ``reserved1`` field.
+
+2000-01-13: The ``V4L2_FMT_FLAG_NOT_INTERLACED`` flag was added.
+
+2000-07-31: The ``linux/poll.h`` header is now included by
+``videodev.h`` for compatibility with the original ``videodev.h`` file.
+
+2000-11-20: ``V4L2_TYPE_VBI_OUTPUT`` and ``V4L2_PIX_FMT_Y41P`` were
+added.
+
+2000-11-25: ``V4L2_TYPE_VBI_INPUT`` was added.
+
+2000-12-04: A couple typos in symbol names were fixed.
+
+2001-01-18: To avoid namespace conflicts the ``fourcc`` macro defined in
+the ``videodev.h`` header file was renamed to ``v4l2_fourcc``.
+
+2001-01-25: A possible driver-level compatibility problem between the
+``videodev.h`` file in Linux 2.4.0 and the ``videodev.h`` file included
+in the ``videodevX`` patch was fixed. Users of an earlier version of
+``videodevX`` on Linux 2.4.0 should recompile their V4L and V4L2
+drivers.
+
+2001-01-26: A possible kernel-level incompatibility between the
+``videodev.h`` file in the ``videodevX`` patch and the ``videodev.h``
+file in Linux 2.2.x with devfs patches applied was fixed.
+
+2001-03-02: Certain V4L ioctls which pass data in both direction
+although they are defined with read-only parameter, did not work
+correctly through the backward compatibility layer. [Solution?]
+
+2001-04-13: Big endian 16-bit RGB formats were added.
+
+2001-09-17: New YUV formats and the
+:ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` and
+:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctls were added.
+(The old ``VIDIOC_G_FREQ`` and ``VIDIOC_S_FREQ`` ioctls did not take
+multiple tuners into account.)
+
+2000-09-18: ``V4L2_BUF_TYPE_VBI`` was added. This may *break
+compatibility* as the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctls may fail now if the struct
+struct ``v4l2_fmt`` ``type`` field does not contain
+``V4L2_BUF_TYPE_VBI``. In the documentation of the struct
+:c:type:`v4l2_vbi_format` ``offset`` field the
+ambiguous phrase "rising edge" was changed to "leading edge".
+
+
+V4L2 Version 0.20 2000-11-23
+============================
+
+A number of changes were made to the raw VBI interface.
+
+1. Figures clarifying the line numbering scheme were added to the V4L2
+   API specification. The ``start``\ [0] and ``start``\ [1] fields no
+   longer count line numbers beginning at zero. Rationale: a) The
+   previous definition was unclear. b) The ``start``\ [] values are
+   ordinal numbers. c) There is no point in inventing a new line
+   numbering scheme. We now use line number as defined by ITU-R, period.
+   Compatibility: Add one to the start values. Applications depending on
+   the previous semantics may not function correctly.
+
+2. The restriction "count[0] > 0 and count[1] > 0" has been relaxed to
+   "(count[0] + count[1]) > 0". Rationale: Drivers may allocate
+   resources at scan line granularity and some data services are
+   transmitted only on the first field. The comment that both ``count``
+   values will usually be equal is misleading and pointless and has been
+   removed. This change *breaks compatibility* with earlier versions:
+   Drivers may return ``EINVAL``, applications may not function correctly.
+
+3. Drivers are again permitted to return negative (unknown) start values
+   as proposed earlier. Why this feature was dropped is unclear. This
+   change may *break compatibility* with applications depending on the
+   start values being positive. The use of ``EBUSY`` and ``EINVAL``
+   error codes with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl was
+   clarified. The ``EBUSY`` error code was finally documented, and the
+   ``reserved2`` field which was previously mentioned only in the
+   ``videodev.h`` header file.
+
+4. New buffer types ``V4L2_TYPE_VBI_INPUT`` and ``V4L2_TYPE_VBI_OUTPUT``
+   were added. The former is an alias for the old ``V4L2_TYPE_VBI``, the
+   latter was missing in the ``videodev.h`` file.
+
+
+V4L2 Version 0.20 2002-07-25
+============================
+
+Added sliced VBI interface proposal.
+
+
+V4L2 in Linux 2.5.46, 2002-10
+=============================
+
+Around October-November 2002, prior to an announced feature freeze of
+Linux 2.5, the API was revised, drawing from experience with V4L2 0.20.
+This unnamed version was finally merged into Linux 2.5.46.
+
+1.  As specified in :ref:`related`, drivers must make related device
+    functions available under all minor device numbers.
+
+2.  The :ref:`open() <func-open>` function requires access mode
+    ``O_RDWR`` regardless of the device type. All V4L2 drivers
+    exchanging data with applications must support the ``O_NONBLOCK``
+    flag. The ``O_NOIO`` flag, a V4L2 symbol which aliased the
+    meaningless ``O_TRUNC`` to indicate accesses without data exchange
+    (panel applications) was dropped. Drivers must stay in "panel mode"
+    until the application attempts to initiate a data exchange, see
+    :ref:`open`.
+
+3.  The struct :c:type:`v4l2_capability` changed
+    dramatically. Note that also the size of the structure changed,
+    which is encoded in the ioctl request code, thus older V4L2 devices
+    will respond with an ``EINVAL`` error code to the new
+    :ref:`VIDIOC_QUERYCAP` ioctl.
+
+    There are new fields to identify the driver, a new RDS device
+    function ``V4L2_CAP_RDS_CAPTURE``, the ``V4L2_CAP_AUDIO`` flag
+    indicates if the device has any audio connectors, another I/O
+    capability ``V4L2_CAP_ASYNCIO`` can be flagged. In response to these
+    changes the ``type`` field became a bit set and was merged into the
+    ``flags`` field. ``V4L2_FLAG_TUNER`` was renamed to
+    ``V4L2_CAP_TUNER``, ``V4L2_CAP_VIDEO_OVERLAY`` replaced
+    ``V4L2_FLAG_PREVIEW`` and ``V4L2_CAP_VBI_CAPTURE`` and
+    ``V4L2_CAP_VBI_OUTPUT`` replaced ``V4L2_FLAG_DATA_SERVICE``.
+    ``V4L2_FLAG_READ`` and ``V4L2_FLAG_WRITE`` were merged into
+    ``V4L2_CAP_READWRITE``.
+
+    The redundant fields ``inputs``, ``outputs`` and ``audios`` were
+    removed. These properties can be determined as described in
+    :ref:`video` and :ref:`audio`.
+
+    The somewhat volatile and therefore barely useful fields
+    ``maxwidth``, ``maxheight``, ``minwidth``, ``minheight``,
+    ``maxframerate`` were removed. This information is available as
+    described in :ref:`format` and :ref:`standard`.
+
+    ``V4L2_FLAG_SELECT`` was removed. We believe the select() function
+    is important enough to require support of it in all V4L2 drivers
+    exchanging data with applications. The redundant
+    ``V4L2_FLAG_MONOCHROME`` flag was removed, this information is
+    available as described in :ref:`format`.
+
+4.  In struct :c:type:`v4l2_input` the ``assoc_audio``
+    field and the ``capability`` field and its only flag
+    ``V4L2_INPUT_CAP_AUDIO`` was replaced by the new ``audioset`` field.
+    Instead of linking one video input to one audio input this field
+    reports all audio inputs this video input combines with.
+
+    New fields are ``tuner`` (reversing the former link from tuners to
+    video inputs), ``std`` and ``status``.
+
+    Accordingly struct :c:type:`v4l2_output` lost its
+    ``capability`` and ``assoc_audio`` fields. ``audioset``,
+    ``modulator`` and ``std`` where added instead.
+
+5.  The struct :c:type:`v4l2_audio` field ``audio`` was
+    renamed to ``index``, for consistency with other structures. A new
+    capability flag ``V4L2_AUDCAP_STEREO`` was added to indicated if the
+    audio input in question supports stereo sound.
+    ``V4L2_AUDCAP_EFFECTS`` and the corresponding ``V4L2_AUDMODE`` flags
+    where removed. This can be easily implemented using controls.
+    (However the same applies to AVL which is still there.)
+
+    Again for consistency the struct
+    :c:type:`v4l2_audioout` field ``audio`` was renamed
+    to ``index``.
+
+6.  The struct :c:type:`v4l2_tuner` ``input`` field was
+    replaced by an ``index`` field, permitting devices with multiple
+    tuners. The link between video inputs and tuners is now reversed,
+    inputs point to their tuner. The ``std`` substructure became a
+    simple set (more about this below) and moved into struct
+    :c:type:`v4l2_input`. A ``type`` field was added.
+
+    Accordingly in struct :c:type:`v4l2_modulator` the
+    ``output`` was replaced by an ``index`` field.
+
+    In struct :c:type:`v4l2_frequency` the ``port``
+    field was replaced by a ``tuner`` field containing the respective
+    tuner or modulator index number. A tuner ``type`` field was added
+    and the ``reserved`` field became larger for future extensions
+    (satellite tuners in particular).
+
+7.  The idea of completely transparent video standards was dropped.
+    Experience showed that applications must be able to work with video
+    standards beyond presenting the user a menu. Instead of enumerating
+    supported standards with an ioctl applications can now refer to
+    standards by :ref:`v4l2_std_id <v4l2-std-id>` and symbols
+    defined in the ``videodev2.h`` header file. For details see
+    :ref:`standard`. The :ref:`VIDIOC_G_STD <VIDIOC_G_STD>` and
+    :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` now take a pointer to this
+    type as argument. :ref:`VIDIOC_QUERYSTD` was
+    added to autodetect the received standard, if the hardware has this
+    capability. In struct :c:type:`v4l2_standard` an
+    ``index`` field was added for
+    :ref:`VIDIOC_ENUMSTD`. A
+    :ref:`v4l2_std_id <v4l2-std-id>` field named ``id`` was added as
+    machine readable identifier, also replacing the ``transmission``
+    field. The misleading ``framerate`` field was renamed to
+    ``frameperiod``. The now obsolete ``colorstandard`` information,
+    originally needed to distguish between variations of standards, were
+    removed.
+
+    Struct ``v4l2_enumstd`` ceased to be.
+    :ref:`VIDIOC_ENUMSTD` now takes a pointer to a
+    struct :c:type:`v4l2_standard` directly. The
+    information which standards are supported by a particular video
+    input or output moved into struct :c:type:`v4l2_input`
+    and struct :c:type:`v4l2_output` fields named ``std``,
+    respectively.
+
+8.  The struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` fields
+    ``category`` and ``group`` did not catch on and/or were not
+    implemented as expected and therefore removed.
+
+9.  The :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl was added to
+    negotiate data formats as with
+    :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`, but without the overhead of
+    programming the hardware and regardless of I/O in progress.
+
+    In struct :c:type:`v4l2_format` the ``fmt`` union was
+    extended to contain struct :c:type:`v4l2_window`. All
+    image format negotiations are now possible with ``VIDIOC_G_FMT``,
+    ``VIDIOC_S_FMT`` and ``VIDIOC_TRY_FMT``; ioctl. The ``VIDIOC_G_WIN``
+    and ``VIDIOC_S_WIN`` ioctls to prepare for a video overlay were
+    removed. The ``type`` field changed to type enum
+    :c:type:`v4l2_buf_type` and the buffer type names
+    changed as follows.
+
+
+
+    .. flat-table::
+	:header-rows:  1
+	:stub-columns: 0
+
+	* - Old defines
+	  - enum :c:type:`v4l2_buf_type`
+	* - ``V4L2_BUF_TYPE_CAPTURE``
+	  - ``V4L2_BUF_TYPE_VIDEO_CAPTURE``
+	* - ``V4L2_BUF_TYPE_CODECIN``
+	  - Omitted for now
+	* - ``V4L2_BUF_TYPE_CODECOUT``
+	  - Omitted for now
+	* - ``V4L2_BUF_TYPE_EFFECTSIN``
+	  - Omitted for now
+	* - ``V4L2_BUF_TYPE_EFFECTSIN2``
+	  - Omitted for now
+	* - ``V4L2_BUF_TYPE_EFFECTSOUT``
+	  - Omitted for now
+	* - ``V4L2_BUF_TYPE_VIDEOOUT``
+	  - ``V4L2_BUF_TYPE_VIDEO_OUTPUT``
+	* - ``-``
+	  - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``
+	* - ``-``
+	  - ``V4L2_BUF_TYPE_VBI_CAPTURE``
+	* - ``-``
+	  - ``V4L2_BUF_TYPE_VBI_OUTPUT``
+	* - ``-``
+	  - ``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE``
+	* - ``-``
+	  - ``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``
+	* - ``V4L2_BUF_TYPE_PRIVATE_BASE``
+	  - ``V4L2_BUF_TYPE_PRIVATE`` (but this is deprecated)
+
+
+10. In struct :c:type:`v4l2_fmtdesc` a enum
+    :c:type:`v4l2_buf_type` field named ``type`` was
+    added as in struct :c:type:`v4l2_format`. The
+    ``VIDIOC_ENUM_FBUFFMT`` ioctl is no longer needed and was removed.
+    These calls can be replaced by
+    :ref:`VIDIOC_ENUM_FMT` with type
+    ``V4L2_BUF_TYPE_VIDEO_OVERLAY``.
+
+11. In struct :c:type:`v4l2_pix_format` the ``depth``
+    field was removed, assuming applications which recognize the format
+    by its four-character-code already know the color depth, and others
+    do not care about it. The same rationale lead to the removal of the
+    ``V4L2_FMT_FLAG_COMPRESSED`` flag. The
+    ``V4L2_FMT_FLAG_SWCONVECOMPRESSED`` flag was removed because drivers
+    are not supposed to convert images in kernel space. A user library
+    of conversion functions should be provided instead. The
+    ``V4L2_FMT_FLAG_BYTESPERLINE`` flag was redundant. Applications can
+    set the ``bytesperline`` field to zero to get a reasonable default.
+    Since the remaining flags were replaced as well, the ``flags`` field
+    itself was removed.
+
+    The interlace flags were replaced by a enum
+    :c:type:`v4l2_field` value in a newly added ``field``
+    field.
+
+
+
+    .. flat-table::
+	:header-rows:  1
+	:stub-columns: 0
+
+	* - Old flag
+	  - enum :c:type:`v4l2_field`
+	* - ``V4L2_FMT_FLAG_NOT_INTERLACED``
+	  - ?
+	* - ``V4L2_FMT_FLAG_INTERLACED`` = ``V4L2_FMT_FLAG_COMBINED``
+	  - ``V4L2_FIELD_INTERLACED``
+	* - ``V4L2_FMT_FLAG_TOPFIELD`` = ``V4L2_FMT_FLAG_ODDFIELD``
+	  - ``V4L2_FIELD_TOP``
+	* - ``V4L2_FMT_FLAG_BOTFIELD`` = ``V4L2_FMT_FLAG_EVENFIELD``
+	  - ``V4L2_FIELD_BOTTOM``
+	* - ``-``
+	  - ``V4L2_FIELD_SEQ_TB``
+	* - ``-``
+	  - ``V4L2_FIELD_SEQ_BT``
+	* - ``-``
+	  - ``V4L2_FIELD_ALTERNATE``
+
+
+    The color space flags were replaced by a enum
+    :c:type:`v4l2_colorspace` value in a newly added
+    ``colorspace`` field, where one of ``V4L2_COLORSPACE_SMPTE170M``,
+    ``V4L2_COLORSPACE_BT878``, ``V4L2_COLORSPACE_470_SYSTEM_M`` or
+    ``V4L2_COLORSPACE_470_SYSTEM_BG`` replaces ``V4L2_FMT_CS_601YUV``.
+
+12. In struct :c:type:`v4l2_requestbuffers` the
+    ``type`` field was properly defined as enum
+    :c:type:`v4l2_buf_type`. Buffer types changed as
+    mentioned above. A new ``memory`` field of type enum
+    :c:type:`v4l2_memory` was added to distinguish between
+    I/O methods using buffers allocated by the driver or the
+    application. See :ref:`io` for details.
+
+13. In struct :c:type:`v4l2_buffer` the ``type`` field was
+    properly defined as enum :c:type:`v4l2_buf_type`.
+    Buffer types changed as mentioned above. A ``field`` field of type
+    enum :c:type:`v4l2_field` was added to indicate if a
+    buffer contains a top or bottom field. The old field flags were
+    removed. Since no unadjusted system time clock was added to the
+    kernel as planned, the ``timestamp`` field changed back from type
+    stamp_t, an unsigned 64 bit integer expressing the sample time in
+    nanoseconds, to struct :c:type:`timeval`. With the addition
+    of a second memory mapping method the ``offset`` field moved into
+    union ``m``, and a new ``memory`` field of type enum
+    :c:type:`v4l2_memory` was added to distinguish between
+    I/O methods. See :ref:`io` for details.
+
+    The ``V4L2_BUF_REQ_CONTIG`` flag was used by the V4L compatibility
+    layer, after changes to this code it was no longer needed. The
+    ``V4L2_BUF_ATTR_DEVICEMEM`` flag would indicate if the buffer was
+    indeed allocated in device memory rather than DMA-able system
+    memory. It was barely useful and so was removed.
+
+14. In struct :c:type:`v4l2_framebuffer` the
+    ``base[3]`` array anticipating double- and triple-buffering in
+    off-screen video memory, however without defining a synchronization
+    mechanism, was replaced by a single pointer. The
+    ``V4L2_FBUF_CAP_SCALEUP`` and ``V4L2_FBUF_CAP_SCALEDOWN`` flags were
+    removed. Applications can determine this capability more accurately
+    using the new cropping and scaling interface. The
+    ``V4L2_FBUF_CAP_CLIPPING`` flag was replaced by
+    ``V4L2_FBUF_CAP_LIST_CLIPPING`` and
+    ``V4L2_FBUF_CAP_BITMAP_CLIPPING``.
+
+15. In struct :c:type:`v4l2_clip` the ``x``, ``y``,
+    ``width`` and ``height`` field moved into a ``c`` substructure of
+    type struct :c:type:`v4l2_rect`. The ``x`` and ``y``
+    fields were renamed to ``left`` and ``top``, i. e. offsets to a
+    context dependent origin.
+
+16. In struct :c:type:`v4l2_window` the ``x``, ``y``,
+    ``width`` and ``height`` field moved into a ``w`` substructure as
+    above. A ``field`` field of type :c:type:`v4l2_field` was added to
+    distinguish between field and frame (interlaced) overlay.
+
+17. The digital zoom interface, including struct
+    struct ``v4l2_zoomcap``, struct
+    struct ``v4l2_zoom``, ``V4L2_ZOOM_NONCAP`` and
+    ``V4L2_ZOOM_WHILESTREAMING`` was replaced by a new cropping and
+    scaling interface. The previously unused struct
+    struct :c:type:`v4l2_cropcap` and struct :c:type:`v4l2_crop`
+    where redefined for this purpose. See :ref:`crop` for details.
+
+18. In struct :c:type:`v4l2_vbi_format` the
+    ``SAMPLE_FORMAT`` field now contains a four-character-code as used
+    to identify video image formats and ``V4L2_PIX_FMT_GREY`` replaces
+    the ``V4L2_VBI_SF_UBYTE`` define. The ``reserved`` field was
+    extended.
+
+19. In struct :c:type:`v4l2_captureparm` the type of
+    the ``timeperframe`` field changed from unsigned long to struct
+    :c:type:`v4l2_fract`. This allows the accurate
+    expression of multiples of the NTSC-M frame rate 30000 / 1001. A new
+    field ``readbuffers`` was added to control the driver behaviour in
+    read I/O mode.
+
+    Similar changes were made to struct
+    :c:type:`v4l2_outputparm`.
+
+20. The struct ``v4l2_performance`` and
+    ``VIDIOC_G_PERF`` ioctl were dropped. Except when using the
+    :ref:`read/write I/O method <rw>`, which is limited anyway, this
+    information is already available to applications.
+
+21. The example transformation from RGB to YCbCr color space in the old
+    V4L2 documentation was inaccurate, this has been corrected in
+    :ref:`pixfmt`.
+
+
+V4L2 2003-06-19
+===============
+
+1. A new capability flag ``V4L2_CAP_RADIO`` was added for radio devices.
+   Prior to this change radio devices would identify solely by having
+   exactly one tuner whose type field reads ``V4L2_TUNER_RADIO``.
+
+2. An optional driver access priority mechanism was added, see
+   :ref:`app-pri` for details.
+
+3. The audio input and output interface was found to be incomplete.
+
+   Previously the :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` ioctl would
+   enumerate the available audio inputs. An ioctl to determine the
+   current audio input, if more than one combines with the current video
+   input, did not exist. So ``VIDIOC_G_AUDIO`` was renamed to
+   ``VIDIOC_G_AUDIO_OLD``, this ioctl was removed on Kernel 2.6.39. The
+   :ref:`VIDIOC_ENUMAUDIO` ioctl was added to
+   enumerate audio inputs, while
+   :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` now reports the current
+   audio input.
+
+   The same changes were made to
+   :ref:`VIDIOC_G_AUDOUT <VIDIOC_G_AUDOUT>` and
+   :ref:`VIDIOC_ENUMAUDOUT <VIDIOC_ENUMAUDOUT>`.
+
+   Until further the "videodev" module will automatically translate
+   between the old and new ioctls, but drivers and applications must be
+   updated to successfully compile again.
+
+4. The :ref:`VIDIOC_OVERLAY` ioctl was incorrectly
+   defined with write-read parameter. It was changed to write-only,
+   while the write-read version was renamed to ``VIDIOC_OVERLAY_OLD``.
+   The old ioctl was removed on Kernel 2.6.39. Until further the
+   "videodev" kernel module will automatically translate to the new
+   version, so drivers must be recompiled, but not applications.
+
+5. :ref:`overlay` incorrectly stated that clipping rectangles define
+   regions where the video can be seen. Correct is that clipping
+   rectangles define regions where *no* video shall be displayed and so
+   the graphics surface can be seen.
+
+6. The :ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` and
+   :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls were defined with
+   write-only parameter, inconsistent with other ioctls modifying their
+   argument. They were changed to write-read, while a ``_OLD`` suffix
+   was added to the write-only versions. The old ioctls were removed on
+   Kernel 2.6.39. Drivers and applications assuming a constant parameter
+   need an update.
+
+
+V4L2 2003-11-05
+===============
+
+1. In :ref:`pixfmt-rgb` the following pixel formats were incorrectly
+   transferred from Bill Dirks' V4L2 specification. Descriptions below
+   refer to bytes in memory, in ascending address order.
+
+
+
+   .. flat-table::
+       :header-rows:  1
+       :stub-columns: 0
+
+       * - Symbol
+	 - In this document prior to revision 0.5
+	 - Corrected
+       * - ``V4L2_PIX_FMT_RGB24``
+	 - B, G, R
+	 - R, G, B
+       * - ``V4L2_PIX_FMT_BGR24``
+	 - R, G, B
+	 - B, G, R
+       * - ``V4L2_PIX_FMT_RGB32``
+	 - B, G, R, X
+	 - R, G, B, X
+       * - ``V4L2_PIX_FMT_BGR32``
+	 - R, G, B, X
+	 - B, G, R, X
+
+
+   The ``V4L2_PIX_FMT_BGR24`` example was always correct.
+
+   In :ref:`v4l-image-properties` the mapping of the V4L
+   ``VIDEO_PALETTE_RGB24`` and ``VIDEO_PALETTE_RGB32`` formats to V4L2
+   pixel formats was accordingly corrected.
+
+2. Unrelated to the fixes above, drivers may still interpret some V4L2
+   RGB pixel formats differently. These issues have yet to be addressed,
+   for details see :ref:`pixfmt-rgb`.
+
+
+V4L2 in Linux 2.6.6, 2004-05-09
+===============================
+
+1. The :ref:`VIDIOC_CROPCAP` ioctl was incorrectly
+   defined with read-only parameter. It is now defined as write-read
+   ioctl, while the read-only version was renamed to
+   ``VIDIOC_CROPCAP_OLD``. The old ioctl was removed on Kernel 2.6.39.
+
+
+V4L2 in Linux 2.6.8
+===================
+
+1. A new field ``input`` (former ``reserved[0]``) was added to the
+   struct :c:type:`v4l2_buffer` structure. Purpose of this
+   field is to alternate between video inputs (e. g. cameras) in step
+   with the video capturing process. This function must be enabled with
+   the new ``V4L2_BUF_FLAG_INPUT`` flag. The ``flags`` field is no
+   longer read-only.
+
+
+V4L2 spec erratum 2004-08-01
+============================
+
+1. The return value of the :ref:`func-open` function was incorrectly
+   documented.
+
+2. Audio output ioctls end in -AUDOUT, not -AUDIOOUT.
+
+3. In the Current Audio Input example the ``VIDIOC_G_AUDIO`` ioctl took
+   the wrong argument.
+
+4. The documentation of the :ref:`VIDIOC_QBUF` and
+   :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctls did not mention the
+   struct :c:type:`v4l2_buffer` ``memory`` field. It was
+   also missing from examples. Also on the ``VIDIOC_DQBUF`` page the ``EIO``
+   error code was not documented.
+
+
+V4L2 in Linux 2.6.14
+====================
+
+1. A new sliced VBI interface was added. It is documented in
+   :ref:`sliced` and replaces the interface first proposed in V4L2
+   specification 0.8.
+
+
+V4L2 in Linux 2.6.15
+====================
+
+1. The :ref:`VIDIOC_LOG_STATUS` ioctl was added.
+
+2. New video standards ``V4L2_STD_NTSC_443``, ``V4L2_STD_SECAM_LC``,
+   ``V4L2_STD_SECAM_DK`` (a set of SECAM D, K and K1), and
+   ``V4L2_STD_ATSC`` (a set of ``V4L2_STD_ATSC_8_VSB`` and
+   ``V4L2_STD_ATSC_16_VSB``) were defined. Note the ``V4L2_STD_525_60``
+   set now includes ``V4L2_STD_NTSC_443``. See also
+   :ref:`v4l2-std-id`.
+
+3. The ``VIDIOC_G_COMP`` and ``VIDIOC_S_COMP`` ioctl were renamed to
+   ``VIDIOC_G_MPEGCOMP`` and ``VIDIOC_S_MPEGCOMP`` respectively. Their
+   argument was replaced by a struct
+   ``v4l2_mpeg_compression`` pointer. (The
+   ``VIDIOC_G_MPEGCOMP`` and ``VIDIOC_S_MPEGCOMP`` ioctls where removed
+   in Linux 2.6.25.)
+
+
+V4L2 spec erratum 2005-11-27
+============================
+
+The capture example in :ref:`capture-example` called the
+:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` ioctl without checking if
+cropping is supported. In the video standard selection example in
+:ref:`standard` the :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` call used
+the wrong argument type.
+
+
+V4L2 spec erratum 2006-01-10
+============================
+
+1. The ``V4L2_IN_ST_COLOR_KILL`` flag in struct
+   :c:type:`v4l2_input` not only indicates if the color
+   killer is enabled, but also if it is active. (The color killer
+   disables color decoding when it detects no color in the video signal
+   to improve the image quality.)
+
+2. :ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` is a write-read ioctl, not
+   write-only as stated on its reference page. The ioctl changed in 2003
+   as noted above.
+
+
+V4L2 spec erratum 2006-02-03
+============================
+
+1. In struct :c:type:`v4l2_captureparm` and struct
+   :c:type:`v4l2_outputparm` the ``timeperframe``
+   field gives the time in seconds, not microseconds.
+
+
+V4L2 spec erratum 2006-02-04
+============================
+
+1. The ``clips`` field in struct :c:type:`v4l2_window`
+   must point to an array of struct :c:type:`v4l2_clip`, not
+   a linked list, because drivers ignore the struct
+   struct :c:type:`v4l2_clip`. ``next`` pointer.
+
+
+V4L2 in Linux 2.6.17
+====================
+
+1. New video standard macros were added: ``V4L2_STD_NTSC_M_KR`` (NTSC M
+   South Korea), and the sets ``V4L2_STD_MN``, ``V4L2_STD_B``,
+   ``V4L2_STD_GH`` and ``V4L2_STD_DK``. The ``V4L2_STD_NTSC`` and
+   ``V4L2_STD_SECAM`` sets now include ``V4L2_STD_NTSC_M_KR`` and
+   ``V4L2_STD_SECAM_LC`` respectively.
+
+2. A new ``V4L2_TUNER_MODE_LANG1_LANG2`` was defined to record both
+   languages of a bilingual program. The use of
+   ``V4L2_TUNER_MODE_STEREO`` for this purpose is deprecated now. See
+   the :ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>` section for details.
+
+
+V4L2 spec erratum 2006-09-23 (Draft 0.15)
+=========================================
+
+1. In various places ``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE`` and
+   ``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT`` of the sliced VBI interface were
+   not mentioned along with other buffer types.
+
+2. In :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` it was clarified that the struct
+   :c:type:`v4l2_audio` ``mode`` field is a flags field.
+
+3. :ref:`VIDIOC_QUERYCAP` did not mention the sliced VBI and radio
+   capability flags.
+
+4. In :ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` it was clarified that applications
+   must initialize the tuner ``type`` field of struct
+   :c:type:`v4l2_frequency` before calling
+   :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>`.
+
+5. The ``reserved`` array in struct
+   :c:type:`v4l2_requestbuffers` has 2 elements,
+   not 32.
+
+6. In :ref:`output` and :ref:`raw-vbi` the device file names
+   ``/dev/vout`` which never caught on were replaced by ``/dev/video``.
+
+7. With Linux 2.6.15 the possible range for VBI device minor numbers was
+   extended from 224-239 to 224-255. Accordingly device file names
+   ``/dev/vbi0`` to ``/dev/vbi31`` are possible now.
+
+
+V4L2 in Linux 2.6.18
+====================
+
+1. New ioctls :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
+   :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and
+   :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` were added, a
+   flag to skip unsupported controls with
+   :ref:`VIDIOC_QUERYCTRL`, new control types
+   ``V4L2_CTRL_TYPE_INTEGER64`` and ``V4L2_CTRL_TYPE_CTRL_CLASS``
+   (:c:type:`v4l2_ctrl_type`), and new control flags
+   ``V4L2_CTRL_FLAG_READ_ONLY``, ``V4L2_CTRL_FLAG_UPDATE``,
+   ``V4L2_CTRL_FLAG_INACTIVE`` and ``V4L2_CTRL_FLAG_SLIDER``
+   (:ref:`control-flags`). See :ref:`extended-controls` for details.
+
+
+V4L2 in Linux 2.6.19
+====================
+
+1. In struct :c:type:`v4l2_sliced_vbi_cap` a
+   buffer type field was added replacing a reserved field. Note on
+   architectures where the size of enum types differs from int types the
+   size of the structure changed. The
+   :ref:`VIDIOC_G_SLICED_VBI_CAP <VIDIOC_G_SLICED_VBI_CAP>` ioctl
+   was redefined from being read-only to write-read. Applications must
+   initialize the type field and clear the reserved fields now. These
+   changes may *break the compatibility* with older drivers and
+   applications.
+
+2. The ioctls :ref:`VIDIOC_ENUM_FRAMESIZES`
+   and
+   :ref:`VIDIOC_ENUM_FRAMEINTERVALS`
+   were added.
+
+3. A new pixel format ``V4L2_PIX_FMT_RGB444`` (:ref:`pixfmt-rgb`) was
+   added.
+
+
+V4L2 spec erratum 2006-10-12 (Draft 0.17)
+=========================================
+
+1. ``V4L2_PIX_FMT_HM12`` (:ref:`reserved-formats`) is a YUV 4:2:0, not
+   4:2:2 format.
+
+
+V4L2 in Linux 2.6.21
+====================
+
+1. The ``videodev2.h`` header file is now dual licensed under GNU
+   General Public License version two or later, and under a 3-clause
+   BSD-style license.
+
+
+V4L2 in Linux 2.6.22
+====================
+
+1. Two new field orders ``V4L2_FIELD_INTERLACED_TB`` and
+   ``V4L2_FIELD_INTERLACED_BT`` were added. See :c:type:`v4l2_field` for
+   details.
+
+2. Three new clipping/blending methods with a global or straight or
+   inverted local alpha value were added to the video overlay interface.
+   See the description of the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`
+   and :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctls for details.
+
+   A new ``global_alpha`` field was added to
+   :c:type:`v4l2_window`, extending the structure. This
+   may *break compatibility* with applications using a struct
+   struct :c:type:`v4l2_window` directly. However the
+   :ref:`VIDIOC_G/S/TRY_FMT <VIDIOC_G_FMT>` ioctls, which take a
+   pointer to a :c:type:`v4l2_format` parent structure
+   with padding bytes at the end, are not affected.
+
+3. The format of the ``chromakey`` field in struct
+   :c:type:`v4l2_window` changed from "host order RGB32"
+   to a pixel value in the same format as the framebuffer. This may
+   *break compatibility* with existing applications. Drivers supporting
+   the "host order RGB32" format are not known.
+
+
+V4L2 in Linux 2.6.24
+====================
+
+1. The pixel formats ``V4L2_PIX_FMT_PAL8``, ``V4L2_PIX_FMT_YUV444``,
+   ``V4L2_PIX_FMT_YUV555``, ``V4L2_PIX_FMT_YUV565`` and
+   ``V4L2_PIX_FMT_YUV32`` were added.
+
+
+V4L2 in Linux 2.6.25
+====================
+
+1. The pixel formats :ref:`V4L2_PIX_FMT_Y16 <V4L2-PIX-FMT-Y16>` and
+   :ref:`V4L2_PIX_FMT_SBGGR16 <V4L2-PIX-FMT-SBGGR16>` were added.
+
+2. New :ref:`controls <control>` ``V4L2_CID_POWER_LINE_FREQUENCY``,
+   ``V4L2_CID_HUE_AUTO``, ``V4L2_CID_WHITE_BALANCE_TEMPERATURE``,
+   ``V4L2_CID_SHARPNESS`` and ``V4L2_CID_BACKLIGHT_COMPENSATION`` were
+   added. The controls ``V4L2_CID_BLACK_LEVEL``, ``V4L2_CID_WHITENESS``,
+   ``V4L2_CID_HCENTER`` and ``V4L2_CID_VCENTER`` were deprecated.
+
+3. A :ref:`Camera controls class <camera-controls>` was added, with
+   the new controls ``V4L2_CID_EXPOSURE_AUTO``,
+   ``V4L2_CID_EXPOSURE_ABSOLUTE``, ``V4L2_CID_EXPOSURE_AUTO_PRIORITY``,
+   ``V4L2_CID_PAN_RELATIVE``, ``V4L2_CID_TILT_RELATIVE``,
+   ``V4L2_CID_PAN_RESET``, ``V4L2_CID_TILT_RESET``,
+   ``V4L2_CID_PAN_ABSOLUTE``, ``V4L2_CID_TILT_ABSOLUTE``,
+   ``V4L2_CID_FOCUS_ABSOLUTE``, ``V4L2_CID_FOCUS_RELATIVE`` and
+   ``V4L2_CID_FOCUS_AUTO``.
+
+4. The ``VIDIOC_G_MPEGCOMP`` and ``VIDIOC_S_MPEGCOMP`` ioctls, which
+   were superseded by the :ref:`extended controls <extended-controls>`
+   interface in Linux 2.6.18, where finally removed from the
+   ``videodev2.h`` header file.
+
+
+V4L2 in Linux 2.6.26
+====================
+
+1. The pixel formats ``V4L2_PIX_FMT_Y16`` and ``V4L2_PIX_FMT_SBGGR16``
+   were added.
+
+2. Added user controls ``V4L2_CID_CHROMA_AGC`` and
+   ``V4L2_CID_COLOR_KILLER``.
+
+
+V4L2 in Linux 2.6.27
+====================
+
+1. The :ref:`VIDIOC_S_HW_FREQ_SEEK` ioctl
+   and the ``V4L2_CAP_HW_FREQ_SEEK`` capability were added.
+
+2. The pixel formats ``V4L2_PIX_FMT_YVYU``, ``V4L2_PIX_FMT_PCA501``,
+   ``V4L2_PIX_FMT_PCA505``, ``V4L2_PIX_FMT_PCA508``,
+   ``V4L2_PIX_FMT_PCA561``, ``V4L2_PIX_FMT_SGBRG8``,
+   ``V4L2_PIX_FMT_PAC207`` and ``V4L2_PIX_FMT_PJPG`` were added.
+
+
+V4L2 in Linux 2.6.28
+====================
+
+1. Added ``V4L2_MPEG_AUDIO_ENCODING_AAC`` and
+   ``V4L2_MPEG_AUDIO_ENCODING_AC3`` MPEG audio encodings.
+
+2. Added ``V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC`` MPEG video encoding.
+
+3. The pixel formats ``V4L2_PIX_FMT_SGRBG10`` and
+   ``V4L2_PIX_FMT_SGRBG10DPCM8`` were added.
+
+
+V4L2 in Linux 2.6.29
+====================
+
+1. The ``VIDIOC_G_CHIP_IDENT`` ioctl was renamed to
+   ``VIDIOC_G_CHIP_IDENT_OLD`` and ``VIDIOC_DBG_G_CHIP_IDENT`` was
+   introduced in its place. The old struct
+   struct ``v4l2_chip_ident`` was renamed to
+   struct ``v4l2_chip_ident_old``.
+
+2. The pixel formats ``V4L2_PIX_FMT_VYUY``, ``V4L2_PIX_FMT_NV16`` and
+   ``V4L2_PIX_FMT_NV61`` were added.
+
+3. Added camera controls ``V4L2_CID_ZOOM_ABSOLUTE``,
+   ``V4L2_CID_ZOOM_RELATIVE``, ``V4L2_CID_ZOOM_CONTINUOUS`` and
+   ``V4L2_CID_PRIVACY``.
+
+
+V4L2 in Linux 2.6.30
+====================
+
+1. New control flag ``V4L2_CTRL_FLAG_WRITE_ONLY`` was added.
+
+2. New control ``V4L2_CID_COLORFX`` was added.
+
+
+V4L2 in Linux 2.6.32
+====================
+
+1. In order to be easier to compare a V4L2 API and a kernel version, now
+   V4L2 API is numbered using the Linux Kernel version numeration.
+
+2. Finalized the RDS capture API. See :ref:`rds` for more information.
+
+3. Added new capabilities for modulators and RDS encoders.
+
+4. Add description for libv4l API.
+
+5. Added support for string controls via new type
+   ``V4L2_CTRL_TYPE_STRING``.
+
+6. Added ``V4L2_CID_BAND_STOP_FILTER`` documentation.
+
+7. Added FM Modulator (FM TX) Extended Control Class:
+   ``V4L2_CTRL_CLASS_FM_TX`` and their Control IDs.
+
+8. Added FM Receiver (FM RX) Extended Control Class:
+   ``V4L2_CTRL_CLASS_FM_RX`` and their Control IDs.
+
+9. Added Remote Controller chapter, describing the default Remote
+   Controller mapping for media devices.
+
+
+V4L2 in Linux 2.6.33
+====================
+
+1. Added support for Digital Video timings in order to support HDTV
+   receivers and transmitters.
+
+
+V4L2 in Linux 2.6.34
+====================
+
+1. Added ``V4L2_CID_IRIS_ABSOLUTE`` and ``V4L2_CID_IRIS_RELATIVE``
+   controls to the :ref:`Camera controls class <camera-controls>`.
+
+
+V4L2 in Linux 2.6.37
+====================
+
+1. Remove the vtx (videotext/teletext) API. This API was no longer used
+   and no hardware exists to verify the API. Nor were any userspace
+   applications found that used it. It was originally scheduled for
+   removal in 2.6.35.
+
+
+V4L2 in Linux 2.6.39
+====================
+
+1. The old VIDIOC_*_OLD symbols and V4L1 support were removed.
+
+2. Multi-planar API added. Does not affect the compatibility of current
+   drivers and applications. See :ref:`multi-planar API <planar-apis>`
+   for details.
+
+
+V4L2 in Linux 3.1
+=================
+
+1. VIDIOC_QUERYCAP now returns a per-subsystem version instead of a
+   per-driver one.
+
+   Standardize an error code for invalid ioctl.
+
+   Added V4L2_CTRL_TYPE_BITMASK.
+
+
+V4L2 in Linux 3.2
+=================
+
+1. V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to
+   userspace.
+
+2. Add selection API for extended control over cropping and composing.
+   Does not affect the compatibility of current drivers and
+   applications. See :ref:`selection API <selection-api>` for details.
+
+
+V4L2 in Linux 3.3
+=================
+
+1. Added ``V4L2_CID_ALPHA_COMPONENT`` control to the
+   :ref:`User controls class <control>`.
+
+2. Added the device_caps field to struct v4l2_capabilities and added
+   the new V4L2_CAP_DEVICE_CAPS capability.
+
+
+V4L2 in Linux 3.4
+=================
+
+1. Added :ref:`JPEG compression control class <jpeg-controls>`.
+
+2. Extended the DV Timings API:
+   :ref:`VIDIOC_ENUM_DV_TIMINGS`,
+   :ref:`VIDIOC_QUERY_DV_TIMINGS` and
+   :ref:`VIDIOC_DV_TIMINGS_CAP`.
+
+
+V4L2 in Linux 3.5
+=================
+
+1. Added integer menus, the new type will be
+   V4L2_CTRL_TYPE_INTEGER_MENU.
+
+2. Added selection API for V4L2 subdev interface:
+   :ref:`VIDIOC_SUBDEV_G_SELECTION` and
+   :ref:`VIDIOC_SUBDEV_S_SELECTION <VIDIOC_SUBDEV_G_SELECTION>`.
+
+3. Added ``V4L2_COLORFX_ANTIQUE``, ``V4L2_COLORFX_ART_FREEZE``,
+   ``V4L2_COLORFX_AQUA``, ``V4L2_COLORFX_SILHOUETTE``,
+   ``V4L2_COLORFX_SOLARIZATION``, ``V4L2_COLORFX_VIVID`` and
+   ``V4L2_COLORFX_ARBITRARY_CBCR`` menu items to the
+   ``V4L2_CID_COLORFX`` control.
+
+4. Added ``V4L2_CID_COLORFX_CBCR`` control.
+
+5. Added camera controls ``V4L2_CID_AUTO_EXPOSURE_BIAS``,
+   ``V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE``,
+   ``V4L2_CID_IMAGE_STABILIZATION``, ``V4L2_CID_ISO_SENSITIVITY``,
+   ``V4L2_CID_ISO_SENSITIVITY_AUTO``, ``V4L2_CID_EXPOSURE_METERING``,
+   ``V4L2_CID_SCENE_MODE``, ``V4L2_CID_3A_LOCK``,
+   ``V4L2_CID_AUTO_FOCUS_START``, ``V4L2_CID_AUTO_FOCUS_STOP``,
+   ``V4L2_CID_AUTO_FOCUS_STATUS`` and ``V4L2_CID_AUTO_FOCUS_RANGE``.
+
+
+V4L2 in Linux 3.6
+=================
+
+1. Replaced ``input`` in struct :c:type:`v4l2_buffer` by
+   ``reserved2`` and removed ``V4L2_BUF_FLAG_INPUT``.
+
+2. Added V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE
+   capabilities.
+
+3. Added support for frequency band enumerations:
+   :ref:`VIDIOC_ENUM_FREQ_BANDS`.
+
+
+V4L2 in Linux 3.9
+=================
+
+1. Added timestamp types to ``flags`` field in
+   struct :c:type:`v4l2_buffer`. See :ref:`buffer-flags`.
+
+2. Added ``V4L2_EVENT_CTRL_CH_RANGE`` control event changes flag. See
+   :ref:`ctrl-changes-flags`.
+
+
+V4L2 in Linux 3.10
+==================
+
+1. Removed obsolete and unused DV_PRESET ioctls VIDIOC_G_DV_PRESET,
+   VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and
+   VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output
+   capability flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS.
+
+2. Added new debugging ioctl
+   :ref:`VIDIOC_DBG_G_CHIP_INFO`.
+
+
+V4L2 in Linux 3.11
+==================
+
+1. Remove obsolete ``VIDIOC_DBG_G_CHIP_IDENT`` ioctl.
+
+
+V4L2 in Linux 3.14
+==================
+
+1. In struct :c:type:`v4l2_rect`, the type of ``width`` and
+   ``height`` fields changed from _s32 to _u32.
+
+
+V4L2 in Linux 3.15
+==================
+
+1. Added Software Defined Radio (SDR) Interface.
+
+
+V4L2 in Linux 3.16
+==================
+
+1. Added event V4L2_EVENT_SOURCE_CHANGE.
+
+
+V4L2 in Linux 3.17
+==================
+
+1. Extended struct :c:type:`v4l2_pix_format`. Added
+   format flags.
+
+2. Added compound control types and
+   :ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>`.
+
+
+V4L2 in Linux 3.18
+==================
+
+1. Added ``V4L2_CID_PAN_SPEED`` and ``V4L2_CID_TILT_SPEED`` camera
+   controls.
+
+
+V4L2 in Linux 3.19
+==================
+
+1. Rewrote Colorspace chapter, added new enum
+   :c:type:`v4l2_ycbcr_encoding` and enum
+   :c:type:`v4l2_quantization` fields to struct
+   :c:type:`v4l2_pix_format`, struct
+   :c:type:`v4l2_pix_format_mplane` and
+   struct :c:type:`v4l2_mbus_framefmt`.
+
+
+V4L2 in Linux 4.4
+=================
+
+1. Renamed ``V4L2_TUNER_ADC`` to ``V4L2_TUNER_SDR``. The use of
+   ``V4L2_TUNER_ADC`` is deprecated now.
+
+2. Added ``V4L2_CID_RF_TUNER_RF_GAIN`` RF Tuner control.
+
+3. Added transmitter support for Software Defined Radio (SDR) Interface.
+
+
+.. _other:
+
+Relation of V4L2 to other Linux multimedia APIs
+===============================================
+
+
+.. _xvideo:
+
+X Video Extension
+-----------------
+
+The X Video Extension (abbreviated XVideo or just Xv) is an extension of
+the X Window system, implemented for example by the XFree86 project. Its
+scope is similar to V4L2, an API to video capture and output devices for
+X clients. Xv allows applications to display live video in a window,
+send window contents to a TV output, and capture or output still images
+in XPixmaps [#f1]_. With their implementation XFree86 makes the extension
+available across many operating systems and architectures.
+
+Because the driver is embedded into the X server Xv has a number of
+advantages over the V4L2 :ref:`video overlay interface <overlay>`. The
+driver can easily determine the overlay target, i. e. visible graphics
+memory or off-screen buffers for a destructive overlay. It can program
+the RAMDAC for a non-destructive overlay, scaling or color-keying, or
+the clipping functions of the video capture hardware, always in sync
+with drawing operations or windows moving or changing their stacking
+order.
+
+To combine the advantages of Xv and V4L a special Xv driver exists in
+XFree86 and XOrg, just programming any overlay capable Video4Linux
+device it finds. To enable it ``/etc/X11/XF86Config`` must contain these
+lines:
+
+::
+
+    Section "Module"
+	Load "v4l"
+    EndSection
+
+As of XFree86 4.2 this driver still supports only V4L ioctls, however it
+should work just fine with all V4L2 devices through the V4L2
+backward-compatibility layer. Since V4L2 permits multiple opens it is
+possible (if supported by the V4L2 driver) to capture video while an X
+client requested video overlay. Restrictions of simultaneous capturing
+and overlay are discussed in :ref:`overlay` apply.
+
+Only marginally related to V4L2, XFree86 extended Xv to support hardware
+YUV to RGB conversion and scaling for faster video playback, and added
+an interface to MPEG-2 decoding hardware. This API is useful to display
+images captured with V4L2 devices.
+
+
+Digital Video
+-------------
+
+V4L2 does not support digital terrestrial, cable or satellite broadcast.
+A separate project aiming at digital receivers exists. You can find its
+homepage at `https://linuxtv.org <https://linuxtv.org>`__. The Linux
+DVB API has no connection to the V4L2 API except that drivers for hybrid
+hardware may support both.
+
+
+Audio Interfaces
+----------------
+
+[to do - OSS/ALSA]
+
+
+.. _experimental:
+
+Experimental API Elements
+=========================
+
+The following V4L2 API elements are currently experimental and may
+change in the future.
+
+-  :ref:`VIDIOC_DBG_G_REGISTER` and
+   :ref:`VIDIOC_DBG_S_REGISTER <VIDIOC_DBG_G_REGISTER>` ioctls.
+
+-  :ref:`VIDIOC_DBG_G_CHIP_INFO` ioctl.
+
+
+.. _obsolete:
+
+Obsolete API Elements
+=====================
+
+The following V4L2 API elements were superseded by new interfaces and
+should not be implemented in new drivers.
+
+-  ``VIDIOC_G_MPEGCOMP`` and ``VIDIOC_S_MPEGCOMP`` ioctls. Use Extended
+   Controls, :ref:`extended-controls`.
+
+-  VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET,
+   VIDIOC_ENUM_DV_PRESETS and VIDIOC_QUERY_DV_PRESET ioctls. Use
+   the DV Timings API (:ref:`dv-timings`).
+
+-  ``VIDIOC_SUBDEV_G_CROP`` and ``VIDIOC_SUBDEV_S_CROP`` ioctls. Use
+   ``VIDIOC_SUBDEV_G_SELECTION`` and ``VIDIOC_SUBDEV_S_SELECTION``,
+   :ref:`VIDIOC_SUBDEV_G_SELECTION`.
+
+.. [#f1]
+   This is not implemented in XFree86.
diff --git a/Documentation/userspace-api/media/v4l/hsv-formats.rst b/Documentation/userspace-api/media/v4l/hsv-formats.rst
new file mode 100644
index 000000000000..4906f7e0d80d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/hsv-formats.rst
@@ -0,0 +1,26 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _hsv-formats:
+
+***********
+HSV Formats
+***********
+
+These formats store the color information of the image
+in a geometrical representation. The colors are mapped into a
+cylinder, where the angle is the HUE, the height is the VALUE
+and the distance to the center is the SATURATION. This is a very
+useful format for image segmentation algorithms.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    pixfmt-packed-hsv
diff --git a/Documentation/userspace-api/media/v4l/io.rst b/Documentation/userspace-api/media/v4l/io.rst
new file mode 100644
index 000000000000..de0e2f529268
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/io.rst
@@ -0,0 +1,58 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _io:
+
+############
+Input/Output
+############
+The V4L2 API defines several different methods to read from or write to
+a device. All drivers exchanging data with applications must support at
+least one of them.
+
+The classic I/O method using the :ref:`read() <func-read>` and
+:ref:`write() <func-write>` function is automatically selected after opening a
+V4L2 device. When the driver does not support this method attempts to
+read or write will fail at any time.
+
+Other methods must be negotiated. To select the streaming I/O method
+with memory mapped or user buffers applications call the
+:ref:`VIDIOC_REQBUFS` ioctl. The asynchronous I/O
+method is not defined yet.
+
+Video overlay can be considered another I/O method, although the
+application does not directly receive the image data. It is selected by
+initiating video overlay with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
+ioctl. For more information see :ref:`overlay`.
+
+Generally exactly one I/O method, including overlay, is associated with
+each file descriptor. The only exceptions are applications not
+exchanging data with a driver ("panel applications", see :ref:`open`)
+and drivers permitting simultaneous video capturing and overlay using
+the same file descriptor, for compatibility with V4L and earlier
+versions of V4L2.
+
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_REQBUFS` would permit this to some
+degree, but for simplicity drivers need not support switching the I/O
+method (after first switching away from read/write) other than by
+closing and reopening the device.
+
+The following sections describe the various I/O methods in more detail.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    rw
+    mmap
+    userp
+    dmabuf
+    async
+    buffer
+    field-order
diff --git a/Documentation/userspace-api/media/v4l/libv4l-introduction.rst b/Documentation/userspace-api/media/v4l/libv4l-introduction.rst
new file mode 100644
index 000000000000..95f3127b4749
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/libv4l-introduction.rst
@@ -0,0 +1,191 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _libv4l-introduction:
+
+************
+Introduction
+************
+
+libv4l is a collection of libraries which adds a thin abstraction layer
+on top of video4linux2 devices. The purpose of this (thin) layer is to
+make it easy for application writers to support a wide variety of
+devices without having to write separate code for different devices in
+the same class.
+
+An example of using libv4l is provided by
+:ref:`v4l2grab <v4l2grab-example>`.
+
+libv4l consists of 3 different libraries:
+
+
+libv4lconvert
+=============
+
+libv4lconvert is a library that converts several different pixelformats
+found in V4L2 drivers into a few common RGB and YUY formats.
+
+It currently accepts the following V4L2 driver formats:
+:ref:`V4L2_PIX_FMT_BGR24 <V4L2-PIX-FMT-BGR24>`,
+:ref:`V4L2_PIX_FMT_HM12 <V4L2-PIX-FMT-HM12>`,
+:ref:`V4L2_PIX_FMT_JPEG <V4L2-PIX-FMT-JPEG>`,
+:ref:`V4L2_PIX_FMT_MJPEG <V4L2-PIX-FMT-MJPEG>`,
+:ref:`V4L2_PIX_FMT_MR97310A <V4L2-PIX-FMT-MR97310A>`,
+:ref:`V4L2_PIX_FMT_OV511 <V4L2-PIX-FMT-OV511>`,
+:ref:`V4L2_PIX_FMT_OV518 <V4L2-PIX-FMT-OV518>`,
+:ref:`V4L2_PIX_FMT_PAC207 <V4L2-PIX-FMT-PAC207>`,
+:ref:`V4L2_PIX_FMT_PJPG <V4L2-PIX-FMT-PJPG>`,
+:ref:`V4L2_PIX_FMT_RGB24 <V4L2-PIX-FMT-RGB24>`,
+:ref:`V4L2_PIX_FMT_SBGGR8 <V4L2-PIX-FMT-SBGGR8>`,
+:ref:`V4L2_PIX_FMT_SGBRG8 <V4L2-PIX-FMT-SGBRG8>`,
+:ref:`V4L2_PIX_FMT_SGRBG8 <V4L2-PIX-FMT-SGRBG8>`,
+:ref:`V4L2_PIX_FMT_SN9C10X <V4L2-PIX-FMT-SN9C10X>`,
+:ref:`V4L2_PIX_FMT_SN9C20X_I420 <V4L2-PIX-FMT-SN9C20X-I420>`,
+:ref:`V4L2_PIX_FMT_SPCA501 <V4L2-PIX-FMT-SPCA501>`,
+:ref:`V4L2_PIX_FMT_SPCA505 <V4L2-PIX-FMT-SPCA505>`,
+:ref:`V4L2_PIX_FMT_SPCA508 <V4L2-PIX-FMT-SPCA508>`,
+:ref:`V4L2_PIX_FMT_SPCA561 <V4L2-PIX-FMT-SPCA561>`,
+:ref:`V4L2_PIX_FMT_SQ905C <V4L2-PIX-FMT-SQ905C>`,
+:ref:`V4L2_PIX_FMT_SRGGB8 <V4L2-PIX-FMT-SRGGB8>`,
+:ref:`V4L2_PIX_FMT_UYVY <V4L2-PIX-FMT-UYVY>`,
+:ref:`V4L2_PIX_FMT_YUV420 <V4L2-PIX-FMT-YUV420>`,
+:ref:`V4L2_PIX_FMT_YUYV <V4L2-PIX-FMT-YUYV>`,
+:ref:`V4L2_PIX_FMT_YVU420 <V4L2-PIX-FMT-YVU420>`, and
+:ref:`V4L2_PIX_FMT_YVYU <V4L2-PIX-FMT-YVYU>`.
+
+Later on libv4lconvert was expanded to also be able to do various video
+processing functions to improve webcam video quality. The video
+processing is split in to 2 parts: libv4lconvert/control and
+libv4lconvert/processing.
+
+The control part is used to offer video controls which can be used to
+control the video processing functions made available by
+libv4lconvert/processing. These controls are stored application wide
+(until reboot) by using a persistent shared memory object.
+
+libv4lconvert/processing offers the actual video processing
+functionality.
+
+
+libv4l1
+=======
+
+This library offers functions that can be used to quickly make v4l1
+applications work with v4l2 devices. These functions work exactly like
+the normal open/close/etc, except that libv4l1 does full emulation of
+the v4l1 api on top of v4l2 drivers, in case of v4l1 drivers it will
+just pass calls through.
+
+Since those functions are emulations of the old V4L1 API, it shouldn't
+be used for new applications.
+
+
+libv4l2
+=======
+
+This library should be used for all modern V4L2 applications.
+
+It provides handles to call V4L2 open/ioctl/close/poll methods. Instead
+of just providing the raw output of the device, it enhances the calls in
+the sense that it will use libv4lconvert to provide more video formats
+and to enhance the image quality.
+
+In most cases, libv4l2 just passes the calls directly through to the
+v4l2 driver, intercepting the calls to
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>`,
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`,
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`,
+:ref:`VIDIOC_ENUM_FRAMESIZES <VIDIOC_ENUM_FRAMESIZES>` and
+:ref:`VIDIOC_ENUM_FRAMEINTERVALS <VIDIOC_ENUM_FRAMEINTERVALS>` in
+order to emulate the formats
+:ref:`V4L2_PIX_FMT_BGR24 <V4L2-PIX-FMT-BGR24>`,
+:ref:`V4L2_PIX_FMT_RGB24 <V4L2-PIX-FMT-RGB24>`,
+:ref:`V4L2_PIX_FMT_YUV420 <V4L2-PIX-FMT-YUV420>`, and
+:ref:`V4L2_PIX_FMT_YVU420 <V4L2-PIX-FMT-YVU420>`, if they aren't
+available in the driver. :ref:`VIDIOC_ENUM_FMT <VIDIOC_ENUM_FMT>`
+keeps enumerating the hardware supported formats, plus the emulated
+formats offered by libv4l at the end.
+
+
+.. _libv4l-ops:
+
+Libv4l device control functions
+-------------------------------
+
+The common file operation methods are provided by libv4l.
+
+Those functions operate just like the gcc function ``dup()`` and
+V4L2 functions
+:c:func:`open() <v4l2-open>`, :c:func:`close() <v4l2-close>`,
+:c:func:`ioctl() <v4l2-ioctl>`, :c:func:`read() <v4l2-read>`,
+:c:func:`mmap() <v4l2-mmap>` and :c:func:`munmap() <v4l2-munmap>`:
+
+.. c:function:: int v4l2_open(const char *file, int oflag, ...)
+
+   operates like the :c:func:`open() <v4l2-open>` function.
+
+.. c:function:: int v4l2_close(int fd)
+
+   operates like the :c:func:`close() <v4l2-close>` function.
+
+.. c:function:: int v4l2_dup(int fd)
+
+   operates like the libc ``dup()`` function, duplicating a file handler.
+
+.. c:function:: int v4l2_ioctl (int fd, unsigned long int request, ...)
+
+   operates like the :c:func:`ioctl() <v4l2-ioctl>` function.
+
+.. c:function:: int v4l2_read (int fd, void* buffer, size_t n)
+
+   operates like the :c:func:`read() <v4l2-read>` function.
+
+.. c:function:: void v4l2_mmap(void *start, size_t length, int prot, int flags, int fd, int64_t offset);
+
+   operates like the :c:func:`munmap() <v4l2-munmap>` function.
+
+.. c:function:: int v4l2_munmap(void *_start, size_t length);
+
+   operates like the :c:func:`munmap() <v4l2-munmap>` function.
+
+Those functions provide additional control:
+
+.. c:function:: int v4l2_fd_open(int fd, int v4l2_flags)
+
+   opens an already opened fd for further use through v4l2lib and possibly
+   modify libv4l2's default behavior through the ``v4l2_flags`` argument.
+   Currently, ``v4l2_flags`` can be ``V4L2_DISABLE_CONVERSION``, to disable
+   format conversion.
+
+.. c:function:: int v4l2_set_control(int fd, int cid, int value)
+
+   This function takes a value of 0 - 65535, and then scales that range to the
+   actual range of the given v4l control id, and then if the cid exists and is
+   not locked sets the cid to the scaled value.
+
+.. c:function:: int v4l2_get_control(int fd, int cid)
+
+   This function returns a value of 0 - 65535, scaled to from the actual range
+   of the given v4l control id. when the cid does not exist, could not be
+   accessed for some reason, or some error occurred 0 is returned.
+
+
+v4l1compat.so wrapper library
+=============================
+
+This library intercepts calls to
+:c:func:`open() <v4l2-open>`, :c:func:`close() <v4l2-close>`,
+:c:func:`ioctl() <v4l2-ioctl>`, :c:func:`mmap() <v4l2-mmap>` and
+:c:func:`munmap() <v4l2-munmap>`
+operations and redirects them to the libv4l counterparts, by using
+``LD_PRELOAD=/usr/lib/v4l1compat.so``. It also emulates V4L1 calls via V4L2
+API.
+
+It allows usage of binary legacy applications that still don't use
+libv4l.
diff --git a/Documentation/userspace-api/media/v4l/libv4l.rst b/Documentation/userspace-api/media/v4l/libv4l.rst
new file mode 100644
index 000000000000..5ea2016cac65
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/libv4l.rst
@@ -0,0 +1,20 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _libv4l:
+
+************************
+Libv4l Userspace Library
+************************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    libv4l-introduction
diff --git a/Documentation/userspace-api/media/v4l/meta-formats.rst b/Documentation/userspace-api/media/v4l/meta-formats.rst
new file mode 100644
index 000000000000..7dcc4bacbb0c
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/meta-formats.rst
@@ -0,0 +1,27 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _meta-formats:
+
+****************
+Metadata Formats
+****************
+
+These formats are used for the :ref:`metadata` interface only.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    pixfmt-meta-d4xx
+    pixfmt-meta-intel-ipu3
+    pixfmt-meta-uvc
+    pixfmt-meta-vsp1-hgo
+    pixfmt-meta-vsp1-hgt
+    pixfmt-meta-vivid
diff --git a/Documentation/userspace-api/media/v4l/mmap.rst b/Documentation/userspace-api/media/v4l/mmap.rst
new file mode 100644
index 000000000000..9c44d05ebc3f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/mmap.rst
@@ -0,0 +1,292 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _mmap:
+
+******************************
+Streaming I/O (Memory Mapping)
+******************************
+
+Input and output devices support this I/O method when the
+``V4L2_CAP_STREAMING`` flag in the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl is set. There are two
+streaming methods, to determine if the memory mapping flavor is
+supported applications must call the :ref:`VIDIOC_REQBUFS` ioctl
+with the memory type set to ``V4L2_MEMORY_MMAP``.
+
+Streaming is an I/O method where only pointers to buffers are exchanged
+between application and driver, the data itself is not copied. Memory
+mapping is primarily intended to map buffers in device memory into the
+application's address space. Device memory can be for example the video
+memory on a graphics card with a video capture add-on. However, being
+the most efficient I/O method available for a long time, many other
+drivers support streaming as well, allocating buffers in DMA-able main
+memory.
+
+A driver can support many sets of buffers. Each set is identified by a
+unique buffer type value. The sets are independent and each set can hold
+a different type of data. To access different sets at the same time
+different file descriptors must be used. [#f1]_
+
+To allocate device buffers applications call the
+:ref:`VIDIOC_REQBUFS` ioctl with the desired number
+of buffers and buffer type, for example ``V4L2_BUF_TYPE_VIDEO_CAPTURE``.
+This ioctl can also be used to change the number of buffers or to free
+the allocated memory, provided none of the buffers are still mapped.
+
+Before applications can access the buffers they must map them into their
+address space with the :ref:`mmap() <func-mmap>` function. The
+location of the buffers in device memory can be determined with the
+:ref:`VIDIOC_QUERYBUF` ioctl. In the single-planar
+API case, the ``m.offset`` and ``length`` returned in a struct
+:c:type:`v4l2_buffer` are passed as sixth and second
+parameter to the :ref:`mmap() <func-mmap>` function. When using the
+multi-planar API, struct :c:type:`v4l2_buffer` contains an
+array of struct :c:type:`v4l2_plane` structures, each
+containing its own ``m.offset`` and ``length``. When using the
+multi-planar API, every plane of every buffer has to be mapped
+separately, so the number of calls to :ref:`mmap() <func-mmap>` should
+be equal to number of buffers times number of planes in each buffer. The
+offset and length values must not be modified. Remember, the buffers are
+allocated in physical memory, as opposed to virtual memory, which can be
+swapped out to disk. Applications should free the buffers as soon as
+possible with the :ref:`munmap() <func-munmap>` function.
+
+Example: Mapping buffers in the single-planar API
+=================================================
+
+.. code-block:: c
+
+    struct v4l2_requestbuffers reqbuf;
+    struct {
+	void *start;
+	size_t length;
+    } *buffers;
+    unsigned int i;
+
+    memset(&reqbuf, 0, sizeof(reqbuf));
+    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+    reqbuf.memory = V4L2_MEMORY_MMAP;
+    reqbuf.count = 20;
+
+    if (-1 == ioctl (fd, VIDIOC_REQBUFS, &reqbuf)) {
+	if (errno == EINVAL)
+	    printf("Video capturing or mmap-streaming is not supported\\n");
+	else
+	    perror("VIDIOC_REQBUFS");
+
+	exit(EXIT_FAILURE);
+    }
+
+    /* We want at least five buffers. */
+
+    if (reqbuf.count < 5) {
+	/* You may need to free the buffers here. */
+	printf("Not enough buffer memory\\n");
+	exit(EXIT_FAILURE);
+    }
+
+    buffers = calloc(reqbuf.count, sizeof(*buffers));
+    assert(buffers != NULL);
+
+    for (i = 0; i < reqbuf.count; i++) {
+	struct v4l2_buffer buffer;
+
+	memset(&buffer, 0, sizeof(buffer));
+	buffer.type = reqbuf.type;
+	buffer.memory = V4L2_MEMORY_MMAP;
+	buffer.index = i;
+
+	if (-1 == ioctl (fd, VIDIOC_QUERYBUF, &buffer)) {
+	    perror("VIDIOC_QUERYBUF");
+	    exit(EXIT_FAILURE);
+	}
+
+	buffers[i].length = buffer.length; /* remember for munmap() */
+
+	buffers[i].start = mmap(NULL, buffer.length,
+		    PROT_READ | PROT_WRITE, /* recommended */
+		    MAP_SHARED,             /* recommended */
+		    fd, buffer.m.offset);
+
+	if (MAP_FAILED == buffers[i].start) {
+	    /* If you do not exit here you should unmap() and free()
+	       the buffers mapped so far. */
+	    perror("mmap");
+	    exit(EXIT_FAILURE);
+	}
+    }
+
+    /* Cleanup. */
+
+    for (i = 0; i < reqbuf.count; i++)
+	munmap(buffers[i].start, buffers[i].length);
+
+
+Example: Mapping buffers in the multi-planar API
+================================================
+
+.. code-block:: c
+
+    struct v4l2_requestbuffers reqbuf;
+    /* Our current format uses 3 planes per buffer */
+    #define FMT_NUM_PLANES = 3
+
+    struct {
+	void *start[FMT_NUM_PLANES];
+	size_t length[FMT_NUM_PLANES];
+    } *buffers;
+    unsigned int i, j;
+
+    memset(&reqbuf, 0, sizeof(reqbuf));
+    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+    reqbuf.memory = V4L2_MEMORY_MMAP;
+    reqbuf.count = 20;
+
+    if (ioctl(fd, VIDIOC_REQBUFS, &reqbuf) < 0) {
+	if (errno == EINVAL)
+	    printf("Video capturing or mmap-streaming is not supported\\n");
+	else
+	    perror("VIDIOC_REQBUFS");
+
+	exit(EXIT_FAILURE);
+    }
+
+    /* We want at least five buffers. */
+
+    if (reqbuf.count < 5) {
+	/* You may need to free the buffers here. */
+	printf("Not enough buffer memory\\n");
+	exit(EXIT_FAILURE);
+    }
+
+    buffers = calloc(reqbuf.count, sizeof(*buffers));
+    assert(buffers != NULL);
+
+    for (i = 0; i < reqbuf.count; i++) {
+	struct v4l2_buffer buffer;
+	struct v4l2_plane planes[FMT_NUM_PLANES];
+
+	memset(&buffer, 0, sizeof(buffer));
+	buffer.type = reqbuf.type;
+	buffer.memory = V4L2_MEMORY_MMAP;
+	buffer.index = i;
+	/* length in struct v4l2_buffer in multi-planar API stores the size
+	 * of planes array. */
+	buffer.length = FMT_NUM_PLANES;
+	buffer.m.planes = planes;
+
+	if (ioctl(fd, VIDIOC_QUERYBUF, &buffer) < 0) {
+	    perror("VIDIOC_QUERYBUF");
+	    exit(EXIT_FAILURE);
+	}
+
+	/* Every plane has to be mapped separately */
+	for (j = 0; j < FMT_NUM_PLANES; j++) {
+	    buffers[i].length[j] = buffer.m.planes[j].length; /* remember for munmap() */
+
+	    buffers[i].start[j] = mmap(NULL, buffer.m.planes[j].length,
+		     PROT_READ | PROT_WRITE, /* recommended */
+		     MAP_SHARED,             /* recommended */
+		     fd, buffer.m.planes[j].m.offset);
+
+	    if (MAP_FAILED == buffers[i].start[j]) {
+		/* If you do not exit here you should unmap() and free()
+		   the buffers and planes mapped so far. */
+		perror("mmap");
+		exit(EXIT_FAILURE);
+	    }
+	}
+    }
+
+    /* Cleanup. */
+
+    for (i = 0; i < reqbuf.count; i++)
+	for (j = 0; j < FMT_NUM_PLANES; j++)
+	    munmap(buffers[i].start[j], buffers[i].length[j]);
+
+Conceptually streaming drivers maintain two buffer queues, an incoming
+and an outgoing queue. They separate the synchronous capture or output
+operation locked to a video clock from the application which is subject
+to random disk or network delays and preemption by other processes,
+thereby reducing the probability of data loss. The queues are organized
+as FIFOs, buffers will be output in the order enqueued in the incoming
+FIFO, and were captured in the order dequeued from the outgoing FIFO.
+
+The driver may require a minimum number of buffers enqueued at all times
+to function, apart of this no limit exists on the number of buffers
+applications can enqueue in advance, or dequeue and process. They can
+also enqueue in a different order than buffers have been dequeued, and
+the driver can *fill* enqueued *empty* buffers in any order.  [#f2]_ The
+index number of a buffer (struct :c:type:`v4l2_buffer`
+``index``) plays no role here, it only identifies the buffer.
+
+Initially all mapped buffers are in dequeued state, inaccessible by the
+driver. For capturing applications it is customary to first enqueue all
+mapped buffers, then to start capturing and enter the read loop. Here
+the application waits until a filled buffer can be dequeued, and
+re-enqueues the buffer when the data is no longer needed. Output
+applications fill and enqueue buffers, when enough buffers are stacked
+up the output is started with :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`.
+In the write loop, when the application runs out of free buffers, it
+must wait until an empty buffer can be dequeued and reused.
+
+To enqueue and dequeue a buffer applications use the
+:ref:`VIVIOC_QBUF <VIDIOC_QBUF>` and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`
+ioctl. The status of a buffer being mapped, enqueued, full or empty can
+be determined at any time using the :ref:`VIDIOC_QUERYBUF` ioctl. Two
+methods exist to suspend execution of the application until one or more
+buffers can be dequeued.  By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`
+blocks when no buffer is in the outgoing queue. When the ``O_NONBLOCK``
+flag was given to the :ref:`open() <func-open>` function,
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN``
+error code when no buffer is available. The :ref:`select() <func-select>`
+or :ref:`poll() <func-poll>` functions are always available.
+
+To start and stop capturing or output applications call the
+:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF
+<VIDIOC_STREAMON>` ioctl.
+
+.. note:::ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`
+   removes all buffers from both queues as a side effect. Since there is
+   no notion of doing anything "now" on a multitasking system, if an
+   application needs to synchronize with another event it should examine
+   the struct ::c:type:`v4l2_buffer` ``timestamp`` of captured
+   or outputted buffers.
+
+Drivers implementing memory mapping I/O must support the
+:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, :ref:`VIDIOC_QUERYBUF
+<VIDIOC_QUERYBUF>`, :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_DQBUF
+<VIDIOC_QBUF>`, :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`
+and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls, the :ref:`mmap()
+<func-mmap>`, :ref:`munmap() <func-munmap>`, :ref:`select()
+<func-select>` and :ref:`poll() <func-poll>` function. [#f3]_
+
+[capture example]
+
+.. [#f1]
+   One could use one file descriptor and set the buffer type field
+   accordingly when calling :ref:`VIDIOC_QBUF` etc.,
+   but it makes the :ref:`select() <func-select>` function ambiguous. We also
+   like the clean approach of one file descriptor per logical stream.
+   Video overlay for example is also a logical stream, although the CPU
+   is not needed for continuous operation.
+
+.. [#f2]
+   Random enqueue order permits applications processing images out of
+   order (such as video codecs) to return buffers earlier, reducing the
+   probability of data loss. Random fill order allows drivers to reuse
+   buffers on a LIFO-basis, taking advantage of caches holding
+   scatter-gather lists and the like.
+
+.. [#f3]
+   At the driver level :ref:`select() <func-select>` and :ref:`poll() <func-poll>` are
+   the same, and :ref:`select() <func-select>` is too important to be optional.
+   The rest should be evident.
diff --git a/Documentation/userspace-api/media/v4l/nv12mt.svg b/Documentation/userspace-api/media/v4l/nv12mt.svg
new file mode 100644
index 000000000000..d4bb4eb83f6a
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/nv12mt.svg
@@ -0,0 +1,477 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    This file is dual-licensed: you can use it either under the terms
+    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+    dual licensing only applies to this file, and not this project as a
+    whole.
+
+    a) This file is free software; you can redistribute it and/or
+       modify it under the terms of the GNU General Public License as
+       published by the Free Software Foundation version 2 of
+       the License.
+
+       This file is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+       GNU General Public License for more details.
+
+    Or, alternatively,
+
+    b) Permission is granted to copy, distribute and/or modify this
+       document under the terms of the GNU Free Documentation License,
+       Version 1.1 or any later version published by the Free Software
+       Foundation, with no Invariant Sections, no Front-Cover Texts
+       and no Back-Cover Texts. A copy of the license is included at
+       Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   version="1.2"
+   width="96.282211mm"
+   height="28.282219mm"
+   viewBox="0 0 9628.2211 2828.2219"
+   preserveAspectRatio="xMidYMid"
+   xml:space="preserve"
+   id="svg2"
+   inkscape:version="0.91 r13725"
+   sodipodi:docname="nv12mt.svg"
+   style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
+     id="metadata383"><rdf:RDF><cc:Work
+	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview381"
+     showgrid="false"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     inkscape:zoom="4.0919524"
+     inkscape:cx="170.57872"
+     inkscape:cy="50.106293"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="svg2" /><defs
+     class="ClipPathGroup"
+     id="defs4"><clipPath
+       id="presentation_clip_path"
+       clipPathUnits="userSpaceOnUse"><rect
+	 x="0"
+	 y="0"
+	 width="28000"
+	 height="21000"
+	 id="rect7" /></clipPath></defs><defs
+     id="defs9" /><defs
+     id="defs80" /><defs
+     id="defs103" /><defs
+     class="TextShapeIndex"
+     id="defs114" /><defs
+     class="EmbeddedBulletChars"
+     id="defs118" /><defs
+     class="TextEmbeddedBitmaps"
+     id="defs147" /><g
+     class="SlideGroup"
+     id="g177"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="g179"><g
+	 id="id1"
+	 class="Slide"
+	 clip-path="url(#presentation_clip_path)"><g
+	   class="Page"
+	   id="g182"><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g184"><g
+	       id="id6"><rect
+		 class="BoundingBox"
+		 x="3299"
+		 y="3199"
+		 width="2403"
+		 height="1403"
+		 id="rect187"
+		 style="fill:none;stroke:none" /><path
+		 d="m 4500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path189"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /><text
+		 class="TextShape"
+		 id="text191"><tspan
+		   class="TextParagraph"
+		   font-size="635px"
+		   font-weight="400"
+		   id="tspan193"
+		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+		     class="TextPosition"
+		     x="4325"
+		     y="4121"
+		     id="tspan195"><tspan
+		       id="tspan197"
+		       style="fill:#000000;stroke:none">0</tspan></tspan></tspan></text>
+</g></g><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g199"><g
+	       id="id7"><rect
+		 class="BoundingBox"
+		 x="5699"
+		 y="3199"
+		 width="2403"
+		 height="1403"
+		 id="rect202"
+		 style="fill:none;stroke:none" /><path
+		 d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path204"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /></g></g><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g206"><g
+	       id="id8"><rect
+		 class="BoundingBox"
+		 x="8099"
+		 y="3199"
+		 width="2403"
+		 height="1403"
+		 id="rect209"
+		 style="fill:none;stroke:none" /><path
+		 d="m 9300,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path211"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /><text
+		 class="TextShape"
+		 id="text213"><tspan
+		   class="TextParagraph"
+		   font-size="635px"
+		   font-weight="400"
+		   id="tspan215"
+		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+		     class="TextPosition"
+		     x="9125"
+		     y="4121"
+		     id="tspan217"><tspan
+		       id="tspan219"
+		       style="fill:#000000;stroke:none">6</tspan></tspan></tspan></text>
+</g></g><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g221"><g
+	       id="id9"><rect
+		 class="BoundingBox"
+		 x="5699"
+		 y="3199"
+		 width="2403"
+		 height="1403"
+		 id="rect224"
+		 style="fill:none;stroke:none" /><path
+		 d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path226"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /><text
+		 class="TextShape"
+		 id="text228"><tspan
+		   class="TextParagraph"
+		   font-size="635px"
+		   font-weight="400"
+		   id="tspan230"
+		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+		     class="TextPosition"
+		     x="6725"
+		     y="4121"
+		     id="tspan232"><tspan
+		       id="tspan234"
+		       style="fill:#000000;stroke:none">1</tspan></tspan></tspan></text>
+</g></g><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g236"><g
+	       id="id10"><rect
+		 class="BoundingBox"
+		 x="10499"
+		 y="3199"
+		 width="2403"
+		 height="1403"
+		 id="rect239"
+		 style="fill:none;stroke:none" /><path
+		 d="m 11700,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path241"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /><text
+		 class="TextShape"
+		 id="text243"><tspan
+		   class="TextParagraph"
+		   font-size="635px"
+		   font-weight="400"
+		   id="tspan245"
+		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+		     class="TextPosition"
+		     x="11525"
+		     y="4121"
+		     id="tspan247"><tspan
+		       id="tspan249"
+		       style="fill:#000000;stroke:none">7</tspan></tspan></tspan></text>
+</g></g><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g251"><g
+	       id="id11"><rect
+		 class="BoundingBox"
+		 x="3299"
+		 y="4599"
+		 width="2403"
+		 height="1403"
+		 id="rect254"
+		 style="fill:none;stroke:none" /><path
+		 d="m 4500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path256"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /><text
+		 class="TextShape"
+		 id="text258"><tspan
+		   class="TextParagraph"
+		   font-size="635px"
+		   font-weight="400"
+		   id="tspan260"
+		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+		     class="TextPosition"
+		     x="4325"
+		     y="5521"
+		     id="tspan262"><tspan
+		       id="tspan264"
+		       style="fill:#000000;stroke:none">2</tspan></tspan></tspan></text>
+</g></g><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g266"><g
+	       id="id12"><rect
+		 class="BoundingBox"
+		 x="5699"
+		 y="4599"
+		 width="2403"
+		 height="1403"
+		 id="rect269"
+		 style="fill:none;stroke:none" /><path
+		 d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path271"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /></g></g><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g273"><g
+	       id="id13"><rect
+		 class="BoundingBox"
+		 x="8099"
+		 y="4599"
+		 width="2403"
+		 height="1403"
+		 id="rect276"
+		 style="fill:none;stroke:none" /><path
+		 d="m 9300,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path278"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /><text
+		 class="TextShape"
+		 id="text280"><tspan
+		   class="TextParagraph"
+		   font-size="635px"
+		   font-weight="400"
+		   id="tspan282"
+		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+		     class="TextPosition"
+		     x="9125"
+		     y="5521"
+		     id="tspan284"><tspan
+		       id="tspan286"
+		       style="fill:#000000;stroke:none">4</tspan></tspan></tspan></text>
+</g></g><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g288"><g
+	       id="id14"><rect
+		 class="BoundingBox"
+		 x="5699"
+		 y="4599"
+		 width="2403"
+		 height="1403"
+		 id="rect291"
+		 style="fill:none;stroke:none" /><path
+		 d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path293"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /><text
+		 class="TextShape"
+		 id="text295"><tspan
+		   class="TextParagraph"
+		   font-size="635px"
+		   font-weight="400"
+		   id="tspan297"
+		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+		     class="TextPosition"
+		     x="6725"
+		     y="5521"
+		     id="tspan299"><tspan
+		       id="tspan301"
+		       style="fill:#000000;stroke:none">3</tspan></tspan></tspan></text>
+</g></g><g
+	     class="com.sun.star.drawing.CustomShape"
+	     id="g303"><g
+	       id="id15"><rect
+		 class="BoundingBox"
+		 x="10499"
+		 y="4599"
+		 width="2403"
+		 height="1403"
+		 id="rect306"
+		 style="fill:none;stroke:none" /><path
+		 d="m 11700,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+		 id="path308"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#3465a4" /><text
+		 class="TextShape"
+		 id="text310"><tspan
+		   class="TextParagraph"
+		   font-size="635px"
+		   font-weight="400"
+		   id="tspan312"
+		   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+		     class="TextPosition"
+		     x="11525"
+		     y="5521"
+		     id="tspan314"><tspan
+		       id="tspan316"
+		       style="fill:#000000;stroke:none">5</tspan></tspan></tspan></text>
+</g></g><g
+	     class="com.sun.star.drawing.LineShape"
+	     id="g318"><g
+	       id="id16"><rect
+		 class="BoundingBox"
+		 x="5199"
+		 y="3850"
+		 width="1402"
+		 height="301"
+		 id="rect321"
+		 style="fill:none;stroke:none" /><path
+		 d="m 5200,4000 970,0"
+		 id="path323"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#ff3333" /><path
+		 d="m 6600,4000 -450,-150 0,300 450,-150 z"
+		 id="path325"
+		 inkscape:connector-curvature="0"
+		 style="fill:#ff3333;stroke:none" /></g></g><g
+	     class="com.sun.star.drawing.LineShape"
+	     id="g327"><g
+	       id="id17"><rect
+		 class="BoundingBox"
+		 x="5000"
+		 y="4299"
+		 width="1202"
+		 height="802"
+		 id="rect330"
+		 style="fill:none;stroke:none" /><path
+		 d="m 6200,4300 -842,561"
+		 id="path332"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#ff3333" /><path
+		 d="m 5000,5100 458,-125 -167,-249 -291,374 z"
+		 id="path334"
+		 inkscape:connector-curvature="0"
+		 style="fill:#ff3333;stroke:none" /></g></g><g
+	     class="com.sun.star.drawing.LineShape"
+	     id="g336"><g
+	       id="id18"><rect
+		 class="BoundingBox"
+		 x="5399"
+		 y="5250"
+		 width="1202"
+		 height="301"
+		 id="rect339"
+		 style="fill:none;stroke:none" /><path
+		 d="m 5400,5400 770,0"
+		 id="path341"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#ff3333" /><path
+		 d="m 6600,5400 -450,-150 0,300 450,-150 z"
+		 id="path343"
+		 inkscape:connector-curvature="0"
+		 style="fill:#ff3333;stroke:none" /></g></g><g
+	     class="com.sun.star.drawing.LineShape"
+	     id="g345"><g
+	       id="id19"><rect
+		 class="BoundingBox"
+		 x="7599"
+		 y="5250"
+		 width="1202"
+		 height="301"
+		 id="rect348"
+		 style="fill:none;stroke:none" /><path
+		 d="m 7600,5400 770,0"
+		 id="path350"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#ff3333" /><path
+		 d="m 8800,5400 -450,-150 0,300 450,-150 z"
+		 id="path352"
+		 inkscape:connector-curvature="0"
+		 style="fill:#ff3333;stroke:none" /></g></g><g
+	     class="com.sun.star.drawing.LineShape"
+	     id="g354"><g
+	       id="id20"><rect
+		 class="BoundingBox"
+		 x="9799"
+		 y="5250"
+		 width="1402"
+		 height="301"
+		 id="rect357"
+		 style="fill:none;stroke:none" /><path
+		 d="m 9800,5400 970,0"
+		 id="path359"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#ff3333" /><path
+		 d="m 11200,5400 -450,-150 0,300 450,-150 z"
+		 id="path361"
+		 inkscape:connector-curvature="0"
+		 style="fill:#ff3333;stroke:none" /></g></g><g
+	     class="com.sun.star.drawing.LineShape"
+	     id="g363"><g
+	       id="id21"><rect
+		 class="BoundingBox"
+		 x="9900"
+		 y="4200"
+		 width="1202"
+		 height="802"
+		 id="rect366"
+		 style="fill:none;stroke:none" /><path
+		 d="m 11100,5000 -842,-561"
+		 id="path368"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#ff3333" /><path
+		 d="m 9900,4200 291,374 167,-249 -458,-125 z"
+		 id="path370"
+		 inkscape:connector-curvature="0"
+		 style="fill:#ff3333;stroke:none" /></g></g><g
+	     class="com.sun.star.drawing.LineShape"
+	     id="g372"><g
+	       id="id22"><rect
+		 class="BoundingBox"
+		 x="9999"
+		 y="3850"
+		 width="1402"
+		 height="301"
+		 id="rect375"
+		 style="fill:none;stroke:none" /><path
+		 d="m 10000,4000 970,0"
+		 id="path377"
+		 inkscape:connector-curvature="0"
+		 style="fill:none;stroke:#ff3333" /><path
+		 d="m 11400,4000 -450,-150 0,300 450,-150 z"
+		 id="path379"
+		 inkscape:connector-curvature="0"
+		 style="fill:#ff3333;stroke:none" /></g></g></g></g></g></g></svg>
diff --git a/Documentation/userspace-api/media/v4l/nv12mt_example.svg b/Documentation/userspace-api/media/v4l/nv12mt_example.svg
new file mode 100644
index 000000000000..e5075af9f45a
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/nv12mt_example.svg
@@ -0,0 +1,1616 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    This file is dual-licensed: you can use it either under the terms
+    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+    dual licensing only applies to this file, and not this project as a
+    whole.
+
+    a) This file is free software; you can redistribute it and/or
+       modify it under the terms of the GNU General Public License as
+       published by the Free Software Foundation version 2 of
+       the License.
+
+       This file is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+       GNU General Public License for more details.
+
+    Or, alternatively,
+
+    b) Permission is granted to copy, distribute and/or modify this
+       document under the terms of the GNU Free Documentation License,
+       Version 1.1 or any later version published by the Free Software
+       Foundation, with no Invariant Sections, no Front-Cover Texts
+       and no Back-Cover Texts. A copy of the license is included at
+       Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   version="1.2"
+   width="144.28223mm"
+   height="70.282227mm"
+   viewBox="0 0 14428.222 7028.2226"
+   preserveAspectRatio="xMidYMid"
+   xml:space="preserve"
+   id="svg2"
+   inkscape:version="0.91 r13725"
+   sodipodi:docname="nv12mt_example.svg"
+   style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
+     id="metadata953"><rdf:RDF><cc:Work
+	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview951"
+     showgrid="false"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     inkscape:zoom="2.7306359"
+     inkscape:cx="255.61812"
+     inkscape:cy="124.51576"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="svg2" /><defs
+     class="ClipPathGroup"
+     id="defs4" /><defs
+     id="defs9" /><defs
+     id="defs84" /><defs
+     id="defs107" /><defs
+     class="TextShapeIndex"
+     id="defs118" /><defs
+     class="EmbeddedBulletChars"
+     id="defs122" /><defs
+     class="TextEmbeddedBitmaps"
+     id="defs151" /><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g188"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id6"><rect
+	 class="BoundingBox"
+	 x="3299"
+	 y="3199"
+	 width="2403"
+	 height="1403"
+	 id="rect191"
+	 style="fill:none;stroke:none" /><path
+	 d="m 4500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path193"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text195"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan197"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="4325"
+	     y="4121"
+	     id="tspan199"><tspan
+	       id="tspan201"
+	       style="fill:#000000;stroke:none">0</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g203"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id7"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="3199"
+	 width="2403"
+	 height="1403"
+	 id="rect206"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path208"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g210"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id8"><rect
+	 class="BoundingBox"
+	 x="8099"
+	 y="3199"
+	 width="2403"
+	 height="1403"
+	 id="rect213"
+	 style="fill:none;stroke:none" /><path
+	 d="m 9300,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path215"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text217"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan219"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="9125"
+	     y="4121"
+	     id="tspan221"><tspan
+	       id="tspan223"
+	       style="fill:#000000;stroke:none">6</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g225"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id9"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="3199"
+	 width="2403"
+	 height="1403"
+	 id="rect228"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path230"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text232"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan234"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="6725"
+	     y="4121"
+	     id="tspan236"><tspan
+	       id="tspan238"
+	       style="fill:#000000;stroke:none">1</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g240"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id10"><rect
+	 class="BoundingBox"
+	 x="10499"
+	 y="3199"
+	 width="2403"
+	 height="1403"
+	 id="rect243"
+	 style="fill:none;stroke:none" /><path
+	 d="m 11700,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path245"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text247"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan249"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="11525"
+	     y="4121"
+	     id="tspan251"><tspan
+	       id="tspan253"
+	       style="fill:#000000;stroke:none">7</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g255"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id11"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="3199"
+	 width="2403"
+	 height="1403"
+	 id="rect258"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path260"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g262"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id12"><rect
+	 class="BoundingBox"
+	 x="15299"
+	 y="3199"
+	 width="2403"
+	 height="1403"
+	 id="rect265"
+	 style="fill:none;stroke:none" /><path
+	 d="m 16500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path267"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text269"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan271"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="16325"
+	     y="4121"
+	     id="tspan273"><tspan
+	       id="tspan275"
+	       style="fill:#000000;stroke:none">9</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g277"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id13"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="3199"
+	 width="2403"
+	 height="1403"
+	 id="rect280"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path282"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text284"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan286"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="13925"
+	     y="4121"
+	     id="tspan288"><tspan
+	       id="tspan290"
+	       style="fill:#000000;stroke:none">8</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g292"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id14"><rect
+	 class="BoundingBox"
+	 x="3299"
+	 y="4599"
+	 width="2403"
+	 height="1403"
+	 id="rect295"
+	 style="fill:none;stroke:none" /><path
+	 d="m 4500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path297"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text299"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan301"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="4325"
+	     y="5521"
+	     id="tspan303"><tspan
+	       id="tspan305"
+	       style="fill:#000000;stroke:none">2</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g307"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id15"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="4599"
+	 width="2403"
+	 height="1403"
+	 id="rect310"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path312"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g314"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id16"><rect
+	 class="BoundingBox"
+	 x="8099"
+	 y="4599"
+	 width="2403"
+	 height="1403"
+	 id="rect317"
+	 style="fill:none;stroke:none" /><path
+	 d="m 9300,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path319"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text321"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan323"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="9125"
+	     y="5521"
+	     id="tspan325"><tspan
+	       id="tspan327"
+	       style="fill:#000000;stroke:none">4</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g329"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id17"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="4599"
+	 width="2403"
+	 height="1403"
+	 id="rect332"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path334"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text336"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan338"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="6725"
+	     y="5521"
+	     id="tspan340"><tspan
+	       id="tspan342"
+	       style="fill:#000000;stroke:none">3</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g344"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id18"><rect
+	 class="BoundingBox"
+	 x="10499"
+	 y="4599"
+	 width="2403"
+	 height="1403"
+	 id="rect347"
+	 style="fill:none;stroke:none" /><path
+	 d="m 11700,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path349"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text351"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan353"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="11525"
+	     y="5521"
+	     id="tspan355"><tspan
+	       id="tspan357"
+	       style="fill:#000000;stroke:none">5</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g359"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id19"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="4599"
+	 width="2403"
+	 height="1403"
+	 id="rect362"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path364"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g366"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id20"><rect
+	 class="BoundingBox"
+	 x="15299"
+	 y="4599"
+	 width="2403"
+	 height="1403"
+	 id="rect369"
+	 style="fill:none;stroke:none" /><path
+	 d="m 16500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path371"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text373"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan375"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="16149"
+	     y="5521"
+	     id="tspan377"><tspan
+	       id="tspan379"
+	       style="fill:#000000;stroke:none">11</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g381"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id21"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="4599"
+	 width="2403"
+	 height="1403"
+	 id="rect384"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path386"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text388"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan390"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="13749"
+	     y="5521"
+	     id="tspan392"><tspan
+	       id="tspan394"
+	       style="fill:#000000;stroke:none">10</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g396"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id22"><rect
+	 class="BoundingBox"
+	 x="3299"
+	 y="5999"
+	 width="2403"
+	 height="1403"
+	 id="rect399"
+	 style="fill:none;stroke:none" /><path
+	 d="m 4500,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path401"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text403"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan405"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="4149"
+	     y="6921"
+	     id="tspan407"><tspan
+	       id="tspan409"
+	       style="fill:#000000;stroke:none">12</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g411"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id23"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="5999"
+	 width="2403"
+	 height="1403"
+	 id="rect414"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path416"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g418"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id24"><rect
+	 class="BoundingBox"
+	 x="8099"
+	 y="5999"
+	 width="2403"
+	 height="1403"
+	 id="rect421"
+	 style="fill:none;stroke:none" /><path
+	 d="m 9300,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path423"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text425"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan427"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="8949"
+	     y="6921"
+	     id="tspan429"><tspan
+	       id="tspan431"
+	       style="fill:#000000;stroke:none">18</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g433"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id25"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="5999"
+	 width="2403"
+	 height="1403"
+	 id="rect436"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path438"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text440"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan442"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="6549"
+	     y="6921"
+	     id="tspan444"><tspan
+	       id="tspan446"
+	       style="fill:#000000;stroke:none">13</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g448"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id26"><rect
+	 class="BoundingBox"
+	 x="10499"
+	 y="5999"
+	 width="2403"
+	 height="1403"
+	 id="rect451"
+	 style="fill:none;stroke:none" /><path
+	 d="m 11700,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path453"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text455"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan457"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="11349"
+	     y="6921"
+	     id="tspan459"><tspan
+	       id="tspan461"
+	       style="fill:#000000;stroke:none">19</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g463"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id27"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="5999"
+	 width="2403"
+	 height="1403"
+	 id="rect466"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path468"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g470"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id28"><rect
+	 class="BoundingBox"
+	 x="15299"
+	 y="5999"
+	 width="2403"
+	 height="1403"
+	 id="rect473"
+	 style="fill:none;stroke:none" /><path
+	 d="m 16500,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path475"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text477"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan479"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="16149"
+	     y="6921"
+	     id="tspan481"><tspan
+	       id="tspan483"
+	       style="fill:#000000;stroke:none">21</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g485"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id29"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="5999"
+	 width="2403"
+	 height="1403"
+	 id="rect488"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path490"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text492"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan494"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="13749"
+	     y="6921"
+	     id="tspan496"><tspan
+	       id="tspan498"
+	       style="fill:#000000;stroke:none">20</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g500"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id30"><rect
+	 class="BoundingBox"
+	 x="3299"
+	 y="7399"
+	 width="2403"
+	 height="1403"
+	 id="rect503"
+	 style="fill:none;stroke:none" /><path
+	 d="m 4500,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path505"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text507"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan509"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="4149"
+	     y="8321"
+	     id="tspan511"><tspan
+	       id="tspan513"
+	       style="fill:#000000;stroke:none">14</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g515"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id31"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="7399"
+	 width="2403"
+	 height="1403"
+	 id="rect518"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path520"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g522"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id32"><rect
+	 class="BoundingBox"
+	 x="8099"
+	 y="7399"
+	 width="2403"
+	 height="1403"
+	 id="rect525"
+	 style="fill:none;stroke:none" /><path
+	 d="m 9300,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path527"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text529"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan531"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="8949"
+	     y="8321"
+	     id="tspan533"><tspan
+	       id="tspan535"
+	       style="fill:#000000;stroke:none">16</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g537"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id33"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="7399"
+	 width="2403"
+	 height="1403"
+	 id="rect540"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path542"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text544"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan546"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="6549"
+	     y="8321"
+	     id="tspan548"><tspan
+	       id="tspan550"
+	       style="fill:#000000;stroke:none">15</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g552"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id34"><rect
+	 class="BoundingBox"
+	 x="10499"
+	 y="7399"
+	 width="2403"
+	 height="1403"
+	 id="rect555"
+	 style="fill:none;stroke:none" /><path
+	 d="m 11700,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path557"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text559"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan561"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="11349"
+	     y="8321"
+	     id="tspan563"><tspan
+	       id="tspan565"
+	       style="fill:#000000;stroke:none">17</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g567"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id35"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="7399"
+	 width="2403"
+	 height="1403"
+	 id="rect570"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path572"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g574"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id36"><rect
+	 class="BoundingBox"
+	 x="15299"
+	 y="7399"
+	 width="2403"
+	 height="1403"
+	 id="rect577"
+	 style="fill:none;stroke:none" /><path
+	 d="m 16500,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path579"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text581"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan583"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="16149"
+	     y="8321"
+	     id="tspan585"><tspan
+	       id="tspan587"
+	       style="fill:#000000;stroke:none">23</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g589"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id37"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="7399"
+	 width="2403"
+	 height="1403"
+	 id="rect592"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path594"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text596"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan598"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="13749"
+	     y="8321"
+	     id="tspan600"><tspan
+	       id="tspan602"
+	       style="fill:#000000;stroke:none">22</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g604"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id38"><rect
+	 class="BoundingBox"
+	 x="3299"
+	 y="8799"
+	 width="2403"
+	 height="1403"
+	 id="rect607"
+	 style="fill:none;stroke:none" /><path
+	 d="m 4500,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path609"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text611"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan613"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="4149"
+	     y="9721"
+	     id="tspan615"><tspan
+	       id="tspan617"
+	       style="fill:#000000;stroke:none">24</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g619"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id39"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="8799"
+	 width="2403"
+	 height="1403"
+	 id="rect622"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path624"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g626"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id40"><rect
+	 class="BoundingBox"
+	 x="8099"
+	 y="8799"
+	 width="2403"
+	 height="1403"
+	 id="rect629"
+	 style="fill:none;stroke:none" /><path
+	 d="m 9300,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path631"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text633"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan635"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="8949"
+	     y="9721"
+	     id="tspan637"><tspan
+	       id="tspan639"
+	       style="fill:#000000;stroke:none">26</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g641"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id41"><rect
+	 class="BoundingBox"
+	 x="5699"
+	 y="8799"
+	 width="2403"
+	 height="1403"
+	 id="rect644"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6900,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path646"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text648"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan650"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="6549"
+	     y="9721"
+	     id="tspan652"><tspan
+	       id="tspan654"
+	       style="fill:#000000;stroke:none">25</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g656"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id42"><rect
+	 class="BoundingBox"
+	 x="10499"
+	 y="8799"
+	 width="2403"
+	 height="1403"
+	 id="rect659"
+	 style="fill:none;stroke:none" /><path
+	 d="m 11700,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path661"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text663"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan665"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="11349"
+	     y="9721"
+	     id="tspan667"><tspan
+	       id="tspan669"
+	       style="fill:#000000;stroke:none">27</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g671"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id43"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="8799"
+	 width="2403"
+	 height="1403"
+	 id="rect674"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path676"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /></g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g678"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id44"><rect
+	 class="BoundingBox"
+	 x="15299"
+	 y="8799"
+	 width="2403"
+	 height="1403"
+	 id="rect681"
+	 style="fill:none;stroke:none" /><path
+	 d="m 16500,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path683"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text685"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan687"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="16149"
+	     y="9721"
+	     id="tspan689"><tspan
+	       id="tspan691"
+	       style="fill:#000000;stroke:none">29</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.CustomShape"
+     id="g693"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id45"><rect
+	 class="BoundingBox"
+	 x="12899"
+	 y="8799"
+	 width="2403"
+	 height="1403"
+	 id="rect696"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14100,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+	 id="path698"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#3465a4" /><text
+	 class="TextShape"
+	 id="text700"><tspan
+	   class="TextParagraph"
+	   font-size="635px"
+	   font-weight="400"
+	   id="tspan702"
+	   style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+	     class="TextPosition"
+	     x="13749"
+	     y="9721"
+	     id="tspan704"><tspan
+	       id="tspan706"
+	       style="fill:#000000;stroke:none">28</tspan></tspan></tspan></text>
+</g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g708"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id46"><rect
+	 class="BoundingBox"
+	 x="5199"
+	 y="3850"
+	 width="1402"
+	 height="301"
+	 id="rect711"
+	 style="fill:none;stroke:none" /><path
+	 d="m 5200,4000 970,0"
+	 id="path713"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 6600,4000 -450,-150 0,300 450,-150 z"
+	 id="path715"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g717"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id47"><rect
+	 class="BoundingBox"
+	 x="5000"
+	 y="4299"
+	 width="1202"
+	 height="802"
+	 id="rect720"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6200,4300 -842,561"
+	 id="path722"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 5000,5100 458,-125 -167,-249 -291,374 z"
+	 id="path724"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g726"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id48"><rect
+	 class="BoundingBox"
+	 x="5399"
+	 y="5250"
+	 width="1202"
+	 height="301"
+	 id="rect729"
+	 style="fill:none;stroke:none" /><path
+	 d="m 5400,5400 770,0"
+	 id="path731"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 6600,5400 -450,-150 0,300 450,-150 z"
+	 id="path733"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g735"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id49"><rect
+	 class="BoundingBox"
+	 x="7599"
+	 y="5250"
+	 width="1202"
+	 height="301"
+	 id="rect738"
+	 style="fill:none;stroke:none" /><path
+	 d="m 7600,5400 770,0"
+	 id="path740"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 8800,5400 -450,-150 0,300 450,-150 z"
+	 id="path742"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g744"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id50"><rect
+	 class="BoundingBox"
+	 x="9799"
+	 y="5250"
+	 width="1402"
+	 height="301"
+	 id="rect747"
+	 style="fill:none;stroke:none" /><path
+	 d="m 9800,5400 970,0"
+	 id="path749"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 11200,5400 -450,-150 0,300 450,-150 z"
+	 id="path751"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g753"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id51"><rect
+	 class="BoundingBox"
+	 x="9900"
+	 y="4200"
+	 width="1202"
+	 height="802"
+	 id="rect756"
+	 style="fill:none;stroke:none" /><path
+	 d="m 11100,5000 -842,-561"
+	 id="path758"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 9900,4200 291,374 167,-249 -458,-125 z"
+	 id="path760"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g762"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id52"><rect
+	 class="BoundingBox"
+	 x="9999"
+	 y="3850"
+	 width="1402"
+	 height="301"
+	 id="rect765"
+	 style="fill:none;stroke:none" /><path
+	 d="m 10000,4000 970,0"
+	 id="path767"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 11400,4000 -450,-150 0,300 450,-150 z"
+	 id="path769"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g771"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id53"><rect
+	 class="BoundingBox"
+	 x="12399"
+	 y="3850"
+	 width="1202"
+	 height="301"
+	 id="rect774"
+	 style="fill:none;stroke:none" /><path
+	 d="m 12400,4000 770,0"
+	 id="path776"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 13600,4000 -450,-150 0,300 450,-150 z"
+	 id="path778"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g780"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id54"><rect
+	 class="BoundingBox"
+	 x="14799"
+	 y="3850"
+	 width="1202"
+	 height="301"
+	 id="rect783"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14800,4000 770,0"
+	 id="path785"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 16000,4000 -450,-150 0,300 450,-150 z"
+	 id="path787"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g789"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id55"><rect
+	 class="BoundingBox"
+	 x="14400"
+	 y="4399"
+	 width="1402"
+	 height="602"
+	 id="rect792"
+	 style="fill:none;stroke:none" /><path
+	 d="m 15800,4400 -1005,431"
+	 id="path794"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 14400,5000 473,-39 -118,-276 -355,315 z"
+	 id="path796"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g798"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id56"><rect
+	 class="BoundingBox"
+	 x="14599"
+	 y="5250"
+	 width="1402"
+	 height="301"
+	 id="rect801"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14600,5400 970,0"
+	 id="path803"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 16000,5400 -450,-150 0,300 450,-150 z"
+	 id="path805"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g807"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id57"><rect
+	 class="BoundingBox"
+	 x="5199"
+	 y="6550"
+	 width="1402"
+	 height="301"
+	 id="rect810"
+	 style="fill:none;stroke:none" /><path
+	 d="m 5200,6700 970,0"
+	 id="path812"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 6600,6700 -450,-150 0,300 450,-150 z"
+	 id="path814"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g816"
+     transform="translate(-3285.889,-3129.4446)"><g
+       id="id58"><rect
+	 class="BoundingBox"
+	 x="5000"
+	 y="6999"
+	 width="1202"
+	 height="802"
+	 id="rect819"
+	 style="fill:none;stroke:none" /><path
+	 d="m 6200,7000 -842,561"
+	 id="path821"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 5000,7800 458,-125 -167,-249 -291,374 z"
+	 id="path823"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g825"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id59"><rect
+	 class="BoundingBox"
+	 x="5399"
+	 y="7950"
+	 width="1202"
+	 height="301"
+	 id="rect828"
+	 style="fill:none;stroke:none" /><path
+	 d="m 5400,8100 770,0"
+	 id="path830"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 6600,8100 -450,-150 0,300 450,-150 z"
+	 id="path832"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g834"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id60"><rect
+	 class="BoundingBox"
+	 x="7599"
+	 y="7950"
+	 width="1202"
+	 height="301"
+	 id="rect837"
+	 style="fill:none;stroke:none" /><path
+	 d="m 7600,8100 770,0"
+	 id="path839"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 8800,8100 -450,-150 0,300 450,-150 z"
+	 id="path841"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g843"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id61"><rect
+	 class="BoundingBox"
+	 x="9799"
+	 y="7950"
+	 width="1402"
+	 height="301"
+	 id="rect846"
+	 style="fill:none;stroke:none" /><path
+	 d="m 9800,8100 970,0"
+	 id="path848"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 11200,8100 -450,-150 0,300 450,-150 z"
+	 id="path850"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g852"
+     transform="translate(-3285.889,-3129.4446)"><g
+       id="id62"><rect
+	 class="BoundingBox"
+	 x="9900"
+	 y="6900"
+	 width="1202"
+	 height="802"
+	 id="rect855"
+	 style="fill:none;stroke:none" /><path
+	 d="m 11100,7700 -842,-561"
+	 id="path857"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 9900,6900 291,374 167,-249 -458,-125 z"
+	 id="path859"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g861"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id63"><rect
+	 class="BoundingBox"
+	 x="9999"
+	 y="6550"
+	 width="1402"
+	 height="301"
+	 id="rect864"
+	 style="fill:none;stroke:none" /><path
+	 d="m 10000,6700 970,0"
+	 id="path866"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 11400,6700 -450,-150 0,300 450,-150 z"
+	 id="path868"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g870"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id64"><rect
+	 class="BoundingBox"
+	 x="12399"
+	 y="6550"
+	 width="1202"
+	 height="301"
+	 id="rect873"
+	 style="fill:none;stroke:none" /><path
+	 d="m 12400,6700 770,0"
+	 id="path875"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 13600,6700 -450,-150 0,300 450,-150 z"
+	 id="path877"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g879"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id65"><rect
+	 class="BoundingBox"
+	 x="14799"
+	 y="6550"
+	 width="1202"
+	 height="301"
+	 id="rect882"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14800,6700 770,0"
+	 id="path884"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 16000,6700 -450,-150 0,300 450,-150 z"
+	 id="path886"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g888"
+     transform="translate(-3285.889,-3129.4446)"><g
+       id="id66"><rect
+	 class="BoundingBox"
+	 x="14400"
+	 y="7099"
+	 width="1402"
+	 height="602"
+	 id="rect891"
+	 style="fill:none;stroke:none" /><path
+	 d="m 15800,7100 -1005,431"
+	 id="path893"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 14400,7700 473,-39 -118,-276 -355,315 z"
+	 id="path895"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g897"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id67"><rect
+	 class="BoundingBox"
+	 x="14599"
+	 y="7950"
+	 width="1402"
+	 height="301"
+	 id="rect900"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14600,8100 970,0"
+	 id="path902"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 16000,8100 -450,-150 0,300 450,-150 z"
+	 id="path904"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g906"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id68"><rect
+	 class="BoundingBox"
+	 x="5399"
+	 y="9450"
+	 width="1202"
+	 height="301"
+	 id="rect909"
+	 style="fill:none;stroke:none" /><path
+	 d="m 5400,9600 770,0"
+	 id="path911"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 6600,9600 -450,-150 0,300 450,-150 z"
+	 id="path913"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g915"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id69"><rect
+	 class="BoundingBox"
+	 x="7599"
+	 y="9450"
+	 width="1202"
+	 height="301"
+	 id="rect918"
+	 style="fill:none;stroke:none" /><path
+	 d="m 7600,9600 770,0"
+	 id="path920"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 8800,9600 -450,-150 0,300 450,-150 z"
+	 id="path922"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g924"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id70"><rect
+	 class="BoundingBox"
+	 x="9999"
+	 y="9450"
+	 width="1202"
+	 height="301"
+	 id="rect927"
+	 style="fill:none;stroke:none" /><path
+	 d="m 10000,9600 770,0"
+	 id="path929"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 11200,9600 -450,-150 0,300 450,-150 z"
+	 id="path931"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g933"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id71"><rect
+	 class="BoundingBox"
+	 x="12399"
+	 y="9450"
+	 width="1202"
+	 height="301"
+	 id="rect936"
+	 style="fill:none;stroke:none" /><path
+	 d="m 12400,9600 770,0"
+	 id="path938"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 13600,9600 -450,-150 0,300 450,-150 z"
+	 id="path940"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g><g
+     class="com.sun.star.drawing.LineShape"
+     id="g942"
+     transform="translate(-3285.889,-3185.889)"><g
+       id="id72"><rect
+	 class="BoundingBox"
+	 x="14799"
+	 y="9450"
+	 width="1202"
+	 height="301"
+	 id="rect945"
+	 style="fill:none;stroke:none" /><path
+	 d="m 14800,9600 770,0"
+	 id="path947"
+	 inkscape:connector-curvature="0"
+	 style="fill:none;stroke:#ff3333" /><path
+	 d="m 16000,9600 -450,-150 0,300 450,-150 z"
+	 id="path949"
+	 inkscape:connector-curvature="0"
+	 style="fill:#ff3333;stroke:none" /></g></g></svg>
diff --git a/Documentation/userspace-api/media/v4l/open.rst b/Documentation/userspace-api/media/v4l/open.rst
new file mode 100644
index 000000000000..38046ef20141
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/open.rst
@@ -0,0 +1,165 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _open:
+
+***************************
+Opening and Closing Devices
+***************************
+
+
+Device Naming
+=============
+
+V4L2 drivers are implemented as kernel modules, loaded manually by the
+system administrator or automatically when a device is first discovered.
+The driver modules plug into the "videodev" kernel module. It provides
+helper functions and a common application interface specified in this
+document.
+
+Each driver thus loaded registers one or more device nodes with major
+number 81 and a minor number between 0 and 255. Minor numbers are
+allocated dynamically unless the kernel is compiled with the kernel
+option CONFIG_VIDEO_FIXED_MINOR_RANGES. In that case minor numbers
+are allocated in ranges depending on the device node type (video, radio,
+etc.).
+
+Many drivers support "video_nr", "radio_nr" or "vbi_nr" module
+options to select specific video/radio/vbi node numbers. This allows the
+user to request that the device node is named e.g. /dev/video5 instead
+of leaving it to chance. When the driver supports multiple devices of
+the same type more than one device node number can be assigned,
+separated by commas:
+
+.. code-block:: none
+
+   # modprobe mydriver video_nr=0,1 radio_nr=0,1
+
+In ``/etc/modules.conf`` this may be written as:
+
+::
+
+    options mydriver video_nr=0,1 radio_nr=0,1
+
+When no device node number is given as module option the driver supplies
+a default.
+
+Normally udev will create the device nodes in /dev automatically for
+you. If udev is not installed, then you need to enable the
+CONFIG_VIDEO_FIXED_MINOR_RANGES kernel option in order to be able to
+correctly relate a minor number to a device node number. I.e., you need
+to be certain that minor number 5 maps to device node name video5. With
+this kernel option different device types have different minor number
+ranges. These ranges are listed in :ref:`devices`.
+
+The creation of character special files (with mknod) is a privileged
+operation and devices cannot be opened by major and minor number. That
+means applications cannot *reliably* scan for loaded or installed
+drivers. The user must enter a device name, or the application can try
+the conventional device names.
+
+
+.. _related:
+
+Related Devices
+===============
+
+Devices can support several functions. For example video capturing, VBI
+capturing and radio support.
+
+The V4L2 API creates different nodes for each of these functions.
+
+The V4L2 API was designed with the idea that one device node could
+support all functions. However, in practice this never worked: this
+'feature' was never used by applications and many drivers did not
+support it and if they did it was certainly never tested. In addition,
+switching a device node between different functions only works when
+using the streaming I/O API, not with the
+:ref:`read() <func-read>`/\ :ref:`write() <func-write>` API.
+
+Today each device node supports just one function.
+
+Besides video input or output the hardware may also support audio
+sampling or playback. If so, these functions are implemented as ALSA PCM
+devices with optional ALSA audio mixer devices.
+
+One problem with all these devices is that the V4L2 API makes no
+provisions to find these related devices. Some really complex devices
+use the Media Controller (see :ref:`media_controller`) which can be
+used for this purpose. But most drivers do not use it, and while some
+code exists that uses sysfs to discover related devices (see
+libmedia_dev in the
+`v4l-utils <http://git.linuxtv.org/cgit.cgi/v4l-utils.git/>`__ git
+repository), there is no library yet that can provide a single API
+towards both Media Controller-based devices and devices that do not use
+the Media Controller. If you want to work on this please write to the
+linux-media mailing list:
+`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__.
+
+
+Multiple Opens
+==============
+
+V4L2 devices can be opened more than once. [#f1]_ When this is supported
+by the driver, users can for example start a "panel" application to
+change controls like brightness or audio volume, while another
+application captures video and audio. In other words, panel applications
+are comparable to an ALSA audio mixer application. Just opening a V4L2
+device should not change the state of the device. [#f2]_
+
+Once an application has allocated the memory buffers needed for
+streaming data (by calling the :ref:`VIDIOC_REQBUFS`
+or :ref:`VIDIOC_CREATE_BUFS` ioctls, or
+implicitly by calling the :ref:`read() <func-read>` or
+:ref:`write() <func-write>` functions) that application (filehandle)
+becomes the owner of the device. It is no longer allowed to make changes
+that would affect the buffer sizes (e.g. by calling the
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl) and other applications are
+no longer allowed to allocate buffers or start or stop streaming. The
+EBUSY error code will be returned instead.
+
+Merely opening a V4L2 device does not grant exclusive access. [#f3]_
+Initiating data exchange however assigns the right to read or write the
+requested type of data, and to change related properties, to this file
+descriptor. Applications can request additional access privileges using
+the priority mechanism described in :ref:`app-pri`.
+
+
+Shared Data Streams
+===================
+
+V4L2 drivers should not support multiple applications reading or writing
+the same data stream on a device by copying buffers, time multiplexing
+or similar means. This is better handled by a proxy application in user
+space.
+
+
+Functions
+=========
+
+To open and close V4L2 devices applications use the
+:ref:`open() <func-open>` and :ref:`close() <func-close>` function,
+respectively. Devices are programmed using the
+:ref:`ioctl() <func-ioctl>` function as explained in the following
+sections.
+
+.. [#f1]
+   There are still some old and obscure drivers that have not been
+   updated to allow for multiple opens. This implies that for such
+   drivers :ref:`open() <func-open>` can return an ``EBUSY`` error code
+   when the device is already in use.
+
+.. [#f2]
+   Unfortunately, opening a radio device often switches the state of the
+   device to radio mode in many drivers. This behavior should be fixed
+   eventually as it violates the V4L2 specification.
+
+.. [#f3]
+   Drivers could recognize the ``O_EXCL`` open flag. Presently this is
+   not required, so applications cannot know if it really works.
diff --git a/Documentation/userspace-api/media/v4l/pipeline.dot b/Documentation/userspace-api/media/v4l/pipeline.dot
new file mode 100644
index 000000000000..8c53ce719a14
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pipeline.dot
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+
+digraph board {
+	rankdir=TB
+	colorscheme=x11
+	scaler [label="{<scaler_0> 0} | Host\nScaler | {<scaler_1> 1} ", shape=Mrecord, style=filled, fillcolor=lightblue]
+	frontend [label="{<frontend_0> 0} | Host\nFrontend | {<frontend_1> 1}", shape=Mrecord, style=filled, fillcolor=lightblue]
+	sensor [label="Sensor | {<sensor_0> 0}", shape=Mrecord, style=filled, fillcolor=aquamarine]
+	io [label="{<io_0> 0} | V4L I/O", shape=Mrecord, style=filled, fillcolor=aquamarine]
+
+	sensor:sensor_0 -> frontend:frontend_0 [color=blue, label="HQ: 2592x1968\nHS: 1296x984"]
+	frontend:frontend_1 -> scaler:scaler_0 [color=blue, label="HQ: 2592x1968\nHS: 1296x984"]
+	scaler:scaler_1 -> io:io_0 [color=blue, label="HQ: 1280x720\nHS: 1280x720"]
+}
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst b/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst
new file mode 100644
index 000000000000..be9a8385ebc1
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst
@@ -0,0 +1,39 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _pixfmt-bayer:
+
+*****************
+Raw Bayer Formats
+*****************
+
+Description
+===========
+
+The raw Bayer formats are used by image sensors before much if any processing is
+performed on the image. The formats contain green, red and blue components, with
+alternating lines of red and green, and blue and green pixels in different
+orders. See also `the Wikipedia article on Bayer filter
+<https://en.wikipedia.org/wiki/Bayer_filter>`__.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    pixfmt-srggb8
+    pixfmt-srggb10
+    pixfmt-srggb10p
+    pixfmt-srggb10alaw8
+    pixfmt-srggb10dpcm8
+    pixfmt-srggb10-ipu3
+    pixfmt-srggb12
+    pixfmt-srggb12p
+    pixfmt-srggb14
+    pixfmt-srggb14p
+    pixfmt-srggb16
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-cnf4.rst b/Documentation/userspace-api/media/v4l/pixfmt-cnf4.rst
new file mode 100644
index 000000000000..8f469290c304
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-cnf4.rst
@@ -0,0 +1,31 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _V4L2-PIX-FMT-CNF4:
+
+******************************
+V4L2_PIX_FMT_CNF4 ('CNF4')
+******************************
+
+Depth sensor confidence information as a 4 bits per pixel packed array
+
+Description
+===========
+
+Proprietary format used by Intel RealSense Depth cameras containing depth
+confidence information in range 0-15 with 0 indicating that the sensor was
+unable to resolve any signal and 15 indicating maximum level of confidence for
+the specific sensor (actual error margins might change from sensor to sensor).
+
+Every two consecutive pixels are packed into a single byte.
+Bits 0-3 of byte n refer to confidence value of depth pixel 2*n,
+bits 4-7 to confidence value of depth pixel 2*n+1.
+
+**Bit-packed representation.**
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 64 64
+
+    * - Y'\ :sub:`01[3:0]`\ (bits 7--4) Y'\ :sub:`00[3:0]`\ (bits 3--0)
+      - Y'\ :sub:`03[3:0]`\ (bits 7--4) Y'\ :sub:`02[3:0]`\ (bits 3--0)
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
new file mode 100644
index 000000000000..3828bb79225d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
@@ -0,0 +1,232 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+******************
+Compressed Formats
+******************
+
+
+.. _compressed-formats:
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. flat-table:: Compressed Image Formats
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - Identifier
+      - Code
+      - Details
+    * .. _V4L2-PIX-FMT-JPEG:
+
+      - ``V4L2_PIX_FMT_JPEG``
+      - 'JPEG'
+      - TBD. See also :ref:`VIDIOC_G_JPEGCOMP <VIDIOC_G_JPEGCOMP>`,
+	:ref:`VIDIOC_S_JPEGCOMP <VIDIOC_G_JPEGCOMP>`.
+    * .. _V4L2-PIX-FMT-MPEG:
+
+      - ``V4L2_PIX_FMT_MPEG``
+      - 'MPEG'
+      - MPEG multiplexed stream. The actual format is determined by
+	extended control ``V4L2_CID_MPEG_STREAM_TYPE``, see
+	:ref:`mpeg-control-id`.
+    * .. _V4L2-PIX-FMT-H264:
+
+      - ``V4L2_PIX_FMT_H264``
+      - 'H264'
+      - H264 Access Unit.
+	The decoder expects one Access Unit per buffer.
+	The encoder generates one Access Unit per buffer.
+	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
+	then the decoder has no requirements since it can parse all the
+	information from the raw bytestream.
+    * .. _V4L2-PIX-FMT-H264-NO-SC:
+
+      - ``V4L2_PIX_FMT_H264_NO_SC``
+      - 'AVC1'
+      - H264 video elementary stream without start codes.
+    * .. _V4L2-PIX-FMT-H264-MVC:
+
+      - ``V4L2_PIX_FMT_H264_MVC``
+      - 'M264'
+      - H264 MVC video elementary stream.
+    * .. _V4L2-PIX-FMT-H264-SLICE:
+
+      - ``V4L2_PIX_FMT_H264_SLICE``
+      - 'S264'
+      - H264 parsed slice data, including slice headers, either with or
+	without the start code, as extracted from the H264 bitstream.
+	This format is adapted for stateless video decoders that implement an
+	H264 pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
+	This pixelformat has two modifiers that must be set at least once
+	through the ``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE``
+        and ``V4L2_CID_MPEG_VIDEO_H264_START_CODE`` controls.
+	In addition, metadata associated with the frame to decode are
+	required to be passed through the ``V4L2_CID_MPEG_VIDEO_H264_SPS``,
+	``V4L2_CID_MPEG_VIDEO_H264_PPS``,
+	``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``,
+	``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` and
+	``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS`` controls.  See the
+	:ref:`associated Codec Control IDs <v4l2-mpeg-h264>`.  Exactly
+	one output and one capture buffer must be provided for use
+	with this pixel format. The output buffer must contain the
+	appropriate number of macroblocks to decode a full
+	corresponding frame to the matching capture buffer.
+
+	The syntax for this format is documented in :ref:`h264`, section
+	7.3.2.8 "Slice layer without partitioning RBSP syntax" and the following
+	sections.
+
+	.. note::
+
+	   This format is not yet part of the public kernel API and it
+	   is expected to change.
+
+    * .. _V4L2-PIX-FMT-H263:
+
+      - ``V4L2_PIX_FMT_H263``
+      - 'H263'
+      - H263 video elementary stream.
+    * .. _V4L2-PIX-FMT-MPEG1:
+
+      - ``V4L2_PIX_FMT_MPEG1``
+      - 'MPG1'
+      - MPEG1 Picture. Each buffer starts with a Picture header, followed
+	by other headers as needed and ending with the Picture data.
+	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
+	then the decoder has no requirements since it can parse all the
+	information from the raw bytestream.
+    * .. _V4L2-PIX-FMT-MPEG2:
+
+      - ``V4L2_PIX_FMT_MPEG2``
+      - 'MPG2'
+      - MPEG2 Picture. Each buffer starts with a Picture header, followed
+	by other headers as needed and ending with the Picture data.
+	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
+	then the decoder has no requirements since it can parse all the
+	information from the raw bytestream.
+    * .. _V4L2-PIX-FMT-MPEG2-SLICE:
+
+      - ``V4L2_PIX_FMT_MPEG2_SLICE``
+      - 'MG2S'
+      - MPEG-2 parsed slice data, as extracted from the MPEG-2 bitstream.
+	This format is adapted for stateless video decoders that implement a
+	MPEG-2 pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
+	Metadata associated with the frame to decode is required to be passed
+	through the ``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS`` control and
+	quantization matrices can optionally be specified through the
+	``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION`` control.
+	See the :ref:`associated Codec Control IDs <v4l2-mpeg-mpeg2>`.
+	Exactly one output and one capture buffer must be provided for use with
+	this pixel format. The output buffer must contain the appropriate number
+	of macroblocks to decode a full corresponding frame to the matching
+	capture buffer.
+    * .. _V4L2-PIX-FMT-MPEG4:
+
+      - ``V4L2_PIX_FMT_MPEG4``
+      - 'MPG4'
+      - MPEG4 video elementary stream.
+    * .. _V4L2-PIX-FMT-XVID:
+
+      - ``V4L2_PIX_FMT_XVID``
+      - 'XVID'
+      - Xvid video elementary stream.
+    * .. _V4L2-PIX-FMT-VC1-ANNEX-G:
+
+      - ``V4L2_PIX_FMT_VC1_ANNEX_G``
+      - 'VC1G'
+      - VC1, SMPTE 421M Annex G compliant stream.
+    * .. _V4L2-PIX-FMT-VC1-ANNEX-L:
+
+      - ``V4L2_PIX_FMT_VC1_ANNEX_L``
+      - 'VC1L'
+      - VC1, SMPTE 421M Annex L compliant stream.
+    * .. _V4L2-PIX-FMT-VP8:
+
+      - ``V4L2_PIX_FMT_VP8``
+      - 'VP80'
+      - VP8 compressed video frame. The encoder generates one
+	compressed frame per buffer, and the decoder requires one
+	compressed frame per buffer.
+    * .. _V4L2-PIX-FMT-VP8-FRAME:
+
+      - ``V4L2_PIX_FMT_VP8_FRAME``
+      - 'VP8F'
+      - VP8 parsed frame, as extracted from the container.
+	This format is adapted for stateless video decoders that implement a
+	VP8 pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
+	Metadata associated with the frame to decode is required to be passed
+	through the ``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER`` control.
+	See the :ref:`associated Codec Control IDs <v4l2-mpeg-vp8>`.
+	Exactly one output and one capture buffer must be provided for use with
+	this pixel format. The output buffer must contain the appropriate number
+	of macroblocks to decode a full corresponding frame to the matching
+	capture buffer.
+
+	.. note::
+
+	   This format is not yet part of the public kernel API and it
+	   is expected to change.
+
+    * .. _V4L2-PIX-FMT-VP9:
+
+      - ``V4L2_PIX_FMT_VP9``
+      - 'VP90'
+      - VP9 compressed video frame. The encoder generates one
+	compressed frame per buffer, and the decoder requires one
+	compressed frame per buffer.
+    * .. _V4L2-PIX-FMT-HEVC:
+
+      - ``V4L2_PIX_FMT_HEVC``
+      - 'HEVC'
+      - HEVC/H.265 Access Unit.
+	The decoder expects one Access Unit per buffer.
+	The encoder generates one Access Unit per buffer.
+	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
+	then the decoder has no	requirements since it can parse all the
+	information from the raw bytestream.
+    * .. _V4L2-PIX-FMT-HEVC-SLICE:
+
+      - ``V4L2_PIX_FMT_HEVC_SLICE``
+      - 'S265'
+      - HEVC parsed slice data, as extracted from the HEVC bitstream.
+	This format is adapted for stateless video decoders that implement a
+	HEVC pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
+	This pixelformat has two modifiers that must be set at least once
+	through the ``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE``
+        and ``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE`` controls.
+	Metadata associated with the frame to decode is required to be passed
+	through the following controls :
+        * ``V4L2_CID_MPEG_VIDEO_HEVC_SPS``
+        * ``V4L2_CID_MPEG_VIDEO_HEVC_PPS``
+        * ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS``
+	See the :ref:`associated Codec Control IDs <v4l2-mpeg-hevc>`.
+	Buffers associated with this pixel format must contain the appropriate
+	number of macroblocks to decode a full corresponding frame.
+
+	.. note::
+
+	   This format is not yet part of the public kernel API and it
+	   is expected to change.
+    * .. _V4L2-PIX-FMT-FWHT:
+
+      - ``V4L2_PIX_FMT_FWHT``
+      - 'FWHT'
+      - Video elementary stream using a codec based on the Fast Walsh Hadamard
+        Transform. This codec is implemented by the vicodec ('Virtual Codec')
+	driver. See the codec-fwht.h header for more details.
+	:ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
+	since the decoder can parse all the information from the raw bytestream.
+    * .. _V4L2-PIX-FMT-FWHT-STATELESS:
+
+      - ``V4L2_PIX_FMT_FWHT_STATELESS``
+      - 'SFWH'
+      - Same format as V4L2_PIX_FMT_FWHT but requires stateless codec implementation.
+	See the :ref:`associated Codec Control IDs <v4l2-mpeg-fwht>`.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-grey.rst b/Documentation/userspace-api/media/v4l/pixfmt-grey.rst
new file mode 100644
index 000000000000..7b03db3393be
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-grey.rst
@@ -0,0 +1,51 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-GREY:
+
+**************************
+V4L2_PIX_FMT_GREY ('GREY')
+**************************
+
+Grey-scale image
+
+
+Description
+===========
+
+This is a grey-scale image. It is really a degenerate Y'CbCr format
+which simply contains no Cb or Cr data.
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst b/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst
new file mode 100644
index 000000000000..d0d46ed27260
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _pixfmt-indexed:
+
+**************
+Indexed Format
+**************
+
+In this format each pixel is represented by an 8 bit index into a 256
+entry ARGB palette. It is intended for
+:ref:`Video Output Overlays <osd>` only. There are no ioctls to access
+the palette, this must be done with ioctls of the Linux framebuffer API.
+
+
+
+.. flat-table:: Indexed Image Format
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`7` Byte 0
+    * -
+      -
+      - Bit
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _V4L2-PIX-FMT-PAL8:
+
+      - ``V4L2_PIX_FMT_PAL8``
+      - 'PAL8'
+      -
+      - i\ :sub:`7`
+      - i\ :sub:`6`
+      - i\ :sub:`5`
+      - i\ :sub:`4`
+      - i\ :sub:`3`
+      - i\ :sub:`2`
+      - i\ :sub:`1`
+      - i\ :sub:`0`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-intro.rst b/Documentation/userspace-api/media/v4l/pixfmt-intro.rst
new file mode 100644
index 000000000000..af870895f653
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-intro.rst
@@ -0,0 +1,58 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+**********************
+Standard Image Formats
+**********************
+
+In order to exchange images between drivers and applications, it is
+necessary to have standard image data formats which both sides will
+interpret the same way. V4L2 includes several such formats, and this
+section is intended to be an unambiguous specification of the standard
+image data formats in V4L2.
+
+V4L2 drivers are not limited to these formats, however. Driver-specific
+formats are possible. In that case the application may depend on a codec
+to convert images to one of the standard formats when needed. But the
+data can still be stored and retrieved in the proprietary format. For
+example, a device may support a proprietary compressed format.
+Applications can still capture and save the data in the compressed
+format, saving much disk space, and later use a codec to convert the
+images to the X Windows screen format when the video is to be displayed.
+
+Even so, ultimately, some standard formats are needed, so the V4L2
+specification would not be complete without well-defined standard
+formats.
+
+The V4L2 standard formats are mainly uncompressed formats. The pixels
+are always arranged in memory from left to right, and from top to
+bottom. The first byte of data in the image buffer is always for the
+leftmost pixel of the topmost row. Following that is the pixel
+immediately to its right, and so on until the end of the top row of
+pixels. Following the rightmost pixel of the row there may be zero or
+more bytes of padding to guarantee that each row of pixel data has a
+certain alignment. Following the pad bytes, if any, is data for the
+leftmost pixel of the second row from the top, and so on. The last row
+has just as many pad bytes after it as the other rows.
+
+In V4L2 each format has an identifier which looks like ``PIX_FMT_XXX``,
+defined in the :ref:`videodev2.h <videodev>` header file. These
+identifiers represent
+:ref:`four character (FourCC) codes <v4l2-fourcc>` which are also
+listed below, however they are not the same as those used in the Windows
+world.
+
+For some formats, data is stored in separate, discontiguous memory
+buffers. Those formats are identified by a separate set of FourCC codes
+and are referred to as "multi-planar formats". For example, a
+:ref:`YUV422 <V4L2-PIX-FMT-YUV422M>` frame is normally stored in one
+memory buffer, but it can also be placed in two or three separate
+buffers, with Y component in one buffer and CbCr components in another
+in the 2-planar version or with each component in its own buffer in the
+3-planar case. Those sub-buffers are referred to as "*planes*".
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst b/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst
new file mode 100644
index 000000000000..f85cccb71741
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst
@@ -0,0 +1,89 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-INZI:
+
+**************************
+V4L2_PIX_FMT_INZI ('INZI')
+**************************
+
+Infrared 10-bit linked with Depth 16-bit images
+
+
+Description
+===========
+
+Proprietary multi-planar format used by Intel SR300 Depth cameras, comprise of
+Infrared image followed by Depth data. The pixel definition is 32-bpp,
+with the Depth and Infrared Data split into separate continuous planes of
+identical dimensions.
+
+
+
+The first plane - Infrared data - is stored according to
+:ref:`V4L2_PIX_FMT_Y10 <V4L2-PIX-FMT-Y10>` greyscale format.
+Each pixel is 16-bit cell, with actual data stored in the 10 LSBs
+with values in range 0 to 1023.
+The six remaining MSBs are padded with zeros.
+
+
+The second plane provides 16-bit per-pixel Depth data arranged in
+:ref:`V4L2-PIX-FMT-Z16 <V4L2-PIX-FMT-Z16>` format.
+
+
+**Frame Structure.**
+Each cell is a 16-bit word with more significant data stored at higher
+memory address (byte order is little-endian).
+
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{2.5cm}|p{2.5cm}|p{2.5cm}|p{2.5cm}|p{2.5cm}|p{2.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 1
+    :widths:    1 1 1 1 1 1
+
+    * - Ir\ :sub:`0,0`
+      - Ir\ :sub:`0,1`
+      - Ir\ :sub:`0,2`
+      - ...
+      - ...
+      - ...
+    * - :cspan:`5` ...
+    * - :cspan:`5` Infrared Data
+    * - :cspan:`5` ...
+    * - ...
+      - ...
+      - ...
+      - Ir\ :sub:`n-1,n-3`
+      - Ir\ :sub:`n-1,n-2`
+      - Ir\ :sub:`n-1,n-1`
+    * - Depth\ :sub:`0,0`
+      - Depth\ :sub:`0,1`
+      - Depth\ :sub:`0,2`
+      - ...
+      - ...
+      - ...
+    * - :cspan:`5` ...
+    * - :cspan:`5` Depth Data
+    * - :cspan:`5` ...
+    * - ...
+      - ...
+      - ...
+      - Depth\ :sub:`n-1,n-3`
+      - Depth\ :sub:`n-1,n-2`
+      - Depth\ :sub:`n-1,n-1`
+
+.. raw:: latex
+
+    \normalsize
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-m420.rst b/Documentation/userspace-api/media/v4l/pixfmt-m420.rst
new file mode 100644
index 000000000000..5180bbe16c6e
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-m420.rst
@@ -0,0 +1,133 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-M420:
+
+**************************
+V4L2_PIX_FMT_M420 ('M420')
+**************************
+
+Format with ½ horizontal and vertical chroma resolution, also known as
+YUV 4:2:0. Hybrid plane line-interleaved layout.
+
+
+Description
+===========
+
+M420 is a YUV format with ½ horizontal and vertical chroma subsampling
+(YUV 4:2:0). Pixels are organized as interleaved luma and chroma planes.
+Two lines of luma data are followed by one line of chroma data.
+
+The luma plane has one byte per pixel. The chroma plane contains
+interleaved CbCr pixels subsampled by ½ in the horizontal and vertical
+directions. Each CbCr pair belongs to four pixels. For example,
+Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`,
+Y'\ :sub:`10`, Y'\ :sub:`11`.
+
+All line lengths are identical: if the Y lines include pad bytes so do
+the CbCr lines.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start + 8:
+      - Cb\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Cb\ :sub:`01`
+      - Cr\ :sub:`01`
+    * - start + 16:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start + 20:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * - start + 24:
+      - Cb\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Cb\ :sub:`11`
+      - Cr\ :sub:`11`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * - 1
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+    * - 2
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * - 3
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst
new file mode 100644
index 000000000000..4eaf2f9086a9
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst
@@ -0,0 +1,220 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-meta-fmt-d4xx:
+
+*******************************
+V4L2_META_FMT_D4XX ('D4XX')
+*******************************
+
+Intel D4xx UVC Cameras Metadata
+
+
+Description
+===========
+
+Intel D4xx (D435 and other) cameras include per-frame metadata in their UVC
+payload headers, following the Microsoft(R) UVC extension proposal [1_]. That
+means, that the private D4XX metadata, following the standard UVC header, is
+organised in blocks. D4XX cameras implement several standard block types,
+proposed by Microsoft, and several proprietary ones. Supported standard metadata
+types are MetadataId_CaptureStats (ID 3), MetadataId_CameraExtrinsics (ID 4),
+and MetadataId_CameraIntrinsics (ID 5). For their description see [1_]. This
+document describes proprietary metadata types, used by D4xx cameras.
+
+V4L2_META_FMT_D4XX buffers follow the metadata buffer layout of
+V4L2_META_FMT_UVC with the only difference, that it also includes proprietary
+payload header data. D4xx cameras use bulk transfers and only send one payload
+per frame, therefore their headers cannot be larger than 255 bytes.
+
+Below are proprietary Microsoft style metadata types, used by D4xx cameras,
+where all fields are in little endian order:
+
+.. tabularcolumns:: |p{5.0cm}|p{12.5cm}|
+
+
+.. flat-table:: D4xx metadata
+    :widths: 1 2
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - **Field**
+      - **Description**
+    * - :cspan:`1` *Depth Control*
+    * - __u32 ID
+      - 0x80000000
+    * - __u32 Size
+      - Size in bytes (currently 56)
+    * - __u32 Version
+      - Version of this structure. The documentation herein corresponds to
+        version xxx. The version number will be incremented when new fields are
+        added.
+    * - __u32 Flags
+      - A bitmask of flags: see [2_] below
+    * - __u32 Gain
+      - Gain value in internal units, same as the V4L2_CID_GAIN control, used to
+	capture the frame
+    * - __u32 Exposure
+      - Exposure time (in microseconds) used to capture the frame
+    * - __u32 Laser power
+      - Power of the laser LED 0-360, used for depth measurement
+    * - __u32 AE mode
+      - 0: manual; 1: automatic exposure
+    * - __u32 Exposure priority
+      - Exposure priority value: 0 - constant frame rate
+    * - __u32 AE ROI left
+      - Left border of the AE Region of Interest (all ROI values are in pixels
+	and lie between 0 and maximum width or height respectively)
+    * - __u32 AE ROI right
+      - Right border of the AE Region of Interest
+    * - __u32 AE ROI top
+      - Top border of the AE Region of Interest
+    * - __u32 AE ROI bottom
+      - Bottom border of the AE Region of Interest
+    * - __u32 Preset
+      - Preset selector value, default: 0, unless changed by the user
+    * - __u32 Laser mode
+      - 0: off, 1: on
+    * - :cspan:`1` *Capture Timing*
+    * - __u32 ID
+      - 0x80000001
+    * - __u32 Size
+      - Size in bytes (currently 40)
+    * - __u32 Version
+      - Version of this structure. The documentation herein corresponds to
+        version xxx. The version number will be incremented when new fields are
+        added.
+    * - __u32 Flags
+      - A bitmask of flags: see [3_] below
+    * - __u32 Frame counter
+      - Monotonically increasing counter
+    * - __u32 Optical time
+      - Time in microseconds from the beginning of a frame till its middle
+    * - __u32 Readout time
+      - Time, used to read out a frame in microseconds
+    * - __u32 Exposure time
+      - Frame exposure time in microseconds
+    * - __u32 Frame interval
+      - In microseconds = 1000000 / framerate
+    * - __u32 Pipe latency
+      - Time in microseconds from start of frame to data in USB buffer
+    * - :cspan:`1` *Configuration*
+    * - __u32 ID
+      - 0x80000002
+    * - __u32 Size
+      - Size in bytes (currently 40)
+    * - __u32 Version
+      - Version of this structure. The documentation herein corresponds to
+        version xxx. The version number will be incremented when new fields are
+        added.
+    * - __u32 Flags
+      - A bitmask of flags: see [4_] below
+    * - __u8 Hardware type
+      - Camera hardware version [5_]
+    * - __u8 SKU ID
+      - Camera hardware configuration [6_]
+    * - __u32 Cookie
+      - Internal synchronisation
+    * - __u16 Format
+      - Image format code [7_]
+    * - __u16 Width
+      - Width in pixels
+    * - __u16 Height
+      - Height in pixels
+    * - __u16 Framerate
+      - Requested frame rate per second
+    * - __u16 Trigger
+      - Byte 0: bit 0: depth and RGB are synchronised, bit 1: external trigger
+
+.. _1:
+
+[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5
+
+.. _2:
+
+[2] Depth Control flags specify which fields are valid: ::
+
+  0x00000001 Gain
+  0x00000002 Exposure
+  0x00000004 Laser power
+  0x00000008 AE mode
+  0x00000010 Exposure priority
+  0x00000020 AE ROI
+  0x00000040 Preset
+
+.. _3:
+
+[3] Capture Timing flags specify which fields are valid: ::
+
+  0x00000001 Frame counter
+  0x00000002 Optical time
+  0x00000004 Readout time
+  0x00000008 Exposure time
+  0x00000010 Frame interval
+  0x00000020 Pipe latency
+
+.. _4:
+
+[4] Configuration flags specify which fields are valid: ::
+
+  0x00000001 Hardware type
+  0x00000002 SKU ID
+  0x00000004 Cookie
+  0x00000008 Format
+  0x00000010 Width
+  0x00000020 Height
+  0x00000040 Framerate
+  0x00000080 Trigger
+  0x00000100 Cal count
+
+.. _5:
+
+[5] Camera model: ::
+
+  0 DS5
+  1 IVCAM2
+
+.. _6:
+
+[6] 8-bit camera hardware configuration bitfield: ::
+
+  [1:0] depthCamera
+	00: no depth
+	01: standard depth
+	10: wide depth
+	11: reserved
+  [2]   depthIsActive - has a laser projector
+  [3]   RGB presence
+  [4]   Inertial Measurement Unit (IMU) presence
+  [5]   projectorType
+	0: HPTG
+	1: Princeton
+  [6]   0: a projector, 1: an LED
+  [7]   reserved
+
+.. _7:
+
+[7] Image format codes per video streaming interface:
+
+Depth: ::
+
+  1 Z16
+  2 Z
+
+Left sensor: ::
+
+  1 Y8
+  2 UYVY
+  3 R8L8
+  4 Calibration
+  5 W10
+
+Fish Eye sensor: ::
+
+  1 RAW8
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst
new file mode 100644
index 000000000000..97a9a2925671
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst
@@ -0,0 +1,104 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License version
+..    2.0 as published by the Free Software Foundation.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License version 2.0 for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-meta-fmt-params:
+.. _v4l2-meta-fmt-stat-3a:
+
+******************************************************************
+V4L2_META_FMT_IPU3_PARAMS ('ip3p'), V4L2_META_FMT_IPU3_3A ('ip3s')
+******************************************************************
+
+.. ipu3_uapi_stats_3a
+
+3A statistics
+=============
+
+The IPU3 ImgU 3A statistics accelerators collect different statistics over
+an input Bayer frame. Those statistics are obtained from the "ipu3-imgu [01] 3a
+stat" metadata capture video nodes, using the :c:type:`v4l2_meta_format`
+interface. They are formatted as described by the :c:type:`ipu3_uapi_stats_3a`
+structure.
+
+The statistics collected are AWB (Auto-white balance) RGBS (Red, Green, Blue and
+Saturation measure) cells, AWB filter response, AF (Auto-focus) filter response,
+and AE (Auto-exposure) histogram.
+
+The struct :c:type:`ipu3_uapi_4a_config` saves all configurable parameters.
+
+.. code-block:: c
+
+	struct ipu3_uapi_stats_3a {
+		struct ipu3_uapi_awb_raw_buffer awb_raw_buffer;
+		struct ipu3_uapi_ae_raw_buffer_aligned ae_raw_buffer[IPU3_UAPI_MAX_STRIPES];
+		struct ipu3_uapi_af_raw_buffer af_raw_buffer;
+		struct ipu3_uapi_awb_fr_raw_buffer awb_fr_raw_buffer;
+		struct ipu3_uapi_4a_config stats_4a_config;
+		__u32 ae_join_buffers;
+		__u8 padding[28];
+		struct ipu3_uapi_stats_3a_bubble_info_per_stripe stats_3a_bubble_per_stripe;
+		struct ipu3_uapi_ff_status stats_3a_status;
+	};
+
+.. ipu3_uapi_params
+
+Pipeline parameters
+===================
+
+The pipeline parameters are passed to the "ipu3-imgu [01] parameters" metadata
+output video nodes, using the :c:type:`v4l2_meta_format` interface. They are
+formatted as described by the :c:type:`ipu3_uapi_params` structure.
+
+Both 3A statistics and pipeline parameters described here are closely tied to
+the underlying camera sub-system (CSS) APIs. They are usually consumed and
+produced by dedicated user space libraries that comprise the important tuning
+tools, thus freeing the developers from being bothered with the low level
+hardware and algorithm details.
+
+.. code-block:: c
+
+	struct ipu3_uapi_params {
+		/* Flags which of the settings below are to be applied */
+		struct ipu3_uapi_flags use;
+
+		/* Accelerator cluster parameters */
+		struct ipu3_uapi_acc_param acc_param;
+
+		/* ISP vector address space parameters */
+		struct ipu3_uapi_isp_lin_vmem_params lin_vmem_params;
+		struct ipu3_uapi_isp_tnr3_vmem_params tnr3_vmem_params;
+		struct ipu3_uapi_isp_xnr3_vmem_params xnr3_vmem_params;
+
+		/* ISP data memory (DMEM) parameters */
+		struct ipu3_uapi_isp_tnr3_params tnr3_dmem_params;
+		struct ipu3_uapi_isp_xnr3_params xnr3_dmem_params;
+
+		/* Optical black level compensation */
+		struct ipu3_uapi_obgrid_param obgrid_param;
+	};
+
+Intel IPU3 ImgU uAPI data types
+===============================
+
+.. kernel-doc:: drivers/staging/media/ipu3/include/intel-ipu3.h
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst
new file mode 100644
index 000000000000..debc50285a25
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst
@@ -0,0 +1,58 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-meta-fmt-uvc:
+
+*******************************
+V4L2_META_FMT_UVC ('UVCH')
+*******************************
+
+UVC Payload Header Data
+
+
+Description
+===========
+
+This format describes standard UVC metadata, extracted from UVC packet headers
+and provided by the UVC driver through metadata video nodes. That data includes
+exact copies of the standard part of UVC Payload Header contents and auxiliary
+timing information, required for precise interpretation of timestamps, contained
+in those headers. See section "2.4.3.3 Video and Still Image Payload Headers" of
+the "UVC 1.5 Class specification" for details.
+
+Each UVC payload header can be between 2 and 12 bytes large. Buffers can
+contain multiple headers, if multiple such headers have been transmitted by the
+camera for the respective frame. However, the driver may drop headers when the
+buffer is full, when they contain no useful information (e.g. those without the
+SCR field or with that field identical to the previous header), or generally to
+perform rate limiting when the device sends a large number of headers.
+
+Each individual block contains the following fields:
+
+.. flat-table:: UVC Metadata Block
+    :widths: 1 4
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Field
+      - Description
+    * - __u64 ts;
+      - system timestamp in host byte order, measured by the driver upon
+        reception of the payload
+    * - __u16 sof;
+      - USB Frame Number in host byte order, also obtained by the driver as
+        close as possible to the above timestamp to enable correlation between
+        them
+    * - :cspan:`1` *The rest is an exact copy of the UVC payload header:*
+    * - __u8 length;
+      - length of the rest of the block, including this field
+    * - __u8 flags;
+      - Flags, indicating presence of other standard UVC fields
+    * - __u8 buf[];
+      - The rest of the header, possibly including UVC PTS and SCR fields
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst
new file mode 100644
index 000000000000..34a2382ef91c
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst
@@ -0,0 +1,60 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation version 2 of
+..    the License.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-meta-fmt-vivid:
+
+*******************************
+V4L2_META_FMT_VIVID ('VIVD')
+*******************************
+
+VIVID Metadata Format
+
+
+Description
+===========
+
+This describes metadata format used by the vivid driver.
+
+It sets Brightness, Saturation, Contrast and Hue, each of which maps to
+corresponding controls of the vivid driver with respect to the range and default values.
+
+It contains the following fields:
+
+.. flat-table:: VIVID Metadata
+    :widths: 1 4
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Field
+      - Description
+    * - u16 brightness;
+      - Image brightness, the value is in the range 0 to 255, with the default value as 128.
+    * - u16 contrast;
+      - Image contrast, the value is in the range 0 to 255, with the default value as 128.
+    * - u16 saturation;
+      - Image color saturation, the value is in the range 0 to 255, with the default value as 128.
+    * - s16 hue;
+      - Image color balance, the value is in the range -128 to 128, with the default value as 0.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst
new file mode 100644
index 000000000000..b780e447dd4b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst
@@ -0,0 +1,175 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-meta-fmt-vsp1-hgo:
+
+*******************************
+V4L2_META_FMT_VSP1_HGO ('VSPH')
+*******************************
+
+Renesas R-Car VSP1 1-D Histogram Data
+
+
+Description
+===========
+
+This format describes histogram data generated by the Renesas R-Car VSP1 1-D
+Histogram (HGO) engine.
+
+The VSP1 HGO is a histogram computation engine that can operate on RGB, YCrCb
+or HSV data. It operates on a possibly cropped and subsampled input image and
+computes the minimum, maximum and sum of all pixels as well as per-channel
+histograms.
+
+The HGO can compute histograms independently per channel, on the maximum of the
+three channels (RGB data only) or on the Y channel only (YCbCr only). It can
+additionally output the histogram with 64 or 256 bins, resulting in four
+possible modes of operation.
+
+- In *64 bins normal mode*, the HGO operates on the three channels independently
+  to compute three 64-bins histograms. RGB, YCbCr and HSV image formats are
+  supported.
+- In *64 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
+  channels to compute a single 64-bins histogram. Only the RGB image format is
+  supported.
+- In *256 bins normal mode*, the HGO operates on the Y channel to compute a
+  single 256-bins histogram. Only the YCbCr image format is supported.
+- In *256 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
+  channels to compute a single 256-bins histogram. Only the RGB image format is
+  supported.
+
+**Byte Order.**
+All data is stored in memory in little endian format. Each cell in the tables
+contains one byte.
+
+.. flat-table:: VSP1 HGO Data - 64 Bins, Normal Mode (792 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      -
+      - R/Cr/H max [7:0]
+      -
+      - R/Cr/H min [7:0]
+    * - 4
+      -
+      - G/Y/S max [7:0]
+      -
+      - G/Y/S min [7:0]
+    * - 8
+      -
+      - B/Cb/V max [7:0]
+      -
+      - B/Cb/V min [7:0]
+    * - 12
+      - :cspan:`4` R/Cr/H sum [31:0]
+    * - 16
+      - :cspan:`4` G/Y/S sum [31:0]
+    * - 20
+      - :cspan:`4` B/Cb/V sum [31:0]
+    * - 24
+      - :cspan:`4` R/Cr/H bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 276
+      - :cspan:`4` R/Cr/H bin 63 [31:0]
+    * - 280
+      - :cspan:`4` G/Y/S bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 532
+      - :cspan:`4` G/Y/S bin 63 [31:0]
+    * - 536
+      - :cspan:`4` B/Cb/V bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 788
+      - :cspan:`4` B/Cb/V bin 63 [31:0]
+
+.. flat-table:: VSP1 HGO Data - 64 Bins, Max Mode (264 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      -
+      - max(R,G,B) max [7:0]
+      -
+      - max(R,G,B) min [7:0]
+    * - 4
+      - :cspan:`4` max(R,G,B) sum [31:0]
+    * - 8
+      - :cspan:`4` max(R,G,B) bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 260
+      - :cspan:`4` max(R,G,B) bin 63 [31:0]
+
+.. flat-table:: VSP1 HGO Data - 256 Bins, Normal Mode (1032 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      -
+      - Y max [7:0]
+      -
+      - Y min [7:0]
+    * - 4
+      - :cspan:`4` Y sum [31:0]
+    * - 8
+      - :cspan:`4` Y bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 1028
+      - :cspan:`4` Y bin 255 [31:0]
+
+.. flat-table:: VSP1 HGO Data - 256 Bins, Max Mode (1032 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      -
+      - max(R,G,B) max [7:0]
+      -
+      - max(R,G,B) min [7:0]
+    * - 4
+      - :cspan:`4` max(R,G,B) sum [31:0]
+    * - 8
+      - :cspan:`4` max(R,G,B) bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 1028
+      - :cspan:`4` max(R,G,B) bin 255 [31:0]
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst
new file mode 100644
index 000000000000..e165320cc1ff
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst
@@ -0,0 +1,136 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-meta-fmt-vsp1-hgt:
+
+*******************************
+V4L2_META_FMT_VSP1_HGT ('VSPT')
+*******************************
+
+Renesas R-Car VSP1 2-D Histogram Data
+
+
+Description
+===========
+
+This format describes histogram data generated by the Renesas R-Car VSP1
+2-D Histogram (HGT) engine.
+
+The VSP1 HGT is a histogram computation engine that operates on HSV
+data. It operates on a possibly cropped and subsampled input image and
+computes the sum, maximum and minimum of the S component as well as a
+weighted frequency histogram based on the H and S components.
+
+The histogram is a matrix of 6 Hue and 32 Saturation buckets, 192 in
+total. Each HSV value is added to one or more buckets with a weight
+between 1 and 16 depending on the Hue areas configuration. Finding the
+corresponding buckets is done by inspecting the H and S value independently.
+
+The Saturation position **n** (0 - 31) of the bucket in the matrix is
+found by the expression:
+
+    n = S / 8
+
+The Hue position **m** (0 - 5) of the bucket in the matrix depends on
+how the HGT Hue areas are configured. There are 6 user configurable Hue
+Areas which can be configured to cover overlapping Hue values:
+
+.. raw:: latex
+
+    \small
+
+::
+
+         Area 0       Area 1       Area 2       Area 3       Area 4       Area 5
+        ________     ________     ________     ________     ________     ________
+   \   /|      |\   /|      |\   /|      |\   /|      |\   /|      |\   /|      |\   /
+    \ / |      | \ / |      | \ / |      | \ / |      | \ / |      | \ / |      | \ /
+     X  |      |  X  |      |  X  |      |  X  |      |  X  |      |  X  |      |  X
+    / \ |      | / \ |      | / \ |      | / \ |      | / \ |      | / \ |      | / \
+   /   \|      |/   \|      |/   \|      |/   \|      |/   \|      |/   \|      |/   \
+  5U   0L      0U   1L      1U   2L      2U   3L      3U   4L      4U   5L      5U   0L
+        <0..............................Hue Value............................255>
+
+
+.. raw:: latex
+
+    \normalsize
+
+When two consecutive areas don't overlap (n+1L is equal to nU) the boundary
+value is considered as part of the lower area.
+
+Pixels with a hue value included in the centre of an area (between nL and nU
+included) are attributed to that single area and given a weight of 16. Pixels
+with a hue value included in the overlapping region between two areas (between
+n+1L and nU excluded) are attributed to both areas and given a weight for each
+of these areas proportional to their position along the diagonal lines
+(rounded down).
+
+The Hue area setup must match one of the following constrains:
+
+::
+
+    0L <= 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U
+
+::
+
+    0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U <= 0L
+
+**Byte Order.**
+All data is stored in memory in little endian format. Each cell in the tables
+contains one byte.
+
+.. flat-table:: VSP1 HGT Data - (776 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      - -
+      - S max [7:0]
+      - -
+      - S min [7:0]
+    * - 4
+      - :cspan:`4` S sum [31:0]
+    * - 8
+      - :cspan:`4` Histogram bucket (m=0, n=0) [31:0]
+    * - 12
+      - :cspan:`4` Histogram bucket (m=0, n=1) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 132
+      - :cspan:`4` Histogram bucket (m=0, n=31) [31:0]
+    * - 136
+      - :cspan:`4` Histogram bucket (m=1, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 264
+      - :cspan:`4` Histogram bucket (m=2, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 392
+      - :cspan:`4` Histogram bucket (m=3, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 520
+      - :cspan:`4` Histogram bucket (m=4, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 648
+      - :cspan:`4` Histogram bucket (m=5, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 772
+      - :cspan:`4` Histogram bucket (m=5, n=31) [31:0]
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv12.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv12.rst
new file mode 100644
index 000000000000..19d47b38e02a
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-nv12.rst
@@ -0,0 +1,136 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-NV12:
+.. _V4L2-PIX-FMT-NV21:
+
+******************************************************
+V4L2_PIX_FMT_NV12 ('NV12'), V4L2_PIX_FMT_NV21 ('NV21')
+******************************************************
+
+
+V4L2_PIX_FMT_NV21
+Formats with ½ horizontal and vertical chroma resolution, also known as
+YUV 4:2:0. One luminance and one chrominance plane with alternating
+chroma samples as opposed to ``V4L2_PIX_FMT_YVU420``
+
+
+Description
+===========
+
+These are two-plane versions of the YUV 4:2:0 format. The three
+components are separated into two sub-images or planes. The Y plane is
+first. The Y plane has one byte per pixel. For ``V4L2_PIX_FMT_NV12``, a
+combined CbCr plane immediately follows the Y plane in memory. The CbCr
+plane is the same width, in bytes, as the Y plane (and of the image),
+but is half as tall in pixels. Each CbCr pair belongs to four pixels.
+For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`,
+Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`. ``V4L2_PIX_FMT_NV21`` is
+the same except the Cb and Cr bytes are swapped, the CrCb plane starts
+with a Cr byte.
+
+If the Y plane has pad bytes after each row, then the CbCr plane has as
+many pad bytes after its rows.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * - start + 16:
+      - Cb\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Cb\ :sub:`01`
+      - Cr\ :sub:`01`
+    * - start + 20:
+      - Cb\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Cb\ :sub:`11`
+      - Cr\ :sub:`11`
+
+
+**Color Sample Location:**
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * - 1
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+    * - 2
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * - 3
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv12m.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv12m.rst
new file mode 100644
index 000000000000..115ea603c13f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-nv12m.rst
@@ -0,0 +1,151 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-NV12M:
+.. _v4l2-pix-fmt-nv12mt-16x16:
+.. _V4L2-PIX-FMT-NV21M:
+
+***********************************************************************************
+V4L2_PIX_FMT_NV12M ('NM12'), V4L2_PIX_FMT_NV21M ('NM21'), V4L2_PIX_FMT_NV12MT_16X16
+***********************************************************************************
+
+
+V4L2_PIX_FMT_NV21M
+V4L2_PIX_FMT_NV12MT_16X16
+Variation of ``V4L2_PIX_FMT_NV12`` and ``V4L2_PIX_FMT_NV21`` with planes
+non contiguous in memory.
+
+
+Description
+===========
+
+This is a multi-planar, two-plane version of the YUV 4:2:0 format. The
+three components are separated into two sub-images or planes.
+``V4L2_PIX_FMT_NV12M`` differs from ``V4L2_PIX_FMT_NV12`` in that the
+two planes are non-contiguous in memory, i.e. the chroma plane do not
+necessarily immediately follows the luma plane. The luminance data
+occupies the first plane. The Y plane has one byte per pixel. In the
+second plane there is a chrominance data with alternating chroma
+samples. The CbCr plane is the same width, in bytes, as the Y plane (and
+of the image), but is half as tall in pixels. Each CbCr pair belongs to
+four pixels. For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to
+Y'\ :sub:`00`, Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
+``V4L2_PIX_FMT_NV12MT_16X16`` is the tiled version of
+``V4L2_PIX_FMT_NV12M`` with 16x16 macroblock tiles. Here pixels are
+arranged in 16x16 2D tiles and tiles are arranged in linear order in
+memory. ``V4L2_PIX_FMT_NV21M`` is the same as ``V4L2_PIX_FMT_NV12M``
+except the Cb and Cr bytes are swapped, the CrCb plane starts with a Cr
+byte.
+
+``V4L2_PIX_FMT_NV12M`` is intended to be used only in drivers and
+applications that support the multi-planar API, described in
+:ref:`planar-apis`.
+
+If the Y plane has pad bytes after each row, then the CbCr plane has as
+many pad bytes after its rows.
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start0 + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start0 + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start0 + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start0 + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * -
+    * - start1 + 0:
+      - Cb\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Cb\ :sub:`01`
+      - Cr\ :sub:`01`
+    * - start1 + 4:
+      - Cb\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Cb\ :sub:`11`
+      - Cr\ :sub:`11`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * - 1
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+    * - 2
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      -
+      - C
+      -
+    * - 3
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv12mt.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv12mt.rst
new file mode 100644
index 000000000000..daac1c16d4f2
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-nv12mt.rst
@@ -0,0 +1,67 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-NV12MT:
+
+****************************
+V4L2_PIX_FMT_NV12MT ('TM12')
+****************************
+
+Formats with ½ horizontal and vertical chroma resolution. This format
+has two planes - one for luminance and one for chrominance. Chroma
+samples are interleaved. The difference to ``V4L2_PIX_FMT_NV12`` is the
+memory layout. Pixels are grouped in macroblocks of 64x32 size. The
+order of macroblocks in memory is also not standard.
+
+
+Description
+===========
+
+This is the two-plane versions of the YUV 4:2:0 format where data is
+grouped into 64x32 macroblocks. The three components are separated into
+two sub-images or planes. The Y plane has one byte per pixel and pixels
+are grouped into 64x32 macroblocks. The CbCr plane has the same width,
+in bytes, as the Y plane (and the image), but is half as tall in pixels.
+The chroma plane is also grouped into 64x32 macroblocks.
+
+Width of the buffer has to be aligned to the multiple of 128, and height
+alignment is 32. Every four adjacent buffers - two horizontally and two
+vertically are grouped together and are located in memory in Z or
+flipped Z order.
+
+Layout of macroblocks in memory is presented in the following figure.
+
+
+.. _nv12mt:
+
+.. kernel-figure:: nv12mt.svg
+    :alt:    nv12mt.svg
+    :align:  center
+
+    V4L2_PIX_FMT_NV12MT macroblock Z shape memory layout
+
+The requirement that width is multiple of 128 is implemented because,
+the Z shape cannot be cut in half horizontally. In case the vertical
+resolution of macroblocks is odd then the last row of macroblocks is
+arranged in a linear order.
+
+In case of chroma the layout is identical. Cb and Cr samples are
+interleaved. Height of the buffer is aligned to 32.
+
+
+.. _nv12mt_ex:
+
+.. kernel-figure:: nv12mt_example.svg
+    :alt:    nv12mt_example.svg
+    :align:  center
+
+    Example V4L2_PIX_FMT_NV12MT memory layout of macroblocks
+
+Memory layout of macroblocks of ``V4L2_PIX_FMT_NV12MT`` format in most
+extreme case.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv16.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv16.rst
new file mode 100644
index 000000000000..977636fc98d6
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-nv16.rst
@@ -0,0 +1,160 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-NV16:
+.. _V4L2-PIX-FMT-NV61:
+
+******************************************************
+V4L2_PIX_FMT_NV16 ('NV16'), V4L2_PIX_FMT_NV61 ('NV61')
+******************************************************
+
+V4L2_PIX_FMT_NV61
+Formats with ½ horizontal chroma resolution, also known as YUV 4:2:2.
+One luminance and one chrominance plane with alternating chroma samples
+as opposed to ``V4L2_PIX_FMT_YVU420``
+
+
+Description
+===========
+
+These are two-plane versions of the YUV 4:2:2 format. The three
+components are separated into two sub-images or planes. The Y plane is
+first. The Y plane has one byte per pixel. For ``V4L2_PIX_FMT_NV16``, a
+combined CbCr plane immediately follows the Y plane in memory. The CbCr
+plane is the same width and height, in bytes, as the Y plane (and of the
+image). Each CbCr pair belongs to two pixels. For example,
+Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`.
+``V4L2_PIX_FMT_NV61`` is the same except the Cb and Cr bytes are
+swapped, the CrCb plane starts with a Cr byte.
+
+If the Y plane has pad bytes after each row, then the CbCr plane has as
+many pad bytes after its rows.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * - start + 16:
+      - Cb\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Cb\ :sub:`01`
+      - Cr\ :sub:`01`
+    * - start + 20:
+      - Cb\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Cb\ :sub:`11`
+      - Cr\ :sub:`11`
+    * - start + 24:
+      - Cb\ :sub:`20`
+      - Cr\ :sub:`20`
+      - Cb\ :sub:`21`
+      - Cr\ :sub:`21`
+    * - start + 28:
+      - Cb\ :sub:`30`
+      - Cr\ :sub:`30`
+      - Cb\ :sub:`31`
+      - Cr\ :sub:`31`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * - 1
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * -
+    * - 2
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * - 3
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv16m.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv16m.rst
new file mode 100644
index 000000000000..cf33942d942d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-nv16m.rst
@@ -0,0 +1,164 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-NV16M:
+.. _v4l2-pix-fmt-nv61m:
+
+********************************************************
+V4L2_PIX_FMT_NV16M ('NM16'), V4L2_PIX_FMT_NV61M ('NM61')
+********************************************************
+
+V4L2_PIX_FMT_NV61M
+Variation of ``V4L2_PIX_FMT_NV16`` and ``V4L2_PIX_FMT_NV61`` with planes
+non contiguous in memory.
+
+
+Description
+===========
+
+This is a multi-planar, two-plane version of the YUV 4:2:2 format. The
+three components are separated into two sub-images or planes.
+``V4L2_PIX_FMT_NV16M`` differs from ``V4L2_PIX_FMT_NV16`` in that the
+two planes are non-contiguous in memory, i.e. the chroma plane does not
+necessarily immediately follow the luma plane. The luminance data
+occupies the first plane. The Y plane has one byte per pixel. In the
+second plane there is chrominance data with alternating chroma samples.
+The CbCr plane is the same width and height, in bytes, as the Y plane.
+Each CbCr pair belongs to two pixels. For example,
+Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`.
+``V4L2_PIX_FMT_NV61M`` is the same as ``V4L2_PIX_FMT_NV16M`` except the
+Cb and Cr bytes are swapped, the CrCb plane starts with a Cr byte.
+
+``V4L2_PIX_FMT_NV16M`` and ``V4L2_PIX_FMT_NV61M`` are intended to be
+used only in drivers and applications that support the multi-planar API,
+described in :ref:`planar-apis`.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start0 + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start0 + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start0 + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start0 + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * -
+    * - start1 + 0:
+      - Cb\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Cb\ :sub:`02`
+      - Cr\ :sub:`02`
+    * - start1 + 4:
+      - Cb\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Cb\ :sub:`12`
+      - Cr\ :sub:`12`
+    * - start1 + 8:
+      - Cb\ :sub:`20`
+      - Cr\ :sub:`20`
+      - Cb\ :sub:`22`
+      - Cr\ :sub:`22`
+    * - start1 + 12:
+      - Cb\ :sub:`30`
+      - Cr\ :sub:`30`
+      - Cb\ :sub:`32`
+      - Cr\ :sub:`32`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * - 1
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * -
+    * - 2
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
+    * - 3
+      - Y
+      -
+      - Y
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      - C
+      -
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv24.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv24.rst
new file mode 100644
index 000000000000..c6fb97bd0472
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-nv24.rst
@@ -0,0 +1,102 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-NV24:
+.. _V4L2-PIX-FMT-NV42:
+
+******************************************************
+V4L2_PIX_FMT_NV24 ('NV24'), V4L2_PIX_FMT_NV42 ('NV42')
+******************************************************
+
+V4L2_PIX_FMT_NV42
+Formats with full horizontal and vertical chroma resolutions, also known
+as YUV 4:4:4. One luminance and one chrominance plane with alternating
+chroma samples as opposed to ``V4L2_PIX_FMT_YVU420``
+
+
+Description
+===========
+
+These are two-plane versions of the YUV 4:4:4 format. The three
+components are separated into two sub-images or planes. The Y plane is
+first, with each Y sample stored in one byte per pixel. For
+``V4L2_PIX_FMT_NV24``, a combined CbCr plane immediately follows the Y
+plane in memory. The CbCr plane has the same width and height, in
+pixels, as the Y plane (and the image). Each line contains one CbCr pair
+per pixel, with each Cb and Cr sample stored in one byte.
+``V4L2_PIX_FMT_NV42`` is the same except that the Cb and Cr samples are
+swapped, the CrCb plane starts with a Cr sample.
+
+If the Y plane has pad bytes after each row, then the CbCr plane has
+twice as many pad bytes after its rows.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * - start + 16:
+      - Cb\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Cb\ :sub:`01`
+      - Cr\ :sub:`01`
+      - Cb\ :sub:`02`
+      - Cr\ :sub:`02`
+      - Cb\ :sub:`03`
+      - Cr\ :sub:`03`
+    * - start + 24:
+      - Cb\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Cb\ :sub:`11`
+      - Cr\ :sub:`11`
+      - Cb\ :sub:`12`
+      - Cr\ :sub:`12`
+      - Cb\ :sub:`13`
+      - Cr\ :sub:`13`
+    * - start + 32:
+      - Cb\ :sub:`20`
+      - Cr\ :sub:`20`
+      - Cb\ :sub:`21`
+      - Cr\ :sub:`21`
+      - Cb\ :sub:`22`
+      - Cr\ :sub:`22`
+      - Cb\ :sub:`23`
+      - Cr\ :sub:`23`
+    * - start + 40:
+      - Cb\ :sub:`30`
+      - Cr\ :sub:`30`
+      - Cb\ :sub:`31`
+      - Cr\ :sub:`31`
+      - Cb\ :sub:`32`
+      - Cr\ :sub:`32`
+      - Cb\ :sub:`33`
+      - Cr\ :sub:`33`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst
new file mode 100644
index 000000000000..b8c9b0225eea
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst
@@ -0,0 +1,164 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _packed-hsv:
+
+******************
+Packed HSV formats
+******************
+
+Description
+===========
+
+The *hue* (h) is measured in degrees, the equivalence between degrees and LSBs
+depends on the hsv-encoding used, see :ref:`colorspaces`.
+The *saturation* (s) and the *value* (v) are measured in percentage of the
+cylinder: 0 being the smallest value and 255 the maximum.
+
+
+The values are packed in 24 or 32 bit formats.
+
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{2.6cm}|p{0.8cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _packed-hsv-formats:
+
+.. flat-table:: Packed HSV Image Formats
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`7` Byte 0 in memory
+      - :cspan:`7` Byte 1
+      - :cspan:`7` Byte 2
+      - :cspan:`7` Byte 3
+    * -
+      -
+      - Bit
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _V4L2-PIX-FMT-HSV32:
+
+      - ``V4L2_PIX_FMT_HSV32``
+      - 'HSV4'
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+
+      - h\ :sub:`7`
+      - h\ :sub:`6`
+      - h\ :sub:`5`
+      - h\ :sub:`4`
+      - h\ :sub:`3`
+      - h\ :sub:`2`
+      - h\ :sub:`1`
+      - h\ :sub:`0`
+
+      - s\ :sub:`7`
+      - s\ :sub:`6`
+      - s\ :sub:`5`
+      - s\ :sub:`4`
+      - s\ :sub:`3`
+      - s\ :sub:`2`
+      - s\ :sub:`1`
+      - s\ :sub:`0`
+
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _V4L2-PIX-FMT-HSV24:
+
+      - ``V4L2_PIX_FMT_HSV24``
+      - 'HSV3'
+      -
+      - h\ :sub:`7`
+      - h\ :sub:`6`
+      - h\ :sub:`5`
+      - h\ :sub:`4`
+      - h\ :sub:`3`
+      - h\ :sub:`2`
+      - h\ :sub:`1`
+      - h\ :sub:`0`
+
+      - s\ :sub:`7`
+      - s\ :sub:`6`
+      - s\ :sub:`5`
+      - s\ :sub:`4`
+      - s\ :sub:`3`
+      - s\ :sub:`2`
+      - s\ :sub:`1`
+      - s\ :sub:`0`
+
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      -
+
+.. raw:: latex
+
+    \endgroup
+
+Bit 7 is the most significant bit.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst
new file mode 100644
index 000000000000..bbd4bd094deb
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst
@@ -0,0 +1,380 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _packed-yuv:
+
+******************
+Packed YUV formats
+******************
+
+Description
+===========
+
+Similar to the packed RGB formats these formats store the Y, Cb and Cr
+component of each pixel in one 16 or 32 bit word.
+
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. _packed-yuv-formats:
+
+.. tabularcolumns:: |p{2.5cm}|p{0.69cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|
+
+.. flat-table:: Packed YUV Image Formats
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+
+      - :cspan:`7` Byte 0 in memory
+
+      - :cspan:`7` Byte 1
+
+      - :cspan:`7` Byte 2
+
+      - :cspan:`7` Byte 3
+
+    * -
+      -
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+    * .. _V4L2-PIX-FMT-YUV444:
+
+      - ``V4L2_PIX_FMT_YUV444``
+      - 'Y444'
+
+      - Cb\ :sub:`3`
+      - Cb\ :sub:`2`
+      - Cb\ :sub:`1`
+      - Cb\ :sub:`0`
+      - Cr\ :sub:`3`
+      - Cr\ :sub:`2`
+      - Cr\ :sub:`1`
+      - Cr\ :sub:`0`
+
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+      - Y'\ :sub:`3`
+      - Y'\ :sub:`2`
+      - Y'\ :sub:`1`
+      - Y'\ :sub:`0`
+
+      -  :cspan:`15`
+
+    * .. _V4L2-PIX-FMT-YUV555:
+
+      - ``V4L2_PIX_FMT_YUV555``
+      - 'YUVO'
+
+      - Cb\ :sub:`2`
+      - Cb\ :sub:`1`
+      - Cb\ :sub:`0`
+      - Cr\ :sub:`4`
+      - Cr\ :sub:`3`
+      - Cr\ :sub:`2`
+      - Cr\ :sub:`1`
+      - Cr\ :sub:`0`
+
+      - a
+      - Y'\ :sub:`4`
+      - Y'\ :sub:`3`
+      - Y'\ :sub:`2`
+      - Y'\ :sub:`1`
+      - Y'\ :sub:`0`
+      - Cb\ :sub:`4`
+      - Cb\ :sub:`3`
+
+      -  :cspan:`15`
+    * .. _V4L2-PIX-FMT-YUV565:
+
+      - ``V4L2_PIX_FMT_YUV565``
+      - 'YUVP'
+
+      - Cb\ :sub:`2`
+      - Cb\ :sub:`1`
+      - Cb\ :sub:`0`
+      - Cr\ :sub:`4`
+      - Cr\ :sub:`3`
+      - Cr\ :sub:`2`
+      - Cr\ :sub:`1`
+      - Cr\ :sub:`0`
+
+      - Y'\ :sub:`4`
+      - Y'\ :sub:`3`
+      - Y'\ :sub:`2`
+      - Y'\ :sub:`1`
+      - Y'\ :sub:`0`
+      - Cb\ :sub:`5`
+      - Cb\ :sub:`4`
+      - Cb\ :sub:`3`
+
+      -  :cspan:`15`
+
+    * .. _V4L2-PIX-FMT-YUV32:
+
+      - ``V4L2_PIX_FMT_YUV32``
+      - 'YUV4'
+
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+
+      - Y'\ :sub:`7`
+      - Y'\ :sub:`6`
+      - Y'\ :sub:`5`
+      - Y'\ :sub:`4`
+      - Y'\ :sub:`3`
+      - Y'\ :sub:`2`
+      - Y'\ :sub:`1`
+      - Y'\ :sub:`0`
+
+      - Cb\ :sub:`7`
+      - Cb\ :sub:`6`
+      - Cb\ :sub:`5`
+      - Cb\ :sub:`4`
+      - Cb\ :sub:`3`
+      - Cb\ :sub:`2`
+      - Cb\ :sub:`1`
+      - Cb\ :sub:`0`
+
+      - Cr\ :sub:`7`
+      - Cr\ :sub:`6`
+      - Cr\ :sub:`5`
+      - Cr\ :sub:`4`
+      - Cr\ :sub:`3`
+      - Cr\ :sub:`2`
+      - Cr\ :sub:`1`
+      - Cr\ :sub:`0`
+
+    * .. _V4L2-PIX-FMT-AYUV32:
+
+      - ``V4L2_PIX_FMT_AYUV32``
+      - 'AYUV'
+
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+
+      - Y'\ :sub:`7`
+      - Y'\ :sub:`6`
+      - Y'\ :sub:`5`
+      - Y'\ :sub:`4`
+      - Y'\ :sub:`3`
+      - Y'\ :sub:`2`
+      - Y'\ :sub:`1`
+      - Y'\ :sub:`0`
+
+      - Cb\ :sub:`7`
+      - Cb\ :sub:`6`
+      - Cb\ :sub:`5`
+      - Cb\ :sub:`4`
+      - Cb\ :sub:`3`
+      - Cb\ :sub:`2`
+      - Cb\ :sub:`1`
+      - Cb\ :sub:`0`
+
+      - Cr\ :sub:`7`
+      - Cr\ :sub:`6`
+      - Cr\ :sub:`5`
+      - Cr\ :sub:`4`
+      - Cr\ :sub:`3`
+      - Cr\ :sub:`2`
+      - Cr\ :sub:`1`
+      - Cr\ :sub:`0`
+
+    * .. _V4L2-PIX-FMT-XYUV32:
+
+      - ``V4L2_PIX_FMT_XYUV32``
+      - 'XYUV'
+
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+
+      - Y'\ :sub:`7`
+      - Y'\ :sub:`6`
+      - Y'\ :sub:`5`
+      - Y'\ :sub:`4`
+      - Y'\ :sub:`3`
+      - Y'\ :sub:`2`
+      - Y'\ :sub:`1`
+      - Y'\ :sub:`0`
+
+      - Cb\ :sub:`7`
+      - Cb\ :sub:`6`
+      - Cb\ :sub:`5`
+      - Cb\ :sub:`4`
+      - Cb\ :sub:`3`
+      - Cb\ :sub:`2`
+      - Cb\ :sub:`1`
+      - Cb\ :sub:`0`
+
+      - Cr\ :sub:`7`
+      - Cr\ :sub:`6`
+      - Cr\ :sub:`5`
+      - Cr\ :sub:`4`
+      - Cr\ :sub:`3`
+      - Cr\ :sub:`2`
+      - Cr\ :sub:`1`
+      - Cr\ :sub:`0`
+
+    * .. _V4L2-PIX-FMT-VUYA32:
+
+      - ``V4L2_PIX_FMT_VUYA32``
+      - 'VUYA'
+
+      - Cr\ :sub:`7`
+      - Cr\ :sub:`6`
+      - Cr\ :sub:`5`
+      - Cr\ :sub:`4`
+      - Cr\ :sub:`3`
+      - Cr\ :sub:`2`
+      - Cr\ :sub:`1`
+      - Cr\ :sub:`0`
+
+      - Cb\ :sub:`7`
+      - Cb\ :sub:`6`
+      - Cb\ :sub:`5`
+      - Cb\ :sub:`4`
+      - Cb\ :sub:`3`
+      - Cb\ :sub:`2`
+      - Cb\ :sub:`1`
+      - Cb\ :sub:`0`
+
+      - Y'\ :sub:`7`
+      - Y'\ :sub:`6`
+      - Y'\ :sub:`5`
+      - Y'\ :sub:`4`
+      - Y'\ :sub:`3`
+      - Y'\ :sub:`2`
+      - Y'\ :sub:`1`
+      - Y'\ :sub:`0`
+
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+
+    * .. _V4L2-PIX-FMT-VUYX32:
+
+      - ``V4L2_PIX_FMT_VUYX32``
+      - 'VUYX'
+
+      - Cr\ :sub:`7`
+      - Cr\ :sub:`6`
+      - Cr\ :sub:`5`
+      - Cr\ :sub:`4`
+      - Cr\ :sub:`3`
+      - Cr\ :sub:`2`
+      - Cr\ :sub:`1`
+      - Cr\ :sub:`0`
+
+      - Cb\ :sub:`7`
+      - Cb\ :sub:`6`
+      - Cb\ :sub:`5`
+      - Cb\ :sub:`4`
+      - Cb\ :sub:`3`
+      - Cb\ :sub:`2`
+      - Cb\ :sub:`1`
+      - Cb\ :sub:`0`
+
+      - Y'\ :sub:`7`
+      - Y'\ :sub:`6`
+      - Y'\ :sub:`5`
+      - Y'\ :sub:`4`
+      - Y'\ :sub:`3`
+      - Y'\ :sub:`2`
+      - Y'\ :sub:`1`
+      - Y'\ :sub:`0`
+
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+
+.. raw:: latex
+
+    \endgroup
+
+.. note::
+
+    #) Bit 7 is the most significant bit;
+
+    #) The value of a = alpha bits is undefined when reading from the driver,
+       ignored when writing to the driver, except when alpha blending has
+       been negotiated for a :ref:`Video Overlay <overlay>` or
+       :ref:`Video Output Overlay <osd>` for the formats Y444, YUV555 and
+       YUV4. However, for formats AYUV32 and VUYA32, the alpha component is
+       expected to contain a meaningful value that can be used by drivers
+       and applications. And, the formats XYUV32 and VUYX32 contain undefined
+       alpha values that must be ignored by all applications and drivers.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
new file mode 100644
index 000000000000..59b9e7238f90
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
@@ -0,0 +1,282 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _pixfmt-reserved:
+
+***************************
+Reserved Format Identifiers
+***************************
+
+These formats are not defined by this specification, they are just
+listed for reference and to avoid naming conflicts. If you want to
+register your own format, send an e-mail to the linux-media mailing list
+`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__
+for inclusion in the ``videodev2.h`` file. If you want to share your
+format with other developers add a link to your documentation and send a
+copy to the linux-media mailing list for inclusion in this section. If
+you think your format should be listed in a standard format section
+please make a proposal on the linux-media mailing list.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _reserved-formats:
+
+.. flat-table:: Reserved Image Formats
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - Identifier
+      - Code
+      - Details
+    * .. _V4L2-PIX-FMT-DV:
+
+      - ``V4L2_PIX_FMT_DV``
+      - 'dvsd'
+      - unknown
+    * .. _V4L2-PIX-FMT-ET61X251:
+
+      - ``V4L2_PIX_FMT_ET61X251``
+      - 'E625'
+      - Compressed format of the ET61X251 driver.
+    * .. _V4L2-PIX-FMT-HI240:
+
+      - ``V4L2_PIX_FMT_HI240``
+      - 'HI24'
+      - 8 bit RGB format used by the BTTV driver.
+    * .. _V4L2-PIX-FMT-HM12:
+
+      - ``V4L2_PIX_FMT_HM12``
+      - 'HM12'
+      - YUV 4:2:0 format used by the IVTV driver.
+
+	The format is documented in the kernel sources in the file
+	``Documentation/userspace-api/media/drivers/cx2341x-uapi.rst``
+    * .. _V4L2-PIX-FMT-CPIA1:
+
+      - ``V4L2_PIX_FMT_CPIA1``
+      - 'CPIA'
+      - YUV format used by the gspca cpia1 driver.
+    * .. _V4L2-PIX-FMT-JPGL:
+
+      - ``V4L2_PIX_FMT_JPGL``
+      - 'JPGL'
+      - JPEG-Light format (Pegasus Lossless JPEG) used in Divio webcams NW
+	80x.
+    * .. _V4L2-PIX-FMT-SPCA501:
+
+      - ``V4L2_PIX_FMT_SPCA501``
+      - 'S501'
+      - YUYV per line used by the gspca driver.
+    * .. _V4L2-PIX-FMT-SPCA505:
+
+      - ``V4L2_PIX_FMT_SPCA505``
+      - 'S505'
+      - YYUV per line used by the gspca driver.
+    * .. _V4L2-PIX-FMT-SPCA508:
+
+      - ``V4L2_PIX_FMT_SPCA508``
+      - 'S508'
+      - YUVY per line used by the gspca driver.
+    * .. _V4L2-PIX-FMT-SPCA561:
+
+      - ``V4L2_PIX_FMT_SPCA561``
+      - 'S561'
+      - Compressed GBRG Bayer format used by the gspca driver.
+    * .. _V4L2-PIX-FMT-PAC207:
+
+      - ``V4L2_PIX_FMT_PAC207``
+      - 'P207'
+      - Compressed BGGR Bayer format used by the gspca driver.
+    * .. _V4L2-PIX-FMT-MR97310A:
+
+      - ``V4L2_PIX_FMT_MR97310A``
+      - 'M310'
+      - Compressed BGGR Bayer format used by the gspca driver.
+    * .. _V4L2-PIX-FMT-JL2005BCD:
+
+      - ``V4L2_PIX_FMT_JL2005BCD``
+      - 'JL20'
+      - JPEG compressed RGGB Bayer format used by the gspca driver.
+    * .. _V4L2-PIX-FMT-OV511:
+
+      - ``V4L2_PIX_FMT_OV511``
+      - 'O511'
+      - OV511 JPEG format used by the gspca driver.
+    * .. _V4L2-PIX-FMT-OV518:
+
+      - ``V4L2_PIX_FMT_OV518``
+      - 'O518'
+      - OV518 JPEG format used by the gspca driver.
+    * .. _V4L2-PIX-FMT-PJPG:
+
+      - ``V4L2_PIX_FMT_PJPG``
+      - 'PJPG'
+      - Pixart 73xx JPEG format used by the gspca driver.
+    * .. _V4L2-PIX-FMT-SE401:
+
+      - ``V4L2_PIX_FMT_SE401``
+      - 'S401'
+      - Compressed RGB format used by the gspca se401 driver
+    * .. _V4L2-PIX-FMT-SQ905C:
+
+      - ``V4L2_PIX_FMT_SQ905C``
+      - '905C'
+      - Compressed RGGB bayer format used by the gspca driver.
+    * .. _V4L2-PIX-FMT-MJPEG:
+
+      - ``V4L2_PIX_FMT_MJPEG``
+      - 'MJPG'
+      - Compressed format used by the Zoran driver
+    * .. _V4L2-PIX-FMT-PWC1:
+
+      - ``V4L2_PIX_FMT_PWC1``
+      - 'PWC1'
+      - Compressed format of the PWC driver.
+    * .. _V4L2-PIX-FMT-PWC2:
+
+      - ``V4L2_PIX_FMT_PWC2``
+      - 'PWC2'
+      - Compressed format of the PWC driver.
+    * .. _V4L2-PIX-FMT-SN9C10X:
+
+      - ``V4L2_PIX_FMT_SN9C10X``
+      - 'S910'
+      - Compressed format of the SN9C102 driver.
+    * .. _V4L2-PIX-FMT-SN9C20X-I420:
+
+      - ``V4L2_PIX_FMT_SN9C20X_I420``
+      - 'S920'
+      - YUV 4:2:0 format of the gspca sn9c20x driver.
+    * .. _V4L2-PIX-FMT-SN9C2028:
+
+      - ``V4L2_PIX_FMT_SN9C2028``
+      - 'SONX'
+      - Compressed GBRG bayer format of the gspca sn9c2028 driver.
+    * .. _V4L2-PIX-FMT-STV0680:
+
+      - ``V4L2_PIX_FMT_STV0680``
+      - 'S680'
+      - Bayer format of the gspca stv0680 driver.
+    * .. _V4L2-PIX-FMT-WNVA:
+
+      - ``V4L2_PIX_FMT_WNVA``
+      - 'WNVA'
+      - Used by the Winnov Videum driver,
+	`http://www.thedirks.org/winnov/ <http://www.thedirks.org/winnov/>`__
+    * .. _V4L2-PIX-FMT-TM6000:
+
+      - ``V4L2_PIX_FMT_TM6000``
+      - 'TM60'
+      - Used by Trident tm6000
+    * .. _V4L2-PIX-FMT-CIT-YYVYUY:
+
+      - ``V4L2_PIX_FMT_CIT_YYVYUY``
+      - 'CITV'
+      - Used by xirlink CIT, found at IBM webcams.
+
+	Uses one line of Y then 1 line of VYUY
+    * .. _V4L2-PIX-FMT-KONICA420:
+
+      - ``V4L2_PIX_FMT_KONICA420``
+      - 'KONI'
+      - Used by Konica webcams.
+
+	YUV420 planar in blocks of 256 pixels.
+    * .. _V4L2-PIX-FMT-YYUV:
+
+      - ``V4L2_PIX_FMT_YYUV``
+      - 'YYUV'
+      - unknown
+    * .. _V4L2-PIX-FMT-Y4:
+
+      - ``V4L2_PIX_FMT_Y4``
+      - 'Y04 '
+      - Old 4-bit greyscale format. Only the most significant 4 bits of
+	each byte are used, the other bits are set to 0.
+    * .. _V4L2-PIX-FMT-Y6:
+
+      - ``V4L2_PIX_FMT_Y6``
+      - 'Y06 '
+      - Old 6-bit greyscale format. Only the most significant 6 bits of
+	each byte are used, the other bits are set to 0.
+    * .. _V4L2-PIX-FMT-S5C-UYVY-JPG:
+
+      - ``V4L2_PIX_FMT_S5C_UYVY_JPG``
+      - 'S5CI'
+      - Two-planar format used by Samsung S5C73MX cameras. The first plane
+	contains interleaved JPEG and UYVY image data, followed by meta
+	data in form of an array of offsets to the UYVY data blocks. The
+	actual pointer array follows immediately the interleaved JPEG/UYVY
+	data, the number of entries in this array equals the height of the
+	UYVY image. Each entry is a 4-byte unsigned integer in big endian
+	order and it's an offset to a single pixel line of the UYVY image.
+	The first plane can start either with JPEG or UYVY data chunk. The
+	size of a single UYVY block equals the UYVY image's width
+	multiplied by 2. The size of a JPEG chunk depends on the image and
+	can vary with each line.
+
+	The second plane, at an offset of 4084 bytes, contains a 4-byte
+	offset to the pointer array in the first plane. This offset is
+	followed by a 4-byte value indicating size of the pointer array.
+	All numbers in the second plane are also in big endian order.
+	Remaining data in the second plane is undefined. The information
+	in the second plane allows to easily find location of the pointer
+	array, which can be different for each frame. The size of the
+	pointer array is constant for given UYVY image height.
+
+	In order to extract UYVY and JPEG frames an application can
+	initially set a data pointer to the start of first plane and then
+	add an offset from the first entry of the pointers table. Such a
+	pointer indicates start of an UYVY image pixel line. Whole UYVY
+	line can be copied to a separate buffer. These steps should be
+	repeated for each line, i.e. the number of entries in the pointer
+	array. Anything what's in between the UYVY lines is JPEG data and
+	should be concatenated to form the JPEG stream.
+    * .. _V4L2-PIX-FMT-MT21C:
+
+      - ``V4L2_PIX_FMT_MT21C``
+      - 'MT21'
+      - Compressed two-planar YVU420 format used by Mediatek MT8173.
+	The compression is lossless.
+	It is an opaque intermediate format and the MDP hardware must be
+	used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``,
+	``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``.
+    * .. _V4L2-PIX-FMT-SUNXI-TILED-NV12:
+
+      - ``V4L2_PIX_FMT_SUNXI_TILED_NV12``
+      - 'ST12'
+      - Two-planar NV12-based format used by the video engine found on Allwinner
+	(codenamed sunxi) platforms, with 32x32 tiles for the luminance plane
+	and 32x64 tiles for the chrominance plane. The data in each tile is
+	stored in linear order, within the tile bounds. Each tile follows the
+	previous one linearly in memory (from left to right, top to bottom).
+
+	The associated buffer dimensions are aligned to match an integer number
+	of tiles, resulting in 32-aligned resolutions for the luminance plane
+	and 16-aligned resolutions for the chrominance plane (with 2x2
+	subsampling).
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _format-flags:
+
+.. flat-table:: Format Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_PIX_FMT_FLAG_PREMUL_ALPHA``
+      - 0x00000001
+      - The color values are premultiplied by the alpha channel value. For
+	example, if a light blue pixel with 50% transparency was described
+	by RGBA values (128, 192, 255, 128), the same pixel described with
+	premultiplied colors would be described by RGBA values (64, 96,
+	128, 128)
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
new file mode 100644
index 000000000000..89cc2a37b285
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
@@ -0,0 +1,1304 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _pixfmt-rgb:
+
+***********
+RGB Formats
+***********
+
+Description
+===========
+
+These formats are designed to match the pixel formats of typical PC
+graphics frame buffers. They occupy 8, 16, 24 or 32 bits per pixel.
+These are all packed-pixel formats, meaning all the data for a pixel lie
+next to each other in memory.
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{2.8cm}|p{2.0cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+
+.. flat-table:: RGB Image Formats
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      - :cspan:`7` Byte 0 in memory
+      - :cspan:`7` Byte 1
+      - :cspan:`7` Byte 2
+      - :cspan:`7` Byte 3
+    * -
+      -
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _V4L2-PIX-FMT-RGB332:
+
+      - ``V4L2_PIX_FMT_RGB332``
+      - 'RGB1'
+
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-ARGB444:
+
+      - ``V4L2_PIX_FMT_ARGB444``
+      - 'AR12'
+
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-XRGB444:
+
+      - ``V4L2_PIX_FMT_XRGB444``
+      - 'XR12'
+
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-RGBA444:
+
+      - ``V4L2_PIX_FMT_RGBA444``
+      - 'RA12'
+
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-RGBX444:
+
+      - ``V4L2_PIX_FMT_RGBX444``
+      - 'RX12'
+
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-ABGR444:
+
+      - ``V4L2_PIX_FMT_ABGR444``
+      - 'AB12'
+
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-XBGR444:
+
+      - ``V4L2_PIX_FMT_XBGR444``
+      - 'XB12'
+
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-BGRA444:
+
+      - ``V4L2_PIX_FMT_BGRA444``
+      - 'BA12'
+
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-BGRX444:
+
+      - ``V4L2_PIX_FMT_BGRX444``
+      - 'BX12'
+
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-ARGB555:
+
+      - ``V4L2_PIX_FMT_ARGB555``
+      - 'AR15'
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - a
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      -
+    * .. _V4L2-PIX-FMT-XRGB555:
+
+      - ``V4L2_PIX_FMT_XRGB555``
+      - 'XR15'
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - `-`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      -
+    * .. _V4L2-PIX-FMT-RGBA555:
+
+      - ``V4L2_PIX_FMT_RGBA555``
+      - 'RA15'
+
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - a
+
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      -
+    * .. _V4L2-PIX-FMT-RGBX555:
+
+      - ``V4L2_PIX_FMT_RGBX555``
+      - 'RX15'
+
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - `-`
+
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      -
+    * .. _V4L2-PIX-FMT-ABGR555:
+
+      - ``V4L2_PIX_FMT_ABGR555``
+      - 'AB15'
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - a
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      -
+    * .. _V4L2-PIX-FMT-XBGR555:
+
+      - ``V4L2_PIX_FMT_XBGR555``
+      - 'XB15'
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - `-`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      -
+    * .. _V4L2-PIX-FMT-BGRA555:
+
+      - ``V4L2_PIX_FMT_BGRA555``
+      - 'BA15'
+
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - a
+
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      -
+    * .. _V4L2-PIX-FMT-BGRX555:
+
+      - ``V4L2_PIX_FMT_BGRX555``
+      - 'BX15'
+
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - `-`
+
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      -
+    * .. _V4L2-PIX-FMT-RGB565:
+
+      - ``V4L2_PIX_FMT_RGB565``
+      - 'RGBP'
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      -
+    * .. _V4L2-PIX-FMT-ARGB555X:
+
+      - ``V4L2_PIX_FMT_ARGB555X``
+      - 'AR15' | (1 << 31)
+
+      - a
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-XRGB555X:
+
+      - ``V4L2_PIX_FMT_XRGB555X``
+      - 'XR15' | (1 << 31)
+
+      - `-`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-RGB565X:
+
+      - ``V4L2_PIX_FMT_RGB565X``
+      - 'RGBR'
+
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-BGR24:
+
+      - ``V4L2_PIX_FMT_BGR24``
+      - 'BGR3'
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-RGB24:
+
+      - ``V4L2_PIX_FMT_RGB24``
+      - 'RGB3'
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-BGR666:
+
+      - ``V4L2_PIX_FMT_BGR666``
+      - 'BGRH'
+
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+    * .. _V4L2-PIX-FMT-ABGR32:
+
+      - ``V4L2_PIX_FMT_ABGR32``
+      - 'AR24'
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+    * .. _V4L2-PIX-FMT-XBGR32:
+
+      - ``V4L2_PIX_FMT_XBGR32``
+      - 'XR24'
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+    * .. _V4L2-PIX-FMT-BGRA32:
+
+      - ``V4L2_PIX_FMT_BGRA32``
+      - 'RA24'
+
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _V4L2-PIX-FMT-BGRX32:
+
+      - ``V4L2_PIX_FMT_BGRX32``
+      - 'RX24'
+
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _V4L2-PIX-FMT-RGBA32:
+
+      - ``V4L2_PIX_FMT_RGBA32``
+      - 'AB24'
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+    * .. _V4L2-PIX-FMT-RGBX32:
+
+      - ``V4L2_PIX_FMT_RGBX32``
+      - 'XB24'
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+    * .. _V4L2-PIX-FMT-ARGB32:
+
+      - ``V4L2_PIX_FMT_ARGB32``
+      - 'BA24'
+
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _V4L2-PIX-FMT-XRGB32:
+
+      - ``V4L2_PIX_FMT_XRGB32``
+      - 'BX24'
+
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+      - `-`
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+.. raw:: latex
+
+    \endgroup
+
+.. note:: Bit 7 is the most significant bit.
+
+The usage and value of the alpha bits (a) in the ARGB and ABGR formats
+(collectively referred to as alpha formats) depend on the device type
+and hardware operation. :ref:`Capture <capture>` devices (including
+capture queues of mem-to-mem devices) fill the alpha component in
+memory. When the device outputs an alpha channel the alpha component
+will have a meaningful value. Otherwise, when the device doesn't output
+an alpha channel but can set the alpha bit to a user-configurable value,
+the :ref:`V4L2_CID_ALPHA_COMPONENT <v4l2-alpha-component>` control
+is used to specify that alpha value, and the alpha component of all
+pixels will be set to the value specified by that control. Otherwise a
+corresponding format without an alpha component (XRGB or XBGR) must be
+used instead of an alpha format.
+
+:ref:`Output <output>` devices (including output queues of mem-to-mem
+devices and :ref:`video output overlay <osd>` devices) read the alpha
+component from memory. When the device processes the alpha channel the
+alpha component must be filled with meaningful values by applications.
+Otherwise a corresponding format without an alpha component (XRGB or
+XBGR) must be used instead of an alpha format.
+
+The XRGB and XBGR formats contain undefined bits (-). Applications,
+devices and drivers must ignore those bits, for both
+:ref:`capture` and :ref:`output` devices.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{3.1cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|
+
+.. flat-table:: RGB byte order
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       11 3 3 3 3 3 3 3 3 3 3 3 3
+
+    * - start + 0:
+      - B\ :sub:`00`
+      - G\ :sub:`00`
+      - R\ :sub:`00`
+      - B\ :sub:`01`
+      - G\ :sub:`01`
+      - R\ :sub:`01`
+      - B\ :sub:`02`
+      - G\ :sub:`02`
+      - R\ :sub:`02`
+      - B\ :sub:`03`
+      - G\ :sub:`03`
+      - R\ :sub:`03`
+    * - start + 12:
+      - B\ :sub:`10`
+      - G\ :sub:`10`
+      - R\ :sub:`10`
+      - B\ :sub:`11`
+      - G\ :sub:`11`
+      - R\ :sub:`11`
+      - B\ :sub:`12`
+      - G\ :sub:`12`
+      - R\ :sub:`12`
+      - B\ :sub:`13`
+      - G\ :sub:`13`
+      - R\ :sub:`13`
+    * - start + 24:
+      - B\ :sub:`20`
+      - G\ :sub:`20`
+      - R\ :sub:`20`
+      - B\ :sub:`21`
+      - G\ :sub:`21`
+      - R\ :sub:`21`
+      - B\ :sub:`22`
+      - G\ :sub:`22`
+      - R\ :sub:`22`
+      - B\ :sub:`23`
+      - G\ :sub:`23`
+      - R\ :sub:`23`
+    * - start + 36:
+      - B\ :sub:`30`
+      - G\ :sub:`30`
+      - R\ :sub:`30`
+      - B\ :sub:`31`
+      - G\ :sub:`31`
+      - R\ :sub:`31`
+      - B\ :sub:`32`
+      - G\ :sub:`32`
+      - R\ :sub:`32`
+      - B\ :sub:`33`
+      - G\ :sub:`33`
+      - R\ :sub:`33`
+
+.. raw:: latex
+
+    \normalsize
+
+Formats defined in :ref:`pixfmt-rgb-deprecated` are deprecated and
+must not be used by new drivers. They are documented here for reference.
+The meaning of their alpha bits ``(a)`` are ill-defined and interpreted as in
+either the corresponding ARGB or XRGB format, depending on the driver.
+
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{2.6cm}|p{0.70cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _pixfmt-rgb-deprecated:
+
+.. flat-table:: Deprecated Packed RGB Image Formats
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      - :cspan:`7` Byte 0 in memory
+
+      - :cspan:`7` Byte 1
+
+      - :cspan:`7` Byte 2
+
+      - :cspan:`7` Byte 3
+    * -
+      -
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _V4L2-PIX-FMT-RGB444:
+
+      - ``V4L2_PIX_FMT_RGB444``
+      - 'R444'
+
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-RGB555:
+
+      - ``V4L2_PIX_FMT_RGB555``
+      - 'RGBO'
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - a
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      -
+    * .. _V4L2-PIX-FMT-RGB555X:
+
+      - ``V4L2_PIX_FMT_RGB555X``
+      - 'RGBQ'
+
+      - a
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      -
+    * .. _V4L2-PIX-FMT-BGR32:
+
+      - ``V4L2_PIX_FMT_BGR32``
+      - 'BGR4'
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+    * .. _V4L2-PIX-FMT-RGB32:
+
+      - ``V4L2_PIX_FMT_RGB32``
+      - 'RGB4'
+
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+.. raw:: latex
+
+    \endgroup
+
+A test utility to determine which RGB formats a driver actually supports
+is available from the LinuxTV v4l-dvb repository. See
+`https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
+instructions.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst
new file mode 100644
index 000000000000..13f3908d162a
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst
@@ -0,0 +1,37 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-sdr-fmt-cs8:
+
+*************************
+V4L2_SDR_FMT_CS8 ('CS08')
+*************************
+
+Complex signed 8-bit IQ sample
+
+
+Description
+===========
+
+This format contains sequence of complex number samples. Each complex
+number consist two parts, called In-phase and Quadrature (IQ). Both I
+and Q are represented as a 8 bit signed number. I value comes first and
+Q value after that.
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - I'\ :sub:`0`
+    * - start + 1:
+      - Q'\ :sub:`0`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst
new file mode 100644
index 000000000000..41e5b990d499
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst
@@ -0,0 +1,41 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-SDR-FMT-CS14LE:
+
+****************************
+V4L2_SDR_FMT_CS14LE ('CS14')
+****************************
+
+Complex signed 14-bit little endian IQ sample
+
+
+Description
+===========
+
+This format contains sequence of complex number samples. Each complex
+number consist two parts, called In-phase and Quadrature (IQ). Both I
+and Q are represented as a 14 bit signed little endian number. I value
+comes first and Q value after that. 14 bit value is stored in 16 bit
+space with unused high bits padded with 0.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - I'\ :sub:`0[7:0]`
+      - I'\ :sub:`0[13:8]`
+    * - start + 2:
+      - Q'\ :sub:`0[7:0]`
+      - Q'\ :sub:`0[13:8]`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst
new file mode 100644
index 000000000000..1085b5ad8eb7
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst
@@ -0,0 +1,37 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-sdr-fmt-cu8:
+
+*************************
+V4L2_SDR_FMT_CU8 ('CU08')
+*************************
+
+Complex unsigned 8-bit IQ sample
+
+
+Description
+===========
+
+This format contains sequence of complex number samples. Each complex
+number consist two parts, called In-phase and Quadrature (IQ). Both I
+and Q are represented as a 8 bit unsigned number. I value comes first
+and Q value after that.
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - I'\ :sub:`0`
+    * - start + 1:
+      - Q'\ :sub:`0`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst
new file mode 100644
index 000000000000..9772b30bda95
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst
@@ -0,0 +1,41 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-SDR-FMT-CU16LE:
+
+****************************
+V4L2_SDR_FMT_CU16LE ('CU16')
+****************************
+
+
+Complex unsigned 16-bit little endian IQ sample
+
+
+Description
+===========
+
+This format contains sequence of complex number samples. Each complex
+number consist two parts, called In-phase and Quadrature (IQ). Both I
+and Q are represented as a 16 bit unsigned little endian number. I value
+comes first and Q value after that.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - I'\ :sub:`0[7:0]`
+      - I'\ :sub:`0[15:8]`
+    * - start + 2:
+      - Q'\ :sub:`0[7:0]`
+      - Q'\ :sub:`0[15:8]`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst
new file mode 100644
index 000000000000..53a0a862f33a
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst
@@ -0,0 +1,62 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-SDR-FMT-PCU16BE:
+
+******************************
+V4L2_SDR_FMT_PCU16BE ('PC16')
+******************************
+
+Planar complex unsigned 16-bit big endian IQ sample
+
+Description
+===========
+
+This format contains a sequence of complex number samples. Each complex
+number consist of two parts called In-phase and Quadrature (IQ). Both I
+and Q are represented as a 16 bit unsigned big endian number stored in
+32 bit space. The remaining unused bits within the 32 bit space will be
+padded with 0. I value starts first and Q value starts at an offset
+equalling half of the buffer size (i.e.) offset = buffersize/2. Out of
+the 16 bits, bit 15:2 (14 bit) is data and bit 1:0 (2 bit) can be any
+value.
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * -  Offset:
+      -  Byte B0
+      -  Byte B1
+      -  Byte B2
+      -  Byte B3
+    * -  start + 0:
+      -  I'\ :sub:`0[13:6]`
+      -  I'\ :sub:`0[5:0]; B1[1:0]=pad`
+      -  pad
+      -  pad
+    * -  start + 4:
+      -  I'\ :sub:`1[13:6]`
+      -  I'\ :sub:`1[5:0]; B1[1:0]=pad`
+      -  pad
+      -  pad
+    * -  ...
+    * - start + offset:
+      -  Q'\ :sub:`0[13:6]`
+      -  Q'\ :sub:`0[5:0]; B1[1:0]=pad`
+      -  pad
+      -  pad
+    * - start + offset + 4:
+      -  Q'\ :sub:`1[13:6]`
+      -  Q'\ :sub:`1[5:0]; B1[1:0]=pad`
+      -  pad
+      -  pad
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst
new file mode 100644
index 000000000000..7f2d2545fb04
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst
@@ -0,0 +1,62 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-SDR-FMT-PCU18BE:
+
+******************************
+V4L2_SDR_FMT_PCU18BE ('PC18')
+******************************
+
+Planar complex unsigned 18-bit big endian IQ sample
+
+Description
+===========
+
+This format contains a sequence of complex number samples. Each complex
+number consist of two parts called In-phase and Quadrature (IQ). Both I
+and Q are represented as a 18 bit unsigned big endian number stored in
+32 bit space. The remaining unused bits within the 32 bit space will be
+padded with 0. I value starts first and Q value starts at an offset
+equalling half of the buffer size (i.e.) offset = buffersize/2. Out of
+the 18 bits, bit 17:2 (16 bit) is data and bit 1:0 (2 bit) can be any
+value.
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * -  Offset:
+      -  Byte B0
+      -  Byte B1
+      -  Byte B2
+      -  Byte B3
+    * -  start + 0:
+      -  I'\ :sub:`0[17:10]`
+      -  I'\ :sub:`0[9:2]`
+      -  I'\ :sub:`0[1:0]; B2[5:0]=pad`
+      -  pad
+    * -  start + 4:
+      -  I'\ :sub:`1[17:10]`
+      -  I'\ :sub:`1[9:2]`
+      -  I'\ :sub:`1[1:0]; B2[5:0]=pad`
+      -  pad
+    * -  ...
+    * - start + offset:
+      -  Q'\ :sub:`0[17:10]`
+      -  Q'\ :sub:`0[9:2]`
+      -  Q'\ :sub:`0[1:0]; B2[5:0]=pad`
+      -  pad
+    * - start + offset + 4:
+      -  Q'\ :sub:`1[17:10]`
+      -  Q'\ :sub:`1[9:2]`
+      -  Q'\ :sub:`1[1:0]; B2[5:0]=pad`
+      -  pad
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst
new file mode 100644
index 000000000000..9f3d67b4e94c
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst
@@ -0,0 +1,62 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-SDR-FMT-PCU20BE:
+
+******************************
+V4L2_SDR_FMT_PCU20BE ('PC20')
+******************************
+
+Planar complex unsigned 20-bit big endian IQ sample
+
+Description
+===========
+
+This format contains a sequence of complex number samples. Each complex
+number consist of two parts called In-phase and Quadrature (IQ). Both I
+and Q are represented as a 20 bit unsigned big endian number stored in
+32 bit space. The remaining unused bits within the 32 bit space will be
+padded with 0. I value starts first and Q value starts at an offset
+equalling half of the buffer size (i.e.) offset = buffersize/2. Out of
+the 20 bits, bit 19:2 (18 bit) is data and bit 1:0 (2 bit) can be any
+value.
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * -  Offset:
+      -  Byte B0
+      -  Byte B1
+      -  Byte B2
+      -  Byte B3
+    * -  start + 0:
+      -  I'\ :sub:`0[19:12]`
+      -  I'\ :sub:`0[11:4]`
+      -  I'\ :sub:`0[3:0]; B2[3:0]=pad`
+      -  pad
+    * -  start + 4:
+      -  I'\ :sub:`1[19:12]`
+      -  I'\ :sub:`1[11:4]`
+      -  I'\ :sub:`1[3:0]; B2[3:0]=pad`
+      -  pad
+    * -  ...
+    * - start + offset:
+      -  Q'\ :sub:`0[19:12]`
+      -  Q'\ :sub:`0[11:4]`
+      -  Q'\ :sub:`0[3:0]; B2[3:0]=pad`
+      -  pad
+    * - start + offset + 4:
+      -  Q'\ :sub:`1[19:12]`
+      -  Q'\ :sub:`1[11:4]`
+      -  Q'\ :sub:`1[3:0]; B2[3:0]=pad`
+      -  pad
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst
new file mode 100644
index 000000000000..c9cde8d425f7
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst
@@ -0,0 +1,39 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-SDR-FMT-RU12LE:
+
+****************************
+V4L2_SDR_FMT_RU12LE ('RU12')
+****************************
+
+
+Real unsigned 12-bit little endian sample
+
+
+Description
+===========
+
+This format contains sequence of real number samples. Each sample is
+represented as a 12 bit unsigned little endian number. Sample is stored
+in 16 bit space with unused high bits padded with 0.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - I'\ :sub:`0[7:0]`
+      - I'\ :sub:`0[11:8]`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst
new file mode 100644
index 000000000000..5afa02a66698
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst
@@ -0,0 +1,342 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-pix-fmt-ipu3-sbggr10:
+.. _v4l2-pix-fmt-ipu3-sgbrg10:
+.. _v4l2-pix-fmt-ipu3-sgrbg10:
+.. _v4l2-pix-fmt-ipu3-srggb10:
+
+**********************************************************************************************************************************************
+V4L2_PIX_FMT_IPU3_SBGGR10 ('ip3b'), V4L2_PIX_FMT_IPU3_SGBRG10 ('ip3g'), V4L2_PIX_FMT_IPU3_SGRBG10 ('ip3G'), V4L2_PIX_FMT_IPU3_SRGGB10 ('ip3r')
+**********************************************************************************************************************************************
+
+10-bit Bayer formats
+
+Description
+===========
+
+These four pixel formats are used by Intel IPU3 driver, they are raw
+sRGB / Bayer formats with 10 bits per sample with every 25 pixels packed
+to 32 bytes leaving 6 most significant bits padding in the last byte.
+The format is little endian.
+
+In other respects this format is similar to :ref:`V4L2-PIX-FMT-SRGGB10`.
+Below is an example of a small image in V4L2_PIX_FMT_IPU3_SBGGR10 format.
+
+**Byte Order.**
+Each cell is one byte.
+
+.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|
+
+.. flat-table::
+
+    * - start + 0:
+      - B\ :sub:`0000low`
+      - G\ :sub:`0001low`\ (bits 7--2)
+
+        B\ :sub:`0000high`\ (bits 1--0)
+      - B\ :sub:`0002low`\ (bits 7--4)
+
+        G\ :sub:`0001high`\ (bits 3--0)
+      - G\ :sub:`0003low`\ (bits 7--6)
+
+        B\ :sub:`0002high`\ (bits 5--0)
+    * - start + 4:
+      - G\ :sub:`0003high`
+      - B\ :sub:`0004low`
+      - G\ :sub:`0005low`\ (bits 7--2)
+
+        B\ :sub:`0004high`\ (bits 1--0)
+      - B\ :sub:`0006low`\ (bits 7--4)
+
+        G\ :sub:`0005high`\ (bits 3--0)
+    * - start + 8:
+      - G\ :sub:`0007low`\ (bits 7--6)
+
+        B\ :sub:`0006high`\ (bits 5--0)
+      - G\ :sub:`0007high`
+      - B\ :sub:`0008low`
+      - G\ :sub:`0009low`\ (bits 7--2)
+
+        B\ :sub:`0008high`\ (bits 1--0)
+    * - start + 12:
+      - B\ :sub:`0010low`\ (bits 7--4)
+
+        G\ :sub:`0009high`\ (bits 3--0)
+      - G\ :sub:`0011low`\ (bits 7--6)
+
+        B\ :sub:`0010high`\ (bits 5--0)
+      - G\ :sub:`0011high`
+      - B\ :sub:`0012low`
+    * - start + 16:
+      - G\ :sub:`0013low`\ (bits 7--2)
+
+        B\ :sub:`0012high`\ (bits 1--0)
+      - B\ :sub:`0014low`\ (bits 7--4)
+
+        G\ :sub:`0013high`\ (bits 3--0)
+      - G\ :sub:`0015low`\ (bits 7--6)
+
+        B\ :sub:`0014high`\ (bits 5--0)
+      - G\ :sub:`0015high`
+    * - start + 20
+      - B\ :sub:`0016low`
+      - G\ :sub:`0017low`\ (bits 7--2)
+
+        B\ :sub:`0016high`\ (bits 1--0)
+      - B\ :sub:`0018low`\ (bits 7--4)
+
+        G\ :sub:`0017high`\ (bits 3--0)
+      - G\ :sub:`0019low`\ (bits 7--6)
+
+        B\ :sub:`0018high`\ (bits 5--0)
+    * - start + 24:
+      - G\ :sub:`0019high`
+      - B\ :sub:`0020low`
+      - G\ :sub:`0021low`\ (bits 7--2)
+
+        B\ :sub:`0020high`\ (bits 1--0)
+      - B\ :sub:`0022low`\ (bits 7--4)
+
+        G\ :sub:`0021high`\ (bits 3--0)
+    * - start + 28:
+      - G\ :sub:`0023low`\ (bits 7--6)
+
+        B\ :sub:`0022high`\ (bits 5--0)
+      - G\ :sub:`0023high`
+      - B\ :sub:`0024low`
+      - B\ :sub:`0024high`\ (bits 1--0)
+    * - start + 32:
+      - G\ :sub:`0100low`
+      - R\ :sub:`0101low`\ (bits 7--2)
+
+        G\ :sub:`0100high`\ (bits 1--0)
+      - G\ :sub:`0102low`\ (bits 7--4)
+
+        R\ :sub:`0101high`\ (bits 3--0)
+      - R\ :sub:`0103low`\ (bits 7--6)
+
+        G\ :sub:`0102high`\ (bits 5--0)
+    * - start + 36:
+      - R\ :sub:`0103high`
+      - G\ :sub:`0104low`
+      - R\ :sub:`0105low`\ (bits 7--2)
+
+        G\ :sub:`0104high`\ (bits 1--0)
+      - G\ :sub:`0106low`\ (bits 7--4)
+
+        R\ :sub:`0105high`\ (bits 3--0)
+    * - start + 40:
+      - R\ :sub:`0107low`\ (bits 7--6)
+
+        G\ :sub:`0106high`\ (bits 5--0)
+      - R\ :sub:`0107high`
+      - G\ :sub:`0108low`
+      - R\ :sub:`0109low`\ (bits 7--2)
+
+        G\ :sub:`0108high`\ (bits 1--0)
+    * - start + 44:
+      - G\ :sub:`0110low`\ (bits 7--4)
+
+        R\ :sub:`0109high`\ (bits 3--0)
+      - R\ :sub:`0111low`\ (bits 7--6)
+
+        G\ :sub:`0110high`\ (bits 5--0)
+      - R\ :sub:`0111high`
+      - G\ :sub:`0112low`
+    * - start + 48:
+      - R\ :sub:`0113low`\ (bits 7--2)
+
+        G\ :sub:`0112high`\ (bits 1--0)
+      - G\ :sub:`0114low`\ (bits 7--4)
+
+        R\ :sub:`0113high`\ (bits 3--0)
+      - R\ :sub:`0115low`\ (bits 7--6)
+
+        G\ :sub:`0114high`\ (bits 5--0)
+      - R\ :sub:`0115high`
+    * - start + 52:
+      - G\ :sub:`0116low`
+      - R\ :sub:`0117low`\ (bits 7--2)
+
+        G\ :sub:`0116high`\ (bits 1--0)
+      - G\ :sub:`0118low`\ (bits 7--4)
+
+        R\ :sub:`0117high`\ (bits 3--0)
+      - R\ :sub:`0119low`\ (bits 7--6)
+
+        G\ :sub:`0118high`\ (bits 5--0)
+    * - start + 56:
+      - R\ :sub:`0119high`
+      - G\ :sub:`0120low`
+      - R\ :sub:`0121low`\ (bits 7--2)
+
+        G\ :sub:`0120high`\ (bits 1--0)
+      - G\ :sub:`0122low`\ (bits 7--4)
+
+        R\ :sub:`0121high`\ (bits 3--0)
+    * - start + 60:
+      - R\ :sub:`0123low`\ (bits 7--6)
+
+        G\ :sub:`0122high`\ (bits 5--0)
+      - R\ :sub:`0123high`
+      - G\ :sub:`0124low`
+      - G\ :sub:`0124high`\ (bits 1--0)
+    * - start + 64:
+      - B\ :sub:`0200low`
+      - G\ :sub:`0201low`\ (bits 7--2)
+
+        B\ :sub:`0200high`\ (bits 1--0)
+      - B\ :sub:`0202low`\ (bits 7--4)
+
+        G\ :sub:`0201high`\ (bits 3--0)
+      - G\ :sub:`0203low`\ (bits 7--6)
+
+        B\ :sub:`0202high`\ (bits 5--0)
+    * - start + 68:
+      - G\ :sub:`0203high`
+      - B\ :sub:`0204low`
+      - G\ :sub:`0205low`\ (bits 7--2)
+
+        B\ :sub:`0204high`\ (bits 1--0)
+      - B\ :sub:`0206low`\ (bits 7--4)
+
+        G\ :sub:`0205high`\ (bits 3--0)
+    * - start + 72:
+      - G\ :sub:`0207low`\ (bits 7--6)
+
+        B\ :sub:`0206high`\ (bits 5--0)
+      - G\ :sub:`0207high`
+      - B\ :sub:`0208low`
+      - G\ :sub:`0209low`\ (bits 7--2)
+
+        B\ :sub:`0208high`\ (bits 1--0)
+    * - start + 76:
+      - B\ :sub:`0210low`\ (bits 7--4)
+
+        G\ :sub:`0209high`\ (bits 3--0)
+      - G\ :sub:`0211low`\ (bits 7--6)
+
+        B\ :sub:`0210high`\ (bits 5--0)
+      - G\ :sub:`0211high`
+      - B\ :sub:`0212low`
+    * - start + 80:
+      - G\ :sub:`0213low`\ (bits 7--2)
+
+        B\ :sub:`0212high`\ (bits 1--0)
+      - B\ :sub:`0214low`\ (bits 7--4)
+
+        G\ :sub:`0213high`\ (bits 3--0)
+      - G\ :sub:`0215low`\ (bits 7--6)
+
+        B\ :sub:`0214high`\ (bits 5--0)
+      - G\ :sub:`0215high`
+    * - start + 84:
+      - B\ :sub:`0216low`
+      - G\ :sub:`0217low`\ (bits 7--2)
+
+        B\ :sub:`0216high`\ (bits 1--0)
+      - B\ :sub:`0218low`\ (bits 7--4)
+
+        G\ :sub:`0217high`\ (bits 3--0)
+      - G\ :sub:`0219low`\ (bits 7--6)
+
+        B\ :sub:`0218high`\ (bits 5--0)
+    * - start + 88:
+      - G\ :sub:`0219high`
+      - B\ :sub:`0220low`
+      - G\ :sub:`0221low`\ (bits 7--2)
+
+        B\ :sub:`0220high`\ (bits 1--0)
+      - B\ :sub:`0222low`\ (bits 7--4)
+
+        G\ :sub:`0221high`\ (bits 3--0)
+    * - start + 92:
+      - G\ :sub:`0223low`\ (bits 7--6)
+
+        B\ :sub:`0222high`\ (bits 5--0)
+      - G\ :sub:`0223high`
+      - B\ :sub:`0224low`
+      - B\ :sub:`0224high`\ (bits 1--0)
+    * - start + 96:
+      - G\ :sub:`0300low`
+      - R\ :sub:`0301low`\ (bits 7--2)
+
+        G\ :sub:`0300high`\ (bits 1--0)
+      - G\ :sub:`0302low`\ (bits 7--4)
+
+        R\ :sub:`0301high`\ (bits 3--0)
+      - R\ :sub:`0303low`\ (bits 7--6)
+
+        G\ :sub:`0302high`\ (bits 5--0)
+    * - start + 100:
+      - R\ :sub:`0303high`
+      - G\ :sub:`0304low`
+      - R\ :sub:`0305low`\ (bits 7--2)
+
+        G\ :sub:`0304high`\ (bits 1--0)
+      - G\ :sub:`0306low`\ (bits 7--4)
+
+        R\ :sub:`0305high`\ (bits 3--0)
+    * - start + 104:
+      - R\ :sub:`0307low`\ (bits 7--6)
+
+        G\ :sub:`0306high`\ (bits 5--0)
+      - R\ :sub:`0307high`
+      - G\ :sub:`0308low`
+      - R\ :sub:`0309low`\ (bits 7--2)
+
+        G\ :sub:`0308high`\ (bits 1--0)
+    * - start + 108:
+      - G\ :sub:`0310low`\ (bits 7--4)
+
+        R\ :sub:`0309high`\ (bits 3--0)
+      - R\ :sub:`0311low`\ (bits 7--6)
+
+        G\ :sub:`0310high`\ (bits 5--0)
+      - R\ :sub:`0311high`
+      - G\ :sub:`0312low`
+    * - start + 112:
+      - R\ :sub:`0313low`\ (bits 7--2)
+
+        G\ :sub:`0312high`\ (bits 1--0)
+      - G\ :sub:`0314low`\ (bits 7--4)
+
+        R\ :sub:`0313high`\ (bits 3--0)
+      - R\ :sub:`0315low`\ (bits 7--6)
+
+        G\ :sub:`0314high`\ (bits 5--0)
+      - R\ :sub:`0315high`
+    * - start + 116:
+      - G\ :sub:`0316low`
+      - R\ :sub:`0317low`\ (bits 7--2)
+
+        G\ :sub:`0316high`\ (bits 1--0)
+      - G\ :sub:`0318low`\ (bits 7--4)
+
+        R\ :sub:`0317high`\ (bits 3--0)
+      - R\ :sub:`0319low`\ (bits 7--6)
+
+        G\ :sub:`0318high`\ (bits 5--0)
+    * - start + 120:
+      - R\ :sub:`0319high`
+      - G\ :sub:`0320low`
+      - R\ :sub:`0321low`\ (bits 7--2)
+
+        G\ :sub:`0320high`\ (bits 1--0)
+      - G\ :sub:`0322low`\ (bits 7--4)
+
+        R\ :sub:`0321high`\ (bits 3--0)
+    * - start + 124:
+      - R\ :sub:`0323low`\ (bits 7--6)
+
+        G\ :sub:`0322high`\ (bits 5--0)
+      - R\ :sub:`0323high`
+      - G\ :sub:`0324low`
+      - G\ :sub:`0324high`\ (bits 1--0)
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst
new file mode 100644
index 000000000000..37cc1bb8241f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst
@@ -0,0 +1,83 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SRGGB10:
+.. _v4l2-pix-fmt-sbggr10:
+.. _v4l2-pix-fmt-sgbrg10:
+.. _v4l2-pix-fmt-sgrbg10:
+
+***************************************************************************************************************************
+V4L2_PIX_FMT_SRGGB10 ('RG10'), V4L2_PIX_FMT_SGRBG10 ('BA10'), V4L2_PIX_FMT_SGBRG10 ('GB10'), V4L2_PIX_FMT_SBGGR10 ('BG10'),
+***************************************************************************************************************************
+
+
+V4L2_PIX_FMT_SGRBG10
+V4L2_PIX_FMT_SGBRG10
+V4L2_PIX_FMT_SBGGR10
+10-bit Bayer formats expanded to 16 bits
+
+
+Description
+===========
+
+These four pixel formats are raw sRGB / Bayer formats with 10 bits per
+sample. Each sample is stored in a 16-bit word, with 6 unused
+high bits filled with zeros. Each n-pixel row contains n/2 green samples and
+n/2 blue or red samples, with alternating red and blue rows. Bytes are
+stored in memory in little endian order. They are conventionally described
+as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example of one of
+these formats:
+
+**Byte Order.**
+Each cell is one byte, the 6 most significant bits in the high bytes
+are 0.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - B\ :sub:`00low`
+      - B\ :sub:`00high`
+      - G\ :sub:`01low`
+      - G\ :sub:`01high`
+      - B\ :sub:`02low`
+      - B\ :sub:`02high`
+      - G\ :sub:`03low`
+      - G\ :sub:`03high`
+    * - start + 8:
+      - G\ :sub:`10low`
+      - G\ :sub:`10high`
+      - R\ :sub:`11low`
+      - R\ :sub:`11high`
+      - G\ :sub:`12low`
+      - G\ :sub:`12high`
+      - R\ :sub:`13low`
+      - R\ :sub:`13high`
+    * - start + 16:
+      - B\ :sub:`20low`
+      - B\ :sub:`20high`
+      - G\ :sub:`21low`
+      - G\ :sub:`21high`
+      - B\ :sub:`22low`
+      - B\ :sub:`22high`
+      - G\ :sub:`23low`
+      - G\ :sub:`23high`
+    * - start + 24:
+      - G\ :sub:`30low`
+      - G\ :sub:`30high`
+      - R\ :sub:`31low`
+      - R\ :sub:`31high`
+      - G\ :sub:`32low`
+      - G\ :sub:`32high`
+      - R\ :sub:`33low`
+      - R\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst
new file mode 100644
index 000000000000..f1b8627f0141
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst
@@ -0,0 +1,31 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SBGGR10ALAW8:
+.. _v4l2-pix-fmt-sgbrg10alaw8:
+.. _v4l2-pix-fmt-sgrbg10alaw8:
+.. _v4l2-pix-fmt-srggb10alaw8:
+
+***********************************************************************************************************************************************
+V4L2_PIX_FMT_SBGGR10ALAW8 ('aBA8'), V4L2_PIX_FMT_SGBRG10ALAW8 ('aGA8'), V4L2_PIX_FMT_SGRBG10ALAW8 ('agA8'), V4L2_PIX_FMT_SRGGB10ALAW8 ('aRA8'),
+***********************************************************************************************************************************************
+
+V4L2_PIX_FMT_SGBRG10ALAW8
+V4L2_PIX_FMT_SGRBG10ALAW8
+V4L2_PIX_FMT_SRGGB10ALAW8
+10-bit Bayer formats compressed to 8 bits
+
+
+Description
+===========
+
+These four pixel formats are raw sRGB / Bayer formats with 10 bits per
+color compressed to 8 bits each, using the A-LAW algorithm. Each color
+component consumes 8 bits of memory. In other respects this format is
+similar to :ref:`V4L2-PIX-FMT-SRGGB8`.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst
new file mode 100644
index 000000000000..9814c4ffac68
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst
@@ -0,0 +1,35 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SBGGR10DPCM8:
+.. _v4l2-pix-fmt-sgbrg10dpcm8:
+.. _v4l2-pix-fmt-sgrbg10dpcm8:
+.. _v4l2-pix-fmt-srggb10dpcm8:
+
+
+***********************************************************************************************************************************************
+V4L2_PIX_FMT_SBGGR10DPCM8 ('bBA8'), V4L2_PIX_FMT_SGBRG10DPCM8 ('bGA8'), V4L2_PIX_FMT_SGRBG10DPCM8 ('BD10'), V4L2_PIX_FMT_SRGGB10DPCM8 ('bRA8'),
+***********************************************************************************************************************************************
+
+*man V4L2_PIX_FMT_SBGGR10DPCM8(2)*
+
+V4L2_PIX_FMT_SGBRG10DPCM8
+V4L2_PIX_FMT_SGRBG10DPCM8
+V4L2_PIX_FMT_SRGGB10DPCM8
+10-bit Bayer formats compressed to 8 bits
+
+
+Description
+===========
+
+These four pixel formats are raw sRGB / Bayer formats with 10 bits per
+colour compressed to 8 bits each, using DPCM compression. DPCM,
+differential pulse-code modulation, is lossy. Each colour component
+consumes 8 bits of memory. In other respects this format is similar to
+:ref:`V4L2-PIX-FMT-SRGGB10`.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst
new file mode 100644
index 000000000000..76a4d278e640
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst
@@ -0,0 +1,81 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SRGGB10P:
+.. _v4l2-pix-fmt-sbggr10p:
+.. _v4l2-pix-fmt-sgbrg10p:
+.. _v4l2-pix-fmt-sgrbg10p:
+
+*******************************************************************************************************************************
+V4L2_PIX_FMT_SRGGB10P ('pRAA'), V4L2_PIX_FMT_SGRBG10P ('pgAA'), V4L2_PIX_FMT_SGBRG10P ('pGAA'), V4L2_PIX_FMT_SBGGR10P ('pBAA'),
+*******************************************************************************************************************************
+
+
+V4L2_PIX_FMT_SGRBG10P
+V4L2_PIX_FMT_SGBRG10P
+V4L2_PIX_FMT_SBGGR10P
+10-bit packed Bayer formats
+
+
+Description
+===========
+
+These four pixel formats are packed raw sRGB / Bayer formats with 10
+bits per sample. Every four consecutive samples are packed into 5
+bytes. Each of the first 4 bytes contain the 8 high order bits
+of the pixels, and the 5th byte contains the 2 least significants
+bits of each pixel, in the same order.
+
+Each n-pixel row contains n/2 green samples and n/2 blue or red samples,
+with alternating green-red and green-blue rows. They are conventionally
+described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example
+of a small V4L2_PIX_FMT_SBGGR10P image:
+
+**Byte Order.**
+Each cell is one byte.
+
+.. tabularcolumns:: |p{2.4cm}|p{1.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{6.4cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 12 8 8 8 8 68
+
+    * - start + 0:
+      - B\ :sub:`00high`
+      - G\ :sub:`01high`
+      - B\ :sub:`02high`
+      - G\ :sub:`03high`
+      - G\ :sub:`03low`\ (bits 7--6) B\ :sub:`02low`\ (bits 5--4)
+
+	G\ :sub:`01low`\ (bits 3--2) B\ :sub:`00low`\ (bits 1--0)
+    * - start + 5:
+      - G\ :sub:`10high`
+      - R\ :sub:`11high`
+      - G\ :sub:`12high`
+      - R\ :sub:`13high`
+      - R\ :sub:`13low`\ (bits 7--6) G\ :sub:`12low`\ (bits 5--4)
+
+	R\ :sub:`11low`\ (bits 3--2) G\ :sub:`10low`\ (bits 1--0)
+    * - start + 10:
+      - B\ :sub:`20high`
+      - G\ :sub:`21high`
+      - B\ :sub:`22high`
+      - G\ :sub:`23high`
+      - G\ :sub:`23low`\ (bits 7--6) B\ :sub:`22low`\ (bits 5--4)
+
+	G\ :sub:`21low`\ (bits 3--2) B\ :sub:`20low`\ (bits 1--0)
+    * - start + 15:
+      - G\ :sub:`30high`
+      - R\ :sub:`31high`
+      - G\ :sub:`32high`
+      - R\ :sub:`33high`
+      - R\ :sub:`33low`\ (bits 7--6) G\ :sub:`32low`\ (bits 5--4)
+
+	R\ :sub:`31low`\ (bits 3--2) G\ :sub:`30low`\ (bits 1--0)
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst
new file mode 100644
index 000000000000..98ae80b968ae
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst
@@ -0,0 +1,84 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SRGGB12:
+.. _v4l2-pix-fmt-sbggr12:
+.. _v4l2-pix-fmt-sgbrg12:
+.. _v4l2-pix-fmt-sgrbg12:
+
+
+***************************************************************************************************************************
+V4L2_PIX_FMT_SRGGB12 ('RG12'), V4L2_PIX_FMT_SGRBG12 ('BA12'), V4L2_PIX_FMT_SGBRG12 ('GB12'), V4L2_PIX_FMT_SBGGR12 ('BG12'),
+***************************************************************************************************************************
+
+
+V4L2_PIX_FMT_SGRBG12
+V4L2_PIX_FMT_SGBRG12
+V4L2_PIX_FMT_SBGGR12
+12-bit Bayer formats expanded to 16 bits
+
+
+Description
+===========
+
+These four pixel formats are raw sRGB / Bayer formats with 12 bits per
+colour. Each colour component is stored in a 16-bit word, with 4 unused
+high bits filled with zeros. Each n-pixel row contains n/2 green samples
+and n/2 blue or red samples, with alternating red and blue rows. Bytes
+are stored in memory in little endian order. They are conventionally
+described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example
+of a small V4L2_PIX_FMT_SBGGR12 image:
+
+**Byte Order.**
+Each cell is one byte, the 4 most significant bits in the high bytes are
+0.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - B\ :sub:`00low`
+      - B\ :sub:`00high`
+      - G\ :sub:`01low`
+      - G\ :sub:`01high`
+      - B\ :sub:`02low`
+      - B\ :sub:`02high`
+      - G\ :sub:`03low`
+      - G\ :sub:`03high`
+    * - start + 8:
+      - G\ :sub:`10low`
+      - G\ :sub:`10high`
+      - R\ :sub:`11low`
+      - R\ :sub:`11high`
+      - G\ :sub:`12low`
+      - G\ :sub:`12high`
+      - R\ :sub:`13low`
+      - R\ :sub:`13high`
+    * - start + 16:
+      - B\ :sub:`20low`
+      - B\ :sub:`20high`
+      - G\ :sub:`21low`
+      - G\ :sub:`21high`
+      - B\ :sub:`22low`
+      - B\ :sub:`22high`
+      - G\ :sub:`23low`
+      - G\ :sub:`23high`
+    * - start + 24:
+      - G\ :sub:`30low`
+      - G\ :sub:`30high`
+      - R\ :sub:`31low`
+      - R\ :sub:`31high`
+      - G\ :sub:`32low`
+      - G\ :sub:`32high`
+      - R\ :sub:`33low`
+      - R\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst
new file mode 100644
index 000000000000..7309dd7fa60f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst
@@ -0,0 +1,94 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SRGGB12P:
+.. _v4l2-pix-fmt-sbggr12p:
+.. _v4l2-pix-fmt-sgbrg12p:
+.. _v4l2-pix-fmt-sgrbg12p:
+
+*******************************************************************************************************************************
+V4L2_PIX_FMT_SRGGB12P ('pRCC'), V4L2_PIX_FMT_SGRBG12P ('pgCC'), V4L2_PIX_FMT_SGBRG12P ('pGCC'), V4L2_PIX_FMT_SBGGR12P ('pBCC'),
+*******************************************************************************************************************************
+
+
+12-bit packed Bayer formats
+---------------------------
+
+
+Description
+===========
+
+These four pixel formats are packed raw sRGB / Bayer formats with 12
+bits per colour. Every two consecutive samples are packed into three
+bytes. Each of the first two bytes contain the 8 high order bits of
+the pixels, and the third byte contains the four least significants
+bits of each pixel, in the same order.
+
+Each n-pixel row contains n/2 green samples and n/2 blue or red
+samples, with alternating green-red and green-blue rows. They are
+conventionally described as GRGR... BGBG..., RGRG... GBGB..., etc.
+Below is an example of a small V4L2_PIX_FMT_SBGGR12P image:
+
+**Byte Order.**
+Each cell is one byte.
+
+.. tabularcolumns:: |p{2.2cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       2 1 1 1 1 1 1
+
+
+    -  -  start + 0:
+       -  B\ :sub:`00high`
+       -  G\ :sub:`01high`
+       -  G\ :sub:`01low`\ (bits 7--4)
+
+          B\ :sub:`00low`\ (bits 3--0)
+       -  B\ :sub:`02high`
+       -  G\ :sub:`03high`
+       -  G\ :sub:`03low`\ (bits 7--4)
+
+          B\ :sub:`02low`\ (bits 3--0)
+
+    -  -  start + 6:
+       -  G\ :sub:`10high`
+       -  R\ :sub:`11high`
+       -  R\ :sub:`11low`\ (bits 7--4)
+
+          G\ :sub:`10low`\ (bits 3--0)
+       -  G\ :sub:`12high`
+       -  R\ :sub:`13high`
+       -  R\ :sub:`13low`\ (bits 3--2)
+
+          G\ :sub:`12low`\ (bits 3--0)
+    -  -  start + 12:
+       -  B\ :sub:`20high`
+       -  G\ :sub:`21high`
+       -  G\ :sub:`21low`\ (bits 7--4)
+
+          B\ :sub:`20low`\ (bits 3--0)
+       -  B\ :sub:`22high`
+       -  G\ :sub:`23high`
+       -  G\ :sub:`23low`\ (bits 7--4)
+
+          B\ :sub:`22low`\ (bits 3--0)
+    -  -  start + 18:
+       -  G\ :sub:`30high`
+       -  R\ :sub:`31high`
+       -  R\ :sub:`31low`\ (bits 7--4)
+
+          G\ :sub:`30low`\ (bits 3--0)
+       -  G\ :sub:`32high`
+       -  R\ :sub:`33high`
+       -  R\ :sub:`33low`\ (bits 3--2)
+
+          G\ :sub:`32low`\ (bits 3--0)
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst
new file mode 100644
index 000000000000..a4c7a392fe7f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst
@@ -0,0 +1,82 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SRGGB14:
+.. _v4l2-pix-fmt-sbggr14:
+.. _v4l2-pix-fmt-sgbrg14:
+.. _v4l2-pix-fmt-sgrbg14:
+
+
+***************************************************************************************************************************
+V4L2_PIX_FMT_SRGGB14 ('RG14'), V4L2_PIX_FMT_SGRBG14 ('GR14'), V4L2_PIX_FMT_SGBRG14 ('GB14'), V4L2_PIX_FMT_SBGGR14 ('BG14'),
+***************************************************************************************************************************
+
+
+14-bit Bayer formats expanded to 16 bits
+
+
+Description
+===========
+
+These four pixel formats are raw sRGB / Bayer formats with 14 bits per
+colour. Each sample is stored in a 16-bit word, with two unused high
+bits filled with zeros. Each n-pixel row contains n/2 green samples
+and n/2 blue or red samples, with alternating red and blue rows. Bytes
+are stored in memory in little endian order. They are conventionally
+described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an
+example of a small V4L2_PIX_FMT_SBGGR14 image:
+
+**Byte Order.**
+Each cell is one byte, the two most significant bits in the high bytes are
+zero.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       2 1 1 1 1 1 1 1 1
+
+
+    * - start + 0:
+      - B\ :sub:`00low`
+      - B\ :sub:`00high`
+      - G\ :sub:`01low`
+      - G\ :sub:`01high`
+      - B\ :sub:`02low`
+      - B\ :sub:`02high`
+      - G\ :sub:`03low`
+      - G\ :sub:`03high`
+    * - start + 8:
+      - G\ :sub:`10low`
+      - G\ :sub:`10high`
+      - R\ :sub:`11low`
+      - R\ :sub:`11high`
+      - G\ :sub:`12low`
+      - G\ :sub:`12high`
+      - R\ :sub:`13low`
+      - R\ :sub:`13high`
+    * - start + 16:
+      - B\ :sub:`20low`
+      - B\ :sub:`20high`
+      - G\ :sub:`21low`
+      - G\ :sub:`21high`
+      - B\ :sub:`22low`
+      - B\ :sub:`22high`
+      - G\ :sub:`23low`
+      - G\ :sub:`23high`
+    * - start + 24:
+      - G\ :sub:`30low`
+      - G\ :sub:`30high`
+      - R\ :sub:`31low`
+      - R\ :sub:`31high`
+      - G\ :sub:`32low`
+      - G\ :sub:`32high`
+      - R\ :sub:`33low`
+      - R\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst
new file mode 100644
index 000000000000..ec1239ada316
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst
@@ -0,0 +1,152 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SRGGB14P:
+.. _v4l2-pix-fmt-sbggr14p:
+.. _v4l2-pix-fmt-sgbrg14p:
+.. _v4l2-pix-fmt-sgrbg14p:
+
+*******************************************************************************************************************************
+V4L2_PIX_FMT_SRGGB14P ('pREE'), V4L2_PIX_FMT_SGRBG14P ('pgEE'), V4L2_PIX_FMT_SGBRG14P ('pGEE'), V4L2_PIX_FMT_SBGGR14P ('pBEE'),
+*******************************************************************************************************************************
+
+*man V4L2_PIX_FMT_SRGGB14P(2)*
+
+V4L2_PIX_FMT_SGRBG14P
+V4L2_PIX_FMT_SGBRG14P
+V4L2_PIX_FMT_SBGGR14P
+14-bit packed Bayer formats
+
+
+Description
+===========
+
+These four pixel formats are packed raw sRGB / Bayer formats with 14
+bits per colour. Every four consecutive samples are packed into seven
+bytes. Each of the first four bytes contain the eight high order bits
+of the pixels, and the three following bytes contains the six least
+significants bits of each pixel, in the same order.
+
+Each n-pixel row contains n/2 green samples and n/2 blue or red samples,
+with alternating green-red and green-blue rows. They are conventionally
+described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example
+of one of these formats:
+
+**Byte Order.**
+Each cell is one byte.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{1.8cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{1.1cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       2 1 1 1 1 3 3 3
+
+
+    -  .. row 1
+
+       -  start + 0
+
+       -  B\ :sub:`00high`
+
+       -  G\ :sub:`01high`
+
+       -  B\ :sub:`02high`
+
+       -  G\ :sub:`03high`
+
+       -  G\ :sub:`01low bits 1--0`\ (bits 7--6)
+
+	  B\ :sub:`00low bits 5--0`\ (bits 5--0)
+
+       -  R\ :sub:`02low bits 3--0`\ (bits 7--4)
+
+	  G\ :sub:`01low bits 5--2`\ (bits 3--0)
+
+       -  G\ :sub:`03low bits 5--0`\ (bits 7--2)
+
+	  R\ :sub:`02low bits 5--4`\ (bits 1--0)
+
+    -  .. row 2
+
+       -  start + 7
+
+       -  G\ :sub:`00high`
+
+       -  R\ :sub:`01high`
+
+       -  G\ :sub:`02high`
+
+       -  R\ :sub:`03high`
+
+       -  R\ :sub:`01low bits 1--0`\ (bits 7--6)
+
+	  G\ :sub:`00low bits 5--0`\ (bits 5--0)
+
+       -  G\ :sub:`02low bits 3--0`\ (bits 7--4)
+
+	  R\ :sub:`01low bits 5--2`\ (bits 3--0)
+
+       -  R\ :sub:`03low bits 5--0`\ (bits 7--2)
+
+	  G\ :sub:`02low bits 5--4`\ (bits 1--0)
+
+    -  .. row 3
+
+       -  start + 14
+
+       -  B\ :sub:`20high`
+
+       -  G\ :sub:`21high`
+
+       -  B\ :sub:`22high`
+
+       -  G\ :sub:`23high`
+
+       -  G\ :sub:`21low bits 1--0`\ (bits 7--6)
+
+	  B\ :sub:`20low bits 5--0`\ (bits 5--0)
+
+       -  R\ :sub:`22low bits 3--0`\ (bits 7--4)
+
+	  G\ :sub:`21low bits 5--2`\ (bits 3--0)
+
+       -  G\ :sub:`23low bits 5--0`\ (bits 7--2)
+
+	  R\ :sub:`22low bits 5--4`\ (bits 1--0)
+
+    -  .. row 4
+
+       -  start + 21
+
+       -  G\ :sub:`30high`
+
+       -  R\ :sub:`31high`
+
+       -  G\ :sub:`32high`
+
+       -  R\ :sub:`33high`
+
+       -  R\ :sub:`31low bits 1--0`\ (bits 7--6)
+	  G\ :sub:`30low bits 5--0`\ (bits 5--0)
+
+       -  G\ :sub:`32low bits 3--0`\ (bits 7--4)
+	  R\ :sub:`31low bits 5--2`\ (bits 3--0)
+
+       -  R\ :sub:`33low bits 5--0`\ (bits 7--2)
+	  G\ :sub:`32low bits 5--4`\ (bits 1--0)
+
+.. raw:: latex
+
+    \normalsize
+
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst
new file mode 100644
index 000000000000..885f0d1f331d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst
@@ -0,0 +1,76 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SRGGB16:
+.. _v4l2-pix-fmt-sbggr16:
+.. _v4l2-pix-fmt-sgbrg16:
+.. _v4l2-pix-fmt-sgrbg16:
+
+
+***************************************************************************************************************************
+V4L2_PIX_FMT_SRGGB16 ('RG16'), V4L2_PIX_FMT_SGRBG16 ('GR16'), V4L2_PIX_FMT_SGBRG16 ('GB16'), V4L2_PIX_FMT_SBGGR16 ('BYR2'),
+***************************************************************************************************************************
+
+
+16-bit Bayer formats
+
+
+Description
+===========
+
+These four pixel formats are raw sRGB / Bayer formats with 16 bits per
+sample. Each sample is stored in a 16-bit word. Each n-pixel row contains
+n/2 green samples and n/2 blue or red samples, with alternating red and blue
+rows. Bytes are stored in memory in little endian order. They are
+conventionally described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is
+an example of a small V4L2_PIX_FMT_SBGGR16 image:
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - B\ :sub:`00low`
+      - B\ :sub:`00high`
+      - G\ :sub:`01low`
+      - G\ :sub:`01high`
+      - B\ :sub:`02low`
+      - B\ :sub:`02high`
+      - G\ :sub:`03low`
+      - G\ :sub:`03high`
+    * - start + 8:
+      - G\ :sub:`10low`
+      - G\ :sub:`10high`
+      - R\ :sub:`11low`
+      - R\ :sub:`11high`
+      - G\ :sub:`12low`
+      - G\ :sub:`12high`
+      - R\ :sub:`13low`
+      - R\ :sub:`13high`
+    * - start + 16:
+      - B\ :sub:`20low`
+      - B\ :sub:`20high`
+      - G\ :sub:`21low`
+      - G\ :sub:`21high`
+      - B\ :sub:`22low`
+      - B\ :sub:`22high`
+      - G\ :sub:`23low`
+      - G\ :sub:`23high`
+    * - start + 24:
+      - G\ :sub:`30low`
+      - G\ :sub:`30high`
+      - R\ :sub:`31low`
+      - R\ :sub:`31high`
+      - G\ :sub:`32low`
+      - G\ :sub:`32high`
+      - R\ :sub:`33low`
+      - R\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst
new file mode 100644
index 000000000000..c275e6ef09f9
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst
@@ -0,0 +1,61 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-SRGGB8:
+.. _v4l2-pix-fmt-sbggr8:
+.. _v4l2-pix-fmt-sgbrg8:
+.. _v4l2-pix-fmt-sgrbg8:
+
+***************************************************************************************************************************
+V4L2_PIX_FMT_SRGGB8 ('RGGB'), V4L2_PIX_FMT_SGRBG8 ('GRBG'), V4L2_PIX_FMT_SGBRG8 ('GBRG'), V4L2_PIX_FMT_SBGGR8 ('BA81'),
+***************************************************************************************************************************
+
+
+8-bit Bayer formats
+
+
+Description
+===========
+
+These four pixel formats are raw sRGB / Bayer formats with 8 bits per
+sample. Each sample is stored in a byte. Each n-pixel row contains n/2
+green samples and n/2 blue or red samples, with alternating red and
+blue rows. They are conventionally described as GRGR... BGBG...,
+RGRG... GBGB..., etc. Below is an example of a small V4L2_PIX_FMT_SBGGR8 image:
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - B\ :sub:`00`
+      - G\ :sub:`01`
+      - B\ :sub:`02`
+      - G\ :sub:`03`
+    * - start + 4:
+      - G\ :sub:`10`
+      - R\ :sub:`11`
+      - G\ :sub:`12`
+      - R\ :sub:`13`
+    * - start + 8:
+      - B\ :sub:`20`
+      - G\ :sub:`21`
+      - B\ :sub:`22`
+      - G\ :sub:`23`
+    * - start + 12:
+      - G\ :sub:`30`
+      - R\ :sub:`31`
+      - G\ :sub:`32`
+      - R\ :sub:`33`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst
new file mode 100644
index 000000000000..165c9be2bfc5
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst
@@ -0,0 +1,59 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-TCH-FMT-DELTA-TD08:
+
+********************************
+V4L2_TCH_FMT_DELTA_TD08 ('TD08')
+********************************
+
+*man V4L2_TCH_FMT_DELTA_TD08(2)*
+
+8-bit signed Touch Delta
+
+Description
+===========
+
+This format represents delta data from a touch controller.
+
+Delta values may range from -128 to 127. Typically the values will vary through
+a small range depending on whether the sensor is touched or not. The full value
+may be seen if one of the touchscreen nodes has a fault or the line is not
+connected.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       2 1 1 1 1
+
+    * - start + 0:
+      - D'\ :sub:`00`
+      - D'\ :sub:`01`
+      - D'\ :sub:`02`
+      - D'\ :sub:`03`
+    * - start + 4:
+      - D'\ :sub:`10`
+      - D'\ :sub:`11`
+      - D'\ :sub:`12`
+      - D'\ :sub:`13`
+    * - start + 8:
+      - D'\ :sub:`20`
+      - D'\ :sub:`21`
+      - D'\ :sub:`22`
+      - D'\ :sub:`23`
+    * - start + 12:
+      - D'\ :sub:`30`
+      - D'\ :sub:`31`
+      - D'\ :sub:`32`
+      - D'\ :sub:`33`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst
new file mode 100644
index 000000000000..6dca01182175
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst
@@ -0,0 +1,74 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-TCH-FMT-DELTA-TD16:
+
+********************************
+V4L2_TCH_FMT_DELTA_TD16 ('TD16')
+********************************
+
+*man V4L2_TCH_FMT_DELTA_TD16(2)*
+
+16-bit signed little endian Touch Delta
+
+
+Description
+===========
+
+This format represents delta data from a touch controller.
+
+Delta values may range from -32768 to 32767. Typically the values will vary
+through a small range depending on whether the sensor is touched or not. The
+full value may be seen if one of the touchscreen nodes has a fault or the line
+is not connected.
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       2 1 1 1 1 1 1 1 1
+
+    * - start + 0:
+      - D'\ :sub:`00low`
+      - D'\ :sub:`00high`
+      - D'\ :sub:`01low`
+      - D'\ :sub:`01high`
+      - D'\ :sub:`02low`
+      - D'\ :sub:`02high`
+      - D'\ :sub:`03low`
+      - D'\ :sub:`03high`
+    * - start + 8:
+      - D'\ :sub:`10low`
+      - D'\ :sub:`10high`
+      - D'\ :sub:`11low`
+      - D'\ :sub:`11high`
+      - D'\ :sub:`12low`
+      - D'\ :sub:`12high`
+      - D'\ :sub:`13low`
+      - D'\ :sub:`13high`
+    * - start + 16:
+      - D'\ :sub:`20low`
+      - D'\ :sub:`20high`
+      - D'\ :sub:`21low`
+      - D'\ :sub:`21high`
+      - D'\ :sub:`22low`
+      - D'\ :sub:`22high`
+      - D'\ :sub:`23low`
+      - D'\ :sub:`23high`
+    * - start + 24:
+      - D'\ :sub:`30low`
+      - D'\ :sub:`30high`
+      - D'\ :sub:`31low`
+      - D'\ :sub:`31high`
+      - D'\ :sub:`32low`
+      - D'\ :sub:`32high`
+      - D'\ :sub:`33low`
+      - D'\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst
new file mode 100644
index 000000000000..f1380b72977f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst
@@ -0,0 +1,57 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-TCH-FMT-TU08:
+
+**************************
+V4L2_TCH_FMT_TU08 ('TU08')
+**************************
+
+*man V4L2_TCH_FMT_TU08(2)*
+
+8-bit unsigned raw touch data
+
+Description
+===========
+
+This format represents unsigned 8-bit data from a touch controller.
+
+This may be used for output for raw and reference data. Values may range from
+0 to 255.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       2 1 1 1 1
+
+    * - start + 0:
+      - R'\ :sub:`00`
+      - R'\ :sub:`01`
+      - R'\ :sub:`02`
+      - R'\ :sub:`03`
+    * - start + 4:
+      - R'\ :sub:`10`
+      - R'\ :sub:`11`
+      - R'\ :sub:`12`
+      - R'\ :sub:`13`
+    * - start + 8:
+      - R'\ :sub:`20`
+      - R'\ :sub:`21`
+      - R'\ :sub:`22`
+      - R'\ :sub:`23`
+    * - start + 12:
+      - R'\ :sub:`30`
+      - R'\ :sub:`31`
+      - R'\ :sub:`32`
+      - R'\ :sub:`33`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst
new file mode 100644
index 000000000000..2b9e1b15abcf
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst
@@ -0,0 +1,73 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-TCH-FMT-TU16:
+
+********************************
+V4L2_TCH_FMT_TU16 ('TU16')
+********************************
+
+*man V4L2_TCH_FMT_TU16(2)*
+
+16-bit unsigned little endian raw touch data
+
+
+Description
+===========
+
+This format represents unsigned 16-bit data from a touch controller.
+
+This may be used for output for raw and reference data. Values may range from
+0 to 65535.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       2 1 1 1 1 1 1 1 1
+
+    * - start + 0:
+      - R'\ :sub:`00low`
+      - R'\ :sub:`00high`
+      - R'\ :sub:`01low`
+      - R'\ :sub:`01high`
+      - R'\ :sub:`02low`
+      - R'\ :sub:`02high`
+      - R'\ :sub:`03low`
+      - R'\ :sub:`03high`
+    * - start + 8:
+      - R'\ :sub:`10low`
+      - R'\ :sub:`10high`
+      - R'\ :sub:`11low`
+      - R'\ :sub:`11high`
+      - R'\ :sub:`12low`
+      - R'\ :sub:`12high`
+      - R'\ :sub:`13low`
+      - R'\ :sub:`13high`
+    * - start + 16:
+      - R'\ :sub:`20low`
+      - R'\ :sub:`20high`
+      - R'\ :sub:`21low`
+      - R'\ :sub:`21high`
+      - R'\ :sub:`22low`
+      - R'\ :sub:`22high`
+      - R'\ :sub:`23low`
+      - R'\ :sub:`23high`
+    * - start + 24:
+      - R'\ :sub:`30low`
+      - R'\ :sub:`30high`
+      - R'\ :sub:`31low`
+      - R'\ :sub:`31high`
+      - R'\ :sub:`32low`
+      - R'\ :sub:`32high`
+      - R'\ :sub:`33low`
+      - R'\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst b/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst
new file mode 100644
index 000000000000..a36c1a4d64a4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-UV8:
+
+************************
+V4L2_PIX_FMT_UV8 ('UV8')
+************************
+
+
+UV plane interleaved
+
+
+Description
+===========
+
+In this format there is no Y plane, Only CbCr plane. ie (UV interleaved)
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Cb\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Cb\ :sub:`01`
+      - Cr\ :sub:`01`
+    * - start + 4:
+      - Cb\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Cb\ :sub:`11`
+      - Cr\ :sub:`11`
+    * - start + 8:
+      - Cb\ :sub:`20`
+      - Cr\ :sub:`20`
+      - Cb\ :sub:`21`
+      - Cr\ :sub:`21`
+    * - start + 12:
+      - Cb\ :sub:`30`
+      - Cr\ :sub:`30`
+      - Cb\ :sub:`31`
+      - Cr\ :sub:`31`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-uyvy.rst b/Documentation/userspace-api/media/v4l/pixfmt-uyvy.rst
new file mode 100644
index 000000000000..776cb37f76f1
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-uyvy.rst
@@ -0,0 +1,117 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-UYVY:
+
+**************************
+V4L2_PIX_FMT_UYVY ('UYVY')
+**************************
+
+
+Variation of ``V4L2_PIX_FMT_YUYV`` with different order of samples in
+memory
+
+
+Description
+===========
+
+In this format each four bytes is two pixels. Each four bytes is two
+Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr
+belong to both pixels. As you can see, the Cr and Cb components have
+half the horizontal resolution of the Y component.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Cb\ :sub:`00`
+      - Y'\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Cb\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Cr\ :sub:`01`
+      - Y'\ :sub:`03`
+    * - start + 8:
+      - Cb\ :sub:`10`
+      - Y'\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Cb\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Cr\ :sub:`11`
+      - Y'\ :sub:`13`
+    * - start + 16:
+      - Cb\ :sub:`20`
+      - Y'\ :sub:`20`
+      - Cr\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Cb\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Cr\ :sub:`21`
+      - Y'\ :sub:`23`
+    * - start + 24:
+      - Cb\ :sub:`30`
+      - Y'\ :sub:`30`
+      - Cr\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Cb\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Cr\ :sub:`31`
+      - Y'\ :sub:`33`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 1
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 2
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 3
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst
new file mode 100644
index 000000000000..444b4082684c
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst
@@ -0,0 +1,138 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+******************************
+Multi-planar format structures
+******************************
+
+The struct :c:type:`v4l2_plane_pix_format` structures define size
+and layout for each of the planes in a multi-planar format. The
+struct :c:type:`v4l2_pix_format_mplane` structure contains
+information common to all planes (such as image width and height) and an
+array of struct :c:type:`v4l2_plane_pix_format` structures,
+describing all planes of that format.
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_plane_pix_format
+
+.. flat-table:: struct v4l2_plane_pix_format
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``sizeimage``
+      - Maximum size in bytes required for image data in this plane,
+	set by the driver. When the image consists of variable length
+	compressed data this is the number of bytes required by the
+	codec to support the worst-case compression scenario.
+
+	The driver will set the value for uncompressed images.
+
+	Clients are allowed to set the sizeimage field for variable length
+	compressed data flagged with ``V4L2_FMT_FLAG_COMPRESSED`` at
+	:ref:`VIDIOC_ENUM_FMT`, but the driver may ignore it and set the
+	value itself, or it may modify the provided value based on
+	alignment requirements or minimum/maximum size requirements.
+	If the client wants to leave this to the driver, then it should
+	set sizeimage to 0.
+    * - __u32
+      - ``bytesperline``
+      - Distance in bytes between the leftmost pixels in two adjacent
+	lines. See struct :c:type:`v4l2_pix_format`.
+    * - __u16
+      - ``reserved[6]``
+      - Reserved for future extensions. Should be zeroed by drivers and
+	applications.
+
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{4.4cm}|p{5.6cm}|p{7.5cm}|
+
+.. c:type:: v4l2_pix_format_mplane
+
+.. flat-table:: struct v4l2_pix_format_mplane
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``width``
+      - Image width in pixels. See struct
+	:c:type:`v4l2_pix_format`.
+    * - __u32
+      - ``height``
+      - Image height in pixels. See struct
+	:c:type:`v4l2_pix_format`.
+    * - __u32
+      - ``pixelformat``
+      - The pixel format. Both single- and multi-planar four character
+	codes can be used.
+    * - __u32
+      - ``field``
+      - Field order, from enum :c:type:`v4l2_field`.
+        See struct :c:type:`v4l2_pix_format`.
+    * - __u32
+      - ``colorspace``
+      - Colorspace encoding, from enum :c:type:`v4l2_colorspace`.
+        See struct :c:type:`v4l2_pix_format`.
+    * - struct :c:type:`v4l2_plane_pix_format`
+      - ``plane_fmt[VIDEO_MAX_PLANES]``
+      - An array of structures describing format of each plane this pixel
+	format consists of. The number of valid entries in this array has
+	to be put in the ``num_planes`` field.
+    * - __u8
+      - ``num_planes``
+      - Number of planes (i.e. separate memory buffers) for this format
+	and the number of valid entries in the ``plane_fmt`` array.
+    * - __u8
+      - ``flags``
+      - Flags set by the application or driver, see :ref:`format-flags`.
+    * - union {
+      - (anonymous)
+    * - __u8
+      - ``ycbcr_enc``
+      - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - __u8
+      - ``hsv_enc``
+      - HSV encoding, from enum :c:type:`v4l2_hsv_encoding`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - }
+      -
+    * - __u8
+      - ``quantization``
+      - Quantization range, from enum :c:type:`v4l2_quantization`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - __u8
+      - ``xfer_func``
+      - Transfer function, from enum :c:type:`v4l2_xfer_func`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - __u8
+      - ``reserved[7]``
+      - Reserved for future extensions. Should be zeroed by drivers and
+	applications.
+
+.. raw:: latex
+
+    \normalsize
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst
new file mode 100644
index 000000000000..759420a872d6
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst
@@ -0,0 +1,171 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+******************************
+Single-planar format structure
+******************************
+
+.. tabularcolumns:: |p{4.0cm}|p{2.5cm}|p{11.0cm}|
+
+.. c:type:: v4l2_pix_format
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_pix_format
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``width``
+      - Image width in pixels.
+    * - __u32
+      - ``height``
+      - Image height in pixels. If ``field`` is one of ``V4L2_FIELD_TOP``,
+	``V4L2_FIELD_BOTTOM`` or ``V4L2_FIELD_ALTERNATE`` then height
+	refers to the number of lines in the field, otherwise it refers to
+	the number of lines in the frame (which is twice the field height
+	for interlaced formats).
+    * - :cspan:`2` Applications set these fields to request an image
+	size, drivers return the closest possible values. In case of
+	planar formats the ``width`` and ``height`` applies to the largest
+	plane. To avoid ambiguities drivers must return values rounded up
+	to a multiple of the scale factor of any smaller planes. For
+	example when the image format is YUV 4:2:0, ``width`` and
+	``height`` must be multiples of two.
+
+	For compressed formats that contain the resolution information encoded
+	inside the stream, when fed to a stateful mem2mem decoder, the fields
+	may be zero to rely on the decoder to detect the right values. For more
+	details see :ref:`decoder` and format descriptions.
+    * - __u32
+      - ``pixelformat``
+      - The pixel format or type of compression, set by the application.
+	This is a little endian
+	:ref:`four character code <v4l2-fourcc>`. V4L2 defines standard
+	RGB formats in :ref:`pixfmt-rgb`, YUV formats in
+	:ref:`yuv-formats`, and reserved codes in
+	:ref:`reserved-formats`
+    * - __u32
+      - ``field``
+      - Field order, from enum :c:type:`v4l2_field`.
+        Video images are typically interlaced. Applications can request to
+	capture or output only the top or bottom field, or both fields
+	interlaced or sequentially stored in one buffer or alternating in
+	separate buffers. Drivers return the actual field order selected.
+	For more details on fields see :ref:`field-order`.
+    * - __u32
+      - ``bytesperline``
+      - Distance in bytes between the leftmost pixels in two adjacent
+	lines.
+    * - :cspan:`2`
+
+	Both applications and drivers can set this field to request
+	padding bytes at the end of each line. Drivers however may ignore
+	the value requested by the application, returning ``width`` times
+	bytes per pixel or a larger value required by the hardware. That
+	implies applications can just set this field to zero to get a
+	reasonable default.
+
+	Video hardware may access padding bytes, therefore they must
+	reside in accessible memory. Consider cases where padding bytes
+	after the last line of an image cross a system page boundary.
+	Input devices may write padding bytes, the value is undefined.
+	Output devices ignore the contents of padding bytes.
+
+	When the image format is planar the ``bytesperline`` value applies
+	to the first plane and is divided by the same factor as the
+	``width`` field for the other planes. For example the Cb and Cr
+	planes of a YUV 4:2:0 image have half as many padding bytes
+	following each line as the Y plane. To avoid ambiguities drivers
+	must return a ``bytesperline`` value rounded up to a multiple of
+	the scale factor.
+
+	For compressed formats the ``bytesperline`` value makes no sense.
+	Applications and drivers must set this to 0 in that case.
+    * - __u32
+      - ``sizeimage``
+      - Size in bytes of the buffer to hold a complete image, set by the
+	driver. Usually this is ``bytesperline`` times ``height``. When
+	the image consists of variable length compressed data this is the
+	number of bytes required by the codec to support the worst-case
+	compression scenario.
+
+	The driver will set the value for uncompressed images.
+
+	Clients are allowed to set the sizeimage field for variable length
+	compressed data flagged with ``V4L2_FMT_FLAG_COMPRESSED`` at
+	:ref:`VIDIOC_ENUM_FMT`, but the driver may ignore it and set the
+	value itself, or it may modify the provided value based on
+	alignment requirements or minimum/maximum size requirements.
+	If the client wants to leave this to the driver, then it should
+	set sizeimage to 0.
+    * - __u32
+      - ``colorspace``
+      - Image colorspace, from enum :c:type:`v4l2_colorspace`.
+        This information supplements the ``pixelformat`` and must be set
+	by the driver for capture streams and by the application for
+	output streams, see :ref:`colorspaces`.
+    * - __u32
+      - ``priv``
+      - This field indicates whether the remaining fields of the
+	struct :c:type:`v4l2_pix_format`, also called the
+	extended fields, are valid. When set to
+	``V4L2_PIX_FMT_PRIV_MAGIC``, it indicates that the extended fields
+	have been correctly initialized. When set to any other value it
+	indicates that the extended fields contain undefined values.
+
+	Applications that wish to use the pixel format extended fields
+	must first ensure that the feature is supported by querying the
+	device for the :ref:`V4L2_CAP_EXT_PIX_FORMAT <querycap>`
+	capability. If the capability isn't set the pixel format extended
+	fields are not supported and using the extended fields will lead
+	to undefined results.
+
+	To use the extended fields, applications must set the ``priv``
+	field to ``V4L2_PIX_FMT_PRIV_MAGIC``, initialize all the extended
+	fields and zero the unused bytes of the
+	struct :c:type:`v4l2_format` ``raw_data`` field.
+
+	When the ``priv`` field isn't set to ``V4L2_PIX_FMT_PRIV_MAGIC``
+	drivers must act as if all the extended fields were set to zero.
+	On return drivers must set the ``priv`` field to
+	``V4L2_PIX_FMT_PRIV_MAGIC`` and all the extended fields to
+	applicable values.
+    * - __u32
+      - ``flags``
+      - Flags set by the application or driver, see :ref:`format-flags`.
+    * - union {
+      - (anonymous)
+    * - __u32
+      - ``ycbcr_enc``
+      - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - __u32
+      - ``hsv_enc``
+      - HSV encoding, from enum :c:type:`v4l2_hsv_encoding`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - }
+      -
+    * - __u32
+      - ``quantization``
+      - Quantization range, from enum :c:type:`v4l2_quantization`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - __u32
+      - ``xfer_func``
+      - Transfer function, from enum :c:type:`v4l2_xfer_func`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-vyuy.rst b/Documentation/userspace-api/media/v4l/pixfmt-vyuy.rst
new file mode 100644
index 000000000000..6cd574e78e4c
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-vyuy.rst
@@ -0,0 +1,115 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-VYUY:
+
+**************************
+V4L2_PIX_FMT_VYUY ('VYUY')
+**************************
+
+
+Variation of ``V4L2_PIX_FMT_YUYV`` with different order of samples in
+memory
+
+
+Description
+===========
+
+In this format each four bytes is two pixels. Each four bytes is two
+Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr
+belong to both pixels. As you can see, the Cr and Cb components have
+half the horizontal resolution of the Y component.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Cr\ :sub:`00`
+      - Y'\ :sub:`00`
+      - Cb\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Cr\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Cb\ :sub:`01`
+      - Y'\ :sub:`03`
+    * - start + 8:
+      - Cr\ :sub:`10`
+      - Y'\ :sub:`10`
+      - Cb\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Cr\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Cb\ :sub:`11`
+      - Y'\ :sub:`13`
+    * - start + 16:
+      - Cr\ :sub:`20`
+      - Y'\ :sub:`20`
+      - Cb\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Cr\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Cb\ :sub:`21`
+      - Y'\ :sub:`23`
+    * - start + 24:
+      - Cr\ :sub:`30`
+      - Y'\ :sub:`30`
+      - Cb\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Cr\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Cb\ :sub:`31`
+      - Y'\ :sub:`33`
+
+
+**Color Sample Location:**
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      -
+      - 2
+      - 3
+    * - 0
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 1
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 2
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 3
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y10.rst b/Documentation/userspace-api/media/v4l/pixfmt-y10.rst
new file mode 100644
index 000000000000..dfb352ae6784
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y10.rst
@@ -0,0 +1,72 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y10:
+
+*************************
+V4L2_PIX_FMT_Y10 ('Y10 ')
+*************************
+
+
+Grey-scale image
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 10 bits per pixel. Pixels are
+stored in 16-bit words with unused high bits padded with 0. The least
+significant byte is stored at lower memory addresses (little-endian).
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00low`
+      - Y'\ :sub:`00high`
+      - Y'\ :sub:`01low`
+      - Y'\ :sub:`01high`
+      - Y'\ :sub:`02low`
+      - Y'\ :sub:`02high`
+      - Y'\ :sub:`03low`
+      - Y'\ :sub:`03high`
+    * - start + 8:
+      - Y'\ :sub:`10low`
+      - Y'\ :sub:`10high`
+      - Y'\ :sub:`11low`
+      - Y'\ :sub:`11high`
+      - Y'\ :sub:`12low`
+      - Y'\ :sub:`12high`
+      - Y'\ :sub:`13low`
+      - Y'\ :sub:`13high`
+    * - start + 16:
+      - Y'\ :sub:`20low`
+      - Y'\ :sub:`20high`
+      - Y'\ :sub:`21low`
+      - Y'\ :sub:`21high`
+      - Y'\ :sub:`22low`
+      - Y'\ :sub:`22high`
+      - Y'\ :sub:`23low`
+      - Y'\ :sub:`23high`
+    * - start + 24:
+      - Y'\ :sub:`30low`
+      - Y'\ :sub:`30high`
+      - Y'\ :sub:`31low`
+      - Y'\ :sub:`31high`
+      - Y'\ :sub:`32low`
+      - Y'\ :sub:`32high`
+      - Y'\ :sub:`33low`
+      - Y'\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y10b.rst b/Documentation/userspace-api/media/v4l/pixfmt-y10b.rst
new file mode 100644
index 000000000000..b5d89d6d5c52
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y10b.rst
@@ -0,0 +1,40 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y10BPACK:
+
+******************************
+V4L2_PIX_FMT_Y10BPACK ('Y10B')
+******************************
+
+Grey-scale image as a bit-packed array
+
+
+Description
+===========
+
+This is a packed grey-scale image format with a depth of 10 bits per
+pixel. Pixels are stored in a bit-packed array of 10bit bits per pixel,
+with no padding between them and with the most significant bits coming
+first from the left.
+
+**Bit-packed representation.**
+
+pixels cross the byte boundary and have a ratio of 5 bytes for each 4
+pixels.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Y'\ :sub:`00[9:2]`
+      - Y'\ :sub:`00[1:0]`\ Y'\ :sub:`01[9:4]`
+      - Y'\ :sub:`01[3:0]`\ Y'\ :sub:`02[9:6]`
+      - Y'\ :sub:`02[5:0]`\ Y'\ :sub:`03[9:8]`
+      - Y'\ :sub:`03[7:0]`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y10p.rst b/Documentation/userspace-api/media/v4l/pixfmt-y10p.rst
new file mode 100644
index 000000000000..ffb6e1631b78
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y10p.rst
@@ -0,0 +1,50 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y10P:
+
+******************************
+V4L2_PIX_FMT_Y10P ('Y10P')
+******************************
+
+Grey-scale image as a MIPI RAW10 packed array
+
+
+Description
+===========
+
+This is a packed grey-scale image format with a depth of 10 bits per
+pixel. Every four consecutive pixels are packed into 5 bytes. Each of
+the first 4 bytes contain the 8 high order bits of the pixels, and
+the 5th byte contains the 2 least significants bits of each pixel,
+in the same order.
+
+**Bit-packed representation.**
+
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{1.2cm}||p{1.2cm}||p{1.2cm}||p{1.2cm}|p{3.2cm}|p{3.2cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 8 8 8 8 64
+
+    * - Y'\ :sub:`00[9:2]`
+      - Y'\ :sub:`01[9:2]`
+      - Y'\ :sub:`02[9:2]`
+      - Y'\ :sub:`03[9:2]`
+      - Y'\ :sub:`03[1:0]`\ (bits 7--6) Y'\ :sub:`02[1:0]`\ (bits 5--4)
+	Y'\ :sub:`01[1:0]`\ (bits 3--2) Y'\ :sub:`00[1:0]`\ (bits 1--0)
+
+.. raw:: latex
+
+    \normalsize
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y12.rst b/Documentation/userspace-api/media/v4l/pixfmt-y12.rst
new file mode 100644
index 000000000000..4226c49232de
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y12.rst
@@ -0,0 +1,72 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y12:
+
+*************************
+V4L2_PIX_FMT_Y12 ('Y12 ')
+*************************
+
+
+Grey-scale image
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 12 bits per pixel. Pixels are
+stored in 16-bit words with unused high bits padded with 0. The least
+significant byte is stored at lower memory addresses (little-endian).
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00low`
+      - Y'\ :sub:`00high`
+      - Y'\ :sub:`01low`
+      - Y'\ :sub:`01high`
+      - Y'\ :sub:`02low`
+      - Y'\ :sub:`02high`
+      - Y'\ :sub:`03low`
+      - Y'\ :sub:`03high`
+    * - start + 8:
+      - Y'\ :sub:`10low`
+      - Y'\ :sub:`10high`
+      - Y'\ :sub:`11low`
+      - Y'\ :sub:`11high`
+      - Y'\ :sub:`12low`
+      - Y'\ :sub:`12high`
+      - Y'\ :sub:`13low`
+      - Y'\ :sub:`13high`
+    * - start + 16:
+      - Y'\ :sub:`20low`
+      - Y'\ :sub:`20high`
+      - Y'\ :sub:`21low`
+      - Y'\ :sub:`21high`
+      - Y'\ :sub:`22low`
+      - Y'\ :sub:`22high`
+      - Y'\ :sub:`23low`
+      - Y'\ :sub:`23high`
+    * - start + 24:
+      - Y'\ :sub:`30low`
+      - Y'\ :sub:`30high`
+      - Y'\ :sub:`31low`
+      - Y'\ :sub:`31high`
+      - Y'\ :sub:`32low`
+      - Y'\ :sub:`32high`
+      - Y'\ :sub:`33low`
+      - Y'\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst b/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst
new file mode 100644
index 000000000000..b4752754337b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst
@@ -0,0 +1,43 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y12I:
+
+**************************
+V4L2_PIX_FMT_Y12I ('Y12I')
+**************************
+
+Interleaved grey-scale image, e.g. from a stereo-pair
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 12 bits per pixel, but with
+pixels from 2 sources interleaved and bit-packed. Each pixel is stored
+in a 24-bit word in the little-endian order. On a little-endian machine
+these pixels can be deinterlaced using
+
+.. code-block:: c
+
+    __u8 *buf;
+    left0 = 0xfff & *(__u16 *)buf;
+    right0 = *(__u16 *)(buf + 1) >> 4;
+
+**Bit-packed representation.**
+pixels cross the byte boundary and have a ratio of 3 bytes for each
+interleaved pixel.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Y'\ :sub:`0left[7:0]`
+      - Y'\ :sub:`0right[3:0]`\ Y'\ :sub:`0left[11:8]`
+      - Y'\ :sub:`0right[11:4]`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y14.rst b/Documentation/userspace-api/media/v4l/pixfmt-y14.rst
new file mode 100644
index 000000000000..d702b6549160
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y14.rst
@@ -0,0 +1,72 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y14:
+
+*************************
+V4L2_PIX_FMT_Y14 ('Y14 ')
+*************************
+
+
+Grey-scale image
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 14 bits per pixel. Pixels are
+stored in 16-bit words with unused high bits padded with 0. The least
+significant byte is stored at lower memory addresses (little-endian).
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00low`
+      - Y'\ :sub:`00high`
+      - Y'\ :sub:`01low`
+      - Y'\ :sub:`01high`
+      - Y'\ :sub:`02low`
+      - Y'\ :sub:`02high`
+      - Y'\ :sub:`03low`
+      - Y'\ :sub:`03high`
+    * - start + 8:
+      - Y'\ :sub:`10low`
+      - Y'\ :sub:`10high`
+      - Y'\ :sub:`11low`
+      - Y'\ :sub:`11high`
+      - Y'\ :sub:`12low`
+      - Y'\ :sub:`12high`
+      - Y'\ :sub:`13low`
+      - Y'\ :sub:`13high`
+    * - start + 16:
+      - Y'\ :sub:`20low`
+      - Y'\ :sub:`20high`
+      - Y'\ :sub:`21low`
+      - Y'\ :sub:`21high`
+      - Y'\ :sub:`22low`
+      - Y'\ :sub:`22high`
+      - Y'\ :sub:`23low`
+      - Y'\ :sub:`23high`
+    * - start + 24:
+      - Y'\ :sub:`30low`
+      - Y'\ :sub:`30high`
+      - Y'\ :sub:`31low`
+      - Y'\ :sub:`31high`
+      - Y'\ :sub:`32low`
+      - Y'\ :sub:`32high`
+      - Y'\ :sub:`33low`
+      - Y'\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y16-be.rst b/Documentation/userspace-api/media/v4l/pixfmt-y16-be.rst
new file mode 100644
index 000000000000..f4eda7b95b51
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y16-be.rst
@@ -0,0 +1,76 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y16-BE:
+
+****************************************
+V4L2_PIX_FMT_Y16_BE ('Y16 ' | (1 << 31))
+****************************************
+
+
+Grey-scale image
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 16 bits per pixel. The most
+significant byte is stored at lower memory addresses (big-endian).
+
+.. note::
+
+   The actual sampling precision may be lower than 16 bits, for
+   example 10 bits per pixel with values in range 0 to 1023.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00high`
+      - Y'\ :sub:`00low`
+      - Y'\ :sub:`01high`
+      - Y'\ :sub:`01low`
+      - Y'\ :sub:`02high`
+      - Y'\ :sub:`02low`
+      - Y'\ :sub:`03high`
+      - Y'\ :sub:`03low`
+    * - start + 8:
+      - Y'\ :sub:`10high`
+      - Y'\ :sub:`10low`
+      - Y'\ :sub:`11high`
+      - Y'\ :sub:`11low`
+      - Y'\ :sub:`12high`
+      - Y'\ :sub:`12low`
+      - Y'\ :sub:`13high`
+      - Y'\ :sub:`13low`
+    * - start + 16:
+      - Y'\ :sub:`20high`
+      - Y'\ :sub:`20low`
+      - Y'\ :sub:`21high`
+      - Y'\ :sub:`21low`
+      - Y'\ :sub:`22high`
+      - Y'\ :sub:`22low`
+      - Y'\ :sub:`23high`
+      - Y'\ :sub:`23low`
+    * - start + 24:
+      - Y'\ :sub:`30high`
+      - Y'\ :sub:`30low`
+      - Y'\ :sub:`31high`
+      - Y'\ :sub:`31low`
+      - Y'\ :sub:`32high`
+      - Y'\ :sub:`32low`
+      - Y'\ :sub:`33high`
+      - Y'\ :sub:`33low`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y16.rst b/Documentation/userspace-api/media/v4l/pixfmt-y16.rst
new file mode 100644
index 000000000000..a092b0a5ff12
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y16.rst
@@ -0,0 +1,76 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y16:
+
+*************************
+V4L2_PIX_FMT_Y16 ('Y16 ')
+*************************
+
+
+Grey-scale image
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 16 bits per pixel. The least
+significant byte is stored at lower memory addresses (little-endian).
+
+.. note::
+
+   The actual sampling precision may be lower than 16 bits, for
+   example 10 bits per pixel with values in range 0 to 1023.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00low`
+      - Y'\ :sub:`00high`
+      - Y'\ :sub:`01low`
+      - Y'\ :sub:`01high`
+      - Y'\ :sub:`02low`
+      - Y'\ :sub:`02high`
+      - Y'\ :sub:`03low`
+      - Y'\ :sub:`03high`
+    * - start + 8:
+      - Y'\ :sub:`10low`
+      - Y'\ :sub:`10high`
+      - Y'\ :sub:`11low`
+      - Y'\ :sub:`11high`
+      - Y'\ :sub:`12low`
+      - Y'\ :sub:`12high`
+      - Y'\ :sub:`13low`
+      - Y'\ :sub:`13high`
+    * - start + 16:
+      - Y'\ :sub:`20low`
+      - Y'\ :sub:`20high`
+      - Y'\ :sub:`21low`
+      - Y'\ :sub:`21high`
+      - Y'\ :sub:`22low`
+      - Y'\ :sub:`22high`
+      - Y'\ :sub:`23low`
+      - Y'\ :sub:`23high`
+    * - start + 24:
+      - Y'\ :sub:`30low`
+      - Y'\ :sub:`30high`
+      - Y'\ :sub:`31low`
+      - Y'\ :sub:`31high`
+      - Y'\ :sub:`32low`
+      - Y'\ :sub:`32high`
+      - Y'\ :sub:`33low`
+      - Y'\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y41p.rst b/Documentation/userspace-api/media/v4l/pixfmt-y41p.rst
new file mode 100644
index 000000000000..211afd7593cc
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y41p.rst
@@ -0,0 +1,158 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y41P:
+
+**************************
+V4L2_PIX_FMT_Y41P ('Y41P')
+**************************
+
+
+Format with ¼ horizontal chroma resolution, also known as YUV 4:1:1
+
+
+Description
+===========
+
+In this format each 12 bytes is eight pixels. In the twelve bytes are
+two CbCr pairs and eight Y's. The first CbCr pair goes with the first
+four Y's, and the second CbCr pair goes with the other four Y's. The Cb
+and Cr components have one fourth the horizontal resolution of the Y
+component.
+
+Do not confuse this format with
+:ref:`V4L2_PIX_FMT_YUV411P <V4L2-PIX-FMT-YUV411P>`. Y41P is derived
+from "YUV 4:1:1 *packed*", while YUV411P stands for "YUV 4:1:1
+*planar*".
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Cb\ :sub:`00`
+      - Y'\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Cb\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Cr\ :sub:`01`
+      - Y'\ :sub:`03`
+      - Y'\ :sub:`04`
+      - Y'\ :sub:`05`
+      - Y'\ :sub:`06`
+      - Y'\ :sub:`07`
+    * - start + 12:
+      - Cb\ :sub:`10`
+      - Y'\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Cb\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Cr\ :sub:`11`
+      - Y'\ :sub:`13`
+      - Y'\ :sub:`14`
+      - Y'\ :sub:`15`
+      - Y'\ :sub:`16`
+      - Y'\ :sub:`17`
+    * - start + 24:
+      - Cb\ :sub:`20`
+      - Y'\ :sub:`20`
+      - Cr\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Cb\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Cr\ :sub:`21`
+      - Y'\ :sub:`23`
+      - Y'\ :sub:`24`
+      - Y'\ :sub:`25`
+      - Y'\ :sub:`26`
+      - Y'\ :sub:`27`
+    * - start + 36:
+      - Cb\ :sub:`30`
+      - Y'\ :sub:`30`
+      - Cr\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Cb\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Cr\ :sub:`31`
+      - Y'\ :sub:`33`
+      - Y'\ :sub:`34`
+      - Y'\ :sub:`35`
+      - Y'\ :sub:`36`
+      - Y'\ :sub:`37`
+
+
+**Color Sample Location:**
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      - 1
+      -
+      - 2
+      - 3
+      - 4
+      - 5
+      -
+      - 6
+      - 7
+    * - 0
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+    * - 1
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+    * - 2
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+    * - 3
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst b/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst
new file mode 100644
index 000000000000..4248c6f735b7
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst
@@ -0,0 +1,73 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Y8I:
+
+*************************
+V4L2_PIX_FMT_Y8I ('Y8I ')
+*************************
+
+
+Interleaved grey-scale image, e.g. from a stereo-pair
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 8 bits per pixel, but with
+pixels from 2 sources interleaved. Each pixel is stored in a 16-bit
+word. E.g. the R200 RealSense camera stores pixel from the left sensor
+in lower and from the right sensor in the higher 8 bits.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00left`
+      - Y'\ :sub:`00right`
+      - Y'\ :sub:`01left`
+      - Y'\ :sub:`01right`
+      - Y'\ :sub:`02left`
+      - Y'\ :sub:`02right`
+      - Y'\ :sub:`03left`
+      - Y'\ :sub:`03right`
+    * - start + 8:
+      - Y'\ :sub:`10left`
+      - Y'\ :sub:`10right`
+      - Y'\ :sub:`11left`
+      - Y'\ :sub:`11right`
+      - Y'\ :sub:`12left`
+      - Y'\ :sub:`12right`
+      - Y'\ :sub:`13left`
+      - Y'\ :sub:`13right`
+    * - start + 16:
+      - Y'\ :sub:`20left`
+      - Y'\ :sub:`20right`
+      - Y'\ :sub:`21left`
+      - Y'\ :sub:`21right`
+      - Y'\ :sub:`22left`
+      - Y'\ :sub:`22right`
+      - Y'\ :sub:`23left`
+      - Y'\ :sub:`23right`
+    * - start + 24:
+      - Y'\ :sub:`30left`
+      - Y'\ :sub:`30right`
+      - Y'\ :sub:`31left`
+      - Y'\ :sub:`31right`
+      - Y'\ :sub:`32left`
+      - Y'\ :sub:`32right`
+      - Y'\ :sub:`33left`
+      - Y'\ :sub:`33right`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv410.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv410.rst
new file mode 100644
index 000000000000..1d20115f2b1d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv410.rst
@@ -0,0 +1,134 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-YVU410:
+.. _v4l2-pix-fmt-yuv410:
+
+**********************************************************
+V4L2_PIX_FMT_YVU410 ('YVU9'), V4L2_PIX_FMT_YUV410 ('YUV9')
+**********************************************************
+
+
+V4L2_PIX_FMT_YUV410
+Planar formats with ¼ horizontal and vertical chroma resolution, also
+known as YUV 4:1:0
+
+
+Description
+===========
+
+These are planar formats, as opposed to a packed format. The three
+components are separated into three sub-images or planes. The Y plane is
+first. The Y plane has one byte per pixel. For ``V4L2_PIX_FMT_YVU410``,
+the Cr plane immediately follows the Y plane in memory. The Cr plane is
+¼ the width and ¼ the height of the Y plane (and of the image). Each Cr
+belongs to 16 pixels, a four-by-four square of the image. Following the
+Cr plane is the Cb plane, just like the Cr plane.
+``V4L2_PIX_FMT_YUV410`` is the same, except the Cb plane comes first,
+then the Cr plane.
+
+If the Y plane has pad bytes after each row, then the Cr and Cb planes
+have ¼ as many pad bytes after their rows. In other words, four Cx rows
+(including padding) are exactly as long as one Y row (including
+padding).
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * - start + 16:
+      - Cr\ :sub:`00`
+    * - start + 17:
+      - Cb\ :sub:`00`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      -
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
+    * -
+    * - 1
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
+    * -
+      -
+      -
+      -
+      - C
+      -
+      -
+      -
+    * - 2
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
+    * -
+    * - 3
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv411p.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv411p.rst
new file mode 100644
index 000000000000..967ba7ce41a2
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv411p.rst
@@ -0,0 +1,122 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-YUV411P:
+
+*****************************
+V4L2_PIX_FMT_YUV411P ('411P')
+*****************************
+
+
+Format with ¼ horizontal chroma resolution, also known as YUV 4:1:1.
+Planar layout as opposed to ``V4L2_PIX_FMT_Y41P``
+
+
+Description
+===========
+
+This format is not commonly used. This is a planar format similar to the
+4:2:2 planar format except with half as many chroma. The three
+components are separated into three sub-images or planes. The Y plane is
+first. The Y plane has one byte per pixel. The Cb plane immediately
+follows the Y plane in memory. The Cb plane is ¼ the width of the Y
+plane (and of the image). Each Cb belongs to 4 pixels all on the same
+row. For example, Cb\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`,
+Y'\ :sub:`02` and Y'\ :sub:`03`. Following the Cb plane is the Cr plane,
+just like the Cb plane.
+
+If the Y plane has pad bytes after each row, then the Cr and Cb planes
+have ¼ as many pad bytes after their rows. In other words, four C x rows
+(including padding) is exactly as long as one Y row (including padding).
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * - start + 16:
+      - Cb\ :sub:`00`
+    * - start + 17:
+      - Cb\ :sub:`10`
+    * - start + 18:
+      - Cb\ :sub:`20`
+    * - start + 19:
+      - Cb\ :sub:`30`
+    * - start + 20:
+      - Cr\ :sub:`00`
+    * - start + 21:
+      - Cr\ :sub:`10`
+    * - start + 22:
+      - Cr\ :sub:`20`
+    * - start + 23:
+      - Cr\ :sub:`30`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      - 1
+      -
+      - 2
+      - 3
+    * - 0
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+    * - 1
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+    * - 2
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
+    * - 3
+      - Y
+      - Y
+      - C
+      - Y
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv420.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv420.rst
new file mode 100644
index 000000000000..7cb685cc8289
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv420.rst
@@ -0,0 +1,150 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-YVU420:
+.. _V4L2-PIX-FMT-YUV420:
+
+**********************************************************
+V4L2_PIX_FMT_YVU420 ('YV12'), V4L2_PIX_FMT_YUV420 ('YU12')
+**********************************************************
+
+
+V4L2_PIX_FMT_YUV420
+Planar formats with ½ horizontal and vertical chroma resolution, also
+known as YUV 4:2:0
+
+
+Description
+===========
+
+These are planar formats, as opposed to a packed format. The three
+components are separated into three sub- images or planes. The Y plane
+is first. The Y plane has one byte per pixel. For
+``V4L2_PIX_FMT_YVU420``, the Cr plane immediately follows the Y plane in
+memory. The Cr plane is half the width and half the height of the Y
+plane (and of the image). Each Cr belongs to four pixels, a two-by-two
+square of the image. For example, Cr\ :sub:`0` belongs to Y'\ :sub:`00`,
+Y'\ :sub:`01`, Y'\ :sub:`10`, and Y'\ :sub:`11`. Following the Cr plane
+is the Cb plane, just like the Cr plane. ``V4L2_PIX_FMT_YUV420`` is the
+same except the Cb plane comes first, then the Cr plane.
+
+If the Y plane has pad bytes after each row, then the Cr and Cb planes
+have half as many pad bytes after their rows. In other words, two Cx
+rows (including padding) is exactly as long as one Y row (including
+padding).
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * - start + 16:
+      - Cr\ :sub:`00`
+      - Cr\ :sub:`01`
+    * - start + 18:
+      - Cr\ :sub:`10`
+      - Cr\ :sub:`11`
+    * - start + 20:
+      - Cb\ :sub:`00`
+      - Cb\ :sub:`01`
+    * - start + 22:
+      - Cb\ :sub:`10`
+      - Cb\ :sub:`11`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      -
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      -
+      - C
+      -
+    * - 1
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
+    * -
+    * - 2
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      -
+      - C
+      -
+    * - 3
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv420m.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv420m.rst
new file mode 100644
index 000000000000..80c14d4f5acb
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv420m.rst
@@ -0,0 +1,159 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-YUV420M:
+.. _v4l2-pix-fmt-yvu420m:
+
+************************************************************
+V4L2_PIX_FMT_YUV420M ('YM12'), V4L2_PIX_FMT_YVU420M ('YM21')
+************************************************************
+
+
+V4L2_PIX_FMT_YVU420M
+Variation of ``V4L2_PIX_FMT_YUV420`` and ``V4L2_PIX_FMT_YVU420`` with
+planes non contiguous in memory.
+
+
+Description
+===========
+
+This is a multi-planar format, as opposed to a packed format. The three
+components are separated into three sub-images or planes.
+
+The Y plane is first. The Y plane has one byte per pixel. For
+``V4L2_PIX_FMT_YUV420M`` the Cb data constitutes the second plane which
+is half the width and half the height of the Y plane (and of the image).
+Each Cb belongs to four pixels, a two-by-two square of the image. For
+example, Cb\ :sub:`0` belongs to Y'\ :sub:`00`, Y'\ :sub:`01`,
+Y'\ :sub:`10`, and Y'\ :sub:`11`. The Cr data, just like the Cb plane,
+is in the third plane.
+
+``V4L2_PIX_FMT_YVU420M`` is the same except the Cr data is stored in the
+second plane and the Cb data in the third plane.
+
+If the Y plane has pad bytes after each row, then the Cb and Cr planes
+have half as many pad bytes after their rows. In other words, two Cx
+rows (including padding) is exactly as long as one Y row (including
+padding).
+
+``V4L2_PIX_FMT_YUV420M`` and ``V4L2_PIX_FMT_YVU420M`` are intended to be
+used only in drivers and applications that support the multi-planar API,
+described in :ref:`planar-apis`.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start0 + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start0 + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start0 + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start0 + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * -
+    * - start1 + 0:
+      - Cb\ :sub:`00`
+      - Cb\ :sub:`01`
+    * - start1 + 2:
+      - Cb\ :sub:`10`
+      - Cb\ :sub:`11`
+    * -
+    * - start2 + 0:
+      - Cr\ :sub:`00`
+      - Cr\ :sub:`01`
+    * - start2 + 2:
+      - Cr\ :sub:`10`
+      - Cr\ :sub:`11`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      -
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      -
+      - C
+      -
+    * - 1
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
+    * -
+    * - 2
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
+    * -
+      -
+      - C
+      -
+      -
+      -
+      - C
+      -
+    * - 3
+      - Y
+      -
+      - Y
+      -
+      - Y
+      -
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv422m.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv422m.rst
new file mode 100644
index 000000000000..29b78480ccad
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv422m.rst
@@ -0,0 +1,148 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-YUV422M:
+.. _v4l2-pix-fmt-yvu422m:
+
+************************************************************
+V4L2_PIX_FMT_YUV422M ('YM16'), V4L2_PIX_FMT_YVU422M ('YM61')
+************************************************************
+
+
+V4L2_PIX_FMT_YVU422M
+Planar formats with ½ horizontal resolution, also known as YUV and YVU
+4:2:2
+
+
+Description
+===========
+
+This is a multi-planar format, as opposed to a packed format. The three
+components are separated into three sub-images or planes.
+
+The Y plane is first. The Y plane has one byte per pixel. For
+``V4L2_PIX_FMT_YUV422M`` the Cb data constitutes the second plane which
+is half the width of the Y plane (and of the image). Each Cb belongs to
+two pixels. For example, Cb\ :sub:`0` belongs to Y'\ :sub:`00`,
+Y'\ :sub:`01`. The Cr data, just like the Cb plane, is in the third
+plane.
+
+``V4L2_PIX_FMT_YVU422M`` is the same except the Cr data is stored in the
+second plane and the Cb data in the third plane.
+
+If the Y plane has pad bytes after each row, then the Cb and Cr planes
+have half as many pad bytes after their rows. In other words, two Cx
+rows (including padding) is exactly as long as one Y row (including
+padding).
+
+``V4L2_PIX_FMT_YUV422M`` and ``V4L2_PIX_FMT_YVU422M`` are intended to be
+used only in drivers and applications that support the multi-planar API,
+described in :ref:`planar-apis`.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start0 + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start0 + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start0 + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start0 + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * -
+    * - start1 + 0:
+      - Cb\ :sub:`00`
+      - Cb\ :sub:`01`
+    * - start1 + 2:
+      - Cb\ :sub:`10`
+      - Cb\ :sub:`11`
+    * - start1 + 4:
+      - Cb\ :sub:`20`
+      - Cb\ :sub:`21`
+    * - start1 + 6:
+      - Cb\ :sub:`30`
+      - Cb\ :sub:`31`
+    * -
+    * - start2 + 0:
+      - Cr\ :sub:`00`
+      - Cr\ :sub:`01`
+    * - start2 + 2:
+      - Cr\ :sub:`10`
+      - Cr\ :sub:`11`
+    * - start2 + 4:
+      - Cr\ :sub:`20`
+      - Cr\ :sub:`21`
+    * - start2 + 6:
+      - Cr\ :sub:`30`
+      - Cr\ :sub:`31`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 1
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 2
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 3
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv422p.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv422p.rst
new file mode 100644
index 000000000000..73fde222d820
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv422p.rst
@@ -0,0 +1,136 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-YUV422P:
+
+*****************************
+V4L2_PIX_FMT_YUV422P ('422P')
+*****************************
+
+
+Format with ½ horizontal chroma resolution, also known as YUV 4:2:2.
+Planar layout as opposed to ``V4L2_PIX_FMT_YUYV``
+
+
+Description
+===========
+
+This format is not commonly used. This is a planar version of the YUYV
+format. The three components are separated into three sub-images or
+planes. The Y plane is first. The Y plane has one byte per pixel. The Cb
+plane immediately follows the Y plane in memory. The Cb plane is half
+the width of the Y plane (and of the image). Each Cb belongs to two
+pixels. For example, Cb\ :sub:`0` belongs to Y'\ :sub:`00`,
+Y'\ :sub:`01`. Following the Cb plane is the Cr plane, just like the Cb
+plane.
+
+If the Y plane has pad bytes after each row, then the Cr and Cb planes
+have half as many pad bytes after their rows. In other words, two Cx
+rows (including padding) is exactly as long as one Y row (including
+padding).
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * - start + 16:
+      - Cb\ :sub:`00`
+      - Cb\ :sub:`01`
+    * - start + 18:
+      - Cb\ :sub:`10`
+      - Cb\ :sub:`11`
+    * - start + 20:
+      - Cb\ :sub:`20`
+      - Cb\ :sub:`21`
+    * - start + 22:
+      - Cb\ :sub:`30`
+      - Cb\ :sub:`31`
+    * - start + 24:
+      - Cr\ :sub:`00`
+      - Cr\ :sub:`01`
+    * - start + 26:
+      - Cr\ :sub:`10`
+      - Cr\ :sub:`11`
+    * - start + 28:
+      - Cr\ :sub:`20`
+      - Cr\ :sub:`21`
+    * - start + 30:
+      - Cr\ :sub:`30`
+      - Cr\ :sub:`31`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 1
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 2
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 3
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv444m.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv444m.rst
new file mode 100644
index 000000000000..7073ac7f842d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv444m.rst
@@ -0,0 +1,148 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-YUV444M:
+.. _v4l2-pix-fmt-yvu444m:
+
+************************************************************
+V4L2_PIX_FMT_YUV444M ('YM24'), V4L2_PIX_FMT_YVU444M ('YM42')
+************************************************************
+
+
+V4L2_PIX_FMT_YVU444M
+Planar formats with full horizontal resolution, also known as YUV and
+YVU 4:4:4
+
+
+Description
+===========
+
+This is a multi-planar format, as opposed to a packed format. The three
+components are separated into three sub-images or planes.
+
+The Y plane is first. The Y plane has one byte per pixel. For
+``V4L2_PIX_FMT_YUV444M`` the Cb data constitutes the second plane which
+is the same width and height as the Y plane (and as the image). The Cr
+data, just like the Cb plane, is in the third plane.
+
+``V4L2_PIX_FMT_YVU444M`` is the same except the Cr data is stored in the
+second plane and the Cb data in the third plane.
+
+If the Y plane has pad bytes after each row, then the Cb and Cr planes
+have the same number of pad bytes after their rows.
+
+``V4L2_PIX_FMT_YUV444M`` and ``V4L2_PIX_FMT_YUV444M`` are intended to be
+used only in drivers and applications that support the multi-planar API,
+described in :ref:`planar-apis`.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start0 + 0:
+      - Y'\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Y'\ :sub:`02`
+      - Y'\ :sub:`03`
+    * - start0 + 4:
+      - Y'\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Y'\ :sub:`12`
+      - Y'\ :sub:`13`
+    * - start0 + 8:
+      - Y'\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Y'\ :sub:`22`
+      - Y'\ :sub:`23`
+    * - start0 + 12:
+      - Y'\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Y'\ :sub:`32`
+      - Y'\ :sub:`33`
+    * -
+    * - start1 + 0:
+      - Cb\ :sub:`00`
+      - Cb\ :sub:`01`
+      - Cb\ :sub:`02`
+      - Cb\ :sub:`03`
+    * - start1 + 4:
+      - Cb\ :sub:`10`
+      - Cb\ :sub:`11`
+      - Cb\ :sub:`12`
+      - Cb\ :sub:`13`
+    * - start1 + 8:
+      - Cb\ :sub:`20`
+      - Cb\ :sub:`21`
+      - Cb\ :sub:`22`
+      - Cb\ :sub:`23`
+    * - start1 + 12:
+      - Cb\ :sub:`20`
+      - Cb\ :sub:`21`
+      - Cb\ :sub:`32`
+      - Cb\ :sub:`33`
+    * -
+    * - start2 + 0:
+      - Cr\ :sub:`00`
+      - Cr\ :sub:`01`
+      - Cr\ :sub:`02`
+      - Cr\ :sub:`03`
+    * - start2 + 4:
+      - Cr\ :sub:`10`
+      - Cr\ :sub:`11`
+      - Cr\ :sub:`12`
+      - Cr\ :sub:`13`
+    * - start2 + 8:
+      - Cr\ :sub:`20`
+      - Cr\ :sub:`21`
+      - Cr\ :sub:`22`
+      - Cr\ :sub:`23`
+    * - start2 + 12:
+      - Cr\ :sub:`30`
+      - Cr\ :sub:`31`
+      - Cr\ :sub:`32`
+      - Cr\ :sub:`33`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      - 1
+      - 2
+      - 3
+    * - 0
+      - YC
+      - YC
+      - YC
+      - YC
+    * - 1
+      - YC
+      - YC
+      - YC
+      - YC
+    * - 2
+      - YC
+      - YC
+      - YC
+      - YC
+    * - 3
+      - YC
+      - YC
+      - YC
+      - YC
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuyv.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuyv.rst
new file mode 100644
index 000000000000..fe70e007787d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuyv.rst
@@ -0,0 +1,125 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-YUYV:
+
+**************************
+V4L2_PIX_FMT_YUYV ('YUYV')
+**************************
+
+
+Packed format with ½ horizontal chroma resolution, also known as YUV
+4:2:2
+
+
+Description
+===========
+
+In this format each four bytes is two pixels. Each four bytes is two
+Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr
+belong to both pixels. As you can see, the Cr and Cb components have
+half the horizontal resolution of the Y component. ``V4L2_PIX_FMT_YUYV``
+is known in the Windows environment as YUY2.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Cb\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Cr\ :sub:`00`
+      - Y'\ :sub:`02`
+      - Cb\ :sub:`01`
+      - Y'\ :sub:`03`
+      - Cr\ :sub:`01`
+    * - start + 8:
+      - Y'\ :sub:`10`
+      - Cb\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Cr\ :sub:`10`
+      - Y'\ :sub:`12`
+      - Cb\ :sub:`11`
+      - Y'\ :sub:`13`
+      - Cr\ :sub:`11`
+    * - start + 16:
+      - Y'\ :sub:`20`
+      - Cb\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Cr\ :sub:`20`
+      - Y'\ :sub:`22`
+      - Cb\ :sub:`21`
+      - Y'\ :sub:`23`
+      - Cr\ :sub:`21`
+    * - start + 24:
+      - Y'\ :sub:`30`
+      - Cb\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Cr\ :sub:`30`
+      - Y'\ :sub:`32`
+      - Cb\ :sub:`31`
+      - Y'\ :sub:`33`
+      - Cr\ :sub:`31`
+
+
+**Color Sample Location:**
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      -
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      - C
+      - Y
+      -
+      - Y
+      - C
+      - Y
+    * - 1
+      - Y
+      - C
+      - Y
+      -
+      - Y
+      - C
+      - Y
+    * - 2
+      - Y
+      - C
+      - Y
+      -
+      - Y
+      - C
+      - Y
+    * - 3
+      - Y
+      - C
+      - Y
+      -
+      - Y
+      - C
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yvyu.rst b/Documentation/userspace-api/media/v4l/pixfmt-yvyu.rst
new file mode 100644
index 000000000000..96c1b537d5a0
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yvyu.rst
@@ -0,0 +1,115 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-YVYU:
+
+**************************
+V4L2_PIX_FMT_YVYU ('YVYU')
+**************************
+
+
+Variation of ``V4L2_PIX_FMT_YUYV`` with different order of samples in
+memory
+
+
+Description
+===========
+
+In this format each four bytes is two pixels. Each four bytes is two
+Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr
+belong to both pixels. As you can see, the Cr and Cb components have
+half the horizontal resolution of the Y component.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00`
+      - Cr\ :sub:`00`
+      - Y'\ :sub:`01`
+      - Cb\ :sub:`00`
+      - Y'\ :sub:`02`
+      - Cr\ :sub:`01`
+      - Y'\ :sub:`03`
+      - Cb\ :sub:`01`
+    * - start + 8:
+      - Y'\ :sub:`10`
+      - Cr\ :sub:`10`
+      - Y'\ :sub:`11`
+      - Cb\ :sub:`10`
+      - Y'\ :sub:`12`
+      - Cr\ :sub:`11`
+      - Y'\ :sub:`13`
+      - Cb\ :sub:`11`
+    * - start + 16:
+      - Y'\ :sub:`20`
+      - Cr\ :sub:`20`
+      - Y'\ :sub:`21`
+      - Cb\ :sub:`20`
+      - Y'\ :sub:`22`
+      - Cr\ :sub:`21`
+      - Y'\ :sub:`23`
+      - Cb\ :sub:`21`
+    * - start + 24:
+      - Y'\ :sub:`30`
+      - Cr\ :sub:`30`
+      - Y'\ :sub:`31`
+      - Cb\ :sub:`30`
+      - Y'\ :sub:`32`
+      - Cr\ :sub:`31`
+      - Y'\ :sub:`33`
+      - Cb\ :sub:`31`
+
+
+**Color Sample Location:**
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * -
+      - 0
+      -
+      - 1
+      - 2
+      -
+      - 3
+    * - 0
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 1
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 2
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
+    * - 3
+      - Y
+      - C
+      - Y
+      - Y
+      - C
+      - Y
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-z16.rst b/Documentation/userspace-api/media/v4l/pixfmt-z16.rst
new file mode 100644
index 000000000000..fe2fb21edeea
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-z16.rst
@@ -0,0 +1,73 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2-PIX-FMT-Z16:
+
+*************************
+V4L2_PIX_FMT_Z16 ('Z16 ')
+*************************
+
+
+16-bit depth data with distance values at each pixel
+
+
+Description
+===========
+
+This is a 16-bit format, representing depth data. Each pixel is a
+distance to the respective point in the image coordinates. Distance unit
+can vary and has to be negotiated with the device separately. Each pixel
+is stored in a 16-bit word in the little endian byte order.
+
+**Byte Order.**
+Each cell is one byte.
+
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Z\ :sub:`00low`
+      - Z\ :sub:`00high`
+      - Z\ :sub:`01low`
+      - Z\ :sub:`01high`
+      - Z\ :sub:`02low`
+      - Z\ :sub:`02high`
+      - Z\ :sub:`03low`
+      - Z\ :sub:`03high`
+    * - start + 8:
+      - Z\ :sub:`10low`
+      - Z\ :sub:`10high`
+      - Z\ :sub:`11low`
+      - Z\ :sub:`11high`
+      - Z\ :sub:`12low`
+      - Z\ :sub:`12high`
+      - Z\ :sub:`13low`
+      - Z\ :sub:`13high`
+    * - start + 16:
+      - Z\ :sub:`20low`
+      - Z\ :sub:`20high`
+      - Z\ :sub:`21low`
+      - Z\ :sub:`21high`
+      - Z\ :sub:`22low`
+      - Z\ :sub:`22high`
+      - Z\ :sub:`23low`
+      - Z\ :sub:`23high`
+    * - start + 24:
+      - Z\ :sub:`30low`
+      - Z\ :sub:`30high`
+      - Z\ :sub:`31low`
+      - Z\ :sub:`31high`
+      - Z\ :sub:`32low`
+      - Z\ :sub:`32high`
+      - Z\ :sub:`33low`
+      - Z\ :sub:`33high`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt.rst b/Documentation/userspace-api/media/v4l/pixfmt.rst
new file mode 100644
index 000000000000..70ca3a5c2cf1
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt.rst
@@ -0,0 +1,45 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _pixfmt:
+
+#############
+Image Formats
+#############
+The V4L2 API was primarily designed for devices exchanging image data
+with applications. The struct :c:type:`v4l2_pix_format` and
+struct :c:type:`v4l2_pix_format_mplane` structures define the
+format and layout of an image in memory. The former is used with the
+single-planar API, while the latter is used with the multi-planar
+version (see :ref:`planar-apis`). Image formats are negotiated with
+the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl. (The explanations here
+focus on video capturing and output, for overlay frame buffer formats
+see also :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`.)
+
+
+.. toctree::
+    :maxdepth: 1
+
+    pixfmt-v4l2
+    pixfmt-v4l2-mplane
+    pixfmt-intro
+    pixfmt-indexed
+    pixfmt-rgb
+    pixfmt-bayer
+    yuv-formats
+    hsv-formats
+    depth-formats
+    pixfmt-compressed
+    sdr-formats
+    tch-formats
+    meta-formats
+    pixfmt-reserved
+    colorspaces
+    colorspaces-defs
+    colorspaces-details
diff --git a/Documentation/userspace-api/media/v4l/planar-apis.rst b/Documentation/userspace-api/media/v4l/planar-apis.rst
new file mode 100644
index 000000000000..6247b0c4ab4d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/planar-apis.rst
@@ -0,0 +1,68 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _planar-apis:
+
+*****************************
+Single- and multi-planar APIs
+*****************************
+
+Some devices require data for each input or output video frame to be
+placed in discontiguous memory buffers. In such cases, one video frame
+has to be addressed using more than one memory address, i.e. one pointer
+per "plane". A plane is a sub-buffer of the current frame. For examples
+of such formats see :ref:`pixfmt`.
+
+Initially, V4L2 API did not support multi-planar buffers and a set of
+extensions has been introduced to handle them. Those extensions
+constitute what is being referred to as the "multi-planar API".
+
+Some of the V4L2 API calls and structures are interpreted differently,
+depending on whether single- or multi-planar API is being used. An
+application can choose whether to use one or the other by passing a
+corresponding buffer type to its ioctl calls. Multi-planar versions of
+buffer types are suffixed with an ``_MPLANE`` string. For a list of
+available multi-planar buffer types see enum
+:c:type:`v4l2_buf_type`.
+
+
+Multi-planar formats
+====================
+
+Multi-planar API introduces new multi-planar formats. Those formats use
+a separate set of FourCC codes. It is important to distinguish between
+the multi-planar API and a multi-planar format. Multi-planar API calls
+can handle all single-planar formats as well (as long as they are passed
+in multi-planar API structures), while the single-planar API cannot
+handle multi-planar formats.
+
+
+Calls that distinguish between single and multi-planar APIs
+===========================================================
+
+:ref:`VIDIOC_QUERYCAP <VIDIOC_QUERYCAP>`
+    Two additional multi-planar capabilities are added. They can be set
+    together with non-multi-planar ones for devices that handle both
+    single- and multi-planar formats.
+
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`, :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`, :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>`
+    New structures for describing multi-planar formats are added: struct
+    :c:type:`v4l2_pix_format_mplane` and
+    struct :c:type:`v4l2_plane_pix_format`.
+    Drivers may define new multi-planar formats, which have distinct
+    FourCC codes from the existing single-planar ones.
+
+:ref:`VIDIOC_QBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_QUERYBUF <VIDIOC_QUERYBUF>`
+    A new struct :c:type:`v4l2_plane` structure for
+    describing planes is added. Arrays of this structure are passed in
+    the new ``m.planes`` field of struct
+    :c:type:`v4l2_buffer`.
+
+:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`
+    Will allocate multi-planar buffers as requested.
diff --git a/Documentation/userspace-api/media/v4l/querycap.rst b/Documentation/userspace-api/media/v4l/querycap.rst
new file mode 100644
index 000000000000..35fba2a9e09b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/querycap.rst
@@ -0,0 +1,41 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _querycap:
+
+*********************
+Querying Capabilities
+*********************
+
+Because V4L2 covers a wide variety of devices not all aspects of the API
+are equally applicable to all types of devices. Furthermore devices of
+the same type have different capabilities and this specification permits
+the omission of a few complicated and less important parts of the API.
+
+The :ref:`VIDIOC_QUERYCAP` ioctl is available to
+check if the kernel device is compatible with this specification, and to
+query the :ref:`functions <devices>` and :ref:`I/O methods <io>`
+supported by the device.
+
+Starting with kernel version 3.1, :ref:`VIDIOC_QUERYCAP`
+will return the V4L2 API version used by the driver, with generally
+matches the Kernel version. There's no need of using
+:ref:`VIDIOC_QUERYCAP` to check if a specific ioctl
+is supported, the V4L2 core now returns ``ENOTTY`` if a driver doesn't
+provide support for an ioctl.
+
+Other features can be queried by calling the respective ioctl, for
+example :ref:`VIDIOC_ENUMINPUT` to learn about the
+number, types and names of video connectors on the device. Although
+abstraction is a major objective of this API, the
+:ref:`VIDIOC_QUERYCAP` ioctl also allows driver
+specific applications to reliably identify the driver.
+
+All V4L2 drivers must support :ref:`VIDIOC_QUERYCAP`.
+Applications should always call this ioctl after opening the device.
diff --git a/Documentation/userspace-api/media/v4l/rw.rst b/Documentation/userspace-api/media/v4l/rw.rst
new file mode 100644
index 000000000000..ce2768c994d0
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/rw.rst
@@ -0,0 +1,54 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _rw:
+
+**********
+Read/Write
+**********
+
+Input and output devices support the :ref:`read() <func-read>` and
+:ref:`write() <func-write>` function, respectively, when the
+``V4L2_CAP_READWRITE`` flag in the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl is set.
+
+Drivers may need the CPU to copy the data, but they may also support DMA
+to or from user memory, so this I/O method is not necessarily less
+efficient than other methods merely exchanging buffer pointers. It is
+considered inferior though because no meta-information like frame
+counters or timestamps are passed. This information is necessary to
+recognize frame dropping and to synchronize with other data streams.
+However this is also the simplest I/O method, requiring little or no
+setup to exchange data. It permits command line stunts like this (the
+vidctrl tool is fictitious):
+
+
+.. code-block:: none
+
+    $ vidctrl /dev/video --input=0 --format=YUYV --size=352x288
+    $ dd if=/dev/video of=myimage.422 bs=202752 count=1
+
+To read from the device applications use the :ref:`read() <func-read>`
+function, to write the :ref:`write() <func-write>` function. Drivers
+must implement one I/O method if they exchange data with applications,
+but it need not be this. [#f1]_ When reading or writing is supported, the
+driver must also support the :ref:`select() <func-select>` and
+:ref:`poll() <func-poll>` function. [#f2]_
+
+.. [#f1]
+   It would be desirable if applications could depend on drivers
+   supporting all I/O interfaces, but as much as the complex memory
+   mapping I/O can be inadequate for some devices we have no reason to
+   require this interface, which is most useful for simple applications
+   capturing still images.
+
+.. [#f2]
+   At the driver level :ref:`select() <func-select>` and :ref:`poll() <func-poll>` are
+   the same, and :ref:`select() <func-select>` is too important to be optional.
diff --git a/Documentation/userspace-api/media/v4l/sdr-formats.rst b/Documentation/userspace-api/media/v4l/sdr-formats.rst
new file mode 100644
index 000000000000..b7a1be75251f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/sdr-formats.rst
@@ -0,0 +1,29 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _sdr-formats:
+
+***********
+SDR Formats
+***********
+
+These formats are used for :ref:`SDR <sdr>` interface only.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    pixfmt-sdr-cu08
+    pixfmt-sdr-cu16le
+    pixfmt-sdr-cs08
+    pixfmt-sdr-cs14le
+    pixfmt-sdr-ru12le
+    pixfmt-sdr-pcu16be
+    pixfmt-sdr-pcu18be
+    pixfmt-sdr-pcu20be
diff --git a/Documentation/userspace-api/media/v4l/selection-api-configuration.rst b/Documentation/userspace-api/media/v4l/selection-api-configuration.rst
new file mode 100644
index 000000000000..67ff67fd734e
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/selection-api-configuration.rst
@@ -0,0 +1,144 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+*************
+Configuration
+*************
+
+Applications can use the :ref:`selection API <VIDIOC_G_SELECTION>` to
+select an area in a video signal or a buffer, and to query for default
+settings and hardware limits.
+
+Video hardware can have various cropping, composing and scaling
+limitations. It may only scale up or down, support only discrete scaling
+factors, or have different scaling abilities in the horizontal and
+vertical directions. Also it may not support scaling at all. At the same
+time the cropping/composing rectangles may have to be aligned, and both
+the source and the sink may have arbitrary upper and lower size limits.
+Therefore, as usual, drivers are expected to adjust the requested
+parameters and return the actual values selected. An application can
+control the rounding behaviour using
+:ref:`constraint flags <v4l2-selection-flags>`.
+
+
+Configuration of video capture
+==============================
+
+See figure :ref:`sel-targets-capture` for examples of the selection
+targets available for a video capture device. It is recommended to
+configure the cropping targets before to the composing targets.
+
+The range of coordinates of the top left corner, width and height of
+areas that can be sampled is given by the ``V4L2_SEL_TGT_CROP_BOUNDS``
+target. It is recommended for the driver developers to put the top/left
+corner at position ``(0,0)``. The rectangle's coordinates are expressed
+in pixels.
+
+The top left corner, width and height of the source rectangle, that is
+the area actually sampled, is given by the ``V4L2_SEL_TGT_CROP`` target.
+It uses the same coordinate system as ``V4L2_SEL_TGT_CROP_BOUNDS``. The
+active cropping area must lie completely inside the capture boundaries.
+The driver may further adjust the requested size and/or position
+according to hardware limitations.
+
+Each capture device has a default source rectangle, given by the
+``V4L2_SEL_TGT_CROP_DEFAULT`` target. This rectangle shall cover what the
+driver writer considers the complete picture. Drivers shall set the
+active crop rectangle to the default when the driver is first loaded,
+but not later.
+
+The composing targets refer to a memory buffer. The limits of composing
+coordinates are obtained using ``V4L2_SEL_TGT_COMPOSE_BOUNDS``. All
+coordinates are expressed in pixels. The rectangle's top/left corner
+must be located at position ``(0,0)``. The width and height are equal to
+the image size set by :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`.
+
+The part of a buffer into which the image is inserted by the hardware is
+controlled by the ``V4L2_SEL_TGT_COMPOSE`` target. The rectangle's
+coordinates are also expressed in the same coordinate system as the
+bounds rectangle. The composing rectangle must lie completely inside
+bounds rectangle. The driver must adjust the composing rectangle to fit
+to the bounding limits. Moreover, the driver can perform other
+adjustments according to hardware limitations. The application can
+control rounding behaviour using
+:ref:`constraint flags <v4l2-selection-flags>`.
+
+For capture devices the default composing rectangle is queried using
+``V4L2_SEL_TGT_COMPOSE_DEFAULT``. It is usually equal to the bounding
+rectangle.
+
+The part of a buffer that is modified by the hardware is given by
+``V4L2_SEL_TGT_COMPOSE_PADDED``. It contains all pixels defined using
+``V4L2_SEL_TGT_COMPOSE`` plus all padding data modified by hardware
+during insertion process. All pixels outside this rectangle *must not*
+be changed by the hardware. The content of pixels that lie inside the
+padded area but outside active area is undefined. The application can
+use the padded and active rectangles to detect where the rubbish pixels
+are located and remove them if needed.
+
+
+Configuration of video output
+=============================
+
+For output devices targets and ioctls are used similarly to the video
+capture case. The *composing* rectangle refers to the insertion of an
+image into a video signal. The cropping rectangles refer to a memory
+buffer. It is recommended to configure the composing targets before to
+the cropping targets.
+
+The cropping targets refer to the memory buffer that contains an image
+to be inserted into a video signal or graphical screen. The limits of
+cropping coordinates are obtained using ``V4L2_SEL_TGT_CROP_BOUNDS``.
+All coordinates are expressed in pixels. The top/left corner is always
+point ``(0,0)``. The width and height is equal to the image size
+specified using :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl.
+
+The top left corner, width and height of the source rectangle, that is
+the area from which image date are processed by the hardware, is given
+by the ``V4L2_SEL_TGT_CROP``. Its coordinates are expressed in in the
+same coordinate system as the bounds rectangle. The active cropping area
+must lie completely inside the crop boundaries and the driver may
+further adjust the requested size and/or position according to hardware
+limitations.
+
+For output devices the default cropping rectangle is queried using
+``V4L2_SEL_TGT_CROP_DEFAULT``. It is usually equal to the bounding
+rectangle.
+
+The part of a video signal or graphics display where the image is
+inserted by the hardware is controlled by ``V4L2_SEL_TGT_COMPOSE``
+target. The rectangle's coordinates are expressed in pixels. The
+composing rectangle must lie completely inside the bounds rectangle. The
+driver must adjust the area to fit to the bounding limits. Moreover, the
+driver can perform other adjustments according to hardware limitations.
+
+The device has a default composing rectangle, given by the
+``V4L2_SEL_TGT_COMPOSE_DEFAULT`` target. This rectangle shall cover what
+the driver writer considers the complete picture. It is recommended for
+the driver developers to put the top/left corner at position ``(0,0)``.
+Drivers shall set the active composing rectangle to the default one when
+the driver is first loaded.
+
+The devices may introduce additional content to video signal other than
+an image from memory buffers. It includes borders around an image.
+However, such a padded area is driver-dependent feature not covered by
+this document. Driver developers are encouraged to keep padded rectangle
+equal to active one. The padded target is accessed by the
+``V4L2_SEL_TGT_COMPOSE_PADDED`` identifier. It must contain all pixels
+from the ``V4L2_SEL_TGT_COMPOSE`` target.
+
+
+Scaling control
+===============
+
+An application can detect if scaling is performed by comparing the width
+and the height of rectangles obtained using ``V4L2_SEL_TGT_CROP`` and
+``V4L2_SEL_TGT_COMPOSE`` targets. If these are not equal then the
+scaling is applied. The application can compute the scaling ratios using
+these values.
diff --git a/Documentation/userspace-api/media/v4l/selection-api-examples.rst b/Documentation/userspace-api/media/v4l/selection-api-examples.rst
new file mode 100644
index 000000000000..2f4027211129
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/selection-api-examples.rst
@@ -0,0 +1,91 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+********
+Examples
+********
+
+(A video capture device is assumed; change
+``V4L2_BUF_TYPE_VIDEO_CAPTURE`` for other devices; change target to
+``V4L2_SEL_TGT_COMPOSE_*`` family to configure composing area)
+
+Example: Resetting the cropping parameters
+==========================================
+
+.. code-block:: c
+
+	struct v4l2_selection sel = {
+	    .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+	    .target = V4L2_SEL_TGT_CROP_DEFAULT,
+	};
+	ret = ioctl(fd, VIDIOC_G_SELECTION, &sel);
+	if (ret)
+	    exit(-1);
+	sel.target = V4L2_SEL_TGT_CROP;
+	ret = ioctl(fd, VIDIOC_S_SELECTION, &sel);
+	if (ret)
+	    exit(-1);
+
+Setting a composing area on output of size of *at most* half of limit
+placed at a center of a display.
+
+Example: Simple downscaling
+===========================
+
+.. code-block:: c
+
+	struct v4l2_selection sel = {
+	    .type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
+	    .target = V4L2_SEL_TGT_COMPOSE_BOUNDS,
+	};
+	struct v4l2_rect r;
+
+	ret = ioctl(fd, VIDIOC_G_SELECTION, &sel);
+	if (ret)
+	    exit(-1);
+	/* setting smaller compose rectangle */
+	r.width = sel.r.width / 2;
+	r.height = sel.r.height / 2;
+	r.left = sel.r.width / 4;
+	r.top = sel.r.height / 4;
+	sel.r = r;
+	sel.target = V4L2_SEL_TGT_COMPOSE;
+	sel.flags = V4L2_SEL_FLAG_LE;
+	ret = ioctl(fd, VIDIOC_S_SELECTION, &sel);
+	if (ret)
+	    exit(-1);
+
+A video output device is assumed; change ``V4L2_BUF_TYPE_VIDEO_OUTPUT``
+for other devices
+
+Example: Querying for scaling factors
+=====================================
+
+.. code-block:: c
+
+	struct v4l2_selection compose = {
+	    .type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
+	    .target = V4L2_SEL_TGT_COMPOSE,
+	};
+	struct v4l2_selection crop = {
+	    .type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
+	    .target = V4L2_SEL_TGT_CROP,
+	};
+	double hscale, vscale;
+
+	ret = ioctl(fd, VIDIOC_G_SELECTION, &compose);
+	if (ret)
+	    exit(-1);
+	ret = ioctl(fd, VIDIOC_G_SELECTION, &crop);
+	if (ret)
+	    exit(-1);
+
+	/* computing scaling factors */
+	hscale = (double)compose.r.width / crop.r.width;
+	vscale = (double)compose.r.height / crop.r.height;
diff --git a/Documentation/userspace-api/media/v4l/selection-api-intro.rst b/Documentation/userspace-api/media/v4l/selection-api-intro.rst
new file mode 100644
index 000000000000..0994ca25be5e
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/selection-api-intro.rst
@@ -0,0 +1,35 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+************
+Introduction
+************
+
+Some video capture devices can sample a subsection of a picture and
+shrink or enlarge it to an image of arbitrary size. Next, the devices
+can insert the image into larger one. Some video output devices can crop
+part of an input image, scale it up or down and insert it at an
+arbitrary scan line and horizontal offset into a video signal. We call
+these abilities cropping, scaling and composing.
+
+On a video *capture* device the source is a video signal, and the
+cropping target determine the area actually sampled. The sink is an
+image stored in a memory buffer. The composing area specifies which part
+of the buffer is actually written to by the hardware.
+
+On a video *output* device the source is an image in a memory buffer,
+and the cropping target is a part of an image to be shown on a display.
+The sink is the display or the graphics screen. The application may
+select the part of display where the image should be displayed. The size
+and position of such a window is controlled by the compose target.
+
+Rectangles for all cropping and composing targets are defined even if
+the device does supports neither cropping nor composing. Their size and
+position will be fixed in such a case. If the device does not support
+scaling then the cropping and composing rectangles have the same size.
diff --git a/Documentation/userspace-api/media/v4l/selection-api-targets.rst b/Documentation/userspace-api/media/v4l/selection-api-targets.rst
new file mode 100644
index 000000000000..56eab969c9d8
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/selection-api-targets.rst
@@ -0,0 +1,27 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+*****************
+Selection targets
+*****************
+
+
+.. _sel-targets-capture:
+
+.. kernel-figure:: selection.svg
+    :alt:   selection.svg
+    :align: center
+
+    Cropping and composing targets
+
+    Targets used by a cropping, composing and scaling process
+
+
+
+See :ref:`v4l2-selection-targets` for more information.
diff --git a/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst b/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst
new file mode 100644
index 000000000000..a9360a000022
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst
@@ -0,0 +1,46 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _selection-vs-crop:
+
+********************************
+Comparison with old cropping API
+********************************
+
+The selection API was introduced to cope with deficiencies of the
+older :ref:`CROP API <crop>`, that was designed to control simple
+capture devices. Later the cropping API was adopted by video output
+drivers. The ioctls are used to select a part of the display were the
+video signal is inserted. It should be considered as an API abuse
+because the described operation is actually the composing. The
+selection API makes a clear distinction between composing and cropping
+operations by setting the appropriate targets.
+
+The CROP API lacks any support for composing to and cropping from an
+image inside a memory buffer. The application could configure a
+capture device to fill only a part of an image by abusing V4L2
+API. Cropping a smaller image from a larger one is achieved by setting
+the field ``bytesperline`` at struct :c:type:`v4l2_pix_format`.
+Introducing an image offsets could be done by modifying field
+``m_userptr`` at struct :c:type:`v4l2_buffer` before calling
+:ref:`VIDIOC_QBUF <VIDIOC_QBUF>`. Those operations should be avoided
+because they are not portable (endianness), and do not work for
+macroblock and Bayer formats and mmap buffers.
+
+The selection API deals with configuration of buffer
+cropping/composing in a clear, intuitive and portable way. Next, with
+the selection API the concepts of the padded target and constraints
+flags are introduced. Finally, struct :c:type:`v4l2_crop` and struct
+:c:type:`v4l2_cropcap` have no reserved fields. Therefore there is no
+way to extend their functionality. The new struct
+:c:type:`v4l2_selection` provides a lot of place for future
+extensions.
+
+Driver developers are encouraged to implement only selection API. The
+former cropping API would be simulated using the new one.
diff --git a/Documentation/userspace-api/media/v4l/selection-api.rst b/Documentation/userspace-api/media/v4l/selection-api.rst
new file mode 100644
index 000000000000..b86e387721df
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/selection-api.rst
@@ -0,0 +1,23 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _selection-api:
+
+Cropping, composing and scaling -- the SELECTION API
+====================================================
+
+
+.. toctree::
+    :maxdepth: 1
+
+    selection-api-intro.rst
+    selection-api-targets.rst
+    selection-api-configuration.rst
+    selection-api-vs-crop-api.rst
+    selection-api-examples.rst
diff --git a/Documentation/userspace-api/media/v4l/selection.svg b/Documentation/userspace-api/media/v4l/selection.svg
new file mode 100644
index 000000000000..c0e00ab2ae6b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/selection.svg
@@ -0,0 +1,1178 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+    This file is dual-licensed: you can use it either under the terms
+    of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+    dual licensing only applies to this file, and not this project as a
+    whole.
+
+    a) This file is free software; you can redistribute it and/or
+       modify it under the terms of the GNU General Public License as
+       published by the Free Software Foundation version 2 of
+       the License.
+
+       This file is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+       GNU General Public License for more details.
+
+    Or, alternatively,
+
+    b) Permission is granted to copy, distribute and/or modify this
+       document under the terms of the GNU Free Documentation License,
+       Version 1.1 or any later version published by the Free Software
+       Foundation, with no Invariant Sections, no Front-Cover Texts
+       and no Back-Cover Texts. A copy of the license is included at
+       Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg enable-background="new" version="1" viewBox="0 0 4226.3 1686.8" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+ <defs>
+  <pattern id="ig" xlink:href="#ka" patternTransform="matrix(5.4432 0 0 10.1 1722.4 161.06)"/>
+  <marker id="er" overflow="visible" orient="auto">
+   <path d="m-1.2 0l-1 1 3.5-1-3.5-1 1 1z" fill="#f8d615" fill-rule="evenodd" stroke="#f8d615" stroke-width=".2pt"/>
+  </marker>
+  <pattern id="ka" width="2" height="1" patternTransform="scale(10)" patternUnits="userSpaceOnUse">
+   <path d="M0-.5h1v2H0z" fill="#f815bb"/>
+  </pattern>
+  <filter id="ep" x="-.085" y="-.366" width="1.169" height="1.732">
+   <feGaussianBlur stdDeviation="4.574"/>
+  </filter>
+  <linearGradient id="n">
+   <stop stop-color="#fff" offset="0"/>
+   <stop stop-color="#fff" stop-opacity="0" offset="1"/>
+  </linearGradient>
+  <linearGradient id="j">
+   <stop stop-color="#f9eed3" offset="0"/>
+   <stop stop-opacity="0" offset="1"/>
+  </linearGradient>
+  <linearGradient id="s">
+   <stop stop-color="#283131" stop-opacity="0" offset="0"/>
+   <stop stop-color="#1e2424" offset=".5"/>
+   <stop offset="1"/>
+  </linearGradient>
+  <linearGradient id="u">
+   <stop stop-color="#cfc690" offset="0"/>
+   <stop stop-color="#afa775" offset=".212"/>
+   <stop stop-color="#615c3a" offset=".534"/>
+   <stop offset=".765"/>
+   <stop stop-color="#403518" offset="1"/>
+  </linearGradient>
+  <radialGradient id="jd" cx="418.3" cy="342.48" r="131.45" gradientTransform="matrix(1.3957 .62111 -.42441 .95372 -15.062 -227.97)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#283131" offset="0"/>
+   <stop stop-color="#1e2424" offset=".5"/>
+   <stop offset="1"/>
+  </radialGradient>
+  <filter id="iz" x="-.3" y="-.3" width="1.6" height="1.6">
+   <feGaussianBlur stdDeviation="2"/>
+  </filter>
+  <clipPath id="ea">
+   <path d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 12.61-67.045 3.214-93.929-9.434-26.993-34.967-59.124-66.429-69.643-31.033-10.375-65.018-4.848-84.286 5.714z" fill="#f5ff04" fill-rule="evenodd"/>
+  </clipPath>
+  <radialGradient id="iy" cx="275.44" cy="335.35" r="36.75" gradientTransform="matrix(.05911 2.687 -.72343 .01591 408.73 -424.56)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#fff" offset="0"/>
+   <stop stop-color="#fff" stop-opacity="0" offset="1"/>
+  </radialGradient>
+  <clipPath id="kb">
+   <path d="m265.94 126.68l-18.767 168.86 174.11-73.121 61.954 88.659 57.884-31.99-37.534-180.06-237.64 27.649z" fill-rule="evenodd" stroke="#000" stroke-width=".9"/>
+  </clipPath>
+  <clipPath id="jz">
+   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <clipPath id="kd">
+   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <clipPath id="jx">
+   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <clipPath id="en">
+   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <clipPath id="jw">
+   <path d="M821.64 477.89s22.619-6.507 35.743-5.873c13.123.634 30.642 1.939 43.709 12.186 13.067 10.248 25.068 27.14 34.112 58.37s1.698 99.252-6.176 143.35-28.265 106.11-45 140-49.798 77.495-60.569 89.876c-11.364 13.062-56.206 36.426-79.431 42.267 5.303-10.607 48.9-50.589 35-60.714-14.019-10.212-45.76 45.982-84.293 29.033 21.382-13.132 41.779-51.186 34.041-66.594-7.84-15.61-30.705 48.758-93.536 37.013 30.052-27.527 55.407-70.904 41.263-82.98-14.415-12.307-60.462 54.293-60.462 54.293s-2.822-41.7 13.773-68.607c16.639-26.978 79.653-81.615 99.553-111.7 19.9-30.088 33.613-66.009 42.135-92.518s15.801-77.1 15.801-77.1" enable-background="new" fill="#202020" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <clipPath id="kp">
+   <path d="m366.89 504.13s-29.554 40.573-47.857 74.286-58.621 126.36-70.357 171.07c-11.759 44.803-62.5 123.57-62.5 123.57l76.071 18.214s11.807-12.823 31.071-46.071 60.357-138.57 60.357-138.57l13.214-202.5z" enable-background="accumulate" fill="#0f0f0f" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <clipPath id="eo">
+   <path d="M569.03 1018.8c-4.286.714-27.628 3.618-57.857 10s-99.775 25.962-142.86 35.714-117.26 34.816-156.91 27.265c-39.648-7.55-89.516-64.408-89.516-64.408l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" fill="#0b0b0b" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <filter id="kc" x="-.353" y="-.182" width="1.706" height="1.363">
+   <feGaussianBlur stdDeviation="48.038"/>
+  </filter>
+  <filter id="jb" x="-.611" y="-.149" width="2.223" height="1.299">
+   <feGaussianBlur stdDeviation="37.83"/>
+  </filter>
+  <filter id="eg" x="-.235" y="-.245" width="1.47" height="1.49">
+   <feGaussianBlur stdDeviation="58.328"/>
+  </filter>
+  <filter id="jy" x="-.205" y="-.29" width="1.409" height="1.58">
+   <feGaussianBlur stdDeviation="22.3"/>
+  </filter>
+  <filter id="jv" x="-.344" y="-.184" width="1.688" height="1.369">
+   <feGaussianBlur stdDeviation="34.542"/>
+  </filter>
+  <filter id="kf" x="-.274" y="-.213" width="1.549" height="1.427">
+   <feGaussianBlur stdDeviation="11.314"/>
+  </filter>
+  <filter id="ja" x="-.259" y="-.224" width="1.518" height="1.447">
+   <feGaussianBlur stdDeviation="19.632"/>
+  </filter>
+  <filter id="kq" x="-.325" y="-.19" width="1.651" height="1.38">
+   <feGaussianBlur stdDeviation="28.713"/>
+  </filter>
+  <filter id="ko" x="-.381" y="-.175" width="1.762" height="1.35">
+   <feGaussianBlur stdDeviation="19.304"/>
+  </filter>
+  <filter id="kv" x="-.211" y="-.168" width="1.422" height="1.336">
+   <feGaussianBlur stdDeviation="8.369"/>
+  </filter>
+  <filter id="ks" x="-.187" y="-.236" width="1.374" height="1.473">
+   <feGaussianBlur stdDeviation="31.212"/>
+  </filter>
+  <clipPath id="ju">
+   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <filter id="ki" x="-.252" y="-.053" width="1.503" height="1.106">
+   <feGaussianBlur stdDeviation="13.025"/>
+  </filter>
+  <linearGradient id="t" x1="603.84" x2="616.24" y1="627.85" y2="585.43" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#1a1a1a" offset="0"/>
+   <stop stop-color="#1a1a1a" stop-opacity="0" offset="1"/>
+  </linearGradient>
+  <filter id="dq" x="-.329" y="-.182" width="1.657" height="1.364">
+   <feGaussianBlur stdDeviation="20.913"/>
+  </filter>
+  <filter id="dr" x="-.555" y="-.514" width="2.109" height="2.029">
+   <feGaussianBlur stdDeviation="20.913"/>
+  </filter>
+  <filter id="cy" x="-.326" y="-.845" width="1.653" height="2.691">
+   <feGaussianBlur stdDeviation="21.92"/>
+  </filter>
+  <filter id="he" x="-.409" y="-.715" width="1.818" height="2.431">
+   <feGaussianBlur stdDeviation="21.92"/>
+  </filter>
+  <filter id="o">
+   <feGaussianBlur stdDeviation="8.881"/>
+  </filter>
+  <clipPath id="jt">
+   <path d="M647.61 540.05s22.619-6.507 35.743-5.873c13.123.634 30.642 1.939 43.709 12.186 13.067 10.248 25.068 27.14 34.112 58.37s1.698 99.252-6.176 143.35-28.265 106.11-45 140-49.798 77.495-60.569 89.876c-11.364 13.062-56.206 36.426-79.431 42.267 5.303-10.607 48.9-50.589 35-60.714-14.019-10.212-45.76 45.982-84.293 29.033 21.382-13.132 41.779-51.186 34.041-66.594-7.84-15.61-30.705 48.758-93.536 37.013 30.052-27.527 55.407-70.904 41.263-82.98-14.415-12.307-60.462 54.293-60.462 54.293s-2.822-41.7 13.773-68.607c16.639-26.978 79.653-81.615 99.553-111.7 19.9-30.088 33.613-66.009 42.135-92.518s15.801-77.1 15.801-77.1" enable-background="new" fill="#202020" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="je" x="-.277" y="-.325" width="1.554" height="1.65">
+   <feGaussianBlur stdDeviation="19.956"/>
+  </filter>
+  <clipPath id="e">
+   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <clipPath id="kr">
+   <path d="m366.89 504.13s-29.554 40.573-47.857 74.286-58.621 126.36-70.357 171.07c-11.759 44.803-62.5 123.57-62.5 123.57l76.071 18.214s11.807-12.823 31.071-46.071 60.357-138.57 60.357-138.57l13.214-202.5z" enable-background="accumulate" fill="#0f0f0f" fill-rule="evenodd"/>
+  </clipPath>
+  <clipPath id="am">
+   <path d="M586.13 997.99c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="ds">
+   <feGaussianBlur stdDeviation="10.893"/>
+  </filter>
+  <filter id="bz" x="-.495" y="-.267" width="1.99" height="1.534">
+   <feGaussianBlur stdDeviation="10.731"/>
+  </filter>
+  <filter id="by" x="-.406" y="-.303" width="1.812" height="1.605">
+   <feGaussianBlur stdDeviation="9.859"/>
+  </filter>
+  <clipPath id="cj">
+   <path d="M586.13 997.99c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="il">
+   <feGaussianBlur stdDeviation="3.616"/>
+  </filter>
+  <filter id="ir">
+   <feGaussianBlur stdDeviation="3.864"/>
+  </filter>
+  <clipPath id="ku">
+   <path d="M569.03 1018.8c-4.286.714-27.628 3.618-57.857 10s-57.314 4.966-135.79 17.33c-79.852 12.581-94.064 42.542-108.12 47.064-14.7 4.729-145.38-65.822-145.38-65.822l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" fill="#292929" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <linearGradient id="dt" x1="699.33" x2="698.98" y1="269.77" y2="346.14" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#fff" offset="0"/>
+   <stop offset="1"/>
+  </linearGradient>
+  <mask id="jc" maskUnits="userSpaceOnUse">
+   <ellipse transform="translate(-174.03 62.156)" cx="579.47" cy="260.58" rx="192.69" ry="164.05" enable-background="accumulate" fill="url(#dt)"/>
+  </mask>
+  <clipPath id="is">
+   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303s16.406 45.907 20.334 63.184c3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.977-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.416-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <clipPath id="im">
+   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <filter id="jq" x="-.088" y="-.177" width="1.176" height="1.355">
+   <feGaussianBlur stdDeviation="16.34"/>
+  </filter>
+  <filter id="i">
+   <feTurbulence baseFrequency=".24" numOctaves="10" result="result0" seed="655" type="fractalNoise"/>
+   <feDisplacementMap in="SourceGraphic" in2="result0" scale="62" xChannelSelector="B" yChannelSelector="G"/>
+  </filter>
+  <filter id="em">
+   <feGaussianBlur stdDeviation="2.04"/>
+  </filter>
+  <clipPath id="jo">
+   <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
+  </clipPath>
+  <clipPath id="jp">
+   <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
+  </clipPath>
+  <clipPath id="js">
+   <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
+  </clipPath>
+  <clipPath id="ke">
+   <path d="M178.21 274.15c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="iv" x="-.243" y="-.391" width="1.487" height="1.782">
+   <feGaussianBlur stdDeviation="14.59"/>
+  </filter>
+  <filter id="iu" x="-.146" y="-.235" width="1.292" height="1.47">
+   <feGaussianBlur stdDeviation="4.444"/>
+  </filter>
+  <filter id="it">
+   <feGaussianBlur stdDeviation=".606"/>
+  </filter>
+  <filter id="ix">
+   <feGaussianBlur stdDeviation="6.589"/>
+  </filter>
+  <filter id="iw">
+   <feGaussianBlur stdDeviation="1.505"/>
+  </filter>
+  <filter id="jj" x="-.103" y="-.342" width="1.206" height="1.685">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="jf" x="-.098" y="-.198" width="1.197" height="1.395">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="jh" x="-.098" y="-.198" width="1.196" height="1.397">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="ji" x="-.099" y="-.226" width="1.198" height="1.453">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="hy" x="-.099" y="-.225" width="1.198" height="1.451">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="hu" x="-.105" y="-.405" width="1.209" height="1.809">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="hv" x="-.103" y="-.364" width="1.207" height="1.729">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="hw" x="-.102" y="-.324" width="1.204" height="1.647">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="hx" x="-.101" y="-.274" width="1.201" height="1.548">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="hz" x="-.098" y="-.209" width="1.197" height="1.417">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="ia" x="-.098" y="-.203" width="1.197" height="1.406">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="ib" x="-.098" y="-.198" width="1.196" height="1.397">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="jg">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="jk">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="hr" x="-.031" y="-.103" width="1.062" height="1.205">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hq">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hp">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hn">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hm">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hl">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hk">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hj">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hi">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hh">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hf" x="-.031" y="-.121" width="1.063" height="1.243">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hg" x="-.031" y="-.109" width="1.062" height="1.219">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="hs">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="ho">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="ht">
+   <feGaussianBlur stdDeviation="1.723"/>
+  </filter>
+  <clipPath id="jl">
+   <path transform="translate(.08 -.031)" d="M1111.4-285.94l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.313-.486.21-1.737.584-4.093 1.469-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.594c-1.895.42-1.675.642-2.875.875-1.296.251-1.721-.01-5.437.78-3.49.743-8.895 1.932-10.156 2.688-1.584-.18-3.868-.321-5.844-.03-3.04.446-4.916.672-6.844.905-.655.08-1.04.201-1.344.282-.426.131-.685.26-1.375.343-1.311.16-1.762-.156-5.53.282-3.555.413-9.006 1.272-10.25 1.937-1.6-.297-3.859-.534-5.845-.344-3.058.294-4.972.484-6.906.657-1.934.172-1.688.422-2.906.53-1.316.119-1.76-.163-5.531.25-3.542.39-9.008 1.21-10.281 1.876-1.6-.295-3.887-.507-5.875-.313-3.059.3-4.941.48-6.875.657-.658.06-1.04.178-1.344.25-.428.119-.683.218-1.375.28-1.316.121-1.76-.194-5.531.22-3.556.39-9.006 1.239-10.25
+1.906-1.599-.294-3.86-.524-5.844-.313-3.056.326-4.974.527-6.906.719s-1.69.44-2.906.563c-1.315.131-1.763-.165-5.532.28-3.539.42-8.977 1.293-10.25 1.97-1.597-.281-3.86-.42-5.843-.188-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.128-.685.268-1.375.344-1.314.146-1.768-.174-5.531.313-3.55.458-8.979 1.419-10.22 2.125-1.593-.245-3.833-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.924.258-1.726.493-2.937.656-1.31.176-1.748-.104-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.254-5.813.094-3.026.536-4.899.862-6.812 1.188-.651.11-1.014.27-1.313.375-.42.164-.663.33-1.344.468-1.294.262-1.727-.006-5.437.813-3.499.772-8.846 2.383-10.062 3.219-1.563-.078-3.758.085-5.688.593-2.972.783-4.817 1.232-6.687 1.75s-1.667.768-2.844 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.93.928-4.75 1.459-6.594
+2.063-.626.205-.991.393-1.28.531-.408.214-.654.409-1.313.625-1.255.412-1.687.19-5.282 1.438-3.39 1.177-8.595 3.213-9.78 4.156-1.525.06-3.65.395-5.532 1.062-2.897 1.029-4.699 1.676-6.531 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.47-1.507.107-3.635.498-5.5 1.218a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.594v.03l-8 3.188 1.812 14.72c-.258-.062 6.188 3.312 6.188 3.312.226-.145.449-.273.718-.375 1.08-.41 2.172-.216 6-1.688 3.829-1.471 5.224-2.005 5.907-2.406.68-.4 1.611-.88 2.218-1.531 1.827-.138 3.571-.493 4.938-1 2.968-1.1 4.875-1.806 6.781-2.469 1.906-.662 2.354-1.415 3.406-1.781 1.092-.38 2.195-.166 6.063-1.531 3.867-1.366 5.283-1.827 5.969-2.22.7-.4 1.7-.932 2.312-1.593 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.927-1.622 6.844-2.25 1.539-.504 2.174-1.047 2.906-1.437.23-.135.476-.254.75-.344 1.099-.36 2.182-.082
+6.094-1.313 3.912-1.23 5.366-1.673 6.063-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.635-.267 5.03-.688 3.031-.913 4.993-1.43 6.938-1.968 1.945-.539 2.427-1.265 3.5-1.563 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.735-.33 1.814-.754 2.437-1.375 1.998.116 3.858-.02 5.344-.375 3.078-.735 5.084-1.101 7.063-1.5 1.588-.32 2.244-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.133-.23 2.304.209 6.343-.5 4.04-.709 5.5-.927 6.22-1.187.715-.26 1.704-.568 2.343-1.094 1.924.24 3.748.224 5.188 0 3.126-.488 5.154-.7 7.156-.969 2.001-.268 2.489-.945 3.594-1.094 1.146-.154 2.275.302 6.343-.219 4.068-.52 5.56-.695 6.282-.937.737-.247 1.798-.586 2.437-1.125 2.05.336 3.974.398 5.5.219 3.142-.37 5.18-.56 7.188-.782 1.61-.178 2.264-.608 3.03-.843.242-.086.495-.156.782-.188 1.15-.127 2.301.347 6.375-.125s5.559-.61 6.281-.844c.72-.232 1.7-.473 2.344-.968 1.936.333 3.77.404 5.219.25 3.146-.335
+5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.594-.938 1.151-.115 2.297.366 6.375-.062s5.589-.562 6.313-.781c.739-.224 1.795-.514 2.437-1.031 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.031-.781.241-.081.494-.13.781-.156 1.152-.106 2.293.392 6.375 0s5.59-.531 6.313-.75c.72-.219 1.7-.448 2.343-.938 1.939.35 3.77.454 5.22.313 3.148-.309 5.175-.474 7.187-.657 2.011-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.588-.501 6.312-.719c.74-.222 1.796-.514 2.438-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.177-.523 7.187-.72 1.613-.156 2.266-.63 3.032-.874.24-.088.463-.122.75-.156 1.148-.14 2.316.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.312-1.093 1.92.212 3.72.151 5.157-.094 3.119-.533 5.111-.929 7.093-1.313 1.983-.383 2.475-1.04 3.563-1.28 1.129-.251 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.722-.376 1.762-.87
+2.375-1.531 1.963-.012 3.794-.291 5.219-.844 2.95-1.145 4.873-1.87 6.687-2.75 1.456-.706 2.32-1.702 2.531-2 .213-.298.1-.729.125-.75.043-.035.34-.094.5-.437.86-1.848 2.324-5.628 2.438-6.313.114-.682.168-1.353.219-1.75.029-.23-.147-.879-.125-.937.03-.082.288-.251.343-.5.267-1.199.09-2.208-.125-3.625-.213-1.418-.971-4.615-1.625-5.47-.658-.861-1.224-1.01-1.75-1z" enable-background="new" fill="#bcb786" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="kk" x="-.082" y="-.227" width="1.163" height="1.453">
+   <feGaussianBlur stdDeviation="2.437"/>
+  </filter>
+  <filter id="kj" x="-.041" y="-.113" width="1.082" height="1.227">
+   <feGaussianBlur stdDeviation="1.219"/>
+  </filter>
+  <clipPath id="kl">
+   <path d="M1049.2-282.27l-.09.008c-1.387.884-6.603 1.607-6.629 9.523-.024 7.426 15.013 17.091 17.156 18.094 1.73.81 3.592 1.41 5.406 1.72l1.438.218c1.92.212 3.72.151 5.156-.094 3.12-.532 5.112-.928 7.094-1.312 1.982-.384 2.474-1.04 3.562-1.281 1.129-.251 2.27.116 6.25-.875 3.98-.992 5.43-1.42 6.125-1.782.723-.376 1.762-.87 2.375-1.53 1.963-.013 3.794-.292 5.219-.845 2.951-1.144 4.873-1.869 6.688-2.75 1.455-.706 2.319-1.702 2.53-2 .213-.298.1-.728.126-.75.043-.035.34-.094.5-.437.859-1.847 2.323-5.628 2.437-6.313.114-.682.168-1.352.219-1.75.029-.23-.147-.879-.125-.937.031-.082.288-.25.344-.5.266-1.198.089-2.208-.125-3.625-.214-1.418-.972-4.615-1.625-5.469-.42-.548-.8-.792-1.157-.906-.067-.017-.123-.047-.187-.063-.021-.004-.042.003-.062 0-.312-.075-.609-.158-1.156-.218-.986-.109-2.425-.26-3.969-.25-.515.003-1.037.047-1.563.093-3.558.313-9.01.991-10.218
+1.625-1.634-.334-3.949-.612-5.938-.468-3.064.22-4.968.342-6.906.468-1.939.127-1.686.389-2.906.469-1.32.087-1.787-.223-5.563.094-3.546.297-8.98.993-10.22 1.625-1.632-.335-3.945-.613-5.937-.469-3.064.221-4.967.373-6.906.5-.659.043-1.042.124-1.344.187z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
+  </clipPath>
+  <filter id="km" x="-.022" width="1.044">
+   <feGaussianBlur stdDeviation=".575"/>
+  </filter>
+  <clipPath id="kn">
+   <path d="M205.47-408.97l-.09.002c-1.446.786-6.7 1.143-7.276 9.039-.542 7.405 13.786 18.096 15.854 19.245 1.67.927 3.484 1.655 5.273 2.09l1.419.32c1.9.344 3.7.41 5.15.265 3.149-.314 5.164-.57 7.168-.815 2.004-.245 2.54-.865 3.643-1.03 1.144-.172 2.257.274 6.296-.438s5.515-1.038 6.234-1.35c.747-.325 1.818-.746 2.476-1.362 1.96.124 3.805-.026 5.265-.479 3.024-.936 4.991-1.525 6.863-2.277 1.501-.603 2.432-1.536 2.664-1.819.233-.282.15-.72.177-.74.045-.032.346-.07.53-.4.985-1.784 2.709-5.453 2.87-6.128.162-.673.263-1.338.34-1.73.046-.228-.085-.888-.059-.945.037-.08.305-.23.378-.475.35-1.177.243-2.195.128-3.625-.115-1.429-.648-4.67-1.24-5.568-.38-.577-.742-.846-1.09-.985-.066-.022-.12-.055-.183-.075-.02-.005-.042 0-.063-.004-.305-.097-.596-.2-1.138-.299-.975-.176-2.4-.428-3.942-.526a19.346 19.346 0 0
+0-1.565-.015c-3.572.064-9.057.361-10.307.91-1.606-.448-3.896-.886-5.89-.882-3.072.007-4.98-.005-6.922-.013-1.943-.01-1.71.27-2.932.265-1.322-.005-1.767-.347-5.556-.294-3.558.05-9.028.365-10.307.91-1.606-.448-3.893-.887-5.89-.882-3.072.007-4.982.027-6.924.018-.661-.003-1.049.05-1.354.093z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
+  </clipPath>
+  <linearGradient id="w" x1="774.98" x2="755.12" y1="-211.87" y2="-202.68" gradientTransform="translate(-19.092 4.243)" gradientUnits="userSpaceOnUse" xlink:href="#n"/>
+  <mask id="jm" maskUnits="userSpaceOnUse">
+   <path d="m718.41-224.31l33.25 56 276-24 159.5-48.25-66.5-82.75-402.25 99z" fill="url(#w)" fill-rule="evenodd"/>
+  </mask>
+  <clipPath id="kg">
+   <path d="M734.03 519.49s16.755 37.018 28.701 53.954 52.727 56.046 52.727 56.046l.597-138.59" enable-background="accumulate" fill="#1a1a1a" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <filter id="jn">
+   <feGaussianBlur stdDeviation="10.662"/>
+  </filter>
+  <filter id="ip">
+   <feGaussianBlur stdDeviation="7.18"/>
+  </filter>
+  <clipPath id="iq">
+   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="in">
+   <feGaussianBlur stdDeviation="6.82"/>
+  </filter>
+  <clipPath id="io">
+   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="ij" x="-.144" y="-.103" width="1.288" height="1.206">
+   <feGaussianBlur stdDeviation="7.389"/>
+  </filter>
+  <clipPath id="ik">
+   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="ih" x="-.09" y="-.103" width="1.181" height="1.205">
+   <feGaussianBlur stdDeviation="5.346"/>
+  </filter>
+  <clipPath id="ii">
+   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <clipPath id="gc">
+   <path d="M569.03 1018.8c-4.286.714-27.628 3.618-57.857 10s-99.775 25.962-142.86 35.714-117.26 34.816-156.91 27.265c-39.648-7.55-89.516-64.408-89.516-64.408l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" fill="#0b0b0b" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <filter id="gb" x="-.211" y="-.168" width="1.422" height="1.336">
+   <feGaussianBlur stdDeviation="8.369"/>
+  </filter>
+  <clipPath id="fz">
+   <path d="M205.47-408.97l-.09.002c-1.446.786-6.7 1.143-7.276 9.039-.542 7.405 13.786 18.096 15.854 19.245 1.67.927 3.484 1.655 5.273 2.09l1.419.32c1.9.344 3.7.41 5.15.265 3.149-.314 5.164-.57 7.168-.815 2.004-.245 2.54-.865 3.643-1.03 1.144-.172 2.257.274 6.296-.438s5.515-1.038 6.234-1.35c.747-.325 1.818-.746 2.476-1.362 1.96.124 3.805-.026 5.265-.479 3.024-.936 4.991-1.525 6.863-2.277 1.501-.603 2.432-1.536 2.664-1.819.233-.282.15-.72.177-.74.045-.032.346-.07.53-.4.985-1.784 2.709-5.453 2.87-6.128.162-.673.263-1.338.34-1.73.046-.228-.085-.888-.059-.945.037-.08.305-.23.378-.475.35-1.177.243-2.195.128-3.625-.115-1.429-.648-4.67-1.24-5.568-.38-.577-.742-.846-1.09-.985-.066-.022-.12-.055-.183-.075-.02-.005-.042 0-.063-.004-.305-.097-.596-.2-1.138-.299-.975-.176-2.4-.428-3.942-.526a19.346 19.346 0 0
+0-1.565-.015c-3.572.064-9.057.361-10.307.91-1.606-.448-3.896-.886-5.89-.882-3.072.007-4.98-.005-6.922-.013-1.943-.01-1.71.27-2.932.265-1.322-.005-1.767-.347-5.556-.294-3.558.05-9.028.365-10.307.91-1.606-.448-3.893-.887-5.89-.882-3.072.007-4.982.027-6.924.018-.661-.003-1.049.05-1.354.093z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
+  </clipPath>
+  <filter id="fy" x="-.022" width="1.044">
+   <feGaussianBlur stdDeviation=".575"/>
+  </filter>
+  <clipPath id="fx">
+   <path d="M1049.2-282.27l-.09.008c-1.387.884-6.603 1.607-6.629 9.523-.024 7.426 15.013 17.091 17.156 18.094 1.73.81 3.592 1.41 5.406 1.72l1.438.218c1.92.212 3.72.151 5.156-.094 3.12-.532 5.112-.928 7.094-1.312 1.982-.384 2.474-1.04 3.562-1.281 1.129-.251 2.27.116 6.25-.875 3.98-.992 5.43-1.42 6.125-1.782.723-.376 1.762-.87 2.375-1.53 1.963-.013 3.794-.292 5.219-.845 2.951-1.144 4.873-1.869 6.688-2.75 1.455-.706 2.319-1.702 2.53-2 .213-.298.1-.728.126-.75.043-.035.34-.094.5-.437.859-1.847 2.323-5.628 2.437-6.313.114-.682.168-1.352.219-1.75.029-.23-.147-.879-.125-.937.031-.082.288-.25.344-.5.266-1.198.089-2.208-.125-3.625-.214-1.418-.972-4.615-1.625-5.469-.42-.548-.8-.792-1.157-.906-.067-.017-.123-.047-.187-.063-.021-.004-.042.003-.062 0-.312-.075-.609-.158-1.156-.218-.986-.109-2.425-.26-3.969-.25-.515.003-1.037.047-1.563.093-3.558.313-9.01.991-10.218
+1.625-1.634-.334-3.949-.612-5.938-.468-3.064.22-4.968.342-6.906.468-1.939.127-1.686.389-2.906.469-1.32.087-1.787-.223-5.563.094-3.546.297-8.98.993-10.22 1.625-1.632-.335-3.945-.613-5.937-.469-3.064.221-4.967.373-6.906.5-.659.043-1.042.124-1.344.187z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
+  </clipPath>
+  <filter id="fw" x="-.082" y="-.227" width="1.163" height="1.453">
+   <feGaussianBlur stdDeviation="2.437"/>
+  </filter>
+  <filter id="fv" x="-.041" y="-.113" width="1.082" height="1.227">
+   <feGaussianBlur stdDeviation="1.219"/>
+  </filter>
+  <clipPath id="y">
+   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <filter id="fu" x="-.252" y="-.053" width="1.503" height="1.106">
+   <feGaussianBlur stdDeviation="13.025"/>
+  </filter>
+  <clipPath id="fs">
+   <path d="M734.03 519.49s16.755 37.018 28.701 53.954 52.727 56.046 52.727 56.046l.597-138.59" enable-background="accumulate" fill="#1a1a1a" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <filter id="fr" x="-.274" y="-.213" width="1.549" height="1.427">
+   <feGaussianBlur stdDeviation="11.314"/>
+  </filter>
+  <clipPath id="fq">
+   <path d="M178.21 274.15c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="aq">
+   <feGaussianBlur stdDeviation="2.04"/>
+  </filter>
+  <filter id="g">
+   <feTurbulence baseFrequency=".24" numOctaves="10" result="result0" seed="655" type="fractalNoise"/>
+   <feDisplacementMap in="SourceGraphic" in2="result0" scale="62" xChannelSelector="B" yChannelSelector="G"/>
+  </filter>
+  <clipPath id="fp">
+   <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+  </clipPath>
+  <filter id="fo" x="-.353" y="-.182" width="1.706" height="1.363">
+   <feGaussianBlur stdDeviation="48.038"/>
+  </filter>
+  <clipPath id="fn">
+   <path d="m265.94 126.68l-18.767 168.86 174.11-73.121 61.954 88.659 57.884-31.99-37.534-180.06-237.64 27.649z" fill-rule="evenodd" stroke="#000" stroke-width=".9"/>
+  </clipPath>
+  <filter id="fm" x="-.277" y="-.325" width="1.554" height="1.65">
+   <feGaussianBlur stdDeviation="19.956"/>
+  </filter>
+  <mask id="fk" maskUnits="userSpaceOnUse">
+   <ellipse transform="translate(-174.03 62.156)" cx="579.47" cy="260.58" rx="192.69" ry="164.05" enable-background="accumulate" fill="url(#dt)"/>
+  </mask>
+  <filter id="fj" x="-.611" y="-.149" width="2.223" height="1.299">
+   <feGaussianBlur stdDeviation="37.83"/>
+  </filter>
+  <filter id="fi" x="-.259" y="-.224" width="1.518" height="1.447">
+   <feGaussianBlur stdDeviation="19.632"/>
+  </filter>
+  <filter id="fh" x="-.3" y="-.3" width="1.6" height="1.6">
+   <feGaussianBlur stdDeviation="2"/>
+  </filter>
+  <clipPath id="x">
+   <path d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 12.61-67.045 3.214-93.929-9.434-26.993-34.967-59.124-66.429-69.643-31.033-10.375-65.018-4.848-84.286 5.714z" fill="#f5ff04" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="hd">
+   <feGaussianBlur stdDeviation="6.589"/>
+  </filter>
+  <filter id="hc">
+   <feGaussianBlur stdDeviation="1.505"/>
+  </filter>
+  <filter id="hb" x="-.243" y="-.391" width="1.487" height="1.782">
+   <feGaussianBlur stdDeviation="14.59"/>
+  </filter>
+  <filter id="ha" x="-.146" y="-.235" width="1.292" height="1.47">
+   <feGaussianBlur stdDeviation="4.444"/>
+  </filter>
+  <filter id="gz">
+   <feGaussianBlur stdDeviation=".606"/>
+  </filter>
+  <clipPath id="if">
+   <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
+  </clipPath>
+  <mask id="gy" maskUnits="userSpaceOnUse">
+   <path d="m718.41-224.31l33.25 56 276-24 159.5-48.25-66.5-82.75-402.25 99z" fill="url(#w)" fill-rule="evenodd"/>
+  </mask>
+  <clipPath id="gx">
+   <path transform="translate(.08 -.031)" d="M1111.4-285.94l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.313-.486.21-1.737.584-4.093 1.469-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.594c-1.895.42-1.675.642-2.875.875-1.296.251-1.721-.01-5.437.78-3.49.743-8.895 1.932-10.156 2.688-1.584-.18-3.868-.321-5.844-.03-3.04.446-4.916.672-6.844.905-.655.08-1.04.201-1.344.282-.426.131-.685.26-1.375.343-1.311.16-1.762-.156-5.53.282-3.555.413-9.006 1.272-10.25 1.937-1.6-.297-3.859-.534-5.845-.344-3.058.294-4.972.484-6.906.657-1.934.172-1.688.422-2.906.53-1.316.119-1.76-.163-5.531.25-3.542.39-9.008 1.21-10.281 1.876-1.6-.295-3.887-.507-5.875-.313-3.059.3-4.941.48-6.875.657-.658.06-1.04.178-1.344.25-.428.119-.683.218-1.375.28-1.316.121-1.76-.194-5.531.22-3.556.39-9.006 1.239-10.25
+1.906-1.599-.294-3.86-.524-5.844-.313-3.056.326-4.974.527-6.906.719s-1.69.44-2.906.563c-1.315.131-1.763-.165-5.532.28-3.539.42-8.977 1.293-10.25 1.97-1.597-.281-3.86-.42-5.843-.188-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.128-.685.268-1.375.344-1.314.146-1.768-.174-5.531.313-3.55.458-8.979 1.419-10.22 2.125-1.593-.245-3.833-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.924.258-1.726.493-2.937.656-1.31.176-1.748-.104-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.254-5.813.094-3.026.536-4.899.862-6.812 1.188-.651.11-1.014.27-1.313.375-.42.164-.663.33-1.344.468-1.294.262-1.727-.006-5.437.813-3.499.772-8.846 2.383-10.062 3.219-1.563-.078-3.758.085-5.688.593-2.972.783-4.817 1.232-6.687 1.75s-1.667.768-2.844 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.93.928-4.75 1.459-6.594
+2.063-.626.205-.991.393-1.28.531-.408.214-.654.409-1.313.625-1.255.412-1.687.19-5.282 1.438-3.39 1.177-8.595 3.213-9.78 4.156-1.525.06-3.65.395-5.532 1.062-2.897 1.029-4.699 1.676-6.531 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.47-1.507.107-3.635.498-5.5 1.218a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.594v.03l-8 3.188 1.812 14.72c-.258-.062 6.188 3.312 6.188 3.312.226-.145.449-.273.718-.375 1.08-.41 2.172-.216 6-1.688 3.829-1.471 5.224-2.005 5.907-2.406.68-.4 1.611-.88 2.218-1.531 1.827-.138 3.571-.493 4.938-1 2.968-1.1 4.875-1.806 6.781-2.469 1.906-.662 2.354-1.415 3.406-1.781 1.092-.38 2.195-.166 6.063-1.531 3.867-1.366 5.283-1.827 5.969-2.22.7-.4 1.7-.932 2.312-1.593 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.927-1.622 6.844-2.25 1.539-.504 2.174-1.047 2.906-1.437.23-.135.476-.254.75-.344 1.099-.36 2.182-.082
+6.094-1.313 3.912-1.23 5.366-1.673 6.063-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.635-.267 5.03-.688 3.031-.913 4.993-1.43 6.938-1.968 1.945-.539 2.427-1.265 3.5-1.563 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.735-.33 1.814-.754 2.437-1.375 1.998.116 3.858-.02 5.344-.375 3.078-.735 5.084-1.101 7.063-1.5 1.588-.32 2.244-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.133-.23 2.304.209 6.343-.5 4.04-.709 5.5-.927 6.22-1.187.715-.26 1.704-.568 2.343-1.094 1.924.24 3.748.224 5.188 0 3.126-.488 5.154-.7 7.156-.969 2.001-.268 2.489-.945 3.594-1.094 1.146-.154 2.275.302 6.343-.219 4.068-.52 5.56-.695 6.282-.937.737-.247 1.798-.586 2.437-1.125 2.05.336 3.974.398 5.5.219 3.142-.37 5.18-.56 7.188-.782 1.61-.178 2.264-.608 3.03-.843.242-.086.495-.156.782-.188 1.15-.127 2.301.347 6.375-.125s5.559-.61 6.281-.844c.72-.232 1.7-.473 2.344-.968 1.936.333 3.77.404 5.219.25 3.146-.335
+5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.594-.938 1.151-.115 2.297.366 6.375-.062s5.589-.562 6.313-.781c.739-.224 1.795-.514 2.437-1.031 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.031-.781.241-.081.494-.13.781-.156 1.152-.106 2.293.392 6.375 0s5.59-.531 6.313-.75c.72-.219 1.7-.448 2.343-.938 1.939.35 3.77.454 5.22.313 3.148-.309 5.175-.474 7.187-.657 2.011-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.588-.501 6.312-.719c.74-.222 1.796-.514 2.438-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.177-.523 7.187-.72 1.613-.156 2.266-.63 3.032-.874.24-.088.463-.122.75-.156 1.148-.14 2.316.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.312-1.093 1.92.212 3.72.151 5.157-.094 3.119-.533 5.111-.929 7.093-1.313 1.983-.383 2.475-1.04 3.563-1.28 1.129-.251 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.722-.376 1.762-.87
+2.375-1.531 1.963-.012 3.794-.291 5.219-.844 2.95-1.145 4.873-1.87 6.687-2.75 1.456-.706 2.32-1.702 2.531-2 .213-.298.1-.729.125-.75.043-.035.34-.094.5-.437.86-1.848 2.324-5.628 2.438-6.313.114-.682.168-1.353.219-1.75.029-.23-.147-.879-.125-.937.03-.082.288-.251.343-.5.267-1.199.09-2.208-.125-3.625-.213-1.418-.971-4.615-1.625-5.47-.658-.861-1.224-1.01-1.75-1z" enable-background="new" fill="#bcb786" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="gw">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gv" x="-.103" y="-.342" width="1.206" height="1.685">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gu" x="-.099" y="-.226" width="1.198" height="1.453">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gt" x="-.098" y="-.198" width="1.196" height="1.397">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gs">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gr" x="-.098" y="-.198" width="1.197" height="1.395">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gq" x="-.098" y="-.198" width="1.196" height="1.397">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gp" x="-.098" y="-.203" width="1.197" height="1.406">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="go" x="-.098" y="-.209" width="1.197" height="1.417">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gn" x="-.099" y="-.225" width="1.198" height="1.451">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gm" x="-.101" y="-.274" width="1.201" height="1.548">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gl" x="-.102" y="-.324" width="1.204" height="1.647">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gk" x="-.103" y="-.364" width="1.207" height="1.729">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gj" x="-.105" y="-.405" width="1.209" height="1.809">
+   <feGaussianBlur stdDeviation="1.168"/>
+  </filter>
+  <filter id="gi">
+   <feGaussianBlur stdDeviation="1.723"/>
+  </filter>
+  <filter id="gh">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="gg" x="-.031" y="-.103" width="1.062" height="1.205">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="gf">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="ge">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="ff">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="fe">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="fd">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="fc">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="fb">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="fa">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="ez">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="ey">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="ex" x="-.031" y="-.109" width="1.062" height="1.219">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <filter id="ew" x="-.031" y="-.121" width="1.063" height="1.243">
+   <feGaussianBlur stdDeviation=".35"/>
+  </filter>
+  <clipPath id="ie">
+   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="id">
+   <feGaussianBlur stdDeviation="7.18"/>
+  </filter>
+  <clipPath id="ic">
+   <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="gd">
+   <feGaussianBlur stdDeviation="6.82"/>
+  </filter>
+  <clipPath id="ev">
+   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="eu" x="-.144" y="-.103" width="1.288" height="1.206">
+   <feGaussianBlur stdDeviation="7.389"/>
+  </filter>
+  <clipPath id="et">
+   <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+  </clipPath>
+  <filter id="es" x="-.09" y="-.103" width="1.181" height="1.205">
+   <feGaussianBlur stdDeviation="5.346"/>
+  </filter>
+  <marker id="eq" overflow="visible" orient="auto">
+   <path d="m-1.2 0l-1 1 3.5-1-3.5-1 1 1z" fill="#f8d615" fill-rule="evenodd" stroke="#f8d615" stroke-width=".2pt"/>
+  </marker>
+  <radialGradient id="r" cx="142.96" cy="107.09" r="66.982" gradientTransform="matrix(-.33248 .90223 -.95824 -.35312 305.29 19.909)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#1e2323" offset="0"/>
+   <stop stop-color="#181d1d" offset=".56"/>
+   <stop offset="1"/>
+  </radialGradient>
+  <radialGradient id="q" cx="317.79" cy="129.65" r="47.863" gradientTransform="matrix(1.0036 0 0 1.6613 -160.53 -96.205)" gradientUnits="userSpaceOnUse" xlink:href="#u"/>
+  <radialGradient id="p" cx="325.31" cy="80.91" r="26.938" gradientTransform="matrix(2.0748 -.1578 .23824 3.1325 -550.77 -65.729)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#283131" stop-opacity="0" offset="0"/>
+   <stop stop-color="#1e2424" stop-opacity="0" offset=".513"/>
+   <stop offset="1"/>
+  </radialGradient>
+  <linearGradient id="kt" x1="347.9" x2="275.58" y1="1070.2" y2="867.98" gradientUnits="userSpaceOnUse">
+   <stop offset="0"/>
+   <stop offset=".022"/>
+   <stop offset=".759"/>
+   <stop stop-color="#232323" offset=".885"/>
+   <stop stop-color="#595959" offset="1"/>
+  </linearGradient>
+  <linearGradient id="kh" x1="603.84" x2="616.24" y1="627.85" y2="585.43" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse" xlink:href="#t"/>
+  <linearGradient id="el" x1="609.31" x2="560.83" y1="239.47" y2="262.86" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#0a0c0c" offset="0"/>
+   <stop stop-color="#1f2727" stop-opacity="0" offset="1"/>
+  </linearGradient>
+  <radialGradient id="ek" cx="543.67" cy="147.31" r="47.863" gradientTransform="matrix(2.1382 0 0 2.3383 -77.038 -101.69)" gradientUnits="userSpaceOnUse" xlink:href="#u"/>
+  <radialGradient id="ef" cx="385" cy="237.01" r="86.929" gradientTransform="matrix(1 0 0 .8562 0 34.08)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#ada469" offset="0"/>
+   <stop stop-color="#ada469" offset=".811"/>
+   <stop stop-color="#fff" offset="1"/>
+  </radialGradient>
+  <linearGradient id="ee" x1="398.21" x2="379.29" y1="343.52" y2="265.31" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse" xlink:href="#s"/>
+  <radialGradient id="ed" cx="397.16" cy="336.95" r="36.75" gradientTransform="translate(-375.32 -318.42) scale(1.945)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#344040" offset="0"/>
+   <stop stop-color="#222929" offset=".5"/>
+   <stop offset="1"/>
+  </radialGradient>
+  <radialGradient id="ec" cx="402.49" cy="317.24" r="23.714" gradientTransform="translate(-1358.3 -1070.7) scale(4.3777)" gradientUnits="userSpaceOnUse">
+   <stop offset="0"/>
+   <stop stop-color="#1d1d1d" offset="1"/>
+  </radialGradient>
+  <radialGradient id="eb" cx="250.23" cy="475.1" r="95.989" gradientTransform="matrix(1.2259 -.70777 .1414 .24491 322.22 608.92)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#d9e002" offset="0"/>
+   <stop stop-color="#a9ae01" offset=".5"/>
+   <stop stop-color="#717501" offset="1"/>
+  </radialGradient>
+  <radialGradient id="m" cx="228.81" cy="440.27" r="119.18" gradientTransform="matrix(1.1323 .76595 -1.455 2.151 588.75 -711.8)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#ff0" offset="0"/>
+   <stop stop-color="#b2b200" offset="1"/>
+  </radialGradient>
+  <radialGradient id="dz" cx="275.44" cy="335.35" r="36.75" gradientTransform="matrix(.05911 2.687 -.72343 .01591 408.73 -424.56)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#ff0" offset="0"/>
+   <stop stop-color="#ff0" stop-opacity="0" offset="1"/>
+  </radialGradient>
+  <linearGradient id="l" x1="182.35" x2="145.53" y1="256.11" y2="542.21" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#7d7d00" offset="0"/>
+   <stop stop-color="#c6c700" offset=".364"/>
+   <stop stop-color="#f6f800" offset="1"/>
+  </linearGradient>
+  <radialGradient id="dy" cx="296.34" cy="427.18" r="19.704" gradientTransform="translate(-599.29 -827.09) scale(2.9797)" gradientUnits="userSpaceOnUse">
+   <stop stop-opacity="0" offset="0"/>
+   <stop offset="1"/>
+  </radialGradient>
+  <radialGradient id="dx" cx="429.57" cy="377.43" r="72.08" gradientTransform="matrix(1 0 0 .61803 0 144.16)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#e2e2e2" offset="0"/>
+   <stop stop-color="#e2e2e2" stop-opacity="0" offset="1"/>
+  </radialGradient>
+  <radialGradient id="dw" cx="437.7" cy="391.22" r="36.612" gradientTransform="matrix(1 0 0 .61803 0 149.43)" gradientUnits="userSpaceOnUse">
+   <stop stop-color="#c7bd80" offset="0"/>
+   <stop stop-color="#c7bd80" stop-opacity="0" offset="1"/>
+  </radialGradient>
+  <linearGradient id="dv" x1="412.09" x2="417.38" y1="404.92" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+  <linearGradient id="du" x1="411.91" x2="417.38" y1="404.92" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+  <linearGradient id="ej" x1="411.91" x2="417.38" y1="405.54" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+  <linearGradient id="ei" x1="412.09" x2="417.38" y1="405.54" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+  <linearGradient id="eh" x1="411.73" x2="417.38" y1="405.54" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+  <linearGradient id="jr" x1="1255.7" x2="893.7" y1="667.09" y2="858.01" gradientUnits="userSpaceOnUse" xlink:href="#n"/>
+  <linearGradient id="ft" x1="603.84" x2="616.24" y1="627.85" y2="585.43" gradientTransform="matrix(1.0057 0 0 2.3995 3424.4 -24.137)" gradientUnits="userSpaceOnUse" xlink:href="#t"/>
+  <radialGradient id="fl" cx="418.3" cy="342.48" r="131.45" gradientTransform="matrix(1.3957 .62111 -.42441 .95372 -15.062 -227.97)" gradientUnits="userSpaceOnUse" xlink:href="#s"/>
+  <radialGradient id="fg" cx="275.44" cy="335.35" r="36.75" gradientTransform="matrix(.05911 2.687 -.72343 .01591 408.73 -424.56)" gradientUnits="userSpaceOnUse" xlink:href="#n"/>
+  <clipPath id="ga">
+   <path d="M3492.3 296.46H3930v902.66h-437.7z" fill="#fff"/>
+  </clipPath>
+ </defs>
+ <g stroke-miterlimit="1">
+  <path d="M10.45 109.38h1876.7v1563H10.45z" enable-background="new" fill="#a8a8a8" stroke="#000" stroke-width="20.9"/>
+  <path d="M2337.1 111.42h1878.8v1565H2337.1z" enable-background="new" fill="none" stroke="#000" stroke-width="20.925"/>
+  <path d="M2358.4 132.96h1833.4v1522.9H2358.4z" enable-background="new" fill="#a8a8a8" stroke="#f83615" stroke-width="20.391"/>
+ </g>
+ <g fill-rule="evenodd">
+  <path transform="translate(-2833.5 -4370) scale(10.727)" d="M304.64 526.65c-10 .357-18.214 2.857-18.214 2.857l7.5 6.071 10.357 3.572 16.071.357 22.5-5.357 7.857 1.071 20.357-2.143-10.357 6.786c5.46-1.023 17.393 3.57 9.643 5.357-1.74.402 13.929-4.643 13.929-4.643l2.5-4.642 3.571-9.286h11.43l18.213-4.643 3.572-5-16.071 1.071-12.143 2.143-14.643-5-70.692 16.708-5.38-5.279z" enable-background="new" filter="url(#ep)" opacity=".5"/>
+  <g enable-background="new">
+   <path transform="matrix(.71084 -.19374 .26296 .96481 552.25 332.01)" d="m245.12 100.05s-47.128-31.647-67.215-35.801c-20.038-4.144-38.473-3.318-51.934 13.607s-12.077 61.265-13.536 86.97 2.55 70.177 17.605 88.666c15.055 18.488 45.886 13.585 49.927 21.414 2.213 4.287 65.152-174.86 65.152-174.86z" enable-background="accumulate" fill="url(#r)"/>
+   <path transform="matrix(.71084 -.19374 .26296 .96481 552.25 332.01)" d="M135.38 82.018s26.344 1.939 37.633 13.903c11.415 12.097 13.735 21.332 15.296 37.735 1.563 16.425-.85 28.418-7.814 36.037s-1.004 19.583-25.916 12.071-27.032-27.783-26.515-46.305c.517-18.529 7.316-53.441 7.316-53.441z" enable-background="accumulate" fill="url(#q)"/>
+   <path transform="matrix(.71084 -.19374 .26296 .96481 552.25 332.01)" d="M135.65 81.927s-4.645 16.365.588 28.563c5.488 12.793 27.224 44.26 27.224 54.656l22.656-5c2.542-6.966 3.21-15.752 2.188-26.5-1.562-16.403-3.867-25.621-15.281-37.719-9.655-10.232-31.593-13.375-37.375-14z" enable-background="new" fill="url(#p)"/>
+  </g>
+  <path d="m893.6 1350.3c-4.286 0.714-27.628 3.618-57.857 10s-57.314 4.966-135.79 17.33c-79.852 12.581-94.064 42.542-108.12 47.064-14.7 4.729-145.38-65.822-145.38-65.822l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" stroke="#000"/>
+  <path transform="translate(324.57 331.53)" d="m332.34 898.39l-32.732-61.3-37.617 45.106c2.177 1.317 5.774-20.856 45.6-64.417l24.749 80.61z" clip-path="url(#eo)" enable-background="accumulate" fill="#fff" filter="url(#kv)" opacity=".5"/>
+  <path transform="translate(324.57 331.53)" d="m200.82 863.03l146.37-51.619 243.95 226.27-241.83 140.01-181.02-87.681 32.527-226.98z" clip-path="url(#ku)" enable-background="accumulate" fill="url(#kt)" filter="url(#ks)"/>
+  <path d="m691.46 835.66s-29.554 40.573-47.857 74.286-58.621 126.36-70.357 171.07c-11.759 44.803-62.5 123.57-62.5 123.57l76.071 18.214s11.807-12.823 31.071-46.071 60.357-138.57 60.357-138.57l13.214-202.5z" enable-background="accumulate" fill="#0f0f0f"/>
+  <path transform="translate(324.57 331.53)" d="m430.28 381.94c-7.071 2.828-236.18 32.152-236.18 32.152l-39.64 359.83 90.198 92.64 52.326-114.55 100.47-186.39 32.828-183.68z" clip-path="url(#kr)" enable-background="accumulate" fill="#fff" filter="url(#kq)" opacity=".4"/>
+  <path d="m1018.2 1359.5s23.256 11.394 36.068 20.476c12.697 9.001 29.472 24.649 41.692 37.36 12.306 12.8 20.113 22.599 41.533 24.161 21.432 1.563 53.282-8.788 73.296-24.664 20.014-15.877 45.647-69.233 45.647-69.233l-127.16-143.07" enable-background="accumulate" stroke="#000"/>
+  <path transform="translate(324.57 331.53)" d="M331.34 641.5L216.17 835.36l44.042 90.598 97.581-193.75-26.456-90.711z" clip-path="url(#kp)" enable-background="accumulate" filter="url(#ko)" opacity=".75"/>
+  <g enable-background="new">
+   <path d="M1113.913 623.101l-.09-.002c-1.48.72-6.744.842-7.674 8.704-.872 7.373 12.962 18.694 14.976 19.936 1.626 1.001 3.407 1.81 5.174 2.325l1.403.382c1.883.43 3.679.575 5.134.496 3.16-.173 5.184-.339 7.197-.493 2.013-.155 2.577-.75 3.686-.866 1.15-.12 2.242.375 6.309-.155 4.066-.53 5.556-.79 6.288-1.07.76-.29 1.85-.663 2.534-1.25 1.952.213 3.803.145 5.281-.241 3.063-.8 5.055-1.3 6.958-1.968 1.527-.536 2.499-1.426 2.744-1.698.245-.271.181-.712.21-.73.046-.03.348-.055.546-.378 1.065-1.737 2.951-5.325 3.143-5.993.191-.664.322-1.324.417-1.713.056-.225-.045-.89-.017-.946.04-.078.315-.216.399-.457.402-1.16.34-2.183.29-3.616-.05-1.433-.438-4.695-.99-5.618-.353-.593-.703-.88-1.044-1.033-.065-.025-.118-.06-.18-.083-.02-.007-.042-.002-.061-.007-.301-.111-.586-.228-1.124-.35-.966-.22-2.379-.535-3.914-.702a19.278 19.278 0 0
+0-1.563-.085c-3.571-.097-9.064-.045-10.338.446-1.584-.518-3.852-1.06-5.845-1.144-3.069-.13-4.974-.228-6.914-.324-1.94-.095-1.72.194-2.941.134-1.32-.065-1.75-.426-5.537-.543-3.556-.11-9.035-.04-10.338.447-1.584-.52-3.85-1.06-5.845-1.144-3.07-.131-4.978-.197-6.918-.293-.66-.032-1.05.004-1.356.033z" enable-background="new" fill="#bcb786"/>
+   <g transform="rotate(2.568 -22364 20373)" clip-path="url(#kn)" enable-background="new" filter="url(#km)">
+    <path d="M229.94-409.12c-3.558.05-9.024.36-10.303.904-1.606-.447-3.903-.881-5.9-.877a979.03 979.03 0 0 1-6.907 0c-.66-.003-1.048.068-1.353.11v1.096c.12-.18.393-.69.95-.767.747-.103 5.17-.151 7.31-.11 1.775.035 4.455.274 6.39.96.32.113.618.273.891.41 1.964.987 7.944 4.302 7.944 4.302s-6.633-3.948-7.483-4.439c-.203-.117-.575-.258-1.036-.41 1.22-.449 5.076-.62 7.828-.713 3.024-.102 3.348-.09 5.41.192 2.13.29 3.34.602 3.34.602s-.08-.64 1.035-.794c.748-.103 5.17-.152 7.31-.11 2.07.04 5.366.407 7.282 1.37 1.003.504 3.035 1.569 4.795 2.536l.096-.02s-3.58-2.162-4.43-2.653c-.204-.117-.575-.258-1.037-.411 1.22-.448 5.047-.62 7.8-.712 3.024-.102 3.347-.09 5.41.191 1.954.267 3.013.53 3.195.576l-.027-.312a8.503 8.503 0 0 0-1.4-.357c-1.301-.235-3.4-.602-5.51-.564-3.571.064-9.052.356-10.302.904-1.606-.447-3.877-.881-5.871-.877-3.072.007-4.994.01-6.936
+0-1.943-.009-1.713.28-2.936.274-1.322-.005-1.766-.354-5.555-.301M206.2-407.48c1.92.817 4.577 2.193 6.159 3.397s2.908 1.774 5.555 3.918c.885.718 1.748 1.35 2.591 1.922l.541-.19a57.511 57.511 0 0 1-2.269-1.622c-2.822-2.12-3.627-2.81-6.015-4.274s-4.1-2.366-6.562-3.15" enable-background="new"/>
+    <path d="M237.8-407.48c1.92.817 4.606 2.193 6.188 3.397.813.62 1.558 1.07 2.45 1.654l.65-.116a40.414 40.414 0 0 0-2.697-1.784c-2.389-1.465-4.128-2.366-6.59-3.151" enable-background="new"/>
+   </g>
+   <g transform="rotate(6.561 -6814.9 734.73)" clip-path="url(#kl)">
+    <path d="M1056.2-278.8c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#kk)" opacity=".75"/>
+    <path d="M1058.5-275.43c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#kj)" opacity=".75"/>
+   </g>
+  </g>
+  <path d="M676.821 543.52c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.026 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#101414"/>
+  <path transform="translate(324.57 331.53)" d="M311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24-38.612-142.96-39.243-189.12-.631-46.184 10.83-108.61 30.678-158.3 20.048-50.192 36.897-44.846 42.125-92.593s-17.426-149.39-17.426-149.39l-55.86 39.598z" clip-path="url(#en)" enable-background="accumulate" fill="#fff" filter="url(#ki)" opacity=".25"/>
+  <path transform="translate(48.571 195.53)" d="m1010 655.49s16.755 37.018 28.702 53.954c11.946 16.936 52.727 56.046 52.727 56.046l52.597-127.59" enable-background="accumulate" fill="url(#kh)"/>
+  <path transform="translate(324.57 331.53)" d="m730.32 536.57c0 8.485 42.548 58.468 42.548 58.468l12.607-28.77-55.154-29.698z" clip-path="url(#kg)" enable-background="accumulate" fill="#fff" filter="url(#kf)" opacity=".08"/>
+ </g>
+ <g transform="translate(498.6 269.37)" clip-path="url(#ke)" enable-background="new">
+  <g transform="translate(-174.03 62.156)" filter="url(#em)">
+   <g filter="url(#i)">
+    <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+    <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
+   </g>
+   <g filter="url(#i)">
+    <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+    <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
+   </g>
+  </g>
+  <g enable-background="new" opacity=".18">
+   <g transform="translate(-174.03 62.156)" filter="url(#i)">
+    <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+    <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
+   </g>
+   <g transform="translate(-174.03 62.156)" filter="url(#i)">
+    <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+    <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
+   </g>
+  </g>
+ </g>
+ <g transform="translate(48.571 195.53)" fill-rule="evenodd">
+  <path transform="translate(276 136)" d="m582.66-7.418l113.14 86.267 108.89 258.8 38.184 207.89 120.21 91.924s-12.728-287.09-19.799-313.96-149.91-393.15-149.91-393.15l-210.72 62.225z" clip-path="url(#kd)" enable-background="accumulate" filter="url(#kc)" opacity=".75"/>
+  <path d="m964.14 239.6s8.677 10.897 24.107 11.964c15.43 1.068 49.722-39.953 70.179-52.143 20.479-12.204 47.046-26.602 63.929-20.357 16.882 6.245 22.158 26.436 27.857 48.036 5.7 21.6 6.719 61.814-2.679 92.857-9.397 31.043-50.502 73.104-65.356 103.39s-11.607 39.821-11.607 39.821" enable-background="accumulate" fill="url(#el)"/>
+  <path d="m1124.5 207.63c-15.893-0.893-49.719 12.106-66.071 24.286-16.439 12.244-29.221 24.114-29.286 52.143-0.065 28.206 13.119 39.076 29.107 46.964s33.686 7.12 51.964-11.786c18.278-18.905 14.286-111.61 14.286-111.61z" enable-background="new" fill="url(#ek)"/>
+  <ellipse transform="matrix(.94347 -.12399 .14401 1.0958 451.95 134.6)" cx="385" cy="237.01" rx="86.429" ry="73.929" clip-path="url(#kb)" enable-background="accumulate" fill="url(#ef)" filter="url(#je)" opacity=".75"/>
+  <path transform="translate(450.03 73.844)" d="m527.61 407.45s-122.04 38.403-187.51 9.632c-65.473-28.772-74.377-124.72-74.377-124.72s73.382-80.504 129.92-83.615c55.827-3.072 90.574 20.143 114.87 65.852 24.352 45.813 17.101 132.85 17.101 132.85z" enable-background="accumulate" fill="url(#jd)" mask="url(#jc)"/>
+  <path d="m772.17 393.35s36.218-27.382 51.607-35.893c15.177-8.393 25.714-11.607 35.893-11.607l-15.536 66.964" enable-background="accumulate" fill="url(#ee)"/>
+  <circle transform="translate(449.5 74.915)" cx="409.29" cy="306.65" r="36.25" enable-background="accumulate" fill="url(#ed)"/>
+  <path transform="translate(276 136)" d="m311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24 8.682-72.368-31.243-223.12l17.678-69.296 72.125-138.59-42.426-158.39-55.86 39.598z" clip-path="url(#en)" enable-background="accumulate" fill="#fff" filter="url(#jb)" opacity=".3"/>
+  <path d="m635.21 581.13c-14.142 12.728 39.233 34.58 76.368 24.042s104.64-35.564 103.24-79.196c-1.407-43.632-76.368-128.69-76.368-128.69l-103.24 183.85z" enable-background="accumulate" filter="url(#ja)" opacity=".5"/>
+  <circle transform="translate(449.67 74.915)" cx="410" cy="306.65" r="23.214" enable-background="accumulate" fill="url(#ec)"/>
+  <circle transform="translate(452 73.487)" cx="414.29" cy="303.08" r="7.5" enable-background="accumulate" fill="#fff" filter="url(#iz)" stroke="#000" stroke-linejoin="bevel"/>
+  <path d="m789.32 478.35s7.023 19.569-1.071 35-42.323 38.988-67.5 50c-25.31 11.07-85.473 32.964-101.79 41.964-16.461 9.082-18.214 12.679-18.214 12.679s-7.147-19.064 28.75-51.786c36.172-32.972 142.03-48.05 159.82-87.857z" enable-background="accumulate" fill="url(#eb)"/>
+ </g>
+ <g enable-background="new">
+  <g transform="translate(829.32 270.09)" fill-rule="evenodd">
+   <path transform="translate(-329.81)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#ea)" fill="url(#m)"/>
+   <ellipse transform="rotate(28.068 -88.085 -332.1)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#dz)"/>
+   <ellipse transform="rotate(28.068 -43.578 -333.81)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#iy)"/>
+  </g>
+  <path transform="translate(499.51 270.09)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#ea)" enable-background="new" fill="none" filter="url(#ix)" stroke="url(#l)" stroke-width="20.8"/>
+ </g>
+ <g transform="translate(48.571 195.53)" fill-rule="evenodd">
+  <circle transform="translate(452.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" stroke="#000" stroke-linejoin="bevel"/>
+  <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#m)" filter="url(#iw)" stroke="url(#l)" stroke-width="20.8"/>
+  <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#dy)"/>
+  <ellipse transform="rotate(-4.471 1823.1 -5529.2)" cx="429.57" cy="377.43" rx="72.08" ry="44.548" enable-background="accumulate" fill="url(#dx)" filter="url(#iv)"/>
+  <ellipse transform="matrix(1.4358 -.07 .07 1.4358 235.18 -63.865)" cx="437.7" cy="391.22" rx="36.612" ry="22.627" enable-background="accumulate" fill="url(#dw)" filter="url(#iu)"/>
+  <g transform="translate(450.03 73.844)" enable-background="new" filter="url(#it)">
+   <circle cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#dv)"/>
+   <circle transform="translate(13.125 8.125)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#du)"/>
+   <circle transform="translate(32.946 7.5)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ej)"/>
+   <circle transform="translate(24.911 -10.268)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ei)"/>
+   <circle transform="translate(47.589 -.625)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#eh)"/>
+  </g>
+ </g>
+ <g fill="none" stroke="#000">
+  <path d="M944.771 678.46c.985 4.35 4.537 6.18 7.387 7.892 4.46 2.513 6.52 1.522 9.154-.758 1.602-1.921 10.683-4.698 15.594-7.07 4.33-1.46 8.904-5.36 13.385-8.335 3.395-1.627 5.347.355 7.829 1.01 2.944.717 4.411 2.172 6.06 3.536 2.397 1.175-.927 3.143 3.284 4.293 1.19.218 2.417.577 3.283-.505" enable-background="new"/>
+  <path d="M959.421 670.88c2.315-.032 3.178.643 5.493-.82 3.455-3.082 5.402-3.146 7.955-4.42 3.026-1.315 6.535 8.152 10.102 9.849 2.395-.822 1.289 1.794 1.452 2.651.057 2.647 2.807 3.679 4.356 5.43 3.316 2.256 7.375 6.296 11.112 5.303 6.445-2.93 10.28-1.281 16.29-7.386.703-1.182-.585-6.895 3.093-7.198 2.524.254 4.166.05 6.06.569 5.442 2.117 7.738 6.45 14.71 7.955 6.184.966 7.613 3.794 13.89 5.05M925.551 679.05c2.399-.794 6.106 4.192 8.173 7.046.593 2.68 1.154 5.486.758 12.122.785 2.417 2.68 3.03 4.798 3.283 3.117-.537 5.877-1.325 7.324-3.03 1.871-1.943 5.312 2.393 8.08 4.04 3.61 1.912 7.775 1.979 11.87 2.273 1.703-.231 2.37 4.515 3.283 8.08.384 4.379-.886 6.896-1.768 9.85-.294 2.496 2.988 3.53 6.313 4.545 3.183.742 6.545 1.662 9.092 1.768 5.142.875 8.088 2.69 12.122 4.04 2.239.817 3.26 2.243 4.545 3.536" enable-background="new"/>
+ </g>
+ <g fill-rule="evenodd">
+  <path transform="translate(324.57 331.53)" d="m332 187.7s57.5-25.5 57.5-28 5.5-52 5.5-52 91-48.5 91.5-50.5 86-62 86-62l-186 22-75.5 106z" clip-path="url(#jz)" enable-background="new" fill="#fff" filter="url(#jy)" opacity=".25"/>
+  <path d="m1745.9 918.08s-115.97 73.539-123.04 77.782c-7.071 4.243-230.52 137.18-230.52 137.18l4.243 39.598 216.37-100.41 117.38-101.82 15.556-52.326z" enable-background="accumulate" fill="#fff" opacity=".25"/>
+  <path transform="translate(324.57 331.53)" d="m528.92 556.85c-5.657-1.414-181.02 74.953-181.02 74.953l-33.941 181.02 51.095 193.95 257.2 67.681s206.48 152.74 212.13 148.49c5.657-4.243 168.29-193.75 168.29-193.75l-159.81-183.85-46.669-178.19-267.29-110.31z" clip-path="url(#jx)" enable-background="accumulate" filter="url(#eg)" opacity=".5"/>
+  <path d="m1146.2 809.42s22.62-6.507 35.743-5.873 30.642 1.939 43.709 12.186c13.067 10.248 25.068 27.14 34.112 58.37 9.045 31.23 1.698 99.252-6.176 143.35-7.874 44.095-28.265 106.11-45 140-16.735 33.887-49.798 77.495-60.57 89.876-11.363 13.062-56.205 36.426-79.43 42.267 5.303-10.607 48.9-50.589 35-60.714-14.02-10.212-45.76 45.982-84.293 29.033 21.382-13.132 41.779-51.186 34.04-66.594-7.84-15.61-30.704 48.758-93.535 37.013 30.052-27.527 55.407-70.904 41.263-82.98-14.415-12.307-60.462 54.293-60.462 54.293s-2.822-41.7 13.773-68.607c16.639-26.978 79.653-81.615 99.553-111.7 19.9-30.088 33.613-66.009 42.136-92.518s15.8-77.1 15.8-77.1" enable-background="new" fill="#0c0c0c"/>
+  <path transform="translate(324.57 331.53)" d="m770.75 609.18l-50.912 97.581-79.903 111.02 34.648 71.418 42.426 79.196 72.125-45.255 14.142-192.33 21.213-138.59-14.142-90.156-39.598 107.13z" clip-path="url(#jw)" enable-background="accumulate" fill="#fff" filter="url(#jv)" opacity=".25"/>
+  <path transform="translate(324.57 331.53)" d="m295 846.2l6.645-68.923s90.32 89.005 162.36 122.92 308 62 308 62l154-26-36 162-286 26-298-89-11-189z" clip-path="url(#ju)" enable-background="accumulate" filter="url(#eg)"/>
+  <path transform="translate(498.6 269.37)" d="m405.8 845.99l74.953 65.054 2.5 16.88 19.403 10.159 6.492 23.051 31.709-8.371 14.849 48.083c12.257 12.728 89.793-113.11 55.86 38.184l-60.81 16.264-89.203-94.693-62.825-53.8 7.07-60.811z" clip-path="url(#jt)" enable-background="new" fill="#fff" filter="url(#o)"/>
+  <path d="m1207.9 1113.9c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212"/>
+  <path transform="translate(498.6 269.37)" d="m1241.6 652.95s-64.722 54.337-145.66 98.995c-82.024 45.255-284.26 93.338-284.26 93.338s-15.101 21.052 45.255 28.284 224.08-53.301 278.6-96.167 120.21-111.72 120.21-111.72l-14.142-12.728z" clip-path="url(#js)" enable-background="accumulate" fill="url(#jr)" filter="url(#jq)" opacity=".5"/>
+ </g>
+ <g transform="translate(498.6 269.37)" clip-path="url(#jp)" enable-background="new">
+  <g filter="url(#em)">
+   <g transform="translate(-174.03 62.156)" filter="url(#i)">
+    <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+    <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
+   </g>
+  </g>
+  <g transform="translate(-174.03 62.156)" enable-background="new" filter="url(#i)" opacity=".18">
+   <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+   <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
+  </g>
+ </g>
+ <path transform="translate(498.6 269.37)" d="M1264.2 605c-4.491.733-8.157 3.455-11.938 6.406-10.081 7.87-28.17 34.425-48.031 50.47-39.867 32.202-104 69.976-152.56 91.093-48.614 21.137-130.54 45.818-174.31 57.5-43.398 11.582-115.04 25.131-168.25 26.531l-4.562.125-2 4.125-92.844 192.12-6.5 13.47 14.656-2.845s87.27-16.65 132.34-31.28c44.725-14.518 115.79-45.668 173.03-72.876 57.603-27.38 166.94-91.98 214.28-129.47 46.36-36.71 77.805-64.717 99.938-90.25 10.9-12.576 22.745-27.53 31.03-42.75 8.287-15.219 19.16-44.218 13.688-58.844-1.218-3.254-2.552-6.06-4.594-8.5s-8.475-1.572-8.563-5.03c-.21-8.266-3.315-.245-4.812 0zm2.156 15.219c.415.586 1.031 1.558 1.782 3.563 2.896 7.742-1.441 31.899-8.813 45.438s-22.638 28.924-33.188 41.094c-21.075 24.314-51.904 51.862-97.938 88.312-45.05 35.672-155.46 101.09-211.41 127.69-56.892 27.042-128.1 58.118-171.25 72.125-36.365 11.803-95.845 23.834-115.72
+27.78l84.281-174.47c54.707-2.049 123.79-15.215 167.12-26.78 44.334-11.832 126.08-36.336 176.41-58.22 50.112-21.788 112.53-61.167 154.03-94.687 20.646-16.677 41.745-42.546 49.813-48.844 2.437-1.903 4.08-2.636 4.875-3z" clip-path="url(#jo)" enable-background="accumulate" fill="#050505" fill-rule="evenodd" filter="url(#jn)" opacity=".833"/>
+ <g transform="rotate(6.561 -6814.9 734.74)" enable-background="new" fill-rule="evenodd" mask="url(#jm)">
+  <path d="M1111.48-285.971l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.312-.486.21-1.737.585-4.093 1.47-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.593c-1.894.42-1.675.642-2.875.875-1.296.252-1.721-.009-5.437.782-3.49.742-8.895 1.93-10.156 2.687-1.584-.18-3.868-.322-5.844-.031-3.04.447-4.916.673-6.844.906-.655.08-1.04.2-1.343.281-.427.132-.686.26-1.375.344-1.312.16-1.763-.157-5.532.281-3.554.413-9.005 1.273-10.25 1.938-1.599-.297-3.857-.534-5.843-.344-3.06.293-4.972.484-6.907.656-1.934.173-1.688.423-2.906.532-1.316.117-1.76-.164-5.531.25-3.542.388-9.008 1.209-10.281 1.875-1.6-.295-3.887-.507-5.875-.313-3.058.3-4.941.48-6.875.656-.658.06-1.04.179-1.344.25-.428.12-.683.218-1.375.282-1.316.12-1.76-.195-5.531.218-3.556.39-9.006 1.24-10.25
+1.907-1.599-.295-3.86-.524-5.844-.313-3.056.325-4.974.526-6.906.719s-1.69.44-2.906.562c-1.315.132-1.763-.164-5.532.282-3.538.418-8.977 1.292-10.25 1.968-1.597-.28-3.86-.42-5.843-.187-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.127-.685.267-1.375.344-1.314.146-1.768-.174-5.531.312-3.55.46-8.979 1.42-10.22 2.125-1.592-.244-3.833-.381-5.812-.125-3.047.395-4.95.649-6.875.907-1.924.257-1.726.493-2.937.656-1.31.176-1.748-.105-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.255-5.813.094-3.026.536-4.899.861-6.812 1.187-.65.111-1.014.271-1.313.375-.42.165-.663.332-1.344.469-1.294.262-1.727-.006-5.437.813-3.499.771-8.846 2.382-10.062 3.218-1.563-.077-3.758.086-5.688.594-2.972.783-4.817 1.232-6.687 1.75s-1.667.767-2.844 1.094c-1.272.353-1.697.107-5.344 1.187-3.424 1.015-8.65 2.934-9.875 3.844-1.539.013-3.72.272-5.625.875-2.93.928-4.75 1.459-6.594
+2.063-.626.205-.991.392-1.28.53-.408.215-.654.41-1.313.626-1.255.411-1.686.189-5.281 1.437-3.39 1.178-8.595 3.214-9.782 4.157-1.524.06-3.65.395-5.53 1.062-2.898 1.028-4.7 1.676-6.532 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.469-1.507.108-3.635.499-5.5 1.219a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.593v.031l-8 3.188-12.476 3.492 7.93 19.278c-.592 1.973 12.545-4.739 12.545-4.739.227-.144.45-.272.72-.375 1.08-.41 2.17-.215 6-1.687 3.828-1.472 5.223-2.005 5.905-2.406.68-.4 1.612-.88 2.22-1.531 1.826-.138 3.57-.494 4.937-1 2.968-1.1 4.875-1.807 6.78-2.47 1.907-.662 2.355-1.414 3.407-1.78 1.092-.38 2.195-.166 6.063-1.532 3.867-1.366 5.283-1.827 5.968-2.218.702-.4 1.701-.933 2.313-1.594 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.926-1.622 6.844-2.25 1.538-.504 2.174-1.047 2.906-1.438.23-.134.476-.253.75-.343 1.098-.36
+2.181-.082 6.094-1.313 3.912-1.231 5.366-1.673 6.062-2.031.694-.357 1.63-.793 2.25-1.406 1.866-.023 3.636-.267 5.032-.688 3.03-.913 4.992-1.43 6.937-1.969 1.945-.538 2.426-1.264 3.5-1.562 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.734-.33 1.813-.754 2.437-1.375 1.998.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.245-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.134-.23 2.305.209 6.344-.5 4.04-.71 5.5-.927 6.219-1.188.716-.26 1.704-.567 2.344-1.093 1.924.239 3.748.224 5.187 0 3.127-.488 5.155-.701 7.156-.97 2.002-.267 2.49-.944 3.594-1.093 1.147-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.281-.937.737-.247 1.798-.586 2.438-1.125 2.05.335 3.973.398 5.5.218 3.142-.368 5.18-.559 7.187-.78 1.611-.179 2.265-.609 3.031-.845.241-.085.495-.155.782-.187 1.15-.128 2.301.347 6.375-.125s5.559-.61 6.28-.844c.72-.232 1.701-.473 2.345-.969 1.936.334 3.77.405
+5.219.25 3.146-.334 5.177-.518 7.187-.718 2.01-.2 2.484-.827 3.594-.938 1.15-.115 2.296.365 6.375-.062s5.589-.562 6.312-.782c.74-.223 1.796-.513 2.438-1.03 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.03-.781.242-.081.494-.13.782-.157 1.152-.105 2.293.393 6.375 0s5.589-.53 6.312-.75c.721-.218 1.7-.447 2.344-.937 1.938.35 3.769.454 5.219.312 3.149-.308 5.176-.473 7.187-.656 2.012-.183 2.515-.838 3.625-.937 1.153-.104 2.293.384 6.375 0 4.083-.385 5.59-.501 6.313-.72.74-.222 1.796-.514 2.437-1.03 2.058.401 4.003.503 5.532.343 3.146-.328 5.177-.522 7.187-.718 1.613-.158 2.266-.632 3.031-.875.241-.088.464-.122.75-.157 1.149-.14 2.317.34 6.375-.25 4.059-.59 5.562-.777 6.282-1.03.716-.254 1.674-.559 2.312-1.095 1.92.212 3.72.152 5.156-.093 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.563-1.281 1.128-.25 2.27.116 6.25-.875s5.43-1.42
+6.125-1.781c.722-.376 1.761-.87 2.375-1.531 1.963-.012 3.793-.292 5.218-.844 2.952-1.145 4.874-1.87 6.688-2.75 1.456-.707 2.32-1.702 2.531-2 .212-.298.1-.729.125-.75.043-.035.34-.094.5-.438.86-1.847 2.323-5.627 2.438-6.312.113-.682.168-1.353.218-1.75.03-.23-.147-.88-.125-.938.031-.082.289-.25.344-.5.266-1.198.09-2.207-.125-3.625-.214-1.417-.972-4.614-1.625-5.469-.659-.861-1.225-1.01-1.75-1z" enable-background="new" fill="#bcb786"/>
+  <g clip-path="url(#jl)">
+   <path d="M1107.4-284.05c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
+1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
+2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
+2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
+3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
+1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
+3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#jk)"/>
+   <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#jj)"/>
+   <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#ji)"/>
+   <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#jh)"/>
+   <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25 1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1
+.17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437 1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0
+1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956 5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218
+1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584 5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969
+2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23
+2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219 1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474
+7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
+2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.442 3.94 1.579 5.39.19 2.86-.088 3.468c-.278.609-.944.429-1.237.495.531.186.89.213.953 1.057.058.814-.134 1.64-.52 2.806-.391 1.18-1.845 4.35-2.286 4.599-.452.255-.952.182-1.288.05z" enable-background="new" filter="url(#jg)"/>
+   <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#jf)"/>
+   <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#ib)"/>
+   <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#ia)"/>
+   <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#hz)"/>
+   <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#hy)"/>
+   <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#hx)"/>
+   <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#hw)"/>
+   <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#hv)"/>
+   <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#hu)"/>
+   <g fill="#fff" filter="url(#ht)">
+    <path d="M744.94-212.12s7.222-3.223 9.063-3.5 3.352-.003 6 .563c2.647.565 8.735 2.215 11.188 3.374s5.312 3.563 5.312 3.563-7.146-2.78-10.188-3.563-7.645-2.083-10.375-2.312-11 1.875-11 1.875z"/>
+    <path d="m735.47-206.95s3.66-2.223 5.5-2.5 3.665 0.247 6.313 0.813 8.735 2.215 11.188 3.375 6.562 2.125 6.562 2.125-8.396-1.343-11.438-2.125-7.957-2.334-10.688-2.563-7.438 0.875-7.438 0.875zm24.38-10.66s8.544-3.299 10.398-3.458c1.854-0.16 3.642 0.48 6.248 1.212s8.577 2.766 10.95 4.08 6.414 2.537 6.414 2.537-8.294-1.873-11.279-2.848c-2.985-0.974-7.792-2.834-10.503-3.236s-12.228 1.713-12.228 1.713zm15.35-5.62s7.771-2.782 9.628-2.904c1.857-0.12 3.631 0.555 6.222 1.341 2.59 0.787 8.519 2.942 10.864 4.304 2.346 1.362 6.36 2.67 6.36 2.67s-8.253-2.045-11.217-3.08c-2.965-1.035-7.733-2.995-10.434-3.452-2.702-0.458-11.422 1.121-11.422 1.121zm14.44-4.72s8.683-3.52 10.542-3.605 3.62 0.624 6.195 1.46c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.408 6.307 2.793 6.307 2.793s-8.212-2.204-11.156-3.297-7.673-3.144-10.365-3.654-12.3 1.789-12.3 1.789zm14.86-5.38s7.808-2.583 9.666-2.668c1.86-0.085 3.62
+0.625 6.195 1.461 2.575 0.837 8.46 3.107 10.78 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.213-2.204-11.156-3.296-7.673-3.144-10.365-3.654-11.426 0.85-11.426 0.85zm15.06-4.25s8.558-2.583 10.417-2.668 3.62 0.625 6.195 1.461c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.212-2.204-11.156-3.296-7.673-3.144-10.365-3.654-12.176 0.85-12.176 0.85zm16.67-5.02s6.967-1.987 8.828-1.968c1.86 0.02 3.579 0.827 6.102 1.807 2.524 0.98 8.272 3.578 10.508 5.113 2.236 1.536 6.14 3.143 6.14 3.143s-8.075-2.662-10.952-3.919c-2.878-1.256-7.484-3.57-10.143-4.231-2.66-0.66-10.482 0.055-10.482 0.055zm14.5-3.4s7.688-2.028 9.548-1.968 3.56 0.902 6.063 1.936c2.502 1.033 8.194 3.752 10.397 5.335 2.203 1.582 6.072 3.272 6.072 3.272s-8.017-2.833-10.868-4.15c-2.85-1.318-7.407-3.73-10.05-4.446s-11.162 0.021-11.162 0.021zm14.09-3.21s8.17-1.97 10.027-1.854c1.857 0.115 3.532 1.01 6.002
+2.118s8.077 3.997 10.23 5.645 5.972 3.454 5.972 3.454-7.928-3.074-10.738-4.476-7.291-3.95-9.913-4.746c-2.621-0.796-11.58-0.141-11.58-0.141zm16.56-2.39s8.085-1.908 9.938-1.737c1.853 0.172 3.5 1.117 5.935 2.3 2.436 1.182 7.952 4.24 10.055 5.953s5.864 3.633 5.864 3.633-7.832-3.312-10.597-4.8-7.168-4.169-9.764-5.044c-2.597-0.876-11.431-0.305-11.431-0.305zm15.2-2.75s7.642-1.428 9.495-1.265c1.854 0.162 3.505 1.1 5.946 2.27s7.973 4.203 10.084 5.905c2.112 1.703 5.881 3.605 5.881 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.998-0.77-10.998-0.77zm14.87-1.64s8.642-1.553 10.495-1.39c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.998-0.644-11.998-0.644zm16.25-2.31s7.642-0.865 9.495-0.703c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203 10.084
+5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.862-10.998-1.331-10.998-1.331zm15.13-1.19s8.58-1.49 10.433-1.328c1.854 0.163 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.906c2.111 1.702 5.88 3.605 5.88 3.605s-7.846-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.862-11.935-0.706-11.935-0.706zm16.25-2.06s7.83-0.803 9.683-0.64c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.185-1.394-11.185-1.394zm15.37-1.25s8.392-1.178 10.245-1.015c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-11.748-1.02-11.748-1.02zm16.19-2.06s6.892-0.99 8.745-0.828c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203
+10.084 5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749-7.188-4.135-9.788-4.998c-2.6-0.862-10.248-1.206-10.248-1.206zm17.16-0.94s6.83-1.178 8.683-1.015c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.185-1.02-10.185-1.02zm16.1-2s6.08-0.428 7.933-0.265c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.435-1.77-9.435-1.77zm15.8-1.37s6.454-0.678 8.308-0.515c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.81-1.52-9.81-1.52zm15.6-1.86s5.498-0.91 7.358-0.853c1.86 0.056 3.562 0.896 6.066 1.925
+2.504 1.03 8.2 3.739 10.406 5.318 2.205 1.578 6.078 3.261 6.078 3.261s-8.022-2.819-10.875-4.131c-2.853-1.313-7.413-3.716-10.06-4.429-2.645-0.712-8.973-1.091-8.973-1.091zm17.4-2.46s4.547-1.156 6.408-1.186c1.86-0.03 3.6 0.73 6.149 1.642 2.55 0.912 8.365 3.354 10.64 4.829 2.277 1.474 6.224 2.976 6.224 2.976s-8.145-2.444-11.055-3.623c-2.91-1.178-7.578-3.368-10.253-3.957-2.676-0.588-8.113-0.68-8.113-0.68zm14.5-3.03s5.96-1.774 7.82-1.83c1.86-0.057 3.61 0.68 6.172 1.555 2.562 0.876 2.522 0.857 5.333 1.49 2.797 0.63 7.077 1.513 7.077 1.513s-3.616-0.016-6.792-0.466c-3.116-0.441-7.375-1.698-10.058-2.249-2.684-0.55-9.552-0.013-9.552-0.013z" enable-background="new"/>
+    <path d="M1099.2-279.93c.161.269 11.208-4.6 12.188-4.688.98-.087 2 3.125 2 3.125s-.775-1.504-2.875-1.062-11.301 2.671-11.312 2.625z"/>
+   </g>
+   <path d="M1107.5-284.09c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
+1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
+2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
+2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
+3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
+1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
+3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#hs)" opacity=".25"/>
+   <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#hr)" opacity=".25"/>
+   <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#hq)" opacity=".25"/>
+   <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#hp)" opacity=".25"/>
+   <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25 1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1
+.17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437 1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0
+1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956 5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218
+1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584 5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969
+2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23
+2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219 1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474
+7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
+2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.221 3.85 1.358 5.301.19 2.86-.088 3.469c-.278.608-.723.517-1.016.583.531.186.67.125.732.969.058.813-.134 1.64-.52 2.806-.392 1.18-1.846 4.35-2.286 4.598-.452.256-.731.27-1.067.14z" enable-background="new" filter="url(#ho)" opacity=".25"/>
+   <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#hn)" opacity=".25"/>
+   <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#hm)" opacity=".25"/>
+   <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#hl)" opacity=".25"/>
+   <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#hk)" opacity=".25"/>
+   <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#hj)" opacity=".25"/>
+   <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#hi)" opacity=".25"/>
+   <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#hh)" opacity=".25"/>
+   <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#hg)" opacity=".25"/>
+   <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#hf)" opacity=".25"/>
+  </g>
+ </g>
+ <path d="M912.45 671.2c1.642-3.218 3.518-5.735 4.861-9.849.8-3.658 3.312-2.03 7.26-8.397 1.403-2.24 5.477.391 8.966-2.399 1.27-.803 2.885-.404 4.483-.063 3.765 1.319 5.825 3.704 8.333 5.808 6.14 5.97 20.534 7.944 23.486 6.314 1.434-2.905 7.882-5.41 12.374-11.112.749-1.123 11.73-8.745 14.647-6.566" enable-background="new" fill="none" stroke="#000"/>
+ <path d="M937.07 660.78c7.363-3.233 13.811-8.908 20.708-13.385 3.31-1.97 6.87 3.216 10.796 3.599 2.298-.218 3.713 1.202 5.682 1.641 5.157 1.318 2.398 3.865 9.975 6.44 6.156 1.72 8.908-6.799 14.9-7.324 4.878-.503 8.1-.316 11.617-.252 3.927.139 4.079-3.498 6.061-5.304 2.98-2.805 7.156-1.85 10.145-4.74 1.018-1.385 1.955-3.011 2.735-5.109.882-2 3.04.306 4.798 1.263" enable-background="new" fill="none" stroke="#000"/>
+ <g fill-rule="evenodd">
+  <path transform="translate(48.571 195.53)" d="m403.28 1056.3l56.569-42.426 72.125 14.142-46.669 52.326-53.74 7.071-28.284-31.113z" enable-background="accumulate" filter="url(#he)" opacity=".25"/>
+  <path d="m590.84 1256.1c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.977-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.416-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469"/>
+  <path transform="matrix(-.90453 .25066 .25066 .90453 1043.9 219.06)" d="M719.5 738.7l18.312 15.432 44.411-15.388L805.5 713.2l11.464 19.221 30.672 12.784 25.097 5.728L892 723.2l16.023 23.826L947 752.2l10.245-6.198L964 754.7l25.5 11 2-40.5-35.551-14.538-32.493-21.527-40.452-11.466-21.307-15.533L840 685.2l-84.971-46.583-33.03 38.083-2.5 62z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#o)"/>
+  <path transform="matrix(-.90453 .25066 .25066 .90453 870.86 206.47)" d="M584 696.5l-6.563 17.156s-7.811 20.365-15.688 43.656c-3.938 11.646-7.883 24.041-10.938 35.125s-5.335 20.38-5.5 28.281c-.398 19.162 5.747 34.888 8.938 41.75-.772 3.555-1.991 9.454-3.344 18.094-1.92 12.268-3.718 27.154-2.375 39.875 1.382 13.088 6.812 28.188 12.594 43.031s12.054 29.227 15.22 38.031c6.631 18.452 9.992 31.576 11.311 48.5.582 7.456-.242 20.336-1.25 33.375s-2.186 26.301-1.687 36.969c.989 21.14 9.328 46.835 33.375 57.937 22.775 10.515 55.327 11.702 83.438-3.437 16.16-8.704 30.076-27.098 43.375-46.906s24.969-41.053 31.938-54.906c15.353-30.521 39.394-115.46 45.625-152.72 3.018-18.047 3.921-29.066 2.625-38.031-.979-6.766-3.828-12.147-6.875-16.22 2.042-27.507-.732-51.368 11.969-79.405l10.562-23.281-23.812 9.312c-17.49 6.838-28.902 19.045-36.594 32.062-.323.546-.563 1.108-.875 1.656.222-22.515 4.408-37.638
+6.594-58.688l1.968-19-17.03 8.656c-30.595 15.556-45.696 48.193-49.72 90.22-4.245-.626-8.831-1.02-13.812-.844-.291-39.18-.396-67.037 8.594-99.375l5.594-20.125-19.438 7.656c-30.91 12.204-47.86 41.931-56.625 68.375-4.383 13.222-6.746 25.801-7.594 35.938a92.19 92.19 0 0 0-.312 7.719c-3.242-.037-6.42.136-10.062.5.041-39.005-3.485-79.754-32.281-116.5L584 696.498zm5.813 43.812c16.807 30.644 17.475 63.967 16.938 99.75l-.22 15.062 12.036-6.54c8.662-3.132 19.56-.227 31.934-.835l14.675 9.357-6.331-25.794c-.09-.23-.22-.417-.25-.72-.2-2.039-.222-5.472.125-9.624.694-8.304 2.79-19.585 6.625-31.156 5.155-15.553 13.488-31.192 25.125-42.531-4.684 28.638-3.216 60.259-3.012 95.805l-2.766 13.262 15.496-7.598c9.03-2.758 17.19-.35 29.281 1.094l13.246 9.444L741.094 840c1.448-30.972 8.222-53.678 20.719-68.875-2.987 19.779-5.43 41.785.313 78.344l1.065 6.373-2.938 11.517 10.617-8.168 9.19 10.222-1.549-10.464
+3.427-6.95c5.7-13.21 10.173-26.212 16.344-36.655.96-1.624 2.031-3.065 3.062-4.563-3.68 21.155-2.427 40.208-4.093 57.781l-4.68 7.807 7.398.225c3.22 3.483 3.868 3.85 4.563 8.656s.318 14.4-2.563 31.625c-5.568 33.288-31.846 77.84-43.74 101.49-6.605 13.13-18.528 57.486-31.123 76.246s-28.53 39.767-37.172 44.42c-21.49 11.575-44.556 25.507-60.619 18.09-14.375-6.636-23.04-21.192-23.814-37.742-.383-8.188.613-21.31 1.625-34.406 1.013-13.097 11.29-22.571 15.423-36.563 5.373-18.181-1.447-36.594-12.5-53.937-6.486-10.178-23.977-24.258-29.548-38.562s-10.368-29.003-11.28-37.656c-.927-8.771.422-23.025 2.218-34.5 1.796-11.475 3.844-20.281 3.844-20.281l9.423-3.615-10.485-3.885s-8.5-15.31-8.094-34.812c.071-3.423 1.836-12.728 4.719-23.188s6.764-22.553 10.625-33.97c3.044-9.002 5.78-16.602 8.344-23.687z" clip-path="url(#am)" enable-background="new" filter="url(#ds)" opacity=".588"/>
+  <g transform="translate(324.57 331.53)" clip-path="url(#is)" enable-background="new" fill="#fff">
+   <path transform="matrix(-.90453 .25066 .25066 .90453 -52.2 74.097)" d="m-15.668 843.49l-49.497-15.556-26.87 52.326 41.012 45.255 49.497-38.184z" enable-background="accumulate" filter="url(#dr)"/>
+   <path transform="matrix(-.90453 .25066 .25066 .90453 -46.928 75.511)" d="m118.71 859.93l-55.154-46.669-43.841 36.77 33.941 53.74-13.597 85.462-39.445 28.292-41.012 11.314-2.828 46.669 56.569 25.456 18.944-69.65 23.457-58.857 46.348-72.615 16.62-39.912z" enable-background="accumulate" filter="url(#dq)"/>
+  </g>
+  <path transform="matrix(-.90453 .25066 .25066 .90453 277.64 407.04)" d="m-70.822 932.58l60.811-26.87 100.41 31.113-63.64 31.113-82.024-16.971-15.556-18.385z" enable-background="accumulate" filter="url(#cy)" opacity=".25"/>
+  <path transform="matrix(-.90453 .25066 .25066 .90453 870.86 206.47)" d="M583.06 715.75c-12.106 34.45-26.714 68.533-31.75 104.84-.832 14.929 4.59 29.159 8.844 43.062-5.916 27.201-10.137 56.9 1.156 83.125 13.517 38.161 35.001 75.682 32.423 117.47-.948 29.294-9.014 60.994 5.39 88.282 10.199 19.335 33.14 27.312 53.968 27.668 27.862 1.174 56.463-11.622 72-35.261 22.596-29.372 41.802-61.497 55.24-96.06 16.89-45.506 29.672-92.561 37.934-140.4 1.824-12.941 3.1-27.47-4.58-38.823-3.43-7.336.043-15.56-.684-23.31.674-24.995 4.013-50.664 16.653-72.596-17.733 6.445-35.073 16.56-44.003 33.864-3.935 6.71-7.605 13.574-11.372 20.386-3.55-30.014 3.72-59.648 6.781-89.281-20.166 9.055-36.877 25.655-44.175 46.682-6.304 15.58-8.802 32.317-10.263 49.037-8.253-1.52-16.684-2.102-25.062-1.5-.963-38.698-.467-79.407 10.97-115.91-18.682 6.218-35.167 18.736-45.629 35.387-13.853 20.88-21.26 45.754-23.059 70.613.586
+4.325-.06 11.84-6.343 9.875-5.332.018-10.63.679-15.938 1.094 1.147-39.381-3.342-81.628-27.062-114.22-3.061-3.637-5.637-7.685-8.625-11.344l-2.813 7.312zm7.75 13.844c18.565 29.296 22.482 64.82 22.125 98.875.204 5.175-.517 11.829.125 16.062 12.319-6.103 26.739-2.44 39.781-2.187 2.317 1.223 3.192 1.652 1.906-1.407-4.164-13.953-1.848-28.613 1.805-42.408 6.367-26.29 20.628-51.088 42.82-67.03-8.617 37.237-5.716 76.562-6.094 113.97 12.253-6.91 27.28-3.446 40.031-.25 3.393 3.535 2.29-.73 2.188-3.812-.483-21.371 4.131-43.07 13.688-62.156 5.963-10.687 14.243-19.804 22.438-28.875-7.872 33.838-9.203 69.336-2.719 103.5 1.725-1.411 4.607-.454 5.656-.375 9.684-21.237 16.351-45.381 34.89-60.742 1.874-.371-1.448 8.525-1.484 11.898-3.535 21.846-7.175 44.142-8.784 66.219-8.784 2.342 2.849 2.323 3.469 4.062 7.923 10.566 4.663 24.405 3.632 36.353-7.064 45.034-22.142 87.362-35.954 130.68-12.075 32.95-27.374
+58.852-47.888 87.202-10.953 13.551-23.245 27.851-40.844 32.5-20.156 6.242-44.207 10.877-62.6.046-17.29-12.34-21.024-35.709-19.262-55.686.048-15.826 4.938-28.512 4.41-43.492-.538-15.263-2.291-30.565-6.542-46.866-4.252-16.302-9.044-24.918-16.12-41.573-7.24-17.045-15.07-36.749-18.204-56.288-1.75-18.627 2.891-37.123 5.78-55.25 3.297-2.837-1.597-5.196-2.312-8.187-7.6-17.015-8.407-36.775-2.742-54.56 7.13-25.072 15.761-49.632 24.68-74.128l2.125 3.906z" clip-path="url(#cj)" enable-background="new" filter="url(#ir)" opacity=".588"/>
+  <path transform="matrix(-.90453 .25066 .25066 .90453 1043.9 219.06)" d="m735.06 733.04l2.755 21.089 44.411-15.388 4.851-22.39-3.936-22.052-22.452-36.593-8.28 30.305-17.35 45.029z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#bz)"/>
+  <path transform="matrix(-.90453 .25066 .25066 .90453 1043.9 219.06)" d="m831.81 730.29l15.822 14.905 20.855 2.9-1.59-39.926 8.325-30.508-7.165-6.341-21.697 20.942-14.55 38.028z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#by)"/>
+ </g>
+ <g transform="translate(324.57 331.53)" clip-path="url(#iq)" enable-background="new" filter="url(#ip)">
+  <path d="M36.494 811.806l-14.799 11.372-17.47-31.162 14.663.65 17.606 19.14z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+  <path d="M-55 757.2h182v177H-55z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g transform="translate(324.57 331.53)" clip-path="url(#io)" enable-background="new" filter="url(#in)">
+  <path d="m83.111 790.72l-28.201 12.855-5.658-21.687-13.943-25.046 6.325-6.88 26.384 18.51 15.094 22.249z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+  <path d="M-22 696.2h165v176H-22z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g fill-rule="evenodd">
+  <path d="m1084.8 1267.3c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656 0.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.973-97.309 13.624-27.084 38.761-114.5 44.661-149.77s2.551-41.3-4.617-49.055c2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933 0.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-0.714-0.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.053 112.78-10.883 0.535-21.371-1.297-32.857 2.857 0.638-42.57-0.26-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57-0.47 22.65 9.452 40.166 9.452 40.166s-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.266 78.658z" enable-background="new" fill="#ada469"/>
+  <path transform="translate(324.57 331.53)" d="M719.5 738.7l18.312 15.432 44.411-15.388L805.5 713.2l11.464 19.221 30.672 12.784 25.097 5.728L892 723.2l16.023 23.826L947 752.2l10.245-6.198L964 754.7l25.5 11 2-40.5-35.551-14.538-32.493-21.527-40.452-11.466-21.307-15.533L840 685.2l-84.971-46.583-33.03 38.083-2.5 62z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#o)"/>
+  <path transform="translate(498.6 269.37)" d="M584 696.5l-6.563 17.156s-7.811 20.365-15.688 43.656c-3.938 11.646-7.883 24.041-10.938 35.125s-5.335 20.38-5.5 28.281c-.398 19.162 5.747 34.888 8.938 41.75-.772 3.555-1.991 9.454-3.344 18.094-1.92 12.268-3.718 27.154-2.375 39.875 1.382 13.088 6.812 28.188 12.594 43.031s12.054 29.227 15.22 38.031c6.631 18.452 9.992 31.576 11.311 48.5.582 7.456-.242 20.336-1.25 33.375s-2.186 26.301-1.687 36.969c.989 21.14 9.328 46.835 33.375 57.937 22.775 10.515 55.327 11.702 83.438-3.437 16.16-8.704 30.076-27.098 43.375-46.906s24.969-41.053 31.938-54.906c15.353-30.521 39.394-115.46 45.625-152.72 3.018-18.047 3.921-29.066 2.625-38.031-.979-6.766-3.828-12.147-6.875-16.22 2.042-27.507-.732-51.368 11.969-79.405l10.562-23.281-23.812 9.312c-17.49 6.838-28.902 19.045-36.594 32.062-.323.546-.563 1.108-.875 1.656.222-22.515 4.408-37.638 6.594-58.688l1.968-19-17.03
+8.656c-30.595 15.556-45.696 48.193-49.72 90.22-4.245-.626-8.831-1.02-13.812-.844-.291-39.18-.396-67.037 8.594-99.375l5.594-20.125-19.438 7.656c-30.91 12.204-47.86 41.931-56.625 68.375-4.383 13.222-6.746 25.801-7.594 35.938a92.19 92.19 0 0 0-.312 7.719c-3.242-.037-6.42.136-10.062.5.041-39.005-3.485-79.754-32.281-116.5L584 696.498zm5.813 43.812c16.807 30.644 17.475 63.967 16.938 99.75l-.22 15.062 12.036-6.54c8.662-3.132 19.56-.227 31.934-.835l14.675 9.357-6.331-25.794c-.09-.23-.22-.417-.25-.72-.2-2.039-.222-5.472.125-9.624.694-8.304 2.79-19.585 6.625-31.156 5.155-15.553 13.488-31.192 25.125-42.531-4.684 28.638-3.216 60.259-3.012 95.805l-2.766 13.262 15.496-7.598c9.03-2.758 17.19-.35 29.281 1.094l13.246 9.444L741.094 840c1.448-30.972 8.222-53.678 20.719-68.875-2.987 19.779-5.43 41.785.313 78.344l1.065 6.373-2.938 11.517 10.617-8.168 9.19 10.222-1.549-10.464 3.427-6.95c5.7-13.21
+10.173-26.212 16.344-36.655.96-1.624 2.031-3.065 3.062-4.563-3.68 21.155-2.427 40.208-4.093 57.781l-4.68 7.807 7.398.225c3.22 3.483 3.868 3.85 4.563 8.656s.318 14.4-2.563 31.625c-5.568 33.288-31.793 123.17-43.688 146.81-6.605 13.13-18.03 33.896-30.625 52.656s-27.359 35.534-36 40.187c-21.49 11.574-48.78 10.26-64.844 2.844-14.375-6.637-20.538-23.45-21.312-40-.383-8.188.613-21.31 1.625-34.406 1.013-13.097 11.29-22.571 15.423-36.563 5.373-18.181-1.447-36.594-12.5-53.937-6.486-10.178-23.977-24.258-29.548-38.562s-10.368-29.003-11.28-37.656c-.927-8.771.422-23.025 2.218-34.5 1.796-11.475 3.844-20.281 3.844-20.281l9.423-3.616-10.485-3.884s-8.5-15.31-8.094-34.812c.071-3.424 1.836-12.728 4.719-23.188s6.764-22.553 10.625-33.97c3.044-9.002 5.78-16.602 8.344-23.687z" clip-path="url(#am)" enable-background="new" filter="url(#ds)" opacity=".588"/>
+  <g transform="translate(324.57 331.53)" clip-path="url(#im)" fill="#fff">
+   <path d="m824.49 818.48l-49.497-15.556-26.87 52.326 41.012 45.255 49.497-38.184z" enable-background="accumulate" filter="url(#dr)"/>
+   <path d="m964.49 855.25l-55.154-46.669-43.841 36.77 33.941 53.74 7.071 66.468-50.912 35.355-41.012 11.314-2.828 46.669 56.569 25.456 63.64-76.368 24.042-94.752 8.485-57.983z" enable-background="accumulate" filter="url(#dq)"/>
+  </g>
+  <path transform="translate(48.571 195.53)" d="m1045.3 1043.6l60.811-26.87 100.41 31.113-63.64 31.113-82.024-16.971-15.556-18.385z" enable-background="accumulate" filter="url(#cy)" opacity=".25"/>
+  <path transform="translate(498.6 269.37)" d="M583.06 715.75c-12.106 34.45-26.714 68.533-31.75 104.84-.832 14.929 4.59 29.159 8.844 43.062-5.916 27.201-10.137 56.9 1.156 83.125 13.517 38.161 35.001 75.682 32.423 117.47-.948 29.294-9.014 60.994 5.39 88.282 10.199 19.335 33.14 27.312 53.968 27.668 27.862 1.174 56.463-11.622 72-35.261 22.596-29.372 41.802-61.497 55.24-96.06 16.89-45.506 29.672-92.561 37.934-140.4 1.824-12.941 3.1-27.47-4.58-38.823-3.43-7.336.043-15.56-.684-23.31.674-24.995 4.013-50.664 16.653-72.596-17.733 6.445-35.073 16.56-44.003 33.864-3.935 6.71-7.605 13.574-11.372 20.386-3.55-30.014 3.72-59.648 6.781-89.281-20.166 9.055-36.877 25.655-44.175 46.682-6.304 15.58-8.802 32.317-10.263 49.037-8.253-1.52-16.684-2.102-25.062-1.5-.963-38.698-.467-79.407 10.97-115.91-18.682 6.218-35.167 18.736-45.629 35.387-13.853 20.88-21.26 45.754-23.059 70.613.586 4.325-.06 11.84-6.343
+9.875-5.332.018-10.63.679-15.938 1.094 1.147-39.381-3.342-81.628-27.062-114.22-3.061-3.637-5.637-7.685-8.625-11.344l-2.813 7.312zm7.75 13.844c18.565 29.296 22.482 64.82 22.125 98.875.204 5.175-.517 11.829.125 16.062 12.319-6.103 26.739-2.44 39.781-2.187 2.317 1.223 3.192 1.652 1.906-1.407-4.164-13.953-1.848-28.613 1.805-42.408 6.367-26.29 20.628-51.088 42.82-67.03-8.617 37.237-5.716 76.562-6.094 113.97 12.253-6.91 27.28-3.446 40.031-.25 3.393 3.535 2.29-.73 2.188-3.812-.483-21.371 4.131-43.07 13.688-62.156 5.963-10.687 14.243-19.804 22.438-28.875-7.872 33.838-9.203 69.336-2.719 103.5 1.725-1.411 4.607-.454 5.656-.375 9.684-21.237 16.351-45.381 34.89-60.742 1.874-.371-1.448 8.525-1.484 11.898-3.535 21.846-3.297 44.173-4.906 66.25-1.312 1.377 2.849 2.323 3.469 4.062 7.923 10.566 3.123 24.831 2.092 36.78-7.064 45.034-21.766 88.38-35.577 131.7-12.075 32.95-30.72 63.08-51.234 91.43-10.953
+13.55-23.245 27.85-40.844 32.5-20.156 6.24-43.576 5.174-61.97-5.657-17.29-12.34-21.023-35.709-19.261-55.686.048-15.826 2.372-27.8 7.917-42.805s2.471-31.332-1.78-47.633-12.18-26.26-21.822-42.204-17.637-36.037-20.772-55.577c-1.75-18.627 2.892-37.123 5.781-55.25 3.296-2.837-1.598-5.196-2.312-8.187-7.602-17.015-8.408-36.775-2.743-54.56 7.13-25.072 15.761-49.632 24.68-74.128l2.125 3.906z" clip-path="url(#cj)" enable-background="new" filter="url(#il)" opacity=".588"/>
+  <path transform="translate(324.57 331.53)" d="m735.06 733.04l2.755 21.089 44.411-15.388 4.851-22.39-3.936-22.052-22.452-36.593-8.28 30.305-17.35 45.029z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#bz)"/>
+  <path transform="translate(324.57 331.53)" d="m831.81 730.29l15.822 14.905 20.855 2.9-1.59-39.926 8.325-30.508-7.165-6.341-21.697 20.942-14.55 38.028z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#by)"/>
+ </g>
+ <g transform="translate(324.57 331.53)" clip-path="url(#ik)" filter="url(#ij)">
+  <path d="M910.14 746.31l32.613 5.174-.361-23.876 7.188-29.682-8.45-5.264-21.823 26.511-9.167 27.137z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+  <path d="M877.52 650.19h123.04v172.53H877.52z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g transform="translate(324.57 331.53)" clip-path="url(#ii)" filter="url(#ih)">
+  <path d="M964 754.69l18.429 7.465 9.071-36.964-14.87 4.839L964 754.69z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+  <path d="M924.9 677.06h142.13v125.16H924.9z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g stroke-miterlimit="1">
+  <path d="m596.57 400.85h440v376h-440z" fill="none" stroke="#f8d615" stroke-width="18"/>
+  <path d="m104.57 248.85h1684v1292h-1684z" fill="none" stroke="#f83615" stroke-width="18"/>
+  <path d="M3407.4 296.46h522.57v1182.5H3407.4z" fill="url(#ig)" stroke="#f815bb" stroke-width="13.347"/>
+ </g>
+ <g transform="matrix(1.0057 0 0 2.3995 3452.3 -18.515)" clip-path="url(#if)" enable-background="new">
+  <g filter="url(#aq)">
+   <g transform="translate(-174.03 62.156)" filter="url(#g)">
+    <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+    <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
+   </g>
+  </g>
+  <g transform="translate(-174.03 62.156)" enable-background="new" filter="url(#g)" opacity=".18">
+   <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+   <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
+  </g>
+ </g>
+ <path d="M3492.3 296.46H3930v902.66h-437.7z" fill="#fff" stroke="#f8d615" stroke-miterlimit="1" stroke-width="18"/>
+ <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#ie)" enable-background="new" filter="url(#id)">
+  <path d="M36.494 811.806l-14.799 11.372-17.47-31.162 14.663.65 17.606 19.14z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+  <path d="M-55 757.2h182v177H-55z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#ic)" enable-background="new" filter="url(#gd)">
+  <path d="m83.111 790.72l-28.201 12.855-5.658-21.687-13.943-25.046 6.325-6.88 26.384 18.51 15.094 22.249z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+  <path d="M-22 696.2h165v176H-22z" enable-background="accumulate" fill="none"/>
+ </g>
+ <path transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" d="m332.34 898.39l-32.732-61.3-37.617 45.106c2.177 1.317 5.774-20.856 45.6-64.417l24.749 80.61z" clip-path="url(#gc)" enable-background="accumulate" fill="#fff" fill-rule="evenodd" filter="url(#gb)" opacity=".5"/>
+ <g clip-path="url(#ga)">
+  <g fill-rule="evenodd">
+   <g enable-background="new">
+    <path transform="matrix(.71488 -.46488 .26446 2.3151 3478.4 126.16)" d="m245.12 100.05s-47.128-31.647-67.215-35.801c-20.038-4.144-38.473-3.318-51.934 13.607s-12.077 61.265-13.536 86.97 2.55 70.177 17.605 88.666c15.055 18.488 45.886 13.585 49.927 21.414 2.213 4.287 65.152-174.86 65.152-174.86z" enable-background="accumulate" fill="url(#r)"/>
+    <path transform="matrix(.71488 -.46488 .26446 2.3151 3478.4 126.16)" d="M135.38 82.018s26.344 1.939 37.633 13.903c11.415 12.097 13.735 21.332 15.296 37.735 1.563 16.425-.85 28.418-7.814 36.037s-1.004 19.583-25.916 12.071-27.032-27.783-26.515-46.305c.517-18.529 7.316-53.441 7.316-53.441z" enable-background="accumulate" fill="url(#q)"/>
+    <path transform="matrix(.71488 -.46488 .26446 2.3151 3478.4 126.16)" d="M135.65 81.927s-4.645 16.365.588 28.563c5.488 12.793 27.224 44.26 27.224 54.656l22.656-5c2.542-6.966 3.21-15.752 2.188-26.5-1.562-16.403-3.867-25.621-15.281-37.719-9.655-10.232-31.593-13.375-37.375-14z" enable-background="new" fill="url(#p)"/>
+   </g>
+   <g enable-background="new">
+    <path d="M4043.297 824.626l-.09-.006c-1.489 1.728-6.783 2.02-7.718 20.884-.878 17.694 13.035 44.859 15.06 47.837 1.636 2.403 3.427 4.343 5.205 5.58l1.41.916c1.894 1.031 3.7 1.38 5.163 1.19 3.177-.414 5.214-.812 7.238-1.183 2.025-.372 2.592-1.8 3.707-2.078 1.156-.288 2.255.9 6.345-.372 4.09-1.271 5.587-1.894 6.324-2.566.765-.698 1.86-1.592 2.549-2.999 1.962.51 3.823.346 5.31-.58 3.08-1.92 5.084-3.12 6.998-4.722 1.536-1.285 2.513-3.421 2.759-4.073.246-.653.183-1.71.211-1.754.047-.072.351-.13.55-.906 1.07-4.167 2.968-12.778
+3.16-14.38.193-1.594.324-3.178.42-4.11.056-.54-.046-2.136-.017-2.27.04-.187.317-.518.401-1.098.404-2.783.343-5.237.292-8.675-.05-3.438-.44-11.267-.995-13.482-.356-1.423-.708-2.109-1.051-2.478-.065-.06-.119-.145-.18-.2-.02-.015-.043-.004-.062-.017-.303-.265-.59-.545-1.13-.839-.972-.527-2.393-1.283-3.937-1.684-.514-.134-1.041-.17-1.572-.205-3.591-.231-9.115-.108-10.396 1.072-1.593-1.244-3.874-2.542-5.879-2.746-3.086-.313-5.002-.546-6.953-.776-1.952-.23-1.73.464-2.958.32-1.328-.155-1.76-1.022-5.568-1.302-3.577-.262-9.087-.095-10.397 1.072-1.593-1.245-3.872-2.542-5.878-2.746-3.087-.313-5.006-.472-6.958-.702-.663-.078-1.055.01-1.364.079z" enable-background="new" fill="#bcb786"/>
+    <g transform="matrix(1.0047 .1075 -.04506 2.3971 3818.4 1782.9)" clip-path="url(#fz)" enable-background="new" filter="url(#fy)">
+     <path d="M229.94-409.12c-3.558.05-9.024.36-10.303.904-1.606-.447-3.903-.881-5.9-.877a979.03 979.03 0 0 1-6.907 0c-.66-.003-1.048.068-1.353.11v1.096c.12-.18.393-.69.95-.767.747-.103 5.17-.151 7.31-.11 1.775.035 4.455.274 6.39.96.32.113.618.273.891.41 1.964.987 7.944 4.302 7.944 4.302s-6.633-3.948-7.483-4.439c-.203-.117-.575-.258-1.036-.41 1.22-.449 5.076-.62 7.828-.713 3.024-.102 3.348-.09 5.41.192 2.13.29 3.34.602 3.34.602s-.08-.64 1.035-.794c.748-.103 5.17-.152 7.31-.11 2.07.04 5.366.407 7.282 1.37 1.003.504 3.035 1.569 4.795 2.536l.096-.02s-3.58-2.162-4.43-2.653c-.204-.117-.575-.258-1.037-.411 1.22-.448 5.047-.62 7.8-.712 3.024-.102 3.347-.09 5.41.191 1.954.267 3.013.53 3.195.576l-.027-.312a8.503 8.503 0 0 0-1.4-.357c-1.301-.235-3.4-.602-5.51-.564-3.571.064-9.052.356-10.302.904-1.606-.447-3.877-.881-5.871-.877-3.072.007-4.994.01-6.936
+0-1.943-.009-1.713.28-2.936.274-1.322-.005-1.766-.354-5.555-.301M206.2-407.48c1.92.817 4.577 2.193 6.159 3.397s2.908 1.774 5.555 3.918c.885.718 1.748 1.35 2.591 1.922l.541-.19a57.511 57.511 0 0 1-2.269-1.622c-2.822-2.12-3.627-2.81-6.015-4.274s-4.1-2.366-6.562-3.15" enable-background="new"/>
+     <path d="M237.8-407.48c1.92.817 4.606 2.193 6.188 3.397.813.62 1.558 1.07 2.45 1.654l.65-.116a40.414 40.414 0 0 0-2.697-1.784c-2.389-1.465-4.128-2.366-6.59-3.151" enable-background="new"/>
+    </g>
+    <g transform="matrix(.9991 .27421 -.11493 2.3838 2962.6 1209.8)" clip-path="url(#fx)">
+     <path d="M1056.2-278.8c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#fw)" opacity=".75"/>
+     <path d="M1058.5-275.43c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#fv)" opacity=".75"/>
+    </g>
+   </g>
+   <path d="M3603.7 633.68c-3.826-60.621-16.906-121.51-17.254-181.22-.187-32.048 3.291-63.757 13.834-94.91 36.554-156.68 117.6-203.23 186.99-219.47 87.416-26.435 185.96 43.047 234.7 228.91 54.432 181.72 56.997 414.01 81.07 622.74 29.605 305.05 55.09 614.78 60.735 928.25-3.08 187.6-8.474 396.35-60.847 547.4-48.299 120.83-123.49 120.1-188.13 141.58-91.07 11.17-185.4-38.742-263.27-154.04-65.144-91.037-96.274-272.3-97.832-446.36-8.437-191.66 26.542-369.07 51.914-545.07 7.513-198.58 9.466-398.92 9.708-598.39-.841-77.252-7.13-153.13-11.612-229.41z" enable-background="accumulate" fill="#101414"/>
+   <path transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" d="M311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24-38.612-142.96-39.243-189.12-.631-46.184 10.83-108.61 30.678-158.3 20.048-50.192 36.897-44.846 42.125-92.593s-17.426-149.39-17.426-149.39l-55.86 39.598z" clip-path="url(#y)" enable-background="accumulate" fill="#fff" filter="url(#fu)" opacity=".25"/>
+   <path d="m3987.6 1371.5s16.85 88.825 28.865 129.46c12.014 40.638 53.027 134.48 53.027 134.48l52.896-306.15" enable-background="accumulate" fill="url(#ft)"/>
+   <path transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" d="m730.32 536.57c0 8.485 42.548 58.468 42.548 58.468l12.607-28.77-55.154-29.698z" clip-path="url(#fs)" enable-background="accumulate" fill="#fff" filter="url(#fr)" opacity=".08"/>
+  </g>
+  <g transform="matrix(1.0057 0 0 2.3995 3424.4 -24.137)" clip-path="url(#fq)" enable-background="new">
+   <g transform="translate(-174.03 62.156)" filter="url(#aq)">
+    <g filter="url(#g)">
+     <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+     <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
+    </g>
+    <g filter="url(#g)">
+     <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+     <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
+    </g>
+   </g>
+   <g enable-background="new" opacity=".18">
+    <g transform="translate(-174.03 62.156)" filter="url(#g)">
+     <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+     <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
+    </g>
+    <g transform="translate(-174.03 62.156)" filter="url(#g)">
+     <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+     <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
+    </g>
+   </g>
+  </g>
+  <g transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" fill-rule="evenodd">
+   <path transform="translate(276 136)" d="m582.66-7.418l113.14 86.267 108.89 258.8 38.184 207.89 120.21 91.924s-12.728-287.09-19.799-313.96-149.91-393.15-149.91-393.15l-210.72 62.225z" clip-path="url(#fp)" enable-background="accumulate" filter="url(#fo)" opacity=".75"/>
+   <path d="m964.14 239.6s8.677 10.897 24.107 11.964c15.43 1.068 49.722-39.953 70.179-52.143 20.479-12.204 47.046-26.602 63.929-20.357 16.882 6.245 22.158 26.436 27.857 48.036 5.7 21.6 6.719 61.814-2.679 92.857-9.397 31.043-50.502 73.104-65.356 103.39s-11.607 39.821-11.607 39.821" enable-background="accumulate" fill="url(#el)"/>
+   <path d="m1124.5 207.63c-15.893-0.893-49.719 12.106-66.071 24.286-16.439 12.244-29.221 24.114-29.286 52.143-0.065 28.206 13.119 39.076 29.107 46.964s33.686 7.12 51.964-11.786c18.278-18.905 14.286-111.61 14.286-111.61z" enable-background="new" fill="url(#ek)"/>
+   <ellipse transform="matrix(.94347 -.12399 .14401 1.0958 451.95 134.6)" cx="385" cy="237.01" rx="86.429" ry="73.929" clip-path="url(#fn)" enable-background="accumulate" fill="url(#ef)" filter="url(#fm)" opacity=".75"/>
+   <path transform="translate(450.03 73.844)" d="m527.61 407.45s-122.04 38.403-187.51 9.632c-65.473-28.772-74.377-124.72-74.377-124.72s73.382-80.504 129.92-83.615c55.827-3.072 90.574 20.143 114.87 65.852 24.352 45.813 17.101 132.85 17.101 132.85z" enable-background="accumulate" fill="url(#fl)" mask="url(#fk)"/>
+   <path d="m772.17 393.35s36.218-27.382 51.607-35.893c15.177-8.393 25.714-11.607 35.893-11.607l-15.536 66.964" enable-background="accumulate" fill="url(#ee)"/>
+   <circle transform="translate(449.5 74.915)" cx="409.29" cy="306.65" r="36.25" enable-background="accumulate" fill="url(#ed)"/>
+   <path transform="translate(276 136)" d="m311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24 8.682-72.368-31.243-223.12l17.678-69.296 72.125-138.59-42.426-158.39-55.86 39.598z" clip-path="url(#y)" enable-background="accumulate" fill="#fff" filter="url(#fj)" opacity=".3"/>
+   <path d="m635.21 581.13c-14.142 12.728 39.233 34.58 76.368 24.042s104.64-35.564 103.24-79.196c-1.407-43.632-76.368-128.69-76.368-128.69l-103.24 183.85z" enable-background="accumulate" filter="url(#fi)" opacity=".5"/>
+   <circle transform="translate(449.67 74.915)" cx="410" cy="306.65" r="23.214" enable-background="accumulate" fill="url(#ec)"/>
+   <circle transform="translate(452 73.487)" cx="414.29" cy="303.08" r="7.5" enable-background="accumulate" fill="#fff" filter="url(#fh)" stroke="#000" stroke-linejoin="bevel"/>
+   <path d="m789.32 478.35s7.023 19.569-1.071 35-42.323 38.988-67.5 50c-25.31 11.07-85.473 32.964-101.79 41.964-16.461 9.082-18.214 12.679-18.214 12.679s-7.147-19.064 28.75-51.786c36.172-32.972 142.03-48.05 159.82-87.857z" enable-background="accumulate" fill="url(#eb)"/>
+  </g>
+  <g enable-background="new">
+   <g transform="matrix(1.0057 0 0 2.3995 3757 -22.424)" fill-rule="evenodd">
+    <path transform="translate(-329.81)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#x)" fill="url(#m)"/>
+    <ellipse transform="rotate(28.068 -88.085 -332.1)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#dz)"/>
+    <ellipse transform="rotate(28.068 -43.578 -333.81)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#fg)"/>
+   </g>
+   <path transform="matrix(1.0057 0 0 2.3995 3425.3 -22.424)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#x)" enable-background="new" fill="none" filter="url(#hd)" stroke="url(#l)" stroke-width="20.8"/>
+  </g>
+  <g transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" fill-rule="evenodd">
+   <circle transform="translate(452.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" stroke="#000" stroke-linejoin="bevel"/>
+   <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#m)" filter="url(#hc)" stroke="url(#l)" stroke-width="20.8"/>
+   <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#dy)"/>
+   <ellipse transform="rotate(-4.471 1823.1 -5529.2)" cx="429.57" cy="377.43" rx="72.08" ry="44.548" enable-background="accumulate" fill="url(#dx)" filter="url(#hb)"/>
+   <ellipse transform="matrix(1.4358 -.07 .07 1.4358 235.18 -63.865)" cx="437.7" cy="391.22" rx="36.612" ry="22.627" enable-background="accumulate" fill="url(#dw)" filter="url(#ha)"/>
+   <g transform="translate(450.03 73.844)" enable-background="new" filter="url(#gz)">
+    <circle cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#dv)"/>
+    <circle transform="translate(13.125 8.125)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#du)"/>
+    <circle transform="translate(32.946 7.5)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ej)"/>
+    <circle transform="translate(24.911 -10.268)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ei)"/>
+    <circle transform="translate(47.589 -.625)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#eh)"/>
+   </g>
+  </g>
+  <g fill="none" stroke="#000">
+   <path transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" d="M896.2 482.93c.985 4.35 4.537 6.18 7.387 7.892 4.46 2.513 6.52 1.522 9.154-.758 1.602-1.921 10.683-4.698 15.594-7.07 4.33-1.46 8.904-5.36 13.385-8.335 3.395-1.627 5.347.355 7.829 1.01 2.944.717 4.411 2.172 6.06 3.536 2.397 1.175-.927 3.143 3.284 4.293 1.19.218 2.417.577 3.283-.505" enable-background="new"/>
+   <path transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" d="M910.85 475.35c2.315-.032 3.178.643 5.493-.82 3.455-3.082 5.402-3.146 7.955-4.42 3.026-1.315 6.535 8.152 10.102 9.849 2.395-.822 1.289 1.794 1.452 2.651.057 2.647 2.807 3.679 4.356 5.43 3.316 2.256 7.375 6.296 11.112 5.303 6.445-2.93 10.28-1.281 16.29-7.386.703-1.182-.585-6.895 3.093-7.198 2.524.254 4.166.05 6.06.569 5.442 2.117 7.738 6.45 14.71 7.955 6.184.966 7.613 3.794 13.89 5.05M876.98 483.52c2.399-.794 6.106 4.192 8.173 7.046.593 2.68 1.154 5.486.758 12.122.785 2.417 2.68 3.03 4.798 3.283 3.117-.537 5.877-1.325 7.324-3.03 1.871-1.942 5.312 2.393 8.08 4.04 3.61 1.912 7.775 1.979 11.87 2.273 1.703-.231 2.37 4.515 3.283 8.08.384 4.379-.886 6.897-1.768 9.85-.294 2.496 2.988 3.53 6.313 4.546 3.183.74 6.545 1.661 9.092 1.767 5.142.875 8.088 2.69 12.122 4.04 2.239.817 3.26 2.243 4.545 3.536" enable-background="new"/>
+  </g>
+  <g transform="matrix(.9991 .27421 -.11493 2.3838 2962.6 1209.8)" enable-background="new" fill-rule="evenodd" mask="url(#gy)">
+   <path d="M1111.48-285.971l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.312-.486.21-1.737.585-4.093 1.47-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.593c-1.894.42-1.675.642-2.875.875-1.296.252-1.721-.009-5.437.782-3.49.742-8.895 1.93-10.156 2.687-1.584-.18-3.868-.322-5.844-.031-3.04.447-4.916.673-6.844.906-.655.08-1.04.2-1.343.281-.427.132-.686.26-1.375.344-1.312.16-1.763-.157-5.532.281-3.554.413-9.005 1.273-10.25 1.938-1.599-.297-3.857-.534-5.843-.344-3.06.293-4.972.484-6.907.656-1.934.173-1.688.423-2.906.532-1.316.117-1.76-.164-5.531.25-3.542.388-9.008 1.209-10.281 1.875-1.6-.295-3.887-.507-5.875-.313-3.058.3-4.941.48-6.875.656-.658.06-1.04.179-1.344.25-.428.12-.683.218-1.375.282-1.316.12-1.76-.195-5.531.218-3.556.39-9.006 1.24-10.25
+1.907-1.599-.295-3.86-.524-5.844-.313-3.056.325-4.974.526-6.906.719s-1.69.44-2.906.562c-1.315.132-1.763-.164-5.532.282-3.538.418-8.977 1.292-10.25 1.968-1.597-.28-3.86-.42-5.843-.187-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.127-.685.267-1.375.344-1.314.146-1.768-.174-5.531.312-3.55.46-8.979 1.42-10.22 2.125-1.592-.244-3.833-.381-5.812-.125-3.047.395-4.95.649-6.875.907-1.924.257-1.726.493-2.937.656-1.31.176-1.748-.105-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.255-5.813.094-3.026.536-4.899.861-6.812 1.187-.65.111-1.014.271-1.313.375-.42.165-.663.332-1.344.469-1.294.262-1.727-.006-5.437.813-3.499.771-8.846 2.382-10.062 3.218-1.563-.077-3.758.086-5.688.594-2.972.783-4.817 1.232-6.687 1.75s-1.667.767-2.844 1.094c-1.272.353-1.697.107-5.344 1.187-3.424 1.015-8.65 2.934-9.875 3.844-1.539.013-3.72.272-5.625.875-2.93.928-4.75 1.459-6.594
+2.063-.626.205-.991.392-1.28.53-.408.215-.654.41-1.313.626-1.255.411-1.686.189-5.281 1.437-3.39 1.178-8.595 3.214-9.782 4.157-1.524.06-3.65.395-5.53 1.062-2.898 1.028-4.7 1.676-6.532 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.469-1.507.108-3.635.499-5.5 1.219a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.593v.031l-8 3.188-12.476 3.492 7.93 19.278c-.592 1.973 12.545-4.739 12.545-4.739.227-.144.45-.272.72-.375 1.08-.41 2.17-.215 6-1.687 3.828-1.472 5.223-2.005 5.905-2.406.68-.4 1.612-.88 2.22-1.531 1.826-.138 3.57-.494 4.937-1 2.968-1.1 4.875-1.807 6.78-2.47 1.907-.662 2.355-1.414 3.407-1.78 1.092-.38 2.195-.166 6.063-1.532 3.867-1.366 5.283-1.827 5.968-2.218.702-.4 1.701-.933 2.313-1.594 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.926-1.622 6.844-2.25 1.538-.504 2.174-1.047 2.906-1.438.23-.134.476-.253.75-.343 1.098-.36
+2.181-.082 6.094-1.313 3.912-1.231 5.366-1.673 6.062-2.031.694-.357 1.63-.793 2.25-1.406 1.866-.023 3.636-.267 5.032-.688 3.03-.913 4.992-1.43 6.937-1.969 1.945-.538 2.426-1.264 3.5-1.562 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.734-.33 1.813-.754 2.437-1.375 1.998.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.245-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.134-.23 2.305.209 6.344-.5 4.04-.71 5.5-.927 6.219-1.188.716-.26 1.704-.567 2.344-1.093 1.924.239 3.748.224 5.187 0 3.127-.488 5.155-.701 7.156-.97 2.002-.267 2.49-.944 3.594-1.093 1.147-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.281-.937.737-.247 1.798-.586 2.438-1.125 2.05.335 3.973.398 5.5.218 3.142-.368 5.18-.559 7.187-.78 1.611-.179 2.265-.609 3.031-.845.241-.085.495-.155.782-.187 1.15-.128 2.301.347 6.375-.125s5.559-.61 6.28-.844c.72-.232 1.701-.473 2.345-.969 1.936.334 3.77.405
+5.219.25 3.146-.334 5.177-.518 7.187-.718 2.01-.2 2.484-.827 3.594-.938 1.15-.115 2.296.365 6.375-.062s5.589-.562 6.312-.782c.74-.223 1.796-.513 2.438-1.03 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.03-.781.242-.081.494-.13.782-.157 1.152-.105 2.293.393 6.375 0s5.589-.53 6.312-.75c.721-.218 1.7-.447 2.344-.937 1.938.35 3.769.454 5.219.312 3.149-.308 5.176-.473 7.187-.656 2.012-.183 2.515-.838 3.625-.937 1.153-.104 2.293.384 6.375 0 4.083-.385 5.59-.501 6.313-.72.74-.222 1.796-.514 2.437-1.03 2.058.401 4.003.503 5.532.343 3.146-.328 5.177-.522 7.187-.718 1.613-.158 2.266-.632 3.031-.875.241-.088.464-.122.75-.157 1.149-.14 2.317.34 6.375-.25 4.059-.59 5.562-.777 6.282-1.03.716-.254 1.674-.559 2.312-1.095 1.92.212 3.72.152 5.156-.093 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.563-1.281 1.128-.25 2.27.116 6.25-.875s5.43-1.42
+6.125-1.781c.722-.376 1.761-.87 2.375-1.531 1.963-.012 3.793-.292 5.218-.844 2.952-1.145 4.874-1.87 6.688-2.75 1.456-.707 2.32-1.702 2.531-2 .212-.298.1-.729.125-.75.043-.035.34-.094.5-.438.86-1.847 2.323-5.627 2.438-6.312.113-.682.168-1.353.218-1.75.03-.23-.147-.88-.125-.938.031-.082.289-.25.344-.5.266-1.198.09-2.207-.125-3.625-.214-1.417-.972-4.614-1.625-5.469-.659-.861-1.225-1.01-1.75-1z" enable-background="new" fill="#bcb786"/>
+   <g clip-path="url(#gx)">
+    <path d="M1107.4-284.05c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
+1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
+2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
+2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
+3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
+1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
+3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#gw)"/>
+    <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#gv)"/>
+    <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#gu)"/>
+    <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#gt)"/>
+    <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25
+1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1 .17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437
+1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0 1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956
+5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218 1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584
+5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969 2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101
+7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23 2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219
+1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474 7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
+2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.442 3.94 1.579 5.39.19 2.86-.088 3.468c-.278.609-.944.429-1.237.495.531.186.89.213.953 1.057.058.814-.134 1.64-.52 2.806-.391 1.18-1.845 4.35-2.286 4.599-.452.255-.952.182-1.288.05z" enable-background="new" filter="url(#gs)"/>
+    <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#gr)"/>
+    <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#gq)"/>
+    <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#gp)"/>
+    <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#go)"/>
+    <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#gn)"/>
+    <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#gm)"/>
+    <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#gl)"/>
+    <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#gk)"/>
+    <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#gj)"/>
+    <g fill="#fff" filter="url(#gi)">
+     <path d="M744.94-212.12s7.222-3.223 9.063-3.5 3.352-.003 6 .563c2.647.565 8.735 2.215 11.188 3.374s5.312 3.563 5.312 3.563-7.146-2.78-10.188-3.563-7.645-2.083-10.375-2.312-11 1.875-11 1.875z"/>
+     <path d="m735.47-206.95s3.66-2.223 5.5-2.5 3.665 0.247 6.313 0.813 8.735 2.215 11.188 3.375 6.562 2.125 6.562 2.125-8.396-1.343-11.438-2.125-7.957-2.334-10.688-2.563-7.438 0.875-7.438 0.875zm24.38-10.66s8.544-3.299 10.398-3.458c1.854-0.16 3.642 0.48 6.248 1.212s8.577 2.766 10.95 4.08 6.414 2.537 6.414 2.537-8.294-1.873-11.279-2.848c-2.985-0.974-7.792-2.834-10.503-3.236s-12.228 1.713-12.228 1.713zm15.35-5.62s7.771-2.782 9.628-2.904c1.857-0.12 3.631 0.555 6.222 1.341 2.59 0.787 8.519 2.942 10.864 4.304 2.346 1.362 6.36 2.67 6.36 2.67s-8.253-2.045-11.217-3.08c-2.965-1.035-7.733-2.995-10.434-3.452-2.702-0.458-11.422 1.121-11.422 1.121zm14.44-4.72s8.683-3.52 10.542-3.605 3.62 0.624 6.195 1.46c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.408 6.307 2.793 6.307 2.793s-8.212-2.204-11.156-3.297-7.673-3.144-10.365-3.654-12.3 1.789-12.3 1.789zm14.86-5.38s7.808-2.583 9.666-2.668c1.86-0.085 3.62
+0.625 6.195 1.461 2.575 0.837 8.46 3.107 10.78 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.213-2.204-11.156-3.296-7.673-3.144-10.365-3.654-11.426 0.85-11.426 0.85zm15.06-4.25s8.558-2.583 10.417-2.668 3.62 0.625 6.195 1.461c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.212-2.204-11.156-3.296-7.673-3.144-10.365-3.654-12.176 0.85-12.176 0.85zm16.67-5.02s6.967-1.987 8.828-1.968c1.86 0.02 3.579 0.827 6.102 1.807 2.524 0.98 8.272 3.578 10.508 5.113 2.236 1.536 6.14 3.143 6.14 3.143s-8.075-2.662-10.952-3.919c-2.878-1.256-7.484-3.57-10.143-4.231-2.66-0.66-10.482 0.055-10.482 0.055zm14.5-3.4s7.688-2.028 9.548-1.968 3.56 0.902 6.063 1.936c2.502 1.033 8.194 3.752 10.397 5.335 2.203 1.582 6.072 3.272 6.072 3.272s-8.017-2.833-10.868-4.15c-2.85-1.318-7.407-3.73-10.05-4.446s-11.162 0.021-11.162 0.021zm14.09-3.21s8.17-1.97 10.027-1.854c1.857 0.115 3.532 1.01 6.002
+2.118s8.077 3.997 10.23 5.645 5.972 3.454 5.972 3.454-7.928-3.074-10.738-4.476-7.291-3.95-9.913-4.746c-2.621-0.796-11.58-0.141-11.58-0.141zm16.56-2.39s8.085-1.908 9.938-1.737c1.853 0.172 3.5 1.117 5.935 2.3 2.436 1.182 7.952 4.24 10.055 5.953s5.864 3.633 5.864 3.633-7.832-3.312-10.597-4.8-7.168-4.169-9.764-5.044c-2.597-0.876-11.431-0.305-11.431-0.305zm15.2-2.75s7.642-1.428 9.495-1.265c1.854 0.162 3.505 1.1 5.946 2.27s7.973 4.203 10.084 5.905c2.112 1.703 5.881 3.605 5.881 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.998-0.77-10.998-0.77zm14.87-1.64s8.642-1.553 10.495-1.39c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.998-0.644-11.998-0.644zm16.25-2.31s7.642-0.865 9.495-0.703c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203 10.084
+5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.862-10.998-1.331-10.998-1.331zm15.13-1.19s8.58-1.49 10.433-1.328c1.854 0.163 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.906c2.111 1.702 5.88 3.605 5.88 3.605s-7.846-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.862-11.935-0.706-11.935-0.706zm16.25-2.06s7.83-0.803 9.683-0.64c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.185-1.394-11.185-1.394zm15.37-1.25s8.392-1.178 10.245-1.015c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-11.748-1.02-11.748-1.02zm16.19-2.06s6.892-0.99 8.745-0.828c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203
+10.084 5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749-7.188-4.135-9.788-4.998c-2.6-0.862-10.248-1.206-10.248-1.206zm17.16-0.94s6.83-1.178 8.683-1.015c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.185-1.02-10.185-1.02zm16.1-2s6.08-0.428 7.933-0.265c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.435-1.77-9.435-1.77zm15.8-1.37s6.454-0.678 8.308-0.515c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.81-1.52-9.81-1.52zm15.6-1.86s5.498-0.91 7.358-0.853c1.86 0.056 3.562 0.896 6.066 1.925
+2.504 1.03 8.2 3.739 10.406 5.318 2.205 1.578 6.078 3.261 6.078 3.261s-8.022-2.819-10.875-4.131c-2.853-1.313-7.413-3.716-10.06-4.429-2.645-0.712-8.973-1.091-8.973-1.091zm17.4-2.46s4.547-1.156 6.408-1.186c1.86-0.03 3.6 0.73 6.149 1.642 2.55 0.912 8.365 3.354 10.64 4.829 2.277 1.474 6.224 2.976 6.224 2.976s-8.145-2.444-11.055-3.623c-2.91-1.178-7.578-3.368-10.253-3.957-2.676-0.588-8.113-0.68-8.113-0.68zm14.5-3.03s5.96-1.774 7.82-1.83c1.86-0.057 3.61 0.68 6.172 1.555 2.562 0.876 2.522 0.857 5.333 1.49 2.797 0.63 7.077 1.513 7.077 1.513s-3.616-0.016-6.792-0.466c-3.116-0.441-7.375-1.698-10.058-2.249-2.684-0.55-9.552-0.013-9.552-0.013z" enable-background="new"/>
+     <path d="M1099.2-279.93c.161.269 11.208-4.6 12.188-4.688.98-.087 2 3.125 2 3.125s-.775-1.504-2.875-1.062-11.301 2.671-11.312 2.625z"/>
+    </g>
+    <path d="M1107.5-284.09c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
+1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
+2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
+2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
+3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
+1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
+3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#gh)" opacity=".25"/>
+    <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#gg)" opacity=".25"/>
+    <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#gf)" opacity=".25"/>
+    <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#ge)" opacity=".25"/>
+    <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25
+1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1 .17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437
+1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0 1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956
+5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218 1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584
+5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969 2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101
+7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23 2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219
+1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474 7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
+2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.221 3.85 1.358 5.301.19 2.86-.088 3.469c-.278.608-.723.517-1.016.583.531.186.67.125.732.969.058.813-.134 1.64-.52 2.806-.392 1.18-1.846 4.35-2.286 4.598-.452.256-.731.27-1.067.14z" enable-background="new" filter="url(#ff)" opacity=".25"/>
+    <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#fe)" opacity=".25"/>
+    <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#fd)" opacity=".25"/>
+    <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#fc)" opacity=".25"/>
+    <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#fb)" opacity=".25"/>
+    <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#fa)" opacity=".25"/>
+    <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#ez)" opacity=".25"/>
+    <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#ey)" opacity=".25"/>
+    <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#ex)" opacity=".25"/>
+    <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#ew)" opacity=".25"/>
+   </g>
+  </g>
+  <path d="M3840.7 940.04c1.651-7.722 3.538-13.762 4.889-23.633.803-8.777 3.33-4.873 7.302-20.148 1.41-5.374 5.507.94 9.016-5.757 1.278-1.927 2.901-.97 4.508-.151 3.787 3.165 5.859 8.887 8.381 13.937 6.174 14.326 20.651 19.06 23.62 15.149 1.442-6.97 7.926-12.979 12.444-26.663.752-2.694 11.796-20.982 14.73-15.755" enable-background="new" fill="none" stroke="#000"/>
+  <path d="M3865.4 915.04c7.405-7.758 13.89-21.376 20.826-32.117 3.33-4.726 6.909 7.717 10.857 8.635 2.31-.523 3.734 2.886 5.714 3.939 5.186 3.162 2.412 9.274 10.032 15.452 6.191 4.128 8.958-16.313 14.985-17.573 4.906-1.207 8.145-.758 11.683-.606 3.95.333 4.102-8.393 6.096-12.725 2.997-6.731 7.196-4.438 10.203-11.376 1.023-3.323 1.965-7.224 2.75-12.257.887-4.8 3.057.734 4.825 3.03" enable-background="new" fill="none" stroke="#000"/>
+  <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#ev)" filter="url(#eu)">
+   <path d="M910.14 746.31l32.613 5.174-.361-23.876 7.188-29.682-8.45-5.264-21.823 26.511-9.167 27.137z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+   <path d="M877.52 650.19h123.04v172.53H877.52z" enable-background="accumulate" fill="none"/>
+  </g>
+  <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#et)" filter="url(#es)">
+   <path d="M964 754.69l18.429 7.465 9.071-36.964-14.87 4.839L964 754.69z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+   <path d="M924.9 677.06h142.13v125.16H924.9z" enable-background="accumulate" fill="none"/>
+  </g>
+ </g>
+ <path d="m592.8 398.62l2899.5-102.16" fill="#f8d615" fill-rule="evenodd" marker-end="url(#er)" stroke="#f8d615" stroke-width="17.844"/>
+ <path d="m576.48 779.92l2914.5 416.44" enable-background="new" fill="#f8d615" fill-rule="evenodd" marker-end="url(#eq)" stroke="#f8d615" stroke-width="18"/>
+ <g font-family="sans-serif" letter-spacing="0" word-spacing="0">
+  <text transform="translate(48.571 195.53)" x="80.219" y="107.387" fill="#f83615" font-size="40" style="line-height:125%">
+   <tspan x="80.219" y="107.387" font-size="50">CROP_DEFAULT</tspan>
+  </text>
+  <g font-size="45.314">
+   <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3861.367" y="1281.72" enable-background="new" fill="#f80000" fill-opacity="0" style="line-height:125%">
+    <tspan x="3861.367" y="1281.72" font-size="56.642">COMPOSE_PADDED</tspan>
+   </text>
+   <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3615.155" y="49.157" enable-background="new" fill="#f8d615" style="line-height:125%">
+    <tspan x="3615.155" y="49.157" font-size="50">COMPOSE_ACTIVE</tspan>
+   </text>
+   <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="2429.153" y="-3.166" enable-background="new" fill="#f83615" style="line-height:125%">
+    <tspan x="2429.153" y="-3.166" font-size="50">COMPOSE_DEFAULT</tspan>
+   </text>
+   <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3681.545" y="1289.954" enable-background="new" fill="#f815bb" style="line-height:125%">
+    <tspan x="3681.545" y="1289.954" font-size="50">COMPOSE_PADDED</tspan>
+   </text>
+  </g>
+  <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="2438.062" y="1368.429" enable-background="new" font-size="50" style="line-height:125%">
+   <tspan x="2438.062" y="1368.429">COMPOSE_BOUNDS</tspan>
+  </text>
+  <g font-size="40">
+   <text transform="translate(48.571 195.53)" x="8.082" y="1438.896" enable-background="new" style="line-height:125%">
+    <tspan x="8.082" y="1438.896" font-size="50">CROP_BOUNDS</tspan>
+   </text>
+   <text transform="translate(48.571 195.53)" x="1455.443" y="-26.808" enable-background="new" style="line-height:125%">
+    <tspan x="1455.443" y="-26.808" font-size="50">overscan area</tspan>
+   </text>
+   <text transform="translate(48.571 195.53)" x="179.631" y="385.388" enable-background="new" fill="#f8d615" style="line-height:125%">
+    <tspan x="179.631" y="385.388" font-size="50">CROP_ACTIVE</tspan>
+   </text>
+   <text transform="translate(48.571 195.53)" x="636.674" y="-138.845" enable-background="new" style="line-height:125%">
+    <tspan x="636.674" y="-138.845" font-size="70" font-weight="bold">DATA SOURCE</tspan>
+   </text>
+  </g>
+  <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3178.715" y="-129.061" enable-background="new" font-size="45.314" style="line-height:125%">
+   <tspan x="3178.715" y="-129.061" font-size="70" font-weight="bold">DATA SINK</tspan>
+  </text>
+ </g>
+</svg>
diff --git a/Documentation/userspace-api/media/v4l/selections-common.rst b/Documentation/userspace-api/media/v4l/selections-common.rst
new file mode 100644
index 000000000000..d5ea05869a61
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/selections-common.rst
@@ -0,0 +1,30 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-selections-common:
+
+Common selection definitions
+============================
+
+While the :ref:`V4L2 selection API <selection-api>` and
+:ref:`V4L2 subdev selection APIs <v4l2-subdev-selections>` are very
+similar, there's one fundamental difference between the two. On
+sub-device API, the selection rectangle refers to the media bus format,
+and is bound to a sub-device's pad. On the V4L2 interface the selection
+rectangles refer to the in-memory pixel format.
+
+This section defines the common definitions of the selection interfaces
+on the two APIs.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    v4l2-selection-targets
+    v4l2-selection-flags
diff --git a/Documentation/userspace-api/media/v4l/standard.rst b/Documentation/userspace-api/media/v4l/standard.rst
new file mode 100644
index 000000000000..61c341508eb3
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/standard.rst
@@ -0,0 +1,192 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _standard:
+
+***************
+Video Standards
+***************
+
+Video devices typically support one or more different video standards or
+variations of standards. Each video input and output may support another
+set of standards. This set is reported by the ``std`` field of struct
+:c:type:`v4l2_input` and struct
+:c:type:`v4l2_output` returned by the
+:ref:`VIDIOC_ENUMINPUT` and
+:ref:`VIDIOC_ENUMOUTPUT` ioctls, respectively.
+
+V4L2 defines one bit for each analog video standard currently in use
+worldwide, and sets aside bits for driver defined standards, e. g.
+hybrid standards to watch NTSC video tapes on PAL TVs and vice versa.
+Applications can use the predefined bits to select a particular
+standard, although presenting the user a menu of supported standards is
+preferred. To enumerate and query the attributes of the supported
+standards applications use the :ref:`VIDIOC_ENUMSTD`
+ioctl.
+
+Many of the defined standards are actually just variations of a few
+major standards. The hardware may in fact not distinguish between them,
+or do so internal and switch automatically. Therefore enumerated
+standards also contain sets of one or more standard bits.
+
+Assume a hypothetic tuner capable of demodulating B/PAL, G/PAL and I/PAL
+signals. The first enumerated standard is a set of B and G/PAL, switched
+automatically depending on the selected radio frequency in UHF or VHF
+band. Enumeration gives a "PAL-B/G" or "PAL-I" choice. Similar a
+Composite input may collapse standards, enumerating "PAL-B/G/H/I",
+"NTSC-M" and "SECAM-D/K". [#f1]_
+
+To query and select the standard used by the current video input or
+output applications call the :ref:`VIDIOC_G_STD <VIDIOC_G_STD>` and
+:ref:`VIDIOC_S_STD <VIDIOC_G_STD>` ioctl, respectively. The
+*received* standard can be sensed with the
+:ref:`VIDIOC_QUERYSTD` ioctl.
+
+.. note::
+
+   The parameter of all these ioctls is a pointer to a
+   :ref:`v4l2_std_id <v4l2-std-id>` type (a standard set), *not* an
+   index into the standard enumeration. Drivers must implement all video
+   standard ioctls when the device has one or more video inputs or outputs.
+
+Special rules apply to devices such as USB cameras where the notion of
+video standards makes little sense. More generally for any capture or
+output device which is:
+
+-  incapable of capturing fields or frames at the nominal rate of the
+   video standard, or
+
+-  that does not support the video standard formats at all.
+
+Here the driver shall set the ``std`` field of struct
+:c:type:`v4l2_input` and struct
+:c:type:`v4l2_output` to zero and the :ref:`VIDIOC_G_STD <VIDIOC_G_STD>`,
+:ref:`VIDIOC_S_STD <VIDIOC_G_STD>`, :ref:`VIDIOC_QUERYSTD` and :ref:`VIDIOC_ENUMSTD` ioctls
+shall return the ``ENOTTY`` error code or the ``EINVAL`` error code.
+
+Applications can make use of the :ref:`input-capabilities` and
+:ref:`output-capabilities` flags to determine whether the video
+standard ioctls can be used with the given input or output.
+
+Example: Information about the current video standard
+=====================================================
+
+.. code-block:: c
+
+    v4l2_std_id std_id;
+    struct v4l2_standard standard;
+
+    if (-1 == ioctl(fd, VIDIOC_G_STD, &std_id)) {
+	/* Note when VIDIOC_ENUMSTD always returns ENOTTY this
+	   is no video device or it falls under the USB exception,
+	   and VIDIOC_G_STD returning ENOTTY is no error. */
+
+	perror("VIDIOC_G_STD");
+	exit(EXIT_FAILURE);
+    }
+
+    memset(&standard, 0, sizeof(standard));
+    standard.index = 0;
+
+    while (0 == ioctl(fd, VIDIOC_ENUMSTD, &standard)) {
+	if (standard.id & std_id) {
+	       printf("Current video standard: %s\\n", standard.name);
+	       exit(EXIT_SUCCESS);
+	}
+
+	standard.index++;
+    }
+
+    /* EINVAL indicates the end of the enumeration, which cannot be
+       empty unless this device falls under the USB exception. */
+
+    if (errno == EINVAL || standard.index == 0) {
+	perror("VIDIOC_ENUMSTD");
+	exit(EXIT_FAILURE);
+    }
+
+Example: Listing the video standards supported by the current input
+===================================================================
+
+.. code-block:: c
+
+    struct v4l2_input input;
+    struct v4l2_standard standard;
+
+    memset(&input, 0, sizeof(input));
+
+    if (-1 == ioctl(fd, VIDIOC_G_INPUT, &input.index)) {
+	perror("VIDIOC_G_INPUT");
+	exit(EXIT_FAILURE);
+    }
+
+    if (-1 == ioctl(fd, VIDIOC_ENUMINPUT, &input)) {
+	perror("VIDIOC_ENUM_INPUT");
+	exit(EXIT_FAILURE);
+    }
+
+    printf("Current input %s supports:\\n", input.name);
+
+    memset(&standard, 0, sizeof(standard));
+    standard.index = 0;
+
+    while (0 == ioctl(fd, VIDIOC_ENUMSTD, &standard)) {
+	if (standard.id & input.std)
+	    printf("%s\\n", standard.name);
+
+	standard.index++;
+    }
+
+    /* EINVAL indicates the end of the enumeration, which cannot be
+       empty unless this device falls under the USB exception. */
+
+    if (errno != EINVAL || standard.index == 0) {
+	perror("VIDIOC_ENUMSTD");
+	exit(EXIT_FAILURE);
+    }
+
+Example: Selecting a new video standard
+=======================================
+
+.. code-block:: c
+
+    struct v4l2_input input;
+    v4l2_std_id std_id;
+
+    memset(&input, 0, sizeof(input));
+
+    if (-1 == ioctl(fd, VIDIOC_G_INPUT, &input.index)) {
+	perror("VIDIOC_G_INPUT");
+	exit(EXIT_FAILURE);
+    }
+
+    if (-1 == ioctl(fd, VIDIOC_ENUMINPUT, &input)) {
+	perror("VIDIOC_ENUM_INPUT");
+	exit(EXIT_FAILURE);
+    }
+
+    if (0 == (input.std & V4L2_STD_PAL_BG)) {
+	fprintf(stderr, "Oops. B/G PAL is not supported.\\n");
+	exit(EXIT_FAILURE);
+    }
+
+    /* Note this is also supposed to work when only B
+       or G/PAL is supported. */
+
+    std_id = V4L2_STD_PAL_BG;
+
+    if (-1 == ioctl(fd, VIDIOC_S_STD, &std_id)) {
+	perror("VIDIOC_S_STD");
+	exit(EXIT_FAILURE);
+    }
+
+.. [#f1]
+   Some users are already confused by technical terms PAL, NTSC and
+   SECAM. There is no point asking them to distinguish between B, G, D,
+   or K when the software or hardware can do that automatically.
diff --git a/Documentation/userspace-api/media/v4l/streaming-par.rst b/Documentation/userspace-api/media/v4l/streaming-par.rst
new file mode 100644
index 000000000000..6d1a1b93ac8b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/streaming-par.rst
@@ -0,0 +1,40 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _streaming-par:
+
+********************
+Streaming Parameters
+********************
+
+Streaming parameters are intended to optimize the video capture process
+as well as I/O. Presently applications can request a high quality
+capture mode with the :ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` ioctl.
+
+The current video standard determines a nominal number of frames per
+second. If less than this number of frames is to be captured or output,
+applications can request frame skipping or duplicating on the driver
+side. This is especially useful when using the
+:ref:`read() <func-read>` or :ref:`write() <func-write>`, which are
+not augmented by timestamps or sequence counters, and to avoid
+unnecessary data copying.
+
+Finally these ioctls can be used to determine the number of buffers used
+internally by a driver in read/write mode. For implications see the
+section discussing the :ref:`read() <func-read>` function.
+
+To get and set the streaming parameters applications call the
+:ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and
+:ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` ioctl, respectively. They take
+a pointer to a struct :c:type:`v4l2_streamparm`, which
+contains a union holding separate parameters for input and output
+devices.
+
+These ioctls are optional, drivers need not implement them. If so, they
+return the ``EINVAL`` error code.
diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst
new file mode 100644
index 000000000000..9a4d61b0d76f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -0,0 +1,7833 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-mbus-format:
+
+Media Bus Formats
+=================
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_mbus_framefmt
+
+.. flat-table:: struct v4l2_mbus_framefmt
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``width``
+      - Image width in pixels.
+    * - __u32
+      - ``height``
+      - Image height in pixels. If ``field`` is one of ``V4L2_FIELD_TOP``,
+	``V4L2_FIELD_BOTTOM`` or ``V4L2_FIELD_ALTERNATE`` then height
+	refers to the number of lines in the field, otherwise it refers to
+	the number of lines in the frame (which is twice the field height
+	for interlaced formats).
+    * - __u32
+      - ``code``
+      - Format code, from enum
+	:ref:`v4l2_mbus_pixelcode <v4l2-mbus-pixelcode>`.
+    * - __u32
+      - ``field``
+      - Field order, from enum :c:type:`v4l2_field`. See
+	:ref:`field-order` for details.
+    * - __u32
+      - ``colorspace``
+      - Image colorspace, from enum
+	:c:type:`v4l2_colorspace`. See
+	:ref:`colorspaces` for details.
+    * - __u16
+      - ``ycbcr_enc``
+      - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - __u16
+      - ``quantization``
+      - Quantization range, from enum :c:type:`v4l2_quantization`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - __u16
+      - ``xfer_func``
+      - Transfer function, from enum :c:type:`v4l2_xfer_func`.
+        This information supplements the ``colorspace`` and must be set by
+	the driver for capture streams and by the application for output
+	streams, see :ref:`colorspaces`.
+    * - __u16
+      - ``reserved``\ [11]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+
+
+
+.. _v4l2-mbus-pixelcode:
+
+Media Bus Pixel Codes
+---------------------
+
+The media bus pixel codes describe image formats as flowing over
+physical buses (both between separate physical components and inside
+SoC devices). This should not be confused with the V4L2 pixel formats
+that describe, using four character codes, image formats as stored in
+memory.
+
+While there is a relationship between image formats on buses and image
+formats in memory (a raw Bayer image won't be magically converted to
+JPEG just by storing it to memory), there is no one-to-one
+correspondence between them.
+
+The media bus pixel codes document parallel formats. Should the pixel data be
+transported over a serial bus, the media bus pixel code that describes a
+parallel format that transfers a sample on a single clock cycle is used. For
+instance, both MEDIA_BUS_FMT_BGR888_1X24 and MEDIA_BUS_FMT_BGR888_3X8 are used
+on parallel busses for transferring an 8 bits per sample BGR data, whereas on
+serial busses the data in this format is only referred to using
+MEDIA_BUS_FMT_BGR888_1X24. This is because there is effectively only a single
+way to transport that format on the serial busses.
+
+Packed RGB Formats
+^^^^^^^^^^^^^^^^^^
+
+Those formats transfer pixel data as red, green and blue components. The
+format code is made of the following information.
+
+-  The red, green and blue components order code, as encoded in a pixel
+   sample. Possible values are RGB and BGR.
+
+-  The number of bits per component, for each component. The values can
+   be different for all components. Common values are 555 and 565.
+
+-  The number of bus samples per pixel. Pixels that are wider than the
+   bus width must be transferred in multiple samples. Common values are
+   1 and 2.
+
+-  The bus width.
+
+-  For formats where the total number of bits per pixel is smaller than
+   the number of bus samples per pixel times the bus width, a padding
+   value stating if the bytes are padded in their most high order bits
+   (PADHI) or low order bits (PADLO). A "C" prefix is used for
+   component-wise padding in the most high order bits (CPADHI) or low
+   order bits (CPADLO) of each separate component.
+
+-  For formats where the number of bus samples per pixel is larger than
+   1, an endianness value stating if the pixel is transferred MSB first
+   (BE) or LSB first (LE).
+
+For instance, a format where pixels are encoded as 5-bits red, 5-bits
+green and 5-bit blue values padded on the high bit, transferred as 2
+8-bit samples per pixel with the most significant bits (padding, red and
+half of the green value) transferred first will be named
+``MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE``.
+
+The following tables list existing packed RGB formats.
+
+.. HACK: ideally, we would be using adjustbox here. However, Sphinx
+.. is a very bad behaviored guy: if the table has more than 30 cols,
+.. it switches to long table, and there's no way to override it.
+
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-rgb:
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. flat-table:: RGB formats
+    :header-rows:  2
+    :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`31` Data organization
+    * -
+      -
+      - Bit
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 20
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-RGB444-1X12:
+
+      - MEDIA_BUS_FMT_RGB444_1X12
+      - 0x1016
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB444-2X8-PADHI-BE:
+
+      - MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE
+      - 0x1001
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - 0
+      - 0
+      - 0
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB444-2X8-PADHI-LE:
+
+      - MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE
+      - 0x1002
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - 0
+      - 0
+      - 0
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB555-2X8-PADHI-BE:
+
+      - MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE
+      - 0x1003
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB555-2X8-PADHI-LE:
+
+      - MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE
+      - 0x1004
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+    * .. _MEDIA-BUS-FMT-RGB565-1X16:
+
+      - MEDIA_BUS_FMT_RGB565_1X16
+      - 0x1017
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-BGR565-2X8-BE:
+
+      - MEDIA_BUS_FMT_BGR565_2X8_BE
+      - 0x1005
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-BGR565-2X8-LE:
+
+      - MEDIA_BUS_FMT_BGR565_2X8_LE
+      - 0x1006
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+    * .. _MEDIA-BUS-FMT-RGB565-2X8-BE:
+
+      - MEDIA_BUS_FMT_RGB565_2X8_BE
+      - 0x1007
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB565-2X8-LE:
+
+      - MEDIA_BUS_FMT_RGB565_2X8_LE
+      - 0x1008
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+    * .. _MEDIA-BUS-FMT-RGB666-1X18:
+
+      - MEDIA_BUS_FMT_RGB666_1X18
+      - 0x1009
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RBG888-1X24:
+
+      - MEDIA_BUS_FMT_RBG888_1X24
+      - 0x100e
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB666-1X24_CPADHI:
+
+      - MEDIA_BUS_FMT_RGB666_1X24_CPADHI
+      - 0x1015
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - 0
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - 0
+      - 0
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - 0
+      - 0
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-BGR888-1X24:
+
+      - MEDIA_BUS_FMT_BGR888_1X24
+      - 0x1013
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-BGR888-3X8:
+
+      - MEDIA_BUS_FMT_BGR888_3X8
+      - 0x101b
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-GBR888-1X24:
+
+      - MEDIA_BUS_FMT_GBR888_1X24
+      - 0x1014
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB888-1X24:
+
+      - MEDIA_BUS_FMT_RGB888_1X24
+      - 0x100a
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB888-2X12-BE:
+
+      - MEDIA_BUS_FMT_RGB888_2X12_BE
+      - 0x100b
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB888-2X12-LE:
+
+      - MEDIA_BUS_FMT_RGB888_2X12_LE
+      - 0x100c
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+    * .. _MEDIA-BUS-FMT-RGB888-3X8:
+
+      - MEDIA_BUS_FMT_RGB888_3X8
+      - 0x101c
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-ARGB888-1X32:
+
+      - MEDIA_BUS_FMT_ARGB888_1X32
+      - 0x100d
+      -
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB888-1X32-PADHI:
+
+      - MEDIA_BUS_FMT_RGB888_1X32_PADHI
+      - 0x100f
+      -
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB101010-1X30:
+
+      - MEDIA_BUS_FMT_RGB101010_1X30
+      - 0x1018
+      -
+      - 0
+      - 0
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+.. raw:: latex
+
+    \endgroup
+
+
+The following table list existing packed 36bit wide RGB formats.
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-rgb-36:
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. flat-table:: 36bit RGB formats
+    :header-rows:  2
+    :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`35` Data organization
+    * -
+      -
+      - Bit
+      - 35
+      - 34
+      - 33
+      - 32
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 20
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-RGB121212-1X36:
+
+      - MEDIA_BUS_FMT_RGB121212_1X36
+      - 0x1019
+      -
+      - r\ :sub:`11`
+      - r\ :sub:`10`
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`11`
+      - b\ :sub:`10`
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+.. raw:: latex
+
+    \endgroup
+
+
+The following table list existing packed 48bit wide RGB formats.
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-rgb-48:
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. flat-table:: 48bit RGB formats
+    :header-rows:  3
+    :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`31` Data organization
+    * -
+      -
+      - Bit
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 47
+      - 46
+      - 45
+      - 44
+      - 43
+      - 42
+      - 41
+      - 40
+      - 39
+      - 38
+      - 37
+      - 36
+      - 35
+      - 34
+      - 33
+      - 32
+    * -
+      -
+      -
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 20
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-RGB161616-1X48:
+
+      - MEDIA_BUS_FMT_RGB161616_1X48
+      - 0x101a
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`15`
+      - r\ :sub:`14`
+      - r\ :sub:`13`
+      - r\ :sub:`12`
+      - r\ :sub:`11`
+      - r\ :sub:`10`
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * -
+      -
+      -
+      - g\ :sub:`15`
+      - g\ :sub:`14`
+      - g\ :sub:`13`
+      - g\ :sub:`12`
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`15`
+      - b\ :sub:`14`
+      - b\ :sub:`13`
+      - b\ :sub:`12`
+      - b\ :sub:`11`
+      - b\ :sub:`10`
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+.. raw:: latex
+
+    \endgroup
+
+On LVDS buses, usually each sample is transferred serialized in seven
+time slots per pixel clock, on three (18-bit) or four (24-bit)
+differential data pairs at the same time. The remaining bits are used
+for control signals as defined by SPWG/PSWG/VESA or JEIDA standards. The
+24-bit RGB format serialized in seven time slots on four lanes using
+JEIDA defined bit mapping will be named
+``MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA``, for example.
+
+.. raw:: latex
+
+    \tiny
+
+.. _v4l2-mbus-pixelcode-rgb-lvds:
+
+.. flat-table:: LVDS RGB formats
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      -
+      -
+      - :cspan:`3` Data organization
+    * -
+      -
+      - Timeslot
+      - Lane
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-RGB666-1X7X3-SPWG:
+
+      - MEDIA_BUS_FMT_RGB666_1X7X3_SPWG
+      - 0x1010
+      - 0
+      -
+      -
+      - d
+      - b\ :sub:`1`
+      - g\ :sub:`0`
+    * -
+      -
+      - 1
+      -
+      -
+      - d
+      - b\ :sub:`0`
+      - r\ :sub:`5`
+    * -
+      -
+      - 2
+      -
+      -
+      - d
+      - g\ :sub:`5`
+      - r\ :sub:`4`
+    * -
+      -
+      - 3
+      -
+      -
+      - b\ :sub:`5`
+      - g\ :sub:`4`
+      - r\ :sub:`3`
+    * -
+      -
+      - 4
+      -
+      -
+      - b\ :sub:`4`
+      - g\ :sub:`3`
+      - r\ :sub:`2`
+    * -
+      -
+      - 5
+      -
+      -
+      - b\ :sub:`3`
+      - g\ :sub:`2`
+      - r\ :sub:`1`
+    * -
+      -
+      - 6
+      -
+      -
+      - b\ :sub:`2`
+      - g\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB888-1X7X4-SPWG:
+
+      - MEDIA_BUS_FMT_RGB888_1X7X4_SPWG
+      - 0x1011
+      - 0
+      -
+      - d
+      - d
+      - b\ :sub:`1`
+      - g\ :sub:`0`
+    * -
+      -
+      - 1
+      -
+      - b\ :sub:`7`
+      - d
+      - b\ :sub:`0`
+      - r\ :sub:`5`
+    * -
+      -
+      - 2
+      -
+      - b\ :sub:`6`
+      - d
+      - g\ :sub:`5`
+      - r\ :sub:`4`
+    * -
+      -
+      - 3
+      -
+      - g\ :sub:`7`
+      - b\ :sub:`5`
+      - g\ :sub:`4`
+      - r\ :sub:`3`
+    * -
+      -
+      - 4
+      -
+      - g\ :sub:`6`
+      - b\ :sub:`4`
+      - g\ :sub:`3`
+      - r\ :sub:`2`
+    * -
+      -
+      - 5
+      -
+      - r\ :sub:`7`
+      - b\ :sub:`3`
+      - g\ :sub:`2`
+      - r\ :sub:`1`
+    * -
+      -
+      - 6
+      -
+      - r\ :sub:`6`
+      - b\ :sub:`2`
+      - g\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB888-1X7X4-JEIDA:
+
+      - MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA
+      - 0x1012
+      - 0
+      -
+      - d
+      - d
+      - b\ :sub:`3`
+      - g\ :sub:`2`
+    * -
+      -
+      - 1
+      -
+      - b\ :sub:`1`
+      - d
+      - b\ :sub:`2`
+      - r\ :sub:`7`
+    * -
+      -
+      - 2
+      -
+      - b\ :sub:`0`
+      - d
+      - g\ :sub:`7`
+      - r\ :sub:`6`
+    * -
+      -
+      - 3
+      -
+      - g\ :sub:`1`
+      - b\ :sub:`7`
+      - g\ :sub:`6`
+      - r\ :sub:`5`
+    * -
+      -
+      - 4
+      -
+      - g\ :sub:`0`
+      - b\ :sub:`6`
+      - g\ :sub:`5`
+      - r\ :sub:`4`
+    * -
+      -
+      - 5
+      -
+      - r\ :sub:`1`
+      - b\ :sub:`5`
+      - g\ :sub:`4`
+      - r\ :sub:`3`
+    * -
+      -
+      - 6
+      -
+      - r\ :sub:`0`
+      - b\ :sub:`4`
+      - g\ :sub:`3`
+      - r\ :sub:`2`
+
+.. raw:: latex
+
+    \normalsize
+
+
+Bayer Formats
+^^^^^^^^^^^^^
+
+Those formats transfer pixel data as red, green and blue components. The
+format code is made of the following information.
+
+-  The red, green and blue components order code, as encoded in a pixel
+   sample. The possible values are shown in :ref:`bayer-patterns`.
+
+-  The number of bits per pixel component. All components are
+   transferred on the same number of bits. Common values are 8, 10 and
+   12.
+
+-  The compression (optional). If the pixel components are ALAW- or
+   DPCM-compressed, a mention of the compression scheme and the number
+   of bits per compressed pixel component.
+
+-  The number of bus samples per pixel. Pixels that are wider than the
+   bus width must be transferred in multiple samples. Common values are
+   1 and 2.
+
+-  The bus width.
+
+-  For formats where the total number of bits per pixel is smaller than
+   the number of bus samples per pixel times the bus width, a padding
+   value stating if the bytes are padded in their most high order bits
+   (PADHI) or low order bits (PADLO).
+
+-  For formats where the number of bus samples per pixel is larger than
+   1, an endianness value stating if the pixel is transferred MSB first
+   (BE) or LSB first (LE).
+
+For instance, a format with uncompressed 10-bit Bayer components
+arranged in a red, green, green, blue pattern transferred as 2 8-bit
+samples per pixel with the least significant bits transferred first will
+be named ``MEDIA_BUS_FMT_SRGGB10_2X8_PADHI_LE``.
+
+
+.. _bayer-patterns:
+
+.. kernel-figure:: bayer.svg
+    :alt:    bayer.svg
+    :align:  center
+
+    **Figure 4.8 Bayer Patterns**
+
+The following table lists existing packed Bayer formats. The data
+organization is given as an example for the first pixel only.
+
+
+.. HACK: ideally, we would be using adjustbox here. However, Sphinx
+.. is a very bad behaviored guy: if the table has more than 30 cols,
+.. it switches to long table, and there's no way to override it.
+
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-bayer:
+
+.. cssclass: longtable
+
+.. flat-table:: Bayer Formats
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`15` Data organization
+    * -
+      -
+      - Bit
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-SBGGR8-1X8:
+
+      - MEDIA_BUS_FMT_SBGGR8_1X8
+      - 0x3001
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGBRG8-1X8:
+
+      - MEDIA_BUS_FMT_SGBRG8_1X8
+      - 0x3013
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGRBG8-1X8:
+
+      - MEDIA_BUS_FMT_SGRBG8_1X8
+      - 0x3002
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SRGGB8-1X8:
+
+      - MEDIA_BUS_FMT_SRGGB8_1X8
+      - 0x3014
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SBGGR10-ALAW8-1X8:
+
+      - MEDIA_BUS_FMT_SBGGR10_ALAW8_1X8
+      - 0x3015
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGBRG10-ALAW8-1X8:
+
+      - MEDIA_BUS_FMT_SGBRG10_ALAW8_1X8
+      - 0x3016
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGRBG10-ALAW8-1X8:
+
+      - MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8
+      - 0x3017
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SRGGB10-ALAW8-1X8:
+
+      - MEDIA_BUS_FMT_SRGGB10_ALAW8_1X8
+      - 0x3018
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SBGGR10-DPCM8-1X8:
+
+      - MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8
+      - 0x300b
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGBRG10-DPCM8-1X8:
+
+      - MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8
+      - 0x300c
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGRBG10-DPCM8-1X8:
+
+      - MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8
+      - 0x3009
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SRGGB10-DPCM8-1X8:
+
+      - MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8
+      - 0x300d
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SBGGR10-2X8-PADHI-BE:
+
+      - MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_BE
+      - 0x3003
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SBGGR10-2X8-PADHI-LE:
+
+      - MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE
+      - 0x3004
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+    * .. _MEDIA-BUS-FMT-SBGGR10-2X8-PADLO-BE:
+
+      - MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_BE
+      - 0x3005
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+    * .. _MEDIA-BUS-FMT-SBGGR10-2X8-PADLO-LE:
+
+      - MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_LE
+      - 0x3006
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+    * .. _MEDIA-BUS-FMT-SBGGR10-1X10:
+
+      - MEDIA_BUS_FMT_SBGGR10_1X10
+      - 0x3007
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGBRG10-1X10:
+
+      - MEDIA_BUS_FMT_SGBRG10_1X10
+      - 0x300e
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGRBG10-1X10:
+
+      - MEDIA_BUS_FMT_SGRBG10_1X10
+      - 0x300a
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SRGGB10-1X10:
+
+      - MEDIA_BUS_FMT_SRGGB10_1X10
+      - 0x300f
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SBGGR12-1X12:
+
+      - MEDIA_BUS_FMT_SBGGR12_1X12
+      - 0x3008
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`11`
+      - b\ :sub:`10`
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGBRG12-1X12:
+
+      - MEDIA_BUS_FMT_SGBRG12_1X12
+      - 0x3010
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGRBG12-1X12:
+
+      - MEDIA_BUS_FMT_SGRBG12_1X12
+      - 0x3011
+      -
+      -
+      -
+      -
+      -
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SRGGB12-1X12:
+
+      - MEDIA_BUS_FMT_SRGGB12_1X12
+      - 0x3012
+      -
+      -
+      -
+      -
+      -
+      - r\ :sub:`11`
+      - r\ :sub:`10`
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SBGGR14-1X14:
+
+      - MEDIA_BUS_FMT_SBGGR14_1X14
+      - 0x3019
+      -
+      -
+      -
+      - b\ :sub:`13`
+      - b\ :sub:`12`
+      - b\ :sub:`11`
+      - b\ :sub:`10`
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGBRG14-1X14:
+
+      - MEDIA_BUS_FMT_SGBRG14_1X14
+      - 0x301a
+      -
+      -
+      -
+      - g\ :sub:`13`
+      - g\ :sub:`12`
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGRBG14-1X14:
+
+      - MEDIA_BUS_FMT_SGRBG14_1X14
+      - 0x301b
+      -
+      -
+      -
+      - g\ :sub:`13`
+      - g\ :sub:`12`
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SRGGB14-1X14:
+
+      - MEDIA_BUS_FMT_SRGGB14_1X14
+      - 0x301c
+      -
+      -
+      -
+      - r\ :sub:`13`
+      - r\ :sub:`12`
+      - r\ :sub:`11`
+      - r\ :sub:`10`
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SBGGR16-1X16:
+
+      - MEDIA_BUS_FMT_SBGGR16_1X16
+      - 0x301d
+      -
+      - b\ :sub:`15`
+      - b\ :sub:`14`
+      - b\ :sub:`13`
+      - b\ :sub:`12`
+      - b\ :sub:`11`
+      - b\ :sub:`10`
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGBRG16-1X16:
+
+      - MEDIA_BUS_FMT_SGBRG16_1X16
+      - 0x301e
+      -
+      - g\ :sub:`15`
+      - g\ :sub:`14`
+      - g\ :sub:`13`
+      - g\ :sub:`12`
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SGRBG16-1X16:
+
+      - MEDIA_BUS_FMT_SGRBG16_1X16
+      - 0x301f
+      -
+      - g\ :sub:`15`
+      - g\ :sub:`14`
+      - g\ :sub:`13`
+      - g\ :sub:`12`
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-SRGGB16-1X16:
+
+      - MEDIA_BUS_FMT_SRGGB16_1X16
+      - 0x3020
+      -
+      - r\ :sub:`15`
+      - r\ :sub:`14`
+      - r\ :sub:`13`
+      - r\ :sub:`12`
+      - r\ :sub:`11`
+      - r\ :sub:`10`
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+
+.. raw:: latex
+
+    \endgroup
+
+
+Packed YUV Formats
+^^^^^^^^^^^^^^^^^^
+
+Those data formats transfer pixel data as (possibly downsampled) Y, U
+and V components. Some formats include dummy bits in some of their
+samples and are collectively referred to as "YDYC" (Y-Dummy-Y-Chroma)
+formats. One cannot rely on the values of these dummy bits as those are
+undefined.
+
+The format code is made of the following information.
+
+-  The Y, U and V components order code, as transferred on the bus.
+   Possible values are YUYV, UYVY, YVYU and VYUY for formats with no
+   dummy bit, and YDYUYDYV, YDYVYDYU, YUYDYVYD and YVYDYUYD for YDYC
+   formats.
+
+-  The number of bits per pixel component. All components are
+   transferred on the same number of bits. Common values are 8, 10 and
+   12.
+
+-  The number of bus samples per pixel. Pixels that are wider than the
+   bus width must be transferred in multiple samples. Common values are
+   0.5 (encoded as 0_5; in this case two pixels are transferred per bus
+   sample), 1, 1.5 (encoded as 1_5) and 2.
+
+-  The bus width. When the bus width is larger than the number of bits
+   per pixel component, several components are packed in a single bus
+   sample. The components are ordered as specified by the order code,
+   with components on the left of the code transferred in the high order
+   bits. Common values are 8 and 16.
+
+For instance, a format where pixels are encoded as 8-bit YUV values
+downsampled to 4:2:2 and transferred as 2 8-bit bus samples per pixel in
+the U, Y, V, Y order will be named ``MEDIA_BUS_FMT_UYVY8_2X8``.
+
+:ref:`v4l2-mbus-pixelcode-yuv8` lists existing packed YUV formats and
+describes the organization of each pixel data in each sample. When a
+format pattern is split across multiple samples each of the samples in
+the pattern is described.
+
+The role of each bit transferred over the bus is identified by one of
+the following codes.
+
+-  y\ :sub:`x` for luma component bit number x
+
+-  u\ :sub:`x` for blue chroma component bit number x
+
+-  v\ :sub:`x` for red chroma component bit number x
+
+-  a\ :sub:`x` for alpha component bit number x
+
+- for non-available bits (for positions higher than the bus width)
+
+-  d for dummy bits
+
+.. HACK: ideally, we would be using adjustbox here. However, this
+.. will never work for this table, as, even with tiny font, it is
+.. to big for a single page. So, we need to manually adjust the
+.. size.
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-yuv8:
+
+.. flat-table:: YUV Formats
+    :header-rows:  2
+    :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`31` Data organization
+    * -
+      -
+      - Bit
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 10
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-Y8-1X8:
+
+      - MEDIA_BUS_FMT_Y8_1X8
+      - 0x2001
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UV8-1X8:
+
+      - MEDIA_BUS_FMT_UV8_1X8
+      - 0x2015
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY8-1_5X8:
+
+      - MEDIA_BUS_FMT_UYVY8_1_5X8
+      - 0x2002
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY8-1_5X8:
+
+      - MEDIA_BUS_FMT_VYUY8_1_5X8
+      - 0x2003
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV8-1_5X8:
+
+      - MEDIA_BUS_FMT_YUYV8_1_5X8
+      - 0x2004
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU8-1_5X8:
+
+      - MEDIA_BUS_FMT_YVYU8_1_5X8
+      - 0x2005
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY8-2X8:
+
+      - MEDIA_BUS_FMT_UYVY8_2X8
+      - 0x2006
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY8-2X8:
+
+      - MEDIA_BUS_FMT_VYUY8_2X8
+      - 0x2007
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV8-2X8:
+
+      - MEDIA_BUS_FMT_YUYV8_2X8
+      - 0x2008
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU8-2X8:
+
+      - MEDIA_BUS_FMT_YVYU8_2X8
+      - 0x2009
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-Y10-1X10:
+
+      - MEDIA_BUS_FMT_Y10_1X10
+      - 0x200a
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-Y10-2X8-PADHI_LE:
+
+      - MEDIA_BUS_FMT_Y10_2X8_PADHI_LE
+      - 0x202c
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - 0
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+    * .. _MEDIA-BUS-FMT-UYVY10-2X10:
+
+      - MEDIA_BUS_FMT_UYVY10_2X10
+      - 0x2018
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY10-2X10:
+
+      - MEDIA_BUS_FMT_VYUY10_2X10
+      - 0x2019
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV10-2X10:
+
+      - MEDIA_BUS_FMT_YUYV10_2X10
+      - 0x200b
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU10-2X10:
+
+      - MEDIA_BUS_FMT_YVYU10_2X10
+      - 0x200c
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-Y12-1X12:
+
+      - MEDIA_BUS_FMT_Y12_1X12
+      - 0x2013
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY12-2X12:
+
+      - MEDIA_BUS_FMT_UYVY12_2X12
+      - 0x201c
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY12-2X12:
+
+      - MEDIA_BUS_FMT_VYUY12_2X12
+      - 0x201d
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV12-2X12:
+
+      - MEDIA_BUS_FMT_YUYV12_2X12
+      - 0x201e
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU12-2X12:
+
+      - MEDIA_BUS_FMT_YVYU12_2X12
+      - 0x201f
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-Y14-1X14:
+
+      - MEDIA_BUS_FMT_Y14_1X14
+      - 0x202d
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`13`
+      - y\ :sub:`12`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY8-1X16:
+
+      - MEDIA_BUS_FMT_UYVY8_1X16
+      - 0x200f
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY8-1X16:
+
+      - MEDIA_BUS_FMT_VYUY8_1X16
+      - 0x2010
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV8-1X16:
+
+      - MEDIA_BUS_FMT_YUYV8_1X16
+      - 0x2011
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU8-1X16:
+
+      - MEDIA_BUS_FMT_YVYU8_1X16
+      - 0x2012
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YDYUYDYV8-1X16:
+
+      - MEDIA_BUS_FMT_YDYUYDYV8_1X16
+      - 0x2014
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY10-1X20:
+
+      - MEDIA_BUS_FMT_UYVY10_1X20
+      - 0x201a
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY10-1X20:
+
+      - MEDIA_BUS_FMT_VYUY10_1X20
+      - 0x201b
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV10-1X20:
+
+      - MEDIA_BUS_FMT_YUYV10_1X20
+      - 0x200d
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU10-1X20:
+
+      - MEDIA_BUS_FMT_YVYU10_1X20
+      - 0x200e
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VUY8-1X24:
+
+      - MEDIA_BUS_FMT_VUY8_1X24
+      - 0x201a
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUV8-1X24:
+
+      - MEDIA_BUS_FMT_YUV8_1X24
+      - 0x2025
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYYVYY8-0-5X24:
+
+      - MEDIA_BUS_FMT_UYYVYY8_0_5X24
+      - 0x2026
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY12-1X24:
+
+      - MEDIA_BUS_FMT_UYVY12_1X24
+      - 0x2020
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY12-1X24:
+
+      - MEDIA_BUS_FMT_VYUY12_1X24
+      - 0x2021
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV12-1X24:
+
+      - MEDIA_BUS_FMT_YUYV12_1X24
+      - 0x2022
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU12-1X24:
+
+      - MEDIA_BUS_FMT_YVYU12_1X24
+      - 0x2023
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUV10-1X30:
+
+      - MEDIA_BUS_FMT_YUV10_1X30
+      - 0x2016
+      -
+      -
+      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYYVYY10-0-5X30:
+
+      - MEDIA_BUS_FMT_UYYVYY10_0_5X30
+      - 0x2027
+      -
+      -
+      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-AYUV8-1X32:
+
+      - MEDIA_BUS_FMT_AYUV8_1X32
+      - 0x2017
+      -
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+
+
+.. raw:: latex
+
+	\endgroup
+
+
+The following table list existing packed 36bit wide YUV formats.
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-yuv8-36bit:
+
+.. flat-table:: 36bit YUV Formats
+    :header-rows:  2
+    :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`35` Data organization
+    * -
+      -
+      - Bit
+      - 35
+      - 34
+      - 33
+      - 32
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 10
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-UYYVYY12-0-5X36:
+
+      - MEDIA_BUS_FMT_UYYVYY12_0_5X36
+      - 0x2028
+      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUV12-1X36:
+
+      - MEDIA_BUS_FMT_YUV12_1X36
+      - 0x2029
+      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+
+
+.. raw:: latex
+
+	\endgroup
+
+
+The following table list existing packed 48bit wide YUV formats.
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-yuv8-48bit:
+
+.. flat-table:: 48bit YUV Formats
+    :header-rows:  3
+    :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`31` Data organization
+    * -
+      -
+      - Bit
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 47
+      - 46
+      - 45
+      - 44
+      - 43
+      - 42
+      - 41
+      - 40
+      - 39
+      - 38
+      - 37
+      - 36
+      - 35
+      - 34
+      - 33
+      - 32
+    * -
+      -
+      -
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 10
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-YUV16-1X48:
+
+      - MEDIA_BUS_FMT_YUV16_1X48
+      - 0x202a
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`8`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      - u\ :sub:`15`
+      - u\ :sub:`14`
+      - u\ :sub:`13`
+      - u\ :sub:`12`
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - v\ :sub:`15`
+      - v\ :sub:`14`
+      - v\ :sub:`13`
+      - v\ :sub:`12`
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYYVYY16-0-5X48:
+
+      - MEDIA_BUS_FMT_UYYVYY16_0_5X48
+      - 0x202b
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`15`
+      - u\ :sub:`14`
+      - u\ :sub:`13`
+      - u\ :sub:`12`
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`8`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`15`
+      - v\ :sub:`14`
+      - v\ :sub:`13`
+      - v\ :sub:`12`
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`8`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+
+
+.. raw:: latex
+
+	\endgroup
+
+HSV/HSL Formats
+^^^^^^^^^^^^^^^
+
+Those formats transfer pixel data as RGB values in a
+cylindrical-coordinate system using Hue-Saturation-Value or
+Hue-Saturation-Lightness components. The format code is made of the
+following information.
+
+-  The hue, saturation, value or lightness and optional alpha components
+   order code, as encoded in a pixel sample. The only currently
+   supported value is AHSV.
+
+-  The number of bits per component, for each component. The values can
+   be different for all components. The only currently supported value
+   is 8888.
+
+-  The number of bus samples per pixel. Pixels that are wider than the
+   bus width must be transferred in multiple samples. The only currently
+   supported value is 1.
+
+-  The bus width.
+
+-  For formats where the total number of bits per pixel is smaller than
+   the number of bus samples per pixel times the bus width, a padding
+   value stating if the bytes are padded in their most high order bits
+   (PADHI) or low order bits (PADLO).
+
+-  For formats where the number of bus samples per pixel is larger than
+   1, an endianness value stating if the pixel is transferred MSB first
+   (BE) or LSB first (LE).
+
+The following table lists existing HSV/HSL formats.
+
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{3.9cm}|p{0.73cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-hsv:
+
+.. flat-table:: HSV/HSL formats
+    :header-rows:  2
+    :stub-columns: 0
+    :widths: 28 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`31` Data organization
+    * -
+      -
+      - Bit
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 20
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-AHSV8888-1X32:
+
+      - MEDIA_BUS_FMT_AHSV8888_1X32
+      - 0x6001
+      -
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+      - h\ :sub:`7`
+      - h\ :sub:`6`
+      - h\ :sub:`5`
+      - h\ :sub:`4`
+      - h\ :sub:`3`
+      - h\ :sub:`2`
+      - h\ :sub:`1`
+      - h\ :sub:`0`
+      - s\ :sub:`7`
+      - s\ :sub:`6`
+      - s\ :sub:`5`
+      - s\ :sub:`4`
+      - s\ :sub:`3`
+      - s\ :sub:`2`
+      - s\ :sub:`1`
+      - s\ :sub:`0`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+
+.. raw:: latex
+
+    \normalsize
+
+
+JPEG Compressed Formats
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Those data formats consist of an ordered sequence of 8-bit bytes
+obtained from JPEG compression process. Additionally to the ``_JPEG``
+postfix the format code is made of the following information.
+
+-  The number of bus samples per entropy encoded byte.
+
+-  The bus width.
+
+For instance, for a JPEG baseline process and an 8-bit bus width the
+format will be named ``MEDIA_BUS_FMT_JPEG_1X8``.
+
+The following table lists existing JPEG compressed formats.
+
+
+.. _v4l2-mbus-pixelcode-jpeg:
+
+.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{10.1cm}|
+
+.. flat-table:: JPEG Formats
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      - Remarks
+    * .. _MEDIA-BUS-FMT-JPEG-1X8:
+
+      - MEDIA_BUS_FMT_JPEG_1X8
+      - 0x4001
+      - Besides of its usage for the parallel bus this format is
+	recommended for transmission of JPEG data over MIPI CSI bus using
+	the User Defined 8-bit Data types.
+
+
+
+.. _v4l2-mbus-vendor-spec-fmts:
+
+Vendor and Device Specific Formats
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This section lists complex data formats that are either vendor or device
+specific.
+
+The following table lists the existing vendor and device specific
+formats.
+
+
+.. _v4l2-mbus-pixelcode-vendor-specific:
+
+.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}|
+
+.. flat-table:: Vendor and device specific formats
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      - Comments
+    * .. _MEDIA-BUS-FMT-S5C-UYVY-JPEG-1X8:
+
+      - MEDIA_BUS_FMT_S5C_UYVY_JPEG_1X8
+      - 0x5001
+      - Interleaved raw UYVY and JPEG image format with embedded meta-data
+	used by Samsung S3C73MX camera sensors.
diff --git a/Documentation/userspace-api/media/v4l/subdev-image-processing-crop.svg b/Documentation/userspace-api/media/v4l/subdev-image-processing-crop.svg
new file mode 100644
index 000000000000..109bbcebd3b4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/subdev-image-processing-crop.svg
@@ -0,0 +1,312 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="42.799767cm"
+   height="9.9348345cm"
+   viewBox="-194 128 840.06984 194.72276"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   sodipodi:docname="subdev-image-processing-crop.svg">
+  <metadata
+     id="metadata100">
+    <rdf:RDF>
+      <cc:Work
+	 rdf:about="">
+	<dc:format>image/svg+xml</dc:format>
+	<dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+	<dc:title />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs98" />
+  <sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview96"
+     showgrid="false"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     inkscape:zoom="0.3649199"
+     inkscape:cx="764.40286"
+     inkscape:cy="176.91347"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="svg2" />
+  <rect
+     style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+     x="-9.6002426"
+     y="128.86047"
+     width="469.77399"
+     height="193"
+     id="rect4" />
+  <g
+     id="g6"
+     transform="translate(-1.6002426,-1.1395339)">
+    <rect
+       style="fill:#ffffff"
+       x="4.5"
+       y="189"
+       width="159"
+       height="104"
+       id="rect8" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#a52a2a;stroke-width:2"
+       x="4.5"
+       y="189"
+       width="159"
+       height="104"
+       id="rect10" />
+  </g>
+  <g
+     id="g12"
+     transform="translate(-1.6002426,-1.1395339)">
+    <rect
+       style="fill:#ffffff"
+       x="63.5"
+       y="211"
+       width="94"
+       height="77"
+       id="rect14" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
+       x="63.5"
+       y="211"
+       width="94"
+       height="77"
+       id="rect16" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#0000ff"
+     x="72.899757"
+     y="226.61047"
+     id="text18">
+    <tspan
+       x="72.899757"
+       y="226.61047"
+       id="tspan20">sink</tspan>
+    <tspan
+       x="72.899757"
+       y="242.61047"
+       id="tspan22">crop</tspan>
+    <tspan
+       x="72.899757"
+       y="258.61047"
+       id="tspan24">selection</tspan>
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="27.899757"
+     y="156.86047"
+     id="text26">
+    <tspan
+       x="27.899757"
+       y="156.86047"
+       id="tspan28" />
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a52a2a"
+     x="6.938117"
+     y="156.77448"
+     id="text30">
+    <tspan
+       x="6.938117"
+       y="156.77448"
+       id="tspan32">sink media</tspan>
+    <tspan
+       x="6.938117"
+       y="172.77448"
+       id="tspan34">bus format</tspan>
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#8b6914"
+     x="348.17374"
+     y="153.86047"
+     id="text36">
+    <tspan
+       x="348.17374"
+       y="153.86047"
+       id="tspan38">source media</tspan>
+    <tspan
+       x="348.17374"
+       y="169.86047"
+       id="tspan40">bus format</tspan>
+  </text>
+  <g
+     id="g42"
+     transform="translate(-1.6002426,-1.1395339)">
+    <rect
+       style="fill:#ffffff"
+       x="350.48801"
+       y="190.834"
+       width="93.286301"
+       height="75.166"
+       id="rect44" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
+       x="350.48801"
+       y="190.834"
+       width="93.286301"
+       height="75.166"
+       id="rect46" />
+  </g>
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="348.88776"
+     y1="264.86047"
+     x2="61.899757"
+     y2="286.86047"
+     id="line48" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="348.88776"
+     y1="189.69447"
+     x2="61.899757"
+     y2="209.86047"
+     id="line50" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="442.17374"
+     y1="264.86047"
+     x2="155.89977"
+     y2="286.86047"
+     id="line52" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="442.17374"
+     y1="189.69447"
+     x2="155.89977"
+     y2="209.86047"
+     id="line54" />
+  <g
+     id="g56"
+     transform="translate(-1.6002426,-1.1395339)">
+    <circle
+       style="fill:#ffffff"
+       cx="473.10001"
+       cy="219.98399"
+       id="ellipse58"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="473.10001"
+       cy="219.98399"
+       id="ellipse60"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="473.10001"
+       cy="219.98399"
+       id="ellipse62"
+       r="8.5" />
+  </g>
+  <g
+     id="g64"
+     transform="translate(-1.6002426,-1.1395339)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       x1="481.60001"
+       y1="219.98399"
+       x2="637.93402"
+       y2="220.01199"
+       id="line66" />
+    <polygon
+       style="fill:#000000"
+       points="635.435,215.012 645.434,220.014 635.433,225.012 637.934,220.012 "
+       id="polygon68" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       points="635.435,215.012 645.434,220.014 635.433,225.012 637.934,220.012 "
+       id="polygon70" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="505.30774"
+     y="208.66048"
+     id="text72">
+    <tspan
+       x="505.30774"
+       y="208.66048"
+       id="tspan74">pad 1 (source)</tspan>
+  </text>
+  <g
+     id="g76"
+     transform="translate(-1.6002426,-1.1395339)">
+    <circle
+       style="fill:#ffffff"
+       cx="-20.398199"
+       cy="241.51199"
+       id="ellipse78"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="-20.398199"
+       cy="241.51199"
+       id="ellipse80"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="-20.398199"
+       cy="241.51199"
+       id="ellipse82"
+       r="8.5" />
+  </g>
+  <g
+     id="g84"
+     transform="translate(-1.6002426,-1.1395339)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       x1="-192.39799"
+       y1="241.8"
+       x2="-38.6343"
+       y2="241.52901"
+       id="line86" />
+    <polygon
+       style="fill:#000000"
+       points="-41.1431,236.534 -31.1343,241.516 -41.1254,246.534 -38.6343,241.529 "
+       id="polygon88" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       points="-41.1431,236.534 -31.1343,241.516 -41.1254,246.534 -38.6343,241.529 "
+       id="polygon90" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="-149.45824"
+     y="228.66048"
+     id="text92">
+    <tspan
+       x="-149.45824"
+       y="228.66048"
+       id="tspan94">pad 0 (sink)</tspan>
+  </text>
+</svg>
diff --git a/Documentation/userspace-api/media/v4l/subdev-image-processing-full.svg b/Documentation/userspace-api/media/v4l/subdev-image-processing-full.svg
new file mode 100644
index 000000000000..cfdb7532d5b6
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/subdev-image-processing-full.svg
@@ -0,0 +1,752 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="58.825298cm"
+   height="17.279287cm"
+   viewBox="-186 71 1174.5119 332.1463"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   sodipodi:docname="subdev-image-processing-full.svg">
+  <metadata
+     id="metadata260">
+    <rdf:RDF>
+      <cc:Work
+	 rdf:about="">
+	<dc:format>image/svg+xml</dc:format>
+	<dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+	<dc:title />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs258" />
+  <sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview256"
+     showgrid="false"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     inkscape:zoom="0.26595857"
+     inkscape:cx="1050.1367"
+     inkscape:cy="307.01645"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="svg2" />
+  <g
+     id="g4"
+     transform="translate(-1.4982376,-7.6949076)">
+    <rect
+       style="fill:#ffffff"
+       x="318.89999"
+       y="129"
+       width="208.10001"
+       height="249"
+       id="rect6" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#ff765a;stroke-width:2"
+       x="318.89999"
+       y="129"
+       width="208.10001"
+       height="249"
+       id="rect8" />
+  </g>
+  <rect
+     style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+     x="-3.4982376"
+     y="65.305092"
+     width="806"
+     height="343"
+     id="rect10" />
+  <g
+     id="g12"
+     transform="translate(-1.4982376,-7.6949076)">
+    <circle
+       style="fill:#ffffff"
+       cx="-12.5"
+       cy="166.71201"
+       id="ellipse14"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="-12.5"
+       cy="166.71201"
+       id="ellipse16"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="-12.5"
+       cy="166.71201"
+       id="ellipse18"
+       r="8.5" />
+  </g>
+  <g
+     id="g20"
+     transform="translate(-1.4982376,-7.6949076)">
+    <circle
+       style="fill:#ffffff"
+       cx="815.23199"
+       cy="205.18401"
+       id="ellipse22"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="815.23199"
+       cy="205.18401"
+       id="ellipse24"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="815.23199"
+       cy="205.18401"
+       id="ellipse26"
+       r="8.5" />
+  </g>
+  <g
+     id="g28"
+     transform="translate(-1.4982376,-7.6949076)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       x1="-184.5"
+       y1="167"
+       x2="-30.736099"
+       y2="166.729"
+       id="line30" />
+    <polygon
+       style="fill:#000000"
+       points="-33.2449,161.734 -23.2361,166.716 -33.2272,171.734 -30.7361,166.729 "
+       id="polygon32" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       points="-33.2449,161.734 -23.2361,166.716 -33.2272,171.734 -30.7361,166.729 "
+       id="polygon34" />
+  </g>
+  <g
+     id="g36"
+     transform="translate(-1.4982376,-7.6949076)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       x1="823.73199"
+       y1="205.18401"
+       x2="980.06598"
+       y2="205.21201"
+       id="line38" />
+    <polygon
+       style="fill:#000000"
+       points="977.567,200.212 987.566,205.214 977.565,210.212 980.066,205.212 "
+       id="polygon40" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       points="977.567,200.212 987.566,205.214 977.565,210.212 980.066,205.212 "
+       id="polygon42" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="-141.45824"
+     y="147.3051"
+     id="text44">
+    <tspan
+       x="-141.45824"
+       y="147.3051"
+       id="tspan46">pad 0 (sink)</tspan>
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="847.54175"
+     y="187.3051"
+     id="text48">
+    <tspan
+       x="847.54175"
+       y="187.3051"
+       id="tspan50">pad 2 (source)</tspan>
+  </text>
+  <g
+     id="g52"
+     transform="translate(-1.4982376,-7.6949076)">
+    <rect
+       style="fill:#ffffff"
+       x="5.5"
+       y="120"
+       width="159"
+       height="104"
+       id="rect54" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#a52a2a;stroke-width:2"
+       x="5.5"
+       y="120"
+       width="159"
+       height="104"
+       id="rect56" />
+  </g>
+  <g
+     id="g58"
+     transform="translate(-1.4982376,-7.6949076)">
+    <rect
+       style="fill:#ffffff"
+       x="62.5"
+       y="136"
+       width="94"
+       height="77"
+       id="rect60" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
+       x="62.5"
+       y="136"
+       width="94"
+       height="77"
+       id="rect62" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="29.001762"
+     y="81.305092"
+     id="text64">
+    <tspan
+       x="29.001762"
+       y="81.305092"
+       id="tspan66" />
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a52a2a"
+     x="8.040122"
+     y="81.218895"
+     id="text68">
+    <tspan
+       x="8.040122"
+       y="81.218895"
+       id="tspan70">sink media</tspan>
+    <tspan
+       x="8.040122"
+       y="97.219093"
+       id="tspan72">bus format</tspan>
+  </text>
+  <g
+     id="g74"
+     transform="translate(-1.4982376,-7.6949076)">
+    <rect
+       style="fill:#ffffff"
+       x="333.64401"
+       y="185.64999"
+       width="165.2"
+       height="172.478"
+       id="rect76" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#00ff00;stroke-width:2"
+       x="333.64401"
+       y="185.64999"
+       width="165.2"
+       height="172.478"
+       id="rect78" />
+  </g>
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="332.14578"
+     y1="350.43307"
+     x2="61.001762"
+     y2="205.3051"
+     id="line80" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="332.14578"
+     y1="177.95509"
+     x2="61.001762"
+     y2="128.3051"
+     id="line82" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="497.34576"
+     y1="350.43307"
+     x2="155.00177"
+     y2="205.3051"
+     id="line84" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="497.34576"
+     y1="177.95509"
+     x2="155.00177"
+     y2="128.3051"
+     id="line86" />
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#00ff00"
+     x="333.20578"
+     y="141.7471"
+     id="text88">
+    <tspan
+       x="333.20578"
+       y="141.7471"
+       id="tspan90">sink compose</tspan>
+    <tspan
+       x="333.20578"
+       y="157.7471"
+       id="tspan92">selection (scaling)</tspan>
+  </text>
+  <g
+     id="g94"
+     transform="translate(-1.4982376,-7.6949076)">
+    <rect
+       style="fill:#ffffff"
+       x="409.32199"
+       y="194.565"
+       width="100.186"
+       height="71.452301"
+       id="rect96" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       x="409.32199"
+       y="194.565"
+       width="100.186"
+       height="71.452301"
+       id="rect98" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#8b6914"
+     x="688.00177"
+     y="97.43309"
+     id="text100">
+    <tspan
+       x="688.00177"
+       y="97.43309"
+       id="tspan102">source media</tspan>
+    <tspan
+       x="688.00177"
+       y="113.43309"
+       id="tspan104">bus format</tspan>
+  </text>
+  <g
+     id="g106"
+     transform="translate(-1.4982376,-7.6949076)">
+    <rect
+       style="fill:#ffffff"
+       x="688.48798"
+       y="173.834"
+       width="100.186"
+       height="71.452301"
+       id="rect108" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
+       x="688.48798"
+       y="173.834"
+       width="100.186"
+       height="71.452301"
+       id="rect110" />
+  </g>
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="686.98975"
+     y1="237.59109"
+     x2="407.82376"
+     y2="258.32309"
+     id="line112" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="686.98975"
+     y1="166.1391"
+     x2="407.82376"
+     y2="186.8701"
+     id="line114" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="787.17578"
+     y1="237.59109"
+     x2="508.00977"
+     y2="258.32309"
+     id="line116" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="787.17578"
+     y1="166.1391"
+     x2="508.00977"
+     y2="186.8701"
+     id="line118" />
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#ff765a"
+     x="323.50177"
+     y="95.305092"
+     id="text120">
+    <tspan
+       x="323.50177"
+       y="95.305092"
+       id="tspan122">sink compose</tspan>
+    <tspan
+       x="323.50177"
+       y="111.30509"
+       id="tspan124">bounds selection</tspan>
+  </text>
+  <g
+     id="g126"
+     transform="translate(-1.4982376,-7.6949076)">
+    <circle
+       style="fill:#ffffff"
+       cx="-12.0982"
+       cy="341.51199"
+       id="ellipse128"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="-12.0982"
+       cy="341.51199"
+       id="ellipse130"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="-12.0982"
+       cy="341.51199"
+       id="ellipse132"
+       r="8.5" />
+  </g>
+  <g
+     id="g134"
+     transform="translate(-1.4982376,-7.6949076)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       x1="-184.09801"
+       y1="341.79999"
+       x2="-30.334299"
+       y2="341.52899"
+       id="line136" />
+    <polygon
+       style="fill:#000000"
+       points="-32.8431,336.534 -22.8343,341.516 -32.8254,346.534 -30.3343,341.529 "
+       id="polygon138" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       points="-32.8431,336.534 -22.8343,341.516 -32.8254,346.534 -30.3343,341.529 "
+       id="polygon140" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="-140.49823"
+     y="321.30508"
+     id="text142">
+    <tspan
+       x="-140.49823"
+       y="321.30508"
+       id="tspan144">pad 1 (sink)</tspan>
+  </text>
+  <g
+     id="g146"
+     transform="translate(-1.4982376,-7.6949076)">
+    <rect
+       style="fill:#ffffff"
+       x="7.8082399"
+       y="292.79999"
+       width="112.092"
+       height="82.199997"
+       id="rect148" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#a52a2a;stroke-width:2"
+       x="7.8082399"
+       y="292.79999"
+       width="112.092"
+       height="82.199997"
+       id="rect150" />
+  </g>
+  <g
+     id="g152"
+     transform="translate(-1.4982376,-7.6949076)">
+    <rect
+       style="fill:#ffffff"
+       x="52.900002"
+       y="314.79999"
+       width="58.099998"
+       height="50.200001"
+       id="rect154" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
+       x="52.900002"
+       y="314.79999"
+       width="58.099998"
+       height="50.200001"
+       id="rect156" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="30.401762"
+     y="252.10509"
+     id="text158">
+    <tspan
+       x="30.401762"
+       y="252.10509"
+       id="tspan160" />
+  </text>
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="357.40176"
+     y1="244.20509"
+     x2="51.401764"
+     y2="307.10507"
+     id="line162" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="357.40176"
+     y1="308.30508"
+     x2="51.401764"
+     y2="357.30508"
+     id="line164" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="432.50177"
+     y1="308.30508"
+     x2="109.50176"
+     y2="357.30508"
+     id="line166" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="432.50177"
+     y1="244.20509"
+     x2="109.50176"
+     y2="307.10507"
+     id="line168" />
+  <rect
+     style="fill:none;fill-opacity:0;stroke:#00ff00;stroke-width:2"
+     x="357.40176"
+     y="244.20509"
+     width="75.099998"
+     height="64.099998"
+     id="rect170" />
+  <rect
+     style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+     x="441.76376"
+     y="276.77109"
+     width="64.737999"
+     height="48.534"
+     id="rect172" />
+  <g
+     id="g174"
+     transform="translate(-1.4982376,-7.6949076)">
+    <rect
+       style="fill:#ffffff"
+       x="693.42798"
+       y="324.73401"
+       width="63.571999"
+       height="49.265999"
+       id="rect176" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
+       x="693.42798"
+       y="324.73401"
+       width="63.571999"
+       height="49.265999"
+       id="rect178" />
+  </g>
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="691.92975"
+     y1="366.30508"
+     x2="441.76376"
+     y2="325.30508"
+     id="line180" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="691.92975"
+     y1="317.03909"
+     x2="441.76376"
+     y2="276.77109"
+     id="line182" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="755.50177"
+     y1="366.30508"
+     x2="506.50177"
+     y2="325.30508"
+     id="line184" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="755.50177"
+     y1="317.03909"
+     x2="506.50177"
+     y2="276.77109"
+     id="line186" />
+  <g
+     id="g188"
+     transform="translate(-1.4982376,-7.6949076)">
+    <circle
+       style="fill:#ffffff"
+       cx="815.44"
+       cy="343.98401"
+       id="ellipse190"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="815.44"
+       cy="343.98401"
+       id="ellipse192"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="815.44"
+       cy="343.98401"
+       id="ellipse194"
+       r="8.5" />
+  </g>
+  <g
+     id="g196"
+     transform="translate(-1.4982376,-7.6949076)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       x1="823.94"
+       y1="343.98401"
+       x2="980.27399"
+       y2="344.01199"
+       id="line198" />
+    <polygon
+       style="fill:#000000"
+       points="977.775,339.012 987.774,344.014 977.773,349.012 980.274,344.012 "
+       id="polygon200" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       points="977.775,339.012 987.774,344.014 977.773,349.012 980.274,344.012 "
+       id="polygon202" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="847.74976"
+     y="326.10507"
+     id="text204">
+    <tspan
+       x="847.74976"
+       y="326.10507"
+       id="tspan206">pad 3 (source)</tspan>
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#0000ff"
+     x="195.50177"
+     y="83.305092"
+     id="text208">
+    <tspan
+       x="195.50177"
+       y="83.305092"
+       id="tspan210">sink</tspan>
+    <tspan
+       x="195.50177"
+       y="99.305092"
+       id="tspan212">crop</tspan>
+    <tspan
+       x="195.50177"
+       y="115.30509"
+       id="tspan214">selection</tspan>
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a020f0"
+     x="551.50177"
+     y="87.305092"
+     id="text216">
+    <tspan
+       x="551.50177"
+       y="87.305092"
+       id="tspan218">source</tspan>
+    <tspan
+       x="551.50177"
+       y="103.30509"
+       id="tspan220">crop</tspan>
+    <tspan
+       x="551.50177"
+       y="119.30509"
+       id="tspan222">selection</tspan>
+  </text>
+  <g
+     id="g224"
+     transform="translate(-1.4982376,-7.6949076)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
+       x1="211"
+       y1="132"
+       x2="166.21001"
+       y2="135.287"
+       id="line226" />
+    <polygon
+       style="fill:#0000ff"
+       points="169.069,140.091 158.73,135.836 168.337,130.118 166.21,135.287 "
+       id="polygon228" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
+       points="169.069,140.091 158.73,135.836 168.337,130.118 166.21,135.287 "
+       id="polygon230" />
+  </g>
+  <g
+     id="g232"
+     transform="translate(-1.4982376,-7.6949076)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
+       x1="209"
+       y1="131"
+       x2="115.581"
+       y2="306.20901"
+       id="line234" />
+    <polygon
+       style="fill:#0000ff"
+       points="121.169,306.355 112.052,312.827 112.345,301.65 115.581,306.209 "
+       id="polygon236" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
+       points="121.169,306.355 112.052,312.827 112.345,301.65 115.581,306.209 "
+       id="polygon238" />
+  </g>
+  <g
+     id="g240"
+     transform="translate(-1.4982376,-7.6949076)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       x1="550.492"
+       y1="133.214"
+       x2="514.91602"
+       y2="186.46899"
+       id="line242" />
+    <polygon
+       style="fill:#a020f0"
+       points="520.463,187.168 510.75,192.706 512.147,181.613 514.916,186.469 "
+       id="polygon244" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       points="520.463,187.168 510.75,192.706 512.147,181.613 514.916,186.469 "
+       id="polygon246" />
+  </g>
+  <g
+     id="g248"
+     transform="translate(-1.4982376,-7.6949076)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       x1="550.07202"
+       y1="133.787"
+       x2="510.61801"
+       y2="275.08899"
+       id="line250" />
+    <polygon
+       style="fill:#a020f0"
+       points="516.106,274.025 508.601,282.312 506.475,271.336 510.618,275.089 "
+       id="polygon252" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       points="516.106,274.025 508.601,282.312 506.475,271.336 510.618,275.089 "
+       id="polygon254" />
+  </g>
+</svg>
diff --git a/Documentation/userspace-api/media/v4l/subdev-image-processing-scaling-multi-source.svg b/Documentation/userspace-api/media/v4l/subdev-image-processing-scaling-multi-source.svg
new file mode 100644
index 000000000000..f7f1379d30a6
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/subdev-image-processing-scaling-multi-source.svg
@@ -0,0 +1,550 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="58.803326cm"
+   height="16.463955cm"
+   viewBox="-194 128 1175.0698 319.59442"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   sodipodi:docname="subdev-image-processing-scaling-multi-source.svg">
+  <metadata
+     id="metadata186">
+    <rdf:RDF>
+      <cc:Work
+	 rdf:about="">
+	<dc:format>image/svg+xml</dc:format>
+	<dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+	<dc:title />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs184" />
+  <sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview182"
+     showgrid="false"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     inkscape:zoom="0.26595857"
+     inkscape:cx="1049.9581"
+     inkscape:cy="292.5708"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="svg2" />
+  <rect
+     style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+     x="-9.6002426"
+     y="124.14409"
+     width="806"
+     height="327"
+     id="rect4" />
+  <g
+     id="g6"
+     transform="translate(-1.6002426,-5.8559115)">
+    <rect
+       style="fill:#ffffff"
+       x="4.5"
+       y="189"
+       width="159"
+       height="104"
+       id="rect8" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#a52a2a;stroke-width:2"
+       x="4.5"
+       y="189"
+       width="159"
+       height="104"
+       id="rect10" />
+  </g>
+  <g
+     id="g12"
+     transform="translate(-1.6002426,-5.8559115)">
+    <rect
+       style="fill:#ffffff"
+       x="49.5"
+       y="204"
+       width="94"
+       height="77"
+       id="rect14" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#0000ff;stroke-width:2"
+       x="49.5"
+       y="204"
+       width="94"
+       height="77"
+       id="rect16" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#0000ff"
+     x="58.399757"
+     y="218.14409"
+     id="text18">
+    <tspan
+       x="58.399757"
+       y="218.14409"
+       id="tspan20">sink</tspan>
+    <tspan
+       x="58.399757"
+       y="234.14409"
+       id="tspan22">crop</tspan>
+    <tspan
+       x="58.399757"
+       y="250.14409"
+       id="tspan24">selection</tspan>
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="27.899757"
+     y="152.14409"
+     id="text26">
+    <tspan
+       x="27.899757"
+       y="152.14409"
+       id="tspan28" />
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a52a2a"
+     x="6.938117"
+     y="152.05809"
+     id="text30">
+    <tspan
+       x="6.938117"
+       y="152.05809"
+       id="tspan32">sink media</tspan>
+    <tspan
+       x="6.938117"
+       y="168.05809"
+       id="tspan34">bus format</tspan>
+  </text>
+  <g
+     id="g36"
+     transform="translate(-1.6002426,-5.8559115)">
+    <rect
+       style="fill:#ffffff"
+       x="333.64401"
+       y="185.64999"
+       width="165.2"
+       height="172.478"
+       id="rect38" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#00ff00;stroke-width:2"
+       x="333.64401"
+       y="185.64999"
+       width="165.2"
+       height="172.478"
+       id="rect40" />
+  </g>
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="332.04376"
+     y1="352.27206"
+     x2="47.899757"
+     y2="275.14407"
+     id="line42" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="332.04376"
+     y1="179.79408"
+     x2="47.899757"
+     y2="198.14409"
+     id="line44" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="497.24374"
+     y1="352.27206"
+     x2="141.89977"
+     y2="275.14407"
+     id="line46" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="497.24374"
+     y1="179.79408"
+     x2="141.89977"
+     y2="198.14409"
+     id="line48" />
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#00ff00"
+     x="333.10376"
+     y="143.58609"
+     id="text50">
+    <tspan
+       x="333.10376"
+       y="143.58609"
+       id="tspan52">sink compose</tspan>
+    <tspan
+       x="333.10376"
+       y="159.58609"
+       id="tspan54">selection (scaling)</tspan>
+  </text>
+  <g
+     id="g56"
+     transform="translate(-1.6002426,-5.8559115)">
+    <rect
+       style="fill:#ffffff"
+       x="382.32199"
+       y="199.565"
+       width="100.186"
+       height="71.452301"
+       id="rect58" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       x="382.32199"
+       y="199.565"
+       width="100.186"
+       height="71.452301"
+       id="rect60" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#a020f0"
+     x="541.7218"
+     y="143.58609"
+     id="text62">
+    <tspan
+       x="541.7218"
+       y="143.58609"
+       id="tspan64">source</tspan>
+    <tspan
+       x="541.7218"
+       y="159.58609"
+       id="tspan66">crop</tspan>
+    <tspan
+       x="541.7218"
+       y="175.58609"
+       id="tspan68">selection</tspan>
+  </text>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#8b6914"
+     x="689.89978"
+     y="151.27209"
+     id="text70">
+    <tspan
+       x="689.89978"
+       y="151.27209"
+       id="tspan72">source media</tspan>
+    <tspan
+       x="689.89978"
+       y="167.27209"
+       id="tspan74">bus format</tspan>
+  </text>
+  <g
+     id="g76"
+     transform="translate(-1.6002426,-5.8559115)">
+    <rect
+       style="fill:#ffffff"
+       x="690.48798"
+       y="225.834"
+       width="100.186"
+       height="71.452301"
+       id="rect78" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
+       x="690.48798"
+       y="225.834"
+       width="100.186"
+       height="71.452301"
+       id="rect80" />
+  </g>
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="688.88776"
+     y1="291.43008"
+     x2="380.72174"
+     y2="265.16208"
+     id="line82" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="688.88776"
+     y1="219.97809"
+     x2="380.72174"
+     y2="193.70909"
+     id="line84" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="789.07379"
+     y1="291.43008"
+     x2="480.90775"
+     y2="265.16208"
+     id="line86" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="789.07379"
+     y1="219.97809"
+     x2="480.90775"
+     y2="193.70909"
+     id="line88" />
+  <g
+     id="g90"
+     transform="translate(-1.6002426,-5.8559115)">
+    <circle
+       style="fill:#ffffff"
+       cx="808.09998"
+       cy="249.98399"
+       id="ellipse92"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="808.09998"
+       cy="249.98399"
+       id="ellipse94"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="808.09998"
+       cy="249.98399"
+       id="ellipse96"
+       r="8.5" />
+  </g>
+  <g
+     id="g98"
+     transform="translate(-1.6002426,-5.8559115)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       x1="816.59998"
+       y1="249.98399"
+       x2="972.93402"
+       y2="250.01199"
+       id="line100" />
+    <polygon
+       style="fill:#000000"
+       points="970.435,245.012 980.434,250.014 970.433,255.012 972.934,250.012 "
+       id="polygon102" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       points="970.435,245.012 980.434,250.014 970.433,255.012 972.934,250.012 "
+       id="polygon104" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="840.3078"
+     y="233.94409"
+     id="text106">
+    <tspan
+       x="840.3078"
+       y="233.94409"
+       id="tspan108">pad 1 (source)</tspan>
+  </text>
+  <g
+     id="g110"
+     transform="translate(-1.6002426,-5.8559115)">
+    <circle
+       style="fill:#ffffff"
+       cx="-20.398199"
+       cy="241.51199"
+       id="ellipse112"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="-20.398199"
+       cy="241.51199"
+       id="ellipse114"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="-20.398199"
+       cy="241.51199"
+       id="ellipse116"
+       r="8.5" />
+  </g>
+  <g
+     id="g118"
+     transform="translate(-1.6002426,-5.8559115)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       x1="-192.39799"
+       y1="241.8"
+       x2="-38.6343"
+       y2="241.52901"
+       id="line120" />
+    <polygon
+       style="fill:#000000"
+       points="-41.1431,236.534 -31.1343,241.516 -41.1254,246.534 -38.6343,241.529 "
+       id="polygon122" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       points="-41.1431,236.534 -31.1343,241.516 -41.1254,246.534 -38.6343,241.529 "
+       id="polygon124" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="-149.45824"
+     y="223.94409"
+     id="text126">
+    <tspan
+       x="-149.45824"
+       y="223.94409"
+       id="tspan128">pad 0 (sink)</tspan>
+  </text>
+  <rect
+     style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+     x="388.22174"
+     y="270.81006"
+     width="100.186"
+     height="71.452301"
+     id="rect130" />
+  <g
+     id="g132"
+     transform="translate(-1.6002426,-5.8559115)">
+    <rect
+       style="fill:#ffffff"
+       x="689.98798"
+       y="345.93399"
+       width="100.186"
+       height="71.452301"
+       id="rect134" />
+    <rect
+       style="fill:none;fill-opacity:0;stroke:#8b6914;stroke-width:2"
+       x="689.98798"
+       y="345.93399"
+       width="100.186"
+       height="71.452301"
+       id="rect136" />
+  </g>
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="688.38776"
+     y1="411.53006"
+     x2="388.22174"
+     y2="342.26208"
+     id="line138" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="688.38776"
+     y1="340.07806"
+     x2="388.22174"
+     y2="270.81006"
+     id="line140" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="788.57379"
+     y1="411.53006"
+     x2="488.40775"
+     y2="342.26208"
+     id="line142" />
+  <line
+     style="fill:none;fill-opacity:0;stroke:#e60505;stroke-width:2;stroke-dasharray:4"
+     x1="788.57379"
+     y1="340.07806"
+     x2="488.40775"
+     y2="270.81006"
+     id="line144" />
+  <g
+     id="g146"
+     transform="translate(-1.6002426,-5.8559115)">
+    <circle
+       style="fill:#ffffff"
+       cx="805.59998"
+       cy="384.08401"
+       id="ellipse148"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="805.59998"
+       cy="384.08401"
+       id="ellipse150"
+       r="8.5" />
+    <circle
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       cx="805.59998"
+       cy="384.08401"
+       id="ellipse152"
+       r="8.5" />
+  </g>
+  <g
+     id="g154"
+     transform="translate(-1.6002426,-5.8559115)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       x1="814.09998"
+       y1="384.08401"
+       x2="970.43402"
+       y2="384.112"
+       id="line156" />
+    <polygon
+       style="fill:#000000"
+       points="967.935,379.112 977.934,384.114 967.933,389.112 970.434,384.112 "
+       id="polygon158" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#000000;stroke-width:2"
+       points="967.935,379.112 977.934,384.114 967.933,389.112 970.434,384.112 "
+       id="polygon160" />
+  </g>
+  <text
+     style="font-style:normal;font-weight:normal;font-size:12.80000019px;font-family:sanserif;text-anchor:start;fill:#000000"
+     x="837.8078"
+     y="368.04407"
+     id="text162">
+    <tspan
+       x="837.8078"
+       y="368.04407"
+       id="tspan164">pad 2 (source)</tspan>
+  </text>
+  <g
+     id="g166"
+     transform="translate(-1.6002426,-5.8559115)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       x1="546"
+       y1="191"
+       x2="492.15701"
+       y2="198.263"
+       id="line168" />
+    <polygon
+       style="fill:#a020f0"
+       points="495.303,202.884 484.724,199.266 493.966,192.974 492.157,198.263 "
+       id="polygon170" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       points="495.303,202.884 484.724,199.266 493.966,192.974 492.157,198.263 "
+       id="polygon172" />
+  </g>
+  <g
+     id="g174"
+     transform="translate(-1.6002426,-5.8559115)">
+    <line
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       x1="546.90802"
+       y1="190.72501"
+       x2="495.383"
+       y2="268.548"
+       id="line176" />
+    <polygon
+       style="fill:#a020f0"
+       points="500.932,269.224 491.242,274.802 492.594,263.703 495.383,268.548 "
+       id="polygon178" />
+    <polygon
+       style="fill:none;fill-opacity:0;stroke:#a020f0;stroke-width:2"
+       points="500.932,269.224 491.242,274.802 492.594,263.703 495.383,268.548 "
+       id="polygon180" />
+  </g>
+</svg>
diff --git a/Documentation/userspace-api/media/v4l/tch-formats.rst b/Documentation/userspace-api/media/v4l/tch-formats.rst
new file mode 100644
index 000000000000..f83aec85fd76
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/tch-formats.rst
@@ -0,0 +1,25 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _tch-formats:
+
+*************
+Touch Formats
+*************
+
+These formats are used for :ref:`touch` interface only.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    pixfmt-tch-td16
+    pixfmt-tch-td08
+    pixfmt-tch-tu16
+    pixfmt-tch-tu08
diff --git a/Documentation/userspace-api/media/v4l/tuner.rst b/Documentation/userspace-api/media/v4l/tuner.rst
new file mode 100644
index 000000000000..02a396eb6613
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/tuner.rst
@@ -0,0 +1,92 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _tuner:
+
+*********************
+Tuners and Modulators
+*********************
+
+
+Tuners
+======
+
+Video input devices can have one or more tuners demodulating a RF
+signal. Each tuner is associated with one or more video inputs,
+depending on the number of RF connectors on the tuner. The ``type``
+field of the respective struct :c:type:`v4l2_input`
+returned by the :ref:`VIDIOC_ENUMINPUT` ioctl is
+set to ``V4L2_INPUT_TYPE_TUNER`` and its ``tuner`` field contains the
+index number of the tuner.
+
+Radio input devices have exactly one tuner with index zero, no video
+inputs.
+
+To query and change tuner properties applications use the
+:ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>` and
+:ref:`VIDIOC_S_TUNER <VIDIOC_G_TUNER>` ioctls, respectively. The
+struct :c:type:`v4l2_tuner` returned by :ref:`VIDIOC_G_TUNER <VIDIOC_G_TUNER>`
+also contains signal status information applicable when the tuner of the
+current video or radio input is queried.
+
+.. note::
+
+   :ref:`VIDIOC_S_TUNER <VIDIOC_G_TUNER>` does not switch the
+   current tuner, when there is more than one. The tuner is solely
+   determined by the current video input. Drivers must support both ioctls
+   and set the ``V4L2_CAP_TUNER`` flag in the struct :c:type:`v4l2_capability`
+   returned by the :ref:`VIDIOC_QUERYCAP` ioctl when the
+   device has one or more tuners.
+
+
+Modulators
+==========
+
+Video output devices can have one or more modulators, that modulate a
+video signal for radiation or connection to the antenna input of a TV
+set or video recorder. Each modulator is associated with one or more
+video outputs, depending on the number of RF connectors on the
+modulator. The ``type`` field of the respective struct
+:c:type:`v4l2_output` returned by the
+:ref:`VIDIOC_ENUMOUTPUT` ioctl is set to
+``V4L2_OUTPUT_TYPE_MODULATOR`` and its ``modulator`` field contains the
+index number of the modulator.
+
+Radio output devices have exactly one modulator with index zero, no
+video outputs.
+
+A video or radio device cannot support both a tuner and a modulator. Two
+separate device nodes will have to be used for such hardware, one that
+supports the tuner functionality and one that supports the modulator
+functionality. The reason is a limitation with the
+:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl where you
+cannot specify whether the frequency is for a tuner or a modulator.
+
+To query and change modulator properties applications use the
+:ref:`VIDIOC_G_MODULATOR <VIDIOC_G_MODULATOR>` and
+:ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl. Note that
+:ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` does not switch the current modulator, when there
+is more than one at all. The modulator is solely determined by the
+current video output. Drivers must support both ioctls and set the
+``V4L2_CAP_MODULATOR`` flag in the struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl when the device has
+one or more modulators.
+
+
+Radio Frequency
+===============
+
+To get and set the tuner or modulator radio frequency applications use
+the :ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` and
+:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl which both take
+a pointer to a struct :c:type:`v4l2_frequency`. These
+ioctls are used for TV and radio devices alike. Drivers must support
+both ioctls when the tuner or modulator ioctls are supported, or when
+the device is a radio device.
diff --git a/Documentation/userspace-api/media/v4l/user-func.rst b/Documentation/userspace-api/media/v4l/user-func.rst
new file mode 100644
index 000000000000..f235f88efe89
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/user-func.rst
@@ -0,0 +1,88 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _user-func:
+
+******************
+Function Reference
+******************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    func-close
+    func-ioctl
+    vidioc-create-bufs
+    vidioc-cropcap
+    vidioc-dbg-g-chip-info
+    vidioc-dbg-g-register
+    vidioc-decoder-cmd
+    vidioc-dqevent
+    vidioc-dv-timings-cap
+    vidioc-encoder-cmd
+    vidioc-enumaudio
+    vidioc-enumaudioout
+    vidioc-enum-dv-timings
+    vidioc-enum-fmt
+    vidioc-enum-framesizes
+    vidioc-enum-frameintervals
+    vidioc-enum-freq-bands
+    vidioc-enuminput
+    vidioc-enumoutput
+    vidioc-enumstd
+    vidioc-expbuf
+    vidioc-g-audio
+    vidioc-g-audioout
+    vidioc-g-crop
+    vidioc-g-ctrl
+    vidioc-g-dv-timings
+    vidioc-g-edid
+    vidioc-g-enc-index
+    vidioc-g-ext-ctrls
+    vidioc-g-fbuf
+    vidioc-g-fmt
+    vidioc-g-frequency
+    vidioc-g-input
+    vidioc-g-jpegcomp
+    vidioc-g-modulator
+    vidioc-g-output
+    vidioc-g-parm
+    vidioc-g-priority
+    vidioc-g-selection
+    vidioc-g-sliced-vbi-cap
+    vidioc-g-std
+    vidioc-g-tuner
+    vidioc-log-status
+    vidioc-overlay
+    vidioc-prepare-buf
+    vidioc-qbuf
+    vidioc-querybuf
+    vidioc-querycap
+    vidioc-queryctrl
+    vidioc-query-dv-timings
+    vidioc-querystd
+    vidioc-reqbufs
+    vidioc-s-hw-freq-seek
+    vidioc-streamon
+    vidioc-subdev-enum-frame-interval
+    vidioc-subdev-enum-frame-size
+    vidioc-subdev-enum-mbus-code
+    vidioc-subdev-g-crop
+    vidioc-subdev-g-fmt
+    vidioc-subdev-g-frame-interval
+    vidioc-subdev-g-selection
+    vidioc-subscribe-event
+    func-mmap
+    func-munmap
+    func-open
+    func-poll
+    func-read
+    func-select
+    func-write
diff --git a/Documentation/userspace-api/media/v4l/userp.rst b/Documentation/userspace-api/media/v4l/userp.rst
new file mode 100644
index 000000000000..2d0fa7353066
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/userp.rst
@@ -0,0 +1,128 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _userp:
+
+*****************************
+Streaming I/O (User Pointers)
+*****************************
+
+Input and output devices support this I/O method when the
+``V4L2_CAP_STREAMING`` flag in the ``capabilities`` field of struct
+:c:type:`v4l2_capability` returned by the
+:ref:`VIDIOC_QUERYCAP` ioctl is set. If the
+particular user pointer method (not only memory mapping) is supported
+must be determined by calling the :ref:`VIDIOC_REQBUFS` ioctl
+with the memory type set to ``V4L2_MEMORY_USERPTR``.
+
+This I/O method combines advantages of the read/write and memory mapping
+methods. Buffers (planes) are allocated by the application itself, and
+can reside for example in virtual or shared memory. Only pointers to
+data are exchanged, these pointers and meta-information are passed in
+struct :c:type:`v4l2_buffer` (or in struct
+:c:type:`v4l2_plane` in the multi-planar API case). The
+driver must be switched into user pointer I/O mode by calling the
+:ref:`VIDIOC_REQBUFS` with the desired buffer type.
+No buffers (planes) are allocated beforehand, consequently they are not
+indexed and cannot be queried like mapped buffers with the
+:ref:`VIDIOC_QUERYBUF <VIDIOC_QUERYBUF>` ioctl.
+
+Example: Initiating streaming I/O with user pointers
+====================================================
+
+.. code-block:: c
+
+    struct v4l2_requestbuffers reqbuf;
+
+    memset (&reqbuf, 0, sizeof (reqbuf));
+    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+    reqbuf.memory = V4L2_MEMORY_USERPTR;
+
+    if (ioctl (fd, VIDIOC_REQBUFS, &reqbuf) == -1) {
+	if (errno == EINVAL)
+	    printf ("Video capturing or user pointer streaming is not supported\\n");
+	else
+	    perror ("VIDIOC_REQBUFS");
+
+	exit (EXIT_FAILURE);
+    }
+
+Buffer (plane) addresses and sizes are passed on the fly with the
+:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` ioctl. Although buffers are commonly
+cycled, applications can pass different addresses and sizes at each
+:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` call. If required by the hardware the
+driver swaps memory pages within physical memory to create a continuous
+area of memory. This happens transparently to the application in the
+virtual memory subsystem of the kernel. When buffer pages have been
+swapped out to disk they are brought back and finally locked in physical
+memory for DMA. [#f1]_
+
+Filled or displayed buffers are dequeued with the
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. The driver can unlock the
+memory pages at any time between the completion of the DMA and this
+ioctl. The memory is also unlocked when
+:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called,
+:ref:`VIDIOC_REQBUFS`, or when the device is closed.
+Applications must take care not to free buffers without dequeuing.
+Firstly, the buffers remain locked for longer, wasting physical memory.
+Secondly the driver will not be notified when the memory is returned to
+the application's free list and subsequently reused for other purposes,
+possibly completing the requested DMA and overwriting valuable data.
+
+For capturing applications it is customary to enqueue a number of empty
+buffers, to start capturing and enter the read loop. Here the
+application waits until a filled buffer can be dequeued, and re-enqueues
+the buffer when the data is no longer needed. Output applications fill
+and enqueue buffers, when enough buffers are stacked up output is
+started. In the write loop, when the application runs out of free
+buffers it must wait until an empty buffer can be dequeued and reused.
+Two methods exist to suspend execution of the application until one or
+more buffers can be dequeued. By default :ref:`VIDIOC_DQBUF
+<VIDIOC_QBUF>` blocks when no buffer is in the outgoing queue. When the
+``O_NONBLOCK`` flag was given to the :ref:`open() <func-open>` function,
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN``
+error code when no buffer is available. The :ref:`select()
+<func-select>` or :ref:`poll() <func-poll>` function are always
+available.
+
+To start and stop capturing or output applications call the
+:ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and
+:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctl.
+
+.. note::
+
+   :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from
+   both queues and unlocks all buffers as a side effect. Since there is no
+   notion of doing anything "now" on a multitasking system, if an
+   application needs to synchronize with another event it should examine
+   the struct :c:type:`v4l2_buffer` ``timestamp`` of captured or
+   outputted buffers.
+
+Drivers implementing user pointer I/O must support the
+:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>`, :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`,
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`
+and :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` ioctls, the
+:ref:`select() <func-select>` and :ref:`poll() <func-poll>` function. [#f2]_
+
+.. [#f1]
+   We expect that frequently used buffers are typically not swapped out.
+   Anyway, the process of swapping, locking or generating scatter-gather
+   lists may be time consuming. The delay can be masked by the depth of
+   the incoming buffer queue, and perhaps by maintaining caches assuming
+   a buffer will be soon enqueued again. On the other hand, to optimize
+   memory usage drivers can limit the number of buffers locked in
+   advance and recycle the most recently used buffers first. Of course,
+   the pages of empty buffers in the incoming queue need not be saved to
+   disk. Output buffers must be saved on the incoming and outgoing queue
+   because an application may share them with other processes.
+
+.. [#f2]
+   At the driver level :ref:`select() <func-select>` and :ref:`poll() <func-poll>` are
+   the same, and :ref:`select() <func-select>` is too important to be optional.
+   The rest should be evident.
diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst
new file mode 100644
index 000000000000..5c6f351b2443
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst
@@ -0,0 +1,51 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-selection-flags:
+
+***************
+Selection flags
+***************
+
+.. tabularcolumns:: |p{5.2cm}|p{2.0cm}|p{6.5cm}|p{1.2cm}|p{1.6cm}|
+
+.. _v4l2-selection-flags-table:
+
+.. flat-table:: Selection flag definitions
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Flag name
+      - id
+      - Definition
+      - Valid for V4L2
+      - Valid for V4L2 subdev
+    * - ``V4L2_SEL_FLAG_GE``
+      - (1 << 0)
+      - Suggest the driver it should choose greater or equal rectangle (in
+	size) than was requested. Albeit the driver may choose a lesser
+	size, it will only do so due to hardware limitations. Without this
+	flag (and ``V4L2_SEL_FLAG_LE``) the behaviour is to choose the
+	closest possible rectangle.
+      - Yes
+      - Yes
+    * - ``V4L2_SEL_FLAG_LE``
+      - (1 << 1)
+      - Suggest the driver it should choose lesser or equal rectangle (in
+	size) than was requested. Albeit the driver may choose a greater
+	size, it will only do so due to hardware limitations.
+      - Yes
+      - Yes
+    * - ``V4L2_SEL_FLAG_KEEP_CONFIG``
+      - (1 << 2)
+      - The configuration must not be propagated to any further processing
+	steps. If this flag is not given, the configuration is propagated
+	inside the subdevice to all further processing steps.
+      - No
+      - Yes
diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst
new file mode 100644
index 000000000000..69f500093aa2
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst
@@ -0,0 +1,78 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2-selection-targets:
+
+*****************
+Selection targets
+*****************
+
+The precise meaning of the selection targets may be dependent on which
+of the two interfaces they are used.
+
+
+.. _v4l2-selection-targets-table:
+
+.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{7.4cm}|p{1.2cm}|p{1.4cm}|
+
+.. flat-table:: Selection target definitions
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Target name
+      - id
+      - Definition
+      - Valid for V4L2
+      - Valid for V4L2 subdev
+    * - ``V4L2_SEL_TGT_CROP``
+      - 0x0000
+      - Crop rectangle. Defines the cropped area.
+      - Yes
+      - Yes
+    * - ``V4L2_SEL_TGT_CROP_DEFAULT``
+      - 0x0001
+      - Suggested cropping rectangle that covers the "whole picture".
+        This includes only active pixels and excludes other non-active
+        pixels such as black pixels.
+      - Yes
+      - Yes
+    * - ``V4L2_SEL_TGT_CROP_BOUNDS``
+      - 0x0002
+      - Bounds of the crop rectangle. All valid crop rectangles fit inside
+	the crop bounds rectangle.
+      - Yes
+      - Yes
+    * - ``V4L2_SEL_TGT_NATIVE_SIZE``
+      - 0x0003
+      - The native size of the device, e.g. a sensor's pixel array.
+	``left`` and ``top`` fields are zero for this target.
+      - Yes
+      - Yes
+    * - ``V4L2_SEL_TGT_COMPOSE``
+      - 0x0100
+      - Compose rectangle. Used to configure scaling and composition.
+      - Yes
+      - Yes
+    * - ``V4L2_SEL_TGT_COMPOSE_DEFAULT``
+      - 0x0101
+      - Suggested composition rectangle that covers the "whole picture".
+      - Yes
+      - No
+    * - ``V4L2_SEL_TGT_COMPOSE_BOUNDS``
+      - 0x0102
+      - Bounds of the compose rectangle. All valid compose rectangles fit
+	inside the compose bounds rectangle.
+      - Yes
+      - Yes
+    * - ``V4L2_SEL_TGT_COMPOSE_PADDED``
+      - 0x0103
+      - The active area and all padding pixels that are inserted or
+	modified by hardware.
+      - Yes
+      - No
diff --git a/Documentation/userspace-api/media/v4l/v4l2.rst b/Documentation/userspace-api/media/v4l/v4l2.rst
new file mode 100644
index 000000000000..ab7c97c39b97
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/v4l2.rst
@@ -0,0 +1,423 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. include:: <isonum.txt>
+.. _v4l2spec:
+
+############################
+Part I - Video for Linux API
+############################
+
+This part describes the Video for Linux API version 2 (V4L2 API) specification.
+
+**Revision 4.5**
+
+.. only:: html
+
+   .. class:: toc-title
+
+        Table of Contents
+
+.. toctree::
+    :numbered:
+    :maxdepth: 5
+
+    common
+    pixfmt
+    io
+    devices
+    libv4l
+    compat
+    user-func
+    common-defs
+    videodev
+    capture-example
+    v4l2grab-example
+    biblio
+
+
+**********************
+Revision and Copyright
+**********************
+
+Authors, in alphabetical order:
+
+- Ailus, Sakari <sakari.ailus@iki.fi>
+
+  - Subdev selections API.
+
+- Carvalho Chehab, Mauro <mchehab+samsung@kernel.org>
+
+  - Documented libv4l, designed and added v4l2grab example, Remote Controller chapter.
+
+- Dirks, Bill
+
+  - Original author of the V4L2 API and documentation.
+
+- Figa, Tomasz <tfiga@chromium.org>
+
+  - Documented the memory-to-memory decoder interface.
+
+- H Schimek, Michael <mschimek@gmx.at>
+
+  - Original author of the V4L2 API and documentation.
+
+- Karicheri, Muralidharan <m-karicheri2@ti.com>
+
+  - Documented the Digital Video timings API.
+
+- Osciak, Pawel <posciak@chromium.org>
+
+  - Documented the memory-to-memory decoder interface.
+
+- Osciak, Pawel <pawel@osciak.com>
+
+  - Designed and documented the multi-planar API.
+
+- Palosaari, Antti <crope@iki.fi>
+
+  - SDR API.
+
+- Ribalda, Ricardo
+
+  - Introduce HSV formats and other minor changes.
+
+- Rubli, Martin
+
+  - Designed and documented the VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctls.
+
+- Walls, Andy <awalls@md.metrocast.net>
+
+  - Documented the fielded V4L2_MPEG_STREAM_VBI_FMT_IVTV MPEG stream embedded, sliced VBI data format in this specification.
+
+- Verkuil, Hans <hverkuil@xs4all.nl>
+
+  - Designed and documented the VIDIOC_LOG_STATUS ioctl, the extended control ioctls, major parts of the sliced VBI API, the MPEG encoder and decoder APIs and the DV Timings API.
+
+**Copyright** |copy| 1999-2018: Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab, Pawel Osciak, Sakari Ailus & Antti Palosaari, Tomasz Figa
+
+Except when explicitly stated as GPL, programming examples within this
+part can be used and distributed without restrictions.
+
+****************
+Revision History
+****************
+
+:revision: 4.10 / 2016-07-15 (*rr*)
+
+Introduce HSV formats.
+
+
+:revision: 4.5 / 2015-10-29 (*rr*)
+
+Extend VIDIOC_G_EXT_CTRLS;. Replace ctrl_class with a new union with
+ctrl_class and which. Which is used to select the current value of the
+control or the default value.
+
+
+:revision: 4.4 / 2015-05-26 (*ap*)
+
+Renamed V4L2_TUNER_ADC to V4L2_TUNER_SDR. Added
+V4L2_CID_RF_TUNER_RF_GAIN control. Added transmitter support for
+Software Defined Radio (SDR) Interface.
+
+
+:revision: 4.1 / 2015-02-13 (*mcc*)
+
+Fix documentation for media controller device nodes and add support for
+DVB device nodes. Add support for Tuner sub-device.
+
+
+:revision: 3.19 / 2014-12-05 (*hv*)
+
+Rewrote Colorspace chapter, added new enum
+:c:type:`v4l2_ycbcr_encoding` and enum
+:c:type:`v4l2_quantization` fields to struct
+:c:type:`v4l2_pix_format`, struct
+:c:type:`v4l2_pix_format_mplane` and struct
+:c:type:`v4l2_mbus_framefmt`.
+
+
+:revision: 3.17 / 2014-08-04 (*lp, hv*)
+
+Extended struct :c:type:`v4l2_pix_format`. Added
+format flags. Added compound control types and VIDIOC_QUERY_EXT_CTRL.
+
+
+:revision: 3.15 / 2014-02-03 (*hv, ap*)
+
+Update several sections of "Common API Elements": "Opening and Closing
+Devices" "Querying Capabilities", "Application Priority", "Video Inputs
+and Outputs", "Audio Inputs and Outputs" "Tuners and Modulators", "Video
+Standards" and "Digital Video (DV) Timings". Added SDR API.
+
+
+:revision: 3.14 / 2013-11-25 (*rr*)
+
+Set width and height as unsigned on v4l2_rect.
+
+
+:revision: 3.11 / 2013-05-26 (*hv*)
+
+Remove obsolete VIDIOC_DBG_G_CHIP_IDENT ioctl.
+
+
+:revision: 3.10 / 2013-03-25 (*hv*)
+
+Remove obsolete and unused DV_PRESET ioctls: VIDIOC_G_DV_PRESET,
+VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and
+VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output
+capability flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS.
+Added VIDIOC_DBG_G_CHIP_INFO.
+
+
+:revision: 3.9 / 2012-12-03 (*sa, sn*)
+
+Added timestamp types to v4l2_buffer. Added
+V4L2_EVENT_CTRL_CH_RANGE control event changes flag.
+
+
+:revision: 3.6 / 2012-07-02 (*hv*)
+
+Added VIDIOC_ENUM_FREQ_BANDS.
+
+
+:revision: 3.5 / 2012-05-07 (*sa, sn, hv*)
+
+Added V4L2_CTRL_TYPE_INTEGER_MENU and V4L2 subdev selections API.
+Improved the description of V4L2_CID_COLORFX control, added
+V4L2_CID_COLORFX_CBCR control. Added camera controls
+V4L2_CID_AUTO_EXPOSURE_BIAS,
+V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE,
+V4L2_CID_IMAGE_STABILIZATION, V4L2_CID_ISO_SENSITIVITY,
+V4L2_CID_ISO_SENSITIVITY_AUTO, V4L2_CID_EXPOSURE_METERING,
+V4L2_CID_SCENE_MODE, V4L2_CID_3A_LOCK,
+V4L2_CID_AUTO_FOCUS_START, V4L2_CID_AUTO_FOCUS_STOP,
+V4L2_CID_AUTO_FOCUS_STATUS and V4L2_CID_AUTO_FOCUS_RANGE. Added
+VIDIOC_ENUM_DV_TIMINGS, VIDIOC_QUERY_DV_TIMINGS and
+VIDIOC_DV_TIMINGS_CAP.
+
+
+:revision: 3.4 / 2012-01-25 (*sn*)
+
+Added :ref:`JPEG compression control class. <jpeg-controls>`
+
+
+:revision: 3.3 / 2012-01-11 (*hv*)
+
+Added device_caps field to struct v4l2_capabilities.
+
+
+:revision: 3.2 / 2011-08-26 (*hv*)
+
+Added V4L2_CTRL_FLAG_VOLATILE.
+
+
+:revision: 3.1 / 2011-06-27 (*mcc, po, hv*)
+
+Documented that VIDIOC_QUERYCAP now returns a per-subsystem version
+instead of a per-driver one. Standardize an error code for invalid
+ioctl. Added V4L2_CTRL_TYPE_BITMASK.
+
+
+:revision: 2.6.39 / 2011-03-01 (*mcc, po*)
+
+Removed VIDIOC_*_OLD from videodev2.h header and update it to reflect
+latest changes. Added the :ref:`multi-planar API <planar-apis>`.
+
+
+:revision: 2.6.37 / 2010-08-06 (*hv*)
+
+Removed obsolete vtx (videotext) API.
+
+
+:revision: 2.6.33 / 2009-12-03 (*mk*)
+
+Added documentation for the Digital Video timings API.
+
+
+:revision: 2.6.32 / 2009-08-31 (*mcc*)
+
+Now, revisions will match the kernel version where the V4L2 API changes
+will be used by the Linux Kernel. Also added Remote Controller chapter.
+
+
+:revision: 0.29 / 2009-08-26 (*ev*)
+
+Added documentation for string controls and for FM Transmitter controls.
+
+
+:revision: 0.28 / 2009-08-26 (*gl*)
+
+Added V4L2_CID_BAND_STOP_FILTER documentation.
+
+
+:revision: 0.27 / 2009-08-15 (*mcc*)
+
+Added libv4l and Remote Controller documentation; added v4l2grab and
+keytable application examples.
+
+
+:revision: 0.26 / 2009-07-23 (*hv*)
+
+Finalized the RDS capture API. Added modulator and RDS encoder
+capabilities. Added support for string controls.
+
+
+:revision: 0.25 / 2009-01-18 (*hv*)
+
+Added pixel formats VYUY, NV16 and NV61, and changed the debug ioctls
+VIDIOC_DBG_G/S_REGISTER and VIDIOC_DBG_G_CHIP_IDENT. Added camera
+controls V4L2_CID_ZOOM_ABSOLUTE, V4L2_CID_ZOOM_RELATIVE,
+V4L2_CID_ZOOM_CONTINUOUS and V4L2_CID_PRIVACY.
+
+
+:revision: 0.24 / 2008-03-04 (*mhs*)
+
+Added pixel formats Y16 and SBGGR16, new controls and a camera controls
+class. Removed VIDIOC_G/S_MPEGCOMP.
+
+
+:revision: 0.23 / 2007-08-30 (*mhs*)
+
+Fixed a typo in VIDIOC_DBG_G/S_REGISTER. Clarified the byte order of
+packed pixel formats.
+
+
+:revision: 0.22 / 2007-08-29 (*mhs*)
+
+Added the Video Output Overlay interface, new MPEG controls,
+V4L2_FIELD_INTERLACED_TB and V4L2_FIELD_INTERLACED_BT,
+VIDIOC_DBG_G/S_REGISTER, VIDIOC\_(TRY\_)ENCODER_CMD,
+VIDIOC_G_CHIP_IDENT, VIDIOC_G_ENC_INDEX, new pixel formats.
+Clarifications in the cropping chapter, about RGB pixel formats, the
+mmap(), poll(), select(), read() and write() functions. Typographical
+fixes.
+
+
+:revision: 0.21 / 2006-12-19 (*mhs*)
+
+Fixed a link in the VIDIOC_G_EXT_CTRLS section.
+
+
+:revision: 0.20 / 2006-11-24 (*mhs*)
+
+Clarified the purpose of the audioset field in struct v4l2_input and
+v4l2_output.
+
+
+:revision: 0.19 / 2006-10-19 (*mhs*)
+
+Documented V4L2_PIX_FMT_RGB444.
+
+
+:revision: 0.18 / 2006-10-18 (*mhs*)
+
+Added the description of extended controls by Hans Verkuil. Linked
+V4L2_PIX_FMT_MPEG to V4L2_CID_MPEG_STREAM_TYPE.
+
+
+:revision: 0.17 / 2006-10-12 (*mhs*)
+
+Corrected V4L2_PIX_FMT_HM12 description.
+
+
+:revision: 0.16 / 2006-10-08 (*mhs*)
+
+VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS are now part
+of the API.
+
+
+:revision: 0.15 / 2006-09-23 (*mhs*)
+
+Cleaned up the bibliography, added BT.653 and BT.1119.
+capture.c/start_capturing() for user pointer I/O did not initialize the
+buffer index. Documented the V4L MPEG and MJPEG VID_TYPEs and
+V4L2_PIX_FMT_SBGGR8. Updated the list of reserved pixel formats. See
+the history chapter for API changes.
+
+
+:revision: 0.14 / 2006-09-14 (*mr*)
+
+Added VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS proposal
+for frame format enumeration of digital devices.
+
+
+:revision: 0.13 / 2006-04-07 (*mhs*)
+
+Corrected the description of struct v4l2_window clips. New V4L2_STD\_
+and V4L2_TUNER_MODE_LANG1_LANG2 defines.
+
+
+:revision: 0.12 / 2006-02-03 (*mhs*)
+
+Corrected the description of struct v4l2_captureparm and
+v4l2_outputparm.
+
+
+:revision: 0.11 / 2006-01-27 (*mhs*)
+
+Improved the description of struct v4l2_tuner.
+
+
+:revision: 0.10 / 2006-01-10 (*mhs*)
+
+VIDIOC_G_INPUT and VIDIOC_S_PARM clarifications.
+
+
+:revision: 0.9 / 2005-11-27 (*mhs*)
+
+Improved the 525 line numbering diagram. Hans Verkuil and I rewrote the
+sliced VBI section. He also contributed a VIDIOC_LOG_STATUS page.
+Fixed VIDIOC_S_STD call in the video standard selection example.
+Various updates.
+
+
+:revision: 0.8 / 2004-10-04 (*mhs*)
+
+Somehow a piece of junk slipped into the capture example, removed.
+
+
+:revision: 0.7 / 2004-09-19 (*mhs*)
+
+Fixed video standard selection, control enumeration, downscaling and
+aspect example. Added read and user pointer i/o to video capture
+example.
+
+
+:revision: 0.6 / 2004-08-01 (*mhs*)
+
+v4l2_buffer changes, added video capture example, various corrections.
+
+
+:revision: 0.5 / 2003-11-05 (*mhs*)
+
+Pixel format erratum.
+
+
+:revision: 0.4 / 2003-09-17 (*mhs*)
+
+Corrected source and Makefile to generate a PDF. SGML fixes. Added
+latest API changes. Closed gaps in the history chapter.
+
+
+:revision: 0.3 / 2003-02-05 (*mhs*)
+
+Another draft, more corrections.
+
+
+:revision: 0.2 / 2003-01-15 (*mhs*)
+
+Second draft, with corrections pointed out by Gerd Knorr.
+
+
+:revision: 0.1 / 2002-12-01 (*mhs*)
+
+First draft, based on documentation by Bill Dirks and discussions on the
+V4L mailing list.
diff --git a/Documentation/userspace-api/media/v4l/v4l2grab-example.rst b/Documentation/userspace-api/media/v4l/v4l2grab-example.rst
new file mode 100644
index 000000000000..270738876f72
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/v4l2grab-example.rst
@@ -0,0 +1,24 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _v4l2grab-example:
+
+**********************************
+Video Grabber example using libv4l
+**********************************
+
+This program demonstrates how to grab V4L2 images in ppm format by using
+libv4l handlers. The advantage is that this grabber can potentially work
+with any V4L2 driver.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    v4l2grab.c
diff --git a/Documentation/userspace-api/media/v4l/v4l2grab.c.rst b/Documentation/userspace-api/media/v4l/v4l2grab.c.rst
new file mode 100644
index 000000000000..a21ff357a830
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/v4l2grab.c.rst
@@ -0,0 +1,176 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+file: media/v4l/v4l2grab.c
+==========================
+
+.. code-block:: c
+
+    /* V4L2 video picture grabber
+       Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@kernel.org>
+
+       This program is free software; you can redistribute it and/or modify
+       it under the terms of the GNU General Public License as published by
+       the Free Software Foundation version 2 of the License.
+
+       This program is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+       GNU General Public License for more details.
+     */
+
+    #include <stdio.h>
+    #include <stdlib.h>
+    #include <string.h>
+    #include <fcntl.h>
+    #include <errno.h>
+    #include <sys/ioctl.h>
+    #include <sys/types.h>
+    #include <sys/time.h>
+    #include <sys/mman.h>
+    #include <linux/videodev2.h>
+    #include "../libv4l/include/libv4l2.h"
+
+    #define CLEAR(x) memset(&(x), 0, sizeof(x))
+
+    struct buffer {
+	    void   *start;
+	    size_t length;
+    };
+
+    static void xioctl(int fh, int request, void *arg)
+    {
+	    int r;
+
+	    do {
+		    r = v4l2_ioctl(fh, request, arg);
+	    } while (r == -1 && ((errno == EINTR) || (errno == EAGAIN)));
+
+	    if (r == -1) {
+		    fprintf(stderr, "error %d, %s\\n", errno, strerror(errno));
+		    exit(EXIT_FAILURE);
+	    }
+    }
+
+    int main(int argc, char **argv)
+    {
+	    struct v4l2_format              fmt;
+	    struct v4l2_buffer              buf;
+	    struct v4l2_requestbuffers      req;
+	    enum v4l2_buf_type              type;
+	    fd_set                          fds;
+	    struct timeval                  tv;
+	    int                             r, fd = -1;
+	    unsigned int                    i, n_buffers;
+	    char                            *dev_name = "/dev/video0";
+	    char                            out_name[256];
+	    FILE                            *fout;
+	    struct buffer                   *buffers;
+
+	    fd = v4l2_open(dev_name, O_RDWR | O_NONBLOCK, 0);
+	    if (fd < 0) {
+		    perror("Cannot open device");
+		    exit(EXIT_FAILURE);
+	    }
+
+	    CLEAR(fmt);
+	    fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	    fmt.fmt.pix.width       = 640;
+	    fmt.fmt.pix.height      = 480;
+	    fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_RGB24;
+	    fmt.fmt.pix.field       = V4L2_FIELD_INTERLACED;
+	    xioctl(fd, VIDIOC_S_FMT, &fmt);
+	    if (fmt.fmt.pix.pixelformat != V4L2_PIX_FMT_RGB24) {
+		    printf("Libv4l didn't accept RGB24 format. Can't proceed.\\n");
+		    exit(EXIT_FAILURE);
+	    }
+	    if ((fmt.fmt.pix.width != 640) || (fmt.fmt.pix.height != 480))
+		    printf("Warning: driver is sending image at %dx%d\\n",
+			    fmt.fmt.pix.width, fmt.fmt.pix.height);
+
+	    CLEAR(req);
+	    req.count = 2;
+	    req.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	    req.memory = V4L2_MEMORY_MMAP;
+	    xioctl(fd, VIDIOC_REQBUFS, &req);
+
+	    buffers = calloc(req.count, sizeof(*buffers));
+	    for (n_buffers = 0; n_buffers < req.count; ++n_buffers) {
+		    CLEAR(buf);
+
+		    buf.type        = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    buf.memory      = V4L2_MEMORY_MMAP;
+		    buf.index       = n_buffers;
+
+		    xioctl(fd, VIDIOC_QUERYBUF, &buf);
+
+		    buffers[n_buffers].length = buf.length;
+		    buffers[n_buffers].start = v4l2_mmap(NULL, buf.length,
+				  PROT_READ | PROT_WRITE, MAP_SHARED,
+				  fd, buf.m.offset);
+
+		    if (MAP_FAILED == buffers[n_buffers].start) {
+			    perror("mmap");
+			    exit(EXIT_FAILURE);
+		    }
+	    }
+
+	    for (i = 0; i < n_buffers; ++i) {
+		    CLEAR(buf);
+		    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    buf.memory = V4L2_MEMORY_MMAP;
+		    buf.index = i;
+		    xioctl(fd, VIDIOC_QBUF, &buf);
+	    }
+	    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	    xioctl(fd, VIDIOC_STREAMON, &type);
+	    for (i = 0; i < 20; i++) {
+		    do {
+			    FD_ZERO(&fds);
+			    FD_SET(fd, &fds);
+
+			    /* Timeout. */
+			    tv.tv_sec = 2;
+			    tv.tv_usec = 0;
+
+			    r = select(fd + 1, &fds, NULL, NULL, &tv);
+		    } while ((r == -1 && (errno = EINTR)));
+		    if (r == -1) {
+			    perror("select");
+			    return errno;
+		    }
+
+		    CLEAR(buf);
+		    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		    buf.memory = V4L2_MEMORY_MMAP;
+		    xioctl(fd, VIDIOC_DQBUF, &buf);
+
+		    sprintf(out_name, "out%03d.ppm", i);
+		    fout = fopen(out_name, "w");
+		    if (!fout) {
+			    perror("Cannot open image");
+			    exit(EXIT_FAILURE);
+		    }
+		    fprintf(fout, "P6\\n%d %d 255\\n",
+			    fmt.fmt.pix.width, fmt.fmt.pix.height);
+		    fwrite(buffers[buf.index].start, buf.bytesused, 1, fout);
+		    fclose(fout);
+
+		    xioctl(fd, VIDIOC_QBUF, &buf);
+	    }
+
+	    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	    xioctl(fd, VIDIOC_STREAMOFF, &type);
+	    for (i = 0; i < n_buffers; ++i)
+		    v4l2_munmap(buffers[i].start, buffers[i].length);
+	    v4l2_close(fd);
+
+	    return 0;
+    }
diff --git a/Documentation/userspace-api/media/v4l/vbi_525.svg b/Documentation/userspace-api/media/v4l/vbi_525.svg
new file mode 100644
index 000000000000..b7d09057617e
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vbi_525.svg
@@ -0,0 +1,821 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   xml:space="preserve"
+   width="208.73068mm"
+   height="51.395489mm"
+   viewBox="0 0 739.59691 182.11"
+   sodipodi:docname="vbi_525.svg"><sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview4"
+     showgrid="false"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     inkscape:zoom="1.5350601"
+     inkscape:cx="264.23387"
+     inkscape:cy="44.916942"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="g10"
+     units="mm" /><metadata
+     id="metadata8"><rdf:RDF><cc:Work
+	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+     id="defs6"><clipPath
+       id="clipPath20"
+       clipPathUnits="userSpaceOnUse"><path
+	 inkscape:connector-curvature="0"
+	 id="path22"
+	 d="m 0,0 5950,0 0,3922 L 0,3922 0,0 Z m 0,3922 5950,0 0,1 -5950,0 0,-1 z m 0,1 1359,0 0,1 -1359,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1363,0 0,1 -1363,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1367,0 0,1 -1367,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1371,0 0,1 -1371,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1375,0 0,1 -1375,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1379,0 0,1 -1379,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1383,0 0,1 -1383,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1387,0 0,1 -1387,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1391,0 0,1 -1391,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1390,0 0,1 -1390,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1386,0 0,1 -1386,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1382,0 0,1 -1382,0 0,-1 z m
+1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1378,0 0,1 -1378,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1374,0 0,1 -1374,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1370,0 0,1 -1370,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1366,0 0,1 -1366,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1362,0 0,1 -1362,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1358,0 0,1 -1358,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,4478 -5950,0 0,-4478 z" /></clipPath><clipPath
+       id="clipPath98"
+       clipPathUnits="userSpaceOnUse"><path
+	 inkscape:connector-curvature="0"
+	 id="path100"
+	 d="m 0,0 5950,0 0,4546 L 0,4546 0,0 Z m 0,4546 5950,0 0,1 -5950,0 0,-1 z m 0,1 1360,0 0,1 -1360,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1364,0 0,1 -1364,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1368,0 0,1 -1368,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1372,0 0,1 -1372,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1376,0 0,1 -1376,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1380,0 0,1 -1380,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1384,0 0,1 -1384,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1388,0 0,1 -1388,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1391,0 0,1 -1391,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1389,0 0,1 -1389,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1385,0 0,1 -1385,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1381,0 0,1 -1381,0 0,-1 z m
+1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1377,0 0,1 -1377,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1373,0 0,1 -1373,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1369,0 0,1 -1369,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1365,0 0,1 -1365,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1361,0 0,1 -1361,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1357,0 0,1 -1357,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,3854 -5950,0 0,-3854 z" /></clipPath></defs><g
+     transform="matrix(0.125,0,0,-0.125,-87.571875,638.05691)"
+     inkscape:label="vbi_525"
+     inkscape:groupmode="layer"
+     id="g10"><g
+       transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
+       id="g12"
+       style=""><path
+	 inkscape:connector-curvature="0"
+	 id="path14"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1281.75,3974.45 0,-85.05" /></g><g
+       transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
+       id="g16"
+       style=""><g
+	 clip-path="url(#clipPath20)"
+	 id="g18"
+	 style=""><path
+	   inkscape:connector-curvature="0"
+	   id="path24"
+	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   d="m 1281.75,3931.93 113.4,0" /></g></g><g
+       transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
+       id="g26"
+       style=""><path
+	 inkscape:connector-curvature="0"
+	 id="path28"
+	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+	 d="m 1352.31,3922.48 37.8,9.45 -37.8,9.45 0,-18.9" /><path
+	 inkscape:connector-curvature="0"
+	 id="path30"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1352.31,3922.48 37.8,9.45 -37.8,9.45 0,-18.9 z" /><path
+	 inkscape:connector-curvature="0"
+	 id="path32"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 4683.75,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path34"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 4400.25,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path36"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 4116.75,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path38"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 3833.25,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path40"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 3549.75,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path42"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 3266.25,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path44"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2982.75,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path46"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2699.25,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path48"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2415.75,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path50"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2132.25,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path52"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1848.75,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path54"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1565.25,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path56"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1281.75,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path58"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 998.25,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path60"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 714.75,4059.5 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path62"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 4683.75,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path64"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 4400.25,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path66"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 4116.75,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path68"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 3833.25,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path70"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 3549.75,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path72"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 3266.25,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path74"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2982.75,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path76"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2699.25,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path78"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2415.75,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path80"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 2132.25,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path82"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1848.75,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path84"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1565.25,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path86"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1281.75,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path88"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 998.25,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path90"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 714.75,4144.55 0,-56.7" /><path
+	 inkscape:connector-curvature="0"
+	 id="path92"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1281.75,4598.15 0,-85.05" /></g><g
+       transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
+       id="g94"
+       style=""><g
+	 clip-path="url(#clipPath98)"
+	 id="g96"
+	 style=""><path
+	   inkscape:connector-curvature="0"
+	   id="path102"
+	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   d="m 1281.75,4555.63 113.4,0" /></g></g><path
+       d="m 1547.8322,4815.7637 49.1401,12.2851 -49.1401,12.285 0,-24.5701"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path106"
+       inkscape:connector-curvature="0" /><path
+       d="m 1547.8322,4815.7637 49.1401,12.2851 -49.1401,12.285 0,-24.5701 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path108"
+       inkscape:connector-curvature="0" /><path
+       d="m 1456.104,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path110"
+       inkscape:connector-curvature="0" /><path
+       d="m 1824.6548,5030.7452 0,73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path112"
+       inkscape:connector-curvature="0" /><path
+       d="m 2193.2055,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path114"
+       inkscape:connector-curvature="0" /><path
+       d="m 2561.7563,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path116"
+       inkscape:connector-curvature="0" /><path
+       d="m 2930.307,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path118"
+       inkscape:connector-curvature="0" /><path
+       d="m 3298.8578,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path120"
+       inkscape:connector-curvature="0" /><path
+       d="m 3667.4085,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path122"
+       inkscape:connector-curvature="0" /><path
+       d="m 4035.9593,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path124"
+       inkscape:connector-curvature="0" /><path
+       d="m 4404.51,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path126"
+       inkscape:connector-curvature="0" /><path
+       d="m 4773.0608,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path128"
+       inkscape:connector-curvature="0" /><path
+       d="m 5141.6115,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path130"
+       inkscape:connector-curvature="0" /><path
+       d="m 5510.1623,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path132"
+       inkscape:connector-curvature="0" /><path
+       d="m 5878.713,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path134"
+       inkscape:connector-curvature="0" /><path
+       d="m 1456.104,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path136"
+       inkscape:connector-curvature="0" /><path
+       d="m 1824.6548,4920.1799 0,73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path138"
+       inkscape:connector-curvature="0" /><path
+       d="m 2193.2055,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path140"
+       inkscape:connector-curvature="0" /><path
+       d="m 2561.7563,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path142"
+       inkscape:connector-curvature="0" /><path
+       d="m 2930.307,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path144"
+       inkscape:connector-curvature="0" /><path
+       d="m 3298.8578,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path146"
+       inkscape:connector-curvature="0" /><path
+       d="m 3667.4085,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path148"
+       inkscape:connector-curvature="0" /><path
+       d="m 4035.9593,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path150"
+       inkscape:connector-curvature="0" /><path
+       d="m 4404.51,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path152"
+       inkscape:connector-curvature="0" /><path
+       d="m 4773.0608,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path154"
+       inkscape:connector-curvature="0" /><path
+       d="m 5141.6115,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path156"
+       inkscape:connector-curvature="0" /><path
+       d="m 5510.1623,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path158"
+       inkscape:connector-curvature="0" /><path
+       d="m 5878.713,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path160"
+       inkscape:connector-curvature="0" /><path
+       d="m 719.00254,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path162"
+       inkscape:connector-curvature="0" /><path
+       d="m 719.00254,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path164"
+       inkscape:connector-curvature="0" /><path
+       d="m 1087.5533,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path166"
+       inkscape:connector-curvature="0" /><path
+       d="m 1087.5533,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path168"
+       inkscape:connector-curvature="0" /><path
+       d="m 700.575,4735.9046 18.42754,0 0,-110.5653 36.85507,0 0,110.5653 18.42754,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path170"
+       inkscape:connector-curvature="0" /><path
+       d="m 774.28515,4680.6285 18.42754,0 0,110.5652 -18.42754,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path172"
+       inkscape:connector-curvature="0" /><path
+       d="m 792.71269,4735.9046 18.42753,0 0,92.1442 18.42754,-18.4341 18.42754,36.8551 18.42754,-36.8551 18.42753,36.8551 18.42754,-55.2761 18.42754,55.2761 18.42754,-18.421 18.42753,55.2761 18.42754,-55.2761 18.42754,18.421 18.4275,36.8551 18.4276,-92.1312 18.4275,55.2761 18.4275,-55.2761 0,-55.2891"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path174"
+       inkscape:connector-curvature="0" /><path
+       d="m 1069.1257,4735.9046 18.4276,0 0,-110.5653 36.8551,0 0,110.5653 18.421,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path176"
+       inkscape:connector-curvature="0" /><path
+       d="m 1142.8294,4680.6285 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path178"
+       inkscape:connector-curvature="0" /><path
+       d="m 1456.104,4735.9046 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 18.421,0 0,110.5653 165.8543,0 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 147.4203,0 0,110.5653 36.8551,0 0,-110.5653 147.4203,0 0,110.5653 36.855,0 0,-110.5653 147.4203,0 0,110.5653 36.8551,0 0,-110.5653 147.4203,0 0,110.5653 36.8551,0 0,-110.5653 147.4203,0 0,110.5653 36.855,0 0,-110.5653 147.4203,0 0,110.5653 36.8551,0 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 18.421,0 0,110.5653 165.8543,0 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.4211,0 0,110.5653 165.8543,0 0,-110.5653 18.421,0 0,110.5653 165.8544,0 0,-110.5653 36.855,0 0,110.5653 18.4211,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path180"
+       inkscape:connector-curvature="0" /><path
+       d="m 1161.2634,4735.9046 294.8406,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path182"
+       inkscape:connector-curvature="0" /><path
+       d="m 6320.9739,4735.9046 18.421,0 0,92.1442 18.4341,-18.4341 18.421,73.7102 18.4341,-55.2761 18.421,36.855 18.434,-18.434 18.4211,36.8551 18.434,-36.8551 18.421,36.8551 18.4341,-36.8551 18.421,18.434 18.4341,-36.855 18.421,36.855 18.434,-36.855 18.4211,-18.4341 0,-73.7101 18.434,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path184"
+       inkscape:connector-curvature="0" /><path
+       d="m 4828.3369,4680.6285 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path186"
+       inkscape:connector-curvature="0" /><path
+       d="m 4846.7709,4735.9046 294.8406,0 0,-110.5653 36.8551,0 0,110.5653 18.421,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path188"
+       inkscape:connector-curvature="0" /><path
+       d="m 5196.8876,4680.6285 18.4276,0 0,110.5652 -18.4276,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path190"
+       inkscape:connector-curvature="0" /><path
+       d="m 5565.4384,4680.6285 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path192"
+       inkscape:connector-curvature="0" /><path
+       d="m 5933.9891,4680.6285 18.4276,0 0,110.5652 -18.4276,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path194"
+       inkscape:connector-curvature="0" /><path
+       d="m 5952.4232,4735.9046 294.8406,0 0,-110.5653 36.855,0 0,110.5653 18.4211,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path196"
+       inkscape:connector-curvature="0" /><path
+       d="m 6302.5399,4680.6285 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path198"
+       inkscape:connector-curvature="0" /><path
+       d="m 5786.5688,4735.9046 92.1442,0 0,-110.5653 36.8551,0 0,110.5653 18.421,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path200"
+       inkscape:connector-curvature="0" /><path
+       d="m 5805.0029,4791.1937 -36.8551,-110.5652"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path202"
+       inkscape:connector-curvature="0" /><path
+       d="m 5583.8724,4735.9046 165.8414,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path204"
+       inkscape:connector-curvature="0" /><path
+       d="m 5768.1478,4791.1937 -36.8551,-110.5652"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path206"
+       inkscape:connector-curvature="0" /><path
+       d="m 5215.3217,4735.9046 294.8406,0 0,-110.5653 36.855,0 0,110.5653 18.4211,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path208"
+       inkscape:connector-curvature="0" /><path
+       d="m 6247.2638,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path210"
+       inkscape:connector-curvature="0" /><path
+       d="m 6247.2638,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path212"
+       inkscape:connector-curvature="0" /><path
+       d="m 6615.8145,5104.4553 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path214"
+       inkscape:connector-curvature="0" /><path
+       d="m 6615.8145,4993.8901 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path216"
+       inkscape:connector-curvature="0" /><path
+       d="m 700.575,3925.0929 18.42754,0 0,-110.5652 36.85507,0 0,110.5652 18.42754,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path218"
+       inkscape:connector-curvature="0" /><path
+       d="m 774.28515,3869.8168 18.42754,0 0,110.5652 -18.42754,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path220"
+       inkscape:connector-curvature="0" /><path
+       d="m 1142.8294,3869.8168 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path222"
+       inkscape:connector-curvature="0" /><path
+       d="m 792.71269,3925.0929 18.42753,0 0,110.5652 18.42754,-36.855 18.42754,18.434 18.42754,-36.8551 18.42753,36.8551 0,-92.1442 202.70293,0 0,-110.5652 36.8551,0 0,110.5652 18.421,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path224"
+       inkscape:connector-curvature="0" /><path
+       d="m 1161.2634,3925.0929 110.5653,0 0,-110.5652 18.421,0 0,110.5652 165.8543,0 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 18.421,0 0,110.5652 165.8544,0 0,-110.5652 18.421,0 0,110.5652 165.8544,0 0,-110.5652 18.421,0 0,110.5652 165.8543,0 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 147.4203,0 0,110.5652 36.8551,0 0,-110.5652 147.4203,0 0,110.5652 36.8551,0 0,-110.5652 147.4203,0 0,110.5652 36.855,0 0,-110.5652 147.4203,0 0,110.5652 36.8551,0 0,-110.5652 147.4203,0 0,110.5652 36.8551,0 0,-110.5652 147.4203,0 0,110.5652 36.855,0 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 18.421,0 0,110.5652 165.8544,0 0,-110.5652 18.421,0 0,110.5652 165.8543,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path226"
+       inkscape:connector-curvature="0" /><path
+       d="m 4220.2346,3925.0929 0,-110.5652 18.4211,0 0,110.5652 165.8543,0 0,-110.5652 18.4211,0 0,110.5652 55.2891,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path228"
+       inkscape:connector-curvature="0" /><path
+       d="m 4478.2202,3925.0929 294.8406,0 0,-110.5652 36.855,0 0,110.5652 18.4211,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path230"
+       inkscape:connector-curvature="0" /><path
+       d="m 5952.4232,3925.0929 128.9862,0 0,73.7102 18.4341,36.855 18.421,-18.421 18.434,36.8551 18.4211,-36.8551 18.434,18.421 18.421,-36.855 18.4341,18.434 18.421,-36.8551 0,-55.2891 18.4341,0 0,-110.5652 36.855,0 0,110.5652 18.4211,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path232"
+       inkscape:connector-curvature="0" /><path
+       d="m 6302.5399,3869.8168 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path234"
+       inkscape:connector-curvature="0" /><path
+       d="m 6320.9739,3925.0929 18.421,0 0,73.7102 18.4341,36.855 18.421,-36.855 18.4341,36.855 18.421,-18.421 18.434,0 18.4211,-36.8551 18.434,55.2761 18.421,-18.421 0,36.8551 18.4341,-18.4341 18.421,18.4341 18.4341,-36.8551 18.421,18.421 18.434,-55.2761 18.4211,18.4211 0,-73.7102 18.434,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path236"
+       inkscape:connector-curvature="0" /><path
+       d="m 5933.9891,3869.8168 18.4276,0 0,110.5652 -18.4276,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path238"
+       inkscape:connector-curvature="0" /><path
+       d="m 5786.5688,3925.0929 92.1442,0 0,-110.5652 36.8551,0 0,110.5652 18.421,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path240"
+       inkscape:connector-curvature="0" /><path
+       d="m 5805.0029,3980.382 -36.8551,-110.5652"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path242"
+       inkscape:connector-curvature="0" /><path
+       d="m 5768.1478,3980.382 -36.8551,-110.5652"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path244"
+       inkscape:connector-curvature="0" /><path
+       d="m 4828.3369,3869.8168 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path246"
+       inkscape:connector-curvature="0" /><path
+       d="m 5583.8724,3925.0929 165.8414,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path248"
+       inkscape:connector-curvature="0" /><path
+       d="m 4846.7709,3925.0929 294.8406,0 0,-110.5652 36.8551,0 0,110.5652 18.421,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path250"
+       inkscape:connector-curvature="0" /><path
+       d="m 5196.8876,3869.8168 18.4276,0 0,110.5652 -18.4276,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path252"
+       inkscape:connector-curvature="0" /><path
+       d="m 5215.3217,3925.0929 294.8406,0 0,-110.5652 36.855,0 0,110.5652 18.4211,0"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path254"
+       inkscape:connector-curvature="0" /><path
+       d="m 5565.4384,3869.8168 18.4275,0 0,110.5652 -18.4275,0 0,-110.5652 z"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path256"
+       inkscape:connector-curvature="0" /><path
+       d="m 6247.2638,4293.6437 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path258"
+       inkscape:connector-curvature="0" /><path
+       d="m 6247.2638,4183.0784 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path260"
+       inkscape:connector-curvature="0" /><path
+       d="m 6615.8145,4293.6437 0,-73.7102"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path262"
+       inkscape:connector-curvature="0" /><path
+       d="m 6615.8145,4183.0784 0,-73.7101"
+       style="fill:none;stroke:#000000;stroke-width:3.07125616;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path264"
+       inkscape:connector-curvature="0" /><text
+       y="-4035.6582"
+       x="1621.9453"
+       id="text268"
+       style="font-variant:normal;font-weight:normal;font-size:61.42512512px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan270"
+	 sodipodi:role="line"
+	 y="-4035.6582"
+	 x="1621.9453 1642.3999 1676.5522">(1)</tspan></text>
+<text
+       y="-4127.7959"
+       x="4199.7334"
+       id="text272"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan274"
+	 sodipodi:role="line"
+	 y="-4127.7959"
+	 x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732">874569101211322631262</tspan><tspan
+	 id="tspan276"
+	 sodipodi:role="line"
+	 y="-4238.3613"
+	 x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732">271270267268269272273275274266265263264262</tspan><tspan
+	 id="tspan278"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164">492315610111278</tspan><tspan
+	 id="tspan280"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296">492315610111278</tspan><tspan
+	 id="tspan282"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="841.81781 882.8006 923.78326">524</tspan><tspan
+	 id="tspan284"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="841.81781 882.8006 923.78326">261</tspan><tspan
+	 id="tspan286"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="1210.3684 1251.3512 1292.3342">525</tspan><tspan
+	 id="tspan288"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="1210.3684 1251.3512 1292.3342">262</tspan><tspan
+	 id="tspan290"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="6022.0161 6062.999">22</tspan><tspan
+	 id="tspan292"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="6022.0161 6062.999">22</tspan><tspan
+	 id="tspan294"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="6390.5669 6431.5498">23</tspan><tspan
+	 id="tspan296"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="6390.5669 6431.5498">23</tspan><tspan
+	 id="tspan298"
+	 sodipodi:role="line"
+	 y="-4238.3623"
+	 x="6001.5244 6042.5068 6083.4902">285</tspan><tspan
+	 id="tspan300"
+	 sodipodi:role="line"
+	 y="-4127.7964"
+	 x="6022.0156 6062.9985">22</tspan><tspan
+	 id="tspan302"
+	 sodipodi:role="line"
+	 y="-4238.3623"
+	 x="6370.0747 6411.0571 6452.04">286</tspan><tspan
+	 id="tspan304"
+	 sodipodi:role="line"
+	 y="-4127.7964"
+	 x="6390.5664 6431.5493">23</tspan><tspan
+	 id="tspan306"
+	 sodipodi:role="line"
+	 y="-4459.4922"
+	 x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365">1st field</tspan><tspan
+	 id="tspan308"
+	 sodipodi:role="line"
+	 y="-3648.6809"
+	 x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text>
+<text
+       y="-4127.7959"
+       x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732"
+       id="text3632"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3634"
+	 sodipodi:role="line"
+	 y="-4127.7959"
+	 x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732">874569101211322631262</tspan></text>
+<text
+       y="-4238.3613"
+       x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732"
+       id="text3636"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3638"
+	 sodipodi:role="line"
+	 y="-4238.3613"
+	 x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732">271270267268269272273275274266265263264262</tspan></text>
+<text
+       y="-5049.1729"
+       x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164"
+       id="text3640"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3642"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164">492315610111278</tspan></text>
+<text
+       y="-4938.6074"
+       x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296"
+       id="text3644"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3646"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296">492315610111278</tspan></text>
+<text
+       y="-5049.1729"
+       x="841.81781 882.8006 923.78326"
+       id="text3648"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3650"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="841.81781 882.8006 923.78326">524</tspan></text>
+<text
+       y="-4938.6074"
+       x="841.81781 882.8006 923.78326"
+       id="text3652"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3654"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="841.81781 882.8006 923.78326">261</tspan></text>
+<text
+       y="-5049.1729"
+       x="1210.3684 1251.3512 1292.3342"
+       id="text3656"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3658"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="1210.3684 1251.3512 1292.3342">525</tspan></text>
+<text
+       y="-4938.6074"
+       x="1210.3684 1251.3512 1292.3342"
+       id="text3660"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3662"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="1210.3684 1251.3512 1292.3342">262</tspan></text>
+<text
+       y="-5049.1729"
+       x="6022.0161 6062.999"
+       id="text3664"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3666"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="6022.0161 6062.999">22</tspan></text>
+<text
+       y="-4938.6074"
+       x="6022.0161 6062.999"
+       id="text3668"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3670"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="6022.0161 6062.999">22</tspan></text>
+<text
+       y="-5049.1729"
+       x="6390.5669 6431.5498"
+       id="text3672"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3674"
+	 sodipodi:role="line"
+	 y="-5049.1729"
+	 x="6390.5669 6431.5498">23</tspan></text>
+<text
+       y="-4938.6074"
+       x="6390.5669 6431.5498"
+       id="text3676"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3678"
+	 sodipodi:role="line"
+	 y="-4938.6074"
+	 x="6390.5669 6431.5498">23</tspan></text>
+<text
+       y="-4238.3623"
+       x="6001.5244 6042.5068 6083.4902"
+       id="text3680"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3682"
+	 sodipodi:role="line"
+	 y="-4238.3623"
+	 x="6001.5244 6042.5068 6083.4902">285</tspan></text>
+<text
+       y="-4127.7964"
+       x="6022.0156 6062.9985"
+       id="text3684"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3686"
+	 sodipodi:role="line"
+	 y="-4127.7964"
+	 x="6022.0156 6062.9985">22</tspan></text>
+<text
+       y="-4238.3623"
+       x="6370.0747 6411.0571 6452.04"
+       id="text3688"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3690"
+	 sodipodi:role="line"
+	 y="-4238.3623"
+	 x="6370.0747 6411.0571 6452.04">286</tspan></text>
+<text
+       y="-4127.7964"
+       x="6390.5664 6431.5493"
+       id="text3692"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3694"
+	 sodipodi:role="line"
+	 y="-4127.7964"
+	 x="6390.5664 6431.5493">23</tspan></text>
+<text
+       y="-4459.4922"
+       x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365"
+       id="text3696"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3698"
+	 sodipodi:role="line"
+	 y="-4459.4922"
+	 x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365">1st field</tspan></text>
+<text
+       y="-3648.6809"
+       x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463"
+       id="text3700"
+       style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"><tspan
+	 id="tspan3702"
+	 sodipodi:role="line"
+	 y="-3648.6809"
+	 x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text>
+</g></svg>
diff --git a/Documentation/userspace-api/media/v4l/vbi_625.svg b/Documentation/userspace-api/media/v4l/vbi_625.svg
new file mode 100644
index 000000000000..e1f5e8552c37
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vbi_625.svg
@@ -0,0 +1,870 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   xml:space="preserve"
+   width="209.46608mm"
+   height="51.576824mm"
+   viewBox="0 0 742.20265 182.75252"
+   sodipodi:docname="vbi_625.svg"><sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview4"
+     showgrid="false"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     inkscape:zoom="1.5350601"
+     inkscape:cx="288.91482"
+     inkscape:cy="170.67667"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="g10"
+     units="mm" /><metadata
+     id="metadata8"><rdf:RDF><cc:Work
+	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+     id="defs6"><clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath20"><path
+	 d="m 0,0 5950,0 0,4546 L 0,4546 0,0 Z m 0,4546 5950,0 0,1 -5950,0 0,-1 z m 0,1 2211,0 0,1 -2211,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2215,0 0,1 -2215,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2219,0 0,1 -2219,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2223,0 0,1 -2223,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2227,0 0,1 -2227,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2231,0 0,1 -2231,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2235,0 0,1 -2235,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2239,0 0,1 -2239,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2240,0 0,1 -2240,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2236,0 0,1 -2236,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2232,0 0,1 -2232,0 0,-1 z m
+2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2228,0 0,1 -2228,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2224,0 0,1 -2224,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2220,0 0,1 -2220,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2216,0 0,1 -2216,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2212,0 0,1 -2212,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2208,0 0,1 -2208,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,3854 -5950,0 0,-3854 z"
+	 id="path22"
+	 inkscape:connector-curvature="0" /></clipPath><clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath98"><path
+	 d="m 0,0 5950,0 0,3922 L 0,3922 0,0 Z m 0,3922 5950,0 0,1 -5950,0 0,-1 z m 0,1 2209,0 0,1 -2209,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2213,0 0,1 -2213,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2217,0 0,1 -2217,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2221,0 0,1 -2221,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2225,0 0,1 -2225,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2229,0 0,1 -2229,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2233,0 0,1 -2233,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2237,0 0,1 -2237,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2237,0 0,1 -2237,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2233,0 0,1 -2233,0 0,-1 z m
+2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2229,0 0,1 -2229,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2225,0 0,1 -2225,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2221,0 0,1 -2221,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2217,0 0,1 -2217,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2213,0 0,1 -2213,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2209,0 0,1 -2209,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,4478 -5950,0 0,-4478 z"
+	 id="path100"
+	 inkscape:connector-curvature="0" /></clipPath></defs><g
+     id="g10"
+     inkscape:groupmode="layer"
+     inkscape:label="vbi_625"
+     transform="matrix(0.125,0,0,-0.125,-87.571875,638.69874)"><g
+       id="g12"
+       transform="matrix(1.3045828,0,0,1.3045828,-213.38312,-1110.9872)"
+       style=""><path
+	 d="m 2132.25,4598.15 0,-85.05"
+	 style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 id="path14"
+	 inkscape:connector-curvature="0" /></g><g
+       id="g16"
+       transform="matrix(1.3045828,0,0,1.3045828,-213.38312,-1110.9872)"
+       style=""><g
+	 id="g18"
+	 clip-path="url(#clipPath20)"
+	 style=""><path
+	   d="m 2132.25,4555.63 113.4,0"
+	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   id="path24"
+	   inkscape:connector-curvature="0" /></g></g><path
+       inkscape:connector-curvature="0"
+       id="path28"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       d="m 2660.3649,4819.881 49.3132,12.3283 -49.3132,12.3283 0,-24.6566" /><path
+       inkscape:connector-curvature="0"
+       id="path30"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2660.3649,4819.881 49.3132,12.3283 -49.3132,12.3283 0,-24.6566 z" /><path
+       inkscape:connector-curvature="0"
+       id="path32"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1828.6151,4924.6651 0,73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path34"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2198.4643,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path36"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2568.3136,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path38"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2938.1628,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path40"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 3308.012,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path42"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 3677.8612,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path44"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4047.7105,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path46"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4417.5597,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path48"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4787.4089,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path50"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5157.2581,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path52"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5527.1073,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path54"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5896.9566,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path56"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1458.7659,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path58"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1828.6151,5035.6199 0,73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path60"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2198.4643,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path62"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2568.3136,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path64"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2938.1628,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path66"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 3308.012,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path68"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 3677.8612,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path70"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4047.7105,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path72"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4417.5597,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path74"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4787.4089,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path76"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5157.2581,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path78"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5527.1073,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path80"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5896.9566,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path82"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1458.7659,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path84"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 719.06744,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path86"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 719.06744,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path88"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1088.9167,4998.635 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path90"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1088.9167,5109.5897 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path92"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2568.3136,4074.0119 0,-110.9548" /><g
+       id="g94"
+       transform="matrix(1.3045828,0,0,1.3045828,-213.38312,-1110.9872)"
+       style=""><g
+	 id="g96"
+	 clip-path="url(#clipPath98)"
+	 style=""><path
+	   d="m 2132.25,3931.93 113.4,0"
+	   style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   id="path102"
+	   inkscape:connector-curvature="0" /></g></g><path
+       inkscape:connector-curvature="0"
+       id="path106"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       d="m 2660.365,4006.2129 49.3132,12.3283 -49.3132,12.3283 0,-24.6566" /><path
+       inkscape:connector-curvature="0"
+       id="path108"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2660.365,4006.2129 49.3132,12.3283 -49.3132,12.3283 0,-24.6566 z" /><path
+       inkscape:connector-curvature="0"
+       id="path110"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6266.806,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path112"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5896.9567,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path114"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5527.1075,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path116"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5157.2583,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path118"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4787.409,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path120"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4417.5598,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path122"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4047.7106,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path124"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 3677.8613,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path126"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 3308.0121,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path128"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2938.1629,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path130"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2568.3136,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path132"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2198.4644,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path134"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1828.6152,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path136"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1458.7659,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path138"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6266.806,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path140"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5896.9567,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path142"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5527.1075,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path144"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5157.2583,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path146"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4787.409,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path148"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4417.5598,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path150"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4047.7106,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path152"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 3677.8613,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path154"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 3308.0121,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path156"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2938.1629,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path158"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2568.3136,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path160"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 2198.4644,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path162"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1828.6152,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path164"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1458.7659,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path166"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 719.06746,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path168"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 719.06746,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path170"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1088.9167,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path172"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1088.9167,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path174"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1144.3876,4684.2698 18.4924,0 0,110.9548 -18.4924,0 0,-110.9548 z" /><path
+       inkscape:connector-curvature="0"
+       id="path176"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1070.4242,4739.7407 18.4925,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
+       inkscape:connector-curvature="0"
+       id="path178"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 700.575,4739.7407 18.49246,0 0,-110.9548 36.98492,0 0,110.9548 18.49247,0" /><path
+       inkscape:connector-curvature="0"
+       id="path180"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 809.886,4739.7407 3.28754,0" /><path
+       inkscape:connector-curvature="0"
+       id="path182"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 809.886,4739.7407 3.28754,0" /><path
+       inkscape:connector-curvature="0"
+       id="path184"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 774.54485,4684.2698 18.49246,0 0,110.9548 -18.49246,0 0,-110.9548 z" /><path
+       inkscape:connector-curvature="0"
+       id="path186"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 793.03731,4739.7407 18.49246,0 18.49246,73.9698 18.49246,-36.9849 18.49246,92.4688 18.49247,-55.4839 18.49246,18.499 18.49246,-36.9849 18.49246,55.4708 18.49246,-73.9698 18.49246,55.4839 18.49247,-73.9699 18.49241,110.9548 18.4925,-92.4688 18.4925,55.4839 18.4924,-55.4839 0,-36.9849" /><path
+       inkscape:connector-curvature="0"
+       id="path188"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1162.8865,4739.7407 18.486,0 0,92.4688 18.499,-18.499 18.4859,36.9849 18.499,-36.9849 18.4859,36.9849 18.499,-55.4708 18.4859,55.4708 18.499,-18.4859 18.486,55.4708 18.499,-55.4708 18.4859,18.4859 18.499,36.9849 18.4859,-73.9698 18.499,36.9849 18.4859,-55.4708 0,-55.4839 18.499,0 0,-110.9548 36.985,0 0,110.9548 18.4859,0 0,55.4839 18.499,36.9849 18.4859,-36.9849 18.499,55.4708 18.4859,-18.4859 18.499,55.4708 18.486,-18.4859 0,-129.4537 18.4989,0 0,-110.9548 18.486,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.985,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0
+0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.486,0 0,110.9548 166.4386,0 0,-110.9548 18.486,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 36.9849,0 0,110.9548 332.8643,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
+       inkscape:connector-curvature="0"
+       id="path190"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 700.575,3926.0723 18.49246,0 0,-110.9547 36.98492,0 0,110.9547 18.49247,0" /><path
+       inkscape:connector-curvature="0"
+       id="path192"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 774.54485,3870.6015 18.49246,0 0,110.9547 -18.49246,0 0,-110.9547 z" /><path
+       inkscape:connector-curvature="0"
+       id="path194"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 793.03731,3926.0723 18.49246,0 0,92.4689 18.49246,-36.985 18.49246,73.9699 18.49246,-73.9699 18.49247,73.9699 18.49246,-36.9849 18.49246,18.4859 18.49246,-73.9698 18.49246,55.4839 18.49246,-18.499 18.49247,36.9849 18.49241,-73.9698 18.4925,92.4688 18.4925,-92.4688 18.4924,55.4839 0,-92.4689" /><path
+       inkscape:connector-curvature="0"
+       id="path196"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1070.4242,3926.0723 18.4925,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
+       inkscape:connector-curvature="0"
+       id="path198"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1144.3876,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
+       inkscape:connector-curvature="0"
+       id="path200"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 1162.8865,3926.0723 18.486,0 0,55.4839 18.499,92.4558 18.4859,-55.4708 36.9849,36.9849 18.499,-55.4839 18.4859,18.499 18.499,-36.985 18.486,55.4709 18.499,-18.4859 18.4859,-36.985 18.499,18.486 18.4859,36.9849 18.499,-36.9849 18.4859,36.9849 0,-110.9548 18.499,0 0,-110.9547 18.486,0 0,110.9547 166.4386,0 0,-110.9547 18.486,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.985,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.486,0 0,110.9547 166.4386,0 0,-110.9547 18.486,0 0,110.9547 166.4387,0 0,-110.9547
+18.4859,0 0,110.9547 351.3633,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
+       inkscape:connector-curvature="0"
+       id="path202"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5453.1376,4795.2246 -36.9849,-110.9548" /><path
+       inkscape:connector-curvature="0"
+       id="path204"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5434.6387,4739.7407 92.4688,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
+       inkscape:connector-curvature="0"
+       id="path206"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5582.5784,4684.2698 18.4924,0 0,110.9548 -18.4924,0 0,-110.9548 z" /><path
+       inkscape:connector-curvature="0"
+       id="path208"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5601.0773,4739.7407 295.8794,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
+       inkscape:connector-curvature="0"
+       id="path210"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5952.4276,4684.2698 18.4924,0 0,110.9548 -18.4924,0 0,-110.9548 z" /><path
+       inkscape:connector-curvature="0"
+       id="path212"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5970.9266,4739.7407 129.4407,0 0,147.9396 18.499,-36.9849 18.4859,36.9849 18.499,-36.9849 18.4859,18.499 18.499,-36.9849 18.4859,36.9849 18.499,-36.9849 18.486,-18.499 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path214"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4842.8799,4684.2698 18.4924,0 0,110.9548 -18.4924,0 0,-110.9548 z" /><path
+       inkscape:connector-curvature="0"
+       id="path216"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4861.3789,4739.7407 295.8794,0 0,-110.9548 36.9849,0 0,110.9548 18.4859,0" /><path
+       inkscape:connector-curvature="0"
+       id="path218"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5212.7291,4684.2698 18.4925,0 0,110.9548 -18.4925,0 0,-110.9548 z" /><path
+       inkscape:connector-curvature="0"
+       id="path220"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5231.2281,4739.7407 166.4256,0" /><path
+       inkscape:connector-curvature="0"
+       id="path222"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5416.1527,4795.2246 -36.9849,-110.9548" /><path
+       inkscape:connector-curvature="0"
+       id="path224"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4473.0307,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
+       inkscape:connector-curvature="0"
+       id="path226"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4491.5296,3926.0723 295.8794,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
+       inkscape:connector-curvature="0"
+       id="path228"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4842.8799,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
+       inkscape:connector-curvature="0"
+       id="path230"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 4861.3789,3926.0723 295.8794,0 0,-110.9547 36.9849,0 0,110.9547 18.4859,0" /><path
+       inkscape:connector-curvature="0"
+       id="path232"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5212.7291,3870.6015 18.4925,0 0,110.9547 -18.4925,0 0,-110.9547 z" /><path
+       inkscape:connector-curvature="0"
+       id="path234"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5416.1527,3981.5562 -36.9849,-110.9547" /><path
+       inkscape:connector-curvature="0"
+       id="path236"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5231.2281,3926.0723 166.4256,0" /><path
+       inkscape:connector-curvature="0"
+       id="path238"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5453.1376,3981.5562 -36.9849,-110.9547" /><path
+       inkscape:connector-curvature="0"
+       id="path240"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5434.6387,3926.0723 92.4688,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
+       inkscape:connector-curvature="0"
+       id="path242"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5582.5784,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
+       inkscape:connector-curvature="0"
+       id="path244"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5601.0773,3926.0723 295.8794,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
+       inkscape:connector-curvature="0"
+       id="path246"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5952.4276,3870.6015 18.4924,0 0,110.9547 -18.4924,0 0,-110.9547 z" /><path
+       inkscape:connector-curvature="0"
+       id="path248"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 5970.9266,3926.0723 18.4859,0 0,73.9699 18.499,36.9849 18.4859,-36.9849 18.499,36.9849 18.486,-18.4859 18.4989,0 18.486,-36.985 18.499,55.4709 18.4859,-18.4859 0,36.9849 18.499,-18.499 18.4859,18.499 18.499,-36.9849 18.4859,18.4859 18.499,-55.4709 18.486,18.486 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path250"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6248.307,4739.7407 18.499,0 0,-110.9548 36.9849,0 0,110.9548 18.4859,0" /><path
+       inkscape:connector-curvature="0"
+       id="path252"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6248.307,3926.0723 18.499,0 0,-110.9547 36.9849,0 0,110.9547 18.4859,0" /><path
+       inkscape:connector-curvature="0"
+       id="path254"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6322.2768,3870.6015 18.4925,0 0,110.9547 -18.4925,0 0,-110.9547 z" /><path
+       inkscape:connector-curvature="0"
+       id="path256"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6322.2768,4684.2698 18.4925,0 0,110.9548 -18.4925,0 0,-110.9548 z" /><path
+       inkscape:connector-curvature="0"
+       id="path258"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6340.7758,4739.7407 18.4859,0 0,55.4839 18.499,55.4708 18.486,-92.4558 18.4989,55.4709 18.486,0 18.499,55.4839 18.4859,-73.9698 18.499,36.9849 18.4859,-36.9849 36.985,73.9698 18.4989,-36.9849 18.486,36.9849 18.499,-55.4839 18.4859,36.9849 0,-110.9547 18.499,0" /><path
+       inkscape:connector-curvature="0"
+       id="path260"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6340.7758,3926.0723 18.4859,0 0,129.4538 18.499,-18.499 18.486,18.499 18.4989,-36.9849 18.486,18.4859 18.499,-36.9849 18.4859,18.499 18.499,-18.499 18.4859,55.4839 18.499,-18.499 18.486,36.9849 18.4989,-73.9698 18.486,55.4839 18.499,-55.4839 18.4859,36.9849 0,-110.9548 18.499,0" /><path
+       inkscape:connector-curvature="0"
+       id="path262"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6636.6552,4184.9668 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path264"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6636.6552,4295.9216 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path266"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6266.806,4998.6351 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path268"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6266.806,5109.5899 0,-73.9699" /><path
+       inkscape:connector-curvature="0"
+       id="path270"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6636.6552,4998.6351 0,-73.9698" /><path
+       inkscape:connector-curvature="0"
+       id="path272"
+       style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 6636.6552,5109.5899 0,-73.9699" /><text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text276"
+       x="3550.4165"
+       y="-4462.3472"><tspan
+	 x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
+	 y="-4462.3472"
+	 sodipodi:role="line"
+	 id="tspan278">1st field</tspan><tspan
+	 x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
+	 y="-4943.1509"
+	 sodipodi:role="line"
+	 id="tspan280">1456783231231131022</tspan><tspan
+	 x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
+	 y="-5054.1064"
+	 sodipodi:role="line"
+	 id="tspan282">1456783262562462322</tspan><tspan
+	 x="842.29962 883.42694 924.55408"
+	 y="-4943.1509"
+	 sodipodi:role="line"
+	 id="tspan284">308</tspan><tspan
+	 x="842.29962 883.42694 924.55408"
+	 y="-5054.1064"
+	 sodipodi:role="line"
+	 id="tspan286">621</tspan><tspan
+	 x="1212.1489 1253.276 1294.4033"
+	 y="-4943.1509"
+	 sodipodi:role="line"
+	 id="tspan288">309</tspan><tspan
+	 x="1212.1489 1253.276 1294.4033"
+	 y="-5054.1064"
+	 sodipodi:role="line"
+	 id="tspan290">622</tspan><tspan
+	 x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
+	 y="-3648.6792"
+	 sodipodi:role="line"
+	 id="tspan292">2nd field</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:61.64153671px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text294"
+       x="2734.751"
+       y="-4037.021"><tspan
+	 x="2734.751 2755.2776 2789.5503"
+	 y="-4037.021"
+	 sodipodi:role="line"
+	 id="tspan296">(1)</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text298"
+       x="4951.772"
+       y="-4129.4834"><tspan
+	 x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+	 y="-4129.4834"
+	 sodipodi:role="line"
+	 id="tspan300">765432313312311</tspan><tspan
+	 x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+	 y="-4240.4385"
+	 sodipodi:role="line"
+	 id="tspan302">336335321320319318317316315314313312311</tspan><tspan
+	 x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
+	 y="-4129.4834"
+	 sodipodi:role="line"
+	 id="tspan304">182223309</tspan><tspan
+	 x="842.30634 883.43323 924.56055"
+	 y="-4240.4385"
+	 sodipodi:role="line"
+	 id="tspan306">309</tspan><tspan
+	 x="1212.1553 1253.2826 1294.4099"
+	 y="-4129.4834"
+	 sodipodi:role="line"
+	 id="tspan308">310</tspan><tspan
+	 x="1212.1553 1253.2826 1294.4099"
+	 y="-4240.4385"
+	 sodipodi:role="line"
+	 id="tspan310">310</tspan><tspan
+	 x="6410.605 6451.7319"
+	 y="-4129.4834"
+	 sodipodi:role="line"
+	 id="tspan312">24</tspan><tspan
+	 x="6390.041 6431.1685 6472.2954"
+	 y="-4240.4385"
+	 sodipodi:role="line"
+	 id="tspan314">337</tspan><tspan
+	 x="6040.7559 6081.8833"
+	 y="-4943.1504"
+	 sodipodi:role="line"
+	 id="tspan316">23</tspan><tspan
+	 x="6040.7559 6081.8833"
+	 y="-5054.106"
+	 sodipodi:role="line"
+	 id="tspan318">23</tspan><tspan
+	 x="6410.605 6451.7324"
+	 y="-4943.1504"
+	 sodipodi:role="line"
+	 id="tspan320">24</tspan><tspan
+	 x="6410.605 6451.7324"
+	 y="-5054.106"
+	 sodipodi:role="line"
+	 id="tspan322">24</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text3671"
+       x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
+       y="-4462.3472"><tspan
+	 x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
+	 y="-4462.3472"
+	 sodipodi:role="line"
+	 id="tspan3673">1st field</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text3675"
+       x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
+       y="-4943.1509"><tspan
+	 x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
+	 y="-4943.1509"
+	 sodipodi:role="line"
+	 id="tspan3677">1456783231231131022</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text3679"
+       x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
+       y="-5054.1064"><tspan
+	 x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
+	 y="-5054.1064"
+	 sodipodi:role="line"
+	 id="tspan3681">1456783262562462322</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text3683"
+       x="842.29962 883.42694 924.55408"
+       y="-4943.1509"><tspan
+	 x="842.29962 883.42694 924.55408"
+	 y="-4943.1509"
+	 sodipodi:role="line"
+	 id="tspan3685">308</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text3687"
+       x="842.29962 883.42694 924.55408"
+       y="-5054.1064"><tspan
+	 x="842.29962 883.42694 924.55408"
+	 y="-5054.1064"
+	 sodipodi:role="line"
+	 id="tspan3689">621</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text3691"
+       x="1212.1489 1253.276 1294.4033"
+       y="-4943.1509"><tspan
+	 x="1212.1489 1253.276 1294.4033"
+	 y="-4943.1509"
+	 sodipodi:role="line"
+	 id="tspan3693">309</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text3695"
+       x="1212.1489 1253.276 1294.4033"
+       y="-5054.1064"><tspan
+	 x="1212.1489 1253.276 1294.4033"
+	 y="-5054.1064"
+	 sodipodi:role="line"
+	 id="tspan3697">622</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text3699"
+       x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
+       y="-3648.6792"><tspan
+	 x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
+	 y="-3648.6792"
+	 sodipodi:role="line"
+	 id="tspan3701">2nd field</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4083"
+       x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+       y="-4129.4834"><tspan
+	 x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+	 y="-4129.4834"
+	 sodipodi:role="line"
+	 id="tspan4085">765432313312311</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4087"
+       x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+       y="-4240.4385"><tspan
+	 x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+	 y="-4240.4385"
+	 sodipodi:role="line"
+	 id="tspan4089">336335321320319318317316315314313312311</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4091"
+       x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
+       y="-4129.4834"><tspan
+	 x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
+	 y="-4129.4834"
+	 sodipodi:role="line"
+	 id="tspan4093">182223309</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4095"
+       x="842.30634 883.43323 924.56055"
+       y="-4240.4385"><tspan
+	 x="842.30634 883.43323 924.56055"
+	 y="-4240.4385"
+	 sodipodi:role="line"
+	 id="tspan4097">309</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4099"
+       x="1212.1553 1253.2826 1294.4099"
+       y="-4129.4834"><tspan
+	 x="1212.1553 1253.2826 1294.4099"
+	 y="-4129.4834"
+	 sodipodi:role="line"
+	 id="tspan4101">310</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4103"
+       x="1212.1553 1253.2826 1294.4099"
+       y="-4240.4385"><tspan
+	 x="1212.1553 1253.2826 1294.4099"
+	 y="-4240.4385"
+	 sodipodi:role="line"
+	 id="tspan4105">310</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4107"
+       x="6410.605 6451.7319"
+       y="-4129.4834"><tspan
+	 x="6410.605 6451.7319"
+	 y="-4129.4834"
+	 sodipodi:role="line"
+	 id="tspan4109">24</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4111"
+       x="6390.041 6431.1685 6472.2954"
+       y="-4240.4385"><tspan
+	 x="6390.041 6431.1685 6472.2954"
+	 y="-4240.4385"
+	 sodipodi:role="line"
+	 id="tspan4113">337</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4115"
+       x="6040.7559 6081.8833"
+       y="-4943.1504"><tspan
+	 x="6040.7559 6081.8833"
+	 y="-4943.1504"
+	 sodipodi:role="line"
+	 id="tspan4117">23</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4119"
+       x="6040.7559 6081.8833"
+       y="-5054.106"><tspan
+	 x="6040.7559 6081.8833"
+	 y="-5054.106"
+	 sodipodi:role="line"
+	 id="tspan4121">23</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4123"
+       x="6410.605 6451.7324"
+       y="-4943.1504"><tspan
+	 x="6410.605 6451.7324"
+	 y="-4943.1504"
+	 sodipodi:role="line"
+	 id="tspan4125">24</tspan></text>
+<text
+       transform="scale(1,-1)"
+       style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       id="text4127"
+       x="6410.605 6451.7324"
+       y="-5054.106"><tspan
+	 x="6410.605 6451.7324"
+	 y="-5054.106"
+	 sodipodi:role="line"
+	 id="tspan4129">24</tspan></text>
+</g></svg>
diff --git a/Documentation/userspace-api/media/v4l/vbi_hsync.svg b/Documentation/userspace-api/media/v4l/vbi_hsync.svg
new file mode 100644
index 000000000000..77606a7b00a4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vbi_hsync.svg
@@ -0,0 +1,321 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!--
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation, with no Invariant Sections, no Front-Cover Texts
+    and no Back-Cover Texts. A copy of the license is included at
+    Documentation/userspace-api/media/fdl-appendix.rst.
+
+    TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+-->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.91 r13725"
+   xml:space="preserve"
+   width="192.39857mm"
+   height="146.83536mm"
+   viewBox="0 0 681.72724 520.28277"
+   sodipodi:docname="vbi_hsync.svg"><sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1920"
+     inkscape:window-height="997"
+     id="namedview4"
+     showgrid="false"
+     inkscape:zoom="1.5350601"
+     inkscape:cx="131.95463"
+     inkscape:cy="428.88132"
+     inkscape:window-x="1920"
+     inkscape:window-y="30"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="g10"
+     units="mm"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0" /><metadata
+     id="metadata8"><rdf:RDF><cc:Work
+	 rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+     id="defs6"><clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath30"><path
+	 d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 187.184,836.05 0,-19.278 48.517,0 -38.556,9.639 38.556,9.639 -48.517,0 z m 689.189,-19.278 0,19.278 -48.516,0 38.556,-9.639 -38.556,-9.639 48.516,0 z"
+	 id="path32"
+	 inkscape:connector-curvature="0"
+	 style="clip-rule:evenodd" /></clipPath><clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath52"><path
+	 d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 804.08,79.3887 0,19.2778 -48.516,0 38.556,-9.6389 -38.556,-9.6389 48.516,0 z m -703.647,19.2778 0,-19.2778 48.517,0 -38.556,9.6389 38.556,9.6389 -48.517,0 z"
+	 id="path54"
+	 inkscape:connector-curvature="0"
+	 style="clip-rule:evenodd" /></clipPath><clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath94"><path
+	 d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 471.535,195.057 0,19.278 -48.516,0 38.555,-9.639 -38.555,-9.639 48.516,0 z m -284.351,19.278 0,-19.278 48.517,0 -38.556,9.639 38.556,9.639 -48.517,0 z"
+	 id="path96"
+	 inkscape:connector-curvature="0"
+	 style="clip-rule:evenodd" /></clipPath></defs><g
+     id="g10"
+     inkscape:groupmode="layer"
+     inkscape:label="vbi_hsync"
+     transform="matrix(1.25,0,0,-1.25,-0.3625824,520.79867)"><g
+       id="g14"
+       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
+       style=""><path
+	 inkscape:connector-curvature="0"
+	 id="path16"
+	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="M 32.9604,580.617 4.04346,493.866" /><path
+	 inkscape:connector-curvature="0"
+	 id="path18"
+	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 192.004,855.328 0,-665.091" /><path
+	 inkscape:connector-curvature="0"
+	 id="path20"
+	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 466.715,392.656 0,-202.419" /><path
+	 inkscape:connector-curvature="0"
+	 id="path22"
+	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 799.261,508.324 0,-433.7549" /><path
+	 inkscape:connector-curvature="0"
+	 id="path24"
+	 style="fill:none;stroke:#000000;stroke-width:4.81949997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 857.095,537.241 231.335,0" /></g><g
+       id="g26"
+       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
+       style=""><g
+	 clip-path="url(#clipPath30)"
+	 id="g28"
+	 style=""><path
+	   inkscape:connector-curvature="0"
+	   id="path34"
+	   style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   d="m 871.553,826.411 -679.549,0" /></g></g><g
+       id="g36"
+       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
+       style=""><path
+	 inkscape:connector-curvature="0"
+	 id="path38"
+	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+	 d="m 827.857,816.772 38.556,9.639 -38.556,9.639 0,-19.278" /><path
+	 inkscape:connector-curvature="0"
+	 id="path40"
+	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 827.857,816.772 38.556,9.639 -38.556,9.639 0,-19.278 z" /><path
+	 inkscape:connector-curvature="0"
+	 id="path42"
+	 style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+	 d="m 235.701,836.05 -38.556,-9.639 38.556,-9.639 0,19.278" /><path
+	 inkscape:connector-curvature="0"
+	 id="path44"
+	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 235.701,836.05 -38.556,-9.639 38.556,-9.639 0,19.278 z" /><path
+	 inkscape:connector-curvature="0"
+	 id="path46"
+	 style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	 d="m 1073.97,493.866 28.92,86.751" /></g><g
+       id="g48"
+       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
+       style=""><g
+	 clip-path="url(#clipPath52)"
+	 id="g50"
+	 style=""><path
+	   inkscape:connector-curvature="0"
+	   id="path56"
+	   style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   d="m 105.253,89.0276 694.008,0" /></g></g><path
+       d="m 52.91205,34.475403 -13.891817,-3.472918 13.891817,-3.472918 0,6.945836"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path60"
+       inkscape:connector-curvature="0" /><path
+       d="m 52.91205,34.475403 -13.891817,-3.472918 13.891817,-3.472918 0,6.945836 z"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path62"
+       inkscape:connector-curvature="0" /><path
+       d="m 271.4765,27.529567 13.89182,3.472918 -13.89182,3.472918 0,-6.945836"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path64"
+       inkscape:connector-curvature="0" /><path
+       d="m 271.4765,27.529567 13.89182,3.472918 -13.89182,3.472918 0,-6.945836 z"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path66"
+       inkscape:connector-curvature="0" /><path
+       d="m 5.9113292,192.49483 31.2565888,0 0,-10.41887 26.046978,0 10.418863,-93.769765 88.560511,0 10.41887,93.769765 10.41886,0"
+       style="fill:none;stroke:#000000;stroke-width:1.73647714;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path68"
+       inkscape:connector-curvature="0" /><path
+       d="m 162.19427,88.306195 260.47086,0"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path70"
+       inkscape:connector-curvature="0" /><path
+       d="m 37.167918,182.07596 0,-156.282907"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path72"
+       inkscape:connector-curvature="0" /><path
+       d="m 235.12632,182.07596 52.09431,0 0,10.41887 20.83773,0 10.41886,208.3769 83.35162,0"
+       style="fill:none;stroke:#000000;stroke-width:1.73647714;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path74"
+       inkscape:connector-curvature="0" /><path
+       d="m 391.4089,192.49483 31.25623,0"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path76"
+       inkscape:connector-curvature="0" /><path
+       d="m 401.82884,400.87173 20.83629,0"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path78"
+       inkscape:connector-curvature="0" /><path
+       d="m 328.89608,192.49483 10.41887,208.3769"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path80"
+       inkscape:connector-curvature="0" /><path
+       d="m 349.73381,192.49483 10.41886,208.3769"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path82"
+       inkscape:connector-curvature="0" /><path
+       d="m 370.57262,192.49483 10.41634,208.3769"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path84"
+       inkscape:connector-curvature="0" /><path
+       d="m 396.61887,385.24541 10.41995,31.25623"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path86"
+       inkscape:connector-curvature="0" /><path
+       d="m 183.032,135.19126 52.09432,0 0,93.76977 -52.09432,0 0,-93.76977 z"
+       style="fill:none;stroke:#000000;stroke-width:1.73647714;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path88"
+       inkscape:connector-curvature="0" /><g
+       id="g90"
+       transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
+       style=""><g
+	 clip-path="url(#clipPath94)"
+	 id="g92"
+	 style=""><path
+	   inkscape:connector-curvature="0"
+	   id="path98"
+	   style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+	   d="m 192.004,204.696 274.711,0" /></g></g><path
+       d="m 84.168639,76.151036 -13.891817,-3.472955 13.891817,-3.472954 0,6.945909"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path102"
+       inkscape:connector-curvature="0" /><path
+       d="m 84.168639,76.151036 -13.891817,-3.472955 13.891817,-3.472954 0,6.945909 z"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path104"
+       inkscape:connector-curvature="0" /><path
+       d="m 151.65975,69.205127 13.89146,3.472954 -13.89146,3.472955 0,-6.945909"
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+       id="path106"
+       inkscape:connector-curvature="0" /><path
+       d="m 151.65975,69.205127 13.89146,3.472954 -13.89146,3.472955 0,-6.945909 z"
+       style="fill:none;stroke:#000000;stroke-width:0.86823857;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       id="path108"
+       inkscape:connector-curvature="0" /><text
+       id="text112"
+       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"
+       x="438.29504"
+       y="-187.28558"><tspan
+	 id="tspan114"
+	 sodipodi:role="line"
+	 y="-187.28558"
+	 x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234">Black Level</tspan><tspan
+	 id="tspan116"
+	 sodipodi:role="line"
+	 y="-83.096947"
+	 x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636">Sync Level</tspan><tspan
+	 id="tspan118"
+	 sodipodi:role="line"
+	 y="-395.66284"
+	 x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text>
+<text
+       id="text120"
+       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"
+       x="159.88258"
+       y="-270.63647"><tspan
+	 id="tspan122"
+	 sodipodi:role="line"
+	 y="-270.63647"
+	 x="159.88258 172.61443 179.55339 186.49236 198.07812 209.66391">offset</tspan></text>
+<text
+       id="text124"
+       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"
+       x="46.973549"
+       y="-46.630745"><tspan
+	 id="tspan126"
+	 sodipodi:role="line"
+	 y="-46.630745"
+	 x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319">Line synchr. pulse</tspan><tspan
+	 id="tspan128"
+	 sodipodi:role="line"
+	 y="-4.9552913"
+	 x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788">Line blanking</tspan></text>
+<text
+       id="text3473"
+       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"
+       x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319"
+       y="-46.630745"><tspan
+	 id="tspan3475"
+	 sodipodi:role="line"
+	 y="-46.630745"
+	 x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319">Line synchr. pulse</tspan></text>
+<text
+       id="text3477"
+       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"
+       x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788"
+       y="-4.9552913"><tspan
+	 id="tspan3479"
+	 sodipodi:role="line"
+	 y="-4.9552913"
+	 x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788">Line blanking</tspan></text>
+<text
+       id="text3607"
+       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"
+       x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234"
+       y="-187.28558"><tspan
+	 id="tspan3609"
+	 sodipodi:role="line"
+	 y="-187.28558"
+	 x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234">Black Level</tspan></text>
+<text
+       id="text3611"
+       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"
+       x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636"
+       y="-83.096947"><tspan
+	 id="tspan3613"
+	 sodipodi:role="line"
+	 y="-83.096947"
+	 x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636">Sync Level</tspan></text>
+<text
+       id="text3615"
+       style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
+       transform="scale(1,-1)"
+       x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533"
+       y="-395.66284"><tspan
+	 id="tspan3617"
+	 sodipodi:role="line"
+	 y="-395.66284"
+	 x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text>
+</g></svg>
diff --git a/Documentation/userspace-api/media/v4l/video.rst b/Documentation/userspace-api/media/v4l/video.rst
new file mode 100644
index 000000000000..9b73dba0eb8d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/video.rst
@@ -0,0 +1,75 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _video:
+
+************************
+Video Inputs and Outputs
+************************
+
+Video inputs and outputs are physical connectors of a device. These can
+be for example: RF connectors (antenna/cable), CVBS a.k.a. Composite
+Video, S-Video and RGB connectors. Camera sensors are also considered to
+be a video input. Video and VBI capture devices have inputs. Video and
+VBI output devices have outputs, at least one each. Radio devices have
+no video inputs or outputs.
+
+To learn about the number and attributes of the available inputs and
+outputs applications can enumerate them with the
+:ref:`VIDIOC_ENUMINPUT` and
+:ref:`VIDIOC_ENUMOUTPUT` ioctl, respectively. The
+struct :c:type:`v4l2_input` returned by the
+:ref:`VIDIOC_ENUMINPUT` ioctl also contains signal
+status information applicable when the current video input is queried.
+
+The :ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` and
+:ref:`VIDIOC_G_OUTPUT <VIDIOC_G_OUTPUT>` ioctls return the index of
+the current video input or output. To select a different input or output
+applications call the :ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` and
+:ref:`VIDIOC_S_OUTPUT <VIDIOC_G_OUTPUT>` ioctls. Drivers must
+implement all the input ioctls when the device has one or more inputs,
+all the output ioctls when the device has one or more outputs.
+
+Example: Information about the current video input
+==================================================
+
+.. code-block:: c
+
+    struct v4l2_input input;
+    int index;
+
+    if (-1 == ioctl(fd, VIDIOC_G_INPUT, &index)) {
+	perror("VIDIOC_G_INPUT");
+	exit(EXIT_FAILURE);
+    }
+
+    memset(&input, 0, sizeof(input));
+    input.index = index;
+
+    if (-1 == ioctl(fd, VIDIOC_ENUMINPUT, &input)) {
+	perror("VIDIOC_ENUMINPUT");
+	exit(EXIT_FAILURE);
+    }
+
+    printf("Current input: %s\\n", input.name);
+
+
+Example: Switching to the first video input
+===========================================
+
+.. code-block:: c
+
+    int index;
+
+    index = 0;
+
+    if (-1 == ioctl(fd, VIDIOC_S_INPUT, &index)) {
+	perror("VIDIOC_S_INPUT");
+	exit(EXIT_FAILURE);
+    }
diff --git a/Documentation/userspace-api/media/v4l/videodev.rst b/Documentation/userspace-api/media/v4l/videodev.rst
new file mode 100644
index 000000000000..c8244b895802
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/videodev.rst
@@ -0,0 +1,16 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _videodev:
+
+*******************************
+Video For Linux Two Header File
+*******************************
+
+.. kernel-include:: $BUILDDIR/videodev2.h.rst
diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
new file mode 100644
index 000000000000..e1afc5b504c2
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
@@ -0,0 +1,141 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_CREATE_BUFS:
+
+************************
+ioctl VIDIOC_CREATE_BUFS
+************************
+
+Name
+====
+
+VIDIOC_CREATE_BUFS - Create buffers for Memory Mapped or User Pointer or DMA Buffer I/O
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_CREATE_BUFS, struct v4l2_create_buffers *argp )
+    :name: VIDIOC_CREATE_BUFS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_create_buffers`.
+
+
+Description
+===========
+
+This ioctl is used to create buffers for :ref:`memory mapped <mmap>`
+or :ref:`user pointer <userp>` or :ref:`DMA buffer <dmabuf>` I/O. It
+can be used as an alternative or in addition to the
+:ref:`VIDIOC_REQBUFS` ioctl, when a tighter control
+over buffers is required. This ioctl can be called multiple times to
+create buffers of different sizes.
+
+To allocate the device buffers applications must initialize the relevant
+fields of the struct :c:type:`v4l2_create_buffers` structure. The
+``count`` field must be set to the number of requested buffers, the
+``memory`` field specifies the requested I/O method and the ``reserved``
+array must be zeroed.
+
+The ``format`` field specifies the image format that the buffers must be
+able to handle. The application has to fill in this struct
+:c:type:`v4l2_format`. Usually this will be done using the
+:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` or
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctls to ensure that the
+requested format is supported by the driver. Based on the format's
+``type`` field the requested buffer size (for single-planar) or plane
+sizes (for multi-planar formats) will be used for the allocated buffers.
+The driver may return an error if the size(s) are not supported by the
+hardware (usually because they are too small).
+
+The buffers created by this ioctl will have as minimum size the size
+defined by the ``format.pix.sizeimage`` field (or the corresponding
+fields for other format types). Usually if the ``format.pix.sizeimage``
+field is less than the minimum required for the given format, then an
+error will be returned since drivers will typically not allow this. If
+it is larger, then the value will be used as-is. In other words, the
+driver may reject the requested size, but if it is accepted the driver
+will use it unchanged.
+
+When the ioctl is called with a pointer to this structure the driver
+will attempt to allocate up to the requested number of buffers and store
+the actual number allocated and the starting index in the ``count`` and
+the ``index`` fields respectively. On return ``count`` can be smaller
+than the number requested.
+
+
+.. c:type:: v4l2_create_buffers
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_create_buffers
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - The starting buffer index, returned by the driver.
+    * - __u32
+      - ``count``
+      - The number of buffers requested or granted. If count == 0, then
+	:ref:`VIDIOC_CREATE_BUFS` will set ``index`` to the current number of
+	created buffers, and it will check the validity of ``memory`` and
+	``format.type``. If those are invalid -1 is returned and errno is
+	set to ``EINVAL`` error code, otherwise :ref:`VIDIOC_CREATE_BUFS` returns
+	0. It will never set errno to ``EBUSY`` error code in this particular
+	case.
+    * - __u32
+      - ``memory``
+      - Applications set this field to ``V4L2_MEMORY_MMAP``,
+	``V4L2_MEMORY_DMABUF`` or ``V4L2_MEMORY_USERPTR``. See
+	:c:type:`v4l2_memory`
+    * - struct :c:type:`v4l2_format`
+      - ``format``
+      - Filled in by the application, preserved by the driver.
+    * - __u32
+      - ``capabilities``
+      - Set by the driver. If 0, then the driver doesn't support
+        capabilities. In that case all you know is that the driver is
+	guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support
+	other :c:type:`v4l2_memory` types. It will not support any other
+	capabilities. See :ref:`here <v4l2-buf-capabilities>` for a list of the
+	capabilities.
+
+	If you want to just query the capabilities without making any
+	other changes, then set ``count`` to 0, ``memory`` to
+	``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type.
+    * - __u32
+      - ``reserved``\ [7]
+      - A place holder for future extensions. Drivers and applications
+	must set the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+ENOMEM
+    No memory to allocate buffers for :ref:`memory mapped <mmap>` I/O.
+
+EINVAL
+    The buffer type (``format.type`` field), requested I/O method
+    (``memory``) or format (``format`` field) is not valid.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst
new file mode 100644
index 000000000000..035ed9d577ae
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst
@@ -0,0 +1,143 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_CROPCAP:
+
+********************
+ioctl VIDIOC_CROPCAP
+********************
+
+Name
+====
+
+VIDIOC_CROPCAP - Information about the video cropping and scaling abilities
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_CROPCAP, struct v4l2_cropcap *argp )
+    :name: VIDIOC_CROPCAP
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_cropcap`.
+
+
+Description
+===========
+
+Applications use this function to query the cropping limits, the pixel
+aspect of images and to calculate scale factors. They set the ``type``
+field of a v4l2_cropcap structure to the respective buffer (stream)
+type and call the :ref:`VIDIOC_CROPCAP` ioctl with a pointer to this
+structure. Drivers fill the rest of the structure. The results are
+constant except when switching the video standard. Remember this switch
+can occur implicit when switching the video input or output.
+
+This ioctl must be implemented for video capture or output devices that
+support cropping and/or scaling and/or have non-square pixels, and for
+overlay devices.
+
+.. c:type:: v4l2_cropcap
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_cropcap
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Type of the data stream, set by the application. Only these types
+	are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
+	``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and
+	``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note below.
+    * - struct :ref:`v4l2_rect <v4l2-rect-crop>`
+      - ``bounds``
+      - Defines the window within capturing or output is possible, this
+	may exclude for example the horizontal and vertical blanking
+	areas. The cropping rectangle cannot exceed these limits. Width
+	and height are defined in pixels, the driver writer is free to
+	choose origin and units of the coordinate system in the analog
+	domain.
+    * - struct :ref:`v4l2_rect <v4l2-rect-crop>`
+      - ``defrect``
+      - Default cropping rectangle, it shall cover the "whole picture".
+	Assuming pixel aspect 1/1 this could be for example a 640 × 480
+	rectangle for NTSC, a 768 × 576 rectangle for PAL and SECAM
+	centered over the active picture area. The same co-ordinate system
+	as for ``bounds`` is used.
+    * - struct :c:type:`v4l2_fract`
+      - ``pixelaspect``
+      - This is the pixel aspect (y / x) when no scaling is applied, the
+	ratio of the actual sampling frequency and the frequency required
+	to get square pixels.
+
+	When cropping coordinates refer to square pixels, the driver sets
+	``pixelaspect`` to 1/1. Other common values are 54/59 for PAL and
+	SECAM, 11/10 for NTSC sampled according to [:ref:`itu601`].
+
+.. note::
+   Unfortunately in the case of multiplanar buffer types
+   (``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``)
+   this API was messed up with regards to how the :c:type:`v4l2_cropcap` ``type`` field
+   should be filled in. Some drivers only accepted the ``_MPLANE`` buffer type while
+   other drivers only accepted a non-multiplanar buffer type (i.e. without the
+   ``_MPLANE`` at the end).
+
+   Starting with kernel 4.13 both variations are allowed.
+
+
+
+.. _v4l2-rect-crop:
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_rect
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __s32
+      - ``left``
+      - Horizontal offset of the top, left corner of the rectangle, in
+	pixels.
+    * - __s32
+      - ``top``
+      - Vertical offset of the top, left corner of the rectangle, in
+	pixels.
+    * - __u32
+      - ``width``
+      - Width of the rectangle, in pixels.
+    * - __u32
+      - ``height``
+      - Height of the rectangle, in pixels.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_cropcap` ``type`` is
+    invalid.
+
+ENODATA
+    Cropping is not supported for this input or output.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst
new file mode 100644
index 000000000000..16078a2d3e3d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst
@@ -0,0 +1,167 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_DBG_G_CHIP_INFO:
+
+****************************
+ioctl VIDIOC_DBG_G_CHIP_INFO
+****************************
+
+Name
+====
+
+VIDIOC_DBG_G_CHIP_INFO - Identify the chips on a TV card
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_DBG_G_CHIP_INFO, struct v4l2_dbg_chip_info *argp )
+    :name: VIDIOC_DBG_G_CHIP_INFO
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_dbg_chip_info`.
+
+
+Description
+===========
+
+.. note::
+
+    This is an :ref:`experimental` interface and may
+    change in the future.
+
+For driver debugging purposes this ioctl allows test applications to
+query the driver about the chips present on the TV card. Regular
+applications must not use it. When you found a chip specific bug, please
+contact the linux-media mailing list
+(`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__)
+so it can be fixed.
+
+Additionally the Linux kernel must be compiled with the
+``CONFIG_VIDEO_ADV_DEBUG`` option to enable this ioctl.
+
+To query the driver applications must initialize the ``match.type`` and
+``match.addr`` or ``match.name`` fields of a struct
+:c:type:`v4l2_dbg_chip_info` and call
+:ref:`VIDIOC_DBG_G_CHIP_INFO` with a pointer to this structure. On success
+the driver stores information about the selected chip in the ``name``
+and ``flags`` fields.
+
+When ``match.type`` is ``V4L2_CHIP_MATCH_BRIDGE``, ``match.addr``
+selects the nth bridge 'chip' on the TV card. You can enumerate all
+chips by starting at zero and incrementing ``match.addr`` by one until
+:ref:`VIDIOC_DBG_G_CHIP_INFO` fails with an ``EINVAL`` error code. The number
+zero always selects the bridge chip itself, e. g. the chip connected to
+the PCI or USB bus. Non-zero numbers identify specific parts of the
+bridge chip such as an AC97 register block.
+
+When ``match.type`` is ``V4L2_CHIP_MATCH_SUBDEV``, ``match.addr``
+selects the nth sub-device. This allows you to enumerate over all
+sub-devices.
+
+On success, the ``name`` field will contain a chip name and the
+``flags`` field will contain ``V4L2_CHIP_FL_READABLE`` if the driver
+supports reading registers from the device or ``V4L2_CHIP_FL_WRITABLE``
+if the driver supports writing registers to the device.
+
+We recommended the v4l2-dbg utility over calling this ioctl directly. It
+is available from the LinuxTV v4l-dvb repository; see
+`https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
+instructions.
+
+
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+
+.. _name-v4l2-dbg-match:
+
+.. flat-table:: struct v4l2_dbg_match
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - See :ref:`name-chip-match-types` for a list of possible types.
+    * - union {
+      - (anonymous)
+    * - __u32
+      - ``addr``
+      - Match a chip by this number, interpreted according to the ``type``
+	field.
+    * - char
+      - ``name[32]``
+      - Match a chip by this name, interpreted according to the ``type``
+	field. Currently unused.
+    * - }
+      -
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_dbg_chip_info
+
+.. flat-table:: struct v4l2_dbg_chip_info
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - struct v4l2_dbg_match
+      - ``match``
+      - How to match the chip, see :ref:`name-v4l2-dbg-match`.
+    * - char
+      - ``name[32]``
+      - The name of the chip.
+    * - __u32
+      - ``flags``
+      - Set by the driver. If ``V4L2_CHIP_FL_READABLE`` is set, then the
+	driver supports reading registers from the device. If
+	``V4L2_CHIP_FL_WRITABLE`` is set, then it supports writing
+	registers.
+    * - __u32
+      - ``reserved[8]``
+      - Reserved fields, both application and driver must set these to 0.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _name-chip-match-types:
+
+.. flat-table:: Chip Match Types
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_CHIP_MATCH_BRIDGE``
+      - 0
+      - Match the nth chip on the card, zero for the bridge chip. Does not
+	match sub-devices.
+    * - ``V4L2_CHIP_MATCH_SUBDEV``
+      - 4
+      - Match the nth sub-device.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The ``match_type`` is invalid or no device could be matched.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst
new file mode 100644
index 000000000000..6311a63278a5
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst
@@ -0,0 +1,171 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_DBG_G_REGISTER:
+
+**************************************************
+ioctl VIDIOC_DBG_G_REGISTER, VIDIOC_DBG_S_REGISTER
+**************************************************
+
+Name
+====
+
+VIDIOC_DBG_G_REGISTER - VIDIOC_DBG_S_REGISTER - Read or write hardware registers
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_DBG_G_REGISTER, struct v4l2_dbg_register *argp )
+    :name: VIDIOC_DBG_G_REGISTER
+
+.. c:function:: int ioctl( int fd, VIDIOC_DBG_S_REGISTER, const struct v4l2_dbg_register *argp )
+    :name: VIDIOC_DBG_S_REGISTER
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_dbg_register`.
+
+
+Description
+===========
+
+.. note::
+
+    This is an :ref:`experimental` interface and may
+    change in the future.
+
+For driver debugging purposes these ioctls allow test applications to
+access hardware registers directly. Regular applications must not use
+them.
+
+Since writing or even reading registers can jeopardize the system
+security, its stability and damage the hardware, both ioctls require
+superuser privileges. Additionally the Linux kernel must be compiled
+with the ``CONFIG_VIDEO_ADV_DEBUG`` option to enable these ioctls.
+
+To write a register applications must initialize all fields of a struct
+:c:type:`v4l2_dbg_register` except for ``size`` and
+call ``VIDIOC_DBG_S_REGISTER`` with a pointer to this structure. The
+``match.type`` and ``match.addr`` or ``match.name`` fields select a chip
+on the TV card, the ``reg`` field specifies a register number and the
+``val`` field the value to be written into the register.
+
+To read a register applications must initialize the ``match.type``,
+``match.addr`` or ``match.name`` and ``reg`` fields, and call
+``VIDIOC_DBG_G_REGISTER`` with a pointer to this structure. On success
+the driver stores the register value in the ``val`` field and the size
+(in bytes) of the value in ``size``.
+
+When ``match.type`` is ``V4L2_CHIP_MATCH_BRIDGE``, ``match.addr``
+selects the nth non-sub-device chip on the TV card. The number zero
+always selects the host chip, e. g. the chip connected to the PCI or USB
+bus. You can find out which chips are present with the
+:ref:`VIDIOC_DBG_G_CHIP_INFO` ioctl.
+
+When ``match.type`` is ``V4L2_CHIP_MATCH_SUBDEV``, ``match.addr``
+selects the nth sub-device.
+
+These ioctls are optional, not all drivers may support them. However
+when a driver supports these ioctls it must also support
+:ref:`VIDIOC_DBG_G_CHIP_INFO`. Conversely
+it may support ``VIDIOC_DBG_G_CHIP_INFO`` but not these ioctls.
+
+``VIDIOC_DBG_G_REGISTER`` and ``VIDIOC_DBG_S_REGISTER`` were introduced
+in Linux 2.6.21, but their API was changed to the one described here in
+kernel 2.6.29.
+
+We recommended the v4l2-dbg utility over calling these ioctls directly.
+It is available from the LinuxTV v4l-dvb repository; see
+`https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
+instructions.
+
+
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+
+.. c:type:: v4l2_dbg_match
+
+.. flat-table:: struct v4l2_dbg_match
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - See :ref:`chip-match-types` for a list of possible types.
+    * - union {
+      - (anonymous)
+    * - __u32
+      - ``addr``
+      - Match a chip by this number, interpreted according to the ``type``
+	field.
+    * - char
+      - ``name[32]``
+      - Match a chip by this name, interpreted according to the ``type``
+	field. Currently unused.
+    * - }
+      -
+
+
+
+.. c:type:: v4l2_dbg_register
+
+.. flat-table:: struct v4l2_dbg_register
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - struct v4l2_dbg_match
+      - ``match``
+      - How to match the chip, see :c:type:`v4l2_dbg_match`.
+    * - __u32
+      - ``size``
+      - The register size in bytes.
+    * - __u64
+      - ``reg``
+      - A register number.
+    * - __u64
+      - ``val``
+      - The value read from, or to be written into the register.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _chip-match-types:
+
+.. flat-table:: Chip Match Types
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_CHIP_MATCH_BRIDGE``
+      - 0
+      - Match the nth chip on the card, zero for the bridge chip. Does not
+	match sub-devices.
+    * - ``V4L2_CHIP_MATCH_SUBDEV``
+      - 4
+      - Match the nth sub-device.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EPERM
+    Insufficient permissions. Root privileges are required to execute
+    these ioctls.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst b/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst
new file mode 100644
index 000000000000..7986a248bff9
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst
@@ -0,0 +1,226 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_DECODER_CMD:
+
+************************************************
+ioctl VIDIOC_DECODER_CMD, VIDIOC_TRY_DECODER_CMD
+************************************************
+
+Name
+====
+
+VIDIOC_DECODER_CMD - VIDIOC_TRY_DECODER_CMD - Execute an decoder command
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_DECODER_CMD, struct v4l2_decoder_cmd *argp )
+    :name: VIDIOC_DECODER_CMD
+
+
+.. c:function:: int ioctl( int fd, VIDIOC_TRY_DECODER_CMD, struct v4l2_decoder_cmd *argp )
+    :name: VIDIOC_TRY_DECODER_CMD
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    pointer to struct :c:type:`v4l2_decoder_cmd`.
+
+
+Description
+===========
+
+These ioctls control an audio/video (usually MPEG-) decoder.
+``VIDIOC_DECODER_CMD`` sends a command to the decoder,
+``VIDIOC_TRY_DECODER_CMD`` can be used to try a command without actually
+executing it. To send a command applications must initialize all fields
+of a struct :c:type:`v4l2_decoder_cmd` and call
+``VIDIOC_DECODER_CMD`` or ``VIDIOC_TRY_DECODER_CMD`` with a pointer to
+this structure.
+
+The ``cmd`` field must contain the command code. Some commands use the
+``flags`` field for additional information.
+
+A :ref:`write() <func-write>` or :ref:`VIDIOC_STREAMON`
+call sends an implicit START command to the decoder if it has not been
+started yet. Applies to both queues of mem2mem decoders.
+
+A :ref:`close() <func-close>` or :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`
+call of a streaming file descriptor sends an implicit immediate STOP
+command to the decoder, and all buffered data is discarded. Applies to both
+queues of mem2mem decoders.
+
+In principle, these ioctls are optional, not all drivers may support them. They were
+introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decoders
+(as further documented in :ref:`decoder`).
+
+
+.. tabularcolumns:: |p{1.1cm}|p{2.4cm}|p{1.2cm}|p{1.6cm}|p{10.6cm}|
+
+.. c:type:: v4l2_decoder_cmd
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_decoder_cmd
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 1 1 3
+
+    * - __u32
+      - ``cmd``
+      -
+      - The decoder command, see :ref:`decoder-cmds`.
+    * - __u32
+      - ``flags``
+      -
+      - Flags to go with the command. If no flags are defined for this
+	command, drivers and applications must set this field to zero.
+    * - union {
+      - (anonymous)
+    * - struct
+      - ``start``
+      -
+      - Structure containing additional data for the
+	``V4L2_DEC_CMD_START`` command.
+    * -
+      - __s32
+      - ``speed``
+      - Playback speed and direction. The playback speed is defined as
+	``speed``/1000 of the normal speed. So 1000 is normal playback.
+	Negative numbers denote reverse playback, so -1000 does reverse
+	playback at normal speed. Speeds -1, 0 and 1 have special
+	meanings: speed 0 is shorthand for 1000 (normal playback). A speed
+	of 1 steps just one frame forward, a speed of -1 steps just one
+	frame back.
+    * -
+      - __u32
+      - ``format``
+      - Format restrictions. This field is set by the driver, not the
+	application. Possible values are ``V4L2_DEC_START_FMT_NONE`` if
+	there are no format restrictions or ``V4L2_DEC_START_FMT_GOP`` if
+	the decoder operates on full GOPs (*Group Of Pictures*). This is
+	usually the case for reverse playback: the decoder needs full
+	GOPs, which it can then play in reverse order. So to implement
+	reverse playback the application must feed the decoder the last
+	GOP in the video file, then the GOP before that, etc. etc.
+    * - struct
+      - ``stop``
+      -
+      - Structure containing additional data for the ``V4L2_DEC_CMD_STOP``
+	command.
+    * -
+      - __u64
+      - ``pts``
+      - Stop playback at this ``pts`` or immediately if the playback is
+	already past that timestamp. Leave to 0 if you want to stop after
+	the last frame was decoded.
+    * - struct
+      - ``raw``
+    * -
+      - __u32
+      - ``data``\ [16]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+    * - }
+      -
+
+
+
+.. tabularcolumns:: |p{5.6cm}|p{0.6cm}|p{11.3cm}|
+
+.. _decoder-cmds:
+
+.. flat-table:: Decoder Commands
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 56 6 113
+
+    * - ``V4L2_DEC_CMD_START``
+      - 0
+      - Start the decoder. When the decoder is already running or paused,
+	this command will just change the playback speed. That means that
+	calling ``V4L2_DEC_CMD_START`` when the decoder was paused will
+	*not* resume the decoder. You have to explicitly call
+	``V4L2_DEC_CMD_RESUME`` for that. This command has one flag:
+	``V4L2_DEC_CMD_START_MUTE_AUDIO``. If set, then audio will be
+	muted when playing back at a non-standard speed.
+
+	For a device implementing the :ref:`decoder`, once the drain sequence
+	is initiated with the ``V4L2_DEC_CMD_STOP`` command, it must be driven
+	to completion before this command can be invoked.  Any attempt to
+	invoke the command while the drain sequence is in progress will trigger
+	an ``EBUSY`` error code.  The command may be also used to restart the
+	decoder in case of an implicit stop initiated by the decoder itself,
+	without the ``V4L2_DEC_CMD_STOP`` being called explicitly. See
+	:ref:`decoder` for more details.
+    * - ``V4L2_DEC_CMD_STOP``
+      - 1
+      - Stop the decoder. When the decoder is already stopped, this
+	command does nothing. This command has two flags: if
+	``V4L2_DEC_CMD_STOP_TO_BLACK`` is set, then the decoder will set
+	the picture to black after it stopped decoding. Otherwise the last
+	image will repeat. If
+	``V4L2_DEC_CMD_STOP_IMMEDIATELY`` is set, then the decoder stops
+	immediately (ignoring the ``pts`` value), otherwise it will keep
+	decoding until timestamp >= pts or until the last of the pending
+	data from its internal buffers was decoded.
+
+	For a device implementing the :ref:`decoder`, the command will initiate
+	the drain sequence as documented in :ref:`decoder`.  No flags or other
+	arguments are accepted in this case. Any attempt to invoke the command
+	again before the sequence completes will trigger an ``EBUSY`` error
+	code.
+    * - ``V4L2_DEC_CMD_PAUSE``
+      - 2
+      - Pause the decoder. When the decoder has not been started yet, the
+	driver will return an ``EPERM`` error code. When the decoder is
+	already paused, this command does nothing. This command has one
+	flag: if ``V4L2_DEC_CMD_PAUSE_TO_BLACK`` is set, then set the
+	decoder output to black when paused.
+    * - ``V4L2_DEC_CMD_RESUME``
+      - 3
+      - Resume decoding after a PAUSE command. When the decoder has not
+	been started yet, the driver will return an ``EPERM`` error code. When
+	the decoder is already running, this command does nothing. No
+	flags are defined for this command.
+    * - ``V4L2_DEC_CMD_FLUSH``
+      - 4
+      - Flush any held capture buffers. Only valid for stateless decoders.
+	This command is typically used when the application reached the
+	end of the stream and the last output buffer had the
+	``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag set. This would prevent
+	dequeueing the capture buffer containing the last decoded frame.
+	So this command can be used to explicitly flush that final decoded
+	frame. This command does nothing if there are no held capture buffers.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EBUSY
+    A drain sequence of a device implementing the :ref:`decoder` is still in
+    progress. It is not allowed to issue another decoder command until it
+    completes.
+
+EINVAL
+    The ``cmd`` field is invalid.
+
+EPERM
+    The application sent a PAUSE or RESUME command when the decoder was
+    not running.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst b/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst
new file mode 100644
index 000000000000..a9a176d5256d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst
@@ -0,0 +1,391 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_DQEVENT:
+
+********************
+ioctl VIDIOC_DQEVENT
+********************
+
+Name
+====
+
+VIDIOC_DQEVENT - Dequeue event
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_DQEVENT, struct v4l2_event *argp )
+    :name: VIDIOC_DQEVENT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_event`.
+
+
+Description
+===========
+
+Dequeue an event from a video device. No input is required for this
+ioctl. All the fields of the struct :c:type:`v4l2_event`
+structure are filled by the driver. The file handle will also receive
+exceptions which the application may get by e.g. using the select system
+call.
+
+
+.. tabularcolumns:: |p{3.0cm}|p{4.4cm}|p{2.4cm}|p{7.7cm}|
+
+.. c:type:: v4l2_event
+
+.. cssclass: longtable
+
+.. flat-table:: struct v4l2_event
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Type of the event, see :ref:`event-type`.
+    * - union {
+      - ``u``
+    * - struct :c:type:`v4l2_event_vsync`
+      - ``vsync``
+      - Event data for event ``V4L2_EVENT_VSYNC``.
+    * - struct :c:type:`v4l2_event_ctrl`
+      - ``ctrl``
+      - Event data for event ``V4L2_EVENT_CTRL``.
+    * - struct :c:type:`v4l2_event_frame_sync`
+      - ``frame_sync``
+      - Event data for event ``V4L2_EVENT_FRAME_SYNC``.
+    * - struct :c:type:`v4l2_event_motion_det`
+      - ``motion_det``
+      - Event data for event V4L2_EVENT_MOTION_DET.
+    * - struct :c:type:`v4l2_event_src_change`
+      - ``src_change``
+      - Event data for event V4L2_EVENT_SOURCE_CHANGE.
+    * - __u8
+      - ``data``\ [64]
+      - Event data. Defined by the event type. The union should be used to
+	define easily accessible type for events.
+    * - }
+      -
+    * - __u32
+      - ``pending``
+      - Number of pending events excluding this one.
+    * - __u32
+      - ``sequence``
+      - Event sequence number. The sequence number is incremented for
+	every subscribed event that takes place. If sequence numbers are
+	not contiguous it means that events have been lost.
+    * - struct timespec
+      - ``timestamp``
+      - Event timestamp. The timestamp has been taken from the
+	``CLOCK_MONOTONIC`` clock. To access the same clock outside V4L2,
+	use :c:func:`clock_gettime`.
+    * - u32
+      - ``id``
+      - The ID associated with the event source. If the event does not
+	have an associated ID (this depends on the event type), then this
+	is 0.
+    * - __u32
+      - ``reserved``\ [8]
+      - Reserved for future extensions. Drivers must set the array to
+	zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. cssclass:: longtable
+
+.. _event-type:
+
+.. flat-table:: Event Types
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_EVENT_ALL``
+      - 0
+      - All events. V4L2_EVENT_ALL is valid only for
+	VIDIOC_UNSUBSCRIBE_EVENT for unsubscribing all events at once.
+    * - ``V4L2_EVENT_VSYNC``
+      - 1
+      - This event is triggered on the vertical sync. This event has a
+	struct :c:type:`v4l2_event_vsync` associated
+	with it.
+    * - ``V4L2_EVENT_EOS``
+      - 2
+      - This event is triggered when the end of a stream is reached. This
+	is typically used with MPEG decoders to report to the application
+	when the last of the MPEG stream has been decoded.
+    * - ``V4L2_EVENT_CTRL``
+      - 3
+      - This event requires that the ``id`` matches the control ID from
+	which you want to receive events. This event is triggered if the
+	control's value changes, if a button control is pressed or if the
+	control's flags change. This event has a struct
+	:c:type:`v4l2_event_ctrl` associated with it.
+	This struct contains much of the same information as struct
+	:ref:`v4l2_queryctrl <v4l2-queryctrl>` and struct
+	:c:type:`v4l2_control`.
+
+	If the event is generated due to a call to
+	:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` or
+	:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, then the
+	event will *not* be sent to the file handle that called the ioctl
+	function. This prevents nasty feedback loops. If you *do* want to
+	get the event, then set the ``V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK``
+	flag.
+
+	This event type will ensure that no information is lost when more
+	events are raised than there is room internally. In that case the
+	struct :c:type:`v4l2_event_ctrl` of the
+	second-oldest event is kept, but the ``changes`` field of the
+	second-oldest event is ORed with the ``changes`` field of the
+	oldest event.
+    * - ``V4L2_EVENT_FRAME_SYNC``
+      - 4
+      - Triggered immediately when the reception of a frame has begun.
+	This event has a struct
+	:c:type:`v4l2_event_frame_sync`
+	associated with it.
+
+	If the hardware needs to be stopped in the case of a buffer
+	underrun it might not be able to generate this event. In such
+	cases the ``frame_sequence`` field in struct
+	:c:type:`v4l2_event_frame_sync` will not
+	be incremented. This causes two consecutive frame sequence numbers
+	to have n times frame interval in between them.
+    * - ``V4L2_EVENT_SOURCE_CHANGE``
+      - 5
+      - This event is triggered when a source parameter change is detected
+	during runtime by the video device. It can be a runtime resolution
+	change triggered by a video decoder or the format change happening
+	on an input connector. This event requires that the ``id`` matches
+	the input index (when used with a video device node) or the pad
+	index (when used with a subdevice node) from which you want to
+	receive events.
+
+	This event has a struct
+	:c:type:`v4l2_event_src_change`
+	associated with it. The ``changes`` bitfield denotes what has
+	changed for the subscribed pad. If multiple events occurred before
+	application could dequeue them, then the changes will have the
+	ORed value of all the events generated.
+    * - ``V4L2_EVENT_MOTION_DET``
+      - 6
+      - Triggered whenever the motion detection state for one or more of
+	the regions changes. This event has a struct
+	:c:type:`v4l2_event_motion_det`
+	associated with it.
+    * - ``V4L2_EVENT_PRIVATE_START``
+      - 0x08000000
+      - Base event number for driver-private events.
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_event_vsync
+
+.. flat-table:: struct v4l2_event_vsync
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``field``
+      - The upcoming field. See enum :c:type:`v4l2_field`.
+
+
+
+.. tabularcolumns:: |p{3.5cm}|p{3.0cm}|p{1.8cm}|p{8.5cm}|
+
+.. c:type:: v4l2_event_ctrl
+
+.. flat-table:: struct v4l2_event_ctrl
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``changes``
+      - A bitmask that tells what has changed. See
+	:ref:`ctrl-changes-flags`.
+    * - __u32
+      - ``type``
+      - The type of the control. See enum
+	:c:type:`v4l2_ctrl_type`.
+    * - union {
+      - (anonymous)
+    * - __s32
+      - ``value``
+      - The 32-bit value of the control for 32-bit control types. This is
+	0 for string controls since the value of a string cannot be passed
+	using :ref:`VIDIOC_DQEVENT`.
+    * - __s64
+      - ``value64``
+      - The 64-bit value of the control for 64-bit control types.
+    * - }
+      -
+    * - __u32
+      - ``flags``
+      - The control flags. See :ref:`control-flags`.
+    * - __s32
+      - ``minimum``
+      - The minimum value of the control. See struct
+	:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
+    * - __s32
+      - ``maximum``
+      - The maximum value of the control. See struct
+	:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
+    * - __s32
+      - ``step``
+      - The step value of the control. See struct
+	:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
+    * - __s32
+      - ``default_value``
+      - The default value value of the control. See struct
+	:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_event_frame_sync
+
+.. flat-table:: struct v4l2_event_frame_sync
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``frame_sequence``
+      - The sequence number of the frame being received.
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_event_src_change
+
+.. flat-table:: struct v4l2_event_src_change
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``changes``
+      - A bitmask that tells what has changed. See
+	:ref:`src-changes-flags`.
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_event_motion_det
+
+.. flat-table:: struct v4l2_event_motion_det
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``flags``
+      - Currently only one flag is available: if
+	``V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ`` is set, then the
+	``frame_sequence`` field is valid, otherwise that field should be
+	ignored.
+    * - __u32
+      - ``frame_sequence``
+      - The sequence number of the frame being received. Only valid if the
+	``V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ`` flag was set.
+    * - __u32
+      - ``region_mask``
+      - The bitmask of the regions that reported motion. There is at least
+	one region. If this field is 0, then no motion was detected at
+	all. If there is no ``V4L2_CID_DETECT_MD_REGION_GRID`` control
+	(see :ref:`detect-controls`) to assign a different region to
+	each cell in the motion detection grid, then that all cells are
+	automatically assigned to the default region 0.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _ctrl-changes-flags:
+
+.. flat-table:: Control Changes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_EVENT_CTRL_CH_VALUE``
+      - 0x0001
+      - This control event was triggered because the value of the control
+	changed. Special cases: Volatile controls do no generate this
+	event; If a control has the ``V4L2_CTRL_FLAG_EXECUTE_ON_WRITE``
+	flag set, then this event is sent as well, regardless its value.
+    * - ``V4L2_EVENT_CTRL_CH_FLAGS``
+      - 0x0002
+      - This control event was triggered because the control flags
+	changed.
+    * - ``V4L2_EVENT_CTRL_CH_RANGE``
+      - 0x0004
+      - This control event was triggered because the minimum, maximum,
+	step or the default value of the control changed.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _src-changes-flags:
+
+.. flat-table:: Source Changes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_EVENT_SRC_CH_RESOLUTION``
+      - 0x0001
+      - This event gets triggered when a resolution change is detected at
+	an input. This can come from an input connector or from a video
+	decoder. Applications will have to query the new resolution (if
+	any, the signal may also have been lost).
+
+	For stateful decoders follow the guidelines in :ref:`decoder`.
+	Video Capture devices have to query the new timings using
+	:ref:`VIDIOC_QUERY_DV_TIMINGS` or
+	:ref:`VIDIOC_QUERYSTD <VIDIOC_QUERYSTD>`.
+
+	*Important*: even if the new video timings appear identical to the old
+	ones, receiving this event indicates that there was an issue with the
+	video signal and you must stop and restart streaming
+	(:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`
+	followed by :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`). The reason is
+	that many Video Capture devices are not able to recover from a temporary
+	loss of signal and so restarting streaming I/O is required in order for
+	the hardware to synchronize to the video signal.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst
new file mode 100644
index 000000000000..60730c32bfe4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst
@@ -0,0 +1,169 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_DV_TIMINGS_CAP:
+
+*********************************************************
+ioctl VIDIOC_DV_TIMINGS_CAP, VIDIOC_SUBDEV_DV_TIMINGS_CAP
+*********************************************************
+
+Name
+====
+
+VIDIOC_DV_TIMINGS_CAP - VIDIOC_SUBDEV_DV_TIMINGS_CAP - The capabilities of the Digital Video receiver/transmitter
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_DV_TIMINGS_CAP, struct v4l2_dv_timings_cap *argp )
+    :name: VIDIOC_DV_TIMINGS_CAP
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_DV_TIMINGS_CAP, struct v4l2_dv_timings_cap *argp )
+    :name: VIDIOC_SUBDEV_DV_TIMINGS_CAP
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_dv_timings_cap`.
+
+
+Description
+===========
+
+To query the capabilities of the DV receiver/transmitter applications
+initialize the ``pad`` field to 0, zero the reserved array of struct
+:c:type:`v4l2_dv_timings_cap` and call the
+``VIDIOC_DV_TIMINGS_CAP`` ioctl on a video node and the driver will fill
+in the structure.
+
+.. note::
+
+   Drivers may return different values after
+   switching the video input or output.
+
+When implemented by the driver DV capabilities of subdevices can be
+queried by calling the ``VIDIOC_SUBDEV_DV_TIMINGS_CAP`` ioctl directly
+on a subdevice node. The capabilities are specific to inputs (for DV
+receivers) or outputs (for DV transmitters), applications must specify
+the desired pad number in the struct
+:c:type:`v4l2_dv_timings_cap` ``pad`` field and
+zero the ``reserved`` array. Attempts to query capabilities on a pad
+that doesn't support them will return an ``EINVAL`` error code.
+
+
+.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}|
+
+.. c:type:: v4l2_bt_timings_cap
+
+.. flat-table:: struct v4l2_bt_timings_cap
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``min_width``
+      - Minimum width of the active video in pixels.
+    * - __u32
+      - ``max_width``
+      - Maximum width of the active video in pixels.
+    * - __u32
+      - ``min_height``
+      - Minimum height of the active video in lines.
+    * - __u32
+      - ``max_height``
+      - Maximum height of the active video in lines.
+    * - __u64
+      - ``min_pixelclock``
+      - Minimum pixelclock frequency in Hz.
+    * - __u64
+      - ``max_pixelclock``
+      - Maximum pixelclock frequency in Hz.
+    * - __u32
+      - ``standards``
+      - The video standard(s) supported by the hardware. See
+	:ref:`dv-bt-standards` for a list of standards.
+    * - __u32
+      - ``capabilities``
+      - Several flags giving more information about the capabilities. See
+	:ref:`dv-bt-cap-capabilities` for a description of the flags.
+    * - __u32
+      - ``reserved``\ [16]
+      - Reserved for future extensions.
+	Drivers must set the array to zero.
+
+
+
+.. tabularcolumns:: |p{1.0cm}|p{4.0cm}|p{3.5cm}|p{9.2cm}|
+
+.. c:type:: v4l2_dv_timings_cap
+
+.. flat-table:: struct v4l2_dv_timings_cap
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Type of DV timings as listed in :ref:`dv-timing-types`.
+    * - __u32
+      - ``pad``
+      - Pad number as reported by the media controller API. This field is
+	only used when operating on a subdevice node. When operating on a
+	video node applications must set this field to zero.
+    * - __u32
+      - ``reserved``\ [2]
+      - Reserved for future extensions.
+
+	Drivers and applications must set the array to zero.
+    * - union {
+      - (anonymous)
+    * - struct :c:type:`v4l2_bt_timings_cap`
+      - ``bt``
+      - BT.656/1120 timings capabilities of the hardware.
+    * - __u32
+      - ``raw_data``\ [32]
+    * - }
+      -
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. _dv-bt-cap-capabilities:
+
+.. flat-table:: DV BT Timing capabilities
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Flag
+      - Description
+    * -
+      -
+    * - ``V4L2_DV_BT_CAP_INTERLACED``
+      - Interlaced formats are supported.
+    * - ``V4L2_DV_BT_CAP_PROGRESSIVE``
+      - Progressive formats are supported.
+    * - ``V4L2_DV_BT_CAP_REDUCED_BLANKING``
+      - CVT/GTF specific: the timings can make use of reduced blanking
+	(CVT) or the 'Secondary GTF' curve (GTF).
+    * - ``V4L2_DV_BT_CAP_CUSTOM``
+      - Can support non-standard timings, i.e. timings not belonging to
+	the standards set in the ``standards`` field.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst b/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst
new file mode 100644
index 000000000000..16269b3b1715
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst
@@ -0,0 +1,168 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENCODER_CMD:
+
+************************************************
+ioctl VIDIOC_ENCODER_CMD, VIDIOC_TRY_ENCODER_CMD
+************************************************
+
+Name
+====
+
+VIDIOC_ENCODER_CMD - VIDIOC_TRY_ENCODER_CMD - Execute an encoder command
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENCODER_CMD, struct v4l2_encoder_cmd *argp )
+    :name: VIDIOC_ENCODER_CMD
+
+.. c:function:: int ioctl( int fd, VIDIOC_TRY_ENCODER_CMD, struct v4l2_encoder_cmd *argp )
+    :name: VIDIOC_TRY_ENCODER_CMD
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_encoder_cmd`.
+
+Description
+===========
+
+These ioctls control an audio/video (usually MPEG-) encoder.
+``VIDIOC_ENCODER_CMD`` sends a command to the encoder,
+``VIDIOC_TRY_ENCODER_CMD`` can be used to try a command without actually
+executing it.
+
+To send a command applications must initialize all fields of a struct
+:c:type:`v4l2_encoder_cmd` and call
+``VIDIOC_ENCODER_CMD`` or ``VIDIOC_TRY_ENCODER_CMD`` with a pointer to
+this structure.
+
+The ``cmd`` field must contain the command code. The ``flags`` field is
+currently only used by the STOP command and contains one bit: If the
+``V4L2_ENC_CMD_STOP_AT_GOP_END`` flag is set, encoding will continue
+until the end of the current *Group Of Pictures*, otherwise it will stop
+immediately.
+
+A :ref:`read() <func-read>` or :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`
+call sends an implicit START command to the encoder if it has not been
+started yet. After a STOP command, :ref:`read() <func-read>` calls will read
+the remaining data buffered by the driver. When the buffer is empty,
+:ref:`read() <func-read>` will return zero and the next :ref:`read() <func-read>`
+call will restart the encoder.
+
+A :ref:`close() <func-close>` or :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`
+call of a streaming file descriptor sends an implicit immediate STOP to
+the encoder, and all buffered data is discarded.
+
+These ioctls are optional, not all drivers may support them. They were
+introduced in Linux 2.6.21.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_encoder_cmd
+
+.. flat-table:: struct v4l2_encoder_cmd
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``cmd``
+      - The encoder command, see :ref:`encoder-cmds`.
+    * - __u32
+      - ``flags``
+      - Flags to go with the command, see :ref:`encoder-flags`. If no
+	flags are defined for this command, drivers and applications must
+	set this field to zero.
+    * - __u32
+      - ``data``\ [8]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _encoder-cmds:
+
+.. flat-table:: Encoder Commands
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_ENC_CMD_START``
+      - 0
+      - Start the encoder. When the encoder is already running or paused,
+	this command does nothing. No flags are defined for this command.
+    * - ``V4L2_ENC_CMD_STOP``
+      - 1
+      - Stop the encoder. When the ``V4L2_ENC_CMD_STOP_AT_GOP_END`` flag
+	is set, encoding will continue until the end of the current *Group
+	Of Pictures*, otherwise encoding will stop immediately. When the
+	encoder is already stopped, this command does nothing. mem2mem
+	encoders will send a ``V4L2_EVENT_EOS`` event when the last frame
+	has been encoded and all frames are ready to be dequeued and will
+	set the ``V4L2_BUF_FLAG_LAST`` buffer flag on the last buffer of
+	the capture queue to indicate there will be no new buffers
+	produced to dequeue. This buffer may be empty, indicated by the
+	driver setting the ``bytesused`` field to 0. Once the
+	``V4L2_BUF_FLAG_LAST`` flag was set, the
+	:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will not block anymore,
+	but return an ``EPIPE`` error code.
+    * - ``V4L2_ENC_CMD_PAUSE``
+      - 2
+      - Pause the encoder. When the encoder has not been started yet, the
+	driver will return an ``EPERM`` error code. When the encoder is
+	already paused, this command does nothing. No flags are defined
+	for this command.
+    * - ``V4L2_ENC_CMD_RESUME``
+      - 3
+      - Resume encoding after a PAUSE command. When the encoder has not
+	been started yet, the driver will return an ``EPERM`` error code. When
+	the encoder is already running, this command does nothing. No
+	flags are defined for this command.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _encoder-flags:
+
+.. flat-table:: Encoder Command Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_ENC_CMD_STOP_AT_GOP_END``
+      - 0x0001
+      - Stop encoding at the end of the current *Group Of Pictures*,
+	rather than immediately.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The ``cmd`` field is invalid.
+
+EPERM
+    The application sent a PAUSE or RESUME command when the encoder was
+    not running.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst
new file mode 100644
index 000000000000..89d6b860193a
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst
@@ -0,0 +1,114 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUM_DV_TIMINGS:
+
+***********************************************************
+ioctl VIDIOC_ENUM_DV_TIMINGS, VIDIOC_SUBDEV_ENUM_DV_TIMINGS
+***********************************************************
+
+Name
+====
+
+VIDIOC_ENUM_DV_TIMINGS - VIDIOC_SUBDEV_ENUM_DV_TIMINGS - Enumerate supported Digital Video timings
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUM_DV_TIMINGS, struct v4l2_enum_dv_timings *argp )
+    :name: VIDIOC_ENUM_DV_TIMINGS
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_DV_TIMINGS, struct v4l2_enum_dv_timings *argp )
+    :name: VIDIOC_SUBDEV_ENUM_DV_TIMINGS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_enum_dv_timings`.
+
+
+Description
+===========
+
+While some DV receivers or transmitters support a wide range of timings,
+others support only a limited number of timings. With this ioctl
+applications can enumerate a list of known supported timings. Call
+:ref:`VIDIOC_DV_TIMINGS_CAP` to check if it
+also supports other standards or even custom timings that are not in
+this list.
+
+To query the available timings, applications initialize the ``index``
+field, set the ``pad`` field to 0, zero the reserved array of struct
+:c:type:`v4l2_enum_dv_timings` and call the
+``VIDIOC_ENUM_DV_TIMINGS`` ioctl on a video node with a pointer to this
+structure. Drivers fill the rest of the structure or return an ``EINVAL``
+error code when the index is out of bounds. To enumerate all supported
+DV timings, applications shall begin at index zero, incrementing by one
+until the driver returns ``EINVAL``.
+
+.. note::
+
+   Drivers may enumerate a different set of DV timings after
+   switching the video input or output.
+
+When implemented by the driver DV timings of subdevices can be queried
+by calling the ``VIDIOC_SUBDEV_ENUM_DV_TIMINGS`` ioctl directly on a
+subdevice node. The DV timings are specific to inputs (for DV receivers)
+or outputs (for DV transmitters), applications must specify the desired
+pad number in the struct
+:c:type:`v4l2_enum_dv_timings` ``pad`` field.
+Attempts to enumerate timings on a pad that doesn't support them will
+return an ``EINVAL`` error code.
+
+
+.. c:type:: v4l2_enum_dv_timings
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_enum_dv_timings
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - Number of the DV timings, set by the application.
+    * - __u32
+      - ``pad``
+      - Pad number as reported by the media controller API. This field is
+	only used when operating on a subdevice node. When operating on a
+	video node applications must set this field to zero.
+    * - __u32
+      - ``reserved``\ [2]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+    * - struct :c:type:`v4l2_dv_timings`
+      - ``timings``
+      - The timings.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_enum_dv_timings`
+    ``index`` is out of bounds or the ``pad`` number is invalid.
+
+ENODATA
+    Digital video presets are not supported for this input or output.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst
new file mode 100644
index 000000000000..7e3142e11d77
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst
@@ -0,0 +1,159 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUM_FMT:
+
+*********************
+ioctl VIDIOC_ENUM_FMT
+*********************
+
+Name
+====
+
+VIDIOC_ENUM_FMT - Enumerate image formats
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FMT, struct v4l2_fmtdesc *argp )
+    :name: VIDIOC_ENUM_FMT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_fmtdesc`.
+
+
+Description
+===========
+
+To enumerate image formats applications initialize the ``type`` and
+``index`` field of struct :c:type:`v4l2_fmtdesc` and call
+the :ref:`VIDIOC_ENUM_FMT` ioctl with a pointer to this structure. Drivers
+fill the rest of the structure or return an ``EINVAL`` error code. All
+formats are enumerable by beginning at index zero and incrementing by
+one until ``EINVAL`` is returned. If applicable, drivers shall return
+formats in preference order, where preferred formats are returned before
+(that is, with lower ``index`` value) less-preferred formats.
+
+.. note::
+
+   After switching input or output the list of enumerated image
+   formats may be different.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_fmtdesc
+
+.. flat-table:: struct v4l2_fmtdesc
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - Number of the format in the enumeration, set by the application.
+	This is in no way related to the ``pixelformat`` field.
+    * - __u32
+      - ``type``
+      - Type of the data stream, set by the application. Only these types
+	are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``,
+	``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
+	``V4L2_BUF_TYPE_VIDEO_OUTPUT``,
+	``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``,
+	``V4L2_BUF_TYPE_VIDEO_OVERLAY``,
+	``V4L2_BUF_TYPE_SDR_CAPTURE``,
+	``V4L2_BUF_TYPE_SDR_OUTPUT`` and
+	``V4L2_BUF_TYPE_META_CAPTURE``.
+	See :c:type:`v4l2_buf_type`.
+    * - __u32
+      - ``flags``
+      - See :ref:`fmtdesc-flags`
+    * - __u8
+      - ``description``\ [32]
+      - Description of the format, a NUL-terminated ASCII string. This
+	information is intended for the user, for example: "YUV 4:2:2".
+    * - __u32
+      - ``pixelformat``
+      - The image format identifier. This is a four character code as
+	computed by the v4l2_fourcc() macro:
+    * - :cspan:`2`
+
+	.. _v4l2-fourcc:
+
+	``#define v4l2_fourcc(a,b,c,d)``
+
+	``(((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))``
+
+	Several image formats are already defined by this specification in
+	:ref:`pixfmt`.
+
+	.. attention::
+
+	   These codes are not the same as those used
+	   in the Windows world.
+    * - __u32
+      - ``reserved``\ [4]
+      - Reserved for future extensions. Drivers must set the array to
+	zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _fmtdesc-flags:
+
+.. flat-table:: Image Format Description Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_FMT_FLAG_COMPRESSED``
+      - 0x0001
+      - This is a compressed format.
+    * - ``V4L2_FMT_FLAG_EMULATED``
+      - 0x0002
+      - This format is not native to the device but emulated through
+	software (usually libv4l2), where possible try to use a native
+	format instead for better performance.
+    * - ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
+      - 0x0004
+      - The hardware decoder for this compressed bytestream format (aka coded
+	format) is capable of parsing a continuous bytestream. Applications do
+	not need to parse the bytestream themselves to find the boundaries
+	between frames/fields. This flag can only be used in combination with
+	the ``V4L2_FMT_FLAG_COMPRESSED`` flag, since this applies to compressed
+	formats only. This flag is valid for stateful decoders only.
+    * - ``V4L2_FMT_FLAG_DYN_RESOLUTION``
+      - 0x0008
+      - Dynamic resolution switching is supported by the device for this
+	compressed bytestream format (aka coded format). It will notify the user
+	via the event ``V4L2_EVENT_SOURCE_CHANGE`` when changes in the video
+	parameters are detected. This flag can only be used in combination
+	with the ``V4L2_FMT_FLAG_COMPRESSED`` flag, since this applies to
+	compressed formats only. It is also only applies to stateful codecs.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_fmtdesc` ``type`` is not
+    supported or the ``index`` is out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst
new file mode 100644
index 000000000000..0e3db737371f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst
@@ -0,0 +1,203 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUM_FRAMEINTERVALS:
+
+********************************
+ioctl VIDIOC_ENUM_FRAMEINTERVALS
+********************************
+
+Name
+====
+
+VIDIOC_ENUM_FRAMEINTERVALS - Enumerate frame intervals
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FRAMEINTERVALS, struct v4l2_frmivalenum *argp )
+    :name: VIDIOC_ENUM_FRAMEINTERVALS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_frmivalenum`
+    that contains a pixel format and size and receives a frame interval.
+
+
+Description
+===========
+
+This ioctl allows applications to enumerate all frame intervals that the
+device supports for the given pixel format and frame size.
+
+The supported pixel formats and frame sizes can be obtained by using the
+:ref:`VIDIOC_ENUM_FMT` and
+:ref:`VIDIOC_ENUM_FRAMESIZES` functions.
+
+The return value and the content of the ``v4l2_frmivalenum.type`` field
+depend on the type of frame intervals the device supports. Here are the
+semantics of the function for the different cases:
+
+-  **Discrete:** The function returns success if the given index value
+   (zero-based) is valid. The application should increase the index by
+   one for each call until ``EINVAL`` is returned. The
+   `v4l2_frmivalenum.type` field is set to
+   `V4L2_FRMIVAL_TYPE_DISCRETE` by the driver. Of the union only
+   the `discrete` member is valid.
+
+-  **Step-wise:** The function returns success if the given index value
+   is zero and ``EINVAL`` for any other index value. The
+   ``v4l2_frmivalenum.type`` field is set to
+   ``V4L2_FRMIVAL_TYPE_STEPWISE`` by the driver. Of the union only the
+   ``stepwise`` member is valid.
+
+-  **Continuous:** This is a special case of the step-wise type above.
+   The function returns success if the given index value is zero and
+   ``EINVAL`` for any other index value. The ``v4l2_frmivalenum.type``
+   field is set to ``V4L2_FRMIVAL_TYPE_CONTINUOUS`` by the driver. Of
+   the union only the ``stepwise`` member is valid and the ``step``
+   value is set to 1.
+
+When the application calls the function with index zero, it must check
+the ``type`` field to determine the type of frame interval enumeration
+the device supports. Only for the ``V4L2_FRMIVAL_TYPE_DISCRETE`` type
+does it make sense to increase the index value to receive more frame
+intervals.
+
+.. note::
+
+   The order in which the frame intervals are returned has no
+   special meaning. In particular does it not say anything about potential
+   default frame intervals.
+
+Applications can assume that the enumeration data does not change
+without any interaction from the application itself. This means that the
+enumeration data is consistent if the application does not perform any
+other ioctl calls while it runs the frame interval enumeration.
+
+.. note::
+
+   **Frame intervals and frame rates:** The V4L2 API uses frame
+   intervals instead of frame rates. Given the frame interval the frame
+   rate can be computed as follows:
+
+   ::
+
+       frame_rate = 1 / frame_interval
+
+
+Structs
+=======
+
+In the structs below, *IN* denotes a value that has to be filled in by
+the application, *OUT* denotes values that the driver fills in. The
+application should zero out all members except for the *IN* fields.
+
+
+.. c:type:: v4l2_frmival_stepwise
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_frmival_stepwise
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - struct :c:type:`v4l2_fract`
+      - ``min``
+      - Minimum frame interval [s].
+    * - struct :c:type:`v4l2_fract`
+      - ``max``
+      - Maximum frame interval [s].
+    * - struct :c:type:`v4l2_fract`
+      - ``step``
+      - Frame interval step size [s].
+
+
+
+.. c:type:: v4l2_frmivalenum
+
+.. tabularcolumns:: |p{1.8cm}|p{4.4cm}|p{2.4cm}|p{8.9cm}|
+
+.. flat-table:: struct v4l2_frmivalenum
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - __u32
+      - ``index``
+      - IN: Index of the given frame interval in the enumeration.
+    * - __u32
+      - ``pixel_format``
+      - IN: Pixel format for which the frame intervals are enumerated.
+    * - __u32
+      - ``width``
+      - IN: Frame width for which the frame intervals are enumerated.
+    * - __u32
+      - ``height``
+      - IN: Frame height for which the frame intervals are enumerated.
+    * - __u32
+      - ``type``
+      - OUT: Frame interval type the device supports.
+    * - union {
+      - (anonymous)
+      - OUT: Frame interval with the given index.
+    * - struct :c:type:`v4l2_fract`
+      - ``discrete``
+      - Frame interval [s].
+    * - struct :c:type:`v4l2_frmival_stepwise`
+      - ``stepwise``
+      -
+    * - }
+      -
+      -
+    * - __u32
+      - ``reserved[2]``
+      -
+      - Reserved space for future use. Must be zeroed by drivers and
+	applications.
+
+
+
+Enums
+=====
+
+
+.. c:type:: v4l2_frmivaltypes
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. flat-table:: enum v4l2_frmivaltypes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_FRMIVAL_TYPE_DISCRETE``
+      - 1
+      - Discrete frame interval.
+    * - ``V4L2_FRMIVAL_TYPE_CONTINUOUS``
+      - 2
+      - Continuous frame interval.
+    * - ``V4L2_FRMIVAL_TYPE_STEPWISE``
+      - 3
+      - Step-wise defined frame interval.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst
new file mode 100644
index 000000000000..1934d7da9743
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst
@@ -0,0 +1,213 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUM_FRAMESIZES:
+
+****************************
+ioctl VIDIOC_ENUM_FRAMESIZES
+****************************
+
+Name
+====
+
+VIDIOC_ENUM_FRAMESIZES - Enumerate frame sizes
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FRAMESIZES, struct v4l2_frmsizeenum *argp )
+    :name: VIDIOC_ENUM_FRAMESIZES
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_frmsizeenum`
+    that contains an index and pixel format and receives a frame width
+    and height.
+
+
+Description
+===========
+
+This ioctl allows applications to enumerate all frame sizes (i. e. width
+and height in pixels) that the device supports for the given pixel
+format.
+
+The supported pixel formats can be obtained by using the
+:ref:`VIDIOC_ENUM_FMT` function.
+
+The return value and the content of the ``v4l2_frmsizeenum.type`` field
+depend on the type of frame sizes the device supports. Here are the
+semantics of the function for the different cases:
+
+-  **Discrete:** The function returns success if the given index value
+   (zero-based) is valid. The application should increase the index by
+   one for each call until ``EINVAL`` is returned. The
+   ``v4l2_frmsizeenum.type`` field is set to
+   ``V4L2_FRMSIZE_TYPE_DISCRETE`` by the driver. Of the union only the
+   ``discrete`` member is valid.
+
+-  **Step-wise:** The function returns success if the given index value
+   is zero and ``EINVAL`` for any other index value. The
+   ``v4l2_frmsizeenum.type`` field is set to
+   ``V4L2_FRMSIZE_TYPE_STEPWISE`` by the driver. Of the union only the
+   ``stepwise`` member is valid.
+
+-  **Continuous:** This is a special case of the step-wise type above.
+   The function returns success if the given index value is zero and
+   ``EINVAL`` for any other index value. The ``v4l2_frmsizeenum.type``
+   field is set to ``V4L2_FRMSIZE_TYPE_CONTINUOUS`` by the driver. Of
+   the union only the ``stepwise`` member is valid and the
+   ``step_width`` and ``step_height`` values are set to 1.
+
+When the application calls the function with index zero, it must check
+the ``type`` field to determine the type of frame size enumeration the
+device supports. Only for the ``V4L2_FRMSIZE_TYPE_DISCRETE`` type does
+it make sense to increase the index value to receive more frame sizes.
+
+.. note::
+
+   The order in which the frame sizes are returned has no special
+   meaning. In particular does it not say anything about potential default
+   format sizes.
+
+Applications can assume that the enumeration data does not change
+without any interaction from the application itself. This means that the
+enumeration data is consistent if the application does not perform any
+other ioctl calls while it runs the frame size enumeration.
+
+
+Structs
+=======
+
+In the structs below, *IN* denotes a value that has to be filled in by
+the application, *OUT* denotes values that the driver fills in. The
+application should zero out all members except for the *IN* fields.
+
+
+.. c:type:: v4l2_frmsize_discrete
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_frmsize_discrete
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``width``
+      - Width of the frame [pixel].
+    * - __u32
+      - ``height``
+      - Height of the frame [pixel].
+
+
+
+.. c:type:: v4l2_frmsize_stepwise
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_frmsize_stepwise
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``min_width``
+      - Minimum frame width [pixel].
+    * - __u32
+      - ``max_width``
+      - Maximum frame width [pixel].
+    * - __u32
+      - ``step_width``
+      - Frame width step size [pixel].
+    * - __u32
+      - ``min_height``
+      - Minimum frame height [pixel].
+    * - __u32
+      - ``max_height``
+      - Maximum frame height [pixel].
+    * - __u32
+      - ``step_height``
+      - Frame height step size [pixel].
+
+
+
+.. c:type:: v4l2_frmsizeenum
+
+.. tabularcolumns:: |p{1.4cm}|p{5.9cm}|p{2.3cm}|p{8.0cm}|
+
+.. flat-table:: struct v4l2_frmsizeenum
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - __u32
+      - ``index``
+      - IN: Index of the given frame size in the enumeration.
+    * - __u32
+      - ``pixel_format``
+      - IN: Pixel format for which the frame sizes are enumerated.
+    * - __u32
+      - ``type``
+      - OUT: Frame size type the device supports.
+    * - union {
+      - (anonymous)
+      - OUT: Frame size with the given index.
+    * - struct :c:type:`v4l2_frmsize_discrete`
+      - ``discrete``
+      -
+    * - struct :c:type:`v4l2_frmsize_stepwise`
+      - ``stepwise``
+      -
+    * - }
+      -
+      -
+    * - __u32
+      - ``reserved[2]``
+      - Reserved space for future use. Must be zeroed by drivers and
+	applications.
+
+
+
+Enums
+=====
+
+
+.. c:type:: v4l2_frmsizetypes
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. flat-table:: enum v4l2_frmsizetypes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_FRMSIZE_TYPE_DISCRETE``
+      - 1
+      - Discrete frame size.
+    * - ``V4L2_FRMSIZE_TYPE_CONTINUOUS``
+      - 2
+      - Continuous frame size.
+    * - ``V4L2_FRMSIZE_TYPE_STEPWISE``
+      - 3
+      - Step-wise defined frame size.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst
new file mode 100644
index 000000000000..ee3ba67601fa
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst
@@ -0,0 +1,150 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUM_FREQ_BANDS:
+
+****************************
+ioctl VIDIOC_ENUM_FREQ_BANDS
+****************************
+
+Name
+====
+
+VIDIOC_ENUM_FREQ_BANDS - Enumerate supported frequency bands
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUM_FREQ_BANDS, struct v4l2_frequency_band *argp )
+    :name: VIDIOC_ENUM_FREQ_BANDS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_frequency_band`.
+
+
+Description
+===========
+
+Enumerates the frequency bands that a tuner or modulator supports. To do
+this applications initialize the ``tuner``, ``type`` and ``index``
+fields, and zero out the ``reserved`` array of a struct
+:c:type:`v4l2_frequency_band` and call the
+:ref:`VIDIOC_ENUM_FREQ_BANDS` ioctl with a pointer to this structure.
+
+This ioctl is supported if the ``V4L2_TUNER_CAP_FREQ_BANDS`` capability
+of the corresponding tuner/modulator is set.
+
+
+.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}|
+
+.. c:type:: v4l2_frequency_band
+
+.. flat-table:: struct v4l2_frequency_band
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2 1 1
+
+    * - __u32
+      - ``tuner``
+      - The tuner or modulator index number. This is the same value as in
+	the struct :c:type:`v4l2_input` ``tuner`` field and
+	the struct :c:type:`v4l2_tuner` ``index`` field, or
+	the struct :c:type:`v4l2_output` ``modulator`` field
+	and the struct :c:type:`v4l2_modulator` ``index``
+	field.
+    * - __u32
+      - ``type``
+      - The tuner type. This is the same value as in the struct
+	:c:type:`v4l2_tuner` ``type`` field. The type must be
+	set to ``V4L2_TUNER_RADIO`` for ``/dev/radioX`` device nodes, and
+	to ``V4L2_TUNER_ANALOG_TV`` for all others. Set this field to
+	``V4L2_TUNER_RADIO`` for modulators (currently only radio
+	modulators are supported). See :c:type:`v4l2_tuner_type`
+    * - __u32
+      - ``index``
+      - Identifies the frequency band, set by the application.
+    * - __u32
+      - ``capability``
+      - :cspan:`2` The tuner/modulator capability flags for this
+	frequency band, see :ref:`tuner-capability`. The
+	``V4L2_TUNER_CAP_LOW`` or ``V4L2_TUNER_CAP_1HZ`` capability must
+	be the same for all frequency bands of the selected
+	tuner/modulator. So either all bands have that capability set, or
+	none of them have that capability.
+    * - __u32
+      - ``rangelow``
+      - :cspan:`2` The lowest tunable frequency in units of 62.5 kHz, or
+	if the ``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units
+	of 62.5 Hz, for this frequency band. A 1 Hz unit is used when the
+	``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is set.
+    * - __u32
+      - ``rangehigh``
+      - :cspan:`2` The highest tunable frequency in units of 62.5 kHz,
+	or if the ``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in
+	units of 62.5 Hz, for this frequency band. A 1 Hz unit is used
+	when the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is set.
+    * - __u32
+      - ``modulation``
+      - :cspan:`2` The supported modulation systems of this frequency
+	band. See :ref:`band-modulation`.
+
+	.. note::
+
+	   Currently only one modulation system per frequency band
+	   is supported. More work will need to be done if multiple
+	   modulation systems are possible. Contact the linux-media
+	   mailing list
+	   (`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__)
+	   if you need such functionality.
+    * - __u32
+      - ``reserved``\ [9]
+      - Reserved for future extensions.
+
+	Applications and drivers must set the array to zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _band-modulation:
+
+.. flat-table:: Band Modulation Systems
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_BAND_MODULATION_VSB``
+      - 0x02
+      - Vestigial Sideband modulation, used for analog TV.
+    * - ``V4L2_BAND_MODULATION_FM``
+      - 0x04
+      - Frequency Modulation, commonly used for analog radio.
+    * - ``V4L2_BAND_MODULATION_AM``
+      - 0x08
+      - Amplitude Modulation, commonly used for analog radio.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The ``tuner`` or ``index`` is out of bounds or the ``type`` field is
+    wrong.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumaudio.rst b/Documentation/userspace-api/media/v4l/vidioc-enumaudio.rst
new file mode 100644
index 000000000000..afe4821e5863
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enumaudio.rst
@@ -0,0 +1,62 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUMAUDIO:
+
+**********************
+ioctl VIDIOC_ENUMAUDIO
+**********************
+
+Name
+====
+
+VIDIOC_ENUMAUDIO - Enumerate audio inputs
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUMAUDIO, struct v4l2_audio *argp )
+    :name: VIDIOC_ENUMAUDIO
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_audio`.
+
+
+Description
+===========
+
+To query the attributes of an audio input applications initialize the
+``index`` field and zero out the ``reserved`` array of a struct
+:c:type:`v4l2_audio` and call the :ref:`VIDIOC_ENUMAUDIO`
+ioctl with a pointer to this structure. Drivers fill the rest of the
+structure or return an ``EINVAL`` error code when the index is out of
+bounds. To enumerate all audio inputs applications shall begin at index
+zero, incrementing by one until the driver returns ``EINVAL``.
+
+See :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` for a description of struct
+:c:type:`v4l2_audio`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The number of the audio input is out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumaudioout.rst b/Documentation/userspace-api/media/v4l/vidioc-enumaudioout.rst
new file mode 100644
index 000000000000..31c2ae460e2d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enumaudioout.rst
@@ -0,0 +1,67 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUMAUDOUT:
+
+***********************
+ioctl VIDIOC_ENUMAUDOUT
+***********************
+
+Name
+====
+
+VIDIOC_ENUMAUDOUT - Enumerate audio outputs
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUMAUDOUT, struct v4l2_audioout *argp )
+    :name: VIDIOC_ENUMAUDOUT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_audioout`.
+
+
+Description
+===========
+
+To query the attributes of an audio output applications initialize the
+``index`` field and zero out the ``reserved`` array of a struct
+:c:type:`v4l2_audioout` and call the ``VIDIOC_G_AUDOUT``
+ioctl with a pointer to this structure. Drivers fill the rest of the
+structure or return an ``EINVAL`` error code when the index is out of
+bounds. To enumerate all audio outputs applications shall begin at index
+zero, incrementing by one until the driver returns ``EINVAL``.
+
+.. note::
+
+    Connectors on a TV card to loop back the received audio signal
+    to a sound card are not audio outputs in this sense.
+
+See :ref:`VIDIOC_G_AUDIOout <VIDIOC_G_AUDOUT>` for a description of struct
+:c:type:`v4l2_audioout`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The number of the audio output is out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst b/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
new file mode 100644
index 000000000000..510670bff3de
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
@@ -0,0 +1,242 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUMINPUT:
+
+**********************
+ioctl VIDIOC_ENUMINPUT
+**********************
+
+Name
+====
+
+VIDIOC_ENUMINPUT - Enumerate video inputs
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUMINPUT, struct v4l2_input *argp )
+    :name: VIDIOC_ENUMINPUT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_input`.
+
+
+Description
+===========
+
+To query the attributes of a video input applications initialize the
+``index`` field of struct :c:type:`v4l2_input` and call the
+:ref:`VIDIOC_ENUMINPUT` with a pointer to this structure. Drivers
+fill the rest of the structure or return an ``EINVAL`` error code when the
+index is out of bounds. To enumerate all inputs applications shall begin
+at index zero, incrementing by one until the driver returns ``EINVAL``.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_input
+
+.. flat-table:: struct v4l2_input
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - Identifies the input, set by the application.
+    * - __u8
+      - ``name``\ [32]
+      - Name of the video input, a NUL-terminated ASCII string, for
+	example: "Vin (Composite 2)". This information is intended for the
+	user, preferably the connector label on the device itself.
+    * - __u32
+      - ``type``
+      - Type of the input, see :ref:`input-type`.
+    * - __u32
+      - ``audioset``
+      - Drivers can enumerate up to 32 video and audio inputs. This field
+	shows which audio inputs were selectable as audio source if this
+	was the currently selected video input. It is a bit mask. The LSB
+	corresponds to audio input 0, the MSB to input 31. Any number of
+	bits can be set, or none.
+
+	When the driver does not enumerate audio inputs no bits must be
+	set. Applications shall not interpret this as lack of audio
+	support. Some drivers automatically select audio sources and do
+	not enumerate them since there is no choice anyway.
+
+	For details on audio inputs and how to select the current input
+	see :ref:`audio`.
+    * - __u32
+      - ``tuner``
+      - Capture devices can have zero or more tuners (RF demodulators).
+	When the ``type`` is set to ``V4L2_INPUT_TYPE_TUNER`` this is an
+	RF connector and this field identifies the tuner. It corresponds
+	to struct :c:type:`v4l2_tuner` field ``index``. For
+	details on tuners see :ref:`tuner`.
+    * - :ref:`v4l2_std_id <v4l2-std-id>`
+      - ``std``
+      - Every video input supports one or more different video standards.
+	This field is a set of all supported standards. For details on
+	video standards and how to switch see :ref:`standard`.
+    * - __u32
+      - ``status``
+      - This field provides status information about the input. See
+	:ref:`input-status` for flags. With the exception of the sensor
+	orientation bits ``status`` is only valid when this is the current
+	input.
+    * - __u32
+      - ``capabilities``
+      - This field provides capabilities for the input. See
+	:ref:`input-capabilities` for flags.
+    * - __u32
+      - ``reserved``\ [3]
+      - Reserved for future extensions. Drivers must set the array to
+	zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _input-type:
+
+.. flat-table:: Input Types
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_INPUT_TYPE_TUNER``
+      - 1
+      - This input uses a tuner (RF demodulator).
+    * - ``V4L2_INPUT_TYPE_CAMERA``
+      - 2
+      - Any non-tuner video input, for example Composite Video,
+	S-Video, HDMI, camera sensor. The naming as ``_TYPE_CAMERA`` is historical,
+	today we would have called it ``_TYPE_VIDEO``.
+    * - ``V4L2_INPUT_TYPE_TOUCH``
+      - 3
+      - This input is a touch device for capturing raw touch data.
+
+
+
+.. tabularcolumns:: |p{4.8cm}|p{2.6cm}|p{10.1cm}|
+
+.. _input-status:
+
+.. flat-table:: Input Status Flags
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - :cspan:`2` General
+    * - ``V4L2_IN_ST_NO_POWER``
+      - 0x00000001
+      - Attached device is off.
+    * - ``V4L2_IN_ST_NO_SIGNAL``
+      - 0x00000002
+      -
+    * - ``V4L2_IN_ST_NO_COLOR``
+      - 0x00000004
+      - The hardware supports color decoding, but does not detect color
+	modulation in the signal.
+    * - :cspan:`2` Sensor Orientation
+    * - ``V4L2_IN_ST_HFLIP``
+      - 0x00000010
+      - The input is connected to a device that produces a signal that is
+	flipped horizontally and does not correct this before passing the
+	signal to userspace.
+    * - ``V4L2_IN_ST_VFLIP``
+      - 0x00000020
+      - The input is connected to a device that produces a signal that is
+	flipped vertically and does not correct this before passing the
+	signal to userspace.
+	.. note:: A 180 degree rotation is the same as HFLIP | VFLIP
+    * - :cspan:`2` Analog Video
+    * - ``V4L2_IN_ST_NO_H_LOCK``
+      - 0x00000100
+      - No horizontal sync lock.
+    * - ``V4L2_IN_ST_COLOR_KILL``
+      - 0x00000200
+      - A color killer circuit automatically disables color decoding when
+	it detects no color modulation. When this flag is set the color
+	killer is enabled *and* has shut off color decoding.
+    * - ``V4L2_IN_ST_NO_V_LOCK``
+      - 0x00000400
+      - No vertical sync lock.
+    * - ``V4L2_IN_ST_NO_STD_LOCK``
+      - 0x00000800
+      - No standard format lock in case of auto-detection format
+	by the component.
+    * - :cspan:`2` Digital Video
+    * - ``V4L2_IN_ST_NO_SYNC``
+      - 0x00010000
+      - No synchronization lock.
+    * - ``V4L2_IN_ST_NO_EQU``
+      - 0x00020000
+      - No equalizer lock.
+    * - ``V4L2_IN_ST_NO_CARRIER``
+      - 0x00040000
+      - Carrier recovery failed.
+    * - :cspan:`2` VCR and Set-Top Box
+    * - ``V4L2_IN_ST_MACROVISION``
+      - 0x01000000
+      - Macrovision is an analog copy prevention system mangling the video
+	signal to confuse video recorders. When this flag is set
+	Macrovision has been detected.
+    * - ``V4L2_IN_ST_NO_ACCESS``
+      - 0x02000000
+      - Conditional access denied.
+    * - ``V4L2_IN_ST_VTR``
+      - 0x04000000
+      - VTR time constant. [?]
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _input-capabilities:
+
+.. flat-table:: Input capabilities
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_IN_CAP_DV_TIMINGS``
+      - 0x00000002
+      - This input supports setting video timings by using
+	``VIDIOC_S_DV_TIMINGS``.
+    * - ``V4L2_IN_CAP_STD``
+      - 0x00000004
+      - This input supports setting the TV standard by using
+	``VIDIOC_S_STD``.
+    * - ``V4L2_IN_CAP_NATIVE_SIZE``
+      - 0x00000008
+      - This input supports setting the native size using the
+	``V4L2_SEL_TGT_NATIVE_SIZE`` selection target, see
+	:ref:`v4l2-selections-common`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_input` ``index`` is out of
+    bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst b/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst
new file mode 100644
index 000000000000..591a99cf8000
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst
@@ -0,0 +1,165 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUMOUTPUT:
+
+***********************
+ioctl VIDIOC_ENUMOUTPUT
+***********************
+
+Name
+====
+
+VIDIOC_ENUMOUTPUT - Enumerate video outputs
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUMOUTPUT, struct v4l2_output *argp )
+    :name: VIDIOC_ENUMOUTPUT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_output`.
+
+
+Description
+===========
+
+To query the attributes of a video outputs applications initialize the
+``index`` field of struct :c:type:`v4l2_output` and call
+the :ref:`VIDIOC_ENUMOUTPUT` with a pointer to this structure.
+Drivers fill the rest of the structure or return an ``EINVAL`` error code
+when the index is out of bounds. To enumerate all outputs applications
+shall begin at index zero, incrementing by one until the driver returns
+``EINVAL``.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_output
+
+.. flat-table:: struct v4l2_output
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - Identifies the output, set by the application.
+    * - __u8
+      - ``name``\ [32]
+      - Name of the video output, a NUL-terminated ASCII string, for
+	example: "Vout". This information is intended for the user,
+	preferably the connector label on the device itself.
+    * - __u32
+      - ``type``
+      - Type of the output, see :ref:`output-type`.
+    * - __u32
+      - ``audioset``
+      - Drivers can enumerate up to 32 video and audio outputs. This field
+	shows which audio outputs were selectable as the current output if
+	this was the currently selected video output. It is a bit mask.
+	The LSB corresponds to audio output 0, the MSB to output 31. Any
+	number of bits can be set, or none.
+
+	When the driver does not enumerate audio outputs no bits must be
+	set. Applications shall not interpret this as lack of audio
+	support. Drivers may automatically select audio outputs without
+	enumerating them.
+
+	For details on audio outputs and how to select the current output
+	see :ref:`audio`.
+    * - __u32
+      - ``modulator``
+      - Output devices can have zero or more RF modulators. When the
+	``type`` is ``V4L2_OUTPUT_TYPE_MODULATOR`` this is an RF connector
+	and this field identifies the modulator. It corresponds to struct
+	:c:type:`v4l2_modulator` field ``index``. For
+	details on modulators see :ref:`tuner`.
+    * - :ref:`v4l2_std_id <v4l2-std-id>`
+      - ``std``
+      - Every video output supports one or more different video standards.
+	This field is a set of all supported standards. For details on
+	video standards and how to switch see :ref:`standard`.
+    * - __u32
+      - ``capabilities``
+      - This field provides capabilities for the output. See
+	:ref:`output-capabilities` for flags.
+    * - __u32
+      - ``reserved``\ [3]
+      - Reserved for future extensions. Drivers must set the array to
+	zero.
+
+
+
+.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}|
+
+.. _output-type:
+
+.. flat-table:: Output Type
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_OUTPUT_TYPE_MODULATOR``
+      - 1
+      - This output is an analog TV modulator.
+    * - ``V4L2_OUTPUT_TYPE_ANALOG``
+      - 2
+      - Any non-modulator video output, for example Composite Video,
+	S-Video, HDMI. The naming as ``_TYPE_ANALOG`` is historical,
+	today we would have called it ``_TYPE_VIDEO``.
+    * - ``V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY``
+      - 3
+      - The video output will be copied to a :ref:`video overlay <overlay>`.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _output-capabilities:
+
+.. flat-table:: Output capabilities
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_OUT_CAP_DV_TIMINGS``
+      - 0x00000002
+      - This output supports setting video timings by using
+	``VIDIOC_S_DV_TIMINGS``.
+    * - ``V4L2_OUT_CAP_STD``
+      - 0x00000004
+      - This output supports setting the TV standard by using
+	``VIDIOC_S_STD``.
+    * - ``V4L2_OUT_CAP_NATIVE_SIZE``
+      - 0x00000008
+      - This output supports setting the native size using the
+	``V4L2_SEL_TGT_NATIVE_SIZE`` selection target, see
+	:ref:`v4l2-selections-common`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_output` ``index`` is out of
+    bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst b/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst
new file mode 100644
index 000000000000..8a0508536c13
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst
@@ -0,0 +1,367 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_ENUMSTD:
+
+*******************************************
+ioctl VIDIOC_ENUMSTD, VIDIOC_SUBDEV_ENUMSTD
+*******************************************
+
+Name
+====
+
+VIDIOC_ENUMSTD - VIDIOC_SUBDEV_ENUMSTD - Enumerate supported video standards
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_ENUMSTD, struct v4l2_standard *argp )
+    :name: VIDIOC_ENUMSTD
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUMSTD, struct v4l2_standard *argp )
+    :name: VIDIOC_SUBDEV_ENUMSTD
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_standard`.
+
+
+Description
+===========
+
+To query the attributes of a video standard, especially a custom (driver
+defined) one, applications initialize the ``index`` field of struct
+:c:type:`v4l2_standard` and call the :ref:`VIDIOC_ENUMSTD`
+ioctl with a pointer to this structure. Drivers fill the rest of the
+structure or return an ``EINVAL`` error code when the index is out of
+bounds. To enumerate all standards applications shall begin at index
+zero, incrementing by one until the driver returns ``EINVAL``. Drivers may
+enumerate a different set of standards after switching the video input
+or output. [#f1]_
+
+
+.. c:type:: v4l2_standard
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_standard
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - Number of the video standard, set by the application.
+    * - :ref:`v4l2_std_id <v4l2-std-id>`
+      - ``id``
+      - The bits in this field identify the standard as one of the common
+	standards listed in :ref:`v4l2-std-id`, or if bits 32 to 63 are
+	set as custom standards. Multiple bits can be set if the hardware
+	does not distinguish between these standards, however separate
+	indices do not indicate the opposite. The ``id`` must be unique.
+	No other enumerated struct :c:type:`v4l2_standard` structure,
+	for this input or output anyway, can contain the same set of bits.
+    * - __u8
+      - ``name``\ [24]
+      - Name of the standard, a NUL-terminated ASCII string, for example:
+	"PAL-B/G", "NTSC Japan". This information is intended for the
+	user.
+    * - struct :c:type:`v4l2_fract`
+      - ``frameperiod``
+      - The frame period (not field period) is numerator / denominator.
+	For example M/NTSC has a frame period of 1001 / 30000 seconds.
+    * - __u32
+      - ``framelines``
+      - Total lines per frame including blanking, e. g. 625 for B/PAL.
+    * - __u32
+      - ``reserved``\ [4]
+      - Reserved for future extensions. Drivers must set the array to
+	zero.
+
+
+
+.. c:type:: v4l2_fract
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_fract
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``numerator``
+      -
+    * - __u32
+      - ``denominator``
+      -
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. _v4l2-std-id:
+
+.. flat-table:: typedef v4l2_std_id
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u64
+      - ``v4l2_std_id``
+      - This type is a set, each bit representing another video standard
+	as listed below and in :ref:`video-standards`. The 32 most
+	significant bits are reserved for custom (driver defined) video
+	standards.
+
+
+
+.. code-block:: c
+
+    #define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
+    #define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
+    #define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
+    #define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
+    #define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
+    #define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
+    #define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
+    #define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
+
+    #define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
+    #define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
+    #define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
+    #define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
+
+``V4L2_STD_PAL_60`` is a hybrid standard with 525 lines, 60 Hz refresh
+rate, and PAL color modulation with a 4.43 MHz color subcarrier. Some
+PAL video recorders can play back NTSC tapes in this mode for display on
+a 50/60 Hz agnostic PAL TV.
+
+
+.. code-block:: c
+
+    #define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)
+    #define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)
+    #define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
+
+``V4L2_STD_NTSC_443`` is a hybrid standard with 525 lines, 60 Hz refresh
+rate, and NTSC color modulation with a 4.43 MHz color subcarrier.
+
+
+.. code-block:: c
+
+    #define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)
+
+    #define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
+    #define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
+    #define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
+    #define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
+    #define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
+    #define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
+    #define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
+    #define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
+
+    /* ATSC/HDTV */
+    #define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
+    #define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
+
+``V4L2_STD_ATSC_8_VSB`` and ``V4L2_STD_ATSC_16_VSB`` are U.S.
+terrestrial digital TV standards. Presently the V4L2 API does not
+support digital TV. See also the Linux DVB API at
+`https://linuxtv.org <https://linuxtv.org>`__.
+
+
+.. code-block:: c
+
+    #define V4L2_STD_PAL_BG         (V4L2_STD_PAL_B         |
+		     V4L2_STD_PAL_B1        |
+		     V4L2_STD_PAL_G)
+    #define V4L2_STD_B              (V4L2_STD_PAL_B         |
+		     V4L2_STD_PAL_B1        |
+		     V4L2_STD_SECAM_B)
+    #define V4L2_STD_GH             (V4L2_STD_PAL_G         |
+		     V4L2_STD_PAL_H         |
+		     V4L2_STD_SECAM_G       |
+		     V4L2_STD_SECAM_H)
+    #define V4L2_STD_PAL_DK         (V4L2_STD_PAL_D         |
+		     V4L2_STD_PAL_D1        |
+		     V4L2_STD_PAL_K)
+    #define V4L2_STD_PAL            (V4L2_STD_PAL_BG        |
+		     V4L2_STD_PAL_DK        |
+		     V4L2_STD_PAL_H         |
+		     V4L2_STD_PAL_I)
+    #define V4L2_STD_NTSC           (V4L2_STD_NTSC_M        |
+		     V4L2_STD_NTSC_M_JP     |
+		     V4L2_STD_NTSC_M_KR)
+    #define V4L2_STD_MN             (V4L2_STD_PAL_M         |
+		     V4L2_STD_PAL_N         |
+		     V4L2_STD_PAL_Nc        |
+		     V4L2_STD_NTSC)
+    #define V4L2_STD_SECAM_DK       (V4L2_STD_SECAM_D       |
+		     V4L2_STD_SECAM_K       |
+		     V4L2_STD_SECAM_K1)
+    #define V4L2_STD_DK             (V4L2_STD_PAL_DK        |
+		     V4L2_STD_SECAM_DK)
+
+    #define V4L2_STD_SECAM          (V4L2_STD_SECAM_B       |
+		     V4L2_STD_SECAM_G       |
+		     V4L2_STD_SECAM_H       |
+		     V4L2_STD_SECAM_DK      |
+		     V4L2_STD_SECAM_L       |
+		     V4L2_STD_SECAM_LC)
+
+    #define V4L2_STD_525_60         (V4L2_STD_PAL_M         |
+		     V4L2_STD_PAL_60        |
+		     V4L2_STD_NTSC          |
+		     V4L2_STD_NTSC_443)
+    #define V4L2_STD_625_50         (V4L2_STD_PAL           |
+		     V4L2_STD_PAL_N         |
+		     V4L2_STD_PAL_Nc        |
+		     V4L2_STD_SECAM)
+
+    #define V4L2_STD_UNKNOWN        0
+    #define V4L2_STD_ALL            (V4L2_STD_525_60        |
+		     V4L2_STD_625_50)
+
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+..                            NTSC/M   PAL/M    /N       /B       /D       /H       /I        SECAM/B    /D       /K1     /L
+.. tabularcolumns:: |p{1.43cm}|p{1.38cm}|p{1.59cm}|p{1.7cm}|p{1.7cm}|p{1.17cm}|p{0.64cm}|p{1.71cm}|p{1.6cm}|p{1.07cm}|p{1.07cm}|p{1.07cm}|
+
+.. _video-standards:
+
+.. flat-table:: Video Standards (based on :ref:`itu470`)
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Characteristics
+      - M/NTSC [#f2]_
+      - M/PAL
+      - N/PAL [#f3]_
+      - B, B1, G/PAL
+      - D, D1, K/PAL
+      - H/PAL
+      - I/PAL
+      - B, G/SECAM
+      - D, K/SECAM
+      - K1/SECAM
+      - L/SECAM
+    * - Frame lines
+      - :cspan:`1` 525
+      - :cspan:`8` 625
+    * - Frame period (s)
+      - :cspan:`1` 1001/30000
+      - :cspan:`8` 1/25
+    * - Chrominance sub-carrier frequency (Hz)
+      - 3579545 ± 10
+      - 3579611.49 ± 10
+      - 4433618.75 ± 5
+
+	(3582056.25 ± 5)
+      - :cspan:`3` 4433618.75 ± 5
+      - 4433618.75 ± 1
+      - :cspan:`2` f\ :sub:`OR` = 4406250 ± 2000,
+
+	f\ :sub:`OB` = 4250000 ± 2000
+    * - Nominal radio-frequency channel bandwidth (MHz)
+      - 6
+      - 6
+      - 6
+      - B: 7; B1, G: 8
+      - 8
+      - 8
+      - 8
+      - 8
+      - 8
+      - 8
+      - 8
+    * - Sound carrier relative to vision carrier (MHz)
+      - 4.5
+      - 4.5
+      - 4.5
+      - 5.5 ± 0.001  [#f4]_  [#f5]_  [#f6]_  [#f7]_
+      - 6.5 ± 0.001
+      - 5.5
+      - 5.9996 ± 0.0005
+      - 5.5 ± 0.001
+      - 6.5 ± 0.001
+      - 6.5
+      - 6.5 [#f8]_
+
+.. raw:: latex
+
+    \endgroup
+
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_standard` ``index`` is out
+    of bounds.
+
+ENODATA
+    Standard video timings are not supported for this input or output.
+
+.. [#f1]
+   The supported standards may overlap and we need an unambiguous set to
+   find the current standard returned by :ref:`VIDIOC_G_STD <VIDIOC_G_STD>`.
+
+.. [#f2]
+   Japan uses a standard similar to M/NTSC (V4L2_STD_NTSC_M_JP).
+
+.. [#f3]
+   The values in brackets apply to the combination N/PAL a.k.a.
+   N\ :sub:`C` used in Argentina (V4L2_STD_PAL_Nc).
+
+.. [#f4]
+   In the Federal Republic of Germany, Austria, Italy, the Netherlands,
+   Slovakia and Switzerland a system of two sound carriers is used, the
+   frequency of the second carrier being 242.1875 kHz above the
+   frequency of the first sound carrier. For stereophonic sound
+   transmissions a similar system is used in Australia.
+
+.. [#f5]
+   New Zealand uses a sound carrier displaced 5.4996 ± 0.0005 MHz from
+   the vision carrier.
+
+.. [#f6]
+   In Denmark, Finland, New Zealand, Sweden and Spain a system of two
+   sound carriers is used. In Iceland, Norway and Poland the same system
+   is being introduced. The second carrier is 5.85 MHz above the vision
+   carrier and is DQPSK modulated with 728 kbit/s sound and data
+   multiplex. (NICAM system)
+
+.. [#f7]
+   In the United Kingdom, a system of two sound carriers is used. The
+   second sound carrier is 6.552 MHz above the vision carrier and is
+   DQPSK modulated with a 728 kbit/s sound and data multiplex able to
+   carry two sound channels. (NICAM system)
+
+.. [#f8]
+   In France, a digital carrier 5.85 MHz away from the vision carrier
+   may be used in addition to the main sound carrier. It is modulated in
+   differentially encoded QPSK with a 728 kbit/s sound and data
+   multiplexer capable of carrying two sound channels. (NICAM system)
diff --git a/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst
new file mode 100644
index 000000000000..384a9be9eba0
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst
@@ -0,0 +1,175 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_EXPBUF:
+
+*******************
+ioctl VIDIOC_EXPBUF
+*******************
+
+Name
+====
+
+VIDIOC_EXPBUF - Export a buffer as a DMABUF file descriptor.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_EXPBUF, struct v4l2_exportbuffer *argp )
+    :name: VIDIOC_EXPBUF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_exportbuffer`.
+
+
+Description
+===========
+
+This ioctl is an extension to the :ref:`memory mapping <mmap>` I/O
+method, therefore it is available only for ``V4L2_MEMORY_MMAP`` buffers.
+It can be used to export a buffer as a DMABUF file at any time after
+buffers have been allocated with the
+:ref:`VIDIOC_REQBUFS` ioctl.
+
+To export a buffer, applications fill struct
+:c:type:`v4l2_exportbuffer`. The ``type`` field is
+set to the same buffer type as was previously used with struct
+:c:type:`v4l2_requestbuffers` ``type``.
+Applications must also set the ``index`` field. Valid index numbers
+range from zero to the number of buffers allocated with
+:ref:`VIDIOC_REQBUFS` (struct
+:c:type:`v4l2_requestbuffers` ``count``) minus
+one. For the multi-planar API, applications set the ``plane`` field to
+the index of the plane to be exported. Valid planes range from zero to
+the maximal number of valid planes for the currently active format. For
+the single-planar API, applications must set ``plane`` to zero.
+Additional flags may be posted in the ``flags`` field. Refer to a manual
+for open() for details. Currently only O_CLOEXEC, O_RDONLY, O_WRONLY,
+and O_RDWR are supported. All other fields must be set to zero. In the
+case of multi-planar API, every plane is exported separately using
+multiple :ref:`VIDIOC_EXPBUF` calls.
+
+After calling :ref:`VIDIOC_EXPBUF` the ``fd`` field will be set by a
+driver. This is a DMABUF file descriptor. The application may pass it to
+other DMABUF-aware devices. Refer to :ref:`DMABUF importing <dmabuf>`
+for details about importing DMABUF files into V4L2 nodes. It is
+recommended to close a DMABUF file when it is no longer used to allow
+the associated memory to be reclaimed.
+
+
+Examples
+========
+
+
+.. code-block:: c
+
+    int buffer_export(int v4lfd, enum v4l2_buf_type bt, int index, int *dmafd)
+    {
+	struct v4l2_exportbuffer expbuf;
+
+	memset(&expbuf, 0, sizeof(expbuf));
+	expbuf.type = bt;
+	expbuf.index = index;
+	if (ioctl(v4lfd, VIDIOC_EXPBUF, &expbuf) == -1) {
+	    perror("VIDIOC_EXPBUF");
+	    return -1;
+	}
+
+	*dmafd = expbuf.fd;
+
+	return 0;
+    }
+
+
+.. code-block:: c
+
+    int buffer_export_mp(int v4lfd, enum v4l2_buf_type bt, int index,
+	int dmafd[], int n_planes)
+    {
+	int i;
+
+	for (i = 0; i < n_planes; ++i) {
+	    struct v4l2_exportbuffer expbuf;
+
+	    memset(&expbuf, 0, sizeof(expbuf));
+	    expbuf.type = bt;
+	    expbuf.index = index;
+	    expbuf.plane = i;
+	    if (ioctl(v4lfd, VIDIOC_EXPBUF, &expbuf) == -1) {
+		perror("VIDIOC_EXPBUF");
+		while (i)
+		    close(dmafd[--i]);
+		return -1;
+	    }
+	    dmafd[i] = expbuf.fd;
+	}
+
+	return 0;
+    }
+
+
+.. c:type:: v4l2_exportbuffer
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_exportbuffer
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Type of the buffer, same as struct
+	:c:type:`v4l2_format` ``type`` or struct
+	:c:type:`v4l2_requestbuffers` ``type``, set
+	by the application. See :c:type:`v4l2_buf_type`
+    * - __u32
+      - ``index``
+      - Number of the buffer, set by the application. This field is only
+	used for :ref:`memory mapping <mmap>` I/O and can range from
+	zero to the number of buffers allocated with the
+	:ref:`VIDIOC_REQBUFS` and/or
+	:ref:`VIDIOC_CREATE_BUFS` ioctls.
+    * - __u32
+      - ``plane``
+      - Index of the plane to be exported when using the multi-planar API.
+	Otherwise this value must be set to zero.
+    * - __u32
+      - ``flags``
+      - Flags for the newly created file, currently only ``O_CLOEXEC``,
+	``O_RDONLY``, ``O_WRONLY``, and ``O_RDWR`` are supported, refer to
+	the manual of open() for more details.
+    * - __s32
+      - ``fd``
+      - The DMABUF file descriptor associated with a buffer. Set by the
+	driver.
+    * - __u32
+      - ``reserved[11]``
+      - Reserved field for future use. Drivers and applications must set
+	the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    A queue is not in MMAP mode or DMABUF exporting is not supported or
+    ``flags`` or ``type`` or ``index`` or ``plane`` fields are invalid.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst b/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst
new file mode 100644
index 000000000000..68531bcb62ab
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst
@@ -0,0 +1,135 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_AUDIO:
+
+************************************
+ioctl VIDIOC_G_AUDIO, VIDIOC_S_AUDIO
+************************************
+
+Name
+====
+
+VIDIOC_G_AUDIO - VIDIOC_S_AUDIO - Query or select the current audio input and its attributes
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_AUDIO, struct v4l2_audio *argp )
+    :name: VIDIOC_G_AUDIO
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_AUDIO, const struct v4l2_audio *argp )
+    :name: VIDIOC_S_AUDIO
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_audio`.
+
+
+Description
+===========
+
+To query the current audio input applications zero out the ``reserved``
+array of a struct :c:type:`v4l2_audio` and call the
+:ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` ioctl with a pointer to this structure. Drivers fill
+the rest of the structure or return an ``EINVAL`` error code when the device
+has no audio inputs, or none which combine with the current video input.
+
+Audio inputs have one writable property, the audio mode. To select the
+current audio input *and* change the audio mode, applications initialize
+the ``index`` and ``mode`` fields, and the ``reserved`` array of a
+struct :c:type:`v4l2_audio` structure and call the :ref:`VIDIOC_S_AUDIO <VIDIOC_G_AUDIO>`
+ioctl. Drivers may switch to a different audio mode if the request
+cannot be satisfied. However, this is a write-only ioctl, it does not
+return the actual new audio mode.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_audio
+
+.. flat-table:: struct v4l2_audio
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - Identifies the audio input, set by the driver or application.
+    * - __u8
+      - ``name``\ [32]
+      - Name of the audio input, a NUL-terminated ASCII string, for
+	example: "Line In". This information is intended for the user,
+	preferably the connector label on the device itself.
+    * - __u32
+      - ``capability``
+      - Audio capability flags, see :ref:`audio-capability`.
+    * - __u32
+      - ``mode``
+      - Audio mode flags set by drivers and applications (on
+	:ref:`VIDIOC_S_AUDIO <VIDIOC_G_AUDIO>` ioctl), see :ref:`audio-mode`.
+    * - __u32
+      - ``reserved``\ [2]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _audio-capability:
+
+.. flat-table:: Audio Capability Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_AUDCAP_STEREO``
+      - 0x00001
+      - This is a stereo input. The flag is intended to automatically
+	disable stereo recording etc. when the signal is always monaural.
+	The API provides no means to detect if stereo is *received*,
+	unless the audio input belongs to a tuner.
+    * - ``V4L2_AUDCAP_AVL``
+      - 0x00002
+      - Automatic Volume Level mode is supported.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _audio-mode:
+
+.. flat-table:: Audio Mode Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_AUDMODE_AVL``
+      - 0x00001
+      - AVL mode is on.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    No audio inputs combine with the current video input, or the number
+    of the selected audio input is out of bounds or it does not combine.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst b/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst
new file mode 100644
index 000000000000..e13b74bf5ce3
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst
@@ -0,0 +1,108 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_AUDOUT:
+
+**************************************
+ioctl VIDIOC_G_AUDOUT, VIDIOC_S_AUDOUT
+**************************************
+
+Name
+====
+
+VIDIOC_G_AUDOUT - VIDIOC_S_AUDOUT - Query or select the current audio output
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_AUDOUT, struct v4l2_audioout *argp )
+    :name: VIDIOC_G_AUDOUT
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_AUDOUT, const struct v4l2_audioout *argp )
+    :name: VIDIOC_S_AUDOUT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_audioout`.
+
+
+Description
+===========
+
+To query the current audio output applications zero out the ``reserved``
+array of a struct :c:type:`v4l2_audioout` and call the
+``VIDIOC_G_AUDOUT`` ioctl with a pointer to this structure. Drivers fill
+the rest of the structure or return an ``EINVAL`` error code when the device
+has no audio inputs, or none which combine with the current video
+output.
+
+Audio outputs have no writable properties. Nevertheless, to select the
+current audio output applications can initialize the ``index`` field and
+``reserved`` array (which in the future may contain writable properties)
+of a struct :c:type:`v4l2_audioout` structure and call the
+``VIDIOC_S_AUDOUT`` ioctl. Drivers switch to the requested output or
+return the ``EINVAL`` error code when the index is out of bounds. This is a
+write-only ioctl, it does not return the current audio output attributes
+as ``VIDIOC_G_AUDOUT`` does.
+
+.. note::
+
+   Connectors on a TV card to loop back the received audio signal
+   to a sound card are not audio outputs in this sense.
+
+
+.. c:type:: v4l2_audioout
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_audioout
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - Identifies the audio output, set by the driver or application.
+    * - __u8
+      - ``name``\ [32]
+      - Name of the audio output, a NUL-terminated ASCII string, for
+	example: "Line Out". This information is intended for the user,
+	preferably the connector label on the device itself.
+    * - __u32
+      - ``capability``
+      - Audio capability flags, none defined yet. Drivers must set this
+	field to zero.
+    * - __u32
+      - ``mode``
+      - Audio mode, none defined yet. Drivers and applications (on
+	``VIDIOC_S_AUDOUT``) must set this field to zero.
+    * - __u32
+      - ``reserved``\ [2]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    No audio outputs combine with the current video output, or the
+    number of the selected audio output is out of bounds or it does not
+    combine.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst
new file mode 100644
index 000000000000..10e086be55d5
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst
@@ -0,0 +1,119 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_CROP:
+
+**********************************
+ioctl VIDIOC_G_CROP, VIDIOC_S_CROP
+**********************************
+
+Name
+====
+
+VIDIOC_G_CROP - VIDIOC_S_CROP - Get or set the current cropping rectangle
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_CROP, struct v4l2_crop *argp )
+    :name: VIDIOC_G_CROP
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_CROP, const struct v4l2_crop *argp )
+    :name: VIDIOC_S_CROP
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_crop`.
+
+
+Description
+===========
+
+To query the cropping rectangle size and position applications set the
+``type`` field of a struct :c:type:`v4l2_crop` structure to the
+respective buffer (stream) type and call the :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` ioctl
+with a pointer to this structure. The driver fills the rest of the
+structure or returns the ``EINVAL`` error code if cropping is not supported.
+
+To change the cropping rectangle applications initialize the ``type``
+and struct :c:type:`v4l2_rect` substructure named ``c`` of a
+v4l2_crop structure and call the :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` ioctl with a pointer
+to this structure.
+
+The driver first adjusts the requested dimensions against hardware
+limits, i. e. the bounds given by the capture/output window, and it
+rounds to the closest possible values of horizontal and vertical offset,
+width and height. In particular the driver must round the vertical
+offset of the cropping rectangle to frame lines modulo two, such that
+the field order cannot be confused.
+
+Second the driver adjusts the image size (the opposite rectangle of the
+scaling process, source or target depending on the data direction) to
+the closest size possible while maintaining the current horizontal and
+vertical scaling factor.
+
+Finally the driver programs the hardware with the actual cropping and
+image parameters. :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` is a write-only ioctl, it does not
+return the actual parameters. To query them applications must call
+:ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_G_FMT`. When the
+parameters are unsuitable the application may modify the cropping or
+image parameters and repeat the cycle until satisfactory parameters have
+been negotiated.
+
+When cropping is not supported then no parameters are changed and
+:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` returns the ``EINVAL`` error code.
+
+
+.. c:type:: v4l2_crop
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_crop
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Type of the data stream, set by the application. Only these types
+	are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
+	``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and
+	``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note below.
+    * - struct :c:type:`v4l2_rect`
+      - ``c``
+      - Cropping rectangle. The same co-ordinate system as for struct
+	:c:type:`v4l2_cropcap` ``bounds`` is used.
+
+.. note::
+   Unfortunately in the case of multiplanar buffer types
+   (``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``)
+   this API was messed up with regards to how the :c:type:`v4l2_crop` ``type`` field
+   should be filled in. Some drivers only accepted the ``_MPLANE`` buffer type while
+   other drivers only accepted a non-multiplanar buffer type (i.e. without the
+   ``_MPLANE`` at the end).
+
+   Starting with kernel 4.13 both variations are allowed.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+ENODATA
+    Cropping is not supported for this input or output.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst
new file mode 100644
index 000000000000..9831b7514028
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst
@@ -0,0 +1,106 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_CTRL:
+
+**********************************
+ioctl VIDIOC_G_CTRL, VIDIOC_S_CTRL
+**********************************
+
+Name
+====
+
+VIDIOC_G_CTRL - VIDIOC_S_CTRL - Get or set the value of a control
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_CTRL, struct v4l2_control *argp )
+    :name: VIDIOC_G_CTRL
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_CTRL, struct v4l2_control *argp )
+    :name: VIDIOC_S_CTRL
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_control`.
+
+
+Description
+===========
+
+To get the current value of a control applications initialize the ``id``
+field of a struct :c:type:`v4l2_control` and call the
+:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` ioctl with a pointer to this structure. To change the
+value of a control applications initialize the ``id`` and ``value``
+fields of a struct :c:type:`v4l2_control` and call the
+:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctl.
+
+When the ``id`` is invalid drivers return an ``EINVAL`` error code. When the
+``value`` is out of bounds drivers can choose to take the closest valid
+value or return an ``ERANGE`` error code, whatever seems more appropriate.
+However, :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` is a write-only ioctl, it does not return the
+actual new value. If the ``value`` is inappropriate for the control
+(e.g. if it refers to an unsupported menu index of a menu control), then
+EINVAL error code is returned as well.
+
+These ioctls work only with user controls. For other control classes the
+:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
+:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` or
+:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` must be used.
+
+
+.. c:type:: v4l2_control
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_control
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``id``
+      - Identifies the control, set by the application.
+    * - __s32
+      - ``value``
+      - New value or current value.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_control` ``id`` is invalid
+    or the ``value`` is inappropriate for the given control (i.e. if a
+    menu item is selected that is not supported by the driver according
+    to :ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>`).
+
+ERANGE
+    The struct :c:type:`v4l2_control` ``value`` is out of
+    bounds.
+
+EBUSY
+    The control is temporarily not changeable, possibly because another
+    applications took over control of the device function this control
+    belongs to.
+
+EACCES
+    Attempt to set a read-only control or to get a write-only control.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst
new file mode 100644
index 000000000000..84806a893cb7
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst
@@ -0,0 +1,312 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_DV_TIMINGS:
+
+**********************************************
+ioctl VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS
+**********************************************
+
+Name
+====
+
+VIDIOC_G_DV_TIMINGS - VIDIOC_S_DV_TIMINGS - VIDIOC_SUBDEV_G_DV_TIMINGS - VIDIOC_SUBDEV_S_DV_TIMINGS - Get or set DV timings for input or output
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_DV_TIMINGS, struct v4l2_dv_timings *argp )
+    :name: VIDIOC_G_DV_TIMINGS
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_DV_TIMINGS, struct v4l2_dv_timings *argp )
+    :name: VIDIOC_S_DV_TIMINGS
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_DV_TIMINGS, struct v4l2_dv_timings *argp )
+    :name: VIDIOC_SUBDEV_G_DV_TIMINGS
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_DV_TIMINGS, struct v4l2_dv_timings *argp )
+    :name: VIDIOC_SUBDEV_S_DV_TIMINGS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_dv_timings`.
+
+
+Description
+===========
+
+To set DV timings for the input or output, applications use the
+:ref:`VIDIOC_S_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>` ioctl and to get the current timings,
+applications use the :ref:`VIDIOC_G_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>` ioctl. The detailed timing
+information is filled in using the structure struct
+:c:type:`v4l2_dv_timings`. These ioctls take a
+pointer to the struct :c:type:`v4l2_dv_timings`
+structure as argument. If the ioctl is not supported or the timing
+values are not correct, the driver returns ``EINVAL`` error code.
+
+The ``linux/v4l2-dv-timings.h`` header can be used to get the timings of
+the formats in the :ref:`cea861` and :ref:`vesadmt` standards. If
+the current input or output does not support DV timings (e.g. if
+:ref:`VIDIOC_ENUMINPUT` does not set the
+``V4L2_IN_CAP_DV_TIMINGS`` flag), then ``ENODATA`` error code is returned.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    This ioctl is not supported, or the :ref:`VIDIOC_S_DV_TIMINGS <VIDIOC_G_DV_TIMINGS>`
+    parameter was unsuitable.
+
+ENODATA
+    Digital video timings are not supported for this input or output.
+
+EBUSY
+    The device is busy and therefore can not change the timings.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_bt_timings
+
+.. flat-table:: struct v4l2_bt_timings
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``width``
+      - Width of the active video in pixels.
+    * - __u32
+      - ``height``
+      - Height of the active video frame in lines. So for interlaced
+	formats the height of the active video in each field is
+	``height``/2.
+    * - __u32
+      - ``interlaced``
+      - Progressive (``V4L2_DV_PROGRESSIVE``) or interlaced (``V4L2_DV_INTERLACED``).
+    * - __u32
+      - ``polarities``
+      - This is a bit mask that defines polarities of sync signals. bit 0
+	(``V4L2_DV_VSYNC_POS_POL``) is for vertical sync polarity and bit
+	1 (``V4L2_DV_HSYNC_POS_POL``) is for horizontal sync polarity. If
+	the bit is set (1) it is positive polarity and if is cleared (0),
+	it is negative polarity.
+    * - __u64
+      - ``pixelclock``
+      - Pixel clock in Hz. Ex. 74.25MHz->74250000
+    * - __u32
+      - ``hfrontporch``
+      - Horizontal front porch in pixels
+    * - __u32
+      - ``hsync``
+      - Horizontal sync length in pixels
+    * - __u32
+      - ``hbackporch``
+      - Horizontal back porch in pixels
+    * - __u32
+      - ``vfrontporch``
+      - Vertical front porch in lines. For interlaced formats this refers
+	to the odd field (aka field 1).
+    * - __u32
+      - ``vsync``
+      - Vertical sync length in lines. For interlaced formats this refers
+	to the odd field (aka field 1).
+    * - __u32
+      - ``vbackporch``
+      - Vertical back porch in lines. For interlaced formats this refers
+	to the odd field (aka field 1).
+    * - __u32
+      - ``il_vfrontporch``
+      - Vertical front porch in lines for the even field (aka field 2) of
+	interlaced field formats. Must be 0 for progressive formats.
+    * - __u32
+      - ``il_vsync``
+      - Vertical sync length in lines for the even field (aka field 2) of
+	interlaced field formats. Must be 0 for progressive formats.
+    * - __u32
+      - ``il_vbackporch``
+      - Vertical back porch in lines for the even field (aka field 2) of
+	interlaced field formats. Must be 0 for progressive formats.
+    * - __u32
+      - ``standards``
+      - The video standard(s) this format belongs to. This will be filled
+	in by the driver. Applications must set this to 0. See
+	:ref:`dv-bt-standards` for a list of standards.
+    * - __u32
+      - ``flags``
+      - Several flags giving more information about the format. See
+	:ref:`dv-bt-flags` for a description of the flags.
+    * - struct :c:type:`v4l2_fract`
+      - ``picture_aspect``
+      - The picture aspect if the pixels are not square. Only valid if the
+        ``V4L2_DV_FL_HAS_PICTURE_ASPECT`` flag is set.
+    * - __u8
+      - ``cea861_vic``
+      - The Video Identification Code according to the CEA-861 standard.
+        Only valid if the ``V4L2_DV_FL_HAS_CEA861_VIC`` flag is set.
+    * - __u8
+      - ``hdmi_vic``
+      - The Video Identification Code according to the HDMI standard.
+        Only valid if the ``V4L2_DV_FL_HAS_HDMI_VIC`` flag is set.
+    * - __u8
+      - ``reserved[46]``
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{7.0cm}|p{3.5cm}|
+
+.. c:type:: v4l2_dv_timings
+
+.. flat-table:: struct v4l2_dv_timings
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Type of DV timings as listed in :ref:`dv-timing-types`.
+    * - union {
+      - (anonymous)
+    * - struct :c:type:`v4l2_bt_timings`
+      - ``bt``
+      - Timings defined by BT.656/1120 specifications
+    * - __u32
+      - ``reserved``\ [32]
+      -
+    * - }
+      -
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. _dv-timing-types:
+
+.. flat-table:: DV Timing types
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - Timing type
+      - value
+      - Description
+    * -
+      -
+      -
+    * - ``V4L2_DV_BT_656_1120``
+      - 0
+      - BT.656/1120 timings
+
+.. tabularcolumns:: |p{4.5cm}|p{12.8cm}|
+
+.. _dv-bt-standards:
+
+.. flat-table:: DV BT Timing standards
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Timing standard
+      - Description
+    * - ``V4L2_DV_BT_STD_CEA861``
+      - The timings follow the CEA-861 Digital TV Profile standard
+    * - ``V4L2_DV_BT_STD_DMT``
+      - The timings follow the VESA Discrete Monitor Timings standard
+    * - ``V4L2_DV_BT_STD_CVT``
+      - The timings follow the VESA Coordinated Video Timings standard
+    * - ``V4L2_DV_BT_STD_GTF``
+      - The timings follow the VESA Generalized Timings Formula standard
+    * - ``V4L2_DV_BT_STD_SDI``
+      - The timings follow the SDI Timings standard.
+	There are no horizontal syncs/porches at all in this format.
+	Total blanking timings must be set in hsync or vsync fields only.
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. _dv-bt-flags:
+
+.. flat-table:: DV BT Timing flags
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Flag
+      - Description
+    * - ``V4L2_DV_FL_REDUCED_BLANKING``
+      - CVT/GTF specific: the timings use reduced blanking (CVT) or the
+	'Secondary GTF' curve (GTF). In both cases the horizontal and/or
+	vertical blanking intervals are reduced, allowing a higher
+	resolution over the same bandwidth. This is a read-only flag,
+	applications must not set this.
+    * - ``V4L2_DV_FL_CAN_REDUCE_FPS``
+      - CEA-861 specific: set for CEA-861 formats with a framerate that is
+	a multiple of six. These formats can be optionally played at 1 /
+	1.001 speed to be compatible with 60 Hz based standards such as
+	NTSC and PAL-M that use a framerate of 29.97 frames per second. If
+	the transmitter can't generate such frequencies, then the flag
+	will also be cleared. This is a read-only flag, applications must
+	not set this.
+    * - ``V4L2_DV_FL_REDUCED_FPS``
+      - CEA-861 specific: only valid for video transmitters or video
+        receivers that have the ``V4L2_DV_FL_CAN_DETECT_REDUCED_FPS``
+	set. This flag is cleared otherwise. It is also only valid for
+	formats with the ``V4L2_DV_FL_CAN_REDUCE_FPS`` flag set, for other
+	formats the flag will be cleared by the driver.
+
+	If the application sets this flag for a transmitter, then the
+	pixelclock used to set up the transmitter is divided by 1.001 to
+	make it compatible with NTSC framerates. If the transmitter can't
+	generate such frequencies, then the flag will be cleared.
+
+	If a video receiver detects that the format uses a reduced framerate,
+	then it will set this flag to signal this to the application.
+    * - ``V4L2_DV_FL_HALF_LINE``
+      - Specific to interlaced formats: if set, then the vertical
+	frontporch of field 1 (aka the odd field) is really one half-line
+	longer and the vertical backporch of field 2 (aka the even field)
+	is really one half-line shorter, so each field has exactly the
+	same number of half-lines. Whether half-lines can be detected or
+	used depends on the hardware.
+    * - ``V4L2_DV_FL_IS_CE_VIDEO``
+      - If set, then this is a Consumer Electronics (CE) video format.
+	Such formats differ from other formats (commonly called IT
+	formats) in that if R'G'B' encoding is used then by default the
+	R'G'B' values use limited range (i.e. 16-235) as opposed to full
+	range (i.e. 0-255). All formats defined in CEA-861 except for the
+	640x480p59.94 format are CE formats.
+    * - ``V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE``
+      - Some formats like SMPTE-125M have an interlaced signal with a odd
+	total height. For these formats, if this flag is set, the first
+	field has the extra line. Else, it is the second field.
+    * - ``V4L2_DV_FL_HAS_PICTURE_ASPECT``
+      - If set, then the picture_aspect field is valid. Otherwise assume that
+        the pixels are square, so the picture aspect ratio is the same as the
+	width to height ratio.
+    * - ``V4L2_DV_FL_HAS_CEA861_VIC``
+      - If set, then the cea861_vic field is valid and contains the Video
+        Identification Code as per the CEA-861 standard.
+    * - ``V4L2_DV_FL_HAS_HDMI_VIC``
+      - If set, then the hdmi_vic field is valid and contains the Video
+        Identification Code as per the HDMI standard (HDMI Vendor Specific
+	InfoFrame).
+    * - ``V4L2_DV_FL_CAN_DETECT_REDUCED_FPS``
+      - CEA-861 specific: only valid for video receivers, the flag is
+        cleared by transmitters.
+        If set, then the hardware can detect the difference between
+	regular framerates and framerates reduced by 1000/1001. E.g.:
+	60 vs 59.94 Hz, 30 vs 29.97 Hz or 24 vs 23.976 Hz.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst b/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst
new file mode 100644
index 000000000000..0620f4cbbcbd
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst
@@ -0,0 +1,154 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_EDID:
+
+******************************************************************************
+ioctl VIDIOC_G_EDID, VIDIOC_S_EDID, VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID
+******************************************************************************
+
+Name
+====
+
+VIDIOC_G_EDID - VIDIOC_S_EDID - VIDIOC_SUBDEV_G_EDID - VIDIOC_SUBDEV_S_EDID - Get or set the EDID of a video receiver/transmitter
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_EDID, struct v4l2_edid *argp )
+    :name: VIDIOC_G_EDID
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_EDID, struct v4l2_edid *argp )
+    :name: VIDIOC_S_EDID
+
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_EDID, struct v4l2_edid *argp )
+    :name: VIDIOC_SUBDEV_G_EDID
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_EDID, struct v4l2_edid *argp )
+    :name: VIDIOC_SUBDEV_S_EDID
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+   Pointer to struct :c:type:`v4l2_edid`.
+
+
+Description
+===========
+
+These ioctls can be used to get or set an EDID associated with an input
+from a receiver or an output of a transmitter device. They can be used
+with subdevice nodes (/dev/v4l-subdevX) or with video nodes
+(/dev/videoX).
+
+When used with video nodes the ``pad`` field represents the input (for
+video capture devices) or output (for video output devices) index as is
+returned by :ref:`VIDIOC_ENUMINPUT` and
+:ref:`VIDIOC_ENUMOUTPUT` respectively. When used
+with subdevice nodes the ``pad`` field represents the input or output
+pad of the subdevice. If there is no EDID support for the given ``pad``
+value, then the ``EINVAL`` error code will be returned.
+
+To get the EDID data the application has to fill in the ``pad``,
+``start_block``, ``blocks`` and ``edid`` fields, zero the ``reserved``
+array and call :ref:`VIDIOC_G_EDID <VIDIOC_G_EDID>`. The current EDID from block
+``start_block`` and of size ``blocks`` will be placed in the memory
+``edid`` points to. The ``edid`` pointer must point to memory at least
+``blocks`` * 128 bytes large (the size of one block is 128 bytes).
+
+If there are fewer blocks than specified, then the driver will set
+``blocks`` to the actual number of blocks. If there are no EDID blocks
+available at all, then the error code ``ENODATA`` is set.
+
+If blocks have to be retrieved from the sink, then this call will block
+until they have been read.
+
+If ``start_block`` and ``blocks`` are both set to 0 when
+:ref:`VIDIOC_G_EDID <VIDIOC_G_EDID>` is called, then the driver will set ``blocks`` to the
+total number of available EDID blocks and it will return 0 without
+copying any data. This is an easy way to discover how many EDID blocks
+there are.
+
+.. note::
+
+   If there are no EDID blocks available at all, then
+   the driver will set ``blocks`` to 0 and it returns 0.
+
+To set the EDID blocks of a receiver the application has to fill in the
+``pad``, ``blocks`` and ``edid`` fields, set ``start_block`` to 0 and
+zero the ``reserved`` array. It is not possible to set part of an EDID,
+it is always all or nothing. Setting the EDID data is only valid for
+receivers as it makes no sense for a transmitter.
+
+The driver assumes that the full EDID is passed in. If there are more
+EDID blocks than the hardware can handle then the EDID is not written,
+but instead the error code ``E2BIG`` is set and ``blocks`` is set to the
+maximum that the hardware supports. If ``start_block`` is any value
+other than 0 then the error code ``EINVAL`` is set.
+
+To disable an EDID you set ``blocks`` to 0. Depending on the hardware
+this will drive the hotplug pin low and/or block the source from reading
+the EDID data in some way. In any case, the end result is the same: the
+EDID is no longer available.
+
+
+.. c:type:: v4l2_edid
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_edid
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``pad``
+      - Pad for which to get/set the EDID blocks. When used with a video
+	device node the pad represents the input or output index as
+	returned by :ref:`VIDIOC_ENUMINPUT` and
+	:ref:`VIDIOC_ENUMOUTPUT` respectively.
+    * - __u32
+      - ``start_block``
+      - Read the EDID from starting with this block. Must be 0 when
+	setting the EDID.
+    * - __u32
+      - ``blocks``
+      - The number of blocks to get or set. Must be less or equal to 256
+	(the maximum number of blocks as defined by the standard). When
+	you set the EDID and ``blocks`` is 0, then the EDID is disabled or
+	erased.
+    * - __u32
+      - ``reserved``\ [5]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+    * - __u8 *
+      - ``edid``
+      - Pointer to memory that contains the EDID. The minimum size is
+	``blocks`` * 128.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+``ENODATA``
+    The EDID data is not available.
+
+``E2BIG``
+    The EDID data you provided is more than the hardware can handle.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst b/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst
new file mode 100644
index 000000000000..8aad30a7c6c3
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst
@@ -0,0 +1,156 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_ENC_INDEX:
+
+************************
+ioctl VIDIOC_G_ENC_INDEX
+************************
+
+Name
+====
+
+VIDIOC_G_ENC_INDEX - Get meta data about a compressed video stream
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_ENC_INDEX, struct v4l2_enc_idx *argp )
+    :name: VIDIOC_G_ENC_INDEX
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_enc_idx`.
+
+
+Description
+===========
+
+The :ref:`VIDIOC_G_ENC_INDEX <VIDIOC_G_ENC_INDEX>` ioctl provides meta data about a compressed
+video stream the same or another application currently reads from the
+driver, which is useful for random access into the stream without
+decoding it.
+
+To read the data applications must call :ref:`VIDIOC_G_ENC_INDEX <VIDIOC_G_ENC_INDEX>` with a
+pointer to a struct :c:type:`v4l2_enc_idx`. On success
+the driver fills the ``entry`` array, stores the number of elements
+written in the ``entries`` field, and initializes the ``entries_cap``
+field.
+
+Each element of the ``entry`` array contains meta data about one
+picture. A :ref:`VIDIOC_G_ENC_INDEX <VIDIOC_G_ENC_INDEX>` call reads up to
+``V4L2_ENC_IDX_ENTRIES`` entries from a driver buffer, which can hold up
+to ``entries_cap`` entries. This number can be lower or higher than
+``V4L2_ENC_IDX_ENTRIES``, but not zero. When the application fails to
+read the meta data in time the oldest entries will be lost. When the
+buffer is empty or no capturing/encoding is in progress, ``entries``
+will be zero.
+
+Currently this ioctl is only defined for MPEG-2 program streams and
+video elementary streams.
+
+
+.. tabularcolumns:: |p{3.8cm}|p{5.6cm}|p{8.1cm}|
+
+.. c:type:: v4l2_enc_idx
+
+.. flat-table:: struct v4l2_enc_idx
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 3 8
+
+    * - __u32
+      - ``entries``
+      - The number of entries the driver stored in the ``entry`` array.
+    * - __u32
+      - ``entries_cap``
+      - The number of entries the driver can buffer. Must be greater than
+	zero.
+    * - __u32
+      - ``reserved``\ [4]
+      - Reserved for future extensions. Drivers must set the
+	array to zero.
+    * - struct :c:type:`v4l2_enc_idx_entry`
+      - ``entry``\ [``V4L2_ENC_IDX_ENTRIES``]
+      - Meta data about a compressed video stream. Each element of the
+	array corresponds to one picture, sorted in ascending order by
+	their ``offset``.
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_enc_idx_entry
+
+.. flat-table:: struct v4l2_enc_idx_entry
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u64
+      - ``offset``
+      - The offset in bytes from the beginning of the compressed video
+	stream to the beginning of this picture, that is a *PES packet
+	header* as defined in :ref:`mpeg2part1` or a *picture header* as
+	defined in :ref:`mpeg2part2`. When the encoder is stopped, the
+	driver resets the offset to zero.
+    * - __u64
+      - ``pts``
+      - The 33 bit *Presentation Time Stamp* of this picture as defined in
+	:ref:`mpeg2part1`.
+    * - __u32
+      - ``length``
+      - The length of this picture in bytes.
+    * - __u32
+      - ``flags``
+      - Flags containing the coding type of this picture, see
+	:ref:`enc-idx-flags`.
+    * - __u32
+      - ``reserved``\ [2]
+      - Reserved for future extensions. Drivers must set the array to
+	zero.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _enc-idx-flags:
+
+.. flat-table:: Index Entry Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_ENC_IDX_FRAME_I``
+      - 0x00
+      - This is an Intra-coded picture.
+    * - ``V4L2_ENC_IDX_FRAME_P``
+      - 0x01
+      - This is a Predictive-coded picture.
+    * - ``V4L2_ENC_IDX_FRAME_B``
+      - 0x02
+      - This is a Bidirectionally predictive-coded picture.
+    * - ``V4L2_ENC_IDX_FRAME_MASK``
+      - 0x0F
+      - *AND* the flags field with this mask to obtain the picture coding
+	type.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
new file mode 100644
index 000000000000..add17c9204cb
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
@@ -0,0 +1,416 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_EXT_CTRLS:
+
+******************************************************************
+ioctl VIDIOC_G_EXT_CTRLS, VIDIOC_S_EXT_CTRLS, VIDIOC_TRY_EXT_CTRLS
+******************************************************************
+
+Name
+====
+
+VIDIOC_G_EXT_CTRLS - VIDIOC_S_EXT_CTRLS - VIDIOC_TRY_EXT_CTRLS - Get or set the value of several controls, try control values
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_EXT_CTRLS, struct v4l2_ext_controls *argp )
+    :name: VIDIOC_G_EXT_CTRLS
+
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_EXT_CTRLS, struct v4l2_ext_controls *argp )
+    :name: VIDIOC_S_EXT_CTRLS
+
+
+.. c:function:: int ioctl( int fd, VIDIOC_TRY_EXT_CTRLS, struct v4l2_ext_controls *argp )
+    :name: VIDIOC_TRY_EXT_CTRLS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_ext_controls`.
+
+
+Description
+===========
+
+These ioctls allow the caller to get or set multiple controls
+atomically. Control IDs are grouped into control classes (see
+:ref:`ctrl-class`) and all controls in the control array must belong
+to the same control class.
+
+Applications must always fill in the ``count``, ``which``, ``controls``
+and ``reserved`` fields of struct
+:c:type:`v4l2_ext_controls`, and initialize the
+struct :c:type:`v4l2_ext_control` array pointed to
+by the ``controls`` fields.
+
+To get the current value of a set of controls applications initialize
+the ``id``, ``size`` and ``reserved2`` fields of each struct
+:c:type:`v4l2_ext_control` and call the
+:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctl. String controls controls must also set the
+``string`` field. Controls of compound types
+(``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is set) must set the ``ptr`` field.
+
+If the ``size`` is too small to receive the control result (only
+relevant for pointer-type controls like strings), then the driver will
+set ``size`` to a valid value and return an ``ENOSPC`` error code. You
+should re-allocate the memory to this new size and try again. For the
+string type it is possible that the same issue occurs again if the
+string has grown in the meantime. It is recommended to call
+:ref:`VIDIOC_QUERYCTRL` first and use
+``maximum``\ +1 as the new ``size`` value. It is guaranteed that that is
+sufficient memory.
+
+N-dimensional arrays are set and retrieved row-by-row. You cannot set a
+partial array, all elements have to be set or retrieved. The total size
+is calculated as ``elems`` * ``elem_size``. These values can be obtained
+by calling :ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>`.
+
+To change the value of a set of controls applications initialize the
+``id``, ``size``, ``reserved2`` and ``value/value64/string/ptr`` fields
+of each struct :c:type:`v4l2_ext_control` and call
+the :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctl. The controls will only be set if *all*
+control values are valid.
+
+To check if a set of controls have correct values applications
+initialize the ``id``, ``size``, ``reserved2`` and
+``value/value64/string/ptr`` fields of each struct
+:c:type:`v4l2_ext_control` and call the
+:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctl. It is up to the driver whether wrong
+values are automatically adjusted to a valid value or if an error is
+returned.
+
+When the ``id`` or ``which`` is invalid drivers return an ``EINVAL`` error
+code. When the value is out of bounds drivers can choose to take the
+closest valid value or return an ``ERANGE`` error code, whatever seems more
+appropriate. In the first case the new value is set in struct
+:c:type:`v4l2_ext_control`. If the new control value
+is inappropriate (e.g. the given menu index is not supported by the menu
+control), then this will also result in an ``EINVAL`` error code error.
+
+If ``request_fd`` is set to a not-yet-queued :ref:`request <media-request-api>`
+file descriptor and ``which`` is set to ``V4L2_CTRL_WHICH_REQUEST_VAL``,
+then the controls are not applied immediately when calling
+:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, but instead are applied by
+the driver for the buffer associated with the same request.
+If the device does not support requests, then ``EACCES`` will be returned.
+If requests are supported but an invalid request file descriptor is given,
+then ``EINVAL`` will be returned.
+
+An attempt to call :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` for a
+request that has already been queued will result in an ``EBUSY`` error.
+
+If ``request_fd`` is specified and ``which`` is set to
+``V4L2_CTRL_WHICH_REQUEST_VAL`` during a call to
+:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, then it will return the
+values of the controls at the time of request completion.
+If the request is not yet completed, then this will result in an
+``EACCES`` error.
+
+The driver will only set/get these controls if all control values are
+correct. This prevents the situation where only some of the controls
+were set/get. Only low-level errors (e. g. a failed i2c command) can
+still cause this situation.
+
+
+.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{1.5cm}|p{11.8cm}|
+
+.. c:type:: v4l2_ext_control
+
+.. cssclass: longtable
+
+.. flat-table:: struct v4l2_ext_control
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``id``
+      - Identifies the control, set by the application.
+    * - __u32
+      - ``size``
+      - The total size in bytes of the payload of this control. This is
+	normally 0, but for pointer controls this should be set to the
+	size of the memory containing the payload, or that will receive
+	the payload. If :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` finds that this value is
+	less than is required to store the payload result, then it is set
+	to a value large enough to store the payload result and ``ENOSPC`` is
+	returned.
+
+	.. note::
+
+	   For string controls, this ``size`` field should
+	   not be confused with the length of the string. This field refers
+	   to the size of the memory that contains the string. The actual
+	   *length* of the string may well be much smaller.
+    * - __u32
+      - ``reserved2``\ [1]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+    * - union {
+      - (anonymous)
+    * - __s32
+      - ``value``
+      - New value or current value. Valid if this control is not of type
+	``V4L2_CTRL_TYPE_INTEGER64`` and ``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is
+	not set.
+    * - __s64
+      - ``value64``
+      - New value or current value. Valid if this control is of type
+	``V4L2_CTRL_TYPE_INTEGER64`` and ``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is
+	not set.
+    * - char *
+      - ``string``
+      - A pointer to a string. Valid if this control is of type
+	``V4L2_CTRL_TYPE_STRING``.
+    * - __u8 *
+      - ``p_u8``
+      - A pointer to a matrix control of unsigned 8-bit values. Valid if
+	this control is of type ``V4L2_CTRL_TYPE_U8``.
+    * - __u16 *
+      - ``p_u16``
+      - A pointer to a matrix control of unsigned 16-bit values. Valid if
+	this control is of type ``V4L2_CTRL_TYPE_U16``.
+    * - __u32 *
+      - ``p_u32``
+      - A pointer to a matrix control of unsigned 32-bit values. Valid if
+	this control is of type ``V4L2_CTRL_TYPE_U32``.
+    * - :c:type:`v4l2_area` *
+      - ``p_area``
+      - A pointer to a struct :c:type:`v4l2_area`. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_AREA``.
+    * - void *
+      - ``ptr``
+      - A pointer to a compound type which can be an N-dimensional array
+	and/or a compound type (the control's type is >=
+	``V4L2_CTRL_COMPOUND_TYPES``). Valid if
+	``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is set for this control.
+    * - }
+      -
+
+
+.. tabularcolumns:: |p{4.0cm}|p{2.2cm}|p{2.1cm}|p{8.2cm}|
+
+.. c:type:: v4l2_ext_controls
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ext_controls
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - union {
+      - (anonymous)
+    * - __u32
+      - ``ctrl_class``
+      - The control class to which all controls belong, see
+	:ref:`ctrl-class`. Drivers that use a kernel framework for
+	handling controls will also accept a value of 0 here, meaning that
+	the controls can belong to any control class. Whether drivers
+	support this can be tested by setting ``ctrl_class`` to 0 and
+	calling :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` with a ``count`` of 0. If that
+	succeeds, then the driver supports this feature.
+    * - __u32
+      - ``which``
+      - Which value of the control to get/set/try.
+	``V4L2_CTRL_WHICH_CUR_VAL`` will return the current value of the
+	control, ``V4L2_CTRL_WHICH_DEF_VAL`` will return the default
+	value of the control and ``V4L2_CTRL_WHICH_REQUEST_VAL`` indicates that
+	these controls have to be retrieved from a request or tried/set for
+	a request. In the latter case the ``request_fd`` field contains the
+	file descriptor of the request that should be used. If the device
+	does not support requests, then ``EACCES`` will be returned.
+
+	.. note::
+
+	   When using ``V4L2_CTRL_WHICH_DEF_VAL`` be aware that you can only
+	   get the default value of the control, you cannot set or try it.
+
+	For backwards compatibility you can also use a control class here
+	(see :ref:`ctrl-class`). In that case all controls have to
+	belong to that control class. This usage is deprecated, instead
+	just use ``V4L2_CTRL_WHICH_CUR_VAL``. There are some very old
+	drivers that do not yet support ``V4L2_CTRL_WHICH_CUR_VAL`` and
+	that require a control class here. You can test for such drivers
+	by setting ctrl_class to ``V4L2_CTRL_WHICH_CUR_VAL`` and calling
+	VIDIOC_TRY_EXT_CTRLS with a count of 0. If that fails, then the
+	driver does not support ``V4L2_CTRL_WHICH_CUR_VAL``.
+    * - }
+      -
+    * - __u32
+      - ``count``
+      - The number of controls in the controls array. May also be zero.
+    * - __u32
+      - ``error_idx``
+      - Set by the driver in case of an error. If the error is associated
+	with a particular control, then ``error_idx`` is set to the index
+	of that control. If the error is not related to a specific
+	control, or the validation step failed (see below), then
+	``error_idx`` is set to ``count``. The value is undefined if the
+	ioctl returned 0 (success).
+
+	Before controls are read from/written to hardware a validation
+	step takes place: this checks if all controls in the list are
+	valid controls, if no attempt is made to write to a read-only
+	control or read from a write-only control, and any other up-front
+	checks that can be done without accessing the hardware. The exact
+	validations done during this step are driver dependent since some
+	checks might require hardware access for some devices, thus making
+	it impossible to do those checks up-front. However, drivers should
+	make a best-effort to do as many up-front checks as possible.
+
+	This check is done to avoid leaving the hardware in an
+	inconsistent state due to easy-to-avoid problems. But it leads to
+	another problem: the application needs to know whether an error
+	came from the validation step (meaning that the hardware was not
+	touched) or from an error during the actual reading from/writing
+	to hardware.
+
+	The, in hindsight quite poor, solution for that is to set
+	``error_idx`` to ``count`` if the validation failed. This has the
+	unfortunate side-effect that it is not possible to see which
+	control failed the validation. If the validation was successful
+	and the error happened while accessing the hardware, then
+	``error_idx`` is less than ``count`` and only the controls up to
+	``error_idx-1`` were read or written correctly, and the state of
+	the remaining controls is undefined.
+
+	Since :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` does not access hardware there is
+	also no need to handle the validation step in this special way, so
+	``error_idx`` will just be set to the control that failed the
+	validation step instead of to ``count``. This means that if
+	:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` fails with ``error_idx`` set to ``count``,
+	then you can call :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` to try to discover the
+	actual control that failed the validation step. Unfortunately,
+	there is no ``TRY`` equivalent for :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`.
+    * - __s32
+      - ``request_fd``
+      - File descriptor of the request to be used by this operation. Only
+	valid if ``which`` is set to ``V4L2_CTRL_WHICH_REQUEST_VAL``.
+	If the device does not support requests, then ``EACCES`` will be returned.
+	If requests are supported but an invalid request file descriptor is
+	given, then ``EINVAL`` will be returned.
+    * - __u32
+      - ``reserved``\ [1]
+      - Reserved for future extensions.
+
+	Drivers and applications must set the array to zero.
+    * - struct :c:type:`v4l2_ext_control` *
+      - ``controls``
+      - Pointer to an array of ``count`` v4l2_ext_control structures.
+
+	Ignored if ``count`` equals zero.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _ctrl-class:
+
+.. flat-table:: Control classes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_CTRL_CLASS_USER``
+      - 0x980000
+      - The class containing user controls. These controls are described
+	in :ref:`control`. All controls that can be set using the
+	:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` and
+	:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` ioctl belong to this
+	class.
+    * - ``V4L2_CTRL_CLASS_MPEG``
+      - 0x990000
+      - The class containing MPEG compression controls. These controls are
+	described in :ref:`mpeg-controls`.
+    * - ``V4L2_CTRL_CLASS_CAMERA``
+      - 0x9a0000
+      - The class containing camera controls. These controls are described
+	in :ref:`camera-controls`.
+    * - ``V4L2_CTRL_CLASS_FM_TX``
+      - 0x9b0000
+      - The class containing FM Transmitter (FM TX) controls. These
+	controls are described in :ref:`fm-tx-controls`.
+    * - ``V4L2_CTRL_CLASS_FLASH``
+      - 0x9c0000
+      - The class containing flash device controls. These controls are
+	described in :ref:`flash-controls`.
+    * - ``V4L2_CTRL_CLASS_JPEG``
+      - 0x9d0000
+      - The class containing JPEG compression controls. These controls are
+	described in :ref:`jpeg-controls`.
+    * - ``V4L2_CTRL_CLASS_IMAGE_SOURCE``
+      - 0x9e0000
+      - The class containing image source controls. These controls are
+	described in :ref:`image-source-controls`.
+    * - ``V4L2_CTRL_CLASS_IMAGE_PROC``
+      - 0x9f0000
+      - The class containing image processing controls. These controls are
+	described in :ref:`image-process-controls`.
+    * - ``V4L2_CTRL_CLASS_FM_RX``
+      - 0xa10000
+      - The class containing FM Receiver (FM RX) controls. These controls
+	are described in :ref:`fm-rx-controls`.
+    * - ``V4L2_CTRL_CLASS_RF_TUNER``
+      - 0xa20000
+      - The class containing RF tuner controls. These controls are
+	described in :ref:`rf-tuner-controls`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_ext_control` ``id`` is
+    invalid, or the struct :c:type:`v4l2_ext_controls`
+    ``which`` is invalid, or the struct
+    :c:type:`v4l2_ext_control` ``value`` was
+    inappropriate (e.g. the given menu index is not supported by the
+    driver), or the ``which`` field was set to ``V4L2_CTRL_WHICH_REQUEST_VAL``
+    but the given ``request_fd`` was invalid or ``V4L2_CTRL_WHICH_REQUEST_VAL``
+    is not supported by the kernel.
+    This error code is also returned by the
+    :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctls if two or
+    more control values are in conflict.
+
+ERANGE
+    The struct :c:type:`v4l2_ext_control` ``value``
+    is out of bounds.
+
+EBUSY
+    The control is temporarily not changeable, possibly because another
+    applications took over control of the device function this control
+    belongs to, or (if the ``which`` field was set to
+    ``V4L2_CTRL_WHICH_REQUEST_VAL``) the request was queued but not yet
+    completed.
+
+ENOSPC
+    The space reserved for the control's payload is insufficient. The
+    field ``size`` is set to a value that is enough to store the payload
+    and this error code is returned.
+
+EACCES
+    Attempt to try or set a read-only control, or to get a write-only
+    control, or to get a control from a request that has not yet been
+    completed.
+
+    Or the ``which`` field was set to ``V4L2_CTRL_WHICH_REQUEST_VAL`` but the
+    device does not support requests.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst
new file mode 100644
index 000000000000..0124444419ae
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst
@@ -0,0 +1,362 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_FBUF:
+
+**********************************
+ioctl VIDIOC_G_FBUF, VIDIOC_S_FBUF
+**********************************
+
+Name
+====
+
+VIDIOC_G_FBUF - VIDIOC_S_FBUF - Get or set frame buffer overlay parameters
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_FBUF, struct v4l2_framebuffer *argp )
+    :name: VIDIOC_G_FBUF
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_FBUF, const struct v4l2_framebuffer *argp )
+    :name: VIDIOC_S_FBUF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_framebuffer`.
+
+
+Description
+===========
+
+Applications can use the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` and :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctl
+to get and set the framebuffer parameters for a
+:ref:`Video Overlay <overlay>` or :ref:`Video Output Overlay <osd>`
+(OSD). The type of overlay is implied by the device type (capture or
+output device) and can be determined with the
+:ref:`VIDIOC_QUERYCAP` ioctl. One ``/dev/videoN``
+device must not support both kinds of overlay.
+
+The V4L2 API distinguishes destructive and non-destructive overlays. A
+destructive overlay copies captured video images into the video memory
+of a graphics card. A non-destructive overlay blends video images into a
+VGA signal or graphics into a video signal. *Video Output Overlays* are
+always non-destructive.
+
+To get the current parameters applications call the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`
+ioctl with a pointer to a struct :c:type:`v4l2_framebuffer`
+structure. The driver fills all fields of the structure or returns an
+EINVAL error code when overlays are not supported.
+
+To set the parameters for a *Video Output Overlay*, applications must
+initialize the ``flags`` field of a struct
+:c:type:`v4l2_framebuffer`. Since the framebuffer is
+implemented on the TV card all other parameters are determined by the
+driver. When an application calls :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` with a pointer to
+this structure, the driver prepares for the overlay and returns the
+framebuffer parameters as :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` does, or it returns an error
+code.
+
+To set the parameters for a *non-destructive Video Overlay*,
+applications must initialize the ``flags`` field, the ``fmt``
+substructure, and call :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>`. Again the driver prepares for
+the overlay and returns the framebuffer parameters as :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`
+does, or it returns an error code.
+
+For a *destructive Video Overlay* applications must additionally provide
+a ``base`` address. Setting up a DMA to a random memory location can
+jeopardize the system security, its stability or even damage the
+hardware, therefore only the superuser can set the parameters for a
+destructive video overlay.
+
+
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+
+.. c:type:: v4l2_framebuffer
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_framebuffer
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 1 2
+
+    * - __u32
+      - ``capability``
+      -
+      - Overlay capability flags set by the driver, see
+	:ref:`framebuffer-cap`.
+    * - __u32
+      - ``flags``
+      -
+      - Overlay control flags set by application and driver, see
+	:ref:`framebuffer-flags`
+    * - void *
+      - ``base``
+      -
+      - Physical base address of the framebuffer, that is the address of
+	the pixel in the top left corner of the framebuffer. [#f1]_
+    * -
+      -
+      -
+      - This field is irrelevant to *non-destructive Video Overlays*. For
+	*destructive Video Overlays* applications must provide a base
+	address. The driver may accept only base addresses which are a
+	multiple of two, four or eight bytes. For *Video Output Overlays*
+	the driver must return a valid base address, so applications can
+	find the corresponding Linux framebuffer device (see
+	:ref:`osd`).
+    * - struct
+      - ``fmt``
+      -
+      - Layout of the frame buffer.
+    * -
+      - __u32
+      - ``width``
+      - Width of the frame buffer in pixels.
+    * -
+      - __u32
+      - ``height``
+      - Height of the frame buffer in pixels.
+    * -
+      - __u32
+      - ``pixelformat``
+      - The pixel format of the framebuffer.
+    * -
+      -
+      -
+      - For *non-destructive Video Overlays* this field only defines a
+	format for the struct :c:type:`v4l2_window`
+	``chromakey`` field.
+    * -
+      -
+      -
+      - For *destructive Video Overlays* applications must initialize this
+	field. For *Video Output Overlays* the driver must return a valid
+	format.
+    * -
+      -
+      -
+      - Usually this is an RGB format (for example
+	:ref:`V4L2_PIX_FMT_RGB565 <V4L2-PIX-FMT-RGB565>`) but YUV
+	formats (only packed YUV formats when chroma keying is used, not
+	including ``V4L2_PIX_FMT_YUYV`` and ``V4L2_PIX_FMT_UYVY``) and the
+	``V4L2_PIX_FMT_PAL8`` format are also permitted. The behavior of
+	the driver when an application requests a compressed format is
+	undefined. See :ref:`pixfmt` for information on pixel formats.
+    * -
+      - enum :c:type:`v4l2_field`
+      - ``field``
+      - Drivers and applications shall ignore this field. If applicable,
+	the field order is selected with the
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, using the ``field``
+	field of struct :c:type:`v4l2_window`.
+    * -
+      - __u32
+      - ``bytesperline``
+      - Distance in bytes between the leftmost pixels in two adjacent
+	lines.
+    * - :cspan:`3`
+
+	This field is irrelevant to *non-destructive Video Overlays*.
+
+	For *destructive Video Overlays* both applications and drivers can
+	set this field to request padding bytes at the end of each line.
+	Drivers however may ignore the requested value, returning
+	``width`` times bytes-per-pixel or a larger value required by the
+	hardware. That implies applications can just set this field to
+	zero to get a reasonable default.
+
+	For *Video Output Overlays* the driver must return a valid value.
+
+	Video hardware may access padding bytes, therefore they must
+	reside in accessible memory. Consider for example the case where
+	padding bytes after the last line of an image cross a system page
+	boundary. Capture devices may write padding bytes, the value is
+	undefined. Output devices ignore the contents of padding bytes.
+
+	When the image format is planar the ``bytesperline`` value applies
+	to the first plane and is divided by the same factor as the
+	``width`` field for the other planes. For example the Cb and Cr
+	planes of a YUV 4:2:0 image have half as many padding bytes
+	following each line as the Y plane. To avoid ambiguities drivers
+	must return a ``bytesperline`` value rounded up to a multiple of
+	the scale factor.
+    * -
+      - __u32
+      - ``sizeimage``
+      - This field is irrelevant to *non-destructive Video Overlays*. For
+	*destructive Video Overlays* applications must initialize this
+	field. For *Video Output Overlays* the driver must return a valid
+	format.
+
+	Together with ``base`` it defines the framebuffer memory
+	accessible by the driver.
+    * -
+      - enum :c:type:`v4l2_colorspace`
+      - ``colorspace``
+      - This information supplements the ``pixelformat`` and must be set
+	by the driver, see :ref:`colorspaces`.
+    * -
+      - __u32
+      - ``priv``
+      - Reserved. Drivers and applications must set this field to zero.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _framebuffer-cap:
+
+.. flat-table:: Frame Buffer Capability Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_FBUF_CAP_EXTERNOVERLAY``
+      - 0x0001
+      - The device is capable of non-destructive overlays. When the driver
+	clears this flag, only destructive overlays are supported. There
+	are no drivers yet which support both destructive and
+	non-destructive overlays. Video Output Overlays are in practice
+	always non-destructive.
+    * - ``V4L2_FBUF_CAP_CHROMAKEY``
+      - 0x0002
+      - The device supports clipping by chroma-keying the images. That is,
+	image pixels replace pixels in the VGA or video signal only where
+	the latter assume a certain color. Chroma-keying makes no sense
+	for destructive overlays.
+    * - ``V4L2_FBUF_CAP_LIST_CLIPPING``
+      - 0x0004
+      - The device supports clipping using a list of clip rectangles.
+    * - ``V4L2_FBUF_CAP_BITMAP_CLIPPING``
+      - 0x0008
+      - The device supports clipping using a bit mask.
+    * - ``V4L2_FBUF_CAP_LOCAL_ALPHA``
+      - 0x0010
+      - The device supports clipping/blending using the alpha channel of
+	the framebuffer or VGA signal. Alpha blending makes no sense for
+	destructive overlays.
+    * - ``V4L2_FBUF_CAP_GLOBAL_ALPHA``
+      - 0x0020
+      - The device supports alpha blending using a global alpha value.
+	Alpha blending makes no sense for destructive overlays.
+    * - ``V4L2_FBUF_CAP_LOCAL_INV_ALPHA``
+      - 0x0040
+      - The device supports clipping/blending using the inverted alpha
+	channel of the framebuffer or VGA signal. Alpha blending makes no
+	sense for destructive overlays.
+    * - ``V4L2_FBUF_CAP_SRC_CHROMAKEY``
+      - 0x0080
+      - The device supports Source Chroma-keying. Video pixels with the
+	chroma-key colors are replaced by framebuffer pixels, which is
+	exactly opposite of ``V4L2_FBUF_CAP_CHROMAKEY``
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _framebuffer-flags:
+
+.. cssclass:: longtable
+
+.. flat-table:: Frame Buffer Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_FBUF_FLAG_PRIMARY``
+      - 0x0001
+      - The framebuffer is the primary graphics surface. In other words,
+	the overlay is destructive. This flag is typically set by any
+	driver that doesn't have the ``V4L2_FBUF_CAP_EXTERNOVERLAY``
+	capability and it is cleared otherwise.
+    * - ``V4L2_FBUF_FLAG_OVERLAY``
+      - 0x0002
+      - If this flag is set for a video capture device, then the driver
+	will set the initial overlay size to cover the full framebuffer
+	size, otherwise the existing overlay size (as set by
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`) will be used. Only one
+	video capture driver (bttv) supports this flag. The use of this
+	flag for capture devices is deprecated. There is no way to detect
+	which drivers support this flag, so the only reliable method of
+	setting the overlay size is through
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`. If this flag is set for a
+	video output device, then the video output overlay window is
+	relative to the top-left corner of the framebuffer and restricted
+	to the size of the framebuffer. If it is cleared, then the video
+	output overlay window is relative to the video output display.
+    * - ``V4L2_FBUF_FLAG_CHROMAKEY``
+      - 0x0004
+      - Use chroma-keying. The chroma-key color is determined by the
+	``chromakey`` field of struct :c:type:`v4l2_window`
+	and negotiated with the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
+	ioctl, see :ref:`overlay` and :ref:`osd`.
+    * - :cspan:`2` There are no flags to enable clipping using a list of
+	clip rectangles or a bitmap. These methods are negotiated with the
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, see :ref:`overlay`
+	and :ref:`osd`.
+    * - ``V4L2_FBUF_FLAG_LOCAL_ALPHA``
+      - 0x0008
+      - Use the alpha channel of the framebuffer to clip or blend
+	framebuffer pixels with video images. The blend function is:
+	output = framebuffer pixel * alpha + video pixel * (1 - alpha).
+	The actual alpha depth depends on the framebuffer pixel format.
+    * - ``V4L2_FBUF_FLAG_GLOBAL_ALPHA``
+      - 0x0010
+      - Use a global alpha value to blend the framebuffer with video
+	images. The blend function is: output = (framebuffer pixel * alpha
+	+ video pixel * (255 - alpha)) / 255. The alpha value is
+	determined by the ``global_alpha`` field of struct
+	:c:type:`v4l2_window` and negotiated with the
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, see :ref:`overlay`
+	and :ref:`osd`.
+    * - ``V4L2_FBUF_FLAG_LOCAL_INV_ALPHA``
+      - 0x0020
+      - Like ``V4L2_FBUF_FLAG_LOCAL_ALPHA``, use the alpha channel of the
+	framebuffer to clip or blend framebuffer pixels with video images,
+	but with an inverted alpha value. The blend function is: output =
+	framebuffer pixel * (1 - alpha) + video pixel * alpha. The actual
+	alpha depth depends on the framebuffer pixel format.
+    * - ``V4L2_FBUF_FLAG_SRC_CHROMAKEY``
+      - 0x0040
+      - Use source chroma-keying. The source chroma-key color is
+	determined by the ``chromakey`` field of struct
+	:c:type:`v4l2_window` and negotiated with the
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl, see :ref:`overlay`
+	and :ref:`osd`. Both chroma-keying are mutual exclusive to each
+	other, so same ``chromakey`` field of struct
+	:c:type:`v4l2_window` is being used.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EPERM
+    :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` can only be called by a privileged user to
+    negotiate the parameters for a destructive overlay.
+
+EINVAL
+    The :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` parameters are unsuitable.
+
+.. [#f1]
+   A physical base address may not suit all platforms. GK notes in
+   theory we should pass something like PCI device + memory region +
+   offset instead. If you encounter problems please discuss on the
+   linux-media mailing list:
+   `https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst
new file mode 100644
index 000000000000..88bb69ec07e2
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst
@@ -0,0 +1,161 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_FMT:
+
+************************************************
+ioctl VIDIOC_G_FMT, VIDIOC_S_FMT, VIDIOC_TRY_FMT
+************************************************
+
+Name
+====
+
+VIDIOC_G_FMT - VIDIOC_S_FMT - VIDIOC_TRY_FMT - Get or set the data format, try a format
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_FMT, struct v4l2_format *argp )
+    :name: VIDIOC_G_FMT
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_FMT, struct v4l2_format *argp )
+    :name: VIDIOC_S_FMT
+
+.. c:function:: int ioctl( int fd, VIDIOC_TRY_FMT, struct v4l2_format *argp )
+    :name: VIDIOC_TRY_FMT
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_format`.
+
+
+Description
+===========
+
+These ioctls are used to negotiate the format of data (typically image
+format) exchanged between driver and application.
+
+To query the current parameters applications set the ``type`` field of a
+struct :c:type:`v4l2_format` to the respective buffer (stream)
+type. For example video capture devices use
+``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or
+``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``. When the application calls the
+:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` ioctl with a pointer to this structure the driver fills
+the respective member of the ``fmt`` union. In case of video capture
+devices that is either the struct
+:c:type:`v4l2_pix_format` ``pix`` or the struct
+:c:type:`v4l2_pix_format_mplane` ``pix_mp``
+member. When the requested buffer type is not supported drivers return
+an ``EINVAL`` error code.
+
+To change the current format parameters applications initialize the
+``type`` field and all fields of the respective ``fmt`` union member.
+For details see the documentation of the various devices types in
+:ref:`devices`. Good practice is to query the current parameters
+first, and to modify only those parameters not suitable for the
+application. When the application calls the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl with
+a pointer to a struct :c:type:`v4l2_format` structure the driver
+checks and adjusts the parameters against hardware abilities. Drivers
+should not return an error code unless the ``type`` field is invalid,
+this is a mechanism to fathom device capabilities and to approach
+parameters acceptable for both the application and driver. On success
+the driver may program the hardware, allocate resources and generally
+prepare for data exchange. Finally the :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl returns
+the current format parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does. Very simple,
+inflexible devices may even ignore all input and always return the
+default parameters. However all V4L2 devices exchanging data with the
+application must implement the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
+ioctl. When the requested buffer type is not supported drivers return an
+EINVAL error code on a :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` attempt. When I/O is already in
+progress or the resource is not available for other reasons drivers
+return the ``EBUSY`` error code.
+
+The :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl is equivalent to :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` with one
+exception: it does not change driver state. It can also be called at any
+time, never returning ``EBUSY``. This function is provided to negotiate
+parameters, to learn about hardware limitations, without disabling I/O
+or possibly time consuming hardware preparations. Although strongly
+recommended drivers are not required to implement this ioctl.
+
+The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical to what
+:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` returns for the same input or output.
+
+
+.. c:type:: v4l2_format
+
+.. tabularcolumns::  |p{1.2cm}|p{4.6cm}|p{3.0cm}|p{8.6cm}|
+
+.. flat-table:: struct v4l2_format
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - __u32
+      - ``type``
+      - Type of the data stream, see :c:type:`v4l2_buf_type`.
+    * - union {
+      - ``fmt``
+    * - struct :c:type:`v4l2_pix_format`
+      - ``pix``
+      - Definition of an image format, see :ref:`pixfmt`, used by video
+	capture and output devices.
+    * - struct :c:type:`v4l2_pix_format_mplane`
+      - ``pix_mp``
+      - Definition of an image format, see :ref:`pixfmt`, used by video
+	capture and output devices that support the
+	:ref:`multi-planar version of the API <planar-apis>`.
+    * - struct :c:type:`v4l2_window`
+      - ``win``
+      - Definition of an overlaid image, see :ref:`overlay`, used by
+	video overlay devices.
+    * - struct :c:type:`v4l2_vbi_format`
+      - ``vbi``
+      - Raw VBI capture or output parameters. This is discussed in more
+	detail in :ref:`raw-vbi`. Used by raw VBI capture and output
+	devices.
+    * - struct :c:type:`v4l2_sliced_vbi_format`
+      - ``sliced``
+      - Sliced VBI capture or output parameters. See :ref:`sliced` for
+	details. Used by sliced VBI capture and output devices.
+    * - struct :c:type:`v4l2_sdr_format`
+      - ``sdr``
+      - Definition of a data format, see :ref:`pixfmt`, used by SDR
+	capture and output devices.
+    * - struct :c:type:`v4l2_meta_format`
+      - ``meta``
+      - Definition of a metadata format, see :ref:`meta-formats`, used by
+	metadata capture devices.
+    * - __u8
+      - ``raw_data``\ [200]
+      - Place holder for future extensions.
+    * - }
+      -
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_format` ``type`` field is
+    invalid or the requested buffer type not supported.
+
+EBUSY
+    The device is busy and cannot change the format. This could be
+    because or the device is streaming or buffers are allocated or
+    queued to the driver. Relevant for :ref:`VIDIOC_S_FMT
+    <VIDIOC_G_FMT>` only.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst b/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst
new file mode 100644
index 000000000000..26300e0258a3
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst
@@ -0,0 +1,112 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_FREQUENCY:
+
+********************************************
+ioctl VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY
+********************************************
+
+Name
+====
+
+VIDIOC_G_FREQUENCY - VIDIOC_S_FREQUENCY - Get or set tuner or modulator radio frequency
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_FREQUENCY, struct v4l2_frequency *argp )
+    :name: VIDIOC_G_FREQUENCY
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_FREQUENCY, const struct v4l2_frequency *argp )
+    :name: VIDIOC_S_FREQUENCY
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_frequency`.
+
+
+Description
+===========
+
+To get the current tuner or modulator radio frequency applications set
+the ``tuner`` field of a struct
+:c:type:`v4l2_frequency` to the respective tuner or
+modulator number (only input devices have tuners, only output devices
+have modulators), zero out the ``reserved`` array and call the
+:ref:`VIDIOC_G_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl with a pointer to this structure. The
+driver stores the current frequency in the ``frequency`` field.
+
+To change the current tuner or modulator radio frequency applications
+initialize the ``tuner``, ``type`` and ``frequency`` fields, and the
+``reserved`` array of a struct :c:type:`v4l2_frequency`
+and call the :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl with a pointer to this
+structure. When the requested frequency is not possible the driver
+assumes the closest possible value. However :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` is a
+write-only ioctl, it does not return the actual new frequency.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_frequency
+
+.. flat-table:: struct v4l2_frequency
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``tuner``
+      - The tuner or modulator index number. This is the same value as in
+	the struct :c:type:`v4l2_input` ``tuner`` field and
+	the struct :c:type:`v4l2_tuner` ``index`` field, or
+	the struct :c:type:`v4l2_output` ``modulator`` field
+	and the struct :c:type:`v4l2_modulator` ``index``
+	field.
+    * - __u32
+      - ``type``
+      - The tuner type. This is the same value as in the struct
+	:c:type:`v4l2_tuner` ``type`` field. The type must be
+	set to ``V4L2_TUNER_RADIO`` for ``/dev/radioX`` device nodes, and
+	to ``V4L2_TUNER_ANALOG_TV`` for all others. Set this field to
+	``V4L2_TUNER_RADIO`` for modulators (currently only radio
+	modulators are supported). See :c:type:`v4l2_tuner_type`
+    * - __u32
+      - ``frequency``
+      - Tuning frequency in units of 62.5 kHz, or if the struct
+	:c:type:`v4l2_tuner` or struct
+	:c:type:`v4l2_modulator` ``capability`` flag
+	``V4L2_TUNER_CAP_LOW`` is set, in units of 62.5 Hz. A 1 Hz unit is
+	used when the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is set.
+    * - __u32
+      - ``reserved``\ [8]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The ``tuner`` index is out of bounds or the value in the ``type``
+    field is wrong.
+
+EBUSY
+    A hardware seek is in progress.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-input.rst b/Documentation/userspace-api/media/v4l/vidioc-g-input.rst
new file mode 100644
index 000000000000..294e346678c1
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-input.rst
@@ -0,0 +1,71 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_INPUT:
+
+************************************
+ioctl VIDIOC_G_INPUT, VIDIOC_S_INPUT
+************************************
+
+Name
+====
+
+VIDIOC_G_INPUT - VIDIOC_S_INPUT - Query or select the current video input
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_INPUT, int *argp )
+    :name: VIDIOC_G_INPUT
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_INPUT, int *argp )
+    :name: VIDIOC_S_INPUT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer an integer with input index.
+
+
+Description
+===========
+
+To query the current video input applications call the
+:ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` ioctl with a pointer to an integer where the driver
+stores the number of the input, as in the struct
+:c:type:`v4l2_input` ``index`` field. This ioctl will fail
+only when there are no video inputs, returning ``EINVAL``.
+
+To select a video input applications store the number of the desired
+input in an integer and call the :ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` ioctl with a pointer
+to this integer. Side effects are possible. For example inputs may
+support different video standards, so the driver may implicitly switch
+the current standard. Because of these possible side effects
+applications must select an input before querying or negotiating any
+other parameters.
+
+Information about video inputs is available using the
+:ref:`VIDIOC_ENUMINPUT` ioctl.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The number of the video input is out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst b/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst
new file mode 100644
index 000000000000..3b9981dcb8e0
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst
@@ -0,0 +1,134 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_JPEGCOMP:
+
+******************************************
+ioctl VIDIOC_G_JPEGCOMP, VIDIOC_S_JPEGCOMP
+******************************************
+
+Name
+====
+
+VIDIOC_G_JPEGCOMP - VIDIOC_S_JPEGCOMP
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_JPEGCOMP, v4l2_jpegcompression *argp )
+    :name: VIDIOC_G_JPEGCOMP
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_JPEGCOMP, const v4l2_jpegcompression *argp )
+    :name: VIDIOC_S_JPEGCOMP
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_jpegcompression`.
+
+
+Description
+===========
+
+These ioctls are **deprecated**. New drivers and applications should use
+:ref:`JPEG class controls <jpeg-controls>` for image quality and JPEG
+markers control.
+
+[to do]
+
+Ronald Bultje elaborates:
+
+APP is some application-specific information. The application can set it
+itself, and it'll be stored in the JPEG-encoded fields (eg; interlacing
+information for in an AVI or so). COM is the same, but it's comments,
+like 'encoded by me' or so.
+
+jpeg_markers describes whether the huffman tables, quantization tables
+and the restart interval information (all JPEG-specific stuff) should be
+stored in the JPEG-encoded fields. These define how the JPEG field is
+encoded. If you omit them, applications assume you've used standard
+encoding. You usually do want to add them.
+
+
+.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}|
+
+.. c:type:: v4l2_jpegcompression
+
+.. flat-table:: struct v4l2_jpegcompression
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - int
+      - ``quality``
+      - Deprecated. If
+	:ref:`V4L2_CID_JPEG_COMPRESSION_QUALITY <jpeg-quality-control>`
+	control is exposed by a driver applications should use it instead
+	and ignore this field.
+    * - int
+      - ``APPn``
+      -
+    * - int
+      - ``APP_len``
+      -
+    * - char
+      - ``APP_data``\ [60]
+      -
+    * - int
+      - ``COM_len``
+      -
+    * - char
+      - ``COM_data``\ [60]
+      -
+    * - __u32
+      - ``jpeg_markers``
+      - See :ref:`jpeg-markers`. Deprecated. If
+	:ref:`V4L2_CID_JPEG_ACTIVE_MARKER <jpeg-active-marker-control>`
+	control is exposed by a driver applications should use it instead
+	and ignore this field.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _jpeg-markers:
+
+.. flat-table:: JPEG Markers Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_JPEG_MARKER_DHT``
+      - (1<<3)
+      - Define Huffman Tables
+    * - ``V4L2_JPEG_MARKER_DQT``
+      - (1<<4)
+      - Define Quantization Tables
+    * - ``V4L2_JPEG_MARKER_DRI``
+      - (1<<5)
+      - Define Restart Interval
+    * - ``V4L2_JPEG_MARKER_COM``
+      - (1<<6)
+      - Comment segment
+    * - ``V4L2_JPEG_MARKER_APP``
+      - (1<<7)
+      - App segment, driver will always use APP0
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst
new file mode 100644
index 000000000000..c2072f6e8756
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst
@@ -0,0 +1,202 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_MODULATOR:
+
+********************************************
+ioctl VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR
+********************************************
+
+Name
+====
+
+VIDIOC_G_MODULATOR - VIDIOC_S_MODULATOR - Get or set modulator attributes
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_MODULATOR, struct v4l2_modulator *argp )
+    :name: VIDIOC_G_MODULATOR
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_MODULATOR, const struct v4l2_modulator *argp )
+    :name: VIDIOC_S_MODULATOR
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_modulator`.
+
+
+Description
+===========
+
+To query the attributes of a modulator applications initialize the
+``index`` field and zero out the ``reserved`` array of a struct
+:c:type:`v4l2_modulator` and call the
+:ref:`VIDIOC_G_MODULATOR <VIDIOC_G_MODULATOR>` ioctl with a pointer to this structure. Drivers
+fill the rest of the structure or return an ``EINVAL`` error code when the
+index is out of bounds. To enumerate all modulators applications shall
+begin at index zero, incrementing by one until the driver returns
+EINVAL.
+
+Modulators have two writable properties, an audio modulation set and the
+radio frequency. To change the modulated audio subprograms, applications
+initialize the ``index`` and ``txsubchans`` fields and the ``reserved``
+array and call the :ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl. Drivers may choose a
+different audio modulation if the request cannot be satisfied. However
+this is a write-only ioctl, it does not return the actual audio
+modulation selected.
+
+:ref:`SDR <sdr>` specific modulator types are ``V4L2_TUNER_SDR`` and
+``V4L2_TUNER_RF``. For SDR devices ``txsubchans`` field must be
+initialized to zero. The term 'modulator' means SDR transmitter in this
+context.
+
+To change the radio frequency the
+:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available.
+
+
+.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}|
+
+.. c:type:: v4l2_modulator
+
+.. flat-table:: struct v4l2_modulator
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2 1 1
+
+    * - __u32
+      - ``index``
+      - Identifies the modulator, set by the application.
+    * - __u8
+      - ``name``\ [32]
+      - Name of the modulator, a NUL-terminated ASCII string.
+
+	This information is intended for the user.
+    * - __u32
+      - ``capability``
+      - Modulator capability flags. No flags are defined for this field,
+	the tuner flags in struct :c:type:`v4l2_tuner` are
+	used accordingly. The audio flags indicate the ability to encode
+	audio subprograms. They will *not* change for example with the
+	current video standard.
+    * - __u32
+      - ``rangelow``
+      - The lowest tunable frequency in units of 62.5 KHz, or if the
+	``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units of
+	62.5 Hz, or if the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is
+	set, in units of 1 Hz.
+    * - __u32
+      - ``rangehigh``
+      - The highest tunable frequency in units of 62.5 KHz, or if the
+	``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units of
+	62.5 Hz, or if the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is
+	set, in units of 1 Hz.
+    * - __u32
+      - ``txsubchans``
+      - With this field applications can determine how audio sub-carriers
+	shall be modulated. It contains a set of flags as defined in
+	:ref:`modulator-txsubchans`.
+
+	.. note::
+
+	   The tuner ``rxsubchans`` flags  are reused, but the
+	   semantics are different. Video output devices
+	   are assumed to have an analog or PCM audio input with 1-3
+	   channels. The ``txsubchans`` flags select one or more channels
+	   for modulation, together with some audio subprogram indicator,
+	   for example, a stereo pilot tone.
+    * - __u32
+      - ``type``
+      - :cspan:`2` Type of the modulator, see :c:type:`v4l2_tuner_type`.
+    * - __u32
+      - ``reserved``\ [3]
+      - Reserved for future extensions.
+
+	Drivers and applications must set the array to zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _modulator-txsubchans:
+
+.. flat-table:: Modulator Audio Transmission Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_TUNER_SUB_MONO``
+      - 0x0001
+      - Modulate channel 1 as mono audio, when the input has more
+	channels, a down-mix of channel 1 and 2. This flag does not
+	combine with ``V4L2_TUNER_SUB_STEREO`` or
+	``V4L2_TUNER_SUB_LANG1``.
+    * - ``V4L2_TUNER_SUB_STEREO``
+      - 0x0002
+      - Modulate channel 1 and 2 as left and right channel of a stereo
+	audio signal. When the input has only one channel or two channels
+	and ``V4L2_TUNER_SUB_SAP`` is also set, channel 1 is encoded as
+	left and right channel. This flag does not combine with
+	``V4L2_TUNER_SUB_MONO`` or ``V4L2_TUNER_SUB_LANG1``. When the
+	driver does not support stereo audio it shall fall back to mono.
+    * - ``V4L2_TUNER_SUB_LANG1``
+      - 0x0008
+      - Modulate channel 1 and 2 as primary and secondary language of a
+	bilingual audio signal. When the input has only one channel it is
+	used for both languages. It is not possible to encode the primary
+	or secondary language only. This flag does not combine with
+	``V4L2_TUNER_SUB_MONO``, ``V4L2_TUNER_SUB_STEREO`` or
+	``V4L2_TUNER_SUB_SAP``. If the hardware does not support the
+	respective audio matrix, or the current video standard does not
+	permit bilingual audio the :ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl shall
+	return an ``EINVAL`` error code and the driver shall fall back to mono
+	or stereo mode.
+    * - ``V4L2_TUNER_SUB_LANG2``
+      - 0x0004
+      - Same effect as ``V4L2_TUNER_SUB_SAP``.
+    * - ``V4L2_TUNER_SUB_SAP``
+      - 0x0004
+      - When combined with ``V4L2_TUNER_SUB_MONO`` the first channel is
+	encoded as mono audio, the last channel as Second Audio Program.
+	When the input has only one channel it is used for both audio
+	tracks. When the input has three channels the mono track is a
+	down-mix of channel 1 and 2. When combined with
+	``V4L2_TUNER_SUB_STEREO`` channel 1 and 2 are encoded as left and
+	right stereo audio, channel 3 as Second Audio Program. When the
+	input has only two channels, the first is encoded as left and
+	right channel and the second as SAP. When the input has only one
+	channel it is used for all audio tracks. It is not possible to
+	encode a Second Audio Program only. This flag must combine with
+	``V4L2_TUNER_SUB_MONO`` or ``V4L2_TUNER_SUB_STEREO``. If the
+	hardware does not support the respective audio matrix, or the
+	current video standard does not permit SAP the
+	:ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl shall return an ``EINVAL`` error code and
+	driver shall fall back to mono or stereo mode.
+    * - ``V4L2_TUNER_SUB_RDS``
+      - 0x0010
+      - Enable the RDS encoder for a radio FM transmitter.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_modulator` ``index`` is
+    out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-output.rst b/Documentation/userspace-api/media/v4l/vidioc-g-output.rst
new file mode 100644
index 000000000000..cad477420fd7
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-output.rst
@@ -0,0 +1,73 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_OUTPUT:
+
+**************************************
+ioctl VIDIOC_G_OUTPUT, VIDIOC_S_OUTPUT
+**************************************
+
+Name
+====
+
+VIDIOC_G_OUTPUT - VIDIOC_S_OUTPUT - Query or select the current video output
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_OUTPUT, int *argp )
+    :name: VIDIOC_G_OUTPUT
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_OUTPUT, int *argp )
+    :name: VIDIOC_S_OUTPUT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to an integer with output index.
+
+
+Description
+===========
+
+To query the current video output applications call the
+:ref:`VIDIOC_G_OUTPUT <VIDIOC_G_OUTPUT>` ioctl with a pointer to an integer where the driver
+stores the number of the output, as in the struct
+:c:type:`v4l2_output` ``index`` field. This ioctl will
+fail only when there are no video outputs, returning the ``EINVAL`` error
+code.
+
+To select a video output applications store the number of the desired
+output in an integer and call the :ref:`VIDIOC_S_OUTPUT <VIDIOC_G_OUTPUT>` ioctl with a
+pointer to this integer. Side effects are possible. For example outputs
+may support different video standards, so the driver may implicitly
+switch the current standard. standard. Because of these possible side
+effects applications must select an output before querying or
+negotiating any other parameters.
+
+Information about video outputs is available using the
+:ref:`VIDIOC_ENUMOUTPUT` ioctl.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The number of the video output is out of bounds, or there are no
+    video outputs at all.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst
new file mode 100644
index 000000000000..42e9f6ee7a59
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst
@@ -0,0 +1,270 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_PARM:
+
+**********************************
+ioctl VIDIOC_G_PARM, VIDIOC_S_PARM
+**********************************
+
+Name
+====
+
+VIDIOC_G_PARM - VIDIOC_S_PARM - Get or set streaming parameters
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_PARM, v4l2_streamparm *argp )
+    :name: VIDIOC_G_PARM
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_PARM, v4l2_streamparm *argp )
+    :name: VIDIOC_S_PARM
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_streamparm`.
+
+
+Description
+===========
+
+The current video standard determines a nominal number of frames per
+second. If less than this number of frames is to be captured or output,
+applications can request frame skipping or duplicating on the driver
+side. This is especially useful when using the :ref:`read() <func-read>` or
+:ref:`write() <func-write>`, which are not augmented by timestamps or sequence
+counters, and to avoid unnecessary data copying.
+
+Changing the frame interval shall never change the format. Changing the
+format, on the other hand, may change the frame interval.
+
+Further these ioctls can be used to determine the number of buffers used
+internally by a driver in read/write mode. For implications see the
+section discussing the :ref:`read() <func-read>` function.
+
+To get and set the streaming parameters applications call the
+:ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and :ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` ioctl, respectively. They take a
+pointer to a struct :c:type:`v4l2_streamparm` which contains a
+union holding separate parameters for input and output devices.
+
+
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+
+.. c:type:: v4l2_streamparm
+
+.. flat-table:: struct v4l2_streamparm
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - The buffer (stream) type, same as struct
+	:c:type:`v4l2_format` ``type``, set by the
+	application. See :c:type:`v4l2_buf_type`.
+    * - union {
+      - ``parm``
+    * - struct :c:type:`v4l2_captureparm`
+      - ``capture``
+      - Parameters for capture devices, used when ``type`` is
+	``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or
+	``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``.
+    * - struct :c:type:`v4l2_outputparm`
+      - ``output``
+      - Parameters for output devices, used when ``type`` is
+	``V4L2_BUF_TYPE_VIDEO_OUTPUT`` or ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``.
+    * - __u8
+      - ``raw_data``\ [200]
+      - A place holder for future extensions.
+    * - }
+      -
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_captureparm
+
+.. flat-table:: struct v4l2_captureparm
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``capability``
+      - See :ref:`parm-caps`.
+    * - __u32
+      - ``capturemode``
+      - Set by drivers and applications, see :ref:`parm-flags`.
+    * - struct :c:type:`v4l2_fract`
+      - ``timeperframe``
+      - This is the desired period between successive frames captured by
+	the driver, in seconds. The field is intended to skip frames on
+	the driver side, saving I/O bandwidth.
+
+	Applications store here the desired frame period, drivers return
+	the actual frame period, which must be greater or equal to the
+	nominal frame period determined by the current video standard
+	(struct :c:type:`v4l2_standard` ``frameperiod``
+	field). Changing the video standard (also implicitly by switching
+	the video input) may reset this parameter to the nominal frame
+	period. To reset manually applications can just set this field to
+	zero.
+
+	Drivers support this function only when they set the
+	``V4L2_CAP_TIMEPERFRAME`` flag in the ``capability`` field.
+    * - __u32
+      - ``extendedmode``
+      - Custom (driver specific) streaming parameters. When unused,
+	applications and drivers must set this field to zero. Applications
+	using this field should check the driver name and version, see
+	:ref:`querycap`.
+    * - __u32
+      - ``readbuffers``
+      - Applications set this field to the desired number of buffers used
+	internally by the driver in :ref:`read() <func-read>` mode.
+	Drivers return the actual number of buffers. When an application
+	requests zero buffers, drivers should just return the current
+	setting rather than the minimum or an error code. For details see
+	:ref:`rw`.
+    * - __u32
+      - ``reserved``\ [4]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_outputparm
+
+.. flat-table:: struct v4l2_outputparm
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``capability``
+      - See :ref:`parm-caps`.
+    * - __u32
+      - ``outputmode``
+      - Set by drivers and applications, see :ref:`parm-flags`.
+    * - struct :c:type:`v4l2_fract`
+      - ``timeperframe``
+      - This is the desired period between successive frames output by the
+	driver, in seconds.
+    * - :cspan:`2`
+
+	The field is intended to repeat frames on the driver side in
+	:ref:`write() <func-write>` mode (in streaming mode timestamps
+	can be used to throttle the output), saving I/O bandwidth.
+
+	Applications store here the desired frame period, drivers return
+	the actual frame period, which must be greater or equal to the
+	nominal frame period determined by the current video standard
+	(struct :c:type:`v4l2_standard` ``frameperiod``
+	field). Changing the video standard (also implicitly by switching
+	the video output) may reset this parameter to the nominal frame
+	period. To reset manually applications can just set this field to
+	zero.
+
+	Drivers support this function only when they set the
+	``V4L2_CAP_TIMEPERFRAME`` flag in the ``capability`` field.
+    * - __u32
+      - ``extendedmode``
+      - Custom (driver specific) streaming parameters. When unused,
+	applications and drivers must set this field to zero. Applications
+	using this field should check the driver name and version, see
+	:ref:`querycap`.
+    * - __u32
+      - ``writebuffers``
+      - Applications set this field to the desired number of buffers used
+	internally by the driver in :ref:`write() <func-write>` mode. Drivers
+	return the actual number of buffers. When an application requests
+	zero buffers, drivers should just return the current setting
+	rather than the minimum or an error code. For details see
+	:ref:`rw`.
+    * - __u32
+      - ``reserved``\ [4]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _parm-caps:
+
+.. flat-table:: Streaming Parameters Capabilities
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_CAP_TIMEPERFRAME``
+      - 0x1000
+      - The frame skipping/repeating controlled by the ``timeperframe``
+	field is supported.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _parm-flags:
+
+.. flat-table:: Capture Parameters Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_MODE_HIGHQUALITY``
+      - 0x0001
+      - High quality imaging mode. High quality mode is intended for still
+	imaging applications. The idea is to get the best possible image
+	quality that the hardware can deliver. It is not defined how the
+	driver writer may achieve that; it will depend on the hardware and
+	the ingenuity of the driver writer. High quality mode is a
+	different mode from the regular motion video capture modes. In
+	high quality mode:
+
+	-  The driver may be able to capture higher resolutions than for
+	   motion capture.
+
+	-  The driver may support fewer pixel formats than motion capture
+	   (eg; true color).
+
+	-  The driver may capture and arithmetically combine multiple
+	   successive fields or frames to remove color edge artifacts and
+	   reduce the noise in the video data.
+
+	-  The driver may capture images in slices like a scanner in order
+	   to handle larger format images than would otherwise be
+	   possible.
+
+	-  An image capture operation may be significantly slower than
+	   motion capture.
+
+	-  Moving objects in the image might have excessive motion blur.
+
+	-  Capture might only work through the :ref:`read() <func-read>` call.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst b/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst
new file mode 100644
index 000000000000..c8add130c7a4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst
@@ -0,0 +1,100 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_PRIORITY:
+
+******************************************
+ioctl VIDIOC_G_PRIORITY, VIDIOC_S_PRIORITY
+******************************************
+
+Name
+====
+
+VIDIOC_G_PRIORITY - VIDIOC_S_PRIORITY - Query or request the access priority associated with a file descriptor
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_PRIORITY, enum v4l2_priority *argp )
+    :name: VIDIOC_G_PRIORITY
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_PRIORITY, const enum v4l2_priority *argp )
+    :name: VIDIOC_S_PRIORITY
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to an enum :c:type:`v4l2_priority` type.
+
+
+Description
+===========
+
+To query the current access priority applications call the
+:ref:`VIDIOC_G_PRIORITY <VIDIOC_G_PRIORITY>` ioctl with a pointer to an enum v4l2_priority
+variable where the driver stores the current priority.
+
+To request an access priority applications store the desired priority in
+an enum v4l2_priority variable and call :ref:`VIDIOC_S_PRIORITY <VIDIOC_G_PRIORITY>` ioctl
+with a pointer to this variable.
+
+
+.. c:type:: v4l2_priority
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. flat-table:: enum v4l2_priority
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_PRIORITY_UNSET``
+      - 0
+      -
+    * - ``V4L2_PRIORITY_BACKGROUND``
+      - 1
+      - Lowest priority, usually applications running in background, for
+	example monitoring VBI transmissions. A proxy application running
+	in user space will be necessary if multiple applications want to
+	read from a device at this priority.
+    * - ``V4L2_PRIORITY_INTERACTIVE``
+      - 2
+      -
+    * - ``V4L2_PRIORITY_DEFAULT``
+      - 2
+      - Medium priority, usually applications started and interactively
+	controlled by the user. For example TV viewers, Teletext browsers,
+	or just "panel" applications to change the channel or video
+	controls. This is the default priority unless an application
+	requests another.
+    * - ``V4L2_PRIORITY_RECORD``
+      - 3
+      - Highest priority. Only one file descriptor can have this priority,
+	it blocks any other fd from changing device properties. Usually
+	applications which must not be interrupted, like video recording.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The requested priority value is invalid.
+
+EBUSY
+    Another application already requested higher priority.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst
new file mode 100644
index 000000000000..faab0454b1e4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst
@@ -0,0 +1,200 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_SELECTION:
+
+********************************************
+ioctl VIDIOC_G_SELECTION, VIDIOC_S_SELECTION
+********************************************
+
+Name
+====
+
+VIDIOC_G_SELECTION - VIDIOC_S_SELECTION - Get or set one of the selection rectangles
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_SELECTION, struct v4l2_selection *argp )
+    :name: VIDIOC_G_SELECTION
+
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_SELECTION, struct v4l2_selection *argp )
+    :name: VIDIOC_S_SELECTION
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_selection`.
+
+Description
+===========
+
+The ioctls are used to query and configure selection rectangles.
+
+To query the cropping (composing) rectangle set struct
+:c:type:`v4l2_selection` ``type`` field to the
+respective buffer type. The next step is setting the
+value of struct :c:type:`v4l2_selection` ``target``
+field to ``V4L2_SEL_TGT_CROP`` (``V4L2_SEL_TGT_COMPOSE``). Please refer
+to table :ref:`v4l2-selections-common` or :ref:`selection-api` for
+additional targets. The ``flags`` and ``reserved`` fields of struct
+:c:type:`v4l2_selection` are ignored and they must be
+filled with zeros. The driver fills the rest of the structure or returns
+EINVAL error code if incorrect buffer type or target was used. If
+cropping (composing) is not supported then the active rectangle is not
+mutable and it is always equal to the bounds rectangle. Finally, the
+struct :c:type:`v4l2_rect` ``r`` rectangle is filled with
+the current cropping (composing) coordinates. The coordinates are
+expressed in driver-dependent units. The only exception are rectangles
+for images in raw formats, whose coordinates are always expressed in
+pixels.
+
+To change the cropping (composing) rectangle set the struct
+:c:type:`v4l2_selection` ``type`` field to the
+respective buffer type. The next step is setting the
+value of struct :c:type:`v4l2_selection` ``target`` to
+``V4L2_SEL_TGT_CROP`` (``V4L2_SEL_TGT_COMPOSE``). Please refer to table
+:ref:`v4l2-selections-common` or :ref:`selection-api` for additional
+targets. The struct :c:type:`v4l2_rect` ``r`` rectangle need
+to be set to the desired active area. Field struct
+:c:type:`v4l2_selection` ``reserved`` is ignored and
+must be filled with zeros. The driver may adjust coordinates of the
+requested rectangle. An application may introduce constraints to control
+rounding behaviour. The struct :c:type:`v4l2_selection`
+``flags`` field must be set to one of the following:
+
+-  ``0`` - The driver can adjust the rectangle size freely and shall
+   choose a crop/compose rectangle as close as possible to the requested
+   one.
+
+-  ``V4L2_SEL_FLAG_GE`` - The driver is not allowed to shrink the
+   rectangle. The original rectangle must lay inside the adjusted one.
+
+-  ``V4L2_SEL_FLAG_LE`` - The driver is not allowed to enlarge the
+   rectangle. The adjusted rectangle must lay inside the original one.
+
+-  ``V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE`` - The driver must choose the
+   size exactly the same as in the requested rectangle.
+
+Please refer to :ref:`sel-const-adjust`.
+
+The driver may have to adjusts the requested dimensions against hardware
+limits and other parts as the pipeline, i.e. the bounds given by the
+capture/output window or TV display. The closest possible values of
+horizontal and vertical offset and sizes are chosen according to
+following priority:
+
+1. Satisfy constraints from struct
+   :c:type:`v4l2_selection` ``flags``.
+
+2. Adjust width, height, left, and top to hardware limits and
+   alignments.
+
+3. Keep center of adjusted rectangle as close as possible to the
+   original one.
+
+4. Keep width and height as close as possible to original ones.
+
+5. Keep horizontal and vertical offset as close as possible to original
+   ones.
+
+On success the struct :c:type:`v4l2_rect` ``r`` field
+contains the adjusted rectangle. When the parameters are unsuitable the
+application may modify the cropping (composing) or image parameters and
+repeat the cycle until satisfactory parameters have been negotiated. If
+constraints flags have to be violated at then ``ERANGE`` is returned. The
+error indicates that *there exist no rectangle* that satisfies the
+constraints.
+
+Selection targets and flags are documented in
+:ref:`v4l2-selections-common`.
+
+
+.. _sel-const-adjust:
+
+.. kernel-figure::  constraints.svg
+    :alt:    constraints.svg
+    :align:  center
+
+    Size adjustments with constraint flags.
+
+    Behaviour of rectangle adjustment for different constraint flags.
+
+
+
+
+.. c:type:: v4l2_selection
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_selection
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Type of the buffer (from enum
+	:c:type:`v4l2_buf_type`).
+    * - __u32
+      - ``target``
+      - Used to select between
+	:ref:`cropping and composing rectangles <v4l2-selections-common>`.
+    * - __u32
+      - ``flags``
+      - Flags controlling the selection rectangle adjustments, refer to
+	:ref:`selection flags <v4l2-selection-flags>`.
+    * - struct :c:type:`v4l2_rect`
+      - ``r``
+      - The selection rectangle.
+    * - __u32
+      - ``reserved[9]``
+      - Reserved fields for future use. Drivers and applications must zero
+	this array.
+
+.. note::
+   Unfortunately in the case of multiplanar buffer types
+   (``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``)
+   this API was messed up with regards to how the :c:type:`v4l2_selection` ``type`` field
+   should be filled in. Some drivers only accepted the ``_MPLANE`` buffer type while
+   other drivers only accepted a non-multiplanar buffer type (i.e. without the
+   ``_MPLANE`` at the end).
+
+   Starting with kernel 4.13 both variations are allowed.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    Given buffer type ``type`` or the selection target ``target`` is not
+    supported, or the ``flags`` argument is not valid.
+
+ERANGE
+    It is not possible to adjust struct :c:type:`v4l2_rect`
+    ``r`` rectangle to satisfy all constraints given in the ``flags``
+    argument.
+
+ENODATA
+    Selection is not supported for this input or output.
+
+EBUSY
+    It is not possible to apply change of the selection rectangle at the
+    moment. Usually because streaming is in progress.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst
new file mode 100644
index 000000000000..7a62c4f4e37f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst
@@ -0,0 +1,202 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_SLICED_VBI_CAP:
+
+*****************************
+ioctl VIDIOC_G_SLICED_VBI_CAP
+*****************************
+
+Name
+====
+
+VIDIOC_G_SLICED_VBI_CAP - Query sliced VBI capabilities
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_SLICED_VBI_CAP, struct v4l2_sliced_vbi_cap *argp )
+    :name: VIDIOC_G_SLICED_VBI_CAP
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_sliced_vbi_cap`.
+
+
+Description
+===========
+
+To find out which data services are supported by a sliced VBI capture or
+output device, applications initialize the ``type`` field of a struct
+:c:type:`v4l2_sliced_vbi_cap`, clear the
+``reserved`` array and call the :ref:`VIDIOC_G_SLICED_VBI_CAP <VIDIOC_G_SLICED_VBI_CAP>` ioctl. The
+driver fills in the remaining fields or returns an ``EINVAL`` error code if
+the sliced VBI API is unsupported or ``type`` is invalid.
+
+.. note::
+
+   The ``type`` field was added, and the ioctl changed from read-only
+   to write-read, in Linux 2.6.19.
+
+
+.. c:type:: v4l2_sliced_vbi_cap
+
+.. tabularcolumns:: |p{1.2cm}|p{4.2cm}|p{4.1cm}|p{4.0cm}|p{4.0cm}|
+
+.. flat-table:: struct v4l2_sliced_vbi_cap
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 3 2 2 2
+
+    * - __u16
+      - ``service_set``
+      - :cspan:`2` A set of all data services supported by the driver.
+
+	Equal to the union of all elements of the ``service_lines`` array.
+    * - __u16
+      - ``service_lines``\ [2][24]
+      - :cspan:`2` Each element of this array contains a set of data
+	services the hardware can look for or insert into a particular
+	scan line. Data services are defined in :ref:`vbi-services`.
+	Array indices map to ITU-R line numbers\ [#f1]_ as follows:
+    * -
+      -
+      - Element
+      - 525 line systems
+      - 625 line systems
+    * -
+      -
+      - ``service_lines``\ [0][1]
+      - 1
+      - 1
+    * -
+      -
+      - ``service_lines``\ [0][23]
+      - 23
+      - 23
+    * -
+      -
+      - ``service_lines``\ [1][1]
+      - 264
+      - 314
+    * -
+      -
+      - ``service_lines``\ [1][23]
+      - 286
+      - 336
+    * -
+    * -
+      -
+      - :cspan:`2` The number of VBI lines the hardware can capture or
+	output per frame, or the number of services it can identify on a
+	given line may be limited. For example on PAL line 16 the hardware
+	may be able to look for a VPS or Teletext signal, but not both at
+	the same time. Applications can learn about these limits using the
+	:ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctl as described in
+	:ref:`sliced`.
+    * -
+    * -
+      -
+      - :cspan:`2` Drivers must set ``service_lines`` [0][0] and
+	``service_lines``\ [1][0] to zero.
+    * - __u32
+      - ``type``
+      - Type of the data stream, see :c:type:`v4l2_buf_type`. Should be
+	``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE`` or
+	``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``.
+    * - __u32
+      - ``reserved``\ [3]
+      - :cspan:`2` This array is reserved for future extensions.
+
+	Applications and drivers must set it to zero.
+
+.. [#f1]
+
+   See also :ref:`vbi-525` and :ref:`vbi-625`.
+
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{3.5cm}|p{1.0cm}|p{2.0cm}|p{2.0cm}|p{8.0cm}|
+
+.. _vbi-services:
+
+.. flat-table:: Sliced VBI services
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       2 1 1 2 2
+
+    * - Symbol
+      - Value
+      - Reference
+      - Lines, usually
+      - Payload
+    * - ``V4L2_SLICED_TELETEXT_B`` (Teletext System B)
+      - 0x0001
+      - :ref:`ets300706`,
+
+	:ref:`itu653`
+      - PAL/SECAM line 7-22, 320-335 (second field 7-22)
+      - Last 42 of the 45 byte Teletext packet, that is without clock
+	run-in and framing code, lsb first transmitted.
+    * - ``V4L2_SLICED_VPS``
+      - 0x0400
+      - :ref:`ets300231`
+      - PAL line 16
+      - Byte number 3 to 15 according to Figure 9 of ETS 300 231, lsb
+	first transmitted.
+    * - ``V4L2_SLICED_CAPTION_525``
+      - 0x1000
+      - :ref:`cea608`
+      - NTSC line 21, 284 (second field 21)
+      - Two bytes in transmission order, including parity bit, lsb first
+	transmitted.
+    * - ``V4L2_SLICED_WSS_625``
+      - 0x4000
+      - :ref:`en300294`,
+
+	:ref:`itu1119`
+      - PAL/SECAM line 23
+      -
+
+	::
+
+	    Byte        0                 1
+		 msb         lsb  msb           lsb
+	    Bit  7 6 5 4 3 2 1 0  x x 13 12 11 10 9
+    * - ``V4L2_SLICED_VBI_525``
+      - 0x1000
+      - :cspan:`2` Set of services applicable to 525 line systems.
+    * - ``V4L2_SLICED_VBI_625``
+      - 0x4401
+      - :cspan:`2` Set of services applicable to 625 line systems.
+
+.. raw:: latex
+
+    \normalsize
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The value in the ``type`` field is wrong.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-std.rst b/Documentation/userspace-api/media/v4l/vidioc-g-std.rst
new file mode 100644
index 000000000000..b0bdb719d405
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-std.rst
@@ -0,0 +1,81 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_STD:
+
+**************************************************************************
+ioctl VIDIOC_G_STD, VIDIOC_S_STD, VIDIOC_SUBDEV_G_STD, VIDIOC_SUBDEV_S_STD
+**************************************************************************
+
+Name
+====
+
+VIDIOC_G_STD - VIDIOC_S_STD - VIDIOC_SUBDEV_G_STD - VIDIOC_SUBDEV_S_STD - Query or select the video standard of the current input
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_STD, v4l2_std_id *argp )
+    :name: VIDIOC_G_STD
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_STD, const v4l2_std_id *argp )
+    :name: VIDIOC_S_STD
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_STD, v4l2_std_id *argp )
+    :name: VIDIOC_SUBDEV_G_STD
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_STD, const v4l2_std_id *argp )
+    :name: VIDIOC_SUBDEV_S_STD
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to :c:type:`v4l2_std_id`.
+
+
+Description
+===========
+
+To query and select the current video standard applications use the
+:ref:`VIDIOC_G_STD <VIDIOC_G_STD>` and :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` ioctls which take a pointer to a
+:ref:`v4l2_std_id <v4l2-std-id>` type as argument. :ref:`VIDIOC_G_STD <VIDIOC_G_STD>`
+can return a single flag or a set of flags as in struct
+:c:type:`v4l2_standard` field ``id``. The flags must be
+unambiguous such that they appear in only one enumerated
+struct :c:type:`v4l2_standard` structure.
+
+:ref:`VIDIOC_S_STD <VIDIOC_G_STD>` accepts one or more flags, being a write-only ioctl it
+does not return the actual new standard as :ref:`VIDIOC_G_STD <VIDIOC_G_STD>` does. When
+no flags are given or the current input does not support the requested
+standard the driver returns an ``EINVAL`` error code. When the standard set
+is ambiguous drivers may return ``EINVAL`` or choose any of the requested
+standards. If the current input or output does not support standard
+video timings (e.g. if :ref:`VIDIOC_ENUMINPUT`
+does not set the ``V4L2_IN_CAP_STD`` flag), then ``ENODATA`` error code is
+returned.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The :ref:`VIDIOC_S_STD <VIDIOC_G_STD>` parameter was unsuitable.
+
+ENODATA
+    Standard video timings are not supported for this input or output.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst b/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst
new file mode 100644
index 000000000000..40bff6f0a88d
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst
@@ -0,0 +1,476 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_G_TUNER:
+
+************************************
+ioctl VIDIOC_G_TUNER, VIDIOC_S_TUNER
+************************************
+
+Name
+====
+
+VIDIOC_G_TUNER - VIDIOC_S_TUNER - Get or set tuner attributes
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_G_TUNER, struct v4l2_tuner *argp )
+    :name: VIDIOC_G_TUNER
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_TUNER, const struct v4l2_tuner *argp )
+    :name: VIDIOC_S_TUNER
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_tuner`.
+
+
+Description
+===========
+
+To query the attributes of a tuner applications initialize the ``index``
+field and zero out the ``reserved`` array of a struct
+:c:type:`v4l2_tuner` and call the ``VIDIOC_G_TUNER`` ioctl
+with a pointer to this structure. Drivers fill the rest of the structure
+or return an ``EINVAL`` error code when the index is out of bounds. To
+enumerate all tuners applications shall begin at index zero,
+incrementing by one until the driver returns ``EINVAL``.
+
+Tuners have two writable properties, the audio mode and the radio
+frequency. To change the audio mode, applications initialize the
+``index``, ``audmode`` and ``reserved`` fields and call the
+``VIDIOC_S_TUNER`` ioctl. This will *not* change the current tuner,
+which is determined by the current video input. Drivers may choose a
+different audio mode if the requested mode is invalid or unsupported.
+Since this is a write-only ioctl, it does not return the actually
+selected audio mode.
+
+:ref:`SDR <sdr>` specific tuner types are ``V4L2_TUNER_SDR`` and
+``V4L2_TUNER_RF``. For SDR devices ``audmode`` field must be initialized
+to zero. The term 'tuner' means SDR receiver in this context.
+
+To change the radio frequency the
+:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available.
+
+
+ .. tabularcolumns:: |p{1.3cm}|p{3.0cm}|p{6.6cm}|p{6.6cm}|
+
+.. c:type:: v4l2_tuner
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_tuner
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - __u32
+      - ``index``
+      - :cspan:`1` Identifies the tuner, set by the application.
+    * - __u8
+      - ``name``\ [32]
+      - :cspan:`1`
+
+	Name of the tuner, a NUL-terminated ASCII string.
+
+	This information is intended for the user.
+    * - __u32
+      - ``type``
+      - :cspan:`1` Type of the tuner, see :c:type:`v4l2_tuner_type`.
+    * - __u32
+      - ``capability``
+      - :cspan:`1`
+
+	Tuner capability flags, see :ref:`tuner-capability`. Audio flags
+	indicate the ability to decode audio subprograms. They will *not*
+	change, for example with the current video standard.
+
+	When the structure refers to a radio tuner the
+	``V4L2_TUNER_CAP_LANG1``, ``V4L2_TUNER_CAP_LANG2`` and
+	``V4L2_TUNER_CAP_NORM`` flags can't be used.
+
+	If multiple frequency bands are supported, then ``capability`` is
+	the union of all ``capability`` fields of each struct
+	:c:type:`v4l2_frequency_band`.
+    * - __u32
+      - ``rangelow``
+      - :cspan:`1` The lowest tunable frequency in units of 62.5 kHz, or
+	if the ``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units
+	of 62.5 Hz, or if the ``capability`` flag ``V4L2_TUNER_CAP_1HZ``
+	is set, in units of 1 Hz. If multiple frequency bands are
+	supported, then ``rangelow`` is the lowest frequency of all the
+	frequency bands.
+    * - __u32
+      - ``rangehigh``
+      - :cspan:`1` The highest tunable frequency in units of 62.5 kHz,
+	or if the ``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in
+	units of 62.5 Hz, or if the ``capability`` flag
+	``V4L2_TUNER_CAP_1HZ`` is set, in units of 1 Hz. If multiple
+	frequency bands are supported, then ``rangehigh`` is the highest
+	frequency of all the frequency bands.
+    * - __u32
+      - ``rxsubchans``
+      - :cspan:`1`
+
+	Some tuners or audio decoders can determine the received audio
+	subprograms by analyzing audio carriers, pilot tones or other
+	indicators. To pass this information drivers set flags defined in
+	:ref:`tuner-rxsubchans` in this field. For example:
+    * -
+      -
+      - ``V4L2_TUNER_SUB_MONO``
+      - receiving mono audio
+    * -
+      -
+      - ``STEREO | SAP``
+      - receiving stereo audio and a secondary audio program
+    * -
+      -
+      - ``MONO | STEREO``
+      - receiving mono or stereo audio, the hardware cannot distinguish
+    * -
+      -
+      - ``LANG1 | LANG2``
+      - receiving bilingual audio
+    * -
+      -
+      - ``MONO | STEREO | LANG1 | LANG2``
+      - receiving mono, stereo or bilingual audio
+    * -
+      -
+      - :cspan:`1`
+
+	When the ``V4L2_TUNER_CAP_STEREO``, ``_LANG1``, ``_LANG2`` or
+	``_SAP`` flag is cleared in the ``capability`` field, the
+	corresponding ``V4L2_TUNER_SUB_`` flag must not be set here.
+
+	This field is valid only if this is the tuner of the current video
+	input, or when the structure refers to a radio tuner.
+    * - __u32
+      - ``audmode``
+      - :cspan:`1`
+
+	The selected audio mode, see :ref:`tuner-audmode` for valid
+	values. The audio mode does not affect audio subprogram detection,
+	and like a :ref:`control` it does not automatically
+	change unless the requested mode is invalid or unsupported. See
+	:ref:`tuner-matrix` for possible results when the selected and
+	received audio programs do not match.
+
+	Currently this is the only field of struct
+	struct :c:type:`v4l2_tuner` applications can change.
+    * - __u32
+      - ``signal``
+      - :cspan:`1` The signal strength if known.
+
+	Ranging from 0 to 65535. Higher values indicate a better signal.
+    * - __s32
+      - ``afc``
+      - :cspan:`1` Automatic frequency control.
+
+	When the ``afc`` value is negative, the frequency is too
+	low, when positive too high.
+    * - __u32
+      - ``reserved``\ [4]
+      - :cspan:`1` Reserved for future extensions.
+
+	Drivers and applications must set the array to zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. c:type:: v4l2_tuner_type
+
+.. flat-table:: enum v4l2_tuner_type
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 6
+
+    * - ``V4L2_TUNER_RADIO``
+      - 1
+      - Tuner supports radio
+    * - ``V4L2_TUNER_ANALOG_TV``
+      - 2
+      - Tuner supports analog TV
+    * - ``V4L2_TUNER_SDR``
+      - 4
+      - Tuner controls the A/D and/or D/A block of a
+	Software Digital Radio (SDR)
+    * - ``V4L2_TUNER_RF``
+      - 5
+      - Tuner controls the RF part of a Software Digital Radio (SDR)
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _tuner-capability:
+
+.. cssclass:: longtable
+
+.. flat-table:: Tuner and Modulator Capability Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_TUNER_CAP_LOW``
+      - 0x0001
+      - When set, tuning frequencies are expressed in units of 62.5 Hz
+	instead of 62.5 kHz.
+    * - ``V4L2_TUNER_CAP_NORM``
+      - 0x0002
+      - This is a multi-standard tuner; the video standard can or must be
+	switched. (B/G PAL tuners for example are typically not considered
+	multi-standard because the video standard is automatically
+	determined from the frequency band.) The set of supported video
+	standards is available from the struct
+	:c:type:`v4l2_input` pointing to this tuner, see the
+	description of ioctl :ref:`VIDIOC_ENUMINPUT`
+	for details. Only ``V4L2_TUNER_ANALOG_TV`` tuners can have this
+	capability.
+    * - ``V4L2_TUNER_CAP_HWSEEK_BOUNDED``
+      - 0x0004
+      - If set, then this tuner supports the hardware seek functionality
+	where the seek stops when it reaches the end of the frequency
+	range.
+    * - ``V4L2_TUNER_CAP_HWSEEK_WRAP``
+      - 0x0008
+      - If set, then this tuner supports the hardware seek functionality
+	where the seek wraps around when it reaches the end of the
+	frequency range.
+    * - ``V4L2_TUNER_CAP_STEREO``
+      - 0x0010
+      - Stereo audio reception is supported.
+    * - ``V4L2_TUNER_CAP_LANG1``
+      - 0x0040
+      - Reception of the primary language of a bilingual audio program is
+	supported. Bilingual audio is a feature of two-channel systems,
+	transmitting the primary language monaural on the main audio
+	carrier and a secondary language monaural on a second carrier.
+	Only ``V4L2_TUNER_ANALOG_TV`` tuners can have this capability.
+    * - ``V4L2_TUNER_CAP_LANG2``
+      - 0x0020
+      - Reception of the secondary language of a bilingual audio program
+	is supported. Only ``V4L2_TUNER_ANALOG_TV`` tuners can have this
+	capability.
+    * - ``V4L2_TUNER_CAP_SAP``
+      - 0x0020
+      - Reception of a secondary audio program is supported. This is a
+	feature of the BTSC system which accompanies the NTSC video
+	standard. Two audio carriers are available for mono or stereo
+	transmissions of a primary language, and an independent third
+	carrier for a monaural secondary language. Only
+	``V4L2_TUNER_ANALOG_TV`` tuners can have this capability.
+
+	.. note::
+
+	   The ``V4L2_TUNER_CAP_LANG2`` and ``V4L2_TUNER_CAP_SAP``
+	   flags are synonyms. ``V4L2_TUNER_CAP_SAP`` applies when the tuner
+	   supports the ``V4L2_STD_NTSC_M`` video standard.
+    * - ``V4L2_TUNER_CAP_RDS``
+      - 0x0080
+      - RDS capture is supported. This capability is only valid for radio
+	tuners.
+    * - ``V4L2_TUNER_CAP_RDS_BLOCK_IO``
+      - 0x0100
+      - The RDS data is passed as unparsed RDS blocks.
+    * - ``V4L2_TUNER_CAP_RDS_CONTROLS``
+      - 0x0200
+      - The RDS data is parsed by the hardware and set via controls.
+    * - ``V4L2_TUNER_CAP_FREQ_BANDS``
+      - 0x0400
+      - The :ref:`VIDIOC_ENUM_FREQ_BANDS`
+	ioctl can be used to enumerate the available frequency bands.
+    * - ``V4L2_TUNER_CAP_HWSEEK_PROG_LIM``
+      - 0x0800
+      - The range to search when using the hardware seek functionality is
+	programmable, see
+	:ref:`VIDIOC_S_HW_FREQ_SEEK` for
+	details.
+    * - ``V4L2_TUNER_CAP_1HZ``
+      - 0x1000
+      - When set, tuning frequencies are expressed in units of 1 Hz
+	instead of 62.5 kHz.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _tuner-rxsubchans:
+
+.. flat-table:: Tuner Audio Reception Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_TUNER_SUB_MONO``
+      - 0x0001
+      - The tuner receives a mono audio signal.
+    * - ``V4L2_TUNER_SUB_STEREO``
+      - 0x0002
+      - The tuner receives a stereo audio signal.
+    * - ``V4L2_TUNER_SUB_LANG1``
+      - 0x0008
+      - The tuner receives the primary language of a bilingual audio
+	signal. Drivers must clear this flag when the current video
+	standard is ``V4L2_STD_NTSC_M``.
+    * - ``V4L2_TUNER_SUB_LANG2``
+      - 0x0004
+      - The tuner receives the secondary language of a bilingual audio
+	signal (or a second audio program).
+    * - ``V4L2_TUNER_SUB_SAP``
+      - 0x0004
+      - The tuner receives a Second Audio Program.
+
+	.. note::
+
+	   The ``V4L2_TUNER_SUB_LANG2`` and ``V4L2_TUNER_SUB_SAP``
+	   flags are synonyms. The ``V4L2_TUNER_SUB_SAP`` flag applies
+	   when the current video standard is ``V4L2_STD_NTSC_M``.
+    * - ``V4L2_TUNER_SUB_RDS``
+      - 0x0010
+      - The tuner receives an RDS channel.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _tuner-audmode:
+
+.. flat-table:: Tuner Audio Modes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_TUNER_MODE_MONO``
+      - 0
+      - Play mono audio. When the tuner receives a stereo signal this a
+	down-mix of the left and right channel. When the tuner receives a
+	bilingual or SAP signal this mode selects the primary language.
+    * - ``V4L2_TUNER_MODE_STEREO``
+      - 1
+      - Play stereo audio. When the tuner receives bilingual audio it may
+	play different languages on the left and right channel or the
+	primary language is played on both channels.
+
+	Playing different languages in this mode is deprecated. New
+	drivers should do this only in ``MODE_LANG1_LANG2``.
+
+	When the tuner receives no stereo signal or does not support
+	stereo reception the driver shall fall back to ``MODE_MONO``.
+    * - ``V4L2_TUNER_MODE_LANG1``
+      - 3
+      - Play the primary language, mono or stereo. Only
+	``V4L2_TUNER_ANALOG_TV`` tuners support this mode.
+    * - ``V4L2_TUNER_MODE_LANG2``
+      - 2
+      - Play the secondary language, mono. When the tuner receives no
+	bilingual audio or SAP, or their reception is not supported the
+	driver shall fall back to mono or stereo mode. Only
+	``V4L2_TUNER_ANALOG_TV`` tuners support this mode.
+    * - ``V4L2_TUNER_MODE_SAP``
+      - 2
+      - Play the Second Audio Program. When the tuner receives no
+	bilingual audio or SAP, or their reception is not supported the
+	driver shall fall back to mono or stereo mode. Only
+	``V4L2_TUNER_ANALOG_TV`` tuners support this mode.
+
+	.. note:: The ``V4L2_TUNER_MODE_LANG2`` and ``V4L2_TUNER_MODE_SAP``
+	   are synonyms.
+    * - ``V4L2_TUNER_MODE_LANG1_LANG2``
+      - 4
+      - Play the primary language on the left channel, the secondary
+	language on the right channel. When the tuner receives no
+	bilingual audio or SAP, it shall fall back to ``MODE_LANG1`` or
+	``MODE_MONO``. Only ``V4L2_TUNER_ANALOG_TV`` tuners support this
+	mode.
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{1.5cm}|p{1.5cm}|p{2.9cm}|p{2.9cm}|p{2.9cm}|p{2.9cm}|
+
+.. _tuner-matrix:
+
+.. flat-table:: Tuner Audio Matrix
+    :header-rows:  2
+    :stub-columns: 0
+    :widths: 7 7 14 14 14 14
+
+    * -
+      - :cspan:`4` Selected ``V4L2_TUNER_MODE_``
+    * - Received ``V4L2_TUNER_SUB_``
+      - ``MONO``
+      - ``STEREO``
+      - ``LANG1``
+      - ``LANG2 = SAP``
+      - ``LANG1_LANG2``\ [#f1]_
+    * - ``MONO``
+      - Mono
+      - Mono/Mono
+      - Mono
+      - Mono
+      - Mono/Mono
+    * - ``MONO | SAP``
+      - Mono
+      - Mono/Mono
+      - Mono
+      - SAP
+      - Mono/SAP (preferred) or Mono/Mono
+    * - ``STEREO``
+      - L+R
+      - L/R
+      - Stereo L/R (preferred) or Mono L+R
+      - Stereo L/R (preferred) or Mono L+R
+      - L/R (preferred) or L+R/L+R
+    * - ``STEREO | SAP``
+      - L+R
+      - L/R
+      - Stereo L/R (preferred) or Mono L+R
+      - SAP
+      - L+R/SAP (preferred) or L/R or L+R/L+R
+    * - ``LANG1 | LANG2``
+      - Language 1
+      - Lang1/Lang2 (deprecated\ [#f2]_) or Lang1/Lang1
+      - Language 1
+      - Language 2
+      - Lang1/Lang2 (preferred) or Lang1/Lang1
+
+.. raw:: latex
+
+    \normalsize
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_tuner` ``index`` is out of
+    bounds.
+
+.. [#f1]
+   This mode has been added in Linux 2.6.17 and may not be supported by
+   older drivers.
+
+.. [#f2]
+   Playback of both languages in ``MODE_STEREO`` is deprecated. In the
+   future drivers should produce only the primary language in this mode.
+   Applications should request ``MODE_LANG1_LANG2`` to record both
+   languages or a stereo signal.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-log-status.rst b/Documentation/userspace-api/media/v4l/vidioc-log-status.rst
new file mode 100644
index 000000000000..64c06fa72b9c
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-log-status.rst
@@ -0,0 +1,56 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_LOG_STATUS:
+
+***********************
+ioctl VIDIOC_LOG_STATUS
+***********************
+
+Name
+====
+
+VIDIOC_LOG_STATUS - Log driver status information
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_LOG_STATUS)
+    :name: VIDIOC_LOG_STATUS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+
+Description
+===========
+
+As the video/audio devices become more complicated it becomes harder to
+debug problems. When this ioctl is called the driver will output the
+current device status to the kernel log. This is particular useful when
+dealing with problems like no sound, no video and incorrectly tuned
+channels. Also many modern devices autodetect video and audio standards
+and this ioctl will report what the device thinks what the standard is.
+Mismatches may give an indication where the problem is.
+
+This ioctl is optional and not all drivers support it. It was introduced
+in Linux 2.6.15.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-overlay.rst b/Documentation/userspace-api/media/v4l/vidioc-overlay.rst
new file mode 100644
index 000000000000..74310ff486ba
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-overlay.rst
@@ -0,0 +1,61 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_OVERLAY:
+
+********************
+ioctl VIDIOC_OVERLAY
+********************
+
+Name
+====
+
+VIDIOC_OVERLAY - Start or stop video overlay
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_OVERLAY, const int *argp )
+    :name: VIDIOC_OVERLAY
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to an integer.
+
+
+Description
+===========
+
+This ioctl is part of the :ref:`video overlay <overlay>` I/O method.
+Applications call :ref:`VIDIOC_OVERLAY` to start or stop the overlay. It
+takes a pointer to an integer which must be set to zero by the
+application to stop overlay, to one to start.
+
+Drivers do not support :ref:`VIDIOC_STREAMON` or
+:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` with
+``V4L2_BUF_TYPE_VIDEO_OVERLAY``.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The overlay parameters have not been set up. See :ref:`overlay`
+    for the necessary steps.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-prepare-buf.rst b/Documentation/userspace-api/media/v4l/vidioc-prepare-buf.rst
new file mode 100644
index 000000000000..b6c09d5b128f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-prepare-buf.rst
@@ -0,0 +1,65 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_PREPARE_BUF:
+
+************************
+ioctl VIDIOC_PREPARE_BUF
+************************
+
+Name
+====
+
+VIDIOC_PREPARE_BUF - Prepare a buffer for I/O
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_PREPARE_BUF, struct v4l2_buffer *argp )
+    :name: VIDIOC_PREPARE_BUF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_buffer`.
+
+
+Description
+===========
+
+Applications can optionally call the :ref:`VIDIOC_PREPARE_BUF` ioctl to
+pass ownership of the buffer to the driver before actually enqueuing it,
+using the :ref:`VIDIOC_QBUF <VIDIOC_QBUF>` ioctl, and to prepare it for future I/O. Such
+preparations may include cache invalidation or cleaning. Performing them
+in advance saves time during the actual I/O.
+
+The struct :c:type:`v4l2_buffer` structure is specified in
+:ref:`buffer`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EBUSY
+    File I/O is in progress.
+
+EINVAL
+    The buffer ``type`` is not supported, or the ``index`` is out of
+    bounds, or no buffers have been allocated yet, or the ``userptr`` or
+    ``length`` are invalid.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-qbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-qbuf.rst
new file mode 100644
index 000000000000..ec0a54fbeb43
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-qbuf.rst
@@ -0,0 +1,205 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_QBUF:
+
+*******************************
+ioctl VIDIOC_QBUF, VIDIOC_DQBUF
+*******************************
+
+Name
+====
+
+VIDIOC_QBUF - VIDIOC_DQBUF - Exchange a buffer with the driver
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_QBUF, struct v4l2_buffer *argp )
+    :name: VIDIOC_QBUF
+
+.. c:function:: int ioctl( int fd, VIDIOC_DQBUF, struct v4l2_buffer *argp )
+    :name: VIDIOC_DQBUF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_buffer`.
+
+
+Description
+===========
+
+Applications call the ``VIDIOC_QBUF`` ioctl to enqueue an empty
+(capturing) or filled (output) buffer in the driver's incoming queue.
+The semantics depend on the selected I/O method.
+
+To enqueue a buffer applications set the ``type`` field of a struct
+:c:type:`v4l2_buffer` to the same buffer type as was
+previously used with struct :c:type:`v4l2_format` ``type``
+and struct :c:type:`v4l2_requestbuffers` ``type``.
+Applications must also set the ``index`` field. Valid index numbers
+range from zero to the number of buffers allocated with
+:ref:`VIDIOC_REQBUFS` (struct
+:c:type:`v4l2_requestbuffers` ``count``) minus
+one. The contents of the struct :c:type:`v4l2_buffer` returned
+by a :ref:`VIDIOC_QUERYBUF` ioctl will do as well.
+When the buffer is intended for output (``type`` is
+``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``,
+or ``V4L2_BUF_TYPE_VBI_OUTPUT``) applications must also initialize the
+``bytesused``, ``field`` and ``timestamp`` fields, see :ref:`buffer`
+for details. Applications must also set ``flags`` to 0. The
+``reserved2`` and ``reserved`` fields must be set to 0. When using the
+:ref:`multi-planar API <planar-apis>`, the ``m.planes`` field must
+contain a userspace pointer to a filled-in array of struct
+:c:type:`v4l2_plane` and the ``length`` field must be set
+to the number of elements in that array.
+
+To enqueue a :ref:`memory mapped <mmap>` buffer applications set the
+``memory`` field to ``V4L2_MEMORY_MMAP``. When ``VIDIOC_QBUF`` is called
+with a pointer to this structure the driver sets the
+``V4L2_BUF_FLAG_MAPPED`` and ``V4L2_BUF_FLAG_QUEUED`` flags and clears
+the ``V4L2_BUF_FLAG_DONE`` flag in the ``flags`` field, or it returns an
+``EINVAL`` error code.
+
+To enqueue a :ref:`user pointer <userp>` buffer applications set the
+``memory`` field to ``V4L2_MEMORY_USERPTR``, the ``m.userptr`` field to
+the address of the buffer and ``length`` to its size. When the
+multi-planar API is used, ``m.userptr`` and ``length`` members of the
+passed array of struct :c:type:`v4l2_plane` have to be used
+instead. When ``VIDIOC_QBUF`` is called with a pointer to this structure
+the driver sets the ``V4L2_BUF_FLAG_QUEUED`` flag and clears the
+``V4L2_BUF_FLAG_MAPPED`` and ``V4L2_BUF_FLAG_DONE`` flags in the
+``flags`` field, or it returns an error code. This ioctl locks the
+memory pages of the buffer in physical memory, they cannot be swapped
+out to disk. Buffers remain locked until dequeued, until the
+:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or
+:ref:`VIDIOC_REQBUFS` ioctl is called, or until the
+device is closed.
+
+To enqueue a :ref:`DMABUF <dmabuf>` buffer applications set the
+``memory`` field to ``V4L2_MEMORY_DMABUF`` and the ``m.fd`` field to a
+file descriptor associated with a DMABUF buffer. When the multi-planar
+API is used the ``m.fd`` fields of the passed array of struct
+:c:type:`v4l2_plane` have to be used instead. When
+``VIDIOC_QBUF`` is called with a pointer to this structure the driver
+sets the ``V4L2_BUF_FLAG_QUEUED`` flag and clears the
+``V4L2_BUF_FLAG_MAPPED`` and ``V4L2_BUF_FLAG_DONE`` flags in the
+``flags`` field, or it returns an error code. This ioctl locks the
+buffer. Locking a buffer means passing it to a driver for a hardware
+access (usually DMA). If an application accesses (reads/writes) a locked
+buffer then the result is undefined. Buffers remain locked until
+dequeued, until the :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or
+:ref:`VIDIOC_REQBUFS` ioctl is called, or until the
+device is closed.
+
+The ``request_fd`` field can be used with the ``VIDIOC_QBUF`` ioctl to specify
+the file descriptor of a :ref:`request <media-request-api>`, if requests are
+in use. Setting it means that the buffer will not be passed to the driver
+until the request itself is queued. Also, the driver will apply any
+settings associated with the request for this buffer. This field will
+be ignored unless the ``V4L2_BUF_FLAG_REQUEST_FD`` flag is set.
+If the device does not support requests, then ``EBADR`` will be returned.
+If requests are supported but an invalid request file descriptor is given,
+then ``EINVAL`` will be returned.
+
+.. caution::
+   It is not allowed to mix queuing requests with queuing buffers directly.
+   ``EBUSY`` will be returned if the first buffer was queued directly and
+   then the application tries to queue a request, or vice versa. After
+   closing the file descriptor, calling
+   :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or calling :ref:`VIDIOC_REQBUFS`
+   the check for this will be reset.
+
+   For :ref:`memory-to-memory devices <mem2mem>` you can specify the
+   ``request_fd`` only for output buffers, not for capture buffers. Attempting
+   to specify this for a capture buffer will result in an ``EBADR`` error.
+
+Applications call the ``VIDIOC_DQBUF`` ioctl to dequeue a filled
+(capturing) or displayed (output) buffer from the driver's outgoing
+queue. They just set the ``type``, ``memory`` and ``reserved`` fields of
+a struct :c:type:`v4l2_buffer` as above, when
+``VIDIOC_DQBUF`` is called with a pointer to this structure the driver
+fills the remaining fields or returns an error code. The driver may also
+set ``V4L2_BUF_FLAG_ERROR`` in the ``flags`` field. It indicates a
+non-critical (recoverable) streaming error. In such case the application
+may continue as normal, but should be aware that data in the dequeued
+buffer might be corrupted. When using the multi-planar API, the planes
+array must be passed in as well.
+
+If the application sets the ``memory`` field to ``V4L2_MEMORY_DMABUF`` to
+dequeue a :ref:`DMABUF <dmabuf>` buffer, the driver fills the ``m.fd`` field
+with a file descriptor numerically the same as the one given to ``VIDIOC_QBUF``
+when the buffer was enqueued. No new file descriptor is created at dequeue time
+and the value is only for the application convenience. When the multi-planar
+API is used the ``m.fd`` fields of the passed array of struct
+:c:type:`v4l2_plane` are filled instead.
+
+By default ``VIDIOC_DQBUF`` blocks when no buffer is in the outgoing
+queue. When the ``O_NONBLOCK`` flag was given to the
+:ref:`open() <func-open>` function, ``VIDIOC_DQBUF`` returns
+immediately with an ``EAGAIN`` error code when no buffer is available.
+
+The struct :c:type:`v4l2_buffer` structure is specified in
+:ref:`buffer`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EAGAIN
+    Non-blocking I/O has been selected using ``O_NONBLOCK`` and no
+    buffer was in the outgoing queue.
+
+EINVAL
+    The buffer ``type`` is not supported, or the ``index`` is out of
+    bounds, or no buffers have been allocated yet, or the ``userptr`` or
+    ``length`` are invalid, or the ``V4L2_BUF_FLAG_REQUEST_FD`` flag was
+    set but the the given ``request_fd`` was invalid, or ``m.fd`` was
+    an invalid DMABUF file descriptor.
+
+EIO
+    ``VIDIOC_DQBUF`` failed due to an internal error. Can also indicate
+    temporary problems like signal loss.
+
+    .. note::
+
+       The driver might dequeue an (empty) buffer despite returning
+       an error, or even stop capturing. Reusing such buffer may be unsafe
+       though and its details (e.g. ``index``) may not be returned either.
+       It is recommended that drivers indicate recoverable errors by setting
+       the ``V4L2_BUF_FLAG_ERROR`` and returning 0 instead. In that case the
+       application should be able to safely reuse the buffer and continue
+       streaming.
+
+EPIPE
+    ``VIDIOC_DQBUF`` returns this on an empty capture queue for mem2mem
+    codecs if a buffer with the ``V4L2_BUF_FLAG_LAST`` was already
+    dequeued and no new buffers are expected to become available.
+
+EBADR
+    The ``V4L2_BUF_FLAG_REQUEST_FD`` flag was set but the device does not
+    support requests for the given buffer type, or
+    the ``V4L2_BUF_FLAG_REQUEST_FD`` flag was not set but the device requires
+    that the buffer is part of a request.
+
+EBUSY
+    The first buffer was queued via a request, but the application now tries
+    to queue it directly, or vice versa (it is not permitted to mix the two
+    APIs).
diff --git a/Documentation/userspace-api/media/v4l/vidioc-query-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-query-dv-timings.rst
new file mode 100644
index 000000000000..ab86408446f3
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-query-dv-timings.rst
@@ -0,0 +1,94 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_QUERY_DV_TIMINGS:
+
+*****************************
+ioctl VIDIOC_QUERY_DV_TIMINGS
+*****************************
+
+Name
+====
+
+VIDIOC_QUERY_DV_TIMINGS - VIDIOC_SUBDEV_QUERY_DV_TIMINGS - Sense the DV preset received by the current input
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_QUERY_DV_TIMINGS, struct v4l2_dv_timings *argp )
+    :name: VIDIOC_QUERY_DV_TIMINGS
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_QUERY_DV_TIMINGS, struct v4l2_dv_timings *argp )
+    :name: VIDIOC_SUBDEV_QUERY_DV_TIMINGS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_dv_timings`.
+
+
+Description
+===========
+
+The hardware may be able to detect the current DV timings automatically,
+similar to sensing the video standard. To do so, applications call
+:ref:`VIDIOC_QUERY_DV_TIMINGS` with a pointer to a struct
+:c:type:`v4l2_dv_timings`. Once the hardware detects
+the timings, it will fill in the timings structure.
+
+.. note::
+
+   Drivers shall *not* switch timings automatically if new
+   timings are detected. Instead, drivers should send the
+   ``V4L2_EVENT_SOURCE_CHANGE`` event (if they support this) and expect
+   that userspace will take action by calling :ref:`VIDIOC_QUERY_DV_TIMINGS`.
+   The reason is that new timings usually mean different buffer sizes as
+   well, and you cannot change buffer sizes on the fly. In general,
+   applications that receive the Source Change event will have to call
+   :ref:`VIDIOC_QUERY_DV_TIMINGS`, and if the detected timings are valid they
+   will have to stop streaming, set the new timings, allocate new buffers
+   and start streaming again.
+
+If the timings could not be detected because there was no signal, then
+ENOLINK is returned. If a signal was detected, but it was unstable and
+the receiver could not lock to the signal, then ``ENOLCK`` is returned. If
+the receiver could lock to the signal, but the format is unsupported
+(e.g. because the pixelclock is out of range of the hardware
+capabilities), then the driver fills in whatever timings it could find
+and returns ``ERANGE``. In that case the application can call
+:ref:`VIDIOC_DV_TIMINGS_CAP` to compare the
+found timings with the hardware's capabilities in order to give more
+precise feedback to the user.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+ENODATA
+    Digital video timings are not supported for this input or output.
+
+ENOLINK
+    No timings could be detected because no signal was found.
+
+ENOLCK
+    The signal was unstable and the hardware could not lock on to it.
+
+ERANGE
+    Timings were found, but they are out of range of the hardware
+    capabilities.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-querybuf.rst b/Documentation/userspace-api/media/v4l/vidioc-querybuf.rst
new file mode 100644
index 000000000000..646f91140ccf
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-querybuf.rst
@@ -0,0 +1,87 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_QUERYBUF:
+
+*********************
+ioctl VIDIOC_QUERYBUF
+*********************
+
+Name
+====
+
+VIDIOC_QUERYBUF - Query the status of a buffer
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_QUERYBUF, struct v4l2_buffer *argp )
+    :name: VIDIOC_QUERYBUF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_buffer`.
+
+
+Description
+===========
+
+This ioctl is part of the :ref:`streaming <mmap>` I/O method. It can
+be used to query the status of a buffer at any time after buffers have
+been allocated with the :ref:`VIDIOC_REQBUFS` ioctl.
+
+Applications set the ``type`` field of a struct
+:c:type:`v4l2_buffer` to the same buffer type as was
+previously used with struct :c:type:`v4l2_format` ``type``
+and struct :c:type:`v4l2_requestbuffers` ``type``,
+and the ``index`` field. Valid index numbers range from zero to the
+number of buffers allocated with
+:ref:`VIDIOC_REQBUFS` (struct
+:c:type:`v4l2_requestbuffers` ``count``) minus
+one. The ``reserved`` and ``reserved2`` fields must be set to 0. When
+using the :ref:`multi-planar API <planar-apis>`, the ``m.planes``
+field must contain a userspace pointer to an array of struct
+:c:type:`v4l2_plane` and the ``length`` field has to be set
+to the number of elements in that array. After calling
+:ref:`VIDIOC_QUERYBUF` with a pointer to this structure drivers return an
+error code or fill the rest of the structure.
+
+In the ``flags`` field the ``V4L2_BUF_FLAG_MAPPED``,
+``V4L2_BUF_FLAG_PREPARED``, ``V4L2_BUF_FLAG_QUEUED`` and
+``V4L2_BUF_FLAG_DONE`` flags will be valid. The ``memory`` field will be
+set to the current I/O method. For the single-planar API, the
+``m.offset`` contains the offset of the buffer from the start of the
+device memory, the ``length`` field its size. For the multi-planar API,
+fields ``m.mem_offset`` and ``length`` in the ``m.planes`` array
+elements will be used instead and the ``length`` field of struct
+:c:type:`v4l2_buffer` is set to the number of filled-in
+array elements. The driver may or may not set the remaining fields and
+flags, they are meaningless in this context.
+
+The struct :c:type:`v4l2_buffer` structure is specified in
+:ref:`buffer`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The buffer ``type`` is not supported, or the ``index`` is out of
+    bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst
new file mode 100644
index 000000000000..28e1f766128c
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst
@@ -0,0 +1,284 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_QUERYCAP:
+
+*********************
+ioctl VIDIOC_QUERYCAP
+*********************
+
+Name
+====
+
+VIDIOC_QUERYCAP - Query device capabilities
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_QUERYCAP, struct v4l2_capability *argp )
+    :name: VIDIOC_QUERYCAP
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_capability`.
+
+
+Description
+===========
+
+All V4L2 devices support the ``VIDIOC_QUERYCAP`` ioctl. It is used to
+identify kernel devices compatible with this specification and to obtain
+information about driver and hardware capabilities. The ioctl takes a
+pointer to a struct :c:type:`v4l2_capability` which is
+filled by the driver. When the driver is not compatible with this
+specification the ioctl returns an ``EINVAL`` error code.
+
+
+.. tabularcolumns:: |p{1.5cm}|p{2.5cm}|p{13cm}|
+
+.. c:type:: v4l2_capability
+
+.. flat-table:: struct v4l2_capability
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 4 20
+
+    * - __u8
+      - ``driver``\ [16]
+      - Name of the driver, a unique NUL-terminated ASCII string. For
+	example: "bttv". Driver specific applications can use this
+	information to verify the driver identity. It is also useful to
+	work around known bugs, or to identify drivers in error reports.
+
+	Storing strings in fixed sized arrays is bad practice but
+	unavoidable here. Drivers and applications should take precautions
+	to never read or write beyond the end of the array and to make
+	sure the strings are properly NUL-terminated.
+    * - __u8
+      - ``card``\ [32]
+      - Name of the device, a NUL-terminated UTF-8 string. For example:
+	"Yoyodyne TV/FM". One driver may support different brands or
+	models of video hardware. This information is intended for users,
+	for example in a menu of available devices. Since multiple TV
+	cards of the same brand may be installed which are supported by
+	the same driver, this name should be combined with the character
+	device file name (e. g. ``/dev/video2``) or the ``bus_info``
+	string to avoid ambiguities.
+    * - __u8
+      - ``bus_info``\ [32]
+      - Location of the device in the system, a NUL-terminated ASCII
+	string. For example: "PCI:0000:05:06.0". This information is
+	intended for users, to distinguish multiple identical devices. If
+	no such information is available the field must simply count the
+	devices controlled by the driver ("platform:vivid-000"). The
+	bus_info must start with "PCI:" for PCI boards, "PCIe:" for PCI
+	Express boards, "usb-" for USB devices, "I2C:" for i2c devices,
+	"ISA:" for ISA devices, "parport" for parallel port devices and
+	"platform:" for platform devices.
+    * - __u32
+      - ``version``
+      - Version number of the driver.
+
+	Starting with kernel 3.1, the version reported is provided by the
+	V4L2 subsystem following the kernel numbering scheme. However, it
+	may not always return the same version as the kernel if, for
+	example, a stable or distribution-modified kernel uses the V4L2
+	stack from a newer kernel.
+
+	The version number is formatted using the ``KERNEL_VERSION()``
+	macro. For example if the media stack corresponds to the V4L2
+	version shipped with Kernel 4.14, it would be equivalent to:
+    * - :cspan:`2`
+
+	``#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))``
+
+	``__u32 version = KERNEL_VERSION(4, 14, 0);``
+
+	``printf ("Version: %u.%u.%u\\n",``
+
+	``(version >> 16) & 0xFF, (version >> 8) & 0xFF, version & 0xFF);``
+    * - __u32
+      - ``capabilities``
+      - Available capabilities of the physical device as a whole, see
+	:ref:`device-capabilities`. The same physical device can export
+	multiple devices in /dev (e.g. /dev/videoX, /dev/vbiY and
+	/dev/radioZ). The ``capabilities`` field should contain a union of
+	all capabilities available around the several V4L2 devices
+	exported to userspace. For all those devices the ``capabilities``
+	field returns the same set of capabilities. This allows
+	applications to open just one of the devices (typically the video
+	device) and discover whether video, vbi and/or radio are also
+	supported.
+    * - __u32
+      - ``device_caps``
+      - Device capabilities of the opened device, see
+	:ref:`device-capabilities`. Should contain the available
+	capabilities of that specific device node. So, for example,
+	``device_caps`` of a radio device will only contain radio related
+	capabilities and no video or vbi capabilities. This field is only
+	set if the ``capabilities`` field contains the
+	``V4L2_CAP_DEVICE_CAPS`` capability. Only the ``capabilities``
+	field can have the ``V4L2_CAP_DEVICE_CAPS`` capability,
+	``device_caps`` will never set ``V4L2_CAP_DEVICE_CAPS``.
+    * - __u32
+      - ``reserved``\ [3]
+      - Reserved for future extensions. Drivers must set this array to
+	zero.
+
+
+
+.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
+
+.. _device-capabilities:
+
+.. cssclass:: longtable
+
+.. flat-table:: Device Capabilities Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_CAP_VIDEO_CAPTURE``
+      - 0x00000001
+      - The device supports the single-planar API through the
+	:ref:`Video Capture <capture>` interface.
+    * - ``V4L2_CAP_VIDEO_CAPTURE_MPLANE``
+      - 0x00001000
+      - The device supports the :ref:`multi-planar API <planar-apis>`
+	through the :ref:`Video Capture <capture>` interface.
+    * - ``V4L2_CAP_VIDEO_OUTPUT``
+      - 0x00000002
+      - The device supports the single-planar API through the
+	:ref:`Video Output <output>` interface.
+    * - ``V4L2_CAP_VIDEO_OUTPUT_MPLANE``
+      - 0x00002000
+      - The device supports the :ref:`multi-planar API <planar-apis>`
+	through the :ref:`Video Output <output>` interface.
+    * - ``V4L2_CAP_VIDEO_M2M``
+      - 0x00004000
+      - The device supports the single-planar API through the Video
+	Memory-To-Memory interface.
+    * - ``V4L2_CAP_VIDEO_M2M_MPLANE``
+      - 0x00008000
+      - The device supports the :ref:`multi-planar API <planar-apis>`
+	through the Video Memory-To-Memory interface.
+    * - ``V4L2_CAP_VIDEO_OVERLAY``
+      - 0x00000004
+      - The device supports the :ref:`Video Overlay <overlay>`
+	interface. A video overlay device typically stores captured images
+	directly in the video memory of a graphics card, with hardware
+	clipping and scaling.
+    * - ``V4L2_CAP_VBI_CAPTURE``
+      - 0x00000010
+      - The device supports the :ref:`Raw VBI Capture <raw-vbi>`
+	interface, providing Teletext and Closed Caption data.
+    * - ``V4L2_CAP_VBI_OUTPUT``
+      - 0x00000020
+      - The device supports the :ref:`Raw VBI Output <raw-vbi>`
+	interface.
+    * - ``V4L2_CAP_SLICED_VBI_CAPTURE``
+      - 0x00000040
+      - The device supports the :ref:`Sliced VBI Capture <sliced>`
+	interface.
+    * - ``V4L2_CAP_SLICED_VBI_OUTPUT``
+      - 0x00000080
+      - The device supports the :ref:`Sliced VBI Output <sliced>`
+	interface.
+    * - ``V4L2_CAP_RDS_CAPTURE``
+      - 0x00000100
+      - The device supports the :ref:`RDS <rds>` capture interface.
+    * - ``V4L2_CAP_VIDEO_OUTPUT_OVERLAY``
+      - 0x00000200
+      - The device supports the :ref:`Video Output Overlay <osd>` (OSD)
+	interface. Unlike the *Video Overlay* interface, this is a
+	secondary function of video output devices and overlays an image
+	onto an outgoing video signal. When the driver sets this flag, it
+	must clear the ``V4L2_CAP_VIDEO_OVERLAY`` flag and vice
+	versa. [#f1]_
+    * - ``V4L2_CAP_HW_FREQ_SEEK``
+      - 0x00000400
+      - The device supports the
+	:ref:`VIDIOC_S_HW_FREQ_SEEK` ioctl
+	for hardware frequency seeking.
+    * - ``V4L2_CAP_RDS_OUTPUT``
+      - 0x00000800
+      - The device supports the :ref:`RDS <rds>` output interface.
+    * - ``V4L2_CAP_TUNER``
+      - 0x00010000
+      - The device has some sort of tuner to receive RF-modulated video
+	signals. For more information about tuner programming see
+	:ref:`tuner`.
+    * - ``V4L2_CAP_AUDIO``
+      - 0x00020000
+      - The device has audio inputs or outputs. It may or may not support
+	audio recording or playback, in PCM or compressed formats. PCM
+	audio support must be implemented as ALSA or OSS interface. For
+	more information on audio inputs and outputs see :ref:`audio`.
+    * - ``V4L2_CAP_RADIO``
+      - 0x00040000
+      - This is a radio receiver.
+    * - ``V4L2_CAP_MODULATOR``
+      - 0x00080000
+      - The device has some sort of modulator to emit RF-modulated
+	video/audio signals. For more information about modulator
+	programming see :ref:`tuner`.
+    * - ``V4L2_CAP_SDR_CAPTURE``
+      - 0x00100000
+      - The device supports the :ref:`SDR Capture <sdr>` interface.
+    * - ``V4L2_CAP_EXT_PIX_FORMAT``
+      - 0x00200000
+      - The device supports the struct
+	:c:type:`v4l2_pix_format` extended fields.
+    * - ``V4L2_CAP_SDR_OUTPUT``
+      - 0x00400000
+      - The device supports the :ref:`SDR Output <sdr>` interface.
+    * - ``V4L2_CAP_META_CAPTURE``
+      - 0x00800000
+      - The device supports the :ref:`metadata` capture interface.
+    * - ``V4L2_CAP_READWRITE``
+      - 0x01000000
+      - The device supports the :ref:`read() <rw>` and/or
+	:ref:`write() <rw>` I/O methods.
+    * - ``V4L2_CAP_ASYNCIO``
+      - 0x02000000
+      - The device supports the :ref:`asynchronous <async>` I/O methods.
+    * - ``V4L2_CAP_STREAMING``
+      - 0x04000000
+      - The device supports the :ref:`streaming <mmap>` I/O method.
+    * - ``V4L2_CAP_META_OUTPUT``
+      - 0x08000000
+      - The device supports the :ref:`metadata` output interface.
+    * - ``V4L2_CAP_TOUCH``
+      - 0x10000000
+      - This is a touch device.
+    * - ``V4L2_CAP_DEVICE_CAPS``
+      - 0x80000000
+      - The driver fills the ``device_caps`` field. This capability can
+	only appear in the ``capabilities`` field and never in the
+	``device_caps`` field.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+.. [#f1]
+   The struct :c:type:`v4l2_framebuffer` lacks an
+   enum :c:type:`v4l2_buf_type` field, therefore the
+   type of overlay is implied by the driver capabilities.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
new file mode 100644
index 000000000000..fbb0038d86bf
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
@@ -0,0 +1,616 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_QUERYCTRL:
+
+*******************************************************************
+ioctls VIDIOC_QUERYCTRL, VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU
+*******************************************************************
+
+Name
+====
+
+VIDIOC_QUERYCTRL - VIDIOC_QUERY_EXT_CTRL - VIDIOC_QUERYMENU - Enumerate controls and menu control items
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int VIDIOC_QUERYCTRL, struct v4l2_queryctrl *argp )
+    :name: VIDIOC_QUERYCTRL
+
+.. c:function:: int ioctl( int fd, VIDIOC_QUERY_EXT_CTRL, struct v4l2_query_ext_ctrl *argp )
+    :name: VIDIOC_QUERY_EXT_CTRL
+
+.. c:function:: int ioctl( int fd, VIDIOC_QUERYMENU, struct v4l2_querymenu *argp )
+    :name: VIDIOC_QUERYMENU
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_queryctrl`, :c:type:`v4l2_query_ext_ctrl`
+    or :c:type:`v4l2_querymenu` (depending on the ioctl).
+
+
+Description
+===========
+
+To query the attributes of a control applications set the ``id`` field
+of a struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` and call the
+``VIDIOC_QUERYCTRL`` ioctl with a pointer to this structure. The driver
+fills the rest of the structure or returns an ``EINVAL`` error code when the
+``id`` is invalid.
+
+It is possible to enumerate controls by calling ``VIDIOC_QUERYCTRL``
+with successive ``id`` values starting from ``V4L2_CID_BASE`` up to and
+exclusive ``V4L2_CID_LASTP1``. Drivers may return ``EINVAL`` if a control in
+this range is not supported. Further applications can enumerate private
+controls, which are not defined in this specification, by starting at
+``V4L2_CID_PRIVATE_BASE`` and incrementing ``id`` until the driver
+returns ``EINVAL``.
+
+In both cases, when the driver sets the ``V4L2_CTRL_FLAG_DISABLED`` flag
+in the ``flags`` field this control is permanently disabled and should
+be ignored by the application. [#f1]_
+
+When the application ORs ``id`` with ``V4L2_CTRL_FLAG_NEXT_CTRL`` the
+driver returns the next supported non-compound control, or ``EINVAL`` if
+there is none. In addition, the ``V4L2_CTRL_FLAG_NEXT_COMPOUND`` flag
+can be specified to enumerate all compound controls (i.e. controls with
+type ≥ ``V4L2_CTRL_COMPOUND_TYPES`` and/or array control, in other words
+controls that contain more than one value). Specify both
+``V4L2_CTRL_FLAG_NEXT_CTRL`` and ``V4L2_CTRL_FLAG_NEXT_COMPOUND`` in
+order to enumerate all controls, compound or not. Drivers which do not
+support these flags yet always return ``EINVAL``.
+
+The ``VIDIOC_QUERY_EXT_CTRL`` ioctl was introduced in order to better
+support controls that can use compound types, and to expose additional
+control information that cannot be returned in struct
+:ref:`v4l2_queryctrl <v4l2-queryctrl>` since that structure is full.
+
+``VIDIOC_QUERY_EXT_CTRL`` is used in the same way as
+``VIDIOC_QUERYCTRL``, except that the ``reserved`` array must be zeroed
+as well.
+
+Additional information is required for menu controls: the names of the
+menu items. To query them applications set the ``id`` and ``index``
+fields of struct :ref:`v4l2_querymenu <v4l2-querymenu>` and call the
+``VIDIOC_QUERYMENU`` ioctl with a pointer to this structure. The driver
+fills the rest of the structure or returns an ``EINVAL`` error code when the
+``id`` or ``index`` is invalid. Menu items are enumerated by calling
+``VIDIOC_QUERYMENU`` with successive ``index`` values from struct
+:ref:`v4l2_queryctrl <v4l2-queryctrl>` ``minimum`` to ``maximum``,
+inclusive.
+
+.. note::
+
+   It is possible for ``VIDIOC_QUERYMENU`` to return
+   an ``EINVAL`` error code for some indices between ``minimum`` and
+   ``maximum``. In that case that particular menu item is not supported by
+   this driver. Also note that the ``minimum`` value is not necessarily 0.
+
+See also the examples in :ref:`control`.
+
+
+.. tabularcolumns:: |p{1.2cm}|p{3.6cm}|p{12.7cm}|
+
+.. _v4l2-queryctrl:
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_queryctrl
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``id``
+      - Identifies the control, set by the application. See
+	:ref:`control-id` for predefined IDs. When the ID is ORed with
+	V4L2_CTRL_FLAG_NEXT_CTRL the driver clears the flag and
+	returns the first control with a higher ID. Drivers which do not
+	support this flag yet always return an ``EINVAL`` error code.
+    * - __u32
+      - ``type``
+      - Type of control, see :c:type:`v4l2_ctrl_type`.
+    * - __u8
+      - ``name``\ [32]
+      - Name of the control, a NUL-terminated ASCII string. This
+	information is intended for the user.
+    * - __s32
+      - ``minimum``
+      - Minimum value, inclusive. This field gives a lower bound for the
+	control. See enum :c:type:`v4l2_ctrl_type` how
+	the minimum value is to be used for each possible control type.
+	Note that this a signed 32-bit value.
+    * - __s32
+      - ``maximum``
+      - Maximum value, inclusive. This field gives an upper bound for the
+	control. See enum :c:type:`v4l2_ctrl_type` how
+	the maximum value is to be used for each possible control type.
+	Note that this a signed 32-bit value.
+    * - __s32
+      - ``step``
+      - This field gives a step size for the control. See enum
+	:c:type:`v4l2_ctrl_type` how the step value is
+	to be used for each possible control type. Note that this an
+	unsigned 32-bit value.
+
+	Generally drivers should not scale hardware control values. It may
+	be necessary for example when the ``name`` or ``id`` imply a
+	particular unit and the hardware actually accepts only multiples
+	of said unit. If so, drivers must take care values are properly
+	rounded when scaling, such that errors will not accumulate on
+	repeated read-write cycles.
+
+	This field gives the smallest change of an integer control
+	actually affecting hardware. Often the information is needed when
+	the user can change controls by keyboard or GUI buttons, rather
+	than a slider. When for example a hardware register accepts values
+	0-511 and the driver reports 0-65535, step should be 128.
+
+	Note that although signed, the step value is supposed to be always
+	positive.
+    * - __s32
+      - ``default_value``
+      - The default value of a ``V4L2_CTRL_TYPE_INTEGER``, ``_BOOLEAN``,
+	``_BITMASK``, ``_MENU`` or ``_INTEGER_MENU`` control. Not valid
+	for other types of controls.
+
+	.. note::
+
+	   Drivers reset controls to their default value only when
+	   the driver is first loaded, never afterwards.
+    * - __u32
+      - ``flags``
+      - Control flags, see :ref:`control-flags`.
+    * - __u32
+      - ``reserved``\ [2]
+      - Reserved for future extensions. Drivers must set the array to
+	zero.
+
+
+
+.. tabularcolumns:: |p{1.2cm}|p{5.0cm}|p{11.3cm}|
+
+.. _v4l2-query-ext-ctrl:
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_query_ext_ctrl
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``id``
+      - Identifies the control, set by the application. See
+	:ref:`control-id` for predefined IDs. When the ID is ORed with
+	``V4L2_CTRL_FLAG_NEXT_CTRL`` the driver clears the flag and
+	returns the first non-compound control with a higher ID. When the
+	ID is ORed with ``V4L2_CTRL_FLAG_NEXT_COMPOUND`` the driver clears
+	the flag and returns the first compound control with a higher ID.
+	Set both to get the first control (compound or not) with a higher
+	ID.
+    * - __u32
+      - ``type``
+      - Type of control, see :c:type:`v4l2_ctrl_type`.
+    * - char
+      - ``name``\ [32]
+      - Name of the control, a NUL-terminated ASCII string. This
+	information is intended for the user.
+    * - __s64
+      - ``minimum``
+      - Minimum value, inclusive. This field gives a lower bound for the
+	control. See enum :c:type:`v4l2_ctrl_type` how
+	the minimum value is to be used for each possible control type.
+	Note that this a signed 64-bit value.
+    * - __s64
+      - ``maximum``
+      - Maximum value, inclusive. This field gives an upper bound for the
+	control. See enum :c:type:`v4l2_ctrl_type` how
+	the maximum value is to be used for each possible control type.
+	Note that this a signed 64-bit value.
+    * - __u64
+      - ``step``
+      - This field gives a step size for the control. See enum
+	:c:type:`v4l2_ctrl_type` how the step value is
+	to be used for each possible control type. Note that this an
+	unsigned 64-bit value.
+
+	Generally drivers should not scale hardware control values. It may
+	be necessary for example when the ``name`` or ``id`` imply a
+	particular unit and the hardware actually accepts only multiples
+	of said unit. If so, drivers must take care values are properly
+	rounded when scaling, such that errors will not accumulate on
+	repeated read-write cycles.
+
+	This field gives the smallest change of an integer control
+	actually affecting hardware. Often the information is needed when
+	the user can change controls by keyboard or GUI buttons, rather
+	than a slider. When for example a hardware register accepts values
+	0-511 and the driver reports 0-65535, step should be 128.
+    * - __s64
+      - ``default_value``
+      - The default value of a ``V4L2_CTRL_TYPE_INTEGER``, ``_INTEGER64``,
+	``_BOOLEAN``, ``_BITMASK``, ``_MENU``, ``_INTEGER_MENU``, ``_U8``
+	or ``_U16`` control. Not valid for other types of controls.
+
+	.. note::
+
+	   Drivers reset controls to their default value only when
+	   the driver is first loaded, never afterwards.
+    * - __u32
+      - ``flags``
+      - Control flags, see :ref:`control-flags`.
+    * - __u32
+      - ``elem_size``
+      - The size in bytes of a single element of the array. Given a char
+	pointer ``p`` to a 3-dimensional array you can find the position
+	of cell ``(z, y, x)`` as follows:
+	``p + ((z * dims[1] + y) * dims[0] + x) * elem_size``.
+	``elem_size`` is always valid, also when the control isn't an
+	array. For string controls ``elem_size`` is equal to
+	``maximum + 1``.
+    * - __u32
+      - ``elems``
+      - The number of elements in the N-dimensional array. If this control
+	is not an array, then ``elems`` is 1. The ``elems`` field can
+	never be 0.
+    * - __u32
+      - ``nr_of_dims``
+      - The number of dimension in the N-dimensional array. If this
+	control is not an array, then this field is 0.
+    * - __u32
+      - ``dims[V4L2_CTRL_MAX_DIMS]``
+      - The size of each dimension. The first ``nr_of_dims`` elements of
+	this array must be non-zero, all remaining elements must be zero.
+    * - __u32
+      - ``reserved``\ [32]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+
+
+
+.. tabularcolumns:: |p{1.2cm}|p{1.0cm}|p{1.7cm}|p{13.0cm}|
+
+.. _v4l2-querymenu:
+
+.. flat-table:: struct v4l2_querymenu
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``id``
+      - Identifies the control, set by the application from the respective
+	struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` ``id``.
+    * - __u32
+      - ``index``
+      - Index of the menu item, starting at zero, set by the application.
+    * - union {
+      - (anonymous)
+    * - __u8
+      - ``name``\ [32]
+      - Name of the menu item, a NUL-terminated ASCII string. This
+	information is intended for the user. This field is valid for
+	``V4L2_CTRL_TYPE_MENU`` type controls.
+    * - __s64
+      - ``value``
+      - Value of the integer menu item. This field is valid for
+	``V4L2_CTRL_TYPE_INTEGER_MENU`` type controls.
+    * - }
+      -
+    * - __u32
+      - ``reserved``
+      - Reserved for future extensions. Drivers must set the array to
+	zero.
+
+
+
+.. tabularcolumns:: |p{5.8cm}|p{1.4cm}|p{1.0cm}|p{1.4cm}|p{6.9cm}|
+
+.. c:type:: v4l2_ctrl_type
+
+.. cssclass:: longtable
+
+.. flat-table:: enum v4l2_ctrl_type
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       30 5 5 5 55
+
+    * - Type
+      - ``minimum``
+      - ``step``
+      - ``maximum``
+      - Description
+    * - ``V4L2_CTRL_TYPE_INTEGER``
+      - any
+      - any
+      - any
+      - An integer-valued control ranging from minimum to maximum
+	inclusive. The step value indicates the increment between values.
+    * - ``V4L2_CTRL_TYPE_BOOLEAN``
+      - 0
+      - 1
+      - 1
+      - A boolean-valued control. Zero corresponds to "disabled", and one
+	means "enabled".
+    * - ``V4L2_CTRL_TYPE_MENU``
+      - ≥ 0
+      - 1
+      - N-1
+      - The control has a menu of N choices. The names of the menu items
+	can be enumerated with the ``VIDIOC_QUERYMENU`` ioctl.
+    * - ``V4L2_CTRL_TYPE_INTEGER_MENU``
+      - ≥ 0
+      - 1
+      - N-1
+      - The control has a menu of N choices. The values of the menu items
+	can be enumerated with the ``VIDIOC_QUERYMENU`` ioctl. This is
+	similar to ``V4L2_CTRL_TYPE_MENU`` except that instead of strings,
+	the menu items are signed 64-bit integers.
+    * - ``V4L2_CTRL_TYPE_BITMASK``
+      - 0
+      - n/a
+      - any
+      - A bitmask field. The maximum value is the set of bits that can be
+	used, all other bits are to be 0. The maximum value is interpreted
+	as a __u32, allowing the use of bit 31 in the bitmask.
+    * - ``V4L2_CTRL_TYPE_BUTTON``
+      - 0
+      - 0
+      - 0
+      - A control which performs an action when set. Drivers must ignore
+	the value passed with ``VIDIOC_S_CTRL`` and return an ``EACCES`` error
+	code on a ``VIDIOC_G_CTRL`` attempt.
+    * - ``V4L2_CTRL_TYPE_INTEGER64``
+      - any
+      - any
+      - any
+      - A 64-bit integer valued control. Minimum, maximum and step size
+	cannot be queried using ``VIDIOC_QUERYCTRL``. Only
+	``VIDIOC_QUERY_EXT_CTRL`` can retrieve the 64-bit min/max/step
+	values, they should be interpreted as n/a when using
+	``VIDIOC_QUERYCTRL``.
+    * - ``V4L2_CTRL_TYPE_STRING``
+      - ≥ 0
+      - ≥ 1
+      - ≥ 0
+      - The minimum and maximum string lengths. The step size means that
+	the string must be (minimum + N * step) characters long for N ≥ 0.
+	These lengths do not include the terminating zero, so in order to
+	pass a string of length 8 to
+	:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` you need to
+	set the ``size`` field of struct
+	:c:type:`v4l2_ext_control` to 9. For
+	:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` you can set
+	the ``size`` field to ``maximum`` + 1. Which character encoding is
+	used will depend on the string control itself and should be part
+	of the control documentation.
+    * - ``V4L2_CTRL_TYPE_CTRL_CLASS``
+      - n/a
+      - n/a
+      - n/a
+      - This is not a control. When ``VIDIOC_QUERYCTRL`` is called with a
+	control ID equal to a control class code (see :ref:`ctrl-class`)
+	+ 1, the ioctl returns the name of the control class and this
+	control type. Older drivers which do not support this feature
+	return an ``EINVAL`` error code.
+    * - ``V4L2_CTRL_TYPE_U8``
+      - any
+      - any
+      - any
+      - An unsigned 8-bit valued control ranging from minimum to maximum
+	inclusive. The step value indicates the increment between values.
+    * - ``V4L2_CTRL_TYPE_U16``
+      - any
+      - any
+      - any
+      - An unsigned 16-bit valued control ranging from minimum to maximum
+	inclusive. The step value indicates the increment between values.
+    * - ``V4L2_CTRL_TYPE_U32``
+      - any
+      - any
+      - any
+      - An unsigned 32-bit valued control ranging from minimum to maximum
+	inclusive. The step value indicates the increment between values.
+    * - ``V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_mpeg2_slice_params`, containing MPEG-2
+	slice parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_MPEG2_QUANTIZATION``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_mpeg2_quantization`, containing MPEG-2
+	quantization matrices for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_AREA``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_area`, containing the width and the height
+        of a rectangular area. Units depend on the use case.
+    * - ``V4L2_CTRL_TYPE_H264_SPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_sps`, containing H264
+	sequence parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_PPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_pps`, containing H264
+	picture parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SCALING_MATRIX``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_scaling_matrix`, containing H264
+	scaling matrices for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SLICE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_slice_params`, containing H264
+	slice parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_DECODE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_decode_params`, containing H264
+	decode parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_HEVC_SPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_hevc_sps`, containing HEVC Sequence
+	Parameter Set for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_HEVC_PPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_hevc_pps`, containing HEVC Picture
+	Parameter Set for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_hevc_slice_params`, containing HEVC
+	slice parameters for stateless video decoders.
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _control-flags:
+
+.. cssclass:: longtable
+
+.. flat-table:: Control Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_CTRL_FLAG_DISABLED``
+      - 0x0001
+      - This control is permanently disabled and should be ignored by the
+	application. Any attempt to change the control will result in an
+	``EINVAL`` error code.
+    * - ``V4L2_CTRL_FLAG_GRABBED``
+      - 0x0002
+      - This control is temporarily unchangeable, for example because
+	another application took over control of the respective resource.
+	Such controls may be displayed specially in a user interface.
+	Attempts to change the control may result in an ``EBUSY`` error code.
+    * - ``V4L2_CTRL_FLAG_READ_ONLY``
+      - 0x0004
+      - This control is permanently readable only. Any attempt to change
+	the control will result in an ``EINVAL`` error code.
+    * - ``V4L2_CTRL_FLAG_UPDATE``
+      - 0x0008
+      - A hint that changing this control may affect the value of other
+	controls within the same control class. Applications should update
+	their user interface accordingly.
+    * - ``V4L2_CTRL_FLAG_INACTIVE``
+      - 0x0010
+      - This control is not applicable to the current configuration and
+	should be displayed accordingly in a user interface. For example
+	the flag may be set on a MPEG audio level 2 bitrate control when
+	MPEG audio encoding level 1 was selected with another control.
+    * - ``V4L2_CTRL_FLAG_SLIDER``
+      - 0x0020
+      - A hint that this control is best represented as a slider-like
+	element in a user interface.
+    * - ``V4L2_CTRL_FLAG_WRITE_ONLY``
+      - 0x0040
+      - This control is permanently writable only. Any attempt to read the
+	control will result in an ``EACCES`` error code error code. This flag
+	is typically present for relative controls or action controls
+	where writing a value will cause the device to carry out a given
+	action (e. g. motor control) but no meaningful value can be
+	returned.
+    * - ``V4L2_CTRL_FLAG_VOLATILE``
+      - 0x0080
+      - This control is volatile, which means that the value of the
+	control changes continuously. A typical example would be the
+	current gain value if the device is in auto-gain mode. In such a
+	case the hardware calculates the gain value based on the lighting
+	conditions which can change over time.
+
+	.. note::
+
+	   Setting a new value for a volatile control will be ignored
+	   unless
+	   :ref:`V4L2_CTRL_FLAG_EXECUTE_ON_WRITE <FLAG_EXECUTE_ON_WRITE>`
+	   is also set.
+	   Setting a new value for a volatile control will *never* trigger a
+	   :ref:`V4L2_EVENT_CTRL_CH_VALUE <ctrl-changes-flags>` event.
+    * - ``V4L2_CTRL_FLAG_HAS_PAYLOAD``
+      - 0x0100
+      - This control has a pointer type, so its value has to be accessed
+	using one of the pointer fields of struct
+	:c:type:`v4l2_ext_control`. This flag is set
+	for controls that are an array, string, or have a compound type.
+	In all cases you have to set a pointer to memory containing the
+	payload of the control.
+    * .. _FLAG_EXECUTE_ON_WRITE:
+
+      - ``V4L2_CTRL_FLAG_EXECUTE_ON_WRITE``
+      - 0x0200
+      - The value provided to the control will be propagated to the driver
+	even if it remains constant. This is required when the control
+	represents an action on the hardware. For example: clearing an
+	error flag or triggering the flash. All the controls of the type
+	``V4L2_CTRL_TYPE_BUTTON`` have this flag set.
+    * .. _FLAG_MODIFY_LAYOUT:
+
+      - ``V4L2_CTRL_FLAG_MODIFY_LAYOUT``
+      - 0x0400
+      - Changing this control value may modify the layout of the
+        buffer (for video devices) or the media bus format (for sub-devices).
+
+	A typical example would be the ``V4L2_CID_ROTATE`` control.
+
+	Note that typically controls with this flag will also set the
+	``V4L2_CTRL_FLAG_GRABBED`` flag when buffers are allocated or
+	streaming is in progress since most drivers do not support changing
+	the format in that case.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` ``id`` is
+    invalid. The struct :ref:`v4l2_querymenu <v4l2-querymenu>` ``id``
+    is invalid or ``index`` is out of range (less than ``minimum`` or
+    greater than ``maximum``) or this particular menu item is not
+    supported by the driver.
+
+EACCES
+    An attempt was made to read a write-only control.
+
+.. [#f1]
+   ``V4L2_CTRL_FLAG_DISABLED`` was intended for two purposes: Drivers
+   can skip predefined controls not supported by the hardware (although
+   returning ``EINVAL`` would do as well), or disable predefined and private
+   controls after hardware detection without the trouble of reordering
+   control arrays and indices (``EINVAL`` cannot be used to skip private
+   controls because it would prematurely end the enumeration).
diff --git a/Documentation/userspace-api/media/v4l/vidioc-querystd.rst b/Documentation/userspace-api/media/v4l/vidioc-querystd.rst
new file mode 100644
index 000000000000..899f0ef6eefe
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-querystd.rst
@@ -0,0 +1,77 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_QUERYSTD:
+
+*********************************************
+ioctl VIDIOC_QUERYSTD, VIDIOC_SUBDEV_QUERYSTD
+*********************************************
+
+Name
+====
+
+VIDIOC_QUERYSTD - VIDIOC_SUBDEV_QUERYSTD - Sense the video standard received by the current input
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_QUERYSTD, v4l2_std_id *argp )
+    :name: VIDIOC_QUERYSTD
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_QUERYSTD, v4l2_std_id *argp )
+    :name: VIDIOC_SUBDEV_QUERYSTD
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to :c:type:`v4l2_std_id`.
+
+
+Description
+===========
+
+The hardware may be able to detect the current video standard
+automatically. To do so, applications call :ref:`VIDIOC_QUERYSTD` with a
+pointer to a :ref:`v4l2_std_id <v4l2-std-id>` type. The driver
+stores here a set of candidates, this can be a single flag or a set of
+supported standards if for example the hardware can only distinguish
+between 50 and 60 Hz systems. If no signal was detected, then the driver
+will return V4L2_STD_UNKNOWN. When detection is not possible or fails,
+the set must contain all standards supported by the current video input
+or output.
+
+.. note::
+
+   Drivers shall *not* switch the video standard
+   automatically if a new video standard is detected. Instead, drivers
+   should send the ``V4L2_EVENT_SOURCE_CHANGE`` event (if they support
+   this) and expect that userspace will take action by calling
+   :ref:`VIDIOC_QUERYSTD`. The reason is that a new video standard can mean
+   different buffer sizes as well, and you cannot change buffer sizes on
+   the fly. In general, applications that receive the Source Change event
+   will have to call :ref:`VIDIOC_QUERYSTD`, and if the detected video
+   standard is valid they will have to stop streaming, set the new
+   standard, allocate new buffers and start streaming again.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+ENODATA
+    Standard video timings are not supported for this input or output.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
new file mode 100644
index 000000000000..b6d52083707b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
@@ -0,0 +1,169 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_REQBUFS:
+
+********************
+ioctl VIDIOC_REQBUFS
+********************
+
+Name
+====
+
+VIDIOC_REQBUFS - Initiate Memory Mapping, User Pointer I/O or DMA buffer I/O
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_REQBUFS, struct v4l2_requestbuffers *argp )
+    :name: VIDIOC_REQBUFS
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_requestbuffers`.
+
+Description
+===========
+
+This ioctl is used to initiate :ref:`memory mapped <mmap>`,
+:ref:`user pointer <userp>` or :ref:`DMABUF <dmabuf>` based I/O.
+Memory mapped buffers are located in device memory and must be allocated
+with this ioctl before they can be mapped into the application's address
+space. User buffers are allocated by applications themselves, and this
+ioctl is merely used to switch the driver into user pointer I/O mode and
+to setup some internal structures. Similarly, DMABUF buffers are
+allocated by applications through a device driver, and this ioctl only
+configures the driver into DMABUF I/O mode without performing any direct
+allocation.
+
+To allocate device buffers applications initialize all fields of the
+struct :c:type:`v4l2_requestbuffers` structure. They set the ``type``
+field to the respective stream or buffer type, the ``count`` field to
+the desired number of buffers, ``memory`` must be set to the requested
+I/O method and the ``reserved`` array must be zeroed. When the ioctl is
+called with a pointer to this structure the driver will attempt to
+allocate the requested number of buffers and it stores the actual number
+allocated in the ``count`` field. It can be smaller than the number
+requested, even zero, when the driver runs out of free memory. A larger
+number is also possible when the driver requires more buffers to
+function correctly. For example video output requires at least two
+buffers, one displayed and one filled by the application.
+
+When the I/O method is not supported the ioctl returns an ``EINVAL`` error
+code.
+
+Applications can call :ref:`VIDIOC_REQBUFS` again to change the number of
+buffers. Note that if any buffers are still mapped or exported via DMABUF,
+then :ref:`VIDIOC_REQBUFS` can only succeed if the
+``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` capability is set. Otherwise
+:ref:`VIDIOC_REQBUFS` will return the ``EBUSY`` error code.
+If ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` is set, then these buffers are
+orphaned and will be freed when they are unmapped or when the exported DMABUF
+fds are closed. A ``count`` value of zero frees or orphans all buffers, after
+aborting or finishing any DMA in progress, an implicit
+:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`.
+
+
+.. c:type:: v4l2_requestbuffers
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_requestbuffers
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``count``
+      - The number of buffers requested or granted.
+    * - __u32
+      - ``type``
+      - Type of the stream or buffers, this is the same as the struct
+	:c:type:`v4l2_format` ``type`` field. See
+	:c:type:`v4l2_buf_type` for valid values.
+    * - __u32
+      - ``memory``
+      - Applications set this field to ``V4L2_MEMORY_MMAP``,
+	``V4L2_MEMORY_DMABUF`` or ``V4L2_MEMORY_USERPTR``. See
+	:c:type:`v4l2_memory`.
+    * - __u32
+      - ``capabilities``
+      - Set by the driver. If 0, then the driver doesn't support
+        capabilities. In that case all you know is that the driver is
+	guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support
+	other :c:type:`v4l2_memory` types. It will not support any other
+	capabilities.
+
+	If you want to query the capabilities with a minimum of side-effects,
+	then this can be called with ``count`` set to 0, ``memory`` set to
+	``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will
+	free any previously allocated buffers, so this is typically something
+	that will be done at the start of the application.
+    * - __u32
+      - ``reserved``\ [1]
+      - A place holder for future extensions. Drivers and applications
+	must set the array to zero.
+
+.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
+
+.. _v4l2-buf-capabilities:
+.. _V4L2-BUF-CAP-SUPPORTS-MMAP:
+.. _V4L2-BUF-CAP-SUPPORTS-USERPTR:
+.. _V4L2-BUF-CAP-SUPPORTS-DMABUF:
+.. _V4L2-BUF-CAP-SUPPORTS-REQUESTS:
+.. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS:
+.. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF:
+
+.. cssclass:: longtable
+
+.. flat-table:: V4L2 Buffer Capabilities Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_BUF_CAP_SUPPORTS_MMAP``
+      - 0x00000001
+      - This buffer type supports the ``V4L2_MEMORY_MMAP`` streaming mode.
+    * - ``V4L2_BUF_CAP_SUPPORTS_USERPTR``
+      - 0x00000002
+      - This buffer type supports the ``V4L2_MEMORY_USERPTR`` streaming mode.
+    * - ``V4L2_BUF_CAP_SUPPORTS_DMABUF``
+      - 0x00000004
+      - This buffer type supports the ``V4L2_MEMORY_DMABUF`` streaming mode.
+    * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS``
+      - 0x00000008
+      - This buffer type supports :ref:`requests <media-request-api>`.
+    * - ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS``
+      - 0x00000010
+      - The kernel allows calling :ref:`VIDIOC_REQBUFS` while buffers are still
+        mapped or exported via DMABUF. These orphaned buffers will be freed
+        when they are unmapped or when the exported DMABUF fds are closed.
+    * - ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF``
+      - 0x00000020
+      - Only valid for stateless decoders. If set, then userspace can set the
+        ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag to hold off on returning the
+	capture buffer until the OUTPUT timestamp changes.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The buffer type (``type`` field) or the requested I/O method
+    (``memory``) is not supported.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst
new file mode 100644
index 000000000000..4c16e7e89cfa
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst
@@ -0,0 +1,147 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_S_HW_FREQ_SEEK:
+
+***************************
+ioctl VIDIOC_S_HW_FREQ_SEEK
+***************************
+
+Name
+====
+
+VIDIOC_S_HW_FREQ_SEEK - Perform a hardware frequency seek
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_S_HW_FREQ_SEEK, struct v4l2_hw_freq_seek *argp )
+    :name: VIDIOC_S_HW_FREQ_SEEK
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_hw_freq_seek`.
+
+
+Description
+===========
+
+Start a hardware frequency seek from the current frequency. To do this
+applications initialize the ``tuner``, ``type``, ``seek_upward``,
+``wrap_around``, ``spacing``, ``rangelow`` and ``rangehigh`` fields, and
+zero out the ``reserved`` array of a struct
+:c:type:`v4l2_hw_freq_seek` and call the
+``VIDIOC_S_HW_FREQ_SEEK`` ioctl with a pointer to this structure.
+
+The ``rangelow`` and ``rangehigh`` fields can be set to a non-zero value
+to tell the driver to search a specific band. If the struct
+:c:type:`v4l2_tuner` ``capability`` field has the
+``V4L2_TUNER_CAP_HWSEEK_PROG_LIM`` flag set, these values must fall
+within one of the bands returned by
+:ref:`VIDIOC_ENUM_FREQ_BANDS`. If the
+``V4L2_TUNER_CAP_HWSEEK_PROG_LIM`` flag is not set, then these values
+must exactly match those of one of the bands returned by
+:ref:`VIDIOC_ENUM_FREQ_BANDS`. If the
+current frequency of the tuner does not fall within the selected band it
+will be clamped to fit in the band before the seek is started.
+
+If an error is returned, then the original frequency will be restored.
+
+This ioctl is supported if the ``V4L2_CAP_HW_FREQ_SEEK`` capability is
+set.
+
+If this ioctl is called from a non-blocking filehandle, then ``EAGAIN``
+error code is returned and no seek takes place.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_hw_freq_seek
+
+.. flat-table:: struct v4l2_hw_freq_seek
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``tuner``
+      - The tuner index number. This is the same value as in the struct
+	:c:type:`v4l2_input` ``tuner`` field and the struct
+	:c:type:`v4l2_tuner` ``index`` field.
+    * - __u32
+      - ``type``
+      - The tuner type. This is the same value as in the struct
+	:c:type:`v4l2_tuner` ``type`` field. See
+	:c:type:`v4l2_tuner_type`
+    * - __u32
+      - ``seek_upward``
+      - If non-zero, seek upward from the current frequency, else seek
+	downward.
+    * - __u32
+      - ``wrap_around``
+      - If non-zero, wrap around when at the end of the frequency range,
+	else stop seeking. The struct :c:type:`v4l2_tuner`
+	``capability`` field will tell you what the hardware supports.
+    * - __u32
+      - ``spacing``
+      - If non-zero, defines the hardware seek resolution in Hz. The
+	driver selects the nearest value that is supported by the device.
+	If spacing is zero a reasonable default value is used.
+    * - __u32
+      - ``rangelow``
+      - If non-zero, the lowest tunable frequency of the band to search in
+	units of 62.5 kHz, or if the struct
+	:c:type:`v4l2_tuner` ``capability`` field has the
+	``V4L2_TUNER_CAP_LOW`` flag set, in units of 62.5 Hz or if the
+	struct :c:type:`v4l2_tuner` ``capability`` field has
+	the ``V4L2_TUNER_CAP_1HZ`` flag set, in units of 1 Hz. If
+	``rangelow`` is zero a reasonable default value is used.
+    * - __u32
+      - ``rangehigh``
+      - If non-zero, the highest tunable frequency of the band to search
+	in units of 62.5 kHz, or if the struct
+	:c:type:`v4l2_tuner` ``capability`` field has the
+	``V4L2_TUNER_CAP_LOW`` flag set, in units of 62.5 Hz or if the
+	struct :c:type:`v4l2_tuner` ``capability`` field has
+	the ``V4L2_TUNER_CAP_1HZ`` flag set, in units of 1 Hz. If
+	``rangehigh`` is zero a reasonable default value is used.
+    * - __u32
+      - ``reserved``\ [5]
+      - Reserved for future extensions. Applications must set the array to
+	zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The ``tuner`` index is out of bounds, the ``wrap_around`` value is
+    not supported or one of the values in the ``type``, ``rangelow`` or
+    ``rangehigh`` fields is wrong.
+
+EAGAIN
+    Attempted to call ``VIDIOC_S_HW_FREQ_SEEK`` with the filehandle in
+    non-blocking mode.
+
+ENODATA
+    The hardware seek found no channels.
+
+EBUSY
+    Another hardware seek is already in progress.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-streamon.rst b/Documentation/userspace-api/media/v4l/vidioc-streamon.rst
new file mode 100644
index 000000000000..13e0136d5c25
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-streamon.rst
@@ -0,0 +1,113 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_STREAMON:
+
+***************************************
+ioctl VIDIOC_STREAMON, VIDIOC_STREAMOFF
+***************************************
+
+Name
+====
+
+VIDIOC_STREAMON - VIDIOC_STREAMOFF - Start or stop streaming I/O
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_STREAMON, const int *argp )
+    :name: VIDIOC_STREAMON
+
+.. c:function:: int ioctl( int fd, VIDIOC_STREAMOFF, const int *argp )
+    :name: VIDIOC_STREAMOFF
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to an integer.
+
+Description
+===========
+
+The ``VIDIOC_STREAMON`` and ``VIDIOC_STREAMOFF`` ioctl start and stop
+the capture or output process during streaming
+(:ref:`memory mapping <mmap>`, :ref:`user pointer <userp>` or
+:ref:`DMABUF <dmabuf>`) I/O.
+
+Capture hardware is disabled and no input buffers are filled (if there
+are any empty buffers in the incoming queue) until ``VIDIOC_STREAMON``
+has been called. Output hardware is disabled and no video signal is
+produced until ``VIDIOC_STREAMON`` has been called. The ioctl will
+succeed when at least one output buffer is in the incoming queue.
+
+Memory-to-memory devices will not start until ``VIDIOC_STREAMON`` has
+been called for both the capture and output stream types.
+
+If ``VIDIOC_STREAMON`` fails then any already queued buffers will remain
+queued.
+
+The ``VIDIOC_STREAMOFF`` ioctl, apart of aborting or finishing any DMA
+in progress, unlocks any user pointer buffers locked in physical memory,
+and it removes all buffers from the incoming and outgoing queues. That
+means all images captured but not dequeued yet will be lost, likewise
+all images enqueued for output but not transmitted yet. I/O returns to
+the same state as after calling
+:ref:`VIDIOC_REQBUFS` and can be restarted
+accordingly.
+
+If buffers have been queued with :ref:`VIDIOC_QBUF` and
+``VIDIOC_STREAMOFF`` is called without ever having called
+``VIDIOC_STREAMON``, then those queued buffers will also be removed from
+the incoming queue and all are returned to the same state as after
+calling :ref:`VIDIOC_REQBUFS` and can be restarted
+accordingly.
+
+Both ioctls take a pointer to an integer, the desired buffer or stream
+type. This is the same as struct
+:c:type:`v4l2_requestbuffers` ``type``.
+
+If ``VIDIOC_STREAMON`` is called when streaming is already in progress,
+or if ``VIDIOC_STREAMOFF`` is called when streaming is already stopped,
+then 0 is returned. Nothing happens in the case of ``VIDIOC_STREAMON``,
+but ``VIDIOC_STREAMOFF`` will return queued buffers to their starting
+state as mentioned above.
+
+.. note::
+
+   Applications can be preempted for unknown periods right before
+   or after the ``VIDIOC_STREAMON`` or ``VIDIOC_STREAMOFF`` calls, there is
+   no notion of starting or stopping "now". Buffer timestamps can be used
+   to synchronize with other events.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The buffer ``type`` is not supported, or no buffers have been
+    allocated (memory mapping) or enqueued (output) yet.
+
+EPIPE
+    The driver implements
+    :ref:`pad-level format configuration <pad-level-formats>` and the
+    pipeline configuration is invalid.
+
+ENOLINK
+    The driver implements Media Controller interface and the pipeline
+    link configuration is invalid.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
new file mode 100644
index 000000000000..3527745935c7
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
@@ -0,0 +1,120 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL:
+
+***************************************
+ioctl VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL
+***************************************
+
+Name
+====
+
+VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL - Enumerate frame intervals
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL, struct v4l2_subdev_frame_interval_enum * argp )
+    :name: VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_subdev_frame_interval_enum`.
+
+
+Description
+===========
+
+This ioctl lets applications enumerate available frame intervals on a
+given sub-device pad. Frame intervals only makes sense for sub-devices
+that can control the frame period on their own. This includes, for
+instance, image sensors and TV tuners.
+
+For the common use case of image sensors, the frame intervals available
+on the sub-device output pad depend on the frame format and size on the
+same pad. Applications must thus specify the desired format and size
+when enumerating frame intervals.
+
+To enumerate frame intervals applications initialize the ``index``,
+``pad``, ``which``, ``code``, ``width`` and ``height`` fields of struct
+:c:type:`v4l2_subdev_frame_interval_enum`
+and call the :ref:`VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL` ioctl with a pointer
+to this structure. Drivers fill the rest of the structure or return an
+EINVAL error code if one of the input fields is invalid. All frame
+intervals are enumerable by beginning at index zero and incrementing by
+one until ``EINVAL`` is returned.
+
+Available frame intervals may depend on the current 'try' formats at
+other pads of the sub-device, as well as on the current active links.
+See :ref:`VIDIOC_SUBDEV_G_FMT` for more
+information about the try formats.
+
+Sub-devices that support the frame interval enumeration ioctl should
+implemented it on a single pad only. Its behaviour when supported on
+multiple pads of the same sub-device is not defined.
+
+.. c:type:: v4l2_subdev_frame_interval_enum
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_subdev_frame_interval_enum
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - Number of the format in the enumeration, set by the application.
+    * - __u32
+      - ``pad``
+      - Pad number as reported by the media controller API.
+    * - __u32
+      - ``code``
+      - The media bus format code, as defined in
+	:ref:`v4l2-mbus-format`.
+    * - __u32
+      - ``width``
+      - Frame width, in pixels.
+    * - __u32
+      - ``height``
+      - Frame height, in pixels.
+    * - struct :c:type:`v4l2_fract`
+      - ``interval``
+      - Period, in seconds, between consecutive video frames.
+    * - __u32
+      - ``which``
+      - Frame intervals to be enumerated, from enum
+	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+    * - __u32
+      - ``reserved``\ [8]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct
+    :c:type:`v4l2_subdev_frame_interval_enum`
+    ``pad`` references a non-existing pad, one of the ``code``,
+    ``width`` or ``height`` fields are invalid for the given pad or the
+    ``index`` field is out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
new file mode 100644
index 000000000000..eb7401991d02
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
@@ -0,0 +1,125 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_SUBDEV_ENUM_FRAME_SIZE:
+
+***********************************
+ioctl VIDIOC_SUBDEV_ENUM_FRAME_SIZE
+***********************************
+
+Name
+====
+
+VIDIOC_SUBDEV_ENUM_FRAME_SIZE - Enumerate media bus frame sizes
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, struct v4l2_subdev_frame_size_enum * argp )
+    :name: VIDIOC_SUBDEV_ENUM_FRAME_SIZE
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_subdev_frame_size_enum`.
+
+
+Description
+===========
+
+This ioctl allows applications to enumerate all frame sizes supported by
+a sub-device on the given pad for the given media bus format. Supported
+formats can be retrieved with the
+:ref:`VIDIOC_SUBDEV_ENUM_MBUS_CODE`
+ioctl.
+
+To enumerate frame sizes applications initialize the ``pad``, ``which``
+, ``code`` and ``index`` fields of the struct
+:c:type:`v4l2_subdev_mbus_code_enum` and
+call the :ref:`VIDIOC_SUBDEV_ENUM_FRAME_SIZE` ioctl with a pointer to the
+structure. Drivers fill the minimum and maximum frame sizes or return an
+EINVAL error code if one of the input parameters is invalid.
+
+Sub-devices that only support discrete frame sizes (such as most
+sensors) will return one or more frame sizes with identical minimum and
+maximum values.
+
+Not all possible sizes in given [minimum, maximum] ranges need to be
+supported. For instance, a scaler that uses a fixed-point scaling ratio
+might not be able to produce every frame size between the minimum and
+maximum values. Applications must use the
+:ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctl to try the
+sub-device for an exact supported frame size.
+
+Available frame sizes may depend on the current 'try' formats at other
+pads of the sub-device, as well as on the current active links and the
+current values of V4L2 controls. See
+:ref:`VIDIOC_SUBDEV_G_FMT` for more
+information about try formats.
+
+
+.. c:type:: v4l2_subdev_frame_size_enum
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_subdev_frame_size_enum
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``index``
+      - Number of the format in the enumeration, set by the application.
+    * - __u32
+      - ``pad``
+      - Pad number as reported by the media controller API.
+    * - __u32
+      - ``code``
+      - The media bus format code, as defined in
+	:ref:`v4l2-mbus-format`.
+    * - __u32
+      - ``min_width``
+      - Minimum frame width, in pixels.
+    * - __u32
+      - ``max_width``
+      - Maximum frame width, in pixels.
+    * - __u32
+      - ``min_height``
+      - Minimum frame height, in pixels.
+    * - __u32
+      - ``max_height``
+      - Maximum frame height, in pixels.
+    * - __u32
+      - ``which``
+      - Frame sizes to be enumerated, from enum
+	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+    * - __u32
+      - ``reserved``\ [8]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct
+    :c:type:`v4l2_subdev_frame_size_enum`
+    ``pad`` references a non-existing pad, the ``code`` is invalid for
+    the given pad or the ``index`` field is out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
new file mode 100644
index 000000000000..35b8607203a4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
@@ -0,0 +1,98 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_SUBDEV_ENUM_MBUS_CODE:
+
+**********************************
+ioctl VIDIOC_SUBDEV_ENUM_MBUS_CODE
+**********************************
+
+Name
+====
+
+VIDIOC_SUBDEV_ENUM_MBUS_CODE - Enumerate media bus formats
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUM_MBUS_CODE, struct v4l2_subdev_mbus_code_enum * argp )
+    :name: VIDIOC_SUBDEV_ENUM_MBUS_CODE
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_subdev_mbus_code_enum`.
+
+
+Description
+===========
+
+To enumerate media bus formats available at a given sub-device pad
+applications initialize the ``pad``, ``which`` and ``index`` fields of
+struct
+:c:type:`v4l2_subdev_mbus_code_enum` and
+call the :ref:`VIDIOC_SUBDEV_ENUM_MBUS_CODE` ioctl with a pointer to this
+structure. Drivers fill the rest of the structure or return an ``EINVAL``
+error code if either the ``pad`` or ``index`` are invalid. All media bus
+formats are enumerable by beginning at index zero and incrementing by
+one until ``EINVAL`` is returned.
+
+Available media bus formats may depend on the current 'try' formats at
+other pads of the sub-device, as well as on the current active links.
+See :ref:`VIDIOC_SUBDEV_G_FMT` for more
+information about the try formats.
+
+
+.. c:type:: v4l2_subdev_mbus_code_enum
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_subdev_mbus_code_enum
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``pad``
+      - Pad number as reported by the media controller API.
+    * - __u32
+      - ``index``
+      - Number of the format in the enumeration, set by the application.
+    * - __u32
+      - ``code``
+      - The media bus format code, as defined in
+	:ref:`v4l2-mbus-format`.
+    * - __u32
+      - ``which``
+      - Media bus format codes to be enumerated, from enum
+	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+    * - __u32
+      - ``reserved``\ [8]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct
+    :c:type:`v4l2_subdev_mbus_code_enum`
+    ``pad`` references a non-existing pad, or the ``index`` field is out
+    of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
new file mode 100644
index 000000000000..8d9fc13015a6
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
@@ -0,0 +1,125 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_SUBDEV_G_CROP:
+
+************************************************
+ioctl VIDIOC_SUBDEV_G_CROP, VIDIOC_SUBDEV_S_CROP
+************************************************
+
+Name
+====
+
+VIDIOC_SUBDEV_G_CROP - VIDIOC_SUBDEV_S_CROP - Get or set the crop rectangle on a subdev pad
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_CROP, struct v4l2_subdev_crop *argp )
+    :name: VIDIOC_SUBDEV_G_CROP
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_CROP, const struct v4l2_subdev_crop *argp )
+    :name: VIDIOC_SUBDEV_S_CROP
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_subdev_crop`.
+
+
+Description
+===========
+
+.. note::
+
+    This is an :ref:`obsolete` interface and may be removed
+    in the future. It is superseded by
+    :ref:`the selection API <VIDIOC_SUBDEV_G_SELECTION>`.
+
+To retrieve the current crop rectangle applications set the ``pad``
+field of a struct :c:type:`v4l2_subdev_crop` to the
+desired pad number as reported by the media API and the ``which`` field
+to ``V4L2_SUBDEV_FORMAT_ACTIVE``. They then call the
+``VIDIOC_SUBDEV_G_CROP`` ioctl with a pointer to this structure. The
+driver fills the members of the ``rect`` field or returns ``EINVAL`` error
+code if the input arguments are invalid, or if cropping is not supported
+on the given pad.
+
+To change the current crop rectangle applications set both the ``pad``
+and ``which`` fields and all members of the ``rect`` field. They then
+call the ``VIDIOC_SUBDEV_S_CROP`` ioctl with a pointer to this
+structure. The driver verifies the requested crop rectangle, adjusts it
+based on the hardware capabilities and configures the device. Upon
+return the struct :c:type:`v4l2_subdev_crop`
+contains the current format as would be returned by a
+``VIDIOC_SUBDEV_G_CROP`` call.
+
+Applications can query the device capabilities by setting the ``which``
+to ``V4L2_SUBDEV_FORMAT_TRY``. When set, 'try' crop rectangles are not
+applied to the device by the driver, but are mangled exactly as active
+crop rectangles and stored in the sub-device file handle. Two
+applications querying the same sub-device would thus not interact with
+each other.
+
+Drivers must not return an error solely because the requested crop
+rectangle doesn't match the device capabilities. They must instead
+modify the rectangle to match what the hardware can provide. The
+modified format should be as close as possible to the original request.
+
+
+.. c:type:: v4l2_subdev_crop
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_subdev_crop
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``pad``
+      - Pad number as reported by the media framework.
+    * - __u32
+      - ``which``
+      - Crop rectangle to get or set, from enum
+	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+    * - struct :c:type:`v4l2_rect`
+      - ``rect``
+      - Crop rectangle boundaries, in pixels.
+    * - __u32
+      - ``reserved``\ [8]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EBUSY
+    The crop rectangle can't be changed because the pad is currently
+    busy. This can be caused, for instance, by an active video stream on
+    the pad. The ioctl must not be retried without performing another
+    action to fix the problem first. Only returned by
+    ``VIDIOC_SUBDEV_S_CROP``
+
+EINVAL
+    The struct :c:type:`v4l2_subdev_crop` ``pad``
+    references a non-existing pad, the ``which`` field references a
+    non-existing format, or cropping is not supported on the given
+    subdev pad.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
new file mode 100644
index 000000000000..69d60e18664b
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
@@ -0,0 +1,154 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_SUBDEV_G_FMT:
+
+**********************************************
+ioctl VIDIOC_SUBDEV_G_FMT, VIDIOC_SUBDEV_S_FMT
+**********************************************
+
+Name
+====
+
+VIDIOC_SUBDEV_G_FMT - VIDIOC_SUBDEV_S_FMT - Get or set the data format on a subdev pad
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_FMT, struct v4l2_subdev_format *argp )
+    :name: VIDIOC_SUBDEV_G_FMT
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_FMT, struct v4l2_subdev_format *argp )
+    :name: VIDIOC_SUBDEV_S_FMT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_subdev_format`.
+
+
+Description
+===========
+
+These ioctls are used to negotiate the frame format at specific subdev
+pads in the image pipeline.
+
+To retrieve the current format applications set the ``pad`` field of a
+struct :c:type:`v4l2_subdev_format` to the desired
+pad number as reported by the media API and the ``which`` field to
+``V4L2_SUBDEV_FORMAT_ACTIVE``. When they call the
+``VIDIOC_SUBDEV_G_FMT`` ioctl with a pointer to this structure the
+driver fills the members of the ``format`` field.
+
+To change the current format applications set both the ``pad`` and
+``which`` fields and all members of the ``format`` field. When they call
+the ``VIDIOC_SUBDEV_S_FMT`` ioctl with a pointer to this structure the
+driver verifies the requested format, adjusts it based on the hardware
+capabilities and configures the device. Upon return the struct
+:c:type:`v4l2_subdev_format` contains the current
+format as would be returned by a ``VIDIOC_SUBDEV_G_FMT`` call.
+
+Applications can query the device capabilities by setting the ``which``
+to ``V4L2_SUBDEV_FORMAT_TRY``. When set, 'try' formats are not applied
+to the device by the driver, but are changed exactly as active formats
+and stored in the sub-device file handle. Two applications querying the
+same sub-device would thus not interact with each other.
+
+For instance, to try a format at the output pad of a sub-device,
+applications would first set the try format at the sub-device input with
+the ``VIDIOC_SUBDEV_S_FMT`` ioctl. They would then either retrieve the
+default format at the output pad with the ``VIDIOC_SUBDEV_G_FMT`` ioctl,
+or set the desired output pad format with the ``VIDIOC_SUBDEV_S_FMT``
+ioctl and check the returned value.
+
+Try formats do not depend on active formats, but can depend on the
+current links configuration or sub-device controls value. For instance,
+a low-pass noise filter might crop pixels at the frame boundaries,
+modifying its output frame size.
+
+Drivers must not return an error solely because the requested format
+doesn't match the device capabilities. They must instead modify the
+format to match what the hardware can provide. The modified format
+should be as close as possible to the original request.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_subdev_format
+
+.. flat-table:: struct v4l2_subdev_format
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``pad``
+      - Pad number as reported by the media controller API.
+    * - __u32
+      - ``which``
+      - Format to modified, from enum
+	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+    * - struct :c:type:`v4l2_mbus_framefmt`
+      - ``format``
+      - Definition of an image format, see :c:type:`v4l2_mbus_framefmt` for
+	details.
+    * - __u32
+      - ``reserved``\ [8]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _v4l2-subdev-format-whence:
+
+.. flat-table:: enum v4l2_subdev_format_whence
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - V4L2_SUBDEV_FORMAT_TRY
+      - 0
+      - Try formats, used for querying device capabilities.
+    * - V4L2_SUBDEV_FORMAT_ACTIVE
+      - 1
+      - Active formats, applied to the hardware.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EBUSY
+    The format can't be changed because the pad is currently busy. This
+    can be caused, for instance, by an active video stream on the pad.
+    The ioctl must not be retried without performing another action to
+    fix the problem first. Only returned by ``VIDIOC_SUBDEV_S_FMT``
+
+EINVAL
+    The struct :c:type:`v4l2_subdev_format`
+    ``pad`` references a non-existing pad, or the ``which`` field
+    references a non-existing format.
+
+
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
new file mode 100644
index 000000000000..b61baaf11624
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
@@ -0,0 +1,120 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_SUBDEV_G_FRAME_INTERVAL:
+
+********************************************************************
+ioctl VIDIOC_SUBDEV_G_FRAME_INTERVAL, VIDIOC_SUBDEV_S_FRAME_INTERVAL
+********************************************************************
+
+Name
+====
+
+VIDIOC_SUBDEV_G_FRAME_INTERVAL - VIDIOC_SUBDEV_S_FRAME_INTERVAL - Get or set the frame interval on a subdev pad
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_FRAME_INTERVAL, struct v4l2_subdev_frame_interval *argp )
+    :name: VIDIOC_SUBDEV_G_FRAME_INTERVAL
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_FRAME_INTERVAL, struct v4l2_subdev_frame_interval *argp )
+    :name: VIDIOC_SUBDEV_S_FRAME_INTERVAL
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_subdev_frame_interval`.
+
+
+Description
+===========
+
+These ioctls are used to get and set the frame interval at specific
+subdev pads in the image pipeline. The frame interval only makes sense
+for sub-devices that can control the frame period on their own. This
+includes, for instance, image sensors and TV tuners. Sub-devices that
+don't support frame intervals must not implement these ioctls.
+
+To retrieve the current frame interval applications set the ``pad``
+field of a struct
+:c:type:`v4l2_subdev_frame_interval` to
+the desired pad number as reported by the media controller API. When
+they call the ``VIDIOC_SUBDEV_G_FRAME_INTERVAL`` ioctl with a pointer to
+this structure the driver fills the members of the ``interval`` field.
+
+To change the current frame interval applications set both the ``pad``
+field and all members of the ``interval`` field. When they call the
+``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` ioctl with a pointer to this
+structure the driver verifies the requested interval, adjusts it based
+on the hardware capabilities and configures the device. Upon return the
+struct
+:c:type:`v4l2_subdev_frame_interval`
+contains the current frame interval as would be returned by a
+``VIDIOC_SUBDEV_G_FRAME_INTERVAL`` call.
+
+Drivers must not return an error solely because the requested interval
+doesn't match the device capabilities. They must instead modify the
+interval to match what the hardware can provide. The modified interval
+should be as close as possible to the original request.
+
+Changing the frame interval shall never change the format. Changing the
+format, on the other hand, may change the frame interval.
+
+Sub-devices that support the frame interval ioctls should implement them
+on a single pad only. Their behaviour when supported on multiple pads of
+the same sub-device is not defined.
+
+
+.. c:type:: v4l2_subdev_frame_interval
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_subdev_frame_interval
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``pad``
+      - Pad number as reported by the media controller API.
+    * - struct :c:type:`v4l2_fract`
+      - ``interval``
+      - Period, in seconds, between consecutive video frames.
+    * - __u32
+      - ``reserved``\ [9]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EBUSY
+    The frame interval can't be changed because the pad is currently
+    busy. This can be caused, for instance, by an active video stream on
+    the pad. The ioctl must not be retried without performing another
+    action to fix the problem first. Only returned by
+    ``VIDIOC_SUBDEV_S_FRAME_INTERVAL``
+
+EINVAL
+    The struct
+    :c:type:`v4l2_subdev_frame_interval`
+    ``pad`` references a non-existing pad, or the pad doesn't support
+    frame intervals.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
new file mode 100644
index 000000000000..981c95df2dec
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
@@ -0,0 +1,125 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_SUBDEV_G_SELECTION:
+
+**********************************************************
+ioctl VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION
+**********************************************************
+
+Name
+====
+
+VIDIOC_SUBDEV_G_SELECTION - VIDIOC_SUBDEV_S_SELECTION - Get or set selection rectangles on a subdev pad
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_SELECTION, struct v4l2_subdev_selection *argp )
+    :name: VIDIOC_SUBDEV_G_SELECTION
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_SELECTION, struct v4l2_subdev_selection *argp )
+    :name: VIDIOC_SUBDEV_S_SELECTION
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_subdev_selection`.
+
+
+Description
+===========
+
+The selections are used to configure various image processing
+functionality performed by the subdevs which affect the image size. This
+currently includes cropping, scaling and composition.
+
+The selection API replaces
+:ref:`the old subdev crop API <VIDIOC_SUBDEV_G_CROP>`. All the
+function of the crop API, and more, are supported by the selections API.
+
+See :ref:`subdev` for more information on how each selection target
+affects the image processing pipeline inside the subdevice.
+
+
+Types of selection targets
+--------------------------
+
+There are two types of selection targets: actual and bounds. The actual
+targets are the targets which configure the hardware. The BOUNDS target
+will return a rectangle that contain all possible actual rectangles.
+
+
+Discovering supported features
+------------------------------
+
+To discover which targets are supported, the user can perform
+``VIDIOC_SUBDEV_G_SELECTION`` on them. Any unsupported target will
+return ``EINVAL``.
+
+Selection targets and flags are documented in
+:ref:`v4l2-selections-common`.
+
+
+.. c:type:: v4l2_subdev_selection
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: struct v4l2_subdev_selection
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``which``
+      - Active or try selection, from enum
+	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+    * - __u32
+      - ``pad``
+      - Pad number as reported by the media framework.
+    * - __u32
+      - ``target``
+      - Target selection rectangle. See :ref:`v4l2-selections-common`.
+    * - __u32
+      - ``flags``
+      - Flags. See :ref:`v4l2-selection-flags`.
+    * - struct :c:type:`v4l2_rect`
+      - ``r``
+      - Selection rectangle, in pixels.
+    * - __u32
+      - ``reserved``\ [8]
+      - Reserved for future extensions. Applications and drivers must set
+	the array to zero.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EBUSY
+    The selection rectangle can't be changed because the pad is
+    currently busy. This can be caused, for instance, by an active video
+    stream on the pad. The ioctl must not be retried without performing
+    another action to fix the problem first. Only returned by
+    ``VIDIOC_SUBDEV_S_SELECTION``
+
+EINVAL
+    The struct :c:type:`v4l2_subdev_selection`
+    ``pad`` references a non-existing pad, the ``which`` field
+    references a non-existing format, or the selection target is not
+    supported on the given subdev pad.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst b/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst
new file mode 100644
index 000000000000..ae3ed73c0a9e
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst
@@ -0,0 +1,123 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _VIDIOC_SUBSCRIBE_EVENT:
+.. _VIDIOC_UNSUBSCRIBE_EVENT:
+
+******************************************************
+ioctl VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT
+******************************************************
+
+Name
+====
+
+VIDIOC_SUBSCRIBE_EVENT - VIDIOC_UNSUBSCRIBE_EVENT - Subscribe or unsubscribe event
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBSCRIBE_EVENT, struct v4l2_event_subscription *argp )
+    :name: VIDIOC_SUBSCRIBE_EVENT
+
+.. c:function:: int ioctl( int fd, VIDIOC_UNSUBSCRIBE_EVENT, struct v4l2_event_subscription *argp )
+    :name: VIDIOC_UNSUBSCRIBE_EVENT
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_event_subscription`.
+
+
+Description
+===========
+
+Subscribe or unsubscribe V4L2 event. Subscribed events are dequeued by
+using the :ref:`VIDIOC_DQEVENT` ioctl.
+
+
+.. tabularcolumns:: |p{4.6cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_event_subscription
+
+.. flat-table:: struct v4l2_event_subscription
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Type of the event, see :ref:`event-type`.
+
+	.. note::
+
+	   ``V4L2_EVENT_ALL`` can be used with
+	   :ref:`VIDIOC_UNSUBSCRIBE_EVENT <VIDIOC_SUBSCRIBE_EVENT>` for
+	   unsubscribing all events at once.
+    * - __u32
+      - ``id``
+      - ID of the event source. If there is no ID associated with the
+	event source, then set this to 0. Whether or not an event needs an
+	ID depends on the event type.
+    * - __u32
+      - ``flags``
+      - Event flags, see :ref:`event-flags`.
+    * - __u32
+      - ``reserved``\ [5]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+
+.. tabularcolumns:: |p{6.8cm}|p{2.2cm}|p{8.5cm}|
+
+.. _event-flags:
+
+.. flat-table:: Event Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_EVENT_SUB_FL_SEND_INITIAL``
+      - 0x0001
+      - When this event is subscribed an initial event will be sent
+	containing the current status. This only makes sense for events
+	that are triggered by a status change such as ``V4L2_EVENT_CTRL``.
+	Other events will ignore this flag.
+    * - ``V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK``
+      - 0x0002
+      - If set, then events directly caused by an ioctl will also be sent
+	to the filehandle that called that ioctl. For example, changing a
+	control using :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` will cause
+	a V4L2_EVENT_CTRL to be sent back to that same filehandle.
+	Normally such events are suppressed to prevent feedback loops
+	where an application changes a control to a one value and then
+	another, and then receives an event telling it that that control
+	has changed to the first value.
+
+	Since it can't tell whether that event was caused by another
+	application or by the :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>`
+	call it is hard to decide whether to set the control to the value
+	in the event, or ignore it.
+
+	Think carefully when you set this flag so you won't get into
+	situations like that.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/v4l/yuv-formats.rst b/Documentation/userspace-api/media/v4l/yuv-formats.rst
new file mode 100644
index 000000000000..8ee92d0cd769
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/yuv-formats.rst
@@ -0,0 +1,64 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _yuv-formats:
+
+***********
+YUV Formats
+***********
+
+YUV is the format native to TV broadcast and composite video signals. It
+separates the brightness information (Y) from the color information (U
+and V or Cb and Cr). The color information consists of red and blue
+*color difference* signals, this way the green component can be
+reconstructed by subtracting from the brightness component. See
+:ref:`colorspaces` for conversion examples. YUV was chosen because
+early television would only transmit brightness information. To add
+color in a way compatible with existing receivers a new signal carrier
+was added to transmit the color difference signals. Secondary in the YUV
+format the U and V components usually have lower resolution than the Y
+component. This is an analog video compression technique taking
+advantage of a property of the human visual system, being more sensitive
+to brightness information.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    pixfmt-packed-yuv
+    pixfmt-grey
+    pixfmt-y10
+    pixfmt-y12
+    pixfmt-y14
+    pixfmt-y10b
+    pixfmt-y10p
+    pixfmt-y16
+    pixfmt-y16-be
+    pixfmt-y8i
+    pixfmt-y12i
+    pixfmt-uv8
+    pixfmt-yuyv
+    pixfmt-uyvy
+    pixfmt-yvyu
+    pixfmt-vyuy
+    pixfmt-y41p
+    pixfmt-yuv420
+    pixfmt-yuv420m
+    pixfmt-yuv422m
+    pixfmt-yuv444m
+    pixfmt-yuv410
+    pixfmt-yuv422p
+    pixfmt-yuv411p
+    pixfmt-nv12
+    pixfmt-nv12m
+    pixfmt-nv12mt
+    pixfmt-nv16
+    pixfmt-nv16m
+    pixfmt-nv24
+    pixfmt-m420
diff --git a/Documentation/userspace-api/media/video.h.rst.exceptions b/Documentation/userspace-api/media/video.h.rst.exceptions
new file mode 100644
index 000000000000..ea9de59ad8b7
--- /dev/null
+++ b/Documentation/userspace-api/media/video.h.rst.exceptions
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define _UAPI_DVBVIDEO_H_
+
+# This is a deprecated obscure API. Just ignore things we don't know
+ignore define VIDEO_CMD_PLAY
+ignore define VIDEO_CMD_STOP
+ignore define VIDEO_CMD_FREEZE
+ignore define VIDEO_CMD_CONTINUE
+ignore define VIDEO_CMD_FREEZE_TO_BLACK
+ignore define VIDEO_CMD_STOP_TO_BLACK
+ignore define VIDEO_CMD_STOP_IMMEDIATELY
+ignore define VIDEO_PLAY_FMT_NONE
+ignore define VIDEO_PLAY_FMT_GOP
+ignore define VIDEO_VSYNC_FIELD_UNKNOWN
+ignore define VIDEO_VSYNC_FIELD_ODD
+ignore define VIDEO_VSYNC_FIELD_EVEN
+ignore define VIDEO_VSYNC_FIELD_PROGRESSIVE
+ignore define VIDEO_EVENT_SIZE_CHANGED
+ignore define VIDEO_EVENT_FRAME_RATE_CHANGED
+ignore define VIDEO_EVENT_DECODER_STOPPED
+ignore define VIDEO_EVENT_VSYNC
+ignore define VIDEO_CAP_MPEG1
+ignore define VIDEO_CAP_MPEG2
+ignore define VIDEO_CAP_SYS
+ignore define VIDEO_CAP_PROG
+ignore define VIDEO_CAP_SPU
+ignore define VIDEO_CAP_NAVI
+ignore define VIDEO_CAP_CSS
+
+# some typedefs should point to struct/enums
+replace typedef video_format_t :c:type:`video_format`
+replace typedef video_system_t :c:type:`video_system`
+replace typedef video_displayformat_t :c:type:`video_displayformat`
+replace typedef video_size_t :c:type:`video_size`
+replace typedef video_stream_source_t :c:type:`video_stream_source`
+replace typedef video_play_state_t :c:type:`video_play_state`
+replace typedef video_navi_pack_t :c:type:`video_navi_pack`
diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
new file mode 100644
index 000000000000..cb6ccf91776e
--- /dev/null
+++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
@@ -0,0 +1,572 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Ignore header name
+ignore define _UAPI__LINUX_VIDEODEV2_H
+
+#
+# The cross reference valitator for videodev2.h DocBook never cared
+# about enum symbols or defines. Yet, they're all (or almost all?)
+# handled inside V4L API sections. So, for now, it is safe to just
+# ignore. This should be revisited, as validating it helps to avoid
+# having something not documented at the uAPI.
+#
+
+# Those symbols should not be used by uAPI - don't document them
+ignore symbol V4L2_BUF_TYPE_PRIVATE
+ignore symbol V4L2_TUNER_DIGITAL_TV
+ignore symbol V4L2_COLORSPACE_BT878
+
+# Documented enum v4l2_field
+replace symbol V4L2_FIELD_ALTERNATE :c:type:`v4l2_field`
+replace symbol V4L2_FIELD_ANY :c:type:`v4l2_field`
+replace symbol V4L2_FIELD_BOTTOM :c:type:`v4l2_field`
+replace symbol V4L2_FIELD_INTERLACED :c:type:`v4l2_field`
+replace symbol V4L2_FIELD_INTERLACED_BT :c:type:`v4l2_field`
+replace symbol V4L2_FIELD_INTERLACED_TB :c:type:`v4l2_field`
+replace symbol V4L2_FIELD_NONE :c:type:`v4l2_field`
+replace symbol V4L2_FIELD_SEQ_BT :c:type:`v4l2_field`
+replace symbol V4L2_FIELD_SEQ_TB :c:type:`v4l2_field`
+replace symbol V4L2_FIELD_TOP :c:type:`v4l2_field`
+
+# Documented enum v4l2_buf_type
+replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_META_OUTPUT :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_SDR_OUTPUT :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_SLICED_VBI_CAPTURE :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_SLICED_VBI_OUTPUT :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_VBI_CAPTURE :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_VBI_OUTPUT :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_VIDEO_CAPTURE :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY :c:type:`v4l2_buf_type`
+replace symbol V4L2_BUF_TYPE_VIDEO_OVERLAY :c:type:`v4l2_buf_type`
+
+# Documented enum v4l2_tuner_type
+replace symbol V4L2_TUNER_ANALOG_TV :c:type:`v4l2_tuner_type`
+replace symbol V4L2_TUNER_RADIO :c:type:`v4l2_tuner_type`
+replace symbol V4L2_TUNER_RF :c:type:`v4l2_tuner_type`
+replace symbol V4L2_TUNER_SDR :c:type:`v4l2_tuner_type`
+
+# Documented enum v4l2_memory
+replace symbol V4L2_MEMORY_DMABUF :c:type:`v4l2_memory`
+replace symbol V4L2_MEMORY_MMAP :c:type:`v4l2_memory`
+replace symbol V4L2_MEMORY_OVERLAY :c:type:`v4l2_memory`
+replace symbol V4L2_MEMORY_USERPTR :c:type:`v4l2_memory`
+
+# Documented enum v4l2_colorspace
+replace symbol V4L2_COLORSPACE_470_SYSTEM_BG :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_470_SYSTEM_M :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_OPRGB :c:type:`v4l2_colorspace`
+replace define V4L2_COLORSPACE_ADOBERGB :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_BT2020 :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_DCI_P3 :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_DEFAULT :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_JPEG :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_RAW :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_REC709 :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_SMPTE170M :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_SMPTE240M :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_SRGB :c:type:`v4l2_colorspace`
+
+# Documented enum v4l2_xfer_func
+replace symbol V4L2_XFER_FUNC_709 :c:type:`v4l2_xfer_func`
+replace symbol V4L2_XFER_FUNC_OPRGB :c:type:`v4l2_xfer_func`
+replace define V4L2_XFER_FUNC_ADOBERGB :c:type:`v4l2_xfer_func`
+replace symbol V4L2_XFER_FUNC_DCI_P3 :c:type:`v4l2_xfer_func`
+replace symbol V4L2_XFER_FUNC_DEFAULT :c:type:`v4l2_xfer_func`
+replace symbol V4L2_XFER_FUNC_NONE :c:type:`v4l2_xfer_func`
+replace symbol V4L2_XFER_FUNC_SMPTE2084 :c:type:`v4l2_xfer_func`
+replace symbol V4L2_XFER_FUNC_SMPTE240M :c:type:`v4l2_xfer_func`
+replace symbol V4L2_XFER_FUNC_SRGB :c:type:`v4l2_xfer_func`
+
+# Documented enum v4l2_ycbcr_encoding
+replace symbol V4L2_YCBCR_ENC_601 :c:type:`v4l2_ycbcr_encoding`
+replace symbol V4L2_YCBCR_ENC_709 :c:type:`v4l2_ycbcr_encoding`
+replace symbol V4L2_YCBCR_ENC_BT2020 :c:type:`v4l2_ycbcr_encoding`
+replace symbol V4L2_YCBCR_ENC_BT2020_CONST_LUM :c:type:`v4l2_ycbcr_encoding`
+replace symbol V4L2_YCBCR_ENC_DEFAULT :c:type:`v4l2_ycbcr_encoding`
+replace symbol V4L2_YCBCR_ENC_SYCC :c:type:`v4l2_ycbcr_encoding`
+replace symbol V4L2_YCBCR_ENC_XV601 :c:type:`v4l2_ycbcr_encoding`
+replace symbol V4L2_YCBCR_ENC_XV709 :c:type:`v4l2_ycbcr_encoding`
+replace symbol V4L2_YCBCR_ENC_SMPTE240M :c:type:`v4l2_ycbcr_encoding`
+
+# Documented enum v4l2_hsv_encoding
+replace symbol V4L2_HSV_ENC_180 :c:type:`v4l2_hsv_encoding`
+replace symbol V4L2_HSV_ENC_256 :c:type:`v4l2_hsv_encoding`
+
+# Documented enum v4l2_quantization
+replace symbol V4L2_QUANTIZATION_DEFAULT :c:type:`v4l2_quantization`
+replace symbol V4L2_QUANTIZATION_FULL_RANGE :c:type:`v4l2_quantization`
+replace symbol V4L2_QUANTIZATION_LIM_RANGE :c:type:`v4l2_quantization`
+
+# Documented enum v4l2_priority
+replace symbol V4L2_PRIORITY_BACKGROUND :c:type:`v4l2_priority`
+replace symbol V4L2_PRIORITY_DEFAULT :c:type:`v4l2_priority`
+replace symbol V4L2_PRIORITY_INTERACTIVE :c:type:`v4l2_priority`
+replace symbol V4L2_PRIORITY_RECORD :c:type:`v4l2_priority`
+replace symbol V4L2_PRIORITY_UNSET :c:type:`v4l2_priority`
+
+# Documented enum v4l2_frmsizetypes
+replace symbol V4L2_FRMSIZE_TYPE_CONTINUOUS :c:type:`v4l2_frmsizetypes`
+replace symbol V4L2_FRMSIZE_TYPE_DISCRETE :c:type:`v4l2_frmsizetypes`
+replace symbol V4L2_FRMSIZE_TYPE_STEPWISE :c:type:`v4l2_frmsizetypes`
+
+# Documented enum frmivaltypes
+replace symbol V4L2_FRMIVAL_TYPE_CONTINUOUS :c:type:`v4l2_frmivaltypes`
+replace symbol V4L2_FRMIVAL_TYPE_DISCRETE :c:type:`v4l2_frmivaltypes`
+replace symbol V4L2_FRMIVAL_TYPE_STEPWISE :c:type:`v4l2_frmivaltypes`
+
+# Documented enum :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_COMPOUND_TYPES vidioc_queryctrl
+
+replace symbol V4L2_CTRL_TYPE_BITMASK :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_BOOLEAN :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_BUTTON :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_CTRL_CLASS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_INTEGER :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_INTEGER64 :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_INTEGER_MENU :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_MENU :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_STRING :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_U16 :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_U32 :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_U8 :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTIZATION :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_SPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_PPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_SCALING_MATRIX :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_DECODE_PARAMS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_HEVC_SPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_AREA :c:type:`v4l2_ctrl_type`
+
+# V4L2 capability defines
+replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities
+replace define V4L2_CAP_VIDEO_CAPTURE_MPLANE device-capabilities
+replace define V4L2_CAP_VIDEO_OUTPUT device-capabilities
+replace define V4L2_CAP_VIDEO_OUTPUT_MPLANE device-capabilities
+replace define V4L2_CAP_VIDEO_M2M device-capabilities
+replace define V4L2_CAP_VIDEO_M2M_MPLANE device-capabilities
+replace define V4L2_CAP_VIDEO_OVERLAY device-capabilities
+replace define V4L2_CAP_VBI_CAPTURE device-capabilities
+replace define V4L2_CAP_VBI_OUTPUT device-capabilities
+replace define V4L2_CAP_SLICED_VBI_CAPTURE device-capabilities
+replace define V4L2_CAP_SLICED_VBI_OUTPUT device-capabilities
+replace define V4L2_CAP_RDS_CAPTURE device-capabilities
+replace define V4L2_CAP_VIDEO_OUTPUT_OVERLAY device-capabilities
+replace define V4L2_CAP_HW_FREQ_SEEK device-capabilities
+replace define V4L2_CAP_RDS_OUTPUT device-capabilities
+replace define V4L2_CAP_TUNER device-capabilities
+replace define V4L2_CAP_AUDIO device-capabilities
+replace define V4L2_CAP_RADIO device-capabilities
+replace define V4L2_CAP_MODULATOR device-capabilities
+replace define V4L2_CAP_SDR_CAPTURE device-capabilities
+replace define V4L2_CAP_EXT_PIX_FORMAT device-capabilities
+replace define V4L2_CAP_SDR_OUTPUT device-capabilities
+replace define V4L2_CAP_META_CAPTURE device-capabilities
+replace define V4L2_CAP_READWRITE device-capabilities
+replace define V4L2_CAP_ASYNCIO device-capabilities
+replace define V4L2_CAP_STREAMING device-capabilities
+replace define V4L2_CAP_META_OUTPUT device-capabilities
+replace define V4L2_CAP_DEVICE_CAPS device-capabilities
+replace define V4L2_CAP_TOUCH device-capabilities
+
+# V4L2 pix flags
+replace define V4L2_PIX_FMT_PRIV_MAGIC :c:type:`v4l2_pix_format`
+replace define V4L2_PIX_FMT_FLAG_PREMUL_ALPHA reserved-formats
+
+# V4L2 format flags
+replace define V4L2_FMT_FLAG_COMPRESSED fmtdesc-flags
+replace define V4L2_FMT_FLAG_EMULATED fmtdesc-flags
+replace define V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM fmtdesc-flags
+replace define V4L2_FMT_FLAG_DYN_RESOLUTION fmtdesc-flags
+
+# V4L2 timecode types
+replace define V4L2_TC_TYPE_24FPS timecode-type
+replace define V4L2_TC_TYPE_25FPS timecode-type
+replace define V4L2_TC_TYPE_30FPS timecode-type
+replace define V4L2_TC_TYPE_50FPS timecode-type
+replace define V4L2_TC_TYPE_60FPS timecode-type
+
+# V4L2 timecode flags
+replace define V4L2_TC_FLAG_DROPFRAME timecode-flags
+replace define V4L2_TC_FLAG_COLORFRAME timecode-flags
+replace define V4L2_TC_USERBITS_field timecode-flags
+replace define V4L2_TC_USERBITS_USERDEFINED timecode-flags
+replace define V4L2_TC_USERBITS_8BITCHARS timecode-flags
+
+# V4L2 JPEG markers
+replace define V4L2_JPEG_MARKER_DHT jpeg-markers
+replace define V4L2_JPEG_MARKER_DQT jpeg-markers
+replace define V4L2_JPEG_MARKER_DRI jpeg-markers
+replace define V4L2_JPEG_MARKER_COM jpeg-markers
+replace define V4L2_JPEG_MARKER_APP jpeg-markers
+
+# V4L2 framebuffer caps and flags
+
+replace define V4L2_FBUF_CAP_EXTERNOVERLAY framebuffer-cap
+replace define V4L2_FBUF_CAP_CHROMAKEY framebuffer-cap
+replace define V4L2_FBUF_CAP_LIST_CLIPPING framebuffer-cap
+replace define V4L2_FBUF_CAP_BITMAP_CLIPPING framebuffer-cap
+replace define V4L2_FBUF_CAP_LOCAL_ALPHA framebuffer-cap
+replace define V4L2_FBUF_CAP_GLOBAL_ALPHA framebuffer-cap
+replace define V4L2_FBUF_CAP_LOCAL_INV_ALPHA framebuffer-cap
+replace define V4L2_FBUF_CAP_SRC_CHROMAKEY framebuffer-cap
+
+replace define V4L2_FBUF_FLAG_PRIMARY framebuffer-flags
+replace define V4L2_FBUF_FLAG_OVERLAY framebuffer-flags
+replace define V4L2_FBUF_FLAG_CHROMAKEY framebuffer-flags
+replace define V4L2_FBUF_FLAG_LOCAL_ALPHA framebuffer-flags
+replace define V4L2_FBUF_FLAG_GLOBAL_ALPHA framebuffer-flags
+replace define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA framebuffer-flags
+replace define V4L2_FBUF_FLAG_SRC_CHROMAKEY framebuffer-flags
+
+# Used on VIDIOC_G_PARM
+
+replace define V4L2_MODE_HIGHQUALITY parm-flags
+replace define V4L2_CAP_TIMEPERFRAME :c:type:`v4l2_captureparm`
+
+# The V4L2_STD_foo are all defined at v4l2_std_id table
+
+replace define V4L2_STD_PAL_B v4l2-std-id
+replace define V4L2_STD_PAL_B1 v4l2-std-id
+replace define V4L2_STD_PAL_G v4l2-std-id
+replace define V4L2_STD_PAL_H v4l2-std-id
+replace define V4L2_STD_PAL_I v4l2-std-id
+replace define V4L2_STD_PAL_D v4l2-std-id
+replace define V4L2_STD_PAL_D1 v4l2-std-id
+replace define V4L2_STD_PAL_K v4l2-std-id
+replace define V4L2_STD_PAL_M v4l2-std-id
+replace define V4L2_STD_PAL_N v4l2-std-id
+replace define V4L2_STD_PAL_Nc v4l2-std-id
+replace define V4L2_STD_PAL_60 v4l2-std-id
+replace define V4L2_STD_NTSC_M v4l2-std-id
+replace define V4L2_STD_NTSC_M_JP v4l2-std-id
+replace define V4L2_STD_NTSC_443 v4l2-std-id
+replace define V4L2_STD_NTSC_M_KR v4l2-std-id
+replace define V4L2_STD_SECAM_B v4l2-std-id
+replace define V4L2_STD_SECAM_D v4l2-std-id
+replace define V4L2_STD_SECAM_G v4l2-std-id
+replace define V4L2_STD_SECAM_H v4l2-std-id
+replace define V4L2_STD_SECAM_K v4l2-std-id
+replace define V4L2_STD_SECAM_K1 v4l2-std-id
+replace define V4L2_STD_SECAM_L v4l2-std-id
+replace define V4L2_STD_SECAM_LC v4l2-std-id
+replace define V4L2_STD_ATSC_8_VSB v4l2-std-id
+replace define V4L2_STD_ATSC_16_VSB v4l2-std-id
+replace define V4L2_STD_NTSC v4l2-std-id
+replace define V4L2_STD_SECAM_DK v4l2-std-id
+replace define V4L2_STD_SECAM v4l2-std-id
+replace define V4L2_STD_PAL_BG v4l2-std-id
+replace define V4L2_STD_PAL_DK v4l2-std-id
+replace define V4L2_STD_PAL v4l2-std-id
+replace define V4L2_STD_B v4l2-std-id
+replace define V4L2_STD_G v4l2-std-id
+replace define V4L2_STD_H v4l2-std-id
+replace define V4L2_STD_L v4l2-std-id
+replace define V4L2_STD_GH v4l2-std-id
+replace define V4L2_STD_DK v4l2-std-id
+replace define V4L2_STD_BG v4l2-std-id
+replace define V4L2_STD_MN v4l2-std-id
+replace define V4L2_STD_MTS v4l2-std-id
+replace define V4L2_STD_525_60 v4l2-std-id
+replace define V4L2_STD_625_50 v4l2-std-id
+replace define V4L2_STD_ATSC v4l2-std-id
+replace define V4L2_STD_UNKNOWN v4l2-std-id
+replace define V4L2_STD_ALL v4l2-std-id
+
+# V4L2 DT BT timings definitions
+
+replace define V4L2_DV_PROGRESSIVE :c:type:`v4l2_bt_timings`
+replace define V4L2_DV_INTERLACED :c:type:`v4l2_bt_timings`
+
+replace define V4L2_DV_VSYNC_POS_POL :c:type:`v4l2_bt_timings`
+replace define V4L2_DV_HSYNC_POS_POL :c:type:`v4l2_bt_timings`
+
+replace define V4L2_DV_BT_STD_CEA861 dv-bt-standards
+replace define V4L2_DV_BT_STD_DMT dv-bt-standards
+replace define V4L2_DV_BT_STD_CVT dv-bt-standards
+replace define V4L2_DV_BT_STD_GTF dv-bt-standards
+replace define V4L2_DV_BT_STD_SDI dv-bt-standards
+
+replace define V4L2_DV_FL_REDUCED_BLANKING dv-bt-standards
+replace define V4L2_DV_FL_CAN_REDUCE_FPS dv-bt-standards
+replace define V4L2_DV_FL_CAN_DETECT_REDUCED_FPS dv-bt-standards
+replace define V4L2_DV_FL_REDUCED_FPS dv-bt-standards
+replace define V4L2_DV_FL_HALF_LINE dv-bt-standards
+replace define V4L2_DV_FL_IS_CE_VIDEO dv-bt-standards
+replace define V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE dv-bt-standards
+replace define V4L2_DV_FL_HAS_PICTURE_ASPECT dv-bt-standards
+replace define V4L2_DV_FL_HAS_CEA861_VIC dv-bt-standards
+replace define V4L2_DV_FL_HAS_HDMI_VIC dv-bt-standards
+
+replace define V4L2_DV_BT_656_1120 dv-timing-types
+
+replace define V4L2_DV_BT_CAP_INTERLACED framebuffer-cap
+replace define V4L2_DV_BT_CAP_PROGRESSIVE framebuffer-cap
+replace define V4L2_DV_BT_CAP_REDUCED_BLANKING framebuffer-cap
+replace define V4L2_DV_BT_CAP_CUSTOM framebuffer-cap
+
+# V4L2 input
+
+replace define V4L2_INPUT_TYPE_TUNER input-type
+replace define V4L2_INPUT_TYPE_CAMERA input-type
+replace define V4L2_INPUT_TYPE_TOUCH input-type
+
+replace define V4L2_IN_ST_NO_POWER input-status
+replace define V4L2_IN_ST_NO_SIGNAL input-status
+replace define V4L2_IN_ST_NO_COLOR input-status
+replace define V4L2_IN_ST_HFLIP input-status
+replace define V4L2_IN_ST_VFLIP input-status
+replace define V4L2_IN_ST_NO_H_LOCK input-status
+replace define V4L2_IN_ST_COLOR_KILL input-status
+replace define V4L2_IN_ST_NO_SYNC input-status
+replace define V4L2_IN_ST_NO_EQU input-status
+replace define V4L2_IN_ST_NO_CARRIER input-status
+replace define V4L2_IN_ST_MACROVISION input-status
+replace define V4L2_IN_ST_NO_ACCESS input-status
+replace define V4L2_IN_ST_VTR input-status
+replace define V4L2_IN_ST_NO_V_LOCK input-status
+replace define V4L2_IN_ST_NO_STD_LOCK input-status
+
+replace define V4L2_IN_CAP_DV_TIMINGS input-capabilities
+replace define V4L2_IN_CAP_STD input-capabilities
+replace define V4L2_IN_CAP_NATIVE_SIZE input-capabilities
+
+# V4L2 output
+
+replace define V4L2_OUTPUT_TYPE_MODULATOR output-type
+replace define V4L2_OUTPUT_TYPE_ANALOG output-type
+replace define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY output-type
+
+replace define V4L2_OUT_CAP_DV_TIMINGS output-capabilities
+replace define V4L2_OUT_CAP_STD output-capabilities
+replace define V4L2_OUT_CAP_NATIVE_SIZE output-capabilities
+
+# V4L2 control flags
+
+replace define V4L2_CTRL_FLAG_DISABLED control-flags
+replace define V4L2_CTRL_FLAG_GRABBED control-flags
+replace define V4L2_CTRL_FLAG_READ_ONLY control-flags
+replace define V4L2_CTRL_FLAG_UPDATE control-flags
+replace define V4L2_CTRL_FLAG_INACTIVE control-flags
+replace define V4L2_CTRL_FLAG_SLIDER control-flags
+replace define V4L2_CTRL_FLAG_WRITE_ONLY control-flags
+replace define V4L2_CTRL_FLAG_VOLATILE control-flags
+replace define V4L2_CTRL_FLAG_HAS_PAYLOAD control-flags
+replace define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE control-flags
+replace define V4L2_CTRL_FLAG_MODIFY_LAYOUT control-flags
+
+replace define V4L2_CTRL_FLAG_NEXT_CTRL control
+replace define V4L2_CTRL_FLAG_NEXT_COMPOUND control
+replace define V4L2_CID_PRIVATE_BASE control
+
+# V4L2 tuner
+
+replace define V4L2_TUNER_CAP_LOW tuner-capability
+replace define V4L2_TUNER_CAP_NORM tuner-capability
+replace define V4L2_TUNER_CAP_HWSEEK_BOUNDED tuner-capability
+replace define V4L2_TUNER_CAP_HWSEEK_WRAP tuner-capability
+replace define V4L2_TUNER_CAP_STEREO tuner-capability
+replace define V4L2_TUNER_CAP_LANG2 tuner-capability
+replace define V4L2_TUNER_CAP_SAP tuner-capability
+replace define V4L2_TUNER_CAP_LANG1 tuner-capability
+replace define V4L2_TUNER_CAP_RDS tuner-capability
+replace define V4L2_TUNER_CAP_RDS_BLOCK_IO tuner-capability
+replace define V4L2_TUNER_CAP_RDS_CONTROLS tuner-capability
+replace define V4L2_TUNER_CAP_FREQ_BANDS tuner-capability
+replace define V4L2_TUNER_CAP_HWSEEK_PROG_LIM tuner-capability
+replace define V4L2_TUNER_CAP_1HZ tuner-capability
+
+replace define V4L2_TUNER_SUB_MONO tuner-rxsubchans
+replace define V4L2_TUNER_SUB_STEREO tuner-rxsubchans
+replace define V4L2_TUNER_SUB_LANG2 tuner-rxsubchans
+replace define V4L2_TUNER_SUB_SAP tuner-rxsubchans
+replace define V4L2_TUNER_SUB_LANG1 tuner-rxsubchans
+replace define V4L2_TUNER_SUB_RDS tuner-rxsubchans
+
+replace define V4L2_TUNER_MODE_MONO tuner-audmode
+replace define V4L2_TUNER_MODE_STEREO tuner-audmode
+replace define V4L2_TUNER_MODE_LANG2 tuner-audmode
+replace define V4L2_TUNER_MODE_SAP tuner-audmode
+replace define V4L2_TUNER_MODE_LANG1 tuner-audmode
+replace define V4L2_TUNER_MODE_LANG1_LANG2 tuner-audmode
+
+replace define V4L2_BAND_MODULATION_VSB band-modulation
+replace define V4L2_BAND_MODULATION_FM band-modulation
+replace define V4L2_BAND_MODULATION_AM band-modulation
+
+replace define V4L2_RDS_BLOCK_MSK v4l2-rds-block
+replace define V4L2_RDS_BLOCK_A v4l2-rds-block
+replace define V4L2_RDS_BLOCK_B v4l2-rds-block
+replace define V4L2_RDS_BLOCK_C v4l2-rds-block
+replace define V4L2_RDS_BLOCK_D v4l2-rds-block
+replace define V4L2_RDS_BLOCK_C_ALT v4l2-rds-block
+replace define V4L2_RDS_BLOCK_INVALID v4l2-rds-block
+replace define V4L2_RDS_BLOCK_CORRECTED v4l2-rds-block
+replace define V4L2_RDS_BLOCK_ERROR v4l2-rds-block
+
+# V4L2 audio
+
+replace define V4L2_AUDCAP_STEREO audio-capability
+replace define V4L2_AUDCAP_AVL audio-capability
+
+replace define V4L2_AUDMODE_AVL audio-mode
+
+# MPEG
+
+replace define V4L2_ENC_IDX_FRAME_I :c:type:`v4l2_enc_idx`
+replace define V4L2_ENC_IDX_FRAME_P :c:type:`v4l2_enc_idx`
+replace define V4L2_ENC_IDX_FRAME_B :c:type:`v4l2_enc_idx`
+replace define V4L2_ENC_IDX_FRAME_MASK :c:type:`v4l2_enc_idx`
+replace define V4L2_ENC_IDX_ENTRIES :c:type:`v4l2_enc_idx`
+
+replace define V4L2_ENC_CMD_START encoder-cmds
+replace define V4L2_ENC_CMD_STOP encoder-cmds
+replace define V4L2_ENC_CMD_PAUSE encoder-cmds
+replace define V4L2_ENC_CMD_RESUME encoder-cmds
+
+replace define V4L2_ENC_CMD_STOP_AT_GOP_END encoder-flags
+
+replace define V4L2_DEC_CMD_START decoder-cmds
+replace define V4L2_DEC_CMD_STOP decoder-cmds
+replace define V4L2_DEC_CMD_PAUSE decoder-cmds
+replace define V4L2_DEC_CMD_RESUME decoder-cmds
+replace define V4L2_DEC_CMD_FLUSH decoder-cmds
+
+replace define V4L2_DEC_CMD_START_MUTE_AUDIO decoder-cmds
+replace define V4L2_DEC_CMD_PAUSE_TO_BLACK decoder-cmds
+replace define V4L2_DEC_CMD_STOP_TO_BLACK decoder-cmds
+replace define V4L2_DEC_CMD_STOP_IMMEDIATELY decoder-cmds
+
+replace define V4L2_DEC_START_FMT_NONE decoder-cmds
+replace define V4L2_DEC_START_FMT_GOP decoder-cmds
+
+# V4L2 VBI
+
+replace define V4L2_VBI_UNSYNC vbifmt-flags
+replace define V4L2_VBI_INTERLACED vbifmt-flags
+
+replace define V4L2_VBI_ITU_525_F1_START :c:type:`v4l2_vbi_format`
+replace define V4L2_VBI_ITU_525_F2_START :c:type:`v4l2_vbi_format`
+replace define V4L2_VBI_ITU_625_F1_START :c:type:`v4l2_vbi_format`
+replace define V4L2_VBI_ITU_625_F2_START :c:type:`v4l2_vbi_format`
+
+
+replace define V4L2_SLICED_TELETEXT_B vbi-services
+replace define V4L2_SLICED_VPS vbi-services
+replace define V4L2_SLICED_CAPTION_525 vbi-services
+replace define V4L2_SLICED_WSS_625 vbi-services
+replace define V4L2_SLICED_VBI_525 vbi-services
+replace define V4L2_SLICED_VBI_625 vbi-services
+
+replace define V4L2_MPEG_VBI_IVTV_TELETEXT_B ITV0-Line-Identifier-Constants
+replace define V4L2_MPEG_VBI_IVTV_CAPTION_525 ITV0-Line-Identifier-Constants
+replace define V4L2_MPEG_VBI_IVTV_WSS_625 ITV0-Line-Identifier-Constants
+replace define V4L2_MPEG_VBI_IVTV_VPS ITV0-Line-Identifier-Constants
+
+replace define V4L2_MPEG_VBI_IVTV_MAGIC0 v4l2-mpeg-vbi-fmt-ivtv-magic
+replace define V4L2_MPEG_VBI_IVTV_MAGIC1 v4l2-mpeg-vbi-fmt-ivtv-magic
+
+# V4L2 events
+
+replace define V4L2_EVENT_ALL event-type
+replace define V4L2_EVENT_VSYNC event-type
+replace define V4L2_EVENT_EOS event-type
+replace define V4L2_EVENT_CTRL event-type
+replace define V4L2_EVENT_FRAME_SYNC event-type
+replace define V4L2_EVENT_SOURCE_CHANGE event-type
+replace define V4L2_EVENT_MOTION_DET event-type
+replace define V4L2_EVENT_PRIVATE_START event-type
+
+replace define V4L2_EVENT_CTRL_CH_VALUE ctrl-changes-flags
+replace define V4L2_EVENT_CTRL_CH_FLAGS ctrl-changes-flags
+replace define V4L2_EVENT_CTRL_CH_RANGE ctrl-changes-flags
+
+replace define V4L2_EVENT_SRC_CH_RESOLUTION src-changes-flags
+
+replace define V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ :c:type:`v4l2_event_motion_det`
+
+replace define V4L2_EVENT_SUB_FL_SEND_INITIAL event-flags
+replace define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK event-flags
+
+# V4L2 debugging
+replace define V4L2_CHIP_MATCH_BRIDGE vidioc_dbg_g_register
+replace define V4L2_CHIP_MATCH_SUBDEV vidioc_dbg_g_register
+replace define V4L2_CHIP_MATCH_HOST vidioc_dbg_g_register
+replace define V4L2_CHIP_MATCH_I2C_DRIVER vidioc_dbg_g_register
+replace define V4L2_CHIP_MATCH_I2C_ADDR vidioc_dbg_g_register
+replace define V4L2_CHIP_MATCH_AC97 vidioc_dbg_g_register
+
+replace define V4L2_CHIP_FL_READABLE vidioc_dbg_g_register
+replace define V4L2_CHIP_FL_WRITABLE vidioc_dbg_g_register
+
+# Ignore reserved ioctl and ancillary macros
+
+ignore define VIDEO_MAX_FRAME
+ignore define VIDEO_MAX_PLANES
+ignore define v4l2_fourcc
+ignore define v4l2_fourcc_be
+ignore define V4L2_FIELD_HAS_TOP
+ignore define V4L2_FIELD_HAS_BOTTOM
+ignore define V4L2_FIELD_HAS_BOTH
+ignore define V4L2_FIELD_HAS_T_OR_B
+ignore define V4L2_TYPE_IS_MULTIPLANAR
+ignore define V4L2_TYPE_IS_OUTPUT
+ignore define V4L2_TUNER_ADC
+ignore define V4L2_MAP_COLORSPACE_DEFAULT
+ignore define V4L2_MAP_XFER_FUNC_DEFAULT
+ignore define V4L2_MAP_YCBCR_ENC_DEFAULT
+ignore define V4L2_DV_BT_BLANKING_WIDTH
+ignore define V4L2_DV_BT_FRAME_WIDTH
+ignore define V4L2_DV_BT_BLANKING_HEIGHT
+ignore define V4L2_DV_BT_FRAME_HEIGHT
+ignore define V4L2_IN_CAP_CUSTOM_TIMINGS
+ignore define V4L2_CTRL_ID_MASK
+ignore define V4L2_CTRL_ID2CLASS
+ignore define V4L2_CTRL_ID2WHICH
+ignore define V4L2_CTRL_DRIVER_PRIV
+ignore define V4L2_CTRL_MAX_DIMS
+ignore define V4L2_CTRL_WHICH_CUR_VAL
+ignore define V4L2_CTRL_WHICH_DEF_VAL
+ignore define V4L2_CTRL_WHICH_REQUEST_VAL
+ignore define V4L2_OUT_CAP_CUSTOM_TIMINGS
+ignore define V4L2_CID_MAX_CTRLS
+
+ignore define BASE_VIDIOC_PRIVATE
+
+# Associate ioctls with their counterparts
+replace ioctl VIDIOC_DBG_S_REGISTER vidioc_dbg_g_register
+replace ioctl VIDIOC_DQBUF vidioc_qbuf
+replace ioctl VIDIOC_S_AUDOUT vidioc_g_audout
+replace ioctl VIDIOC_S_CROP vidioc_g_crop
+replace ioctl VIDIOC_S_CTRL vidioc_g_ctrl
+replace ioctl VIDIOC_S_DV_TIMINGS vidioc_g_dv_timings
+replace ioctl VIDIOC_S_EDID vidioc_g_edid
+replace ioctl VIDIOC_S_EXT_CTRLS vidioc_g_ext_ctrls
+replace ioctl VIDIOC_S_FBUF vidioc_g_fbuf
+replace ioctl VIDIOC_S_FMT vidioc_g_fmt
+replace ioctl VIDIOC_S_FREQUENCY vidioc_g_frequency
+replace ioctl VIDIOC_S_INPUT vidioc_g_input
+replace ioctl VIDIOC_S_JPEGCOMP vidioc_g_jpegcomp
+replace ioctl VIDIOC_S_MODULATOR vidioc_g_modulator
+replace ioctl VIDIOC_S_OUTPUT vidioc_g_output
+replace ioctl VIDIOC_S_PARM vidioc_g_parm
+replace ioctl VIDIOC_S_PRIORITY vidioc_g_priority
+replace ioctl VIDIOC_S_SELECTION vidioc_g_selection
+replace ioctl VIDIOC_S_STD vidioc_g_std
+replace ioctl VIDIOC_S_AUDIO vidioc_g_audio
+replace ioctl VIDIOC_S_TUNER vidioc_g_tuner
+replace ioctl VIDIOC_TRY_DECODER_CMD vidioc_decoder_cmd
+replace ioctl VIDIOC_TRY_ENCODER_CMD vidioc_encoder_cmd
+replace ioctl VIDIOC_TRY_EXT_CTRLS vidioc_g_ext_ctrls
+replace ioctl VIDIOC_TRY_FMT vidioc_g_fmt
+replace ioctl VIDIOC_STREAMOFF vidioc_streamon
+replace ioctl VIDIOC_QUERY_EXT_CTRL vidioc_queryctrl
+replace ioctl VIDIOC_QUERYMENU vidioc_queryctrl
diff --git a/Documentation/virt/kvm/amd-memory-encryption.rst b/Documentation/virt/kvm/amd-memory-encryption.rst
index c3129b9ba5cb..57c01f531e61 100644
--- a/Documentation/virt/kvm/amd-memory-encryption.rst
+++ b/Documentation/virt/kvm/amd-memory-encryption.rst
@@ -74,7 +74,7 @@ should point to a file descriptor that is opened on the ``/dev/sev``
 device, if needed (see individual commands).
 
 On output, ``error`` is zero on success, or an error code.  Error codes
-are defined in ``<linux/psp-dev.h>`.
+are defined in ``<linux/psp-dev.h>``.
 
 KVM implements the following commands to support common lifecycle events of SEV
 guests, such as launching, running, snapshotting, migrating and decommissioning.
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index efbbe570aa9b..d871dacb984e 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -5802,6 +5802,23 @@ If present, this capability can be enabled for a VM, meaning that KVM
 will allow the transition to secure guest mode.  Otherwise KVM will
 veto the transition.
 
+7.20 KVM_CAP_HALT_POLL
+----------------------
+
+:Architectures: all
+:Target: VM
+:Parameters: args[0] is the maximum poll time in nanoseconds
+:Returns: 0 on success; -1 on error
+
+This capability overrides the kvm module parameter halt_poll_ns for the
+target VM.
+
+VCPU polling allows a VCPU to poll for wakeup events instead of immediately
+scheduling during guest halts. The maximum time a VCPU can spend polling is
+controlled by the kvm module parameter halt_poll_ns. This capability allows
+the maximum halt time to specified on a per-VM basis, effectively overriding
+the module parameter for the target VM.
+
 8. Other capabilities.
 ======================
 
diff --git a/Documentation/virt/kvm/arm/pvtime.rst b/Documentation/virt/kvm/arm/pvtime.rst
index 2357dd2d8655..687b60d76ca9 100644
--- a/Documentation/virt/kvm/arm/pvtime.rst
+++ b/Documentation/virt/kvm/arm/pvtime.rst
@@ -76,5 +76,5 @@ It is advisable that one or more 64k pages are set aside for the purpose of
 these structures and not used for other purposes, this enables the guest to map
 the region using 64k pages and avoids conflicting attributes with other memory.
 
-For the user space interface see Documentation/virt/kvm/devices/vcpu.txt
+For the user space interface see Documentation/virt/kvm/devices/vcpu.rst
 section "3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL".
diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst
index 9963e680770a..ca374d3fe085 100644
--- a/Documentation/virt/kvm/devices/vcpu.rst
+++ b/Documentation/virt/kvm/devices/vcpu.rst
@@ -110,5 +110,5 @@ Returns:
 
 Specifies the base address of the stolen time structure for this VCPU. The
 base address must be 64 byte aligned and exist within a valid guest memory
-region. See Documentation/virt/kvm/arm/pvtime.txt for more information
+region. See Documentation/virt/kvm/arm/pvtime.rst for more information
 including the layout of the stolen time structure.
diff --git a/Documentation/virt/kvm/hypercalls.rst b/Documentation/virt/kvm/hypercalls.rst
index dbaf207e560d..ed4fddd364ea 100644
--- a/Documentation/virt/kvm/hypercalls.rst
+++ b/Documentation/virt/kvm/hypercalls.rst
@@ -22,7 +22,7 @@ S390:
   number in R1.
 
   For further information on the S390 diagnose call as supported by KVM,
-  refer to Documentation/virt/kvm/s390-diag.txt.
+  refer to Documentation/virt/kvm/s390-diag.rst.
 
 PowerPC:
   It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers.
@@ -30,7 +30,7 @@ PowerPC:
 
   KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions'
   property inside the device tree's /hypervisor node.
-  For more information refer to Documentation/virt/kvm/ppc-pv.txt
+  For more information refer to Documentation/virt/kvm/ppc-pv.rst
 
 MIPS:
   KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall
diff --git a/Documentation/virt/kvm/mmu.rst b/Documentation/virt/kvm/mmu.rst
index 60981887d20b..46126ecc70f7 100644
--- a/Documentation/virt/kvm/mmu.rst
+++ b/Documentation/virt/kvm/mmu.rst
@@ -319,7 +319,7 @@ Handling a page fault is performed as follows:
 
  - If both P bit and R/W bit of error code are set, this could possibly
    be handled as a "fast page fault" (fixed without taking the MMU lock).  See
-   the description in Documentation/virt/kvm/locking.txt.
+   the description in Documentation/virt/kvm/locking.rst.
 
  - if needed, walk the guest page tables to determine the guest translation
    (gva->gpa or ngpa->gpa)
diff --git a/Documentation/virt/kvm/nested-vmx.rst b/Documentation/virt/kvm/nested-vmx.rst
index 592b0ab6970b..89851cbb7df9 100644
--- a/Documentation/virt/kvm/nested-vmx.rst
+++ b/Documentation/virt/kvm/nested-vmx.rst
@@ -116,10 +116,7 @@ struct shadow_vmcs is ever changed.
 		natural_width cr4_guest_host_mask;
 		natural_width cr0_read_shadow;
 		natural_width cr4_read_shadow;
-		natural_width cr3_target_value0;
-		natural_width cr3_target_value1;
-		natural_width cr3_target_value2;
-		natural_width cr3_target_value3;
+		natural_width dead_space[4]; /* Last remnants of cr3_target_value[0-3]. */
 		natural_width exit_qualification;
 		natural_width guest_linear_address;
 		natural_width guest_cr0;
diff --git a/Documentation/virt/kvm/review-checklist.rst b/Documentation/virt/kvm/review-checklist.rst
index 1f86a9d3f705..dc01aea4057b 100644
--- a/Documentation/virt/kvm/review-checklist.rst
+++ b/Documentation/virt/kvm/review-checklist.rst
@@ -10,7 +10,7 @@ Review checklist for kvm patches
 2.  Patches should be against kvm.git master branch.
 
 3.  If the patch introduces or modifies a new userspace API:
-    - the API must be documented in Documentation/virt/kvm/api.txt
+    - the API must be documented in Documentation/virt/kvm/api.rst
     - the API must be discoverable using KVM_CHECK_EXTENSION
 
 4.  New state must include support for save/restore.
diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst
index e8d943b21cf9..611140ffef7e 100644
--- a/Documentation/vm/index.rst
+++ b/Documentation/vm/index.rst
@@ -31,6 +31,7 @@ descriptions of data structures and algorithms.
    active_mm
    balance
    cleancache
+   free_page_reporting
    frontswap
    highmem
    hmm
diff --git a/Documentation/vm/memory-model.rst b/Documentation/vm/memory-model.rst
index 58a12376b7df..91228044ed16 100644
--- a/Documentation/vm/memory-model.rst
+++ b/Documentation/vm/memory-model.rst
@@ -46,11 +46,10 @@ maps the entire physical memory. For most architectures, the holes
 have entries in the `mem_map` array. The `struct page` objects
 corresponding to the holes are never fully initialized.
 
-To allocate the `mem_map` array, architecture specific setup code
-should call :c:func:`free_area_init_node` function or its convenience
-wrapper :c:func:`free_area_init`. Yet, the mappings array is not
-usable until the call to :c:func:`memblock_free_all` that hands all
-the memory to the page allocator.
+To allocate the `mem_map` array, architecture specific setup code should
+call :c:func:`free_area_init` function. Yet, the mappings array is not
+usable until the call to :c:func:`memblock_free_all` that hands all the
+memory to the page allocator.
 
 If an architecture enables `CONFIG_ARCH_HAS_HOLES_MEMORYMODEL` option,
 it may free parts of the `mem_map` array that do not cover the
diff --git a/Documentation/vm/page_owner.rst b/Documentation/vm/page_owner.rst
index 0ed5ab8c7ab4..079f3f8c4784 100644
--- a/Documentation/vm/page_owner.rst
+++ b/Documentation/vm/page_owner.rst
@@ -83,8 +83,7 @@ Usage
 4) Analyze information from page owner::
 
 	cat /sys/kernel/debug/page_owner > page_owner_full.txt
-	grep -v ^PFN page_owner_full.txt > page_owner.txt
-	./page_owner_sort page_owner.txt sorted_page_owner.txt
+	./page_owner_sort page_owner_full.txt sorted_page_owner.txt
 
    See the result about who allocated each page
    in the ``sorted_page_owner.txt``.
diff --git a/Documentation/watch_queue.rst b/Documentation/watch_queue.rst
new file mode 100644
index 000000000000..d8f70282d247
--- /dev/null
+++ b/Documentation/watch_queue.rst
@@ -0,0 +1,354 @@
+==============================
+General notification mechanism
+==============================
+
+The general notification mechanism is built on top of the standard pipe driver
+whereby it effectively splices notification messages from the kernel into pipes
+opened by userspace.  This can be used in conjunction with::
+
+  * Key/keyring notifications
+
+  * General device event notifications
+
+
+The notifications buffers can be enabled by:
+
+	"General setup"/"General notification queue"
+	(CONFIG_WATCH_QUEUE)
+
+This document has the following sections:
+
+.. contents:: :local:
+
+
+Overview
+========
+
+This facility appears as a pipe that is opened in a special mode.  The pipe's
+internal ring buffer is used to hold messages that are generated by the kernel.
+These messages are then read out by read().  Splice and similar are disabled on
+such pipes due to them wanting to, under some circumstances, revert their
+additions to the ring - which might end up interleaved with notification
+messages.
+
+The owner of the pipe has to tell the kernel which sources it would like to
+watch through that pipe.  Only sources that have been connected to a pipe will
+insert messages into it.  Note that a source may be bound to multiple pipes and
+insert messages into all of them simultaneously.
+
+Filters may also be emplaced on a pipe so that certain source types and
+subevents can be ignored if they're not of interest.
+
+A message will be discarded if there isn't a slot available in the ring or if
+no preallocated message buffer is available.  In both of these cases, read()
+will insert a WATCH_META_LOSS_NOTIFICATION message into the output buffer after
+the last message currently in the buffer has been read.
+
+Note that when producing a notification, the kernel does not wait for the
+consumers to collect it, but rather just continues on.  This means that
+notifications can be generated whilst spinlocks are held and also protects the
+kernel from being held up indefinitely by a userspace malfunction.
+
+
+Message Structure
+=================
+
+Notification messages begin with a short header::
+
+	struct watch_notification {
+		__u32	type:24;
+		__u32	subtype:8;
+		__u32	info;
+	};
+
+"type" indicates the source of the notification record and "subtype" indicates
+the type of record from that source (see the Watch Sources section below).  The
+type may also be "WATCH_TYPE_META".  This is a special record type generated
+internally by the watch queue itself.  There are two subtypes:
+
+  * WATCH_META_REMOVAL_NOTIFICATION
+  * WATCH_META_LOSS_NOTIFICATION
+
+The first indicates that an object on which a watch was installed was removed
+or destroyed and the second indicates that some messages have been lost.
+
+"info" indicates a bunch of things, including:
+
+  * The length of the message in bytes, including the header (mask with
+    WATCH_INFO_LENGTH and shift by WATCH_INFO_LENGTH__SHIFT).  This indicates
+    the size of the record, which may be between 8 and 127 bytes.
+
+  * The watch ID (mask with WATCH_INFO_ID and shift by WATCH_INFO_ID__SHIFT).
+    This indicates that caller's ID of the watch, which may be between 0
+    and 255.  Multiple watches may share a queue, and this provides a means to
+    distinguish them.
+
+  * A type-specific field (WATCH_INFO_TYPE_INFO).  This is set by the
+    notification producer to indicate some meaning specific to the type and
+    subtype.
+
+Everything in info apart from the length can be used for filtering.
+
+The header can be followed by supplementary information.  The format of this is
+at the discretion is defined by the type and subtype.
+
+
+Watch List (Notification Source) API
+====================================
+
+A "watch list" is a list of watchers that are subscribed to a source of
+notifications.  A list may be attached to an object (say a key or a superblock)
+or may be global (say for device events).  From a userspace perspective, a
+non-global watch list is typically referred to by reference to the object it
+belongs to (such as using KEYCTL_NOTIFY and giving it a key serial number to
+watch that specific key).
+
+To manage a watch list, the following functions are provided:
+
+  * ``void init_watch_list(struct watch_list *wlist,
+			   void (*release_watch)(struct watch *wlist));``
+
+    Initialise a watch list.  If ``release_watch`` is not NULL, then this
+    indicates a function that should be called when the watch_list object is
+    destroyed to discard any references the watch list holds on the watched
+    object.
+
+  * ``void remove_watch_list(struct watch_list *wlist);``
+
+    This removes all of the watches subscribed to a watch_list and frees them
+    and then destroys the watch_list object itself.
+
+
+Watch Queue (Notification Output) API
+=====================================
+
+A "watch queue" is the buffer allocated by an application that notification
+records will be written into.  The workings of this are hidden entirely inside
+of the watch_queue device driver, but it is necessary to gain a reference to it
+to set a watch.  These can be managed with:
+
+  * ``struct watch_queue *get_watch_queue(int fd);``
+
+    Since watch queues are indicated to the kernel by the fd of the pipe that
+    implements the buffer, userspace must hand that fd through a system call.
+    This can be used to look up an opaque pointer to the watch queue from the
+    system call.
+
+  * ``void put_watch_queue(struct watch_queue *wqueue);``
+
+    This discards the reference obtained from ``get_watch_queue()``.
+
+
+Watch Subscription API
+======================
+
+A "watch" is a subscription on a watch list, indicating the watch queue, and
+thus the buffer, into which notification records should be written.  The watch
+queue object may also carry filtering rules for that object, as set by
+userspace.  Some parts of the watch struct can be set by the driver::
+
+	struct watch {
+		union {
+			u32		info_id;	/* ID to be OR'd in to info field */
+			...
+		};
+		void			*private;	/* Private data for the watched object */
+		u64			id;		/* Internal identifier */
+		...
+	};
+
+The ``info_id`` value should be an 8-bit number obtained from userspace and
+shifted by WATCH_INFO_ID__SHIFT.  This is OR'd into the WATCH_INFO_ID field of
+struct watch_notification::info when and if the notification is written into
+the associated watch queue buffer.
+
+The ``private`` field is the driver's data associated with the watch_list and
+is cleaned up by the ``watch_list::release_watch()`` method.
+
+The ``id`` field is the source's ID.  Notifications that are posted with a
+different ID are ignored.
+
+The following functions are provided to manage watches:
+
+  * ``void init_watch(struct watch *watch, struct watch_queue *wqueue);``
+
+    Initialise a watch object, setting its pointer to the watch queue, using
+    appropriate barriering to avoid lockdep complaints.
+
+  * ``int add_watch_to_object(struct watch *watch, struct watch_list *wlist);``
+
+    Subscribe a watch to a watch list (notification source).  The
+    driver-settable fields in the watch struct must have been set before this
+    is called.
+
+  * ``int remove_watch_from_object(struct watch_list *wlist,
+				   struct watch_queue *wqueue,
+				   u64 id, false);``
+
+    Remove a watch from a watch list, where the watch must match the specified
+    watch queue (``wqueue``) and object identifier (``id``).  A notification
+    (``WATCH_META_REMOVAL_NOTIFICATION``) is sent to the watch queue to
+    indicate that the watch got removed.
+
+  * ``int remove_watch_from_object(struct watch_list *wlist, NULL, 0, true);``
+
+    Remove all the watches from a watch list.  It is expected that this will be
+    called preparatory to destruction and that the watch list will be
+    inaccessible to new watches by this point.  A notification
+    (``WATCH_META_REMOVAL_NOTIFICATION``) is sent to the watch queue of each
+    subscribed watch to indicate that the watch got removed.
+
+
+Notification Posting API
+========================
+
+To post a notification to watch list so that the subscribed watches can see it,
+the following function should be used::
+
+	void post_watch_notification(struct watch_list *wlist,
+				     struct watch_notification *n,
+				     const struct cred *cred,
+				     u64 id);
+
+The notification should be preformatted and a pointer to the header (``n``)
+should be passed in.  The notification may be larger than this and the size in
+units of buffer slots is noted in ``n->info & WATCH_INFO_LENGTH``.
+
+The ``cred`` struct indicates the credentials of the source (subject) and is
+passed to the LSMs, such as SELinux, to allow or suppress the recording of the
+note in each individual queue according to the credentials of that queue
+(object).
+
+The ``id`` is the ID of the source object (such as the serial number on a key).
+Only watches that have the same ID set in them will see this notification.
+
+
+Watch Sources
+=============
+
+Any particular buffer can be fed from multiple sources.  Sources include:
+
+  * WATCH_TYPE_KEY_NOTIFY
+
+    Notifications of this type indicate changes to keys and keyrings, including
+    the changes of keyring contents or the attributes of keys.
+
+    See Documentation/security/keys/core.rst for more information.
+
+  * WATCH_TYPE_BLOCK_NOTIFY
+
+    Notifications of this type indicate block layer events, such as I/O errors
+    or temporary link loss.  Watches of this type are set on a global queue.
+
+
+Event Filtering
+===============
+
+Once a watch queue has been created, a set of filters can be applied to limit
+the events that are received using::
+
+	struct watch_notification_filter filter = {
+		...
+	};
+	ioctl(fd, IOC_WATCH_QUEUE_SET_FILTER, &filter)
+
+The filter description is a variable of type::
+
+	struct watch_notification_filter {
+		__u32	nr_filters;
+		__u32	__reserved;
+		struct watch_notification_type_filter filters[];
+	};
+
+Where "nr_filters" is the number of filters in filters[] and "__reserved"
+should be 0.  The "filters" array has elements of the following type::
+
+	struct watch_notification_type_filter {
+		__u32	type;
+		__u32	info_filter;
+		__u32	info_mask;
+		__u32	subtype_filter[8];
+	};
+
+Where:
+
+  * ``type`` is the event type to filter for and should be something like
+    "WATCH_TYPE_KEY_NOTIFY"
+
+  * ``info_filter`` and ``info_mask`` act as a filter on the info field of the
+    notification record.  The notification is only written into the buffer if::
+
+	(watch.info & info_mask) == info_filter
+
+    This could be used, for example, to ignore events that are not exactly on
+    the watched point in a mount tree.
+
+  * ``subtype_filter`` is a bitmask indicating the subtypes that are of
+    interest.  Bit 0 of subtype_filter[0] corresponds to subtype 0, bit 1 to
+    subtype 1, and so on.
+
+If the argument to the ioctl() is NULL, then the filters will be removed and
+all events from the watched sources will come through.
+
+
+Userspace Code Example
+======================
+
+A buffer is created with something like the following::
+
+	pipe2(fds, O_TMPFILE);
+	ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, 256);
+
+It can then be set to receive keyring change notifications and device event
+notifications::
+
+	keyctl(KEYCTL_WATCH_KEY, KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
+	watch_devices(fds[1], 0x2);
+
+The notifications can then be consumed by something like the following::
+
+	static void consumer(int rfd, struct watch_queue_buffer *buf)
+	{
+		unsigned char buffer[128];
+		ssize_t buf_len;
+
+		while (buf_len = read(rfd, buffer, sizeof(buffer)),
+		       buf_len > 0
+		       ) {
+			void *p = buffer;
+			void *end = buffer + buf_len;
+			while (p < end) {
+				union {
+					struct watch_notification n;
+					unsigned char buf1[128];
+				} n;
+				size_t largest, len;
+
+				largest = end - p;
+				if (largest > 128)
+					largest = 128;
+				memcpy(&n, p, largest);
+
+				len = (n->info & WATCH_INFO_LENGTH) >>
+					WATCH_INFO_LENGTH__SHIFT;
+				if (len == 0 || len > largest)
+					return;
+
+				switch (n.n.type) {
+				case WATCH_TYPE_META:
+					got_meta(&n.n);
+				case WATCH_TYPE_KEY_NOTIFY:
+					saw_key_change(&n.n);
+					break;
+				case WATCH_TYPE_BLOCK_NOTIFY:
+					saw_block_event(&n.n);
+					break;
+				case WATCH_TYPE_USB_NOTIFY:
+					saw_usb_event(&n.n);
+					break;
+				}
+
+				p += len;
+			}
+		}
+	}
diff --git a/Documentation/watchdog/convert_drivers_to_kernel_api.rst b/Documentation/watchdog/convert_drivers_to_kernel_api.rst
index dd934cc08e40..51b999b5551a 100644
--- a/Documentation/watchdog/convert_drivers_to_kernel_api.rst
+++ b/Documentation/watchdog/convert_drivers_to_kernel_api.rst
@@ -115,7 +115,7 @@ Add the watchdog operations
 ---------------------------
 
 All possible callbacks are defined in 'struct watchdog_ops'. You can find it
-explained in 'watchdog-kernel-api.txt' in this directory. start(), stop() and
+explained in 'watchdog-kernel-api.txt' in this directory. start() and
 owner must be set, the rest are optional. You will easily find corresponding
 functions in the old driver. Note that you will now get a pointer to the
 watchdog_device as a parameter to these functions, so you probably have to
diff --git a/Documentation/watchdog/watchdog-kernel-api.rst b/Documentation/watchdog/watchdog-kernel-api.rst
index 864edbe932c1..068a55ee0d4a 100644
--- a/Documentation/watchdog/watchdog-kernel-api.rst
+++ b/Documentation/watchdog/watchdog-kernel-api.rst
@@ -123,8 +123,8 @@ The list of watchdog operations is defined as::
 	struct module *owner;
 	/* mandatory operations */
 	int (*start)(struct watchdog_device *);
-	int (*stop)(struct watchdog_device *);
 	/* optional operations */
+	int (*stop)(struct watchdog_device *);
 	int (*ping)(struct watchdog_device *);
 	unsigned int (*status)(struct watchdog_device *);
 	int (*set_timeout)(struct watchdog_device *, unsigned int);
diff --git a/Documentation/x86/x86_64/uefi.rst b/Documentation/x86/x86_64/uefi.rst
index 88c3ba32546f..3b894103a734 100644
--- a/Documentation/x86/x86_64/uefi.rst
+++ b/Documentation/x86/x86_64/uefi.rst
@@ -36,7 +36,7 @@ Mechanics
 
 	elilo bootloader with x86_64 support, elilo configuration file,
 	kernel image built in first step and corresponding
-	initrd. Instructions on building elilo	and its dependencies
+	initrd. Instructions on building elilo and its dependencies
 	can be found in the elilo sourceforge project.
 
 - Boot to EFI shell and invoke elilo choosing the kernel image built
diff --git a/MAINTAINERS b/MAINTAINERS
index 26f281d9f32a..b0cf6c358136 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -294,6 +294,7 @@ F:	drivers/gpio/gpio-104-idio-16.c
 
 ACCES 104-QUAD-8 DRIVER
 M:	William Breathitt Gray <vilhelm.gray@gmail.com>
+M:	Syed Nayyar Waris <syednwaris@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
@@ -892,6 +893,11 @@ F:	drivers/gpu/drm/amd/include/v9_structs.h
 F:	drivers/gpu/drm/amd/include/vi_structs.h
 F:	include/uapi/linux/kfd_ioctl.h
 
+AMD SPI DRIVER
+M:	Sanjay R Mehta <sanju.mehta@amd.com>
+S:	Maintained
+F:	drivers/spi/spi-amd.c
+
 AMD MP2 I2C DRIVER
 M:	Elie Morisse <syniurge@gmail.com>
 M:	Nehal Shah <nehal-bakulchandra.shah@amd.com>
@@ -2272,6 +2278,8 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-realtek-soc@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/realtek.yaml
+F:	arch/arm/boot/dts/rtd*
+F:	arch/arm/mach-realtek/
 F:	arch/arm64/boot/dts/realtek/
 
 ARM/RENESAS ARM64 ARCHITECTURE
@@ -2694,8 +2702,8 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 W:	http://wiki.xilinx.com
 T:	git https://github.com/Xilinx/linux-xlnx.git
-F:	Documentation/devicetree/bindings/i2c/i2c-cadence.txt
-F:	Documentation/devicetree/bindings/i2c/i2c-xiic.txt
+F:	Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+F:	Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
 F:	arch/arm/mach-zynq/
 F:	drivers/block/xsysace.c
 F:	drivers/clocksource/timer-cadence-ttc.c
@@ -3191,7 +3199,7 @@ Q:	https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
 F:	Documentation/bpf/
-F:	Documentation/networking/filter.txt
+F:	Documentation/networking/filter.rst
 F:	arch/*/net/*
 F:	include/linux/bpf*
 F:	include/linux/filter.h
@@ -3669,7 +3677,7 @@ L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/v4l-drivers/bttv*
+F:	Documentation/driver-api/media/drivers/bttv*
 F:	drivers/media/pci/bt8xx/bttv*
 
 BUS FREQUENCY DRIVER FOR SAMSUNG EXYNOS
@@ -3760,7 +3768,7 @@ M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/v4l-drivers/cafe_ccic*
+F:	Documentation/admin-guide/media/cafe_ccic*
 F:	drivers/media/platform/marvell-ccic/
 
 CAIF NETWORK LAYER
@@ -3896,6 +3904,15 @@ S:	Supported
 W:	https://developer.arm.com/products/system-ip/trustzone-cryptocell/cryptocell-700-family
 F:	drivers/crypto/ccree/
 
+CCTRNG ARM TRUSTZONE CRYPTOCELL TRUE RANDOM NUMBER GENERATOR (TRNG) DRIVER
+M:	Hadar Gat <hadar.gat@arm.com>
+L:	linux-crypto@vger.kernel.org
+S:	Supported
+F:	drivers/char/hw_random/cctrng.c
+F:	drivers/char/hw_random/cctrng.h
+F:	Documentation/devicetree/bindings/rng/arm-cctrng.txt
+W:	https://developer.arm.com/products/system-ip/trustzone-cryptocell/cryptocell-700-family
+
 CEC FRAMEWORK
 M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
@@ -3904,8 +3921,8 @@ W:	http://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/ABI/testing/debugfs-cec-error-inj
 F:	Documentation/devicetree/bindings/media/cec.txt
-F:	Documentation/media/kapi/cec-core.rst
-F:	Documentation/media/uapi/cec
+F:	Documentation/driver-api/media/cec-core.rst
+F:	Documentation/userspace-api/media/cec
 F:	drivers/media/cec/
 F:	drivers/media/rc/keymaps/rc-cec.c
 F:	include/media/cec-notifier.h
@@ -4541,7 +4558,7 @@ L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/v4l-drivers/cx88*
+F:	Documentation/driver-api/media/drivers/cx88*
 F:	drivers/media/pci/cx88/
 
 CXD2820R MEDIA DRIVER
@@ -4727,7 +4744,7 @@ DECnet NETWORK LAYER
 L:	linux-decnet-user@lists.sourceforge.net
 S:	Orphan
 W:	http://linux-decnet.sourceforge.net
-F:	Documentation/networking/decnet.txt
+F:	Documentation/networking/decnet.rst
 F:	net/decnet/
 
 DECSTATION PLATFORM SUPPORT
@@ -5044,7 +5061,7 @@ F:	drivers/dma-buf/
 F:	include/linux/*fence.h
 F:	include/linux/dma-buf*
 F:	include/linux/dma-resv.h
-K:	dma_(buf|fence|resv)
+K:	\bdma_(?:buf|fence|resv)\b
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
 M:	Vinod Koul <vkoul@kernel.org>
@@ -5124,12 +5141,14 @@ F:	scripts/documentation-file-ref-check
 F:	scripts/kernel-doc
 F:	scripts/sphinx-pre-install
 X:	Documentation/ABI/
+X:	Documentation/admin-guide/media/
 X:	Documentation/devicetree/
+X:	Documentation/driver-api/media/
 X:	Documentation/firmware-guide/acpi/
 X:	Documentation/i2c/
-X:	Documentation/media/
 X:	Documentation/power/
 X:	Documentation/spi/
+X:	Documentation/userspace-api/media/
 
 DOCUMENTATION SCRIPTS
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -5256,7 +5275,7 @@ DRM DRIVER FOR ARM VERSATILE TFT PANELS
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
-F:	Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
+F:	Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
 F:	drivers/gpu/drm/panel/panel-arm-versatile.c
 
 DRM DRIVER FOR ASPEED BMC GFX
@@ -5282,7 +5301,7 @@ F:	drivers/gpu/drm/bochs/
 DRM DRIVER FOR BOE HIMAX8279D PANELS
 M:	Jerry Han <hanxu5@huaqin.corp-partner.google.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
+F:	Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
 F:	drivers/gpu/drm/panel/panel-boe-himax8279d.c
 
 DRM DRIVER FOR FARADAY TVE200 TV ENCODER
@@ -5300,7 +5319,7 @@ F:	drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
 DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
+F:	Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
 F:	drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
 
 DRM DRIVER FOR GRAIN MEDIA GM12U320 PROJECTORS
@@ -5383,7 +5402,7 @@ F:	include/uapi/drm/nouveau_drm.h
 DRM DRIVER FOR OLIMEX LCD-OLINUXINO PANELS
 M:	Stefan Mavrodiev <stefan@olimex.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
+F:	Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
 F:	drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c
 
 DRM DRIVER FOR PERVASIVE DISPLAYS REPAPER PANELS
@@ -5400,7 +5419,7 @@ L:	virtualization@lists.linux-foundation.org
 S:	Obsolete
 W:	https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
 T:	git git://anongit.freedesktop.org/drm/drm-misc
-F:	drivers/gpu/drm/cirrus/
+F:	drivers/gpu/drm/tiny/cirrus.c
 
 DRM DRIVER FOR QXL VIRTUAL GPU
 M:	Dave Airlie <airlied@redhat.com>
@@ -5450,7 +5469,7 @@ F:	drivers/gpu/drm/tiny/st7586.c
 DRM DRIVER FOR SITRONIX ST7701 PANELS
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
+F:	Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
 F:	drivers/gpu/drm/panel/panel-sitronix-st7701.c
 
 DRM DRIVER FOR SITRONIX ST7735R PANELS
@@ -6176,7 +6195,6 @@ M:	Yash Shah <yash.shah@sifive.com>
 L:	linux-edac@vger.kernel.org
 S:	Supported
 F:	drivers/edac/sifive_edac.c
-F:	drivers/soc/sifive_l2_cache.c
 
 EDAC-SKYLAKE
 M:	Tony Luck <tony.luck@intel.com>
@@ -6236,7 +6254,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/v4l-drivers/em28xx*
+F:	Documentation/admin-guide/media/em28xx*
 F:	drivers/media/usb/em28xx/
 
 EMBEDDED LINUX
@@ -7036,6 +7054,7 @@ GASKET DRIVER FRAMEWORK
 M:	Rob Springer <rspringer@google.com>
 M:	Todd Poynor <toddpoynor@google.com>
 M:	Ben Chan <benchan@chromium.org>
+M:	Richard Yeh <rcy@google.com>
 S:	Maintained
 F:	drivers/staging/gasket/
 
@@ -7119,6 +7138,7 @@ F:	include/uapi/asm-generic/
 
 GENERIC PHY FRAMEWORK
 M:	Kishon Vijay Abraham I <kishon@ti.com>
+M:	Vinod Koul <vkoul@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
@@ -7182,7 +7202,7 @@ L:	cluster-devel@redhat.com
 S:	Supported
 W:	http://sources.redhat.com/cluster/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git
-F:	Documentation/filesystems/gfs2*.txt
+F:	Documentation/filesystems/gfs2*
 F:	fs/gfs2/
 F:	include/uapi/linux/gfs2_ondisk.h
 
@@ -7458,7 +7478,7 @@ L:	linux-media@vger.kernel.org
 L:	linux-rockchip@lists.infradead.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
-F:	Documentation/devicetree/bindings/media/rockchip-vpu.txt
+F:	Documentation/devicetree/bindings/media/rockchip-vpu.yaml
 F:	drivers/staging/media/hantro/
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
@@ -7746,11 +7766,6 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Orphan
 F:	drivers/platform/x86/tc1100-wmi.c
 
-HP100:	Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
-M:	Jaroslav Kysela <perex@perex.cz>
-S:	Obsolete
-F:	drivers/staging/hp/hp100.*
-
 HPET:	High Precision Event Timers driver
 M:	Clemens Ladisch <clemens@ladisch.de>
 S:	Maintained
@@ -7814,7 +7829,7 @@ HUAWEI ETHERNET DRIVER
 M:	Aviad Krawczyk <aviad.krawczyk@huawei.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	Documentation/networking/hinic.txt
+F:	Documentation/networking/hinic.rst
 F:	drivers/net/ethernet/huawei/hinic/
 
 HUGETLB FILESYSTEM
@@ -7883,6 +7898,7 @@ F:	drivers/pci/controller/pci-hyperv.c
 F:	drivers/scsi/storvsc_drv.c
 F:	drivers/uio/uio_hv_generic.c
 F:	drivers/video/fbdev/hyperv_fb.c
+F:	include/asm-generic/hyperv-tlfs.h
 F:	include/asm-generic/mshyperv.h
 F:	include/clocksource/hyperv_timer.h
 F:	include/linux/hyperv.h
@@ -8499,6 +8515,13 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/intel_atomisp2_pm.c
 
+INTEL BROXTON PMC DRIVER
+M:	Mika Westerberg <mika.westerberg@linux.intel.com>
+M:	Zha Qipeng <qipeng.zha@intel.com>
+S:	Maintained
+F:	drivers/mfd/intel_pmc_bxt.c
+F:	include/linux/mfd/intel_pmc_bxt.h
+
 INTEL C600 SERIES SAS CONTROLLER DRIVER
 M:	Intel SCU Linux support <intel-linux-scu@intel.com>
 M:	Artur Paszkiewicz <artur.paszkiewicz@intel.com>
@@ -8645,16 +8668,16 @@ M:	Bingbu Cao <bingbu.cao@intel.com>
 R:	Tian Shu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst
+F:	Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst
 F:	drivers/media/pci/intel/ipu3/
 
 INTEL IPU3 CSI-2 IMGU DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst
-F:	Documentation/media/v4l-drivers/ipu3.rst
-F:	Documentation/media/v4l-drivers/ipu3_rcb.svg
+F:	Documentation/admin-guide/media/ipu3.rst
+F:	Documentation/admin-guide/media/ipu3_rcb.svg
+F:	Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst
 F:	drivers/staging/media/ipu3/
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
@@ -8706,6 +8729,13 @@ F:	include/uapi/linux/mic_common.h
 F:	include/uapi/linux/mic_ioctl.h
 F:	include/uapi/linux/scif_ioctl.h
 
+INTEL P-Unit IPC DRIVER
+M:	Zha Qipeng <qipeng.zha@intel.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	arch/x86/include/asm/intel_punit_ipc.h
+F:	drivers/platform/x86/intel_punit_ipc.c
+
 INTEL PMC CORE DRIVER
 M:	Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
 M:	Vishwanath Somayaji <vishwanath.somayaji@intel.com>
@@ -8713,15 +8743,6 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/intel_pmc_core*
 
-INTEL PMC/P-Unit IPC DRIVER
-M:	Zha Qipeng<qipeng.zha@intel.com>
-L:	platform-driver-x86@vger.kernel.org
-S:	Maintained
-F:	arch/x86/include/asm/intel_pmc_ipc.h
-F:	arch/x86/include/asm/intel_punit_ipc.h
-F:	drivers/platform/x86/intel_pmc_ipc.c
-F:	drivers/platform/x86/intel_punit_ipc.c
-
 INTEL PMIC GPIO DRIVERS
 M:	Andy Shevchenko <andy@kernel.org>
 S:	Maintained
@@ -8933,7 +8954,7 @@ L:	lvs-devel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs.git
-F:	Documentation/networking/ipvs-sysctl.txt
+F:	Documentation/networking/ipvs-sysctl.rst
 F:	include/net/ip_vs.h
 F:	include/uapi/linux/ip_vs.h
 F:	net/netfilter/ipvs/
@@ -9078,7 +9099,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/v4l-drivers/ivtv*
+F:	Documentation/admin-guide/media/ivtv*
 F:	drivers/media/pci/ivtv/
 F:	include/uapi/linux/ivtv*
 
@@ -9185,6 +9206,17 @@ F:	Documentation/kbuild/kconfig*
 F:	scripts/Kconfig.include
 F:	scripts/kconfig/
 
+KCSAN
+M:	Marco Elver <elver@google.com>
+R:	Dmitry Vyukov <dvyukov@google.com>
+L:	kasan-dev@googlegroups.com
+S:	Maintained
+F:	Documentation/dev-tools/kcsan.rst
+F:	include/linux/kcsan*.h
+F:	kernel/kcsan/
+F:	lib/Kconfig.kcsan
+F:	scripts/Makefile.kcsan
+
 KDUMP
 M:	Dave Young <dyoung@redhat.com>
 M:	Baoquan He <bhe@redhat.com>
@@ -9818,6 +9850,7 @@ M:	Luc Maranget <luc.maranget@inria.fr>
 M:	"Paul E. McKenney" <paulmck@kernel.org>
 R:	Akira Yokosawa <akiyks@gmail.com>
 R:	Daniel Lustig <dlustig@nvidia.com>
+R:	Joel Fernandes <joel@joelfernandes.org>
 L:	linux-kernel@vger.kernel.org
 L:	linux-arch@vger.kernel.org
 S:	Supported
@@ -9826,6 +9859,7 @@ F:	Documentation/atomic_bitops.txt
 F:	Documentation/atomic_t.txt
 F:	Documentation/core-api/atomic_ops.rst
 F:	Documentation/core-api/refcount-vs-atomic.rst
+F:	Documentation/litmus-tests/
 F:	Documentation/memory-barriers.txt
 F:	tools/memory-model/
 
@@ -10259,7 +10293,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/max2175.txt
-F:	Documentation/media/v4l-drivers/max2175.rst
+F:	Documentation/userspace-api/media/drivers/max2175.rst
 F:	drivers/media/i2c/max2175*
 F:	include/uapi/linux/max2175.h
 
@@ -10459,8 +10493,8 @@ M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/admin-guide/media/imx.rst
 F:	Documentation/devicetree/bindings/media/imx.txt
-F:	Documentation/media/v4l-drivers/imx.rst
 F:	drivers/staging/media/imx/
 F:	include/linux/imx-media.h
 F:	include/media/imx.h
@@ -10470,9 +10504,9 @@ M:	Rui Miguel Silva <rmfrfs@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/admin-guide/media/imx7.rst
 F:	Documentation/devicetree/bindings/media/imx7-csi.txt
 F:	Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
-F:	Documentation/media/v4l-drivers/imx7.rst
 F:	drivers/staging/media/imx/imx7-media-csi.c
 F:	drivers/staging/media/imx/imx7-mipi-csis.c
 
@@ -10618,8 +10652,10 @@ S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.kernel.org/project/linux-media/list/
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/admin-guide/media/
 F:	Documentation/devicetree/bindings/media/
-F:	Documentation/media/
+F:	Documentation/driver-api/media/
+F:	Documentation/userspace-api/media/
 F:	drivers/media/
 F:	drivers/staging/media/
 F:	include/linux/platform_data/media/
@@ -11396,7 +11432,7 @@ F:	drivers/regulator/mpq7920.h
 MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
 S:	Orphan
 W:	http://popies.net/meye/
-F:	Documentation/media/v4l-drivers/meye*
+F:	Documentation/userspace-api/media/drivers/meye*
 F:	drivers/media/pci/meye/
 F:	include/uapi/linux/meye.h
 
@@ -13708,8 +13744,8 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/cec-drivers/pulse8-cec.rst
-F:	drivers/media/usb/pulse8-cec/*
+F:	Documentation/admin-guide/media/pulse8-cec.rst
+F:	drivers/media/cec/usb/pulse8/
 
 PVRUSB2 VIDEO4LINUX DRIVER
 M:	Mike Isely <isely@pobox.com>
@@ -13718,7 +13754,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://www.isely.net/pvrusb2/
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/v4l-drivers/pvrusb2*
+F:	Documentation/driver-api/media/drivers/pvrusb2*
 F:	drivers/media/usb/pvrusb2/
 
 PWC WEBCAM DRIVER
@@ -13965,8 +14001,8 @@ QUALCOMM CAMERA SUBSYSTEM DRIVER
 M:	Todor Tomov <todor.too@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
+F:	Documentation/admin-guide/media/qcom_camss.rst
 F:	Documentation/devicetree/bindings/media/qcom,camss.txt
-F:	Documentation/media/v4l-drivers/qcom_camss.rst
 F:	drivers/media/platform/qcom/camss/
 
 QUALCOMM CORE POWER REDUCTION (CPR) AVS DRIVER
@@ -14124,7 +14160,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
-F:	drivers/media/usb/rainshadow-cec/*
+F:	drivers/media/cec/usb/rainshadow/
 
 RALINK MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
@@ -14245,7 +14281,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
 F:	Documentation/RCU/
 F:	include/linux/rcu*
 F:	kernel/rcu/
-X:	Documentation/RCU/torture.txt
+X:	Documentation/RCU/torture.rst
 X:	include/linux/srcu*.h
 X:	kernel/rcu/srcu*.c
 
@@ -14477,10 +14513,19 @@ ROCKCHIP RASTER 2D GRAPHIC ACCELERATION UNIT DRIVER
 M:	Jacob Chen <jacob-chen@iotwrt.com>
 M:	Ezequiel Garcia <ezequiel@collabora.com>
 L:	linux-media@vger.kernel.org
+L:	linux-rockchip@lists.infradead.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/rockchip-rga.txt
+F:	Documentation/devicetree/bindings/media/rockchip-rga.yaml
 F:	drivers/media/platform/rockchip/rga/
 
+ROCKCHIP VIDEO DECODER DRIVER
+M:	Ezequiel Garcia <ezequiel@collabora.com>
+L:	linux-media@vger.kernel.org
+L:	linux-rockchip@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/rockchip,vdec.yaml
+F:	drivers/staging/media/rkvdec/
+
 ROCKER DRIVER
 M:	Jiri Pirko <jiri@resnulli.us>
 L:	netdev@vger.kernel.org
@@ -14668,6 +14713,7 @@ S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	arch/s390/pci/
 F:	drivers/pci/hotplug/s390_pci_hpc.c
+F:	Documentation/s390/pci.rst
 
 S390 VFIO AP DRIVER
 M:	Tony Krowiak <akrowiak@linux.ibm.com>
@@ -14727,7 +14773,7 @@ L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/v4l-drivers/saa7134*
+F:	Documentation/driver-api/media/drivers/saa7134*
 F:	drivers/media/pci/saa7134/
 
 SAA7146 VIDEO4LINUX-2 DRIVER
@@ -16238,6 +16284,7 @@ F:	drivers/tty/serial/8250/8250_lpss.c
 
 SYNOPSYS DESIGNWARE APB GPIO DRIVER
 M:	Hoan Tran <hoan@os.amperecomputing.com>
+M:	Serge Semin <fancer.lancer@gmail.com>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
@@ -16979,7 +17026,7 @@ L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/v4l-drivers/tm6000*
+F:	Documentation/admin-guide/media/tm6000*
 F:	drivers/media/usb/tm6000/
 
 TMIO/SDHI MMC DRIVER
@@ -17035,7 +17082,7 @@ M:	Josh Triplett <josh@joshtriplett.org>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
-F:	Documentation/RCU/torture.txt
+F:	Documentation/RCU/torture.rst
 F:	kernel/locking/locktorture.c
 F:	kernel/rcu/rcuperf.c
 F:	kernel/rcu/rcutorture.c
@@ -17660,7 +17707,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://royale.zerezo.com/zr364xx/
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/media/v4l-drivers/zr364xx*
+F:	Documentation/admin-guide/media/zr364xx*
 F:	drivers/media/usb/zr364xx/
 
 USER-MODE LINUX (UML)
@@ -17809,7 +17856,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	drivers/media/platform/vicodec/*
+F:	drivers/media/test-drivers/vicodec/*
 
 VIDEO I2C POLLING DRIVER
 M:	Matt Ranostay <matt.ranostay@konsulko.com>
@@ -17840,7 +17887,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	drivers/media/platform/vimc/*
+F:	drivers/media/test-drivers/vimc/*
 
 VIRT LIB
 M:	Alex Williamson <alex.williamson@redhat.com>
@@ -18007,7 +18054,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	drivers/media/platform/vivid/*
+F:	drivers/media/test-drivers/vivid/*
 
 VLYNQ BUS
 M:	Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Makefile b/Makefile
index 679f302a8b8b..d0b712029cd1 100644
--- a/Makefile
+++ b/Makefile
@@ -499,7 +499,7 @@ export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
-export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE CFLAGS_UBSAN
+export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE CFLAGS_UBSAN CFLAGS_KCSAN
 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
@@ -920,6 +920,7 @@ endif
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 include scripts/Makefile.ubsan
+include scripts/Makefile.kcsan
 
 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 KBUILD_CPPFLAGS += $(KCPPFLAGS)
diff --git a/Next/SHA1s b/Next/SHA1s
new file mode 100644
index 000000000000..300c41b61468
--- /dev/null
+++ b/Next/SHA1s
@@ -0,0 +1,318 @@
+Name		SHA1
+----		----
+origin		1d2cc5ac6f6668cc15216d51051103c61467d7e8
+fixes		8f3d9f354286745c751374f5f1fcafee6b3f3136
+kbuild-current	ab51cac00ef2859f20a73d33a53f3a8987b65e11
+arc-current	40db9367ec1e653ea45400b69c3c7b80745b12eb
+arm-current	2c962369d72f286659e6446919f88d69b943cb4d
+arm-soc-fixes	f42ae4cd4cae92408bffec2c0a4c110447e908e0
+arm64-fixes	59bff30ad6cec6b5babc8132eb8dcb48f1c82be0
+m68k-current	86cded5fc52567774b596827544874499532b8ae
+powerpc-fixes	5990cdee689c6885b27c6d969a3d58b09002b0bc
+s390-fixes	6a8b55ed4056ea5559ebe4f6a4b247f627870d4c
+sparc		63bef48fd6c9d3f1ba4f0e23b4da1e007db6a3c0
+fscrypt-current	2b4eae95c7361e0a147b838715c8baa1380a428f
+net		30724ccbfc8325cade4a2d36cd1f75b06341d9eb
+bpf		18f02ad19e2c2a1d9e1d55a4e1c0cbf51419151c
+ipsec		c95c5f58b35ef995f66cb55547eee6093ab5fcb8
+netfilter	c165d57b552aaca607fa5daf3fb524a6efe3c5a3
+ipvs		0141317611ab913d6c227b82f3dd02ff3e6fc5d8
+wireless-drivers	10e41f34a019b1e4487de2c2941fbc212404c3fe
+mac80211		4a3de90b1184cf6d6a4d9d116009be7a26f26510
+rdma-fixes	f0abc761bbb9418876cc4d1ebc473e4ea6352e42
+sound-current	a2f647240998aa49632fb09b01388fdf2b87acfc
+sound-asoc-fixes	25abe220aec4fbf7448a8440f2453715836db8ea
+regmap-fixes	cef570d20922aa352b946975e7ab89e08295f65c
+regulator-fixes	324fa65431d44c7512d5e44d25e61603055aac11
+spi-fixes	6df8a61e68067160fc2bc88164bf339a4e68e1b4
+pci-current	ef46738cc47adb6f70d548c03bd44508f18e14a5
+driver-core.current	2a15483b401c0b07e44b43b95414e36f32c02f32
+tty.current	6a8b55ed4056ea5559ebe4f6a4b247f627870d4c
+usb.current	c3bf9930921b33edb31909006607e478751a6f5e
+usb-gadget-fixes	a7b778357ca48df71bbaad6612beaca30bd96e54
+usb-serial-fixes	e9b3c610a05c1cdf8e959a6d89c38807ff758ee6
+usb-chipidea-fixes	7cbf3dd3139ab4683d9cffe9d6972a1dbe3ecaa6
+phy		711a01806cf3d7b2abd8591f4948f3dd1854b042
+staging.current	0c1d3f2c9a0dc49d96754148b74a44eaa37bfbd8
+char-misc.current	5409e0cca53af8d2529f8398c9b05c36e25f9d2f
+soundwire-fixes	8f3d9f354286745c751374f5f1fcafee6b3f3136
+thunderbolt-fixes	9d2214b14103594efdbf33018b893b9417846d42
+input-current	5caab2da63207d6d631007f592f5219459e3454d
+crypto-current	55b3209acbb01cb02b1ee6b1afe80d83b1aab36d
+ide		63bef48fd6c9d3f1ba4f0e23b4da1e007db6a3c0
+vfio-fixes	5cbf3264bc715e9eb384e2b68601f8c02bb9a61d
+kselftest-fixes	8f3d9f354286745c751374f5f1fcafee6b3f3136
+modules-fixes	57baec7b1b0459ef885e816d8c28a9d9a62bb8de
+slave-dma-fixes	aa72f1d20ee973d68f26d46fce5e1cf6f9b7e1ca
+backlight-fixes	219d54332a09e8d8741c1e1982f5eae56099de85
+mtd-fixes	2098c564701c0dde76063dd9c5c00a7a1f173541
+mfd-fixes	603d9299da32955d49995738541f750f2ae74839
+v4l-dvb-fixes	8f3d9f354286745c751374f5f1fcafee6b3f3136
+reset-fixes	b460e0a9e2404450a0cc4c5e6476483d6cda1b26
+mips-fixes	8f3d9f354286745c751374f5f1fcafee6b3f3136
+at91-fixes	54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c
+omap-fixes	175ae3ad59ab3459652bd2ae3bbc1785aeba1bf3
+kvm-fixes	00a6a5ef39e7db3648b35c86361058854db84c83
+kvms390-fixes	2a173ec993baa6a97e7b0fb89240200a88d90746
+hwmon-fixes	ae83d0b416db002fe95601e7f97f64b59514d936
+nvdimm-fixes	f84afbdd3a9e5e10633695677b95422572f920dc
+btrfs-fixes	e661c25df0ca524717a70001f8dc2076f0bf279c
+vfs-fixes	b0d3869ce9eeacbb1bbd541909beeef4126426d5
+dma-mapping-fixes	9c24eaf81cc44d4bb38081c99eafd72ed85cf7f3
+i3c-fixes	6fbc7275c7a9ba97877050335f290341a1fd8dbf
+drivers-x86-fixes	f585c9d5436a2dbedcd6c581bcabd41d7e372e21
+samsung-krzk-fixes	8f3d9f354286745c751374f5f1fcafee6b3f3136
+pinctrl-samsung-fixes	8f3d9f354286745c751374f5f1fcafee6b3f3136
+devicetree-fixes	4bc77b2d211e107fa54b1f39cd0d7dac5537b8cb
+scsi-fixes	b36522150e5b85045f868768d46fbaaa034174b2
+drm-fixes	e32b2484b3e00170b6cf57d99a18972e174e10ea
+amdgpu-fixes	2c409ba81be25516afe05ae27a4a15da01740b01
+drm-intel-fixes	8598eb781cf68fd6cb67c479f1479ae58bd54fb9
+mmc-fixes	1a8eb6b373c2af6533c13d1ea11f504e5010ed9a
+rtc-fixes	8f3d9f354286745c751374f5f1fcafee6b3f3136
+gnss-fixes	ae83d0b416db002fe95601e7f97f64b59514d936
+hyperv-fixes	f081bbb3fd03f949bcdc5aed95a827d7c65e0f30
+soc-fsl-fixes	fe8fe7723a3a824790bda681b40efd767e2251a7
+risc-v-fixes	1d2cc5ac6f6668cc15216d51051103c61467d7e8
+pidfd-fixes	a966dcfe153ab0a3d8d79cd971a079411a489be7
+fpga-fixes	3c2760b78f90db874401d97e3c17829e2e36f400
+spdx		6a8b55ed4056ea5559ebe4f6a4b247f627870d4c
+gpio-intel-fixes	8f3d9f354286745c751374f5f1fcafee6b3f3136
+pinctrl-intel-fixes	69388e15f5078c961b9e5319e22baea4c57deff1
+erofs-fixes	d1eef1c619749b2a57e514a3fa67d9a516ffa919
+drm-misc-fixes	933db73351d359f74b14f4af095808260aff11f9
+kspp-gustavo	c298f72a534d7c3f8d6402a77cdc38f57314c666
+kbuild		b032227c62939b5481bcd45442b36dfa263f4a7c
+compiler-attributes	98d54f81e36ba3bf92172791eba5ca5bd813989b
+leaks		9e98c678c2d6ae3a17cb2de55d17f69dddaa231b
+dma-mapping	298f3db6ee690259927b105d5ad1079563361323
+asm-generic	060dc911501f6ee222569304f50962172a52b1d6
+arc		def9d2780727cec3313ed3522d0123158d87224d
+arm		44a98f79e2108ce7ea37623859c3ed20fe29dcfd
+arm64		af3701612ccd7308e2f040e9c9bf842c9fb69084
+arm-perf		8f3d9f354286745c751374f5f1fcafee6b3f3136
+arm-soc		f42ae4cd4cae92408bffec2c0a4c110447e908e0
+amlogic		add3a0d6340098545e2a772f0fa0ccbd5be914b2
+aspeed		de285b938cf330b30acfdb037d14018d38292c3e
+at91		ec539e70d882af33660bcab178a59b1251588a22
+imx-mxs		36a816eea186e3543c26e4fe571bcf50a643c18d
+keystone		560b4d4691b07819f8d3e0cb030f72f863ec1ba3
+mediatek		23a1613226584c00ac303b563b37b62cf70e2e74
+mvebu		9d32706f8aa8bbea3722e8f074801c0807d19951
+omap		1f4c797b748cd09e0efc8c7098de48c9baa6e026
+qcom		2346b073fc163b4251250506ded5a3a7d16e0be3
+raspberrypi	f5e216e4268933c565d61bedd70add4953b5f2d1
+realtek		486f29df69413411a205d3101bae0427a892bee4
+renesas		00f21412f244cfc3c71fbc2410d7c534de59792f
+reset		2ebf89fd4ecf37e7ae4c323a9fd69f9d9d0ea260
+rockchip		68c391e9f66b993d8a93b5b0fccee9af6a9cc360
+samsung-krzk	fcd1f4184e18191640f64fb585ba96ebd6126550
+scmi		a8e5f6d8ecfef5f1ea93ea072f3086461b7b6fae
+sunxi		8c42b100c050f9331a080ad5a83b3d603ba1d8b9
+tegra		a39e211f743e7ea7a0d95b1e98f331623647aeca
+clk		e7f552f727f58cbb524f3b574ac253dc3e0e7508
+clk-samsung	54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c
+c6x		8adcc59974b8a65b7eac7d503364837c297139bc
+csky		10cb08260605a6ef5a2db13e900f2f1596fba96a
+h8300		beab3d5cb0e14e6397c4e596b3dbf1d36bf49d06
+ia64		172e7890406d6183b9b39271ffb434ff0a97ce72
+m68k		366b8149fbff1965f9e25bb27dd4698d654be270
+m68knommu	012d1de8877696d49cf00441fd2e3adf61784206
+microblaze	8f3d9f354286745c751374f5f1fcafee6b3f3136
+mips		f932449c11dabb4b0588e30f35c084b910483ca5
+nds32		d785c5a324cd8812720a409dc85050558281a567
+nios2		0ec8a5054d7fc5e31509fed7893358564ede2477
+openrisc		9737e2c5f0bc768b58416ec070bd96c91c52a153
+parisc-hd	7111951b8d4973bda27ff663f2cf18b663d15b48
+powerpc		45591da765885f7320a111d290b3a28a23eed359
+fsl		a76bea0287ce13d28494b19649d80d8ee5e7b757
+soc-fsl		461c3ac0dc46ba7fc09628aadf63c81253c4c3de
+risc-v		44ab661dd29db5956b73ae7553865604f9d725fa
+sifive		467e050e9760fc31dcf854ec88401e18419f5f78
+s390		19d4c761c1d2354e6c1deb6e1d31c949028b92d6
+sh		a193018e5290ee9d9fe62ad80cd8f874711eb575
+sparc-next	b71acb0e372160167bf6d5500b88b30b52ccef6e
+uml		2e27d33d22afa3d12746f854d6a4fad7ad7b86de
+xtensa		70cbddb973859158731ce77ab20cd5e53822c089
+fscrypt		861261f2a9cc488c845fc214d9035f7a11094591
+afs		4fe171bb81b13b40bf568330ec3716dfb304ced1
+btrfs		2a716ced1526667a409d996764ae907c8af2ed1c
+ceph		2a575f138d003fff0f4930b5cfae4a1c46343b8f
+cifs		6a8b55ed4056ea5559ebe4f6a4b247f627870d4c
+configfs		8aebfffacfa379ba400da573a5bf9e49634e38cb
+ecryptfs		8b614cb8f1dcac8ca77cf4dd85f46ef3055f8238
+erofs		8f3d9f354286745c751374f5f1fcafee6b3f3136
+exfat		33cdfbe37703501327e4643796b80d5092bcb401
+ext3		a32f0ecd79b4757e417b778c8dc64916e93f7b80
+ext4		907ea529fc4c3296701d2bfc8b831dd2a8121a34
+f2fs		435cbab95e3966cd8310addd9e9b758dce0e8b84
+fsverity		98d54f81e36ba3bf92172791eba5ca5bd813989b
+fuse		75d892588e959573b321895003462d88cae2cff3
+jfs		7aba5dcc234635b44b2781dbc268048cfba388ad
+nfs		efe57fd58e1cb77f9186152ee12a8aa4ae3348e0
+nfs-anna		55dee1bc0d72877b99805e42e0205087e98b9edd
+nfsd		2653de9f0398b3230bb098704451ba16be5458f0
+orangefs		aa317d3351dee7cb0b27db808af0cd2340dcbaef
+overlayfs	23f65779dcf8e822393dce0d5b5a3befcf6f3bdf
+ubifs		3676f32a98cd6ed4481c21bceb8b4829d4b6d1cf
+v9fs		c6f141412d24c8d8a9d98ef45303c0235829044b
+xfs		f0f7a674d4df1510d8ca050a669e1420cf7d7fab
+zonefs		0dda2ddb7ded1395189e95d43106469687c07795
+iomap		457df33e035a2cffc6561992f3f25a6c61605c46
+djw-vfs		56939e014a6c212b317414faa307029e2e80c3b9
+file-locks	dbdaf6a3250b9cda6d7f761e9ff8b8bed8409a38
+vfs		ffca8b2a77f27cdaec081a8bd447f8a5c59af142
+printk		d34f14ae521f076f68f3ce213c64193f9a5a8adf
+pci		cb4b34e114544fa5e6d5fb0ec666c1a4e5793a49
+pstore		8f3d9f354286745c751374f5f1fcafee6b3f3136
+hid		f28638eb72a3181d251c7e5d1a3dc8a9dbcc50f6
+i2c		d92067dace29fef52d51cfe7553c9e70c24c91aa
+i3c		b4203ce0556348dcfe29f897d1dbe65102874d89
+dmi		8cf87c7446968660a8e997b4427be5340c2825ef
+hwmon-staging	65b7e54c6adb10314544676bdc544189180d51e7
+jc_docs		ec43a27fffd025f718428d9f4f8df22fa765405f
+v4l-dvb		e51759f56d314d28c25be7606b03791f048e44c7
+v4l-dvb-next	54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c
+fbdev		732146a3f1dc78ebb0d3c4b1f4dc6ea33cc2c58f
+pm		d38f9bc9261a2b20e8509370b5df9bdb3badaf81
+cpufreq-arm	7c2553f0db6133ba079597422391661914ce91c7
+cpupower		8f3d9f354286745c751374f5f1fcafee6b3f3136
+opp		aca48b61f963869ccbb5cf84805a7ad68bf812cd
+thermal		79799562bf087b30d9dd0fddf5bed2d3b038be08
+thermal-rzhang	54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c
+thermal-soc	6c375eccded41df8033ed55a1b785531b304fc67
+ieee1394		67f8e65e4fc19e24993e8780f41279eeffbd0610
+dlm		a48f9721e6db74dfbeb8d4a2cd616b20017f4b78
+swiotlb		4cdfb27ba80d29aa04bc340b2e4b59e9ae74004c
+rdma		a97bf49f824e357f1cc5d292e247d05271d32afe
+net-next		323e395f197fd0bc1bf7a7a7e4c67d3d7410f24f
+bpf-next		449e14bfdb83bf772200840a7ac4dcc1d7cacf54
+ipsec-next	26333c37fc285e7372f1b9461f3ae0ba3dc699c9
+mlx5-next	2dc8b5246d2c94f732c02e7a688d8a9c0c65361f
+netfilter-next	3ff7ddb1353da9b535e65702704cbadea1da9a00
+ipvs-next	d54725cd11a57c30f650260cfb0a92c268bdc3e0
+wireless-drivers-next	86501437d88532952a21b427d2ffd1683870d369
+bluetooth	f794edc99901a20cdf1bef0ba0d851a043f91eca
+mac80211-next	60689de46c7f6a0028c8b37b6f03db68cbfad8ed
+gfs2		197694d09af5b8a15c6d012c11f1b71ec094c3fa
+mtd		025a06c1104cd8995646b761d117816b5f28c873
+nand		fca88925d76978b7f20de42d8ead34fb91500003
+spi-nor		b8469159632818064084397a010f34e156a393db
+crypto		9c3d6497fbfa0911d4cd6f261762a0a7af29566a
+drm		937eea297e26effac6809a0bf8c20e6ca9d90b9a
+amdgpu		d2995eb57efad800d9388a2798c3a5e03f41f40f
+drm-intel	de3b4d9361c8a527aa91f49f779e2e378019d0f6
+drm-tegra	7573383716081620a025d8f7ffdb659efe4010fe
+drm-misc		78b0d99a68ecdc84728c99f4fef71942e9ecf35a
+drm-msm		a5fb8b918920c6f7706a8b5b8ea535a7f077a7f6
+mali-dp		f634c6a8028789b05a9277a3d51303829ae29547
+imx-drm		2c76b324c7944fedf453abca5003569d9556c6df
+etnaviv		f232d9ec029ce3e2543b05213e2979e01e503408
+regmap		6c9147d991fbe026aa5935125e287a7fcc15a70d
+sound		25cba461989c3ebf7236ec17a0ac3949dc80ce8c
+sound-asoc	d8b8d449c60448dede642a4eb61e9cad4c0f4d77
+modules		5c3a7db0c7ec4bbd5bd3f48af9be859a8fa3e532
+input		9d17ad2369dcc9beda0785cf5960222dbdd6c9df
+block		ad62de4b9bd2fbdbdde3824486ecca0f55dc3084
+device-mapper	c421cafab06538633ceaf9e62a52d4b222a30136
+pcmcia		a8c122f72d944f0e77b58c8b44a539a8f0e39017
+mmc		fa6f23de36b77b50239098acf214e671f1c8cd35
+md		e820d55cb99dd93ac2dc949cf486bb187e5cd70d
+mfd		d2923aa4535664ae5c46c3a093985afd18fec118
+backlight	ee0c8e494cc3c135350cd5c4752e82af3feae1ab
+battery		21b01cc879cc3ecef013b3576db2925adfd881aa
+regulator	79d6cf2fc9377ab85f0308a409ba07e4a0b78514
+security		3e27a33932df104f4f9ff811467b0b4ccebde773
+apparmor		01df52d726b5d55d2970f5c957f1961930acd5d6
+integrity	2592677c0486e64a08e0b930a7dfa6fbf77e6fc1
+keys		43672cf93c6d96380222064aec06e9593113cdea
+selinux		9521eb3ea19a828d8fd59a2785338fd742dbcf31
+tomoyo		8f3d9f354286745c751374f5f1fcafee6b3f3136
+tpmdd		40686e855d3cea69809d4c4646042efed4eba502
+watchdog		ae83d0b416db002fe95601e7f97f64b59514d936
+iommu		ff68eb23308e6538ec7864c83d39540f423bbe90
+vfio		f44efca0493ddc1e8731047c234ec8e475943077
+audit		a45d88530b2552ad5ea0da18861600b4ecc9d0c7
+devicetree	7456427af9def0fec5508dd8b861556038ee96a8
+mailbox		0a67003b1985c79811160af1b01aca07cd5fbc53
+spi		7f17e5a56704ba0f5da58dd5788db51c07c8087a
+tip		cf14a924b8f60e0a60f404dc3a0f023ee5f9e64c
+clockevents	c1ac28a4de6f848ef17b43ee76d1f28a219c3785
+edac		dc63e28efa1939da55f83f92732bbe969867c344
+irqchip		4cea749d56bec9409f3bd126d2b2f949dc6c66e2
+ftrace		d013496f99c5608e0f80afd67acb1ba93c4144ea
+rcu		75080313dccce0e96989fa0433abba6207b53c03
+kvm		7c67f54661fcc8d141fb11abbab1739f32e13b03
+kvm-arm		463050599742a89e0508355e626e032e8d0dab8d
+kvm-ppc		9a5788c615f52f6d7bf0b61986a632d4ec86791d
+kvms390		0b545fd17f84184f9536bde68c3521e36c488448
+xen-tip		74f4c438f22ca3fff157fb45e694805931487c55
+percpu		dedac37ea96b23c23b72d6e90f01d060d5287e4e
+workqueues	4acf8a423cd321248b4cc9eb21c11bb88931938b
+drivers-x86	14232c6e788cb1f7b96dbd08b077f90923324b24
+chrome-platform	9d33ea331032332882d4cc1a38a9d0e237126bd0
+hsi		bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9
+leds		c85c7cdef3c906d316bf04c0e452d45cf9452c67
+ipmi		900b217c7c8e510421ed0dae44c9a9a6fdefcc1f
+driver-core	48ebea5026d692c5ab0a7d303f0fe1f8ba046e0f
+usb		b9cf2cb524338c1257babb212420176e9e22f14a
+usb-gadget	4a5dbd9009570d3b23fd1392c4d178bfe3538d2c
+usb-serial	788a4ee607e8d138269fdba7c53f6f233b0e2e36
+usb-chipidea-next	4ee2fc81a631a3a2a45f3f6939323e8a5fea1e29
+phy-next		2f29298bc2d9679685b2c9bc7293b43d57fe14f4
+tty		e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe
+char-misc	48a4cc950348c507580df79632ad53d8a08b6c0e
+extcon		108339e7a4feeca5ab996f0c69e90ce2e4c07f38
+soundwire	2978a43e7690edfc816f2002aacc1bb382f50f11
+thunderbolt	57d8df68eb53cc15e5bdfc14bfb28a18543109eb
+staging		d97a9d7aea04574959178557fa4c34efed64655a
+mux		f356d58c3a04159f35003b26f8c5183f9456f95d
+icc		8f3d9f354286745c751374f5f1fcafee6b3f3136
+slave-dma	5332f8b1d9dd17c258c9461f46aa148a8c850149
+cgroup		eec8fd0277e37cf447b88c6be181e81df867bcf1
+scsi		78fb6bd02578eb1d527e5a49d1c1bc3c0f9ac836
+scsi-mkp		6f41f08c88c59ae6e32d32563c9af73ae2d71ece
+vhost		4ce332bb5eb365cc2e18bdbf010fe4ee6934d924
+rpmsg		a830779bcd3bfa6ea5314ea581588a71a1b8d7d4
+gpio		9e581cd14663a665c32039acb0577f0ea2653f46
+gpio-brgl	6fdeb6cbe1ef3bccd2c5e2b3427a06e9cda1efc2
+gpio-intel	7e73aa90a38c8815acea7af71e285658bf5ab879
+pinctrl		9e692aa8d3f8c0a98477158d6a62fe1d5988a873
+pinctrl-intel	6d649fca349155698ba4b8858b258a62003c5c54
+pinctrl-samsung	f354157a7d184db430c1a564c506434e33b1bec5
+pwm		6f0841a8197b20d01de9d41cb1eeed09b7b31f9b
+userns		507122805edd25fcda8e959b870cd897b27a05c1
+ktest		1091c8fce8aa9c5abe1a73acab4bcaf58a729005
+random		ab9a7e27044b87ff2be47b8f8e095400e7fccc44
+kselftest	f0c0d0cf590f71b2213b29a7ded2cde3d0a1a0ba
+y2038		c4e71212a245017d2ab05f322f7722f0b87a55da
+livepatching	d28b4c1b2b3d1337069cbe0bf0bec151d0e4d576
+coresight	d474fcf1eb1895b5132b403c98d3841607a0a336
+rtc		11ddbdfb68e4f9791e4bd4f8d7c87d3f19670967
+nvdimm		f6d2b802f80d0ca89ee1f51c1781b3f79cdb25d5
+at24		8f3d9f354286745c751374f5f1fcafee6b3f3136
+ntb		1b3fb49ac27b369012781b7d90b10df1fdb430e7
+kspp		c7527373fe28f97d8a196ab562db5589be0d34b9
+cisco		9e98c678c2d6ae3a17cb2de55d17f69dddaa231b
+gnss		ae83d0b416db002fe95601e7f97f64b59514d936
+fsi		2c01397b71c5e5001752046328d7f2aaf51b4c13
+slimbus		b23f2e2df6c9d7197de0ad1d176fa2ee08fb2a52
+nvmem		da50b72c08229d9becfcbb7f13088b7c792a8638
+xarray		27586ca786a729cda6c807621a1494900a56e7bc
+hyperv		df474842683c6f4d62cc8b0dc40dd9d42fdfb1f1
+auxdisplay	2f920c0f0e29268827c2894c6e8f237a78159718
+kgdb		5ea771abd5a3734dfc55dee3772ff94ecc0b6f6a
+pidfd		6952a4f646446fde9e190b62c5e45f84c6cf91aa
+devfreq		a35a2f2b3e6e54e7ceee66f4bc3720cfb7d71490
+hmm		8f3d9f354286745c751374f5f1fcafee6b3f3136
+fpga		a2b9d4eadb7727772698d06e4cbeb1a1e2538675
+kunit		8f3d9f354286745c751374f5f1fcafee6b3f3136
+cel		23cf1ee1f1869966b75518c59b5cbda4c6c92450
+generic-ioremap	4bdc0d676a643140bdf17dbf7eafedee3d496a3c
+cfi		b6fe8bc67d2d33a9eff1b0785482bccd14979115
+kunit-next	6cb1818798812fe7e2c8fe3f489ad1c86adfd6c4
+trivial		fad7c9020948eab2bc4661eade4e1ef357279590
+zx2c4		16fbf79b0f83bc752cee8589279f1ebfe57b3b6e
+mhi		8f3d9f354286745c751374f5f1fcafee6b3f3136
+akpm-current	165d3ee0162fe28efc2c8180176633e33515df15
+akpm		8d69f40b20a798eba4e1ceff4ef30a2df771aff0
diff --git a/Next/Trees b/Next/Trees
new file mode 100644
index 000000000000..746f1c4f40d8
--- /dev/null
+++ b/Next/Trees
@@ -0,0 +1,320 @@
+Trees included into this release:
+
+Name		Type	URL
+----		----	---
+origin		git	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git#master
+fixes		git	git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes.git#master
+kbuild-current	git	git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git#fixes
+arc-current	git	git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git#for-curr
+arm-current	git	git://git.armlinux.org.uk/~rmk/linux-arm.git#fixes
+arm-soc-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git#arm/fixes
+arm64-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux#for-next/fixes
+m68k-current	git	git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git#for-linus
+powerpc-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git#fixes
+s390-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git#fixes
+sparc		git	git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc.git#master
+fscrypt-current	git	git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt.git#for-stable
+net		git	git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git#master
+bpf		git	git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git#master
+ipsec		git	git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec.git#master
+netfilter	git	git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf.git#master
+ipvs		git	git://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs.git#master
+wireless-drivers	git	git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.git#master
+mac80211		git	git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git#master
+rdma-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git#for-rc
+sound-current	git	git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git#for-linus
+sound-asoc-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git#for-linus
+regmap-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git#for-linus
+regulator-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git#for-linus
+spi-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git#for-linus
+pci-current	git	git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git#for-linus
+driver-core.current	git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git#driver-core-linus
+tty.current	git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git#tty-linus
+usb.current	git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git#usb-linus
+usb-gadget-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git#fixes
+usb-serial-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git#usb-linus
+usb-chipidea-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git#ci-for-usb-stable
+phy		git	git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git#fixes
+staging.current	git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git#staging-linus
+char-misc.current	git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git#char-misc-linus
+soundwire-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git#fixes
+thunderbolt-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git#fixes
+input-current	git	git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git#for-linus
+crypto-current	git	git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git#master
+ide		git	git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide.git#master
+vfio-fixes	git	git://github.com/awilliam/linux-vfio.git#for-linus
+kselftest-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git#fixes
+modules-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git#modules-linus
+slave-dma-fixes	git	git://git.infradead.org/users/vkoul/slave-dma.git#fixes
+backlight-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight.git#for-backlight-fixes
+mtd-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git#mtd/fixes
+mfd-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git#for-mfd-fixes
+v4l-dvb-fixes	git	git://linuxtv.org/mchehab/media-next.git#fixes
+reset-fixes	git	https://git.pengutronix.de/git/pza/linux#reset/fixes
+mips-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git#mips-fixes
+at91-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git#at91-fixes
+omap-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git#fixes
+kvm-fixes	git	git://git.kernel.org/pub/scm/virt/kvm/kvm.git#master
+kvms390-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git#master
+hwmon-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git#hwmon
+nvdimm-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git#libnvdimm-fixes
+btrfs-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux.git#next-fixes
+vfs-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git#fixes
+dma-mapping-fixes	git	git://git.infradead.org/users/hch/dma-mapping.git#for-linus
+i3c-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux.git#master
+drivers-x86-fixes	git	git://git.infradead.org/linux-platform-drivers-x86.git#fixes
+samsung-krzk-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git#fixes
+pinctrl-samsung-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git#pinctrl-fixes
+devicetree-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git#dt/linus
+scsi-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git#fixes
+drm-fixes	git	git://git.freedesktop.org/git/drm/drm.git#drm-fixes
+amdgpu-fixes	git	git://people.freedesktop.org/~agd5f/linux#drm-fixes
+drm-intel-fixes	git	git://anongit.freedesktop.org/drm-intel#for-linux-next-fixes
+mmc-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git#fixes
+rtc-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git#rtc-fixes
+gnss-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss.git#gnss-linus
+hyperv-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git#hyperv-fixes
+soc-fsl-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux.git#fix
+risc-v-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git#fixes
+pidfd-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git#fixes
+fpga-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git#fixes
+spdx		git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx.git#spdx-linus
+gpio-intel-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git#fixes
+pinctrl-intel-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git#fixes
+erofs-fixes	git	git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git#fixes
+drm-misc-fixes	git	git://anongit.freedesktop.org/drm/drm-misc#for-linux-next-fixes
+kspp-gustavo	git	git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git#for-next/kspp
+kbuild		git	git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git#for-next
+compiler-attributes	git	https://github.com/ojeda/linux.git#compiler-attributes
+leaks		git	https://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks.git#leaks-next
+dma-mapping	git	git://git.infradead.org/users/hch/dma-mapping.git#for-next
+asm-generic	git	git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git#master
+arc		git	git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git#for-next
+arm		git	git://git.armlinux.org.uk/~rmk/linux-arm.git#for-next
+arm64		git	git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux#for-next/core
+arm-perf		git	git://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git#for-next/perf
+arm-soc		git	git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git#for-next
+amlogic		git	git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git#for-next
+aspeed		git	git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git#for-next
+at91		git	git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux-at91.git#at91-next
+imx-mxs		git	git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git#for-next
+keystone		git	git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git#next
+mediatek		git	git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux.git#for-next
+mvebu		git	git://git.infradead.org/linux-mvebu.git#for-next
+omap		git	git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git#for-next
+qcom		git	git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git#for-next
+raspberrypi	git	git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git#for-next
+realtek		git	git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek.git#for-next
+renesas		git	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git#next
+reset		git	https://git.pengutronix.de/git/pza/linux#reset/next
+rockchip		git	git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git#for-next
+samsung-krzk	git	git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git#for-next
+scmi		git	git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git#for-linux-next
+sunxi		git	git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git#sunxi/for-next
+tegra		git	git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git#for-next
+clk		git	git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git#clk-next
+clk-samsung	git	git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git#for-next
+c6x		git	git://linux-c6x.org/git/projects/linux-c6x-upstreaming.git#for-linux-next
+csky		git	git://github.com/c-sky/csky-linux.git#linux-next
+h8300		git	git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git#h8300-next
+ia64		git	git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git#next
+m68k		git	git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git#for-next
+m68knommu	git	git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu.git#for-next
+microblaze	git	git://git.monstr.eu/linux-2.6-microblaze.git#next
+mips		git	git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git#mips-next
+nds32		git	git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux.git#next
+nios2		git	git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git#for-next
+openrisc		git	git://github.com/openrisc/linux.git#for-next
+parisc-hd	git	git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git#for-next
+powerpc		git	git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git#next
+fsl		git	git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git#next
+soc-fsl		git	git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux.git#next
+risc-v		git	git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git#for-next
+sifive		git	git://git.kernel.org/pub/scm/linux/kernel/git/pjw/sifive.git#for-next
+s390		git	git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git#features
+sh		git	git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git#sh-next
+sparc-next	git	git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next.git#master
+uml		git	git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml.git#linux-next
+xtensa		git	git://github.com/jcmvbkbc/linux-xtensa.git#xtensa-for-next
+fscrypt		git	git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt.git#master
+afs		git	git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git#afs-next
+btrfs		git	git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux.git#for-next
+ceph		git	git://github.com/ceph/ceph-client.git#master
+cifs		git	git://git.samba.org/sfrench/cifs-2.6.git#for-next
+configfs		git	git://git.infradead.org/users/hch/configfs.git#for-next
+ecryptfs		git	git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs.git#next
+erofs		git	git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git#dev
+exfat		git	git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat.git#dev
+ext3		git	git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs.git#for_next
+ext4		git	git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4.git#dev
+f2fs		git	git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git#dev
+fsverity		git	git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt.git#fsverity
+fuse		git	git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git#for-next
+jfs		git	git://github.com/kleikamp/linux-shaggy.git#jfs-next
+nfs		git	git://git.linux-nfs.org/projects/trondmy/nfs-2.6.git#linux-next
+nfs-anna		git	git://git.linux-nfs.org/projects/anna/linux-nfs.git#linux-next
+nfsd		git	git://git.linux-nfs.org/~bfields/linux.git#nfsd-next
+orangefs		git	git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux#for-next
+overlayfs	git	git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git#overlayfs-next
+ubifs		git	git://git.infradead.org/ubifs-2.6.git#linux-next
+v9fs		git	git://github.com/martinetd/linux#9p-next
+xfs		git	git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git#for-next
+zonefs		git	git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs.git#for-next
+iomap		git	git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git#iomap-for-next
+djw-vfs		git	git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git#vfs-for-next
+file-locks	git	git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux.git#locks-next
+vfs		git	git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git#for-next
+printk		git	git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk.git#for-next
+pci		git	git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git#next
+pstore		git	git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git#for-next/pstore
+hid		git	git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git#for-next
+i2c		git	git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git#i2c/for-next
+i3c		git	git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux.git#i3c/next
+dmi		quilt	http://jdelvare.nerim.net/devel/linux/jdelvare-dmi/
+hwmon-staging	git	git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git#hwmon-next
+jc_docs		git	git://git.lwn.net/linux.git#docs-next
+v4l-dvb		git	git://linuxtv.org/media_tree.git#master
+v4l-dvb-next	git	git://linuxtv.org/mchehab/media-next.git#master
+fbdev		git	git://github.com/bzolnier/linux.git#fbdev-for-next
+pm		git	git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git#linux-next
+cpufreq-arm	git	git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git#cpufreq/arm/linux-next
+cpupower		git	git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux.git#cpupower
+opp		git	git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git#opp/linux-next
+thermal		git	git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git#thermal/linux-next
+thermal-rzhang	git	git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git#next
+thermal-soc	git	git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git#next
+ieee1394		git	git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394.git#for-next
+dlm		git	git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm.git#next
+swiotlb		git	git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git#linux-next
+rdma		git	git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git#for-next
+net-next		git	git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git#master
+bpf-next		git	git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git#master
+ipsec-next	git	git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next.git#master
+mlx5-next	git	git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git#mlx5-next
+netfilter-next	git	git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git#master
+ipvs-next	git	git://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next.git#master
+wireless-drivers-next	git	git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git#master
+bluetooth	git	git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git#master
+mac80211-next	git	git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git#master
+gfs2		git	git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git#for-next
+mtd		git	git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git#mtd/next
+nand		git	git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git#nand/next
+spi-nor		git	git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git#spi-nor/next
+crypto		git	git://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git#master
+drm		git	git://git.freedesktop.org/git/drm/drm.git#drm-next
+amdgpu		git	git://people.freedesktop.org/~agd5f/linux#drm-next
+drm-intel	git	git://anongit.freedesktop.org/drm-intel#for-linux-next
+drm-tegra	git	git://anongit.freedesktop.org/tegra/linux.git#drm/tegra/for-next
+drm-misc		git	git://anongit.freedesktop.org/drm/drm-misc#for-linux-next
+drm-msm		git	https://gitlab.freedesktop.org/drm/msm.git#msm-next
+mali-dp		git	git://linux-arm.org/linux-ld#for-upstream/mali-dp
+imx-drm		git	https://git.pengutronix.de/git/pza/linux#imx-drm/next
+etnaviv		git	https://git.pengutronix.de/git/lst/linux#etnaviv/next
+regmap		git	git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git#for-next
+sound		git	git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git#for-next
+sound-asoc	git	git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git#for-next
+modules		git	git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git#modules-next
+input		git	git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git#next
+block		git	git://git.kernel.dk/linux-block.git#for-next
+device-mapper	git	git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git#for-next
+pcmcia		git	git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux.git#pcmcia-next
+mmc		git	git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git#next
+md		git	git://git.kernel.org/pub/scm/linux/kernel/git/shli/md.git#for-next
+mfd		git	git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git#for-mfd-next
+backlight	git	git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight.git#for-backlight-next
+battery		git	git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git#for-next
+regulator	git	git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git#for-next
+security		git	git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git#next-testing
+apparmor		git	git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor#apparmor-next
+integrity	git	git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity#next-integrity
+keys		git	git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git#keys-next
+selinux		git	git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux.git#next
+tomoyo		git	https://scm.osdn.net/gitroot/tomoyo/tomoyo-test1.git#master
+tpmdd		git	git://git.infradead.org/users/jjs/linux-tpmdd.git#next
+watchdog		git	git://www.linux-watchdog.org/linux-watchdog-next.git#master
+iommu		git	git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git#next
+vfio		git	git://github.com/awilliam/linux-vfio.git#next
+audit		git	git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git#next
+devicetree	git	git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git#for-next
+mailbox		git	git://git.linaro.org/landing-teams/working/fujitsu/integration.git#mailbox-for-next
+spi		git	git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git#for-next
+tip		git	git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git#auto-latest
+clockevents	git	git://git.linaro.org/people/daniel.lezcano/linux.git#timers/drivers/next
+edac		git	git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git#edac-for-next
+irqchip		git	git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git#irq/irqchip-next
+ftrace		git	git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace.git#for-next
+rcu		git	git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git#rcu/next
+kvm		git	git://git.kernel.org/pub/scm/virt/kvm/kvm.git#linux-next
+kvm-arm		git	git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git#next
+kvm-ppc		git	git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git#kvm-ppc-next
+kvms390		git	git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git#next
+xen-tip		git	git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git#linux-next
+percpu		git	git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu.git#for-next
+workqueues	git	git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git#for-next
+drivers-x86	git	git://git.infradead.org/linux-platform-drivers-x86.git#for-next
+chrome-platform	git	git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux.git#for-next
+hsi		git	git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi.git#for-next
+leds		git	git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git#for-next
+ipmi		git	git://github.com/cminyard/linux-ipmi.git#for-next
+driver-core	git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git#driver-core-next
+usb		git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git#usb-next
+usb-gadget	git	git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git#next
+usb-serial	git	git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git#usb-next
+usb-chipidea-next	git	git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git#ci-for-usb-next
+phy-next		git	git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git#next
+tty		git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git#tty-next
+char-misc	git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git#char-misc-next
+extcon		git	git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git#extcon-next
+soundwire	git	git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git#next
+thunderbolt	git	git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git#next
+staging		git	git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git#staging-next
+mux		git	https://gitlab.com/peda-linux/mux.git#for-next
+icc		git	git://git.linaro.org/people/georgi.djakov/linux.git#icc-next
+slave-dma	git	git://git.infradead.org/users/vkoul/slave-dma.git#next
+cgroup		git	git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git#for-next
+scsi		git	git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git#for-next
+scsi-mkp		git	git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git#for-next
+vhost		git	git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git#linux-next
+rpmsg		git	git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git#for-next
+gpio		git	git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git#for-next
+gpio-brgl	git	git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git#gpio/for-next
+gpio-intel	git	git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git#for-next
+pinctrl		git	git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git#for-next
+pinctrl-intel	git	git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git#for-next
+pinctrl-samsung	git	git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git#for-next
+pwm		git	git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git#for-next
+userns		git	git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git#for-next
+ktest		git	git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest.git#for-next
+random		git	git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random.git#dev
+kselftest	git	git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git#next
+y2038		git	git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git#y2038
+livepatching	git	git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching#for-next
+coresight	git	git://git.linaro.org/kernel/coresight.git#next
+rtc		git	git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git#rtc-next
+nvdimm		git	git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git#libnvdimm-for-next
+at24		git	git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git#at24/for-next
+ntb		git	https://github.com/jonmason/ntb.git#ntb-next
+kspp		git	git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git#for-next/kspp
+cisco		git	https://github.com/daniel-walker/cisco-linux.git#for-next
+gnss		git	git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss.git#gnss-next
+fsi		git	git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi.git#next
+slimbus		git	git://git.kernel.org/pub/scm/linux/kernel/git/srini/slimbus.git#for-next
+nvmem		git	git://git.kernel.org/pub/scm/linux/kernel/git/srini/nvmem.git#for-next
+xarray		git	git://git.infradead.org/users/willy/linux-dax.git#xarray
+hyperv		git	git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git#hyperv-next
+auxdisplay	git	https://github.com/ojeda/linux.git#auxdisplay
+kgdb		git	git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux.git#kgdb/for-next
+pidfd		git	git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git#for-next
+devfreq		git	git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git#devfreq-next
+hmm		git	git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git#hmm
+fpga		git	git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git#for-next
+kunit		git	git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git#test
+cel		git	git://git.linux-nfs.org/projects/cel/cel-2.6.git#cel-next
+generic-ioremap	git	git://git.infradead.org/users/hch/ioremap.git#for-next
+cfi		git	git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git#cfi/next
+kunit-next	git	git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git#kunit
+trivial		git	git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git#for-next
+zx2c4		git	git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux.git#for-next
+mhi		git	git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi.git#mhi-next
+akpm-current	mmotm	https://www.ozlabs.org/~akpm/mmotm/
+akpm		mmotm	https://www.ozlabs.org/~akpm/mmotm/
diff --git a/Next/merge.log b/Next/merge.log
new file mode 100644
index 000000000000..eb2f88f12ca7
--- /dev/null
+++ b/Next/merge.log
@@ -0,0 +1,9746 @@
+$ date -R
+Thu, 30 Apr 2020 09:07:52 +1000
+$ git checkout master
+Already on 'master'
+$ git reset --hard stable
+HEAD is now at 96c9a7802af7 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
+Merging origin/master (1d2cc5ac6f66 Merge tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux)
+$ git merge origin/master
+Updating 96c9a7802af7..1d2cc5ac6f66
+Fast-forward
+ arch/riscv/Kconfig              |  2 +-
+ arch/riscv/kernel/sbi.c         | 17 ++++++++++-------
+ arch/riscv/kernel/stacktrace.c  |  4 ++--
+ arch/riscv/kernel/vdso/Makefile |  6 +++---
+ drivers/crypto/caam/caamalg.c   | 10 +++++++---
+ drivers/crypto/caam/caamhash.c  |  8 ++++++--
+ drivers/crypto/caam/caampkc.c   |  8 ++++++--
+ drivers/tty/hvc/Kconfig         |  2 +-
+ drivers/tty/serial/Kconfig      |  2 +-
+ 9 files changed, 37 insertions(+), 22 deletions(-)
+Merging fixes/master (8f3d9f354286 Linux 5.7-rc1)
+$ git merge fixes/master
+Already up to date.
+Merging kbuild-current/fixes (ab51cac00ef2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net)
+$ git merge kbuild-current/fixes
+Already up to date.
+Merging arc-current/for-curr (40db9367ec1e ARC: guard dsp early init against non ARCv2)
+$ git merge arc-current/for-curr
+Merge made by the 'recursive' strategy.
+ arch/arc/configs/hsdk_defconfig    | 1 +
+ arch/arc/include/asm/dsp-impl.h    | 2 ++
+ arch/arc/include/asm/entry-arcv2.h | 2 ++
+ arch/arc/kernel/Makefile           | 3 ---
+ arch/arc/kernel/ptrace.c           | 2 +-
+ arch/arc/kernel/setup.c            | 5 +++--
+ arch/arc/kernel/unwind.c           | 2 --
+ arch/arc/plat-eznps/Kconfig        | 1 +
+ 8 files changed, 10 insertions(+), 8 deletions(-)
+Merging arm-current/fixes (2c962369d72f ARM: 8970/1: decompressor: increase tag size)
+$ git merge arm-current/fixes
+Merge made by the 'recursive' strategy.
+ arch/arm/boot/compressed/vmlinux.lds.S | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+Merging arm-soc-fixes/arm/fixes (f42ae4cd4cae Merge tag 'arm-soc/for-5.7/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes)
+$ git merge arm-soc-fixes/arm/fixes
+Already up to date.
+Merging arm64-fixes/for-next/fixes (59bff30ad6ce Documentation: arm64: fix amu.rst doc warnings)
+$ git merge arm64-fixes/for-next/fixes
+Already up to date.
+Merging m68k-current/for-linus (86cded5fc525 m68k: defconfig: Update defconfigs for v5.6-rc4)
+$ git merge m68k-current/for-linus
+Already up to date.
+Merging powerpc-fixes/fixes (5990cdee689c lib/mpi: Fix building for powerpc with clang)
+$ git merge powerpc-fixes/fixes
+Already up to date.
+Merging s390-fixes/fixes (6a8b55ed4056 Linux 5.7-rc3)
+$ git merge s390-fixes/fixes
+Already up to date.
+Merging sparc/master (63bef48fd6c9 Merge branch 'akpm' (patches from Andrew))
+$ git merge sparc/master
+Already up to date.
+Merging fscrypt-current/for-stable (2b4eae95c736 fscrypt: don't evict dirty inodes after removing key)
+$ git merge fscrypt-current/for-stable
+Already up to date.
+Merging net/master (30724ccbfc83 Merge branch 'wireguard-fixes')
+$ git merge net/master
+Merge made by the 'recursive' strategy.
+ drivers/net/dsa/mv88e6xxx/chip.c                   |  4 ----
+ drivers/net/ethernet/amazon/ena/ena_netdev.h       |  2 +-
+ .../net/ethernet/aquantia/atlantic/aq_pci_func.c   |  2 +-
+ drivers/net/ethernet/broadcom/bnxt/bnxt.c          | 20 ++++++++++------
+ drivers/net/ethernet/broadcom/bnxt/bnxt.h          |  1 -
+ drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h  |  2 +-
+ drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c    | 10 ++------
+ drivers/net/ethernet/natsemi/jazzsonic.c           |  6 +++--
+ drivers/net/ethernet/toshiba/tc35815.c             |  2 +-
+ drivers/net/phy/marvell10g.c                       | 27 +++++++++++++++++++++-
+ drivers/net/wireguard/queueing.c                   |  4 +++-
+ drivers/net/wireguard/receive.c                    |  6 ++---
+ drivers/net/wireguard/send.c                       |  1 -
+ drivers/vhost/vsock.c                              | 16 +++++++++----
+ include/linux/virtio_vsock.h                       |  1 +
+ net/batman-adv/bat_v_ogm.c                         |  2 +-
+ net/batman-adv/network-coding.c                    |  9 +-------
+ net/batman-adv/sysfs.c                             |  3 ++-
+ net/core/sock.c                                    |  1 -
+ net/mptcp/protocol.c                               | 11 +++++----
+ net/mptcp/subflow.c                                |  2 +-
+ net/sched/sch_choke.c                              |  3 ++-
+ net/sched/sch_fq_codel.c                           |  2 +-
+ net/sched/sch_sfq.c                                |  9 ++++++++
+ net/tls/tls_sw.c                                   |  7 ++++--
+ net/vmw_vsock/virtio_transport_common.c            |  4 ++++
+ net/x25/x25_subr.c                                 |  6 +++++
+ 27 files changed, 104 insertions(+), 59 deletions(-)
+Merging bpf/master (18f02ad19e2c bpf: Fix sk_psock refcnt leak when receiving message)
+$ git merge bpf/master
+Merge made by the 'recursive' strategy.
+ net/ipv4/tcp_bpf.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+Merging ipsec/master (c95c5f58b35e xfrm interface: fix oops when deleting a x-netns interface)
+$ git merge ipsec/master
+Merge made by the 'recursive' strategy.
+ include/net/espintcp.h    |  1 +
+ include/uapi/linux/xfrm.h |  2 +-
+ net/ipv4/esp4_offload.c   | 17 ++++++++++-------
+ net/ipv4/ip_vti.c         | 23 ++++++++++++++++++++++-
+ net/ipv6/esp6_offload.c   | 22 ++++++++++++++++------
+ net/xfrm/espintcp.c       |  2 ++
+ net/xfrm/xfrm_device.c    |  8 +++-----
+ net/xfrm/xfrm_input.c     |  2 +-
+ net/xfrm/xfrm_interface.c | 21 +++++++++++++++++++++
+ net/xfrm/xfrm_output.c    | 12 +++++++-----
+ 10 files changed, 84 insertions(+), 26 deletions(-)
+Merging netfilter/master (c165d57b552a netfilter: nf_osf: avoid passing pointer to local var)
+$ git merge netfilter/master
+Merge made by the 'recursive' strategy.
+ net/netfilter/nf_nat_proto.c  |  4 +---
+ net/netfilter/nfnetlink_osf.c | 12 +++++++-----
+ 2 files changed, 8 insertions(+), 8 deletions(-)
+Merging ipvs/master (0141317611ab Merge branch 'hns3-fixes')
+$ git merge ipvs/master
+Already up to date.
+Merging wireless-drivers/master (10e41f34a019 MAINTAINERS: update mt76 reviewers)
+$ git merge wireless-drivers/master
+Already up to date.
+Merging mac80211/master (4a3de90b1184 mac80211: sta_info: Add lockdep condition for RCU list usage)
+$ git merge mac80211/master
+Merge made by the 'recursive' strategy.
+Merging rdma-fixes/for-rc (f0abc761bbb9 RDMA/core: Fix race between destroy and release FD object)
+$ git merge rdma-fixes/for-rc
+Already up to date.
+Merging sound-current/for-linus (a2f647240998 ALSA: hda/hdmi: fix without unlocked before return)
+$ git merge sound-current/for-linus
+Merge made by the 'recursive' strategy.
+ sound/core/oss/pcm_plugin.c   | 10 ++++++----
+ sound/pci/hda/hda_intel.c     |  9 +++++----
+ sound/pci/hda/patch_hdmi.c    |  6 +++++-
+ sound/pci/hda/patch_realtek.c |  1 +
+ sound/usb/line6/podhd.c       | 22 +++++-----------------
+ 5 files changed, 22 insertions(+), 26 deletions(-)
+Merging sound-asoc-fixes/for-linus (25abe220aec4 Merge remote-tracking branch 'asoc/for-5.7' into asoc-linus)
+$ git merge sound-asoc-fixes/for-linus
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/sound/nau8825.txt          |   2 +-
+ sound/soc/codecs/tlv320adcx140.c                   |   6 +-
+ sound/soc/codecs/wm8962.c                          |   3 +-
+ sound/soc/fsl/fsl_esai.c                           |   4 +
+ sound/soc/tegra/tegra_alc5632.c                    |   7 +-
+ sound/soc/tegra/tegra_asoc_utils.c                 | 113 ++++++++++-----------
+ sound/soc/tegra/tegra_asoc_utils.h                 |   1 -
+ sound/soc/tegra/tegra_max98090.c                   |  22 ++--
+ sound/soc/tegra/tegra_rt5640.c                     |  22 ++--
+ sound/soc/tegra/tegra_rt5677.c                     |   7 +-
+ sound/soc/tegra/tegra_sgtl5000.c                   |   7 +-
+ sound/soc/tegra/tegra_wm8753.c                     |  22 ++--
+ sound/soc/tegra/tegra_wm8903.c                     |  22 ++--
+ sound/soc/tegra/tegra_wm9712.c                     |   8 +-
+ sound/soc/tegra/trimslice.c                        |  18 +---
+ sound/soc/ti/davinci-mcasp.c                       |   4 +-
+ 16 files changed, 101 insertions(+), 167 deletions(-)
+Merging regmap-fixes/for-linus (cef570d20922 Merge remote-tracking branch 'regmap/for-5.7' into regmap-linus)
+$ git merge regmap-fixes/for-linus
+Merge made by the 'recursive' strategy.
+ drivers/base/regmap/regmap-debugfs.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+Merging regulator-fixes/for-linus (324fa65431d4 Merge remote-tracking branch 'regulator/for-5.7' into regulator-linus)
+$ git merge regulator-fixes/for-linus
+Merge made by the 'recursive' strategy.
+ drivers/regulator/qcom-rpmh-regulator.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+Merging spi-fixes/for-linus (6df8a61e6806 Merge remote-tracking branch 'spi/for-5.7' into spi-linus)
+$ git merge spi-fixes/for-linus
+Merge made by the 'recursive' strategy.
+ drivers/spi/spi-axi-spi-engine.c | 32 +++++++++++++++---------------
+ drivers/spi/spi-bcm-qspi.c       | 43 +++++++++++++++++++++-------------------
+ drivers/spi/spi-ep93xx.c         |  8 ++++++--
+ drivers/spi/spi-sc18is602.c      |  2 +-
+ drivers/spi/spi.c                |  1 +
+ 5 files changed, 47 insertions(+), 39 deletions(-)
+Merging pci-current/for-linus (ef46738cc47a MAINTAINERS: Add Rob Herring and remove Andy Murray as PCI reviewers)
+$ git merge pci-current/for-linus
+Already up to date.
+Merging driver-core.current/driver-core-linus (2a15483b401c regulator: Revert "Use driver_deferred_probe_timeout for regulator_init_complete_work")
+$ git merge driver-core.current/driver-core-linus
+Merge made by the 'recursive' strategy.
+ drivers/amba/bus.c              |  1 +
+ drivers/base/component.c        |  8 +++++---
+ drivers/base/core.c             |  7 ++++++-
+ drivers/base/dd.c               | 20 ++++++++------------
+ drivers/base/platform.c         |  2 ++
+ drivers/regulator/core.c        | 25 +++++++++++--------------
+ fs/coredump.c                   |  8 ++++++++
+ include/linux/amba/bus.h        |  1 +
+ include/linux/platform_device.h |  1 +
+ kernel/umh.c                    |  5 +++++
+ 10 files changed, 48 insertions(+), 30 deletions(-)
+Merging tty.current/tty-linus (6a8b55ed4056 Linux 5.7-rc3)
+$ git merge tty.current/tty-linus
+Already up to date.
+Merging usb.current/usb-linus (c3bf9930921b thunderbolt: Check return value of tb_sw_read() in usb4_switch_op())
+$ git merge usb.current/usb-linus
+Merge made by the 'recursive' strategy.
+ drivers/thunderbolt/usb4.c | 3 +++
+ 1 file changed, 3 insertions(+)
+Merging usb-gadget-fixes/fixes (a7b778357ca4 usb: raw-gadget: Fix copy_to/from_user() checks)
+$ git merge usb-gadget-fixes/fixes
+Already up to date.
+Merging usb-serial-fixes/usb-linus (e9b3c610a05c USB: serial: garmin_gps: add sanity checking for data length)
+$ git merge usb-serial-fixes/usb-linus
+Merge made by the 'recursive' strategy.
+ drivers/usb/serial/garmin_gps.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+Merging usb-chipidea-fixes/ci-for-usb-stable (7cbf3dd3139a usb: chipidea: udc: fix sleeping function called from invalid context)
+$ git merge usb-chipidea-fixes/ci-for-usb-stable
+Auto-merging drivers/usb/chipidea/udc.c
+Merge made by the 'recursive' strategy.
+Merging phy/fixes (711a01806cf3 phy: qualcomm: usb-hs-28nm: Prepare clocks in init)
+$ git merge phy/fixes
+Auto-merging MAINTAINERS
+Merge made by the 'recursive' strategy.
+ MAINTAINERS                                 |  1 +
+ drivers/phy/qualcomm/phy-qcom-qusb2.c       |  7 +++++++
+ drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 32 +++++++++++++++++++----------
+ 3 files changed, 29 insertions(+), 11 deletions(-)
+Merging staging.current/staging-linus (0c1d3f2c9a0d MAINTAINERS: remove entry after hp100 driver removal)
+$ git merge staging.current/staging-linus
+Auto-merging MAINTAINERS
+Merge made by the 'recursive' strategy.
+ MAINTAINERS | 5 -----
+ 1 file changed, 5 deletions(-)
+Merging char-misc.current/char-misc-linus (5409e0cca53a interconnect: qcom: Move the static keyword to the front of declaration)
+$ git merge char-misc.current/char-misc-linus
+Merge made by the 'recursive' strategy.
+ drivers/bus/mhi/core/main.c        |  2 +-
+ drivers/interconnect/qcom/osm-l3.c |  4 ++--
+ drivers/interconnect/qcom/sdm845.c | 16 ++++++++--------
+ drivers/most/core.c                |  2 +-
+ 4 files changed, 12 insertions(+), 12 deletions(-)
+Merging soundwire-fixes/fixes (8f3d9f354286 Linux 5.7-rc1)
+$ git merge soundwire-fixes/fixes
+Already up to date.
+Merging thunderbolt-fixes/fixes (9d2214b14103 thunderbolt: Check return value of tb_sw_read() in usb4_switch_op())
+$ git merge thunderbolt-fixes/fixes
+Merge made by the 'recursive' strategy.
+Merging input-current/for-linus (5caab2da6320 Input: synaptics-rmi4 - fix error return code in rmi_driver_probe())
+$ git merge input-current/for-linus
+Merge made by the 'recursive' strategy.
+ drivers/input/evdev.c                           | 19 ++++---------------
+ drivers/input/joystick/xpad.c                   | 12 ++++++++++++
+ drivers/input/keyboard/cros_ec_keyb.c           | 14 +++++---------
+ drivers/input/keyboard/dlink-dir685-touchkeys.c |  2 +-
+ drivers/input/rmi4/rmi_driver.c                 |  5 +++--
+ drivers/input/serio/i8042-x86ia64io.h           |  7 +++++++
+ drivers/input/touchscreen/elants_i2c.c          | 11 ++++++++++-
+ drivers/input/touchscreen/mms114.c              | 12 +++++-------
+ drivers/input/touchscreen/usbtouchscreen.c      |  1 +
+ 9 files changed, 48 insertions(+), 35 deletions(-)
+Merging crypto-current/master (55b3209acbb0 crypto: caam - fix the address of the last entry of S/G)
+$ git merge crypto-current/master
+Already up to date.
+Merging ide/master (63bef48fd6c9 Merge branch 'akpm' (patches from Andrew))
+$ git merge ide/master
+Already up to date.
+Merging vfio-fixes/for-linus (5cbf3264bc71 vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn())
+$ git merge vfio-fixes/for-linus
+Merge made by the 'recursive' strategy.
+ drivers/vfio/vfio_iommu_type1.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+Merging kselftest-fixes/fixes (8f3d9f354286 Linux 5.7-rc1)
+$ git merge kselftest-fixes/fixes
+Already up to date.
+Merging modules-fixes/modules-linus (57baec7b1b04 scripts/nsdeps: make sure to pass all module source files to spatch)
+$ git merge modules-fixes/modules-linus
+Already up to date.
+Merging slave-dma-fixes/fixes (aa72f1d20ee9 dmaengine: dmatest: Fix process hang when reading 'wait' parameter)
+$ git merge slave-dma-fixes/fixes
+Merge made by the 'recursive' strategy.
+ .../bindings/dma/socionext,uniphier-xdmac.yaml     |  7 ++-
+ drivers/dma/Kconfig                                |  3 +-
+ drivers/dma/dmaengine.c                            | 60 ++++++++++------------
+ drivers/dma/dmatest.c                              |  6 +--
+ drivers/dma/mmp_tdma.c                             |  5 +-
+ drivers/dma/pch_dma.c                              |  2 +-
+ drivers/dma/tegra20-apb-dma.c                      |  9 ++++
+ drivers/dma/ti/k3-psil.c                           |  1 +
+ drivers/dma/xilinx/xilinx_dma.c                    | 20 ++++----
+ include/linux/dmaengine.h                          | 12 ++---
+ 10 files changed, 65 insertions(+), 60 deletions(-)
+Merging backlight-fixes/for-backlight-fixes (219d54332a09 Linux 5.4)
+$ git merge backlight-fixes/for-backlight-fixes
+Already up to date.
+Merging mtd-fixes/mtd/fixes (2098c564701c mtd: spi-nor: Compile files in controllers/ directory)
+$ git merge mtd-fixes/mtd/fixes
+Already up to date.
+Merging mfd-fixes/for-mfd-fixes (603d9299da32 mfd: mt6397: Fix probe after changing mt6397-core)
+$ git merge mfd-fixes/for-mfd-fixes
+Already up to date.
+Merging v4l-dvb-fixes/fixes (8f3d9f354286 Linux 5.7-rc1)
+$ git merge v4l-dvb-fixes/fixes
+Already up to date.
+Merging reset-fixes/reset/fixes (b460e0a9e240 reset: intel: add unspecified HAS_IOMEM dependency)
+$ git merge reset-fixes/reset/fixes
+Already up to date.
+Merging mips-fixes/mips-fixes (8f3d9f354286 Linux 5.7-rc1)
+$ git merge mips-fixes/mips-fixes
+Already up to date.
+Merging at91-fixes/at91-fixes (54ecb8f7028c Linux 5.4-rc1)
+$ git merge at91-fixes/at91-fixes
+Already up to date.
+Merging omap-fixes/fixes (175ae3ad59ab Merge branch 'fixes-v5.7' into fixes)
+$ git merge omap-fixes/fixes
+Merge made by the 'recursive' strategy.
+ arch/arm/boot/dts/am574x-idk.dts | 4 ++++
+ arch/arm/boot/dts/dra7.dtsi      | 4 ++--
+ 2 files changed, 6 insertions(+), 2 deletions(-)
+Merging kvm-fixes/master (00a6a5ef39e7 Merge tag 'kvm-ppc-fixes-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master)
+$ git merge kvm-fixes/master
+Already up to date.
+Merging kvms390-fixes/master (2a173ec993ba MAINTAINERS: add a reviewer for KVM/s390)
+$ git merge kvms390-fixes/master
+Already up to date.
+Merging hwmon-fixes/hwmon (ae83d0b416db Linux 5.7-rc2)
+$ git merge hwmon-fixes/hwmon
+Already up to date.
+Merging nvdimm-fixes/libnvdimm-fixes (f84afbdd3a9e libnvdimm: Out of bounds read in __nd_ioctl())
+$ git merge nvdimm-fixes/libnvdimm-fixes
+Already up to date.
+Merging btrfs-fixes/next-fixes (e661c25df0ca Merge branch 'misc-5.7' into next-fixes)
+$ git merge btrfs-fixes/next-fixes
+Already up to date!
+Merge made by the 'recursive' strategy.
+Merging vfs-fixes/fixes (b0d3869ce9ee propagate_one(): mnt_set_mountpoint() needs mount_lock)
+$ git merge vfs-fixes/fixes
+Already up to date.
+Merging dma-mapping-fixes/for-linus (9c24eaf81cc4 iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU)
+$ git merge dma-mapping-fixes/for-linus
+Already up to date.
+Merging i3c-fixes/master (6fbc7275c7a9 Linux 5.2-rc7)
+$ git merge i3c-fixes/master
+Already up to date.
+Merging drivers-x86-fixes/fixes (f585c9d5436a platform/x86/intel-uncore-freq: make uncore_root_kobj static)
+$ git merge drivers-x86-fixes/fixes
+Merge made by the 'recursive' strategy.
+ drivers/platform/x86/intel-uncore-frequency.c | 2 +-
+ drivers/platform/x86/surface3_power.c         | 4 ++--
+ drivers/platform/x86/xiaomi-wmi.c             | 4 ++--
+ 3 files changed, 5 insertions(+), 5 deletions(-)
+Merging samsung-krzk-fixes/fixes (8f3d9f354286 Linux 5.7-rc1)
+$ git merge samsung-krzk-fixes/fixes
+Already up to date.
+Merging pinctrl-samsung-fixes/pinctrl-fixes (8f3d9f354286 Linux 5.7-rc1)
+$ git merge pinctrl-samsung-fixes/pinctrl-fixes
+Already up to date.
+Merging devicetree-fixes/dt/linus (4bc77b2d211e dt-bindings: phy: qcom-qusb2: Fix defaults)
+$ git merge devicetree-fixes/dt/linus
+Already up to date.
+Merging scsi-fixes/fixes (b36522150e5b scsi: ibmvscsi: Fix WARN_ON during event pool release)
+$ git merge scsi-fixes/fixes
+Merge made by the 'recursive' strategy.
+ drivers/scsi/ibmvscsi/ibmvfc.c      |  5 +++++
+ drivers/scsi/ibmvscsi/ibmvscsi.c    |  4 ----
+ drivers/scsi/qla2xxx/qla_attr.c     |  2 +-
+ drivers/scsi/qla2xxx/qla_mbx.c      |  2 +-
+ drivers/scsi/qla2xxx/qla_os.c       | 35 +++++++++++++++++------------------
+ drivers/scsi/scsi_lib.c             |  1 +
+ drivers/target/target_core_iblock.c |  2 +-
+ 7 files changed, 26 insertions(+), 25 deletions(-)
+Merging drm-fixes/drm-fixes (e32b2484b3e0 Merge tag 'drm-misc-fixes-2020-04-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes)
+$ git merge drm-fixes/drm-fixes
+Already up to date.
+Merging amdgpu-fixes/drm-fixes (2c409ba81be2 drm/radeon: fix si_enable_smc_cac() failed issue)
+$ git merge amdgpu-fixes/drm-fixes
+Already up to date.
+Merging drm-intel-fixes/for-linux-next-fixes (8598eb781cf6 drm/i915: Use proper fault mask in interrupt postinstall too)
+$ git merge drm-intel-fixes/for-linux-next-fixes
+Merge made by the 'recursive' strategy.
+ drivers/gpu/drm/i915/gem/i915_gem_tiling.c      | 20 ++++++++++++++++++--
+ drivers/gpu/drm/i915/gem/selftests/huge_pages.c | 12 ++++++++----
+ drivers/gpu/drm/i915/gt/intel_timeline.c        |  2 ++
+ drivers/gpu/drm/i915/i915_irq.c                 |  6 ++----
+ drivers/gpu/drm/i915/i915_vma.c                 | 10 ++++++----
+ 5 files changed, 36 insertions(+), 14 deletions(-)
+Merging mmc-fixes/fixes (1a8eb6b373c2 mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers)
+$ git merge mmc-fixes/fixes
+Merge made by the 'recursive' strategy.
+ drivers/mmc/core/mmc_ops.c        |  2 +-
+ drivers/mmc/host/cqhci.c          | 21 ++++++++++-----------
+ drivers/mmc/host/meson-mx-sdio.c  | 11 +----------
+ drivers/mmc/host/sdhci-msm.c      |  2 ++
+ drivers/mmc/host/sdhci-pci-core.c |  3 +++
+ drivers/mmc/host/sdhci-xenon.c    | 10 ++++++++++
+ 6 files changed, 27 insertions(+), 22 deletions(-)
+Merging rtc-fixes/rtc-fixes (8f3d9f354286 Linux 5.7-rc1)
+$ git merge rtc-fixes/rtc-fixes
+Already up to date.
+Merging gnss-fixes/gnss-linus (ae83d0b416db Linux 5.7-rc2)
+$ git merge gnss-fixes/gnss-linus
+Already up to date.
+Merging hyperv-fixes/hyperv-fixes (f081bbb3fd03 hyper-v: Remove internal types from UAPI header)
+$ git merge hyperv-fixes/hyperv-fixes
+Already up to date.
+Merging soc-fsl-fixes/fix (fe8fe7723a3a soc: fsl: dpio: register dpio irq handlers after dpio create)
+$ git merge soc-fsl-fixes/fix
+Already up to date.
+Merging risc-v-fixes/fixes (1d2cc5ac6f66 Merge tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux)
+$ git merge risc-v-fixes/fixes
+Already up to date.
+Merging pidfd-fixes/fixes (a966dcfe153a clone3: add build-time CLONE_ARGS_SIZE_VER* validity checks)
+$ git merge pidfd-fixes/fixes
+Already up to date.
+Merging fpga-fixes/fixes (3c2760b78f90 fpga: dfl: pci: fix return value of cci_pci_sriov_configure)
+$ git merge fpga-fixes/fixes
+Already up to date.
+Merging spdx/spdx-linus (6a8b55ed4056 Linux 5.7-rc3)
+$ git merge spdx/spdx-linus
+Already up to date.
+Merging gpio-intel-fixes/fixes (8f3d9f354286 Linux 5.7-rc1)
+$ git merge gpio-intel-fixes/fixes
+Already up to date.
+Merging pinctrl-intel-fixes/fixes (69388e15f507 pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler)
+$ git merge pinctrl-intel-fixes/fixes
+Merge made by the 'recursive' strategy.
+ drivers/pinctrl/intel/pinctrl-baytrail.c     |  1 +
+ drivers/pinctrl/intel/pinctrl-cherryview.c   |  4 ++++
+ drivers/pinctrl/intel/pinctrl-sunrisepoint.c | 15 ++++++++-------
+ 3 files changed, 13 insertions(+), 7 deletions(-)
+Merging erofs-fixes/fixes (d1eef1c61974 Linux 5.5-rc2)
+$ git merge erofs-fixes/fixes
+Already up to date.
+Merging drm-misc-fixes/for-linux-next-fixes (933db73351d3 drm/qxl: qxl_release use after free)
+$ git merge drm-misc-fixes/for-linux-next-fixes
+Auto-merging drivers/gpu/drm/virtio/virtgpu_kms.c
+Merge made by the 'recursive' strategy.
+ drivers/dma-buf/dma-buf.c             |  3 ++-
+ drivers/gpu/drm/drm_dp_mst_topology.c |  8 ++++++--
+ drivers/gpu/drm/drm_edid.c            |  2 +-
+ drivers/gpu/drm/qxl/qxl_cmd.c         | 10 +++++-----
+ drivers/gpu/drm/qxl/qxl_display.c     |  6 +++---
+ drivers/gpu/drm/qxl/qxl_draw.c        |  7 ++++---
+ drivers/gpu/drm/qxl/qxl_image.c       |  3 ++-
+ drivers/gpu/drm/qxl/qxl_ioctl.c       |  5 +----
+ drivers/gpu/drm/virtio/virtgpu_kms.c  | 17 ++++++-----------
+ include/uapi/linux/dma-buf.h          |  6 ++++++
+ 10 files changed, 36 insertions(+), 31 deletions(-)
+Merging kspp-gustavo/for-next/kspp (c298f72a534d uapi: revert flexible-array conversions)
+$ git merge kspp-gustavo/for-next/kspp
+Auto-merging include/uapi/linux/bpf.h
+Auto-merging include/sound/soc.h
+Auto-merging include/net/mac80211.h
+Auto-merging include/linux/kvm_host.h
+Auto-merging include/linux/dmaengine.h
+Auto-merging drivers/dma/tegra20-apb-dma.c
+Merge made by the 'recursive' strategy.
+ arch/ia64/kernel/unwind_i.h                        |  2 +-
+ arch/m68k/amiga/config.c                           |  2 +-
+ arch/m68k/tools/amiga/dmesg.c                      | 10 ++--
+ arch/mips/kernel/signal.c                          |  2 +-
+ arch/powerpc/mm/hugetlbpage.c                      |  2 +-
+ arch/powerpc/platforms/powermac/nvram.c            | 10 ++--
+ arch/sparc/kernel/cpumap.c                         |  2 +-
+ arch/sparc/kernel/ds.c                             |  8 +--
+ arch/um/drivers/vector_kern.h                      |  2 +-
+ arch/um/drivers/vhost_user.h                       |  2 +-
+ arch/x86/events/intel/bts.c                        |  2 +-
+ arch/x86/events/intel/uncore.h                     |  2 +-
+ arch/x86/kvm/vmx/vmcs.h                            |  2 +-
+ block/partitions/ldm.h                             |  2 +-
+ drivers/amba/tegra-ahb.c                           |  2 +-
+ drivers/block/drbd/drbd_int.h                      |  2 +-
+ drivers/block/drbd/drbd_protocol.h                 |  8 +--
+ drivers/block/rbd_types.h                          |  2 +-
+ drivers/crypto/chelsio/chcr_crypto.h               |  8 +--
+ drivers/dma/at_hdmac_regs.h                        |  2 +-
+ drivers/dma/at_xdmac.c                             |  2 +-
+ drivers/dma/milbeaut-hdmac.c                       |  2 +-
+ drivers/dma/milbeaut-xdmac.c                       |  2 +-
+ drivers/dma/moxart-dma.c                           |  2 +-
+ drivers/dma/qcom/bam_dma.c                         |  2 +-
+ drivers/dma/tegra20-apb-dma.c                      |  2 +-
+ drivers/dma/ti/edma.c                              |  2 +-
+ drivers/dma/ti/k3-udma.c                           |  2 +-
+ drivers/dma/timb_dma.c                             |  2 +-
+ drivers/firewire/core-cdev.c                       |  2 +-
+ drivers/firewire/core-transaction.c                |  2 +-
+ drivers/firewire/core.h                            |  2 +-
+ drivers/firewire/nosy.c                            |  2 +-
+ drivers/firewire/ohci.c                            |  2 +-
+ drivers/firmware/dmi-sysfs.c                       |  2 +-
+ drivers/firmware/google/memconsole-coreboot.c      |  2 +-
+ drivers/firmware/google/vpd.c                      |  2 +-
+ drivers/firmware/iscsi_ibft.c                      |  2 +-
+ drivers/firmware/pcdp.h                            |  2 +-
+ drivers/firmware/qcom_scm-legacy.c                 |  2 +-
+ drivers/fpga/dfl.h                                 |  2 +-
+ drivers/gnss/serial.h                              |  2 +-
+ drivers/gpu/drm/i915/display/intel_vbt_defs.h      |  4 +-
+ drivers/gpu/drm/i915/gt/intel_lrc.c                |  2 +-
+ drivers/gpu/drm/i915/i915_gpu_error.h              |  2 +-
+ drivers/greybus/arpc.h                             |  2 +-
+ drivers/hwtracing/stm/policy.c                     |  2 +-
+ drivers/hwtracing/stm/stm.h                        |  4 +-
+ drivers/input/keyboard/applespi.c                  |  2 +-
+ drivers/md/dm-crypt.c                              |  2 +-
+ drivers/md/dm-integrity.c                          |  2 +-
+ drivers/md/dm-log-writes.c                         |  2 +-
+ drivers/md/dm-raid.c                               |  2 +-
+ drivers/md/dm-raid1.c                              |  2 +-
+ drivers/md/dm-stats.c                              |  2 +-
+ drivers/md/dm-stripe.c                             |  2 +-
+ drivers/md/dm-switch.c                             |  2 +-
+ drivers/md/md-linear.h                             |  2 +-
+ drivers/md/persistent-data/dm-btree-internal.h     |  2 +-
+ drivers/md/raid1.h                                 |  2 +-
+ drivers/md/raid10.h                                |  2 +-
+ drivers/media/i2c/s5k5baf.c                        |  2 +-
+ drivers/media/platform/qcom/venus/hfi_cmds.h       |  2 +-
+ drivers/media/platform/qcom/venus/hfi_msgs.h       | 10 ++--
+ drivers/media/usb/pwc/pwc.h                        |  2 +-
+ drivers/net/can/peak_canfd/peak_pciefd_main.c      |  4 +-
+ drivers/net/ethernet/amd/atarilance.c              |  2 +-
+ drivers/net/ethernet/i825xx/sun3_82586.h           | 10 ++--
+ .../net/ethernet/mellanox/mlxsw/spectrum_span.c    |  2 +-
+ drivers/net/wireless/ath/ath10k/ce.h               |  2 +-
+ drivers/net/wireless/ath/ath10k/core.h             |  2 +-
+ drivers/net/wireless/ath/ath10k/coredump.h         |  4 +-
+ drivers/net/wireless/ath/ath10k/debug.h            |  2 +-
+ drivers/net/wireless/ath/ath10k/htt.h              | 42 ++++++-------
+ drivers/net/wireless/ath/ath10k/hw.h               |  2 +-
+ drivers/net/wireless/ath/ath10k/pci.h              |  2 +-
+ drivers/net/wireless/ath/ath10k/wmi-tlv.h          |  6 +-
+ drivers/net/wireless/ath/ath10k/wmi.h              | 42 ++++++-------
+ drivers/net/wireless/ath/ath11k/debug.h            |  4 +-
+ drivers/net/wireless/ath/ath11k/debug_htt_stats.h  |  8 +--
+ drivers/net/wireless/ath/ath11k/hal_desc.h         |  4 +-
+ drivers/net/wireless/ath/ath11k/hal_rx.h           |  2 +-
+ drivers/net/wireless/ath/ath11k/hw.h               |  2 +-
+ drivers/net/wireless/ath/ath11k/wmi.h              |  2 +-
+ drivers/net/wireless/ath/ath6kl/core.h             |  4 +-
+ drivers/net/wireless/ath/ath6kl/debug.c            |  2 +-
+ drivers/net/wireless/ath/ath6kl/hif.h              |  2 +-
+ drivers/net/wireless/ath/carl9170/fwcmd.h          |  2 +-
+ drivers/net/wireless/ath/carl9170/hw.h             |  2 +-
+ drivers/net/wireless/ath/wcn36xx/hal.h             |  4 +-
+ drivers/net/wireless/ath/wcn36xx/testmode.h        |  2 +-
+ drivers/net/wireless/ath/wil6210/fw.h              | 16 ++---
+ drivers/net/wireless/ath/wil6210/wmi.c             |  2 +-
+ drivers/net/wireless/ath/wil6210/wmi.h             | 58 +++++++++---------
+ drivers/net/wireless/intel/ipw2x00/ipw2200.c       |  2 +-
+ drivers/net/wireless/intel/ipw2x00/ipw2200.h       | 10 ++--
+ drivers/net/wireless/intel/ipw2x00/libipw.h        | 28 ++++-----
+ drivers/net/wireless/intel/iwlegacy/commands.h     | 22 +++----
+ drivers/net/wireless/intel/iwlegacy/iwl-spectrum.h |  4 +-
+ drivers/net/wireless/intel/iwlwifi/dvm/commands.h  | 12 ++--
+ .../net/wireless/intel/iwlwifi/fw/api/nvm-reg.h    |  4 +-
+ drivers/net/wireless/intel/iwlwifi/fw/debugfs.c    |  2 +-
+ drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h   |  2 +-
+ drivers/net/wireless/intel/iwlwifi/iwl-trans.h     |  2 +-
+ drivers/net/wireless/intersil/prism54/isl_oid.h    |  8 +--
+ drivers/net/wireless/intersil/prism54/islpci_mgt.h |  2 +-
+ drivers/net/wireless/marvell/mwl8k.c               |  2 +-
+ drivers/net/wireless/quantenna/qtnfmac/bus.h       |  2 +-
+ drivers/net/wireless/quantenna/qtnfmac/qlink.h     | 54 ++++++++---------
+ drivers/net/wireless/rndis_wlan.c                  |  8 +--
+ drivers/nvme/host/fc.c                             |  2 +-
+ drivers/nvme/host/lightnvm.c                       |  2 +-
+ drivers/oprofile/cpu_buffer.h                      |  2 +-
+ drivers/pci/pci.c                                  |  2 +-
+ drivers/phy/samsung/phy-samsung-usb2.h             |  2 +-
+ drivers/pnp/pnpbios/pnpbios.h                      |  2 +-
+ drivers/rapidio/rio-scan.c                         |  2 +-
+ drivers/rpmsg/virtio_rpmsg_bus.c                   |  2 +-
+ drivers/scsi/aic94xx/aic94xx_sds.c                 | 14 ++---
+ drivers/scsi/ufs/ufshcd.c                          |  2 +-
+ drivers/soc/ti/knav_qmss.h                         |  2 +-
+ drivers/thermal/imx8mm_thermal.c                   |  2 +-
+ drivers/w1/w1_netlink.h                            |  4 +-
+ fs/aio.c                                           |  2 +-
+ fs/binfmt_elf.c                                    |  2 +-
+ fs/dlm/dlm_internal.h                              |  6 +-
+ fs/dlm/user.c                                      |  2 +-
+ fs/hfs/btree.h                                     |  2 +-
+ fs/hfsplus/hfsplus_fs.h                            |  2 +-
+ fs/isofs/rock.h                                    |  8 +--
+ fs/jffs2/nodelist.h                                |  2 +-
+ fs/jffs2/summary.h                                 |  4 +-
+ fs/jfs/jfs_dtree.c                                 |  2 +-
+ fs/jfs/jfs_xattr.h                                 |  4 +-
+ fs/notify/fanotify/fanotify.h                      |  2 +-
+ fs/select.c                                        |  4 +-
+ fs/squashfs/squashfs_fs.h                          | 16 ++---
+ fs/xfs/libxfs/xfs_format.h                         |  2 +-
+ include/drm/drm_displayid.h                        |  2 +-
+ include/keys/encrypted-type.h                      |  2 +-
+ include/keys/rxrpc-type.h                          |  4 +-
+ include/keys/user-type.h                           |  2 +-
+ include/linux/audit.h                              |  2 +-
+ include/linux/can/skb.h                            |  2 +-
+ include/linux/cb710.h                              |  2 +-
+ include/linux/ceph/mon_client.h                    |  2 +-
+ include/linux/crush/crush.h                        |  2 +-
+ include/linux/dma/ti-cppi5.h                       |  4 +-
+ include/linux/dmaengine.h                          |  4 +-
+ include/linux/efi.h                                |  2 +-
+ include/linux/fs.h                                 |  4 +-
+ include/linux/fscache-cache.h                      |  2 +-
+ include/linux/fsl/bestcomm/bestcomm.h              |  2 +-
+ include/linux/greybus/greybus_protocols.h          | 44 +++++++-------
+ include/linux/hyperv.h                             | 10 ++--
+ include/linux/i2c-mux.h                            |  2 +-
+ include/linux/ieee80211.h                          |  6 +-
+ include/linux/if_team.h                            |  2 +-
+ include/linux/kexec.h                              |  2 +-
+ include/linux/kprobes.h                            |  2 +-
+ include/linux/kvm_host.h                           |  2 +-
+ include/linux/libata.h                             |  2 +-
+ include/linux/mailbox/zynqmp-ipi-message.h         |  2 +-
+ include/linux/memstick.h                           |  2 +-
+ include/linux/mlx4/qp.h                            |  2 +-
+ include/linux/mlx5/driver.h                        |  2 +-
+ include/linux/mlx5/mlx5_ifc.h                      | 70 +++++++++++-----------
+ include/linux/mlx5/qp.h                            |  2 +-
+ include/linux/mm.h                                 |  2 +-
+ include/linux/mtd/cfi.h                            |  6 +-
+ include/linux/mtd/qinfo.h                          |  2 +-
+ include/linux/nfs4.h                               |  2 +-
+ include/linux/nfs_xdr.h                            |  2 +-
+ include/linux/nvme.h                               |  2 +-
+ include/linux/pci.h                                |  4 +-
+ include/linux/perf_event.h                         |  6 +-
+ include/linux/platform_data/cros_ec_commands.h     |  4 +-
+ include/linux/platform_data/cros_ec_proto.h        |  2 +-
+ include/linux/remoteproc.h                         |  6 +-
+ include/linux/sctp.h                               | 36 +++++------
+ include/linux/thunderbolt.h                        |  2 +-
+ include/linux/tifm.h                               |  2 +-
+ include/linux/tty.h                                |  2 +-
+ include/net/bluetooth/l2cap.h                      |  6 +-
+ include/net/bluetooth/mgmt.h                       | 40 ++++++-------
+ include/net/cfg80211.h                             |  8 +--
+ include/net/if_inet6.h                             |  2 +-
+ include/net/mac80211.h                             | 10 ++--
+ include/pcmcia/cistpl.h                            | 40 ++++++-------
+ include/rdma/rdmavt_qp.h                           |  2 +-
+ include/scsi/sas.h                                 |  8 +--
+ include/sound/control.h                            |  2 +-
+ include/sound/intel-nhlt.h                         |  6 +-
+ include/sound/soc-dapm.h                           |  2 +-
+ include/sound/soc.h                                |  2 +-
+ include/uapi/linux/bpf.h                           |  2 +-
+ include/uapi/linux/dlm_device.h                    |  4 +-
+ include/uapi/linux/fiemap.h                        |  2 +-
+ include/uapi/linux/if_arcnet.h                     |  6 +-
+ include/uapi/linux/mmc/ioctl.h                     |  2 +-
+ include/uapi/linux/net_dropmon.h                   |  4 +-
+ include/uapi/linux/netfilter_bridge/ebt_among.h    |  2 +-
+ include/uapi/scsi/scsi_bsg_fc.h                    |  2 +-
+ kernel/bpf/queue_stack_maps.c                      |  2 +-
+ kernel/events/callchain.c                          |  2 +-
+ kernel/events/internal.h                           |  2 +-
+ kernel/locking/lockdep.c                           |  2 +-
+ kernel/params.c                                    |  2 +-
+ kernel/sched/fair.c                                |  2 +-
+ kernel/sched/sched.h                               |  2 +-
+ kernel/trace/trace_probe.h                         |  2 +-
+ kernel/tracepoint.c                                |  2 +-
+ mm/slab.h                                          |  2 +-
+ net/mac80211/ieee80211_i.h                         |  2 +-
+ net/wireless/core.h                                |  2 +-
+ samples/mei/mei-amt-version.c                      |  2 +-
+ scripts/basic/fixdep.c                             |  2 +-
+ scripts/kallsyms.c                                 |  2 +-
+ scripts/mod/modpost.c                              |  2 +-
+ scripts/mod/modpost.h                              |  2 +-
+ security/apparmor/apparmorfs.c                     |  2 +-
+ security/integrity/ima/ima.h                       |  2 +-
+ security/integrity/integrity.h                     |  4 +-
+ sound/core/oss/pcm_plugin.h                        |  2 +-
+ sound/firewire/fireworks/fireworks.h               |  2 +-
+ sound/soc/intel/atom/sst-atom-controls.h           |  2 +-
+ sound/soc/intel/skylake/skl-i2s.h                  |  2 +-
+ sound/soc/intel/skylake/skl-topology.h             |  4 +-
+ sound/soc/intel/skylake/skl.h                      |  2 +-
+ sound/soc/sof/probe.h                              |  8 +--
+ sound/usb/usx2y/usbusx2y.h                         |  2 +-
+ tools/lib/bpf/libbpf.c                             |  2 +-
+ tools/lib/bpf/libbpf_internal.h                    |  2 +-
+ tools/perf/bench/sched-messaging.c                 |  2 +-
+ tools/perf/builtin-inject.c                        |  2 +-
+ tools/perf/builtin-script.c                        |  2 +-
+ tools/perf/builtin-timechart.c                     |  2 +-
+ tools/perf/util/annotate.h                         |  4 +-
+ tools/perf/util/branch.h                           |  2 +-
+ tools/perf/util/cputopo.h                          |  2 +-
+ tools/perf/util/dso.h                              |  4 +-
+ tools/perf/util/event.h                            |  2 +-
+ tools/perf/util/jitdump.c                          |  2 +-
+ tools/perf/util/jitdump.h                          |  6 +-
+ tools/perf/util/ordered-events.h                   |  2 +-
+ tools/perf/util/pstack.c                           |  2 +-
+ tools/perf/util/symbol.h                           |  2 +-
+ tools/perf/util/unwind-libunwind-local.c           |  2 +-
+ tools/testing/nvdimm/test/nfit_test.h              |  6 +-
+ .../testing/selftests/bpf/progs/core_reloc_types.h |  2 +-
+ tools/testing/selftests/nsfs/pidns.c               |  2 +-
+ tools/testing/selftests/powerpc/pmu/ebb/trace.h    |  4 +-
+ 252 files changed, 611 insertions(+), 611 deletions(-)
+Merging kbuild/for-next (b032227c6293 Merge tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2)
+$ git merge kbuild/for-next
+Already up to date.
+Merging compiler-attributes/compiler-attributes (98d54f81e36b Linux 5.6-rc4)
+$ git merge compiler-attributes/compiler-attributes
+Already up to date.
+Merging leaks/leaks-next (9e98c678c2d6 Linux 5.1-rc1)
+$ git merge leaks/leaks-next
+Already up to date.
+Merging dma-mapping/for-next (298f3db6ee69 dma-contiguous: fix comment for dma_release_from_contiguous)
+$ git merge dma-mapping/for-next
+Auto-merging arch/x86/Kconfig
+Merge made by the 'recursive' strategy.
+ arch/x86/Kconfig            |   1 +
+ drivers/iommu/dma-iommu.c   |   5 +-
+ include/linux/dma-direct.h  |   2 +
+ include/linux/dma-mapping.h |   6 +-
+ kernel/dma/Kconfig          |   6 +-
+ kernel/dma/Makefile         |   1 +
+ kernel/dma/contiguous.c     |   4 +-
+ kernel/dma/debug.c          |   2 +-
+ kernel/dma/direct.c         |  56 ++++++++--
+ kernel/dma/pool.c           | 264 ++++++++++++++++++++++++++++++++++++++++++++
+ kernel/dma/remap.c          | 121 +-------------------
+ 11 files changed, 327 insertions(+), 141 deletions(-)
+ create mode 100644 kernel/dma/pool.c
+Merging asm-generic/master (060dc911501f nds32: fix build failure caused by page table folding updates)
+$ git merge asm-generic/master
+Already up to date.
+Merging arc/for-next (def9d2780727 Linux 5.5-rc7)
+$ git merge arc/for-next
+Already up to date.
+Merging arm/for-next (44a98f79e210 Merge branches 'fixes' and 'misc' into for-next)
+$ git merge arm/for-next
+Removing arch/arm/boot/compressed/libfdt_env.h
+Auto-merging arch/arm/boot/compressed/head.S
+Merge made by the 'recursive' strategy.
+ arch/arm/boot/compressed/.gitignore                |  9 ----
+ arch/arm/boot/compressed/Makefile                  | 41 +++++++---------
+ arch/arm/boot/compressed/atags_to_fdt.c            |  1 +
+ arch/arm/boot/compressed/fdt.c                     |  2 +
+ arch/arm/boot/compressed/fdt_get_mem_start.c       | 56 ++++++++++++++++++++++
+ arch/arm/boot/compressed/fdt_ro.c                  |  2 +
+ arch/arm/boot/compressed/fdt_rw.c                  |  2 +
+ arch/arm/boot/compressed/fdt_wip.c                 |  2 +
+ arch/arm/boot/compressed/head.S                    | 54 ++++++++++++++++++++-
+ arch/arm/boot/compressed/libfdt_env.h              | 24 ----------
+ arch/arm/include/asm/assembler.h                   |  3 +-
+ arch/arm/kernel/sys_oabi-compat.c                  | 15 ++----
+ drivers/gpu/drm/armada/armada_drv.c                |  2 +-
+ .../gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c    |  2 +-
+ drivers/gpu/drm/etnaviv/etnaviv_drv.c              |  2 +-
+ drivers/media/cec/cec-notifier.c                   |  2 +-
+ drivers/net/phy/swphy.c                            |  2 +-
+ include/media/cec-notifier.h                       |  2 +-
+ 18 files changed, 148 insertions(+), 75 deletions(-)
+ create mode 100644 arch/arm/boot/compressed/fdt.c
+ create mode 100644 arch/arm/boot/compressed/fdt_get_mem_start.c
+ create mode 100644 arch/arm/boot/compressed/fdt_ro.c
+ create mode 100644 arch/arm/boot/compressed/fdt_rw.c
+ create mode 100644 arch/arm/boot/compressed/fdt_wip.c
+ delete mode 100644 arch/arm/boot/compressed/libfdt_env.h
+Merging arm64/for-next/core (af3701612ccd Merge branch 'for-next/bti' into for-next/core)
+$ git merge arm64/for-next/core
+Auto-merging include/linux/mm.h
+Auto-merging fs/binfmt_elf.c
+Merge made by the 'recursive' strategy.
+ Documentation/arm64/booting.rst               |   3 +-
+ Documentation/arm64/cpu-feature-registers.rst |   2 +
+ Documentation/arm64/elf_hwcaps.rst            |   5 +
+ Documentation/arm64/silicon-errata.rst        |   8 +-
+ Documentation/filesystems/proc.rst            |  34 +---
+ arch/arm64/Kconfig                            |  25 +++
+ arch/arm64/Makefile                           |   5 +-
+ arch/arm64/include/asm/asm_pointer_auth.h     |  43 +++-
+ arch/arm64/include/asm/cpucaps.h              |   4 +-
+ arch/arm64/include/asm/cpufeature.h           |  13 ++
+ arch/arm64/include/asm/elf.h                  |  50 +++++
+ arch/arm64/include/asm/esr.h                  |   2 +-
+ arch/arm64/include/asm/exception.h            |   1 +
+ arch/arm64/include/asm/hwcap.h                |   1 +
+ arch/arm64/include/asm/kvm_emulate.h          |   6 +-
+ arch/arm64/include/asm/mman.h                 |  37 ++++
+ arch/arm64/include/asm/pgtable-hwdef.h        |   2 +-
+ arch/arm64/include/asm/pgtable.h              |   9 +-
+ arch/arm64/include/asm/ptrace.h               |   1 +
+ arch/arm64/include/asm/smp.h                  |  11 -
+ arch/arm64/include/asm/sysreg.h               |  33 ++-
+ arch/arm64/include/uapi/asm/hwcap.h           |   1 +
+ arch/arm64/include/uapi/asm/mman.h            |   9 +
+ arch/arm64/include/uapi/asm/ptrace.h          |   9 +
+ arch/arm64/kernel/asm-offsets.c               |   3 -
+ arch/arm64/kernel/cpufeature.c                | 280 ++++++++++++++++++++------
+ arch/arm64/kernel/cpuinfo.c                   |   1 +
+ arch/arm64/kernel/efi-entry.S                 |   2 +-
+ arch/arm64/kernel/efi-header.S                |   2 +-
+ arch/arm64/kernel/entry-common.c              |  13 +-
+ arch/arm64/kernel/entry.S                     |   4 +-
+ arch/arm64/kernel/head.S                      |  43 ++--
+ arch/arm64/kernel/image-vars.h                |   2 +-
+ arch/arm64/kernel/machine_kexec_file.c        |   8 +-
+ arch/arm64/kernel/process.c                   |  41 +++-
+ arch/arm64/kernel/ptrace.c                    |   2 +-
+ arch/arm64/kernel/signal.c                    |  16 ++
+ arch/arm64/kernel/sleep.S                     |   1 -
+ arch/arm64/kernel/smp.c                       |  10 +-
+ arch/arm64/kernel/syscall.c                   |  18 ++
+ arch/arm64/kernel/traps.c                     | 131 ++++++------
+ arch/arm64/kernel/vdso.c                      | 149 +++++++-------
+ arch/arm64/kernel/vdso/Makefile               |   8 +-
+ arch/arm64/kernel/vmlinux.lds.S               |  18 +-
+ arch/arm64/kvm/reset.c                        |  12 +-
+ arch/arm64/lib/copy_from_user.S               |  32 +--
+ arch/arm64/lib/copy_in_user.S                 |  32 +--
+ arch/arm64/lib/copy_to_user.S                 |  32 +--
+ arch/arm64/lib/crc32.S                        |   2 +-
+ arch/arm64/lib/memcpy.S                       |  32 +--
+ arch/arm64/mm/dump.c                          |   5 +
+ arch/arm64/mm/proc.S                          |  46 +----
+ drivers/acpi/arm64/iort.c                     |  11 +-
+ fs/Kconfig.binfmt                             |   6 +
+ fs/binfmt_elf.c                               | 145 ++++++++++++-
+ fs/compat_binfmt_elf.c                        |   4 +
+ fs/proc/task_mmu.c                            |   3 +
+ include/linux/elf.h                           |  43 ++++
+ include/linux/mm.h                            |   3 +
+ include/uapi/linux/elf.h                      |  11 +
+ 60 files changed, 1020 insertions(+), 465 deletions(-)
+ create mode 100644 arch/arm64/include/asm/mman.h
+ create mode 100644 arch/arm64/include/uapi/asm/mman.h
+Merging arm-perf/for-next/perf (8f3d9f354286 Linux 5.7-rc1)
+$ git merge arm-perf/for-next/perf
+Already up to date.
+Merging arm-soc/for-next (f42ae4cd4cae Merge tag 'arm-soc/for-5.7/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes)
+$ git merge arm-soc/for-next
+Already up to date.
+Merging amlogic/for-next (add3a0d63400 Merge branch 'v5.8/dt64' into tmp/aml-rebuild)
+$ git merge amlogic/for-next
+Merge made by the 'recursive' strategy.
+ arch/arm64/boot/dts/amlogic/meson-axg.dtsi         |  6 +--
+ arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi  |  2 +-
+ arch/arm64/boot/dts/amlogic/meson-g12.dtsi         |  1 -
+ .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi   | 22 ++++++-----
+ arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi  | 15 ++++++++
+ .../boot/dts/amlogic/meson-g12b-ugoos-am6.dts      |  4 +-
+ .../boot/dts/amlogic/meson-gx-libretech-pc.dtsi    |  7 ++--
+ .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi |  3 +-
+ arch/arm64/boot/dts/amlogic/meson-gx.dtsi          | 10 ++---
+ arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts |  2 +-
+ .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts      |  2 +-
+ .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts    |  2 +-
+ .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |  2 +-
+ .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi      |  2 +-
+ .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts    |  4 +-
+ arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi  |  2 +-
+ .../dts/amlogic/meson-gxl-s805x-libretech-ac.dts   |  3 +-
+ .../boot/dts/amlogic/meson-gxl-s805x-p241.dts      |  3 +-
+ .../dts/amlogic/meson-gxl-s905d-phicomm-n1.dts     |  4 ++
+ .../boot/dts/amlogic/meson-gxl-s905w-p281.dts      |  4 ++
+ .../boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts  |  4 ++
+ .../dts/amlogic/meson-gxl-s905x-khadas-vim.dts     |  4 ++
+ .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts   |  7 ++--
+ .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts    |  3 +-
+ .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi     |  3 +-
+ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         | 45 ++++++++++++----------
+ .../boot/dts/amlogic/meson-gxm-khadas-vim2.dts     |  3 +-
+ .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |  3 +-
+ arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts |  4 +-
+ arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts |  4 ++
+ arch/arm64/boot/dts/amlogic/meson-gxm.dtsi         |  7 +++-
+ arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi |  4 +-
+ arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts   |  2 +-
+ 33 files changed, 124 insertions(+), 69 deletions(-)
+Merging aspeed/for-next (de285b938cf3 ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes)
+$ git merge aspeed/for-next
+Auto-merging arch/arm/boot/dts/aspeed-g6.dtsi
+Auto-merging arch/arm/boot/dts/aspeed-g5.dtsi
+Auto-merging arch/arm/boot/dts/aspeed-g4.dtsi
+Merge made by the 'recursive' strategy.
+ .../arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts |  74 ++++++++++
+ .../boot/dts/aspeed-bmc-facebook-yosemitev2.dts    | 151 +++++++++++++++++++++
+ arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts       |  21 +++
+ arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts        |   4 +
+ arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts   |  34 +++++
+ arch/arm/boot/dts/aspeed-g4.dtsi                   |  10 ++
+ arch/arm/boot/dts/aspeed-g5.dtsi                   |  19 +++
+ arch/arm/boot/dts/aspeed-g6.dtsi                   |  38 ++++++
+ 8 files changed, 351 insertions(+)
+ create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
+Merging at91/at91-next (ec539e70d882 Merge branches 'at91-soc', 'at91-dt' and 'at91-defconfig' into at91-next)
+$ git merge at91/at91-next
+Already up to date!
+Merge made by the 'recursive' strategy.
+Merging imx-mxs/for-next (36a816eea186 Merge branch 'imx/defconfig' into for-next)
+$ git merge imx-mxs/for-next
+Merge made by the 'recursive' strategy.
+ Documentation/devicetree/bindings/arm/fsl.yaml     |   4 +
+ Documentation/devicetree/bindings/dma/fsl-edma.txt |   3 +-
+ arch/arm/boot/dts/Makefile                         |   1 +
+ arch/arm/boot/dts/e60k02.dtsi                      |   2 +
+ arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts   |   4 +-
+ arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts  |  31 ++
+ arch/arm/boot/dts/imx6dl-yapp4-ursa.dts            |   2 +-
+ arch/arm/boot/dts/imx6q-dhcom-pdk2.dts             | 115 +++++-
+ arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi    |  44 +++
+ arch/arm/boot/dts/imx6qdl-colibri.dtsi             |  11 +-
+ arch/arm/boot/dts/imx6qdl-sr-som.dtsi              |  11 +
+ arch/arm/boot/dts/imx7-tqma7.dtsi                  |   2 +-
+ arch/arm/boot/dts/imx7d-cl-som-imx7.dts            |   4 +
+ arch/arm/boot/dts/imx7d-colibri.dtsi               |   4 +
+ arch/arm/boot/dts/imx7d-nitrogen7.dts              |   4 +
+ arch/arm/boot/dts/imx7d-sdb.dts                    |   4 +
+ arch/arm/boot/dts/imx7d-tqma7.dtsi                 |   4 +
+ arch/arm/boot/dts/imx7d-zii-rmu2.dts               |   2 +-
+ arch/arm/boot/dts/imx7d-zii-rpu2.dts               |   2 +-
+ arch/arm/boot/dts/ls1021a-twr.dts                  |  14 +
+ arch/arm/mach-imx/cpu.c                            |  16 +
+ arch/arm/mach-imx/mach-vf610.c                     |  53 +++
+ arch/arm/mach-imx/mxc.h                            |   6 +
+ arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts |  15 +
+ arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts |  15 +
+ arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts  |  15 +
+ arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts  |  15 +
+ arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     |  13 +
+ arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi     |   8 +-
+ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     | 130 ++++++-
+ .../dts/freescale/imx8mm-beacon-baseboard.dtsi     | 285 ++++++++++++++
+ .../arm64/boot/dts/freescale/imx8mm-beacon-kit.dts |  19 +
+ .../boot/dts/freescale/imx8mm-beacon-som.dtsi      | 410 +++++++++++++++++++++
+ arch/arm64/boot/dts/freescale/imx8mm-evk.dts       |  12 +
+ arch/arm64/boot/dts/freescale/imx8mm.dtsi          |  12 +-
+ arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts  |  12 +
+ arch/arm64/boot/dts/freescale/imx8mn.dtsi          |  12 +-
+ arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h     |  46 +--
+ arch/arm64/boot/dts/freescale/imx8mp.dtsi          |  80 +++-
+ .../boot/dts/freescale/imx8mq-librem5-devkit.dts   |   4 +-
+ arch/arm64/boot/dts/freescale/imx8mq.dtsi          |   8 +-
+ arch/arm64/boot/dts/freescale/imx8qxp-mek.dts      |  93 +++--
+ arch/arm64/boot/dts/freescale/imx8qxp.dtsi         |  18 +-
+ arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi   |   1 +
+ arch/arm64/configs/defconfig                       |   1 +
+ drivers/clk/imx/Kconfig                            |   8 +-
+ drivers/clk/imx/clk-gate2.c                        |  31 +-
+ drivers/clk/imx/clk-imx6ul.c                       |   2 +-
+ drivers/clk/imx/clk-imx7ulp.c                      |   6 +-
+ drivers/clk/imx/clk-pll14xx.c                      |   8 +-
+ drivers/clk/imx/clk-pllv3.c                        |  16 +-
+ drivers/clk/imx/clk-sscg-pll.c                     |  10 -
+ drivers/clk/imx/clk.h                              |  55 ++-
+ drivers/firmware/imx/imx-scu.c                     |  62 +++-
+ drivers/soc/imx/soc-imx8m.c                        |   7 +-
+ include/dt-bindings/clock/imx7ulp-clock.h          |   5 +-
+ include/dt-bindings/clock/imx8mp-clock.h           |  62 ++++
+ 57 files changed, 1676 insertions(+), 163 deletions(-)
+ create mode 100644 arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
+ create mode 100644 arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
+ create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+ create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
+ create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+Merging keystone/next (560b4d4691b0 Merge branch 'for_5.7/keystone-dts' into next)
+$ git merge keystone/next
+Merge made by the 'recursive' strategy.
+ arch/arm/boot/dts/keystone-k2g-evm.dts | 101 +++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/keystone-k2g.dtsi    |  22 +++++++
+ 2 files changed, 123 insertions(+)
+Merging mediatek/for-next (23a161322658 Merge branch 'v5.7-next/soc' into for-next)
+$ git merge mediatek/for-next
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/arm/mediatek.yaml          |   22 +
+ .../bindings/arm/mediatek/mediatek,mmsys.txt       |    7 +-
+ arch/arm/boot/dts/mt7623n-rfb-emmc.dts             |    1 +
+ arch/arm64/boot/dts/mediatek/Makefile              |    3 +
+ .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts  |    4 +
+ arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts       |    4 +
+ arch/arm64/boot/dts/mediatek/mt7622.dtsi           |   11 +
+ .../boot/dts/mediatek/mt8173-elm-hana-rev7.dts     |   27 +
+ arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts   |   14 +
+ arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi  |   70 ++
+ arch/arm64/boot/dts/mediatek/mt8173-elm.dts        |   14 +
+ arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi       | 1173 ++++++++++++++++++++
+ arch/arm64/boot/dts/mediatek/mt8173.dtsi           |   45 +-
+ arch/arm64/boot/dts/mediatek/mt8183.dtsi           |   26 +-
+ drivers/clk/mediatek/Kconfig                       |    7 +
+ drivers/clk/mediatek/Makefile                      |    1 +
+ drivers/clk/mediatek/clk-mt8173-mm.c               |  146 +++
+ drivers/clk/mediatek/clk-mt8173.c                  |  104 --
+ drivers/gpu/drm/mediatek/Kconfig                   |    1 +
+ drivers/gpu/drm/mediatek/mtk_disp_color.c          |    5 +-
+ drivers/gpu/drm/mediatek/mtk_disp_ovl.c            |    5 +-
+ drivers/gpu/drm/mediatek/mtk_disp_rdma.c           |    5 +-
+ drivers/gpu/drm/mediatek/mtk_dpi.c                 |   12 +-
+ drivers/gpu/drm/mediatek/mtk_drm_crtc.c            |   19 +-
+ drivers/gpu/drm/mediatek/mtk_drm_ddp.c             |  259 +----
+ drivers/gpu/drm/mediatek/mtk_drm_ddp.h             |    7 -
+ drivers/gpu/drm/mediatek/mtk_drm_drv.c             |   45 +-
+ drivers/gpu/drm/mediatek/mtk_drm_drv.h             |    2 +-
+ drivers/gpu/drm/mediatek/mtk_dsi.c                 |    8 +-
+ drivers/gpu/drm/mediatek/mtk_hdmi.c                |    4 +-
+ drivers/soc/mediatek/Kconfig                       |    8 +
+ drivers/soc/mediatek/Makefile                      |    1 +
+ drivers/soc/mediatek/mtk-mmsys.c                   |  337 ++++++
+ include/linux/soc/mediatek/mtk-mmsys.h             |   20 +
+ 34 files changed, 1984 insertions(+), 433 deletions(-)
+ create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
+ create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
+ create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+ create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts
+ create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+ create mode 100644 drivers/clk/mediatek/clk-mt8173-mm.c
+ create mode 100644 drivers/soc/mediatek/mtk-mmsys.c
+ create mode 100644 include/linux/soc/mediatek/mtk-mmsys.h
+Merging mvebu/for-next (9d32706f8aa8 Merge branch 'mvebu/dt64' into mvebu/for-next)
+$ git merge mvebu/for-next
+Merge made by the 'recursive' strategy.
+ arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts   | 2 +-
+ arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts | 4 ++--
+ arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts            | 4 ++--
+ 3 files changed, 5 insertions(+), 5 deletions(-)
+Merging omap/for-next (1f4c797b748c Merge branch 'omap-for-v5.8/dt' into for-next)
+$ git merge omap/for-next
+Auto-merging arch/arm/boot/dts/Makefile
+Merge made by the 'recursive' strategy.
+ arch/arm/boot/dts/Makefile                |   1 +
+ arch/arm/boot/dts/am5729-beagleboneai.dts | 731 ++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/am57xx-idk-common.dtsi  |  58 +++
+ arch/arm/mach-omap2/sleep34xx.S           |   2 +-
+ 4 files changed, 791 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/am5729-beagleboneai.dts
+Merging qcom/for-next (2346b073fc16 Merge branches 'arm64-defconfig-for-5.8', 'arm64-for-5.8', 'drivers-for-5.8' and 'dts-for-5.8' into for-next)
+$ git merge qcom/for-next
+Auto-merging arch/arm64/configs/defconfig
+Merge made by the 'recursive' strategy.
+ Documentation/devicetree/bindings/arm/cpus.yaml    |   1 +
+ Documentation/devicetree/bindings/arm/qcom.yaml    |   7 +
+ .../devicetree/bindings/power/qcom,rpmpd.yaml      |   1 +
+ .../devicetree/bindings/soc/qcom/qcom,apr.txt      |  20 +-
+ arch/arm/boot/dts/qcom-ipq4019.dtsi                |   1 +
+ arch/arm/boot/dts/qcom-ipq8064.dtsi                |   6 +
+ arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts    | 405 +++++++++++-
+ arch/arm/boot/dts/qcom-msm8974.dtsi                |  11 +
+ arch/arm64/boot/dts/qcom/Makefile                  |   1 +
+ arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi          |  76 +++
+ arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi       |  23 +-
+ arch/arm64/boot/dts/qcom/ipq8074-hk01.dts          | 112 ++--
+ arch/arm64/boot/dts/qcom/ipq8074.dtsi              | 474 +++++++-------
+ arch/arm64/boot/dts/qcom/msm8916.dtsi              | 133 +++-
+ arch/arm64/boot/dts/qcom/msm8996.dtsi              |  30 +-
+ arch/arm64/boot/dts/qcom/msm8998.dtsi              |  38 +-
+ arch/arm64/boot/dts/qcom/pm8150.dtsi               |  14 +-
+ arch/arm64/boot/dts/qcom/pm8150b.dtsi              |  14 +-
+ arch/arm64/boot/dts/qcom/pm8150l.dtsi              |  14 +-
+ arch/arm64/boot/dts/qcom/qcs404-evb.dtsi           |  85 ++-
+ arch/arm64/boot/dts/qcom/qcs404.dtsi               | 100 +++
+ arch/arm64/boot/dts/qcom/sc7180-idp.dts            |   6 +-
+ arch/arm64/boot/dts/qcom/sc7180.dtsi               | 705 ++++++++++++++++++---
+ .../arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts |  46 ++
+ arch/arm64/boot/dts/qcom/sdm660.dtsi               | 372 +++++++++++
+ arch/arm64/boot/dts/qcom/sdm845-db845c.dts         | 213 ++++++-
+ arch/arm64/boot/dts/qcom/sdm845.dtsi               |  96 ++-
+ .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts      |   2 -
+ arch/arm64/boot/dts/qcom/sm8250-mtp.dts            | 351 ++++++++++
+ arch/arm64/boot/dts/qcom/sm8250.dtsi               | 126 +++-
+ arch/arm64/configs/defconfig                       |   3 +
+ drivers/firmware/qcom_scm.c                        |  11 +-
+ drivers/soc/qcom/Kconfig                           |   8 +-
+ drivers/soc/qcom/cmd-db.c                          |  78 ++-
+ drivers/soc/qcom/pdr_interface.c                   |   4 -
+ drivers/soc/qcom/rpmh-internal.h                   |  65 +-
+ drivers/soc/qcom/rpmh-rsc.c                        | 659 ++++++++++++++-----
+ drivers/soc/qcom/rpmh.c                            |  76 +--
+ drivers/soc/qcom/rpmhpd.c                          |  24 +
+ drivers/soc/qcom/rpmpd.c                           |   5 +
+ drivers/soc/qcom/smp2p.c                           |   4 +-
+ drivers/soc/qcom/socinfo.c                         |   2 +
+ include/dt-bindings/power/qcom-rpmpd.h             |  12 +
+ include/soc/qcom/cmd-db.h                          |   1 +
+ 44 files changed, 3701 insertions(+), 734 deletions(-)
+ create mode 100644 arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+ create mode 100644 arch/arm64/boot/dts/qcom/sdm660.dtsi
+$ git am -3 ../patches/0001-Revert-soc-qcom-rpmh-Allow-RPMH-driver-to-be-loaded-.patch
+Applying: Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module"
+$ git reset HEAD^
+Unstaged changes after reset:
+M	drivers/soc/qcom/Kconfig
+M	drivers/soc/qcom/rpmh-rsc.c
+$ git add -A .
+$ git commit -v -a --amend
+[master aea0ced93286] Merge remote-tracking branch 'qcom/for-next'
+ Date: Thu Apr 30 10:09:50 2020 +1000
+Merging raspberrypi/for-next (f5e216e42689 ARM: dts: bcm283x: Use firmware PM driver for V3D)
+$ git merge raspberrypi/for-next
+Merge made by the 'recursive' strategy.
+ arch/arm/boot/dts/bcm2711-rpi-4-b.dts     | 13 ++++++++++++-
+ arch/arm/boot/dts/bcm2835-common.dtsi     |  1 -
+ arch/arm/boot/dts/bcm2835-rpi-common.dtsi | 12 ++++++++++++
+ arch/arm/boot/dts/bcm2835.dtsi            |  1 +
+ arch/arm/boot/dts/bcm2836.dtsi            |  1 +
+ arch/arm/boot/dts/bcm2837.dtsi            |  1 +
+ arch/arm/configs/bcm2835_defconfig        |  1 +
+ 7 files changed, 28 insertions(+), 2 deletions(-)
+ create mode 100644 arch/arm/boot/dts/bcm2835-rpi-common.dtsi
+Merging realtek/for-next (486f29df6941 Merge branch 'v5.8/dt' into next)
+$ git merge realtek/for-next
+Auto-merging arch/arm/boot/dts/Makefile
+Auto-merging MAINTAINERS
+Merge made by the 'recursive' strategy.
+ Documentation/devicetree/bindings/arm/realtek.yaml |  21 ++
+ .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
+ MAINTAINERS                                        |   2 +
+ arch/arm/Kconfig                                   |   2 +
+ arch/arm/Makefile                                  |   3 +
+ arch/arm/boot/dts/Makefile                         |   3 +
+ arch/arm/boot/dts/rtd1195-horseradish.dts          |  32 +++
+ arch/arm/boot/dts/rtd1195-mele-x1000.dts           |  32 +++
+ arch/arm/boot/dts/rtd1195.dtsi                     | 217 +++++++++++++++++++
+ arch/arm/mach-realtek/Kconfig                      |  11 +
+ arch/arm/mach-realtek/Makefile                     |   2 +
+ arch/arm/mach-realtek/rtd1195.c                    |  40 ++++
+ arch/arm64/boot/dts/realtek/Makefile               |   6 +
+ arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts     |   6 +-
+ arch/arm64/boot/dts/realtek/rtd1293.dtsi           |  12 +-
+ arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts    |   6 +-
+ .../arm64/boot/dts/realtek/rtd1295-probox2-ava.dts |   6 +-
+ arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts   |  30 +++
+ arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts  |   4 +-
+ arch/arm64/boot/dts/realtek/rtd1295.dtsi           |  21 +-
+ arch/arm64/boot/dts/realtek/rtd1296-ds418.dts      |   4 +-
+ arch/arm64/boot/dts/realtek/rtd1296.dtsi           |   8 +-
+ arch/arm64/boot/dts/realtek/rtd129x.dtsi           | 221 +++++++++++++-------
+ arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts     |  30 +++
+ arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts   |  36 ++++
+ arch/arm64/boot/dts/realtek/rtd1395.dtsi           |  65 ++++++
+ arch/arm64/boot/dts/realtek/rtd139x.dtsi           | 193 +++++++++++++++++
+ arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts    |  44 ++++
+ arch/arm64/boot/dts/realtek/rtd1619.dtsi           |  12 ++
+ arch/arm64/boot/dts/realtek/rtd16xx.dtsi           | 229 +++++++++++++++++++++
+ include/dt-bindings/reset/realtek,rtd1195.h        |  74 +++++++
+ include/dt-bindings/reset/realtek,rtd1295.h        |   3 +
+ 32 files changed, 1268 insertions(+), 109 deletions(-)
+ create mode 100644 arch/arm/boot/dts/rtd1195-horseradish.dts
+ create mode 100644 arch/arm/boot/dts/rtd1195-mele-x1000.dts
+ create mode 100644 arch/arm/boot/dts/rtd1195.dtsi
+ create mode 100644 arch/arm/mach-realtek/Kconfig
+ create mode 100644 arch/arm/mach-realtek/Makefile
+ create mode 100644 arch/arm/mach-realtek/rtd1195.c
+ create mode 100644 arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts
+ create mode 100644 arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
+ create mode 100644 arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts
+ create mode 100644 arch/arm64/boot/dts/realtek/rtd1395.dtsi
+ create mode 100644 arch/arm64/boot/dts/realtek/rtd139x.dtsi
+ create mode 100644 arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
+ create mode 100644 arch/arm64/boot/dts/realtek/rtd1619.dtsi
+ create mode 100644 arch/arm64/boot/dts/realtek/rtd16xx.dtsi
+ create mode 100644 include/dt-bindings/reset/realtek,rtd1195.h
+Merging renesas/next (00f21412f244 Merge branches 'renesas-arm-soc-for-v5.8', 'renesas-drivers-for-v5.8' and 'renesas-dt-bindings-for-v5.8' into renesas-next)
+$ git merge renesas/next
+Merge made by the 'recursive' strategy.
+ .../bindings/power/renesas,rcar-sysc.yaml          |   1 +
+ .../devicetree/bindings/reset/renesas,rst.yaml     |   1 +
+ arch/arm/boot/dts/r7s9210.dtsi                     |   3 -
+ arch/arm/boot/dts/r8a73a4.dtsi                     |   9 +-
+ arch/arm/boot/dts/r8a7740.dtsi                     |   2 +-
+ arch/arm/boot/dts/r8a7743.dtsi                     |  12 +-
+ arch/arm/boot/dts/r8a7744.dtsi                     |  12 +-
+ arch/arm/boot/dts/r8a7745.dtsi                     |  12 +-
+ arch/arm/boot/dts/r8a7790.dtsi                     |  12 +-
+ arch/arm/boot/dts/r8a7791.dtsi                     |  95 ++++-
+ arch/arm/boot/dts/r8a7793.dtsi                     |  14 +-
+ arch/arm/boot/dts/r8a7794.dtsi                     |  12 +-
+ arch/arm/boot/dts/sh73a0.dtsi                      |   2 +-
+ arch/arm/configs/shmobile_defconfig                |   1 +
+ arch/arm/mach-shmobile/setup-rcar-gen2.c           |   2 +
+ arch/arm64/boot/dts/renesas/r8a774a1.dtsi          |  18 +-
+ arch/arm64/boot/dts/renesas/r8a774b1.dtsi          |  18 +-
+ arch/arm64/boot/dts/renesas/r8a774c0.dtsi          |  18 +-
+ arch/arm64/boot/dts/renesas/r8a77950.dtsi          |  14 +-
+ arch/arm64/boot/dts/renesas/r8a77951.dtsi          |  34 +-
+ arch/arm64/boot/dts/renesas/r8a77960.dtsi          |  22 +-
+ arch/arm64/boot/dts/renesas/r8a77961.dtsi          | 403 ++++++++++++++++++++-
+ arch/arm64/boot/dts/renesas/r8a77965.dtsi          |  20 +-
+ arch/arm64/boot/dts/renesas/r8a77970.dtsi          |  10 +-
+ arch/arm64/boot/dts/renesas/r8a77980.dtsi          |  18 +-
+ arch/arm64/boot/dts/renesas/r8a77990.dtsi          |  20 +-
+ arch/arm64/boot/dts/renesas/r8a77995.dtsi          |  20 +-
+ drivers/soc/renesas/Kconfig                        |   4 +
+ drivers/soc/renesas/Makefile                       |   1 +
+ drivers/soc/renesas/r8a7742-sysc.c                 |  42 +++
+ drivers/soc/renesas/rcar-rst.c                     |   1 +
+ drivers/soc/renesas/rcar-sysc.c                    |   3 +
+ drivers/soc/renesas/rcar-sysc.h                    |   1 +
+ include/dt-bindings/clock/r8a7742-cpg-mssr.h       |  42 +++
+ include/dt-bindings/power/r8a7742-sysc.h           |  29 ++
+ 35 files changed, 758 insertions(+), 170 deletions(-)
+ create mode 100644 drivers/soc/renesas/r8a7742-sysc.c
+ create mode 100644 include/dt-bindings/clock/r8a7742-cpg-mssr.h
+ create mode 100644 include/dt-bindings/power/r8a7742-sysc.h
+Merging reset/reset/next (2ebf89fd4ecf reset: hi6220: Add support for AO reset controller)
+$ git merge reset/reset/next
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/reset/fsl,imx7-src.txt     |   6 +-
+ drivers/reset/hisilicon/hi6220_reset.c             |  69 +++++++++++++-
+ drivers/reset/reset-imx7.c                         | 101 +++++++++++++++++++++
+ .../dt-bindings/reset/amlogic,meson-gxbb-reset.h   |   2 +-
+ include/dt-bindings/reset/imx8mp-reset.h           |  50 ++++++++++
+ include/dt-bindings/reset/imx8mq-reset.h           |  56 ++++++------
+ 6 files changed, 253 insertions(+), 31 deletions(-)
+ create mode 100644 include/dt-bindings/reset/imx8mp-reset.h
+Merging rockchip/for-next (68c391e9f66b Merge branch 'v5.7-clk/fixes' into for-next)
+$ git merge rockchip/for-next
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/arm/rockchip.yaml          |   5 +
+ arch/arm/boot/dts/rk3036.dtsi                      |   2 +-
+ arch/arm/boot/dts/rk3228-evb.dts                   |   2 +-
+ arch/arm/boot/dts/rk3229-xms6.dts                  |   2 +-
+ arch/arm/boot/dts/rk322x.dtsi                      |   6 +-
+ arch/arm/boot/dts/rk3xxx.dtsi                      |   2 +-
+ arch/arm/mach-rockchip/platsmp.c                   |   2 +-
+ arch/arm/mach-rockchip/rockchip.c                  |   2 +-
+ arch/arm64/boot/dts/rockchip/Makefile              |   1 +
+ arch/arm64/boot/dts/rockchip/px30.dtsi             |   2 +-
+ arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts     |   2 -
+ arch/arm64/boot/dts/rockchip/rk3308.dtsi           |   2 +-
+ arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 560 +++++++++++++++++++++
+ arch/arm64/boot/dts/rockchip/rk3326.dtsi           |  15 +
+ arch/arm64/boot/dts/rockchip/rk3328-evb.dts        |   5 +-
+ arch/arm64/boot/dts/rockchip/rk3328-rock64.dts     |   2 +-
+ arch/arm64/boot/dts/rockchip/rk3328.dtsi           |  18 -
+ arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts |   1 -
+ .../boot/dts/rockchip/rk3399-pinebook-pro.dts      |  10 +-
+ arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi |  27 +
+ arch/arm64/boot/dts/rockchip/rk3399.dtsi           |  14 +-
+ drivers/clk/rockchip/clk-pll.c                     |  70 +--
+ drivers/clk/rockchip/clk-rk3228.c                  |  17 +-
+ 23 files changed, 678 insertions(+), 91 deletions(-)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3326.dtsi
+Merging samsung-krzk/for-next (fcd1f4184e18 Merge branch 'next/soc' into for-next)
+$ git merge samsung-krzk/for-next
+Auto-merging arch/arm/boot/dts/Makefile
+Merge made by the 'recursive' strategy.
+ .../bindings/arm/samsung/samsung-boards.yaml       |   1 +
+ arch/arm/boot/dts/Makefile                         |   1 +
+ arch/arm/boot/dts/exynos3250-monk.dts              |   3 +-
+ arch/arm/boot/dts/exynos3250-rinato.dts            |  48 +-
+ arch/arm/boot/dts/exynos4210-i9100.dts             | 768 +++++++++++++++++++++
+ arch/arm/boot/dts/exynos4210-origen.dts            |   7 +-
+ arch/arm/boot/dts/exynos4210-trats.dts             |  41 +-
+ arch/arm/boot/dts/exynos4210-universal_c210.dts    |  33 +-
+ arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi        |   6 +-
+ arch/arm/boot/dts/exynos4412-midas.dtsi            |  17 +-
+ arch/arm/boot/dts/exynos4412-odroid-common.dtsi    |   8 +-
+ arch/arm/boot/dts/exynos4412-origen.dts            |  14 +-
+ arch/arm/boot/dts/exynos5250-arndale.dts           |  13 +-
+ arch/arm/boot/dts/exynos5420-arndale-octa.dts      |   2 +-
+ arch/arm/configs/exynos_defconfig                  |   8 +-
+ arch/arm/mach-s3c64xx/mach-crag6410-module.c       |   7 +-
+ arch/arm/plat-samsung/adc.c                        |   8 +-
+ 17 files changed, 923 insertions(+), 62 deletions(-)
+ create mode 100644 arch/arm/boot/dts/exynos4210-i9100.dts
+Merging scmi/for-linux-next (a8e5f6d8ecfe Merge branch 'for-next/scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into for-linux-next)
+$ git merge scmi/for-linux-next
+Merge made by the 'recursive' strategy.
+ Documentation/devicetree/bindings/arm/arm,scmi.txt |   3 +-
+ drivers/firmware/arm_scmi/Makefile                 |   4 +-
+ drivers/firmware/arm_scmi/base.c                   |   7 +
+ drivers/firmware/arm_scmi/common.h                 |  11 ++
+ drivers/firmware/arm_scmi/driver.c                 | 133 ++++++++++++++----
+ drivers/firmware/arm_scmi/mailbox.c                |  17 +++
+ drivers/firmware/arm_scmi/perf.c                   |   5 +
+ drivers/firmware/arm_scmi/power.c                  |   6 +
+ drivers/firmware/arm_scmi/sensors.c                |   4 +
+ drivers/firmware/arm_scmi/shmem.c                  |  15 ++
+ drivers/firmware/arm_scmi/smc.c                    | 153 +++++++++++++++++++++
+ include/linux/scmi_protocol.h                      |   6 +
+ include/linux/scpi_protocol.h                      |   6 +
+ 13 files changed, 340 insertions(+), 30 deletions(-)
+ create mode 100644 drivers/firmware/arm_scmi/smc.c
+Merging sunxi/sunxi/for-next (8c42b100c050 Merge branches 'sunxi/clk-for-5.8', 'sunxi/config-for-5.8' and 'sunxi/dt-for-5.8' into sunxi/for-next)
+$ git merge sunxi/sunxi/for-next
+Auto-merging arch/arm64/configs/defconfig
+Auto-merging arch/arm/boot/dts/Makefile
+Merge made by the 'recursive' strategy.
+ Documentation/devicetree/bindings/arm/sunxi.yaml   |   5 +
+ arch/arm/boot/dts/Makefile                         |   1 +
+ .../arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts |  32 ++++++
+ arch/arm/boot/dts/sun8i-a83t.dtsi                  |  10 ++
+ .../boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts    |   2 +-
+ arch/arm/boot/dts/sun8i-h3.dtsi                    |  24 ++++-
+ arch/arm/boot/dts/sunxi-h3-h5.dtsi                 |  10 ++
+ arch/arm/configs/sunxi_defconfig                   |   1 +
+ .../boot/dts/allwinner/sun50i-a64-olinuxino.dts    |   9 ++
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi      |  12 +++
+ .../boot/dts/allwinner/sun50i-h6-beelink-gs1.dts   |   9 +-
+ .../boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi      | 117 +++++++++++++++++++++
+ .../boot/dts/allwinner/sun50i-h6-orangepi-3.dts    |   3 +
+ .../dts/allwinner/sun50i-h6-orangepi-lite2.dts     |  65 ++++++++++++
+ .../boot/dts/allwinner/sun50i-h6-orangepi.dtsi     |  17 ++-
+ .../boot/dts/allwinner/sun50i-h6-pine-h64.dts      |  43 ++++----
+ .../boot/dts/allwinner/sun50i-h6-tanix-tx6.dts     |  13 +++
+ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi       |  50 +++++++++
+ arch/arm64/configs/defconfig                       |   1 +
+ drivers/clk/sunxi/clk-sunxi.c                      |   2 +-
+ 20 files changed, 401 insertions(+), 25 deletions(-)
+ create mode 100644 arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
+ create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
+Merging tegra/for-next (a39e211f743e Merge branch for-5.8/arm64/dt into for-next)
+$ git merge tegra/for-next
+Auto-merging arch/arm64/configs/defconfig
+Merge made by the 'recursive' strategy.
+ .../memory-controllers/nvidia,tegra210-emc.yaml    |   82 +
+ arch/arm/boot/dts/tegra114-dalmore.dts             |    3 +-
+ arch/arm/boot/dts/tegra124-venice2.dts             |    2 +-
+ arch/arm/boot/dts/tegra20-colibri-eval-v3.dts      |    2 +-
+ arch/arm/boot/dts/tegra20-colibri-iris.dts         |    2 +-
+ arch/arm/boot/dts/tegra20-harmony.dts              |    2 +-
+ arch/arm/boot/dts/tegra20-medcom-wide.dts          |    2 +-
+ arch/arm/boot/dts/tegra20-paz00.dts                |    2 +-
+ arch/arm/boot/dts/tegra20-seaboard.dts             |    2 +-
+ arch/arm/boot/dts/tegra20-ventana.dts              |    2 +-
+ arch/arm/boot/dts/tegra30-apalis-eval.dts          |    2 +-
+ arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts     |    2 +-
+ arch/arm/boot/dts/tegra30-cardhu.dtsi              |    2 +-
+ arch/arm/boot/dts/tegra30-colibri-eval-v3.dts      |    2 +-
+ arch/arm64/boot/dts/nvidia/tegra132-norrin.dts     |    2 +-
+ arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi     |    7 +-
+ arch/arm64/boot/dts/nvidia/tegra194.dtsi           |   18 +
+ arch/arm64/boot/dts/nvidia/tegra210.dtsi           |   37 +-
+ arch/arm64/configs/defconfig                       |    2 +-
+ drivers/clk/tegra/Kconfig                          |    4 -
+ drivers/clk/tegra/Makefile                         |    3 +-
+ .../clk/tegra/{clk-emc.c => clk-tegra124-emc.c}    |    0
+ drivers/clk/tegra/clk-tegra210-emc.c               |  369 ++++
+ drivers/clk/tegra/clk-tegra210.c                   |   87 +-
+ drivers/clk/tegra/clk.h                            |    5 +-
+ drivers/firmware/tegra/bpmp.c                      |    9 +-
+ drivers/memory/tegra/Kconfig                       |   14 +
+ drivers/memory/tegra/Makefile                      |    4 +
+ drivers/memory/tegra/mc.h                          |    1 +
+ drivers/memory/tegra/tegra124-emc.c                |    6 +-
+ drivers/memory/tegra/tegra20-emc.c                 |    6 +-
+ drivers/memory/tegra/tegra210-emc-cc-r21021.c      | 1775 +++++++++++++++++
+ drivers/memory/tegra/tegra210-emc-core.c           | 2101 ++++++++++++++++++++
+ drivers/memory/tegra/tegra210-emc-table.c          |   90 +
+ drivers/memory/tegra/tegra210-emc.h                | 1017 ++++++++++
+ drivers/memory/tegra/tegra210-mc.h                 |   50 +
+ drivers/memory/tegra/tegra30-emc.c                 |    6 +-
+ drivers/of/of_reserved_mem.c                       |   41 +-
+ drivers/soc/tegra/fuse/fuse-tegra.c                |   57 +-
+ drivers/soc/tegra/fuse/fuse-tegra20.c              |    1 +
+ drivers/soc/tegra/fuse/fuse-tegra30.c              |    6 +
+ drivers/soc/tegra/fuse/fuse.h                      |    8 +
+ drivers/soc/tegra/fuse/tegra-apbmisc.c             |   32 +-
+ drivers/soc/tegra/pmc.c                            |    1 +
+ include/dt-bindings/clock/tegra114-car.h           |   14 +-
+ include/dt-bindings/clock/tegra124-car-common.h    |   14 +-
+ include/dt-bindings/clock/tegra20-car.h            |    2 +-
+ include/dt-bindings/clock/tegra210-car.h           |   18 +-
+ include/dt-bindings/clock/tegra30-car.h            |   14 +-
+ include/linux/clk/tegra.h                          |   27 +
+ include/linux/of_reserved_mem.h                    |   11 +
+ 51 files changed, 5850 insertions(+), 118 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
+ rename drivers/clk/tegra/{clk-emc.c => clk-tegra124-emc.c} (100%)
+ create mode 100644 drivers/clk/tegra/clk-tegra210-emc.c
+ create mode 100644 drivers/memory/tegra/tegra210-emc-cc-r21021.c
+ create mode 100644 drivers/memory/tegra/tegra210-emc-core.c
+ create mode 100644 drivers/memory/tegra/tegra210-emc-table.c
+ create mode 100644 drivers/memory/tegra/tegra210-emc.h
+ create mode 100644 drivers/memory/tegra/tegra210-mc.h
+Merging clk/clk-next (e7f552f727f5 Merge branch 'clk-fixes' into clk-next)
+$ git merge clk/clk-next
+Already up to date!
+Merge made by the 'recursive' strategy.
+Merging clk-samsung/for-next (54ecb8f7028c Linux 5.4-rc1)
+$ git merge clk-samsung/for-next
+Already up to date.
+Merging c6x/for-linux-next (8adcc59974b8 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs)
+$ git merge c6x/for-linux-next
+Already up to date.
+Merging csky/linux-next (10cb08260605 csky: Fixup perf probe -x hungup)
+$ git merge csky/linux-next
+Merge made by the 'recursive' strategy.
+ arch/csky/abiv2/mcount.S            | 2 ++
+ arch/csky/include/asm/thread_info.h | 8 ++++----
+ arch/csky/kernel/ftrace.c           | 2 ++
+ arch/csky/kernel/probes/uprobes.c   | 5 +++++
+ arch/csky/kernel/ptrace.c           | 6 ++++++
+ 5 files changed, 19 insertions(+), 4 deletions(-)
+Merging h8300/h8300-next (beab3d5cb0e1 irq-renesas-h8s: Fix external interrupt control.)
+$ git merge h8300/h8300-next
+Auto-merging drivers/tty/serial/sh-sci.c
+Merge made by the 'recursive' strategy.
+ arch/h8300/Kconfig.cpu                  |  4 ++
+ arch/h8300/boot/dts/edosk2674.dts       | 10 ++++-
+ arch/h8300/configs/edosk2674_defconfig  | 10 ++---
+ arch/h8300/configs/h8300h-sim_defconfig |  8 +---
+ arch/h8300/configs/h8s-sim_defconfig    |  8 +---
+ arch/h8300/lib/memset.S                 | 17 +++++----
+ drivers/clocksource/h8300_timer8.c      | 20 +++++-----
+ drivers/irqchip/irq-renesas-h8300h.c    | 19 +++++++++-
+ drivers/irqchip/irq-renesas-h8s.c       | 67 +++++++++++++++++++++++++--------
+ drivers/net/ethernet/smsc/Kconfig       |  1 -
+ drivers/net/ethernet/smsc/smc91x.c      | 10 +++++
+ drivers/tty/serial/sh-sci.c             |  5 +--
+ 12 files changed, 120 insertions(+), 59 deletions(-)
+Merging ia64/next (172e7890406d tty/serial: cleanup after ioc*_serial driver removal)
+$ git merge ia64/next
+Already up to date.
+Merging m68k/for-next (366b8149fbff m68k: amiga: config: Replace zero-length array with flexible-array member)
+$ git merge m68k/for-next
+Auto-merging arch/m68k/amiga/config.c
+Merge made by the 'recursive' strategy.
+ arch/m68k/amiga/config.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+Merging m68knommu/for-next (012d1de88776 m68k/PCI: Fix a memory leak in an error handling path)
+$ git merge m68knommu/for-next
+Merge made by the 'recursive' strategy.
+ arch/m68k/coldfire/pci.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+Merging microblaze/next (8f3d9f354286 Linux 5.7-rc1)
+$ git merge microblaze/next
+Already up to date.
+Merging mips/mips-next (f932449c11da MIPS: ingenic: Drop obsolete code, merge the rest in setup.c)
+$ git merge mips/mips-next
+Removing arch/mips/loongson64/rtc.c
+Removing arch/mips/jz4740/timer.c
+Removing arch/mips/jz4740/time.c
+Removing arch/mips/jz4740/reset.h
+Removing arch/mips/jz4740/reset.c
+Removing arch/mips/jz4740/prom.c
+Removing arch/mips/jz4740/pm.c
+Removing arch/mips/include/asm/mach-xilfpga/irq.h
+Removing arch/mips/include/asm/mach-loongson64/mc146818rtc.h
+Removing arch/mips/include/asm/mach-jz4740/timer.h
+Removing arch/mips/include/asm/mach-jz4740/dma.h
+Removing arch/mips/include/asm/mach-jz4740/base.h
+Removing arch/mips/include/asm/mach-au1x00/ioremap.h
+Removing arch/mips/include/asm/clock.h
+Merge made by the 'recursive' strategy.
+ .../bindings/mips/loongson/rs780e-acpi.yaml        |  40 ++
+ arch/mips/Kconfig                                  |   6 +-
+ arch/mips/alchemy/common/setup.c                   |  17 +-
+ arch/mips/boot/dts/ingenic/ci20.dts                |   3 +
+ arch/mips/boot/dts/ingenic/gcw0.dts                | 499 ++++++++++++-
+ arch/mips/boot/dts/ingenic/jz4740.dtsi             |  33 +-
+ arch/mips/boot/dts/ingenic/jz4770.dtsi             | 227 +++++-
+ arch/mips/boot/dts/ingenic/jz4780.dtsi             |  65 +-
+ arch/mips/boot/dts/ingenic/x1000.dtsi              |   9 +-
+ arch/mips/boot/dts/loongson/rs780e-pch.dtsi        |   5 +
+ arch/mips/configs/ci20_defconfig                   |  62 +-
+ arch/mips/configs/gcw0_defconfig                   | 131 +++-
+ arch/mips/configs/loongson3_defconfig              |   1 +
+ arch/mips/include/asm/asm-eva.h                    |   2 +-
+ arch/mips/include/asm/asm.h                        |   4 +
+ arch/mips/include/asm/bootinfo.h                   |   2 +-
+ arch/mips/include/asm/branch.h                     |   3 +
+ arch/mips/include/asm/cacheops.h                   |   2 +-
+ arch/mips/include/asm/clock.h                      |  49 --
+ arch/mips/include/asm/cpu-features.h               |   6 -
+ arch/mips/include/asm/cpu.h                        |   4 +
+ arch/mips/include/asm/fpu_emulator.h               |   4 -
+ arch/mips/include/asm/inst.h                       | 773 ++++++++++++++++++++
+ arch/mips/include/asm/io.h                         |  87 +--
+ .../include/asm/mach-ath25/cpu-feature-overrides.h |   1 -
+ .../include/asm/mach-ath79/cpu-feature-overrides.h |   1 -
+ arch/mips/include/asm/mach-au1x00/ioremap.h        |  38 -
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h       |   5 -
+ arch/mips/include/asm/mach-bmips/ioremap.h         |   5 -
+ arch/mips/include/asm/mach-generic/ioremap.h       |   9 -
+ arch/mips/include/asm/mach-generic/irq.h           |   6 -
+ arch/mips/include/asm/mach-jz4740/base.h           |  27 -
+ arch/mips/include/asm/mach-jz4740/dma.h            |  23 -
+ arch/mips/include/asm/mach-jz4740/irq.h            |  45 +-
+ arch/mips/include/asm/mach-jz4740/timer.h          | 126 ----
+ .../asm/mach-lantiq/falcon/cpu-feature-overrides.h |   1 -
+ arch/mips/include/asm/mach-loongson2ef/loongson.h  |   1 +
+ arch/mips/include/asm/mach-loongson64/boot_param.h |   6 +
+ .../mips/include/asm/mach-loongson64/mc146818rtc.h |  36 -
+ .../asm/mach-ralink/mt7620/cpu-feature-overrides.h |   1 -
+ arch/mips/include/asm/mach-ralink/mt7621.h         |   2 -
+ .../asm/mach-ralink/mt7621/cpu-feature-overrides.h |   1 -
+ .../asm/mach-ralink/rt288x/cpu-feature-overrides.h |   1 -
+ .../asm/mach-ralink/rt305x/cpu-feature-overrides.h |   1 -
+ .../asm/mach-ralink/rt3883/cpu-feature-overrides.h |   1 -
+ .../asm/mach-rc32434/cpu-feature-overrides.h       |   1 -
+ arch/mips/include/asm/mach-tx39xx/ioremap.h        |   9 -
+ arch/mips/include/asm/mach-tx49xx/ioremap.h        |   9 -
+ arch/mips/include/asm/mach-xilfpga/irq.h           |  14 -
+ arch/mips/include/asm/pgtable-64.h                 |   4 +-
+ arch/mips/include/asm/pgtable.h                    |  23 +-
+ arch/mips/include/asm/smp.h                        |   2 +-
+ arch/mips/include/uapi/asm/inst.h                  |  26 +
+ arch/mips/jz4740/Makefile                          |   7 +-
+ arch/mips/jz4740/pm.c                              |  34 -
+ arch/mips/jz4740/prom.c                            |  19 -
+ arch/mips/jz4740/reset.c                           |  24 -
+ arch/mips/jz4740/reset.h                           |   7 -
+ arch/mips/jz4740/setup.c                           |  63 +-
+ arch/mips/jz4740/time.c                            |  17 -
+ arch/mips/jz4740/timer.c                           |  42 --
+ arch/mips/kernel/cpu-probe.c                       |  19 +-
+ arch/mips/kernel/head.S                            |   3 +
+ arch/mips/kernel/idle.c                            |   3 +-
+ arch/mips/kernel/setup.c                           |  14 +-
+ arch/mips/kernel/unaligned.c                       | 775 ---------------------
+ arch/mips/loongson2ef/Kconfig                      |   1 -
+ arch/mips/loongson2ef/lemote-2f/clock.c            |  98 +--
+ arch/mips/loongson64/Kconfig                       |  12 +-
+ arch/mips/loongson64/Makefile                      |   3 +-
+ arch/mips/loongson64/cop2-ex.c                     | 289 +++++++-
+ arch/mips/loongson64/env.c                         |  18 +
+ arch/mips/loongson64/pci.c                         |   2 -
+ arch/mips/loongson64/rtc.c                         |  39 --
+ arch/mips/loongson64/smp.c                         |   1 -
+ arch/mips/loongson64/time.c                        |   8 +-
+ arch/mips/mm/Makefile                              |   2 +-
+ arch/mips/mm/c-r4k.c                               |  14 +-
+ arch/mips/mm/ioremap.c                             | 151 +---
+ arch/mips/mm/ioremap64.c                           |  23 +
+ arch/mips/netlogic/xlr/fmn.c                       |   2 +-
+ arch/mips/oprofile/common.c                        |   2 +-
+ arch/mips/pci/pci-alchemy.c                        |   2 +-
+ arch/mips/pmcs-msp71xx/msp_setup.c                 |   2 +-
+ arch/mips/txx9/Kconfig                             |  14 +-
+ drivers/cpufreq/loongson2_cpufreq.c                |  22 +-
+ drivers/platform/mips/Kconfig                      |   6 +
+ drivers/platform/mips/Makefile                     |   1 +
+ .../platform/mips/rs780e-acpi.c                    |  58 +-
+ sound/soc/txx9/txx9aclc-ac97.c                     |   1 +
+ 90 files changed, 2375 insertions(+), 1882 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
+ delete mode 100644 arch/mips/include/asm/clock.h
+ delete mode 100644 arch/mips/include/asm/mach-au1x00/ioremap.h
+ delete mode 100644 arch/mips/include/asm/mach-jz4740/base.h
+ delete mode 100644 arch/mips/include/asm/mach-jz4740/dma.h
+ delete mode 100644 arch/mips/include/asm/mach-jz4740/timer.h
+ delete mode 100644 arch/mips/include/asm/mach-loongson64/mc146818rtc.h
+ delete mode 100644 arch/mips/include/asm/mach-xilfpga/irq.h
+ delete mode 100644 arch/mips/jz4740/pm.c
+ delete mode 100644 arch/mips/jz4740/prom.c
+ delete mode 100644 arch/mips/jz4740/reset.c
+ delete mode 100644 arch/mips/jz4740/reset.h
+ delete mode 100644 arch/mips/jz4740/time.c
+ delete mode 100644 arch/mips/jz4740/timer.c
+ delete mode 100644 arch/mips/loongson64/rtc.c
+ create mode 100644 arch/mips/mm/ioremap64.c
+ rename arch/mips/loongson64/acpi_init.c => drivers/platform/mips/rs780e-acpi.c (70%)
+Merging nds32/next (d785c5a324cd nds32: configs: Cleanup CONFIG_CROSS_COMPILE)
+$ git merge nds32/next
+Merge made by the 'recursive' strategy.
+ arch/nds32/configs/defconfig | 1 -
+ arch/nds32/kernel/time.c     | 2 +-
+ 2 files changed, 1 insertion(+), 2 deletions(-)
+Merging nios2/for-next (0ec8a5054d7f MAINTAINERS: Remove nios2-dev@lists.rocketboards.org)
+$ git merge nios2/for-next
+Already up to date.
+Merging openrisc/for-next (9737e2c5f0bc openrisc: Remove obsolete show_trace_task function)
+$ git merge openrisc/for-next
+Already up to date.
+Merging parisc-hd/for-next (7111951b8d49 Linux 5.6)
+$ git merge parisc-hd/for-next
+Already up to date.
+Merging powerpc/next (45591da76588 powerpc/vas: Include linux/types.h in uapi/asm/vas-api.h)
+$ git merge powerpc/next
+Merge made by the 'recursive' strategy.
+ Documentation/powerpc/index.rst                    |    1 +
+ Documentation/powerpc/vas-api.rst                  |  292 ++++++
+ Documentation/userspace-api/ioctl/ioctl-number.rst |    1 +
+ arch/powerpc/include/asm/book3s/64/mmu.h           |    3 +
+ arch/powerpc/include/asm/icswx.h                   |   20 +-
+ arch/powerpc/include/asm/mmu_context.h             |   30 +
+ arch/powerpc/include/asm/processor.h               |    1 -
+ arch/powerpc/include/asm/switch_to.h               |    2 -
+ arch/powerpc/include/asm/vas.h                     |   13 +-
+ arch/powerpc/include/asm/xive.h                    |    9 +-
+ arch/powerpc/include/uapi/asm/vas-api.h            |   24 +
+ arch/powerpc/kernel/process.c                      |   24 +-
+ arch/powerpc/platforms/powernv/Makefile            |    2 +-
+ arch/powerpc/platforms/powernv/vas-api.c           |  278 ++++++
+ arch/powerpc/platforms/powernv/vas-debug.c         |    2 +-
+ arch/powerpc/platforms/powernv/vas-fault.c         |  382 ++++++++
+ arch/powerpc/platforms/powernv/vas-window.c        |  238 ++++-
+ arch/powerpc/platforms/powernv/vas.c               |   85 +-
+ arch/powerpc/platforms/powernv/vas.h               |   59 +-
+ arch/powerpc/sysdev/xive/native.c                  |    6 +-
+ drivers/crypto/nx/Makefile                         |    2 +-
+ .../nx/{nx-842-powernv.c => nx-common-powernv.c}   |  204 ++--
+ tools/testing/selftests/powerpc/Makefile           |    1 +
+ .../selftests/powerpc/nx-gzip/99-nx-gzip.rules     |    1 +
+ tools/testing/selftests/powerpc/nx-gzip/Makefile   |    8 +
+ tools/testing/selftests/powerpc/nx-gzip/README     |   45 +
+ .../testing/selftests/powerpc/nx-gzip/gunz_test.c  | 1028 ++++++++++++++++++++
+ .../testing/selftests/powerpc/nx-gzip/gzfht_test.c |  433 +++++++++
+ tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c |  316 ++++++
+ .../selftests/powerpc/nx-gzip/include/copy-paste.h |   56 ++
+ .../selftests/powerpc/nx-gzip/include/crb.h        |  155 +++
+ .../testing/selftests/powerpc/nx-gzip/include/nx.h |   38 +
+ .../selftests/powerpc/nx-gzip/include/nx_dbg.h     |   95 ++
+ .../selftests/powerpc/nx-gzip/include/nxu.h        |  650 +++++++++++++
+ .../selftests/powerpc/nx-gzip/include/vas-api.h    |    1 +
+ .../selftests/powerpc/nx-gzip/nx-gzip-test.sh      |   46 +
+ 36 files changed, 4417 insertions(+), 134 deletions(-)
+ create mode 100644 Documentation/powerpc/vas-api.rst
+ create mode 100644 arch/powerpc/include/uapi/asm/vas-api.h
+ create mode 100644 arch/powerpc/platforms/powernv/vas-api.c
+ create mode 100644 arch/powerpc/platforms/powernv/vas-fault.c
+ rename drivers/crypto/nx/{nx-842-powernv.c => nx-common-powernv.c} (87%)
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/99-nx-gzip.rules
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/Makefile
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/README
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/gunz_test.c
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/include/copy-paste.h
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/include/crb.h
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/include/nx.h
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/include/nx_dbg.h
+ create mode 100644 tools/testing/selftests/powerpc/nx-gzip/include/nxu.h
+ create mode 120000 tools/testing/selftests/powerpc/nx-gzip/include/vas-api.h
+ create mode 100755 tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh
+Merging fsl/next (a76bea0287ce powerpc/kmcent2: add ranges to the pci bridges)
+$ git merge fsl/next
+Already up to date.
+Merging soc-fsl/next (461c3ac0dc46 soc: fsl: qe: fix sparse warnings for ucc_slow.c)
+$ git merge soc-fsl/next
+Already up to date.
+Merging risc-v/for-next (44ab661dd29d riscv: Use text_mutex instead of patch_lock)
+$ git merge risc-v/for-next
+Merge made by the 'recursive' strategy.
+ arch/riscv/Kbuild                       |   1 +
+ arch/riscv/Kconfig                      |   7 +
+ arch/riscv/Kconfig.socs                 |  17 +-
+ arch/riscv/boot/dts/Makefile            |   2 +
+ arch/riscv/boot/dts/kendryte/Makefile   |   4 +-
+ arch/riscv/configs/nommu_k210_defconfig |   7 +-
+ arch/riscv/include/asm/gdb_xml.h        | 117 ++++++++++
+ arch/riscv/include/asm/kdebug.h         |  12 +
+ arch/riscv/include/asm/kgdb.h           | 112 +++++++++
+ arch/riscv/include/asm/parse_asm.h      | 219 ++++++++++++++++++
+ arch/riscv/include/asm/patch.h          |   4 +-
+ arch/riscv/include/asm/soc.h            |  39 ++++
+ arch/riscv/kernel/Makefile              |   1 +
+ arch/riscv/kernel/ftrace.c              |  15 +-
+ arch/riscv/kernel/head.S                |  11 +-
+ arch/riscv/kernel/kgdb.c                | 390 ++++++++++++++++++++++++++++++++
+ arch/riscv/kernel/patch.c               |  46 ++--
+ arch/riscv/kernel/setup.c               |   4 +
+ arch/riscv/kernel/soc.c                 |  27 +++
+ arch/riscv/kernel/traps.c               |   5 +
+ arch/riscv/kernel/vmlinux.lds.S         |   5 +
+ arch/riscv/mm/init.c                    |   9 +
+ drivers/soc/kendryte/k210-sysctl.c      |  12 +
+ kernel/debug/debug_core.c               |  12 +
+ 24 files changed, 1048 insertions(+), 30 deletions(-)
+ create mode 100644 arch/riscv/include/asm/gdb_xml.h
+ create mode 100644 arch/riscv/include/asm/kdebug.h
+ create mode 100644 arch/riscv/include/asm/kgdb.h
+ create mode 100644 arch/riscv/include/asm/parse_asm.h
+ create mode 100644 arch/riscv/kernel/kgdb.c
+Merging sifive/for-next (467e050e9760 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux)
+$ git merge sifive/for-next
+Already up to date.
+Merging s390/features (19d4c761c1d2 s390/qdio: remove always-true condition)
+$ git merge s390/features
+Auto-merging MAINTAINERS
+Auto-merging Documentation/admin-guide/kernel-parameters.txt
+Merge made by the 'recursive' strategy.
+ Documentation/admin-guide/kernel-parameters.txt |   2 +
+ Documentation/s390/index.rst                    |   1 +
+ Documentation/s390/pci.rst                      | 126 ++++++++++++
+ MAINTAINERS                                     |   1 +
+ arch/s390/include/asm/pci.h                     |  41 +++-
+ arch/s390/include/asm/pci_clp.h                 |  12 +-
+ arch/s390/pci/Makefile                          |   3 +-
+ arch/s390/pci/pci.c                             | 204 ++++++++----------
+ arch/s390/pci/pci_bus.c                         | 262 ++++++++++++++++++++++++
+ arch/s390/pci/pci_bus.h                         |  31 +++
+ arch/s390/pci/pci_clp.c                         |   4 +
+ arch/s390/pci/pci_event.c                       |  39 ++--
+ arch/s390/pci/pci_sysfs.c                       |   4 +-
+ drivers/iommu/s390-iommu.c                      |   8 +-
+ drivers/pci/hotplug/s390_pci_hpc.c              |  16 +-
+ drivers/s390/cio/qdio.h                         |  13 +-
+ drivers/s390/cio/qdio_main.c                    | 105 ++++------
+ drivers/s390/cio/qdio_setup.c                   | 100 +++++----
+ drivers/s390/cio/qdio_thinint.c                 |  61 +++---
+ 19 files changed, 730 insertions(+), 303 deletions(-)
+ create mode 100644 Documentation/s390/pci.rst
+ create mode 100644 arch/s390/pci/pci_bus.c
+ create mode 100644 arch/s390/pci/pci_bus.h
+Merging sh/sh-next (a193018e5290 sh: add missing EXPORT_SYMBOL() for __delay)
+$ git merge sh/sh-next
+Merge made by the 'recursive' strategy.
+ arch/sh/include/asm/cache.h  |  2 +-
+ arch/sh/kernel/Makefile      |  2 --
+ arch/sh/kernel/sh_ksyms_32.c | 17 +++++++++++++++++
+ arch/sh/lib/delay.c          |  1 +
+ 4 files changed, 19 insertions(+), 3 deletions(-)
+Merging sparc-next/master (b71acb0e3721 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6)
+$ git merge sparc-next/master
+Already up to date.
+Merging uml/linux-next (2e27d33d22af um: Fix typo in vector driver transport option definition)
+$ git merge uml/linux-next
+Merge made by the 'recursive' strategy.
+ arch/um/drivers/vector_user.h | 2 +-
+ arch/um/include/asm/xor.h     | 2 +-
+ arch/um/kernel/skas/syscall.c | 1 +
+ 3 files changed, 3 insertions(+), 2 deletions(-)
+Merging xtensa/xtensa-for-next (70cbddb97385 arch/xtensa: fix grammar in Kconfig help text)
+$ git merge xtensa/xtensa-for-next
+Already up to date.
+Merging fscrypt/master (861261f2a9cc ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE)
+$ git merge fscrypt/master
+Already up to date.
+Merging afs/afs-next (4fe171bb81b1 afs: Remove set but not used variable 'ret')
+$ git merge afs/afs-next
+Already up to date.
+Merging btrfs/for-next (2a716ced1526 Merge branch 'for-next-current-v5.6-20200423' into for-next-20200423)
+$ git merge btrfs/for-next
+Auto-merging fs/btrfs/relocation.c
+Auto-merging fs/btrfs/block-group.c
+CONFLICT (content): Merge conflict in fs/btrfs/block-group.c
+Auto-merging .clang-format
+Resolved 'fs/btrfs/block-group.c' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+[master 295aaae2c1ae] Merge remote-tracking branch 'btrfs/for-next'
+$ git diff -M --stat --summary HEAD^..
+ .clang-format                   |    1 +
+ Documentation/block/biovecs.rst |    2 +
+ fs/btrfs/backref.c              |  834 ++++++++++++++++++++++++++
+ fs/btrfs/backref.h              |  297 ++++++++++
+ fs/btrfs/block-group.c          |   20 +-
+ fs/btrfs/block-rsv.c            |    3 +
+ fs/btrfs/btrfs_inode.h          |   26 +-
+ fs/btrfs/ctree.c                |   14 +-
+ fs/btrfs/ctree.h                |    6 +-
+ fs/btrfs/extent-tree.c          |    3 +-
+ fs/btrfs/extent_io.c            |   43 +-
+ fs/btrfs/extent_io.h            |    2 -
+ fs/btrfs/file-item.c            |   11 +-
+ fs/btrfs/inode.c                |  664 ++++++---------------
+ fs/btrfs/locking.c              |    1 +
+ fs/btrfs/misc.h                 |   54 ++
+ fs/btrfs/relocation.c           | 1232 ++++++++-------------------------------
+ fs/btrfs/space-info.c           |   81 ++-
+ fs/btrfs/space-info.h           |    1 +
+ fs/btrfs/transaction.c          |   60 +-
+ fs/btrfs/transaction.h          |    3 +-
+ fs/btrfs/tree-checker.c         |    4 -
+ fs/btrfs/tree-log.c             |   51 +-
+ fs/btrfs/volumes.c              |   47 +-
+ include/linux/bio.h             |    8 +
+ 25 files changed, 1875 insertions(+), 1593 deletions(-)
+Merging ceph/master (2a575f138d00 ceph: fix potential bad pointer deref in async dirops cb's)
+$ git merge ceph/master
+Already up to date.
+Merging cifs/for-next (6a8b55ed4056 Linux 5.7-rc3)
+$ git merge cifs/for-next
+Already up to date.
+Merging configfs/for-next (8aebfffacfa3 configfs: fix config_item refcnt leak in configfs_rmdir())
+$ git merge configfs/for-next
+Merge made by the 'recursive' strategy.
+ fs/configfs/dir.c | 1 +
+ 1 file changed, 1 insertion(+)
+Merging ecryptfs/next (8b614cb8f1dc Merge tag '5.6-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6)
+$ git merge ecryptfs/next
+Already up to date.
+Merging erofs/dev (8f3d9f354286 Linux 5.7-rc1)
+$ git merge erofs/dev
+Already up to date.
+Merging exfat/dev (33cdfbe37703 exfat: replace 'time_ms' with 'time_cs')
+$ git merge exfat/dev
+Merge made by the 'recursive' strategy.
+ fs/exfat/Kconfig     |  7 ++++---
+ fs/exfat/balloc.c    |  8 +++-----
+ fs/exfat/dir.c       | 17 ++++++++---------
+ fs/exfat/exfat_fs.h  | 13 +++++++++----
+ fs/exfat/exfat_raw.h |  4 ++--
+ fs/exfat/fatent.c    | 13 +++++--------
+ fs/exfat/file.c      |  2 +-
+ fs/exfat/inode.c     |  4 ++--
+ fs/exfat/misc.c      | 22 +++++++++++-----------
+ fs/exfat/namei.c     | 49 ++++++++++++++++---------------------------------
+ fs/exfat/nls.c       | 33 ++++++++-------------------------
+ fs/exfat/super.c     | 49 ++++++++++++++++++++++---------------------------
+ 12 files changed, 91 insertions(+), 130 deletions(-)
+Merging ext3/for_next (a32f0ecd79b4 Merge fanotify fix from Nathan Chancellor.)
+$ git merge ext3/for_next
+Already up to date!
+Merge made by the 'recursive' strategy.
+Merging ext4/dev (907ea529fc4c ext4: convert BUG_ON's to WARN_ON's in mballoc.c)
+$ git merge ext4/dev
+Already up to date.
+Merging f2fs/dev (435cbab95e39 f2fs: fix quota_sync failure due to f2fs_lock_op)
+$ git merge f2fs/dev
+Merge made by the 'recursive' strategy.
+ Documentation/ABI/testing/sysfs-fs-f2fs | 15 ++++++
+ fs/f2fs/checkpoint.c                    | 10 +++-
+ fs/f2fs/compress.c                      |  8 +--
+ fs/f2fs/data.c                          | 33 ++++++++++++-
+ fs/f2fs/f2fs.h                          | 52 +++++++++++++++----
+ fs/f2fs/file.c                          | 12 ++++-
+ fs/f2fs/gc.c                            |  6 +++
+ fs/f2fs/node.c                          |  8 ++-
+ fs/f2fs/segment.c                       | 20 ++++++--
+ fs/f2fs/super.c                         |  1 +
+ fs/f2fs/sysfs.c                         | 88 +++++++++++++++++++++++++++------
+ include/trace/events/f2fs.h             | 71 ++++++++++++++++++++++++++
+ 12 files changed, 286 insertions(+), 38 deletions(-)
+Merging fsverity/fsverity (98d54f81e36b Linux 5.6-rc4)
+$ git merge fsverity/fsverity
+Already up to date.
+Merging fuse/for-next (75d892588e95 fuse: Update stale comment in queue_interrupt())
+$ git merge fuse/for-next
+Merge made by the 'recursive' strategy.
+ Documentation/filesystems/virtiofs.rst |  14 +++++
+ fs/fuse/dev.c                          |   7 ++-
+ fs/fuse/file.c                         |   1 +
+ fs/fuse/fuse_i.h                       |   1 +
+ fs/fuse/virtio_fs.c                    | 106 ++++++++++++++++++++++-----------
+ 5 files changed, 91 insertions(+), 38 deletions(-)
+Merging jfs/jfs-next (7aba5dcc2346 jfs: Replace zero-length array with flexible-array member)
+$ git merge jfs/jfs-next
+Merge made by the 'recursive' strategy.
+Merging nfs/linux-next (efe57fd58e1c SUNRPC: Remove unreachable error condition)
+$ git merge nfs/linux-next
+Merge made by the 'recursive' strategy.
+ fs/nfs/nfs3acl.c  | 22 +++++++++++++++-------
+ fs/nfs/pnfs.c     | 11 +++++------
+ net/sunrpc/clnt.c |  3 +--
+ 3 files changed, 21 insertions(+), 15 deletions(-)
+Merging nfs-anna/linux-next (55dee1bc0d72 nfs: add minor version to nfs_server_key for fscache)
+$ git merge nfs-anna/linux-next
+Already up to date.
+Merging nfsd/nfsd-next (2653de9f0398 fs: nfsd: fileache.c: Use built-in RCU list checking)
+$ git merge nfsd/nfsd-next
+Auto-merging net/sunrpc/xprtrdma/svc_rdma_rw.c
+Auto-merging net/sunrpc/cache.c
+CONFLICT (content): Merge conflict in net/sunrpc/cache.c
+Auto-merging include/linux/sunrpc/svc.h
+Auto-merging fs/nfsd/nfs4xdr.c
+Auto-merging fs/nfsd/nfs4state.c
+Resolved 'net/sunrpc/cache.c' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+[master 90953128bca8] Merge remote-tracking branch 'nfsd/nfsd-next'
+$ git diff -M --stat --summary HEAD^..
+Merging orangefs/for-next (aa317d3351de orangefs: clarify build steps for test server in orangefs.txt)
+$ git merge orangefs/for-next
+Already up to date.
+Merging overlayfs/overlayfs-next (23f65779dcf8 ovl: whiteout inode sharing)
+$ git merge overlayfs/overlayfs-next
+Auto-merging include/linux/fs.h
+Merge made by the 'recursive' strategy.
+ Documentation/filesystems/overlayfs.rst |  7 ++-
+ fs/overlayfs/copy_up.c                  |  7 +--
+ fs/overlayfs/dir.c                      | 49 ++++++++++++++-----
+ fs/overlayfs/namei.c                    | 11 -----
+ fs/overlayfs/overlayfs.h                |  6 +--
+ fs/overlayfs/ovl_entry.h                |  3 ++
+ fs/overlayfs/readdir.c                  | 18 +++++--
+ fs/overlayfs/super.c                    | 83 ++++++++++++++++++++++++++++++---
+ fs/overlayfs/util.c                     |  3 +-
+ fs/sync.c                               |  3 +-
+ include/linux/fs.h                      |  2 +
+ 11 files changed, 147 insertions(+), 45 deletions(-)
+Merging ubifs/linux-next (3676f32a98cd ubi: ubi-media.h: Replace zero-length array with flexible-array member)
+$ git merge ubifs/linux-next
+Already up to date.
+Merging v9fs/9p-next (c6f141412d24 9p: document short read behaviour with O_NONBLOCK)
+$ git merge v9fs/9p-next
+Already up to date.
+Merging xfs/for-next (f0f7a674d4df xfs: move inode flush to the sync workqueue)
+$ git merge xfs/for-next
+Already up to date.
+Merging zonefs/for-next (0dda2ddb7ded zonefs: select FS_IOMAP)
+$ git merge zonefs/for-next
+Already up to date.
+Merging iomap/iomap-for-next (457df33e035a iomap: Handle memory allocation failure in readahead)
+$ git merge iomap/iomap-for-next
+Already up to date.
+Merging djw-vfs/vfs-for-next (56939e014a6c hibernate: Allow uswsusp to write to swap)
+$ git merge djw-vfs/vfs-for-next
+Already up to date.
+Merging file-locks/locks-next (dbdaf6a3250b locks: reinstate locks_delete_block optimization)
+$ git merge file-locks/locks-next
+Auto-merging fs/cifs/file.c
+Merge made by the 'recursive' strategy.
+Merging vfs/for-next (ffca8b2a77f2 Merge branch 'work.exfat' into for-next)
+$ git merge vfs/for-next
+Auto-merging fs/super.c
+Auto-merging fs/namespace.c
+Auto-merging fs/erofs/zdata.c
+Auto-merging fs/erofs/super.c
+Auto-merging fs/erofs/internal.h
+Merge made by the 'recursive' strategy.
+ fs/erofs/internal.h |  27 +++---
+ fs/erofs/super.c    | 251 +++++++++++++++++++++++-----------------------------
+ fs/erofs/xattr.c    |   4 +-
+ fs/erofs/zdata.c    |   4 +-
+ fs/namespace.c      |   5 +-
+ fs/super.c          |   2 +-
+ 6 files changed, 134 insertions(+), 159 deletions(-)
+Merging printk/for-next (d34f14ae521f Merge branch 'for-5.7-preferred-console' into for-next)
+$ git merge printk/for-next
+Auto-merging kernel/printk/printk.c
+Auto-merging include/linux/console.h
+Merge made by the 'recursive' strategy.
+ include/linux/console.h         |   2 +-
+ kernel/printk/console_cmdline.h |   1 +
+ kernel/printk/printk.c          | 128 +++++++++++++++++++++++++---------------
+ 3 files changed, 83 insertions(+), 48 deletions(-)
+Merging pci/next (cb4b34e11454 Merge branch 'pci/pm')
+$ git merge pci/next
+Auto-merging drivers/pci/pci.c
+Merge made by the 'recursive' strategy.
+ drivers/acpi/pci_root.c            |  9 ++-------
+ drivers/pci/controller/dwc/Kconfig |  3 +--
+ drivers/pci/hotplug/pciehp.h       |  2 --
+ drivers/pci/hotplug/rpaphp_core.c  |  2 +-
+ drivers/pci/p2pdma.c               |  2 ++
+ drivers/pci/pci.c                  |  4 +++-
+ drivers/pci/pcie/Kconfig           |  2 --
+ drivers/pci/pcie/aer.c             | 26 +-------------------------
+ drivers/pci/pcie/edr.c             |  4 ++--
+ include/linux/pci-acpi.h           |  6 ------
+ 10 files changed, 12 insertions(+), 48 deletions(-)
+Merging pstore/for-next/pstore (8f3d9f354286 Linux 5.7-rc1)
+$ git merge pstore/for-next/pstore
+Already up to date.
+Merging hid/for-next (f28638eb72a3 Merge branch 'for-5.7/upstream-fixes' into for-next)
+$ git merge hid/for-next
+Merge made by the 'recursive' strategy.
+ drivers/hid/Kconfig                |  11 +--
+ drivers/hid/hid-alps.c             |   1 +
+ drivers/hid/hid-ids.h              |   7 +-
+ drivers/hid/hid-lg-g15.c           |   4 +
+ drivers/hid/hid-logitech-dj.c      |   4 +-
+ drivers/hid/hid-logitech-hidpp.c   |   2 +-
+ drivers/hid/hid-mcp2221.c          | 169 +++++++++++++++++++++++++++++++++++++
+ drivers/hid/hid-multitouch.c       |   3 +
+ drivers/hid/i2c-hid/i2c-hid-core.c |   2 +
+ drivers/hid/usbhid/hid-core.c      |  37 ++++++--
+ drivers/hid/usbhid/usbhid.h        |   1 +
+ drivers/hid/wacom_sys.c            |   4 +-
+ drivers/hid/wacom_wac.c            |  88 +++++--------------
+ 13 files changed, 249 insertions(+), 84 deletions(-)
+Merging i2c/i2c/for-next (d92067dace29 Merge branch 'i2c/for-current-fixed' into i2c/for-next)
+$ git merge i2c/i2c/for-next
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/i2c/i2c-qcom-cci.txt       |  92 +++
+ Documentation/devicetree/bindings/i2c/i2c.txt      |  66 +-
+ .../devicetree/bindings/i2c/st,stm32-i2c.yaml      |   8 +-
+ drivers/i2c/busses/Kconfig                         |  14 +-
+ drivers/i2c/busses/Makefile                        |   1 +
+ drivers/i2c/busses/i2c-altera.c                    |   8 +-
+ drivers/i2c/busses/i2c-axxia.c                     |   8 +-
+ drivers/i2c/busses/i2c-bcm-iproc.c                 |  13 +-
+ drivers/i2c/busses/i2c-bcm-kona.c                  |   7 +-
+ drivers/i2c/busses/i2c-brcmstb.c                   |  20 +-
+ drivers/i2c/busses/i2c-cadence.c                   | 323 ++++++++-
+ drivers/i2c/busses/i2c-cht-wc.c                    |   6 +-
+ drivers/i2c/busses/i2c-davinci.c                   |   4 +-
+ drivers/i2c/busses/i2c-designware-master.c         |  37 +-
+ drivers/i2c/busses/i2c-digicolor.c                 |   4 +-
+ drivers/i2c/busses/i2c-emev2.c                     |   4 +-
+ drivers/i2c/busses/i2c-exynos5.c                   |   4 +-
+ drivers/i2c/busses/i2c-hix5hd2.c                   |   4 +-
+ drivers/i2c/busses/i2c-i801.c                      |   6 +-
+ drivers/i2c/busses/i2c-img-scb.c                   |   8 +-
+ drivers/i2c/busses/i2c-imx-lpi2c.c                 |   4 +-
+ drivers/i2c/busses/i2c-jz4780.c                    |   4 +-
+ drivers/i2c/busses/i2c-lpc2k.c                     |   8 +-
+ drivers/i2c/busses/i2c-meson.c                     |   8 +-
+ drivers/i2c/busses/i2c-mv64xxx.c                   |   4 +-
+ drivers/i2c/busses/i2c-octeon-platdrv.c            |   4 +-
+ drivers/i2c/busses/i2c-omap.c                      |   4 +-
+ drivers/i2c/busses/i2c-owl.c                       |   8 +-
+ drivers/i2c/busses/i2c-pca-platform.c              |   3 +-
+ drivers/i2c/busses/i2c-piix4.c                     |   3 +-
+ drivers/i2c/busses/i2c-pnx.c                       |   1 -
+ drivers/i2c/busses/i2c-powermac.c                  |  16 +-
+ drivers/i2c/busses/i2c-pxa.c                       |   4 +-
+ drivers/i2c/busses/i2c-qcom-cci.c                  | 791 +++++++++++++++++++++
+ drivers/i2c/busses/i2c-qup.c                       |  18 +-
+ drivers/i2c/busses/i2c-rcar.c                      |   4 +-
+ drivers/i2c/busses/i2c-rk3x.c                      |   8 +-
+ drivers/i2c/busses/i2c-sirf.c                      |   4 +-
+ drivers/i2c/busses/i2c-sprd.c                      |   4 +-
+ drivers/i2c/busses/i2c-stm32.c                     |  10 +-
+ drivers/i2c/busses/i2c-stm32f4.c                   |   4 +-
+ drivers/i2c/busses/i2c-stm32f7.c                   | 138 ++--
+ drivers/i2c/busses/i2c-stu300.c                    |   4 +-
+ drivers/i2c/busses/i2c-sun6i-p2wi.c                |   8 +-
+ drivers/i2c/busses/i2c-synquacer.c                 |   8 +-
+ drivers/i2c/busses/i2c-tegra.c                     |  36 +-
+ drivers/i2c/busses/i2c-uniphier-f.c                |   4 +-
+ drivers/i2c/busses/i2c-uniphier.c                  |   4 +-
+ drivers/i2c/busses/i2c-xlp9xx.c                    |   8 +-
+ drivers/i2c/busses/i2c-xlr.c                       |   4 +-
+ drivers/i2c/busses/i2c-zx2967.c                    |   4 +-
+ drivers/i2c/i2c-core-base.c                        |  69 +-
+ drivers/i2c/i2c-slave-eeprom.c                     |  25 +
+ drivers/platform/mellanox/mlxreg-hotplug.c         |  11 +-
+ 54 files changed, 1520 insertions(+), 354 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
+ create mode 100644 drivers/i2c/busses/i2c-qcom-cci.c
+Merging i3c/i3c/next (b4203ce05563 i3c master: GETMRL's 3rd byte is optional even with BCR_IBI_PAYLOAD)
+$ git merge i3c/i3c/next
+Merge made by the 'recursive' strategy.
+ drivers/i3c/master.c | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+Merging dmi/master (8cf87c744696 firmware/dmi: Report DMI Bios & EC firmware release)
+$ git merge dmi/master
+Auto-merging scripts/mod/file2alias.c
+Auto-merging include/linux/mod_devicetable.h
+Auto-merging drivers/firmware/dmi_scan.c
+Merge made by the 'recursive' strategy.
+ drivers/firmware/dmi-id.c       |  6 ++++++
+ drivers/firmware/dmi_scan.c     | 30 ++++++++++++++++++++++++++++++
+ include/linux/mod_devicetable.h |  2 ++
+ scripts/mod/file2alias.c        |  2 ++
+ 4 files changed, 40 insertions(+)
+Merging hwmon-staging/hwmon-next (65b7e54c6adb hwmon: (lm70) Add support for ACPI)
+$ git merge hwmon-staging/hwmon-next
+Merge made by the 'recursive' strategy.
+ drivers/hwmon/Kconfig          |   6 +-
+ drivers/hwmon/dell-smm-hwmon.c |  26 +-------
+ drivers/hwmon/lm70.c           |  47 +++++++++++---
+ drivers/hwmon/nct7904.c        | 138 ++++++++++++++++++++++++++++++++++++++++-
+ 4 files changed, 183 insertions(+), 34 deletions(-)
+Merging jc_docs/docs-next (ec43a27fffd0 scripts: sphinx-pre-install: change the output order)
+$ git merge jc_docs/docs-next
+Auto-merging tools/include/uapi/linux/kvm.h
+Auto-merging mm/gup.c
+Auto-merging include/linux/mm.h
+Auto-merging fs/namespace.c
+Auto-merging fs/fuse/dev.c
+Auto-merging fs/Kconfig.binfmt
+Auto-merging drivers/base/platform.c
+Auto-merging drivers/base/core.c
+Auto-merging MAINTAINERS
+Auto-merging Documentation/userspace-api/ioctl/ioctl-number.rst
+Auto-merging Documentation/arm64/booting.rst
+CONFLICT (content): Merge conflict in Documentation/arm64/booting.rst
+Auto-merging Documentation/arm64/amu.rst
+CONFLICT (content): Merge conflict in Documentation/arm64/amu.rst
+Resolved 'Documentation/arm64/amu.rst' using previous resolution.
+Resolved 'Documentation/arm64/booting.rst' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+[master 424f9b5e352a] Merge remote-tracking branch 'jc_docs/docs-next'
+$ git diff -M --stat --summary HEAD^..
+ .mailmap                                           |   1 +
+ Documentation/ABI/stable/sysfs-devices-node        |   2 +-
+ Documentation/ABI/testing/procfs-smaps_rollup      |   2 +-
+ Documentation/Makefile                             |   6 +-
+ Documentation/PCI/boot-interrupts.rst              |  34 ++-
+ Documentation/admin-guide/cpu-load.rst             |   2 +-
+ Documentation/admin-guide/init.rst                 |  76 +++--
+ Documentation/admin-guide/mm/userfaultfd.rst       | 211 ++++++-------
+ Documentation/admin-guide/nfs/nfsroot.rst          |   2 +-
+ Documentation/admin-guide/ras.rst                  |  18 +-
+ Documentation/admin-guide/sysctl/kernel.rst        |  34 +++
+ Documentation/arm64/booting.rst                    |  36 ++-
+ Documentation/conf.py                              |  38 ---
+ Documentation/core-api/index.rst                   |   2 +
+ Documentation/core-api/printk-basics.rst           | 115 +++++++
+ Documentation/core-api/printk-formats.rst          |   2 +
+ Documentation/{rbtree.txt => core-api/rbtree.rst}  |   0
+ Documentation/doc-guide/maintainer-profile.rst     |   2 +-
+ Documentation/driver-api/dma-buf.rst               |   4 +-
+ Documentation/driver-api/driver-model/device.rst   |   4 +-
+ Documentation/driver-api/driver-model/overview.rst |   2 +-
+ Documentation/driver-api/nvdimm/nvdimm.rst         |   4 +-
+ Documentation/filesystems/9p.rst                   |   2 +-
+ Documentation/filesystems/dax.txt                  |   2 +-
+ Documentation/filesystems/dnotify.txt              |   2 +-
+ Documentation/filesystems/orangefs.rst             |   4 +-
+ .../filesystems/ramfs-rootfs-initramfs.rst         |   2 +-
+ Documentation/filesystems/sysfs.rst                |   2 +-
+ Documentation/i2c/{i2c.svg => i2c_bus.svg}         |   2 +-
+ Documentation/i2c/summary.rst                      |   2 +-
+ Documentation/memory-barriers.txt                  |   2 +-
+ Documentation/powerpc/cxl.rst                      |   2 +
+ Documentation/powerpc/firmware-assisted-dump.rst   |   2 +-
+ Documentation/process/adding-syscalls.rst          |   2 +-
+ Documentation/process/submit-checklist.rst         |   2 +-
+ Documentation/scheduler/sched-domains.rst          |  10 +-
+ Documentation/sphinx/requirements.txt              |   2 +-
+ .../translations/it_IT/process/adding-syscalls.rst |   2 +-
+ .../translations/it_IT/process/email-clients.rst   | 332 ++++++++++++++++++++-
+ Documentation/translations/it_IT/process/index.rst |   1 +
+ .../it_IT/process/management-style.rst             | 293 +++++++++++++++++-
+ .../it_IT/process/submit-checklist.rst             |   2 +-
+ .../translations/it_IT/riscv/patch-acceptance.rst  |  40 +++
+ .../translations/ko_KR/memory-barriers.txt         |   2 +-
+ .../translations/zh_CN/filesystems/sysfs.txt       |   8 +-
+ .../zh_CN/process/submit-checklist.rst             |   2 +-
+ .../zh_CN/video4linux/v4l2-framework.txt           |   2 +-
+ Documentation/userspace-api/ioctl/ioctl-number.rst |   1 +
+ Documentation/virt/kvm/amd-memory-encryption.rst   |   2 +-
+ Documentation/virt/kvm/arm/pvtime.rst              |   2 +-
+ Documentation/virt/kvm/devices/vcpu.rst            |   2 +-
+ Documentation/virt/kvm/hypercalls.rst              |   4 +-
+ Documentation/virt/kvm/mmu.rst                     |   2 +-
+ Documentation/virt/kvm/review-checklist.rst        |   2 +-
+ Documentation/vm/index.rst                         |   1 +
+ .../watchdog/convert_drivers_to_kernel_api.rst     |   2 +-
+ Documentation/watchdog/watchdog-kernel-api.rst     |   2 +-
+ Documentation/x86/x86_64/uefi.rst                  |   2 +-
+ arch/powerpc/include/uapi/asm/kvm_para.h           |   2 +-
+ arch/x86/kvm/mmu/mmu.c                             |   2 +-
+ drivers/ata/libata-core.c                          |   2 +-
+ drivers/base/core.c                                |   2 +-
+ drivers/base/platform.c                            |   6 +-
+ .../crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c    |   2 +-
+ drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c  |   2 +-
+ .../crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c    |   2 +-
+ drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c  |   2 +-
+ drivers/gpu/drm/Kconfig                            |   2 +-
+ drivers/gpu/drm/drm_ioctl.c                        |   2 +-
+ drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h            |   2 +-
+ drivers/hwtracing/coresight/Kconfig                |   2 +-
+ drivers/media/v4l2-core/v4l2-fwnode.c              |   2 +-
+ fs/Kconfig                                         |   2 +-
+ fs/Kconfig.binfmt                                  |   2 +-
+ fs/adfs/Kconfig                                    |   2 +-
+ fs/affs/Kconfig                                    |   2 +-
+ fs/afs/Kconfig                                     |   6 +-
+ fs/bfs/Kconfig                                     |   2 +-
+ fs/cramfs/Kconfig                                  |   2 +-
+ fs/ecryptfs/Kconfig                                |   2 +-
+ fs/fat/Kconfig                                     |   8 +-
+ fs/fuse/Kconfig                                    |   2 +-
+ fs/fuse/dev.c                                      |   2 +-
+ fs/hfs/Kconfig                                     |   2 +-
+ fs/hpfs/Kconfig                                    |   2 +-
+ fs/inode.c                                         |   6 +-
+ fs/isofs/Kconfig                                   |   2 +-
+ fs/namespace.c                                     |   2 +-
+ fs/notify/inotify/Kconfig                          |   2 +-
+ fs/ntfs/Kconfig                                    |   2 +-
+ fs/ocfs2/Kconfig                                   |   2 +-
+ fs/overlayfs/Kconfig                               |   6 +-
+ fs/proc/Kconfig                                    |   4 +-
+ fs/romfs/Kconfig                                   |   2 +-
+ fs/sysfs/dir.c                                     |   2 +-
+ fs/sysfs/file.c                                    |   2 +-
+ fs/sysfs/mount.c                                   |   2 +-
+ fs/sysfs/symlink.c                                 |   2 +-
+ fs/sysv/Kconfig                                    |   2 +-
+ fs/udf/Kconfig                                     |   2 +-
+ include/linux/kobject.h                            |   2 +-
+ include/linux/kobject_ns.h                         |   2 +-
+ include/linux/mm.h                                 |   4 +-
+ include/linux/printk.h                             | 112 ++++++-
+ include/linux/rbtree.h                             |   2 +-
+ include/linux/rbtree_augmented.h                   |   2 +-
+ include/linux/relay.h                              |   2 +-
+ include/linux/spi/spi.h                            |   1 +
+ include/linux/sysfs.h                              |   2 +-
+ include/linux/watchdog.h                           |   4 +-
+ include/uapi/linux/ethtool_netlink.h               |   2 +-
+ include/uapi/linux/firewire-cdev.h                 |   2 +-
+ include/uapi/linux/kvm.h                           |   4 +-
+ include/uapi/rdma/rdma_user_ioctl_cmds.h           |   2 +-
+ kernel/futex.c                                     |   3 +
+ kernel/relay.c                                     |   2 +-
+ lib/Kconfig                                        |   2 +-
+ lib/bitmap.c                                       |  31 +-
+ lib/kobject.c                                      |   4 +-
+ mm/gup.c                                           |  12 +-
+ scripts/kernel-doc                                 |  41 ++-
+ scripts/sphinx-pre-install                         | 291 +++++++++++++-----
+ tools/include/linux/rbtree.h                       |   2 +-
+ tools/include/linux/rbtree_augmented.h             |   2 +-
+ tools/include/uapi/linux/kvm.h                     |   4 +-
+ virt/kvm/arm/vgic/vgic-mmio-v3.c                   |   2 +-
+ virt/kvm/arm/vgic/vgic.h                           |   4 +-
+ 127 files changed, 1511 insertions(+), 483 deletions(-)
+ create mode 100644 Documentation/core-api/printk-basics.rst
+ rename Documentation/{rbtree.txt => core-api/rbtree.rst} (100%)
+ rename Documentation/i2c/{i2c.svg => i2c_bus.svg} (99%)
+ create mode 100644 Documentation/translations/it_IT/riscv/patch-acceptance.rst
+Merging v4l-dvb/master (e51759f56d31 media: v4l2-ctrls.h: clarify the p_def argument of v4l2_ctrl_new_std_compound)
+$ git merge v4l-dvb/master
+Removing drivers/media/platform/tegra-cec/Makefile
+Removing drivers/media/platform/sti/cec/Makefile
+Removing drivers/media/platform/seco-cec/Makefile
+Removing drivers/media/platform/meson/Makefile
+Removing drivers/media/platform/cros-ec-cec/Makefile
+Auto-merging arch/arm/configs/exynos_defconfig
+Auto-merging MAINTAINERS
+Auto-merging Documentation/translations/zh_CN/video4linux/v4l2-framework.txt
+Removing Documentation/media/v4l-drivers/cardlist.rst
+Removing Documentation/media/media_uapi.rst
+Removing Documentation/media/media_kapi.rst
+Removing Documentation/media/index.rst
+Removing Documentation/media/dvb-drivers/udev.rst
+Removing Documentation/media/dvb-drivers/intro.rst
+Removing Documentation/media/dvb-drivers/index.rst
+Removing Documentation/media/dvb-drivers/faq.rst
+Removing Documentation/media/dvb-drivers/cards.rst
+Removing Documentation/media/dvb-drivers/bt8xx.rst
+Removing Documentation/media/dvb-drivers/avermedia.rst
+Removing Documentation/media/cec-drivers/index.rst
+Removing Documentation/media/.gitignore
+Removing Documentation/devicetree/bindings/media/rockchip-vpu.txt
+Removing Documentation/devicetree/bindings/media/rockchip-rga.txt
+Auto-merging Documentation/admin-guide/kernel-parameters.txt
+Auto-merging Documentation/Makefile
+Merge made by the 'recursive' strategy.
+ Documentation/ABI/testing/debugfs-cec-error-inj    |    2 +-
+ Documentation/Makefile                             |   10 +-
+ Documentation/admin-guide/index.rst                |    1 +
+ Documentation/admin-guide/kernel-parameters.txt    |    4 +-
+ .../media}/au0828-cardlist.rst                     |    0
+ Documentation/admin-guide/media/avermedia.rst      |   94 ++
+ Documentation/admin-guide/media/bt8xx.rst          |  156 +++
+ .../media}/bttv-cardlist.rst                       |    0
+ .../v4l-drivers => admin-guide/media}/bttv.rst     |  443 +++-----
+ Documentation/admin-guide/media/building.rst       |  357 ++++++
+ .../media}/cafe_ccic.rst                           |    0
+ Documentation/admin-guide/media/cardlist.rst       |  721 ++++++++++++
+ Documentation/admin-guide/media/cec-drivers.rst    |   10 +
+ Documentation/admin-guide/media/ci.rst             |   77 ++
+ .../v4l-drivers => admin-guide/media}/cpia2.rst    |   56 +-
+ Documentation/admin-guide/media/cx18-cardlist.rst  |   17 +
+ .../admin-guide/media/cx231xx-cardlist.rst         |   99 ++
+ .../media}/cx23885-cardlist.rst                    |    4 +
+ .../media}/cx88-cardlist.rst                       |    4 +
+ Documentation/admin-guide/media/cx88.rst           |   58 +
+ .../media}/davinci-vpbe.rst                        |   42 +-
+ Documentation/admin-guide/media/dvb-drivers.rst    |   16 +
+ .../admin-guide/media/dvb-usb-a800-cardlist.rst    |   16 +
+ .../admin-guide/media/dvb-usb-af9005-cardlist.rst  |   20 +
+ .../admin-guide/media/dvb-usb-af9015-cardlist.rst  |   80 ++
+ .../admin-guide/media/dvb-usb-af9035-cardlist.rst  |   74 ++
+ .../admin-guide/media/dvb-usb-anysee-cardlist.rst  |   16 +
+ .../admin-guide/media/dvb-usb-au6610-cardlist.rst  |   16 +
+ .../admin-guide/media/dvb-usb-az6007-cardlist.rst  |   20 +
+ .../admin-guide/media/dvb-usb-az6027-cardlist.rst  |   24 +
+ .../admin-guide/media/dvb-usb-ce6230-cardlist.rst  |   18 +
+ .../media/dvb-usb-cinergyT2-cardlist.rst           |   16 +
+ .../admin-guide/media/dvb-usb-cxusb-cardlist.rst   |   40 +
+ .../admin-guide/media/dvb-usb-dib0700-cardlist.rst |  162 +++
+ .../media/dvb-usb-dibusb-mb-cardlist.rst           |   42 +
+ .../media/dvb-usb-dibusb-mc-cardlist.rst           |   30 +
+ .../admin-guide/media/dvb-usb-digitv-cardlist.rst  |   16 +
+ .../admin-guide/media/dvb-usb-dtt200u-cardlist.rst |   22 +
+ .../admin-guide/media/dvb-usb-dtv5100-cardlist.rst |   16 +
+ .../admin-guide/media/dvb-usb-dvbsky-cardlist.rst  |   42 +
+ .../admin-guide/media/dvb-usb-dw2102-cardlist.rst  |   52 +
+ .../admin-guide/media/dvb-usb-ec168-cardlist.rst   |   16 +
+ .../admin-guide/media/dvb-usb-gl861-cardlist.rst   |   20 +
+ .../admin-guide/media/dvb-usb-gp8psk-cardlist.rst  |   22 +
+ .../admin-guide/media/dvb-usb-lmedm04-cardlist.rst |   20 +
+ .../admin-guide/media/dvb-usb-m920x-cardlist.rst   |   26 +
+ .../media/dvb-usb-mxl111sf-cardlist.rst            |   36 +
+ .../media/dvb-usb-nova-t-usb2-cardlist.rst         |   16 +
+ .../admin-guide/media/dvb-usb-opera1-cardlist.rst  |   16 +
+ .../media/dvb-usb-pctv452e-cardlist.rst            |   20 +
+ .../media/dvb-usb-rtl28xxu-cardlist.rst            |   80 ++
+ .../media/dvb-usb-technisat-usb2-cardlist.rst      |   16 +
+ .../admin-guide/media/dvb-usb-ttusb2-cardlist.rst  |   24 +
+ .../admin-guide/media/dvb-usb-umt-010-cardlist.rst |   16 +
+ .../admin-guide/media/dvb-usb-vp702x-cardlist.rst  |   16 +
+ .../admin-guide/media/dvb-usb-vp7045-cardlist.rst  |   18 +
+ .../admin-guide/media/dvb-usb-zd1301-cardlist.rst  |   16 +
+ Documentation/admin-guide/media/dvb.rst            |   12 +
+ Documentation/admin-guide/media/dvb_intro.rst      |  616 +++++++++++
+ Documentation/admin-guide/media/dvb_references.rst |   29 +
+ .../media}/em28xx-cardlist.rst                     |   10 +-
+ Documentation/admin-guide/media/faq.rst            |  216 ++++
+ .../v4l-drivers => admin-guide/media}/fimc.rst     |   22 +-
+ .../admin-guide/media/frontend-cardlist.rst        |  226 ++++
+ .../media}/gspca-cardlist.rst                      |    0
+ .../v4l-drivers => admin-guide/media}/imx.rst      |  227 ++--
+ .../admin-guide/media/imx6q-sabreauto.dot          |   51 +
+ Documentation/admin-guide/media/imx6q-sabresd.dot  |   56 +
+ .../v4l-drivers => admin-guide/media}/imx7.rst     |    0
+ Documentation/admin-guide/media/index.rst          |   61 ++
+ Documentation/admin-guide/media/intro.rst          |   27 +
+ .../v4l-drivers => admin-guide/media}/ipu3.rst     |   29 +-
+ .../v4l-drivers => admin-guide/media}/ipu3_rcb.svg |    0
+ .../media}/ivtv-cardlist.rst                       |    0
+ .../v4l-drivers => admin-guide/media}/ivtv.rst     |    0
+ .../dvb-drivers => admin-guide/media}/lmedm04.rst  |    0
+ .../v4l-drivers => admin-guide/media}/meye.rst     |   41 -
+ Documentation/admin-guide/media/omap3isp.rst       |   92 ++
+ .../media}/omap4_camera.rst                        |    0
+ .../media}/opera-firmware.rst                      |    0
+ .../admin-guide/media/other-usb-cardlist.rst       |   92 ++
+ .../v4l-drivers => admin-guide/media}/philips.rst  |    0
+ .../media}/pulse8-cec.rst                          |    0
+ .../media}/qcom_camss.rst                          |    0
+ .../media}/qcom_camss_8x96_graph.dot               |    0
+ .../media}/qcom_camss_graph.dot                    |    0
+ .../media}/rcar-fdp1.rst                           |    0
+ .../media/remote-controller.rst}                   |    9 +-
+ .../media}/saa7134-cardlist.rst                    |    0
+ Documentation/admin-guide/media/saa7134.rst        |   88 ++
+ .../media}/saa7164-cardlist.rst                    |    0
+ .../v4l-drivers => admin-guide/media}/si470x.rst   |    0
+ .../v4l-drivers => admin-guide/media}/si4713.rst   |    0
+ .../v4l-drivers => admin-guide/media}/si476x.rst   |    0
+ Documentation/admin-guide/media/siano-cardlist.rst |   56 +
+ .../media}/technisat.rst                           |    0
+ .../media}/tm6000-cardlist.rst                     |    0
+ .../media}/ttusb-dec.rst                           |    0
+ .../media}/tuner-cardlist.rst                      |    0
+ .../media}/usbvision-cardlist.rst                  |    0
+ Documentation/admin-guide/media/v4l-drivers.rst    |   33 +
+ .../v4l-drivers => admin-guide/media}/vimc.dot     |    0
+ .../v4l-drivers => admin-guide/media}/vimc.rst     |   11 -
+ .../v4l-drivers => admin-guide/media}/vivid.rst    |    0
+ .../v4l-drivers => admin-guide/media}/zr364xx.rst  |   28 +-
+ .../devicetree/bindings/media/rockchip,vdec.yaml   |   73 ++
+ .../devicetree/bindings/media/rockchip-rga.txt     |   34 -
+ .../devicetree/bindings/media/rockchip-rga.yaml    |   83 ++
+ .../devicetree/bindings/media/rockchip-vpu.txt     |   43 -
+ .../devicetree/bindings/media/rockchip-vpu.yaml    |   74 ++
+ Documentation/doc-guide/parse-headers.rst          |    2 +-
+ Documentation/driver-api/index.rst                 |    1 +
+ .../{media/kapi => driver-api/media}/cec-core.rst  |    0
+ .../{media/kapi => driver-api/media}/csi2.rst      |    0
+ .../driver-api/media/drivers/bttv-devel.rst        |  116 ++
+ .../media/drivers}/contributors.rst                |    0
+ .../driver-api/media/drivers/cpia2_devel.rst       |   56 +
+ .../media/drivers/cx2341x-devel.rst}               |  175 ---
+ .../media/drivers/cx88-devel.rst}                  |   52 -
+ .../media/drivers/davinci-vpbe-devel.rst           |   39 +
+ .../media/drivers}/dvb-usb.rst                     |    0
+ .../driver-api/media/drivers/fimc-devel.rst        |   33 +
+ .../media/drivers}/frontends.rst                   |    0
+ Documentation/driver-api/media/drivers/index.rst   |   38 +
+ .../media/drivers}/pvrusb2.rst                     |    0
+ .../media/drivers}/pxa_camera.rst                  |    0
+ .../media/drivers}/radiotrack.rst                  |    0
+ .../media/drivers/saa7134-devel.rst}               |   48 -
+ .../media/drivers}/sh_mobile_ceu_camera.rst        |    0
+ .../media/drivers}/tuners.rst                      |    0
+ .../driver-api/media/drivers/vimc-devel.rst        |   15 +
+ .../{media/kapi => driver-api/media}/dtv-ca.rst    |    0
+ .../kapi => driver-api/media}/dtv-common.rst       |    0
+ .../{media/kapi => driver-api/media}/dtv-core.rst  |    0
+ .../{media/kapi => driver-api/media}/dtv-demux.rst |    0
+ .../kapi => driver-api/media}/dtv-frontend.rst     |    0
+ .../{media/kapi => driver-api/media}/dtv-net.rst   |    0
+ Documentation/driver-api/media/index.rst           |   54 +
+ .../{media/kapi => driver-api/media}/mc-core.rst   |    0
+ .../{media/kapi => driver-api/media}/rc-core.rst   |    0
+ .../kapi => driver-api/media}/v4l2-async.rst       |    0
+ .../kapi => driver-api/media}/v4l2-clocks.rst      |    0
+ .../kapi => driver-api/media}/v4l2-common.rst      |    0
+ .../kapi => driver-api/media}/v4l2-controls.rst    |    0
+ .../{media/kapi => driver-api/media}/v4l2-core.rst |    0
+ .../{media/kapi => driver-api/media}/v4l2-dev.rst  |    0
+ .../kapi => driver-api/media}/v4l2-device.rst      |    0
+ .../kapi => driver-api/media}/v4l2-dv-timings.rst  |    0
+ .../kapi => driver-api/media}/v4l2-event.rst       |    0
+ .../{media/kapi => driver-api/media}/v4l2-fh.rst   |    0
+ .../media}/v4l2-flash-led-class.rst                |    0
+ .../kapi => driver-api/media}/v4l2-fwnode.rst      |    0
+ .../kapi => driver-api/media}/v4l2-intro.rst       |    0
+ .../{media/kapi => driver-api/media}/v4l2-mc.rst   |    0
+ .../kapi => driver-api/media}/v4l2-mediabus.rst    |    0
+ .../kapi => driver-api/media}/v4l2-mem2mem.rst     |    0
+ .../{media/kapi => driver-api/media}/v4l2-rect.rst |    0
+ .../kapi => driver-api/media}/v4l2-subdev.rst      |    0
+ .../kapi => driver-api/media}/v4l2-tuner.rst       |    0
+ .../kapi => driver-api/media}/v4l2-tveeprom.rst    |    0
+ .../kapi => driver-api/media}/v4l2-videobuf.rst    |    5 +-
+ .../kapi => driver-api/media}/v4l2-videobuf2.rst   |    0
+ Documentation/fb/api.rst                           |    4 +-
+ Documentation/index.rst                            |    1 -
+ Documentation/media/.gitignore                     |    5 -
+ Documentation/media/cec-drivers/index.rst          |   34 -
+ Documentation/media/dvb-drivers/avermedia.rst      |  269 -----
+ Documentation/media/dvb-drivers/bt8xx.rst          |  124 ---
+ Documentation/media/dvb-drivers/cards.rst          |  146 ---
+ Documentation/media/dvb-drivers/faq.rst            |  169 ---
+ Documentation/media/dvb-drivers/index.rst          |   45 -
+ Documentation/media/dvb-drivers/intro.rst          |   23 -
+ Documentation/media/dvb-drivers/udev.rst           |   63 --
+ Documentation/media/index.rst                      |   26 -
+ Documentation/media/media_kapi.rst                 |   38 -
+ Documentation/media/media_uapi.rst                 |   33 -
+ Documentation/media/v4l-drivers/cardlist.rst       |   20 -
+ .../translations/it_IT/doc-guide/parse-headers.rst |    2 +-
+ .../translations/zh_CN/video4linux/omap3isp.txt    |    4 +-
+ .../zh_CN/video4linux/v4l2-framework.txt           |    6 +-
+ Documentation/userspace-api/index.rst              |    1 +
+ Documentation/{ => userspace-api}/media/Makefile   |    2 +-
+ .../media/audio.h.rst.exceptions                   |    0
+ .../{ => userspace-api}/media/ca.h.rst.exceptions  |    0
+ .../{ => userspace-api}/media/cec.h.rst.exceptions |    0
+ .../uapi => userspace-api/media}/cec/cec-api.rst   |    2 +-
+ .../media}/cec/cec-func-close.rst                  |    2 +-
+ .../media}/cec/cec-func-ioctl.rst                  |    2 +-
+ .../media}/cec/cec-func-open.rst                   |    2 +-
+ .../media}/cec/cec-func-poll.rst                   |    2 +-
+ .../uapi => userspace-api/media}/cec/cec-funcs.rst |    2 +-
+ .../media}/cec/cec-header.rst                      |    2 +-
+ .../uapi => userspace-api/media}/cec/cec-intro.rst |    2 +-
+ .../media}/cec/cec-ioc-adap-g-caps.rst             |    2 +-
+ .../media}/cec/cec-ioc-adap-g-conn-info.rst        |    0
+ .../media}/cec/cec-ioc-adap-g-log-addrs.rst        |    2 +-
+ .../media}/cec/cec-ioc-adap-g-phys-addr.rst        |    2 +-
+ .../media}/cec/cec-ioc-dqevent.rst                 |    2 +-
+ .../media}/cec/cec-ioc-g-mode.rst                  |    2 +-
+ .../media}/cec/cec-ioc-receive.rst                 |    2 +-
+ .../media}/cec/cec-pin-error-inj.rst               |    2 +-
+ .../{ => userspace-api}/media/conf_nitpick.py      |    0
+ .../{ => userspace-api}/media/dmx.h.rst.exceptions |    0
+ .../userspace-api/media/drivers/cx2341x-uapi.rst   |  179 +++
+ .../userspace-api/media/drivers/imx-uapi.rst       |  125 +++
+ .../media/drivers}/index.rst                       |   39 +-
+ .../media/drivers}/max2175.rst                     |    2 +-
+ .../userspace-api/media/drivers/meye-uapi.rst      |   53 +
+ .../media/drivers/omap3isp-uapi.rst}               |   80 +-
+ .../media/drivers}/uvcvideo.rst                    |    0
+ .../media}/dvb/audio-bilingual-channel-select.rst  |    2 +-
+ .../media}/dvb/audio-channel-select.rst            |    2 +-
+ .../media}/dvb/audio-clear-buffer.rst              |    2 +-
+ .../media}/dvb/audio-continue.rst                  |    2 +-
+ .../media}/dvb/audio-fclose.rst                    |    2 +-
+ .../media}/dvb/audio-fopen.rst                     |    2 +-
+ .../media}/dvb/audio-fwrite.rst                    |    2 +-
+ .../media}/dvb/audio-get-capabilities.rst          |    2 +-
+ .../media}/dvb/audio-get-status.rst                |    2 +-
+ .../media}/dvb/audio-pause.rst                     |    2 +-
+ .../media}/dvb/audio-play.rst                      |    2 +-
+ .../media}/dvb/audio-select-source.rst             |    2 +-
+ .../media}/dvb/audio-set-av-sync.rst               |    2 +-
+ .../media}/dvb/audio-set-bypass-mode.rst           |    2 +-
+ .../media}/dvb/audio-set-id.rst                    |    2 +-
+ .../media}/dvb/audio-set-mixer.rst                 |    2 +-
+ .../media}/dvb/audio-set-mute.rst                  |    2 +-
+ .../media}/dvb/audio-set-streamtype.rst            |    2 +-
+ .../media}/dvb/audio-stop.rst                      |    2 +-
+ .../uapi => userspace-api/media}/dvb/audio.rst     |    2 +-
+ .../media}/dvb/audio_data_types.rst                |    2 +-
+ .../media}/dvb/audio_function_calls.rst            |    2 +-
+ .../uapi => userspace-api/media}/dvb/ca-fclose.rst |    2 +-
+ .../uapi => userspace-api/media}/dvb/ca-fopen.rst  |    2 +-
+ .../media}/dvb/ca-get-cap.rst                      |    2 +-
+ .../media}/dvb/ca-get-descr-info.rst               |    2 +-
+ .../media}/dvb/ca-get-msg.rst                      |    2 +-
+ .../media}/dvb/ca-get-slot-info.rst                |    2 +-
+ .../uapi => userspace-api/media}/dvb/ca-reset.rst  |    2 +-
+ .../media}/dvb/ca-send-msg.rst                     |    2 +-
+ .../media}/dvb/ca-set-descr.rst                    |    2 +-
+ .../{media/uapi => userspace-api/media}/dvb/ca.rst |    3 +-
+ .../media}/dvb/ca_data_types.rst                   |    2 +-
+ .../media}/dvb/ca_function_calls.rst               |    2 +-
+ .../media/dvb/ca_high_level.rst}                   |   82 +-
+ .../uapi => userspace-api/media}/dvb/demux.rst     |    2 +-
+ .../media}/dvb/dmx-add-pid.rst                     |    2 +-
+ .../media}/dvb/dmx-expbuf.rst                      |    2 +-
+ .../media}/dvb/dmx-fclose.rst                      |    2 +-
+ .../uapi => userspace-api/media}/dvb/dmx-fopen.rst |    2 +-
+ .../uapi => userspace-api/media}/dvb/dmx-fread.rst |    2 +-
+ .../media}/dvb/dmx-fwrite.rst                      |    2 +-
+ .../media}/dvb/dmx-get-pes-pids.rst                |    2 +-
+ .../media}/dvb/dmx-get-stc.rst                     |    2 +-
+ .../uapi => userspace-api/media}/dvb/dmx-mmap.rst  |    2 +-
+ .../media}/dvb/dmx-munmap.rst                      |    2 +-
+ .../uapi => userspace-api/media}/dvb/dmx-qbuf.rst  |    2 +-
+ .../media}/dvb/dmx-querybuf.rst                    |    2 +-
+ .../media}/dvb/dmx-remove-pid.rst                  |    2 +-
+ .../media}/dvb/dmx-reqbufs.rst                     |    2 +-
+ .../media}/dvb/dmx-set-buffer-size.rst             |    2 +-
+ .../media}/dvb/dmx-set-filter.rst                  |    2 +-
+ .../media}/dvb/dmx-set-pes-filter.rst              |    2 +-
+ .../uapi => userspace-api/media}/dvb/dmx-start.rst |    2 +-
+ .../uapi => userspace-api/media}/dvb/dmx-stop.rst  |    2 +-
+ .../media}/dvb/dmx_fcalls.rst                      |    2 +-
+ .../uapi => userspace-api/media}/dvb/dmx_types.rst |    2 +-
+ .../media}/dvb/dvb-fe-read-status.rst              |    2 +-
+ .../media}/dvb/dvb-frontend-event.rst              |    2 +-
+ .../media}/dvb/dvb-frontend-parameters.rst         |    2 +-
+ .../uapi => userspace-api/media}/dvb/dvbapi.rst    |    2 +-
+ .../media}/dvb/dvbproperty.rst                     |    2 +-
+ .../uapi => userspace-api/media}/dvb/dvbstb.svg    |    2 +-
+ .../uapi => userspace-api/media}/dvb/examples.rst  |    2 +-
+ .../media}/dvb/fe-bandwidth-t.rst                  |    2 +-
+ .../media}/dvb/fe-diseqc-recv-slave-reply.rst      |    2 +-
+ .../media}/dvb/fe-diseqc-reset-overload.rst        |    2 +-
+ .../media}/dvb/fe-diseqc-send-burst.rst            |    2 +-
+ .../media}/dvb/fe-diseqc-send-master-cmd.rst       |    2 +-
+ .../media}/dvb/fe-dishnetwork-send-legacy-cmd.rst  |    2 +-
+ .../media}/dvb/fe-enable-high-lnb-voltage.rst      |    2 +-
+ .../media}/dvb/fe-get-event.rst                    |    2 +-
+ .../media}/dvb/fe-get-frontend.rst                 |    2 +-
+ .../media}/dvb/fe-get-info.rst                     |    2 +-
+ .../media}/dvb/fe-get-property.rst                 |    2 +-
+ .../media}/dvb/fe-read-ber.rst                     |    2 +-
+ .../media}/dvb/fe-read-signal-strength.rst         |    2 +-
+ .../media}/dvb/fe-read-snr.rst                     |    2 +-
+ .../media}/dvb/fe-read-status.rst                  |    2 +-
+ .../media}/dvb/fe-read-uncorrected-blocks.rst      |    2 +-
+ .../media}/dvb/fe-set-frontend-tune-mode.rst       |    2 +-
+ .../media}/dvb/fe-set-frontend.rst                 |    2 +-
+ .../media}/dvb/fe-set-tone.rst                     |    2 +-
+ .../media}/dvb/fe-set-voltage.rst                  |    2 +-
+ .../uapi => userspace-api/media}/dvb/fe-type-t.rst |    2 +-
+ .../media}/dvb/fe_property_parameters.rst          |    2 +-
+ .../media}/dvb/frontend-header.rst                 |    2 +-
+ .../media}/dvb/frontend-property-cable-systems.rst |    2 +-
+ .../dvb/frontend-property-satellite-systems.rst    |    2 +-
+ .../dvb/frontend-property-terrestrial-systems.rst  |    2 +-
+ .../media}/dvb/frontend-stat-properties.rst        |    2 +-
+ .../uapi => userspace-api/media}/dvb/frontend.rst  |    2 +-
+ .../media}/dvb/frontend_f_close.rst                |    2 +-
+ .../media}/dvb/frontend_f_open.rst                 |    2 +-
+ .../media}/dvb/frontend_fcalls.rst                 |    2 +-
+ .../media}/dvb/frontend_legacy_api.rst             |    2 +-
+ .../media}/dvb/frontend_legacy_dvbv3_api.rst       |    2 +-
+ .../uapi => userspace-api/media}/dvb/headers.rst   |    2 +-
+ .../uapi => userspace-api/media}/dvb/intro.rst     |    2 +-
+ .../media}/dvb/legacy_dvb_apis.rst                 |    2 +-
+ .../media}/dvb/net-add-if.rst                      |    2 +-
+ .../media}/dvb/net-get-if.rst                      |    2 +-
+ .../media}/dvb/net-remove-if.rst                   |    2 +-
+ .../uapi => userspace-api/media}/dvb/net-types.rst |    2 +-
+ .../uapi => userspace-api/media}/dvb/net.rst       |    2 +-
+ .../media}/dvb/query-dvb-frontend-info.rst         |    2 +-
+ .../media}/dvb/video-clear-buffer.rst              |    2 +-
+ .../media}/dvb/video-command.rst                   |    2 +-
+ .../media}/dvb/video-continue.rst                  |    2 +-
+ .../media}/dvb/video-fast-forward.rst              |    2 +-
+ .../media}/dvb/video-fclose.rst                    |    2 +-
+ .../media}/dvb/video-fopen.rst                     |    2 +-
+ .../media}/dvb/video-freeze.rst                    |    2 +-
+ .../media}/dvb/video-fwrite.rst                    |    2 +-
+ .../media}/dvb/video-get-capabilities.rst          |    2 +-
+ .../media}/dvb/video-get-event.rst                 |    2 +-
+ .../media}/dvb/video-get-frame-count.rst           |    2 +-
+ .../media}/dvb/video-get-pts.rst                   |    2 +-
+ .../media}/dvb/video-get-size.rst                  |    2 +-
+ .../media}/dvb/video-get-status.rst                |    2 +-
+ .../media}/dvb/video-play.rst                      |    2 +-
+ .../media}/dvb/video-select-source.rst             |    2 +-
+ .../media}/dvb/video-set-blank.rst                 |    2 +-
+ .../media}/dvb/video-set-display-format.rst        |    2 +-
+ .../media}/dvb/video-set-format.rst                |    2 +-
+ .../media}/dvb/video-set-streamtype.rst            |    2 +-
+ .../media}/dvb/video-slowmotion.rst                |    2 +-
+ .../media}/dvb/video-stillpicture.rst              |    2 +-
+ .../media}/dvb/video-stop.rst                      |    2 +-
+ .../media}/dvb/video-try-command.rst               |    2 +-
+ .../uapi => userspace-api/media}/dvb/video.rst     |    2 +-
+ .../media}/dvb/video_function_calls.rst            |    2 +-
+ .../media}/dvb/video_types.rst                     |    2 +-
+ .../uapi => userspace-api/media}/fdl-appendix.rst  |    2 +-
+ .../media/frontend.h.rst.exceptions                |    0
+ .../uapi => userspace-api/media}/gen-errors.rst    |    2 +-
+ Documentation/userspace-api/media/index.rst        |   67 ++
+ Documentation/{ => userspace-api}/media/intro.rst  |    0
+ .../media/lirc.h.rst.exceptions                    |    0
+ .../media/media.h.rst.exceptions                   |    0
+ .../media}/mediactl/media-controller-intro.rst     |    2 +-
+ .../media}/mediactl/media-controller-model.rst     |    2 +-
+ .../media}/mediactl/media-controller.rst           |    2 +-
+ .../media}/mediactl/media-func-close.rst           |    2 +-
+ .../media}/mediactl/media-func-ioctl.rst           |    2 +-
+ .../media}/mediactl/media-func-open.rst            |    2 +-
+ .../media}/mediactl/media-funcs.rst                |    2 +-
+ .../media}/mediactl/media-header.rst               |    2 +-
+ .../media}/mediactl/media-ioc-device-info.rst      |    2 +-
+ .../media}/mediactl/media-ioc-enum-entities.rst    |    2 +-
+ .../media}/mediactl/media-ioc-enum-links.rst       |    2 +-
+ .../media}/mediactl/media-ioc-g-topology.rst       |    2 +-
+ .../media}/mediactl/media-ioc-request-alloc.rst    |    2 +-
+ .../media}/mediactl/media-ioc-setup-link.rst       |    2 +-
+ .../media}/mediactl/media-request-ioc-queue.rst    |    2 +-
+ .../media}/mediactl/media-request-ioc-reinit.rst   |    2 +-
+ .../media}/mediactl/media-types.rst                |    2 +-
+ .../media}/mediactl/request-api.rst                |    2 +-
+ .../media}/mediactl/request-func-close.rst         |    2 +-
+ .../media}/mediactl/request-func-ioctl.rst         |    2 +-
+ .../media}/mediactl/request-func-poll.rst          |    2 +-
+ .../{ => userspace-api}/media/net.h.rst.exceptions |    0
+ .../uapi => userspace-api/media}/rc/keytable.c.rst |    2 +-
+ .../media}/rc/lirc-dev-intro.rst                   |    2 +-
+ .../uapi => userspace-api/media}/rc/lirc-dev.rst   |    2 +-
+ .../uapi => userspace-api/media}/rc/lirc-func.rst  |    2 +-
+ .../media}/rc/lirc-get-features.rst                |    2 +-
+ .../media}/rc/lirc-get-rec-mode.rst                |    2 +-
+ .../media}/rc/lirc-get-rec-resolution.rst          |    2 +-
+ .../media}/rc/lirc-get-send-mode.rst               |    2 +-
+ .../media}/rc/lirc-get-timeout.rst                 |    2 +-
+ .../media}/rc/lirc-header.rst                      |    2 +-
+ .../uapi => userspace-api/media}/rc/lirc-read.rst  |    2 +-
+ .../media}/rc/lirc-set-measure-carrier-mode.rst    |    2 +-
+ .../media}/rc/lirc-set-rec-carrier-range.rst       |    2 +-
+ .../media}/rc/lirc-set-rec-carrier.rst             |    2 +-
+ .../media}/rc/lirc-set-rec-timeout-reports.rst     |    2 +-
+ .../media}/rc/lirc-set-rec-timeout.rst             |    2 +-
+ .../media}/rc/lirc-set-send-carrier.rst            |    2 +-
+ .../media}/rc/lirc-set-send-duty-cycle.rst         |    2 +-
+ .../media}/rc/lirc-set-transmitter-mask.rst        |    2 +-
+ .../media}/rc/lirc-set-wideband-receiver.rst       |    2 +-
+ .../uapi => userspace-api/media}/rc/lirc-write.rst |    2 +-
+ .../uapi => userspace-api/media}/rc/rc-intro.rst   |    2 +-
+ .../uapi => userspace-api/media}/rc/rc-protos.rst  |    0
+ .../media}/rc/rc-sysfs-nodes.rst                   |    2 +-
+ .../media}/rc/rc-table-change.rst                  |    2 +-
+ .../uapi => userspace-api/media}/rc/rc-tables.rst  |    2 +-
+ .../media}/rc/remote_controllers.rst               |    2 +-
+ .../media/typical_media_device.svg                 |    2 +-
+ .../uapi => userspace-api/media}/v4l/app-pri.rst   |    2 +-
+ .../uapi => userspace-api/media}/v4l/async.rst     |    2 +-
+ .../uapi => userspace-api/media}/v4l/audio.rst     |    2 +-
+ .../uapi => userspace-api/media}/v4l/bayer.svg     |    2 +-
+ .../uapi => userspace-api/media}/v4l/biblio.rst    |    2 +-
+ .../uapi => userspace-api/media}/v4l/buffer.rst    |    2 +-
+ .../media}/v4l/capture-example.rst                 |    2 +-
+ .../uapi => userspace-api/media}/v4l/capture.c.rst |    2 +-
+ .../media}/v4l/colorspaces-defs.rst                |    2 +-
+ .../media}/v4l/colorspaces-details.rst             |    2 +-
+ .../media}/v4l/colorspaces.rst                     |    2 +-
+ .../media}/v4l/common-defs.rst                     |    2 +-
+ .../uapi => userspace-api/media}/v4l/common.rst    |    3 +-
+ .../uapi => userspace-api/media}/v4l/compat.rst    |    2 +-
+ .../media}/v4l/constraints.svg                     |    2 +-
+ .../uapi => userspace-api/media}/v4l/control.rst   |    2 +-
+ .../uapi => userspace-api/media}/v4l/crop.rst      |    2 +-
+ .../uapi => userspace-api/media}/v4l/crop.svg      |    2 +-
+ .../media}/v4l/depth-formats.rst                   |    2 +-
+ .../media}/v4l/dev-capture.rst                     |    2 +-
+ .../media}/v4l/dev-decoder.rst                     |    0
+ .../uapi => userspace-api/media}/v4l/dev-event.rst |    2 +-
+ .../media}/v4l/dev-mem2mem.rst                     |    2 +-
+ .../uapi => userspace-api/media}/v4l/dev-meta.rst  |    2 +-
+ .../uapi => userspace-api/media}/v4l/dev-osd.rst   |    2 +-
+ .../media}/v4l/dev-output.rst                      |    2 +-
+ .../media}/v4l/dev-overlay.rst                     |    2 +-
+ .../uapi => userspace-api/media}/v4l/dev-radio.rst |    2 +-
+ .../media}/v4l/dev-raw-vbi.rst                     |    2 +-
+ .../uapi => userspace-api/media}/v4l/dev-rds.rst   |    2 +-
+ .../uapi => userspace-api/media}/v4l/dev-sdr.rst   |    2 +-
+ .../media}/v4l/dev-sliced-vbi.rst                  |    4 +-
+ .../media}/v4l/dev-stateless-decoder.rst           |    0
+ .../media}/v4l/dev-subdev.rst                      |    2 +-
+ .../uapi => userspace-api/media}/v4l/dev-touch.rst |    2 +-
+ .../uapi => userspace-api/media}/v4l/devices.rst   |    2 +-
+ .../uapi => userspace-api/media}/v4l/diff-v4l.rst  |    2 +-
+ .../uapi => userspace-api/media}/v4l/dmabuf.rst    |    2 +-
+ .../media}/v4l/dv-timings.rst                      |    2 +-
+ .../media}/v4l/ext-ctrls-camera.rst                |    2 +-
+ .../media}/v4l/ext-ctrls-codec.rst                 |   14 +-
+ .../media}/v4l/ext-ctrls-detect.rst                |    2 +-
+ .../media}/v4l/ext-ctrls-dv.rst                    |    2 +-
+ .../media}/v4l/ext-ctrls-flash.rst                 |    2 +-
+ .../media}/v4l/ext-ctrls-fm-rx.rst                 |    2 +-
+ .../media}/v4l/ext-ctrls-fm-tx.rst                 |    2 +-
+ .../media}/v4l/ext-ctrls-image-process.rst         |    4 +-
+ .../media}/v4l/ext-ctrls-image-source.rst          |    2 +-
+ .../media}/v4l/ext-ctrls-jpeg.rst                  |    2 +-
+ .../media}/v4l/ext-ctrls-rf-tuner.rst              |    2 +-
+ .../media}/v4l/extended-controls.rst               |    2 +-
+ .../media}/v4l/field-order.rst                     |    2 +-
+ .../media}/v4l/fieldseq_bt.svg                     |    2 +-
+ .../media}/v4l/fieldseq_tb.svg                     |    2 +-
+ .../uapi => userspace-api/media}/v4l/format.rst    |    2 +-
+ .../media/v4l}/fourcc.rst                          |    0
+ .../media}/v4l/func-close.rst                      |    2 +-
+ .../media}/v4l/func-ioctl.rst                      |    2 +-
+ .../uapi => userspace-api/media}/v4l/func-mmap.rst |    2 +-
+ .../media}/v4l/func-munmap.rst                     |    2 +-
+ .../uapi => userspace-api/media}/v4l/func-open.rst |    2 +-
+ .../uapi => userspace-api/media}/v4l/func-poll.rst |    2 +-
+ .../uapi => userspace-api/media}/v4l/func-read.rst |    2 +-
+ .../media}/v4l/func-select.rst                     |    2 +-
+ .../media}/v4l/func-write.rst                      |    2 +-
+ .../uapi => userspace-api/media}/v4l/hist-v4l2.rst |    2 +-
+ .../media}/v4l/hsv-formats.rst                     |    2 +-
+ .../{media/uapi => userspace-api/media}/v4l/io.rst |    2 +-
+ .../media}/v4l/libv4l-introduction.rst             |    2 +-
+ .../uapi => userspace-api/media}/v4l/libv4l.rst    |    2 +-
+ .../media}/v4l/meta-formats.rst                    |    2 +-
+ .../uapi => userspace-api/media}/v4l/mmap.rst      |    2 +-
+ .../uapi => userspace-api/media}/v4l/nv12mt.svg    |    2 +-
+ .../media}/v4l/nv12mt_example.svg                  |    2 +-
+ .../uapi => userspace-api/media}/v4l/open.rst      |    2 +-
+ .../uapi => userspace-api/media}/v4l/pipeline.dot  |    0
+ .../media}/v4l/pixfmt-bayer.rst                    |    2 +-
+ .../media}/v4l/pixfmt-cnf4.rst                     |    0
+ .../media}/v4l/pixfmt-compressed.rst               |    2 +-
+ .../media}/v4l/pixfmt-grey.rst                     |    2 +-
+ .../media}/v4l/pixfmt-indexed.rst                  |    2 +-
+ .../media}/v4l/pixfmt-intro.rst                    |    2 +-
+ .../media}/v4l/pixfmt-inzi.rst                     |    2 +-
+ .../media}/v4l/pixfmt-m420.rst                     |    2 +-
+ .../media}/v4l/pixfmt-meta-d4xx.rst                |    2 +-
+ .../media}/v4l/pixfmt-meta-intel-ipu3.rst          |    2 +-
+ .../media}/v4l/pixfmt-meta-uvc.rst                 |    2 +-
+ .../media}/v4l/pixfmt-meta-vivid.rst               |    2 +-
+ .../media}/v4l/pixfmt-meta-vsp1-hgo.rst            |    2 +-
+ .../media}/v4l/pixfmt-meta-vsp1-hgt.rst            |    2 +-
+ .../media}/v4l/pixfmt-nv12.rst                     |    2 +-
+ .../media}/v4l/pixfmt-nv12m.rst                    |    2 +-
+ .../media}/v4l/pixfmt-nv12mt.rst                   |    2 +-
+ .../media}/v4l/pixfmt-nv16.rst                     |    2 +-
+ .../media}/v4l/pixfmt-nv16m.rst                    |    2 +-
+ .../media}/v4l/pixfmt-nv24.rst                     |    2 +-
+ .../media}/v4l/pixfmt-packed-hsv.rst               |    2 +-
+ .../media}/v4l/pixfmt-packed-yuv.rst               |    2 +-
+ .../media}/v4l/pixfmt-reserved.rst                 |    4 +-
+ .../media}/v4l/pixfmt-rgb.rst                      |  138 +--
+ .../media}/v4l/pixfmt-sdr-cs08.rst                 |    2 +-
+ .../media}/v4l/pixfmt-sdr-cs14le.rst               |    2 +-
+ .../media}/v4l/pixfmt-sdr-cu08.rst                 |    2 +-
+ .../media}/v4l/pixfmt-sdr-cu16le.rst               |    2 +-
+ .../media}/v4l/pixfmt-sdr-pcu16be.rst              |    2 +-
+ .../media}/v4l/pixfmt-sdr-pcu18be.rst              |    2 +-
+ .../media}/v4l/pixfmt-sdr-pcu20be.rst              |    2 +-
+ .../media}/v4l/pixfmt-sdr-ru12le.rst               |    2 +-
+ .../media}/v4l/pixfmt-srggb10-ipu3.rst             |    2 +-
+ .../media}/v4l/pixfmt-srggb10.rst                  |    2 +-
+ .../media}/v4l/pixfmt-srggb10alaw8.rst             |    2 +-
+ .../media}/v4l/pixfmt-srggb10dpcm8.rst             |    2 +-
+ .../media}/v4l/pixfmt-srggb10p.rst                 |    2 +-
+ .../media}/v4l/pixfmt-srggb12.rst                  |    2 +-
+ .../media}/v4l/pixfmt-srggb12p.rst                 |    2 +-
+ .../media}/v4l/pixfmt-srggb14.rst                  |    2 +-
+ .../media}/v4l/pixfmt-srggb14p.rst                 |    2 +-
+ .../media}/v4l/pixfmt-srggb16.rst                  |    2 +-
+ .../media}/v4l/pixfmt-srggb8.rst                   |    2 +-
+ .../media}/v4l/pixfmt-tch-td08.rst                 |    2 +-
+ .../media}/v4l/pixfmt-tch-td16.rst                 |    2 +-
+ .../media}/v4l/pixfmt-tch-tu08.rst                 |    2 +-
+ .../media}/v4l/pixfmt-tch-tu16.rst                 |    2 +-
+ .../media}/v4l/pixfmt-uv8.rst                      |    2 +-
+ .../media}/v4l/pixfmt-uyvy.rst                     |    2 +-
+ .../media}/v4l/pixfmt-v4l2-mplane.rst              |    2 +-
+ .../media}/v4l/pixfmt-v4l2.rst                     |    2 +-
+ .../media}/v4l/pixfmt-vyuy.rst                     |    2 +-
+ .../media}/v4l/pixfmt-y10.rst                      |    2 +-
+ .../media}/v4l/pixfmt-y10b.rst                     |    2 +-
+ .../media}/v4l/pixfmt-y10p.rst                     |    2 +-
+ .../media}/v4l/pixfmt-y12.rst                      |    2 +-
+ .../media}/v4l/pixfmt-y12i.rst                     |    2 +-
+ .../media}/v4l/pixfmt-y14.rst                      |    2 +-
+ .../media}/v4l/pixfmt-y16-be.rst                   |    2 +-
+ .../media}/v4l/pixfmt-y16.rst                      |    2 +-
+ .../media}/v4l/pixfmt-y41p.rst                     |    2 +-
+ .../media}/v4l/pixfmt-y8i.rst                      |    2 +-
+ .../media}/v4l/pixfmt-yuv410.rst                   |    2 +-
+ .../media}/v4l/pixfmt-yuv411p.rst                  |    2 +-
+ .../media}/v4l/pixfmt-yuv420.rst                   |    2 +-
+ .../media}/v4l/pixfmt-yuv420m.rst                  |    2 +-
+ .../media}/v4l/pixfmt-yuv422m.rst                  |    2 +-
+ .../media}/v4l/pixfmt-yuv422p.rst                  |    2 +-
+ .../media}/v4l/pixfmt-yuv444m.rst                  |    2 +-
+ .../media}/v4l/pixfmt-yuyv.rst                     |    2 +-
+ .../media}/v4l/pixfmt-yvyu.rst                     |    2 +-
+ .../media}/v4l/pixfmt-z16.rst                      |    2 +-
+ .../uapi => userspace-api/media}/v4l/pixfmt.rst    |    2 +-
+ .../media}/v4l/planar-apis.rst                     |    2 +-
+ .../uapi => userspace-api/media}/v4l/querycap.rst  |    2 +-
+ .../{media/uapi => userspace-api/media}/v4l/rw.rst |    2 +-
+ .../media}/v4l/sdr-formats.rst                     |    2 +-
+ .../media}/v4l/selection-api-configuration.rst     |    2 +-
+ .../media}/v4l/selection-api-examples.rst          |    2 +-
+ .../media}/v4l/selection-api-intro.rst             |    2 +-
+ .../media}/v4l/selection-api-targets.rst           |    2 +-
+ .../media}/v4l/selection-api-vs-crop-api.rst       |    2 +-
+ .../media}/v4l/selection-api.rst                   |    2 +-
+ .../uapi => userspace-api/media}/v4l/selection.svg |    2 +-
+ .../media}/v4l/selections-common.rst               |    2 +-
+ .../uapi => userspace-api/media}/v4l/standard.rst  |    2 +-
+ .../media}/v4l/streaming-par.rst                   |    2 +-
+ .../media}/v4l/subdev-formats.rst                  |    2 +-
+ .../media}/v4l/subdev-image-processing-crop.svg    |    2 +-
+ .../media}/v4l/subdev-image-processing-full.svg    |    2 +-
+ ...ubdev-image-processing-scaling-multi-source.svg |    2 +-
+ .../media}/v4l/tch-formats.rst                     |    2 +-
+ .../uapi => userspace-api/media}/v4l/tuner.rst     |    2 +-
+ .../uapi => userspace-api/media}/v4l/user-func.rst |    2 +-
+ .../uapi => userspace-api/media}/v4l/userp.rst     |    2 +-
+ .../media}/v4l/v4l2-selection-flags.rst            |    2 +-
+ .../media}/v4l/v4l2-selection-targets.rst          |    2 +-
+ .../uapi => userspace-api/media}/v4l/v4l2.rst      |    2 +-
+ .../media}/v4l/v4l2grab-example.rst                |    2 +-
+ .../media}/v4l/v4l2grab.c.rst                      |    2 +-
+ .../uapi => userspace-api/media}/v4l/vbi_525.svg   |    2 +-
+ .../uapi => userspace-api/media}/v4l/vbi_625.svg   |    2 +-
+ .../uapi => userspace-api/media}/v4l/vbi_hsync.svg |    2 +-
+ .../uapi => userspace-api/media}/v4l/video.rst     |    2 +-
+ .../uapi => userspace-api/media}/v4l/videodev.rst  |    2 +-
+ .../media}/v4l/vidioc-create-bufs.rst              |    4 +-
+ .../media}/v4l/vidioc-cropcap.rst                  |    2 +-
+ .../media}/v4l/vidioc-dbg-g-chip-info.rst          |    2 +-
+ .../media}/v4l/vidioc-dbg-g-register.rst           |    2 +-
+ .../media}/v4l/vidioc-decoder-cmd.rst              |    2 +-
+ .../media}/v4l/vidioc-dqevent.rst                  |    2 +-
+ .../media}/v4l/vidioc-dv-timings-cap.rst           |    2 +-
+ .../media}/v4l/vidioc-encoder-cmd.rst              |    2 +-
+ .../media}/v4l/vidioc-enum-dv-timings.rst          |    2 +-
+ .../media}/v4l/vidioc-enum-fmt.rst                 |    2 +-
+ .../media}/v4l/vidioc-enum-frameintervals.rst      |    2 +-
+ .../media}/v4l/vidioc-enum-framesizes.rst          |    2 +-
+ .../media}/v4l/vidioc-enum-freq-bands.rst          |    2 +-
+ .../media}/v4l/vidioc-enumaudio.rst                |    2 +-
+ .../media}/v4l/vidioc-enumaudioout.rst             |    2 +-
+ .../media}/v4l/vidioc-enuminput.rst                |    2 +-
+ .../media}/v4l/vidioc-enumoutput.rst               |    2 +-
+ .../media}/v4l/vidioc-enumstd.rst                  |    2 +-
+ .../media}/v4l/vidioc-expbuf.rst                   |    2 +-
+ .../media}/v4l/vidioc-g-audio.rst                  |    2 +-
+ .../media}/v4l/vidioc-g-audioout.rst               |    2 +-
+ .../media}/v4l/vidioc-g-crop.rst                   |    2 +-
+ .../media}/v4l/vidioc-g-ctrl.rst                   |    2 +-
+ .../media}/v4l/vidioc-g-dv-timings.rst             |    2 +-
+ .../media}/v4l/vidioc-g-edid.rst                   |    2 +-
+ .../media}/v4l/vidioc-g-enc-index.rst              |    2 +-
+ .../media}/v4l/vidioc-g-ext-ctrls.rst              |    2 +-
+ .../media}/v4l/vidioc-g-fbuf.rst                   |    2 +-
+ .../media}/v4l/vidioc-g-fmt.rst                    |    2 +-
+ .../media}/v4l/vidioc-g-frequency.rst              |    2 +-
+ .../media}/v4l/vidioc-g-input.rst                  |    2 +-
+ .../media}/v4l/vidioc-g-jpegcomp.rst               |    2 +-
+ .../media}/v4l/vidioc-g-modulator.rst              |    2 +-
+ .../media}/v4l/vidioc-g-output.rst                 |    2 +-
+ .../media}/v4l/vidioc-g-parm.rst                   |    2 +-
+ .../media}/v4l/vidioc-g-priority.rst               |    2 +-
+ .../media}/v4l/vidioc-g-selection.rst              |    2 +-
+ .../media}/v4l/vidioc-g-sliced-vbi-cap.rst         |    2 +-
+ .../media}/v4l/vidioc-g-std.rst                    |    2 +-
+ .../media}/v4l/vidioc-g-tuner.rst                  |    2 +-
+ .../media}/v4l/vidioc-log-status.rst               |    2 +-
+ .../media}/v4l/vidioc-overlay.rst                  |    2 +-
+ .../media}/v4l/vidioc-prepare-buf.rst              |    2 +-
+ .../media}/v4l/vidioc-qbuf.rst                     |    2 +-
+ .../media}/v4l/vidioc-query-dv-timings.rst         |    2 +-
+ .../media}/v4l/vidioc-querybuf.rst                 |    2 +-
+ .../media}/v4l/vidioc-querycap.rst                 |    4 +-
+ .../media}/v4l/vidioc-queryctrl.rst                |    2 +-
+ .../media}/v4l/vidioc-querystd.rst                 |    2 +-
+ .../media}/v4l/vidioc-reqbufs.rst                  |    4 +-
+ .../media}/v4l/vidioc-s-hw-freq-seek.rst           |    2 +-
+ .../media}/v4l/vidioc-streamon.rst                 |    2 +-
+ .../v4l/vidioc-subdev-enum-frame-interval.rst      |    2 +-
+ .../media}/v4l/vidioc-subdev-enum-frame-size.rst   |    2 +-
+ .../media}/v4l/vidioc-subdev-enum-mbus-code.rst    |    2 +-
+ .../media}/v4l/vidioc-subdev-g-crop.rst            |    2 +-
+ .../media}/v4l/vidioc-subdev-g-fmt.rst             |    2 +-
+ .../media}/v4l/vidioc-subdev-g-frame-interval.rst  |    2 +-
+ .../media}/v4l/vidioc-subdev-g-selection.rst       |    2 +-
+ .../media}/v4l/vidioc-subscribe-event.rst          |    2 +-
+ .../media}/v4l/yuv-formats.rst                     |    2 +-
+ .../media/video.h.rst.exceptions                   |    0
+ .../media/videodev2.h.rst.exceptions               |    0
+ MAINTAINERS                                        |   73 +-
+ arch/arm/configs/exynos_defconfig                  |    2 +-
+ arch/arm/configs/multi_v7_defconfig                |    2 +-
+ drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c             |    2 +-
+ drivers/media/Kconfig                              |  242 ++--
+ drivers/media/Makefile                             |    2 +-
+ drivers/media/cec/Kconfig                          |   25 +
+ drivers/media/cec/Makefile                         |   16 +-
+ drivers/media/cec/core/Makefile                    |   16 +
+ drivers/media/cec/{ => core}/cec-adap.c            |    0
+ drivers/media/cec/{ => core}/cec-api.c             |    0
+ drivers/media/cec/{ => core}/cec-core.c            |    0
+ drivers/media/cec/{ => core}/cec-notifier.c        |    0
+ drivers/media/cec/{ => core}/cec-pin-error-inj.c   |    0
+ drivers/media/cec/{ => core}/cec-pin-priv.h        |    0
+ drivers/media/cec/{ => core}/cec-pin.c             |    0
+ drivers/media/cec/{ => core}/cec-priv.h            |    0
+ drivers/media/cec/platform/Kconfig                 |  120 ++
+ drivers/media/cec/platform/Makefile                |   14 +
+ drivers/media/{ => cec}/platform/cec-gpio/Makefile |    0
+ .../media/{ => cec}/platform/cec-gpio/cec-gpio.c   |   18 +-
+ drivers/media/cec/platform/cros-ec/Makefile        |    2 +
+ .../platform/cros-ec}/cros-ec-cec.c                |    0
+ drivers/media/cec/platform/meson/Makefile          |    3 +
+ .../media/{ => cec}/platform/meson/ao-cec-g12a.c   |    0
+ drivers/media/{ => cec}/platform/meson/ao-cec.c    |    0
+ .../s5p-cec => cec/platform/s5p}/Makefile          |    2 +-
+ .../s5p-cec => cec/platform/s5p}/exynos_hdmi_cec.h |    0
+ .../platform/s5p}/exynos_hdmi_cecctrl.c            |    0
+ .../s5p-cec => cec/platform/s5p}/regs-cec.h        |    0
+ .../s5p-cec => cec/platform/s5p}/s5p_cec.c         |    0
+ .../s5p-cec => cec/platform/s5p}/s5p_cec.h         |    0
+ drivers/media/cec/platform/seco/Makefile           |    2 +
+ .../seco-cec => cec/platform/seco}/seco-cec.c      |    2 +-
+ .../seco-cec => cec/platform/seco}/seco-cec.h      |    0
+ drivers/media/cec/platform/sti/Makefile            |    2 +
+ .../sti/cec => cec/platform/sti}/stih-cec.c        |    0
+ drivers/media/cec/platform/stm32/Makefile          |    2 +
+ drivers/media/{ => cec}/platform/stm32/stm32-cec.c |    0
+ drivers/media/cec/platform/tegra/Makefile          |    2 +
+ .../tegra-cec => cec/platform/tegra}/tegra_cec.c   |    0
+ .../tegra-cec => cec/platform/tegra}/tegra_cec.h   |    0
+ drivers/media/cec/usb/Kconfig                      |    8 +
+ drivers/media/cec/usb/Makefile                     |    6 +
+ .../{usb/pulse8-cec => cec/usb/pulse8}/Kconfig     |    3 +-
+ .../{usb/pulse8-cec => cec/usb/pulse8}/Makefile    |    0
+ .../pulse8-cec => cec/usb/pulse8}/pulse8-cec.c     |    0
+ .../rainshadow-cec => cec/usb/rainshadow}/Kconfig  |    3 +-
+ .../rainshadow-cec => cec/usb/rainshadow}/Makefile |    0
+ .../usb/rainshadow}/rainshadow-cec.c               |    0
+ drivers/media/common/Kconfig                       |    2 +-
+ drivers/media/dvb-core/Kconfig                     |   27 +
+ drivers/media/dvb-frontends/Kconfig                |   16 +-
+ drivers/media/dvb-frontends/dib3000.h              |    2 +-
+ drivers/media/dvb-frontends/dib3000mb.c            |    2 +-
+ drivers/media/dvb-frontends/eds1547.h              |    2 +-
+ drivers/media/dvb-frontends/lgdt3306a.c            |   14 +
+ drivers/media/dvb-frontends/m88ds3103.c            |    4 +-
+ drivers/media/dvb-frontends/z0194a.h               |    2 +-
+ drivers/media/firewire/Kconfig                     |    5 +-
+ drivers/media/i2c/Kconfig                          |  444 +++++---
+ drivers/media/i2c/cx25840/cx25840-core.c           |   40 +-
+ drivers/media/i2c/et8ek8/Kconfig                   |    4 +-
+ drivers/media/i2c/m5mols/Kconfig                   |    5 +-
+ drivers/media/i2c/max2175.c                        |    6 +-
+ drivers/media/i2c/ov5640.c                         |    4 +-
+ drivers/media/i2c/smiapp/Kconfig                   |    5 +-
+ drivers/media/mc/Kconfig                           |   19 +-
+ drivers/media/mmc/Kconfig                          |    1 -
+ drivers/media/mmc/siano/Kconfig                    |    2 +
+ drivers/media/pci/Kconfig                          |   14 +-
+ drivers/media/pci/bt8xx/Kconfig                    |    2 +-
+ drivers/media/pci/cobalt/Kconfig                   |    4 +-
+ drivers/media/pci/cx18/cx18-streams.c              |    4 +-
+ drivers/media/pci/cx23885/cx23885-cards.c          |   51 +-
+ drivers/media/pci/cx23885/cx23885-dvb.c            |   31 +
+ drivers/media/pci/cx23885/cx23885-video.c          |   99 +-
+ drivers/media/pci/cx88/cx88-core.c                 |    3 +-
+ drivers/media/pci/cx88/cx88-input.c                |    2 +-
+ drivers/media/pci/cx88/cx88-video.c                |    2 +-
+ drivers/media/pci/ddbridge/Kconfig                 |    1 -
+ drivers/media/pci/ddbridge/Makefile                |    2 +-
+ drivers/media/pci/ddbridge/ddbridge-core.c         |    4 +-
+ drivers/media/pci/ddbridge/ddbridge-dummy-fe.c     |  153 +++
+ drivers/media/pci/ddbridge/ddbridge-dummy-fe.h     |   16 +
+ drivers/media/pci/intel/ipu3/Kconfig               |    4 +-
+ drivers/media/pci/meye/Kconfig                     |    2 +-
+ drivers/media/pci/saa7134/saa7134-input.c          |    2 +-
+ drivers/media/pci/sta2x11/Kconfig                  |    6 +-
+ drivers/media/platform/Kconfig                     |  182 +--
+ drivers/media/platform/Makefile                    |   17 -
+ drivers/media/platform/am437x/Kconfig              |    4 +-
+ drivers/media/platform/atmel/Kconfig               |    4 +-
+ drivers/media/platform/cadence/Kconfig             |    8 +-
+ drivers/media/platform/coda/coda-bit.c             |    9 +-
+ drivers/media/platform/coda/coda-common.c          |  199 +++-
+ drivers/media/platform/coda/coda-jpeg.c            |  577 ++++++++++
+ drivers/media/platform/coda/coda.h                 |   12 +-
+ drivers/media/platform/cros-ec-cec/Makefile        |    2 -
+ drivers/media/platform/davinci/vpif_display.c      |    1 -
+ drivers/media/platform/exynos4-is/Kconfig          |    5 +-
+ drivers/media/platform/marvell-ccic/cafe-driver.c  |    2 +-
+ drivers/media/platform/meson/Makefile              |    3 -
+ drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      |    8 +-
+ drivers/media/platform/pxa_camera.c                |    4 +-
+ drivers/media/platform/qcom/venus/core.c           |   15 +-
+ drivers/media/platform/qcom/venus/core.h           |    2 +
+ drivers/media/platform/qcom/venus/vdec.c           |  134 ++-
+ drivers/media/platform/rcar-fcp.c                  |    5 +
+ drivers/media/platform/rcar-vin/Kconfig            |    8 +-
+ drivers/media/platform/seco-cec/Makefile           |    2 -
+ drivers/media/platform/sti/cec/Makefile            |    2 -
+ drivers/media/platform/stm32/Makefile              |    1 -
+ drivers/media/platform/sunxi/Kconfig               |    2 +
+ drivers/media/platform/sunxi/Makefile              |    2 +
+ drivers/media/platform/sunxi/sun4i-csi/Kconfig     |    6 +-
+ drivers/media/platform/sunxi/sun4i-csi/Makefile    |    2 +
+ drivers/media/platform/sunxi/sun6i-csi/Kconfig     |    4 +-
+ drivers/media/platform/tegra-cec/Makefile          |    2 -
+ drivers/media/platform/ti-vpe/cal.c                |  397 ++++---
+ drivers/media/platform/ti-vpe/cal_regs.h           |   21 +-
+ drivers/media/platform/xilinx/Kconfig              |    4 +-
+ drivers/media/radio/Kconfig                        |   12 +-
+ drivers/media/radio/si470x/Kconfig                 |    2 +-
+ drivers/media/radio/wl128x/Kconfig                 |    5 +-
+ drivers/media/rc/iguanair.c                        |   36 +-
+ drivers/media/rc/ir-rx51.c                         |    2 +-
+ drivers/media/rc/rc-core-priv.h                    |   22 +
+ drivers/media/spi/Kconfig                          |    8 +-
+ drivers/media/test-drivers/Kconfig                 |   26 +
+ drivers/media/test-drivers/Makefile                |    9 +
+ .../{platform => test-drivers}/vicodec/Kconfig     |    2 +
+ .../{platform => test-drivers}/vicodec/Makefile    |    0
+ .../vicodec/codec-fwht.c                           |    0
+ .../vicodec/codec-fwht.h                           |    0
+ .../vicodec/codec-v4l2-fwht.c                      |    0
+ .../vicodec/codec-v4l2-fwht.h                      |    0
+ .../vicodec/vicodec-core.c                         |   15 +-
+ drivers/media/{platform => test-drivers}/vim2m.c   |    8 -
+ .../media/{platform => test-drivers}/vimc/Kconfig  |    4 +-
+ .../media/{platform => test-drivers}/vimc/Makefile |    0
+ .../{platform => test-drivers}/vimc/vimc-capture.c |   23 +-
+ .../{platform => test-drivers}/vimc/vimc-common.c  |    0
+ .../{platform => test-drivers}/vimc/vimc-common.h  |   75 +-
+ .../{platform => test-drivers}/vimc/vimc-core.c    |   90 +-
+ .../{platform => test-drivers}/vimc/vimc-debayer.c |   17 +-
+ .../{platform => test-drivers}/vimc/vimc-scaler.c  |   17 +-
+ .../{platform => test-drivers}/vimc/vimc-sensor.c  |   17 +-
+ .../vimc/vimc-streamer.c                           |    0
+ .../vimc/vimc-streamer.h                           |    7 +-
+ .../media/{platform => test-drivers}/vivid/Kconfig |    2 +
+ .../{platform => test-drivers}/vivid/Makefile      |    0
+ .../{platform => test-drivers}/vivid/vivid-cec.c   |    0
+ .../{platform => test-drivers}/vivid/vivid-cec.h   |    0
+ .../{platform => test-drivers}/vivid/vivid-core.c  |    0
+ .../{platform => test-drivers}/vivid/vivid-core.h  |    0
+ .../{platform => test-drivers}/vivid/vivid-ctrls.c |    0
+ .../{platform => test-drivers}/vivid/vivid-ctrls.h |    0
+ .../vivid/vivid-kthread-cap.c                      |    0
+ .../vivid/vivid-kthread-cap.h                      |    0
+ .../vivid/vivid-kthread-out.c                      |    0
+ .../vivid/vivid-kthread-out.h                      |    0
+ .../vivid/vivid-kthread-touch.c                    |    0
+ .../vivid/vivid-kthread-touch.h                    |    0
+ .../vivid/vivid-meta-cap.c                         |    0
+ .../vivid/vivid-meta-cap.h                         |    0
+ .../vivid/vivid-meta-out.c                         |    0
+ .../vivid/vivid-meta-out.h                         |    0
+ .../{platform => test-drivers}/vivid/vivid-osd.c   |    0
+ .../{platform => test-drivers}/vivid/vivid-osd.h   |    0
+ .../vivid/vivid-radio-common.c                     |    0
+ .../vivid/vivid-radio-common.h                     |    0
+ .../vivid/vivid-radio-rx.c                         |    0
+ .../vivid/vivid-radio-rx.h                         |    0
+ .../vivid/vivid-radio-tx.c                         |    0
+ .../vivid/vivid-radio-tx.h                         |    0
+ .../vivid/vivid-rds-gen.c                          |    0
+ .../vivid/vivid-rds-gen.h                          |    0
+ .../vivid/vivid-sdr-cap.c                          |    0
+ .../vivid/vivid-sdr-cap.h                          |    0
+ .../vivid/vivid-touch-cap.c                        |    0
+ .../vivid/vivid-touch-cap.h                        |    0
+ .../vivid/vivid-vbi-cap.c                          |    0
+ .../vivid/vivid-vbi-cap.h                          |    0
+ .../vivid/vivid-vbi-gen.c                          |    0
+ .../vivid/vivid-vbi-gen.h                          |    0
+ .../vivid/vivid-vbi-out.c                          |    0
+ .../vivid/vivid-vbi-out.h                          |    0
+ .../vivid/vivid-vid-cap.c                          |    0
+ .../vivid/vivid-vid-cap.h                          |    0
+ .../vivid/vivid-vid-common.c                       |    0
+ .../vivid/vivid-vid-common.h                       |    0
+ .../vivid/vivid-vid-out.c                          |    0
+ .../vivid/vivid-vid-out.h                          |    0
+ drivers/media/tuners/Kconfig                       |    6 +-
+ drivers/media/tuners/si2157.c                      |  419 ++++++-
+ drivers/media/tuners/si2157_priv.h                 |    2 +
+ drivers/media/usb/Kconfig                          |   12 +-
+ drivers/media/usb/Makefile                         |    2 -
+ drivers/media/usb/cx231xx/cx231xx-avcore.c         |   35 +-
+ drivers/media/usb/cx231xx/cx231xx-input.c          |    5 +-
+ drivers/media/usb/cx231xx/cx231xx-video.c          |   85 +-
+ drivers/media/usb/dvb-usb-v2/Kconfig               |   10 +-
+ drivers/media/usb/dvb-usb-v2/ec168.c               |   25 +-
+ drivers/media/usb/dvb-usb-v2/gl861.c               |    4 +-
+ drivers/media/usb/dvb-usb-v2/lmedm04.c             |    4 +-
+ drivers/media/usb/dvb-usb-v2/lmedm04.h             |    2 +-
+ drivers/media/usb/dvb-usb-v2/mxl111sf.c            |    2 +-
+ drivers/media/usb/dvb-usb-v2/mxl111sf.h            |    2 +-
+ drivers/media/usb/dvb-usb/Kconfig                  |    3 +-
+ drivers/media/usb/dvb-usb/a800.c                   |    8 +-
+ drivers/media/usb/dvb-usb/af9005-fe.c              |    2 +-
+ drivers/media/usb/dvb-usb/af9005-remote.c          |    2 +-
+ drivers/media/usb/dvb-usb/af9005.c                 |    6 +-
+ drivers/media/usb/dvb-usb/af9005.h                 |    2 +-
+ drivers/media/usb/dvb-usb/az6027.c                 |    6 +-
+ drivers/media/usb/dvb-usb/cxusb.c                  |    6 +-
+ drivers/media/usb/dvb-usb/dib0700.h                |   31 +-
+ drivers/media/usb/dvb-usb/dib0700_core.c           |    6 +-
+ drivers/media/usb/dvb-usb/dibusb-common.c          |    2 +-
+ drivers/media/usb/dvb-usb/dibusb-mb.c              |    4 +-
+ drivers/media/usb/dvb-usb/dibusb-mc-common.c       |    2 +-
+ drivers/media/usb/dvb-usb/dibusb-mc.c              |    2 +-
+ drivers/media/usb/dvb-usb/dibusb.h                 |    2 +-
+ drivers/media/usb/dvb-usb/digitv.c                 |   31 +-
+ drivers/media/usb/dvb-usb/dtt200u-fe.c             |    2 +-
+ drivers/media/usb/dvb-usb/dtt200u.c                |    2 +-
+ drivers/media/usb/dvb-usb/dtt200u.h                |    2 +-
+ drivers/media/usb/dvb-usb/dvb-usb-common.h         |    3 +-
+ drivers/media/usb/dvb-usb/dvb-usb-firmware.c       |    3 +-
+ drivers/media/usb/dvb-usb/dvb-usb-init.c           |   10 +-
+ drivers/media/usb/dvb-usb/dvb-usb.h                |   10 +-
+ drivers/media/usb/dvb-usb/dw2102.c                 |    6 +-
+ drivers/media/usb/dvb-usb/gp8psk.c                 |    2 +-
+ drivers/media/usb/dvb-usb/gp8psk.h                 |    2 +-
+ drivers/media/usb/dvb-usb/m920x.c                  |    6 +-
+ drivers/media/usb/dvb-usb/nova-t-usb2.c            |    2 +-
+ drivers/media/usb/dvb-usb/opera1.c                 |    2 +-
+ drivers/media/usb/dvb-usb/technisat-usb2.c         |    4 +-
+ drivers/media/usb/dvb-usb/ttusb2.c                 |    9 +-
+ drivers/media/usb/dvb-usb/ttusb2.h                 |    2 +-
+ drivers/media/usb/dvb-usb/umt-010.c                |    2 +-
+ drivers/media/usb/dvb-usb/vp702x-fe.c              |    2 +-
+ drivers/media/usb/dvb-usb/vp702x.c                 |    2 +-
+ drivers/media/usb/dvb-usb/vp7045-fe.c              |    2 +-
+ drivers/media/usb/dvb-usb/vp7045.c                 |    2 +-
+ drivers/media/usb/dvb-usb/vp7045.h                 |    2 +-
+ drivers/media/usb/gspca/Kconfig                    |    2 +-
+ drivers/media/usb/gspca/mr97310a.c                 |    1 -
+ drivers/media/usb/hdpvr/hdpvr-core.c               |    4 +-
+ drivers/media/usb/hdpvr/hdpvr-i2c.c                |    2 +-
+ drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c       |    4 +-
+ drivers/media/usb/pwc/pwc-ctrl.c                   |    2 +-
+ drivers/media/usb/pwc/pwc-if.c                     |   54 +-
+ drivers/media/usb/zr364xx/Kconfig                  |    2 +-
+ drivers/media/v4l2-core/Kconfig                    |   27 +-
+ drivers/media/v4l2-core/Makefile                   |    3 +
+ drivers/media/v4l2-core/v4l2-common.c              |    3 +-
+ drivers/media/v4l2-core/v4l2-ctrls.c               |   31 +-
+ drivers/media/v4l2-core/v4l2-h264.c                |  270 +++++
+ drivers/media/v4l2-core/v4l2-ioctl.c               |    2 -
+ drivers/media/v4l2-core/v4l2-jpeg.c                |  632 +++++++++++
+ drivers/media/v4l2-core/v4l2-mem2mem.c             |   11 +-
+ drivers/staging/media/Kconfig                      |    2 +
+ drivers/staging/media/Makefile                     |    1 +
+ drivers/staging/media/hantro/Kconfig               |    6 +-
+ drivers/staging/media/hantro/Makefile              |    2 +
+ drivers/staging/media/hantro/hantro.h              |    7 +-
+ drivers/staging/media/hantro/hantro_drv.c          |   28 +-
+ drivers/staging/media/hantro/hantro_h264.c         |  237 +---
+ drivers/staging/media/hantro/hantro_hw.h           |   31 +
+ drivers/staging/media/hantro/hantro_v4l2.c         |  111 +-
+ drivers/staging/media/imx/Kconfig                  |    5 +-
+ drivers/staging/media/imx/imx-ic-prp.c             |   15 +-
+ drivers/staging/media/imx/imx-ic-prpencvf.c        |   14 +-
+ drivers/staging/media/imx/imx-media-capture.c      |   42 +-
+ drivers/staging/media/imx/imx-media-csc-scaler.c   |   13 +-
+ drivers/staging/media/imx/imx-media-csi.c          |   42 +-
+ drivers/staging/media/imx/imx-media-utils.c        |  518 ++++-----
+ drivers/staging/media/imx/imx-media-vdic.c         |   12 +-
+ drivers/staging/media/imx/imx-media.h              |   57 +-
+ drivers/staging/media/imx/imx7-media-csi.c         |   17 +-
+ drivers/staging/media/imx/imx7-mipi-csis.c         |  446 +++++---
+ drivers/staging/media/ipu3/Kconfig                 |    3 +-
+ drivers/staging/media/ipu3/TODO                    |    2 -
+ drivers/staging/media/ipu3/ipu3-css-params.c       |   14 +-
+ drivers/staging/media/ipu3/ipu3-mmu.c              |   10 +-
+ drivers/staging/media/ipu3/ipu3-v4l2.c             |   28 +-
+ drivers/staging/media/ipu3/ipu3.c                  |    3 +
+ drivers/staging/media/ipu3/ipu3.h                  |    4 +
+ drivers/staging/media/omap4iss/Kconfig             |    4 +-
+ .../staging/media/phy-rockchip-dphy-rx0/Kconfig    |    2 +-
+ drivers/staging/media/rkisp1/Kconfig               |    6 +-
+ drivers/staging/media/rkisp1/Makefile              |    2 +
+ drivers/staging/media/rkisp1/TODO                  |    6 -
+ drivers/staging/media/rkisp1/rkisp1-capture.c      |   97 +-
+ drivers/staging/media/rkisp1/rkisp1-common.h       |   16 +-
+ drivers/staging/media/rkisp1/rkisp1-dev.c          |  114 +-
+ drivers/staging/media/rkisp1/rkisp1-isp.c          |   94 +-
+ drivers/staging/media/rkisp1/rkisp1-resizer.c      |   12 +-
+ drivers/staging/media/rkvdec/Kconfig               |   16 +
+ drivers/staging/media/rkvdec/Makefile              |    3 +
+ drivers/staging/media/rkvdec/TODO                  |   11 +
+ drivers/staging/media/rkvdec/rkvdec-h264.c         | 1156 ++++++++++++++++++++
+ drivers/staging/media/rkvdec/rkvdec-regs.h         |  223 ++++
+ drivers/staging/media/rkvdec/rkvdec.c              | 1103 +++++++++++++++++++
+ drivers/staging/media/rkvdec/rkvdec.h              |  121 ++
+ .../staging/media/soc_camera}/soc-camera.rst       |    0
+ drivers/staging/media/sunxi/cedrus/Kconfig         |    5 +-
+ drivers/staging/media/usbvision/Kconfig            |    2 +-
+ include/media/cec-pin.h                            |   16 +-
+ include/media/dvb-usb-ids.h                        |    2 +-
+ include/media/h264-ctrls.h                         |    8 +-
+ include/media/rc-map.h                             |  103 +-
+ include/media/v4l2-ctrls.h                         |   53 +-
+ include/media/v4l2-fh.h                            |    2 -
+ include/media/v4l2-h264.h                          |   85 ++
+ include/media/v4l2-image-sizes.h                   |    6 +
+ include/media/v4l2-jpeg.h                          |  135 +++
+ include/uapi/linux/v4l2-controls.h                 |    5 +
+ 964 files changed, 14379 insertions(+), 5096 deletions(-)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/au0828-cardlist.rst (100%)
+ create mode 100644 Documentation/admin-guide/media/avermedia.rst
+ create mode 100644 Documentation/admin-guide/media/bt8xx.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/bttv-cardlist.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/bttv.rst (79%)
+ create mode 100644 Documentation/admin-guide/media/building.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/cafe_ccic.rst (100%)
+ create mode 100644 Documentation/admin-guide/media/cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/cec-drivers.rst
+ create mode 100644 Documentation/admin-guide/media/ci.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/cpia2.rst (66%)
+ create mode 100644 Documentation/admin-guide/media/cx18-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/cx231xx-cardlist.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/cx23885-cardlist.rst (98%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/cx88-cardlist.rst (99%)
+ create mode 100644 Documentation/admin-guide/media/cx88.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/davinci-vpbe.rst (72%)
+ create mode 100644 Documentation/admin-guide/media/dvb-drivers.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-a800-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-af9005-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-af9015-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-af9035-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-anysee-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-au6610-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-az6007-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-az6027-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-ce6230-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-cinergyT2-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-cxusb-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-dib0700-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-dibusb-mb-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-dibusb-mc-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-digitv-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-dtt200u-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-dtv5100-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-ec168-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-gl861-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-gp8psk-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-lmedm04-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-m920x-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-mxl111sf-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-nova-t-usb2-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-opera1-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-pctv452e-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-rtl28xxu-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-technisat-usb2-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-ttusb2-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-umt-010-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-vp702x-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-vp7045-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb-usb-zd1301-cardlist.rst
+ create mode 100644 Documentation/admin-guide/media/dvb.rst
+ create mode 100644 Documentation/admin-guide/media/dvb_intro.rst
+ create mode 100644 Documentation/admin-guide/media/dvb_references.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/em28xx-cardlist.rst (97%)
+ create mode 100644 Documentation/admin-guide/media/faq.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/fimc.rst (91%)
+ create mode 100644 Documentation/admin-guide/media/frontend-cardlist.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/gspca-cardlist.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/imx.rst (83%)
+ create mode 100644 Documentation/admin-guide/media/imx6q-sabreauto.dot
+ create mode 100644 Documentation/admin-guide/media/imx6q-sabresd.dot
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/imx7.rst (100%)
+ create mode 100644 Documentation/admin-guide/media/index.rst
+ create mode 100644 Documentation/admin-guide/media/intro.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/ipu3.rst (95%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/ipu3_rcb.svg (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/ivtv-cardlist.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/ivtv.rst (100%)
+ rename Documentation/{media/dvb-drivers => admin-guide/media}/lmedm04.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/meye.rst (63%)
+ create mode 100644 Documentation/admin-guide/media/omap3isp.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/omap4_camera.rst (100%)
+ rename Documentation/{media/dvb-drivers => admin-guide/media}/opera-firmware.rst (100%)
+ create mode 100644 Documentation/admin-guide/media/other-usb-cardlist.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/philips.rst (100%)
+ rename Documentation/{media/cec-drivers => admin-guide/media}/pulse8-cec.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/qcom_camss.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/qcom_camss_8x96_graph.dot (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/qcom_camss_graph.dot (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/rcar-fdp1.rst (100%)
+ rename Documentation/{media/v4l-drivers/v4l-with-ir.rst => admin-guide/media/remote-controller.rst} (96%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/saa7134-cardlist.rst (100%)
+ create mode 100644 Documentation/admin-guide/media/saa7134.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/saa7164-cardlist.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/si470x.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/si4713.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/si476x.rst (100%)
+ create mode 100644 Documentation/admin-guide/media/siano-cardlist.rst
+ rename Documentation/{media/dvb-drivers => admin-guide/media}/technisat.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/tm6000-cardlist.rst (100%)
+ rename Documentation/{media/dvb-drivers => admin-guide/media}/ttusb-dec.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/tuner-cardlist.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/usbvision-cardlist.rst (100%)
+ create mode 100644 Documentation/admin-guide/media/v4l-drivers.rst
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/vimc.dot (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/vimc.rst (92%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/vivid.rst (100%)
+ rename Documentation/{media/v4l-drivers => admin-guide/media}/zr364xx.rst (77%)
+ create mode 100644 Documentation/devicetree/bindings/media/rockchip,vdec.yaml
+ delete mode 100644 Documentation/devicetree/bindings/media/rockchip-rga.txt
+ create mode 100644 Documentation/devicetree/bindings/media/rockchip-rga.yaml
+ delete mode 100644 Documentation/devicetree/bindings/media/rockchip-vpu.txt
+ create mode 100644 Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+ rename Documentation/{media/kapi => driver-api/media}/cec-core.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/csi2.rst (100%)
+ create mode 100644 Documentation/driver-api/media/drivers/bttv-devel.rst
+ rename Documentation/{media/dvb-drivers => driver-api/media/drivers}/contributors.rst (100%)
+ create mode 100644 Documentation/driver-api/media/drivers/cpia2_devel.rst
+ rename Documentation/{media/v4l-drivers/cx2341x.rst => driver-api/media/drivers/cx2341x-devel.rst} (91%)
+ rename Documentation/{media/v4l-drivers/cx88.rst => driver-api/media/drivers/cx88-devel.rst} (66%)
+ create mode 100644 Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst
+ rename Documentation/{media/dvb-drivers => driver-api/media/drivers}/dvb-usb.rst (100%)
+ create mode 100644 Documentation/driver-api/media/drivers/fimc-devel.rst
+ rename Documentation/{media/dvb-drivers => driver-api/media/drivers}/frontends.rst (100%)
+ create mode 100644 Documentation/driver-api/media/drivers/index.rst
+ rename Documentation/{media/v4l-drivers => driver-api/media/drivers}/pvrusb2.rst (100%)
+ rename Documentation/{media/v4l-drivers => driver-api/media/drivers}/pxa_camera.rst (100%)
+ rename Documentation/{media/v4l-drivers => driver-api/media/drivers}/radiotrack.rst (100%)
+ rename Documentation/{media/v4l-drivers/saa7134.rst => driver-api/media/drivers/saa7134-devel.rst} (56%)
+ rename Documentation/{media/v4l-drivers => driver-api/media/drivers}/sh_mobile_ceu_camera.rst (100%)
+ rename Documentation/{media/v4l-drivers => driver-api/media/drivers}/tuners.rst (100%)
+ create mode 100644 Documentation/driver-api/media/drivers/vimc-devel.rst
+ rename Documentation/{media/kapi => driver-api/media}/dtv-ca.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/dtv-common.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/dtv-core.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/dtv-demux.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/dtv-frontend.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/dtv-net.rst (100%)
+ create mode 100644 Documentation/driver-api/media/index.rst
+ rename Documentation/{media/kapi => driver-api/media}/mc-core.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/rc-core.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-async.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-clocks.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-common.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-controls.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-core.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-dev.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-device.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-dv-timings.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-event.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-fh.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-flash-led-class.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-fwnode.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-intro.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-mc.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-mediabus.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-mem2mem.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-rect.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-subdev.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-tuner.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-tveeprom.rst (100%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-videobuf.rst (98%)
+ rename Documentation/{media/kapi => driver-api/media}/v4l2-videobuf2.rst (100%)
+ delete mode 100644 Documentation/media/.gitignore
+ delete mode 100644 Documentation/media/cec-drivers/index.rst
+ delete mode 100644 Documentation/media/dvb-drivers/avermedia.rst
+ delete mode 100644 Documentation/media/dvb-drivers/bt8xx.rst
+ delete mode 100644 Documentation/media/dvb-drivers/cards.rst
+ delete mode 100644 Documentation/media/dvb-drivers/faq.rst
+ delete mode 100644 Documentation/media/dvb-drivers/index.rst
+ delete mode 100644 Documentation/media/dvb-drivers/intro.rst
+ delete mode 100644 Documentation/media/dvb-drivers/udev.rst
+ delete mode 100644 Documentation/media/index.rst
+ delete mode 100644 Documentation/media/media_kapi.rst
+ delete mode 100644 Documentation/media/media_uapi.rst
+ delete mode 100644 Documentation/media/v4l-drivers/cardlist.rst
+ rename Documentation/{ => userspace-api}/media/Makefile (97%)
+ rename Documentation/{ => userspace-api}/media/audio.h.rst.exceptions (100%)
+ rename Documentation/{ => userspace-api}/media/ca.h.rst.exceptions (100%)
+ rename Documentation/{ => userspace-api}/media/cec.h.rst.exceptions (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-api.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-func-close.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-func-ioctl.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-func-open.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-func-poll.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-funcs.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-header.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-intro.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-ioc-adap-g-caps.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-ioc-adap-g-conn-info.rst (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-ioc-adap-g-log-addrs.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-ioc-adap-g-phys-addr.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-ioc-dqevent.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-ioc-g-mode.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-ioc-receive.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/cec/cec-pin-error-inj.rst (99%)
+ rename Documentation/{ => userspace-api}/media/conf_nitpick.py (100%)
+ rename Documentation/{ => userspace-api}/media/dmx.h.rst.exceptions (100%)
+ create mode 100644 Documentation/userspace-api/media/drivers/cx2341x-uapi.rst
+ create mode 100644 Documentation/userspace-api/media/drivers/imx-uapi.rst
+ rename Documentation/{media/v4l-drivers => userspace-api/media/drivers}/index.rst (73%)
+ rename Documentation/{media/v4l-drivers => userspace-api/media/drivers}/max2175.rst (96%)
+ create mode 100644 Documentation/userspace-api/media/drivers/meye-uapi.rst
+ rename Documentation/{media/v4l-drivers/omap3isp.rst => userspace-api/media/drivers/omap3isp-uapi.rst} (77%)
+ rename Documentation/{media/v4l-drivers => userspace-api/media/drivers}/uvcvideo.rst (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-bilingual-channel-select.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-channel-select.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-clear-buffer.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-continue.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-fclose.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-fopen.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-fwrite.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-get-capabilities.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-get-status.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-pause.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-play.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-select-source.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-set-av-sync.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-set-bypass-mode.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-set-id.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-set-mixer.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-set-mute.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-set-streamtype.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio-stop.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio_data_types.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/audio_function_calls.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca-fclose.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca-fopen.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca-get-cap.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca-get-descr-info.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca-get-msg.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca-get-slot-info.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca-reset.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca-send-msg.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca-set-descr.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca.rst (92%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca_data_types.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/ca_function_calls.rst (92%)
+ rename Documentation/{media/dvb-drivers/ci.rst => userspace-api/media/dvb/ca_high_level.rst} (68%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/demux.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-add-pid.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-expbuf.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-fclose.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-fopen.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-fread.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-fwrite.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-get-pes-pids.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-get-stc.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-mmap.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-munmap.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-qbuf.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-querybuf.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-remove-pid.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-reqbufs.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-set-buffer-size.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-set-filter.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-set-pes-filter.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-start.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx-stop.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx_fcalls.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dmx_types.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dvb-fe-read-status.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dvb-frontend-event.rst (91%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dvb-frontend-parameters.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dvbapi.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dvbproperty.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/dvbstb.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/examples.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-bandwidth-t.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-diseqc-recv-slave-reply.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-diseqc-reset-overload.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-diseqc-send-burst.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-diseqc-send-master-cmd.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-dishnetwork-send-legacy-cmd.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-enable-high-lnb-voltage.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-get-event.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-get-frontend.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-get-info.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-get-property.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-read-ber.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-read-signal-strength.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-read-snr.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-read-status.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-read-uncorrected-blocks.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-set-frontend-tune-mode.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-set-frontend.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-set-tone.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-set-voltage.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe-type-t.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/fe_property_parameters.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend-header.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend-property-cable-systems.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend-property-satellite-systems.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend-property-terrestrial-systems.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend-stat-properties.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend_f_close.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend_f_open.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend_fcalls.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend_legacy_api.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/frontend_legacy_dvbv3_api.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/headers.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/intro.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/legacy_dvb_apis.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/net-add-if.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/net-get-if.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/net-remove-if.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/net-types.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/net.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/query-dvb-frontend-info.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-clear-buffer.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-command.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-continue.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-fast-forward.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-fclose.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-fopen.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-freeze.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-fwrite.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-get-capabilities.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-get-event.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-get-frame-count.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-get-pts.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-get-size.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-get-status.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-play.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-select-source.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-set-blank.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-set-display-format.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-set-format.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-set-streamtype.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-slowmotion.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-stillpicture.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-stop.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video-try-command.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video_function_calls.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/dvb/video_types.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/fdl-appendix.rst (99%)
+ rename Documentation/{ => userspace-api}/media/frontend.h.rst.exceptions (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/gen-errors.rst (98%)
+ create mode 100644 Documentation/userspace-api/media/index.rst
+ rename Documentation/{ => userspace-api}/media/intro.rst (100%)
+ rename Documentation/{ => userspace-api}/media/lirc.h.rst.exceptions (100%)
+ rename Documentation/{ => userspace-api}/media/media.h.rst.exceptions (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-controller-intro.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-controller-model.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-controller.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-func-close.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-func-ioctl.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-func-open.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-funcs.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-header.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-ioc-device-info.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-ioc-enum-entities.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-ioc-enum-links.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-ioc-g-topology.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-ioc-request-alloc.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-ioc-setup-link.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-request-ioc-queue.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-request-ioc-reinit.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/media-types.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/request-api.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/request-func-close.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/request-func-ioctl.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/mediactl/request-func-poll.rst (98%)
+ rename Documentation/{ => userspace-api}/media/net.h.rst.exceptions (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/keytable.c.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-dev-intro.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-dev.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-func.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-get-features.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-get-rec-mode.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-get-rec-resolution.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-get-send-mode.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-get-timeout.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-header.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-read.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-set-measure-carrier-mode.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-set-rec-carrier-range.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-set-rec-carrier.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-set-rec-timeout-reports.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-set-rec-timeout.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-set-send-carrier.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-set-send-duty-cycle.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-set-transmitter-mask.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-set-wideband-receiver.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/lirc-write.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/rc-intro.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/rc-protos.rst (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/rc-sysfs-nodes.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/rc-table-change.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/rc-tables.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/rc/remote_controllers.rst (95%)
+ rename Documentation/{ => userspace-api}/media/typical_media_device.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/app-pri.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/async.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/audio.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/bayer.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/biblio.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/buffer.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/capture-example.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/capture.c.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/colorspaces-defs.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/colorspaces-details.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/colorspaces.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/common-defs.rst (92%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/common.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/compat.rst (92%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/constraints.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/control.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/crop.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/crop.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/depth-formats.rst (91%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-capture.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-decoder.rst (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-event.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-mem2mem.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-meta.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-osd.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-output.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-overlay.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-radio.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-raw-vbi.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-rds.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-sdr.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-sliced-vbi.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-stateless-decoder.rst (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-subdev.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dev-touch.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/devices.rst (92%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/diff-v4l.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dmabuf.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/dv-timings.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-camera.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-codec.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-detect.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-dv.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-flash.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-fm-rx.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-fm-tx.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-image-process.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-image-source.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-jpeg.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/ext-ctrls-rf-tuner.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/extended-controls.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/field-order.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/fieldseq_bt.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/fieldseq_tb.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/format.rst (98%)
+ rename Documentation/{media/v4l-drivers => userspace-api/media/v4l}/fourcc.rst (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/func-close.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/func-ioctl.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/func-mmap.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/func-munmap.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/func-open.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/func-poll.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/func-read.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/func-select.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/func-write.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/hist-v4l2.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/hsv-formats.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/io.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/libv4l-introduction.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/libv4l.rst (90%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/meta-formats.rst (92%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/mmap.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/nv12mt.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/nv12mt_example.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/open.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pipeline.dot (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-bayer.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-cnf4.rst (100%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-compressed.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-grey.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-indexed.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-intro.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-inzi.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-m420.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-meta-d4xx.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-meta-intel-ipu3.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-meta-uvc.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-meta-vivid.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-meta-vsp1-hgo.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-meta-vsp1-hgt.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-nv12.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-nv12m.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-nv12mt.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-nv16.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-nv16m.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-nv24.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-packed-hsv.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-packed-yuv.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-reserved.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-rgb.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-sdr-cs08.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-sdr-cs14le.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-sdr-cu08.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-sdr-cu16le.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-sdr-pcu16be.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-sdr-pcu18be.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-sdr-pcu20be.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-sdr-ru12le.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb10-ipu3.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb10.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb10alaw8.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb10dpcm8.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb10p.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb12.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb12p.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb14.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb14p.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb16.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-srggb8.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-tch-td08.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-tch-td16.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-tch-tu08.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-tch-tu16.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-uv8.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-uyvy.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-v4l2-mplane.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-v4l2.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-vyuy.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y10.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y10b.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y10p.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y12.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y12i.rst (95%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y14.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y16-be.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y16.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y41p.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-y8i.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-yuv410.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-yuv411p.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-yuv420.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-yuv420m.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-yuv422m.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-yuv422p.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-yuv444m.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-yuyv.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-yvyu.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt-z16.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/pixfmt.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/planar-apis.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/querycap.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/rw.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/sdr-formats.rst (92%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/selection-api-configuration.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/selection-api-examples.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/selection-api-intro.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/selection-api-targets.rst (92%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/selection-api-vs-crop-api.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/selection-api.rst (92%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/selection.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/selections-common.rst (94%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/standard.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/streaming-par.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/subdev-formats.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/subdev-image-processing-crop.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/subdev-image-processing-full.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/subdev-image-processing-scaling-multi-source.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/tch-formats.rst (91%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/tuner.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/user-func.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/userp.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/v4l2-selection-flags.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/v4l2-selection-targets.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/v4l2.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/v4l2grab-example.rst (93%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/v4l2grab.c.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vbi_525.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vbi_625.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vbi_hsync.svg (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/video.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/videodev.rst (91%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-create-bufs.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-cropcap.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-dbg-g-chip-info.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-dbg-g-register.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-decoder-cmd.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-dqevent.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-dv-timings-cap.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-encoder-cmd.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enum-dv-timings.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enum-fmt.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enum-frameintervals.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enum-framesizes.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enum-freq-bands.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enumaudio.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enumaudioout.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enuminput.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enumoutput.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-enumstd.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-expbuf.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-audio.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-audioout.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-crop.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-ctrl.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-dv-timings.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-edid.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-enc-index.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-ext-ctrls.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-fbuf.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-fmt.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-frequency.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-input.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-jpegcomp.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-modulator.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-output.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-parm.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-priority.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-selection.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-sliced-vbi-cap.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-std.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-g-tuner.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-log-status.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-overlay.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-prepare-buf.rst (96%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-qbuf.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-query-dv-timings.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-querybuf.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-querycap.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-queryctrl.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-querystd.rst (97%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-reqbufs.rst (99%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-s-hw-freq-seek.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-streamon.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-subdev-enum-frame-interval.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-subdev-enum-frame-size.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-subdev-enum-mbus-code.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-subdev-g-crop.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-subdev-g-fmt.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-subdev-g-frame-interval.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-subdev-g-selection.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/vidioc-subscribe-event.rst (98%)
+ rename Documentation/{media/uapi => userspace-api/media}/v4l/yuv-formats.rst (97%)
+ rename Documentation/{ => userspace-api}/media/video.h.rst.exceptions (100%)
+ rename Documentation/{ => userspace-api}/media/videodev2.h.rst.exceptions (100%)
+ create mode 100644 drivers/media/cec/core/Makefile
+ rename drivers/media/cec/{ => core}/cec-adap.c (100%)
+ rename drivers/media/cec/{ => core}/cec-api.c (100%)
+ rename drivers/media/cec/{ => core}/cec-core.c (100%)
+ rename drivers/media/cec/{ => core}/cec-notifier.c (100%)
+ rename drivers/media/cec/{ => core}/cec-pin-error-inj.c (100%)
+ rename drivers/media/cec/{ => core}/cec-pin-priv.h (100%)
+ rename drivers/media/cec/{ => core}/cec-pin.c (100%)
+ rename drivers/media/cec/{ => core}/cec-priv.h (100%)
+ create mode 100644 drivers/media/cec/platform/Kconfig
+ create mode 100644 drivers/media/cec/platform/Makefile
+ rename drivers/media/{ => cec}/platform/cec-gpio/Makefile (100%)
+ rename drivers/media/{ => cec}/platform/cec-gpio/cec-gpio.c (94%)
+ create mode 100644 drivers/media/cec/platform/cros-ec/Makefile
+ rename drivers/media/{platform/cros-ec-cec => cec/platform/cros-ec}/cros-ec-cec.c (100%)
+ create mode 100644 drivers/media/cec/platform/meson/Makefile
+ rename drivers/media/{ => cec}/platform/meson/ao-cec-g12a.c (100%)
+ rename drivers/media/{ => cec}/platform/meson/ao-cec.c (100%)
+ rename drivers/media/{platform/s5p-cec => cec/platform/s5p}/Makefile (63%)
+ rename drivers/media/{platform/s5p-cec => cec/platform/s5p}/exynos_hdmi_cec.h (100%)
+ rename drivers/media/{platform/s5p-cec => cec/platform/s5p}/exynos_hdmi_cecctrl.c (100%)
+ rename drivers/media/{platform/s5p-cec => cec/platform/s5p}/regs-cec.h (100%)
+ rename drivers/media/{platform/s5p-cec => cec/platform/s5p}/s5p_cec.c (100%)
+ rename drivers/media/{platform/s5p-cec => cec/platform/s5p}/s5p_cec.h (100%)
+ create mode 100644 drivers/media/cec/platform/seco/Makefile
+ rename drivers/media/{platform/seco-cec => cec/platform/seco}/seco-cec.c (99%)
+ rename drivers/media/{platform/seco-cec => cec/platform/seco}/seco-cec.h (100%)
+ create mode 100644 drivers/media/cec/platform/sti/Makefile
+ rename drivers/media/{platform/sti/cec => cec/platform/sti}/stih-cec.c (100%)
+ create mode 100644 drivers/media/cec/platform/stm32/Makefile
+ rename drivers/media/{ => cec}/platform/stm32/stm32-cec.c (100%)
+ create mode 100644 drivers/media/cec/platform/tegra/Makefile
+ rename drivers/media/{platform/tegra-cec => cec/platform/tegra}/tegra_cec.c (100%)
+ rename drivers/media/{platform/tegra-cec => cec/platform/tegra}/tegra_cec.h (100%)
+ create mode 100644 drivers/media/cec/usb/Kconfig
+ create mode 100644 drivers/media/cec/usb/Makefile
+ rename drivers/media/{usb/pulse8-cec => cec/usb/pulse8}/Kconfig (91%)
+ rename drivers/media/{usb/pulse8-cec => cec/usb/pulse8}/Makefile (100%)
+ rename drivers/media/{usb/pulse8-cec => cec/usb/pulse8}/pulse8-cec.c (100%)
+ rename drivers/media/{usb/rainshadow-cec => cec/usb/rainshadow}/Kconfig (92%)
+ rename drivers/media/{usb/rainshadow-cec => cec/usb/rainshadow}/Makefile (100%)
+ rename drivers/media/{usb/rainshadow-cec => cec/usb/rainshadow}/rainshadow-cec.c (100%)
+ create mode 100644 drivers/media/pci/ddbridge/ddbridge-dummy-fe.c
+ create mode 100644 drivers/media/pci/ddbridge/ddbridge-dummy-fe.h
+ delete mode 100644 drivers/media/platform/cros-ec-cec/Makefile
+ delete mode 100644 drivers/media/platform/meson/Makefile
+ delete mode 100644 drivers/media/platform/seco-cec/Makefile
+ delete mode 100644 drivers/media/platform/sti/cec/Makefile
+ delete mode 100644 drivers/media/platform/tegra-cec/Makefile
+ create mode 100644 drivers/media/test-drivers/Kconfig
+ create mode 100644 drivers/media/test-drivers/Makefile
+ rename drivers/media/{platform => test-drivers}/vicodec/Kconfig (85%)
+ rename drivers/media/{platform => test-drivers}/vicodec/Makefile (100%)
+ rename drivers/media/{platform => test-drivers}/vicodec/codec-fwht.c (100%)
+ rename drivers/media/{platform => test-drivers}/vicodec/codec-fwht.h (100%)
+ rename drivers/media/{platform => test-drivers}/vicodec/codec-v4l2-fwht.c (100%)
+ rename drivers/media/{platform => test-drivers}/vicodec/codec-v4l2-fwht.h (100%)
+ rename drivers/media/{platform => test-drivers}/vicodec/vicodec-core.c (99%)
+ rename drivers/media/{platform => test-drivers}/vim2m.c (99%)
+ rename drivers/media/{platform => test-drivers}/vimc/Kconfig (83%)
+ rename drivers/media/{platform => test-drivers}/vimc/Makefile (100%)
+ rename drivers/media/{platform => test-drivers}/vimc/vimc-capture.c (95%)
+ rename drivers/media/{platform => test-drivers}/vimc/vimc-common.c (100%)
+ rename drivers/media/{platform => test-drivers}/vimc/vimc-common.h (79%)
+ rename drivers/media/{platform => test-drivers}/vimc/vimc-core.c (87%)
+ rename drivers/media/{platform => test-drivers}/vimc/vimc-debayer.c (97%)
+ rename drivers/media/{platform => test-drivers}/vimc/vimc-scaler.c (97%)
+ rename drivers/media/{platform => test-drivers}/vimc/vimc-sensor.c (96%)
+ rename drivers/media/{platform => test-drivers}/vimc/vimc-streamer.c (100%)
+ rename drivers/media/{platform => test-drivers}/vimc/vimc-streamer.h (85%)
+ rename drivers/media/{platform => test-drivers}/vivid/Kconfig (95%)
+ rename drivers/media/{platform => test-drivers}/vivid/Makefile (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-cec.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-cec.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-core.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-core.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-ctrls.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-ctrls.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-kthread-cap.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-kthread-cap.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-kthread-out.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-kthread-out.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-kthread-touch.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-kthread-touch.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-meta-cap.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-meta-cap.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-meta-out.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-meta-out.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-osd.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-osd.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-radio-common.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-radio-common.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-radio-rx.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-radio-rx.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-radio-tx.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-radio-tx.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-rds-gen.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-rds-gen.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-sdr-cap.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-sdr-cap.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-touch-cap.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-touch-cap.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vbi-cap.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vbi-cap.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vbi-gen.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vbi-gen.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vbi-out.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vbi-out.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vid-cap.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vid-cap.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vid-common.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vid-common.h (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vid-out.c (100%)
+ rename drivers/media/{platform => test-drivers}/vivid/vivid-vid-out.h (100%)
+ create mode 100644 drivers/media/v4l2-core/v4l2-h264.c
+ create mode 100644 drivers/media/v4l2-core/v4l2-jpeg.c
+ create mode 100644 drivers/staging/media/rkvdec/Kconfig
+ create mode 100644 drivers/staging/media/rkvdec/Makefile
+ create mode 100644 drivers/staging/media/rkvdec/TODO
+ create mode 100644 drivers/staging/media/rkvdec/rkvdec-h264.c
+ create mode 100644 drivers/staging/media/rkvdec/rkvdec-regs.h
+ create mode 100644 drivers/staging/media/rkvdec/rkvdec.c
+ create mode 100644 drivers/staging/media/rkvdec/rkvdec.h
+ rename {Documentation/media/v4l-drivers => drivers/staging/media/soc_camera}/soc-camera.rst (100%)
+ create mode 100644 include/media/v4l2-h264.h
+ create mode 100644 include/media/v4l2-jpeg.h
+Merging v4l-dvb-next/master (54ecb8f7028c Linux 5.4-rc1)
+$ git merge v4l-dvb-next/master
+Already up to date.
+Merging fbdev/fbdev-for-next (732146a3f1dc video: fbdev: imxfb: fix a typo in imxfb_probe())
+$ git merge fbdev/fbdev-for-next
+Already up to date.
+Merging pm/linux-next (d38f9bc9261a Merge branch 'pm-acpi' into linux-next)
+$ git merge pm/linux-next
+Merge made by the 'recursive' strategy.
+ Documentation/admin-guide/pm/intel_pstate.rst |  32 ++-
+ Documentation/driver-api/pm/devices.rst       | 199 +++++++++------
+ Documentation/power/pci.rst                   |  58 +++--
+ drivers/acpi/acpi_lpss.c                      |  14 +-
+ drivers/acpi/acpi_tad.c                       |   2 +-
+ drivers/acpi/cppc_acpi.c                      |   4 +-
+ drivers/acpi/device_pm.c                      |  35 ++-
+ drivers/acpi/processor_idle.c                 |   9 +-
+ drivers/base/power/main.c                     | 348 ++++++++------------------
+ drivers/cpufreq/intel_pstate.c                |   5 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c       |   2 +-
+ drivers/gpu/drm/i915/intel_runtime_pm.c       |   2 +-
+ drivers/gpu/drm/radeon/radeon_kms.c           |   2 +-
+ drivers/i2c/busses/i2c-designware-platdrv.c   |   4 +-
+ drivers/misc/mei/pci-me.c                     |   2 +-
+ drivers/misc/mei/pci-txe.c                    |   2 +-
+ drivers/net/ethernet/intel/e1000e/netdev.c    |   2 +-
+ drivers/net/ethernet/intel/igb/igb_main.c     |   2 +-
+ drivers/net/ethernet/intel/igc/igc_main.c     |   2 +-
+ drivers/pci/hotplug/pciehp_core.c             |   2 +-
+ drivers/pci/pci-driver.c                      |  34 +--
+ drivers/pci/pcie/portdrv_pci.c                |   2 +-
+ include/linux/pm.h                            |  34 +--
+ kernel/power/hibernate.c                      |   7 +
+ 24 files changed, 361 insertions(+), 444 deletions(-)
+Merging cpufreq-arm/cpufreq/arm/linux-next (7c2553f0db61 cpufreq: imx-cpufreq-dt: support i.MX7ULP)
+$ git merge cpufreq-arm/cpufreq/arm/linux-next
+Merge made by the 'recursive' strategy.
+ drivers/cpufreq/Kconfig.arm          |  1 +
+ drivers/cpufreq/cpufreq-dt-platdev.c |  2 +
+ drivers/cpufreq/imx-cpufreq-dt.c     | 84 +++++++++++++++++++++++++++++++++++-
+ 3 files changed, 85 insertions(+), 2 deletions(-)
+Merging cpupower/cpupower (8f3d9f354286 Linux 5.7-rc1)
+$ git merge cpupower/cpupower
+Already up to date.
+Merging opp/opp/linux-next (aca48b61f963 opp: Manage empty OPP tables with clk handle)
+$ git merge opp/opp/linux-next
+Already up to date.
+Merging thermal/thermal/linux-next (79799562bf08 thermal: int3400_thermal: Statically initialize .get_mode()/.set_mode() ops)
+$ git merge thermal/thermal/linux-next
+Merge made by the 'recursive' strategy.
+ .../bindings/thermal/ti,am654-thermal.yaml         |  56 +++++
+ drivers/thermal/Kconfig                            |  10 +
+ drivers/thermal/Makefile                           |   1 +
+ drivers/thermal/devfreq_cooling.c                  |  70 ++----
+ drivers/thermal/imx_sc_thermal.c                   |   4 +
+ .../intel/int340x_thermal/int3400_thermal.c        |   5 +-
+ drivers/thermal/k3_bandgap.c                       | 264 +++++++++++++++++++++
+ drivers/thermal/rockchip_thermal.c                 |   4 +-
+ drivers/thermal/st/st_thermal_memmap.c             |   4 +-
+ drivers/thermal/st/stm_thermal.c                   |   4 +-
+ drivers/thermal/thermal_core.c                     |   6 -
+ drivers/thermal/thermal_core.h                     |  52 ++++
+ drivers/thermal/thermal_helpers.c                  |  13 +-
+ drivers/thermal/ti-soc-thermal/ti-bandgap.c        |   5 +-
+ include/linux/thermal.h                            |  84 +------
+ 15 files changed, 432 insertions(+), 150 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
+ create mode 100644 drivers/thermal/k3_bandgap.c
+Merging thermal-rzhang/next (54ecb8f7028c Linux 5.4-rc1)
+$ git merge thermal-rzhang/next
+Already up to date.
+Merging thermal-soc/next (6c375eccded4 thermal: db8500: Rewrite to be a pure OF sensor)
+$ git merge thermal-soc/next
+Already up to date.
+Merging ieee1394/for-next (67f8e65e4fc1 firewire: net: remove set but not used variable 'guid')
+$ git merge ieee1394/for-next
+Auto-merging drivers/firewire/net.c
+Merge made by the 'recursive' strategy.
+ drivers/firewire/net.c | 2 --
+ 1 file changed, 2 deletions(-)
+Merging dlm/next (a48f9721e6db dlm: no need to check return value of debugfs_create functions)
+$ git merge dlm/next
+Already up to date.
+Merging swiotlb/linux-next (4cdfb27ba80d xen/swiotlb: remember having called xen_create_contiguous_region())
+$ git merge swiotlb/linux-next
+Auto-merging include/linux/page-flags.h
+Auto-merging drivers/xen/swiotlb-xen.c
+Merge made by the 'recursive' strategy.
+Merging rdma/for-next (a97bf49f824e RDMA/hns: Simplify the status judgment code of hns_roce_v1_m_qp())
+$ git merge rdma/for-next
+Auto-merging drivers/infiniband/core/uverbs_main.c
+Merge made by the 'recursive' strategy.
+ drivers/infiniband/core/cma.c               |   9 +-
+ drivers/infiniband/core/rw.c                |   2 +-
+ drivers/infiniband/core/sa_query.c          |  15 +-
+ drivers/infiniband/core/uverbs_main.c       |   2 +
+ drivers/infiniband/core/verbs.c             |   7 +-
+ drivers/infiniband/hw/bnxt_re/ib_verbs.c    |  65 ++--
+ drivers/infiniband/hw/bnxt_re/ib_verbs.h    |  10 +
+ drivers/infiniband/hw/bnxt_re/qplib_fp.c    | 357 ++++++++----------
+ drivers/infiniband/hw/bnxt_re/qplib_fp.h    |  42 +--
+ drivers/infiniband/hw/bnxt_re/qplib_rcfw.c  |  88 ++---
+ drivers/infiniband/hw/bnxt_re/qplib_rcfw.h  |  91 -----
+ drivers/infiniband/hw/bnxt_re/qplib_res.c   |   1 +
+ drivers/infiniband/hw/bnxt_re/qplib_res.h   |  53 +++
+ drivers/infiniband/hw/bnxt_re/roce_hsi.h    | 106 ++++++
+ drivers/infiniband/hw/hns/hns_roce_alloc.c  | 103 +++---
+ drivers/infiniband/hw/hns/hns_roce_cq.c     | 351 ++++++------------
+ drivers/infiniband/hw/hns/hns_roce_device.h | 100 +++--
+ drivers/infiniband/hw/hns/hns_roce_hem.c    |   9 +-
+ drivers/infiniband/hw/hns/hns_roce_hem.h    |   5 +-
+ drivers/infiniband/hw/hns/hns_roce_hw_v1.c  | 135 ++++---
+ drivers/infiniband/hw/hns/hns_roce_hw_v2.c  | 544 +++++++++++-----------------
+ drivers/infiniband/hw/hns/hns_roce_mr.c     | 431 ++++++++++++++++++++--
+ drivers/infiniband/hw/hns/hns_roce_qp.c     | 182 +++-------
+ drivers/infiniband/hw/hns/hns_roce_srq.c    | 368 +++++++------------
+ drivers/infiniband/hw/mlx5/srq.c            |  10 +-
+ drivers/infiniband/hw/qib/qib_iba7322.c     |   7 +-
+ drivers/infiniband/sw/rxe/rxe.c             |   1 +
+ drivers/infiniband/sw/rxe/rxe_param.h       |   3 +
+ drivers/infiniband/ulp/srpt/ib_srpt.c       |   7 +-
+ include/rdma/rdma_cm.h                      |   8 -
+ net/smc/smc_ib.c                            |   3 +-
+ 31 files changed, 1537 insertions(+), 1578 deletions(-)
+Merging net-next/master (323e395f197f Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next)
+$ git merge net-next/master
+Auto-merging scripts/mod/modpost.c
+Auto-merging net/smc/smc_ib.c
+Auto-merging net/mptcp/subflow.c
+Auto-merging net/batman-adv/bat_v_ogm.c
+Auto-merging include/net/bluetooth/mgmt.h
+Auto-merging drivers/net/phy/marvell10g.c
+Auto-merging drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
+Auto-merging drivers/net/ethernet/intel/igc/igc_main.c
+Auto-merging drivers/net/ethernet/intel/e1000e/netdev.c
+Auto-merging MAINTAINERS
+Removing Documentation/networking/cops.txt
+Removing Documentation/networking/caif/spi_porting.txt
+Removing Documentation/devicetree/bindings/net/qca,ar71xx.txt
+Auto-merging Documentation/admin-guide/kernel-parameters.txt
+Merge made by the 'recursive' strategy.
+ Documentation/ABI/testing/sysfs-class-net          |   13 +
+ Documentation/admin-guide/kernel-parameters.txt    |   10 +-
+ Documentation/admin-guide/sysctl/net.rst           |    4 +-
+ Documentation/bpf/index.rst                        |    4 +-
+ Documentation/dev-tools/kselftest.rst              |    3 +-
+ .../devicetree/bindings/net/ethernet-phy.yaml      |    3 +-
+ Documentation/devicetree/bindings/net/fsl-fec.txt  |    1 +
+ Documentation/devicetree/bindings/net/mdio.yaml    |   50 +-
+ .../devicetree/bindings/net/nxp,tja11xx.yaml       |   61 +
+ .../devicetree/bindings/net/qca,ar71xx.txt         |   45 -
+ .../devicetree/bindings/net/qca,ar71xx.yaml        |  216 ++
+ .../devicetree/bindings/net/qualcomm-bluetooth.txt |    1 +
+ Documentation/hwmon/bcm54140.rst                   |   45 +
+ Documentation/hwmon/index.rst                      |    1 +
+ Documentation/networking/{6pack.txt => 6pack.rst}  |   46 +-
+ .../networking/{altera_tse.txt => altera_tse.rst}  |   89 +-
+ .../{arcnet-hardware.txt => arcnet-hardware.rst}   | 2227 ++++++++++----------
+ .../networking/{arcnet.txt => arcnet.rst}          |  348 +--
+ Documentation/networking/{atm.txt => atm.rst}      |    6 +
+ Documentation/networking/{ax25.txt => ax25.rst}    |    6 +
+ .../networking/{baycom.txt => baycom.rst}          |  120 +-
+ .../networking/{bonding.txt => bonding.rst}        | 1315 ++++++------
+ Documentation/networking/caif/caif.rst             |    2 -
+ Documentation/networking/caif/index.rst            |   13 +
+ .../caif/{Linux-CAIF.txt => linux_caif.rst}        |   54 +-
+ Documentation/networking/caif/spi_porting.rst      |  229 ++
+ Documentation/networking/caif/spi_porting.txt      |  208 --
+ .../networking/{cdc_mbim.txt => cdc_mbim.rst}      |   76 +-
+ Documentation/networking/cops.rst                  |   80 +
+ Documentation/networking/cops.txt                  |   63 -
+ .../networking/{cxacru.txt => cxacru.rst}          |   86 +-
+ Documentation/networking/{dccp.txt => dccp.rst}    |   39 +-
+ Documentation/networking/{dctcp.txt => dctcp.rst}  |   14 +-
+ .../networking/{decnet.txt => decnet.rst}          |   77 +-
+ Documentation/networking/{defza.txt => defza.rst}  |    8 +-
+ .../networking/device_drivers/intel/e100.rst       |    2 +-
+ .../networking/device_drivers/intel/ixgb.rst       |    2 +-
+ .../{dns_resolver.txt => dns_resolver.rst}         |   52 +-
+ .../networking/{driver.txt => driver.rst}          |   22 +-
+ Documentation/networking/{eql.txt => eql.rst}      |  443 ++--
+ .../networking/{fib_trie.txt => fib_trie.rst}      |   16 +-
+ .../networking/{filter.txt => filter.rst}          |  868 ++++----
+ .../networking/{fore200e.txt => fore200e.rst}      |    8 +-
+ .../networking/{framerelay.txt => framerelay.rst}  |   21 +-
+ .../networking/{gen_stats.txt => gen_stats.rst}    |   98 +-
+ .../{generic-hdlc.txt => generic-hdlc.rst}         |   86 +-
+ .../{generic_netlink.txt => generic_netlink.rst}   |    6 +
+ Documentation/networking/{gtp.txt => gtp.rst}      |   97 +-
+ Documentation/networking/{hinic.txt => hinic.rst}  |    5 +-
+ Documentation/networking/{ila.txt => ila.rst}      |   89 +-
+ Documentation/networking/index.rst                 |   38 +
+ .../networking/{ip-sysctl.txt => ip-sysctl.rst}    |  843 +++++---
+ .../networking/{ip_dynaddr.txt => ip_dynaddr.rst}  |   29 +-
+ Documentation/networking/{ipddp.txt => ipddp.rst}  |   13 +-
+ .../networking/{iphase.txt => iphase.rst}          |  187 +-
+ Documentation/networking/{ipsec.txt => ipsec.rst}  |   14 +-
+ Documentation/networking/{ipv6.txt => ipv6.rst}    |    8 +-
+ .../networking/{ipvlan.txt => ipvlan.rst}          |  159 +-
+ .../{ipvs-sysctl.txt => ipvs-sysctl.rst}           |  188 +-
+ Documentation/networking/{kcm.txt => kcm.rst}      |   85 +-
+ Documentation/networking/ltpc.txt                  |    2 +-
+ Documentation/networking/packet_mmap.txt           |    2 +-
+ Documentation/networking/snmp_counter.rst          |    2 +-
+ MAINTAINERS                                        |    8 +-
+ drivers/atm/Kconfig                                |    4 +-
+ drivers/bluetooth/btqca.c                          |   18 +-
+ drivers/bluetooth/btqca.h                          |    3 +-
+ drivers/bluetooth/btrtl.c                          |   10 +-
+ drivers/bluetooth/btusb.c                          |  185 +-
+ drivers/bluetooth/hci_bcm.c                        |    8 +-
+ drivers/bluetooth/hci_qca.c                        |   40 +-
+ drivers/net/Kconfig                                |    4 +-
+ drivers/net/appletalk/Kconfig                      |    6 +-
+ drivers/net/arcnet/Kconfig                         |    6 +-
+ drivers/net/bonding/bonding_priv.h                 |    2 +-
+ drivers/net/caif/Kconfig                           |    2 +-
+ drivers/net/dsa/b53/b53_srab.c                     |    2 +-
+ drivers/net/dsa/ocelot/felix.c                     |   34 +
+ drivers/net/dsa/ocelot/felix.h                     |    1 +
+ drivers/net/dsa/ocelot/felix_vsc9959.c             |    2 +
+ drivers/net/dsa/sja1105/sja1105.h                  |    1 +
+ drivers/net/dsa/sja1105/sja1105_clocking.c         |   58 +-
+ drivers/net/dsa/sja1105/sja1105_spi.c              |    2 +
+ drivers/net/ethernet/3com/3c509.c                  |    1 -
+ drivers/net/ethernet/3com/3c515.c                  |    1 -
+ drivers/net/ethernet/adaptec/starfire.c            |    1 -
+ drivers/net/ethernet/aquantia/atlantic/aq_macsec.c |    4 +-
+ drivers/net/ethernet/atheros/ag71xx.c              |   43 +-
+ drivers/net/ethernet/broadcom/genet/bcmgenet.c     |   49 +-
+ .../net/ethernet/cavium/liquidio/octeon_device.h   |   12 -
+ drivers/net/ethernet/dnet.c                        |    3 +-
+ .../ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c   |    9 +-
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |  141 +-
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h   |   10 +-
+ .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c   |    2 +-
+ drivers/net/ethernet/freescale/enetc/enetc_pf.c    |   44 +-
+ drivers/net/ethernet/freescale/fec.h               |    4 +-
+ drivers/net/ethernet/freescale/fec_main.c          |   85 +-
+ drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c  |    4 +-
+ drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h    |    5 +
+ drivers/net/ethernet/hisilicon/hns3/hnae3.h        |   12 +-
+ drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c |    4 +-
+ drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    |  155 +-
+ drivers/net/ethernet/hisilicon/hns3/hns3_enet.h    |   14 +-
+ drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c |   81 +-
+ .../net/ethernet/hisilicon/hns3/hns3pf/Makefile    |    1 +
+ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h |   40 +-
+ .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c |  166 +-
+ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 1688 ++++++++++-----
+ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h    |   34 +-
+ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c |   77 +-
+ .../ethernet/hisilicon/hns3/hns3pf/hclge_trace.h   |   87 +
+ .../net/ethernet/hisilicon/hns3/hns3vf/Makefile    |    1 +
+ .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |  368 +++-
+ .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h  |   26 +
+ .../ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c   |    7 +
+ .../ethernet/hisilicon/hns3/hns3vf/hclgevf_trace.h |   87 +
+ drivers/net/ethernet/huawei/hinic/Makefile         |    2 +-
+ drivers/net/ethernet/huawei/hinic/hinic_dev.h      |    3 +
+ drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c  |   18 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h  |    2 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h   |    2 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c   |  148 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h   |   48 +
+ drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c   |   98 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h   |    7 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_if.c    |   46 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_if.h    |   18 +
+ drivers/net/ethernet/huawei/hinic/hinic_hw_io.c    |   49 +
+ drivers/net/ethernet/huawei/hinic/hinic_hw_io.h    |   23 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c  | 1213 +++++++++++
+ drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.h  |  154 ++
+ drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c  |   17 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h  |   12 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c    |    7 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h    |    4 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c    |    9 +-
+ drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h    |    6 +-
+ drivers/net/ethernet/huawei/hinic/hinic_main.c     |  120 +-
+ drivers/net/ethernet/huawei/hinic/hinic_port.c     |   76 +-
+ drivers/net/ethernet/huawei/hinic/hinic_port.h     |    4 +-
+ drivers/net/ethernet/huawei/hinic/hinic_rx.c       |   15 +-
+ drivers/net/ethernet/huawei/hinic/hinic_sriov.c    | 1016 +++++++++
+ drivers/net/ethernet/huawei/hinic/hinic_sriov.h    |  102 +
+ drivers/net/ethernet/huawei/hinic/hinic_tx.c       |   17 +-
+ drivers/net/ethernet/intel/e1000/e1000_main.c      |    4 +-
+ drivers/net/ethernet/intel/e1000e/netdev.c         |   54 +
+ drivers/net/ethernet/intel/e1000e/regs.h           |    3 +
+ drivers/net/ethernet/intel/igc/Makefile            |    2 +-
+ drivers/net/ethernet/intel/igc/igc.h               |  400 ++--
+ drivers/net/ethernet/intel/igc/igc_base.c          |    3 +
+ drivers/net/ethernet/intel/igc/igc_defines.h       |   24 +-
+ drivers/net/ethernet/intel/igc/igc_ethtool.c       |   33 +-
+ drivers/net/ethernet/intel/igc/igc_hw.h            |    3 +
+ drivers/net/ethernet/intel/igc/igc_main.c          |  576 +++--
+ drivers/net/ethernet/intel/igc/igc_regs.h          |   12 +
+ drivers/net/ethernet/intel/igc/igc_tsn.c           |  157 ++
+ drivers/net/ethernet/intel/igc/igc_tsn.h           |    9 +
+ .../ethernet/marvell/octeontx2/nic/otx2_common.h   |    2 +-
+ drivers/net/ethernet/mellanox/mlx4/crdump.c        |    1 +
+ drivers/net/ethernet/mellanox/mlx4/en_rx.c         |    2 +-
+ drivers/net/ethernet/mellanox/mlx4/en_tx.c         |   20 +-
+ drivers/net/ethernet/mellanox/mlx4/mlx4_en.h       |    4 +-
+ .../net/ethernet/mellanox/mlx5/core/accel/ipsec.c  |   19 +-
+ .../net/ethernet/mellanox/mlx5/core/accel/ipsec.h  |    8 +-
+ .../ethernet/mellanox/mlx5/core/diag/fw_tracer.c   |    2 +-
+ drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h  |    2 +-
+ .../mellanox/mlx5/core/en_accel/en_accel.h         |    2 +
+ .../ethernet/mellanox/mlx5/core/en_accel/ipsec.c   |   87 +-
+ .../ethernet/mellanox/mlx5/core/en_accel/ipsec.h   |   25 -
+ .../mellanox/mlx5/core/en_accel/ipsec_stats.c      |   88 +-
+ .../net/ethernet/mellanox/mlx5/core/en_ethtool.c   |    2 +-
+ drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |   59 +-
+ drivers/net/ethernet/mellanox/mlx5/core/en_stats.c |   29 +-
+ drivers/net/ethernet/mellanox/mlx5/core/en_stats.h |    2 +
+ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    |   32 +-
+ .../net/ethernet/mellanox/mlx5/core/fpga/ipsec.c   |   31 +-
+ .../net/ethernet/mellanox/mlx5/core/fpga/ipsec.h   |   18 +-
+ drivers/net/ethernet/mellanox/mlx5/core/fs_core.c  |    5 +-
+ drivers/net/ethernet/mellanox/mlx5/core/main.c     |    3 +-
+ drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c    |    4 +-
+ drivers/net/ethernet/mellanox/mlxsw/Makefile       |    1 +
+ drivers/net/ethernet/mellanox/mlxsw/reg.h          |    2 +-
+ drivers/net/ethernet/mellanox/mlxsw/spectrum.c     |  463 +---
+ drivers/net/ethernet/mellanox/mlxsw/spectrum.h     |  167 +-
+ .../ethernet/mellanox/mlxsw/spectrum2_mr_tcam.c    |   14 +-
+ drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c |  207 +-
+ .../net/ethernet/mellanox/mlxsw/spectrum_flow.c    |  303 +++
+ .../net/ethernet/mellanox/mlxsw/spectrum_flower.c  |   24 +-
+ .../ethernet/mellanox/mlxsw/spectrum_matchall.c    |  278 +++
+ .../net/ethernet/mellanox/mlxsw/spectrum_router.c  |    8 +-
+ .../net/ethernet/mellanox/mlxsw/spectrum_span.c    |   64 +-
+ .../net/ethernet/mellanox/mlxsw/spectrum_span.h    |    7 +-
+ drivers/net/ethernet/mscc/Makefile                 |    2 +-
+ drivers/net/ethernet/mscc/ocelot.c                 |  212 +-
+ drivers/net/ethernet/mscc/ocelot.h                 |    3 +-
+ drivers/net/ethernet/mscc/ocelot_ace.c             |  113 +-
+ drivers/net/ethernet/mscc/ocelot_ace.h             |    5 +-
+ drivers/net/ethernet/mscc/ocelot_board.c           |   27 +
+ drivers/net/ethernet/mscc/ocelot_flower.c          |   29 +-
+ drivers/net/ethernet/mscc/ocelot_ptp.c             |  324 +++
+ drivers/net/ethernet/mscc/ocelot_regs.c            |    2 +
+ drivers/net/ethernet/netronome/nfp/nfp_main.c      |    3 -
+ .../net/ethernet/netronome/nfp/nfp_net_ethtool.c   |    2 -
+ drivers/net/ethernet/pensando/ionic/ionic_main.c   |    2 +-
+ drivers/net/ethernet/qlogic/qed/qed_dev.c          |    4 +-
+ drivers/net/ethernet/qlogic/qed/qed_ll2.c          |    2 +-
+ drivers/net/ethernet/qlogic/qed/qed_main.c         |    9 +
+ drivers/net/ethernet/qlogic/qed/qed_roce.c         |   17 +-
+ drivers/net/ethernet/qlogic/qede/qede.h            |    1 +
+ drivers/net/ethernet/qlogic/qede/qede_main.c       |   68 +-
+ drivers/net/ethernet/qlogic/qlcnic/qlcnic.h        |    6 -
+ drivers/net/ethernet/realtek/r8169_main.c          |  142 +-
+ drivers/net/ethernet/stmicro/stmmac/common.h       |    1 +
+ drivers/net/ethernet/stmicro/stmmac/dwmac4.h       |    1 +
+ drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c  |   67 +
+ drivers/net/ethernet/sun/cassini.c                 |    2 +-
+ drivers/net/ethernet/ti/cpsw.c                     |   21 +
+ drivers/net/ethernet/ti/cpsw_new.c                 |   20 +
+ drivers/net/ethernet/ti/cpsw_priv.c                |   17 +-
+ drivers/net/ethernet/ti/cpsw_priv.h                |    2 +
+ drivers/net/ethernet/ti/cpts.c                     |  422 ++--
+ drivers/net/ethernet/ti/cpts.h                     |   27 +-
+ drivers/net/ethernet/ti/k3-cppi-desc-pool.c        |    4 +-
+ drivers/net/ethernet/ti/netcp_ethss.c              |    3 +-
+ drivers/net/hamradio/Kconfig                       |   10 +-
+ drivers/net/macvlan.c                              |    3 +-
+ drivers/net/phy/Kconfig                            |   11 +
+ drivers/net/phy/Makefile                           |    1 +
+ drivers/net/phy/at803x.c                           |   17 +
+ drivers/net/phy/bcm-phy-lib.c                      |   80 +
+ drivers/net/phy/bcm-phy-lib.h                      |    9 +
+ drivers/net/phy/bcm54140.c                         |  879 ++++++++
+ drivers/net/phy/broadcom.c                         |   14 +
+ drivers/net/phy/cortina.c                          |    1 -
+ drivers/net/phy/dp83867.c                          |    4 +-
+ drivers/net/phy/marvell10g.c                       |    2 -
+ drivers/net/phy/mdio-bcm-iproc.c                   |    2 +-
+ drivers/net/phy/mdio_bus.c                         |   24 +-
+ drivers/net/phy/micrel.c                           |  128 +-
+ drivers/net/phy/mscc/mscc_main.c                   |    7 +-
+ drivers/net/phy/nxp-tja11xx.c                      |  201 +-
+ drivers/net/phy/phy-c45.c                          |    1 -
+ drivers/net/phy/phy_device.c                       |   16 +-
+ drivers/net/phy/phylink.c                          |   46 +-
+ drivers/net/phy/realtek.c                          |   15 +-
+ drivers/net/phy/teranetics.c                       |    1 -
+ drivers/net/wan/Kconfig                            |    4 +-
+ drivers/of/of_mdio.c                               |   73 +-
+ drivers/power/supply/test_power.c                  |    2 +-
+ drivers/ptp/ptp_clockmatrix.c                      |    2 +-
+ drivers/ptp/ptp_idt82p33.c                         |    6 +-
+ drivers/ptp/ptp_ines.c                             |    8 +-
+ drivers/ptp/ptp_kvm.c                              |    2 +-
+ include/linux/brcmphy.h                            |    5 +
+ include/linux/if_bridge.h                          |    2 +
+ include/linux/mlx5/accel.h                         |   12 +
+ include/linux/netdevice.h                          |   43 +
+ include/linux/of_mdio.h                            |   11 +-
+ include/linux/phy.h                                |   21 +-
+ include/linux/phylink.h                            |    6 +-
+ include/linux/vermagic.h                           |    4 +
+ include/net/addrconf.h                             |    2 -
+ include/net/bluetooth/bluetooth.h                  |    8 +
+ include/net/bluetooth/hci.h                        |   17 +-
+ include/net/bluetooth/hci_core.h                   |   16 +
+ include/net/bluetooth/mgmt.h                       |    7 +
+ include/net/ip6_route.h                            |    2 +-
+ include/net/ipv6.h                                 |    1 -
+ include/net/ipv6_stubs.h                           |    2 +-
+ include/net/mptcp.h                                |    3 +
+ include/net/netfilter/nf_tables.h                  |    4 +
+ include/net/netns/ipv4.h                           |    2 +
+ include/net/sch_generic.h                          |    5 -
+ include/net/switchdev.h                            |   62 +
+ include/net/xdp.h                                  |    2 +
+ include/soc/mscc/ocelot.h                          |   15 +-
+ .../net/ethernet => include/soc}/mscc/ocelot_ptp.h |   17 +
+ include/trace/events/qrtr.h                        |  115 +
+ include/uapi/linux/if.h                            |    1 +
+ include/uapi/linux/if_bridge.h                     |   42 +
+ include/uapi/linux/if_ether.h                      |    1 +
+ include/uapi/linux/if_link.h                       |    1 +
+ include/uapi/linux/mrp_bridge.h                    |   84 +
+ include/uapi/linux/netfilter/nf_conntrack_common.h |    8 +-
+ include/uapi/linux/netfilter/nf_nat.h              |    4 +-
+ kernel/bpf/devmap.c                                |    1 -
+ kernel/module.c                                    |    3 +
+ net/Kconfig                                        |    2 +-
+ net/atm/Kconfig                                    |    2 +-
+ net/ax25/Kconfig                                   |    6 +-
+ net/batman-adv/bat_iv_ogm.c                        |    4 +-
+ net/batman-adv/bat_v_elp.c                         |    2 +-
+ net/batman-adv/bat_v_ogm.c                         |    4 +-
+ net/batman-adv/distributed-arp-table.h             |    5 -
+ net/batman-adv/main.h                              |    2 +-
+ net/batman-adv/trace.h                             |    1 -
+ net/batman-adv/types.h                             |    2 +-
+ net/bluetooth/Kconfig                              |   23 +-
+ net/bluetooth/Makefile                             |    1 +
+ net/bluetooth/hci_conn.c                           |   25 +-
+ net/bluetooth/hci_core.c                           |  131 +-
+ net/bluetooth/hci_debugfs.c                        |   46 +
+ net/bluetooth/hci_event.c                          |   54 +-
+ net/bluetooth/hci_request.c                        |    4 +-
+ net/bluetooth/l2cap_sock.c                         |  138 +-
+ net/bluetooth/mgmt.c                               |   55 +-
+ net/bluetooth/msft.c                               |  141 ++
+ net/bluetooth/msft.h                               |   18 +
+ net/bluetooth/smp.c                                |   33 +-
+ net/bridge/Kconfig                                 |   12 +
+ net/bridge/Makefile                                |    2 +
+ net/bridge/br_device.c                             |    3 +
+ net/bridge/br_if.c                                 |    2 +
+ net/bridge/br_input.c                              |    3 +
+ net/bridge/br_ioctl.c                              |    3 +-
+ net/bridge/br_mrp.c                                |  559 +++++
+ net/bridge/br_mrp_netlink.c                        |  120 ++
+ net/bridge/br_mrp_switchdev.c                      |  140 ++
+ net/bridge/br_netlink.c                            |   12 +-
+ net/bridge/br_private.h                            |   38 +-
+ net/bridge/br_private_mrp.h                        |   63 +
+ net/bridge/br_stp.c                                |    6 +
+ net/bridge/br_stp_if.c                             |   11 +-
+ net/bridge/br_sysfs_br.c                           |    4 +-
+ net/caif/caif_dev.c                                |    8 +-
+ net/ceph/Kconfig                                   |    2 +-
+ net/core/dev.c                                     |   34 +-
+ net/core/gen_stats.c                               |    2 +-
+ net/core/link_watch.c                              |   12 +-
+ net/core/net-sysfs.c                               |   35 +-
+ net/core/netpoll.c                                 |    9 +-
+ net/core/rtnetlink.c                               |   11 +-
+ net/dccp/dccp.h                                    |    5 -
+ net/decnet/Kconfig                                 |    4 +-
+ net/dns_resolver/Kconfig                           |    2 +-
+ net/dns_resolver/dns_key.c                         |    2 +-
+ net/dns_resolver/dns_query.c                       |    2 +-
+ net/dsa/Kconfig                                    |    1 +
+ net/dsa/dsa.c                                      |    2 +-
+ net/dsa/dsa_priv.h                                 |    3 +
+ net/dsa/slave.c                                    |   30 +-
+ net/ethtool/ioctl.c                                |    5 +-
+ net/hsr/hsr_device.c                               |    4 +-
+ net/hsr/hsr_main.h                                 |   19 -
+ net/ipv4/Kconfig                                   |    2 +-
+ net/ipv4/af_inet.c                                 |    3 +-
+ net/ipv4/fib_semantics.c                           |    3 +
+ net/ipv4/icmp.c                                    |    2 +-
+ net/ipv4/nexthop.c                                 |    5 +-
+ net/ipv4/sysctl_net_ipv4.c                         |    9 +
+ net/ipv4/tcp_output.c                              |    8 +-
+ net/ipv6/Kconfig                                   |    2 +-
+ net/ipv6/addrconf.c                                |   39 +-
+ net/ipv6/addrconf_core.c                           |    3 +-
+ net/ipv6/anycast.c                                 |    4 +-
+ net/ipv6/ila/ila.h                                 |    5 -
+ net/ipv6/ila/ila_xlat.c                            |    2 -
+ net/ipv6/ndisc.c                                   |    2 +-
+ net/ipv6/route.c                                   |   14 +-
+ net/mptcp/subflow.c                                |   18 +
+ net/netfilter/nf_conntrack_standalone.c            |    4 +-
+ net/netfilter/nf_flow_table_offload.c              |    3 +
+ net/netfilter/nf_tables_api.c                      |   38 +-
+ net/netfilter/nft_nat.c                            |  110 +-
+ net/openvswitch/datapath.h                         |    2 +-
+ net/openvswitch/meter.c                            |  305 ++-
+ net/openvswitch/meter.h                            |   20 +-
+ net/qrtr/ns.c                                      |   20 +-
+ net/sched/act_ct.c                                 |    2 +
+ net/sched/cls_api.c                                |    5 +-
+ net/sched/em_ipt.c                                 |    2 +-
+ net/smc/af_smc.c                                   |   79 +-
+ net/smc/smc.h                                      |    1 +
+ net/smc/smc_cdc.c                                  |    8 +-
+ net/smc/smc_clc.c                                  |   12 +-
+ net/smc/smc_clc.h                                  |    1 +
+ net/smc/smc_core.c                                 |  542 +++--
+ net/smc/smc_core.h                                 |   78 +-
+ net/smc/smc_ib.c                                   |   63 +-
+ net/smc/smc_ib.h                                   |   10 +-
+ net/smc/smc_ism.c                                  |    3 +-
+ net/smc/smc_llc.c                                  |  396 ++--
+ net/smc/smc_llc.h                                  |   16 +-
+ net/smc/smc_pnet.c                                 |  539 +++--
+ net/smc/smc_pnet.h                                 |    2 +
+ net/smc/smc_tx.c                                   |   13 +-
+ net/smc/smc_wr.c                                   |    2 +-
+ scripts/mod/modpost.c                              |    1 +
+ tools/bpf/bpf_asm.c                                |    2 +-
+ tools/bpf/bpf_dbg.c                                |    2 +-
+ tools/include/uapi/linux/if_link.h                 |    1 +
+ tools/testing/selftests/kselftest_harness.h        |  234 +-
+ tools/testing/selftests/net/Makefile               |    1 +
+ tools/testing/selftests/net/fib_nexthops.sh        |  223 +-
+ .../selftests/net/forwarding/pedit_dsfield.sh      |   66 +
+ .../testing/selftests/net/forwarding/tc_actions.sh |   26 +-
+ tools/testing/selftests/net/pmtu.sh                |  122 ++
+ tools/testing/selftests/net/tls.c                  |   93 +-
+ tools/testing/selftests/net/vrf-xfrm-tests.sh      |  436 ++++
+ .../tc-testing/tc-tests/actions/pedit.json         |   25 +
+ 401 files changed, 19918 insertions(+), 8349 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
+ delete mode 100644 Documentation/devicetree/bindings/net/qca,ar71xx.txt
+ create mode 100644 Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+ create mode 100644 Documentation/hwmon/bcm54140.rst
+ rename Documentation/networking/{6pack.txt => 6pack.rst} (90%)
+ rename Documentation/networking/{altera_tse.txt => altera_tse.rst} (85%)
+ rename Documentation/networking/{arcnet-hardware.txt => arcnet-hardware.rst} (66%)
+ rename Documentation/networking/{arcnet.txt => arcnet.rst} (76%)
+ rename Documentation/networking/{atm.txt => atm.rst} (89%)
+ rename Documentation/networking/{ax25.txt => ax25.rst} (91%)
+ rename Documentation/networking/{baycom.txt => baycom.rst} (58%)
+ rename Documentation/networking/{bonding.txt => bonding.rst} (75%)
+ create mode 100644 Documentation/networking/caif/index.rst
+ rename Documentation/networking/caif/{Linux-CAIF.txt => linux_caif.rst} (90%)
+ create mode 100644 Documentation/networking/caif/spi_porting.rst
+ delete mode 100644 Documentation/networking/caif/spi_porting.txt
+ rename Documentation/networking/{cdc_mbim.txt => cdc_mbim.rst} (88%)
+ create mode 100644 Documentation/networking/cops.rst
+ delete mode 100644 Documentation/networking/cops.txt
+ rename Documentation/networking/{cxacru.txt => cxacru.rst} (66%)
+ rename Documentation/networking/{dccp.txt => dccp.rst} (94%)
+ rename Documentation/networking/{dctcp.txt => dctcp.rst} (89%)
+ rename Documentation/networking/{decnet.txt => decnet.rst} (87%)
+ rename Documentation/networking/{defza.txt => defza.rst} (91%)
+ rename Documentation/networking/{dns_resolver.txt => dns_resolver.rst} (89%)
+ rename Documentation/networking/{driver.txt => driver.rst} (85%)
+ rename Documentation/networking/{eql.txt => eql.rst} (62%)
+ rename Documentation/networking/{fib_trie.txt => fib_trie.rst} (96%)
+ rename Documentation/networking/{filter.txt => filter.rst} (77%)
+ rename Documentation/networking/{fore200e.txt => fore200e.rst} (94%)
+ rename Documentation/networking/{framerelay.txt => framerelay.rst} (93%)
+ rename Documentation/networking/{gen_stats.txt => gen_stats.rst} (60%)
+ rename Documentation/networking/{generic-hdlc.txt => generic-hdlc.rst} (75%)
+ rename Documentation/networking/{generic_netlink.txt => generic_netlink.rst} (64%)
+ rename Documentation/networking/{gtp.txt => gtp.rst} (79%)
+ rename Documentation/networking/{hinic.txt => hinic.rst} (97%)
+ rename Documentation/networking/{ila.txt => ila.rst} (82%)
+ rename Documentation/networking/{ip-sysctl.txt => ip-sysctl.rst} (83%)
+ rename Documentation/networking/{ip_dynaddr.txt => ip_dynaddr.rst} (65%)
+ rename Documentation/networking/{ipddp.txt => ipddp.rst} (89%)
+ rename Documentation/networking/{iphase.txt => iphase.rst} (50%)
+ rename Documentation/networking/{ipsec.txt => ipsec.rst} (90%)
+ rename Documentation/networking/{ipv6.txt => ipv6.rst} (93%)
+ rename Documentation/networking/{ipvlan.txt => ipvlan.rst} (54%)
+ rename Documentation/networking/{ipvs-sysctl.txt => ipvs-sysctl.rst} (62%)
+ rename Documentation/networking/{kcm.txt => kcm.rst} (84%)
+ create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_trace.h
+ create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_trace.h
+ create mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c
+ create mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.h
+ create mode 100644 drivers/net/ethernet/huawei/hinic/hinic_sriov.c
+ create mode 100644 drivers/net/ethernet/huawei/hinic/hinic_sriov.h
+ create mode 100644 drivers/net/ethernet/intel/igc/igc_tsn.c
+ create mode 100644 drivers/net/ethernet/intel/igc/igc_tsn.h
+ create mode 100644 drivers/net/ethernet/mellanox/mlxsw/spectrum_flow.c
+ create mode 100644 drivers/net/ethernet/mellanox/mlxsw/spectrum_matchall.c
+ create mode 100644 drivers/net/ethernet/mscc/ocelot_ptp.c
+ create mode 100644 drivers/net/phy/bcm54140.c
+ rename {drivers/net/ethernet => include/soc}/mscc/ocelot_ptp.h (52%)
+ create mode 100644 include/trace/events/qrtr.h
+ create mode 100644 include/uapi/linux/mrp_bridge.h
+ create mode 100644 net/bluetooth/msft.c
+ create mode 100644 net/bluetooth/msft.h
+ create mode 100644 net/bridge/br_mrp.c
+ create mode 100644 net/bridge/br_mrp_netlink.c
+ create mode 100644 net/bridge/br_mrp_switchdev.c
+ create mode 100644 net/bridge/br_private_mrp.h
+ create mode 100755 tools/testing/selftests/net/vrf-xfrm-tests.sh
+Merging bpf-next/master (449e14bfdb83 bpf: Fix unused variable warning)
+$ git merge bpf-next/master
+Auto-merging tools/lib/bpf/libbpf.c
+Auto-merging net/netfilter/nf_conntrack_standalone.c
+Auto-merging net/ipv6/route.c
+Auto-merging net/ipv6/ndisc.c
+Auto-merging net/ipv6/addrconf.c
+Auto-merging net/ipv4/sysctl_net_ipv4.c
+Auto-merging kernel/umh.c
+Auto-merging kernel/sched/fair.c
+Auto-merging kernel/printk/printk.c
+Auto-merging kernel/events/callchain.c
+Auto-merging include/uapi/linux/bpf.h
+Auto-merging include/linux/printk.h
+Auto-merging include/linux/perf_event.h
+Auto-merging include/linux/mm.h
+Auto-merging include/linux/kprobes.h
+Auto-merging include/linux/fs.h
+Auto-merging fs/inode.c
+Merge made by the 'recursive' strategy.
+ arch/arm64/kernel/armv8_deprecated.c               |    2 +-
+ arch/arm64/kernel/fpsimd.c                         |    3 +-
+ arch/mips/lasat/sysctl.c                           |   13 +-
+ arch/riscv/net/bpf_jit_comp32.c                    |    5 +-
+ arch/s390/appldata/appldata_base.c                 |   11 +-
+ arch/s390/kernel/debug.c                           |    2 +-
+ arch/s390/kernel/topology.c                        |    2 +-
+ arch/s390/mm/cmm.c                                 |   12 +-
+ arch/x86/kernel/itmt.c                             |    3 +-
+ drivers/cdrom/cdrom.c                              |    2 +-
+ drivers/char/random.c                              |    2 +-
+ drivers/macintosh/mac_hid.c                        |    3 +-
+ drivers/media/rc/bpf-lirc.c                        |    2 +
+ drivers/parport/procfs.c                           |   39 +-
+ fs/dcache.c                                        |    2 +-
+ fs/drop_caches.c                                   |    2 +-
+ fs/file_table.c                                    |    4 +-
+ fs/fscache/main.c                                  |    3 +-
+ fs/inode.c                                         |    2 +-
+ fs/proc/proc_sysctl.c                              |   47 +-
+ fs/quota/dquot.c                                   |    2 +-
+ fs/xfs/xfs_sysctl.c                                |    4 +-
+ include/linux/bpf-cgroup.h                         |   23 +-
+ include/linux/bpf.h                                |   36 +-
+ include/linux/bpf_types.h                          |    6 +
+ include/linux/compaction.h                         |    2 +-
+ include/linux/coredump.h                           |    4 +
+ include/linux/file.h                               |    2 +
+ include/linux/filter.h                             |    2 -
+ include/linux/fs.h                                 |    6 +-
+ include/linux/ftrace.h                             |    3 +-
+ include/linux/hugetlb.h                            |   15 +-
+ include/linux/kprobes.h                            |    2 +-
+ include/linux/latencytop.h                         |    4 +-
+ include/linux/mm.h                                 |   14 +-
+ include/linux/mmzone.h                             |   27 +-
+ include/linux/nmi.h                                |   15 +-
+ include/linux/perf_event.h                         |   13 +-
+ include/linux/pid.h                                |    3 +
+ include/linux/printk.h                             |    2 +-
+ include/linux/sched/sysctl.h                       |   44 +-
+ include/linux/security.h                           |    2 +-
+ include/linux/sysctl.h                             |   61 +-
+ include/linux/timer.h                              |    3 +-
+ include/linux/vmstat.h                             |    8 +-
+ include/linux/writeback.h                          |   28 +-
+ include/uapi/linux/bpf.h                           |   44 +-
+ ipc/ipc_sysctl.c                                   |   10 +-
+ ipc/mq_sysctl.c                                    |    4 +-
+ kernel/bpf/btf.c                                   |    2 +
+ kernel/bpf/cgroup.c                                |  146 +-
+ kernel/bpf/core.c                                  |    6 +
+ kernel/bpf/helpers.c                               |   89 +-
+ kernel/bpf/syscall.c                               |  352 +-
+ kernel/bpf/verifier.c                              |   80 +-
+ kernel/cgroup/cgroup.c                             |   27 -
+ kernel/events/callchain.c                          |    2 +-
+ kernel/events/core.c                               |    6 +-
+ kernel/kprobes.c                                   |    2 +-
+ kernel/latencytop.c                                |    4 +-
+ kernel/pid_namespace.c                             |    2 +-
+ kernel/printk/printk.c                             |    2 +-
+ kernel/sched/core.c                                |    9 +-
+ kernel/sched/fair.c                                |    3 +-
+ kernel/sched/rt.c                                  |   10 +-
+ kernel/sched/topology.c                            |    2 +-
+ kernel/seccomp.c                                   |    2 +-
+ kernel/sysctl.c                                    | 3839 ++++++++++----------
+ kernel/time/timer.c                                |    3 +-
+ kernel/trace/bpf_trace.c                           |    2 +
+ kernel/trace/trace.c                               |    2 +-
+ kernel/umh.c                                       |    2 +-
+ kernel/utsname_sysctl.c                            |    2 +-
+ kernel/watchdog.c                                  |   12 +-
+ mm/compaction.c                                    |    2 +-
+ mm/hugetlb.c                                       |    9 +-
+ mm/page-writeback.c                                |   16 +-
+ mm/page_alloc.c                                    |   42 +-
+ mm/util.c                                          |   10 +-
+ mm/vmstat.c                                        |    4 +-
+ net/bridge/br_netfilter_hooks.c                    |    2 +-
+ net/core/filter.c                                  |   84 +-
+ net/core/neighbour.c                               |   28 +-
+ net/core/sock_map.c                                |   18 +-
+ net/core/sysctl_net_core.c                         |   27 +-
+ net/decnet/dn_dev.c                                |    7 +-
+ net/decnet/sysctl_net_decnet.c                     |   27 +-
+ net/ipv4/devinet.c                                 |    9 +-
+ net/ipv4/route.c                                   |    3 +-
+ net/ipv4/sysctl_net_ipv4.c                         |   38 +-
+ net/ipv6/addrconf.c                                |   33 +-
+ net/ipv6/ndisc.c                                   |    3 +-
+ net/ipv6/route.c                                   |    5 +-
+ net/ipv6/sysctl_net_ipv6.c                         |    3 +-
+ net/mpls/af_mpls.c                                 |    5 +-
+ net/netfilter/ipvs/ip_vs_ctl.c                     |    6 +-
+ net/netfilter/nf_conntrack_standalone.c            |    2 +-
+ net/netfilter/nf_log.c                             |    2 +-
+ net/phonet/sysctl.c                                |    3 +-
+ net/rds/tcp.c                                      |    6 +-
+ net/sctp/sysctl.c                                  |   32 +-
+ net/sunrpc/sysctl.c                                |   29 +-
+ net/sunrpc/xprtrdma/svc_rdma.c                     |    7 +-
+ net/xdp/xsk.c                                      |    4 +-
+ security/apparmor/lsm.c                            |    2 +-
+ security/min_addr.c                                |    2 +-
+ security/yama/yama_lsm.c                           |    2 +-
+ .../bpf/bpftool/Documentation/bpftool-feature.rst  |   12 +-
+ tools/bpf/bpftool/Documentation/bpftool-link.rst   |  118 +
+ tools/bpf/bpftool/Makefile                         |   13 +-
+ tools/bpf/bpftool/bash-completion/bpftool          |   41 +-
+ tools/bpf/bpftool/btf.c                            |    1 -
+ tools/bpf/bpftool/cgroup.c                         |   48 +-
+ tools/bpf/bpftool/common.c                         |    2 +
+ tools/bpf/bpftool/feature.c                        |  143 +-
+ tools/bpf/bpftool/gen.c                            |    1 -
+ tools/bpf/bpftool/jit_disasm.c                     |    1 -
+ tools/bpf/bpftool/link.c                           |  333 ++
+ tools/bpf/bpftool/main.c                           |    6 +-
+ tools/bpf/bpftool/main.h                           |   37 +
+ tools/include/uapi/linux/bpf.h                     |   44 +-
+ tools/lib/bpf/bpf.c                                |   19 +-
+ tools/lib/bpf/bpf.h                                |    4 +-
+ tools/lib/bpf/bpf_helpers.h                        |    7 +
+ tools/lib/bpf/btf_dump.c                           |    2 +-
+ tools/lib/bpf/hashmap.c                            |    7 +
+ tools/lib/bpf/libbpf.c                             |  705 ++--
+ tools/lib/bpf/libbpf.map                           |    6 +
+ tools/testing/selftests/bpf/.gitignore             |    4 +-
+ tools/testing/selftests/bpf/Makefile               |   16 +-
+ .../testing/selftests/bpf/prog_tests/bpf_obj_id.c  |  110 +-
+ .../selftests/bpf/prog_tests/btf_map_in_map.c      |   49 +
+ .../selftests/bpf/prog_tests/cls_redirect.c        |  456 +++
+ .../testing/selftests/bpf/prog_tests/core_reloc.c  |    2 +-
+ .../bpf/{test_hashmap.c => prog_tests/hashmap.c}   |  280 +-
+ .../selftests/bpf/prog_tests/ns_current_pid_tgid.c |    5 +-
+ .../testing/selftests/bpf/prog_tests/perf_buffer.c |    5 +
+ tools/testing/selftests/bpf/prog_tests/sk_assign.c |   21 +-
+ .../selftests/bpf/progs/test_btf_map_in_map.c      |   76 +
+ .../selftests/bpf/progs/test_cls_redirect.c        | 1058 ++++++
+ .../selftests/bpf/progs/test_cls_redirect.h        |   54 +
+ tools/testing/selftests/bpf/progs/test_obj_id.c    |   14 +-
+ tools/testing/selftests/bpf/progs/test_sk_assign.c |   82 +-
+ .../testing/selftests/bpf/progs/test_sysctl_prog.c |    2 +-
+ tools/testing/selftests/bpf/test_progs.c           |   21 +-
+ tools/testing/selftests/bpf/test_progs.h           |    7 +
+ tools/testing/selftests/bpf/test_verifier.c        |    7 +-
+ .../testing/selftests/bpf/verifier/event_output.c  |   24 +
+ .../selftests/bpf/verifier/prevent_map_lookup.c    |   30 -
+ tools/testing/selftests/bpf/verifier/sock.c        |   70 +
+ 150 files changed, 6265 insertions(+), 3308 deletions(-)
+ create mode 100644 tools/bpf/bpftool/Documentation/bpftool-link.rst
+ create mode 100644 tools/bpf/bpftool/link.c
+ create mode 100644 tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
+ create mode 100644 tools/testing/selftests/bpf/prog_tests/cls_redirect.c
+ rename tools/testing/selftests/bpf/{test_hashmap.c => prog_tests/hashmap.c} (53%)
+ create mode 100644 tools/testing/selftests/bpf/progs/test_btf_map_in_map.c
+ create mode 100644 tools/testing/selftests/bpf/progs/test_cls_redirect.c
+ create mode 100644 tools/testing/selftests/bpf/progs/test_cls_redirect.h
+Merging ipsec-next/master (26333c37fc28 xfrm: add IPv6 support for espintcp)
+$ git merge ipsec-next/master
+Auto-merging net/xfrm/xfrm_interface.c
+Auto-merging net/xfrm/espintcp.c
+Auto-merging net/ipv6/esp6_offload.c
+Auto-merging net/ipv6/Kconfig
+Auto-merging net/ipv4/Kconfig
+Auto-merging include/net/ipv6_stubs.h
+Merge made by the 'recursive' strategy.
+ include/net/ipv6_stubs.h  |   5 +
+ include/net/xfrm.h        |   5 +
+ net/ipv4/Kconfig          |   1 +
+ net/ipv4/udp.c            |  10 +-
+ net/ipv6/Kconfig          |  12 ++
+ net/ipv6/af_inet6.c       |   5 +
+ net/ipv6/ah6.c            |   1 +
+ net/ipv6/esp6.c           | 414 +++++++++++++++++++++++++++++++++++++++++++---
+ net/ipv6/esp6_offload.c   |   7 +-
+ net/ipv6/ip6_vti.c        |  18 +-
+ net/ipv6/ipcomp6.c        |   1 +
+ net/ipv6/xfrm6_input.c    | 106 +++++++++++-
+ net/ipv6/xfrm6_protocol.c |  48 ++++++
+ net/xfrm/Kconfig          |   3 +
+ net/xfrm/Makefile         |   2 +-
+ net/xfrm/espintcp.c       |  56 +++++--
+ net/xfrm/xfrm_interface.c |   5 +-
+ 17 files changed, 647 insertions(+), 52 deletions(-)
+Merging mlx5-next/mlx5-next (2dc8b5246d2c net/mlx5: TX WQE Add trailer insertion field)
+$ git merge mlx5-next/mlx5-next
+Auto-merging include/linux/mlx5/qp.h
+Auto-merging include/linux/mlx5/mlx5_ifc.h
+CONFLICT (content): Merge conflict in include/linux/mlx5/mlx5_ifc.h
+Auto-merging include/linux/mlx5/driver.h
+Removing include/linux/mlx5/cmd.h
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/main.c
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/health.c
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
+Auto-merging drivers/net/ethernet/mellanox/mlx5/core/en.h
+Auto-merging drivers/infiniband/hw/mlx5/qp.c
+Resolved 'include/linux/mlx5/mlx5_ifc.h' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+[master 78885e46b396] Merge remote-tracking branch 'mlx5-next/mlx5-next'
+$ git diff -M --stat --summary HEAD^..
+ drivers/infiniband/hw/mlx5/Makefile                |  28 +-
+ drivers/infiniband/hw/mlx5/cmd.c                   |  17 --
+ drivers/infiniband/hw/mlx5/cmd.h                   |   2 -
+ drivers/infiniband/hw/mlx5/cq.c                    |  11 +-
+ drivers/infiniband/hw/mlx5/devx.c                  |  10 +-
+ drivers/infiniband/hw/mlx5/flow.c                  |   4 +-
+ drivers/infiniband/hw/mlx5/ib_virt.c               |   2 +-
+ drivers/infiniband/hw/mlx5/mad.c                   |   5 +-
+ drivers/infiniband/hw/mlx5/main.c                  |  96 ++++---
+ drivers/infiniband/hw/mlx5/mlx5_ib.h               |   3 +-
+ drivers/infiniband/hw/mlx5/odp.c                   |   3 +-
+ drivers/infiniband/hw/mlx5/qp.c                    |  79 +++---
+ drivers/infiniband/hw/mlx5/qp.h                    |  46 ++++
+ .../mlx5/core/qp.c => infiniband/hw/mlx5/qpc.c}    | 304 ++++++---------------
+ drivers/infiniband/hw/mlx5/srq_cmd.c               |   2 +-
+ drivers/net/ethernet/mellanox/mlx5/core/Makefile   |   2 +-
+ drivers/net/ethernet/mellanox/mlx5/core/cq.c       |  23 +-
+ drivers/net/ethernet/mellanox/mlx5/core/debugfs.c  |  74 ++---
+ drivers/net/ethernet/mellanox/mlx5/core/ecpf.c     |  30 +-
+ drivers/net/ethernet/mellanox/mlx5/core/en.h       |   6 +-
+ .../net/ethernet/mellanox/mlx5/core/en/health.c    |   2 +-
+ .../ethernet/mellanox/mlx5/core/en/monitor_stats.c |  46 +---
+ drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c |   2 +-
+ .../net/ethernet/mellanox/mlx5/core/en_common.c    |   7 +-
+ .../net/ethernet/mellanox/mlx5/core/en_ethtool.c   |   2 +-
+ .../ethernet/mellanox/mlx5/core/en_fs_ethtool.c    |   2 +-
+ drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  68 +++--
+ drivers/net/ethernet/mellanox/mlx5/core/en_stats.c |  50 ++--
+ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    |  14 +-
+ drivers/net/ethernet/mellanox/mlx5/core/eq.c       |   6 +-
+ .../net/ethernet/mellanox/mlx5/core/esw/chains.c   |   2 +-
+ drivers/net/ethernet/mellanox/mlx5/core/eswitch.c  |  38 +--
+ drivers/net/ethernet/mellanox/mlx5/core/eswitch.h  |   6 +-
+ .../ethernet/mellanox/mlx5/core/eswitch_offloads.c |  22 +-
+ drivers/net/ethernet/mellanox/mlx5/core/fpga/cmd.c |  29 +-
+ .../net/ethernet/mellanox/mlx5/core/fpga/conn.c    | 136 +++------
+ .../net/ethernet/mellanox/mlx5/core/fpga/conn.h    |   2 +-
+ drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c   |  82 +++---
+ drivers/net/ethernet/mellanox/mlx5/core/fw.c       |  34 +--
+ drivers/net/ethernet/mellanox/mlx5/core/health.c   |   1 -
+ .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c  | 150 +++++-----
+ .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.h  |   6 +-
+ .../ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c |  19 +-
+ drivers/net/ethernet/mellanox/mlx5/core/lag.c      |  52 ++--
+ drivers/net/ethernet/mellanox/mlx5/core/lib/dm.c   |  15 +-
+ drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c  |   5 +-
+ drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c |  10 +-
+ .../net/ethernet/mellanox/mlx5/core/lib/port_tun.c |   1 -
+ .../net/ethernet/mellanox/mlx5/core/lib/vxlan.c    |  10 +-
+ drivers/net/ethernet/mellanox/mlx5/core/main.c     | 144 +++++-----
+ drivers/net/ethernet/mellanox/mlx5/core/mcg.c      |  11 +-
+ drivers/net/ethernet/mellanox/mlx5/core/mr.c       |  21 +-
+ .../net/ethernet/mellanox/mlx5/core/pagealloc.c    |  14 +-
+ drivers/net/ethernet/mellanox/mlx5/core/pd.c       |  12 +-
+ drivers/net/ethernet/mellanox/mlx5/core/port.c     |  11 +-
+ drivers/net/ethernet/mellanox/mlx5/core/rl.c       |  22 +-
+ .../ethernet/mellanox/mlx5/core/steering/dr_cmd.c  |  33 +--
+ .../mellanox/mlx5/core/steering/dr_icm_pool.c      |  53 ++--
+ .../ethernet/mellanox/mlx5/core/steering/dr_send.c |  58 ++--
+ .../mellanox/mlx5/core/steering/dr_types.h         |   2 +-
+ .../ethernet/mellanox/mlx5/core/steering/fs_dr.c   |   2 +-
+ drivers/net/ethernet/mellanox/mlx5/core/transobj.c | 113 +++-----
+ drivers/net/ethernet/mellanox/mlx5/core/uar.c      |  12 +-
+ drivers/net/ethernet/mellanox/mlx5/core/vport.c    | 142 +++++-----
+ include/linux/mlx5/cmd.h                           |  51 ----
+ include/linux/mlx5/cq.h                            |   2 +-
+ include/linux/mlx5/device.h                        |  44 ++-
+ include/linux/mlx5/driver.h                        |  19 +-
+ include/linux/mlx5/mlx5_ifc.h                      | 128 ++++++++-
+ include/linux/mlx5/qp.h                            |  55 +---
+ include/linux/mlx5/transobj.h                      |  19 +-
+ include/linux/mlx5/vport.h                         |   3 +-
+ 72 files changed, 1144 insertions(+), 1393 deletions(-)
+ create mode 100644 drivers/infiniband/hw/mlx5/qp.h
+ rename drivers/{net/ethernet/mellanox/mlx5/core/qp.c => infiniband/hw/mlx5/qpc.c} (55%)
+ delete mode 100644 include/linux/mlx5/cmd.h
+Merging netfilter-next/master (3ff7ddb1353d netfilter: nft_nat: add netmap support)
+$ git merge netfilter-next/master
+Already up to date.
+Merging ipvs-next/master (d54725cd11a5 netfilter: nf_tables: support for multiple devices per netdev hook)
+$ git merge ipvs-next/master
+Already up to date.
+Merging wireless-drivers-next/master (86501437d885 ssb: scan: fix block comments coding style issues)
+$ git merge wireless-drivers-next/master
+Auto-merging drivers/net/wireless/realtek/rtw88/pci.c
+Auto-merging drivers/net/wireless/intel/ipw2x00/ipw2200.c
+Auto-merging drivers/net/wireless/ath/ath11k/wmi.h
+Auto-merging drivers/net/wireless/ath/ath11k/debug.h
+Auto-merging drivers/net/wireless/ath/ath10k/wmi.h
+Auto-merging drivers/net/wireless/ath/ath10k/hw.h
+Auto-merging drivers/net/wireless/ath/ath10k/htt.h
+Merge made by the 'recursive' strategy.
+ drivers/net/wireless/ath/ath10k/core.c             |    5 +-
+ drivers/net/wireless/ath/ath10k/hif.h              |    9 +
+ drivers/net/wireless/ath/ath10k/htc.c              |   10 +
+ drivers/net/wireless/ath/ath10k/htc.h              |    3 +
+ drivers/net/wireless/ath/ath10k/htt.c              |    5 +
+ drivers/net/wireless/ath/ath10k/htt.h              |   13 +-
+ drivers/net/wireless/ath/ath10k/htt_rx.c           |   34 +-
+ drivers/net/wireless/ath/ath10k/htt_tx.c           |   35 +
+ drivers/net/wireless/ath/ath10k/hw.h               |    2 +-
+ drivers/net/wireless/ath/ath10k/mac.c              |   84 +-
+ drivers/net/wireless/ath/ath10k/pci.c              |    1 +
+ drivers/net/wireless/ath/ath10k/sdio.c             |   23 +
+ drivers/net/wireless/ath/ath10k/sdio.h             |    3 +-
+ drivers/net/wireless/ath/ath10k/txrx.c             |    2 +
+ drivers/net/wireless/ath/ath10k/wmi-tlv.c          |    6 +-
+ drivers/net/wireless/ath/ath10k/wmi.c              |   50 +-
+ drivers/net/wireless/ath/ath10k/wmi.h              |   10 +-
+ drivers/net/wireless/ath/ath11k/ahb.c              |    2 +-
+ drivers/net/wireless/ath/ath11k/core.h             |    6 +
+ drivers/net/wireless/ath/ath11k/debug.h            |    6 +
+ drivers/net/wireless/ath/ath11k/debugfs_sta.c      |  221 ++++
+ drivers/net/wireless/ath/ath11k/dp.h               |    4 +-
+ drivers/net/wireless/ath/ath11k/dp_rx.c            |   17 +-
+ drivers/net/wireless/ath/ath11k/hal.h              |    2 +-
+ drivers/net/wireless/ath/ath11k/peer.c             |   35 +-
+ drivers/net/wireless/ath/ath11k/peer.h             |    1 +
+ drivers/net/wireless/ath/ath11k/trace.h            |   12 +-
+ drivers/net/wireless/ath/ath11k/wmi.c              |  170 ++-
+ drivers/net/wireless/ath/ath11k/wmi.h              |   46 +-
+ drivers/net/wireless/ath/ath9k/hif_usb.c           |   58 +-
+ drivers/net/wireless/ath/ath9k/hif_usb.h           |    6 +
+ drivers/net/wireless/ath/ath9k/htc_drv_init.c      |   10 +-
+ drivers/net/wireless/ath/ath9k/htc_hst.c           |    6 +-
+ drivers/net/wireless/ath/ath9k/wmi.c               |    6 +-
+ drivers/net/wireless/ath/ath9k/wmi.h               |    3 +-
+ drivers/net/wireless/broadcom/b43legacy/xmit.c     |    1 +
+ .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  |    2 +-
+ .../broadcom/brcm80211/brcmfmac/commonring.c       |    8 +-
+ .../wireless/broadcom/brcm80211/brcmfmac/feature.c |    3 +-
+ .../broadcom/brcm80211/brcmsmac/mac80211_if.c      |    2 +
+ .../wireless/broadcom/brcm80211/brcmsmac/main.c    |    5 +-
+ .../net/wireless/broadcom/brcm80211/brcmsmac/stf.c |    7 +-
+ .../net/wireless/broadcom/brcm80211/brcmsmac/stf.h |    2 +-
+ drivers/net/wireless/intel/ipw2x00/ipw2200.c       |   23 +-
+ drivers/net/wireless/intersil/hostap/hostap_proc.c |    2 +
+ .../net/wireless/intersil/orinoco/spectrum_cs.c    |    3 +-
+ drivers/net/wireless/intersil/p54/p54usb.c         |    1 +
+ drivers/net/wireless/marvell/libertas/cmd.h        |    2 +-
+ drivers/net/wireless/marvell/libertas/cmdresp.c    |    5 +-
+ drivers/net/wireless/marvell/libertas/mesh.c       |    6 +-
+ drivers/net/wireless/marvell/libertas/mesh.h       |    2 +-
+ .../wireless/quantenna/qtnfmac/pcie/pearl_pcie.c   |    2 +-
+ .../wireless/quantenna/qtnfmac/pcie/topaz_pcie.c   |    2 +-
+ .../net/wireless/realtek/rtlwifi/rtl8188ee/sw.c    |    4 +-
+ .../net/wireless/realtek/rtlwifi/rtl8192ee/sw.c    |    4 +-
+ .../wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c   |    2 +-
+ .../net/wireless/realtek/rtlwifi/rtl8723ae/hw.c    |   10 +-
+ .../net/wireless/realtek/rtlwifi/rtl8723ae/sw.c    |    4 +-
+ .../net/wireless/realtek/rtlwifi/rtl8723be/sw.c    |    4 +-
+ .../net/wireless/realtek/rtlwifi/rtl8821ae/sw.c    |    4 +-
+ drivers/net/wireless/realtek/rtw88/bf.c            |    7 +-
+ drivers/net/wireless/realtek/rtw88/bf.h            |   22 +
+ drivers/net/wireless/realtek/rtw88/efuse.c         |   26 +
+ drivers/net/wireless/realtek/rtw88/efuse.h         |    3 +
+ drivers/net/wireless/realtek/rtw88/fw.c            |   48 +-
+ drivers/net/wireless/realtek/rtw88/fw.h            |   25 +
+ drivers/net/wireless/realtek/rtw88/mac.c           |  404 +++++--
+ drivers/net/wireless/realtek/rtw88/mac.h           |    1 +
+ drivers/net/wireless/realtek/rtw88/mac80211.c      |   40 +-
+ drivers/net/wireless/realtek/rtw88/main.c          |   56 +-
+ drivers/net/wireless/realtek/rtw88/main.h          |   52 +-
+ drivers/net/wireless/realtek/rtw88/pci.c           |   38 +-
+ drivers/net/wireless/realtek/rtw88/phy.c           |   56 +-
+ drivers/net/wireless/realtek/rtw88/phy.h           |    6 +
+ drivers/net/wireless/realtek/rtw88/reg.h           |   97 ++
+ drivers/net/wireless/realtek/rtw88/rtw8723d.c      |  761 +++++++++++++
+ drivers/net/wireless/realtek/rtw88/rtw8723d.h      |   50 +
+ .../net/wireless/realtek/rtw88/rtw8723d_table.c    | 1196 ++++++++++++++++++++
+ .../net/wireless/realtek/rtw88/rtw8723d_table.h    |   15 +
+ drivers/net/wireless/realtek/rtw88/rtw8822b.c      |   21 +-
+ drivers/net/wireless/realtek/rtw88/rtw8822c.c      |  149 +++
+ drivers/net/wireless/realtek/rtw88/rtw8822c.h      |   28 +
+ drivers/net/wireless/rsi/rsi_91x_mac80211.c        |    2 +-
+ drivers/net/wireless/st/cw1200/cw1200_spi.c        |    6 +-
+ drivers/net/wireless/ti/wlcore/cmd.h               |    1 +
+ drivers/net/wireless/ti/wlcore/main.c              |    4 +
+ drivers/ssb/scan.c                                 |    6 +-
+ drivers/ssb/sprom.c                                |   12 +-
+ 88 files changed, 3826 insertions(+), 322 deletions(-)
+ create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8723d.c
+ create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8723d.h
+ create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8723d_table.c
+ create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8723d_table.h
+Merging bluetooth/master (f794edc99901 Bluetooth: hci_h5: Add support for binding RTL8723BS with device tree)
+$ git merge bluetooth/master
+Auto-merging Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/net/qualcomm-bluetooth.txt |   5 +
+ .../devicetree/bindings/net/realtek-bluetooth.yaml |  54 ++++++++
+ drivers/bluetooth/btbcm.c                          | 139 ++++++++++++---------
+ drivers/bluetooth/btbcm.h                          |  10 +-
+ drivers/bluetooth/btusb.c                          |  12 +-
+ drivers/bluetooth/hci_bcm.c                        |  27 ++--
+ drivers/bluetooth/hci_h5.c                         |   2 +
+ drivers/bluetooth/hci_qca.c                        |  17 +--
+ include/net/bluetooth/hci.h                        |   9 ++
+ net/bluetooth/hci_event.c                          |   4 +-
+ 10 files changed, 186 insertions(+), 93 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
+Merging mac80211-next/master (60689de46c7f mac80211: fix memory overlap due to variable length param)
+$ git merge mac80211-next/master
+Auto-merging net/wireless/core.h
+Auto-merging net/mac80211/rc80211_minstrel_ht.c
+Auto-merging net/mac80211/main.c
+Auto-merging net/mac80211/ieee80211_i.h
+Auto-merging include/net/mac80211.h
+Auto-merging include/net/cfg80211.h
+Auto-merging include/linux/ieee80211.h
+Auto-merging drivers/net/wireless/mac80211_hwsim.c
+Auto-merging drivers/net/wireless/intel/iwlwifi/mvm/rs.c
+Merge made by the 'recursive' strategy.
+ drivers/net/wireless/ath/ath11k/mac.c              |   3 +-
+ drivers/net/wireless/ath/ath6kl/cfg80211.c         |  26 ++--
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c         |  19 ++-
+ drivers/net/wireless/intel/iwlwifi/mvm/rs.c        |   6 +-
+ drivers/net/wireless/mac80211_hwsim.c              |  63 ++++++++++
+ drivers/net/wireless/mac80211_hwsim.h              |   8 ++
+ drivers/net/wireless/marvell/mwifiex/cfg80211.c    |  16 +--
+ drivers/net/wireless/quantenna/qtnfmac/cfg80211.c  |  83 +++++++------
+ drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c  |  24 ----
+ drivers/staging/wilc1000/cfg80211.c                |  36 +++---
+ drivers/staging/wilc1000/cfg80211.h                |   5 +-
+ drivers/staging/wilc1000/netdev.c                  |  21 ++--
+ drivers/staging/wilc1000/netdev.h                  |   9 +-
+ include/linux/ieee80211.h                          |  23 +++-
+ include/net/cfg80211.h                             | 134 ++++++++++++++++++---
+ include/net/mac80211.h                             |  35 +++++-
+ include/net/regulatory.h                           |   7 --
+ include/uapi/linux/nl80211.h                       |  23 ++++
+ net/mac80211/agg-tx.c                              |  79 +++++++-----
+ net/mac80211/cfg.c                                 |  93 +++++++++-----
+ net/mac80211/chan.c                                |   1 +
+ net/mac80211/debugfs_netdev.c                      |   2 +-
+ net/mac80211/he.c                                  |  13 +-
+ net/mac80211/ibss.c                                |   5 +
+ net/mac80211/ieee80211_i.h                         |   9 +-
+ net/mac80211/iface.c                               |   5 +
+ net/mac80211/main.c                                |  11 +-
+ net/mac80211/mesh.c                                |   1 +
+ net/mac80211/mlme.c                                |  62 +++++++---
+ net/mac80211/offchannel.c                          |   4 +
+ net/mac80211/rc80211_minstrel_ht.c                 |   3 +-
+ net/mac80211/rx.c                                  |  17 ++-
+ net/mac80211/scan.c                                |   4 +-
+ net/mac80211/sta_info.h                            |   4 +
+ net/mac80211/tdls.c                                |   7 +-
+ net/mac80211/trace.h                               |  41 +++++--
+ net/mac80211/tx.c                                  |   7 +-
+ net/mac80211/vht.c                                 |  10 +-
+ net/wireless/chan.c                                |  71 ++++++-----
+ net/wireless/core.c                                |  10 +-
+ net/wireless/core.h                                |   9 +-
+ net/wireless/mlme.c                                | 106 ++++++++--------
+ net/wireless/nl80211.c                             |  44 ++++++-
+ net/wireless/rdev-ops.h                            |  11 +-
+ net/wireless/reg.c                                 |  40 +++---
+ net/wireless/scan.c                                |   4 +-
+ net/wireless/sme.c                                 |   2 +
+ net/wireless/trace.h                               |  41 ++++---
+ net/wireless/util.c                                |  58 +++++----
+ 49 files changed, 873 insertions(+), 442 deletions(-)
+Merging gfs2/for-next (197694d09af5 docs: filesystems: convert gfs2-glocks.txt to ReST)
+$ git merge gfs2/for-next
+Auto-merging MAINTAINERS
+Merge made by the 'recursive' strategy.
+ .../{gfs2-glocks.txt => gfs2-glocks.rst}           | 149 ++++++++++++---------
+ Documentation/filesystems/index.rst                |   1 +
+ MAINTAINERS                                        |   2 +-
+ 3 files changed, 87 insertions(+), 65 deletions(-)
+ rename Documentation/filesystems/{gfs2-glocks.txt => gfs2-glocks.rst} (63%)
+Merging mtd/mtd/next (025a06c1104c mtd: Convert fallthrough comments into statements)
+$ git merge mtd/mtd/next
+Already up to date.
+Merging nand/nand/next (fca88925d769 mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND))
+$ git merge nand/nand/next
+Already up to date.
+Merging spi-nor/spi-nor/next (b84691596328 mtd: spi-nor: Fix description of the sr_ready() return value)
+$ git merge spi-nor/spi-nor/next
+Merge made by the 'recursive' strategy.
+ drivers/mtd/spi-nor/core.c      | 18 +++++++++---------
+ drivers/mtd/spi-nor/macronix.c  |  6 ++++++
+ drivers/mtd/spi-nor/micron-st.c |  6 +++++-
+ drivers/mtd/spi-nor/spansion.c  |  4 +++-
+ include/linux/mtd/spi-nor.h     | 16 ++++++++--------
+ 5 files changed, 31 insertions(+), 19 deletions(-)
+Merging crypto/master (9c3d6497fbfa crypto: bcm - Delete redundant variable definition)
+$ git merge crypto/master
+Auto-merging drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
+Auto-merging MAINTAINERS
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/rng/arm-cctrng.yaml        |  54 ++
+ MAINTAINERS                                        |   9 +
+ arch/arm64/crypto/crct10dif-ce-core.S              |   2 +-
+ crypto/algapi.c                                    |  24 +-
+ crypto/algif_rng.c                                 |   2 +-
+ crypto/api.c                                       |   3 +-
+ crypto/drbg.c                                      |  26 +-
+ crypto/internal.h                                  |   1 +
+ crypto/jitterentropy-kcapi.c                       |  27 +
+ crypto/jitterentropy.c                             | 417 ++++++++---
+ drivers/char/hw_random/Kconfig                     |  13 +
+ drivers/char/hw_random/Makefile                    |   1 +
+ drivers/char/hw_random/cctrng.c                    | 737 +++++++++++++++++++
+ drivers/char/hw_random/cctrng.h                    |  72 ++
+ drivers/char/hw_random/omap-rng.c                  |   5 +-
+ drivers/char/hw_random/xgene-rng.c                 |   4 +-
+ drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c  |   4 +-
+ drivers/crypto/amlogic/amlogic-gxl-core.c          |   4 +-
+ drivers/crypto/bcm/cipher.c                        |   1 -
+ drivers/crypto/ccp/Kconfig                         |   3 +-
+ drivers/crypto/chelsio/chcr_algo.c                 |   2 +-
+ drivers/crypto/hisilicon/Kconfig                   |   4 +
+ drivers/crypto/hisilicon/hpre/hpre.h               |   1 -
+ drivers/crypto/hisilicon/hpre/hpre_main.c          | 176 ++---
+ drivers/crypto/hisilicon/qm.c                      | 803 ++++++++++++++++++++-
+ drivers/crypto/hisilicon/qm.h                      |  41 +-
+ drivers/crypto/hisilicon/sec2/sec.h                |   1 -
+ drivers/crypto/hisilicon/sec2/sec_main.c           | 177 ++---
+ drivers/crypto/hisilicon/zip/zip_main.c            | 188 ++---
+ drivers/crypto/marvell/octeontx/otx_cptpf_main.c   |   4 +-
+ drivers/crypto/marvell/octeontx/otx_cptpf_mbox.c   |  12 +-
+ drivers/crypto/marvell/octeontx/otx_cptpf_ucode.c  |  95 +--
+ drivers/crypto/marvell/octeontx/otx_cptvf_algs.c   |   6 +-
+ drivers/crypto/marvell/octeontx/otx_cptvf_main.c   |  12 +-
+ drivers/crypto/marvell/octeontx/otx_cptvf_reqmgr.c |  10 +-
+ include/crypto/drbg.h                              |   6 +-
+ 36 files changed, 2356 insertions(+), 591 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/rng/arm-cctrng.yaml
+ create mode 100644 drivers/char/hw_random/cctrng.c
+ create mode 100644 drivers/char/hw_random/cctrng.h
+Merging drm/drm-next (937eea297e26 Merge tag 'amd-drm-next-5.8-2020-04-24' of git://people.freedesktop.org/~agd5f/linux into drm-next)
+$ git merge drm/drm-next
+Auto-merging mm/slub.c
+Removing include/drm/ttm/ttm_debug.h
+Removing include/drm/drm_pci.h
+Auto-merging include/drm/drm_displayid.h
+Auto-merging drivers/gpu/drm/virtio/virtgpu_ioctl.c
+Auto-merging drivers/gpu/drm/tidss/tidss_encoder.c
+CONFLICT (content): Merge conflict in drivers/gpu/drm/tidss/tidss_encoder.c
+Auto-merging drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+Auto-merging drivers/gpu/drm/mediatek/mtk_dsi.c
+Auto-merging drivers/gpu/drm/mediatek/mtk_drm_drv.c
+Auto-merging drivers/gpu/drm/mediatek/mtk_dpi.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_tgl.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_tgl.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_sklgt4.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_sklgt4.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_sklgt3.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_sklgt3.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_sklgt2.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_sklgt2.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_kblgt3.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_kblgt3.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_kblgt2.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_kblgt2.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_icl.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_icl.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_hsw.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_hsw.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_glk.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_glk.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_cnl.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_cnl.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_chv.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_chv.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_cflgt3.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_cflgt3.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_cflgt2.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_cflgt2.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_bxt.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_bxt.c
+Removing drivers/gpu/drm/i915/oa/i915_oa_bdw.h
+Removing drivers/gpu/drm/i915/oa/i915_oa_bdw.c
+Auto-merging drivers/gpu/drm/i915/i915_vma.c
+Auto-merging drivers/gpu/drm/i915/i915_reg.h
+Auto-merging drivers/gpu/drm/i915/i915_irq.c
+Auto-merging drivers/gpu/drm/i915/i915_drv.h
+Auto-merging drivers/gpu/drm/i915/gt/intel_timeline.c
+Auto-merging drivers/gpu/drm/i915/gt/intel_rps.c
+Auto-merging drivers/gpu/drm/i915/gt/intel_lrc.c
+Auto-merging drivers/gpu/drm/i915/display/intel_sprite.c
+Auto-merging drivers/gpu/drm/i915/display/intel_hdmi.c
+Auto-merging drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+Auto-merging drivers/gpu/drm/i915/display/intel_dp.c
+Auto-merging drivers/gpu/drm/i915/display/intel_display_power.c
+Auto-merging drivers/gpu/drm/i915/display/intel_ddi.c
+Auto-merging drivers/gpu/drm/etnaviv/etnaviv_drv.c
+Removing drivers/gpu/drm/drm_vram_helper_common.c
+Auto-merging drivers/gpu/drm/drm_ioctl.c
+Auto-merging drivers/gpu/drm/drm_edid.c
+Auto-merging drivers/gpu/drm/drm_dp_mst_topology.c
+Auto-merging drivers/gpu/drm/armada/armada_drv.c
+Auto-merging drivers/gpu/drm/amd/powerplay/renoir_ppt.c
+Auto-merging drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+Auto-merging drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+CONFLICT (content): Merge conflict in drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+Auto-merging drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+Auto-merging drivers/dma-buf/dma-buf.c
+Auto-merging MAINTAINERS
+Removing Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+Removing Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt
+Removing Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt
+Removing Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
+Removing Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
+Removing Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt
+Removing Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
+Removing Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
+Removing Documentation/devicetree/bindings/display/panel/simple-panel.txt
+Removing Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
+Removing Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt
+Removing Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
+Removing Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
+Removing Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
+Removing Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
+Removing Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
+Removing Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt
+Removing Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
+Removing Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
+Removing Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2587-53ts.txt
+Removing Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
+Removing Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt
+Removing Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt
+Removing Documentation/devicetree/bindings/display/panel/lg,lg4573.txt
+Removing Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt
+Removing Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt
+Removing Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt
+Removing Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
+Removing Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
+Removing Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
+Removing Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
+Removing Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
+Removing Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt
+Removing Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
+Removing Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
+Removing Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
+Resolved 'drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c' using previous resolution.
+Resolved 'drivers/gpu/drm/tidss/tidss_encoder.c' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+[master bd147722cdfe] Merge remote-tracking branch 'drm/drm-next'
+$ git diff -M --stat --summary HEAD^..
+ .../display/allwinner,sun6i-a31-mipi-dsi.yaml      |    2 +-
+ .../bindings/display/bridge/nwl-dsi.yaml           |  226 ++
+ .../bindings/display/dsi-controller.yaml           |    4 +-
+ .../display/panel/arm,versatile-tft-panel.txt      |   31 -
+ .../display/panel/arm,versatile-tft-panel.yaml     |   54 +
+ .../bindings/display/panel/boe,himax8279d.txt      |   24 -
+ .../bindings/display/panel/boe,himax8279d.yaml     |   59 +
+ .../bindings/display/panel/boe,tv101wum-nl6.yaml   |    2 +
+ .../bindings/display/panel/display-timings.yaml    |    8 +-
+ .../display/panel/feiyang,fy07024di26a30d.txt      |   20 -
+ .../display/panel/feiyang,fy07024di26a30d.yaml     |   58 +
+ .../bindings/display/panel/ilitek,ili9322.txt      |   49 -
+ .../bindings/display/panel/ilitek,ili9322.yaml     |   71 +
+ .../bindings/display/panel/ilitek,ili9881c.txt     |   20 -
+ .../bindings/display/panel/ilitek,ili9881c.yaml    |   50 +
+ .../bindings/display/panel/innolux,p097pfg.txt     |   24 -
+ .../bindings/display/panel/innolux,p097pfg.yaml    |   56 +
+ .../bindings/display/panel/innolux,p120zdg-bf1.txt |   22 -
+ .../display/panel/innolux,p120zdg-bf1.yaml         |   43 +
+ .../bindings/display/panel/jdi,lt070me05000.txt    |   31 -
+ .../bindings/display/panel/jdi,lt070me05000.yaml   |   69 +
+ .../display/panel/kingdisplay,kd035g6-54nt.txt     |   42 -
+ .../display/panel/kingdisplay,kd035g6-54nt.yaml    |   65 +
+ .../display/panel/kingdisplay,kd097d04.txt         |   22 -
+ .../display/panel/leadtek,ltk050h3146w.yaml        |   51 +
+ .../bindings/display/panel/lg,acx467akm-7.txt      |    7 -
+ .../bindings/display/panel/lg,ld070wx3-sl01.txt    |    7 -
+ .../bindings/display/panel/lg,lg4573.txt           |   19 -
+ .../bindings/display/panel/lg,lg4573.yaml          |   45 +
+ .../bindings/display/panel/lg,lh500wx1-sd03.txt    |    7 -
+ .../bindings/display/panel/lgphilips,lb035q02.txt  |   33 -
+ .../bindings/display/panel/lgphilips,lb035q02.yaml |   59 +
+ .../display/panel/olimex,lcd-olinuxino.txt         |   42 -
+ .../display/panel/olimex,lcd-olinuxino.yaml        |   70 +
+ .../display/panel/osddisplays,osd101t2587-53ts.txt |   14 -
+ .../bindings/display/panel/panel-common.yaml       |   11 +-
+ .../bindings/display/panel/panel-simple-dsi.yaml   |   12 +
+ .../bindings/display/panel/panel-simple.yaml       |    8 +-
+ .../bindings/display/panel/raydium,rm67191.txt     |   41 -
+ .../bindings/display/panel/raydium,rm67191.yaml    |   75 +
+ .../display/panel/samsung,amoled-mipi-dsi.yaml     |   65 +
+ .../bindings/display/panel/samsung,ld9040.txt      |   66 -
+ .../bindings/display/panel/samsung,ld9040.yaml     |  107 +
+ .../bindings/display/panel/samsung,s6d16d0.txt     |   30 -
+ .../bindings/display/panel/samsung,s6d16d0.yaml    |   56 +
+ .../bindings/display/panel/samsung,s6e3ha2.txt     |   31 -
+ .../bindings/display/panel/samsung,s6e63j0x03.txt  |   24 -
+ .../bindings/display/panel/samsung,s6e63m0.txt     |   33 -
+ .../bindings/display/panel/samsung,s6e63m0.yaml    |   60 +
+ .../bindings/display/panel/seiko,43wvf1g.txt       |   23 -
+ .../bindings/display/panel/seiko,43wvf1g.yaml      |   50 +
+ .../bindings/display/panel/sharp,lq150x1lg11.txt   |   36 -
+ .../bindings/display/panel/sharp,lq150x1lg11.yaml  |   58 +
+ .../bindings/display/panel/sharp,ls037v7dw01.txt   |   43 -
+ .../bindings/display/panel/sharp,ls037v7dw01.yaml  |   68 +
+ .../bindings/display/panel/sharp,ls043t1le01.txt   |   22 -
+ .../bindings/display/panel/sharp,ls043t1le01.yaml  |   51 +
+ .../bindings/display/panel/simple-panel.txt        |    1 -
+ .../bindings/display/panel/sitronix,st7701.txt     |   30 -
+ .../bindings/display/panel/sitronix,st7701.yaml    |   69 +
+ .../bindings/display/panel/sitronix,st7789v.txt    |   37 -
+ .../bindings/display/panel/sitronix,st7789v.yaml   |   63 +
+ .../bindings/display/panel/sony,acx565akm.txt      |   30 -
+ .../bindings/display/panel/sony,acx565akm.yaml     |   57 +
+ .../display/panel/startek,startek-kd050c.txt       |    4 -
+ .../display/panel/startek,startek-kd050c.yaml      |   33 +
+ .../devicetree/bindings/display/panel/tpo,td.yaml  |   65 +
+ .../bindings/display/panel/tpo,td028ttec1.txt      |   32 -
+ .../bindings/display/panel/tpo,td043mtea1.txt      |   33 -
+ .../bindings/display/panel/visionox,rm69299.yaml   |   57 +
+ .../display/rockchip/rockchip,rk3066-hdmi.txt      |   72 -
+ .../display/rockchip/rockchip,rk3066-hdmi.yaml     |  140 +
+ .../bindings/display/rockchip/rockchip-vop.txt     |   74 -
+ .../bindings/display/rockchip/rockchip-vop.yaml    |  134 +
+ Documentation/gpu/amdgpu.rst                       |   88 +
+ Documentation/gpu/drm-internals.rst                |   12 +
+ Documentation/gpu/drm-kms.rst                      |    5 +-
+ Documentation/gpu/drm-mm.rst                       |    9 -
+ Documentation/gpu/i915.rst                         |    6 +-
+ MAINTAINERS                                        |   12 +-
+ arch/arm/mach-sa1100/shannon.c                     |    9 +
+ drivers/char/agp/intel-gtt.c                       |    4 +-
+ drivers/dma-buf/Makefile                           |    3 +-
+ drivers/dma-buf/dma-buf.c                          |    2 +
+ drivers/dma-buf/dma-fence-chain.c                  |   10 +-
+ drivers/dma-buf/selftests.h                        |    1 +
+ drivers/dma-buf/st-dma-fence-chain.c               |  715 +++++
+ drivers/gpu/drm/Makefile                           |    6 +-
+ drivers/gpu/drm/amd/amdgpu/Makefile                |    2 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu.h                |   67 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c |    3 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c   |   40 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c            |    8 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c             |    2 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c            |  160 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h            |    3 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c        |   73 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         |  347 +--
+ drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c      |   12 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.h      |    1 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c        |   61 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c            |    2 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c     |  185 ++
+ drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.h     |   29 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c            |   47 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c            |   23 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h            |    6 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c            |   12 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c             |   42 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c            |    2 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_job.c            |   15 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_job.h            |    4 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.c           |    3 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.h           |    2 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c            |   10 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_nbio.h           |    1 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c             |    5 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c            |  273 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h            |   16 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c            |   74 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h            |    4 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c           |   13 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h           |   40 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.h           |    2 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h          |    4 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c            |    8 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h            |   12 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c          |    4 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c            |    9 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c            |    3 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c            |    6 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c            |  103 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h            |   32 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c           |   79 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h           |   20 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c             |   18 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h             |    4 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c        |    6 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c       |   99 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c           |   98 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.h           |   10 +-
+ drivers/gpu/drm/amd/amdgpu/atom.c                  |    7 +-
+ drivers/gpu/drm/amd/amdgpu/cik.c                   |    8 -
+ drivers/gpu/drm/amd/amdgpu/cik_sdma.c              |    8 +-
+ drivers/gpu/drm/amd/amdgpu/dce_v10_0.c             |    8 +-
+ drivers/gpu/drm/amd/amdgpu/dce_v11_0.c             |    8 +-
+ drivers/gpu/drm/amd/amdgpu/dce_v6_0.c              |   14 +-
+ drivers/gpu/drm/amd/amdgpu/dce_v8_0.c              |   14 +-
+ drivers/gpu/drm/amd/amdgpu/dce_virtual.c           |   13 +-
+ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c             | 2791 +++++++++++++++++++-
+ drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c              |   15 +-
+ drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c              |   35 +-
+ drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c              |   42 +-
+ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |  125 +-
+ drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c              |   35 +-
+ drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c             |    5 +-
+ drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c              |    2 +-
+ drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c              |    2 +-
+ drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c              |    2 +-
+ drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c              |    3 +
+ drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.c             |    3 +-
+ drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c             |    6 +-
+ drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c             |    3 +-
+ drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c            |   12 +-
+ drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h              |    3 +-
+ drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c              |   97 +-
+ drivers/gpu/drm/amd/amdgpu/mxgpu_nv.h              |   44 +-
+ drivers/gpu/drm/amd/amdgpu/mxgpu_vi.h              |    3 +-
+ drivers/gpu/drm/amd/amdgpu/navi10_ih.c             |  302 ++-
+ drivers/gpu/drm/amd/amdgpu/nbio_v2_3.c             |   18 -
+ drivers/gpu/drm/amd/amdgpu/nbio_v6_1.c             |   18 -
+ drivers/gpu/drm/amd/amdgpu/nbio_v7_0.c             |    7 -
+ drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c             |   36 +-
+ drivers/gpu/drm/amd/amdgpu/nv.c                    |   17 +-
+ drivers/gpu/drm/amd/amdgpu/psp_v10_0.c             |  141 +-
+ drivers/gpu/drm/amd/amdgpu/psp_v11_0.c             |  235 +-
+ drivers/gpu/drm/amd/amdgpu/psp_v12_0.c             |  172 +-
+ drivers/gpu/drm/amd/amdgpu/psp_v3_1.c              |  262 +-
+ drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c             |    8 +-
+ drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c             |    8 +-
+ drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c             |   35 +-
+ drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c             |  123 +-
+ drivers/gpu/drm/amd/amdgpu/si.c                    |    8 -
+ drivers/gpu/drm/amd/amdgpu/si_dma.c                |    7 +-
+ drivers/gpu/drm/amd/amdgpu/si_dpm.c                |   20 -
+ drivers/gpu/drm/amd/amdgpu/soc15.c                 |    3 +-
+ drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c              |    6 +-
+ drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c              |    6 +-
+ drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c              |   16 +-
+ drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c              |   23 +-
+ drivers/gpu/drm/amd/amdgpu/vce_v2_0.c              |    3 +-
+ drivers/gpu/drm/amd/amdgpu/vce_v3_0.c              |    3 +-
+ drivers/gpu/drm/amd/amdgpu/vce_v4_0.c              |    7 +-
+ drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c              |    9 +-
+ drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c              |   77 +-
+ drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c              |   90 +-
+ drivers/gpu/drm/amd/amdgpu/vi.c                    |   24 -
+ drivers/gpu/drm/amd/amdkfd/kfd_crat.c              |    2 +-
+ drivers/gpu/drm/amd/amdkfd/kfd_topology.c          |    2 -
+ drivers/gpu/drm/amd/display/Kconfig                |    8 +-
+ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |   93 +-
+ .../drm/amd/display/amdgpu_dm/amdgpu_dm_color.c    |   22 +-
+ .../drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c  |   71 +-
+ .../drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c  |    2 +-
+ .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c    |   88 +-
+ drivers/gpu/drm/amd/display/dc/basics/Makefile     |    3 +-
+ drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c   |    2 +-
+ .../amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c    |    2 +-
+ .../dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c       |    3 -
+ drivers/gpu/drm/amd/display/dc/core/dc.c           |   28 +-
+ drivers/gpu/drm/amd/display/dc/core/dc_link.c      |  579 ++--
+ drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   |   46 +-
+ drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c |    2 +-
+ drivers/gpu/drm/amd/display/dc/core/dc_resource.c  |    8 +-
+ drivers/gpu/drm/amd/display/dc/core/dc_sink.c      |    1 +
+ drivers/gpu/drm/amd/display/dc/dc.h                |   52 +-
+ drivers/gpu/drm/amd/display/dc/dc_dp_types.h       |    6 +
+ drivers/gpu/drm/amd/display/dc/dc_link.h           |   31 +-
+ drivers/gpu/drm/amd/display/dc/dc_stream.h         |    2 -
+ drivers/gpu/drm/amd/display/dc/dce/Makefile        |    2 +-
+ drivers/gpu/drm/amd/display/dc/dce/dce_abm.c       |    5 +-
+ .../gpu/drm/amd/display/dc/dce/dce_clock_source.c  |   33 -
+ drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h     |   65 +-
+ .../gpu/drm/amd/display/dc/dce/dce_link_encoder.c  |   20 +-
+ .../gpu/drm/amd/display/dc/dce/dce_link_encoder.h  |    3 +
+ .../gpu/drm/amd/display/dc/dce/dce_panel_cntl.c    |  105 +
+ .../gpu/drm/amd/display/dc/dce/dce_panel_cntl.h    |  117 +
+ drivers/gpu/drm/amd/display/dc/dce/dmub_abm.c      |  438 +++
+ .../dc/{basics/log_helpers.c => dce/dmub_abm.h}    |   25 +-
+ drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c      |   61 +-
+ .../drm/amd/display/dc/dce100/dce100_resource.c    |   31 +
+ .../amd/display/dc/dce110/dce110_hw_sequencer.c    |   43 +-
+ .../amd/display/dc/dce110/dce110_hw_sequencer.h    |    4 -
+ .../drm/amd/display/dc/dce110/dce110_resource.c    |   31 +
+ .../drm/amd/display/dc/dce112/dce112_resource.c    |   31 +
+ .../drm/amd/display/dc/dce120/dce120_resource.c    |   31 +
+ .../drm/amd/display/dc/dce80/dce80_hw_sequencer.c  |   28 -
+ .../gpu/drm/amd/display/dc/dce80/dce80_resource.c  |   31 +
+ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.c  |   18 +-
+ .../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c  |   85 +-
+ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_init.c  |    2 -
+ .../drm/amd/display/dc/dcn10/dcn10_link_encoder.c  |   20 +-
+ .../drm/amd/display/dc/dcn10/dcn10_link_encoder.h  |    3 +
+ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c  |    6 +-
+ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h  |    7 +-
+ .../gpu/drm/amd/display/dc/dcn10/dcn10_resource.c  |   31 +
+ drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c |   12 +-
+ drivers/gpu/drm/amd/display/dc/dcn20/dcn20_init.c  |    2 -
+ .../drm/amd/display/dc/dcn20/dcn20_link_encoder.c  |   40 +
+ .../drm/amd/display/dc/dcn20/dcn20_link_encoder.h  |    4 +
+ drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c  |   14 +-
+ drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h  |    7 +
+ .../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c  |   45 +-
+ drivers/gpu/drm/amd/display/dc/dcn21/dcn21_init.c  |    3 +-
+ .../drm/amd/display/dc/dcn21/dcn21_link_encoder.c  |   27 +-
+ .../gpu/drm/amd/display/dc/dcn21/dcn21_resource.c  |   81 +-
+ .../display/dc/dml/dcn20/display_mode_vba_20v2.c   |    3 +-
+ .../amd/display/dc/dml/dcn21/display_mode_vba_21.c |    4 +-
+ .../display/dc/dml/dcn21/display_rq_dlg_calc_21.c  |   17 +-
+ drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c     |   89 +
+ drivers/gpu/drm/amd/display/dc/inc/core_types.h    |    3 +
+ drivers/gpu/drm/amd/display/dc/inc/hw/abm.h        |    5 +-
+ drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h   |    2 +
+ drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h |   53 +
+ .../drm/amd/display/dc/inc/hw/timing_generator.h   |    3 +
+ drivers/gpu/drm/amd/display/dc/inc/hw/transform.h  |    2 +
+ drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h  |    4 +
+ .../drm/amd/display/dc/inc/hw_sequencer_private.h  |    2 -
+ .../amd/display/dc/virtual/virtual_link_encoder.c  |    9 +
+ drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h    |   17 +
+ .../gpu/drm/amd/display/dmub/inc/dmub_cmd_dal.h    |   15 +-
+ drivers/gpu/drm/amd/display/dmub/inc/dmub_srv.h    |   11 +
+ drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c  |   24 +-
+ drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c    |   25 +-
+ drivers/gpu/drm/amd/display/include/hdcp_types.h   |    7 +
+ .../gpu/drm/amd/display/include/logger_interface.h |    4 -
+ .../drm/amd/display/modules/color/color_gamma.c    |    2 +-
+ .../drm/amd/display/modules/freesync/freesync.c    |  101 +-
+ drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c    |    5 +-
+ drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h    |   30 +-
+ .../drm/amd/display/modules/hdcp/hdcp1_execution.c |    2 +-
+ .../drm/amd/display/modules/hdcp/hdcp2_execution.c |    2 +-
+ .../gpu/drm/amd/display/modules/hdcp/hdcp_log.c    |    8 +-
+ .../gpu/drm/amd/display/modules/hdcp/hdcp_psp.c    |  482 ++--
+ .../gpu/drm/amd/display/modules/inc/mod_freesync.h |    3 +
+ drivers/gpu/drm/amd/display/modules/inc/mod_hdcp.h |    5 +-
+ .../gpu/drm/amd/display/modules/inc/mod_shared.h   |    5 +-
+ .../amd/display/modules/info_packet/info_packet.c  |    3 +-
+ .../drm/amd/display/modules/power/power_helpers.c  |  103 +-
+ .../drm/amd/display/modules/power/power_helpers.h  |    3 +
+ .../amd/include/asic_reg/nbif/nbif_6_1_offset.h    |    2 +
+ .../amd/include/asic_reg/nbio/nbio_7_0_offset.h    |    2 +
+ .../amd/include/asic_reg/nbio/nbio_7_4_offset.h    |    2 +
+ .../drm/amd/include/asic_reg/pwr/pwr_10_0_offset.h |   27 +
+ .../amd/include/asic_reg/pwr/pwr_10_0_sh_mask.h    |   30 +
+ .../include/asic_reg/smuio/smuio_12_0_0_offset.h   |   30 +
+ .../include/asic_reg/smuio/smuio_12_0_0_sh_mask.h  |   33 +
+ drivers/gpu/drm/amd/include/atomfirmware.h         |  102 +
+ drivers/gpu/drm/amd/include/cgs_common.h           |    1 -
+ drivers/gpu/drm/amd/powerplay/amd_powerplay.c      |    3 +
+ drivers/gpu/drm/amd/powerplay/amdgpu_smu.c         |  288 +-
+ drivers/gpu/drm/amd/powerplay/arcturus_ppt.c       |   10 -
+ drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c  |  174 +-
+ .../amd/powerplay/hwmgr/smu7_clockpowergating.c    |   61 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c   |  135 +-
+ .../gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c   |   40 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c |   17 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c   |  157 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c   |    4 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/vega10_baco.c  |    2 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c |  141 +-
+ .../gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c |   32 +-
+ .../gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c   |    6 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/vega12_baco.c  |    2 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c |  149 +-
+ .../gpu/drm/amd/powerplay/hwmgr/vega12_thermal.c   |    7 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/vega20_baco.c  |    8 +-
+ drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c |  181 +-
+ .../gpu/drm/amd/powerplay/hwmgr/vega20_powertune.c |    6 +-
+ .../gpu/drm/amd/powerplay/hwmgr/vega20_thermal.c   |    7 +-
+ drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h     |    9 +-
+ drivers/gpu/drm/amd/powerplay/inc/hwmgr.h          |    1 +
+ .../amd/powerplay/inc/smu11_driver_if_arcturus.h   |   15 +-
+ .../gpu/drm/amd/powerplay/inc/smu12_driver_if.h    |   40 +-
+ drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h      |    5 +-
+ drivers/gpu/drm/amd/powerplay/inc/smumgr.h         |    7 +-
+ drivers/gpu/drm/amd/powerplay/navi10_ppt.c         |   99 +-
+ drivers/gpu/drm/amd/powerplay/renoir_ppt.c         |    8 +-
+ drivers/gpu/drm/amd/powerplay/smu_internal.h       |    5 +
+ drivers/gpu/drm/amd/powerplay/smu_v11_0.c          |   40 +-
+ drivers/gpu/drm/amd/powerplay/smu_v12_0.c          |   16 +-
+ drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c   |   18 +-
+ drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c |   35 +-
+ .../gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c  |    1 +
+ .../drm/amd/powerplay/smumgr/polaris10_smumgr.c    |   31 +-
+ .../gpu/drm/amd/powerplay/smumgr/smu10_smumgr.c    |   39 +-
+ drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c |   48 +-
+ drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.h |    4 +-
+ drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c |   69 +-
+ drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c      |   56 +-
+ .../gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c    |   15 +-
+ .../gpu/drm/amd/powerplay/smumgr/vega10_smumgr.c   |   56 +-
+ .../gpu/drm/amd/powerplay/smumgr/vega12_smumgr.c   |   68 +-
+ .../gpu/drm/amd/powerplay/smumgr/vega20_smumgr.c   |  106 +-
+ .../gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c    |   18 +-
+ drivers/gpu/drm/amd/powerplay/vega20_ppt.c         |    4 +-
+ drivers/gpu/drm/arc/arcpgu_drv.c                   |    7 +-
+ drivers/gpu/drm/arm/display/komeda/komeda_kms.c    |    2 +
+ drivers/gpu/drm/arm/hdlcd_drv.c                    |    7 +-
+ drivers/gpu/drm/arm/malidp_drv.c                   |    3 +-
+ drivers/gpu/drm/armada/armada_drv.c                |    2 +
+ drivers/gpu/drm/ast/ast_drv.c                      |    3 +
+ drivers/gpu/drm/ast/ast_main.c                     |    5 -
+ drivers/gpu/drm/ast/ast_mode.c                     |   13 +-
+ drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c   |   12 +-
+ drivers/gpu/drm/bochs/bochs.h                      |    1 -
+ drivers/gpu/drm/bochs/bochs_drv.c                  |    6 +-
+ drivers/gpu/drm/bochs/bochs_kms.c                  |   15 +-
+ drivers/gpu/drm/bridge/Kconfig                     |   16 +
+ drivers/gpu/drm/bridge/Makefile                    |    1 +
+ drivers/gpu/drm/bridge/adv7511/Kconfig             |    2 +-
+ drivers/gpu/drm/bridge/adv7511/adv7511_audio.c     |   26 +-
+ drivers/gpu/drm/bridge/nwl-dsi.c                   | 1213 +++++++++
+ drivers/gpu/drm/bridge/nwl-dsi.h                   |  144 +
+ drivers/gpu/drm/bridge/panel.c                     |    1 +
+ drivers/gpu/drm/bridge/sii9234.c                   |    3 +-
+ drivers/gpu/drm/bridge/synopsys/dw-hdmi.c          |   86 +-
+ drivers/gpu/drm/cirrus/cirrus.c                    |   74 +-
+ drivers/gpu/drm/drm_atomic.c                       |    8 +-
+ drivers/gpu/drm/drm_auth.c                         |   69 +-
+ drivers/gpu/drm/drm_blend.c                        |    6 +
+ drivers/gpu/drm/drm_bufs.c                         |    2 +-
+ drivers/gpu/drm/drm_client.c                       |    8 +-
+ drivers/gpu/drm/drm_connector.c                    |    6 +-
+ drivers/gpu/drm/drm_crtc_internal.h                |    4 +-
+ drivers/gpu/drm/drm_debugfs.c                      |   45 +-
+ drivers/gpu/drm/drm_dma.c                          |    2 +-
+ drivers/gpu/drm/drm_dp_helper.c                    |   96 +
+ drivers/gpu/drm/drm_dp_mst_topology.c              |  307 +--
+ drivers/gpu/drm/drm_drv.c                          |  219 +-
+ drivers/gpu/drm/drm_edid.c                         |  103 +-
+ drivers/gpu/drm/drm_fb_cma_helper.c                |    2 +-
+ drivers/gpu/drm/drm_fb_helper.c                    |   31 +-
+ drivers/gpu/drm/drm_framebuffer.c                  |    8 +-
+ drivers/gpu/drm/drm_gem.c                          |   23 +-
+ drivers/gpu/drm/drm_gem_framebuffer_helper.c       |  224 +-
+ drivers/gpu/drm/drm_gem_vram_helper.c              |  124 +-
+ drivers/gpu/drm/drm_internal.h                     |    7 +-
+ drivers/gpu/drm/drm_ioctl.c                        |    4 +-
+ drivers/gpu/drm/drm_managed.c                      |  275 ++
+ drivers/gpu/drm/drm_mipi_dbi.c                     |   33 +-
+ drivers/gpu/drm/drm_mode_config.c                  |  110 +-
+ drivers/gpu/drm/drm_pci.c                          |    4 +-
+ drivers/gpu/drm/drm_vblank.c                       |   94 +-
+ drivers/gpu/drm/drm_vm.c                           |    4 +-
+ drivers/gpu/drm/drm_vram_helper_common.c           |   94 -
+ drivers/gpu/drm/etnaviv/etnaviv_drv.c              |   18 +-
+ drivers/gpu/drm/exynos/exynos_dp.c                 |    8 +-
+ drivers/gpu/drm/exynos/exynos_drm_dpi.c            |    8 +-
+ drivers/gpu/drm/exynos/exynos_drm_dsi.c            |    8 +-
+ drivers/gpu/drm/exynos/exynos_drm_vidi.c           |    8 +-
+ drivers/gpu/drm/exynos/exynos_hdmi.c               |    8 +-
+ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c          |   14 +-
+ drivers/gpu/drm/gma500/cdv_intel_crt.c             |   14 +-
+ drivers/gpu/drm/gma500/cdv_intel_dp.c              |   47 +-
+ drivers/gpu/drm/gma500/cdv_intel_hdmi.c            |    4 +-
+ drivers/gpu/drm/gma500/cdv_intel_lvds.c            |  100 +-
+ drivers/gpu/drm/gma500/framebuffer.c               |   16 +-
+ drivers/gpu/drm/gma500/mdfld_dsi_dpi.c             |   11 +-
+ drivers/gpu/drm/gma500/mdfld_intel_display.c       |   31 -
+ drivers/gpu/drm/gma500/mdfld_output.h              |    1 -
+ drivers/gpu/drm/gma500/mdfld_tmd_vid.c             |    6 -
+ drivers/gpu/drm/gma500/mdfld_tpo_vid.c             |    6 -
+ drivers/gpu/drm/gma500/oaktrail_hdmi.c             |   19 +-
+ drivers/gpu/drm/gma500/oaktrail_lvds.c             |    5 +-
+ drivers/gpu/drm/gma500/psb_intel_drv.h             |    1 -
+ drivers/gpu/drm/gma500/psb_intel_lvds.c            |   18 +-
+ drivers/gpu/drm/gma500/psb_intel_sdvo.c            |   99 -
+ drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c         |   13 +-
+ drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c     |    9 +-
+ drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c    |    8 +-
+ drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c        |    2 +-
+ drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c       |    9 +-
+ drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c    |    1 -
+ drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c    |   43 -
+ drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.h    |    1 -
+ drivers/gpu/drm/i2c/sil164_drv.c                   |    7 +-
+ drivers/gpu/drm/i2c/tda998x_drv.c                  |   20 +-
+ drivers/gpu/drm/i915/Makefile                      |   23 +-
+ drivers/gpu/drm/i915/display/icl_dsi.c             |  167 +-
+ drivers/gpu/drm/i915/display/intel_atomic_plane.c  |   21 +-
+ drivers/gpu/drm/i915/display/intel_atomic_plane.h  |    2 +
+ drivers/gpu/drm/i915/display/intel_audio.c         |   18 +-
+ drivers/gpu/drm/i915/display/intel_bw.c            |    9 +-
+ drivers/gpu/drm/i915/display/intel_color.c         |  121 +-
+ drivers/gpu/drm/i915/display/intel_connector.c     |    2 +-
+ drivers/gpu/drm/i915/display/intel_crt.c           |   36 +-
+ drivers/gpu/drm/i915/display/intel_ddi.c           |  522 +++-
+ drivers/gpu/drm/i915/display/intel_ddi.h           |    3 +-
+ drivers/gpu/drm/i915/display/intel_display.c       |  470 +---
+ drivers/gpu/drm/i915/display/intel_display.h       |    8 +-
+ .../gpu/drm/i915/display/intel_display_debugfs.c   |   30 +-
+ .../gpu/drm/i915/display/intel_display_debugfs.h   |    4 +-
+ drivers/gpu/drm/i915/display/intel_display_power.c |   24 +-
+ drivers/gpu/drm/i915/display/intel_display_types.h |   41 +-
+ drivers/gpu/drm/i915/display/intel_dp.c            |  932 +++++--
+ drivers/gpu/drm/i915/display/intel_dp.h            |    4 +
+ .../gpu/drm/i915/display/intel_dp_aux_backlight.c  |   84 +-
+ .../gpu/drm/i915/display/intel_dp_link_training.c  |    9 +-
+ .../gpu/drm/i915/display/intel_dp_link_training.h  |    4 +
+ drivers/gpu/drm/i915/display/intel_dp_mst.c        |  153 +-
+ drivers/gpu/drm/i915/display/intel_dsi.c           |    9 +-
+ drivers/gpu/drm/i915/display/intel_dsi_vbt.c       |   11 +-
+ drivers/gpu/drm/i915/display/intel_dvo.c           |    9 +-
+ drivers/gpu/drm/i915/display/intel_fbc.c           |   84 +-
+ drivers/gpu/drm/i915/display/intel_fbdev.c         |   96 +-
+ drivers/gpu/drm/i915/display/intel_global_state.c  |    5 +-
+ drivers/gpu/drm/i915/display/intel_hdcp.c          |    6 +-
+ drivers/gpu/drm/i915/display/intel_hdcp.h          |    4 +-
+ drivers/gpu/drm/i915/display/intel_hdmi.c          |  253 +-
+ drivers/gpu/drm/i915/display/intel_hotplug.c       |   16 +-
+ drivers/gpu/drm/i915/display/intel_hotplug.h       |    3 +-
+ drivers/gpu/drm/i915/display/intel_lvds.c          |   22 +-
+ drivers/gpu/drm/i915/display/intel_overlay.c       |    2 +-
+ drivers/gpu/drm/i915/display/intel_panel.c         |   22 +-
+ drivers/gpu/drm/i915/display/intel_panel.h         |    3 +-
+ drivers/gpu/drm/i915/display/intel_psr.c           |   47 +-
+ drivers/gpu/drm/i915/display/intel_sdvo.c          |   22 +-
+ drivers/gpu/drm/i915/display/intel_sprite.c        |    8 +
+ drivers/gpu/drm/i915/display/intel_tc.c            |   47 +-
+ drivers/gpu/drm/i915/display/intel_tv.c            |   15 +-
+ drivers/gpu/drm/i915/display/vlv_dsi.c             |   15 +-
+ drivers/gpu/drm/i915/gem/i915_gem_context.c        |   85 +-
+ drivers/gpu/drm/i915/gem/i915_gem_context.h        |    4 +
+ drivers/gpu/drm/i915/gem/i915_gem_domain.c         |    2 +-
+ drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c     |  365 ++-
+ drivers/gpu/drm/i915/gem/i915_gem_object.c         |    1 -
+ drivers/gpu/drm/i915/gem/i915_gem_object_types.h   |    3 -
+ drivers/gpu/drm/i915/gem/i915_gem_pages.c          |    2 -
+ drivers/gpu/drm/i915/gem/i915_gem_phys.c           |    2 -
+ drivers/gpu/drm/i915/gem/i915_gem_shrinker.c       |   18 +-
+ drivers/gpu/drm/i915/gem/i915_gem_stolen.c         |    4 +-
+ .../gpu/drm/i915/gem/selftests/huge_gem_object.c   |    3 +-
+ .../gpu/drm/i915/gem/selftests/i915_gem_context.c  |    2 +-
+ drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c |    4 -
+ .../gpu/drm/i915/gem/selftests/i915_gem_object.c   |    2 +-
+ drivers/gpu/drm/i915/gt/debugfs_engines.c          |    2 +-
+ drivers/gpu/drm/i915/gt/debugfs_gt.c               |   15 +-
+ drivers/gpu/drm/i915/gt/debugfs_gt.h               |    9 +-
+ drivers/gpu/drm/i915/gt/debugfs_gt_pm.c            |   10 +-
+ drivers/gpu/drm/i915/gt/intel_breadcrumbs.c        |    6 +-
+ drivers/gpu/drm/i915/gt/intel_context.c            |    5 +
+ drivers/gpu/drm/i915/gt/intel_engine.h             |    2 +
+ drivers/gpu/drm/i915/gt/intel_engine_cs.c          |  127 +-
+ drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c   |    2 +-
+ drivers/gpu/drm/i915/gt/intel_engine_pm.c          |    2 +-
+ drivers/gpu/drm/i915/gt/intel_engine_pm.h          |    6 +
+ drivers/gpu/drm/i915/gt/intel_engine_types.h       |   12 +
+ drivers/gpu/drm/i915/gt/intel_ggtt.c               |   52 +-
+ .../intel_ggtt_fencing.c}                          |  170 +-
+ .../intel_ggtt_fencing.h}                          |   17 +-
+ drivers/gpu/drm/i915/gt/intel_gt.c                 |    3 +-
+ drivers/gpu/drm/i915/gt/intel_gt_irq.c             |   15 +-
+ drivers/gpu/drm/i915/gt/intel_gt_pm.c              |    5 +-
+ drivers/gpu/drm/i915/gt/intel_gt_requests.c        |    2 +-
+ drivers/gpu/drm/i915/gt/intel_gtt.h                |    5 +-
+ drivers/gpu/drm/i915/gt/intel_lrc.c                |  252 +-
+ drivers/gpu/drm/i915/gt/intel_rc6.c                |   39 +-
+ drivers/gpu/drm/i915/gt/intel_renderstate.c        |    2 +-
+ drivers/gpu/drm/i915/gt/intel_reset.c              |   16 +-
+ drivers/gpu/drm/i915/gt/intel_ring.h               |    5 +-
+ drivers/gpu/drm/i915/gt/intel_ring_submission.c    |   33 +-
+ drivers/gpu/drm/i915/gt/intel_rps.c                |   96 +-
+ drivers/gpu/drm/i915/gt/intel_sseu.c               |   33 +-
+ drivers/gpu/drm/i915/gt/intel_timeline.c           |   12 +-
+ drivers/gpu/drm/i915/gt/intel_workarounds.c        |   21 +-
+ drivers/gpu/drm/i915/gt/selftest_gt_pm.c           |    2 +
+ drivers/gpu/drm/i915/gt/selftest_lrc.c             |  117 +-
+ drivers/gpu/drm/i915/gt/selftest_rc6.c             |   45 +-
+ drivers/gpu/drm/i915/gt/selftest_rps.c             |  223 ++
+ drivers/gpu/drm/i915/gt/selftest_rps.h             |   11 +
+ drivers/gpu/drm/i915/gt/uc/intel_guc.c             |   46 +-
+ drivers/gpu/drm/i915/gt/uc/intel_guc.h             |    7 +
+ drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.c     |   42 +
+ drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.h     |   14 +
+ drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c          |   14 -
+ drivers/gpu/drm/i915/gt/uc/intel_guc_fw.h          |    1 -
+ drivers/gpu/drm/i915/gt/uc/intel_guc_log.c         |   97 +-
+ drivers/gpu/drm/i915/gt/uc/intel_guc_log.h         |    4 +
+ drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.c |  124 +
+ drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.h |   15 +
+ drivers/gpu/drm/i915/gt/uc/intel_huc.c             |   53 +-
+ drivers/gpu/drm/i915/gt/uc/intel_huc.h             |    2 +
+ drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.c     |   36 +
+ drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.h     |   14 +
+ drivers/gpu/drm/i915/gt/uc/intel_huc_fw.c          |   17 -
+ drivers/gpu/drm/i915/gt/uc/intel_huc_fw.h          |    1 -
+ drivers/gpu/drm/i915/gt/uc/intel_uc.c              |   35 +-
+ drivers/gpu/drm/i915/gt/uc/intel_uc.h              |    1 +
+ drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.c      |   30 +
+ drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.h      |   14 +
+ drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c           |   56 +-
+ drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h           |    3 +-
+ drivers/gpu/drm/i915/gvt/aperture_gm.c             |    2 +-
+ drivers/gpu/drm/i915/i915_active.c                 |  137 +-
+ drivers/gpu/drm/i915/i915_active.h                 |   14 +-
+ drivers/gpu/drm/i915/i915_debugfs.c                |  306 +--
+ drivers/gpu/drm/i915/i915_debugfs.h                |    4 +-
+ drivers/gpu/drm/i915/i915_drv.c                    |   26 +-
+ drivers/gpu/drm/i915/i915_drv.h                    |   14 +-
+ drivers/gpu/drm/i915/i915_gem.c                    |   20 +-
+ drivers/gpu/drm/i915/i915_gem_evict.c              |    7 +-
+ drivers/gpu/drm/i915/i915_gpu_error.c              |    2 +-
+ drivers/gpu/drm/i915/i915_irq.c                    |    8 +-
+ drivers/gpu/drm/i915/i915_pci.c                    |   23 +-
+ drivers/gpu/drm/i915/i915_perf.c                   |  563 ++--
+ drivers/gpu/drm/i915/i915_perf_types.h             |   46 +-
+ drivers/gpu/drm/i915/i915_pmu.c                    |    4 +-
+ drivers/gpu/drm/i915/i915_reg.h                    |  130 +-
+ drivers/gpu/drm/i915/i915_request.c                |   29 +-
+ drivers/gpu/drm/i915/i915_request.h                |    2 +
+ drivers/gpu/drm/i915/i915_scheduler.c              |   10 +
+ drivers/gpu/drm/i915/i915_sw_fence.c               |    2 +-
+ drivers/gpu/drm/i915/i915_sw_fence_work.c          |    5 +-
+ drivers/gpu/drm/i915/i915_sw_fence_work.h          |   23 +
+ drivers/gpu/drm/i915/i915_switcheroo.c             |    4 +-
+ drivers/gpu/drm/i915/i915_utils.c                  |    3 +-
+ drivers/gpu/drm/i915/i915_vma.c                    |   93 +-
+ drivers/gpu/drm/i915/i915_vma.h                    |    4 +-
+ drivers/gpu/drm/i915/intel_device_info.c           |   41 +-
+ drivers/gpu/drm/i915/intel_device_info.h           |    1 +
+ drivers/gpu/drm/i915/intel_dram.c                  |    3 +-
+ drivers/gpu/drm/i915/intel_pm.c                    |   12 +-
+ drivers/gpu/drm/i915/intel_uncore.c                |   24 +-
+ drivers/gpu/drm/i915/intel_uncore.h                |    6 +-
+ drivers/gpu/drm/i915/intel_wakeref.c               |   12 +-
+ drivers/gpu/drm/i915/intel_wakeref.h               |   22 +-
+ drivers/gpu/drm/i915/intel_wopcm.c                 |   22 +-
+ drivers/gpu/drm/i915/oa/i915_oa_bdw.c              |   90 -
+ drivers/gpu/drm/i915/oa/i915_oa_bdw.h              |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_bxt.c              |   88 -
+ drivers/gpu/drm/i915/oa/i915_oa_bxt.h              |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_cflgt2.c           |   89 -
+ drivers/gpu/drm/i915/oa/i915_oa_cflgt2.h           |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_cflgt3.c           |   89 -
+ drivers/gpu/drm/i915/oa/i915_oa_cflgt3.h           |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_chv.c              |   89 -
+ drivers/gpu/drm/i915/oa/i915_oa_chv.h              |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_cnl.c              |  101 -
+ drivers/gpu/drm/i915/oa/i915_oa_cnl.h              |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_glk.c              |   88 -
+ drivers/gpu/drm/i915/oa/i915_oa_glk.h              |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_hsw.c              |  118 -
+ drivers/gpu/drm/i915/oa/i915_oa_hsw.h              |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_icl.c              |   98 -
+ drivers/gpu/drm/i915/oa/i915_oa_icl.h              |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_kblgt2.c           |   89 -
+ drivers/gpu/drm/i915/oa/i915_oa_kblgt2.h           |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_kblgt3.c           |   89 -
+ drivers/gpu/drm/i915/oa/i915_oa_kblgt3.h           |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_sklgt2.c           |   88 -
+ drivers/gpu/drm/i915/oa/i915_oa_sklgt2.h           |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_sklgt3.c           |   89 -
+ drivers/gpu/drm/i915/oa/i915_oa_sklgt3.h           |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_sklgt4.c           |   89 -
+ drivers/gpu/drm/i915/oa/i915_oa_sklgt4.h           |   16 -
+ drivers/gpu/drm/i915/oa/i915_oa_tgl.c              |  121 -
+ drivers/gpu/drm/i915/oa/i915_oa_tgl.h              |   16 -
+ drivers/gpu/drm/i915/selftests/i915_active.c       |   12 +-
+ drivers/gpu/drm/i915/selftests/i915_gem.c          |    2 -
+ drivers/gpu/drm/i915/selftests/i915_gem_evict.c    |   26 +-
+ drivers/gpu/drm/i915/selftests/i915_gem_gtt.c      |    1 -
+ drivers/gpu/drm/i915/selftests/i915_perf.c         |   98 +-
+ drivers/gpu/drm/i915/selftests/i915_request.c      |   16 +-
+ .../gpu/drm/i915/selftests/intel_memory_region.c   |    5 +-
+ drivers/gpu/drm/i915/selftests/mock_gem_device.c   |   38 +-
+ drivers/gpu/drm/imx/dw_hdmi-imx.c                  |    8 +-
+ drivers/gpu/drm/imx/imx-drm-core.c                 |   10 +-
+ drivers/gpu/drm/imx/imx-drm.h                      |    1 -
+ drivers/gpu/drm/imx/imx-ldb.c                      |    8 +-
+ drivers/gpu/drm/imx/imx-tve.c                      |    8 +-
+ drivers/gpu/drm/imx/parallel-display.c             |    8 +-
+ drivers/gpu/drm/ingenic/ingenic-drm.c              |   34 +-
+ drivers/gpu/drm/lima/Kconfig                       |    2 +
+ drivers/gpu/drm/lima/Makefile                      |    4 +-
+ drivers/gpu/drm/lima/lima_ctx.c                    |    3 +
+ drivers/gpu/drm/lima/lima_ctx.h                    |    5 +
+ drivers/gpu/drm/lima/lima_devfreq.c                |  234 ++
+ drivers/gpu/drm/lima/lima_devfreq.h                |   41 +
+ drivers/gpu/drm/lima/lima_device.c                 |   17 +
+ drivers/gpu/drm/lima/lima_device.h                 |   11 +
+ drivers/gpu/drm/lima/lima_drv.c                    |  112 +-
+ drivers/gpu/drm/lima/lima_drv.h                    |    1 +
+ drivers/gpu/drm/lima/lima_dump.h                   |   77 +
+ drivers/gpu/drm/lima/lima_sched.c                  |  142 +-
+ drivers/gpu/drm/lima/lima_sched.h                  |   11 +
+ drivers/gpu/drm/lima/lima_trace.c                  |    7 +
+ drivers/gpu/drm/lima/lima_trace.h                  |   50 +
+ drivers/gpu/drm/mcde/mcde_drv.c                    |   35 +-
+ drivers/gpu/drm/mediatek/mtk_dpi.c                 |   14 +-
+ drivers/gpu/drm/mediatek/mtk_drm_drv.c             |   13 +-
+ drivers/gpu/drm/mediatek/mtk_dsi.c                 |   14 +-
+ drivers/gpu/drm/meson/meson_drv.c                  |    5 +-
+ drivers/gpu/drm/mgag200/mgag200_drv.c              |    2 +
+ drivers/gpu/drm/mgag200/mgag200_main.c             |    4 -
+ drivers/gpu/drm/msm/adreno/a5xx_debugfs.c          |   18 +-
+ drivers/gpu/drm/msm/adreno/a5xx_gpu.h              |    2 +-
+ drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c           |   14 +-
+ drivers/gpu/drm/msm/msm_debugfs.c                  |   23 +-
+ drivers/gpu/drm/msm/msm_debugfs.h                  |    2 +-
+ drivers/gpu/drm/msm/msm_gpu.h                      |    2 +-
+ drivers/gpu/drm/nouveau/nouveau_debugfs.c          |    6 +-
+ drivers/gpu/drm/nouveau/nouveau_debugfs.h          |    8 +-
+ drivers/gpu/drm/nouveau/nvkm/subdev/therm/ic.c     |    4 +-
+ drivers/gpu/drm/omapdrm/omap_debugfs.c             |   29 +-
+ drivers/gpu/drm/omapdrm/omap_drv.h                 |    2 +-
+ drivers/gpu/drm/panel/Kconfig                      |   11 +
+ drivers/gpu/drm/panel/Makefile                     |    1 +
+ drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c     |   31 +
+ drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c |  691 +++++
+ drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c |    2 +-
+ drivers/gpu/drm/panel/panel-novatek-nt39016.c      |   46 +-
+ drivers/gpu/drm/panel/panel-simple.c               |   29 +
+ drivers/gpu/drm/pl111/pl111_debugfs.c              |    8 +-
+ drivers/gpu/drm/pl111/pl111_drm.h                  |    2 +-
+ drivers/gpu/drm/pl111/pl111_drv.c                  |   12 +-
+ drivers/gpu/drm/qxl/qxl_debugfs.c                  |   21 +-
+ drivers/gpu/drm/qxl/qxl_drv.c                      |    2 -
+ drivers/gpu/drm/qxl/qxl_drv.h                      |   13 +-
+ drivers/gpu/drm/qxl/qxl_kms.c                      |    4 +-
+ drivers/gpu/drm/qxl/qxl_ttm.c                      |    6 +-
+ drivers/gpu/drm/r128/ati_pcigart.c                 |    3 +-
+ drivers/gpu/drm/radeon/Makefile                    |   35 +-
+ drivers/gpu/drm/radeon/ci_dpm.c                    |   14 -
+ drivers/gpu/drm/radeon/radeon_atombios.c           |    4 +-
+ drivers/gpu/drm/radeon/radeon_combios.c            |    4 +-
+ drivers/gpu/drm/radeon/radeon_drv.c                |    2 +-
+ drivers/gpu/drm/radeon/si_dpm.c                    |   18 -
+ drivers/gpu/drm/rcar-du/rcar_du_drv.c              |    1 -
+ drivers/gpu/drm/rcar-du/rcar_du_encoder.c          |   14 +-
+ drivers/gpu/drm/rcar-du/rcar_du_kms.c              |    4 +-
+ drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    |    9 +-
+ drivers/gpu/drm/rockchip/cdn-dp-core.c             |    9 +-
+ drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c    |    8 +-
+ drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c        |    8 +-
+ drivers/gpu/drm/rockchip/inno_hdmi.c               |    8 +-
+ drivers/gpu/drm/rockchip/rk3066_hdmi.c             |    8 +-
+ drivers/gpu/drm/rockchip/rockchip_drm_drv.c        |   14 +-
+ drivers/gpu/drm/rockchip/rockchip_drm_drv.h        |    1 +
+ drivers/gpu/drm/rockchip/rockchip_drm_fb.c         |   43 +-
+ drivers/gpu/drm/rockchip/rockchip_drm_vop.c        |  137 +-
+ drivers/gpu/drm/rockchip/rockchip_drm_vop.h        |   17 +
+ drivers/gpu/drm/rockchip/rockchip_lvds.c           |   10 +-
+ drivers/gpu/drm/rockchip/rockchip_rgb.c            |    8 +-
+ drivers/gpu/drm/rockchip/rockchip_vop_reg.c        |   83 +-
+ drivers/gpu/drm/shmobile/shmob_drm_crtc.c          |   14 +-
+ drivers/gpu/drm/shmobile/shmob_drm_drv.c           |    2 -
+ drivers/gpu/drm/shmobile/shmob_drm_kms.c           |    6 +-
+ drivers/gpu/drm/sti/sti_compositor.c               |    6 +-
+ drivers/gpu/drm/sti/sti_compositor.h               |    4 +-
+ drivers/gpu/drm/sti/sti_crtc.c                     |    2 +-
+ drivers/gpu/drm/sti/sti_cursor.c                   |   14 +-
+ drivers/gpu/drm/sti/sti_drv.c                      |   16 +-
+ drivers/gpu/drm/sti/sti_dvo.c                      |   13 +-
+ drivers/gpu/drm/sti/sti_gdp.c                      |    7 +-
+ drivers/gpu/drm/sti/sti_hda.c                      |   13 +-
+ drivers/gpu/drm/sti/sti_hdmi.c                     |   13 +-
+ drivers/gpu/drm/sti/sti_hqvdp.c                    |   12 +-
+ drivers/gpu/drm/sti/sti_mixer.c                    |   10 +-
+ drivers/gpu/drm/sti/sti_mixer.h                    |    2 +-
+ drivers/gpu/drm/sti/sti_tvout.c                    |   13 +-
+ drivers/gpu/drm/sti/sti_vid.c                      |    8 +-
+ drivers/gpu/drm/sti/sti_vid.h                      |    2 +-
+ drivers/gpu/drm/stm/drv.c                          |   10 +-
+ drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c             |   12 +-
+ drivers/gpu/drm/sun4i/sun4i_lvds.c                 |   12 +-
+ drivers/gpu/drm/sun4i/sun4i_rgb.c                  |   17 +-
+ drivers/gpu/drm/sun4i/sun4i_tcon.c                 |    4 +-
+ drivers/gpu/drm/sun4i/sun4i_tv.c                   |   17 +-
+ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c             |   12 +-
+ drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c              |    8 +-
+ drivers/gpu/drm/sun4i/sun8i_mixer.c                |  111 +-
+ drivers/gpu/drm/sun4i/sun8i_mixer.h                |   10 +-
+ drivers/gpu/drm/sun4i/sun8i_ui_layer.c             |   14 +-
+ drivers/gpu/drm/sun4i/sun8i_vi_layer.c             |   40 +-
+ drivers/gpu/drm/tegra/dc.c                         |   11 +-
+ drivers/gpu/drm/tegra/dpaux.c                      |    2 -
+ drivers/gpu/drm/tegra/drm.c                        |    8 +-
+ drivers/gpu/drm/tegra/drm.h                        |    4 +-
+ drivers/gpu/drm/tegra/dsi.c                        |   21 +-
+ drivers/gpu/drm/tegra/fb.c                         |    2 +-
+ drivers/gpu/drm/tegra/hdmi.c                       |   21 +-
+ drivers/gpu/drm/tegra/output.c                     |    6 +-
+ drivers/gpu/drm/tegra/rgb.c                        |    8 +-
+ drivers/gpu/drm/tegra/sor.c                        |   20 +-
+ drivers/gpu/drm/tidss/tidss_drv.c                  |   10 +-
+ drivers/gpu/drm/tidss/tidss_encoder.c              |   22 +-
+ drivers/gpu/drm/tidss/tidss_kms.c                  |   19 +-
+ drivers/gpu/drm/tidss/tidss_kms.h                  |    1 -
+ drivers/gpu/drm/tilcdc/tilcdc_drv.c                |   20 +-
+ drivers/gpu/drm/tilcdc/tilcdc_external.c           |   10 +-
+ drivers/gpu/drm/tilcdc/tilcdc_panel.c              |    8 +-
+ drivers/gpu/drm/tiny/gm12u320.c                    |  226 +-
+ drivers/gpu/drm/tiny/hx8357d.c                     |    5 +-
+ drivers/gpu/drm/tiny/ili9225.c                     |    5 +-
+ drivers/gpu/drm/tiny/ili9341.c                     |    5 +-
+ drivers/gpu/drm/tiny/ili9486.c                     |    5 +-
+ drivers/gpu/drm/tiny/mi0283qt.c                    |    5 +-
+ drivers/gpu/drm/tiny/repaper.c                     |   18 +-
+ drivers/gpu/drm/tiny/st7586.c                      |    5 +-
+ drivers/gpu/drm/tiny/st7735r.c                     |    5 +-
+ drivers/gpu/drm/ttm/ttm_bo.c                       |    4 +-
+ drivers/gpu/drm/udl/udl_drv.c                      |   22 +-
+ drivers/gpu/drm/udl/udl_drv.h                      |    2 -
+ drivers/gpu/drm/udl/udl_main.c                     |   10 -
+ drivers/gpu/drm/udl/udl_modeset.c                  |   21 +-
+ drivers/gpu/drm/v3d/v3d_debugfs.c                  |    8 +-
+ drivers/gpu/drm/v3d/v3d_drv.c                      |   38 +-
+ drivers/gpu/drm/v3d/v3d_drv.h                      |    2 +-
+ drivers/gpu/drm/vboxvideo/vbox_drv.c               |    8 +-
+ drivers/gpu/drm/vc4/vc4_debugfs.c                  |   11 +-
+ drivers/gpu/drm/vc4/vc4_dpi.c                      |    8 +-
+ drivers/gpu/drm/vc4/vc4_drv.h                      |    2 +-
+ drivers/gpu/drm/vc4/vc4_dsi.c                      |   15 +-
+ drivers/gpu/drm/vc4/vc4_hdmi.c                     |   17 +-
+ drivers/gpu/drm/vc4/vc4_vec.c                      |    8 +-
+ drivers/gpu/drm/vgem/vgem_drv.c                    |   15 +-
+ drivers/gpu/drm/virtio/virtgpu_debugfs.c           |    3 +-
+ drivers/gpu/drm/virtio/virtgpu_display.c           |    8 +-
+ drivers/gpu/drm/virtio/virtgpu_drv.h               |   36 +-
+ drivers/gpu/drm/virtio/virtgpu_gem.c               |   13 +-
+ drivers/gpu/drm/virtio/virtgpu_ioctl.c             |    1 -
+ drivers/gpu/drm/virtio/virtgpu_object.c            |    7 +-
+ drivers/gpu/drm/virtio/virtgpu_vq.c                |    9 +-
+ drivers/gpu/drm/vkms/vkms_drv.c                    |   19 +-
+ drivers/gpu/drm/vkms/vkms_output.c                 |    8 +-
+ drivers/gpu/drm/xen/xen_drm_front.c                |    4 +-
+ drivers/gpu/drm/zte/zx_hdmi.c                      |    8 +-
+ drivers/gpu/drm/zte/zx_tvenc.c                     |    8 +-
+ drivers/gpu/drm/zte/zx_vga.c                       |    8 +-
+ drivers/video/fbdev/Kconfig                        |    2 +-
+ drivers/video/fbdev/arcfb.c                        |   10 +-
+ drivers/video/fbdev/atmel_lcdfb.c                  |    1 -
+ drivers/video/fbdev/aty/aty128fb.c                 |   14 -
+ drivers/video/fbdev/aty/atyfb_base.c               |    2 +-
+ drivers/video/fbdev/controlfb.c                    |  825 +++---
+ drivers/video/fbdev/core/fbmon.c                   |    2 +-
+ drivers/video/fbdev/cyber2000fb.c                  |    2 +
+ drivers/video/fbdev/imxfb.c                        |   27 +-
+ drivers/video/fbdev/matrox/g450_pll.c              |   22 -
+ drivers/video/fbdev/matrox/matroxfb_base.h         |    2 +-
+ drivers/video/fbdev/mb862xx/mb862xxfb_accel.c      |    2 -
+ drivers/video/fbdev/mx3fb.c                        |   20 +-
+ drivers/video/fbdev/omap/omapfb_main.c             |   14 +-
+ drivers/video/fbdev/omap2/omapfb/dss/dispc.c       |  114 -
+ drivers/video/fbdev/omap2/omapfb/dss/dss.h         |   20 -
+ drivers/video/fbdev/omap2/omapfb/dss/venc.c        |   43 -
+ drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c    |    8 +-
+ drivers/video/fbdev/pm2fb.c                        |    2 +-
+ drivers/video/fbdev/pm3fb.c                        |    8 +-
+ drivers/video/fbdev/s1d13xxxfb.c                   |   14 +-
+ drivers/video/fbdev/sa1100fb.c                     |   20 +-
+ drivers/video/fbdev/sa1100fb.h                     |    3 +
+ drivers/video/fbdev/savage/savagefb.h              |    2 +-
+ drivers/video/fbdev/ssd1307fb.c                    |  102 +-
+ drivers/video/fbdev/uvesafb.c                      |    2 +-
+ drivers/video/fbdev/vesafb.c                       |   16 +-
+ drivers/video/fbdev/via/debug.h                    |    6 +-
+ drivers/video/fbdev/via/viafbdev.c                 |    2 +-
+ drivers/video/fbdev/vt8500lcdfb.c                  |    1 +
+ include/drm/drm_client.h                           |    2 +-
+ include/drm/drm_connector.h                        |    4 +-
+ include/drm/drm_debugfs.h                          |   16 +-
+ include/drm/drm_device.h                           |   24 +-
+ include/drm/drm_displayid.h                        |    2 +-
+ include/drm/drm_dp_helper.h                        |  170 +-
+ include/drm/drm_dp_mst_helper.h                    |   72 +-
+ include/drm/drm_drv.h                              |   11 +-
+ include/drm/drm_encoder.h                          |    8 +-
+ include/drm/drm_fb_helper.h                        |    6 +-
+ include/drm/drm_file.h                             |   11 +
+ include/drm/drm_framebuffer.h                      |   38 +
+ include/drm/drm_gem_framebuffer_helper.h           |   15 +
+ include/drm/drm_gem_vram_helper.h                  |    2 +-
+ include/drm/drm_legacy.h                           |   15 +
+ include/drm/drm_managed.h                          |  109 +
+ include/drm/drm_mipi_dbi.h                         |    8 +-
+ include/drm/drm_mode_config.h                      |   18 +-
+ include/drm/drm_modeset_helper_vtables.h           |   27 +
+ include/drm/drm_pci.h                              |   63 -
+ include/drm/drm_print.h                            |    6 +
+ include/drm/drm_writeback.h                        |    9 +
+ include/drm/gpu_scheduler.h                        |    1 +
+ include/drm/i915_pciids.h                          |    8 +-
+ include/drm/ttm/ttm_debug.h                        |   31 -
+ include/linux/dma-buf.h                            |   10 +
+ include/uapi/drm/i915_drm.h                        |   24 +
+ mm/slob.c                                          |    2 +
+ mm/slub.c                                          |    2 +
+ 839 files changed, 23767 insertions(+), 12657 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/lg,lg4573.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2587-53ts.txt
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
+ create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/simple-panel.txt
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml
+ create mode 100644 Documentation/devicetree/bindings/display/panel/tpo,td.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt
+ create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
+ delete mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+ create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+ create mode 100644 drivers/dma-buf/st-dma-fence-chain.c
+ create mode 100644 drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c
+ create mode 100644 drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.h
+ mode change 100644 => 100755 drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
+ mode change 100644 => 100755 drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c
+ create mode 100644 drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c
+ create mode 100644 drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.h
+ create mode 100644 drivers/gpu/drm/amd/display/dc/dce/dmub_abm.c
+ rename drivers/gpu/drm/amd/display/dc/{basics/log_helpers.c => dce/dmub_abm.h} (75%)
+ create mode 100644 drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h
+ create mode 100644 drivers/gpu/drm/amd/include/asic_reg/pwr/pwr_10_0_offset.h
+ create mode 100644 drivers/gpu/drm/amd/include/asic_reg/pwr/pwr_10_0_sh_mask.h
+ create mode 100644 drivers/gpu/drm/amd/include/asic_reg/smuio/smuio_12_0_0_offset.h
+ create mode 100644 drivers/gpu/drm/amd/include/asic_reg/smuio/smuio_12_0_0_sh_mask.h
+ create mode 100644 drivers/gpu/drm/bridge/nwl-dsi.c
+ create mode 100644 drivers/gpu/drm/bridge/nwl-dsi.h
+ create mode 100644 drivers/gpu/drm/drm_managed.c
+ delete mode 100644 drivers/gpu/drm/drm_vram_helper_common.c
+ rename drivers/gpu/drm/i915/{i915_gem_fence_reg.c => gt/intel_ggtt_fencing.c} (88%)
+ rename drivers/gpu/drm/i915/{i915_gem_fence_reg.h => gt/intel_ggtt_fencing.h} (86%)
+ create mode 100644 drivers/gpu/drm/i915/gt/selftest_rps.c
+ create mode 100644 drivers/gpu/drm/i915/gt/selftest_rps.h
+ create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.c
+ create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.h
+ create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.c
+ create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.h
+ create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.c
+ create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.h
+ create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.c
+ create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_bdw.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_bdw.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_bxt.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_bxt.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_cflgt2.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_cflgt2.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_cflgt3.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_cflgt3.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_chv.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_chv.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_cnl.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_cnl.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_glk.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_glk.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_hsw.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_hsw.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_icl.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_icl.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_kblgt2.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_kblgt2.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_kblgt3.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_kblgt3.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_sklgt2.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_sklgt2.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_sklgt3.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_sklgt3.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_sklgt4.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_sklgt4.h
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_tgl.c
+ delete mode 100644 drivers/gpu/drm/i915/oa/i915_oa_tgl.h
+ create mode 100644 drivers/gpu/drm/lima/lima_devfreq.c
+ create mode 100644 drivers/gpu/drm/lima/lima_devfreq.h
+ create mode 100644 drivers/gpu/drm/lima/lima_dump.h
+ create mode 100644 drivers/gpu/drm/lima/lima_trace.c
+ create mode 100644 drivers/gpu/drm/lima/lima_trace.h
+ create mode 100644 drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
+ create mode 100644 include/drm/drm_managed.h
+ delete mode 100644 include/drm/drm_pci.h
+ delete mode 100644 include/drm/ttm/ttm_debug.h
+Merging amdgpu/drm-next (d2995eb57efa drm/amdgpu: re-enable runtime pm on vega10)
+$ git merge amdgpu/drm-next
+Auto-merging drivers/pci/p2pdma.c
+Auto-merging drivers/gpu/drm/ttm/ttm_bo.c
+Auto-merging drivers/gpu/drm/amd/powerplay/smu_v11_0.c
+Auto-merging drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+Auto-merging drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+Auto-merging drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
+Auto-merging drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h
+Auto-merging drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+Auto-merging drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+Auto-merging drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
+Merge made by the 'recursive' strategy.
+ drivers/gpu/drm/amd/amdgpu/amdgpu.h                |  21 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c         |   7 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h         |   1 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_benchmark.c      |   2 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c             |   3 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         |  11 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c            |  22 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c          |  10 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c            |   8 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c            |  22 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c            |  35 +++
+ drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.h            |   4 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c             |  95 +++---
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c            |   6 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_job.h            |   1 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c            |   1 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_object.c         |   2 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_object.h         |  11 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c             |  48 +--
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h           |  22 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.h           |   5 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c           |   5 +
+ drivers/gpu/drm/amd/amdgpu/amdgpu_test.c           |   6 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c            | 324 ++++++++++++---------
+ drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h            |   8 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c            |   4 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c            |   5 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c           |   8 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c             |  91 +++---
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h             |  20 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c         |   2 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c        |  30 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c           |   4 +-
+ drivers/gpu/drm/amd/amdgpu/cik_sdma.c              |   3 +-
+ drivers/gpu/drm/amd/amdgpu/cikd.h                  |   2 +-
+ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c             |  51 +++-
+ drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c              |  17 +-
+ drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c              |  31 +-
+ drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c              |  33 ++-
+ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |  51 +++-
+ drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c             |  11 +-
+ drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c              |   8 +-
+ drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h              |   2 +-
+ drivers/gpu/drm/amd/amdgpu/mxgpu_nv.h              |   2 +-
+ drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h  |  16 +
+ drivers/gpu/drm/amd/amdgpu/nv.c                    |   3 +-
+ drivers/gpu/drm/amd/amdgpu/nvd.h                   |  49 ++++
+ drivers/gpu/drm/amd/amdgpu/psp_v11_0.c             |   2 +
+ drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c             |   3 +-
+ drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c             |   3 +-
+ drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c             |   7 +-
+ drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c             |  20 +-
+ drivers/gpu/drm/amd/amdgpu/si_dma.c                |   3 +-
+ drivers/gpu/drm/amd/amdgpu/soc15_common.h          |   3 +
+ drivers/gpu/drm/amd/amdgpu/soc15d.h                |  26 +-
+ drivers/gpu/drm/amd/amdgpu/umc_v6_1.c              | 112 ++++++-
+ drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c              |   6 +-
+ drivers/gpu/drm/amd/amdgpu/vid.h                   |   2 +-
+ drivers/gpu/drm/amd/amdkfd/kfd_chardev.c           |  42 +++
+ drivers/gpu/drm/amd/amdkfd/kfd_device.c            |  40 ++-
+ .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c  |  43 ++-
+ .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.h  |   1 +
+ drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c      |   1 +
+ drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c    |   6 +-
+ drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c |   2 +-
+ drivers/gpu/drm/amd/amdkfd/kfd_priv.h              |  16 +
+ drivers/gpu/drm/amd/amdkfd/kfd_process.c           |   1 +
+ .../gpu/drm/amd/amdkfd/kfd_process_queue_manager.c |   9 +
+ drivers/gpu/drm/amd/amdkfd/kfd_topology.c          |   6 +-
+ drivers/gpu/drm/amd/amdkfd/kfd_topology.h          |   5 +-
+ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  29 +-
+ .../drm/amd/display/amdgpu_dm/amdgpu_dm_color.c    |   7 +-
+ .../gpu/drm/amd/display/dc/bios/command_table2.c   |  62 ++--
+ drivers/gpu/drm/amd/display/dc/core/dc.c           |   8 +-
+ drivers/gpu/drm/amd/display/dc/core/dc_link.c      |  36 +--
+ drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c  |   2 +-
+ drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   |   2 +-
+ drivers/gpu/drm/amd/display/dc/core/dc_resource.c  |   4 +-
+ drivers/gpu/drm/amd/display/dc/core/dc_stream.c    |  40 +--
+ drivers/gpu/drm/amd/display/dc/dc.h                |  48 ++-
+ drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c       |   2 +-
+ drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h       |   5 +-
+ drivers/gpu/drm/amd/display/dc/dc_helper.c         |   6 +-
+ drivers/gpu/drm/amd/display/dc/dce/dce_abm.c       |  15 +-
+ drivers/gpu/drm/amd/display/dc/dce/dmub_abm.c      |  28 +-
+ drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c      |  12 +-
+ .../amd/display/dc/dce110/dce110_hw_sequencer.c    |  35 ++-
+ .../amd/display/dc/dce110/dce110_hw_sequencer.h    |   4 +
+ .../drm/amd/display/dc/dce110/dce110_opp_csc_v.c   |   3 +-
+ .../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c  |  19 +-
+ .../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h  |   1 +
+ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_init.c  |   2 +
+ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c   |  15 +
+ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.h   |  20 +-
+ .../gpu/drm/amd/display/dc/dcn10/dcn10_resource.c  |  48 ++-
+ drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c |  12 +-
+ drivers/gpu/drm/amd/display/dc/dcn20/dcn20_init.c  |   2 +
+ drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.c   |   3 +-
+ drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.h   |   3 +-
+ .../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c  |  71 ++++-
+ .../gpu/drm/amd/display/dc/dcn20/dcn20_resource.h  |   2 +-
+ drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c  |  33 ++-
+ drivers/gpu/drm/amd/display/dc/dcn21/dcn21_init.c  |   2 +
+ .../gpu/drm/amd/display/dc/dcn21/dcn21_resource.c  | 112 ++++---
+ .../drm/amd/display/dc/dml/display_mode_structs.h  |   1 +
+ .../gpu/drm/amd/display/dc/dml/display_mode_vba.c  |   1 +
+ .../gpu/drm/amd/display/dc/dml/display_mode_vba.h  |   1 +
+ drivers/gpu/drm/amd/display/dc/inc/hw/abm.h        |   5 +-
+ drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h        |  16 +
+ drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h  |   5 +
+ drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h    |   6 +-
+ drivers/gpu/drm/amd/display/dmub/inc/dmub_rb.h     |   6 +-
+ drivers/gpu/drm/amd/display/dmub/inc/dmub_srv.h    |   3 +-
+ drivers/gpu/drm/amd/display/dmub/inc/dmub_types.h  |  11 +
+ drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c    |  10 +-
+ .../drm/amd/display/modules/color/color_gamma.c    |  31 +-
+ .../drm/amd/display/modules/color/color_gamma.h    |   4 +-
+ drivers/gpu/drm/amd/powerplay/amd_powerplay.c      |   9 +-
+ drivers/gpu/drm/amd/powerplay/amdgpu_smu.c         |  26 +-
+ drivers/gpu/drm/amd/powerplay/navi10_ppt.c         |   6 +-
+ drivers/gpu/drm/amd/powerplay/smu_v11_0.c          |  49 +++-
+ drivers/gpu/drm/ttm/ttm_bo.c                       |   2 +-
+ include/uapi/drm/amdgpu_drm.h                      |  19 +-
+ include/uapi/linux/kfd_ioctl.h                     |  19 +-
+ 124 files changed, 1754 insertions(+), 651 deletions(-)
+Merging drm-intel/for-linux-next (de3b4d9361c8 drm/i915/gt: Restore aggressive post-boost downclocking)
+$ git merge drm-intel/for-linux-next
+Auto-merging drivers/gpu/drm/i915/i915_vma.c
+Auto-merging drivers/gpu/drm/i915/i915_reg.h
+Auto-merging drivers/gpu/drm/i915/i915_gpu_error.h
+Auto-merging drivers/gpu/drm/i915/i915_drv.c
+Auto-merging drivers/gpu/drm/i915/i915_debugfs.c
+Auto-merging drivers/gpu/drm/i915/gt/intel_timeline.c
+Auto-merging drivers/gpu/drm/i915/gt/intel_lrc.c
+Auto-merging drivers/gpu/drm/i915/gem/selftests/huge_pages.c
+Auto-merging drivers/gpu/drm/i915/display/intel_dp_mst.c
+Auto-merging drivers/gpu/drm/i915/display/intel_dp.c
+Auto-merging drivers/gpu/drm/i915/display/intel_display_types.h
+Auto-merging drivers/gpu/drm/i915/display/intel_display_debugfs.c
+Auto-merging drivers/gpu/drm/i915/display/intel_ddi.c
+CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/display/intel_ddi.c
+Resolved 'drivers/gpu/drm/i915/display/intel_ddi.c' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+[master d6b93d0a6b40] Merge remote-tracking branch 'drm-intel/for-linux-next'
+$ git diff -M --stat --summary HEAD^..
+ drivers/char/agp/intel-gtt.c                       |   17 +-
+ drivers/gpu/drm/i915/Makefile                      |    6 +-
+ drivers/gpu/drm/i915/display/icl_dsi.c             |   21 +-
+ drivers/gpu/drm/i915/display/intel_atomic_plane.c  |    4 +-
+ drivers/gpu/drm/i915/display/intel_audio.c         |  145 +++
+ drivers/gpu/drm/i915/display/intel_bw.c            |   24 +-
+ drivers/gpu/drm/i915/display/intel_bw.h            |    9 +
+ drivers/gpu/drm/i915/display/intel_connector.c     |    3 +
+ drivers/gpu/drm/i915/display/intel_crt.c           |    4 +-
+ drivers/gpu/drm/i915/display/intel_ddi.c           |  230 ++--
+ drivers/gpu/drm/i915/display/intel_ddi.h           |    6 +-
+ drivers/gpu/drm/i915/display/intel_display.c       |  374 ++++---
+ drivers/gpu/drm/i915/display/intel_display.h       |    3 +-
+ .../gpu/drm/i915/display/intel_display_debugfs.c   |  100 ++
+ drivers/gpu/drm/i915/display/intel_display_power.c |  534 ++++-----
+ drivers/gpu/drm/i915/display/intel_display_power.h |    5 +-
+ drivers/gpu/drm/i915/display/intel_display_types.h |    6 +-
+ drivers/gpu/drm/i915/display/intel_dp.c            |  603 ++++++-----
+ drivers/gpu/drm/i915/display/intel_dp_mst.c        |    4 +-
+ drivers/gpu/drm/i915/display/intel_dpll_mgr.c      |    8 +-
+ drivers/gpu/drm/i915/display/intel_dsb.c           |    6 +-
+ drivers/gpu/drm/i915/display/intel_dsi_vbt.c       |    2 +-
+ drivers/gpu/drm/i915/display/intel_fbc.c           |    5 +-
+ drivers/gpu/drm/i915/display/intel_frontbuffer.c   |    6 +-
+ drivers/gpu/drm/i915/display/intel_global_state.c  |    4 +-
+ drivers/gpu/drm/i915/display/intel_gmbus.c         |    3 +-
+ drivers/gpu/drm/i915/display/intel_hdcp.c          |   23 +-
+ drivers/gpu/drm/i915/display/intel_hdmi.c          |   56 +-
+ drivers/gpu/drm/i915/display/intel_lvds.c          |   16 +-
+ drivers/gpu/drm/i915/display/intel_overlay.c       |    6 +-
+ drivers/gpu/drm/i915/display/intel_panel.c         |  140 +--
+ drivers/gpu/drm/i915/display/intel_panel.h         |   10 +-
+ drivers/gpu/drm/i915/display/intel_tc.c            |   95 +-
+ drivers/gpu/drm/i915/display/vlv_dsi.c             |   11 +-
+ drivers/gpu/drm/i915/gem/i915_gem_context.c        |    4 +-
+ drivers/gpu/drm/i915/gem/i915_gem_domain.c         |    7 +-
+ drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c     |    2 +-
+ drivers/gpu/drm/i915/gem/i915_gem_object.c         |    4 +-
+ drivers/gpu/drm/i915/gem/selftests/huge_pages.c    |   83 +-
+ .../gpu/drm/i915/gem/selftests/i915_gem_context.c  |    1 -
+ drivers/gpu/drm/i915/gt/debugfs_gt_pm.c            |   64 +-
+ drivers/gpu/drm/i915/gt/intel_context_sseu.c       |    3 +-
+ drivers/gpu/drm/i915/gt/intel_context_types.h      |   10 +-
+ drivers/gpu/drm/i915/gt/intel_engine.h             |    3 -
+ drivers/gpu/drm/i915/gt/intel_engine_cs.c          |   82 +-
+ drivers/gpu/drm/i915/gt/intel_engine_pm.c          |   10 +-
+ drivers/gpu/drm/i915/gt/intel_engine_types.h       |   41 +-
+ drivers/gpu/drm/i915/gt/intel_ggtt.c               |   15 -
+ drivers/gpu/drm/i915/gt/intel_gpu_commands.h       |    3 +-
+ drivers/gpu/drm/i915/gt/intel_gt.c                 |   63 +-
+ drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c     |  102 ++
+ drivers/gpu/drm/i915/gt/intel_gt_clock_utils.h     |   27 +
+ drivers/gpu/drm/i915/gt/intel_gt_pm.c              |   10 +-
+ drivers/gpu/drm/i915/gt/intel_gt_requests.c        |   20 +-
+ drivers/gpu/drm/i915/gt/intel_gt_types.h           |    9 +-
+ drivers/gpu/drm/i915/gt/intel_lrc.c                |  703 ++++++++----
+ drivers/gpu/drm/i915/gt/intel_lrc.h                |    1 +
+ drivers/gpu/drm/i915/gt/intel_lrc_reg.h            |    6 +-
+ drivers/gpu/drm/i915/gt/intel_renderstate.c        |    4 +-
+ drivers/gpu/drm/i915/gt/intel_ring_submission.c    |   16 +-
+ drivers/gpu/drm/i915/gt/intel_rps.c                |  350 ++++--
+ drivers/gpu/drm/i915/gt/intel_rps.h                |   60 ++
+ drivers/gpu/drm/i915/gt/intel_rps_types.h          |   14 +-
+ drivers/gpu/drm/i915/gt/intel_timeline.c           |   17 +-
+ drivers/gpu/drm/i915/gt/intel_timeline.h           |    2 +
+ drivers/gpu/drm/i915/gt/selftest_context.c         |    2 +-
+ drivers/gpu/drm/i915/gt/selftest_gt_pm.c           |    6 +
+ drivers/gpu/drm/i915/gt/selftest_lrc.c             |  534 ++++++++-
+ drivers/gpu/drm/i915/gt/selftest_rc6.c             |   25 +-
+ drivers/gpu/drm/i915/gt/selftest_rps.c             | 1134 +++++++++++++++++++-
+ drivers/gpu/drm/i915/gt/selftest_rps.h             |    6 +
+ drivers/gpu/drm/i915/gt/shmem_utils.c              |  173 +++
+ drivers/gpu/drm/i915/gt/shmem_utils.h              |   23 +
+ drivers/gpu/drm/i915/gt/st_shmem_utils.c           |   63 ++
+ drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c  |    2 +-
+ drivers/gpu/drm/i915/gvt/scheduler.c               |    9 +-
+ drivers/gpu/drm/i915/i915_debugfs.c                |   39 +-
+ drivers/gpu/drm/i915/i915_drv.c                    |  119 +-
+ drivers/gpu/drm/i915/i915_gpu_error.c              |   43 +-
+ drivers/gpu/drm/i915/i915_gpu_error.h              |    1 -
+ drivers/gpu/drm/i915/i915_pci.c                    |   14 +
+ drivers/gpu/drm/i915/i915_perf.c                   |    8 +-
+ drivers/gpu/drm/i915/i915_pmu.c                    |   32 +-
+ drivers/gpu/drm/i915/i915_reg.h                    |   48 +-
+ drivers/gpu/drm/i915/i915_vma.c                    |   28 +-
+ drivers/gpu/drm/i915/intel_device_info.c           |    1 +
+ drivers/gpu/drm/i915/intel_device_info.h           |    2 +
+ drivers/gpu/drm/i915/intel_pm.c                    |   88 +-
+ drivers/gpu/drm/i915/intel_pm.h                    |    2 +
+ drivers/gpu/drm/i915/intel_sideband.c              |    4 +-
+ drivers/gpu/drm/i915/intel_uncore.c                |   31 +-
+ drivers/gpu/drm/i915/intel_wopcm.c                 |   22 +-
+ drivers/gpu/drm/i915/selftests/i915_gem_gtt.c      |   32 +-
+ .../gpu/drm/i915/selftests/i915_mock_selftests.h   |    1 +
+ .../gpu/drm/i915/selftests/i915_perf_selftests.h   |    1 +
+ drivers/gpu/drm/i915/selftests/i915_request.c      |  572 +++++++++-
+ drivers/gpu/drm/i915/selftests/i915_vma.c          |    2 +-
+ drivers/gpu/drm/i915/selftests/librapl.c           |   24 +
+ drivers/gpu/drm/i915/selftests/librapl.h           |   13 +
+ 99 files changed, 5428 insertions(+), 1901 deletions(-)
+ create mode 100644 drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
+ create mode 100644 drivers/gpu/drm/i915/gt/intel_gt_clock_utils.h
+ create mode 100644 drivers/gpu/drm/i915/gt/shmem_utils.c
+ create mode 100644 drivers/gpu/drm/i915/gt/shmem_utils.h
+ create mode 100644 drivers/gpu/drm/i915/gt/st_shmem_utils.c
+ create mode 100644 drivers/gpu/drm/i915/selftests/librapl.c
+ create mode 100644 drivers/gpu/drm/i915/selftests/librapl.h
+Merging drm-tegra/drm/tegra/for-next (757338371608 drm/tegra: Clean up GPIO includes)
+$ git merge drm-tegra/drm/tegra/for-next
+Auto-merging drivers/gpu/drm/tegra/sor.c
+Auto-merging drivers/gpu/drm/tegra/hdmi.c
+Auto-merging drivers/gpu/drm/tegra/drm.h
+Auto-merging drivers/gpu/drm/tegra/drm.c
+Merge made by the 'recursive' strategy.
+ drivers/gpu/drm/tegra/drm.c |  3 ++-
+ drivers/gpu/host1x/dev.c    | 59 ++++++++++++++++++++++++++++++++++++++++++---
+ include/linux/host1x.h      |  3 +++
+ 3 files changed, 60 insertions(+), 5 deletions(-)
+Merging drm-misc/for-linux-next (78b0d99a68ec drm/bridge: fix stack usage warning on old gcc)
+$ git merge drm-misc/for-linux-next
+Auto-merging drivers/gpu/drm/tidss/tidss_plane.c
+Auto-merging drivers/gpu/drm/tidss/tidss_crtc.c
+Auto-merging drivers/gpu/drm/qxl/qxl_ioctl.c
+Auto-merging drivers/gpu/drm/qxl/qxl_display.c
+Removing drivers/gpu/drm/pl111/pl111_vexpress.h
+Removing drivers/gpu/drm/pl111/pl111_vexpress.c
+Auto-merging drivers/gpu/drm/i915/i915_pci.c
+Auto-merging drivers/gpu/drm/i915/i915_drv.c
+Auto-merging drivers/gpu/drm/i915/display/intel_display.c
+Auto-merging drivers/gpu/drm/drm_edid.c
+Auto-merging drivers/gpu/drm/drm_dp_mst_topology.c
+Removing drivers/gpu/drm/cirrus/Makefile
+Removing drivers/gpu/drm/cirrus/Kconfig
+Auto-merging drivers/gpu/drm/Kconfig
+Auto-merging MAINTAINERS
+CONFLICT (content): Merge conflict in MAINTAINERS
+Auto-merging Documentation/devicetree/bindings/vendor-prefixes.yaml
+Recorded preimage for 'MAINTAINERS'
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+Recorded resolution for 'MAINTAINERS'.
+[master f17364ed2442] Merge remote-tracking branch 'drm-misc/for-linux-next'
+$ git diff -M --stat --summary HEAD^..
+ .../bindings/display/panel/panel-simple-dsi.yaml   |   2 +
+ .../bindings/display/panel/panel-simple.yaml       |  12 ++
+ .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
+ Documentation/gpu/todo.rst                         |  12 --
+ MAINTAINERS                                        |   2 +-
+ drivers/gpu/drm/Kconfig                            |   2 -
+ drivers/gpu/drm/Makefile                           |   1 -
+ drivers/gpu/drm/arm/display/komeda/komeda_kms.c    |  16 +-
+ drivers/gpu/drm/aspeed/aspeed_gfx.h                |   3 +-
+ drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c           |   2 +-
+ drivers/gpu/drm/aspeed/aspeed_gfx_drv.c            |  31 ++-
+ drivers/gpu/drm/aspeed/aspeed_gfx_out.c            |   2 +-
+ drivers/gpu/drm/ast/ast_mode.c                     |   3 -
+ drivers/gpu/drm/bochs/bochs_kms.c                  |   1 -
+ drivers/gpu/drm/bridge/panel.c                     |   6 +-
+ drivers/gpu/drm/bridge/parade-ps8640.c             |   2 -
+ drivers/gpu/drm/bridge/tc358768.c                  |   4 +-
+ drivers/gpu/drm/cirrus/Kconfig                     |  19 --
+ drivers/gpu/drm/cirrus/Makefile                    |   2 -
+ drivers/gpu/drm/drm_dp_mst_topology.c              | 137 ++++---------
+ drivers/gpu/drm/drm_drv.c                          |  23 +++
+ drivers/gpu/drm/drm_edid.c                         |   8 +
+ drivers/gpu/drm/drm_file.c                         |   6 +-
+ drivers/gpu/drm/drm_modes.c                        |  26 ---
+ drivers/gpu/drm/i915/display/intel_display.c       |   1 -
+ drivers/gpu/drm/i915/i915_drv.c                    |  17 +-
+ drivers/gpu/drm/i915/i915_pci.c                    |   2 -
+ drivers/gpu/drm/ingenic/ingenic-drm.c              |  15 +-
+ drivers/gpu/drm/lima/lima_bcast.c                  |  25 ++-
+ drivers/gpu/drm/lima/lima_bcast.h                  |   2 +
+ drivers/gpu/drm/lima/lima_devfreq.c                |  31 ++-
+ drivers/gpu/drm/lima/lima_devfreq.h                |   3 +
+ drivers/gpu/drm/lima/lima_device.c                 | 211 +++++++++++++++++----
+ drivers/gpu/drm/lima/lima_device.h                 |   6 +-
+ drivers/gpu/drm/lima/lima_dlbu.c                   |  17 +-
+ drivers/gpu/drm/lima/lima_dlbu.h                   |   2 +
+ drivers/gpu/drm/lima/lima_drv.c                    |  41 ++--
+ drivers/gpu/drm/lima/lima_gp.c                     |  21 +-
+ drivers/gpu/drm/lima/lima_gp.h                     |   2 +
+ drivers/gpu/drm/lima/lima_l2_cache.c               |  38 +++-
+ drivers/gpu/drm/lima/lima_l2_cache.h               |   2 +
+ drivers/gpu/drm/lima/lima_mmu.c                    |  49 +++--
+ drivers/gpu/drm/lima/lima_mmu.h                    |   2 +
+ drivers/gpu/drm/lima/lima_pmu.c                    |  77 +++++++-
+ drivers/gpu/drm/lima/lima_pmu.h                    |   2 +
+ drivers/gpu/drm/lima/lima_pp.c                     |  31 ++-
+ drivers/gpu/drm/lima/lima_pp.h                     |   4 +
+ drivers/gpu/drm/lima/lima_sched.c                  |  63 ++++--
+ drivers/gpu/drm/lima/lima_vm.h                     |   3 +-
+ drivers/gpu/drm/mcde/mcde_display.c                |  10 +-
+ drivers/gpu/drm/mcde/mcde_drm.h                    |   2 +
+ drivers/gpu/drm/mcde/mcde_drv.c                    |  21 +-
+ drivers/gpu/drm/mcde/mcde_dsi.c                    |   2 +-
+ drivers/gpu/drm/meson/meson_plane.c                |   2 +-
+ drivers/gpu/drm/omapdrm/dss/venc.c                 |  43 -----
+ drivers/gpu/drm/panel/panel-ilitek-ili9322.c       |   4 +-
+ drivers/gpu/drm/panel/panel-simple.c               | 157 +++++++++++++++
+ drivers/gpu/drm/panel/panel-truly-nt35597.c        |   2 -
+ drivers/gpu/drm/pl111/Makefile                     |   1 -
+ drivers/gpu/drm/pl111/pl111_drv.c                  |   1 +
+ drivers/gpu/drm/pl111/pl111_versatile.c            | 148 +++++++++++----
+ drivers/gpu/drm/pl111/pl111_vexpress.c             | 138 --------------
+ drivers/gpu/drm/pl111/pl111_vexpress.h             |  29 ---
+ drivers/gpu/drm/qxl/qxl_debugfs.c                  |   7 +-
+ drivers/gpu/drm/qxl/qxl_display.c                  |  32 ++--
+ drivers/gpu/drm/qxl/qxl_drv.c                      |  23 +--
+ drivers/gpu/drm/qxl/qxl_drv.h                      |   7 +-
+ drivers/gpu/drm/qxl/qxl_dumb.c                     |   2 +-
+ drivers/gpu/drm/qxl/qxl_gem.c                      |   2 +-
+ drivers/gpu/drm/qxl/qxl_ioctl.c                    |  14 +-
+ drivers/gpu/drm/qxl/qxl_irq.c                      |   2 +-
+ drivers/gpu/drm/qxl/qxl_kms.c                      |  13 +-
+ drivers/gpu/drm/qxl/qxl_object.c                   |   2 +-
+ drivers/gpu/drm/qxl/qxl_release.c                  |   2 +-
+ drivers/gpu/drm/qxl/qxl_ttm.c                      |   2 +-
+ drivers/gpu/drm/rockchip/cdn-dp-core.c             |   4 +-
+ drivers/gpu/drm/rockchip/cdn-dp-reg.c              |   6 +-
+ drivers/gpu/drm/stm/ltdc.c                         | 102 +++++-----
+ drivers/gpu/drm/tidss/tidss_crtc.c                 |  16 +-
+ drivers/gpu/drm/tidss/tidss_drv.c                  |  17 +-
+ drivers/gpu/drm/tidss/tidss_drv.h                  |   4 +-
+ drivers/gpu/drm/tidss/tidss_irq.c                  |  12 +-
+ drivers/gpu/drm/tidss/tidss_kms.c                  |   2 +-
+ drivers/gpu/drm/tidss/tidss_plane.c                |   6 +-
+ drivers/gpu/drm/tiny/Kconfig                       |  19 ++
+ drivers/gpu/drm/tiny/Makefile                      |   1 +
+ drivers/gpu/drm/{cirrus => tiny}/cirrus.c          |  22 +--
+ drivers/gpu/drm/tiny/gm12u320.c                    |  24 +--
+ drivers/gpu/drm/tiny/hx8357d.c                     |  13 +-
+ drivers/gpu/drm/tiny/ili9225.c                     |  13 +-
+ drivers/gpu/drm/tiny/ili9341.c                     |  13 +-
+ drivers/gpu/drm/tiny/ili9486.c                     |  13 +-
+ drivers/gpu/drm/tiny/mi0283qt.c                    |  13 +-
+ drivers/gpu/drm/tiny/repaper.c                     |  14 +-
+ drivers/gpu/drm/tiny/st7586.c                      |  13 +-
+ drivers/gpu/drm/tiny/st7735r.c                     |  13 +-
+ drivers/gpu/drm/udl/udl_connector.c                |   4 +-
+ drivers/gpu/drm/udl/udl_drv.c                      |  27 +--
+ drivers/gpu/drm/udl/udl_modeset.c                  |   6 +-
+ drivers/gpu/drm/v3d/v3d_debugfs.c                  |  12 +-
+ drivers/gpu/drm/v3d/v3d_drv.c                      |  47 ++---
+ drivers/gpu/drm/v3d/v3d_drv.h                      |   7 +-
+ drivers/gpu/drm/v3d/v3d_gem.c                      |  17 +-
+ drivers/gpu/drm/v3d/v3d_irq.c                      |  16 +-
+ drivers/gpu/drm/v3d/v3d_mmu.c                      |  10 +-
+ drivers/gpu/drm/v3d/v3d_sched.c                    |  10 +-
+ drivers/gpu/drm/vboxvideo/vbox_drv.c               |  26 +--
+ drivers/gpu/drm/vboxvideo/vbox_drv.h               |   1 +
+ drivers/gpu/drm/vboxvideo/vbox_irq.c               |   2 +-
+ drivers/gpu/drm/vboxvideo/vbox_main.c              |  29 +--
+ drivers/gpu/drm/vboxvideo/vbox_mode.c              |  10 +-
+ drivers/gpu/drm/vboxvideo/vbox_ttm.c               |  12 --
+ drivers/video/fbdev/controlfb.c                    |   2 +-
+ drivers/video/fbdev/riva/riva_hw.c                 |  18 --
+ include/drm/drm_dp_mst_helper.h                    |  24 +--
+ include/drm/drm_drv.h                              |  33 ++++
+ include/drm/drm_modes.h                            |  11 --
+ 117 files changed, 1250 insertions(+), 1073 deletions(-)
+ delete mode 100644 drivers/gpu/drm/cirrus/Kconfig
+ delete mode 100644 drivers/gpu/drm/cirrus/Makefile
+ delete mode 100644 drivers/gpu/drm/pl111/pl111_vexpress.c
+ delete mode 100644 drivers/gpu/drm/pl111/pl111_vexpress.h
+ rename drivers/gpu/drm/{cirrus => tiny}/cirrus.c (97%)
+Merging drm-msm/msm-next (a5fb8b918920 drm/msm/a6xx: Use the DMA API for GMU memory objects)
+$ git merge drm-msm/msm-next
+Already up to date.
+Merging mali-dp/for-upstream/mali-dp (f634c6a80287 dt/bindings: display: Add optional property node define for Mali DP500)
+$ git merge mali-dp/for-upstream/mali-dp
+Merge made by the 'recursive' strategy.
+Merging imx-drm/imx-drm/next (2c76b324c794 drm/imx: parallel-display: Adjust bus_flags handling)
+$ git merge imx-drm/imx-drm/next
+Auto-merging drivers/gpu/drm/imx/parallel-display.c
+Merge made by the 'recursive' strategy.
+ drivers/gpu/drm/imx/parallel-display.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+Merging etnaviv/etnaviv/next (f232d9ec029c drm/etnaviv: fix TS cache flushing on GPUs with BLT engine)
+$ git merge etnaviv/etnaviv/next
+Already up to date.
+Merging regmap/for-next (6c9147d991fb Merge remote-tracking branch 'regmap/for-5.8' into regmap-next)
+$ git merge regmap/for-next
+Merge made by the 'recursive' strategy.
+ drivers/base/regmap/regmap-i2c.c | 61 +++++++++++++++++++++++++++++
+ drivers/base/regmap/regmap-irq.c | 84 ++++++++++++++++++++++++++++++++--------
+ drivers/base/regmap/regmap.c     |  1 +
+ include/linux/regmap.h           | 65 +++++++++++++------------------
+ 4 files changed, 156 insertions(+), 55 deletions(-)
+Merging sound/for-next (25cba461989c ALSA: seq: oss: remove unused inline function snd_seq_oss_timer_is_realtime)
+$ git merge sound/for-next
+Merge made by the 'recursive' strategy.
+ sound/core/seq/oss/seq_oss_timer.h |  10 -
+ sound/hda/intel-dsp-config.c       |  97 +++++++--
+ sound/hda/intel-nhlt.c             |  49 +----
+ sound/isa/ad1816a/ad1816a.c        |   2 +-
+ sound/pci/ac97/ac97_patch.c        |   2 +-
+ sound/pci/hda/Kconfig              |   4 +-
+ sound/pci/oxygen/xonar_pcm179x.c   |   4 +-
+ sound/usb/card.h                   |   4 +
+ sound/usb/endpoint.c               |  49 ++++-
+ sound/usb/endpoint.h               |   1 +
+ sound/usb/mixer_quirks.c           | 418 +++++++++++++++++++++++++++++++++++++
+ sound/usb/pcm.c                    |   2 +
+ sound/usb/proc.c                   |  53 +++++
+ sound/usb/quirks.c                 |  14 --
+ 14 files changed, 614 insertions(+), 95 deletions(-)
+Merging sound-asoc/for-next (d8b8d449c604 Merge remote-tracking branch 'asoc/for-5.8' into asoc-next)
+$ git merge sound-asoc/for-next
+Auto-merging sound/soc/intel/skylake/skl-topology.h
+Auto-merging sound/pci/hda/patch_hdmi.c
+Auto-merging include/sound/soc.h
+Removing Documentation/devicetree/bindings/sound/simple-card.txt
+Merge made by the 'recursive' strategy.
+ Documentation/devicetree/bindings/dsp/fsl,dsp.yaml |    2 +
+ .../devicetree/bindings/sound/fsl,asrc.txt         |    4 +
+ .../devicetree/bindings/sound/fsl,easrc.yaml       |  101 +
+ .../bindings/sound/nvidia,tegra-audio-wm8903.txt   |    1 +
+ .../devicetree/bindings/sound/qcom,q6adm.txt       |    2 +-
+ .../devicetree/bindings/sound/qcom,q6afe.txt       |   46 +-
+ .../devicetree/bindings/sound/qcom,q6asm.txt       |    7 +-
+ .../devicetree/bindings/sound/qcom,q6core.txt      |    2 +-
+ .../devicetree/bindings/sound/simple-card.txt      |  351 ----
+ .../devicetree/bindings/sound/simple-card.yaml     |  484 +++++
+ .../devicetree/bindings/sound/zl38060.yaml         |   69 +
+ drivers/soundwire/intel.c                          |    4 +-
+ include/sound/soc-component.h                      |   40 +-
+ include/sound/soc-dai.h                            |   41 +-
+ include/sound/soc.h                                |   32 +-
+ include/sound/sof.h                                |    3 +
+ include/sound/sof/dai-intel.h                      |   20 +-
+ include/sound/sof/info.h                           |   26 +-
+ include/sound/sof/topology.h                       |   16 +-
+ include/sound/sof/trace.h                          |    2 +-
+ include/uapi/sound/skl-tplg-interface.h            |    2 +
+ include/uapi/sound/sof/abi.h                       |    2 +-
+ include/uapi/sound/sof/tokens.h                    |    8 +
+ sound/pci/hda/patch_hdmi.c                         |    1 +
+ sound/soc/codecs/Kconfig                           |   24 +-
+ sound/soc/codecs/Makefile                          |    2 +
+ sound/soc/codecs/ad1980.c                          |    2 +-
+ sound/soc/codecs/ad73311.c                         |    2 +-
+ sound/soc/codecs/cs47l15.c                         |    9 +-
+ sound/soc/codecs/cs47l24.c                         |    8 +-
+ sound/soc/codecs/cs47l35.c                         |    9 +-
+ sound/soc/codecs/cs47l85.c                         |    9 +-
+ sound/soc/codecs/cs47l90.c                         |    9 +-
+ sound/soc/codecs/cs47l92.c                         |    9 +-
+ sound/soc/codecs/dmic.c                            |    4 +-
+ sound/soc/codecs/nau8810.c                         |   35 +-
+ sound/soc/codecs/nau8810.h                         |    8 +
+ sound/soc/codecs/rt1308-sdw.c                      |    4 +-
+ sound/soc/codecs/wcd9335.c                         |   44 +-
+ sound/soc/codecs/wcd934x.c                         |   30 +-
+ sound/soc/codecs/wm5102.c                          |    9 +-
+ sound/soc/codecs/wm5110.c                          |    8 +-
+ sound/soc/codecs/wm8782.c                          |    2 +-
+ sound/soc/codecs/wm8900.c                          |    6 -
+ sound/soc/codecs/wm8990.c                          |   98 -
+ sound/soc/codecs/wm8991.c                          |    8 -
+ sound/soc/codecs/wm8994.c                          |    8 -
+ sound/soc/codecs/wm_adsp.c                         |   18 +-
+ sound/soc/codecs/wm_adsp.h                         |   18 +-
+ sound/soc/codecs/zl38060.c                         |  638 ++++++
+ sound/soc/fsl/Kconfig                              |   11 +
+ sound/soc/fsl/Makefile                             |    2 +
+ sound/soc/fsl/fsl-asoc-card.c                      |   24 +-
+ sound/soc/fsl/fsl_asrc.c                           |  305 +--
+ sound/soc/fsl/fsl_asrc.h                           |   74 +-
+ sound/soc/fsl/fsl_asrc_common.h                    |  106 +
+ sound/soc/fsl/fsl_asrc_dma.c                       |   54 +-
+ sound/soc/fsl/fsl_easrc.c                          | 2117 ++++++++++++++++++++
+ sound/soc/fsl/fsl_easrc.h                          |  651 ++++++
+ sound/soc/fsl/fsl_micfil.c                         |    4 +-
+ sound/soc/hisilicon/hi6210-i2s.c                   |   16 +-
+ sound/soc/intel/atom/sst-mfld-platform-compress.c  |   43 +-
+ sound/soc/intel/atom/sst-mfld-platform-pcm.c       |    2 +-
+ sound/soc/intel/atom/sst-mfld-platform.h           |    2 +-
+ sound/soc/intel/boards/Kconfig                     |   44 +-
+ sound/soc/intel/boards/Makefile                    |    2 +
+ sound/soc/intel/boards/bdw-rt5650.c                |   29 +
+ sound/soc/intel/boards/bdw-rt5677.c                |   26 +
+ sound/soc/intel/boards/broadwell.c                 |   26 +
+ sound/soc/intel/boards/cml_rt1011_rt5682.c         |  222 +-
+ sound/soc/intel/boards/ehl_rt5660.c                |  323 +++
+ sound/soc/intel/boards/skl_hda_dsp_generic.c       |   31 +-
+ sound/soc/intel/boards/sof_da7219_max98373.c       |   21 +
+ sound/soc/intel/boards/sof_sdw.c                   |   55 +-
+ sound/soc/intel/boards/sof_sdw_hdmi.c              |    4 +-
+ sound/soc/intel/boards/sof_sdw_rt1308.c            |    2 +-
+ sound/soc/intel/boards/sof_sdw_rt5682.c            |    3 +-
+ sound/soc/intel/boards/sof_sdw_rt700.c             |    3 +-
+ sound/soc/intel/boards/sof_sdw_rt711.c             |    3 +-
+ sound/soc/intel/common/soc-acpi-intel-ehl-match.c  |    7 +
+ sound/soc/intel/haswell/sst-haswell-dsp.c          |  185 +-
+ sound/soc/intel/skylake/skl-sst-utils.c            |    2 +-
+ sound/soc/intel/skylake/skl-topology.c             |  184 +-
+ sound/soc/intel/skylake/skl-topology.h             |    1 +
+ sound/soc/mxs/mxs-saif.c                           |    5 +-
+ sound/soc/qcom/qdsp6/q6asm-dai.c                   |   51 +-
+ sound/soc/soc-compress.c                           |  231 +--
+ sound/soc/soc-core.c                               |  145 +-
+ sound/soc/soc-dai.c                                |  453 ++++-
+ sound/soc/soc-dapm.c                               |    4 +-
+ sound/soc/soc-generic-dmaengine-pcm.c              |    6 +-
+ sound/soc/soc-pcm.c                                |   80 +-
+ sound/soc/soc-topology.c                           |    2 +-
+ sound/soc/sof/compress.c                           |    7 +-
+ sound/soc/sof/compress.h                           |    7 +-
+ sound/soc/sof/imx/Kconfig                          |   31 +-
+ sound/soc/sof/imx/Makefile                         |    2 +
+ sound/soc/sof/imx/imx8m.c                          |  279 +++
+ sound/soc/sof/intel/hda-codec.c                    |    5 +-
+ sound/soc/sof/intel/hda-dsp.c                      |    8 +-
+ sound/soc/sof/intel/hda-loader.c                   |    9 +-
+ sound/soc/sof/intel/hda.c                          |   16 +-
+ sound/soc/sof/loader.c                             |   37 +-
+ sound/soc/sof/nocodec.c                            |    6 +-
+ sound/soc/sof/pcm.c                                |    4 +-
+ sound/soc/sof/sof-of-dev.c                         |   14 +
+ sound/soc/sof/sof-pci-dev.c                        |    2 +
+ sound/soc/sof/sof-priv.h                           |    2 +-
+ sound/soc/sof/topology.c                           |  323 +--
+ sound/soc/sprd/sprd-pcm-compress.c                 |   49 +-
+ sound/soc/sprd/sprd-pcm-dma.c                      |    2 +-
+ sound/soc/sprd/sprd-pcm-dma.h                      |    2 +-
+ sound/soc/tegra/tegra_wm8903.c                     |   20 +-
+ sound/soc/ti/omap-mcbsp.c                          |    2 +-
+ sound/soc/uniphier/aio-compress.c                  |   45 +-
+ sound/soc/uniphier/aio-dma.c                       |    2 +-
+ sound/soc/uniphier/aio.h                           |    2 +-
+ 117 files changed, 6992 insertions(+), 1732 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml
+ delete mode 100644 Documentation/devicetree/bindings/sound/simple-card.txt
+ create mode 100644 Documentation/devicetree/bindings/sound/simple-card.yaml
+ create mode 100644 Documentation/devicetree/bindings/sound/zl38060.yaml
+ create mode 100644 sound/soc/codecs/zl38060.c
+ create mode 100644 sound/soc/fsl/fsl_asrc_common.h
+ create mode 100644 sound/soc/fsl/fsl_easrc.c
+ create mode 100644 sound/soc/fsl/fsl_easrc.h
+ create mode 100644 sound/soc/intel/boards/ehl_rt5660.c
+ create mode 100644 sound/soc/sof/imx/imx8m.c
+Merging modules/modules-next (5c3a7db0c7ec module: Harden STRICT_MODULE_RWX)
+$ git merge modules/modules-next
+Auto-merging kernel/module.c
+Merge made by the 'recursive' strategy.
+ kernel/module.c | 51 +++++++++++++++++++++++++++++++++++++++++----------
+ 1 file changed, 41 insertions(+), 10 deletions(-)
+Merging input/next (9d17ad2369dc Input: atkbd - receive and use physcode->keycode mapping from FW)
+$ git merge input/next
+Removing include/linux/input/gp2ap002a00f.h
+Auto-merging drivers/input/touchscreen/mms114.c
+Auto-merging drivers/input/serio/i8042-x86ia64io.h
+Removing drivers/input/misc/gp2ap002a00f.c
+Auto-merging drivers/input/keyboard/tca6416-keypad.c
+Auto-merging drivers/input/keyboard/Kconfig
+Auto-merging drivers/input/evdev.c
+Merge made by the 'recursive' strategy.
+ .../bindings/input/touchscreen/mms114.txt          |   3 +-
+ drivers/input/evdev.c                              |   7 +-
+ drivers/input/keyboard/Kconfig                     |   2 +-
+ drivers/input/keyboard/atkbd.c                     |  97 ++++++-
+ drivers/input/keyboard/tca6416-keypad.c            |   2 +-
+ drivers/input/misc/Kconfig                         |  11 -
+ drivers/input/misc/Makefile                        |   1 -
+ drivers/input/misc/gp2ap002a00f.c                  | 281 ---------------------
+ drivers/input/serio/i8042-x86ia64io.h              |   1 +
+ drivers/input/serio/i8042.c                        |   3 +
+ drivers/input/touchscreen/mms114.c                 |  17 +-
+ include/linux/input/gp2ap002a00f.h                 |  23 --
+ 12 files changed, 123 insertions(+), 325 deletions(-)
+ delete mode 100644 drivers/input/misc/gp2ap002a00f.c
+ delete mode 100644 include/linux/input/gp2ap002a00f.h
+Merging block/for-next (ad62de4b9bd2 Merge branch 'for-5.8/block' into for-next)
+$ git merge block/for-next
+Auto-merging include/linux/libata.h
+Auto-merging include/linux/fs.h
+Auto-merging fs/block_dev.c
+Auto-merging drivers/scsi/scsi_lib.c
+Merge made by the 'recursive' strategy.
+ block/blk-core.c                | 129 +++++++++++++++---------------
+ block/blk-map.c                 |   9 +--
+ block/blk-merge.c               |  50 ++----------
+ block/blk-mq-debugfs.c          |   1 -
+ block/blk-mq-sched.c            |  82 ++++++++++++++++----
+ block/blk-mq.c                  |  43 ++++++----
+ block/blk-settings.c            |  37 ---------
+ block/blk.h                     |  45 ++---------
+ block/genhd.c                   |  37 +++++----
+ block/ioctl.c                   | 150 +++++++----------------------------
+ block/partitions/core.c         | 168 ++++++++++++++++++++++++++++++++++------
+ drivers/ata/libata-scsi.c       |  30 +++----
+ drivers/ide/ide-io.c            |   7 +-
+ drivers/md/bcache/request.c     |   1 -
+ drivers/md/dm-table.c           |  17 ----
+ drivers/md/dm.c                 |   3 +
+ drivers/s390/block/dasd_genhd.c |  20 +----
+ drivers/scsi/scsi_lib.c         |  86 ++++++++++++--------
+ fs/block_dev.c                  |  19 +----
+ include/linux/blk-cgroup.h      |  10 ++-
+ include/linux/blk-mq.h          |   3 +
+ include/linux/blk_types.h       |   2 +-
+ include/linux/blkdev.h          |  21 +++--
+ include/linux/fs.h              |   2 -
+ include/linux/genhd.h           |   2 +-
+ include/linux/libata.h          |   2 +
+ include/scsi/scsi_cmnd.h        |   1 +
+ include/scsi/scsi_device.h      |   3 +
+ include/scsi/scsi_host.h        |   7 ++
+ 29 files changed, 473 insertions(+), 514 deletions(-)
+Merging device-mapper/for-next (c421cafab065 dm ebs: pass discards down to underlying device)
+$ git merge device-mapper/for-next
+Auto-merging drivers/md/dm-crypt.c
+Merge made by the 'recursive' strategy.
+ Documentation/admin-guide/device-mapper/dm-ebs.rst |  51 +++
+ .../admin-guide/device-mapper/dm-integrity.rst     |  15 +-
+ drivers/md/Kconfig                                 |   9 +
+ drivers/md/Makefile                                |   2 +
+ drivers/md/dm-bufio.c                              |  69 ++-
+ drivers/md/dm-crypt.c                              |  76 +++-
+ drivers/md/dm-ebs-target.c                         | 471 +++++++++++++++++++++
+ drivers/md/dm-mpath.c                              |   8 +-
+ drivers/md/dm-verity-fec.c                         |   2 +-
+ drivers/md/dm-writecache.c                         |  52 ++-
+ include/linux/dm-bufio.h                           |  12 +
+ 11 files changed, 718 insertions(+), 49 deletions(-)
+ create mode 100644 Documentation/admin-guide/device-mapper/dm-ebs.rst
+ create mode 100644 drivers/md/dm-ebs-target.c
+Merging pcmcia/pcmcia-next (a8c122f72d94 pcmcia: remove some unused space characters)
+$ git merge pcmcia/pcmcia-next
+Already up to date.
+Merging mmc/next (fa6f23de36b7 mmc: sdhci-pci-o2micro: Make some symbols static)
+$ git merge mmc/next
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/mmc/arasan,sdhci.txt       |  15 +
+ drivers/mmc/core/debugfs.c                         |   6 +-
+ drivers/mmc/core/regulator.c                       |  17 +-
+ drivers/mmc/core/sd.c                              |   4 +-
+ drivers/mmc/host/Kconfig                           |   2 +-
+ drivers/mmc/host/android-goldfish.c                |  10 +-
+ drivers/mmc/host/atmel-mci.c                       |  12 +-
+ drivers/mmc/host/au1xmmc.c                         |  20 +-
+ drivers/mmc/host/dw_mmc-k3.c                       |   2 +-
+ drivers/mmc/host/dw_mmc.c                          |   3 +-
+ drivers/mmc/host/meson-gx-mmc.c                    |   5 +-
+ drivers/mmc/host/mmc_hsq.c                         |  29 +-
+ drivers/mmc/host/mmc_hsq.h                         |   1 +
+ drivers/mmc/host/mmci.c                            |  30 +-
+ drivers/mmc/host/mmci_stm32_sdmmc.c                |   1 +
+ drivers/mmc/host/mtk-sd.c                          |  19 +-
+ drivers/mmc/host/renesas_sdhi.h                    |   4 +-
+ drivers/mmc/host/renesas_sdhi_core.c               |  74 ++--
+ drivers/mmc/host/s3cmci.c                          |   7 -
+ drivers/mmc/host/sdhci-esdhc-imx.c                 |   4 +-
+ drivers/mmc/host/sdhci-msm.c                       |  48 ++-
+ drivers/mmc/host/sdhci-of-arasan.c                 | 471 +++++++++++++++------
+ drivers/mmc/host/sdhci-of-at91.c                   |   5 +-
+ drivers/mmc/host/sdhci-pci-core.c                  |   8 +-
+ drivers/mmc/host/sdhci-pci-o2micro.c               |   8 +-
+ drivers/mmc/host/sdhci-sprd.c                      |  28 +-
+ drivers/mmc/host/sdhci.c                           | 242 ++++++++---
+ drivers/mmc/host/sdhci.h                           |  23 +-
+ drivers/mmc/host/sunxi-mmc.c                       |   8 +-
+ drivers/mmc/host/usdhi6rol0.c                      |   9 +-
+ drivers/mmc/host/wbsd.c                            |  26 +-
+ drivers/staging/greybus/sdio.c                     |  10 +-
+ include/linux/mmc/host.h                           |   3 +
+ 33 files changed, 786 insertions(+), 368 deletions(-)
+Merging md/for-next (e820d55cb99d md: fix raid10 hang issue caused by barrier)
+$ git merge md/for-next
+Already up to date.
+Merging mfd/for-mfd-next (d2923aa45356 mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock)
+$ git merge mfd/for-mfd-next
+Already up to date.
+Merging backlight/for-backlight-next (ee0c8e494cc3 backlight: corgi: Convert to use GPIO descriptors)
+$ git merge backlight/for-backlight-next
+Already up to date.
+Merging battery/for-next (21b01cc879cc power: supply: max17042_battery: Add support for the TTE_NOW prop)
+$ git merge battery/for-next
+Merge made by the 'recursive' strategy.
+ drivers/power/reset/qcom-pon.c                   |  3 +-
+ drivers/power/supply/88pm860x_battery.c          |  8 +--
+ drivers/power/supply/Kconfig                     |  2 +-
+ drivers/power/supply/ab8500_fg.c                 |  2 +-
+ drivers/power/supply/axp288_charger.c            |  5 +-
+ drivers/power/supply/axp288_fuel_gauge.c         |  6 ++
+ drivers/power/supply/max14656_charger_detector.c |  5 +-
+ drivers/power/supply/max17042_battery.c          |  8 +++
+ drivers/power/supply/sc27xx_fuel_gauge.c         | 77 +++++++++++++++++++++++-
+ 9 files changed, 98 insertions(+), 18 deletions(-)
+Merging regulator/for-next (79d6cf2fc937 Merge remote-tracking branch 'regulator/for-5.8' into regulator-next)
+$ git merge regulator/for-next
+Auto-merging drivers/regulator/core.c
+Merge made by the 'recursive' strategy.
+ .../bindings/regulator/maxim,max77826.yaml         |  68 +++++
+ drivers/regulator/Kconfig                          |  10 +
+ drivers/regulator/Makefile                         |   1 +
+ drivers/regulator/ab8500.c                         |  22 --
+ drivers/regulator/bd718x7-regulator.c              |  46 +++-
+ drivers/regulator/core.c                           |   1 +
+ drivers/regulator/max77826-regulator.c             | 301 +++++++++++++++++++++
+ drivers/regulator/qcom_rpm-regulator.c             |  10 -
+ drivers/regulator/tps80031-regulator.c             |   7 +-
+ 9 files changed, 426 insertions(+), 40 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
+ create mode 100644 drivers/regulator/max77826-regulator.c
+Merging security/next-testing (3e27a33932df security: remove duplicated include from security.h)
+$ git merge security/next-testing
+Already up to date.
+Merging apparmor/apparmor-next (01df52d726b5 apparmor: remove duplicate check of xattrs on profile attachment.)
+$ git merge apparmor/apparmor-next
+Auto-merging security/apparmor/policy_unpack.c
+Auto-merging security/apparmor/apparmorfs.c
+Auto-merging fs/proc/base.c
+Merge made by the 'recursive' strategy.
+ fs/proc/base.c                    | 13 ++++++++++
+ security/apparmor/apparmorfs.c    | 54 +++++++++------------------------------
+ security/apparmor/domain.c        | 39 ++++++++++------------------
+ security/apparmor/include/label.h |  1 +
+ security/apparmor/include/match.h | 11 ++++++++
+ security/apparmor/label.c         | 37 +++++++++++++++++++++++++--
+ security/apparmor/match.c         | 53 +++++++++++++++++++++++++++++++++++++-
+ security/apparmor/path.c          |  2 +-
+ security/apparmor/policy_unpack.c |  4 +++
+ 9 files changed, 143 insertions(+), 71 deletions(-)
+Merging integrity/next-integrity (2592677c0486 ima: Use ima_hash_algo for collision detection in the measurement list)
+$ git merge integrity/next-integrity
+Auto-merging security/integrity/ima/ima.h
+Merge made by the 'recursive' strategy.
+ security/integrity/ima/ima.h          |  10 +-
+ security/integrity/ima/ima_api.c      |  22 +--
+ security/integrity/ima/ima_crypto.c   | 248 +++++++++++++++++++++++++++++-----
+ security/integrity/ima/ima_fs.c       |   4 +-
+ security/integrity/ima/ima_init.c     |  22 ++-
+ security/integrity/ima/ima_main.c     |   3 +
+ security/integrity/ima/ima_queue.c    |  36 +++--
+ security/integrity/ima/ima_template.c |  25 +++-
+ 8 files changed, 297 insertions(+), 73 deletions(-)
+Merging keys/keys-next (43672cf93c6d Merge branch 'notifications-pipe-core' into keys-next)
+$ git merge keys/keys-next
+Auto-merging security/selinux/hooks.c
+Auto-merging security/security.c
+Auto-merging security/keys/keyring.c
+Auto-merging security/keys/keyctl.c
+Auto-merging security/keys/key.c
+Auto-merging security/keys/internal.h
+Auto-merging init/Kconfig
+Auto-merging include/linux/security.h
+Auto-merging include/linux/pipe_fs_i.h
+Auto-merging include/linux/lsm_hooks.h
+CONFLICT (content): Merge conflict in include/linux/lsm_hooks.h
+Auto-merging fs/splice.c
+Auto-merging fs/pipe.c
+CONFLICT (content): Merge conflict in fs/pipe.c
+Auto-merging Documentation/userspace-api/ioctl/ioctl-number.rst
+Resolved 'fs/pipe.c' using previous resolution.
+Resolved 'include/linux/lsm_hooks.h' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+[master 066cd8bf9120] Merge remote-tracking branch 'keys/keys-next'
+$ git diff -M --stat --summary HEAD^..
+ Documentation/security/keys/core.rst               |  58 ++
+ Documentation/userspace-api/ioctl/ioctl-number.rst |   1 +
+ Documentation/watch_queue.rst                      | 354 +++++++++++
+ fs/pipe.c                                          | 242 +++++---
+ fs/splice.c                                        |  12 +-
+ include/linux/key.h                                |   3 +
+ include/linux/lsm_audit.h                          |   1 +
+ include/linux/lsm_hooks.h                          |  18 +
+ include/linux/pipe_fs_i.h                          |  27 +-
+ include/linux/security.h                           |  31 +
+ include/linux/watch_queue.h                        | 127 ++++
+ include/uapi/linux/keyctl.h                        |   2 +
+ include/uapi/linux/watch_queue.h                   | 104 ++++
+ init/Kconfig                                       |  12 +
+ kernel/Makefile                                    |   1 +
+ kernel/watch_queue.c                               | 659 +++++++++++++++++++++
+ samples/Kconfig                                    |   6 +
+ samples/Makefile                                   |   1 +
+ samples/watch_queue/Makefile                       |   7 +
+ samples/watch_queue/watch_test.c                   | 186 ++++++
+ security/keys/Kconfig                              |   9 +
+ security/keys/compat.c                             |   3 +
+ security/keys/gc.c                                 |   5 +
+ security/keys/internal.h                           |  30 +-
+ security/keys/key.c                                |  38 +-
+ security/keys/keyctl.c                             |  99 +++-
+ security/keys/keyring.c                            |  20 +-
+ security/keys/request_key.c                        |   4 +-
+ security/security.c                                |  23 +
+ security/selinux/hooks.c                           |  14 +
+ security/smack/smack_lsm.c                         |  83 ++-
+ 31 files changed, 2075 insertions(+), 105 deletions(-)
+ create mode 100644 Documentation/watch_queue.rst
+ create mode 100644 include/linux/watch_queue.h
+ create mode 100644 include/uapi/linux/watch_queue.h
+ create mode 100644 kernel/watch_queue.c
+ create mode 100644 samples/watch_queue/Makefile
+ create mode 100644 samples/watch_queue/watch_test.c
+$ git am -3 ../patches/0001-io_uring-fix-up-get_pipe_info-API-change.patch
+Applying: io_uring: fix up for get_pipe_info() API change
+$ git reset HEAD^
+Unstaged changes after reset:
+M	fs/io_uring.c
+$ git add -A .
+$ git commit -v -a --amend
+[master 56ef12aef55f] Merge remote-tracking branch 'keys/keys-next'
+ Date: Thu Apr 30 13:18:08 2020 +1000
+$ git am -3 ../patches/0001-security-keys-fixup-for-security-Refactor-declaratio.patch
+Applying: security: keys: fixup for "security: Refactor declaration of LSM hooks"
+$ git reset HEAD^
+Unstaged changes after reset:
+M	include/linux/lsm_hook_defs.h
+$ git add -A .
+$ git commit -v -a --amend
+[master efc73039e35e] Merge remote-tracking branch 'keys/keys-next'
+ Date: Thu Apr 30 13:18:08 2020 +1000
+Merging selinux/next (9521eb3ea19a selinux: don't produce incorrect filename_trans_count)
+$ git merge selinux/next
+Auto-merging security/selinux/ss/policydb.c
+Merge made by the 'recursive' strategy.
+ security/selinux/Makefile           |   2 +-
+ security/selinux/include/security.h |   3 +-
+ security/selinux/ss/context.c       |  32 ++++
+ security/selinux/ss/context.h       |  11 +-
+ security/selinux/ss/ebitmap.c       |  14 ++
+ security/selinux/ss/ebitmap.h       |   1 +
+ security/selinux/ss/mls.c           |   2 +-
+ security/selinux/ss/mls.h           |  11 ++
+ security/selinux/ss/policydb.c      | 350 ++++++++++++++++++++++++++++--------
+ security/selinux/ss/policydb.h      |  11 +-
+ security/selinux/ss/services.c      | 111 ++++--------
+ security/selinux/ss/services.h      |   3 -
+ security/selinux/ss/sidtab.c        |  35 ++--
+ security/selinux/ss/sidtab.h        |   1 +
+ 14 files changed, 404 insertions(+), 183 deletions(-)
+ create mode 100644 security/selinux/ss/context.c
+Merging tomoyo/master (8f3d9f354286 Linux 5.7-rc1)
+$ git merge tomoyo/master
+Already up to date.
+Merging tpmdd/next (40686e855d3c tpm/tpm_ftpm_tee: Use UUID API for exporting the UUID)
+$ git merge tpmdd/next
+Merge made by the 'recursive' strategy.
+ drivers/char/tpm/tpm_ftpm_tee.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+Merging watchdog/master (ae83d0b416db Linux 5.7-rc2)
+$ git merge watchdog/master
+Already up to date.
+Merging iommu/next (ff68eb23308e Merge branches 'iommu/fixes', 'arm/qcom', 'arm/omap', 'arm/smmu', 'x86/amd', 'x86/vt-d', 'virtio' and 'core' into next)
+$ git merge iommu/next
+Already up to date.
+Merging vfio/next (f44efca0493d vfio: Ignore -ENODEV when getting MSI cookie)
+$ git merge vfio/next
+Already up to date.
+Merging audit/next (a45d88530b25 netfilter: add audit table unregister actions)
+$ git merge audit/next
+Auto-merging kernel/audit.c
+Auto-merging include/linux/audit.h
+Merge made by the 'recursive' strategy.
+ include/linux/audit.h           |  22 +++++++++
+ include/uapi/linux/audit.h      |   1 +
+ kernel/audit.c                  | 100 +++++++++++++++++++++++++++++-----------
+ kernel/audit.h                  |   2 +-
+ kernel/auditfilter.c            |  16 +++----
+ kernel/auditsc.c                |  25 ++++++++++
+ net/bridge/netfilter/ebtables.c |  14 +++---
+ net/netfilter/x_tables.c        |  14 ++----
+ 8 files changed, 141 insertions(+), 53 deletions(-)
+Merging devicetree/for-next (7456427af9de of: property: Do not link to disabled devices)
+$ git merge devicetree/for-next
+Auto-merging MAINTAINERS
+Auto-merging Documentation/devicetree/bindings/vendor-prefixes.yaml
+Removing Documentation/devicetree/bindings/timer/ingenic,tcu.txt
+Removing Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
+Removing Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt
+Removing Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
+Removing Documentation/devicetree/bindings/net/stm32-dwmac.txt
+Removing Documentation/devicetree/bindings/mmc/jz4740.txt
+Removing Documentation/devicetree/bindings/input/gpio-keys.txt
+Removing Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+Auto-merging Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+Removing Documentation/devicetree/bindings/i2c/i2c-xiic.txt
+Removing Documentation/devicetree/bindings/i2c/i2c-cadence.txt
+Removing Documentation/devicetree/bindings/dma/jz4780-dma.txt
+Auto-merging Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+Auto-merging Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+Merge made by the 'recursive' strategy.
+ Documentation/devicetree/bindings/arm/altera.yaml  |   6 +-
+ .../arm/amlogic/amlogic,meson-gx-ao-secure.yaml    |   2 +-
+ Documentation/devicetree/bindings/arm/bitmain.yaml |   2 +-
+ .../devicetree/bindings/arm/nxp/lpc32xx.yaml       |   9 +-
+ .../bindings/arm/socionext/uniphier.yaml           |  26 +-
+ .../devicetree/bindings/arm/stm32/st,mlahb.yaml    |   2 +-
+ .../bindings/arm/stm32/st,stm32-syscon.yaml        |   6 +-
+ .../devicetree/bindings/ata/faraday,ftide010.yaml  |   4 +-
+ .../bindings/bus/allwinner,sun8i-a23-rsb.yaml      |   4 +-
+ .../clock/allwinner,sun4i-a10-gates-clk.yaml       |   8 +-
+ .../devicetree/bindings/clock/fsl,plldig.yaml      |  17 +-
+ .../devicetree/bindings/clock/qcom,mmcc.yaml       |  16 +-
+ .../bindings/connector/usb-connector.yaml          |   6 +-
+ .../crypto/allwinner,sun4i-a10-crypto.yaml         |  14 +-
+ .../bindings/crypto/allwinner,sun8i-ce.yaml        |  16 +-
+ .../bindings/crypto/amlogic,gxl-crypto.yaml        |   2 +-
+ .../bindings/display/allwinner,sun4i-a10-hdmi.yaml |  40 +--
+ .../bindings/display/allwinner,sun4i-a10-tcon.yaml |  58 ++---
+ .../display/allwinner,sun6i-a31-mipi-dsi.yaml      |  28 +-
+ .../display/allwinner,sun8i-a83t-dw-hdmi.yaml      |  10 +-
+ .../bindings/display/bridge/lvds-codec.yaml        |  18 +-
+ .../bindings/display/panel/sony,acx424akp.yaml     |   2 +-
+ .../bindings/display/panel/xinpeng,xpp055c272.yaml |   4 +-
+ .../devicetree/bindings/display/renesas,cmm.yaml   |  16 +-
+ .../devicetree/bindings/dma/ingenic,dma.yaml       |  80 ++++++
+ .../devicetree/bindings/dma/jz4780-dma.txt         |  64 -----
+ .../devicetree/bindings/dma/ti/k3-udma.yaml        |   8 +-
+ .../bindings/gpio/brcm,xgs-iproc-gpio.yaml         |   2 +-
+ .../devicetree/bindings/gpu/arm,mali-midgard.yaml  |  18 +-
+ .../devicetree/bindings/gpu/arm,mali-utgard.yaml   |   4 +
+ .../devicetree/bindings/gpu/vivante,gc.yaml        |   2 +-
+ .../devicetree/bindings/i2c/cdns,i2c-r1p10.yaml    |  58 +++++
+ .../devicetree/bindings/i2c/i2c-cadence.txt        |  28 --
+ .../devicetree/bindings/i2c/i2c-rk3x.yaml          |  10 +-
+ Documentation/devicetree/bindings/i2c/i2c-xiic.txt |  25 --
+ .../devicetree/bindings/i2c/st,stm32-i2c.yaml      |   6 +-
+ .../bindings/i2c/xlnx,xps-iic-2.00.a.yaml          |  49 ++++
+ .../devicetree/bindings/iio/adc/adi,ad7124.yaml    |   4 +-
+ .../devicetree/bindings/iio/adc/lltc,ltc2496.yaml  |   6 +-
+ .../bindings/iio/temperature/adi,ltc2983.yaml      |   4 +-
+ .../input/allwinner,sun4i-a10-lradc-keys.yaml      |   4 +-
+ .../devicetree/bindings/input/gpio-keys-polled.txt |  45 ----
+ .../devicetree/bindings/input/gpio-keys.txt        |  58 -----
+ .../devicetree/bindings/input/gpio-keys.yaml       | 152 +++++++++++
+ .../bindings/input/touchscreen/goodix.yaml         |   2 +-
+ .../bindings/interconnect/qcom,msm8916.yaml        |   4 +-
+ .../bindings/interconnect/qcom,msm8974.yaml        |   4 +-
+ .../bindings/interconnect/qcom,qcs404.yaml         |   4 +-
+ .../allwinner,sun7i-a20-sc-nmi.yaml                |  12 +-
+ .../intel,ixp4xx-interrupt.yaml                    |   8 +-
+ .../interrupt-controller/st,stm32-exti.yaml        |  12 +-
+ .../devicetree/bindings/iommu/samsung,sysmmu.yaml  |  10 +-
+ .../devicetree/bindings/mailbox/fsl,mu.txt         |   2 +-
+ .../devicetree/bindings/mailbox/st,stm32-ipcc.yaml |   2 +-
+ .../bindings/media/allwinner,sun4i-a10-csi.yaml    |  28 +-
+ .../devicetree/bindings/media/amlogic,gx-vdec.yaml |  14 +-
+ .../devicetree/bindings/media/renesas,ceu.yaml     |  28 +-
+ .../devicetree/bindings/media/renesas,vin.yaml     |   8 +-
+ .../devicetree/bindings/media/ti,vpe.yaml          |   2 +-
+ .../bindings/memory-controllers/exynos-srom.yaml   |   4 +-
+ .../memory-controllers/fsl/imx8m-ddrc.yaml         |   6 +-
+ .../devicetree/bindings/mfd/st,stm32-lptimer.yaml  |   4 +-
+ .../devicetree/bindings/mfd/st,stm32-timers.yaml   |   4 +-
+ Documentation/devicetree/bindings/mfd/syscon.yaml  |  12 +-
+ .../devicetree/bindings/mips/ingenic/devices.yaml  |   4 +
+ .../devicetree/bindings/mmc/cdns,sdhci.yaml        |   2 +-
+ .../devicetree/bindings/mmc/ingenic,mmc.yaml       |  79 ++++++
+ Documentation/devicetree/bindings/mmc/jz4740.txt   |  41 ---
+ .../devicetree/bindings/mmc/rockchip-dw-mshc.yaml  |  16 +-
+ .../bindings/mmc/socionext,uniphier-sd.yaml        |  14 +-
+ .../devicetree/bindings/mtd/denali,nand.yaml       |   4 +-
+ .../bindings/net/allwinner,sun8i-a83t-emac.yaml    |   4 +-
+ .../devicetree/bindings/net/can/bosch,m_can.yaml   |  52 ++--
+ .../devicetree/bindings/net/renesas,ether.yaml     |   4 +-
+ .../devicetree/bindings/net/snps,dwmac.yaml        |   8 +-
+ .../devicetree/bindings/net/stm32-dwmac.txt        |  44 ----
+ .../devicetree/bindings/net/stm32-dwmac.yaml       | 149 +++++++++++
+ .../devicetree/bindings/net/ti,cpsw-switch.yaml    |  12 +-
+ .../devicetree/bindings/net/ti,davinci-mdio.yaml   |  27 +-
+ .../devicetree/bindings/nvmem/rockchip-efuse.txt   |  54 ----
+ .../devicetree/bindings/nvmem/rockchip-efuse.yaml  |  70 +++++
+ .../bindings/phy/intel,lgm-emmc-phy.yaml           |   2 +-
+ .../devicetree/bindings/pwm/pwm-samsung.yaml       |  16 +-
+ .../bindings/remoteproc/st,stm32-rproc.yaml        |   2 +-
+ .../bindings/reserved-memory/reserved-memory.txt   |   2 +
+ .../reset/brcm,bcm7216-pcie-sata-rescal.yaml       |   4 +-
+ .../devicetree/bindings/rtc/st,stm32-rtc.yaml      |  38 +--
+ .../bindings/serial/amlogic,meson-uart.yaml        |  16 +-
+ .../devicetree/bindings/serial/rs485.yaml          |  17 +-
+ .../bindings/soc/amlogic/amlogic,canvas.yaml       |  10 +-
+ .../devicetree/bindings/sound/renesas,fsi.yaml     |  16 +-
+ .../bindings/spi/qcom,spi-qcom-qspi.yaml           |  10 +-
+ .../devicetree/bindings/spi/renesas,hspi.yaml      |   4 +-
+ .../devicetree/bindings/spi/spi-pl022.yaml         |   2 +-
+ .../devicetree/bindings/spi/st,stm32-qspi.yaml     |   4 +-
+ .../sram/allwinner,sun4i-a10-system-control.yaml   |  64 ++---
+ .../devicetree/bindings/sram/rockchip-pmu-sram.txt |  16 --
+ Documentation/devicetree/bindings/sram/sram.yaml   |  28 +-
+ .../bindings/thermal/amlogic,thermal.yaml          |  10 +-
+ .../devicetree/bindings/timer/arm,arch_timer.yaml  |   4 +-
+ .../bindings/timer/arm,arch_timer_mmio.yaml        |   4 +-
+ .../bindings/timer/cadence,ttc-timer.txt           |  21 --
+ .../devicetree/bindings/timer/cdns,ttc.yaml        |  48 ++++
+ .../devicetree/bindings/timer/ingenic,tcu.txt      | 138 ----------
+ .../devicetree/bindings/timer/ingenic,tcu.yaml     | 281 +++++++++++++++++++++
+ Documentation/devicetree/bindings/usb/dwc2.yaml    |   8 +-
+ .../devicetree/bindings/usb/generic-ehci.yaml      |   3 +
+ .../devicetree/bindings/usb/generic-ohci.yaml      |   3 +
+ .../devicetree/bindings/usb/ingenic,musb.yaml      |   3 +
+ .../devicetree/bindings/vendor-prefixes.yaml       |  10 +
+ MAINTAINERS                                        |   4 +-
+ drivers/of/dynamic.c                               |   3 +-
+ drivers/of/fdt.c                                   |   2 +-
+ drivers/of/property.c                              |  20 +-
+ 114 files changed, 1506 insertions(+), 1004 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/dma/ingenic,dma.yaml
+ delete mode 100644 Documentation/devicetree/bindings/dma/jz4780-dma.txt
+ create mode 100644 Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+ delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-cadence.txt
+ delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-xiic.txt
+ create mode 100644 Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+ delete mode 100644 Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+ delete mode 100644 Documentation/devicetree/bindings/input/gpio-keys.txt
+ create mode 100644 Documentation/devicetree/bindings/input/gpio-keys.yaml
+ create mode 100644 Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
+ delete mode 100644 Documentation/devicetree/bindings/mmc/jz4740.txt
+ delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
+ create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+ delete mode 100644 Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
+ create mode 100644 Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
+ delete mode 100644 Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt
+ delete mode 100644 Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
+ create mode 100644 Documentation/devicetree/bindings/timer/cdns,ttc.yaml
+ delete mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
+ create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
+Merging mailbox/mailbox-for-next (0a67003b1985 mailbox: imx: add SCU MU support)
+$ git merge mailbox/mailbox-for-next
+Already up to date.
+Merging spi/for-next (7f17e5a56704 Merge remote-tracking branch 'spi/for-5.8' into spi-next)
+$ git merge spi/for-next
+Auto-merging MAINTAINERS
+Removing Documentation/devicetree/bindings/spi/spi-rspi.txt
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/spi/brcm,spi-bcm-qspi.txt  |  10 +
+ .../devicetree/bindings/spi/renesas,rspi.yaml      | 144 +++++++++
+ Documentation/devicetree/bindings/spi/spi-rspi.txt |  73 -----
+ MAINTAINERS                                        |   5 +
+ drivers/spi/Kconfig                                |   6 +
+ drivers/spi/Makefile                               |   1 +
+ drivers/spi/spi-amd.c                              | 332 +++++++++++++++++++++
+ drivers/spi/spi-bcm-qspi.c                         | 138 ++++++++-
+ drivers/spi/spi-dw.c                               |  57 +---
+ drivers/spi/spi-dw.h                               |  12 -
+ drivers/spi/spi-fsl-dspi.c                         |  23 ++
+ drivers/spi/spi-fsl-lpspi.c                        |  15 +-
+ drivers/spi/spi-fsl-qspi.c                         |  11 +-
+ drivers/spi/spi-fsl-spi.c                          |   2 +-
+ drivers/spi/spi-hisi-sfc-v3xx.c                    |  26 +-
+ drivers/spi/spi-mem.c                              |  10 +-
+ drivers/spi/spi-mtk-nor.c                          |   2 +-
+ drivers/spi/spi-orion.c                            |  70 +----
+ drivers/spi/spi-sh-msiof.c                         |   2 +-
+ drivers/spi/spi-sprd-adi.c                         |   2 +-
+ drivers/spi/spi-stm32-qspi.c                       |  62 +++-
+ drivers/spi/spi-uniphier.c                         |   8 +-
+ drivers/spi/spi.c                                  |   2 +-
+ drivers/spi/spidev.c                               |   3 +-
+ tools/spi/Makefile                                 |   4 +-
+ tools/spi/spidev_test.c                            |  21 +-
+ 26 files changed, 804 insertions(+), 237 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/spi/renesas,rspi.yaml
+ delete mode 100644 Documentation/devicetree/bindings/spi/spi-rspi.txt
+ create mode 100644 drivers/spi/spi-amd.c
+Merging tip/auto-latest (cf14a924b8f6 Merge branch 'core/core')
+$ git merge tip/auto-latest
+Auto-merging tools/perf/util/dso.h
+Auto-merging tools/perf/util/branch.h
+Auto-merging tools/perf/builtin-script.c
+Auto-merging lib/Kconfig
+Auto-merging kernel/trace/bpf_trace.c
+Auto-merging kernel/events/core.c
+Auto-merging kernel/Makefile
+Auto-merging include/linux/perf_event.h
+Auto-merging include/linux/mm.h
+Auto-merging include/linux/efi.h
+Auto-merging fs/proc/task_mmu.c
+Auto-merging fs/compat_binfmt_elf.c
+Auto-merging drivers/gpu/drm/i915/i915_perf.c
+Auto-merging arch/x86/Kconfig
+Auto-merging arch/arm64/include/asm/elf.h
+Auto-merging arch/arm64/Kconfig
+Auto-merging arch/arm/boot/compressed/vmlinux.lds.S
+Auto-merging arch/arm/Kconfig
+Auto-merging MAINTAINERS
+Auto-merging Documentation/admin-guide/sysctl/kernel.rst
+Auto-merging Documentation/admin-guide/kernel-parameters.txt
+Merge made by the 'recursive' strategy.
+ Documentation/admin-guide/kernel-parameters.txt    |   7 +
+ Documentation/admin-guide/perf-security.rst        |  86 ++-
+ Documentation/admin-guide/sysctl/kernel.rst        |  16 +-
+ Documentation/dev-tools/index.rst                  |   1 +
+ Documentation/dev-tools/kcsan.rst                  | 266 ++++++++
+ Documentation/fb/efifb.rst                         |  33 +-
+ MAINTAINERS                                        |  11 +
+ Makefile                                           |   3 +-
+ arch/arm/Kconfig                                   |   2 +-
+ arch/arm/boot/compressed/vmlinux.lds.S             |   2 +-
+ arch/arm/include/asm/efi.h                         |   8 -
+ arch/arm/kernel/elf.c                              |  27 +-
+ arch/arm64/Kconfig                                 |   2 +-
+ arch/arm64/include/asm/efi.h                       |   8 -
+ arch/arm64/include/asm/elf.h                       |  23 +-
+ arch/ia64/kernel/efi.c                             |  12 +-
+ arch/parisc/kernel/perf.c                          |   2 +-
+ arch/powerpc/perf/imc-pmu.c                        |   4 +-
+ arch/x86/Kconfig                                   |   2 +
+ arch/x86/Kconfig.debug                             |   9 -
+ arch/x86/Makefile                                  |  10 +-
+ arch/x86/boot/Makefile                             |   9 +-
+ arch/x86/boot/compressed/Makefile                  |   2 +
+ arch/x86/boot/compressed/vmlinux.lds.S             |   1 +
+ arch/x86/entry/calling.h                           |  40 +-
+ arch/x86/entry/entry_32.S                          |   2 -
+ arch/x86/entry/entry_64.S                          |  14 +-
+ arch/x86/entry/vdso/Makefile                       |  21 +-
+ arch/x86/entry/vdso/vdso2c.c                       |   4 +-
+ arch/x86/entry/vdso/vdso2c.h                       |  16 +-
+ arch/x86/events/core.c                             |  11 +-
+ arch/x86/include/asm/amd_nb.h                      |   1 +
+ arch/x86/include/asm/bitops.h                      |   6 +-
+ arch/x86/include/asm/doublefault.h                 |   2 +-
+ arch/x86/include/asm/efi.h                         |  29 +-
+ arch/x86/include/asm/elf.h                         |  22 +-
+ arch/x86/include/asm/mce.h                         |  28 +-
+ arch/x86/include/asm/memtype.h                     |   3 +
+ arch/x86/include/asm/mmu_context.h                 |  88 +--
+ arch/x86/include/asm/orc_types.h                   |   3 +-
+ arch/x86/include/asm/paravirt.h                    |  12 +-
+ arch/x86/include/asm/pgtable_32.h                  |   2 +-
+ arch/x86/include/asm/pgtable_types.h               |  44 +-
+ arch/x86/include/asm/processor.h                   |   2 -
+ arch/x86/include/asm/stackprotector.h              |   7 +-
+ arch/x86/include/asm/tlbflush.h                    | 441 ++-----------
+ arch/x86/include/asm/traps.h                       |   2 -
+ arch/x86/include/asm/unwind.h                      |   2 +-
+ arch/x86/include/asm/unwind_hints.h                |  31 +-
+ arch/x86/include/uapi/asm/mce.h                    |   1 +
+ arch/x86/kernel/Makefile                           |   8 +-
+ arch/x86/kernel/alternative.c                      |  55 ++
+ arch/x86/kernel/cpu/Makefile                       |   3 +
+ arch/x86/kernel/cpu/common.c                       |  25 +-
+ arch/x86/kernel/cpu/mce/amd.c                      | 233 +++----
+ arch/x86/kernel/cpu/mce/core.c                     |  84 ++-
+ arch/x86/kernel/cpu/mce/dev-mcelog.c               |   5 +
+ arch/x86/kernel/cpu/mce/internal.h                 |  10 +-
+ arch/x86/kernel/cpu/mce/severity.c                 |   6 +-
+ arch/x86/kernel/cpu/microcode/core.c               |  15 +-
+ arch/x86/kernel/cpu/mtrr/generic.c                 |   4 +-
+ arch/x86/kernel/dumpstack_32.c                     |   4 -
+ arch/x86/kernel/dumpstack_64.c                     |   3 +-
+ arch/x86/kernel/e820.c                             |  18 +-
+ arch/x86/kernel/early_printk.c                     |   3 -
+ arch/x86/kernel/ftrace.c                           |  12 +-
+ arch/x86/kernel/ftrace_64.S                        |  40 +-
+ arch/x86/kernel/paravirt.c                         |  21 +-
+ arch/x86/kernel/process.c                          |  11 +
+ arch/x86/kernel/setup.c                            |   6 +
+ arch/x86/kernel/smpboot.c                          |  25 +-
+ arch/x86/kernel/traps.c                            |   2 -
+ arch/x86/kernel/unwind_frame.c                     |   3 +
+ arch/x86/kernel/unwind_orc.c                       | 111 ++--
+ arch/x86/lib/Makefile                              |   9 +
+ arch/x86/mm/Makefile                               |   4 +
+ arch/x86/mm/cpu_entry_area.c                       |   4 +-
+ arch/x86/mm/init.c                                 |  44 +-
+ arch/x86/mm/init_64.c                              |   4 +-
+ arch/x86/mm/ioremap.c                              |  10 +-
+ arch/x86/mm/kmmio.c                                |   2 +-
+ arch/x86/mm/mem_encrypt.c                          |   2 +-
+ arch/x86/mm/mmap.c                                 |   2 +
+ arch/x86/mm/pat/set_memory.c                       |   7 +-
+ arch/x86/mm/pgtable.c                              |  16 +-
+ arch/x86/mm/pgtable_32.c                           |   2 +-
+ arch/x86/mm/tlb.c                                  | 384 ++++++++++-
+ arch/x86/platform/efi/efi.c                        |   8 +-
+ arch/x86/platform/uv/tlb_uv.c                      |   4 +-
+ arch/x86/purgatory/.gitignore                      |   1 +
+ arch/x86/purgatory/Makefile                        |  21 +-
+ arch/x86/realmode/Makefile                         |   3 +
+ arch/x86/realmode/rm/Makefile                      |   3 +
+ arch/x86/xen/smp_pv.c                              |   1 +
+ drivers/acpi/acpi_extlog.c                         |  19 +-
+ drivers/acpi/nfit/mce.c                            |   1 +
+ drivers/edac/amd64_edac.c                          |   8 -
+ drivers/edac/edac_mc.c                             |  61 --
+ drivers/edac/i7core_edac.c                         |   5 +-
+ drivers/edac/mce_amd.c                             |  28 +-
+ drivers/edac/mce_amd.h                             |   2 -
+ drivers/edac/pnd2_edac.c                           |   8 +-
+ drivers/edac/sb_edac.c                             |   7 +-
+ drivers/edac/skx_common.c                          |   3 +-
+ drivers/firmware/efi/Kconfig                       |  15 +-
+ drivers/firmware/efi/arm-init.c                    |   4 +-
+ drivers/firmware/efi/efi.c                         |  44 +-
+ drivers/firmware/efi/libstub/Makefile              |  44 +-
+ drivers/firmware/efi/libstub/alignedmem.c          |  57 ++
+ drivers/firmware/efi/libstub/arm64-stub.c          |  94 +--
+ drivers/firmware/efi/libstub/efi-stub-helper.c     |  47 +-
+ .../efi/libstub/{arm-stub.c => efi-stub.c}         |  23 +-
+ drivers/firmware/efi/libstub/efistub.h             |  96 +--
+ drivers/firmware/efi/libstub/fdt.c                 |   8 +-
+ drivers/firmware/efi/libstub/file.c                |  34 +-
+ drivers/firmware/efi/libstub/gop.c                 | 492 +++++++++++---
+ drivers/firmware/efi/libstub/mem.c                 | 191 +-----
+ drivers/firmware/efi/libstub/randomalloc.c         |   6 +-
+ drivers/firmware/efi/libstub/relocate.c            | 174 +++++
+ drivers/firmware/efi/libstub/x86-stub.c            |  35 +-
+ drivers/gpu/drm/i915/i915_perf.c                   |  13 +-
+ drivers/oprofile/event_buffer.c                    |   2 +-
+ drivers/perf/arm_spe_pmu.c                         |   4 +-
+ drivers/ras/cec.c                                  |  33 +-
+ drivers/xen/privcmd.c                              |   1 -
+ fs/compat_binfmt_elf.c                             |   5 +
+ fs/proc/task_mmu.c                                 |   3 -
+ include/asm-generic/atomic-instrumented.h          | 711 ++++++++++----------
+ include/asm-generic/atomic-long.h                  | 331 +++++-----
+ include/asm-generic/bitops/instrumented-atomic.h   |  14 +-
+ include/asm-generic/bitops/instrumented-lock.h     |  10 +-
+ .../asm-generic/bitops/instrumented-non-atomic.h   |  16 +-
+ include/linux/atomic-fallback.h                    | 340 +++++-----
+ include/linux/capability.h                         |   4 +
+ include/linux/compiler-clang.h                     |  11 +-
+ include/linux/compiler-gcc.h                       |   6 +
+ include/linux/compiler.h                           |  66 +-
+ include/linux/crash_dump.h                         |   2 -
+ include/linux/edac.h                               |   8 -
+ include/linux/efi.h                                |   2 +-
+ include/linux/instrumented.h                       | 109 +++
+ include/linux/kcsan-checks.h                       | 251 +++++++
+ include/linux/kcsan.h                              |  72 ++
+ include/linux/linkage.h                            |   8 +-
+ include/linux/mm.h                                 |   7 -
+ include/linux/perf_event.h                         |   6 +-
+ include/linux/ras.h                                |   5 -
+ include/linux/sched.h                              |   4 +
+ include/linux/seqlock.h                            |  51 +-
+ include/linux/uaccess.h                            |  14 +-
+ include/uapi/linux/capability.h                    |   8 +-
+ init/do_mounts_initrd.c                            |  13 +-
+ init/init_task.c                                   |   9 +
+ init/main.c                                        |   2 +
+ kernel/Makefile                                    |   6 +
+ kernel/cpu.c                                       |   2 +-
+ kernel/crash_dump.c                                |   6 -
+ kernel/events/core.c                               |   6 +-
+ kernel/kcsan/Makefile                              |  14 +
+ kernel/kcsan/atomic.h                              |  27 +
+ kernel/kcsan/core.c                                | 730 +++++++++++++++++++++
+ kernel/kcsan/debugfs.c                             | 326 +++++++++
+ kernel/kcsan/encoding.h                            |  95 +++
+ kernel/kcsan/kcsan.h                               | 138 ++++
+ kernel/kcsan/report.c                              | 515 +++++++++++++++
+ kernel/kcsan/test.c                                | 131 ++++
+ kernel/locking/Makefile                            |   3 +
+ kernel/locking/rtmutex.c                           |   2 -
+ kernel/sched/Makefile                              |   6 +
+ kernel/smp.c                                       |   2 +-
+ kernel/trace/Makefile                              |   3 +
+ kernel/trace/bpf_trace.c                           |   2 +-
+ lib/Kconfig                                        |   3 +
+ lib/Kconfig.debug                                  |   7 +
+ lib/Kconfig.kcsan                                  | 156 +++++
+ lib/Makefile                                       |   4 +
+ lib/iov_iter.c                                     |   7 +-
+ lib/usercopy.c                                     |   7 +-
+ mm/Makefile                                        |   8 +
+ scripts/Makefile.kcsan                             |   6 +
+ scripts/Makefile.lib                               |  10 +
+ scripts/atomic/fallbacks/acquire                   |   2 +-
+ scripts/atomic/fallbacks/add_negative              |   2 +-
+ scripts/atomic/fallbacks/add_unless                |   2 +-
+ scripts/atomic/fallbacks/andnot                    |   2 +-
+ scripts/atomic/fallbacks/dec                       |   2 +-
+ scripts/atomic/fallbacks/dec_and_test              |   2 +-
+ scripts/atomic/fallbacks/dec_if_positive           |   2 +-
+ scripts/atomic/fallbacks/dec_unless_positive       |   2 +-
+ scripts/atomic/fallbacks/fence                     |   2 +-
+ scripts/atomic/fallbacks/fetch_add_unless          |   2 +-
+ scripts/atomic/fallbacks/inc                       |   2 +-
+ scripts/atomic/fallbacks/inc_and_test              |   2 +-
+ scripts/atomic/fallbacks/inc_not_zero              |   2 +-
+ scripts/atomic/fallbacks/inc_unless_negative       |   2 +-
+ scripts/atomic/fallbacks/read_acquire              |   2 +-
+ scripts/atomic/fallbacks/release                   |   2 +-
+ scripts/atomic/fallbacks/set_release               |   2 +-
+ scripts/atomic/fallbacks/sub_and_test              |   2 +-
+ scripts/atomic/fallbacks/try_cmpxchg               |   2 +-
+ scripts/atomic/gen-atomic-fallback.sh              |   2 +
+ scripts/atomic/gen-atomic-instrumented.sh          |   9 +-
+ scripts/atomic/gen-atomic-long.sh                  |   3 +-
+ scripts/link-vmlinux.sh                            |  24 +
+ scripts/x86-check-compiler.sh                      |   9 +
+ security/selinux/include/classmap.h                |   4 +-
+ tools/arch/x86/include/asm/orc_types.h             |   3 +-
+ tools/lib/api/fs/fs.c                              |  17 +
+ tools/lib/api/fs/fs.h                              |  12 +
+ tools/lib/traceevent/parse-filter.c                |  29 +-
+ tools/objtool/Documentation/stack-validation.txt   |  26 +
+ tools/objtool/Makefile                             |   5 +-
+ tools/objtool/arch.h                               |  15 +-
+ tools/objtool/arch/x86/decode.c                    |  44 +-
+ tools/objtool/arch/x86/include/cfi_regs.h          |  25 +
+ tools/objtool/builtin-check.c                      |  11 +-
+ tools/objtool/builtin.h                            |   2 +-
+ tools/objtool/cfi.h                                |  35 +-
+ tools/objtool/check.c                              | 652 +++++++++++-------
+ tools/objtool/check.h                              |  22 +-
+ tools/objtool/elf.c                                |  74 ++-
+ tools/objtool/elf.h                                |  42 +-
+ tools/objtool/orc_gen.c                            |  11 +-
+ tools/perf/Documentation/Makefile                  |   4 +-
+ tools/perf/Documentation/itrace.txt                |   1 +
+ tools/perf/Documentation/perf-bench.txt            |   8 +
+ tools/perf/Documentation/perf-c2c.txt              |  11 +
+ tools/perf/Documentation/perf-list.txt             |   8 +
+ tools/perf/Documentation/perf-report.txt           |  11 +
+ tools/perf/Documentation/perf-script.txt           |  11 +
+ tools/perf/Documentation/perf-top.txt              |   9 +
+ tools/perf/Documentation/perf.data-file-format.txt |  16 +
+ tools/perf/bench/Build                             |   2 +-
+ tools/perf/bench/bench.h                           |   2 +-
+ tools/perf/bench/synthesize.c                      | 101 +++
+ tools/perf/builtin-bench.c                         |   6 +
+ tools/perf/builtin-c2c.c                           |  12 +
+ tools/perf/builtin-ftrace.c                        |   5 +-
+ tools/perf/builtin-report.c                        |  15 +-
+ tools/perf/builtin-script.c                        | 318 +++------
+ tools/perf/builtin-stat.c                          |   5 +-
+ tools/perf/builtin-top.c                           |  11 +
+ tools/perf/design.txt                              |   3 +-
+ tools/perf/scripts/python/bin/flamegraph-record    |   2 +
+ tools/perf/scripts/python/bin/flamegraph-report    |   3 +
+ tools/perf/scripts/python/flamegraph.py            | 124 ++++
+ tools/perf/tests/expr.c                            |   4 +-
+ tools/perf/tests/parse-events.c                    |  17 +-
+ tools/perf/util/annotate.c                         |  20 +
+ tools/perf/util/arm-spe.c                          |   9 +
+ tools/perf/util/auxtrace.c                         |  94 ++-
+ tools/perf/util/auxtrace.h                         |  14 +
+ tools/perf/util/bpf-event.c                        |  93 +++
+ tools/perf/util/branch.h                           |  19 +-
+ tools/perf/util/callchain.h                        |   8 +
+ tools/perf/util/cap.h                              |   4 +
+ tools/perf/util/cs-etm.c                           |  11 +
+ tools/perf/util/dso.c                              |   1 +
+ tools/perf/util/dso.h                              |   1 +
+ tools/perf/util/env.h                              |   3 +
+ tools/perf/util/evlist.c                           |   6 +-
+ tools/perf/util/evsel.c                            |  35 +-
+ tools/perf/util/evsel.h                            |  18 +-
+ tools/perf/util/expr.c                             |  16 +-
+ tools/perf/util/expr.h                             |  16 +-
+ tools/perf/util/expr.l                             |  10 +-
+ tools/perf/util/expr.y                             |   6 +-
+ tools/perf/util/header.c                           | 108 +++
+ tools/perf/util/header.h                           |   1 +
+ tools/perf/util/hist.c                             |  23 +
+ tools/perf/util/intel-bts.c                        |  10 +
+ tools/perf/util/intel-pt.c                         |  95 ++-
+ tools/perf/util/machine.c                          | 434 ++++++++++--
+ tools/perf/util/metricgroup.c                      |  60 +-
+ tools/perf/util/parse-events.l                     |   1 +
+ tools/perf/util/parse-events.y                     |   9 +
+ tools/perf/util/pmu.c                              | 102 +++
+ tools/perf/util/pmu.h                              |   9 +
+ tools/perf/util/record.c                           |  62 ++
+ tools/perf/util/s390-cpumcf-kernel.h               |   1 +
+ tools/perf/util/s390-cpumsf.c                      |  11 +-
+ tools/perf/util/sort.c                             |   2 +-
+ tools/perf/util/sort.h                             |   2 +
+ tools/perf/util/stat-shadow.c                      |   2 +-
+ tools/perf/util/symbol.c                           |   1 +
+ tools/perf/util/synthetic-events.c                 |  22 +-
+ tools/perf/util/thread-stack.c                     |  57 ++
+ tools/perf/util/thread-stack.h                     |   3 +
+ tools/perf/util/thread.c                           |  24 +
+ tools/perf/util/thread.h                           |  15 +
+ tools/perf/util/top.h                              |   1 +
+ tools/perf/util/util.c                             |   1 +
+ .../testing/selftests/wireguard/qemu/debug.config  |   1 -
+ 293 files changed, 8427 insertions(+), 3324 deletions(-)
+ create mode 100644 Documentation/dev-tools/kcsan.rst
+ create mode 100644 arch/x86/purgatory/.gitignore
+ create mode 100644 drivers/firmware/efi/libstub/alignedmem.c
+ rename drivers/firmware/efi/libstub/{arm-stub.c => efi-stub.c} (96%)
+ create mode 100644 drivers/firmware/efi/libstub/relocate.c
+ create mode 100644 include/linux/instrumented.h
+ create mode 100644 include/linux/kcsan-checks.h
+ create mode 100644 include/linux/kcsan.h
+ create mode 100644 kernel/kcsan/Makefile
+ create mode 100644 kernel/kcsan/atomic.h
+ create mode 100644 kernel/kcsan/core.c
+ create mode 100644 kernel/kcsan/debugfs.c
+ create mode 100644 kernel/kcsan/encoding.h
+ create mode 100644 kernel/kcsan/kcsan.h
+ create mode 100644 kernel/kcsan/report.c
+ create mode 100644 kernel/kcsan/test.c
+ create mode 100644 lib/Kconfig.kcsan
+ create mode 100644 scripts/Makefile.kcsan
+ create mode 100755 scripts/x86-check-compiler.sh
+ create mode 100644 tools/objtool/arch/x86/include/cfi_regs.h
+ create mode 100644 tools/perf/bench/synthesize.c
+ create mode 100755 tools/perf/scripts/python/bin/flamegraph-record
+ create mode 100755 tools/perf/scripts/python/bin/flamegraph-report
+ create mode 100755 tools/perf/scripts/python/flamegraph.py
+Merging clockevents/timers/drivers/next (c1ac28a4de6f Revert "clocksource: Avoid creating dead devices")
+$ git merge clockevents/timers/drivers/next
+Merge made by the 'recursive' strategy.
+Merging edac/edac-for-next (dc63e28efa19 Merge branch 'edac-i10nm' into edac-for-next)
+$ git merge edac/edac-for-next
+Auto-merging drivers/edac/skx_common.c
+Auto-merging MAINTAINERS
+Merge made by the 'recursive' strategy.
+ MAINTAINERS                   |  1 -
+ drivers/edac/amd8131_edac.c   |  8 --------
+ drivers/edac/armada_xp_edac.c | 14 +++++++-------
+ drivers/edac/i10nm_base.c     | 27 +++++++++++++++++++++++----
+ drivers/edac/skx_base.c       | 13 +++++++++++--
+ drivers/edac/skx_common.c     | 11 +++++------
+ drivers/edac/skx_common.h     | 11 +++++++++--
+ drivers/edac/thunderx_edac.c  |  8 ++++----
+ drivers/edac/xgene_edac.c     |  3 ---
+ 9 files changed, 59 insertions(+), 37 deletions(-)
+Merging irqchip/irq/irqchip-next (4cea749d56be Revert "irqchip/xilinx: Enable generic irq multi handler")
+$ git merge irqchip/irq/irqchip-next
+Already up to date.
+Merging ftrace/for-next (d013496f99c5 tracing: Convert local functions in tracing_map.c to static)
+$ git merge ftrace/for-next
+Already up to date.
+Merging rcu/rcu/next (75080313dccc torture:  Remove qemu dependency on EFI firmware)
+$ git merge rcu/rcu/next
+Auto-merging tools/objtool/check.c
+Auto-merging net/core/sock.c
+Auto-merging kernel/trace/ftrace.c
+Auto-merging kernel/sched/core.c
+Auto-merging include/linux/compiler.h
+Auto-merging drivers/gpu/drm/drm_dp_mst_topology.c
+Auto-merging arch/x86/mm/pat/set_memory.c
+Auto-merging arch/x86/kvm/svm/svm.c
+Auto-merging arch/x86/kernel/Makefile
+Auto-merging arch/x86/Kconfig
+Auto-merging MAINTAINERS
+Auto-merging Documentation/admin-guide/kernel-parameters.txt
+Removing Documentation/RCU/rculist_nulls.txt
+Merge made by the 'recursive' strategy.
+ .../RCU/Design/Requirements/Requirements.rst       |   61 +-
+ Documentation/RCU/{checklist.txt => checklist.rst} |   17 +-
+ Documentation/RCU/index.rst                        |    9 +
+ .../RCU/{lockdep-splat.txt => lockdep-splat.rst}   |  109 +-
+ Documentation/RCU/{lockdep.txt => lockdep.rst}     |   12 +-
+ Documentation/RCU/rculist_nulls.rst                |  200 ++++
+ Documentation/RCU/rculist_nulls.txt                |  172 ---
+ Documentation/RCU/{rcuref.txt => rcuref.rst}       |  199 ++--
+ Documentation/RCU/{stallwarn.txt => stallwarn.rst} |   55 +-
+ Documentation/RCU/{torture.txt => torture.rst}     |  117 +-
+ Documentation/admin-guide/kernel-parameters.txt    |   33 +
+ Documentation/atomic_t.txt                         |   24 +-
+ Documentation/dev-tools/kcsan.rst                  |  228 ++--
+ Documentation/litmus-tests/README                  |   14 +
+ ...b__after_atomic-is-stronger-than-acquire.litmus |   32 +
+ ...Atomic-RMW-ops-are-atomic-WRT-atomic_set.litmus |   24 +
+ Documentation/litmus-tests/atomic/README           |   16 +
+ .../rcu}/MP+onceassign+derefonce.litmus            |    0
+ .../litmus-tests/rcu/RCU+sync+free.litmus          |   42 +
+ .../litmus-tests/rcu/RCU+sync+read.litmus          |   37 +
+ Documentation/locking/locktorture.rst              |    2 +-
+ MAINTAINERS                                        |    6 +-
+ arch/x86/Kconfig                                   |    1 +
+ arch/x86/kvm/svm/svm.c                             |    2 +-
+ arch/x86/mm/pat/set_memory.c                       |    2 +-
+ drivers/gpu/drm/drm_dp_mst_topology.c              |    2 +-
+ include/linux/compiler.h                           |    4 +-
+ include/linux/kcsan-checks.h                       |  261 ++++-
+ include/linux/kcsan.h                              |   19 +-
+ include/linux/rculist.h                            |    6 +-
+ include/linux/rculist_nulls.h                      |    2 +-
+ include/linux/rcupdate.h                           |   53 +-
+ include/linux/rcupdate_trace.h                     |   88 ++
+ include/linux/rcupdate_wait.h                      |   19 +
+ include/linux/rcutiny.h                            |    3 +-
+ include/linux/rcutree.h                            |    1 +
+ include/linux/sched.h                              |   10 +-
+ include/linux/torture.h                            |    7 +-
+ include/linux/wait.h                               |    2 +
+ init/init_task.c                                   |    6 +
+ kernel/fork.c                                      |   13 +-
+ kernel/kcsan/Makefile                              |    3 +
+ kernel/kcsan/atomic.h                              |   21 +-
+ kernel/kcsan/core.c                                |  183 ++-
+ kernel/kcsan/debugfs.c                             |   47 +-
+ kernel/kcsan/kcsan-test.c                          | 1067 +++++++++++++++++
+ kernel/kcsan/kcsan.h                               |    8 +-
+ kernel/kcsan/report.c                              |  455 +++++---
+ kernel/locking/locktorture.c                       |   14 +-
+ kernel/rcu/Kconfig                                 |   46 +-
+ kernel/rcu/Kconfig.debug                           |   15 +-
+ kernel/rcu/rcu.h                                   |    7 +
+ kernel/rcu/rcuperf.c                               |    5 +-
+ kernel/rcu/rcutorture.c                            |  285 ++++-
+ kernel/rcu/srcutree.c                              |   23 +-
+ kernel/rcu/tasks.h                                 | 1193 ++++++++++++++++++++
+ kernel/rcu/tree.c                                  |  188 ++-
+ kernel/rcu/tree.h                                  |    3 +
+ kernel/rcu/tree_exp.h                              |   50 +-
+ kernel/rcu/tree_plugin.h                           |   86 +-
+ kernel/rcu/tree_stall.h                            |  148 ++-
+ kernel/rcu/update.c                                |  406 +------
+ kernel/sched/core.c                                |   48 +
+ kernel/trace/Kconfig                               |    1 +
+ kernel/trace/ftrace.c                              |   17 +-
+ lib/Kconfig.kcsan                                  |   62 +-
+ mm/mmap.c                                          |    1 +
+ net/core/sock.c                                    |    4 +-
+ tools/memory-model/Documentation/explanation.txt   |   83 +-
+ tools/memory-model/Documentation/references.txt    |   21 +-
+ tools/memory-model/README                          |   10 +-
+ tools/memory-model/litmus-tests/.gitignore         |    2 +-
+ tools/memory-model/litmus-tests/README             |    3 -
+ tools/memory-model/scripts/README                  |   16 +-
+ tools/memory-model/scripts/checkalllitmus.sh       |   29 +-
+ tools/memory-model/scripts/checkghlitmus.sh        |   11 +-
+ tools/memory-model/scripts/checklitmus.sh          |   25 +-
+ tools/memory-model/scripts/checklitmushist.sh      |    2 +-
+ tools/memory-model/scripts/checktheselitmus.sh     |   43 +
+ tools/memory-model/scripts/cmplitmushist.sh        |   49 +-
+ tools/memory-model/scripts/hwfnseg.sh              |   20 +
+ tools/memory-model/scripts/initlitmushist.sh       |    2 +-
+ tools/memory-model/scripts/judgelitmus.sh          |  120 +-
+ tools/memory-model/scripts/newlitmushist.sh        |    4 +-
+ tools/memory-model/scripts/parseargs.sh            |   21 +-
+ tools/memory-model/scripts/runlitmus.sh            |   80 ++
+ tools/memory-model/scripts/runlitmushist.sh        |   29 +-
+ tools/memory-model/scripts/simpletest.sh           |   35 +
+ tools/objtool/check.c                              |    4 +
+ .../testing/selftests/rcutorture/bin/functions.sh  |   21 +-
+ .../selftests/rcutorture/bin/kcsan-collapse.sh     |   22 +
+ .../selftests/rcutorture/bin/kvm-recheck-rcu.sh    |   16 +-
+ .../selftests/rcutorture/bin/kvm-recheck.sh        |   10 +
+ .../selftests/rcutorture/bin/kvm-test-1-run.sh     |   53 +-
+ tools/testing/selftests/rcutorture/bin/kvm.sh      |   11 +
+ .../selftests/rcutorture/bin/parse-console.sh      |   18 +-
+ .../selftests/rcutorture/configs/rcu/CFLIST        |    3 +
+ .../selftests/rcutorture/configs/rcu/RUDE01        |   10 +
+ .../selftests/rcutorture/configs/rcu/RUDE01.boot   |    1 +
+ .../selftests/rcutorture/configs/rcu/TRACE01       |   11 +
+ .../selftests/rcutorture/configs/rcu/TRACE01.boot  |    1 +
+ .../selftests/rcutorture/configs/rcu/TRACE02       |   11 +
+ .../selftests/rcutorture/configs/rcu/TRACE02.boot  |    1 +
+ .../selftests/rcutorture/configs/rcu/TREE10        |    2 +-
+ 104 files changed, 5478 insertions(+), 1618 deletions(-)
+ rename Documentation/RCU/{checklist.txt => checklist.rst} (98%)
+ rename Documentation/RCU/{lockdep-splat.txt => lockdep-splat.rst} (54%)
+ rename Documentation/RCU/{lockdep.txt => lockdep.rst} (96%)
+ create mode 100644 Documentation/RCU/rculist_nulls.rst
+ delete mode 100644 Documentation/RCU/rculist_nulls.txt
+ rename Documentation/RCU/{rcuref.txt => rcuref.rst} (50%)
+ rename Documentation/RCU/{stallwarn.txt => stallwarn.rst} (90%)
+ rename Documentation/RCU/{torture.txt => torture.rst} (76%)
+ create mode 100644 Documentation/litmus-tests/README
+ create mode 100644 Documentation/litmus-tests/atomic/Atomic-RMW+mb__after_atomic-is-stronger-than-acquire.litmus
+ create mode 100644 Documentation/litmus-tests/atomic/Atomic-RMW-ops-are-atomic-WRT-atomic_set.litmus
+ create mode 100644 Documentation/litmus-tests/atomic/README
+ rename {tools/memory-model/litmus-tests => Documentation/litmus-tests/rcu}/MP+onceassign+derefonce.litmus (100%)
+ create mode 100644 Documentation/litmus-tests/rcu/RCU+sync+free.litmus
+ create mode 100644 Documentation/litmus-tests/rcu/RCU+sync+read.litmus
+ create mode 100644 include/linux/rcupdate_trace.h
+ create mode 100644 kernel/kcsan/kcsan-test.c
+ create mode 100644 kernel/rcu/tasks.h
+ create mode 100755 tools/memory-model/scripts/checktheselitmus.sh
+ create mode 100755 tools/memory-model/scripts/hwfnseg.sh
+ create mode 100755 tools/memory-model/scripts/runlitmus.sh
+ create mode 100755 tools/memory-model/scripts/simpletest.sh
+ create mode 100755 tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh
+ create mode 100644 tools/testing/selftests/rcutorture/configs/rcu/RUDE01
+ create mode 100644 tools/testing/selftests/rcutorture/configs/rcu/RUDE01.boot
+ create mode 100644 tools/testing/selftests/rcutorture/configs/rcu/TRACE01
+ create mode 100644 tools/testing/selftests/rcutorture/configs/rcu/TRACE01.boot
+ create mode 100644 tools/testing/selftests/rcutorture/configs/rcu/TRACE02
+ create mode 100644 tools/testing/selftests/rcutorture/configs/rcu/TRACE02.boot
+Merging kvm/linux-next (7c67f54661fc KVM: SVM: do not allow VMRUN inside SMM)
+$ git merge kvm/linux-next
+Removing tools/testing/selftests/kvm/x86_64/set_memory_region_test.c
+Auto-merging tools/testing/selftests/kvm/.gitignore
+Auto-merging include/uapi/linux/kvm.h
+Auto-merging include/linux/kvm_host.h
+Auto-merging arch/x86/kvm/x86.c
+Auto-merging arch/x86/kvm/vmx/vmx.c
+Auto-merging arch/x86/kvm/svm/svm.c
+CONFLICT (content): Merge conflict in arch/x86/kvm/svm/svm.c
+Auto-merging arch/x86/kvm/mmu/mmu.c
+Resolved 'arch/x86/kvm/svm/svm.c' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+[master 18ac744c2dd2] Merge remote-tracking branch 'kvm/linux-next'
+$ git diff -M --stat --summary HEAD^..
+ Documentation/virt/kvm/api.rst                     |  17 +
+ Documentation/virt/kvm/nested-vmx.rst              |   5 +-
+ arch/arm64/kvm/guest.c                             |  23 +-
+ arch/mips/kvm/mips.c                               |  64 +--
+ arch/powerpc/kvm/book3s.c                          |  61 ++-
+ arch/powerpc/kvm/booke.c                           |  41 +-
+ arch/powerpc/kvm/powerpc.c                         |   3 +-
+ arch/s390/kvm/kvm-s390.c                           | 206 +++++----
+ arch/x86/include/asm/kvm_host.h                    |  63 ++-
+ arch/x86/kvm/cpuid.c                               |   3 +
+ arch/x86/kvm/hyperv.c                              |   7 +-
+ arch/x86/kvm/lapic.c                               |  61 ++-
+ arch/x86/kvm/lapic.h                               |   7 +-
+ arch/x86/kvm/mmu/mmu.c                             | 226 ++++-----
+ arch/x86/kvm/mmu/paging_tmpl.h                     |   2 +-
+ arch/x86/kvm/svm/nested.c                          |  18 +-
+ arch/x86/kvm/svm/svm.c                             |  85 +++-
+ arch/x86/kvm/svm/svm.h                             |   5 +-
+ arch/x86/kvm/vmx/evmcs.c                           |  32 +-
+ arch/x86/kvm/vmx/nested.c                          | 503 +++++++++++++--------
+ arch/x86/kvm/vmx/nested.h                          |  41 +-
+ arch/x86/kvm/vmx/ops.h                             |  32 +-
+ arch/x86/kvm/vmx/vmcs12.c                          |   4 -
+ arch/x86/kvm/vmx/vmcs12.h                          |  10 +-
+ arch/x86/kvm/vmx/vmx.c                             | 243 ++++++----
+ arch/x86/kvm/vmx/vmx.h                             |  54 ++-
+ arch/x86/kvm/x86.c                                 | 198 ++++----
+ arch/x86/kvm/x86.h                                 |   6 +
+ include/linux/kvm_host.h                           |  14 +-
+ include/uapi/linux/kvm.h                           |   1 +
+ tools/kvm/kvm_stat/kvm_stat                        |  84 +++-
+ tools/kvm/kvm_stat/kvm_stat.service                |  16 +
+ tools/kvm/kvm_stat/kvm_stat.txt                    |  15 +-
+ tools/testing/selftests/kvm/.gitignore             |   2 +-
+ tools/testing/selftests/kvm/Makefile               |   4 +-
+ tools/testing/selftests/kvm/include/kvm_util.h     |  28 +-
+ tools/testing/selftests/kvm/lib/kvm_util.c         | 154 ++++---
+ .../testing/selftests/kvm/lib/kvm_util_internal.h  |   8 +-
+ tools/testing/selftests/kvm/lib/s390x/processor.c  |   5 +-
+ .../testing/selftests/kvm/set_memory_region_test.c | 408 +++++++++++++++++
+ .../selftests/kvm/x86_64/set_memory_region_test.c  | 141 ------
+ virt/kvm/arm/arm.c                                 |   6 +-
+ virt/kvm/kvm_main.c                                |  33 +-
+ 43 files changed, 1844 insertions(+), 1095 deletions(-)
+ create mode 100644 tools/kvm/kvm_stat/kvm_stat.service
+ create mode 100644 tools/testing/selftests/kvm/set_memory_region_test.c
+ delete mode 100644 tools/testing/selftests/kvm/x86_64/set_memory_region_test.c
+Merging kvm-arm/next (463050599742 Merge tag 'kvm-arm-removal' into kvmarm-master/next)
+$ git merge kvm-arm/next
+Already up to date.
+Merging kvm-ppc/kvm-ppc-next (9a5788c615f5 KVM: PPC: Book3S HV: Add a capability for enabling secure guests)
+$ git merge kvm-ppc/kvm-ppc-next
+Already up to date.
+Merging kvms390/next (0b545fd17f84 KVM: s390: remove unneeded semicolon in gisa_vcpu_kicker())
+$ git merge kvms390/next
+Merge made by the 'recursive' strategy.
+ arch/s390/kvm/interrupt.c |  2 +-
+ arch/s390/kvm/vsie.c      |  3 +--
+ arch/s390/mm/gmap.c       | 10 +++++-----
+ 3 files changed, 7 insertions(+), 8 deletions(-)
+Merging xen-tip/linux-next (74f4c438f22c arm/xen: make _xen_start_info static)
+$ git merge xen-tip/linux-next
+Already up to date.
+Merging percpu/for-next (dedac37ea96b Merge branch 'for-5.7' into for-next)
+$ git merge percpu/for-next
+Already up to date!
+Merge made by the 'recursive' strategy.
+Merging workqueues/for-next (4acf8a423cd3 Merge branch 'for-5.7' into for-next)
+$ git merge workqueues/for-next
+Already up to date!
+Merge made by the 'recursive' strategy.
+Merging drivers-x86/for-next (14232c6e788c platform/x86: thinkpad_acpi: Add support for dual fan control)
+$ git merge drivers-x86/for-next
+Removing drivers/platform/x86/intel_pmc_ipc.c
+Auto-merging drivers/base/core.c
+Removing arch/x86/include/asm/intel_pmc_ipc.h
+Auto-merging arch/x86/Kconfig
+Auto-merging MAINTAINERS
+Merge made by the 'recursive' strategy.
+ .../ABI/obsolete/sysfs-driver-intel_pmc_bxt        |  22 +
+ MAINTAINERS                                        |  23 +-
+ arch/x86/Kconfig                                   |   2 +-
+ arch/x86/include/asm/intel-mid.h                   |   9 +-
+ arch/x86/include/asm/intel_pmc_ipc.h               |  59 --
+ arch/x86/include/asm/intel_scu_ipc.h               | 114 +--
+ arch/x86/include/asm/intel_scu_ipc_legacy.h        |  91 ++
+ arch/x86/include/asm/intel_telemetry.h             |   6 +-
+ drivers/base/core.c                                |   1 +
+ drivers/base/swnode.c                              |  48 ++
+ drivers/mfd/Kconfig                                |  20 +-
+ drivers/mfd/Makefile                               |   1 +
+ drivers/mfd/intel_pmc_bxt.c                        | 468 ++++++++++
+ drivers/mfd/intel_soc_pmic_bxtwc.c                 |  34 +-
+ drivers/mfd/intel_soc_pmic_mrfld.c                 |  10 +-
+ drivers/platform/x86/Kconfig                       |  46 +-
+ drivers/platform/x86/Makefile                      |   2 +-
+ drivers/platform/x86/asus-nb-wmi.c                 |  24 +
+ drivers/platform/x86/intel_cht_int33fe_typec.c     | 106 +--
+ drivers/platform/x86/intel_mid_powerbtn.c          |  15 +-
+ drivers/platform/x86/intel_pmc_core.c              |   6 +-
+ drivers/platform/x86/intel_pmc_ipc.c               | 949 ---------------------
+ drivers/platform/x86/intel_scu_ipc.c               | 447 +++++++---
+ drivers/platform/x86/intel_scu_ipcutil.c           |  43 +-
+ drivers/platform/x86/intel_scu_pcidrv.c            |  68 ++
+ drivers/platform/x86/intel_telemetry_core.c        |  17 +-
+ drivers/platform/x86/intel_telemetry_debugfs.c     |  15 +-
+ drivers/platform/x86/intel_telemetry_pltdrv.c      |  97 ++-
+ drivers/platform/x86/thinkpad_acpi.c               |  43 +-
+ drivers/platform/x86/touchscreen_dmi.c             |  77 ++
+ drivers/platform/x86/wmi.c                         |  45 +-
+ drivers/usb/typec/mux/Kconfig                      |   2 +-
+ drivers/usb/typec/mux/intel_pmc_mux.c              |  12 +-
+ drivers/usb/typec/tcpm/Kconfig                     |   2 +-
+ drivers/watchdog/iTCO_wdt.c                        |  25 +-
+ drivers/watchdog/intel-mid_wdt.c                   |  53 +-
+ include/linux/mfd/intel_pmc_bxt.h                  |  53 ++
+ include/linux/mfd/intel_soc_pmic.h                 |  15 +
+ include/linux/platform_data/itco_wdt.h             |  11 +-
+ include/linux/property.h                           |   3 +
+ 40 files changed, 1682 insertions(+), 1402 deletions(-)
+ create mode 100644 Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
+ delete mode 100644 arch/x86/include/asm/intel_pmc_ipc.h
+ create mode 100644 arch/x86/include/asm/intel_scu_ipc_legacy.h
+ create mode 100644 drivers/mfd/intel_pmc_bxt.c
+ delete mode 100644 drivers/platform/x86/intel_pmc_ipc.c
+ create mode 100644 drivers/platform/x86/intel_scu_pcidrv.c
+ create mode 100644 include/linux/mfd/intel_pmc_bxt.h
+Merging chrome-platform/for-next (9d33ea331032 platform/chrome: cros_ec_typec: Register port partner)
+$ git merge chrome-platform/for-next
+Merge made by the 'recursive' strategy.
+ drivers/platform/chrome/Kconfig            |   1 +
+ drivers/platform/chrome/chromeos_pstore.c  |   1 +
+ drivers/platform/chrome/cros_ec_ishtp.c    |  45 ++++++++---
+ drivers/platform/chrome/cros_ec_typec.c    | 119 ++++++++++++++++++++++++-----
+ drivers/platform/chrome/wilco_ec/debugfs.c |   7 +-
+ 5 files changed, 143 insertions(+), 30 deletions(-)
+Merging hsi/for-next (bb6d3fb354c5 Linux 5.6-rc1)
+$ git merge hsi/for-next
+Already up to date.
+Merging leds/for-next (c85c7cdef3c9 leds: trigger: remove redundant assignment to variable ret)
+$ git merge leds/for-next
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/leds/leds-sgm3140.yaml     |  62 ++++
+ drivers/leds/Kconfig                               |  19 ++
+ drivers/leds/Makefile                              |   2 +
+ drivers/leds/leds-ariel.c                          | 133 +++++++++
+ drivers/leds/leds-lm355x.c                         |   1 -
+ drivers/leds/leds-lp3952.c                         |   2 +-
+ drivers/leds/leds-lt3593.c                         |   1 -
+ drivers/leds/leds-netxbig.c                        | 148 +++++-----
+ drivers/leds/leds-pwm.c                            |  16 +-
+ drivers/leds/leds-sgm3140.c                        | 320 +++++++++++++++++++++
+ drivers/leds/leds-tca6507.c                        |   2 +-
+ drivers/leds/leds-tlc591xx.c                       |   5 +-
+ drivers/leds/trigger/ledtrig-timer.c               |   4 +-
+ 13 files changed, 635 insertions(+), 80 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
+ create mode 100644 drivers/leds/leds-ariel.c
+ create mode 100644 drivers/leds/leds-sgm3140.c
+Merging ipmi/for-next (900b217c7c8e ipmi: Replace guid_copy() with import_guid() where it makes sense)
+$ git merge ipmi/for-next
+Merge made by the 'recursive' strategy.
+ drivers/char/ipmi/bt-bmc.c          | 9 +++------
+ drivers/char/ipmi/ipmi_msghandler.c | 9 +++++----
+ 2 files changed, 8 insertions(+), 10 deletions(-)
+Merging driver-core/driver-core-next (48ebea5026d6 firmware_loader: move fw_fallback_config to a private kernel symbol namespace)
+$ git merge driver-core/driver-core-next
+Auto-merging drivers/base/platform.c
+Auto-merging drivers/base/dd.c
+CONFLICT (content): Merge conflict in drivers/base/dd.c
+Recorded preimage for 'drivers/base/dd.c'
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+Recorded resolution for 'drivers/base/dd.c'.
+[master bd1c5a969545] Merge remote-tracking branch 'driver-core/driver-core-next'
+$ git diff -M --stat --summary HEAD^..
+ Documentation/driver-api/driver-model/driver.rst | 32 ++++++++++++++++++++----
+ drivers/base/dd.c                                | 28 ++++++++++-----------
+ drivers/base/firmware_loader/fallback.c          |  3 +++
+ drivers/base/firmware_loader/fallback_table.c    |  2 +-
+ drivers/base/firmware_loader/main.c              |  3 ---
+ drivers/base/platform.c                          |  2 +-
+ drivers/base/soc.c                               |  2 +-
+ fs/debugfs/internal.h                            |  2 +-
+ fs/kernfs/file.c                                 |  2 +-
+ include/linux/firmware.h                         |  1 -
+ lib/test_firmware.c                              | 26 +++----------------
+ 11 files changed, 51 insertions(+), 52 deletions(-)
+Merging usb/usb-next (b9cf2cb52433 usb: core: hub: use true,false for bool variable)
+$ git merge usb/usb-next
+Merge made by the 'recursive' strategy.
+ drivers/gpio/gpiolib-of.c                  |  21 +++
+ drivers/usb/cdns3/core.c                   |  47 +-----
+ drivers/usb/cdns3/core.h                   |   2 -
+ drivers/usb/cdns3/drd.c                    |   4 +-
+ drivers/usb/cdns3/gadget.c                 |  22 +--
+ drivers/usb/core/hub.c                     |   2 +-
+ drivers/usb/core/hub.h                     |   2 +-
+ drivers/usb/core/otg_whitelist.h           |   2 +-
+ drivers/usb/core/sysfs.c                   |   6 +-
+ drivers/usb/core/usb.h                     |   2 +-
+ drivers/usb/dwc2/core.h                    |   2 +-
+ drivers/usb/dwc2/debug.h                   |   2 +-
+ drivers/usb/dwc2/hcd.h                     |   2 +-
+ drivers/usb/dwc2/hw.h                      |   2 +-
+ drivers/usb/early/xhci-dbc.c               |   1 -
+ drivers/usb/early/xhci-dbc.h               |   2 +-
+ drivers/usb/gadget/legacy/inode.c          |   3 +-
+ drivers/usb/gadget/udc/gr_udc.c            |   1 -
+ drivers/usb/host/ehci-fsl.h                |   2 +-
+ drivers/usb/host/ehci-tegra.c              |   1 -
+ drivers/usb/host/ehci.h                    |   2 +-
+ drivers/usb/host/fhci.h                    |   2 +-
+ drivers/usb/host/imx21-hcd.h               |   2 +-
+ drivers/usb/host/ohci.h                    |   2 +-
+ drivers/usb/host/pci-quirks.c              |   8 +-
+ drivers/usb/host/r8a66597.h                |   2 +-
+ drivers/usb/host/u132-hcd.c                |  10 --
+ drivers/usb/host/xhci-debugfs.h            |   2 +-
+ drivers/usb/host/xhci-ext-caps.h           |   2 +-
+ drivers/usb/host/xhci-mtk.h                |   2 +-
+ drivers/usb/host/xhci-mvebu.h              |   2 +-
+ drivers/usb/host/xhci-plat.h               |   2 +-
+ drivers/usb/host/xhci-rcar.h               |   2 +-
+ drivers/usb/host/xhci-trace.h              |   2 +-
+ drivers/usb/host/xhci.h                    |   2 +-
+ drivers/usb/isp1760/isp1760-core.h         |   2 +-
+ drivers/usb/isp1760/isp1760-regs.h         |   2 +-
+ drivers/usb/isp1760/isp1760-udc.h          |   2 +-
+ drivers/usb/misc/sisusbvga/sisusb.h        |   2 +-
+ drivers/usb/misc/sisusbvga/sisusb_init.h   |   2 +-
+ drivers/usb/misc/sisusbvga/sisusb_struct.h |   2 +-
+ drivers/usb/misc/usb_u132.h                |   2 +-
+ drivers/usb/mtu3/mtu3.h                    |   2 +-
+ drivers/usb/mtu3/mtu3_debug.h              |   2 +-
+ drivers/usb/mtu3/mtu3_dr.h                 |   2 +-
+ drivers/usb/mtu3/mtu3_hw_regs.h            |   2 +-
+ drivers/usb/mtu3/mtu3_qmu.h                |   2 +-
+ drivers/usb/mtu3/mtu3_trace.h              |   2 +-
+ drivers/usb/musb/davinci.h                 |   2 +-
+ drivers/usb/musb/musb_core.h               |   2 +-
+ drivers/usb/musb/musb_debug.h              |   2 +-
+ drivers/usb/musb/musb_dma.h                |   2 +-
+ drivers/usb/musb/musb_gadget.h             |   2 +-
+ drivers/usb/musb/musb_host.h               |   2 +-
+ drivers/usb/musb/musb_io.h                 |   2 +-
+ drivers/usb/musb/musb_regs.h               |   2 +-
+ drivers/usb/musb/musb_trace.h              |   2 +-
+ drivers/usb/musb/omap2430.h                |   2 +-
+ drivers/usb/musb/tusb6010.h                |   2 +-
+ drivers/usb/phy/phy-fsl-usb.h              |   2 +-
+ drivers/usb/phy/phy-jz4770.c               |  12 +-
+ drivers/usb/phy/phy-mv-usb.h               |   2 +-
+ drivers/usb/renesas_usbhs/common.h         |   2 +-
+ drivers/usb/renesas_usbhs/fifo.h           |   2 +-
+ drivers/usb/renesas_usbhs/mod.h            |   2 +-
+ drivers/usb/renesas_usbhs/pipe.h           |   2 +-
+ drivers/usb/renesas_usbhs/rcar2.h          |   2 +-
+ drivers/usb/renesas_usbhs/rcar3.h          |   2 +-
+ drivers/usb/renesas_usbhs/rza.h            |   2 +-
+ drivers/usb/storage/debug.h                |   2 +-
+ drivers/usb/storage/initializers.h         |   2 +-
+ drivers/usb/storage/protocol.h             |   2 +-
+ drivers/usb/storage/scsiglue.h             |   2 +-
+ drivers/usb/storage/transport.h            |   2 +-
+ drivers/usb/storage/unusual_alauda.h       |   2 +-
+ drivers/usb/storage/unusual_cypress.h      |   2 +-
+ drivers/usb/storage/unusual_datafab.h      |   2 +-
+ drivers/usb/storage/unusual_devs.h         |   2 +-
+ drivers/usb/storage/unusual_ene_ub6250.h   |   2 +-
+ drivers/usb/storage/unusual_freecom.h      |   2 +-
+ drivers/usb/storage/unusual_isd200.h       |   2 +-
+ drivers/usb/storage/unusual_jumpshot.h     |   2 +-
+ drivers/usb/storage/unusual_karma.h        |   2 +-
+ drivers/usb/storage/unusual_onetouch.h     |   2 +-
+ drivers/usb/storage/unusual_realtek.h      |   2 +-
+ drivers/usb/storage/unusual_sddr09.h       |   2 +-
+ drivers/usb/storage/unusual_sddr55.h       |   2 +-
+ drivers/usb/storage/unusual_uas.h          |   2 +-
+ drivers/usb/storage/unusual_usbat.h        |   2 +-
+ drivers/usb/storage/usb.h                  |   2 +-
+ drivers/usb/typec/tcpm/fusb302.c           |  32 ++--
+ drivers/usb/typec/tcpm/fusb302_reg.h       |   2 +-
+ drivers/usb/typec/ucsi/Makefile            |   4 +
+ drivers/usb/typec/ucsi/psy.c               | 241 +++++++++++++++++++++++++++++
+ drivers/usb/typec/ucsi/trace.c             |  10 +-
+ drivers/usb/typec/ucsi/ucsi.c              |  41 ++++-
+ drivers/usb/typec/ucsi/ucsi.h              |  26 +++-
+ 97 files changed, 456 insertions(+), 192 deletions(-)
+ create mode 100644 drivers/usb/typec/ucsi/psy.c
+Merging usb-gadget/next (4a5dbd900957 dt-bindings: usb: add documentation for aspeed usb-vhub)
+$ git merge usb-gadget/next
+Already up to date.
+Merging usb-serial/usb-next (788a4ee607e8 USB: serial: Use the correct style for SPDX License Identifier)
+$ git merge usb-serial/usb-next
+Merge made by the 'recursive' strategy.
+ drivers/usb/serial/belkin_sa.h   | 2 +-
+ drivers/usb/serial/io_16654.h    | 2 +-
+ drivers/usb/serial/io_edgeport.h | 2 +-
+ drivers/usb/serial/io_ionsp.h    | 2 +-
+ drivers/usb/serial/io_ti.h       | 2 +-
+ drivers/usb/serial/io_usbvend.h  | 2 +-
+ drivers/usb/serial/iuu_phoenix.h | 2 +-
+ drivers/usb/serial/mct_u232.h    | 2 +-
+ drivers/usb/serial/oti6858.h     | 2 +-
+ drivers/usb/serial/pl2303.h      | 2 +-
+ drivers/usb/serial/visor.h       | 2 +-
+ drivers/usb/serial/whiteheat.h   | 2 +-
+ 12 files changed, 12 insertions(+), 12 deletions(-)
+Merging usb-chipidea-next/ci-for-usb-next (4ee2fc81a631 usb: chipidea: usb2: remove unneeded semicolon)
+$ git merge usb-chipidea-next/ci-for-usb-next
+Removing drivers/usb/chipidea/ci_hdrc_zevio.c
+Merge made by the 'recursive' strategy.
+ drivers/usb/chipidea/Kconfig         | 37 ++++++++++++++------
+ drivers/usb/chipidea/Makefile        | 13 +++----
+ drivers/usb/chipidea/ci_hdrc_usb2.c  | 30 +++++++++-------
+ drivers/usb/chipidea/ci_hdrc_zevio.c | 67 ------------------------------------
+ drivers/usb/chipidea/core.c          | 42 +++++-----------------
+ drivers/usb/chipidea/udc.h           |  5 +--
+ 6 files changed, 58 insertions(+), 136 deletions(-)
+ delete mode 100644 drivers/usb/chipidea/ci_hdrc_zevio.c
+Merging phy-next/next (2f29298bc2d9 phy: qcom: qmp: Add SM8250 UFS PHY)
+$ git merge phy-next/next
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/phy/qcom-qmp-phy.txt       |  5 ++
+ drivers/phy/qualcomm/phy-qcom-qmp.c                |  3 ++
+ drivers/phy/ti/phy-j721e-wiz.c                     | 59 ++++++++++++++++++++--
+ 3 files changed, 63 insertions(+), 4 deletions(-)
+Merging tty/tty-next (e2bd1dcbe1aa tty: hvc: Fix data abort due to race in hvc_open)
+$ git merge tty/tty-next
+Merge made by the 'recursive' strategy.
+ drivers/tty/hvc/hvc_console.c       |  16 ++++-
+ drivers/tty/hvc/hvcs.c              |   2 -
+ drivers/tty/rocket.c                |  10 ++-
+ drivers/tty/serial/8250/serial_cs.c |   6 +-
+ drivers/tty/serial/fsl_lpuart.c     |  16 ++---
+ drivers/tty/serial/lpc32xx_hs.c     |   1 -
+ drivers/tty/serial/omap-serial.c    |  48 ++++++-------
+ drivers/tty/serial/sh-sci.h         |   1 -
+ drivers/tty/serial/xilinx_uartps.c  |  12 +++-
+ drivers/tty/vcc.c                   |   1 +
+ drivers/tty/vt/selection.c          | 133 +++++++++++++++++++-----------------
+ 11 files changed, 135 insertions(+), 111 deletions(-)
+Merging char-misc/char-misc-next (48a4cc950348 Merge 5.7-rc3 into char-misc-next)
+$ git merge char-misc/char-misc-next
+Auto-merging drivers/parport/procfs.c
+Merge made by the 'recursive' strategy.
+ drivers/android/binderfs.c          |   4 +-
+ drivers/char/tlclk.c                |  17 ++-
+ drivers/misc/cardreader/rts5261.c   |   9 +-
+ drivers/misc/lkdtm/bugs.c           |   2 +-
+ drivers/misc/mic/scif/scif_nodeqp.c |   2 +-
+ drivers/misc/sgi-xp/xpc_main.c      |  10 +-
+ drivers/misc/sgi-xp/xpnet.c         |   8 +-
+ drivers/misc/xilinx_sdfec.c         |  11 +-
+ drivers/parport/daisy.c             |  29 +---
+ drivers/parport/ieee1284.c          |  94 +++++-------
+ drivers/parport/ieee1284_ops.c      |  70 +++------
+ drivers/parport/parport_amiga.c     |  22 +--
+ drivers/parport/parport_atari.c     |   2 +-
+ drivers/parport/parport_cs.c        |   6 +-
+ drivers/parport/parport_gsc.c       |  25 +--
+ drivers/parport/parport_gsc.h       |  21 ++-
+ drivers/parport/parport_ip32.c      | 117 +++++++--------
+ drivers/parport/parport_mfc3.c      |  21 +--
+ drivers/parport/parport_pc.c        | 263 ++++++++++++++------------------
+ drivers/parport/parport_sunbpp.c    |   2 +-
+ drivers/parport/probe.c             |  34 ++---
+ drivers/parport/procfs.c            |   6 +-
+ drivers/parport/share.c             | 292 +++++++++---------------------------
+ drivers/visorbus/controlvmchannel.h |   2 +-
+ drivers/visorbus/vbuschannel.h      |   2 +-
+ drivers/visorbus/visorbus_private.h |   2 +-
+ include/linux/parport.h             |  16 +-
+ 27 files changed, 408 insertions(+), 681 deletions(-)
+Merging extcon/extcon-next (108339e7a4fe extcon: remove redundant assignment to variable idx)
+$ git merge extcon/extcon-next
+Merge made by the 'recursive' strategy.
+ drivers/extcon/extcon.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+Merging soundwire/next (2978a43e7690 soundwire: intel: Make sdw_intel_init static)
+$ git merge soundwire/next
+Merge made by the 'recursive' strategy.
+ drivers/soundwire/intel_init.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+Merging thunderbolt/next (57d8df68eb53 thunderbolt: Add support for Intel Tiger Lake)
+$ git merge thunderbolt/next
+Merge made by the 'recursive' strategy.
+ drivers/thunderbolt/icm.c    | 22 ++++++++++++++++++++++
+ drivers/thunderbolt/nhi.c    |  4 ++++
+ drivers/thunderbolt/nhi.h    |  2 ++
+ drivers/thunderbolt/switch.c |  7 -------
+ 4 files changed, 28 insertions(+), 7 deletions(-)
+Merging staging/staging-next (d97a9d7aea04 staging/speakup: Add inflection synth parameter)
+$ git merge staging/staging-next
+Removing drivers/staging/vt6656/firmware.h
+Removing drivers/staging/vt6656/firmware.c
+Auto-merging drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
+Removing drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.txt
+Auto-merging MAINTAINERS
+Removing Documentation/devicetree/bindings/iio/light/vcnl4000.txt
+Removing Documentation/devicetree/bindings/iio/light/tsl2563.txt
+Removing Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
+Removing Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+Merge made by the 'recursive' strategy.
+ Documentation/ABI/testing/sysfs-bus-iio-proximity  |   10 +
+ Documentation/ABI/testing/sysfs-bus-iio-sx9310     |   10 +
+ .../devicetree/bindings/iio/adc/adi,ad9467.yaml    |   65 ++
+ .../devicetree/bindings/iio/adc/adi,axi-adc.yaml   |   62 ++
+ .../devicetree/bindings/iio/adc/maxim,max1241.yaml |   63 ++
+ .../bindings/iio/adc/rockchip-saradc.txt           |   37 -
+ .../bindings/iio/adc/rockchip-saradc.yaml          |   80 ++
+ Documentation/devicetree/bindings/iio/common.yaml  |   35 +
+ .../devicetree/bindings/iio/dac/st,stm32-dac.txt   |   63 --
+ .../devicetree/bindings/iio/dac/st,stm32-dac.yaml  |  110 ++
+ .../devicetree/bindings/iio/gyroscope/bmg160.txt   |    2 +-
+ .../bindings/iio/light/amstaos,tsl2563.yaml        |   49 +
+ .../devicetree/bindings/iio/light/tsl2563.txt      |   19 -
+ .../devicetree/bindings/iio/light/vcnl4000.txt     |   24 -
+ .../bindings/iio/light/vishay,vcnl4000.yaml        |   50 +
+ .../devicetree/bindings/iio/st-sensors.txt         |    1 +
+ Documentation/driver-api/driver-model/devres.rst   |    8 -
+ Documentation/driver-api/iio/triggers.rst          |    2 -
+ MAINTAINERS                                        |    2 +
+ drivers/iio/accel/Kconfig                          |    2 +-
+ drivers/iio/accel/kxsd9-i2c.c                      |    4 +-
+ drivers/iio/accel/mxc4005.c                        |    4 +-
+ drivers/iio/accel/st_accel.h                       |    2 +
+ drivers/iio/accel/st_accel_buffer.c                |    3 +-
+ drivers/iio/accel/st_accel_core.c                  |   83 +-
+ drivers/iio/accel/st_accel_i2c.c                   |    5 +
+ drivers/iio/adc/Kconfig                            |   45 +
+ drivers/iio/adc/Makefile                           |    3 +
+ drivers/iio/adc/ad7476.c                           |   59 +-
+ drivers/iio/adc/ad7780.c                           |   27 +-
+ drivers/iio/adc/ad7791.c                           |   64 +-
+ drivers/iio/adc/ad7793.c                           |  144 ++-
+ drivers/iio/adc/ad9467.c                           |  422 ++++++++
+ drivers/iio/adc/adi-axi-adc.c                      |  482 +++++++++
+ drivers/iio/adc/at91_adc.c                         |    5 +-
+ drivers/iio/adc/fsl-imx25-gcq.c                    |    4 +-
+ drivers/iio/adc/intel_mrfld_adc.c                  |    6 +-
+ drivers/iio/adc/max1241.c                          |  227 +++++
+ drivers/iio/adc/max1363.c                          |   32 +-
+ drivers/iio/adc/sun4i-gpadc-iio.c                  |    4 +-
+ drivers/iio/adc/xilinx-xadc-core.c                 |    4 +-
+ drivers/iio/adc/xilinx-xadc-events.c               |    2 +-
+ drivers/iio/adc/xilinx-xadc.h                      |    2 +-
+ drivers/iio/buffer/industrialio-buffer-dma.c       |    1 -
+ drivers/iio/buffer/industrialio-buffer-dmaengine.c |   41 +-
+ drivers/iio/buffer/industrialio-hw-consumer.c      |   31 -
+ drivers/iio/buffer/industrialio-triggered-buffer.c |   11 -
+ drivers/iio/buffer/kfifo_buf.c                     |   22 -
+ drivers/iio/chemical/atlas-sensor.c                |    7 +-
+ drivers/iio/chemical/bme680_core.c                 |   36 +-
+ drivers/iio/common/st_sensors/st_sensors_core.c    |    6 +-
+ drivers/iio/common/st_sensors/st_sensors_i2c.c     |    4 +-
+ drivers/iio/common/st_sensors/st_sensors_spi.c     |    6 +-
+ drivers/iio/common/st_sensors/st_sensors_trigger.c |   13 +-
+ drivers/iio/gyro/Kconfig                           |    2 +-
+ drivers/iio/gyro/bmg160_i2c.c                      |    6 +-
+ drivers/iio/gyro/bmg160_spi.c                      |    5 +-
+ drivers/iio/gyro/mpu3050-i2c.c                     |    4 +-
+ drivers/iio/gyro/st_gyro_buffer.c                  |    3 +-
+ drivers/iio/gyro/st_gyro_core.c                    |    9 +-
+ drivers/iio/health/max30100.c                      |    7 +-
+ drivers/iio/humidity/hts221_buffer.c               |    6 +-
+ drivers/iio/humidity/hts221_i2c.c                  |    6 +-
+ drivers/iio/humidity/hts221_spi.c                  |    6 +-
+ drivers/iio/imu/adis.c                             |    2 +-
+ drivers/iio/imu/adis16400.c                        |   19 +-
+ drivers/iio/imu/adis16460.c                        |   27 +-
+ drivers/iio/imu/bmi160/bmi160_i2c.c                |    4 +-
+ drivers/iio/imu/bmi160/bmi160_spi.c                |    4 +-
+ drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c         |    8 +-
+ drivers/iio/imu/inv_mpu6050/inv_mpu_core.c         |   23 +-
+ drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c          |    4 +-
+ drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c          |    4 +-
+ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h            |    2 +-
+ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c       |   96 ++
+ drivers/iio/industrialio-buffer.c                  |   18 +-
+ drivers/iio/industrialio-core.c                    |   88 +-
+ drivers/iio/industrialio-trigger.c                 |   53 -
+ drivers/iio/inkern.c                               |   27 -
+ drivers/iio/light/isl29125.c                       |   28 +-
+ drivers/iio/light/ltr501.c                         |    2 +-
+ drivers/iio/light/st_uvis25_i2c.c                  |    4 +-
+ drivers/iio/light/st_uvis25_spi.c                  |    4 +-
+ drivers/iio/light/tsl2563.c                        |    2 +-
+ drivers/iio/light/tsl2772.c                        |    6 +-
+ drivers/iio/light/vcnl4000.c                       |   25 +
+ drivers/iio/magnetometer/ak8974.c                  |    7 +-
+ drivers/iio/magnetometer/bmc150_magn_spi.c         |    4 +-
+ drivers/iio/magnetometer/mmc35240.c                |    4 +-
+ drivers/iio/magnetometer/st_magn_core.c            |    3 +-
+ drivers/iio/pressure/bmp280-core.c                 |   98 +-
+ drivers/iio/pressure/st_pressure_core.c            |    7 +-
+ drivers/iio/proximity/Kconfig                      |   13 +
+ drivers/iio/proximity/Makefile                     |    1 +
+ drivers/iio/proximity/sx9310.c                     | 1069 ++++++++++++++++++++
+ drivers/iio/temperature/ltc2983.c                  |    4 +-
+ drivers/iio/trigger/iio-trig-hrtimer.c             |    2 +-
+ drivers/staging/android/ion/ion_page_pool.c        |    4 +-
+ drivers/staging/axis-fifo/axis-fifo.c              |   12 +-
+ drivers/staging/comedi/comedi_internal.h           |    4 +-
+ drivers/staging/fsl-dpaa2/ethsw/ethsw.c            |    6 +-
+ drivers/staging/gasket/gasket_page_table.c         |    2 +-
+ drivers/staging/gasket/gasket_sysfs.c              |    2 +
+ drivers/staging/gdm724x/gdm_lte.c                  |    2 +-
+ drivers/staging/greybus/hid.c                      |    3 +-
+ drivers/staging/greybus/light.c                    |    3 +-
+ drivers/staging/iio/Documentation/overview.txt     |    2 +-
+ drivers/staging/mt7621-dts/mt7621.dtsi             |    9 +-
+ .../mt7621-pci-phy/mediatek,mt7621-pci-phy.txt     |   28 -
+ .../mt7621-pci-phy/mediatek,mt7621-pci-phy.yaml    |   36 +
+ drivers/staging/mt7621-pci/pci-mt7621.c            |   64 +-
+ drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c    |    2 +-
+ drivers/staging/qlge/qlge_dbg.c                    |    7 +-
+ drivers/staging/qlge/qlge_main.c                   |  181 ++--
+ drivers/staging/rtl8188eu/core/rtw_ap.c            |   99 +-
+ drivers/staging/rtl8188eu/core/rtw_efuse.c         |   33 +-
+ drivers/staging/rtl8188eu/core/rtw_ieee80211.c     |    4 +-
+ drivers/staging/rtl8188eu/core/rtw_led.c           |   17 +-
+ drivers/staging/rtl8188eu/core/rtw_mlme_ext.c      |    6 +-
+ drivers/staging/rtl8188eu/core/rtw_pwrctrl.c       |    2 +-
+ drivers/staging/rtl8188eu/core/rtw_recv.c          |   19 +-
+ drivers/staging/rtl8188eu/hal/fw.c                 |    7 +-
+ drivers/staging/rtl8188eu/hal/odm.c                |   54 +-
+ drivers/staging/rtl8188eu/hal/odm_hwconfig.c       |    2 -
+ drivers/staging/rtl8188eu/hal/phy.c                |    8 +-
+ drivers/staging/rtl8188eu/hal/rf.c                 |    2 +-
+ drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c       |    2 +-
+ drivers/staging/rtl8188eu/hal/rtl8188e_dm.c        |    3 -
+ drivers/staging/rtl8188eu/include/osdep_service.h  |    2 +-
+ drivers/staging/rtl8188eu/include/rtl8188e_spec.h  |    2 +-
+ drivers/staging/rtl8188eu/os_dep/ioctl_linux.c     |  116 +--
+ drivers/staging/rtl8188eu/os_dep/rtw_android.c     |    2 +-
+ drivers/staging/rtl8192e/rtl8192e/rtl_dm.c         |    8 +-
+ drivers/staging/rtl8712/rtl871x_xmit.c             |  158 ++-
+ drivers/staging/rtl8712/rtl871x_xmit.h             |    2 +-
+ drivers/staging/rtl8712/usb_halinit.c              |    2 +-
+ drivers/staging/rtl8723bs/core/rtw_cmd.c           |    2 +-
+ drivers/staging/rtl8723bs/core/rtw_mlme.c          |    6 +-
+ drivers/staging/rtl8723bs/core/rtw_mlme_ext.c      |    7 +-
+ drivers/staging/rtl8723bs/core/rtw_sta_mgt.c       |    2 -
+ drivers/staging/rtl8723bs/core/rtw_wlan_util.c     |   22 +-
+ drivers/staging/rtl8723bs/hal/hal_btcoex.c         |   43 -
+ drivers/staging/rtl8723bs/hal/hal_com_phycfg.c     |    8 +-
+ drivers/staging/rtl8723bs/hal/odm.c                |   13 -
+ drivers/staging/rtl8723bs/hal/odm.h                |    2 +-
+ drivers/staging/rtl8723bs/hal/odm_RegDefine11N.h   |    4 +-
+ drivers/staging/rtl8723bs/hal/sdio_halinit.c       |    4 -
+ drivers/staging/rtl8723bs/include/hal_data.h       |    8 +-
+ drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c  |   11 -
+ drivers/staging/rtl8723bs/os_dep/ioctl_linux.c     |    6 +-
+ drivers/staging/sm750fb/sm750.c                    |    4 +-
+ drivers/staging/sm750fb/sm750.h                    |   23 +-
+ drivers/staging/sm750fb/sm750_hw.c                 |    2 +-
+ drivers/staging/speakup/speakup_decext.c           |    4 +
+ drivers/staging/speakup/speakup_decpc.c            |    4 +
+ drivers/staging/speakup/speakup_dectlk.c           |    5 +-
+ drivers/staging/speakup/speakup_dummy.c            |    4 +
+ drivers/staging/speakup/speakup_soft.c             |    4 +
+ drivers/staging/speakup/spk_types.h                |    3 +-
+ drivers/staging/speakup/spkguide.txt               |    7 +-
+ drivers/staging/speakup/sysfs-driver-speakup       |    6 +
+ drivers/staging/speakup/varhandlers.c              |    1 +
+ drivers/staging/unisys/visorhba/visorhba_main.c    |    2 +-
+ .../vc04_services/bcm2835-audio/bcm2835-pcm.c      |    4 +-
+ .../vc04_services/bcm2835-camera/bcm2835-camera.c  |  382 ++++---
+ .../vc04_services/bcm2835-camera/bcm2835-camera.h  |   62 +-
+ .../vc04_services/bcm2835-camera/controls.c        |   97 +-
+ .../vc04_services/bcm2835-camera/mmal-common.h     |   18 +-
+ .../vc04_services/bcm2835-camera/mmal-parameters.h |   14 +-
+ .../vc04_services/interface/vchiq_arm/vchiq_arm.c  |    4 +-
+ drivers/staging/vt6655/baseband.c                  |  320 +++---
+ drivers/staging/vt6655/baseband.h                  |   37 +-
+ drivers/staging/vt6655/card.c                      |  145 +--
+ drivers/staging/vt6655/card.h                      |    4 -
+ drivers/staging/vt6655/channel.c                   |    4 +-
+ drivers/staging/vt6655/device_main.c               |   36 +-
+ drivers/staging/vt6655/rf.c                        |    4 +-
+ drivers/staging/vt6655/rxtx.c                      |  189 ++--
+ drivers/staging/vt6656/Makefile                    |    3 +-
+ drivers/staging/vt6656/baseband.c                  |  606 +++--------
+ drivers/staging/vt6656/baseband.h                  |   17 +-
+ drivers/staging/vt6656/card.c                      |  493 +++------
+ drivers/staging/vt6656/card.h                      |   20 +-
+ drivers/staging/vt6656/device.h                    |    5 +-
+ drivers/staging/vt6656/firmware.c                  |  106 --
+ drivers/staging/vt6656/firmware.h                  |   25 -
+ drivers/staging/vt6656/mac.c                       |  128 +--
+ drivers/staging/vt6656/mac.h                       |   28 +-
+ drivers/staging/vt6656/main_usb.c                  |  142 ++-
+ drivers/staging/vt6656/power.c                     |   22 +-
+ drivers/staging/vt6656/power.h                     |    2 +-
+ drivers/staging/vt6656/rf.c                        |  361 +++----
+ drivers/staging/vt6656/rf.h                        |    3 +-
+ drivers/staging/vt6656/rxtx.c                      |  213 ++--
+ drivers/staging/vt6656/rxtx.h                      |    7 +
+ drivers/staging/vt6656/wcmd.c                      |    3 +-
+ drivers/staging/wfx/Makefile                       |    1 +
+ drivers/staging/wfx/TODO                           |   40 +-
+ drivers/staging/wfx/bh.c                           |    4 +-
+ drivers/staging/wfx/data_rx.c                      |   12 -
+ drivers/staging/wfx/data_tx.c                      |  267 +++--
+ drivers/staging/wfx/data_tx.h                      |    8 +-
+ drivers/staging/wfx/debug.c                        |   31 +-
+ drivers/staging/wfx/hif_api_cmd.h                  |  625 ++++++------
+ drivers/staging/wfx/hif_api_general.h              |  444 ++++----
+ drivers/staging/wfx/hif_api_mib.h                  |  671 +++++-------
+ drivers/staging/wfx/hif_rx.c                       |  188 ++--
+ drivers/staging/wfx/hif_tx.c                       |   20 +-
+ drivers/staging/wfx/hif_tx.h                       |    3 +-
+ drivers/staging/wfx/hif_tx_mib.c                   |  384 +++++++
+ drivers/staging/wfx/hif_tx_mib.h                   |  434 +-------
+ drivers/staging/wfx/key.c                          |   69 +-
+ drivers/staging/wfx/key.h                          |    2 -
+ drivers/staging/wfx/main.c                         |   14 +-
+ drivers/staging/wfx/queue.c                        |  539 +++-------
+ drivers/staging/wfx/queue.h                        |   39 +-
+ drivers/staging/wfx/scan.c                         |    8 +-
+ drivers/staging/wfx/sta.c                          |  757 +++++---------
+ drivers/staging/wfx/sta.h                          |   35 +-
+ drivers/staging/wfx/traces.h                       |   15 +-
+ drivers/staging/wfx/wfx.h                          |   41 +-
+ include/linux/fpga/adi-axi-common.h                |    6 +-
+ include/linux/iio/adc/ad_sigma_delta.h             |   58 --
+ include/linux/iio/adc/adi-axi-adc.h                |   64 ++
+ include/linux/iio/buffer-dma.h                     |    2 +-
+ include/linux/iio/buffer-dmaengine.h               |    3 +
+ include/linux/iio/buffer_impl.h                    |    9 -
+ include/linux/iio/consumer.h                       |   18 -
+ include/linux/iio/hw-consumer.h                    |    1 -
+ include/linux/iio/iio.h                            |   10 +-
+ include/linux/iio/kfifo_buf.h                      |    1 -
+ include/linux/iio/trigger.h                        |    3 -
+ include/linux/iio/triggered_buffer.h               |    2 -
+ 233 files changed, 7385 insertions(+), 6292 deletions(-)
+ create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-proximity
+ create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9310
+ create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
+ create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+ create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+ delete mode 100644 Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+ create mode 100644 Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
+ create mode 100644 Documentation/devicetree/bindings/iio/common.yaml
+ delete mode 100644 Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
+ create mode 100644 Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
+ create mode 100644 Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
+ delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2563.txt
+ delete mode 100644 Documentation/devicetree/bindings/iio/light/vcnl4000.txt
+ create mode 100644 Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
+ create mode 100644 drivers/iio/adc/ad9467.c
+ create mode 100644 drivers/iio/adc/adi-axi-adc.c
+ create mode 100644 drivers/iio/adc/max1241.c
+ create mode 100644 drivers/iio/proximity/sx9310.c
+ delete mode 100644 drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.txt
+ create mode 100644 drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.yaml
+ delete mode 100644 drivers/staging/vt6656/firmware.c
+ delete mode 100644 drivers/staging/vt6656/firmware.h
+ create mode 100644 drivers/staging/wfx/hif_tx_mib.c
+ create mode 100644 include/linux/iio/adc/adi-axi-adc.h
+Merging mux/for-next (f356d58c3a04 Merge branch 'i2c-mux/for-next' into for-next)
+$ git merge mux/for-next
+Already up to date!
+Merge made by the 'recursive' strategy.
+Merging icc/icc-next (8f3d9f354286 Linux 5.7-rc1)
+$ git merge icc/icc-next
+Already up to date.
+Merging slave-dma/next (5332f8b1d9dd dmaengine: dmatest: Describe members of struct dmatest_info)
+$ git merge slave-dma/next
+Auto-merging drivers/dma/ti/k3-udma.c
+Auto-merging drivers/dma/mmp_tdma.c
+Auto-merging drivers/dma/dmatest.c
+Auto-merging drivers/dma/Kconfig
+Removing Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
+Removing Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+Merge made by the 'recursive' strategy.
+ Documentation/ABI/stable/sysfs-driver-dma-idxd     |   6 +
+ .../devicetree/bindings/dma/renesas,rcar-dmac.txt  | 117 ----------------
+ .../devicetree/bindings/dma/renesas,rcar-dmac.yaml | 150 +++++++++++++++++++++
+ .../devicetree/bindings/dma/renesas,usb-dmac.txt   |  55 --------
+ .../devicetree/bindings/dma/renesas,usb-dmac.yaml  | 102 ++++++++++++++
+ .../devicetree/bindings/dma/st,stm32-dma.yaml      |   5 +
+ drivers/dma/Kconfig                                |   4 +-
+ drivers/dma/dmatest.c                              |  24 ++--
+ drivers/dma/dw-edma/dw-edma-core.c                 |  38 ++++--
+ drivers/dma/dw-edma/dw-edma-core.h                 |   4 +
+ drivers/dma/dw-edma/dw-edma-pcie.c                 |  10 ++
+ drivers/dma/idxd/sysfs.c                           |  11 ++
+ drivers/dma/ioat/dma.c                             |  85 +++++++-----
+ drivers/dma/ioat/dma.h                             |  10 +-
+ drivers/dma/ioat/init.c                            |   2 +-
+ drivers/dma/mmp_tdma.c                             |  26 +++-
+ drivers/dma/qcom/hidma.c                           |   1 -
+ drivers/dma/stm32-dma.c                            |  41 ++++--
+ drivers/dma/ti/Kconfig                             |   4 +-
+ drivers/dma/ti/k3-udma.c                           |   2 +-
+ 20 files changed, 442 insertions(+), 255 deletions(-)
+ delete mode 100644 Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+ create mode 100644 Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
+ delete mode 100644 Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
+ create mode 100644 Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
+Merging cgroup/for-next (eec8fd0277e3 device_cgroup: Cleanup cgroup eBPF device filter code)
+$ git merge cgroup/for-next
+Auto-merging drivers/gpu/drm/amd/amdkfd/kfd_priv.h
+Merge made by the 'recursive' strategy.
+ drivers/gpu/drm/amd/amdkfd/kfd_priv.h |  2 +-
+ fs/xattr.c                            |  6 +++---
+ include/linux/device_cgroup.h         | 14 +++++---------
+ kernel/cgroup/rstat.c                 | 16 +++-------------
+ security/Makefile                     |  2 +-
+ security/device_cgroup.c              | 19 ++++++++++++++++---
+ 6 files changed, 29 insertions(+), 30 deletions(-)
+Merging scsi/for-next (78fb6bd02578 Merge branch 'misc' into for-next)
+$ git merge scsi/for-next
+Auto-merging drivers/scsi/ufs/ufshcd.c
+Auto-merging drivers/net/ethernet/qlogic/qed/qed_main.c
+Merge made by the 'recursive' strategy.
+ drivers/message/fusion/mptbase.c            |   8 +-
+ drivers/net/ethernet/qlogic/qed/qed.h       |   1 +
+ drivers/net/ethernet/qlogic/qed/qed_main.c  |   9 ++
+ drivers/scsi/bfa/bfa_core.c                 |   2 +-
+ drivers/scsi/bfa/bfa_fcpim.c                |   4 +-
+ drivers/scsi/bfa/bfa_fcs_lport.c            |   2 +-
+ drivers/scsi/bfa/bfa_ioc_ct.c               |   4 +-
+ drivers/scsi/bfa/bfa_svc.c                  |   4 +-
+ drivers/scsi/bfa/bfad.c                     |   2 +-
+ drivers/scsi/bfa/bfad_attr.c                |   4 +-
+ drivers/scsi/fcoe/fcoe.c                    |   4 +-
+ drivers/scsi/fnic/fnic_main.c               |   4 +-
+ drivers/scsi/fnic/vnic_dev.c                |  12 +--
+ drivers/scsi/fnic/vnic_wq.c                 |   4 +-
+ drivers/scsi/gdth.c                         |   4 +-
+ drivers/scsi/ipr.c                          |   2 +-
+ drivers/scsi/libsas/sas_ata.c               |   1 +
+ drivers/scsi/lpfc/lpfc_els.c                |  10 +--
+ drivers/scsi/lpfc/lpfc_nvme.c               |   5 --
+ drivers/scsi/lpfc/lpfc_nvmet.c              |  11 ---
+ drivers/scsi/megaraid/megaraid_mbox.c       |   6 +-
+ drivers/scsi/megaraid/megaraid_sas_base.c   |   4 +-
+ drivers/scsi/megaraid/megaraid_sas_fp.c     |  12 +--
+ drivers/scsi/megaraid/megaraid_sas_fusion.c |   6 +-
+ drivers/scsi/mpt3sas/mpt3sas_base.c         |   4 +-
+ drivers/scsi/mvsas/mv_init.c                |   6 +-
+ drivers/scsi/qedf/qedf.h                    |   6 +-
+ drivers/scsi/qedf/qedf_els.c                |  10 +--
+ drivers/scsi/qedf/qedf_io.c                 |  48 +++++++---
+ drivers/scsi/qedf/qedf_main.c               | 135 +++++++++++++++++++++++++++-
+ drivers/scsi/qedi/qedi_iscsi.c              |  17 ++--
+ drivers/scsi/qedi/qedi_main.c               |  13 +--
+ drivers/scsi/qla1280.c                      |   4 +-
+ drivers/scsi/qla2xxx/qla_dbg.c              |  36 ++++----
+ drivers/scsi/qla2xxx/qla_init.c             |  92 ++++++++++---------
+ drivers/scsi/st.c                           |   5 +-
+ drivers/scsi/ufs/ufs-qcom.c                 |   3 +-
+ drivers/scsi/ufs/ufshcd.c                   |   8 +-
+ include/linux/qed/qed_if.h                  |   1 +
+ 39 files changed, 337 insertions(+), 176 deletions(-)
+Merging scsi-mkp/for-next (6f41f08c88c5 scsi: dpt_i2o: Remove always false 'chan < 0' statement)
+$ git merge scsi-mkp/for-next
+Auto-merging drivers/scsi/ufs/ufshcd.c
+Auto-merging drivers/scsi/scsi_lib.c
+Auto-merging drivers/scsi/qla2xxx/qla_os.c
+Auto-merging drivers/scsi/qla2xxx/qla_isr.c
+Auto-merging drivers/scsi/qla2xxx/qla_init.c
+Auto-merging drivers/scsi/qla2xxx/qla_attr.c
+Merge made by the 'recursive' strategy.
+ drivers/scsi/BusLogic.c                     |   2 +-
+ drivers/scsi/aacraid/linit.c                |  12 +-
+ drivers/scsi/aic7xxx/aic79xx_core.c         |  18 +-
+ drivers/scsi/aic7xxx/aic7xxx_core.c         |  19 +-
+ drivers/scsi/bfa/bfa_fcs_lport.c            |   2 +-
+ drivers/scsi/bfa/bfa_fcs_rport.c            |   4 +-
+ drivers/scsi/bfa/bfa_svc.c                  |   3 -
+ drivers/scsi/bnx2fc/bnx2fc_fcoe.c           |   4 +-
+ drivers/scsi/bnx2fc/bnx2fc_io.c             |   1 +
+ drivers/scsi/cxgbi/cxgb4i/cxgb4i.c          |   7 +-
+ drivers/scsi/dpt_i2o.c                      |   2 +-
+ drivers/scsi/ipr.c                          |   3 +-
+ drivers/scsi/isci/isci.h                    |   6 +-
+ drivers/scsi/megaraid/megaraid_sas_fusion.c |  10 +-
+ drivers/scsi/mpt3sas/mpt3sas_base.c         | 259 ++++++++++++++++------------
+ drivers/scsi/mpt3sas/mpt3sas_base.h         |   9 +-
+ drivers/scsi/pmcraid.c                      |   4 +-
+ drivers/scsi/qedi/qedi_iscsi.c              |   4 +
+ drivers/scsi/qla2xxx/qla_attr.c             |  30 +++-
+ drivers/scsi/qla2xxx/qla_def.h              |  13 +-
+ drivers/scsi/qla2xxx/qla_gbl.h              |   3 +
+ drivers/scsi/qla2xxx/qla_init.c             |   2 +
+ drivers/scsi/qla2xxx/qla_isr.c              |  54 ++++--
+ drivers/scsi/qla2xxx/qla_os.c               |   6 +
+ drivers/scsi/qla2xxx/qla_tmpl.c             | 121 ++++++++++---
+ drivers/scsi/qla4xxx/ql4_os.c               |   2 +-
+ drivers/scsi/scsi_lib.c                     | 203 ++++++++++------------
+ drivers/scsi/sgiwd93.c                      |   2 +-
+ drivers/scsi/snic/snic.h                    |   2 +-
+ drivers/scsi/snic/snic_ctl.c                |   5 +-
+ drivers/scsi/sr.c                           |  26 ++-
+ drivers/scsi/ufs/ufs-qcom.c                 |   1 +
+ drivers/scsi/ufs/ufs-sysfs.c                |  39 ++++-
+ drivers/scsi/ufs/ufs.h                      |  36 +++-
+ drivers/scsi/ufs/ufshcd.c                   | 254 ++++++++++++++++++++++++++-
+ drivers/scsi/ufs/ufshcd.h                   |  14 ++
+ drivers/target/iscsi/iscsi_target_util.c    |  30 +---
+ include/target/iscsi/iscsi_target_core.h    |  10 --
+ 38 files changed, 833 insertions(+), 389 deletions(-)
+Merging vhost/linux-next (4ce332bb5eb3 vhost: revert "vhost: disable for OABI")
+$ git merge vhost/linux-next
+Auto-merging drivers/net/caif/Kconfig
+Merge made by the 'recursive' strategy.
+ drivers/misc/mic/Kconfig           |  2 +-
+ drivers/net/caif/Kconfig           |  2 +-
+ drivers/vdpa/Kconfig               |  2 +-
+ drivers/vhost/Kconfig              | 17 ++++----------
+ drivers/vhost/vhost.c              |  8 +++----
+ drivers/vhost/vhost.h              |  6 ++---
+ drivers/vhost/vringh.c             |  6 ++---
+ drivers/virtio/virtio_mmio.c       |  4 +---
+ drivers/virtio/virtio_pci_modern.c |  1 +
+ include/linux/vringh.h             |  6 ++---
+ include/uapi/linux/virtio_ring.h   | 48 ++++++++++++++++++++++++++++++--------
+ 11 files changed, 60 insertions(+), 42 deletions(-)
+Merging rpmsg/for-next (a830779bcd3b Merge branches 'hwspinlock-next', 'rpmsg-next' and 'rproc-next' into for-next)
+$ git merge rpmsg/for-next
+Auto-merging include/linux/remoteproc.h
+Auto-merging drivers/soc/qcom/Kconfig
+Auto-merging drivers/remoteproc/stm32_rproc.c
+Merge made by the 'recursive' strategy.
+ drivers/remoteproc/qcom_common.c                   |  17 +-
+ drivers/remoteproc/qcom_common.h                   |   5 +-
+ drivers/remoteproc/qcom_q6v5_adsp.c                |   3 +-
+ drivers/remoteproc/qcom_q6v5_mss.c                 |   5 +-
+ drivers/remoteproc/qcom_q6v5_pas.c                 |   3 +-
+ drivers/remoteproc/qcom_sysmon.c                   | 116 +++++++++--
+ drivers/remoteproc/qcom_wcnss.c                    |   1 +
+ drivers/remoteproc/remoteproc_core.c               | 219 ++++++++++++++++-----
+ drivers/remoteproc/remoteproc_debugfs.c            |  28 +--
+ drivers/remoteproc/remoteproc_elf_loader.c         |  24 ---
+ drivers/remoteproc/remoteproc_internal.h           |  17 +-
+ drivers/remoteproc/remoteproc_virtio.c             |   3 +-
+ drivers/remoteproc/st_remoteproc.c                 |   2 +-
+ drivers/remoteproc/st_slim_rproc.c                 |   2 +-
+ drivers/remoteproc/stm32_rproc.c                   |   3 +-
+ drivers/rpmsg/Kconfig                              |   6 +-
+ drivers/rpmsg/Makefile                             |   3 +-
+ .../qcom/glink_ssr.c => rpmsg/qcom_glink_ssr.c}    |  28 ++-
+ drivers/rpmsg/rpmsg_core.c                         |   2 +-
+ drivers/soc/qcom/Kconfig                           |   9 -
+ drivers/soc/qcom/Makefile                          |   1 -
+ include/linux/remoteproc.h                         |  13 +-
+ include/linux/rpmsg/qcom_glink.h                   |   3 +-
+ 23 files changed, 363 insertions(+), 150 deletions(-)
+ rename drivers/{soc/qcom/glink_ssr.c => rpmsg/qcom_glink_ssr.c} (83%)
+Merging gpio/for-next (9e581cd14663 Merge branch 'devel' into for-next)
+$ git merge gpio/for-next
+Auto-merging MAINTAINERS
+Removing Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/gpio/snps,dw-apb-gpio.yaml | 134 +++++++++++++
+ .../devicetree/bindings/gpio/snps-dwapb-gpio.txt   |  65 ------
+ MAINTAINERS                                        |   1 +
+ drivers/gpio/gpio-dwapb.c                          | 219 +++++++++------------
+ drivers/gpio/gpio-ftgpio010.c                      |   2 +-
+ drivers/gpio/gpio-mlxbf2.c                         |   5 +-
+ drivers/gpio/gpio-mm-lantiq.c                      |   2 +-
+ drivers/gpio/gpio-pca953x.c                        |   2 +-
+ drivers/gpio/gpio-tegra.c                          |   1 +
+ drivers/gpio/gpiolib-acpi.c                        |   6 +-
+ drivers/gpio/gpiolib.c                             |  58 ++++--
+ drivers/gpio/gpiolib.h                             |  27 ++-
+ 12 files changed, 290 insertions(+), 232 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
+ delete mode 100644 Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+Merging gpio-brgl/gpio/for-next (6fdeb6cbe1ef gpio: pca953x: drop unused parameters of pca953x_recalc_addr())
+$ git merge gpio-brgl/gpio/for-next
+Auto-merging drivers/gpio/gpiolib-of.c
+Auto-merging drivers/gpio/gpio-pca953x.c
+Merge made by the 'recursive' strategy.
+ drivers/gpio/Kconfig           |  2 +-
+ drivers/gpio/TODO              |  4 ++
+ drivers/gpio/gpio-pca953x.c    | 94 ++++++++++++++++++++++++++----------------
+ drivers/gpio/gpio-pl061.c      |  9 ++--
+ drivers/gpio/gpio-xgene-sb.c   |  2 +-
+ drivers/gpio/gpiolib-devprop.c |  5 ++-
+ drivers/gpio/gpiolib-of.c      | 10 +++++
+ 7 files changed, 82 insertions(+), 44 deletions(-)
+Merging gpio-intel/for-next (7e73aa90a38c gpio: merrifield: Better show how GPIO and IRQ bases are derived from hardware)
+$ git merge gpio-intel/for-next
+Merge made by the 'recursive' strategy.
+ drivers/gpio/gpio-ich.c        |  2 +-
+ drivers/gpio/gpio-merrifield.c | 10 ++++--
+ drivers/gpio/gpio-pch.c        | 73 +++++++++++++++++++++---------------------
+ 3 files changed, 45 insertions(+), 40 deletions(-)
+Merging pinctrl/for-next (9e692aa8d3f8 Merge branch 'devel' into for-next)
+$ git merge pinctrl/for-next
+Removing include/linux/spi/mcp23s08.h
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/arm/freescale/fsl,scu.txt  |    6 +-
+ .../bindings/pinctrl/qcom,sm8250-pinctrl.yaml      |  147 +++
+ drivers/pinctrl/Kconfig                            |   13 +-
+ drivers/pinctrl/Makefile                           |    2 +
+ drivers/pinctrl/actions/pinctrl-s700.c             |    2 +-
+ drivers/pinctrl/freescale/Kconfig                  |    7 +
+ drivers/pinctrl/freescale/Makefile                 |    1 +
+ drivers/pinctrl/freescale/pinctrl-imx1-core.c      |    2 +-
+ drivers/pinctrl/freescale/pinctrl-imx8dxl.c        |  193 +++
+ drivers/pinctrl/mediatek/Kconfig                   |   13 +-
+ drivers/pinctrl/mediatek/Makefile                  |    5 +-
+ drivers/pinctrl/mediatek/mtk-eint.c                |    9 +
+ drivers/pinctrl/mediatek/pinctrl-mt6765.c          |    4 +
+ drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c   |   24 +
+ drivers/pinctrl/mediatek/pinctrl-paris.c           |    8 +-
+ drivers/pinctrl/meson/pinctrl-meson.c              |   14 +
+ drivers/pinctrl/nomadik/pinctrl-ab8505.c           |    1 +
+ drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c   |    6 +-
+ drivers/pinctrl/nomadik/pinctrl-nomadik.c          |    4 +-
+ drivers/pinctrl/pinctrl-bm1880.c                   |    1 +
+ drivers/pinctrl/pinctrl-lantiq.c                   |    2 +-
+ drivers/pinctrl/pinctrl-mcp23s08.c                 |  514 +-------
+ drivers/pinctrl/pinctrl-mcp23s08.h                 |   52 +
+ drivers/pinctrl/pinctrl-mcp23s08_i2c.c             |  124 ++
+ drivers/pinctrl/pinctrl-mcp23s08_spi.c             |  262 ++++
+ drivers/pinctrl/pinctrl-stmfx.c                    |    6 +-
+ drivers/pinctrl/pinctrl-sx150x.c                   |    2 +-
+ drivers/pinctrl/qcom/Kconfig                       |    9 +
+ drivers/pinctrl/qcom/Makefile                      |    1 +
+ drivers/pinctrl/qcom/pinctrl-msm.c                 |    3 +-
+ drivers/pinctrl/qcom/pinctrl-sm8250.c              | 1361 ++++++++++++++++++++
+ drivers/pinctrl/sh-pfc/pfc-sh7269.c                |    5 +-
+ drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c        |    7 +-
+ drivers/pinctrl/tegra/pinctrl-tegra-xusb.c         |    2 +-
+ drivers/pinctrl/zte/pinctrl-zx.c                   |    2 +-
+ include/dt-bindings/pinctrl/pads-imx8dxl.h         |  639 +++++++++
+ include/linux/spi/mcp23s08.h                       |   18 -
+ 37 files changed, 2925 insertions(+), 546 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+ create mode 100644 drivers/pinctrl/freescale/pinctrl-imx8dxl.c
+ create mode 100644 drivers/pinctrl/pinctrl-mcp23s08.h
+ create mode 100644 drivers/pinctrl/pinctrl-mcp23s08_i2c.c
+ create mode 100644 drivers/pinctrl/pinctrl-mcp23s08_spi.c
+ create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250.c
+ create mode 100644 include/dt-bindings/pinctrl/pads-imx8dxl.h
+ delete mode 100644 include/linux/spi/mcp23s08.h
+Merging pinctrl-intel/for-next (6d649fca3491 pinctrl: intel: Move npins closer to pin_base in struct intel_community)
+$ git merge pinctrl-intel/for-next
+Auto-merging drivers/pinctrl/intel/pinctrl-cherryview.c
+Merge made by the 'recursive' strategy.
+ drivers/pinctrl/intel/Kconfig              |   8 +
+ drivers/pinctrl/intel/Makefile             |   1 +
+ drivers/pinctrl/intel/pinctrl-baytrail.c   |   9 +-
+ drivers/pinctrl/intel/pinctrl-cannonlake.c |  58 +++--
+ drivers/pinctrl/intel/pinctrl-cherryview.c | 278 +++++++++--------------
+ drivers/pinctrl/intel/pinctrl-icelake.c    |  30 ++-
+ drivers/pinctrl/intel/pinctrl-intel.c      |  22 +-
+ drivers/pinctrl/intel/pinctrl-intel.h      |  27 ++-
+ drivers/pinctrl/intel/pinctrl-jasperlake.c | 344 +++++++++++++++++++++++++++++
+ drivers/pinctrl/intel/pinctrl-lynxpoint.c  |  10 +-
+ drivers/pinctrl/intel/pinctrl-tigerlake.c  |  32 ++-
+ 11 files changed, 560 insertions(+), 259 deletions(-)
+ create mode 100644 drivers/pinctrl/intel/pinctrl-jasperlake.c
+Merging pinctrl-samsung/for-next (f354157a7d18 pinctrl: samsung: Save/restore eint_mask over suspend for EINT_TYPE GPIOs)
+$ git merge pinctrl-samsung/for-next
+Merge made by the 'recursive' strategy.
+ drivers/pinctrl/samsung/pinctrl-exynos.c | 82 ++++++++++++++++++++++----------
+ 1 file changed, 58 insertions(+), 24 deletions(-)
+Merging pwm/for-next (6f0841a8197b pwm: Add support for Azoteq IQS620A PWM generator)
+$ git merge pwm/for-next
+Merge made by the 'recursive' strategy.
+ .../devicetree/bindings/pwm/renesas,pwm-rcar.yaml  |   1 +
+ drivers/pwm/Kconfig                                |  10 +
+ drivers/pwm/Makefile                               |   1 +
+ drivers/pwm/core.c                                 |   2 +-
+ drivers/pwm/pwm-iqs620a.c                          | 270 +++++++++++++++++++++
+ 5 files changed, 283 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/pwm/pwm-iqs620a.c
+Merging userns/for-next (507122805edd proc: Ensure we see the exit of each process tid exactly)
+$ git merge userns/for-next
+Auto-merging include/linux/rculist.h
+Auto-merging include/linux/pid.h
+Auto-merging fs/proc/base.c
+Auto-merging Documentation/filesystems/proc.rst
+Merge made by the 'recursive' strategy.
+ Documentation/filesystems/proc.rst                 |  92 ++++++++++++---
+ fs/exec.c                                          |   5 +-
+ fs/locks.c                                         |   4 +-
+ fs/proc/base.c                                     |  64 +++++-----
+ fs/proc/generic.c                                  |   9 ++
+ fs/proc/inode.c                                    |  30 ++++-
+ fs/proc/root.c                                     | 131 ++++++++++++++++-----
+ fs/proc/self.c                                     |   6 +-
+ fs/proc/thread_self.c                              |   6 +-
+ fs/proc_namespace.c                                |  14 +--
+ include/linux/pid.h                                |   1 +
+ include/linux/pid_namespace.h                      |  12 --
+ include/linux/proc_fs.h                            |  30 ++++-
+ include/linux/rculist.h                            |  21 ++++
+ kernel/pid.c                                       |  19 +++
+ security/tomoyo/realpath.c                         |   4 +-
+ tools/testing/selftests/proc/.gitignore            |   2 +
+ tools/testing/selftests/proc/Makefile              |   2 +
+ .../testing/selftests/proc/proc-fsconfig-hidepid.c |  50 ++++++++
+ .../testing/selftests/proc/proc-multiple-procfs.c  |  48 ++++++++
+ 20 files changed, 433 insertions(+), 117 deletions(-)
+ create mode 100644 tools/testing/selftests/proc/proc-fsconfig-hidepid.c
+ create mode 100644 tools/testing/selftests/proc/proc-multiple-procfs.c
+Merging ktest/for-next (1091c8fce8aa ktest: Fix typos in ktest.pl)
+$ git merge ktest/for-next
+Already up to date.
+Merging random/dev (ab9a7e27044b random: avoid warnings for !CONFIG_NUMA builds)
+$ git merge random/dev
+Already up to date.
+Merging kselftest/next (f0c0d0cf590f selftests/ftrace: Check the first record for kprobe_args_type.tc)
+$ git merge kselftest/next
+Merge made by the 'recursive' strategy.
+ .../ftrace/test.d/ftrace/fgraph-filter-stack.tc    |   5 +-
+ .../ftrace/test.d/ftrace/fgraph-filter.tc          |   2 +
+ .../ftrace/test.d/ftrace/func-filter-glob.tc       |   2 +
+ .../test.d/ftrace/func-filter-notrace-pid.tc       |   5 +-
+ .../ftrace/test.d/ftrace/func-filter-pid.tc        |   5 +-
+ .../ftrace/test.d/ftrace/func-filter-stacktrace.tc |   2 +-
+ .../ftrace/test.d/ftrace/func_event_triggers.tc    |   5 +-
+ .../ftrace/test.d/ftrace/func_mod_trace.tc         |   2 +-
+ .../ftrace/test.d/ftrace/func_profiler.tc          |   5 +-
+ .../ftrace/test.d/ftrace/func_set_ftrace_file.tc   |   5 +-
+ .../ftrace/test.d/ftrace/func_stack_tracer.tc      |   2 +
+ .../test.d/ftrace/func_traceonoff_triggers.tc      |   5 +-
+ tools/testing/selftests/ftrace/test.d/functions    |   6 +
+ .../ftrace/test.d/kprobe/kprobe_args_type.tc       |   2 +-
+ .../ftrace/test.d/kprobe/kprobe_ftrace.tc          |   2 +
+ tools/testing/selftests/gpio/Makefile              |  12 +-
+ tools/testing/selftests/intel_pstate/Makefile      |   2 +-
+ tools/testing/selftests/kselftest_deps.sh          | 272 +++++++++++++++++++++
+ tools/testing/selftests/memfd/Makefile             |  14 +-
+ 19 files changed, 315 insertions(+), 40 deletions(-)
+ create mode 100755 tools/testing/selftests/kselftest_deps.sh
+Merging y2038/y2038 (c4e71212a245 Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC")
+$ git merge y2038/y2038
+Already up to date.
+Merging livepatching/for-next (d28b4c1b2b3d Merge branch 'for-5.6/selftests' into for-next)
+$ git merge livepatching/for-next
+Already up to date!
+Merge made by the 'recursive' strategy.
+Merging coresight/next (d474fcf1eb18 coresight: Avoid casting void pointers)
+$ git merge coresight/next
+Merge made by the 'recursive' strategy.
+ Documentation/trace/coresight/coresight-ect.rst    |   6 +-
+ Documentation/trace/coresight/coresight.rst        |  85 +++++++++
+ drivers/hwtracing/coresight/Makefile               |   3 +-
+ .../hwtracing/coresight/coresight-cti-platform.c   |  10 +-
+ drivers/hwtracing/coresight/coresight-cti-sysfs.c  |  16 +-
+ drivers/hwtracing/coresight/coresight-cti.c        |  71 ++++++-
+ drivers/hwtracing/coresight/coresight-cti.h        |   8 +-
+ drivers/hwtracing/coresight/coresight-etb10.c      |   2 +-
+ drivers/hwtracing/coresight/coresight-etm3x.c      |   2 +-
+ .../hwtracing/coresight/coresight-etm4x-sysfs.c    |   2 +-
+ drivers/hwtracing/coresight/coresight-etm4x.c      |  32 ++--
+ drivers/hwtracing/coresight/coresight-platform.c   |  91 ++++++---
+ drivers/hwtracing/coresight/coresight-priv.h       |  21 ++-
+ drivers/hwtracing/coresight/coresight-sysfs.c      | 204 +++++++++++++++++++++
+ drivers/hwtracing/coresight/coresight-tmc-etf.c    |  16 +-
+ drivers/hwtracing/coresight/coresight-tmc.c        |   2 +-
+ drivers/hwtracing/coresight/coresight.c            |  82 ++++++---
+ include/linux/coresight.h                          |  32 +++-
+ 18 files changed, 574 insertions(+), 111 deletions(-)
+ create mode 100644 drivers/hwtracing/coresight/coresight-sysfs.c
+Merging rtc/rtc-next (11ddbdfb68e4 rtc: rc5t619: Fix an ERR_PTR vs NULL check)
+$ git merge rtc/rtc-next
+Merge made by the 'recursive' strategy.
+ drivers/rtc/rtc-fsl-ftm-alarm.c | 4 +---
+ drivers/rtc/rtc-lpc24xx.c       | 4 +---
+ drivers/rtc/rtc-mt2712.c        | 4 +---
+ drivers/rtc/rtc-rc5t619.c       | 4 +---
+ 4 files changed, 4 insertions(+), 12 deletions(-)
+Merging nvdimm/libnvdimm-for-next (f6d2b802f80d Merge branch 'for-5.7/libnvdimm' into libnvdimm-for-next)
+$ git merge nvdimm/libnvdimm-for-next
+Already up to date.
+Merging at24/at24/for-next (8f3d9f354286 Linux 5.7-rc1)
+$ git merge at24/at24/for-next
+Already up to date.
+Merging ntb/ntb-next (1b3fb49ac27b NTB: ntb_test: Fix bug when counting remote files)
+$ git merge ntb/ntb-next
+Merge made by the 'recursive' strategy.
+ drivers/ntb/core.c                      |   9 +-
+ drivers/ntb/hw/amd/ntb_hw_amd.c         |   4 -
+ drivers/ntb/hw/idt/ntb_hw_idt.c         |   6 -
+ drivers/ntb/hw/intel/Makefile           |   2 +-
+ drivers/ntb/hw/intel/ntb_hw_gen1.c      |  49 ++--
+ drivers/ntb/hw/intel/ntb_hw_gen3.c      |  13 +-
+ drivers/ntb/hw/intel/ntb_hw_gen3.h      |   8 +
+ drivers/ntb/hw/intel/ntb_hw_gen4.c      | 500 ++++++++++++++++++++++++++++++++
+ drivers/ntb/hw/intel/ntb_hw_gen4.h      |  87 ++++++
+ drivers/ntb/hw/intel/ntb_hw_intel.h     |  12 +
+ drivers/ntb/test/ntb_perf.c             |  33 ++-
+ drivers/ntb/test/ntb_pingpong.c         |  14 +-
+ drivers/ntb/test/ntb_tool.c             |   9 +-
+ include/linux/ntb.h                     |   2 +-
+ tools/testing/selftests/ntb/ntb_test.sh |   2 +-
+ 15 files changed, 678 insertions(+), 72 deletions(-)
+ create mode 100644 drivers/ntb/hw/intel/ntb_hw_gen4.c
+ create mode 100644 drivers/ntb/hw/intel/ntb_hw_gen4.h
+Merging kspp/for-next/kspp (c7527373fe28 gcc-common.h: Update for GCC 10)
+$ git merge kspp/for-next/kspp
+Merge made by the 'recursive' strategy.
+ scripts/gcc-plugins/Makefile           | 1 +
+ scripts/gcc-plugins/gcc-common.h       | 4 ++++
+ scripts/gcc-plugins/stackleak_plugin.c | 5 ++---
+ 3 files changed, 7 insertions(+), 3 deletions(-)
+Merging cisco/for-next (9e98c678c2d6 Linux 5.1-rc1)
+$ git merge cisco/for-next
+Already up to date.
+Merging gnss/gnss-next (ae83d0b416db Linux 5.7-rc2)
+$ git merge gnss/gnss-next
+Already up to date.
+Merging fsi/next (2c01397b71c5 fsi: aspeed: Fix OPB0 byte order register values)
+$ git merge fsi/next
+Auto-merging drivers/fsi/Kconfig
+CONFLICT (content): Merge conflict in drivers/fsi/Kconfig
+Resolved 'drivers/fsi/Kconfig' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit --no-edit -v -a
+[master dc6f97e8624e] Merge remote-tracking branch 'fsi/next'
+$ git diff -M --stat --summary HEAD^..
+Merging slimbus/for-next (b23f2e2df6c9 slimbus: ngd: remove redundant assignment)
+$ git merge slimbus/for-next
+Merge made by the 'recursive' strategy.
+ drivers/slimbus/core.c          | 6 +++---
+ drivers/slimbus/qcom-ngd-ctrl.c | 5 ++---
+ 2 files changed, 5 insertions(+), 6 deletions(-)
+Merging nvmem/for-next (da50b72c0822 nvmem: ensure sysfs writes handle write-protect pin)
+$ git merge nvmem/for-next
+Merge made by the 'recursive' strategy.
+ drivers/nvmem/core.c      | 104 ++++++++++++++++++----------------------------
+ drivers/nvmem/imx-ocotp.c |   9 +---
+ 2 files changed, 42 insertions(+), 71 deletions(-)
+Merging xarray/xarray (27586ca786a7 XArray: Handle retry entries within xas_find_marked)
+$ git merge xarray/xarray
+Merge made by the 'recursive' strategy.
+ Documentation/core-api/xarray.rst   | 13 +++++++------
+ drivers/infiniband/core/device.c    |  6 +-----
+ include/linux/xarray.h              | 23 +++++++++++++++++++++-
+ lib/idr.c                           |  1 +
+ lib/test_xarray.c                   | 20 +++++++++++++++++++
+ lib/xarray.c                        | 39 +++++++++++++++++++++++++++++++------
+ tools/testing/radix-tree/idr-test.c | 29 +++++++++++++++++++++++++++
+ 7 files changed, 113 insertions(+), 18 deletions(-)
+Merging hyperv/hyperv-next (df474842683c hyper-v: Switch to use UUID types directly)
+$ git merge hyperv/hyperv-next
+Auto-merging include/linux/mod_devicetable.h
+Auto-merging include/linux/hyperv.h
+Auto-merging drivers/hv/vmbus_drv.c
+Auto-merging drivers/hv/hv_trace.h
+Auto-merging drivers/hv/hv.c
+Auto-merging arch/x86/kvm/hyperv.c
+Auto-merging arch/x86/include/asm/kvm_host.h
+Auto-merging MAINTAINERS
+Merge made by the 'recursive' strategy.
+ MAINTAINERS                         |   1 +
+ arch/x86/include/asm/hyperv-tlfs.h  | 472 +++-------------------------------
+ arch/x86/include/asm/kvm_host.h     |   2 +-
+ arch/x86/kvm/hyperv.c               |   4 +-
+ drivers/hv/channel.c                |  58 +++--
+ drivers/hv/channel_mgmt.c           | 411 ++++++++++++++++--------------
+ drivers/hv/connection.c             |  58 +----
+ drivers/hv/hv.c                     |  16 +-
+ drivers/hv/hv_fcopy.c               |   2 +-
+ drivers/hv/hv_snapshot.c            |   2 +-
+ drivers/hv/hv_trace.h               |  25 +-
+ drivers/hv/hyperv_vmbus.h           |  33 ++-
+ drivers/hv/vmbus_drv.c              | 306 +++++++++++++++++-----
+ drivers/net/hyperv/netvsc.c         |   7 +-
+ drivers/pci/controller/pci-hyperv.c |  44 ++--
+ drivers/scsi/storvsc_drv.c          |  95 ++++++-
+ include/asm-generic/hyperv-tlfs.h   | 493 ++++++++++++++++++++++++++++++++++++
+ include/linux/hyperv.h              |  53 ++--
+ include/linux/mod_devicetable.h     |   2 +-
+ 19 files changed, 1228 insertions(+), 856 deletions(-)
+ create mode 100644 include/asm-generic/hyperv-tlfs.h
+Merging auxdisplay/auxdisplay (2f920c0f0e29 auxdisplay: charlcd: replace zero-length array with flexible-array member)
+$ git merge auxdisplay/auxdisplay
+Already up to date.
+Merging kgdb/kgdb/for-next (5ea771abd5a3 kdb: Censor attempts to set PROMPT without ENABLE_MEM_READ)
+$ git merge kgdb/kgdb/for-next
+Merge made by the 'recursive' strategy.
+Merging pidfd/for-next (6952a4f64644 selftests: add pid namespace ENOMEM regression test)
+$ git merge pidfd/for-next
+Already up to date.
+Merging devfreq/devfreq-next (a35a2f2b3e6e PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe())
+$ git merge devfreq/devfreq-next
+Merge made by the 'recursive' strategy.
+ drivers/devfreq/tegra30-devfreq.c | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+Merging hmm/hmm (8f3d9f354286 Linux 5.7-rc1)
+$ git merge hmm/hmm
+Already up to date.
+Merging fpga/for-next (a2b9d4eadb77 fpga: dfl: afu: support debug access to memory-mapped afu regions)
+$ git merge fpga/for-next
+Auto-merging drivers/fpga/dfl.h
+Merge made by the 'recursive' strategy.
+ .../bindings/firmware/intel,stratix10-svc.txt      |  2 +-
+ .../bindings/fpga/intel-stratix10-soc-fpga-mgr.txt |  3 +-
+ arch/arm64/boot/dts/intel/socfpga_agilex.dtsi      |  4 +--
+ drivers/fpga/dfl-afu-main.c                        | 35 +++++++++++++++-------
+ drivers/fpga/dfl-fme-main.c                        | 19 +++++++-----
+ drivers/fpga/dfl.c                                 | 15 ++++++++--
+ drivers/fpga/dfl.h                                 | 35 +++++++++++++++++-----
+ drivers/fpga/ice40-spi.c                           | 10 +++++--
+ drivers/fpga/machxo2-spi.c                         | 12 +++++---
+ drivers/fpga/stratix10-soc.c                       |  3 +-
+ 10 files changed, 99 insertions(+), 39 deletions(-)
+Merging kunit/test (8f3d9f354286 Linux 5.7-rc1)
+$ git merge kunit/test
+Already up to date.
+Merging cel/cel-next (23cf1ee1f186 svcrdma: Fix leak of svc_rdma_recv_ctxt objects)
+$ git merge cel/cel-next
+Already up to date.
+Merging generic-ioremap/for-next (4bdc0d676a64 remove ioremap_nocache and devm_ioremap_nocache)
+$ git merge generic-ioremap/for-next
+Already up to date.
+Merging cfi/cfi/next (b6fe8bc67d2d mtd: hyperbus: move direct mapping setup to AM654 HBMC driver)
+$ git merge cfi/cfi/next
+Already up to date.
+Merging kunit-next/kunit (6cb181879881 kunit: Add missing newline in summary message)
+$ git merge kunit-next/kunit
+Merge made by the 'recursive' strategy.
+ lib/kunit/test.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+Merging trivial/for-next (fad7c9020948 err.h: remove deprecated PTR_RET for good)
+$ git merge trivial/for-next
+Already up to date.
+Merging zx2c4/for-next (16fbf79b0f83 Linux 5.6-rc7)
+$ git merge zx2c4/for-next
+Already up to date.
+Merging mhi/mhi-next (8f3d9f354286 Linux 5.7-rc1)
+$ git merge mhi/mhi-next
+Already up to date.
+Merging akpm-current/current (165d3ee0162f ipc-convert-ipcs_idr-to-xarray-update)
+$ git merge --no-ff akpm-current/current
+Removing tools/testing/selftests/x86/pkey-helpers.h
+Auto-merging net/bridge/netfilter/ebtables.c
+Auto-merging mm/vmstat.c
+Auto-merging mm/util.c
+Auto-merging mm/slub.c
+Auto-merging mm/page_alloc.c
+Auto-merging mm/page-writeback.c
+Auto-merging mm/mmap.c
+Auto-merging mm/hugetlb.c
+Auto-merging mm/gup.c
+Auto-merging mm/compaction.c
+Auto-merging mm/Makefile
+Auto-merging lib/Makefile
+Auto-merging lib/Kconfig.debug
+Auto-merging kernel/watchdog.c
+Auto-merging kernel/relay.c
+Auto-merging kernel/module.c
+Auto-merging kernel/dma/remap.c
+Auto-merging kernel/bpf/syscall.c
+Auto-merging kernel/bpf/core.c
+Auto-merging ipc/ipc_sysctl.c
+Auto-merging include/trace/events/f2fs.h
+Auto-merging include/linux/wait.h
+Auto-merging include/linux/vmstat.h
+Auto-merging include/linux/sched.h
+Auto-merging include/linux/printk.h
+CONFLICT (content): Merge conflict in include/linux/printk.h
+Auto-merging include/linux/nmi.h
+Auto-merging include/linux/netdevice.h
+Auto-merging include/linux/mmzone.h
+Auto-merging include/linux/mm.h
+Auto-merging include/linux/hugetlb.h
+Auto-merging include/linux/fs.h
+Auto-merging include/linux/compaction.h
+Removing include/asm-generic/pgtable-nop4d-hack.h
+Removing include/asm-generic/5level-fixup.h
+Auto-merging fs/sync.c
+Auto-merging fs/proc/task_mmu.c
+Auto-merging fs/fuse/file.c
+Auto-merging fs/file_table.c
+Auto-merging fs/f2fs/f2fs.h
+Auto-merging fs/f2fs/data.c
+Auto-merging fs/exfat/inode.c
+Auto-merging fs/exec.c
+Auto-merging fs/erofs/zdata.c
+Auto-merging fs/btrfs/inode.c
+Auto-merging fs/btrfs/extent_io.h
+Auto-merging fs/btrfs/extent_io.c
+Auto-merging fs/block_dev.c
+Auto-merging fs/binfmt_elf.c
+Auto-merging fs/aio.c
+Auto-merging drivers/tty/serial/sh-sci.c
+Auto-merging drivers/md/dm-bufio.c
+Auto-merging block/blk-core.c
+Auto-merging arch/x86/mm/kmmio.c
+Auto-merging arch/x86/mm/init.c
+Auto-merging arch/x86/include/asm/pgtable_types.h
+Auto-merging arch/x86/include/asm/kvm_host.h
+Auto-merging arch/x86/Kconfig.debug
+CONFLICT (content): Merge conflict in arch/x86/Kconfig.debug
+Auto-merging arch/x86/Kconfig
+Auto-merging arch/riscv/mm/init.c
+Auto-merging arch/riscv/Kconfig
+CONFLICT (content): Merge conflict in arch/riscv/Kconfig
+Auto-merging arch/powerpc/mm/hugetlbpage.c
+Auto-merging arch/mips/include/asm/pgtable.h
+Auto-merging arch/mips/Kconfig
+Auto-merging arch/arm64/include/asm/pgtable.h
+CONFLICT (content): Merge conflict in arch/arm64/include/asm/pgtable.h
+Auto-merging arch/arm64/Kconfig
+CONFLICT (content): Merge conflict in arch/arm64/Kconfig
+Removing Documentation/features/vm/numa-memblock/arch-support.txt
+Auto-merging Documentation/admin-guide/kernel-parameters.txt
+Recorded preimage for 'arch/arm64/Kconfig'
+Resolved 'arch/arm64/include/asm/pgtable.h' using previous resolution.
+Resolved 'arch/riscv/Kconfig' using previous resolution.
+Resolved 'arch/x86/Kconfig.debug' using previous resolution.
+Resolved 'include/linux/printk.h' using previous resolution.
+Automatic merge failed; fix conflicts and then commit the result.
+$ git commit -v -a
+Recorded resolution for 'arch/arm64/Kconfig'.
+[master baa6eebac639] Merge branch 'akpm-current/current'
+$ git diff -M --stat --summary HEAD^..
+ Documentation/admin-guide/dynamic-debug-howto.rst  |    5 +
+ Documentation/admin-guide/kernel-parameters.txt    |   40 +-
+ Documentation/admin-guide/mm/hugetlbpage.rst       |   35 +
+ Documentation/admin-guide/mm/transhuge.rst         |    7 +
+ Documentation/core-api/cachetlb.rst                |    2 +-
+ Documentation/dev-tools/kcov.rst                   |   17 +-
+ .../debug/debug-vm-pgtable/arch-support.txt        |   34 +
+ .../features/vm/numa-memblock/arch-support.txt     |   34 -
+ Documentation/filesystems/locking.rst              |    6 +-
+ Documentation/filesystems/vfs.rst                  |   15 +
+ Documentation/vm/memory-model.rst                  |    9 +-
+ Documentation/vm/page_owner.rst                    |    3 +-
+ arch/alpha/mm/init.c                               |   16 +-
+ arch/alpha/mm/numa.c                               |   22 +-
+ arch/arc/Kconfig                                   |    1 +
+ arch/arc/include/asm/hugepage.h                    |    2 +-
+ arch/arc/mm/init.c                                 |   36 +-
+ arch/arm/configs/omap2plus_defconfig               |    2 +-
+ arch/arm/include/asm/pgtable-3level.h              |    2 +-
+ arch/arm/include/asm/pgtable.h                     |    1 -
+ arch/arm/lib/uaccess_with_memcpy.c                 |    7 +-
+ arch/arm/mach-sa1100/assabet.c                     |    2 +-
+ arch/arm/mm/dump.c                                 |   29 +-
+ arch/arm/mm/fault-armv.c                           |    7 +-
+ arch/arm/mm/fault.c                                |   22 +-
+ arch/arm/mm/idmap.c                                |    3 +-
+ arch/arm/mm/init.c                                 |   68 +-
+ arch/arm/mm/ioremap.c                              |   12 +-
+ arch/arm/mm/mm.h                                   |    2 +-
+ arch/arm/mm/mmu.c                                  |   35 +-
+ arch/arm/mm/pgd.c                                  |   40 +-
+ arch/arm64/Kconfig                                 |    3 +-
+ arch/arm64/Kconfig.debug                           |   29 -
+ arch/arm64/include/asm/kvm_mmu.h                   |   10 +-
+ arch/arm64/include/asm/memory.h                    |   11 +
+ arch/arm64/include/asm/pgalloc.h                   |   10 +-
+ arch/arm64/include/asm/pgtable-types.h             |    5 +-
+ arch/arm64/include/asm/pgtable.h                   |   42 +-
+ arch/arm64/include/asm/stage2_pgtable.h            |   48 +-
+ arch/arm64/include/asm/vmap_stack.h                |    6 +-
+ arch/arm64/kernel/hibernate.c                      |   44 +-
+ arch/arm64/mm/fault.c                              |    9 +-
+ arch/arm64/mm/hugetlbpage.c                        |   45 +-
+ arch/arm64/mm/init.c                               |   56 +-
+ arch/arm64/mm/kasan_init.c                         |   26 +-
+ arch/arm64/mm/mmu.c                                |   52 +-
+ arch/arm64/mm/numa.c                               |    9 +-
+ arch/arm64/mm/pageattr.c                           |    7 +-
+ arch/c6x/mm/init.c                                 |    8 +-
+ arch/csky/kernel/setup.c                           |   26 +-
+ arch/h8300/include/asm/pgtable.h                   |    1 -
+ arch/h8300/mm/init.c                               |    6 +-
+ arch/hexagon/include/asm/fixmap.h                  |    4 +-
+ arch/hexagon/include/asm/pgtable.h                 |    1 -
+ arch/hexagon/mm/init.c                             |    6 +-
+ arch/ia64/Kconfig                                  |    1 -
+ arch/ia64/include/asm/pgalloc.h                    |    4 +-
+ arch/ia64/include/asm/pgtable.h                    |   17 +-
+ arch/ia64/mm/contig.c                              |    2 +-
+ arch/ia64/mm/discontig.c                           |    2 +-
+ arch/ia64/mm/fault.c                               |    7 +-
+ arch/ia64/mm/hugetlbpage.c                         |   18 +-
+ arch/ia64/mm/init.c                                |   28 +-
+ arch/m68k/mm/init.c                                |    6 +-
+ arch/m68k/mm/mcfmmu.c                              |    9 +-
+ arch/m68k/mm/motorola.c                            |   15 +-
+ arch/m68k/mm/sun3mmu.c                             |   10 +-
+ arch/microblaze/Kconfig                            |    1 -
+ arch/microblaze/mm/init.c                          |    2 +-
+ arch/mips/Kconfig                                  |    1 -
+ arch/mips/include/asm/pgtable.h                    |    2 +-
+ arch/mips/loongson64/numa.c                        |    2 +-
+ arch/mips/mm/init.c                                |    2 +-
+ arch/mips/sgi-ip27/ip27-memory.c                   |    2 +-
+ arch/nds32/mm/init.c                               |   11 +-
+ arch/nios2/include/asm/pgtable.h                   |    3 +-
+ arch/nios2/mm/fault.c                              |    9 +-
+ arch/nios2/mm/init.c                               |    8 +-
+ arch/nios2/mm/ioremap.c                            |    6 +-
+ arch/openrisc/include/asm/pgtable.h                |    1 -
+ arch/openrisc/mm/fault.c                           |   10 +-
+ arch/openrisc/mm/init.c                            |   13 +-
+ arch/parisc/mm/init.c                              |   22 +-
+ arch/powerpc/Kconfig                               |   11 +-
+ arch/powerpc/include/asm/book3s/32/pgtable.h       |    1 -
+ arch/powerpc/include/asm/book3s/64/hash.h          |    4 +-
+ arch/powerpc/include/asm/book3s/64/pgalloc.h       |    4 +-
+ arch/powerpc/include/asm/book3s/64/pgtable.h       |   64 +-
+ arch/powerpc/include/asm/book3s/64/radix.h         |    6 +-
+ arch/powerpc/include/asm/io.h                      |   10 +-
+ arch/powerpc/include/asm/nohash/32/pgtable.h       |    1 -
+ arch/powerpc/include/asm/nohash/64/pgalloc.h       |    2 +-
+ arch/powerpc/include/asm/nohash/64/pgtable-4k.h    |   32 +-
+ arch/powerpc/include/asm/nohash/64/pgtable.h       |    6 +-
+ arch/powerpc/include/asm/pci-bridge.h              |    2 +-
+ arch/powerpc/include/asm/pgtable.h                 |   10 +-
+ arch/powerpc/kernel/irq.c                          |    5 +-
+ arch/powerpc/kernel/isa-bridge.c                   |   28 +-
+ arch/powerpc/kernel/pci_64.c                       |   54 +-
+ arch/powerpc/kvm/book3s_64_mmu_radix.c             |   32 +-
+ arch/powerpc/lib/code-patching.c                   |    7 +-
+ arch/powerpc/mm/book3s64/hash_pgtable.c            |    4 +-
+ arch/powerpc/mm/book3s64/radix_pgtable.c           |   26 +-
+ arch/powerpc/mm/book3s64/subpage_prot.c            |    6 +-
+ arch/powerpc/mm/hugetlbpage.c                      |   58 +-
+ arch/powerpc/mm/ioremap_64.c                       |   50 -
+ arch/powerpc/mm/kasan/kasan_init_32.c              |    2 +-
+ arch/powerpc/mm/mem.c                              |    2 +-
+ arch/powerpc/mm/nohash/book3e_pgtable.c            |   15 +-
+ arch/powerpc/mm/pgtable.c                          |   30 +-
+ arch/powerpc/mm/pgtable_64.c                       |   10 +-
+ arch/powerpc/mm/ptdump/hashpagetable.c             |   20 +-
+ arch/powerpc/mm/ptdump/ptdump.c                    |   14 +-
+ arch/powerpc/platforms/pseries/hotplug-memory.c    |   26 +-
+ arch/powerpc/xmon/xmon.c                           |   18 +-
+ arch/riscv/Kconfig                                 |    2 +-
+ arch/riscv/include/asm/pgtable.h                   |    4 +-
+ arch/riscv/include/asm/ptdump.h                    |   11 +
+ arch/riscv/mm/hugetlbpage.c                        |   24 +-
+ arch/riscv/mm/init.c                               |    5 +-
+ arch/s390/Kconfig                                  |    2 +-
+ arch/s390/kernel/setup.c                           |    9 +-
+ arch/s390/mm/hugetlbpage.c                         |   24 +-
+ arch/s390/mm/init.c                                |    2 +-
+ arch/sh/Kconfig                                    |    1 -
+ arch/sh/include/asm/pgtable-2level.h               |    1 -
+ arch/sh/include/asm/pgtable-3level.h               |    1 -
+ arch/sh/include/asm/pgtable_32.h                   |    5 +-
+ arch/sh/include/asm/pgtable_64.h                   |    5 +-
+ arch/sh/kernel/cpu/sh4/sq.c                        |    3 +-
+ arch/sh/kernel/io_trapped.c                        |    7 +-
+ arch/sh/mm/cache-sh4.c                             |    4 +-
+ arch/sh/mm/cache-sh5.c                             |    7 +-
+ arch/sh/mm/fault.c                                 |   65 +-
+ arch/sh/mm/hugetlbpage.c                           |   28 +-
+ arch/sh/mm/init.c                                  |   17 +-
+ arch/sh/mm/kmap.c                                  |    2 +-
+ arch/sh/mm/tlbex_32.c                              |    6 +-
+ arch/sh/mm/tlbex_64.c                              |    7 +-
+ arch/sparc/Kconfig                                 |   10 -
+ arch/sparc/mm/init_64.c                            |   45 +-
+ arch/sparc/mm/srmmu.c                              |   21 +-
+ arch/um/kernel/mem.c                               |   12 +-
+ arch/unicore32/include/asm/memory.h                |    2 +-
+ arch/unicore32/include/asm/pgtable.h               |    1 -
+ arch/unicore32/include/mach/memory.h               |    6 +-
+ arch/unicore32/kernel/hibernate.c                  |    4 +-
+ arch/unicore32/kernel/pci.c                        |   14 +-
+ arch/unicore32/mm/init.c                           |   43 +-
+ arch/x86/Kconfig                                   |   12 +-
+ arch/x86/Kconfig.debug                             |   27 -
+ arch/x86/hyperv/hv_init.c                          |    5 +-
+ arch/x86/include/asm/kvm_host.h                    |    3 +-
+ arch/x86/include/asm/pgtable.h                     |    2 +-
+ arch/x86/include/asm/pgtable_64.h                  |    6 +
+ arch/x86/include/asm/pgtable_types.h               |    8 +-
+ arch/x86/kernel/irq_64.c                           |    2 +-
+ arch/x86/kvm/svm/sev.c                             |    5 +-
+ arch/x86/mm/hugetlbpage.c                          |   23 +-
+ arch/x86/mm/init.c                                 |    2 +-
+ arch/x86/mm/kmmio.c                                |    2 +-
+ arch/x86/mm/numa.c                                 |   11 +-
+ arch/xtensa/mm/init.c                              |    8 +-
+ block/blk-core.c                                   |    1 +
+ drivers/base/memory.c                              |   44 +-
+ drivers/block/drbd/drbd_bitmap.c                   |    4 +-
+ drivers/dax/device.c                               |    1 +
+ drivers/gpu/drm/drm_scatter.c                      |   11 +-
+ drivers/gpu/drm/etnaviv/etnaviv_dump.c             |    4 +-
+ drivers/gpu/drm/i915/gem/selftests/mock_dmabuf.c   |    2 +-
+ drivers/lightnvm/pblk-init.c                       |    5 +-
+ drivers/md/dm-bufio.c                              |    4 +-
+ drivers/media/common/videobuf2/videobuf2-dma-sg.c  |    3 +-
+ drivers/media/common/videobuf2/videobuf2-vmalloc.c |    3 +-
+ drivers/mtd/ubi/io.c                               |    4 +-
+ drivers/pcmcia/electra_cf.c                        |   45 +-
+ drivers/rapidio/devices/rio_mport_cdev.c           |   14 +-
+ drivers/scsi/sd_zbc.c                              |    3 +-
+ drivers/staging/android/ion/ion_heap.c             |    4 +-
+ drivers/staging/media/ipu3/ipu3-css-pool.h         |    4 +-
+ drivers/staging/media/ipu3/ipu3-dmamap.c           |   30 +-
+ drivers/tty/serial/sh-sci.c                        |    2 +-
+ drivers/tty/vt/keyboard.c                          |    2 +
+ drivers/usb/core/hcd.c                             |    3 +
+ fs/aio.c                                           |    9 +-
+ fs/binfmt_elf.c                                    |    6 +-
+ fs/block_dev.c                                     |    7 +-
+ fs/btrfs/extent_io.c                               |   43 +-
+ fs/btrfs/extent_io.h                               |    3 +-
+ fs/btrfs/inode.c                                   |   16 +-
+ fs/buffer.c                                        |   63 +-
+ fs/erofs/data.c                                    |   39 +-
+ fs/erofs/decompressor.c                            |    2 +-
+ fs/erofs/zdata.c                                   |   29 +-
+ fs/eventpoll.c                                     |   18 +-
+ fs/exec.c                                          |   14 +-
+ fs/exfat/inode.c                                   |    7 +-
+ fs/ext2/inode.c                                    |   10 +-
+ fs/ext4/ext4.h                                     |    5 +-
+ fs/ext4/inode.c                                    |   21 +-
+ fs/ext4/readpage.c                                 |   25 +-
+ fs/ext4/verity.c                                   |   35 +-
+ fs/f2fs/data.c                                     |   50 +-
+ fs/f2fs/f2fs.h                                     |    3 -
+ fs/f2fs/verity.c                                   |   35 +-
+ fs/fat/fatent.c                                    |  103 +-
+ fs/fat/inode.c                                     |   13 +-
+ fs/file_table.c                                    |    1 +
+ fs/fuse/file.c                                     |  100 +-
+ fs/gfs2/aops.c                                     |   23 +-
+ fs/gfs2/dir.c                                      |    9 +-
+ fs/gfs2/quota.c                                    |    2 +-
+ fs/hpfs/file.c                                     |    7 +-
+ fs/iomap/buffered-io.c                             |   92 +-
+ fs/iomap/trace.h                                   |    2 +-
+ fs/isofs/inode.c                                   |    7 +-
+ fs/jfs/inode.c                                     |    7 +-
+ fs/mpage.c                                         |   38 +-
+ fs/nfs/blocklayout/extent_tree.c                   |    2 +-
+ fs/nilfs2/inode.c                                  |   15 +-
+ fs/ntfs/malloc.h                                   |    2 +-
+ fs/ocfs2/aops.c                                    |   34 +-
+ fs/ocfs2/dlm/dlmmaster.c                           |    1 +
+ fs/ocfs2/ocfs2.h                                   |    4 +-
+ fs/ocfs2/slot_map.c                                |   46 +-
+ fs/ocfs2/super.c                                   |   21 +
+ fs/omfs/file.c                                     |    7 +-
+ fs/open.c                                          |    3 +-
+ fs/proc/array.c                                    |    8 +-
+ fs/proc/page.c                                     |   40 +-
+ fs/proc/task_mmu.c                                 |   16 +-
+ fs/qnx6/inode.c                                    |    7 +-
+ fs/ramfs/inode.c                                   |   12 +
+ fs/reiserfs/inode.c                                |    8 +-
+ fs/seq_file.c                                      |    7 +-
+ fs/squashfs/block.c                                |  273 +++---
+ fs/squashfs/decompressor.h                         |    5 +-
+ fs/squashfs/decompressor_multi.c                   |    9 +-
+ fs/squashfs/decompressor_multi_percpu.c            |   17 +-
+ fs/squashfs/decompressor_single.c                  |    9 +-
+ fs/squashfs/lz4_wrapper.c                          |   17 +-
+ fs/squashfs/lzo_wrapper.c                          |   17 +-
+ fs/squashfs/squashfs.h                             |    4 +-
+ fs/squashfs/xz_wrapper.c                           |   51 +-
+ fs/squashfs/zlib_wrapper.c                         |   63 +-
+ fs/squashfs/zstd_wrapper.c                         |   64 +-
+ fs/sync.c                                          |    6 +-
+ fs/ubifs/debug.c                                   |    2 +-
+ fs/ubifs/lprops.c                                  |    2 +-
+ fs/ubifs/lpt_commit.c                              |    4 +-
+ fs/ubifs/orphan.c                                  |    2 +-
+ fs/udf/inode.c                                     |    7 +-
+ fs/xfs/kmem.c                                      |    2 +-
+ fs/xfs/xfs_aops.c                                  |   13 +-
+ fs/xfs/xfs_buf.c                                   |    2 +-
+ fs/zonefs/super.c                                  |    7 +-
+ include/asm-generic/5level-fixup.h                 |   58 --
+ include/asm-generic/pgtable-nop4d-hack.h           |   64 --
+ include/asm-generic/pgtable-nopud.h                |    4 -
+ include/asm-generic/pgtable.h                      |    4 +
+ include/linux/compaction.h                         |    9 +-
+ include/linux/dev_printk.h                         |    6 +-
+ include/linux/dynamic_debug.h                      |    2 +-
+ include/linux/elfnote.h                            |    2 +-
+ include/linux/fs.h                                 |   18 +
+ include/linux/gfp.h                                |    7 +-
+ include/linux/hugetlb.h                            |    2 +-
+ include/linux/iomap.h                              |    3 +-
+ include/linux/ipc_namespace.h                      |   12 +-
+ include/linux/memblock.h                           |    8 +-
+ include/linux/memcontrol.h                         |   45 +-
+ include/linux/memory_hotplug.h                     |    7 -
+ include/linux/memremap.h                           |    6 +
+ include/linux/mm.h                                 |   61 +-
+ include/linux/mmzone.h                             |   25 +-
+ include/linux/mpage.h                              |    4 +-
+ include/linux/net.h                                |    3 +-
+ include/linux/netdevice.h                          |    6 +-
+ include/linux/nmi.h                                |    1 +
+ include/linux/pagemap.h                            |  156 ++-
+ include/linux/printk.h                             |    9 +-
+ include/linux/sched.h                              |   11 +
+ include/linux/string.h                             |   60 +-
+ include/linux/vmalloc.h                            |   31 +-
+ include/linux/vmstat.h                             |    1 +
+ include/linux/wait.h                               |    4 +-
+ include/linux/zsmalloc.h                           |    2 +-
+ include/rdma/ib_verbs.h                            |    6 +-
+ include/trace/events/compaction.h                  |   22 +-
+ include/trace/events/erofs.h                       |    6 +-
+ include/trace/events/f2fs.h                        |    6 +-
+ include/trace/events/huge_memory.h                 |    3 +-
+ include/trace/events/vmscan.h                      |   14 +-
+ init/initramfs.c                                   |    4 +-
+ ipc/ipc_sysctl.c                                   |   14 +-
+ ipc/mqueue.c                                       |   34 +-
+ ipc/msg.c                                          |    3 +-
+ ipc/namespace.c                                    |   37 +-
+ ipc/sem.c                                          |    1 -
+ ipc/shm.c                                          |   60 +-
+ ipc/util.c                                         |  171 ++--
+ ipc/util.h                                         |    4 +-
+ kernel/bpf/core.c                                  |    6 +-
+ kernel/bpf/syscall.c                               |   25 +-
+ kernel/dma/remap.c                                 |   48 +-
+ kernel/groups.c                                    |    2 +-
+ kernel/hung_task.c                                 |   44 +
+ kernel/kcov.c                                      |  270 +++--
+ kernel/kexec_core.c                                |   56 ++
+ kernel/module.c                                    |    3 +-
+ kernel/relay.c                                     |   17 +-
+ kernel/user.c                                      |    2 +-
+ kernel/watchdog.c                                  |   22 +
+ kernel/watchdog_hld.c                              |    1 +
+ lib/Kconfig.debug                                  |   54 +
+ lib/Kconfig.twist                                  |   26 +
+ lib/Makefile                                       |    2 +-
+ lib/cpumask.c                                      |  102 +-
+ lib/dynamic_debug.c                                |    9 +-
+ lib/math/prime_numbers.c                           |   10 +-
+ lib/strncpy_from_user.c                            |    1 +
+ lib/test_kasan.c                                   |   29 +-
+ lib/test_lockup.c                                  |    2 +-
+ lib/test_vmalloc.c                                 |   26 +-
+ lib/ubsan.c                                        |   33 +-
+ mm/Kconfig                                         |   10 +-
+ mm/Kconfig.debug                                   |   33 +
+ mm/Makefile                                        |    1 +
+ mm/compaction.c                                    |   68 +-
+ mm/debug.c                                         |   56 +-
+ mm/debug_vm_pgtable.c                              |  382 ++++++++
+ mm/fadvise.c                                       |    6 +-
+ mm/filemap.c                                       |    2 +-
+ mm/frontswap.c                                     |    6 +-
+ mm/gup.c                                           |   65 +-
+ mm/huge_memory.c                                   |  259 +----
+ mm/hugetlb.c                                       |  224 +++--
+ mm/internal.h                                      |   37 +-
+ mm/kasan/init.c                                    |   11 -
+ mm/khugepaged.c                                    |  254 +++--
+ mm/ksm.c                                           |   10 +-
+ mm/list_lru.c                                      |    2 +-
+ mm/memblock.c                                      |   21 +-
+ mm/memcontrol.c                                    |  113 +--
+ mm/memory.c                                        |   12 +-
+ mm/memory_hotplug.c                                |  133 +--
+ mm/mempolicy.c                                     |    5 +-
+ mm/memremap.c                                      |   20 +
+ mm/migrate.c                                       |    2 +-
+ mm/mm_init.c                                       |   16 +-
+ mm/mmap.c                                          |   45 +-
+ mm/mremap.c                                        |    2 +-
+ mm/nommu.c                                         |   34 +-
+ mm/oom_kill.c                                      |    4 +-
+ mm/page-writeback.c                                |    2 +-
+ mm/page_alloc.c                                    |  504 ++++------
+ mm/page_owner.c                                    |    7 +-
+ mm/percpu.c                                        |    2 +-
+ mm/pgtable-generic.c                               |    2 +-
+ mm/readahead.c                                     |  275 +++---
+ mm/slab.c                                          |    4 +-
+ mm/slab_common.c                                   |    3 +-
+ mm/slub.c                                          |  118 ++-
+ mm/sparse.c                                        |    2 +-
+ mm/swap_state.c                                    |    5 +-
+ mm/swapfile.c                                      |  102 +-
+ mm/util.c                                          |    2 +-
+ mm/vmalloc.c                                       |  257 ++---
+ mm/vmscan.c                                        |  181 ++--
+ mm/vmstat.c                                        |   12 +-
+ mm/zbud.c                                          |    2 +-
+ mm/zsmalloc.c                                      |   12 +-
+ net/bridge/netfilter/ebtables.c                    |    6 +-
+ net/ceph/ceph_common.c                             |    3 +-
+ scripts/checkpatch.pl                              |   73 +-
+ scripts/decodecode                                 |    2 +-
+ scripts/gdb/linux/rbtree.py                        |    4 +-
+ scripts/get_maintainer.pl                          |   44 +-
+ sound/core/memalloc.c                              |    2 +-
+ sound/core/pcm_memory.c                            |    2 +-
+ tools/testing/selftests/vm/.gitignore              |    1 +
+ tools/testing/selftests/vm/Makefile                |   74 ++
+ tools/testing/selftests/vm/khugepaged.c            | 1035 ++++++++++++++++++++
+ tools/testing/selftests/vm/mremap_dontunmap.c      |    1 -
+ tools/testing/selftests/vm/pkey-helpers.h          |  225 +++++
+ tools/testing/selftests/vm/pkey-powerpc.h          |  136 +++
+ tools/testing/selftests/vm/pkey-x86.h              |  181 ++++
+ .../selftests/{x86 => vm}/protection_keys.c        |  696 +++++++------
+ tools/testing/selftests/vm/write_to_hugetlbfs.c    |    2 -
+ tools/testing/selftests/x86/.gitignore             |    1 -
+ tools/testing/selftests/x86/Makefile               |    2 +-
+ tools/testing/selftests/x86/pkey-helpers.h         |  219 -----
+ tools/vm/page_owner_sort.c                         |    5 +-
+ virt/kvm/arm/mmu.c                                 |  209 +++-
+ 394 files changed, 7332 insertions(+), 4838 deletions(-)
+ create mode 100644 Documentation/features/debug/debug-vm-pgtable/arch-support.txt
+ delete mode 100644 Documentation/features/vm/numa-memblock/arch-support.txt
+ delete mode 100644 include/asm-generic/5level-fixup.h
+ delete mode 100644 include/asm-generic/pgtable-nop4d-hack.h
+ create mode 100644 lib/Kconfig.twist
+ create mode 100644 mm/debug_vm_pgtable.c
+ create mode 100644 tools/testing/selftests/vm/khugepaged.c
+ create mode 100644 tools/testing/selftests/vm/pkey-helpers.h
+ create mode 100644 tools/testing/selftests/vm/pkey-powerpc.h
+ create mode 100644 tools/testing/selftests/vm/pkey-x86.h
+ rename tools/testing/selftests/{x86 => vm}/protection_keys.c (74%)
+ delete mode 100644 tools/testing/selftests/x86/pkey-helpers.h
+$ git clone -s -l -n -q . ../rebase-tmp
+$ cd ../rebase-tmp
+$ git checkout -b akpm remotes/origin/akpm/master
+Switched to a new branch 'akpm'
+$ git rebase --onto master remotes/origin/akpm/master-base
+Rebasing (1/98)
Rebasing (2/98)
Rebasing (3/98)
Rebasing (4/98)
Rebasing (5/98)
Rebasing (6/98)
Rebasing (7/98)
Rebasing (8/98)
Rebasing (9/98)
Rebasing (10/98)
Rebasing (11/98)
Rebasing (12/98)
Rebasing (13/98)
Rebasing (14/98)
Rebasing (15/98)
Rebasing (16/98)
Rebasing (17/98)
Rebasing (18/98)
Rebasing (19/98)
Rebasing (20/98)
Rebasing (21/98)
Rebasing (22/98)
Rebasing (23/98)
Rebasing (24/98)
Rebasing (25/98)
Rebasing (26/98)
Rebasing (27/98)
Rebasing (28/98)
Rebasing (29/98)
Rebasing (30/98)
Rebasing (31/98)
Rebasing (32/98)
Rebasing (33/98)
Rebasing (34/98)
Rebasing (35/98)
Rebasing (36/98)
Rebasing (37/98)
Rebasing (38/98)
Rebasing (39/98)
Rebasing (40/98)
Rebasing (41/98)
Rebasing (42/98)
Rebasing (43/98)
Rebasing (44/98)
Rebasing (45/98)
Rebasing (46/98)
Rebasing (47/98)
Rebasing (48/98)
Rebasing (49/98)
Rebasing (50/98)
Rebasing (51/98)
Rebasing (52/98)
Rebasing (53/98)
Rebasing (54/98)
Rebasing (55/98)
Rebasing (56/98)
Rebasing (57/98)
Rebasing (58/98)
Rebasing (59/98)
Rebasing (60/98)
Rebasing (61/98)
Rebasing (62/98)
Rebasing (63/98)
Rebasing (64/98)
Rebasing (65/98)
Rebasing (66/98)
Rebasing (67/98)
Rebasing (68/98)
Rebasing (69/98)
Rebasing (70/98)
Rebasing (71/98)
Rebasing (72/98)
Rebasing (73/98)
Rebasing (74/98)
Rebasing (75/98)
Rebasing (76/98)
Rebasing (77/98)
Rebasing (78/98)
Rebasing (79/98)
Rebasing (80/98)
Rebasing (81/98)
Rebasing (82/98)
Rebasing (83/98)
Rebasing (84/98)
Rebasing (85/98)
Rebasing (86/98)
Rebasing (87/98)
Rebasing (88/98)
Rebasing (89/98)
Rebasing (90/98)
Rebasing (91/98)
Rebasing (92/98)
Rebasing (93/98)
Rebasing (94/98)
Rebasing (95/98)
Rebasing (96/98)
Rebasing (97/98)
Rebasing (98/98)

[KSuccessfully rebased and updated refs/heads/akpm.
+$ cd ../next
+$ git fetch -f ../rebase-tmp akpm:akpm/master
+From ../rebase-tmp
+ + 33a552469131...8d69f40b20a7 akpm       -> akpm/master  (forced update)
+$ rm -rf ../rebase-tmp
+Merging akpm/master (8d69f40b20a7 drivers/media/platform/sti/delta/delta-ipc.c: fix read buffer overflow)
+$ git merge --no-ff akpm/master
+Removing mm/mmu_context.c
+Merge made by the 'recursive' strategy.
+ Documentation/admin-guide/kernel-parameters.txt    |  11 +-
+ Documentation/admin-guide/sysctl/kernel.rst        |  30 +++
+ arch/alpha/kernel/syscalls/syscall.tbl             |   1 +
+ arch/alpha/kernel/traps.c                          |  22 +--
+ arch/arc/include/asm/bug.h                         |   3 +-
+ arch/arc/kernel/stacktrace.c                       |  17 +-
+ arch/arc/kernel/troubleshoot.c                     |   2 +-
+ arch/arm/include/asm/bug.h                         |   3 +-
+ arch/arm/include/asm/traps.h                       |   3 +-
+ arch/arm/include/asm/unwind.h                      |   3 +-
+ arch/arm/kernel/traps.c                            |  39 ++--
+ arch/arm/kernel/unwind.c                           |   5 +-
+ arch/arm/lib/backtrace-clang.S                     |   9 +-
+ arch/arm/lib/backtrace.S                           |  14 +-
+ arch/arm/tools/syscall.tbl                         |   1 +
+ arch/arm64/include/asm/stacktrace.h                |   3 +-
+ arch/arm64/include/asm/unistd.h                    |   2 +-
+ arch/arm64/include/asm/unistd32.h                  |   2 +
+ arch/arm64/kernel/process.c                        |   2 +-
+ arch/arm64/kernel/traps.c                          |  17 +-
+ arch/c6x/kernel/traps.c                            |  16 +-
+ arch/csky/kernel/dumpstack.c                       |   9 +-
+ arch/csky/kernel/ptrace.c                          |   4 +-
+ arch/h8300/kernel/traps.c                          |  12 +-
+ arch/hexagon/kernel/traps.c                        |  25 ++-
+ arch/ia64/include/asm/ptrace.h                     |   1 -
+ arch/ia64/kernel/mca.c                             |   2 +-
+ arch/ia64/kernel/process.c                         |  17 +-
+ arch/ia64/kernel/syscalls/syscall.tbl              |   1 +
+ arch/m68k/kernel/syscalls/syscall.tbl              |   1 +
+ arch/m68k/kernel/traps.c                           |  13 +-
+ arch/microblaze/include/asm/unwind.h               |   3 +-
+ arch/microblaze/kernel/stacktrace.c                |   4 +-
+ arch/microblaze/kernel/syscalls/syscall.tbl        |   1 +
+ arch/microblaze/kernel/traps.c                     |  12 +-
+ arch/microblaze/kernel/unwind.c                    |  40 ++--
+ arch/mips/kernel/syscalls/syscall_n32.tbl          |   1 +
+ arch/mips/kernel/syscalls/syscall_n64.tbl          |   1 +
+ arch/mips/kernel/traps.c                           |  35 ++--
+ arch/nds32/kernel/traps.c                          |  15 +-
+ arch/nios2/kernel/traps.c                          |  17 +-
+ arch/openrisc/kernel/traps.c                       |  12 +-
+ arch/parisc/kernel/syscalls/syscall.tbl            |   1 +
+ arch/parisc/kernel/traps.c                         |  24 +--
+ arch/powerpc/kernel/process.c                      |  15 +-
+ arch/powerpc/kernel/stacktrace.c                   |   2 +-
+ arch/powerpc/kernel/syscalls/syscall.tbl           |   1 +
+ arch/powerpc/platforms/powernv/vas-fault.c         |   4 +-
+ arch/riscv/kernel/stacktrace.c                     |   9 +-
+ arch/s390/kernel/dumpstack.c                       |  13 +-
+ arch/s390/kernel/syscalls/syscall.tbl              |   1 +
+ arch/sh/include/asm/kdebug.h                       |   6 +-
+ arch/sh/include/asm/processor_32.h                 |   2 +-
+ arch/sh/kernel/dumpstack.c                         |  36 ++--
+ arch/sh/kernel/process_32.c                        |   2 +-
+ arch/sh/kernel/process_64.c                        |   3 +-
+ arch/sh/kernel/syscalls/syscall.tbl                |   1 +
+ arch/sh/kernel/traps.c                             |   4 +-
+ arch/sh/mm/fault.c                                 |   2 +-
+ arch/sparc/kernel/process_32.c                     |  10 +-
+ arch/sparc/kernel/process_64.c                     |   2 +-
+ arch/sparc/kernel/syscalls/syscall.tbl             |   1 +
+ arch/sparc/kernel/traps_64.c                       |   9 +-
+ arch/um/drivers/mconsole_kern.c                    |   2 +-
+ arch/um/kernel/sysrq.c                             |  23 +--
+ arch/unicore32/kernel/setup.h                      |   2 +-
+ arch/unicore32/kernel/traps.c                      |  34 ++--
+ arch/unicore32/lib/backtrace.S                     |  24 ++-
+ arch/x86/entry/syscalls/syscall_32.tbl             |   1 +
+ arch/x86/entry/syscalls/syscall_64.tbl             |   2 +
+ arch/x86/include/asm/stacktrace.h                  |   2 +-
+ arch/x86/kernel/amd_gart_64.c                      |   2 +-
+ arch/x86/kernel/dumpstack.c                        |   9 +-
+ arch/xtensa/kernel/syscalls/syscall.tbl            |   1 +
+ arch/xtensa/kernel/traps.c                         |  22 ++-
+ drivers/base/power/main.c                          |   2 +-
+ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h         |   7 +-
+ .../gpu/drm/amd/amdgpu/amdgpu_amdkfd_arcturus.c    |   1 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c |   1 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c  |   2 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c  |   2 -
+ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c  |   2 -
+ drivers/gpu/drm/i915/gvt/gvt.c                     |   1 -
+ drivers/gpu/drm/i915/gvt/hypercall.h               |   2 -
+ drivers/gpu/drm/i915/gvt/kvmgt.c                   |   2 +-
+ drivers/media/platform/sti/delta/delta-ipc.c       |   4 +-
+ drivers/tty/sysrq.c                                |   2 +-
+ drivers/usb/gadget/function/f_fs.c                 |  10 +-
+ drivers/usb/gadget/legacy/inode.c                  |   6 +-
+ drivers/vfio/vfio_iommu_type1.c                    |   6 +-
+ drivers/vhost/vhost.c                              |   8 +-
+ fs/aio.c                                           |   1 -
+ fs/io-wq.c                                         |  15 +-
+ fs/io_uring.c                                      |  11 +-
+ fs/proc/proc_sysctl.c                              | 142 ++++++++++++++
+ include/linux/compat.h                             |   4 +
+ include/linux/kallsyms.h                           |   4 +-
+ include/linux/kernel.h                             |   6 +
+ include/linux/kthread.h                            |   5 +
+ include/linux/memcontrol.h                         |   2 +-
+ include/linux/mm.h                                 |   4 +-
+ include/linux/mmu_context.h                        |   5 -
+ include/linux/pid.h                                |   1 +
+ include/linux/sched/debug.h                        |   3 +-
+ include/linux/sched/sysctl.h                       |   7 +
+ include/linux/syscalls.h                           |   3 +
+ include/linux/sysctl.h                             |   4 +
+ include/uapi/asm-generic/unistd.h                  |   5 +-
+ init/main.c                                        |   2 +
+ kernel/debug/kdb/kdb_bt.c                          |  15 +-
+ kernel/exit.c                                      |  17 --
+ kernel/hung_task.c                                 |  30 +--
+ kernel/kthread.c                                   |  61 ++++++
+ kernel/locking/lockdep.c                           |   4 +-
+ kernel/locking/rtmutex-debug.c                     |   2 +-
+ kernel/panic.c                                     |  11 ++
+ kernel/pid.c                                       |  17 ++
+ kernel/sched/core.c                                |   8 +-
+ kernel/sys_ni.c                                    |   2 +
+ kernel/sysctl.c                                    |  42 +++-
+ kernel/trace/ftrace.c                              |   8 +-
+ lib/dump_stack.c                                   |   2 +-
+ lib/test_sysctl.c                                  |  13 ++
+ mm/Makefile                                        |   2 +-
+ mm/filemap.c                                       |  20 +-
+ mm/frontswap.c                                     |   8 +-
+ mm/kmemleak.c                                      |   2 +
+ mm/list_lru.c                                      |   2 +-
+ mm/madvise.c                                       | 213 ++++++++++++++++++---
+ mm/memory.c                                        |   4 +-
+ mm/mempool.c                                       |   2 +-
+ mm/mmap.c                                          |  28 +--
+ mm/mmu_context.c                                   |  64 -------
+ mm/oom_kill.c                                      |   6 +-
+ mm/page_alloc.c                                    |   9 -
+ mm/page_counter.c                                  |  13 +-
+ mm/page_io.c                                       |   8 +-
+ mm/rmap.c                                          |   2 +-
+ mm/swap.c                                          |   5 +-
+ mm/swap_state.c                                    |   4 +-
+ mm/swapfile.c                                      |  31 +--
+ mm/util.c                                          |   8 +-
+ mm/vmacache.c                                      |   4 +-
+ net/ipv4/tcp.c                                     |  70 ++++++-
+ tools/include/linux/kallsyms.h                     |   2 +-
+ tools/testing/selftests/sysctl/sysctl.sh           |  42 +++-
+ 146 files changed, 1176 insertions(+), 590 deletions(-)
+ delete mode 100644 mm/mmu_context.c
diff --git a/Next/quilt-import.log b/Next/quilt-import.log
new file mode 100644
index 000000000000..17761a06ce4d
--- /dev/null
+++ b/Next/quilt-import.log
@@ -0,0 +1,2 @@
+Importing dmi based on 5.6
+Unchanged quilt series dmi
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 36d42da7466a..c82952e6fb80 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -477,3 +477,4 @@
 # 545 reserved for clone3
 547	common	openat2				sys_openat2
 548	common	pidfd_getfd			sys_pidfd_getfd
+549	common	process_madvise			sys_process_madvise
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index f6b9664ac504..8383ccfaccdc 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -121,10 +121,10 @@ dik_show_code(unsigned int *pc)
 }
 
 static void
-dik_show_trace(unsigned long *sp)
+dik_show_trace(unsigned long *sp, const char *loglvl)
 {
 	long i = 0;
-	printk("Trace:\n");
+	printk("%sTrace:\n", loglvl);
 	while (0x1ff8 & (unsigned long) sp) {
 		extern char _stext[], _etext[];
 		unsigned long tmp = *sp;
@@ -133,24 +133,24 @@ dik_show_trace(unsigned long *sp)
 			continue;
 		if (tmp >= (unsigned long) &_etext)
 			continue;
-		printk("[<%lx>] %pSR\n", tmp, (void *)tmp);
+		printk("%s[<%lx>] %pSR\n", loglvl, tmp, (void *)tmp);
 		if (i > 40) {
-			printk(" ...");
+			printk("%s ...", loglvl);
 			break;
 		}
 	}
-	printk("\n");
+	printk("%s\n", loglvl);
 }
 
 static int kstack_depth_to_print = 24;
 
-void show_stack(struct task_struct *task, unsigned long *sp)
+void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
 {
 	unsigned long *stack;
 	int i;
 
 	/*
-	 * debugging aid: "show_stack(NULL);" prints the
+	 * debugging aid: "show_stack(NULL, NULL, KERN_EMERG);" prints the
 	 * back trace for this cpu.
 	 */
 	if(sp==NULL)
@@ -163,14 +163,14 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 		if ((i % 4) == 0) {
 			if (i)
 				pr_cont("\n");
-			printk("       ");
+			printk("%s       ", loglvl);
 		} else {
 			pr_cont(" ");
 		}
 		pr_cont("%016lx", *stack++);
 	}
 	pr_cont("\n");
-	dik_show_trace(sp);
+	dik_show_trace(sp, loglvl);
 }
 
 void
@@ -184,7 +184,7 @@ die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
 	printk("%s(%d): %s %ld\n", current->comm, task_pid_nr(current), str, err);
 	dik_show_regs(regs, r9_15);
 	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
-	dik_show_trace((unsigned long *)(regs+1));
+	dik_show_trace((unsigned long *)(regs+1), KERN_DEFAULT);
 	dik_show_code((unsigned int *)regs->pc);
 
 	if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
@@ -625,7 +625,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 	printk("gp = %016lx  sp = %p\n", regs->gp, regs+1);
 
 	dik_show_code((unsigned int *)pc);
-	dik_show_trace((unsigned long *)(regs+1));
+	dik_show_trace((unsigned long *)(regs+1), KERN_DEFAULT);
 
 	if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
 		printk("die_if_kernel recursion detected.\n");
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 12e218d3792a..667cd21393b5 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -243,21 +243,17 @@ callback_init(void * kernel_end)
  */
 void __init paging_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES] = {0, };
-	unsigned long dma_pfn, high_pfn;
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = {0, };
+	unsigned long dma_pfn;
 
 	dma_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-	high_pfn = max_pfn = max_low_pfn;
+	max_pfn = max_low_pfn;
 
-	if (dma_pfn >= high_pfn)
-		zones_size[ZONE_DMA] = high_pfn;
-	else {
-		zones_size[ZONE_DMA] = dma_pfn;
-		zones_size[ZONE_NORMAL] = high_pfn - dma_pfn;
-	}
+	max_zone_pfn[ZONE_DMA] = dma_pfn;
+	max_zone_pfn[ZONE_NORMAL] = max_pfn;
 
 	/* Initialize mem_map[].  */
-	free_area_init(zones_size);
+	free_area_init(max_zone_pfn);
 
 	/* Initialize the kernel's ZERO_PGE. */
 	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index d0b73371e985..5ad6087de1d6 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -144,8 +144,8 @@ setup_memory_node(int nid, void *kernel_end)
 	if (!nid && (node_max_pfn < end_kernel_pfn || node_min_pfn > start_kernel_pfn))
 		panic("kernel loaded out of ram");
 
-	memblock_add(PFN_PHYS(node_min_pfn),
-		     (node_max_pfn - node_min_pfn) << PAGE_SHIFT);
+	memblock_add_node(PFN_PHYS(node_min_pfn),
+			  (node_max_pfn - node_min_pfn) << PAGE_SHIFT, nid);
 
 	/* Zone start phys-addr must be 2^(MAX_ORDER-1) aligned.
 	   Note that we round this down, not up - node memory
@@ -202,8 +202,7 @@ setup_memory(void *kernel_end)
 
 void __init paging_init(void)
 {
-	unsigned int    nid;
-	unsigned long   zones_size[MAX_NR_ZONES] = {0, };
+	unsigned long   max_zone_pfn[MAX_NR_ZONES] = {0, };
 	unsigned long	dma_local_pfn;
 
 	/*
@@ -215,19 +214,10 @@ void __init paging_init(void)
 	 */
 	dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
-	for_each_online_node(nid) {
-		unsigned long start_pfn = NODE_DATA(nid)->node_start_pfn;
-		unsigned long end_pfn = start_pfn + NODE_DATA(nid)->node_present_pages;
+	max_zone_pfn[ZONE_DMA] = dma_local_pfn;
+	max_zone_pfn[ZONE_NORMAL] = max_pfn;
 
-		if (dma_local_pfn >= end_pfn - start_pfn)
-			zones_size[ZONE_DMA] = end_pfn - start_pfn;
-		else {
-			zones_size[ZONE_DMA] = dma_local_pfn;
-			zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn;
-		}
-		node_set_state(nid, N_NORMAL_MEMORY);
-		free_area_init_node(nid, zones_size, start_pfn, NULL);
-	}
+	free_area_init(max_zone_pfn);
 
 	/* Initialize the kernel's ZERO_PGE. */
 	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index ff306246d0f8..471ef22216c4 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -6,6 +6,7 @@
 config ARC
 	def_bool y
 	select ARC_TIMERS
+	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SETUP_DMA_OPS
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index 0974226fab55..aa000075a575 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -65,6 +65,7 @@ CONFIG_DRM_UDL=y
 CONFIG_DRM_ETNAVIV=y
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/arch/arc/include/asm/bug.h b/arch/arc/include/asm/bug.h
index 0be19fd1a412..4c453ba96c51 100644
--- a/arch/arc/include/asm/bug.h
+++ b/arch/arc/include/asm/bug.h
@@ -13,7 +13,8 @@
 struct task_struct;
 
 void show_regs(struct pt_regs *regs);
-void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs);
+void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs,
+		     const char *loglvl);
 void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
 			    unsigned long address);
 void die(const char *str, struct pt_regs *regs, unsigned long address);
diff --git a/arch/arc/include/asm/dsp-impl.h b/arch/arc/include/asm/dsp-impl.h
index e1aa212ca6eb..cd5636dfeb6f 100644
--- a/arch/arc/include/asm/dsp-impl.h
+++ b/arch/arc/include/asm/dsp-impl.h
@@ -15,12 +15,14 @@
 
 /* clobbers r5 register */
 .macro DSP_EARLY_INIT
+#ifdef CONFIG_ISA_ARCV2
 	lr	r5, [ARC_AUX_DSP_BUILD]
 	bmsk	r5, r5, 7
 	breq    r5, 0, 1f
 	mov	r5, DSP_CTRL_DISABLED_ALL
 	sr	r5, [ARC_AUX_DSP_CTRL]
 1:
+#endif
 .endm
 
 /* clobbers r10, r11 registers pair */
diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
index ae0aa5323be1..0ff4c0610561 100644
--- a/arch/arc/include/asm/entry-arcv2.h
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -233,6 +233,8 @@
 
 #ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
 	__RESTORE_REGFILE_HARD
+
+	; SP points to PC/STAT32: hw restores them despite NO_AUTOSAVE
 	add	sp, sp, SZ_PT_REGS - 8
 #else
 	add	sp, sp, PT_r0
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
index 30ac40fed2c5..4eef17c5c1da 100644
--- a/arch/arc/include/asm/hugepage.h
+++ b/arch/arc/include/asm/hugepage.h
@@ -26,7 +26,7 @@ static inline pmd_t pte_pmd(pte_t pte)
 #define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
 #define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
 #define pmd_mkhuge(pmd)		pte_pmd(pte_mkhuge(pmd_pte(pmd)))
-#define pmd_mknotpresent(pmd)	pte_pmd(pte_mknotpresent(pmd_pte(pmd)))
+#define pmd_mkinvalid(pmd)	pte_pmd(pte_mknotpresent(pmd_pte(pmd)))
 #define pmd_mkclean(pmd)	pte_pmd(pte_mkclean(pmd_pte(pmd)))
 
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index 75539670431a..8c4fc4b54c14 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -3,9 +3,6 @@
 # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
 #
 
-# Pass UTS_MACHINE for user_regset definition
-CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
-
 obj-y	:= arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
 obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
 obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c
index d5f3fcf273b5..f49a054a1016 100644
--- a/arch/arc/kernel/ptrace.c
+++ b/arch/arc/kernel/ptrace.c
@@ -253,7 +253,7 @@ static const struct user_regset arc_regsets[] = {
 };
 
 static const struct user_regset_view user_arc_view = {
-	.name		= UTS_MACHINE,
+	.name		= "arc",
 	.e_machine	= EM_ARC_INUSE,
 	.regsets	= arc_regsets,
 	.n		= ARRAY_SIZE(arc_regsets)
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index b2b1cb645d9e..dad8a656a2f1 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -11,6 +11,7 @@
 #include <linux/clocksource.h>
 #include <linux/console.h>
 #include <linux/module.h>
+#include <linux/sizes.h>
 #include <linux/cpu.h>
 #include <linux/of_clk.h>
 #include <linux/of_fdt.h>
@@ -424,12 +425,12 @@ static void arc_chk_core_config(void)
 	if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
 		panic("Linux built with incorrect DCCM Base address\n");
 
-	if (CONFIG_ARC_DCCM_SZ != cpu->dccm.sz)
+	if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz)
 		panic("Linux built with incorrect DCCM Size\n");
 #endif
 
 #ifdef CONFIG_ARC_HAS_ICCM
-	if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz)
+	if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz)
 		panic("Linux built with incorrect ICCM Size\n");
 #endif
 
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index 1e440bbfa876..feba91c9d969 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -158,9 +158,11 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 /* Call-back which plugs into unwinding core to dump the stack in
  * case of panic/OOPs/BUG etc
  */
-static int __print_sym(unsigned int address, void *unused)
+static int __print_sym(unsigned int address, void *arg)
 {
-	printk("  %pS\n", (void *)address);
+	const char *loglvl = arg;
+
+	printk("%s  %pS\n", loglvl, (void *)address);
 	return 0;
 }
 
@@ -217,17 +219,18 @@ static int __get_first_nonsched(unsigned int address, void *unused)
  *-------------------------------------------------------------------------
  */
 
-noinline void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs)
+noinline void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs,
+			      const char *loglvl)
 {
-	pr_info("\nStack Trace:\n");
-	arc_unwind_core(tsk, regs, __print_sym, NULL);
+	printk("%s\nStack Trace:\n", loglvl);
+	arc_unwind_core(tsk, regs, __print_sym, (void *)loglvl);
 }
 EXPORT_SYMBOL(show_stacktrace);
 
 /* Expected by sched Code */
-void show_stack(struct task_struct *tsk, unsigned long *sp)
+void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 {
-	show_stacktrace(tsk, NULL);
+	show_stacktrace(tsk, NULL, loglvl);
 }
 
 /* Another API expected by schedular, shows up in "ps" as Wait Channel
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
index d2999503fb8a..660681101523 100644
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@@ -242,5 +242,5 @@ void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
 
 	/* Show stack trace if this Fatality happened in kernel mode */
 	if (!user_mode(regs))
-		show_stacktrace(current, regs);
+		show_stacktrace(current, regs, KERN_DEFAULT);
 }
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index 27ea64b1fa33..f87758a6851b 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -1178,11 +1178,9 @@ int arc_unwind(struct unwind_frame_info *frame)
 #endif
 
 	/* update frame */
-#ifndef CONFIG_AS_CFI_SIGNAL_FRAME
 	if (frame->call_frame
 	    && !UNW_DEFAULT_RA(state.regs[retAddrReg], state.dataAlign))
 		frame->call_frame = 0;
-#endif
 	cfa = FRAME_REG(state.cfa.reg, unsigned long) + state.cfa.offs;
 	startLoc = min_t(unsigned long, UNW_SP(frame), cfa);
 	endLoc = max_t(unsigned long, UNW_SP(frame), cfa);
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index 0920c969c466..41eb9be1653c 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -63,11 +63,13 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 
 		low_mem_sz = size;
 		in_use = 1;
+		memblock_add_node(base, size, 0);
 	} else {
 #ifdef CONFIG_HIGHMEM
 		high_mem_start = base;
 		high_mem_sz = size;
 		in_use = 1;
+		memblock_add_node(base, size, 1);
 #endif
 	}
 
@@ -83,8 +85,7 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
  */
 void __init setup_arch_memory(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES];
-	unsigned long zones_holes[MAX_NR_ZONES];
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
 	init_mm.start_code = (unsigned long)_text;
 	init_mm.end_code = (unsigned long)_etext;
@@ -115,7 +116,6 @@ void __init setup_arch_memory(void)
 	 * the crash
 	 */
 
-	memblock_add_node(low_mem_start, low_mem_sz, 0);
 	memblock_reserve(CONFIG_LINUX_LINK_BASE,
 			 __pa(_end) - CONFIG_LINUX_LINK_BASE);
 
@@ -133,22 +133,7 @@ void __init setup_arch_memory(void)
 	memblock_dump_all();
 
 	/*----------------- node/zones setup --------------------------*/
-	memset(zones_size, 0, sizeof(zones_size));
-	memset(zones_holes, 0, sizeof(zones_holes));
-
-	zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
-	zones_holes[ZONE_NORMAL] = 0;
-
-	/*
-	 * We can't use the helper free_area_init(zones[]) because it uses
-	 * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
-	 * when our kernel doesn't start at PAGE_OFFSET, i.e.
-	 * PAGE_OFFSET != CONFIG_LINUX_RAM_BASE
-	 */
-	free_area_init_node(0,			/* node-id */
-			    zones_size,		/* num pages per zone */
-			    min_low_pfn,	/* first pfn of node */
-			    zones_holes);	/* holes */
+	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
 
 #ifdef CONFIG_HIGHMEM
 	/*
@@ -168,20 +153,13 @@ void __init setup_arch_memory(void)
 	min_high_pfn = PFN_DOWN(high_mem_start);
 	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
 
-	zones_size[ZONE_NORMAL] = 0;
-	zones_holes[ZONE_NORMAL] = 0;
-
-	zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
-	zones_holes[ZONE_HIGHMEM] = 0;
-
-	free_area_init_node(1,			/* node-id */
-			    zones_size,		/* num pages per zone */
-			    min_high_pfn,	/* first pfn of node */
-			    zones_holes);	/* holes */
+	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
 	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
 	kmap_init();
 #endif
+
+	free_area_init(max_zone_pfn);
 }
 
 /*
diff --git a/arch/arc/plat-eznps/Kconfig b/arch/arc/plat-eznps/Kconfig
index a931d0a256d0..a645bca5899a 100644
--- a/arch/arc/plat-eznps/Kconfig
+++ b/arch/arc/plat-eznps/Kconfig
@@ -6,6 +6,7 @@
 
 menuconfig ARC_PLAT_EZNPS
 	bool "\"EZchip\" ARC dev platform"
+	depends on ISA_ARCOMPACT
 	select CPU_BIG_ENDIAN
 	select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
 	select EZNPS_GIC
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 66a04f6f4775..2ef6eb814e5a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -698,6 +698,8 @@ source "arch/arm/mach-qcom/Kconfig"
 
 source "arch/arm/mach-rda/Kconfig"
 
+source "arch/arm/mach-realtek/Kconfig"
+
 source "arch/arm/mach-realview/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
@@ -1954,7 +1956,7 @@ config EFI
 	select UCS2_STRING
 	select EFI_PARAMS_FROM_FDT
 	select EFI_STUB
-	select EFI_ARMSTUB
+	select EFI_GENERIC_STUB
 	select EFI_RUNTIME_WRAPPERS
 	---help---
 	  This option provides support for runtime services provided
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7d5cd0f85461..0fb6de83dd50 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -148,6 +148,8 @@ head-y		:= arch/arm/kernel/head$(MMUEXT).o
 textofs-y	:= 0x00008000
 # We don't want the htc bootloader to corrupt kernel during resume
 textofs-$(CONFIG_PM_H1940)      := 0x00108000
+# RTD1195 has Boot ROM at start of address space
+textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
@@ -208,6 +210,7 @@ machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
 machine-$(CONFIG_ARCH_RDA)		+= rda
+machine-$(CONFIG_ARCH_REALTEK)		+= realtek
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index db05c6ef3e31..60606b0f378d 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -7,12 +7,3 @@ hyp-stub.S
 piggy_data
 vmlinux
 vmlinux.lds
-
-# borrowed libfdt files
-fdt.c
-fdt.h
-fdt_ro.c
-fdt_rw.c
-fdt_wip.c
-libfdt.h
-libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 9c11e7490292..c873d3882375 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -76,29 +76,33 @@ compress-$(CONFIG_KERNEL_LZMA) = lzma
 compress-$(CONFIG_KERNEL_XZ)   = xzkern
 compress-$(CONFIG_KERNEL_LZ4)  = lz4
 
-# Borrowed libfdt files for the ATAG compatibility mode
-
-libfdt		:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
-libfdt_hdrs	:= fdt.h libfdt.h libfdt_internal.h
-
-libfdt_objs	:= $(addsuffix .o, $(basename $(libfdt)))
-
-$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
-	$(call cmd,shipped)
-
-$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
-	$(addprefix $(obj)/,$(libfdt_hdrs))
+libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
+ifeq ($(CONFIG_USE_OF),y)
+OBJS	+= $(libfdt_objs) fdt_get_mem_start.o
+endif
+
+# -fstack-protector-strong triggers protection checks in this code,
+# but it is being used too early to link to meaningful stack_chk logic.
+nossp-flags-$(CONFIG_CC_HAS_STACKPROTECTOR_NONE) := -fno-stack-protector
+$(foreach o, $(libfdt_objs) atags_to_fdt.o fdt_get_mem_start.o, \
+	$(eval CFLAGS_$(o) := -I $(srctree)/scripts/dtc/libfdt $(nossp-flags-y)))
+
+# These were previously generated C files. When you are building the kernel
+# with O=, make sure to remove the stale files in the output tree. Otherwise,
+# the build system wrongly compiles the stale ones.
+ifdef building_out_of_srctree
+$(shell rm -f $(addprefix $(obj)/, fdt_rw.c fdt_ro.c fdt_wip.c fdt.c))
+endif
 
 targets       := vmlinux vmlinux.lds piggy_data piggy.o \
 		 lib1funcs.o ashldi3.o bswapsdi2.o \
 		 head.o $(OBJS)
 
-clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \
-		$(libfdt) $(libfdt_hdrs) hyp-stub.S
+clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S hyp-stub.S
 
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
@@ -107,15 +111,6 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
-# -fstack-protector-strong triggers protection checks in this code,
-# but it is being used too early to link to meaningful stack_chk logic.
-nossp-flags-$(CONFIG_CC_HAS_STACKPROTECTOR_NONE) := -fno-stack-protector
-CFLAGS_atags_to_fdt.o := $(nossp-flags-y)
-CFLAGS_fdt.o := $(nossp-flags-y)
-CFLAGS_fdt_ro.o := $(nossp-flags-y)
-CFLAGS_fdt_rw.o := $(nossp-flags-y)
-CFLAGS_fdt_wip.o := $(nossp-flags-y)
-
 ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
 	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
 asflags-y := -DZIMAGE
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 64c49747f8a3..8452753efebe 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <linux/libfdt_env.h>
 #include <asm/setup.h>
 #include <libfdt.h>
 
diff --git a/arch/arm/boot/compressed/fdt.c b/arch/arm/boot/compressed/fdt.c
new file mode 100644
index 000000000000..f8ea7a201ab1
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt.c"
diff --git a/arch/arm/boot/compressed/fdt_get_mem_start.c b/arch/arm/boot/compressed/fdt_get_mem_start.c
new file mode 100644
index 000000000000..ae71fde731b8
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_get_mem_start.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/sizes.h>
+
+static const void *getprop(const void *fdt, const char *node_path,
+			   const char *property)
+{
+	int offset = fdt_path_offset(fdt, node_path);
+
+	if (offset == -FDT_ERR_NOTFOUND)
+		return NULL;
+
+	return fdt_getprop(fdt, offset, property, NULL);
+}
+
+static uint32_t get_addr_size(const void *fdt)
+{
+	const __be32 *addr_len = getprop(fdt, "/", "#address-cells");
+
+	if (!addr_len) {
+		/* default */
+		return 1;
+	}
+
+	return fdt32_to_cpu(*addr_len);
+}
+
+/*
+ * Get the start of physical memory
+ */
+
+unsigned long fdt_get_mem_start(const void *fdt)
+{
+	uint32_t addr_size, mem_start;
+	const __be32 *memory;
+
+	if (!fdt)
+		return -1;
+
+	if (*(__be32 *)fdt != cpu_to_fdt32(FDT_MAGIC))
+		return -1;
+
+	/* Find the first memory node */
+	memory = getprop(fdt, "/memory", "reg");
+	if (!memory)
+		return -1;
+
+	/* There may be multiple cells on LPAE platforms */
+	addr_size = get_addr_size(fdt);
+
+	mem_start = fdt32_to_cpu(memory[addr_size - 1]);
+	/* Must be a multiple of 16 MiB for phys/virt patching */
+	return round_up(mem_start, SZ_16M);
+}
diff --git a/arch/arm/boot/compressed/fdt_ro.c b/arch/arm/boot/compressed/fdt_ro.c
new file mode 100644
index 000000000000..93970a4ad5ae
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_ro.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_ro.c"
diff --git a/arch/arm/boot/compressed/fdt_rw.c b/arch/arm/boot/compressed/fdt_rw.c
new file mode 100644
index 000000000000..f7c6b8b7e01c
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_rw.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_rw.c"
diff --git a/arch/arm/boot/compressed/fdt_wip.c b/arch/arm/boot/compressed/fdt_wip.c
new file mode 100644
index 000000000000..048d2c7a088d
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_wip.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_wip.c"
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index e8e1c866e413..1d7c86624b3e 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -254,8 +254,58 @@ not_angel:
 		.text
 
 #ifdef CONFIG_AUTO_ZRELADDR
+#ifdef CONFIG_USE_OF
 		/*
-		 * Find the start of physical memory.  As we are executing
+		 * Find the start of physical memory.
+		 * Try the DTB first, if available.
+		 */
+		adr	r0, LC0
+		ldr	r1, [r0]	@ get absolute LC0
+		ldr	sp, [r0, #24]	@ get stack location
+		sub	r1, r0, r1	@ compute relocation offset
+		add	sp, sp, r1	@ apply relocation
+
+#ifdef CONFIG_ARM_APPENDED_DTB
+		/*
+		 * Look for an appended DTB. If found, use it and
+		 * move stack away from it.
+		 */
+		ldr	r6, [r0, #12]	@ get &_edata
+		add	r6, r6, r1	@ relocate it
+		ldmia	r6, {r0, r5}	@ get DTB signature and size
+#ifndef __ARMEB__
+		ldr	r1, =0xedfe0dd0	@ sig is 0xd00dfeed big endian
+		/* convert DTB size to little endian */
+		eor	r2, r5, r5, ror #16
+		bic	r2, r2, #0x00ff0000
+		mov	r5, r5, ror #8
+		eor	r5, r5, r2, lsr #8
+#else
+		ldr	r1, =0xd00dfeed
+#endif
+		cmp	r0, r1		@ do we have a DTB there?
+		bne	1f
+
+		/* preserve 64-bit alignment */
+		add	r5, r5, #7
+		bic	r5, r5, #7
+		add	sp, sp, r5	@ if so, move stack above DTB
+		mov	r0, r6		@ and extract memory start from DTB
+		b	2f
+
+1:
+#endif /* CONFIG_ARM_APPENDED_DTB */
+
+		mov	r0, r8
+2:
+		bl	fdt_get_mem_start
+		mov	r4, r0
+		cmp	r0, #-1
+		bne	1f
+#endif /* CONFIG_USE_OF */
+
+		/*
+		 * Fall back to the traditional method.  As we are executing
 		 * without the MMU on, we are in the physical address space.
 		 * We just need to get rid of any offset by aligning the
 		 * address.
@@ -273,6 +323,8 @@ not_angel:
 		 */
 		mov	r4, pc
 		and	r4, r4, #0xf8000000
+
+1:
 		/* Determine final kernel image address. */
 		add	r4, r4, #TEXT_OFFSET
 #else
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
deleted file mode 100644
index 6a0f1f524466..000000000000
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ARM_LIBFDT_ENV_H
-#define _ARM_LIBFDT_ENV_H
-
-#include <linux/limits.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-
-#define INT32_MAX	S32_MAX
-#define UINT32_MAX	U32_MAX
-
-typedef __be16 fdt16_t;
-typedef __be32 fdt32_t;
-typedef __be64 fdt64_t;
-
-#define fdt16_to_cpu(x)		be16_to_cpu(x)
-#define cpu_to_fdt16(x)		cpu_to_be16(x)
-#define fdt32_to_cpu(x)		be32_to_cpu(x)
-#define cpu_to_fdt32(x)		cpu_to_be32(x)
-#define fdt64_to_cpu(x)		be64_to_cpu(x)
-#define cpu_to_fdt64(x)		cpu_to_be64(x)
-
-#endif
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index b247f399de71..116bd7aace6a 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -42,7 +42,7 @@ SECTIONS
   }
   .table : ALIGN(4) {
     _table_start = .;
-    LONG(ZIMAGE_MAGIC(2))
+    LONG(ZIMAGE_MAGIC(4))
     LONG(ZIMAGE_MAGIC(0x5a534c4b))
     LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
     LONG(ZIMAGE_MAGIC(_kernel_bss_size))
@@ -78,7 +78,7 @@ SECTIONS
      * The EFI stub always executes from RAM, and runs strictly before the
      * decompressor, so we can make an exception for its r/w data, and keep it
      */
-    *(.data.efistub)
+    *(.data.efistub .bss.efistub)
     __pecoff_data_end = .;
 
     /*
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e8dd99201397..b9eff9be935e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -181,6 +181,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-monk.dtb \
 	exynos3250-rinato.dtb
 dtb-$(CONFIG_ARCH_EXYNOS4) += \
+	exynos4210-i9100.dtb \
 	exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
@@ -412,6 +413,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-aristainetos2_4.dtb \
 	imx6dl-aristainetos2_7.dtb \
 	imx6dl-colibri-eval-v3.dtb \
+	imx6dl-colibri-v1_1-eval-v3.dtb \
 	imx6dl-cubox-i.dtb \
 	imx6dl-cubox-i-emmc-som-v15.dtb \
 	imx6dl-cubox-i-som-v15.dtb \
@@ -832,6 +834,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
 	am57xx-beagle-x15-revc.dtb \
+	am5729-beagleboneai.dtb \
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
 	am572x-idk.dtb \
@@ -896,6 +899,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 dtb-$(CONFIG_ARCH_RDA) += \
 	rda8810pl-orangepi-2g-iot.dtb \
 	rda8810pl-orangepi-i96.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += \
+	rtd1195-horseradish.dtb \
+	rtd1195-mele-x1000.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
 	arm-realview-pb11mp.dtb \
@@ -1110,6 +1116,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-olimex-som204-evb.dtb \
 	sun7i-a20-olimex-som204-evb-emmc.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
 	sun7i-a20-olinuxino-lime2-emmc.dtb \
 	sun7i-a20-olinuxino-micro.dtb \
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
new file mode 100644
index 000000000000..9877d7709d41
--- /dev/null
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -0,0 +1,731 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+/ {
+	model = "BeagleBoard.org BeagleBone AI";
+	compatible = "beagle,am5729-beagleboneai", "ti,am5728",
+		     "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+		display0 = &hdmi_conn;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+
+	};
+
+	vdd_adc: gpioregulator-vdd_adc {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd_adc";
+		vin-supply = <&vdd_5v>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0
+			3300000 1>;
+	};
+
+	vdd_5v: fixedregulator-vdd_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&vdd_ddr>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr4";
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+			default-state = "off";
+		};
+	};
+
+	hdmi_conn: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_encoder_out>;
+			};
+		};
+	};
+
+	hdmi_enc: encoder@0 {
+		/* "ti,tpd12s016" software compatible with "ti,tpd12s015"
+		 *  no need for individual driver
+		 */
+		compatible = "ti,tpd12s015";
+		gpios = <0>,
+			<0>,
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			port@0 {
+				reg = <0x0>;
+
+				hdmi_encoder_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <0x1>;
+
+				hdmi_encoder_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+	};
+
+	brcmf_pwrseq: brcmf_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>,	/* BT-REG-ON */
+				<&gpio3 18 GPIO_ACTIVE_LOW>;	/* WL-REG-ON */
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		ti,enable-id-detection;
+		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			smps12-in-supply = <&vdd_5v>;
+			smps3-in-supply = <&vdd_5v>;
+			smps45-in-supply = <&vdd_5v>;
+			smps6-in-supply = <&vdd_5v>;
+			smps7-in-supply = <&vdd_5v>;
+			mps3-in-supply = <&vdd_5v>;
+			smps8-in-supply = <&vdd_5v>;
+			smps9-in-supply = <&vdd_5v>;
+			ldo1-in-supply = <&vdd_5v>;
+			ldo2-in-supply = <&vdd_5v>;
+			ldo3-in-supply = <&vdd_5v>;
+			ldo4-in-supply = <&vdd_5v>;
+			ldo9-in-supply = <&vdd_5v>;
+			ldoln-in-supply = <&vdd_5v>;
+			ldousb-in-supply = <&vdd_5v>;
+			ldortc-in-supply = <&vdd_5v>;
+
+			regulators {
+				vdd_mpu: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_ddr: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_dspeve: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_gpu: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_core: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = < 850000>;	/*** 1.15V */
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_iva: smps8 {
+					/* VDD_IVAHD */				/*** 1.06V */
+					regulator-name = "smps8";
+				};
+
+				vdd_3v3: smps9 {
+					/* VDD_3V3 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_sd: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_1v8: ldo2 {
+					/* VDDSH18V */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo3: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo4: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				vdd_rtc: ldo9 {
+					/* VDD_RTC  */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = < 840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_pll: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio2>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		st,mod-12b = <1>; /* 12-bit ADC */
+		st,ref-sel = <0>; /* internal ADC reference */
+		st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
+		st,sample-time = <4>; /* ADC converstion time: 80 clocks */
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
+			adc0: iio-device@0 {
+				#io-channel-cells = <1>;
+				iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
+				iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
+					"AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
+			};
+		};
+
+		stmpe_touchscreen {
+			status = "disabled";
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_gpio {
+			compatible = "st,stmpe-gpio";
+		};
+
+		stmpe_pwm {
+			compatible = "st,stmpe-pwm";
+			#pwm-cells = <2>;
+		};
+	};
+};
+
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&vdd_mpu>;
+	voltage-tolerance = <1>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&davinci_mdio {
+	reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;
+
+	phy0: ethernet-phy@1 {
+		reg = <4>;
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&mac {
+	slaves = <1>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii";
+};
+
+&ocp {
+	pruss1_shmem: pruss_shmem@4b200000 {
+		status = "okay";
+		compatible = "ti,pruss-shmem";
+		reg = <0x4b200000 0x020000>;
+	};
+
+	pruss2_shmem: pruss_shmem@4b280000 {
+		status = "okay";
+		compatible = "ti,pruss-shmem";
+		reg = <0x4b280000 0x020000>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_sd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vdd_1v8>;
+	vqmmc-supply = <&vdd_1v8>;
+	bus-width = <8>;
+	ti,non-removable;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	ti,needs-special-reset;
+	dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
+	dma-names = "tx", "rx";
+
+};
+
+&mmc4 {
+	/* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
+	/* HS: High speed up to 50 MHz (3.3 V signaling). */
+	/* SDR12: SDR up to 25 MHz (1.8 V signaling). */
+	/* SDR25: SDR up to 50 MHz (1.8 V signaling). */
+	/* SDR50: SDR up to 100 MHz (1.8 V signaling). */
+	/* SDR104: SDR up to 208 MHz (1.8 V signaling) */
+	/* DDR50: DDR up to 50 MHz (1.8 V signaling). */
+	status = "okay";
+
+	ti,needs-special-reset;
+	vmmc-supply = <&vdd_3v3>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	bus-width = <4>;
+	ti,non-removable;
+	non-removable;
+	no-1-8-v;
+	max-frequency = <24000000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmc-pwrseq = <&brcmf_pwrseq>;
+
+	brcmf: wifi@1 {
+		status = "okay";
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		brcm,sd-head-align = <4>;
+		brcm,sd_head_align = <4>;
+		brcm,sd_sgentry_align = <512>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&dss {
+	status = "okay";
+	vdda_video-supply = <&vdd_1v8_pll>;
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&vdd_1v8_phy_ldo4>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_encoder_in>;
+		};
+	};
+};
+
+&bandgap {
+	status = "okay";
+};
+
+&mailbox1 {
+	status = "okay";
+};
+
+&mailbox2 {
+	status = "okay";
+};
+
+&mailbox3 {
+	status = "okay";
+};
+
+&mailbox4 {
+	status = "okay";
+};
+
+&mailbox5 {
+	status = "okay";
+};
+
+&mailbox6 {
+	status = "okay";
+};
+
+&mailbox7 {
+	status = "okay";
+};
+
+&mailbox8 {
+	status = "okay";
+};
+
+&mailbox9 {
+	status = "okay";
+};
+
+&mailbox10 {
+	status = "okay";
+};
+
+&mailbox11 {
+	status = "okay";
+};
+
+&mailbox12 {
+	status = "okay";
+};
+
+&mailbox13 {
+	status = "okay";
+};
+
+&cpu_alert0 {
+	temperature = <55000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&sata {
+	status = "disabled";
+};
+
+&sata_phy {
+	status = "disabled";
+};
+
+/* bluetooth */
+&uart6 {
+	status = "okay";
+};
+
+/* cape header stuff */
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cpu0_opp_table {
+	opp_slow-500000000 {
+		opp-shared;
+	};
+};
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index fa0088025b2c..85c95cc551dd 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -40,3 +40,7 @@ &mac {
 	status = "okay";
 	dual_emac;
 };
+
+&m_can0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index aa5e55f98179..8ec71342f289 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -35,6 +35,16 @@ v3_3d: fixedregulator-v3_3d {
 		regulator-boot-on;
 	};
 
+	v1_2d: fixedregulator-v1_2d {
+		compatible = "regulator-fixed";
+		regulator-name = "V1_2D";
+		vin-supply = <&vmain>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		/* TPS51200 */
 		compatible = "regulator-fixed";
@@ -139,6 +149,12 @@ tpd12s015_out: endpoint@0 {
 			};
 		};
 	};
+
+	src_clk_x1: src_clk_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
 };
 
 &dra7_pmx_core {
@@ -378,6 +394,32 @@ tpic2810: tpic2810@60 {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	dsi_bridge: tc358778@e {
+		compatible = "toshiba,tc358778", "toshiba,tc358768";
+		reg = <0xe>;
+		status = "disabled";
+
+		clocks = <&src_clk_x1>;
+		clock-names = "refclk";
+
+		vddc-supply = <&v1_2d>;
+		vddmipi-supply = <&v1_2d>;
+		vddio-supply = <&v3_3d>;
+
+		dsi_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				rgb_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+					data-lines = <24>;
+				};
+			};
+		};
+	};
 };
 
 &mcspi3 {
@@ -543,4 +585,20 @@ hdmi_out: endpoint {
 
 &dss {
 	status = "okay";
+
+	vdda_video-supply = <&ldoln_reg>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dpi_out: endpoint {
+				remote-endpoint = <&rgb_in>;
+				data-lines = <24>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index 5d7cbd9164d4..6b88c7f26bf7 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -5,6 +5,7 @@
 
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
 
 / {
 	model = "Facebook TiogaPass BMC";
@@ -121,6 +122,69 @@ &kcs3 {
 	kcs_addr = <0xca2>;
 };
 
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"BMC_CPLD_FPGA_SEL","","","","","","","",
+	/*B0-B7*/	"","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
+			"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
+			"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
+			"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON",
+			"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
+			"CPU1_PROCHOT_LVT3_ BMC",
+	/*F0-F7*/	"IRQ_PVDDQ_ABC_VRHOT_LVT3","",
+			"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
+			"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
+	/*G0-G7*/	"CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
+			"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
+	/*H0-H7*/	"LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
+			"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
+			"LED_POST_CODE_6","LED_POST_CODE_7",
+	/*I0-I7*/	"CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
+			"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
+			"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
+	/*M0-M7*/	"CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
+			"CPU0_THERMTRIP_LATCH_LVT3",
+			"CPU1_THERMTRIP_LATCH_LVT3","","",
+	/*N0-N7*/	"","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
+			"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
+			"BMC_PWR_DEBUG","RST_RSMRST",
+	/*Q0-Q7*/	"","","","","UARTSW_LSB","UARTSW_MSB",
+			"POST_CARD_PRES_BMC","PE_BMC_WAKE",
+	/*R0-R7*/	"","","BMC_TCK_MUX_SEL","BMC_PRDY",
+			"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
+			"SLT_CFG1",
+	/*S0-S7*/	"THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
+			"","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","BMC_FAULT","","",
+	/*V0-V7*/	"","","","FAST_PROCHOT_EN","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","GLOBAL_RST_WARN",
+			"CPU0_MEMABC_MEMHOT_LVT3_BMC",
+			"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
+			"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
+			"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
+			"","","",
+	/*Z0-Z7*/	"","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
+			"","","","",
+	/*AA0-AA7*/	"CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
+			"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
+			"","POST_COMPLETE",
+	/*AB0-AB7*/	"IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &mac0 {
 	status = "okay";
 
@@ -368,6 +432,11 @@ &i2c3 {
 &i2c4 {
 	status = "okay";
 	// BMC Debug Header
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
 };
 
 &i2c5 {
@@ -449,6 +518,11 @@ tmp421@1f {
 &i2c9 {
 	status = "okay";
 	//USB Debug Connector
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
 };
 
 &pwm_tacho {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 000000000000..e16a42fbf41e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2018 Facebook Inc.
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+/ {
+	model = "Facebook Yosemitev2 BMC";
+	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		// Voltage sensor
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
+		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
+		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	mlx,multi-host;
+	use-ncsi;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c8 {
+	//FRU EEPROM
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c9 {
+	// Inlet and outlet temp
+	status = "okay";
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	// HSC
+	status = "okay";
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c11 {
+	// MEZZ_TEMP_SENSOR
+	status = "okay";
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+};
+
+&i2c12 {
+	// MEZZ_FRU
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&pwm_tacho {
+	// FSC
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6232cd726a7f..521b6e3d24cb 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -4,6 +4,7 @@
 
 #include "aspeed-g6.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
 
 / {
 	model = "Rainier";
@@ -269,66 +270,82 @@ pca0: pca9552@61 {
 
 		gpio@0 {
 			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@1 {
 			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@2 {
 			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@3 {
 			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@4 {
 			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@5 {
 			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@6 {
 			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@7 {
 			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@8 {
 			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@9 {
 			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@10 {
 			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@11 {
 			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@12 {
 			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@13 {
 			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@14 {
 			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@15 {
 			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 	};
 
@@ -540,6 +557,10 @@ &vuart1 {
 	status = "okay";
 };
 
+&vuart2 {
+	status = "okay";
+};
+
 &lpc_ctrl {
 	status = "okay";
 	memory-region = <&flash_memory>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index ff49ec76fa7c..47293a5e0c59 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -132,6 +132,10 @@ &mac2 {
 	use-ncsi;
 };
 
+&emmc_controller {
+	status = "okay";
+};
+
 &emmc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 421aa600148b..a0f99e34ac8e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -191,6 +191,40 @@ iio-hwmon-bmp280 {
 
 };
 
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","air-water","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"fsi-data","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"presence-ps1","","led-rear-fault","led-rear-power",
+		        "led-rear-id","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","presence-ps0",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","power-button","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &fmc {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 8e04303e8514..82f0213e3a3c 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -219,6 +219,16 @@ sram: sram@1e720000 {
 				reg = <0x1e720000 0x8000>;	// 32K
 			};
 
+			video: video@1e700000 {
+				compatible = "aspeed,ast2400-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
 			sdmmc: sd-controller@1e740000 {
 				compatible = "aspeed,ast2400-sd-controller";
 				reg = <0x1e740000 0x100>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index f12ec04d3cbc..284face7de2c 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -224,6 +224,14 @@ syscon: syscon@1e6e2000 {
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 
+				scu_ic: interrupt-controller@18 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2500-scu-ic";
+					reg = <0x18 0x4>;
+					interrupts = <21>;
+					interrupt-controller;
+				};
+
 				p2a: p2a-control@2c {
 					compatible = "aspeed,ast2500-p2a-ctrl";
 					reg = <0x2c 0x4>;
@@ -254,6 +262,17 @@ gfx: display@1e6e6000 {
 				interrupts = <0x19>;
 			};
 
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2500-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_XDMA>;
+				interrupts-extended = <&vic 6>, <&scu_ic 2>;
+				pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
 			adc: adc@1e6e9000 {
 				compatible = "aspeed,ast2500-adc";
 				reg = <0x1e6e9000 0xb0>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 0a29b3b57a9d..1ffc15177b79 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -313,6 +313,22 @@ smp-memram@180 {
 					compatible = "aspeed,ast2600-smpmem";
 					reg = <0x180 0x40>;
 				};
+
+				scu_ic0: interrupt-controller@560 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic0";
+					reg = <0x560 0x4>;
+					interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+
+				scu_ic1: interrupt-controller@570 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic1";
+					reg = <0x570 0x4>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
 			};
 
 			rng: hwrng@1e6e2524 {
@@ -322,6 +338,28 @@ rng: hwrng@1e6e2524 {
 				quality = <100>;
 			};
 
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2600-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_DEV_XDMA>;
+				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+						      <&scu_ic0 2>;
+				pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index e26ea9006378..c7f1d97e69bb 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -56,6 +56,16 @@ sd_io_1v8_reg: sd_io_1v8_reg {
 			  3300000 0x0>;
 		status = "okay";
 	};
+
+	sd_vcc_reg: sd_vcc_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &firmware {
@@ -69,7 +79,7 @@ expgpio: gpio {
 				  "GLOBAL_RESET",
 				  "VDD_SD_IO_SEL",
 				  "CAM_GPIO",
-				  "",
+				  "SD_PWR_ON",
 				  "";
 		status = "okay";
 	};
@@ -174,6 +184,7 @@ brcmf: wifi@1 {
 /* EMMC2 is used to drive the SD card */
 &emmc2 {
 	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
 	broken-cd;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index 2b1d9d4c0cde..4119271c979d 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -130,7 +130,6 @@ v3d: v3d@7ec00000 {
 			compatible = "brcm,bcm2835-v3d";
 			reg = <0x7ec00000 0x1000>;
 			interrupts = <1 10>;
-			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
 		};
 
 		vc4: gpu {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000000..8a55b6cded59
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 53bf4579cc22..0549686134ea 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index 82d6c4662ae4..b390006aef79 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 9e95fee78e19..0199ec98cd61 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -1,5 +1,6 @@
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2837";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 4740989ed9c4..7191ee6a1b82 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -172,6 +172,7 @@ axi@0 {
 			#address-cells = <1>;
 			ranges = <0x51000000 0x51000000 0x3000
 				  0x0	     0x20000000 0x10000000>;
+			dma-ranges;
 			/**
 			 * To enable PCI endpoint mode, disable the pcie1_rc
 			 * node and enable pcie1_ep mode.
@@ -185,7 +186,6 @@ pcie1_rc: pcie@51000000 {
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
-				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -230,6 +230,7 @@ axi@1 {
 			#address-cells = <1>;
 			ranges = <0x51800000 0x51800000 0x3000
 				  0x0	     0x30000000 0x10000000>;
+			dma-ranges;
 			status = "disabled";
 			pcie2_rc: pcie@51800000 {
 				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
@@ -240,7 +241,6 @@ pcie2_rc: pcie@51800000 {
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
-				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index ce50c4dc6f2a..3af1ab4458ef 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -117,6 +117,8 @@ &i2c3 {
 	ricoh619: pmic@32 {
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		system-power-controller;
 
 		regulators {
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 248bd372fe70..ca29d7ed8216 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -57,7 +57,8 @@ vemmc_reg: voltage-regulator-0 {
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 86c26a4edfd7..aba8350cfdaf 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -50,9 +50,15 @@ power_key {
 		};
 	};
 
+	wlan_pwrseq: mshc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+	};
+
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -605,8 +611,6 @@ &jpeg {
 };
 
 &mshc_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	broken-cd;
 	non-removable;
 	cap-mmc-highspeed;
@@ -625,10 +629,48 @@ &mshc_0 {
 	status = "okay";
 };
 
+&mshc_1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+	bus-width = <4>;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4334-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	assigned-clocks = <&cmu CLK_SCLK_UART0>;
 	assigned-clock-rates = <100000000>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
+	};
 };
 
 &serial_1 {
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
new file mode 100644
index 000000000000..6d0c04d77a39
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -0,0 +1,768 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com>
+ * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net>
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy S2 (GT-I9100)";
+	compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	vemmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tsp_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	cam_af_28v_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_AF_2.8V_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_en_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_IO_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_12v_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_1.2V_EN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vt_core_15v_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VT_CORE_1.5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-down {
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		vol-up {
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		ok {
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_OK>;
+			label = "ok";
+			debounce-interval = <10>;
+		};
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	i2c_max17042_fuel: i2c-gpio {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+
+		battery@36 {
+			compatible = "maxim,max17042";
+
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-0 = <&max17042_fuel_irq>;
+			pinctrl-names = "default";
+
+			reg = <0x36>;
+			maxim,over-heat-temp = <700>;
+			maxim,over-volt = <4500>;
+		};
+	};
+
+	spi-lcd {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+
+			spi-max-frequency = <1200000>;
+
+			vdd3-supply = <&vmipi_reg>;
+			vci-supply = <&vcclcd_reg>;
+
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+
+			panel-width-mm = <90>;
+			panel-height-mm = <154>;
+
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 800MHz */
+					cooling-device = <&cpu0 2 2>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 4 4>;
+				};
+			};
+		};
+	};
+};
+
+&camera {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&varm_breg>;
+};
+
+&ehci {
+	status = "okay";
+
+	phys = <&exynos_usbphy 1>;
+	phy-names = "host";
+};
+
+&exynos_usbphy {
+	status = "okay";
+
+	vbus-supply = <&safe1_sreg>;
+};
+
+&fimc_0 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,invert-vden;
+	samsung,invert-vclk;
+
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+
+	port@3 {
+		reg = <3>;
+
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	mali-supply = <&vg3d_breg>;
+	regulator-microvolt-offset = <50000>;
+	regulator-microsecs-delay = <50>;
+};
+
+&hsotg {
+	status = "okay";
+
+	dr_mode = "otg";
+	vusb_d-supply = <&vusb_reg>;
+	vusb_a-supply = <&vusbdac_reg>;
+};
+
+&i2c_3 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+
+	mxt224-touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+		reg = <0x66>;
+
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
+
+		max8997,pmic-buck1-uses-gpio-dvs;
+		max8997,pmic-buck2-uses-gpio-dvs;
+		max8997,pmic-buck5-uses-gpio-dvs;
+
+		max8997,pmic-ignore-gpiodvs-side-effect;
+		max8997,pmic-buck125-default-dvs-idx = <0>;
+
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
+						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+						 <950000>,  <900000>,
+						 <1100000>, <1000000>,
+						 <950000>,  <900000>;
+
+		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
+		pinctrl-names = "default";
+
+		regulators {
+			vadc_reg: LDO1 {
+				regulator-name = "VADC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+			};
+			valive_reg: LDO2 {
+				regulator-name = "VALIVE_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+			};
+
+			vusb_reg: LDO3 {
+				regulator-name = "VUSB_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vmipi_reg: LDO4 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vhsic_reg: LDO5 {
+				regulator-name = "VHSIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vpda_reg: LDO6 {
+				regulator-name = "VCC_1.8V_PDA";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: LDO7 {
+				regulator-name = "CAM_ISP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vusbdac_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccpda_reg: LDO9 {
+				regulator-name = "VCC_2.8V_PDA";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vtouch_reg: LDO11 {
+				regulator-name = "TOUCH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vpll_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vtcam_reg: LDO12 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcclcd_reg: LDO13 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vmotor_reg: LDO14 {
+				regulator-name = "VCC_2.8V_MOTOR";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vled_reg: LDO15 {
+				regulator-name = "LED_A_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			camsensor_reg: LDO16 {
+				regulator-name = "CAM_SENSOR_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vtf_reg: LDO17 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vtouchled_reg: LDO18 {
+				regulator-name = "TOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vddq_reg: LDO21 {
+				regulator-name = "VDDQ_M1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			varm_breg: BUCK1 {
+				regulator-name = "VARM_1.2V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vint_breg: BUCK2 {
+				regulator-name = "VINT_1.1V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vg3d_breg: BUCK3 {
+				regulator-name = "G3D_1.1V";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			camisp_breg: BUCK4 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vmem_breg: BUCK5 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vccsub_breg: BUCK7 {
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			safe1_sreg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safe2_sreg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <60000>;
+				regulator-max-microamp = <2580000>;
+				regulator-always-on;
+			};
+
+			chargercv_reg: CHARGER_CV {
+				regulator-name = "CHARGER_CV";
+				regulator-min-microvolt = <3800000>;
+				regulator-max-microvolt = <4100000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_7 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+
+	ak8975@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-states {
+		gpa0-0 {
+			samsung,pins = "gpa0-0";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-1 {
+			samsung,pins = "gpa0-1";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-2 {
+			samsung,pins = "gpa0-2";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-3 {
+			samsung,pins = "gpa0-3";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+	};
+};
+
+&pinctrl_1 {
+	mhl_int: mhl-int {
+		samsung,pins = "gpf3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c_mhl_bus: i2c-mhl-bus {
+		samsung,pins = "gpf0-4", "gpf0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	usb_sel: usb-sel {
+		samsung,pins = "gpl0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_en: bt-en {
+		samsung,pins = "gpl0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_res: bt-res {
+		samsung,pins = "gpl1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	otg_gp: otg-gp {
+		samsung,pins = "gpx3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	mag_mhl_gpio: mag-mhl-gpio {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max8997_irq: max8997-irq {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max17042_fuel_irq: max17042-fuel-irq {
+		samsung,pins = "gpx2-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp224_irq: tsp224-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&sdhci_0 {
+	status = "okay";
+
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vemmc_reg>;
+
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
+	pinctrl-names = "default";
+};
+
+&sdhci_2 {
+	status = "okay";
+
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
+	pinctrl-names = "default";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+
+		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 0d1e1a9c2f6e..890525b10d22 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -251,12 +251,7 @@ ldo21_reg: LDO21 {
 			};
 
 			buck1_reg: BUCK1 {
-				/*
-				* HACK: The real name is VDD_ARM_1.2V,
-				* but exynos-cpufreq does not support
-				* DT-based regulator lookup yet.
-				*/
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM_1.2V";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt	= <1350000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 7c39dd1c4d3a..3d791db6095c 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -121,6 +121,11 @@ ok-key {
 		};
 	};
 
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -280,11 +285,10 @@ &i2c_5 {
 
 	max8997_pmic@66 {
 		compatible = "maxim,max8997-pmic";
-		interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>;
 
 		reg = <0x66>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
 
 		max8997,pmic-buck1-uses-gpio-dvs;
 		max8997,pmic-buck2-uses-gpio-dvs;
@@ -403,12 +407,7 @@ vddq_reg: LDO21 {
 			};
 
 			varm_breg: BUCK1 {
-			     /*
-			      * HACK: The real name is VARM_1.2V_C210,
-			      * but exynos-cpufreq does not support
-			      * DT-based regulator lookup yet.
-			      */
-			     regulator-name = "vdd_arm";
+			     regulator-name = "VARM_1.2V_C210";
 			     regulator-min-microvolt = <900000>;
 			     regulator-max-microvolt = <1350000>;
 			     regulator-always-on;
@@ -471,6 +470,30 @@ &sdhci_2 {
 	status = "okay";
 };
 
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&tflash_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9dda6bdb9253..02fde1a75ebd 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -50,6 +50,11 @@ vemmc_reg: voltage-regulator {
 		enable-active-high;
 	};
 
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -164,7 +169,8 @@ hdmi_en: voltage-regulator-hdmi-5v {
 
 	hdmi_ddc: i2c-ddc {
 		compatible = "i2c-gpio";
-		gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -317,7 +323,7 @@ vdd_arm_reg: pmic@60 {
 		max8952,sync-freq = <0>;
 		max8952,ramp-speed = <0>;
 
-		regulator-name = "vdd_arm";
+		regulator-name = "VARM_1.2V_C210";
 		regulator-min-microvolt = <770000>;
 		regulator-max-microvolt = <1400000>;
 		regulator-always-on;
@@ -563,6 +569,29 @@ &sdhci_2 {
 	status = "okay";
 };
 
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&ldo5_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	status = "okay";
 	/delete-property/dmas;
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 44f97546dd0a..53b3ca3effab 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -53,7 +53,8 @@ ps_als_reg: voltage-regulator-8 {
 
 	i2c_ak8975: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -68,7 +69,8 @@ ak8975@c {
 
 	i2c_cm36651: i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
+		sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 3023bc3b68ce..2c8111c6b065 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -140,7 +140,8 @@ key-ok {
 
 	i2c_max77693: i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -188,7 +189,8 @@ charger {
 
 	i2c_max77693_fuel: i2c-gpio-3 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -228,7 +230,8 @@ touchkey@20 {
 
 	i2c-mhl {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -820,7 +823,7 @@ ldo26_reg: LDO26 {
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
@@ -831,7 +834,7 @@ regulator-state-mem {
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
@@ -842,7 +845,7 @@ regulator-state-mem {
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-always-on;
@@ -853,7 +856,7 @@ regulator-state-mem {
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-boot-on;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 73d6a71da88d..a5c1ce1e396c 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -430,7 +430,7 @@ ldo25_reg: LDO25 {
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
@@ -438,7 +438,7 @@ buck1_reg: BUCK1 {
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
@@ -446,7 +446,7 @@ buck2_reg: BUCK2 {
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-always-on;
@@ -454,7 +454,7 @@ buck3_reg: BUCK3 {
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-microvolt-offset = <50000>;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index ecd14b283a6b..dc865be40751 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -363,7 +363,7 @@ ldo28_reg: LDO28 {
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt	= <1100000>;
 				regulator-always-on;
@@ -372,7 +372,7 @@ buck1_reg: BUCK1 {
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt	= <1350000>;
 				regulator-always-on;
@@ -381,7 +381,7 @@ buck2_reg: BUCK2 {
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt	= <1200000>;
 				regulator-always-on;
@@ -390,7 +390,7 @@ buck3_reg: BUCK3 {
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <1500000>;
 				regulator-always-on;
@@ -399,7 +399,7 @@ buck4_reg: BUCK4 {
 			};
 
 			buck5_reg: BUCK5 {
-				regulator-name = "vdd_m12";
+				regulator-name = "VDD_M12";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <1500000>;
 				regulator-always-on;
@@ -408,7 +408,7 @@ buck5_reg: BUCK5 {
 			};
 
 			buck6_reg: BUCK6 {
-				regulator-name = "vdd12_5m";
+				regulator-name = "VDD12_5M";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <1500000>;
 				regulator-always-on;
@@ -417,7 +417,7 @@ buck6_reg: BUCK6 {
 			};
 
 			buck9_reg: BUCK9 {
-				regulator-name = "vddf28_emmc";
+				regulator-name = "VDDF28_EMMC";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <3000000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6904091d4837..c4cc7611898c 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -454,7 +454,7 @@ ldo26_reg: LDO26 {
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
@@ -463,7 +463,7 @@ buck1_reg: BUCK1 {
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <912500>;
 				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
@@ -472,7 +472,7 @@ buck2_reg: BUCK2 {
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
@@ -481,7 +481,7 @@ buck3_reg: BUCK3 {
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
@@ -641,9 +641,8 @@ i2c_ddc: i2c-gpio {
 		pinctrl-0 = <&i2c2_gpio_bus>;
 		status = "okay";
 		compatible = "i2c-gpio";
-		gpios = <&gpa0 6 0 /* sda */
-			 &gpa0 7 0 /* scl */
-			>;
+		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index e9a09dd0a49b..dd7f8385d81e 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -673,7 +673,7 @@ regulator-state-mem {
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "PVDD_ARM_1V0";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 0cd75dadf292..188639738dc3 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -75,8 +75,8 @@ &iomuxc {
 	imx27-phycard-s-rdk {
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
new file mode 100644
index 000000000000..223275f028f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-eval-v3.dts"
+#include "imx6qdl-colibri-v1_1-uhs.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
+		     "toradex,colibri_imx6dl-v1_1",
+		     "toradex,colibri_imx6dl-eval-v3",
+		     "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+	/*
+	 * Please make sure your carrier board does not pull-up any of
+	 * the MMC/SD signals to 3.3 volt before attempting to activate
+	 * UHS-I support.
+	 * To let signaling voltage be changed to 1.8V, please
+	 * delete no-1-8-v property (example below):
+	 * /delete-property/no-1-8-v;
+	 */
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
index 0d594e4bd559..a1173bf5bff5 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -38,7 +38,7 @@ &reg_usb_h1_vbus {
 };
 
 &switch_ports {
-	/delete-node/ port@2;
+	/delete-node/ port@3;
 };
 
 &touchscreen {
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index bb74fc62d913..a2dd7e549568 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -22,6 +22,53 @@ clk_ext_audio_codec: clock-codec {
 		clock-frequency = <24000000>;
 	};
 
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		ddc-i2c-bus = <&i2c2>;
+		backlight = <&display_bl>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "imx-sgtl5000";
@@ -65,6 +112,15 @@ sgtl5000: codec@a {
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&sw2_reg>;
 	};
+
+	touchscreen@38 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+	};
 };
 
 &iomuxc {
@@ -77,9 +133,7 @@ MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x400120b0
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x400120b0
 			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x400120b0
 			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x120b0
 			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x400120b0
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x120b0
 			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x120b0
 			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x400120b0
 			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0
@@ -132,6 +186,52 @@ MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x000b1
 		>;
 	};
 
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27			0x120b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreen-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1
+		>;
+	};
+
 	pinctrl_pcie: pcie-grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1
@@ -139,6 +239,10 @@ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -146,6 +250,13 @@ &pcie {
 	status = "okay";
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
 &ssi1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
new file mode 100644
index 000000000000..7672fbfc29be
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+&iomuxc {
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+		>;
+	};
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&vgen3_reg>;
+	wakeup-source;
+	keep-power-in-suspend;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 6e3c6b4925a7..240b86d2eb71 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -193,7 +193,16 @@ vgen2_reg: vgen2 {
 				regulator-always-on;
 			};
 
-			/* vgen3: unused */
+			/*
+			 * +V3.3_1.8_SD1 coming off VGEN3 and supplying
+			 * the i.MX 6 NVCC_SD1.
+			 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
 
 			vgen4_reg: vgen4 {
 				regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 6d7f6b9035bc..b06577808ff4 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -53,10 +53,21 @@ vcc_3v3: regulator-vcc-3v3 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-handle = <&phy>;
 	phy-mode = "rgmii-id";
 	phy-reset-duration = <2>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
index 9aaed85138cb..8773344b54aa 100644
--- a/arch/arm/boot/dts/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7-tqma7.dtsi
@@ -16,7 +16,7 @@ memory@80000000 {
 };
 
 &cpu0 {
-	arm-supply = <&sw1a_reg>;
+	cpu-supply = <&sw1a_reg>;
 };
 
 &i2c1 {
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 89267cd59037..713483c39c9d 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -37,6 +37,10 @@ &cpu0 {
 	cpu-supply = <&sw1a_reg>;
 };
 
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
index c59d72e50920..219a0404a058 100644
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -13,6 +13,10 @@ memory@80000000 {
 	};
 };
 
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
 &gpmi {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 6b4acea1ef79..e0751e6ba3c0 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -121,6 +121,10 @@ &cpu0 {
 	cpu-supply = <&sw1a_reg>;
 };
 
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 869efbc4af42..17cca8a9f77b 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -162,6 +162,10 @@ &cpu0 {
 	cpu-supply = <&sw1a_reg>;
 };
 
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &ecspi3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi
index 8ad3048dac0d..598aed1ffd99 100644
--- a/arch/arm/boot/dts/imx7d-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi
@@ -9,3 +9,7 @@
 
 #include "imx7d.dtsi"
 #include "imx7-tqma7.dtsi"
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
index 2b8d6cc45a53..e5e20b07f184 100644
--- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
@@ -33,7 +33,7 @@ debug {
 };
 
 &cpu0 {
-	arm-supply = <&sw1a_reg>;
+	cpu-supply = <&sw1a_reg>;
 };
 
 &ecspi1 {
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
index 39812c92bf0d..cbf0dbb4c198 100644
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
@@ -182,7 +182,7 @@ &adc2 {
 };
 
 &cpu0 {
-	arm-supply = <&sw1a_reg>;
+	cpu-supply = <&sw1a_reg>;
 };
 
 &clks {
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index b7f10bf94576..db640bab8c1d 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -45,6 +45,19 @@ vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 {
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
 	};
+
+	hdmi: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
 };
 
 &k2g_pinctrl {
@@ -89,6 +102,13 @@ K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c
 		>;
 	};
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
 	ecap0_pins: ecap0_pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4)	/* pr1_mdio_data.ecap0_in_apwm0_out */
@@ -160,6 +180,40 @@ K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.M
 			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
 		>;
 	};
+
+	vout_pins: pinmux_vout_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */
+			K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */
+			K2G_CORE_IOPAD(0x1080) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata21.dssdata21 */
+			K2G_CORE_IOPAD(0x1084) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata20.dssdata20 */
+			K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata19.dssdata19 */
+			K2G_CORE_IOPAD(0x108c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata18.dssdata18 */
+			K2G_CORE_IOPAD(0x1090) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata17.dssdata17 */
+			K2G_CORE_IOPAD(0x1094) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata16.dssdata16 */
+			K2G_CORE_IOPAD(0x1098) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata15.dssdata15 */
+			K2G_CORE_IOPAD(0x109c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata14.dssdata14 */
+			K2G_CORE_IOPAD(0x10a0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata13.dssdata13 */
+			K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata12.dssdata12 */
+			K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata11.dssdata11 */
+			K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata10.dssdata10 */
+			K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata9.dssdata9 */
+			K2G_CORE_IOPAD(0x10b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata8.dssdata8 */
+			K2G_CORE_IOPAD(0x10b8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata7.dssdata7 */
+			K2G_CORE_IOPAD(0x10bc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata6.dssdata6 */
+			K2G_CORE_IOPAD(0x10c0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata5.dssdata5 */
+			K2G_CORE_IOPAD(0x10c4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata4.dssdata4 */
+			K2G_CORE_IOPAD(0x10c8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata3.dssdata3 */
+			K2G_CORE_IOPAD(0x10cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata2.dssdata2 */
+			K2G_CORE_IOPAD(0x10d0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata1.dssdata1 */
+			K2G_CORE_IOPAD(0x10d4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata0.dssdata0 */
+			K2G_CORE_IOPAD(0x10d8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssvsync.dssvsync */
+			K2G_CORE_IOPAD(0x10dc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsshsync.dsshsync */
+			K2G_CORE_IOPAD(0x10e0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsspclk.dsspclk */
+			K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssde */
+			K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */
+		>;
+	};
 };
 
 &uart0 {
@@ -357,3 +411,50 @@ &netcp {
 	pinctrl-0 = <&emac_pins>;
 	status = "okay";
 };
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sii9022: sii9022@3b {
+		#sound-dai-cells = <0>;
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vout_pins>;
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 1c833105d6c5..08ba31780baa 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -324,6 +324,28 @@ gpio1: gpio@260a000 {
 			clock-names = "gpio";
 		};
 
+		dss: dss@02540000 {
+			compatible = "ti,k2g-dss";
+			reg =	<0x02540000 0x400>,
+				<0x02550000 0x1000>,
+				<0x02557000 0x1000>,
+				<0x0255a800 0x100>,
+				<0x0255ac00 0x100>;
+			reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
+			clocks =	<&k2g_clks 0x2 0>,
+					<&k2g_clks 0x2 1>;
+			clock-names = "fck", "vp1";
+			interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&k2g_pds 0x2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			max-memory-bandwidth = <230000000>;
+		};
+
 		edma0: edma@2700000 {
 			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
 			reg =	<0x02700000 0x8000>;
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 9b1fe99d55b1..5edf001f6138 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -242,6 +242,20 @@ &esdhc {
         status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	n25q128a130: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &sai1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index b7606130ade9..0447748f9fa0 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -138,6 +138,7 @@ fixed-link {
 	mac@1 {
 		compatible = "mediatek,eth-mac";
 		reg = <1>;
+		phy-mode = "rgmii";
 		phy-handle = <&phy5>;
 	};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index bfa9ce4c6e69..c6956015dedc 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -166,6 +166,7 @@ timer {
 			     <1 4 0xf08>,
 			     <1 1 0xf08>;
 		clock-frequency = <48000000>;
+		always-on;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 4021f661cd11..b912da9a3ff3 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -93,6 +93,12 @@ sleep_clk: sleep_clk {
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq806x", "qcom,scm";
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index eaa1001d0a46..d4dc98214225 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -1,7 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "qcom-pma8084.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "Samsung Galaxy S5";
@@ -14,6 +16,194 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pma8084-regulators {
+					compatible = "qcom,rpm-pma8084-regulators";
+					status = "okay";
+
+					pma8084_s1: s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					pma8084_s2: s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					pma8084_s3: s3 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					pma8084_s4: s4 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_s5: s5 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+					};
+
+					pma8084_s6: s6 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					pma8084_l1: l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					pma8084_l2: l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					pma8084_l3: l3 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					pma8084_l4: l4 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					pma8084_l5: l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l6: l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l7: l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l8: l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l9: l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l10: l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l11: l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					pma8084_l12: l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l13: l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l14: l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l15: l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					pma8084_l16: l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					pma8084_l17: l17 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					pma8084_l18: l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					pma8084_l19: l19 {
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					pma8084_l20: l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-system-load = <200000>;
+					};
+
+					pma8084_l21: l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l22: l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					pma8084_l23: l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					pma8084_l24: l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+					};
+
+					pma8084_l25: l25 {
+						regulator-min-microvolt = <2100000>;
+						regulator-max-microvolt = <2100000>;
+					};
+
+					pma8084_l26: l26 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					pma8084_l27: l27 {
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					pma8084_lvs1: lvs1 {};
+					pma8084_lvs2: lvs2 {};
+					pma8084_lvs3: lvs3 {};
+					pma8084_lvs4: lvs4 {};
+
+					pma8084_5vs1: 5vs1 {};
+				};
+			};
+		};
+	};
+
+	/delete-node/ vreg-boost;
 };
 
 &soc {
@@ -21,4 +211,215 @@ serial@f991e000 {
 		status = "ok";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		home-key {
+			label = "home_key";
+			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	pinctrl@fd510000 {
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <4>;
+				bias-pull-up;
+			};
+		};
+	};
+
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pma8084_l20>;
+		vqmmc-supply = <&pma8084_s4>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		/*extcon = <&smbb>, <&usb_id>;*/
+		/*vbus-supply = <&chg_otg>;*/
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pma8084_l6>;
+				v3p3-supply = <&pma8084_l24>;
+
+				/*extcon = <&smbb>;*/
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
+	pinctrl@fd510000 {
+		i2c6_pins: i2c6 {
+			mux {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	i2c@f9928000 {
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_pins>;
+
+		pmic@60 {
+			reg = <0x60>;
+			compatible = "maxim,max77826";
+
+			regulators {
+				max77826_ldo1: LDO1 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				max77826_ldo2: LDO2 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				max77826_ldo3: LDO3 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				max77826_ldo4: LDO4 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo5: LDO5 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo6: LDO6 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo7: LDO7 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo8: LDO8 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo9: LDO9 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo10: LDO10 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				max77826_ldo11: LDO11 {
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				max77826_ldo12: LDO12 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo13: LDO13 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo14: LDO14 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo15: LDO15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_buck: BUCK {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+				};
+
+				max77826_buckboost: BUCKBOOST {
+					regulator-min-microvolt = <3400000>;
+					regulator-max-microvolt = <3400000>;
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pma8084@0 {
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3", "gpio5";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PMA8084_GPIO_S4>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 2ea2308d91b3..51f5f904f9eb 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -974,6 +974,17 @@ blsp_i2c3: i2c@f9925000 {
 			#size-cells = <0>;
 		};
 
+		blsp_i2c6: i2c@f9928000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9928000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		blsp_i2c8: i2c@f9964000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
index 72b79770e336..cace43807497 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -304,7 +304,6 @@ ostm0: timer@e803b000 {
 			reg = <0xe803b000 0x30>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 36>;
-			clock-names = "ostm0";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
@@ -314,7 +313,6 @@ ostm1: timer@e803c000 {
 			reg = <0xe803c000 0x30>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 35>;
-			clock-names = "ostm1";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
@@ -324,7 +322,6 @@ ostm2: timer@e803d000 {
 			reg = <0xe803d000 0x30>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 34>;
-			clock-names = "ostm2";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index a5cd31229fbd..a3ba722a9d7f 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -131,7 +131,14 @@ i2c5: i2c@e60b0000 {
 	cmt1: timer@e6130000 {
 		compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index ebc1ff64f530..014805894ea7 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -83,7 +83,7 @@ ceu1: ceu@fe914000 {
 	};
 
 	cmt1: timer@e6138000 {
-		compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
+		compatible = "renesas,r8a7740-cmt1";
 		reg = <0xe6138000 0x170>;
 		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index e8b340bb99bc..fff123753b85 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -338,7 +338,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index def840b8b2d3..5050ac19041d 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -338,7 +338,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 7ab58d8bb740..b0d1fc24e97e 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -302,7 +302,7 @@ irqc: interrupt-controller@e61c0000 {
 			resets = <&cpg 407>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -312,7 +312,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -321,7 +321,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -331,7 +331,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -340,7 +340,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -350,7 +350,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e5ef9fd4284a..166d5566229d 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -427,7 +427,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -437,7 +437,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -446,7 +446,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -456,7 +456,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -465,7 +465,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -475,7 +475,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6e5bd86731cd..225676fbe312 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -291,6 +291,17 @@ pfc: pin-controller@e6060000 {
 			reg = <0 0xe6060000 0 0x250>;
 		};
 
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7791", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a7791-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
@@ -350,7 +361,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -360,7 +371,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -369,7 +380,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -379,7 +390,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -388,7 +399,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -398,7 +409,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
@@ -407,7 +418,7 @@ ipmmu_rt: mmu@ffc80000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
@@ -1067,6 +1078,76 @@ msiof2: spi@e6e00000 {
 			status = "disabled";
 		};
 
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		adc: adc@e6e54000 {
 			compatible = "renesas,r8a7791-gyroadc",
 				     "renesas,rcar-gyroadc";
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index dadbda16161b..1b62a7e06b42 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -336,7 +336,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -346,7 +346,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -355,7 +355,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -365,7 +365,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -374,7 +374,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -384,7 +384,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
@@ -393,7 +393,7 @@ ipmmu_rt: mmu@ffc80000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 2c9e7a1ebfec..8d7f8798628a 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -290,7 +290,7 @@ irqc0: interrupt-controller@e61c0000 {
 			resets = <&cpg 407>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -300,7 +300,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -309,7 +309,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -319,7 +319,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -328,7 +328,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -338,7 +338,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 781ac7583522..d9a0c9a29b68 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -128,7 +128,7 @@ gpu: gpu@10090000 {
 		assigned-clocks = <&cru SCLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index 5670b33fd1bd..aed879db6c15 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -46,7 +46,7 @@ mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			clocks = <&cru SCLK_MAC_PHY>;
diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts
index 679fc2b00e5a..933ef69da32a 100644
--- a/arch/arm/boot/dts/rk3229-xms6.dts
+++ b/arch/arm/boot/dts/rk3229-xms6.dts
@@ -150,7 +150,7 @@ mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400",
 			             "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 06172ebbf0ce..5485a9918da6 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -555,7 +555,7 @@ gpu: gpu@20000000 {
 				  "pp1",
 				  "ppmmu1";
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU_A>;
 		status = "disabled";
 	};
@@ -1020,7 +1020,7 @@ i2c3_xfer: i2c3-xfer {
 			};
 		};
 
-		spi-0 {
+		spi0 {
 			spi0_clk: spi0-clk {
 				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
 			};
@@ -1038,7 +1038,7 @@ spi0_cs1: spi0-cs1 {
 			};
 		};
 
-		spi-1 {
+		spi1 {
 			spi1_clk: spi1-clk {
 				rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
 			};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index f9fcb7e9657b..d929b60517ab 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -84,7 +84,7 @@ gpu: gpu@10090000 {
 		compatible = "arm,mali-400";
 		reg = <0x10090000 0x10000>;
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		assigned-clocks = <&cru ACLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_GPU>;
diff --git a/arch/arm/boot/dts/rtd1195-horseradish.dts b/arch/arm/boot/dts/rtd1195-horseradish.dts
new file mode 100644
index 000000000000..9d06d3d34c74
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-horseradish.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+	compatible = "realtek,horseradish", "realtek,rtd1195";
+	model = "Realtek Horseradish EVB";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@a800 {
+		device_type = "memory";
+		reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */
+		      <0x18070000 0x00090000>, /* r-bus to NOR flash */
+		      <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
new file mode 100644
index 000000000000..c7951b9a2c97
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+	compatible = "mele,x1000", "realtek,rtd1195";
+	model = "MeLE X1000";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@a800 {
+		device_type = "memory";
+		reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */
+		      <0x18070000 0x00090000>, /* r-bus to NOR flash */
+		      <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
new file mode 100644
index 000000000000..21897210d9d0
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/memreserve/ 0x00000000 0x0000a800; /* boot code */
+/memreserve/ 0x0000a800 0x000f5800;
+/memreserve/ 0x17fff000 0x00001000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1195.h>
+
+/ {
+	compatible = "realtek,rtd1195";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@b000 {
+			reg = <0x0000b000 0x1000>;
+		};
+
+		audio@1b00000 {
+			reg = <0x01b00000 0x400000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x01ffe000 0x4000>;
+		};
+
+		secure@10000000 {
+			reg = <0x10000000 0x100000>;
+			no-map;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <27000000>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0000a800>,
+			 <0x18000000 0x18000000 0x00070000>,
+			 <0x18100000 0x18100000 0x01000000>,
+			 <0x80000000 0x80000000 0x80000000>;
+
+		rbus: bus@18000000 {
+			compatible = "simple-bus";
+			reg = <0x18000000 0x70000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000000 0x70000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x1000>;
+			};
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		resets = <&iso_reset RTD1195_ISO_RSTN_UR0>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		resets = <&reset2 RTD1195_RSTN_UR1>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index c134154bcce8..01fd06328420 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -99,7 +99,7 @@ pmu {
 	};
 
 	cmt1: timer@e6138000 {
-		compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
+		compatible = "renesas,sh73a0-cmt1";
 		reg = <0xe6138000 0x200>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 000000000000..033cab3443f8
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME-eMMC";
+	compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 655404d6d3a3..c010b27fdb6a 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -610,6 +610,16 @@ crypto: crypto@1c15000 {
 			clock-names = "bus", "mod";
 		};
 
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-a83t-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
 		usb_otg: usb@1c19000 {
 			compatible = "allwinner,sun8i-a83t-musb",
 				     "allwinner,sun8i-a33-musb";
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d277d043031b..4c6704e4c57e 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -31,7 +31,7 @@ leds {
 
 		pwr_led {
 			label = "bananapi-m2-zero:red:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index e83aa6866e7e..4e89701df91f 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -112,6 +112,26 @@ cpu3: cpu@3 {
 		};
 	};
 
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
@@ -205,9 +225,7 @@ mali: gpu@1c40000 {
 			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
 			clock-names = "bus", "core";
 			resets = <&ccu RST_BUS_GPU>;
-
-			assigned-clocks = <&ccu CLK_GPU>;
-			assigned-clock-rates = <384000000>;
+			operating-points-v2 = <&gpu_opp_table>;
 		};
 
 		ths: thermal-sensor@1c25000 {
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 01a5df9aa71b..22d533d18992 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -239,6 +239,16 @@ ths_calibration: thermal-sensor-calibration@34 {
 			};
 		};
 
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-h3-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
 		usb_otg: usb@1c19000 {
 			compatible = "allwinner,sun8i-h3-musb";
 			reg = <0x01c19000 0x400>;
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index d3e032e7d21a..08be733ee2cd 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -46,8 +46,7 @@ dsi@54300000 {
 			avdd-dsi-csi-supply = <&avdd_1v2_reg>;
 
 			panel@0 {
-				compatible = "panasonic,vvx10f004b00",
-					     "simple-panel";
+				compatible = "panasonic,vvx10f004b00";
 				reg = <0>;
 
 				power-supply = <&avdd_lcd_reg>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 8c2ee6e7d6f1..73361dbe2e43 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -1087,7 +1087,7 @@ power {
 	};
 
 	panel: panel {
-		compatible = "lg,lp129qe", "simple-panel";
+		compatible = "lg,lp129qe";
 
 		backlight = <&backlight>;
 		ddc-i2c-bus = <&dpaux>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index 3c0f2681fcde..37ad508b61d9 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -223,7 +223,7 @@ panel: panel {
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index d8004d68efa0..af4740847769 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -205,7 +205,7 @@ panel: panel {
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 1d96d92b72a7..02cd67ea2503 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -665,7 +665,7 @@ power {
 	};
 
 	panel: panel {
-		compatible = "auo,b101aw03", "simple-panel";
+		compatible = "auo,b101aw03";
 
 		power-supply = <&vdd_pnl_reg>;
 		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index cda5448c2ace..c73510cd501c 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -57,7 +57,7 @@ backlight: backlight {
 	};
 
 	panel: panel {
-		compatible = "innolux,n156bge-l21", "simple-panel";
+		compatible = "innolux,n156bge-l21";
 
 		power-supply =  <&vdd_1v8_reg>, <&vdd_3v3_reg>;
 		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index be0ab9b84b9a..cce3a3fb82ed 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -604,7 +604,7 @@ wifi {
 	};
 
 	panel: panel {
-		compatible = "samsung,ltn101nt05", "simple-panel";
+		compatible = "samsung,ltn101nt05";
 
 		ddc-i2c-bus = <&lvds_ddc>;
 		power-supply = <&vdd_pnl_reg>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index f91441683aad..376ecb6435f4 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -826,7 +826,7 @@ lid {
 	};
 
 	panel: panel {
-		compatible = "chunghwa,claa101wa01a", "simple-panel";
+		compatible = "chunghwa,claa101wa01a";
 
 		power-supply = <&vdd_pnl_reg>;
 		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index f44551e2d9d0..022649119821 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -611,7 +611,7 @@ power {
 	};
 
 	panel: panel {
-		compatible = "chunghwa,claa101wa01a", "simple-panel";
+		compatible = "chunghwa,claa101wa01a";
 
 		power-supply = <&vdd_pnl_reg>;
 		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 749fc6d1ff70..b39c26806bf2 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -195,7 +195,7 @@ panel: panel {
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index 0be50e881684..e29dca92ba0a 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -196,7 +196,7 @@ panel: panel {
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 4b4f49a49394..5ee5d141bd81 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -432,7 +432,7 @@ clk32k_in: clock@0 {
 	};
 
 	panel: panel {
-		compatible = "chunghwa,claa101wb01", "simple-panel";
+		compatible = "chunghwa,claa101wb01";
 		ddc-i2c-bus = <&panelddc>;
 
 		power-supply = <&vdd_pnl1_reg>;
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 5965150ecdd2..8e106e784dce 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -159,7 +159,7 @@ panel: panel {
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 8e7a3ed2a4df..44ff9cd88d81 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -103,6 +103,7 @@ CONFIG_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
 CONFIG_MFD_SYSCON=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 3c3a00fc71f6..374fbff8eaa6 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -69,6 +69,7 @@ CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_ATH3K=y
 CONFIG_BT_HCIUART_INTEL=y
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_HCIUART_AG6XX=y
 CONFIG_BT_HCIUART_MRVL=y
 CONFIG_BT_HCIBCM203X=m
@@ -78,8 +79,8 @@ CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 CONFIG_BT_ATH3K=m
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
 CONFIG_MAC80211_LEDS=y
 CONFIG_NFC=y
 CONFIG_NFC_DIGITAL=m
@@ -94,7 +95,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
@@ -133,6 +134,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
 CONFIG_HW_RANDOM=y
 CONFIG_TCG_TPM=y
 CONFIG_TCG_TIS_I2C_INFINEON=y
@@ -207,7 +209,7 @@ CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_VIDEO_VIVID=m
 CONFIG_CEC_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_SAMSUNG_S5P_CEC=m
+CONFIG_CEC_SAMSUNG_S5P=m
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_S5K6A3=m
 CONFIG_VIDEO_S5C73M3=m
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f8e45351c3f9..9c86b1ab2f1d 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -638,7 +638,7 @@ CONFIG_VIDEO_RENESAS_VSP1=m
 CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_VIDEO_VIVID=m
 CONFIG_CEC_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_SAMSUNG_S5P_CEC=m
+CONFIG_CEC_SAMSUNG_S5P=m
 CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_ML86V7667=m
 CONFIG_IMX_IPUV3_CORE=m
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 3cc3ca5fa027..583d8abd80a4 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -81,7 +81,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 CONFIG_CMA=y
 CONFIG_ZSMALLOC=m
-CONFIG_PGTABLE_MAPPING=y
+CONFIG_ZSMALLOC_PGTABLE_MAPPING=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 838307a9bb92..ef3b9d0d6e50 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -125,6 +125,7 @@ CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_LVDS_CODEC=y
 CONFIG_DRM_SII902X=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 61b8be19e527..b105ce7120cc 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -107,6 +107,7 @@ CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SUN4I_CODEC=y
+CONFIG_SND_SUN8I_CODEC_ANALOG=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 99929122dad7..adee13126c62 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -269,10 +269,9 @@
 	.endif							;\
 	.popsection
 #define ALT_UP_B(label)					\
-	.equ	up_b_offset, label - 9998b			;\
 	.pushsection ".alt.smp.init", "a"			;\
 	.long	9998b						;\
-	W(b)	. + up_b_offset					;\
+	W(b)	. + (label - 9998b)					;\
 	.popsection
 #else
 #define ALT_SMP(instr...)
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index deef4d0cb3b5..673c7dd75ab9 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -82,7 +82,8 @@ void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int,
 				       struct pt_regs *),
 		     int sig, int code, const char *name);
 
-extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+extern asmlinkage void c_backtrace(unsigned long fp, int pmode,
+				   const char *loglvl);
 
 struct mm_struct;
 void show_pte(const char *lvl, struct mm_struct *mm, unsigned long addr);
diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
index 5ac46e2860bc..9383f236e795 100644
--- a/arch/arm/include/asm/efi.h
+++ b/arch/arm/include/asm/efi.h
@@ -50,14 +50,6 @@ void efi_virtmap_unload(void);
 
 /* arch specific definitions used by the stub code */
 
-#define efi_bs_call(func, ...)	efi_system_table()->boottime->func(__VA_ARGS__)
-#define efi_rt_call(func, ...)	efi_system_table()->runtime->func(__VA_ARGS__)
-#define efi_is_native()		(true)
-
-#define efi_table_attr(inst, attr)	(inst->attr)
-
-#define efi_call_proto(inst, func, ...) inst->func(inst, ##__VA_ARGS__)
-
 struct screen_info *alloc_screen_info(void);
 void free_screen_info(struct screen_info *si);
 
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 36805f94939e..1933aed9f68d 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -221,7 +221,7 @@ PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 #define pmdp_establish generic_pmdp_establish
 
 /* represent a notpresent pmd by faulting entry, this is used by pmdp_invalidate */
-static inline pmd_t pmd_mknotpresent(pmd_t pmd)
+static inline pmd_t pmd_mkinvalid(pmd_t pmd)
 {
 	return __pmd(pmd_val(pmd) & ~L_PMD_SECT_VALID);
 }
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index befc8fcec98f..fba20607c53c 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -17,7 +17,6 @@
 
 #else
 
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopud.h>
 #include <asm/memory.h>
 #include <asm/pgtable-hwdef.h>
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index 172b08ff3760..987fefb0a4db 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -29,7 +29,8 @@ static inline int __in_irqentry_text(unsigned long ptr)
 }
 
 extern void __init early_trap_init(void *);
-extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
+extern void dump_backtrace_entry(unsigned long where, unsigned long from,
+				 unsigned long frame, const char *loglvl);
 extern void ptrace_break(struct pt_regs *regs);
 
 extern void *vectors_page;
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index 6e282c33126b..0f8a3439902d 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -36,7 +36,8 @@ extern struct unwind_table *unwind_table_add(unsigned long start,
 					     unsigned long text_addr,
 					     unsigned long text_size);
 extern void unwind_table_del(struct unwind_table *tab);
-extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
+extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+			     const char *loglvl);
 
 #endif	/* !__ASSEMBLY__ */
 
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 182422981386..254ab7138c85 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -78,13 +78,32 @@ void elf_set_personality(const struct elf32_hdr *x)
 EXPORT_SYMBOL(elf_set_personality);
 
 /*
- * Set READ_IMPLIES_EXEC if:
- *  - the binary requires an executable stack
- *  - we're running on a CPU which doesn't support NX.
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ *
+ * The decision process for determining the results are:
+ *
+ *                 CPU: | lacks NX*  | has NX     |
+ * ELF:                 |            |            |
+ * ---------------------|------------|------------|
+ * missing PT_GNU_STACK | exec-all   | exec-all   |
+ * PT_GNU_STACK == RWX  | exec-all   | exec-stack |
+ * PT_GNU_STACK == RW   | exec-all   | exec-none  |
+ *
+ *  exec-all  : all PROT_READ user mappings are executable, except when
+ *              backed by files on a noexec-filesystem.
+ *  exec-none : only PROT_EXEC user mappings are executable.
+ *  exec-stack: only the stack and PROT_EXEC user mappings are executable.
+ *
+ *  *this column has no architectural effect: NX markings are ignored by
+ *   hardware, but may have behavioral effects when "wants X" collides with
+ *   "cannot be X" constraints in memory permission flags, as in
+ *   https://lkml.kernel.org/r/20190418055759.GA3155@mellanox.com
+ *
  */
 int arm_elf_read_implies_exec(int executable_stack)
 {
-	if (executable_stack != EXSTACK_DISABLE_X)
+	if (executable_stack == EXSTACK_DEFAULT)
 		return 1;
 	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 17bd32b22371..0203e545bbc8 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -253,20 +253,15 @@ asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd,
 {
 	struct oabi_epoll_event user;
 	struct epoll_event kernel;
-	mm_segment_t fs;
-	long ret;
 
-	if (op == EPOLL_CTL_DEL)
-		return sys_epoll_ctl(epfd, op, fd, NULL);
-	if (copy_from_user(&user, event, sizeof(user)))
+	if (ep_op_has_event(op) &&
+	    copy_from_user(&user, event, sizeof(user)))
 		return -EFAULT;
+
 	kernel.events = user.events;
 	kernel.data   = user.data;
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_epoll_ctl(epfd, op, fd, &kernel);
-	set_fs(fs);
-	return ret;
+
+	return do_epoll_ctl(epfd, op, fd, &kernel, false);
 }
 
 asmlinkage long sys_oabi_epoll_wait(int epfd,
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 1e70e7227f0f..09faa0efe47b 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -62,21 +62,24 @@ __setup("user_debug=", user_debug_setup);
 
 static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
-void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
+void dump_backtrace_entry(unsigned long where, unsigned long from,
+			  unsigned long frame, const char *loglvl)
 {
 	unsigned long end = frame + 4 + sizeof(struct pt_regs);
 
 #ifdef CONFIG_KALLSYMS
-	printk("[<%08lx>] (%ps) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
+	printk("%s[<%08lx>] (%ps) from [<%08lx>] (%pS)\n",
+		loglvl, where, (void *)where, from, (void *)from);
 #else
-	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
+	printk("%sFunction entered at [<%08lx>] from [<%08lx>]\n",
+		loglvl, where, from);
 #endif
 
 	if (in_entry_text(from) && end <= ALIGN(frame, THREAD_SIZE))
-		dump_mem("", "Exception stack", frame + 4, end);
+		dump_mem(loglvl, "Exception stack", frame + 4, end);
 }
 
-void dump_backtrace_stm(u32 *stack, u32 instruction)
+void dump_backtrace_stm(u32 *stack, u32 instruction, const char *loglvl)
 {
 	char str[80], *p;
 	unsigned int x;
@@ -88,12 +91,12 @@ void dump_backtrace_stm(u32 *stack, u32 instruction)
 			if (++x == 6) {
 				x = 0;
 				p = str;
-				printk("%s\n", str);
+				printk("%s%s\n", loglvl, str);
 			}
 		}
 	}
 	if (p != str)
-		printk("%s\n", str);
+		printk("%s%s\n", loglvl, str);
 }
 
 #ifndef CONFIG_ARM_UNWIND
@@ -201,17 +204,19 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_ARM_UNWIND
-static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+				  const char *loglvl)
 {
-	unwind_backtrace(regs, tsk);
+	unwind_backtrace(regs, tsk, loglvl);
 }
 #else
-static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+			   const char *loglvl)
 {
 	unsigned int fp, mode;
 	int ok = 1;
 
-	printk("Backtrace: ");
+	printk("%sBacktrace: ", loglvl);
 
 	if (!tsk)
 		tsk = current;
@@ -238,13 +243,13 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 	pr_cont("\n");
 
 	if (ok)
-		c_backtrace(fp, mode);
+		c_backtrace(fp, mode, loglvl);
 }
 #endif
 
-void show_stack(struct task_struct *tsk, unsigned long *sp)
+void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 {
-	dump_backtrace(NULL, tsk);
+	dump_backtrace(NULL, tsk, loglvl);
 	barrier();
 }
 
@@ -288,7 +293,7 @@ static int __die(const char *str, int err, struct pt_regs *regs)
 	if (!user_mode(regs) || in_interrupt()) {
 		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
 			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
-		dump_backtrace(regs, tsk);
+		dump_backtrace(regs, tsk, KERN_EMERG);
 		dump_instr(KERN_EMERG, regs);
 	}
 
@@ -663,10 +668,10 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		pr_err("[%d] %s: arm syscall %d\n",
 		       task_pid_nr(current), current->comm, no);
-		dump_instr("", regs);
+		dump_instr(KERN_ERR, regs);
 		if (user_mode(regs)) {
 			__show_regs(regs);
-			c_backtrace(frame_pointer(regs), processor_mode(regs));
+			c_backtrace(frame_pointer(regs), processor_mode(regs), KERN_ERR);
 		}
 	}
 #endif
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 11a964fd66f4..d2bd0df2318d 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -455,7 +455,8 @@ int unwind_frame(struct stackframe *frame)
 	return URC_OK;
 }
 
-void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		      const char *loglvl)
 {
 	struct stackframe frame;
 
@@ -493,7 +494,7 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 		urc = unwind_frame(&frame);
 		if (urc < 0)
 			break;
-		dump_backtrace_entry(where, frame.pc, frame.sp - 4);
+		dump_backtrace_entry(where, frame.pc, frame.sp - 4, loglvl);
 	}
 }
 
diff --git a/arch/arm/lib/backtrace-clang.S b/arch/arm/lib/backtrace-clang.S
index 2ff375144b55..6174c45f53a5 100644
--- a/arch/arm/lib/backtrace-clang.S
+++ b/arch/arm/lib/backtrace-clang.S
@@ -17,6 +17,7 @@
 #define sv_pc	r6
 #define mask	r7
 #define sv_lr	r8
+#define loglvl	r9
 
 ENTRY(c_backtrace)
 
@@ -99,6 +100,7 @@ ENDPROC(c_backtrace)
 						@ to ensure 8 byte alignment
 		movs	frame, r0		@ if frame pointer is zero
 		beq	no_frame		@ we have no stack frames
+		mov	loglvl, r2
 		tst	r1, #0x10		@ 26 or 32-bit mode?
 		moveq	mask, #0xfc000003
 		movne	mask, #0		@ mask for 32-bit
@@ -167,6 +169,7 @@ finished_setup:
 		mov	r1, sv_lr
 		mov	r2, frame
 		bic	r1, r1, mask		@ mask PC/LR for the mode
+		mov	r3, loglvl
 		bl	dump_backtrace_entry
 
 /*
@@ -183,6 +186,7 @@ finished_setup:
 		ldr	r0, [frame]		@ locals are stored in
 						@ the preceding frame
 		subeq	r0, r0, #4
+		mov	r2, loglvl
 		bleq	dump_backtrace_stm	@ dump saved registers
 
 /*
@@ -196,7 +200,8 @@ finished_setup:
 		bhi	for_each_frame
 
 1006:		adr	r0, .Lbad
-		mov	r1, frame
+		mov	r1, loglvl
+		mov	r2, frame
 		bl	printk
 no_frame:	ldmfd	sp!, {r4 - r9, fp, pc}
 ENDPROC(c_backtrace)
@@ -209,7 +214,7 @@ ENDPROC(c_backtrace)
 		.long   1005b, 1006b
 		.popsection
 
-.Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
+.Lbad:		.asciz	"%sBacktrace aborted due to bad frame pointer <%p>\n"
 		.align
 .Lopcode:	.word	0xe92d4800 >> 11	@ stmfd sp!, {... fp, lr}
 		.word	0x0b000000		@ bl if these bits are set
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index 582925238d65..872f658638d9 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -18,6 +18,7 @@
 #define sv_pc	r6
 #define mask	r7
 #define offset	r8
+#define loglvl	r9
 
 ENTRY(c_backtrace)
 
@@ -25,9 +26,10 @@ ENTRY(c_backtrace)
 		ret	lr
 ENDPROC(c_backtrace)
 #else
-		stmfd	sp!, {r4 - r8, lr}	@ Save an extra register so we have a location...
+		stmfd	sp!, {r4 - r9, lr}	@ Save an extra register so we have a location...
 		movs	frame, r0		@ if frame pointer is zero
 		beq	no_frame		@ we have no stack frames
+		mov	loglvl, r2
 
 		tst	r1, #0x10		@ 26 or 32-bit mode?
  ARM(		moveq	mask, #0xfc000003	)
@@ -73,6 +75,7 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 		ldr	r1, [frame, #-4]	@ get saved lr
 		mov	r2, frame
 		bic	r1, r1, mask		@ mask PC/LR for the mode
+		mov	r3, loglvl
 		bl	dump_backtrace_entry
 
 		ldr	r1, [sv_pc, #-4]	@ if stmfd sp!, {args} exists,
@@ -80,12 +83,14 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 		teq	r3, r1, lsr #11
 		ldreq	r0, [frame, #-8]	@ get sp
 		subeq	r0, r0, #4		@ point at the last arg
+		mov	r2, loglvl
 		bleq	dump_backtrace_stm	@ dump saved registers
 
 1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
 		ldr	r3, .Ldsi		@ instruction exists,
 		teq	r3, r1, lsr #11
 		subeq	r0, frame, #16
+		mov	r2, loglvl
 		bleq	dump_backtrace_stm	@ dump saved registers
 
 		teq	sv_fp, #0		@ zero saved fp means
@@ -96,9 +101,10 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 		bhi	for_each_frame
 
 1006:		adr	r0, .Lbad
-		mov	r1, frame
+		mov	r1, loglvl
+		mov	r2, frame
 		bl	printk
-no_frame:	ldmfd	sp!, {r4 - r8, pc}
+no_frame:	ldmfd	sp!, {r4 - r9, pc}
 ENDPROC(c_backtrace)
 		
 		.pushsection __ex_table,"a"
@@ -109,7 +115,7 @@ ENDPROC(c_backtrace)
 		.long	1004b, 1006b
 		.popsection
 
-.Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
+.Lbad:		.asciz	"%sBacktrace aborted due to bad frame pointer <%p>\n"
 		.align
 .Ldsi:		.word	0xe92dd800 >> 11	@ stmfd sp!, {... fp, ip, lr, pc}
 		.word	0xe92d0000 >> 11	@ stmfd sp!, {}
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index c9450982a155..d72b14c96670 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -24,6 +24,7 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 {
 	unsigned long addr = (unsigned long)_addr;
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pmd_t *pmd;
 	pte_t *pte;
 	pud_t *pud;
@@ -33,7 +34,11 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 	if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd)))
 		return 0;
 
-	pud = pud_offset(pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	if (unlikely(p4d_none(*p4d) || p4d_bad(*p4d)))
+		return 0;
+
+	pud = pud_offset(p4d, addr);
 	if (unlikely(pud_none(*pud) || pud_bad(*pud)))
 		return 0;
 
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index 06f8d64b65af..e3d12b21d6f6 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -172,6 +172,22 @@ struct device * __init imx_soc_device_init(void)
 		ocotp_compat = "fsl,imx7ulp-ocotp";
 		soc_id = "i.MX7ULP";
 		break;
+	case MXC_CPU_VF500:
+		ocotp_compat = "fsl,vf610-ocotp";
+		soc_id = "VF500";
+		break;
+	case MXC_CPU_VF510:
+		ocotp_compat = "fsl,vf610-ocotp";
+		soc_id = "VF510";
+		break;
+	case MXC_CPU_VF600:
+		ocotp_compat = "fsl,vf610-ocotp";
+		soc_id = "VF600";
+		break;
+	case MXC_CPU_VF610:
+		ocotp_compat = "fsl,vf610-ocotp";
+		soc_id = "VF610";
+		break;
 	default:
 		soc_id = "Unknown";
 	}
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index 9c929b09310c..565dc08412a2 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -3,11 +3,63 @@
  * Copyright 2012-2013 Freescale Semiconductor, Inc.
  */
 
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/io.h>
+
 #include <linux/irqchip.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include "common.h"
+#include "hardware.h"
+
+#define MSCM_CPxCOUNT		0x00c
+#define MSCM_CPxCFG1		0x014
+
+static void __init vf610_detect_cpu(void)
+{
+	struct device_node *np;
+	u32 cpxcount, cpxcfg1;
+	unsigned int cpu_type;
+	void __iomem *mscm;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,vf610-mscm-cpucfg");
+	if (WARN_ON(!np))
+		return;
+
+	mscm = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (WARN_ON(!mscm))
+		return;
+
+	cpxcount = readl_relaxed(mscm + MSCM_CPxCOUNT);
+	cpxcfg1  = readl_relaxed(mscm + MSCM_CPxCFG1);
+
+	iounmap(mscm);
+
+	cpu_type = cpxcount ? MXC_CPU_VF600 : MXC_CPU_VF500;
+
+	if (cpxcfg1)
+		cpu_type |= MXC_CPU_VFx10;
+
+	mxc_set_cpu_type(cpu_type);
+}
+
+static void __init vf610_init_machine(void)
+{
+	struct device *parent;
+
+	vf610_detect_cpu();
+
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	of_platform_default_populate(NULL, NULL, parent);
+}
+
 static const char * const vf610_dt_compat[] __initconst = {
 	"fsl,vf500",
 	"fsl,vf510",
@@ -20,5 +72,6 @@ static const char * const vf610_dt_compat[] __initconst = {
 DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF5xx/VF6xx (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
+	.init_machine   = vf610_init_machine,
 	.dt_compat	= vf610_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 2bfd2d59b4a6..48e6d781f15b 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -33,6 +33,12 @@
 #define MXC_CPU_IMX7D		0x72
 #define MXC_CPU_IMX7ULP		0xff
 
+#define MXC_CPU_VFx10		0x010
+#define MXC_CPU_VF500		0x500
+#define MXC_CPU_VF510		(MXC_CPU_VF500 | MXC_CPU_VFx10)
+#define MXC_CPU_VF600		0x600
+#define MXC_CPU_VF610		(MXC_CPU_VF600 | MXC_CPU_VFx10)
+
 #define IMX_DDR_TYPE_LPDDR2		1
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index ac1324c6453b..c4e97d35c310 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -72,7 +72,7 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	adrl	r3, l2dis_3630_offset	@ may be too distant for plain adr
+	adr	r3, l2dis_3630_offset
 	ldr	r2, [r3]		@ value for offset
 	str	r1, [r2, r3]		@ write to l2dis_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
diff --git a/arch/arm/mach-realtek/Kconfig b/arch/arm/mach-realtek/Kconfig
new file mode 100644
index 000000000000..19fdcf093fd1
--- /dev/null
+++ b/arch/arm/mach-realtek/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+menuconfig ARCH_REALTEK
+	bool "Realtek SoCs"
+	depends on ARCH_MULTI_V7
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+	select GENERIC_IRQ_CHIP
+	select RESET_CONTROLLER
+	help
+	  This enables support for the Realtek RTD1195 SoC family.
diff --git a/arch/arm/mach-realtek/Makefile b/arch/arm/mach-realtek/Makefile
new file mode 100644
index 000000000000..5382d5bbdd3c
--- /dev/null
+++ b/arch/arm/mach-realtek/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+obj-y += rtd1195.o
diff --git a/arch/arm/mach-realtek/rtd1195.c b/arch/arm/mach-realtek/rtd1195.c
new file mode 100644
index 000000000000..0381a4447384
--- /dev/null
+++ b/arch/arm/mach-realtek/rtd1195.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Realtek RTD1195
+ *
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+#include <linux/memblock.h>
+#include <asm/mach/arch.h>
+
+static void __init rtd1195_memblock_remove(phys_addr_t base, phys_addr_t size)
+{
+	int ret;
+
+	ret = memblock_remove(base, size);
+	if (ret)
+		pr_err("Failed to remove memblock %pa (%d)\n", &base, ret);
+}
+
+static void __init rtd1195_reserve(void)
+{
+	/* Exclude boot ROM from RAM */
+	rtd1195_memblock_remove(0x00000000, 0x0000a800);
+
+	/* Exclude peripheral register spaces from RAM */
+	rtd1195_memblock_remove(0x18000000, 0x00070000);
+	rtd1195_memblock_remove(0x18100000, 0x01000000);
+}
+
+static const char *const rtd1195_dt_compat[] __initconst = {
+	"realtek,rtd1195",
+	NULL
+};
+
+DT_MACHINE_START(rtd1195, "Realtek RTD1195")
+	.dt_compat = rtd1195_dt_compat,
+	.reserve = rtd1195_reserve,
+	.l2c_aux_val = 0x0,
+	.l2c_aux_mask = ~0x0,
+MACHINE_END
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 649e0a54784c..d60856898d97 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -180,7 +180,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node)
 
 	rsize = resource_size(&res);
 	if (rsize < trampoline_sz) {
-		pr_err("%s: reserved block with size 0x%x is to small for trampoline size 0x%x\n",
+		pr_err("%s: reserved block with size 0x%x is too small for trampoline size 0x%x\n",
 		       __func__, rsize, trampoline_sz);
 		return -EINVAL;
 	}
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index f9797a2b5d0d..beea4564eed4 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -9,9 +9,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/of_clk.h>
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 937d0a83f8fd..34f1baa10c54 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -405,10 +405,9 @@ static int wlf_gf_module_probe(struct i2c_client *i2c,
 			 gf_mods[i].name, rev + 1);
 
 		for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
-			if (!i2c_new_device(i2c->adapter,
-					    &(gf_mods[i].i2c_devs[j])))
-				dev_err(&i2c->dev,
-					"Failed to register dev: %d\n", ret);
+			if (IS_ERR(i2c_new_client_device(i2c->adapter,
+							 &(gf_mods[i].i2c_devs[j]))))
+				dev_err(&i2c->dev, "Failed to register\n");
 		}
 
 		spi_register_board_info(gf_mods[i].spi_devs,
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d96a101e5504..0631a7b02678 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -633,7 +633,7 @@ static void __init map_sa1100_gpio_regs( void )
 	int prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO);
 	pmd_t *pmd;
 
-	pmd = pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
+	pmd = pmd_offset(pud_offset(p4d_offset(pgd_offset_k(virt), virt), virt), virt);
 	*pmd = __pmd(phys | prot);
 	flush_pmd_entry(pmd);
 }
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 5bc82e2671c6..351f891b4842 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -104,6 +104,14 @@ static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = {
 	.enabled_at_boot = 1,
 };
 
+static struct gpiod_lookup_table shannon_display_gpio_table = {
+	.dev_id = "sa11x0-fb",
+	.table = {
+		GPIO_LOOKUP("gpio", 22, "shannon-lcden", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void __init shannon_init(void)
 {
 	sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata,
@@ -113,6 +121,7 @@ static void __init shannon_init(void)
 	sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table);
 	sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table);
 	sa11x0_ppc_configure_mcp();
+	gpiod_add_lookup_table(&shannon_display_gpio_table);
 	sa11x0_register_lcd(&shannon_lcd_info);
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
 	sa11x0_register_mcp(&shannon_mcp_data);
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 1ee5cd2840e0..c42ff8c314c8 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -24,6 +24,7 @@
 #include "rcar-gen2.h"
 
 static const struct of_device_id cpg_matches[] __initconst = {
+	{ .compatible = "renesas,r8a7742-cpg-mssr", .data = "extal" },
 	{ .compatible = "renesas,r8a7743-cpg-mssr", .data = "extal" },
 	{ .compatible = "renesas,r8a7744-cpg-mssr", .data = "extal" },
 	{ .compatible = "renesas,r8a7790-cpg-mssr", .data = "extal" },
@@ -209,6 +210,7 @@ DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)")
 MACHINE_END
 
 static const char * const rz_g1_boards_compat_dt[] __initconst = {
+	"renesas,r8a7742",
 	"renesas,r8a7743",
 	"renesas,r8a7744",
 	"renesas,r8a7745",
diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c
index 7d6291f23251..677549d6854c 100644
--- a/arch/arm/mm/dump.c
+++ b/arch/arm/mm/dump.c
@@ -207,6 +207,7 @@ struct pg_level {
 static struct pg_level pg_level[] = {
 	{
 	}, { /* pgd */
+	}, { /* p4d */
 	}, { /* pud */
 	}, { /* pmd */
 		.bits	= section_bits,
@@ -308,7 +309,7 @@ static void walk_pte(struct pg_state *st, pmd_t *pmd, unsigned long start,
 
 	for (i = 0; i < PTRS_PER_PTE; i++, pte++) {
 		addr = start + i * PAGE_SIZE;
-		note_page(st, addr, 4, pte_val(*pte), domain);
+		note_page(st, addr, 5, pte_val(*pte), domain);
 	}
 }
 
@@ -350,14 +351,14 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 			addr += SECTION_SIZE;
 			pmd++;
 			domain = get_domain_name(pmd);
-			note_page(st, addr, 3, pmd_val(*pmd), domain);
+			note_page(st, addr, 4, pmd_val(*pmd), domain);
 		}
 	}
 }
 
-static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start)
+static void walk_pud(struct pg_state *st, p4d_t *p4d, unsigned long start)
 {
-	pud_t *pud = pud_offset(pgd, 0);
+	pud_t *pud = pud_offset(p4d, 0);
 	unsigned long addr;
 	unsigned i;
 
@@ -366,7 +367,23 @@ static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start)
 		if (!pud_none(*pud)) {
 			walk_pmd(st, pud, addr);
 		} else {
-			note_page(st, addr, 2, pud_val(*pud), NULL);
+			note_page(st, addr, 3, pud_val(*pud), NULL);
+		}
+	}
+}
+
+static void walk_p4d(struct pg_state *st, pgd_t *pgd, unsigned long start)
+{
+	p4d_t *p4d = p4d_offset(pgd, 0);
+	unsigned long addr;
+	unsigned i;
+
+	for (i = 0; i < PTRS_PER_P4D; i++, p4d++) {
+		addr = start + i * P4D_SIZE;
+		if (!p4d_none(*p4d)) {
+			walk_pud(st, p4d, addr);
+		} else {
+			note_page(st, addr, 2, p4d_val(*p4d), NULL);
 		}
 	}
 }
@@ -381,7 +398,7 @@ static void walk_pgd(struct pg_state *st, struct mm_struct *mm,
 	for (i = 0; i < PTRS_PER_PGD; i++, pgd++) {
 		addr = start + i * PGDIR_SIZE;
 		if (!pgd_none(*pgd)) {
-			walk_pud(st, pgd, addr);
+			walk_p4d(st, pgd, addr);
 		} else {
 			note_page(st, addr, 1, pgd_val(*pgd), NULL);
 		}
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index ae857f41f68d..489aaafa6ebd 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -91,6 +91,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
 {
 	spinlock_t *ptl;
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -100,7 +101,11 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
 	if (pgd_none_or_clear_bad(pgd))
 		return 0;
 
-	pud = pud_offset(pgd, address);
+	p4d = p4d_offset(pgd, address);
+	if (p4d_none_or_clear_bad(p4d))
+		return 0;
+
+	pud = pud_offset(p4d, address);
 	if (pud_none_or_clear_bad(pud))
 		return 0;
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 2dd5c41cbb8d..ff230e9affc4 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -43,19 +43,21 @@ void show_pte(const char *lvl, struct mm_struct *mm, unsigned long addr)
 	printk("%s[%08lx] *pgd=%08llx", lvl, addr, (long long)pgd_val(*pgd));
 
 	do {
+		p4d_t *p4d;
 		pud_t *pud;
 		pmd_t *pmd;
 		pte_t *pte;
 
-		if (pgd_none(*pgd))
+		p4d = p4d_offset(pgd, addr);
+		if (p4d_none(*p4d))
 			break;
 
-		if (pgd_bad(*pgd)) {
+		if (p4d_bad(*p4d)) {
 			pr_cont("(bad)");
 			break;
 		}
 
-		pud = pud_offset(pgd, addr);
+		pud = pud_offset(p4d, addr);
 		if (PTRS_PER_PUD != 1)
 			pr_cont(", *pud=%08llx", (long long)pud_val(*pud));
 
@@ -405,6 +407,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 {
 	unsigned int index;
 	pgd_t *pgd, *pgd_k;
+	p4d_t *p4d, *p4d_k;
 	pud_t *pud, *pud_k;
 	pmd_t *pmd, *pmd_k;
 
@@ -419,13 +422,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	pgd = cpu_get_pgd() + index;
 	pgd_k = init_mm.pgd + index;
 
-	if (pgd_none(*pgd_k))
+	p4d = p4d_offset(pgd, addr);
+	p4d_k = p4d_offset(pgd_k, addr);
+
+	if (p4d_none(*p4d_k))
 		goto bad_area;
-	if (!pgd_present(*pgd))
-		set_pgd(pgd, *pgd_k);
+	if (!p4d_present(*p4d))
+		set_p4d(p4d, *p4d_k);
 
-	pud = pud_offset(pgd, addr);
-	pud_k = pud_offset(pgd_k, addr);
+	pud = pud_offset(p4d, addr);
+	pud_k = pud_offset(p4d_k, addr);
 
 	if (pud_none(*pud_k))
 		goto bad_area;
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index a033f6134a64..cd54411ef1b8 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -68,7 +68,8 @@ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
 static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
 	unsigned long prot)
 {
-	pud_t *pud = pud_offset(pgd, addr);
+	p4d_t *p4d = p4d_offset(pgd, addr);
+	pud_t *pud = pud_offset(p4d, addr);
 	unsigned long next;
 
 	do {
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 054be44d1cdb..2de1e757d54f 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -92,18 +92,6 @@ EXPORT_SYMBOL(arm_dma_zone_size);
  */
 phys_addr_t arm_dma_limit;
 unsigned long arm_dma_pfn_limit;
-
-static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
-	unsigned long dma_size)
-{
-	if (size[0] <= dma_size)
-		return;
-
-	size[ZONE_NORMAL] = size[0] - dma_size;
-	size[ZONE_DMA] = dma_size;
-	hole[ZONE_NORMAL] = hole[0];
-	hole[ZONE_DMA] = 0;
-}
 #endif
 
 void __init setup_dma_zone(const struct machine_desc *mdesc)
@@ -121,56 +109,16 @@ void __init setup_dma_zone(const struct machine_desc *mdesc)
 static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 	unsigned long max_high)
 {
-	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	struct memblock_region *reg;
-
-	/*
-	 * initialise the zones.
-	 */
-	memset(zone_size, 0, sizeof(zone_size));
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
-	/*
-	 * The memory size has already been determined.  If we need
-	 * to do anything fancy with the allocation of this memory
-	 * to the zones, now is the time to do it.
-	 */
-	zone_size[0] = max_low - min;
-#ifdef CONFIG_HIGHMEM
-	zone_size[ZONE_HIGHMEM] = max_high - max_low;
+#ifdef CONFIG_ZONE_DMA
+	max_zone_pfn[ZONE_DMA] = min(arm_dma_pfn_limit, max_low);
 #endif
-
-	/*
-	 * Calculate the size of the holes.
-	 *  holes = node_size - sum(bank_sizes)
-	 */
-	memcpy(zhole_size, zone_size, sizeof(zhole_size));
-	for_each_memblock(memory, reg) {
-		unsigned long start = memblock_region_memory_base_pfn(reg);
-		unsigned long end = memblock_region_memory_end_pfn(reg);
-
-		if (start < max_low) {
-			unsigned long low_end = min(end, max_low);
-			zhole_size[0] -= low_end - start;
-		}
+	max_zone_pfn[ZONE_NORMAL] = max_low;
 #ifdef CONFIG_HIGHMEM
-		if (end > max_low) {
-			unsigned long high_start = max(start, max_low);
-			zhole_size[ZONE_HIGHMEM] -= end - high_start;
-		}
+	max_zone_pfn[ZONE_HIGHMEM] = max_high;
 #endif
-	}
-
-#ifdef CONFIG_ZONE_DMA
-	/*
-	 * Adjust the sizes according to any special requirements for
-	 * this machine type.
-	 */
-	if (arm_dma_zone_size)
-		arm_adjust_dma_zone(zone_size, zhole_size,
-			arm_dma_zone_size >> PAGE_SHIFT);
-#endif
-
-	free_area_init_node(0, zone_size, min, zhole_size);
+	free_area_init(max_zone_pfn);
 }
 
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
@@ -306,7 +254,7 @@ void __init bootmem_init(void)
 	sparse_init();
 
 	/*
-	 * Now free the memory - free_area_init_node needs
+	 * Now free the memory - free_area_init needs
 	 * the sparse mem_map arrays initialized by sparse_init()
 	 * for memmap_init_zone(), otherwise all PFNs are invalid.
 	 */
@@ -571,7 +519,7 @@ static inline void section_update(unsigned long addr, pmdval_t mask,
 {
 	pmd_t *pmd;
 
-	pmd = pmd_offset(pud_offset(pgd_offset(mm, addr), addr), addr);
+	pmd = pmd_off_k(addr);
 
 #ifdef CONFIG_ARM_LPAE
 	pmd[0] = __pmd((pmd_val(pmd[0]) & mask) | prot);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 72286f9a4d30..75529d76d28c 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -142,12 +142,14 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
 {
 	unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmdp;
 
 	flush_cache_vunmap(addr, end);
 	pgd = pgd_offset_k(addr);
-	pud = pud_offset(pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	pud = pud_offset(p4d, addr);
 	pmdp = pmd_offset(pud, addr);
 	do {
 		pmd_t pmd = *pmdp;
@@ -190,6 +192,7 @@ remap_area_sections(unsigned long virt, unsigned long pfn,
 {
 	unsigned long addr = virt, end = virt + size;
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 
@@ -200,7 +203,8 @@ remap_area_sections(unsigned long virt, unsigned long pfn,
 	unmap_area_sections(virt, size);
 
 	pgd = pgd_offset_k(addr);
-	pud = pud_offset(pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	pud = pud_offset(p4d, addr);
 	pmd = pmd_offset(pud, addr);
 	do {
 		pmd[0] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
@@ -222,6 +226,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
 {
 	unsigned long addr = virt, end = virt + size;
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 
@@ -232,7 +237,8 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
 	unmap_area_sections(virt, size);
 
 	pgd = pgd_offset_k(virt);
-	pud = pud_offset(pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	pud = pud_offset(p4d, addr);
 	pmd = pmd_offset(pud, addr);
 	do {
 		unsigned long super_pmd_val, i;
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 88c121ac14b3..4f1f72b75890 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -38,7 +38,7 @@ static inline pte_t get_top_pte(unsigned long va)
 
 static inline pmd_t *pmd_off_k(unsigned long virt)
 {
-	return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
+	return pmd_offset(pud_offset(p4d_offset(pgd_offset_k(virt), virt), virt), virt);
 }
 
 struct mem_type {
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ec8d0008bfa1..c425288f1a86 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -357,7 +357,8 @@ static pte_t *pte_offset_late_fixmap(pmd_t *dir, unsigned long addr)
 static inline pmd_t * __init fixmap_pmd(unsigned long addr)
 {
 	pgd_t *pgd = pgd_offset_k(addr);
-	pud_t *pud = pud_offset(pgd, addr);
+	p4d_t *p4d = p4d_offset(pgd, addr);
+	pud_t *pud = pud_offset(p4d, addr);
 	pmd_t *pmd = pmd_offset(pud, addr);
 
 	return pmd;
@@ -801,12 +802,12 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 	} while (pmd++, addr = next, addr != end);
 }
 
-static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
+static void __init alloc_init_pud(p4d_t *p4d, unsigned long addr,
 				  unsigned long end, phys_addr_t phys,
 				  const struct mem_type *type,
 				  void *(*alloc)(unsigned long sz), bool ng)
 {
-	pud_t *pud = pud_offset(pgd, addr);
+	pud_t *pud = pud_offset(p4d, addr);
 	unsigned long next;
 
 	do {
@@ -816,6 +817,21 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 	} while (pud++, addr = next, addr != end);
 }
 
+static void __init alloc_init_p4d(pgd_t *pgd, unsigned long addr,
+				  unsigned long end, phys_addr_t phys,
+				  const struct mem_type *type,
+				  void *(*alloc)(unsigned long sz), bool ng)
+{
+	p4d_t *p4d = p4d_offset(pgd, addr);
+	unsigned long next;
+
+	do {
+		next = p4d_addr_end(addr, end);
+		alloc_init_pud(p4d, addr, next, phys, type, alloc, ng);
+		phys += next - addr;
+	} while (p4d++, addr = next, addr != end);
+}
+
 #ifndef CONFIG_ARM_LPAE
 static void __init create_36bit_mapping(struct mm_struct *mm,
 					struct map_desc *md,
@@ -863,7 +879,8 @@ static void __init create_36bit_mapping(struct mm_struct *mm,
 	pgd = pgd_offset(mm, addr);
 	end = addr + length;
 	do {
-		pud_t *pud = pud_offset(pgd, addr);
+		p4d_t *p4d = p4d_offset(pgd, addr);
+		pud_t *pud = pud_offset(p4d, addr);
 		pmd_t *pmd = pmd_offset(pud, addr);
 		int i;
 
@@ -914,7 +931,7 @@ static void __init __create_mapping(struct mm_struct *mm, struct map_desc *md,
 	do {
 		unsigned long next = pgd_addr_end(addr, end);
 
-		alloc_init_pud(pgd, addr, next, phys, type, alloc, ng);
+		alloc_init_p4d(pgd, addr, next, phys, type, alloc, ng);
 
 		phys += next - addr;
 		addr = next;
@@ -950,7 +967,13 @@ void __init create_mapping_late(struct mm_struct *mm, struct map_desc *md,
 				bool ng)
 {
 #ifdef CONFIG_ARM_LPAE
-	pud_t *pud = pud_alloc(mm, pgd_offset(mm, md->virtual), md->virtual);
+	p4d_t *p4d;
+	pud_t *pud;
+
+	p4d = p4d_alloc(mm, pgd_offset(mm, md->virtual), md->virtual);
+	if (!WARN_ON(!p4d))
+		return;
+	pud = pud_alloc(mm, p4d, md->virtual);
 	if (WARN_ON(!pud))
 		return;
 	pmd_alloc(mm, pud, 0);
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index 478bd2c6aa50..c5e1b27046a8 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -30,6 +30,7 @@
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *new_pgd, *init_pgd;
+	p4d_t *new_p4d, *init_p4d;
 	pud_t *new_pud, *init_pud;
 	pmd_t *new_pmd, *init_pmd;
 	pte_t *new_pte, *init_pte;
@@ -53,8 +54,12 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 	/*
 	 * Allocate PMD table for modules and pkmap mappings.
 	 */
-	new_pud = pud_alloc(mm, new_pgd + pgd_index(MODULES_VADDR),
+	new_p4d = p4d_alloc(mm, new_pgd + pgd_index(MODULES_VADDR),
 			    MODULES_VADDR);
+	if (!new_p4d)
+		goto no_p4d;
+
+	new_pud = pud_alloc(mm, new_p4d, MODULES_VADDR);
 	if (!new_pud)
 		goto no_pud;
 
@@ -69,7 +74,11 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 		 * contains the machine vectors. The vectors are always high
 		 * with LPAE.
 		 */
-		new_pud = pud_alloc(mm, new_pgd, 0);
+		new_p4d = p4d_alloc(mm, new_pgd, 0);
+		if (!new_p4d)
+			goto no_p4d;
+
+		new_pud = pud_alloc(mm, new_p4d, 0);
 		if (!new_pud)
 			goto no_pud;
 
@@ -91,7 +100,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 		pmd_val(*new_pmd) |= PMD_DOMAIN(DOMAIN_VECTORS);
 #endif
 
-		init_pud = pud_offset(init_pgd, 0);
+		init_p4d = p4d_offset(init_pgd, 0);
+		init_pud = pud_offset(init_p4d, 0);
 		init_pmd = pmd_offset(init_pud, 0);
 		init_pte = pte_offset_map(init_pmd, 0);
 		set_pte_ext(new_pte + 0, init_pte[0], 0);
@@ -108,6 +118,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 no_pmd:
 	pud_free(mm, new_pud);
 no_pud:
+	p4d_free(mm, new_p4d);
+no_p4d:
 	__pgd_free(new_pgd);
 no_pgd:
 	return NULL;
@@ -116,6 +128,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 void pgd_free(struct mm_struct *mm, pgd_t *pgd_base)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pgtable_t pte;
@@ -127,7 +140,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base)
 	if (pgd_none_or_clear_bad(pgd))
 		goto no_pgd;
 
-	pud = pud_offset(pgd, 0);
+	p4d = p4d_offset(pgd, 0);
+	if (p4d_none_or_clear_bad(p4d))
+		goto no_p4d;
+
+	pud = pud_offset(p4d, 0);
 	if (pud_none_or_clear_bad(pud))
 		goto no_pud;
 
@@ -144,8 +161,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base)
 	pmd_free(mm, pmd);
 	mm_dec_nr_pmds(mm);
 no_pud:
-	pgd_clear(pgd);
+	p4d_clear(p4d);
 	pud_free(mm, pud);
+no_p4d:
+	pgd_clear(pgd);
+	p4d_free(mm, p4d);
 no_pgd:
 #ifdef CONFIG_ARM_LPAE
 	/*
@@ -156,15 +176,21 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base)
 			continue;
 		if (pgd_val(*pgd) & L_PGD_SWAPPER)
 			continue;
-		pud = pud_offset(pgd, 0);
+		p4d = p4d_offset(pgd, 0);
+		if (p4d_none_or_clear_bad(p4d))
+			continue;
+		pud = pud_offset(p4d, 0);
 		if (pud_none_or_clear_bad(pud))
 			continue;
 		pmd = pmd_offset(pud, 0);
 		pud_clear(pud);
 		pmd_free(mm, pmd);
 		mm_dec_nr_pmds(mm);
-		pgd_clear(pgd);
+		p4d_clear(p4d);
 		pud_free(mm, pud);
+		mm_dec_nr_puds(mm);
+		pgd_clear(pgd);
+		p4d_free(mm, p4d);
 	}
 #endif
 	__pgd_free(pgd_base);
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 4f7b27239bd4..55b1925f65d7 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -333,7 +333,6 @@ static int s3c_adc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct adc_device *adc;
-	struct resource *regs;
 	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
 	int ret;
 	unsigned tmp;
@@ -354,10 +353,8 @@ static int s3c_adc_probe(struct platform_device *pdev)
 	}
 
 	adc->irq = platform_get_irq(pdev, 1);
-	if (adc->irq <= 0) {
-		dev_err(dev, "failed to get adc irq\n");
+	if (adc->irq <= 0)
 		return -ENOENT;
-	}
 
 	ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev),
 				adc);
@@ -372,8 +369,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 		return PTR_ERR(adc->clk);
 	}
 
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	adc->regs = devm_ioremap_resource(dev, regs);
+	adc->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(adc->regs))
 		return PTR_ERR(adc->regs);
 
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index 4d1cf74a2caa..54c2719fec46 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -451,3 +451,4 @@
 435	common	clone3				sys_clone3
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
+439	common	process_madvise			sys_process_madvise
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 40fb05d96c60..4b256fa6db7a 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -9,7 +9,10 @@ config ARM64
 	select ACPI_MCFG if (ACPI && PCI)
 	select ACPI_SPCR_TABLE if ACPI
 	select ACPI_PPTT if ACPI
+	select ARCH_BINFMT_ELF_STATE
+	select ARCH_HAS_DEBUG_WX
 	select ARCH_HAS_DEBUG_VIRTUAL
+	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
@@ -32,6 +35,7 @@ config ARM64
 	select ARCH_HAS_SYSCALL_WRAPPER
 	select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+	select ARCH_HAVE_ELF_PROT
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_INLINE_READ_LOCK if !PREEMPTION
 	select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
@@ -61,6 +65,7 @@ config ARM64
 	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION
 	select ARCH_KEEP_MEMBLOCK
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_GNU_PROPERTY
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
 	select ARCH_SUPPORTS_MEMORY_FAILURE
@@ -156,7 +161,6 @@ config ARM64
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IRQ_TIME_ACCOUNTING
-	select HAVE_MEMBLOCK_NODE_MAP if NUMA
 	select HAVE_NMI
 	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
@@ -1584,6 +1588,28 @@ endmenu
 
 menu "ARMv8.5 architectural features"
 
+config ARM64_BTI
+	bool "Branch Target Identification support"
+	default y
+	help
+	  Branch Target Identification (part of the ARMv8.5 Extensions)
+	  provides a mechanism to limit the set of locations to which computed
+	  branch instructions such as BR or BLR can jump.
+
+	  To make use of BTI on CPUs that support it, say Y.
+
+	  BTI is intended to provide complementary protection to other control
+	  flow integrity protection mechanisms, such as the Pointer
+	  authentication mechanism provided as part of the ARMv8.3 Extensions.
+	  For this reason, it does not make sense to enable this option without
+	  also enabling support for pointer authentication.  Thus, when
+	  enabling this option you should also select ARM64_PTR_AUTH=y.
+
+	  Userspace binaries must also be specifically compiled to make use of
+	  this mechanism.  If you say N here or the hardware does not support
+	  BTI, such binaries can still run, but you get no additional
+	  enforcement of branch destinations.
+
 config ARM64_E0PD
 	bool "Enable support for E0PD"
 	default y
@@ -1785,7 +1811,7 @@ config EFI
 	select EFI_PARAMS_FROM_FDT
 	select EFI_RUNTIME_WRAPPERS
 	select EFI_STUB
-	select EFI_ARMSTUB
+	select EFI_GENERIC_STUB
 	default y
 	help
 	  This option provides support for runtime services provided
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index a1efa246c9ed..cdf7ec0b975e 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -23,35 +23,6 @@ config ARM64_RANDOMIZE_TEXT_OFFSET
 	  of TEXT_OFFSET and platforms must not require a specific
 	  value.
 
-config DEBUG_WX
-	bool "Warn on W+X mappings at boot"
-	select PTDUMP_CORE
-	---help---
-	  Generate a warning if any W+X mappings are found at boot.
-
-	  This is useful for discovering cases where the kernel is leaving
-	  W+X mappings after applying NX, as such mappings are a security risk.
-	  This check also includes UXN, which should be set on all kernel
-	  mappings.
-
-	  Look for a message in dmesg output like this:
-
-	    arm64/mm: Checked W+X mappings: passed, no W+X pages found.
-
-	  or like this, if the check failed:
-
-	    arm64/mm: Checked W+X mappings: FAILED, <N> W+X pages found.
-
-	  Note that even if the check fails, your kernel is possibly
-	  still fine, as W+X mappings are not a security hole in
-	  themselves, what they do is that they make the exploitation
-	  of other unfixed kernel bugs easier.
-
-	  There is no runtime or memory usage effect of this option
-	  once the kernel has booted up - it's a one time check.
-
-	  If in doubt, say "Y".
-
 config DEBUG_EFI
 	depends on EFI && DEBUG_INFO
 	bool "UEFI debugging"
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 85e4149cc5d5..e48867c335d2 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -12,7 +12,6 @@
 
 LDFLAGS_vmlinux	:=--no-undefined -X
 CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
-GZFLAGS		:=-9
 
 ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
@@ -118,7 +117,7 @@ TEXT_OFFSET := $(shell awk "BEGIN {srand(); printf \"0x%06x\n\", \
 		 int(2 * 1024 * 1024 / (2 ^ $(CONFIG_ARM64_PAGE_SHIFT)) * \
 		 rand()) * (2 ^ $(CONFIG_ARM64_PAGE_SHIFT))}")
 else
-TEXT_OFFSET := 0x00080000
+TEXT_OFFSET := 0x0
 endif
 
 ifeq ($(CONFIG_KASAN_SW_TAGS), y)
@@ -131,7 +130,7 @@ KBUILD_CFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
 KBUILD_CPPFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
 KBUILD_AFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
 
-export	TEXT_OFFSET GZFLAGS
+export	TEXT_OFFSET
 
 core-y		+= arch/arm64/
 libs-y		:= arch/arm64/lib/ $(libs-y)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 5fa9ca0191a8..f3f8e177ab61 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -32,6 +32,15 @@ hdmi_con_in: endpoint {
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "a64-olinuxino:red:user";
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+	};
+
 	reg_usb1_vbus: usb1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1-vbus";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 31143fe64d91..ddd34183d5e4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -557,6 +557,16 @@ crypto: crypto@1c15000 {
 			resets = <&ccu RST_BUS_CE>;
 		};
 
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun50i-a64-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
 		usb_otg: usb@1c19000 {
 			compatible = "allwinner,sun8i-a33-musb";
 			reg = <0x01c19000 0x0400>;
@@ -1083,6 +1093,8 @@ mbus: dram-controller@1c62000 {
 			compatible = "allwinner,sun50i-a64-mbus";
 			reg = <0x01c62000 0x1000>;
 			clocks = <&ccu 112>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
 			#interconnect-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 8f09d209359b..3f7ceeb1a767 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -77,6 +78,10 @@ spdif_out: spdif-out {
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
 &de {
 	status = "okay";
 };
@@ -234,7 +239,8 @@ reg_cldo3: cldo3 {
 			reg_dcdca: dcdca {
 				regulator-always-on;
 				regulator-min-microvolt = <810000>;
-				regulator-max-microvolt = <1080000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-cpu";
 			};
 
@@ -242,6 +248,7 @@ reg_dcdcc: dcdcc {
 				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-gpu";
 			};
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
new file mode 100644
index 000000000000..dcb789519797
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+// Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>
+
+/ {
+	cpu_opp_table: cpu-opp-table {
+		compatible = "allwinner,sun50i-h6-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp@480000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <480000000>;
+
+			opp-microvolt-speed0 = <880000>;
+			opp-microvolt-speed1 = <820000>;
+			opp-microvolt-speed2 = <820000>;
+		};
+
+		opp@720000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <720000000>;
+
+			opp-microvolt-speed0 = <880000>;
+			opp-microvolt-speed1 = <820000>;
+			opp-microvolt-speed2 = <820000>;
+		};
+
+		opp@816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <880000>;
+			opp-microvolt-speed1 = <820000>;
+			opp-microvolt-speed2 = <820000>;
+		};
+
+		opp@888000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <888000000>;
+
+			opp-microvolt-speed0 = <880000>;
+			opp-microvolt-speed1 = <820000>;
+			opp-microvolt-speed2 = <820000>;
+		};
+
+		opp@1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <940000>;
+			opp-microvolt-speed1 = <880000>;
+			opp-microvolt-speed2 = <880000>;
+		};
+
+		opp@1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1000000>;
+			opp-microvolt-speed1 = <940000>;
+			opp-microvolt-speed2 = <940000>;
+		};
+
+		opp@1488000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1488000000>;
+
+			opp-microvolt-speed0 = <1060000>;
+			opp-microvolt-speed1 = <1000000>;
+			opp-microvolt-speed2 = <1000000>;
+		};
+
+		opp@1608000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1608000000>;
+
+			opp-microvolt-speed0 = <1090000>;
+			opp-microvolt-speed1 = <1030000>;
+			opp-microvolt-speed2 = <1030000>;
+		};
+
+		opp@1704000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1704000000>;
+
+			opp-microvolt-speed0 = <1120000>;
+			opp-microvolt-speed1 = <1060000>;
+			opp-microvolt-speed2 = <1060000>;
+		};
+
+		opp@1800000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1800000000>;
+
+			opp-microvolt-speed0 = <1160000>;
+			opp-microvolt-speed1 = <1100000>;
+			opp-microvolt-speed2 = <1100000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 47f579610dcc..15c9dd8c4479 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -257,6 +258,7 @@ reg_dcdca: dcdca {
 				regulator-always-on;
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-cpu";
 			};
 
@@ -264,6 +266,7 @@ reg_dcdcc: dcdcc {
 				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-gpu";
 			};
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
index e7ca75c0d0f7..e8770858b5d0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -6,4 +6,69 @@
 / {
 	model = "OrangePi Lite2";
 	compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6";
+
+	aliases {
+		serial1 = &uart1; /* BT-UART */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_cldo2>;
+	vqmmc-supply = <&reg_bldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcm: sdio-wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>;	/* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&reg_cldo2 {
+	/*
+	 * This regulator is connected with CLDO3.
+	 * Before the kernel can support synchronized
+	 * enable of coupled regulators, keep them
+	 * both always on as a ugly hack.
+	 */
+	regulator-always-on;
+};
+
+&reg_cldo3 {
+	/*
+	 * This regulator is connected with CLDO2.
+	 * See the comments for CLDO2.
+	 */
+	regulator-always-on;
+};
+
+/* There's the BT part of the AP6255 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 9287976c4a50..ebc120a9232f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -106,6 +106,12 @@ &ohci3 {
 	status = "okay";
 };
 
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
 &r_i2c {
 	status = "okay";
 
@@ -230,6 +236,10 @@ &r_ir {
 	status = "okay";
 };
 
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
@@ -241,7 +251,12 @@ &uart0 {
 };
 
 &usb2otg {
-	dr_mode = "otg";
+	/*
+	 * OrangePi Lite 2 and One Plus, where this DT is used, don't
+	 * have a controllable VBUS even though they do have an ID pin.
+	 * Using it as anything but a USB host is unsafe.
+	 */
+	dr_mode = "host";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index b0642d841933..af85b2074867 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -80,6 +81,22 @@ reg_usb_vbus: vbus {
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
@@ -91,17 +108,6 @@ &emac {
 	status = "okay";
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&de {
-	status = "okay";
-};
-
 &gpu {
 	mali-supply = <&reg_dcdcc>;
 	status = "okay";
@@ -117,12 +123,11 @@ hdmi_out_con: endpoint {
 	};
 };
 
-&ehci0 {
-	status = "okay";
-};
-
-&ehci3 {
-	status = "okay";
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
 };
 
 &mmc0 {
@@ -238,7 +243,8 @@ reg_cldo3: cldo3 {
 			reg_dcdca: dcdca {
 				regulator-always-on;
 				regulator-min-microvolt = <810000>;
-				regulator-max-microvolt = <1080000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-cpu";
 			};
 
@@ -246,6 +252,7 @@ reg_dcdcc: dcdcc {
 				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-gpu";
 			};
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index 83e6cb0e59ce..be81330db14f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -37,6 +38,17 @@ reg_vcc3v3: vcc3v3 {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	reg_vdd_cpu_gpu: vdd-cpu-gpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-gpu";
+		regulator-min-microvolt = <1135000>;
+		regulator-max-microvolt = <1135000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu_gpu>;
 };
 
 &de {
@@ -56,6 +68,7 @@ &ehci3 {
 };
 
 &gpu {
+	mali-supply = <&reg_vdd_cpu_gpu>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index b9ab7d8fa8af..2e31632c6ca8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -25,6 +25,9 @@ cpu0: cpu@0 {
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -32,6 +35,9 @@ cpu1: cpu@1 {
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -39,6 +45,9 @@ cpu2: cpu@2 {
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -46,6 +55,9 @@ cpu3: cpu@3 {
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -231,6 +243,16 @@ dma: dma-controller@3002000 {
 			#dma-cells = <1>;
 		};
 
+		msgbox: mailbox@3003000 {
+			compatible = "allwinner,sun50i-h6-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x03003000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
 		sid: efuse@3006000 {
 			compatible = "allwinner,sun50i-h6-sid";
 			reg = <0x03006000 0x400>;
@@ -240,6 +262,10 @@ sid: efuse@3006000 {
 			ths_calibration: thermal-sensor-calibration@14 {
 				reg = <0x14 0x8>;
 			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x4>;
+			};
 		};
 
 		watchdog: watchdog@30090a0 {
@@ -946,6 +972,30 @@ cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu-thermal {
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index aace3d32a3df..8e6281c685fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1735,18 +1735,18 @@ sd_emmc_c: mmc@7000 {
 		};
 
 		sram: sram@fffc0000 {
-			compatible = "amlogic,meson-axg-sram", "mmio-sram";
+			compatible = "mmio-sram";
 			reg = <0x0 0xfffc0000 0x0 0x20000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0xfffc0000 0x20000>;
 
-			cpu_scp_lpri: scp-shmem@13000 {
+			cpu_scp_lpri: scp-sram@13000 {
 				compatible = "amlogic,meson-axg-scp-shmem";
 				reg = <0x13000 0x400>;
 			};
 
-			cpu_scp_hpri: scp-shmem@13400 {
+			cpu_scp_hpri: scp-sram@13400 {
 				compatible = "amlogic,meson-axg-scp-shmem";
 				reg = <0x13400 0x400>;
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 0882ea215b88..c0aef7d69117 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2319,7 +2319,7 @@ dwc2: usb@ff400000 {
 				reg = <0x0 0xff400000 0x0 0x40000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-				clock-names = "ddr";
+				clock-names = "otg";
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
 				dr_mode = "peripheral";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 783e5a397f86..55d39020ec72 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -1,4 +1,3 @@
-
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2019 BayLibre, SAS
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index c33e85fbdaba..224c890d32d3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -51,11 +51,11 @@ vddcpu_b: regulator-vddcpu-b {
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "G12B-KHADAS-VIM3";
-		audio-aux-devs = <&tdmout_b>;
-		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
-				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
-				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
-				"TDM_B Playback", "TDMOUT_B OUT";
+		audio-aux-devs = <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -80,7 +80,7 @@ dai-link-2 {
 
 		/* 8ch hdmi interface */
 		dai-link-3 {
-			sound-dai = <&tdmif_b>;
+			sound-dai = <&tdmif_a>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-0 = <1 1>;
 			dai-tdm-slot-tx-mask-1 = <1 1>;
@@ -89,7 +89,7 @@ dai-link-3 {
 			mclk-fs = <256>;
 
 			codec {
-				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
 			};
 		};
 
@@ -154,6 +154,10 @@ &cpu103 {
 	clock-latency = <50000>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
 &frddr_b {
 	status = "okay";
 };
@@ -178,11 +182,11 @@ &pwm_AO_cd {
 	status = "okay";
 };
 
-&tdmif_b {
+&tdmif_a {
 	status = "okay";
 };
 
-&tdmout_b {
+&tdmout_a {
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 046cc332d07f..1e5d0ee5d541 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -65,6 +65,11 @@ opp-1896000000 {
 			opp-hz = /bits/ 64 <1896000000>;
 			opp-microvolt = <981000>;
 		};
+
+		opp-1992000000 {
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1001000>;
+		};
 	};
 
 	cpub_opp_table_1: opp-table-1 {
@@ -120,5 +125,15 @@ opp-1704000000 {
 			opp-hz = /bits/ 64 <1704000000>;
 			opp-microvolt = <891000>;
 		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <981000>;
+		};
+
+		opp-1908000000 {
+			opp-hz = /bits/ 64 <1908000000>;
+			opp-microvolt = <1022000>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index 325e448eb09c..fdaacfd96b97 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -14,7 +14,7 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
-	compatible = "ugoos,am6", "amlogic,g12b";
+	compatible = "ugoos,am6", "amlogic,s922x", "amlogic,g12b";
 	model = "Ugoos AM6";
 
 	aliases {
@@ -545,7 +545,7 @@ &uart_AO {
 &usb {
 	status = "okay";
 	dr_mode = "host";
-	vbus-regulator = <&usb_pwr_en>;
+	vbus-supply = <&usb_pwr_en>;
 };
 
 &usb2_phy0 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index 248b018c83d5..c47d96067203 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -96,14 +96,14 @@ dc_in: regulator-dc_in {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-green {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_DISK_ACTIVITY;
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 		};
 
-		blue {
+		led-blue {
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
@@ -360,8 +360,9 @@ &uart_AO {
 	status = "okay";
 };
 
-&usb0 {
+&usb {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &usb2_phy0 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 12d5e333e5f2..d853981f1ab5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -223,6 +223,7 @@ &uart_AO {
 	pinctrl-names = "default";
 };
 
-&usb0 {
+&usb {
 	status = "okay";
+	dr_mode = "otg";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 03f79fe045b7..e2bb68ec8502 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -398,20 +398,20 @@ gic: interrupt-controller@c4301000 {
 		};
 
 		sram: sram@c8000000 {
-			compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
+			compatible = "mmio-sram";
 			reg = <0x0 0xc8000000 0x0 0x14000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0xc8000000 0x14000>;
 
-			cpu_scp_lpri: scp-shmem@0 {
-				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
+			cpu_scp_lpri: scp-sram@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13000 0x400>;
 			};
 
-			cpu_scp_hpri: scp-shmem@200 {
-				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
+			cpu_scp_hpri: scp-sram@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13400 0x400>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 6c9cc45fb417..e8394a8269ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -11,7 +11,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 / {
-	compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
+	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
 
 	leds {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index d6ca684e0e61..7be3e354093b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -29,7 +29,7 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		stat {
+		led-stat {
 			label = "nanopi-k2:blue:stat";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 65ec7dea828c..67d901ed2fa3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -31,7 +31,7 @@ memory@0 {
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "a95x:system-status";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index b46ef985bb44..70fcfb7b0683 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -49,7 +49,7 @@ usb_otg_pwr: regulator-usb-pwrs {
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "c2:blue:alive";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 45cb83625951..222ee8069cfa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -20,7 +20,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "vega-s95:blue:on";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index 1d32d1f6d032..2ab8a3d10079 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -14,13 +14,13 @@ / {
 	model = "WeTek Play 2";
 
 	leds {
-		wifi {
+		led-wifi {
 			label = "wetek-play:wifi-status";
 			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		ethernet {
+		led-ethernet {
 			label = "wetek-play:ethernet-status";
 			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index dee51cf95223..d6133af09d64 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -25,7 +25,7 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		system {
+		led-system {
 			label = "wetek-play:system-status";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
index 4d5949496596..2cfea3094f6c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -243,6 +243,7 @@ &uart_AO {
 	pinctrl-names = "default";
 };
 
-&usb0 {
+&usb {
 	status = "okay";
+	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index a1119cfb0280..867e30f1d62b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -216,6 +216,7 @@ &uart_AO {
 	pinctrl-names = "default";
 };
 
-&usb0 {
+&usb {
 	status = "okay";
+	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
index b5667f1fb2c8..9ef210f17b4a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -29,3 +29,7 @@ status {
 &cvbs_vdac_port {
 	status = "disabled";
 };
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
index 6509c4950950..ecc9df7ca023 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
@@ -20,3 +20,7 @@ memory@0 {
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 };
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
index dd729ac2300d..6705c2082a78 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
@@ -24,3 +24,7 @@ memory@0 {
 &ir {
 	linux,rc-map-name = "rc-tanix-tx3mini";
 };
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 440bc23c7342..8bcdffdf55d0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -207,3 +207,7 @@ &uart_AO_B {
 	pinctrl-0 = <&uart_ao_b_pins>;
 	pinctrl-names = "default";
 };
+
+&usb {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index e8348b2728db..297901b20aa0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -54,14 +54,14 @@ hdmi_connector_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		system {
+		led-system {
 			label = "librecomputer:system-status";
 			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			panic-indicator;
 		};
 
-		blue {
+		led-blue {
 			label = "librecomputer:blue";
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -272,8 +272,9 @@ &uart_AO {
 	pinctrl-names = "default";
 };
 
-&usb0 {
+&usb {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &usb2_phy0 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 62dd87821ce5..f1acca5c4434 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -218,6 +218,7 @@ &uart_AO {
 	pinctrl-names = "default";
 };
 
-&usb0 {
+&usb {
 	status = "okay";
+	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index 6ac678f88bd8..05cb2f5e5c36 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -195,8 +195,9 @@ &uart_AO {
 	pinctrl-names = "default";
 };
 
-&usb0 {
+&usb {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &usb2_phy0 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 259d86399390..95b301a7c725 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -14,26 +14,43 @@ / {
 	compatible = "amlogic,meson-gxl";
 
 	soc {
-		usb0: usb@c9000000 {
-			status = "disabled";
-			compatible = "amlogic,meson-gxl-dwc3";
+		usb: usb@d0078080 {
+			compatible = "amlogic,meson-gxl-usb-ctrl";
+			reg = <0x0 0xd0078080 0x0 0x20>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 
-			clocks = <&clkc CLKID_USB>;
-			clock-names = "usb_general";
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "usb_ctrl", "ddr";
 			resets = <&reset RESET_USB_OTG>;
-			reset-names = "usb_otg";
 
-			dwc3: dwc3@c9000000 {
+			dr_mode = "otg";
+
+			phys = <&usb2_phy0>, <&usb2_phy1>;
+			phy-names = "usb2-phy0", "usb2-phy1";
+
+			dwc2: usb@c9100000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xc9100000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@c9000000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0xc9000000 0x0 0x100000>;
 				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				maximum-speed = "high-speed";
 				snps,dis_u2_susphy_quirk;
-				phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>;
 			};
 		};
 
@@ -71,18 +88,6 @@ usb2_phy1: phy@78020 {
 		reset-names = "phy";
 		status = "okay";
 	};
-
-	usb3_phy: phy@78080 {
-		compatible = "amlogic,meson-gxl-usb3-phy";
-		#phy-cells = <0>;
-		reg = <0x0 0x78080 0x0 0x20>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clkc CLKID_USB>, <&clkc_AO CLKID_AO_CEC_32K>;
-		clock-names = "phy", "peripheral";
-		resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>;
-		reset-names = "phy", "peripheral";
-		status = "okay";
-	};
 };
 
 &efuse {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 27eeab71ec77..bff8ec2c1c70 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -380,6 +380,7 @@ &saradc {
 	vref-supply = <&vddio_ao18>;
 };
 
-&usb0 {
+&usb {
 	status = "okay";
+	dr_mode = "peripheral";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index c2bd4dbbf38c..83eca3af44ce 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -179,6 +179,7 @@ &uart_AO {
 	pinctrl-names = "default";
 };
 
-&usb0 {
+&usb {
 	status = "okay";
+	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 420a88e9a195..c89c9f846fb1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -36,13 +36,13 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "rbox-pro:blue:on";
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		red {
+		led-red {
 			label = "rbox-pro:red:standby";
 			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
index 0bdf51d041ae..d3fdba4da9a6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
@@ -39,3 +39,7 @@ external_phy: ethernet-phy@0 {
 &ir {
 	linux,rc-map-name = "rc-vega-s9x";
 };
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index b6f89f108e28..40e3e123e05b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -169,8 +169,11 @@ &hdmi_tx {
 	compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
 };
 
-&dwc3 {
-	phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
+&usb {
+	compatible = "amlogic,meson-gxm-usb-ctrl";
+
+	phy-names = "usb2-phy0", "usb2-phy1", "usb2-phy2";
+	phys = <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
 };
 
 &vdec {
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 094ecf2222bb..1ef1e3672b96 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -39,13 +39,13 @@ button-function {
 	leds {
 		compatible = "gpio-leds";
 
-		white {
+		led-white {
 			label = "vim3:white:sys";
 			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		red {
+		led-red {
 			label = "vim3:red";
 			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index dfb2438851c0..5ab139a34c01 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -104,7 +104,7 @@ hdmi_connector_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		bluetooth {
+		led-bluetooth {
 			label = "sei610:blue:bt";
 			gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index f90c040fd5e8..67702667ed8a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -74,6 +74,21 @@ codec: sgtl5000@a {
 	};
 };
 
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
 &sai2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
index 8749634c55ee..6290e2f9de6a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
@@ -23,3 +23,18 @@ &duart0 {
 &i2c0 {
 	status = "okay";
 };
+
+&qspi {
+	status = "okay";
+
+	w25q16dw0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 2fb1cb1f7d8f..449475a97bf1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -128,6 +128,21 @@ codec: sgtl5000@a {
 	};
 };
 
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
 &sai2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index 5edb1e137a52..d45c17620b98 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -35,6 +35,21 @@ &i2c0 {
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 337919366dc8..006e544d1fdb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -137,6 +137,19 @@ soc {
 		#size-cells = <2>;
 		ranges;
 
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+			status = "disabled";
+		};
+
 		esdhc0: esdhc@1560000 {
 			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 2a7f70b71149..055f114cf848 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -298,6 +298,8 @@ dspi0: spi@2100000 {
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen 4 1>;
+			dmas = <&edma0 0 62>, <&edma0 0 60>;
+			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
 			little-endian;
 			status = "disabled";
@@ -311,6 +313,8 @@ dspi1: spi@2110000 {
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen 4 1>;
+			dmas = <&edma0 0 58>, <&edma0 0 56>;
+			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
 			little-endian;
 			status = "disabled";
@@ -324,6 +328,8 @@ dspi2: spi@2120000 {
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen 4 1>;
+			dmas = <&edma0 0 54>, <&edma0 0 2>;
+			dma-names = "tx", "rx";
 			spi-num-chipselects = <3>;
 			little-endian;
 			status = "disabled";
@@ -447,7 +453,7 @@ lpuart5: serial@22b0000 {
 
 		edma0: dma-controller@22c0000 {
 			#dma-cells = <2>;
-			compatible = "fsl,ls1028a-edma";
+			compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
 			reg = <0x0 0x22c0000 0x0 0x10000>,
 			      <0x0 0x22d0000 0x0 0x10000>,
 			      <0x0 0x22e0000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index ae1b113ab162..abaeb587de48 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -436,19 +436,19 @@ sysclk: sysclk {
 	};
 
 	thermal-zones {
-		core_thermal1: core-thermal1 {
+		cluster6-7 {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
 
 			trips {
-				core_cluster_alert: core-cluster-alert {
+				cluster6_7_alert: cluster6-7-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				core_cluster_crit: core-cluster-crit {
+				cluster6_7_crit: cluster6-7-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -457,7 +457,7 @@ core_cluster_crit: core-cluster-crit {
 
 			cooling-maps {
 				map0 {
-					trip = <&core_cluster_alert>;
+					trip = <&cluster6_7_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -478,6 +478,126 @@ map0 {
 				};
 			};
 		};
+
+		ddr-cluster5 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				ddr-cluster5-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-cluster5-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wriop {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				wriop-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wriop-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		dce-qbman-hsio2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				dce-qbman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				dce-qbman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ccn-dpaa-tbu {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				ccn-dpaa-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ccn-dpaa-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster4-hsio3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 5>;
+
+			trips {
+				clust4-hsio3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				clust4-hsio3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster2-3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 6>;
+
+			trips {
+				cluster2-3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster2-3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	soc {
@@ -549,7 +669,7 @@ tmu: tmu@1f80000 {
 				/* Calibration data group 1 */
 				<0x00000000 0x00000035
 				/* Calibration data group 2 */
-				0x00010001 0x00000154>;
+				0x00000001 0x00000154>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
new file mode 100644
index 000000000000..baa5f997d018
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "none";
+		};
+
+		led1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "none";
+		};
+
+		led2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "none";
+		};
+
+		led3 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led3>;
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	cs-gpios = <&gpio5 9 0>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "microchip,at25160bn", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <32>;
+		size = <2048>;
+		address-width = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		clock-names = "xclk";
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	pca6416_0: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpio {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
+			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
new file mode 100644
index 000000000000..74a7b0cc10c2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-beacon-som.dtsi"
+#include "imx8mm-beacon-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8M Mini Development Kit";
+	compatible = "beacon,imx8mm-beacon-kit", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
new file mode 100644
index 000000000000..fb0137a8611c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc1_gpio>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "microchip, at24c64d", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		clock-names = "extclk";
+	};
+};
+
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	pm-ignore-notify;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+				MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+				MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+				MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+				MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+				MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+				MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+				MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+				MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+				MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+				MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+				MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+				MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+				MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+				MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+				MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+				MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+			>;
+		};
+
+		pinctrl_pmic: pmicirq {
+			fsl,pins = <
+				MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+				MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+				MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+				MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+				MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
+				MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7	0x19
+				MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x19
+				MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+			>;
+		};
+
+		pinctrl_usdhc1_gpio: usdhc1grpgpio {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x41
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+				MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+				MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+				MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+				MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+				MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+				MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+				MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+				MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+				MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+				MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+				MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+				MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+				MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+				MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+				MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+				MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+				MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+				MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+				MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+				MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+				MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+				MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+				MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+				MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+				MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+				MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+				MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+				MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+				MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+				MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+				MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+				MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+				MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+				MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+				MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+				MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+				MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+				MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+				MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+				MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+				MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+				MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+				MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+				MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+				MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+			>;
+		};
+
+		pinctrl_wlan: wlangrp {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9		0x111
+			>;
+		};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 951e14a3de0e..e5ec8322796d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -82,6 +82,18 @@ &A53_0 {
 	cpu-supply = <&buck2_reg>;
 };
 
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
 &ddrc {
 	operating-points-v2 = <&ddrc_opp_table>;
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index cc7152ecedd9..c63685ae80ee 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -264,12 +264,13 @@ soc@0 {
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
 
 			sai1: sai@30010000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 				reg = <0x30010000 0x10000>;
 				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -283,6 +284,7 @@ sai1: sai@30010000 {
 			};
 
 			sai2: sai@30020000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 				reg = <0x30020000 0x10000>;
 				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -310,6 +312,7 @@ sai3: sai@30030000 {
 			};
 
 			sai5: sai@30050000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 				reg = <0x30050000 0x10000>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
@@ -323,6 +326,7 @@ sai5: sai@30050000 {
 			};
 
 			sai6: sai@30060000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 				reg = <0x30060000 0x10000>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
@@ -543,7 +547,7 @@ src: reset-controller@30390000 {
 
 		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x10000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -603,7 +607,7 @@ system_counter: timer@306a0000 {
 
 		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x10000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -863,7 +867,7 @@ fec1: ethernet@30be0000 {
 
 		aips4: bus@32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x32df0000 0x10000>;
+			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 2497eebb5739..d07e0e6a00cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -17,6 +17,18 @@ &A53_0 {
 	cpu-supply = <&buck2_reg>;
 };
 
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
 &ddrc {
 	operating-points-v2 = <&ddrc_opp_table>;
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index fa78f0163270..fb63a98fdff5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -121,7 +121,7 @@ a53_opp_table: opp-table {
 
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <950000>;
+			opp-microvolt = <850000>;
 			opp-supported-hw = <0xb00>, <0x7>;
 			clock-latency-ns = <150000>;
 			opp-suspend;
@@ -241,7 +241,7 @@ soc@0 {
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -448,7 +448,7 @@ src: reset-controller@30390000 {
 
 		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x10000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -508,7 +508,7 @@ system_counter: timer@306a0000 {
 
 		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x10000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -718,7 +718,7 @@ sdma1: dma-controller@30bd0000 {
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MN_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MN_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
@@ -754,7 +754,7 @@ fec1: ethernet@30be0000 {
 
 		aips4: bus@32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x32df0000 0x10000>;
+			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
index da78f89b6c98..319ab34cab3e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -151,26 +151,26 @@
 #define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22                         0x070 0x2D0 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x074 0x2D4 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC              0x074 0x2D4 0x540 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03              0x074 0x2D4 0x4CC 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03              0x074 0x2D4 0x4CC 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24                         0x074 0x2D4 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2                       0x074 0x2D4 0x618 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23                      0x074 0x2D4 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x078 0x2D8 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER                        0x078 0x2D8 0x000 0x1 0x0
 #define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK                 0x078 0x2D8 0x53C 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02                 0x078 0x2D8 0x4C8 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02                 0x078 0x2D8 0x4C8 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25                            0x078 0x2D8 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3                          0x078 0x2D8 0x61C 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24                         0x078 0x2D8 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0                    0x07C 0x2DC 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00               0x07C 0x2DC 0x534 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01                 0x07C 0x2DC 0x4C4 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01                 0x07C 0x2DC 0x4C4 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26                            0x07C 0x2DC 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4                          0x07C 0x2DC 0x620 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25                         0x07C 0x2DC 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1                    0x080 0x2E0 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC                 0x080 0x2E0 0x538 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00                 0x080 0x2E0 0x4C0 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00                 0x080 0x2E0 0x4C0 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27                            0x080 0x2E0 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B                        0x080 0x2E0 0x000 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26                         0x080 0x2E0 0x000 0x7 0x0
@@ -291,7 +291,7 @@
 #define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA                             0x0C8 0x328 0x5C0 0x2 0x1
 #define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX                         0x0C8 0x328 0x5F0 0x3 0x2
 #define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX                         0x0C8 0x328 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00                0x0C8 0x328 0x4C0 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00                0x0C8 0x328 0x4C0 0x4 0x2
 #define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15                           0x0C8 0x328 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                0x0C8 0x328 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02                    0x0C8 0x328 0x000 0x7 0x0
@@ -313,7 +313,7 @@
 #define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                         0x0D4 0x334 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO                          0x0D4 0x334 0x56C 0x2 0x0
 #define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN                    0x0D4 0x334 0x544 0x3 0x1
-#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03                0x0D4 0x334 0x4CC 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03                0x0D4 0x334 0x4CC 0x4 0x2
 #define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18                           0x0D4 0x334 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET             0x0D4 0x334 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B                     0x0D8 0x338 0x000 0x0 0x0
@@ -487,27 +487,27 @@
 #define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02              0x134 0x394 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT                             0x134 0x394 0x000 0x2 0x0
 #define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL                             0x134 0x394 0x5C4 0x3 0x1
-#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00                0x134 0x394 0x4C0 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00                0x134 0x394 0x4C0 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21                           0x134 0x394 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x138 0x398 0x4FC 0x0 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03              0x138 0x398 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC                0x138 0x398 0x4D8 0x2 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC                0x138 0x398 0x510 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01                0x138 0x398 0x4C4 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01                0x138 0x398 0x4C4 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22                           0x138 0x398 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX                              0x138 0x398 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x13C 0x39C 0x500 0x0 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04              0x13C 0x39C 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC                0x13C 0x39C 0x4D8 0x2 0x1
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK                0x13C 0x39C 0x50C 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02                0x13C 0x39C 0x4C8 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02                0x13C 0x39C 0x4C8 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23                           0x13C 0x39C 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX                              0x13C 0x39C 0x54C 0x6 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x140 0x3A0 0x504 0x0 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05              0x140 0x3A0 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC                0x140 0x3A0 0x4D8 0x2 0x2
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00              0x140 0x3A0 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03                0x140 0x3A0 0x4CC 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03                0x140 0x3A0 0x4CC 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24                           0x140 0x3A0 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX                              0x140 0x3A0 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK                   0x144 0x3A4 0x4F0 0x0 0x0
@@ -528,22 +528,22 @@
 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00              0x150 0x3B0 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x150 0x3B0 0x4F8 0x1 0x1
 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01              0x150 0x3B0 0x000 0x2 0x0
-#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00                0x150 0x3B0 0x4C0 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00                0x150 0x3B0 0x4C0 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN                 0x150 0x3B0 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02                           0x150 0x3B0 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01              0x154 0x3B4 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x154 0x3B4 0x4FC 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01                0x154 0x3B4 0x4C4 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01                0x154 0x3B4 0x4C4 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT                0x154 0x3B4 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03                           0x154 0x3B4 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02              0x158 0x3B8 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x158 0x3B8 0x500 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02                0x158 0x3B8 0x4C8 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02                0x158 0x3B8 0x4C8 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC                            0x158 0x3B8 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04                           0x158 0x3B8 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03              0x15C 0x3BC 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x15C 0x3BC 0x504 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03                0x15C 0x3BC 0x4CC 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03                0x15C 0x3BC 0x4CC 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO                           0x15C 0x3BC 0x57C 0x4 0x1
 #define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05                           0x15C 0x3BC 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04              0x160 0x3C0 0x000 0x0 0x0
@@ -624,7 +624,7 @@
 #define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX                         0x19C 0x3FC 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX                         0x19C 0x3FC 0x5E8 0x4 0x2
 #define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21                           0x19C 0x3FC 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02                0x19C 0x3FC 0x4C8 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02                0x19C 0x3FC 0x4C8 0x6 0x5
 #define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00                        0x19C 0x3FC 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK                 0x1A0 0x400 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK                 0x1A0 0x400 0x50C 0x1 0x2
@@ -632,7 +632,7 @@
 #define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX                          0x1A0 0x400 0x5E8 0x4 0x3
 #define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX                          0x1A0 0x400 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                            0x1A0 0x400 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01                 0x1A0 0x400 0x4C4 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01                 0x1A0 0x400 0x4C4 0x6 0x5
 #define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01                         0x1A0 0x400 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00              0x1A4 0x404 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00              0x1A4 0x404 0x000 0x1 0x0
@@ -641,7 +641,7 @@
 #define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS                        0x1A4 0x404 0x5E4 0x4 0x2
 #define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS                        0x1A4 0x404 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23                           0x1A4 0x404 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03                0x1A4 0x404 0x4CC 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03                0x1A4 0x404 0x4CC 0x6 0x5
 #define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02                        0x1A4 0x404 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC                0x1A8 0x408 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01              0x1A8 0x408 0x000 0x1 0x0
@@ -650,13 +650,13 @@
 #define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS                        0x1A8 0x408 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS                        0x1A8 0x408 0x5E4 0x4 0x3
 #define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24                           0x1A8 0x408 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02                0x1A8 0x408 0x4C8 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02                0x1A8 0x408 0x4C8 0x6 0x6
 #define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE                         0x1A8 0x408 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK                 0x1AC 0x40C 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02               0x1AC 0x40C 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX                               0x1AC 0x40C 0x54C 0x3 0x1
 #define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25                            0x1AC 0x40C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01                 0x1AC 0x40C 0x4C4 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01                 0x1AC 0x40C 0x4C4 0x6 0x6
 #define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT                       0x1AC 0x40C 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00              0x1B0 0x410 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03              0x1B0 0x410 0x000 0x1 0x0
@@ -680,7 +680,7 @@
 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01              0x1B8 0x418 0x000 0x3 0x0
 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN                    0x1B8 0x418 0x544 0x4 0x2
 #define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28                           0x1B8 0x418 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00                0x1B8 0x418 0x4C0 0x6 0x4
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00                0x1B8 0x418 0x4C0 0x6 0x5
 #define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00                       0x1B8 0x418 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK                 0x1BC 0x41C 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02               0x1BC 0x41C 0x000 0x1 0x0
@@ -697,7 +697,7 @@
 #define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS                         0x1C0 0x420 0x5EC 0x4 0x3
 #define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS                         0x1C0 0x420 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30                            0x1C0 0x420 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01                 0x1C0 0x420 0x4C4 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01                 0x1C0 0x420 0x4C4 0x6 0x7
 #define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00                         0x1C0 0x420 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC                0x1C4 0x424 0x4EC 0x0 0x1
 #define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1C4 0x424 0x000 0x1 0x0
@@ -706,7 +706,7 @@
 #define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX                         0x1C4 0x424 0x5F0 0x4 0x4
 #define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX                         0x1C4 0x424 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31                           0x1C4 0x424 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03                0x1C4 0x424 0x4CC 0x6 0x5
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03                0x1C4 0x424 0x4CC 0x6 0x6
 #define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01                        0x1C4 0x424 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK                 0x1C8 0x428 0x4E8 0x0 0x1
 #define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02               0x1C8 0x428 0x000 0x1 0x0
@@ -715,7 +715,7 @@
 #define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX                          0x1C8 0x428 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX                          0x1C8 0x428 0x5F0 0x4 0x5
 #define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00                            0x1C8 0x428 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02                 0x1C8 0x428 0x4C8 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02                 0x1C8 0x428 0x4C8 0x6 0x7
 #define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02                         0x1C8 0x428 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00               0x1CC 0x42C 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03               0x1CC 0x42C 0x000 0x1 0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 9b1616e59d58..014205fc24f6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "imx8mp-pinfunc.h"
 
@@ -43,6 +44,7 @@ A53_0: cpu@0 {
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
 		};
 
 		A53_1: cpu@1 {
@@ -53,6 +55,7 @@ A53_1: cpu@1 {
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
 		};
 
 		A53_2: cpu@2 {
@@ -63,6 +66,7 @@ A53_2: cpu@2 {
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
 		};
 
 		A53_3: cpu@3 {
@@ -73,6 +77,7 @@ A53_3: cpu@3 {
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -127,6 +132,68 @@ psci {
 		method = "smc";
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 0>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		soc-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 1>;
+			trips {
+				soc_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
@@ -145,7 +212,7 @@ soc@0 {
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -215,6 +282,13 @@ gpio5: gpio@30240000 {
 				gpio-ranges = <&iomuxc 0 114 30>;
 			};
 
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mp-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>;
+				#thermal-sensor-cells = <1>;
+			};
+
 			wdog1: watchdog@30280000 {
 				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
 				reg = <0x30280000 0x10000>;
@@ -318,7 +392,7 @@ src: reset-controller@30390000 {
 
 		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x400000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -378,7 +452,7 @@ system_counter: timer@306a0000 {
 
 		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x400000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 10eca94194be..6900ac274f5b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -318,7 +318,7 @@ buck3_reg: BUCK3 {
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
-				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-run-voltage = <900000>;
 			};
 
 			buck4_reg: BUCK4 {
@@ -410,7 +410,7 @@ ldo7_reg: LDO7 {
 		};
 	};
 
-	typec_ptn5100: usb_typec@52 {
+	typec_ptn5100: usb-typec@52 {
 		compatible = "nxp,ptn5110";
 		reg = <0x52>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 75b384217a23..bab88369be1b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -291,7 +291,7 @@ soc@0 {
 
 		bus@30000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -696,7 +696,7 @@ pgc_pcie2: power-domain@a {
 
 		bus@30400000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x10000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -756,7 +756,7 @@ system_counter: timer@306a0000 {
 
 		bus@30800000 { /* AIPS3 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x10000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -1029,7 +1029,7 @@ fec1: ethernet@30be0000 {
 
 		bus@32c00000 { /* AIPS4 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x32df0000 0x10000>;
+			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 13460a360c6a..9b105aec8773 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -30,31 +30,10 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
 	};
 };
 
-&adma_lpuart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart0>;
+&adma_dsp {
 	status = "okay";
 };
 
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-	};
-};
-
 &adma_i2c1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -131,6 +110,68 @@ light-sensor@44 {
 	};
 };
 
+&adma_lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&scu_key {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal0 {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
 &usdhc1 {
 	assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
 	assigned-clock-rates = <200000000>;
@@ -229,11 +270,3 @@ IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
 		>;
 	};
 };
-
-&adma_dsp {
-	status = "okay";
-};
-
-&scu_key {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index e8ffb7590656..d1c3c98e4b39 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -141,17 +141,11 @@ psci {
 
 	scu {
 		compatible = "fsl,imx-scu";
-		mbox-names = "tx0", "tx1", "tx2", "tx3",
-			     "rx0", "rx1", "rx2", "rx3",
+		mbox-names = "tx0",
+			     "rx0",
 			     "gip3";
 		mboxes = <&lsio_mu1 0 0
-			  &lsio_mu1 0 1
-			  &lsio_mu1 0 2
-			  &lsio_mu1 0 3
 			  &lsio_mu1 1 0
-			  &lsio_mu1 1 1
-			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3
 			  &lsio_mu1 3 3>;
 
 		clk: clock-controller {
@@ -548,14 +542,14 @@ lsio_mu0: mailbox@5d1b0000 {
 		};
 
 		lsio_mu1: mailbox@5d1c0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+			compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
 			reg = <0x5d1c0000 0x10000>;
 			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <2>;
 		};
 
 		lsio_mu2: mailbox@5d1d0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+			compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
 			reg = <0x5d1d0000 0x10000>;
 			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <2>;
@@ -563,7 +557,7 @@ lsio_mu2: mailbox@5d1d0000 {
 		};
 
 		lsio_mu3: mailbox@5d1e0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+			compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
 			reg = <0x5d1e0000 0x10000>;
 			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <2>;
@@ -571,7 +565,7 @@ lsio_mu3: mailbox@5d1e0000 {
 		};
 
 		lsio_mu4: mailbox@5d1f0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+			compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
 			reg = <0x5d1f0000 0x10000>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index 263b972a6d1e..8bc6caa9167d 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -81,4 +81,5 @@ ptp_timer0: ptp-timer@1afe000 {
 	reg = <0x0 0x1afe000 0x0 0x1000>;
 	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 	clocks = <&clockgen 3 0>;
+	fsl,extts-fifo;
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index d8c44d3ca15a..f52de8f7806a 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -539,12 +539,12 @@ qspi: spi@ff8d2000 {
 
 		firmware {
 			svc {
-				compatible = "intel,stratix10-svc";
+				compatible = "intel,agilex-svc";
 				method = "smc";
 				memory-region = <&service_reserved>;
 
 				fpga_mgr: fpga-mgr {
-					compatible = "intel,stratix10-soc-fpga-mgr";
+					compatible = "intel,agilex-soc-fpga-mgr";
 				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index b90d78a5724b..c8243da71041 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -276,7 +276,7 @@ &cp0_ethernet {
 /* SFP */
 &cp0_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	managed = "in-band-status";
 	phys = <&cp0_comphy2 0>;
 	sfp = <&sfp_cp0_eth0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
index c3e18fd5bc27..2e6832d02a59 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
@@ -16,14 +16,14 @@ / {
 
 &cp0_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	managed = "in-band-status";
 	sfp = <&sfp_eth0>;
 };
 
 &cp1_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	managed = "in-band-status";
 	sfp = <&sfp_eth1>;
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index d06f5ab7ddab..1766cf58101b 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -34,12 +34,12 @@ &cp0_eth0 {
 	status = "okay";
 	/* Network PHY */
 	phy = <&phy0>;
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 };
 
 &cp1_eth0 {
 	status = "okay";
 	/* Network PHY */
 	phy = <&phy8>;
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 };
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 2f8967cb8717..a57af9da9f5c 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -6,6 +6,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 83e10591e0e5..d174ad214857 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -543,3 +543,7 @@ &watchdog {
 	pinctrl-0 = <&watchdog_pins>;
 	status = "okay";
 };
+
+&wmac {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 3f783348c66a..0b4de627f96e 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -506,3 +506,7 @@ &watchdog {
 	pinctrl-0 = <&watchdog_pins>;
 	status = "okay";
 };
+
+&wmac {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 339dc9f88f43..1a39e0ef776b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -699,6 +699,17 @@ mmc1: mmc@11240000 {
 		status = "disabled";
 	};
 
+	wmac: wmac@18000000 {
+		compatible = "mediatek,mt7622-wmac";
+		reg = <0 0x18000000 0 0x100000>;
+		interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+
+		mediatek,infracfg = <&infracfg>;
+		status = "disabled";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+	};
+
 	ssusbsys: ssusbsys@1a000000 {
 		compatible = "mediatek,mt7622-ssusbsys",
 			     "syscon";
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
new file mode 100644
index 000000000000..44f6149c1307
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2019 MediaTek Inc.
+ */
+
+/dts-v1/;
+#include "mt8173-elm-hana.dtsi"
+
+/ {
+	model = "Google Hanawl";
+	compatible = "google,hana-rev7", "mediatek,mt8173";
+};
+
+&cpu_thermal {
+	trips {
+		cpu_crit: cpu_crit0 {
+			temperature = <100000>;
+			type = "critical";
+		};
+	};
+};
+
+&gpio_keys {
+	/delete-node/tablet_mode;
+	/delete-node/volume_down;
+	/delete-node/volume_up;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
new file mode 100644
index 000000000000..c234296755e1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+/dts-v1/;
+#include "mt8173-elm-hana.dtsi"
+
+/ {
+	model = "Google Hana";
+	compatible = "google,hana-rev6", "google,hana-rev5",
+		     "google,hana-rev4", "google,hana-rev3",
+		     "google,hana", "mediatek,mt8173";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
new file mode 100644
index 000000000000..bdcd35cecad9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+#include "mt8173-elm.dtsi"
+
+&i2c0 {
+	clock-frequency = <200000>;
+};
+
+&i2c3 {
+	touchscreen2: touchscreen@34 {
+		compatible = "melfas,mip4_ts";
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/*
+	 * Lenovo 100e Chromebook 2nd Gen (MTK) and Lenovo 300e Chromebook 2nd
+	 * Gen (MTK) are using synaptics touchscreen (hid-over-i2c driver) as a
+	 * second source touchscreen.
+	 */
+	touchscreen3: touchscreen@20 {
+		compatible = "hid-over-i2c";
+		reg = <0x20>;
+		hid-descr-addr = <0x0020>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c4 {
+	/*
+	 * Lenovo 100e Chromebook 2nd Gen (MTK) and Lenovo 300e Chromebook 2nd
+	 * Gen (MTK) are using synaptics trackpad (hid-over-i2c driver) as a
+	 * second source trackpad.
+	 */
+	trackpad2: trackpad@2c {
+		compatible = "hid-over-i2c";
+		interrupt-parent = <&pio>;
+		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x2c>;
+		hid-descr-addr = <0x0020>;
+		wakeup-source;
+	};
+};
+
+&mmc1 {
+	wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&pio {
+	hdmi_mux_pins: hdmi_mux_pins {
+		pins2 {
+			pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_wp {
+			pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
new file mode 100644
index 000000000000..e9e4ac0b74b2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+/dts-v1/;
+#include "mt8173-elm.dtsi"
+
+/ {
+	model = "Google Elm";
+	compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6",
+		     "google,elm-rev5", "google,elm-rev4", "google,elm-rev3",
+		     "google,elm", "mediatek,mt8173";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
new file mode 100644
index 000000000000..a5a12b2599a4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -0,0 +1,1173 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "mt8173.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 1000000>;
+		power-supply = <&bl_fixed_reg>;
+		enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&disp_pwm0_pins>;
+		status = "okay";
+	};
+
+	bl_fixed_reg: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+		gpio = <&pio 32 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_fixed_pins>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		lid {
+			label = "Lid";
+			gpios = <&pio 69 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			gpio-key,wakeup;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			gpio-key,wakeup;
+		};
+
+		tablet_mode {
+			label = "Tablet_mode";
+			gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
+			linux,code = <SW_TABLET_MODE>;
+			linux,input-type = <EV_SW>;
+			gpio-key,wakeup;
+		};
+
+		volume_down {
+			label = "Volume_down";
+			gpios = <&pio 123 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume_up";
+			gpios = <&pio 124 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	panel: panel {
+		compatible = "lg,lp120up1";
+		power-supply = <&panel_fixed_3v3>;
+		ddc-i2c-bus = <&i2c0>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&ps8640_out>;
+			};
+		};
+	};
+
+	panel_fixed_3v3: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "PANEL_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 41 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_fixed_pins>;
+	};
+
+	ps8640_fixed_1v2: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "PS8640_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <2000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ps8640_fixed_pins>;
+	};
+
+	sdio_fixed_3v3: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_fixed_3v3_pins>;
+	};
+
+	sound: sound {
+		compatible = "mediatek,mt8173-rt5650";
+		mediatek,audio-codec = <&rt5650 &hdmi0>;
+		mediatek,platform = <&afe>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&aud_i2s2>;
+
+		mediatek,mclk = <1>;
+		codec-capture {
+			sound-dai = <&rt5650 1>;
+		};
+	};
+
+	hdmicon: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+};
+
+&cec {
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&cpu_thermal {
+	sustainable-power = <4500>; /* milliwatts */
+	trips {
+		threshold: trip-point0 {
+			temperature = <60000>;
+		};
+
+		target: trip-point1 {
+			temperature = <65000>;
+		};
+	};
+};
+
+&dsi0 {
+	status = "okay";
+	ports {
+		port {
+			dsi0_out: endpoint {
+				remote-endpoint = <&ps8640_in>;
+			};
+		};
+	};
+};
+
+&dpi0 {
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_phy {
+	status = "okay";
+	mediatek,ibias = <0xc>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rt5650: audio-codec@1a {
+		compatible = "realtek,rt5650";
+		reg = <0x1a>;
+		avdd-supply = <&mt6397_vgp1_reg>;
+		cpvdd-supply = <&mt6397_vcama_reg>;
+		interrupt-parent = <&pio>;
+		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt5650_irq>;
+		#sound-dai-cells = <1>;
+		realtek,dmic1-data-pin = <2>;
+		realtek,jd-mode = <2>;
+	};
+
+	ps8640: edp-bridge@8 {
+		compatible = "parade,ps8640";
+		reg = <0x8>;
+		powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ps8640_pins>;
+		vdd12-supply = <&ps8640_fixed_1v2>;
+		vdd33-supply = <&mt6397_vgp2_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ps8640_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ps8640_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <1500000>;
+	status = "okay";
+
+	da9211: da9211@68 {
+		compatible = "dlg,da9211";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			da9211_vcpu_reg: BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp  = <2000000>;
+				regulator-max-microamp  = <4400000>;
+				regulator-ramp-delay = <10000>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			da9211_vgpu_reg: BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp  = <2000000>;
+				regulator-max-microamp  = <3000000>;
+				regulator-ramp-delay = <10000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&trackpad_irq>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		interrupt-parent = <&pio>;
+		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x15>;
+		vcc-supply = <&mt6397_vgp6_reg>;
+		wakeup-source;
+	};
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x14015>;
+	mediatek,hs200-cmd-int-delay=<30>;
+	mediatek,hs400-cmd-int-delay=<14>;
+	mediatek,hs400-cmd-resp-sel-rising;
+	vmmc-supply = <&mt6397_vemc_3v3_reg>;
+	vqmmc-supply = <&mt6397_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cd-gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mt6397_vmch_reg>;
+	vqmmc-supply = <&mt6397_vmc_reg>;
+};
+
+&mmc3 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	cap-sdio-irq;
+	vmmc-supply = <&sdio_fixed_3v3>;
+	vqmmc-supply = <&mt6397_vgp3_reg>;
+	non-removable;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	btmrvl: btmrvl@2 {
+		compatible = "marvell,sd8897-bt";
+		reg = <2>;
+		interrupt-parent = <&pio>;
+		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = /bits/ 16 <0x0d>;
+		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
+	};
+
+	mwifiex: mwifiex@1 {
+		compatible = "marvell,sd8897";
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = <3>;
+	};
+};
+
+&nor_flash {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_gpio1_pins>;
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	non-removable;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};
+
+&pio {
+	gpio-line-names = "EC_INT_1V8",
+			  "SD_CD_L",
+			  "ALC5514_IRQ",
+			  "ALC5650_IRQ",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it SFWP_B.
+			   */
+			  "AP_FLASH_WP_L",
+			  "SFIN",
+			  "SFCS0",
+			  "SFHOLD",
+			  "SFOUT",
+			  "SFCK",
+			  "WRAP_EVENT_S_EINT10",
+			  "PMU_INT",
+			  "I2S2_WS_ALC5650",
+			  "I2S2_BCK_ALC5650",
+			  "PWR_BTN_1V8",
+			  "DA9212_IRQ",
+			  "IDDIG",
+			  "WATCHDOG",
+			  "CEC",
+			  "HDMISCK",
+			  "HDMISD",
+			  "HTPLG",
+			  "MSDC3_DAT0",
+			  "MSDC3_DAT1",
+			  "MSDC3_DAT2",
+			  "MSDC3_DAT3",
+			  "MSDC3_CLK",
+			  "MSDC3_CMD",
+			  "USB_C0_OC_FLAGB",
+			  "USBA_OC1_L",
+			  "PS8640_1V2_ENABLE",
+			  "THERM_ALERT_N",
+			  "PANEL_LCD_POWER_EN",
+			  "ANX7688_CHIP_PD_C",
+			  "EC_IN_RW_1V8",
+			  "ANX7688_1V_EN_C",
+			  "USB_DP_HPD_C",
+			  "TPM_DAVINT_N",
+			  "MARVELL8897_IRQ",
+			  "EN_USB_A0_PWR",
+			  "USBA_A0_OC_L",
+			  "EN_PP3300_DX_EDP",
+			  "",
+			  "SOC_I2C2_1V8_SDA_400K",
+			  "SOC_I2C2_1V8_SCL_400K",
+			  "SOC_I2C0_1V8_SDA_400K",
+			  "SOC_I2C0_1V8_SCL_400K",
+			  "EMMC_ID1",
+			  "EMMC_ID0",
+			  "MEM_CONFIG3",
+			  "EMMC_ID2",
+			  "MEM_CONFIG1",
+			  "MEM_CONFIG2",
+			  "BRD_ID2",
+			  "MEM_CONFIG0",
+			  "BRD_ID0",
+			  "BRD_ID1",
+			  "EMMC_DAT0",
+			  "EMMC_DAT1",
+			  "EMMC_DAT2",
+			  "EMMC_DAT3",
+			  "EMMC_DAT4",
+			  "EMMC_DAT5",
+			  "EMMC_DAT6",
+			  "EMMC_DAT7",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "EMMC_RCLK",
+			  "PLT_RST_L",
+			  "LID_OPEN_1V8_L",
+			  "AUDIO_SPI_MISO_R",
+			  "",
+			  "AC_OK_1V8",
+			  "SD_DATA0",
+			  "SD_DATA1",
+			  "SD_DATA2",
+			  "SD_DATA3",
+			  "SD_CLK",
+			  "SD_CMD",
+			  "PWRAP_SPI0_MI",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_CK",
+			  "PWRAP_SPI0_CSN",
+			  "",
+			  "",
+			  "WIFI_PDN",
+			  "RTC32K_1V8",
+			  "DISP_PWM0",
+			  "TOUCHSCREEN_INT_L",
+			  "",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "PS8640_MODE_CONF",
+			  "TOUCHSCREEN_RESET_R",
+			  "PLATFORM_PROCHOT_L",
+			  "PANEL_POWER_EN",
+			  "REC_MODE_L",
+			  "EC_FW_UPDATE_L",
+			  "ACCEL2_INT_L",
+			  "HDMI_DP_INT",
+			  "ACCELGYRO3_INT_L",
+			  "ACCELGYRO4_INT_L",
+			  "SPI_EC_CLK",
+			  "SPI_EC_MI",
+			  "SPI_EC_MO",
+			  "SPI_EC_CSN",
+			  "SOC_I2C3_1V8_SDA_400K",
+			  "SOC_I2C3_1V8_SCL_400K",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "PS8640_SYSRSTN_1V8",
+			  "APIN_MAX98090_DOUT2",
+			  "TP_INT_1V8_L_R",
+			  "RST_USB_HUB_R",
+			  "BT_WAKE_L",
+			  "ACCEL1_INT_L",
+			  "TABLET_MODE_L",
+			  "",
+			  "V_UP_IN_L_R",
+			  "V_DOWN_IN_L_R",
+			  "SOC_I2C1_1V8_SDA_1M",
+			  "SOC_I2C1_1V8_SCL_1M",
+			  "PS8640_PDN_1V8",
+			  "MAX98090_LRCLK",
+			  "MAX98090_BCLK",
+			  "MAX98090_MCLK",
+			  "APOUT_MAX98090_DIN",
+			  "APIN_MAX98090_DOUT",
+			  "SOC_I2C4_1V8_SDA_400K",
+			  "SOC_I2C4_1V8_SCL_400K";
+
+	aud_i2s2: aud_i2s2 {
+		pins1 {
+			pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>,
+				 <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>,
+				 <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>,
+				 <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>,
+				 <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>,
+				 <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>,
+				 <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>;
+			bias-pull-down;
+		};
+	};
+
+	bl_fixed_pins: bl_fixed_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>;
+			output-low;
+		};
+	};
+
+	bt_wake_pins: bt_wake_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>;
+			bias-pull-up;
+		};
+	};
+
+	disp_pwm0_pins: disp_pwm0_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
+			output-low;
+		};
+	};
+
+	gpio_keys_pins: gpio_keys_pins {
+		volume_pins {
+			pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>,
+				 <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>;
+			bias-pull-up;
+		};
+
+		tablet_mode_pins {
+			pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>;
+			bias-pull-up;
+		};
+	};
+
+	hdmi_mux_pins: hdmi_mux_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>;
+		};
+	};
+
+	i2c1_pins_a: i2c1 {
+		da9211_pins {
+			pinmux = <MT8173_PIN_15_EINT15__FUNC_GPIO15>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+
+		pins_insert {
+			pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>;
+			bias-pull-up;
+		};
+	};
+
+	mmc3_pins_default: mmc3default {
+		pins_dat {
+			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_cmd {
+			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_ds {
+			pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc3_pins_uhs: mmc3 {
+		pins_dat {
+			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_cmd {
+			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nor_gpio1_pins: nor {
+		pins1 {
+			pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>,
+				 <MT8173_PIN_7_EINT7__FUNC_SFHOLD>,
+				 <MT8173_PIN_8_EINT8__FUNC_SFIN>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+	};
+
+	panel_fixed_pins: panel_fixed_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>;
+		};
+	};
+
+	ps8640_pins: ps8640_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>,
+				 <MT8173_PIN_115_URTS0__FUNC_GPIO115>,
+				 <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>;
+		};
+	};
+
+	ps8640_fixed_pins: ps8640_fixed_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>;
+		};
+	};
+
+	rt5650_irq: rt5650_irq {
+		pins1 {
+			pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>;
+			bias-pull-down;
+		};
+	};
+
+	sdio_fixed_3v3_pins: sdio_fixed_3v3_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>;
+			output-low;
+		};
+	};
+
+	spi_pins_a: spi1 {
+		pins1 {
+			pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>;
+			bias-pull-up;
+		};
+
+		pins_spi {
+			pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>,
+				 <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>,
+				 <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>,
+				 <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>;
+			bias-disable;
+		};
+	};
+
+	trackpad_irq: trackpad_irq {
+		pins1 {
+			pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	usb_pins: usb {
+		pins1 {
+			pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>;
+			output-high;
+			bias-disable;
+		};
+	};
+
+	wifi_wake_pins: wifi_wake_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwrap {
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		clock: mt6397clock {
+			compatible = "mediatek,mt6397-clk";
+			#clock-cells = <1>;
+		};
+
+		pio6397: pinctrl {
+			compatible = "mediatek,mt6397-pinctrl";
+			pins-are-numbered;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+				regulator-always-on;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+
+		rtc: mt6397rtc {
+			compatible = "mediatek,mt6397-rtc";
+		};
+
+		syscfg_pctl_pmic: syscfg_pctl_pmic@c000 {
+			compatible = "mediatek,mt6397-pctl-pmic-syscfg",
+				     "syscon";
+			reg = <0 0x0000c000 0 0x0108>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_a>;
+	mediatek,pad-select = <1>;
+	status = "okay";
+	/* clients */
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0x0>;
+		spi-max-frequency = <12000000>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		google,cros-ec-spi-msg-delay = <500>;
+
+		i2c_tunnel: i2c-tunnel0 {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <1>;
+			};
+		};
+	};
+};
+
+&ssusb {
+	dr_mode = "host";
+	wakeup-source;
+	vusb33-supply = <&mt6397_vusb_reg>;
+	status = "okay";
+};
+
+&thermal {
+	bank0-supply = <&mt6397_vpca15_reg>;
+	bank1-supply = <&da9211_vcpu_reg>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_pins>;
+	vusb33-supply = <&mt6397_vusb_reg>;
+	status = "okay";
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index ccb8e88a60c5..a212bf124e81 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -50,6 +50,10 @@ aliases {
 		mdp_wdma0 = &mdp_wdma0;
 		mdp_wrot0 = &mdp_wrot0;
 		mdp_wrot1 = &mdp_wrot1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
 	};
 
 	cluster0_opp: opp_table0 {
@@ -242,21 +246,21 @@ psci {
 		cpu_on	      = <0x84000003>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32000>;
 		clock-output-names = "clk32k";
 	};
 
-	cpum_ck: oscillator@2 {
+	cpum_ck: oscillator2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
@@ -272,19 +276,19 @@ cpu_thermal: cpu_thermal {
 			sustainable-power = <1500>; /* milliwatts */
 
 			trips {
-				threshold: trip-point@0 {
+				threshold: trip-point0 {
 					temperature = <68000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				target: trip-point@1 {
+				target: trip-point1 {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit@0 {
+				cpu_crit: cpu_crit0 {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -292,13 +296,13 @@ cpu_crit: cpu_crit@0 {
 			};
 
 			cooling-maps {
-				map@0 {
+				map0 {
 					trip = <&target>;
 					cooling-device = <&cpu0 0 0>,
 							 <&cpu1 0 0>;
 					contribution = <3072>;
 				};
-				map@1 {
+				map1 {
 					trip = <&target>;
 					cooling-device = <&cpu2 0 0>,
 							 <&cpu3 0 0>;
@@ -312,7 +316,7 @@ reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		vpu_dma_reserved: vpu_dma_mem_region {
+		vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xb7000000 0 0x500000>;
 			alignment = <0x1000>;
@@ -365,7 +369,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
 			reg = <0 0x10005000 0 0x1000>;
 		};
 
-		pio: pinctrl@10005000 {
+		pio: pinctrl@1000b000 {
 			compatible = "mediatek,mt8173-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a>;
@@ -549,7 +553,7 @@ gce: mailbox@10212000 {
 			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&infracfg CLK_INFRA_GCE>;
 			clock-names = "gce";
-			#mbox-cells = <3>;
+			#mbox-cells = <2>;
 		};
 
 		mipi_tx0: mipi-dphy@10215000 {
@@ -572,7 +576,7 @@ mipi_tx1: mipi-dphy@10216000 {
 			status = "disabled";
 		};
 
-		gic: interrupt-controller@10220000 {
+		gic: interrupt-controller@10221000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
@@ -916,6 +920,9 @@ mmsys: clock-controller@14000000 {
 			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
 			assigned-clock-rates = <400000000>;
 			#clock-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 		};
 
 		mdp_rdma0: rdma@14001000 {
@@ -996,6 +1003,7 @@ ovl0: ovl@1400c000 {
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
 			mediatek,larb = <&larb0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
 
 		ovl1: ovl@1400d000 {
@@ -1006,6 +1014,7 @@ ovl1: ovl@1400d000 {
 			clocks = <&mmsys CLK_MM_DISP_OVL1>;
 			iommus = <&iommu M4U_PORT_DISP_OVL1>;
 			mediatek,larb = <&larb4>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
 		};
 
 		rdma0: rdma@1400e000 {
@@ -1016,6 +1025,7 @@ rdma0: rdma@1400e000 {
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
 			mediatek,larb = <&larb0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
 		};
 
 		rdma1: rdma@1400f000 {
@@ -1026,6 +1036,7 @@ rdma1: rdma@1400f000 {
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
 			mediatek,larb = <&larb4>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
 		};
 
 		rdma2: rdma@14010000 {
@@ -1036,6 +1047,7 @@ rdma2: rdma@14010000 {
 			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
 			mediatek,larb = <&larb4>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
 		};
 
 		wdma0: wdma@14011000 {
@@ -1046,6 +1058,7 @@ wdma0: wdma@14011000 {
 			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
 			mediatek,larb = <&larb0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
 		};
 
 		wdma1: wdma@14012000 {
@@ -1056,6 +1069,7 @@ wdma1: wdma@14012000 {
 			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
 			mediatek,larb = <&larb4>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
 		};
 
 		color0: color@14013000 {
@@ -1064,6 +1078,7 @@ color0: color@14013000 {
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
 		};
 
 		color1: color@14014000 {
@@ -1072,6 +1087,7 @@ color1: color@14014000 {
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_COLOR1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
 		};
 
 		aal@14015000 {
@@ -1080,6 +1096,7 @@ aal@14015000 {
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_AAL>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
 		};
 
 		gamma@14016000 {
@@ -1088,6 +1105,7 @@ gamma@14016000 {
 			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
 		};
 
 		merge@14017000 {
@@ -1193,6 +1211,8 @@ mutex: mutex@14020000 {
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_MUTEX_32K>;
+			mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+                                              <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
 		};
 
 		larb0: larb@14021000 {
@@ -1437,4 +1457,3 @@ larb5: larb@19001000 {
 		};
 	};
 };
-
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 97863adb7bc0..d946c1466c12 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -74,7 +74,7 @@ cpu0: cpu@0 {
 			reg = <0x000>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
 			dynamic-power-coefficient = <84>;
 			#cooling-cells = <2>;
 		};
@@ -85,7 +85,7 @@ cpu1: cpu@1 {
 			reg = <0x001>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
 			dynamic-power-coefficient = <84>;
 			#cooling-cells = <2>;
 		};
@@ -96,7 +96,7 @@ cpu2: cpu@2 {
 			reg = <0x002>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
 			dynamic-power-coefficient = <84>;
 			#cooling-cells = <2>;
 		};
@@ -107,7 +107,7 @@ cpu3: cpu@3 {
 			reg = <0x003>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
 			dynamic-power-coefficient = <84>;
 			#cooling-cells = <2>;
 		};
@@ -118,7 +118,7 @@ cpu4: cpu@100 {
 			reg = <0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
 			dynamic-power-coefficient = <211>;
 			#cooling-cells = <2>;
 		};
@@ -129,7 +129,7 @@ cpu5: cpu@101 {
 			reg = <0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
 			dynamic-power-coefficient = <211>;
 			#cooling-cells = <2>;
 		};
@@ -140,7 +140,7 @@ cpu6: cpu@102 {
 			reg = <0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
 			dynamic-power-coefficient = <211>;
 			#cooling-cells = <2>;
 		};
@@ -151,7 +151,7 @@ cpu7: cpu@103 {
 			reg = <0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
 			dynamic-power-coefficient = <211>;
 			#cooling-cells = <2>;
 		};
@@ -168,7 +168,15 @@ CPU_SLEEP: cpu-sleep {
 				min-residency-us = <800>;
 			};
 
-			CLUSTER_SLEEP: cluster-sleep {
+			CLUSTER_SLEEP0: cluster-sleep@0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <250>;
+				exit-latency-us = <400>;
+				min-residency-us = <1000>;
+			};
+			CLUSTER_SLEEP1: cluster-sleep@1 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x01010001>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index a0385a386a3f..9f3206c63900 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -990,7 +990,7 @@ power {
 	};
 
 	panel: panel {
-		compatible = "innolux,n116bge", "simple-panel";
+		compatible = "innolux,n116bge";
 		backlight = <&backlight>;
 		ddc-i2c-bus = <&dpaux>;
 	};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index da96de04d003..7a0fa157f48c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -221,7 +221,8 @@ pmic: pmic@3c {
 				compatible = "maxim,max77620";
 				reg = <0x3c>;
 
-				interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 
@@ -379,6 +380,10 @@ vdd_pex: ldo8 {
 						regulator-max-microvolt = <1050000>;
 					};
 				};
+
+				rtc {
+					wakeup-source;
+				};
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index f4ede86e32b4..e1ae01c2d039 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -644,6 +644,24 @@ usb3-3 {
 			};
 		};
 
+		usb@3550000 {
+			compatible = "nvidia,tegra194-xudc";
+			reg = <0x03550000 0x8000>,
+			      <0x03558000 0x1000>;
+			reg-names = "base", "fpci";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_DEV>,
+				 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_FS>;
+			clock-names = "dev", "ss", "ss_src", "fs_src";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBB>,
+					<&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "dev", "ss";
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			status = "disabled";
+		};
+
 		usb@3610000 {
 			compatible = "nvidia,tegra194-xusb";
 			reg = <0x03610000 0x40000>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 64c46ce3849d..a550e7b828e6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -895,6 +895,18 @@ mc: memory-controller@70019000 {
 		#iommu-cells = <1>;
 	};
 
+	emc: external-memory-controller@7001b000 {
+		compatible = "nvidia,tegra210-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>,
+		      <0x0 0x7001e000 0x0 0x1000>,
+		      <0x0 0x7001f000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA210_CLK_EMC>;
+		clock-names = "emc";
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		nvidia,memory-controller = <&mc>;
+		#cooling-cells = <2>;
+	};
+
 	sata@70020000 {
 		compatible = "nvidia,tegra210-ahci";
 		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
@@ -1550,6 +1562,18 @@ mem {
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
 
 			trips {
+				dram_nominal: mem-nominal-trip {
+					temperature = <50000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				dram_throttle: mem-throttle-trip {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "active";
+				};
+
 				mem-shutdown-trip {
 					temperature = <103000>;
 					hysteresis = <0>;
@@ -1558,10 +1582,15 @@ mem-shutdown-trip {
 			};
 
 			cooling-maps {
-				/*
-				 * There are currently no cooling maps,
-				 * because there are no cooling devices.
-				 */
+				dram-passive {
+					cooling-device = <&emc 0 0>;
+					trip = <&dram_nominal>;
+				};
+
+				dram-active {
+					cooling-device = <&emc 1 1>;
+					trip = <&dram_throttle>;
+				};
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cc103f7020fd..0f2c33d611df 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 06aab44d798c..14982762088d 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -51,6 +51,30 @@ chosen {
 		stdout-path = "serial0";
 	};
 
+	camera_vdddo_1v8: camera_vdddo_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdddo";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	camera_vdda_2v8: camera_vdda_2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdda";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	camera_vddd_1v5: camera_vddd_1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
 	reserved-memory {
 		ramoops@bff00000{
 			compatible = "ramoops";
@@ -538,6 +562,58 @@ button@0 {
 	};
 };
 
+&camss {
+	status = "ok";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			csiphy0_ep: endpoint {
+				clock-lanes = <1>;
+				data-lanes = <0 2>;
+				remote-endpoint = <&ov5640_ep>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&cci {
+	status = "ok";
+};
+
+&cci_i2c0 {
+	camera_rear@3b {
+		compatible = "ovti,ov5640";
+		reg = <0x3b>;
+
+		enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_rear_default>;
+
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "xclk";
+		clock-frequency = <23880000>;
+
+		vdddo-supply = <&camera_vdddo_1v8>;
+		vdda-supply = <&camera_vdda_2v8>;
+		vddd-supply = <&camera_vddd_1v5>;
+
+		/* No camera mezzanine by default */
+		status = "disabled";
+
+		port {
+			ov5640_ep: endpoint {
+				clock-lanes = <1>;
+				data-lanes = <0 2>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pm8916_0: pm8916@0 {
 		pon@800 {
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index af87350b5547..c4abbccf2bed 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -658,8 +658,8 @@ s10 {
 	s11 {
 		qcom,saw-leader;
 		regulator-always-on;
-		regulator-min-microvolt = <1230000>;
-		regulator-max-microvolt = <1230000>;
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
 	};
 };
 
@@ -908,10 +908,27 @@ &sdhc2 {
 	status = "okay";
 };
 
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "DB820c";
-	audio-routing =	"RX_BIAS", "MCLK";
+	audio-routing =	"RX_BIAS", "MCLK",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 70be3f95209b..6754cb0638f4 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -24,63 +24,61 @@ memory {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x0 0x20000000>;
 	};
+};
+
+&blsp1_i2c2 {
+	status = "ok";
+};
+
+&blsp1_spi1 {
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "ok";
+};
+
+&blsp1_uart5 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+	perst-gpio = <&tlmm 61 0x1>;
+};
+
+&pcie1 {
+	status = "ok";
+	perst-gpio = <&tlmm 58 0x1>;
+};
+
+&pcie_phy0 {
+	status = "ok";
+};
+
+&pcie_phy1 {
+	status = "ok";
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&qpic_nand {
+	status = "ok";
 
-	soc {
-		serial@78b3000 {
-			status = "ok";
-		};
-
-		spi@78b5000 {
-			status = "ok";
-
-			m25p80@0 {
-				  #address-cells = <1>;
-				  #size-cells = <1>;
-				  compatible = "jedec,spi-nor";
-				  reg = <0>;
-				  spi-max-frequency = <50000000>;
-			};
-		};
-
-		serial@78b1000 {
-			 status = "ok";
-		};
-
-		i2c@78b6000 {
-			 status = "ok";
-		};
-
-		dma@7984000 {
-			 status = "ok";
-		};
-
-		nand@79b0000 {
-			status = "ok";
-
-			nand@0 {
-				reg = <0>;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		phy@86000 {
-			status = "ok";
-		};
-
-		phy@8e000 {
-			status = "ok";
-		};
-
-		pci@20000000 {
-			status = "ok";
-			perst-gpio = <&tlmm 58 0x1>;
-		};
-
-		pci@10000000 {
-			status = "ok";
-			perst-gpio = <&tlmm 61 0x1>;
-		};
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2b31823d3ccd..5303821300b4 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -10,15 +10,111 @@ / {
 	model = "Qualcomm Technologies, Inc. IPQ8074";
 	compatible = "qcom,ipq8074";
 
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <0x2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
 	soc: soc {
 		#address-cells = <0x1>;
 		#size-cells = <0x1>;
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		pcie_phy0: phy@86000 {
+			compatible = "qcom,ipq8074-qmp-pcie-phy";
+			reg = <0x00086000 0x1000>;
+			#phy-cells = <0>;
+			clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "pipe_clk";
+			clock-output-names = "pcie20_phy0_pipe_clk";
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+			status = "disabled";
+		};
+
+		pcie_phy1: phy@8e000 {
+			compatible = "qcom,ipq8074-qmp-pcie-phy";
+			reg = <0x0008e000 0x1000>;
+			#phy-cells = <0>;
+			clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+			clock-names = "pipe_clk";
+			clock-output-names = "pcie20_phy1_pipe_clk";
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				<&gcc GCC_PCIE1PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq8074-pinctrl";
-			reg = <0x1000000 0x300000>;
+			reg = <0x01000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 70>;
@@ -66,102 +162,16 @@ qpic_pins: qpic-pins {
 			};
 		};
 
-		intc: interrupt-controller@b000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <0x3>;
-			reg = <0xb000000 0x1000>, <0xb002000 0x1000>;
-		};
-
-		timer {
-			compatible = "arm,armv8-timer";
-			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		};
-
-		timer@b120000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xb120000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@b120000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb121000 0x1000>,
-				      <0xb122000 0x1000>;
-			};
-
-			frame@b123000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb123000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b124000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb124000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b125000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb125000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b126000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb126000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b127000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb127000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b128000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb128000 0x1000>;
-				status = "disabled";
-			};
-		};
-
 		gcc: gcc@1800000 {
 			compatible = "qcom,gcc-ipq8074";
-			reg = <0x1800000 0x80000>;
+			reg = <0x01800000 0x80000>;
 			#clock-cells = <0x1>;
 			#reset-cells = <0x1>;
 		};
 
-		blsp1_uart5: serial@78b3000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78b3000 0x200>;
-			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-0 = <&serial_4_pins>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
 		blsp_dma: dma@7884000 {
 			compatible = "qcom,bam-v1.7.0";
-			reg = <0x7884000 0x2b000>;
+			reg = <0x07884000 0x2b000>;
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "bam_clk";
@@ -171,7 +181,7 @@ blsp_dma: dma@7884000 {
 
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78af000 0x200>;
+			reg = <0x078af000 0x200>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
@@ -181,7 +191,7 @@ blsp1_uart1: serial@78af000 {
 
 		blsp1_uart3: serial@78b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78b1000 0x200>;
+			reg = <0x078b1000 0x200>;
 			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
 				<&gcc GCC_BLSP1_AHB_CLK>;
@@ -194,11 +204,23 @@ blsp1_uart3: serial@78b1000 {
 			status = "disabled";
 		};
 
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b3000 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-0 = <&serial_4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x78b5000 0x600>;
+			reg = <0x078b5000 0x600>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			spi-max-frequency = <50000000>;
 			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
@@ -215,7 +237,7 @@ blsp1_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x78b6000 0x600>;
+			reg = <0x078b6000 0x600>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
@@ -232,7 +254,7 @@ blsp1_i2c3: i2c@78b7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x78b7000 0x600>;
+			reg = <0x078b7000 0x600>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
@@ -245,7 +267,7 @@ blsp1_i2c3: i2c@78b7000 {
 
 		qpic_bam: dma@7984000 {
 			compatible = "qcom,bam-v1.7.0";
-			reg = <0x7984000 0x1a000>;
+			reg = <0x07984000 0x1a000>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_QPIC_AHB_CLK>;
 			clock-names = "bam_clk";
@@ -256,7 +278,7 @@ qpic_bam: dma@7984000 {
 
 		qpic_nand: nand@79b0000 {
 			compatible = "qcom,ipq8074-nand";
-			reg = <0x79b0000 0x10000>;
+			reg = <0x079b0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&gcc GCC_QPIC_CLK>,
@@ -272,104 +294,85 @@ qpic_nand: nand@79b0000 {
 			status = "disabled";
 		};
 
-		pcie_phy0: phy@86000 {
-			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x86000 0x1000>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
-			clock-names = "pipe_clk";
-			clock-output-names = "pcie20_phy0_pipe_clk";
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <0x3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+		};
 
-			resets = <&gcc GCC_PCIE0_PHY_BCR>,
-				<&gcc GCC_PCIE0PHY_PHY_BCR>;
-			reset-names = "phy",
-				      "common";
-			status = "disabled";
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
-		pcie0: pci@20000000 {
-			compatible = "qcom,pcie-ipq8074";
-			reg =  <0x20000000 0xf1d
-				0x20000f20 0xa8
-				0x80000 0x2000
-				0x20100000 0x1000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			clock-frequency = <19200000>;
 
-			phys = <&pcie_phy0>;
-			phy-names = "pciephy";
+			frame@b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
 
-			ranges = <0x81000000 0 0x20200000 0x20200000
-				  0 0x100000   /* downstream I/O */
-				  0x82000000 0 0x20300000 0x20300000
-				  0 0xd00000>; /* non-prefetchable memory */
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b123000 0x1000>;
+				status = "disabled";
+			};
 
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
-					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
 
-			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
-				 <&gcc GCC_PCIE0_AXI_M_CLK>,
-				 <&gcc GCC_PCIE0_AXI_S_CLK>,
-				 <&gcc GCC_PCIE0_AHB_CLK>,
-				 <&gcc GCC_PCIE0_AUX_CLK>;
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
 
-			clock-names = "iface",
-				      "axi_m",
-				      "axi_s",
-				      "ahb",
-				      "aux";
-			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
-				 <&gcc GCC_PCIE0_SLEEP_ARES>,
-				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
-				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
-				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
-				 <&gcc GCC_PCIE0_AHB_ARES>,
-				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
-			reset-names = "pipe",
-				      "sleep",
-				      "sticky",
-				      "axi_m",
-				      "axi_s",
-				      "ahb",
-				      "axi_m_sticky";
-			status = "disabled";
-		};
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
 
-		pcie_phy1: phy@8e000 {
-			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x8e000 0x1000>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
-			clock-names = "pipe_clk";
-			clock-output-names = "pcie20_phy1_pipe_clk";
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b127000 0x1000>;
+				status = "disabled";
+			};
 
-			resets = <&gcc GCC_PCIE1_PHY_BCR>,
-				<&gcc GCC_PCIE1PHY_PHY_BCR>;
-			reset-names = "phy",
-				      "common";
-			status = "disabled";
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
 		};
 
 		pcie1: pci@10000000 {
 			compatible = "qcom,pcie-ipq8074";
 			reg =  <0x10000000 0xf1d
 				0x10000f20 0xa8
-				0x88000 0x2000
+				0x00088000 0x2000
 				0x10100000 0x1000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
@@ -426,71 +429,68 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 				      "axi_m_sticky";
 			status = "disabled";
 		};
-	};
-
-	cpus {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			enable-method = "psci";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-		};
 
-		CPU2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			enable-method = "psci";
-			reg = <0x2>;
-			next-level-cache = <&L2_0>;
-		};
-
-		CPU3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			enable-method = "psci";
-			reg = <0x3>;
-			next-level-cache = <&L2_0>;
-		};
+		pcie0: pci@20000000 {
+			compatible = "qcom,pcie-ipq8074";
+			reg =  <0x20000000 0xf1d
+				0x20000f20 0xa8
+				0x00080000 0x2000
+				0x20100000 0x1000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
 
-		L2_0: l2-cache {
-			compatible = "cache";
-			cache-level = <0x2>;
-		};
-	};
+			phys = <&pcie_phy0>;
+			phy-names = "pciephy";
 
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
+			ranges = <0x81000000 0 0x20200000 0x20200000
+				  0 0x100000   /* downstream I/O */
+				  0x82000000 0 0x20300000 0x20300000
+				  0 0xd00000>; /* non-prefetchable memory */
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 75
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 78
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 79
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 83
+					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
-	clocks {
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
+			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+				 <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>;
 
-		xo: xo {
-			compatible = "fixed-clock";
-			clock-frequency = <19200000>;
-			#clock-cells = <0>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "aux";
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_SLEEP_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky";
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index a88a15f2352b..8b429954ea29 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/arm/coresight-cti-dt.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
@@ -165,6 +166,9 @@ CPU_SLEEP_0: cpu-sleep-0 {
 				min-residency-us = <2000>;
 				local-timer-stop;
 			};
+		};
+
+		domain-idle-states {
 
 			CLUSTER_RET: cluster-retention {
 				compatible = "domain-idle-state";
@@ -188,31 +192,31 @@ psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: cpu-pd0 {
+		CPU_PD0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
 			domain-idle-states = <&CPU_SLEEP_0>;
 		};
 
-		CPU_PD1: cpu-pd1 {
+		CPU_PD1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
 			domain-idle-states = <&CPU_SLEEP_0>;
 		};
 
-		CPU_PD2: cpu-pd2 {
+		CPU_PD2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
 			domain-idle-states = <&CPU_SLEEP_0>;
 		};
 
-		CPU_PD3: cpu-pd3 {
+		CPU_PD3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
 			domain-idle-states = <&CPU_SLEEP_0>;
 		};
 
-		CLUSTER_PD: cluster-pd {
+		CLUSTER_PD: power-domain-cluster {
 			#power-domain-cells = <0>;
 			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
 		};
@@ -261,7 +265,7 @@ cpu2_3-thermal {
 			thermal-sensors = <&tsens 4>;
 
 			trips {
-				cpu2_3_alert0: trip-point@0 {
+				cpu2_3_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -291,7 +295,7 @@ gpu-thermal {
 			thermal-sensors = <&tsens 2>;
 
 			trips {
-				gpu_alert0: trip-point@0 {
+				gpu_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -311,7 +315,7 @@ camera-thermal {
 			thermal-sensors = <&tsens 1>;
 
 			trips {
-				cam_alert0: trip-point@0 {
+				cam_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -326,7 +330,7 @@ modem-thermal {
 			thermal-sensors = <&tsens 0>;
 
 			trips {
-				modem_alert0: trip-point@0 {
+				modem_alert0: trip-point0 {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -1424,7 +1428,7 @@ debug@856000 {
 			cpu = <&CPU3>;
 		};
 
-		etm@85c000 {
+		etm0: etm@85c000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x85c000 0x1000>;
 
@@ -1443,7 +1447,7 @@ etm0_out: endpoint {
 			};
 		};
 
-		etm@85d000 {
+		etm1: etm@85d000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x85d000 0x1000>;
 
@@ -1462,7 +1466,7 @@ etm1_out: endpoint {
 			};
 		};
 
-		etm@85e000 {
+		etm2: etm@85e000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x85e000 0x1000>;
 
@@ -1481,7 +1485,7 @@ etm2_out: endpoint {
 			};
 		};
 
-		etm@85f000 {
+		etm3: etm@85f000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x85f000 0x1000>;
 
@@ -1500,6 +1504,82 @@ etm3_out: endpoint {
 			};
 		};
 
+		/* System CTIs */
+		/* CTI 0 - TMC connections */
+		cti@810000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x810000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+		};
+
+		/* CTI 1 - TPIU connections */
+		cti@811000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x811000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+		};
+
+		/* CTIs 2-11 - no information - not instantiated */
+
+		/* Core CTIs; CTIs 12-15 */
+		/* CTI - CPU-0 */
+		cti@858000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x858000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+			arm,cs-dev-assoc = <&etm0>;
+
+		};
+
+		/* CTI - CPU-1 */
+		cti@859000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x859000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+			arm,cs-dev-assoc = <&etm1>;
+		};
+
+		/* CTI - CPU-2 */
+		cti@85a000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x85a000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+			arm,cs-dev-assoc = <&etm2>;
+		};
+
+		/* CTI - CPU-3 */
+		cti@85b000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x85b000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+			arm,cs-dev-assoc = <&etm3>;
+		};
+
+
 		venus: video-codec@1d00000 {
 			compatible = "qcom,msm8916-venus";
 			reg = <0x01d00000 0xff000>;
@@ -1601,6 +1681,33 @@ ports {
 				#size-cells = <0>;
 			};
 		};
+
+		cci: cci@1b0c000 {
+			compatible = "qcom,msm8916-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1b0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				<&gcc GCC_CAMSS_CCI_AHB_CLK>,
+				<&gcc GCC_CAMSS_CCI_CLK>,
+				<&gcc GCC_CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb", "cci_ahb",
+					  "cci", "camss_ahb";
+			assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+					  <&gcc GCC_CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <19200000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&cci0_default>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
 	};
 
 	smd {
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 14827adebd94..93b19aff7135 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2066,6 +2066,8 @@ q6asm: q6asm {
 						reg = <APR_SVC_ASM>;
 						q6asmdai: dais {
 							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#sound-dai-cells = <1>;
 							iommus = <&lpass_q6_smmu 1>;
 						};
@@ -2178,7 +2180,7 @@ cpu0-thermal {
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu0_alert0: trip-point@0 {
+				cpu0_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -2199,7 +2201,7 @@ cpu1-thermal {
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				cpu1_alert0: trip-point@0 {
+				cpu1_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -2220,7 +2222,7 @@ cpu2-thermal {
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				cpu2_alert0: trip-point@0 {
+				cpu2_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -2241,7 +2243,7 @@ cpu3-thermal {
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu3_alert0: trip-point@0 {
+				cpu3_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -2262,7 +2264,7 @@ gpu-thermal-top {
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
-				gpu1_alert0: trip-point@0 {
+				gpu1_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -2277,7 +2279,7 @@ gpu-thermal-bottom {
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
-				gpu2_alert0: trip-point@0 {
+				gpu2_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -2292,7 +2294,7 @@ m4m-thermal {
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				m4m_alert0: trip-point@0 {
+				m4m_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -2307,7 +2309,7 @@ l3-or-venus-thermal {
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				l3_or_venus_alert0: trip-point@0 {
+				l3_or_venus_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -2322,7 +2324,7 @@ cluster0-l2-thermal {
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
-				cluster0_l2_alert0: trip-point@0 {
+				cluster0_l2_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -2337,7 +2339,7 @@ cluster1-l2-thermal {
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
-				cluster1_l2_alert0: trip-point@0 {
+				cluster1_l2_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -2352,7 +2354,7 @@ camera-thermal {
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
-				camera_alert0: trip-point@0 {
+				camera_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -2367,7 +2369,7 @@ q6-dsp-thermal {
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
-				q6_dsp_alert0: trip-point@0 {
+				q6_dsp_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -2382,7 +2384,7 @@ mem-thermal {
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
-				mem_alert0: trip-point@0 {
+				mem_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -2397,7 +2399,7 @@ modemtx-thermal {
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
-				modemtx_alert0: trip-point@0 {
+				modemtx_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c07fee6fd7eb..c45870600909 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -500,7 +500,7 @@ cpu0-thermal {
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				cpu0_alert0: trip-point@0 {
+				cpu0_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -521,7 +521,7 @@ cpu1-thermal {
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				cpu1_alert0: trip-point@0 {
+				cpu1_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -542,7 +542,7 @@ cpu2-thermal {
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu2_alert0: trip-point@0 {
+				cpu2_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -563,7 +563,7 @@ cpu3-thermal {
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				cpu3_alert0: trip-point@0 {
+				cpu3_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -584,7 +584,7 @@ cpu4-thermal {
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
-				cpu4_alert0: trip-point@0 {
+				cpu4_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -605,7 +605,7 @@ cpu5-thermal {
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				cpu5_alert0: trip-point@0 {
+				cpu5_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -626,7 +626,7 @@ cpu6-thermal {
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				cpu6_alert0: trip-point@0 {
+				cpu6_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -647,7 +647,7 @@ cpu7-thermal {
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu7_alert0: trip-point@0 {
+				cpu7_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -668,7 +668,7 @@ gpu-thermal-bottom {
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
-				gpu1_alert0: trip-point@0 {
+				gpu1_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -683,7 +683,7 @@ gpu-thermal-top {
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
-				gpu2_alert0: trip-point@0 {
+				gpu2_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -698,7 +698,7 @@ clust0-mhm-thermal {
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				cluster0_mhm_alert0: trip-point@0 {
+				cluster0_mhm_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -713,7 +713,7 @@ clust1-mhm-thermal {
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
-				cluster1_mhm_alert0: trip-point@0 {
+				cluster1_mhm_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -728,7 +728,7 @@ cluster1-l2-thermal {
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
-				cluster1_l2_alert0: trip-point@0 {
+				cluster1_l2_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -743,7 +743,7 @@ modem-thermal {
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
-				modem_alert0: trip-point@0 {
+				modem_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -758,7 +758,7 @@ mem-thermal {
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
-				mem_alert0: trip-point@0 {
+				mem_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -773,7 +773,7 @@ wlan-thermal {
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
-				wlan_alert0: trip-point@0 {
+				wlan_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -788,7 +788,7 @@ q6-dsp-thermal {
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
-				q6_dsp_alert0: trip-point@0 {
+				q6_dsp_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -803,7 +803,7 @@ camera-thermal {
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
-				camera_alert0: trip-point@0 {
+				camera_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -818,7 +818,7 @@ multimedia-thermal {
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
-				multimedia_alert0: trip-point@0 {
+				multimedia_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index b6e304748a57..c0b197458665 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -73,18 +73,8 @@ pm8150_gpios: gpio@c000 {
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 322379d5c31f..40b5d75a4a1d 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -62,18 +62,8 @@ pm8150b_gpios: gpio@c000 {
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index eb0e9a090e42..cf05e0685d10 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -56,18 +56,8 @@ pm8150l_gpios: gpio@c000 {
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index afe69e8f3114..6422cf9d5855 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -4,6 +4,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include "qcs404.dtsi"
 #include "pms405.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	aliases {
@@ -31,6 +33,21 @@ vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
+
+	usb3_vbus_reg: regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_BOOST_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_vbus_boost_pin>;
+		vin-supply = <&vph_pwr>;
+		enable-active-high;
+
+		/* TODO: Drop this when introducing role switching */
+		regulator-always-on;
+	};
 };
 
 &blsp1_uart3 {
@@ -186,7 +203,7 @@ vreg_l11_sdc2: l11 {
 		};
 
 		vreg_l12_3p3: l12 {
-			regulator-min-microvolt = <2968000>;
+			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 		};
 
@@ -270,6 +287,72 @@ rclk {
 			bias-pull-down;
 		};
 	};
+
+	usb3_id_pin: usb3-id-pin {
+		pinmux {
+			pins = "gpio116";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio116";
+			drive-strength = <2>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+};
+
+&pms405_gpios {
+	usb_vbus_boost_pin: usb-vbus-boost-pin {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <1>;
+		};
+	};
+	usb3_vbus_pin: usb3-vbus-pin {
+		pinconf {
+			pins = "gpio12";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			power-source = <1>;
+		};
+	};
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb2_phy_sec {
+	vdd-supply = <&vreg_l4_1p2>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	vdda3p3-supply = <&vreg_l12_3p3>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+
+	dwc3@7580000 {
+		dr_mode = "host";
+	};
+};
+
+&usb2_phy_prim {
+	vdd-supply = <&vreg_l4_1p2>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	vdda3p3-supply = <&vreg_l12_3p3>;
+	status = "okay";
+};
+
+&usb3_phy {
+	vdd-supply = <&vreg_l3_1p05>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	status = "okay";
 };
 
 &wifi {
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index f149a538c1cc..c685a1664810 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -323,6 +323,48 @@ rpm_msg_ram: memory@60000 {
 			reg = <0x00060000 0x6000>;
 		};
 
+		usb3_phy: phy@78000 {
+			compatible = "qcom,usb-ss-28nm-phy";
+			reg = <0x00078000 0x400>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "ref", "ahb", "pipe";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "com", "phy";
+			status = "disabled";
+		};
+
+		usb2_phy_prim: phy@7a000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0007a000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+				 <&gcc GCC_USB2A_PHY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		usb2_phy_sec: phy@7c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0007c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
 		qfprom: qfprom@a4000 {
 			compatible = "qcom,qfprom";
 			reg = <0x000a4000 0x1000>;
@@ -486,6 +528,64 @@ glink-edge {
 			};
 		};
 
+		usb3: usb@7678800 {
+			compatible = "qcom,dwc3";
+			reg = <0x07678800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "core", "iface", "sleep", "mock_utmi";
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+			status = "disabled";
+
+			dwc3@7580000 {
+				compatible = "snps,dwc3";
+				reg = <0x07580000 0xcd00>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy_sec>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				dr_mode = "otg";
+			};
+		};
+
+		usb2: usb@79b8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x079b8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
+				 <&gcc GCC_PCNOC_USB2_CLK>,
+				 <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "core", "iface", "sleep", "mock_utmi";
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+			status = "disabled";
+
+			dwc3@78c0000 {
+				compatible = "snps,dwc3";
+				reg = <0x078c0000 0xcc00>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy_prim>;
+				phy-names = "usb2-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				dr_mode = "peripheral";
+			};
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,qcs404-pinctrl";
 			reg = <0x01000000 0x200000>,
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 043c9b9b5024..4dd8ebc22448 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -310,9 +310,11 @@ &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l11a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
 	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
 	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,bias-ctrl-value = <0x22>;
+	qcom,charge-ctrl-value = <3>;
+	qcom,hsdisc-trim-value = <0>;
 };
 
 &usb_1_qmpphy {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 998f101ad623..4216b574c080 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sc7180.h>
+#include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-aoss-qmp.h>
@@ -91,9 +92,12 @@ cpus {
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo468";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_0>;
@@ -110,9 +114,12 @@ L3_0: l3-cache {
 
 		CPU1: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo468";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_100>;
@@ -126,9 +133,12 @@ L2_100: l2-cache {
 
 		CPU2: cpu@200 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo468";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_200>;
@@ -142,9 +152,12 @@ L2_200: l2-cache {
 
 		CPU3: cpu@300 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo468";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_300>;
@@ -158,9 +171,12 @@ L2_300: l2-cache {
 
 		CPU4: cpu@400 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo468";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_400>;
@@ -174,9 +190,12 @@ L2_400: l2-cache {
 
 		CPU5: cpu@500 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo468";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_500>;
@@ -190,9 +209,12 @@ L2_500: l2-cache {
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo468";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1740>;
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_600>;
@@ -206,9 +228,12 @@ L2_600: l2-cache {
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "arm,armv8";
+			compatible = "qcom,kryo468";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1740>;
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_700>;
@@ -255,6 +280,60 @@ core7 {
 				};
 			};
 		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "cluster-power-down";
+				arm,psci-suspend-param = <0x40003444>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9926>;
+				local-timer-stop;
+			};
+		};
 	};
 
 	memory@80000000 {
@@ -1294,6 +1373,491 @@ pinconf-sd-cd {
 			};
 		};
 
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,sc7180-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint = <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&swao_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&swao_replicator_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06b04000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					swao_funnel_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@6b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b05000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&swao_replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&swao_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b06000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_replicator_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint = <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint = <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -1312,20 +1876,6 @@ sdhc_2: sdhci@8804000 {
 			status = "disabled";
 		};
 
-		gpucc: clock-controller@5090000 {
-			compatible = "qcom,sc7180-gpucc";
-			reg = <0 0x05090000 0 0x9000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
-				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
-			clock-names = "bi_tcxo",
-				      "gcc_gpu_gpll0_clk_src",
-				      "gcc_gpu_gpll0_div_clk_src";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
 		qspi: spi@88dc000 {
 			compatible = "qcom,qspi-v1";
 			reg = <0 0x088dc000 0 0x600>;
@@ -1339,7 +1889,7 @@ qspi: spi@88dc000 {
 		};
 
 		usb_1_hsphy: phy@88e3000 {
-			compatible = "qcom,sc7180-qusb2-phy";
+			compatible = "qcom,sc7180-qusb2-phy", "qcom,qusb2-v2-phy";
 			reg = <0 0x088e3000 0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
@@ -1475,6 +2025,9 @@ venus: video-codec@aa00000 {
 				      "vcodec0_core", "vcodec0_bus";
 			iommus = <&apps_smmu 0x0c00 0x60>;
 			memory-region = <&venus_mem>;
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>,
+					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>;
+			interconnect-names = "video-mem", "cpu-cfg";
 
 			video-decoder {
 				compatible = "venus-decoder";
@@ -1544,8 +2097,12 @@ mdp: mdp@ae01000 {
 				clock-names = "iface", "rot", "lut", "core",
 					      "vsync";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+						  <&dispcc DISP_CC_MDSS_ROT_CLK>,
+						  <&dispcc DISP_CC_MDSS_AHB_CLK>;
 				assigned-clock-rates = <300000000>,
+						       <19200000>,
+						       <19200000>,
 						       <19200000>;
 
 				interrupt-parent = <&mdss>;
@@ -2011,8 +2568,8 @@ cpufreq_hw: cpufreq@18323000 {
 
 	thermal-zones {
 		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -2059,8 +2616,8 @@ map1 {
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -2107,8 +2664,8 @@ map1 {
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -2155,8 +2712,8 @@ map1 {
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -2203,8 +2760,8 @@ map1 {
 		};
 
 		cpu4-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -2251,8 +2808,8 @@ map1 {
 		};
 
 		cpu5-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -2299,8 +2856,8 @@ map1 {
 		};
 
 		cpu6-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -2339,8 +2896,8 @@ map1 {
 		};
 
 		cpu7-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -2379,8 +2936,8 @@ map1 {
 		};
 
 		cpu8-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -2419,8 +2976,8 @@ map1 {
 		};
 
 		cpu9-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -2459,8 +3016,8 @@ map1 {
 		};
 
 		aoss0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -2480,8 +3037,8 @@ aoss0_crit: aoss0_crit {
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -2500,8 +3057,8 @@ cpuss0_crit: cluster0_crit {
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -2520,8 +3077,8 @@ cpuss1_crit: cluster0_crit {
 		};
 
 		gpuss0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -2541,8 +3098,8 @@ gpuss0_crit: gpuss0_crit {
 		};
 
 		gpuss1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -2562,8 +3119,8 @@ gpuss1_crit: gpuss1_crit {
 		};
 
 		aoss1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -2583,8 +3140,8 @@ aoss1_crit: aoss1_crit {
 		};
 
 		cwlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -2604,8 +3161,8 @@ cwlan_crit: cwlan_crit {
 		};
 
 		audio-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -2625,8 +3182,8 @@ audio_crit: audio_crit {
 		};
 
 		ddr-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -2646,8 +3203,8 @@ ddr_crit: ddr_crit {
 		};
 
 		q6-hvx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -2667,8 +3224,8 @@ q6_hvx_crit: q6_hvx_crit {
 		};
 
 		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -2688,8 +3245,8 @@ camera_crit: camera_crit {
 		};
 
 		mdm-core-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -2709,8 +3266,8 @@ mdm_crit: mdm_crit {
 		};
 
 		mdm-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -2730,8 +3287,8 @@ mdm_dsp_crit: mdm_dsp_crit {
 		};
 
 		npu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -2751,8 +3308,8 @@ npu_crit: npu_crit {
 		};
 
 		video-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 9>;
 
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
new file mode 100644
index 000000000000..76533e8b2092
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sdm660.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 7";
+	compatible = "xiaomi,lavender", "qcom,sdm660";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xa0000000 0x0 0x400000>;
+			console-size = <0x20000>;
+			record-size = <0x20000>;
+			ftrace-size = <0x0>;
+			pmsg-size = <0x20000>;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart_console_active>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <8 4>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
new file mode 100644
index 000000000000..4abbdd03d1e7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2018, Craig Tatlor.
+ * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+			L1_I_100: l1-icache {
+				compatible = "cache";
+			};
+			L1_D_100: l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			L1_I_101: l1-icache {
+				compatible = "cache";
+			};
+			L1_D_101: l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			L1_I_102: l1-icache {
+				compatible = "cache";
+			};
+			L1_D_102: l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			L1_I_103: l1-icache {
+				compatible = "cache";
+			};
+			L1_D_103: l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU4: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <640>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+			L1_I_0: l1-icache {
+				compatible = "cache";
+			};
+			L1_D_0: l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU5: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <640>;
+			next-level-cache = <&L2_0>;
+			L1_I_1: l1-icache {
+				compatible = "cache";
+			};
+			L1_D_1: l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU6: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <640>;
+			next-level-cache = <&L2_0>;
+			L1_I_2: l1-icache {
+				compatible = "cache";
+			};
+			L1_D_2: l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU7: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <640>;
+			next-level-cache = <&L2_0>;
+			L1_I_3: l1-icache {
+				compatible = "cache";
+			};
+			L1_D_3: l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm660";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00100000 0x94000>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,sdm660-pinctrl";
+			reg = <0x03100000 0x400000>,
+			      <0x03500000 0x400000>,
+			      <0x03900000 0x400000>;
+			reg-names = "south", "center", "north";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 114>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart_console_active: uart_console_active {
+				pinmux {
+					pins = "gpio4", "gpio5";
+					function = "blsp_uart2";
+				};
+
+				pinconf {
+					pins = "gpio4", "gpio5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+		};
+
+		spmi_bus: spmi@800f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0800f000 0x1000>,
+			      <0x08400000 0x1000000>,
+			      <0x09400000 0x1000000>,
+			      <0x0a400000 0x220000>,
+			      <0x0800a000 0x3000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		blsp1_uart2: serial@c170000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c170000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		timer@17920000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17920000 0x1000>;
+
+			frame@17921000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17921000 0x1000>,
+				      <0x17922000 0x1000>;
+			};
+
+			frame@17923000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17923000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17924000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17924000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17925000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17925000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17926000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17926000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17927000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17927000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17928000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17928000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x17a00000 0x10000>,
+			      <0x17b00000 0x100000>;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a2e05926b429..c00797bd3b07 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -112,6 +112,40 @@ pcie0_1p05v: pcie-0-1p05v-regulator {
 		// enable-active-high;
 	};
 
+	cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM0_DVDD_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		enable-active-high;
+		gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
+		vin-supply = <&vbat>;
+	};
+
+	cam0_avdd_2v8: reg_cam0_avdd_2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM0_AVDD_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_avdd_2v8_en_default>;
+		vin-supply = <&vbat>;
+	};
+
+	/* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
+	cam3_avdd_2v8: reg_cam3_avdd_2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM3_AVDD_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vbat>;
+	};
+
 	pcie0_3p3v_dual: vldo-3v3-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VLDO_3V3";
@@ -412,6 +446,52 @@ &pcie1_phy {
 };
 
 &pm8998_gpio {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"WLAN_SW_CTRL",
+		"NC",
+		"PM_GPIO5_BLUE_BT_LED",
+		"VOL_UP_N",
+		"NC",
+		"ADC_IN1",
+		"PM_GPIO9_YEL_WIFI_LED",
+		"CAM0_AVDD_EN",
+		"NC",
+		"CAM0_DVDD_EN",
+		"PM_GPIO13_GREEN_U4_LED",
+		"DIV_CLK2",
+		"NC",
+		"NC",
+		"NC",
+		"SMB_STAT",
+		"NC",
+		"NC",
+		"ADC_IN2",
+		"OPTION1",
+		"WCSS_PWR_REQ",
+		"PM845_GPIO24",
+		"OPTION2",
+		"PM845_SLB";
+
+	cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en {
+		pins = "gpio12";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	cam0_avdd_2v8_en_default: cam0-avdd-2v8-en {
+		pins = "gpio10";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
 	vol_up_pin_a: vol-up-active {
 		pins = "gpio6";
 		function = "normal";
@@ -442,17 +522,14 @@ qi2s@22 {
 &q6asmdai {
 	dai@0 {
 		reg = <0>;
-		direction = <2>;
 	};
 
 	dai@1 {
 		reg = <1>;
-		direction = <2>;
 	};
 
 	dai@2 {
 		reg = <2>;
-		direction = <1>;
 	};
 
 	dai@3 {
@@ -573,6 +650,42 @@ &spi2 {
 };
 
 &tlmm {
+	cam0_default: cam0_default {
+		rst {
+			pins = "gpio9";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		mclk0 {
+			pins = "gpio13";
+			function = "cam_mclk";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	cam3_default: cam3_default {
+		rst {
+			function = "gpio";
+			pins = "gpio21";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		mclk3 {
+			function = "cam_mclk";
+			pins = "gpio16";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
 	pcie0_default_state: pcie0-default {
 		clkreq {
 			pins = "gpio36";
@@ -866,3 +979,97 @@ pinconf-rx {
 		bias-pull-up;
 	};
 };
+
+&pm8998_gpio {
+
+};
+
+&cci {
+	status = "ok";
+};
+
+&cci_i2c0 {
+	camera@10 {
+		compatible = "ovti,ov8856";
+		reg = <0x10>;
+
+		// CAM0_RST_N
+		reset-gpios = <&tlmm 9 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_default>;
+		gpios = <&tlmm 13 0>,
+			<&tlmm 9 0>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+		clock-names = "xvclk";
+		clock-frequency = <19200000>;
+
+		/* The &vreg_s4a_1p8 trace is powered on as a,
+		 * so it is represented by a fixed regulator.
+		 *
+		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators
+		 * both have to be enabled through the power management
+		 * gpios.
+		 */
+		power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+		dovdd-supply = <&vreg_lvs1a_1p8>;
+		avdd-supply = <&cam0_avdd_2v8>;
+		dvdd-supply = <&cam0_dvdd_1v2>;
+
+		status = "disable";
+
+		port {
+			ov8856_ep: endpoint {
+				clock-lanes = <1>;
+				link-frequencies = /bits/ 64
+					<360000000 180000000>;
+				data-lanes = <1 2 3 4>;
+//				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};
+
+&cci_i2c1 {
+	camera@60 {
+		compatible = "ovti,ov7251";
+
+		// I2C address as per ov7251.txt linux documentation
+		reg = <0x60>;
+
+		// CAM3_RST_N
+		enable-gpios = <&tlmm 21 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam3_default>;
+		gpios = <&tlmm 16 0>,
+			<&tlmm 21 0>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+
+		/* The &vreg_s4a_1p8 trace always powered on.
+		 *
+		 * The 2.8V vdda-supply regulator is enabled when the
+		 * vreg_s4a_1p8 trace is pulled high.
+		 * It too is represented by a fixed regulator.
+		 *
+		 * No 1.2V vddd-supply regulator is used.
+		 */
+		power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+		vdddo-supply = <&vreg_lvs1a_1p8>;
+		vdda-supply = <&cam3_avdd_2v8>;
+
+		status = "disable";
+
+		port {
+			ov7251_ep: endpoint {
+				clock-lanes = <1>;
+				data-lanes = <0 1>;
+//				remote-endpoint = <&csiphy3_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8f926b5234d4..71dfdfcf2033 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -5,6 +5,7 @@
  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
@@ -1813,6 +1814,42 @@ tlmm: pinctrl@3400000 {
 			gpio-ranges = <&tlmm 0 0 150>;
 			wakeup-parent = <&pdc_intc>;
 
+			cci0_default: cci0-default {
+				/* SDA, SCL */
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci0_sleep: cci0-sleep {
+				/* SDA, SCL */
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+
+				drive-strength = <2>; /* 2 mA */
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default {
+				/* SDA, SCL */
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci1_sleep: cci1-sleep {
+				/* SDA, SCL */
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+
+				drive-strength = <2>; /* 2 mA */
+				bias-pull-down;
+			};
+
 			qspi_clk: qspi-clk {
 				pinmux {
 					pins = "gpio95";
@@ -2970,7 +3007,7 @@ sound: sound {
 		};
 
 		usb_1_hsphy: phy@88e2000 {
-			compatible = "qcom,sdm845-qusb2-phy";
+			compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
 			reg = <0 0x088e2000 0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
@@ -2985,7 +3022,7 @@ usb_1_hsphy: phy@88e2000 {
 		};
 
 		usb_2_hsphy: phy@88e3000 {
-			compatible = "qcom,sdm845-qusb2-phy";
+			compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
 			reg = <0 0x088e3000 0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
@@ -3194,6 +3231,61 @@ videocc: clock-controller@ab00000 {
 			#reset-cells = <1>;
 		};
 
+		cci: cci@ac4a000 {
+			compatible = "qcom,sdm845-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4a000 0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+			clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_SOC_AHB_CLK>,
+				<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				"soc_ahb",
+				"slow_ahb_src",
+				"cpas_ahb",
+				"cci",
+				"cci_src";
+
+			assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		clock_camcc: clock-controller@ad00000 {
+			compatible = "qcom,sdm845-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: mdss@ae00000 {
 			compatible = "qcom,sdm845-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 3b617a75fafa..51a670ad15b2 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -359,12 +359,10 @@ &qupv3_id_1 {
 &q6asmdai {
 	dai@0 {
 		reg = <0>;
-		direction = <2>;
 	};
 
 	dai@1 {
 		reg = <1>;
-		direction = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 224d0f1ea6f9..cff7a85890ee 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8250.dtsi"
 
 / {
@@ -18,6 +19,336 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	pm8150-rpmh-regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p875: ldo5 {
+			regulator-name = "vreg_l5a_0p875";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p7: ldo7 {
+			regulator-name = "vreg_l7a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p75: ldo11 {
+			regulator-name = "vreg_l11a_0p75";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_ts_3p0: ldo13 {
+			regulator-name = "vreg_l13a_ts_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_11ad_io_1p8: ldo15 {
+			regulator-name = "vreg_l15a_11ad_io_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8150l-rpmh-regulators {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-name = "vreg_s8c_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p2: ldo2 {
+			regulator-name = "vreg_l2c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p92: ldo3 {
+			regulator-name = "vreg_l3c_0p92";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p7: ldo4 {
+			regulator-name = "vreg_l4c_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_cam_vcm0_2p85: ldo7 {
+			regulator-name = "vreg_l7c_cam_vcm0_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p0: ldo10 {
+			regulator-name = "vreg_l10c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-name = "vreg_l11c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8009-rpmh-regulators {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_l1f_cam_dvdd1_1p1: ldo1 {
+			regulator-name = "vreg_l1f_cam_dvdd1_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_cam_dvdd0_1p2: ldo2 {
+			regulator-name = "vreg_l2f_cam_dvdd0_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_cam_dvdd2_1p05: ldo3 {
+			regulator-name = "vreg_l3f_cam_dvdd2_1p05";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_cam_avdd0_2p85: ldo5 {
+			regulator-name = "vreg_l5f_cam_avdd0_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_cam_avdd1_2p85: ldo6 {
+			regulator-name = "vreg_l6f_cam_avdd1_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <2856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &qupv3_id_1 {
@@ -27,3 +358,23 @@ &qupv3_id_1 {
 &uart2 {
 	status = "okay";
 };
+
+&ufs_mem_hc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p875>;
+	vdda-max-microamp = <90200>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	vdda-pll-max-microamp = <19000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 891d83b2afea..7050adba7995 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4,7 +4,9 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -304,6 +306,76 @@ uart2: serial@a90000 {
 			};
 		};
 
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8250-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: lanes@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+			};
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -314,8 +386,8 @@ intc: interrupt-controller@17a00000 {
 		};
 
 		pdc: interrupt-controller@b220000 {
-			compatible = "qcom,sm8250-pdc";
-			reg = <0x0b220000 0x30000>, <0x17c000f0 0x60>;
+			compatible = "qcom,sm8250-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
 			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
 					  <125 63 1>, <126 716 12>;
 			#interrupt-cells = <2>;
@@ -362,6 +434,56 @@ rpmhcc: clock-controller {
 				clock-names = "xo";
 				clocks = <&xo_board>;
 			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8250-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
 		};
 
 		tcsr_mutex_regs: syscon@1f40000 {
diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile
index 555638ada721..ef8d8fcbaa05 100644
--- a/arch/arm64/boot/dts/realtek/Makefile
+++ b/arch/arm64/boot/dts/realtek/Makefile
@@ -4,6 +4,12 @@ dtb-$(CONFIG_ARCH_REALTEK) += rtd1293-ds418j.dtb
 
 dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb
 dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-xnano-x5.dtb
 dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
 
 dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-bpi-m4.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-lionskin.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1619-mjolnir.dtb
diff --git a/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts
index b2dd583146b4..b2e44c6c2d22 100644
--- a/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts
+++ b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
 /*
- * Copyright (c) 2017 Andreas Färber
+ * Copyright (c) 2017-2019 Andreas Färber
  */
 
 /dts-v1/;
@@ -11,9 +11,9 @@ / {
 	compatible = "synology,ds418j", "realtek,rtd1293";
 	model = "Synology DiskStation DS418j";
 
-	memory@0 {
+	memory@1f000 {
 		device_type = "memory";
-		reg = <0x0 0x40000000>;
+		reg = <0x1f000 0x3ffe1000>; /* boot ROM to 1 GiB */
 	};
 
 	aliases {
diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi
index bd4e22723f7b..2d92b56ac94d 100644
--- a/arch/arm64/boot/dts/realtek/rtd1293.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi
@@ -36,16 +36,20 @@ l2: l2-cache {
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
 
 &arm_pmu {
 	interrupt-affinity = <&cpu0>, <&cpu1>;
 };
+
+&gic {
+	interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts b/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts
index bd584e99fff9..cf4a57c012a8 100644
--- a/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts
+++ b/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017 Andreas Färber
+ * Copyright (c) 2017-2019 Andreas Färber
  *
  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
@@ -12,9 +12,9 @@ / {
 	compatible = "mele,v9", "realtek,rtd1295";
 	model = "MeLE V9";
 
-	memory@0 {
+	memory@1f000 {
 		device_type = "memory";
-		reg = <0x0 0x80000000>;
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
 	};
 
 	aliases {
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts b/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts
index 8e2b0e75298a..14161c3f304d 100644
--- a/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts
+++ b/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017 Andreas Färber
+ * Copyright (c) 2017-2019 Andreas Färber
  *
  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
@@ -12,9 +12,9 @@ / {
 	compatible = "probox2,ava", "realtek,rtd1295";
 	model = "PROBOX2 AVA";
 
-	memory@0 {
+	memory@1f000 {
 		device_type = "memory";
-		reg = <0x0 0x80000000>;
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
 	};
 
 	aliases {
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts b/arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts
new file mode 100644
index 000000000000..d7878ff942e6
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1295.dtsi"
+
+/ {
+	compatible = "xnano,x5", "realtek,rtd1295";
+	model = "Xnano X5";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x3ffe1000>; /* boot ROM to 1 GiB or 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
index e98e508b9514..4beb37bb9522 100644
--- a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
+++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
@@ -11,9 +11,9 @@ / {
 	compatible = "zidoo,x9s", "realtek,rtd1295";
 	model = "Zidoo X9S";
 
-	memory@0 {
+	memory@1f000 {
 		device_type = "memory";
-		reg = <0x0 0x80000000>;
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
 	};
 
 	aliases {
diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
index 93f0e1d97721..1402abe80ea1 100644
--- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
@@ -2,7 +2,7 @@
 /*
  * Realtek RTD1295 SoC
  *
- * Copyright (c) 2016-2017 Andreas Färber
+ * Copyright (c) 2016-2019 Andreas Färber
  */
 
 #include "rtd129x.dtsi"
@@ -47,27 +47,16 @@ l2: l2-cache {
 		};
 	};
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		tee@10100000 {
-			reg = <0x10100000 0xf00000>;
-			no-map;
-		};
-	};
-
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts
index 5a051a52bf88..cc706d13da8b 100644
--- a/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts
+++ b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts
@@ -11,9 +11,9 @@ / {
 	compatible = "synology,ds418", "realtek,rtd1296";
 	model = "Synology DiskStation DS418";
 
-	memory@0 {
+	memory@1f000 {
 		device_type = "memory";
-		reg = <0x0 0x80000000>;
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
 	};
 
 	aliases {
diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
index 0f9e59cac086..fb864a139c97 100644
--- a/arch/arm64/boot/dts/realtek/rtd1296.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
@@ -50,13 +50,13 @@ l2: l2-cache {
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
index 4433114476f5..39aefe66a794 100644
--- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
@@ -2,14 +2,12 @@
 /*
  * Realtek RTD1293/RTD1295/RTD1296 SoC
  *
- * Copyright (c) 2016-2017 Andreas Färber
+ * Copyright (c) 2016-2019 Andreas Färber
  */
 
-/memreserve/	0x0000000000000000 0x0000000000030000;
-/memreserve/	0x000000000001f000 0x0000000000001000;
-/memreserve/	0x0000000000030000 0x00000000000d0000;
+/memreserve/	0x0000000000000000 0x000000000001f000;
+/memreserve/	0x000000000001f000 0x00000000000e1000;
 /memreserve/	0x0000000001b00000 0x00000000004be000;
-/memreserve/	0x0000000001ffe000 0x0000000000004000;
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/realtek,rtd1295.h>
@@ -19,6 +17,25 @@ / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@1f000 {
+			reg = <0x1f000 0x1000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x1ffe000 0x4000>;
+		};
+
+		tee: tee@10100000 {
+			reg = <0x10100000 0xf00000>;
+			no-map;
+		};
+	};
+
 	arm_pmu: arm-pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -35,73 +52,61 @@ soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		/* Exclude up to 2 GiB of RAM */
-		ranges = <0x80000000 0x80000000 0x80000000>;
-
-		reset1: reset-controller@98000000 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98000000 0x4>;
-			#reset-cells = <1>;
-		};
-
-		reset2: reset-controller@98000004 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98000004 0x4>;
-			#reset-cells = <1>;
-		};
-
-		reset3: reset-controller@98000008 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98000008 0x4>;
-			#reset-cells = <1>;
-		};
-
-		reset4: reset-controller@98000050 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98000050 0x4>;
-			#reset-cells = <1>;
-		};
-
-		iso_reset: reset-controller@98007088 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98007088 0x4>;
-			#reset-cells = <1>;
-		};
-
-		wdt: watchdog@98007680 {
-			compatible = "realtek,rtd1295-watchdog";
-			reg = <0x98007680 0x100>;
-			clocks = <&osc27M>;
-		};
-
-		uart0: serial@98007800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x98007800 0x400>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <27000000>;
-			resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
-			status = "disabled";
-		};
-
-		uart1: serial@9801b200 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x9801b200 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <432000000>;
-			resets = <&reset2 RTD1295_RSTN_UR1>;
-			status = "disabled";
-		};
-
-		uart2: serial@9801b400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x9801b400 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <432000000>;
-			resets = <&reset2 RTD1295_RSTN_UR2>;
-			status = "disabled";
+		ranges = <0x00000000 0x00000000 0x0001f000>, /* boot ROM */
+			 /* Exclude up to 2 GiB of RAM */
+			 <0x80000000 0x80000000 0x80000000>;
+
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1800>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1800>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x2000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x2000>;
+			};
 		};
 
 		gic: interrupt-controller@ff011000 {
@@ -116,3 +121,75 @@ gic: interrupt-controller@ff011000 {
 		};
 	};
 };
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset4: reset-controller@50 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x50 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <27000000>;
+		resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR1>;
+		status = "disabled";
+	};
+
+	uart2: serial@400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x400 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts b/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
new file mode 100644
index 000000000000..9891967d1315
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1395.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m4", "realtek,rtd1395";
+	model = "Banana Pi BPI-M4";
+
+	memory@2f000 {
+		device_type = "memory";
+		reg = <0x2f000 0x3ffd1000>; /* boot ROM to 1 GiB or 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts b/arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts
new file mode 100644
index 000000000000..83f9b536cdea
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1395.dtsi"
+
+/ {
+	compatible = "realtek,lion-skin", "realtek,rtd1395";
+	model = "Realtek Lion Skin EVB";
+
+	memory@2f000 {
+		device_type = "memory";
+		reg = <0x2f000 0x3ffd1000>; /* boot ROM to 1 GiB or 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* debug console (J1) */
+&uart0 {
+	status = "okay";
+};
+
+/* M.2 slot (CON1) */
+&uart1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395.dtsi b/arch/arm64/boot/dts/realtek/rtd1395.dtsi
new file mode 100644
index 000000000000..05c9216a87ee
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1395 SoC
+ *
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+#include "rtd139x.dtsi"
+
+/ {
+	compatible = "realtek,rtd1395";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&arm_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
new file mode 100644
index 000000000000..a3c10ceeb586
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1395 SoC family
+ *
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/memreserve/	0x0000000000000000 0x000000000002f000;
+/memreserve/	0x000000000002f000 0x00000000000d1000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1295.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@2f000 {
+			reg = <0x2f000 0x1000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x1ffe000 0x4000>;
+		};
+
+		tee: tee@10100000 {
+			reg = <0x10100000 0xf00000>;
+			no-map;
+		};
+	};
+
+	arm_pmu: arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0001f000>, /* boot ROM */
+			 <0x98000000 0x98000000 0x68000000>;
+
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x2000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x2000>;
+			};
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,gic-400";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset4: reset-controller@50 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x50 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <27000000>;
+		resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR1>;
+		status = "disabled";
+	};
+
+	uart2: serial@400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x400 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
new file mode 100644
index 000000000000..90ed6681468f
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1619.dtsi"
+
+/ {
+	compatible = "realtek,mjolnir", "realtek,rtd1619";
+	model = "Realtek Mjolnir EVB";
+
+	memory@2e000 {
+		device_type = "memory";
+		reg = <0x2e000 0x7ffd2000>; /* boot ROM to 2 GiB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+};
+
+/* debug console (J1) */
+&uart0 {
+	status = "okay";
+};
+
+/* M.2 slot (CON4) */
+&uart1 {
+	status = "disabled";
+};
+
+/* GPIO connector (T1) */
+&uart2 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1619.dtsi b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
new file mode 100644
index 000000000000..e52bf708b04e
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1619 SoC
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+#include "rtd16xx.dtsi"
+
+/ {
+	compatible = "realtek,rtd1619";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
new file mode 100644
index 000000000000..afba5f04c8ec
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD16xx SoC family
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@2f000 {
+			reg = <0x2f000 0x1000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x1ffe000 0x4000>;
+		};
+
+		tee: tee@10100000 {
+			reg = <0x10100000 0xf00000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			next-level-cache = <&l3>;
+
+		};
+
+		l3: l3-cache {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	arm_pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>,
+			<&cpu3>, <&cpu4>, <&cpu5>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "osc27M";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0002e000>, /* boot ROM */
+			 <0x98000000 0x98000000 0x68000000>;
+
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x1000>;
+			};
+		};
+
+		gic: interrupt-controller@ff100000 {
+			compatible = "arm,gic-v3";
+			reg = <0xff100000 0x10000>,
+			      <0xff140000 0xc0000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&iso {
+	uart0: serial0@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial1@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <432000000>;
+		status = "disabled";
+	};
+
+	uart2: serial2@400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x400 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <432000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 79023433a740..a603d947970e 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1000,7 +1000,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1008,7 +1008,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -1016,7 +1016,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -1024,7 +1024,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1033,7 +1033,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -1041,7 +1041,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 5>;
@@ -1049,7 +1049,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv1: mmu@fd950000 {
+		ipmmu_pv1: iommu@fd950000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xfd950000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -1057,7 +1057,7 @@ ipmmu_pv1: mmu@fd950000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -1065,7 +1065,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 3137f735974b..1e51855c7cd3 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -874,7 +874,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -882,7 +882,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -890,7 +890,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -898,7 +898,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -907,7 +907,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -915,7 +915,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -923,7 +923,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -931,7 +931,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -939,7 +939,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 22785cbddff5..5c72a7efbb03 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -847,7 +847,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -855,7 +855,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -863,7 +863,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -871,7 +871,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -880,7 +880,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -888,7 +888,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -896,7 +896,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -904,7 +904,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -912,7 +912,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
index 3975eecd50c4..d716c4386ae9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
@@ -77,7 +77,7 @@ &soc {
 	/delete-node/ dma-controller@e6460000;
 	/delete-node/ dma-controller@e6470000;
 
-	ipmmu_mp1: mmu@ec680000 {
+	ipmmu_mp1: iommu@ec680000 {
 		compatible = "renesas,ipmmu-r8a7795";
 		reg = <0 0xec680000 0 0x1000>;
 		renesas,ipmmu-main = <&ipmmu_mm 5>;
@@ -85,7 +85,7 @@ ipmmu_mp1: mmu@ec680000 {
 		#iommu-cells = <1>;
 	};
 
-	ipmmu_sy: mmu@e7730000 {
+	ipmmu_sy: iommu@e7730000 {
 		compatible = "renesas,ipmmu-r8a7795";
 		reg = <0 0xe7730000 0 0x1000>;
 		renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -93,11 +93,11 @@ ipmmu_sy: mmu@e7730000 {
 		#iommu-cells = <1>;
 	};
 
-	/delete-node/ mmu@fd950000;
-	/delete-node/ mmu@fd960000;
-	/delete-node/ mmu@fd970000;
-	/delete-node/ mmu@febe0000;
-	/delete-node/ mmu@fe980000;
+	/delete-node/ iommu@fd950000;
+	/delete-node/ iommu@fd960000;
+	/delete-node/ iommu@fd970000;
+	/delete-node/ iommu@febe0000;
+	/delete-node/ iommu@fe980000;
 
 	xhci1: usb@ee040000 {
 		compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 52229546454c..61d67d9714ab 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -1073,7 +1073,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1081,7 +1081,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -1089,7 +1089,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -1097,7 +1097,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ir: mmu@ff8b0000 {
+		ipmmu_ir: iommu@ff8b0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xff8b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1105,7 +1105,7 @@ ipmmu_ir: mmu@ff8b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1114,7 +1114,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp0: mmu@ec670000 {
+		ipmmu_mp0: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -1122,7 +1122,7 @@ ipmmu_mp0: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -1130,7 +1130,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv1: mmu@fd950000 {
+		ipmmu_pv1: iommu@fd950000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfd950000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 7>;
@@ -1138,7 +1138,7 @@ ipmmu_pv1: mmu@fd950000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv2: mmu@fd960000 {
+		ipmmu_pv2: iommu@fd960000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfd960000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -1146,7 +1146,7 @@ ipmmu_pv2: mmu@fd960000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv3: mmu@fd970000 {
+		ipmmu_pv3: iommu@fd970000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfd970000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
@@ -1154,7 +1154,7 @@ ipmmu_pv3: mmu@fd970000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -1162,7 +1162,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -1170,7 +1170,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc1: mmu@fe6f0000 {
+		ipmmu_vc1: iommu@fe6f0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfe6f0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 13>;
@@ -1178,7 +1178,7 @@ ipmmu_vc1: mmu@fe6f0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -1186,7 +1186,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi1: mmu@febe0000 {
+		ipmmu_vi1: iommu@febe0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfebe0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 15>;
@@ -1194,7 +1194,7 @@ ipmmu_vi1: mmu@febe0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
@@ -1202,7 +1202,7 @@ ipmmu_vp0: mmu@fe990000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp1: mmu@fe980000 {
+		ipmmu_vp1: iommu@fe980000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfe980000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 17>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 31282367d3ac..33bf62acffbb 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -997,7 +997,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1005,7 +1005,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -1013,7 +1013,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -1021,7 +1021,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ir: mmu@ff8b0000 {
+		ipmmu_ir: iommu@ff8b0000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xff8b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1029,7 +1029,7 @@ ipmmu_ir: mmu@ff8b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1038,7 +1038,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -1046,7 +1046,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 5>;
@@ -1054,7 +1054,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv1: mmu@fd950000 {
+		ipmmu_pv1: iommu@fd950000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xfd950000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -1062,7 +1062,7 @@ ipmmu_pv1: mmu@fd950000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 7>;
@@ -1070,7 +1070,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -1078,7 +1078,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 0d96f2d3492b..760e738b75b3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -626,21 +626,150 @@ i2c_dvfs: i2c@e60b0000 {
 			status = "disabled";
 		};
 
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
 
 		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
 			reg = <0 0xe6550000 0 0x60>;
-			/* placeholder */
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
 		};
 
 		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77961",
+				     "renesas,rcar-gen3-usbhs";
 			reg = <0 0xe6590000 0 0x200>;
-			/* placeholder */
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77961-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77961-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
 		};
 
 		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a77961-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
 			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
 			#phy-cells = <0>;
-			/* placeholder */
+			status = "disabled";
 		};
 
 		arm_cc630p: crypto@e6601000 {
@@ -799,15 +928,108 @@ avb: ethernet@e6800000 {
 			status = "disabled";
 		};
 
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
 			reg = <0 0xe6e31000 0 8>;
 			#pwm-cells = <2>;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
 		};
 
 		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
 			reg = <0 0xe6e68000 0 64>;
-			/* placeholder */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
 		};
 
 		scif2: serial@e6e88000 {
@@ -819,11 +1041,63 @@ scif2: serial@e6e88000 {
 				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
 		};
 
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
 		vin0: video@e6ef0000 {
 			reg = <0 0xe6ef0000 0 0x1000>;
 			/* placeholder */
@@ -889,43 +1163,98 @@ rcar_sound,ssi {
 		};
 
 		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77961",
+				     "renesas,rcar-gen3-xhci";
 			reg = <0 0xee000000 0 0xc00>;
-			/* placeholder */
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
 		};
 
 		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a77961-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
 			reg = <0 0xee020000 0 0x400>;
-			/* placeholder */
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
 		};
 
 		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
 			reg = <0 0xee080000 0 0x100>;
-			/* placeholder */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
 		};
 
 		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
 			reg = <0 0xee0a0000 0 0x100>;
-			/* placeholder */
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
 		};
 
 		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
 			reg = <0 0xee080100 0 0x100>;
-			/* placeholder */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
 		};
 
 		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
 			reg = <0 0xee0a0100 0 0x100>;
-			/* placeholder */
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
 		};
 
 		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77961",
+				     "renesas,rcar-gen3-usb2-phy";
 			reg = <0 0xee080200 0 0x700>;
-			/* placeholder */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
 		};
 
 		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a77961",
+				     "renesas,rcar-gen3-usb2-phy";
 			reg = <0 0xee0a0200 0 0x700>;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
 		};
 
 		sdhi0: sd@ee100000 {
@@ -994,13 +1323,57 @@ gic: interrupt-controller@f1010000 {
 		};
 
 		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77961",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xfe000000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
 		};
 
 		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a77961",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xee800000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
 		};
 
 		csi20: csi2@fea80000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index d82dd4e67b62..6f7ab39fd282 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -867,7 +867,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -875,7 +875,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -883,7 +883,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -891,7 +891,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -900,7 +900,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -908,7 +908,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -916,7 +916,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -924,7 +924,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -932,7 +932,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -940,7 +940,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index a009c0ebc8b4..bd95ecb1b40d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -985,7 +985,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -993,7 +993,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ir: mmu@ff8b0000 {
+		ipmmu_ir: iommu@ff8b0000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xff8b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1001,7 +1001,7 @@ ipmmu_ir: mmu@ff8b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1010,7 +1010,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 7>;
@@ -1018,7 +1018,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index e01b0508a18f..387e6d99f2f3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1266,7 +1266,7 @@ gether: ethernet@e7400000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1274,7 +1274,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ir: mmu@ff8b0000 {
+		ipmmu_ir: iommu@ff8b0000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xff8b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1282,7 +1282,7 @@ ipmmu_ir: mmu@ff8b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1291,7 +1291,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -1299,7 +1299,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe990000 {
+		ipmmu_vc0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -1307,7 +1307,7 @@ ipmmu_vc0: mmu@fe990000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -1315,16 +1315,18 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vip0: mmu@e7b00000 {
+		ipmmu_vip0: iommu@e7b00000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7b00000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vip1: mmu@e7960000 {
+		ipmmu_vip1: iommu@e7960000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 11>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 1543f18e834f..cd11f24744d4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -817,7 +817,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -825,7 +825,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -833,7 +833,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -841,7 +841,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -850,7 +850,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -858,7 +858,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -866,7 +866,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -874,7 +874,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -882,7 +882,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -890,7 +890,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index e8d2290fe79d..e5617ec0f49c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -507,7 +507,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -515,7 +515,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -523,7 +523,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -531,7 +531,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -540,7 +540,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -548,7 +548,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -556,7 +556,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -564,7 +564,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -572,7 +572,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -580,7 +580,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index ae7621309e92..b87b1f773083 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index f809dd6d5dc3..adc9b8bf5eaa 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -143,7 +143,7 @@ opp-1296000000 {
 	};
 
 	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index aa256350b18f..8011e9b12347 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -123,7 +123,6 @@ &cpu0 {
 };
 
 &emmc {
-	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
 	mmc-hs200-1_8v;
@@ -171,7 +170,6 @@ &pwm0 {
 };
 
 &sdmmc {
-	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	card-detect-delay = <300>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index ac43bc3f7031..ac7f694079d0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -127,7 +127,7 @@ opp-1008000000 {
 	};
 
 	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
new file mode 100644
index 000000000000..cf20aac5f2fe
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	model = "ODROID-GO Advance";
+	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		/*
+		 *      *** ODROIDGO2-Advance Switch layout ***
+		 * |------------------------------------------------|
+		 * | sw15                                      sw16 |
+		 * |------------------------------------------------|
+		 * |     sw1      |-------------------|      sw8    |
+		 * |  sw3   sw4   |                   |   sw7   sw5 |
+		 * |     sw2      |    LCD Display    |      sw6    |
+		 * |              |                   |             |
+		 * |              |-------------------|             |
+		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
+		 * |------------------------------------------------|
+		 */
+
+		sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "led_pins";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vccsys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "elida,kd35t133";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_cam: LDO_REG9 {
+				regulator-name = "vcc_cam";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		led_pins: led-pins {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326.dtsi b/arch/arm64/boot/dts/rockchip/rk3326.dtsi
new file mode 100644
index 000000000000..2ba6da125137
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include "px30.dtsi"
+
+&display_subsystem {
+	ports = <&vopb_out>;
+};
+
+/delete-node/ &dsi_in_vopl;
+/delete-node/ &lvds_vopl_in;
+/delete-node/ &vopl;
+/delete-node/ &vopl_mmu;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 49c4b96da3d4..ac29c2744d08 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -82,17 +82,16 @@ &emmc {
 &gmac2phy {
 	phy-supply = <&vcc_phy>;
 	clock_in_out = "output";
-	assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
 	assigned-clock-rate = <50000000>;
 	assigned-clocks = <&cru SCLK_MAC2PHY>;
 	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
-
+	status = "okay";
 };
 
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index bf3e546f5266..ebf3eb222e1f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -170,7 +170,7 @@ &hdmiphy {
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 7e88d88aab98..a4d591d91533 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -299,8 +299,6 @@ &pdmm0_sdi2_sleep
 	grf: syscon@ff100000 {
 		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff100000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		io_domains: io-domains {
 			compatible = "rockchip,rk3328-io-voltage-domain";
@@ -1794,10 +1792,6 @@ rmiim1_pins: rmiim1-pins {
 		};
 
 		gmac2phy {
-			fephyled_speed100: fephyled-speed100 {
-				rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>;
-			};
-
 			fephyled_speed10: fephyled-speed10 {
 				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
 			};
@@ -1806,18 +1800,6 @@ fephyled_duplex: fephyled-duplex {
 				rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
 			};
 
-			fephyled_rxm0: fephyled-rxm0 {
-				rockchip,pins = <0 RK_PD5 1 &pcfg_pull_none>;
-			};
-
-			fephyled_txm0: fephyled-txm0 {
-				rockchip,pins = <0 RK_PD5 2 &pcfg_pull_none>;
-			};
-
-			fephyled_linkm0: fephyled-linkm0 {
-				rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>;
-			};
-
 			fephyled_rxm1: fephyled-rxm1 {
 				rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
 			};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index aee484a05181..4b4a38e59283 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -633,7 +633,6 @@ brcmf: wifi@1 {
 &spdif {
 	status = "okay";
 	pinctrl-0 = <&spdif_bus_1>;
-	#sound-dai-cells = <0>;
 };
 
 &spi1 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 5ea281b55fe2..d44c73521218 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -147,7 +147,7 @@ es8316-sound {
 			"Speaker", "Speaker Amplifier OUTL",
 			"Speaker", "Speaker Amplifier OUTR";
 
-		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
 		simple-audio-card,aux-devs = <&speaker_amp>;
 		simple-audio-card,pin-switches = "Speaker";
 
@@ -690,7 +690,8 @@ &i2c4 {
 	fusb0: fusb30x@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
-		fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fusb0_int_gpio>;
 		vbus-supply = <&vbus_typec>;
@@ -743,7 +744,6 @@ usbc_dp: endpoint {
 };
 
 &i2s1 {
-	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
 	rockchip,capture-channels = <8>;
@@ -788,13 +788,13 @@ lidbtn_gpio: lidbtn-gpio {
 
 	dc-charger {
 		dc_det_gpio: dc-det-gpio {
-			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	es8316 {
 		hp_det_gpio: hp-det-gpio {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 9bca25801260..6788ab28f89a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -96,6 +96,24 @@ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		vin-supply = <&vcc_1v8>;
 	};
 
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -603,6 +621,13 @@ vsel2_gpio: vsel2-gpio {
 		};
 	};
 
+	sdcard {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
 	sdio-pwrseq {
 		wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -661,6 +686,8 @@ &sdmmc {
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 74f2c3d49095..1448f358ed0a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -403,7 +403,7 @@ usbdrd3_0: usb@fe800000 {
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_0: dwc3 {
+		usbdrd_dwc3_0: usb@fe800000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -439,7 +439,7 @@ usbdrd3_1: usb@fe900000 {
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_1: dwc3 {
+		usbdrd_dwc3_1: usb@fe900000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1124,8 +1124,6 @@ pd_vopl@RK3399_PD_VOPL {
 	pmugrf: syscon@ff320000 {
 		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff320000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		pmu_io_domains: io-domains {
 			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
@@ -1883,10 +1881,10 @@ edp_in_vopl: endpoint@1 {
 	gpu: gpu@ff9a0000 {
 		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
 		reg = <0x0 0xff9a0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "gpu", "job", "mmu";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		#cooling-cells = <2>;
 		power-domains = <&power RK3399_PD_GPU>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 24e534d85045..fad0d2b314bd 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -84,6 +84,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ACPI_CPPC_CPUFREQ=m
+CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m
 CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
 CONFIG_ARM_SCPI_CPUFREQ=y
 CONFIG_ARM_IMX_CPUFREQ_DT=m
@@ -208,7 +209,7 @@ CONFIG_PCIE_QCOM=y
 CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCIE_KIRIN=y
 CONFIG_PCIE_HISI_STB=y
-CONFIG_PCIE_TEGRA194=m
+CONFIG_PCIE_TEGRA194_HOST=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER_USER_HELPER=y
@@ -410,6 +411,7 @@ CONFIG_I2C_MESON=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_OWL=y
 CONFIG_I2C_PXA=y
+CONFIG_I2C_QCOM_CCI=m
 CONFIG_I2C_QCOM_GENI=m
 CONFIG_I2C_QUP=y
 CONFIG_I2C_RK3X=y
@@ -450,6 +452,7 @@ CONFIG_PINCTRL_IMX8MN=y
 CONFIG_PINCTRL_IMX8MP=y
 CONFIG_PINCTRL_IMX8MQ=y
 CONFIG_PINCTRL_IMX8QXP=y
+CONFIG_PINCTRL_IMX8DXL=y
 CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ6018=y
 CONFIG_PINCTRL_MSM8916=y
@@ -583,6 +586,7 @@ CONFIG_VIDEO_RENESAS_FCP=m
 CONFIG_VIDEO_RENESAS_VSP1=m
 CONFIG_SDR_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_RCAR_DRIF=m
+CONFIG_VIDEO_QCOM_CAMSS=m
 CONFIG_DRM=m
 CONFIG_DRM_I2C_NXP_TDA998X=m
 CONFIG_DRM_MALI_DISPLAY=m
@@ -802,6 +806,7 @@ CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_MMCC_8996=y
 CONFIG_MSM_GCC_8998=y
 CONFIG_QCS_GCC_404=y
+CONFIG_SDM_CAMCC_845=m
 CONFIG_SDM_GCC_845=y
 CONFIG_SDM_GPUCC_845=y
 CONFIG_SDM_DISPCC_845=y
diff --git a/arch/arm64/crypto/crct10dif-ce-core.S b/arch/arm64/crypto/crct10dif-ce-core.S
index 5a95c2628fbf..111d9c9abddd 100644
--- a/arch/arm64/crypto/crct10dif-ce-core.S
+++ b/arch/arm64/crypto/crct10dif-ce-core.S
@@ -66,7 +66,7 @@
 #include <asm/assembler.h>
 
 	.text
-	.cpu		generic+crypto
+	.arch		armv8-a+crypto
 
 	init_crc	.req	w19
 	buf		.req	x20
diff --git a/arch/arm64/include/asm/asm_pointer_auth.h b/arch/arm64/include/asm/asm_pointer_auth.h
index ce2a8486992b..52dead2a8640 100644
--- a/arch/arm64/include/asm/asm_pointer_auth.h
+++ b/arch/arm64/include/asm/asm_pointer_auth.h
@@ -39,25 +39,58 @@ alternative_if ARM64_HAS_GENERIC_AUTH
 alternative_else_nop_endif
 	.endm
 
-	.macro ptrauth_keys_install_kernel tsk, sync, tmp1, tmp2, tmp3
-alternative_if ARM64_HAS_ADDRESS_AUTH
+	.macro __ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
 	mov	\tmp1, #THREAD_KEYS_KERNEL
 	add	\tmp1, \tsk, \tmp1
 	ldp	\tmp2, \tmp3, [\tmp1, #PTRAUTH_KERNEL_KEY_APIA]
 	msr_s	SYS_APIAKEYLO_EL1, \tmp2
 	msr_s	SYS_APIAKEYHI_EL1, \tmp3
-	.if     \sync == 1
+	.endm
+
+	.macro ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
+alternative_else_nop_endif
+	.endm
+
+	.macro ptrauth_keys_install_kernel tsk, tmp1, tmp2, tmp3
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
 	isb
-	.endif
 alternative_else_nop_endif
 	.endm
 
+	.macro __ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
+	mrs	\tmp1, id_aa64isar1_el1
+	ubfx	\tmp1, \tmp1, #ID_AA64ISAR1_APA_SHIFT, #8
+	cbz	\tmp1, .Lno_addr_auth\@
+	mov_q	\tmp1, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \
+			SCTLR_ELx_ENDA | SCTLR_ELx_ENDB)
+	mrs	\tmp2, sctlr_el1
+	orr	\tmp2, \tmp2, \tmp1
+	msr	sctlr_el1, \tmp2
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
+	isb
+.Lno_addr_auth\@:
+	.endm
+
+	.macro ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
+alternative_if_not ARM64_HAS_ADDRESS_AUTH
+	b	.Lno_addr_auth\@
+alternative_else_nop_endif
+	__ptrauth_keys_init_cpu \tsk, \tmp1, \tmp2, \tmp3
+.Lno_addr_auth\@:
+	.endm
+
 #else /* CONFIG_ARM64_PTR_AUTH */
 
 	.macro ptrauth_keys_install_user tsk, tmp1, tmp2, tmp3
 	.endm
 
-	.macro ptrauth_keys_install_kernel tsk, sync, tmp1, tmp2, tmp3
+	.macro ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
+	.endm
+
+	.macro ptrauth_keys_install_kernel tsk, tmp1, tmp2, tmp3
 	.endm
 
 #endif /* CONFIG_ARM64_PTR_AUTH */
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
index 8eb5a088ae65..eacd0c74dfc7 100644
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -61,7 +61,9 @@
 #define ARM64_HAS_AMU_EXTN			51
 #define ARM64_HAS_ADDRESS_AUTH			52
 #define ARM64_HAS_GENERIC_AUTH			53
+#define ARM64_HAS_32BIT_EL1			54
+#define ARM64_BTI				55
 
-#define ARM64_NCAPS				54
+#define ARM64_NCAPS				56
 
 #endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index afe08251ff95..2f55da2bff4e 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -551,6 +551,13 @@ static inline bool id_aa64mmfr0_mixed_endian_el0(u64 mmfr0)
 		cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_BIGENDEL0_SHIFT) == 0x1;
 }
 
+static inline bool id_aa64pfr0_32bit_el1(u64 pfr0)
+{
+	u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_SHIFT);
+
+	return val == ID_AA64PFR0_EL1_32BIT_64BIT;
+}
+
 static inline bool id_aa64pfr0_32bit_el0(u64 pfr0)
 {
 	u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL0_SHIFT);
@@ -680,6 +687,12 @@ static inline bool system_has_prio_mask_debugging(void)
 	       system_uses_irq_prio_masking();
 }
 
+static inline bool system_supports_bti(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_BTI) &&
+		cpus_have_const_cap(ARM64_BTI);
+}
+
 #define ARM64_BP_HARDEN_UNKNOWN		-1
 #define ARM64_BP_HARDEN_WA_NEEDED	0
 #define ARM64_BP_HARDEN_NOT_REQUIRED	1
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index 45e821222774..d4ab3f73e7a3 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -86,14 +86,6 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base,
 	return (image_addr & ~(SZ_1G - 1UL)) + (1UL << (VA_BITS_MIN - 1));
 }
 
-#define efi_bs_call(func, ...)	efi_system_table()->boottime->func(__VA_ARGS__)
-#define efi_rt_call(func, ...)	efi_system_table()->runtime->func(__VA_ARGS__)
-#define efi_is_native()		(true)
-
-#define efi_table_attr(inst, attr)	(inst->attr)
-
-#define efi_call_proto(inst, func, ...) inst->func(inst, ##__VA_ARGS__)
-
 #define alloc_screen_info(x...)		&screen_info
 
 static inline void free_screen_info(struct screen_info *si)
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index b618017205a3..8d1c8dcb87fd 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -96,7 +96,28 @@
  */
 #define elf_check_arch(x)		((x)->e_machine == EM_AARCH64)
 
-#define elf_read_implies_exec(ex,stk)	(stk != EXSTACK_DISABLE_X)
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ *
+ * The decision process for determining the results are:
+ *
+ *                CPU*: | arm32      | arm64      |
+ * ELF:                 |            |            |
+ * ---------------------|------------|------------|
+ * missing PT_GNU_STACK | exec-all   | exec-none  |
+ * PT_GNU_STACK == RWX  | exec-stack | exec-stack |
+ * PT_GNU_STACK == RW   | exec-none  | exec-none  |
+ *
+ *  exec-all  : all PROT_READ user mappings are executable, except when
+ *              backed by files on a noexec-filesystem.
+ *  exec-none : only PROT_EXEC user mappings are executable.
+ *  exec-stack: only the stack and PROT_EXEC user mappings are executable.
+ *
+ *  *all arm64 CPUs support NX, so there is no "lacks NX" column.
+ *
+ */
+#define compat_elf_read_implies_exec(ex, stk)	(stk == EXSTACK_DEFAULT)
 
 #define CORE_DUMP_USE_REGSET
 #define ELF_EXEC_PAGESIZE	PAGE_SIZE
@@ -114,7 +135,11 @@
 
 #ifndef __ASSEMBLY__
 
+#include <uapi/linux/elf.h>
 #include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/types.h>
 #include <asm/processor.h> /* for signal_minsigstksz, used by ARCH_DLINFO */
 
 typedef unsigned long elf_greg_t;
@@ -224,6 +249,52 @@ extern int aarch32_setup_additional_pages(struct linux_binprm *bprm,
 
 #endif /* CONFIG_COMPAT */
 
+struct arch_elf_state {
+	int flags;
+};
+
+#define ARM64_ELF_BTI		(1 << 0)
+
+#define INIT_ARCH_ELF_STATE {			\
+	.flags = 0,				\
+}
+
+static inline int arch_parse_elf_property(u32 type, const void *data,
+					  size_t datasz, bool compat,
+					  struct arch_elf_state *arch)
+{
+	/* No known properties for AArch32 yet */
+	if (IS_ENABLED(CONFIG_COMPAT) && compat)
+		return 0;
+
+	if (type == GNU_PROPERTY_AARCH64_FEATURE_1_AND) {
+		const u32 *p = data;
+
+		if (datasz != sizeof(*p))
+			return -ENOEXEC;
+
+		if (system_supports_bti() &&
+		    (*p & GNU_PROPERTY_AARCH64_FEATURE_1_BTI))
+			arch->flags |= ARM64_ELF_BTI;
+	}
+
+	return 0;
+}
+
+static inline int arch_elf_pt_proc(void *ehdr, void *phdr,
+				   struct file *f, bool is_interp,
+				   struct arch_elf_state *state)
+{
+	return 0;
+}
+
+static inline int arch_check_elf(void *ehdr, bool has_interp,
+				 void *interp_ehdr,
+				 struct arch_elf_state *state)
+{
+	return 0;
+}
+
 #endif /* !__ASSEMBLY__ */
 
 #endif
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index 6a395a7e6707..035003acfa87 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -22,7 +22,7 @@
 #define ESR_ELx_EC_PAC		(0x09)	/* EL2 and above */
 /* Unallocated EC: 0x0A - 0x0B */
 #define ESR_ELx_EC_CP14_64	(0x0C)
-/* Unallocated EC: 0x0d */
+#define ESR_ELx_EC_BTI		(0x0D)
 #define ESR_ELx_EC_ILL		(0x0E)
 /* Unallocated EC: 0x0F - 0x10 */
 #define ESR_ELx_EC_SVC32	(0x11)
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index 7a6e81ca23a8..7577a754d443 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -34,6 +34,7 @@ static inline u32 disr_to_esr(u64 disr)
 asmlinkage void enter_from_user_mode(void);
 void do_mem_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs);
 void do_undefinstr(struct pt_regs *regs);
+void do_bti(struct pt_regs *regs);
 asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr);
 void do_debug_exception(unsigned long addr_if_watchpoint, unsigned int esr,
 			struct pt_regs *regs);
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index 0f00265248b5..d683bcbf1e7c 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -94,6 +94,7 @@
 #define KERNEL_HWCAP_BF16		__khwcap2_feature(BF16)
 #define KERNEL_HWCAP_DGH		__khwcap2_feature(DGH)
 #define KERNEL_HWCAP_RNG		__khwcap2_feature(RNG)
+#define KERNEL_HWCAP_BTI		__khwcap2_feature(BTI)
 
 /*
  * This yields a mask that user programs can use to figure out what
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index a30b4eec7cb4..6ea53e6e8b26 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -507,10 +507,12 @@ static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu,
 
 static __always_inline void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr)
 {
-	if (vcpu_mode_is_32bit(vcpu))
+	if (vcpu_mode_is_32bit(vcpu)) {
 		kvm_skip_instr32(vcpu, is_wide_instr);
-	else
+	} else {
 		*vcpu_pc(vcpu) += 4;
+		*vcpu_cpsr(vcpu) &= ~PSR_BTYPE_MASK;
+	}
 
 	/* advance the singlestep state machine */
 	*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index 30b0e8d6b895..8255fab2e441 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -172,8 +172,8 @@ void kvm_clear_hyp_idmap(void);
 	__pmd(__phys_to_pmd_val(__pa(ptep)) | PMD_TYPE_TABLE)
 #define kvm_mk_pud(pmdp)					\
 	__pud(__phys_to_pud_val(__pa(pmdp)) | PMD_TYPE_TABLE)
-#define kvm_mk_pgd(pudp)					\
-	__pgd(__phys_to_pgd_val(__pa(pudp)) | PUD_TYPE_TABLE)
+#define kvm_mk_p4d(pmdp)					\
+	__p4d(__phys_to_p4d_val(__pa(pmdp)) | PUD_TYPE_TABLE)
 
 #define kvm_set_pud(pudp, pud)		set_pud(pudp, pud)
 
@@ -299,6 +299,12 @@ static inline bool kvm_s2pud_young(pud_t pud)
 #define hyp_pud_table_empty(pudp) kvm_page_empty(pudp)
 #endif
 
+#ifdef __PAGETABLE_P4D_FOLDED
+#define hyp_p4d_table_empty(p4dp) (0)
+#else
+#define hyp_p4d_table_empty(p4dp) kvm_page_empty(p4dp)
+#endif
+
 struct kvm;
 
 #define kvm_flush_dcache_to_poc(a,l)	__flush_dcache_area((a), (l))
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index a1871bb32bb1..2d43983289b9 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -156,6 +156,17 @@
 #define IOREMAP_MAX_ORDER	(PMD_SHIFT)
 #endif
 
+/*
+ * Memory hotplug allows new regions of 'System RAM' to be added to the system.
+ * These aren't described as memory by the UEFI memory map, or DT memory node.
+ * If we kexec from one of these regions, the new kernel boots from a location
+ * that isn't described as RAM.
+ *
+ * Give these resources a different name, so unaware kexec doesn't do this by
+ * accident.
+ */
+#define MEMORY_HOTPLUG_RES_NAME "System RAM (hotplug)"
+
 #ifndef __ASSEMBLY__
 extern u64			vabits_actual;
 #define PAGE_END		(_PAGE_END(vabits_actual))
diff --git a/arch/arm64/include/asm/mman.h b/arch/arm64/include/asm/mman.h
new file mode 100644
index 000000000000..081ec8de9ea6
--- /dev/null
+++ b/arch/arm64/include/asm/mman.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MMAN_H__
+#define __ASM_MMAN_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <uapi/asm/mman.h>
+
+static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot,
+	unsigned long pkey __always_unused)
+{
+	if (system_supports_bti() && (prot & PROT_BTI))
+		return VM_ARM64_BTI;
+
+	return 0;
+}
+#define arch_calc_vm_prot_bits(prot, pkey) arch_calc_vm_prot_bits(prot, pkey)
+
+static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
+{
+	return (vm_flags & VM_ARM64_BTI) ? __pgprot(PTE_GP) : __pgprot(0);
+}
+#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)
+
+static inline bool arch_validate_prot(unsigned long prot,
+	unsigned long addr __always_unused)
+{
+	unsigned long supported = PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM;
+
+	if (system_supports_bti())
+		supported |= PROT_BTI;
+
+	return (prot & ~supported) == 0;
+}
+#define arch_validate_prot(prot, addr) arch_validate_prot(prot, addr)
+
+#endif /* ! __ASM_MMAN_H__ */
diff --git a/arch/arm64/include/asm/pgalloc.h b/arch/arm64/include/asm/pgalloc.h
index 172d76fa0245..58e93583ddb6 100644
--- a/arch/arm64/include/asm/pgalloc.h
+++ b/arch/arm64/include/asm/pgalloc.h
@@ -73,17 +73,17 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pudp)
 	free_page((unsigned long)pudp);
 }
 
-static inline void __pgd_populate(pgd_t *pgdp, phys_addr_t pudp, pgdval_t prot)
+static inline void __p4d_populate(p4d_t *p4dp, phys_addr_t pudp, p4dval_t prot)
 {
-	set_pgd(pgdp, __pgd(__phys_to_pgd_val(pudp) | prot));
+	set_p4d(p4dp, __p4d(__phys_to_p4d_val(pudp) | prot));
 }
 
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgdp, pud_t *pudp)
+static inline void p4d_populate(struct mm_struct *mm, p4d_t *p4dp, pud_t *pudp)
 {
-	__pgd_populate(pgdp, __pa(pudp), PUD_TYPE_TABLE);
+	__p4d_populate(p4dp, __pa(pudp), PUD_TYPE_TABLE);
 }
 #else
-static inline void __pgd_populate(pgd_t *pgdp, phys_addr_t pudp, pgdval_t prot)
+static inline void __p4d_populate(p4d_t *p4dp, phys_addr_t pudp, p4dval_t prot)
 {
 	BUILD_BUG();
 }
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index 6bf5e650da78..9c91a8f93a0e 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -151,6 +151,7 @@
 #define PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
 #define PTE_AF			(_AT(pteval_t, 1) << 10)	/* Access Flag */
 #define PTE_NG			(_AT(pteval_t, 1) << 11)	/* nG */
+#define PTE_GP			(_AT(pteval_t, 1) << 50)	/* BTI guarded */
 #define PTE_DBM			(_AT(pteval_t, 1) << 51)	/* Dirty Bit Management */
 #define PTE_CONT		(_AT(pteval_t, 1) << 52)	/* Contiguous range */
 #define PTE_PXN			(_AT(pteval_t, 1) << 53)	/* Privileged XN */
@@ -190,7 +191,6 @@
  * Memory Attribute override for Stage-2 (MemAttr[3:0])
  */
 #define PTE_S2_MEMATTR(t)	(_AT(pteval_t, (t)) << 2)
-#define PTE_S2_MEMATTR_MASK	(_AT(pteval_t, 0xf) << 2)
 
 /*
  * EL2/HYP PTE/PMD definitions
diff --git a/arch/arm64/include/asm/pgtable-types.h b/arch/arm64/include/asm/pgtable-types.h
index acb0751a6606..b8f158ae2527 100644
--- a/arch/arm64/include/asm/pgtable-types.h
+++ b/arch/arm64/include/asm/pgtable-types.h
@@ -14,6 +14,7 @@
 typedef u64 pteval_t;
 typedef u64 pmdval_t;
 typedef u64 pudval_t;
+typedef u64 p4dval_t;
 typedef u64 pgdval_t;
 
 /*
@@ -44,13 +45,11 @@ typedef struct { pteval_t pgprot; } pgprot_t;
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
 #if CONFIG_PGTABLE_LEVELS == 2
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 #elif CONFIG_PGTABLE_LEVELS == 3
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopud.h>
 #elif CONFIG_PGTABLE_LEVELS == 4
-#include <asm-generic/5level-fixup.h>
+#include <asm-generic/pgtable-nop4d.h>
 #endif
 
 #endif	/* __ASM_PGTABLE_TYPES_H */
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 538c85e62f86..dec518531891 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -298,6 +298,11 @@ static inline pte_t pgd_pte(pgd_t pgd)
 	return __pte(pgd_val(pgd));
 }
 
+static inline pte_t p4d_pte(p4d_t p4d)
+{
+	return __pte(p4d_val(p4d));
+}
+
 static inline pte_t pud_pte(pud_t pud)
 {
 	return __pte(pud_val(pud));
@@ -366,7 +371,7 @@ static inline int pmd_protnone(pmd_t pmd)
 #define pmd_mkclean(pmd)	pte_pmd(pte_mkclean(pmd_pte(pmd)))
 #define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
 #define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
-#define pmd_mknotpresent(pmd)	(__pmd(pmd_val(pmd) & ~PMD_SECT_VALID))
+#define pmd_mkinvalid(pmd)	(__pmd(pmd_val(pmd) & ~PMD_SECT_VALID))
 
 #define pmd_thp_or_huge(pmd)	(pmd_huge(pmd) || pmd_trans_huge(pmd))
 
@@ -401,12 +406,18 @@ static inline pmd_t pmd_mkdevmap(pmd_t pmd)
 
 #define set_pmd_at(mm, addr, pmdp, pmd)	set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd))
 
+#define __p4d_to_phys(p4d)	__pte_to_phys(p4d_pte(p4d))
+#define __phys_to_p4d_val(phys)	__phys_to_pte_val(phys)
+
 #define __pgd_to_phys(pgd)	__pte_to_phys(pgd_pte(pgd))
 #define __phys_to_pgd_val(phys)	__phys_to_pte_val(phys)
 
 #define __pgprot_modify(prot,mask,bits) \
 	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
 
+#define pgprot_nx(prot) \
+	__pgprot_modify(prot, 0, PTE_PXN)
+
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */
@@ -457,6 +468,7 @@ extern pgd_t init_pg_dir[PTRS_PER_PGD];
 extern pgd_t init_pg_end[];
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
+extern pgd_t idmap_pg_end[];
 extern pgd_t tramp_pg_dir[PTRS_PER_PGD];
 
 extern void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd);
@@ -508,7 +520,7 @@ static inline void pte_unmap(pte_t *pte) { }
 #define pte_set_fixmap_offset(pmd, addr)	pte_set_fixmap(pte_offset_phys(pmd, addr))
 #define pte_clear_fixmap()		clear_fixmap(FIX_PTE)
 
-#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(__pmd_to_phys(pmd)))
+#define pmd_page(pmd)			phys_to_page(__pmd_to_phys(pmd))
 
 /* use ONLY for statically allocated translation tables */
 #define pte_offset_kimg(dir,addr)	((pte_t *)__phys_to_kimg(pte_offset_phys((dir), (addr))))
@@ -566,7 +578,7 @@ static inline phys_addr_t pud_page_paddr(pud_t pud)
 #define pmd_set_fixmap_offset(pud, addr)	pmd_set_fixmap(pmd_offset_phys(pud, addr))
 #define pmd_clear_fixmap()		clear_fixmap(FIX_PMD)
 
-#define pud_page(pud)		pfn_to_page(__phys_to_pfn(__pud_to_phys(pud)))
+#define pud_page(pud)			phys_to_page(__pud_to_phys(pud))
 
 /* use ONLY for statically allocated translation tables */
 #define pmd_offset_kimg(dir,addr)	((pmd_t *)__phys_to_kimg(pmd_offset_phys((dir), (addr))))
@@ -588,49 +600,50 @@ static inline phys_addr_t pud_page_paddr(pud_t pud)
 
 #define pud_ERROR(pud)		__pud_error(__FILE__, __LINE__, pud_val(pud))
 
-#define pgd_none(pgd)		(!pgd_val(pgd))
-#define pgd_bad(pgd)		(!(pgd_val(pgd) & 2))
-#define pgd_present(pgd)	(pgd_val(pgd))
+#define p4d_none(p4d)		(!p4d_val(p4d))
+#define p4d_bad(p4d)		(!(p4d_val(p4d) & 2))
+#define p4d_present(p4d)	(p4d_val(p4d))
 
-static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
+static inline void set_p4d(p4d_t *p4dp, p4d_t p4d)
 {
-	if (in_swapper_pgdir(pgdp)) {
-		set_swapper_pgd(pgdp, pgd);
+	if (in_swapper_pgdir(p4dp)) {
+		set_swapper_pgd((pgd_t *)p4dp, __pgd(p4d_val(p4d)));
 		return;
 	}
 
-	WRITE_ONCE(*pgdp, pgd);
+	WRITE_ONCE(*p4dp, p4d);
 	dsb(ishst);
 	isb();
 }
 
-static inline void pgd_clear(pgd_t *pgdp)
+static inline void p4d_clear(p4d_t *p4dp)
 {
-	set_pgd(pgdp, __pgd(0));
+	set_p4d(p4dp, __p4d(0));
 }
 
-static inline phys_addr_t pgd_page_paddr(pgd_t pgd)
+static inline phys_addr_t p4d_page_paddr(p4d_t p4d)
 {
-	return __pgd_to_phys(pgd);
+	return __p4d_to_phys(p4d);
 }
 
 /* Find an entry in the frst-level page table. */
 #define pud_index(addr)		(((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
 
-#define pud_offset_phys(dir, addr)	(pgd_page_paddr(READ_ONCE(*(dir))) + pud_index(addr) * sizeof(pud_t))
+#define pud_offset_phys(dir, addr)	(p4d_page_paddr(READ_ONCE(*(dir))) + pud_index(addr) * sizeof(pud_t))
 #define pud_offset(dir, addr)		((pud_t *)__va(pud_offset_phys((dir), (addr))))
 
 #define pud_set_fixmap(addr)		((pud_t *)set_fixmap_offset(FIX_PUD, addr))
-#define pud_set_fixmap_offset(pgd, addr)	pud_set_fixmap(pud_offset_phys(pgd, addr))
+#define pud_set_fixmap_offset(p4d, addr)	pud_set_fixmap(pud_offset_phys(p4d, addr))
 #define pud_clear_fixmap()		clear_fixmap(FIX_PUD)
 
-#define pgd_page(pgd)		pfn_to_page(__phys_to_pfn(__pgd_to_phys(pgd)))
+#define p4d_page(p4d)			phys_to_page(__p4d_to_phys(p4d))
 
 /* use ONLY for statically allocated translation tables */
 #define pud_offset_kimg(dir,addr)	((pud_t *)__phys_to_kimg(pud_offset_phys((dir), (addr))))
 
 #else
 
+#define p4d_page_paddr(p4d)	({ BUILD_BUG(); 0;})
 #define pgd_page_paddr(pgd)	({ BUILD_BUG(); 0;})
 
 /* Match pud_offset folding in <asm/generic/pgtable-nopud.h> */
@@ -660,7 +673,7 @@ static inline phys_addr_t pgd_page_paddr(pgd_t pgd)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
-			      PTE_PROT_NONE | PTE_VALID | PTE_WRITE;
+			      PTE_PROT_NONE | PTE_VALID | PTE_WRITE | PTE_GP;
 	/* preserve the hardware dirty information */
 	if (pte_hw_dirty(pte))
 		pte = pte_mkdirty(pte);
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index bf57308fcd63..2172ec7594ba 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -35,6 +35,7 @@
 #define GIC_PRIO_PSR_I_SET		(1 << 4)
 
 /* Additional SPSR bits not exposed in the UABI */
+
 #define PSR_IL_BIT		(1 << 20)
 
 /* AArch32-specific ptrace requests */
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index 40d5ba029615..ea268d88b6f7 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -23,14 +23,6 @@
 #define CPU_STUCK_REASON_52_BIT_VA	(UL(1) << CPU_STUCK_REASON_SHIFT)
 #define CPU_STUCK_REASON_NO_GRAN	(UL(2) << CPU_STUCK_REASON_SHIFT)
 
-/* Possible options for __cpu_setup */
-/* Option to setup primary cpu */
-#define ARM64_CPU_BOOT_PRIMARY		(1)
-/* Option to setup secondary cpus */
-#define ARM64_CPU_BOOT_SECONDARY	(2)
-/* Option to setup cpus for different cpu run time services */
-#define ARM64_CPU_RUNTIME		(3)
-
 #ifndef __ASSEMBLY__
 
 #include <asm/percpu.h>
@@ -96,9 +88,6 @@ asmlinkage void secondary_start_kernel(void);
 struct secondary_data {
 	void *stack;
 	struct task_struct *task;
-#ifdef CONFIG_ARM64_PTR_AUTH
-	struct ptrauth_keys_kernel ptrauth_key;
-#endif
 	long status;
 };
 
diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h
index 4d9b1f48dc39..fdb913cc0bcb 100644
--- a/arch/arm64/include/asm/stacktrace.h
+++ b/arch/arm64/include/asm/stacktrace.h
@@ -64,7 +64,8 @@ struct stackframe {
 extern int unwind_frame(struct task_struct *tsk, struct stackframe *frame);
 extern void walk_stackframe(struct task_struct *tsk, struct stackframe *frame,
 			    int (*fn)(struct stackframe *, void *), void *data);
-extern void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk);
+extern void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+			   const char *loglvl);
 
 DECLARE_PER_CPU(unsigned long *, irq_stack_ptr);
 
diff --git a/arch/arm64/include/asm/stage2_pgtable.h b/arch/arm64/include/asm/stage2_pgtable.h
index 326aac658b9d..9a364aeae5fb 100644
--- a/arch/arm64/include/asm/stage2_pgtable.h
+++ b/arch/arm64/include/asm/stage2_pgtable.h
@@ -68,41 +68,67 @@ static inline bool kvm_stage2_has_pud(struct kvm *kvm)
 #define S2_PUD_SIZE			(1UL << S2_PUD_SHIFT)
 #define S2_PUD_MASK			(~(S2_PUD_SIZE - 1))
 
-static inline bool stage2_pgd_none(struct kvm *kvm, pgd_t pgd)
+#define stage2_pgd_none(kvm, pgd)		pgd_none(pgd)
+#define stage2_pgd_clear(kvm, pgd)		pgd_clear(pgd)
+#define stage2_pgd_present(kvm, pgd)		pgd_present(pgd)
+#define stage2_pgd_populate(kvm, pgd, p4d)	pgd_populate(NULL, pgd, p4d)
+
+static inline p4d_t *stage2_p4d_offset(struct kvm *kvm,
+				       pgd_t *pgd, unsigned long address)
+{
+	return p4d_offset(pgd, address);
+}
+
+static inline void stage2_p4d_free(struct kvm *kvm, p4d_t *p4d)
+{
+}
+
+static inline bool stage2_p4d_table_empty(struct kvm *kvm, p4d_t *p4dp)
+{
+	return false;
+}
+
+static inline phys_addr_t stage2_p4d_addr_end(struct kvm *kvm,
+					      phys_addr_t addr, phys_addr_t end)
+{
+	return end;
+}
+
+static inline bool stage2_p4d_none(struct kvm *kvm, p4d_t p4d)
 {
 	if (kvm_stage2_has_pud(kvm))
-		return pgd_none(pgd);
+		return p4d_none(p4d);
 	else
 		return 0;
 }
 
-static inline void stage2_pgd_clear(struct kvm *kvm, pgd_t *pgdp)
+static inline void stage2_p4d_clear(struct kvm *kvm, p4d_t *p4dp)
 {
 	if (kvm_stage2_has_pud(kvm))
-		pgd_clear(pgdp);
+		p4d_clear(p4dp);
 }
 
-static inline bool stage2_pgd_present(struct kvm *kvm, pgd_t pgd)
+static inline bool stage2_p4d_present(struct kvm *kvm, p4d_t p4d)
 {
 	if (kvm_stage2_has_pud(kvm))
-		return pgd_present(pgd);
+		return p4d_present(p4d);
 	else
 		return 1;
 }
 
-static inline void stage2_pgd_populate(struct kvm *kvm, pgd_t *pgd, pud_t *pud)
+static inline void stage2_p4d_populate(struct kvm *kvm, p4d_t *p4d, pud_t *pud)
 {
 	if (kvm_stage2_has_pud(kvm))
-		pgd_populate(NULL, pgd, pud);
+		p4d_populate(NULL, p4d, pud);
 }
 
 static inline pud_t *stage2_pud_offset(struct kvm *kvm,
-				       pgd_t *pgd, unsigned long address)
+				       p4d_t *p4d, unsigned long address)
 {
 	if (kvm_stage2_has_pud(kvm))
-		return pud_offset(pgd, address);
+		return pud_offset(p4d, address);
 	else
-		return (pud_t *)pgd;
+		return (pud_t *)p4d;
 }
 
 static inline void stage2_pud_free(struct kvm *kvm, pud_t *pud)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index c4ac0ac25a00..48c35e75e994 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -552,6 +552,8 @@
 #endif
 
 /* SCTLR_EL1 specific flags. */
+#define SCTLR_EL1_BT1		(BIT(36))
+#define SCTLR_EL1_BT0		(BIT(35))
 #define SCTLR_EL1_UCI		(BIT(26))
 #define SCTLR_EL1_E0E		(BIT(24))
 #define SCTLR_EL1_SPAN		(BIT(23))
@@ -655,15 +657,18 @@
 #define ID_AA64PFR0_ASIMD_NI		0xf
 #define ID_AA64PFR0_ASIMD_SUPPORTED	0x0
 #define ID_AA64PFR0_EL1_64BIT_ONLY	0x1
+#define ID_AA64PFR0_EL1_32BIT_64BIT	0x2
 #define ID_AA64PFR0_EL0_64BIT_ONLY	0x1
 #define ID_AA64PFR0_EL0_32BIT_64BIT	0x2
 
 /* id_aa64pfr1 */
 #define ID_AA64PFR1_SSBS_SHIFT		4
+#define ID_AA64PFR1_BT_SHIFT		0
 
 #define ID_AA64PFR1_SSBS_PSTATE_NI	0
 #define ID_AA64PFR1_SSBS_PSTATE_ONLY	1
 #define ID_AA64PFR1_SSBS_PSTATE_INSNS	2
+#define ID_AA64PFR1_BT_BTI		0x1
 
 /* id_aa64zfr0 */
 #define ID_AA64ZFR0_F64MM_SHIFT		56
@@ -752,6 +757,15 @@
 
 #define ID_DFR0_PERFMON_8_1		0x4
 
+#define ID_ISAR4_SWP_FRAC_SHIFT		28
+#define ID_ISAR4_PSR_M_SHIFT		24
+#define ID_ISAR4_SYNCH_PRIM_FRAC_SHIFT	20
+#define ID_ISAR4_BARRIER_SHIFT		16
+#define ID_ISAR4_SMC_SHIFT		12
+#define ID_ISAR4_WRITEBACK_SHIFT	8
+#define ID_ISAR4_WITHSHIFTS_SHIFT	4
+#define ID_ISAR4_UNPRIV_SHIFT		0
+
 #define ID_ISAR5_RDM_SHIFT		24
 #define ID_ISAR5_CRC32_SHIFT		16
 #define ID_ISAR5_SHA2_SHIFT		12
@@ -785,17 +799,14 @@
 #define MVFR1_FPDNAN_SHIFT		4
 #define MVFR1_FPFTZ_SHIFT		0
 
-
-#define ID_AA64MMFR0_TGRAN4_SHIFT	28
-#define ID_AA64MMFR0_TGRAN64_SHIFT	24
-#define ID_AA64MMFR0_TGRAN16_SHIFT	20
-
-#define ID_AA64MMFR0_TGRAN4_NI		0xf
-#define ID_AA64MMFR0_TGRAN4_SUPPORTED	0x0
-#define ID_AA64MMFR0_TGRAN64_NI		0xf
-#define ID_AA64MMFR0_TGRAN64_SUPPORTED	0x0
-#define ID_AA64MMFR0_TGRAN16_NI		0x0
-#define ID_AA64MMFR0_TGRAN16_SUPPORTED	0x1
+#define ID_PFR1_GIC_SHIFT		28
+#define ID_PFR1_VIRT_FRAC_SHIFT		24
+#define ID_PFR1_SEC_FRAC_SHIFT		20
+#define ID_PFR1_GENTIMER_SHIFT		16
+#define ID_PFR1_VIRTUALIZATION_SHIFT	12
+#define ID_PFR1_MPROGMOD_SHIFT		8
+#define ID_PFR1_SECURITY_SHIFT		4
+#define ID_PFR1_PROGMOD_SHIFT		0
 
 #if defined(CONFIG_ARM64_4K_PAGES)
 #define ID_AA64MMFR0_TGRAN_SHIFT	ID_AA64MMFR0_TGRAN4_SHIFT
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index 803039d504de..3b859596840d 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -38,7 +38,7 @@
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE + 5)
 #define __ARM_NR_COMPAT_END		(__ARM_NR_COMPAT_BASE + 0x800)
 
-#define __NR_compat_syscalls		439
+#define __NR_compat_syscalls		440
 #endif
 
 #define __ARCH_WANT_SYS_CLONE
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index c1c61635f89c..4958633ea7c2 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -883,6 +883,8 @@ __SYSCALL(__NR_clone3, sys_clone3)
 __SYSCALL(__NR_openat2, sys_openat2)
 #define __NR_pidfd_getfd 438
 __SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd)
+#define __NR_process_madvise 439
+__SYSCALL(__NR_process_madvise, compat_sys_process_madvise)
 
 /*
  * Please add new compat syscalls above this comment and update
diff --git a/arch/arm64/include/asm/vmap_stack.h b/arch/arm64/include/asm/vmap_stack.h
index 0a12115d9638..0cc6636e3f15 100644
--- a/arch/arm64/include/asm/vmap_stack.h
+++ b/arch/arm64/include/asm/vmap_stack.h
@@ -19,10 +19,8 @@ static inline unsigned long *arch_alloc_vmap_stack(size_t stack_size, int node)
 {
 	BUILD_BUG_ON(!IS_ENABLED(CONFIG_VMAP_STACK));
 
-	return __vmalloc_node_range(stack_size, THREAD_ALIGN,
-				    VMALLOC_START, VMALLOC_END,
-				    THREADINFO_GFP, PAGE_KERNEL, 0, node,
-				    __builtin_return_address(0));
+	return __vmalloc_node(stack_size, THREAD_ALIGN, THREADINFO_GFP, node,
+			__builtin_return_address(0));
 }
 
 #endif /* __ASM_VMAP_STACK_H */
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index 7752d93bb50f..2d6ba1c2592e 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -73,5 +73,6 @@
 #define HWCAP2_BF16		(1 << 14)
 #define HWCAP2_DGH		(1 << 15)
 #define HWCAP2_RNG		(1 << 16)
+#define HWCAP2_BTI		(1 << 17)
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/include/uapi/asm/mman.h b/arch/arm64/include/uapi/asm/mman.h
new file mode 100644
index 000000000000..6fdd71eb644f
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/mman.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ASM_MMAN_H
+#define _UAPI__ASM_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define PROT_BTI	0x10		/* BTI guarded page */
+
+#endif /* ! _UAPI__ASM_MMAN_H */
diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
index d1bb5b69f1ce..42cbe34d95ce 100644
--- a/arch/arm64/include/uapi/asm/ptrace.h
+++ b/arch/arm64/include/uapi/asm/ptrace.h
@@ -46,6 +46,7 @@
 #define PSR_I_BIT	0x00000080
 #define PSR_A_BIT	0x00000100
 #define PSR_D_BIT	0x00000200
+#define PSR_BTYPE_MASK	0x00000c00
 #define PSR_SSBS_BIT	0x00001000
 #define PSR_PAN_BIT	0x00400000
 #define PSR_UAO_BIT	0x00800000
@@ -55,6 +56,8 @@
 #define PSR_Z_BIT	0x40000000
 #define PSR_N_BIT	0x80000000
 
+#define PSR_BTYPE_SHIFT		10
+
 /*
  * Groups of PSR bits
  */
@@ -63,6 +66,12 @@
 #define PSR_x		0x0000ff00	/* Extension		*/
 #define PSR_c		0x000000ff	/* Control		*/
 
+/* Convenience names for the values of PSTATE.BTYPE */
+#define PSR_BTYPE_NONE		(0b00 << PSR_BTYPE_SHIFT)
+#define PSR_BTYPE_JC		(0b01 << PSR_BTYPE_SHIFT)
+#define PSR_BTYPE_C		(0b10 << PSR_BTYPE_SHIFT)
+#define PSR_BTYPE_J		(0b11 << PSR_BTYPE_SHIFT)
+
 /* syscall emulation path in ptrace */
 #define PTRACE_SYSEMU		  31
 #define PTRACE_SYSEMU_SINGLESTEP  32
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index c19aa81ddc8c..7364de008bab 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -203,7 +203,7 @@ static void __init register_insn_emulation(struct insn_emulation_ops *ops)
 }
 
 static int emulation_proc_handler(struct ctl_table *table, int write,
-				  void __user *buffer, size_t *lenp,
+				  void *buffer, size_t *lenp,
 				  loff_t *ppos)
 {
 	int ret = 0;
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 9981a0a5a87f..890ddd67b8bf 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -92,9 +92,6 @@ int main(void)
   BLANK();
   DEFINE(CPU_BOOT_STACK,	offsetof(struct secondary_data, stack));
   DEFINE(CPU_BOOT_TASK,		offsetof(struct secondary_data, task));
-#ifdef CONFIG_ARM64_PTR_AUTH
-  DEFINE(CPU_BOOT_PTRAUTH_KEY,	offsetof(struct secondary_data, ptrauth_key));
-#endif
   BLANK();
 #ifdef CONFIG_KVM_ARM_HOST
   DEFINE(VCPU_CONTEXT,		offsetof(struct kvm_vcpu, arch.ctxt));
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 9fac745aa7bb..ba6b6ac07e27 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -3,6 +3,56 @@
  * Contains CPU feature definitions
  *
  * Copyright (C) 2015 ARM Ltd.
+ *
+ * A note for the weary kernel hacker: the code here is confusing and hard to
+ * follow! That's partly because it's solving a nasty problem, but also because
+ * there's a little bit of over-abstraction that tends to obscure what's going
+ * on behind a maze of helper functions and macros.
+ *
+ * The basic problem is that hardware folks have started gluing together CPUs
+ * with distinct architectural features; in some cases even creating SoCs where
+ * user-visible instructions are available only on a subset of the available
+ * cores. We try to address this by snapshotting the feature registers of the
+ * boot CPU and comparing these with the feature registers of each secondary
+ * CPU when bringing them up. If there is a mismatch, then we update the
+ * snapshot state to indicate the lowest-common denominator of the feature,
+ * known as the "safe" value. This snapshot state can be queried to view the
+ * "sanitised" value of a feature register.
+ *
+ * The sanitised register values are used to decide which capabilities we
+ * have in the system. These may be in the form of traditional "hwcaps"
+ * advertised to userspace or internal "cpucaps" which are used to configure
+ * things like alternative patching and static keys. While a feature mismatch
+ * may result in a TAINT_CPU_OUT_OF_SPEC kernel taint, a capability mismatch
+ * may prevent a CPU from being onlined at all.
+ *
+ * Some implementation details worth remembering:
+ *
+ * - Mismatched features are *always* sanitised to a "safe" value, which
+ *   usually indicates that the feature is not supported.
+ *
+ * - A mismatched feature marked with FTR_STRICT will cause a "SANITY CHECK"
+ *   warning when onlining an offending CPU and the kernel will be tainted
+ *   with TAINT_CPU_OUT_OF_SPEC.
+ *
+ * - Features marked as FTR_VISIBLE have their sanitised value visible to
+ *   userspace. FTR_VISIBLE features in registers that are only visible
+ *   to EL0 by trapping *must* have a corresponding HWCAP so that late
+ *   onlining of CPUs cannot lead to features disappearing at runtime.
+ *
+ * - A "feature" is typically a 4-bit register field. A "capability" is the
+ *   high-level description derived from the sanitised field value.
+ *
+ * - Read the Arm ARM (DDI 0487F.a) section D13.1.3 ("Principles of the ID
+ *   scheme for fields in ID registers") to understand when feature fields
+ *   may be signed or unsigned (FTR_SIGNED and FTR_UNSIGNED accordingly).
+ *
+ * - KVM exposes its own view of the feature registers to guest operating
+ *   systems regardless of FTR_VISIBLE. This is typically driven from the
+ *   sanitised register values to allow virtual CPUs to be migrated between
+ *   arbitrary physical CPUs, but some features not present on the host are
+ *   also advertised and emulated. Look at sys_reg_descs[] for the gory
+ *   details.
  */
 
 #define pr_fmt(fmt) "CPU features: " fmt
@@ -172,16 +222,17 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
-	/* Linux doesn't care about the EL3 */
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL3_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_SSBS_SHIFT, 4, ID_AA64PFR1_SSBS_PSTATE_NI),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_BTI),
+				    FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_BT_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
@@ -247,7 +298,7 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_FWB_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_AT_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_LVA_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_IESB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_IESB_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_LSM_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_UAO_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_CNP_SHIFT, 4, 0),
@@ -332,6 +383,18 @@ static const struct arm64_ftr_bits ftr_id_mmfr4[] = {
 	ARM64_FTR_END,
 };
 
+static const struct arm64_ftr_bits ftr_id_isar4[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_SWP_FRAC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_PSR_M_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_SYNCH_PRIM_FRAC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_BARRIER_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_SMC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_WRITEBACK_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_WITHSHIFTS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_UNPRIV_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
 static const struct arm64_ftr_bits ftr_id_isar6[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_I8MM_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_BF16_SHIFT, 4, 0),
@@ -351,6 +414,18 @@ static const struct arm64_ftr_bits ftr_id_pfr0[] = {
 	ARM64_FTR_END,
 };
 
+static const struct arm64_ftr_bits ftr_id_pfr1[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_GIC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_VIRT_FRAC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_SEC_FRAC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_GENTIMER_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_VIRTUALIZATION_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_MPROGMOD_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_SECURITY_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_PROGMOD_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
 static const struct arm64_ftr_bits ftr_id_dfr0[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
 	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0xf),	/* PerfMon */
@@ -411,7 +486,7 @@ static const struct __ftr_reg_entry {
 
 	/* Op1 = 0, CRn = 0, CRm = 1 */
 	ARM64_FTR_REG(SYS_ID_PFR0_EL1, ftr_id_pfr0),
-	ARM64_FTR_REG(SYS_ID_PFR1_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_ID_PFR1_EL1, ftr_id_pfr1),
 	ARM64_FTR_REG(SYS_ID_DFR0_EL1, ftr_id_dfr0),
 	ARM64_FTR_REG(SYS_ID_MMFR0_EL1, ftr_id_mmfr0),
 	ARM64_FTR_REG(SYS_ID_MMFR1_EL1, ftr_generic_32bits),
@@ -423,7 +498,7 @@ static const struct __ftr_reg_entry {
 	ARM64_FTR_REG(SYS_ID_ISAR1_EL1, ftr_generic_32bits),
 	ARM64_FTR_REG(SYS_ID_ISAR2_EL1, ftr_generic_32bits),
 	ARM64_FTR_REG(SYS_ID_ISAR3_EL1, ftr_generic_32bits),
-	ARM64_FTR_REG(SYS_ID_ISAR4_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_ID_ISAR4_EL1, ftr_id_isar4),
 	ARM64_FTR_REG(SYS_ID_ISAR5_EL1, ftr_id_isar5),
 	ARM64_FTR_REG(SYS_ID_MMFR4_EL1, ftr_id_mmfr4),
 	ARM64_FTR_REG(SYS_ID_ISAR6_EL1, ftr_id_isar6),
@@ -691,6 +766,96 @@ static int check_update_ftr_reg(u32 sys_id, int cpu, u64 val, u64 boot)
 	return 1;
 }
 
+static void relax_cpu_ftr_reg(u32 sys_id, int field)
+{
+	const struct arm64_ftr_bits *ftrp;
+	struct arm64_ftr_reg *regp = get_arm64_ftr_reg(sys_id);
+
+	if (WARN_ON(!regp))
+		return;
+
+	for (ftrp = regp->ftr_bits; ftrp->width; ftrp++) {
+		if (ftrp->shift == field) {
+			regp->strict_mask &= ~arm64_ftr_mask(ftrp);
+			break;
+		}
+	}
+
+	/* Bogus field? */
+	WARN_ON(!ftrp->width);
+}
+
+static int update_32bit_cpu_features(int cpu, struct cpuinfo_arm64 *info,
+				     struct cpuinfo_arm64 *boot)
+{
+	int taint = 0;
+	u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	/*
+	 * If we don't have AArch32 at all then skip the checks entirely
+	 * as the register values may be UNKNOWN and we're not going to be
+	 * using them for anything.
+	 */
+	if (!id_aa64pfr0_32bit_el0(pfr0))
+		return taint;
+
+	/*
+	 * If we don't have AArch32 at EL1, then relax the strictness of
+	 * EL1-dependent register fields to avoid spurious sanity check fails.
+	 */
+	if (!id_aa64pfr0_32bit_el1(pfr0)) {
+		relax_cpu_ftr_reg(SYS_ID_ISAR4_EL1, ID_ISAR4_SMC_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_VIRT_FRAC_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_SEC_FRAC_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_VIRTUALIZATION_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_SECURITY_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_PROGMOD_SHIFT);
+	}
+
+	taint |= check_update_ftr_reg(SYS_ID_DFR0_EL1, cpu,
+				      info->reg_id_dfr0, boot->reg_id_dfr0);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR0_EL1, cpu,
+				      info->reg_id_isar0, boot->reg_id_isar0);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR1_EL1, cpu,
+				      info->reg_id_isar1, boot->reg_id_isar1);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR2_EL1, cpu,
+				      info->reg_id_isar2, boot->reg_id_isar2);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR3_EL1, cpu,
+				      info->reg_id_isar3, boot->reg_id_isar3);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR4_EL1, cpu,
+				      info->reg_id_isar4, boot->reg_id_isar4);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR5_EL1, cpu,
+				      info->reg_id_isar5, boot->reg_id_isar5);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR6_EL1, cpu,
+				      info->reg_id_isar6, boot->reg_id_isar6);
+
+	/*
+	 * Regardless of the value of the AuxReg field, the AIFSR, ADFSR, and
+	 * ACTLR formats could differ across CPUs and therefore would have to
+	 * be trapped for virtualization anyway.
+	 */
+	taint |= check_update_ftr_reg(SYS_ID_MMFR0_EL1, cpu,
+				      info->reg_id_mmfr0, boot->reg_id_mmfr0);
+	taint |= check_update_ftr_reg(SYS_ID_MMFR1_EL1, cpu,
+				      info->reg_id_mmfr1, boot->reg_id_mmfr1);
+	taint |= check_update_ftr_reg(SYS_ID_MMFR2_EL1, cpu,
+				      info->reg_id_mmfr2, boot->reg_id_mmfr2);
+	taint |= check_update_ftr_reg(SYS_ID_MMFR3_EL1, cpu,
+				      info->reg_id_mmfr3, boot->reg_id_mmfr3);
+	taint |= check_update_ftr_reg(SYS_ID_PFR0_EL1, cpu,
+				      info->reg_id_pfr0, boot->reg_id_pfr0);
+	taint |= check_update_ftr_reg(SYS_ID_PFR1_EL1, cpu,
+				      info->reg_id_pfr1, boot->reg_id_pfr1);
+	taint |= check_update_ftr_reg(SYS_MVFR0_EL1, cpu,
+				      info->reg_mvfr0, boot->reg_mvfr0);
+	taint |= check_update_ftr_reg(SYS_MVFR1_EL1, cpu,
+				      info->reg_mvfr1, boot->reg_mvfr1);
+	taint |= check_update_ftr_reg(SYS_MVFR2_EL1, cpu,
+				      info->reg_mvfr2, boot->reg_mvfr2);
+
+	return taint;
+}
+
 /*
  * Update system wide CPU feature registers with the values from a
  * non-boot CPU. Also performs SANITY checks to make sure that there
@@ -753,9 +918,6 @@ void update_cpu_features(int cpu,
 	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR2_EL1, cpu,
 				      info->reg_id_aa64mmfr2, boot->reg_id_aa64mmfr2);
 
-	/*
-	 * EL3 is not our concern.
-	 */
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR0_EL1, cpu,
 				      info->reg_id_aa64pfr0, boot->reg_id_aa64pfr0);
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR1_EL1, cpu,
@@ -764,55 +926,6 @@ void update_cpu_features(int cpu,
 	taint |= check_update_ftr_reg(SYS_ID_AA64ZFR0_EL1, cpu,
 				      info->reg_id_aa64zfr0, boot->reg_id_aa64zfr0);
 
-	/*
-	 * If we have AArch32, we care about 32-bit features for compat.
-	 * If the system doesn't support AArch32, don't update them.
-	 */
-	if (id_aa64pfr0_32bit_el0(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1)) &&
-		id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0)) {
-
-		taint |= check_update_ftr_reg(SYS_ID_DFR0_EL1, cpu,
-					info->reg_id_dfr0, boot->reg_id_dfr0);
-		taint |= check_update_ftr_reg(SYS_ID_ISAR0_EL1, cpu,
-					info->reg_id_isar0, boot->reg_id_isar0);
-		taint |= check_update_ftr_reg(SYS_ID_ISAR1_EL1, cpu,
-					info->reg_id_isar1, boot->reg_id_isar1);
-		taint |= check_update_ftr_reg(SYS_ID_ISAR2_EL1, cpu,
-					info->reg_id_isar2, boot->reg_id_isar2);
-		taint |= check_update_ftr_reg(SYS_ID_ISAR3_EL1, cpu,
-					info->reg_id_isar3, boot->reg_id_isar3);
-		taint |= check_update_ftr_reg(SYS_ID_ISAR4_EL1, cpu,
-					info->reg_id_isar4, boot->reg_id_isar4);
-		taint |= check_update_ftr_reg(SYS_ID_ISAR5_EL1, cpu,
-					info->reg_id_isar5, boot->reg_id_isar5);
-		taint |= check_update_ftr_reg(SYS_ID_ISAR6_EL1, cpu,
-					info->reg_id_isar6, boot->reg_id_isar6);
-
-		/*
-		 * Regardless of the value of the AuxReg field, the AIFSR, ADFSR, and
-		 * ACTLR formats could differ across CPUs and therefore would have to
-		 * be trapped for virtualization anyway.
-		 */
-		taint |= check_update_ftr_reg(SYS_ID_MMFR0_EL1, cpu,
-					info->reg_id_mmfr0, boot->reg_id_mmfr0);
-		taint |= check_update_ftr_reg(SYS_ID_MMFR1_EL1, cpu,
-					info->reg_id_mmfr1, boot->reg_id_mmfr1);
-		taint |= check_update_ftr_reg(SYS_ID_MMFR2_EL1, cpu,
-					info->reg_id_mmfr2, boot->reg_id_mmfr2);
-		taint |= check_update_ftr_reg(SYS_ID_MMFR3_EL1, cpu,
-					info->reg_id_mmfr3, boot->reg_id_mmfr3);
-		taint |= check_update_ftr_reg(SYS_ID_PFR0_EL1, cpu,
-					info->reg_id_pfr0, boot->reg_id_pfr0);
-		taint |= check_update_ftr_reg(SYS_ID_PFR1_EL1, cpu,
-					info->reg_id_pfr1, boot->reg_id_pfr1);
-		taint |= check_update_ftr_reg(SYS_MVFR0_EL1, cpu,
-					info->reg_mvfr0, boot->reg_mvfr0);
-		taint |= check_update_ftr_reg(SYS_MVFR1_EL1, cpu,
-					info->reg_mvfr1, boot->reg_mvfr1);
-		taint |= check_update_ftr_reg(SYS_MVFR2_EL1, cpu,
-					info->reg_mvfr2, boot->reg_mvfr2);
-	}
-
 	if (id_aa64pfr0_sve(info->reg_id_aa64pfr0)) {
 		taint |= check_update_ftr_reg(SYS_ZCR_EL1, cpu,
 					info->reg_zcr, boot->reg_zcr);
@@ -823,6 +936,12 @@ void update_cpu_features(int cpu,
 			sve_update_vq_map();
 	}
 
+	/*
+	 * This relies on a sanitised view of the AArch64 ID registers
+	 * (e.g. SYS_ID_AA64PFR0_EL1), so we call it last.
+	 */
+	taint |= update_32bit_cpu_features(cpu, info, boot);
+
 	/*
 	 * Mismatched CPU features are a recipe for disaster. Don't even
 	 * pretend to support them.
@@ -1409,6 +1528,21 @@ static bool can_use_gic_priorities(const struct arm64_cpu_capabilities *entry,
 }
 #endif
 
+#ifdef CONFIG_ARM64_BTI
+static void bti_enable(const struct arm64_cpu_capabilities *__unused)
+{
+	/*
+	 * Use of X16/X17 for tail-calls and trampolines that jump to
+	 * function entry points using BR is a requirement for
+	 * marking binaries with GNU_PROPERTY_AARCH64_FEATURE_1_BTI.
+	 * So, be strict and forbid other BRs using other registers to
+	 * jump onto a PACIxSP instruction:
+	 */
+	sysreg_clear_set(sctlr_el1, 0, SCTLR_EL1_BT0 | SCTLR_EL1_BT1);
+	isb();
+}
+#endif /* CONFIG_ARM64_BTI */
+
 /* Internal helper functions to match cpu capability type */
 static bool
 cpucap_late_cpu_optional(const struct arm64_cpu_capabilities *cap)
@@ -1511,6 +1645,18 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.field_pos = ID_AA64PFR0_EL0_SHIFT,
 		.min_field_value = ID_AA64PFR0_EL0_32BIT_64BIT,
 	},
+#ifdef CONFIG_KVM
+	{
+		.desc = "32-bit EL1 Support",
+		.capability = ARM64_HAS_32BIT_EL1,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		.sys_reg = SYS_ID_AA64PFR0_EL1,
+		.sign = FTR_UNSIGNED,
+		.field_pos = ID_AA64PFR0_EL1_SHIFT,
+		.min_field_value = ID_AA64PFR0_EL1_32BIT_64BIT,
+	},
+#endif
 	{
 		.desc = "Kernel page table isolation (KPTI)",
 		.capability = ARM64_UNMAP_KERNEL_AT_EL0,
@@ -1778,6 +1924,19 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sign = FTR_UNSIGNED,
 		.min_field_value = 1,
 	},
+#endif
+#ifdef CONFIG_ARM64_BTI
+	{
+		.desc = "Branch Target Identification",
+		.capability = ARM64_BTI,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		.cpu_enable = bti_enable,
+		.sys_reg = SYS_ID_AA64PFR1_EL1,
+		.field_pos = ID_AA64PFR1_BT_SHIFT,
+		.min_field_value = ID_AA64PFR1_BT_BTI,
+		.sign = FTR_UNSIGNED,
+	},
 #endif
 	{},
 };
@@ -1888,6 +2047,9 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_F64MM_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_F64MM, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
 #endif
 	HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_SSBS_SHIFT, FTR_UNSIGNED, ID_AA64PFR1_SSBS_PSTATE_INSNS, CAP_HWCAP, KERNEL_HWCAP_SSBS),
+#ifdef CONFIG_ARM64_BTI
+	HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_BT_SHIFT, FTR_UNSIGNED, ID_AA64PFR1_BT_BTI, CAP_HWCAP, KERNEL_HWCAP_BTI),
+#endif
 #ifdef CONFIG_ARM64_PTR_AUTH
 	HWCAP_MULTI_CAP(ptr_auth_hwcap_addr_matches, CAP_HWCAP, KERNEL_HWCAP_PACA),
 	HWCAP_MULTI_CAP(ptr_auth_hwcap_gen_matches, CAP_HWCAP, KERNEL_HWCAP_PACG),
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 86136075ae41..5e47e93b5dc1 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -92,6 +92,7 @@ static const char *const hwcap_str[] = {
 	"bf16",
 	"dgh",
 	"rng",
+	"bti",
 	NULL
 };
 
diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S
index 1a03618df0df..303642975a93 100644
--- a/arch/arm64/kernel/efi-entry.S
+++ b/arch/arm64/kernel/efi-entry.S
@@ -19,7 +19,7 @@ SYM_CODE_START(efi_enter_kernel)
 	 * point stored in x0. Save those values in registers which are
 	 * callee preserved.
 	 */
-	ldr	w2, =stext_offset
+	ldr	w2, =primary_entry_offset
 	add	x19, x0, x2		// relocated Image entrypoint
 	mov	x20, x1			// DTB address
 
diff --git a/arch/arm64/kernel/efi-header.S b/arch/arm64/kernel/efi-header.S
index 914999ccaf8a..6f58998ef647 100644
--- a/arch/arm64/kernel/efi-header.S
+++ b/arch/arm64/kernel/efi-header.S
@@ -32,7 +32,7 @@ optional_header:
 
 extra_header_fields:
 	.quad	0					// ImageBase
-	.long	SZ_4K					// SectionAlignment
+	.long	SEGMENT_ALIGN				// SectionAlignment
 	.long	PECOFF_FILE_ALIGNMENT			// FileAlignment
 	.short	0					// MajorOperatingSystemVersion
 	.short	0					// MinorOperatingSystemVersion
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index c839b5bf1904..3dbdf9752b11 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -94,7 +94,7 @@ asmlinkage void notrace el1_sync_handler(struct pt_regs *regs)
 		break;
 	default:
 		el1_inv(regs, esr);
-	};
+	}
 }
 NOKPROBE_SYMBOL(el1_sync_handler);
 
@@ -188,6 +188,14 @@ static void notrace el0_undef(struct pt_regs *regs)
 }
 NOKPROBE_SYMBOL(el0_undef);
 
+static void notrace el0_bti(struct pt_regs *regs)
+{
+	user_exit_irqoff();
+	local_daif_restore(DAIF_PROCCTX);
+	do_bti(regs);
+}
+NOKPROBE_SYMBOL(el0_bti);
+
 static void notrace el0_inv(struct pt_regs *regs, unsigned long esr)
 {
 	user_exit_irqoff();
@@ -255,6 +263,9 @@ asmlinkage void notrace el0_sync_handler(struct pt_regs *regs)
 	case ESR_ELx_EC_UNKNOWN:
 		el0_undef(regs);
 		break;
+	case ESR_ELx_EC_BTI:
+		el0_bti(regs);
+		break;
 	case ESR_ELx_EC_BREAKPT_LOW:
 	case ESR_ELx_EC_SOFTSTP_LOW:
 	case ESR_ELx_EC_WATCHPT_LOW:
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index ddcde093c433..a9265fef914f 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -178,7 +178,7 @@ alternative_cb_end
 
 	apply_ssbd 1, x22, x23
 
-	ptrauth_keys_install_kernel tsk, 1, x20, x22, x23
+	ptrauth_keys_install_kernel tsk, x20, x22, x23
 	.else
 	add	x21, sp, #S_FRAME_SIZE
 	get_current_task tsk
@@ -900,7 +900,7 @@ SYM_FUNC_START(cpu_switch_to)
 	ldr	lr, [x8]
 	mov	sp, x9
 	msr	sp_el0, x1
-	ptrauth_keys_install_kernel x1, 1, x8, x9, x10
+	ptrauth_keys_install_kernel x1, x8, x9, x10
 	ret
 SYM_FUNC_END(cpu_switch_to)
 NOKPROBE(cpu_switch_to)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 94289d126993..35cb5e66c504 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -341,8 +341,7 @@ static unsigned int find_supported_vector_length(unsigned int vl)
 #ifdef CONFIG_SYSCTL
 
 static int sve_proc_do_default_vl(struct ctl_table *table, int write,
-				  void __user *buffer, size_t *lenp,
-				  loff_t *ppos)
+				  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 	int vl = sve_default_vl;
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 57a91032b4c2..340d60d2e218 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/irqchip/arm-gic-v3.h>
 
+#include <asm/asm_pointer_auth.h>
 #include <asm/assembler.h>
 #include <asm/boot.h>
 #include <asm/ptrace.h>
@@ -70,9 +71,9 @@ _head:
 	 * its opcode forms the magic "MZ" signature required by UEFI.
 	 */
 	add	x13, x18, #0x16
-	b	stext
+	b	primary_entry
 #else
-	b	stext				// branch to kernel start, magic
+	b	primary_entry			// branch to kernel start, magic
 	.long	0				// reserved
 #endif
 	le64sym	_kernel_offset_le		// Image load offset from start of RAM, little-endian
@@ -98,14 +99,13 @@ pe_header:
 	 * primary lowlevel boot path:
 	 *
 	 *  Register   Scope                      Purpose
-	 *  x21        stext() .. start_kernel()  FDT pointer passed at boot in x0
-	 *  x23        stext() .. start_kernel()  physical misalignment/KASLR offset
-	 *  x28        __create_page_tables()     callee preserved temp register
-	 *  x19/x20    __primary_switch()         callee preserved temp registers
-	 *  x24        __primary_switch() .. relocate_kernel()
-	 *                                        current RELR displacement
+	 *  x21        primary_entry() .. start_kernel()        FDT pointer passed at boot in x0
+	 *  x23        primary_entry() .. start_kernel()        physical misalignment/KASLR offset
+	 *  x28        __create_page_tables()                   callee preserved temp register
+	 *  x19/x20    __primary_switch()                       callee preserved temp registers
+	 *  x24        __primary_switch() .. relocate_kernel()  current RELR displacement
 	 */
-SYM_CODE_START(stext)
+SYM_CODE_START(primary_entry)
 	bl	preserve_boot_args
 	bl	el2_setup			// Drop to EL1, w0=cpu_boot_mode
 	adrp	x23, __PHYS_OFFSET
@@ -118,10 +118,9 @@ SYM_CODE_START(stext)
 	 * On return, the CPU will be ready for the MMU to be turned on and
 	 * the TCR will have been set.
 	 */
-	mov	x0, #ARM64_CPU_BOOT_PRIMARY
 	bl	__cpu_setup			// initialise processor
 	b	__primary_switch
-SYM_CODE_END(stext)
+SYM_CODE_END(primary_entry)
 
 /*
  * Preserve the arguments passed by the bootloader in x0 .. x3
@@ -394,13 +393,19 @@ SYM_FUNC_START_LOCAL(__create_page_tables)
 
 	/*
 	 * Since the page tables have been populated with non-cacheable
-	 * accesses (MMU disabled), invalidate the idmap and swapper page
-	 * tables again to remove any speculatively loaded cache lines.
+	 * accesses (MMU disabled), invalidate those tables again to
+	 * remove any speculatively loaded cache lines.
 	 */
+	dmb	sy
+
 	adrp	x0, idmap_pg_dir
+	adrp	x1, idmap_pg_end
+	sub	x1, x1, x0
+	bl	__inval_dcache_area
+
+	adrp	x0, init_pg_dir
 	adrp	x1, init_pg_end
 	sub	x1, x1, x0
-	dmb	sy
 	bl	__inval_dcache_area
 
 	ret	x28
@@ -417,6 +422,10 @@ SYM_FUNC_START_LOCAL(__primary_switched)
 	adr_l	x5, init_task
 	msr	sp_el0, x5			// Save thread_info
 
+#ifdef CONFIG_ARM64_PTR_AUTH
+	__ptrauth_keys_init_cpu	x5, x6, x7, x8
+#endif
+
 	adr_l	x8, vectors			// load VBAR_EL1 with virtual
 	msr	vbar_el1, x8			// vector table address
 	isb
@@ -717,7 +726,6 @@ SYM_FUNC_START_LOCAL(secondary_startup)
 	 * Common entry point for secondary CPUs.
 	 */
 	bl	__cpu_secondary_check52bitva
-	mov	x0, #ARM64_CPU_BOOT_SECONDARY
 	bl	__cpu_setup			// initialise processor
 	adrp	x1, swapper_pg_dir
 	bl	__enable_mmu
@@ -739,6 +747,11 @@ SYM_FUNC_START_LOCAL(__secondary_switched)
 	msr	sp_el0, x2
 	mov	x29, #0
 	mov	x30, #0
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+	ptrauth_keys_init_cpu x2, x3, x4, x5
+#endif
+
 	b	secondary_start_kernel
 SYM_FUNC_END(__secondary_switched)
 
diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c
index 5b73e92c99e3..a8a4b55f3a09 100644
--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@@ -184,6 +184,7 @@ static int trans_pgd_map_page(pgd_t *trans_pgd, void *page,
 		       pgprot_t pgprot)
 {
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
@@ -196,7 +197,15 @@ static int trans_pgd_map_page(pgd_t *trans_pgd, void *page,
 		pgd_populate(&init_mm, pgdp, pudp);
 	}
 
-	pudp = pud_offset(pgdp, dst_addr);
+	p4dp = p4d_offset(pgdp, dst_addr);
+	if (p4d_none(READ_ONCE(*p4dp))) {
+		pudp = (void *)get_safe_page(GFP_ATOMIC);
+		if (!pudp)
+			return -ENOMEM;
+		p4d_populate(&init_mm, p4dp, pudp);
+	}
+
+	pudp = pud_offset(p4dp, dst_addr);
 	if (pud_none(READ_ONCE(*pudp))) {
 		pmdp = (void *)get_safe_page(GFP_ATOMIC);
 		if (!pmdp)
@@ -419,7 +428,7 @@ static int copy_pmd(pud_t *dst_pudp, pud_t *src_pudp, unsigned long start,
 	return 0;
 }
 
-static int copy_pud(pgd_t *dst_pgdp, pgd_t *src_pgdp, unsigned long start,
+static int copy_pud(p4d_t *dst_p4dp, p4d_t *src_p4dp, unsigned long start,
 		    unsigned long end)
 {
 	pud_t *dst_pudp;
@@ -427,15 +436,15 @@ static int copy_pud(pgd_t *dst_pgdp, pgd_t *src_pgdp, unsigned long start,
 	unsigned long next;
 	unsigned long addr = start;
 
-	if (pgd_none(READ_ONCE(*dst_pgdp))) {
+	if (p4d_none(READ_ONCE(*dst_p4dp))) {
 		dst_pudp = (pud_t *)get_safe_page(GFP_ATOMIC);
 		if (!dst_pudp)
 			return -ENOMEM;
-		pgd_populate(&init_mm, dst_pgdp, dst_pudp);
+		p4d_populate(&init_mm, dst_p4dp, dst_pudp);
 	}
-	dst_pudp = pud_offset(dst_pgdp, start);
+	dst_pudp = pud_offset(dst_p4dp, start);
 
-	src_pudp = pud_offset(src_pgdp, start);
+	src_pudp = pud_offset(src_p4dp, start);
 	do {
 		pud_t pud = READ_ONCE(*src_pudp);
 
@@ -454,6 +463,27 @@ static int copy_pud(pgd_t *dst_pgdp, pgd_t *src_pgdp, unsigned long start,
 	return 0;
 }
 
+static int copy_p4d(pgd_t *dst_pgdp, pgd_t *src_pgdp, unsigned long start,
+		    unsigned long end)
+{
+	p4d_t *dst_p4dp;
+	p4d_t *src_p4dp;
+	unsigned long next;
+	unsigned long addr = start;
+
+	dst_p4dp = p4d_offset(dst_pgdp, start);
+	src_p4dp = p4d_offset(src_pgdp, start);
+	do {
+		next = p4d_addr_end(addr, end);
+		if (p4d_none(READ_ONCE(*src_p4dp)))
+			continue;
+		if (copy_pud(dst_p4dp, src_p4dp, addr, next))
+			return -ENOMEM;
+	} while (dst_p4dp++, src_p4dp++, addr = next, addr != end);
+
+	return 0;
+}
+
 static int copy_page_tables(pgd_t *dst_pgdp, unsigned long start,
 			    unsigned long end)
 {
@@ -466,7 +496,7 @@ static int copy_page_tables(pgd_t *dst_pgdp, unsigned long start,
 		next = pgd_addr_end(addr, end);
 		if (pgd_none(READ_ONCE(*src_pgdp)))
 			continue;
-		if (copy_pud(dst_pgdp, src_pgdp, addr, next))
+		if (copy_p4d(dst_pgdp, src_pgdp, addr, next))
 			return -ENOMEM;
 	} while (dst_pgdp++, src_pgdp++, addr = next, addr != end);
 
diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h
index 7f06ad93fc95..be0a63ffed23 100644
--- a/arch/arm64/kernel/image-vars.h
+++ b/arch/arm64/kernel/image-vars.h
@@ -13,7 +13,7 @@
 #ifdef CONFIG_EFI
 
 __efistub_kernel_size		= _edata - _text;
-__efistub_stext_offset		= stext - _text;
+__efistub_primary_entry_offset	= primary_entry - _text;
 
 
 /*
diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c
index b40c3b0def92..e5cbf91aadfe 100644
--- a/arch/arm64/kernel/machine_kexec_file.c
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -138,12 +138,12 @@ static int setup_dtb(struct kimage *image,
 
 	/* add rng-seed */
 	if (rng_is_initialized()) {
-		u8 rng_seed[RNG_SEED_SIZE];
-		get_random_bytes(rng_seed, RNG_SEED_SIZE);
-		ret = fdt_setprop(dtb, off, FDT_PROP_RNG_SEED, rng_seed,
-				RNG_SEED_SIZE);
+		void *rng_seed;
+		ret = fdt_setprop_placeholder(dtb, off, FDT_PROP_RNG_SEED,
+				RNG_SEED_SIZE, &rng_seed);
 		if (ret)
 			goto out;
+		get_random_bytes(rng_seed, RNG_SEED_SIZE);
 	} else {
 		pr_notice("RNG is not initialised: omitting \"%s\" property\n",
 				FDT_PROP_RNG_SEED);
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 56be4cbf771f..6089638c7d43 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -11,6 +11,7 @@
 
 #include <linux/compat.h>
 #include <linux/efi.h>
+#include <linux/elf.h>
 #include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
@@ -18,6 +19,7 @@
 #include <linux/sched/task_stack.h>
 #include <linux/kernel.h>
 #include <linux/lockdep.h>
+#include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/sysctl.h>
@@ -209,6 +211,15 @@ void machine_restart(char *cmd)
 	while (1);
 }
 
+#define bstr(suffix, str) [PSR_BTYPE_ ## suffix >> PSR_BTYPE_SHIFT] = str
+static const char *const btypes[] = {
+	bstr(NONE, "--"),
+	bstr(  JC, "jc"),
+	bstr(   C, "-c"),
+	bstr(  J , "j-")
+};
+#undef bstr
+
 static void print_pstate(struct pt_regs *regs)
 {
 	u64 pstate = regs->pstate;
@@ -227,7 +238,10 @@ static void print_pstate(struct pt_regs *regs)
 			pstate & PSR_AA32_I_BIT ? 'I' : 'i',
 			pstate & PSR_AA32_F_BIT ? 'F' : 'f');
 	} else {
-		printk("pstate: %08llx (%c%c%c%c %c%c%c%c %cPAN %cUAO)\n",
+		const char *btype_str = btypes[(pstate & PSR_BTYPE_MASK) >>
+					       PSR_BTYPE_SHIFT];
+
+		printk("pstate: %08llx (%c%c%c%c %c%c%c%c %cPAN %cUAO BTYPE=%s)\n",
 			pstate,
 			pstate & PSR_N_BIT ? 'N' : 'n',
 			pstate & PSR_Z_BIT ? 'Z' : 'z',
@@ -238,7 +252,8 @@ static void print_pstate(struct pt_regs *regs)
 			pstate & PSR_I_BIT ? 'I' : 'i',
 			pstate & PSR_F_BIT ? 'F' : 'f',
 			pstate & PSR_PAN_BIT ? '+' : '-',
-			pstate & PSR_UAO_BIT ? '+' : '-');
+			pstate & PSR_UAO_BIT ? '+' : '-',
+			btype_str);
 	}
 }
 
@@ -291,7 +306,7 @@ void __show_regs(struct pt_regs *regs)
 void show_regs(struct pt_regs * regs)
 {
 	__show_regs(regs);
-	dump_backtrace(regs, NULL);
+	dump_backtrace(regs, NULL, KERN_DEFAULT);
 }
 
 static void tls_thread_flush(void)
@@ -655,3 +670,25 @@ asmlinkage void __sched arm64_preempt_schedule_irq(void)
 	if (system_capabilities_finalized())
 		preempt_schedule_irq();
 }
+
+#ifdef CONFIG_BINFMT_ELF
+int arch_elf_adjust_prot(int prot, const struct arch_elf_state *state,
+			 bool has_interp, bool is_interp)
+{
+	/*
+	 * For dynamically linked executables the interpreter is
+	 * responsible for setting PROT_BTI on everything except
+	 * itself.
+	 */
+	if (is_interp != has_interp)
+		return prot;
+
+	if (!(state->flags & ARM64_ELF_BTI))
+		return prot;
+
+	if (prot & PROT_EXEC)
+		prot |= PROT_BTI;
+
+	return prot;
+}
+#endif
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index b3d3005d9515..585dd7f5c826 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1874,7 +1874,7 @@ void syscall_trace_exit(struct pt_regs *regs)
  */
 #define SPSR_EL1_AARCH64_RES0_BITS \
 	(GENMASK_ULL(63, 32) | GENMASK_ULL(27, 25) | GENMASK_ULL(23, 22) | \
-	 GENMASK_ULL(20, 13) | GENMASK_ULL(11, 10) | GENMASK_ULL(5, 5))
+	 GENMASK_ULL(20, 13) | GENMASK_ULL(5, 5))
 #define SPSR_EL1_AARCH32_RES0_BITS \
 	(GENMASK_ULL(63, 32) | GENMASK_ULL(22, 22) | GENMASK_ULL(20, 20))
 
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 339882db5a91..801d56cdf701 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -732,6 +732,22 @@ static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
 	regs->regs[29] = (unsigned long)&user->next_frame->fp;
 	regs->pc = (unsigned long)ka->sa.sa_handler;
 
+	/*
+	 * Signal delivery is a (wacky) indirect function call in
+	 * userspace, so simulate the same setting of BTYPE as a BLR
+	 * <register containing the signal handler entry point>.
+	 * Signal delivery to a location in a PROT_BTI guarded page
+	 * that is not a function entry point will now trigger a
+	 * SIGILL in userspace.
+	 *
+	 * If the signal handler entry point is not in a PROT_BTI
+	 * guarded page, this is harmless.
+	 */
+	if (system_supports_bti()) {
+		regs->pstate &= ~PSR_BTYPE_MASK;
+		regs->pstate |= PSR_BTYPE_C;
+	}
+
 	if (ka->sa.sa_flags & SA_RESTORER)
 		sigtramp = ka->sa.sa_restorer;
 	else
diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S
index 7b2f2e650c44..56b1fe9bfaa0 100644
--- a/arch/arm64/kernel/sleep.S
+++ b/arch/arm64/kernel/sleep.S
@@ -100,7 +100,6 @@ ENDPROC(__cpu_suspend_enter)
 	.pushsection ".idmap.text", "awx"
 ENTRY(cpu_resume)
 	bl	el2_setup		// if in EL2 drop to EL1 cleanly
-	mov	x0, #ARM64_CPU_RUNTIME
 	bl	__cpu_setup
 	/* enable the MMU early - so we can access sleep_save_stash by va */
 	adrp	x1, swapper_pg_dir
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 061f60fe452f..0516a43b555b 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -65,7 +65,7 @@ EXPORT_PER_CPU_SYMBOL(cpu_number);
  */
 struct secondary_data secondary_data;
 /* Number of CPUs which aren't online, but looping in kernel text. */
-int cpus_stuck_in_kernel;
+static int cpus_stuck_in_kernel;
 
 enum ipi_msg_type {
 	IPI_RESCHEDULE,
@@ -114,10 +114,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	 */
 	secondary_data.task = idle;
 	secondary_data.stack = task_stack_page(idle) + THREAD_SIZE;
-#if defined(CONFIG_ARM64_PTR_AUTH)
-	secondary_data.ptrauth_key.apia.lo = idle->thread.keys_kernel.apia.lo;
-	secondary_data.ptrauth_key.apia.hi = idle->thread.keys_kernel.apia.hi;
-#endif
 	update_cpu_boot_status(CPU_MMU_OFF);
 	__flush_dcache_area(&secondary_data, sizeof(secondary_data));
 
@@ -140,10 +136,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	pr_crit("CPU%u: failed to come online\n", cpu);
 	secondary_data.task = NULL;
 	secondary_data.stack = NULL;
-#if defined(CONFIG_ARM64_PTR_AUTH)
-	secondary_data.ptrauth_key.apia.lo = 0;
-	secondary_data.ptrauth_key.apia.hi = 0;
-#endif
 	__flush_dcache_area(&secondary_data, sizeof(secondary_data));
 	status = READ_ONCE(secondary_data.status);
 	if (status == CPU_MMU_OFF)
diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index a12c0c88d345..5f5b868292f5 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -98,6 +98,24 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	regs->orig_x0 = regs->regs[0];
 	regs->syscallno = scno;
 
+	/*
+	 * BTI note:
+	 * The architecture does not guarantee that SPSR.BTYPE is zero
+	 * on taking an SVC, so we could return to userspace with a
+	 * non-zero BTYPE after the syscall.
+	 *
+	 * This shouldn't matter except when userspace is explicitly
+	 * doing something stupid, such as setting PROT_BTI on a page
+	 * that lacks conforming BTI/PACIxSP instructions, falling
+	 * through from one executable page to another with differing
+	 * PROT_BTI, or messing with BTYPE via ptrace: in such cases,
+	 * userspace should not be surprised if a SIGILL occurs on
+	 * syscall return.
+	 *
+	 * So, don't touch regs->pstate & PSR_BTYPE_MASK here.
+	 * (Similarly for HVC and SMC elsewhere.)
+	 */
+
 	cortex_a76_erratum_1463225_svc_handler();
 	local_daif_restore(DAIF_PROCCTX);
 	user_exit();
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index cf402be5c573..a4b5292459f3 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -53,9 +53,9 @@ static const char *handler[]= {
 
 int show_unhandled_signals = 0;
 
-static void dump_backtrace_entry(unsigned long where)
+static void dump_backtrace_entry(unsigned long where, const char *loglvl)
 {
-	printk(" %pS\n", (void *)where);
+	printk("%s %pS\n", loglvl, (void *)where);
 }
 
 static void dump_kernel_instr(const char *lvl, struct pt_regs *regs)
@@ -83,7 +83,8 @@ static void dump_kernel_instr(const char *lvl, struct pt_regs *regs)
 	printk("%sCode: %s\n", lvl, str);
 }
 
-void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		    const char *loglvl)
 {
 	struct stackframe frame;
 	int skip = 0;
@@ -115,11 +116,11 @@ void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 				thread_saved_pc(tsk));
 	}
 
-	printk("Call trace:\n");
+	printk("%sCall trace:\n", loglvl);
 	do {
 		/* skip until specified stack frame */
 		if (!skip) {
-			dump_backtrace_entry(frame.pc);
+			dump_backtrace_entry(frame.pc, loglvl);
 		} else if (frame.fp == regs->regs[29]) {
 			skip = 0;
 			/*
@@ -129,16 +130,16 @@ void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 			 * at which an exception has taken place, use regs->pc
 			 * instead.
 			 */
-			dump_backtrace_entry(regs->pc);
+			dump_backtrace_entry(regs->pc, loglvl);
 		}
 	} while (!unwind_frame(tsk, &frame));
 
 	put_task_stack(tsk);
 }
 
-void show_stack(struct task_struct *tsk, unsigned long *sp)
+void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 {
-	dump_backtrace(NULL, tsk);
+	dump_backtrace(NULL, tsk, loglvl);
 	barrier();
 }
 
@@ -272,6 +273,61 @@ void arm64_notify_die(const char *str, struct pt_regs *regs,
 	}
 }
 
+#ifdef CONFIG_COMPAT
+#define PSTATE_IT_1_0_SHIFT	25
+#define PSTATE_IT_1_0_MASK	(0x3 << PSTATE_IT_1_0_SHIFT)
+#define PSTATE_IT_7_2_SHIFT	10
+#define PSTATE_IT_7_2_MASK	(0x3f << PSTATE_IT_7_2_SHIFT)
+
+static u32 compat_get_it_state(struct pt_regs *regs)
+{
+	u32 it, pstate = regs->pstate;
+
+	it  = (pstate & PSTATE_IT_1_0_MASK) >> PSTATE_IT_1_0_SHIFT;
+	it |= ((pstate & PSTATE_IT_7_2_MASK) >> PSTATE_IT_7_2_SHIFT) << 2;
+
+	return it;
+}
+
+static void compat_set_it_state(struct pt_regs *regs, u32 it)
+{
+	u32 pstate_it;
+
+	pstate_it  = (it << PSTATE_IT_1_0_SHIFT) & PSTATE_IT_1_0_MASK;
+	pstate_it |= ((it >> 2) << PSTATE_IT_7_2_SHIFT) & PSTATE_IT_7_2_MASK;
+
+	regs->pstate &= ~PSR_AA32_IT_MASK;
+	regs->pstate |= pstate_it;
+}
+
+static void advance_itstate(struct pt_regs *regs)
+{
+	u32 it;
+
+	/* ARM mode */
+	if (!(regs->pstate & PSR_AA32_T_BIT) ||
+	    !(regs->pstate & PSR_AA32_IT_MASK))
+		return;
+
+	it  = compat_get_it_state(regs);
+
+	/*
+	 * If this is the last instruction of the block, wipe the IT
+	 * state. Otherwise advance it.
+	 */
+	if (!(it & 7))
+		it = 0;
+	else
+		it = (it & 0xe0) | ((it << 1) & 0x1f);
+
+	compat_set_it_state(regs, it);
+}
+#else
+static void advance_itstate(struct pt_regs *regs)
+{
+}
+#endif
+
 void arm64_skip_faulting_instruction(struct pt_regs *regs, unsigned long size)
 {
 	regs->pc += size;
@@ -282,6 +338,11 @@ void arm64_skip_faulting_instruction(struct pt_regs *regs, unsigned long size)
 	 */
 	if (user_mode(regs))
 		user_fastforward_single_step(current);
+
+	if (compat_user_mode(regs))
+		advance_itstate(regs);
+	else
+		regs->pstate &= ~PSR_BTYPE_MASK;
 }
 
 static LIST_HEAD(undef_hook);
@@ -411,6 +472,13 @@ void do_undefinstr(struct pt_regs *regs)
 }
 NOKPROBE_SYMBOL(do_undefinstr);
 
+void do_bti(struct pt_regs *regs)
+{
+	BUG_ON(!user_mode(regs));
+	force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc);
+}
+NOKPROBE_SYMBOL(do_bti);
+
 #define __user_cache_maint(insn, address, res)			\
 	if (address >= user_addr_max()) {			\
 		res = -EFAULT;					\
@@ -566,34 +634,7 @@ static const struct sys64_hook sys64_hooks[] = {
 	{},
 };
 
-
 #ifdef CONFIG_COMPAT
-#define PSTATE_IT_1_0_SHIFT	25
-#define PSTATE_IT_1_0_MASK	(0x3 << PSTATE_IT_1_0_SHIFT)
-#define PSTATE_IT_7_2_SHIFT	10
-#define PSTATE_IT_7_2_MASK	(0x3f << PSTATE_IT_7_2_SHIFT)
-
-static u32 compat_get_it_state(struct pt_regs *regs)
-{
-	u32 it, pstate = regs->pstate;
-
-	it  = (pstate & PSTATE_IT_1_0_MASK) >> PSTATE_IT_1_0_SHIFT;
-	it |= ((pstate & PSTATE_IT_7_2_MASK) >> PSTATE_IT_7_2_SHIFT) << 2;
-
-	return it;
-}
-
-static void compat_set_it_state(struct pt_regs *regs, u32 it)
-{
-	u32 pstate_it;
-
-	pstate_it  = (it << PSTATE_IT_1_0_SHIFT) & PSTATE_IT_1_0_MASK;
-	pstate_it |= ((it >> 2) << PSTATE_IT_7_2_SHIFT) & PSTATE_IT_7_2_MASK;
-
-	regs->pstate &= ~PSR_AA32_IT_MASK;
-	regs->pstate |= pstate_it;
-}
-
 static bool cp15_cond_valid(unsigned int esr, struct pt_regs *regs)
 {
 	int cond;
@@ -614,42 +655,12 @@ static bool cp15_cond_valid(unsigned int esr, struct pt_regs *regs)
 	return aarch32_opcode_cond_checks[cond](regs->pstate);
 }
 
-static void advance_itstate(struct pt_regs *regs)
-{
-	u32 it;
-
-	/* ARM mode */
-	if (!(regs->pstate & PSR_AA32_T_BIT) ||
-	    !(regs->pstate & PSR_AA32_IT_MASK))
-		return;
-
-	it  = compat_get_it_state(regs);
-
-	/*
-	 * If this is the last instruction of the block, wipe the IT
-	 * state. Otherwise advance it.
-	 */
-	if (!(it & 7))
-		it = 0;
-	else
-		it = (it & 0xe0) | ((it << 1) & 0x1f);
-
-	compat_set_it_state(regs, it);
-}
-
-static void arm64_compat_skip_faulting_instruction(struct pt_regs *regs,
-						   unsigned int sz)
-{
-	advance_itstate(regs);
-	arm64_skip_faulting_instruction(regs, sz);
-}
-
 static void compat_cntfrq_read_handler(unsigned int esr, struct pt_regs *regs)
 {
 	int reg = (esr & ESR_ELx_CP15_32_ISS_RT_MASK) >> ESR_ELx_CP15_32_ISS_RT_SHIFT;
 
 	pt_regs_write_reg(regs, reg, arch_timer_get_rate());
-	arm64_compat_skip_faulting_instruction(regs, 4);
+	arm64_skip_faulting_instruction(regs, 4);
 }
 
 static const struct sys64_hook cp15_32_hooks[] = {
@@ -669,7 +680,7 @@ static void compat_cntvct_read_handler(unsigned int esr, struct pt_regs *regs)
 
 	pt_regs_write_reg(regs, rt, lower_32_bits(val));
 	pt_regs_write_reg(regs, rt2, upper_32_bits(val));
-	arm64_compat_skip_faulting_instruction(regs, 4);
+	arm64_skip_faulting_instruction(regs, 4);
 }
 
 static const struct sys64_hook cp15_64_hooks[] = {
@@ -690,7 +701,7 @@ void do_cp15instr(unsigned int esr, struct pt_regs *regs)
 		 * There is no T16 variant of a CP access, so we
 		 * always advance PC by 4 bytes.
 		 */
-		arm64_compat_skip_faulting_instruction(regs, 4);
+		arm64_skip_faulting_instruction(regs, 4);
 		return;
 	}
 
@@ -753,6 +764,7 @@ static const char *esr_class_str[] = {
 	[ESR_ELx_EC_CP10_ID]		= "CP10 MRC/VMRS",
 	[ESR_ELx_EC_PAC]		= "PAC",
 	[ESR_ELx_EC_CP14_64]		= "CP14 MCRR/MRRC",
+	[ESR_ELx_EC_BTI]		= "BTI",
 	[ESR_ELx_EC_ILL]		= "PSTATE.IL",
 	[ESR_ELx_EC_SVC32]		= "SVC (AArch32)",
 	[ESR_ELx_EC_HVC32]		= "HVC (AArch32)",
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 033a48f30dbb..f3eea5e20a41 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -33,20 +33,14 @@ extern char vdso_start[], vdso_end[];
 extern char vdso32_start[], vdso32_end[];
 #endif /* CONFIG_COMPAT_VDSO */
 
-/* vdso_lookup arch_index */
-enum arch_vdso_type {
-	ARM64_VDSO = 0,
+enum vdso_abi {
+	VDSO_ABI_AA64,
 #ifdef CONFIG_COMPAT_VDSO
-	ARM64_VDSO32 = 1,
+	VDSO_ABI_AA32,
 #endif /* CONFIG_COMPAT_VDSO */
 };
-#ifdef CONFIG_COMPAT_VDSO
-#define VDSO_TYPES		(ARM64_VDSO32 + 1)
-#else
-#define VDSO_TYPES		(ARM64_VDSO + 1)
-#endif /* CONFIG_COMPAT_VDSO */
 
-struct __vdso_abi {
+struct vdso_abi_info {
 	const char *name;
 	const char *vdso_code_start;
 	const char *vdso_code_end;
@@ -57,14 +51,14 @@ struct __vdso_abi {
 	struct vm_special_mapping *cm;
 };
 
-static struct __vdso_abi vdso_lookup[VDSO_TYPES] __ro_after_init = {
-	{
+static struct vdso_abi_info vdso_info[] __ro_after_init = {
+	[VDSO_ABI_AA64] = {
 		.name = "vdso",
 		.vdso_code_start = vdso_start,
 		.vdso_code_end = vdso_end,
 	},
 #ifdef CONFIG_COMPAT_VDSO
-	{
+	[VDSO_ABI_AA32] = {
 		.name = "vdso32",
 		.vdso_code_start = vdso32_start,
 		.vdso_code_end = vdso32_end,
@@ -81,13 +75,13 @@ static union {
 } vdso_data_store __page_aligned_data;
 struct vdso_data *vdso_data = vdso_data_store.data;
 
-static int __vdso_remap(enum arch_vdso_type arch_index,
+static int __vdso_remap(enum vdso_abi abi,
 			const struct vm_special_mapping *sm,
 			struct vm_area_struct *new_vma)
 {
 	unsigned long new_size = new_vma->vm_end - new_vma->vm_start;
-	unsigned long vdso_size = vdso_lookup[arch_index].vdso_code_end -
-				  vdso_lookup[arch_index].vdso_code_start;
+	unsigned long vdso_size = vdso_info[abi].vdso_code_end -
+				  vdso_info[abi].vdso_code_start;
 
 	if (vdso_size != new_size)
 		return -EINVAL;
@@ -97,24 +91,24 @@ static int __vdso_remap(enum arch_vdso_type arch_index,
 	return 0;
 }
 
-static int __vdso_init(enum arch_vdso_type arch_index)
+static int __vdso_init(enum vdso_abi abi)
 {
 	int i;
 	struct page **vdso_pagelist;
 	unsigned long pfn;
 
-	if (memcmp(vdso_lookup[arch_index].vdso_code_start, "\177ELF", 4)) {
+	if (memcmp(vdso_info[abi].vdso_code_start, "\177ELF", 4)) {
 		pr_err("vDSO is not a valid ELF object!\n");
 		return -EINVAL;
 	}
 
-	vdso_lookup[arch_index].vdso_pages = (
-			vdso_lookup[arch_index].vdso_code_end -
-			vdso_lookup[arch_index].vdso_code_start) >>
+	vdso_info[abi].vdso_pages = (
+			vdso_info[abi].vdso_code_end -
+			vdso_info[abi].vdso_code_start) >>
 			PAGE_SHIFT;
 
 	/* Allocate the vDSO pagelist, plus a page for the data. */
-	vdso_pagelist = kcalloc(vdso_lookup[arch_index].vdso_pages + 1,
+	vdso_pagelist = kcalloc(vdso_info[abi].vdso_pages + 1,
 				sizeof(struct page *),
 				GFP_KERNEL);
 	if (vdso_pagelist == NULL)
@@ -125,18 +119,18 @@ static int __vdso_init(enum arch_vdso_type arch_index)
 
 
 	/* Grab the vDSO code pages. */
-	pfn = sym_to_pfn(vdso_lookup[arch_index].vdso_code_start);
+	pfn = sym_to_pfn(vdso_info[abi].vdso_code_start);
 
-	for (i = 0; i < vdso_lookup[arch_index].vdso_pages; i++)
+	for (i = 0; i < vdso_info[abi].vdso_pages; i++)
 		vdso_pagelist[i + 1] = pfn_to_page(pfn + i);
 
-	vdso_lookup[arch_index].dm->pages = &vdso_pagelist[0];
-	vdso_lookup[arch_index].cm->pages = &vdso_pagelist[1];
+	vdso_info[abi].dm->pages = &vdso_pagelist[0];
+	vdso_info[abi].cm->pages = &vdso_pagelist[1];
 
 	return 0;
 }
 
-static int __setup_additional_pages(enum arch_vdso_type arch_index,
+static int __setup_additional_pages(enum vdso_abi abi,
 				    struct mm_struct *mm,
 				    struct linux_binprm *bprm,
 				    int uses_interp)
@@ -144,7 +138,7 @@ static int __setup_additional_pages(enum arch_vdso_type arch_index,
 	unsigned long vdso_base, vdso_text_len, vdso_mapping_len;
 	void *ret;
 
-	vdso_text_len = vdso_lookup[arch_index].vdso_pages << PAGE_SHIFT;
+	vdso_text_len = vdso_info[abi].vdso_pages << PAGE_SHIFT;
 	/* Be sure to map the data page */
 	vdso_mapping_len = vdso_text_len + PAGE_SIZE;
 
@@ -156,7 +150,7 @@ static int __setup_additional_pages(enum arch_vdso_type arch_index,
 
 	ret = _install_special_mapping(mm, vdso_base, PAGE_SIZE,
 				       VM_READ|VM_MAYREAD,
-				       vdso_lookup[arch_index].dm);
+				       vdso_info[abi].dm);
 	if (IS_ERR(ret))
 		goto up_fail;
 
@@ -165,7 +159,7 @@ static int __setup_additional_pages(enum arch_vdso_type arch_index,
 	ret = _install_special_mapping(mm, vdso_base, vdso_text_len,
 				       VM_READ|VM_EXEC|
 				       VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
-				       vdso_lookup[arch_index].cm);
+				       vdso_info[abi].cm);
 	if (IS_ERR(ret))
 		goto up_fail;
 
@@ -184,46 +178,42 @@ static int __setup_additional_pages(enum arch_vdso_type arch_index,
 static int aarch32_vdso_mremap(const struct vm_special_mapping *sm,
 		struct vm_area_struct *new_vma)
 {
-	return __vdso_remap(ARM64_VDSO32, sm, new_vma);
+	return __vdso_remap(VDSO_ABI_AA32, sm, new_vma);
 }
 #endif /* CONFIG_COMPAT_VDSO */
 
-/*
- * aarch32_vdso_pages:
- * 0 - kuser helpers
- * 1 - sigreturn code
- * or (CONFIG_COMPAT_VDSO):
- * 0 - kuser helpers
- * 1 - vdso data
- * 2 - vdso code
- */
-#define C_VECTORS	0
+enum aarch32_map {
+	AA32_MAP_VECTORS, /* kuser helpers */
 #ifdef CONFIG_COMPAT_VDSO
-#define C_VVAR		1
-#define C_VDSO		2
-#define C_PAGES		(C_VDSO + 1)
+	AA32_MAP_VVAR,
+	AA32_MAP_VDSO,
 #else
-#define C_SIGPAGE	1
-#define C_PAGES		(C_SIGPAGE + 1)
-#endif /* CONFIG_COMPAT_VDSO */
-static struct page *aarch32_vdso_pages[C_PAGES] __ro_after_init;
-static struct vm_special_mapping aarch32_vdso_spec[C_PAGES] = {
-	{
+	AA32_MAP_SIGPAGE
+#endif
+};
+
+static struct page *aarch32_vectors_page __ro_after_init;
+#ifndef CONFIG_COMPAT_VDSO
+static struct page *aarch32_sig_page __ro_after_init;
+#endif
+
+static struct vm_special_mapping aarch32_vdso_maps[] = {
+	[AA32_MAP_VECTORS] = {
 		.name	= "[vectors]", /* ABI */
-		.pages	= &aarch32_vdso_pages[C_VECTORS],
+		.pages	= &aarch32_vectors_page,
 	},
 #ifdef CONFIG_COMPAT_VDSO
-	{
+	[AA32_MAP_VVAR] = {
 		.name = "[vvar]",
 	},
-	{
+	[AA32_MAP_VDSO] = {
 		.name = "[vdso]",
 		.mremap = aarch32_vdso_mremap,
 	},
 #else
-	{
+	[AA32_MAP_SIGPAGE] = {
 		.name	= "[sigpage]", /* ABI */
-		.pages	= &aarch32_vdso_pages[C_SIGPAGE],
+		.pages	= &aarch32_sig_page,
 	},
 #endif /* CONFIG_COMPAT_VDSO */
 };
@@ -243,8 +233,8 @@ static int aarch32_alloc_kuser_vdso_page(void)
 
 	memcpy((void *)(vdso_page + 0x1000 - kuser_sz), __kuser_helper_start,
 	       kuser_sz);
-	aarch32_vdso_pages[C_VECTORS] = virt_to_page(vdso_page);
-	flush_dcache_page(aarch32_vdso_pages[C_VECTORS]);
+	aarch32_vectors_page = virt_to_page(vdso_page);
+	flush_dcache_page(aarch32_vectors_page);
 	return 0;
 }
 
@@ -253,10 +243,10 @@ static int __aarch32_alloc_vdso_pages(void)
 {
 	int ret;
 
-	vdso_lookup[ARM64_VDSO32].dm = &aarch32_vdso_spec[C_VVAR];
-	vdso_lookup[ARM64_VDSO32].cm = &aarch32_vdso_spec[C_VDSO];
+	vdso_info[VDSO_ABI_AA32].dm = &aarch32_vdso_maps[AA32_MAP_VVAR];
+	vdso_info[VDSO_ABI_AA32].cm = &aarch32_vdso_maps[AA32_MAP_VDSO];
 
-	ret = __vdso_init(ARM64_VDSO32);
+	ret = __vdso_init(VDSO_ABI_AA32);
 	if (ret)
 		return ret;
 
@@ -275,8 +265,8 @@ static int __aarch32_alloc_vdso_pages(void)
 		return -ENOMEM;
 
 	memcpy((void *)sigpage, __aarch32_sigret_code_start, sigret_sz);
-	aarch32_vdso_pages[C_SIGPAGE] = virt_to_page(sigpage);
-	flush_dcache_page(aarch32_vdso_pages[C_SIGPAGE]);
+	aarch32_sig_page = virt_to_page(sigpage);
+	flush_dcache_page(aarch32_sig_page);
 
 	ret = aarch32_alloc_kuser_vdso_page();
 	if (ret)
@@ -306,7 +296,7 @@ static int aarch32_kuser_helpers_setup(struct mm_struct *mm)
 	ret = _install_special_mapping(mm, AARCH32_VECTORS_BASE, PAGE_SIZE,
 				       VM_READ | VM_EXEC |
 				       VM_MAYREAD | VM_MAYEXEC,
-				       &aarch32_vdso_spec[C_VECTORS]);
+				       &aarch32_vdso_maps[AA32_MAP_VECTORS]);
 
 	return PTR_ERR_OR_ZERO(ret);
 }
@@ -330,7 +320,7 @@ static int aarch32_sigreturn_setup(struct mm_struct *mm)
 	ret = _install_special_mapping(mm, addr, PAGE_SIZE,
 				       VM_READ | VM_EXEC | VM_MAYREAD |
 				       VM_MAYWRITE | VM_MAYEXEC,
-				       &aarch32_vdso_spec[C_SIGPAGE]);
+				       &aarch32_vdso_maps[AA32_MAP_SIGPAGE]);
 	if (IS_ERR(ret))
 		goto out;
 
@@ -354,7 +344,7 @@ int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 		goto out;
 
 #ifdef CONFIG_COMPAT_VDSO
-	ret = __setup_additional_pages(ARM64_VDSO32,
+	ret = __setup_additional_pages(VDSO_ABI_AA32,
 				       mm,
 				       bprm,
 				       uses_interp);
@@ -371,22 +361,19 @@ int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 static int vdso_mremap(const struct vm_special_mapping *sm,
 		struct vm_area_struct *new_vma)
 {
-	return __vdso_remap(ARM64_VDSO, sm, new_vma);
+	return __vdso_remap(VDSO_ABI_AA64, sm, new_vma);
 }
 
-/*
- * aarch64_vdso_pages:
- * 0 - vvar
- * 1 - vdso
- */
-#define A_VVAR		0
-#define A_VDSO		1
-#define A_PAGES		(A_VDSO + 1)
-static struct vm_special_mapping vdso_spec[A_PAGES] __ro_after_init = {
-	{
+enum aarch64_map {
+	AA64_MAP_VVAR,
+	AA64_MAP_VDSO,
+};
+
+static struct vm_special_mapping aarch64_vdso_maps[] __ro_after_init = {
+	[AA64_MAP_VVAR] = {
 		.name	= "[vvar]",
 	},
-	{
+	[AA64_MAP_VDSO] = {
 		.name	= "[vdso]",
 		.mremap = vdso_mremap,
 	},
@@ -394,10 +381,10 @@ static struct vm_special_mapping vdso_spec[A_PAGES] __ro_after_init = {
 
 static int __init vdso_init(void)
 {
-	vdso_lookup[ARM64_VDSO].dm = &vdso_spec[A_VVAR];
-	vdso_lookup[ARM64_VDSO].cm = &vdso_spec[A_VDSO];
+	vdso_info[VDSO_ABI_AA64].dm = &aarch64_vdso_maps[AA64_MAP_VVAR];
+	vdso_info[VDSO_ABI_AA64].cm = &aarch64_vdso_maps[AA64_MAP_VDSO];
 
-	return __vdso_init(ARM64_VDSO);
+	return __vdso_init(VDSO_ABI_AA64);
 }
 arch_initcall(vdso_init);
 
@@ -410,7 +397,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm,
 	if (down_write_killable(&mm->mmap_sem))
 		return -EINTR;
 
-	ret = __setup_additional_pages(ARM64_VDSO,
+	ret = __setup_additional_pages(VDSO_ABI_AA64,
 				       mm,
 				       bprm,
 				       uses_interp);
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index dd2514bb1511..abf61c96edbc 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -17,14 +17,16 @@ obj-vdso := vgettimeofday.o note.o sigreturn.o
 targets := $(obj-vdso) vdso.so vdso.so.dbg
 obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
 
+# -Bsymbolic has been added for consistency with arm, the compat vDSO and
+# potential future proofing if we end up with internal calls to the exported
+# routines, as x86 does (see 6f121e548f83 ("x86, vdso: Reimplement vdso.so
+# preparation in build-time C")).
 ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \
-		--build-id -n -T
+		-Bsymbolic --build-id -n -T
 
 ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18
 ccflags-y += -DDISABLE_BRANCH_PROFILING
 
-VDSO_LDFLAGS := -Bsymbolic
-
 CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os
 KBUILD_CFLAGS			+= $(DISABLE_LTO)
 KASAN_SANITIZE			:= n
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index 497f9675071d..3be632177631 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -17,10 +17,6 @@
 
 #include "image.h"
 
-/* .exit.text needed in case of alternative patching */
-#define ARM_EXIT_KEEP(x)	x
-#define ARM_EXIT_DISCARD(x)
-
 OUTPUT_ARCH(aarch64)
 ENTRY(_text)
 
@@ -72,8 +68,8 @@ jiffies = jiffies_64;
 
 /*
  * The size of the PE/COFF section that covers the kernel image, which
- * runs from stext to _edata, must be a round multiple of the PE/COFF
- * FileAlignment, which we set to its minimum value of 0x200. 'stext'
+ * runs from _stext to _edata, must be a round multiple of the PE/COFF
+ * FileAlignment, which we set to its minimum value of 0x200. '_stext'
  * itself is 4 KB aligned, so padding out _edata to a 0x200 aligned
  * boundary should be sufficient.
  */
@@ -95,8 +91,6 @@ SECTIONS
 	 * order of matching.
 	 */
 	/DISCARD/ : {
-		ARM_EXIT_DISCARD(EXIT_TEXT)
-		ARM_EXIT_DISCARD(EXIT_DATA)
 		EXIT_CALL
 		*(.discard)
 		*(.discard.*)
@@ -139,6 +133,7 @@ SECTIONS
 
 	idmap_pg_dir = .;
 	. += IDMAP_DIR_SIZE;
+	idmap_pg_end = .;
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 	tramp_pg_dir = .;
@@ -161,7 +156,7 @@ SECTIONS
 
 	__exittext_begin = .;
 	.exit.text : {
-		ARM_EXIT_KEEP(EXIT_TEXT)
+		EXIT_TEXT
 	}
 	__exittext_end = .;
 
@@ -175,7 +170,7 @@ SECTIONS
 		*(.altinstr_replacement)
 	}
 
-	. = ALIGN(PAGE_SIZE);
+	. = ALIGN(SEGMENT_ALIGN);
 	__inittext_end = .;
 	__initdata_begin = .;
 
@@ -188,7 +183,7 @@ SECTIONS
 		*(.init.rodata.* .init.bss)	/* from the EFI stub */
 	}
 	.exit.data : {
-		ARM_EXIT_KEEP(EXIT_DATA)
+		EXIT_DATA
 	}
 
 	PERCPU_SECTION(L1_CACHE_BYTES)
@@ -246,6 +241,7 @@ SECTIONS
 	. += INIT_DIR_SIZE;
 	init_pg_end = .;
 
+	. = ALIGN(SEGMENT_ALIGN);
 	__pecoff_data_size = ABSOLUTE(. - __initdata_begin);
 	_end = .;
 
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index 23ebe51410f0..8417b200bec9 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -29,20 +29,17 @@
 
 #include "trace.h"
 
-#define VM_STAT(x) { #x, offsetof(struct kvm, stat.x), KVM_STAT_VM }
-#define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU }
-
 struct kvm_stats_debugfs_item debugfs_entries[] = {
-	VCPU_STAT(halt_successful_poll),
-	VCPU_STAT(halt_attempted_poll),
-	VCPU_STAT(halt_poll_invalid),
-	VCPU_STAT(halt_wakeup),
-	VCPU_STAT(hvc_exit_stat),
-	VCPU_STAT(wfe_exit_stat),
-	VCPU_STAT(wfi_exit_stat),
-	VCPU_STAT(mmio_exit_user),
-	VCPU_STAT(mmio_exit_kernel),
-	VCPU_STAT(exits),
+	VCPU_STAT("halt_successful_poll", halt_successful_poll),
+	VCPU_STAT("halt_attempted_poll", halt_attempted_poll),
+	VCPU_STAT("halt_poll_invalid", halt_poll_invalid),
+	VCPU_STAT("halt_wakeup", halt_wakeup),
+	VCPU_STAT("hvc_exit_stat", hvc_exit_stat),
+	VCPU_STAT("wfe_exit_stat", wfe_exit_stat),
+	VCPU_STAT("wfi_exit_stat", wfi_exit_stat),
+	VCPU_STAT("mmio_exit_user", mmio_exit_user),
+	VCPU_STAT("mmio_exit_kernel", mmio_exit_kernel),
+	VCPU_STAT("exits", exits),
 	{ NULL }
 };
 
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index 30b7ea680f66..102e5c4e01a0 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -46,14 +46,6 @@ static const struct kvm_regs default_regs_reset32 = {
 			PSR_AA32_I_BIT | PSR_AA32_F_BIT),
 };
 
-static bool cpu_has_32bit_el1(void)
-{
-	u64 pfr0;
-
-	pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
-	return !!(pfr0 & 0x20);
-}
-
 /**
  * kvm_arch_vm_ioctl_check_extension
  *
@@ -66,7 +58,7 @@ int kvm_arch_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 
 	switch (ext) {
 	case KVM_CAP_ARM_EL1_32BIT:
-		r = cpu_has_32bit_el1();
+		r = cpus_have_const_cap(ARM64_HAS_32BIT_EL1);
 		break;
 	case KVM_CAP_GUEST_DEBUG_HW_BPS:
 		r = get_num_brps();
@@ -288,7 +280,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	switch (vcpu->arch.target) {
 	default:
 		if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features)) {
-			if (!cpu_has_32bit_el1())
+			if (!cpus_have_const_cap(ARM64_HAS_32BIT_EL1))
 				goto out;
 			cpu_reset = &default_regs_reset32;
 		} else {
diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
index 8e25e89ad01f..0f8a3a9e3795 100644
--- a/arch/arm64/lib/copy_from_user.S
+++ b/arch/arm64/lib/copy_from_user.S
@@ -20,36 +20,36 @@
  *	x0 - bytes not copied
  */
 
-	.macro ldrb1 ptr, regB, val
-	uao_user_alternative 9998f, ldrb, ldtrb, \ptr, \regB, \val
+	.macro ldrb1 reg, ptr, val
+	uao_user_alternative 9998f, ldrb, ldtrb, \reg, \ptr, \val
 	.endm
 
-	.macro strb1 ptr, regB, val
-	strb \ptr, [\regB], \val
+	.macro strb1 reg, ptr, val
+	strb \reg, [\ptr], \val
 	.endm
 
-	.macro ldrh1 ptr, regB, val
-	uao_user_alternative 9998f, ldrh, ldtrh, \ptr, \regB, \val
+	.macro ldrh1 reg, ptr, val
+	uao_user_alternative 9998f, ldrh, ldtrh, \reg, \ptr, \val
 	.endm
 
-	.macro strh1 ptr, regB, val
-	strh \ptr, [\regB], \val
+	.macro strh1 reg, ptr, val
+	strh \reg, [\ptr], \val
 	.endm
 
-	.macro ldr1 ptr, regB, val
-	uao_user_alternative 9998f, ldr, ldtr, \ptr, \regB, \val
+	.macro ldr1 reg, ptr, val
+	uao_user_alternative 9998f, ldr, ldtr, \reg, \ptr, \val
 	.endm
 
-	.macro str1 ptr, regB, val
-	str \ptr, [\regB], \val
+	.macro str1 reg, ptr, val
+	str \reg, [\ptr], \val
 	.endm
 
-	.macro ldp1 ptr, regB, regC, val
-	uao_ldp 9998f, \ptr, \regB, \regC, \val
+	.macro ldp1 reg1, reg2, ptr, val
+	uao_ldp 9998f, \reg1, \reg2, \ptr, \val
 	.endm
 
-	.macro stp1 ptr, regB, regC, val
-	stp \ptr, \regB, [\regC], \val
+	.macro stp1 reg1, reg2, ptr, val
+	stp \reg1, \reg2, [\ptr], \val
 	.endm
 
 end	.req	x5
diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S
index 667139013ed1..80e37ada0ee1 100644
--- a/arch/arm64/lib/copy_in_user.S
+++ b/arch/arm64/lib/copy_in_user.S
@@ -21,36 +21,36 @@
  * Returns:
  *	x0 - bytes not copied
  */
-	.macro ldrb1 ptr, regB, val
-	uao_user_alternative 9998f, ldrb, ldtrb, \ptr, \regB, \val
+	.macro ldrb1 reg, ptr, val
+	uao_user_alternative 9998f, ldrb, ldtrb, \reg, \ptr, \val
 	.endm
 
-	.macro strb1 ptr, regB, val
-	uao_user_alternative 9998f, strb, sttrb, \ptr, \regB, \val
+	.macro strb1 reg, ptr, val
+	uao_user_alternative 9998f, strb, sttrb, \reg, \ptr, \val
 	.endm
 
-	.macro ldrh1 ptr, regB, val
-	uao_user_alternative 9998f, ldrh, ldtrh, \ptr, \regB, \val
+	.macro ldrh1 reg, ptr, val
+	uao_user_alternative 9998f, ldrh, ldtrh, \reg, \ptr, \val
 	.endm
 
-	.macro strh1 ptr, regB, val
-	uao_user_alternative 9998f, strh, sttrh, \ptr, \regB, \val
+	.macro strh1 reg, ptr, val
+	uao_user_alternative 9998f, strh, sttrh, \reg, \ptr, \val
 	.endm
 
-	.macro ldr1 ptr, regB, val
-	uao_user_alternative 9998f, ldr, ldtr, \ptr, \regB, \val
+	.macro ldr1 reg, ptr, val
+	uao_user_alternative 9998f, ldr, ldtr, \reg, \ptr, \val
 	.endm
 
-	.macro str1 ptr, regB, val
-	uao_user_alternative 9998f, str, sttr, \ptr, \regB, \val
+	.macro str1 reg, ptr, val
+	uao_user_alternative 9998f, str, sttr, \reg, \ptr, \val
 	.endm
 
-	.macro ldp1 ptr, regB, regC, val
-	uao_ldp 9998f, \ptr, \regB, \regC, \val
+	.macro ldp1 reg1, reg2, ptr, val
+	uao_ldp 9998f, \reg1, \reg2, \ptr, \val
 	.endm
 
-	.macro stp1 ptr, regB, regC, val
-	uao_stp 9998f, \ptr, \regB, \regC, \val
+	.macro stp1 reg1, reg2, ptr, val
+	uao_stp 9998f, \reg1, \reg2, \ptr, \val
 	.endm
 
 end	.req	x5
diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
index 1a104d0089f3..4ec59704b8f2 100644
--- a/arch/arm64/lib/copy_to_user.S
+++ b/arch/arm64/lib/copy_to_user.S
@@ -19,36 +19,36 @@
  * Returns:
  *	x0 - bytes not copied
  */
-	.macro ldrb1 ptr, regB, val
-	ldrb  \ptr, [\regB], \val
+	.macro ldrb1 reg, ptr, val
+	ldrb  \reg, [\ptr], \val
 	.endm
 
-	.macro strb1 ptr, regB, val
-	uao_user_alternative 9998f, strb, sttrb, \ptr, \regB, \val
+	.macro strb1 reg, ptr, val
+	uao_user_alternative 9998f, strb, sttrb, \reg, \ptr, \val
 	.endm
 
-	.macro ldrh1 ptr, regB, val
-	ldrh  \ptr, [\regB], \val
+	.macro ldrh1 reg, ptr, val
+	ldrh  \reg, [\ptr], \val
 	.endm
 
-	.macro strh1 ptr, regB, val
-	uao_user_alternative 9998f, strh, sttrh, \ptr, \regB, \val
+	.macro strh1 reg, ptr, val
+	uao_user_alternative 9998f, strh, sttrh, \reg, \ptr, \val
 	.endm
 
-	.macro ldr1 ptr, regB, val
-	ldr \ptr, [\regB], \val
+	.macro ldr1 reg, ptr, val
+	ldr \reg, [\ptr], \val
 	.endm
 
-	.macro str1 ptr, regB, val
-	uao_user_alternative 9998f, str, sttr, \ptr, \regB, \val
+	.macro str1 reg, ptr, val
+	uao_user_alternative 9998f, str, sttr, \reg, \ptr, \val
 	.endm
 
-	.macro ldp1 ptr, regB, regC, val
-	ldp \ptr, \regB, [\regC], \val
+	.macro ldp1 reg1, reg2, ptr, val
+	ldp \reg1, \reg2, [\ptr], \val
 	.endm
 
-	.macro stp1 ptr, regB, regC, val
-	uao_stp 9998f, \ptr, \regB, \regC, \val
+	.macro stp1 reg1, reg2, ptr, val
+	uao_stp 9998f, \reg1, \reg2, \ptr, \val
 	.endm
 
 end	.req	x5
diff --git a/arch/arm64/lib/crc32.S b/arch/arm64/lib/crc32.S
index 243e107e9896..0f9e10ecda23 100644
--- a/arch/arm64/lib/crc32.S
+++ b/arch/arm64/lib/crc32.S
@@ -9,7 +9,7 @@
 #include <asm/alternative.h>
 #include <asm/assembler.h>
 
-	.cpu		generic+crc
+	.arch		armv8-a+crc
 
 	.macro		__crc32, c
 	cmp		x2, #16
diff --git a/arch/arm64/lib/memcpy.S b/arch/arm64/lib/memcpy.S
index 9f382adfa88a..e0bf83d556f2 100644
--- a/arch/arm64/lib/memcpy.S
+++ b/arch/arm64/lib/memcpy.S
@@ -24,36 +24,36 @@
  * Returns:
  *	x0 - dest
  */
-	.macro ldrb1 ptr, regB, val
-	ldrb  \ptr, [\regB], \val
+	.macro ldrb1 reg, ptr, val
+	ldrb  \reg, [\ptr], \val
 	.endm
 
-	.macro strb1 ptr, regB, val
-	strb \ptr, [\regB], \val
+	.macro strb1 reg, ptr, val
+	strb \reg, [\ptr], \val
 	.endm
 
-	.macro ldrh1 ptr, regB, val
-	ldrh  \ptr, [\regB], \val
+	.macro ldrh1 reg, ptr, val
+	ldrh  \reg, [\ptr], \val
 	.endm
 
-	.macro strh1 ptr, regB, val
-	strh \ptr, [\regB], \val
+	.macro strh1 reg, ptr, val
+	strh \reg, [\ptr], \val
 	.endm
 
-	.macro ldr1 ptr, regB, val
-	ldr \ptr, [\regB], \val
+	.macro ldr1 reg, ptr, val
+	ldr \reg, [\ptr], \val
 	.endm
 
-	.macro str1 ptr, regB, val
-	str \ptr, [\regB], \val
+	.macro str1 reg, ptr, val
+	str \reg, [\ptr], \val
 	.endm
 
-	.macro ldp1 ptr, regB, regC, val
-	ldp \ptr, \regB, [\regC], \val
+	.macro ldp1 reg1, reg2, ptr, val
+	ldp \reg1, \reg2, [\ptr], \val
 	.endm
 
-	.macro stp1 ptr, regB, regC, val
-	stp \ptr, \regB, [\regC], \val
+	.macro stp1 reg1, reg2, ptr, val
+	stp \reg1, \reg2, [\ptr], \val
 	.endm
 
 	.weak memcpy
diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c
index 860c00ec8bd3..78163b7a7dde 100644
--- a/arch/arm64/mm/dump.c
+++ b/arch/arm64/mm/dump.c
@@ -145,6 +145,11 @@ static const struct prot_bits pte_bits[] = {
 		.val	= PTE_UXN,
 		.set	= "UXN",
 		.clear	= "   ",
+	}, {
+		.mask	= PTE_GP,
+		.val	= PTE_GP,
+		.set	= "GP",
+		.clear	= "  ",
 	}, {
 		.mask	= PTE_ATTRINDX_MASK,
 		.val	= PTE_ATTRINDX(MT_DEVICE_nGnRnE),
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index c9cedc0432d2..a529877daa13 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -145,6 +145,7 @@ static void show_pte(unsigned long addr)
 	pr_alert("[%016lx] pgd=%016llx", addr, pgd_val(pgd));
 
 	do {
+		p4d_t *p4dp, p4d;
 		pud_t *pudp, pud;
 		pmd_t *pmdp, pmd;
 		pte_t *ptep, pte;
@@ -152,7 +153,13 @@ static void show_pte(unsigned long addr)
 		if (pgd_none(pgd) || pgd_bad(pgd))
 			break;
 
-		pudp = pud_offset(pgdp, addr);
+		p4dp = p4d_offset(pgdp, addr);
+		p4d = READ_ONCE(*p4dp);
+		pr_cont(", p4d=%016llx", p4d_val(p4d));
+		if (p4d_none(p4d) || p4d_bad(p4d))
+			break;
+
+		pudp = pud_offset(p4dp, addr);
 		pud = READ_ONCE(*pudp);
 		pr_cont(", pud=%016llx", pud_val(pud));
 		if (pud_none(pud) || pud_bad(pud))
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index bbeb6a5a6ba6..bed6dc7c4276 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -67,11 +67,13 @@ static int find_num_contig(struct mm_struct *mm, unsigned long addr,
 			   pte_t *ptep, size_t *pgsize)
 {
 	pgd_t *pgdp = pgd_offset(mm, addr);
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 
 	*pgsize = PAGE_SIZE;
-	pudp = pud_offset(pgdp, addr);
+	p4dp = p4d_offset(pgdp, addr);
+	pudp = pud_offset(p4dp, addr);
 	pmdp = pmd_offset(pudp, addr);
 	if ((pte_t *)pmdp == ptep) {
 		*pgsize = PMD_SIZE;
@@ -217,12 +219,14 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 		      unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep = NULL;
 
 	pgdp = pgd_offset(mm, addr);
-	pudp = pud_alloc(mm, pgdp, addr);
+	p4dp = p4d_offset(pgdp, addr);
+	pudp = pud_alloc(mm, p4dp, addr);
 	if (!pudp)
 		return NULL;
 
@@ -259,6 +263,7 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 		       unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp, pud;
 	pmd_t *pmdp, pmd;
 
@@ -266,7 +271,11 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 	if (!pgd_present(READ_ONCE(*pgdp)))
 		return NULL;
 
-	pudp = pud_offset(pgdp, addr);
+	p4dp = p4d_offset(pgdp, addr);
+	if (!p4d_present(READ_ONCE(*p4dp)))
+		return NULL;
+
+	pudp = pud_offset(p4dp, addr);
 	pud = READ_ONCE(*pudp);
 	if (sz != PUD_SIZE && pud_none(pud))
 		return NULL;
@@ -441,44 +450,30 @@ void huge_ptep_clear_flush(struct vm_area_struct *vma,
 	clear_flush(vma->vm_mm, addr, ptep, pgsize, ncontig);
 }
 
-static void __init add_huge_page_size(unsigned long size)
-{
-	if (size_to_hstate(size))
-		return;
-
-	hugetlb_add_hstate(ilog2(size) - PAGE_SHIFT);
-}
-
 static int __init hugetlbpage_init(void)
 {
 #ifdef CONFIG_ARM64_4K_PAGES
-	add_huge_page_size(PUD_SIZE);
+	hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
 #endif
-	add_huge_page_size(CONT_PMD_SIZE);
-	add_huge_page_size(PMD_SIZE);
-	add_huge_page_size(CONT_PTE_SIZE);
+	hugetlb_add_hstate((CONT_PMD_SHIFT + PMD_SHIFT) - PAGE_SHIFT);
+	hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
+	hugetlb_add_hstate((CONT_PTE_SHIFT + PAGE_SHIFT) - PAGE_SHIFT);
 
 	return 0;
 }
 arch_initcall(hugetlbpage_init);
 
-static __init int setup_hugepagesz(char *opt)
+bool __init arch_hugetlb_valid_size(unsigned long size)
 {
-	unsigned long ps = memparse(opt, &opt);
-
-	switch (ps) {
+	switch (size) {
 #ifdef CONFIG_ARM64_4K_PAGES
 	case PUD_SIZE:
 #endif
 	case CONT_PMD_SIZE:
 	case PMD_SIZE:
 	case CONT_PTE_SIZE:
-		add_huge_page_size(ps);
-		return 1;
+		return true;
 	}
 
-	hugetlb_bad_size();
-	pr_err("hugepagesz: Unsupported page size %lu K\n", ps >> 10);
-	return 0;
+	return false;
 }
-__setup("hugepagesz=", setup_hugepagesz);
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index e42727e3568e..d54ad2250dce 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -192,8 +192,6 @@ static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
 	return min(offset + (1ULL << zone_bits), memblock_end_of_DRAM());
 }
 
-#ifdef CONFIG_NUMA
-
 static void __init zone_sizes_init(unsigned long min, unsigned long max)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES]  = {0};
@@ -206,61 +204,9 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 #endif
 	max_zone_pfns[ZONE_NORMAL] = max;
 
-	free_area_init_nodes(max_zone_pfns);
-}
-
-#else
-
-static void __init zone_sizes_init(unsigned long min, unsigned long max)
-{
-	struct memblock_region *reg;
-	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	unsigned long __maybe_unused max_dma, max_dma32;
-
-	memset(zone_size, 0, sizeof(zone_size));
-
-	max_dma = max_dma32 = min;
-#ifdef CONFIG_ZONE_DMA
-	max_dma = max_dma32 = PFN_DOWN(arm64_dma_phys_limit);
-	zone_size[ZONE_DMA] = max_dma - min;
-#endif
-#ifdef CONFIG_ZONE_DMA32
-	max_dma32 = PFN_DOWN(arm64_dma32_phys_limit);
-	zone_size[ZONE_DMA32] = max_dma32 - max_dma;
-#endif
-	zone_size[ZONE_NORMAL] = max - max_dma32;
-
-	memcpy(zhole_size, zone_size, sizeof(zhole_size));
-
-	for_each_memblock(memory, reg) {
-		unsigned long start = memblock_region_memory_base_pfn(reg);
-		unsigned long end = memblock_region_memory_end_pfn(reg);
-
-#ifdef CONFIG_ZONE_DMA
-		if (start >= min && start < max_dma) {
-			unsigned long dma_end = min(end, max_dma);
-			zhole_size[ZONE_DMA] -= dma_end - start;
-			start = dma_end;
-		}
-#endif
-#ifdef CONFIG_ZONE_DMA32
-		if (start >= max_dma && start < max_dma32) {
-			unsigned long dma32_end = min(end, max_dma32);
-			zhole_size[ZONE_DMA32] -= dma32_end - start;
-			start = dma32_end;
-		}
-#endif
-		if (start >= max_dma32 && start < max) {
-			unsigned long normal_end = min(end, max);
-			zhole_size[ZONE_NORMAL] -= normal_end - start;
-		}
-	}
-
-	free_area_init_node(0, zone_size, min, zhole_size);
+	free_area_init(max_zone_pfns);
 }
 
-#endif /* CONFIG_NUMA */
-
 int pfn_valid(unsigned long pfn)
 {
 	phys_addr_t addr = pfn << PAGE_SHIFT;
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index f87a32484ea8..2339811f317b 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -84,17 +84,17 @@ static pmd_t *__init kasan_pmd_offset(pud_t *pudp, unsigned long addr, int node,
 	return early ? pmd_offset_kimg(pudp, addr) : pmd_offset(pudp, addr);
 }
 
-static pud_t *__init kasan_pud_offset(pgd_t *pgdp, unsigned long addr, int node,
+static pud_t *__init kasan_pud_offset(p4d_t *p4dp, unsigned long addr, int node,
 				      bool early)
 {
-	if (pgd_none(READ_ONCE(*pgdp))) {
+	if (p4d_none(READ_ONCE(*p4dp))) {
 		phys_addr_t pud_phys = early ?
 				__pa_symbol(kasan_early_shadow_pud)
 					: kasan_alloc_zeroed_page(node);
-		__pgd_populate(pgdp, pud_phys, PMD_TYPE_TABLE);
+		__p4d_populate(p4dp, pud_phys, PMD_TYPE_TABLE);
 	}
 
-	return early ? pud_offset_kimg(pgdp, addr) : pud_offset(pgdp, addr);
+	return early ? pud_offset_kimg(p4dp, addr) : pud_offset(p4dp, addr);
 }
 
 static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr,
@@ -126,11 +126,11 @@ static void __init kasan_pmd_populate(pud_t *pudp, unsigned long addr,
 	} while (pmdp++, addr = next, addr != end && pmd_none(READ_ONCE(*pmdp)));
 }
 
-static void __init kasan_pud_populate(pgd_t *pgdp, unsigned long addr,
+static void __init kasan_pud_populate(p4d_t *p4dp, unsigned long addr,
 				      unsigned long end, int node, bool early)
 {
 	unsigned long next;
-	pud_t *pudp = kasan_pud_offset(pgdp, addr, node, early);
+	pud_t *pudp = kasan_pud_offset(p4dp, addr, node, early);
 
 	do {
 		next = pud_addr_end(addr, end);
@@ -138,6 +138,18 @@ static void __init kasan_pud_populate(pgd_t *pgdp, unsigned long addr,
 	} while (pudp++, addr = next, addr != end && pud_none(READ_ONCE(*pudp)));
 }
 
+static void __init kasan_p4d_populate(pgd_t *pgdp, unsigned long addr,
+				      unsigned long end, int node, bool early)
+{
+	unsigned long next;
+	p4d_t *p4dp = p4d_offset(pgdp, addr);
+
+	do {
+		next = p4d_addr_end(addr, end);
+		kasan_pud_populate(p4dp, addr, next, node, early);
+	} while (p4dp++, addr = next, addr != end);
+}
+
 static void __init kasan_pgd_populate(unsigned long addr, unsigned long end,
 				      int node, bool early)
 {
@@ -147,7 +159,7 @@ static void __init kasan_pgd_populate(unsigned long addr, unsigned long end,
 	pgdp = pgd_offset_k(addr);
 	do {
 		next = pgd_addr_end(addr, end);
-		kasan_pud_populate(pgdp, addr, next, node, early);
+		kasan_p4d_populate(pgdp, addr, next, node, early);
 	} while (pgdp++, addr = next, addr != end);
 }
 
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index a374e4f51a62..c4c2e36b80ab 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -290,18 +290,19 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
 {
 	unsigned long next;
 	pud_t *pudp;
-	pgd_t pgd = READ_ONCE(*pgdp);
+	p4d_t *p4dp = p4d_offset(pgdp, addr);
+	p4d_t p4d = READ_ONCE(*p4dp);
 
-	if (pgd_none(pgd)) {
+	if (p4d_none(p4d)) {
 		phys_addr_t pud_phys;
 		BUG_ON(!pgtable_alloc);
 		pud_phys = pgtable_alloc(PUD_SHIFT);
-		__pgd_populate(pgdp, pud_phys, PUD_TYPE_TABLE);
-		pgd = READ_ONCE(*pgdp);
+		__p4d_populate(p4dp, pud_phys, PUD_TYPE_TABLE);
+		p4d = READ_ONCE(*p4dp);
 	}
-	BUG_ON(pgd_bad(pgd));
+	BUG_ON(p4d_bad(p4d));
 
-	pudp = pud_set_fixmap_offset(pgdp, addr);
+	pudp = pud_set_fixmap_offset(p4dp, addr);
 	do {
 		pud_t old_pud = READ_ONCE(*pudp);
 
@@ -648,6 +649,7 @@ static void __init map_kernel(pgd_t *pgdp)
 			READ_ONCE(*pgd_offset_k(FIXADDR_START)));
 	} else if (CONFIG_PGTABLE_LEVELS > 3) {
 		pgd_t *bm_pgdp;
+		p4d_t *bm_p4dp;
 		pud_t *bm_pudp;
 		/*
 		 * The fixmap shares its top level pgd entry with the kernel
@@ -657,7 +659,8 @@ static void __init map_kernel(pgd_t *pgdp)
 		 */
 		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
 		bm_pgdp = pgd_offset_raw(pgdp, FIXADDR_START);
-		bm_pudp = pud_set_fixmap_offset(bm_pgdp, FIXADDR_START);
+		bm_p4dp = p4d_offset(bm_pgdp, FIXADDR_START);
+		bm_pudp = pud_set_fixmap_offset(bm_p4dp, FIXADDR_START);
 		pud_populate(&init_mm, bm_pudp, lm_alias(bm_pmd));
 		pud_clear_fixmap();
 	} else {
@@ -691,6 +694,7 @@ void __init paging_init(void)
 int kern_addr_valid(unsigned long addr)
 {
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp, pud;
 	pmd_t *pmdp, pmd;
 	pte_t *ptep, pte;
@@ -702,7 +706,11 @@ int kern_addr_valid(unsigned long addr)
 	if (pgd_none(READ_ONCE(*pgdp)))
 		return 0;
 
-	pudp = pud_offset(pgdp, addr);
+	p4dp = p4d_offset(pgdp, addr);
+	if (p4d_none(READ_ONCE(*p4dp)))
+		return 0;
+
+	pudp = pud_offset(p4dp, addr);
 	pud = READ_ONCE(*pudp);
 	if (pud_none(pud))
 		return 0;
@@ -1045,6 +1053,7 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
 	unsigned long addr = start;
 	unsigned long next;
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 
@@ -1055,7 +1064,11 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
 		if (!pgdp)
 			return -ENOMEM;
 
-		pudp = vmemmap_pud_populate(pgdp, addr, node);
+		p4dp = vmemmap_p4d_populate(pgdp, addr, node);
+		if (!p4dp)
+			return -ENOMEM;
+
+		pudp = vmemmap_pud_populate(p4dp, addr, node);
 		if (!pudp)
 			return -ENOMEM;
 
@@ -1090,11 +1103,12 @@ void vmemmap_free(unsigned long start, unsigned long end,
 static inline pud_t * fixmap_pud(unsigned long addr)
 {
 	pgd_t *pgdp = pgd_offset_k(addr);
-	pgd_t pgd = READ_ONCE(*pgdp);
+	p4d_t *p4dp = p4d_offset(pgdp, addr);
+	p4d_t p4d = READ_ONCE(*p4dp);
 
-	BUG_ON(pgd_none(pgd) || pgd_bad(pgd));
+	BUG_ON(p4d_none(p4d) || p4d_bad(p4d));
 
-	return pud_offset_kimg(pgdp, addr);
+	return pud_offset_kimg(p4dp, addr);
 }
 
 static inline pmd_t * fixmap_pmd(unsigned long addr)
@@ -1120,25 +1134,27 @@ static inline pte_t * fixmap_pte(unsigned long addr)
  */
 void __init early_fixmap_init(void)
 {
-	pgd_t *pgdp, pgd;
+	pgd_t *pgdp;
+	p4d_t *p4dp, p4d;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	unsigned long addr = FIXADDR_START;
 
 	pgdp = pgd_offset_k(addr);
-	pgd = READ_ONCE(*pgdp);
+	p4dp = p4d_offset(pgdp, addr);
+	p4d = READ_ONCE(*p4dp);
 	if (CONFIG_PGTABLE_LEVELS > 3 &&
-	    !(pgd_none(pgd) || pgd_page_paddr(pgd) == __pa_symbol(bm_pud))) {
+	    !(p4d_none(p4d) || p4d_page_paddr(p4d) == __pa_symbol(bm_pud))) {
 		/*
 		 * We only end up here if the kernel mapping and the fixmap
 		 * share the top level pgd entry, which should only happen on
 		 * 16k/4 levels configurations.
 		 */
 		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
-		pudp = pud_offset_kimg(pgdp, addr);
+		pudp = pud_offset_kimg(p4dp, addr);
 	} else {
-		if (pgd_none(pgd))
-			__pgd_populate(pgdp, __pa_symbol(bm_pud), PUD_TYPE_TABLE);
+		if (p4d_none(p4d))
+			__p4d_populate(p4dp, __pa_symbol(bm_pud), PUD_TYPE_TABLE);
 		pudp = fixmap_pud(addr);
 	}
 	if (pud_none(READ_ONCE(*pudp)))
diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c
index 4decf1659700..aafcee3e3f7e 100644
--- a/arch/arm64/mm/numa.c
+++ b/arch/arm64/mm/numa.c
@@ -350,13 +350,16 @@ static int __init numa_register_nodes(void)
 	struct memblock_region *mblk;
 
 	/* Check that valid nid is set to memblks */
-	for_each_memblock(memory, mblk)
-		if (mblk->nid == NUMA_NO_NODE || mblk->nid >= MAX_NUMNODES) {
+	for_each_memblock(memory, mblk) {
+		int mblk_nid = memblock_get_region_node(mblk);
+
+		if (mblk_nid == NUMA_NO_NODE || mblk_nid >= MAX_NUMNODES) {
 			pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
-				mblk->nid, mblk->base,
+				mblk_nid, mblk->base,
 				mblk->base + mblk->size - 1);
 			return -EINVAL;
 		}
+	}
 
 	/* Finally register nodes. */
 	for_each_node_mask(nid, numa_nodes_parsed) {
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
index 250c49008d73..5a310991ff73 100644
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -198,6 +198,7 @@ void __kernel_map_pages(struct page *page, int numpages, int enable)
 bool kernel_page_present(struct page *page)
 {
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp, pud;
 	pmd_t *pmdp, pmd;
 	pte_t *ptep;
@@ -210,7 +211,11 @@ bool kernel_page_present(struct page *page)
 	if (pgd_none(READ_ONCE(*pgdp)))
 		return false;
 
-	pudp = pud_offset(pgdp, addr);
+	p4dp = p4d_offset(pgdp, addr);
+	if (p4d_none(READ_ONCE(*p4dp)))
+		return false;
+
+	pudp = pud_offset(p4dp, addr);
 	pud = READ_ONCE(*pudp);
 	if (pud_none(pud))
 		return false;
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 197a9ba2d5ea..7d3bf1afba0c 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -139,7 +139,7 @@ alternative_if ARM64_HAS_RAS_EXTN
 	msr_s	SYS_DISR_EL1, xzr
 alternative_else_nop_endif
 
-	ptrauth_keys_install_kernel x14, 0, x1, x2, x3
+	ptrauth_keys_install_kernel_nosync x14, x1, x2, x3
 	isb
 	ret
 SYM_FUNC_END(cpu_do_resume)
@@ -386,8 +386,6 @@ SYM_FUNC_END(idmap_kpti_install_ng_mappings)
  *
  *	Initialise the processor for turning the MMU on.
  *
- * Input:
- *	x0 with a flag ARM64_CPU_BOOT_PRIMARY/ARM64_CPU_BOOT_SECONDARY/ARM64_CPU_RUNTIME.
  * Output:
  *	Return in x0 the value of the SCTLR_EL1 register.
  */
@@ -446,51 +444,9 @@ SYM_FUNC_START(__cpu_setup)
 1:
 #endif	/* CONFIG_ARM64_HW_AFDBM */
 	msr	tcr_el1, x10
-	mov	x1, x0
 	/*
 	 * Prepare SCTLR
 	 */
 	mov_q	x0, SCTLR_EL1_SET
-
-#ifdef CONFIG_ARM64_PTR_AUTH
-	/* No ptrauth setup for run time cpus */
-	cmp	x1, #ARM64_CPU_RUNTIME
-	b.eq	3f
-
-	/* Check if the CPU supports ptrauth */
-	mrs	x2, id_aa64isar1_el1
-	ubfx	x2, x2, #ID_AA64ISAR1_APA_SHIFT, #8
-	cbz	x2, 3f
-
-	/*
-	 * The primary cpu keys are reset here and can be
-	 * re-initialised with some proper values later.
-	 */
-	msr_s	SYS_APIAKEYLO_EL1, xzr
-	msr_s	SYS_APIAKEYHI_EL1, xzr
-
-	/* Just enable ptrauth for primary cpu */
-	cmp	x1, #ARM64_CPU_BOOT_PRIMARY
-	b.eq	2f
-
-	/* if !system_supports_address_auth() then skip enable */
-alternative_if_not ARM64_HAS_ADDRESS_AUTH
-	b	3f
-alternative_else_nop_endif
-
-	/* Install ptrauth key for secondary cpus */
-	adr_l	x2, secondary_data
-	ldr	x3, [x2, #CPU_BOOT_TASK]	// get secondary_data.task
-	cbz	x3, 2f				// check for slow booting cpus
-	ldp	x3, x4, [x2, #CPU_BOOT_PTRAUTH_KEY]
-	msr_s	SYS_APIAKEYLO_EL1, x3
-	msr_s	SYS_APIAKEYHI_EL1, x4
-
-2:	/* Enable ptrauth instructions */
-	ldr	x2, =SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \
-		     SCTLR_ELx_ENDA | SCTLR_ELx_ENDB
-	orr	x0, x0, x2
-3:
-#endif
 	ret					// return to head.S
 SYM_FUNC_END(__cpu_setup)
diff --git a/arch/c6x/kernel/traps.c b/arch/c6x/kernel/traps.c
index ec61034fdf56..2b9121c755be 100644
--- a/arch/c6x/kernel/traps.c
+++ b/arch/c6x/kernel/traps.c
@@ -344,12 +344,13 @@ asmlinkage int process_exception(struct pt_regs *regs)
 
 static int kstack_depth_to_print = 48;
 
-static void show_trace(unsigned long *stack, unsigned long *endstack)
+static void show_trace(unsigned long *stack, unsigned long *endstack,
+		       const char *loglvl)
 {
 	unsigned long addr;
 	int i;
 
-	pr_debug("Call trace:");
+	printk("%sCall trace:", loglvl);
 	i = 0;
 	while (stack + 1 <= endstack) {
 		addr = *stack++;
@@ -364,16 +365,17 @@ static void show_trace(unsigned long *stack, unsigned long *endstack)
 		if (__kernel_text_address(addr)) {
 #ifndef CONFIG_KALLSYMS
 			if (i % 5 == 0)
-				pr_debug("\n	    ");
+				printk("%s\n	    ", loglvl);
 #endif
-			pr_debug(" [<%08lx>] %pS\n", addr, (void *)addr);
+			printk("%s [<%08lx>] %pS\n", loglvl, addr, (void *)addr);
 			i++;
 		}
 	}
-	pr_debug("\n");
+	printk("%s\n", loglvl);
 }
 
-void show_stack(struct task_struct *task, unsigned long *stack)
+void show_stack(struct task_struct *task, unsigned long *stack,
+		const char *loglvl)
 {
 	unsigned long *p, *endstack;
 	int i;
@@ -398,7 +400,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 		pr_cont(" %08lx", *p++);
 	}
 	pr_cont("\n");
-	show_trace(stack, endstack);
+	show_trace(stack, endstack, loglvl);
 }
 
 int is_valid_bugaddr(unsigned long addr)
diff --git a/arch/c6x/mm/init.c b/arch/c6x/mm/init.c
index 9b374393a8f4..a97e51a3e26d 100644
--- a/arch/c6x/mm/init.c
+++ b/arch/c6x/mm/init.c
@@ -33,7 +33,7 @@ EXPORT_SYMBOL(empty_zero_page);
 void __init paging_init(void)
 {
 	struct pglist_data *pgdat = NODE_DATA(0);
-	unsigned long zones_size[MAX_NR_ZONES] = {0, };
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = {0, };
 
 	empty_zero_page      = (unsigned long) memblock_alloc(PAGE_SIZE,
 							      PAGE_SIZE);
@@ -49,11 +49,9 @@ void __init paging_init(void)
 	/*
 	 * Define zones
 	 */
-	zones_size[ZONE_NORMAL] = (memory_end - PAGE_OFFSET) >> PAGE_SHIFT;
-	pgdat->node_zones[ZONE_NORMAL].zone_start_pfn =
-		__pa(PAGE_OFFSET) >> PAGE_SHIFT;
+	max_zone_pfn[ZONE_NORMAL] = memory_end >> PAGE_SHIFT;
 
-	free_area_init(zones_size);
+	free_area_init(max_zone_pfn);
 }
 
 void __init mem_init(void)
diff --git a/arch/csky/abiv2/mcount.S b/arch/csky/abiv2/mcount.S
index 9331c7ed5958..911512bf480f 100644
--- a/arch/csky/abiv2/mcount.S
+++ b/arch/csky/abiv2/mcount.S
@@ -103,6 +103,8 @@ ENTRY(_mcount)
 	mov	a0, lr
 	subi	a0, 4
 	ldw	a1, (sp, 24)
+	lrw	a2, function_trace_op
+	ldw	a2, (a2, 0)
 
 	jsr	r26
 
diff --git a/arch/csky/include/asm/thread_info.h b/arch/csky/include/asm/thread_info.h
index 442fedad0260..5d33fcfd7f2a 100644
--- a/arch/csky/include/asm/thread_info.h
+++ b/arch/csky/include/asm/thread_info.h
@@ -54,10 +54,10 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SIGPENDING		0	/* signal pending */
 #define TIF_NOTIFY_RESUME	1       /* callback before returning to user */
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_SYSCALL_TRACE	3	/* syscall trace active */
-#define TIF_SYSCALL_TRACEPOINT	4       /* syscall tracepoint instrumentation */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing */
-#define TIF_UPROBE		6	/* uprobe breakpoint or singlestep */
+#define TIF_UPROBE		3	/* uprobe breakpoint or singlestep */
+#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
+#define TIF_SYSCALL_TRACEPOINT	5       /* syscall tracepoint instrumentation */
+#define TIF_SYSCALL_AUDIT	6	/* syscall auditing */
 #define TIF_POLLING_NRFLAG	16	/* poll_idle() is TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18      /* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
diff --git a/arch/csky/kernel/dumpstack.c b/arch/csky/kernel/dumpstack.c
index d67f9777cfd9..b9660b1944a1 100644
--- a/arch/csky/kernel/dumpstack.c
+++ b/arch/csky/kernel/dumpstack.c
@@ -5,7 +5,7 @@
 
 int kstack_depth_to_print = 48;
 
-void show_trace(unsigned long *stack)
+static void show_trace(unsigned long *stack, const char *loglvl)
 {
 	unsigned long *stack_end;
 	unsigned long *stack_start;
@@ -17,7 +17,7 @@ void show_trace(unsigned long *stack)
 	stack_end = (unsigned long *) (addr + THREAD_SIZE);
 
 	fp = stack;
-	pr_info("\nCall Trace:");
+	printk("%s\nCall Trace:", loglvl);
 
 	while (fp > stack_start && fp < stack_end) {
 #ifdef CONFIG_STACKTRACE
@@ -32,7 +32,8 @@ void show_trace(unsigned long *stack)
 	pr_cont("\n");
 }
 
-void show_stack(struct task_struct *task, unsigned long *stack)
+void show_stack(struct task_struct *task, unsigned long *stack,
+		const char *loglvl)
 {
 	if (!stack) {
 		if (task)
@@ -45,5 +46,5 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 #endif
 	}
 
-	show_trace(stack);
+	show_trace(stack, loglvl);
 }
diff --git a/arch/csky/kernel/ftrace.c b/arch/csky/kernel/ftrace.c
index 44628e3f7fa6..3c425b84e3be 100644
--- a/arch/csky/kernel/ftrace.c
+++ b/arch/csky/kernel/ftrace.c
@@ -202,6 +202,7 @@ int ftrace_disable_ftrace_graph_caller(void)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
+#ifdef CONFIG_DYNAMIC_FTRACE
 #ifndef CONFIG_CPU_HAS_ICACHE_INS
 struct ftrace_modify_param {
 	int command;
@@ -231,6 +232,7 @@ void arch_ftrace_update_code(int command)
 	stop_machine(__ftrace_modify_code, &param, cpu_online_mask);
 }
 #endif
+#endif /* CONFIG_DYNAMIC_FTRACE */
 
 /* _mcount is defined in abi's mcount.S */
 EXPORT_SYMBOL(_mcount);
diff --git a/arch/csky/kernel/probes/uprobes.c b/arch/csky/kernel/probes/uprobes.c
index b3a56c260e3e..1a9e0961b2b5 100644
--- a/arch/csky/kernel/probes/uprobes.c
+++ b/arch/csky/kernel/probes/uprobes.c
@@ -11,6 +11,11 @@
 
 #define UPROBE_TRAP_NR	UINT_MAX
 
+bool is_swbp_insn(uprobe_opcode_t *insn)
+{
+	return (*insn & 0xffff) == UPROBE_SWBP_INSN;
+}
+
 unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
 {
 	return instruction_pointer(regs);
diff --git a/arch/csky/kernel/ptrace.c b/arch/csky/kernel/ptrace.c
index 21ac2608f205..bbd801f86eb5 100644
--- a/arch/csky/kernel/ptrace.c
+++ b/arch/csky/kernel/ptrace.c
@@ -41,6 +41,9 @@ static void singlestep_disable(struct task_struct *tsk)
 
 	regs = task_pt_regs(tsk);
 	regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_RUN;
+
+	/* Enable irq */
+	regs->sr |= BIT(6);
 }
 
 static void singlestep_enable(struct task_struct *tsk)
@@ -49,6 +52,9 @@ static void singlestep_enable(struct task_struct *tsk)
 
 	regs = task_pt_regs(tsk);
 	regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_SI;
+
+	/* Disable irq */
+	regs->sr &= ~BIT(6);
 }
 
 /*
@@ -338,7 +344,7 @@ asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 		trace_sys_exit(regs, syscall_get_return_value(current, regs));
 }
 
-extern void show_stack(struct task_struct *task, unsigned long *stack);
+extern void show_stack(struct task_struct *task, unsigned long *stack, const char *loglvl);
 void show_regs(struct pt_regs *fp)
 {
 	unsigned long   *sp;
@@ -414,6 +420,6 @@ void show_regs(struct pt_regs *fp)
 	}
 	pr_cont("\n");
 
-	show_stack(NULL, (unsigned long *)fp->regs[4]);
+	show_stack(NULL, (unsigned long *)fp->regs[4], KERN_INFO);
 	return;
 }
diff --git a/arch/csky/kernel/setup.c b/arch/csky/kernel/setup.c
index 819a9a7bf786..0481f4e34538 100644
--- a/arch/csky/kernel/setup.c
+++ b/arch/csky/kernel/setup.c
@@ -26,7 +26,9 @@ struct screen_info screen_info = {
 
 static void __init csky_memblock_init(void)
 {
-	unsigned long zone_size[MAX_NR_ZONES];
+	unsigned long lowmem_size = PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
+	unsigned long sseg_size = PFN_DOWN(SSEG_SIZE - PHYS_OFFSET_OFFSET);
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 	signed long size;
 
 	memblock_reserve(__pa(_stext), _end - _stext);
@@ -36,28 +38,22 @@ static void __init csky_memblock_init(void)
 
 	memblock_dump_all();
 
-	memset(zone_size, 0, sizeof(zone_size));
-
 	min_low_pfn = PFN_UP(memblock_start_of_DRAM());
 	max_low_pfn = max_pfn = PFN_DOWN(memblock_end_of_DRAM());
 
 	size = max_pfn - min_low_pfn;
 
-	if (size <= PFN_DOWN(SSEG_SIZE - PHYS_OFFSET_OFFSET))
-		zone_size[ZONE_NORMAL] = size;
-	else if (size < PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET)) {
-		zone_size[ZONE_NORMAL] =
-				PFN_DOWN(SSEG_SIZE - PHYS_OFFSET_OFFSET);
-		max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
-	} else {
-		zone_size[ZONE_NORMAL] =
-				PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
-		max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
+	if (size >= lowmem_size) {
+		max_low_pfn = min_low_pfn + lowmem_size;
 		write_mmu_msa1(read_mmu_msa0() + SSEG_SIZE);
+	} else if (size > sseg_size) {
+		max_low_pfn = min_low_pfn + sseg_size;
 	}
 
+	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
+
 #ifdef CONFIG_HIGHMEM
-	zone_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
+	max_zone_pfn[ZONE_HIGHMEM] = max_pfn;
 
 	highstart_pfn = max_low_pfn;
 	highend_pfn   = max_pfn;
@@ -66,7 +62,7 @@ static void __init csky_memblock_init(void)
 
 	dma_contiguous_reserve(0);
 
-	free_area_init_node(0, zone_size, min_low_pfn, NULL);
+	free_area_init(max_zone_pfn);
 }
 
 void __init setup_arch(char **cmdline_p)
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
index b5e14d513e62..2b9cbaf41cd0 100644
--- a/arch/h8300/Kconfig.cpu
+++ b/arch/h8300/Kconfig.cpu
@@ -97,4 +97,8 @@ config OFFSET
         hex "Load offset"
 	default 0
 
+config BOOT_LINK_OFFSET
+	hex	"zImage link offset"
+	default	0x200000
+
 endmenu
diff --git a/arch/h8300/boot/dts/edosk2674.dts b/arch/h8300/boot/dts/edosk2674.dts
index d1733805ea67..f9731fe8c7d0 100644
--- a/arch/h8300/boot/dts/edosk2674.dts
+++ b/arch/h8300/boot/dts/edosk2674.dts
@@ -61,7 +61,7 @@ h8intc: interrupt-controller@fffe00 {
 		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		reg = <0xfffe00 24>;
+		reg = <0xfffe00 24>, <0xffff30 6>;
 	};
 
 	bsc: memory-controller@fffec0 {
@@ -79,7 +79,7 @@ tpu: timer@ffffe0 {
 	timer8: timer@ffffb0 {
 		compatible = "renesas,8bit-timer";
 		reg = <0xffffb0 10>;
-		interrupts = <72 0>;
+		interrupts = <72 0>, <73 0>, <74 0>;
 		clocks = <&fclk>;
 		clock-names = "fck";
 	};
@@ -105,4 +105,10 @@ sci2: serial@ffff88 {
 		clocks = <&fclk>;
 		clock-names = "fck";
 	};
+	ethernet: ethernet@f80000 {
+		compatible = "smsc,lan91c94";
+		reg = <0xf80000 0xfbffff>;
+		reg-io-width = <1>;
+		interrupts = <16 0>;
+	};
 };
diff --git a/arch/h8300/configs/edosk2674_defconfig b/arch/h8300/configs/edosk2674_defconfig
index 23791dcf6c25..bcf2edb8fff9 100644
--- a/arch/h8300/configs/edosk2674_defconfig
+++ b/arch/h8300/configs/edosk2674_defconfig
@@ -1,9 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_USELIB is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
@@ -12,17 +10,17 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 # CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_EMBEDDED=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLOB=y
+CONFIG_BOOT_LINK_OFFSET=0x400000
+CONFIG_H8S_EDOSK2674=y
 # CONFIG_BLOCK is not set
-CONFIG_H8S_SIM=y
-CONFIG_H8300_BUILTIN_DTB="h8s_sim"
 # CONFIG_BINFMT_SCRIPT is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set
-# CONFIG_UEVENT_HELPER is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
@@ -32,9 +30,7 @@ CONFIG_BINFMT_FLAT=y
 # CONFIG_VT is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
diff --git a/arch/h8300/configs/h8300h-sim_defconfig b/arch/h8300/configs/h8300h-sim_defconfig
index 7fc9c2f0acc0..1b90399758f3 100644
--- a/arch/h8300/configs/h8300h-sim_defconfig
+++ b/arch/h8300/configs/h8300h-sim_defconfig
@@ -1,9 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_USELIB is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
@@ -12,17 +10,17 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 # CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_EMBEDDED=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLOB=y
-# CONFIG_BLOCK is not set
 CONFIG_H8300H_SIM=y
 CONFIG_H8300_BUILTIN_DTB="h8300h_sim"
+# CONFIG_BLOCK is not set
 # CONFIG_BINFMT_SCRIPT is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set
-# CONFIG_UEVENT_HELPER is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
@@ -32,9 +30,7 @@ CONFIG_BINFMT_FLAT=y
 # CONFIG_VT is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_EARLYCON=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
diff --git a/arch/h8300/configs/h8s-sim_defconfig b/arch/h8300/configs/h8s-sim_defconfig
index 23791dcf6c25..4d46adcc21a4 100644
--- a/arch/h8300/configs/h8s-sim_defconfig
+++ b/arch/h8300/configs/h8s-sim_defconfig
@@ -1,9 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_USELIB is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
@@ -12,17 +10,17 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 # CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_EMBEDDED=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLOB=y
-# CONFIG_BLOCK is not set
 CONFIG_H8S_SIM=y
 CONFIG_H8300_BUILTIN_DTB="h8s_sim"
+# CONFIG_BLOCK is not set
 # CONFIG_BINFMT_SCRIPT is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set
-# CONFIG_UEVENT_HELPER is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
@@ -32,9 +30,7 @@ CONFIG_BINFMT_FLAT=y
 # CONFIG_VT is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
index 4d00152fab58..f00828720dc4 100644
--- a/arch/h8300/include/asm/pgtable.h
+++ b/arch/h8300/include/asm/pgtable.h
@@ -1,7 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _H8300_PGTABLE_H
 #define _H8300_PGTABLE_H
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopud.h>
 #include <asm-generic/pgtable.h>
 extern void paging_init(void);
diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c
index e47a9e0dc278..5d8b969cd8f3 100644
--- a/arch/h8300/kernel/traps.c
+++ b/arch/h8300/kernel/traps.c
@@ -115,7 +115,7 @@ void die(const char *str, struct pt_regs *fp, unsigned long err)
 
 static int kstack_depth_to_print = 24;
 
-void show_stack(struct task_struct *task, unsigned long *esp)
+void show_stack(struct task_struct *task, unsigned long *esp, const char *loglvl)
 {
 	unsigned long *stack,  addr;
 	int i;
@@ -125,17 +125,17 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 
 	stack = esp;
 
-	pr_info("Stack from %08lx:", (unsigned long)stack);
+	printk("%sStack from %08lx:", loglvl, (unsigned long)stack);
 	for (i = 0; i < kstack_depth_to_print; i++) {
 		if (((unsigned long)stack & (THREAD_SIZE - 1)) >=
 		    THREAD_SIZE-4)
 			break;
 		if (i % 8 == 0)
-			pr_info(" ");
+			printk("%s ", loglvl);
 		pr_cont(" %08lx", *stack++);
 	}
 
-	pr_info("\nCall Trace:\n");
+	printk("%s\nCall Trace:\n", loglvl);
 	i = 0;
 	stack = esp;
 	while (((unsigned long)stack & (THREAD_SIZE - 1)) < THREAD_SIZE-4) {
@@ -150,10 +150,10 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 		 */
 		if (check_kernel_text(addr)) {
 			if (i % 4 == 0)
-				pr_info("       ");
+				printk("%s       ", loglvl);
 			pr_cont(" [<%08lx>]", addr);
 			i++;
 		}
 	}
-	pr_info("\n");
+	printk("%s\n", loglvl);
 }
diff --git a/arch/h8300/lib/memset.S b/arch/h8300/lib/memset.S
index 2d1abc37fd08..df873779bb5e 100644
--- a/arch/h8300/lib/memset.S
+++ b/arch/h8300/lib/memset.S
@@ -19,13 +19,15 @@
 ;; c   = er1(r1l)
 ;; count = er2
 memset:
-	btst	#0,r0l
+	mov.l	er4,@-sp
+	mov.l	er0,er4
+	btst	#0,r4l
 	beq	2f
 
 	;; odd address
 1:
-	mov.b	r1l,@er0
-	adds	#1,er0
+	mov.b	r1l,@er4
+	adds	#1,er4
 	dec.l	#1,er2
 	beq	6f
 
@@ -46,8 +48,8 @@ memset:
 	mov.b	r1l,r1h
 	mov.w	r1,e1
 3:
-	mov.l	er1,@er0
-	adds	#4,er0
+	mov.l	er1,@er4
+	adds	#4,er4
 	dec.l	#1,er2
 	bne	3b
 4:
@@ -55,11 +57,12 @@ memset:
 	and.b	#3,r3l
 	beq	6f
 5:
-	mov.b	r1l,@er0
-	adds	#1,er0
+	mov.b	r1l,@er4
+	adds	#1,er4
 	dec.b	r3l
 	bne	5b
 6:
+	mov.l	@sp+,er4
 	rts
 
 clear_user:
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index 1eab16b1a0bc..27a0020e3771 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -83,10 +83,10 @@ void __init paging_init(void)
 		 start_mem, end_mem);
 
 	{
-		unsigned long zones_size[MAX_NR_ZONES] = {0, };
+		unsigned long max_zone_pfn[MAX_NR_ZONES] = {0, };
 
-		zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-		free_area_init(zones_size);
+		max_zone_pfn[ZONE_NORMAL] = end_mem >> PAGE_SHIFT;
+		free_area_init(max_zone_pfn);
 	}
 }
 
diff --git a/arch/hexagon/include/asm/fixmap.h b/arch/hexagon/include/asm/fixmap.h
index 933dac167504..97b1b062e750 100644
--- a/arch/hexagon/include/asm/fixmap.h
+++ b/arch/hexagon/include/asm/fixmap.h
@@ -16,7 +16,7 @@
 #include <asm-generic/fixmap.h>
 
 #define kmap_get_fixmap_pte(vaddr) \
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), \
-				(vaddr)), (vaddr)), (vaddr))
+	pte_offset_kernel(pmd_offset(pud_offset(p4d_offset(pgd_offset_k(vaddr), \
+				(vaddr)), (vaddr)), (vaddr)), (vaddr))
 
 #endif
diff --git a/arch/hexagon/include/asm/pgtable.h b/arch/hexagon/include/asm/pgtable.h
index d383e8bea5b2..2a17d4eb2fa4 100644
--- a/arch/hexagon/include/asm/pgtable.h
+++ b/arch/hexagon/include/asm/pgtable.h
@@ -12,7 +12,6 @@
  * Page table definitions for Qualcomm Hexagon processor.
  */
 #include <asm/page.h>
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
 /* A handy thing to have if one has the RAM. Declared in head.S */
diff --git a/arch/hexagon/kernel/traps.c b/arch/hexagon/kernel/traps.c
index 69c623b14ddd..904134b37232 100644
--- a/arch/hexagon/kernel/traps.c
+++ b/arch/hexagon/kernel/traps.c
@@ -79,7 +79,7 @@ static const char *ex_name(int ex)
 }
 
 static void do_show_stack(struct task_struct *task, unsigned long *fp,
-			  unsigned long ip)
+			  unsigned long ip, const char *loglvl)
 {
 	int kstack_depth_to_print = 24;
 	unsigned long offset, size;
@@ -93,9 +93,8 @@ static void do_show_stack(struct task_struct *task, unsigned long *fp,
 	if (task == NULL)
 		task = current;
 
-	printk(KERN_INFO "CPU#%d, %s/%d, Call Trace:\n",
-	       raw_smp_processor_id(), task->comm,
-	       task_pid_nr(task));
+	printk("%sCPU#%d, %s/%d, Call Trace:\n", loglvl, raw_smp_processor_id(),
+		task->comm, task_pid_nr(task));
 
 	if (fp == NULL) {
 		if (task == current) {
@@ -108,7 +107,7 @@ static void do_show_stack(struct task_struct *task, unsigned long *fp,
 	}
 
 	if ((((unsigned long) fp) & 0x3) || ((unsigned long) fp < 0x1000)) {
-		printk(KERN_INFO "-- Corrupt frame pointer %p\n", fp);
+		printk("%s-- Corrupt frame pointer %p\n", loglvl, fp);
 		return;
 	}
 
@@ -125,8 +124,7 @@ static void do_show_stack(struct task_struct *task, unsigned long *fp,
 
 		name = kallsyms_lookup(ip, &size, &offset, &modname, tmpstr);
 
-		printk(KERN_INFO "[%p] 0x%lx: %s + 0x%lx", fp, ip, name,
-			offset);
+		printk("%s[%p] 0x%lx: %s + 0x%lx", loglvl, fp, ip, name, offset);
 		if (((unsigned long) fp < low) || (high < (unsigned long) fp))
 			printk(KERN_CONT " (FP out of bounds!)");
 		if (modname)
@@ -136,8 +134,7 @@ static void do_show_stack(struct task_struct *task, unsigned long *fp,
 		newfp = (unsigned long *) *fp;
 
 		if (((unsigned long) newfp) & 0x3) {
-			printk(KERN_INFO "-- Corrupt frame pointer %p\n",
-				newfp);
+			printk("%s-- Corrupt frame pointer %p\n", loglvl, newfp);
 			break;
 		}
 
@@ -147,7 +144,7 @@ static void do_show_stack(struct task_struct *task, unsigned long *fp,
 						+ 8);
 
 			if (regs->syscall_nr != -1) {
-				printk(KERN_INFO "-- trap0 -- syscall_nr: %ld",
+				printk("%s-- trap0 -- syscall_nr: %ld", loglvl,
 					regs->syscall_nr);
 				printk(KERN_CONT "  psp: %lx  elr: %lx\n",
 					 pt_psp(regs), pt_elr(regs));
@@ -155,7 +152,7 @@ static void do_show_stack(struct task_struct *task, unsigned long *fp,
 			} else {
 				/* really want to see more ... */
 				kstack_depth_to_print += 6;
-				printk(KERN_INFO "-- %s (0x%lx)  badva: %lx\n",
+				printk("%s-- %s (0x%lx)  badva: %lx\n", loglvl,
 					ex_name(pt_cause(regs)), pt_cause(regs),
 					pt_badva(regs));
 			}
@@ -178,10 +175,10 @@ static void do_show_stack(struct task_struct *task, unsigned long *fp,
 	}
 }
 
-void show_stack(struct task_struct *task, unsigned long *fp)
+void show_stack(struct task_struct *task, unsigned long *fp, const char *loglvl)
 {
 	/* Saved link reg is one word above FP */
-	do_show_stack(task, fp, 0);
+	do_show_stack(task, fp, 0, loglvl);
 }
 
 int die(const char *str, struct pt_regs *regs, long err)
@@ -207,7 +204,7 @@ int die(const char *str, struct pt_regs *regs, long err)
 
 	print_modules();
 	show_regs(regs);
-	do_show_stack(current, &regs->r30, pt_elr(regs));
+	do_show_stack(current, &regs->r30, pt_elr(regs), KERN_EMERG);
 
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
diff --git a/arch/hexagon/mm/init.c b/arch/hexagon/mm/init.c
index c961773a6fff..f2e6c868e477 100644
--- a/arch/hexagon/mm/init.c
+++ b/arch/hexagon/mm/init.c
@@ -91,7 +91,7 @@ void sync_icache_dcache(pte_t pte)
  */
 void __init paging_init(void)
 {
-	unsigned long zones_sizes[MAX_NR_ZONES] = {0, };
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = {0, };
 
 	/*
 	 *  This is not particularly well documented anywhere, but
@@ -101,9 +101,9 @@ void __init paging_init(void)
 	 *  adjust accordingly.
 	 */
 
-	zones_sizes[ZONE_NORMAL] = max_low_pfn;
+	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
 
-	free_area_init(zones_sizes);  /*  sets up the zonelists and mem_map  */
+	free_area_init(max_zone_pfn);  /*  sets up the zonelists and mem_map  */
 
 	/*
 	 * Start of high memory area.  Will probably need something more
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index bab7cd878464..88b05b5256a9 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -31,7 +31,6 @@ config IA64
 	select HAVE_FUNCTION_TRACER
 	select TTY
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_VIRT_CPU_ACCOUNTING
 	select DMA_NONCOHERENT_MMAP
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
index f4c491044882..2a3050345099 100644
--- a/arch/ia64/include/asm/pgalloc.h
+++ b/arch/ia64/include/asm/pgalloc.h
@@ -36,9 +36,9 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 
 #if CONFIG_PGTABLE_LEVELS == 4
 static inline void
-pgd_populate(struct mm_struct *mm, pgd_t * pgd_entry, pud_t * pud)
+p4d_populate(struct mm_struct *mm, p4d_t * p4d_entry, pud_t * pud)
 {
-	pgd_val(*pgd_entry) = __pa(pud);
+	p4d_val(*p4d_entry) = __pa(pud);
 }
 
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 0e7b645b76c6..787b0a91d255 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -283,12 +283,12 @@ extern unsigned long VMALLOC_END;
 #define pud_page(pud)			virt_to_page((pud_val(pud) + PAGE_OFFSET))
 
 #if CONFIG_PGTABLE_LEVELS == 4
-#define pgd_none(pgd)			(!pgd_val(pgd))
-#define pgd_bad(pgd)			(!ia64_phys_addr_valid(pgd_val(pgd)))
-#define pgd_present(pgd)		(pgd_val(pgd) != 0UL)
-#define pgd_clear(pgdp)			(pgd_val(*(pgdp)) = 0UL)
-#define pgd_page_vaddr(pgd)		((unsigned long) __va(pgd_val(pgd) & _PFN_MASK))
-#define pgd_page(pgd)			virt_to_page((pgd_val(pgd) + PAGE_OFFSET))
+#define p4d_none(p4d)			(!p4d_val(p4d))
+#define p4d_bad(p4d)			(!ia64_phys_addr_valid(p4d_val(p4d)))
+#define p4d_present(p4d)		(p4d_val(p4d) != 0UL)
+#define p4d_clear(p4dp)			(p4d_val(*(p4dp)) = 0UL)
+#define p4d_page_vaddr(p4d)		((unsigned long) __va(p4d_val(p4d) & _PFN_MASK))
+#define p4d_page(p4d)			virt_to_page((p4d_val(p4d) + PAGE_OFFSET))
 #endif
 
 /*
@@ -386,7 +386,7 @@ pgd_offset (const struct mm_struct *mm, unsigned long address)
 #if CONFIG_PGTABLE_LEVELS == 4
 /* Find an entry in the second-level page table.. */
 #define pud_offset(dir,addr) \
-	((pud_t *) pgd_page_vaddr(*(dir)) + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+	((pud_t *) p4d_page_vaddr(*(dir)) + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
 #endif
 
 /* Find an entry in the third-level page table.. */
@@ -580,10 +580,9 @@ extern struct page *zero_page_memmap_ptr;
 
 
 #if CONFIG_PGTABLE_LEVELS == 3
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopud.h>
 #endif
-#include <asm-generic/5level-fixup.h>
+#include <asm-generic/pgtable-nop4d.h>
 #include <asm-generic/pgtable.h>
 
 #endif /* _ASM_IA64_PGTABLE_H */
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 7ff574d56429..b3aa46090101 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -114,7 +114,6 @@ static inline long regs_return_value(struct pt_regs *regs)
   struct task_struct;			/* forward decl */
   struct unw_frame_info;		/* forward decl */
 
-  extern void ia64_do_show_stack (struct unw_frame_info *, void *);
   extern unsigned long ia64_get_user_rbs_end (struct task_struct *, struct pt_regs *,
 					      unsigned long *);
   extern long ia64_peek (struct task_struct *, struct switch_stack *, unsigned long,
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index f69f3fe0532e..a54eacbc61a9 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -57,12 +57,12 @@ unsigned long hcdp_phys = EFI_INVALID_TABLE_ADDR;
 unsigned long sal_systab_phys = EFI_INVALID_TABLE_ADDR;
 
 static const efi_config_table_type_t arch_tables[] __initconst = {
-	{ESI_TABLE_GUID, "ESI", &esi_phys},
-	{HCDP_TABLE_GUID, "HCDP", &hcdp_phys},
-	{MPS_TABLE_GUID, "MPS", &mps_phys},
-	{PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID, "PALO", &palo_phys},
-	{SAL_SYSTEM_TABLE_GUID, "SALsystab", &sal_systab_phys},
-	{NULL_GUID, NULL, 0},
+	{ESI_TABLE_GUID,				&esi_phys,		"ESI"		},
+	{HCDP_TABLE_GUID,				&hcdp_phys,		"HCDP"		},
+	{MPS_TABLE_GUID,				&mps_phys,		"MPS"		},
+	{PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID,	&palo_phys,		"PALO"		},
+	{SAL_SYSTEM_TABLE_GUID,				&sal_systab_phys,	"SALsystab"	},
+	{},
 };
 
 extern efi_status_t efi_call_phys (void *, ...);
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 6fb54dfa1350..2703f7795672 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1631,7 +1631,7 @@ default_monarch_init_process(struct notifier_block *self, unsigned long val, voi
 	if (read_trylock(&tasklist_lock)) {
 		do_each_thread (g, t) {
 			printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm);
-			show_stack(t, NULL);
+			show_stack(t, NULL, KERN_DEFAULT);
 		} while_each_thread (g, t);
 		read_unlock(&tasklist_lock);
 	}
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 10cb9382ab76..96dfb9e4b16f 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -64,12 +64,13 @@ EXPORT_SYMBOL(boot_option_idle_override);
 void (*pm_power_off) (void);
 EXPORT_SYMBOL(pm_power_off);
 
-void
+static void
 ia64_do_show_stack (struct unw_frame_info *info, void *arg)
 {
 	unsigned long ip, sp, bsp;
+	const char *loglvl = arg;
 
-	printk("\nCall Trace:\n");
+	printk("%s\nCall Trace:\n", loglvl);
 	do {
 		unw_get_ip(info, &ip);
 		if (ip == 0)
@@ -77,22 +78,22 @@ ia64_do_show_stack (struct unw_frame_info *info, void *arg)
 
 		unw_get_sp(info, &sp);
 		unw_get_bsp(info, &bsp);
-		printk(" [<%016lx>] %pS\n"
+		printk("%s [<%016lx>] %pS\n"
 			 "                                sp=%016lx bsp=%016lx\n",
-			 ip, (void *)ip, sp, bsp);
+			 loglvl, ip, (void *)ip, sp, bsp);
 	} while (unw_unwind(info) >= 0);
 }
 
 void
-show_stack (struct task_struct *task, unsigned long *sp)
+show_stack (struct task_struct *task, unsigned long *sp, const char *loglvl)
 {
 	if (!task)
-		unw_init_running(ia64_do_show_stack, NULL);
+		unw_init_running(ia64_do_show_stack, (void *)loglvl);
 	else {
 		struct unw_frame_info info;
 
 		unw_init_from_blocked_task(&info, task);
-		ia64_do_show_stack(&info, NULL);
+		ia64_do_show_stack(&info, (void *)loglvl);
 	}
 }
 
@@ -150,7 +151,7 @@ show_regs (struct pt_regs *regs)
 			       ((i == sof - 1) || (i % 3) == 2) ? "\n" : " ");
 		}
 	} else
-		show_stack(NULL, NULL);
+		show_stack(NULL, NULL, KERN_DEFAULT);
 }
 
 /* local support for deprecated console_print */
diff --git a/arch/ia64/kernel/syscalls/syscall.tbl b/arch/ia64/kernel/syscalls/syscall.tbl
index 042911e670b8..9524af1c318c 100644
--- a/arch/ia64/kernel/syscalls/syscall.tbl
+++ b/arch/ia64/kernel/syscalls/syscall.tbl
@@ -358,3 +358,4 @@
 # 435 reserved for clone3
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
+439	common	process_madvise			sys_process_madvise
diff --git a/arch/ia64/kernel/unwind_i.h b/arch/ia64/kernel/unwind_i.h
index 67994a7e5816..1dd57ba44327 100644
--- a/arch/ia64/kernel/unwind_i.h
+++ b/arch/ia64/kernel/unwind_i.h
@@ -42,7 +42,7 @@ enum unw_register_index {
 
 struct unw_info_block {
 	u64 header;
-	u64 desc[0];		/* unwind descriptors */
+	u64 desc[];		/* unwind descriptors */
 	/* personality routine and language-specific data follow behind descriptors */
 };
 
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 5b00dc3898e1..8786fa5c7612 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -210,6 +210,6 @@ paging_init (void)
 		printk("Virtual mem_map starts at 0x%p\n", mem_map);
 	}
 #endif /* !CONFIG_VIRTUAL_MEM_MAP */
-	free_area_init_nodes(max_zone_pfns);
+	free_area_init(max_zone_pfns);
 	zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
 }
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 4f33f6e7e206..dd8284bcbf16 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -627,7 +627,7 @@ void __init paging_init(void)
 	max_zone_pfns[ZONE_DMA32] = max_dma;
 #endif
 	max_zone_pfns[ZONE_NORMAL] = max_pfn;
-	free_area_init_nodes(max_zone_pfns);
+	free_area_init(max_zone_pfns);
 
 	zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
 }
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 30d0c1fca99e..12242aa0dad1 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -29,6 +29,7 @@ static int
 mapped_kernel_page_is_present (unsigned long address)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *ptep, pte;
@@ -37,7 +38,11 @@ mapped_kernel_page_is_present (unsigned long address)
 	if (pgd_none(*pgd) || pgd_bad(*pgd))
 		return 0;
 
-	pud = pud_offset(pgd, address);
+	p4d = p4d_offset(pgd, address);
+	if (p4d_none(*p4d) || p4d_bad(*p4d))
+		return 0;
+
+	pud = pud_offset(p4d, address);
 	if (pud_none(*pud) || pud_bad(*pud))
 		return 0;
 
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index d16e419fd712..32352a73df0c 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -30,12 +30,14 @@ huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
 	unsigned long taddr = htlbpage_to_page(addr);
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte = NULL;
 
 	pgd = pgd_offset(mm, taddr);
-	pud = pud_alloc(mm, pgd, taddr);
+	p4d = p4d_offset(pgd, taddr);
+	pud = pud_alloc(mm, p4d, taddr);
 	if (pud) {
 		pmd = pmd_alloc(mm, pud, taddr);
 		if (pmd)
@@ -49,17 +51,21 @@ huge_pte_offset (struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
 	unsigned long taddr = htlbpage_to_page(addr);
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte = NULL;
 
 	pgd = pgd_offset(mm, taddr);
 	if (pgd_present(*pgd)) {
-		pud = pud_offset(pgd, taddr);
-		if (pud_present(*pud)) {
-			pmd = pmd_offset(pud, taddr);
-			if (pmd_present(*pmd))
-				pte = pte_offset_map(pmd, taddr);
+		p4d = p4d_offset(pgd, addr);
+		if (p4d_present(*p4d)) {
+			pud = pud_offset(p4d, taddr);
+			if (pud_present(*pud)) {
+				pmd = pmd_offset(pud, taddr);
+				if (pmd_present(*pmd))
+					pte = pte_offset_map(pmd, taddr);
+			}
 		}
 	}
 
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index d637b4ea3147..ca760f6cb18f 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -208,6 +208,7 @@ static struct page * __init
 put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -215,7 +216,10 @@ put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot)
 	pgd = pgd_offset_k(address);		/* note: this is NOT pgd_offset()! */
 
 	{
-		pud = pud_alloc(&init_mm, pgd, address);
+		p4d = p4d_alloc(&init_mm, pgd, address);
+		if (!p4d)
+			goto out;
+		pud = pud_alloc(&init_mm, p4d, address);
 		if (!pud)
 			goto out;
 		pmd = pmd_alloc(&init_mm, pud, address);
@@ -382,6 +386,7 @@ int vmemmap_find_next_valid_pfn(int node, int i)
 
 	do {
 		pgd_t *pgd;
+		p4d_t *p4d;
 		pud_t *pud;
 		pmd_t *pmd;
 		pte_t *pte;
@@ -392,7 +397,13 @@ int vmemmap_find_next_valid_pfn(int node, int i)
 			continue;
 		}
 
-		pud = pud_offset(pgd, end_address);
+		p4d = p4d_offset(pgd, end_address);
+		if (p4d_none(*p4d)) {
+			end_address += P4D_SIZE;
+			continue;
+		}
+
+		pud = pud_offset(p4d, end_address);
 		if (pud_none(*pud)) {
 			end_address += PUD_SIZE;
 			continue;
@@ -430,6 +441,7 @@ int __init create_mem_map_page_table(u64 start, u64 end, void *arg)
 	struct page *map_start, *map_end;
 	int node;
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -444,12 +456,20 @@ int __init create_mem_map_page_table(u64 start, u64 end, void *arg)
 	for (address = start_page; address < end_page; address += PAGE_SIZE) {
 		pgd = pgd_offset_k(address);
 		if (pgd_none(*pgd)) {
+			p4d = memblock_alloc_node(PAGE_SIZE, PAGE_SIZE, node);
+			if (!p4d)
+				goto err_alloc;
+			pgd_populate(&init_mm, pgd, p4d);
+		}
+		p4d = p4d_offset(pgd, address);
+
+		if (p4d_none(*p4d)) {
 			pud = memblock_alloc_node(PAGE_SIZE, PAGE_SIZE, node);
 			if (!pud)
 				goto err_alloc;
-			pgd_populate(&init_mm, pgd, pud);
+			p4d_populate(&init_mm, p4d, pud);
 		}
-		pud = pud_offset(pgd, address);
+		pud = pud_offset(p4d, address);
 
 		if (pud_none(*pud)) {
 			pmd = memblock_alloc_node(PAGE_SIZE, PAGE_SIZE, node);
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index c32ab8041cf6..4eb911d64e8d 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -221,6 +221,7 @@ static void __init amiga_identify(void)
 	case AMI_1200:
 		AMIGAHW_SET(A1200_IDE);
 		AMIGAHW_SET(PCMCIA);
+		fallthrough;
 	case AMI_500:
 	case AMI_500PLUS:
 	case AMI_1000:
@@ -233,7 +234,7 @@ static void __init amiga_identify(void)
 	case AMI_3000T:
 		AMIGAHW_SET(AMBER_FF);
 		AMIGAHW_SET(MAGIC_REKICK);
-		/* fall through */
+		fallthrough;
 	case AMI_3000PLUS:
 		AMIGAHW_SET(A3000_SCSI);
 		AMIGAHW_SET(A3000_CLK);
@@ -242,7 +243,7 @@ static void __init amiga_identify(void)
 
 	case AMI_4000T:
 		AMIGAHW_SET(A4000_SCSI);
-		/* fall through */
+		fallthrough;
 	case AMI_4000:
 		AMIGAHW_SET(A4000_IDE);
 		AMIGAHW_SET(A3000_CLK);
@@ -628,7 +629,7 @@ struct savekmsg {
 	unsigned long magic2;		/* SAVEKMSG_MAGIC2 */
 	unsigned long magicptr;		/* address of magic1 */
 	unsigned long size;
-	char data[0];
+	char data[];
 };
 
 static struct savekmsg *savekmsg;
diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c
index 62b0eb6cf69a..84eab0f5e00a 100644
--- a/arch/m68k/coldfire/pci.c
+++ b/arch/m68k/coldfire/pci.c
@@ -216,8 +216,10 @@ static int __init mcf_pci_init(void)
 
 	/* Keep a virtual mapping to IO/config space active */
 	iospace = (unsigned long) ioremap(PCI_IO_PA, PCI_IO_SIZE);
-	if (iospace == 0)
+	if (iospace == 0) {
+		pci_free_host_bridge(bridge);
 		return -ENODEV;
+	}
 	pr_info("Coldfire: PCI IO/config window mapped to 0x%x\n",
 		(u32) iospace);
 
diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl
index f4f49fcb76d0..8197050c097c 100644
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@@ -437,3 +437,4 @@
 435	common	clone3				__sys_clone3
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
+439	common	process_madvise			sys_process_madvise
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 344f93d36a9a..df6fc782754f 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -811,13 +811,13 @@ asmlinkage void buserr_c(struct frame *fp)
 
 static int kstack_depth_to_print = 48;
 
-void show_trace(unsigned long *stack)
+static void show_trace(unsigned long *stack, const char *loglvl)
 {
 	unsigned long *endstack;
 	unsigned long addr;
 	int i;
 
-	pr_info("Call Trace:");
+	printk("%sCall Trace:", loglvl);
 	addr = (unsigned long)stack + THREAD_SIZE - 1;
 	endstack = (unsigned long *)(addr & -THREAD_SIZE);
 	i = 0;
@@ -916,7 +916,7 @@ void show_registers(struct pt_regs *regs)
 	default:
 		pr_cont("\n");
 	}
-	show_stack(NULL, (unsigned long *)addr);
+	show_stack(NULL, (unsigned long *)addr, KERN_INFO);
 
 	pr_info("Code:");
 	set_fs(KERNEL_DS);
@@ -935,7 +935,8 @@ void show_registers(struct pt_regs *regs)
 	pr_cont("\n");
 }
 
-void show_stack(struct task_struct *task, unsigned long *stack)
+void show_stack(struct task_struct *task, unsigned long *stack,
+		const char *loglvl)
 {
 	unsigned long *p;
 	unsigned long *endstack;
@@ -949,7 +950,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	}
 	endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1) & -THREAD_SIZE);
 
-	pr_info("Stack from %08lx:", (unsigned long)stack);
+	printk("%sStack from %08lx:", loglvl, (unsigned long)stack);
 	p = stack;
 	for (i = 0; i < kstack_depth_to_print; i++) {
 		if (p + 1 > endstack)
@@ -959,7 +960,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 		pr_cont(" %08lx", *p++);
 	}
 	pr_cont("\n");
-	show_trace(stack);
+	show_trace(stack, loglvl);
 }
 
 /*
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index b88d510d4fe3..6d3147662ff2 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -84,7 +84,7 @@ void __init paging_init(void)
 	 * page_alloc get different views of the world.
 	 */
 	unsigned long end_mem = memory_end & PAGE_MASK;
-	unsigned long zones_size[MAX_NR_ZONES] = { 0, };
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0, };
 
 	high_memory = (void *) end_mem;
 
@@ -98,8 +98,8 @@ void __init paging_init(void)
 	 */
 	set_fs (USER_DS);
 
-	zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-	free_area_init(zones_size);
+	max_zone_pfn[ZONE_DMA] = end_mem >> PAGE_SHIFT;
+	free_area_init(max_zone_pfn);
 }
 
 #endif /* CONFIG_MMU */
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
index 0ea375607767..80064e6d064f 100644
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@@ -39,7 +39,7 @@ void __init paging_init(void)
 	pte_t *pg_table;
 	unsigned long address, size;
 	unsigned long next_pgtable, bootmem_end;
-	unsigned long zones_size[MAX_NR_ZONES];
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 	enum zone_type zone;
 	int i;
 
@@ -80,11 +80,8 @@ void __init paging_init(void)
 	}
 
 	current->mm = NULL;
-
-	for (zone = 0; zone < MAX_NR_ZONES; zone++)
-		zones_size[zone] = 0x0;
-	zones_size[ZONE_DMA] = num_pages;
-	free_area_init(zones_size);
+	max_zone_pfn[ZONE_DMA] = PFN_DOWN(_ramend);
+	free_area_init(max_zone_pfn);
 }
 
 int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index fc16190ec2d6..904c2a663977 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -365,7 +365,7 @@ static void __init map_node(int node)
  */
 void __init paging_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES] = { 0, };
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0, };
 	unsigned long min_addr, max_addr;
 	unsigned long addr;
 	int i;
@@ -386,7 +386,7 @@ void __init paging_init(void)
 
 	min_addr = m68k_memory[0].addr;
 	max_addr = min_addr + m68k_memory[0].size;
-	memblock_add(m68k_memory[0].addr, m68k_memory[0].size);
+	memblock_add_node(m68k_memory[0].addr, m68k_memory[0].size, 0);
 	for (i = 1; i < m68k_num_memory;) {
 		if (m68k_memory[i].addr < min_addr) {
 			printk("Ignoring memory chunk at 0x%lx:0x%lx before the first chunk\n",
@@ -397,7 +397,7 @@ void __init paging_init(void)
 				(m68k_num_memory - i) * sizeof(struct m68k_mem_info));
 			continue;
 		}
-		memblock_add(m68k_memory[i].addr, m68k_memory[i].size);
+		memblock_add_node(m68k_memory[i].addr, m68k_memory[i].size, i);
 		addr = m68k_memory[i].addr + m68k_memory[i].size;
 		if (addr > max_addr)
 			max_addr = addr;
@@ -448,11 +448,10 @@ void __init paging_init(void)
 #ifdef DEBUG
 	printk ("before free_area_init\n");
 #endif
-	for (i = 0; i < m68k_num_memory; i++) {
-		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
-		free_area_init_node(i, zones_size,
-				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
+	for (i = 0; i < m68k_num_memory; i++)
 		if (node_present_pages(i))
 			node_set_state(i, N_NORMAL_MEMORY);
-	}
+
+	max_zone_pfn[ZONE_DMA] = memblock_end_of_DRAM();
+	free_area_init(max_zone_pfn);
 }
diff --git a/arch/m68k/mm/sun3mmu.c b/arch/m68k/mm/sun3mmu.c
index eca1c46bb90a..5d8d956d9329 100644
--- a/arch/m68k/mm/sun3mmu.c
+++ b/arch/m68k/mm/sun3mmu.c
@@ -42,7 +42,7 @@ void __init paging_init(void)
 	unsigned long address;
 	unsigned long next_pgtable;
 	unsigned long bootmem_end;
-	unsigned long zones_size[MAX_NR_ZONES] = { 0, };
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0, };
 	unsigned long size;
 
 	empty_zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
@@ -89,14 +89,10 @@ void __init paging_init(void)
 	current->mm = NULL;
 
 	/* memory sizing is a hack stolen from motorola.c..  hope it works for us */
-	zones_size[ZONE_DMA] = ((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
+	max_zone_pfn[ZONE_DMA] = ((unsigned long)high_memory) >> PAGE_SHIFT;
 
 	/* I really wish I knew why the following change made things better...  -- Sam */
-/*	free_area_init(zones_size); */
-	free_area_init_node(0, zones_size,
-			    (__pa(PAGE_OFFSET) >> PAGE_SHIFT) + 1, NULL);
+	free_area_init(max_zone_pfn);
 
 
 }
-
-
diff --git a/arch/m68k/tools/amiga/dmesg.c b/arch/m68k/tools/amiga/dmesg.c
index 7340f5b6cf6d..3341dc0cdd2a 100644
--- a/arch/m68k/tools/amiga/dmesg.c
+++ b/arch/m68k/tools/amiga/dmesg.c
@@ -30,11 +30,11 @@
 #define SAVEKMSG_MAGIC2	0x4B4D5347	/* 'KMSG' */
 
 struct savekmsg {
-    u_long magic1;	/* SAVEKMSG_MAGIC1 */
-    u_long magic2;	/* SAVEKMSG_MAGIC2 */
-    u_long magicptr;	/* address of magic1 */
-    u_long size;
-    char data[0];
+	u_long magic1;	/* SAVEKMSG_MAGIC1 */
+	u_long magic2;	/* SAVEKMSG_MAGIC2 */
+	u_long magicptr;	/* address of magic1 */
+	u_long size;
+	char data[];
 };
 
 
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 9606c244b5b8..d262ac0c8714 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -32,7 +32,6 @@ config MICROBLAZE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
-	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_OPROFILE
 	select HAVE_PCI
 	select IRQ_DOMAIN
diff --git a/arch/microblaze/include/asm/unwind.h b/arch/microblaze/include/asm/unwind.h
index c327d673622a..3db81777a887 100644
--- a/arch/microblaze/include/asm/unwind.h
+++ b/arch/microblaze/include/asm/unwind.h
@@ -20,7 +20,8 @@ extern struct trap_handler_info microblaze_trap_handlers;
 extern const char _hw_exception_handler;
 extern const char ex_handler_unhandled;
 
-void microblaze_unwind(struct task_struct *task, struct stack_trace *trace);
+void microblaze_unwind(struct task_struct *task, struct stack_trace *trace,
+		       const char *loglvl);
 
 #endif	/* __MICROBLAZE_UNWIND_H */
 
diff --git a/arch/microblaze/kernel/stacktrace.c b/arch/microblaze/kernel/stacktrace.c
index b4debe283a79..b266c4d6ed9d 100644
--- a/arch/microblaze/kernel/stacktrace.c
+++ b/arch/microblaze/kernel/stacktrace.c
@@ -20,12 +20,12 @@ void save_stack_trace(struct stack_trace *trace)
 {
 	/* Exclude our helper functions from the trace*/
 	trace->skip += 2;
-	microblaze_unwind(NULL, trace);
+	microblaze_unwind(NULL, trace, "");
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
-	microblaze_unwind(tsk, trace);
+	microblaze_unwind(tsk, trace, "");
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
index 4c67b11f9c9e..c5b6c8afe445 100644
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -443,3 +443,4 @@
 435	common	clone3				sys_clone3
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
+439	common	process_madvise			sys_process_madvise
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
index 45bbba9d919f..94b6fe93147d 100644
--- a/arch/microblaze/kernel/traps.c
+++ b/arch/microblaze/kernel/traps.c
@@ -31,7 +31,7 @@ static int __init kstack_setup(char *s)
 }
 __setup("kstack=", kstack_setup);
 
-void show_stack(struct task_struct *task, unsigned long *sp)
+void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
 {
 	unsigned long words_to_show;
 	u32 fp = (u32) sp;
@@ -50,7 +50,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 	if (kstack_depth_to_print && (words_to_show > kstack_depth_to_print))
 		words_to_show = kstack_depth_to_print;
 
-	pr_info("Kernel Stack:\n");
+	printk("%sKernel Stack:\n", loglvl);
 
 	/*
 	 * Make the first line an 'odd' size if necessary to get
@@ -65,11 +65,11 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 			words_to_show -= line1_words;
 		}
 	}
-	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 32, 4, (void *)fp,
+	print_hex_dump(loglvl, "", DUMP_PREFIX_ADDRESS, 32, 4, (void *)fp,
 		       words_to_show << 2, 0);
-	pr_info("\n\nCall Trace:\n");
-	microblaze_unwind(task, NULL);
-	pr_info("\n");
+	printk("%s\n\nCall Trace:\n", loglvl);
+	microblaze_unwind(task, NULL, loglvl);
+	printk("%s\n", loglvl);
 
 	if (!task)
 		task = current;
diff --git a/arch/microblaze/kernel/unwind.c b/arch/microblaze/kernel/unwind.c
index 34c270cb11fc..778a761af0a7 100644
--- a/arch/microblaze/kernel/unwind.c
+++ b/arch/microblaze/kernel/unwind.c
@@ -154,7 +154,8 @@ static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
 static void microblaze_unwind_inner(struct task_struct *task,
 				    unsigned long pc, unsigned long fp,
 				    unsigned long leaf_return,
-				    struct stack_trace *trace);
+				    struct stack_trace *trace,
+				    const char *loglvl);
 
 /**
  * unwind_trap - Unwind through a system trap, that stored previous state
@@ -162,16 +163,18 @@ static void microblaze_unwind_inner(struct task_struct *task,
  */
 #ifdef CONFIG_MMU
 static inline void unwind_trap(struct task_struct *task, unsigned long pc,
-				unsigned long fp, struct stack_trace *trace)
+				unsigned long fp, struct stack_trace *trace,
+				const char *loglvl)
 {
 	/* To be implemented */
 }
 #else
 static inline void unwind_trap(struct task_struct *task, unsigned long pc,
-				unsigned long fp, struct stack_trace *trace)
+				unsigned long fp, struct stack_trace *trace,
+				const char *loglvl)
 {
 	const struct pt_regs *regs = (const struct pt_regs *) fp;
-	microblaze_unwind_inner(task, regs->pc, regs->r1, regs->r15, trace);
+	microblaze_unwind_inner(task, regs->pc, regs->r1, regs->r15, trace, loglvl);
 }
 #endif
 
@@ -184,11 +187,13 @@ static inline void unwind_trap(struct task_struct *task, unsigned long pc,
  *				  the caller's return address.
  * @trace : Where to store stack backtrace (PC values).
  *	    NULL == print backtrace to kernel log
+ * @loglvl : Used for printk log level if (trace == NULL).
  */
 static void microblaze_unwind_inner(struct task_struct *task,
 			     unsigned long pc, unsigned long fp,
 			     unsigned long leaf_return,
-			     struct stack_trace *trace)
+			     struct stack_trace *trace,
+			     const char *loglvl)
 {
 	int ofs = 0;
 
@@ -214,11 +219,11 @@ static void microblaze_unwind_inner(struct task_struct *task,
 			const struct pt_regs *regs =
 				(const struct pt_regs *) fp;
 #endif
-			pr_info("HW EXCEPTION\n");
+			printk("%sHW EXCEPTION\n", loglvl);
 #ifndef CONFIG_MMU
 			microblaze_unwind_inner(task, regs->r17 - 4,
 						fp + EX_HANDLER_STACK_SIZ,
-						regs->r15, trace);
+						regs->r15, trace, loglvl);
 #endif
 			return;
 		}
@@ -228,8 +233,8 @@ static void microblaze_unwind_inner(struct task_struct *task,
 			if ((return_to >= handler->start_addr)
 			    && (return_to <= handler->end_addr)) {
 				if (!trace)
-					pr_info("%s\n", handler->trap_name);
-				unwind_trap(task, pc, fp, trace);
+					printk("%s%s\n", loglvl, handler->trap_name);
+				unwind_trap(task, pc, fp, trace, loglvl);
 				return;
 			}
 		}
@@ -248,13 +253,13 @@ static void microblaze_unwind_inner(struct task_struct *task,
 		} else {
 			/* Have we reached userland? */
 			if (unlikely(pc == task_pt_regs(task)->pc)) {
-				pr_info("[<%p>] PID %lu [%s]\n",
-					(void *) pc,
+				printk("%s[<%p>] PID %lu [%s]\n",
+					loglvl, (void *) pc,
 					(unsigned long) task->pid,
 					task->comm);
 				break;
 			} else
-				print_ip_sym(pc);
+				print_ip_sym(loglvl, pc);
 		}
 
 		/* Stop when we reach anything not part of the kernel */
@@ -282,14 +287,16 @@ static void microblaze_unwind_inner(struct task_struct *task,
  * @task  : Task whose stack we are to unwind (NULL == current)
  * @trace : Where to store stack backtrace (PC values).
  *	    NULL == print backtrace to kernel log
+ * @loglvl : Used for printk log level if (trace == NULL).
  */
-void microblaze_unwind(struct task_struct *task, struct stack_trace *trace)
+void microblaze_unwind(struct task_struct *task, struct stack_trace *trace,
+		       const char *loglvl)
 {
 	if (task) {
 		if (task == current) {
 			const struct pt_regs *regs = task_pt_regs(task);
 			microblaze_unwind_inner(task, regs->pc, regs->r1,
-						regs->r15, trace);
+						regs->r15, trace, loglvl);
 		} else {
 			struct thread_info *thread_info =
 				(struct thread_info *)(task->stack);
@@ -299,7 +306,8 @@ void microblaze_unwind(struct task_struct *task, struct stack_trace *trace)
 			microblaze_unwind_inner(task,
 						(unsigned long) &_switch_to,
 						cpu_context->r1,
-						cpu_context->r15, trace);
+						cpu_context->r15,
+						trace, loglvl);
 		}
 	} else {
 		unsigned long pc, fp;
@@ -314,7 +322,7 @@ void microblaze_unwind(struct task_struct *task, struct stack_trace *trace)
 		);
 
 		/* Since we are not a leaf function, use leaf_return = 0 */
-		microblaze_unwind_inner(current, pc, fp, 0, trace);
+		microblaze_unwind_inner(current, pc, fp, 0, trace, loglvl);
 	}
 }
 
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 1ffbfa96b9b8..dcaa53d11339 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -112,7 +112,7 @@ static void __init paging_init(void)
 #endif
 
 	/* We don't have holes in memory map */
-	free_area_init_nodes(zones_size);
+	free_area_init(zones_size);
 }
 
 void __init setup_memory(void)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 690718b3701a..0519ca9f00f9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -72,7 +72,6 @@ config MIPS
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
-	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_OPROFILE
@@ -92,6 +91,9 @@ config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select VIRT_TO_BUS
 
+config MIPS_FIXUP_BIGPHYS_ADDR
+	bool
+
 menu "Machine selection"
 
 choice
@@ -157,6 +159,7 @@ config MIPS_ALCHEMY
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
 	select DMA_MAYBE_COHERENT	# Au1000,1500,1100 aren't, rest is
+	select MIPS_FIXUP_BIGPHYS_ADDR if PCI
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
@@ -475,7 +478,7 @@ config MACH_LOONGSON64
 	select ISA
 	select I8259
 	select IRQ_MIPS_CPU
-	select NR_CPUS_DEFAULT_4
+	select NR_CPUS_DEFAULT_64
 	select USE_GENERIC_EARLY_PRINTK_8250
 	select SYS_HAS_CPU_LOONGSON64
 	select SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 7faaa6d593a7..0f60efe0481e 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -27,6 +27,7 @@
 
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/mm.h>
 
 #include <asm/dma-coherence.h>
 #include <asm/mipsregs.h>
@@ -72,9 +73,9 @@ void __init plat_mem_setup(void)
 	iomem_resource.end = IOMEM_RESOURCE_END;
 }
 
-#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
+#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR
 /* This routine should be valid for all Au1x based boards */
-phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
 {
 	unsigned long start = ALCHEMY_PCI_MEMWIN_START;
 	unsigned long end = ALCHEMY_PCI_MEMWIN_END;
@@ -90,5 +91,13 @@ phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
 	/* default nop */
 	return phys_addr;
 }
-EXPORT_SYMBOL(__fixup_bigphys_addr);
-#endif
+
+int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr,
+		unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+	phys_addr_t phys_addr = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+
+	return remap_pfn_range(vma, vaddr, phys_addr >> PAGE_SHIFT, size, prot);
+}
+EXPORT_SYMBOL(io_remap_pfn_range);
+#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index db0ca250bd1a..75f5bfbf2c37 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -386,6 +386,9 @@ dm9000@6 {
 
 		interrupt-parent = <&gpe>;
 		interrupts = <19 4>;
+
+		nvmem-cells = <&eth0_addr>;
+		nvmem-cell-names = "mac-address";
 	};
 };
 
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
index f58d239c2058..c2396b5ca175 100644
--- a/arch/mips/boot/dts/ingenic/gcw0.dts
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -4,6 +4,10 @@
 #include "jz4770.dtsi"
 #include <dt-bindings/clock/ingenic,tcu.h>
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/input.h>
+
 / {
 	compatible = "gcw,zero", "ingenic,jz4770";
 	model = "GCW Zero";
@@ -19,16 +23,360 @@ chosen {
 		stdout-path = "serial2:57600n8";
 	};
 
-	board {
-		compatible = "simple-bus";
+	vcc: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	mmc1_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_vcc";
+		gpio = <&gpe 9 0>;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc>;
+	};
+
+	headphones_amp: analog-amplifier@0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpf 3 GPIO_ACTIVE_LOW>;
+		enable-delay-ms = <50>;
+
+		VCC-supply = <&ldo5>;
+		sound-name-prefix = "Headphones Amp";
+	};
+
+	speaker_amp: analog-amplifier@1 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpf 20 GPIO_ACTIVE_HIGH>;
+
+		VCC-supply = <&ldo5>;
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "gcw0-audio";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,widgets =
+			"Speaker", "Speaker",
+			"Headphone", "Headphones",
+			"Line", "FM Radio",
+			"Microphone", "Built-in Mic";
+		simple-audio-card,routing =
+			"Headphones Amp INL", "LHPOUT",
+			"Headphones Amp INR", "RHPOUT",
+			"Headphones", "Headphones Amp OUTL",
+			"Headphones", "Headphones Amp OUTR",
+			"Speaker Amp INL", "LOUT",
+			"Speaker Amp INR", "ROUT",
+			"Speaker", "Speaker Amp OUTL",
+			"Speaker", "Speaker Amp OUTR",
+			"LLINEIN", "FM Radio",
+			"RLINEIN", "FM Radio",
+			"Built-in Mic", "MICBIAS",
+			"MIC1P", "Built-in Mic",
+			"MIC1N", "Built-in Mic";
+		simple-audio-card,pin-switches = "Speaker", "Headphones";
+
+		simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
+
+		simple-audio-card,bitclock-master = <&dai_codec>;
+		simple-audio-card,frame-master = <&dai_codec>;
+
+		dai_cpu: simple-audio-card,cpu {
+			sound-dai = <&aic>;
+		};
+
+		dai_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	rumble {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm 4 2000000 0>;
+		pwm-names = "enable";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_pwm4>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000 0>;
+		power-supply = <&vcc>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128
+				     144 160 176 192 208 224 240 255>;
+		default-brightness-level = <12>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_pwm1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		autorepeat;
+
+		button@0 {
+			label = "D-pad up";
+			linux,code = <KEY_UP>;
+			linux,can-disable;
+			gpios = <&gpe 21 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "D-pad down";
+			linux,code = <KEY_DOWN>;
+			linux,can-disable;
+			gpios = <&gpe 25 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "D-pad left";
+			linux,code = <KEY_LEFT>;
+			linux,can-disable;
+			gpios = <&gpe 23 GPIO_ACTIVE_LOW>;
+		};
+
+		button@3 {
+			label = "D-pad right";
+			linux,code = <KEY_RIGHT>;
+			linux,can-disable;
+			gpios = <&gpe 24 GPIO_ACTIVE_LOW>;
+		};
+
+		button@4 {
+			label = "Button A";
+			linux,code = <KEY_LEFTCTRL>;
+			linux,can-disable;
+			gpios = <&gpe 29 GPIO_ACTIVE_LOW>;
+		};
+
+		button@5 {
+			label = "Button B";
+			linux,code = <KEY_LEFTALT>;
+			linux,can-disable;
+			gpios = <&gpe 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button@6 {
+			label = "Button Y";
+			linux,code = <KEY_SPACE>;
+			linux,can-disable;
+			gpios = <&gpe 27 GPIO_ACTIVE_LOW>;
+		};
+
+		button@7 {
+			label = "Button X";
+			linux,code = <KEY_LEFTSHIFT>;
+			linux,can-disable;
+			gpios = <&gpe 28 GPIO_ACTIVE_LOW>;
+		};
+
+		button@8 {
+			label = "Left shoulder button";
+			linux,code = <KEY_TAB>;
+			linux,can-disable;
+			gpios = <&gpb 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button@9 {
+			label = "Right shoulder button";
+			linux,code = <KEY_BACKSPACE>;
+			linux,can-disable;
+			gpios = <&gpe 26 GPIO_ACTIVE_LOW>;
+		};
+
+		button@10 {
+			label = "Start button";
+			linux,code = <KEY_ENTER>;
+			linux,can-disable;
+			gpios = <&gpb 21 GPIO_ACTIVE_LOW>;
+		};
+
+		button@11 {
+			label = "Select button";
+			linux,code = <KEY_ESC>;
+			linux,can-disable;
+			/*
+			 * This is the only button that is active high,
+			 * since it doubles as BOOT_SEL1.
+			 */
+			gpios = <&gpd 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@12 {
+			label = "Power slider";
+			linux,code = <KEY_POWER>;
+			linux,can-disable;
+			gpios = <&gpa 30 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button@13 {
+			label = "Power hold";
+			linux,code = <KEY_PAUSE>;
+			linux,can-disable;
+			gpios = <&gpf 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c3: i2c-controller@3 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpd 5 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpd 4 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>; /* 250 kHz */
+
+		act8600: pmic@5a {
+			compatible = "active-semi,act8600";
+			reg = <0x5a>;
+
+			regulators {
+				/* USB OTG */
+				otg_vbus: SUDCDC_REG4 {
+					/*
+					 * 5.3V instead of 5.0V to compensate
+					 * for the voltage drop of a diode
+					 * between the regulator and the
+					 * connector.
+					 */
+					regulator-min-microvolt = <5300000>;
+					regulator-max-microvolt = <5300000>;
+					inl-supply = <&vcc>;
+				};
+
+				/*
+				 * When this is off, there is no sound, but also
+				 * no USB networking.
+				 */
+				ldo5: LDO5 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					inl-supply = <&vcc>;
+				};
+
+				/* LCD panel and FM radio */
+				ldo6: LDO6 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					inl-supply = <&vcc>;
+				};
+
+				/* ??? */
+				LDO7 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					/*regulator-always-on;*/
+					inl-supply = <&vcc>;
+				};
+
+				/*
+				 * The colors on the LCD are wrong when this is
+				 * off. Which is strange, since the LCD panel
+				 * data sheet only mentions a 3.3V input.
+				 */
+				LDO8 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					inl-supply = <&vcc>;
+				};
+
+				/* RTC fixed 3.3V */
+				LDO_REG9 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					inl-supply = <&vcc>;
+				};
+
+				/* Unused fixed 1.2V */
+				LDO_REG10 {
+					inl-supply = <&vcc>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&gpb 30 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
 		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpe 15 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpe 17 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpe 16 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		nt39016@0 {
+			compatible = "kingdisplay,kd035g6-54nt";
+			reg = <0>;
+
+			spi-max-frequency = <3125000>;
+			spi-3wire;
+			spi-cs-high;
+
+			reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
 
-		otg_phy: otg-phy {
-			compatible = "usb-nop-xceiv";
-			clocks = <&cgu JZ4770_CLK_OTG_PHY>;
-			clock-names = "main_clk";
+			backlight = <&backlight>;
+			power-supply = <&ldo6>;
+
+			port {
+				panel_input: endpoint {
+					remote-endpoint = <&panel_output>;
+				};
+			};
+		};
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		label = "mini-USB";
+		type = "mini";
+
+		/*
+		 * USB OTG is not yet working reliably, the ID detection
+		 * mechanism tends to fry easily for unknown reasons.
+		 * Until this is fixed, disable OTG by not providing the
+		 * ID GPIO to the driver.
+		 */
+		//id-gpios = <&gpf 18 GPIO_ACTIVE_LOW>;
+
+		vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&otg_vbus>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_otg>;
+
+		port {
+			usb_ep: endpoint {
+				remote-endpoint = <&usb_otg_ep>;
+			};
 		};
 	};
 };
@@ -37,24 +385,86 @@ &ext {
 	clock-frequency = <12000000>;
 };
 
+&pinctrl {
+	pins_lcd: lcd {
+		function = "lcd";
+		groups = "lcd-24bit";
+	};
+
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data";
+	};
+
+	pins_mmc0: mmc0 {
+		function = "mmc0";
+		groups = "mmc0-1bit-a", "mmc0-4bit-a";
+	};
+
+	pins_mmc1: mmc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit-d", "mmc1-4bit-d";
+	};
+
+	pins_otg: otg {
+		otg-vbus-pin {
+			function = "otg";
+			groups = "otg-vbus";
+		};
+
+		vbus-pin {
+			pins = "PB5";
+			bias-disable;
+		};
+	};
+
+	pins_pwm1: pwm1 {
+		function = "pwm1";
+		groups = "pwm1";
+	};
+
+	pins_pwm4: pwm4 {
+		function = "pwm4";
+		groups = "pwm4";
+	};
+};
+
 &uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+
 	status = "okay";
 };
 
 &cgu {
-	/* Put high-speed peripherals under PLL1, such that we can change the
+	/*
+	 * Put high-speed peripherals under PLL1, such that we can change the
 	 * PLL0 frequency on demand without having to suspend peripherals.
 	 * We use a rate of 432 MHz, which is the least common multiple of
 	 * 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+	 * Put the GPU under PLL0 since we want a higher frequency.
+	 * Use the 32 kHz oscillator as the parent of the RTC for a higher
+	 * precision.
 	 */
 	assigned-clocks =
 		<&cgu JZ4770_CLK_PLL1>,
-		<&cgu JZ4770_CLK_UHC>;
+		<&cgu JZ4770_CLK_GPU>,
+		<&cgu JZ4770_CLK_RTC>,
+		<&cgu JZ4770_CLK_UHC>,
+		<&cgu JZ4770_CLK_LPCLK_MUX>,
+		<&cgu JZ4770_CLK_MMC0_MUX>,
+		<&cgu JZ4770_CLK_MMC1_MUX>;
 	assigned-clock-parents =
 		<0>,
+		<&cgu JZ4770_CLK_PLL0>,
+		<&cgu JZ4770_CLK_OSC32K>,
+		<&cgu JZ4770_CLK_PLL1>,
+		<&cgu JZ4770_CLK_PLL1>,
+		<&cgu JZ4770_CLK_PLL1>,
 		<&cgu JZ4770_CLK_PLL1>;
 	assigned-clock-rates =
-		<432000000>;
+		<432000000>,
+		<600000000>;
 };
 
 &uhc {
@@ -63,10 +473,69 @@ &uhc {
 };
 
 &tcu {
-	/* 750 kHz for the system timer and clocksource */
-	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
-	assigned-clock-rates = <750000>, <750000>;
+	/*
+	 * 750 kHz for the system timer and clocksource, 12 MHz for the OST,
+	 * and use RTC as the parent for the watchdog clock
+	 */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>,
+			  <&tcu TCU_CLK_OST>, <&tcu TCU_CLK_WDT>;
+	assigned-clock-parents = <0>, <0>, <0>, <&cgu JZ4770_CLK_RTC>;
+	assigned-clock-rates = <750000>, <750000>, <12000000>;
 
-	/* PWM1 is in use, so reserve channel #2 for the clocksource */
+	/* PWM1 is in use, so use channel #2 for the clocksource */
 	ingenic,pwm-channels-mask = <0xfa>;
 };
+
+&usb_otg {
+	port {
+		usb_otg_ep: endpoint {
+			remote-endpoint = <&usb_ep>;
+		};
+	};
+};
+
+&otg_phy {
+	vcc-supply = <&ldo5>;
+};
+
+&rtc {
+	clocks = <&cgu JZ4770_CLK_RTC>;
+	clock-names = "rtc";
+
+	system-power-controller;
+};
+
+&mmc0 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <48000000>;
+	vmmc-supply = <&vcc>;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc0>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <48000000>;
+	cd-gpios = <&gpb 2 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mmc1_power>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc1>;
+};
+
+&lcd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_lcd>;
+
+	port {
+		panel_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index a3301bab9231..1520585c235c 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -55,10 +55,10 @@ tcu: timer@10002000 {
 
 		#clock-cells = <1>;
 
-		clocks = <&cgu JZ4740_CLK_RTC
-			  &cgu JZ4740_CLK_EXT
-			  &cgu JZ4740_CLK_PCLK
-			  &cgu JZ4740_CLK_TCU>;
+		clocks = <&cgu JZ4740_CLK_RTC>,
+			 <&cgu JZ4740_CLK_EXT>,
+			 <&cgu JZ4740_CLK_PCLK>,
+			 <&cgu JZ4740_CLK_TCU>;
 		clock-names = "rtc", "ext", "pclk", "tcu";
 
 		interrupt-controller;
@@ -74,6 +74,20 @@ watchdog: watchdog@0 {
 			clocks = <&tcu TCU_CLK_WDT>;
 			clock-names = "wdt";
 		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,jz4740-pwm";
+			reg = <0x40 0x80>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+				 <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+				      "timer4", "timer5", "timer6", "timer7";
+		};
 	};
 
 	rtc_dev: rtc@10003000 {
@@ -241,10 +255,10 @@ nemc: memory-controller@13010000 {
 		reg = <0x13010000 0x54>;
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <1 0 0x18000000 0x4000000
-			  2 0 0x14000000 0x4000000
-			  3 0 0x0c000000 0x4000000
-			  4 0 0x08000000 0x4000000>;
+		ranges = <1 0 0x18000000 0x4000000>,
+			 <2 0 0x14000000 0x4000000>,
+			 <3 0 0x0c000000 0x4000000>,
+			 <4 0 0x08000000 0x4000000>;
 
 		clocks = <&cgu JZ4740_CLK_MCLK>;
 	};
@@ -258,8 +272,7 @@ ecc: ecc-controller@13010100 {
 
 	dmac: dma-controller@13020000 {
 		compatible = "ingenic,jz4740-dma";
-		reg = <0x13020000 0xbc
-		       0x13020300 0x14>;
+		reg = <0x13020000 0xbc>, <0x13020300 0x14>;
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 0bfb9edff3d0..fa11ac950499 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
 
 / {
 	#address-cells = <1>;
@@ -37,13 +38,25 @@ osc32k: osc32k {
 	};
 
 	cgu: jz4770-cgu@10000000 {
-		compatible = "ingenic,jz4770-cgu";
+		compatible = "ingenic,jz4770-cgu", "simple-mfd";
 		reg = <0x10000000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10000000 0x100>;
 
 		clocks = <&ext>, <&osc32k>;
 		clock-names = "ext", "osc32k";
 
 		#clock-cells = <1>;
+
+		otg_phy: usb-phy@3c {
+			compatible = "ingenic,jz4770-phy";
+			reg = <0x3c 0x10>;
+
+			clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+			#phy-cells = <0>;
+		};
 	};
 
 	tcu: timer@10002000 {
@@ -55,9 +68,9 @@ tcu: timer@10002000 {
 
 		#clock-cells = <1>;
 
-		clocks = <&cgu JZ4770_CLK_RTC
-			  &cgu JZ4770_CLK_EXT
-			  &cgu JZ4770_CLK_PCLK>;
+		clocks = <&cgu JZ4770_CLK_RTC>,
+			 <&cgu JZ4770_CLK_EXT>,
+			 <&cgu JZ4770_CLK_PCLK>;
 		clock-names = "rtc", "ext", "pclk";
 
 		interrupt-controller;
@@ -65,6 +78,47 @@ &cgu JZ4770_CLK_EXT
 
 		interrupt-parent = <&intc>;
 		interrupts = <27 26 25>;
+
+		watchdog: watchdog@0 {
+			compatible = "ingenic,jz4770-watchdog",
+				     "ingenic,jz4740-watchdog";
+			reg = <0x0 0xc>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+			reg = <0x40 0x80>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+				 <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+				      "timer4", "timer5", "timer6", "timer7";
+		};
+
+		ost: timer@e0 {
+			compatible = "ingenic,jz4770-ost";
+			reg = <0xe0 0x20>;
+
+			clocks = <&tcu TCU_CLK_OST>;
+			clock-names = "ost";
+
+			interrupts = <15>;
+		};
+	};
+
+	rtc: rtc@10003000 {
+		compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
+		reg = <0x10003000 0x40>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
 	};
 
 	pinctrl: pin-controller@10010000 {
@@ -165,6 +219,93 @@ gpf: gpio@5 {
 		};
 	};
 
+	aic: audio-controller@10020000 {
+		compatible = "ingenic,jz4770-i2s";
+		reg = <0x10020000 0x94>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>,
+			 <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>;
+		clock-names = "aic", "i2s", "ext", "pll half";
+
+		interrupt-parent = <&intc>;
+		interrupts = <34>;
+
+		dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
+		dma-names = "rx", "tx";
+	};
+
+	codec: audio-codec@100200a0 {
+		compatible = "ingenic,jz4770-codec";
+		reg = <0x100200a4 0x8>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4770_CLK_AIC>;
+		clock-names = "aic";
+	};
+
+	mmc0: mmc@10021000 {
+		compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+		reg = <0x10021000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_MMC0>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		status = "disabled";
+	};
+
+	mmc1: mmc@10022000 {
+		compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+		reg = <0x10022000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_MMC1>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		status = "disabled";
+	};
+
+	mmc2: mmc@10023000 {
+		compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+		reg = <0x10023000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_MMC2>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <35>;
+
+		dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		status = "disabled";
+	};
+
 	uart0: serial@10030000 {
 		compatible = "ingenic,jz4770-uart";
 		reg = <0x10030000 0x100>;
@@ -217,34 +358,63 @@ uart3: serial@10033000 {
 		status = "disabled";
 	};
 
+	adc: adc@10070000 {
+		compatible = "ingenic,jz4770-adc";
+		reg = <0x10070000 0x30>;
+
+		#io-channel-cells = <1>;
+
+		clocks = <&cgu JZ4770_CLK_ADC>;
+		clock-names = "adc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+	gpu: gpu@13040000 {
+		compatible = "vivante,gc";
+		reg = <0x13040000 0x10000>;
+
+		clocks = <&cgu JZ4770_CLK_GPU>,
+			 <&cgu JZ4770_CLK_GPU>,
+			 <&cgu JZ4770_CLK_GPU>;
+		clock-names = "bus", "core", "shader";
+
+		interrupt-parent = <&intc>;
+		interrupts = <6>;
+	};
+
+	lcd: lcd-controller@13050000 {
+		compatible = "ingenic,jz4770-lcd";
+		reg = <0x13050000 0x300>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <31>;
+
+		clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
+		clock-names = "lcd_pclk";
+	};
+
 	dmac0: dma-controller@13420000 {
 		compatible = "ingenic,jz4770-dma";
-		reg = <0x13420000 0xC0
-		       0x13420300 0x20>;
+		reg = <0x13420000 0xC0>, <0x13420300 0x20>;
 
-		#dma-cells = <1>;
+		#dma-cells = <2>;
 
 		clocks = <&cgu JZ4770_CLK_DMA>;
 		interrupt-parent = <&intc>;
 		interrupts = <24>;
-
-		/* Disable dmac0 until we have something that uses it */
-		status = "disabled";
 	};
 
 	dmac1: dma-controller@13420100 {
 		compatible = "ingenic,jz4770-dma";
-		reg = <0x13420100 0xC0
-		       0x13420400 0x20>;
+		reg = <0x13420100 0xC0>, <0x13420400 0x20>;
 
-		#dma-cells = <1>;
+		#dma-cells = <2>;
 
 		clocks = <&cgu JZ4770_CLK_DMA>;
 		interrupt-parent = <&intc>;
 		interrupts = <23>;
-
-		/* Disable dmac1 until we have something that uses it */
-		status = "disabled";
 	};
 
 	uhc: uhc@13430000 {
@@ -260,4 +430,29 @@ uhc: uhc@13430000 {
 
 		status = "disabled";
 	};
+
+	usb_otg: usb@13440000 {
+		compatible = "ingenic,jz4770-musb";
+		reg = <0x13440000 0x10000>;
+
+		clocks = <&cgu JZ4770_CLK_OTG>;
+		clock-names = "udc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <21>;
+		interrupt-names = "mc";
+
+		phys = <&otg_phy>;
+
+		usb-role-switch;
+	};
+
+	rom: memory@1fc00000 {
+		compatible = "mtd-rom";
+		probe-type = "map_rom";
+		reg = <0x1fc00000 0x2000>;
+
+		bank-width = <4>;
+		device-width = <1>;
+	};
 };
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index bb89653d16a3..b7f409a7cf5d 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -58,9 +58,9 @@ tcu: timer@10002000 {
 
 		#clock-cells = <1>;
 
-		clocks = <&cgu JZ4780_CLK_RTCLK
-			  &cgu JZ4780_CLK_EXCLK
-			  &cgu JZ4780_CLK_PCLK>;
+		clocks = <&cgu JZ4780_CLK_RTCLK>,
+			 <&cgu JZ4780_CLK_EXCLK>,
+			 <&cgu JZ4780_CLK_PCLK>;
 		clock-names = "rtc", "ext", "pclk";
 
 		interrupt-controller;
@@ -76,6 +76,30 @@ watchdog: watchdog@0 {
 			clocks = <&tcu TCU_CLK_WDT>;
 			clock-names = "wdt";
 		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm";
+			reg = <0x40 0x80>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+				 <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+				      "timer4", "timer5", "timer6", "timer7";
+		};
+
+		ost: timer@e0 {
+			compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost";
+			reg = <0xe0 0x20>;
+
+			clocks = <&tcu TCU_CLK_OST>;
+			clock-names = "ost";
+
+			interrupts = <15>;
+		};
 	};
 
 	rtc_dev: rtc@10003000 {
@@ -196,8 +220,7 @@ spi_gpio {
 		gpio-miso = <&gpe 14 0>;
 		gpio-sck = <&gpe 15 0>;
 		gpio-mosi = <&gpe 17 0>;
-		cs-gpios = <&gpe 16 0
-			    &gpe 18 0>;
+		cs-gpios = <&gpe 16 0>, <&gpe 18 0>;
 
 		spidev@0 {
 			compatible = "spidev";
@@ -358,26 +381,40 @@ i2c4: i2c@10054000 {
 	};
 
 	nemc: nemc@13410000 {
-		compatible = "ingenic,jz4780-nemc";
+		compatible = "ingenic,jz4780-nemc", "simple-mfd";
 		reg = <0x13410000 0x10000>;
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <1 0 0x1b000000 0x1000000
-			  2 0 0x1a000000 0x1000000
-			  3 0 0x19000000 0x1000000
-			  4 0 0x18000000 0x1000000
-			  5 0 0x17000000 0x1000000
-			  6 0 0x16000000 0x1000000>;
+		ranges = <0 0 0x13410000 0x10000>,
+			 <1 0 0x1b000000 0x1000000>,
+			 <2 0 0x1a000000 0x1000000>,
+			 <3 0 0x19000000 0x1000000>,
+			 <4 0 0x18000000 0x1000000>,
+			 <5 0 0x17000000 0x1000000>,
+			 <6 0 0x16000000 0x1000000>;
 
 		clocks = <&cgu JZ4780_CLK_NEMC>;
 
 		status = "disabled";
+
+		efuse: efuse@d0 {
+			reg = <0 0xd0 0x30>;
+			compatible = "ingenic,jz4780-efuse";
+
+			clocks = <&cgu JZ4780_CLK_AHB2>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_addr: eth-mac-addr@0x22 {
+				reg = <0x22 0x6>;
+			};
+		};
 	};
 
 	dma: dma@13420000 {
 		compatible = "ingenic,jz4780-dma";
-		reg = <0x13420000 0x400
-		       0x13421000 0x40>;
+		reg = <0x13420000 0x400>, <0x13421000 0x40>;
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 147f7d5c243a..59a63a0985a8 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -58,9 +58,9 @@ tcu: timer@10002000 {
 
 		#clock-cells = <1>;
 
-		clocks = <&cgu X1000_CLK_RTCLK
-			  &cgu X1000_CLK_EXCLK
-			  &cgu X1000_CLK_PCLK>;
+		clocks = <&cgu X1000_CLK_RTCLK>,
+			 <&cgu X1000_CLK_EXCLK>,
+			 <&cgu X1000_CLK_PCLK>;
 		clock-names = "rtc", "ext", "pclk";
 
 		interrupt-controller;
@@ -239,8 +239,7 @@ uart2: serial@10032000 {
 
 	pdma: dma-controller@13420000 {
 		compatible = "ingenic,x1000-dma";
-		reg = <0x13420000 0x400
-			   0x13421000 0x40>;
+		reg = <0x13420000 0x400>, <0x13421000 0x40>;
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
index 45c54d555fa4..8687c4f7370a 100644
--- a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
@@ -21,6 +21,11 @@ rtc0: rtc@70 {
 				interrupts = <8>;
 				interrupt-parent = <&htpic>;
 			};
+
+			acpi@800 {
+				compatible = "loongson,rs780e-acpi";
+				reg = <1 0x800 0x100>;
+			};
 		};
 	};
 };
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index 0db0088bbc1c..e511fe0243a5 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_MODULES=y
 CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -29,6 +28,7 @@ CONFIG_HIGHMEM=y
 CONFIG_HZ_100=y
 # CONFIG_SECCOMP is not set
 # CONFIG_SUSPEND is not set
+CONFIG_MODULES=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_COMPACTION is not set
 CONFIG_CMA=y
@@ -38,17 +38,12 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_ALLOW_DEV_COREDUMP is not set
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_JZ4780=y
@@ -72,9 +67,8 @@ CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_LEGACY_PTY_COUNT=2
 CONFIG_SERIAL_8250=y
@@ -89,7 +83,7 @@ CONFIG_I2C_JZ4780=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_KEYBOARD_GPIO=m
+CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_JZ4740_WDT=y
@@ -97,17 +91,45 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ACT8865=y
+CONFIG_RC_CORE=m
+CONFIG_LIRC=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=m
+CONFIG_IR_GPIO_TX=m
+CONFIG_MEDIA_SUPPORT=m
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_JZ4740=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_MTD=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_ACTIVITY=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=m
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGER_PATTERN=y
+CONFIG_LEDS_TRIGGER_AUDIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_JZ4740=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_JZ4780=y
+CONFIG_INGENIC_OST=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
+CONFIG_PWM=y
+CONFIG_PWM_JZ4740=m
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_PROC_KCORE=y
@@ -156,11 +178,13 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
@@ -169,21 +193,3 @@ CONFIG_STACKTRACE=y
 # CONFIG_FTRACE is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_MTD=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_LEDS_TRIGGER_CAMERA=m
-CONFIG_LIRC=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_RC_DEVICES=y
-CONFIG_IR_GPIO_CIR=m
-CONFIG_IR_GPIO_TX=m
diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig
index a3e3eb3c5a8b..48131cb47e66 100644
--- a/arch/mips/configs/gcw0_defconfig
+++ b/arch/mips/configs/gcw0_defconfig
@@ -1,27 +1,152 @@
+CONFIG_DEFAULT_HOSTNAME="gcw0"
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
 CONFIG_MACH_INGENIC=y
 CONFIG_JZ4770_GCW0=y
 CONFIG_HIGHMEM=y
 # CONFIG_SECCOMP is not set
-# CONFIG_SUSPEND is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_CMDLINE_DTB_EXTEND=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BOUNCE is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
 CONFIG_NETDEVICES=y
+# CONFIG_ETHERNET is not set
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
+# CONFIG_WLAN_VENDOR_ATH is not set
+# CONFIG_WLAN_VENDOR_ATMEL is not set
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
+# CONFIG_WLAN_VENDOR_CISCO is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+# CONFIG_WLAN_VENDOR_MEDIATEK is not set
+# CONFIG_WLAN_VENDOR_RALINK is not set
+CONFIG_RTL8192CU=m
+# CONFIG_RTLWIFI_DEBUG is not set
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_ST is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
+# CONFIG_WLAN_VENDOR_QUANTENNA is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_INPUT_PWM_VIBRA=y
+# CONFIG_SERIO is not set
 CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_JZ4740_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ACT8865=y
+CONFIG_DRM=y
+CONFIG_DRM_FBDEV_OVERALLOC=300
+CONFIG_DRM_PANEL_NOVATEK_NT39016=y
+CONFIG_DRM_INGENIC=y
+CONFIG_DRM_ETNAVIV=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_PROC_FS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_JZ4740_SOC_I2S=y
+CONFIG_SND_SOC_JZ4770_CODEC=y
+CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_USB_CONN_GPIO=y
 CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_TMPFS=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_JZ4740=y
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_JZ4770_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_ETH=y
+CONFIG_MMC=y
+# CONFIG_PWRSEQ_EMMC is not set
+# CONFIG_PWRSEQ_SIMPLE is not set
+CONFIG_MMC_JZ4740=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_DRV_JZ4740=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_JZ4780=y
+# CONFIG_VIRTIO_MENU is not set
+CONFIG_STAGING=y
+CONFIG_R8188EU=m
+CONFIG_INGENIC_OST=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_BUFFER_CB=y
+CONFIG_IIO_KFIFO_BUF=y
+CONFIG_MXC6255=m
+CONFIG_INGENIC_ADC=y
+CONFIG_PWM=y
+CONFIG_PWM_JZ4740=y
+CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_DIRECT=y
+CONFIG_SQUASHFS_DECOMP_MULTI=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x10=y
+CONFIG_DEBUG_FS=y
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 51675f5000d6..6768c1682671 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -21,6 +21,7 @@ CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_MACH_LOONGSON64=y
 CONFIG_SMP=y
 CONFIG_HZ_256=y
diff --git a/arch/mips/include/asm/asm-eva.h b/arch/mips/include/asm/asm-eva.h
index d80be38c4144..e327ebc76753 100644
--- a/arch/mips/include/asm/asm-eva.h
+++ b/arch/mips/include/asm/asm-eva.h
@@ -180,7 +180,7 @@
 #define user_ld(reg, addr)		kernel_lw(reg, addr)
 #else
 #define user_sd(reg, addr)		kernel_sd(reg, addr)
-#define user_ld(reg, addr)		kernel_sd(reg, addr)
+#define user_ld(reg, addr)		kernel_ld(reg, addr)
 #endif /* CONFIG_32BIT */
 
 #endif /* CONFIG_EVA */
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
index c23527ba65d0..934465de470e 100644
--- a/arch/mips/include/asm/asm.h
+++ b/arch/mips/include/asm/asm.h
@@ -202,7 +202,9 @@ symbol		=	value
 #define LONG_SRA	sra
 #define LONG_SRAV	srav
 
+#ifdef __ASSEMBLY__
 #define LONG		.word
+#endif
 #define LONGSIZE	4
 #define LONGMASK	3
 #define LONGLOG		2
@@ -225,7 +227,9 @@ symbol		=	value
 #define LONG_SRA	dsra
 #define LONG_SRAV	dsrav
 
+#ifdef __ASSEMBLY__
 #define LONG		.dword
+#endif
 #define LONGSIZE	8
 #define LONGMASK	7
 #define LONGLOG		3
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index 61727785a247..dcd6a75277d1 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -121,7 +121,7 @@ extern unsigned long fw_passed_dtb;
 #endif
 
 /*
- * Platform memory detection hook called by setup_arch
+ * Platform memory detection hook called by arch_mem_init()
  */
 extern void plat_mem_setup(void);
 
diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h
index da80878f2c0d..fa3dcbf56fa9 100644
--- a/arch/mips/include/asm/branch.h
+++ b/arch/mips/include/asm/branch.h
@@ -27,6 +27,9 @@ extern int __MIPS16e_compute_return_epc(struct pt_regs *regs);
 #define MM_POOL32A_MINOR_SHIFT	0x6
 #define MM_MIPS32_COND_FC	0x30
 
+int isBranchInstr(struct pt_regs *regs,
+	struct mm_decoded_insn dec_insn, unsigned long *contpc);
+
 extern int __mm_isBranchInstr(struct pt_regs *regs,
 	struct mm_decoded_insn dec_insn, unsigned long *contpc);
 
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index 8031fbc6b69a..50253efecb56 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -48,7 +48,7 @@
  * R4000-specific cacheops
  */
 #define Create_Dirty_Excl_D		(Cache_D | 0x0c)
-#define Fill				(Cache_I | 0x14)
+#define Fill_I				(Cache_I | 0x14)
 #define Hit_Writeback_I			(Cache_I | Hit_Writeback)
 #define Hit_Writeback_D			(Cache_D | Hit_Writeback)
 
diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h
deleted file mode 100644
index 5a8f96ebe5fa..000000000000
--- a/arch/mips/include/asm/clock.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MIPS_CLOCK_H
-#define __ASM_MIPS_CLOCK_H
-
-#include <linux/kref.h>
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/clk.h>
-
-struct clk;
-
-struct clk_ops {
-	void (*init) (struct clk *clk);
-	void (*enable) (struct clk *clk);
-	void (*disable) (struct clk *clk);
-	void (*recalc) (struct clk *clk);
-	int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id);
-	long (*round_rate) (struct clk *clk, unsigned long rate);
-};
-
-struct clk {
-	struct list_head node;
-	const char *name;
-	int id;
-	struct module *owner;
-
-	struct clk *parent;
-	struct clk_ops *ops;
-
-	struct kref kref;
-
-	unsigned long rate;
-	unsigned long flags;
-};
-
-#define CLK_ALWAYS_ENABLED	(1 << 0)
-#define CLK_RATE_PROPAGATES	(1 << 1)
-
-int clk_init(void);
-
-int __clk_enable(struct clk *);
-void __clk_disable(struct clk *);
-
-void clk_recalc_rate(struct clk *);
-
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-
-#endif				/* __ASM_MIPS_CLOCK_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index de44c92b1c1f..400b123cb6da 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -435,9 +435,6 @@
 # ifndef cpu_has_64bit_gp_regs
 # define cpu_has_64bit_gp_regs		0
 # endif
-# ifndef cpu_has_64bit_addresses
-# define cpu_has_64bit_addresses	0
-# endif
 # ifndef cpu_vmbits
 # define cpu_vmbits 31
 # endif
@@ -456,9 +453,6 @@
 # ifndef cpu_has_64bit_gp_regs
 # define cpu_has_64bit_gp_regs		1
 # endif
-# ifndef cpu_has_64bit_addresses
-# define cpu_has_64bit_addresses	1
-# endif
 # ifndef cpu_vmbits
 # define cpu_vmbits cpu_data[0].vmbits
 # define __NEED_VMBITS_PROBE
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 216a22916740..46c190e78acf 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -250,6 +250,10 @@
 #define PRID_REV_LOONGSON1C		0x0020	/* Same as Loongson-1B */
 #define PRID_REV_LOONGSON2E		0x0002
 #define PRID_REV_LOONGSON2F		0x0003
+#define PRID_REV_LOONGSON2K_R1_0	0x0000
+#define PRID_REV_LOONGSON2K_R1_1	0x0001
+#define PRID_REV_LOONGSON2K_R1_2	0x0002
+#define PRID_REV_LOONGSON2K_R1_3	0x0003
 #define PRID_REV_LOONGSON3A_R1		0x0005
 #define PRID_REV_LOONGSON3B_R1		0x0006
 #define PRID_REV_LOONGSON3B_R2		0x0007
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index bb7c71ffe5b7..f67759e81210 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -172,10 +172,6 @@ void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
 		     struct task_struct *tsk);
 int process_fpemu_return(int sig, void __user *fault_addr,
 			 unsigned long fcr31);
-int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
-		  unsigned long *contpc);
-int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
-		     unsigned long *contpc);
 
 /*
  * Mask the FCSR Cause bits according to the Enable bits, observing
diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h
index 22912f78401c..82545454ad3e 100644
--- a/arch/mips/include/asm/inst.h
+++ b/arch/mips/include/asm/inst.h
@@ -11,6 +11,7 @@
 #ifndef _ASM_INST_H
 #define _ASM_INST_H
 
+#include <asm/asm.h>
 #include <uapi/asm/inst.h>
 
 /* HACHACHAHCAHC ...  */
@@ -85,4 +86,776 @@ struct mm_decoded_insn {
 /* Recode table from 16-bit register notation to 32-bit GPR. Do NOT export!!! */
 extern const int reg16to32[];
 
+#ifdef __BIG_ENDIAN
+#define  _LoadHW(addr, value, res, type)  \
+do {                                                \
+	__asm__ __volatile__ (".set\tnoat\n"        \
+		"1:\t"type##_lb("%0", "0(%2)")"\n"  \
+		"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
+		"sll\t%0, 0x8\n\t"                  \
+		"or\t%0, $1\n\t"                    \
+		"li\t%1, 0\n"                       \
+		"3:\t.set\tat\n\t"                  \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define  _LoadW(addr, value, res, type)   \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\t"type##_lwl("%0", "(%2)")"\n"   \
+		"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
+		"li\t%1, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without lwl instruction */
+#define  _LoadW(addr, value, res, type) \
+do {                                                \
+	__asm__ __volatile__ (			    \
+		".set\tpush\n"			    \
+		".set\tnoat\n\t"		    \
+		"1:"type##_lb("%0", "0(%2)")"\n\t"  \
+		"2:"type##_lbu("$1", "1(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"3:"type##_lbu("$1", "2(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"4:"type##_lbu("$1", "3(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"li\t%1, 0\n"			    \
+		".set\tpop\n"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%1, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (value), "=r" (res)	    \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+#define  _LoadHWU(addr, value, res, type) \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		".set\tnoat\n"                      \
+		"1:\t"type##_lbu("%0", "0(%2)")"\n" \
+		"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
+		"sll\t%0, 0x8\n\t"                  \
+		"or\t%0, $1\n\t"                    \
+		"li\t%1, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".set\tat\n\t"                      \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define  _LoadWU(addr, value, res, type)  \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\t"type##_lwl("%0", "(%2)")"\n"  \
+		"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
+		"dsll\t%0, %0, 32\n\t"              \
+		"dsrl\t%0, %0, 32\n\t"              \
+		"li\t%1, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		"\t.section\t.fixup,\"ax\"\n\t"     \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#define  _LoadDW(addr, value, res)  \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\tldl\t%0, (%2)\n"               \
+		"2:\tldr\t%0, 7(%2)\n\t"            \
+		"li\t%1, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		"\t.section\t.fixup,\"ax\"\n\t"     \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without lwl and ldl instructions */
+#define  _LoadWU(addr, value, res, type) \
+do {                                                \
+	__asm__ __volatile__ (			    \
+		".set\tpush\n\t"		    \
+		".set\tnoat\n\t"		    \
+		"1:"type##_lbu("%0", "0(%2)")"\n\t" \
+		"2:"type##_lbu("$1", "1(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"3:"type##_lbu("$1", "2(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"4:"type##_lbu("$1", "3(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"li\t%1, 0\n"			    \
+		".set\tpop\n"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%1, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (value), "=r" (res)	    \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#define  _LoadDW(addr, value, res)  \
+do {                                                \
+	__asm__ __volatile__ (			    \
+		".set\tpush\n\t"		    \
+		".set\tnoat\n\t"		    \
+		"1:lb\t%0, 0(%2)\n\t"		    \
+		"2:lbu\t $1, 1(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"3:lbu\t$1, 2(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"4:lbu\t$1, 3(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"5:lbu\t$1, 4(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"6:lbu\t$1, 5(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"7:lbu\t$1, 6(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"8:lbu\t$1, 7(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"li\t%1, 0\n"			    \
+		".set\tpop\n\t"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%1, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR)"\t5b, 11b\n\t"		    \
+		STR(PTR)"\t6b, 11b\n\t"		    \
+		STR(PTR)"\t7b, 11b\n\t"		    \
+		STR(PTR)"\t8b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (value), "=r" (res)	    \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+
+#define  _StoreHW(addr, value, res, type) \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		".set\tnoat\n"                      \
+		"1:\t"type##_sb("%1", "1(%2)")"\n"  \
+		"srl\t$1, %1, 0x8\n"                \
+		"2:\t"type##_sb("$1", "0(%2)")"\n"  \
+		".set\tat\n\t"                      \
+		"li\t%0, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%0, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=r" (res)                        \
+		: "r" (value), "r" (addr), "i" (-EFAULT));\
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define  _StoreW(addr, value, res, type)  \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\t"type##_swl("%1", "(%2)")"\n"  \
+		"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
+		"li\t%0, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%0, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=r" (res)                                \
+		: "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while (0)
+
+#define  _StoreDW(addr, value, res) \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\tsdl\t%1,(%2)\n"                \
+		"2:\tsdr\t%1, 7(%2)\n\t"            \
+		"li\t%0, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%0, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=r" (res)                                \
+		: "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+#define  _StoreW(addr, value, res, type)  \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		".set\tpush\n\t"		    \
+		".set\tnoat\n\t"		    \
+		"1:"type##_sb("%1", "3(%2)")"\n\t"  \
+		"srl\t$1, %1, 0x8\n\t"		    \
+		"2:"type##_sb("$1", "2(%2)")"\n\t"  \
+		"srl\t$1, $1,  0x8\n\t"		    \
+		"3:"type##_sb("$1", "1(%2)")"\n\t"  \
+		"srl\t$1, $1, 0x8\n\t"		    \
+		"4:"type##_sb("$1", "0(%2)")"\n\t"  \
+		".set\tpop\n\t"			    \
+		"li\t%0, 0\n"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%0, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (res)				    \
+		: "r" (value), "r" (addr), "i" (-EFAULT)    \
+		: "memory");                                \
+} while (0)
+
+#define  _StoreDW(addr, value, res) \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		".set\tpush\n\t"		    \
+		".set\tnoat\n\t"		    \
+		"1:sb\t%1, 7(%2)\n\t"		    \
+		"dsrl\t$1, %1, 0x8\n\t"		    \
+		"2:sb\t$1, 6(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"3:sb\t$1, 5(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"4:sb\t$1, 4(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"5:sb\t$1, 3(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"6:sb\t$1, 2(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"7:sb\t$1, 1(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"8:sb\t$1, 0(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		".set\tpop\n\t"			    \
+		"li\t%0, 0\n"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%0, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR)"\t5b, 11b\n\t"		    \
+		STR(PTR)"\t6b, 11b\n\t"		    \
+		STR(PTR)"\t7b, 11b\n\t"		    \
+		STR(PTR)"\t8b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (res)				    \
+		: "r" (value), "r" (addr), "i" (-EFAULT)    \
+		: "memory");                                \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+#else /* __BIG_ENDIAN */
+
+#define  _LoadHW(addr, value, res, type)  \
+do {                                                \
+	__asm__ __volatile__ (".set\tnoat\n"        \
+		"1:\t"type##_lb("%0", "1(%2)")"\n"  \
+		"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
+		"sll\t%0, 0x8\n\t"                  \
+		"or\t%0, $1\n\t"                    \
+		"li\t%1, 0\n"                       \
+		"3:\t.set\tat\n\t"                  \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define  _LoadW(addr, value, res, type)   \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\t"type##_lwl("%0", "3(%2)")"\n" \
+		"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
+		"li\t%1, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without lwl instruction */
+#define  _LoadW(addr, value, res, type) \
+do {                                                \
+	__asm__ __volatile__ (			    \
+		".set\tpush\n"			    \
+		".set\tnoat\n\t"		    \
+		"1:"type##_lb("%0", "3(%2)")"\n\t"  \
+		"2:"type##_lbu("$1", "2(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"3:"type##_lbu("$1", "1(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"4:"type##_lbu("$1", "0(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"li\t%1, 0\n"			    \
+		".set\tpop\n"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%1, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (value), "=r" (res)	    \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+
+#define  _LoadHWU(addr, value, res, type) \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		".set\tnoat\n"                      \
+		"1:\t"type##_lbu("%0", "1(%2)")"\n" \
+		"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
+		"sll\t%0, 0x8\n\t"                  \
+		"or\t%0, $1\n\t"                    \
+		"li\t%1, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".set\tat\n\t"                      \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define  _LoadWU(addr, value, res, type)  \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\t"type##_lwl("%0", "3(%2)")"\n" \
+		"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
+		"dsll\t%0, %0, 32\n\t"              \
+		"dsrl\t%0, %0, 32\n\t"              \
+		"li\t%1, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		"\t.section\t.fixup,\"ax\"\n\t"     \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#define  _LoadDW(addr, value, res)  \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\tldl\t%0, 7(%2)\n"              \
+		"2:\tldr\t%0, (%2)\n\t"             \
+		"li\t%1, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		"\t.section\t.fixup,\"ax\"\n\t"     \
+		"4:\tli\t%1, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=&r" (value), "=r" (res)         \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without lwl and ldl instructions */
+#define  _LoadWU(addr, value, res, type) \
+do {                                                \
+	__asm__ __volatile__ (			    \
+		".set\tpush\n\t"		    \
+		".set\tnoat\n\t"		    \
+		"1:"type##_lbu("%0", "3(%2)")"\n\t" \
+		"2:"type##_lbu("$1", "2(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"3:"type##_lbu("$1", "1(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"4:"type##_lbu("$1", "0(%2)")"\n\t" \
+		"sll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"li\t%1, 0\n"			    \
+		".set\tpop\n"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%1, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (value), "=r" (res)	    \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+
+#define  _LoadDW(addr, value, res)  \
+do {                                                \
+	__asm__ __volatile__ (			    \
+		".set\tpush\n\t"		    \
+		".set\tnoat\n\t"		    \
+		"1:lb\t%0, 7(%2)\n\t"		    \
+		"2:lbu\t$1, 6(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"3:lbu\t$1, 5(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"4:lbu\t$1, 4(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"5:lbu\t$1, 3(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"6:lbu\t$1, 2(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"7:lbu\t$1, 1(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"8:lbu\t$1, 0(%2)\n\t"		    \
+		"dsll\t%0, 0x8\n\t"		    \
+		"or\t%0, $1\n\t"		    \
+		"li\t%1, 0\n"			    \
+		".set\tpop\n\t"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%1, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR)"\t5b, 11b\n\t"		    \
+		STR(PTR)"\t6b, 11b\n\t"		    \
+		STR(PTR)"\t7b, 11b\n\t"		    \
+		STR(PTR)"\t8b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (value), "=r" (res)	    \
+		: "r" (addr), "i" (-EFAULT));       \
+} while (0)
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+#define  _StoreHW(addr, value, res, type) \
+do {                                                 \
+	__asm__ __volatile__ (                      \
+		".set\tnoat\n"                      \
+		"1:\t"type##_sb("%1", "0(%2)")"\n"  \
+		"srl\t$1,%1, 0x8\n"                 \
+		"2:\t"type##_sb("$1", "1(%2)")"\n"  \
+		".set\tat\n\t"                      \
+		"li\t%0, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%0, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=r" (res)                        \
+		: "r" (value), "r" (addr), "i" (-EFAULT));\
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define  _StoreW(addr, value, res, type)  \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\t"type##_swl("%1", "3(%2)")"\n" \
+		"2:\t"type##_swr("%1", "(%2)")"\n\t"\
+		"li\t%0, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%0, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=r" (res)                                \
+		: "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while (0)
+
+#define  _StoreDW(addr, value, res) \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		"1:\tsdl\t%1, 7(%2)\n"              \
+		"2:\tsdr\t%1, (%2)\n\t"             \
+		"li\t%0, 0\n"                       \
+		"3:\n\t"                            \
+		".insn\n\t"                         \
+		".section\t.fixup,\"ax\"\n\t"       \
+		"4:\tli\t%0, %3\n\t"                \
+		"j\t3b\n\t"                         \
+		".previous\n\t"                     \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 4b\n\t"              \
+		STR(PTR)"\t2b, 4b\n\t"              \
+		".previous"                         \
+		: "=r" (res)                                \
+		: "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without swl and sdl instructions */
+#define  _StoreW(addr, value, res, type)  \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		".set\tpush\n\t"		    \
+		".set\tnoat\n\t"		    \
+		"1:"type##_sb("%1", "0(%2)")"\n\t"  \
+		"srl\t$1, %1, 0x8\n\t"		    \
+		"2:"type##_sb("$1", "1(%2)")"\n\t"  \
+		"srl\t$1, $1,  0x8\n\t"		    \
+		"3:"type##_sb("$1", "2(%2)")"\n\t"  \
+		"srl\t$1, $1, 0x8\n\t"		    \
+		"4:"type##_sb("$1", "3(%2)")"\n\t"  \
+		".set\tpop\n\t"			    \
+		"li\t%0, 0\n"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%0, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (res)				    \
+		: "r" (value), "r" (addr), "i" (-EFAULT)    \
+		: "memory");                                \
+} while (0)
+
+#define  _StoreDW(addr, value, res) \
+do {                                                \
+	__asm__ __volatile__ (                      \
+		".set\tpush\n\t"		    \
+		".set\tnoat\n\t"		    \
+		"1:sb\t%1, 0(%2)\n\t"		    \
+		"dsrl\t$1, %1, 0x8\n\t"		    \
+		"2:sb\t$1, 1(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"3:sb\t$1, 2(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"4:sb\t$1, 3(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"5:sb\t$1, 4(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"6:sb\t$1, 5(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"7:sb\t$1, 6(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		"8:sb\t$1, 7(%2)\n\t"		    \
+		"dsrl\t$1, $1, 0x8\n\t"		    \
+		".set\tpop\n\t"			    \
+		"li\t%0, 0\n"			    \
+		"10:\n\t"			    \
+		".insn\n\t"			    \
+		".section\t.fixup,\"ax\"\n\t"	    \
+		"11:\tli\t%0, %3\n\t"		    \
+		"j\t10b\n\t"			    \
+		".previous\n\t"			    \
+		".section\t__ex_table,\"a\"\n\t"    \
+		STR(PTR)"\t1b, 11b\n\t"		    \
+		STR(PTR)"\t2b, 11b\n\t"		    \
+		STR(PTR)"\t3b, 11b\n\t"		    \
+		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR)"\t5b, 11b\n\t"		    \
+		STR(PTR)"\t6b, 11b\n\t"		    \
+		STR(PTR)"\t7b, 11b\n\t"		    \
+		STR(PTR)"\t8b, 11b\n\t"		    \
+		".previous"			    \
+		: "=&r" (res)				    \
+		: "r" (value), "r" (addr), "i" (-EFAULT)    \
+		: "memory");                                \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+#endif
+
+#define LoadHWU(addr, value, res)	_LoadHWU(addr, value, res, kernel)
+#define LoadHWUE(addr, value, res)	_LoadHWU(addr, value, res, user)
+#define LoadWU(addr, value, res)	_LoadWU(addr, value, res, kernel)
+#define LoadWUE(addr, value, res)	_LoadWU(addr, value, res, user)
+#define LoadHW(addr, value, res)	_LoadHW(addr, value, res, kernel)
+#define LoadHWE(addr, value, res)	_LoadHW(addr, value, res, user)
+#define LoadW(addr, value, res)		_LoadW(addr, value, res, kernel)
+#define LoadWE(addr, value, res)	_LoadW(addr, value, res, user)
+#define LoadDW(addr, value, res)	_LoadDW(addr, value, res)
+
+#define StoreHW(addr, value, res)	_StoreHW(addr, value, res, kernel)
+#define StoreHWE(addr, value, res)	_StoreHW(addr, value, res, user)
+#define StoreW(addr, value, res)	_StoreW(addr, value, res, kernel)
+#define StoreWE(addr, value, res)	_StoreW(addr, value, res, user)
+#define StoreDW(addr, value, res)	_StoreDW(addr, value, res)
+
 #endif /* _ASM_INST_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index cf1f2a4a2418..346fffd9e972 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -30,8 +30,6 @@
 #include <asm/pgtable-bits.h>
 #include <asm/processor.h>
 #include <asm/string.h>
-
-#include <ioremap.h>
 #include <mangle-port.h>
 
 /*
@@ -153,66 +151,9 @@ static inline void *isa_bus_to_virt(unsigned long address)
  */
 #define page_to_phys(page)	((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
 
-extern void __iomem * __ioremap(phys_addr_t offset, phys_addr_t size, unsigned long flags);
-extern void __iounmap(const volatile void __iomem *addr);
-
-static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long size,
-	unsigned long flags)
-{
-	void __iomem *addr = plat_ioremap(offset, size, flags);
-
-	if (addr)
-		return addr;
-
-#define __IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL))
-
-	if (cpu_has_64bit_addresses) {
-		u64 base = UNCAC_BASE;
-
-		/*
-		 * R10000 supports a 2 bit uncached attribute therefore
-		 * UNCAC_BASE may not equal IO_BASE.
-		 */
-		if (flags == _CACHE_UNCACHED)
-			base = (u64) IO_BASE;
-		return (void __iomem *) (unsigned long) (base + offset);
-	} else if (__builtin_constant_p(offset) &&
-		   __builtin_constant_p(size) && __builtin_constant_p(flags)) {
-		phys_addr_t phys_addr, last_addr;
-
-		phys_addr = fixup_bigphys_addr(offset, size);
-
-		/* Don't allow wraparound or zero size. */
-		last_addr = phys_addr + size - 1;
-		if (!size || last_addr < phys_addr)
-			return NULL;
-
-		/*
-		 * Map uncached objects in the low 512MB of address
-		 * space using KSEG1.
-		 */
-		if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
-		    flags == _CACHE_UNCACHED)
-			return (void __iomem *)
-				(unsigned long)CKSEG1ADDR(phys_addr);
-	}
-
-	return __ioremap(offset, size, flags);
-
-#undef __IS_LOW512
-}
-
-/*
- * ioremap_prot     -   map bus memory into CPU space
- * @offset:    bus address of the memory
- * @size:      size of the resource to map
-
- * ioremap_prot gives the caller control over cache coherency attributes (CCA)
- */
-static inline void __iomem *ioremap_prot(phys_addr_t offset,
-		unsigned long size, unsigned long prot_val) {
-	return __ioremap_mode(offset, size, prot_val & _CACHE_MASK);
-}
+void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
+		unsigned long prot_val);
+void iounmap(const volatile void __iomem *addr);
 
 /*
  * ioremap     -   map bus memory into CPU space
@@ -226,7 +167,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset,
  * address.
  */
 #define ioremap(offset, size)						\
-	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+	ioremap_prot((offset), (size), _CACHE_UNCACHED)
 #define ioremap_uc		ioremap
 
 /*
@@ -245,7 +186,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset,
  * memory-like regions on I/O busses.
  */
 #define ioremap_cache(offset, size)					\
-	__ioremap_mode((offset), (size), _page_cachable_default)
+	ioremap_prot((offset), (size), _page_cachable_default)
 
 /*
  * ioremap_wc     -   map bus memory into CPU space
@@ -266,23 +207,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset,
  * _CACHE_UNCACHED option (see cpu_probe() method).
  */
 #define ioremap_wc(offset, size)					\
-	__ioremap_mode((offset), (size), boot_cpu_data.writecombine)
-
-static inline void iounmap(const volatile void __iomem *addr)
-{
-	if (plat_iounmap(addr))
-		return;
-
-#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
-
-	if (cpu_has_64bit_addresses ||
-	    (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
-		return;
-
-	__iounmap(addr);
-
-#undef __IS_KSEG1
-}
+	ioremap_prot((offset), (size), boot_cpu_data.writecombine)
 
 #if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64)
 #define war_io_reorder_wmb()		wmb()
diff --git a/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
index 95a0b580909d..a54f20d956a2 100644
--- a/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
@@ -56,6 +56,5 @@
 #define cpu_has_64bits			0
 #define cpu_has_64bit_zero_reg		0
 #define cpu_has_64bit_gp_regs		0
-#define cpu_has_64bit_addresses		0
 
 #endif /* __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
index e7c972fccd9f..79ab3ad9fee8 100644
--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
@@ -45,7 +45,6 @@
 #define cpu_has_64bits		0
 #define cpu_has_64bit_zero_reg	0
 #define cpu_has_64bit_gp_regs	0
-#define cpu_has_64bit_addresses 0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h
deleted file mode 100644
index f6877ed8b8d0..000000000000
--- a/arch/mips/include/asm/mach-au1x00/ioremap.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *	include/asm-mips/mach-au1x00/ioremap.h
- */
-#ifndef __ASM_MACH_AU1X00_IOREMAP_H
-#define __ASM_MACH_AU1X00_IOREMAP_H
-
-#include <linux/types.h>
-
-#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
-extern phys_addr_t __fixup_bigphys_addr(phys_addr_t, phys_addr_t);
-#else
-static inline phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
-	return phys_addr;
-}
-#endif
-
-/*
- * Allow physical addresses to be fixed up to help 36-bit peripherals.
- */
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
-	return __fixup_bigphys_addr(phys_addr, size);
-}
-
-static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
-	unsigned long flags)
-{
-	return NULL;
-}
-
-static inline int plat_iounmap(const volatile void __iomem *addr)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/ioremap.h b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
index 8cd261ec0a75..73f31825bbf3 100644
--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
@@ -4,11 +4,6 @@
 
 #include <bcm63xx_cpu.h>
 
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
-	return phys_addr;
-}
-
 static inline int is_bcm63xx_internal_registers(phys_addr_t offset)
 {
 	switch (bcm63xx_get_cpu_id()) {
diff --git a/arch/mips/include/asm/mach-bmips/ioremap.h b/arch/mips/include/asm/mach-bmips/ioremap.h
index 52632ebc705f..63b4af9916b6 100644
--- a/arch/mips/include/asm/mach-bmips/ioremap.h
+++ b/arch/mips/include/asm/mach-bmips/ioremap.h
@@ -4,11 +4,6 @@
 
 #include <linux/types.h>
 
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
-	return phys_addr;
-}
-
 static inline int is_bmips_internal_registers(phys_addr_t offset)
 {
 	if (offset >= 0xfff80000)
diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h
index 4e36ea25ed33..f2442b84545c 100644
--- a/arch/mips/include/asm/mach-generic/ioremap.h
+++ b/arch/mips/include/asm/mach-generic/ioremap.h
@@ -7,15 +7,6 @@
 
 #include <linux/types.h>
 
-/*
- * Allow physical addresses to be fixed up to help peripherals located
- * outside the low 32-bit range -- generic pass-through version.
- */
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
-	return phys_addr;
-}
-
 static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
 	unsigned long flags)
 {
diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h
index be546a0f65fa..72ac2c202c55 100644
--- a/arch/mips/include/asm/mach-generic/irq.h
+++ b/arch/mips/include/asm/mach-generic/irq.h
@@ -36,10 +36,4 @@
 
 #endif /* CONFIG_IRQ_MIPS_CPU */
 
-#ifdef CONFIG_MIPS_GIC
-#ifndef MIPS_GIC_IRQ_BASE
-#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
-#endif
-#endif /* CONFIG_MIPS_GIC */
-
 #endif /* __ASM_MACH_GENERIC_IRQ_H */
diff --git a/arch/mips/include/asm/mach-jz4740/base.h b/arch/mips/include/asm/mach-jz4740/base.h
deleted file mode 100644
index 96b2d6674cdb..000000000000
--- a/arch/mips/include/asm/mach-jz4740/base.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_JZ4740_BASE_H__
-#define __ASM_MACH_JZ4740_BASE_H__
-
-#define JZ4740_CPM_BASE_ADDR	0x10000000
-#define JZ4740_INTC_BASE_ADDR	0x10001000
-#define JZ4740_WDT_BASE_ADDR	0x10002000
-#define JZ4740_TCU_BASE_ADDR	0x10002010
-#define JZ4740_RTC_BASE_ADDR	0x10003000
-#define JZ4740_GPIO_BASE_ADDR	0x10010000
-#define JZ4740_AIC_BASE_ADDR	0x10020000
-#define JZ4740_MSC_BASE_ADDR	0x10021000
-#define JZ4740_UART0_BASE_ADDR	0x10030000
-#define JZ4740_UART1_BASE_ADDR	0x10031000
-#define JZ4740_I2C_BASE_ADDR	0x10042000
-#define JZ4740_SSI_BASE_ADDR	0x10043000
-#define JZ4740_SADC_BASE_ADDR	0x10070000
-#define JZ4740_EMC_BASE_ADDR	0x13010000
-#define JZ4740_DMAC_BASE_ADDR	0x13020000
-#define JZ4740_UHC_BASE_ADDR	0x13030000
-#define JZ4740_UDC_BASE_ADDR	0x13040000
-#define JZ4740_LCD_BASE_ADDR	0x13050000
-#define JZ4740_SLCD_BASE_ADDR	0x13050000
-#define JZ4740_CIM_BASE_ADDR	0x13060000
-#define JZ4740_IPU_BASE_ADDR	0x13080000
-
-#endif
diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h
deleted file mode 100644
index e5d2a5311a3a..000000000000
--- a/arch/mips/include/asm/mach-jz4740/dma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ7420/JZ4740 DMA definitions
- */
-
-#ifndef __ASM_MACH_JZ4740_DMA_H__
-#define __ASM_MACH_JZ4740_DMA_H__
-
-enum jz4740_dma_request_type {
-	JZ4740_DMA_TYPE_AUTO_REQUEST	= 8,
-	JZ4740_DMA_TYPE_UART_TRANSMIT	= 20,
-	JZ4740_DMA_TYPE_UART_RECEIVE	= 21,
-	JZ4740_DMA_TYPE_SPI_TRANSMIT	= 22,
-	JZ4740_DMA_TYPE_SPI_RECEIVE	= 23,
-	JZ4740_DMA_TYPE_MMC_TRANSMIT	= 26,
-	JZ4740_DMA_TYPE_MMC_RECEIVE	= 27,
-	JZ4740_DMA_TYPE_TCU		= 28,
-	JZ4740_DMA_TYPE_SADC		= 29,
-	JZ4740_DMA_TYPE_SLCD		= 30,
-};
-
-#endif	/* __ASM_JZ4740_DMA_H__ */
diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h
index 09c38eac671a..27c543bd340f 100644
--- a/arch/mips/include/asm/mach-jz4740/irq.h
+++ b/arch/mips/include/asm/mach-jz4740/irq.h
@@ -8,49 +8,6 @@
 #define __ASM_MACH_JZ4740_IRQ_H__
 
 #define MIPS_CPU_IRQ_BASE 0
-#define JZ4740_IRQ_BASE 8
-
-#ifdef CONFIG_MACH_JZ4740
-# define NR_INTC_IRQS	32
-#else
-# define NR_INTC_IRQS	64
-#endif
-
-/* 1st-level interrupts */
-#define JZ4740_IRQ(x)		(JZ4740_IRQ_BASE + (x))
-#define JZ4740_IRQ_I2C		JZ4740_IRQ(1)
-#define JZ4740_IRQ_UHC		JZ4740_IRQ(3)
-#define JZ4740_IRQ_UART1	JZ4740_IRQ(8)
-#define JZ4740_IRQ_UART0	JZ4740_IRQ(9)
-#define JZ4740_IRQ_SADC		JZ4740_IRQ(12)
-#define JZ4740_IRQ_MSC		JZ4740_IRQ(14)
-#define JZ4740_IRQ_RTC		JZ4740_IRQ(15)
-#define JZ4740_IRQ_SSI		JZ4740_IRQ(16)
-#define JZ4740_IRQ_CIM		JZ4740_IRQ(17)
-#define JZ4740_IRQ_AIC		JZ4740_IRQ(18)
-#define JZ4740_IRQ_ETH		JZ4740_IRQ(19)
-#define JZ4740_IRQ_DMAC		JZ4740_IRQ(20)
-#define JZ4740_IRQ_TCU2		JZ4740_IRQ(21)
-#define JZ4740_IRQ_TCU1		JZ4740_IRQ(22)
-#define JZ4740_IRQ_TCU0		JZ4740_IRQ(23)
-#define JZ4740_IRQ_UDC		JZ4740_IRQ(24)
-#define JZ4740_IRQ_GPIO3	JZ4740_IRQ(25)
-#define JZ4740_IRQ_GPIO2	JZ4740_IRQ(26)
-#define JZ4740_IRQ_GPIO1	JZ4740_IRQ(27)
-#define JZ4740_IRQ_GPIO0	JZ4740_IRQ(28)
-#define JZ4740_IRQ_IPU		JZ4740_IRQ(29)
-#define JZ4740_IRQ_LCD		JZ4740_IRQ(30)
-
-#define JZ4780_IRQ_TCU2		JZ4740_IRQ(25)
-
-/* 2nd-level interrupts */
-#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(NR_INTC_IRQS) + (x))
-
-#define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x))
-#define JZ4740_IRQ_GPIO(x)	(JZ4740_IRQ(NR_INTC_IRQS + 16) + (x))
-
-#define JZ4740_IRQ_ADC_BASE	JZ4740_IRQ(NR_INTC_IRQS + 144)
-
-#define NR_IRQS (JZ4740_IRQ_ADC_BASE + 6)
+#define NR_IRQS 256
 
 #endif
diff --git a/arch/mips/include/asm/mach-jz4740/timer.h b/arch/mips/include/asm/mach-jz4740/timer.h
deleted file mode 100644
index 8a19cfe5bed7..000000000000
--- a/arch/mips/include/asm/mach-jz4740/timer.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 platform timer support
- */
-
-#ifndef __ASM_MACH_JZ4740_TIMER
-#define __ASM_MACH_JZ4740_TIMER
-
-#define JZ_REG_TIMER_STOP		0x0C
-#define JZ_REG_TIMER_STOP_SET		0x1C
-#define JZ_REG_TIMER_STOP_CLEAR		0x2C
-#define JZ_REG_TIMER_ENABLE		0x00
-#define JZ_REG_TIMER_ENABLE_SET		0x04
-#define JZ_REG_TIMER_ENABLE_CLEAR	0x08
-#define JZ_REG_TIMER_FLAG		0x10
-#define JZ_REG_TIMER_FLAG_SET		0x14
-#define JZ_REG_TIMER_FLAG_CLEAR		0x18
-#define JZ_REG_TIMER_MASK		0x20
-#define JZ_REG_TIMER_MASK_SET		0x24
-#define JZ_REG_TIMER_MASK_CLEAR		0x28
-
-#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x30)
-#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x34)
-#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x38)
-#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x3C)
-
-#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10)
-#define JZ_TIMER_IRQ_FULL(x) BIT(x)
-
-#define JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN	BIT(9)
-#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW		BIT(8)
-#define JZ_TIMER_CTRL_PWM_ENABLE		BIT(7)
-#define JZ_TIMER_CTRL_PRESCALE_MASK		0x1c
-#define JZ_TIMER_CTRL_PRESCALE_OFFSET		0x3
-#define JZ_TIMER_CTRL_PRESCALE_1		(0 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_4		(1 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_16		(2 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_64		(3 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_256		(4 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_1024		(5 << 3)
-
-#define JZ_TIMER_CTRL_PRESCALER(x) ((x) << JZ_TIMER_CTRL_PRESCALE_OFFSET)
-
-#define JZ_TIMER_CTRL_SRC_EXT		BIT(2)
-#define JZ_TIMER_CTRL_SRC_RTC		BIT(1)
-#define JZ_TIMER_CTRL_SRC_PCLK		BIT(0)
-
-extern void __iomem *jz4740_timer_base;
-void __init jz4740_timer_init(void);
-
-void jz4740_timer_enable_watchdog(void);
-void jz4740_timer_disable_watchdog(void);
-
-static inline void jz4740_timer_stop(unsigned int timer)
-{
-	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
-}
-
-static inline void jz4740_timer_start(unsigned int timer)
-{
-	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
-}
-
-static inline bool jz4740_timer_is_enabled(unsigned int timer)
-{
-	return readb(jz4740_timer_base + JZ_REG_TIMER_ENABLE) & BIT(timer);
-}
-
-static inline void jz4740_timer_enable(unsigned int timer)
-{
-	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET);
-}
-
-static inline void jz4740_timer_disable(unsigned int timer)
-{
-	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR);
-}
-
-static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period)
-{
-	writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer));
-}
-
-static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty)
-{
-	writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer));
-}
-
-static inline void jz4740_timer_set_count(unsigned int timer, uint16_t count)
-{
-	writew(count, jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
-}
-
-static inline uint16_t jz4740_timer_get_count(unsigned int timer)
-{
-	return readw(jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
-}
-
-static inline void jz4740_timer_ack_full(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
-}
-
-static inline void jz4740_timer_irq_full_enable(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR);
-}
-
-static inline void jz4740_timer_irq_full_disable(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
-}
-
-static inline void jz4740_timer_set_ctrl(unsigned int timer, uint16_t ctrl)
-{
-	writew(ctrl, jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
-}
-
-static inline uint16_t jz4740_timer_get_ctrl(unsigned int timer)
-{
-	return readw(jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
-}
-
-#endif
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
index f03c1c42dd90..10226976f7b7 100644
--- a/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
@@ -46,7 +46,6 @@
 #define cpu_has_64bits		0
 #define cpu_has_64bit_zero_reg	0
 #define cpu_has_64bit_gp_regs	0
-#define cpu_has_64bit_addresses	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff --git a/arch/mips/include/asm/mach-loongson2ef/loongson.h b/arch/mips/include/asm/mach-loongson2ef/loongson.h
index 5008af0a1a19..57e571128489 100644
--- a/arch/mips/include/asm/mach-loongson2ef/loongson.h
+++ b/arch/mips/include/asm/mach-loongson2ef/loongson.h
@@ -244,6 +244,7 @@ static inline void do_perfcnt_IRQ(void)
 #ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
 #include <linux/cpufreq.h>
 extern struct cpufreq_frequency_table loongson2_clockmod_table[];
+extern int loongson2_cpu_set_rate(unsigned long rate_khz);
 #endif
 
 /*
diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
index 2ed483e32d8c..f082d87665bc 100644
--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -192,6 +192,11 @@ struct boot_params {
 	struct efi_reset_system_t reset_system;
 };
 
+enum loongson_bridge_type {
+	LS7A = 1,
+	RS780E = 2
+};
+
 struct loongson_system_configuration {
 	u32 nr_cpus;
 	u32 nr_nodes;
@@ -200,6 +205,7 @@ struct loongson_system_configuration {
 	u16 boot_cpu_id;
 	u16 reserved_cpus_mask;
 	enum loongson_cpu_type cputype;
+	enum loongson_bridge_type bridgetype;
 	u64 ht_control_base;
 	u64 pci_mem_start_addr;
 	u64 pci_mem_end_addr;
diff --git a/arch/mips/include/asm/mach-loongson64/mc146818rtc.h b/arch/mips/include/asm/mach-loongson64/mc146818rtc.h
deleted file mode 100644
index ebdccfee50be..000000000000
--- a/arch/mips/include/asm/mach-loongson64/mc146818rtc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
- *
- * RTC routines for PC style attached Dallas chip.
- */
-#ifndef __ASM_MACH_LOONGSON64_MC146818RTC_H
-#define __ASM_MACH_LOONGSON64_MC146818RTC_H
-
-#include <linux/io.h>
-
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_IRQ		8
-
-static inline unsigned char CMOS_READ(unsigned long addr)
-{
-	outb_p(addr, RTC_PORT(0));
-	return inb_p(RTC_PORT(1));
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
-{
-	outb_p(addr, RTC_PORT(0));
-	outb_p(data, RTC_PORT(1));
-}
-
-#define RTC_ALWAYS_BCD	0
-
-#ifndef mc146818_decode_year
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
-#endif
-
-#endif /* __ASM_MACH_LOONGSON64_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h
index 6ea5908f0c11..c4579f1705c2 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h
@@ -45,7 +45,6 @@
 #define cpu_has_64bits		0
 #define cpu_has_64bit_zero_reg	0
 #define cpu_has_64bit_gp_regs	0
-#define cpu_has_64bit_addresses	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h
index 65483a4681ab..e1af1ba50bd8 100644
--- a/arch/mips/include/asm/mach-ralink/mt7621.h
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -31,6 +31,4 @@
 #define MT7621_CHIP_NAME0		0x3637544D
 #define MT7621_CHIP_NAME1		0x20203132
 
-#define MIPS_GIC_IRQ_BASE           (MIPS_CPU_IRQ_BASE + 8)
-
 #endif
diff --git a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
index e06f517b2588..168359a0a58d 100644
--- a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
@@ -46,7 +46,6 @@
 #define cpu_has_64bits		0
 #define cpu_has_64bit_zero_reg	0
 #define cpu_has_64bit_gp_regs	0
-#define cpu_has_64bit_addresses	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff --git a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
index 9c069646d0bd..fdaf8c9182bc 100644
--- a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
@@ -44,7 +44,6 @@
 #define cpu_has_64bits		0
 #define cpu_has_64bit_zero_reg	0
 #define cpu_has_64bit_gp_regs	0
-#define cpu_has_64bit_addresses	0
 
 #define cpu_dcache_line_size()	16
 #define cpu_icache_line_size()	16
diff --git a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
index 2e423fd15384..7a385fe784a6 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
@@ -44,7 +44,6 @@
 #define cpu_has_64bits		0
 #define cpu_has_64bit_zero_reg	0
 #define cpu_has_64bit_gp_regs	0
-#define cpu_has_64bit_addresses	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff --git a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
index 7cee0e232580..0a61910f6521 100644
--- a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
@@ -43,7 +43,6 @@
 #define cpu_has_64bits		0
 #define cpu_has_64bit_zero_reg	0
 #define cpu_has_64bit_gp_regs	0
-#define cpu_has_64bit_addresses	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
index bc46179fdf40..8539ccfb69b7 100644
--- a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
@@ -54,7 +54,6 @@
 #define cpu_has_64bits			0
 #define cpu_has_64bit_zero_reg		0
 #define cpu_has_64bit_gp_regs		0
-#define cpu_has_64bit_addresses		0
 
 #define cpu_has_inclusive_pcaches	0
 
diff --git a/arch/mips/include/asm/mach-tx39xx/ioremap.h b/arch/mips/include/asm/mach-tx39xx/ioremap.h
index 077b3c9971f7..157a7292397e 100644
--- a/arch/mips/include/asm/mach-tx39xx/ioremap.h
+++ b/arch/mips/include/asm/mach-tx39xx/ioremap.h
@@ -7,15 +7,6 @@
 
 #include <linux/types.h>
 
-/*
- * Allow physical addresses to be fixed up to help peripherals located
- * outside the low 32-bit range -- generic pass-through version.
- */
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
-	return phys_addr;
-}
-
 static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
 	unsigned long flags)
 {
diff --git a/arch/mips/include/asm/mach-tx49xx/ioremap.h b/arch/mips/include/asm/mach-tx49xx/ioremap.h
index c6b9e05f44c4..b1f3710acf8e 100644
--- a/arch/mips/include/asm/mach-tx49xx/ioremap.h
+++ b/arch/mips/include/asm/mach-tx49xx/ioremap.h
@@ -7,15 +7,6 @@
 
 #include <linux/types.h>
 
-/*
- * Allow physical addresses to be fixed up to help peripherals located
- * outside the low 32-bit range -- generic pass-through version.
- */
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
-	return phys_addr;
-}
-
 static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
 	unsigned long flags)
 {
diff --git a/arch/mips/include/asm/mach-xilfpga/irq.h b/arch/mips/include/asm/mach-xilfpga/irq.h
deleted file mode 100644
index 15ad29ec1dee..000000000000
--- a/arch/mips/include/asm/mach-xilfpga/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2015 Imagination Technologies
- * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
- */
-
-#ifndef __MIPS_ASM_MACH_XILFPGA_IRQ_H__
-#define __MIPS_ASM_MACH_XILFPGA_IRQ_H__
-
-#define NR_IRQS 32
-
-#include <asm/mach-generic/irq.h>
-
-#endif /* __MIPS_ASM_MACH_XILFPGA_IRQ_H__ */
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index f92716cfa4f4..ee5dc0c145b9 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -172,6 +172,8 @@
 
 extern pte_t invalid_pte_table[PTRS_PER_PTE];
 
+#define pud_index(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
+
 #ifndef __PAGETABLE_PUD_FOLDED
 /*
  * For 4-level pagetables we defines these ourselves, for 3-level the
@@ -210,8 +212,6 @@ static inline void p4d_clear(p4d_t *p4dp)
 	p4d_val(*p4dp) = (unsigned long)invalid_pud_table;
 }
 
-#define pud_index(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
-
 static inline unsigned long p4d_page_vaddr(p4d_t p4d)
 {
 	return p4d_val(p4d);
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index f1801e7a4b15..4d9913f1644c 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -507,20 +507,17 @@ static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
 
 #define kern_addr_valid(addr)	(1)
 
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
-extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
-
-static inline int io_remap_pfn_range(struct vm_area_struct *vma,
-		unsigned long vaddr,
-		unsigned long pfn,
-		unsigned long size,
-		pgprot_t prot)
-{
-	phys_addr_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
-	return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
-}
+/*
+ * Allow physical addresses to be fixed up to help 36-bit peripherals.
+ */
+#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR
+phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size);
+int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr,
+		unsigned long pfn, unsigned long size, pgprot_t prot);
 #define io_remap_pfn_range io_remap_pfn_range
-#endif
+#else
+#define fixup_bigphys_addr(addr, size)	(addr)
+#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 
@@ -631,7 +628,7 @@ static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 	return pmd;
 }
 
-static inline pmd_t pmd_mknotpresent(pmd_t pmd)
+static inline pmd_t pmd_mkinvalid(pmd_t pmd)
 {
 	pmd_val(pmd) &= ~(_PAGE_PRESENT | _PAGE_VALID | _PAGE_DIRTY);
 
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 7990c1c70471..5d9ff61004ca 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -125,7 +125,7 @@ static inline void arch_send_call_function_single_ipi(int cpu)
 {
 	extern const struct plat_smp_ops *mp_ops;	/* private */
 
-	mp_ops->send_ipi_mask(cpumask_of(cpu), SMP_CALL_FUNCTION);
+	mp_ops->send_ipi_single(cpu, SMP_CALL_FUNCTION);
 }
 
 static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index eaa3a80affdf..98f97c85e059 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -988,6 +988,30 @@ struct mm16_r5_format {		/* Load/store from stack pointer format */
 	;))))
 };
 
+/*
+ * Loongson-3 overridden COP2 instruction formats (32-bit length)
+ */
+struct loongson3_lswc2_format {	/* Loongson-3 overridden lwc2/swc2 Load/Store format */
+	__BITFIELD_FIELD(unsigned int opcode : 6,
+	__BITFIELD_FIELD(unsigned int base : 5,
+	__BITFIELD_FIELD(unsigned int rt : 5,
+	__BITFIELD_FIELD(unsigned int fr : 1,
+	__BITFIELD_FIELD(unsigned int offset : 9,
+	__BITFIELD_FIELD(unsigned int ls : 1,
+	__BITFIELD_FIELD(unsigned int rq : 5,
+	;)))))))
+};
+
+struct loongson3_lsdc2_format {	/* Loongson-3 overridden ldc2/sdc2 Load/Store format */
+	__BITFIELD_FIELD(unsigned int opcode : 6,
+	__BITFIELD_FIELD(unsigned int base : 5,
+	__BITFIELD_FIELD(unsigned int rt : 5,
+	__BITFIELD_FIELD(unsigned int index : 5,
+	__BITFIELD_FIELD(unsigned int offset : 8,
+	__BITFIELD_FIELD(unsigned int opcode1 : 3,
+	;))))))
+};
+
 /*
  * MIPS16e instruction formats (16-bit length)
  */
@@ -1088,6 +1112,8 @@ union mips_instruction {
 	struct mm16_rb_format mm16_rb_format;
 	struct mm16_r3_format mm16_r3_format;
 	struct mm16_r5_format mm16_r5_format;
+	struct loongson3_lswc2_format loongson3_lswc2_format;
+	struct loongson3_lsdc2_format loongson3_lsdc2_format;
 };
 
 union mips16e_instruction {
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 6de14c0deb4e..f96c0f5eca44 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -4,11 +4,6 @@
 #
 
 # Object file lists.
-
-obj-y += prom.o time.o reset.o setup.o timer.o
+obj-y += setup.o
 
 CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
-
-# PM support
-
-obj-$(CONFIG_PM) += pm.o
diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
deleted file mode 100644
index f9b551f01f42..000000000000
--- a/arch/mips/jz4740/pm.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *	JZ4740 SoC power management support
- */
-
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
-
-static int jz4740_pm_enter(suspend_state_t state)
-{
-	__asm__(".set\tmips3\n\t"
-		"wait\n\t"
-		".set\tmips0");
-
-
-
-	return 0;
-}
-
-static const struct platform_suspend_ops jz4740_pm_ops = {
-	.valid		= suspend_valid_only_mem,
-	.enter		= jz4740_pm_enter,
-};
-
-static int __init jz4740_pm_init(void)
-{
-	suspend_set_ops(&jz4740_pm_ops);
-	return 0;
-
-}
-late_initcall(jz4740_pm_init);
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
deleted file mode 100644
index ff4555c3fb15..000000000000
--- a/arch/mips/jz4740/prom.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 SoC prom code
- */
-
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/fw/fw.h>
-
-void __init prom_init(void)
-{
-	fw_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c
deleted file mode 100644
index 1f9f02e54085..000000000000
--- a/arch/mips/jz4740/reset.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#include <asm/reboot.h>
-
-#include "reset.h"
-
-static void jz4740_halt(void)
-{
-	while (1) {
-		__asm__(".set push;\n"
-			".set mips3;\n"
-			"wait;\n"
-			".set pop;\n"
-		);
-	}
-}
-
-void jz4740_reset_init(void)
-{
-	_machine_halt = jz4740_halt;
-}
diff --git a/arch/mips/jz4740/reset.h b/arch/mips/jz4740/reset.h
deleted file mode 100644
index 4e8746ee9b61..000000000000
--- a/arch/mips/jz4740/reset.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MIPS_JZ4740_RESET_H__
-#define __MIPS_JZ4740_RESET_H__
-
-extern void jz4740_reset_init(void);
-
-#endif
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 880c26857aff..81428ddcaa97 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -5,17 +5,21 @@
  *  JZ4740 setup code
  */
 
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/libfdt.h>
 #include <linux/of_fdt.h>
+#include <linux/pm.h>
+#include <linux/suspend.h>
 
 #include <asm/bootinfo.h>
+#include <asm/fw/fw.h>
 #include <asm/prom.h>
-
-#include "reset.h"
+#include <asm/reboot.h>
 
 #define JZ4740_EMC_BASE_ADDR 0x13010000
 
@@ -61,8 +65,6 @@ void __init plat_mem_setup(void)
 	int offset;
 	void *dtb;
 
-	jz4740_reset_init();
-
 	if (__dtb_start != __dtb_end)
 		dtb = __dtb_start;
 	else
@@ -105,3 +107,56 @@ void __init arch_init_irq(void)
 {
 	irqchip_init();
 }
+
+void __init plat_time_init(void)
+{
+	of_clk_init(NULL);
+	timer_probe();
+}
+
+void __init prom_init(void)
+{
+	fw_init_cmdline();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+static void jz4740_wait_instr(void)
+{
+	__asm__(".set push;\n"
+		".set mips3;\n"
+		"wait;\n"
+		".set pop;\n"
+	);
+}
+
+static void jz4740_halt(void)
+{
+	for (;;)
+		jz4740_wait_instr();
+}
+
+static int __maybe_unused jz4740_pm_enter(suspend_state_t state)
+{
+	jz4740_wait_instr();
+
+	return 0;
+}
+
+static const struct platform_suspend_ops jz4740_pm_ops __maybe_unused = {
+	.valid = suspend_valid_only_mem,
+	.enter = jz4740_pm_enter,
+};
+
+static int __init jz4740_pm_init(void)
+{
+	if (IS_ENABLED(CONFIG_PM_SLEEP))
+		suspend_set_ops(&jz4740_pm_ops);
+	_machine_halt = jz4740_halt;
+
+	return 0;
+
+}
+late_initcall(jz4740_pm_init);
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
deleted file mode 100644
index 605a84a250bf..000000000000
--- a/arch/mips/jz4740/time.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 platform time support
- */
-
-#include <linux/clocksource.h>
-#include <linux/of_clk.h>
-
-#include <asm/mach-jz4740/timer.h>
-
-void __init plat_time_init(void)
-{
-	of_clk_init(NULL);
-	jz4740_timer_init();
-	timer_probe();
-}
diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c
deleted file mode 100644
index 5c9f82de6a82..000000000000
--- a/arch/mips/jz4740/timer.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 platform timer support
- */
-
-#include <linux/export.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/mach-jz4740/base.h>
-#include <asm/mach-jz4740/timer.h>
-
-void __iomem *jz4740_timer_base;
-EXPORT_SYMBOL_GPL(jz4740_timer_base);
-
-void jz4740_timer_enable_watchdog(void)
-{
-	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
-}
-EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog);
-
-void jz4740_timer_disable_watchdog(void)
-{
-	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
-}
-EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog);
-
-void __init jz4740_timer_init(void)
-{
-	jz4740_timer_base = ioremap(JZ4740_TCU_BASE_ADDR, 0x100);
-
-	if (!jz4740_timer_base)
-		panic("Failed to ioremap timer registers");
-
-	/* Disable all timer clocks except for those used as system timers */
-	writel(0x000100fc, jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
-
-	/* Timer irqs are unmasked by default, mask them */
-	writel(0x00ff00ff, jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
-}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index f21a2304401f..6de14b527c68 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1935,7 +1935,24 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	switch (c->processor_id & PRID_IMP_MASK) {
-	case PRID_IMP_LOONGSON_64C:  /* Loongson-2/3 */
+	case PRID_IMP_LOONGSON_64R: /* Loongson-64 Reduced */
+		switch (c->processor_id & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON2K_R1_0:
+		case PRID_REV_LOONGSON2K_R1_1:
+		case PRID_REV_LOONGSON2K_R1_2:
+		case PRID_REV_LOONGSON2K_R1_3:
+			c->cputype = CPU_LOONGSON64;
+			__cpu_name[cpu] = "Loongson-2K";
+			set_elf_platform(cpu, "gs264e");
+			set_isa(c, MIPS_CPU_ISA_M64R2);
+			break;
+		}
+		decode_configs(c);
+		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+		c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT |
+				MIPS_ASE_LOONGSON_EXT2);
+		break;
+	case PRID_IMP_LOONGSON_64C:  /* Loongson-3 Classic */
 		switch (c->processor_id & PRID_REV_MASK) {
 		case PRID_REV_LOONGSON3A_R2_0:
 		case PRID_REV_LOONGSON3A_R2_1:
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 351d40fe0859..3b02ffe46304 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -132,6 +132,9 @@ dtb_found:
 #endif
 
 	MTC0		zero, CP0_CONTEXT	# clear context register
+#ifdef CONFIG_64BIT
+	MTC0		zero, CP0_XCONTEXT
+#endif
 	PTR_LA		$28, init_thread_union
 	/* Set the SP after an empty pt_regs.  */
 	PTR_LI		sp, _THREAD_SIZE - 32 - PT_SIZE
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 37f8e78e2869..60d8c2a380fe 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -180,7 +180,8 @@ void __init check_wait(void)
 		break;
 	case CPU_LOONGSON64:
 		if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >=
-				(PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0))
+				(PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) ||
+				(c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
 			cpu_wait = r4k_wait;
 		break;
 
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 10bef8f78e7c..8db533cd816c 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -654,8 +654,6 @@ static void __init bootcmdline_init(char **cmdline_p)
  */
 static void __init arch_mem_init(char **cmdline_p)
 {
-	extern void plat_mem_setup(void);
-
 	/* call board setup routine */
 	plat_mem_setup();
 	memblock_set_bottom_up(true);
@@ -702,7 +700,17 @@ static void __init arch_mem_init(char **cmdline_p)
 		memblock_reserve(crashk_res.start, resource_size(&crashk_res));
 #endif
 	device_tree_init();
+
+	/*
+	 * In order to reduce the possibility of kernel panic when failed to
+	 * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
+	 * low memory as small as possible before plat_swiotlb_setup(), so
+	 * make sparse_init() using top-down allocation.
+	 */
+	memblock_set_bottom_up(false);
 	sparse_init();
+	memblock_set_bottom_up(true);
+
 	plat_swiotlb_setup();
 
 	dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
@@ -831,7 +839,7 @@ arch_initcall(debugfs_mips);
 /* User defined DMA coherency from command line. */
 enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
 EXPORT_SYMBOL_GPL(coherentio);
-int hw_coherentio = 0;	/* Actual hardware supported DMA coherency setting. */
+int hw_coherentio;	/* Actual hardware supported DMA coherency setting. */
 
 static int __init setcoherentio(char *str)
 {
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index f6efabcb4e92..4ee626049d92 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -52,7 +52,7 @@ struct sigframe {
 	/* Matches struct ucontext from its uc_mcontext field onwards */
 	struct sigcontext sf_sc;
 	sigset_t sf_mask;
-	unsigned long long sf_extcontext[0];
+	unsigned long long sf_extcontext[];
 };
 
 struct rt_sigframe {
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index 1f9e8ad636cc..1a20c9fcdcdb 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -376,3 +376,4 @@
 435	n32	clone3				__sys_clone3
 437	n32	openat2				sys_openat2
 438	n32	pidfd_getfd			sys_pidfd_getfd
+439	n32	process_madvise			compat_sys_process_madvise
diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl
index c0b9d802dbf6..0078f891bb92 100644
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -352,3 +352,4 @@
 435	n64	clone3				__sys_clone3
 437	n64	openat2				sys_openat2
 438	n64	pidfd_getfd			sys_pidfd_getfd
+439	n64	process_madvise			sys_process_madvise
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 31968cbd6464..4522902228b5 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -106,26 +106,26 @@ void (*board_bind_eic_interrupt)(int irq, int regset);
 void (*board_ebase_setup)(void);
 void(*board_cache_error_setup)(void);
 
-static void show_raw_backtrace(unsigned long reg29)
+static void show_raw_backtrace(unsigned long reg29, const char *loglvl)
 {
 	unsigned long *sp = (unsigned long *)(reg29 & ~3);
 	unsigned long addr;
 
-	printk("Call Trace:");
+	printk("%sCall Trace:", loglvl);
 #ifdef CONFIG_KALLSYMS
-	printk("\n");
+	printk("%s\n", loglvl);
 #endif
 	while (!kstack_end(sp)) {
 		unsigned long __user *p =
 			(unsigned long __user *)(unsigned long)sp++;
 		if (__get_user(addr, p)) {
-			printk(" (Bad stack address)");
+			printk("%s (Bad stack address)", loglvl);
 			break;
 		}
 		if (__kernel_text_address(addr))
-			print_ip_sym(addr);
+			print_ip_sym(loglvl, addr);
 	}
-	printk("\n");
+	printk("%s\n", loglvl);
 }
 
 #ifdef CONFIG_KALLSYMS
@@ -138,7 +138,8 @@ static int __init set_raw_show_trace(char *str)
 __setup("raw_show_trace", set_raw_show_trace);
 #endif
 
-static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
+static void show_backtrace(struct task_struct *task, const struct pt_regs *regs,
+			   const char *loglvl)
 {
 	unsigned long sp = regs->regs[29];
 	unsigned long ra = regs->regs[31];
@@ -148,12 +149,12 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
 		task = current;
 
 	if (raw_show_trace || user_mode(regs) || !__kernel_text_address(pc)) {
-		show_raw_backtrace(sp);
+		show_raw_backtrace(sp, loglvl);
 		return;
 	}
-	printk("Call Trace:\n");
+	printk("%sCall Trace:\n", loglvl);
 	do {
-		print_ip_sym(pc);
+		print_ip_sym(loglvl, pc);
 		pc = unwind_stack(task, &sp, pc, &ra);
 	} while (pc);
 	pr_cont("\n");
@@ -164,19 +165,19 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
  * with at least a bit of error checking ...
  */
 static void show_stacktrace(struct task_struct *task,
-	const struct pt_regs *regs)
+	const struct pt_regs *regs, const char *loglvl)
 {
 	const int field = 2 * sizeof(unsigned long);
 	long stackdata;
 	int i;
 	unsigned long __user *sp = (unsigned long __user *)regs->regs[29];
 
-	printk("Stack :");
+	printk("%sStack :", loglvl);
 	i = 0;
 	while ((unsigned long) sp & (PAGE_SIZE - 1)) {
 		if (i && ((i % (64 / field)) == 0)) {
 			pr_cont("\n");
-			printk("       ");
+			printk("%s       ", loglvl);
 		}
 		if (i > 39) {
 			pr_cont(" ...");
@@ -192,10 +193,10 @@ static void show_stacktrace(struct task_struct *task,
 		i++;
 	}
 	pr_cont("\n");
-	show_backtrace(task, regs);
+	show_backtrace(task, regs, loglvl);
 }
 
-void show_stack(struct task_struct *task, unsigned long *sp)
+void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
 {
 	struct pt_regs regs;
 	mm_segment_t old_fs = get_fs();
@@ -219,7 +220,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 	 * the stack in the kernel (not user) address space.
 	 */
 	set_fs(KERNEL_DS);
-	show_stacktrace(task, &regs);
+	show_stacktrace(task, &regs, loglvl);
 	set_fs(old_fs);
 }
 
@@ -371,7 +372,7 @@ void show_registers(struct pt_regs *regs)
 	if (!user_mode(regs))
 		/* Necessary for getting the correct stack content */
 		set_fs(KERNEL_DS);
-	show_stacktrace(current, regs);
+	show_stacktrace(current, regs, KERN_DEFAULT);
 	show_code((unsigned int __user *) regs->cp0_epc);
 	printk("\n");
 	set_fs(old_fs);
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index ca6fc4762d97..19b906a31c81 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -92,9 +92,6 @@
 #include <asm/mmu_context.h>
 #include <linux/uaccess.h>
 
-#define STR(x)	__STR(x)
-#define __STR(x)  #x
-
 enum {
 	UNALIGNED_ACTION_QUIET,
 	UNALIGNED_ACTION_SIGNAL,
@@ -108,778 +105,6 @@ static u32 unaligned_action;
 #endif
 extern void show_registers(struct pt_regs *regs);
 
-#ifdef __BIG_ENDIAN
-#define     _LoadHW(addr, value, res, type)  \
-do {                                                        \
-		__asm__ __volatile__ (".set\tnoat\n"        \
-			"1:\t"type##_lb("%0", "0(%2)")"\n"  \
-			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
-			"sll\t%0, 0x8\n\t"                  \
-			"or\t%0, $1\n\t"                    \
-			"li\t%1, 0\n"                       \
-			"3:\t.set\tat\n\t"                  \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define     _LoadW(addr, value, res, type)   \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\t"type##_lwl("%0", "(%2)")"\n"   \
-			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
-			"li\t%1, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without lwl instruction */
-#define     _LoadW(addr, value, res, type) \
-do {                                                        \
-		__asm__ __volatile__ (			    \
-			".set\tpush\n"			    \
-			".set\tnoat\n\t"		    \
-			"1:"type##_lb("%0", "0(%2)")"\n\t"  \
-			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"li\t%1, 0\n"			    \
-			".set\tpop\n"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%1, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			".previous"			    \
-			: "=&r" (value), "=r" (res)	    \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-#define     _LoadHWU(addr, value, res, type) \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			".set\tnoat\n"                      \
-			"1:\t"type##_lbu("%0", "0(%2)")"\n" \
-			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
-			"sll\t%0, 0x8\n\t"                  \
-			"or\t%0, $1\n\t"                    \
-			"li\t%1, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".set\tat\n\t"                      \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define     _LoadWU(addr, value, res, type)  \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\t"type##_lwl("%0", "(%2)")"\n"  \
-			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
-			"dsll\t%0, %0, 32\n\t"              \
-			"dsrl\t%0, %0, 32\n\t"              \
-			"li\t%1, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			"\t.section\t.fixup,\"ax\"\n\t"     \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#define     _LoadDW(addr, value, res)  \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\tldl\t%0, (%2)\n"               \
-			"2:\tldr\t%0, 7(%2)\n\t"            \
-			"li\t%1, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			"\t.section\t.fixup,\"ax\"\n\t"     \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without lwl and ldl instructions */
-#define	    _LoadWU(addr, value, res, type) \
-do {                                                        \
-		__asm__ __volatile__ (			    \
-			".set\tpush\n\t"		    \
-			".set\tnoat\n\t"		    \
-			"1:"type##_lbu("%0", "0(%2)")"\n\t" \
-			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"li\t%1, 0\n"			    \
-			".set\tpop\n"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%1, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			".previous"			    \
-			: "=&r" (value), "=r" (res)	    \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#define     _LoadDW(addr, value, res)  \
-do {                                                        \
-		__asm__ __volatile__ (			    \
-			".set\tpush\n\t"		    \
-			".set\tnoat\n\t"		    \
-			"1:lb\t%0, 0(%2)\n\t"    	    \
-			"2:lbu\t $1, 1(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"3:lbu\t$1, 2(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"4:lbu\t$1, 3(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"5:lbu\t$1, 4(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"6:lbu\t$1, 5(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"7:lbu\t$1, 6(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"8:lbu\t$1, 7(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"li\t%1, 0\n"			    \
-			".set\tpop\n\t"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%1, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			STR(PTR)"\t5b, 11b\n\t"		    \
-			STR(PTR)"\t6b, 11b\n\t"		    \
-			STR(PTR)"\t7b, 11b\n\t"		    \
-			STR(PTR)"\t8b, 11b\n\t"		    \
-			".previous"			    \
-			: "=&r" (value), "=r" (res)	    \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-
-#define     _StoreHW(addr, value, res, type) \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			".set\tnoat\n"                      \
-			"1:\t"type##_sb("%1", "1(%2)")"\n"  \
-			"srl\t$1, %1, 0x8\n"                \
-			"2:\t"type##_sb("$1", "0(%2)")"\n"  \
-			".set\tat\n\t"                      \
-			"li\t%0, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%0, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=r" (res)                        \
-			: "r" (value), "r" (addr), "i" (-EFAULT));\
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define     _StoreW(addr, value, res, type)  \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\t"type##_swl("%1", "(%2)")"\n"  \
-			"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
-			"li\t%0, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%0, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-		: "=r" (res)                                \
-		: "r" (value), "r" (addr), "i" (-EFAULT));  \
-} while(0)
-
-#define     _StoreDW(addr, value, res) \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\tsdl\t%1,(%2)\n"                \
-			"2:\tsdr\t%1, 7(%2)\n\t"            \
-			"li\t%0, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%0, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-		: "=r" (res)                                \
-		: "r" (value), "r" (addr), "i" (-EFAULT));  \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-#define     _StoreW(addr, value, res, type)  \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			".set\tpush\n\t"		    \
-			".set\tnoat\n\t"		    \
-			"1:"type##_sb("%1", "3(%2)")"\n\t"  \
-			"srl\t$1, %1, 0x8\n\t"		    \
-			"2:"type##_sb("$1", "2(%2)")"\n\t"  \
-			"srl\t$1, $1,  0x8\n\t"		    \
-			"3:"type##_sb("$1", "1(%2)")"\n\t"  \
-			"srl\t$1, $1, 0x8\n\t"		    \
-			"4:"type##_sb("$1", "0(%2)")"\n\t"  \
-			".set\tpop\n\t"			    \
-			"li\t%0, 0\n"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%0, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			".previous"			    \
-		: "=&r" (res)			    	    \
-		: "r" (value), "r" (addr), "i" (-EFAULT)    \
-		: "memory");                                \
-} while(0)
-
-#define     _StoreDW(addr, value, res) \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			".set\tpush\n\t"		    \
-			".set\tnoat\n\t"		    \
-			"1:sb\t%1, 7(%2)\n\t"    	    \
-			"dsrl\t$1, %1, 0x8\n\t"		    \
-			"2:sb\t$1, 6(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"3:sb\t$1, 5(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"4:sb\t$1, 4(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"5:sb\t$1, 3(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"6:sb\t$1, 2(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"7:sb\t$1, 1(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"8:sb\t$1, 0(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			".set\tpop\n\t"			    \
-			"li\t%0, 0\n"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%0, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			STR(PTR)"\t5b, 11b\n\t"		    \
-			STR(PTR)"\t6b, 11b\n\t"		    \
-			STR(PTR)"\t7b, 11b\n\t"		    \
-			STR(PTR)"\t8b, 11b\n\t"		    \
-			".previous"			    \
-		: "=&r" (res)			    	    \
-		: "r" (value), "r" (addr), "i" (-EFAULT)    \
-		: "memory");                                \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-#else /* __BIG_ENDIAN */
-
-#define     _LoadHW(addr, value, res, type)  \
-do {                                                        \
-		__asm__ __volatile__ (".set\tnoat\n"        \
-			"1:\t"type##_lb("%0", "1(%2)")"\n"  \
-			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
-			"sll\t%0, 0x8\n\t"                  \
-			"or\t%0, $1\n\t"                    \
-			"li\t%1, 0\n"                       \
-			"3:\t.set\tat\n\t"                  \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define     _LoadW(addr, value, res, type)   \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
-			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
-			"li\t%1, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without lwl instruction */
-#define     _LoadW(addr, value, res, type) \
-do {                                                        \
-		__asm__ __volatile__ (			    \
-			".set\tpush\n"			    \
-			".set\tnoat\n\t"		    \
-			"1:"type##_lb("%0", "3(%2)")"\n\t"  \
-			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"li\t%1, 0\n"			    \
-			".set\tpop\n"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%1, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			".previous"			    \
-			: "=&r" (value), "=r" (res)	    \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-
-#define     _LoadHWU(addr, value, res, type) \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			".set\tnoat\n"                      \
-			"1:\t"type##_lbu("%0", "1(%2)")"\n" \
-			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
-			"sll\t%0, 0x8\n\t"                  \
-			"or\t%0, $1\n\t"                    \
-			"li\t%1, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".set\tat\n\t"                      \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define     _LoadWU(addr, value, res, type)  \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
-			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
-			"dsll\t%0, %0, 32\n\t"              \
-			"dsrl\t%0, %0, 32\n\t"              \
-			"li\t%1, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			"\t.section\t.fixup,\"ax\"\n\t"     \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#define     _LoadDW(addr, value, res)  \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\tldl\t%0, 7(%2)\n"              \
-			"2:\tldr\t%0, (%2)\n\t"             \
-			"li\t%1, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			"\t.section\t.fixup,\"ax\"\n\t"     \
-			"4:\tli\t%1, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=&r" (value), "=r" (res)         \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without lwl and ldl instructions */
-#define	    _LoadWU(addr, value, res, type) \
-do {                                                        \
-		__asm__ __volatile__ (			    \
-			".set\tpush\n\t"		    \
-			".set\tnoat\n\t"		    \
-			"1:"type##_lbu("%0", "3(%2)")"\n\t" \
-			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
-			"sll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"li\t%1, 0\n"			    \
-			".set\tpop\n"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%1, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			".previous"			    \
-			: "=&r" (value), "=r" (res)	    \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-
-#define     _LoadDW(addr, value, res)  \
-do {                                                        \
-		__asm__ __volatile__ (			    \
-			".set\tpush\n\t"		    \
-			".set\tnoat\n\t"		    \
-			"1:lb\t%0, 7(%2)\n\t"    	    \
-			"2:lbu\t$1, 6(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"3:lbu\t$1, 5(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"4:lbu\t$1, 4(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"5:lbu\t$1, 3(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"6:lbu\t$1, 2(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"7:lbu\t$1, 1(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"8:lbu\t$1, 0(%2)\n\t"   	    \
-			"dsll\t%0, 0x8\n\t"		    \
-			"or\t%0, $1\n\t"		    \
-			"li\t%1, 0\n"			    \
-			".set\tpop\n\t"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%1, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			STR(PTR)"\t5b, 11b\n\t"		    \
-			STR(PTR)"\t6b, 11b\n\t"		    \
-			STR(PTR)"\t7b, 11b\n\t"		    \
-			STR(PTR)"\t8b, 11b\n\t"		    \
-			".previous"			    \
-			: "=&r" (value), "=r" (res)	    \
-			: "r" (addr), "i" (-EFAULT));       \
-} while(0)
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-#define     _StoreHW(addr, value, res, type) \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			".set\tnoat\n"                      \
-			"1:\t"type##_sb("%1", "0(%2)")"\n"  \
-			"srl\t$1,%1, 0x8\n"                 \
-			"2:\t"type##_sb("$1", "1(%2)")"\n"  \
-			".set\tat\n\t"                      \
-			"li\t%0, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%0, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-			: "=r" (res)                        \
-			: "r" (value), "r" (addr), "i" (-EFAULT));\
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define     _StoreW(addr, value, res, type)  \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\t"type##_swl("%1", "3(%2)")"\n" \
-			"2:\t"type##_swr("%1", "(%2)")"\n\t"\
-			"li\t%0, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%0, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-		: "=r" (res)                                \
-		: "r" (value), "r" (addr), "i" (-EFAULT));  \
-} while(0)
-
-#define     _StoreDW(addr, value, res) \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			"1:\tsdl\t%1, 7(%2)\n"              \
-			"2:\tsdr\t%1, (%2)\n\t"             \
-			"li\t%0, 0\n"                       \
-			"3:\n\t"                            \
-			".insn\n\t"                         \
-			".section\t.fixup,\"ax\"\n\t"       \
-			"4:\tli\t%0, %3\n\t"                \
-			"j\t3b\n\t"                         \
-			".previous\n\t"                     \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 4b\n\t"              \
-			STR(PTR)"\t2b, 4b\n\t"              \
-			".previous"                         \
-		: "=r" (res)                                \
-		: "r" (value), "r" (addr), "i" (-EFAULT));  \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without swl and sdl instructions */
-#define     _StoreW(addr, value, res, type)  \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			".set\tpush\n\t"		    \
-			".set\tnoat\n\t"		    \
-			"1:"type##_sb("%1", "0(%2)")"\n\t"  \
-			"srl\t$1, %1, 0x8\n\t"		    \
-			"2:"type##_sb("$1", "1(%2)")"\n\t"  \
-			"srl\t$1, $1,  0x8\n\t"		    \
-			"3:"type##_sb("$1", "2(%2)")"\n\t"  \
-			"srl\t$1, $1, 0x8\n\t"		    \
-			"4:"type##_sb("$1", "3(%2)")"\n\t"  \
-			".set\tpop\n\t"			    \
-			"li\t%0, 0\n"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%0, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			".previous"			    \
-		: "=&r" (res)			    	    \
-		: "r" (value), "r" (addr), "i" (-EFAULT)    \
-		: "memory");                                \
-} while(0)
-
-#define     _StoreDW(addr, value, res) \
-do {                                                        \
-		__asm__ __volatile__ (                      \
-			".set\tpush\n\t"		    \
-			".set\tnoat\n\t"		    \
-			"1:sb\t%1, 0(%2)\n\t"    	    \
-			"dsrl\t$1, %1, 0x8\n\t"		    \
-			"2:sb\t$1, 1(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"3:sb\t$1, 2(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"4:sb\t$1, 3(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"5:sb\t$1, 4(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"6:sb\t$1, 5(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"7:sb\t$1, 6(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			"8:sb\t$1, 7(%2)\n\t"    	    \
-			"dsrl\t$1, $1, 0x8\n\t"		    \
-			".set\tpop\n\t"			    \
-			"li\t%0, 0\n"			    \
-			"10:\n\t"			    \
-			".insn\n\t"			    \
-			".section\t.fixup,\"ax\"\n\t"	    \
-			"11:\tli\t%0, %3\n\t"		    \
-			"j\t10b\n\t"			    \
-			".previous\n\t"			    \
-			".section\t__ex_table,\"a\"\n\t"    \
-			STR(PTR)"\t1b, 11b\n\t"		    \
-			STR(PTR)"\t2b, 11b\n\t"		    \
-			STR(PTR)"\t3b, 11b\n\t"		    \
-			STR(PTR)"\t4b, 11b\n\t"		    \
-			STR(PTR)"\t5b, 11b\n\t"		    \
-			STR(PTR)"\t6b, 11b\n\t"		    \
-			STR(PTR)"\t7b, 11b\n\t"		    \
-			STR(PTR)"\t8b, 11b\n\t"		    \
-			".previous"			    \
-		: "=&r" (res)			    	    \
-		: "r" (value), "r" (addr), "i" (-EFAULT)    \
-		: "memory");                                \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-#endif
-
-#define LoadHWU(addr, value, res)	_LoadHWU(addr, value, res, kernel)
-#define LoadHWUE(addr, value, res)	_LoadHWU(addr, value, res, user)
-#define LoadWU(addr, value, res)	_LoadWU(addr, value, res, kernel)
-#define LoadWUE(addr, value, res)	_LoadWU(addr, value, res, user)
-#define LoadHW(addr, value, res)	_LoadHW(addr, value, res, kernel)
-#define LoadHWE(addr, value, res)	_LoadHW(addr, value, res, user)
-#define LoadW(addr, value, res)		_LoadW(addr, value, res, kernel)
-#define LoadWE(addr, value, res)	_LoadW(addr, value, res, user)
-#define LoadDW(addr, value, res)	_LoadDW(addr, value, res)
-
-#define StoreHW(addr, value, res)	_StoreHW(addr, value, res, kernel)
-#define StoreHWE(addr, value, res)	_StoreHW(addr, value, res, user)
-#define StoreW(addr, value, res)	_StoreW(addr, value, res, kernel)
-#define StoreWE(addr, value, res)	_StoreW(addr, value, res, user)
-#define StoreDW(addr, value, res)	_StoreDW(addr, value, res)
-
 static void emulate_load_store_insn(struct pt_regs *regs,
 	void __user *addr, unsigned int __user *pc)
 {
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index 8f05dd0a0f4e..9f50ceef9978 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -39,40 +39,39 @@
 #define VECTORSPACING 0x100	/* for EI/VI mode */
 #endif
 
-#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x)
 struct kvm_stats_debugfs_item debugfs_entries[] = {
-	{ "wait",	  VCPU_STAT(wait_exits),	 KVM_STAT_VCPU },
-	{ "cache",	  VCPU_STAT(cache_exits),	 KVM_STAT_VCPU },
-	{ "signal",	  VCPU_STAT(signal_exits),	 KVM_STAT_VCPU },
-	{ "interrupt",	  VCPU_STAT(int_exits),		 KVM_STAT_VCPU },
-	{ "cop_unusable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
-	{ "tlbmod",	  VCPU_STAT(tlbmod_exits),	 KVM_STAT_VCPU },
-	{ "tlbmiss_ld",	  VCPU_STAT(tlbmiss_ld_exits),	 KVM_STAT_VCPU },
-	{ "tlbmiss_st",	  VCPU_STAT(tlbmiss_st_exits),	 KVM_STAT_VCPU },
-	{ "addrerr_st",	  VCPU_STAT(addrerr_st_exits),	 KVM_STAT_VCPU },
-	{ "addrerr_ld",	  VCPU_STAT(addrerr_ld_exits),	 KVM_STAT_VCPU },
-	{ "syscall",	  VCPU_STAT(syscall_exits),	 KVM_STAT_VCPU },
-	{ "resvd_inst",	  VCPU_STAT(resvd_inst_exits),	 KVM_STAT_VCPU },
-	{ "break_inst",	  VCPU_STAT(break_inst_exits),	 KVM_STAT_VCPU },
-	{ "trap_inst",	  VCPU_STAT(trap_inst_exits),	 KVM_STAT_VCPU },
-	{ "msa_fpe",	  VCPU_STAT(msa_fpe_exits),	 KVM_STAT_VCPU },
-	{ "fpe",	  VCPU_STAT(fpe_exits),		 KVM_STAT_VCPU },
-	{ "msa_disabled", VCPU_STAT(msa_disabled_exits), KVM_STAT_VCPU },
-	{ "flush_dcache", VCPU_STAT(flush_dcache_exits), KVM_STAT_VCPU },
+	VCPU_STAT("wait", wait_exits),
+	VCPU_STAT("cache", cache_exits),
+	VCPU_STAT("signal", signal_exits),
+	VCPU_STAT("interrupt", int_exits),
+	VCPU_STAT("cop_unusable", cop_unusable_exits),
+	VCPU_STAT("tlbmod", tlbmod_exits),
+	VCPU_STAT("tlbmiss_ld", tlbmiss_ld_exits),
+	VCPU_STAT("tlbmiss_st", tlbmiss_st_exits),
+	VCPU_STAT("addrerr_st", addrerr_st_exits),
+	VCPU_STAT("addrerr_ld", addrerr_ld_exits),
+	VCPU_STAT("syscall", syscall_exits),
+	VCPU_STAT("resvd_inst", resvd_inst_exits),
+	VCPU_STAT("break_inst", break_inst_exits),
+	VCPU_STAT("trap_inst", trap_inst_exits),
+	VCPU_STAT("msa_fpe", msa_fpe_exits),
+	VCPU_STAT("fpe", fpe_exits),
+	VCPU_STAT("msa_disabled", msa_disabled_exits),
+	VCPU_STAT("flush_dcache", flush_dcache_exits),
 #ifdef CONFIG_KVM_MIPS_VZ
-	{ "vz_gpsi",	  VCPU_STAT(vz_gpsi_exits),	 KVM_STAT_VCPU },
-	{ "vz_gsfc",	  VCPU_STAT(vz_gsfc_exits),	 KVM_STAT_VCPU },
-	{ "vz_hc",	  VCPU_STAT(vz_hc_exits),	 KVM_STAT_VCPU },
-	{ "vz_grr",	  VCPU_STAT(vz_grr_exits),	 KVM_STAT_VCPU },
-	{ "vz_gva",	  VCPU_STAT(vz_gva_exits),	 KVM_STAT_VCPU },
-	{ "vz_ghfc",	  VCPU_STAT(vz_ghfc_exits),	 KVM_STAT_VCPU },
-	{ "vz_gpa",	  VCPU_STAT(vz_gpa_exits),	 KVM_STAT_VCPU },
-	{ "vz_resvd",	  VCPU_STAT(vz_resvd_exits),	 KVM_STAT_VCPU },
+	VCPU_STAT("vz_gpsi", vz_gpsi_exits),
+	VCPU_STAT("vz_gsfc", vz_gsfc_exits),
+	VCPU_STAT("vz_hc", vz_hc_exits),
+	VCPU_STAT("vz_grr", vz_grr_exits),
+	VCPU_STAT("vz_gva", vz_gva_exits),
+	VCPU_STAT("vz_ghfc", vz_ghfc_exits),
+	VCPU_STAT("vz_gpa", vz_gpa_exits),
+	VCPU_STAT("vz_resvd", vz_resvd_exits),
 #endif
-	{ "halt_successful_poll", VCPU_STAT(halt_successful_poll), KVM_STAT_VCPU },
-	{ "halt_attempted_poll", VCPU_STAT(halt_attempted_poll), KVM_STAT_VCPU },
-	{ "halt_poll_invalid", VCPU_STAT(halt_poll_invalid), KVM_STAT_VCPU },
-	{ "halt_wakeup",  VCPU_STAT(halt_wakeup),	 KVM_STAT_VCPU },
+	VCPU_STAT("halt_successful_poll", halt_successful_poll),
+	VCPU_STAT("halt_attempted_poll", halt_attempted_poll),
+	VCPU_STAT("halt_poll_invalid", halt_poll_invalid),
+	VCPU_STAT("halt_wakeup", halt_wakeup),
 	{NULL}
 };
 
@@ -439,8 +438,9 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	return -ENOIOCTLCMD;
 }
 
-int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
+int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 {
+	struct kvm_run *run = vcpu->run;
 	int r = -EINTR;
 
 	vcpu_load(vcpu);
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index e666fe26c50d..2119541a5b8b 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -95,16 +95,15 @@ int proc_lasat_ip(struct ctl_table *table, int write,
 		len = 0;
 		p = buffer;
 		while (len < *lenp) {
-			if (get_user(c, p++))
-				return -EFAULT;
+			c = *p;
+			p++;
 			if (c == 0 || c == '\n')
 				break;
 			len++;
 		}
 		if (len >= sizeof(ipbuf)-1)
 			len = sizeof(ipbuf) - 1;
-		if (copy_from_user(ipbuf, buffer, len))
-			return -EFAULT;
+		memcpy(ipbuf, buffer, len);
 		ipbuf[len] = 0;
 		*ppos += *lenp;
 		/* Now see if we can convert it to a valid IP */
@@ -122,11 +121,9 @@ int proc_lasat_ip(struct ctl_table *table, int write,
 		if (len > *lenp)
 			len = *lenp;
 		if (len)
-			if (copy_to_user(buffer, ipbuf, len))
-				return -EFAULT;
+			memcpy(buffer, ipbuf, len);
 		if (len < *lenp) {
-			if (put_user('\n', ((char *) buffer) + len))
-				return -EFAULT;
+			*((char *)buffer + len) = '\n';
 			len++;
 		}
 		*lenp = len;
diff --git a/arch/mips/loongson2ef/Kconfig b/arch/mips/loongson2ef/Kconfig
index 595dd48e1e4d..96dc6eba4310 100644
--- a/arch/mips/loongson2ef/Kconfig
+++ b/arch/mips/loongson2ef/Kconfig
@@ -46,7 +46,6 @@ config LEMOTE_MACH2F
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select HAVE_CLK
 	select FORCE_PCI
 	select I8259
 	select IRQ_MIPS_CPU
diff --git a/arch/mips/loongson2ef/lemote-2f/clock.c b/arch/mips/loongson2ef/lemote-2f/clock.c
index 414f282c8ab5..850b6b9f8f15 100644
--- a/arch/mips/loongson2ef/lemote-2f/clock.c
+++ b/arch/mips/loongson2ef/lemote-2f/clock.c
@@ -6,22 +6,12 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/errno.h>
 #include <linux/export.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
 
-#include <asm/clock.h>
 #include <asm/mach-loongson2ef/loongson.h>
 
-static LIST_HEAD(clock_list);
-static DEFINE_SPINLOCK(clock_lock);
-static DEFINE_MUTEX(clock_list_sem);
-
-/* Minimum CLK support */
 enum {
 	DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT,
 	DC_87PT, DC_DISABLE, DC_RESV
@@ -41,103 +31,21 @@ struct cpufreq_frequency_table loongson2_clockmod_table[] = {
 };
 EXPORT_SYMBOL_GPL(loongson2_clockmod_table);
 
-static struct clk cpu_clk = {
-	.name = "cpu_clk",
-	.flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
-	.rate = 800000000,
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return &cpu_clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-static void propagate_rate(struct clk *clk)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &clock_list, node) {
-		if (likely(clkp->parent != clk))
-			continue;
-		if (likely(clkp->ops && clkp->ops->recalc))
-			clkp->ops->recalc(clkp);
-		if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
-			propagate_rate(clkp);
-	}
-}
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
+int loongson2_cpu_set_rate(unsigned long rate_khz)
 {
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (!clk)
-		return 0;
-
-	return (unsigned long)clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int rate_khz = rate / 1000;
 	struct cpufreq_frequency_table *pos;
-	int ret = 0;
 	int regval;
 
-	if (likely(clk->ops && clk->ops->set_rate)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&clock_lock, flags);
-		ret = clk->ops->set_rate(clk, rate, 0);
-		spin_unlock_irqrestore(&clock_lock, flags);
-	}
-
-	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
-		propagate_rate(clk);
-
 	cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table)
 		if (rate_khz == pos->frequency)
 			break;
 	if (rate_khz != pos->frequency)
 		return -ENOTSUPP;
 
-	clk->rate = rate;
-
 	regval = readl(LOONGSON_CHIPCFG);
 	regval = (regval & ~0x7) | (pos->driver_data - 1);
 	writel(regval, LOONGSON_CHIPCFG);
 
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (likely(clk->ops && clk->ops->round_rate)) {
-		unsigned long flags, rounded;
-
-		spin_lock_irqsave(&clock_lock, flags);
-		rounded = clk->ops->round_rate(clk, rate);
-		spin_unlock_irqrestore(&clock_lock, flags);
-
-		return rounded;
-	}
-
-	return rate;
+	return 0;
 }
-EXPORT_SYMBOL_GPL(clk_round_rate);
+EXPORT_SYMBOL_GPL(loongson2_cpu_set_rate);
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index 48b29c198acf..517f1f8e81fb 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -4,18 +4,12 @@ if MACH_LOONGSON64
 config RS780_HPET
 	bool "RS780/SBX00 HPET Timer"
 	depends on MACH_LOONGSON64
+	depends on BROKEN
 	select MIPS_EXTERNAL_TIMER
 	help
 	  This option enables the hpet timer of AMD RS780/SBX00.
 
-	  If you want to enable the Loongson3 CPUFreq Driver, Please enable
-	  this option at first, otherwise, You will get wrong system time.
-
-	  If unsure, say Yes.
-
-
-config LOONGSON_MC146818
-	bool
-	default n
+	  Note: This driver is doing some dangerous hack. Please only enable
+	  it on RS780E systems.
 
 endif # MACH_LOONGSON64
diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile
index b7f40b179c71..6f3c2b47f66f 100644
--- a/arch/mips/loongson64/Makefile
+++ b/arch/mips/loongson64/Makefile
@@ -2,12 +2,11 @@
 #
 # Makefile for Loongson-3 family machines
 #
-obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o acpi_init.o dma.o \
+obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o dma.o \
 				setup.o init.o env.o time.o reset.o \
 
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_NUMA)	+= numa.o
 obj-$(CONFIG_RS780_HPET) += hpet.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 obj-$(CONFIG_SUSPEND) += pm.o
diff --git a/arch/mips/loongson64/acpi_init.c b/arch/mips/loongson64/acpi_init.c
deleted file mode 100644
index 8d7c119ddf91..000000000000
--- a/arch/mips/loongson64/acpi_init.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/export.h>
-
-#define SBX00_ACPI_IO_BASE 0x800
-#define SBX00_ACPI_IO_SIZE 0x100
-
-#define ACPI_PM_EVT_BLK         (SBX00_ACPI_IO_BASE + 0x00) /* 4 bytes */
-#define ACPI_PM_CNT_BLK         (SBX00_ACPI_IO_BASE + 0x04) /* 2 bytes */
-#define ACPI_PMA_CNT_BLK        (SBX00_ACPI_IO_BASE + 0x0F) /* 1 byte */
-#define ACPI_PM_TMR_BLK         (SBX00_ACPI_IO_BASE + 0x18) /* 4 bytes */
-#define ACPI_GPE0_BLK           (SBX00_ACPI_IO_BASE + 0x10) /* 8 bytes */
-#define ACPI_END                (SBX00_ACPI_IO_BASE + 0x80)
-
-#define PM_INDEX        0xCD6
-#define PM_DATA         0xCD7
-#define PM2_INDEX       0xCD0
-#define PM2_DATA        0xCD1
-
-/*
- * SCI interrupt need acpi space, allocate here
- */
-
-static int __init register_acpi_resource(void)
-{
-	request_region(SBX00_ACPI_IO_BASE, SBX00_ACPI_IO_SIZE, "acpi");
-	return 0;
-}
-
-static void pmio_write_index(u16 index, u8 reg, u8 value)
-{
-	outb(reg, index);
-	outb(value, index + 1);
-}
-
-static u8 pmio_read_index(u16 index, u8 reg)
-{
-	outb(reg, index);
-	return inb(index + 1);
-}
-
-void pm_iowrite(u8 reg, u8 value)
-{
-	pmio_write_index(PM_INDEX, reg, value);
-}
-EXPORT_SYMBOL(pm_iowrite);
-
-u8 pm_ioread(u8 reg)
-{
-	return pmio_read_index(PM_INDEX, reg);
-}
-EXPORT_SYMBOL(pm_ioread);
-
-void pm2_iowrite(u8 reg, u8 value)
-{
-	pmio_write_index(PM2_INDEX, reg, value);
-}
-EXPORT_SYMBOL(pm2_iowrite);
-
-u8 pm2_ioread(u8 reg)
-{
-	return pmio_read_index(PM2_INDEX, reg);
-}
-EXPORT_SYMBOL(pm2_ioread);
-
-static void acpi_hw_clear_status(void)
-{
-	u16 value;
-
-	/* PMStatus: Clear WakeStatus/PwrBtnStatus */
-	value = inw(ACPI_PM_EVT_BLK);
-	value |= (1 << 8 | 1 << 15);
-	outw(value, ACPI_PM_EVT_BLK);
-
-	/* GPEStatus: Clear all generated events */
-	outl(inl(ACPI_GPE0_BLK), ACPI_GPE0_BLK);
-}
-
-void acpi_registers_setup(void)
-{
-	u32 value;
-
-	/* PM Status Base */
-	pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xff);
-	pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8);
-
-	/* PM Control Base */
-	pm_iowrite(0x22, ACPI_PM_CNT_BLK & 0xff);
-	pm_iowrite(0x23, ACPI_PM_CNT_BLK >> 8);
-
-	/* GPM Base */
-	pm_iowrite(0x28, ACPI_GPE0_BLK & 0xff);
-	pm_iowrite(0x29, ACPI_GPE0_BLK >> 8);
-
-	/* ACPI End */
-	pm_iowrite(0x2e, ACPI_END & 0xff);
-	pm_iowrite(0x2f, ACPI_END >> 8);
-
-	/* IO Decode: When AcpiDecodeEnable set, South-Bridge uses the contents
-	 * of the PM registers at index 0x20~0x2B to decode ACPI I/O address. */
-	pm_iowrite(0x0e, 1 << 3);
-
-	/* SCI_EN set */
-	outw(1, ACPI_PM_CNT_BLK);
-
-	/* Enable to generate SCI */
-	pm_iowrite(0x10, pm_ioread(0x10) | 1);
-
-	/* GPM3/GPM9 enable */
-	value = inl(ACPI_GPE0_BLK + 4);
-	outl(value | (1 << 14) | (1 << 22), ACPI_GPE0_BLK + 4);
-
-	/* Set GPM9 as input */
-	pm_iowrite(0x8d, pm_ioread(0x8d) & (~(1 << 1)));
-
-	/* Set GPM9 as non-output */
-	pm_iowrite(0x94, pm_ioread(0x94) | (1 << 3));
-
-	/* GPM3 config ACPI trigger SCIOUT */
-	pm_iowrite(0x33, pm_ioread(0x33) & (~(3 << 4)));
-
-	/* GPM9 config ACPI trigger SCIOUT */
-	pm_iowrite(0x3d, pm_ioread(0x3d) & (~(3 << 2)));
-
-	/* GPM3 config falling edge trigger */
-	pm_iowrite(0x37, pm_ioread(0x37) & (~(1 << 6)));
-
-	/* No wait for STPGNT# in ACPI Sx state */
-	pm_iowrite(0x7c, pm_ioread(0x7c) | (1 << 6));
-
-	/* Set GPM3 pull-down enable */
-	value = pm2_ioread(0xf6);
-	value |= ((1 << 7) | (1 << 3));
-	pm2_iowrite(0xf6, value);
-
-	/* Set GPM9 pull-down enable */
-	value = pm2_ioread(0xf8);
-	value |= ((1 << 5) | (1 << 1));
-	pm2_iowrite(0xf8, value);
-}
-
-int __init sbx00_acpi_init(void)
-{
-	register_acpi_resource();
-	acpi_registers_setup();
-	acpi_hw_clear_status();
-
-	return 0;
-}
diff --git a/arch/mips/loongson64/cop2-ex.c b/arch/mips/loongson64/cop2-ex.c
index 9efdfe430ff0..af0600dfe83c 100644
--- a/arch/mips/loongson64/cop2-ex.c
+++ b/arch/mips/loongson64/cop2-ex.c
@@ -14,17 +14,29 @@
 #include <linux/sched.h>
 #include <linux/notifier.h>
 #include <linux/ptrace.h>
+#include <linux/uaccess.h>
+#include <linux/sched/signal.h>
 
 #include <asm/fpu.h>
 #include <asm/cop2.h>
+#include <asm/inst.h>
+#include <asm/branch.h>
 #include <asm/current.h>
 #include <asm/mipsregs.h>
 
 static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
 	void *data)
 {
-	int fpu_owned;
+	unsigned int res, fpu_owned;
+	unsigned long ra, value, value_next;
+	union mips_instruction insn;
 	int fr = !test_thread_flag(TIF_32BIT_FPREGS);
+	struct pt_regs *regs = (struct pt_regs *)data;
+	void __user *addr = (void __user *)regs->cp0_badvaddr;
+	unsigned int __user *pc = (unsigned int __user *)exception_epc(regs);
+
+	ra = regs->regs[31];
+	__get_user(insn.word, pc);
 
 	switch (action) {
 	case CU2_EXCEPTION:
@@ -49,9 +61,284 @@ static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
 		preempt_enable();
 
 		return NOTIFY_STOP;	/* Don't call default notifier */
+
+	case CU2_LWC2_OP:
+		if (insn.loongson3_lswc2_format.ls == 0)
+			goto sigbus;
+
+		if (insn.loongson3_lswc2_format.fr == 0) {	/* gslq */
+			if (!access_ok(addr, 16))
+				goto sigbus;
+
+			LoadDW(addr, value, res);
+			if (res)
+				goto fault;
+
+			LoadDW(addr + 8, value_next, res);
+			if (res)
+				goto fault;
+
+			regs->regs[insn.loongson3_lswc2_format.rt] = value;
+			regs->regs[insn.loongson3_lswc2_format.rq] = value_next;
+			compute_return_epc(regs);
+		} else {					/* gslqc1 */
+			if (!access_ok(addr, 16))
+				goto sigbus;
+
+			lose_fpu(1);
+			LoadDW(addr, value, res);
+			if (res)
+				goto fault;
+
+			LoadDW(addr + 8, value_next, res);
+			if (res)
+				goto fault;
+
+			set_fpr64(current->thread.fpu.fpr,
+				insn.loongson3_lswc2_format.rt, value);
+			set_fpr64(current->thread.fpu.fpr,
+				insn.loongson3_lswc2_format.rq, value_next);
+			compute_return_epc(regs);
+			own_fpu(1);
+		}
+		return NOTIFY_STOP;	/* Don't call default notifier */
+
+	case CU2_SWC2_OP:
+		if (insn.loongson3_lswc2_format.ls == 0)
+			goto sigbus;
+
+		if (insn.loongson3_lswc2_format.fr == 0) {	/* gssq */
+			if (!access_ok(addr, 16))
+				goto sigbus;
+
+			/* write upper 8 bytes first */
+			value_next = regs->regs[insn.loongson3_lswc2_format.rq];
+
+			StoreDW(addr + 8, value_next, res);
+			if (res)
+				goto fault;
+			value = regs->regs[insn.loongson3_lswc2_format.rt];
+
+			StoreDW(addr, value, res);
+			if (res)
+				goto fault;
+
+			compute_return_epc(regs);
+		} else {					/* gssqc1 */
+			if (!access_ok(addr, 16))
+				goto sigbus;
+
+			lose_fpu(1);
+			value_next = get_fpr64(current->thread.fpu.fpr,
+					insn.loongson3_lswc2_format.rq);
+
+			StoreDW(addr + 8, value_next, res);
+			if (res)
+				goto fault;
+
+			value = get_fpr64(current->thread.fpu.fpr,
+					insn.loongson3_lswc2_format.rt);
+
+			StoreDW(addr, value, res);
+			if (res)
+				goto fault;
+
+			compute_return_epc(regs);
+			own_fpu(1);
+		}
+		return NOTIFY_STOP;	/* Don't call default notifier */
+
+	case CU2_LDC2_OP:
+		switch (insn.loongson3_lsdc2_format.opcode1) {
+		/*
+		 * Loongson-3 overridden ldc2 instructions.
+		 * opcode1              instruction
+		 *   0x1          gslhx: load 2 bytes to GPR
+		 *   0x2          gslwx: load 4 bytes to GPR
+		 *   0x3          gsldx: load 8 bytes to GPR
+		 *   0x6	  gslwxc1: load 4 bytes to FPR
+		 *   0x7	  gsldxc1: load 8 bytes to FPR
+		 */
+		case 0x1:
+			if (!access_ok(addr, 2))
+				goto sigbus;
+
+			LoadHW(addr, value, res);
+			if (res)
+				goto fault;
+
+			compute_return_epc(regs);
+			regs->regs[insn.loongson3_lsdc2_format.rt] = value;
+			break;
+		case 0x2:
+			if (!access_ok(addr, 4))
+				goto sigbus;
+
+			LoadW(addr, value, res);
+			if (res)
+				goto fault;
+
+			compute_return_epc(regs);
+			regs->regs[insn.loongson3_lsdc2_format.rt] = value;
+			break;
+		case 0x3:
+			if (!access_ok(addr, 8))
+				goto sigbus;
+
+			LoadDW(addr, value, res);
+			if (res)
+				goto fault;
+
+			compute_return_epc(regs);
+			regs->regs[insn.loongson3_lsdc2_format.rt] = value;
+			break;
+		case 0x6:
+			die_if_kernel("Unaligned FP access in kernel code", regs);
+			BUG_ON(!used_math());
+			if (!access_ok(addr, 4))
+				goto sigbus;
+
+			lose_fpu(1);
+			LoadW(addr, value, res);
+			if (res)
+				goto fault;
+
+			set_fpr64(current->thread.fpu.fpr,
+					insn.loongson3_lsdc2_format.rt, value);
+			compute_return_epc(regs);
+			own_fpu(1);
+
+			break;
+		case 0x7:
+			die_if_kernel("Unaligned FP access in kernel code", regs);
+			BUG_ON(!used_math());
+			if (!access_ok(addr, 8))
+				goto sigbus;
+
+			lose_fpu(1);
+			LoadDW(addr, value, res);
+			if (res)
+				goto fault;
+
+			set_fpr64(current->thread.fpu.fpr,
+					insn.loongson3_lsdc2_format.rt, value);
+			compute_return_epc(regs);
+			own_fpu(1);
+			break;
+
+		}
+		return NOTIFY_STOP;	/* Don't call default notifier */
+
+	case CU2_SDC2_OP:
+		switch (insn.loongson3_lsdc2_format.opcode1) {
+		/*
+		 * Loongson-3 overridden sdc2 instructions.
+		 * opcode1              instruction
+		 *   0x1          gsshx: store 2 bytes from GPR
+		 *   0x2          gsswx: store 4 bytes from GPR
+		 *   0x3          gssdx: store 8 bytes from GPR
+		 *   0x6          gsswxc1: store 4 bytes from FPR
+		 *   0x7          gssdxc1: store 8 bytes from FPR
+		 */
+		case 0x1:
+			if (!access_ok(addr, 2))
+				goto sigbus;
+
+			compute_return_epc(regs);
+			value = regs->regs[insn.loongson3_lsdc2_format.rt];
+
+			StoreHW(addr, value, res);
+			if (res)
+				goto fault;
+
+			break;
+		case 0x2:
+			if (!access_ok(addr, 4))
+				goto sigbus;
+
+			compute_return_epc(regs);
+			value = regs->regs[insn.loongson3_lsdc2_format.rt];
+
+			StoreW(addr, value, res);
+			if (res)
+				goto fault;
+
+			break;
+		case 0x3:
+			if (!access_ok(addr, 8))
+				goto sigbus;
+
+			compute_return_epc(regs);
+			value = regs->regs[insn.loongson3_lsdc2_format.rt];
+
+			StoreDW(addr, value, res);
+			if (res)
+				goto fault;
+
+			break;
+
+		case 0x6:
+			die_if_kernel("Unaligned FP access in kernel code", regs);
+			BUG_ON(!used_math());
+
+			if (!access_ok(addr, 4))
+				goto sigbus;
+
+			lose_fpu(1);
+			value = get_fpr64(current->thread.fpu.fpr,
+					insn.loongson3_lsdc2_format.rt);
+
+			StoreW(addr, value, res);
+			if (res)
+				goto fault;
+
+			compute_return_epc(regs);
+			own_fpu(1);
+
+			break;
+		case 0x7:
+			die_if_kernel("Unaligned FP access in kernel code", regs);
+			BUG_ON(!used_math());
+
+			if (!access_ok(addr, 8))
+				goto sigbus;
+
+			lose_fpu(1);
+			value = get_fpr64(current->thread.fpu.fpr,
+					insn.loongson3_lsdc2_format.rt);
+
+			StoreDW(addr, value, res);
+			if (res)
+				goto fault;
+
+			compute_return_epc(regs);
+			own_fpu(1);
+
+			break;
+		}
+		return NOTIFY_STOP;	/* Don't call default notifier */
 	}
 
 	return NOTIFY_OK;		/* Let default notifier send signals */
+
+fault:
+	/* roll back jump/branch */
+	regs->regs[31] = ra;
+	regs->cp0_epc = (unsigned long)pc;
+	/* Did we have an exception handler installed? */
+	if (fixup_exception(regs))
+		return NOTIFY_STOP;	/* Don't call default notifier */
+
+	die_if_kernel("Unhandled kernel unaligned access", regs);
+	force_sig(SIGSEGV);
+
+	return NOTIFY_STOP;	/* Don't call default notifier */
+
+sigbus:
+	die_if_kernel("Unhandled kernel unaligned access", regs);
+	force_sig(SIGBUS);
+
+	return NOTIFY_STOP;	/* Don't call default notifier */
 }
 
 static int __init loongson_cu2_setup(void)
diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
index 2554ef11170d..71f4aaf58791 100644
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -14,12 +14,15 @@
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  */
 #include <linux/export.h>
+#include <linux/pci_ids.h>
 #include <asm/bootinfo.h>
 #include <loongson.h>
 #include <boot_param.h>
 #include <builtin_dtbs.h>
 #include <workarounds.h>
 
+#define HOST_BRIDGE_CONFIG_ADDR	((void __iomem *)TO_UNCAC(0x1a000000))
+
 u32 cpu_clock_freq;
 EXPORT_SYMBOL(cpu_clock_freq);
 struct efi_memory_map_loongson *loongson_memmap;
@@ -43,6 +46,8 @@ void __init prom_init_env(void)
 	struct system_loongson *esys;
 	struct efi_cpuinfo_loongson *ecpu;
 	struct irq_source_routing_table *eirq_source;
+	u32 id;
+	u16 vendor, device;
 
 	/* firmware arguments are initialized in head.S */
 	boot_p = (struct boot_params *)fw_arg2;
@@ -178,4 +183,17 @@ void __init prom_init_env(void)
 		memcpy(loongson_sysconf.sensors, esys->sensors,
 			sizeof(struct sensor_device) * loongson_sysconf.nr_sensors);
 	pr_info("CpuClock = %u\n", cpu_clock_freq);
+
+	/* Read the ID of PCI host bridge to detect bridge type */
+	id = readl(HOST_BRIDGE_CONFIG_ADDR);
+	vendor = id & 0xffff;
+	device = (id >> 16) & 0xffff;
+
+	if (vendor == PCI_VENDOR_ID_LOONGSON && device == 0x7a00) {
+		pr_info("The bridge chip is LS7A\n");
+		loongson_sysconf.bridgetype = LS7A;
+	} else {
+		pr_info("The bridge chip is RS780E or SR5690\n");
+		loongson_sysconf.bridgetype = RS780E;
+	}
 }
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index 1ae072df4831..901f5be5ee76 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -247,7 +247,7 @@ void __init paging_init(void)
 	zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
 #endif
 	zones_size[ZONE_NORMAL] = max_low_pfn;
-	free_area_init_nodes(zones_size);
+	free_area_init(zones_size);
 }
 
 void __init mem_init(void)
diff --git a/arch/mips/loongson64/pci.c b/arch/mips/loongson64/pci.c
index e84ae20c3290..a440a2725a20 100644
--- a/arch/mips/loongson64/pci.c
+++ b/arch/mips/loongson64/pci.c
@@ -43,8 +43,6 @@ static int __init pcibios_init(void)
 
 	register_pci_controller(&loongson_pci_controller);
 
-	sbx00_acpi_init();
-
 	return 0;
 }
 
diff --git a/arch/mips/loongson64/rtc.c b/arch/mips/loongson64/rtc.c
deleted file mode 100644
index 8d7628c0f513..000000000000
--- a/arch/mips/loongson64/rtc.c
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Lemote Fuloong platform support
- *
- *  Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mc146818rtc.h>
-
-static struct resource loongson_rtc_resources[] = {
-	{
-		.start	= RTC_PORT(0),
-		.end	= RTC_PORT(1),
-		.flags	= IORESOURCE_IO,
-	}, {
-		.start	= RTC_IRQ,
-		.end	= RTC_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device loongson_rtc_device = {
-	.name		= "rtc_cmos",
-	.id		= -1,
-	.resource	= loongson_rtc_resources,
-	.num_resources	= ARRAY_SIZE(loongson_rtc_resources),
-};
-
-
-static int __init loongson_rtc_platform_init(void)
-{
-	platform_device_register(&loongson_rtc_device);
-	return 0;
-}
-
-device_initcall(loongson_rtc_platform_init);
diff --git a/arch/mips/loongson64/smp.c b/arch/mips/loongson64/smp.c
index e1fe8bbb377d..e744e1bee49e 100644
--- a/arch/mips/loongson64/smp.c
+++ b/arch/mips/loongson64/smp.c
@@ -15,7 +15,6 @@
 #include <linux/kexec.h>
 #include <asm/processor.h>
 #include <asm/time.h>
-#include <asm/clock.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 #include <loongson.h>
diff --git a/arch/mips/loongson64/time.c b/arch/mips/loongson64/time.c
index 1245f22cec84..91e842b58365 100644
--- a/arch/mips/loongson64/time.c
+++ b/arch/mips/loongson64/time.c
@@ -6,7 +6,7 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  */
-#include <asm/mc146818-time.h>
+
 #include <asm/time.h>
 #include <asm/hpet.h>
 
@@ -21,9 +21,3 @@ void __init plat_time_init(void)
 	setup_hpet_timer();
 #endif
 }
-
-void read_persistent_clock64(struct timespec64 *ts)
-{
-	ts->tv_sec = mc146818_get_cmos_time();
-	ts->tv_nsec = 0;
-}
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 46f483e952c8..865926a37775 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -23,7 +23,7 @@ obj-y				+= uasm-mips.o
 endif
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
-obj-$(CONFIG_64BIT)		+= pgtable-64.o
+obj-$(CONFIG_64BIT)		+= ioremap64.o pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_DMA_NONCOHERENT)	+= dma-noncoherent.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 36a311348739..85eb62e40e2b 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1049,7 +1049,7 @@ static inline void rm7k_erratum31(void)
 			"cache\t%1, 0x3000(%0)\n\t"
 			".set pop\n"
 			:
-			: "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill));
+			: "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill_I));
 	}
 }
 
@@ -1303,7 +1303,8 @@ static void probe_pcache(void)
 					  c->dcache.linesz;
 		c->dcache.waybit = 0;
 		if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >=
-				(PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0))
+				(PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) ||
+				(c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
 			c->options |= MIPS_CPU_PREFETCH;
 		break;
 
@@ -1629,8 +1630,13 @@ static void __init loongson3_sc_init(void)
 	scache_size = c->scache.sets *
 				  c->scache.ways *
 				  c->scache.linesz;
-	/* Loongson-3 has 4 cores, 1MB scache for each. scaches are shared */
-	scache_size *= 4;
+
+	/* Loongson-3 has 4-Scache banks, while Loongson-2K have only 2 banks */
+	if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
+		scache_size *= 2;
+	else
+		scache_size *= 4;
+
 	c->scache.waybit = 0;
 	c->scache.waysize = scache_size / c->scache.ways;
 	pr_info("Unified secondary cache %ldkB %s, linesize %d bytes.\n",
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 79684000de0e..19719e8b41a5 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -418,7 +418,7 @@ void __init paging_init(void)
 	}
 #endif
 
-	free_area_init_nodes(max_zone_pfns);
+	free_area_init(max_zone_pfns);
 }
 
 #ifdef CONFIG_64BIT
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index 8317f337a86e..b6dad2fd5575 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -14,94 +14,13 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/mm_types.h>
+#include <linux/io.h>
 #include <asm/cacheflush.h>
-#include <asm/io.h>
 #include <asm/tlbflush.h>
+#include <ioremap.h>
 
-static inline void remap_area_pte(pte_t * pte, unsigned long address,
-	phys_addr_t size, phys_addr_t phys_addr, unsigned long flags)
-{
-	phys_addr_t end;
-	unsigned long pfn;
-	pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE
-				   | __WRITEABLE | flags);
-
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	BUG_ON(address >= end);
-	pfn = phys_addr >> PAGE_SHIFT;
-	do {
-		if (!pte_none(*pte)) {
-			printk("remap_area_pte: page already exists\n");
-			BUG();
-		}
-		set_pte(pte, pfn_pte(pfn, pgprot));
-		address += PAGE_SIZE;
-		pfn++;
-		pte++;
-	} while (address && (address < end));
-}
-
-static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
-	phys_addr_t size, phys_addr_t phys_addr, unsigned long flags)
-{
-	phys_addr_t end;
-
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	phys_addr -= address;
-	BUG_ON(address >= end);
-	do {
-		pte_t * pte = pte_alloc_kernel(pmd, address);
-		if (!pte)
-			return -ENOMEM;
-		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address && (address < end));
-	return 0;
-}
-
-static int remap_area_pages(unsigned long address, phys_addr_t phys_addr,
-	phys_addr_t size, unsigned long flags)
-{
-	int error;
-	pgd_t * dir;
-	unsigned long end = address + size;
-
-	phys_addr -= address;
-	dir = pgd_offset(&init_mm, address);
-	flush_cache_all();
-	BUG_ON(address >= end);
-	do {
-		p4d_t *p4d;
-		pud_t *pud;
-		pmd_t *pmd;
-
-		error = -ENOMEM;
-		p4d = p4d_alloc(&init_mm, dir, address);
-		if (!p4d)
-			break;
-		pud = pud_alloc(&init_mm, p4d, address);
-		if (!pud)
-			break;
-		pmd = pmd_alloc(&init_mm, pud, address);
-		if (!pmd)
-			break;
-		if (remap_area_pmd(pmd, address, end - address,
-					 phys_addr + address, flags))
-			break;
-		error = 0;
-		address = (address + PGDIR_SIZE) & PGDIR_MASK;
-		dir++;
-	} while (address && (address < end));
-	flush_tlb_all();
-	return error;
-}
+#define IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL))
+#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
 
 static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages,
 			       void *arg)
@@ -118,27 +37,25 @@ static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages,
 }
 
 /*
- * Generic mapping function (not visible outside):
- */
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
+ * ioremap_prot     -   map bus memory into CPU space
+ * @phys_addr:    bus address of the memory
+ * @size:      size of the resource to map
  *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
+ * ioremap_prot gives the caller control over cache coherency attributes (CCA)
  */
-
-#define IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL))
-
-void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long flags)
+void __iomem *ioremap_prot(phys_addr_t phys_addr, unsigned long size,
+		unsigned long prot_val)
 {
+	unsigned long flags = prot_val & _CACHE_MASK;
 	unsigned long offset, pfn, last_pfn;
-	struct vm_struct * area;
+	struct vm_struct *area;
 	phys_addr_t last_addr;
-	void * addr;
+	unsigned long vaddr;
+	void __iomem *cpu_addr;
+
+	cpu_addr = plat_ioremap(phys_addr, size, flags);
+	if (cpu_addr)
+		return cpu_addr;
 
 	phys_addr = fixup_bigphys_addr(phys_addr, size);
 
@@ -181,30 +98,22 @@ void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long
 	area = get_vm_area(size, VM_IOREMAP);
 	if (!area)
 		return NULL;
-	addr = area->addr;
-	if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
-		vunmap(addr);
+	vaddr = (unsigned long)area->addr;
+
+	flags |= _PAGE_GLOBAL | _PAGE_PRESENT | __READABLE | __WRITEABLE;
+	if (ioremap_page_range(vaddr, vaddr + size, phys_addr,
+			__pgprot(flags))) {
+		free_vm_area(area);
 		return NULL;
 	}
 
-	return (void __iomem *) (offset + (char *)addr);
+	return (void __iomem *)(vaddr + offset);
 }
+EXPORT_SYMBOL(ioremap_prot);
 
-#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
-
-void __iounmap(const volatile void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
 {
-	struct vm_struct *p;
-
-	if (IS_KSEG1(addr))
-		return;
-
-	p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
-	if (!p)
-		printk(KERN_ERR "iounmap: bad address %p\n", addr);
-
-	kfree(p);
+	if (!plat_iounmap(addr) && !IS_KSEG1(addr))
+		vunmap((void *)((unsigned long)addr & PAGE_MASK));
 }
-
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(__iounmap);
+EXPORT_SYMBOL(iounmap);
diff --git a/arch/mips/mm/ioremap64.c b/arch/mips/mm/ioremap64.c
new file mode 100644
index 000000000000..15e7820d6a5f
--- /dev/null
+++ b/arch/mips/mm/ioremap64.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/io.h>
+#include <ioremap.h>
+
+void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
+		unsigned long prot_val)
+{
+	unsigned long flags = prot_val & _CACHE_MASK;
+	u64 base = (flags == _CACHE_UNCACHED ? IO_BASE : UNCAC_BASE);
+	void __iomem *addr;
+
+	addr = plat_ioremap(offset, size, flags);
+	if (!addr)
+		addr = (void __iomem *)(unsigned long)(base + offset);
+	return addr;
+}
+EXPORT_SYMBOL(ioremap_prot);
+
+void iounmap(const volatile void __iomem *addr)
+{
+	plat_iounmap(addr);
+}
+EXPORT_SYMBOL(iounmap);
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d7db1533889a..f90303f31967 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -103,7 +103,7 @@ static irqreturn_t fmn_message_handler(int irq, void *data)
 				mflags = nlm_cop2_enable_irqsave();
 			}
 		}
-	};
+	}
 	/* Enable message ring intr, to any thread in core */
 	nlm_fmn_setup_intr(irq, (1 << nlm_threads_per_core) - 1);
 	nlm_cop2_disable_irqrestore(mflags);
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 03db268cba5c..d3996c4c6440 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -110,7 +110,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_LOONGSON64:
 		lmodel = &op_model_loongson3_ops;
 		break;
-	};
+	}
 
 	/*
 	 * Always set the backtrace. This allows unsupported CPU types to still
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index 01a2af8215c8..7285b5667568 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -52,7 +52,7 @@ struct alchemy_pci_context {
 static struct alchemy_pci_context *__alchemy_pci_ctx;
 
 
-/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr
+/* IO/MEM resources for PCI. Keep the memres in sync with fixup_bigphys_addr
  * in arch/mips/alchemy/common/setup.c
  */
 static struct resource alchemy_pci_def_memres = {
diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
index d1e59cec116e..e0f20f487d96 100644
--- a/arch/mips/pmcs-msp71xx/msp_setup.c
+++ b/arch/mips/pmcs-msp71xx/msp_setup.c
@@ -55,7 +55,7 @@ void msp7120_reset(void)
 
 	for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1));
 	     iptr < end; iptr += L1_CACHE_BYTES)
-		cache_op(Fill, iptr);
+		cache_op(Fill_I, iptr);
 
 	__asm__ __volatile__ (
 		"startpoint:					\n"
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index a45691e6ab90..1213215ea965 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -419,7 +419,7 @@ void __init paging_init(void)
 
 	pagetable_init();
 	zones_size[ZONE_NORMAL] = max_low_pfn;
-	free_area_init_nodes(zones_size);
+	free_area_init(zones_size);
 }
 
 void __init mem_init(void)
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 9a22a182b7a4..85c4c121c71f 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -58,7 +58,7 @@ config TOSHIBA_RBTX4939
 config SOC_TX3927
 	bool
 	select CEVT_TXX9
-	select HAS_TXX9_SERIAL
+	imply HAS_TXX9_SERIAL
 	select HAVE_PCI
 	select IRQ_TXX9
 	select GPIO_TXX9
@@ -66,30 +66,30 @@ config SOC_TX3927
 config SOC_TX4927
 	bool
 	select CEVT_TXX9
-	select HAS_TXX9_SERIAL
+	imply HAS_TXX9_SERIAL
 	select HAVE_PCI
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
-	select HAS_TXX9_ACLC
+	imply HAS_TXX9_ACLC
 
 config SOC_TX4938
 	bool
 	select CEVT_TXX9
-	select HAS_TXX9_SERIAL
+	imply HAS_TXX9_SERIAL
 	select HAVE_PCI
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
-	select HAS_TXX9_ACLC
+	imply HAS_TXX9_ACLC
 
 config SOC_TX4939
 	bool
 	select CEVT_TXX9
-	select HAS_TXX9_SERIAL
+	imply HAS_TXX9_SERIAL
 	select HAVE_PCI
 	select PCI_TX4927
-	select HAS_TXX9_ACLC
+	imply HAS_TXX9_ACLC
 
 config TXX9_7SEGLED
 	bool
diff --git a/arch/nds32/configs/defconfig b/arch/nds32/configs/defconfig
index 40313a635075..f9a89cf00aa6 100644
--- a/arch/nds32/configs/defconfig
+++ b/arch/nds32/configs/defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="nds32le-linux-"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/nds32/kernel/time.c b/arch/nds32/kernel/time.c
index ac9d78ce3a81..574a3d0a8539 100644
--- a/arch/nds32/kernel/time.c
+++ b/arch/nds32/kernel/time.c
@@ -2,7 +2,7 @@
 // Copyright (C) 2005-2017 Andes Technology Corporation
 
 #include <linux/clocksource.h>
-#include <linux/clk-provider.h>
+#include <linux/of_clk.h>
 
 void __init time_init(void)
 {
diff --git a/arch/nds32/kernel/traps.c b/arch/nds32/kernel/traps.c
index f4d386b52622..6a9772ba7392 100644
--- a/arch/nds32/kernel/traps.c
+++ b/arch/nds32/kernel/traps.c
@@ -97,18 +97,19 @@ static void dump_instr(struct pt_regs *regs)
 }
 
 #define LOOP_TIMES (100)
-static void __dump(struct task_struct *tsk, unsigned long *base_reg)
+static void __dump(struct task_struct *tsk, unsigned long *base_reg,
+		   const char *loglvl)
 {
 	unsigned long ret_addr;
 	int cnt = LOOP_TIMES, graph = 0;
-	pr_emerg("Call Trace:\n");
+	printk("%sCall Trace:\n", loglvl);
 	if (!IS_ENABLED(CONFIG_FRAME_POINTER)) {
 		while (!kstack_end(base_reg)) {
 			ret_addr = *base_reg++;
 			if (__kernel_text_address(ret_addr)) {
 				ret_addr = ftrace_graph_ret_addr(
 						tsk, &graph, ret_addr, NULL);
-				print_ip_sym(ret_addr);
+				print_ip_sym(loglvl, ret_addr);
 			}
 			if (--cnt < 0)
 				break;
@@ -124,17 +125,17 @@ static void __dump(struct task_struct *tsk, unsigned long *base_reg)
 
 				ret_addr = ftrace_graph_ret_addr(
 						tsk, &graph, ret_addr, NULL);
-				print_ip_sym(ret_addr);
+				print_ip_sym(loglvl, ret_addr);
 			}
 			if (--cnt < 0)
 				break;
 			base_reg = (unsigned long *)next_fp;
 		}
 	}
-	pr_emerg("\n");
+	printk("%s\n", loglvl);
 }
 
-void show_stack(struct task_struct *tsk, unsigned long *sp)
+void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 {
 	unsigned long *base_reg;
 
@@ -151,7 +152,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 		else
 			__asm__ __volatile__("\tori\t%0, $fp, #0\n":"=r"(base_reg));
 	}
-	__dump(tsk, base_reg);
+	__dump(tsk, base_reg, loglvl);
 	barrier();
 }
 
diff --git a/arch/nds32/mm/init.c b/arch/nds32/mm/init.c
index 0be3833f6814..91147cca4b64 100644
--- a/arch/nds32/mm/init.c
+++ b/arch/nds32/mm/init.c
@@ -31,16 +31,13 @@ EXPORT_SYMBOL(empty_zero_page);
 
 static void __init zone_sizes_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES];
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
-	/* Clear the zone sizes */
-	memset(zones_size, 0, sizeof(zones_size));
-
-	zones_size[ZONE_NORMAL] = max_low_pfn;
+	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
 #ifdef CONFIG_HIGHMEM
-	zones_size[ZONE_HIGHMEM] = max_pfn;
+	max_zone_pfn[ZONE_HIGHMEM] = max_pfn;
 #endif
-	free_area_init(zones_size);
+	free_area_init(max_zone_pfn);
 
 }
 
diff --git a/arch/nios2/include/asm/pgtable.h b/arch/nios2/include/asm/pgtable.h
index f98b7f4519ba..47a1a3ea5734 100644
--- a/arch/nios2/include/asm/pgtable.h
+++ b/arch/nios2/include/asm/pgtable.h
@@ -22,7 +22,6 @@
 #include <asm/tlbflush.h>
 
 #include <asm/pgtable-bits.h>
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
 #define FIRST_USER_ADDRESS	0UL
@@ -100,7 +99,7 @@ extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
  */
 static inline void set_pmd(pmd_t *pmdptr, pmd_t pmdval)
 {
-	pmdptr->pud.pgd.pgd = pmdval.pud.pgd.pgd;
+	*pmdptr = pmdval;
 }
 
 /* to find an entry in a page-table-directory */
diff --git a/arch/nios2/kernel/traps.c b/arch/nios2/kernel/traps.c
index 486db793923c..b172da4eb1a9 100644
--- a/arch/nios2/kernel/traps.c
+++ b/arch/nios2/kernel/traps.c
@@ -52,12 +52,13 @@ void _exception(int signo, struct pt_regs *regs, int code, unsigned long addr)
 }
 
 /*
- * The show_stack is an external API which we do not use ourselves.
+ * The show_stack() is external API which we do not use ourselves.
  */
 
 int kstack_depth_to_print = 48;
 
-void show_stack(struct task_struct *task, unsigned long *stack)
+void show_stack(struct task_struct *task, unsigned long *stack,
+		const char *loglvl)
 {
 	unsigned long *endstack, addr;
 	int i;
@@ -72,16 +73,16 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	addr = (unsigned long) stack;
 	endstack = (unsigned long *) PAGE_ALIGN(addr);
 
-	pr_emerg("Stack from %08lx:", (unsigned long)stack);
+	printk("%sStack from %08lx:", loglvl, (unsigned long)stack);
 	for (i = 0; i < kstack_depth_to_print; i++) {
 		if (stack + 1 > endstack)
 			break;
 		if (i % 8 == 0)
-			pr_emerg("\n       ");
-		pr_emerg(" %08lx", *stack++);
+			printk("%s\n       ", loglvl);
+		printk("%s %08lx", loglvl, *stack++);
 	}
 
-	pr_emerg("\nCall Trace:");
+	printk("%s\nCall Trace:", loglvl);
 	i = 0;
 	while (stack + 1 <= endstack) {
 		addr = *stack++;
@@ -97,11 +98,11 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 		     (addr <= (unsigned long) _etext))) {
 			if (i % 4 == 0)
 				pr_emerg("\n       ");
-			pr_emerg(" [<%08lx>]", addr);
+			printk("%s [<%08lx>]", loglvl, addr);
 			i++;
 		}
 	}
-	pr_emerg("\n");
+	printk("%s\n", loglvl);
 }
 
 void __init trap_init(void)
diff --git a/arch/nios2/mm/fault.c b/arch/nios2/mm/fault.c
index ec9d8a9c426f..964eac1a21d0 100644
--- a/arch/nios2/mm/fault.c
+++ b/arch/nios2/mm/fault.c
@@ -242,6 +242,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long cause,
 		 */
 		int offset = pgd_index(address);
 		pgd_t *pgd, *pgd_k;
+		p4d_t *p4d, *p4d_k;
 		pud_t *pud, *pud_k;
 		pmd_t *pmd, *pmd_k;
 		pte_t *pte_k;
@@ -253,8 +254,12 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long cause,
 			goto no_context;
 		set_pgd(pgd, *pgd_k);
 
-		pud = pud_offset(pgd, address);
-		pud_k = pud_offset(pgd_k, address);
+		p4d = p4d_offset(pgd, address);
+		p4d_k = p4d_offset(pgd_k, address);
+		if (!p4d_present(*p4d_k))
+			goto no_context;
+		pud = pud_offset(p4d, address);
+		pud_k = pud_offset(p4d_k, address);
 		if (!pud_present(*pud_k))
 			goto no_context;
 		pmd = pmd_offset(pud, address);
diff --git a/arch/nios2/mm/init.c b/arch/nios2/mm/init.c
index 2c609c2516b2..9afca77d10b1 100644
--- a/arch/nios2/mm/init.c
+++ b/arch/nios2/mm/init.c
@@ -46,17 +46,15 @@ pgd_t *pgd_current;
  */
 void __init paging_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES];
-
-	memset(zones_size, 0, sizeof(zones_size));
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
 	pagetable_init();
 	pgd_current = swapper_pg_dir;
 
-	zones_size[ZONE_NORMAL] = max_mapnr;
+	max_zone_pfn[ZONE_NORMAL] = max_mapnr;
 
 	/* pass the memory from the bootmem allocator to the main allocator */
-	free_area_init(zones_size);
+	free_area_init(max_zone_pfn);
 
 	flush_dcache_range((unsigned long)empty_zero_page,
 			(unsigned long)empty_zero_page + PAGE_SIZE);
diff --git a/arch/nios2/mm/ioremap.c b/arch/nios2/mm/ioremap.c
index 819bdfcc2e71..fe821efb9a99 100644
--- a/arch/nios2/mm/ioremap.c
+++ b/arch/nios2/mm/ioremap.c
@@ -86,11 +86,15 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	if (address >= end)
 		BUG();
 	do {
+		p4d_t *p4d;
 		pud_t *pud;
 		pmd_t *pmd;
 
 		error = -ENOMEM;
-		pud = pud_alloc(&init_mm, dir, address);
+		p4d = p4d_alloc(&init_mm, dir, address);
+		if (!p4d)
+			break;
+		pud = pud_alloc(&init_mm, p4d, address);
 		if (!pud)
 			break;
 		pmd = pmd_alloc(&init_mm, pud, address);
diff --git a/arch/openrisc/include/asm/pgtable.h b/arch/openrisc/include/asm/pgtable.h
index 7f3fb9ceb083..219979e57790 100644
--- a/arch/openrisc/include/asm/pgtable.h
+++ b/arch/openrisc/include/asm/pgtable.h
@@ -21,7 +21,6 @@
 #ifndef __ASM_OPENRISC_PGTABLE_H
 #define __ASM_OPENRISC_PGTABLE_H
 
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
 #ifndef __ASSEMBLY__
diff --git a/arch/openrisc/kernel/traps.c b/arch/openrisc/kernel/traps.c
index c11aa2e17ce0..3022b0ad142c 100644
--- a/arch/openrisc/kernel/traps.c
+++ b/arch/openrisc/kernel/traps.c
@@ -41,18 +41,20 @@ unsigned long __user *lwa_addr;
 
 void print_trace(void *data, unsigned long addr, int reliable)
 {
-	pr_emerg("[<%p>] %s%pS\n", (void *) addr, reliable ? "" : "? ",
+	const char *loglvl = data;
+
+	printk("%s[<%p>] %s%pS\n", loglvl, (void *) addr, reliable ? "" : "? ",
 	       (void *) addr);
 }
 
 /* displays a short stack trace */
-void show_stack(struct task_struct *task, unsigned long *esp)
+void show_stack(struct task_struct *task, unsigned long *esp, const char *loglvl)
 {
 	if (esp == NULL)
 		esp = (unsigned long *)&esp;
 
-	pr_emerg("Call trace:\n");
-	unwind_stack(NULL, esp, print_trace);
+	printk("%sCall trace:\n", loglvl);
+	unwind_stack((void *)loglvl, esp, print_trace);
 }
 
 void show_registers(struct pt_regs *regs)
@@ -96,7 +98,7 @@ void show_registers(struct pt_regs *regs)
 	if (in_kernel) {
 
 		printk("\nStack: ");
-		show_stack(NULL, (unsigned long *)esp);
+		show_stack(NULL, (unsigned long *)esp, KERN_EMERG);
 
 		printk("\nCode: ");
 		if (regs->pc < PAGE_OFFSET)
diff --git a/arch/openrisc/mm/fault.c b/arch/openrisc/mm/fault.c
index 8af1cc78c4fb..6e0a11ac4c00 100644
--- a/arch/openrisc/mm/fault.c
+++ b/arch/openrisc/mm/fault.c
@@ -295,6 +295,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
 
 		int offset = pgd_index(address);
 		pgd_t *pgd, *pgd_k;
+		p4d_t *p4d, *p4d_k;
 		pud_t *pud, *pud_k;
 		pmd_t *pmd, *pmd_k;
 		pte_t *pte_k;
@@ -321,8 +322,13 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
 		 * it exists.
 		 */
 
-		pud = pud_offset(pgd, address);
-		pud_k = pud_offset(pgd_k, address);
+		p4d = p4d_offset(pgd, address);
+		p4d_k = p4d_offset(pgd_k, address);
+		if (!p4d_present(*p4d_k))
+			goto no_context;
+
+		pud = pud_offset(p4d, address);
+		pud_k = pud_offset(p4d_k, address);
 		if (!pud_present(*pud_k))
 			goto no_context;
 
diff --git a/arch/openrisc/mm/init.c b/arch/openrisc/mm/init.c
index 1f87b524db78..3bcdc1c26b23 100644
--- a/arch/openrisc/mm/init.c
+++ b/arch/openrisc/mm/init.c
@@ -45,17 +45,14 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
 static void __init zone_sizes_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES];
-
-	/* Clear the zone sizes */
-	memset(zones_size, 0, sizeof(zones_size));
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
 	/*
 	 * We use only ZONE_NORMAL
 	 */
-	zones_size[ZONE_NORMAL] = max_low_pfn;
+	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
 
-	free_area_init(zones_size);
+	free_area_init(max_zone_pfn);
 }
 
 extern const char _s_kernel_ro[], _e_kernel_ro[];
@@ -71,6 +68,7 @@ static void __init map_ram(void)
 	unsigned long v, p, e;
 	pgprot_t prot;
 	pgd_t *pge;
+	p4d_t *p4e;
 	pud_t *pue;
 	pmd_t *pme;
 	pte_t *pte;
@@ -90,7 +88,8 @@ static void __init map_ram(void)
 
 		while (p < e) {
 			int j;
-			pue = pud_offset(pge, v);
+			p4e = p4d_offset(pge, v);
+			pue = pud_offset(p4e, v);
 			pme = pmd_offset(pue, v);
 
 			if ((u32) pue != (u32) pge || (u32) pme != (u32) pge) {
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index e1a8fee3ad49..d46b6709ec56 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -300,7 +300,7 @@ static ssize_t perf_write(struct file *file, const char __user *buf,
 	else
 		return -EFAULT;
 
-	if (!capable(CAP_SYS_ADMIN))
+	if (!perfmon_capable())
 		return -EACCES;
 
 	if (count != sizeof(uint32_t))
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index 52a15f5cd130..3cbf5f5edab5 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -435,3 +435,4 @@
 435	common	clone3				sys_clone3_wrapper
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
+439	common	process_madvise			sys_process_madvise		compat_sys_process_madvise
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 82fc01189488..0a89899f154a 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -49,7 +49,7 @@
 #include "../math-emu/math-emu.h"	/* for handle_fpe() */
 
 static void parisc_show_stack(struct task_struct *task,
-	struct pt_regs *regs);
+	struct pt_regs *regs, const char *loglvl);
 
 static int printbinary(char *buf, unsigned long x, int nbits)
 {
@@ -155,7 +155,7 @@ void show_regs(struct pt_regs *regs)
 		printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
 		printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
 
-		parisc_show_stack(current, regs);
+		parisc_show_stack(current, regs, KERN_DEFAULT);
 	}
 }
 
@@ -170,37 +170,37 @@ static DEFINE_RATELIMIT_STATE(_hppa_rs,
 }
 
 
-static void do_show_stack(struct unwind_frame_info *info)
+static void do_show_stack(struct unwind_frame_info *info, const char *loglvl)
 {
 	int i = 1;
 
-	printk(KERN_CRIT "Backtrace:\n");
+	printk("%sBacktrace:\n", loglvl);
 	while (i <= MAX_UNWIND_ENTRIES) {
 		if (unwind_once(info) < 0 || info->ip == 0)
 			break;
 
 		if (__kernel_text_address(info->ip)) {
-			printk(KERN_CRIT " [<" RFMT ">] %pS\n",
-				info->ip, (void *) info->ip);
+			printk("%s [<" RFMT ">] %pS\n",
+				loglvl, info->ip, (void *) info->ip);
 			i++;
 		}
 	}
-	printk(KERN_CRIT "\n");
+	printk("%s\n", loglvl);
 }
 
 static void parisc_show_stack(struct task_struct *task,
-	struct pt_regs *regs)
+	struct pt_regs *regs, const char *loglvl)
 {
 	struct unwind_frame_info info;
 
 	unwind_frame_init_task(&info, task, regs);
 
-	do_show_stack(&info);
+	do_show_stack(&info, loglvl);
 }
 
-void show_stack(struct task_struct *t, unsigned long *sp)
+void show_stack(struct task_struct *t, unsigned long *sp, const char *loglvl)
 {
-	parisc_show_stack(t, NULL);
+	parisc_show_stack(t, NULL, loglvl);
 }
 
 int is_valid_bugaddr(unsigned long iaoq)
@@ -446,7 +446,7 @@ void parisc_terminate(char *msg, struct pt_regs *regs, int code, unsigned long o
 		/* show_stack(NULL, (unsigned long *)regs->gr[30]); */
 		struct unwind_frame_info info;
 		unwind_frame_init(&info, current, regs);
-		do_show_stack(&info);
+		do_show_stack(&info, KERN_CRIT);
 	}
 
 	printk("\n");
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 5224fb38d766..02d2fdb85dcc 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -675,27 +675,11 @@ static void __init gateway_init(void)
 
 static void __init parisc_bootmem_free(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES] = { 0, };
-	unsigned long holes_size[MAX_NR_ZONES] = { 0, };
-	unsigned long mem_start_pfn = ~0UL, mem_end_pfn = 0, mem_size_pfn = 0;
-	int i;
-
-	for (i = 0; i < npmem_ranges; i++) {
-		unsigned long start = pmem_ranges[i].start_pfn;
-		unsigned long size = pmem_ranges[i].pages;
-		unsigned long end = start + size;
-
-		if (mem_start_pfn > start)
-			mem_start_pfn = start;
-		if (mem_end_pfn < end)
-			mem_end_pfn = end;
-		mem_size_pfn += size;
-	}
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0, };
 
-	zones_size[0] = mem_end_pfn - mem_start_pfn;
-	holes_size[0] = zones_size[0] - mem_size_pfn;
+	max_zone_pfn[0] = memblock_end_of_DRAM();
 
-	free_area_init_node(0, zones_size, mem_start_pfn, holes_size);
+	free_area_init(max_zone_pfn);
 }
 
 void __init paging_init(void)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 924c541a9260..b2f3ba75d14f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -116,6 +116,7 @@ config PPC
 	#
 	select ARCH_32BIT_OFF_T if PPC32
 	select ARCH_HAS_DEBUG_VIRTUAL
+	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -210,7 +211,6 @@ config PPC
 	select HAVE_KRETPROBES
 	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
 	select HAVE_LIVEPATCH			if HAVE_DYNAMIC_FTRACE_WITH_REGS
-	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI				if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if (PPC64 && PPC_BOOK3S)
@@ -686,15 +686,6 @@ config ARCH_MEMORY_PROBE
 	def_bool y
 	depends on MEMORY_HOTPLUG
 
-# Some NUMA nodes have memory ranges that span
-# other nodes.  Even though a pfn is valid and
-# between a node's start and end pfns, it may not
-# reside on that node.  See memmap_init_zone()
-# for details.
-config NODES_SPAN_OTHER_NODES
-	def_bool y
-	depends on NEED_MULTIPLE_NODES
-
 config STDBINUTILS
 	bool "Using standard binutils settings"
 	depends on 44x
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index 7549393c4c43..6052b72216a6 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -2,7 +2,6 @@
 #ifndef _ASM_POWERPC_BOOK3S_32_PGTABLE_H
 #define _ASM_POWERPC_BOOK3S_32_PGTABLE_H
 
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
 #include <asm/book3s/32/hash.h>
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
index 6fc4520092c7..73ad038ed10b 100644
--- a/arch/powerpc/include/asm/book3s/64/hash.h
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -134,9 +134,9 @@ static inline int get_region_id(unsigned long ea)
 
 #define	hash__pmd_bad(pmd)		(pmd_val(pmd) & H_PMD_BAD_BITS)
 #define	hash__pud_bad(pud)		(pud_val(pud) & H_PUD_BAD_BITS)
-static inline int hash__pgd_bad(pgd_t pgd)
+static inline int hash__p4d_bad(p4d_t p4d)
 {
-	return (pgd_val(pgd) == 0);
+	return (p4d_val(p4d) == 0);
 }
 #ifdef CONFIG_STRICT_KERNEL_RWX
 extern void hash__mark_rodata_ro(void);
diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index bb3deb76c951..f0a9ff690881 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -116,6 +116,9 @@ typedef struct {
 	/* Number of users of the external (Nest) MMU */
 	atomic_t copros;
 
+	/* Number of user space windows opened in process mm_context */
+	atomic_t vas_windows;
+
 	struct hash_mm_context *hash_context;
 
 	unsigned long vdso_base;
diff --git a/arch/powerpc/include/asm/book3s/64/pgalloc.h b/arch/powerpc/include/asm/book3s/64/pgalloc.h
index a41e91bd0580..69c5b051734f 100644
--- a/arch/powerpc/include/asm/book3s/64/pgalloc.h
+++ b/arch/powerpc/include/asm/book3s/64/pgalloc.h
@@ -85,9 +85,9 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 	kmem_cache_free(PGT_CACHE(PGD_INDEX_SIZE), pgd);
 }
 
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+static inline void p4d_populate(struct mm_struct *mm, p4d_t *pgd, pud_t *pud)
 {
-	*pgd =  __pgd(__pgtable_ptr_val(pud) | PGD_VAL_BITS);
+	*pgd =  __p4d(__pgtable_ptr_val(pud) | PGD_VAL_BITS);
 }
 
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 368b136517e0..87168eb9490c 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_POWERPC_BOOK3S_64_PGTABLE_H_
 #define _ASM_POWERPC_BOOK3S_64_PGTABLE_H_
 
-#include <asm-generic/5level-fixup.h>
+#include <asm-generic/pgtable-nop4d.h>
 
 #ifndef __ASSEMBLY__
 #include <linux/mmdebug.h>
@@ -251,7 +251,7 @@ extern unsigned long __pmd_frag_size_shift;
 /* Bits to mask out from a PUD to get to the PMD page */
 #define PUD_MASKED_BITS		0xc0000000000000ffUL
 /* Bits to mask out from a PGD to get to the PUD page */
-#define PGD_MASKED_BITS		0xc0000000000000ffUL
+#define P4D_MASKED_BITS		0xc0000000000000ffUL
 
 /*
  * Used as an indicator for rcu callback functions
@@ -949,54 +949,60 @@ static inline bool pud_access_permitted(pud_t pud, bool write)
 	return pte_access_permitted(pud_pte(pud), write);
 }
 
-#define pgd_write(pgd)		pte_write(pgd_pte(pgd))
+#define __p4d_raw(x)	((p4d_t) { __pgd_raw(x) })
+static inline __be64 p4d_raw(p4d_t x)
+{
+	return pgd_raw(x.pgd);
+}
+
+#define p4d_write(p4d)		pte_write(p4d_pte(p4d))
 
-static inline void pgd_clear(pgd_t *pgdp)
+static inline void p4d_clear(p4d_t *p4dp)
 {
-	*pgdp = __pgd(0);
+	*p4dp = __p4d(0);
 }
 
-static inline int pgd_none(pgd_t pgd)
+static inline int p4d_none(p4d_t p4d)
 {
-	return !pgd_raw(pgd);
+	return !p4d_raw(p4d);
 }
 
-static inline int pgd_present(pgd_t pgd)
+static inline int p4d_present(p4d_t p4d)
 {
-	return !!(pgd_raw(pgd) & cpu_to_be64(_PAGE_PRESENT));
+	return !!(p4d_raw(p4d) & cpu_to_be64(_PAGE_PRESENT));
 }
 
-static inline pte_t pgd_pte(pgd_t pgd)
+static inline pte_t p4d_pte(p4d_t p4d)
 {
-	return __pte_raw(pgd_raw(pgd));
+	return __pte_raw(p4d_raw(p4d));
 }
 
-static inline pgd_t pte_pgd(pte_t pte)
+static inline p4d_t pte_p4d(pte_t pte)
 {
-	return __pgd_raw(pte_raw(pte));
+	return __p4d_raw(pte_raw(pte));
 }
 
-static inline int pgd_bad(pgd_t pgd)
+static inline int p4d_bad(p4d_t p4d)
 {
 	if (radix_enabled())
-		return radix__pgd_bad(pgd);
-	return hash__pgd_bad(pgd);
+		return radix__p4d_bad(p4d);
+	return hash__p4d_bad(p4d);
 }
 
-#define pgd_access_permitted pgd_access_permitted
-static inline bool pgd_access_permitted(pgd_t pgd, bool write)
+#define p4d_access_permitted p4d_access_permitted
+static inline bool p4d_access_permitted(p4d_t p4d, bool write)
 {
-	return pte_access_permitted(pgd_pte(pgd), write);
+	return pte_access_permitted(p4d_pte(p4d), write);
 }
 
-extern struct page *pgd_page(pgd_t pgd);
+extern struct page *p4d_page(p4d_t p4d);
 
 /* Pointers in the page table tree are physical addresses */
 #define __pgtable_ptr_val(ptr)	__pa(ptr)
 
 #define pmd_page_vaddr(pmd)	__va(pmd_val(pmd) & ~PMD_MASKED_BITS)
 #define pud_page_vaddr(pud)	__va(pud_val(pud) & ~PUD_MASKED_BITS)
-#define pgd_page_vaddr(pgd)	__va(pgd_val(pgd) & ~PGD_MASKED_BITS)
+#define p4d_page_vaddr(p4d)	__va(p4d_val(p4d) & ~P4D_MASKED_BITS)
 
 #define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & (PTRS_PER_PGD - 1))
 #define pud_index(address) (((address) >> (PUD_SHIFT)) & (PTRS_PER_PUD - 1))
@@ -1010,8 +1016,8 @@ extern struct page *pgd_page(pgd_t pgd);
 
 #define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
 
-#define pud_offset(pgdp, addr)	\
-	(((pud_t *) pgd_page_vaddr(*(pgdp))) + pud_index(addr))
+#define pud_offset(p4dp, addr)	\
+	(((pud_t *) p4d_page_vaddr(*(p4dp))) + pud_index(addr))
 #define pmd_offset(pudp,addr) \
 	(((pmd_t *) pud_page_vaddr(*(pudp))) + pmd_index(addr))
 #define pte_offset_kernel(dir,addr) \
@@ -1168,10 +1174,6 @@ static inline int pmd_large(pmd_t pmd)
 	return !!(pmd_raw(pmd) & cpu_to_be64(_PAGE_PTE));
 }
 
-static inline pmd_t pmd_mknotpresent(pmd_t pmd)
-{
-	return __pmd(pmd_val(pmd) & ~_PAGE_PRESENT);
-}
 /*
  * For radix we should always find H_PAGE_HASHPTE zero. Hence
  * the below will work for radix too
@@ -1370,11 +1372,11 @@ static inline bool pud_is_leaf(pud_t pud)
 	return !!(pud_raw(pud) & cpu_to_be64(_PAGE_PTE));
 }
 
-#define pgd_is_leaf pgd_is_leaf
-#define pgd_leaf pgd_is_leaf
-static inline bool pgd_is_leaf(pgd_t pgd)
+#define p4d_is_leaf p4d_is_leaf
+#define p4d_leaf p4d_is_leaf
+static inline bool p4d_is_leaf(p4d_t p4d)
 {
-	return !!(pgd_raw(pgd) & cpu_to_be64(_PAGE_PTE));
+	return !!(p4d_raw(p4d) & cpu_to_be64(_PAGE_PTE));
 }
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h
index 08c222d5b764..0cba794c4fb8 100644
--- a/arch/powerpc/include/asm/book3s/64/radix.h
+++ b/arch/powerpc/include/asm/book3s/64/radix.h
@@ -30,7 +30,7 @@
 /* Don't have anything in the reserved bits and leaf bits */
 #define RADIX_PMD_BAD_BITS		0x60000000000000e0UL
 #define RADIX_PUD_BAD_BITS		0x60000000000000e0UL
-#define RADIX_PGD_BAD_BITS		0x60000000000000e0UL
+#define RADIX_P4D_BAD_BITS		0x60000000000000e0UL
 
 #define RADIX_PMD_SHIFT		(PAGE_SHIFT + RADIX_PTE_INDEX_SIZE)
 #define RADIX_PUD_SHIFT		(RADIX_PMD_SHIFT + RADIX_PMD_INDEX_SIZE)
@@ -227,9 +227,9 @@ static inline int radix__pud_bad(pud_t pud)
 }
 
 
-static inline int radix__pgd_bad(pgd_t pgd)
+static inline int radix__p4d_bad(p4d_t p4d)
 {
-	return !!(pgd_val(pgd) & RADIX_PGD_BAD_BITS);
+	return !!(p4d_val(p4d) & RADIX_P4D_BAD_BITS);
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
diff --git a/arch/powerpc/include/asm/icswx.h b/arch/powerpc/include/asm/icswx.h
index 9872f85d356f..965b1f39b2a5 100644
--- a/arch/powerpc/include/asm/icswx.h
+++ b/arch/powerpc/include/asm/icswx.h
@@ -108,6 +108,17 @@ struct data_descriptor_entry {
 	__be64 address;
 } __packed __aligned(DDE_ALIGN);
 
+/* 4.3.2 NX-stamped Fault CRB */
+
+#define NX_STAMP_ALIGN          (0x10)
+
+struct nx_fault_stamp {
+	__be64 fault_storage_addr;
+	__be16 reserved;
+	__u8   flags;
+	__u8   fault_status;
+	__be32 pswid;
+} __packed __aligned(NX_STAMP_ALIGN);
 
 /* Chapter 6.5.2 Coprocessor-Request Block (CRB) */
 
@@ -135,10 +146,15 @@ struct coprocessor_request_block {
 
 	struct coprocessor_completion_block ccb;
 
-	u8 reserved[48];
+	union {
+		struct nx_fault_stamp nx;
+		u8 reserved[16];
+	} stamp;
+
+	u8 reserved[32];
 
 	struct coprocessor_status_block csb;
-} __packed __aligned(CRB_ALIGN);
+} __packed;
 
 
 /* RFC02167 Initiate Coprocessor Instructions document
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 635969b5b58e..13f90dd03450 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -699,10 +699,6 @@ static inline void iosync(void)
  *
  * * iounmap undoes such a mapping and can be hooked
  *
- * * __ioremap_at (and the pending __iounmap_at) are low level functions to
- *   create hand-made mappings for use only by the PCI code and cannot
- *   currently be hooked. Must be page aligned.
- *
  * * __ioremap_caller is the same as above but takes an explicit caller
  *   reference rather than using __builtin_return_address(0)
  *
@@ -719,6 +715,8 @@ void __iomem *ioremap_coherent(phys_addr_t address, unsigned long size);
 
 extern void iounmap(volatile void __iomem *addr);
 
+void __iomem *ioremap_phb(phys_addr_t paddr, unsigned long size);
+
 int early_ioremap_range(unsigned long ea, phys_addr_t pa,
 			unsigned long size, pgprot_t prot);
 void __iomem *do_ioremap(phys_addr_t pa, phys_addr_t offset, unsigned long size,
@@ -727,10 +725,6 @@ void __iomem *do_ioremap(phys_addr_t pa, phys_addr_t offset, unsigned long size,
 extern void __iomem *__ioremap_caller(phys_addr_t, unsigned long size,
 				      pgprot_t prot, void *caller);
 
-extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
-				   unsigned long size, pgprot_t prot);
-extern void __iounmap_at(void *ea, unsigned long size);
-
 /*
  * When CONFIG_PPC_INDIRECT_PIO is set, we use the generic iomap implementation
  * which needs some additional definitions here. They basically allow PIO
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 360367c579de..1a474f6b1992 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -185,11 +185,41 @@ static inline void mm_context_remove_copro(struct mm_struct *mm)
 			dec_mm_active_cpus(mm);
 	}
 }
+
+/*
+ * vas_windows counter shows number of open windows in the mm
+ * context. During context switch, use this counter to clear the
+ * foreign real address mapping (CP_ABORT) for the thread / process
+ * that intend to use COPY/PASTE. When a process closes all windows,
+ * disable CP_ABORT which is expensive to run.
+ *
+ * For user context, register a copro so that TLBIs are seen by the
+ * nest MMU. mm_context_add/remove_vas_window() are used only for user
+ * space windows.
+ */
+static inline void mm_context_add_vas_window(struct mm_struct *mm)
+{
+	atomic_inc(&mm->context.vas_windows);
+	mm_context_add_copro(mm);
+}
+
+static inline void mm_context_remove_vas_window(struct mm_struct *mm)
+{
+	int v;
+
+	mm_context_remove_copro(mm);
+	v = atomic_dec_if_positive(&mm->context.vas_windows);
+
+	/* Detect imbalance between add and remove */
+	WARN_ON(v < 0);
+}
 #else
 static inline void inc_mm_active_cpus(struct mm_struct *mm) { }
 static inline void dec_mm_active_cpus(struct mm_struct *mm) { }
 static inline void mm_context_add_copro(struct mm_struct *mm) { }
 static inline void mm_context_remove_copro(struct mm_struct *mm) { }
+static inline void mm_context_add_vas_windows(struct mm_struct *mm) { }
+static inline void mm_context_remove_vas_windows(struct mm_struct *mm) { }
 #endif
 
 
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index b04ba257fddb..3d0bc99dd520 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -2,7 +2,6 @@
 #ifndef _ASM_POWERPC_NOHASH_32_PGTABLE_H
 #define _ASM_POWERPC_NOHASH_32_PGTABLE_H
 
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
 #ifndef __ASSEMBLY__
diff --git a/arch/powerpc/include/asm/nohash/64/pgalloc.h b/arch/powerpc/include/asm/nohash/64/pgalloc.h
index b9534a793293..668aee6017e7 100644
--- a/arch/powerpc/include/asm/nohash/64/pgalloc.h
+++ b/arch/powerpc/include/asm/nohash/64/pgalloc.h
@@ -15,7 +15,7 @@ struct vmemmap_backing {
 };
 extern struct vmemmap_backing *vmemmap_list;
 
-#define pgd_populate(MM, PGD, PUD)	pgd_set(PGD, (unsigned long)PUD)
+#define p4d_populate(MM, P4D, PUD)	p4d_set(P4D, (unsigned long)PUD)
 
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable-4k.h b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
index c40ec32b8194..81b1c54e3cf1 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H
 #define _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H
 
-#include <asm-generic/5level-fixup.h>
+#include <asm-generic/pgtable-nop4d.h>
 
 /*
  * Entries per page directory level.  The PTE level must use a 64b record
@@ -45,41 +45,41 @@
 #define PMD_MASKED_BITS		0
 /* Bits to mask out from a PUD to get to the PMD page */
 #define PUD_MASKED_BITS		0
-/* Bits to mask out from a PGD to get to the PUD page */
-#define PGD_MASKED_BITS		0
+/* Bits to mask out from a P4D to get to the PUD page */
+#define P4D_MASKED_BITS		0
 
 
 /*
  * 4-level page tables related bits
  */
 
-#define pgd_none(pgd)		(!pgd_val(pgd))
-#define pgd_bad(pgd)		(pgd_val(pgd) == 0)
-#define pgd_present(pgd)	(pgd_val(pgd) != 0)
-#define pgd_page_vaddr(pgd)	(pgd_val(pgd) & ~PGD_MASKED_BITS)
+#define p4d_none(p4d)		(!p4d_val(p4d))
+#define p4d_bad(p4d)		(p4d_val(p4d) == 0)
+#define p4d_present(p4d)	(p4d_val(p4d) != 0)
+#define p4d_page_vaddr(p4d)	(p4d_val(p4d) & ~P4D_MASKED_BITS)
 
 #ifndef __ASSEMBLY__
 
-static inline void pgd_clear(pgd_t *pgdp)
+static inline void p4d_clear(p4d_t *p4dp)
 {
-	*pgdp = __pgd(0);
+	*p4dp = __p4d(0);
 }
 
-static inline pte_t pgd_pte(pgd_t pgd)
+static inline pte_t p4d_pte(p4d_t p4d)
 {
-	return __pte(pgd_val(pgd));
+	return __pte(p4d_val(p4d));
 }
 
-static inline pgd_t pte_pgd(pte_t pte)
+static inline p4d_t pte_p4d(pte_t pte)
 {
-	return __pgd(pte_val(pte));
+	return __p4d(pte_val(pte));
 }
-extern struct page *pgd_page(pgd_t pgd);
+extern struct page *p4d_page(p4d_t p4d);
 
 #endif /* !__ASSEMBLY__ */
 
-#define pud_offset(pgdp, addr)	\
-  (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
+#define pud_offset(p4dp, addr)	\
+  (((pud_t *) p4d_page_vaddr(*(p4dp))) + \
     (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
 
 #define pud_ERROR(e) \
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index 9a33b8bd842d..b360f262b9c6 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -175,11 +175,11 @@ static inline pud_t pte_pud(pte_t pte)
 	return __pud(pte_val(pte));
 }
 #define pud_write(pud)		pte_write(pud_pte(pud))
-#define pgd_write(pgd)		pte_write(pgd_pte(pgd))
+#define p4d_write(pgd)		pte_write(p4d_pte(p4d))
 
-static inline void pgd_set(pgd_t *pgdp, unsigned long val)
+static inline void p4d_set(p4d_t *p4dp, unsigned long val)
 {
-	*pgdp = __pgd(val);
+	*p4dp = __p4d(val);
 }
 
 /*
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 69f4cb3b7c56..b92e81b256e5 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -66,7 +66,7 @@ struct pci_controller {
 
 	void __iomem *io_base_virt;
 #ifdef CONFIG_PPC64
-	void *io_base_alloc;
+	void __iomem *io_base_alloc;
 #endif
 	resource_size_t io_base_phys;
 	resource_size_t pci_io_size;
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index b1f1d5339735..bad9b324559d 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -44,12 +44,12 @@ struct mm_struct;
 #ifdef CONFIG_PPC32
 static inline pmd_t *pmd_ptr(struct mm_struct *mm, unsigned long va)
 {
-	return pmd_offset(pud_offset(pgd_offset(mm, va), va), va);
+	return pmd_offset(pud_offset(p4d_offset(pgd_offset(mm, va), va), va), va);
 }
 
 static inline pmd_t *pmd_ptr_k(unsigned long va)
 {
-	return pmd_offset(pud_offset(pgd_offset_k(va), va), va);
+	return pmd_offset(pud_offset(p4d_offset(pgd_offset_k(va), va), va), va);
 }
 
 static inline pte_t *virt_to_kpte(unsigned long vaddr)
@@ -158,9 +158,9 @@ static inline bool pud_is_leaf(pud_t pud)
 }
 #endif
 
-#ifndef pgd_is_leaf
-#define pgd_is_leaf pgd_is_leaf
-static inline bool pgd_is_leaf(pgd_t pgd)
+#ifndef p4d_is_leaf
+#define p4d_is_leaf p4d_is_leaf
+static inline bool p4d_is_leaf(p4d_t p4d)
 {
 	return false;
 }
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index eedcbfb9a6ff..bfa336fbcfeb 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -272,7 +272,6 @@ struct thread_struct {
 	unsigned 	mmcr0;
 
 	unsigned 	used_ebb;
-	unsigned int	used_vas;
 #endif
 };
 
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index b867b58b1093..fdab93428372 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -102,8 +102,6 @@ static inline void clear_task_ebb(struct task_struct *t)
 #endif
 }
 
-extern int set_thread_uses_vas(void);
-
 extern int set_thread_tidr(struct task_struct *t);
 
 #endif /* _ASM_POWERPC_SWITCH_TO_H */
diff --git a/arch/powerpc/include/asm/vas.h b/arch/powerpc/include/asm/vas.h
index f93e6b0f5c84..e33f80b0ea81 100644
--- a/arch/powerpc/include/asm/vas.h
+++ b/arch/powerpc/include/asm/vas.h
@@ -86,7 +86,6 @@ struct vas_tx_win_attr {
 	int wcreds_max;
 	int lpid;
 	int pidr;		/* hardware PID (from SPRN_PID) */
-	int pid;		/* linux process id */
 	int pswid;
 	int rsvd_txbuf_count;
 	int tc_mode;
@@ -163,4 +162,16 @@ int vas_copy_crb(void *crb, int offset);
  */
 int vas_paste_crb(struct vas_window *win, int offset, bool re);
 
+/*
+ * Register / unregister coprocessor type to VAS API which will be exported
+ * to user space. Applications can use this API to open / close window
+ * which can be used to send / receive requests directly to cooprcessor.
+ *
+ * Only NX GZIP coprocessor type is supported now, but this API can be
+ * used for others in future.
+ */
+int vas_register_coproc_api(struct module *mod, enum vas_cop_type cop_type,
+				const char *name);
+void vas_unregister_coproc_api(void);
+
 #endif /* __ASM_POWERPC_VAS_H */
diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
index 93f982dbb3d4..d08ea11b271c 100644
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -5,6 +5,8 @@
 #ifndef _ASM_POWERPC_XIVE_H
 #define _ASM_POWERPC_XIVE_H
 
+#include <asm/opal-api.h>
+
 #define XIVE_INVALID_VP	0xffffffff
 
 #ifdef CONFIG_PPC_XIVE
@@ -108,7 +110,6 @@ void xive_native_free_vp_block(u32 vp_base);
 int xive_native_populate_irq_data(u32 hw_irq,
 				  struct xive_irq_data *data);
 void xive_cleanup_irq_data(struct xive_irq_data *xd);
-u32 xive_native_alloc_irq(void);
 void xive_native_free_irq(u32 irq);
 int xive_native_configure_irq(u32 hw_irq, u32 target, u8 prio, u32 sw_irq);
 
@@ -137,6 +138,12 @@ int xive_native_set_queue_state(u32 vp_id, uint32_t prio, u32 qtoggle,
 				u32 qindex);
 int xive_native_get_vp_state(u32 vp_id, u64 *out_state);
 bool xive_native_has_queue_state_support(void);
+extern u32 xive_native_alloc_irq_on_chip(u32 chip_id);
+
+static inline u32 xive_native_alloc_irq(void)
+{
+	return xive_native_alloc_irq_on_chip(OPAL_XIVE_ANY_CHIP);
+}
 
 #else
 
diff --git a/arch/powerpc/include/uapi/asm/kvm_para.h b/arch/powerpc/include/uapi/asm/kvm_para.h
index be48c2215fa2..a809b1b44ddf 100644
--- a/arch/powerpc/include/uapi/asm/kvm_para.h
+++ b/arch/powerpc/include/uapi/asm/kvm_para.h
@@ -31,7 +31,7 @@
  * Struct fields are always 32 or 64 bit aligned, depending on them being 32
  * or 64 bit wide respectively.
  *
- * See Documentation/virt/kvm/ppc-pv.txt
+ * See Documentation/virt/kvm/ppc-pv.rst
  */
 struct kvm_vcpu_arch_shared {
 	__u64 scratch1;
diff --git a/arch/powerpc/include/uapi/asm/vas-api.h b/arch/powerpc/include/uapi/asm/vas-api.h
new file mode 100644
index 000000000000..ebd4b2424785
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/vas-api.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright 2019 IBM Corp.
+ */
+
+#ifndef _UAPI_MISC_VAS_H
+#define _UAPI_MISC_VAS_H
+
+#include <linux/types.h>
+
+#include <asm/ioctl.h>
+
+#define VAS_MAGIC	'v'
+#define VAS_TX_WIN_OPEN	_IOW(VAS_MAGIC, 0x20, struct vas_tx_win_open_attr)
+
+struct vas_tx_win_open_attr {
+	__u32	version;
+	__s16	vas_id;	/* specific instance of vas or -1 for default */
+	__u16	reserved1;
+	__u64	flags;	/* Future use */
+	__u64	reserved2[6];
+};
+
+#endif /* _UAPI_MISC_VAS_H */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 1f1169856dc8..112d150354b2 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -748,9 +748,8 @@ void do_IRQ(struct pt_regs *regs)
 
 static void *__init alloc_vm_stack(void)
 {
-	return __vmalloc_node_range(THREAD_SIZE, THREAD_ALIGN, VMALLOC_START,
-				    VMALLOC_END, THREADINFO_GFP, PAGE_KERNEL,
-				     0, NUMA_NO_NODE, (void*)_RET_IP_);
+	return __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, THREADINFO_GFP,
+			      NUMA_NO_NODE, (void *)_RET_IP_);
 }
 
 static void __init vmap_irqstack_init(void)
diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c
index 773671b512df..2257d24e6a26 100644
--- a/arch/powerpc/kernel/isa-bridge.c
+++ b/arch/powerpc/kernel/isa-bridge.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/notifier.h>
+#include <linux/vmalloc.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -38,6 +39,22 @@ EXPORT_SYMBOL_GPL(isa_bridge_pcidev);
 #define ISA_SPACE_MASK 0x1
 #define ISA_SPACE_IO 0x1
 
+static void remap_isa_base(phys_addr_t pa, unsigned long size)
+{
+	WARN_ON_ONCE(ISA_IO_BASE & ~PAGE_MASK);
+	WARN_ON_ONCE(pa & ~PAGE_MASK);
+	WARN_ON_ONCE(size & ~PAGE_MASK);
+
+	if (slab_is_available()) {
+		if (ioremap_page_range(ISA_IO_BASE, ISA_IO_BASE + size, pa,
+				pgprot_noncached(PAGE_KERNEL)))
+			unmap_kernel_range(ISA_IO_BASE, size);
+	} else {
+		early_ioremap_range(ISA_IO_BASE, pa, size,
+				pgprot_noncached(PAGE_KERNEL));
+	}
+}
+
 static void pci_process_ISA_OF_ranges(struct device_node *isa_node,
 				      unsigned long phb_io_base_phys)
 {
@@ -105,15 +122,13 @@ static void pci_process_ISA_OF_ranges(struct device_node *isa_node,
 	if (size > 0x10000)
 		size = 0x10000;
 
-	__ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE,
-		     size, pgprot_noncached(PAGE_KERNEL));
+	remap_isa_base(phb_io_base_phys, size);
 	return;
 
 inval_range:
 	printk(KERN_ERR "no ISA IO ranges or unexpected isa range, "
 	       "mapping 64k\n");
-	__ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE,
-		     0x10000, pgprot_noncached(PAGE_KERNEL));
+	remap_isa_base(phb_io_base_phys, 0x10000);
 }
 
 
@@ -248,8 +263,7 @@ void __init isa_bridge_init_non_pci(struct device_node *np)
 	 * and map it
 	 */
 	isa_io_base = ISA_IO_BASE;
-	__ioremap_at(pbase, (void *)ISA_IO_BASE,
-		     size, pgprot_noncached(PAGE_KERNEL));
+	remap_isa_base(pbase, size);
 
 	pr_debug("ISA: Non-PCI bridge is %pOF\n", np);
 }
@@ -297,7 +311,7 @@ static void isa_bridge_remove(void)
 	isa_bridge_pcidev = NULL;
 
 	/* Unmap the ISA area */
-	__iounmap_at((void *)ISA_IO_BASE, 0x10000);
+	unmap_kernel_range(ISA_IO_BASE, 0x10000);
 }
 
 /**
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index f83d1f69b1dd..d9ac980c398c 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -109,23 +109,47 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
 	/* Get the host bridge */
 	hose = pci_bus_to_host(bus);
 
-	/* Check if we have IOs allocated */
-	if (hose->io_base_alloc == NULL)
-		return 0;
-
 	pr_debug("IO unmapping for PHB %pOF\n", hose->dn);
 	pr_debug("  alloc=0x%p\n", hose->io_base_alloc);
 
-	/* This is a PHB, we fully unmap the IO area */
-	vunmap(hose->io_base_alloc);
-
+	iounmap(hose->io_base_alloc);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pcibios_unmap_io_space);
 
-static int pcibios_map_phb_io_space(struct pci_controller *hose)
+void __iomem *ioremap_phb(phys_addr_t paddr, unsigned long size)
 {
 	struct vm_struct *area;
+	unsigned long addr;
+
+	WARN_ON_ONCE(paddr & ~PAGE_MASK);
+	WARN_ON_ONCE(size & ~PAGE_MASK);
+
+	/*
+	 * Let's allocate some IO space for that guy. We don't pass VM_IOREMAP
+	 * because we don't care about alignment tricks that the core does in
+	 * that case.  Maybe we should due to stupid card with incomplete
+	 * address decoding but I'd rather not deal with those outside of the
+	 * reserved 64K legacy region.
+	 */
+	area = __get_vm_area_caller(size, 0, PHB_IO_BASE, PHB_IO_END,
+				    __builtin_return_address(0));
+	if (!area)
+		return NULL;
+
+	addr = (unsigned long)area->addr;
+	if (ioremap_page_range(addr, addr + size, paddr,
+			pgprot_noncached(PAGE_KERNEL))) {
+		unmap_kernel_range(addr, size);
+		return NULL;
+	}
+
+	return (void __iomem *)addr;
+}
+EXPORT_SYMBOL_GPL(ioremap_phb);
+
+static int pcibios_map_phb_io_space(struct pci_controller *hose)
+{
 	unsigned long phys_page;
 	unsigned long size_page;
 	unsigned long io_virt_offset;
@@ -146,12 +170,11 @@ static int pcibios_map_phb_io_space(struct pci_controller *hose)
 	 * with incomplete address decoding but I'd rather not deal with
 	 * those outside of the reserved 64K legacy region.
 	 */
-	area = __get_vm_area(size_page, 0, PHB_IO_BASE, PHB_IO_END);
-	if (area == NULL)
+	hose->io_base_alloc = ioremap_phb(phys_page, size_page);
+	if (!hose->io_base_alloc)
 		return -ENOMEM;
-	hose->io_base_alloc = area->addr;
-	hose->io_base_virt = (void __iomem *)(area->addr +
-					      hose->io_base_phys - phys_page);
+	hose->io_base_virt = hose->io_base_alloc +
+				hose->io_base_phys - phys_page;
 
 	pr_debug("IO mapping for PHB %pOF\n", hose->dn);
 	pr_debug("  phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
@@ -159,11 +182,6 @@ static int pcibios_map_phb_io_space(struct pci_controller *hose)
 	pr_debug("  size=0x%016llx (alloc=0x%016lx)\n",
 		 hose->pci_io_size, size_page);
 
-	/* Establish the mapping */
-	if (__ioremap_at(phys_page, area->addr, size_page,
-			 pgprot_noncached(PAGE_KERNEL)) == NULL)
-		return -ENOMEM;
-
 	/* Fixup hose IO resource */
 	io_virt_offset = pcibios_io_space_offset(hose);
 	hose->io_resource.start += io_virt_offset;
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9c21288f8645..60ff743b2fcf 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1228,7 +1228,8 @@ struct task_struct *__switch_to(struct task_struct *prev,
 		 * mappings, we must issue a cp_abort to clear any state and
 		 * prevent snooping, corruption or a covert channel.
 		 */
-		if (current->thread.used_vas)
+		if (current->mm &&
+			atomic_read(&current->mm->context.vas_windows))
 			asm volatile(PPC_CP_ABORT);
 	}
 #endif /* CONFIG_PPC_BOOK3S_64 */
@@ -1444,7 +1445,7 @@ void show_regs(struct pt_regs * regs)
 	printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip);
 	printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link);
 #endif
-	show_stack(current, (unsigned long *) regs->gpr[1]);
+	show_stack(current, (unsigned long *) regs->gpr[1], KERN_DEFAULT);
 	if (!user_mode(regs))
 		show_instructions(regs);
 }
@@ -1467,27 +1468,6 @@ void arch_setup_new_exec(void)
 }
 #endif
 
-int set_thread_uses_vas(void)
-{
-#ifdef CONFIG_PPC_BOOK3S_64
-	if (!cpu_has_feature(CPU_FTR_ARCH_300))
-		return -EINVAL;
-
-	current->thread.used_vas = 1;
-
-	/*
-	 * Even a process that has no foreign real address mapping can use
-	 * an unpaired COPY instruction (to no real effect). Issue CP_ABORT
-	 * to clear any pending COPY and prevent a covert channel.
-	 *
-	 * __switch_to() will issue CP_ABORT on future context switches.
-	 */
-	asm volatile(PPC_CP_ABORT);
-
-#endif /* CONFIG_PPC_BOOK3S_64 */
-	return 0;
-}
-
 #ifdef CONFIG_PPC64
 /**
  * Assign a TIDR (thread ID) for task @t and set it in the thread
@@ -2068,7 +2048,8 @@ unsigned long get_wchan(struct task_struct *p)
 
 static int kstack_depth_to_print = CONFIG_PRINT_STACK_DEPTH;
 
-void show_stack(struct task_struct *tsk, unsigned long *stack)
+void show_stack(struct task_struct *tsk, unsigned long *stack,
+		const char *loglvl)
 {
 	unsigned long sp, ip, lr, newsp;
 	int count = 0;
@@ -2093,7 +2074,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 	}
 
 	lr = 0;
-	printk("Call Trace:\n");
+	printk("%sCall Trace:\n", loglvl);
 	do {
 		if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD))
 			break;
@@ -2102,7 +2083,8 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		newsp = stack[0];
 		ip = stack[STACK_FRAME_LR_SAVE];
 		if (!firstframe || ip != lr) {
-			printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
+			printk("%s["REG"] ["REG"] %pS",
+				loglvl, sp, ip, (void *)ip);
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 			ret_addr = ftrace_graph_ret_addr(current,
 						&ftrace_idx, ip, stack);
@@ -2124,8 +2106,9 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 			struct pt_regs *regs = (struct pt_regs *)
 				(sp + STACK_FRAME_OVERHEAD);
 			lr = regs->link;
-			printk("--- interrupt: %lx at %pS\n    LR = %pS\n",
-			       regs->trap, (void *)regs->nip, (void *)lr);
+			printk("%s--- interrupt: %lx at %pS\n    LR = %pS\n",
+			       loglvl, regs->trap,
+			       (void *)regs->nip, (void *)lr);
 			firstframe = 1;
 		}
 
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index c477b8585a29..b6440657ef92 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -260,7 +260,7 @@ static void raise_backtrace_ipi(cpumask_t *mask)
 			pr_cont(" current pointer corrupt? (%px)\n", p->__current);
 
 		pr_warn("Back trace of paca->saved_r1 (0x%016llx) (possibly stale):\n", p->saved_r1);
-		show_stack(p->__current, (unsigned long *)p->saved_r1);
+		show_stack(p->__current, (unsigned long *)p->saved_r1, KERN_WARNING);
 	}
 }
 
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index 220ae11555f2..03b8bc7707db 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -527,3 +527,4 @@
 435	spu	clone3				sys_ni_syscall
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
+439	common	process_madvise			sys_process_madvise		compat_sys_process_madvise
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 5690a1f9b976..37508a356f28 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -36,41 +36,38 @@
 #include "book3s.h"
 #include "trace.h"
 
-#define VM_STAT(x, ...) offsetof(struct kvm, stat.x), KVM_STAT_VM, ## __VA_ARGS__
-#define VCPU_STAT(x, ...) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU, ## __VA_ARGS__
-
 /* #define EXIT_DEBUG */
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
-	{ "exits",       VCPU_STAT(sum_exits) },
-	{ "mmio",        VCPU_STAT(mmio_exits) },
-	{ "sig",         VCPU_STAT(signal_exits) },
-	{ "sysc",        VCPU_STAT(syscall_exits) },
-	{ "inst_emu",    VCPU_STAT(emulated_inst_exits) },
-	{ "dec",         VCPU_STAT(dec_exits) },
-	{ "ext_intr",    VCPU_STAT(ext_intr_exits) },
-	{ "queue_intr",  VCPU_STAT(queue_intr) },
-	{ "halt_poll_success_ns",	VCPU_STAT(halt_poll_success_ns) },
-	{ "halt_poll_fail_ns",		VCPU_STAT(halt_poll_fail_ns) },
-	{ "halt_wait_ns",		VCPU_STAT(halt_wait_ns) },
-	{ "halt_successful_poll", VCPU_STAT(halt_successful_poll), },
-	{ "halt_attempted_poll", VCPU_STAT(halt_attempted_poll), },
-	{ "halt_successful_wait",	VCPU_STAT(halt_successful_wait) },
-	{ "halt_poll_invalid", VCPU_STAT(halt_poll_invalid) },
-	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
-	{ "pf_storage",  VCPU_STAT(pf_storage) },
-	{ "sp_storage",  VCPU_STAT(sp_storage) },
-	{ "pf_instruc",  VCPU_STAT(pf_instruc) },
-	{ "sp_instruc",  VCPU_STAT(sp_instruc) },
-	{ "ld",          VCPU_STAT(ld) },
-	{ "ld_slow",     VCPU_STAT(ld_slow) },
-	{ "st",          VCPU_STAT(st) },
-	{ "st_slow",     VCPU_STAT(st_slow) },
-	{ "pthru_all",       VCPU_STAT(pthru_all) },
-	{ "pthru_host",      VCPU_STAT(pthru_host) },
-	{ "pthru_bad_aff",   VCPU_STAT(pthru_bad_aff) },
-	{ "largepages_2M",    VM_STAT(num_2M_pages, .mode = 0444) },
-	{ "largepages_1G",    VM_STAT(num_1G_pages, .mode = 0444) },
+	VCPU_STAT("exits", sum_exits),
+	VCPU_STAT("mmio", mmio_exits),
+	VCPU_STAT("sig", signal_exits),
+	VCPU_STAT("sysc", syscall_exits),
+	VCPU_STAT("inst_emu", emulated_inst_exits),
+	VCPU_STAT("dec", dec_exits),
+	VCPU_STAT("ext_intr", ext_intr_exits),
+	VCPU_STAT("queue_intr", queue_intr),
+	VCPU_STAT("halt_poll_success_ns", halt_poll_success_ns),
+	VCPU_STAT("halt_poll_fail_ns", halt_poll_fail_ns),
+	VCPU_STAT("halt_wait_ns", halt_wait_ns),
+	VCPU_STAT("halt_successful_poll", halt_successful_poll),
+	VCPU_STAT("halt_attempted_poll", halt_attempted_poll),
+	VCPU_STAT("halt_successful_wait", halt_successful_wait),
+	VCPU_STAT("halt_poll_invalid", halt_poll_invalid),
+	VCPU_STAT("halt_wakeup", halt_wakeup),
+	VCPU_STAT("pf_storage", pf_storage),
+	VCPU_STAT("sp_storage", sp_storage),
+	VCPU_STAT("pf_instruc", pf_instruc),
+	VCPU_STAT("sp_instruc", sp_instruc),
+	VCPU_STAT("ld", ld),
+	VCPU_STAT("ld_slow", ld_slow),
+	VCPU_STAT("st", st),
+	VCPU_STAT("st_slow", st_slow),
+	VCPU_STAT("pthru_all", pthru_all),
+	VCPU_STAT("pthru_host", pthru_host),
+	VCPU_STAT("pthru_bad_aff", pthru_bad_aff),
+	VM_STAT("largepages_2M", num_2M_pages, .mode = 0444),
+	VM_STAT("largepages_1G", num_1G_pages, .mode = 0444),
 	{ NULL }
 };
 
diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c
index aa12cd4078b3..d605ed0bb2e7 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c
@@ -499,13 +499,14 @@ void kvmppc_free_pgtable_radix(struct kvm *kvm, pgd_t *pgd, unsigned int lpid)
 	unsigned long ig;
 
 	for (ig = 0; ig < PTRS_PER_PGD; ++ig, ++pgd) {
+		p4d_t *p4d = p4d_offset(pgd, 0);
 		pud_t *pud;
 
-		if (!pgd_present(*pgd))
+		if (!p4d_present(*p4d))
 			continue;
-		pud = pud_offset(pgd, 0);
+		pud = pud_offset(p4d, 0);
 		kvmppc_unmap_free_pud(kvm, pud, lpid);
-		pgd_clear(pgd);
+		p4d_clear(p4d);
 	}
 }
 
@@ -566,6 +567,7 @@ int kvmppc_create_pte(struct kvm *kvm, pgd_t *pgtable, pte_t pte,
 		      unsigned long *rmapp, struct rmap_nested **n_rmap)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud, *new_pud = NULL;
 	pmd_t *pmd, *new_pmd = NULL;
 	pte_t *ptep, *new_ptep = NULL;
@@ -573,9 +575,11 @@ int kvmppc_create_pte(struct kvm *kvm, pgd_t *pgtable, pte_t pte,
 
 	/* Traverse the guest's 2nd-level tree, allocate new levels needed */
 	pgd = pgtable + pgd_index(gpa);
+	p4d = p4d_offset(pgd, gpa);
+
 	pud = NULL;
-	if (pgd_present(*pgd))
-		pud = pud_offset(pgd, gpa);
+	if (p4d_present(*p4d))
+		pud = pud_offset(p4d, gpa);
 	else
 		new_pud = pud_alloc_one(kvm->mm, gpa);
 
@@ -596,13 +600,13 @@ int kvmppc_create_pte(struct kvm *kvm, pgd_t *pgtable, pte_t pte,
 
 	/* Now traverse again under the lock and change the tree */
 	ret = -ENOMEM;
-	if (pgd_none(*pgd)) {
+	if (p4d_none(*p4d)) {
 		if (!new_pud)
 			goto out_unlock;
-		pgd_populate(kvm->mm, pgd, new_pud);
+		p4d_populate(kvm->mm, p4d, new_pud);
 		new_pud = NULL;
 	}
-	pud = pud_offset(pgd, gpa);
+	pud = pud_offset(p4d, gpa);
 	if (pud_is_leaf(*pud)) {
 		unsigned long hgpa = gpa & PUD_MASK;
 
@@ -1220,7 +1224,8 @@ static ssize_t debugfs_radix_read(struct file *file, char __user *buf,
 	unsigned long gpa;
 	pgd_t *pgt;
 	struct kvm_nested_guest *nested;
-	pgd_t pgd, *pgdp;
+	pgd_t *pgdp;
+	p4d_t p4d, *p4dp;
 	pud_t pud, *pudp;
 	pmd_t pmd, *pmdp;
 	pte_t *ptep;
@@ -1293,13 +1298,14 @@ static ssize_t debugfs_radix_read(struct file *file, char __user *buf,
 		}
 
 		pgdp = pgt + pgd_index(gpa);
-		pgd = READ_ONCE(*pgdp);
-		if (!(pgd_val(pgd) & _PAGE_PRESENT)) {
-			gpa = (gpa & PGDIR_MASK) + PGDIR_SIZE;
+		p4dp = p4d_offset(pgdp, gpa);
+		p4d = READ_ONCE(*p4dp);
+		if (!(p4d_val(p4d) & _PAGE_PRESENT)) {
+			gpa = (gpa & P4D_MASK) + P4D_SIZE;
 			continue;
 		}
 
-		pudp = pud_offset(&pgd, gpa);
+		pudp = pud_offset(&p4d, gpa);
 		pud = READ_ONCE(*pudp);
 		if (!(pud_val(pud) & _PAGE_PRESENT)) {
 			gpa = (gpa & PUD_MASK) + PUD_SIZE;
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 6c18ea88fd25..c2984cb6dfa7 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -35,29 +35,26 @@
 
 unsigned long kvmppc_booke_handlers;
 
-#define VM_STAT(x) offsetof(struct kvm, stat.x), KVM_STAT_VM
-#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
-
 struct kvm_stats_debugfs_item debugfs_entries[] = {
-	{ "mmio",       VCPU_STAT(mmio_exits) },
-	{ "sig",        VCPU_STAT(signal_exits) },
-	{ "itlb_r",     VCPU_STAT(itlb_real_miss_exits) },
-	{ "itlb_v",     VCPU_STAT(itlb_virt_miss_exits) },
-	{ "dtlb_r",     VCPU_STAT(dtlb_real_miss_exits) },
-	{ "dtlb_v",     VCPU_STAT(dtlb_virt_miss_exits) },
-	{ "sysc",       VCPU_STAT(syscall_exits) },
-	{ "isi",        VCPU_STAT(isi_exits) },
-	{ "dsi",        VCPU_STAT(dsi_exits) },
-	{ "inst_emu",   VCPU_STAT(emulated_inst_exits) },
-	{ "dec",        VCPU_STAT(dec_exits) },
-	{ "ext_intr",   VCPU_STAT(ext_intr_exits) },
-	{ "halt_successful_poll", VCPU_STAT(halt_successful_poll) },
-	{ "halt_attempted_poll", VCPU_STAT(halt_attempted_poll) },
-	{ "halt_poll_invalid", VCPU_STAT(halt_poll_invalid) },
-	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
-	{ "doorbell", VCPU_STAT(dbell_exits) },
-	{ "guest doorbell", VCPU_STAT(gdbell_exits) },
-	{ "remote_tlb_flush", VM_STAT(remote_tlb_flush) },
+	VCPU_STAT("mmio", mmio_exits),
+	VCPU_STAT("sig", signal_exits),
+	VCPU_STAT("itlb_r", itlb_real_miss_exits),
+	VCPU_STAT("itlb_v", itlb_virt_miss_exits),
+	VCPU_STAT("dtlb_r", dtlb_real_miss_exits),
+	VCPU_STAT("dtlb_v", dtlb_virt_miss_exits),
+	VCPU_STAT("sysc", syscall_exits),
+	VCPU_STAT("isi", isi_exits),
+	VCPU_STAT("dsi", dsi_exits),
+	VCPU_STAT("inst_emu", emulated_inst_exits),
+	VCPU_STAT("dec", dec_exits),
+	VCPU_STAT("ext_intr", ext_intr_exits),
+	VCPU_STAT("halt_successful_poll", halt_successful_poll),
+	VCPU_STAT("halt_attempted_poll", halt_attempted_poll),
+	VCPU_STAT("halt_poll_invalid", halt_poll_invalid),
+	VCPU_STAT("halt_wakeup", halt_wakeup),
+	VCPU_STAT("doorbell", dbell_exits),
+	VCPU_STAT("guest doorbell", gdbell_exits),
+	VM_STAT("remote_tlb_flush", remote_tlb_flush),
 	{ NULL }
 };
 
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index e15166b0a16d..7e24691e138a 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -1764,8 +1764,9 @@ int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg)
 	return r;
 }
 
-int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
+int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 {
+	struct kvm_run *run = vcpu->run;
 	int r;
 
 	vcpu_load(vcpu);
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index 3345f039a876..7a59f6863cec 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -107,13 +107,18 @@ static inline int unmap_patch_area(unsigned long addr)
 	pte_t *ptep;
 	pmd_t *pmdp;
 	pud_t *pudp;
+	p4d_t *p4dp;
 	pgd_t *pgdp;
 
 	pgdp = pgd_offset_k(addr);
 	if (unlikely(!pgdp))
 		return -EINVAL;
 
-	pudp = pud_offset(pgdp, addr);
+	p4dp = p4d_offset(pgdp, addr);
+	if (unlikely(!p4dp))
+		return -EINVAL;
+
+	pudp = pud_offset(p4dp, addr);
 	if (unlikely(!pudp))
 		return -EINVAL;
 
diff --git a/arch/powerpc/mm/book3s64/hash_pgtable.c b/arch/powerpc/mm/book3s64/hash_pgtable.c
index 64733b9cb20a..9cd15937e88a 100644
--- a/arch/powerpc/mm/book3s64/hash_pgtable.c
+++ b/arch/powerpc/mm/book3s64/hash_pgtable.c
@@ -148,6 +148,7 @@ void hash__vmemmap_remove_mapping(unsigned long start,
 int hash__map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot)
 {
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
@@ -155,7 +156,8 @@ int hash__map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot)
 	BUILD_BUG_ON(TASK_SIZE_USER64 > H_PGTABLE_RANGE);
 	if (slab_is_available()) {
 		pgdp = pgd_offset_k(ea);
-		pudp = pud_alloc(&init_mm, pgdp, ea);
+		p4dp = p4d_offset(pgdp, ea);
+		pudp = pud_alloc(&init_mm, p4dp, ea);
 		if (!pudp)
 			return -ENOMEM;
 		pmdp = pmd_alloc(&init_mm, pudp, ea);
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index 8f9edf07063a..97891ca0d428 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -65,17 +65,19 @@ static int early_map_kernel_page(unsigned long ea, unsigned long pa,
 {
 	unsigned long pfn = pa >> PAGE_SHIFT;
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 
 	pgdp = pgd_offset_k(ea);
-	if (pgd_none(*pgdp)) {
+	p4dp = p4d_offset(pgdp, ea);
+	if (p4d_none(*p4dp)) {
 		pudp = early_alloc_pgtable(PUD_TABLE_SIZE, nid,
 						region_start, region_end);
-		pgd_populate(&init_mm, pgdp, pudp);
+		p4d_populate(&init_mm, p4dp, pudp);
 	}
-	pudp = pud_offset(pgdp, ea);
+	pudp = pud_offset(p4dp, ea);
 	if (map_page_size == PUD_SIZE) {
 		ptep = (pte_t *)pudp;
 		goto set_the_pte;
@@ -115,6 +117,7 @@ static int __map_kernel_page(unsigned long ea, unsigned long pa,
 {
 	unsigned long pfn = pa >> PAGE_SHIFT;
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
@@ -137,7 +140,8 @@ static int __map_kernel_page(unsigned long ea, unsigned long pa,
 	 * boot.
 	 */
 	pgdp = pgd_offset_k(ea);
-	pudp = pud_alloc(&init_mm, pgdp, ea);
+	p4dp = p4d_offset(pgdp, ea);
+	pudp = pud_alloc(&init_mm, p4dp, ea);
 	if (!pudp)
 		return -ENOMEM;
 	if (map_page_size == PUD_SIZE) {
@@ -174,6 +178,7 @@ void radix__change_memory_range(unsigned long start, unsigned long end,
 {
 	unsigned long idx;
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
@@ -186,7 +191,8 @@ void radix__change_memory_range(unsigned long start, unsigned long end,
 
 	for (idx = start; idx < end; idx += PAGE_SIZE) {
 		pgdp = pgd_offset_k(idx);
-		pudp = pud_alloc(&init_mm, pgdp, idx);
+		p4dp = p4d_offset(pgdp, idx);
+		pudp = pud_alloc(&init_mm, p4dp, idx);
 		if (!pudp)
 			continue;
 		if (pud_is_leaf(*pudp)) {
@@ -850,6 +856,7 @@ static void __meminit remove_pagetable(unsigned long start, unsigned long end)
 	unsigned long addr, next;
 	pud_t *pud_base;
 	pgd_t *pgd;
+	p4d_t *p4d;
 
 	spin_lock(&init_mm.page_table_lock);
 
@@ -857,15 +864,16 @@ static void __meminit remove_pagetable(unsigned long start, unsigned long end)
 		next = pgd_addr_end(addr, end);
 
 		pgd = pgd_offset_k(addr);
-		if (!pgd_present(*pgd))
+		p4d = p4d_offset(pgd, addr);
+		if (!p4d_present(*p4d))
 			continue;
 
-		if (pgd_is_leaf(*pgd)) {
-			split_kernel_mapping(addr, end, PGDIR_SIZE, (pte_t *)pgd);
+		if (p4d_is_leaf(*p4d)) {
+			split_kernel_mapping(addr, end, P4D_SIZE, (pte_t *)p4d);
 			continue;
 		}
 
-		pud_base = (pud_t *)pgd_page_vaddr(*pgd);
+		pud_base = (pud_t *)p4d_page_vaddr(*p4d);
 		remove_pud_table(pud_base, addr, next);
 	}
 
diff --git a/arch/powerpc/mm/book3s64/subpage_prot.c b/arch/powerpc/mm/book3s64/subpage_prot.c
index 2ef24a53f4c9..25a0c044bd93 100644
--- a/arch/powerpc/mm/book3s64/subpage_prot.c
+++ b/arch/powerpc/mm/book3s64/subpage_prot.c
@@ -54,15 +54,17 @@ static void hpte_flush_range(struct mm_struct *mm, unsigned long addr,
 			     int npages)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 	spinlock_t *ptl;
 
 	pgd = pgd_offset(mm, addr);
-	if (pgd_none(*pgd))
+	p4d = p4d_offset(pgd, addr);
+	if (p4d_none(*p4d))
 		return;
-	pud = pud_offset(pgd, addr);
+	pud = pud_offset(p4d, addr);
 	if (pud_none(*pud))
 		return;
 	pmd = pmd_offset(pud, addr);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 33b3461d91e8..7df8059471eb 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -119,6 +119,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
 	pgd_t *pg;
+	p4d_t *p4;
 	pud_t *pu;
 	pmd_t *pm;
 	hugepd_t *hpdp = NULL;
@@ -128,20 +129,21 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
 
 	addr &= ~(sz-1);
 	pg = pgd_offset(mm, addr);
+	p4 = p4d_offset(pg, addr);
 
 #ifdef CONFIG_PPC_BOOK3S_64
 	if (pshift == PGDIR_SHIFT)
 		/* 16GB huge page */
-		return (pte_t *) pg;
+		return (pte_t *) p4;
 	else if (pshift > PUD_SHIFT) {
 		/*
 		 * We need to use hugepd table
 		 */
 		ptl = &mm->page_table_lock;
-		hpdp = (hugepd_t *)pg;
+		hpdp = (hugepd_t *)p4;
 	} else {
 		pdshift = PUD_SHIFT;
-		pu = pud_alloc(mm, pg, addr);
+		pu = pud_alloc(mm, p4, addr);
 		if (!pu)
 			return NULL;
 		if (pshift == PUD_SHIFT)
@@ -166,10 +168,10 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
 #else
 	if (pshift >= PGDIR_SHIFT) {
 		ptl = &mm->page_table_lock;
-		hpdp = (hugepd_t *)pg;
+		hpdp = (hugepd_t *)p4;
 	} else {
 		pdshift = PUD_SHIFT;
-		pu = pud_alloc(mm, pg, addr);
+		pu = pud_alloc(mm, p4, addr);
 		if (!pu)
 			return NULL;
 		if (pshift >= PUD_SHIFT) {
@@ -253,7 +255,7 @@ int __init alloc_bootmem_huge_page(struct hstate *h)
 struct hugepd_freelist {
 	struct rcu_head	rcu;
 	unsigned int index;
-	void *ptes[0];
+	void *ptes[];
 };
 
 static DEFINE_PER_CPU(struct hugepd_freelist *, hugepd_freelist_cur);
@@ -390,7 +392,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 	mm_dec_nr_pmds(tlb->mm);
 }
 
-static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
+static void hugetlb_free_pud_range(struct mmu_gather *tlb, p4d_t *p4d,
 				   unsigned long addr, unsigned long end,
 				   unsigned long floor, unsigned long ceiling)
 {
@@ -400,7 +402,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 
 	start = addr;
 	do {
-		pud = pud_offset(pgd, addr);
+		pud = pud_offset(p4d, addr);
 		next = pud_addr_end(addr, end);
 		if (!is_hugepd(__hugepd(pud_val(*pud)))) {
 			if (pud_none_or_clear_bad(pud))
@@ -435,8 +437,8 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	if (end - 1 > ceiling - 1)
 		return;
 
-	pud = pud_offset(pgd, start);
-	pgd_clear(pgd);
+	pud = pud_offset(p4d, start);
+	p4d_clear(p4d);
 	pud_free_tlb(tlb, pud, start);
 	mm_dec_nr_puds(tlb->mm);
 }
@@ -449,6 +451,7 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			    unsigned long floor, unsigned long ceiling)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	unsigned long next;
 
 	/*
@@ -471,10 +474,11 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 	do {
 		next = pgd_addr_end(addr, end);
 		pgd = pgd_offset(tlb->mm, addr);
+		p4d = p4d_offset(pgd, addr);
 		if (!is_hugepd(__hugepd(pgd_val(*pgd)))) {
-			if (pgd_none_or_clear_bad(pgd))
+			if (p4d_none_or_clear_bad(p4d))
 				continue;
-			hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
+			hugetlb_free_pud_range(tlb, p4d, addr, next, floor, ceiling);
 		} else {
 			unsigned long more;
 			/*
@@ -487,7 +491,7 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			if (more > next)
 				next = more;
 
-			free_hugepd_range(tlb, (hugepd_t *)pgd, PGDIR_SHIFT,
+			free_hugepd_range(tlb, (hugepd_t *)p4d, PGDIR_SHIFT,
 					  addr, next, floor, ceiling);
 		}
 	} while (addr = next, addr != end);
@@ -558,7 +562,7 @@ unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
 	return vma_kernel_pagesize(vma);
 }
 
-static int __init add_huge_page_size(unsigned long long size)
+bool __init arch_hugetlb_valid_size(unsigned long size)
 {
 	int shift = __ffs(size);
 	int mmu_psize;
@@ -566,37 +570,27 @@ static int __init add_huge_page_size(unsigned long long size)
 	/* Check that it is a page size supported by the hardware and
 	 * that it fits within pagetable and slice limits. */
 	if (size <= PAGE_SIZE || !is_power_of_2(size))
-		return -EINVAL;
+		return false;
 
 	mmu_psize = check_and_get_huge_psize(shift);
 	if (mmu_psize < 0)
-		return -EINVAL;
+		return false;
 
 	BUG_ON(mmu_psize_defs[mmu_psize].shift != shift);
 
-	/* Return if huge page size has already been setup */
-	if (size_to_hstate(size))
-		return 0;
-
-	hugetlb_add_hstate(shift - PAGE_SHIFT);
-
-	return 0;
+	return true;
 }
 
-static int __init hugepage_setup_sz(char *str)
+static int __init add_huge_page_size(unsigned long long size)
 {
-	unsigned long long size;
-
-	size = memparse(str, &str);
+	int shift = __ffs(size);
 
-	if (add_huge_page_size(size) != 0) {
-		hugetlb_bad_size();
-		pr_err("Invalid huge page size specified(%llu)\n", size);
-	}
+	if (!arch_hugetlb_valid_size((unsigned long)size))
+		return -EINVAL;
 
-	return 1;
+	hugetlb_add_hstate(shift - PAGE_SHIFT);
+	return 0;
 }
-__setup("hugepagesz=", hugepage_setup_sz);
 
 static int __init hugetlbpage_init(void)
 {
diff --git a/arch/powerpc/mm/ioremap_64.c b/arch/powerpc/mm/ioremap_64.c
index 50a99d9684f7..ba5cbb0d66bd 100644
--- a/arch/powerpc/mm/ioremap_64.c
+++ b/arch/powerpc/mm/ioremap_64.c
@@ -4,56 +4,6 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 
-/**
- * Low level function to establish the page tables for an IO mapping
- */
-void __iomem *__ioremap_at(phys_addr_t pa, void *ea, unsigned long size, pgprot_t prot)
-{
-	int ret;
-	unsigned long va = (unsigned long)ea;
-
-	/* We don't support the 4K PFN hack with ioremap */
-	if (pgprot_val(prot) & H_PAGE_4K_PFN)
-		return NULL;
-
-	if ((ea + size) >= (void *)IOREMAP_END) {
-		pr_warn("Outside the supported range\n");
-		return NULL;
-	}
-
-	WARN_ON(pa & ~PAGE_MASK);
-	WARN_ON(((unsigned long)ea) & ~PAGE_MASK);
-	WARN_ON(size & ~PAGE_MASK);
-
-	if (slab_is_available()) {
-		ret = ioremap_page_range(va, va + size, pa, prot);
-		if (ret)
-			unmap_kernel_range(va, size);
-	} else {
-		ret = early_ioremap_range(va, pa, size, prot);
-	}
-
-	if (ret)
-		return NULL;
-
-	return (void __iomem *)ea;
-}
-EXPORT_SYMBOL(__ioremap_at);
-
-/**
- * Low level function to tear down the page tables for an IO mapping. This is
- * used for mappings that are manipulated manually, like partial unmapping of
- * PCI IOs or ISA space.
- */
-void __iounmap_at(void *ea, unsigned long size)
-{
-	WARN_ON(((unsigned long)ea) & ~PAGE_MASK);
-	WARN_ON(size & ~PAGE_MASK);
-
-	unmap_kernel_range((unsigned long)ea, size);
-}
-EXPORT_SYMBOL(__iounmap_at);
-
 void __iomem *__ioremap_caller(phys_addr_t addr, unsigned long size,
 			       pgprot_t prot, void *caller)
 {
diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c
index cbcad369fcb2..c99aa8cbaac5 100644
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -121,7 +121,7 @@ static void __init kasan_unmap_early_shadow_vmalloc(void)
 	phys_addr_t pa = __pa(kasan_early_shadow_page);
 
 	for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
-		pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
+		pmd_t *pmd = pmd_ptr_k(k_cur);
 		pte_t *ptep = pte_offset_kernel(pmd, k_cur);
 
 		if ((pte_val(*ptep) & PTE_RPN_MASK) != pa)
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 041ed7cfd341..0fcea21f26b4 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -271,7 +271,7 @@ void __init paging_init(void)
 	max_zone_pfns[ZONE_HIGHMEM] = max_pfn;
 #endif
 
-	free_area_init_nodes(max_zone_pfns);
+	free_area_init(max_zone_pfns);
 
 	mark_nonram_nosave();
 }
diff --git a/arch/powerpc/mm/nohash/book3e_pgtable.c b/arch/powerpc/mm/nohash/book3e_pgtable.c
index 4637fdd469cf..77884e24281d 100644
--- a/arch/powerpc/mm/nohash/book3e_pgtable.c
+++ b/arch/powerpc/mm/nohash/book3e_pgtable.c
@@ -73,6 +73,7 @@ static void __init *early_alloc_pgtable(unsigned long size)
 int __ref map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot)
 {
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
@@ -80,7 +81,8 @@ int __ref map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot)
 	BUILD_BUG_ON(TASK_SIZE_USER64 > PGTABLE_RANGE);
 	if (slab_is_available()) {
 		pgdp = pgd_offset_k(ea);
-		pudp = pud_alloc(&init_mm, pgdp, ea);
+		p4dp = p4d_offset(pgdp, ea);
+		pudp = pud_alloc(&init_mm, p4dp, ea);
 		if (!pudp)
 			return -ENOMEM;
 		pmdp = pmd_alloc(&init_mm, pudp, ea);
@@ -91,13 +93,12 @@ int __ref map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot)
 			return -ENOMEM;
 	} else {
 		pgdp = pgd_offset_k(ea);
-#ifndef __PAGETABLE_PUD_FOLDED
-		if (pgd_none(*pgdp)) {
-			pudp = early_alloc_pgtable(PUD_TABLE_SIZE);
-			pgd_populate(&init_mm, pgdp, pudp);
+		p4dp = p4d_offset(pgdp, ea);
+		if (p4d_none(*p4dp)) {
+			pmdp = early_alloc_pgtable(PMD_TABLE_SIZE);
+			p4d_populate(&init_mm, p4dp, pmdp);
 		}
-#endif /* !__PAGETABLE_PUD_FOLDED */
-		pudp = pud_offset(pgdp, ea);
+		pudp = pud_offset(p4dp, ea);
 		if (pud_none(*pudp)) {
 			pmdp = early_alloc_pgtable(PMD_TABLE_SIZE);
 			pud_populate(&init_mm, pudp, pmdp);
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index e3759b69f81b..c2499271f6c1 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -265,6 +265,7 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 
@@ -272,7 +273,9 @@ void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
 		return;
 	pgd = mm->pgd + pgd_index(addr);
 	BUG_ON(pgd_none(*pgd));
-	pud = pud_offset(pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	BUG_ON(p4d_none(*p4d));
+	pud = pud_offset(p4d, addr);
 	BUG_ON(pud_none(*pud));
 	pmd = pmd_offset(pud, addr);
 	/*
@@ -312,12 +315,13 @@ EXPORT_SYMBOL_GPL(vmalloc_to_phys);
 pte_t *__find_linux_pte(pgd_t *pgdir, unsigned long ea,
 			bool *is_thp, unsigned *hpage_shift)
 {
-	pgd_t pgd, *pgdp;
+	pgd_t *pgdp;
+	p4d_t p4d, *p4dp;
 	pud_t pud, *pudp;
 	pmd_t pmd, *pmdp;
 	pte_t *ret_pte;
 	hugepd_t *hpdp = NULL;
-	unsigned pdshift = PGDIR_SHIFT;
+	unsigned pdshift;
 
 	if (hpage_shift)
 		*hpage_shift = 0;
@@ -325,24 +329,28 @@ pte_t *__find_linux_pte(pgd_t *pgdir, unsigned long ea,
 	if (is_thp)
 		*is_thp = false;
 
-	pgdp = pgdir + pgd_index(ea);
-	pgd  = READ_ONCE(*pgdp);
 	/*
 	 * Always operate on the local stack value. This make sure the
 	 * value don't get updated by a parallel THP split/collapse,
 	 * page fault or a page unmap. The return pte_t * is still not
 	 * stable. So should be checked there for above conditions.
+	 * Top level is an exception because it is folded into p4d.
 	 */
-	if (pgd_none(pgd))
+	pgdp = pgdir + pgd_index(ea);
+	p4dp = p4d_offset(pgdp, ea);
+	p4d  = READ_ONCE(*p4dp);
+	pdshift = P4D_SHIFT;
+
+	if (p4d_none(p4d))
 		return NULL;
 
-	if (pgd_is_leaf(pgd)) {
-		ret_pte = (pte_t *)pgdp;
+	if (p4d_is_leaf(p4d)) {
+		ret_pte = (pte_t *)p4dp;
 		goto out;
 	}
 
-	if (is_hugepd(__hugepd(pgd_val(pgd)))) {
-		hpdp = (hugepd_t *)&pgd;
+	if (is_hugepd(__hugepd(p4d_val(p4d)))) {
+		hpdp = (hugepd_t *)&p4d;
 		goto out_huge;
 	}
 
@@ -352,7 +360,7 @@ pte_t *__find_linux_pte(pgd_t *pgdir, unsigned long ea,
 	 * irq disabled
 	 */
 	pdshift = PUD_SHIFT;
-	pudp = pud_offset(&pgd, ea);
+	pudp = pud_offset(&p4d, ea);
 	pud  = READ_ONCE(*pudp);
 
 	if (pud_none(pud))
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index e78832dce7bb..1f86a88fd4bb 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -101,13 +101,13 @@ EXPORT_SYMBOL(__pte_frag_size_shift);
 
 #ifndef __PAGETABLE_PUD_FOLDED
 /* 4 level page table */
-struct page *pgd_page(pgd_t pgd)
+struct page *p4d_page(p4d_t p4d)
 {
-	if (pgd_is_leaf(pgd)) {
-		VM_WARN_ON(!pgd_huge(pgd));
-		return pte_page(pgd_pte(pgd));
+	if (p4d_is_leaf(p4d)) {
+		VM_WARN_ON(!p4d_huge(p4d));
+		return pte_page(p4d_pte(p4d));
 	}
-	return virt_to_page(pgd_page_vaddr(pgd));
+	return virt_to_page(p4d_page_vaddr(p4d));
 }
 #endif
 
diff --git a/arch/powerpc/mm/ptdump/hashpagetable.c b/arch/powerpc/mm/ptdump/hashpagetable.c
index b6ed9578382f..6aaeb1eb3b9c 100644
--- a/arch/powerpc/mm/ptdump/hashpagetable.c
+++ b/arch/powerpc/mm/ptdump/hashpagetable.c
@@ -417,9 +417,9 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 	}
 }
 
-static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start)
+static void walk_pud(struct pg_state *st, p4d_t *p4d, unsigned long start)
 {
-	pud_t *pud = pud_offset(pgd, 0);
+	pud_t *pud = pud_offset(p4d, 0);
 	unsigned long addr;
 	unsigned int i;
 
@@ -431,6 +431,20 @@ static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start)
 	}
 }
 
+static void walk_p4d(struct pg_state *st, pgd_t *pgd, unsigned long start)
+{
+	p4d_t *p4d = p4d_offset(pgd, 0);
+	unsigned long addr;
+	unsigned int i;
+
+	for (i = 0; i < PTRS_PER_P4D; i++, p4d++) {
+		addr = start + i * P4D_SIZE;
+		if (!p4d_none(*p4d))
+			/* p4d exists */
+			walk_pud(st, p4d, addr);
+	}
+}
+
 static void walk_pagetables(struct pg_state *st)
 {
 	pgd_t *pgd = pgd_offset_k(0UL);
@@ -445,7 +459,7 @@ static void walk_pagetables(struct pg_state *st)
 		addr = KERN_VIRT_START + i * PGDIR_SIZE;
 		if (!pgd_none(*pgd))
 			/* pgd exists */
-			walk_pud(st, pgd, addr);
+			walk_p4d(st, pgd, addr);
 	}
 }
 
diff --git a/arch/powerpc/mm/ptdump/ptdump.c b/arch/powerpc/mm/ptdump/ptdump.c
index d92bb8ea229c..507cb9793b26 100644
--- a/arch/powerpc/mm/ptdump/ptdump.c
+++ b/arch/powerpc/mm/ptdump/ptdump.c
@@ -277,9 +277,9 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 	}
 }
 
-static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start)
+static void walk_pud(struct pg_state *st, p4d_t *p4d, unsigned long start)
 {
-	pud_t *pud = pud_offset(pgd, 0);
+	pud_t *pud = pud_offset(p4d, 0);
 	unsigned long addr;
 	unsigned int i;
 
@@ -304,11 +304,13 @@ static void walk_pagetables(struct pg_state *st)
 	 * the hash pagetable.
 	 */
 	for (i = pgd_index(addr); i < PTRS_PER_PGD; i++, pgd++, addr += PGDIR_SIZE) {
-		if (!pgd_none(*pgd) && !pgd_is_leaf(*pgd))
-			/* pgd exists */
-			walk_pud(st, pgd, addr);
+		p4d_t *p4d = p4d_offset(pgd, 0);
+
+		if (!p4d_none(*p4d) && !p4d_is_leaf(*p4d))
+			/* p4d exists */
+			walk_pud(st, p4d, addr);
 		else
-			note_page(st, addr, 1, pgd_val(*pgd));
+			note_page(st, addr, 1, p4d_val(*p4d));
 	}
 }
 
diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index eb82dda884e5..0edcfd0b491d 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -976,7 +976,7 @@ static int thread_imc_event_init(struct perf_event *event)
 	if (event->attr.type != event->pmu->type)
 		return -ENOENT;
 
-	if (!capable(CAP_SYS_ADMIN))
+	if (!perfmon_capable())
 		return -EACCES;
 
 	/* Sampling not supported */
@@ -1412,7 +1412,7 @@ static int trace_imc_event_init(struct perf_event *event)
 	if (event->attr.type != event->pmu->type)
 		return -ENOENT;
 
-	if (!capable(CAP_SYS_ADMIN))
+	if (!perfmon_capable())
 		return -EACCES;
 
 	/* Return if this is a couting event */
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index dc7a5bae8f1c..76fca495fff3 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -51,11 +51,11 @@
 
 /* CHRP NVRAM header */
 struct chrp_header {
-  u8		signature;
-  u8		cksum;
-  u16		len;
-  char          name[12];
-  u8		data[0];
+	u8		signature;
+	u8		cksum;
+	u16		len;
+	char		name[12];
+	u8		data[];
 };
 
 struct core99_header {
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index c0f8120045c3..fe3f0fb5aeca 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_MEMORY_FAILURE)	+= opal-memory-errors.o
 obj-$(CONFIG_OPAL_PRD)	+= opal-prd.o
 obj-$(CONFIG_PERF_EVENTS) += opal-imc.o
 obj-$(CONFIG_PPC_MEMTRACE)	+= memtrace.o
-obj-$(CONFIG_PPC_VAS)	+= vas.o vas-window.o vas-debug.o
+obj-$(CONFIG_PPC_VAS)	+= vas.o vas-window.o vas-debug.o vas-fault.o vas-api.o
 obj-$(CONFIG_OCXL_BASE)	+= ocxl.o
 obj-$(CONFIG_SCOM_DEBUGFS) += opal-xscom.o
 obj-$(CONFIG_PPC_SECURE_BOOT) += opal-secvar.o
diff --git a/arch/powerpc/platforms/powernv/vas-api.c b/arch/powerpc/platforms/powernv/vas-api.c
new file mode 100644
index 000000000000..98ed5d8c5441
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/vas-api.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * VAS user space API for its accelerators (Only NX-GZIP is supported now)
+ * Copyright (C) 2019 Haren Myneni, IBM Corp
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <asm/vas.h>
+#include <uapi/asm/vas-api.h>
+#include "vas.h"
+
+/*
+ * The driver creates the device node that can be used as follows:
+ * For NX-GZIP
+ *
+ *	fd = open("/dev/crypto/nx-gzip", O_RDWR);
+ *	rc = ioctl(fd, VAS_TX_WIN_OPEN, &attr);
+ *	paste_addr = mmap(NULL, PAGE_SIZE, prot, MAP_SHARED, fd, 0ULL).
+ *	vas_copy(&crb, 0, 1);
+ *	vas_paste(paste_addr, 0, 1);
+ *	close(fd) or exit process to close window.
+ *
+ * where "vas_copy" and "vas_paste" are defined in copy-paste.h.
+ * copy/paste returns to the user space directly. So refer NX hardware
+ * documententation for exact copy/paste usage and completion / error
+ * conditions.
+ */
+
+/*
+ * Wrapper object for the nx-gzip device - there is just one instance of
+ * this node for the whole system.
+ */
+static struct coproc_dev {
+	struct cdev cdev;
+	struct device *device;
+	char *name;
+	dev_t devt;
+	struct class *class;
+	enum vas_cop_type cop_type;
+} coproc_device;
+
+struct coproc_instance {
+	struct coproc_dev *coproc;
+	struct vas_window *txwin;
+};
+
+static char *coproc_devnode(struct device *dev, umode_t *mode)
+{
+	return kasprintf(GFP_KERNEL, "crypto/%s", dev_name(dev));
+}
+
+static int coproc_open(struct inode *inode, struct file *fp)
+{
+	struct coproc_instance *cp_inst;
+
+	cp_inst = kzalloc(sizeof(*cp_inst), GFP_KERNEL);
+	if (!cp_inst)
+		return -ENOMEM;
+
+	cp_inst->coproc = container_of(inode->i_cdev, struct coproc_dev,
+					cdev);
+	fp->private_data = cp_inst;
+
+	return 0;
+}
+
+static int coproc_ioc_tx_win_open(struct file *fp, unsigned long arg)
+{
+	void __user *uptr = (void __user *)arg;
+	struct vas_tx_win_attr txattr = {};
+	struct vas_tx_win_open_attr uattr;
+	struct coproc_instance *cp_inst;
+	struct vas_window *txwin;
+	int rc, vasid;
+
+	cp_inst = fp->private_data;
+
+	/*
+	 * One window for file descriptor
+	 */
+	if (cp_inst->txwin)
+		return -EEXIST;
+
+	rc = copy_from_user(&uattr, uptr, sizeof(uattr));
+	if (rc) {
+		pr_err("%s(): copy_from_user() returns %d\n", __func__, rc);
+		return -EFAULT;
+	}
+
+	if (uattr.version != 1) {
+		pr_err("Invalid version\n");
+		return -EINVAL;
+	}
+
+	vasid = uattr.vas_id;
+
+	vas_init_tx_win_attr(&txattr, cp_inst->coproc->cop_type);
+
+	txattr.lpid = mfspr(SPRN_LPID);
+	txattr.pidr = mfspr(SPRN_PID);
+	txattr.user_win = true;
+	txattr.rsvd_txbuf_count = false;
+	txattr.pswid = false;
+
+	pr_devel("Pid %d: Opening txwin, PIDR %ld\n", txattr.pidr,
+				mfspr(SPRN_PID));
+
+	txwin = vas_tx_win_open(vasid, cp_inst->coproc->cop_type, &txattr);
+	if (IS_ERR(txwin)) {
+		pr_err("%s() vas_tx_win_open() failed, %ld\n", __func__,
+					PTR_ERR(txwin));
+		return PTR_ERR(txwin);
+	}
+
+	cp_inst->txwin = txwin;
+
+	return 0;
+}
+
+static int coproc_release(struct inode *inode, struct file *fp)
+{
+	struct coproc_instance *cp_inst = fp->private_data;
+
+	if (cp_inst->txwin) {
+		vas_win_close(cp_inst->txwin);
+		cp_inst->txwin = NULL;
+	}
+
+	kfree(cp_inst);
+	fp->private_data = NULL;
+
+	/*
+	 * We don't know here if user has other receive windows
+	 * open, so we can't really call clear_thread_tidr().
+	 * So, once the process calls set_thread_tidr(), the
+	 * TIDR value sticks around until process exits, resulting
+	 * in an extra copy in restore_sprs().
+	 */
+
+	return 0;
+}
+
+static int coproc_mmap(struct file *fp, struct vm_area_struct *vma)
+{
+	struct coproc_instance *cp_inst = fp->private_data;
+	struct vas_window *txwin;
+	unsigned long pfn;
+	u64 paste_addr;
+	pgprot_t prot;
+	int rc;
+
+	txwin = cp_inst->txwin;
+
+	if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
+		pr_debug("%s(): size 0x%zx, PAGE_SIZE 0x%zx\n", __func__,
+				(vma->vm_end - vma->vm_start), PAGE_SIZE);
+		return -EINVAL;
+	}
+
+	/* Ensure instance has an open send window */
+	if (!txwin) {
+		pr_err("%s(): No send window open?\n", __func__);
+		return -EINVAL;
+	}
+
+	vas_win_paste_addr(txwin, &paste_addr, NULL);
+	pfn = paste_addr >> PAGE_SHIFT;
+
+	/* flags, page_prot from cxl_mmap(), except we want cachable */
+	vma->vm_flags |= VM_IO | VM_PFNMAP;
+	vma->vm_page_prot = pgprot_cached(vma->vm_page_prot);
+
+	prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_DIRTY);
+
+	rc = remap_pfn_range(vma, vma->vm_start, pfn + vma->vm_pgoff,
+			vma->vm_end - vma->vm_start, prot);
+
+	pr_devel("%s(): paste addr %llx at %lx, rc %d\n", __func__,
+			paste_addr, vma->vm_start, rc);
+
+	return rc;
+}
+
+static long coproc_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case VAS_TX_WIN_OPEN:
+		return coproc_ioc_tx_win_open(fp, arg);
+	default:
+		return -EINVAL;
+	}
+}
+
+static struct file_operations coproc_fops = {
+	.open = coproc_open,
+	.release = coproc_release,
+	.mmap = coproc_mmap,
+	.unlocked_ioctl = coproc_ioctl,
+};
+
+/*
+ * Supporting only nx-gzip coprocessor type now, but this API code
+ * extended to other coprocessor types later.
+ */
+int vas_register_coproc_api(struct module *mod, enum vas_cop_type cop_type,
+				const char *name)
+{
+	int rc = -EINVAL;
+	dev_t devno;
+
+	rc = alloc_chrdev_region(&coproc_device.devt, 1, 1, name);
+	if (rc) {
+		pr_err("Unable to allocate coproc major number: %i\n", rc);
+		return rc;
+	}
+
+	pr_devel("%s device allocated, dev [%i,%i]\n", name,
+			MAJOR(coproc_device.devt), MINOR(coproc_device.devt));
+
+	coproc_device.class = class_create(mod, name);
+	if (IS_ERR(coproc_device.class)) {
+		rc = PTR_ERR(coproc_device.class);
+		pr_err("Unable to create %s class %d\n", name, rc);
+		goto err_class;
+	}
+	coproc_device.class->devnode = coproc_devnode;
+	coproc_device.cop_type = cop_type;
+
+	coproc_fops.owner = mod;
+	cdev_init(&coproc_device.cdev, &coproc_fops);
+
+	devno = MKDEV(MAJOR(coproc_device.devt), 0);
+	rc = cdev_add(&coproc_device.cdev, devno, 1);
+	if (rc) {
+		pr_err("cdev_add() failed %d\n", rc);
+		goto err_cdev;
+	}
+
+	coproc_device.device = device_create(coproc_device.class, NULL,
+			devno, NULL, name, MINOR(devno));
+	if (IS_ERR(coproc_device.device)) {
+		rc = PTR_ERR(coproc_device.device);
+		pr_err("Unable to create coproc-%d %d\n", MINOR(devno), rc);
+		goto err;
+	}
+
+	pr_devel("%s: Added dev [%d,%d]\n", __func__, MAJOR(devno),
+			MINOR(devno));
+
+	return 0;
+
+err:
+	cdev_del(&coproc_device.cdev);
+err_cdev:
+	class_destroy(coproc_device.class);
+err_class:
+	unregister_chrdev_region(coproc_device.devt, 1);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(vas_register_coproc_api);
+
+void vas_unregister_coproc_api(void)
+{
+	dev_t devno;
+
+	cdev_del(&coproc_device.cdev);
+	devno = MKDEV(MAJOR(coproc_device.devt), 0);
+	device_destroy(coproc_device.class, devno);
+
+	class_destroy(coproc_device.class);
+	unregister_chrdev_region(coproc_device.devt, 1);
+}
+EXPORT_SYMBOL_GPL(vas_unregister_coproc_api);
diff --git a/arch/powerpc/platforms/powernv/vas-debug.c b/arch/powerpc/platforms/powernv/vas-debug.c
index 44035a3d6414..41fa90d2f4ab 100644
--- a/arch/powerpc/platforms/powernv/vas-debug.c
+++ b/arch/powerpc/platforms/powernv/vas-debug.c
@@ -38,7 +38,7 @@ static int info_show(struct seq_file *s, void *private)
 
 	seq_printf(s, "Type: %s, %s\n", cop_to_str(window->cop),
 					window->tx_win ? "Send" : "Receive");
-	seq_printf(s, "Pid : %d\n", window->pid);
+	seq_printf(s, "Pid : %d\n", vas_window_pid(window));
 
 unlock:
 	mutex_unlock(&vas_mutex);
diff --git a/arch/powerpc/platforms/powernv/vas-fault.c b/arch/powerpc/platforms/powernv/vas-fault.c
new file mode 100644
index 000000000000..266a6ca5e15e
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/vas-fault.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * VAS Fault handling.
+ * Copyright 2019, IBM Corporation
+ */
+
+#define pr_fmt(fmt) "vas: " fmt
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/kthread.h>
+#include <linux/sched/signal.h>
+#include <linux/mmu_context.h>
+#include <asm/icswx.h>
+
+#include "vas.h"
+
+/*
+ * The maximum FIFO size for fault window can be 8MB
+ * (VAS_RX_FIFO_SIZE_MAX). Using 4MB FIFO since each VAS
+ * instance will be having fault window.
+ * 8MB FIFO can be used if expects more faults for each VAS
+ * instance.
+ */
+#define VAS_FAULT_WIN_FIFO_SIZE	(4 << 20)
+
+static void dump_crb(struct coprocessor_request_block *crb)
+{
+	struct data_descriptor_entry *dde;
+	struct nx_fault_stamp *nx;
+
+	dde = &crb->source;
+	pr_devel("SrcDDE: addr 0x%llx, len %d, count %d, idx %d, flags %d\n",
+		be64_to_cpu(dde->address), be32_to_cpu(dde->length),
+		dde->count, dde->index, dde->flags);
+
+	dde = &crb->target;
+	pr_devel("TgtDDE: addr 0x%llx, len %d, count %d, idx %d, flags %d\n",
+		be64_to_cpu(dde->address), be32_to_cpu(dde->length),
+		dde->count, dde->index, dde->flags);
+
+	nx = &crb->stamp.nx;
+	pr_devel("NX Stamp: PSWID 0x%x, FSA 0x%llx, flags 0x%x, FS 0x%x\n",
+		be32_to_cpu(nx->pswid),
+		be64_to_cpu(crb->stamp.nx.fault_storage_addr),
+		nx->flags, nx->fault_status);
+}
+
+/*
+ * Update the CSB to indicate a translation error.
+ *
+ * User space will be polling on CSB after the request is issued.
+ * If NX can handle the request without any issues, it updates CSB.
+ * Whereas if NX encounters page fault, the kernel will handle the
+ * fault and update CSB with translation error.
+ *
+ * If we are unable to update the CSB means copy_to_user failed due to
+ * invalid csb_addr, send a signal to the process.
+ */
+static void update_csb(struct vas_window *window,
+			struct coprocessor_request_block *crb)
+{
+	struct coprocessor_status_block csb;
+	struct kernel_siginfo info;
+	struct task_struct *tsk;
+	void __user *csb_addr;
+	struct pid *pid;
+	int rc;
+
+	/*
+	 * NX user space windows can not be opened for task->mm=NULL
+	 * and faults will not be generated for kernel requests.
+	 */
+	if (WARN_ON_ONCE(!window->mm || !window->user_win))
+		return;
+
+	csb_addr = (void __user *)be64_to_cpu(crb->csb_addr);
+
+	memset(&csb, 0, sizeof(csb));
+	csb.cc = CSB_CC_TRANSLATION;
+	csb.ce = CSB_CE_TERMINATION;
+	csb.cs = 0;
+	csb.count = 0;
+
+	/*
+	 * NX operates and returns in BE format as defined CRB struct.
+	 * So saves fault_storage_addr in BE as NX pastes in FIFO and
+	 * expects user space to convert to CPU format.
+	 */
+	csb.address = crb->stamp.nx.fault_storage_addr;
+	csb.flags = 0;
+
+	pid = window->pid;
+	tsk = get_pid_task(pid, PIDTYPE_PID);
+	/*
+	 * Process closes send window after all pending NX requests are
+	 * completed. In multi-thread applications, a child thread can
+	 * open a window and can exit without closing it. May be some
+	 * requests are pending or this window can be used by other
+	 * threads later. We should handle faults if NX encounters
+	 * pages faults on these requests. Update CSB with translation
+	 * error and fault address. If csb_addr passed by user space is
+	 * invalid, send SEGV signal to pid saved in window. If the
+	 * child thread is not running, send the signal to tgid.
+	 * Parent thread (tgid) will close this window upon its exit.
+	 *
+	 * pid and mm references are taken when window is opened by
+	 * process (pid). So tgid is used only when child thread opens
+	 * a window and exits without closing it.
+	 */
+	if (!tsk) {
+		pid = window->tgid;
+		tsk = get_pid_task(pid, PIDTYPE_PID);
+		/*
+		 * Parent thread (tgid) will be closing window when it
+		 * exits. So should not get here.
+		 */
+		if (WARN_ON_ONCE(!tsk))
+			return;
+	}
+
+	/* Return if the task is exiting. */
+	if (tsk->flags & PF_EXITING) {
+		put_task_struct(tsk);
+		return;
+	}
+
+	kthread_use_mm(window->mm);
+	rc = copy_to_user(csb_addr, &csb, sizeof(csb));
+	/*
+	 * User space polls on csb.flags (first byte). So add barrier
+	 * then copy first byte with csb flags update.
+	 */
+	if (!rc) {
+		csb.flags = CSB_V;
+		/* Make sure update to csb.flags is visible now */
+		smp_mb();
+		rc = copy_to_user(csb_addr, &csb, sizeof(u8));
+	}
+	kthread_unuse_mm(window->mm);
+	put_task_struct(tsk);
+
+	/* Success */
+	if (!rc)
+		return;
+
+	pr_debug("Invalid CSB address 0x%p signalling pid(%d)\n",
+			csb_addr, pid_vnr(pid));
+
+	clear_siginfo(&info);
+	info.si_signo = SIGSEGV;
+	info.si_errno = EFAULT;
+	info.si_code = SEGV_MAPERR;
+	info.si_addr = csb_addr;
+
+	/*
+	 * process will be polling on csb.flags after request is sent to
+	 * NX. So generally CSB update should not fail except when an
+	 * application passes invalid csb_addr. So an error message will
+	 * be displayed and leave it to user space whether to ignore or
+	 * handle this signal.
+	 */
+	rcu_read_lock();
+	rc = kill_pid_info(SIGSEGV, &info, pid);
+	rcu_read_unlock();
+
+	pr_devel("%s(): pid %d kill_proc_info() rc %d\n", __func__,
+			pid_vnr(pid), rc);
+}
+
+static void dump_fifo(struct vas_instance *vinst, void *entry)
+{
+	unsigned long *end = vinst->fault_fifo + vinst->fault_fifo_size;
+	unsigned long *fifo = entry;
+	int i;
+
+	pr_err("Fault fifo size %d, Max crbs %d\n", vinst->fault_fifo_size,
+			vinst->fault_fifo_size / CRB_SIZE);
+
+	/* Dump 10 CRB entries or until end of FIFO */
+	pr_err("Fault FIFO Dump:\n");
+	for (i = 0; i < 10*(CRB_SIZE/8) && fifo < end; i += 4, fifo += 4) {
+		pr_err("[%.3d, %p]: 0x%.16lx 0x%.16lx 0x%.16lx 0x%.16lx\n",
+			i, fifo, *fifo, *(fifo+1), *(fifo+2), *(fifo+3));
+	}
+}
+
+/*
+ * Process valid CRBs in fault FIFO.
+ * NX process user space requests, return credit and update the status
+ * in CRB. If it encounters transalation error when accessing CRB or
+ * request buffers, raises interrupt on the CPU to handle the fault.
+ * It takes credit on fault window, updates nx_fault_stamp in CRB with
+ * the following information and pastes CRB in fault FIFO.
+ *
+ * pswid - window ID of the window on which the request is sent.
+ * fault_storage_addr - fault address
+ *
+ * It can raise a single interrupt for multiple faults. Expects OS to
+ * process all valid faults and return credit for each fault on user
+ * space and fault windows. This fault FIFO control will be done with
+ * credit mechanism. NX can continuously paste CRBs until credits are not
+ * available on fault window. Otherwise, returns with RMA_reject.
+ *
+ * Total credits available on fault window: FIFO_SIZE(4MB)/CRBS_SIZE(128)
+ *
+ */
+irqreturn_t vas_fault_thread_fn(int irq, void *data)
+{
+	struct vas_instance *vinst = data;
+	struct coprocessor_request_block *crb, *entry;
+	struct coprocessor_request_block buf;
+	struct vas_window *window;
+	unsigned long flags;
+	void *fifo;
+
+	crb = &buf;
+
+	/*
+	 * VAS can interrupt with multiple page faults. So process all
+	 * valid CRBs within fault FIFO until reaches invalid CRB.
+	 * We use CCW[0] and pswid to validate validate CRBs:
+	 *
+	 * CCW[0]	Reserved bit. When NX pastes CRB, CCW[0]=0
+	 *		OS sets this bit to 1 after reading CRB.
+	 * pswid	NX assigns window ID. Set pswid to -1 after
+	 *		reading CRB from fault FIFO.
+	 *
+	 * We exit this function if no valid CRBs are available to process.
+	 * So acquire fault_lock and reset fifo_in_progress to 0 before
+	 * exit.
+	 * In case kernel receives another interrupt with different page
+	 * fault, interrupt handler returns with IRQ_HANDLED if
+	 * fifo_in_progress is set. Means these new faults will be
+	 * handled by the current thread. Otherwise set fifo_in_progress
+	 * and return IRQ_WAKE_THREAD to wake up thread.
+	 */
+	while (true) {
+		spin_lock_irqsave(&vinst->fault_lock, flags);
+		/*
+		 * Advance the fault fifo pointer to next CRB.
+		 * Use CRB_SIZE rather than sizeof(*crb) since the latter is
+		 * aligned to CRB_ALIGN (256) but the CRB written to by VAS is
+		 * only CRB_SIZE in len.
+		 */
+		fifo = vinst->fault_fifo + (vinst->fault_crbs * CRB_SIZE);
+		entry = fifo;
+
+		if ((entry->stamp.nx.pswid == cpu_to_be32(FIFO_INVALID_ENTRY))
+			|| (entry->ccw & cpu_to_be32(CCW0_INVALID))) {
+			vinst->fifo_in_progress = 0;
+			spin_unlock_irqrestore(&vinst->fault_lock, flags);
+			return IRQ_HANDLED;
+		}
+
+		spin_unlock_irqrestore(&vinst->fault_lock, flags);
+		vinst->fault_crbs++;
+		if (vinst->fault_crbs == (vinst->fault_fifo_size / CRB_SIZE))
+			vinst->fault_crbs = 0;
+
+		memcpy(crb, fifo, CRB_SIZE);
+		entry->stamp.nx.pswid = cpu_to_be32(FIFO_INVALID_ENTRY);
+		entry->ccw |= cpu_to_be32(CCW0_INVALID);
+		/*
+		 * Return credit for the fault window.
+		 */
+		vas_return_credit(vinst->fault_win, false);
+
+		pr_devel("VAS[%d] fault_fifo %p, fifo %p, fault_crbs %d\n",
+				vinst->vas_id, vinst->fault_fifo, fifo,
+				vinst->fault_crbs);
+
+		dump_crb(crb);
+		window = vas_pswid_to_window(vinst,
+				be32_to_cpu(crb->stamp.nx.pswid));
+
+		if (IS_ERR(window)) {
+			/*
+			 * We got an interrupt about a specific send
+			 * window but we can't find that window and we can't
+			 * even clean it up (return credit on user space
+			 * window).
+			 * But we should not get here.
+			 * TODO: Disable IRQ.
+			 */
+			dump_fifo(vinst, (void *)entry);
+			pr_err("VAS[%d] fault_fifo %p, fifo %p, pswid 0x%x, fault_crbs %d bad CRB?\n",
+				vinst->vas_id, vinst->fault_fifo, fifo,
+				be32_to_cpu(crb->stamp.nx.pswid),
+				vinst->fault_crbs);
+
+			WARN_ON_ONCE(1);
+		} else {
+			update_csb(window, crb);
+			/*
+			 * Return credit for send window after processing
+			 * fault CRB.
+			 */
+			vas_return_credit(window, true);
+		}
+	}
+}
+
+irqreturn_t vas_fault_handler(int irq, void *dev_id)
+{
+	struct vas_instance *vinst = dev_id;
+	irqreturn_t ret = IRQ_WAKE_THREAD;
+	unsigned long flags;
+
+	/*
+	 * NX can generate an interrupt for multiple faults. So the
+	 * fault handler thread process all CRBs until finds invalid
+	 * entry. In case if NX sees continuous faults, it is possible
+	 * that the thread function entered with the first interrupt
+	 * can execute and process all valid CRBs.
+	 * So wake up thread only if the fault thread is not in progress.
+	 */
+	spin_lock_irqsave(&vinst->fault_lock, flags);
+
+	if (vinst->fifo_in_progress)
+		ret = IRQ_HANDLED;
+	else
+		vinst->fifo_in_progress = 1;
+
+	spin_unlock_irqrestore(&vinst->fault_lock, flags);
+
+	return ret;
+}
+
+/*
+ * Fault window is opened per VAS instance. NX pastes fault CRB in fault
+ * FIFO upon page faults.
+ */
+int vas_setup_fault_window(struct vas_instance *vinst)
+{
+	struct vas_rx_win_attr attr;
+
+	vinst->fault_fifo_size = VAS_FAULT_WIN_FIFO_SIZE;
+	vinst->fault_fifo = kzalloc(vinst->fault_fifo_size, GFP_KERNEL);
+	if (!vinst->fault_fifo) {
+		pr_err("Unable to alloc %d bytes for fault_fifo\n",
+				vinst->fault_fifo_size);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Invalidate all CRB entries. NX pastes valid entry for each fault.
+	 */
+	memset(vinst->fault_fifo, FIFO_INVALID_ENTRY, vinst->fault_fifo_size);
+	vas_init_rx_win_attr(&attr, VAS_COP_TYPE_FAULT);
+
+	attr.rx_fifo_size = vinst->fault_fifo_size;
+	attr.rx_fifo = vinst->fault_fifo;
+
+	/*
+	 * Max creds is based on number of CRBs can fit in the FIFO.
+	 * (fault_fifo_size/CRB_SIZE). If 8MB FIFO is used, max creds
+	 * will be 0xffff since the receive creds field is 16bits wide.
+	 */
+	attr.wcreds_max = vinst->fault_fifo_size / CRB_SIZE;
+	attr.lnotify_lpid = 0;
+	attr.lnotify_pid = mfspr(SPRN_PID);
+	attr.lnotify_tid = mfspr(SPRN_PID);
+
+	vinst->fault_win = vas_rx_win_open(vinst->vas_id, VAS_COP_TYPE_FAULT,
+					&attr);
+
+	if (IS_ERR(vinst->fault_win)) {
+		pr_err("VAS: Error %ld opening FaultWin\n",
+			PTR_ERR(vinst->fault_win));
+		kfree(vinst->fault_fifo);
+		return PTR_ERR(vinst->fault_win);
+	}
+
+	pr_devel("VAS: Created FaultWin %d, LPID/PID/TID [%d/%d/%d]\n",
+			vinst->fault_win->winid, attr.lnotify_lpid,
+			attr.lnotify_pid, attr.lnotify_tid);
+
+	return 0;
+}
diff --git a/arch/powerpc/platforms/powernv/vas-window.c b/arch/powerpc/platforms/powernv/vas-window.c
index 0c0d27d17976..6434f9cb5aed 100644
--- a/arch/powerpc/platforms/powernv/vas-window.c
+++ b/arch/powerpc/platforms/powernv/vas-window.c
@@ -12,6 +12,8 @@
 #include <linux/log2.h>
 #include <linux/rcupdate.h>
 #include <linux/cred.h>
+#include <linux/sched/mm.h>
+#include <linux/mmu_context.h>
 #include <asm/switch_to.h>
 #include <asm/ppc-opcode.h>
 #include "vas.h"
@@ -24,7 +26,7 @@
  * Compute the paste address region for the window @window using the
  * ->paste_base_addr and ->paste_win_id_shift we got from device tree.
  */
-static void compute_paste_address(struct vas_window *window, u64 *addr, int *len)
+void vas_win_paste_addr(struct vas_window *window, u64 *addr, int *len)
 {
 	int winid;
 	u64 base, shift;
@@ -78,7 +80,7 @@ static void *map_paste_region(struct vas_window *txwin)
 		goto free_name;
 
 	txwin->paste_addr_name = name;
-	compute_paste_address(txwin, &start, &len);
+	vas_win_paste_addr(txwin, &start, &len);
 
 	if (!request_mem_region(start, len, name)) {
 		pr_devel("%s(): request_mem_region(0x%llx, %d) failed\n",
@@ -136,7 +138,7 @@ static void unmap_paste_region(struct vas_window *window)
 	u64 busaddr_start;
 
 	if (window->paste_kaddr) {
-		compute_paste_address(window, &busaddr_start, &len);
+		vas_win_paste_addr(window, &busaddr_start, &len);
 		unmap_region(window->paste_kaddr, busaddr_start, len);
 		window->paste_kaddr = NULL;
 		kfree(window->paste_addr_name);
@@ -373,7 +375,7 @@ int init_winctx_regs(struct vas_window *window, struct vas_winctx *winctx)
 	init_xlate_regs(window, winctx->user_win);
 
 	val = 0ULL;
-	val = SET_FIELD(VAS_FAULT_TX_WIN, val, 0);
+	val = SET_FIELD(VAS_FAULT_TX_WIN, val, winctx->fault_win_id);
 	write_hvwc_reg(window, VREG(FAULT_TX_WIN), val);
 
 	/* In PowerNV, interrupts go to HV. */
@@ -748,6 +750,8 @@ static void init_winctx_for_rxwin(struct vas_window *rxwin,
 
 	winctx->min_scope = VAS_SCOPE_LOCAL;
 	winctx->max_scope = VAS_SCOPE_VECTORED_GROUP;
+	if (rxwin->vinst->virq)
+		winctx->irq_port = rxwin->vinst->irq_port;
 }
 
 static bool rx_win_args_valid(enum vas_cop_type cop,
@@ -768,7 +772,7 @@ static bool rx_win_args_valid(enum vas_cop_type cop,
 	if (attr->rx_fifo_size > VAS_RX_FIFO_SIZE_MAX)
 		return false;
 
-	if (attr->wcreds_max > VAS_RX_WCREDS_MAX)
+	if (!attr->wcreds_max)
 		return false;
 
 	if (attr->nx_win) {
@@ -813,7 +817,8 @@ void vas_init_rx_win_attr(struct vas_rx_win_attr *rxattr, enum vas_cop_type cop)
 {
 	memset(rxattr, 0, sizeof(*rxattr));
 
-	if (cop == VAS_COP_TYPE_842 || cop == VAS_COP_TYPE_842_HIPRI) {
+	if (cop == VAS_COP_TYPE_842 || cop == VAS_COP_TYPE_842_HIPRI ||
+		cop == VAS_COP_TYPE_GZIP || cop == VAS_COP_TYPE_GZIP_HIPRI) {
 		rxattr->pin_win = true;
 		rxattr->nx_win = true;
 		rxattr->fault_win = false;
@@ -827,9 +832,9 @@ void vas_init_rx_win_attr(struct vas_rx_win_attr *rxattr, enum vas_cop_type cop)
 		rxattr->fault_win = true;
 		rxattr->notify_disable = true;
 		rxattr->rx_wcred_mode = true;
-		rxattr->tx_wcred_mode = true;
 		rxattr->rx_win_ord_mode = true;
-		rxattr->tx_win_ord_mode = true;
+		rxattr->rej_no_credit = true;
+		rxattr->tc_mode = VAS_THRESH_DISABLED;
 	} else if (cop == VAS_COP_TYPE_FTW) {
 		rxattr->user_win = true;
 		rxattr->intr_disable = true;
@@ -873,9 +878,7 @@ struct vas_window *vas_rx_win_open(int vasid, enum vas_cop_type cop,
 	rxwin->nx_win = rxattr->nx_win;
 	rxwin->user_win = rxattr->user_win;
 	rxwin->cop = cop;
-	rxwin->wcreds_max = rxattr->wcreds_max ?: VAS_WCREDS_DEFAULT;
-	if (rxattr->user_win)
-		rxwin->pid = task_pid_vnr(current);
+	rxwin->wcreds_max = rxattr->wcreds_max;
 
 	init_winctx_for_rxwin(rxwin, rxattr, &winctx);
 	init_winctx_regs(rxwin, &winctx);
@@ -890,7 +893,8 @@ void vas_init_tx_win_attr(struct vas_tx_win_attr *txattr, enum vas_cop_type cop)
 {
 	memset(txattr, 0, sizeof(*txattr));
 
-	if (cop == VAS_COP_TYPE_842 || cop == VAS_COP_TYPE_842_HIPRI) {
+	if (cop == VAS_COP_TYPE_842 || cop == VAS_COP_TYPE_842_HIPRI ||
+		cop == VAS_COP_TYPE_GZIP || cop == VAS_COP_TYPE_GZIP_HIPRI) {
 		txattr->rej_no_credit = false;
 		txattr->rx_wcred_mode = true;
 		txattr->tx_wcred_mode = true;
@@ -944,13 +948,22 @@ static void init_winctx_for_txwin(struct vas_window *txwin,
 	winctx->lpid = txattr->lpid;
 	winctx->pidr = txattr->pidr;
 	winctx->rx_win_id = txwin->rxwin->winid;
+	/*
+	 * IRQ and fault window setup is successful. Set fault window
+	 * for the send window so that ready to handle faults.
+	 */
+	if (txwin->vinst->virq)
+		winctx->fault_win_id = txwin->vinst->fault_win->winid;
 
 	winctx->dma_type = VAS_DMA_TYPE_INJECT;
 	winctx->tc_mode = txattr->tc_mode;
 	winctx->min_scope = VAS_SCOPE_LOCAL;
 	winctx->max_scope = VAS_SCOPE_VECTORED_GROUP;
+	if (txwin->vinst->virq)
+		winctx->irq_port = txwin->vinst->irq_port;
 
-	winctx->pswid = 0;
+	winctx->pswid = txattr->pswid ? txattr->pswid :
+			encode_pswid(txwin->vinst->vas_id, txwin->winid);
 }
 
 static bool tx_win_args_valid(enum vas_cop_type cop,
@@ -965,9 +978,14 @@ static bool tx_win_args_valid(enum vas_cop_type cop,
 	if (attr->wcreds_max > VAS_TX_WCREDS_MAX)
 		return false;
 
-	if (attr->user_win &&
-			(cop != VAS_COP_TYPE_FTW || attr->rsvd_txbuf_count))
-		return false;
+	if (attr->user_win) {
+		if (attr->rsvd_txbuf_count)
+			return false;
+
+		if (cop != VAS_COP_TYPE_FTW && cop != VAS_COP_TYPE_GZIP &&
+			cop != VAS_COP_TYPE_GZIP_HIPRI)
+			return false;
+	}
 
 	return true;
 }
@@ -1016,7 +1034,6 @@ struct vas_window *vas_tx_win_open(int vasid, enum vas_cop_type cop,
 	txwin->tx_win = 1;
 	txwin->rxwin = rxwin;
 	txwin->nx_win = txwin->rxwin->nx_win;
-	txwin->pid = attr->pid;
 	txwin->user_win = attr->user_win;
 	txwin->wcreds_max = attr->wcreds_max ?: VAS_WCREDS_DEFAULT;
 
@@ -1040,12 +1057,59 @@ struct vas_window *vas_tx_win_open(int vasid, enum vas_cop_type cop,
 		}
 	} else {
 		/*
-		 * A user mapping must ensure that context switch issues
-		 * CP_ABORT for this thread.
+		 * Interrupt hanlder or fault window setup failed. Means
+		 * NX can not generate fault for page fault. So not
+		 * opening for user space tx window.
 		 */
-		rc = set_thread_uses_vas();
-		if (rc)
+		if (!vinst->virq) {
+			rc = -ENODEV;
 			goto free_window;
+		}
+
+		/*
+		 * Window opened by a child thread may not be closed when
+		 * it exits. So take reference to its pid and release it
+		 * when the window is free by parent thread.
+		 * Acquire a reference to the task's pid to make sure
+		 * pid will not be re-used - needed only for multithread
+		 * applications.
+		 */
+		txwin->pid = get_task_pid(current, PIDTYPE_PID);
+		/*
+		 * Acquire a reference to the task's mm.
+		 */
+		txwin->mm = get_task_mm(current);
+
+		if (!txwin->mm) {
+			put_pid(txwin->pid);
+			pr_err("VAS: pid(%d): mm_struct is not found\n",
+					current->pid);
+			rc = -EPERM;
+			goto free_window;
+		}
+
+		mmgrab(txwin->mm);
+		mmput(txwin->mm);
+		mm_context_add_vas_window(txwin->mm);
+		/*
+		 * Process closes window during exit. In the case of
+		 * multithread application, the child thread can open
+		 * window and can exit without closing it. Expects parent
+		 * thread to use and close the window. So do not need
+		 * to take pid reference for parent thread.
+		 */
+		txwin->tgid = find_get_pid(task_tgid_vnr(current));
+		/*
+		 * Even a process that has no foreign real address mapping can
+		 * use an unpaired COPY instruction (to no real effect). Issue
+		 * CP_ABORT to clear any pending COPY and prevent a covert
+		 * channel.
+		 *
+		 * __switch_to() will issue CP_ABORT on future context switches
+		 * if process / thread has any open VAS window (Use
+		 * current->mm->context.vas_windows).
+		 */
+		asm volatile(PPC_CP_ABORT);
 	}
 
 	set_vinst_win(vinst, txwin);
@@ -1128,6 +1192,7 @@ static void poll_window_credits(struct vas_window *window)
 {
 	u64 val;
 	int creds, mode;
+	int count = 0;
 
 	val = read_hvwc_reg(window, VREG(WINCTL));
 	if (window->tx_win)
@@ -1146,10 +1211,27 @@ static void poll_window_credits(struct vas_window *window)
 		creds = GET_FIELD(VAS_LRX_WCRED, val);
 	}
 
+	/*
+	 * Takes around few milliseconds to complete all pending requests
+	 * and return credits.
+	 * TODO: Scan fault FIFO and invalidate CRBs points to this window
+	 *       and issue CRB Kill to stop all pending requests. Need only
+	 *       if there is a bug in NX or fault handling in kernel.
+	 */
 	if (creds < window->wcreds_max) {
 		val = 0;
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		schedule_timeout(msecs_to_jiffies(10));
+		count++;
+		/*
+		 * Process can not close send window until all credits are
+		 * returned.
+		 */
+		if (!(count % 1000))
+			pr_warn_ratelimited("VAS: pid %d stuck. Waiting for credits returned for Window(%d). creds %d, Retries %d\n",
+				vas_window_pid(window), window->winid,
+				creds, count);
+
 		goto retry;
 	}
 }
@@ -1163,6 +1245,7 @@ static void poll_window_busy_state(struct vas_window *window)
 {
 	int busy;
 	u64 val;
+	int count = 0;
 
 retry:
 	val = read_hvwc_reg(window, VREG(WIN_STATUS));
@@ -1170,7 +1253,16 @@ static void poll_window_busy_state(struct vas_window *window)
 	if (busy) {
 		val = 0;
 		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(msecs_to_jiffies(5));
+		schedule_timeout(msecs_to_jiffies(10));
+		count++;
+		/*
+		 * Takes around few milliseconds to process all pending
+		 * requests.
+		 */
+		if (!(count % 1000))
+			pr_warn_ratelimited("VAS: pid %d stuck. Window (ID=%d) is in busy state. Retries %d\n",
+				vas_window_pid(window), window->winid, count);
+
 		goto retry;
 	}
 }
@@ -1235,22 +1327,118 @@ int vas_win_close(struct vas_window *window)
 
 	unmap_paste_region(window);
 
-	clear_vinst_win(window);
-
 	poll_window_busy_state(window);
 
 	unpin_close_window(window);
 
 	poll_window_credits(window);
 
+	clear_vinst_win(window);
+
 	poll_window_castout(window);
 
 	/* if send window, drop reference to matching receive window */
-	if (window->tx_win)
+	if (window->tx_win) {
+		if (window->user_win) {
+			/* Drop references to pid and mm */
+			put_pid(window->pid);
+			if (window->mm) {
+				mm_context_remove_vas_window(window->mm);
+				mmdrop(window->mm);
+			}
+		}
 		put_rx_win(window->rxwin);
+	}
 
 	vas_window_free(window);
 
 	return 0;
 }
 EXPORT_SYMBOL_GPL(vas_win_close);
+
+/*
+ * Return credit for the given window.
+ * Send windows and fault window uses credit mechanism as follows:
+ *
+ * Send windows:
+ * - The default number of credits available for each send window is
+ *   1024. It means 1024 requests can be issued asynchronously at the
+ *   same time. If the credit is not available, that request will be
+ *   returned with RMA_Busy.
+ * - One credit is taken when NX request is issued.
+ * - This credit is returned after NX processed that request.
+ * - If NX encounters translation error, kernel will return the
+ *   credit on the specific send window after processing the fault CRB.
+ *
+ * Fault window:
+ * - The total number credits available is FIFO_SIZE/CRB_SIZE.
+ *   Means 4MB/128 in the current implementation. If credit is not
+ *   available, RMA_Reject is returned.
+ * - A credit is taken when NX pastes CRB in fault FIFO.
+ * - The kernel with return credit on fault window after reading entry
+ *   from fault FIFO.
+ */
+void vas_return_credit(struct vas_window *window, bool tx)
+{
+	uint64_t val;
+
+	val = 0ULL;
+	if (tx) { /* send window */
+		val = SET_FIELD(VAS_TX_WCRED, val, 1);
+		write_hvwc_reg(window, VREG(TX_WCRED_ADDER), val);
+	} else {
+		val = SET_FIELD(VAS_LRX_WCRED, val, 1);
+		write_hvwc_reg(window, VREG(LRX_WCRED_ADDER), val);
+	}
+}
+
+struct vas_window *vas_pswid_to_window(struct vas_instance *vinst,
+		uint32_t pswid)
+{
+	struct vas_window *window;
+	int winid;
+
+	if (!pswid) {
+		pr_devel("%s: called for pswid 0!\n", __func__);
+		return ERR_PTR(-ESRCH);
+	}
+
+	decode_pswid(pswid, NULL, &winid);
+
+	if (winid >= VAS_WINDOWS_PER_CHIP)
+		return ERR_PTR(-ESRCH);
+
+	/*
+	 * If application closes the window before the hardware
+	 * returns the fault CRB, we should wait in vas_win_close()
+	 * for the pending requests. so the window must be active
+	 * and the process alive.
+	 *
+	 * If its a kernel process, we should not get any faults and
+	 * should not get here.
+	 */
+	window = vinst->windows[winid];
+
+	if (!window) {
+		pr_err("PSWID decode: Could not find window for winid %d pswid %d vinst 0x%p\n",
+			winid, pswid, vinst);
+		return NULL;
+	}
+
+	/*
+	 * Do some sanity checks on the decoded window.  Window should be
+	 * NX GZIP user send window. FTW windows should not incur faults
+	 * since their CRBs are ignored (not queued on FIFO or processed
+	 * by NX).
+	 */
+	if (!window->tx_win || !window->user_win || !window->nx_win ||
+			window->cop == VAS_COP_TYPE_FAULT ||
+			window->cop == VAS_COP_TYPE_FTW) {
+		pr_err("PSWID decode: id %d, tx %d, user %d, nx %d, cop %d\n",
+			winid, window->tx_win, window->user_win,
+			window->nx_win, window->cop);
+		WARN_ON(1);
+	}
+
+	return window;
+}
diff --git a/arch/powerpc/platforms/powernv/vas.c b/arch/powerpc/platforms/powernv/vas.c
index ed9cc6df329a..598e4cd563fb 100644
--- a/arch/powerpc/platforms/powernv/vas.c
+++ b/arch/powerpc/platforms/powernv/vas.c
@@ -14,7 +14,10 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/of.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
 #include <asm/prom.h>
+#include <asm/xive.h>
 
 #include "vas.h"
 
@@ -23,12 +26,37 @@ static LIST_HEAD(vas_instances);
 
 static DEFINE_PER_CPU(int, cpu_vas_id);
 
+static int vas_irq_fault_window_setup(struct vas_instance *vinst)
+{
+	char devname[64];
+	int rc = 0;
+
+	snprintf(devname, sizeof(devname), "vas-%d", vinst->vas_id);
+	rc = request_threaded_irq(vinst->virq, vas_fault_handler,
+				vas_fault_thread_fn, 0, devname, vinst);
+
+	if (rc) {
+		pr_err("VAS[%d]: Request IRQ(%d) failed with %d\n",
+				vinst->vas_id, vinst->virq, rc);
+		goto out;
+	}
+
+	rc = vas_setup_fault_window(vinst);
+	if (rc)
+		free_irq(vinst->virq, vinst);
+
+out:
+	return rc;
+}
+
 static int init_vas_instance(struct platform_device *pdev)
 {
-	int rc, cpu, vasid;
-	struct resource *res;
-	struct vas_instance *vinst;
 	struct device_node *dn = pdev->dev.of_node;
+	struct vas_instance *vinst;
+	struct xive_irq_data *xd;
+	uint32_t chipid, hwirq;
+	struct resource *res;
+	int rc, cpu, vasid;
 
 	rc = of_property_read_u32(dn, "ibm,vas-id", &vasid);
 	if (rc) {
@@ -36,6 +64,12 @@ static int init_vas_instance(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	rc = of_property_read_u32(dn, "ibm,chip-id", &chipid);
+	if (rc) {
+		pr_err("No ibm,chip-id property for %s?\n", pdev->name);
+		return -ENODEV;
+	}
+
 	if (pdev->num_resources != 4) {
 		pr_err("Unexpected DT configuration for [%s, %d]\n",
 				pdev->name, vasid);
@@ -69,9 +103,32 @@ static int init_vas_instance(struct platform_device *pdev)
 
 	vinst->paste_win_id_shift = 63 - res->end;
 
-	pr_devel("Initialized instance [%s, %d], paste_base 0x%llx, "
-			"paste_win_id_shift 0x%llx\n", pdev->name, vasid,
-			vinst->paste_base_addr, vinst->paste_win_id_shift);
+	hwirq = xive_native_alloc_irq_on_chip(chipid);
+	if (!hwirq) {
+		pr_err("Inst%d: Unable to allocate global irq for chip %d\n",
+				vinst->vas_id, chipid);
+		return -ENOENT;
+	}
+
+	vinst->virq = irq_create_mapping(NULL, hwirq);
+	if (!vinst->virq) {
+		pr_err("Inst%d: Unable to map global irq %d\n",
+				vinst->vas_id, hwirq);
+		return -EINVAL;
+	}
+
+	xd = irq_get_handler_data(vinst->virq);
+	if (!xd) {
+		pr_err("Inst%d: Invalid virq %d\n",
+				vinst->vas_id, vinst->virq);
+		return -EINVAL;
+	}
+
+	vinst->irq_port = xd->trig_page;
+	pr_devel("Initialized instance [%s, %d] paste_base 0x%llx paste_win_id_shift 0x%llx IRQ %d Port 0x%llx\n",
+			pdev->name, vasid, vinst->paste_base_addr,
+			vinst->paste_win_id_shift, vinst->virq,
+			vinst->irq_port);
 
 	for_each_possible_cpu(cpu) {
 		if (cpu_to_chip_id(cpu) == of_get_ibm_chip_id(dn))
@@ -82,6 +139,22 @@ static int init_vas_instance(struct platform_device *pdev)
 	list_add(&vinst->node, &vas_instances);
 	mutex_unlock(&vas_mutex);
 
+	spin_lock_init(&vinst->fault_lock);
+	/*
+	 * IRQ and fault handling setup is needed only for user space
+	 * send windows.
+	 */
+	if (vinst->virq) {
+		rc = vas_irq_fault_window_setup(vinst);
+		/*
+		 * Fault window is used only for user space send windows.
+		 * So if vinst->virq is NULL, tx_win_open returns -ENODEV
+		 * for user space.
+		 */
+		if (rc)
+			vinst->virq = 0;
+	}
+
 	vas_instance_init_dbgdir(vinst);
 
 	dev_set_drvdata(&pdev->dev, vinst);
diff --git a/arch/powerpc/platforms/powernv/vas.h b/arch/powerpc/platforms/powernv/vas.h
index 5574aec9ee88..70f793e8f6cc 100644
--- a/arch/powerpc/platforms/powernv/vas.h
+++ b/arch/powerpc/platforms/powernv/vas.h
@@ -101,11 +101,9 @@
 /*
  * Initial per-process credits.
  * Max send window credits:    4K-1 (12-bits in VAS_TX_WCRED)
- * Max receive window credits: 64K-1 (16 bits in VAS_LRX_WCRED)
  *
  * TODO: Needs tuning for per-process credits
  */
-#define VAS_RX_WCREDS_MAX		((64 << 10) - 1)
 #define VAS_TX_WCREDS_MAX		((4 << 10) - 1)
 #define VAS_WCREDS_DEFAULT		(1 << 10)
 
@@ -295,6 +293,22 @@ enum vas_notify_after_count {
 	VAS_NOTIFY_AFTER_2
 };
 
+/*
+ * NX can generate an interrupt for multiple faults and expects kernel
+ * to process all of them. So read all valid CRB entries until find the
+ * invalid one. So use pswid which is pasted by NX and ccw[0] (reserved
+ * bit in BE) to check valid CRB. CCW[0] will not be touched by user
+ * space. Application gets CRB formt error if it updates this bit.
+ *
+ * Invalidate FIFO during allocation and process all entries from last
+ * successful read until finds invalid pswid and ccw[0] values.
+ * After reading each CRB entry from fault FIFO, the kernel invalidate
+ * it by updating pswid with FIFO_INVALID_ENTRY and CCW[0] with
+ * CCW0_INVALID.
+ */
+#define FIFO_INVALID_ENTRY	0xffffffff
+#define CCW0_INVALID		1
+
 /*
  * One per instance of VAS. Each instance will have a separate set of
  * receive windows, one per coprocessor type.
@@ -313,6 +327,15 @@ struct vas_instance {
 	u64 paste_base_addr;
 	u64 paste_win_id_shift;
 
+	u64 irq_port;
+	int virq;
+	int fault_crbs;
+	int fault_fifo_size;
+	int fifo_in_progress;	/* To wake up thread or return IRQ_HANDLED */
+	spinlock_t fault_lock;	/* Protects fifo_in_progress update */
+	void *fault_fifo;
+	struct vas_window *fault_win; /* Fault window */
+
 	struct mutex mutex;
 	struct vas_window *rxwin[VAS_COP_TYPE_MAX];
 	struct vas_window *windows[VAS_WINDOWS_PER_CHIP];
@@ -333,7 +356,9 @@ struct vas_window {
 	bool user_win;		/* True if user space window */
 	void *hvwc_map;		/* HV window context */
 	void *uwc_map;		/* OS/User window context */
-	pid_t pid;		/* Linux process id of owner */
+	struct pid *pid;	/* Linux process id of owner */
+	struct pid *tgid;	/* Thread group ID of owner */
+	struct mm_struct *mm;	/* Linux process mm_struct */
 	int wcreds_max;		/* Window credits */
 
 	char *dbgname;
@@ -406,6 +431,19 @@ extern void vas_init_dbgdir(void);
 extern void vas_instance_init_dbgdir(struct vas_instance *vinst);
 extern void vas_window_init_dbgdir(struct vas_window *win);
 extern void vas_window_free_dbgdir(struct vas_window *win);
+extern int vas_setup_fault_window(struct vas_instance *vinst);
+extern irqreturn_t vas_fault_thread_fn(int irq, void *data);
+extern irqreturn_t vas_fault_handler(int irq, void *dev_id);
+extern void vas_return_credit(struct vas_window *window, bool tx);
+extern struct vas_window *vas_pswid_to_window(struct vas_instance *vinst,
+						uint32_t pswid);
+extern void vas_win_paste_addr(struct vas_window *window, u64 *addr,
+					int *len);
+
+static inline int vas_window_pid(struct vas_window *window)
+{
+	return pid_vnr(window->pid);
+}
 
 static inline void vas_log_write(struct vas_window *win, char *name,
 			void *regptr, u64 val)
@@ -444,6 +482,21 @@ static inline u64 read_hvwc_reg(struct vas_window *win,
 	return in_be64(win->hvwc_map+reg);
 }
 
+/*
+ * Encode/decode the Partition Send Window ID (PSWID) for a window in
+ * a way that we can uniquely identify any window in the system. i.e.
+ * we should be able to locate the 'struct vas_window' given the PSWID.
+ *
+ *	Bits	Usage
+ *	0:7	VAS id (8 bits)
+ *	8:15	Unused, 0 (3 bits)
+ *	16:31	Window id (16 bits)
+ */
+static inline u32 encode_pswid(int vasid, int winid)
+{
+	return ((u32)winid | (vasid << (31 - 7)));
+}
+
 static inline void decode_pswid(u32 pswid, int *vasid, int *winid)
 {
 	if (vasid)
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index b2cde1732301..5ace2f9a277e 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -337,39 +337,19 @@ static int pseries_remove_mem_node(struct device_node *np)
 
 static bool lmb_is_removable(struct drmem_lmb *lmb)
 {
-	int i, scns_per_block;
-	bool rc = true;
-	unsigned long pfn, block_sz;
-	u64 phys_addr;
-
 	if (!(lmb->flags & DRCONF_MEM_ASSIGNED))
 		return false;
 
-	block_sz = memory_block_size_bytes();
-	scns_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE;
-	phys_addr = lmb->base_addr;
-
 #ifdef CONFIG_FA_DUMP
 	/*
 	 * Don't hot-remove memory that falls in fadump boot memory area
 	 * and memory that is reserved for capturing old kernel memory.
 	 */
-	if (is_fadump_memory_area(phys_addr, block_sz))
+	if (is_fadump_memory_area(lmb->base_addr, memory_block_size_bytes()))
 		return false;
 #endif
-
-	for (i = 0; i < scns_per_block; i++) {
-		pfn = PFN_DOWN(phys_addr);
-		if (!pfn_in_present_section(pfn)) {
-			phys_addr += MIN_MEMORY_BLOCK_SIZE;
-			continue;
-		}
-
-		rc = rc && is_mem_section_removable(pfn, PAGES_PER_SECTION);
-		phys_addr += MIN_MEMORY_BLOCK_SIZE;
-	}
-
-	return rc;
+	/* device_offline() will determine if we can actually remove this lmb */
+	return true;
 }
 
 static int dlpar_add_lmb(struct drmem_lmb *);
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index 5218fdc4b29a..71b881e554fc 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -280,12 +280,12 @@ static int xive_native_get_ipi(unsigned int cpu, struct xive_cpu *xc)
 }
 #endif /* CONFIG_SMP */
 
-u32 xive_native_alloc_irq(void)
+u32 xive_native_alloc_irq_on_chip(u32 chip_id)
 {
 	s64 rc;
 
 	for (;;) {
-		rc = opal_xive_allocate_irq(OPAL_XIVE_ANY_CHIP);
+		rc = opal_xive_allocate_irq(chip_id);
 		if (rc != OPAL_BUSY)
 			break;
 		msleep(OPAL_BUSY_DELAY_MS);
@@ -294,7 +294,7 @@ u32 xive_native_alloc_irq(void)
 		return 0;
 	return rc;
 }
-EXPORT_SYMBOL_GPL(xive_native_alloc_irq);
+EXPORT_SYMBOL_GPL(xive_native_alloc_irq_on_chip);
 
 void xive_native_free_irq(u32 irq)
 {
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 7af840c0fc93..64be69cb0b13 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -3136,6 +3136,7 @@ static void show_pte(unsigned long addr)
 	struct task_struct *tsk = NULL;
 	struct mm_struct *mm;
 	pgd_t *pgdp, *pgdir;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
@@ -3167,20 +3168,21 @@ static void show_pte(unsigned long addr)
 		pgdir = pgd_offset(mm, 0);
 	}
 
-	if (pgd_none(*pgdp)) {
-		printf("no linux page table for address\n");
+	p4dp = p4d_offset(pgdp, addr);
+
+	if (p4d_none(*p4dp)) {
+		printf("No valid P4D\n");
 		return;
 	}
 
-	printf("pgd  @ 0x%px\n", pgdir);
-
-	if (pgd_is_leaf(*pgdp)) {
-		format_pte(pgdp, pgd_val(*pgdp));
+	if (p4d_is_leaf(*p4dp)) {
+		format_pte(p4dp, p4d_val(*p4dp));
 		return;
 	}
-	printf("pgdp @ 0x%px = 0x%016lx\n", pgdp, pgd_val(*pgdp));
 
-	pudp = pud_offset(pgdp, addr);
+	printf("p4dp @ 0x%px = 0x%016lx\n", p4dp, p4d_val(*p4dp));
+
+	pudp = pud_offset(p4dp, addr);
 
 	if (pud_none(*pudp)) {
 		printf("No valid PUD\n");
diff --git a/arch/riscv/Kbuild b/arch/riscv/Kbuild
index d1d0aa70fdf1..4614c01ba5b3 100644
--- a/arch/riscv/Kbuild
+++ b/arch/riscv/Kbuild
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 obj-y += kernel/ mm/ net/
+obj-$(CONFIG_BUILTIN_DTB) += boot/dts/
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 62f7bfeb709e..78f30f2fdd51 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -32,7 +32,6 @@ config RISCV
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ASM_MODVERSIONS
-	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_PERF_EVENTS
@@ -60,7 +59,7 @@ config RISCV
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
-	select ARCH_HAS_STRICT_KERNEL_RWX
+	select ARCH_HAS_STRICT_KERNEL_RWX if MMU
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
 	select SPARSEMEM_STATIC if 32BIT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
@@ -68,6 +67,9 @@ config RISCV
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_ARCH_KASAN if MMU && 64BIT
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_KGDB_QXFER_PKT
+	select ARCH_HAS_DEBUG_WX
 
 config ARCH_MMAP_RND_BITS_MIN
 	default 18 if 64BIT
@@ -380,6 +382,11 @@ endchoice
 
 endmenu
 
+config BUILTIN_DTB
+	def_bool n
+	depends on RISCV_M_MODE
+	depends on OF
+
 menu "Power management options"
 
 source "kernel/power/Kconfig"
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 216286db81c9..4b2303ca20b9 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -23,11 +23,26 @@ config SOC_VIRT
 config SOC_KENDRYTE
 	bool "Kendryte K210 SoC"
 	depends on !MMU
-	select BUILTIN_DTB
 	select SERIAL_SIFIVE if TTY
 	select SERIAL_SIFIVE_CONSOLE if TTY
 	select SIFIVE_PLIC
 	help
 	  This enables support for Kendryte K210 SoC platform hardware.
 
+config SOC_KENDRYTE_K210_DTB
+	def_bool y
+	depends on SOC_KENDRYTE_K210_DTB_BUILTIN
+
+config SOC_KENDRYTE_K210_DTB_BUILTIN
+	bool "Builtin device tree for the Kendryte K210"
+	depends on SOC_KENDRYTE
+	default y
+	select OF
+	select BUILTIN_DTB
+	select SOC_KENDRYTE_K210_DTB
+	help
+	  Builds a device tree for the Kendryte K210 into the Linux image.
+	  This option should be selected if no bootloader is being used.
+	  If unsure, say Y.
+
 endmenu
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index 557f0b519c8e..ca1f8cbd78c0 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,3 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += sifive
 subdir-y += kendryte
+
+obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
diff --git a/arch/riscv/boot/dts/kendryte/Makefile b/arch/riscv/boot/dts/kendryte/Makefile
index 815444e69e89..1a88e616f18e 100644
--- a/arch/riscv/boot/dts/kendryte/Makefile
+++ b/arch/riscv/boot/dts/kendryte/Makefile
@@ -1,2 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_KENDRYTE) += k210.dtb
+dtb-$(CONFIG_SOC_KENDRYTE_K210_DTB) += k210.dtb
+
+obj-$(CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/riscv/configs/nommu_k210_defconfig b/arch/riscv/configs/nommu_k210_defconfig
index 632aa2f95e57..b48138e329ea 100644
--- a/arch/riscv/configs/nommu_k210_defconfig
+++ b/arch/riscv/configs/nommu_k210_defconfig
@@ -2,14 +2,12 @@
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_INITRAMFS_FORCE=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
 # CONFIG_RD_XZ is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
-# CONFIG_BOOT_CONFIG is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_FHANDLE is not set
@@ -35,8 +33,6 @@ CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_CMDLINE="earlycon console=ttySIF0"
 CONFIG_CMDLINE_FORCE=y
-CONFIG_USE_BUILTIN_DTB=y
-CONFIG_BUILTIN_DTB_SOURCE="kendryte/k210"
 # CONFIG_BLOCK is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set
@@ -49,8 +45,8 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_LDISC_AUTOLOAD is not set
-# CONFIG_DEVMEM is not set
 # CONFIG_HW_RANDOM is not set
+# CONFIG_DEVMEM is not set
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
@@ -62,6 +58,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_LSM="[]"
 CONFIG_PRINTK_TIME=y
 # CONFIG_DEBUG_MISC is not set
+CONFIG_PANIC_ON_OOPS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_RCU_TRACE is not set
 # CONFIG_FTRACE is not set
diff --git a/arch/riscv/include/asm/gdb_xml.h b/arch/riscv/include/asm/gdb_xml.h
new file mode 100644
index 000000000000..041b45f5b997
--- /dev/null
+++ b/arch/riscv/include/asm/gdb_xml.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_GDB_XML_H_
+#define __ASM_GDB_XML_H_
+
+#define kgdb_arch_gdb_stub_feature riscv_gdb_stub_feature
+static const char riscv_gdb_stub_feature[64] =
+			"PacketSize=800;qXfer:features:read+;";
+
+static const char gdb_xfer_read_target[31] = "qXfer:features:read:target.xml:";
+
+#ifdef CONFIG_64BIT
+static const char gdb_xfer_read_cpuxml[39] =
+			"qXfer:features:read:riscv-64bit-cpu.xml";
+
+static const char riscv_gdb_stub_target_desc[256] =
+"l<?xml version=\"1.0\"?>"
+"<!DOCTYPE target SYSTEM \"gdb-target.dtd\">"
+"<target>"
+"<xi:include href=\"riscv-64bit-cpu.xml\"/>"
+"</target>";
+
+static const char riscv_gdb_stub_cpuxml[2048] =
+"l<?xml version=\"1.0\"?>"
+"<!DOCTYPE feature SYSTEM \"gdb-target.dtd\">"
+"<feature name=\"org.gnu.gdb.riscv.cpu\">"
+"<reg name=\""DBG_REG_ZERO"\" bitsize=\"64\" type=\"int\" regnum=\"0\"/>"
+"<reg name=\""DBG_REG_RA"\" bitsize=\"64\" type=\"code_ptr\"/>"
+"<reg name=\""DBG_REG_SP"\" bitsize=\"64\" type=\"data_ptr\"/>"
+"<reg name=\""DBG_REG_GP"\" bitsize=\"64\" type=\"data_ptr\"/>"
+"<reg name=\""DBG_REG_TP"\" bitsize=\"64\" type=\"data_ptr\"/>"
+"<reg name=\""DBG_REG_T0"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T1"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T2"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_FP"\" bitsize=\"64\" type=\"data_ptr\"/>"
+"<reg name=\""DBG_REG_S1"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A0"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A1"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A2"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A3"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A4"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A5"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A6"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A7"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S2"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S3"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S4"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S5"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S6"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S7"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S8"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S9"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S10"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S11"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T3"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T4"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T5"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T6"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_EPC"\" bitsize=\"64\" type=\"code_ptr\"/>"
+"<reg name=\""DBG_REG_STATUS"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_BADADDR"\" bitsize=\"64\" type=\"int\"/>"
+"<reg name=\""DBG_REG_CAUSE"\" bitsize=\"64\" type=\"int\"/>"
+"</feature>";
+#else
+static const char gdb_xfer_read_cpuxml[39] =
+			"qXfer:features:read:riscv-32bit-cpu.xml";
+
+static const char riscv_gdb_stub_target_desc[256] =
+"l<?xml version=\"1.0\"?>"
+"<!DOCTYPE target SYSTEM \"gdb-target.dtd\">"
+"<target>"
+"<xi:include href=\"riscv-32bit-cpu.xml\"/>"
+"</target>";
+
+static const char riscv_gdb_stub_cpuxml[2048] =
+"l<?xml version=\"1.0\"?>"
+"<!DOCTYPE feature SYSTEM \"gdb-target.dtd\">"
+"<feature name=\"org.gnu.gdb.riscv.cpu\">"
+"<reg name=\""DBG_REG_ZERO"\" bitsize=\"32\" type=\"int\" regnum=\"0\"/>"
+"<reg name=\""DBG_REG_RA"\" bitsize=\"32\" type=\"code_ptr\"/>"
+"<reg name=\""DBG_REG_SP"\" bitsize=\"32\" type=\"data_ptr\"/>"
+"<reg name=\""DBG_REG_GP"\" bitsize=\"32\" type=\"data_ptr\"/>"
+"<reg name=\""DBG_REG_TP"\" bitsize=\"32\" type=\"data_ptr\"/>"
+"<reg name=\""DBG_REG_T0"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T1"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T2"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_FP"\" bitsize=\"32\" type=\"data_ptr\"/>"
+"<reg name=\""DBG_REG_S1"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A0"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A1"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A2"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A3"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A4"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A5"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A6"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_A7"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S2"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S3"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S4"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S5"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S6"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S7"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S8"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S9"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S10"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_S11"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T3"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T4"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T5"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_T6"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_EPC"\" bitsize=\"32\" type=\"code_ptr\"/>"
+"<reg name=\""DBG_REG_STATUS"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_BADADDR"\" bitsize=\"32\" type=\"int\"/>"
+"<reg name=\""DBG_REG_CAUSE"\" bitsize=\"32\" type=\"int\"/>"
+"</feature>";
+#endif
+#endif
diff --git a/arch/riscv/include/asm/kdebug.h b/arch/riscv/include/asm/kdebug.h
new file mode 100644
index 000000000000..85ac00411f6e
--- /dev/null
+++ b/arch/riscv/include/asm/kdebug.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_KDEBUG_H
+#define _ASM_ARC_KDEBUG_H
+
+enum die_val {
+	DIE_UNUSED,
+	DIE_TRAP,
+	DIE_OOPS
+};
+
+#endif
diff --git a/arch/riscv/include/asm/kgdb.h b/arch/riscv/include/asm/kgdb.h
new file mode 100644
index 000000000000..8177a457caff
--- /dev/null
+++ b/arch/riscv/include/asm/kgdb.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#define GDB_SIZEOF_REG sizeof(unsigned long)
+
+#define DBG_MAX_REG_NUM (36)
+#define NUMREGBYTES ((DBG_MAX_REG_NUM) * GDB_SIZEOF_REG)
+#define CACHE_FLUSH_IS_SAFE     1
+#define BUFMAX                  2048
+#ifdef CONFIG_RISCV_ISA_C
+#define BREAK_INSTR_SIZE	2
+#else
+#define BREAK_INSTR_SIZE	4
+#endif
+
+#ifndef	__ASSEMBLY__
+
+extern int kgdb_has_hit_break(unsigned long addr);
+extern unsigned long kgdb_compiled_break;
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".global kgdb_compiled_break\n"
+	    ".option norvc\n"
+	    "kgdb_compiled_break: ebreak\n"
+	    ".option rvc\n");
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#define DBG_REG_ZERO "zero"
+#define DBG_REG_RA "ra"
+#define DBG_REG_SP "sp"
+#define DBG_REG_GP "gp"
+#define DBG_REG_TP "tp"
+#define DBG_REG_T0 "t0"
+#define DBG_REG_T1 "t1"
+#define DBG_REG_T2 "t2"
+#define DBG_REG_FP "fp"
+#define DBG_REG_S1 "s1"
+#define DBG_REG_A0 "a0"
+#define DBG_REG_A1 "a1"
+#define DBG_REG_A2 "a2"
+#define DBG_REG_A3 "a3"
+#define DBG_REG_A4 "a4"
+#define DBG_REG_A5 "a5"
+#define DBG_REG_A6 "a6"
+#define DBG_REG_A7 "a7"
+#define DBG_REG_S2 "s2"
+#define DBG_REG_S3 "s3"
+#define DBG_REG_S4 "s4"
+#define DBG_REG_S5 "s5"
+#define DBG_REG_S6 "s6"
+#define DBG_REG_S7 "s7"
+#define DBG_REG_S8 "s8"
+#define DBG_REG_S9 "s9"
+#define DBG_REG_S10 "s10"
+#define DBG_REG_S11 "s11"
+#define DBG_REG_T3 "t3"
+#define DBG_REG_T4 "t4"
+#define DBG_REG_T5 "t5"
+#define DBG_REG_T6 "t6"
+#define DBG_REG_EPC "pc"
+#define DBG_REG_STATUS "sstatus"
+#define DBG_REG_BADADDR "stval"
+#define DBG_REG_CAUSE "scause"
+
+#define DBG_REG_ZERO_OFF 0
+#define DBG_REG_RA_OFF 1
+#define DBG_REG_SP_OFF 2
+#define DBG_REG_GP_OFF 3
+#define DBG_REG_TP_OFF 4
+#define DBG_REG_T0_OFF 5
+#define DBG_REG_T1_OFF 6
+#define DBG_REG_T2_OFF 7
+#define DBG_REG_FP_OFF 8
+#define DBG_REG_S1_OFF 9
+#define DBG_REG_A0_OFF 10
+#define DBG_REG_A1_OFF 11
+#define DBG_REG_A2_OFF 12
+#define DBG_REG_A3_OFF 13
+#define DBG_REG_A4_OFF 14
+#define DBG_REG_A5_OFF 15
+#define DBG_REG_A6_OFF 16
+#define DBG_REG_A7_OFF 17
+#define DBG_REG_S2_OFF 18
+#define DBG_REG_S3_OFF 19
+#define DBG_REG_S4_OFF 20
+#define DBG_REG_S5_OFF 21
+#define DBG_REG_S6_OFF 22
+#define DBG_REG_S7_OFF 23
+#define DBG_REG_S8_OFF 24
+#define DBG_REG_S9_OFF 25
+#define DBG_REG_S10_OFF 26
+#define DBG_REG_S11_OFF 27
+#define DBG_REG_T3_OFF 28
+#define DBG_REG_T4_OFF 29
+#define DBG_REG_T5_OFF 30
+#define DBG_REG_T6_OFF 31
+#define DBG_REG_EPC_OFF 32
+#define DBG_REG_STATUS_OFF 33
+#define DBG_REG_BADADDR_OFF 34
+#define DBG_REG_CAUSE_OFF 35
+
+#include <asm/gdb_xml.h>
+
+#endif
+#endif
diff --git a/arch/riscv/include/asm/parse_asm.h b/arch/riscv/include/asm/parse_asm.h
new file mode 100644
index 000000000000..f36368de839f
--- /dev/null
+++ b/arch/riscv/include/asm/parse_asm.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 SiFive
+ */
+
+#include <linux/bits.h>
+
+/* The bit field of immediate value in I-type instruction */
+#define I_IMM_SIGN_OPOFF	31
+#define I_IMM_11_0_OPOFF	20
+#define I_IMM_SIGN_OFF		12
+#define I_IMM_11_0_OFF		0
+#define I_IMM_11_0_MASK		GENMASK(11, 0)
+
+/* The bit field of immediate value in J-type instruction */
+#define J_IMM_SIGN_OPOFF	31
+#define J_IMM_10_1_OPOFF	21
+#define J_IMM_11_OPOFF		20
+#define J_IMM_19_12_OPOFF	12
+#define J_IMM_SIGN_OFF		20
+#define J_IMM_10_1_OFF		1
+#define J_IMM_11_OFF		11
+#define J_IMM_19_12_OFF		12
+#define J_IMM_10_1_MASK		GENMASK(9, 0)
+#define J_IMM_11_MASK		GENMASK(0, 0)
+#define J_IMM_19_12_MASK	GENMASK(7, 0)
+
+/* The bit field of immediate value in B-type instruction */
+#define B_IMM_SIGN_OPOFF	31
+#define B_IMM_10_5_OPOFF	25
+#define B_IMM_4_1_OPOFF		8
+#define B_IMM_11_OPOFF		7
+#define B_IMM_SIGN_OFF		12
+#define B_IMM_10_5_OFF		5
+#define B_IMM_4_1_OFF		1
+#define B_IMM_11_OFF		11
+#define B_IMM_10_5_MASK		GENMASK(5, 0)
+#define B_IMM_4_1_MASK		GENMASK(3, 0)
+#define B_IMM_11_MASK		GENMASK(0, 0)
+
+/* The register offset in RVG instruction */
+#define RVG_RS1_OPOFF		15
+#define RVG_RS2_OPOFF		20
+#define RVG_RD_OPOFF		7
+
+/* The bit field of immediate value in RVC J instruction */
+#define RVC_J_IMM_SIGN_OPOFF	12
+#define RVC_J_IMM_4_OPOFF	11
+#define RVC_J_IMM_9_8_OPOFF	9
+#define RVC_J_IMM_10_OPOFF	8
+#define RVC_J_IMM_6_OPOFF	7
+#define RVC_J_IMM_7_OPOFF	6
+#define RVC_J_IMM_3_1_OPOFF	3
+#define RVC_J_IMM_5_OPOFF	2
+#define RVC_J_IMM_SIGN_OFF	11
+#define RVC_J_IMM_4_OFF		4
+#define RVC_J_IMM_9_8_OFF	8
+#define RVC_J_IMM_10_OFF	10
+#define RVC_J_IMM_6_OFF		6
+#define RVC_J_IMM_7_OFF		7
+#define RVC_J_IMM_3_1_OFF	1
+#define RVC_J_IMM_5_OFF		5
+#define RVC_J_IMM_4_MASK	GENMASK(0, 0)
+#define RVC_J_IMM_9_8_MASK	GENMASK(1, 0)
+#define RVC_J_IMM_10_MASK	GENMASK(0, 0)
+#define RVC_J_IMM_6_MASK	GENMASK(0, 0)
+#define RVC_J_IMM_7_MASK	GENMASK(0, 0)
+#define RVC_J_IMM_3_1_MASK	GENMASK(2, 0)
+#define RVC_J_IMM_5_MASK	GENMASK(0, 0)
+
+/* The bit field of immediate value in RVC B instruction */
+#define RVC_B_IMM_SIGN_OPOFF	12
+#define RVC_B_IMM_4_3_OPOFF	10
+#define RVC_B_IMM_7_6_OPOFF	5
+#define RVC_B_IMM_2_1_OPOFF	3
+#define RVC_B_IMM_5_OPOFF	2
+#define RVC_B_IMM_SIGN_OFF	8
+#define RVC_B_IMM_4_3_OFF	3
+#define RVC_B_IMM_7_6_OFF	6
+#define RVC_B_IMM_2_1_OFF	1
+#define RVC_B_IMM_5_OFF		5
+#define RVC_B_IMM_4_3_MASK	GENMASK(1, 0)
+#define RVC_B_IMM_7_6_MASK	GENMASK(1, 0)
+#define RVC_B_IMM_2_1_MASK	GENMASK(1, 0)
+#define RVC_B_IMM_5_MASK	GENMASK(0, 0)
+
+/* The register offset in RVC op=C0 instruction */
+#define RVC_C0_RS1_OPOFF	7
+#define RVC_C0_RS2_OPOFF	2
+#define RVC_C0_RD_OPOFF		2
+
+/* The register offset in RVC op=C1 instruction */
+#define RVC_C1_RS1_OPOFF	7
+#define RVC_C1_RS2_OPOFF	2
+#define RVC_C1_RD_OPOFF		7
+
+/* The register offset in RVC op=C2 instruction */
+#define RVC_C2_RS1_OPOFF	7
+#define RVC_C2_RS2_OPOFF	2
+#define RVC_C2_RD_OPOFF		7
+
+/* parts of opcode for RVG*/
+#define OPCODE_BRANCH		0x63
+#define OPCODE_JALR		0x67
+#define OPCODE_JAL		0x6f
+#define OPCODE_SYSTEM		0x73
+
+/* parts of opcode for RVC*/
+#define OPCODE_C_0		0x0
+#define OPCODE_C_1		0x1
+#define OPCODE_C_2		0x2
+
+/* parts of funct3 code for I, M, A extension*/
+#define FUNCT3_JALR		0x0
+#define FUNCT3_BEQ		0x0
+#define FUNCT3_BNE		0x1000
+#define FUNCT3_BLT		0x4000
+#define FUNCT3_BGE		0x5000
+#define FUNCT3_BLTU		0x6000
+#define FUNCT3_BGEU		0x7000
+
+/* parts of funct3 code for C extension*/
+#define FUNCT3_C_BEQZ		0xc000
+#define FUNCT3_C_BNEZ		0xe000
+#define FUNCT3_C_J		0xa000
+#define FUNCT3_C_JAL		0x2000
+#define FUNCT4_C_JR		0x8000
+#define FUNCT4_C_JALR		0xf000
+
+#define FUNCT12_SRET		0x10200000
+
+#define MATCH_JALR		(FUNCT3_JALR | OPCODE_JALR)
+#define MATCH_JAL		(OPCODE_JAL)
+#define MATCH_BEQ		(FUNCT3_BEQ | OPCODE_BRANCH)
+#define MATCH_BNE		(FUNCT3_BNE | OPCODE_BRANCH)
+#define MATCH_BLT		(FUNCT3_BLT | OPCODE_BRANCH)
+#define MATCH_BGE		(FUNCT3_BGE | OPCODE_BRANCH)
+#define MATCH_BLTU		(FUNCT3_BLTU | OPCODE_BRANCH)
+#define MATCH_BGEU		(FUNCT3_BGEU | OPCODE_BRANCH)
+#define MATCH_SRET		(FUNCT12_SRET | OPCODE_SYSTEM)
+#define MATCH_C_BEQZ		(FUNCT3_C_BEQZ | OPCODE_C_1)
+#define MATCH_C_BNEZ		(FUNCT3_C_BNEZ | OPCODE_C_1)
+#define MATCH_C_J		(FUNCT3_C_J | OPCODE_C_1)
+#define MATCH_C_JAL		(FUNCT3_C_JAL | OPCODE_C_1)
+#define MATCH_C_JR		(FUNCT4_C_JR | OPCODE_C_2)
+#define MATCH_C_JALR		(FUNCT4_C_JALR | OPCODE_C_2)
+
+#define MASK_JALR		0x707f
+#define MASK_JAL		0x7f
+#define MASK_C_JALR		0xf07f
+#define MASK_C_JR		0xf07f
+#define MASK_C_JAL		0xe003
+#define MASK_C_J		0xe003
+#define MASK_BEQ		0x707f
+#define MASK_BNE		0x707f
+#define MASK_BLT		0x707f
+#define MASK_BGE		0x707f
+#define MASK_BLTU		0x707f
+#define MASK_BGEU		0x707f
+#define MASK_C_BEQZ		0xe003
+#define MASK_C_BNEZ		0xe003
+#define MASK_SRET		0xffffffff
+
+#define __INSN_LENGTH_MASK	_UL(0x3)
+#define __INSN_LENGTH_GE_32	_UL(0x3)
+#define __INSN_OPCODE_MASK	_UL(0x7F)
+#define __INSN_BRANCH_OPCODE	_UL(OPCODE_BRANCH)
+
+/* Define a series of is_XXX_insn functions to check if the value INSN
+ * is an instance of instruction XXX.
+ */
+#define DECLARE_INSN(INSN_NAME, INSN_MATCH, INSN_MASK) \
+static inline bool is_ ## INSN_NAME ## _insn(long insn) \
+{ \
+	return (insn & (INSN_MASK)) == (INSN_MATCH); \
+}
+
+#define RV_IMM_SIGN(x) (-(((x) >> 31) & 1))
+#define RVC_IMM_SIGN(x) (-(((x) >> 12) & 1))
+#define RV_X(X, s, mask)  (((X) >> (s)) & (mask))
+#define RVC_X(X, s, mask) RV_X(X, s, mask)
+
+#define EXTRACT_JTYPE_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RV_X(x_, J_IMM_10_1_OPOFF, J_IMM_10_1_MASK) << J_IMM_10_1_OFF) | \
+	(RV_X(x_, J_IMM_11_OPOFF, J_IMM_11_MASK) << J_IMM_11_OFF) | \
+	(RV_X(x_, J_IMM_19_12_OPOFF, J_IMM_19_12_MASK) << J_IMM_19_12_OFF) | \
+	(RV_IMM_SIGN(x_) << J_IMM_SIGN_OFF); })
+
+#define EXTRACT_ITYPE_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RV_X(x_, I_IMM_11_0_OPOFF, I_IMM_11_0_MASK)) | \
+	(RV_IMM_SIGN(x_) << I_IMM_SIGN_OFF); })
+
+#define EXTRACT_BTYPE_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RV_X(x_, B_IMM_4_1_OPOFF, B_IMM_4_1_MASK) << B_IMM_4_1_OFF) | \
+	(RV_X(x_, B_IMM_10_5_OPOFF, B_IMM_10_5_MASK) << B_IMM_10_5_OFF) | \
+	(RV_X(x_, B_IMM_11_OPOFF, B_IMM_11_MASK) << B_IMM_11_OFF) | \
+	(RV_IMM_SIGN(x_) << B_IMM_SIGN_OFF); })
+
+#define EXTRACT_RVC_J_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RVC_X(x_, RVC_J_IMM_3_1_OPOFF, RVC_J_IMM_3_1_MASK) << RVC_J_IMM_3_1_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_4_OPOFF, RVC_J_IMM_4_MASK) << RVC_J_IMM_4_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_5_OPOFF, RVC_J_IMM_5_MASK) << RVC_J_IMM_5_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_6_OPOFF, RVC_J_IMM_6_MASK) << RVC_J_IMM_6_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_7_OPOFF, RVC_J_IMM_7_MASK) << RVC_J_IMM_7_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_9_8_OPOFF, RVC_J_IMM_9_8_MASK) << RVC_J_IMM_9_8_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_10_OPOFF, RVC_J_IMM_10_MASK) << RVC_J_IMM_10_OFF) | \
+	(RVC_IMM_SIGN(x_) << RVC_J_IMM_SIGN_OFF); })
+
+#define EXTRACT_RVC_B_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RVC_X(x_, RVC_B_IMM_2_1_OPOFF, RVC_B_IMM_2_1_MASK) << RVC_B_IMM_2_1_OFF) | \
+	(RVC_X(x_, RVC_B_IMM_4_3_OPOFF, RVC_B_IMM_4_3_MASK) << RVC_B_IMM_4_3_OFF) | \
+	(RVC_X(x_, RVC_B_IMM_5_OPOFF, RVC_B_IMM_5_MASK) << RVC_B_IMM_5_OFF) | \
+	(RVC_X(x_, RVC_B_IMM_7_6_OPOFF, RVC_B_IMM_7_6_MASK) << RVC_B_IMM_7_6_OFF) | \
+	(RVC_IMM_SIGN(x_) << RVC_B_IMM_SIGN_OFF); })
diff --git a/arch/riscv/include/asm/patch.h b/arch/riscv/include/asm/patch.h
index b5918a6e0615..9a7d7346001e 100644
--- a/arch/riscv/include/asm/patch.h
+++ b/arch/riscv/include/asm/patch.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_RISCV_PATCH_H
 #define _ASM_RISCV_PATCH_H
 
-int riscv_patch_text_nosync(void *addr, const void *insns, size_t len);
-int riscv_patch_text(void *addr, u32 insn);
+int patch_text_nosync(void *addr, const void *insns, size_t len);
+int patch_text(void *addr, u32 insn);
 
 #endif /* _ASM_RISCV_PATCH_H */
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 9c188ad2e52d..780dd1d4f720 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -472,9 +472,9 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
 
 #define PAGE_KERNEL		__pgprot(0)
 #define swapper_pg_dir		NULL
+#define TASK_SIZE		0xffffffffUL
 #define VMALLOC_START		0
-
-#define TASK_SIZE 0xffffffffUL
+#define VMALLOC_END		TASK_SIZE
 
 #endif /* !CONFIG_MMU */
 
diff --git a/arch/riscv/include/asm/ptdump.h b/arch/riscv/include/asm/ptdump.h
index e29af7191909..3c9ea6dd5af7 100644
--- a/arch/riscv/include/asm/ptdump.h
+++ b/arch/riscv/include/asm/ptdump.h
@@ -8,4 +8,15 @@
 
 void ptdump_check_wx(void);
 
+#ifdef CONFIG_DEBUG_WX
+static inline void debug_checkwx(void)
+{
+	ptdump_check_wx();
+}
+#else
+static inline void debug_checkwx(void)
+{
+}
+#endif
+
 #endif /* _ASM_RISCV_PTDUMP_H */
diff --git a/arch/riscv/include/asm/soc.h b/arch/riscv/include/asm/soc.h
index 7cec1968c8b4..136a442ef876 100644
--- a/arch/riscv/include/asm/soc.h
+++ b/arch/riscv/include/asm/soc.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2020 Google, Inc
  */
 
 #ifndef _ASM_RISCV_SOC_H
@@ -20,4 +21,42 @@ void soc_early_init(void);
 extern unsigned long __soc_early_init_table_start;
 extern unsigned long __soc_early_init_table_end;
 
+/*
+ * Allows Linux to provide a device tree, which is necessary for SOCs that
+ * don't provide a useful one on their own.
+ */
+struct soc_builtin_dtb {
+	unsigned long vendor_id;
+	unsigned long arch_id;
+	unsigned long imp_id;
+	void *(*dtb_func)(void);
+};
+
+/*
+ * The argument name must specify a valid DTS file name without the dts
+ * extension.
+ */
+#define SOC_BUILTIN_DTB_DECLARE(name, vendor, arch, impl)		\
+	extern void *__dtb_##name##_begin;				\
+									\
+	static __init __used						\
+	void *__soc_builtin_dtb_f__##name(void)				\
+	{								\
+		return (void *)&__dtb_##name##_begin;			\
+	}								\
+									\
+	static const struct soc_builtin_dtb __soc_builtin_dtb__##name	\
+		__used __section(__soc_builtin_dtb_table) =		\
+	{								\
+		.vendor_id = vendor,					\
+		.arch_id   = arch,					\
+		.imp_id    = impl,					\
+		.dtb_func  = __soc_builtin_dtb_f__##name,		\
+	}
+
+extern unsigned long __soc_builtin_dtb_table_start;
+extern unsigned long __soc_builtin_dtb_table_end;
+
+void *soc_lookup_builtin_dtb(void);
+
 #endif
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 86c83081044f..1f5736e996fd 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -51,5 +51,6 @@ ifeq ($(CONFIG_RISCV_SBI), y)
 obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 
 clean:
diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
index ce69b34ff55d..08396614d6f4 100644
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -7,10 +7,23 @@
 
 #include <linux/ftrace.h>
 #include <linux/uaccess.h>
+#include <linux/memory.h>
 #include <asm/cacheflush.h>
 #include <asm/patch.h>
 
 #ifdef CONFIG_DYNAMIC_FTRACE
+int ftrace_arch_code_modify_prepare(void) __acquires(&text_mutex)
+{
+	mutex_lock(&text_mutex);
+	return 0;
+}
+
+int ftrace_arch_code_modify_post_process(void) __releases(&text_mutex)
+{
+	mutex_unlock(&text_mutex);
+	return 0;
+}
+
 static int ftrace_check_current_call(unsigned long hook_pos,
 				     unsigned int *expected)
 {
@@ -51,7 +64,7 @@ static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
 	make_call(hook_pos, target, call);
 
 	/* Replace the auipc-jalr pair at once. Return -EPERM on write error. */
-	if (riscv_patch_text_nosync
+	if (patch_text_nosync
 	    ((void *)hook_pos, enable ? call : nops, MCOUNT_INSN_SIZE))
 		return -EPERM;
 
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 98a406474e7d..7ed1b22950fd 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -161,11 +161,20 @@ ENTRY(_start_kernel)
 	/* Reset all registers except ra, a0, a1 */
 	call reset_regs
 
-	/* Setup a PMP to permit access to all of memory. */
+	/*
+	 * Setup a PMP to permit access to all of memory.  Some machines may
+	 * not implement PMPs, so we set up a quick trap handler to just skip
+	 * touching the PMPs on any trap.
+	 */
+	la a0, pmp_done
+	csrw CSR_TVEC, a0
+
 	li a0, -1
 	csrw CSR_PMPADDR0, a0
 	li a0, (PMP_A_NAPOT | PMP_R | PMP_W | PMP_X)
 	csrw CSR_PMPCFG0, a0
+.align 2
+pmp_done:
 
 	/*
 	 * The hartid in a0 is expected later on, and we have no firmware
diff --git a/arch/riscv/kernel/kgdb.c b/arch/riscv/kernel/kgdb.c
new file mode 100644
index 000000000000..f16ade84a11f
--- /dev/null
+++ b/arch/riscv/kernel/kgdb.c
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 SiFive
+ */
+
+#include <linux/ptrace.h>
+#include <linux/kdebug.h>
+#include <linux/bug.h>
+#include <linux/kgdb.h>
+#include <linux/irqflags.h>
+#include <linux/string.h>
+#include <asm/cacheflush.h>
+#include <asm/gdb_xml.h>
+#include <asm/parse_asm.h>
+
+enum {
+	NOT_KGDB_BREAK = 0,
+	KGDB_SW_BREAK,
+	KGDB_COMPILED_BREAK,
+	KGDB_SW_SINGLE_STEP
+};
+
+static unsigned long stepped_address;
+static unsigned int stepped_opcode;
+
+#if __riscv_xlen == 32
+/* C.JAL is an RV32C-only instruction */
+DECLARE_INSN(c_jal, MATCH_C_JAL, MASK_C_JAL)
+#else
+#define is_c_jal_insn(opcode) 0
+#endif
+DECLARE_INSN(jalr, MATCH_JALR, MASK_JALR)
+DECLARE_INSN(jal, MATCH_JAL, MASK_JAL)
+DECLARE_INSN(c_jr, MATCH_C_JR, MASK_C_JR)
+DECLARE_INSN(c_jalr, MATCH_C_JALR, MASK_C_JALR)
+DECLARE_INSN(c_j, MATCH_C_J, MASK_C_J)
+DECLARE_INSN(beq, MATCH_BEQ, MASK_BEQ)
+DECLARE_INSN(bne, MATCH_BNE, MASK_BNE)
+DECLARE_INSN(blt, MATCH_BLT, MASK_BLT)
+DECLARE_INSN(bge, MATCH_BGE, MASK_BGE)
+DECLARE_INSN(bltu, MATCH_BLTU, MASK_BLTU)
+DECLARE_INSN(bgeu, MATCH_BGEU, MASK_BGEU)
+DECLARE_INSN(c_beqz, MATCH_C_BEQZ, MASK_C_BEQZ)
+DECLARE_INSN(c_bnez, MATCH_C_BNEZ, MASK_C_BNEZ)
+DECLARE_INSN(sret, MATCH_SRET, MASK_SRET)
+
+int decode_register_index(unsigned long opcode, int offset)
+{
+	return (opcode >> offset) & 0x1F;
+}
+
+int decode_register_index_short(unsigned long opcode, int offset)
+{
+	return ((opcode >> offset) & 0x7) + 8;
+}
+
+/* Calculate the new address for after a step */
+int get_step_address(struct pt_regs *regs, unsigned long *next_addr)
+{
+	unsigned long pc = regs->epc;
+	unsigned long *regs_ptr = (unsigned long *)regs;
+	unsigned int rs1_num, rs2_num;
+	int op_code;
+
+	if (probe_kernel_address((void *)pc, op_code))
+		return -EINVAL;
+	if ((op_code & __INSN_LENGTH_MASK) != __INSN_LENGTH_GE_32) {
+		if (is_c_jalr_insn(op_code) || is_c_jr_insn(op_code)) {
+			rs1_num = decode_register_index(op_code, RVC_C2_RS1_OPOFF);
+			*next_addr = regs_ptr[rs1_num];
+		} else if (is_c_j_insn(op_code) || is_c_jal_insn(op_code)) {
+			*next_addr = EXTRACT_RVC_J_IMM(op_code) + pc;
+		} else if (is_c_beqz_insn(op_code)) {
+			rs1_num = decode_register_index_short(op_code,
+							      RVC_C1_RS1_OPOFF);
+			if (!rs1_num || regs_ptr[rs1_num] == 0)
+				*next_addr = EXTRACT_RVC_B_IMM(op_code) + pc;
+			else
+				*next_addr = pc + 2;
+		} else if (is_c_bnez_insn(op_code)) {
+			rs1_num =
+			    decode_register_index_short(op_code, RVC_C1_RS1_OPOFF);
+			if (rs1_num && regs_ptr[rs1_num] != 0)
+				*next_addr = EXTRACT_RVC_B_IMM(op_code) + pc;
+			else
+				*next_addr = pc + 2;
+		} else {
+			*next_addr = pc + 2;
+		}
+	} else {
+		if ((op_code & __INSN_OPCODE_MASK) == __INSN_BRANCH_OPCODE) {
+			bool result = false;
+			long imm = EXTRACT_BTYPE_IMM(op_code);
+			unsigned long rs1_val = 0, rs2_val = 0;
+
+			rs1_num = decode_register_index(op_code, RVG_RS1_OPOFF);
+			rs2_num = decode_register_index(op_code, RVG_RS2_OPOFF);
+			if (rs1_num)
+				rs1_val = regs_ptr[rs1_num];
+			if (rs2_num)
+				rs2_val = regs_ptr[rs2_num];
+
+			if (is_beq_insn(op_code))
+				result = (rs1_val == rs2_val) ? true : false;
+			else if (is_bne_insn(op_code))
+				result = (rs1_val != rs2_val) ? true : false;
+			else if (is_blt_insn(op_code))
+				result =
+				    ((long)rs1_val <
+				     (long)rs2_val) ? true : false;
+			else if (is_bge_insn(op_code))
+				result =
+				    ((long)rs1_val >=
+				     (long)rs2_val) ? true : false;
+			else if (is_bltu_insn(op_code))
+				result = (rs1_val < rs2_val) ? true : false;
+			else if (is_bgeu_insn(op_code))
+				result = (rs1_val >= rs2_val) ? true : false;
+			if (result)
+				*next_addr = imm + pc;
+			else
+				*next_addr = pc + 4;
+		} else if (is_jal_insn(op_code)) {
+			*next_addr = EXTRACT_JTYPE_IMM(op_code) + pc;
+		} else if (is_jalr_insn(op_code)) {
+			rs1_num = decode_register_index(op_code, RVG_RS1_OPOFF);
+			if (rs1_num)
+				*next_addr = ((unsigned long *)regs)[rs1_num];
+			*next_addr += EXTRACT_ITYPE_IMM(op_code);
+		} else if (is_sret_insn(op_code)) {
+			*next_addr = pc;
+		} else {
+			*next_addr = pc + 4;
+		}
+	}
+	return 0;
+}
+
+int do_single_step(struct pt_regs *regs)
+{
+	/* Determine where the target instruction will send us to */
+	unsigned long addr = 0;
+	int error = get_step_address(regs, &addr);
+
+	if (error)
+		return error;
+
+	/* Store the op code in the stepped address */
+	error = probe_kernel_address((void *)addr, stepped_opcode);
+	if (error)
+		return error;
+
+	stepped_address = addr;
+
+	/* Replace the op code with the break instruction */
+	error = probe_kernel_write((void *)stepped_address,
+				   arch_kgdb_ops.gdb_bpt_instr,
+				   BREAK_INSTR_SIZE);
+	/* Flush and return */
+	if (!error) {
+		flush_icache_range(addr, addr + BREAK_INSTR_SIZE);
+		kgdb_single_step = 1;
+		atomic_set(&kgdb_cpu_doing_single_step,
+			   raw_smp_processor_id());
+	} else {
+		stepped_address = 0;
+		stepped_opcode = 0;
+	}
+	return error;
+}
+
+/* Undo a single step */
+static void undo_single_step(struct pt_regs *regs)
+{
+	if (stepped_opcode != 0) {
+		probe_kernel_write((void *)stepped_address,
+				   (void *)&stepped_opcode, BREAK_INSTR_SIZE);
+		flush_icache_range(stepped_address,
+				   stepped_address + BREAK_INSTR_SIZE);
+	}
+	stepped_address = 0;
+	stepped_opcode = 0;
+	kgdb_single_step = 0;
+	atomic_set(&kgdb_cpu_doing_single_step, -1);
+}
+
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
+	{DBG_REG_ZERO, GDB_SIZEOF_REG, -1},
+	{DBG_REG_RA, GDB_SIZEOF_REG, offsetof(struct pt_regs, ra)},
+	{DBG_REG_SP, GDB_SIZEOF_REG, offsetof(struct pt_regs, sp)},
+	{DBG_REG_GP, GDB_SIZEOF_REG, offsetof(struct pt_regs, gp)},
+	{DBG_REG_TP, GDB_SIZEOF_REG, offsetof(struct pt_regs, tp)},
+	{DBG_REG_T0, GDB_SIZEOF_REG, offsetof(struct pt_regs, t0)},
+	{DBG_REG_T1, GDB_SIZEOF_REG, offsetof(struct pt_regs, t1)},
+	{DBG_REG_T2, GDB_SIZEOF_REG, offsetof(struct pt_regs, t2)},
+	{DBG_REG_FP, GDB_SIZEOF_REG, offsetof(struct pt_regs, s0)},
+	{DBG_REG_S1, GDB_SIZEOF_REG, offsetof(struct pt_regs, a1)},
+	{DBG_REG_A0, GDB_SIZEOF_REG, offsetof(struct pt_regs, a0)},
+	{DBG_REG_A1, GDB_SIZEOF_REG, offsetof(struct pt_regs, a1)},
+	{DBG_REG_A2, GDB_SIZEOF_REG, offsetof(struct pt_regs, a2)},
+	{DBG_REG_A3, GDB_SIZEOF_REG, offsetof(struct pt_regs, a3)},
+	{DBG_REG_A4, GDB_SIZEOF_REG, offsetof(struct pt_regs, a4)},
+	{DBG_REG_A5, GDB_SIZEOF_REG, offsetof(struct pt_regs, a5)},
+	{DBG_REG_A6, GDB_SIZEOF_REG, offsetof(struct pt_regs, a6)},
+	{DBG_REG_A7, GDB_SIZEOF_REG, offsetof(struct pt_regs, a7)},
+	{DBG_REG_S2, GDB_SIZEOF_REG, offsetof(struct pt_regs, s2)},
+	{DBG_REG_S3, GDB_SIZEOF_REG, offsetof(struct pt_regs, s3)},
+	{DBG_REG_S4, GDB_SIZEOF_REG, offsetof(struct pt_regs, s4)},
+	{DBG_REG_S5, GDB_SIZEOF_REG, offsetof(struct pt_regs, s5)},
+	{DBG_REG_S6, GDB_SIZEOF_REG, offsetof(struct pt_regs, s6)},
+	{DBG_REG_S7, GDB_SIZEOF_REG, offsetof(struct pt_regs, s7)},
+	{DBG_REG_S8, GDB_SIZEOF_REG, offsetof(struct pt_regs, s8)},
+	{DBG_REG_S9, GDB_SIZEOF_REG, offsetof(struct pt_regs, s9)},
+	{DBG_REG_S10, GDB_SIZEOF_REG, offsetof(struct pt_regs, s10)},
+	{DBG_REG_S11, GDB_SIZEOF_REG, offsetof(struct pt_regs, s11)},
+	{DBG_REG_T3, GDB_SIZEOF_REG, offsetof(struct pt_regs, t3)},
+	{DBG_REG_T4, GDB_SIZEOF_REG, offsetof(struct pt_regs, t4)},
+	{DBG_REG_T5, GDB_SIZEOF_REG, offsetof(struct pt_regs, t5)},
+	{DBG_REG_T6, GDB_SIZEOF_REG, offsetof(struct pt_regs, t6)},
+	{DBG_REG_EPC, GDB_SIZEOF_REG, offsetof(struct pt_regs, epc)},
+	{DBG_REG_STATUS, GDB_SIZEOF_REG, offsetof(struct pt_regs, status)},
+	{DBG_REG_BADADDR, GDB_SIZEOF_REG, offsetof(struct pt_regs, badaddr)},
+	{DBG_REG_CAUSE, GDB_SIZEOF_REG, offsetof(struct pt_regs, cause)},
+};
+
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+		       dbg_reg_def[regno].size);
+	else
+		memset(mem, 0, dbg_reg_def[regno].size);
+	return dbg_reg_def[regno].name;
+}
+
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return -EINVAL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+	return 0;
+}
+
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+	/* Initialize to zero */
+	memset((char *)gdb_regs, 0, NUMREGBYTES);
+
+	gdb_regs[DBG_REG_SP_OFF] = task->thread.sp;
+	gdb_regs[DBG_REG_FP_OFF] = task->thread.s[0];
+	gdb_regs[DBG_REG_S1_OFF] = task->thread.s[1];
+	gdb_regs[DBG_REG_S2_OFF] = task->thread.s[2];
+	gdb_regs[DBG_REG_S3_OFF] = task->thread.s[3];
+	gdb_regs[DBG_REG_S4_OFF] = task->thread.s[4];
+	gdb_regs[DBG_REG_S5_OFF] = task->thread.s[5];
+	gdb_regs[DBG_REG_S6_OFF] = task->thread.s[6];
+	gdb_regs[DBG_REG_S7_OFF] = task->thread.s[7];
+	gdb_regs[DBG_REG_S8_OFF] = task->thread.s[8];
+	gdb_regs[DBG_REG_S9_OFF] = task->thread.s[10];
+	gdb_regs[DBG_REG_S10_OFF] = task->thread.s[11];
+	gdb_regs[DBG_REG_EPC_OFF] = task->thread.ra;
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->epc = pc;
+}
+
+void kgdb_arch_handle_qxfer_pkt(char *remcom_in_buffer,
+				char *remcom_out_buffer)
+{
+	if (!strncmp(remcom_in_buffer, gdb_xfer_read_target,
+		     sizeof(gdb_xfer_read_target)))
+		strcpy(remcom_out_buffer, riscv_gdb_stub_target_desc);
+	else if (!strncmp(remcom_in_buffer, gdb_xfer_read_cpuxml,
+			  sizeof(gdb_xfer_read_cpuxml)))
+		strcpy(remcom_out_buffer, riscv_gdb_stub_cpuxml);
+}
+
+static inline void kgdb_arch_update_addr(struct pt_regs *regs,
+					 char *remcom_in_buffer)
+{
+	unsigned long addr;
+	char *ptr;
+
+	ptr = &remcom_in_buffer[1];
+	if (kgdb_hex2long(&ptr, &addr))
+		regs->epc = addr;
+}
+
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	int err = 0;
+
+	undo_single_step(regs);
+
+	switch (remcom_in_buffer[0]) {
+	case 'c':
+	case 'D':
+	case 'k':
+		if (remcom_in_buffer[0] == 'c')
+			kgdb_arch_update_addr(regs, remcom_in_buffer);
+		break;
+	case 's':
+		kgdb_arch_update_addr(regs, remcom_in_buffer);
+		err = do_single_step(regs);
+		break;
+	default:
+		err = -1;
+	}
+	return err;
+}
+
+int kgdb_riscv_kgdbbreak(unsigned long addr)
+{
+	if (stepped_address == addr)
+		return KGDB_SW_SINGLE_STEP;
+	if (atomic_read(&kgdb_setting_breakpoint))
+		if (addr == (unsigned long)&kgdb_compiled_break)
+			return KGDB_COMPILED_BREAK;
+
+	return kgdb_has_hit_break(addr);
+}
+
+static int kgdb_riscv_notify(struct notifier_block *self, unsigned long cmd,
+			     void *ptr)
+{
+	struct die_args *args = (struct die_args *)ptr;
+	struct pt_regs *regs = args->regs;
+	unsigned long flags;
+	int type;
+
+	if (user_mode(regs))
+		return NOTIFY_DONE;
+
+	type = kgdb_riscv_kgdbbreak(regs->epc);
+	if (type == NOT_KGDB_BREAK && cmd == DIE_TRAP)
+		return NOTIFY_DONE;
+
+	local_irq_save(flags);
+
+	if (kgdb_handle_exception(type == KGDB_SW_SINGLE_STEP ? 0 : 1,
+				  args->signr, cmd, regs))
+		return NOTIFY_DONE;
+
+	if (type == KGDB_COMPILED_BREAK)
+		regs->epc += 4;
+
+	local_irq_restore(flags);
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call = kgdb_riscv_notify,
+};
+
+int kgdb_arch_init(void)
+{
+	register_die_notifier(&kgdb_notifier);
+
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
+
+/*
+ * Global data
+ */
+#ifdef CONFIG_RISCV_ISA_C
+const struct kgdb_arch arch_kgdb_ops = {
+	.gdb_bpt_instr = {0x02, 0x90},	/* c.ebreak */
+};
+#else
+const struct kgdb_arch arch_kgdb_ops = {
+	.gdb_bpt_instr = {0x73, 0x00, 0x10, 0x00},	/* ebreak */
+};
+#endif
diff --git a/arch/riscv/kernel/patch.c b/arch/riscv/kernel/patch.c
index 8a4fc65ee022..5805791cd5b5 100644
--- a/arch/riscv/kernel/patch.c
+++ b/arch/riscv/kernel/patch.c
@@ -5,22 +5,21 @@
 
 #include <linux/spinlock.h>
 #include <linux/mm.h>
+#include <linux/memory.h>
 #include <linux/uaccess.h>
 #include <linux/stop_machine.h>
 #include <asm/kprobes.h>
 #include <asm/cacheflush.h>
 #include <asm/fixmap.h>
 
-struct riscv_insn_patch {
+struct patch_insn {
 	void *addr;
 	u32 insn;
 	atomic_t cpu_count;
 };
 
 #ifdef CONFIG_MMU
-static DEFINE_RAW_SPINLOCK(patch_lock);
-
-static void __kprobes *patch_map(void *addr, int fixmap)
+static void *patch_map(void *addr, int fixmap)
 {
 	uintptr_t uintaddr = (uintptr_t) addr;
 	struct page *page;
@@ -37,20 +36,26 @@ static void __kprobes *patch_map(void *addr, int fixmap)
 	return (void *)set_fixmap_offset(fixmap, page_to_phys(page) +
 					 (uintaddr & ~PAGE_MASK));
 }
+NOKPROBE_SYMBOL(patch_map);
 
-static void __kprobes patch_unmap(int fixmap)
+static void patch_unmap(int fixmap)
 {
 	clear_fixmap(fixmap);
 }
+NOKPROBE_SYMBOL(patch_unmap);
 
-static int __kprobes riscv_insn_write(void *addr, const void *insn, size_t len)
+static int patch_insn_write(void *addr, const void *insn, size_t len)
 {
 	void *waddr = addr;
 	bool across_pages = (((uintptr_t) addr & ~PAGE_MASK) + len) > PAGE_SIZE;
-	unsigned long flags = 0;
 	int ret;
 
-	raw_spin_lock_irqsave(&patch_lock, flags);
+	/*
+	 * Before reaching here, it was expected to lock the text_mutex
+	 * already, so we don't need to give another lock here and could
+	 * ensure that it was safe between each cores.
+	 */
+	lockdep_assert_held(&text_mutex);
 
 	if (across_pages)
 		patch_map(addr + len, FIX_TEXT_POKE1);
@@ -64,38 +69,39 @@ static int __kprobes riscv_insn_write(void *addr, const void *insn, size_t len)
 	if (across_pages)
 		patch_unmap(FIX_TEXT_POKE1);
 
-	raw_spin_unlock_irqrestore(&patch_lock, flags);
-
 	return ret;
 }
+NOKPROBE_SYMBOL(patch_insn_write);
 #else
-static int __kprobes riscv_insn_write(void *addr, const void *insn, size_t len)
+static int patch_insn_write(void *addr, const void *insn, size_t len)
 {
 	return probe_kernel_write(addr, insn, len);
 }
+NOKPROBE_SYMBOL(patch_insn_write);
 #endif /* CONFIG_MMU */
 
-int __kprobes riscv_patch_text_nosync(void *addr, const void *insns, size_t len)
+int patch_text_nosync(void *addr, const void *insns, size_t len)
 {
 	u32 *tp = addr;
 	int ret;
 
-	ret = riscv_insn_write(tp, insns, len);
+	ret = patch_insn_write(tp, insns, len);
 
 	if (!ret)
 		flush_icache_range((uintptr_t) tp, (uintptr_t) tp + len);
 
 	return ret;
 }
+NOKPROBE_SYMBOL(patch_text_nosync);
 
-static int __kprobes riscv_patch_text_cb(void *data)
+static int patch_text_cb(void *data)
 {
-	struct riscv_insn_patch *patch = data;
+	struct patch_insn *patch = data;
 	int ret = 0;
 
 	if (atomic_inc_return(&patch->cpu_count) == 1) {
 		ret =
-		    riscv_patch_text_nosync(patch->addr, &patch->insn,
+		    patch_text_nosync(patch->addr, &patch->insn,
 					    GET_INSN_LENGTH(patch->insn));
 		atomic_inc(&patch->cpu_count);
 	} else {
@@ -106,15 +112,17 @@ static int __kprobes riscv_patch_text_cb(void *data)
 
 	return ret;
 }
+NOKPROBE_SYMBOL(patch_text_cb);
 
-int __kprobes riscv_patch_text(void *addr, u32 insn)
+int patch_text(void *addr, u32 insn)
 {
-	struct riscv_insn_patch patch = {
+	struct patch_insn patch = {
 		.addr = addr,
 		.insn = insn,
 		.cpu_count = ATOMIC_INIT(0),
 	};
 
-	return stop_machine_cpuslocked(riscv_patch_text_cb,
+	return stop_machine_cpuslocked(patch_text_cb,
 				       &patch, cpu_online_mask);
 }
+NOKPROBE_SYMBOL(patch_text);
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 7c24da59bccf..f383ef5672b2 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -102,7 +102,7 @@ void sbi_shutdown(void)
 {
 	sbi_ecall(SBI_EXT_0_1_SHUTDOWN, 0, 0, 0, 0, 0, 0, 0);
 }
-EXPORT_SYMBOL(sbi_set_timer);
+EXPORT_SYMBOL(sbi_shutdown);
 
 /**
  * sbi_clear_ipi() - Clear any pending IPIs for the calling hart.
@@ -113,7 +113,7 @@ void sbi_clear_ipi(void)
 {
 	sbi_ecall(SBI_EXT_0_1_CLEAR_IPI, 0, 0, 0, 0, 0, 0, 0);
 }
-EXPORT_SYMBOL(sbi_shutdown);
+EXPORT_SYMBOL(sbi_clear_ipi);
 
 /**
  * sbi_set_timer_v01() - Program the timer for next timer event.
@@ -167,6 +167,11 @@ static int __sbi_rfence_v01(int fid, const unsigned long *hart_mask,
 
 	return result;
 }
+
+static void sbi_set_power_off(void)
+{
+	pm_power_off = sbi_shutdown;
+}
 #else
 static void __sbi_set_timer_v01(uint64_t stime_value)
 {
@@ -191,6 +196,8 @@ static int __sbi_rfence_v01(int fid, const unsigned long *hart_mask,
 
 	return 0;
 }
+
+static void sbi_set_power_off(void) {}
 #endif /* CONFIG_RISCV_SBI_V01 */
 
 static void __sbi_set_timer_v02(uint64_t stime_value)
@@ -540,16 +547,12 @@ static inline long sbi_get_firmware_version(void)
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_VERSION);
 }
 
-static void sbi_power_off(void)
-{
-	sbi_shutdown();
-}
 
 int __init sbi_init(void)
 {
 	int ret;
 
-	pm_power_off = sbi_power_off;
+	sbi_set_power_off();
 	ret = sbi_get_spec_version();
 	if (ret > 0)
 		sbi_spec_version = ret;
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 145128a7e560..3e528312f615 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -75,7 +75,11 @@ void __init setup_arch(char **cmdline_p)
 
 	setup_bootmem();
 	paging_init();
+#if IS_ENABLED(CONFIG_BUILTIN_DTB)
+	unflatten_and_copy_device_tree();
+#else
 	unflatten_device_tree();
+#endif
 	clint_init_boot_cpu();
 
 #ifdef CONFIG_SWIOTLB
diff --git a/arch/riscv/kernel/soc.c b/arch/riscv/kernel/soc.c
index 0b3b3dc9ad0f..1fc87621c728 100644
--- a/arch/riscv/kernel/soc.c
+++ b/arch/riscv/kernel/soc.c
@@ -26,3 +26,30 @@ void __init soc_early_init(void)
 		}
 	}
 }
+
+static bool soc_builtin_dtb_match(unsigned long vendor_id,
+				unsigned long arch_id, unsigned long imp_id,
+				const struct soc_builtin_dtb *entry)
+{
+	return entry->vendor_id == vendor_id &&
+	       entry->arch_id == arch_id &&
+	       entry->imp_id == imp_id;
+}
+
+void * __init soc_lookup_builtin_dtb(void)
+{
+	unsigned long vendor_id, arch_id, imp_id;
+	const struct soc_builtin_dtb *s;
+
+	__asm__ ("csrr %0, mvendorid" : "=r"(vendor_id));
+	__asm__ ("csrr %0, marchid" : "=r"(arch_id));
+	__asm__ ("csrr %0, mimpid" : "=r"(imp_id));
+
+	for (s = (void *)&__soc_builtin_dtb_table_start;
+	     (void *)s < (void *)&__soc_builtin_dtb_table_end; s++) {
+		if (soc_builtin_dtb_match(vendor_id, arch_id, imp_id, s))
+			return s->dtb_func();
+	}
+
+	return NULL;
+}
diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c
index 02087fe539c6..38141a3c70f7 100644
--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@@ -12,6 +12,8 @@
 #include <linux/stacktrace.h>
 #include <linux/ftrace.h>
 
+register unsigned long sp_in_global __asm__("sp");
+
 #ifdef CONFIG_FRAME_POINTER
 
 struct stackframe {
@@ -19,8 +21,6 @@ struct stackframe {
 	unsigned long ra;
 };
 
-register unsigned long sp_in_global __asm__("sp");
-
 void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 			     bool (*fn)(unsigned long, void *), void *arg)
 {
@@ -99,17 +99,18 @@ static void notrace walk_stackframe(struct task_struct *task,
 
 static bool print_trace_address(unsigned long pc, void *arg)
 {
-	print_ip_sym(pc);
+	const char *loglvl = arg;
+
+	print_ip_sym(loglvl, pc);
 	return false;
 }
 
-void show_stack(struct task_struct *task, unsigned long *sp)
+void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
 {
 	pr_cont("Call Trace:\n");
-	walk_stackframe(task, NULL, print_trace_address, NULL);
+	walk_stackframe(task, NULL, print_trace_address, (void *)loglvl);
 }
 
-
 static bool save_wchan(unsigned long pc, void *arg)
 {
 	if (!in_sched_functions(pc)) {
diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index 7f58fa53033f..5080fdf8c296 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -147,6 +147,11 @@ asmlinkage __visible void do_trap_break(struct pt_regs *regs)
 {
 	if (user_mode(regs))
 		force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->epc);
+#ifdef CONFIG_KGDB
+	else if (notify_die(DIE_TRAP, "EBREAK", regs, 0, regs->cause, SIGTRAP)
+								== NOTIFY_STOP)
+		return;
+#endif
 	else if (report_bug(regs->epc, regs) == BUG_TRAP_TYPE_WARN)
 		regs->epc += get_break_insn_length(regs->epc);
 	else
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 33b16f4212f7..a4ee3a0e7d20 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -33,15 +33,15 @@ $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
 	$(call if_changed,vdsold)
 
 # We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO.  With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
+# table and layout of the linked DSO. With ld --just-symbols we can then
+# refer to these symbols in the kernel code rather than hand-coded addresses.
 
 SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
 	-Wl,--build-id -Wl,--hash-style=both
 $(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE
 	$(call if_changed,vdsold)
 
-LDFLAGS_vdso-syms.o := -r -R
+LDFLAGS_vdso-syms.o := -r --just-symbols
 $(obj)/vdso-syms.o: $(obj)/vdso-dummy.o FORCE
 	$(call if_changed,ld)
 
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index 0339b6bbe11a..e6f8016b366a 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -34,6 +34,11 @@ SECTIONS
 		KEEP(*(__soc_early_init_table))
 		__soc_early_init_table_end = .;
 	}
+	__soc_builtin_dtb_table : {
+		__soc_builtin_dtb_table_start = .;
+		KEEP(*(__soc_builtin_dtb_table))
+		__soc_builtin_dtb_table_end = .;
+	}
 	/* we have to discard exit text and such at runtime, not link time */
 	.exit.text :
 	{
diff --git a/arch/riscv/mm/hugetlbpage.c b/arch/riscv/mm/hugetlbpage.c
index a6189ed36c5f..932dadfdca54 100644
--- a/arch/riscv/mm/hugetlbpage.c
+++ b/arch/riscv/mm/hugetlbpage.c
@@ -12,29 +12,21 @@ int pmd_huge(pmd_t pmd)
 	return pmd_leaf(pmd);
 }
 
-static __init int setup_hugepagesz(char *opt)
+bool __init arch_hugetlb_valid_size(unsigned long size)
 {
-	unsigned long ps = memparse(opt, &opt);
-
-	if (ps == HPAGE_SIZE) {
-		hugetlb_add_hstate(HPAGE_SHIFT - PAGE_SHIFT);
-	} else if (IS_ENABLED(CONFIG_64BIT) && ps == PUD_SIZE) {
-		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
-	} else {
-		hugetlb_bad_size();
-		pr_err("hugepagesz: Unsupported page size %lu M\n", ps >> 20);
-		return 0;
-	}
-
-	return 1;
+	if (size == HPAGE_SIZE)
+		return true;
+	else if (IS_ENABLED(CONFIG_64BIT) && size == PUD_SIZE)
+		return true;
+	else
+		return false;
 }
-__setup("hugepagesz=", setup_hugepagesz);
 
 #ifdef CONFIG_CONTIG_ALLOC
 static __init int gigantic_pages_init(void)
 {
 	/* With CONTIG_ALLOC, we can allocate gigantic pages at runtime */
-	if (IS_ENABLED(CONFIG_64BIT) && !size_to_hstate(1UL << PUD_SHIFT))
+	if (IS_ENABLED(CONFIG_64BIT))
 		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
 	return 0;
 }
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index b55be44ff9bd..f5956141cd0a 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -17,8 +17,10 @@
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 #include <asm/sections.h>
+#include <asm/soc.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
+#include <asm/ptdump.h>
 
 #include "../kernel/head.h"
 
@@ -39,7 +41,7 @@ static void __init zone_sizes_init(void)
 #endif
 	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
 
-	free_area_init_nodes(max_zone_pfns);
+	free_area_init(max_zone_pfns);
 }
 
 static void setup_zero_page(void)
@@ -492,7 +494,15 @@ void free_initmem(void)
 #else
 asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 {
+#ifdef CONFIG_BUILTIN_DTB
+	dtb_early_va = soc_lookup_builtin_dtb();
+	if (!dtb_early_va) {
+		/* Fallback to first available DTS */
+		dtb_early_va = (void *) __dtb_start;
+	}
+#else
 	dtb_early_va = (void *)dtb_pa;
+#endif
 }
 
 static inline void setup_vm_final(void)
@@ -529,6 +539,8 @@ void mark_rodata_ro(void)
 	set_memory_ro(rodata_start, (data_start - rodata_start) >> PAGE_SHIFT);
 	set_memory_nx(rodata_start, (data_start - rodata_start) >> PAGE_SHIFT);
 	set_memory_nx(data_start, (max_low - data_start) >> PAGE_SHIFT);
+
+	debug_checkwx();
 }
 #endif
 
diff --git a/arch/riscv/net/bpf_jit_comp32.c b/arch/riscv/net/bpf_jit_comp32.c
index 302934177760..11083d4d5f2d 100644
--- a/arch/riscv/net/bpf_jit_comp32.c
+++ b/arch/riscv/net/bpf_jit_comp32.c
@@ -770,12 +770,13 @@ static int emit_bpf_tail_call(int insn, struct rv_jit_context *ctx)
 	emit_bcc(BPF_JGE, lo(idx_reg), RV_REG_T1, off, ctx);
 
 	/*
-	 * if ((temp_tcc = tcc - 1) < 0)
+	 * temp_tcc = tcc - 1;
+	 * if (tcc < 0)
 	 *   goto out;
 	 */
 	emit(rv_addi(RV_REG_T1, RV_REG_TCC, -1), ctx);
 	off = (tc_ninsn - (ctx->ninsns - start_insn)) << 2;
-	emit_bcc(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
+	emit_bcc(BPF_JSLT, RV_REG_TCC, RV_REG_ZERO, off, ctx);
 
 	/*
 	 * prog = array->ptrs[index];
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2167bce993ff..f854faff38c3 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -59,6 +59,7 @@ config KASAN_SHADOW_OFFSET
 config S390
 	def_bool y
 	select ARCH_BINFMT_ELF_STATE
+	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -162,7 +163,6 @@ config S390
 	select HAVE_LIVEPATCH
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_MEMBLOCK_PHYS_MAP
 	select MMU_GATHER_NO_GATHER
 	select HAVE_MOD_ARCH_SPECIFIC
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index aa738cad1338..d74a4c7d5df6 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -51,10 +51,9 @@ static struct platform_device *appldata_pdev;
  */
 static const char appldata_proc_name[APPLDATA_PROC_NAME_LENGTH] = "appldata";
 static int appldata_timer_handler(struct ctl_table *ctl, int write,
-				  void __user *buffer, size_t *lenp, loff_t *ppos);
+				  void *buffer, size_t *lenp, loff_t *ppos);
 static int appldata_interval_handler(struct ctl_table *ctl, int write,
-					 void __user *buffer,
-					 size_t *lenp, loff_t *ppos);
+				     void *buffer, size_t *lenp, loff_t *ppos);
 
 static struct ctl_table_header *appldata_sysctl_header;
 static struct ctl_table appldata_table[] = {
@@ -217,7 +216,7 @@ static void __appldata_vtimer_setup(int cmd)
  */
 static int
 appldata_timer_handler(struct ctl_table *ctl, int write,
-			   void __user *buffer, size_t *lenp, loff_t *ppos)
+			   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int timer_active = appldata_timer_active;
 	int rc;
@@ -250,7 +249,7 @@ appldata_timer_handler(struct ctl_table *ctl, int write,
  */
 static int
 appldata_interval_handler(struct ctl_table *ctl, int write,
-			   void __user *buffer, size_t *lenp, loff_t *ppos)
+			   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int interval = appldata_interval;
 	int rc;
@@ -280,7 +279,7 @@ appldata_interval_handler(struct ctl_table *ctl, int write,
  */
 static int
 appldata_generic_handler(struct ctl_table *ctl, int write,
-			   void __user *buffer, size_t *lenp, loff_t *ppos)
+			   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct appldata_ops *ops = NULL, *tmp_ops;
 	struct list_head *lh;
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index 7485ee561fec..c1558cf071b8 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -22,12 +22,17 @@ int pci_domain_nr(struct pci_bus *);
 int pci_proc_domain(struct pci_bus *);
 
 #define ZPCI_BUS_NR			0	/* default bus number */
-#define ZPCI_DEVFN			0	/* default device number */
 
 #define ZPCI_NR_DMA_SPACES		1
 #define ZPCI_NR_DEVICES			CONFIG_PCI_NR_FUNCTIONS
 #define ZPCI_DOMAIN_BITMAP_SIZE		(1 << 16)
 
+#ifdef PCI
+#if (ZPCI_NR_DEVICES > ZPCI_DOMAIN_BITMAP_SIZE)
+# error ZPCI_NR_DEVICES can not be bigger than ZPCI_DOMAIN_BITMAP_SIZE
+#endif
+#endif /* PCI */
+
 /* PCI Function Controls */
 #define ZPCI_FC_FN_ENABLED		0x80
 #define ZPCI_FC_ERROR			0x40
@@ -94,10 +99,26 @@ struct zpci_bar_struct {
 
 struct s390_domain;
 
+#define ZPCI_FUNCTIONS_PER_BUS 256
+struct zpci_bus {
+	struct kref		kref;
+	struct pci_bus		*bus;
+	struct zpci_dev		*function[ZPCI_FUNCTIONS_PER_BUS];
+	struct list_head	resources;
+	struct list_head	bus_next;
+	struct resource		bus_resource;
+	int			pchid;
+	int			domain_nr;
+	bool			multifunction;
+	enum pci_bus_speed	max_bus_speed;
+};
+
 /* Private data per function */
 struct zpci_dev {
-	struct pci_bus	*bus;
+	struct zpci_bus *zbus;
 	struct list_head entry;		/* list of all zpci_devices, needed for hotplug, etc. */
+	struct list_head bus_next;
+	struct kref kref;
 	struct hotplug_slot hotplug_slot;
 
 	enum zpci_state state;
@@ -107,7 +128,11 @@ struct zpci_dev {
 	u16		pchid;		/* physical channel ID */
 	u8		pfgid;		/* function group ID */
 	u8		pft;		/* pci function type */
-	u16		domain;
+	u8		port;
+	u8		rid_available	: 1;
+	u8		has_hp_slot	: 1;
+	u8		reserved	: 6;
+	unsigned int	devfn;		/* DEVFN part of the RID*/
 
 	struct mutex lock;
 	u8 pfip[CLP_PFIP_NR_SEGMENTS];	/* pci function internal path */
@@ -167,6 +192,7 @@ static inline bool zdev_enabled(struct zpci_dev *zdev)
 
 extern const struct attribute_group *zpci_attr_groups[];
 extern unsigned int s390_pci_force_floating __initdata;
+extern unsigned int s390_pci_no_rid;
 
 /* -----------------------------------------------------------------------------
   Prototypes
@@ -227,7 +253,14 @@ static inline void zpci_exit_slot(struct zpci_dev *zdev) {}
 /* Helpers */
 static inline struct zpci_dev *to_zpci(struct pci_dev *pdev)
 {
-	return pdev->sysdata;
+	struct zpci_bus *zbus = pdev->sysdata;
+
+	return zbus->function[pdev->devfn];
+}
+
+static inline struct zpci_dev *to_zpci_dev(struct device *dev)
+{
+	return to_zpci(to_pci_dev(dev));
 }
 
 struct zpci_dev *get_zdev_by_fid(u32);
diff --git a/arch/s390/include/asm/pci_clp.h b/arch/s390/include/asm/pci_clp.h
index bd2cb4ea7d93..896ee41e23e3 100644
--- a/arch/s390/include/asm/pci_clp.h
+++ b/arch/s390/include/asm/pci_clp.h
@@ -93,7 +93,9 @@ struct clp_req_query_pci {
 struct clp_rsp_query_pci {
 	struct clp_rsp_hdr hdr;
 	u16 vfn;			/* virtual fn number */
-	u16			:  6;
+	u16			:  3;
+	u16 rid_avail		:  1;
+	u16			:  2;
 	u16 mio_addr_avail	:  1;
 	u16 util_str_avail	:  1;	/* utility string available? */
 	u16 pfgid		:  8;	/* pci function group id */
@@ -102,12 +104,16 @@ struct clp_rsp_query_pci {
 	u16 pchid;
 	__le32 bar[PCI_STD_NUM_BARS];
 	u8 pfip[CLP_PFIP_NR_SEGMENTS];	/* pci function internal path */
-	u32			: 16;
+	u16			: 12;
+	u16 port		:  4;
 	u8 fmb_len;
 	u8 pft;				/* pci function type */
 	u64 sdma;			/* start dma as */
 	u64 edma;			/* end dma as */
-	u32 reserved[11];
+#define ZPCI_RID_MASK_DEVFN 0x00ff
+	u16 rid;			/* BUS/DEVFN PCI address */
+	u16 reserved0;
+	u32 reserved[10];
 	u32 uid;			/* user defined id */
 	u8 util_str[CLP_UTIL_STR_LEN];	/* utility string */
 	u32 reserved2[16];
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 6d321f5f101d..636446003a06 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -867,7 +867,7 @@ static int debug_active = 1;
  * if debug_active is already off
  */
 static int s390dbf_procactive(struct ctl_table *table, int write,
-			      void __user *buffer, size_t *lenp, loff_t *ppos)
+			      void *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (!write || debug_stoppable || !debug_active)
 		return proc_dointvec(table, write, buffer, lenp, ppos);
diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c
index 2c122d8bab93..0dc4b258b98d 100644
--- a/arch/s390/kernel/dumpstack.c
+++ b/arch/s390/kernel/dumpstack.c
@@ -126,15 +126,16 @@ int get_stack_info(unsigned long sp, struct task_struct *task,
 	return -EINVAL;
 }
 
-void show_stack(struct task_struct *task, unsigned long *stack)
+void show_stack(struct task_struct *task, unsigned long *stack,
+		       const char *loglvl)
 {
 	struct unwind_state state;
 
-	printk("Call Trace:\n");
+	printk("%sCall Trace:\n", loglvl);
 	unwind_for_each_frame(&state, task, NULL, (unsigned long) stack)
-		printk(state.reliable ? " [<%016lx>] %pSR \n" :
-					"([<%016lx>] %pSR)\n",
-		       state.ip, (void *) state.ip);
+		printk(state.reliable ? "%s [<%016lx>] %pSR \n" :
+					"%s([<%016lx>] %pSR)\n",
+		       loglvl, state.ip, (void *) state.ip);
 	debug_show_held_locks(task ? : current);
 }
 
@@ -175,7 +176,7 @@ void show_regs(struct pt_regs *regs)
 	show_registers(regs);
 	/* Show stack backtrace if pt_regs is from kernel mode */
 	if (!user_mode(regs))
-		show_stack(NULL, (unsigned long *) regs->gprs[15]);
+		show_stack(NULL, (unsigned long *) regs->gprs[15], KERN_DEFAULT);
 	show_last_breaking_event(regs);
 }
 
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 36445dd40fdb..0f0b140b5558 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -305,12 +305,9 @@ void *restart_stack __section(.data);
 unsigned long stack_alloc(void)
 {
 #ifdef CONFIG_VMAP_STACK
-	return (unsigned long)
-		__vmalloc_node_range(THREAD_SIZE, THREAD_SIZE,
-				     VMALLOC_START, VMALLOC_END,
-				     THREADINFO_GFP,
-				     PAGE_KERNEL, 0, NUMA_NO_NODE,
-				     __builtin_return_address(0));
+	return (unsigned long)__vmalloc_node(THREAD_SIZE, THREAD_SIZE,
+			THREADINFO_GFP, NUMA_NO_NODE,
+			__builtin_return_address(0));
 #else
 	return __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER);
 #endif
diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl
index bd7bd3581a0f..69f4a5459f0e 100644
--- a/arch/s390/kernel/syscalls/syscall.tbl
+++ b/arch/s390/kernel/syscalls/syscall.tbl
@@ -440,3 +440,4 @@
 435  common	clone3			sys_clone3			sys_clone3
 437  common	openat2			sys_openat2			sys_openat2
 438  common	pidfd_getfd		sys_pidfd_getfd			sys_pidfd_getfd
+439  common	process_madvise		sys_process_madvise		compat_sys_process_madvise
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 5f70cefc13e4..332b542548cd 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -594,7 +594,7 @@ static int __init topology_setup(char *str)
 early_param("topology", topology_setup);
 
 static int topology_ctl_handler(struct ctl_table *ctl, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int enabled = topology_is_enabled();
 	int new_mode;
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index bfb481134994..a4d4ca2769bd 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -3082,7 +3082,7 @@ static enum hrtimer_restart gisa_vcpu_kicker(struct hrtimer *timer)
 		__airqs_kick_single_vcpu(kvm, pending_mask);
 		hrtimer_forward_now(timer, ns_to_ktime(gi->expires));
 		return HRTIMER_RESTART;
-	};
+	}
 
 	return HRTIMER_NORESTART;
 }
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 5dcf9ff12828..75471b646fd7 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -57,110 +57,107 @@
 #define VCPU_IRQS_MAX_BUF (sizeof(struct kvm_s390_irq) * \
 			   (KVM_MAX_VCPUS + LOCAL_IRQS))
 
-#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
-#define VM_STAT(x) offsetof(struct kvm, stat.x), KVM_STAT_VM
-
 struct kvm_stats_debugfs_item debugfs_entries[] = {
-	{ "userspace_handled", VCPU_STAT(exit_userspace) },
-	{ "exit_null", VCPU_STAT(exit_null) },
-	{ "exit_validity", VCPU_STAT(exit_validity) },
-	{ "exit_stop_request", VCPU_STAT(exit_stop_request) },
-	{ "exit_external_request", VCPU_STAT(exit_external_request) },
-	{ "exit_io_request", VCPU_STAT(exit_io_request) },
-	{ "exit_external_interrupt", VCPU_STAT(exit_external_interrupt) },
-	{ "exit_instruction", VCPU_STAT(exit_instruction) },
-	{ "exit_pei", VCPU_STAT(exit_pei) },
-	{ "exit_program_interruption", VCPU_STAT(exit_program_interruption) },
-	{ "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) },
-	{ "exit_operation_exception", VCPU_STAT(exit_operation_exception) },
-	{ "halt_successful_poll", VCPU_STAT(halt_successful_poll) },
-	{ "halt_attempted_poll", VCPU_STAT(halt_attempted_poll) },
-	{ "halt_poll_invalid", VCPU_STAT(halt_poll_invalid) },
-	{ "halt_no_poll_steal", VCPU_STAT(halt_no_poll_steal) },
-	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
-	{ "instruction_lctlg", VCPU_STAT(instruction_lctlg) },
-	{ "instruction_lctl", VCPU_STAT(instruction_lctl) },
-	{ "instruction_stctl", VCPU_STAT(instruction_stctl) },
-	{ "instruction_stctg", VCPU_STAT(instruction_stctg) },
-	{ "deliver_ckc", VCPU_STAT(deliver_ckc) },
-	{ "deliver_cputm", VCPU_STAT(deliver_cputm) },
-	{ "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) },
-	{ "deliver_external_call", VCPU_STAT(deliver_external_call) },
-	{ "deliver_service_signal", VCPU_STAT(deliver_service_signal) },
-	{ "deliver_virtio", VCPU_STAT(deliver_virtio) },
-	{ "deliver_stop_signal", VCPU_STAT(deliver_stop_signal) },
-	{ "deliver_prefix_signal", VCPU_STAT(deliver_prefix_signal) },
-	{ "deliver_restart_signal", VCPU_STAT(deliver_restart_signal) },
-	{ "deliver_program", VCPU_STAT(deliver_program) },
-	{ "deliver_io", VCPU_STAT(deliver_io) },
-	{ "deliver_machine_check", VCPU_STAT(deliver_machine_check) },
-	{ "exit_wait_state", VCPU_STAT(exit_wait_state) },
-	{ "inject_ckc", VCPU_STAT(inject_ckc) },
-	{ "inject_cputm", VCPU_STAT(inject_cputm) },
-	{ "inject_external_call", VCPU_STAT(inject_external_call) },
-	{ "inject_float_mchk", VM_STAT(inject_float_mchk) },
-	{ "inject_emergency_signal", VCPU_STAT(inject_emergency_signal) },
-	{ "inject_io", VM_STAT(inject_io) },
-	{ "inject_mchk", VCPU_STAT(inject_mchk) },
-	{ "inject_pfault_done", VM_STAT(inject_pfault_done) },
-	{ "inject_program", VCPU_STAT(inject_program) },
-	{ "inject_restart", VCPU_STAT(inject_restart) },
-	{ "inject_service_signal", VM_STAT(inject_service_signal) },
-	{ "inject_set_prefix", VCPU_STAT(inject_set_prefix) },
-	{ "inject_stop_signal", VCPU_STAT(inject_stop_signal) },
-	{ "inject_pfault_init", VCPU_STAT(inject_pfault_init) },
-	{ "inject_virtio", VM_STAT(inject_virtio) },
-	{ "instruction_epsw", VCPU_STAT(instruction_epsw) },
-	{ "instruction_gs", VCPU_STAT(instruction_gs) },
-	{ "instruction_io_other", VCPU_STAT(instruction_io_other) },
-	{ "instruction_lpsw", VCPU_STAT(instruction_lpsw) },
-	{ "instruction_lpswe", VCPU_STAT(instruction_lpswe) },
-	{ "instruction_pfmf", VCPU_STAT(instruction_pfmf) },
-	{ "instruction_ptff", VCPU_STAT(instruction_ptff) },
-	{ "instruction_stidp", VCPU_STAT(instruction_stidp) },
-	{ "instruction_sck", VCPU_STAT(instruction_sck) },
-	{ "instruction_sckpf", VCPU_STAT(instruction_sckpf) },
-	{ "instruction_spx", VCPU_STAT(instruction_spx) },
-	{ "instruction_stpx", VCPU_STAT(instruction_stpx) },
-	{ "instruction_stap", VCPU_STAT(instruction_stap) },
-	{ "instruction_iske", VCPU_STAT(instruction_iske) },
-	{ "instruction_ri", VCPU_STAT(instruction_ri) },
-	{ "instruction_rrbe", VCPU_STAT(instruction_rrbe) },
-	{ "instruction_sske", VCPU_STAT(instruction_sske) },
-	{ "instruction_ipte_interlock", VCPU_STAT(instruction_ipte_interlock) },
-	{ "instruction_essa", VCPU_STAT(instruction_essa) },
-	{ "instruction_stsi", VCPU_STAT(instruction_stsi) },
-	{ "instruction_stfl", VCPU_STAT(instruction_stfl) },
-	{ "instruction_tb", VCPU_STAT(instruction_tb) },
-	{ "instruction_tpi", VCPU_STAT(instruction_tpi) },
-	{ "instruction_tprot", VCPU_STAT(instruction_tprot) },
-	{ "instruction_tsch", VCPU_STAT(instruction_tsch) },
-	{ "instruction_sthyi", VCPU_STAT(instruction_sthyi) },
-	{ "instruction_sie", VCPU_STAT(instruction_sie) },
-	{ "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) },
-	{ "instruction_sigp_sense_running", VCPU_STAT(instruction_sigp_sense_running) },
-	{ "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) },
-	{ "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) },
-	{ "instruction_sigp_cond_emergency", VCPU_STAT(instruction_sigp_cond_emergency) },
-	{ "instruction_sigp_start", VCPU_STAT(instruction_sigp_start) },
-	{ "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) },
-	{ "instruction_sigp_stop_store_status", VCPU_STAT(instruction_sigp_stop_store_status) },
-	{ "instruction_sigp_store_status", VCPU_STAT(instruction_sigp_store_status) },
-	{ "instruction_sigp_store_adtl_status", VCPU_STAT(instruction_sigp_store_adtl_status) },
-	{ "instruction_sigp_set_arch", VCPU_STAT(instruction_sigp_arch) },
-	{ "instruction_sigp_set_prefix", VCPU_STAT(instruction_sigp_prefix) },
-	{ "instruction_sigp_restart", VCPU_STAT(instruction_sigp_restart) },
-	{ "instruction_sigp_cpu_reset", VCPU_STAT(instruction_sigp_cpu_reset) },
-	{ "instruction_sigp_init_cpu_reset", VCPU_STAT(instruction_sigp_init_cpu_reset) },
-	{ "instruction_sigp_unknown", VCPU_STAT(instruction_sigp_unknown) },
-	{ "instruction_diag_10", VCPU_STAT(diagnose_10) },
-	{ "instruction_diag_44", VCPU_STAT(diagnose_44) },
-	{ "instruction_diag_9c", VCPU_STAT(diagnose_9c) },
-	{ "diag_9c_ignored", VCPU_STAT(diagnose_9c_ignored) },
-	{ "instruction_diag_258", VCPU_STAT(diagnose_258) },
-	{ "instruction_diag_308", VCPU_STAT(diagnose_308) },
-	{ "instruction_diag_500", VCPU_STAT(diagnose_500) },
-	{ "instruction_diag_other", VCPU_STAT(diagnose_other) },
+	VCPU_STAT("userspace_handled", exit_userspace),
+	VCPU_STAT("exit_null", exit_null),
+	VCPU_STAT("exit_validity", exit_validity),
+	VCPU_STAT("exit_stop_request", exit_stop_request),
+	VCPU_STAT("exit_external_request", exit_external_request),
+	VCPU_STAT("exit_io_request", exit_io_request),
+	VCPU_STAT("exit_external_interrupt", exit_external_interrupt),
+	VCPU_STAT("exit_instruction", exit_instruction),
+	VCPU_STAT("exit_pei", exit_pei),
+	VCPU_STAT("exit_program_interruption", exit_program_interruption),
+	VCPU_STAT("exit_instr_and_program_int", exit_instr_and_program),
+	VCPU_STAT("exit_operation_exception", exit_operation_exception),
+	VCPU_STAT("halt_successful_poll", halt_successful_poll),
+	VCPU_STAT("halt_attempted_poll", halt_attempted_poll),
+	VCPU_STAT("halt_poll_invalid", halt_poll_invalid),
+	VCPU_STAT("halt_no_poll_steal", halt_no_poll_steal),
+	VCPU_STAT("halt_wakeup", halt_wakeup),
+	VCPU_STAT("instruction_lctlg", instruction_lctlg),
+	VCPU_STAT("instruction_lctl", instruction_lctl),
+	VCPU_STAT("instruction_stctl", instruction_stctl),
+	VCPU_STAT("instruction_stctg", instruction_stctg),
+	VCPU_STAT("deliver_ckc", deliver_ckc),
+	VCPU_STAT("deliver_cputm", deliver_cputm),
+	VCPU_STAT("deliver_emergency_signal", deliver_emergency_signal),
+	VCPU_STAT("deliver_external_call", deliver_external_call),
+	VCPU_STAT("deliver_service_signal", deliver_service_signal),
+	VCPU_STAT("deliver_virtio", deliver_virtio),
+	VCPU_STAT("deliver_stop_signal", deliver_stop_signal),
+	VCPU_STAT("deliver_prefix_signal", deliver_prefix_signal),
+	VCPU_STAT("deliver_restart_signal", deliver_restart_signal),
+	VCPU_STAT("deliver_program", deliver_program),
+	VCPU_STAT("deliver_io", deliver_io),
+	VCPU_STAT("deliver_machine_check", deliver_machine_check),
+	VCPU_STAT("exit_wait_state", exit_wait_state),
+	VCPU_STAT("inject_ckc", inject_ckc),
+	VCPU_STAT("inject_cputm", inject_cputm),
+	VCPU_STAT("inject_external_call", inject_external_call),
+	VM_STAT("inject_float_mchk", inject_float_mchk),
+	VCPU_STAT("inject_emergency_signal", inject_emergency_signal),
+	VM_STAT("inject_io", inject_io),
+	VCPU_STAT("inject_mchk", inject_mchk),
+	VM_STAT("inject_pfault_done", inject_pfault_done),
+	VCPU_STAT("inject_program", inject_program),
+	VCPU_STAT("inject_restart", inject_restart),
+	VM_STAT("inject_service_signal", inject_service_signal),
+	VCPU_STAT("inject_set_prefix", inject_set_prefix),
+	VCPU_STAT("inject_stop_signal", inject_stop_signal),
+	VCPU_STAT("inject_pfault_init", inject_pfault_init),
+	VM_STAT("inject_virtio", inject_virtio),
+	VCPU_STAT("instruction_epsw", instruction_epsw),
+	VCPU_STAT("instruction_gs", instruction_gs),
+	VCPU_STAT("instruction_io_other", instruction_io_other),
+	VCPU_STAT("instruction_lpsw", instruction_lpsw),
+	VCPU_STAT("instruction_lpswe", instruction_lpswe),
+	VCPU_STAT("instruction_pfmf", instruction_pfmf),
+	VCPU_STAT("instruction_ptff", instruction_ptff),
+	VCPU_STAT("instruction_stidp", instruction_stidp),
+	VCPU_STAT("instruction_sck", instruction_sck),
+	VCPU_STAT("instruction_sckpf", instruction_sckpf),
+	VCPU_STAT("instruction_spx", instruction_spx),
+	VCPU_STAT("instruction_stpx", instruction_stpx),
+	VCPU_STAT("instruction_stap", instruction_stap),
+	VCPU_STAT("instruction_iske", instruction_iske),
+	VCPU_STAT("instruction_ri", instruction_ri),
+	VCPU_STAT("instruction_rrbe", instruction_rrbe),
+	VCPU_STAT("instruction_sske", instruction_sske),
+	VCPU_STAT("instruction_ipte_interlock", instruction_ipte_interlock),
+	VCPU_STAT("instruction_essa", instruction_essa),
+	VCPU_STAT("instruction_stsi", instruction_stsi),
+	VCPU_STAT("instruction_stfl", instruction_stfl),
+	VCPU_STAT("instruction_tb", instruction_tb),
+	VCPU_STAT("instruction_tpi", instruction_tpi),
+	VCPU_STAT("instruction_tprot", instruction_tprot),
+	VCPU_STAT("instruction_tsch", instruction_tsch),
+	VCPU_STAT("instruction_sthyi", instruction_sthyi),
+	VCPU_STAT("instruction_sie", instruction_sie),
+	VCPU_STAT("instruction_sigp_sense", instruction_sigp_sense),
+	VCPU_STAT("instruction_sigp_sense_running", instruction_sigp_sense_running),
+	VCPU_STAT("instruction_sigp_external_call", instruction_sigp_external_call),
+	VCPU_STAT("instruction_sigp_emergency", instruction_sigp_emergency),
+	VCPU_STAT("instruction_sigp_cond_emergency", instruction_sigp_cond_emergency),
+	VCPU_STAT("instruction_sigp_start", instruction_sigp_start),
+	VCPU_STAT("instruction_sigp_stop", instruction_sigp_stop),
+	VCPU_STAT("instruction_sigp_stop_store_status", instruction_sigp_stop_store_status),
+	VCPU_STAT("instruction_sigp_store_status", instruction_sigp_store_status),
+	VCPU_STAT("instruction_sigp_store_adtl_status", instruction_sigp_store_adtl_status),
+	VCPU_STAT("instruction_sigp_set_arch", instruction_sigp_arch),
+	VCPU_STAT("instruction_sigp_set_prefix", instruction_sigp_prefix),
+	VCPU_STAT("instruction_sigp_restart", instruction_sigp_restart),
+	VCPU_STAT("instruction_sigp_cpu_reset", instruction_sigp_cpu_reset),
+	VCPU_STAT("instruction_sigp_init_cpu_reset", instruction_sigp_init_cpu_reset),
+	VCPU_STAT("instruction_sigp_unknown", instruction_sigp_unknown),
+	VCPU_STAT("instruction_diag_10", diagnose_10),
+	VCPU_STAT("instruction_diag_44", diagnose_44),
+	VCPU_STAT("instruction_diag_9c", diagnose_9c),
+	VCPU_STAT("diag_9c_ignored", diagnose_9c_ignored),
+	VCPU_STAT("instruction_diag_258", diagnose_258),
+	VCPU_STAT("instruction_diag_308", diagnose_308),
+	VCPU_STAT("instruction_diag_500", diagnose_500),
+	VCPU_STAT("instruction_diag_other", diagnose_other),
 	{ NULL }
 };
 
@@ -4336,8 +4333,9 @@ static void store_regs(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		store_regs_fmt2(vcpu, kvm_run);
 }
 
-int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 {
+	struct kvm_run *kvm_run = vcpu->run;
 	int rc;
 
 	if (kvm_run->immediate_exit)
diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index 4f6c22d72072..ef05b4e167fb 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -1000,8 +1000,6 @@ static int do_vsie_run(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 
 	handle_last_fault(vcpu, vsie_page);
 
-	if (need_resched())
-		schedule();
 	if (test_cpu_flag(CIF_MCCK_PENDING))
 		s390_handle_mcck();
 
@@ -1185,6 +1183,7 @@ static int vsie_run(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 		    kvm_s390_vcpu_has_irq(vcpu, 0) ||
 		    kvm_s390_vcpu_sie_inhibited(vcpu))
 			break;
+		cond_resched();
 	}
 
 	if (rc == -EFAULT) {
diff --git a/arch/s390/lib/uaccess.c b/arch/s390/lib/uaccess.c
index c4f8039a35e8..0267405ab7c6 100644
--- a/arch/s390/lib/uaccess.c
+++ b/arch/s390/lib/uaccess.c
@@ -64,10 +64,13 @@ mm_segment_t enable_sacf_uaccess(void)
 {
 	mm_segment_t old_fs;
 	unsigned long asce, cr;
+	unsigned long flags;
 
 	old_fs = current->thread.mm_segment;
 	if (old_fs & 1)
 		return old_fs;
+	/* protect against a concurrent page table upgrade */
+	local_irq_save(flags);
 	current->thread.mm_segment |= 1;
 	asce = S390_lowcore.kernel_asce;
 	if (likely(old_fs == USER_DS)) {
@@ -83,6 +86,7 @@ mm_segment_t enable_sacf_uaccess(void)
 		__ctl_load(asce, 7, 7);
 		set_cpu_flag(CIF_ASCE_SECONDARY);
 	}
+	local_irq_restore(flags);
 	return old_fs;
 }
 EXPORT_SYMBOL(enable_sacf_uaccess);
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index ae989b740376..36bce727897b 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -245,7 +245,7 @@ static int cmm_skip_blanks(char *cp, char **endp)
 }
 
 static int cmm_pages_handler(struct ctl_table *ctl, int write,
-			     void __user *buffer, size_t *lenp, loff_t *ppos)
+			     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	long nr = cmm_get_pages();
 	struct ctl_table ctl_entry = {
@@ -264,7 +264,7 @@ static int cmm_pages_handler(struct ctl_table *ctl, int write,
 }
 
 static int cmm_timed_pages_handler(struct ctl_table *ctl, int write,
-				   void __user *buffer, size_t *lenp,
+				   void *buffer, size_t *lenp,
 				   loff_t *ppos)
 {
 	long nr = cmm_get_timed_pages();
@@ -284,7 +284,7 @@ static int cmm_timed_pages_handler(struct ctl_table *ctl, int write,
 }
 
 static int cmm_timeout_handler(struct ctl_table *ctl, int write,
-			       void __user *buffer, size_t *lenp, loff_t *ppos)
+			       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	char buf[64], *p;
 	long nr, seconds;
@@ -297,8 +297,7 @@ static int cmm_timeout_handler(struct ctl_table *ctl, int write,
 
 	if (write) {
 		len = min(*lenp, sizeof(buf));
-		if (copy_from_user(buf, buffer, len))
-			return -EFAULT;
+		memcpy(buf, buffer, len);
 		buf[len - 1] = '\0';
 		cmm_skip_blanks(buf, &p);
 		nr = simple_strtoul(p, &p, 0);
@@ -311,8 +310,7 @@ static int cmm_timeout_handler(struct ctl_table *ctl, int write,
 			      cmm_timeout_pages, cmm_timeout_seconds);
 		if (len > *lenp)
 			len = *lenp;
-		if (copy_to_user(buffer, buf, len))
-			return -EFAULT;
+		memcpy(buffer, buf, len);
 		*lenp = len;
 		*ppos += len;
 	}
diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index 1a95d8809cc3..4b6903fbba4a 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -788,19 +788,19 @@ static inline unsigned long *gmap_table_walk(struct gmap *gmap,
 					     unsigned long gaddr, int level)
 {
 	const int asce_type = gmap->asce & _ASCE_TYPE_MASK;
-	unsigned long *table;
+	unsigned long *table = gmap->table;
 
-	if ((gmap->asce & _ASCE_TYPE_MASK) + 4 < (level * 4))
-		return NULL;
 	if (gmap_is_shadow(gmap) && gmap->removed)
 		return NULL;
 
+	if (WARN_ON_ONCE(level > (asce_type >> 2) + 1))
+		return NULL;
+
 	if (asce_type != _ASCE_TYPE_REGION1 &&
 	    gaddr & (-1UL << (31 + (asce_type >> 2) * 11)))
 		return NULL;
 
-	table = gmap->table;
-	switch (gmap->asce & _ASCE_TYPE_MASK) {
+	switch (asce_type) {
 	case _ASCE_TYPE_REGION1:
 		table += (gaddr & _REGION1_INDEX) >> _REGION1_SHIFT;
 		if (level == 4)
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index f01daddcbc5e..242dfc0d462d 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -251,25 +251,15 @@ follow_huge_pud(struct mm_struct *mm, unsigned long address,
 	return pud_page(*pud) + ((address & ~PUD_MASK) >> PAGE_SHIFT);
 }
 
-static __init int setup_hugepagesz(char *opt)
+bool __init arch_hugetlb_valid_size(unsigned long size)
 {
-	unsigned long size;
-	char *string = opt;
-
-	size = memparse(opt, &opt);
-	if (MACHINE_HAS_EDAT1 && size == PMD_SIZE) {
-		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
-	} else if (MACHINE_HAS_EDAT2 && size == PUD_SIZE) {
-		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
-	} else {
-		hugetlb_bad_size();
-		pr_err("hugepagesz= specifies an unsupported page size %s\n",
-			string);
-		return 0;
-	}
-	return 1;
+	if (MACHINE_HAS_EDAT1 && size == PMD_SIZE)
+		return true;
+	else if (MACHINE_HAS_EDAT2 && size == PUD_SIZE)
+		return true;
+	else
+		return false;
 }
-__setup("hugepagesz=", setup_hugepagesz);
 
 static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
 		unsigned long addr, unsigned long len,
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 87b2d024e75a..b11bcf4da531 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -122,7 +122,7 @@ void __init paging_init(void)
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 	max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS);
 	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
-	free_area_init_nodes(max_zone_pfns);
+	free_area_init(max_zone_pfns);
 }
 
 void mark_rodata_ro(void)
diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c
index 498c98a312f4..fff169d64711 100644
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -70,8 +70,20 @@ static void __crst_table_upgrade(void *arg)
 {
 	struct mm_struct *mm = arg;
 
-	if (current->active_mm == mm)
-		set_user_asce(mm);
+	/* we must change all active ASCEs to avoid the creation of new TLBs */
+	if (current->active_mm == mm) {
+		S390_lowcore.user_asce = mm->context.asce;
+		if (current->thread.mm_segment == USER_DS) {
+			__ctl_load(S390_lowcore.user_asce, 1, 1);
+			/* Mark user-ASCE present in CR1 */
+			clear_cpu_flag(CIF_ASCE_PRIMARY);
+		}
+		if (current->thread.mm_segment == USER_DS_SACF) {
+			__ctl_load(S390_lowcore.user_asce, 7, 7);
+			/* enable_sacf_uaccess does all or nothing */
+			WARN_ON(!test_cpu_flag(CIF_ASCE_SECONDARY));
+		}
+	}
 	__tlb_flush_local();
 }
 
diff --git a/arch/s390/pci/Makefile b/arch/s390/pci/Makefile
index 748626a33028..b4e3c84772a1 100644
--- a/arch/s390/pci/Makefile
+++ b/arch/s390/pci/Makefile
@@ -4,4 +4,5 @@
 #
 
 obj-$(CONFIG_PCI)	+= pci.o pci_irq.o pci_dma.o pci_clp.o pci_sysfs.o \
-			   pci_event.o pci_debug.o pci_insn.o pci_mmio.o
+			   pci_event.o pci_debug.o pci_insn.o pci_mmio.o \
+			   pci_bus.o
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 94ca121933de..3f6670613c57 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -36,18 +36,21 @@
 #include <asm/pci_clp.h>
 #include <asm/pci_dma.h>
 
+#include "pci_bus.h"
+
 /* list of all detected zpci devices */
 static LIST_HEAD(zpci_list);
 static DEFINE_SPINLOCK(zpci_list_lock);
 
 static DECLARE_BITMAP(zpci_domain, ZPCI_DOMAIN_BITMAP_SIZE);
 static DEFINE_SPINLOCK(zpci_domain_lock);
-static unsigned int zpci_num_domains_allocated;
 
 #define ZPCI_IOMAP_ENTRIES						\
 	min(((unsigned long) ZPCI_NR_DEVICES * PCI_STD_NUM_BARS / 2),	\
 	    ZPCI_IOMAP_MAX_ENTRIES)
 
+unsigned int s390_pci_no_rid;
+
 static DEFINE_SPINLOCK(zpci_iomap_lock);
 static unsigned long *zpci_iomap_bitmap;
 struct zpci_iomap_entry *zpci_iomap_start;
@@ -88,17 +91,12 @@ void zpci_remove_reserved_devices(void)
 	spin_unlock(&zpci_list_lock);
 
 	list_for_each_entry_safe(zdev, tmp, &remove, entry)
-		zpci_remove_device(zdev);
-}
-
-static struct zpci_dev *get_zdev_by_bus(struct pci_bus *bus)
-{
-	return (bus && bus->sysdata) ? (struct zpci_dev *) bus->sysdata : NULL;
+		zpci_zdev_put(zdev);
 }
 
 int pci_domain_nr(struct pci_bus *bus)
 {
-	return ((struct zpci_dev *) bus->sysdata)->domain;
+	return ((struct zpci_bus *) bus->sysdata)->domain_nr;
 }
 EXPORT_SYMBOL_GPL(pci_domain_nr);
 
@@ -373,29 +371,17 @@ EXPORT_SYMBOL(pci_iounmap);
 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
 		    int size, u32 *val)
 {
-	struct zpci_dev *zdev = get_zdev_by_bus(bus);
-	int ret;
+	struct zpci_dev *zdev = get_zdev_by_bus(bus, devfn);
 
-	if (!zdev || devfn != ZPCI_DEVFN)
-		ret = -ENODEV;
-	else
-		ret = zpci_cfg_load(zdev, where, val, size);
-
-	return ret;
+	return (zdev) ? zpci_cfg_load(zdev, where, val, size) : -ENODEV;
 }
 
 static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 		     int size, u32 val)
 {
-	struct zpci_dev *zdev = get_zdev_by_bus(bus);
-	int ret;
+	struct zpci_dev *zdev = get_zdev_by_bus(bus, devfn);
 
-	if (!zdev || devfn != ZPCI_DEVFN)
-		ret = -ENODEV;
-	else
-		ret = zpci_cfg_store(zdev, where, val, size);
-
-	return ret;
+	return (zdev) ? zpci_cfg_store(zdev, where, val, size) : -ENODEV;
 }
 
 static struct pci_ops pci_root_ops = {
@@ -506,15 +492,15 @@ static struct resource *__alloc_res(struct zpci_dev *zdev, unsigned long start,
 	return r;
 }
 
-static int zpci_setup_bus_resources(struct zpci_dev *zdev,
-				    struct list_head *resources)
+int zpci_setup_bus_resources(struct zpci_dev *zdev,
+			     struct list_head *resources)
 {
 	unsigned long addr, size, flags;
 	struct resource *res;
 	int i, entry;
 
 	snprintf(zdev->res_name, sizeof(zdev->res_name),
-		 "PCI Bus %04x:%02x", zdev->domain, ZPCI_BUS_NR);
+		 "PCI Bus %04x:%02x", zdev->uid, ZPCI_BUS_NR);
 
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (!zdev->bars[i].size)
@@ -608,98 +594,53 @@ void pcibios_disable_device(struct pci_dev *pdev)
 	zpci_debug_exit_device(zdev);
 }
 
-static int zpci_alloc_domain(struct zpci_dev *zdev)
+static int __zpci_register_domain(int domain)
 {
 	spin_lock(&zpci_domain_lock);
-	if (zpci_num_domains_allocated > (ZPCI_NR_DEVICES - 1)) {
+	if (test_bit(domain, zpci_domain)) {
 		spin_unlock(&zpci_domain_lock);
-		pr_err("Adding PCI function %08x failed because the configured limit of %d is reached\n",
-			zdev->fid, ZPCI_NR_DEVICES);
-		return -ENOSPC;
+		pr_err("Domain %04x is already assigned\n", domain);
+		return -EEXIST;
 	}
+	set_bit(domain, zpci_domain);
+	spin_unlock(&zpci_domain_lock);
+	return domain;
+}
 
-	if (zpci_unique_uid) {
-		zdev->domain = (u16) zdev->uid;
-		if (zdev->domain == 0) {
-			pr_warn("UID checking is active but no UID is set for PCI function %08x, so automatic domain allocation is used instead\n",
-				zdev->fid);
-			update_uid_checking(false);
-			goto auto_allocate;
-		}
+static int __zpci_alloc_domain(void)
+{
+	int domain;
 
-		if (test_bit(zdev->domain, zpci_domain)) {
-			spin_unlock(&zpci_domain_lock);
-			pr_err("Adding PCI function %08x failed because domain %04x is already assigned\n",
-				zdev->fid, zdev->domain);
-			return -EEXIST;
-		}
-		set_bit(zdev->domain, zpci_domain);
-		zpci_num_domains_allocated++;
-		spin_unlock(&zpci_domain_lock);
-		return 0;
-	}
-auto_allocate:
+	spin_lock(&zpci_domain_lock);
 	/*
 	 * We can always auto allocate domains below ZPCI_NR_DEVICES.
 	 * There is either a free domain or we have reached the maximum in
 	 * which case we would have bailed earlier.
 	 */
-	zdev->domain = find_first_zero_bit(zpci_domain, ZPCI_NR_DEVICES);
-	set_bit(zdev->domain, zpci_domain);
-	zpci_num_domains_allocated++;
+	domain = find_first_zero_bit(zpci_domain, ZPCI_NR_DEVICES);
+	set_bit(domain, zpci_domain);
 	spin_unlock(&zpci_domain_lock);
-	return 0;
+	return domain;
 }
 
-static void zpci_free_domain(struct zpci_dev *zdev)
+int zpci_alloc_domain(int domain)
 {
-	spin_lock(&zpci_domain_lock);
-	clear_bit(zdev->domain, zpci_domain);
-	zpci_num_domains_allocated--;
-	spin_unlock(&zpci_domain_lock);
+	if (zpci_unique_uid) {
+		if (domain)
+			return __zpci_register_domain(domain);
+		pr_warn("UID checking was active but no UID is provided: switching to automatic domain allocation\n");
+		update_uid_checking(false);
+	}
+	return __zpci_alloc_domain();
 }
 
-void pcibios_remove_bus(struct pci_bus *bus)
+void zpci_free_domain(int domain)
 {
-	struct zpci_dev *zdev = get_zdev_by_bus(bus);
-
-	zpci_exit_slot(zdev);
-	zpci_cleanup_bus_resources(zdev);
-	zpci_destroy_iommu(zdev);
-	zpci_free_domain(zdev);
-
-	spin_lock(&zpci_list_lock);
-	list_del(&zdev->entry);
-	spin_unlock(&zpci_list_lock);
-
-	zpci_dbg(3, "rem fid:%x\n", zdev->fid);
-	kfree(zdev);
+	spin_lock(&zpci_domain_lock);
+	clear_bit(domain, zpci_domain);
+	spin_unlock(&zpci_domain_lock);
 }
 
-static int zpci_scan_bus(struct zpci_dev *zdev)
-{
-	LIST_HEAD(resources);
-	int ret;
-
-	ret = zpci_setup_bus_resources(zdev, &resources);
-	if (ret)
-		goto error;
-
-	zdev->bus = pci_scan_root_bus(NULL, ZPCI_BUS_NR, &pci_root_ops,
-				      zdev, &resources);
-	if (!zdev->bus) {
-		ret = -EIO;
-		goto error;
-	}
-	zdev->bus->max_bus_speed = zdev->max_bus_speed;
-	pci_bus_add_devices(zdev->bus);
-	return 0;
-
-error:
-	zpci_cleanup_bus_resources(zdev);
-	pci_free_resource_list(&resources);
-	return ret;
-}
 
 int zpci_enable_device(struct zpci_dev *zdev)
 {
@@ -734,13 +675,15 @@ int zpci_create_device(struct zpci_dev *zdev)
 {
 	int rc;
 
-	rc = zpci_alloc_domain(zdev);
-	if (rc)
-		goto out;
+	kref_init(&zdev->kref);
+
+	spin_lock(&zpci_list_lock);
+	list_add_tail(&zdev->entry, &zpci_list);
+	spin_unlock(&zpci_list_lock);
 
 	rc = zpci_init_iommu(zdev);
 	if (rc)
-		goto out_free;
+		goto out;
 
 	mutex_init(&zdev->lock);
 	if (zdev->state == ZPCI_FN_STATE_CONFIGURED) {
@@ -748,36 +691,59 @@ int zpci_create_device(struct zpci_dev *zdev)
 		if (rc)
 			goto out_destroy_iommu;
 	}
-	rc = zpci_scan_bus(zdev);
+
+	rc = zpci_bus_device_register(zdev, &pci_root_ops);
 	if (rc)
 		goto out_disable;
 
-	spin_lock(&zpci_list_lock);
-	list_add_tail(&zdev->entry, &zpci_list);
-	spin_unlock(&zpci_list_lock);
-
-	zpci_init_slot(zdev);
-
 	return 0;
 
 out_disable:
 	if (zdev->state == ZPCI_FN_STATE_ONLINE)
 		zpci_disable_device(zdev);
+
 out_destroy_iommu:
 	zpci_destroy_iommu(zdev);
-out_free:
-	zpci_free_domain(zdev);
 out:
+	spin_lock(&zpci_list_lock);
+	list_del(&zdev->entry);
+	spin_unlock(&zpci_list_lock);
 	return rc;
 }
 
-void zpci_remove_device(struct zpci_dev *zdev)
+void zpci_release_device(struct kref *kref)
 {
-	if (!zdev->bus)
-		return;
+	struct zpci_dev *zdev = container_of(kref, struct zpci_dev, kref);
+
+	if (zdev->zbus->bus) {
+		struct pci_dev *pdev;
+
+		pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn);
+		if (pdev)
+			pci_stop_and_remove_bus_device_locked(pdev);
+	}
+
+	switch (zdev->state) {
+	case ZPCI_FN_STATE_ONLINE:
+	case ZPCI_FN_STATE_CONFIGURED:
+		zpci_disable_device(zdev);
+		fallthrough;
+	case ZPCI_FN_STATE_STANDBY:
+		if (zdev->has_hp_slot)
+			zpci_exit_slot(zdev);
+		zpci_cleanup_bus_resources(zdev);
+		zpci_bus_device_unregister(zdev);
+		zpci_destroy_iommu(zdev);
+		fallthrough;
+	default:
+		break;
+	}
 
-	pci_stop_root_bus(zdev->bus);
-	pci_remove_root_bus(zdev->bus);
+	spin_lock(&zpci_list_lock);
+	list_del(&zdev->entry);
+	spin_unlock(&zpci_list_lock);
+	zpci_dbg(3, "rem fid:%x\n", zdev->fid);
+	kfree(zdev);
 }
 
 int zpci_report_error(struct pci_dev *pdev,
@@ -844,6 +810,10 @@ char * __init pcibios_setup(char *str)
 		s390_pci_force_floating = 1;
 		return NULL;
 	}
+	if (!strcmp(str, "norid")) {
+		s390_pci_no_rid = 1;
+		return NULL;
+	}
 	return str;
 }
 
diff --git a/arch/s390/pci/pci_bus.c b/arch/s390/pci/pci_bus.c
new file mode 100644
index 000000000000..542c6b8f56df
--- /dev/null
+++ b/arch/s390/pci/pci_bus.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright IBM Corp. 2020
+ *
+ * Author(s):
+ *   Pierre Morel <pmorel@linux.ibm.com>
+ *
+ */
+
+#define KMSG_COMPONENT "zpci"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/jump_label.h>
+#include <linux/pci.h>
+#include <linux/printk.h>
+
+#include <asm/pci_clp.h>
+#include <asm/pci_dma.h>
+
+#include "pci_bus.h"
+
+static LIST_HEAD(zbus_list);
+static DEFINE_SPINLOCK(zbus_list_lock);
+static int zpci_nb_devices;
+
+/* zpci_bus_scan
+ * @zbus: the zbus holding the zdevices
+ * @ops: the pci operations
+ *
+ * The domain number must be set before pci_scan_root_bus is called.
+ * This function can be called once the domain is known, hence
+ * when the function_0 is dicovered.
+ */
+static int zpci_bus_scan(struct zpci_bus *zbus, int domain, struct pci_ops *ops)
+{
+	struct pci_bus *bus;
+	int rc;
+
+	rc = zpci_alloc_domain(domain);
+	if (rc < 0)
+		return rc;
+	zbus->domain_nr = rc;
+
+	bus = pci_scan_root_bus(NULL, ZPCI_BUS_NR, ops, zbus, &zbus->resources);
+	if (!bus) {
+		zpci_free_domain(zbus->domain_nr);
+		return -EFAULT;
+	}
+
+	zbus->bus = bus;
+	pci_bus_add_devices(bus);
+	return 0;
+}
+
+static void zpci_bus_release(struct kref *kref)
+{
+	struct zpci_bus *zbus = container_of(kref, struct zpci_bus, kref);
+
+	if (zbus->bus) {
+		pci_lock_rescan_remove();
+		pci_stop_root_bus(zbus->bus);
+
+		zpci_free_domain(zbus->domain_nr);
+		pci_free_resource_list(&zbus->resources);
+
+		pci_remove_root_bus(zbus->bus);
+		pci_unlock_rescan_remove();
+	}
+
+	spin_lock(&zbus_list_lock);
+	list_del(&zbus->bus_next);
+	spin_unlock(&zbus_list_lock);
+	kfree(zbus);
+}
+
+static void zpci_bus_put(struct zpci_bus *zbus)
+{
+	kref_put(&zbus->kref, zpci_bus_release);
+}
+
+static struct zpci_bus *zpci_bus_get(int pchid)
+{
+	struct zpci_bus *zbus;
+
+	spin_lock(&zbus_list_lock);
+	list_for_each_entry(zbus, &zbus_list, bus_next) {
+		if (pchid == zbus->pchid) {
+			kref_get(&zbus->kref);
+			goto out_unlock;
+		}
+	}
+	zbus = NULL;
+out_unlock:
+	spin_unlock(&zbus_list_lock);
+	return zbus;
+}
+
+static struct zpci_bus *zpci_bus_alloc(int pchid)
+{
+	struct zpci_bus *zbus;
+
+	zbus = kzalloc(sizeof(*zbus), GFP_KERNEL);
+	if (!zbus)
+		return NULL;
+
+	zbus->pchid = pchid;
+	INIT_LIST_HEAD(&zbus->bus_next);
+	spin_lock(&zbus_list_lock);
+	list_add_tail(&zbus->bus_next, &zbus_list);
+	spin_unlock(&zbus_list_lock);
+
+	kref_init(&zbus->kref);
+	INIT_LIST_HEAD(&zbus->resources);
+
+	zbus->bus_resource.start = 0;
+	zbus->bus_resource.end = ZPCI_BUS_NR;
+	zbus->bus_resource.flags = IORESOURCE_BUS;
+	pci_add_resource(&zbus->resources, &zbus->bus_resource);
+
+	return zbus;
+}
+
+static int zpci_bus_add_device(struct zpci_bus *zbus, struct zpci_dev *zdev)
+{
+	struct pci_bus *bus;
+	struct resource_entry *window, *n;
+	struct resource *res;
+	struct pci_dev *pdev;
+	int rc;
+
+	bus = zbus->bus;
+	if (!bus)
+		return -EINVAL;
+
+	pdev = pci_get_slot(bus, zdev->devfn);
+	if (pdev) {
+		/* Device is already known. */
+		pci_dev_put(pdev);
+		return 0;
+	}
+
+	rc = zpci_init_slot(zdev);
+	if (rc)
+		return rc;
+	zdev->has_hp_slot = 1;
+
+	resource_list_for_each_entry_safe(window, n, &zbus->resources) {
+		res = window->res;
+		pci_bus_add_resource(bus, res, 0);
+	}
+
+	pdev = pci_scan_single_device(bus, zdev->devfn);
+	if (pdev) {
+		pdev->multifunction = 1;
+		pci_bus_add_device(pdev);
+	}
+
+	return 0;
+}
+
+static void zpci_bus_add_devices(struct zpci_bus *zbus)
+{
+	int i;
+
+	for (i = 1; i < ZPCI_FUNCTIONS_PER_BUS; i++)
+		if (zbus->function[i])
+			zpci_bus_add_device(zbus, zbus->function[i]);
+
+	pci_lock_rescan_remove();
+	pci_bus_add_devices(zbus->bus);
+	pci_unlock_rescan_remove();
+}
+
+int zpci_bus_device_register(struct zpci_dev *zdev, struct pci_ops *ops)
+{
+	struct zpci_bus *zbus = NULL;
+	int rc = -EBADF;
+
+	if (zpci_nb_devices == ZPCI_NR_DEVICES) {
+		pr_warn("Adding PCI function %08x failed because the configured limit of %d is reached\n",
+			zdev->fid, ZPCI_NR_DEVICES);
+		return -ENOSPC;
+	}
+	zpci_nb_devices++;
+
+	if (zdev->devfn >= ZPCI_FUNCTIONS_PER_BUS)
+		return -EINVAL;
+
+	if (!s390_pci_no_rid && zdev->rid_available)
+		zbus = zpci_bus_get(zdev->pchid);
+
+	if (!zbus) {
+		zbus = zpci_bus_alloc(zdev->pchid);
+		if (!zbus)
+			return -ENOMEM;
+	}
+
+	zdev->zbus = zbus;
+	if (zbus->function[zdev->devfn]) {
+		pr_err("devfn %04x is already assigned\n", zdev->devfn);
+		goto error; /* rc already set */
+	}
+	zbus->function[zdev->devfn] = zdev;
+
+	zpci_setup_bus_resources(zdev, &zbus->resources);
+
+	if (zbus->bus) {
+		if (!zbus->multifunction) {
+			WARN_ONCE(1, "zbus is not multifunction\n");
+			goto error_bus;
+		}
+		if (!zdev->rid_available) {
+			WARN_ONCE(1, "rid_available not set for multifunction\n");
+			goto error_bus;
+		}
+		rc = zpci_bus_add_device(zbus, zdev);
+		if (rc)
+			goto error_bus;
+	} else if (zdev->devfn == 0) {
+		if (zbus->multifunction && !zdev->rid_available) {
+			WARN_ONCE(1, "rid_available not set on function 0 for multifunction\n");
+			goto error_bus;
+		}
+		rc = zpci_bus_scan(zbus, (u16)zdev->uid, ops);
+		if (rc)
+			goto error_bus;
+		zpci_bus_add_devices(zbus);
+		rc = zpci_init_slot(zdev);
+		if (rc)
+			goto error_bus;
+		zdev->has_hp_slot = 1;
+		zbus->multifunction = zdev->rid_available;
+		zbus->max_bus_speed = zdev->max_bus_speed;
+	} else {
+		zbus->multifunction = 1;
+	}
+
+	return 0;
+
+error_bus:
+	zpci_nb_devices--;
+	zbus->function[zdev->devfn] = NULL;
+error:
+	pr_err("Adding PCI function %08x failed\n", zdev->fid);
+	zpci_bus_put(zbus);
+	return rc;
+}
+
+void zpci_bus_device_unregister(struct zpci_dev *zdev)
+{
+	struct zpci_bus *zbus = zdev->zbus;
+
+	zpci_nb_devices--;
+	zbus->function[zdev->devfn] = NULL;
+	zpci_bus_put(zbus);
+}
diff --git a/arch/s390/pci/pci_bus.h b/arch/s390/pci/pci_bus.h
new file mode 100644
index 000000000000..89be3c354b7b
--- /dev/null
+++ b/arch/s390/pci/pci_bus.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright IBM Corp. 2020
+ *
+ * Author(s):
+ *   Pierre Morel <pmorel@linux.ibm.com>
+ *
+ */
+
+int zpci_bus_device_register(struct zpci_dev *zdev, struct pci_ops *ops);
+void zpci_bus_device_unregister(struct zpci_dev *zdev);
+int zpci_bus_init(void);
+
+void zpci_release_device(struct kref *kref);
+static inline void zpci_zdev_put(struct zpci_dev *zdev)
+{
+	kref_put(&zdev->kref, zpci_release_device);
+}
+
+int zpci_alloc_domain(int domain);
+void zpci_free_domain(int domain);
+int zpci_setup_bus_resources(struct zpci_dev *zdev,
+			     struct list_head *resources);
+
+static inline struct zpci_dev *get_zdev_by_bus(struct pci_bus *bus,
+					       unsigned int devfn)
+{
+	struct zpci_bus *zbus = bus->sysdata;
+
+	return (devfn >= ZPCI_FUNCTIONS_PER_BUS) ? NULL : zbus->function[devfn];
+}
diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c
index ea794ae755ae..9b318824a134 100644
--- a/arch/s390/pci/pci_clp.c
+++ b/arch/s390/pci/pci_clp.c
@@ -155,8 +155,12 @@ static int clp_store_query_pci_fn(struct zpci_dev *zdev,
 	zdev->pfgid = response->pfgid;
 	zdev->pft = response->pft;
 	zdev->vfn = response->vfn;
+	zdev->port = response->port;
 	zdev->uid = response->uid;
 	zdev->fmb_length = sizeof(u32) * response->fmb_len;
+	zdev->rid_available = response->rid_avail;
+	if (!s390_pci_no_rid && zdev->rid_available)
+		zdev->devfn = response->rid & ZPCI_RID_MASK_DEVFN;
 
 	memcpy(zdev->pfip, response->pfip, sizeof(zdev->pfip));
 	if (response->util_str_avail) {
diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
index 8d6ee4af4230..08e1d619398e 100644
--- a/arch/s390/pci/pci_event.c
+++ b/arch/s390/pci/pci_event.c
@@ -14,6 +14,8 @@
 #include <asm/pci_debug.h>
 #include <asm/sclp.h>
 
+#include "pci_bus.h"
+
 /* Content Code Description for PCI Function Error */
 struct zpci_ccdf_err {
 	u32 reserved1;
@@ -53,7 +55,7 @@ static void __zpci_event_error(struct zpci_ccdf_err *ccdf)
 	zpci_err_hex(ccdf, sizeof(*ccdf));
 
 	if (zdev)
-		pdev = pci_get_slot(zdev->bus, ZPCI_DEVFN);
+		pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn);
 
 	pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n",
 	       pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid);
@@ -78,36 +80,28 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 	enum zpci_state state;
 	int ret;
 
-	if (zdev)
-		pdev = pci_get_slot(zdev->bus, ZPCI_DEVFN);
+	if (zdev && zdev->zbus && zdev->zbus->bus)
+		pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn);
 
-	pr_info("%s: Event 0x%x reconfigured PCI function 0x%x\n",
-		pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid);
 	zpci_err("avail CCDF:\n");
 	zpci_err_hex(ccdf, sizeof(*ccdf));
 
 	switch (ccdf->pec) {
 	case 0x0301: /* Reserved|Standby -> Configured */
 		if (!zdev) {
-			ret = clp_add_pci_device(ccdf->fid, ccdf->fh, 0);
-			if (ret)
-				break;
-			zdev = get_zdev_by_fid(ccdf->fid);
-		}
-		if (!zdev || zdev->state != ZPCI_FN_STATE_STANDBY)
+			ret = clp_add_pci_device(ccdf->fid, ccdf->fh, 1);
 			break;
-		zdev->state = ZPCI_FN_STATE_CONFIGURED;
+		}
 		zdev->fh = ccdf->fh;
-		ret = zpci_enable_device(zdev);
-		if (ret)
-			break;
-		pci_lock_rescan_remove();
-		pci_rescan_bus(zdev->bus);
-		pci_unlock_rescan_remove();
+		zdev->state = ZPCI_FN_STATE_CONFIGURED;
+		zpci_create_device(zdev);
 		break;
 	case 0x0302: /* Reserved -> Standby */
-		if (!zdev)
+		if (!zdev) {
 			clp_add_pci_device(ccdf->fid, ccdf->fh, 0);
+			break;
+		}
+		zdev->fh = ccdf->fh;
 		break;
 	case 0x0303: /* Deconfiguration requested */
 		if (!zdev)
@@ -135,12 +129,10 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 			pci_stop_and_remove_bus_device_locked(pdev);
 		}
 
-		zdev->fh = ccdf->fh;
-		zpci_disable_device(zdev);
 		zdev->state = ZPCI_FN_STATE_STANDBY;
 		if (!clp_get_state(ccdf->fid, &state) &&
 		    state == ZPCI_FN_STATE_RESERVED) {
-			zpci_remove_device(zdev);
+			zpci_zdev_put(zdev);
 		}
 		break;
 	case 0x0306: /* 0x308 or 0x302 for multiple devices */
@@ -149,12 +141,11 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 	case 0x0308: /* Standby -> Reserved */
 		if (!zdev)
 			break;
-		zpci_remove_device(zdev);
+		zpci_zdev_put(zdev);
 		break;
 	default:
 		break;
 	}
-	pci_dev_put(pdev);
 }
 
 void zpci_event_availability(void *data)
diff --git a/arch/s390/pci/pci_sysfs.c b/arch/s390/pci/pci_sysfs.c
index 215f17437a4f..5c028bee91b9 100644
--- a/arch/s390/pci/pci_sysfs.c
+++ b/arch/s390/pci/pci_sysfs.c
@@ -33,6 +33,7 @@ zpci_attr(pchid, "0x%04x\n", pchid);
 zpci_attr(pfgid, "0x%02x\n", pfgid);
 zpci_attr(vfn, "0x%04x\n", vfn);
 zpci_attr(pft, "0x%02x\n", pft);
+zpci_attr(port, "%d\n", port);
 zpci_attr(uid, "0x%x\n", uid);
 zpci_attr(segment0, "0x%02x\n", pfip[0]);
 zpci_attr(segment1, "0x%02x\n", pfip[1]);
@@ -88,7 +89,7 @@ static ssize_t recover_store(struct device *dev, struct device_attribute *attr,
 		ret = zpci_enable_device(zdev);
 		if (ret)
 			goto out;
-		pci_rescan_bus(zdev->bus);
+		pci_rescan_bus(zdev->zbus->bus);
 	}
 out:
 	pci_unlock_rescan_remove();
@@ -142,6 +143,7 @@ static struct attribute *zpci_dev_attrs[] = {
 	&dev_attr_pchid.attr,
 	&dev_attr_pfgid.attr,
 	&dev_attr_pft.attr,
+	&dev_attr_port.attr,
 	&dev_attr_vfn.attr,
 	&dev_attr_uid.attr,
 	&dev_attr_recover.attr,
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b4f0e37b83eb..be7c4f699113 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -9,7 +9,6 @@ config SUPERH
 	select CLKDEV_LOOKUP
 	select DMA_DECLARE_COHERENT
 	select HAVE_IDE if HAS_IOPORT_MAP
-	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_OPROFILE
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_PERF_EVENTS
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
index 2408ac4873aa..07ddf31124a3 100644
--- a/arch/sh/include/asm/cache.h
+++ b/arch/sh/include/asm/cache.h
@@ -15,7 +15,7 @@
 
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
-#define __read_mostly __attribute__((__section__(".data..read_mostly")))
+#define __read_mostly __section(.data..read_mostly)
 
 #ifndef __ASSEMBLY__
 struct cache_info {
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
index 5212f5fcd752..960545306afa 100644
--- a/arch/sh/include/asm/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
@@ -12,7 +12,9 @@ enum die_val {
 };
 
 /* arch/sh/kernel/dumpstack.c */
-extern void printk_address(unsigned long address, int reliable);
-extern void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+extern void printk_address(unsigned long address, int reliable,
+			   const char *loglvl);
+extern void dump_mem(const char *str, const char *loglvl,
+		     unsigned long bottom, unsigned long top);
 
 #endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/pgtable-2level.h b/arch/sh/include/asm/pgtable-2level.h
index bf1eb51c3ee5..08bff93927ff 100644
--- a/arch/sh/include/asm/pgtable-2level.h
+++ b/arch/sh/include/asm/pgtable-2level.h
@@ -2,7 +2,6 @@
 #ifndef __ASM_SH_PGTABLE_2LEVEL_H
 #define __ASM_SH_PGTABLE_2LEVEL_H
 
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
 /*
diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h
index 779260b721ca..0f80097e5c9c 100644
--- a/arch/sh/include/asm/pgtable-3level.h
+++ b/arch/sh/include/asm/pgtable-3level.h
@@ -2,7 +2,6 @@
 #ifndef __ASM_SH_PGTABLE_3LEVEL_H
 #define __ASM_SH_PGTABLE_3LEVEL_H
 
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopud.h>
 
 /*
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 29274f0e428e..4acce5f2cbf9 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -407,13 +407,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 /* to find an entry in a page-table-directory. */
 #define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
 #define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
-#define __pgd_offset(address)	pgd_index(address)
 
 /* to find an entry in a kernel page-table-directory */
 #define pgd_offset_k(address)	pgd_offset(&init_mm, address)
 
-#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
-#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+#define pud_index(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
 
 /* Find an entry in the third-level page table.. */
 #define pte_index(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
index 1778bc5971e7..27cc282ec6c0 100644
--- a/arch/sh/include/asm/pgtable_64.h
+++ b/arch/sh/include/asm/pgtable_64.h
@@ -46,14 +46,13 @@ static __inline__ void set_pte(pte_t *pteptr, pte_t pteval)
 
 /* To find an entry in a generic PGD. */
 #define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define __pgd_offset(address) pgd_index(address)
 #define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
 
 /* To find an entry in a kernel PGD. */
 #define pgd_offset_k(address) pgd_offset(&init_mm, address)
 
-#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
-#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+#define pud_index(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+/* #define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) */
 
 /*
  * PMD level access routines. Same notes as above.
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 0e0ecc0132e3..d44409413418 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -171,7 +171,7 @@ static __inline__ void enable_fpu(void)
 #define thread_saved_pc(tsk)	(tsk->thread.pc)
 
 void show_trace(struct task_struct *tsk, unsigned long *sp,
-		struct pt_regs *regs);
+		struct pt_regs *regs, const char *loglvl);
 
 #ifdef CONFIG_DUMP_CODE
 void show_code(struct pt_regs *regs);
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 59673f8a3379..ef65f0625c6c 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -47,5 +47,3 @@ obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
 obj-$(CONFIG_DMA_NONCOHERENT)	+= dma-coherent.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
-
-ccflags-y := -Werror
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 934ff84844fa..d432164b23b7 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -103,7 +103,8 @@ static int __sq_remap(struct sq_mapping *map, pgprot_t prot)
 #if defined(CONFIG_MMU)
 	struct vm_struct *vma;
 
-	vma = __get_vm_area(map->size, VM_ALLOC, map->sq_addr, SQ_ADDRMAX);
+	vma = __get_vm_area_caller(map->size, VM_ALLOC, map->sq_addr,
+			SQ_ADDRMAX, __builtin_return_address(0));
 	if (!vma)
 		return -ENOMEM;
 
diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
index 9f1c9c11d62d..a13c045804ed 100644
--- a/arch/sh/kernel/dumpstack.c
+++ b/arch/sh/kernel/dumpstack.c
@@ -16,36 +16,37 @@
 #include <asm/unwinder.h>
 #include <asm/stacktrace.h>
 
-void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+void dump_mem(const char *str, const char *loglvl,
+	      unsigned long bottom, unsigned long top)
 {
 	unsigned long p;
 	int i;
 
-	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+	printk("%s%s(0x%08lx to 0x%08lx)\n", loglvl, str, bottom, top);
 
 	for (p = bottom & ~31; p < top; ) {
-		printk("%04lx: ", p & 0xffff);
+		printk("%s%04lx: ", loglvl,  p & 0xffff);
 
 		for (i = 0; i < 8; i++, p += 4) {
 			unsigned int val;
 
 			if (p < bottom || p >= top)
-				printk("         ");
+				printk("%s         ", loglvl);
 			else {
 				if (__get_user(val, (unsigned int __user *)p)) {
-					printk("\n");
+					printk("%s\n", loglvl);
 					return;
 				}
-				printk("%08x ", val);
+				printk("%s%08x ", loglvl, val);
 			}
 		}
-		printk("\n");
+		printk("%s\n", loglvl);
 	}
 }
 
-void printk_address(unsigned long address, int reliable)
+void printk_address(unsigned long address, int reliable, const char *loglvl)
 {
-	printk(" [<%p>] %s%pS\n", (void *) address,
+	printk("%s [<%p>] %s%pS\n", loglvl, (void *) address,
 			reliable ? "" : "? ", (void *) address);
 }
 
@@ -117,8 +118,7 @@ static int print_trace_stack(void *data, char *name)
  */
 static void print_trace_address(void *data, unsigned long addr, int reliable)
 {
-	printk("%s", (char *)data);
-	printk_address(addr, reliable);
+	printk_address(addr, reliable, (char *)data);
 }
 
 static const struct stacktrace_ops print_trace_ops = {
@@ -127,16 +127,16 @@ static const struct stacktrace_ops print_trace_ops = {
 };
 
 void show_trace(struct task_struct *tsk, unsigned long *sp,
-		struct pt_regs *regs)
+		struct pt_regs *regs, const char *loglvl)
 {
 	if (regs && user_mode(regs))
 		return;
 
-	printk("\nCall trace:\n");
+	printk("%s\nCall trace:\n", loglvl);
 
-	unwind_stack(tsk, regs, sp, &print_trace_ops, "");
+	unwind_stack(tsk, regs, sp, &print_trace_ops, (void *)loglvl);
 
-	printk("\n");
+	printk("%s\n", loglvl);
 
 	if (!tsk)
 		tsk = current;
@@ -144,7 +144,7 @@ void show_trace(struct task_struct *tsk, unsigned long *sp,
 	debug_show_held_locks(tsk);
 }
 
-void show_stack(struct task_struct *tsk, unsigned long *sp)
+void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 {
 	unsigned long stack;
 
@@ -156,7 +156,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 		sp = (unsigned long *)tsk->thread.sp;
 
 	stack = (unsigned long)sp;
-	dump_mem("Stack: ", stack, THREAD_SIZE +
+	dump_mem("Stack: ", loglvl, stack, THREAD_SIZE +
 		 (unsigned long)task_stack_page(tsk));
-	show_trace(tsk, sp, NULL);
+	show_trace(tsk, sp, NULL, loglvl);
 }
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 60c828a2b8a2..037aab2708b7 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -136,6 +136,7 @@ EXPORT_SYMBOL_GPL(match_trapped_io_handler);
 static struct trapped_io *lookup_tiop(unsigned long address)
 {
 	pgd_t *pgd_k;
+	p4d_t *p4d_k;
 	pud_t *pud_k;
 	pmd_t *pmd_k;
 	pte_t *pte_k;
@@ -145,7 +146,11 @@ static struct trapped_io *lookup_tiop(unsigned long address)
 	if (!pgd_present(*pgd_k))
 		return NULL;
 
-	pud_k = pud_offset(pgd_k, address);
+	p4d_k = p4d_offset(pgd_k, address);
+	if (!p4d_present(*p4d_k))
+		return NULL;
+
+	pud_k = pud_offset(p4d_k, address);
 	if (!pud_present(*pud_k))
 		return NULL;
 
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index a094633874c3..456cc8d171f7 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -59,7 +59,7 @@ void show_regs(struct pt_regs * regs)
 	printk("MACH: %08lx MACL: %08lx GBR : %08lx PR  : %08lx\n",
 	       regs->mach, regs->macl, regs->gbr, regs->pr);
 
-	show_trace(NULL, (unsigned long *)regs->regs[15], regs);
+	show_trace(NULL, (unsigned long *)regs->regs[15], regs, KERN_DEFAULT);
 	show_code(regs);
 }
 
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index c2844a2e18cd..4c2144225c8e 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -275,13 +275,12 @@ void show_regs(struct pt_regs *regs)
 	 * If we're in kernel mode, dump the stack too..
 	 */
 	if (!user_mode(regs)) {
-		void show_stack(struct task_struct *tsk, unsigned long *sp);
 		unsigned long sp = regs->regs[15] & 0xffffffff;
 		struct task_struct *tsk = get_current();
 
 		tsk->thread.kregs = regs;
 
-		show_stack(tsk, (unsigned long *)sp);
+		show_stack(tsk, (unsigned long *)sp, KERN_DEFAULT);
 	}
 }
 
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 282774472603..5858936cb431 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -38,6 +38,13 @@ DECLARE_EXPORT(__ashlsi3);
 DECLARE_EXPORT(__lshrsi3_r0);
 DECLARE_EXPORT(__ashrsi3_r0);
 DECLARE_EXPORT(__ashlsi3_r0);
+
+DECLARE_EXPORT(__ashiftrt_r4_0);
+DECLARE_EXPORT(__ashiftrt_r4_1);
+DECLARE_EXPORT(__ashiftrt_r4_2);
+DECLARE_EXPORT(__ashiftrt_r4_3);
+DECLARE_EXPORT(__ashiftrt_r4_4);
+DECLARE_EXPORT(__ashiftrt_r4_5);
 DECLARE_EXPORT(__ashiftrt_r4_6);
 DECLARE_EXPORT(__ashiftrt_r4_7);
 DECLARE_EXPORT(__ashiftrt_r4_8);
@@ -48,13 +55,23 @@ DECLARE_EXPORT(__ashiftrt_r4_12);
 DECLARE_EXPORT(__ashiftrt_r4_13);
 DECLARE_EXPORT(__ashiftrt_r4_14);
 DECLARE_EXPORT(__ashiftrt_r4_15);
+DECLARE_EXPORT(__ashiftrt_r4_16);
+DECLARE_EXPORT(__ashiftrt_r4_17);
+DECLARE_EXPORT(__ashiftrt_r4_18);
+DECLARE_EXPORT(__ashiftrt_r4_19);
 DECLARE_EXPORT(__ashiftrt_r4_20);
 DECLARE_EXPORT(__ashiftrt_r4_21);
 DECLARE_EXPORT(__ashiftrt_r4_22);
 DECLARE_EXPORT(__ashiftrt_r4_23);
 DECLARE_EXPORT(__ashiftrt_r4_24);
+DECLARE_EXPORT(__ashiftrt_r4_25);
+DECLARE_EXPORT(__ashiftrt_r4_26);
 DECLARE_EXPORT(__ashiftrt_r4_27);
+DECLARE_EXPORT(__ashiftrt_r4_28);
+DECLARE_EXPORT(__ashiftrt_r4_29);
 DECLARE_EXPORT(__ashiftrt_r4_30);
+DECLARE_EXPORT(__ashiftrt_r4_31);
+DECLARE_EXPORT(__ashiftrt_r4_32);
 DECLARE_EXPORT(__movstr);
 DECLARE_EXPORT(__movstrSI8);
 DECLARE_EXPORT(__movstrSI12);
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
index c7a30fcd135f..e69d98040777 100644
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ b/arch/sh/kernel/syscalls/syscall.tbl
@@ -440,3 +440,4 @@
 # 435 reserved for clone3
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
+439	common	process_madvise			sys_process_madvise
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 63cf17bc760d..faad65409075 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -38,8 +38,8 @@ void die(const char *str, struct pt_regs *regs, long err)
 			task_pid_nr(current), task_stack_page(current) + 1);
 
 	if (!user_mode(regs) || in_interrupt())
-		dump_mem("Stack: ", regs->regs[15], THREAD_SIZE +
-			 (unsigned long)task_stack_page(current));
+		dump_mem("Stack: ", KERN_DEFAULT, regs->regs[15],
+			THREAD_SIZE + (unsigned long)task_stack_page(current));
 
 	notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV);
 
diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c
index dad8e6a54906..540e670dbafc 100644
--- a/arch/sh/lib/delay.c
+++ b/arch/sh/lib/delay.c
@@ -29,6 +29,7 @@ void __delay(unsigned long loops)
 		: "0" (loops)
 		: "t");
 }
+EXPORT_SYMBOL(__delay);
 
 inline void __const_udelay(unsigned long xloops)
 {
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index eee911422cf9..45943bcb7042 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -209,6 +209,7 @@ static void sh4_flush_cache_page(void *args)
 	unsigned long address, pfn, phys;
 	int map_coherent = 0;
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -224,7 +225,8 @@ static void sh4_flush_cache_page(void *args)
 		return;
 
 	pgd = pgd_offset(vma->vm_mm, address);
-	pud = pud_offset(pgd, address);
+	p4d = p4d_offset(pgd, address);
+	pud = pud_offset(p4d, address);
 	pmd = pmd_offset(pud, address);
 	pte = pte_offset_kernel(pmd, address);
 
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 445b5e69b73c..442a77cc2957 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -383,6 +383,7 @@ static void sh64_dcache_purge_user_pages(struct mm_struct *mm,
 				unsigned long addr, unsigned long end)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -397,7 +398,11 @@ static void sh64_dcache_purge_user_pages(struct mm_struct *mm,
 	if (pgd_bad(*pgd))
 		return;
 
-	pud = pud_offset(pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	if (p4d_none(*p4d) || p4d_bad(*p4d))
+		return;
+
+	pud = pud_offset(p4d, addr);
 	if (pud_none(*pud) || pud_bad(*pud))
 		return;
 
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 5f23d7907597..1185954bc9d6 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -47,12 +47,13 @@ static void show_pte(struct mm_struct *mm, unsigned long addr)
 			pgd = swapper_pg_dir;
 	}
 
-	printk(KERN_ALERT "pgd = %p\n", pgd);
+	pr_alert("pgd = %p\n", pgd);
 	pgd += pgd_index(addr);
-	printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr,
-	       (u32)(sizeof(*pgd) * 2), (u64)pgd_val(*pgd));
+	pr_alert("[%08lx] *pgd=%0*llx", addr, (u32)(sizeof(*pgd) * 2),
+		 (u64)pgd_val(*pgd));
 
 	do {
+		p4d_t *p4d;
 		pud_t *pud;
 		pmd_t *pmd;
 		pte_t *pte;
@@ -61,33 +62,46 @@ static void show_pte(struct mm_struct *mm, unsigned long addr)
 			break;
 
 		if (pgd_bad(*pgd)) {
-			printk("(bad)");
+			pr_cont("(bad)");
 			break;
 		}
 
-		pud = pud_offset(pgd, addr);
+		p4d = p4d_offset(pgd, addr);
+		if (PTRS_PER_P4D != 1)
+			pr_cont(", *p4d=%0*Lx", (u32)(sizeof(*p4d) * 2),
+			        (u64)p4d_val(*p4d));
+
+		if (p4d_none(*p4d))
+			break;
+
+		if (p4d_bad(*p4d)) {
+			pr_cont("(bad)");
+			break;
+		}
+
+		pud = pud_offset(p4d, addr);
 		if (PTRS_PER_PUD != 1)
-			printk(", *pud=%0*Lx", (u32)(sizeof(*pud) * 2),
-			       (u64)pud_val(*pud));
+			pr_cont(", *pud=%0*llx", (u32)(sizeof(*pud) * 2),
+				(u64)pud_val(*pud));
 
 		if (pud_none(*pud))
 			break;
 
 		if (pud_bad(*pud)) {
-			printk("(bad)");
+			pr_cont("(bad)");
 			break;
 		}
 
 		pmd = pmd_offset(pud, addr);
 		if (PTRS_PER_PMD != 1)
-			printk(", *pmd=%0*Lx", (u32)(sizeof(*pmd) * 2),
-			       (u64)pmd_val(*pmd));
+			pr_cont(", *pmd=%0*llx", (u32)(sizeof(*pmd) * 2),
+				(u64)pmd_val(*pmd));
 
 		if (pmd_none(*pmd))
 			break;
 
 		if (pmd_bad(*pmd)) {
-			printk("(bad)");
+			pr_cont("(bad)");
 			break;
 		}
 
@@ -96,17 +110,18 @@ static void show_pte(struct mm_struct *mm, unsigned long addr)
 			break;
 
 		pte = pte_offset_kernel(pmd, addr);
-		printk(", *pte=%0*Lx", (u32)(sizeof(*pte) * 2),
-		       (u64)pte_val(*pte));
+		pr_cont(", *pte=%0*llx", (u32)(sizeof(*pte) * 2),
+			(u64)pte_val(*pte));
 	} while (0);
 
-	printk("\n");
+	pr_cont("\n");
 }
 
 static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 {
 	unsigned index = pgd_index(address);
 	pgd_t *pgd_k;
+	p4d_t *p4d, *p4d_k;
 	pud_t *pud, *pud_k;
 	pmd_t *pmd, *pmd_k;
 
@@ -116,8 +131,13 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 	if (!pgd_present(*pgd_k))
 		return NULL;
 
-	pud = pud_offset(pgd, address);
-	pud_k = pud_offset(pgd_k, address);
+	p4d = p4d_offset(pgd, address);
+	p4d_k = p4d_offset(pgd_k, address);
+	if (!p4d_present(*p4d_k))
+		return NULL;
+
+	pud = pud_offset(p4d, address);
+	pud_k = pud_offset(p4d_k, address);
 	if (!pud_present(*pud_k))
 		return NULL;
 
@@ -188,15 +208,12 @@ show_fault_oops(struct pt_regs *regs, unsigned long address)
 	if (!oops_may_print())
 		return;
 
-	printk(KERN_ALERT "BUG: unable to handle kernel ");
-	if (address < PAGE_SIZE)
-		printk(KERN_CONT "NULL pointer dereference");
-	else
-		printk(KERN_CONT "paging request");
-
-	printk(KERN_CONT " at %08lx\n", address);
-	printk(KERN_ALERT "PC:");
-	printk_address(regs->pc, 1);
+	pr_alert("BUG: unable to handle kernel %s at %08lx\n",
+		 address < PAGE_SIZE ? "NULL pointer dereference"
+				     : "paging request",
+		 address);
+	pr_alert("PC:");
+	printk_address(regs->pc, 1, KERN_ALERT);
 
 	show_pte(NULL, address);
 }
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index 960deb1f24a1..acd5652a0de3 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -26,17 +26,21 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte = NULL;
 
 	pgd = pgd_offset(mm, addr);
 	if (pgd) {
-		pud = pud_alloc(mm, pgd, addr);
-		if (pud) {
-			pmd = pmd_alloc(mm, pud, addr);
-			if (pmd)
-				pte = pte_alloc_map(mm, pmd, addr);
+		p4d = p4d_alloc(mm, pgd, addr);
+		if (p4d) {
+			pud = pud_alloc(mm, p4d, addr);
+			if (pud) {
+				pmd = pmd_alloc(mm, pud, addr);
+				if (pmd)
+					pte = pte_alloc_map(mm, pmd, addr);
+			}
 		}
 	}
 
@@ -47,17 +51,21 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 		       unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte = NULL;
 
 	pgd = pgd_offset(mm, addr);
 	if (pgd) {
-		pud = pud_offset(pgd, addr);
-		if (pud) {
-			pmd = pmd_offset(pud, addr);
-			if (pmd)
-				pte = pte_offset_map(pmd, addr);
+		p4d = p4d_offset(pgd, addr);
+		if (p4d) {
+			pud = pud_offset(p4d, addr);
+			if (pud) {
+				pmd = pmd_offset(pud, addr);
+				if (pmd)
+					pte = pte_offset_map(pmd, addr);
+			}
 		}
 	}
 
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 8d2a68aea1fc..a70ba0fdd0b3 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -45,6 +45,7 @@ void __init __weak plat_mem_setup(void)
 static pte_t *__get_pte_phys(unsigned long addr)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 
@@ -54,7 +55,13 @@ static pte_t *__get_pte_phys(unsigned long addr)
 		return NULL;
 	}
 
-	pud = pud_alloc(NULL, pgd, addr);
+	p4d = p4d_alloc(NULL, pgd, addr);
+	if (unlikely(!p4d)) {
+		p4d_ERROR(*p4d);
+		return NULL;
+	}
+
+	pud = pud_alloc(NULL, p4d, addr);
 	if (unlikely(!pud)) {
 		pud_ERROR(*pud);
 		return NULL;
@@ -172,9 +179,9 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
 	unsigned long vaddr;
 
 	vaddr = start;
-	i = __pgd_offset(vaddr);
-	j = __pud_offset(vaddr);
-	k = __pmd_offset(vaddr);
+	i = pgd_index(vaddr);
+	j = pud_index(vaddr);
+	k = pmd_index(vaddr);
 	pgd = pgd_base + i;
 
 	for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
@@ -334,7 +341,7 @@ void __init paging_init(void)
 
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
-	free_area_init_nodes(max_zone_pfns);
+	free_area_init(max_zone_pfns);
 }
 
 unsigned int mem_init_done = 0;
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index 9e6b38b03cf7..0e7039137f5a 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -15,7 +15,7 @@
 #include <asm/cacheflush.h>
 
 #define kmap_get_fixmap_pte(vaddr)                                     \
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+	pte_offset_kernel(pmd_offset(pud_offset(p4d_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)), vaddr)
 
 static pte_t *kmap_coherent_pte;
 
diff --git a/arch/sh/mm/tlbex_32.c b/arch/sh/mm/tlbex_32.c
index 382262dc0c4b..1c53868632ee 100644
--- a/arch/sh/mm/tlbex_32.c
+++ b/arch/sh/mm/tlbex_32.c
@@ -23,6 +23,7 @@ handle_tlbmiss(struct pt_regs *regs, unsigned long error_code,
 	       unsigned long address)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -42,7 +43,10 @@ handle_tlbmiss(struct pt_regs *regs, unsigned long error_code,
 		pgd = pgd_offset(current->mm, address);
 	}
 
-	pud = pud_offset(pgd, address);
+	p4d = p4d_offset(pgd, address);
+	if (p4d_none_or_clear_bad(p4d))
+		return 1;
+	pud = pud_offset(p4d, address);
 	if (pud_none_or_clear_bad(pud))
 		return 1;
 	pmd = pmd_offset(pud, address);
diff --git a/arch/sh/mm/tlbex_64.c b/arch/sh/mm/tlbex_64.c
index 8ff966dd0c74..0d015f7556fa 100644
--- a/arch/sh/mm/tlbex_64.c
+++ b/arch/sh/mm/tlbex_64.c
@@ -44,6 +44,7 @@ static int handle_tlbmiss(unsigned long long protection_flags,
 			  unsigned long address)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -58,7 +59,11 @@ static int handle_tlbmiss(unsigned long long protection_flags,
 		pgd = pgd_offset(current->mm, address);
 	}
 
-	pud = pud_offset(pgd, address);
+	p4d = p4d_offset(pgd, address);
+	if (p4d_none(*p4d) || !p4d_present(*p4d))
+		return 1;
+
+	pud = pud_offset(p4d, address);
 	if (pud_none(*pud) || !pud_present(*pud))
 		return 1;
 
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index da515fdad83d..0e4f3891b904 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -65,7 +65,6 @@ config SPARC64
 	select HAVE_KRETPROBES
 	select HAVE_KPROBES
 	select MMU_GATHER_RCU_TABLE_FREE if SMP
-	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
@@ -287,15 +286,6 @@ config NODES_SHIFT
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accommodate various tables.
 
-# Some NUMA nodes have memory ranges that span
-# other nodes.  Even though a pfn is valid and
-# between a node's start and end pfns, it may not
-# reside on that node.  See memmap_init_zone()
-# for details.
-config NODES_SPAN_OTHER_NODES
-	def_bool y
-	depends on NEED_MULTIPLE_NODES
-
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y if SPARC64
 	select SPARSEMEM_VMEMMAP_ENABLE
diff --git a/arch/sparc/kernel/cpumap.c b/arch/sparc/kernel/cpumap.c
index 1cb62bfeaa1f..f07ea88a83af 100644
--- a/arch/sparc/kernel/cpumap.c
+++ b/arch/sparc/kernel/cpumap.c
@@ -50,7 +50,7 @@ struct cpuinfo_tree {
 
 	/* Offsets into nodes[] for each level of the tree */
 	struct cpuinfo_level level[CPUINFO_LVL_MAX];
-	struct cpuinfo_node  nodes[0];
+	struct cpuinfo_node  nodes[];
 };
 
 
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 75232cbd58bf..522e5b51050c 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -87,7 +87,7 @@ struct ds_reg_req {
 	__u64			handle;
 	__u16			major;
 	__u16			minor;
-	char			svc_id[0];
+	char			svc_id[];
 };
 
 struct ds_reg_ack {
@@ -701,12 +701,12 @@ struct ds_var_hdr {
 
 struct ds_var_set_msg {
 	struct ds_var_hdr		hdr;
-	char				name_and_value[0];
+	char				name_and_value[];
 };
 
 struct ds_var_delete_msg {
 	struct ds_var_hdr		hdr;
-	char				name[0];
+	char				name[];
 };
 
 struct ds_var_resp {
@@ -989,7 +989,7 @@ struct ds_queue_entry {
 	struct ds_info			*dp;
 	int				req_len;
 	int				__pad;
-	u64				req[0];
+	u64				req[];
 };
 
 static void process_ds_work(void)
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 26cca65e9246..65c0d5207b0c 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -145,10 +145,10 @@ void show_regs(struct pt_regs *r)
 }
 
 /*
- * The show_stack is an external API which we do not use ourselves.
+ * The show_stack() is external API which we do not use ourselves.
  * The oops is printed in die_if_kernel.
  */
-void show_stack(struct task_struct *tsk, unsigned long *_ksp)
+void show_stack(struct task_struct *tsk, unsigned long *_ksp, const char *loglvl)
 {
 	unsigned long pc, fp;
 	unsigned long task_base;
@@ -170,11 +170,11 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 			break;
 		rw = (struct reg_window32 *) fp;
 		pc = rw->ins[7];
-		printk("[%08lx : ", pc);
-		printk("%pS ] ", (void *) pc);
+		printk("%s[%08lx : ", loglvl, pc);
+		printk("%s%pS ] ", loglvl, (void *) pc);
 		fp = rw->ins[6];
 	} while (++count < 16);
-	printk("\n");
+	printk("%s\n", loglvl);
 }
 
 /*
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 4282116e28e7..b2e3fe729b7e 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -195,7 +195,7 @@ void show_regs(struct pt_regs *regs)
 	       regs->u_regs[15]);
 	printk("RPC: <%pS>\n", (void *) regs->u_regs[15]);
 	show_regwindow(regs);
-	show_stack(current, (unsigned long *) regs->u_regs[UREG_FP]);
+	show_stack(current, (unsigned long *)regs->u_regs[UREG_FP], KERN_DEFAULT);
 }
 
 union global_cpu_snapshot global_cpu_snapshot[NR_CPUS];
diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl
index f13615ecdecc..bff349fcba0d 100644
--- a/arch/sparc/kernel/syscalls/syscall.tbl
+++ b/arch/sparc/kernel/syscalls/syscall.tbl
@@ -483,3 +483,4 @@
 # 435 reserved for clone3
 437	common	openat2			sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
+439	common	process_madvise			sys_process_madvise		compat_sys_process_madvise
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 27778b65a965..96d92f107551 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/kallsyms.h>
 #include <linux/kdebug.h>
 #include <linux/ftrace.h>
 #include <linux/reboot.h>
@@ -2452,7 +2453,7 @@ static void user_instruction_dump(unsigned int __user *pc)
 	printk("\n");
 }
 
-void show_stack(struct task_struct *tsk, unsigned long *_ksp)
+void show_stack(struct task_struct *tsk, unsigned long *_ksp, const char *loglvl)
 {
 	unsigned long fp, ksp;
 	struct thread_info *tp;
@@ -2476,7 +2477,7 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 
 	fp = ksp + STACK_BIAS;
 
-	printk("Call Trace:\n");
+	printk("%sCall Trace:\n", loglvl);
 	do {
 		struct sparc_stackf *sf;
 		struct pt_regs *regs;
@@ -2497,14 +2498,14 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 			fp = (unsigned long)sf->fp + STACK_BIAS;
 		}
 
-		printk(" [%016lx] %pS\n", pc, (void *) pc);
+		print_ip_sym(loglvl, pc);
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 		if ((pc + 8UL) == (unsigned long) &return_to_handler) {
 			struct ftrace_ret_stack *ret_stack;
 			ret_stack = ftrace_graph_get_ret_stack(tsk, graph);
 			if (ret_stack) {
 				pc = ret_stack->ret;
-				printk(" [%016lx] %pS\n", pc, (void *) pc);
+				print_ip_sym(loglvl, pc);
 				graph++;
 			}
 		}
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 1cf0d666dea3..5774529ceb43 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -325,23 +325,12 @@ static void __update_mmu_tsb_insert(struct mm_struct *mm, unsigned long tsb_inde
 }
 
 #ifdef CONFIG_HUGETLB_PAGE
-static void __init add_huge_page_size(unsigned long size)
-{
-	unsigned int order;
-
-	if (size_to_hstate(size))
-		return;
-
-	order = ilog2(size) - PAGE_SHIFT;
-	hugetlb_add_hstate(order);
-}
-
 static int __init hugetlbpage_init(void)
 {
-	add_huge_page_size(1UL << HPAGE_64K_SHIFT);
-	add_huge_page_size(1UL << HPAGE_SHIFT);
-	add_huge_page_size(1UL << HPAGE_256MB_SHIFT);
-	add_huge_page_size(1UL << HPAGE_2GB_SHIFT);
+	hugetlb_add_hstate(HPAGE_64K_SHIFT - PAGE_SHIFT);
+	hugetlb_add_hstate(HPAGE_SHIFT - PAGE_SHIFT);
+	hugetlb_add_hstate(HPAGE_256MB_SHIFT - PAGE_SHIFT);
+	hugetlb_add_hstate(HPAGE_2GB_SHIFT - PAGE_SHIFT);
 
 	return 0;
 }
@@ -360,16 +349,11 @@ static void __init pud_huge_patch(void)
 	__asm__ __volatile__("flush %0" : : "r" (addr));
 }
 
-static int __init setup_hugepagesz(char *string)
+bool __init arch_hugetlb_valid_size(unsigned long size)
 {
-	unsigned long long hugepage_size;
-	unsigned int hugepage_shift;
+	unsigned int hugepage_shift = ilog2(size);
 	unsigned short hv_pgsz_idx;
 	unsigned int hv_pgsz_mask;
-	int rc = 0;
-
-	hugepage_size = memparse(string, &string);
-	hugepage_shift = ilog2(hugepage_size);
 
 	switch (hugepage_shift) {
 	case HPAGE_16GB_SHIFT:
@@ -397,20 +381,11 @@ static int __init setup_hugepagesz(char *string)
 		hv_pgsz_mask = 0;
 	}
 
-	if ((hv_pgsz_mask & cpu_pgsz_mask) == 0U) {
-		hugetlb_bad_size();
-		pr_err("hugepagesz=%llu not supported by MMU.\n",
-			hugepage_size);
-		goto out;
-	}
+	if ((hv_pgsz_mask & cpu_pgsz_mask) == 0U)
+		return false;
 
-	add_huge_page_size(hugepage_size);
-	rc = 1;
-
-out:
-	return rc;
+	return true;
 }
-__setup("hugepagesz=", setup_hugepagesz);
 #endif	/* CONFIG_HUGETLB_PAGE */
 
 void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
@@ -2488,7 +2463,7 @@ void __init paging_init(void)
 
 		max_zone_pfns[ZONE_NORMAL] = end_pfn;
 
-		free_area_init_nodes(max_zone_pfns);
+		free_area_init(max_zone_pfns);
 	}
 
 	printk("Booting Linux...\n");
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index b7c94de70cca..cc071dd7d8da 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -1008,24 +1008,13 @@ void __init srmmu_paging_init(void)
 	kmap_init();
 
 	{
-		unsigned long zones_size[MAX_NR_ZONES];
-		unsigned long zholes_size[MAX_NR_ZONES];
-		unsigned long npages;
-		int znum;
+		unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
-		for (znum = 0; znum < MAX_NR_ZONES; znum++)
-			zones_size[znum] = zholes_size[znum] = 0;
+		max_zone_pfn[ZONE_DMA] = max_low_pfn;
+		max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
+		max_zone_pfn[ZONE_HIGHMEM] = highend_pfn;
 
-		npages = max_low_pfn - pfn_base;
-
-		zones_size[ZONE_DMA] = npages;
-		zholes_size[ZONE_DMA] = npages - pages_avail;
-
-		npages = highend_pfn - max_low_pfn;
-		zones_size[ZONE_HIGHMEM] = npages;
-		zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
-
-		free_area_init_node(0, zones_size, pfn_base, zholes_size);
+		free_area_init(max_zone_pfn);
 	}
 }
 
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 30575bd92975..a2e680f7d39f 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -648,7 +648,7 @@ static void stack_proc(void *arg)
 {
 	struct task_struct *task = arg;
 
-	show_stack(task, NULL);
+	show_stack(task, NULL, KERN_INFO);
 }
 
 /*
diff --git a/arch/um/drivers/vector_kern.h b/arch/um/drivers/vector_kern.h
index d0159082faf0..8fff93a75a92 100644
--- a/arch/um/drivers/vector_kern.h
+++ b/arch/um/drivers/vector_kern.h
@@ -129,7 +129,7 @@ struct vector_private {
 	struct vector_estats estats;
 	struct sock_fprog *bpf;
 
-	char user[0];
+	char user[];
 };
 
 extern int build_transport_data(struct vector_private *vp);
diff --git a/arch/um/drivers/vector_user.h b/arch/um/drivers/vector_user.h
index 91f35b266aba..d29d5fdd98fa 100644
--- a/arch/um/drivers/vector_user.h
+++ b/arch/um/drivers/vector_user.h
@@ -17,7 +17,7 @@
 #define TRANS_TAP_LEN strlen(TRANS_TAP)
 
 #define TRANS_GRE "gre"
-#define TRANS_GRE_LEN strlen(TRANS_RAW)
+#define TRANS_GRE_LEN strlen(TRANS_GRE)
 
 #define TRANS_L2TPV3 "l2tpv3"
 #define TRANS_L2TPV3_LEN strlen(TRANS_L2TPV3)
diff --git a/arch/um/drivers/vhost_user.h b/arch/um/drivers/vhost_user.h
index 6c71b6005177..6f147cd3c9f7 100644
--- a/arch/um/drivers/vhost_user.h
+++ b/arch/um/drivers/vhost_user.h
@@ -78,7 +78,7 @@ struct vhost_user_config {
 	u32 offset;
 	u32 size;
 	u32 flags;
-	u8 payload[0]; /* Variable length */
+	u8 payload[]; /* Variable length */
 } __packed;
 
 struct vhost_user_vring_state {
diff --git a/arch/um/include/asm/xor.h b/arch/um/include/asm/xor.h
index 7a3208c47cfc..36b33d62a35d 100644
--- a/arch/um/include/asm/xor.h
+++ b/arch/um/include/asm/xor.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <asm-generic/xor.h>
-#include <shared/timer-internal.h>
+#include <linux/time-internal.h>
 
 /* pick an arbitrary one - measuring isn't possible with inf-cpu */
 #define XOR_SELECT_TEMPLATE(x)	\
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 30885d0b94ac..401b22f14743 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -158,8 +158,8 @@ static void __init fixaddr_user_init( void)
 
 void __init paging_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES], vaddr;
-	int i;
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
+	unsigned long vaddr;
 
 	empty_zero_page = (unsigned long *) memblock_alloc_low(PAGE_SIZE,
 							       PAGE_SIZE);
@@ -167,12 +167,8 @@ void __init paging_init(void)
 		panic("%s: Failed to allocate %lu bytes align=%lx\n",
 		      __func__, PAGE_SIZE, PAGE_SIZE);
 
-	for (i = 0; i < ARRAY_SIZE(zones_size); i++)
-		zones_size[i] = 0;
-
-	zones_size[ZONE_NORMAL] = (end_iomem >> PAGE_SHIFT) -
-		(uml_physmem >> PAGE_SHIFT);
-	free_area_init(zones_size);
+	max_zone_pfn[ZONE_NORMAL] = end_iomem >> PAGE_SHIFT;
+	free_area_init(max_zone_pfn);
 
 	/*
 	 * Fixed mappings, only the page table structure has to be
diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c
index 0a12d5a09217..3d91f89fd852 100644
--- a/arch/um/kernel/skas/syscall.c
+++ b/arch/um/kernel/skas/syscall.c
@@ -11,6 +11,7 @@
 #include <sysdep/ptrace_user.h>
 #include <sysdep/syscalls.h>
 #include <linux/time-internal.h>
+#include <asm/unistd.h>
 
 void handle_syscall(struct uml_pt_regs *r)
 {
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index c71b5ef7ea8c..acbc879d2773 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -17,7 +17,9 @@
 
 static void _print_addr(void *data, unsigned long address, int reliable)
 {
-	pr_info(" [<%08lx>] %s%pS\n", address, reliable ? "" : "? ",
+	const char *loglvl = data;
+
+	printk("%s [<%08lx>] %s%pS\n", loglvl, address, reliable ? "" : "? ",
 		(void *)address);
 }
 
@@ -25,9 +27,9 @@ static const struct stacktrace_ops stackops = {
 	.address = _print_addr
 };
 
-void show_stack(struct task_struct *task, unsigned long *stack)
+void show_stack(struct task_struct *task, unsigned long *stack,
+		       const char *loglvl)
 {
-	unsigned long *sp = stack;
 	struct pt_regs *segv_regs = current->thread.segv_regs;
 	int i;
 
@@ -38,20 +40,19 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	}
 
 	if (!stack)
-		sp = get_stack_pointer(task, segv_regs);
+		stack = get_stack_pointer(task, segv_regs);
 
-	pr_info("Stack:\n");
-	stack = sp;
+	printk("%sStack:\n", loglvl);
 	for (i = 0; i < 3 * STACKSLOTS_PER_LINE; i++) {
 		if (kstack_end(stack))
 			break;
 		if (i && ((i % STACKSLOTS_PER_LINE) == 0))
-			pr_cont("\n");
+			printk("%s\n", loglvl);
 		pr_cont(" %08lx", *stack++);
 	}
-	pr_cont("\n");
+	printk("%s\n", loglvl);
 
-	pr_info("Call Trace:\n");
-	dump_trace(current, &stackops, NULL);
-	pr_info("\n");
+	printk("%sCall Trace:\n", loglvl);
+	dump_trace(current, &stackops, (void *)loglvl);
+	printk("%s\n", loglvl);
 }
diff --git a/arch/unicore32/include/asm/memory.h b/arch/unicore32/include/asm/memory.h
index 23c93105f98f..66285178dd9b 100644
--- a/arch/unicore32/include/asm/memory.h
+++ b/arch/unicore32/include/asm/memory.h
@@ -60,7 +60,7 @@
 #ifndef __ASSEMBLY__
 
 #ifndef arch_adjust_zones
-#define arch_adjust_zones(size, holes) do { } while (0)
+#define arch_adjust_zones(max_zone_pfn) do { } while (0)
 #endif
 
 /*
diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h
index 3b8731b3a937..826f49edd94e 100644
--- a/arch/unicore32/include/asm/pgtable.h
+++ b/arch/unicore32/include/asm/pgtable.h
@@ -9,7 +9,6 @@
 #ifndef __UNICORE_PGTABLE_H__
 #define __UNICORE_PGTABLE_H__
 
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 #include <asm/cpu-single.h>
 
diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h
index 2b527cedd03d..b4e6035cb9a3 100644
--- a/arch/unicore32/include/mach/memory.h
+++ b/arch/unicore32/include/mach/memory.h
@@ -25,10 +25,10 @@
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
 
-void puv3_pci_adjust_zones(unsigned long *size, unsigned long *holes);
+void puv3_pci_adjust_zones(unsigned long *max_zone_pfn);
 
-#define arch_adjust_zones(size, holes) \
-	puv3_pci_adjust_zones(size, holes)
+#define arch_adjust_zones(max_zone_pfn) \
+	puv3_pci_adjust_zones(max_zone_pfn)
 
 #endif
 
diff --git a/arch/unicore32/kernel/hibernate.c b/arch/unicore32/kernel/hibernate.c
index f3812245cc00..ccad051a79b6 100644
--- a/arch/unicore32/kernel/hibernate.c
+++ b/arch/unicore32/kernel/hibernate.c
@@ -33,9 +33,11 @@ struct swsusp_arch_regs swsusp_arch_regs_cpu0;
 static pmd_t *resume_one_md_table_init(pgd_t *pgd)
 {
 	pud_t *pud;
+	p4d_t *p4d;
 	pmd_t *pmd_table;
 
-	pud = pud_offset(pgd, 0);
+	p4d = p4d_offset(pgd, 0);
+	pud = pud_offset(p4d, 0);
 	pmd_table = pmd_offset(pud, 0);
 
 	return pmd_table;
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
index efa04a94dcdb..0d098aa05b47 100644
--- a/arch/unicore32/kernel/pci.c
+++ b/arch/unicore32/kernel/pci.c
@@ -133,21 +133,11 @@ static int pci_puv3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init puv3_pci_adjust_zones(unsigned long *zone_size,
-	unsigned long *zhole_size)
+void __init puv3_pci_adjust_zones(unsigned long max_zone_pfn)
 {
 	unsigned int sz = SZ_128M >> PAGE_SHIFT;
 
-	/*
-	 * Only adjust if > 128M on current system
-	 */
-	if (zone_size[0] <= sz)
-		return;
-
-	zone_size[1] = zone_size[0] - sz;
-	zone_size[0] = sz;
-	zhole_size[1] = zhole_size[0];
-	zhole_size[0] = 0;
+	max_zone_pfn[ZONE_DMA] = sz;
 }
 
 /*
diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h
index e40d3603c7e7..967352323185 100644
--- a/arch/unicore32/kernel/setup.h
+++ b/arch/unicore32/kernel/setup.h
@@ -29,7 +29,7 @@ extern void kernel_thread_helper(void);
 extern void __init early_signal_init(void);
 
 extern asmlinkage void __backtrace(void);
-extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+extern asmlinkage void c_backtrace(unsigned long fp, const char *loglvl);
 
 extern void __show_regs(struct pt_regs *);
 
diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
index e24f67283864..a3ac01df1a2e 100644
--- a/arch/unicore32/kernel/traps.c
+++ b/arch/unicore32/kernel/traps.c
@@ -135,44 +135,42 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 	set_fs(fs);
 }
 
-static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+			   const char *loglvl)
 {
-	unsigned int fp, mode;
+	unsigned int fp;
 	int ok = 1;
 
-	printk(KERN_DEFAULT "Backtrace: ");
+	printk("%sBacktrace: ", loglvl);
 
 	if (!tsk)
 		tsk = current;
 
-	if (regs) {
+	if (regs)
 		fp = regs->UCreg_fp;
-		mode = processor_mode(regs);
-	} else if (tsk != current) {
+	else if (tsk != current)
 		fp = thread_saved_fp(tsk);
-		mode = 0x10;
-	} else {
+	else
 		asm("mov %0, fp" : "=r" (fp) : : "cc");
-		mode = 0x10;
-	}
 
 	if (!fp) {
-		printk("no frame pointer");
+		printk("%sno frame pointer", loglvl);
 		ok = 0;
 	} else if (verify_stack(fp)) {
-		printk("invalid frame pointer 0x%08x", fp);
+		printk("%sinvalid frame pointer 0x%08x", loglvl, fp);
 		ok = 0;
 	} else if (fp < (unsigned long)end_of_stack(tsk))
-		printk("frame pointer underflow");
-	printk("\n");
+		printk("%sframe pointer underflow", loglvl);
+	printk("%s\n", loglvl);
 
 	if (ok)
-		c_backtrace(fp, mode);
+		c_backtrace(fp, loglvl);
 }
 
-void show_stack(struct task_struct *tsk, unsigned long *sp)
+void show_stack(struct task_struct *tsk, unsigned long *sp,
+		       const char *loglvl)
 {
-	dump_backtrace(NULL, tsk);
+	dump_backtrace(NULL, tsk, loglvl);
 	barrier();
 }
 
@@ -200,7 +198,7 @@ static int __die(const char *str, int err, struct thread_info *thread,
 	if (!user_mode(regs) || in_interrupt()) {
 		dump_mem(KERN_EMERG, "Stack: ", regs->UCreg_sp,
 			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
-		dump_backtrace(regs, tsk);
+		dump_backtrace(regs, tsk, KERN_EMERG);
 		dump_instr(KERN_EMERG, regs);
 	}
 
diff --git a/arch/unicore32/lib/backtrace.S b/arch/unicore32/lib/backtrace.S
index f303671e2a4e..6221944b81f3 100644
--- a/arch/unicore32/lib/backtrace.S
+++ b/arch/unicore32/lib/backtrace.S
@@ -16,6 +16,7 @@
 #define sv_fp	v5
 #define sv_pc	v6
 #define offset	v8
+#define loglvl	v9
 
 ENTRY(__backtrace)
 		mov	r0, fp
@@ -27,10 +28,11 @@ ENTRY(c_backtrace)
 ENDPROC(__backtrace)
 ENDPROC(c_backtrace)
 #else
-		stm.w	(v4 - v8, lr), [sp-]	@ Save an extra register
+		stm.w	(v4 - v10, lr), [sp-]	@ Save an extra register
 						@ so we have a location...
 		mov.a	frame, r0		@ if frame pointer is zero
 		beq	no_frame		@ we have no stack frames
+		mov	loglvl, r1
 
 1:		stm.w	(pc), [sp-]		@ calculate offset of PC stored
 		ldw.w	r0, [sp]+, #4		@ by stmfd for this CPU
@@ -95,9 +97,10 @@ for_each_frame:
 		bua	for_each_frame
 
 1006:		adr	r0, .Lbad
-		mov	r1, frame
+		mov	r1, loglvl
+		mov	r2, frame
 		b.l	printk
-no_frame:	ldm.w	(v4 - v8, pc), [sp]+
+no_frame:	ldm.w	(v4 - v10, pc), [sp]+
 ENDPROC(__backtrace)
 ENDPROC(c_backtrace)
 
@@ -128,8 +131,11 @@ ENDPROC(c_backtrace)
 		add	v7, v7, #1
 		cxor.a	v7, #6
 		cmoveq	v7, #1
-		cmoveq	r1, #'\n'
-		cmovne	r1, #' '
+		bne	201f
+		adr	r0, .Lcr
+		mov	r1, loglvl
+		b.l	printk
+201:
 		ldw.w	r3, [stack]+, #-4
 		mov	r2, reg
 		csub.a	r2, #8
@@ -141,18 +147,20 @@ ENDPROC(c_backtrace)
 		add	r2, r2, #0x10		@ so r2 need add 16
 201:
 		adr	r0, .Lfp
+		mov	r1, loglvl
 		b.l	printk
 2:		sub.a	reg, reg, #1
 		bns	1b
 		cxor.a	v7, #0
 		beq	201f
 		adr	r0, .Lcr
+		mov	r1, loglvl
 		b.l	printk
 201:		ldm.w	(instr, reg, stack, v7, pc), [sp]+
 
-.Lfp:		.asciz	"%cr%d:%08x"
-.Lcr:		.asciz	"\n"
-.Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
+.Lfp:		.asciz	"%sr%d:%08x "
+.Lcr:		.asciz	"%s\n"
+.Lbad:		.asciz	"%sBacktrace aborted due to bad frame pointer <%p>\n"
 		.align
 .Ldsi:		.word	0x92eec000 >> 14	@ stm.w sp, (... fp, ip, lr, pc)
 		.word	0x92e10000 >> 14	@ stm.w sp, ()
diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c
index 6cf010fadc7a..52425d383cea 100644
--- a/arch/unicore32/mm/init.c
+++ b/arch/unicore32/mm/init.c
@@ -61,46 +61,21 @@ static void __init find_limits(unsigned long *min, unsigned long *max_low,
 	}
 }
 
-static void __init uc32_bootmem_free(unsigned long min, unsigned long max_low,
-	unsigned long max_high)
+static void __init uc32_bootmem_free(unsigned long max_low)
 {
-	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	struct memblock_region *reg;
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
-	/*
-	 * initialise the zones.
-	 */
-	memset(zone_size, 0, sizeof(zone_size));
-
-	/*
-	 * The memory size has already been determined.  If we need
-	 * to do anything fancy with the allocation of this memory
-	 * to the zones, now is the time to do it.
-	 */
-	zone_size[0] = max_low - min;
-
-	/*
-	 * Calculate the size of the holes.
-	 *  holes = node_size - sum(bank_sizes)
-	 */
-	memcpy(zhole_size, zone_size, sizeof(zhole_size));
-	for_each_memblock(memory, reg) {
-		unsigned long start = memblock_region_memory_base_pfn(reg);
-		unsigned long end = memblock_region_memory_end_pfn(reg);
-
-		if (start < max_low) {
-			unsigned long low_end = min(end, max_low);
-			zhole_size[0] -= low_end - start;
-		}
-	}
+	max_zone_pfn[ZONE_DMA] = max_low;
+	max_zone_pfn[ZONE_NORMAL] = max_low;
 
 	/*
 	 * Adjust the sizes according to any special requirements for
 	 * this machine type.
+	 * This might lower ZONE_DMA limit.
 	 */
-	arch_adjust_zones(zone_size, zhole_size);
+	arch_adjust_zones(max_zone_pfn);
 
-	free_area_init_node(0, zone_size, min, zhole_size);
+	free_area_init(max_zone_pfn);
 }
 
 int pfn_valid(unsigned long pfn)
@@ -176,11 +151,11 @@ void __init bootmem_init(void)
 	sparse_init();
 
 	/*
-	 * Now free the memory - free_area_init_node needs
+	 * Now free the memory - free_area_init needs
 	 * the sparse mem_map arrays initialized by sparse_init()
 	 * for memmap_init_zone(), otherwise all PFNs are invalid.
 	 */
-	uc32_bootmem_free(min, max_low, max_high);
+	uc32_bootmem_free(max_low);
 
 	high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1197b5596d5a..8d4554460d42 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -59,6 +59,7 @@ config X86
 	select ARCH_CLOCKSOURCE_INIT
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
 	select ARCH_HAS_DEBUG_VIRTUAL
+	select ARCH_HAS_DEBUG_VM_PGTABLE	if !X86_PAE
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FAST_MULTIPLIER
@@ -80,6 +81,7 @@ config X86
 	select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
 	select ARCH_HAS_SYSCALL_WRAPPER
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
+	select ARCH_HAS_DEBUG_WX
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_MIGHT_HAVE_ACPI_PDC		if ACPI
 	select ARCH_MIGHT_HAVE_PC_PARPORT
@@ -91,6 +93,7 @@ config X86
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
+	select ARCH_USE_SYM_ANNOTATIONS
 	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
 	select ARCH_WANT_DEFAULT_BPF_JIT	if X86_64
 	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
@@ -138,6 +141,7 @@ config X86
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
 	select HAVE_ARCH_KASAN			if X86_64
 	select HAVE_ARCH_KASAN_VMALLOC		if X86_64
+	select HAVE_ARCH_KCSAN			if X86_64
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS		if MMU
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if MMU && COMPAT
@@ -190,7 +194,6 @@ config X86
 	select HAVE_KRETPROBES
 	select HAVE_KVM
 	select HAVE_LIVEPATCH			if X86_64
-	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_MIXED_BREAKPOINTS_REGS
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_MOVE_PMD
@@ -229,6 +232,7 @@ config X86
 	select THREAD_INFO_IN_TASK
 	select USER_STACKTRACE_SUPPORT
 	select VIRT_TO_BUS
+	select HAVE_ARCH_KCSAN			if X86_64
 	select X86_FEATURE_NAMES		if PROC_FS
 	select PROC_PID_ARCH_STATUS		if PROC_FS
 	imply IMA_SECURE_AND_OR_TRUSTED_BOOT    if EFI
@@ -595,7 +599,7 @@ config X86_INTEL_MID
 	select I2C
 	select DW_APB_TIMER
 	select APB_TIMER
-	select INTEL_SCU_IPC
+	select INTEL_SCU_PCI
 	select MFD_INTEL_MSIC
 	---help---
 	  Select to build a kernel capable of supporting Intel MID (Mobile
@@ -1520,6 +1524,7 @@ config X86_CPA_STATISTICS
 config AMD_MEM_ENCRYPT
 	bool "AMD Secure Memory Encryption (SME) support"
 	depends on X86_64 && CPU_SUP_AMD
+	select DMA_COHERENT_POOL
 	select DYNAMIC_PHYSICAL_MASK
 	select ARCH_USE_MEMREMAP_PROT
 	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
@@ -1582,15 +1587,6 @@ config X86_64_ACPI_NUMA
 	---help---
 	  Enable ACPI SRAT based node topology detection.
 
-# Some NUMA nodes have memory ranges that span
-# other nodes.  Even though a pfn is valid and
-# between a node's start and end pfns, it may not
-# reside on that node.  See memmap_init_zone()
-# for details.
-config NODES_SPAN_OTHER_NODES
-	def_bool y
-	depends on X86_64_ACPI_NUMA
-
 config NUMA_EMU
 	bool "NUMA emulation"
 	depends on NUMA
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 2e74690b028a..fdf1431ac8c2 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -72,42 +72,6 @@ config EFI_PGT_DUMP
 	  issues with the mapping of the EFI runtime regions into that
 	  table.
 
-config DEBUG_WX
-	bool "Warn on W+X mappings at boot"
-	select PTDUMP_CORE
-	---help---
-	  Generate a warning if any W+X mappings are found at boot.
-
-	  This is useful for discovering cases where the kernel is leaving
-	  W+X mappings after applying NX, as such mappings are a security risk.
-
-	  Look for a message in dmesg output like this:
-
-	    x86/mm: Checked W+X mappings: passed, no W+X pages found.
-
-	  or like this, if the check failed:
-
-	    x86/mm: Checked W+X mappings: FAILED, <N> W+X pages found.
-
-	  Note that even if the check fails, your kernel is possibly
-	  still fine, as W+X mappings are not a security hole in
-	  themselves, what they do is that they make the exploitation
-	  of other unfixed kernel bugs easier.
-
-	  There is no runtime or memory usage effect of this option
-	  once the kernel has booted up - it's a one time check.
-
-	  If in doubt, say "Y".
-
-config DOUBLEFAULT
-	default y
-	bool "Enable doublefault exception handler" if EXPERT && X86_32
-	---help---
-	  This option allows trapping of rare doublefault exceptions that
-	  would otherwise cause a system to silently reboot. Disabling this
-	  option saves about 4k and might cause you much additional grey
-	  hair.
-
 config DEBUG_TLBFLUSH
 	bool "Set upper limit of TLB entries to flush one-by-one"
 	depends on DEBUG_KERNEL
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index b65ec63c7db7..38d3eec5062e 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -1,6 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 # Unified Makefile for i386 and x86_64
 
+#  Check the compiler
+sane_compiler := $(shell $(srctree)/scripts/x86-check-compiler.sh $(CC))
+$(if $(sane_compiler),$(error $(CC) check failed. Aborting),)
+
 # select defconfig based on actual architecture
 ifeq ($(ARCH),x86)
   ifeq ($(shell uname -m),x86_64)
@@ -246,7 +250,7 @@ drivers-$(CONFIG_FB) += arch/x86/video/
 
 boot := arch/x86/boot
 
-BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
+BOOT_TARGETS = bzdisk fdimage fdimage144 fdimage288 isoimage
 
 PHONY += bzImage $(BOOT_TARGETS)
 
@@ -267,8 +271,8 @@ endif
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
-PHONY += install
-install:
+PHONY += install bzlilo
+install bzlilo:
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
 PHONY += vdso_install
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index e17be90ab312..fe605205b4ce 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -9,7 +9,9 @@
 # Changed by many, many contributors over the years.
 #
 
+# Sanitizer runtimes are unavailable and cannot be linked for early boot code.
 KASAN_SANITIZE			:= n
+KCSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
 
 # Kernel does not boot with kcov instrumentation here.
@@ -57,11 +59,10 @@ $(obj)/cpu.o: $(obj)/cpustr.h
 
 quiet_cmd_cpustr = CPUSTR  $@
       cmd_cpustr = $(obj)/mkcpustr > $@
-targets += cpustr.h
 $(obj)/cpustr.h: $(obj)/mkcpustr FORCE
 	$(call if_changed,cpustr)
 endif
-clean-files += cpustr.h
+targets += cpustr.h
 
 # ---------------------------------------------------------------------------
 
@@ -129,6 +130,8 @@ quiet_cmd_genimage = GENIMAGE $3
 cmd_genimage = sh $(srctree)/$(src)/genimage.sh $2 $3 $(obj)/bzImage \
 			$(obj)/mtools.conf '$(image_cmdline)' $(FDINITRD)
 
+PHONY += bzdisk fdimage fdimage144 fdimage288 isoimage bzlilo install
+
 # This requires write access to /dev/fd0
 bzdisk: $(obj)/bzImage $(obj)/mtools.conf
 	$(call cmd,genimage,bzdisk,/dev/fd0)
@@ -146,7 +149,7 @@ isoimage: $(obj)/bzImage
 	$(call cmd,genimage,isoimage,$(obj)/image.iso)
 	@$(kecho) 'Kernel: $(obj)/image.iso is ready'
 
-bzlilo: $(obj)/bzImage
+bzlilo:
 	if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
 	if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
 	cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 5f7c262bcc99..7619742f91c9 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -17,7 +17,9 @@
 #	(see scripts/Makefile.lib size_append)
 #	compressed vmlinux.bin.all + u32 size of vmlinux.bin.all
 
+# Sanitizer runtimes are unavailable and cannot be linked for early boot code.
 KASAN_SANITIZE			:= n
+KCSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
 
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index 508cfa6828c5..0dc5c2b9614b 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -52,6 +52,7 @@ SECTIONS
 		_data = . ;
 		*(.data)
 		*(.data.*)
+		*(.bss.efistub)
 		_edata = . ;
 	}
 	. = ALIGN(L1_CACHE_BYTES);
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 0789e13ece90..1c7f13bb6728 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -98,13 +98,6 @@ For 32-bit we have the following conventions - kernel is built with
 #define SIZEOF_PTREGS	21*8
 
 .macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax save_ret=0
-	/*
-	 * Push registers and sanitize registers of values that a
-	 * speculation attack might otherwise want to exploit. The
-	 * lower registers are likely clobbered well before they
-	 * could be put to use in a speculative execution gadget.
-	 * Interleave XOR with PUSH for better uop scheduling:
-	 */
 	.if \save_ret
 	pushq	%rsi		/* pt_regs->si */
 	movq	8(%rsp), %rsi	/* temporarily store the return address in %rsi */
@@ -114,34 +107,43 @@ For 32-bit we have the following conventions - kernel is built with
 	pushq   %rsi		/* pt_regs->si */
 	.endif
 	pushq	\rdx		/* pt_regs->dx */
-	xorl	%edx, %edx	/* nospec   dx */
 	pushq   %rcx		/* pt_regs->cx */
-	xorl	%ecx, %ecx	/* nospec   cx */
 	pushq   \rax		/* pt_regs->ax */
 	pushq   %r8		/* pt_regs->r8 */
-	xorl	%r8d, %r8d	/* nospec   r8 */
 	pushq   %r9		/* pt_regs->r9 */
-	xorl	%r9d, %r9d	/* nospec   r9 */
 	pushq   %r10		/* pt_regs->r10 */
-	xorl	%r10d, %r10d	/* nospec   r10 */
 	pushq   %r11		/* pt_regs->r11 */
-	xorl	%r11d, %r11d	/* nospec   r11*/
 	pushq	%rbx		/* pt_regs->rbx */
-	xorl    %ebx, %ebx	/* nospec   rbx*/
 	pushq	%rbp		/* pt_regs->rbp */
-	xorl    %ebp, %ebp	/* nospec   rbp*/
 	pushq	%r12		/* pt_regs->r12 */
-	xorl	%r12d, %r12d	/* nospec   r12*/
 	pushq	%r13		/* pt_regs->r13 */
-	xorl	%r13d, %r13d	/* nospec   r13*/
 	pushq	%r14		/* pt_regs->r14 */
-	xorl	%r14d, %r14d	/* nospec   r14*/
 	pushq	%r15		/* pt_regs->r15 */
-	xorl	%r15d, %r15d	/* nospec   r15*/
 	UNWIND_HINT_REGS
+
 	.if \save_ret
 	pushq	%rsi		/* return address on top of stack */
 	.endif
+
+	/*
+	 * Sanitize registers of values that a speculation attack might
+	 * otherwise want to exploit. The lower registers are likely clobbered
+	 * well before they could be put to use in a speculative execution
+	 * gadget.
+	 */
+	xorl	%edx,  %edx	/* nospec dx  */
+	xorl	%ecx,  %ecx	/* nospec cx  */
+	xorl	%r8d,  %r8d	/* nospec r8  */
+	xorl	%r9d,  %r9d	/* nospec r9  */
+	xorl	%r10d, %r10d	/* nospec r10 */
+	xorl	%r11d, %r11d	/* nospec r11 */
+	xorl	%ebx,  %ebx	/* nospec rbx */
+	xorl	%ebp,  %ebp	/* nospec rbp */
+	xorl	%r12d, %r12d	/* nospec r12 */
+	xorl	%r13d, %r13d	/* nospec r13 */
+	xorl	%r14d, %r14d	/* nospec r14 */
+	xorl	%r15d, %r15d	/* nospec r15 */
+
 .endm
 
 .macro POP_REGS pop_rdi=1 skip_r11rcx=0
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index b67bae7091d7..5c9c7eee6325 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1536,7 +1536,6 @@ SYM_CODE_START(debug)
 	jmp	common_exception
 SYM_CODE_END(debug)
 
-#ifdef CONFIG_DOUBLEFAULT
 SYM_CODE_START(double_fault)
 1:
 	/*
@@ -1576,7 +1575,6 @@ SYM_CODE_START(double_fault)
 	hlt
 	jmp 1b
 SYM_CODE_END(double_fault)
-#endif
 
 /*
  * NMI is doubly nasty.  It can happen on the first instruction of
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 0e9504fabe52..3063aa9090f9 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -249,7 +249,6 @@ SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL)
 	 */
 syscall_return_via_sysret:
 	/* rcx and r11 are already restored (see code above) */
-	UNWIND_HINT_EMPTY
 	POP_REGS pop_rdi=0 skip_r11rcx=1
 
 	/*
@@ -258,6 +257,7 @@ syscall_return_via_sysret:
 	 */
 	movq	%rsp, %rdi
 	movq	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
+	UNWIND_HINT_EMPTY
 
 	pushq	RSP-RDI(%rdi)	/* RSP */
 	pushq	(%rdi)		/* RDI */
@@ -279,8 +279,7 @@ SYM_CODE_END(entry_SYSCALL_64)
  * %rdi: prev task
  * %rsi: next task
  */
-SYM_CODE_START(__switch_to_asm)
-	UNWIND_HINT_FUNC
+SYM_FUNC_START(__switch_to_asm)
 	/*
 	 * Save callee-saved registers
 	 * This must match the order in inactive_task_frame
@@ -321,7 +320,7 @@ SYM_CODE_START(__switch_to_asm)
 	popq	%rbp
 
 	jmp	__switch_to
-SYM_CODE_END(__switch_to_asm)
+SYM_FUNC_END(__switch_to_asm)
 
 /*
  * A newly forked process directly context switches into this address.
@@ -512,7 +511,7 @@ SYM_CODE_END(spurious_entries_start)
  * +----------------------------------------------------+
  */
 SYM_CODE_START(interrupt_entry)
-	UNWIND_HINT_FUNC
+	UNWIND_HINT_IRET_REGS offset=16
 	ASM_CLAC
 	cld
 
@@ -544,9 +543,9 @@ SYM_CODE_START(interrupt_entry)
 	pushq	5*8(%rdi)		/* regs->eflags */
 	pushq	4*8(%rdi)		/* regs->cs */
 	pushq	3*8(%rdi)		/* regs->ip */
+	UNWIND_HINT_IRET_REGS
 	pushq	2*8(%rdi)		/* regs->orig_ax */
 	pushq	8(%rdi)			/* return address */
-	UNWIND_HINT_FUNC
 
 	movq	(%rdi), %rdi
 	jmp	2f
@@ -637,6 +636,7 @@ SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
 	 */
 	movq	%rsp, %rdi
 	movq	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
+	UNWIND_HINT_EMPTY
 
 	/* Copy the IRET frame to the trampoline stack. */
 	pushq	6*8(%rdi)	/* SS */
@@ -1739,7 +1739,7 @@ SYM_CODE_START(rewind_stack_do_exit)
 
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rax
 	leaq	-PTREGS_SIZE(%rax), %rsp
-	UNWIND_HINT_FUNC sp_offset=PTREGS_SIZE
+	UNWIND_HINT_REGS
 
 	call	do_exit
 SYM_CODE_END(rewind_stack_do_exit)
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index 54581ac671b4..fd8032ddffb2 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -442,3 +442,4 @@
 435	i386	clone3			sys_clone3
 437	i386	openat2			sys_openat2
 438	i386	pidfd_getfd		sys_pidfd_getfd
+439	i386	process_madvise		sys_process_madvise		compat_sys_process_madvise
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index 37b844f839bc..3ff4be446922 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -359,6 +359,7 @@
 435	common	clone3			sys_clone3
 437	common	openat2			sys_openat2
 438	common	pidfd_getfd		sys_pidfd_getfd
+439	64	process_madvise		sys_process_madvise
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
@@ -402,3 +403,4 @@
 545	x32	execveat		compat_sys_execveat
 546	x32	preadv2			compat_sys_preadv64v2
 547	x32	pwritev2		compat_sys_pwritev64v2
+548	x32	process_madvise		compat_sys_process_madvise
diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 433a1259f61d..04e65f0698f6 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -10,8 +10,11 @@ ARCH_REL_TYPE_ABS += R_386_GLOB_DAT|R_386_JMP_SLOT|R_386_RELATIVE
 include $(srctree)/lib/vdso/Makefile
 
 KBUILD_CFLAGS += $(DISABLE_LTO)
+
+# Sanitizer runtimes are unavailable and cannot be linked here.
 KASAN_SANITIZE			:= n
 UBSAN_SANITIZE			:= n
+KCSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
 
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
@@ -24,9 +27,14 @@ VDSO32-$(CONFIG_IA32_EMULATION)	:= y
 
 # files to link into the vdso
 vobjs-y := vdso-note.o vclock_gettime.o vgetcpu.o
+vobjs32-y := vdso32/note.o vdso32/system_call.o vdso32/sigreturn.o
+vobjs32-y += vdso32/vclock_gettime.o
 
 # files to link into kernel
 obj-y				+= vma.o
+KASAN_SANITIZE_vma.o		:= y
+UBSAN_SANITIZE_vma.o		:= y
+KCSAN_SANITIZE_vma.o		:= y
 OBJECT_FILES_NON_STANDARD_vma.o	:= n
 
 # vDSO images to build
@@ -37,10 +45,12 @@ vdso_img-$(VDSO32-y)		+= 32
 obj-$(VDSO32-y)			+= vdso32-setup.o
 
 vobjs := $(foreach F,$(vobjs-y),$(obj)/$F)
+vobjs32 := $(foreach F,$(vobjs32-y),$(obj)/$F)
 
 $(obj)/vdso.o: $(obj)/vdso.so
 
 targets += vdso.lds $(vobjs-y)
+targets += vdso32/vdso32.lds $(vobjs32-y)
 
 # Build the vDSO image C files and link them in.
 vdso_img_objs := $(vdso_img-y:%=vdso-image-%.o)
@@ -130,10 +140,6 @@ $(obj)/vdsox32.so.dbg: $(obj)/vdsox32.lds $(vobjx32s) FORCE
 CPPFLAGS_vdso32/vdso32.lds = $(CPPFLAGS_vdso.lds)
 VDSO_LDFLAGS_vdso32.lds = -m elf_i386 -soname linux-gate.so.1
 
-targets += vdso32/vdso32.lds
-targets += vdso32/note.o vdso32/system_call.o vdso32/sigreturn.o
-targets += vdso32/vclock_gettime.o
-
 KBUILD_AFLAGS_32 := $(filter-out -m64,$(KBUILD_AFLAGS)) -DBUILD_VDSO
 $(obj)/vdso32.so.dbg: KBUILD_AFLAGS = $(KBUILD_AFLAGS_32)
 $(obj)/vdso32.so.dbg: asflags-$(CONFIG_X86_64) += -m32
@@ -158,12 +164,7 @@ endif
 
 $(obj)/vdso32.so.dbg: KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
 
-$(obj)/vdso32.so.dbg: FORCE \
-		      $(obj)/vdso32/vdso32.lds \
-		      $(obj)/vdso32/vclock_gettime.o \
-		      $(obj)/vdso32/note.o \
-		      $(obj)/vdso32/system_call.o \
-		      $(obj)/vdso32/sigreturn.o
+$(obj)/vdso32.so.dbg: $(obj)/vdso32/vdso32.lds $(vobjs32) FORCE
 	$(call if_changed,vdso_and_check)
 
 #
diff --git a/arch/x86/entry/vdso/vdso2c.c b/arch/x86/entry/vdso/vdso2c.c
index 3842873b3ae3..7380908045c7 100644
--- a/arch/x86/entry/vdso/vdso2c.c
+++ b/arch/x86/entry/vdso/vdso2c.c
@@ -187,7 +187,7 @@ static void map_input(const char *name, void **addr, size_t *len, int prot)
 
 	int fd = open(name, O_RDONLY);
 	if (fd == -1)
-		err(1, "%s", name);
+		err(1, "open(%s)", name);
 
 	tmp_len = lseek(fd, 0, SEEK_END);
 	if (tmp_len == (off_t)-1)
@@ -240,7 +240,7 @@ int main(int argc, char **argv)
 	outfilename = argv[3];
 	outfile = fopen(outfilename, "w");
 	if (!outfile)
-		err(1, "%s", argv[2]);
+		err(1, "fopen(%s)", outfilename);
 
 	go(raw_addr, raw_len, stripped_addr, stripped_len, outfile, name);
 
diff --git a/arch/x86/entry/vdso/vdso2c.h b/arch/x86/entry/vdso/vdso2c.h
index a20b134de2a8..6f46e11ce539 100644
--- a/arch/x86/entry/vdso/vdso2c.h
+++ b/arch/x86/entry/vdso/vdso2c.h
@@ -13,8 +13,7 @@ static void BITSFUNC(go)(void *raw_addr, size_t raw_len,
 	unsigned long load_size = -1;  /* Work around bogus warning */
 	unsigned long mapping_size;
 	ELF(Ehdr) *hdr = (ELF(Ehdr) *)raw_addr;
-	int i;
-	unsigned long j;
+	unsigned long i, syms_nr;
 	ELF(Shdr) *symtab_hdr = NULL, *strtab_hdr, *secstrings_hdr,
 		*alt_sec = NULL;
 	ELF(Dyn) *dyn = 0, *dyn_end = 0;
@@ -86,11 +85,10 @@ static void BITSFUNC(go)(void *raw_addr, size_t raw_len,
 	strtab_hdr = raw_addr + GET_LE(&hdr->e_shoff) +
 		GET_LE(&hdr->e_shentsize) * GET_LE(&symtab_hdr->sh_link);
 
+	syms_nr = GET_LE(&symtab_hdr->sh_size) / GET_LE(&symtab_hdr->sh_entsize);
 	/* Walk the symbol table */
-	for (i = 0;
-	     i < GET_LE(&symtab_hdr->sh_size) / GET_LE(&symtab_hdr->sh_entsize);
-	     i++) {
-		int k;
+	for (i = 0; i < syms_nr; i++) {
+		unsigned int k;
 		ELF(Sym) *sym = raw_addr + GET_LE(&symtab_hdr->sh_offset) +
 			GET_LE(&symtab_hdr->sh_entsize) * i;
 		const char *sym_name = raw_addr +
@@ -150,11 +148,11 @@ static void BITSFUNC(go)(void *raw_addr, size_t raw_len,
 	fprintf(outfile,
 		"static unsigned char raw_data[%lu] __ro_after_init __aligned(PAGE_SIZE) = {",
 		mapping_size);
-	for (j = 0; j < stripped_len; j++) {
-		if (j % 10 == 0)
+	for (i = 0; i < stripped_len; i++) {
+		if (i % 10 == 0)
 			fprintf(outfile, "\n\t");
 		fprintf(outfile, "0x%02X, ",
-			(int)((unsigned char *)stripped_addr)[j]);
+			(int)((unsigned char *)stripped_addr)[i]);
 	}
 	fprintf(outfile, "\n};\n\n");
 
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index a619763e96e1..30d2b1d3e94c 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -2162,11 +2162,6 @@ static int x86_pmu_event_init(struct perf_event *event)
 	return err;
 }
 
-static void refresh_pce(void *ignored)
-{
-	load_mm_cr4_irqsoff(this_cpu_read(cpu_tlbstate.loaded_mm));
-}
-
 static void x86_pmu_event_mapped(struct perf_event *event, struct mm_struct *mm)
 {
 	if (!(event->hw.flags & PERF_X86_EVENT_RDPMC_ALLOWED))
@@ -2185,7 +2180,7 @@ static void x86_pmu_event_mapped(struct perf_event *event, struct mm_struct *mm)
 	lockdep_assert_held_write(&mm->mmap_sem);
 
 	if (atomic_inc_return(&mm->context.perf_rdpmc_allowed) == 1)
-		on_each_cpu_mask(mm_cpumask(mm), refresh_pce, NULL, 1);
+		on_each_cpu_mask(mm_cpumask(mm), cr4_update_pce, NULL, 1);
 }
 
 static void x86_pmu_event_unmapped(struct perf_event *event, struct mm_struct *mm)
@@ -2195,7 +2190,7 @@ static void x86_pmu_event_unmapped(struct perf_event *event, struct mm_struct *m
 		return;
 
 	if (atomic_dec_and_test(&mm->context.perf_rdpmc_allowed))
-		on_each_cpu_mask(mm_cpumask(mm), refresh_pce, NULL, 1);
+		on_each_cpu_mask(mm_cpumask(mm), cr4_update_pce, NULL, 1);
 }
 
 static int x86_pmu_event_idx(struct perf_event *event)
@@ -2253,7 +2248,7 @@ static ssize_t set_attr_rdpmc(struct device *cdev,
 		else if (x86_pmu.attr_rdpmc == 2)
 			static_branch_dec(&rdpmc_always_available_key);
 
-		on_each_cpu(refresh_pce, NULL, 1);
+		on_each_cpu(cr4_update_pce, NULL, 1);
 		x86_pmu.attr_rdpmc = val;
 	}
 
diff --git a/arch/x86/events/intel/bts.c b/arch/x86/events/intel/bts.c
index 6a3b599ee0fe..731dd8d0dbb1 100644
--- a/arch/x86/events/intel/bts.c
+++ b/arch/x86/events/intel/bts.c
@@ -58,7 +58,7 @@ struct bts_buffer {
 	local_t		head;
 	unsigned long	end;
 	void		**data_pages;
-	struct bts_phys	buf[0];
+	struct bts_phys	buf[];
 };
 
 static struct pmu bts_pmu;
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index 0da4a4605536..b469ddd45515 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -130,7 +130,7 @@ struct intel_uncore_box {
 	struct list_head list;
 	struct list_head active_list;
 	void __iomem *io_addr;
-	struct intel_uncore_extra_reg shared_regs[0];
+	struct intel_uncore_extra_reg shared_regs[];
 };
 
 /* CFL uncore 8th cbox MSRs */
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 624f5d9b0f79..f5710402fffc 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -73,7 +73,8 @@ static int hv_cpu_init(unsigned int cpu)
 	struct page *pg;
 
 	input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
-	pg = alloc_page(GFP_KERNEL);
+	/* hv_cpu_init() can be called with IRQs disabled from hv_resume() */
+	pg = alloc_page(irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
 	if (unlikely(!pg))
 		return -ENOMEM;
 	*input_arg = page_address(pg);
@@ -96,8 +97,7 @@ static int hv_cpu_init(unsigned int cpu)
 	 * not be stopped in the case of CPU offlining and the VM will hang.
 	 */
 	if (!*hvp) {
-		*hvp = __vmalloc(PAGE_SIZE, GFP_KERNEL | __GFP_ZERO,
-				 PAGE_KERNEL);
+		*hvp = __vmalloc(PAGE_SIZE, GFP_KERNEL | __GFP_ZERO);
 	}
 
 	if (*hvp) {
@@ -254,6 +254,7 @@ static int __init hv_pci_init(void)
 static int hv_suspend(void)
 {
 	union hv_x64_msr_hypercall_contents hypercall_msr;
+	int ret;
 
 	/*
 	 * Reset the hypercall page as it is going to be invalidated
@@ -270,12 +271,17 @@ static int hv_suspend(void)
 	hypercall_msr.enable = 0;
 	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
 
-	return 0;
+	ret = hv_cpu_die(0);
+	return ret;
 }
 
 static void hv_resume(void)
 {
 	union hv_x64_msr_hypercall_contents hypercall_msr;
+	int ret;
+
+	ret = hv_cpu_init(0);
+	WARN_ON(ret);
 
 	/* Re-enable the hypercall page */
 	rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
@@ -288,6 +294,7 @@ static void hv_resume(void)
 	hv_hypercall_pg_saved = NULL;
 }
 
+/* Note: when the ops are called, only CPU0 is online and IRQs are disabled. */
 static struct syscore_ops hv_syscore_ops = {
 	.suspend	= hv_suspend,
 	.resume		= hv_resume,
@@ -356,7 +363,7 @@ void __init hyperv_init(void)
 	guest_id = generate_guest_id(0, LINUX_VERSION_CODE, 0);
 	wrmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
 
-	hv_hypercall_pg  = __vmalloc(PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL_RX);
+	hv_hypercall_pg = vmalloc_exec(PAGE_SIZE);
 	if (hv_hypercall_pg == NULL) {
 		wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
 		goto remove_cpuhp_state;
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index c7df20e78b09..455066a06f60 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -57,6 +57,7 @@ struct threshold_bank {
 
 	/* initialized to the number of CPUs on the node sharing this bank */
 	refcount_t		cpus;
+	unsigned int		shared;
 };
 
 struct amd_northbridge {
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 53f246e9df5a..b392571c1f1d 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -201,8 +201,12 @@ arch_test_and_change_bit(long nr, volatile unsigned long *addr)
 	return GEN_BINARY_RMWcc(LOCK_PREFIX __ASM_SIZE(btc), *addr, c, "Ir", nr);
 }
 
-static __always_inline bool constant_test_bit(long nr, const volatile unsigned long *addr)
+static __no_kcsan_or_inline bool constant_test_bit(long nr, const volatile unsigned long *addr)
 {
+	/*
+	 * Because this is a plain access, we need to disable KCSAN here to
+	 * avoid double instrumentation via instrumented bitops.
+	 */
 	return ((1UL << (nr & (BITS_PER_LONG-1))) &
 		(addr[nr >> _BITOPS_LONG_SHIFT])) != 0;
 }
diff --git a/arch/x86/include/asm/doublefault.h b/arch/x86/include/asm/doublefault.h
index af9a14ac8962..54a6e4a2e132 100644
--- a/arch/x86/include/asm/doublefault.h
+++ b/arch/x86/include/asm/doublefault.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_X86_DOUBLEFAULT_H
 #define _ASM_X86_DOUBLEFAULT_H
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_DOUBLEFAULT)
+#ifdef CONFIG_X86_32
 extern void doublefault_init_cpu_tss(void);
 #else
 static inline void doublefault_init_cpu_tss(void)
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 8391c115c0ec..cd0c3fbf6156 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -225,14 +225,19 @@ efi_status_t efi_set_virtual_address_map(unsigned long memory_map_size,
 
 /* arch specific definitions used by the stub code */
 
-__attribute_const__ bool efi_is_64bit(void);
+extern const bool efi_is64;
+
+static inline bool efi_is_64bit(void)
+{
+	if (IS_ENABLED(CONFIG_EFI_MIXED))
+		return efi_is64;
+	return IS_ENABLED(CONFIG_X86_64);
+}
 
 static inline bool efi_is_native(void)
 {
 	if (!IS_ENABLED(CONFIG_X86_64))
 		return true;
-	if (!IS_ENABLED(CONFIG_EFI_MIXED))
-		return true;
 	return efi_is_64bit();
 }
 
@@ -307,6 +312,10 @@ static inline u32 efi64_convert_status(efi_status_t status)
 #define __efi64_argmap_load_file(protocol, path, policy, bufsize, buf)	\
 	((protocol), (path), (policy), efi64_zero_upper(bufsize), (buf))
 
+/* Graphics Output Protocol */
+#define __efi64_argmap_query_mode(gop, mode, size, info)		\
+	((gop), (mode), efi64_zero_upper(size), efi64_zero_upper(info))
+
 /*
  * The macros below handle the plumbing for the argument mapping. To add a
  * mapping for a specific EFI method, simply define a macro
@@ -335,15 +344,17 @@ static inline u32 efi64_convert_status(efi_status_t status)
 
 #define efi_bs_call(func, ...)						\
 	(efi_is_native()						\
-		? efi_system_table()->boottime->func(__VA_ARGS__)	\
-		: __efi64_thunk_map(efi_table_attr(efi_system_table(),	\
-				boottime), func, __VA_ARGS__))
+		? efi_system_table->boottime->func(__VA_ARGS__)		\
+		: __efi64_thunk_map(efi_table_attr(efi_system_table,	\
+						   boottime),		\
+				    func, __VA_ARGS__))
 
 #define efi_rt_call(func, ...)						\
 	(efi_is_native()						\
-		? efi_system_table()->runtime->func(__VA_ARGS__)	\
-		: __efi64_thunk_map(efi_table_attr(efi_system_table(),	\
-				runtime), func, __VA_ARGS__))
+		? efi_system_table->runtime->func(__VA_ARGS__)		\
+		: __efi64_thunk_map(efi_table_attr(efi_system_table,	\
+						   runtime),		\
+				    func, __VA_ARGS__))
 
 extern bool efi_reboot_required(void);
 extern bool efi_is_table_address(unsigned long phys_addr);
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 69c0f892e310..452beed7892b 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -281,9 +281,29 @@ extern u32 elf_hwcap2;
 /*
  * An executable for which elf_read_implies_exec() returns TRUE will
  * have the READ_IMPLIES_EXEC personality flag set automatically.
+ *
+ * The decision process for determining the results are:
+ *
+ *                 CPU: | lacks NX*  | has NX, ia32     | has NX, x86_64 |
+ * ELF:                 |            |                  |                |
+ * ---------------------|------------|------------------|----------------|
+ * missing PT_GNU_STACK | exec-all   | exec-all         | exec-none      |
+ * PT_GNU_STACK == RWX  | exec-stack | exec-stack       | exec-stack     |
+ * PT_GNU_STACK == RW   | exec-none  | exec-none        | exec-none      |
+ *
+ *  exec-all  : all PROT_READ user mappings are executable, except when
+ *              backed by files on a noexec-filesystem.
+ *  exec-none : only PROT_EXEC user mappings are executable.
+ *  exec-stack: only the stack and PROT_EXEC user mappings are executable.
+ *
+ *  *this column has no architectural effect: NX markings are ignored by
+ *   hardware, but may have behavioral effects when "wants X" collides with
+ *   "cannot be X" constraints in memory permission flags, as in
+ *   https://lkml.kernel.org/r/20190418055759.GA3155@mellanox.com
+ *
  */
 #define elf_read_implies_exec(ex, executable_stack)	\
-	(executable_stack != EXSTACK_DISABLE_X)
+	(mmap_is_ia32() && executable_stack == EXSTACK_DEFAULT)
 
 struct task_struct;
 
diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h
index 29336574d0bc..4e91f6118d5d 100644
--- a/arch/x86/include/asm/hyperv-tlfs.h
+++ b/arch/x86/include/asm/hyperv-tlfs.h
@@ -11,17 +11,6 @@
 
 #include <linux/types.h>
 #include <asm/page.h>
-
-/*
- * While not explicitly listed in the TLFS, Hyper-V always runs with a page size
- * of 4096. These definitions are used when communicating with Hyper-V using
- * guest physical pages and guest physical page addresses, since the guest page
- * size may not be 4096 on all architectures.
- */
-#define HV_HYP_PAGE_SHIFT      12
-#define HV_HYP_PAGE_SIZE       BIT(HV_HYP_PAGE_SHIFT)
-#define HV_HYP_PAGE_MASK       (~(HV_HYP_PAGE_SIZE - 1))
-
 /*
  * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
  * is set by CPUID(HvCpuIdFunctionVersionAndFeatures).
@@ -39,78 +28,41 @@
 #define HYPERV_CPUID_MAX			0x4000ffff
 
 /*
- * Feature identification. EAX indicates which features are available
- * to the partition based upon the current partition privileges.
- * These are HYPERV_CPUID_FEATURES.EAX bits.
+ * Aliases for Group A features that have X64 in the name.
+ * On x86/x64 these are HYPERV_CPUID_FEATURES.EAX bits.
  */
 
-/* VP Runtime (HV_X64_MSR_VP_RUNTIME) available */
-#define HV_X64_MSR_VP_RUNTIME_AVAILABLE		BIT(0)
-/* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
-#define HV_MSR_TIME_REF_COUNT_AVAILABLE		BIT(1)
-/*
- * Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM
- * and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
- */
-#define HV_X64_MSR_SYNIC_AVAILABLE		BIT(2)
-/*
- * Synthetic Timer MSRs (HV_X64_MSR_STIMER0_CONFIG through
- * HV_X64_MSR_STIMER3_COUNT) available
- */
-#define HV_MSR_SYNTIMER_AVAILABLE		BIT(3)
-/*
- * APIC access MSRs (HV_X64_MSR_EOI, HV_X64_MSR_ICR and HV_X64_MSR_TPR)
- * are available
- */
-#define HV_X64_MSR_APIC_ACCESS_AVAILABLE	BIT(4)
-/* Hypercall MSRs (HV_X64_MSR_GUEST_OS_ID and HV_X64_MSR_HYPERCALL) available*/
-#define HV_X64_MSR_HYPERCALL_AVAILABLE		BIT(5)
-/* Access virtual processor index MSR (HV_X64_MSR_VP_INDEX) available*/
-#define HV_X64_MSR_VP_INDEX_AVAILABLE		BIT(6)
-/* Virtual system reset MSR (HV_X64_MSR_RESET) is available*/
-#define HV_X64_MSR_RESET_AVAILABLE		BIT(7)
-/*
- * Access statistics pages MSRs (HV_X64_MSR_STATS_PARTITION_RETAIL_PAGE,
- * HV_X64_MSR_STATS_PARTITION_INTERNAL_PAGE, HV_X64_MSR_STATS_VP_RETAIL_PAGE,
- * HV_X64_MSR_STATS_VP_INTERNAL_PAGE) available
- */
-#define HV_X64_MSR_STAT_PAGES_AVAILABLE		BIT(8)
-/* Partition reference TSC MSR is available */
-#define HV_MSR_REFERENCE_TSC_AVAILABLE		BIT(9)
-/* Partition Guest IDLE MSR is available */
-#define HV_X64_MSR_GUEST_IDLE_AVAILABLE		BIT(10)
-/*
- * There is a single feature flag that signifies if the partition has access
- * to MSRs with local APIC and TSC frequencies.
- */
-#define HV_X64_ACCESS_FREQUENCY_MSRS		BIT(11)
-/* AccessReenlightenmentControls privilege */
-#define HV_X64_ACCESS_REENLIGHTENMENT		BIT(13)
-/* AccessTscInvariantControls privilege */
-#define HV_X64_ACCESS_TSC_INVARIANT		BIT(15)
+#define HV_X64_MSR_VP_RUNTIME_AVAILABLE		\
+		HV_MSR_VP_RUNTIME_AVAILABLE
+#define HV_X64_MSR_SYNIC_AVAILABLE		\
+		HV_MSR_SYNIC_AVAILABLE
+#define HV_X64_MSR_APIC_ACCESS_AVAILABLE	\
+		HV_MSR_APIC_ACCESS_AVAILABLE
+#define HV_X64_MSR_HYPERCALL_AVAILABLE		\
+		HV_MSR_HYPERCALL_AVAILABLE
+#define HV_X64_MSR_VP_INDEX_AVAILABLE		\
+		HV_MSR_VP_INDEX_AVAILABLE
+#define HV_X64_MSR_RESET_AVAILABLE		\
+		HV_MSR_RESET_AVAILABLE
+#define HV_X64_MSR_GUEST_IDLE_AVAILABLE		\
+		HV_MSR_GUEST_IDLE_AVAILABLE
+#define HV_X64_ACCESS_FREQUENCY_MSRS		\
+		HV_ACCESS_FREQUENCY_MSRS
+#define HV_X64_ACCESS_REENLIGHTENMENT		\
+		HV_ACCESS_REENLIGHTENMENT
+#define HV_X64_ACCESS_TSC_INVARIANT		\
+		HV_ACCESS_TSC_INVARIANT
 
 /*
- * Feature identification: indicates which flags were specified at partition
- * creation. The format is the same as the partition creation flag structure
- * defined in section Partition Creation Flags.
- * These are HYPERV_CPUID_FEATURES.EBX bits.
+ * Aliases for Group B features that have X64 in the name.
+ * On x86/x64 these are HYPERV_CPUID_FEATURES.EBX bits.
  */
-#define HV_X64_CREATE_PARTITIONS		BIT(0)
-#define HV_X64_ACCESS_PARTITION_ID		BIT(1)
-#define HV_X64_ACCESS_MEMORY_POOL		BIT(2)
-#define HV_X64_ADJUST_MESSAGE_BUFFERS		BIT(3)
-#define HV_X64_POST_MESSAGES			BIT(4)
-#define HV_X64_SIGNAL_EVENTS			BIT(5)
-#define HV_X64_CREATE_PORT			BIT(6)
-#define HV_X64_CONNECT_PORT			BIT(7)
-#define HV_X64_ACCESS_STATS			BIT(8)
-#define HV_X64_DEBUGGING			BIT(11)
-#define HV_X64_CPU_POWER_MANAGEMENT		BIT(12)
+#define HV_X64_POST_MESSAGES		HV_POST_MESSAGES
+#define HV_X64_SIGNAL_EVENTS		HV_SIGNAL_EVENTS
 
 /*
- * Feature identification. EDX indicates which miscellaneous features
- * are available to the partition.
- * These are HYPERV_CPUID_FEATURES.EDX bits.
+ * Group D Features.  The bit assignments are custom to each architecture.
+ * On x86/x64 these are HYPERV_CPUID_FEATURES.EDX bits.
  */
 /* The MWAIT instruction is available (per section MONITOR / MWAIT) */
 #define HV_X64_MWAIT_AVAILABLE				BIT(0)
@@ -187,7 +139,7 @@
  * processor, except for virtual processors that are reported as sibling SMT
  * threads.
  */
-#define HV_X64_NO_NONARCH_CORESHARING                  BIT(18)
+#define HV_X64_NO_NONARCH_CORESHARING			BIT(18)
 
 /* Nested features. These are HYPERV_CPUID_NESTED_FEATURES.EAX bits. */
 #define HV_X64_NESTED_DIRECT_FLUSH			BIT(17)
@@ -295,43 +247,6 @@ union hv_x64_msr_hypercall_contents {
 	} __packed;
 };
 
-/*
- * TSC page layout.
- */
-struct ms_hyperv_tsc_page {
-	volatile u32 tsc_sequence;
-	u32 reserved1;
-	volatile u64 tsc_scale;
-	volatile s64 tsc_offset;
-	u64 reserved2[509];
-}  __packed;
-
-/*
- * The guest OS needs to register the guest ID with the hypervisor.
- * The guest ID is a 64 bit entity and the structure of this ID is
- * specified in the Hyper-V specification:
- *
- * msdn.microsoft.com/en-us/library/windows/hardware/ff542653%28v=vs.85%29.aspx
- *
- * While the current guideline does not specify how Linux guest ID(s)
- * need to be generated, our plan is to publish the guidelines for
- * Linux and other guest operating systems that currently are hosted
- * on Hyper-V. The implementation here conforms to this yet
- * unpublished guidelines.
- *
- *
- * Bit(s)
- * 63 - Indicates if the OS is Open Source or not; 1 is Open Source
- * 62:56 - Os Type; Linux is 0x100
- * 55:48 - Distro specific identification
- * 47:16 - Linux kernel version number
- * 15:0  - Distro specific identification
- *
- *
- */
-
-#define HV_LINUX_VENDOR_ID              0x8100
-
 struct hv_reenlightenment_control {
 	__u64 vector:8;
 	__u64 reserved1:8;
@@ -355,31 +270,12 @@ struct hv_tsc_emulation_status {
 #define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_MASK	\
 		(~((1ull << HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT) - 1))
 
-/*
- * Crash notification (HV_X64_MSR_CRASH_CTL) flags.
- */
-#define HV_CRASH_CTL_CRASH_NOTIFY_MSG		BIT_ULL(62)
-#define HV_CRASH_CTL_CRASH_NOTIFY		BIT_ULL(63)
 #define HV_X64_MSR_CRASH_PARAMS		\
 		(1 + (HV_X64_MSR_CRASH_P4 - HV_X64_MSR_CRASH_P0))
 
 #define HV_IPI_LOW_VECTOR	0x10
 #define HV_IPI_HIGH_VECTOR	0xff
 
-/* Declare the various hypercall operations. */
-#define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE	0x0002
-#define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST	0x0003
-#define HVCALL_NOTIFY_LONG_SPIN_WAIT		0x0008
-#define HVCALL_SEND_IPI				0x000b
-#define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX  0x0013
-#define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX   0x0014
-#define HVCALL_SEND_IPI_EX			0x0015
-#define HVCALL_POST_MESSAGE			0x005c
-#define HVCALL_SIGNAL_EVENT			0x005d
-#define HVCALL_RETARGET_INTERRUPT		0x007e
-#define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE 0x00af
-#define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_LIST 0x00b0
-
 #define HV_X64_MSR_VP_ASSIST_PAGE_ENABLE	0x00000001
 #define HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_SHIFT	12
 #define HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_MASK	\
@@ -391,75 +287,6 @@ struct hv_tsc_emulation_status {
 #define HV_X64_MSR_TSC_REFERENCE_ENABLE		0x00000001
 #define HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT	12
 
-#define HV_PROCESSOR_POWER_STATE_C0		0
-#define HV_PROCESSOR_POWER_STATE_C1		1
-#define HV_PROCESSOR_POWER_STATE_C2		2
-#define HV_PROCESSOR_POWER_STATE_C3		3
-
-#define HV_FLUSH_ALL_PROCESSORS			BIT(0)
-#define HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES	BIT(1)
-#define HV_FLUSH_NON_GLOBAL_MAPPINGS_ONLY	BIT(2)
-#define HV_FLUSH_USE_EXTENDED_RANGE_FORMAT	BIT(3)
-
-enum HV_GENERIC_SET_FORMAT {
-	HV_GENERIC_SET_SPARSE_4K,
-	HV_GENERIC_SET_ALL,
-};
-
-#define HV_PARTITION_ID_SELF                    ((u64)-1)
-
-#define HV_HYPERCALL_RESULT_MASK	GENMASK_ULL(15, 0)
-#define HV_HYPERCALL_FAST_BIT		BIT(16)
-#define HV_HYPERCALL_VARHEAD_OFFSET	17
-#define HV_HYPERCALL_REP_COMP_OFFSET	32
-#define HV_HYPERCALL_REP_COMP_MASK	GENMASK_ULL(43, 32)
-#define HV_HYPERCALL_REP_START_OFFSET	48
-#define HV_HYPERCALL_REP_START_MASK	GENMASK_ULL(59, 48)
-
-/* hypercall status code */
-#define HV_STATUS_SUCCESS			0
-#define HV_STATUS_INVALID_HYPERCALL_CODE	2
-#define HV_STATUS_INVALID_HYPERCALL_INPUT	3
-#define HV_STATUS_INVALID_ALIGNMENT		4
-#define HV_STATUS_INVALID_PARAMETER		5
-#define HV_STATUS_INSUFFICIENT_MEMORY		11
-#define HV_STATUS_INVALID_PORT_ID		17
-#define HV_STATUS_INVALID_CONNECTION_ID		18
-#define HV_STATUS_INSUFFICIENT_BUFFERS		19
-
-/*
- * The Hyper-V TimeRefCount register and the TSC
- * page provide a guest VM clock with 100ns tick rate
- */
-#define HV_CLOCK_HZ (NSEC_PER_SEC/100)
-
-typedef struct _HV_REFERENCE_TSC_PAGE {
-	__u32 tsc_sequence;
-	__u32 res1;
-	__u64 tsc_scale;
-	__s64 tsc_offset;
-}  __packed HV_REFERENCE_TSC_PAGE, *PHV_REFERENCE_TSC_PAGE;
-
-/* Define the number of synthetic interrupt sources. */
-#define HV_SYNIC_SINT_COUNT		(16)
-/* Define the expected SynIC version. */
-#define HV_SYNIC_VERSION_1		(0x1)
-/* Valid SynIC vectors are 16-255. */
-#define HV_SYNIC_FIRST_VALID_VECTOR	(16)
-
-#define HV_SYNIC_CONTROL_ENABLE		(1ULL << 0)
-#define HV_SYNIC_SIMP_ENABLE		(1ULL << 0)
-#define HV_SYNIC_SIEFP_ENABLE		(1ULL << 0)
-#define HV_SYNIC_SINT_MASKED		(1ULL << 16)
-#define HV_SYNIC_SINT_AUTO_EOI		(1ULL << 17)
-#define HV_SYNIC_SINT_VECTOR_MASK	(0xFF)
-
-#define HV_SYNIC_STIMER_COUNT		(4)
-
-/* Define synthetic interrupt controller message constants. */
-#define HV_MESSAGE_SIZE			(256)
-#define HV_MESSAGE_PAYLOAD_BYTE_COUNT	(240)
-#define HV_MESSAGE_PAYLOAD_QWORD_COUNT	(30)
 
 /* Define hypervisor message types. */
 enum hv_message_type {
@@ -470,76 +297,25 @@ enum hv_message_type {
 	HVMSG_GPA_INTERCEPT		= 0x80000001,
 
 	/* Timer notification messages. */
-	HVMSG_TIMER_EXPIRED			= 0x80000010,
+	HVMSG_TIMER_EXPIRED		= 0x80000010,
 
 	/* Error messages. */
 	HVMSG_INVALID_VP_REGISTER_VALUE	= 0x80000020,
 	HVMSG_UNRECOVERABLE_EXCEPTION	= 0x80000021,
-	HVMSG_UNSUPPORTED_FEATURE		= 0x80000022,
+	HVMSG_UNSUPPORTED_FEATURE	= 0x80000022,
 
 	/* Trace buffer complete messages. */
 	HVMSG_EVENTLOG_BUFFERCOMPLETE	= 0x80000040,
 
 	/* Platform-specific processor intercept messages. */
-	HVMSG_X64_IOPORT_INTERCEPT		= 0x80010000,
+	HVMSG_X64_IOPORT_INTERCEPT	= 0x80010000,
 	HVMSG_X64_MSR_INTERCEPT		= 0x80010001,
-	HVMSG_X64_CPUID_INTERCEPT		= 0x80010002,
+	HVMSG_X64_CPUID_INTERCEPT	= 0x80010002,
 	HVMSG_X64_EXCEPTION_INTERCEPT	= 0x80010003,
-	HVMSG_X64_APIC_EOI			= 0x80010004,
-	HVMSG_X64_LEGACY_FP_ERROR		= 0x80010005
-};
-
-/* Define synthetic interrupt controller message flags. */
-union hv_message_flags {
-	__u8 asu8;
-	struct {
-		__u8 msg_pending:1;
-		__u8 reserved:7;
-	} __packed;
-};
-
-/* Define port identifier type. */
-union hv_port_id {
-	__u32 asu32;
-	struct {
-		__u32 id:24;
-		__u32 reserved:8;
-	} __packed u;
+	HVMSG_X64_APIC_EOI		= 0x80010004,
+	HVMSG_X64_LEGACY_FP_ERROR	= 0x80010005
 };
 
-/* Define synthetic interrupt controller message header. */
-struct hv_message_header {
-	__u32 message_type;
-	__u8 payload_size;
-	union hv_message_flags message_flags;
-	__u8 reserved[2];
-	union {
-		__u64 sender;
-		union hv_port_id port;
-	};
-} __packed;
-
-/* Define synthetic interrupt controller message format. */
-struct hv_message {
-	struct hv_message_header header;
-	union {
-		__u64 payload[HV_MESSAGE_PAYLOAD_QWORD_COUNT];
-	} u;
-} __packed;
-
-/* Define the synthetic interrupt message page layout. */
-struct hv_message_page {
-	struct hv_message sint_message[HV_SYNIC_SINT_COUNT];
-} __packed;
-
-/* Define timer message payload structure. */
-struct hv_timer_message_payload {
-	__u32 timer_index;
-	__u32 reserved;
-	__u64 expiration_time;	/* When the timer expired */
-	__u64 delivery_time;	/* When the message was delivered */
-} __packed;
-
 struct hv_nested_enlightenments_control {
 	struct {
 		__u32 directhypercall:1;
@@ -767,187 +543,11 @@ struct hv_enlightened_vmcs {
 
 #define HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL			0xFFFF
 
-/* Define synthetic interrupt controller flag constants. */
-#define HV_EVENT_FLAGS_COUNT		(256 * 8)
-#define HV_EVENT_FLAGS_LONG_COUNT	(256 / sizeof(unsigned long))
-
-/*
- * Synthetic timer configuration.
- */
-union hv_stimer_config {
-	u64 as_uint64;
-	struct {
-		u64 enable:1;
-		u64 periodic:1;
-		u64 lazy:1;
-		u64 auto_enable:1;
-		u64 apic_vector:8;
-		u64 direct_mode:1;
-		u64 reserved_z0:3;
-		u64 sintx:4;
-		u64 reserved_z1:44;
-	} __packed;
-};
-
-
-/* Define the synthetic interrupt controller event flags format. */
-union hv_synic_event_flags {
-	unsigned long flags[HV_EVENT_FLAGS_LONG_COUNT];
-};
-
-/* Define SynIC control register. */
-union hv_synic_scontrol {
-	u64 as_uint64;
-	struct {
-		u64 enable:1;
-		u64 reserved:63;
-	} __packed;
-};
-
-/* Define synthetic interrupt source. */
-union hv_synic_sint {
-	u64 as_uint64;
-	struct {
-		u64 vector:8;
-		u64 reserved1:8;
-		u64 masked:1;
-		u64 auto_eoi:1;
-		u64 polling:1;
-		u64 reserved2:45;
-	} __packed;
-};
-
-/* Define the format of the SIMP register */
-union hv_synic_simp {
-	u64 as_uint64;
-	struct {
-		u64 simp_enabled:1;
-		u64 preserved:11;
-		u64 base_simp_gpa:52;
-	} __packed;
-};
-
-/* Define the format of the SIEFP register */
-union hv_synic_siefp {
-	u64 as_uint64;
-	struct {
-		u64 siefp_enabled:1;
-		u64 preserved:11;
-		u64 base_siefp_gpa:52;
-	} __packed;
-};
-
-struct hv_vpset {
-	u64 format;
-	u64 valid_bank_mask;
-	u64 bank_contents[];
-} __packed;
-
-/* HvCallSendSyntheticClusterIpi hypercall */
-struct hv_send_ipi {
-	u32 vector;
-	u32 reserved;
-	u64 cpu_mask;
-} __packed;
-
-/* HvCallSendSyntheticClusterIpiEx hypercall */
-struct hv_send_ipi_ex {
-	u32 vector;
-	u32 reserved;
-	struct hv_vpset vp_set;
-} __packed;
-
-/* HvFlushGuestPhysicalAddressSpace hypercalls */
-struct hv_guest_mapping_flush {
-	u64 address_space;
-	u64 flags;
-} __packed;
-
-/*
- *  HV_MAX_FLUSH_PAGES = "additional_pages" + 1. It's limited
- *  by the bitwidth of "additional_pages" in union hv_gpa_page_range.
- */
-#define HV_MAX_FLUSH_PAGES (2048)
-
-/* HvFlushGuestPhysicalAddressList hypercall */
-union hv_gpa_page_range {
-	u64 address_space;
-	struct {
-		u64 additional_pages:11;
-		u64 largepage:1;
-		u64 basepfn:52;
-	} page;
-};
-
-/*
- * All input flush parameters should be in single page. The max flush
- * count is equal with how many entries of union hv_gpa_page_range can
- * be populated into the input parameter page.
- */
-#define HV_MAX_FLUSH_REP_COUNT ((HV_HYP_PAGE_SIZE - 2 * sizeof(u64)) /	\
-				sizeof(union hv_gpa_page_range))
-
-struct hv_guest_mapping_flush_list {
-	u64 address_space;
-	u64 flags;
-	union hv_gpa_page_range gpa_list[HV_MAX_FLUSH_REP_COUNT];
-};
-
-/* HvFlushVirtualAddressSpace, HvFlushVirtualAddressList hypercalls */
-struct hv_tlb_flush {
-	u64 address_space;
-	u64 flags;
-	u64 processor_mask;
-	u64 gva_list[];
-} __packed;
-
-/* HvFlushVirtualAddressSpaceEx, HvFlushVirtualAddressListEx hypercalls */
-struct hv_tlb_flush_ex {
-	u64 address_space;
-	u64 flags;
-	struct hv_vpset hv_vp_set;
-	u64 gva_list[];
-} __packed;
-
 struct hv_partition_assist_pg {
 	u32 tlb_lock_count;
 };
 
-union hv_msi_entry {
-	u64 as_uint64;
-	struct {
-		u32 address;
-		u32 data;
-	} __packed;
-};
-
-struct hv_interrupt_entry {
-	u32 source;			/* 1 for MSI(-X) */
-	u32 reserved1;
-	union hv_msi_entry msi_entry;
-} __packed;
 
-/*
- * flags for hv_device_interrupt_target.flags
- */
-#define HV_DEVICE_INTERRUPT_TARGET_MULTICAST		1
-#define HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET	2
-
-struct hv_device_interrupt_target {
-	u32 vector;
-	u32 flags;
-	union {
-		u64 vp_mask;
-		struct hv_vpset vp_set;
-	};
-} __packed;
+#include <asm-generic/hyperv-tlfs.h>
 
-/* HvRetargetDeviceInterrupt hypercall */
-struct hv_retarget_device_interrupt {
-	u64 partition_id;		/* use "self" */
-	u64 device_id;
-	struct hv_interrupt_entry int_entry;
-	u64 reserved2;
-	struct hv_device_interrupt_target int_target;
-} __packed __aligned(8);
 #endif
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index 8e5af119dc2d..de58391bdee0 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -88,11 +88,17 @@ static inline bool intel_mid_has_msic(void)
 	return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL);
 }
 
+extern void intel_scu_devices_create(void);
+extern void intel_scu_devices_destroy(void);
+
 #else /* !CONFIG_X86_INTEL_MID */
 
 #define intel_mid_identify_cpu()	0
 #define intel_mid_has_msic()		0
 
+static inline void intel_scu_devices_create(void) { }
+static inline void intel_scu_devices_destroy(void) { }
+
 #endif /* !CONFIG_X86_INTEL_MID */
 
 enum intel_mid_timer_options {
@@ -115,9 +121,6 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
 #define SFI_MTMR_MAX_NUM		8
 #define SFI_MRTC_MAX			8
 
-extern void intel_scu_devices_create(void);
-extern void intel_scu_devices_destroy(void);
-
 /* VRTC timer */
 #define MRST_VRTC_MAP_SZ		1024
 /* #define MRST_VRTC_PGOFFSET		0xc00 */
diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
deleted file mode 100644
index e6da1ce26256..000000000000
--- a/arch/x86/include/asm/intel_pmc_ipc.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_INTEL_PMC_IPC_H_
-#define  _ASM_X86_INTEL_PMC_IPC_H_
-
-/* Commands */
-#define PMC_IPC_PMIC_ACCESS		0xFF
-#define		PMC_IPC_PMIC_ACCESS_READ	0x0
-#define		PMC_IPC_PMIC_ACCESS_WRITE	0x1
-#define PMC_IPC_USB_PWR_CTRL		0xF0
-#define PMC_IPC_PMIC_BLACKLIST_SEL	0xEF
-#define PMC_IPC_PHY_CONFIG		0xEE
-#define PMC_IPC_NORTHPEAK_CTRL		0xED
-#define PMC_IPC_PM_DEBUG		0xEC
-#define PMC_IPC_PMC_TELEMTRY		0xEB
-#define PMC_IPC_PMC_FW_MSG_CTRL		0xEA
-
-/* IPC return code */
-#define IPC_ERR_NONE			0
-#define IPC_ERR_CMD_NOT_SUPPORTED	1
-#define IPC_ERR_CMD_NOT_SERVICED	2
-#define IPC_ERR_UNABLE_TO_SERVICE	3
-#define IPC_ERR_CMD_INVALID		4
-#define IPC_ERR_CMD_FAILED		5
-#define IPC_ERR_EMSECURITY		6
-#define IPC_ERR_UNSIGNEDKERNEL		7
-
-/* GCR reg offsets from gcr base*/
-#define PMC_GCR_PMC_CFG_REG		0x08
-#define PMC_GCR_TELEM_DEEP_S0IX_REG	0x78
-#define PMC_GCR_TELEM_SHLW_S0IX_REG	0x80
-
-#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
-
-int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
-		u32 *out, u32 outlen);
-int intel_pmc_s0ix_counter_read(u64 *data);
-int intel_pmc_gcr_read64(u32 offset, u64 *data);
-
-#else
-
-static inline int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
-		u32 *out, u32 outlen)
-{
-	return -EINVAL;
-}
-
-static inline int intel_pmc_s0ix_counter_read(u64 *data)
-{
-	return -EINVAL;
-}
-
-static inline int intel_pmc_gcr_read64(u32 offset, u64 *data)
-{
-	return -EINVAL;
-}
-
-#endif /*CONFIG_INTEL_PMC_IPC*/
-
-#endif
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 2a1442ba6e78..11d457af68c5 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -2,61 +2,69 @@
 #ifndef _ASM_X86_INTEL_SCU_IPC_H_
 #define  _ASM_X86_INTEL_SCU_IPC_H_
 
-#include <linux/notifier.h>
-
-#define IPCMSG_INDIRECT_READ	0x02
-#define IPCMSG_INDIRECT_WRITE	0x05
-
-#define IPCMSG_COLD_OFF		0x80	/* Only for Tangier */
-
-#define IPCMSG_WARM_RESET	0xF0
-#define IPCMSG_COLD_RESET	0xF1
-#define IPCMSG_SOFT_RESET	0xF2
-#define IPCMSG_COLD_BOOT	0xF3
-
-#define IPCMSG_VRTC		0xFA	 /* Set vRTC device */
-	/* Command id associated with message IPCMSG_VRTC */
-	#define IPC_CMD_VRTC_SETTIME      1 /* Set time */
-	#define IPC_CMD_VRTC_SETALARM     2 /* Set alarm */
-
-/* Read single register */
-int intel_scu_ipc_ioread8(u16 addr, u8 *data);
-
-/* Read a vector */
-int intel_scu_ipc_readv(u16 *addr, u8 *data, int len);
-
-/* Write single register */
-int intel_scu_ipc_iowrite8(u16 addr, u8 data);
-
-/* Write a vector */
-int intel_scu_ipc_writev(u16 *addr, u8 *data, int len);
-
-/* Update single register based on the mask */
-int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
-
-/* Issue commands to the SCU with or without data */
-int intel_scu_ipc_simple_command(int cmd, int sub);
-int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
-			  u32 *out, int outlen);
-
-extern struct blocking_notifier_head intel_scu_notifier;
-
-static inline void intel_scu_notifier_add(struct notifier_block *nb)
-{
-	blocking_notifier_chain_register(&intel_scu_notifier, nb);
-}
-
-static inline void intel_scu_notifier_remove(struct notifier_block *nb)
-{
-	blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
-}
-
-static inline int intel_scu_notifier_post(unsigned long v, void *p)
+#include <linux/ioport.h>
+
+struct device;
+struct intel_scu_ipc_dev;
+
+/**
+ * struct intel_scu_ipc_data - Data used to configure SCU IPC
+ * @mem: Base address of SCU IPC MMIO registers
+ * @irq: The IRQ number used for SCU (optional)
+ */
+struct intel_scu_ipc_data {
+	struct resource mem;
+	int irq;
+};
+
+struct intel_scu_ipc_dev *
+__intel_scu_ipc_register(struct device *parent,
+			 const struct intel_scu_ipc_data *scu_data,
+			 struct module *owner);
+
+#define intel_scu_ipc_register(parent, scu_data)  \
+	__intel_scu_ipc_register(parent, scu_data, THIS_MODULE)
+
+void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu);
+
+struct intel_scu_ipc_dev *
+__devm_intel_scu_ipc_register(struct device *parent,
+			      const struct intel_scu_ipc_data *scu_data,
+			      struct module *owner);
+
+#define devm_intel_scu_ipc_register(parent, scu_data)  \
+	__devm_intel_scu_ipc_register(parent, scu_data, THIS_MODULE)
+
+struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void);
+void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu);
+struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev);
+
+int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr,
+			      u8 *data);
+int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr,
+			       u8 data);
+int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr,
+			    u8 *data, size_t len);
+int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr,
+			     u8 *data, size_t len);
+
+int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr,
+			     u8 data, u8 mask);
+
+int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd,
+				     int sub);
+int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd,
+					int sub, const void *in, size_t inlen,
+					size_t size, void *out, size_t outlen);
+
+static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int cmd,
+					    int sub, const void *in, size_t inlen,
+					    void *out, size_t outlen)
 {
-	return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
+	return intel_scu_ipc_dev_command_with_size(scu, cmd, sub, in, inlen,
+						   inlen, out, outlen);
 }
 
-#define		SCU_AVAILABLE		1
-#define		SCU_DOWN		2
+#include <asm/intel_scu_ipc_legacy.h>
 
 #endif
diff --git a/arch/x86/include/asm/intel_scu_ipc_legacy.h b/arch/x86/include/asm/intel_scu_ipc_legacy.h
new file mode 100644
index 000000000000..4cf13fecb673
--- /dev/null
+++ b/arch/x86/include/asm/intel_scu_ipc_legacy.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
+#define _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
+
+#include <linux/notifier.h>
+
+#define IPCMSG_INDIRECT_READ	0x02
+#define IPCMSG_INDIRECT_WRITE	0x05
+
+#define IPCMSG_COLD_OFF		0x80	/* Only for Tangier */
+
+#define IPCMSG_WARM_RESET	0xF0
+#define IPCMSG_COLD_RESET	0xF1
+#define IPCMSG_SOFT_RESET	0xF2
+#define IPCMSG_COLD_BOOT	0xF3
+
+#define IPCMSG_VRTC		0xFA	/* Set vRTC device */
+/* Command id associated with message IPCMSG_VRTC */
+#define IPC_CMD_VRTC_SETTIME      1	/* Set time */
+#define IPC_CMD_VRTC_SETALARM     2	/* Set alarm */
+
+/* Don't call these in new code - they will be removed eventually */
+
+/* Read single register */
+static inline int intel_scu_ipc_ioread8(u16 addr, u8 *data)
+{
+	return intel_scu_ipc_dev_ioread8(NULL, addr, data);
+}
+
+/* Read a vector */
+static inline int intel_scu_ipc_readv(u16 *addr, u8 *data, int len)
+{
+	return intel_scu_ipc_dev_readv(NULL, addr, data, len);
+}
+
+/* Write single register */
+static inline int intel_scu_ipc_iowrite8(u16 addr, u8 data)
+{
+	return intel_scu_ipc_dev_iowrite8(NULL, addr, data);
+}
+
+/* Write a vector */
+static inline int intel_scu_ipc_writev(u16 *addr, u8 *data, int len)
+{
+	return intel_scu_ipc_dev_writev(NULL, addr, data, len);
+}
+
+/* Update single register based on the mask */
+static inline int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask)
+{
+	return intel_scu_ipc_dev_update(NULL, addr, data, mask);
+}
+
+/* Issue commands to the SCU with or without data */
+static inline int intel_scu_ipc_simple_command(int cmd, int sub)
+{
+	return intel_scu_ipc_dev_simple_command(NULL, cmd, sub);
+}
+
+static inline int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
+					u32 *out, int outlen)
+{
+	/* New API takes both inlen and outlen as bytes so convert here */
+	size_t inbytes = inlen * sizeof(u32);
+	size_t outbytes = outlen * sizeof(u32);
+
+	return intel_scu_ipc_dev_command_with_size(NULL, cmd, sub, in, inbytes,
+						   inlen, out, outbytes);
+}
+
+extern struct blocking_notifier_head intel_scu_notifier;
+
+static inline void intel_scu_notifier_add(struct notifier_block *nb)
+{
+	blocking_notifier_chain_register(&intel_scu_notifier, nb);
+}
+
+static inline void intel_scu_notifier_remove(struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
+}
+
+static inline int intel_scu_notifier_post(unsigned long v, void *p)
+{
+	return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
+}
+
+#define		SCU_AVAILABLE		1
+#define		SCU_DOWN		2
+
+#endif
diff --git a/arch/x86/include/asm/intel_telemetry.h b/arch/x86/include/asm/intel_telemetry.h
index 2f77e31a1283..8046e70dfd7c 100644
--- a/arch/x86/include/asm/intel_telemetry.h
+++ b/arch/x86/include/asm/intel_telemetry.h
@@ -10,6 +10,8 @@
 #define TELEM_MAX_EVENTS_SRAM		28
 #define TELEM_MAX_OS_ALLOCATED_EVENTS	20
 
+#include <asm/intel_scu_ipc.h>
+
 enum telemetry_unit {
 	TELEM_PSS = 0,
 	TELEM_IOSS,
@@ -51,6 +53,8 @@ struct telemetry_plt_config {
 	struct telemetry_unit_config ioss_config;
 	struct mutex telem_trace_lock;
 	struct mutex telem_lock;
+	struct intel_pmc_dev *pmc;
+	struct intel_scu_ipc_dev *scu;
 	bool telem_in_use;
 };
 
@@ -92,7 +96,7 @@ int telemetry_set_pltdata(const struct telemetry_core_ops *ops,
 
 int telemetry_clear_pltdata(void);
 
-int telemetry_pltconfig_valid(void);
+struct telemetry_plt_config *telemetry_get_pltdata(void);
 
 int telemetry_get_evtname(enum telemetry_unit telem_unit,
 			  const char **name, int len);
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 42a2d0d3984a..36d7d4b0ac63 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -83,6 +83,9 @@
 #define KVM_REQ_GET_VMCS12_PAGES	KVM_ARCH_REQ(24)
 #define KVM_REQ_APICV_UPDATE \
 	KVM_ARCH_REQ_FLAGS(25, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
+#define KVM_REQ_TLB_FLUSH_CURRENT	KVM_ARCH_REQ(26)
+#define KVM_REQ_HV_TLB_FLUSH \
+	KVM_ARCH_REQ_FLAGS(27, KVM_REQUEST_NO_WAKEUP)
 
 #define CR0_RESERVED_BITS                                               \
 	(~(unsigned long)(X86_CR0_PE | X86_CR0_MP | X86_CR0_EM | X86_CR0_TS \
@@ -167,6 +170,8 @@ enum kvm_reg {
 	VCPU_EXREG_CR3,
 	VCPU_EXREG_RFLAGS,
 	VCPU_EXREG_SEGMENTS,
+	VCPU_EXREG_EXIT_INFO_1,
+	VCPU_EXREG_EXIT_INFO_2,
 };
 
 enum {
@@ -372,12 +377,12 @@ struct rsvd_bits_validate {
 };
 
 struct kvm_mmu_root_info {
-	gpa_t cr3;
+	gpa_t pgd;
 	hpa_t hpa;
 };
 
 #define KVM_MMU_ROOT_INFO_INVALID \
-	((struct kvm_mmu_root_info) { .cr3 = INVALID_PAGE, .hpa = INVALID_PAGE })
+	((struct kvm_mmu_root_info) { .pgd = INVALID_PAGE, .hpa = INVALID_PAGE })
 
 #define KVM_MMU_NUM_PREV_ROOTS 3
 
@@ -403,7 +408,7 @@ struct kvm_mmu {
 	void (*update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 			   u64 *spte, const void *pte);
 	hpa_t root_hpa;
-	gpa_t root_cr3;
+	gpa_t root_pgd;
 	union kvm_mmu_role mmu_role;
 	u8 root_level;
 	u8 shadow_root_level;
@@ -865,7 +870,7 @@ struct kvm_hv {
 	u64 hv_crash_param[HV_X64_MSR_CRASH_PARAMS];
 	u64 hv_crash_ctl;
 
-	HV_REFERENCE_TSC_PAGE tsc_ref;
+	struct ms_hyperv_tsc_page tsc_ref;
 
 	struct idr conn_to_evt;
 
@@ -1101,7 +1106,8 @@ struct kvm_x86_ops {
 	unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
 	void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
 
-	void (*tlb_flush)(struct kvm_vcpu *vcpu, bool invalidate_gpa);
+	void (*tlb_flush_all)(struct kvm_vcpu *vcpu);
+	void (*tlb_flush_current)(struct kvm_vcpu *vcpu);
 	int  (*tlb_remote_flush)(struct kvm *kvm);
 	int  (*tlb_remote_flush_with_range)(struct kvm *kvm,
 			struct kvm_tlb_range *range);
@@ -1114,7 +1120,13 @@ struct kvm_x86_ops {
 	 */
 	void (*tlb_flush_gva)(struct kvm_vcpu *vcpu, gva_t addr);
 
-	void (*run)(struct kvm_vcpu *vcpu);
+	/*
+	 * Flush any TLB entries created by the guest.  Like tlb_flush_gva(),
+	 * does not need to flush GPA->HPA mappings.
+	 */
+	void (*tlb_flush_guest)(struct kvm_vcpu *vcpu);
+
+	enum exit_fastpath_completion (*run)(struct kvm_vcpu *vcpu);
 	int (*handle_exit)(struct kvm_vcpu *vcpu,
 		enum exit_fastpath_completion exit_fastpath);
 	int (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
@@ -1142,7 +1154,7 @@ struct kvm_x86_ops {
 	bool (*guest_apic_has_interrupt)(struct kvm_vcpu *vcpu);
 	void (*load_eoi_exitmap)(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
 	void (*set_virtual_apic_mode)(struct kvm_vcpu *vcpu);
-	void (*set_apic_access_page_addr)(struct kvm_vcpu *vcpu, hpa_t hpa);
+	void (*set_apic_access_page_addr)(struct kvm_vcpu *vcpu);
 	int (*deliver_posted_interrupt)(struct kvm_vcpu *vcpu, int vector);
 	int (*sync_pir_to_irr)(struct kvm_vcpu *vcpu);
 	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
@@ -1164,10 +1176,8 @@ struct kvm_x86_ops {
 			       struct x86_instruction_info *info,
 			       enum x86_intercept_stage stage,
 			       struct x86_exception *exception);
-	void (*handle_exit_irqoff)(struct kvm_vcpu *vcpu,
-		enum exit_fastpath_completion *exit_fastpath);
+	void (*handle_exit_irqoff)(struct kvm_vcpu *vcpu);
 
-	int (*check_nested_events)(struct kvm_vcpu *vcpu);
 	void (*request_immediate_exit)(struct kvm_vcpu *vcpu);
 
 	void (*sched_in)(struct kvm_vcpu *kvm, int cpu);
@@ -1200,6 +1210,7 @@ struct kvm_x86_ops {
 
 	/* pmu operations of sub-arch */
 	const struct kvm_pmu_ops *pmu_ops;
+	const struct kvm_x86_nested_ops *nested_ops;
 
 	/*
 	 * Architecture specific hooks for vCPU blocking due to
@@ -1227,14 +1238,6 @@ struct kvm_x86_ops {
 
 	void (*setup_mce)(struct kvm_vcpu *vcpu);
 
-	int (*get_nested_state)(struct kvm_vcpu *vcpu,
-				struct kvm_nested_state __user *user_kvm_nested_state,
-				unsigned user_data_size);
-	int (*set_nested_state)(struct kvm_vcpu *vcpu,
-				struct kvm_nested_state __user *user_kvm_nested_state,
-				struct kvm_nested_state *kvm_state);
-	bool (*get_vmcs12_pages)(struct kvm_vcpu *vcpu);
-
 	int (*smi_allowed)(struct kvm_vcpu *vcpu);
 	int (*pre_enter_smm)(struct kvm_vcpu *vcpu, char *smstate);
 	int (*pre_leave_smm)(struct kvm_vcpu *vcpu, const char *smstate);
@@ -1246,16 +1249,27 @@ struct kvm_x86_ops {
 
 	int (*get_msr_feature)(struct kvm_msr_entry *entry);
 
-	int (*nested_enable_evmcs)(struct kvm_vcpu *vcpu,
-				   uint16_t *vmcs_version);
-	uint16_t (*nested_get_evmcs_version)(struct kvm_vcpu *vcpu);
-
 	bool (*need_emulation_on_page_fault)(struct kvm_vcpu *vcpu);
 
 	bool (*apic_init_signal_blocked)(struct kvm_vcpu *vcpu);
 	int (*enable_direct_tlbflush)(struct kvm_vcpu *vcpu);
 };
 
+struct kvm_x86_nested_ops {
+	int (*check_events)(struct kvm_vcpu *vcpu);
+	int (*get_state)(struct kvm_vcpu *vcpu,
+			 struct kvm_nested_state __user *user_kvm_nested_state,
+			 unsigned user_data_size);
+	int (*set_state)(struct kvm_vcpu *vcpu,
+			 struct kvm_nested_state __user *user_kvm_nested_state,
+			 struct kvm_nested_state *kvm_state);
+	bool (*get_vmcs12_pages)(struct kvm_vcpu *vcpu);
+
+	int (*enable_evmcs)(struct kvm_vcpu *vcpu,
+			    uint16_t *vmcs_version);
+	uint16_t (*get_evmcs_version)(struct kvm_vcpu *vcpu);
+};
+
 struct kvm_x86_init_ops {
 	int (*cpu_has_kvm_support)(void);
 	int (*disabled_by_bios)(void);
@@ -1280,8 +1294,7 @@ extern struct kmem_cache *x86_fpu_cache;
 #define __KVM_HAVE_ARCH_VM_ALLOC
 static inline struct kvm *kvm_arch_alloc_vm(void)
 {
-	return __vmalloc(kvm_x86_ops.vm_size,
-			 GFP_KERNEL_ACCOUNT | __GFP_ZERO, PAGE_KERNEL);
+	return __vmalloc(kvm_x86_ops.vm_size, GFP_KERNEL_ACCOUNT | __GFP_ZERO);
 }
 void kvm_arch_free_vm(struct kvm *kvm);
 
@@ -1452,6 +1465,8 @@ void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_requeue_exception(struct kvm_vcpu *vcpu, unsigned nr);
 void kvm_requeue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, struct x86_exception *fault);
+bool kvm_inject_emulated_page_fault(struct kvm_vcpu *vcpu,
+				    struct x86_exception *fault);
 int kvm_read_guest_page_mmu(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 			    gfn_t gfn, void *data, int offset, int len,
 			    u32 access);
@@ -1509,8 +1524,11 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu);
 int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, u64 error_code,
 		       void *insn, int insn_len);
 void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva);
+void kvm_mmu_invalidate_gva(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
+			    gva_t gva, hpa_t root_hpa);
 void kvm_mmu_invpcid_gva(struct kvm_vcpu *vcpu, gva_t gva, unsigned long pcid);
-void kvm_mmu_new_cr3(struct kvm_vcpu *vcpu, gpa_t new_cr3, bool skip_tlb_flush);
+void kvm_mmu_new_pgd(struct kvm_vcpu *vcpu, gpa_t new_pgd, bool skip_tlb_flush,
+		     bool skip_mmu_sync);
 
 void kvm_configure_mmu(bool enable_tdp, int tdp_page_level);
 
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index f9cea081c05b..c598aaab071b 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -127,6 +127,17 @@
 #define MSR_AMD64_SMCA_MCx_DEADDR(x)	(MSR_AMD64_SMCA_MC0_DEADDR + 0x10*(x))
 #define MSR_AMD64_SMCA_MCx_MISCy(x, y)	((MSR_AMD64_SMCA_MC0_MISC1 + y) + (0x10*(x)))
 
+#define XEC(x, mask)			(((x) >> 16) & mask)
+
+/* mce.kflags flag bits for logging etc. */
+#define	MCE_HANDLED_CEC		BIT_ULL(0)
+#define	MCE_HANDLED_UC		BIT_ULL(1)
+#define	MCE_HANDLED_EXTLOG	BIT_ULL(2)
+#define	MCE_HANDLED_NFIT	BIT_ULL(3)
+#define	MCE_HANDLED_EDAC	BIT_ULL(4)
+#define	MCE_HANDLED_MCELOG	BIT_ULL(5)
+#define MCE_IN_KERNEL_RECOV	BIT_ULL(6)
+
 /*
  * This structure contains all data related to the MCE log.  Also
  * carries a signature to make it easier to find from external
@@ -142,14 +153,16 @@ struct mce_log_buffer {
 	struct mce entry[];
 };
 
+/* Highest last */
 enum mce_notifier_prios {
-	MCE_PRIO_FIRST		= INT_MAX,
-	MCE_PRIO_UC		= INT_MAX - 1,
-	MCE_PRIO_EXTLOG		= INT_MAX - 2,
-	MCE_PRIO_NFIT		= INT_MAX - 3,
-	MCE_PRIO_EDAC		= INT_MAX - 4,
-	MCE_PRIO_MCELOG		= 1,
-	MCE_PRIO_LOWEST		= 0,
+	MCE_PRIO_LOWEST,
+	MCE_PRIO_MCELOG,
+	MCE_PRIO_EDAC,
+	MCE_PRIO_NFIT,
+	MCE_PRIO_EXTLOG,
+	MCE_PRIO_UC,
+	MCE_PRIO_EARLY,
+	MCE_PRIO_CEC
 };
 
 struct notifier_block;
@@ -347,5 +360,4 @@ umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)	{ return
 #endif
 
 static inline void mce_hygon_feature_init(struct cpuinfo_x86 *c)	{ return mce_amd_feature_init(c); }
-
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/memtype.h b/arch/x86/include/asm/memtype.h
index 9c2447b3555d..9ca760e430b9 100644
--- a/arch/x86/include/asm/memtype.h
+++ b/arch/x86/include/asm/memtype.h
@@ -24,4 +24,7 @@ extern void memtype_free_io(resource_size_t start, resource_size_t end);
 
 extern bool pat_pfn_immune_to_uc_mtrr(unsigned long pfn);
 
+bool x86_has_pat_wp(void);
+enum page_cache_mode pgprot2cachemode(pgprot_t pgprot);
+
 #endif /* _ASM_X86_MEMTYPE_H */
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 4e55370e48e8..47562147e70b 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -24,21 +24,9 @@ static inline void paravirt_activate_mm(struct mm_struct *prev,
 #endif	/* !CONFIG_PARAVIRT_XXL */
 
 #ifdef CONFIG_PERF_EVENTS
-
 DECLARE_STATIC_KEY_FALSE(rdpmc_never_available_key);
 DECLARE_STATIC_KEY_FALSE(rdpmc_always_available_key);
-
-static inline void load_mm_cr4_irqsoff(struct mm_struct *mm)
-{
-	if (static_branch_unlikely(&rdpmc_always_available_key) ||
-	    (!static_branch_unlikely(&rdpmc_never_available_key) &&
-	     atomic_read(&mm->context.perf_rdpmc_allowed)))
-		cr4_set_bits_irqsoff(X86_CR4_PCE);
-	else
-		cr4_clear_bits_irqsoff(X86_CR4_PCE);
-}
-#else
-static inline void load_mm_cr4_irqsoff(struct mm_struct *mm) {}
+void cr4_update_pce(void *ignored);
 #endif
 
 #ifdef CONFIG_MODIFY_LDT_SYSCALL
@@ -225,78 +213,6 @@ static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
 	return __pkru_allows_pkey(vma_pkey(vma), write);
 }
 
-/*
- * This can be used from process context to figure out what the value of
- * CR3 is without needing to do a (slow) __read_cr3().
- *
- * It's intended to be used for code like KVM that sneakily changes CR3
- * and needs to restore it.  It needs to be used very carefully.
- */
-static inline unsigned long __get_current_cr3_fast(void)
-{
-	unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd,
-		this_cpu_read(cpu_tlbstate.loaded_mm_asid));
-
-	/* For now, be very restrictive about when this can be called. */
-	VM_WARN_ON(in_nmi() || preemptible());
-
-	VM_BUG_ON(cr3 != __read_cr3());
-	return cr3;
-}
-
-typedef struct {
-	struct mm_struct *mm;
-} temp_mm_state_t;
-
-/*
- * Using a temporary mm allows to set temporary mappings that are not accessible
- * by other CPUs. Such mappings are needed to perform sensitive memory writes
- * that override the kernel memory protections (e.g., W^X), without exposing the
- * temporary page-table mappings that are required for these write operations to
- * other CPUs. Using a temporary mm also allows to avoid TLB shootdowns when the
- * mapping is torn down.
- *
- * Context: The temporary mm needs to be used exclusively by a single core. To
- *          harden security IRQs must be disabled while the temporary mm is
- *          loaded, thereby preventing interrupt handler bugs from overriding
- *          the kernel memory protection.
- */
-static inline temp_mm_state_t use_temporary_mm(struct mm_struct *mm)
-{
-	temp_mm_state_t temp_state;
-
-	lockdep_assert_irqs_disabled();
-	temp_state.mm = this_cpu_read(cpu_tlbstate.loaded_mm);
-	switch_mm_irqs_off(NULL, mm, current);
-
-	/*
-	 * If breakpoints are enabled, disable them while the temporary mm is
-	 * used. Userspace might set up watchpoints on addresses that are used
-	 * in the temporary mm, which would lead to wrong signals being sent or
-	 * crashes.
-	 *
-	 * Note that breakpoints are not disabled selectively, which also causes
-	 * kernel breakpoints (e.g., perf's) to be disabled. This might be
-	 * undesirable, but still seems reasonable as the code that runs in the
-	 * temporary mm should be short.
-	 */
-	if (hw_breakpoint_active())
-		hw_breakpoint_disable();
-
-	return temp_state;
-}
-
-static inline void unuse_temporary_mm(temp_mm_state_t prev_state)
-{
-	lockdep_assert_irqs_disabled();
-	switch_mm_irqs_off(NULL, prev_state.mm, current);
-
-	/*
-	 * Restore the breakpoints if they were disabled before the temporary mm
-	 * was loaded.
-	 */
-	if (hw_breakpoint_active())
-		hw_breakpoint_restore();
-}
+unsigned long __get_current_cr3_fast(void);
 
 #endif /* _ASM_X86_MMU_CONTEXT_H */
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 1c42ecbe75cb..d30805ed323e 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -35,6 +35,8 @@ typedef int (*hyperv_fill_flush_list_func)(
 	rdmsrl(HV_X64_MSR_SINT0 + int_num, val)
 #define hv_set_synint_state(int_num, val) \
 	wrmsrl(HV_X64_MSR_SINT0 + int_num, val)
+#define hv_recommend_using_aeoi() \
+	(!(ms_hyperv.hints & HV_DEPRECATING_AEOI_RECOMMENDED))
 
 #define hv_get_crash_ctl(val) \
 	rdmsrl(HV_X64_MSR_CRASH_CTL, val)
diff --git a/arch/x86/include/asm/orc_types.h b/arch/x86/include/asm/orc_types.h
index 6e060907c163..d25534940bde 100644
--- a/arch/x86/include/asm/orc_types.h
+++ b/arch/x86/include/asm/orc_types.h
@@ -58,8 +58,7 @@
 #define ORC_TYPE_CALL			0
 #define ORC_TYPE_REGS			1
 #define ORC_TYPE_REGS_IRET		2
-#define UNWIND_HINT_TYPE_SAVE		3
-#define UNWIND_HINT_TYPE_RESTORE	4
+#define UNWIND_HINT_TYPE_RET_OFFSET	3
 
 #ifndef __ASSEMBLY__
 /*
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 694d8daf4983..5ca5d297df75 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -47,7 +47,13 @@ static inline void slow_down_io(void)
 #endif
 }
 
-static inline void __flush_tlb(void)
+void native_flush_tlb_local(void);
+void native_flush_tlb_global(void);
+void native_flush_tlb_one_user(unsigned long addr);
+void native_flush_tlb_others(const struct cpumask *cpumask,
+			     const struct flush_tlb_info *info);
+
+static inline void __flush_tlb_local(void)
 {
 	PVOP_VCALL0(mmu.flush_tlb_user);
 }
@@ -62,8 +68,8 @@ static inline void __flush_tlb_one_user(unsigned long addr)
 	PVOP_VCALL1(mmu.flush_tlb_one_user, addr);
 }
 
-static inline void flush_tlb_others(const struct cpumask *cpumask,
-				    const struct flush_tlb_info *info)
+static inline void __flush_tlb_others(const struct cpumask *cpumask,
+				      const struct flush_tlb_info *info)
 {
 	PVOP_VCALL2(mmu.flush_tlb_others, cpumask, info);
 }
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 4d02e64af1b3..f51d8997ed00 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -624,7 +624,7 @@ static inline pud_t pfn_pud(unsigned long page_nr, pgprot_t pgprot)
 	return __pud(pfn | check_pgprot(pgprot));
 }
 
-static inline pmd_t pmd_mknotpresent(pmd_t pmd)
+static inline pmd_t pmd_mkinvalid(pmd_t pmd)
 {
 	return pfn_pmd(pmd_pfn(pmd),
 		      __pgprot(pmd_flags(pmd) & ~(_PAGE_PRESENT|_PAGE_PROTNONE)));
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 0dca7f7aeff2..bd2ed47cb067 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -60,7 +60,7 @@ void sync_initial_page_table(void);
 #define kpte_clear_flush(ptep, vaddr)		\
 do {						\
 	pte_clear(&init_mm, (vaddr), (ptep));	\
-	__flush_tlb_one_kernel((vaddr));		\
+	flush_tlb_one_kernel((vaddr));		\
 } while (0)
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index df1373415f11..8d03ffd43794 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -53,6 +53,12 @@ static inline void sync_initial_page_table(void) { }
 
 struct mm_struct;
 
+#define mm_p4d_folded mm_p4d_folded
+static inline bool mm_p4d_folded(struct mm_struct *mm)
+{
+	return !pgtable_l5_enabled();
+}
+
 void set_pte_vaddr_p4d(p4d_t *p4d_page, unsigned long vaddr, pte_t new_pte);
 void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte);
 
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index b6606fe6cfdf..2da1f95b88d7 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -194,7 +194,6 @@ enum page_cache_mode {
 #define _PAGE_TABLE_NOENC	 (__PP|__RW|_USR|___A|   0|___D|   0|   0)
 #define _PAGE_TABLE		 (__PP|__RW|_USR|___A|   0|___D|   0|   0| _ENC)
 #define __PAGE_KERNEL_RO	 (__PP|   0|   0|___A|__NX|___D|   0|___G)
-#define __PAGE_KERNEL_RX	 (__PP|   0|   0|___A|   0|___D|   0|___G)
 #define __PAGE_KERNEL_NOCACHE	 (__PP|__RW|   0|___A|__NX|___D|   0|___G| __NC)
 #define __PAGE_KERNEL_VVAR	 (__PP|   0|_USR|___A|__NX|___D|   0|___G)
 #define __PAGE_KERNEL_LARGE	 (__PP|__RW|   0|___A|__NX|___D|_PSE|___G)
@@ -220,7 +219,6 @@ enum page_cache_mode {
 #define PAGE_KERNEL_RO		__pgprot_mask(__PAGE_KERNEL_RO         | _ENC)
 #define PAGE_KERNEL_EXEC	__pgprot_mask(__PAGE_KERNEL_EXEC       | _ENC)
 #define PAGE_KERNEL_EXEC_NOENC	__pgprot_mask(__PAGE_KERNEL_EXEC       |    0)
-#define PAGE_KERNEL_RX		__pgprot_mask(__PAGE_KERNEL_RX         | _ENC)
 #define PAGE_KERNEL_NOCACHE	__pgprot_mask(__PAGE_KERNEL_NOCACHE    | _ENC)
 #define PAGE_KERNEL_LARGE	__pgprot_mask(__PAGE_KERNEL_LARGE      | _ENC)
 #define PAGE_KERNEL_LARGE_EXEC	__pgprot_mask(__PAGE_KERNEL_LARGE_EXEC | _ENC)
@@ -284,6 +282,12 @@ typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
 
 typedef struct { pgdval_t pgd; } pgd_t;
 
+static inline pgprot_t pgprot_nx(pgprot_t prot)
+{
+	return __pgprot(pgprot_val(prot) | _PAGE_NX);
+}
+#define pgprot_nx pgprot_nx
+
 #ifdef CONFIG_X86_PAE
 
 /*
@@ -467,9 +471,6 @@ static inline pteval_t pte_flags(pte_t pte)
 	return native_pte_val(pte) & PTE_FLAGS_MASK;
 }
 
-extern uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM];
-extern uint8_t __pte2cachemode_tbl[8];
-
 #define __pte2cm_idx(cb)				\
 	((((cb) >> (_PAGE_BIT_PAT - 2)) & 4) |		\
 	 (((cb) >> (_PAGE_BIT_PCD - 1)) & 2) |		\
@@ -479,43 +480,26 @@ extern uint8_t __pte2cachemode_tbl[8];
 	 (((i) & 2) << (_PAGE_BIT_PCD - 1)) |		\
 	 (((i) & 1) << _PAGE_BIT_PWT))
 
-static inline unsigned long cachemode2protval(enum page_cache_mode pcm)
-{
-	if (likely(pcm == 0))
-		return 0;
-	return __cachemode2pte_tbl[pcm];
-}
-static inline pgprot_t cachemode2pgprot(enum page_cache_mode pcm)
+unsigned long cachemode2protval(enum page_cache_mode pcm);
+
+static inline pgprotval_t protval_4k_2_large(pgprotval_t val)
 {
-	return __pgprot(cachemode2protval(pcm));
+	return (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
+		((val & _PAGE_PAT) << (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
 }
-static inline enum page_cache_mode pgprot2cachemode(pgprot_t pgprot)
+static inline pgprot_t pgprot_4k_2_large(pgprot_t pgprot)
 {
-	unsigned long masked;
-
-	masked = pgprot_val(pgprot) & _PAGE_CACHE_MASK;
-	if (likely(masked == 0))
-		return 0;
-	return __pte2cachemode_tbl[__pte2cm_idx(masked)];
+	return __pgprot(protval_4k_2_large(pgprot_val(pgprot)));
 }
-static inline pgprot_t pgprot_4k_2_large(pgprot_t pgprot)
+static inline pgprotval_t protval_large_2_4k(pgprotval_t val)
 {
-	pgprotval_t val = pgprot_val(pgprot);
-	pgprot_t new;
-
-	pgprot_val(new) = (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
-		((val & _PAGE_PAT) << (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
-	return new;
+	return (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
+		((val & _PAGE_PAT_LARGE) >>
+		 (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
 }
 static inline pgprot_t pgprot_large_2_4k(pgprot_t pgprot)
 {
-	pgprotval_t val = pgprot_val(pgprot);
-	pgprot_t new;
-
-	pgprot_val(new) = (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
-			  ((val & _PAGE_PAT_LARGE) >>
-			   (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
-	return new;
+	return __pgprot(protval_large_2_4k(pgprot_val(pgprot)));
 }
 
 
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 3bcf27caf6c9..3eeaaeb75638 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -727,7 +727,6 @@ static inline void sync_core(void)
 	unsigned int tmp;
 
 	asm volatile (
-		UNWIND_HINT_SAVE
 		"mov %%ss, %0\n\t"
 		"pushq %q0\n\t"
 		"pushq %%rsp\n\t"
@@ -737,7 +736,6 @@ static inline void sync_core(void)
 		"pushq %q0\n\t"
 		"pushq $1f\n\t"
 		"iretq\n\t"
-		UNWIND_HINT_RESTORE
 		"1:"
 		: "=&r" (tmp), ASM_CALL_CONSTRAINT : : "cc", "memory");
 #endif
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index 91e29b6a86a5..9804a7957f4e 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -55,8 +55,13 @@
 /*
  * Initialize the stackprotector canary value.
  *
- * NOTE: this must only be called from functions that never return,
+ * NOTE: this must only be called from functions that never return
  * and it must always be inlined.
+ *
+ * In addition, it should be called from a compilation unit for which
+ * stack protector is disabled. Alternatively, the caller should not end
+ * with a function call which gets tail-call optimized as that would
+ * lead to checking a modified canary value.
  */
 static __always_inline void boot_init_stack_canary(void)
 {
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index 14db05086bbf..5ae5a68e469d 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -87,7 +87,7 @@ get_stack_pointer(struct task_struct *task, struct pt_regs *regs)
 }
 
 void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-			unsigned long *stack, char *log_lvl);
+			unsigned long *stack, const char *log_lvl);
 
 /* The form of the top of the frame on the stack */
 struct stack_frame {
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 6f66d841262d..8c87a2e0b660 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -13,140 +13,51 @@
 #include <asm/pti.h>
 #include <asm/processor-flags.h>
 
-/*
- * The x86 feature is called PCID (Process Context IDentifier). It is similar
- * to what is traditionally called ASID on the RISC processors.
- *
- * We don't use the traditional ASID implementation, where each process/mm gets
- * its own ASID and flush/restart when we run out of ASID space.
- *
- * Instead we have a small per-cpu array of ASIDs and cache the last few mm's
- * that came by on this CPU, allowing cheaper switch_mm between processes on
- * this CPU.
- *
- * We end up with different spaces for different things. To avoid confusion we
- * use different names for each of them:
- *
- * ASID  - [0, TLB_NR_DYN_ASIDS-1]
- *         the canonical identifier for an mm
- *
- * kPCID - [1, TLB_NR_DYN_ASIDS]
- *         the value we write into the PCID part of CR3; corresponds to the
- *         ASID+1, because PCID 0 is special.
- *
- * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS]
- *         for KPTI each mm has two address spaces and thus needs two
- *         PCID values, but we can still do with a single ASID denomination
- *         for each mm. Corresponds to kPCID + 2048.
- *
- */
-
-/* There are 12 bits of space for ASIDS in CR3 */
-#define CR3_HW_ASID_BITS		12
-
-/*
- * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for
- * user/kernel switches
- */
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-# define PTI_CONSUMED_PCID_BITS	1
-#else
-# define PTI_CONSUMED_PCID_BITS	0
-#endif
+void __flush_tlb_all(void);
 
-#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS)
+#define TLB_FLUSH_ALL	-1UL
 
-/*
- * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid.  -1 below to account
- * for them being zero-based.  Another -1 is because PCID 0 is reserved for
- * use by non-PCID-aware users.
- */
-#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2)
+void cr4_update_irqsoff(unsigned long set, unsigned long clear);
+unsigned long cr4_read_shadow(void);
 
-/*
- * 6 because 6 should be plenty and struct tlb_state will fit in two cache
- * lines.
- */
-#define TLB_NR_DYN_ASIDS	6
-
-/*
- * Given @asid, compute kPCID
- */
-static inline u16 kern_pcid(u16 asid)
+/* Set in this cpu's CR4. */
+static inline void cr4_set_bits_irqsoff(unsigned long mask)
 {
-	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
-
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-	/*
-	 * Make sure that the dynamic ASID space does not confict with the
-	 * bit we are using to switch between user and kernel ASIDs.
-	 */
-	BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT));
-
-	/*
-	 * The ASID being passed in here should have respected the
-	 * MAX_ASID_AVAILABLE and thus never have the switch bit set.
-	 */
-	VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT));
-#endif
-	/*
-	 * The dynamically-assigned ASIDs that get passed in are small
-	 * (<TLB_NR_DYN_ASIDS).  They never have the high switch bit set,
-	 * so do not bother to clear it.
-	 *
-	 * If PCID is on, ASID-aware code paths put the ASID+1 into the
-	 * PCID bits.  This serves two purposes.  It prevents a nasty
-	 * situation in which PCID-unaware code saves CR3, loads some other
-	 * value (with PCID == 0), and then restores CR3, thus corrupting
-	 * the TLB for ASID 0 if the saved ASID was nonzero.  It also means
-	 * that any bugs involving loading a PCID-enabled CR3 with
-	 * CR4.PCIDE off will trigger deterministically.
-	 */
-	return asid + 1;
+	cr4_update_irqsoff(mask, 0);
 }
 
-/*
- * Given @asid, compute uPCID
- */
-static inline u16 user_pcid(u16 asid)
+/* Clear in this cpu's CR4. */
+static inline void cr4_clear_bits_irqsoff(unsigned long mask)
 {
-	u16 ret = kern_pcid(asid);
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-	ret |= 1 << X86_CR3_PTI_PCID_USER_BIT;
-#endif
-	return ret;
+	cr4_update_irqsoff(0, mask);
 }
 
-struct pgd_t;
-static inline unsigned long build_cr3(pgd_t *pgd, u16 asid)
+/* Set in this cpu's CR4. */
+static inline void cr4_set_bits(unsigned long mask)
 {
-	if (static_cpu_has(X86_FEATURE_PCID)) {
-		return __sme_pa(pgd) | kern_pcid(asid);
-	} else {
-		VM_WARN_ON_ONCE(asid != 0);
-		return __sme_pa(pgd);
-	}
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cr4_set_bits_irqsoff(mask);
+	local_irq_restore(flags);
 }
 
-static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
+/* Clear in this cpu's CR4. */
+static inline void cr4_clear_bits(unsigned long mask)
 {
-	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
-	/*
-	 * Use boot_cpu_has() instead of this_cpu_has() as this function
-	 * might be called during early boot. This should work even after
-	 * boot because all CPU's the have same capabilities:
-	 */
-	VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
-	return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cr4_clear_bits_irqsoff(mask);
+	local_irq_restore(flags);
 }
 
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define __flush_tlb() __native_flush_tlb()
-#define __flush_tlb_global() __native_flush_tlb_global()
-#define __flush_tlb_one_user(addr) __native_flush_tlb_one_user(addr)
-#endif
+#ifndef MODULE
+/*
+ * 6 because 6 should be plenty and struct tlb_state will fit in two cache
+ * lines.
+ */
+#define TLB_NR_DYN_ASIDS	6
 
 struct tlb_context {
 	u64 ctx_id;
@@ -242,38 +153,7 @@ struct tlb_state {
 };
 DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
 
-/*
- * Blindly accessing user memory from NMI context can be dangerous
- * if we're in the middle of switching the current user task or
- * switching the loaded mm.  It can also be dangerous if we
- * interrupted some kernel code that was temporarily using a
- * different mm.
- */
-static inline bool nmi_uaccess_okay(void)
-{
-	struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
-	struct mm_struct *current_mm = current->mm;
-
-	VM_WARN_ON_ONCE(!loaded_mm);
-
-	/*
-	 * The condition we want to check is
-	 * current_mm->pgd == __va(read_cr3_pa()).  This may be slow, though,
-	 * if we're running in a VM with shadow paging, and nmi_uaccess_okay()
-	 * is supposed to be reasonably fast.
-	 *
-	 * Instead, we check the almost equivalent but somewhat conservative
-	 * condition below, and we rely on the fact that switch_mm_irqs_off()
-	 * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3.
-	 */
-	if (loaded_mm != current_mm)
-		return false;
-
-	VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa()));
-
-	return true;
-}
-
+bool nmi_uaccess_okay(void);
 #define nmi_uaccess_okay nmi_uaccess_okay
 
 /* Initialize cr4 shadow for this CPU. */
@@ -282,249 +162,11 @@ static inline void cr4_init_shadow(void)
 	this_cpu_write(cpu_tlbstate.cr4, __read_cr4());
 }
 
-static inline void __cr4_set(unsigned long cr4)
-{
-	lockdep_assert_irqs_disabled();
-	this_cpu_write(cpu_tlbstate.cr4, cr4);
-	__write_cr4(cr4);
-}
-
-/* Set in this cpu's CR4. */
-static inline void cr4_set_bits_irqsoff(unsigned long mask)
-{
-	unsigned long cr4;
-
-	cr4 = this_cpu_read(cpu_tlbstate.cr4);
-	if ((cr4 | mask) != cr4)
-		__cr4_set(cr4 | mask);
-}
-
-/* Clear in this cpu's CR4. */
-static inline void cr4_clear_bits_irqsoff(unsigned long mask)
-{
-	unsigned long cr4;
-
-	cr4 = this_cpu_read(cpu_tlbstate.cr4);
-	if ((cr4 & ~mask) != cr4)
-		__cr4_set(cr4 & ~mask);
-}
-
-/* Set in this cpu's CR4. */
-static inline void cr4_set_bits(unsigned long mask)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	cr4_set_bits_irqsoff(mask);
-	local_irq_restore(flags);
-}
-
-/* Clear in this cpu's CR4. */
-static inline void cr4_clear_bits(unsigned long mask)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	cr4_clear_bits_irqsoff(mask);
-	local_irq_restore(flags);
-}
-
-static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
-{
-	unsigned long cr4;
-
-	cr4 = this_cpu_read(cpu_tlbstate.cr4);
-	__cr4_set(cr4 ^ mask);
-}
-
-/* Read the CR4 shadow. */
-static inline unsigned long cr4_read_shadow(void)
-{
-	return this_cpu_read(cpu_tlbstate.cr4);
-}
-
-/*
- * Mark all other ASIDs as invalid, preserves the current.
- */
-static inline void invalidate_other_asid(void)
-{
-	this_cpu_write(cpu_tlbstate.invalidate_other, true);
-}
-
-/*
- * Save some of cr4 feature set we're using (e.g.  Pentium 4MB
- * enable and PPro Global page enable), so that any CPU's that boot
- * up after us can get the correct flags.  This should only be used
- * during boot on the boot cpu.
- */
 extern unsigned long mmu_cr4_features;
 extern u32 *trampoline_cr4_features;
 
-static inline void cr4_set_bits_and_update_boot(unsigned long mask)
-{
-	mmu_cr4_features |= mask;
-	if (trampoline_cr4_features)
-		*trampoline_cr4_features = mmu_cr4_features;
-	cr4_set_bits(mask);
-}
-
 extern void initialize_tlbstate_and_flush(void);
 
-/*
- * Given an ASID, flush the corresponding user ASID.  We can delay this
- * until the next time we switch to it.
- *
- * See SWITCH_TO_USER_CR3.
- */
-static inline void invalidate_user_asid(u16 asid)
-{
-	/* There is no user ASID if address space separation is off */
-	if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION))
-		return;
-
-	/*
-	 * We only have a single ASID if PCID is off and the CR3
-	 * write will have flushed it.
-	 */
-	if (!cpu_feature_enabled(X86_FEATURE_PCID))
-		return;
-
-	if (!static_cpu_has(X86_FEATURE_PTI))
-		return;
-
-	__set_bit(kern_pcid(asid),
-		  (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask));
-}
-
-/*
- * flush the entire current user mapping
- */
-static inline void __native_flush_tlb(void)
-{
-	/*
-	 * Preemption or interrupts must be disabled to protect the access
-	 * to the per CPU variable and to prevent being preempted between
-	 * read_cr3() and write_cr3().
-	 */
-	WARN_ON_ONCE(preemptible());
-
-	invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid));
-
-	/* If current->mm == NULL then the read_cr3() "borrows" an mm */
-	native_write_cr3(__native_read_cr3());
-}
-
-/*
- * flush everything
- */
-static inline void __native_flush_tlb_global(void)
-{
-	unsigned long cr4, flags;
-
-	if (static_cpu_has(X86_FEATURE_INVPCID)) {
-		/*
-		 * Using INVPCID is considerably faster than a pair of writes
-		 * to CR4 sandwiched inside an IRQ flag save/restore.
-		 *
-		 * Note, this works with CR4.PCIDE=0 or 1.
-		 */
-		invpcid_flush_all();
-		return;
-	}
-
-	/*
-	 * Read-modify-write to CR4 - protect it from preemption and
-	 * from interrupts. (Use the raw variant because this code can
-	 * be called from deep inside debugging code.)
-	 */
-	raw_local_irq_save(flags);
-
-	cr4 = this_cpu_read(cpu_tlbstate.cr4);
-	/* toggle PGE */
-	native_write_cr4(cr4 ^ X86_CR4_PGE);
-	/* write old PGE again and flush TLBs */
-	native_write_cr4(cr4);
-
-	raw_local_irq_restore(flags);
-}
-
-/*
- * flush one page in the user mapping
- */
-static inline void __native_flush_tlb_one_user(unsigned long addr)
-{
-	u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
-
-	asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
-
-	if (!static_cpu_has(X86_FEATURE_PTI))
-		return;
-
-	/*
-	 * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1.
-	 * Just use invalidate_user_asid() in case we are called early.
-	 */
-	if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE))
-		invalidate_user_asid(loaded_mm_asid);
-	else
-		invpcid_flush_one(user_pcid(loaded_mm_asid), addr);
-}
-
-/*
- * flush everything
- */
-static inline void __flush_tlb_all(void)
-{
-	/*
-	 * This is to catch users with enabled preemption and the PGE feature
-	 * and don't trigger the warning in __native_flush_tlb().
-	 */
-	VM_WARN_ON_ONCE(preemptible());
-
-	if (boot_cpu_has(X86_FEATURE_PGE)) {
-		__flush_tlb_global();
-	} else {
-		/*
-		 * !PGE -> !PCID (setup_pcid()), thus every flush is total.
-		 */
-		__flush_tlb();
-	}
-}
-
-/*
- * flush one page in the kernel mapping
- */
-static inline void __flush_tlb_one_kernel(unsigned long addr)
-{
-	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
-
-	/*
-	 * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its
-	 * paravirt equivalent.  Even with PCID, this is sufficient: we only
-	 * use PCID if we also use global PTEs for the kernel mapping, and
-	 * INVLPG flushes global translations across all address spaces.
-	 *
-	 * If PTI is on, then the kernel is mapped with non-global PTEs, and
-	 * __flush_tlb_one_user() will flush the given address for the current
-	 * kernel address space and for its usermode counterpart, but it does
-	 * not flush it for other address spaces.
-	 */
-	__flush_tlb_one_user(addr);
-
-	if (!static_cpu_has(X86_FEATURE_PTI))
-		return;
-
-	/*
-	 * See above.  We need to propagate the flush to all other address
-	 * spaces.  In principle, we only need to propagate it to kernelmode
-	 * address spaces, but the extra bookkeeping we would need is not
-	 * worth it.
-	 */
-	invalidate_other_asid();
-}
-
-#define TLB_FLUSH_ALL	-1UL
-
 /*
  * TLB flushing:
  *
@@ -563,7 +205,15 @@ struct flush_tlb_info {
 	bool			freed_tables;
 };
 
-#define local_flush_tlb() __flush_tlb()
+void flush_tlb_local(void);
+void flush_tlb_one_user(unsigned long addr);
+void flush_tlb_one_kernel(unsigned long addr);
+void flush_tlb_others(const struct cpumask *cpumask,
+		      const struct flush_tlb_info *info);
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#endif
 
 #define flush_tlb_mm(mm)						\
 		flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL, true)
@@ -585,9 +235,6 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long a)
 	flush_tlb_mm_range(vma->vm_mm, a, a + PAGE_SIZE, PAGE_SHIFT, false);
 }
 
-void native_flush_tlb_others(const struct cpumask *cpumask,
-			     const struct flush_tlb_info *info);
-
 static inline u64 inc_mm_tlb_gen(struct mm_struct *mm)
 {
 	/*
@@ -608,12 +255,6 @@ static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch,
 
 extern void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch);
 
-#ifndef CONFIG_PARAVIRT
-#define flush_tlb_others(mask, info)	\
-	native_flush_tlb_others(mask, info)
-
-#define paravirt_tlb_remove_table(tlb, page) \
-	tlb_remove_page(tlb, (void *)(page))
-#endif
+#endif /* !MODULE */
 
 #endif /* _ASM_X86_TLBFLUSH_H */
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index c26a7e1d8a2c..70bd0f356e5d 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -69,9 +69,7 @@ dotraplinkage void do_overflow(struct pt_regs *regs, long error_code);
 dotraplinkage void do_bounds(struct pt_regs *regs, long error_code);
 dotraplinkage void do_invalid_op(struct pt_regs *regs, long error_code);
 dotraplinkage void do_device_not_available(struct pt_regs *regs, long error_code);
-#if defined(CONFIG_X86_64) || defined(CONFIG_DOUBLEFAULT)
 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code, unsigned long cr2);
-#endif
 dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *regs, long error_code);
 dotraplinkage void do_invalid_TSS(struct pt_regs *regs, long error_code);
 dotraplinkage void do_segment_not_present(struct pt_regs *regs, long error_code);
diff --git a/arch/x86/include/asm/unwind.h b/arch/x86/include/asm/unwind.h
index 499578f7e6d7..70fc159ebe69 100644
--- a/arch/x86/include/asm/unwind.h
+++ b/arch/x86/include/asm/unwind.h
@@ -19,7 +19,7 @@ struct unwind_state {
 #if defined(CONFIG_UNWINDER_ORC)
 	bool signal, full_regs;
 	unsigned long sp, bp, ip;
-	struct pt_regs *regs;
+	struct pt_regs *regs, *prev_regs;
 #elif defined(CONFIG_UNWINDER_FRAME_POINTER)
 	bool got_irq;
 	unsigned long *bp, *orig_sp, ip;
diff --git a/arch/x86/include/asm/unwind_hints.h b/arch/x86/include/asm/unwind_hints.h
index f5e2eb12cb71..7d903fdb3f43 100644
--- a/arch/x86/include/asm/unwind_hints.h
+++ b/arch/x86/include/asm/unwind_hints.h
@@ -86,32 +86,15 @@
 	UNWIND_HINT sp_offset=\sp_offset
 .endm
 
-.macro UNWIND_HINT_SAVE
-	UNWIND_HINT type=UNWIND_HINT_TYPE_SAVE
-.endm
-
-.macro UNWIND_HINT_RESTORE
-	UNWIND_HINT type=UNWIND_HINT_TYPE_RESTORE
+/*
+ * RET_OFFSET: Used on instructions that terminate a function; mostly RETURN
+ * and sibling calls. On these, sp_offset denotes the expected offset from
+ * initial_func_cfi.
+ */
+.macro UNWIND_HINT_RET_OFFSET sp_offset=8
+	UNWIND_HINT type=UNWIND_HINT_TYPE_RET_OFFSET sp_offset=\sp_offset
 .endm
 
-#else /* !__ASSEMBLY__ */
-
-#define UNWIND_HINT(sp_reg, sp_offset, type, end)		\
-	"987: \n\t"						\
-	".pushsection .discard.unwind_hints\n\t"		\
-	/* struct unwind_hint */				\
-	".long 987b - .\n\t"					\
-	".short " __stringify(sp_offset) "\n\t"			\
-	".byte " __stringify(sp_reg) "\n\t"			\
-	".byte " __stringify(type) "\n\t"			\
-	".byte " __stringify(end) "\n\t"			\
-	".balign 4 \n\t"					\
-	".popsection\n\t"
-
-#define UNWIND_HINT_SAVE UNWIND_HINT(0, 0, UNWIND_HINT_TYPE_SAVE, 0)
-
-#define UNWIND_HINT_RESTORE UNWIND_HINT(0, 0, UNWIND_HINT_TYPE_RESTORE, 0)
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_X86_UNWIND_HINTS_H */
diff --git a/arch/x86/include/uapi/asm/mce.h b/arch/x86/include/uapi/asm/mce.h
index 955c2a2e1cf9..db9adc081c5a 100644
--- a/arch/x86/include/uapi/asm/mce.h
+++ b/arch/x86/include/uapi/asm/mce.h
@@ -35,6 +35,7 @@ struct mce {
 	__u64 ipid;		/* MCA_IPID MSR: only valid on SMCA systems */
 	__u64 ppin;		/* Protected Processor Inventory Number */
 	__u32 microcode;	/* Microcode revision */
+	__u64 kflags;		/* Internal kernel use */
 };
 
 #define MCE_GET_RECORD_LEN   _IOR('M', 1, int)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index ba89cabe5fcf..92e1261ec4ec 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -28,6 +28,10 @@ KASAN_SANITIZE_dumpstack_$(BITS).o			:= n
 KASAN_SANITIZE_stacktrace.o				:= n
 KASAN_SANITIZE_paravirt.o				:= n
 
+# With some compiler versions the generated code results in boot hangs, caused
+# by several compilation units. To be safe, disable all instrumentation.
+KCSAN_SANITIZE := n
+
 OBJECT_FILES_NON_STANDARD_test_nx.o			:= y
 OBJECT_FILES_NON_STANDARD_paravirt_patch.o		:= y
 
@@ -102,9 +106,7 @@ obj-$(CONFIG_KEXEC_FILE)	+= kexec-bzimage64.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-y				+= kprobes/
 obj-$(CONFIG_MODULES)		+= module.o
-ifeq ($(CONFIG_X86_32),y)
-obj-$(CONFIG_DOUBLEFAULT)	+= doublefault_32.o
-endif
+obj-$(CONFIG_X86_32)		+= doublefault_32.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_VM86)		+= vm86_32.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 7867dfb3963e..cd617979b7fc 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -783,6 +783,61 @@ void __init_or_module text_poke_early(void *addr, const void *opcode,
 	}
 }
 
+typedef struct {
+	struct mm_struct *mm;
+} temp_mm_state_t;
+
+/*
+ * Using a temporary mm allows to set temporary mappings that are not accessible
+ * by other CPUs. Such mappings are needed to perform sensitive memory writes
+ * that override the kernel memory protections (e.g., W^X), without exposing the
+ * temporary page-table mappings that are required for these write operations to
+ * other CPUs. Using a temporary mm also allows to avoid TLB shootdowns when the
+ * mapping is torn down.
+ *
+ * Context: The temporary mm needs to be used exclusively by a single core. To
+ *          harden security IRQs must be disabled while the temporary mm is
+ *          loaded, thereby preventing interrupt handler bugs from overriding
+ *          the kernel memory protection.
+ */
+static inline temp_mm_state_t use_temporary_mm(struct mm_struct *mm)
+{
+	temp_mm_state_t temp_state;
+
+	lockdep_assert_irqs_disabled();
+	temp_state.mm = this_cpu_read(cpu_tlbstate.loaded_mm);
+	switch_mm_irqs_off(NULL, mm, current);
+
+	/*
+	 * If breakpoints are enabled, disable them while the temporary mm is
+	 * used. Userspace might set up watchpoints on addresses that are used
+	 * in the temporary mm, which would lead to wrong signals being sent or
+	 * crashes.
+	 *
+	 * Note that breakpoints are not disabled selectively, which also causes
+	 * kernel breakpoints (e.g., perf's) to be disabled. This might be
+	 * undesirable, but still seems reasonable as the code that runs in the
+	 * temporary mm should be short.
+	 */
+	if (hw_breakpoint_active())
+		hw_breakpoint_disable();
+
+	return temp_state;
+}
+
+static inline void unuse_temporary_mm(temp_mm_state_t prev_state)
+{
+	lockdep_assert_irqs_disabled();
+	switch_mm_irqs_off(NULL, prev_state.mm, current);
+
+	/*
+	 * Restore the breakpoints if they were disabled before the temporary mm
+	 * was loaded.
+	 */
+	if (hw_breakpoint_active())
+		hw_breakpoint_restore();
+}
+
 __ro_after_init struct mm_struct *poking_mm;
 __ro_after_init unsigned long poking_addr;
 
diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c
index 16133819415c..5f816861f5d2 100644
--- a/arch/x86/kernel/amd_gart_64.c
+++ b/arch/x86/kernel/amd_gart_64.c
@@ -159,7 +159,7 @@ static void dump_leak(void)
 		return;
 	dump = 1;
 
-	show_stack(NULL, NULL);
+	show_stack(NULL, NULL, KERN_ERR);
 	debug_dma_dump_mappings(NULL);
 }
 #endif
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 7dc4ad68eb41..dba6a83bc349 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -13,6 +13,9 @@ endif
 KCOV_INSTRUMENT_common.o := n
 KCOV_INSTRUMENT_perf_event.o := n
 
+# As above, instrumenting secondary CPU boot code causes boot hangs.
+KCSAN_SANITIZE_common.o := n
+
 # Make sure load_percpu_segment has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_common.o		:= $(nostackp)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index bed0cb83fe24..eab3ebd22927 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -387,7 +387,30 @@ void native_write_cr4(unsigned long val)
 			  bits_missing);
 	}
 }
-EXPORT_SYMBOL(native_write_cr4);
+#if IS_MODULE(CONFIG_LKDTM)
+EXPORT_SYMBOL_GPL(native_write_cr4);
+#endif
+
+void cr4_update_irqsoff(unsigned long set, unsigned long clear)
+{
+	unsigned long newval, cr4 = this_cpu_read(cpu_tlbstate.cr4);
+
+	lockdep_assert_irqs_disabled();
+
+	newval = (cr4 & ~clear) | set;
+	if (newval != cr4) {
+		this_cpu_write(cpu_tlbstate.cr4, newval);
+		__write_cr4(newval);
+	}
+}
+EXPORT_SYMBOL(cr4_update_irqsoff);
+
+/* Read the CR4 shadow. */
+unsigned long cr4_read_shadow(void)
+{
+	return this_cpu_read(cpu_tlbstate.cr4);
+}
+EXPORT_SYMBOL_GPL(cr4_read_shadow);
 
 void cr4_init(void)
 {
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index 52de616a8065..ea3cf714b7ad 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -192,7 +192,12 @@ EXPORT_SYMBOL_GPL(smca_banks);
 static char buf_mcatype[MAX_MCATYPE_NAME_LEN];
 
 static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
-static DEFINE_PER_CPU(unsigned int, bank_map);	/* see which banks are on */
+
+/*
+ * A list of the banks enabled on each logical CPU. Controls which respective
+ * descriptors to initialize later in mce_threshold_create_device().
+ */
+static DEFINE_PER_CPU(unsigned int, bank_map);
 
 /* Map of banks that have more than MCA_MISC0 available. */
 static DEFINE_PER_CPU(u32, smca_misc_banks_map);
@@ -381,6 +386,10 @@ static void threshold_restart_bank(void *_tr)
 	struct thresh_restart *tr = _tr;
 	u32 hi, lo;
 
+	/* sysfs write might race against an offline operation */
+	if (this_cpu_read(threshold_banks))
+		return;
+
 	rdmsr(tr->b->address, lo, hi);
 
 	if (tr->b->threshold_limit < (hi & THRESHOLD_MAX))
@@ -568,14 +577,19 @@ bool amd_filter_mce(struct mce *m)
 {
 	enum smca_bank_types bank_type = smca_get_bank_type(m->bank);
 	struct cpuinfo_x86 *c = &boot_cpu_data;
-	u8 xec = (m->status >> 16) & 0x3F;
 
 	/* See Family 17h Models 10h-2Fh Erratum #1114. */
 	if (c->x86 == 0x17 &&
 	    c->x86_model >= 0x10 && c->x86_model <= 0x2F &&
-	    bank_type == SMCA_IF && xec == 10)
+	    bank_type == SMCA_IF && XEC(m->status, 0x3f) == 10)
 		return true;
 
+	/* NB GART TLB error reporting is disabled by default. */
+	if (c->x86 < 0x17) {
+		if (m->bank == 4 && XEC(m->status, 0x1f) == 0x5)
+			return true;
+	}
+
 	return false;
 }
 
@@ -1016,13 +1030,22 @@ static void log_and_reset_block(struct threshold_block *block)
 static void amd_threshold_interrupt(void)
 {
 	struct threshold_block *first_block = NULL, *block = NULL, *tmp = NULL;
+	struct threshold_bank **bp = this_cpu_read(threshold_banks);
 	unsigned int bank, cpu = smp_processor_id();
 
+	/*
+	 * Validate that the threshold bank has been initialized already. The
+	 * handler is installed at boot time, but on a hotplug event the
+	 * interrupt might fire before the data has been initialized.
+	 */
+	if (!bp)
+		return;
+
 	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank) {
 		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
 			continue;
 
-		first_block = per_cpu(threshold_banks, cpu)[bank]->blocks;
+		first_block = bp[bank]->blocks;
 		if (!first_block)
 			continue;
 
@@ -1071,7 +1094,8 @@ store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size)
 	memset(&tr, 0, sizeof(tr));
 	tr.b		= b;
 
-	smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
+	if (smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1))
+		return -ENODEV;
 
 	return size;
 }
@@ -1095,7 +1119,8 @@ store_threshold_limit(struct threshold_block *b, const char *buf, size_t size)
 	b->threshold_limit = new;
 	tr.b = b;
 
-	smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
+	if (smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1))
+		return -ENODEV;
 
 	return size;
 }
@@ -1104,7 +1129,9 @@ static ssize_t show_error_count(struct threshold_block *b, char *buf)
 {
 	u32 lo, hi;
 
-	rdmsr_on_cpu(b->cpu, b->address, &lo, &hi);
+	/* CPU might be offline by now */
+	if (rdmsr_on_cpu(b->cpu, b->address, &lo, &hi))
+		return -ENODEV;
 
 	return sprintf(buf, "%u\n", ((hi & THRESHOLD_MAX) -
 				     (THRESHOLD_MAX - b->threshold_limit)));
@@ -1209,10 +1236,10 @@ static int allocate_threshold_blocks(unsigned int cpu, struct threshold_bank *tb
 	u32 low, high;
 	int err;
 
-	if ((bank >= per_cpu(mce_num_banks, cpu)) || (block >= NR_BLOCKS))
+	if ((bank >= this_cpu_read(mce_num_banks)) || (block >= NR_BLOCKS))
 		return 0;
 
-	if (rdmsr_safe_on_cpu(cpu, address, &low, &high))
+	if (rdmsr_safe(address, &low, &high))
 		return 0;
 
 	if (!(high & MASK_VALID_HI)) {
@@ -1247,6 +1274,7 @@ static int allocate_threshold_blocks(unsigned int cpu, struct threshold_bank *tb
 
 	INIT_LIST_HEAD(&b->miscj);
 
+	/* This is safe as @tb is not visible yet */
 	if (tb->blocks)
 		list_add(&b->miscj, &tb->blocks->miscj);
 	else
@@ -1267,13 +1295,12 @@ static int allocate_threshold_blocks(unsigned int cpu, struct threshold_bank *tb
 	if (b)
 		kobject_uevent(&b->kobj, KOBJ_ADD);
 
-	return err;
+	return 0;
 
 out_free:
 	if (b) {
-		kobject_put(&b->kobj);
 		list_del(&b->miscj);
-		kfree(b);
+		kobject_put(&b->kobj);
 	}
 	return err;
 }
@@ -1302,9 +1329,10 @@ static int __threshold_add_blocks(struct threshold_bank *b)
 	return err;
 }
 
-static int threshold_create_bank(unsigned int cpu, unsigned int bank)
+static int threshold_create_bank(struct threshold_bank **bp, unsigned int cpu,
+				 unsigned int bank)
 {
-	struct device *dev = per_cpu(mce_device, cpu);
+	struct device *dev = this_cpu_read(mce_device);
 	struct amd_northbridge *nb = NULL;
 	struct threshold_bank *b = NULL;
 	const char *name = get_name(bank, NULL);
@@ -1324,7 +1352,7 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
 			if (err)
 				goto out;
 
-			per_cpu(threshold_banks, cpu)[bank] = b;
+			bp[bank] = b;
 			refcount_inc(&b->cpus);
 
 			err = __threshold_add_blocks(b);
@@ -1339,6 +1367,7 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		goto out;
 	}
 
+	/* Associate the bank with the per-CPU MCE device */
 	b->kobj = kobject_create_and_add(name, &dev->kobj);
 	if (!b->kobj) {
 		err = -EINVAL;
@@ -1346,6 +1375,7 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	}
 
 	if (is_shared_bank(bank)) {
+		b->shared = 1;
 		refcount_set(&b->cpus, 1);
 
 		/* nb is already initialized, see above */
@@ -1357,16 +1387,16 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 	err = allocate_threshold_blocks(cpu, b, bank, 0, msr_ops.misc(bank));
 	if (err)
-		goto out_free;
-
-	per_cpu(threshold_banks, cpu)[bank] = b;
+		goto out_kobj;
 
+	bp[bank] = b;
 	return 0;
 
- out_free:
+out_kobj:
+	kobject_put(b->kobj);
+out_free:
 	kfree(b);
-
- out:
+out:
 	return err;
 }
 
@@ -1375,21 +1405,16 @@ static void threshold_block_release(struct kobject *kobj)
 	kfree(to_block(kobj));
 }
 
-static void deallocate_threshold_block(unsigned int cpu, unsigned int bank)
+static void deallocate_threshold_blocks(struct threshold_bank *bank)
 {
-	struct threshold_block *pos = NULL;
-	struct threshold_block *tmp = NULL;
-	struct threshold_bank *head = per_cpu(threshold_banks, cpu)[bank];
+	struct threshold_block *pos, *tmp;
 
-	if (!head)
-		return;
-
-	list_for_each_entry_safe(pos, tmp, &head->blocks->miscj, miscj) {
+	list_for_each_entry_safe(pos, tmp, &bank->blocks->miscj, miscj) {
 		list_del(&pos->miscj);
 		kobject_put(&pos->kobj);
 	}
 
-	kobject_put(&head->blocks->kobj);
+	kobject_put(&bank->blocks->kobj);
 }
 
 static void __threshold_remove_blocks(struct threshold_bank *b)
@@ -1403,122 +1428,102 @@ static void __threshold_remove_blocks(struct threshold_bank *b)
 		kobject_del(&pos->kobj);
 }
 
-static void threshold_remove_bank(unsigned int cpu, int bank)
+static void threshold_remove_bank(struct threshold_bank *bank)
 {
 	struct amd_northbridge *nb;
-	struct threshold_bank *b;
 
-	b = per_cpu(threshold_banks, cpu)[bank];
-	if (!b)
-		return;
+	if (!bank->blocks)
+		goto out_free;
 
-	if (!b->blocks)
-		goto free_out;
+	if (!bank->shared)
+		goto out_dealloc;
 
-	if (is_shared_bank(bank)) {
-		if (!refcount_dec_and_test(&b->cpus)) {
-			__threshold_remove_blocks(b);
-			per_cpu(threshold_banks, cpu)[bank] = NULL;
-			return;
-		} else {
-			/*
-			 * the last CPU on this node using the shared bank is
-			 * going away, remove that bank now.
-			 */
-			nb = node_to_amd_nb(amd_get_nb_id(cpu));
-			nb->bank4 = NULL;
-		}
+	if (!refcount_dec_and_test(&bank->cpus)) {
+		__threshold_remove_blocks(bank);
+		return;
+	} else {
+		/*
+		 * The last CPU on this node using the shared bank is going
+		 * away, remove that bank now.
+		 */
+		nb = node_to_amd_nb(amd_get_nb_id(smp_processor_id()));
+		nb->bank4 = NULL;
 	}
 
-	deallocate_threshold_block(cpu, bank);
+out_dealloc:
+	deallocate_threshold_blocks(bank);
 
-free_out:
-	kobject_del(b->kobj);
-	kobject_put(b->kobj);
-	kfree(b);
-	per_cpu(threshold_banks, cpu)[bank] = NULL;
+out_free:
+	kobject_put(bank->kobj);
+	kfree(bank);
 }
 
 int mce_threshold_remove_device(unsigned int cpu)
 {
-	unsigned int bank;
+	struct threshold_bank **bp = this_cpu_read(threshold_banks);
+	unsigned int bank, numbanks = this_cpu_read(mce_num_banks);
 
-	for (bank = 0; bank < per_cpu(mce_num_banks, cpu); ++bank) {
-		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
-			continue;
-		threshold_remove_bank(cpu, bank);
+	if (!bp)
+		return 0;
+
+	/*
+	 * Clear the pointer before cleaning up, so that the interrupt won't
+	 * touch anything of this.
+	 */
+	this_cpu_write(threshold_banks, NULL);
+
+	for (bank = 0; bank < numbanks; bank++) {
+		if (bp[bank]) {
+			threshold_remove_bank(bp[bank]);
+			bp[bank] = NULL;
+		}
 	}
-	kfree(per_cpu(threshold_banks, cpu));
-	per_cpu(threshold_banks, cpu) = NULL;
+	kfree(bp);
 	return 0;
 }
 
-/* create dir/files for all valid threshold banks */
+/**
+ * mce_threshold_create_device - Create the per-CPU MCE threshold device
+ * @cpu:	The plugged in CPU
+ *
+ * Create directories and files for all valid threshold banks.
+ *
+ * This is invoked from the CPU hotplug callback which was installed in
+ * mcheck_init_device(). The invocation happens in context of the hotplug
+ * thread running on @cpu.  The callback is invoked on all CPUs which are
+ * online when the callback is installed or during a real hotplug event.
+ */
 int mce_threshold_create_device(unsigned int cpu)
 {
-	unsigned int bank;
+	unsigned int numbanks, bank;
 	struct threshold_bank **bp;
-	int err = 0;
+	int err;
 
-	bp = per_cpu(threshold_banks, cpu);
+	if (!mce_flags.amd_threshold)
+		return 0;
+
+	bp = this_cpu_read(threshold_banks);
 	if (bp)
 		return 0;
 
-	bp = kcalloc(per_cpu(mce_num_banks, cpu), sizeof(struct threshold_bank *),
-		     GFP_KERNEL);
+	numbanks = this_cpu_read(mce_num_banks);
+	bp = kcalloc(numbanks, sizeof(*bp), GFP_KERNEL);
 	if (!bp)
 		return -ENOMEM;
 
-	per_cpu(threshold_banks, cpu) = bp;
-
-	for (bank = 0; bank < per_cpu(mce_num_banks, cpu); ++bank) {
-		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
+	for (bank = 0; bank < numbanks; ++bank) {
+		if (!(this_cpu_read(bank_map) & (1 << bank)))
 			continue;
-		err = threshold_create_bank(cpu, bank);
+		err = threshold_create_bank(bp, cpu, bank);
 		if (err)
-			goto err;
-	}
-	return err;
-err:
-	mce_threshold_remove_device(cpu);
-	return err;
-}
-
-static __init int threshold_init_device(void)
-{
-	unsigned lcpu = 0;
-
-	/* to hit CPUs online before the notifier is up */
-	for_each_online_cpu(lcpu) {
-		int err = mce_threshold_create_device(lcpu);
-
-		if (err)
-			return err;
+			goto out_err;
 	}
+	this_cpu_write(threshold_banks, bp);
 
 	if (thresholding_irq_en)
 		mce_threshold_vector = amd_threshold_interrupt;
-
 	return 0;
+out_err:
+	mce_threshold_remove_device(cpu);
+	return err;
 }
-/*
- * there are 3 funcs which need to be _initcalled in a logic sequence:
- * 1. xen_late_init_mcelog
- * 2. mcheck_init_device
- * 3. threshold_init_device
- *
- * xen_late_init_mcelog must register xen_mce_chrdev_device before
- * native mce_chrdev_device registration if running under xen platform;
- *
- * mcheck_init_device should be inited before threshold_init_device to
- * initialize mce_device, otherwise a NULL ptr dereference will cause panic.
- *
- * so we use following _initcalls
- * 1. device_initcall(xen_late_init_mcelog);
- * 2. device_initcall_sync(mcheck_init_device);
- * 3. late_initcall(threshold_init_device);
- *
- * when running under xen, the initcall order is 1,2,3;
- * on baremetal, we skip 1 and we do only 2 and 3.
- */
-late_initcall(threshold_init_device);
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 54165f3569e8..02e1f165f148 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -158,29 +158,17 @@ void mce_log(struct mce *m)
 }
 EXPORT_SYMBOL_GPL(mce_log);
 
-/*
- * We run the default notifier if we have only the UC, the first and the
- * default notifier registered. I.e., the mandatory NUM_DEFAULT_NOTIFIERS
- * notifiers registered on the chain.
- */
-#define NUM_DEFAULT_NOTIFIERS	3
-static atomic_t num_notifiers;
-
 void mce_register_decode_chain(struct notifier_block *nb)
 {
 	if (WARN_ON(nb->priority > MCE_PRIO_MCELOG && nb->priority < MCE_PRIO_EDAC))
 		return;
 
-	atomic_inc(&num_notifiers);
-
 	blocking_notifier_chain_register(&x86_mce_decoder_chain, nb);
 }
 EXPORT_SYMBOL_GPL(mce_register_decode_chain);
 
 void mce_unregister_decode_chain(struct notifier_block *nb)
 {
-	atomic_dec(&num_notifiers);
-
 	blocking_notifier_chain_unregister(&x86_mce_decoder_chain, nb);
 }
 EXPORT_SYMBOL_GPL(mce_unregister_decode_chain);
@@ -263,6 +251,7 @@ static void __print_mce(struct mce *m)
 	}
 
 	pr_cont("\n");
+
 	/*
 	 * Note this output is parsed by external tools and old fields
 	 * should not be changed.
@@ -544,22 +533,7 @@ bool mce_is_correctable(struct mce *m)
 }
 EXPORT_SYMBOL_GPL(mce_is_correctable);
 
-static bool cec_add_mce(struct mce *m)
-{
-	if (!m)
-		return false;
-
-	/* We eat only correctable DRAM errors with usable addresses. */
-	if (mce_is_memory_error(m) &&
-	    mce_is_correctable(m)  &&
-	    mce_usable_address(m))
-		if (!cec_add_elem(m->addr >> PAGE_SHIFT))
-			return true;
-
-	return false;
-}
-
-static int mce_first_notifier(struct notifier_block *nb, unsigned long val,
+static int mce_early_notifier(struct notifier_block *nb, unsigned long val,
 			      void *data)
 {
 	struct mce *m = (struct mce *)data;
@@ -567,9 +541,6 @@ static int mce_first_notifier(struct notifier_block *nb, unsigned long val,
 	if (!m)
 		return NOTIFY_DONE;
 
-	if (cec_add_mce(m))
-		return NOTIFY_STOP;
-
 	/* Emit the trace record: */
 	trace_mce_record(m);
 
@@ -580,9 +551,9 @@ static int mce_first_notifier(struct notifier_block *nb, unsigned long val,
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block first_nb = {
-	.notifier_call	= mce_first_notifier,
-	.priority	= MCE_PRIO_FIRST,
+static struct notifier_block early_nb = {
+	.notifier_call	= mce_early_notifier,
+	.priority	= MCE_PRIO_EARLY,
 };
 
 static int uc_decode_notifier(struct notifier_block *nb, unsigned long val,
@@ -599,8 +570,10 @@ static int uc_decode_notifier(struct notifier_block *nb, unsigned long val,
 		return NOTIFY_DONE;
 
 	pfn = mce->addr >> PAGE_SHIFT;
-	if (!memory_failure(pfn, 0))
+	if (!memory_failure(pfn, 0)) {
 		set_mce_nospec(pfn);
+		mce->kflags |= MCE_HANDLED_UC;
+	}
 
 	return NOTIFY_OK;
 }
@@ -618,10 +591,8 @@ static int mce_default_notifier(struct notifier_block *nb, unsigned long val,
 	if (!m)
 		return NOTIFY_DONE;
 
-	if (atomic_read(&num_notifiers) > NUM_DEFAULT_NOTIFIERS)
-		return NOTIFY_DONE;
-
-	__print_mce(m);
+	if (mca_cfg.print_all || !m->kflags)
+		__print_mce(m);
 
 	return NOTIFY_DONE;
 }
@@ -1360,8 +1331,19 @@ void notrace do_machine_check(struct pt_regs *regs, long error_code)
 		local_irq_disable();
 		ist_end_non_atomic();
 	} else {
-		if (!fixup_exception(regs, X86_TRAP_MC, error_code, 0))
-			mce_panic("Failed kernel mode recovery", &m, msg);
+		/*
+		 * Handle an MCE which has happened in kernel space but from
+		 * which the kernel can recover: ex_has_fault_handler() has
+		 * already verified that the rIP at which the error happened is
+		 * a rIP from which the kernel can recover (by jumping to
+		 * recovery code specified in _ASM_EXTABLE_FAULT()) and the
+		 * corresponding exception handler which would do that is the
+		 * proper one.
+		 */
+		if (m.kflags & MCE_IN_KERNEL_RECOV) {
+			if (!fixup_exception(regs, X86_TRAP_MC, error_code, 0))
+				mce_panic("Failed kernel mode recovery", &m, msg);
+		}
 	}
 
 out_ist:
@@ -1756,6 +1738,7 @@ static void __mcheck_cpu_init_early(struct cpuinfo_x86 *c)
 		mce_flags.overflow_recov = !!cpu_has(c, X86_FEATURE_OVERFLOW_RECOV);
 		mce_flags.succor	 = !!cpu_has(c, X86_FEATURE_SUCCOR);
 		mce_flags.smca		 = !!cpu_has(c, X86_FEATURE_SMCA);
+		mce_flags.amd_threshold	 = 1;
 
 		if (mce_flags.smca) {
 			msr_ops.ctl	= smca_ctl_reg;
@@ -1990,6 +1973,7 @@ void mce_disable_bank(int bank)
  * mce=no_cmci Disables CMCI
  * mce=no_lmce Disables LMCE
  * mce=dont_log_ce Clears corrected events silently, no log created for CEs.
+ * mce=print_all Print all machine check logs to console
  * mce=ignore_ce Disables polling and CMCI, corrected events are not cleared.
  * mce=TOLERANCELEVEL[,monarchtimeout] (number, see above)
  *	monarchtimeout is how long to wait for other CPUs on machine
@@ -2018,6 +2002,8 @@ static int __init mcheck_enable(char *str)
 		cfg->lmce_disabled = 1;
 	else if (!strcmp(str, "dont_log_ce"))
 		cfg->dont_log_ce = true;
+	else if (!strcmp(str, "print_all"))
+		cfg->print_all = true;
 	else if (!strcmp(str, "ignore_ce"))
 		cfg->ignore_ce = true;
 	else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog"))
@@ -2040,7 +2026,7 @@ __setup("mce", mcheck_enable);
 int __init mcheck_init(void)
 {
 	mcheck_intel_therm_init();
-	mce_register_decode_chain(&first_nb);
+	mce_register_decode_chain(&early_nb);
 	mce_register_decode_chain(&mce_uc_nb);
 	mce_register_decode_chain(&mce_default_nb);
 	mcheck_vendor_init_severity();
@@ -2284,6 +2270,7 @@ static ssize_t store_int_with_restart(struct device *s,
 static DEVICE_INT_ATTR(tolerant, 0644, mca_cfg.tolerant);
 static DEVICE_INT_ATTR(monarch_timeout, 0644, mca_cfg.monarch_timeout);
 static DEVICE_BOOL_ATTR(dont_log_ce, 0644, mca_cfg.dont_log_ce);
+static DEVICE_BOOL_ATTR(print_all, 0644, mca_cfg.print_all);
 
 static struct dev_ext_attribute dev_attr_check_interval = {
 	__ATTR(check_interval, 0644, device_show_int, store_int_with_restart),
@@ -2308,6 +2295,7 @@ static struct device_attribute *mce_device_attrs[] = {
 #endif
 	&dev_attr_monarch_timeout.attr,
 	&dev_attr_dont_log_ce.attr,
+	&dev_attr_print_all.attr,
 	&dev_attr_ignore_ce.attr,
 	&dev_attr_cmci_disabled.attr,
 	NULL
@@ -2480,6 +2468,13 @@ static __init void mce_init_banks(void)
 	}
 }
 
+/*
+ * When running on XEN, this initcall is ordered against the XEN mcelog
+ * initcall:
+ *
+ *   device_initcall(xen_late_init_mcelog);
+ *   device_initcall_sync(mcheck_init_device);
+ */
 static __init int mcheck_init_device(void)
 {
 	int err;
@@ -2511,6 +2506,10 @@ static __init int mcheck_init_device(void)
 	if (err)
 		goto err_out_mem;
 
+	/*
+	 * Invokes mce_cpu_online() on all CPUs which are online when
+	 * the state is installed.
+	 */
 	err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/mce:online",
 				mce_cpu_online, mce_cpu_pre_down);
 	if (err < 0)
@@ -2600,7 +2599,6 @@ static int __init mcheck_late_init(void)
 		static_branch_inc(&mcsafe_key);
 
 	mcheck_debugfs_init();
-	cec_init();
 
 	/*
 	 * Flush out everything that has been logged during early boot, now that
diff --git a/arch/x86/kernel/cpu/mce/dev-mcelog.c b/arch/x86/kernel/cpu/mce/dev-mcelog.c
index d089567a9ce8..c033e7ea9e3c 100644
--- a/arch/x86/kernel/cpu/mce/dev-mcelog.c
+++ b/arch/x86/kernel/cpu/mce/dev-mcelog.c
@@ -39,6 +39,9 @@ static int dev_mce_log(struct notifier_block *nb, unsigned long val,
 	struct mce *mce = (struct mce *)data;
 	unsigned int entry;
 
+	if (mce->kflags & MCE_HANDLED_CEC)
+		return NOTIFY_DONE;
+
 	mutex_lock(&mce_chrdev_read_mutex);
 
 	entry = mcelog->next;
@@ -56,6 +59,7 @@ static int dev_mce_log(struct notifier_block *nb, unsigned long val,
 
 	memcpy(mcelog->entry + entry, mce, sizeof(struct mce));
 	mcelog->entry[entry].finished = 1;
+	mcelog->entry[entry].kflags = 0;
 
 	/* wake processes polling /dev/mcelog */
 	wake_up_interruptible(&mce_chrdev_wait);
@@ -63,6 +67,7 @@ static int dev_mce_log(struct notifier_block *nb, unsigned long val,
 unlock:
 	mutex_unlock(&mce_chrdev_read_mutex);
 
+	mce->kflags |= MCE_HANDLED_MCELOG;
 	return NOTIFY_OK;
 }
 
diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h
index 3b008172ad73..55f5c7b755f2 100644
--- a/arch/x86/kernel/cpu/mce/internal.h
+++ b/arch/x86/kernel/cpu/mce/internal.h
@@ -119,6 +119,7 @@ struct mca_config {
 	bool dont_log_ce;
 	bool cmci_disabled;
 	bool ignore_ce;
+	bool print_all;
 
 	__u64 lmce_disabled		: 1,
 	      disabled			: 1,
@@ -148,7 +149,7 @@ struct mce_vendor_flags {
 	 * Recovery. It indicates support for data poisoning in HW and deferred
 	 * error interrupts.
 	 */
-	      succor		: 1,
+	succor			: 1,
 
 	/*
 	 * (AMD) SMCA: This bit indicates support for Scalable MCA which expands
@@ -156,9 +157,12 @@ struct mce_vendor_flags {
 	 * banks. Also, to accommodate the new banks and registers, the MCA
 	 * register space is moved to a new MSR range.
 	 */
-	      smca		: 1,
+	smca			: 1,
 
-	      __reserved_0	: 61;
+	/* AMD-style error thresholding banks present. */
+	amd_threshold		: 1,
+
+	__reserved_0		: 60;
 };
 
 extern struct mce_vendor_flags mce_flags;
diff --git a/arch/x86/kernel/cpu/mce/severity.c b/arch/x86/kernel/cpu/mce/severity.c
index 87bcdc6dc2f0..e1da619add19 100644
--- a/arch/x86/kernel/cpu/mce/severity.c
+++ b/arch/x86/kernel/cpu/mce/severity.c
@@ -213,8 +213,12 @@ static int error_context(struct mce *m)
 {
 	if ((m->cs & 3) == 3)
 		return IN_USER;
-	if (mc_recoverable(m->mcgstatus) && ex_has_fault_handler(m->ip))
+
+	if (mc_recoverable(m->mcgstatus) && ex_has_fault_handler(m->ip)) {
+		m->kflags |= MCE_IN_KERNEL_RECOV;
 		return IN_KERNEL_RECOV;
+	}
+
 	return IN_KERNEL;
 }
 
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 7019d4b2df0c..baec68b7e010 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -545,8 +545,7 @@ static int __wait_for_cpus(atomic_t *t, long long timeout)
 /*
  * Returns:
  * < 0 - on error
- *   0 - no update done
- *   1 - microcode was updated
+ *   0 - success (no update done or microcode was updated)
  */
 static int __reload_late(void *info)
 {
@@ -573,11 +572,11 @@ static int __reload_late(void *info)
 	else
 		goto wait_for_siblings;
 
-	if (err > UCODE_NFOUND) {
-		pr_warn("Error reloading microcode on CPU %d\n", cpu);
+	if (err >= UCODE_NFOUND) {
+		if (err == UCODE_ERROR)
+			pr_warn("Error reloading microcode on CPU %d\n", cpu);
+
 		ret = -1;
-	} else if (err == UCODE_UPDATED || err == UCODE_OK) {
-		ret = 1;
 	}
 
 wait_for_siblings:
@@ -608,7 +607,7 @@ static int microcode_reload_late(void)
 	atomic_set(&late_cpus_out, 0);
 
 	ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
-	if (ret > 0)
+	if (ret == 0)
 		microcode_check();
 
 	pr_info("Reload completed, microcode revision: 0x%x\n", boot_cpu_data.microcode);
@@ -649,7 +648,7 @@ static ssize_t reload_store(struct device *dev,
 put:
 	put_online_cpus();
 
-	if (ret >= 0)
+	if (ret == 0)
 		ret = size;
 
 	return ret;
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 51b9190c628b..23ad8e953dfb 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -761,7 +761,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 
 	/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
 	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
-	__flush_tlb();
+	flush_tlb_local();
 
 	/* Save MTRR state */
 	rdmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
@@ -778,7 +778,7 @@ static void post_set(void) __releases(set_atomicity_lock)
 {
 	/* Flush TLBs (no need to flush caches - they are disabled) */
 	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
-	__flush_tlb();
+	flush_tlb_local();
 
 	/* Intel (P6) standard MTRRs */
 	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index ae64ec7f752f..456511b2284e 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -65,7 +65,7 @@ bool in_entry_stack(unsigned long *stack, struct stack_info *info)
 }
 
 static void printk_stack_address(unsigned long address, int reliable,
-				 char *log_lvl)
+				 const char *log_lvl)
 {
 	touch_nmi_watchdog();
 	printk("%s %s%pB\n", log_lvl, reliable ? "" : "? ", (void *)address);
@@ -160,7 +160,7 @@ static void show_regs_if_on_stack(struct stack_info *info, struct pt_regs *regs,
 }
 
 void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-			unsigned long *stack, char *log_lvl)
+			unsigned long *stack, const char *log_lvl)
 {
 	struct unwind_state state;
 	struct stack_info stack_info = {0};
@@ -279,7 +279,8 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
 	}
 }
 
-void show_stack(struct task_struct *task, unsigned long *sp)
+void show_stack(struct task_struct *task, unsigned long *sp,
+		       const char *loglvl)
 {
 	task = task ? : current;
 
@@ -290,7 +291,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 	if (!sp && task == current)
 		sp = get_stack_pointer(current, NULL);
 
-	show_trace_log_lvl(task, NULL, sp, KERN_DEFAULT);
+	show_trace_log_lvl(task, NULL, sp, loglvl);
 }
 
 void show_stack_regs(struct pt_regs *regs)
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index 8e3a8fedfa4d..722fd712e1cf 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -87,7 +87,6 @@ static bool in_softirq_stack(unsigned long *stack, struct stack_info *info)
 
 static bool in_doublefault_stack(unsigned long *stack, struct stack_info *info)
 {
-#ifdef CONFIG_DOUBLEFAULT
 	struct cpu_entry_area *cea = get_cpu_entry_area(raw_smp_processor_id());
 	struct doublefault_stack *ss = &cea->doublefault_stack;
 
@@ -103,9 +102,6 @@ static bool in_doublefault_stack(unsigned long *stack, struct stack_info *info)
 	info->next_sp	= (unsigned long *)this_cpu_read(cpu_tss_rw.x86_tss.sp);
 
 	return true;
-#else
-	return false;
-#endif
 }
 
 
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 87b97897a881..460ae7f66818 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -183,7 +183,8 @@ int get_stack_info(unsigned long *stack, struct task_struct *task,
 	 */
 	if (visit_mask) {
 		if (*visit_mask & (1UL << info->type)) {
-			printk_deferred_once(KERN_WARNING "WARNING: stack recursion on stack type %d\n", info->type);
+			if (task == current)
+				printk_deferred_once(KERN_WARNING "WARNING: stack recursion on stack type %d\n", info->type);
 			goto unknown;
 		}
 		*visit_mask |= 1UL << info->type;
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index c5399e80c59c..983cd53ed4c9 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -910,14 +910,6 @@ static int __init parse_memmap_one(char *p)
 		return -EINVAL;
 
 	if (!strncmp(p, "exactmap", 8)) {
-#ifdef CONFIG_CRASH_DUMP
-		/*
-		 * If we are doing a crash dump, we still need to know
-		 * the real memory size before the original memory map is
-		 * reset.
-		 */
-		saved_max_pfn = e820__end_of_ram_pfn();
-#endif
 		e820_table->nr_entries = 0;
 		userdef = 1;
 		return 0;
@@ -999,7 +991,15 @@ void __init e820__reserve_setup_data(void)
 	while (pa_data) {
 		data = early_memremap(pa_data, sizeof(*data));
 		e820__range_update(pa_data, sizeof(*data)+data->len, E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
-		e820__range_update_kexec(pa_data, sizeof(*data)+data->len, E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
+
+		/*
+		 * SETUP_EFI is supplied by kexec and does not need to be
+		 * reserved.
+		 */
+		if (data->type != SETUP_EFI)
+			e820__range_update_kexec(pa_data,
+						 sizeof(*data) + data->len,
+						 E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
 
 		if (data->type == SETUP_INDIRECT &&
 		    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) {
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 9b33904251a9..93fbdff2974f 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -15,12 +15,9 @@
 #include <xen/hvc-console.h>
 #include <asm/pci-direct.h>
 #include <asm/fixmap.h>
-#include <asm/intel-mid.h>
 #include <asm/pgtable.h>
 #include <linux/usb/ehci_def.h>
 #include <linux/usb/xhci-dbgp.h>
-#include <linux/efi.h>
-#include <asm/efi.h>
 #include <asm/pci_x86.h>
 
 /* Simple VGA output */
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 37a0aeaf89e7..867c126ddabe 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -282,7 +282,8 @@ static inline void tramp_free(void *tramp) { }
 
 /* Defined as markers to the end of the ftrace default trampolines */
 extern void ftrace_regs_caller_end(void);
-extern void ftrace_epilogue(void);
+extern void ftrace_regs_caller_ret(void);
+extern void ftrace_caller_end(void);
 extern void ftrace_caller_op_ptr(void);
 extern void ftrace_regs_caller_op_ptr(void);
 
@@ -334,7 +335,7 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 		call_offset = (unsigned long)ftrace_regs_call;
 	} else {
 		start_offset = (unsigned long)ftrace_caller;
-		end_offset = (unsigned long)ftrace_epilogue;
+		end_offset = (unsigned long)ftrace_caller_end;
 		op_offset = (unsigned long)ftrace_caller_op_ptr;
 		call_offset = (unsigned long)ftrace_call;
 	}
@@ -366,6 +367,13 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 	if (WARN_ON(ret < 0))
 		goto fail;
 
+	if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
+		ip = trampoline + (ftrace_regs_caller_ret - ftrace_regs_caller);
+		ret = probe_kernel_read(ip, (void *)retq, RET_SIZE);
+		if (WARN_ON(ret < 0))
+			goto fail;
+	}
+
 	/*
 	 * The address of the ftrace_ops that is used for this trampoline
 	 * is stored at the end of the trampoline. This will be used to
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index 369e61faacfe..9738ed23964e 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -23,7 +23,7 @@
 #endif /* CONFIG_FRAME_POINTER */
 
 /* Size of stack used to save mcount regs in save_mcount_regs */
-#define MCOUNT_REG_SIZE		(SS+8 + MCOUNT_FRAME_SIZE)
+#define MCOUNT_REG_SIZE		(FRAME_SIZE + MCOUNT_FRAME_SIZE)
 
 /*
  * gcc -pg option adds a call to 'mcount' in most functions.
@@ -77,7 +77,7 @@
 	/*
 	 * We add enough stack to save all regs.
 	 */
-	subq $(MCOUNT_REG_SIZE - MCOUNT_FRAME_SIZE), %rsp
+	subq $(FRAME_SIZE), %rsp
 	movq %rax, RAX(%rsp)
 	movq %rcx, RCX(%rsp)
 	movq %rdx, RDX(%rsp)
@@ -157,8 +157,12 @@ SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
 	 * think twice before adding any new code or changing the
 	 * layout here.
 	 */
-SYM_INNER_LABEL(ftrace_epilogue, SYM_L_GLOBAL)
+SYM_INNER_LABEL(ftrace_caller_end, SYM_L_GLOBAL)
 
+	jmp ftrace_epilogue
+SYM_FUNC_END(ftrace_caller);
+
+SYM_FUNC_START(ftrace_epilogue)
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
 	jmp ftrace_stub
@@ -170,14 +174,12 @@ SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
  */
 SYM_INNER_LABEL_ALIGN(ftrace_stub, SYM_L_WEAK)
 	retq
-SYM_FUNC_END(ftrace_caller)
+SYM_FUNC_END(ftrace_epilogue)
 
 SYM_FUNC_START(ftrace_regs_caller)
 	/* Save the current flags before any operations that can change them */
 	pushfq
 
-	UNWIND_HINT_SAVE
-
 	/* added 8 bytes to save flags */
 	save_mcount_regs 8
 	/* save_mcount_regs fills in first two parameters */
@@ -233,10 +235,13 @@ SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	movq ORIG_RAX(%rsp), %rax
 	movq %rax, MCOUNT_REG_SIZE-8(%rsp)
 
-	/* If ORIG_RAX is anything but zero, make this a call to that */
+	/*
+	 * If ORIG_RAX is anything but zero, make this a call to that.
+	 * See arch_ftrace_set_direct_caller().
+	 */
 	movq ORIG_RAX(%rsp), %rax
-	cmpq	$0, %rax
-	je	1f
+	testq	%rax, %rax
+	jz	1f
 
 	/* Swap the flags with orig_rax */
 	movq MCOUNT_REG_SIZE(%rsp), %rdi
@@ -244,20 +249,14 @@ SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	movq %rax, MCOUNT_REG_SIZE(%rsp)
 
 	restore_mcount_regs 8
+	/* Restore flags */
+	popfq
 
-	jmp	2f
+SYM_INNER_LABEL(ftrace_regs_caller_ret, SYM_L_GLOBAL);
+	UNWIND_HINT_RET_OFFSET
+	jmp	ftrace_epilogue
 
 1:	restore_mcount_regs
-
-
-2:
-	/*
-	 * The stack layout is nondetermistic here, depending on which path was
-	 * taken.  This confuses objtool and ORC, rightfully so.  For now,
-	 * pretend the stack always looks like the non-direct case.
-	 */
-	UNWIND_HINT_RESTORE
-
 	/* Restore flags */
 	popfq
 
@@ -268,7 +267,6 @@ SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	 * to the return.
 	 */
 SYM_INNER_LABEL(ftrace_regs_caller_end, SYM_L_GLOBAL)
-
 	jmp ftrace_epilogue
 
 SYM_FUNC_END(ftrace_regs_caller)
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 12df3a4abfdd..6b32ab009c19 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -43,7 +43,7 @@ static int map_irq_stack(unsigned int cpu)
 		pages[i] = pfn_to_page(pa >> PAGE_SHIFT);
 	}
 
-	va = vmap(pages, IRQ_STACK_SIZE / PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL);
+	va = vmap(pages, IRQ_STACK_SIZE / PAGE_SIZE, VM_MAP, PAGE_KERNEL);
 	if (!va)
 		return -ENOMEM;
 
diff --git a/arch/x86/kernel/itmt.c b/arch/x86/kernel/itmt.c
index 1cb3ca9bba49..1afbdd1dd777 100644
--- a/arch/x86/kernel/itmt.c
+++ b/arch/x86/kernel/itmt.c
@@ -39,8 +39,7 @@ static bool __read_mostly sched_itmt_capable;
 unsigned int __read_mostly sysctl_sched_itmt_enabled;
 
 static int sched_itmt_update_handler(struct ctl_table *table, int write,
-				     void __user *buffer, size_t *lenp,
-				     loff_t *ppos)
+				     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	unsigned int old_sysctl;
 	int ret;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index c131ba4e70ef..5638e4ae2ea6 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -160,25 +160,6 @@ unsigned paravirt_patch_insns(void *insn_buff, unsigned len,
 	return insn_len;
 }
 
-static void native_flush_tlb(void)
-{
-	__native_flush_tlb();
-}
-
-/*
- * Global pages have to be flushed a bit differently. Not a real
- * performance problem because this does not happen often.
- */
-static void native_flush_tlb_global(void)
-{
-	__native_flush_tlb_global();
-}
-
-static void native_flush_tlb_one_user(unsigned long addr)
-{
-	__native_flush_tlb_one_user(addr);
-}
-
 struct static_key paravirt_steal_enabled;
 struct static_key paravirt_steal_rq_enabled;
 
@@ -359,7 +340,7 @@ struct paravirt_patch_template pv_ops = {
 #endif /* CONFIG_PARAVIRT_XXL */
 
 	/* Mmu ops. */
-	.mmu.flush_tlb_user	= native_flush_tlb,
+	.mmu.flush_tlb_user	= native_flush_tlb_local,
 	.mmu.flush_tlb_kernel	= native_flush_tlb_global,
 	.mmu.flush_tlb_one_user	= native_flush_tlb_one_user,
 	.mmu.flush_tlb_others	= native_flush_tlb_others,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 9da70b279dad..f2eab49d044e 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -612,6 +612,17 @@ void speculation_ctrl_update_current(void)
 	preempt_enable();
 }
 
+static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
+{
+	unsigned long newval, cr4 = this_cpu_read(cpu_tlbstate.cr4);
+
+	newval = cr4 ^ mask;
+	if (newval != cr4) {
+		this_cpu_write(cpu_tlbstate.cr4, newval);
+		__write_cr4(newval);
+	}
+}
+
 void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p)
 {
 	unsigned long tifp, tifn;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 4b3fa6cd3106..a3767e74c758 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -237,6 +237,9 @@ static u64 __init get_ramdisk_image(void)
 
 	ramdisk_image |= (u64)boot_params.ext_ramdisk_image << 32;
 
+	if (ramdisk_image == 0)
+		ramdisk_image = phys_initrd_start;
+
 	return ramdisk_image;
 }
 static u64 __init get_ramdisk_size(void)
@@ -245,6 +248,9 @@ static u64 __init get_ramdisk_size(void)
 
 	ramdisk_size |= (u64)boot_params.ext_ramdisk_size << 32;
 
+	if (ramdisk_size == 0)
+		ramdisk_size = phys_initrd_size;
+
 	return ramdisk_size;
 }
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 8c89e4d9ad28..c0643264cd05 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -266,6 +266,14 @@ static void notrace start_secondary(void *unused)
 
 	wmb();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+
+	/*
+	 * Prevent tail call to cpu_startup_entry() because the stack protector
+	 * guard has been changed a couple of function calls up, in
+	 * boot_init_stack_canary() and must not be checked before tail calling
+	 * another function.
+	 */
+	prevent_tail_call_optimization();
 }
 
 /**
@@ -1849,24 +1857,25 @@ static bool slv_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq)
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 
-#define ICPU(model) \
-	{X86_VENDOR_INTEL, 6, model, X86_FEATURE_APERFMPERF, 0}
+#define X86_MATCH(model)					\
+	X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6,		\
+		INTEL_FAM6_##model, X86_FEATURE_APERFMPERF, NULL)
 
 static const struct x86_cpu_id has_knl_turbo_ratio_limits[] = {
-	ICPU(INTEL_FAM6_XEON_PHI_KNL),
-	ICPU(INTEL_FAM6_XEON_PHI_KNM),
+	X86_MATCH(XEON_PHI_KNL),
+	X86_MATCH(XEON_PHI_KNM),
 	{}
 };
 
 static const struct x86_cpu_id has_skx_turbo_ratio_limits[] = {
-	ICPU(INTEL_FAM6_SKYLAKE_X),
+	X86_MATCH(SKYLAKE_X),
 	{}
 };
 
 static const struct x86_cpu_id has_glm_turbo_ratio_limits[] = {
-	ICPU(INTEL_FAM6_ATOM_GOLDMONT),
-	ICPU(INTEL_FAM6_ATOM_GOLDMONT_D),
-	ICPU(INTEL_FAM6_ATOM_GOLDMONT_PLUS),
+	X86_MATCH(ATOM_GOLDMONT),
+	X86_MATCH(ATOM_GOLDMONT_D),
+	X86_MATCH(ATOM_GOLDMONT_PLUS),
 	{}
 };
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index d54cffdc7cac..e85561fc0dc8 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -326,7 +326,6 @@ __visible void __noreturn handle_stack_overflow(const char *message,
 }
 #endif
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DOUBLEFAULT)
 /*
  * Runs on an IST stack for x86_64 and on a special task stack for x86_32.
  *
@@ -450,7 +449,6 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code, unsign
 	die("double fault", regs, error_code);
 	panic("Machine halted.");
 }
-#endif
 
 dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
 {
diff --git a/arch/x86/kernel/unwind_frame.c b/arch/x86/kernel/unwind_frame.c
index a224b5ab103f..54226110bc7f 100644
--- a/arch/x86/kernel/unwind_frame.c
+++ b/arch/x86/kernel/unwind_frame.c
@@ -344,6 +344,9 @@ bool unwind_next_frame(struct unwind_state *state)
 	if (IS_ENABLED(CONFIG_X86_32))
 		goto the_end;
 
+	if (state->task != current)
+		goto the_end;
+
 	if (state->regs) {
 		printk_deferred_once(KERN_WARNING
 			"WARNING: kernel stack regs at %p in %s:%d has bad 'bp' value %p\n",
diff --git a/arch/x86/kernel/unwind_orc.c b/arch/x86/kernel/unwind_orc.c
index e9cc182aa97e..0ebc11a8bb45 100644
--- a/arch/x86/kernel/unwind_orc.c
+++ b/arch/x86/kernel/unwind_orc.c
@@ -8,19 +8,25 @@
 #include <asm/orc_lookup.h>
 
 #define orc_warn(fmt, ...) \
-	printk_deferred_once(KERN_WARNING pr_fmt("WARNING: " fmt), ##__VA_ARGS__)
+	printk_deferred_once(KERN_WARNING "WARNING: " fmt, ##__VA_ARGS__)
+
+#define orc_warn_current(args...)					\
+({									\
+	if (state->task == current)					\
+		orc_warn(args);						\
+})
 
 extern int __start_orc_unwind_ip[];
 extern int __stop_orc_unwind_ip[];
 extern struct orc_entry __start_orc_unwind[];
 extern struct orc_entry __stop_orc_unwind[];
 
-static DEFINE_MUTEX(sort_mutex);
-int *cur_orc_ip_table = __start_orc_unwind_ip;
-struct orc_entry *cur_orc_table = __start_orc_unwind;
+static bool orc_init __ro_after_init;
+static unsigned int lookup_num_blocks __ro_after_init;
 
-unsigned int lookup_num_blocks;
-bool orc_init;
+static DEFINE_MUTEX(sort_mutex);
+static int *cur_orc_ip_table = __start_orc_unwind_ip;
+static struct orc_entry *cur_orc_table = __start_orc_unwind;
 
 static inline unsigned long orc_ip(const int *ip)
 {
@@ -142,9 +148,6 @@ static struct orc_entry *orc_find(unsigned long ip)
 {
 	static struct orc_entry *orc;
 
-	if (!orc_init)
-		return NULL;
-
 	if (ip == 0)
 		return &null_orc_entry;
 
@@ -381,9 +384,38 @@ static bool deref_stack_iret_regs(struct unwind_state *state, unsigned long addr
 	return true;
 }
 
+/*
+ * If state->regs is non-NULL, and points to a full pt_regs, just get the reg
+ * value from state->regs.
+ *
+ * Otherwise, if state->regs just points to IRET regs, and the previous frame
+ * had full regs, it's safe to get the value from the previous regs.  This can
+ * happen when early/late IRQ entry code gets interrupted by an NMI.
+ */
+static bool get_reg(struct unwind_state *state, unsigned int reg_off,
+		    unsigned long *val)
+{
+	unsigned int reg = reg_off/8;
+
+	if (!state->regs)
+		return false;
+
+	if (state->full_regs) {
+		*val = ((unsigned long *)state->regs)[reg];
+		return true;
+	}
+
+	if (state->prev_regs) {
+		*val = ((unsigned long *)state->prev_regs)[reg];
+		return true;
+	}
+
+	return false;
+}
+
 bool unwind_next_frame(struct unwind_state *state)
 {
-	unsigned long ip_p, sp, orig_ip = state->ip, prev_sp = state->sp;
+	unsigned long ip_p, sp, tmp, orig_ip = state->ip, prev_sp = state->sp;
 	enum stack_type prev_type = state->stack_info.type;
 	struct orc_entry *orc;
 	bool indirect = false;
@@ -445,43 +477,39 @@ bool unwind_next_frame(struct unwind_state *state)
 		break;
 
 	case ORC_REG_R10:
-		if (!state->regs || !state->full_regs) {
-			orc_warn("missing regs for base reg R10 at ip %pB\n",
-				 (void *)state->ip);
+		if (!get_reg(state, offsetof(struct pt_regs, r10), &sp)) {
+			orc_warn_current("missing R10 value at %pB\n",
+					 (void *)state->ip);
 			goto err;
 		}
-		sp = state->regs->r10;
 		break;
 
 	case ORC_REG_R13:
-		if (!state->regs || !state->full_regs) {
-			orc_warn("missing regs for base reg R13 at ip %pB\n",
-				 (void *)state->ip);
+		if (!get_reg(state, offsetof(struct pt_regs, r13), &sp)) {
+			orc_warn_current("missing R13 value at %pB\n",
+					 (void *)state->ip);
 			goto err;
 		}
-		sp = state->regs->r13;
 		break;
 
 	case ORC_REG_DI:
-		if (!state->regs || !state->full_regs) {
-			orc_warn("missing regs for base reg DI at ip %pB\n",
-				 (void *)state->ip);
+		if (!get_reg(state, offsetof(struct pt_regs, di), &sp)) {
+			orc_warn_current("missing RDI value at %pB\n",
+					 (void *)state->ip);
 			goto err;
 		}
-		sp = state->regs->di;
 		break;
 
 	case ORC_REG_DX:
-		if (!state->regs || !state->full_regs) {
-			orc_warn("missing regs for base reg DX at ip %pB\n",
-				 (void *)state->ip);
+		if (!get_reg(state, offsetof(struct pt_regs, dx), &sp)) {
+			orc_warn_current("missing DX value at %pB\n",
+					 (void *)state->ip);
 			goto err;
 		}
-		sp = state->regs->dx;
 		break;
 
 	default:
-		orc_warn("unknown SP base reg %d for ip %pB\n",
+		orc_warn("unknown SP base reg %d at %pB\n",
 			 orc->sp_reg, (void *)state->ip);
 		goto err;
 	}
@@ -504,44 +532,48 @@ bool unwind_next_frame(struct unwind_state *state)
 
 		state->sp = sp;
 		state->regs = NULL;
+		state->prev_regs = NULL;
 		state->signal = false;
 		break;
 
 	case ORC_TYPE_REGS:
 		if (!deref_stack_regs(state, sp, &state->ip, &state->sp)) {
-			orc_warn("can't dereference registers at %p for ip %pB\n",
-				 (void *)sp, (void *)orig_ip);
+			orc_warn_current("can't access registers at %pB\n",
+					 (void *)orig_ip);
 			goto err;
 		}
 
 		state->regs = (struct pt_regs *)sp;
+		state->prev_regs = NULL;
 		state->full_regs = true;
 		state->signal = true;
 		break;
 
 	case ORC_TYPE_REGS_IRET:
 		if (!deref_stack_iret_regs(state, sp, &state->ip, &state->sp)) {
-			orc_warn("can't dereference iret registers at %p for ip %pB\n",
-				 (void *)sp, (void *)orig_ip);
+			orc_warn_current("can't access iret registers at %pB\n",
+					 (void *)orig_ip);
 			goto err;
 		}
 
+		if (state->full_regs)
+			state->prev_regs = state->regs;
 		state->regs = (void *)sp - IRET_FRAME_OFFSET;
 		state->full_regs = false;
 		state->signal = true;
 		break;
 
 	default:
-		orc_warn("unknown .orc_unwind entry type %d for ip %pB\n",
+		orc_warn("unknown .orc_unwind entry type %d at %pB\n",
 			 orc->type, (void *)orig_ip);
-		break;
+		goto err;
 	}
 
 	/* Find BP: */
 	switch (orc->bp_reg) {
 	case ORC_REG_UNDEFINED:
-		if (state->regs && state->full_regs)
-			state->bp = state->regs->bp;
+		if (get_reg(state, offsetof(struct pt_regs, bp), &tmp))
+			state->bp = tmp;
 		break;
 
 	case ORC_REG_PREV_SP:
@@ -564,8 +596,8 @@ bool unwind_next_frame(struct unwind_state *state)
 	if (state->stack_info.type == prev_type &&
 	    on_stack(&state->stack_info, (void *)state->sp, sizeof(long)) &&
 	    state->sp <= prev_sp) {
-		orc_warn("stack going in the wrong direction? ip=%pB\n",
-			 (void *)orig_ip);
+		orc_warn_current("stack going in the wrong direction? at %pB\n",
+				 (void *)orig_ip);
 		goto err;
 	}
 
@@ -585,6 +617,9 @@ EXPORT_SYMBOL_GPL(unwind_next_frame);
 void __unwind_start(struct unwind_state *state, struct task_struct *task,
 		    struct pt_regs *regs, unsigned long *first_frame)
 {
+	if (!orc_init)
+		goto done;
+
 	memset(state, 0, sizeof(*state));
 	state->task = task;
 
@@ -651,7 +686,7 @@ void __unwind_start(struct unwind_state *state, struct task_struct *task,
 	/* Otherwise, skip ahead to the user-specified starting frame: */
 	while (!unwind_done(state) &&
 	       (!on_stack(&state->stack_info, first_frame, sizeof(long)) ||
-			state->sp <= (unsigned long)first_frame))
+			state->sp < (unsigned long)first_frame))
 		unwind_next_frame(state);
 
 	return;
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 901cd1fdecd9..6828be99b908 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -728,6 +728,9 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
 		cpuid_entry_override(entry, CPUID_8000_0001_EDX);
 		cpuid_entry_override(entry, CPUID_8000_0001_ECX);
 		break;
+	case 0x80000006:
+		/* L2 cache and TLB: pass through host info. */
+		break;
 	case 0x80000007: /* Advanced power management */
 		/* invariant TSC is CPUID.80000007H:EDX[8] */
 		entry->edx &= (1 << 8);
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index bcefa9d4e57e..71120720bf0d 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -900,7 +900,7 @@ static int kvm_hv_msr_set_crash_data(struct kvm_vcpu *vcpu,
  * These two equivalencies are implemented in this function.
  */
 static bool compute_tsc_page_parameters(struct pvclock_vcpu_time_info *hv_clock,
-					HV_REFERENCE_TSC_PAGE *tsc_ref)
+					struct ms_hyperv_tsc_page *tsc_ref)
 {
 	u64 max_mul;
 
@@ -941,7 +941,7 @@ void kvm_hv_setup_tsc_page(struct kvm *kvm,
 	u64 gfn;
 
 	BUILD_BUG_ON(sizeof(tsc_seq) != sizeof(hv->tsc_ref.tsc_sequence));
-	BUILD_BUG_ON(offsetof(HV_REFERENCE_TSC_PAGE, tsc_sequence) != 0);
+	BUILD_BUG_ON(offsetof(struct ms_hyperv_tsc_page, tsc_sequence) != 0);
 
 	if (!(hv->hv_tsc_page & HV_X64_MSR_TSC_REFERENCE_ENABLE))
 		return;
@@ -1425,8 +1425,7 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *current_vcpu, u64 ingpa,
 	 * vcpu->arch.cr3 may not be up-to-date for running vCPUs so we can't
 	 * analyze it here, flush TLB regardless of the specified address space.
 	 */
-	kvm_make_vcpus_request_mask(kvm,
-				    KVM_REQ_TLB_FLUSH | KVM_REQUEST_NO_WAKEUP,
+	kvm_make_vcpus_request_mask(kvm, KVM_REQ_HV_TLB_FLUSH,
 				    vcpu_mask, &hv_vcpu->tlb_flush);
 
 ret_success:
@@ -1800,8 +1799,8 @@ int kvm_vcpu_ioctl_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid,
 	};
 	int i, nent = ARRAY_SIZE(cpuid_entries);
 
-	if (kvm_x86_ops.nested_get_evmcs_version)
-		evmcs_ver = kvm_x86_ops.nested_get_evmcs_version(vcpu);
+	if (kvm_x86_ops.nested_ops->get_evmcs_version)
+		evmcs_ver = kvm_x86_ops.nested_ops->get_evmcs_version(vcpu);
 
 	/* Skip NESTED_FEATURES if eVMCS is not supported */
 	if (!evmcs_ver)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 9af25c97612a..38f7dc9c16ee 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1648,13 +1648,18 @@ static void start_sw_tscdeadline(struct kvm_lapic *apic)
 	local_irq_restore(flags);
 }
 
+static inline u64 tmict_to_ns(struct kvm_lapic *apic, u32 tmict)
+{
+	return (u64)tmict * APIC_BUS_CYCLE_NS * (u64)apic->divide_count;
+}
+
 static void update_target_expiration(struct kvm_lapic *apic, uint32_t old_divisor)
 {
 	ktime_t now, remaining;
 	u64 ns_remaining_old, ns_remaining_new;
 
-	apic->lapic_timer.period = (u64)kvm_lapic_get_reg(apic, APIC_TMICT)
-		* APIC_BUS_CYCLE_NS * apic->divide_count;
+	apic->lapic_timer.period =
+			tmict_to_ns(apic, kvm_lapic_get_reg(apic, APIC_TMICT));
 	limit_periodic_timer_frequency(apic);
 
 	now = ktime_get();
@@ -1672,14 +1677,15 @@ static void update_target_expiration(struct kvm_lapic *apic, uint32_t old_diviso
 	apic->lapic_timer.target_expiration = ktime_add_ns(now, ns_remaining_new);
 }
 
-static bool set_target_expiration(struct kvm_lapic *apic)
+static bool set_target_expiration(struct kvm_lapic *apic, u32 count_reg)
 {
 	ktime_t now;
 	u64 tscl = rdtsc();
+	s64 deadline;
 
 	now = ktime_get();
-	apic->lapic_timer.period = (u64)kvm_lapic_get_reg(apic, APIC_TMICT)
-		* APIC_BUS_CYCLE_NS * apic->divide_count;
+	apic->lapic_timer.period =
+			tmict_to_ns(apic, kvm_lapic_get_reg(apic, APIC_TMICT));
 
 	if (!apic->lapic_timer.period) {
 		apic->lapic_timer.tscdeadline = 0;
@@ -1687,10 +1693,32 @@ static bool set_target_expiration(struct kvm_lapic *apic)
 	}
 
 	limit_periodic_timer_frequency(apic);
+	deadline = apic->lapic_timer.period;
+
+	if (apic_lvtt_period(apic) || apic_lvtt_oneshot(apic)) {
+		if (unlikely(count_reg != APIC_TMICT)) {
+			deadline = tmict_to_ns(apic,
+				     kvm_lapic_get_reg(apic, count_reg));
+			if (unlikely(deadline <= 0))
+				deadline = apic->lapic_timer.period;
+			else if (unlikely(deadline > apic->lapic_timer.period)) {
+				pr_info_ratelimited(
+				    "kvm: vcpu %i: requested lapic timer restore with "
+				    "starting count register %#x=%u (%lld ns) > initial count (%lld ns). "
+				    "Using initial count to start timer.\n",
+				    apic->vcpu->vcpu_id,
+				    count_reg,
+				    kvm_lapic_get_reg(apic, count_reg),
+				    deadline, apic->lapic_timer.period);
+				kvm_lapic_set_reg(apic, count_reg, 0);
+				deadline = apic->lapic_timer.period;
+			}
+		}
+	}
 
 	apic->lapic_timer.tscdeadline = kvm_read_l1_tsc(apic->vcpu, tscl) +
-		nsec_to_cycles(apic->vcpu, apic->lapic_timer.period);
-	apic->lapic_timer.target_expiration = ktime_add_ns(now, apic->lapic_timer.period);
+		nsec_to_cycles(apic->vcpu, deadline);
+	apic->lapic_timer.target_expiration = ktime_add_ns(now, deadline);
 
 	return true;
 }
@@ -1872,17 +1900,22 @@ void kvm_lapic_restart_hv_timer(struct kvm_vcpu *vcpu)
 	restart_apic_timer(apic);
 }
 
-static void start_apic_timer(struct kvm_lapic *apic)
+static void __start_apic_timer(struct kvm_lapic *apic, u32 count_reg)
 {
 	atomic_set(&apic->lapic_timer.pending, 0);
 
 	if ((apic_lvtt_period(apic) || apic_lvtt_oneshot(apic))
-	    && !set_target_expiration(apic))
+	    && !set_target_expiration(apic, count_reg))
 		return;
 
 	restart_apic_timer(apic);
 }
 
+static void start_apic_timer(struct kvm_lapic *apic)
+{
+	__start_apic_timer(apic, APIC_TMICT);
+}
+
 static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 {
 	bool lvt0_in_nmi_mode = apic_lvt_nmi_mode(lvt0_val);
@@ -2493,6 +2526,14 @@ static int kvm_apic_state_fixup(struct kvm_vcpu *vcpu,
 int kvm_apic_get_state(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s)
 {
 	memcpy(s->regs, vcpu->arch.apic->regs, sizeof(*s));
+
+	/*
+	 * Get calculated timer current count for remaining timer period (if
+	 * any) and store it in the returned register set.
+	 */
+	__kvm_lapic_set_reg(s->regs, APIC_TMCCT,
+			    __apic_read(vcpu->arch.apic, APIC_TMCCT));
+
 	return kvm_apic_state_fixup(vcpu, s, false);
 }
 
@@ -2520,7 +2561,7 @@ int kvm_apic_set_state(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s)
 	apic_update_lvtt(apic);
 	apic_manage_nmi_watchdog(apic, kvm_lapic_get_reg(apic, APIC_LVT0));
 	update_divide_count(apic);
-	start_apic_timer(apic);
+	__start_apic_timer(apic, APIC_TMCCT);
 	kvm_apic_update_apicv(vcpu);
 	apic->highest_isr_cache = -1;
 	if (vcpu->arch.apicv_active) {
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index a0ffb4331418..7f15f9e69efe 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -161,9 +161,14 @@ static inline u32 kvm_lapic_get_reg(struct kvm_lapic *apic, int reg_off)
 	return *((u32 *) (apic->regs + reg_off));
 }
 
+static inline void __kvm_lapic_set_reg(char *regs, int reg_off, u32 val)
+{
+	*((u32 *) (regs + reg_off)) = val;
+}
+
 static inline void kvm_lapic_set_reg(struct kvm_lapic *apic, int reg_off, u32 val)
 {
-	*((u32 *) (apic->regs + reg_off)) = val;
+	__kvm_lapic_set_reg(apic->regs, reg_off, val);
 }
 
 extern struct static_key kvm_no_apic_vcpu;
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 8071952e9cf2..32da6d79a90b 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -78,6 +78,9 @@ module_param_cb(nx_huge_pages_recovery_ratio, &nx_huge_pages_recovery_ratio_ops,
 		&nx_huge_pages_recovery_ratio, 0644);
 __MODULE_PARM_TYPE(nx_huge_pages_recovery_ratio, "uint");
 
+static bool __read_mostly force_flush_and_sync_on_reuse;
+module_param_named(flush_on_reuse, force_flush_and_sync_on_reuse, bool, 0644);
+
 /*
  * When setting this variable to true it enables Two-Dimensional-Paging
  * where the hardware walks 2 page tables:
@@ -2153,10 +2156,6 @@ static int nonpaging_sync_page(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-static void nonpaging_invlpg(struct kvm_vcpu *vcpu, gva_t gva, hpa_t root)
-{
-}
-
 static void nonpaging_update_pte(struct kvm_vcpu *vcpu,
 				 struct kvm_mmu_page *sp, u64 *spte,
 				 const void *pte)
@@ -2313,7 +2312,7 @@ static void kvm_mmu_flush_or_zap(struct kvm_vcpu *vcpu,
 		return;
 
 	if (local_flush)
-		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
+		kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
 }
 
 #ifdef CONFIG_KVM_MMU_AUDIT
@@ -2520,11 +2519,11 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 				break;
 
 			WARN_ON(!list_empty(&invalid_list));
-			kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
+			kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
 		}
 
 		if (sp->unsync_children)
-			kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
+			kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
 
 		__clear_sp_write_flooding_count(sp);
 		trace_kvm_mmu_get_page(sp, false);
@@ -3125,7 +3124,7 @@ static int mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	if (set_spte_ret & SET_SPTE_WRITE_PROTECTED_PT) {
 		if (write_fault)
 			ret = RET_PF_EMULATE;
-		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
+		kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
 	}
 
 	if (set_spte_ret & SET_SPTE_NEED_REMOTE_TLB_FLUSH || flush)
@@ -3586,7 +3585,7 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 		/*
 		 * Currently, fast page fault only works for direct mapping
 		 * since the gfn is not stable for indirect shadow page. See
-		 * Documentation/virt/kvm/locking.txt to get more detail.
+		 * Documentation/virt/kvm/locking.rst to get more detail.
 		 */
 		fault_handled = fast_pf_fix_direct_spte(vcpu, sp,
 							iterator.sptep, spte,
@@ -3666,7 +3665,7 @@ void kvm_mmu_free_roots(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 							   &invalid_list);
 			mmu->root_hpa = INVALID_PAGE;
 		}
-		mmu->root_cr3 = 0;
+		mmu->root_pgd = 0;
 	}
 
 	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
@@ -3723,8 +3722,8 @@ static int mmu_alloc_direct_roots(struct kvm_vcpu *vcpu)
 	} else
 		BUG();
 
-	/* root_cr3 is ignored for direct MMUs. */
-	vcpu->arch.mmu->root_cr3 = 0;
+	/* root_pgd is ignored for direct MMUs. */
+	vcpu->arch.mmu->root_pgd = 0;
 
 	return 0;
 }
@@ -3733,11 +3732,11 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu_page *sp;
 	u64 pdptr, pm_mask;
-	gfn_t root_gfn, root_cr3;
+	gfn_t root_gfn, root_pgd;
 	int i;
 
-	root_cr3 = vcpu->arch.mmu->get_guest_pgd(vcpu);
-	root_gfn = root_cr3 >> PAGE_SHIFT;
+	root_pgd = vcpu->arch.mmu->get_guest_pgd(vcpu);
+	root_gfn = root_pgd >> PAGE_SHIFT;
 
 	if (mmu_check_root(vcpu, root_gfn))
 		return 1;
@@ -3762,7 +3761,7 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 		++sp->root_count;
 		spin_unlock(&vcpu->kvm->mmu_lock);
 		vcpu->arch.mmu->root_hpa = root;
-		goto set_root_cr3;
+		goto set_root_pgd;
 	}
 
 	/*
@@ -3828,8 +3827,8 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 		vcpu->arch.mmu->root_hpa = __pa(vcpu->arch.mmu->lm_root);
 	}
 
-set_root_cr3:
-	vcpu->arch.mmu->root_cr3 = root_cr3;
+set_root_pgd:
+	vcpu->arch.mmu->root_pgd = root_pgd;
 
 	return 0;
 }
@@ -4083,18 +4082,16 @@ static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
 			 gpa_t cr2_or_gpa, kvm_pfn_t *pfn, bool write,
 			 bool *writable)
 {
-	struct kvm_memory_slot *slot;
+	struct kvm_memory_slot *slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
 	bool async;
 
-	/*
-	 * Don't expose private memslots to L2.
-	 */
-	if (is_guest_mode(vcpu) && !kvm_is_visible_gfn(vcpu->kvm, gfn)) {
+	/* Don't expose private memslots to L2. */
+	if (is_guest_mode(vcpu) && !kvm_is_visible_memslot(slot)) {
 		*pfn = KVM_PFN_NOSLOT;
+		*writable = false;
 		return false;
 	}
 
-	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
 	async = false;
 	*pfn = __gfn_to_pfn_memslot(slot, gfn, false, &async, write, writable);
 	if (!async)
@@ -4237,7 +4234,7 @@ static void nonpaging_init_context(struct kvm_vcpu *vcpu,
 	context->page_fault = nonpaging_page_fault;
 	context->gva_to_gpa = nonpaging_gva_to_gpa;
 	context->sync_page = nonpaging_sync_page;
-	context->invlpg = nonpaging_invlpg;
+	context->invlpg = NULL;
 	context->update_pte = nonpaging_update_pte;
 	context->root_level = 0;
 	context->shadow_root_level = PT32E_ROOT_LEVEL;
@@ -4245,51 +4242,50 @@ static void nonpaging_init_context(struct kvm_vcpu *vcpu,
 	context->nx = false;
 }
 
-static inline bool is_root_usable(struct kvm_mmu_root_info *root, gpa_t cr3,
+static inline bool is_root_usable(struct kvm_mmu_root_info *root, gpa_t pgd,
 				  union kvm_mmu_page_role role)
 {
-	return (role.direct || cr3 == root->cr3) &&
+	return (role.direct || pgd == root->pgd) &&
 	       VALID_PAGE(root->hpa) && page_header(root->hpa) &&
 	       role.word == page_header(root->hpa)->role.word;
 }
 
 /*
- * Find out if a previously cached root matching the new CR3/role is available.
+ * Find out if a previously cached root matching the new pgd/role is available.
  * The current root is also inserted into the cache.
  * If a matching root was found, it is assigned to kvm_mmu->root_hpa and true is
  * returned.
  * Otherwise, the LRU root from the cache is assigned to kvm_mmu->root_hpa and
  * false is returned. This root should now be freed by the caller.
  */
-static bool cached_root_available(struct kvm_vcpu *vcpu, gpa_t new_cr3,
+static bool cached_root_available(struct kvm_vcpu *vcpu, gpa_t new_pgd,
 				  union kvm_mmu_page_role new_role)
 {
 	uint i;
 	struct kvm_mmu_root_info root;
 	struct kvm_mmu *mmu = vcpu->arch.mmu;
 
-	root.cr3 = mmu->root_cr3;
+	root.pgd = mmu->root_pgd;
 	root.hpa = mmu->root_hpa;
 
-	if (is_root_usable(&root, new_cr3, new_role))
+	if (is_root_usable(&root, new_pgd, new_role))
 		return true;
 
 	for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++) {
 		swap(root, mmu->prev_roots[i]);
 
-		if (is_root_usable(&root, new_cr3, new_role))
+		if (is_root_usable(&root, new_pgd, new_role))
 			break;
 	}
 
 	mmu->root_hpa = root.hpa;
-	mmu->root_cr3 = root.cr3;
+	mmu->root_pgd = root.pgd;
 
 	return i < KVM_MMU_NUM_PREV_ROOTS;
 }
 
-static bool fast_cr3_switch(struct kvm_vcpu *vcpu, gpa_t new_cr3,
-			    union kvm_mmu_page_role new_role,
-			    bool skip_tlb_flush)
+static bool fast_pgd_switch(struct kvm_vcpu *vcpu, gpa_t new_pgd,
+			    union kvm_mmu_page_role new_role)
 {
 	struct kvm_mmu *mmu = vcpu->arch.mmu;
 
@@ -4299,70 +4295,59 @@ static bool fast_cr3_switch(struct kvm_vcpu *vcpu, gpa_t new_cr3,
 	 * later if necessary.
 	 */
 	if (mmu->shadow_root_level >= PT64_ROOT_4LEVEL &&
-	    mmu->root_level >= PT64_ROOT_4LEVEL) {
-		if (mmu_check_root(vcpu, new_cr3 >> PAGE_SHIFT))
-			return false;
-
-		if (cached_root_available(vcpu, new_cr3, new_role)) {
-			/*
-			 * It is possible that the cached previous root page is
-			 * obsolete because of a change in the MMU generation
-			 * number. However, changing the generation number is
-			 * accompanied by KVM_REQ_MMU_RELOAD, which will free
-			 * the root set here and allocate a new one.
-			 */
-			kvm_make_request(KVM_REQ_LOAD_MMU_PGD, vcpu);
-			if (!skip_tlb_flush) {
-				kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
-				kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
-			}
-
-			/*
-			 * The last MMIO access's GVA and GPA are cached in the
-			 * VCPU. When switching to a new CR3, that GVA->GPA
-			 * mapping may no longer be valid. So clear any cached
-			 * MMIO info even when we don't need to sync the shadow
-			 * page tables.
-			 */
-			vcpu_clear_mmio_info(vcpu, MMIO_GVA_ANY);
-
-			__clear_sp_write_flooding_count(
-				page_header(mmu->root_hpa));
-
-			return true;
-		}
-	}
+	    mmu->root_level >= PT64_ROOT_4LEVEL)
+		return !mmu_check_root(vcpu, new_pgd >> PAGE_SHIFT) &&
+		       cached_root_available(vcpu, new_pgd, new_role);
 
 	return false;
 }
 
-static void __kvm_mmu_new_cr3(struct kvm_vcpu *vcpu, gpa_t new_cr3,
+static void __kvm_mmu_new_pgd(struct kvm_vcpu *vcpu, gpa_t new_pgd,
 			      union kvm_mmu_page_role new_role,
-			      bool skip_tlb_flush)
+			      bool skip_tlb_flush, bool skip_mmu_sync)
 {
-	if (!fast_cr3_switch(vcpu, new_cr3, new_role, skip_tlb_flush))
-		kvm_mmu_free_roots(vcpu, vcpu->arch.mmu,
-				   KVM_MMU_ROOT_CURRENT);
+	if (!fast_pgd_switch(vcpu, new_pgd, new_role)) {
+		kvm_mmu_free_roots(vcpu, vcpu->arch.mmu, KVM_MMU_ROOT_CURRENT);
+		return;
+	}
+
+	/*
+	 * It's possible that the cached previous root page is obsolete because
+	 * of a change in the MMU generation number. However, changing the
+	 * generation number is accompanied by KVM_REQ_MMU_RELOAD, which will
+	 * free the root set here and allocate a new one.
+	 */
+	kvm_make_request(KVM_REQ_LOAD_MMU_PGD, vcpu);
+
+	if (!skip_mmu_sync || force_flush_and_sync_on_reuse)
+		kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
+	if (!skip_tlb_flush || force_flush_and_sync_on_reuse)
+		kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
+
+	/*
+	 * The last MMIO access's GVA and GPA are cached in the VCPU. When
+	 * switching to a new CR3, that GVA->GPA mapping may no longer be
+	 * valid. So clear any cached MMIO info even when we don't need to sync
+	 * the shadow page tables.
+	 */
+	vcpu_clear_mmio_info(vcpu, MMIO_GVA_ANY);
+
+	__clear_sp_write_flooding_count(page_header(vcpu->arch.mmu->root_hpa));
 }
 
-void kvm_mmu_new_cr3(struct kvm_vcpu *vcpu, gpa_t new_cr3, bool skip_tlb_flush)
+void kvm_mmu_new_pgd(struct kvm_vcpu *vcpu, gpa_t new_pgd, bool skip_tlb_flush,
+		     bool skip_mmu_sync)
 {
-	__kvm_mmu_new_cr3(vcpu, new_cr3, kvm_mmu_calc_root_page_role(vcpu),
-			  skip_tlb_flush);
+	__kvm_mmu_new_pgd(vcpu, new_pgd, kvm_mmu_calc_root_page_role(vcpu),
+			  skip_tlb_flush, skip_mmu_sync);
 }
-EXPORT_SYMBOL_GPL(kvm_mmu_new_cr3);
+EXPORT_SYMBOL_GPL(kvm_mmu_new_pgd);
 
 static unsigned long get_cr3(struct kvm_vcpu *vcpu)
 {
 	return kvm_read_cr3(vcpu);
 }
 
-static void inject_page_fault(struct kvm_vcpu *vcpu,
-			      struct x86_exception *fault)
-{
-	vcpu->arch.mmu->inject_page_fault(vcpu, fault);
-}
-
 static bool sync_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, gfn_t gfn,
 			   unsigned int access, int *nr_present)
 {
@@ -4928,7 +4913,7 @@ static void init_kvm_tdp_mmu(struct kvm_vcpu *vcpu)
 	context->mmu_role.as_u64 = new_role.as_u64;
 	context->page_fault = kvm_tdp_page_fault;
 	context->sync_page = nonpaging_sync_page;
-	context->invlpg = nonpaging_invlpg;
+	context->invlpg = NULL;
 	context->update_pte = nonpaging_update_pte;
 	context->shadow_root_level = kvm_x86_ops.get_tdp_level(vcpu);
 	context->direct_map = true;
@@ -5047,7 +5032,7 @@ void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly,
 		kvm_calc_shadow_ept_root_page_role(vcpu, accessed_dirty,
 						   execonly, level);
 
-	__kvm_mmu_new_cr3(vcpu, new_eptp, new_role.base, false);
+	__kvm_mmu_new_pgd(vcpu, new_eptp, new_role.base, true, true);
 
 	if (new_role.as_u64 == context->mmu_role.as_u64)
 		return;
@@ -5096,6 +5081,12 @@ static void init_kvm_nested_mmu(struct kvm_vcpu *vcpu)
 	g_context->get_pdptr         = kvm_pdptr_read;
 	g_context->inject_page_fault = kvm_inject_page_fault;
 
+	/*
+	 * L2 page tables are never shadowed, so there is no need to sync
+	 * SPTEs.
+	 */
+	g_context->invlpg            = NULL;
+
 	/*
 	 * Note that arch.mmu->gva_to_gpa translates l2_gpa to l1_gpa using
 	 * L1's nested page tables (e.g. EPT12). The nested translation
@@ -5183,7 +5174,7 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
 	if (r)
 		goto out;
 	kvm_mmu_load_pgd(vcpu);
-	kvm_x86_ops.tlb_flush(vcpu, true);
+	kvm_x86_ops.tlb_flush_current(vcpu);
 out:
 	return r;
 }
@@ -5497,37 +5488,54 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, u64 error_code,
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_page_fault);
 
-void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva)
+void kvm_mmu_invalidate_gva(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
+			    gva_t gva, hpa_t root_hpa)
 {
-	struct kvm_mmu *mmu = vcpu->arch.mmu;
 	int i;
 
-	/* INVLPG on a * non-canonical address is a NOP according to the SDM.  */
-	if (is_noncanonical_address(gva, vcpu))
+	/* It's actually a GPA for vcpu->arch.guest_mmu.  */
+	if (mmu != &vcpu->arch.guest_mmu) {
+		/* INVLPG on a non-canonical address is a NOP according to the SDM.  */
+		if (is_noncanonical_address(gva, vcpu))
+			return;
+
+		kvm_x86_ops.tlb_flush_gva(vcpu, gva);
+	}
+
+	if (!mmu->invlpg)
 		return;
 
-	mmu->invlpg(vcpu, gva, mmu->root_hpa);
+	if (root_hpa == INVALID_PAGE) {
+		mmu->invlpg(vcpu, gva, mmu->root_hpa);
 
-	/*
-	 * INVLPG is required to invalidate any global mappings for the VA,
-	 * irrespective of PCID. Since it would take us roughly similar amount
-	 * of work to determine whether any of the prev_root mappings of the VA
-	 * is marked global, or to just sync it blindly, so we might as well
-	 * just always sync it.
-	 *
-	 * Mappings not reachable via the current cr3 or the prev_roots will be
-	 * synced when switching to that cr3, so nothing needs to be done here
-	 * for them.
-	 */
-	for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
-		if (VALID_PAGE(mmu->prev_roots[i].hpa))
-			mmu->invlpg(vcpu, gva, mmu->prev_roots[i].hpa);
+		/*
+		 * INVLPG is required to invalidate any global mappings for the VA,
+		 * irrespective of PCID. Since it would take us roughly similar amount
+		 * of work to determine whether any of the prev_root mappings of the VA
+		 * is marked global, or to just sync it blindly, so we might as well
+		 * just always sync it.
+		 *
+		 * Mappings not reachable via the current cr3 or the prev_roots will be
+		 * synced when switching to that cr3, so nothing needs to be done here
+		 * for them.
+		 */
+		for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
+			if (VALID_PAGE(mmu->prev_roots[i].hpa))
+				mmu->invlpg(vcpu, gva, mmu->prev_roots[i].hpa);
+	} else {
+		mmu->invlpg(vcpu, gva, root_hpa);
+	}
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_invalidate_gva);
 
-	kvm_x86_ops.tlb_flush_gva(vcpu, gva);
+void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva)
+{
+	kvm_mmu_invalidate_gva(vcpu, vcpu->arch.mmu, gva, INVALID_PAGE);
 	++vcpu->stat.invlpg;
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_invlpg);
 
+
 void kvm_mmu_invpcid_gva(struct kvm_vcpu *vcpu, gva_t gva, unsigned long pcid)
 {
 	struct kvm_mmu *mmu = vcpu->arch.mmu;
@@ -5541,7 +5549,7 @@ void kvm_mmu_invpcid_gva(struct kvm_vcpu *vcpu, gva_t gva, unsigned long pcid)
 
 	for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++) {
 		if (VALID_PAGE(mmu->prev_roots[i].hpa) &&
-		    pcid == kvm_get_pcid(vcpu, mmu->prev_roots[i].cr3)) {
+		    pcid == kvm_get_pcid(vcpu, mmu->prev_roots[i].pgd)) {
 			mmu->invlpg(vcpu, gva, mmu->prev_roots[i].hpa);
 			tlb_flush = true;
 		}
@@ -5695,13 +5703,13 @@ int kvm_mmu_create(struct kvm_vcpu *vcpu)
 	vcpu->arch.walk_mmu = &vcpu->arch.root_mmu;
 
 	vcpu->arch.root_mmu.root_hpa = INVALID_PAGE;
-	vcpu->arch.root_mmu.root_cr3 = 0;
+	vcpu->arch.root_mmu.root_pgd = 0;
 	vcpu->arch.root_mmu.translate_gpa = translate_gpa;
 	for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
 		vcpu->arch.root_mmu.prev_roots[i] = KVM_MMU_ROOT_INFO_INVALID;
 
 	vcpu->arch.guest_mmu.root_hpa = INVALID_PAGE;
-	vcpu->arch.guest_mmu.root_cr3 = 0;
+	vcpu->arch.guest_mmu.root_pgd = 0;
 	vcpu->arch.guest_mmu.translate_gpa = translate_gpa;
 	for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
 		vcpu->arch.guest_mmu.prev_roots[i] = KVM_MMU_ROOT_INFO_INVALID;
diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h
index 9bdf9b7d9a96..efec7d27b8c5 100644
--- a/arch/x86/kvm/mmu/paging_tmpl.h
+++ b/arch/x86/kvm/mmu/paging_tmpl.h
@@ -812,7 +812,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gpa_t addr, u32 error_code,
 	if (!r) {
 		pgprintk("%s: guest page fault\n", __func__);
 		if (!prefault)
-			inject_page_fault(vcpu, &walker.fault);
+			kvm_inject_emulated_page_fault(vcpu, &walker.fault);
 
 		return RET_PF_RETRY;
 	}
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 90a1ca939627..a7c3b3030e59 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -207,6 +207,10 @@ static bool nested_vmcb_checks(struct vmcb *vmcb)
 	if ((vmcb->save.efer & EFER_SVME) == 0)
 		return false;
 
+	if (((vmcb->save.cr0 & X86_CR0_CD) == 0) &&
+	    (vmcb->save.cr0 & X86_CR0_NW))
+		return false;
+
 	if ((vmcb->control.intercept & (1ULL << INTERCEPT_VMRUN)) == 0)
 		return false;
 
@@ -279,7 +283,7 @@ void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
 	svm->nested.intercept_exceptions = nested_vmcb->control.intercept_exceptions;
 	svm->nested.intercept            = nested_vmcb->control.intercept;
 
-	svm_flush_tlb(&svm->vcpu, true);
+	svm_flush_tlb(&svm->vcpu);
 	svm->vmcb->control.int_ctl = nested_vmcb->control.int_ctl | V_INTR_MASKING_MASK;
 	if (nested_vmcb->control.int_ctl & V_INTR_MASKING_MASK)
 		svm->vcpu.arch.hflags |= HF_VINTR_MASK;
@@ -341,8 +345,12 @@ int nested_svm_vmrun(struct vcpu_svm *svm)
 	struct kvm_host_map map;
 	u64 vmcb_gpa;
 
-	vmcb_gpa = svm->vmcb->save.rax;
+	if (is_smm(&svm->vcpu)) {
+		kvm_queue_exception(&svm->vcpu, UD_VECTOR);
+		return 1;
+	}
 
+	vmcb_gpa = svm->vmcb->save.rax;
 	ret = kvm_vcpu_map(&svm->vcpu, gpa_to_gfn(vmcb_gpa), &map);
 	if (ret == -EINVAL) {
 		kvm_inject_gp(&svm->vcpu, 0);
@@ -780,7 +788,7 @@ static bool nested_exit_on_intr(struct vcpu_svm *svm)
 	return (svm->nested.intercept & 1ULL);
 }
 
-int svm_check_nested_events(struct kvm_vcpu *vcpu)
+static int svm_check_nested_events(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	bool block_nested_events =
@@ -821,3 +829,7 @@ int nested_svm_exit_special(struct vcpu_svm *svm)
 
 	return NESTED_EXIT_CONTINUE;
 }
+
+struct kvm_x86_nested_ops svm_nested_ops = {
+	.check_events = svm_check_nested_events,
+};
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index cf912b4aaba8..5573a97f1520 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -336,8 +336,7 @@ static struct page **sev_pin_memory(struct kvm *kvm, unsigned long uaddr,
 	/* Avoid using vmalloc for smaller buffers. */
 	size = npages * sizeof(struct page *);
 	if (size > PAGE_SIZE)
-		pages = __vmalloc(size, GFP_KERNEL_ACCOUNT | __GFP_ZERO,
-				  PAGE_KERNEL);
+		pages = __vmalloc(size, GFP_KERNEL_ACCOUNT | __GFP_ZERO);
 	else
 		pages = kmalloc(size, GFP_KERNEL_ACCOUNT);
 
@@ -345,7 +344,7 @@ static struct page **sev_pin_memory(struct kvm *kvm, unsigned long uaddr,
 		return NULL;
 
 	/* Pin the user virtual address. */
-	npinned = get_user_pages_fast(uaddr, npages, FOLL_WRITE, pages);
+	npinned = get_user_pages_fast(uaddr, npages, write ? FOLL_WRITE : 0, pages);
 	if (npinned != npages) {
 		pr_err("SEV: Failure locking %lu pages.\n", npages);
 		goto err;
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 2f379bacbb26..42fe74db3123 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -33,6 +33,7 @@
 #include <asm/debugreg.h>
 #include <asm/kvm_para.h>
 #include <asm/irq_remapping.h>
+#include <asm/mce.h>
 #include <asm/spec-ctrl.h>
 #include <asm/cpu_device_id.h>
 
@@ -1603,7 +1604,7 @@ int svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 		return 1;
 
 	if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
-		svm_flush_tlb(vcpu, true);
+		svm_flush_tlb(vcpu);
 
 	vcpu->arch.cr4 = cr4;
 	if (!npt_enabled)
@@ -1839,6 +1840,25 @@ static bool is_erratum_383(void)
 	return true;
 }
 
+/*
+ * Trigger machine check on the host. We assume all the MSRs are already set up
+ * by the CPU and that we still run on the same CPU as the MCE occurred on.
+ * We pass a fake environment to the machine check handler because we want
+ * the guest to be always treated like user space, no matter what context
+ * it used internally.
+ */
+static void kvm_machine_check(void)
+{
+#if defined(CONFIG_X86_MCE)
+	struct pt_regs regs = {
+		.cs = 3, /* Fake ring 3 no matter what the guest ran on */
+		.flags = X86_EFLAGS_IF,
+	};
+
+	do_machine_check(&regs, 0);
+#endif
+}
+
 static void svm_handle_mce(struct vcpu_svm *svm)
 {
 	if (is_erratum_383()) {
@@ -1857,11 +1877,7 @@ static void svm_handle_mce(struct vcpu_svm *svm)
 	 * On an #MC intercept the MCE handler is not called automatically in
 	 * the host. So do it by hand here.
 	 */
-	asm volatile (
-		"int $0x12\n");
-	/* not sure if we ever come back to this point */
-
-	return;
+	kvm_machine_check();
 }
 
 static int mc_interception(struct vcpu_svm *svm)
@@ -3153,10 +3169,17 @@ static int svm_set_identity_map_addr(struct kvm *kvm, u64 ident_addr)
 	return 0;
 }
 
-void svm_flush_tlb(struct kvm_vcpu *vcpu, bool invalidate_gpa)
+void svm_flush_tlb(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
+	/*
+	 * Flush only the current ASID even if the TLB flush was invoked via
+	 * kvm_flush_remote_tlbs().  Although flushing remote TLBs requires all
+	 * ASIDs to be flushed, KVM uses a single ASID for L1 and L2, and
+	 * unconditionally does a TLB flush on both nested VM-Enter and nested
+	 * VM-Exit (via kvm_mmu_reset_context()).
+	 */
 	if (static_cpu_has(X86_FEATURE_FLUSHBYASID))
 		svm->vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ASID;
 	else
@@ -3276,10 +3299,21 @@ static void svm_cancel_injection(struct kvm_vcpu *vcpu)
 	svm_complete_interrupts(svm);
 }
 
+static enum exit_fastpath_completion svm_exit_handlers_fastpath(struct kvm_vcpu *vcpu)
+{
+	if (!is_guest_mode(vcpu) &&
+	    to_svm(vcpu)->vmcb->control.exit_code == SVM_EXIT_MSR &&
+	    to_svm(vcpu)->vmcb->control.exit_info_1)
+		return handle_fastpath_set_msr_irqoff(vcpu);
+
+	return EXIT_FASTPATH_NONE;
+}
+
 void __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
 
-static void svm_vcpu_run(struct kvm_vcpu *vcpu)
+static __no_kcsan enum exit_fastpath_completion svm_vcpu_run(struct kvm_vcpu *vcpu)
 {
+	enum exit_fastpath_completion exit_fastpath;
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	svm->vmcb->save.rax = vcpu->arch.regs[VCPU_REGS_RAX];
@@ -3291,7 +3325,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	 * again.
 	 */
 	if (unlikely(svm->nested.exit_required))
-		return;
+		return EXIT_FASTPATH_NONE;
 
 	/*
 	 * Disable singlestep if we're injecting an interrupt/exception.
@@ -3375,6 +3409,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	stgi();
 
 	/* Any pending NMI will happen here */
+	exit_fastpath = svm_exit_handlers_fastpath(vcpu);
 
 	if (unlikely(svm->vmcb->control.exit_code == SVM_EXIT_NMI))
 		kvm_after_interrupt(&svm->vcpu);
@@ -3403,6 +3438,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 		svm_handle_mce(svm);
 
 	mark_all_clean(svm->vmcb);
+	return exit_fastpath;
 }
 
 static void svm_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long root)
@@ -3704,13 +3740,8 @@ static int svm_check_intercept(struct kvm_vcpu *vcpu,
 	return ret;
 }
 
-static void svm_handle_exit_irqoff(struct kvm_vcpu *vcpu,
-	enum exit_fastpath_completion *exit_fastpath)
+static void svm_handle_exit_irqoff(struct kvm_vcpu *vcpu)
 {
-	if (!is_guest_mode(vcpu) &&
-	    to_svm(vcpu)->vmcb->control.exit_code == SVM_EXIT_MSR &&
-	    to_svm(vcpu)->vmcb->control.exit_info_1)
-		*exit_fastpath = handle_fastpath_set_msr_irqoff(vcpu);
 }
 
 static void svm_sched_in(struct kvm_vcpu *vcpu, int cpu)
@@ -3806,6 +3837,13 @@ static bool svm_need_emulation_on_page_fault(struct kvm_vcpu *vcpu)
 	bool smap = cr4 & X86_CR4_SMAP;
 	bool is_user = svm_get_cpl(vcpu) == 3;
 
+	/*
+	 * If RIP is invalid, go ahead with emulation which will cause an
+	 * internal error exit.
+	 */
+	if (!kvm_vcpu_gfn_to_memslot(vcpu, kvm_rip_read(vcpu) >> PAGE_SHIFT))
+		return true;
+
 	/*
 	 * Detect and workaround Errata 1096 Fam_17h_00_0Fh.
 	 *
@@ -3864,9 +3902,9 @@ static bool svm_apic_init_signal_blocked(struct kvm_vcpu *vcpu)
 	/*
 	 * TODO: Last condition latch INIT signals on vCPU when
 	 * vCPU is in guest-mode and vmcb12 defines intercept on INIT.
-	 * To properly emulate the INIT intercept, SVM should implement
-	 * kvm_x86_ops.check_nested_events() and call nested_svm_vmexit()
-	 * there if an INIT signal is pending.
+	 * To properly emulate the INIT intercept,
+	 * svm_check_nested_events() should call nested_svm_vmexit()
+	 * if an INIT signal is pending.
 	 */
 	return !gif_set(svm) ||
 		   (svm->vmcb->control.intercept & (1ULL << INTERCEPT_INIT));
@@ -3937,8 +3975,10 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
 	.get_rflags = svm_get_rflags,
 	.set_rflags = svm_set_rflags,
 
-	.tlb_flush = svm_flush_tlb,
+	.tlb_flush_all = svm_flush_tlb,
+	.tlb_flush_current = svm_flush_tlb,
 	.tlb_flush_gva = svm_flush_tlb_gva,
+	.tlb_flush_guest = svm_flush_tlb,
 
 	.run = svm_vcpu_run,
 	.handle_exit = handle_exit,
@@ -3992,6 +4032,8 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
 	.sched_in = svm_sched_in,
 
 	.pmu_ops = &amd_pmu_ops,
+	.nested_ops = &svm_nested_ops,
+
 	.deliver_posted_interrupt = svm_deliver_avic_intr,
 	.dy_apicv_has_pending_interrupt = svm_dy_apicv_has_pending_interrupt,
 	.update_pi_irte = svm_update_pi_irte,
@@ -4006,14 +4048,9 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
 	.mem_enc_reg_region = svm_register_enc_region,
 	.mem_enc_unreg_region = svm_unregister_enc_region,
 
-	.nested_enable_evmcs = NULL,
-	.nested_get_evmcs_version = NULL,
-
 	.need_emulation_on_page_fault = svm_need_emulation_on_page_fault,
 
 	.apic_init_signal_blocked = svm_apic_init_signal_blocked,
-
-	.check_nested_events = svm_check_nested_events,
 };
 
 static struct kvm_x86_init_ops svm_init_ops __initdata = {
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index df3474f4fb02..98c2890d561d 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -360,7 +360,7 @@ u32 svm_msrpm_offset(u32 msr);
 void svm_set_efer(struct kvm_vcpu *vcpu, u64 efer);
 void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
 int svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
-void svm_flush_tlb(struct kvm_vcpu *vcpu, bool invalidate_gpa);
+void svm_flush_tlb(struct kvm_vcpu *vcpu);
 void disable_nmi_singlestep(struct vcpu_svm *svm);
 
 /* nested.c */
@@ -398,9 +398,10 @@ int nested_svm_exit_handled(struct vcpu_svm *svm);
 int nested_svm_check_permissions(struct vcpu_svm *svm);
 int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 			       bool has_error_code, u32 error_code);
-int svm_check_nested_events(struct kvm_vcpu *vcpu);
 int nested_svm_exit_special(struct vcpu_svm *svm);
 
+extern struct kvm_x86_nested_ops svm_nested_ops;
+
 /* avic.c */
 
 #define AVIC_LOGICAL_ID_ENTRY_GUEST_PHYSICAL_ID_MASK	(0xFF)
diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
index 303813423c3e..e5325bd0f304 100644
--- a/arch/x86/kvm/vmx/evmcs.c
+++ b/arch/x86/kvm/vmx/evmcs.c
@@ -4,6 +4,7 @@
 #include <linux/smp.h>
 
 #include "../hyperv.h"
+#include "../cpuid.h"
 #include "evmcs.h"
 #include "vmcs.h"
 #include "vmx.h"
@@ -160,14 +161,6 @@ const struct evmcs_field vmcs_field_to_evmcs_1[] = {
 		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
 	EVMCS1_FIELD(VM_ENTRY_MSR_LOAD_ADDR, vm_entry_msr_load_addr,
 		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(CR3_TARGET_VALUE0, cr3_target_value0,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(CR3_TARGET_VALUE1, cr3_target_value1,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(CR3_TARGET_VALUE2, cr3_target_value2,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
-	EVMCS1_FIELD(CR3_TARGET_VALUE3, cr3_target_value3,
-		     HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
 
 	/* 32 bit rw */
 	EVMCS1_FIELD(TPR_THRESHOLD, tpr_threshold,
@@ -334,17 +327,18 @@ bool nested_enlightened_vmentry(struct kvm_vcpu *vcpu, u64 *evmcs_gpa)
 
 uint16_t nested_get_evmcs_version(struct kvm_vcpu *vcpu)
 {
-       struct vcpu_vmx *vmx = to_vmx(vcpu);
-       /*
-        * vmcs_version represents the range of supported Enlightened VMCS
-        * versions: lower 8 bits is the minimal version, higher 8 bits is the
-        * maximum supported version. KVM supports versions from 1 to
-        * KVM_EVMCS_VERSION.
-        */
-       if (vmx->nested.enlightened_vmcs_enabled)
-               return (KVM_EVMCS_VERSION << 8) | 1;
-
-       return 0;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	/*
+	 * vmcs_version represents the range of supported Enlightened VMCS
+	 * versions: lower 8 bits is the minimal version, higher 8 bits is the
+	 * maximum supported version. KVM supports versions from 1 to
+	 * KVM_EVMCS_VERSION.
+	 */
+	if (kvm_cpu_cap_get(X86_FEATURE_VMX) &&
+	    vmx->nested.enlightened_vmcs_enabled)
+		return (KVM_EVMCS_VERSION << 8) | 1;
+
+	return 0;
 }
 
 void nested_evmcs_filter_control_msr(u32 msr_index, u64 *pdata)
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index fd78ffbde644..b516c24494e3 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -307,7 +307,7 @@ static void vmx_switch_vmcs(struct kvm_vcpu *vcpu, struct loaded_vmcs *vmcs)
 	vmx_sync_vmcs_host_state(vmx, prev);
 	put_cpu();
 
-	vmx_segment_cache_clear(vmx);
+	vmx_register_cache_reset(vcpu);
 }
 
 /*
@@ -328,19 +328,19 @@ static void nested_ept_inject_page_fault(struct kvm_vcpu *vcpu,
 {
 	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u32 exit_reason;
+	u32 vm_exit_reason;
 	unsigned long exit_qualification = vcpu->arch.exit_qualification;
 
 	if (vmx->nested.pml_full) {
-		exit_reason = EXIT_REASON_PML_FULL;
+		vm_exit_reason = EXIT_REASON_PML_FULL;
 		vmx->nested.pml_full = false;
 		exit_qualification &= INTR_INFO_UNBLOCK_NMI;
 	} else if (fault->error_code & PFERR_RSVD_MASK)
-		exit_reason = EXIT_REASON_EPT_MISCONFIG;
+		vm_exit_reason = EXIT_REASON_EPT_MISCONFIG;
 	else
-		exit_reason = EXIT_REASON_EPT_VIOLATION;
+		vm_exit_reason = EXIT_REASON_EPT_VIOLATION;
 
-	nested_vmx_vmexit(vcpu, exit_reason, 0, exit_qualification);
+	nested_vmx_vmexit(vcpu, vm_exit_reason, 0, exit_qualification);
 	vmcs12->guest_physical_address = fault->address;
 }
 
@@ -1073,6 +1073,48 @@ static bool nested_cr3_valid(struct kvm_vcpu *vcpu, unsigned long val)
 	return (val & invalid_mask) == 0;
 }
 
+/*
+ * Returns true if the MMU needs to be sync'd on nested VM-Enter/VM-Exit.
+ * tl;dr: the MMU needs a sync if L0 is using shadow paging and L1 didn't
+ * enable VPID for L2 (implying it expects a TLB flush on VMX transitions).
+ * Here's why.
+ *
+ * If EPT is enabled by L0 a sync is never needed:
+ * - if it is disabled by L1, then L0 is not shadowing L1 or L2 PTEs, there
+ *   cannot be unsync'd SPTEs for either L1 or L2.
+ *
+ * - if it is also enabled by L1, then L0 doesn't need to sync on VM-Enter
+ *   VM-Enter as VM-Enter isn't required to invalidate guest-physical mappings
+ *   (irrespective of VPID), i.e. L1 can't rely on the (virtual) CPU to flush
+ *   stale guest-physical mappings for L2 from the TLB.  And as above, L0 isn't
+ *   shadowing L1 PTEs so there are no unsync'd SPTEs to sync on VM-Exit.
+ *
+ * If EPT is disabled by L0:
+ * - if VPID is enabled by L1 (for L2), the situation is similar to when L1
+ *   enables EPT: L0 doesn't need to sync as VM-Enter and VM-Exit aren't
+ *   required to invalidate linear mappings (EPT is disabled so there are
+ *   no combined or guest-physical mappings), i.e. L1 can't rely on the
+ *   (virtual) CPU to flush stale linear mappings for either L2 or itself (L1).
+ *
+ * - however if VPID is disabled by L1, then a sync is needed as L1 expects all
+ *   linear mappings (EPT is disabled so there are no combined or guest-physical
+ *   mappings) to be invalidated on both VM-Enter and VM-Exit.
+ *
+ * Note, this logic is subtly different than nested_has_guest_tlb_tag(), which
+ * additionally checks that L2 has been assigned a VPID (when EPT is disabled).
+ * Whether or not L2 has been assigned a VPID by L0 is irrelevant with respect
+ * to L1's expectations, e.g. L0 needs to invalidate hardware TLB entries if L2
+ * doesn't have a unique VPID to prevent reusing L1's entries (assuming L1 has
+ * been assigned a VPID), but L0 doesn't need to do a MMU sync because L1
+ * doesn't expect stale (virtual) TLB entries to be flushed, i.e. L1 doesn't
+ * know that L0 will flush the TLB and so L1 will do INVVPID as needed to flush
+ * stale TLB entries, at which point L0 will sync L2's MMU.
+ */
+static bool nested_vmx_transition_mmu_sync(struct kvm_vcpu *vcpu)
+{
+	return !enable_ept && !nested_cpu_has_vpid(get_vmcs12(vcpu));
+}
+
 /*
  * Load guest's/host's cr3 at nested entry/exit.  @nested_ept is true if we are
  * emulating VM-Entry into a guest with EPT enabled.  On failure, the expected
@@ -1100,8 +1142,14 @@ static int nested_vmx_load_cr3(struct kvm_vcpu *vcpu, unsigned long cr3, bool ne
 		}
 	}
 
+	/*
+	 * Unconditionally skip the TLB flush on fast CR3 switch, all TLB
+	 * flushes are handled by nested_vmx_transition_tlb_flush().  See
+	 * nested_vmx_transition_mmu_sync for details on skipping the MMU sync.
+	 */
 	if (!nested_ept)
-		kvm_mmu_new_cr3(vcpu, cr3, false);
+		kvm_mmu_new_pgd(vcpu, cr3, true,
+				!nested_vmx_transition_mmu_sync(vcpu));
 
 	vcpu->arch.cr3 = cr3;
 	kvm_register_mark_available(vcpu, VCPU_EXREG_CR3);
@@ -1132,11 +1180,48 @@ static bool nested_has_guest_tlb_tag(struct kvm_vcpu *vcpu)
 	       (nested_cpu_has_vpid(vmcs12) && to_vmx(vcpu)->nested.vpid02);
 }
 
-static u16 nested_get_vpid02(struct kvm_vcpu *vcpu)
+static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu,
+					    struct vmcs12 *vmcs12,
+					    bool is_vmenter)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
-	return vmx->nested.vpid02 ? vmx->nested.vpid02 : vmx->vpid;
+	/*
+	 * If VPID is disabled, linear and combined mappings are flushed on
+	 * VM-Enter/VM-Exit, and guest-physical mappings are valid only for
+	 * their associated EPTP.
+	 */
+	if (!enable_vpid)
+		return;
+
+	/*
+	 * If vmcs12 doesn't use VPID, L1 expects linear and combined mappings
+	 * for *all* contexts to be flushed on VM-Enter/VM-Exit.
+	 *
+	 * If VPID is enabled and used by vmc12, but L2 does not have a unique
+	 * TLB tag (ASID), i.e. EPT is disabled and KVM was unable to allocate
+	 * a VPID for L2, flush the current context as the effective ASID is
+	 * common to both L1 and L2.
+	 *
+	 * Defer the flush so that it runs after vmcs02.EPTP has been set by
+	 * KVM_REQ_LOAD_MMU_PGD (if nested EPT is enabled) and to avoid
+	 * redundant flushes further down the nested pipeline.
+	 *
+	 * If a TLB flush isn't required due to any of the above, and vpid12 is
+	 * changing then the new "virtual" VPID (vpid12) will reuse the same
+	 * "real" VPID (vpid02), and so needs to be sync'd.  There is no direct
+	 * mapping between vpid02 and vpid12, vpid02 is per-vCPU and reused for
+	 * all nested vCPUs.
+	 */
+	if (!nested_cpu_has_vpid(vmcs12)) {
+		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
+	} else if (!nested_has_guest_tlb_tag(vcpu)) {
+		kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
+	} else if (is_vmenter &&
+		   vmcs12->virtual_processor_id != vmx->nested.last_vpid) {
+		vmx->nested.last_vpid = vmcs12->virtual_processor_id;
+		vpid_sync_context(nested_get_vpid02(vcpu));
+	}
 }
 
 static bool is_bitwise_subset(u64 superset, u64 subset, u64 mask)
@@ -1700,10 +1785,6 @@ static int copy_enlightened_to_vmcs12(struct vcpu_vmx *vmx)
 	 * vmcs12->vm_exit_msr_store_addr = evmcs->vm_exit_msr_store_addr;
 	 * vmcs12->vm_exit_msr_load_addr = evmcs->vm_exit_msr_load_addr;
 	 * vmcs12->vm_entry_msr_load_addr = evmcs->vm_entry_msr_load_addr;
-	 * vmcs12->cr3_target_value0 = evmcs->cr3_target_value0;
-	 * vmcs12->cr3_target_value1 = evmcs->cr3_target_value1;
-	 * vmcs12->cr3_target_value2 = evmcs->cr3_target_value2;
-	 * vmcs12->cr3_target_value3 = evmcs->cr3_target_value3;
 	 * vmcs12->page_fault_error_code_mask =
 	 *		evmcs->page_fault_error_code_mask;
 	 * vmcs12->page_fault_error_code_match =
@@ -1777,10 +1858,6 @@ static int copy_vmcs12_to_enlightened(struct vcpu_vmx *vmx)
 	 * evmcs->vm_exit_msr_store_addr = vmcs12->vm_exit_msr_store_addr;
 	 * evmcs->vm_exit_msr_load_addr = vmcs12->vm_exit_msr_load_addr;
 	 * evmcs->vm_entry_msr_load_addr = vmcs12->vm_entry_msr_load_addr;
-	 * evmcs->cr3_target_value0 = vmcs12->cr3_target_value0;
-	 * evmcs->cr3_target_value1 = vmcs12->cr3_target_value1;
-	 * evmcs->cr3_target_value2 = vmcs12->cr3_target_value2;
-	 * evmcs->cr3_target_value3 = vmcs12->cr3_target_value3;
 	 * evmcs->tpr_threshold = vmcs12->tpr_threshold;
 	 * evmcs->virtual_processor_id = vmcs12->virtual_processor_id;
 	 * evmcs->exception_bitmap = vmcs12->exception_bitmap;
@@ -2447,32 +2524,7 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 	if (kvm_has_tsc_control)
 		decache_tsc_multiplier(vmx);
 
-	if (enable_vpid) {
-		/*
-		 * There is no direct mapping between vpid02 and vpid12, the
-		 * vpid02 is per-vCPU for L0 and reused while the value of
-		 * vpid12 is changed w/ one invvpid during nested vmentry.
-		 * The vpid12 is allocated by L1 for L2, so it will not
-		 * influence global bitmap(for vpid01 and vpid02 allocation)
-		 * even if spawn a lot of nested vCPUs.
-		 */
-		if (nested_cpu_has_vpid(vmcs12) && nested_has_guest_tlb_tag(vcpu)) {
-			if (vmcs12->virtual_processor_id != vmx->nested.last_vpid) {
-				vmx->nested.last_vpid = vmcs12->virtual_processor_id;
-				__vmx_flush_tlb(vcpu, nested_get_vpid02(vcpu), false);
-			}
-		} else {
-			/*
-			 * If L1 use EPT, then L0 needs to execute INVEPT on
-			 * EPTP02 instead of EPTP01. Therefore, delay TLB
-			 * flush until vmcs02->eptp is fully updated by
-			 * KVM_REQ_LOAD_MMU_PGD. Note that this assumes
-			 * KVM_REQ_TLB_FLUSH is evaluated after
-			 * KVM_REQ_LOAD_MMU_PGD in vcpu_enter_guest().
-			 */
-			kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
-		}
-	}
+	nested_vmx_transition_tlb_flush(vcpu, vmcs12, true);
 
 	if (nested_cpu_has_ept(vmcs12))
 		nested_ept_init_mmu_context(vcpu);
@@ -3198,6 +3250,9 @@ enum nvmx_vmentry_status nested_vmx_enter_non_root_mode(struct kvm_vcpu *vcpu,
 	u32 exit_reason = EXIT_REASON_INVALID_STATE;
 	u32 exit_qual;
 
+	if (kvm_check_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu))
+		kvm_vcpu_flush_tlb_current(vcpu);
+
 	evaluate_pending_interrupts = exec_controls_get(vmx) &
 		(CPU_BASED_INTR_WINDOW_EXITING | CPU_BASED_NMI_WINDOW_EXITING);
 	if (likely(!evaluate_pending_interrupts) && kvm_vcpu_apicv_active(vcpu))
@@ -3939,11 +3994,11 @@ static void sync_vmcs02_to_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
  * which already writes to vmcs12 directly.
  */
 static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
-			   u32 exit_reason, u32 exit_intr_info,
+			   u32 vm_exit_reason, u32 exit_intr_info,
 			   unsigned long exit_qualification)
 {
 	/* update exit information fields: */
-	vmcs12->vm_exit_reason = exit_reason;
+	vmcs12->vm_exit_reason = vm_exit_reason;
 	vmcs12->exit_qualification = exit_qualification;
 	vmcs12->vm_exit_intr_info = exit_intr_info;
 
@@ -4040,24 +4095,7 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 	if (!enable_ept)
 		vcpu->arch.walk_mmu->inject_page_fault = kvm_inject_page_fault;
 
-	/*
-	 * If vmcs01 doesn't use VPID, CPU flushes TLB on every
-	 * VMEntry/VMExit. Thus, no need to flush TLB.
-	 *
-	 * If vmcs12 doesn't use VPID, L1 expects TLB to be
-	 * flushed on every VMEntry/VMExit.
-	 *
-	 * Otherwise, we can preserve TLB entries as long as we are
-	 * able to tag L1 TLB entries differently than L2 TLB entries.
-	 *
-	 * If vmcs12 uses EPT, we need to execute this flush on EPTP01
-	 * and therefore we request the TLB flush to happen only after VMCS EPTP
-	 * has been set by KVM_REQ_LOAD_MMU_PGD.
-	 */
-	if (enable_vpid &&
-	    (!nested_cpu_has_vpid(vmcs12) || !nested_has_guest_tlb_tag(vcpu))) {
-		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
-	}
+	nested_vmx_transition_tlb_flush(vcpu, vmcs12, false);
 
 	vmcs_write32(GUEST_SYSENTER_CS, vmcs12->host_ia32_sysenter_cs);
 	vmcs_writel(GUEST_SYSENTER_ESP, vmcs12->host_ia32_sysenter_esp);
@@ -4204,7 +4242,7 @@ static void nested_vmx_restore_host_state(struct kvm_vcpu *vcpu)
 	 * VMFail, like everything else we just need to ensure our
 	 * software model is up-to-date.
 	 */
-	if (enable_ept)
+	if (enable_ept && is_pae_paging(vcpu))
 		ept_save_pdptrs(vcpu);
 
 	kvm_mmu_reset_context(vcpu);
@@ -4272,7 +4310,7 @@ static void nested_vmx_restore_host_state(struct kvm_vcpu *vcpu)
  * and modify vmcs12 to make it see what it would expect to see there if
  * L2 was its real guest. Must only be called when in L2 (is_guest_mode())
  */
-void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
+void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 vm_exit_reason,
 		       u32 exit_intr_info, unsigned long exit_qualification)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -4281,6 +4319,10 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
 	/* trying to cancel vmlaunch/vmresume is a bug */
 	WARN_ON_ONCE(vmx->nested.nested_run_pending);
 
+	/* Service the TLB flush request for L2 before switching to L1. */
+	if (kvm_check_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu))
+		kvm_vcpu_flush_tlb_current(vcpu);
+
 	leave_guest_mode(vcpu);
 
 	if (nested_cpu_has_preemption_timer(vmcs12))
@@ -4292,9 +4334,9 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
 	if (likely(!vmx->fail)) {
 		sync_vmcs02_to_vmcs12(vcpu, vmcs12);
 
-		if (exit_reason != -1)
-			prepare_vmcs12(vcpu, vmcs12, exit_reason, exit_intr_info,
-				       exit_qualification);
+		if (vm_exit_reason != -1)
+			prepare_vmcs12(vcpu, vmcs12, vm_exit_reason,
+				       exit_intr_info, exit_qualification);
 
 		/*
 		 * Must happen outside of sync_vmcs02_to_vmcs12() as it will
@@ -4344,20 +4386,20 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
 	kvm_vcpu_unmap(vcpu, &vmx->nested.pi_desc_map, true);
 	vmx->nested.pi_desc = NULL;
 
-	/*
-	 * We are now running in L2, mmu_notifier will force to reload the
-	 * page's hpa for L2 vmcs. Need to reload it for L1 before entering L1.
-	 */
-	kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
+	if (vmx->nested.reload_vmcs01_apic_access_page) {
+		vmx->nested.reload_vmcs01_apic_access_page = false;
+		kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
+	}
 
-	if ((exit_reason != -1) && (enable_shadow_vmcs || vmx->nested.hv_evmcs))
+	if ((vm_exit_reason != -1) &&
+	    (enable_shadow_vmcs || vmx->nested.hv_evmcs))
 		vmx->nested.need_vmcs12_to_shadow_sync = true;
 
 	/* in case we halted in L2 */
 	vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 
 	if (likely(!vmx->fail)) {
-		if (exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT &&
+		if ((u16)vm_exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT &&
 		    nested_exit_intr_ack_set(vcpu)) {
 			int irq = kvm_cpu_get_interrupt(vcpu);
 			WARN_ON(irq < 0);
@@ -4365,7 +4407,7 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
 				INTR_INFO_VALID_MASK | INTR_TYPE_EXT_INTR;
 		}
 
-		if (exit_reason != -1)
+		if (vm_exit_reason != -1)
 			trace_kvm_nested_vmexit_inject(vmcs12->vm_exit_reason,
 						       vmcs12->exit_qualification,
 						       vmcs12->idt_vectoring_info_field,
@@ -4554,13 +4596,13 @@ static int nested_vmx_get_vmptr(struct kvm_vcpu *vcpu, gpa_t *vmpointer)
 	gva_t gva;
 	struct x86_exception e;
 
-	if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION),
+	if (get_vmx_mem_address(vcpu, vmx_get_exit_qual(vcpu),
 				vmcs_read32(VMX_INSTRUCTION_INFO), false,
 				sizeof(*vmpointer), &gva))
 		return 1;
 
 	if (kvm_read_guest_virt(vcpu, gva, vmpointer, sizeof(*vmpointer), &e)) {
-		kvm_inject_page_fault(vcpu, &e);
+		kvm_inject_emulated_page_fault(vcpu, &e);
 		return 1;
 	}
 
@@ -4819,7 +4861,7 @@ static int handle_vmread(struct kvm_vcpu *vcpu)
 {
 	struct vmcs12 *vmcs12 = is_guest_mode(vcpu) ? get_shadow_vmcs12(vcpu)
 						    : get_vmcs12(vcpu);
-	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	unsigned long exit_qualification = vmx_get_exit_qual(vcpu);
 	u32 instr_info = vmcs_read32(VMX_INSTRUCTION_INFO);
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	struct x86_exception e;
@@ -4869,7 +4911,7 @@ static int handle_vmread(struct kvm_vcpu *vcpu)
 			return 1;
 		/* _system ok, nested_vmx_check_permission has verified cpl=0 */
 		if (kvm_write_guest_virt_system(vcpu, gva, &value, len, &e)) {
-			kvm_inject_page_fault(vcpu, &e);
+			kvm_inject_emulated_page_fault(vcpu, &e);
 			return 1;
 		}
 	}
@@ -4905,7 +4947,7 @@ static int handle_vmwrite(struct kvm_vcpu *vcpu)
 {
 	struct vmcs12 *vmcs12 = is_guest_mode(vcpu) ? get_shadow_vmcs12(vcpu)
 						    : get_vmcs12(vcpu);
-	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	unsigned long exit_qualification = vmx_get_exit_qual(vcpu);
 	u32 instr_info = vmcs_read32(VMX_INSTRUCTION_INFO);
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	struct x86_exception e;
@@ -4943,7 +4985,7 @@ static int handle_vmwrite(struct kvm_vcpu *vcpu)
 					instr_info, false, len, &gva))
 			return 1;
 		if (kvm_read_guest_virt(vcpu, gva, &value, len, &e)) {
-			kvm_inject_page_fault(vcpu, &e);
+			kvm_inject_emulated_page_fault(vcpu, &e);
 			return 1;
 		}
 	}
@@ -5090,7 +5132,7 @@ static int handle_vmptrld(struct kvm_vcpu *vcpu)
 /* Emulate the VMPTRST instruction */
 static int handle_vmptrst(struct kvm_vcpu *vcpu)
 {
-	unsigned long exit_qual = vmcs_readl(EXIT_QUALIFICATION);
+	unsigned long exit_qual = vmx_get_exit_qual(vcpu);
 	u32 instr_info = vmcs_read32(VMX_INSTRUCTION_INFO);
 	gpa_t current_vmptr = to_vmx(vcpu)->nested.current_vmptr;
 	struct x86_exception e;
@@ -5108,23 +5150,33 @@ static int handle_vmptrst(struct kvm_vcpu *vcpu)
 	/* *_system ok, nested_vmx_check_permission has verified cpl=0 */
 	if (kvm_write_guest_virt_system(vcpu, gva, (void *)&current_vmptr,
 					sizeof(gpa_t), &e)) {
-		kvm_inject_page_fault(vcpu, &e);
+		kvm_inject_emulated_page_fault(vcpu, &e);
 		return 1;
 	}
 	return nested_vmx_succeed(vcpu);
 }
 
+#define EPTP_PA_MASK   GENMASK_ULL(51, 12)
+
+static bool nested_ept_root_matches(hpa_t root_hpa, u64 root_eptp, u64 eptp)
+{
+	return VALID_PAGE(root_hpa) &&
+		((root_eptp & EPTP_PA_MASK) == (eptp & EPTP_PA_MASK));
+}
+
 /* Emulate the INVEPT instruction */
 static int handle_invept(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 vmx_instruction_info, types;
-	unsigned long type;
+	unsigned long type, roots_to_free;
+	struct kvm_mmu *mmu;
 	gva_t gva;
 	struct x86_exception e;
 	struct {
 		u64 eptp, gpa;
 	} operand;
+	int i;
 
 	if (!(vmx->nested.msrs.secondary_ctls_high &
 	      SECONDARY_EXEC_ENABLE_EPT) ||
@@ -5148,27 +5200,49 @@ static int handle_invept(struct kvm_vcpu *vcpu)
 	/* According to the Intel VMX instruction reference, the memory
 	 * operand is read even if it isn't needed (e.g., for type==global)
 	 */
-	if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION),
+	if (get_vmx_mem_address(vcpu, vmx_get_exit_qual(vcpu),
 			vmx_instruction_info, false, sizeof(operand), &gva))
 		return 1;
 	if (kvm_read_guest_virt(vcpu, gva, &operand, sizeof(operand), &e)) {
-		kvm_inject_page_fault(vcpu, &e);
+		kvm_inject_emulated_page_fault(vcpu, &e);
 		return 1;
 	}
 
-	switch (type) {
-	case VMX_EPT_EXTENT_GLOBAL:
-	case VMX_EPT_EXTENT_CONTEXT:
 	/*
-	 * TODO: Sync the necessary shadow EPT roots here, rather than
-	 * at the next emulated VM-entry.
+	 * Nested EPT roots are always held through guest_mmu,
+	 * not root_mmu.
 	 */
+	mmu = &vcpu->arch.guest_mmu;
+
+	switch (type) {
+	case VMX_EPT_EXTENT_CONTEXT:
+		if (!nested_vmx_check_eptp(vcpu, operand.eptp))
+			return nested_vmx_failValid(vcpu,
+				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
+
+		roots_to_free = 0;
+		if (nested_ept_root_matches(mmu->root_hpa, mmu->root_pgd,
+					    operand.eptp))
+			roots_to_free |= KVM_MMU_ROOT_CURRENT;
+
+		for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++) {
+			if (nested_ept_root_matches(mmu->prev_roots[i].hpa,
+						    mmu->prev_roots[i].pgd,
+						    operand.eptp))
+				roots_to_free |= KVM_MMU_ROOT_PREVIOUS(i);
+		}
+		break;
+	case VMX_EPT_EXTENT_GLOBAL:
+		roots_to_free = KVM_MMU_ROOTS_ALL;
 		break;
 	default:
 		BUG_ON(1);
 		break;
 	}
 
+	if (roots_to_free)
+		kvm_mmu_free_roots(vcpu, mmu, roots_to_free);
+
 	return nested_vmx_succeed(vcpu);
 }
 
@@ -5208,11 +5282,11 @@ static int handle_invvpid(struct kvm_vcpu *vcpu)
 	/* according to the intel vmx instruction reference, the memory
 	 * operand is read even if it isn't needed (e.g., for type==global)
 	 */
-	if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION),
+	if (get_vmx_mem_address(vcpu, vmx_get_exit_qual(vcpu),
 			vmx_instruction_info, false, sizeof(operand), &gva))
 		return 1;
 	if (kvm_read_guest_virt(vcpu, gva, &operand, sizeof(operand), &e)) {
-		kvm_inject_page_fault(vcpu, &e);
+		kvm_inject_emulated_page_fault(vcpu, &e);
 		return 1;
 	}
 	if (operand.vpid >> 16)
@@ -5226,27 +5300,37 @@ static int handle_invvpid(struct kvm_vcpu *vcpu)
 		    is_noncanonical_address(operand.gla, vcpu))
 			return nested_vmx_failValid(vcpu,
 				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
-		if (cpu_has_vmx_invvpid_individual_addr()) {
-			__invvpid(VMX_VPID_EXTENT_INDIVIDUAL_ADDR,
-				vpid02, operand.gla);
-		} else
-			__vmx_flush_tlb(vcpu, vpid02, false);
+		vpid_sync_vcpu_addr(vpid02, operand.gla);
 		break;
 	case VMX_VPID_EXTENT_SINGLE_CONTEXT:
 	case VMX_VPID_EXTENT_SINGLE_NON_GLOBAL:
 		if (!operand.vpid)
 			return nested_vmx_failValid(vcpu,
 				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
-		__vmx_flush_tlb(vcpu, vpid02, false);
+		vpid_sync_context(vpid02);
 		break;
 	case VMX_VPID_EXTENT_ALL_CONTEXT:
-		__vmx_flush_tlb(vcpu, vpid02, false);
+		vpid_sync_context(vpid02);
 		break;
 	default:
 		WARN_ON_ONCE(1);
 		return kvm_skip_emulated_instruction(vcpu);
 	}
 
+	/*
+	 * Sync the shadow page tables if EPT is disabled, L1 is invalidating
+	 * linear mappings for L2 (tagged with L2's VPID).  Free all roots as
+	 * VPIDs are not tracked in the MMU role.
+	 *
+	 * Note, this operates on root_mmu, not guest_mmu, as L1 and L2 share
+	 * an MMU when EPT is disabled.
+	 *
+	 * TODO: sync only the affected SPTEs for INVDIVIDUAL_ADDR.
+	 */
+	if (!enable_ept)
+		kvm_mmu_free_roots(vcpu, &vcpu->arch.root_mmu,
+				   KVM_MMU_ROOTS_ALL);
+
 	return nested_vmx_succeed(vcpu);
 }
 
@@ -5327,8 +5411,8 @@ static int handle_vmfunc(struct kvm_vcpu *vcpu)
 
 fail:
 	nested_vmx_vmexit(vcpu, vmx->exit_reason,
-			  vmcs_read32(VM_EXIT_INTR_INFO),
-			  vmcs_readl(EXIT_QUALIFICATION));
+			  vmx_get_intr_info(vcpu),
+			  vmx_get_exit_qual(vcpu));
 	return 1;
 }
 
@@ -5379,7 +5463,7 @@ static bool nested_vmx_exit_handled_io(struct kvm_vcpu *vcpu,
 	if (!nested_cpu_has(vmcs12, CPU_BASED_USE_IO_BITMAPS))
 		return nested_cpu_has(vmcs12, CPU_BASED_UNCOND_IO_EXITING);
 
-	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	exit_qualification = vmx_get_exit_qual(vcpu);
 
 	port = exit_qualification >> 16;
 	size = (exit_qualification & 7) + 1;
@@ -5433,7 +5517,7 @@ static bool nested_vmx_exit_handled_msr(struct kvm_vcpu *vcpu,
 static bool nested_vmx_exit_handled_cr(struct kvm_vcpu *vcpu,
 	struct vmcs12 *vmcs12)
 {
-	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	unsigned long exit_qualification = vmx_get_exit_qual(vcpu);
 	int cr = exit_qualification & 15;
 	int reg;
 	unsigned long val;
@@ -5449,15 +5533,6 @@ static bool nested_vmx_exit_handled_cr(struct kvm_vcpu *vcpu,
 				return true;
 			break;
 		case 3:
-			if ((vmcs12->cr3_target_count >= 1 &&
-					vmcs12->cr3_target_value0 == val) ||
-				(vmcs12->cr3_target_count >= 2 &&
-					vmcs12->cr3_target_value1 == val) ||
-				(vmcs12->cr3_target_count >= 3 &&
-					vmcs12->cr3_target_value2 == val) ||
-				(vmcs12->cr3_target_count >= 4 &&
-					vmcs12->cr3_target_value3 == val))
-				return false;
 			if (nested_cpu_has(vmcs12, CPU_BASED_CR3_LOAD_EXITING))
 				return true;
 			break;
@@ -5551,49 +5626,85 @@ static bool nested_vmx_exit_handled_mtf(struct vmcs12 *vmcs12)
 }
 
 /*
- * Return true if we should exit from L2 to L1 to handle an exit, or false if we
- * should handle it ourselves in L0 (and then continue L2). Only call this
- * when in is_guest_mode (L2).
+ * Return true if L0 wants to handle an exit from L2 regardless of whether or not
+ * L1 wants the exit.  Only call this when in is_guest_mode (L2).
  */
-bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason)
+static bool nested_vmx_l0_wants_exit(struct kvm_vcpu *vcpu, u32 exit_reason)
 {
-	u32 intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
-
-	WARN_ON_ONCE(vmx->nested.nested_run_pending);
-
-	if (unlikely(vmx->fail)) {
-		trace_kvm_nested_vmenter_failed(
-			"hardware VM-instruction error: ",
-			vmcs_read32(VM_INSTRUCTION_ERROR));
-		return true;
-	}
-
-	trace_kvm_nested_vmexit(kvm_rip_read(vcpu), exit_reason,
-				vmcs_readl(EXIT_QUALIFICATION),
-				vmx->idt_vectoring_info,
-				intr_info,
-				vmcs_read32(VM_EXIT_INTR_ERROR_CODE),
-				KVM_ISA_VMX);
+	u32 intr_info;
 
 	switch (exit_reason) {
 	case EXIT_REASON_EXCEPTION_NMI:
+		intr_info = vmx_get_intr_info(vcpu);
 		if (is_nmi(intr_info))
-			return false;
+			return true;
 		else if (is_page_fault(intr_info))
-			return !vmx->vcpu.arch.apf.host_apf_reason && enable_ept;
+			return vcpu->arch.apf.host_apf_reason || !enable_ept;
 		else if (is_debug(intr_info) &&
 			 vcpu->guest_debug &
 			 (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
-			return false;
+			return true;
 		else if (is_breakpoint(intr_info) &&
 			 vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
-			return false;
+			return true;
+		return false;
+	case EXIT_REASON_EXTERNAL_INTERRUPT:
+		return true;
+	case EXIT_REASON_MCE_DURING_VMENTRY:
+		return true;
+	case EXIT_REASON_EPT_VIOLATION:
+		/*
+		 * L0 always deals with the EPT violation. If nested EPT is
+		 * used, and the nested mmu code discovers that the address is
+		 * missing in the guest EPT table (EPT12), the EPT violation
+		 * will be injected with nested_ept_inject_page_fault()
+		 */
+		return true;
+	case EXIT_REASON_EPT_MISCONFIG:
+		/*
+		 * L2 never uses directly L1's EPT, but rather L0's own EPT
+		 * table (shadow on EPT) or a merged EPT table that L0 built
+		 * (EPT on EPT). So any problems with the structure of the
+		 * table is L0's fault.
+		 */
+		return true;
+	case EXIT_REASON_PREEMPTION_TIMER:
+		return true;
+	case EXIT_REASON_PML_FULL:
+		/* We emulate PML support to L1. */
+		return true;
+	case EXIT_REASON_VMFUNC:
+		/* VM functions are emulated through L2->L0 vmexits. */
+		return true;
+	case EXIT_REASON_ENCLS:
+		/* SGX is never exposed to L1 */
+		return true;
+	default:
+		break;
+	}
+	return false;
+}
+
+/*
+ * Return 1 if L1 wants to intercept an exit from L2.  Only call this when in
+ * is_guest_mode (L2).
+ */
+static bool nested_vmx_l1_wants_exit(struct kvm_vcpu *vcpu, u32 exit_reason)
+{
+	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+	u32 intr_info;
+
+	switch (exit_reason) {
+	case EXIT_REASON_EXCEPTION_NMI:
+		intr_info = vmx_get_intr_info(vcpu);
+		if (is_nmi(intr_info))
+			return true;
+		else if (is_page_fault(intr_info))
+			return true;
 		return vmcs12->exception_bitmap &
 				(1u << (intr_info & INTR_INFO_VECTOR_MASK));
 	case EXIT_REASON_EXTERNAL_INTERRUPT:
-		return false;
+		return nested_exit_on_intr(vcpu);
 	case EXIT_REASON_TRIPLE_FAULT:
 		return true;
 	case EXIT_REASON_INTERRUPT_WINDOW:
@@ -5658,7 +5769,7 @@ bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason)
 			nested_cpu_has2(vmcs12,
 				SECONDARY_EXEC_PAUSE_LOOP_EXITING);
 	case EXIT_REASON_MCE_DURING_VMENTRY:
-		return false;
+		return true;
 	case EXIT_REASON_TPR_BELOW_THRESHOLD:
 		return nested_cpu_has(vmcs12, CPU_BASED_TPR_SHADOW);
 	case EXIT_REASON_APIC_ACCESS:
@@ -5670,22 +5781,6 @@ bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason)
 		 * delivery" only come from vmcs12.
 		 */
 		return true;
-	case EXIT_REASON_EPT_VIOLATION:
-		/*
-		 * L0 always deals with the EPT violation. If nested EPT is
-		 * used, and the nested mmu code discovers that the address is
-		 * missing in the guest EPT table (EPT12), the EPT violation
-		 * will be injected with nested_ept_inject_page_fault()
-		 */
-		return false;
-	case EXIT_REASON_EPT_MISCONFIG:
-		/*
-		 * L2 never uses directly L1's EPT, but rather L0's own EPT
-		 * table (shadow on EPT) or a merged EPT table that L0 built
-		 * (EPT on EPT). So any problems with the structure of the
-		 * table is L0's fault.
-		 */
-		return false;
 	case EXIT_REASON_INVPCID:
 		return
 			nested_cpu_has2(vmcs12, SECONDARY_EXEC_ENABLE_INVPCID) &&
@@ -5702,17 +5797,6 @@ bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason)
 		 * the XSS exit bitmap in vmcs12.
 		 */
 		return nested_cpu_has2(vmcs12, SECONDARY_EXEC_XSAVES);
-	case EXIT_REASON_PREEMPTION_TIMER:
-		return false;
-	case EXIT_REASON_PML_FULL:
-		/* We emulate PML support to L1. */
-		return false;
-	case EXIT_REASON_VMFUNC:
-		/* VM functions are emulated through L2->L0 vmexits. */
-		return false;
-	case EXIT_REASON_ENCLS:
-		/* SGX is never exposed to L1 */
-		return false;
 	case EXIT_REASON_UMWAIT:
 	case EXIT_REASON_TPAUSE:
 		return nested_cpu_has2(vmcs12,
@@ -5722,6 +5806,67 @@ bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason)
 	}
 }
 
+/*
+ * Conditionally reflect a VM-Exit into L1.  Returns %true if the VM-Exit was
+ * reflected into L1.
+ */
+bool nested_vmx_reflect_vmexit(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	u32 exit_reason = vmx->exit_reason;
+	unsigned long exit_qual;
+	u32 exit_intr_info;
+
+	WARN_ON_ONCE(vmx->nested.nested_run_pending);
+
+	/*
+	 * Late nested VM-Fail shares the same flow as nested VM-Exit since KVM
+	 * has already loaded L2's state.
+	 */
+	if (unlikely(vmx->fail)) {
+		trace_kvm_nested_vmenter_failed(
+			"hardware VM-instruction error: ",
+			vmcs_read32(VM_INSTRUCTION_ERROR));
+		exit_intr_info = 0;
+		exit_qual = 0;
+		goto reflect_vmexit;
+	}
+
+	exit_intr_info = vmx_get_intr_info(vcpu);
+	exit_qual = vmx_get_exit_qual(vcpu);
+
+	trace_kvm_nested_vmexit(kvm_rip_read(vcpu), exit_reason, exit_qual,
+				vmx->idt_vectoring_info, exit_intr_info,
+				vmcs_read32(VM_EXIT_INTR_ERROR_CODE),
+				KVM_ISA_VMX);
+
+	/* If L0 (KVM) wants the exit, it trumps L1's desires. */
+	if (nested_vmx_l0_wants_exit(vcpu, exit_reason))
+		return false;
+
+	/* If L1 doesn't want the exit, handle it in L0. */
+	if (!nested_vmx_l1_wants_exit(vcpu, exit_reason))
+		return false;
+
+	/*
+	 * vmcs.VM_EXIT_INTR_INFO is only valid for EXCEPTION_NMI exits.  For
+	 * EXTERNAL_INTERRUPT, the value for vmcs12->vm_exit_intr_info would
+	 * need to be synthesized by querying the in-kernel LAPIC, but external
+	 * interrupts are never reflected to L1 so it's a non-issue.
+	 */
+	if ((exit_intr_info &
+	     (INTR_INFO_VALID_MASK | INTR_INFO_DELIVER_CODE_MASK)) ==
+	    (INTR_INFO_VALID_MASK | INTR_INFO_DELIVER_CODE_MASK)) {
+		struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+
+		vmcs12->vm_exit_intr_error_code =
+			vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
+	}
+
+reflect_vmexit:
+	nested_vmx_vmexit(vcpu, exit_reason, exit_intr_info, exit_qual);
+	return true;
+}
 
 static int vmx_get_nested_state(struct kvm_vcpu *vcpu,
 				struct kvm_nested_state __user *user_kvm_nested_state,
@@ -6031,7 +6176,7 @@ void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps)
 	 * reason is that if one of these bits is necessary, it will appear
 	 * in vmcs01 and prepare_vmcs02, when it bitwise-or's the control
 	 * fields of vmcs01 and vmcs02, will turn these bits off - and
-	 * nested_vmx_exit_reflected() will not pass related exits to L1.
+	 * nested_vmx_l1_wants_exit() will not pass related exits to L1.
 	 * These rules have exceptions below.
 	 */
 
@@ -6296,12 +6441,14 @@ __init int nested_vmx_hardware_setup(struct kvm_x86_ops *ops,
 	exit_handlers[EXIT_REASON_INVVPID]	= handle_invvpid;
 	exit_handlers[EXIT_REASON_VMFUNC]	= handle_vmfunc;
 
-	ops->check_nested_events = vmx_check_nested_events;
-	ops->get_nested_state = vmx_get_nested_state;
-	ops->set_nested_state = vmx_set_nested_state;
-	ops->get_vmcs12_pages = nested_get_vmcs12_pages;
-	ops->nested_enable_evmcs = nested_enable_evmcs;
-	ops->nested_get_evmcs_version = nested_get_evmcs_version;
-
 	return 0;
 }
+
+struct kvm_x86_nested_ops vmx_nested_ops = {
+	.check_events = vmx_check_nested_events,
+	.get_state = vmx_get_nested_state,
+	.set_state = vmx_set_nested_state,
+	.get_vmcs12_pages = nested_get_vmcs12_pages,
+	.enable_evmcs = nested_enable_evmcs,
+	.get_evmcs_version = nested_get_evmcs_version,
+};
diff --git a/arch/x86/kvm/vmx/nested.h b/arch/x86/kvm/vmx/nested.h
index ac56aefa49e3..7ce9572c3d3a 100644
--- a/arch/x86/kvm/vmx/nested.h
+++ b/arch/x86/kvm/vmx/nested.h
@@ -25,8 +25,8 @@ void nested_vmx_set_vmcs_shadowing_bitmap(void);
 void nested_vmx_free_vcpu(struct kvm_vcpu *vcpu);
 enum nvmx_vmentry_status nested_vmx_enter_non_root_mode(struct kvm_vcpu *vcpu,
 						     bool from_vmentry);
-bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason);
-void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
+bool nested_vmx_reflect_vmexit(struct kvm_vcpu *vcpu);
+void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 vm_exit_reason,
 		       u32 exit_intr_info, unsigned long exit_qualification);
 void nested_sync_vmcs12_to_shadow(struct kvm_vcpu *vcpu);
 int vmx_set_vmx_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
@@ -62,6 +62,13 @@ static inline int vmx_has_valid_vmcs12(struct kvm_vcpu *vcpu)
 		vmx->nested.hv_evmcs;
 }
 
+static inline u16 nested_get_vpid02(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	return vmx->nested.vpid02 ? vmx->nested.vpid02 : vmx->vpid;
+}
+
 static inline unsigned long nested_ept_get_eptp(struct kvm_vcpu *vcpu)
 {
 	/* return the page table to be shadowed - in our case, EPT12 */
@@ -73,34 +80,6 @@ static inline bool nested_ept_ad_enabled(struct kvm_vcpu *vcpu)
 	return nested_ept_get_eptp(vcpu) & VMX_EPTP_AD_ENABLE_BIT;
 }
 
-/*
- * Reflect a VM Exit into L1.
- */
-static inline int nested_vmx_reflect_vmexit(struct kvm_vcpu *vcpu,
-					    u32 exit_reason)
-{
-	u32 exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
-
-	/*
-	 * At this point, the exit interruption info in exit_intr_info
-	 * is only valid for EXCEPTION_NMI exits.  For EXTERNAL_INTERRUPT
-	 * we need to query the in-kernel LAPIC.
-	 */
-	WARN_ON(exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT);
-	if ((exit_intr_info &
-	     (INTR_INFO_VALID_MASK | INTR_INFO_DELIVER_CODE_MASK)) ==
-	    (INTR_INFO_VALID_MASK | INTR_INFO_DELIVER_CODE_MASK)) {
-		struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
-
-		vmcs12->vm_exit_intr_error_code =
-			vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
-	}
-
-	nested_vmx_vmexit(vcpu, exit_reason, exit_intr_info,
-			  vmcs_readl(EXIT_QUALIFICATION));
-	return 1;
-}
-
 /*
  * Return the cr0 value that a nested guest would read. This is a combination
  * of the real cr0 used to run the guest (guest_cr0), and the bits shadowed by
@@ -299,4 +278,6 @@ static inline bool nested_cr4_valid(struct kvm_vcpu *vcpu, unsigned long val)
 #define nested_guest_cr4_valid	nested_cr4_valid
 #define nested_host_cr4_valid	nested_cr4_valid
 
+extern struct kvm_x86_nested_ops vmx_nested_ops;
+
 #endif /* __KVM_X86_VMX_NESTED_H */
diff --git a/arch/x86/kvm/vmx/ops.h b/arch/x86/kvm/vmx/ops.h
index 19717d0a1100..5f1ac002b4b6 100644
--- a/arch/x86/kvm/vmx/ops.h
+++ b/arch/x86/kvm/vmx/ops.h
@@ -268,42 +268,38 @@ static inline void __invept(unsigned long ext, u64 eptp, gpa_t gpa)
 	vmx_asm2(invept, "r"(ext), "m"(operand), ext, eptp, gpa);
 }
 
-static inline bool vpid_sync_vcpu_addr(int vpid, gva_t addr)
-{
-	if (vpid == 0)
-		return true;
-
-	if (cpu_has_vmx_invvpid_individual_addr()) {
-		__invvpid(VMX_VPID_EXTENT_INDIVIDUAL_ADDR, vpid, addr);
-		return true;
-	}
-
-	return false;
-}
-
 static inline void vpid_sync_vcpu_single(int vpid)
 {
 	if (vpid == 0)
 		return;
 
-	if (cpu_has_vmx_invvpid_single())
-		__invvpid(VMX_VPID_EXTENT_SINGLE_CONTEXT, vpid, 0);
+	__invvpid(VMX_VPID_EXTENT_SINGLE_CONTEXT, vpid, 0);
 }
 
 static inline void vpid_sync_vcpu_global(void)
 {
-	if (cpu_has_vmx_invvpid_global())
-		__invvpid(VMX_VPID_EXTENT_ALL_CONTEXT, 0, 0);
+	__invvpid(VMX_VPID_EXTENT_ALL_CONTEXT, 0, 0);
 }
 
 static inline void vpid_sync_context(int vpid)
 {
 	if (cpu_has_vmx_invvpid_single())
 		vpid_sync_vcpu_single(vpid);
-	else
+	else if (vpid != 0)
 		vpid_sync_vcpu_global();
 }
 
+static inline void vpid_sync_vcpu_addr(int vpid, gva_t addr)
+{
+	if (vpid == 0)
+		return;
+
+	if (cpu_has_vmx_invvpid_individual_addr())
+		__invvpid(VMX_VPID_EXTENT_INDIVIDUAL_ADDR, vpid, addr);
+	else
+		vpid_sync_context(vpid);
+}
+
 static inline void ept_sync_global(void)
 {
 	__invept(VMX_EPT_EXTENT_GLOBAL, 0, 0);
diff --git a/arch/x86/kvm/vmx/vmcs.h b/arch/x86/kvm/vmx/vmcs.h
index 481ad879197b..5c0ff80b85c0 100644
--- a/arch/x86/kvm/vmx/vmcs.h
+++ b/arch/x86/kvm/vmx/vmcs.h
@@ -19,7 +19,7 @@ struct vmcs_hdr {
 struct vmcs {
 	struct vmcs_hdr hdr;
 	u32 abort;
-	char data[0];
+	char data[];
 };
 
 DECLARE_PER_CPU(struct vmcs *, current_vmcs);
diff --git a/arch/x86/kvm/vmx/vmcs12.c b/arch/x86/kvm/vmx/vmcs12.c
index 53dfb401316d..c8e51c004f78 100644
--- a/arch/x86/kvm/vmx/vmcs12.c
+++ b/arch/x86/kvm/vmx/vmcs12.c
@@ -115,10 +115,6 @@ const unsigned short vmcs_field_to_offset_table[] = {
 	FIELD(CR4_GUEST_HOST_MASK, cr4_guest_host_mask),
 	FIELD(CR0_READ_SHADOW, cr0_read_shadow),
 	FIELD(CR4_READ_SHADOW, cr4_read_shadow),
-	FIELD(CR3_TARGET_VALUE0, cr3_target_value0),
-	FIELD(CR3_TARGET_VALUE1, cr3_target_value1),
-	FIELD(CR3_TARGET_VALUE2, cr3_target_value2),
-	FIELD(CR3_TARGET_VALUE3, cr3_target_value3),
 	FIELD(EXIT_QUALIFICATION, exit_qualification),
 	FIELD(GUEST_LINEAR_ADDRESS, guest_linear_address),
 	FIELD(GUEST_CR0, guest_cr0),
diff --git a/arch/x86/kvm/vmx/vmcs12.h b/arch/x86/kvm/vmx/vmcs12.h
index d0c6df373f67..80232daf00ff 100644
--- a/arch/x86/kvm/vmx/vmcs12.h
+++ b/arch/x86/kvm/vmx/vmcs12.h
@@ -80,10 +80,7 @@ struct __packed vmcs12 {
 	natural_width cr4_guest_host_mask;
 	natural_width cr0_read_shadow;
 	natural_width cr4_read_shadow;
-	natural_width cr3_target_value0;
-	natural_width cr3_target_value1;
-	natural_width cr3_target_value2;
-	natural_width cr3_target_value3;
+	natural_width dead_space[4]; /* Last remnants of cr3_target_value[0-3]. */
 	natural_width exit_qualification;
 	natural_width guest_linear_address;
 	natural_width guest_cr0;
@@ -263,10 +260,7 @@ static inline void vmx_check_vmcs12_offsets(void)
 	CHECK_OFFSET(cr4_guest_host_mask, 352);
 	CHECK_OFFSET(cr0_read_shadow, 360);
 	CHECK_OFFSET(cr4_read_shadow, 368);
-	CHECK_OFFSET(cr3_target_value0, 376);
-	CHECK_OFFSET(cr3_target_value1, 384);
-	CHECK_OFFSET(cr3_target_value2, 392);
-	CHECK_OFFSET(cr3_target_value3, 400);
+	CHECK_OFFSET(dead_space, 376);
 	CHECK_OFFSET(exit_qualification, 408);
 	CHECK_OFFSET(guest_linear_address, 416);
 	CHECK_OFFSET(guest_cr0, 424);
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index c2c6335a998c..00d31a5e0089 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -437,6 +437,11 @@ static const struct kvm_vmx_segment_field {
 	VMX_SEGMENT_FIELD(LDTR),
 };
 
+static inline void vmx_segment_cache_clear(struct vcpu_vmx *vmx)
+{
+	vmx->segment_cache.bitmask = 0;
+}
+
 static unsigned long host_idt_base;
 
 /*
@@ -1338,6 +1343,10 @@ void vmx_vcpu_load_vmcs(struct kvm_vcpu *vcpu, int cpu)
 		void *gdt = get_current_gdt_ro();
 		unsigned long sysenter_esp;
 
+		/*
+		 * Flush all EPTP/VPID contexts, the new pCPU may have stale
+		 * TLB entries from its previous association with the vCPU.
+		 */
 		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
 
 		/*
@@ -2838,18 +2847,64 @@ static void exit_lmode(struct kvm_vcpu *vcpu)
 
 #endif
 
-static void vmx_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t addr)
+static void vmx_flush_tlb_all(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	/*
+	 * INVEPT must be issued when EPT is enabled, irrespective of VPID, as
+	 * the CPU is not required to invalidate guest-physical mappings on
+	 * VM-Entry, even if VPID is disabled.  Guest-physical mappings are
+	 * associated with the root EPT structure and not any particular VPID
+	 * (INVVPID also isn't required to invalidate guest-physical mappings).
+	 */
+	if (enable_ept) {
+		ept_sync_global();
+	} else if (enable_vpid) {
+		if (cpu_has_vmx_invvpid_global()) {
+			vpid_sync_vcpu_global();
+		} else {
+			vpid_sync_vcpu_single(vmx->vpid);
+			vpid_sync_vcpu_single(vmx->nested.vpid02);
+		}
+	}
+}
+
+static void vmx_flush_tlb_current(struct kvm_vcpu *vcpu)
 {
-	int vpid = to_vmx(vcpu)->vpid;
+	u64 root_hpa = vcpu->arch.mmu->root_hpa;
+
+	/* No flush required if the current context is invalid. */
+	if (!VALID_PAGE(root_hpa))
+		return;
+
+	if (enable_ept)
+		ept_sync_context(construct_eptp(vcpu, root_hpa));
+	else if (!is_guest_mode(vcpu))
+		vpid_sync_context(to_vmx(vcpu)->vpid);
+	else
+		vpid_sync_context(nested_get_vpid02(vcpu));
+}
 
-	if (!vpid_sync_vcpu_addr(vpid, addr))
-		vpid_sync_context(vpid);
+static void vmx_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t addr)
+{
+	/*
+	 * vpid_sync_vcpu_addr() is a nop if vmx->vpid==0, see the comment in
+	 * vmx_flush_tlb_guest() for an explanation of why this is ok.
+	 */
+	vpid_sync_vcpu_addr(to_vmx(vcpu)->vpid, addr);
+}
 
+static void vmx_flush_tlb_guest(struct kvm_vcpu *vcpu)
+{
 	/*
-	 * If VPIDs are not supported or enabled, then the above is a no-op.
-	 * But we don't really need a TLB flush in that case anyway, because
-	 * each VM entry/exit includes an implicit flush when VPID is 0.
+	 * vpid_sync_context() is a nop if vmx->vpid==0, e.g. if enable_vpid==0
+	 * or a vpid couldn't be allocated for this vCPU.  VM-Enter and VM-Exit
+	 * are required to flush GVA->{G,H}PA mappings from the TLB if vpid is
+	 * disabled (VM-Enter with vpid enabled and vpid==0 is disallowed),
+	 * i.e. no explicit INVVPID is necessary.
 	 */
+	vpid_sync_context(to_vmx(vcpu)->vpid);
 }
 
 static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu)
@@ -2887,12 +2942,13 @@ void ept_save_pdptrs(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu *mmu = vcpu->arch.walk_mmu;
 
-	if (is_pae_paging(vcpu)) {
-		mmu->pdptrs[0] = vmcs_read64(GUEST_PDPTR0);
-		mmu->pdptrs[1] = vmcs_read64(GUEST_PDPTR1);
-		mmu->pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
-		mmu->pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
-	}
+	if (WARN_ON_ONCE(!is_pae_paging(vcpu)))
+		return;
+
+	mmu->pdptrs[0] = vmcs_read64(GUEST_PDPTR0);
+	mmu->pdptrs[1] = vmcs_read64(GUEST_PDPTR1);
+	mmu->pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
+	mmu->pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
 
 	kvm_register_mark_dirty(vcpu, VCPU_EXREG_PDPTR);
 }
@@ -2984,16 +3040,15 @@ u64 construct_eptp(struct kvm_vcpu *vcpu, unsigned long root_hpa)
 	return eptp;
 }
 
-void vmx_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long cr3)
+void vmx_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long pgd)
 {
 	struct kvm *kvm = vcpu->kvm;
 	bool update_guest_cr3 = true;
 	unsigned long guest_cr3;
 	u64 eptp;
 
-	guest_cr3 = cr3;
 	if (enable_ept) {
-		eptp = construct_eptp(vcpu, cr3);
+		eptp = construct_eptp(vcpu, pgd);
 		vmcs_write64(EPT_POINTER, eptp);
 
 		if (kvm_x86_ops.tlb_remote_flush) {
@@ -3014,6 +3069,8 @@ void vmx_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long cr3)
 		else /* vmcs01.GUEST_CR3 is already up-to-date. */
 			update_guest_cr3 = false;
 		ept_load_pdptrs(vcpu);
+	} else {
+		guest_cr3 = pgd;
 	}
 
 	if (update_guest_cr3)
@@ -4661,7 +4718,7 @@ static int handle_exception_nmi(struct kvm_vcpu *vcpu)
 	}
 
 	if (is_page_fault(intr_info)) {
-		cr2 = vmcs_readl(EXIT_QUALIFICATION);
+		cr2 = vmx_get_exit_qual(vcpu);
 		/* EPT won't cause page fault directly */
 		WARN_ON_ONCE(!vcpu->arch.apf.host_apf_reason && enable_ept);
 		return kvm_handle_page_fault(vcpu, error_code, cr2, NULL, 0);
@@ -4674,7 +4731,7 @@ static int handle_exception_nmi(struct kvm_vcpu *vcpu)
 
 	switch (ex_no) {
 	case DB_VECTOR:
-		dr6 = vmcs_readl(EXIT_QUALIFICATION);
+		dr6 = vmx_get_exit_qual(vcpu);
 		if (!(vcpu->guest_debug &
 		      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
 			vcpu->arch.dr6 &= ~DR_TRAP_BITS;
@@ -4743,7 +4800,7 @@ static int handle_io(struct kvm_vcpu *vcpu)
 	int size, in, string;
 	unsigned port;
 
-	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	exit_qualification = vmx_get_exit_qual(vcpu);
 	string = (exit_qualification & 16) != 0;
 
 	++vcpu->stat.io_exits;
@@ -4834,7 +4891,7 @@ static int handle_cr(struct kvm_vcpu *vcpu)
 	int err;
 	int ret;
 
-	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	exit_qualification = vmx_get_exit_qual(vcpu);
 	cr = exit_qualification & 15;
 	reg = (exit_qualification >> 8) & 15;
 	switch ((exit_qualification >> 4) & 3) {
@@ -4911,7 +4968,7 @@ static int handle_dr(struct kvm_vcpu *vcpu)
 	unsigned long exit_qualification;
 	int dr, dr7, reg;
 
-	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	exit_qualification = vmx_get_exit_qual(vcpu);
 	dr = exit_qualification & DEBUG_REG_ACCESS_NUM;
 
 	/* First, if DR does not exist, trigger UD */
@@ -5024,7 +5081,7 @@ static int handle_invd(struct kvm_vcpu *vcpu)
 
 static int handle_invlpg(struct kvm_vcpu *vcpu)
 {
-	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	unsigned long exit_qualification = vmx_get_exit_qual(vcpu);
 
 	kvm_mmu_invlpg(vcpu, exit_qualification);
 	return kvm_skip_emulated_instruction(vcpu);
@@ -5056,7 +5113,7 @@ static int handle_xsetbv(struct kvm_vcpu *vcpu)
 static int handle_apic_access(struct kvm_vcpu *vcpu)
 {
 	if (likely(fasteoi)) {
-		unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+		unsigned long exit_qualification = vmx_get_exit_qual(vcpu);
 		int access_type, offset;
 
 		access_type = exit_qualification & APIC_ACCESS_TYPE;
@@ -5077,7 +5134,7 @@ static int handle_apic_access(struct kvm_vcpu *vcpu)
 
 static int handle_apic_eoi_induced(struct kvm_vcpu *vcpu)
 {
-	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	unsigned long exit_qualification = vmx_get_exit_qual(vcpu);
 	int vector = exit_qualification & 0xff;
 
 	/* EOI-induced VM exit is trap-like and thus no need to adjust IP */
@@ -5087,7 +5144,7 @@ static int handle_apic_eoi_induced(struct kvm_vcpu *vcpu)
 
 static int handle_apic_write(struct kvm_vcpu *vcpu)
 {
-	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	unsigned long exit_qualification = vmx_get_exit_qual(vcpu);
 	u32 offset = exit_qualification & 0xfff;
 
 	/* APIC-write VM exit is trap-like and thus no need to adjust IP */
@@ -5108,7 +5165,7 @@ static int handle_task_switch(struct kvm_vcpu *vcpu)
 	idt_index = (vmx->idt_vectoring_info & VECTORING_INFO_VECTOR_MASK);
 	type = (vmx->idt_vectoring_info & VECTORING_INFO_TYPE_MASK);
 
-	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	exit_qualification = vmx_get_exit_qual(vcpu);
 
 	reason = (u32)exit_qualification >> 30;
 	if (reason == TASK_SWITCH_GATE && idt_v) {
@@ -5158,7 +5215,7 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu)
 	gpa_t gpa;
 	u64 error_code;
 
-	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	exit_qualification = vmx_get_exit_qual(vcpu);
 
 	/*
 	 * EPT violation happened while executing iret from NMI,
@@ -5418,13 +5475,13 @@ static int handle_invpcid(struct kvm_vcpu *vcpu)
 	/* According to the Intel instruction reference, the memory operand
 	 * is read even if it isn't needed (e.g., for type==all)
 	 */
-	if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION),
+	if (get_vmx_mem_address(vcpu, vmx_get_exit_qual(vcpu),
 				vmx_instruction_info, false,
 				sizeof(operand), &gva))
 		return 1;
 
 	if (kvm_read_guest_virt(vcpu, gva, &operand, sizeof(operand), &e)) {
-		kvm_inject_page_fault(vcpu, &e);
+		kvm_inject_emulated_page_fault(vcpu, &e);
 		return 1;
 	}
 
@@ -5453,11 +5510,11 @@ static int handle_invpcid(struct kvm_vcpu *vcpu)
 
 		if (kvm_get_active_pcid(vcpu) == operand.pcid) {
 			kvm_mmu_sync_roots(vcpu);
-			kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
+			kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
 		}
 
 		for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
-			if (kvm_get_pcid(vcpu, vcpu->arch.mmu->prev_roots[i].cr3)
+			if (kvm_get_pcid(vcpu, vcpu->arch.mmu->prev_roots[i].pgd)
 			    == operand.pcid)
 				roots_to_free |= KVM_MMU_ROOT_PREVIOUS(i);
 
@@ -5494,7 +5551,7 @@ static int handle_pml_full(struct kvm_vcpu *vcpu)
 
 	trace_kvm_pml_full(vcpu->vcpu_id);
 
-	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	exit_qualification = vmx_get_exit_qual(vcpu);
 
 	/*
 	 * PML buffer FULL happened while executing iret from NMI,
@@ -5608,8 +5665,8 @@ static const int kvm_vmx_max_exit_handlers =
 
 static void vmx_get_exit_info(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2)
 {
-	*info1 = vmcs_readl(EXIT_QUALIFICATION);
-	*info2 = vmcs_read32(VM_EXIT_INTR_INFO);
+	*info1 = vmx_get_exit_qual(vcpu);
+	*info2 = vmx_get_intr_info(vcpu);
 }
 
 static void vmx_destroy_pml_buffer(struct vcpu_vmx *vmx)
@@ -5691,7 +5748,6 @@ void dump_vmcs(void)
 	u32 cpu_based_exec_ctrl, pin_based_exec_ctrl, secondary_exec_control;
 	unsigned long cr4;
 	u64 efer;
-	int i, n;
 
 	if (!dump_invalid_vmcs) {
 		pr_warn_ratelimited("set kvm_intel.dump_invalid_vmcs=1 to dump internal KVM state.\n");
@@ -5828,14 +5884,6 @@ void dump_vmcs(void)
 		pr_err("PostedIntrVec = 0x%02x\n", vmcs_read16(POSTED_INTR_NV));
 	if ((secondary_exec_control & SECONDARY_EXEC_ENABLE_EPT))
 		pr_err("EPT pointer = 0x%016llx\n", vmcs_read64(EPT_POINTER));
-	n = vmcs_read32(CR3_TARGET_COUNT);
-	for (i = 0; i + 1 < n; i += 4)
-		pr_err("CR3 target%u=%016lx target%u=%016lx\n",
-		       i, vmcs_readl(CR3_TARGET_VALUE0 + i * 2),
-		       i + 1, vmcs_readl(CR3_TARGET_VALUE0 + i * 2 + 2));
-	if (i < n)
-		pr_err("CR3 target%u=%016lx\n",
-		       i, vmcs_readl(CR3_TARGET_VALUE0 + i * 2));
 	if (secondary_exec_control & SECONDARY_EXEC_PAUSE_LOOP_EXITING)
 		pr_err("PLE Gap=%08x Window=%08x\n",
 		       vmcs_read32(PLE_GAP), vmcs_read32(PLE_WINDOW));
@@ -5885,8 +5933,8 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu,
 		 */
 		nested_mark_vmcs12_pages_dirty(vcpu);
 
-		if (nested_vmx_exit_reflected(vcpu, exit_reason))
-			return nested_vmx_reflect_vmexit(vcpu, exit_reason);
+		if (nested_vmx_reflect_vmexit(vcpu))
+			return 1;
 	}
 
 	if (exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY) {
@@ -6107,7 +6155,15 @@ void vmx_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
 		if (flexpriority_enabled) {
 			sec_exec_control |=
 				SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
-			vmx_flush_tlb(vcpu, true);
+			kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
+
+			/*
+			 * Flush the TLB, reloading the APIC access page will
+			 * only do so if its physical address has changed, but
+			 * the guest may have inserted a non-APIC mapping into
+			 * the TLB while the APIC access page was disabled.
+			 */
+			kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
 		}
 		break;
 	case LAPIC_MODE_X2APIC:
@@ -6121,12 +6177,32 @@ void vmx_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
 	vmx_update_msr_bitmap(vcpu);
 }
 
-static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu, hpa_t hpa)
+static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu)
 {
-	if (!is_guest_mode(vcpu)) {
-		vmcs_write64(APIC_ACCESS_ADDR, hpa);
-		vmx_flush_tlb(vcpu, true);
+	struct page *page;
+
+	/* Defer reload until vmcs01 is the current VMCS. */
+	if (is_guest_mode(vcpu)) {
+		to_vmx(vcpu)->nested.reload_vmcs01_apic_access_page = true;
+		return;
 	}
+
+	if (!(secondary_exec_controls_get(to_vmx(vcpu)) &
+	    SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES))
+		return;
+
+	page = gfn_to_page(vcpu->kvm, APIC_DEFAULT_PHYS_BASE >> PAGE_SHIFT);
+	if (is_error_page(page))
+		return;
+
+	vmcs_write64(APIC_ACCESS_ADDR, page_to_phys(page));
+	vmx_flush_tlb_current(vcpu);
+
+	/*
+	 * Do not pin apic access page in memory, the MMU notifier
+	 * will call us again if it is migrated or swapped out.
+	 */
+	put_page(page);
 }
 
 static void vmx_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr)
@@ -6244,16 +6320,16 @@ static void vmx_apicv_post_state_restore(struct kvm_vcpu *vcpu)
 
 static void handle_exception_nmi_irqoff(struct vcpu_vmx *vmx)
 {
-	vmx->exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+	u32 intr_info = vmx_get_intr_info(&vmx->vcpu);
 
 	/* if exit due to PF check for async PF */
-	if (is_page_fault(vmx->exit_intr_info)) {
+	if (is_page_fault(intr_info)) {
 		vmx->vcpu.arch.apf.host_apf_reason = kvm_read_and_reset_pf_reason();
 	/* Handle machine checks before interrupts are enabled */
-	} else if (is_machine_check(vmx->exit_intr_info)) {
+	} else if (is_machine_check(intr_info)) {
 		kvm_machine_check();
 	/* We need to handle NMIs before interrupts are enabled */
-	} else if (is_nmi(vmx->exit_intr_info)) {
+	} else if (is_nmi(intr_info)) {
 		kvm_before_interrupt(&vmx->vcpu);
 		asm("int $2");
 		kvm_after_interrupt(&vmx->vcpu);
@@ -6268,9 +6344,8 @@ static void handle_external_interrupt_irqoff(struct kvm_vcpu *vcpu)
 	unsigned long tmp;
 #endif
 	gate_desc *desc;
-	u32 intr_info;
+	u32 intr_info = vmx_get_intr_info(vcpu);
 
-	intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
 	if (WARN_ONCE(!is_external_intr(intr_info),
 	    "KVM: unexpected VM-Exit interrupt info: 0x%x", intr_info))
 		return;
@@ -6306,8 +6381,7 @@ static void handle_external_interrupt_irqoff(struct kvm_vcpu *vcpu)
 }
 STACK_FRAME_NON_STANDARD(handle_external_interrupt_irqoff);
 
-static void vmx_handle_exit_irqoff(struct kvm_vcpu *vcpu,
-	enum exit_fastpath_completion *exit_fastpath)
+static void vmx_handle_exit_irqoff(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
@@ -6315,9 +6389,6 @@ static void vmx_handle_exit_irqoff(struct kvm_vcpu *vcpu,
 		handle_external_interrupt_irqoff(vcpu);
 	else if (vmx->exit_reason == EXIT_REASON_EXCEPTION_NMI)
 		handle_exception_nmi_irqoff(vmx);
-	else if (!is_guest_mode(vcpu) &&
-		vmx->exit_reason == EXIT_REASON_MSR_WRITE)
-		*exit_fastpath = handle_fastpath_set_msr_irqoff(vcpu);
 }
 
 static bool vmx_has_emulated_msr(int index)
@@ -6351,11 +6422,8 @@ static void vmx_recover_nmi_blocking(struct vcpu_vmx *vmx)
 	if (enable_vnmi) {
 		if (vmx->loaded_vmcs->nmi_known_unmasked)
 			return;
-		/*
-		 * Can't use vmx->exit_intr_info since we're not sure what
-		 * the exit reason is.
-		 */
-		exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+
+		exit_intr_info = vmx_get_intr_info(&vmx->vcpu);
 		unblock_nmi = (exit_intr_info & INTR_INFO_UNBLOCK_NMI) != 0;
 		vector = exit_intr_info & INTR_INFO_VECTOR_MASK;
 		/*
@@ -6524,8 +6592,9 @@ void vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp)
 
 bool __vmx_vcpu_run(struct vcpu_vmx *vmx, unsigned long *regs, bool launched);
 
-static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
+static enum exit_fastpath_completion vmx_vcpu_run(struct kvm_vcpu *vcpu)
 {
+	enum exit_fastpath_completion exit_fastpath;
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	unsigned long cr3, cr4;
 
@@ -6537,7 +6606,7 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	/* Don't enter VMX if guest state is invalid, let the exit handler
 	   start emulation until we arrive back to a valid state */
 	if (vmx->emulation_required)
-		return;
+		return EXIT_FASTPATH_NONE;
 
 	if (vmx->ple_window_dirty) {
 		vmx->ple_window_dirty = false;
@@ -6662,12 +6731,7 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	loadsegment(es, __USER_DS);
 #endif
 
-	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP)
-				  | (1 << VCPU_EXREG_RFLAGS)
-				  | (1 << VCPU_EXREG_PDPTR)
-				  | (1 << VCPU_EXREG_SEGMENTS)
-				  | (1 << VCPU_EXREG_CR3));
-	vcpu->arch.regs_dirty = 0;
+	vmx_register_cache_reset(vcpu);
 
 	pt_guest_exit(vmx);
 
@@ -6688,18 +6752,30 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	vmx->nested.nested_run_pending = 0;
 	vmx->idt_vectoring_info = 0;
 
-	vmx->exit_reason = vmx->fail ? 0xdead : vmcs_read32(VM_EXIT_REASON);
-	if ((u16)vmx->exit_reason == EXIT_REASON_MCE_DURING_VMENTRY)
+	if (unlikely(vmx->fail)) {
+		vmx->exit_reason = 0xdead;
+		return EXIT_FASTPATH_NONE;
+	}
+
+	vmx->exit_reason = vmcs_read32(VM_EXIT_REASON);
+	if (unlikely((u16)vmx->exit_reason == EXIT_REASON_MCE_DURING_VMENTRY))
 		kvm_machine_check();
 
-	if (vmx->fail || (vmx->exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY))
-		return;
+	if (unlikely(vmx->exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY))
+		return EXIT_FASTPATH_NONE;
+
+	if (!is_guest_mode(vcpu) && vmx->exit_reason == EXIT_REASON_MSR_WRITE)
+		exit_fastpath = handle_fastpath_set_msr_irqoff(vcpu);
+	else
+		exit_fastpath = EXIT_FASTPATH_NONE;
 
 	vmx->loaded_vmcs->launched = 1;
 	vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
 
 	vmx_recover_nmi_blocking(vmx);
 	vmx_complete_interrupts(vmx);
+
+	return exit_fastpath;
 }
 
 static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
@@ -7748,8 +7824,10 @@ static struct kvm_x86_ops vmx_x86_ops __initdata = {
 	.get_rflags = vmx_get_rflags,
 	.set_rflags = vmx_set_rflags,
 
-	.tlb_flush = vmx_flush_tlb,
+	.tlb_flush_all = vmx_flush_tlb_all,
+	.tlb_flush_current = vmx_flush_tlb_current,
 	.tlb_flush_gva = vmx_flush_tlb_gva,
+	.tlb_flush_guest = vmx_flush_tlb_guest,
 
 	.run = vmx_vcpu_run,
 	.handle_exit = vmx_handle_exit,
@@ -7815,6 +7893,7 @@ static struct kvm_x86_ops vmx_x86_ops __initdata = {
 	.post_block = vmx_post_block,
 
 	.pmu_ops = &intel_pmu_ops,
+	.nested_ops = &vmx_nested_ops,
 
 	.update_pi_irte = vmx_update_pi_irte,
 
@@ -7830,12 +7909,6 @@ static struct kvm_x86_ops vmx_x86_ops __initdata = {
 	.pre_leave_smm = vmx_pre_leave_smm,
 	.enable_smi_window = enable_smi_window,
 
-	.check_nested_events = NULL,
-	.get_nested_state = NULL,
-	.set_nested_state = NULL,
-	.get_vmcs12_pages = NULL,
-	.nested_enable_evmcs = NULL,
-	.nested_get_evmcs_version = NULL,
 	.need_emulation_on_page_fault = vmx_need_emulation_on_page_fault,
 	.apic_init_signal_blocked = vmx_apic_init_signal_blocked,
 };
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index aab9df55336e..edfb739e5907 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -8,6 +8,7 @@
 #include <asm/intel_pt.h>
 
 #include "capabilities.h"
+#include "kvm_cache_regs.h"
 #include "ops.h"
 #include "vmcs.h"
 
@@ -136,6 +137,7 @@ struct nested_vmx {
 	bool vmcs02_initialized;
 
 	bool change_vmcs01_virtual_apic_mode;
+	bool reload_vmcs01_apic_access_page;
 
 	/*
 	 * Enlightened VMCS has been enabled. It does not mean that L1 has to
@@ -208,6 +210,7 @@ struct vcpu_vmx {
 	 */
 	bool		      guest_state_loaded;
 
+	unsigned long         exit_qualification;
 	u32                   exit_intr_info;
 	u32                   idt_vectoring_info;
 	ulong                 rflags;
@@ -441,9 +444,16 @@ BUILD_CONTROLS_SHADOW(pin, PIN_BASED_VM_EXEC_CONTROL)
 BUILD_CONTROLS_SHADOW(exec, CPU_BASED_VM_EXEC_CONTROL)
 BUILD_CONTROLS_SHADOW(secondary_exec, SECONDARY_VM_EXEC_CONTROL)
 
-static inline void vmx_segment_cache_clear(struct vcpu_vmx *vmx)
+static inline void vmx_register_cache_reset(struct kvm_vcpu *vcpu)
 {
-	vmx->segment_cache.bitmask = 0;
+	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP)
+				  | (1 << VCPU_EXREG_RFLAGS)
+				  | (1 << VCPU_EXREG_PDPTR)
+				  | (1 << VCPU_EXREG_SEGMENTS)
+				  | (1 << VCPU_EXREG_CR3)
+				  | (1 << VCPU_EXREG_EXIT_INFO_1)
+				  | (1 << VCPU_EXREG_EXIT_INFO_2));
+	vcpu->arch.regs_dirty = 0;
 }
 
 static inline u32 vmx_vmentry_ctrl(void)
@@ -486,6 +496,28 @@ static inline struct pi_desc *vcpu_to_pi_desc(struct kvm_vcpu *vcpu)
 	return &(to_vmx(vcpu)->pi_desc);
 }
 
+static inline unsigned long vmx_get_exit_qual(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	if (!kvm_register_is_available(vcpu, VCPU_EXREG_EXIT_INFO_1)) {
+		kvm_register_mark_available(vcpu, VCPU_EXREG_EXIT_INFO_1);
+		vmx->exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	}
+	return vmx->exit_qualification;
+}
+
+static inline u32 vmx_get_intr_info(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	if (!kvm_register_is_available(vcpu, VCPU_EXREG_EXIT_INFO_2)) {
+		kvm_register_mark_available(vcpu, VCPU_EXREG_EXIT_INFO_2);
+		vmx->exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+	}
+	return vmx->exit_intr_info;
+}
+
 struct vmcs *alloc_vmcs_cpu(bool shadow, int cpu, gfp_t flags);
 void free_vmcs(struct vmcs *vmcs);
 int alloc_loaded_vmcs(struct loaded_vmcs *loaded_vmcs);
@@ -500,24 +532,6 @@ static inline struct vmcs *alloc_vmcs(bool shadow)
 
 u64 construct_eptp(struct kvm_vcpu *vcpu, unsigned long root_hpa);
 
-static inline void __vmx_flush_tlb(struct kvm_vcpu *vcpu, int vpid,
-				bool invalidate_gpa)
-{
-	if (enable_ept && (invalidate_gpa || !enable_vpid)) {
-		if (!VALID_PAGE(vcpu->arch.mmu->root_hpa))
-			return;
-		ept_sync_context(construct_eptp(vcpu,
-						vcpu->arch.mmu->root_hpa));
-	} else {
-		vpid_sync_context(vpid);
-	}
-}
-
-static inline void vmx_flush_tlb(struct kvm_vcpu *vcpu, bool invalidate_gpa)
-{
-	__vmx_flush_tlb(vcpu, to_vmx(vcpu)->vpid, invalidate_gpa);
-}
-
 static inline void decache_tsc_multiplier(struct vcpu_vmx *vmx)
 {
 	vmx->current_tsc_ratio = vmx->vcpu.arch.tsc_scaling_ratio;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c5835f9cb9ad..b97e001b174f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -97,9 +97,6 @@ static u64 __read_mostly efer_reserved_bits = ~((u64)EFER_SCE);
 
 static u64 __read_mostly cr4_reserved_bits = CR4_RESERVED_BITS;
 
-#define VM_STAT(x, ...) offsetof(struct kvm, stat.x), KVM_STAT_VM, ## __VA_ARGS__
-#define VCPU_STAT(x, ...) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU, ## __VA_ARGS__
-
 #define KVM_X2APIC_API_VALID_FLAGS (KVM_X2APIC_API_USE_32BIT_IDS | \
                                     KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK)
 
@@ -194,45 +191,44 @@ u64 __read_mostly supported_xss;
 EXPORT_SYMBOL_GPL(supported_xss);
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
-	{ "pf_fixed", VCPU_STAT(pf_fixed) },
-	{ "pf_guest", VCPU_STAT(pf_guest) },
-	{ "tlb_flush", VCPU_STAT(tlb_flush) },
-	{ "invlpg", VCPU_STAT(invlpg) },
-	{ "exits", VCPU_STAT(exits) },
-	{ "io_exits", VCPU_STAT(io_exits) },
-	{ "mmio_exits", VCPU_STAT(mmio_exits) },
-	{ "signal_exits", VCPU_STAT(signal_exits) },
-	{ "irq_window", VCPU_STAT(irq_window_exits) },
-	{ "nmi_window", VCPU_STAT(nmi_window_exits) },
-	{ "halt_exits", VCPU_STAT(halt_exits) },
-	{ "halt_successful_poll", VCPU_STAT(halt_successful_poll) },
-	{ "halt_attempted_poll", VCPU_STAT(halt_attempted_poll) },
-	{ "halt_poll_invalid", VCPU_STAT(halt_poll_invalid) },
-	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
-	{ "hypercalls", VCPU_STAT(hypercalls) },
-	{ "request_irq", VCPU_STAT(request_irq_exits) },
-	{ "irq_exits", VCPU_STAT(irq_exits) },
-	{ "host_state_reload", VCPU_STAT(host_state_reload) },
-	{ "fpu_reload", VCPU_STAT(fpu_reload) },
-	{ "insn_emulation", VCPU_STAT(insn_emulation) },
-	{ "insn_emulation_fail", VCPU_STAT(insn_emulation_fail) },
-	{ "irq_injections", VCPU_STAT(irq_injections) },
-	{ "nmi_injections", VCPU_STAT(nmi_injections) },
-	{ "req_event", VCPU_STAT(req_event) },
-	{ "l1d_flush", VCPU_STAT(l1d_flush) },
-	{ "mmu_shadow_zapped", VM_STAT(mmu_shadow_zapped) },
-	{ "mmu_pte_write", VM_STAT(mmu_pte_write) },
-	{ "mmu_pte_updated", VM_STAT(mmu_pte_updated) },
-	{ "mmu_pde_zapped", VM_STAT(mmu_pde_zapped) },
-	{ "mmu_flooded", VM_STAT(mmu_flooded) },
-	{ "mmu_recycled", VM_STAT(mmu_recycled) },
-	{ "mmu_cache_miss", VM_STAT(mmu_cache_miss) },
-	{ "mmu_unsync", VM_STAT(mmu_unsync) },
-	{ "remote_tlb_flush", VM_STAT(remote_tlb_flush) },
-	{ "largepages", VM_STAT(lpages, .mode = 0444) },
-	{ "nx_largepages_splitted", VM_STAT(nx_lpage_splits, .mode = 0444) },
-	{ "max_mmu_page_hash_collisions",
-		VM_STAT(max_mmu_page_hash_collisions) },
+	VCPU_STAT("pf_fixed", pf_fixed),
+	VCPU_STAT("pf_guest", pf_guest),
+	VCPU_STAT("tlb_flush", tlb_flush),
+	VCPU_STAT("invlpg", invlpg),
+	VCPU_STAT("exits", exits),
+	VCPU_STAT("io_exits", io_exits),
+	VCPU_STAT("mmio_exits", mmio_exits),
+	VCPU_STAT("signal_exits", signal_exits),
+	VCPU_STAT("irq_window", irq_window_exits),
+	VCPU_STAT("nmi_window", nmi_window_exits),
+	VCPU_STAT("halt_exits", halt_exits),
+	VCPU_STAT("halt_successful_poll", halt_successful_poll),
+	VCPU_STAT("halt_attempted_poll", halt_attempted_poll),
+	VCPU_STAT("halt_poll_invalid", halt_poll_invalid),
+	VCPU_STAT("halt_wakeup", halt_wakeup),
+	VCPU_STAT("hypercalls", hypercalls),
+	VCPU_STAT("request_irq", request_irq_exits),
+	VCPU_STAT("irq_exits", irq_exits),
+	VCPU_STAT("host_state_reload", host_state_reload),
+	VCPU_STAT("fpu_reload", fpu_reload),
+	VCPU_STAT("insn_emulation", insn_emulation),
+	VCPU_STAT("insn_emulation_fail", insn_emulation_fail),
+	VCPU_STAT("irq_injections", irq_injections),
+	VCPU_STAT("nmi_injections", nmi_injections),
+	VCPU_STAT("req_event", req_event),
+	VCPU_STAT("l1d_flush", l1d_flush),
+	VM_STAT("mmu_shadow_zapped", mmu_shadow_zapped),
+	VM_STAT("mmu_pte_write", mmu_pte_write),
+	VM_STAT("mmu_pte_updated", mmu_pte_updated),
+	VM_STAT("mmu_pde_zapped", mmu_pde_zapped),
+	VM_STAT("mmu_flooded", mmu_flooded),
+	VM_STAT("mmu_recycled", mmu_recycled),
+	VM_STAT("mmu_cache_miss", mmu_cache_miss),
+	VM_STAT("mmu_unsync", mmu_unsync),
+	VM_STAT("remote_tlb_flush", remote_tlb_flush),
+	VM_STAT("largepages", lpages, .mode = 0444),
+	VM_STAT("nx_largepages_splitted", nx_lpage_splits, .mode = 0444),
+	VM_STAT("max_mmu_page_hash_collisions", max_mmu_page_hash_collisions),
 	{ NULL }
 };
 
@@ -611,15 +607,28 @@ void kvm_inject_page_fault(struct kvm_vcpu *vcpu, struct x86_exception *fault)
 }
 EXPORT_SYMBOL_GPL(kvm_inject_page_fault);
 
-static bool kvm_propagate_fault(struct kvm_vcpu *vcpu, struct x86_exception *fault)
+bool kvm_inject_emulated_page_fault(struct kvm_vcpu *vcpu,
+				    struct x86_exception *fault)
 {
-	if (mmu_is_nested(vcpu) && !fault->nested_page_fault)
-		vcpu->arch.nested_mmu.inject_page_fault(vcpu, fault);
-	else
-		vcpu->arch.mmu->inject_page_fault(vcpu, fault);
+	struct kvm_mmu *fault_mmu;
+	WARN_ON_ONCE(fault->vector != PF_VECTOR);
+
+	fault_mmu = fault->nested_page_fault ? vcpu->arch.mmu :
+					       vcpu->arch.walk_mmu;
+
+	/*
+	 * Invalidate the TLB entry for the faulting address, if it exists,
+	 * else the access will fault indefinitely (and to emulate hardware).
+	 */
+	if ((fault->error_code & PFERR_PRESENT_MASK) &&
+	    !(fault->error_code & PFERR_RSVD_MASK))
+		kvm_mmu_invalidate_gva(vcpu, fault_mmu, fault->address,
+				       fault_mmu->root_hpa);
 
+	fault_mmu->inject_page_fault(vcpu, fault);
 	return fault->nested_page_fault;
 }
+EXPORT_SYMBOL_GPL(kvm_inject_emulated_page_fault);
 
 void kvm_inject_nmi(struct kvm_vcpu *vcpu)
 {
@@ -1006,7 +1015,7 @@ int kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 	if (cr3 == kvm_read_cr3(vcpu) && !pdptrs_changed(vcpu)) {
 		if (!skip_tlb_flush) {
 			kvm_mmu_sync_roots(vcpu);
-			kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
+			kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
 		}
 		return 0;
 	}
@@ -1018,7 +1027,7 @@ int kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 		 !load_pdptrs(vcpu, vcpu->arch.walk_mmu, cr3))
 		return 1;
 
-	kvm_mmu_new_cr3(vcpu, cr3, skip_tlb_flush);
+	kvm_mmu_new_pgd(vcpu, cr3, skip_tlb_flush, skip_tlb_flush);
 	vcpu->arch.cr3 = cr3;
 	kvm_register_mark_available(vcpu, VCPU_EXREG_CR3);
 
@@ -2677,10 +2686,16 @@ static void kvmclock_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.time = 0;
 }
 
-static void kvm_vcpu_flush_tlb(struct kvm_vcpu *vcpu, bool invalidate_gpa)
+static void kvm_vcpu_flush_tlb_all(struct kvm_vcpu *vcpu)
 {
 	++vcpu->stat.tlb_flush;
-	kvm_x86_ops.tlb_flush(vcpu, invalidate_gpa);
+	kvm_x86_ops.tlb_flush_all(vcpu);
+}
+
+static void kvm_vcpu_flush_tlb_guest(struct kvm_vcpu *vcpu)
+{
+	++vcpu->stat.tlb_flush;
+	kvm_x86_ops.tlb_flush_guest(vcpu);
 }
 
 static void record_steal_time(struct kvm_vcpu *vcpu)
@@ -2706,7 +2721,7 @@ static void record_steal_time(struct kvm_vcpu *vcpu)
 	trace_kvm_pv_tlb_flush(vcpu->vcpu_id,
 		st->preempted & KVM_VCPU_FLUSH_TLB);
 	if (xchg(&st->preempted, 0) & KVM_VCPU_FLUSH_TLB)
-		kvm_vcpu_flush_tlb(vcpu, false);
+		kvm_vcpu_flush_tlb_guest(vcpu);
 
 	vcpu->arch.st.preempted = 0;
 
@@ -3438,14 +3453,14 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = KVM_X2APIC_API_VALID_FLAGS;
 		break;
 	case KVM_CAP_NESTED_STATE:
-		r = kvm_x86_ops.get_nested_state ?
-			kvm_x86_ops.get_nested_state(NULL, NULL, 0) : 0;
+		r = kvm_x86_ops.nested_ops->get_state ?
+			kvm_x86_ops.nested_ops->get_state(NULL, NULL, 0) : 0;
 		break;
 	case KVM_CAP_HYPERV_DIRECT_TLBFLUSH:
 		r = kvm_x86_ops.enable_direct_tlbflush != NULL;
 		break;
 	case KVM_CAP_HYPERV_ENLIGHTENED_VMCS:
-		r = kvm_x86_ops.nested_enable_evmcs != NULL;
+		r = kvm_x86_ops.nested_ops->enable_evmcs != NULL;
 		break;
 	default:
 		break;
@@ -4231,9 +4246,9 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 		return kvm_hv_activate_synic(vcpu, cap->cap ==
 					     KVM_CAP_HYPERV_SYNIC2);
 	case KVM_CAP_HYPERV_ENLIGHTENED_VMCS:
-		if (!kvm_x86_ops.nested_enable_evmcs)
+		if (!kvm_x86_ops.nested_ops->enable_evmcs)
 			return -ENOTTY;
-		r = kvm_x86_ops.nested_enable_evmcs(vcpu, &vmcs_version);
+		r = kvm_x86_ops.nested_ops->enable_evmcs(vcpu, &vmcs_version);
 		if (!r) {
 			user_ptr = (void __user *)(uintptr_t)cap->args[0];
 			if (copy_to_user(user_ptr, &vmcs_version,
@@ -4548,7 +4563,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		u32 user_data_size;
 
 		r = -EINVAL;
-		if (!kvm_x86_ops.get_nested_state)
+		if (!kvm_x86_ops.nested_ops->get_state)
 			break;
 
 		BUILD_BUG_ON(sizeof(user_data_size) != sizeof(user_kvm_nested_state->size));
@@ -4556,8 +4571,8 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		if (get_user(user_data_size, &user_kvm_nested_state->size))
 			break;
 
-		r = kvm_x86_ops.get_nested_state(vcpu, user_kvm_nested_state,
-						  user_data_size);
+		r = kvm_x86_ops.nested_ops->get_state(vcpu, user_kvm_nested_state,
+						     user_data_size);
 		if (r < 0)
 			break;
 
@@ -4578,7 +4593,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		int idx;
 
 		r = -EINVAL;
-		if (!kvm_x86_ops.set_nested_state)
+		if (!kvm_x86_ops.nested_ops->set_state)
 			break;
 
 		r = -EFAULT;
@@ -4600,7 +4615,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 			break;
 
 		idx = srcu_read_lock(&vcpu->kvm->srcu);
-		r = kvm_x86_ops.set_nested_state(vcpu, user_kvm_nested_state, &kvm_state);
+		r = kvm_x86_ops.nested_ops->set_state(vcpu, user_kvm_nested_state, &kvm_state);
 		srcu_read_unlock(&vcpu->kvm->srcu, idx);
 		break;
 	}
@@ -6408,7 +6423,7 @@ static bool inject_emulated_exception(struct kvm_vcpu *vcpu)
 {
 	struct x86_emulate_ctxt *ctxt = vcpu->arch.emulate_ctxt;
 	if (ctxt->exception.vector == PF_VECTOR)
-		return kvm_propagate_fault(vcpu, &ctxt->exception);
+		return kvm_inject_emulated_page_fault(vcpu, &ctxt->exception);
 
 	if (ctxt->exception.error_code_valid)
 		kvm_queue_exception_e(vcpu, ctxt->exception.vector,
@@ -7711,8 +7726,8 @@ static int inject_pending_event(struct kvm_vcpu *vcpu)
 	 * from L2 to L1 due to pending L1 events which require exit
 	 * from L2 to L1.
 	 */
-	if (is_guest_mode(vcpu) && kvm_x86_ops.check_nested_events) {
-		r = kvm_x86_ops.check_nested_events(vcpu);
+	if (is_guest_mode(vcpu)) {
+		r = kvm_x86_ops.nested_ops->check_events(vcpu);
 		if (r != 0)
 			return r;
 	}
@@ -7773,8 +7788,8 @@ static int inject_pending_event(struct kvm_vcpu *vcpu)
 		 * proposal and current concerns.  Perhaps we should be setting
 		 * KVM_REQ_EVENT only on certain events and not unconditionally?
 		 */
-		if (is_guest_mode(vcpu) && kvm_x86_ops.check_nested_events) {
-			r = kvm_x86_ops.check_nested_events(vcpu);
+		if (is_guest_mode(vcpu)) {
+			r = kvm_x86_ops.nested_ops->check_events(vcpu);
 			if (r != 0)
 				return r;
 		}
@@ -8165,24 +8180,13 @@ int kvm_arch_mmu_notifier_invalidate_range(struct kvm *kvm,
 
 void kvm_vcpu_reload_apic_access_page(struct kvm_vcpu *vcpu)
 {
-	struct page *page = NULL;
-
 	if (!lapic_in_kernel(vcpu))
 		return;
 
 	if (!kvm_x86_ops.set_apic_access_page_addr)
 		return;
 
-	page = gfn_to_page(vcpu->kvm, APIC_DEFAULT_PHYS_BASE >> PAGE_SHIFT);
-	if (is_error_page(page))
-		return;
-	kvm_x86_ops.set_apic_access_page_addr(vcpu, page_to_phys(page));
-
-	/*
-	 * Do not pin apic access page in memory, the MMU notifier
-	 * will call us again if it is migrated or swapped out.
-	 */
-	put_page(page);
+	kvm_x86_ops.set_apic_access_page_addr(vcpu);
 }
 
 void __kvm_request_immediate_exit(struct kvm_vcpu *vcpu)
@@ -8202,13 +8206,13 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	bool req_int_win =
 		dm_request_for_irq_injection(vcpu) &&
 		kvm_cpu_accept_dm_intr(vcpu);
-	enum exit_fastpath_completion exit_fastpath = EXIT_FASTPATH_NONE;
+	enum exit_fastpath_completion exit_fastpath;
 
 	bool req_immediate_exit = false;
 
 	if (kvm_request_pending(vcpu)) {
 		if (kvm_check_request(KVM_REQ_GET_VMCS12_PAGES, vcpu)) {
-			if (unlikely(!kvm_x86_ops.get_vmcs12_pages(vcpu))) {
+			if (unlikely(!kvm_x86_ops.nested_ops->get_vmcs12_pages(vcpu))) {
 				r = 0;
 				goto out;
 			}
@@ -8230,8 +8234,17 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 			kvm_mmu_sync_roots(vcpu);
 		if (kvm_check_request(KVM_REQ_LOAD_MMU_PGD, vcpu))
 			kvm_mmu_load_pgd(vcpu);
-		if (kvm_check_request(KVM_REQ_TLB_FLUSH, vcpu))
-			kvm_vcpu_flush_tlb(vcpu, true);
+		if (kvm_check_request(KVM_REQ_TLB_FLUSH, vcpu)) {
+			kvm_vcpu_flush_tlb_all(vcpu);
+
+			/* Flushing all ASIDs flushes the current ASID... */
+			kvm_clear_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
+		}
+		if (kvm_check_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu))
+			kvm_vcpu_flush_tlb_current(vcpu);
+		if (kvm_check_request(KVM_REQ_HV_TLB_FLUSH, vcpu))
+			kvm_vcpu_flush_tlb_guest(vcpu);
+
 		if (kvm_check_request(KVM_REQ_REPORT_TPR_ACCESS, vcpu)) {
 			vcpu->run->exit_reason = KVM_EXIT_TPR_ACCESS;
 			r = 0;
@@ -8420,7 +8433,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD;
 	}
 
-	kvm_x86_ops.run(vcpu);
+	exit_fastpath = kvm_x86_ops.run(vcpu);
 
 	/*
 	 * Do this here before restoring debug registers on the host.  And
@@ -8452,7 +8465,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	vcpu->mode = OUTSIDE_GUEST_MODE;
 	smp_wmb();
 
-	kvm_x86_ops.handle_exit_irqoff(vcpu, &exit_fastpath);
+	kvm_x86_ops.handle_exit_irqoff(vcpu);
 
 	/*
 	 * Consume any pending interrupts, including the possible source of
@@ -8541,8 +8554,8 @@ static inline int vcpu_block(struct kvm *kvm, struct kvm_vcpu *vcpu)
 
 static inline bool kvm_vcpu_running(struct kvm_vcpu *vcpu)
 {
-	if (is_guest_mode(vcpu) && kvm_x86_ops.check_nested_events)
-		kvm_x86_ops.check_nested_events(vcpu);
+	if (is_guest_mode(vcpu))
+		kvm_x86_ops.nested_ops->check_events(vcpu);
 
 	return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE &&
 		!vcpu->arch.apf.halted);
@@ -8724,8 +8737,9 @@ static void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 	trace_kvm_fpu(0);
 }
 
-int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 {
+	struct kvm_run *kvm_run = vcpu->run;
 	int r;
 
 	vcpu_load(vcpu);
@@ -8743,18 +8757,18 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		r = -EAGAIN;
 		if (signal_pending(current)) {
 			r = -EINTR;
-			vcpu->run->exit_reason = KVM_EXIT_INTR;
+			kvm_run->exit_reason = KVM_EXIT_INTR;
 			++vcpu->stat.signal_exits;
 		}
 		goto out;
 	}
 
-	if (vcpu->run->kvm_valid_regs & ~KVM_SYNC_X86_VALID_FIELDS) {
+	if (kvm_run->kvm_valid_regs & ~KVM_SYNC_X86_VALID_FIELDS) {
 		r = -EINVAL;
 		goto out;
 	}
 
-	if (vcpu->run->kvm_dirty_regs) {
+	if (kvm_run->kvm_dirty_regs) {
 		r = sync_regs(vcpu);
 		if (r != 0)
 			goto out;
@@ -8784,7 +8798,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 out:
 	kvm_put_guest_fpu(vcpu);
-	if (vcpu->run->kvm_valid_regs)
+	if (kvm_run->kvm_valid_regs)
 		store_regs(vcpu);
 	post_kvm_run_save(vcpu);
 	kvm_sigset_deactivate(vcpu);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index b968acc0516f..7b5ed8ed628e 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -125,6 +125,12 @@ static inline bool mmu_is_nested(struct kvm_vcpu *vcpu)
 	return vcpu->arch.walk_mmu == &vcpu->arch.nested_mmu;
 }
 
+static inline void kvm_vcpu_flush_tlb_current(struct kvm_vcpu *vcpu)
+{
+	++vcpu->stat.tlb_flush;
+	kvm_x86_ops.tlb_flush_current(vcpu);
+}
+
 static inline int is_pae(struct kvm_vcpu *vcpu)
 {
 	return kvm_read_cr4_bits(vcpu, X86_CR4_PAE);
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 5246db42de45..6110bce7237b 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -6,10 +6,19 @@
 # Produces uninteresting flaky coverage.
 KCOV_INSTRUMENT_delay.o	:= n
 
+# KCSAN uses udelay for introducing watchpoint delay; avoid recursion.
+KCSAN_SANITIZE_delay.o := n
+ifdef CONFIG_KCSAN
+# In case KCSAN+lockdep+ftrace are enabled, disable ftrace for delay.o to avoid
+# lockdep -> [other libs] -> KCSAN -> udelay -> ftrace -> lockdep recursion.
+CFLAGS_REMOVE_delay.o = $(CC_FLAGS_FTRACE)
+endif
+
 # Early boot use of cmdline; don't instrument it
 ifdef CONFIG_AMD_MEM_ENCRYPT
 KCOV_INSTRUMENT_cmdline.o := n
 KASAN_SANITIZE_cmdline.o  := n
+KCSAN_SANITIZE_cmdline.o  := n
 
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_cmdline.o = -pg
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 98f7c6fa2eaa..f7fd0e868c9c 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -7,6 +7,10 @@ KCOV_INSTRUMENT_mem_encrypt_identity.o	:= n
 KASAN_SANITIZE_mem_encrypt.o		:= n
 KASAN_SANITIZE_mem_encrypt_identity.o	:= n
 
+# Disable KCSAN entirely, because otherwise we get warnings that some functions
+# reference __initdata sections.
+KCSAN_SANITIZE := n
+
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_mem_encrypt.o		= -pg
 CFLAGS_REMOVE_mem_encrypt_identity.o	= -pg
diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c
index 56f9189bbadb..5199d8a1daf1 100644
--- a/arch/x86/mm/cpu_entry_area.c
+++ b/arch/x86/mm/cpu_entry_area.c
@@ -17,7 +17,7 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(struct exception_stacks, exception_stacks);
 DEFINE_PER_CPU(struct cea_exception_stacks*, cea_exception_stacks);
 #endif
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_DOUBLEFAULT)
+#ifdef CONFIG_X86_32
 DECLARE_PER_CPU_PAGE_ALIGNED(struct doublefault_stack, doublefault_stack);
 #endif
 
@@ -114,12 +114,10 @@ static void __init percpu_setup_exception_stacks(unsigned int cpu)
 #else
 static inline void percpu_setup_exception_stacks(unsigned int cpu)
 {
-#ifdef CONFIG_DOUBLEFAULT
 	struct cpu_entry_area *cea = get_cpu_entry_area(cpu);
 
 	cea_map_percpu_pages(&cea->doublefault_stack,
 			     &per_cpu(doublefault_stack, cpu), 1, PAGE_KERNEL);
-#endif
 }
 #endif
 
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 5bfd5aef5378..cf5781142716 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -181,28 +181,21 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 #endif /* CONFIG_HUGETLB_PAGE */
 
 #ifdef CONFIG_X86_64
-static __init int setup_hugepagesz(char *opt)
+bool __init arch_hugetlb_valid_size(unsigned long size)
 {
-	unsigned long ps = memparse(opt, &opt);
-	if (ps == PMD_SIZE) {
-		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
-	} else if (ps == PUD_SIZE && boot_cpu_has(X86_FEATURE_GBPAGES)) {
-		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
-	} else {
-		hugetlb_bad_size();
-		printk(KERN_ERR "hugepagesz: Unsupported page size %lu M\n",
-			ps >> 20);
-		return 0;
-	}
-	return 1;
+	if (size == PMD_SIZE)
+		return true;
+	else if (size == PUD_SIZE && boot_cpu_has(X86_FEATURE_GBPAGES))
+		return true;
+	else
+		return false;
 }
-__setup("hugepagesz=", setup_hugepagesz);
 
 #ifdef CONFIG_CONTIG_ALLOC
 static __init int gigantic_pages_init(void)
 {
 	/* With compaction or CMA we can allocate gigantic pages at runtime */
-	if (boot_cpu_has(X86_FEATURE_GBPAGES) && !size_to_hstate(1UL << PUD_SHIFT))
+	if (boot_cpu_has(X86_FEATURE_GBPAGES))
 		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
 	return 0;
 }
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 1bba16c5742b..235dd0e35741 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -49,7 +49,7 @@
  *   Index into __pte2cachemode_tbl[] are the caching attribute bits of the pte
  *   (_PAGE_PWT, _PAGE_PCD, _PAGE_PAT) at index bit positions 0, 1, 2.
  */
-uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
+static uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
 	[_PAGE_CACHE_MODE_WB      ]	= 0         | 0        ,
 	[_PAGE_CACHE_MODE_WC      ]	= 0         | _PAGE_PCD,
 	[_PAGE_CACHE_MODE_UC_MINUS]	= 0         | _PAGE_PCD,
@@ -57,9 +57,16 @@ uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
 	[_PAGE_CACHE_MODE_WT      ]	= 0         | _PAGE_PCD,
 	[_PAGE_CACHE_MODE_WP      ]	= 0         | _PAGE_PCD,
 };
-EXPORT_SYMBOL(__cachemode2pte_tbl);
 
-uint8_t __pte2cachemode_tbl[8] = {
+unsigned long cachemode2protval(enum page_cache_mode pcm)
+{
+	if (likely(pcm == 0))
+		return 0;
+	return __cachemode2pte_tbl[pcm];
+}
+EXPORT_SYMBOL(cachemode2protval);
+
+static uint8_t __pte2cachemode_tbl[8] = {
 	[__pte2cm_idx( 0        | 0         | 0        )] = _PAGE_CACHE_MODE_WB,
 	[__pte2cm_idx(_PAGE_PWT | 0         | 0        )] = _PAGE_CACHE_MODE_UC_MINUS,
 	[__pte2cm_idx( 0        | _PAGE_PCD | 0        )] = _PAGE_CACHE_MODE_UC_MINUS,
@@ -69,7 +76,22 @@ uint8_t __pte2cachemode_tbl[8] = {
 	[__pte2cm_idx(0         | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
 	[__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC,
 };
-EXPORT_SYMBOL(__pte2cachemode_tbl);
+
+/* Check that the write-protect PAT entry is set for write-protect */
+bool x86_has_pat_wp(void)
+{
+	return __pte2cachemode_tbl[_PAGE_CACHE_MODE_WP] == _PAGE_CACHE_MODE_WP;
+}
+
+enum page_cache_mode pgprot2cachemode(pgprot_t pgprot)
+{
+	unsigned long masked;
+
+	masked = pgprot_val(pgprot) & _PAGE_CACHE_MASK;
+	if (likely(masked == 0))
+		return 0;
+	return __pte2cachemode_tbl[__pte2cm_idx(masked)];
+}
 
 static unsigned long __initdata pgt_buf_start;
 static unsigned long __initdata pgt_buf_end;
@@ -172,6 +194,19 @@ struct map_range {
 
 static int page_size_mask;
 
+/*
+ * Save some of cr4 feature set we're using (e.g.  Pentium 4MB
+ * enable and PPro Global page enable), so that any CPU's that boot
+ * up after us can get the correct flags. Invoked on the boot CPU.
+ */
+static inline void cr4_set_bits_and_update_boot(unsigned long mask)
+{
+	mmu_cr4_features |= mask;
+	if (trampoline_cr4_features)
+		*trampoline_cr4_features = mmu_cr4_features;
+	cr4_set_bits(mask);
+}
+
 static void __init probe_page_size_mask(void)
 {
 	/*
@@ -949,7 +984,7 @@ void __init zone_sizes_init(void)
 	max_zone_pfns[ZONE_HIGHMEM]	= max_pfn;
 #endif
 
-	free_area_init_nodes(max_zone_pfns);
+	free_area_init(max_zone_pfns);
 }
 
 __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = {
@@ -957,7 +992,6 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = {
 	.next_asid = 1,
 	.cr4 = ~0UL,	/* fail hard if we screw up cr4 shadow initialization */
 };
-EXPORT_PER_CPU_SYMBOL(cpu_tlbstate);
 
 void update_cache_mode_entry(unsigned entry, enum page_cache_mode cache)
 {
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 3b289c2f75cd..c7a1c6c23431 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -298,7 +298,7 @@ static void __set_pte_vaddr(pud_t *pud, unsigned long vaddr, pte_t new_pte)
 	 * It's enough to flush this one mapping.
 	 * (PGE mappings get flushed as well)
 	 */
-	__flush_tlb_one_kernel(vaddr);
+	flush_tlb_one_kernel(vaddr);
 }
 
 void set_pte_vaddr_p4d(p4d_t *p4d_page, unsigned long vaddr, pte_t new_pte)
@@ -367,7 +367,7 @@ static void __init __init_extra_mapping(unsigned long phys, unsigned long size,
 	pgprot_t prot;
 
 	pgprot_val(prot) = pgprot_val(PAGE_KERNEL_LARGE) |
-		pgprot_val(pgprot_4k_2_large(cachemode2pgprot(cache)));
+		protval_4k_2_large(cachemode2protval(cache));
 	BUG_ON((phys & ~PMD_MASK) || (size & ~PMD_MASK));
 	for (; size; phys += PMD_SIZE, size -= PMD_SIZE) {
 		pgd = pgd_offset_k((unsigned long)__va(phys));
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 18c637c0dc6f..986d57534fd6 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -778,10 +778,8 @@ void __init *early_memremap_encrypted(resource_size_t phys_addr,
 void __init *early_memremap_encrypted_wp(resource_size_t phys_addr,
 					 unsigned long size)
 {
-	/* Be sure the write-protect PAT entry is set for write-protect */
-	if (__pte2cachemode_tbl[_PAGE_CACHE_MODE_WP] != _PAGE_CACHE_MODE_WP)
+	if (!x86_has_pat_wp())
 		return NULL;
-
 	return early_memremap_prot(phys_addr, size, __PAGE_KERNEL_ENC_WP);
 }
 
@@ -799,10 +797,8 @@ void __init *early_memremap_decrypted(resource_size_t phys_addr,
 void __init *early_memremap_decrypted_wp(resource_size_t phys_addr,
 					 unsigned long size)
 {
-	/* Be sure the write-protect PAT entry is set for write-protect */
-	if (__pte2cachemode_tbl[_PAGE_CACHE_MODE_WP] != _PAGE_CACHE_MODE_WP)
+	if (!x86_has_pat_wp())
 		return NULL;
-
 	return early_memremap_prot(phys_addr, size, __PAGE_KERNEL_NOENC_WP);
 }
 #endif	/* CONFIG_AMD_MEM_ENCRYPT */
@@ -889,5 +885,5 @@ void __init __early_set_fixmap(enum fixed_addresses idx,
 		set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, flags));
 	else
 		pte_clear(&init_mm, addr, pte);
-	__flush_tlb_one_kernel(addr);
+	flush_tlb_one_kernel(addr);
 }
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 9994353fb75d..be020a7bc414 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -130,7 +130,7 @@ static void clear_pmd_presence(pmd_t *pmd, bool clear, pmdval_t *old)
 	pmdval_t v = pmd_val(*pmd);
 	if (clear) {
 		*old = v;
-		new_pmd = pmd_mknotpresent(*pmd);
+		new_pmd = pmd_mkinvalid(*pmd);
 	} else {
 		/* Presume this has been called with clear==true previously */
 		new_pmd = __pmd(*old);
@@ -173,7 +173,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 		return -1;
 	}
 
-	__flush_tlb_one_kernel(f->addr);
+	flush_tlb_one_kernel(f->addr);
 	return 0;
 }
 
diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
index a03614bd3e1a..4a781cf99e92 100644
--- a/arch/x86/mm/mem_encrypt.c
+++ b/arch/x86/mm/mem_encrypt.c
@@ -134,7 +134,7 @@ static void __init __sme_early_map_unmap_mem(void *vaddr, unsigned long size,
 		size = (size <= PMD_SIZE) ? 0 : size - PMD_SIZE;
 	} while (size);
 
-	__native_flush_tlb();
+	flush_tlb_local();
 }
 
 void __init sme_unmap_bootdata(char *real_mode_data)
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index cb91eccc4960..c90c20904a60 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -18,7 +18,9 @@
 #include <linux/sched/signal.h>
 #include <linux/sched/mm.h>
 #include <linux/compat.h>
+#include <linux/elf-randomize.h>
 #include <asm/elf.h>
+#include <asm/io.h>
 
 #include "physaddr.h"
 
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 59ba008504dc..8ee952038c80 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -517,8 +517,10 @@ static void __init numa_clear_kernel_node_hotplug(void)
 	 *   reserve specific pages for Sandy Bridge graphics. ]
 	 */
 	for_each_memblock(reserved, mb_region) {
-		if (mb_region->nid != MAX_NUMNODES)
-			node_set(mb_region->nid, reserved_nodemask);
+		int nid = memblock_get_region_node(mb_region);
+
+		if (nid != MAX_NUMNODES)
+			node_set(nid, reserved_nodemask);
 	}
 
 	/*
@@ -735,12 +737,9 @@ void __init x86_numa_init(void)
 
 static void __init init_memory_less_node(int nid)
 {
-	unsigned long zones_size[MAX_NR_ZONES] = {0};
-	unsigned long zholes_size[MAX_NR_ZONES] = {0};
-
 	/* Allocate and initialize node data. Memory-less node is now online.*/
 	alloc_node_data(nid);
-	free_area_init_node(nid, zones_size, 0, zholes_size);
+	free_area_init_memoryless_node(nid);
 
 	/*
 	 * All zonelists will be built later in start_kernel() after per cpu
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index 59eca6a94ce7..577fdddaa3e8 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -68,6 +68,11 @@ static DEFINE_SPINLOCK(cpa_lock);
 #define CPA_PAGES_ARRAY 4
 #define CPA_NO_CHECK_ALIAS 8 /* Do not search for aliases */
 
+static inline pgprot_t cachemode2pgprot(enum page_cache_mode pcm)
+{
+	return __pgprot(cachemode2protval(pcm));
+}
+
 #ifdef CONFIG_PROC_FS
 static unsigned long direct_pages_count[PG_LEVEL_NUM];
 
@@ -129,7 +134,7 @@ static inline void cpa_inc_2m_checked(void)
 
 static inline void cpa_inc_4k_install(void)
 {
-	cpa_4k_install++;
+	data_race(cpa_4k_install++);
 }
 
 static inline void cpa_inc_lp_sameprot(int level)
@@ -340,7 +345,7 @@ static void __cpa_flush_tlb(void *data)
 	unsigned int i;
 
 	for (i = 0; i < cpa->numpages; i++)
-		__flush_tlb_one_kernel(fix_addr(__cpa_addr(cpa, i)));
+		flush_tlb_one_kernel(fix_addr(__cpa_addr(cpa, i)));
 }
 
 static void cpa_flush(struct cpa_data *data, int cache)
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 7bd2c3a52297..d88e9064c28e 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -19,6 +19,14 @@ EXPORT_SYMBOL(physical_mask);
 #define PGTABLE_HIGHMEM 0
 #endif
 
+#ifndef CONFIG_PARAVIRT
+static inline
+void paravirt_tlb_remove_table(struct mmu_gather *tlb, void *table)
+{
+	tlb_remove_page(tlb, table);
+}
+#endif
+
 gfp_t __userpte_alloc_gfp = GFP_PGTABLE_USER | PGTABLE_HIGHMEM;
 
 pgtable_t pte_alloc_one(struct mm_struct *mm)
@@ -706,11 +714,9 @@ int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
 	if (pud_present(*pud) && !pud_huge(*pud))
 		return 0;
 
-	prot = pgprot_4k_2_large(prot);
-
 	set_pte((pte_t *)pud, pfn_pte(
 		(u64)addr >> PAGE_SHIFT,
-		__pgprot(pgprot_val(prot) | _PAGE_PSE)));
+		__pgprot(protval_4k_2_large(pgprot_val(prot)) | _PAGE_PSE)));
 
 	return 1;
 }
@@ -738,11 +744,9 @@ int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot)
 	if (pmd_present(*pmd) && !pmd_huge(*pmd))
 		return 0;
 
-	prot = pgprot_4k_2_large(prot);
-
 	set_pte((pte_t *)pmd, pfn_pte(
 		(u64)addr >> PAGE_SHIFT,
-		__pgprot(pgprot_val(prot) | _PAGE_PSE)));
+		__pgprot(protval_4k_2_large(pgprot_val(prot)) | _PAGE_PSE)));
 
 	return 1;
 }
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 0e6700eaa4f9..e1ce59dc558f 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -64,7 +64,7 @@ void set_pte_vaddr(unsigned long vaddr, pte_t pteval)
 	 * It's enough to flush this one mapping.
 	 * (PGE mappings get flushed as well)
 	 */
-	__flush_tlb_one_kernel(vaddr);
+	flush_tlb_one_kernel(vaddr);
 }
 
 unsigned long __FIXADDR_TOP = 0xfffff000;
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 66f96f21a7b6..cf81902e6992 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -18,6 +18,16 @@
 
 #include "mm_internal.h"
 
+#ifdef CONFIG_PARAVIRT
+# define STATIC_NOPV
+#else
+# define STATIC_NOPV			static
+# define __flush_tlb_local		native_flush_tlb_local
+# define __flush_tlb_global		native_flush_tlb_global
+# define __flush_tlb_one_user(addr)	native_flush_tlb_one_user(addr)
+# define __flush_tlb_others(msk, info)	native_flush_tlb_others(msk, info)
+#endif
+
 /*
  *	TLB flushing, formerly SMP-only
  *		c/o Linus Torvalds.
@@ -38,6 +48,126 @@
  */
 #define LAST_USER_MM_IBPB	0x1UL
 
+/*
+ * The x86 feature is called PCID (Process Context IDentifier). It is similar
+ * to what is traditionally called ASID on the RISC processors.
+ *
+ * We don't use the traditional ASID implementation, where each process/mm gets
+ * its own ASID and flush/restart when we run out of ASID space.
+ *
+ * Instead we have a small per-cpu array of ASIDs and cache the last few mm's
+ * that came by on this CPU, allowing cheaper switch_mm between processes on
+ * this CPU.
+ *
+ * We end up with different spaces for different things. To avoid confusion we
+ * use different names for each of them:
+ *
+ * ASID  - [0, TLB_NR_DYN_ASIDS-1]
+ *         the canonical identifier for an mm
+ *
+ * kPCID - [1, TLB_NR_DYN_ASIDS]
+ *         the value we write into the PCID part of CR3; corresponds to the
+ *         ASID+1, because PCID 0 is special.
+ *
+ * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS]
+ *         for KPTI each mm has two address spaces and thus needs two
+ *         PCID values, but we can still do with a single ASID denomination
+ *         for each mm. Corresponds to kPCID + 2048.
+ *
+ */
+
+/* There are 12 bits of space for ASIDS in CR3 */
+#define CR3_HW_ASID_BITS		12
+
+/*
+ * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for
+ * user/kernel switches
+ */
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+# define PTI_CONSUMED_PCID_BITS	1
+#else
+# define PTI_CONSUMED_PCID_BITS	0
+#endif
+
+#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS)
+
+/*
+ * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid.  -1 below to account
+ * for them being zero-based.  Another -1 is because PCID 0 is reserved for
+ * use by non-PCID-aware users.
+ */
+#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2)
+
+/*
+ * Given @asid, compute kPCID
+ */
+static inline u16 kern_pcid(u16 asid)
+{
+	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
+
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	/*
+	 * Make sure that the dynamic ASID space does not confict with the
+	 * bit we are using to switch between user and kernel ASIDs.
+	 */
+	BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT));
+
+	/*
+	 * The ASID being passed in here should have respected the
+	 * MAX_ASID_AVAILABLE and thus never have the switch bit set.
+	 */
+	VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT));
+#endif
+	/*
+	 * The dynamically-assigned ASIDs that get passed in are small
+	 * (<TLB_NR_DYN_ASIDS).  They never have the high switch bit set,
+	 * so do not bother to clear it.
+	 *
+	 * If PCID is on, ASID-aware code paths put the ASID+1 into the
+	 * PCID bits.  This serves two purposes.  It prevents a nasty
+	 * situation in which PCID-unaware code saves CR3, loads some other
+	 * value (with PCID == 0), and then restores CR3, thus corrupting
+	 * the TLB for ASID 0 if the saved ASID was nonzero.  It also means
+	 * that any bugs involving loading a PCID-enabled CR3 with
+	 * CR4.PCIDE off will trigger deterministically.
+	 */
+	return asid + 1;
+}
+
+/*
+ * Given @asid, compute uPCID
+ */
+static inline u16 user_pcid(u16 asid)
+{
+	u16 ret = kern_pcid(asid);
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	ret |= 1 << X86_CR3_PTI_PCID_USER_BIT;
+#endif
+	return ret;
+}
+
+static inline unsigned long build_cr3(pgd_t *pgd, u16 asid)
+{
+	if (static_cpu_has(X86_FEATURE_PCID)) {
+		return __sme_pa(pgd) | kern_pcid(asid);
+	} else {
+		VM_WARN_ON_ONCE(asid != 0);
+		return __sme_pa(pgd);
+	}
+}
+
+static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
+{
+	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
+	/*
+	 * Use boot_cpu_has() instead of this_cpu_has() as this function
+	 * might be called during early boot. This should work even after
+	 * boot because all CPU's the have same capabilities:
+	 */
+	VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
+	return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
+}
+
 /*
  * We get here when we do something requiring a TLB invalidation
  * but could not go invalidate all of the contexts.  We do the
@@ -110,6 +240,32 @@ static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen,
 	*need_flush = true;
 }
 
+/*
+ * Given an ASID, flush the corresponding user ASID.  We can delay this
+ * until the next time we switch to it.
+ *
+ * See SWITCH_TO_USER_CR3.
+ */
+static inline void invalidate_user_asid(u16 asid)
+{
+	/* There is no user ASID if address space separation is off */
+	if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION))
+		return;
+
+	/*
+	 * We only have a single ASID if PCID is off and the CR3
+	 * write will have flushed it.
+	 */
+	if (!cpu_feature_enabled(X86_FEATURE_PCID))
+		return;
+
+	if (!static_cpu_has(X86_FEATURE_PTI))
+		return;
+
+	__set_bit(kern_pcid(asid),
+		  (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask));
+}
+
 static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush)
 {
 	unsigned long new_mm_cr3;
@@ -272,6 +428,26 @@ static void cond_ibpb(struct task_struct *next)
 	}
 }
 
+#ifdef CONFIG_PERF_EVENTS
+static inline void cr4_update_pce_mm(struct mm_struct *mm)
+{
+	if (static_branch_unlikely(&rdpmc_always_available_key) ||
+	    (!static_branch_unlikely(&rdpmc_never_available_key) &&
+	     atomic_read(&mm->context.perf_rdpmc_allowed)))
+		cr4_set_bits_irqsoff(X86_CR4_PCE);
+	else
+		cr4_clear_bits_irqsoff(X86_CR4_PCE);
+}
+
+void cr4_update_pce(void *ignored)
+{
+	cr4_update_pce_mm(this_cpu_read(cpu_tlbstate.loaded_mm));
+}
+
+#else
+static inline void cr4_update_pce_mm(struct mm_struct *mm) { }
+#endif
+
 void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 			struct task_struct *tsk)
 {
@@ -440,7 +616,7 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 	this_cpu_write(cpu_tlbstate.loaded_mm_asid, new_asid);
 
 	if (next != real_prev) {
-		load_mm_cr4_irqsoff(next);
+		cr4_update_pce_mm(next);
 		switch_ldt(real_prev, next);
 	}
 }
@@ -617,7 +793,7 @@ static void flush_tlb_func_common(const struct flush_tlb_info *f,
 		unsigned long addr = f->start;
 
 		while (addr < f->end) {
-			__flush_tlb_one_user(addr);
+			flush_tlb_one_user(addr);
 			addr += 1UL << f->stride_shift;
 		}
 		if (local)
@@ -625,7 +801,7 @@ static void flush_tlb_func_common(const struct flush_tlb_info *f,
 		trace_tlb_flush(reason, nr_invalidate);
 	} else {
 		/* Full flush. */
-		local_flush_tlb();
+		flush_tlb_local();
 		if (local)
 			count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
 		trace_tlb_flush(reason, TLB_FLUSH_ALL);
@@ -660,8 +836,8 @@ static bool tlb_is_not_lazy(int cpu, void *data)
 	return !per_cpu(cpu_tlbstate.is_lazy, cpu);
 }
 
-void native_flush_tlb_others(const struct cpumask *cpumask,
-			     const struct flush_tlb_info *info)
+STATIC_NOPV void native_flush_tlb_others(const struct cpumask *cpumask,
+					 const struct flush_tlb_info *info)
 {
 	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
 	if (info->end == TLB_FLUSH_ALL)
@@ -711,6 +887,12 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 				(void *)info, 1, cpumask);
 }
 
+void flush_tlb_others(const struct cpumask *cpumask,
+		      const struct flush_tlb_info *info)
+{
+	__flush_tlb_others(cpumask, info);
+}
+
 /*
  * See Documentation/x86/tlb.rst for details.  We choose 33
  * because it is large enough to cover the vast majority (at
@@ -821,7 +1003,7 @@ static void do_kernel_range_flush(void *info)
 
 	/* flush range by one by one 'invlpg' */
 	for (addr = f->start; addr < f->end; addr += PAGE_SIZE)
-		__flush_tlb_one_kernel(addr);
+		flush_tlb_one_kernel(addr);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -843,6 +1025,164 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	}
 }
 
+/*
+ * This can be used from process context to figure out what the value of
+ * CR3 is without needing to do a (slow) __read_cr3().
+ *
+ * It's intended to be used for code like KVM that sneakily changes CR3
+ * and needs to restore it.  It needs to be used very carefully.
+ */
+unsigned long __get_current_cr3_fast(void)
+{
+	unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd,
+		this_cpu_read(cpu_tlbstate.loaded_mm_asid));
+
+	/* For now, be very restrictive about when this can be called. */
+	VM_WARN_ON(in_nmi() || preemptible());
+
+	VM_BUG_ON(cr3 != __read_cr3());
+	return cr3;
+}
+EXPORT_SYMBOL_GPL(__get_current_cr3_fast);
+
+/*
+ * Flush one page in the kernel mapping
+ */
+void flush_tlb_one_kernel(unsigned long addr)
+{
+	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
+
+	/*
+	 * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its
+	 * paravirt equivalent.  Even with PCID, this is sufficient: we only
+	 * use PCID if we also use global PTEs for the kernel mapping, and
+	 * INVLPG flushes global translations across all address spaces.
+	 *
+	 * If PTI is on, then the kernel is mapped with non-global PTEs, and
+	 * __flush_tlb_one_user() will flush the given address for the current
+	 * kernel address space and for its usermode counterpart, but it does
+	 * not flush it for other address spaces.
+	 */
+	flush_tlb_one_user(addr);
+
+	if (!static_cpu_has(X86_FEATURE_PTI))
+		return;
+
+	/*
+	 * See above.  We need to propagate the flush to all other address
+	 * spaces.  In principle, we only need to propagate it to kernelmode
+	 * address spaces, but the extra bookkeeping we would need is not
+	 * worth it.
+	 */
+	this_cpu_write(cpu_tlbstate.invalidate_other, true);
+}
+
+/*
+ * Flush one page in the user mapping
+ */
+STATIC_NOPV void native_flush_tlb_one_user(unsigned long addr)
+{
+	u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
+
+	asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
+
+	if (!static_cpu_has(X86_FEATURE_PTI))
+		return;
+
+	/*
+	 * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1.
+	 * Just use invalidate_user_asid() in case we are called early.
+	 */
+	if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE))
+		invalidate_user_asid(loaded_mm_asid);
+	else
+		invpcid_flush_one(user_pcid(loaded_mm_asid), addr);
+}
+
+void flush_tlb_one_user(unsigned long addr)
+{
+	__flush_tlb_one_user(addr);
+}
+
+/*
+ * Flush everything
+ */
+STATIC_NOPV void native_flush_tlb_global(void)
+{
+	unsigned long cr4, flags;
+
+	if (static_cpu_has(X86_FEATURE_INVPCID)) {
+		/*
+		 * Using INVPCID is considerably faster than a pair of writes
+		 * to CR4 sandwiched inside an IRQ flag save/restore.
+		 *
+		 * Note, this works with CR4.PCIDE=0 or 1.
+		 */
+		invpcid_flush_all();
+		return;
+	}
+
+	/*
+	 * Read-modify-write to CR4 - protect it from preemption and
+	 * from interrupts. (Use the raw variant because this code can
+	 * be called from deep inside debugging code.)
+	 */
+	raw_local_irq_save(flags);
+
+	cr4 = this_cpu_read(cpu_tlbstate.cr4);
+	/* toggle PGE */
+	native_write_cr4(cr4 ^ X86_CR4_PGE);
+	/* write old PGE again and flush TLBs */
+	native_write_cr4(cr4);
+
+	raw_local_irq_restore(flags);
+}
+
+/*
+ * Flush the entire current user mapping
+ */
+STATIC_NOPV void native_flush_tlb_local(void)
+{
+	/*
+	 * Preemption or interrupts must be disabled to protect the access
+	 * to the per CPU variable and to prevent being preempted between
+	 * read_cr3() and write_cr3().
+	 */
+	WARN_ON_ONCE(preemptible());
+
+	invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid));
+
+	/* If current->mm == NULL then the read_cr3() "borrows" an mm */
+	native_write_cr3(__native_read_cr3());
+}
+
+void flush_tlb_local(void)
+{
+	__flush_tlb_local();
+}
+
+/*
+ * Flush everything
+ */
+void __flush_tlb_all(void)
+{
+	/*
+	 * This is to catch users with enabled preemption and the PGE feature
+	 * and don't trigger the warning in __native_flush_tlb().
+	 */
+	VM_WARN_ON_ONCE(preemptible());
+
+	if (boot_cpu_has(X86_FEATURE_PGE)) {
+		__flush_tlb_global();
+	} else {
+		/*
+		 * !PGE -> !PCID (setup_pcid()), thus every flush is total.
+		 */
+		flush_tlb_local();
+	}
+}
+EXPORT_SYMBOL_GPL(__flush_tlb_all);
+
 /*
  * arch_tlbbatch_flush() performs a full TLB flush regardless of the active mm.
  * This means that the 'struct flush_tlb_info' that describes which mappings to
@@ -874,6 +1214,38 @@ void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
 	put_cpu();
 }
 
+/*
+ * Blindly accessing user memory from NMI context can be dangerous
+ * if we're in the middle of switching the current user task or
+ * switching the loaded mm.  It can also be dangerous if we
+ * interrupted some kernel code that was temporarily using a
+ * different mm.
+ */
+bool nmi_uaccess_okay(void)
+{
+	struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
+	struct mm_struct *current_mm = current->mm;
+
+	VM_WARN_ON_ONCE(!loaded_mm);
+
+	/*
+	 * The condition we want to check is
+	 * current_mm->pgd == __va(read_cr3_pa()).  This may be slow, though,
+	 * if we're running in a VM with shadow paging, and nmi_uaccess_okay()
+	 * is supposed to be reasonably fast.
+	 *
+	 * Instead, we check the almost equivalent but somewhat conservative
+	 * condition below, and we rely on the fact that switch_mm_irqs_off()
+	 * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3.
+	 */
+	if (loaded_mm != current_mm)
+		return false;
+
+	VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa()));
+
+	return true;
+}
+
 static ssize_t tlbflush_read_file(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 1aae5302501d..e966115d105c 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -62,12 +62,12 @@ static unsigned long efi_runtime, efi_nr_tables;
 unsigned long efi_fw_vendor, efi_config_table;
 
 static const efi_config_table_type_t arch_tables[] __initconst = {
-	{EFI_PROPERTIES_TABLE_GUID, "PROP", &prop_phys},
-	{UGA_IO_PROTOCOL_GUID, "UGA", &uga_phys},
+	{EFI_PROPERTIES_TABLE_GUID,	&prop_phys,		"PROP"		},
+	{UGA_IO_PROTOCOL_GUID,		&uga_phys,		"UGA"		},
 #ifdef CONFIG_X86_UV
-	{UV_SYSTEM_TABLE_GUID, "UVsystab", &uv_systab_phys},
+	{UV_SYSTEM_TABLE_GUID,		&uv_systab_phys,	"UVsystab"	},
 #endif
-	{NULL_GUID, NULL, NULL},
+	{},
 };
 
 static const unsigned long * const efi_tables[] = {
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 1fd321f37f1b..4ea69690c3e4 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -293,10 +293,10 @@ static void bau_process_message(struct msg_desc *mdp, struct bau_control *bcp,
 	 * This must be a normal message, or retry of a normal message
 	 */
 	if (msg->address == TLB_FLUSH_ALL) {
-		local_flush_tlb();
+		flush_tlb_local();
 		stat->d_alltlb++;
 	} else {
-		__flush_tlb_one_user(msg->address);
+		flush_tlb_one_user(msg->address);
 		stat->d_onetlb++;
 	}
 	stat->d_requestee++;
diff --git a/arch/x86/purgatory/.gitignore b/arch/x86/purgatory/.gitignore
new file mode 100644
index 000000000000..d2be1500671d
--- /dev/null
+++ b/arch/x86/purgatory/.gitignore
@@ -0,0 +1 @@
+purgatory.chk
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index fb4ee5444379..b04e6e72a592 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -14,10 +14,18 @@ $(obj)/sha256.o: $(srctree)/lib/crypto/sha256.c FORCE
 
 CFLAGS_sha256.o := -D__DISABLE_EXPORTS
 
-LDFLAGS_purgatory.ro := -e purgatory_start -r --no-undefined -nostdlib -z nodefaultlib
-targets += purgatory.ro
-
+# When linking purgatory.ro with -r unresolved symbols are not checked,
+# also link a purgatory.chk binary without -r to check for unresolved symbols.
+PURGATORY_LDFLAGS := -e purgatory_start -nostdlib -z nodefaultlib
+LDFLAGS_purgatory.ro := -r $(PURGATORY_LDFLAGS)
+LDFLAGS_purgatory.chk := $(PURGATORY_LDFLAGS)
+targets += purgatory.ro purgatory.chk
+
+# Sanitizer, etc. runtimes are unavailable and cannot be linked here.
+GCOV_PROFILE	:= n
 KASAN_SANITIZE	:= n
+UBSAN_SANITIZE	:= n
+KCSAN_SANITIZE	:= n
 KCOV_INSTRUMENT := n
 
 # These are adjustments to the compiler flags used for objects that
@@ -25,7 +33,7 @@ KCOV_INSTRUMENT := n
 
 PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel
 PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss
-PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN)
+PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) -DDISABLE_BRANCH_PROFILING
 
 # Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That
 # in turn leaves some undefined symbols like __fentry__ in purgatory and not
@@ -58,12 +66,15 @@ CFLAGS_string.o			+= $(PURGATORY_CFLAGS)
 $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
 		$(call if_changed,ld)
 
+$(obj)/purgatory.chk: $(obj)/purgatory.ro FORCE
+		$(call if_changed,ld)
+
 targets += kexec-purgatory.c
 
 quiet_cmd_bin2c = BIN2C   $@
       cmd_bin2c = $(objtree)/scripts/bin2c kexec_purgatory < $< > $@
 
-$(obj)/kexec-purgatory.c: $(obj)/purgatory.ro FORCE
+$(obj)/kexec-purgatory.c: $(obj)/purgatory.ro $(obj)/purgatory.chk FORCE
 	$(call if_changed,bin2c)
 
 obj-$(CONFIG_KEXEC_FILE)	+= kexec-purgatory.o
diff --git a/arch/x86/realmode/Makefile b/arch/x86/realmode/Makefile
index 682c895753d9..6b1f3a4eeb44 100644
--- a/arch/x86/realmode/Makefile
+++ b/arch/x86/realmode/Makefile
@@ -6,7 +6,10 @@
 # for more details.
 #
 #
+
+# Sanitizer runtimes are unavailable and cannot be linked here.
 KASAN_SANITIZE			:= n
+KCSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
 
 subdir- := rm
diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index b11ec5d8f8ac..83f1b6a56449 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -6,7 +6,10 @@
 # for more details.
 #
 #
+
+# Sanitizer runtimes are unavailable and cannot be linked here.
 KASAN_SANITIZE			:= n
+KCSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
 
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 8fb8a50a28b4..f2adb63b2d7c 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -93,6 +93,7 @@ asmlinkage __visible void cpu_bringup_and_idle(void)
 	cpu_bringup();
 	boot_init_stack_canary();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+	prevent_tail_call_optimization();
 }
 
 void xen_smp_intr_free_pv(unsigned int cpu)
diff --git a/arch/xtensa/kernel/syscalls/syscall.tbl b/arch/xtensa/kernel/syscalls/syscall.tbl
index 85a9ab1bc04d..165cae047770 100644
--- a/arch/xtensa/kernel/syscalls/syscall.tbl
+++ b/arch/xtensa/kernel/syscalls/syscall.tbl
@@ -408,3 +408,4 @@
 435	common	clone3				sys_clone3
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
+439	common	process_madvise			sys_process_madvise
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index 0976e27b8d5d..1671fbb816fa 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -479,25 +479,29 @@ void show_regs(struct pt_regs * regs)
 
 static int show_trace_cb(struct stackframe *frame, void *data)
 {
+	const char *loglvl = data;
+
 	if (kernel_text_address(frame->pc))
-		pr_cont(" [<%08lx>] %pB\n", frame->pc, (void *)frame->pc);
+		printk("%s [<%08lx>] %pB\n",
+			loglvl, frame->pc, (void *)frame->pc);
 	return 0;
 }
 
-void show_trace(struct task_struct *task, unsigned long *sp)
+static void show_trace(struct task_struct *task, unsigned long *sp,
+		       const char *loglvl)
 {
 	if (!sp)
 		sp = stack_pointer(task);
 
-	pr_info("Call Trace:\n");
-	walk_stackframe(sp, show_trace_cb, NULL);
+	printk("%sCall Trace:\n", loglvl);
+	walk_stackframe(sp, show_trace_cb, (void *)loglvl);
 }
 
 #define STACK_DUMP_ENTRY_SIZE 4
 #define STACK_DUMP_LINE_SIZE 32
 static size_t kstack_depth_to_print = CONFIG_PRINT_STACK_DEPTH;
 
-void show_stack(struct task_struct *task, unsigned long *sp)
+void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
 {
 	size_t len;
 
@@ -507,11 +511,11 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 	len = min((-(size_t)sp) & (THREAD_SIZE - STACK_DUMP_ENTRY_SIZE),
 		  kstack_depth_to_print * STACK_DUMP_ENTRY_SIZE);
 
-	pr_info("Stack:\n");
-	print_hex_dump(KERN_INFO, " ", DUMP_PREFIX_NONE,
+	printk("%sStack:\n", loglvl);
+	print_hex_dump(loglvl, " ", DUMP_PREFIX_NONE,
 		       STACK_DUMP_LINE_SIZE, STACK_DUMP_ENTRY_SIZE,
 		       sp, len, false);
-	show_trace(task, sp);
+	show_trace(task, stack, loglvl);
 }
 
 DEFINE_SPINLOCK(die_lock);
@@ -530,7 +534,7 @@ void die(const char * str, struct pt_regs * regs, long err)
 	pr_info("%s: sig: %ld [#%d]%s\n", str, err, ++die_counter, pr);
 	show_regs(regs);
 	if (!user_mode(regs))
-		show_stack(NULL, (unsigned long*)regs->areg[1]);
+		show_stack(NULL, (unsigned long *)regs->areg[1], KERN_INFO);
 
 	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
 	spin_unlock_irq(&die_lock);
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 19c625e6d81f..a05b306cf371 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -70,13 +70,13 @@ void __init bootmem_init(void)
 void __init zones_init(void)
 {
 	/* All pages are DMA-able, so we put them all in the DMA zone. */
-	unsigned long zones_size[MAX_NR_ZONES] = {
-		[ZONE_NORMAL] = max_low_pfn - ARCH_PFN_OFFSET,
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = {
+		[ZONE_NORMAL] = max_low_pfn,
 #ifdef CONFIG_HIGHMEM
-		[ZONE_HIGHMEM] = max_pfn - max_low_pfn,
+		[ZONE_HIGHMEM] = max_pfn,
 #endif
 	};
-	free_area_init_node(0, zones_size, ARCH_PFN_OFFSET, NULL);
+	free_area_init(max_zone_pfn);
 }
 
 #ifdef CONFIG_HIGHMEM
diff --git a/block/blk-core.c b/block/blk-core.c
index 7e4a1da0715e..dccdae09b7b6 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -20,6 +20,7 @@
 #include <linux/blk-mq.h>
 #include <linux/highmem.h>
 #include <linux/mm.h>
+#include <linux/pagemap.h>
 #include <linux/kernel_stat.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -440,6 +441,23 @@ int blk_queue_enter(struct request_queue *q, blk_mq_req_flags_t flags)
 	}
 }
 
+static inline int bio_queue_enter(struct bio *bio)
+{
+	struct request_queue *q = bio->bi_disk->queue;
+	bool nowait = bio->bi_opf & REQ_NOWAIT;
+	int ret;
+
+	ret = blk_queue_enter(q, nowait ? BLK_MQ_REQ_NOWAIT : 0);
+	if (unlikely(ret)) {
+		if (nowait && !blk_queue_dying(q))
+			bio_wouldblock_error(bio);
+		else
+			bio_io_error(bio);
+	}
+
+	return ret;
+}
+
 void blk_queue_exit(struct request_queue *q)
 {
 	percpu_ref_put(&q->q_usage_counter);
@@ -963,12 +981,13 @@ generic_make_request_checks(struct bio *bio)
 	}
 
 	/*
-	 * Various block parts want %current->io_context and lazy ioc
-	 * allocation ends up trading a lot of pain for a small amount of
-	 * memory.  Just allocate it upfront.  This may fail and block
-	 * layer knows how to live with it.
+	 * Various block parts want %current->io_context, so allocate it up
+	 * front rather than dealing with lots of pain to allocate it only
+	 * where needed. This may fail and the block layer knows how to live
+	 * with it.
 	 */
-	create_io_context(GFP_ATOMIC, q->node);
+	if (unlikely(!current->io_context))
+		create_task_io_context(current, GFP_ATOMIC, q->node);
 
 	if (!blkcg_bio_issue_check(q, bio))
 		return false;
@@ -991,28 +1010,13 @@ generic_make_request_checks(struct bio *bio)
 }
 
 /**
- * generic_make_request - hand a buffer to its device driver for I/O
+ * generic_make_request - re-submit a bio to the block device layer for I/O
  * @bio:  The bio describing the location in memory and on the device.
  *
- * generic_make_request() is used to make I/O requests of block
- * devices. It is passed a &struct bio, which describes the I/O that needs
- * to be done.
- *
- * generic_make_request() does not return any status.  The
- * success/failure status of the request, along with notification of
- * completion, is delivered asynchronously through the bio->bi_end_io
- * function described (one day) else where.
- *
- * The caller of generic_make_request must make sure that bi_io_vec
- * are set to describe the memory buffer, and that bi_dev and bi_sector are
- * set to describe the device address, and the
- * bi_end_io and optionally bi_private are set to describe how
- * completion notification should be signaled.
- *
- * generic_make_request and the drivers it calls may use bi_next if this
- * bio happens to be merged with someone else, and may resubmit the bio to
- * a lower device by calling into generic_make_request recursively, which
- * means the bio should NOT be touched after the call to ->make_request_fn.
+ * This is a version of submit_bio() that shall only be used for I/O that is
+ * resubmitted to lower level drivers by stacking block drivers.  All file
+ * systems and other upper level users of the block layer should use
+ * submit_bio() instead.
  */
 blk_qc_t generic_make_request(struct bio *bio)
 {
@@ -1063,16 +1067,17 @@ blk_qc_t generic_make_request(struct bio *bio)
 	current->bio_list = bio_list_on_stack;
 	do {
 		struct request_queue *q = bio->bi_disk->queue;
-		blk_mq_req_flags_t flags = bio->bi_opf & REQ_NOWAIT ?
-			BLK_MQ_REQ_NOWAIT : 0;
 
-		if (likely(blk_queue_enter(q, flags) == 0)) {
+		if (likely(bio_queue_enter(bio) == 0)) {
 			struct bio_list lower, same;
 
 			/* Create a fresh bio_list for all subordinate requests */
 			bio_list_on_stack[1] = bio_list_on_stack[0];
 			bio_list_init(&bio_list_on_stack[0]);
-			ret = q->make_request_fn(q, bio);
+			if (q->make_request_fn)
+				ret = q->make_request_fn(q, bio);
+			else
+				ret = blk_mq_make_request(q, bio);
 
 			blk_queue_exit(q);
 
@@ -1090,12 +1095,6 @@ blk_qc_t generic_make_request(struct bio *bio)
 			bio_list_merge(&bio_list_on_stack[0], &lower);
 			bio_list_merge(&bio_list_on_stack[0], &same);
 			bio_list_merge(&bio_list_on_stack[0], &bio_list_on_stack[1]);
-		} else {
-			if (unlikely(!blk_queue_dying(q) &&
-					(bio->bi_opf & REQ_NOWAIT)))
-				bio_wouldblock_error(bio);
-			else
-				bio_io_error(bio);
 		}
 		bio = bio_list_pop(&bio_list_on_stack[0]);
 	} while (bio);
@@ -1112,28 +1111,22 @@ EXPORT_SYMBOL(generic_make_request);
  *
  * This function behaves like generic_make_request(), but does not protect
  * against recursion.  Must only be used if the called driver is known
- * to not call generic_make_request (or direct_make_request) again from
- * its make_request function.  (Calling direct_make_request again from
- * a workqueue is perfectly fine as that doesn't recurse).
+ * to be blk-mq based.
  */
 blk_qc_t direct_make_request(struct bio *bio)
 {
 	struct request_queue *q = bio->bi_disk->queue;
-	bool nowait = bio->bi_opf & REQ_NOWAIT;
 	blk_qc_t ret;
 
+	if (WARN_ON_ONCE(q->make_request_fn)) {
+		bio_io_error(bio);
+		return BLK_QC_T_NONE;
+	}
 	if (!generic_make_request_checks(bio))
 		return BLK_QC_T_NONE;
-
-	if (unlikely(blk_queue_enter(q, nowait ? BLK_MQ_REQ_NOWAIT : 0))) {
-		if (nowait && !blk_queue_dying(q))
-			bio_wouldblock_error(bio);
-		else
-			bio_io_error(bio);
+	if (unlikely(bio_queue_enter(bio)))
 		return BLK_QC_T_NONE;
-	}
-
-	ret = q->make_request_fn(q, bio);
+	ret = blk_mq_make_request(q, bio);
 	blk_queue_exit(q);
 	return ret;
 }
@@ -1143,17 +1136,17 @@ EXPORT_SYMBOL_GPL(direct_make_request);
  * submit_bio - submit a bio to the block device layer for I/O
  * @bio: The &struct bio which describes the I/O
  *
- * submit_bio() is very similar in purpose to generic_make_request(), and
- * uses that function to do most of the work. Both are fairly rough
- * interfaces; @bio must be presetup and ready for I/O.
+ * submit_bio() is used to submit I/O requests to block devices.  It is passed a
+ * fully set up &struct bio that describes the I/O that needs to be done.  The
+ * bio will be send to the device described by the bi_disk and bi_partno fields.
  *
+ * The success/failure status of the request, along with notification of
+ * completion, is delivered asynchronously through the ->bi_end_io() callback
+ * in @bio.  The bio must NOT be touched by thecaller until ->bi_end_io() has
+ * been called.
  */
 blk_qc_t submit_bio(struct bio *bio)
 {
-	bool workingset_read = false;
-	unsigned long pflags;
-	blk_qc_t ret;
-
 	if (blkcg_punt_bio_submit(bio))
 		return BLK_QC_T_NONE;
 
@@ -1172,8 +1165,6 @@ blk_qc_t submit_bio(struct bio *bio)
 		if (op_is_write(bio_op(bio))) {
 			count_vm_events(PGPGOUT, count);
 		} else {
-			if (bio_flagged(bio, BIO_WORKINGSET))
-				workingset_read = true;
 			task_io_account_read(bio->bi_iter.bi_size);
 			count_vm_events(PGPGIN, count);
 		}
@@ -1189,20 +1180,24 @@ blk_qc_t submit_bio(struct bio *bio)
 	}
 
 	/*
-	 * If we're reading data that is part of the userspace
-	 * workingset, count submission time as memory stall. When the
-	 * device is congested, or the submitting cgroup IO-throttled,
-	 * submission can be a significant part of overall IO time.
+	 * If we're reading data that is part of the userspace workingset, count
+	 * submission time as memory stall.  When the device is congested, or
+	 * the submitting cgroup IO-throttled, submission can be a significant
+	 * part of overall IO time.
 	 */
-	if (workingset_read)
-		psi_memstall_enter(&pflags);
-
-	ret = generic_make_request(bio);
+	if (unlikely(bio_op(bio) == REQ_OP_READ &&
+	    bio_flagged(bio, BIO_WORKINGSET))) {
+		unsigned long pflags;
+		blk_qc_t ret;
 
-	if (workingset_read)
+		psi_memstall_enter(&pflags);
+		ret = generic_make_request(bio);
 		psi_memstall_leave(&pflags);
 
-	return ret;
+		return ret;
+	}
+
+	return generic_make_request(bio);
 }
 EXPORT_SYMBOL(submit_bio);
 
@@ -1638,7 +1633,6 @@ int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
 	}
 	rq->nr_phys_segments = rq_src->nr_phys_segments;
 	rq->ioprio = rq_src->ioprio;
-	rq->extra_len = rq_src->extra_len;
 
 	return 0;
 
diff --git a/block/blk-map.c b/block/blk-map.c
index b72c361911a4..b6fa343fea9f 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -654,8 +654,6 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
 			bio = rq->bio;
 	} while (iov_iter_count(&i));
 
-	if (!bio_flagged(bio, BIO_USER_MAPPED))
-		rq->rq_flags |= RQF_COPY_USER;
 	return 0;
 
 unmap_rq:
@@ -731,7 +729,6 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 {
 	int reading = rq_data_dir(rq) == READ;
 	unsigned long addr = (unsigned long) kbuf;
-	int do_copy = 0;
 	struct bio *bio, *orig_bio;
 	int ret;
 
@@ -740,8 +737,7 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 	if (!len || !kbuf)
 		return -EINVAL;
 
-	do_copy = !blk_rq_aligned(q, addr, len) || object_is_on_stack(kbuf);
-	if (do_copy)
+	if (!blk_rq_aligned(q, addr, len) || object_is_on_stack(kbuf))
 		bio = bio_copy_kern(q, kbuf, len, gfp_mask, reading);
 	else
 		bio = bio_map_kern(q, kbuf, len, gfp_mask);
@@ -752,9 +748,6 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 	bio->bi_opf &= ~REQ_OP_MASK;
 	bio->bi_opf |= req_op(rq);
 
-	if (do_copy)
-		rq->rq_flags |= RQF_COPY_USER;
-
 	orig_bio = bio;
 	ret = blk_rq_append_bio(rq, &bio);
 	if (unlikely(ret)) {
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 1534ed736363..a04e991b5ded 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -336,16 +336,6 @@ void __blk_queue_split(struct request_queue *q, struct bio **bio,
 		/* there isn't chance to merge the splitted bio */
 		split->bi_opf |= REQ_NOMERGE;
 
-		/*
-		 * Since we're recursing into make_request here, ensure
-		 * that we mark this bio as already having entered the queue.
-		 * If not, and the queue is going away, we can get stuck
-		 * forever on waiting for the queue reference to drop. But
-		 * that will never happen, as we're already holding a
-		 * reference to it.
-		 */
-		bio_set_flag(*bio, BIO_QUEUE_ENTERED);
-
 		bio_chain(split, *bio);
 		trace_block_split(q, split, (*bio)->bi_iter.bi_sector);
 		generic_make_request(*bio);
@@ -519,44 +509,20 @@ static int __blk_bios_map_sg(struct request_queue *q, struct bio *bio,
  * map a request to scatterlist, return number of sg entries setup. Caller
  * must make sure sg can hold rq->nr_phys_segments entries
  */
-int blk_rq_map_sg(struct request_queue *q, struct request *rq,
-		  struct scatterlist *sglist)
+int __blk_rq_map_sg(struct request_queue *q, struct request *rq,
+		struct scatterlist *sglist, struct scatterlist **last_sg)
 {
-	struct scatterlist *sg = NULL;
 	int nsegs = 0;
 
 	if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
-		nsegs = __blk_bvec_map_sg(rq->special_vec, sglist, &sg);
+		nsegs = __blk_bvec_map_sg(rq->special_vec, sglist, last_sg);
 	else if (rq->bio && bio_op(rq->bio) == REQ_OP_WRITE_SAME)
-		nsegs = __blk_bvec_map_sg(bio_iovec(rq->bio), sglist, &sg);
+		nsegs = __blk_bvec_map_sg(bio_iovec(rq->bio), sglist, last_sg);
 	else if (rq->bio)
-		nsegs = __blk_bios_map_sg(q, rq->bio, sglist, &sg);
-
-	if (unlikely(rq->rq_flags & RQF_COPY_USER) &&
-	    (blk_rq_bytes(rq) & q->dma_pad_mask)) {
-		unsigned int pad_len =
-			(q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1;
-
-		sg->length += pad_len;
-		rq->extra_len += pad_len;
-	}
-
-	if (q->dma_drain_size && q->dma_drain_needed(rq)) {
-		if (op_is_write(req_op(rq)))
-			memset(q->dma_drain_buffer, 0, q->dma_drain_size);
-
-		sg_unmark_end(sg);
-		sg = sg_next(sg);
-		sg_set_page(sg, virt_to_page(q->dma_drain_buffer),
-			    q->dma_drain_size,
-			    ((unsigned long)q->dma_drain_buffer) &
-			    (PAGE_SIZE - 1));
-		nsegs++;
-		rq->extra_len += q->dma_drain_size;
-	}
+		nsegs = __blk_bios_map_sg(q, rq->bio, sglist, last_sg);
 
-	if (sg)
-		sg_mark_end(sg);
+	if (*last_sg)
+		sg_mark_end(*last_sg);
 
 	/*
 	 * Something must have been wrong if the figured number of
@@ -566,7 +532,7 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq,
 
 	return nsegs;
 }
-EXPORT_SYMBOL(blk_rq_map_sg);
+EXPORT_SYMBOL(__blk_rq_map_sg);
 
 static inline int ll_new_hw_segment(struct request *req, struct bio *bio,
 		unsigned int nr_phys_segs)
diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
index b3f2ba483992..96b7a35c898a 100644
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -292,7 +292,6 @@ static const char *const rqf_name[] = {
 	RQF_NAME(MQ_INFLIGHT),
 	RQF_NAME(DONTPREP),
 	RQF_NAME(PREEMPT),
-	RQF_NAME(COPY_USER),
 	RQF_NAME(FAILED),
 	RQF_NAME(QUIET),
 	RQF_NAME(ELVPRIV),
diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
index 74cedea56034..fdcc2c1dd178 100644
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -80,16 +80,22 @@ void blk_mq_sched_restart(struct blk_mq_hw_ctx *hctx)
 	blk_mq_run_hw_queue(hctx, true);
 }
 
+#define BLK_MQ_BUDGET_DELAY	3		/* ms units */
+
 /*
  * Only SCSI implements .get_budget and .put_budget, and SCSI restarts
  * its queue by itself in its completion handler, so we don't need to
  * restart queue if .get_budget() returns BLK_STS_NO_RESOURCE.
+ *
+ * Returns -EAGAIN if hctx->dispatch was found non-empty and run_work has to
+ * be run again.  This is necessary to avoid starving flushes.
  */
-static void blk_mq_do_dispatch_sched(struct blk_mq_hw_ctx *hctx)
+static int blk_mq_do_dispatch_sched(struct blk_mq_hw_ctx *hctx)
 {
 	struct request_queue *q = hctx->queue;
 	struct elevator_queue *e = q->elevator;
 	LIST_HEAD(rq_list);
+	int ret = 0;
 
 	do {
 		struct request *rq;
@@ -97,12 +103,25 @@ static void blk_mq_do_dispatch_sched(struct blk_mq_hw_ctx *hctx)
 		if (e->type->ops.has_work && !e->type->ops.has_work(hctx))
 			break;
 
+		if (!list_empty_careful(&hctx->dispatch)) {
+			ret = -EAGAIN;
+			break;
+		}
+
 		if (!blk_mq_get_dispatch_budget(hctx))
 			break;
 
 		rq = e->type->ops.dispatch_request(hctx);
 		if (!rq) {
 			blk_mq_put_dispatch_budget(hctx);
+			/*
+			 * We're releasing without dispatching. Holding the
+			 * budget could have blocked any "hctx"s with the
+			 * same queue and if we didn't dispatch then there's
+			 * no guarantee anyone will kick the queue.  Kick it
+			 * ourselves.
+			 */
+			blk_mq_delay_run_hw_queues(q, BLK_MQ_BUDGET_DELAY);
 			break;
 		}
 
@@ -113,6 +132,8 @@ static void blk_mq_do_dispatch_sched(struct blk_mq_hw_ctx *hctx)
 		 */
 		list_add(&rq->queuelist, &rq_list);
 	} while (blk_mq_dispatch_rq_list(q, &rq_list, true));
+
+	return ret;
 }
 
 static struct blk_mq_ctx *blk_mq_next_ctx(struct blk_mq_hw_ctx *hctx,
@@ -130,16 +151,25 @@ static struct blk_mq_ctx *blk_mq_next_ctx(struct blk_mq_hw_ctx *hctx,
  * Only SCSI implements .get_budget and .put_budget, and SCSI restarts
  * its queue by itself in its completion handler, so we don't need to
  * restart queue if .get_budget() returns BLK_STS_NO_RESOURCE.
+ *
+ * Returns -EAGAIN if hctx->dispatch was found non-empty and run_work has to
+ * to be run again.  This is necessary to avoid starving flushes.
  */
-static void blk_mq_do_dispatch_ctx(struct blk_mq_hw_ctx *hctx)
+static int blk_mq_do_dispatch_ctx(struct blk_mq_hw_ctx *hctx)
 {
 	struct request_queue *q = hctx->queue;
 	LIST_HEAD(rq_list);
 	struct blk_mq_ctx *ctx = READ_ONCE(hctx->dispatch_from);
+	int ret = 0;
 
 	do {
 		struct request *rq;
 
+		if (!list_empty_careful(&hctx->dispatch)) {
+			ret = -EAGAIN;
+			break;
+		}
+
 		if (!sbitmap_any_bit_set(&hctx->ctx_map))
 			break;
 
@@ -149,6 +179,14 @@ static void blk_mq_do_dispatch_ctx(struct blk_mq_hw_ctx *hctx)
 		rq = blk_mq_dequeue_from_ctx(hctx, ctx);
 		if (!rq) {
 			blk_mq_put_dispatch_budget(hctx);
+			/*
+			 * We're releasing without dispatching. Holding the
+			 * budget could have blocked any "hctx"s with the
+			 * same queue and if we didn't dispatch then there's
+			 * no guarantee anyone will kick the queue.  Kick it
+			 * ourselves.
+			 */
+			blk_mq_delay_run_hw_queues(q, BLK_MQ_BUDGET_DELAY);
 			break;
 		}
 
@@ -165,21 +203,17 @@ static void blk_mq_do_dispatch_ctx(struct blk_mq_hw_ctx *hctx)
 	} while (blk_mq_dispatch_rq_list(q, &rq_list, true));
 
 	WRITE_ONCE(hctx->dispatch_from, ctx);
+	return ret;
 }
 
-void blk_mq_sched_dispatch_requests(struct blk_mq_hw_ctx *hctx)
+static int __blk_mq_sched_dispatch_requests(struct blk_mq_hw_ctx *hctx)
 {
 	struct request_queue *q = hctx->queue;
 	struct elevator_queue *e = q->elevator;
 	const bool has_sched_dispatch = e && e->type->ops.dispatch_request;
+	int ret = 0;
 	LIST_HEAD(rq_list);
 
-	/* RCU or SRCU read lock is needed before checking quiesced flag */
-	if (unlikely(blk_mq_hctx_stopped(hctx) || blk_queue_quiesced(q)))
-		return;
-
-	hctx->run++;
-
 	/*
 	 * If we have previous entries on our dispatch list, grab them first for
 	 * more fair dispatch.
@@ -208,19 +242,41 @@ void blk_mq_sched_dispatch_requests(struct blk_mq_hw_ctx *hctx)
 		blk_mq_sched_mark_restart_hctx(hctx);
 		if (blk_mq_dispatch_rq_list(q, &rq_list, false)) {
 			if (has_sched_dispatch)
-				blk_mq_do_dispatch_sched(hctx);
+				ret = blk_mq_do_dispatch_sched(hctx);
 			else
-				blk_mq_do_dispatch_ctx(hctx);
+				ret = blk_mq_do_dispatch_ctx(hctx);
 		}
 	} else if (has_sched_dispatch) {
-		blk_mq_do_dispatch_sched(hctx);
+		ret = blk_mq_do_dispatch_sched(hctx);
 	} else if (hctx->dispatch_busy) {
 		/* dequeue request one by one from sw queue if queue is busy */
-		blk_mq_do_dispatch_ctx(hctx);
+		ret = blk_mq_do_dispatch_ctx(hctx);
 	} else {
 		blk_mq_flush_busy_ctxs(hctx, &rq_list);
 		blk_mq_dispatch_rq_list(q, &rq_list, false);
 	}
+
+	return ret;
+}
+
+void blk_mq_sched_dispatch_requests(struct blk_mq_hw_ctx *hctx)
+{
+	struct request_queue *q = hctx->queue;
+
+	/* RCU or SRCU read lock is needed before checking quiesced flag */
+	if (unlikely(blk_mq_hctx_stopped(hctx) || blk_queue_quiesced(q)))
+		return;
+
+	hctx->run++;
+
+	/*
+	 * A return of -EAGAIN is an indication that hctx->dispatch is not
+	 * empty and we must run again in order to avoid starving flushes.
+	 */
+	if (__blk_mq_sched_dispatch_requests(hctx) == -EAGAIN) {
+		if (__blk_mq_sched_dispatch_requests(hctx) == -EAGAIN)
+			blk_mq_run_hw_queue(hctx, true);
+	}
 }
 
 bool blk_mq_sched_try_merge(struct request_queue *q, struct bio *bio,
diff --git a/block/blk-mq.c b/block/blk-mq.c
index a7785df2c944..bcc3a2397d4a 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -318,7 +318,6 @@ static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data,
 	rq->nr_integrity_segments = 0;
 #endif
 	/* tag was already set */
-	rq->extra_len = 0;
 	WRITE_ONCE(rq->deadline, 0);
 
 	rq->timeout = 0;
@@ -667,15 +666,6 @@ void blk_mq_start_request(struct request *rq)
 	blk_add_timer(rq);
 	WRITE_ONCE(rq->state, MQ_RQ_IN_FLIGHT);
 
-	if (q->dma_drain_size && blk_rq_bytes(rq)) {
-		/*
-		 * Make sure space for the drain appears.  We know we can do
-		 * this because max_hw_segments has been adjusted to be one
-		 * fewer than the device can handle.
-		 */
-		rq->nr_phys_segments++;
-	}
-
 #ifdef CONFIG_BLK_DEV_INTEGRITY
 	if (blk_integrity_rq(rq) && req_op(rq) == REQ_OP_WRITE)
 		q->integrity.profile->prepare_fn(rq);
@@ -695,8 +685,6 @@ static void __blk_mq_requeue_request(struct request *rq)
 	if (blk_mq_request_started(rq)) {
 		WRITE_ONCE(rq->state, MQ_RQ_IDLE);
 		rq->rq_flags &= ~RQF_TIMED_OUT;
-		if (q->dma_drain_size && blk_rq_bytes(rq))
-			rq->nr_phys_segments--;
 	}
 }
 
@@ -1206,6 +1194,7 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
 	bool no_tag = false;
 	int errors, queued;
 	blk_status_t ret = BLK_STS_OK;
+	bool no_budget_avail = false;
 
 	if (list_empty(list))
 		return false;
@@ -1224,6 +1213,7 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
 		hctx = rq->mq_hctx;
 		if (!got_budget && !blk_mq_get_dispatch_budget(hctx)) {
 			blk_mq_put_driver_tag(rq);
+			no_budget_avail = true;
 			break;
 		}
 
@@ -1320,13 +1310,15 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
 		 *
 		 * If driver returns BLK_STS_RESOURCE and SCHED_RESTART
 		 * bit is set, run queue after a delay to avoid IO stalls
-		 * that could otherwise occur if the queue is idle.
+		 * that could otherwise occur if the queue is idle.  We'll do
+		 * similar if we couldn't get budget and SCHED_RESTART is set.
 		 */
 		needs_restart = blk_mq_sched_needs_restart(hctx);
 		if (!needs_restart ||
 		    (no_tag && list_empty_careful(&hctx->dispatch_wait.entry)))
 			blk_mq_run_hw_queue(hctx, true);
-		else if (needs_restart && (ret == BLK_STS_RESOURCE))
+		else if (needs_restart && (ret == BLK_STS_RESOURCE ||
+					   no_budget_avail))
 			blk_mq_delay_run_hw_queue(hctx, BLK_MQ_RESOURCE_DELAY);
 
 		blk_mq_update_dispatch_busy(hctx, true);
@@ -1541,6 +1533,25 @@ void blk_mq_run_hw_queues(struct request_queue *q, bool async)
 }
 EXPORT_SYMBOL(blk_mq_run_hw_queues);
 
+/**
+ * blk_mq_delay_run_hw_queues - Run all hardware queues asynchronously.
+ * @q: Pointer to the request queue to run.
+ * @msecs: Microseconds of delay to wait before running the queues.
+ */
+void blk_mq_delay_run_hw_queues(struct request_queue *q, unsigned long msecs)
+{
+	struct blk_mq_hw_ctx *hctx;
+	int i;
+
+	queue_for_each_hw_ctx(q, hctx, i) {
+		if (blk_mq_hctx_stopped(hctx))
+			continue;
+
+		blk_mq_delay_run_hw_queue(hctx, msecs);
+	}
+}
+EXPORT_SYMBOL(blk_mq_delay_run_hw_queues);
+
 /**
  * blk_mq_queue_stopped() - check whether one or more hctxs have been stopped
  * @q: request queue.
@@ -1973,7 +1984,7 @@ static void blk_add_rq_to_plug(struct blk_plug *plug, struct request *rq)
  *
  * Returns: Request queue cookie.
  */
-static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
+blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
 {
 	const int is_sync = op_is_sync(bio->bi_opf);
 	const int is_flush_fua = op_is_flush(bio->bi_opf);
@@ -2085,6 +2096,7 @@ static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
 
 	return cookie;
 }
+EXPORT_SYMBOL_GPL(blk_mq_make_request); /* only for request based dm */
 
 void blk_mq_free_rqs(struct blk_mq_tag_set *set, struct blk_mq_tags *tags,
 		     unsigned int hctx_idx)
@@ -2944,7 +2956,6 @@ struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
 	INIT_LIST_HEAD(&q->requeue_list);
 	spin_lock_init(&q->requeue_lock);
 
-	q->make_request_fn = blk_mq_make_request;
 	q->nr_requests = set->queue_depth;
 
 	/*
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 14397b4c4b53..2ab1967b9716 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -651,43 +651,6 @@ void blk_queue_update_dma_pad(struct request_queue *q, unsigned int mask)
 }
 EXPORT_SYMBOL(blk_queue_update_dma_pad);
 
-/**
- * blk_queue_dma_drain - Set up a drain buffer for excess dma.
- * @q:  the request queue for the device
- * @dma_drain_needed: fn which returns non-zero if drain is necessary
- * @buf:	physically contiguous buffer
- * @size:	size of the buffer in bytes
- *
- * Some devices have excess DMA problems and can't simply discard (or
- * zero fill) the unwanted piece of the transfer.  They have to have a
- * real area of memory to transfer it into.  The use case for this is
- * ATAPI devices in DMA mode.  If the packet command causes a transfer
- * bigger than the transfer size some HBAs will lock up if there
- * aren't DMA elements to contain the excess transfer.  What this API
- * does is adjust the queue so that the buf is always appended
- * silently to the scatterlist.
- *
- * Note: This routine adjusts max_hw_segments to make room for appending
- * the drain buffer.  If you call blk_queue_max_segments() after calling
- * this routine, you must set the limit to one fewer than your device
- * can support otherwise there won't be room for the drain buffer.
- */
-int blk_queue_dma_drain(struct request_queue *q,
-			       dma_drain_needed_fn *dma_drain_needed,
-			       void *buf, unsigned int size)
-{
-	if (queue_max_segments(q) < 2)
-		return -EINVAL;
-	/* make room for appending the drain */
-	blk_queue_max_segments(q, queue_max_segments(q) - 1);
-	q->dma_drain_needed = dma_drain_needed;
-	q->dma_drain_buffer = buf;
-	q->dma_drain_size = size;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(blk_queue_dma_drain);
-
 /**
  * blk_queue_segment_boundary - set boundary rules for segment merging
  * @q:  the request queue for the device
diff --git a/block/blk.h b/block/blk.h
index 0a94ec68af32..73bd3b1c6938 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -303,26 +303,6 @@ void ioc_clear_queue(struct request_queue *q);
 
 int create_task_io_context(struct task_struct *task, gfp_t gfp_mask, int node);
 
-/**
- * create_io_context - try to create task->io_context
- * @gfp_mask: allocation mask
- * @node: allocation node
- *
- * If %current->io_context is %NULL, allocate a new io_context and install
- * it.  Returns the current %current->io_context which may be %NULL if
- * allocation failed.
- *
- * Note that this function can't be called with IRQ disabled because
- * task_lock which protects %current->io_context is IRQ-unsafe.
- */
-static inline struct io_context *create_io_context(gfp_t gfp_mask, int node)
-{
-	WARN_ON_ONCE(irqs_disabled());
-	if (unlikely(!current->io_context))
-		create_task_io_context(current, gfp_mask, node);
-	return current->io_context;
-}
-
 /*
  * Internal throttling interface
  */
@@ -389,20 +369,14 @@ char *disk_name(struct gendisk *hd, int partno, char *buf);
 #define ADDPART_FLAG_NONE	0
 #define ADDPART_FLAG_RAID	1
 #define ADDPART_FLAG_WHOLEDISK	2
-struct hd_struct *__must_check add_partition(struct gendisk *disk, int partno,
-		sector_t start, sector_t len, int flags,
-		struct partition_meta_info *info);
-void __delete_partition(struct percpu_ref *ref);
-void delete_partition(struct gendisk *disk, int partno);
+void delete_partition(struct gendisk *disk, struct hd_struct *part);
+int bdev_add_partition(struct block_device *bdev, int partno,
+		sector_t start, sector_t length);
+int bdev_del_partition(struct block_device *bdev, int partno);
+int bdev_resize_partition(struct block_device *bdev, int partno,
+		sector_t start, sector_t length);
 int disk_expand_part_tbl(struct gendisk *disk, int target);
-
-static inline int hd_ref_init(struct hd_struct *part)
-{
-	if (percpu_ref_init(&part->ref, __delete_partition, 0,
-				GFP_KERNEL))
-		return -ENOMEM;
-	return 0;
-}
+int hd_ref_init(struct hd_struct *part);
 
 static inline void hd_struct_get(struct hd_struct *part)
 {
@@ -419,11 +393,6 @@ static inline void hd_struct_put(struct hd_struct *part)
 	percpu_ref_put(&part->ref);
 }
 
-static inline void hd_struct_kill(struct hd_struct *part)
-{
-	percpu_ref_kill(&part->ref);
-}
-
 static inline void hd_free_part(struct hd_struct *part)
 {
 	free_part_stats(part);
diff --git a/block/genhd.c b/block/genhd.c
index 06b642b23a07..c05d509877fa 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -878,6 +878,25 @@ void device_add_disk_no_queue_reg(struct device *parent, struct gendisk *disk)
 }
 EXPORT_SYMBOL(device_add_disk_no_queue_reg);
 
+static void invalidate_partition(struct gendisk *disk, int partno)
+{
+	struct block_device *bdev;
+
+	bdev = bdget_disk(disk, partno);
+	if (!bdev)
+		return;
+
+	fsync_bdev(bdev);
+	__invalidate_device(bdev, true);
+
+	/*
+	 * Unhash the bdev inode for this device so that it gets evicted as soon
+	 * as last inode reference is dropped.
+	 */
+	remove_inode_hash(bdev->bd_inode);
+	bdput(bdev);
+}
+
 void del_gendisk(struct gendisk *disk)
 {
 	struct disk_part_iter piter;
@@ -896,13 +915,11 @@ void del_gendisk(struct gendisk *disk)
 			     DISK_PITER_INCL_EMPTY | DISK_PITER_REVERSE);
 	while ((part = disk_part_iter_next(&piter))) {
 		invalidate_partition(disk, part->partno);
-		bdev_unhash_inode(part_devt(part));
-		delete_partition(disk, part->partno);
+		delete_partition(disk, part);
 	}
 	disk_part_iter_exit(&piter);
 
 	invalidate_partition(disk, 0);
-	bdev_unhash_inode(disk_devt(disk));
 	set_capacity(disk, 0);
 	disk->flags &= ~GENHD_FL_UP;
 	up_write(&disk->lookup_sem);
@@ -1806,20 +1823,6 @@ int bdev_read_only(struct block_device *bdev)
 
 EXPORT_SYMBOL(bdev_read_only);
 
-int invalidate_partition(struct gendisk *disk, int partno)
-{
-	int res = 0;
-	struct block_device *bdev = bdget_disk(disk, partno);
-	if (bdev) {
-		fsync_bdev(bdev);
-		res = __invalidate_device(bdev, true);
-		bdput(bdev);
-	}
-	return res;
-}
-
-EXPORT_SYMBOL(invalidate_partition);
-
 /*
  * Disk events - monitor disk events like media change and eject request.
  */
diff --git a/block/ioctl.c b/block/ioctl.c
index 6e827de1a4c4..75c64811b534 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -16,142 +16,44 @@
 static int blkpg_do_ioctl(struct block_device *bdev,
 			  struct blkpg_partition __user *upart, int op)
 {
-	struct block_device *bdevp;
-	struct gendisk *disk;
-	struct hd_struct *part, *lpart;
 	struct blkpg_partition p;
-	struct disk_part_iter piter;
 	long long start, length;
-	int partno;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 	if (copy_from_user(&p, upart, sizeof(struct blkpg_partition)))
 		return -EFAULT;
-	disk = bdev->bd_disk;
 	if (bdev != bdev->bd_contains)
 		return -EINVAL;
-	partno = p.pno;
-	if (partno <= 0)
+
+	if (p.pno <= 0)
 		return -EINVAL;
+
+	if (op == BLKPG_DEL_PARTITION)
+		return bdev_del_partition(bdev, p.pno);
+
+	start = p.start >> SECTOR_SHIFT;
+	length = p.length >> SECTOR_SHIFT;
+
+	/* check for fit in a hd_struct */
+	if (sizeof(sector_t) < sizeof(long long)) {
+		long pstart = start, plength = length;
+
+		if (pstart != start || plength != length || pstart < 0 ||
+		    plength < 0 || p.pno > 65535)
+			return -EINVAL;
+	}
+
 	switch (op) {
-		case BLKPG_ADD_PARTITION:
-			start = p.start >> 9;
-			length = p.length >> 9;
-			/* check for fit in a hd_struct */
-			if (sizeof(sector_t) == sizeof(long) &&
-			    sizeof(long long) > sizeof(long)) {
-				long pstart = start, plength = length;
-				if (pstart != start || plength != length
-				    || pstart < 0 || plength < 0 || partno > 65535)
-					return -EINVAL;
-			}
-			/* check if partition is aligned to blocksize */
-			if (p.start & (bdev_logical_block_size(bdev) - 1))
-				return -EINVAL;
-
-			mutex_lock(&bdev->bd_mutex);
-
-			/* overlap? */
-			disk_part_iter_init(&piter, disk,
-					    DISK_PITER_INCL_EMPTY);
-			while ((part = disk_part_iter_next(&piter))) {
-				if (!(start + length <= part->start_sect ||
-				      start >= part->start_sect + part->nr_sects)) {
-					disk_part_iter_exit(&piter);
-					mutex_unlock(&bdev->bd_mutex);
-					return -EBUSY;
-				}
-			}
-			disk_part_iter_exit(&piter);
-
-			/* all seems OK */
-			part = add_partition(disk, partno, start, length,
-					     ADDPART_FLAG_NONE, NULL);
-			mutex_unlock(&bdev->bd_mutex);
-			return PTR_ERR_OR_ZERO(part);
-		case BLKPG_DEL_PARTITION:
-			part = disk_get_part(disk, partno);
-			if (!part)
-				return -ENXIO;
-
-			bdevp = bdget(part_devt(part));
-			disk_put_part(part);
-			if (!bdevp)
-				return -ENOMEM;
-
-			mutex_lock(&bdevp->bd_mutex);
-			if (bdevp->bd_openers) {
-				mutex_unlock(&bdevp->bd_mutex);
-				bdput(bdevp);
-				return -EBUSY;
-			}
-			/* all seems OK */
-			fsync_bdev(bdevp);
-			invalidate_bdev(bdevp);
-
-			mutex_lock_nested(&bdev->bd_mutex, 1);
-			delete_partition(disk, partno);
-			mutex_unlock(&bdev->bd_mutex);
-			mutex_unlock(&bdevp->bd_mutex);
-			bdput(bdevp);
-
-			return 0;
-		case BLKPG_RESIZE_PARTITION:
-			start = p.start >> 9;
-			/* new length of partition in bytes */
-			length = p.length >> 9;
-			/* check for fit in a hd_struct */
-			if (sizeof(sector_t) == sizeof(long) &&
-			    sizeof(long long) > sizeof(long)) {
-				long pstart = start, plength = length;
-				if (pstart != start || plength != length
-				    || pstart < 0 || plength < 0)
-					return -EINVAL;
-			}
-			part = disk_get_part(disk, partno);
-			if (!part)
-				return -ENXIO;
-			bdevp = bdget(part_devt(part));
-			if (!bdevp) {
-				disk_put_part(part);
-				return -ENOMEM;
-			}
-			mutex_lock(&bdevp->bd_mutex);
-			mutex_lock_nested(&bdev->bd_mutex, 1);
-			if (start != part->start_sect) {
-				mutex_unlock(&bdevp->bd_mutex);
-				mutex_unlock(&bdev->bd_mutex);
-				bdput(bdevp);
-				disk_put_part(part);
-				return -EINVAL;
-			}
-			/* overlap? */
-			disk_part_iter_init(&piter, disk,
-					    DISK_PITER_INCL_EMPTY);
-			while ((lpart = disk_part_iter_next(&piter))) {
-				if (lpart->partno != partno &&
-				   !(start + length <= lpart->start_sect ||
-				   start >= lpart->start_sect + lpart->nr_sects)
-				   ) {
-					disk_part_iter_exit(&piter);
-					mutex_unlock(&bdevp->bd_mutex);
-					mutex_unlock(&bdev->bd_mutex);
-					bdput(bdevp);
-					disk_put_part(part);
-					return -EBUSY;
-				}
-			}
-			disk_part_iter_exit(&piter);
-			part_nr_sects_write(part, (sector_t)length);
-			i_size_write(bdevp->bd_inode, p.length);
-			mutex_unlock(&bdevp->bd_mutex);
-			mutex_unlock(&bdev->bd_mutex);
-			bdput(bdevp);
-			disk_put_part(part);
-			return 0;
-		default:
+	case BLKPG_ADD_PARTITION:
+		/* check if partition is aligned to blocksize */
+		if (p.start & (bdev_logical_block_size(bdev) - 1))
 			return -EINVAL;
+		return bdev_add_partition(bdev, p.pno, start, length);
+	case BLKPG_RESIZE_PARTITION:
+		return bdev_resize_partition(bdev, p.pno, start, length);
+	default:
+		return -EINVAL;
 	}
 }
 
diff --git a/block/partitions/core.c b/block/partitions/core.c
index bc1ded1331b1..c085bf85509b 100644
--- a/block/partitions/core.c
+++ b/block/partitions/core.c
@@ -274,10 +274,10 @@ struct device_type part_type = {
 	.uevent		= part_uevent,
 };
 
-static void delete_partition_work_fn(struct work_struct *work)
+static void hd_struct_free_work(struct work_struct *work)
 {
-	struct hd_struct *part = container_of(to_rcu_work(work), struct hd_struct,
-					rcu_work);
+	struct hd_struct *part =
+		container_of(to_rcu_work(work), struct hd_struct, rcu_work);
 
 	part->start_sect = 0;
 	part->nr_sects = 0;
@@ -285,31 +285,31 @@ static void delete_partition_work_fn(struct work_struct *work)
 	put_device(part_to_dev(part));
 }
 
-void __delete_partition(struct percpu_ref *ref)
+static void hd_struct_free(struct percpu_ref *ref)
 {
 	struct hd_struct *part = container_of(ref, struct hd_struct, ref);
-	INIT_RCU_WORK(&part->rcu_work, delete_partition_work_fn);
+
+	INIT_RCU_WORK(&part->rcu_work, hd_struct_free_work);
 	queue_rcu_work(system_wq, &part->rcu_work);
 }
 
+int hd_ref_init(struct hd_struct *part)
+{
+	if (percpu_ref_init(&part->ref, hd_struct_free, 0, GFP_KERNEL))
+		return -ENOMEM;
+	return 0;
+}
+
 /*
  * Must be called either with bd_mutex held, before a disk can be opened or
  * after all disk users are gone.
  */
-void delete_partition(struct gendisk *disk, int partno)
+void delete_partition(struct gendisk *disk, struct hd_struct *part)
 {
 	struct disk_part_tbl *ptbl =
 		rcu_dereference_protected(disk->part_tbl, 1);
-	struct hd_struct *part;
 
-	if (partno >= ptbl->len)
-		return;
-
-	part = rcu_dereference_protected(ptbl->part[partno], 1);
-	if (!part)
-		return;
-
-	rcu_assign_pointer(ptbl->part[partno], NULL);
+	rcu_assign_pointer(ptbl->part[part->partno], NULL);
 	rcu_assign_pointer(ptbl->last_lookup, NULL);
 	kobject_put(part->holder_dir);
 	device_del(part_to_dev(part));
@@ -321,7 +321,7 @@ void delete_partition(struct gendisk *disk, int partno)
 	 * "in-use" until we really free the gendisk.
 	 */
 	blk_invalidate_devt(part_devt(part));
-	hd_struct_kill(part);
+	percpu_ref_kill(&part->ref);
 }
 
 static ssize_t whole_disk_show(struct device *dev,
@@ -335,7 +335,7 @@ static DEVICE_ATTR(whole_disk, 0444, whole_disk_show, NULL);
  * Must be called either with bd_mutex held, before a disk can be opened or
  * after all disk users are gone.
  */
-struct hd_struct *add_partition(struct gendisk *disk, int partno,
+static struct hd_struct *add_partition(struct gendisk *disk, int partno,
 				sector_t start, sector_t len, int flags,
 				struct partition_meta_info *info)
 {
@@ -472,6 +472,121 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
 	return ERR_PTR(err);
 }
 
+static bool partition_overlaps(struct gendisk *disk, sector_t start,
+		sector_t length, int skip_partno)
+{
+	struct disk_part_iter piter;
+	struct hd_struct *part;
+	bool overlap = false;
+
+	disk_part_iter_init(&piter, disk, DISK_PITER_INCL_EMPTY);
+	while ((part = disk_part_iter_next(&piter))) {
+		if (part->partno == skip_partno ||
+		    start >= part->start_sect + part->nr_sects ||
+		    start + length <= part->start_sect)
+			continue;
+		overlap = true;
+		break;
+	}
+
+	disk_part_iter_exit(&piter);
+	return overlap;
+}
+
+int bdev_add_partition(struct block_device *bdev, int partno,
+		sector_t start, sector_t length)
+{
+	struct hd_struct *part;
+
+	mutex_lock(&bdev->bd_mutex);
+	if (partition_overlaps(bdev->bd_disk, start, length, -1)) {
+		mutex_unlock(&bdev->bd_mutex);
+		return -EBUSY;
+	}
+
+	part = add_partition(bdev->bd_disk, partno, start, length,
+			ADDPART_FLAG_NONE, NULL);
+	mutex_unlock(&bdev->bd_mutex);
+	return PTR_ERR_OR_ZERO(part);
+}
+
+int bdev_del_partition(struct block_device *bdev, int partno)
+{
+	struct block_device *bdevp;
+	struct hd_struct *part;
+	int ret = 0;
+
+	part = disk_get_part(bdev->bd_disk, partno);
+	if (!part)
+		return -ENXIO;
+
+	ret = -ENOMEM;
+	bdevp = bdget(part_devt(part));
+	if (!bdevp)
+		goto out_put_part;
+
+	mutex_lock(&bdevp->bd_mutex);
+
+	ret = -EBUSY;
+	if (bdevp->bd_openers)
+		goto out_unlock;
+
+	sync_blockdev(bdevp);
+	invalidate_bdev(bdevp);
+
+	mutex_lock_nested(&bdev->bd_mutex, 1);
+	delete_partition(bdev->bd_disk, part);
+	mutex_unlock(&bdev->bd_mutex);
+
+	ret = 0;
+out_unlock:
+	mutex_unlock(&bdevp->bd_mutex);
+	bdput(bdevp);
+out_put_part:
+	disk_put_part(part);
+	return ret;
+}
+
+int bdev_resize_partition(struct block_device *bdev, int partno,
+		sector_t start, sector_t length)
+{
+	struct block_device *bdevp;
+	struct hd_struct *part;
+	int ret = 0;
+
+	part = disk_get_part(bdev->bd_disk, partno);
+	if (!part)
+		return -ENXIO;
+
+	ret = -ENOMEM;
+	bdevp = bdget(part_devt(part));
+	if (!bdevp)
+		goto out_put_part;
+
+	mutex_lock(&bdevp->bd_mutex);
+	mutex_lock_nested(&bdev->bd_mutex, 1);
+
+	ret = -EINVAL;
+	if (start != part->start_sect)
+		goto out_unlock;
+
+	ret = -EBUSY;
+	if (partition_overlaps(bdev->bd_disk, start, length, partno))
+		goto out_unlock;
+
+	part_nr_sects_write(part, (sector_t)length);
+	i_size_write(bdevp->bd_inode, length << SECTOR_SHIFT);
+
+	ret = 0;
+out_unlock:
+	mutex_unlock(&bdevp->bd_mutex);
+	mutex_unlock(&bdev->bd_mutex);
+	bdput(bdevp);
+out_put_part:
+	disk_put_part(part);
+	return ret;
+}
+
 static bool disk_unlock_native_capacity(struct gendisk *disk)
 {
 	const struct block_device_operations *bdops = disk->fops;
@@ -488,27 +603,30 @@ static bool disk_unlock_native_capacity(struct gendisk *disk)
 	}
 }
 
-int blk_drop_partitions(struct gendisk *disk, struct block_device *bdev)
+int blk_drop_partitions(struct block_device *bdev)
 {
 	struct disk_part_iter piter;
 	struct hd_struct *part;
-	int res;
 
-	if (!disk_part_scan_enabled(disk))
+	if (!disk_part_scan_enabled(bdev->bd_disk))
 		return 0;
 	if (bdev->bd_part_count || bdev->bd_openers > 1)
 		return -EBUSY;
-	res = invalidate_partition(disk, 0);
-	if (res)
-		return res;
 
-	disk_part_iter_init(&piter, disk, DISK_PITER_INCL_EMPTY);
+	sync_blockdev(bdev);
+	invalidate_bdev(bdev);
+
+	disk_part_iter_init(&piter, bdev->bd_disk, DISK_PITER_INCL_EMPTY);
 	while ((part = disk_part_iter_next(&piter)))
-		delete_partition(disk, part->partno);
+		delete_partition(bdev->bd_disk, part);
 	disk_part_iter_exit(&piter);
 
 	return 0;
 }
+#ifdef CONFIG_S390
+/* for historic reasons in the DASD driver */
+EXPORT_SYMBOL_GPL(blk_drop_partitions);
+#endif
 
 static bool blk_add_partition(struct gendisk *disk, struct block_device *bdev,
 		struct parsed_partitions *state, int p)
diff --git a/block/partitions/ldm.h b/block/partitions/ldm.h
index 841580af7f9b..d8d6beaa72c4 100644
--- a/block/partitions/ldm.h
+++ b/block/partitions/ldm.h
@@ -93,7 +93,7 @@ struct frag {				/* VBLK Fragment handling */
 	u8		num;		/* Total number of records */
 	u8		rec;		/* This is record number n */
 	u8		map;		/* Which portions are in use */
-	u8		data[0];
+	u8		data[];
 };
 
 /* In memory LDM database structures. */
diff --git a/crypto/algapi.c b/crypto/algapi.c
index 69605e21af92..f1e6ccaff853 100644
--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -403,7 +403,7 @@ static void crypto_wait_for_test(struct crypto_larval *larval)
 	err = wait_for_completion_killable(&larval->completion);
 	WARN_ON(err);
 	if (!err)
-		crypto_probing_notify(CRYPTO_MSG_ALG_LOADED, larval);
+		crypto_notify(CRYPTO_MSG_ALG_LOADED, larval);
 
 out:
 	crypto_larval_kill(&larval->alg);
@@ -716,17 +716,27 @@ EXPORT_SYMBOL_GPL(crypto_drop_spawn);
 
 static struct crypto_alg *crypto_spawn_alg(struct crypto_spawn *spawn)
 {
-	struct crypto_alg *alg;
+	struct crypto_alg *alg = ERR_PTR(-EAGAIN);
+	struct crypto_alg *target;
+	bool shoot = false;
 
 	down_read(&crypto_alg_sem);
-	alg = spawn->alg;
-	if (!spawn->dead && !crypto_mod_get(alg)) {
-		alg->cra_flags |= CRYPTO_ALG_DYING;
-		alg = NULL;
+	if (!spawn->dead) {
+		alg = spawn->alg;
+		if (!crypto_mod_get(alg)) {
+			target = crypto_alg_get(alg);
+			shoot = true;
+			alg = ERR_PTR(-EAGAIN);
+		}
 	}
 	up_read(&crypto_alg_sem);
 
-	return alg ?: ERR_PTR(-EAGAIN);
+	if (shoot) {
+		crypto_shoot_alg(target);
+		crypto_alg_put(target);
+	}
+
+	return alg;
 }
 
 struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type,
diff --git a/crypto/algif_rng.c b/crypto/algif_rng.c
index 22df3799a17b..087c0ad09d38 100644
--- a/crypto/algif_rng.c
+++ b/crypto/algif_rng.c
@@ -61,7 +61,7 @@ static int rng_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 	struct sock *sk = sock->sk;
 	struct alg_sock *ask = alg_sk(sk);
 	struct rng_ctx *ctx = ask->private;
-	int err = -EFAULT;
+	int err;
 	int genlen = 0;
 	u8 result[MAXSIZE];
 
diff --git a/crypto/api.c b/crypto/api.c
index 7d71a9b10e5f..edcf690800d4 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -333,12 +333,13 @@ static unsigned int crypto_ctxsize(struct crypto_alg *alg, u32 type, u32 mask)
 	return len;
 }
 
-static void crypto_shoot_alg(struct crypto_alg *alg)
+void crypto_shoot_alg(struct crypto_alg *alg)
 {
 	down_write(&crypto_alg_sem);
 	alg->cra_flags |= CRYPTO_ALG_DYING;
 	up_write(&crypto_alg_sem);
 }
+EXPORT_SYMBOL_GPL(crypto_shoot_alg);
 
 struct crypto_tfm *__crypto_alloc_tfm(struct crypto_alg *alg, u32 type,
 				      u32 mask)
diff --git a/crypto/drbg.c b/crypto/drbg.c
index b6929eb5f565..e57901d8545b 100644
--- a/crypto/drbg.c
+++ b/crypto/drbg.c
@@ -1087,10 +1087,6 @@ static void drbg_async_seed(struct work_struct *work)
 	if (ret)
 		goto unlock;
 
-	/* If nonblocking pool is initialized, deactivate Jitter RNG */
-	crypto_free_rng(drbg->jent);
-	drbg->jent = NULL;
-
 	/* Set seeded to false so that if __drbg_seed fails the
 	 * next generate call will trigger a reseed.
 	 */
@@ -1168,7 +1164,23 @@ static int drbg_seed(struct drbg_state *drbg, struct drbg_string *pers,
 						   entropylen);
 			if (ret) {
 				pr_devel("DRBG: jent failed with %d\n", ret);
-				goto out;
+
+				/*
+				 * Do not treat the transient failure of the
+				 * Jitter RNG as an error that needs to be
+				 * reported. The combined number of the
+				 * maximum reseed threshold times the maximum
+				 * number of Jitter RNG transient errors is
+				 * less than the reseed threshold required by
+				 * SP800-90A allowing us to treat the
+				 * transient errors as such.
+				 *
+				 * However, we mandate that at least the first
+				 * seeding operation must succeed with the
+				 * Jitter RNG.
+				 */
+				if (!reseed || ret != -EAGAIN)
+					goto out;
 			}
 
 			drbg_string_fill(&data1, entropy, entropylen * 2);
@@ -1492,6 +1504,8 @@ static int drbg_prepare_hrng(struct drbg_state *drbg)
 	if (list_empty(&drbg->test_data.list))
 		return 0;
 
+	drbg->jent = crypto_alloc_rng("jitterentropy_rng", 0, 0);
+
 	INIT_WORK(&drbg->seed_work, drbg_async_seed);
 
 	drbg->random_ready.owner = THIS_MODULE;
@@ -1512,8 +1526,6 @@ static int drbg_prepare_hrng(struct drbg_state *drbg)
 		return err;
 	}
 
-	drbg->jent = crypto_alloc_rng("jitterentropy_rng", 0, 0);
-
 	/*
 	 * Require frequent reseeds until the seed source is fully
 	 * initialized.
diff --git a/crypto/internal.h b/crypto/internal.h
index d5ebc60c5143..ff06a3bd1ca1 100644
--- a/crypto/internal.h
+++ b/crypto/internal.h
@@ -65,6 +65,7 @@ void crypto_alg_tested(const char *name, int err);
 void crypto_remove_spawns(struct crypto_alg *alg, struct list_head *list,
 			  struct crypto_alg *nalg);
 void crypto_remove_final(struct list_head *list);
+void crypto_shoot_alg(struct crypto_alg *alg);
 struct crypto_tfm *__crypto_alloc_tfm(struct crypto_alg *alg, u32 type,
 				      u32 mask);
 void *crypto_create_tfm(struct crypto_alg *alg,
diff --git a/crypto/jitterentropy-kcapi.c b/crypto/jitterentropy-kcapi.c
index a5ce8f96790f..b43684c0dade 100644
--- a/crypto/jitterentropy-kcapi.c
+++ b/crypto/jitterentropy-kcapi.c
@@ -108,6 +108,7 @@ void jent_get_nstime(__u64 *out)
 struct jitterentropy {
 	spinlock_t jent_lock;
 	struct rand_data *entropy_collector;
+	unsigned int reset_cnt;
 };
 
 static int jent_kcapi_init(struct crypto_tfm *tfm)
@@ -142,7 +143,33 @@ static int jent_kcapi_random(struct crypto_rng *tfm,
 	int ret = 0;
 
 	spin_lock(&rng->jent_lock);
+
+	/* Return a permanent error in case we had too many resets in a row. */
+	if (rng->reset_cnt > (1<<10)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
 	ret = jent_read_entropy(rng->entropy_collector, rdata, dlen);
+
+	/* Reset RNG in case of health failures */
+	if (ret < -1) {
+		pr_warn_ratelimited("Reset Jitter RNG due to health test failure: %s failure\n",
+				    (ret == -2) ? "Repetition Count Test" :
+						  "Adaptive Proportion Test");
+
+		rng->reset_cnt++;
+
+		ret = -EAGAIN;
+	} else {
+		rng->reset_cnt = 0;
+
+		/* Convert the Jitter RNG error into a usable error code */
+		if (ret == -1)
+			ret = -EINVAL;
+	}
+
+out:
 	spin_unlock(&rng->jent_lock);
 
 	return ret;
diff --git a/crypto/jitterentropy.c b/crypto/jitterentropy.c
index 042157f0d28b..57f4a1ac738b 100644
--- a/crypto/jitterentropy.c
+++ b/crypto/jitterentropy.c
@@ -2,7 +2,7 @@
  * Non-physical true random number generator based on timing jitter --
  * Jitter RNG standalone code.
  *
- * Copyright Stephan Mueller <smueller@chronox.de>, 2015 - 2019
+ * Copyright Stephan Mueller <smueller@chronox.de>, 2015 - 2020
  *
  * Design
  * ======
@@ -47,7 +47,7 @@
 
 /*
  * This Jitterentropy RNG is based on the jitterentropy library
- * version 2.1.2 provided at http://www.chronox.de/jent.html
+ * version 2.2.0 provided at http://www.chronox.de/jent.html
  */
 
 #ifdef __OPTIMIZE__
@@ -83,6 +83,22 @@ struct rand_data {
 	unsigned int memblocksize; /* Size of one memory block in bytes */
 	unsigned int memaccessloops; /* Number of memory accesses per random
 				      * bit generation */
+
+	/* Repetition Count Test */
+	int rct_count;			/* Number of stuck values */
+
+	/* Adaptive Proportion Test for a significance level of 2^-30 */
+#define JENT_APT_CUTOFF		325	/* Taken from SP800-90B sec 4.4.2 */
+#define JENT_APT_WINDOW_SIZE	512	/* Data window size */
+	/* LSB of time stamp to process */
+#define JENT_APT_LSB		16
+#define JENT_APT_WORD_MASK	(JENT_APT_LSB - 1)
+	unsigned int apt_observations;	/* Number of collected observations */
+	unsigned int apt_count;		/* APT counter */
+	unsigned int apt_base;		/* APT base reference */
+	unsigned int apt_base_set:1;	/* APT base reference set? */
+
+	unsigned int health_failure:1;	/* Permanent health failure */
 };
 
 /* Flags that can be used to initialize the RNG */
@@ -98,12 +114,201 @@ struct rand_data {
 				   * variations (2nd derivation of time is
 				   * zero). */
 #define JENT_ESTUCK		8 /* Too many stuck results during init. */
+#define JENT_EHEALTH		9 /* Health test failed during initialization */
+#define JENT_ERCT		10 /* RCT failed during initialization */
+
+#include "jitterentropy.h"
 
 /***************************************************************************
- * Helper functions
+ * Adaptive Proportion Test
+ *
+ * This test complies with SP800-90B section 4.4.2.
  ***************************************************************************/
 
-#include "jitterentropy.h"
+/**
+ * Reset the APT counter
+ *
+ * @ec [in] Reference to entropy collector
+ */
+static void jent_apt_reset(struct rand_data *ec, unsigned int delta_masked)
+{
+	/* Reset APT counter */
+	ec->apt_count = 0;
+	ec->apt_base = delta_masked;
+	ec->apt_observations = 0;
+}
+
+/**
+ * Insert a new entropy event into APT
+ *
+ * @ec [in] Reference to entropy collector
+ * @delta_masked [in] Masked time delta to process
+ */
+static void jent_apt_insert(struct rand_data *ec, unsigned int delta_masked)
+{
+	/* Initialize the base reference */
+	if (!ec->apt_base_set) {
+		ec->apt_base = delta_masked;
+		ec->apt_base_set = 1;
+		return;
+	}
+
+	if (delta_masked == ec->apt_base) {
+		ec->apt_count++;
+
+		if (ec->apt_count >= JENT_APT_CUTOFF)
+			ec->health_failure = 1;
+	}
+
+	ec->apt_observations++;
+
+	if (ec->apt_observations >= JENT_APT_WINDOW_SIZE)
+		jent_apt_reset(ec, delta_masked);
+}
+
+/***************************************************************************
+ * Stuck Test and its use as Repetition Count Test
+ *
+ * The Jitter RNG uses an enhanced version of the Repetition Count Test
+ * (RCT) specified in SP800-90B section 4.4.1. Instead of counting identical
+ * back-to-back values, the input to the RCT is the counting of the stuck
+ * values during the generation of one Jitter RNG output block.
+ *
+ * The RCT is applied with an alpha of 2^{-30} compliant to FIPS 140-2 IG 9.8.
+ *
+ * During the counting operation, the Jitter RNG always calculates the RCT
+ * cut-off value of C. If that value exceeds the allowed cut-off value,
+ * the Jitter RNG output block will be calculated completely but discarded at
+ * the end. The caller of the Jitter RNG is informed with an error code.
+ ***************************************************************************/
+
+/**
+ * Repetition Count Test as defined in SP800-90B section 4.4.1
+ *
+ * @ec [in] Reference to entropy collector
+ * @stuck [in] Indicator whether the value is stuck
+ */
+static void jent_rct_insert(struct rand_data *ec, int stuck)
+{
+	/*
+	 * If we have a count less than zero, a previous RCT round identified
+	 * a failure. We will not overwrite it.
+	 */
+	if (ec->rct_count < 0)
+		return;
+
+	if (stuck) {
+		ec->rct_count++;
+
+		/*
+		 * The cutoff value is based on the following consideration:
+		 * alpha = 2^-30 as recommended in FIPS 140-2 IG 9.8.
+		 * In addition, we require an entropy value H of 1/OSR as this
+		 * is the minimum entropy required to provide full entropy.
+		 * Note, we collect 64 * OSR deltas for inserting them into
+		 * the entropy pool which should then have (close to) 64 bits
+		 * of entropy.
+		 *
+		 * Note, ec->rct_count (which equals to value B in the pseudo
+		 * code of SP800-90B section 4.4.1) starts with zero. Hence
+		 * we need to subtract one from the cutoff value as calculated
+		 * following SP800-90B.
+		 */
+		if ((unsigned int)ec->rct_count >= (31 * ec->osr)) {
+			ec->rct_count = -1;
+			ec->health_failure = 1;
+		}
+	} else {
+		ec->rct_count = 0;
+	}
+}
+
+/**
+ * Is there an RCT health test failure?
+ *
+ * @ec [in] Reference to entropy collector
+ *
+ * @return
+ * 	0 No health test failure
+ * 	1 Permanent health test failure
+ */
+static int jent_rct_failure(struct rand_data *ec)
+{
+	if (ec->rct_count < 0)
+		return 1;
+	return 0;
+}
+
+static inline __u64 jent_delta(__u64 prev, __u64 next)
+{
+#define JENT_UINT64_MAX		(__u64)(~((__u64) 0))
+	return (prev < next) ? (next - prev) :
+			       (JENT_UINT64_MAX - prev + 1 + next);
+}
+
+/**
+ * Stuck test by checking the:
+ * 	1st derivative of the jitter measurement (time delta)
+ * 	2nd derivative of the jitter measurement (delta of time deltas)
+ * 	3rd derivative of the jitter measurement (delta of delta of time deltas)
+ *
+ * All values must always be non-zero.
+ *
+ * @ec [in] Reference to entropy collector
+ * @current_delta [in] Jitter time delta
+ *
+ * @return
+ * 	0 jitter measurement not stuck (good bit)
+ * 	1 jitter measurement stuck (reject bit)
+ */
+static int jent_stuck(struct rand_data *ec, __u64 current_delta)
+{
+	__u64 delta2 = jent_delta(ec->last_delta, current_delta);
+	__u64 delta3 = jent_delta(ec->last_delta2, delta2);
+	unsigned int delta_masked = current_delta & JENT_APT_WORD_MASK;
+
+	ec->last_delta = current_delta;
+	ec->last_delta2 = delta2;
+
+	/*
+	 * Insert the result of the comparison of two back-to-back time
+	 * deltas.
+	 */
+	jent_apt_insert(ec, delta_masked);
+
+	if (!current_delta || !delta2 || !delta3) {
+		/* RCT with a stuck bit */
+		jent_rct_insert(ec, 1);
+		return 1;
+	}
+
+	/* RCT with a non-stuck bit */
+	jent_rct_insert(ec, 0);
+
+	return 0;
+}
+
+/**
+ * Report any health test failures
+ *
+ * @ec [in] Reference to entropy collector
+ *
+ * @return
+ * 	0 No health test failure
+ * 	1 Permanent health test failure
+ */
+static int jent_health_failure(struct rand_data *ec)
+{
+	/* Test is only enabled in FIPS mode */
+	if (!jent_fips_enabled())
+		return 0;
+
+	return ec->health_failure;
+}
+
+/***************************************************************************
+ * Noise sources
+ ***************************************************************************/
 
 /**
  * Update of the loop count used for the next round of
@@ -148,10 +353,6 @@ static __u64 jent_loop_shuffle(struct rand_data *ec,
 	return (shuffle + (1<<min));
 }
 
-/***************************************************************************
- * Noise sources
- ***************************************************************************/
-
 /**
  * CPU Jitter noise source -- this is the noise source based on the CPU
  *			      execution time jitter
@@ -166,18 +367,19 @@ static __u64 jent_loop_shuffle(struct rand_data *ec,
  * the CPU execution time jitter. Any change to the loop in this function
  * implies that careful retesting must be done.
  *
- * Input:
- * @ec entropy collector struct
- * @time time stamp to be injected
- * @loop_cnt if a value not equal to 0 is set, use the given value as number of
- *	     loops to perform the folding
+ * @ec [in] entropy collector struct
+ * @time [in] time stamp to be injected
+ * @loop_cnt [in] if a value not equal to 0 is set, use the given value as
+ *		  number of loops to perform the folding
+ * @stuck [in] Is the time stamp identified as stuck?
  *
  * Output:
  * updated ec->data
  *
  * @return Number of loops the folding operation is performed
  */
-static __u64 jent_lfsr_time(struct rand_data *ec, __u64 time, __u64 loop_cnt)
+static void jent_lfsr_time(struct rand_data *ec, __u64 time, __u64 loop_cnt,
+			   int stuck)
 {
 	unsigned int i;
 	__u64 j = 0;
@@ -220,9 +422,17 @@ static __u64 jent_lfsr_time(struct rand_data *ec, __u64 time, __u64 loop_cnt)
 			new ^= tmp;
 		}
 	}
-	ec->data = new;
 
-	return fold_loop_cnt;
+	/*
+	 * If the time stamp is stuck, do not finally insert the value into
+	 * the entropy pool. Although this operation should not do any harm
+	 * even when the time stamp has no entropy, SP800-90B requires that
+	 * any conditioning operation (SP800-90B considers the LFSR to be a
+	 * conditioning operation) to have an identical amount of input
+	 * data according to section 3.1.5.
+	 */
+	if (!stuck)
+		ec->data = new;
 }
 
 /**
@@ -243,16 +453,13 @@ static __u64 jent_lfsr_time(struct rand_data *ec, __u64 time, __u64 loop_cnt)
  * to reliably access either L3 or memory, the ec->mem memory must be quite
  * large which is usually not desirable.
  *
- * Input:
- * @ec Reference to the entropy collector with the memory access data -- if
- *     the reference to the memory block to be accessed is NULL, this noise
- *     source is disabled
- * @loop_cnt if a value not equal to 0 is set, use the given value as number of
- *	     loops to perform the folding
- *
- * @return Number of memory access operations
+ * @ec [in] Reference to the entropy collector with the memory access data -- if
+ *	    the reference to the memory block to be accessed is NULL, this noise
+ *	    source is disabled
+ * @loop_cnt [in] if a value not equal to 0 is set, use the given value
+ *		  number of loops to perform the LFSR
  */
-static unsigned int jent_memaccess(struct rand_data *ec, __u64 loop_cnt)
+static void jent_memaccess(struct rand_data *ec, __u64 loop_cnt)
 {
 	unsigned int wrap = 0;
 	__u64 i = 0;
@@ -262,7 +469,7 @@ static unsigned int jent_memaccess(struct rand_data *ec, __u64 loop_cnt)
 		jent_loop_shuffle(ec, MAX_ACC_LOOP_BIT, MIN_ACC_LOOP_BIT);
 
 	if (NULL == ec || NULL == ec->mem)
-		return 0;
+		return;
 	wrap = ec->memblocksize * ec->memblocks;
 
 	/*
@@ -288,43 +495,11 @@ static unsigned int jent_memaccess(struct rand_data *ec, __u64 loop_cnt)
 		ec->memlocation = ec->memlocation + ec->memblocksize - 1;
 		ec->memlocation = ec->memlocation % wrap;
 	}
-	return i;
 }
 
 /***************************************************************************
  * Start of entropy processing logic
  ***************************************************************************/
-
-/**
- * Stuck test by checking the:
- *	1st derivation of the jitter measurement (time delta)
- *	2nd derivation of the jitter measurement (delta of time deltas)
- *	3rd derivation of the jitter measurement (delta of delta of time deltas)
- *
- * All values must always be non-zero.
- *
- * Input:
- * @ec Reference to entropy collector
- * @current_delta Jitter time delta
- *
- * @return
- *	0 jitter measurement not stuck (good bit)
- *	1 jitter measurement stuck (reject bit)
- */
-static int jent_stuck(struct rand_data *ec, __u64 current_delta)
-{
-	__s64 delta2 = ec->last_delta - current_delta;
-	__s64 delta3 = delta2 - ec->last_delta2;
-
-	ec->last_delta = current_delta;
-	ec->last_delta2 = delta2;
-
-	if (!current_delta || !delta2 || !delta3)
-		return 1;
-
-	return 0;
-}
-
 /**
  * This is the heart of the entropy generation: calculate time deltas and
  * use the CPU jitter in the time deltas. The jitter is injected into the
@@ -334,8 +509,7 @@ static int jent_stuck(struct rand_data *ec, __u64 current_delta)
  *	    of this function! This can be done by calling this function
  *	    and not using its result.
  *
- * Input:
- * @entropy_collector Reference to entropy collector
+ * @ec [in] Reference to entropy collector
  *
  * @return result of stuck test
  */
@@ -343,6 +517,7 @@ static int jent_measure_jitter(struct rand_data *ec)
 {
 	__u64 time = 0;
 	__u64 current_delta = 0;
+	int stuck;
 
 	/* Invoke one noise source before time measurement to add variations */
 	jent_memaccess(ec, 0);
@@ -352,22 +527,23 @@ static int jent_measure_jitter(struct rand_data *ec)
 	 * invocation to measure the timing variations
 	 */
 	jent_get_nstime(&time);
-	current_delta = time - ec->prev_time;
+	current_delta = jent_delta(ec->prev_time, time);
 	ec->prev_time = time;
 
+	/* Check whether we have a stuck measurement. */
+	stuck = jent_stuck(ec, current_delta);
+
 	/* Now call the next noise sources which also injects the data */
-	jent_lfsr_time(ec, current_delta, 0);
+	jent_lfsr_time(ec, current_delta, 0, stuck);
 
-	/* Check whether we have a stuck measurement. */
-	return jent_stuck(ec, current_delta);
+	return stuck;
 }
 
 /**
  * Generator of one 64 bit random number
  * Function fills rand_data->data
  *
- * Input:
- * @ec Reference to entropy collector
+ * @ec [in] Reference to entropy collector
  */
 static void jent_gen_entropy(struct rand_data *ec)
 {
@@ -390,31 +566,6 @@ static void jent_gen_entropy(struct rand_data *ec)
 	}
 }
 
-/**
- * The continuous test required by FIPS 140-2 -- the function automatically
- * primes the test if needed.
- *
- * Return:
- * returns normally if FIPS test passed
- * panics the kernel if FIPS test failed
- */
-static void jent_fips_test(struct rand_data *ec)
-{
-	if (!jent_fips_enabled())
-		return;
-
-	/* prime the FIPS test */
-	if (!ec->old_data) {
-		ec->old_data = ec->data;
-		jent_gen_entropy(ec);
-	}
-
-	if (ec->data == ec->old_data)
-		jent_panic("jitterentropy: Duplicate output detected\n");
-
-	ec->old_data = ec->data;
-}
-
 /**
  * Entry function: Obtain entropy for the caller.
  *
@@ -425,17 +576,18 @@ static void jent_fips_test(struct rand_data *ec)
  * This function truncates the last 64 bit entropy value output to the exact
  * size specified by the caller.
  *
- * Input:
- * @ec Reference to entropy collector
- * @data pointer to buffer for storing random data -- buffer must already
- *	 exist
- * @len size of the buffer, specifying also the requested number of random
- *	in bytes
+ * @ec [in] Reference to entropy collector
+ * @data [in] pointer to buffer for storing random data -- buffer must already
+ *	      exist
+ * @len [in] size of the buffer, specifying also the requested number of random
+ *	     in bytes
  *
  * @return 0 when request is fulfilled or an error
  *
  * The following error codes can occur:
  *	-1	entropy_collector is NULL
+ *	-2	RCT failed
+ *	-3	APT test failed
  */
 int jent_read_entropy(struct rand_data *ec, unsigned char *data,
 		      unsigned int len)
@@ -449,7 +601,42 @@ int jent_read_entropy(struct rand_data *ec, unsigned char *data,
 		unsigned int tocopy;
 
 		jent_gen_entropy(ec);
-		jent_fips_test(ec);
+
+		if (jent_health_failure(ec)) {
+			int ret;
+
+			if (jent_rct_failure(ec))
+				ret = -2;
+			else
+				ret = -3;
+
+			/*
+			 * Re-initialize the noise source
+			 *
+			 * If the health test fails, the Jitter RNG remains
+			 * in failure state and will return a health failure
+			 * during next invocation.
+			 */
+			if (jent_entropy_init())
+				return ret;
+
+			/* Set APT to initial state */
+			jent_apt_reset(ec, 0);
+			ec->apt_base_set = 0;
+
+			/* Set RCT to initial state */
+			ec->rct_count = 0;
+
+			/* Re-enable Jitter RNG */
+			ec->health_failure = 0;
+
+			/*
+			 * Return the health test failure status to the
+			 * caller as the generated value is not appropriate.
+			 */
+			return ret;
+		}
+
 		if ((DATA_SIZE_BITS / 8) < len)
 			tocopy = (DATA_SIZE_BITS / 8);
 		else
@@ -513,11 +700,15 @@ int jent_entropy_init(void)
 	int i;
 	__u64 delta_sum = 0;
 	__u64 old_delta = 0;
+	unsigned int nonstuck = 0;
 	int time_backwards = 0;
 	int count_mod = 0;
 	int count_stuck = 0;
 	struct rand_data ec = { 0 };
 
+	/* Required for RCT */
+	ec.osr = 1;
+
 	/* We could perform statistical tests here, but the problem is
 	 * that we only have a few loop counts to do testing. These
 	 * loop counts may show some slight skew and we produce
@@ -539,8 +730,10 @@ int jent_entropy_init(void)
 	/*
 	 * TESTLOOPCOUNT needs some loops to identify edge systems. 100 is
 	 * definitely too little.
+	 *
+	 * SP800-90B requires at least 1024 initial test cycles.
 	 */
-#define TESTLOOPCOUNT 300
+#define TESTLOOPCOUNT 1024
 #define CLEARCACHE 100
 	for (i = 0; (TESTLOOPCOUNT + CLEARCACHE) > i; i++) {
 		__u64 time = 0;
@@ -552,13 +745,13 @@ int jent_entropy_init(void)
 		/* Invoke core entropy collection logic */
 		jent_get_nstime(&time);
 		ec.prev_time = time;
-		jent_lfsr_time(&ec, time, 0);
+		jent_lfsr_time(&ec, time, 0, 0);
 		jent_get_nstime(&time2);
 
 		/* test whether timer works */
 		if (!time || !time2)
 			return JENT_ENOTIME;
-		delta = time2 - time;
+		delta = jent_delta(time, time2);
 		/*
 		 * test whether timer is fine grained enough to provide
 		 * delta even when called shortly after each other -- this
@@ -581,6 +774,28 @@ int jent_entropy_init(void)
 
 		if (stuck)
 			count_stuck++;
+		else {
+			nonstuck++;
+
+			/*
+			 * Ensure that the APT succeeded.
+			 *
+			 * With the check below that count_stuck must be less
+			 * than 10% of the overall generated raw entropy values
+			 * it is guaranteed that the APT is invoked at
+			 * floor((TESTLOOPCOUNT * 0.9) / 64) == 14 times.
+			 */
+			if ((nonstuck % JENT_APT_WINDOW_SIZE) == 0) {
+				jent_apt_reset(&ec,
+					       delta & JENT_APT_WORD_MASK);
+				if (jent_health_failure(&ec))
+					return JENT_EHEALTH;
+			}
+		}
+
+		/* Validate RCT */
+		if (jent_rct_failure(&ec))
+			return JENT_ERCT;
 
 		/* test whether we have an increasing timer */
 		if (!(time2 > time))
diff --git a/drivers/acpi/acpi_extlog.c b/drivers/acpi/acpi_extlog.c
index 8596a106a933..f138e12b7b82 100644
--- a/drivers/acpi/acpi_extlog.c
+++ b/drivers/acpi/acpi_extlog.c
@@ -42,8 +42,6 @@ struct extlog_l1_head {
 	u8  rev1[12];
 };
 
-static int old_edac_report_status;
-
 static u8 extlog_dsm_uuid[] __initdata = "663E35AF-CC10-41A4-88EA-5470AF055295";
 
 /* L1 table related physical address */
@@ -146,7 +144,7 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
 	static u32 err_seq;
 
 	estatus = extlog_elog_entry_check(cpu, bank);
-	if (estatus == NULL)
+	if (estatus == NULL || (mce->kflags & MCE_HANDLED_CEC))
 		return NOTIFY_DONE;
 
 	memcpy(elog_buf, (void *)estatus, ELOG_ENTRY_LEN);
@@ -176,7 +174,8 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
 	}
 
 out:
-	return NOTIFY_STOP;
+	mce->kflags |= MCE_HANDLED_EXTLOG;
+	return NOTIFY_OK;
 }
 
 static bool __init extlog_get_l1addr(void)
@@ -228,11 +227,6 @@ static int __init extlog_init(void)
 	if (!(cap & MCG_ELOG_P) || !extlog_get_l1addr())
 		return -ENODEV;
 
-	if (edac_get_report_status() == EDAC_REPORTING_FORCE) {
-		pr_warn("Not loading eMCA, error reporting force-enabled through EDAC.\n");
-		return -EPERM;
-	}
-
 	rc = -EINVAL;
 	/* get L1 header to fetch necessary information */
 	l1_hdr_size = sizeof(struct extlog_l1_head);
@@ -280,12 +274,6 @@ static int __init extlog_init(void)
 	if (elog_buf == NULL)
 		goto err_release_elog;
 
-	/*
-	 * eMCA event report method has higher priority than EDAC method,
-	 * unless EDAC event report method is mandatory.
-	 */
-	old_edac_report_status = edac_get_report_status();
-	edac_set_report_status(EDAC_REPORTING_DISABLED);
 	mce_register_decode_chain(&extlog_mce_dec);
 	/* enable OS to be involved to take over management from BIOS */
 	((struct extlog_l1_head *)extlog_l1_addr)->flags |= FLAG_OS_OPTIN;
@@ -307,7 +295,6 @@ static int __init extlog_init(void)
 
 static void __exit extlog_exit(void)
 {
-	edac_set_report_status(old_edac_report_status);
 	mce_unregister_decode_chain(&extlog_mce_dec);
 	((struct extlog_l1_head *)extlog_l1_addr)->flags &= ~FLAG_OS_OPTIN;
 	if (extlog_l1_addr)
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index dee999938213..5e2bfbcf526f 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -1041,7 +1041,7 @@ static int acpi_lpss_do_suspend_late(struct device *dev)
 {
 	int ret;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	ret = pm_generic_suspend_late(dev);
@@ -1093,6 +1093,9 @@ static int acpi_lpss_resume_early(struct device *dev)
 	if (pdata->dev_desc->resume_from_noirq)
 		return 0;
 
+	if (dev_pm_skip_resume(dev))
+		return 0;
+
 	return acpi_lpss_do_resume_early(dev);
 }
 
@@ -1102,12 +1105,9 @@ static int acpi_lpss_resume_noirq(struct device *dev)
 	int ret;
 
 	/* Follow acpi_subsys_resume_noirq(). */
-	if (dev_pm_may_skip_resume(dev))
+	if (dev_pm_skip_resume(dev))
 		return 0;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		pm_runtime_set_active(dev);
-
 	ret = pm_generic_resume_noirq(dev);
 	if (ret)
 		return ret;
@@ -1169,7 +1169,7 @@ static int acpi_lpss_poweroff_late(struct device *dev)
 {
 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	if (pdata->dev_desc->resume_from_noirq)
@@ -1182,7 +1182,7 @@ static int acpi_lpss_poweroff_noirq(struct device *dev)
 {
 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	if (pdata->dev_desc->resume_from_noirq) {
diff --git a/drivers/acpi/acpi_tad.c b/drivers/acpi/acpi_tad.c
index 33a4bcdaa4d7..7d45cce0c3c1 100644
--- a/drivers/acpi/acpi_tad.c
+++ b/drivers/acpi/acpi_tad.c
@@ -624,7 +624,7 @@ static int acpi_tad_probe(struct platform_device *pdev)
 	 */
 	device_init_wakeup(dev, true);
 	dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND |
-				     DPM_FLAG_LEAVE_SUSPENDED);
+				     DPM_FLAG_MAY_SKIP_RESUME);
 	/*
 	 * The platform bus type layer tells the ACPI PM domain powers up the
 	 * device, so set the runtime PM status of it to "active".
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 7d04424189df..051b2ce03070 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -1148,13 +1148,10 @@ void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
 	else
 		size = 1ULL << 32;
 
-	if (dev_is_pci(dev)) {
-		ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
-		if (ret == -ENODEV)
-			ret = rc_dma_get_range(dev, &size);
-	} else {
-		ret = nc_dma_get_range(dev, &size);
-	}
+	ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
+	if (ret == -ENODEV)
+		ret = dev_is_pci(dev) ? rc_dma_get_range(dev, &size)
+				      : nc_dma_get_range(dev, &size);
 
 	if (!ret) {
 		/*
diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 8b2e89c20c11..f8184004294a 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -350,7 +350,7 @@ static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret)
 				*(u16 *)msg, ret);
 }
 
-struct mbox_client cppc_mbox_cl = {
+static struct mbox_client cppc_mbox_cl = {
 	.tx_done = cppc_chan_tx_done,
 	.knows_txdone = true,
 };
@@ -597,7 +597,7 @@ bool __weak cpc_ffh_supported(void)
  *
  * Return: 0 for success, errno for failure
  */
-int pcc_data_alloc(int pcc_ss_id)
+static int pcc_data_alloc(int pcc_ss_id)
 {
 	if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES)
 		return -EINVAL;
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index b2263ec67b43..b44b12a931e7 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -273,13 +273,13 @@ int acpi_device_set_power(struct acpi_device *device, int state)
  end:
 	if (result) {
 		dev_warn(&device->dev, "Failed to change power state to %s\n",
-			 acpi_power_state_string(state));
+			 acpi_power_state_string(target_state));
 	} else {
 		device->power.state = target_state;
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Device [%s] transitioned to %s\n",
 				  device->pnp.bus_id,
-				  acpi_power_state_string(state)));
+				  acpi_power_state_string(target_state)));
 	}
 
 	return result;
@@ -1084,7 +1084,7 @@ int acpi_subsys_suspend_late(struct device *dev)
 {
 	int ret;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	ret = pm_generic_suspend_late(dev);
@@ -1100,10 +1100,8 @@ int acpi_subsys_suspend_noirq(struct device *dev)
 {
 	int ret;
 
-	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		dev->power.may_skip_resume = true;
+	if (dev_pm_skip_suspend(dev))
 		return 0;
-	}
 
 	ret = pm_generic_suspend_noirq(dev);
 	if (ret)
@@ -1116,8 +1114,8 @@ int acpi_subsys_suspend_noirq(struct device *dev)
 	 * acpi_subsys_complete() to take care of fixing up the device's state
 	 * anyway, if need be.
 	 */
-	dev->power.may_skip_resume = device_may_wakeup(dev) ||
-					!device_can_wakeup(dev);
+	if (device_can_wakeup(dev) && !device_may_wakeup(dev))
+		dev->power.may_skip_resume = false;
 
 	return 0;
 }
@@ -1129,17 +1127,9 @@ EXPORT_SYMBOL_GPL(acpi_subsys_suspend_noirq);
  */
 static int acpi_subsys_resume_noirq(struct device *dev)
 {
-	if (dev_pm_may_skip_resume(dev))
+	if (dev_pm_skip_resume(dev))
 		return 0;
 
-	/*
-	 * Devices with DPM_FLAG_SMART_SUSPEND may be left in runtime suspend
-	 * during system suspend, so update their runtime PM status to "active"
-	 * as they will be put into D0 going forward.
-	 */
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		pm_runtime_set_active(dev);
-
 	return pm_generic_resume_noirq(dev);
 }
 
@@ -1153,7 +1143,12 @@ static int acpi_subsys_resume_noirq(struct device *dev)
  */
 static int acpi_subsys_resume_early(struct device *dev)
 {
-	int ret = acpi_dev_resume(dev);
+	int ret;
+
+	if (dev_pm_skip_resume(dev))
+		return 0;
+
+	ret = acpi_dev_resume(dev);
 	return ret ? ret : pm_generic_resume_early(dev);
 }
 
@@ -1218,7 +1213,7 @@ static int acpi_subsys_poweroff_late(struct device *dev)
 {
 	int ret;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	ret = pm_generic_poweroff_late(dev);
@@ -1234,7 +1229,7 @@ static int acpi_subsys_poweroff_late(struct device *dev)
  */
 static int acpi_subsys_poweroff_noirq(struct device *dev)
 {
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	return pm_generic_poweroff_noirq(dev);
diff --git a/drivers/acpi/nfit/mce.c b/drivers/acpi/nfit/mce.c
index f0ae48515b48..ee8d9973f60b 100644
--- a/drivers/acpi/nfit/mce.c
+++ b/drivers/acpi/nfit/mce.c
@@ -76,6 +76,7 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val,
 			 */
 			acpi_nfit_ars_rescan(acpi_desc, 0);
 		}
+		mce->kflags |= MCE_HANDLED_NFIT;
 		break;
 	}
 
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index ac8ad6cb82aa..9e235c1a75ff 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -483,13 +483,8 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 	if (IS_ENABLED(CONFIG_HOTPLUG_PCI_SHPC))
 		control |= OSC_PCI_SHPC_NATIVE_HP_CONTROL;
 
-	if (pci_aer_available()) {
-		if (aer_acpi_firmware_first())
-			dev_info(&device->dev,
-				 "PCIe AER handled by firmware\n");
-		else
-			control |= OSC_PCI_EXPRESS_AER_CONTROL;
-	}
+	if (pci_aer_available())
+		control |= OSC_PCI_EXPRESS_AER_CONTROL;
 
 	/*
 	 * Per the Downstream Port Containment Related Enhancements ECN to
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index dcc289e30166..75534c5b5433 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -308,11 +308,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
 	if (ret)
 		return ret;
 
-	/*
-	 * It is expected that there will be at least 2 states, C1 and
-	 * something else (C2 or C3), so fail if that is not the case.
-	 */
-	if (pr->power.count < 2)
+	if (!pr->power.count)
 		return -EFAULT;
 
 	pr->flags.has_cst = 1;
@@ -468,8 +464,7 @@ static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
 	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
 		if (pr->power.states[i].valid) {
 			pr->power.count = i;
-			if (pr->power.states[i].type >= ACPI_STATE_C2)
-				pr->flags.power = 1;
+			pr->flags.power = 1;
 		}
 	}
 
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index fe1523664816..8558b629880b 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -645,6 +645,7 @@ static void amba_device_initialize(struct amba_device *dev, const char *name)
 	dev->dev.release = amba_device_release;
 	dev->dev.bus = &amba_bustype;
 	dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+	dev->dev.dma_parms = &dev->dma_parms;
 	dev->res.name = dev_name(&dev->dev);
 }
 
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c
index 57d3b2e2d007..0b2c20fddb7c 100644
--- a/drivers/amba/tegra-ahb.c
+++ b/drivers/amba/tegra-ahb.c
@@ -120,7 +120,7 @@ static const u32 tegra_ahb_gizmo[] = {
 struct tegra_ahb {
 	void __iomem	*regs;
 	struct device	*dev;
-	u32		ctx[0];
+	u32		ctx[];
 };
 
 static inline u32 gizmo_readl(struct tegra_ahb *ahb, u32 offset)
diff --git a/drivers/android/binderfs.c b/drivers/android/binderfs.c
index 9ecad74183a3..7cf566aafe1f 100644
--- a/drivers/android/binderfs.c
+++ b/drivers/android/binderfs.c
@@ -650,7 +650,7 @@ static int binderfs_fill_super(struct super_block *sb, struct fs_context *fc)
 	struct binderfs_info *info;
 	struct binderfs_mount_opts *ctx = fc->fs_private;
 	struct inode *inode = NULL;
-	struct binderfs_device device_info = { 0 };
+	struct binderfs_device device_info = {};
 	const char *name;
 	size_t len;
 
@@ -747,7 +747,7 @@ static const struct fs_context_operations binderfs_fs_context_ops = {
 
 static int binderfs_init_fs_context(struct fs_context *fc)
 {
-	struct binderfs_mount_opts *ctx = fc->fs_private;
+	struct binderfs_mount_opts *ctx;
 
 	ctx = kzalloc(sizeof(struct binderfs_mount_opts), GFP_KERNEL);
 	if (!ctx)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index beca5f91bb4c..69361ec43db5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5209,7 +5209,7 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
  *	sata_link_init_spd - Initialize link->sata_spd_limit
  *	@link: Link to configure sata_spd_limit for
  *
- *	Initialize @link->[hw_]sata_spd_limit to the currently
+ *	Initialize ``link->[hw_]sata_spd_limit`` to the currently
  *	configured value.
  *
  *	LOCKING:
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 36e588d88b95..435781a16875 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -649,7 +649,7 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
 {
 	struct scsi_cmnd *scmd = qc->scsicmd;
 
-	qc->extrabytes = scmd->request->extra_len;
+	qc->extrabytes = scmd->extra_len;
 	qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes;
 }
 
@@ -1017,16 +1017,11 @@ void ata_scsi_sdev_config(struct scsi_device *sdev)
  *	RETURNS:
  *	1 if ; otherwise, 0.
  */
-static int atapi_drain_needed(struct request *rq)
+bool ata_scsi_dma_need_drain(struct request *rq)
 {
-	if (likely(!blk_rq_is_passthrough(rq)))
-		return 0;
-
-	if (!blk_rq_bytes(rq) || op_is_write(req_op(rq)))
-		return 0;
-
 	return atapi_cmd_type(scsi_req(rq)->cmd[0]) == ATAPI_MISC;
 }
+EXPORT_SYMBOL_GPL(ata_scsi_dma_need_drain);
 
 int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 {
@@ -1039,21 +1034,21 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 	blk_queue_max_hw_sectors(q, dev->max_sectors);
 
 	if (dev->class == ATA_DEV_ATAPI) {
-		void *buf;
-
 		sdev->sector_size = ATA_SECT_SIZE;
 
 		/* set DMA padding */
 		blk_queue_update_dma_pad(q, ATA_DMA_PAD_SZ - 1);
 
-		/* configure draining */
-		buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
-		if (!buf) {
+		/* make room for appending the drain */
+		blk_queue_max_segments(q, queue_max_segments(q) - 1);
+
+		sdev->dma_drain_len = ATAPI_MAX_DRAIN;
+		sdev->dma_drain_buf = kmalloc(sdev->dma_drain_len,
+				q->bounce_gfp | GFP_KERNEL);
+		if (!sdev->dma_drain_buf) {
 			ata_dev_err(dev, "drain buffer allocation failed\n");
 			return -ENOMEM;
 		}
-
-		blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN);
 	} else {
 		sdev->sector_size = ata_id_logical_sector_size(dev->id);
 		sdev->manage_start_stop = 1;
@@ -1135,7 +1130,6 @@ EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
 void ata_scsi_slave_destroy(struct scsi_device *sdev)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
-	struct request_queue *q = sdev->request_queue;
 	unsigned long flags;
 	struct ata_device *dev;
 
@@ -1152,9 +1146,7 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev)
 	}
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	kfree(q->dma_drain_buffer);
-	q->dma_drain_buffer = NULL;
-	q->dma_drain_size = 0;
+	kfree(sdev->dma_drain_buf);
 }
 EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
 
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 8c37294f1d1e..cfb0d16b60ad 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -306,7 +306,7 @@ config ATM_IA
 	  for more info about the cards. Say Y (or M to compile as a module
 	  named iphase) here if you have one of these cards.
 
-	  See the file <file:Documentation/networking/iphase.txt> for further
+	  See the file <file:Documentation/networking/iphase.rst> for further
 	  details.
 
 config ATM_IA_DEBUG
@@ -336,7 +336,7 @@ config ATM_FORE200E
 	  on PCI and SBUS hosts. Say Y (or M to compile as a module
 	  named fore_200e) here if you have one of these ATM adapters.
 
-	  See the file <file:Documentation/networking/fore200e.txt> for
+	  See the file <file:Documentation/networking/fore200e.rst> for
 	  further details.
 
 config ATM_FORE200E_USE_TASKLET
diff --git a/drivers/base/component.c b/drivers/base/component.c
index e97704104784..dcfbe7251dc4 100644
--- a/drivers/base/component.c
+++ b/drivers/base/component.c
@@ -256,7 +256,8 @@ static int try_to_bring_up_master(struct master *master,
 	ret = master->ops->bind(master->dev);
 	if (ret < 0) {
 		devres_release_group(master->dev, NULL);
-		dev_info(master->dev, "master bind failed: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_info(master->dev, "master bind failed: %d\n", ret);
 		return ret;
 	}
 
@@ -611,8 +612,9 @@ static int component_bind(struct component *component, struct master *master,
 		devres_release_group(component->dev, NULL);
 		devres_release_group(master->dev, NULL);
 
-		dev_err(master->dev, "failed to bind %s (ops %ps): %d\n",
-			dev_name(component->dev), component->ops, ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(master->dev, "failed to bind %s (ops %ps): %d\n",
+				dev_name(component->dev), component->ops, ret);
 	}
 
 	return ret;
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 139cdf7e7327..3c1e184ee7ec 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1374,7 +1374,7 @@ static void device_release(struct kobject *kobj)
 	else if (dev->class && dev->class->dev_release)
 		dev->class->dev_release(dev);
 	else
-		WARN(1, KERN_ERR "Device '%s' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.\n",
+		WARN(1, KERN_ERR "Device '%s' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst.\n",
 			dev_name(dev));
 	kfree(p);
 }
@@ -2370,6 +2370,11 @@ u32 fw_devlink_get_flags(void)
 	return fw_devlink_flags;
 }
 
+static bool fw_devlink_is_permissive(void)
+{
+	return fw_devlink_flags == DL_FLAG_SYNC_STATE_ONLY;
+}
+
 /**
  * device_add - add device to device hierarchy.
  * @dev: device.
@@ -2524,7 +2529,7 @@ int device_add(struct device *dev)
 	if (fw_devlink_flags && is_fwnode_dev &&
 	    fwnode_has_op(dev->fwnode, add_links)) {
 		fw_ret = fwnode_call_int_op(dev->fwnode, add_links, dev);
-		if (fw_ret == -ENODEV)
+		if (fw_ret == -ENODEV && !fw_devlink_is_permissive())
 			device_link_wait_for_mandatory_supplier(dev);
 		else if (fw_ret)
 			device_link_wait_for_optional_supplier(dev);
@@ -3891,6 +3896,7 @@ void set_secondary_fwnode(struct device *dev, struct fwnode_handle *fwnode)
 	else
 		dev->fwnode = fwnode;
 }
+EXPORT_SYMBOL_GPL(set_secondary_fwnode);
 
 /**
  * device_set_of_node_from_dev - reuse device-tree node of another device
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 06ec0e851fa1..48ca81cb8ebc 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -224,17 +224,9 @@ static int deferred_devs_show(struct seq_file *s, void *data)
 }
 DEFINE_SHOW_ATTRIBUTE(deferred_devs);
 
-#ifdef CONFIG_MODULES
-/*
- * In the case of modules, set the default probe timeout to
- * 30 seconds to give userland some time to load needed modules
- */
-int driver_deferred_probe_timeout = 30;
-#else
-/* In the case of !modules, no probe timeout needed */
-int driver_deferred_probe_timeout = -1;
-#endif
+int driver_deferred_probe_timeout;
 EXPORT_SYMBOL_GPL(driver_deferred_probe_timeout);
+static DECLARE_WAIT_QUEUE_HEAD(probe_timeout_waitqueue);
 
 static int __init deferred_probe_timeout_setup(char *str)
 {
@@ -262,12 +254,12 @@ __setup("deferred_probe_timeout=", deferred_probe_timeout_setup);
 int driver_deferred_probe_check_state(struct device *dev)
 {
 	if (!IS_ENABLED(CONFIG_MODULES) && initcalls_done) {
-		dev_warn(dev, "ignoring dependency for device, assuming no driver");
+		dev_warn(dev, "ignoring dependency for device, assuming no driver\n");
 		return -ENODEV;
 	}
 
-	if (!driver_deferred_probe_timeout) {
-		dev_WARN(dev, "deferred probe timeout, ignoring dependency");
+	if (!driver_deferred_probe_timeout && initcalls_done) {
+		dev_warn(dev, "deferred probe timeout, ignoring dependency\n");
 		return -ETIMEDOUT;
 	}
 
@@ -283,7 +275,8 @@ static void deferred_probe_timeout_work_func(struct work_struct *work)
 	flush_work(&deferred_probe_work);
 
 	list_for_each_entry_safe(private, p, &deferred_probe_pending_list, deferred_probe)
-		dev_info(private->device, "deferred probe pending");
+		dev_info(private->device, "deferred probe pending\n");
+	wake_up(&probe_timeout_waitqueue);
 }
 static DECLARE_DELAYED_WORK(deferred_probe_timeout_work, deferred_probe_timeout_work_func);
 
@@ -343,7 +336,7 @@ bool device_is_bound(struct device *dev)
 static void driver_bound(struct device *dev)
 {
 	if (device_is_bound(dev)) {
-		printk(KERN_WARNING "%s: device %s already bound\n",
+		pr_warn("%s: device %s already bound\n",
 			__func__, kobject_name(&dev->kobj));
 		return;
 	}
@@ -512,8 +505,8 @@ static int really_probe(struct device *dev, struct device_driver *drv)
 	}
 
 	if (driver_sysfs_add(dev)) {
-		printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
-			__func__, dev_name(dev));
+		pr_err("%s: driver_sysfs_add(%s) failed\n",
+		       __func__, dev_name(dev));
 		goto probe_failed;
 	}
 
@@ -604,9 +597,8 @@ static int really_probe(struct device *dev, struct device_driver *drv)
 		break;
 	default:
 		/* driver matched but the probe failed */
-		printk(KERN_WARNING
-		       "%s: probe of %s failed with error %d\n",
-		       drv->name, dev_name(dev), ret);
+		pr_warn("%s: probe of %s failed with error %d\n",
+			drv->name, dev_name(dev), ret);
 	}
 	/*
 	 * Ignore errors returned by ->probe so that the next driver can try
@@ -631,8 +623,8 @@ static int really_probe_debug(struct device *dev, struct device_driver *drv)
 	ret = really_probe(dev, drv);
 	rettime = ktime_get();
 	delta = ktime_sub(rettime, calltime);
-	printk(KERN_DEBUG "probe of %s returned %d after %lld usecs\n",
-	       dev_name(dev), ret, (s64) ktime_to_us(delta));
+	pr_debug("probe of %s returned %d after %lld usecs\n",
+		 dev_name(dev), ret, (s64) ktime_to_us(delta));
 	return ret;
 }
 
@@ -658,6 +650,9 @@ int driver_probe_done(void)
  */
 void wait_for_device_probe(void)
 {
+	/* wait for probe timeout */
+	wait_event(probe_timeout_waitqueue, !driver_deferred_probe_timeout);
+
 	/* wait for the deferred probe workqueue to finish */
 	flush_work(&deferred_probe_work);
 
@@ -717,8 +712,7 @@ static inline bool cmdline_requested_async_probing(const char *drv_name)
 static int __init save_async_options(char *buf)
 {
 	if (strlen(buf) >= ASYNC_DRV_NAMES_MAX_LEN)
-		printk(KERN_WARNING
-			"Too long list of driver names for 'driver_async_probe'!\n");
+		pr_warn("Too long list of driver names for 'driver_async_probe'!\n");
 
 	strlcpy(async_probe_drv_names, buf, ASYNC_DRV_NAMES_MAX_LEN);
 	return 0;
@@ -793,7 +787,7 @@ static int __device_attach_driver(struct device_driver *drv, void *_data)
 		dev_dbg(dev, "Device match requests probe deferral\n");
 		driver_deferred_probe_add(dev);
 	} else if (ret < 0) {
-		dev_dbg(dev, "Bus failed to match device: %d", ret);
+		dev_dbg(dev, "Bus failed to match device: %d\n", ret);
 		return ret;
 	} /* ret > 0 means positive match */
 
@@ -1026,7 +1020,7 @@ static int __driver_attach(struct device *dev, void *data)
 		dev_dbg(dev, "Device match requests probe deferral\n");
 		driver_deferred_probe_add(dev);
 	} else if (ret < 0) {
-		dev_dbg(dev, "Bus failed to match device: %d", ret);
+		dev_dbg(dev, "Bus failed to match device: %d\n", ret);
 		return ret;
 	} /* ret > 0 means positive match */
 
diff --git a/drivers/base/firmware_loader/fallback.c b/drivers/base/firmware_loader/fallback.c
index 1e9c96e3ed63..d9ac7296205e 100644
--- a/drivers/base/firmware_loader/fallback.c
+++ b/drivers/base/firmware_loader/fallback.c
@@ -9,6 +9,7 @@
 #include <linux/umh.h>
 #include <linux/sysctl.h>
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 
 #include "fallback.h"
 #include "firmware.h"
@@ -17,6 +18,8 @@
  * firmware fallback mechanism
  */
 
+MODULE_IMPORT_NS(FIRMWARE_LOADER_PRIVATE);
+
 extern struct firmware_fallback_config fw_fallback_config;
 
 /* These getters are vetted to use int properly */
diff --git a/drivers/base/firmware_loader/fallback_table.c b/drivers/base/firmware_loader/fallback_table.c
index a182e318bd09..46a731dede6f 100644
--- a/drivers/base/firmware_loader/fallback_table.c
+++ b/drivers/base/firmware_loader/fallback_table.c
@@ -21,7 +21,7 @@ struct firmware_fallback_config fw_fallback_config = {
 	.loading_timeout = 60,
 	.old_timeout = 60,
 };
-EXPORT_SYMBOL_GPL(fw_fallback_config);
+EXPORT_SYMBOL_NS_GPL(fw_fallback_config, FIRMWARE_LOADER_PRIVATE);
 
 #ifdef CONFIG_SYSCTL
 struct ctl_table firmware_config_table[] = {
diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c
index 76f79913916d..5296aaca35cf 100644
--- a/drivers/base/firmware_loader/main.c
+++ b/drivers/base/firmware_loader/main.c
@@ -548,9 +548,6 @@ static void firmware_free_data(const struct firmware *fw)
 static void fw_set_page_data(struct fw_priv *fw_priv, struct firmware *fw)
 {
 	fw->priv = fw_priv;
-#ifdef CONFIG_FW_LOADER_USER_HELPER
-	fw->pages = fw_priv->pages;
-#endif
 	fw->size = fw_priv->size;
 	fw->data = fw_priv->data;
 
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index dbec3a05590a..2b09b68b9f78 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -21,6 +21,7 @@
 #include <linux/mm.h>
 #include <linux/stat.h>
 #include <linux/slab.h>
+#include <linux/xarray.h>
 
 #include <linux/atomic.h>
 #include <linux/uaccess.h>
@@ -74,6 +75,13 @@ static struct bus_type memory_subsys = {
 	.offline = memory_subsys_offline,
 };
 
+/*
+ * Memory blocks are cached in a local radix tree to avoid
+ * a costly linear search for the corresponding device on
+ * the subsystem bus.
+ */
+static DEFINE_XARRAY(memory_blocks);
+
 static BLOCKING_NOTIFIER_HEAD(memory_chain);
 
 int register_memory_notifier(struct notifier_block *nb)
@@ -489,22 +497,23 @@ int __weak arch_get_memory_phys_device(unsigned long start_pfn)
 	return 0;
 }
 
-/* A reference for the returned memory block device is acquired. */
+/*
+ * A reference for the returned memory block device is acquired.
+ *
+ * Called under device_hotplug_lock.
+ */
 static struct memory_block *find_memory_block_by_id(unsigned long block_id)
 {
-	struct device *dev;
+	struct memory_block *mem;
 
-	dev = subsys_find_device_by_id(&memory_subsys, block_id, NULL);
-	return dev ? to_memory_block(dev) : NULL;
+	mem = xa_load(&memory_blocks, block_id);
+	if (mem)
+		get_device(&mem->dev);
+	return mem;
 }
 
 /*
- * For now, we have a linear search to go find the appropriate
- * memory_block corresponding to a particular phys_index. If
- * this gets to be a real problem, we can always use a radix
- * tree or something here.
- *
- * This could be made generic for all device subsystems.
+ * Called under device_hotplug_lock.
  */
 struct memory_block *find_memory_block(struct mem_section *section)
 {
@@ -548,9 +557,16 @@ int register_memory(struct memory_block *memory)
 	memory->dev.offline = memory->state == MEM_OFFLINE;
 
 	ret = device_register(&memory->dev);
-	if (ret)
+	if (ret) {
 		put_device(&memory->dev);
-
+		return ret;
+	}
+	ret = xa_err(xa_store(&memory_blocks, memory->dev.id, memory,
+			      GFP_KERNEL));
+	if (ret) {
+		put_device(&memory->dev);
+		device_unregister(&memory->dev);
+	}
 	return ret;
 }
 
@@ -604,6 +620,8 @@ static void unregister_memory(struct memory_block *memory)
 	if (WARN_ON_ONCE(memory->dev.bus != &memory_subsys))
 		return;
 
+	WARN_ON(xa_erase(&memory_blocks, memory->dev.id) == NULL);
+
 	/* drop the ref. we got via find_memory_block() */
 	put_device(&memory->dev);
 	device_unregister(&memory->dev);
@@ -750,6 +768,8 @@ void __init memory_dev_init(void)
  *
  * In case func() returns an error, walking is aborted and the error is
  * returned.
+ *
+ * Called under device_hotplug_lock.
  */
 int walk_memory_blocks(unsigned long start, unsigned long size,
 		       void *arg, walk_memory_blocks_func_t func)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 5255550b7c34..4ab8f895599d 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -147,7 +147,8 @@ EXPORT_SYMBOL_GPL(devm_platform_ioremap_resource_byname);
  * request_irq() APIs. This is the same as platform_get_irq(), except that it
  * does not print an error message if an IRQ can not be obtained.
  *
- * Example:
+ * For example::
+ *
  *		int irq = platform_get_irq_optional(pdev, 0);
  *		if (irq < 0)
  *			return irq;
@@ -226,7 +227,8 @@ EXPORT_SYMBOL_GPL(platform_get_irq_optional);
  * IRQ fails. Device drivers should check the return value for errors so as to
  * not pass a negative integer value to the request_irq() APIs.
  *
- * Example:
+ * For example::
+ *
  *		int irq = platform_get_irq(pdev, 0);
  *		if (irq < 0)
  *			return irq;
@@ -380,6 +382,8 @@ struct platform_object {
  */
 static void setup_pdev_dma_masks(struct platform_device *pdev)
 {
+	pdev->dev.dma_parms = &pdev->dma_parms;
+
 	if (!pdev->dev.coherent_dma_mask)
 		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 	if (!pdev->dev.dma_mask) {
@@ -668,7 +672,7 @@ EXPORT_SYMBOL_GPL(platform_device_unregister);
 struct platform_device *platform_device_register_full(
 		const struct platform_device_info *pdevinfo)
 {
-	int ret = -ENOMEM;
+	int ret;
 	struct platform_device *pdev;
 
 	pdev = platform_device_alloc(pdevinfo->name, pdevinfo->id);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 0e07e17c2def..9dd85bea4026 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -519,7 +519,7 @@ static void dpm_watchdog_handler(struct timer_list *t)
 	struct dpm_watchdog *wd = from_timer(wd, t, timer);
 
 	dev_emerg(wd->dev, "**** DPM device timeout ****\n");
-	show_stack(wd->tsk, NULL);
+	show_stack(wd->tsk, NULL, KERN_EMERG);
 	panic("%s %s: unrecoverable failure\n",
 		dev_driver_string(wd->dev), dev_name(wd->dev));
 }
@@ -562,72 +562,26 @@ static void dpm_watchdog_clear(struct dpm_watchdog *wd)
 /*------------------------- Resume routines -------------------------*/
 
 /**
- * suspend_event - Return a "suspend" message for given "resume" one.
- * @resume_msg: PM message representing a system-wide resume transition.
- */
-static pm_message_t suspend_event(pm_message_t resume_msg)
-{
-	switch (resume_msg.event) {
-	case PM_EVENT_RESUME:
-		return PMSG_SUSPEND;
-	case PM_EVENT_THAW:
-	case PM_EVENT_RESTORE:
-		return PMSG_FREEZE;
-	case PM_EVENT_RECOVER:
-		return PMSG_HIBERNATE;
-	}
-	return PMSG_ON;
-}
-
-/**
- * dev_pm_may_skip_resume - System-wide device resume optimization check.
+ * dev_pm_skip_resume - System-wide device resume optimization check.
  * @dev: Target device.
  *
- * Checks whether or not the device may be left in suspend after a system-wide
- * transition to the working state.
+ * Return:
+ * - %false if the transition under way is RESTORE.
+ * - Return value of dev_pm_skip_suspend() if the transition under way is THAW.
+ * - The logical negation of %power.must_resume otherwise (that is, when the
+ *   transition under way is RESUME).
  */
-bool dev_pm_may_skip_resume(struct device *dev)
+bool dev_pm_skip_resume(struct device *dev)
 {
-	return !dev->power.must_resume && pm_transition.event != PM_EVENT_RESTORE;
-}
-
-static pm_callback_t dpm_subsys_resume_noirq_cb(struct device *dev,
-						pm_message_t state,
-						const char **info_p)
-{
-	pm_callback_t callback;
-	const char *info;
-
-	if (dev->pm_domain) {
-		info = "noirq power domain ";
-		callback = pm_noirq_op(&dev->pm_domain->ops, state);
-	} else if (dev->type && dev->type->pm) {
-		info = "noirq type ";
-		callback = pm_noirq_op(dev->type->pm, state);
-	} else if (dev->class && dev->class->pm) {
-		info = "noirq class ";
-		callback = pm_noirq_op(dev->class->pm, state);
-	} else if (dev->bus && dev->bus->pm) {
-		info = "noirq bus ";
-		callback = pm_noirq_op(dev->bus->pm, state);
-	} else {
-		return NULL;
-	}
+	if (pm_transition.event == PM_EVENT_RESTORE)
+		return false;
 
-	if (info_p)
-		*info_p = info;
+	if (pm_transition.event == PM_EVENT_THAW)
+		return dev_pm_skip_suspend(dev);
 
-	return callback;
+	return !dev->power.must_resume;
 }
 
-static pm_callback_t dpm_subsys_suspend_noirq_cb(struct device *dev,
-						 pm_message_t state,
-						 const char **info_p);
-
-static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev,
-						pm_message_t state,
-						const char **info_p);
-
 /**
  * device_resume_noirq - Execute a "noirq resume" callback for given device.
  * @dev: Device to handle.
@@ -639,8 +593,8 @@ static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev,
  */
 static int device_resume_noirq(struct device *dev, pm_message_t state, bool async)
 {
-	pm_callback_t callback;
-	const char *info;
+	pm_callback_t callback = NULL;
+	const char *info = NULL;
 	bool skip_resume;
 	int error = 0;
 
@@ -656,37 +610,41 @@ static int device_resume_noirq(struct device *dev, pm_message_t state, bool asyn
 	if (!dpm_wait_for_superior(dev, async))
 		goto Out;
 
-	skip_resume = dev_pm_may_skip_resume(dev);
+	skip_resume = dev_pm_skip_resume(dev);
+	/*
+	 * If the driver callback is skipped below or by the middle layer
+	 * callback and device_resume_early() also skips the driver callback for
+	 * this device later, it needs to appear as "suspended" to PM-runtime,
+	 * so change its status accordingly.
+	 *
+	 * Otherwise, the device is going to be resumed, so set its PM-runtime
+	 * status to "active", but do that only if DPM_FLAG_SMART_SUSPEND is set
+	 * to avoid confusing drivers that don't use it.
+	 */
+	if (skip_resume)
+		pm_runtime_set_suspended(dev);
+	else if (dev_pm_skip_suspend(dev))
+		pm_runtime_set_active(dev);
 
-	callback = dpm_subsys_resume_noirq_cb(dev, state, &info);
+	if (dev->pm_domain) {
+		info = "noirq power domain ";
+		callback = pm_noirq_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "noirq type ";
+		callback = pm_noirq_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "noirq class ";
+		callback = pm_noirq_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "noirq bus ";
+		callback = pm_noirq_op(dev->bus->pm, state);
+	}
 	if (callback)
 		goto Run;
 
 	if (skip_resume)
 		goto Skip;
 
-	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		pm_message_t suspend_msg = suspend_event(state);
-
-		/*
-		 * If "freeze" callbacks have been skipped during a transition
-		 * related to hibernation, the subsequent "thaw" callbacks must
-		 * be skipped too or bad things may happen.  Otherwise, resume
-		 * callbacks are going to be run for the device, so its runtime
-		 * PM status must be changed to reflect the new state after the
-		 * transition under way.
-		 */
-		if (!dpm_subsys_suspend_late_cb(dev, suspend_msg, NULL) &&
-		    !dpm_subsys_suspend_noirq_cb(dev, suspend_msg, NULL)) {
-			if (state.event == PM_EVENT_THAW) {
-				skip_resume = true;
-				goto Skip;
-			} else {
-				pm_runtime_set_active(dev);
-			}
-		}
-	}
-
 	if (dev->driver && dev->driver->pm) {
 		info = "noirq driver ";
 		callback = pm_noirq_op(dev->driver->pm, state);
@@ -698,20 +656,6 @@ static int device_resume_noirq(struct device *dev, pm_message_t state, bool asyn
 Skip:
 	dev->power.is_noirq_suspended = false;
 
-	if (skip_resume) {
-		/* Make the next phases of resume skip the device. */
-		dev->power.is_late_suspended = false;
-		dev->power.is_suspended = false;
-		/*
-		 * The device is going to be left in suspend, but it might not
-		 * have been in runtime suspend before the system suspended, so
-		 * its runtime PM status needs to be updated to avoid confusing
-		 * the runtime PM framework when runtime PM is enabled for the
-		 * device again.
-		 */
-		pm_runtime_set_suspended(dev);
-	}
-
 Out:
 	complete_all(&dev->power.completion);
 	TRACE_RESUME(error);
@@ -810,35 +754,6 @@ void dpm_resume_noirq(pm_message_t state)
 	cpuidle_resume();
 }
 
-static pm_callback_t dpm_subsys_resume_early_cb(struct device *dev,
-						pm_message_t state,
-						const char **info_p)
-{
-	pm_callback_t callback;
-	const char *info;
-
-	if (dev->pm_domain) {
-		info = "early power domain ";
-		callback = pm_late_early_op(&dev->pm_domain->ops, state);
-	} else if (dev->type && dev->type->pm) {
-		info = "early type ";
-		callback = pm_late_early_op(dev->type->pm, state);
-	} else if (dev->class && dev->class->pm) {
-		info = "early class ";
-		callback = pm_late_early_op(dev->class->pm, state);
-	} else if (dev->bus && dev->bus->pm) {
-		info = "early bus ";
-		callback = pm_late_early_op(dev->bus->pm, state);
-	} else {
-		return NULL;
-	}
-
-	if (info_p)
-		*info_p = info;
-
-	return callback;
-}
-
 /**
  * device_resume_early - Execute an "early resume" callback for given device.
  * @dev: Device to handle.
@@ -849,8 +764,8 @@ static pm_callback_t dpm_subsys_resume_early_cb(struct device *dev,
  */
 static int device_resume_early(struct device *dev, pm_message_t state, bool async)
 {
-	pm_callback_t callback;
-	const char *info;
+	pm_callback_t callback = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -865,17 +780,37 @@ static int device_resume_early(struct device *dev, pm_message_t state, bool asyn
 	if (!dpm_wait_for_superior(dev, async))
 		goto Out;
 
-	callback = dpm_subsys_resume_early_cb(dev, state, &info);
+	if (dev->pm_domain) {
+		info = "early power domain ";
+		callback = pm_late_early_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "early type ";
+		callback = pm_late_early_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "early class ";
+		callback = pm_late_early_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "early bus ";
+		callback = pm_late_early_op(dev->bus->pm, state);
+	}
+	if (callback)
+		goto Run;
+
+	if (dev_pm_skip_resume(dev))
+		goto Skip;
 
-	if (!callback && dev->driver && dev->driver->pm) {
+	if (dev->driver && dev->driver->pm) {
 		info = "early driver ";
 		callback = pm_late_early_op(dev->driver->pm, state);
 	}
 
+Run:
 	error = dpm_run_callback(callback, dev, state, info);
+
+Skip:
 	dev->power.is_late_suspended = false;
 
- Out:
+Out:
 	TRACE_RESUME(error);
 
 	pm_runtime_enable(dev);
@@ -1245,61 +1180,6 @@ static void dpm_superior_set_must_resume(struct device *dev)
 	device_links_read_unlock(idx);
 }
 
-static pm_callback_t dpm_subsys_suspend_noirq_cb(struct device *dev,
-						 pm_message_t state,
-						 const char **info_p)
-{
-	pm_callback_t callback;
-	const char *info;
-
-	if (dev->pm_domain) {
-		info = "noirq power domain ";
-		callback = pm_noirq_op(&dev->pm_domain->ops, state);
-	} else if (dev->type && dev->type->pm) {
-		info = "noirq type ";
-		callback = pm_noirq_op(dev->type->pm, state);
-	} else if (dev->class && dev->class->pm) {
-		info = "noirq class ";
-		callback = pm_noirq_op(dev->class->pm, state);
-	} else if (dev->bus && dev->bus->pm) {
-		info = "noirq bus ";
-		callback = pm_noirq_op(dev->bus->pm, state);
-	} else {
-		return NULL;
-	}
-
-	if (info_p)
-		*info_p = info;
-
-	return callback;
-}
-
-static bool device_must_resume(struct device *dev, pm_message_t state,
-			       bool no_subsys_suspend_noirq)
-{
-	pm_message_t resume_msg = resume_event(state);
-
-	/*
-	 * If all of the device driver's "noirq", "late" and "early" callbacks
-	 * are invoked directly by the core, the decision to allow the device to
-	 * stay in suspend can be based on its current runtime PM status and its
-	 * wakeup settings.
-	 */
-	if (no_subsys_suspend_noirq &&
-	    !dpm_subsys_suspend_late_cb(dev, state, NULL) &&
-	    !dpm_subsys_resume_early_cb(dev, resume_msg, NULL) &&
-	    !dpm_subsys_resume_noirq_cb(dev, resume_msg, NULL))
-		return !pm_runtime_status_suspended(dev) &&
-			(resume_msg.event != PM_EVENT_RESUME ||
-			 (device_can_wakeup(dev) && !device_may_wakeup(dev)));
-
-	/*
-	 * The only safe strategy here is to require that if the device may not
-	 * be left in suspend, resume callbacks must be invoked for it.
-	 */
-	return !dev->power.may_skip_resume;
-}
-
 /**
  * __device_suspend_noirq - Execute a "noirq suspend" callback for given device.
  * @dev: Device to handle.
@@ -1311,9 +1191,8 @@ static bool device_must_resume(struct device *dev, pm_message_t state,
  */
 static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool async)
 {
-	pm_callback_t callback;
-	const char *info;
-	bool no_subsys_cb = false;
+	pm_callback_t callback = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -1327,13 +1206,23 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a
 	if (dev->power.syscore || dev->power.direct_complete)
 		goto Complete;
 
-	callback = dpm_subsys_suspend_noirq_cb(dev, state, &info);
+	if (dev->pm_domain) {
+		info = "noirq power domain ";
+		callback = pm_noirq_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "noirq type ";
+		callback = pm_noirq_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "noirq class ";
+		callback = pm_noirq_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "noirq bus ";
+		callback = pm_noirq_op(dev->bus->pm, state);
+	}
 	if (callback)
 		goto Run;
 
-	no_subsys_cb = !dpm_subsys_suspend_late_cb(dev, state, NULL);
-
-	if (dev_pm_smart_suspend_and_suspended(dev) && no_subsys_cb)
+	if (dev_pm_skip_suspend(dev))
 		goto Skip;
 
 	if (dev->driver && dev->driver->pm) {
@@ -1351,13 +1240,16 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a
 Skip:
 	dev->power.is_noirq_suspended = true;
 
-	if (dev_pm_test_driver_flags(dev, DPM_FLAG_LEAVE_SUSPENDED)) {
-		dev->power.must_resume = dev->power.must_resume ||
-				atomic_read(&dev->power.usage_count) > 1 ||
-				device_must_resume(dev, state, no_subsys_cb);
-	} else {
+	/*
+	 * Skipping the resume of devices that were in use right before the
+	 * system suspend (as indicated by their PM-runtime usage counters)
+	 * would be suboptimal.  Also resume them if doing that is not allowed
+	 * to be skipped.
+	 */
+	if (atomic_read(&dev->power.usage_count) > 1 ||
+	    !(dev_pm_test_driver_flags(dev, DPM_FLAG_MAY_SKIP_RESUME) &&
+	      dev->power.may_skip_resume))
 		dev->power.must_resume = true;
-	}
 
 	if (dev->power.must_resume)
 		dpm_superior_set_must_resume(dev);
@@ -1474,35 +1366,6 @@ static void dpm_propagate_wakeup_to_parent(struct device *dev)
 	spin_unlock_irq(&parent->power.lock);
 }
 
-static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev,
-						pm_message_t state,
-						const char **info_p)
-{
-	pm_callback_t callback;
-	const char *info;
-
-	if (dev->pm_domain) {
-		info = "late power domain ";
-		callback = pm_late_early_op(&dev->pm_domain->ops, state);
-	} else if (dev->type && dev->type->pm) {
-		info = "late type ";
-		callback = pm_late_early_op(dev->type->pm, state);
-	} else if (dev->class && dev->class->pm) {
-		info = "late class ";
-		callback = pm_late_early_op(dev->class->pm, state);
-	} else if (dev->bus && dev->bus->pm) {
-		info = "late bus ";
-		callback = pm_late_early_op(dev->bus->pm, state);
-	} else {
-		return NULL;
-	}
-
-	if (info_p)
-		*info_p = info;
-
-	return callback;
-}
-
 /**
  * __device_suspend_late - Execute a "late suspend" callback for given device.
  * @dev: Device to handle.
@@ -1513,8 +1376,8 @@ static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev,
  */
 static int __device_suspend_late(struct device *dev, pm_message_t state, bool async)
 {
-	pm_callback_t callback;
-	const char *info;
+	pm_callback_t callback = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -1535,12 +1398,23 @@ static int __device_suspend_late(struct device *dev, pm_message_t state, bool as
 	if (dev->power.syscore || dev->power.direct_complete)
 		goto Complete;
 
-	callback = dpm_subsys_suspend_late_cb(dev, state, &info);
+	if (dev->pm_domain) {
+		info = "late power domain ";
+		callback = pm_late_early_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "late type ";
+		callback = pm_late_early_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "late class ";
+		callback = pm_late_early_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "late bus ";
+		callback = pm_late_early_op(dev->bus->pm, state);
+	}
 	if (callback)
 		goto Run;
 
-	if (dev_pm_smart_suspend_and_suspended(dev) &&
-	    !dpm_subsys_suspend_noirq_cb(dev, state, NULL))
+	if (dev_pm_skip_suspend(dev))
 		goto Skip;
 
 	if (dev->driver && dev->driver->pm) {
@@ -1766,7 +1640,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 		dev->power.direct_complete = false;
 	}
 
-	dev->power.may_skip_resume = false;
+	dev->power.may_skip_resume = true;
 	dev->power.must_resume = false;
 
 	dpm_watchdog_set(&wd, dev);
@@ -1970,7 +1844,7 @@ static int device_prepare(struct device *dev, pm_message_t state)
 	spin_lock_irq(&dev->power.lock);
 	dev->power.direct_complete = state.event == PM_EVENT_SUSPEND &&
 		(ret > 0 || dev->power.no_pm_callbacks) &&
-		!dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP);
+		!dev_pm_test_driver_flags(dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 	spin_unlock_irq(&dev->power.lock);
 	return 0;
 }
@@ -2128,7 +2002,7 @@ void device_pm_check_callbacks(struct device *dev)
 	spin_unlock_irq(&dev->power.lock);
 }
 
-bool dev_pm_smart_suspend_and_suspended(struct device *dev)
+bool dev_pm_skip_suspend(struct device *dev)
 {
 	return dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) &&
 		pm_runtime_status_suspended(dev);
diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c
index e72843fe41df..089e5dc7144a 100644
--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -227,6 +227,9 @@ static ssize_t regmap_read_debugfs(struct regmap *map, unsigned int from,
 	if (*ppos < 0 || !count)
 		return -EINVAL;
 
+	if (count > (PAGE_SIZE << (MAX_ORDER - 1)))
+		count = PAGE_SIZE << (MAX_ORDER - 1);
+
 	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -371,6 +374,9 @@ static ssize_t regmap_reg_ranges_read_file(struct file *file,
 	if (*ppos < 0 || !count)
 		return -EINVAL;
 
+	if (count > (PAGE_SIZE << (MAX_ORDER - 1)))
+		count = PAGE_SIZE << (MAX_ORDER - 1);
+
 	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c
index 008f8da69d97..62b95a9212ae 100644
--- a/drivers/base/regmap/regmap-i2c.c
+++ b/drivers/base/regmap/regmap-i2c.c
@@ -246,6 +246,63 @@ static const struct regmap_bus regmap_i2c_smbus_i2c_block = {
 	.max_raw_write = I2C_SMBUS_BLOCK_MAX,
 };
 
+static int regmap_i2c_smbus_i2c_write_reg16(void *context, const void *data,
+				      size_t count)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+
+	if (count < 2)
+		return -EINVAL;
+
+	count--;
+	return i2c_smbus_write_i2c_block_data(i2c, ((u8 *)data)[0], count,
+					      (u8 *)data + 1);
+}
+
+static int regmap_i2c_smbus_i2c_read_reg16(void *context, const void *reg,
+				     size_t reg_size, void *val,
+				     size_t val_size)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+	int ret, count, len = val_size;
+
+	if (reg_size != 2)
+		return -EINVAL;
+
+	ret = i2c_smbus_write_byte_data(i2c, ((u16 *)reg)[0] & 0xff,
+					((u16 *)reg)[0] >> 8);
+	if (ret < 0)
+		return ret;
+
+	count = 0;
+	do {
+		/* Current Address Read */
+		ret = i2c_smbus_read_byte(i2c);
+		if (ret < 0)
+			break;
+
+		*((u8 *)val++) = ret;
+		count++;
+		len--;
+	} while (len > 0);
+
+	if (count == val_size)
+		return 0;
+	else if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+
+static const struct regmap_bus regmap_i2c_smbus_i2c_block_reg16 = {
+	.write = regmap_i2c_smbus_i2c_write_reg16,
+	.read = regmap_i2c_smbus_i2c_read_reg16,
+	.max_raw_read = I2C_SMBUS_BLOCK_MAX,
+	.max_raw_write = I2C_SMBUS_BLOCK_MAX,
+};
+
 static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
 					const struct regmap_config *config)
 {
@@ -255,6 +312,10 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
 		 i2c_check_functionality(i2c->adapter,
 					 I2C_FUNC_SMBUS_I2C_BLOCK))
 		return &regmap_i2c_smbus_i2c_block;
+	else if (config->val_bits == 8 && config->reg_bits == 16 &&
+		i2c_check_functionality(i2c->adapter,
+					I2C_FUNC_SMBUS_I2C_BLOCK))
+		return &regmap_i2c_smbus_i2c_block_reg16;
 	else if (config->val_bits == 16 && config->reg_bits == 8 &&
 		 i2c_check_functionality(i2c->adapter,
 					 I2C_FUNC_SMBUS_WORD_DATA))
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 3d64c9331a82..4340e1d268b6 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -541,8 +541,9 @@ static const struct irq_domain_ops regmap_domain_ops = {
 };
 
 /**
- * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
+ * regmap_add_irq_chip_np() - Use standard regmap IRQ controller handling
  *
+ * @np: The device_node where the IRQ domain should be added to.
  * @map: The regmap for the device.
  * @irq: The IRQ the device uses to signal interrupts.
  * @irq_flags: The IRQF_ flags to use for the primary interrupt.
@@ -556,9 +557,10 @@ static const struct irq_domain_ops regmap_domain_ops = {
  * register cache.  The chip driver is responsible for restoring the
  * register values used by the IRQ controller over suspend and resume.
  */
-int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
-			int irq_base, const struct regmap_irq_chip *chip,
-			struct regmap_irq_chip_data **data)
+int regmap_add_irq_chip_np(struct device_node *np, struct regmap *map, int irq,
+			   int irq_flags, int irq_base,
+			   const struct regmap_irq_chip *chip,
+			   struct regmap_irq_chip_data **data)
 {
 	struct regmap_irq_chip_data *d;
 	int i;
@@ -769,12 +771,10 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 	}
 
 	if (irq_base)
-		d->domain = irq_domain_add_legacy(map->dev->of_node,
-						  chip->num_irqs, irq_base, 0,
-						  &regmap_domain_ops, d);
+		d->domain = irq_domain_add_legacy(np, chip->num_irqs, irq_base,
+						  0, &regmap_domain_ops, d);
 	else
-		d->domain = irq_domain_add_linear(map->dev->of_node,
-						  chip->num_irqs,
+		d->domain = irq_domain_add_linear(np, chip->num_irqs,
 						  &regmap_domain_ops, d);
 	if (!d->domain) {
 		dev_err(map->dev, "Failed to create IRQ domain\n");
@@ -808,6 +808,30 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 	kfree(d);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(regmap_add_irq_chip_np);
+
+/**
+ * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
+ *
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts.
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success.
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * This is the same as regmap_add_irq_chip_np, except that the device
+ * node of the regmap is used.
+ */
+int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
+			int irq_base, const struct regmap_irq_chip *chip,
+			struct regmap_irq_chip_data **data)
+{
+	return regmap_add_irq_chip_np(map->dev->of_node, map, irq, irq_flags,
+				      irq_base, chip, data);
+}
 EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
 
 /**
@@ -875,9 +899,10 @@ static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data)
 }
 
 /**
- * devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip()
+ * devm_regmap_add_irq_chip_np() - Resource manager regmap_add_irq_chip_np()
  *
  * @dev: The device pointer on which irq_chip belongs to.
+ * @np: The device_node where the IRQ domain should be added to.
  * @map: The regmap for the device.
  * @irq: The IRQ the device uses to signal interrupts
  * @irq_flags: The IRQF_ flags to use for the primary interrupt.
@@ -890,10 +915,11 @@ static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data)
  * The &regmap_irq_chip_data will be automatically released when the device is
  * unbound.
  */
-int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
-			     int irq_flags, int irq_base,
-			     const struct regmap_irq_chip *chip,
-			     struct regmap_irq_chip_data **data)
+int devm_regmap_add_irq_chip_np(struct device *dev, struct device_node *np,
+				struct regmap *map, int irq, int irq_flags,
+				int irq_base,
+				const struct regmap_irq_chip *chip,
+				struct regmap_irq_chip_data **data)
 {
 	struct regmap_irq_chip_data **ptr, *d;
 	int ret;
@@ -903,8 +929,8 @@ int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
 	if (!ptr)
 		return -ENOMEM;
 
-	ret = regmap_add_irq_chip(map, irq, irq_flags, irq_base,
-				  chip, &d);
+	ret = regmap_add_irq_chip_np(np, map, irq, irq_flags, irq_base,
+				     chip, &d);
 	if (ret < 0) {
 		devres_free(ptr);
 		return ret;
@@ -915,6 +941,32 @@ int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
 	*data = d;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip_np);
+
+/**
+ * devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip()
+ *
+ * @dev: The device pointer on which irq_chip belongs to.
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * The &regmap_irq_chip_data will be automatically released when the device is
+ * unbound.
+ */
+int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
+			     int irq_flags, int irq_base,
+			     const struct regmap_irq_chip *chip,
+			     struct regmap_irq_chip_data **data)
+{
+	return devm_regmap_add_irq_chip_np(dev, map->dev->of_node, map, irq,
+					   irq_flags, irq_base, chip, data);
+}
 EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip);
 
 /**
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 59f911e57719..553d92aa0c68 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -827,6 +827,7 @@ struct regmap *__regmap_init(struct device *dev,
 	} else if (!bus->read || !bus->write) {
 		map->reg_read = _regmap_bus_reg_read;
 		map->reg_write = _regmap_bus_reg_write;
+		map->reg_update_bits = bus->reg_update_bits;
 
 		map->defer_caching = false;
 		goto skip_format_initialization;
diff --git a/drivers/base/soc.c b/drivers/base/soc.c
index 4af11a423475..a5bae551167d 100644
--- a/drivers/base/soc.c
+++ b/drivers/base/soc.c
@@ -46,7 +46,7 @@ static umode_t soc_attribute_mode(struct kobject *kobj,
 				struct attribute *attr,
 				int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
 
 	if ((attr == &dev_attr_machine.attr)
diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
index de8d3543e8fe..2079937ddb51 100644
--- a/drivers/base/swnode.c
+++ b/drivers/base/swnode.c
@@ -726,6 +726,54 @@ void software_node_unregister_nodes(const struct software_node *nodes)
 }
 EXPORT_SYMBOL_GPL(software_node_unregister_nodes);
 
+/**
+ * software_node_register_node_group - Register a group of software nodes
+ * @node_group: NULL terminated array of software node pointers to be registered
+ *
+ * Register multiple software nodes at once.
+ */
+int software_node_register_node_group(const struct software_node **node_group)
+{
+	unsigned int i;
+	int ret;
+
+	if (!node_group)
+		return 0;
+
+	for (i = 0; node_group[i]; i++) {
+		ret = software_node_register(node_group[i]);
+		if (ret) {
+			software_node_unregister_node_group(node_group);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(software_node_register_node_group);
+
+/**
+ * software_node_unregister_node_group - Unregister a group of software nodes
+ * @node_group: NULL terminated array of software node pointers to be unregistered
+ *
+ * Unregister multiple software nodes at once.
+ */
+void software_node_unregister_node_group(const struct software_node **node_group)
+{
+	struct swnode *swnode;
+	unsigned int i;
+
+	if (!node_group)
+		return;
+
+	for (i = 0; node_group[i]; i++) {
+		swnode = software_node_to_swnode(node_group[i]);
+		if (swnode)
+			fwnode_remove_software_node(&swnode->fwnode);
+	}
+}
+EXPORT_SYMBOL_GPL(software_node_unregister_node_group);
+
 /**
  * software_node_register - Register static software node
  * @node: The software node to be registered
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c
index 15e99697234a..df53dca5d02c 100644
--- a/drivers/block/drbd/drbd_bitmap.c
+++ b/drivers/block/drbd/drbd_bitmap.c
@@ -396,9 +396,7 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want)
 	bytes = sizeof(struct page *)*want;
 	new_pages = kzalloc(bytes, GFP_NOIO | __GFP_NOWARN);
 	if (!new_pages) {
-		new_pages = __vmalloc(bytes,
-				GFP_NOIO | __GFP_ZERO,
-				PAGE_KERNEL);
+		new_pages = __vmalloc(bytes, GFP_NOIO | __GFP_ZERO);
 		if (!new_pages)
 			return NULL;
 	}
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index aae99a2d7bd4..a3314dd781a7 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -620,7 +620,7 @@ struct fifo_buffer {
 	unsigned int head_index;
 	unsigned int size;
 	int total; /* sum of all values */
-	int values[0];
+	int values[];
 };
 extern struct fifo_buffer *fifo_alloc(unsigned int fifo_size);
 
diff --git a/drivers/block/drbd/drbd_protocol.h b/drivers/block/drbd/drbd_protocol.h
index e6fc5ad72501..dea59c92ecc1 100644
--- a/drivers/block/drbd/drbd_protocol.h
+++ b/drivers/block/drbd/drbd_protocol.h
@@ -271,7 +271,7 @@ struct p_rs_param {
 	u32 resync_rate;
 
 	      /* Since protocol version 88 and higher. */
-	char verify_alg[0];
+	char verify_alg[];
 } __packed;
 
 struct p_rs_param_89 {
@@ -305,7 +305,7 @@ struct p_protocol {
 	u32 two_primaries;
 
 	/* Since protocol version 87 and higher. */
-	char integrity_alg[0];
+	char integrity_alg[];
 
 } __packed;
 
@@ -360,7 +360,7 @@ struct p_sizes {
 	u16	    dds_flags; /* use enum dds_flags here. */
 
 	/* optional queue_limits if (agreed_features & DRBD_FF_WSAME) */
-	struct o_qlim qlim[0];
+	struct o_qlim qlim[];
 } __packed;
 
 struct p_state {
@@ -409,7 +409,7 @@ struct p_compressed_bm {
 	 */
 	u8 encoding;
 
-	u8 code[0];
+	u8 code[];
 } __packed;
 
 struct p_delay_probe93 {
diff --git a/drivers/block/rbd_types.h b/drivers/block/rbd_types.h
index ac98ab6ccd3b..a600e0eb6b6f 100644
--- a/drivers/block/rbd_types.h
+++ b/drivers/block/rbd_types.h
@@ -93,7 +93,7 @@ struct rbd_image_header_ondisk {
 	__le32 snap_count;
 	__le32 reserved;
 	__le64 snap_names_len;
-	struct rbd_image_snap_ondisk snaps[0];
+	struct rbd_image_snap_ondisk snaps[];
 } __attribute__((packed));
 
 
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 1f498f358f60..df7a8a22e53c 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -27,6 +27,11 @@
 #define BDADDR_BCM4345C5 (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0xc5, 0x45, 0x43}})
 #define BDADDR_BCM43341B (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0x1b, 0x34, 0x43}})
 
+#define BCM_FW_NAME_LEN			64
+#define BCM_FW_NAME_COUNT_MAX		2
+/* For kmalloc-ing the fw-name array instead of putting it on the stack */
+typedef char bcm_fw_name[BCM_FW_NAME_LEN];
+
 int btbcm_check_bdaddr(struct hci_dev *hdev)
 {
 	struct hci_rp_read_bd_addr *bda;
@@ -358,6 +363,13 @@ static int btbcm_read_info(struct hci_dev *hdev)
 	bt_dev_info(hdev, "BCM: features 0x%2.2x", skb->data[1]);
 	kfree_skb(skb);
 
+	return 0;
+}
+
+static int btbcm_print_local_name(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
 	/* Read Local Name */
 	skb = btbcm_read_local_name(hdev);
 	if (IS_ERR(skb))
@@ -380,6 +392,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x410e, "BCM43341B0"	},	/* 002.001.014 */
 	{ 0x4204, "BCM2076B1"	},	/* 002.002.004 */
 	{ 0x4406, "BCM4324B3"	},	/* 002.004.006 */
+	{ 0x4606, "BCM4324B5"	},	/* 002.006.006 */
 	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
 	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
 	{ 0x2122, "BCM4343A0"	},	/* 001.001.034 */
@@ -395,6 +408,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 };
 
 static const struct bcm_subver_table bcm_usb_subver_table[] = {
+	{ 0x2105, "BCM20703A1"	},	/* 001.001.005 */
 	{ 0x210b, "BCM43142A0"	},	/* 001.001.011 */
 	{ 0x2112, "BCM4314A0"	},	/* 001.001.018 */
 	{ 0x2118, "BCM20702A0"	},	/* 001.001.024 */
@@ -408,14 +422,17 @@ static const struct bcm_subver_table bcm_usb_subver_table[] = {
 	{ }
 };
 
-int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len,
-		     bool reinit)
+int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done)
 {
 	u16 subver, rev, pid, vid;
-	const char *hw_name = "BCM";
 	struct sk_buff *skb;
 	struct hci_rp_read_local_version *ver;
 	const struct bcm_subver_table *bcm_subver_table;
+	const char *hw_name = NULL;
+	char postfix[16] = "";
+	int fw_name_count = 0;
+	bcm_fw_name *fw_name;
+	const struct firmware *fw;
 	int i, err;
 
 	/* Reset */
@@ -434,15 +451,14 @@ int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len,
 	kfree_skb(skb);
 
 	/* Read controller information */
-	if (!reinit) {
+	if (!(*fw_load_done)) {
 		err = btbcm_read_info(hdev);
 		if (err)
 			return err;
 	}
-
-	/* Upper nibble of rev should be between 0 and 3? */
-	if (((rev & 0xf000) >> 12) > 3)
-		return 0;
+	err = btbcm_print_local_name(hdev);
+	if (err)
+		return err;
 
 	bcm_subver_table = (hdev->bus == HCI_USB) ? bcm_usb_subver_table :
 						    bcm_uart_subver_table;
@@ -454,6 +470,13 @@ int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len,
 		}
 	}
 
+	bt_dev_info(hdev, "%s (%3.3u.%3.3u.%3.3u) build %4.4u",
+		    hw_name ? hw_name : "BCM", (subver & 0xe000) >> 13,
+		    (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+	if (*fw_load_done)
+		return 0;
+
 	if (hdev->bus == HCI_USB) {
 		/* Read USB Product Info */
 		skb = btbcm_read_usb_product(hdev);
@@ -464,85 +487,81 @@ int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len,
 		pid = get_unaligned_le16(skb->data + 3);
 		kfree_skb(skb);
 
-		snprintf(fw_name, len, "brcm/%s-%4.4x-%4.4x.hcd",
-			 hw_name, vid, pid);
-	} else {
-		snprintf(fw_name, len, "brcm/%s.hcd", hw_name);
+		snprintf(postfix, sizeof(postfix), "-%4.4x-%4.4x", vid, pid);
 	}
 
-	bt_dev_info(hdev, "%s (%3.3u.%3.3u.%3.3u) build %4.4u",
-		    hw_name, (subver & 0xe000) >> 13,
-		    (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+	fw_name = kmalloc(BCM_FW_NAME_COUNT_MAX * BCM_FW_NAME_LEN, GFP_KERNEL);
+	if (!fw_name)
+		return -ENOMEM;
+
+	if (hw_name) {
+		snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
+			 "brcm/%s%s.hcd", hw_name, postfix);
+		fw_name_count++;
+	}
+
+	snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
+		 "brcm/BCM%s.hcd", postfix);
+	fw_name_count++;
+
+	for (i = 0; i < fw_name_count; i++) {
+		err = firmware_request_nowarn(&fw, fw_name[i], &hdev->dev);
+		if (err == 0) {
+			bt_dev_info(hdev, "%s '%s' Patch",
+				    hw_name ? hw_name : "BCM", fw_name[i]);
+			*fw_load_done = true;
+			break;
+		}
+	}
+
+	if (*fw_load_done) {
+		err = btbcm_patchram(hdev, fw);
+		if (err)
+			bt_dev_info(hdev, "BCM: Patch failed (%d)", err);
+
+		release_firmware(fw);
+	} else {
+		bt_dev_err(hdev, "BCM: firmware Patch file not found, tried:");
+		for (i = 0; i < fw_name_count; i++)
+			bt_dev_err(hdev, "BCM: '%s'", fw_name[i]);
+	}
 
+	kfree(fw_name);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(btbcm_initialize);
 
-int btbcm_finalize(struct hci_dev *hdev)
+int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done)
 {
-	char fw_name[64];
 	int err;
 
-	/* Re-initialize */
-	err = btbcm_initialize(hdev, fw_name, sizeof(fw_name), true);
-	if (err)
-		return err;
+	/* Re-initialize if necessary */
+	if (*fw_load_done) {
+		err = btbcm_initialize(hdev, fw_load_done);
+		if (err)
+			return err;
+	}
 
 	btbcm_check_bdaddr(hdev);
 
 	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 
-	/* Some devices ship with the controller default address.
-	 * Allow the bootloader to set a valid address through the
-	 * device tree.
-	 */
-	set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(btbcm_finalize);
 
 int btbcm_setup_patchram(struct hci_dev *hdev)
 {
-	char fw_name[64];
-	const struct firmware *fw;
-	struct sk_buff *skb;
+	bool fw_load_done = false;
 	int err;
 
 	/* Initialize */
-	err = btbcm_initialize(hdev, fw_name, sizeof(fw_name), false);
+	err = btbcm_initialize(hdev, &fw_load_done);
 	if (err)
 		return err;
 
-	err = request_firmware(&fw, fw_name, &hdev->dev);
-	if (err < 0) {
-		bt_dev_info(hdev, "BCM: Patch %s not found", fw_name);
-		goto done;
-	}
-
-	btbcm_patchram(hdev, fw);
-
-	release_firmware(fw);
-
-	/* Re-initialize */
-	err = btbcm_initialize(hdev, fw_name, sizeof(fw_name), true);
-	if (err)
-		return err;
-
-	/* Read Local Name */
-	skb = btbcm_read_local_name(hdev);
-	if (IS_ERR(skb))
-		return PTR_ERR(skb);
-
-	bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
-	kfree_skb(skb);
-
-done:
-	btbcm_check_bdaddr(hdev);
-
-	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
-
-	return 0;
+	/* Re-initialize after loading Patch */
+	return btbcm_finalize(hdev, &fw_load_done);
 }
 EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
 
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
index 014ef847a486..8bf01565fdfc 100644
--- a/drivers/bluetooth/btbcm.h
+++ b/drivers/bluetooth/btbcm.h
@@ -62,9 +62,8 @@ int btbcm_write_pcm_int_params(struct hci_dev *hdev,
 int btbcm_setup_patchram(struct hci_dev *hdev);
 int btbcm_setup_apple(struct hci_dev *hdev);
 
-int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len,
-		     bool reinit);
-int btbcm_finalize(struct hci_dev *hdev);
+int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done);
+int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done);
 
 #else
 
@@ -105,13 +104,12 @@ static inline int btbcm_setup_apple(struct hci_dev *hdev)
 	return 0;
 }
 
-static inline int btbcm_initialize(struct hci_dev *hdev, char *fw_name,
-				   size_t len, bool reinit)
+static inline int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done)
 {
 	return 0;
 }
 
-static inline int btbcm_finalize(struct hci_dev *hdev)
+static inline int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done)
 {
 	return 0;
 }
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index a16845c0751d..3ea866d44568 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -32,7 +32,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
 	 * VSE event. WCN3991 sends version command response as a payload to
 	 * command complete event.
 	 */
-	if (soc_type == QCA_WCN3991) {
+	if (soc_type >= QCA_WCN3991) {
 		event_type = 0;
 		rlen += 1;
 		rtype = EDL_PATCH_VER_REQ_CMD;
@@ -69,7 +69,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
 		goto out;
 	}
 
-	if (soc_type == QCA_WCN3991)
+	if (soc_type >= QCA_WCN3991)
 		memmove(&edl->data, &edl->data[1], sizeof(*ver));
 
 	ver = (struct qca_btsoc_version *)(edl->data);
@@ -217,7 +217,7 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
 				tlv_nvm->data[0] |= 0x80;
 
 				/* UART Baud Rate */
-				if (soc_type == QCA_WCN3991)
+				if (soc_type >= QCA_WCN3991)
 					tlv_nvm->data[1] = nvm_baud_rate;
 				else
 					tlv_nvm->data[2] = nvm_baud_rate;
@@ -268,7 +268,7 @@ static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
 	 * VSE event. WCN3991 sends version command response as a payload to
 	 * command complete event.
 	 */
-	if (soc_type == QCA_WCN3991) {
+	if (soc_type >= QCA_WCN3991) {
 		event_type = 0;
 		rlen = sizeof(*edl);
 		rtype = EDL_PATCH_TLV_REQ_CMD;
@@ -301,7 +301,7 @@ static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
 		err = -EIO;
 	}
 
-	if (soc_type == QCA_WCN3991)
+	if (soc_type >= QCA_WCN3991)
 		goto out;
 
 	tlv_resp = (struct tlv_seg_resp *)(edl->data);
@@ -442,6 +442,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 			    (soc_ver & 0x0000000f);
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/crbtfw%02x.tlv", rom_ver);
+	} else if (soc_type == QCA_QCA6390) {
+		rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
+			    (soc_ver & 0x0000000f);
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/htbtfw%02x.tlv", rom_ver);
 	} else {
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/rampatch_%08x.bin", soc_ver);
@@ -464,6 +469,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	else if (qca_is_wcn399x(soc_type))
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/crnv%02x.bin", rom_ver);
+	else if (soc_type == QCA_QCA6390)
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/htnv%02x.bin", rom_ver);
 	else
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/nvm_%08x.bin", soc_ver);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index e16a4d650597..6e1e62dd4b95 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -125,8 +125,9 @@ enum qca_btsoc_type {
 	QCA_AR3002,
 	QCA_ROME,
 	QCA_WCN3990,
-	QCA_WCN3991,
 	QCA_WCN3998,
+	QCA_WCN3991,
+	QCA_QCA6390,
 };
 
 #if IS_ENABLED(CONFIG_BT_QCA)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 67f4bc21e7c5..3a9afc905f24 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -130,12 +130,19 @@ static const struct id_table ic_id_table[] = {
 	  .cfg_name = "rtl_bt/rtl8821c_config" },
 
 	/* 8761A */
-	{ IC_MATCH_FL_LMPSUBV, RTL_ROM_LMP_8761A, 0x0,
+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xa),
 	  .config_needed = false,
 	  .has_rom_version = true,
 	  .fw_name  = "rtl_bt/rtl8761a_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8761a_config" },
 
+	/* 8761B */
+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8761b_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8761b_config" },
+
 	/* 8822C with UART interface */
 	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
 			 IC_MATCH_FL_HCIBUS,
@@ -267,6 +274,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
 		{ RTL_ROM_LMP_8723B, 9 },	/* 8723D */
 		{ RTL_ROM_LMP_8821A, 10 },	/* 8821C */
 		{ RTL_ROM_LMP_8822B, 13 },	/* 8822C */
+		{ RTL_ROM_LMP_8761A, 14 },	/* 8761B */
 	};
 
 	min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3bdec42c9612..500a9922355c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -58,6 +58,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_CW6622		0x100000
 #define BTUSB_MEDIATEK		0x200000
 #define BTUSB_WIDEBAND_SPEECH	0x400000
+#define BTUSB_VALID_LE_STATES   0x800000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -335,11 +336,14 @@ static const struct usb_device_id blacklist_table[] = {
 
 	/* Intel Bluetooth devices */
 	{ USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_NEW |
-						     BTUSB_WIDEBAND_SPEECH },
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
 	{ USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_NEW |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_NEW |
+                                                     BTUSB_WIDEBAND_SPEECH},
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
 	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
@@ -348,7 +352,8 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW |
-						     BTUSB_WIDEBAND_SPEECH },
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
 
 	/* Other Intel Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
@@ -492,6 +497,8 @@ struct btusb_data {
 	__u8 cmdreq;
 
 	unsigned int sco_num;
+	unsigned int air_mode;
+	bool usb_alt6_packet_flow;
 	int isoc_altsetting;
 	int suspend_count;
 
@@ -983,6 +990,42 @@ static void btusb_isoc_complete(struct urb *urb)
 	}
 }
 
+static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len,
+					       int mtu, struct btusb_data *data)
+{
+	int i, offset = 0;
+	unsigned int interval;
+
+	BT_DBG("len %d mtu %d", len, mtu);
+
+	/* For mSBC ALT 6 setting the host will send the packet at continuous
+	 * flow. As per core spec 5, vol 4, part B, table 2.1. For ALT setting
+	 * 6 the HCI PACKET INTERVAL should be 7.5ms for every usb packets.
+	 * To maintain the rate we send 63bytes of usb packets alternatively for
+	 * 7ms and 8ms to maintain the rate as 7.5ms.
+	 */
+	if (data->usb_alt6_packet_flow) {
+		interval = 7;
+		data->usb_alt6_packet_flow = false;
+	} else {
+		interval = 6;
+		data->usb_alt6_packet_flow = true;
+	}
+
+	for (i = 0; i < interval; i++) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = offset;
+	}
+
+	if (len && i < BTUSB_MAX_ISOC_FRAMES) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = len;
+		i++;
+	}
+
+	urb->number_of_packets = i;
+}
+
 static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
 {
 	int i, offset = 0;
@@ -1386,9 +1429,13 @@ static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
 
 	urb->transfer_flags  = URB_ISO_ASAP;
 
-	__fill_isoc_descriptor(urb, skb->len,
-			       le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
-
+	if (data->isoc_altsetting == 6)
+		__fill_isoc_descriptor_msbc(urb, skb->len,
+					    le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize),
+					    data);
+	else
+		__fill_isoc_descriptor(urb, skb->len,
+				       le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
 	skb->dev = (void *)hdev;
 
 	return urb;
@@ -1484,6 +1531,7 @@ static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
 
 	if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
 		data->sco_num = hci_conn_num(hdev, SCO_LINK);
+		data->air_mode = evt;
 		schedule_work(&data->work);
 	}
 }
@@ -1531,11 +1579,70 @@ static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
 	return 0;
 }
 
+static int btusb_switch_alt_setting(struct hci_dev *hdev, int new_alts)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	if (data->isoc_altsetting != new_alts) {
+		unsigned long flags;
+
+		clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+		usb_kill_anchored_urbs(&data->isoc_anchor);
+
+		/* When isochronous alternate setting needs to be
+		 * changed, because SCO connection has been added
+		 * or removed, a packet fragment may be left in the
+		 * reassembling state. This could lead to wrongly
+		 * assembled fragments.
+		 *
+		 * Clear outstanding fragment when selecting a new
+		 * alternate setting.
+		 */
+		spin_lock_irqsave(&data->rxlock, flags);
+		kfree_skb(data->sco_skb);
+		data->sco_skb = NULL;
+		spin_unlock_irqrestore(&data->rxlock, flags);
+
+		err = __set_isoc_interface(hdev, new_alts);
+		if (err < 0)
+			return err;
+	}
+
+	if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
+		if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
+			clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+		else
+			btusb_submit_isoc_urb(hdev, GFP_KERNEL);
+	}
+
+	return 0;
+}
+
+static struct usb_host_interface *btusb_find_altsetting(struct btusb_data *data,
+							int alt)
+{
+	struct usb_interface *intf = data->isoc;
+	int i;
+
+	BT_DBG("Looking for Alt no :%d", alt);
+
+	if (!intf)
+		return NULL;
+
+	for (i = 0; i < intf->num_altsetting; i++) {
+		if (intf->altsetting[i].desc.bAlternateSetting == alt)
+			return &intf->altsetting[i];
+	}
+
+	return NULL;
+}
+
 static void btusb_work(struct work_struct *work)
 {
 	struct btusb_data *data = container_of(work, struct btusb_data, work);
 	struct hci_dev *hdev = data->hdev;
-	int new_alts;
+	int new_alts = 0;
 	int err;
 
 	if (data->sco_num > 0) {
@@ -1550,44 +1657,27 @@ static void btusb_work(struct work_struct *work)
 			set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
 		}
 
-		if (hdev->voice_setting & 0x0020) {
-			static const int alts[3] = { 2, 4, 5 };
+		if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_CVSD) {
+			if (hdev->voice_setting & 0x0020) {
+				static const int alts[3] = { 2, 4, 5 };
 
-			new_alts = alts[data->sco_num - 1];
-		} else {
-			new_alts = data->sco_num;
-		}
-
-		if (data->isoc_altsetting != new_alts) {
-			unsigned long flags;
-
-			clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
-			usb_kill_anchored_urbs(&data->isoc_anchor);
-
-			/* When isochronous alternate setting needs to be
-			 * changed, because SCO connection has been added
-			 * or removed, a packet fragment may be left in the
-			 * reassembling state. This could lead to wrongly
-			 * assembled fragments.
-			 *
-			 * Clear outstanding fragment when selecting a new
-			 * alternate setting.
-			 */
-			spin_lock_irqsave(&data->rxlock, flags);
-			kfree_skb(data->sco_skb);
-			data->sco_skb = NULL;
-			spin_unlock_irqrestore(&data->rxlock, flags);
+				new_alts = alts[data->sco_num - 1];
+			} else {
+				new_alts = data->sco_num;
+			}
+		} else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) {
 
-			if (__set_isoc_interface(hdev, new_alts) < 0)
-				return;
-		}
+			data->usb_alt6_packet_flow = true;
 
-		if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
-			if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
-				clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+			/* Check if Alt 6 is supported for Transparent audio */
+			if (btusb_find_altsetting(data, 6))
+				new_alts = 6;
 			else
-				btusb_submit_isoc_urb(hdev, GFP_KERNEL);
+				bt_dev_err(hdev, "Device does not support ALT setting 6");
 		}
+
+		if (btusb_switch_alt_setting(hdev, new_alts) < 0)
+			bt_dev_err(hdev, "set USB alt:(%d) failed!", new_alts);
 	} else {
 		clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
 		usb_kill_anchored_urbs(&data->isoc_anchor);
@@ -2252,7 +2342,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	if (ver.fw_variant == 0x23) {
 		clear_bit(BTUSB_BOOTLOADER, &data->flags);
 		btintel_check_bdaddr(hdev);
-		return 0;
+		goto finish;
 	}
 
 	/* If the device is not in bootloader mode, then the only possible
@@ -2452,6 +2542,23 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 */
 	btintel_load_ddc_config(hdev, fwname);
 
+	/* Read the Intel version information after loading the FW  */
+	err = btintel_read_version(hdev, &ver);
+	if (err)
+		return err;
+
+	btintel_version_info(hdev, &ver);
+
+finish:
+	/* All Intel controllers that support the Microsoft vendor
+	 * extension are using 0xFC1E for VsMsftOpCode.
+	 */
+	switch (ver.hw_variant) {
+	case 0x12:	/* ThP */
+		hci_set_msft_opcode(hdev, 0xFC1E);
+		break;
+	}
+
 	/* Set the event mask for Intel specific vendor events. This enables
 	 * a few extra events that are useful during general operation. It
 	 * does not enable any debugging related events.
@@ -2461,13 +2568,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 */
 	btintel_set_event_mask(hdev, false);
 
-	/* Read the Intel version information after loading the FW  */
-	err = btintel_read_version(hdev, &ver);
-	if (err)
-		return err;
-
-	btintel_version_info(hdev, &ver);
-
 	return 0;
 }
 
@@ -3877,6 +3977,9 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_WIDEBAND_SPEECH)
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
 
+	if (id->driver_info & BTUSB_VALID_LE_STATES)
+		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
 	if (id->driver_info & BTUSB_DIGIANSWER) {
 		data->cmdreq_type = USB_TYPE_VENDOR;
 		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index b236cb11c0dc..8ea5ca8d71d6 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -118,6 +118,7 @@ struct bcm_device {
 	u32			oper_speed;
 	int			irq;
 	bool			irq_active_low;
+	bool			irq_acquired;
 
 #ifdef CONFIG_PM
 	struct hci_uart		*hu;
@@ -333,6 +334,8 @@ static int bcm_request_irq(struct bcm_data *bcm)
 		goto unlock;
 	}
 
+	bdev->irq_acquired = true;
+
 	device_init_wakeup(bdev->dev, true);
 
 	pm_runtime_set_autosuspend_delay(bdev->dev,
@@ -514,7 +517,7 @@ static int bcm_close(struct hci_uart *hu)
 	}
 
 	if (bdev) {
-		if (IS_ENABLED(CONFIG_PM) && bdev->irq > 0) {
+		if (IS_ENABLED(CONFIG_PM) && bdev->irq_acquired) {
 			devm_free_irq(bdev->dev, bdev->irq, bdev);
 			device_init_wakeup(bdev->dev, false);
 			pm_runtime_disable(bdev->dev);
@@ -550,8 +553,7 @@ static int bcm_flush(struct hci_uart *hu)
 static int bcm_setup(struct hci_uart *hu)
 {
 	struct bcm_data *bcm = hu->priv;
-	char fw_name[64];
-	const struct firmware *fw;
+	bool fw_load_done = false;
 	unsigned int speed;
 	int err;
 
@@ -560,21 +562,12 @@ static int bcm_setup(struct hci_uart *hu)
 	hu->hdev->set_diag = bcm_set_diag;
 	hu->hdev->set_bdaddr = btbcm_set_bdaddr;
 
-	err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name), false);
+	err = btbcm_initialize(hu->hdev, &fw_load_done);
 	if (err)
 		return err;
 
-	err = request_firmware(&fw, fw_name, &hu->hdev->dev);
-	if (err < 0) {
-		bt_dev_info(hu->hdev, "BCM: Patch %s not found", fw_name);
+	if (!fw_load_done)
 		return 0;
-	}
-
-	err = btbcm_patchram(hu->hdev, fw);
-	if (err) {
-		bt_dev_info(hu->hdev, "BCM: Patch failed (%d)", err);
-		goto finalize;
-	}
 
 	/* Init speed if any */
 	if (hu->init_speed)
@@ -613,13 +606,16 @@ static int bcm_setup(struct hci_uart *hu)
 		btbcm_write_pcm_int_params(hu->hdev, &params);
 	}
 
-finalize:
-	release_firmware(fw);
-
-	err = btbcm_finalize(hu->hdev);
+	err = btbcm_finalize(hu->hdev, &fw_load_done);
 	if (err)
 		return err;
 
+	/* Some devices ship with the controller default address.
+	 * Allow the bootloader to set a valid address through the
+	 * device tree.
+	 */
+	set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hu->hdev->quirks);
+
 	if (!bcm_request_irq(bcm))
 		err = bcm_setup_sleep(hu);
 
@@ -1153,7 +1149,8 @@ static int bcm_of_probe(struct bcm_device *bdev)
 	device_property_read_u8_array(bdev->dev, "brcm,bt-pcm-int-params",
 				      bdev->pcm_int_params, 5);
 	bdev->irq = of_irq_get_byname(bdev->dev->of_node, "host-wakeup");
-
+	bdev->irq_active_low = irq_get_trigger_type(bdev->irq)
+			     & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW);
 	return 0;
 }
 
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 106c110efe56..e60b2e0773db 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -1018,6 +1018,8 @@ static const struct of_device_id rtl_bluetooth_of_match[] = {
 #ifdef CONFIG_BT_HCIUART_RTL
 	{ .compatible = "realtek,rtl8822cs-bt",
 	  .data = (const void *)&rtl_vnd },
+	{ .compatible = "realtek,rtl8723bs-bt",
+	  .data = (const void *)&rtl_vnd },
 #endif
 	{ },
 };
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 439392b1c043..b3fd07a6f812 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -26,6 +26,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/acpi.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/serdev.h>
@@ -596,10 +597,12 @@ static int qca_open(struct hci_uart *hu)
 
 	if (hu->serdev) {
 		qcadev = serdev_device_get_drvdata(hu->serdev);
-		if (qca_is_wcn399x(qcadev->btsoc_type)) {
+
+		if (qca_is_wcn399x(qcadev->btsoc_type))
 			hu->init_speed = qcadev->init_speed;
+
+		if (qcadev->oper_speed)
 			hu->oper_speed = qcadev->oper_speed;
-		}
 	}
 
 	timer_setup(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout, 0);
@@ -1596,7 +1599,7 @@ static int qca_setup(struct hci_uart *hu)
 	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 
 	bt_dev_info(hdev, "setting up %s",
-		qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME");
+		qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");
 
 retry:
 	ret = qca_power_on(hdev);
@@ -1665,10 +1668,10 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
-	if (qca_is_wcn399x(soc_type))
-		hu->hdev->set_bdaddr = qca_set_bdaddr;
-	else
+	if (soc_type == QCA_ROME)
 		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+	else
+		hu->hdev->set_bdaddr = qca_set_bdaddr;
 
 	return ret;
 }
@@ -1721,6 +1724,11 @@ static const struct qca_vreg_data qca_soc_data_wcn3998 = {
 	.num_vregs = 4,
 };
 
+static const struct qca_vreg_data qca_soc_data_qca6390 = {
+	.soc_type = QCA_QCA6390,
+	.num_vregs = 0,
+};
+
 static void qca_power_shutdown(struct hci_uart *hu)
 {
 	struct qca_serdev *qcadev;
@@ -1764,7 +1772,7 @@ static int qca_power_off(struct hci_dev *hdev)
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 
 	/* Stop sending shutdown command if soc crashes. */
-	if (qca_is_wcn399x(soc_type)
+	if (soc_type != QCA_ROME
 		&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
 		qca_send_pre_shutdown_cmd(hdev);
 		usleep_range(8000, 10000);
@@ -1865,6 +1873,11 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	serdev_device_set_drvdata(serdev, qcadev);
 	device_property_read_string(&serdev->dev, "firmware-name",
 					 &qcadev->firmware_name);
+	device_property_read_u32(&serdev->dev, "max-speed",
+				 &qcadev->oper_speed);
+	if (!qcadev->oper_speed)
+		BT_DBG("UART will pick default operating speed");
+
 	if (data && qca_is_wcn399x(data->soc_type)) {
 		qcadev->btsoc_type = data->soc_type;
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
@@ -1889,18 +1902,17 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 			return PTR_ERR(qcadev->susclk);
 		}
 
-		device_property_read_u32(&serdev->dev, "max-speed",
-					 &qcadev->oper_speed);
-		if (!qcadev->oper_speed)
-			BT_DBG("UART will pick default operating speed");
-
 		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
 		if (err) {
 			BT_ERR("wcn3990 serdev registration failed");
 			return err;
 		}
 	} else {
-		qcadev->btsoc_type = QCA_ROME;
+		if (data)
+			qcadev->btsoc_type = data->soc_type;
+		else
+			qcadev->btsoc_type = QCA_ROME;
+
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
 		if (!qcadev->bt_en) {
@@ -2044,21 +2056,38 @@ static int __maybe_unused qca_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
 
+#ifdef CONFIG_OF
 static const struct of_device_id qca_bluetooth_of_match[] = {
 	{ .compatible = "qcom,qca6174-bt" },
+	{ .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
+	{ .compatible = "qcom,qca9377-bt" },
 	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
 	{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
 	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
+	{ "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
+#endif
+
 
 static struct serdev_device_driver qca_serdev_driver = {
 	.probe = qca_serdev_probe,
 	.remove = qca_serdev_remove,
 	.driver = {
 		.name = "hci_uart_qca",
-		.of_match_table = qca_bluetooth_of_match,
+		.of_match_table = of_match_ptr(qca_bluetooth_of_match),
+		.acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
 		.pm = &qca_pm_ops,
 	},
 };
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index eb4256b81406..55928feea0c9 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -294,7 +294,7 @@ void mhi_create_devices(struct mhi_controller *mhi_cntrl)
 		    !(mhi_chan->ee_mask & BIT(mhi_cntrl->ee)))
 			continue;
 		mhi_dev = mhi_alloc_device(mhi_cntrl);
-		if (!mhi_dev)
+		if (IS_ERR(mhi_dev))
 			return;
 
 		mhi_dev->dev_type = MHI_DEVICE_XFER;
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index faca0f346fff..e3bbe108eb54 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -3631,7 +3631,7 @@ static void cdrom_update_settings(void)
 }
 
 static int cdrom_sysctl_handler(struct ctl_table *ctl, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 	
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 66a62d17a3f5..4b34a5195c65 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -846,6 +846,7 @@ void intel_gtt_insert_page(dma_addr_t addr,
 			   unsigned int flags)
 {
 	intel_private.driver->write_entry(addr, pg, flags);
+	readl(intel_private.gtt + pg);
 	if (intel_private.driver->chipset_flush)
 		intel_private.driver->chipset_flush();
 }
@@ -871,7 +872,7 @@ void intel_gtt_insert_sg_entries(struct sg_table *st,
 			j++;
 		}
 	}
-	wmb();
+	readl(intel_private.gtt + j - 1);
 	if (intel_private.driver->chipset_flush)
 		intel_private.driver->chipset_flush();
 }
@@ -1105,6 +1106,7 @@ static void i9xx_cleanup(void)
 
 static void i9xx_chipset_flush(void)
 {
+	wmb();
 	if (intel_private.i9xx_flush_page)
 		writel(1, intel_private.i9xx_flush_page);
 }
@@ -1405,13 +1407,16 @@ int intel_gmch_probe(struct pci_dev *bridge_pdev, struct pci_dev *gpu_pdev,
 
 	dev_info(&bridge_pdev->dev, "Intel %s Chipset\n", intel_gtt_chipsets[i].name);
 
-	mask = intel_private.driver->dma_mask_size;
-	if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(mask)))
-		dev_err(&intel_private.pcidev->dev,
-			"set gfx device dma mask %d-bit failed!\n", mask);
-	else
-		pci_set_consistent_dma_mask(intel_private.pcidev,
-					    DMA_BIT_MASK(mask));
+	if (bridge) {
+		mask = intel_private.driver->dma_mask_size;
+		if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(mask)))
+			dev_err(&intel_private.pcidev->dev,
+				"set gfx device dma mask %d-bit failed!\n",
+				mask);
+		else
+			pci_set_consistent_dma_mask(intel_private.pcidev,
+						    DMA_BIT_MASK(mask));
+	}
 
 	if (intel_gtt_init() != 0) {
 		intel_gmch_remove();
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 9bc46da8d77a..0c99735df694 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -474,6 +474,19 @@ config HW_RANDOM_KEYSTONE
 	help
 	  This option enables Keystone's hardware random generator.
 
+config HW_RANDOM_CCTRNG
+	tristate "Arm CryptoCell True Random Number Generator support"
+	depends on HAS_IOMEM
+	default HW_RANDOM
+	help
+	  This driver provides support for the True Random Number
+	  Generator available in Arm TrustZone CryptoCell.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cctrng.
+
+	  If unsure, say Y.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index a7801b49ce6c..2c6724735345 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -41,3 +41,4 @@ obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
 obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
 obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
 obj-$(CONFIG_HW_RANDOM_NPCM) += npcm-rng.o
+obj-$(CONFIG_HW_RANDOM_CCTRNG) += cctrng.o
diff --git a/drivers/char/hw_random/cctrng.c b/drivers/char/hw_random/cctrng.c
new file mode 100644
index 000000000000..e82716c12c3a
--- /dev/null
+++ b/drivers/char/hw_random/cctrng.c
@@ -0,0 +1,737 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2019-2020 ARM Limited or its affiliates. */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/workqueue.h>
+#include <linux/circ_buf.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/bitfield.h>
+#include <linux/fips.h>
+
+#include "cctrng.h"
+
+#define CC_REG_LOW(name)  (name ## _BIT_SHIFT)
+#define CC_REG_HIGH(name) (CC_REG_LOW(name) + name ## _BIT_SIZE - 1)
+#define CC_GENMASK(name)  GENMASK(CC_REG_HIGH(name), CC_REG_LOW(name))
+
+#define CC_REG_FLD_GET(reg_name, fld_name, reg_val)     \
+	(FIELD_GET(CC_GENMASK(CC_ ## reg_name ## _ ## fld_name), reg_val))
+
+#define CC_HW_RESET_LOOP_COUNT 10
+#define CC_TRNG_SUSPEND_TIMEOUT 3000
+
+/* data circular buffer in words must be:
+ *  - of a power-of-2 size (limitation of circ_buf.h macros)
+ *  - at least 6, the size generated in the EHR according to HW implementation
+ */
+#define CCTRNG_DATA_BUF_WORDS 32
+
+/* The timeout for the TRNG operation should be calculated with the formula:
+ * Timeout = EHR_NUM * VN_COEFF * EHR_LENGTH * SAMPLE_CNT * SCALE_VALUE
+ * while:
+ *  - SAMPLE_CNT is input value from the characterisation process
+ *  - all the rest are constants
+ */
+#define EHR_NUM 1
+#define VN_COEFF 4
+#define EHR_LENGTH CC_TRNG_EHR_IN_BITS
+#define SCALE_VALUE 2
+#define CCTRNG_TIMEOUT(smpl_cnt) \
+	(EHR_NUM * VN_COEFF * EHR_LENGTH * smpl_cnt * SCALE_VALUE)
+
+struct cctrng_drvdata {
+	struct platform_device *pdev;
+	void __iomem *cc_base;
+	struct clk *clk;
+	struct hwrng rng;
+	u32 active_rosc;
+	/* Sampling interval for each ring oscillator:
+	 * count of ring oscillator cycles between consecutive bits sampling.
+	 * Value of 0 indicates non-valid rosc
+	 */
+	u32 smpl_ratio[CC_TRNG_NUM_OF_ROSCS];
+
+	u32 data_buf[CCTRNG_DATA_BUF_WORDS];
+	struct circ_buf circ;
+	struct work_struct compwork;
+	struct work_struct startwork;
+
+	/* pending_hw - 1 when HW is pending, 0 when it is idle */
+	atomic_t pending_hw;
+
+	/* protects against multiple concurrent consumers of data_buf */
+	spinlock_t read_lock;
+};
+
+
+/* functions for write/read CC registers */
+static inline void cc_iowrite(struct cctrng_drvdata *drvdata, u32 reg, u32 val)
+{
+	iowrite32(val, (drvdata->cc_base + reg));
+}
+static inline u32 cc_ioread(struct cctrng_drvdata *drvdata, u32 reg)
+{
+	return ioread32(drvdata->cc_base + reg);
+}
+
+
+static int cc_trng_pm_get(struct device *dev)
+{
+	int rc = 0;
+
+	rc = pm_runtime_get_sync(dev);
+
+	/* pm_runtime_get_sync() can return 1 as a valid return code */
+	return (rc == 1 ? 0 : rc);
+}
+
+static void cc_trng_pm_put_suspend(struct device *dev)
+{
+	int rc = 0;
+
+	pm_runtime_mark_last_busy(dev);
+	rc = pm_runtime_put_autosuspend(dev);
+	if (rc)
+		dev_err(dev, "pm_runtime_put_autosuspend returned %x\n", rc);
+}
+
+static int cc_trng_pm_init(struct cctrng_drvdata *drvdata)
+{
+	struct device *dev = &(drvdata->pdev->dev);
+
+	/* must be before the enabling to avoid redundant suspending */
+	pm_runtime_set_autosuspend_delay(dev, CC_TRNG_SUSPEND_TIMEOUT);
+	pm_runtime_use_autosuspend(dev);
+	/* set us as active - note we won't do PM ops until cc_trng_pm_go()! */
+	return pm_runtime_set_active(dev);
+}
+
+static void cc_trng_pm_go(struct cctrng_drvdata *drvdata)
+{
+	struct device *dev = &(drvdata->pdev->dev);
+
+	/* enable the PM module*/
+	pm_runtime_enable(dev);
+}
+
+static void cc_trng_pm_fini(struct cctrng_drvdata *drvdata)
+{
+	struct device *dev = &(drvdata->pdev->dev);
+
+	pm_runtime_disable(dev);
+}
+
+
+static inline int cc_trng_parse_sampling_ratio(struct cctrng_drvdata *drvdata)
+{
+	struct device *dev = &(drvdata->pdev->dev);
+	struct device_node *np = drvdata->pdev->dev.of_node;
+	int rc;
+	int i;
+	/* ret will be set to 0 if at least one rosc has (sampling ratio > 0) */
+	int ret = -EINVAL;
+
+	rc = of_property_read_u32_array(np, "arm,rosc-ratio",
+					drvdata->smpl_ratio,
+					CC_TRNG_NUM_OF_ROSCS);
+	if (rc) {
+		/* arm,rosc-ratio was not found in device tree */
+		return rc;
+	}
+
+	/* verify that at least one rosc has (sampling ratio > 0) */
+	for (i = 0; i < CC_TRNG_NUM_OF_ROSCS; ++i) {
+		dev_dbg(dev, "rosc %d sampling ratio %u",
+			i, drvdata->smpl_ratio[i]);
+
+		if (drvdata->smpl_ratio[i] > 0)
+			ret = 0;
+	}
+
+	return ret;
+}
+
+static int cc_trng_change_rosc(struct cctrng_drvdata *drvdata)
+{
+	struct device *dev = &(drvdata->pdev->dev);
+
+	dev_dbg(dev, "cctrng change rosc (was %d)\n", drvdata->active_rosc);
+	drvdata->active_rosc += 1;
+
+	while (drvdata->active_rosc < CC_TRNG_NUM_OF_ROSCS) {
+		if (drvdata->smpl_ratio[drvdata->active_rosc] > 0)
+			return 0;
+
+		drvdata->active_rosc += 1;
+	}
+	return -EINVAL;
+}
+
+
+static void cc_trng_enable_rnd_source(struct cctrng_drvdata *drvdata)
+{
+	u32 max_cycles;
+
+	/* Set watchdog threshold to maximal allowed time (in CPU cycles) */
+	max_cycles = CCTRNG_TIMEOUT(drvdata->smpl_ratio[drvdata->active_rosc]);
+	cc_iowrite(drvdata, CC_RNG_WATCHDOG_VAL_REG_OFFSET, max_cycles);
+
+	/* enable the RND source */
+	cc_iowrite(drvdata, CC_RND_SOURCE_ENABLE_REG_OFFSET, 0x1);
+
+	/* unmask RNG interrupts */
+	cc_iowrite(drvdata, CC_RNG_IMR_REG_OFFSET, (u32)~CC_RNG_INT_MASK);
+}
+
+
+/* increase circular data buffer index (head/tail) */
+static inline void circ_idx_inc(int *idx, int bytes)
+{
+	*idx += (bytes + 3) >> 2;
+	*idx &= (CCTRNG_DATA_BUF_WORDS - 1);
+}
+
+static inline size_t circ_buf_space(struct cctrng_drvdata *drvdata)
+{
+	return CIRC_SPACE(drvdata->circ.head,
+			  drvdata->circ.tail, CCTRNG_DATA_BUF_WORDS);
+
+}
+
+static int cctrng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+	/* current implementation ignores "wait" */
+
+	struct cctrng_drvdata *drvdata = (struct cctrng_drvdata *)rng->priv;
+	struct device *dev = &(drvdata->pdev->dev);
+	u32 *buf = (u32 *)drvdata->circ.buf;
+	size_t copied = 0;
+	size_t cnt_w;
+	size_t size;
+	size_t left;
+
+	if (!spin_trylock(&drvdata->read_lock)) {
+		/* concurrent consumers from data_buf cannot be served */
+		dev_dbg_ratelimited(dev, "unable to hold lock\n");
+		return 0;
+	}
+
+	/* copy till end of data buffer (without wrap back) */
+	cnt_w = CIRC_CNT_TO_END(drvdata->circ.head,
+				drvdata->circ.tail, CCTRNG_DATA_BUF_WORDS);
+	size = min((cnt_w<<2), max);
+	memcpy(data, &(buf[drvdata->circ.tail]), size);
+	copied = size;
+	circ_idx_inc(&drvdata->circ.tail, size);
+	/* copy rest of data in data buffer */
+	left = max - copied;
+	if (left > 0) {
+		cnt_w = CIRC_CNT(drvdata->circ.head,
+				 drvdata->circ.tail, CCTRNG_DATA_BUF_WORDS);
+		size = min((cnt_w<<2), left);
+		memcpy(data, &(buf[drvdata->circ.tail]), size);
+		copied += size;
+		circ_idx_inc(&drvdata->circ.tail, size);
+	}
+
+	spin_unlock(&drvdata->read_lock);
+
+	if (circ_buf_space(drvdata) >= CC_TRNG_EHR_IN_WORDS) {
+		if (atomic_cmpxchg(&drvdata->pending_hw, 0, 1) == 0) {
+			/* re-check space in buffer to avoid potential race */
+			if (circ_buf_space(drvdata) >= CC_TRNG_EHR_IN_WORDS) {
+				/* increment device's usage counter */
+				int rc = cc_trng_pm_get(dev);
+
+				if (rc) {
+					dev_err(dev,
+						"cc_trng_pm_get returned %x\n",
+						rc);
+					return rc;
+				}
+
+				/* schedule execution of deferred work handler
+				 * for filling of data buffer
+				 */
+				schedule_work(&drvdata->startwork);
+			} else {
+				atomic_set(&drvdata->pending_hw, 0);
+			}
+		}
+	}
+
+	return copied;
+}
+
+static void cc_trng_hw_trigger(struct cctrng_drvdata *drvdata)
+{
+	u32 tmp_smpl_cnt = 0;
+	struct device *dev = &(drvdata->pdev->dev);
+
+	dev_dbg(dev, "cctrng hw trigger.\n");
+
+	/* enable the HW RND clock */
+	cc_iowrite(drvdata, CC_RNG_CLK_ENABLE_REG_OFFSET, 0x1);
+
+	/* do software reset */
+	cc_iowrite(drvdata, CC_RNG_SW_RESET_REG_OFFSET, 0x1);
+	/* in order to verify that the reset has completed,
+	 * the sample count need to be verified
+	 */
+	do {
+		/* enable the HW RND clock   */
+		cc_iowrite(drvdata, CC_RNG_CLK_ENABLE_REG_OFFSET, 0x1);
+
+		/* set sampling ratio (rng_clocks) between consecutive bits */
+		cc_iowrite(drvdata, CC_SAMPLE_CNT1_REG_OFFSET,
+			   drvdata->smpl_ratio[drvdata->active_rosc]);
+
+		/* read the sampling ratio  */
+		tmp_smpl_cnt = cc_ioread(drvdata, CC_SAMPLE_CNT1_REG_OFFSET);
+
+	} while (tmp_smpl_cnt != drvdata->smpl_ratio[drvdata->active_rosc]);
+
+	/* disable the RND source for setting new parameters in HW */
+	cc_iowrite(drvdata, CC_RND_SOURCE_ENABLE_REG_OFFSET, 0);
+
+	cc_iowrite(drvdata, CC_RNG_ICR_REG_OFFSET, 0xFFFFFFFF);
+
+	cc_iowrite(drvdata, CC_TRNG_CONFIG_REG_OFFSET, drvdata->active_rosc);
+
+	/* Debug Control register: set to 0 - no bypasses */
+	cc_iowrite(drvdata, CC_TRNG_DEBUG_CONTROL_REG_OFFSET, 0);
+
+	cc_trng_enable_rnd_source(drvdata);
+}
+
+void cc_trng_compwork_handler(struct work_struct *w)
+{
+	u32 isr = 0;
+	u32 ehr_valid = 0;
+	struct cctrng_drvdata *drvdata =
+			container_of(w, struct cctrng_drvdata, compwork);
+	struct device *dev = &(drvdata->pdev->dev);
+	int i;
+
+	/* stop DMA and the RNG source */
+	cc_iowrite(drvdata, CC_RNG_DMA_ENABLE_REG_OFFSET, 0);
+	cc_iowrite(drvdata, CC_RND_SOURCE_ENABLE_REG_OFFSET, 0);
+
+	/* read RNG_ISR and check for errors */
+	isr = cc_ioread(drvdata, CC_RNG_ISR_REG_OFFSET);
+	ehr_valid = CC_REG_FLD_GET(RNG_ISR, EHR_VALID, isr);
+	dev_dbg(dev, "Got RNG_ISR=0x%08X (EHR_VALID=%u)\n", isr, ehr_valid);
+
+#ifdef CONFIG_CRYPTO_FIPS
+	if (CC_REG_FLD_GET(RNG_ISR, CRNGT_ERR, isr) && fips_enabled) {
+		fips_fail_notify();
+		/* FIPS error is fatal */
+		panic("Got HW CRNGT error while fips is enabled!\n");
+	}
+#endif
+
+	/* Clear all pending RNG interrupts */
+	cc_iowrite(drvdata, CC_RNG_ICR_REG_OFFSET, isr);
+
+
+	if (!ehr_valid) {
+		/* in case of AUTOCORR/TIMEOUT error, try the next ROSC */
+		if (CC_REG_FLD_GET(RNG_ISR, AUTOCORR_ERR, isr) ||
+				CC_REG_FLD_GET(RNG_ISR, WATCHDOG, isr)) {
+			dev_dbg(dev, "cctrng autocorr/timeout error.\n");
+			goto next_rosc;
+		}
+
+		/* in case of VN error, ignore it */
+	}
+
+	/* read EHR data from registers */
+	for (i = 0; i < CC_TRNG_EHR_IN_WORDS; i++) {
+		/* calc word ptr in data_buf */
+		u32 *buf = (u32 *)drvdata->circ.buf;
+
+		buf[drvdata->circ.head] = cc_ioread(drvdata,
+				CC_EHR_DATA_0_REG_OFFSET + (i*sizeof(u32)));
+
+		/* EHR_DATA registers are cleared on read. In case 0 value was
+		 * returned, restart the entropy collection.
+		 */
+		if (buf[drvdata->circ.head] == 0) {
+			dev_dbg(dev, "Got 0 value in EHR. active_rosc %u\n",
+				drvdata->active_rosc);
+			goto next_rosc;
+		}
+
+		circ_idx_inc(&drvdata->circ.head, 1<<2);
+	}
+
+	atomic_set(&drvdata->pending_hw, 0);
+
+	/* continue to fill data buffer if needed */
+	if (circ_buf_space(drvdata) >= CC_TRNG_EHR_IN_WORDS) {
+		if (atomic_cmpxchg(&drvdata->pending_hw, 0, 1) == 0) {
+			/* Re-enable rnd source */
+			cc_trng_enable_rnd_source(drvdata);
+			return;
+		}
+	}
+
+	cc_trng_pm_put_suspend(dev);
+
+	dev_dbg(dev, "compwork handler done\n");
+	return;
+
+next_rosc:
+	if ((circ_buf_space(drvdata) >= CC_TRNG_EHR_IN_WORDS) &&
+			(cc_trng_change_rosc(drvdata) == 0)) {
+		/* trigger trng hw with next rosc */
+		cc_trng_hw_trigger(drvdata);
+	} else {
+		atomic_set(&drvdata->pending_hw, 0);
+		cc_trng_pm_put_suspend(dev);
+	}
+}
+
+static irqreturn_t cc_isr(int irq, void *dev_id)
+{
+	struct cctrng_drvdata *drvdata = (struct cctrng_drvdata *)dev_id;
+	struct device *dev = &(drvdata->pdev->dev);
+	u32 irr;
+
+	/* if driver suspended return, probably shared interrupt */
+	if (pm_runtime_suspended(dev))
+		return IRQ_NONE;
+
+	/* read the interrupt status */
+	irr = cc_ioread(drvdata, CC_HOST_RGF_IRR_REG_OFFSET);
+	dev_dbg(dev, "Got IRR=0x%08X\n", irr);
+
+	if (irr == 0) /* Probably shared interrupt line */
+		return IRQ_NONE;
+
+	/* clear interrupt - must be before processing events */
+	cc_iowrite(drvdata, CC_HOST_RGF_ICR_REG_OFFSET, irr);
+
+	/* RNG interrupt - most probable */
+	if (irr & CC_HOST_RNG_IRQ_MASK) {
+		/* Mask RNG interrupts - will be unmasked in deferred work */
+		cc_iowrite(drvdata, CC_RNG_IMR_REG_OFFSET, 0xFFFFFFFF);
+
+		/* We clear RNG interrupt here,
+		 * to avoid it from firing as we'll unmask RNG interrupts.
+		 */
+		cc_iowrite(drvdata, CC_HOST_RGF_ICR_REG_OFFSET,
+			   CC_HOST_RNG_IRQ_MASK);
+
+		irr &= ~CC_HOST_RNG_IRQ_MASK;
+
+		/* schedule execution of deferred work handler */
+		schedule_work(&drvdata->compwork);
+	}
+
+	if (irr) {
+		dev_dbg_ratelimited(dev,
+				"IRR includes unknown cause bits (0x%08X)\n",
+				irr);
+		/* Just warning */
+	}
+
+	return IRQ_HANDLED;
+}
+
+void cc_trng_startwork_handler(struct work_struct *w)
+{
+	struct cctrng_drvdata *drvdata =
+			container_of(w, struct cctrng_drvdata, startwork);
+
+	drvdata->active_rosc = 0;
+	cc_trng_hw_trigger(drvdata);
+}
+
+
+static int cc_trng_clk_init(struct cctrng_drvdata *drvdata)
+{
+	struct clk *clk;
+	struct device *dev = &(drvdata->pdev->dev);
+	int rc = 0;
+
+	clk = devm_clk_get_optional(dev, NULL);
+	if (IS_ERR(clk)) {
+		if (PTR_ERR(clk) != -EPROBE_DEFER)
+			dev_err(dev, "Error getting clock: %pe\n", clk);
+		return PTR_ERR(clk);
+	}
+	drvdata->clk = clk;
+
+	rc = clk_prepare_enable(drvdata->clk);
+	if (rc) {
+		dev_err(dev, "Failed to enable clock\n");
+		return rc;
+	}
+
+	return 0;
+}
+
+static void cc_trng_clk_fini(struct cctrng_drvdata *drvdata)
+{
+	clk_disable_unprepare(drvdata->clk);
+}
+
+
+static int cctrng_probe(struct platform_device *pdev)
+{
+	struct resource *req_mem_cc_regs = NULL;
+	struct cctrng_drvdata *drvdata;
+	struct device *dev = &pdev->dev;
+	int rc = 0;
+	u32 val;
+	int irq;
+
+	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	drvdata->rng.name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
+	if (!drvdata->rng.name)
+		return -ENOMEM;
+
+	drvdata->rng.read = cctrng_read;
+	drvdata->rng.priv = (unsigned long)drvdata;
+	drvdata->rng.quality = CC_TRNG_QUALITY;
+
+	platform_set_drvdata(pdev, drvdata);
+	drvdata->pdev = pdev;
+
+	drvdata->circ.buf = (char *)drvdata->data_buf;
+
+	/* Get device resources */
+	/* First CC registers space */
+	req_mem_cc_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	/* Map registers space */
+	drvdata->cc_base = devm_ioremap_resource(dev, req_mem_cc_regs);
+	if (IS_ERR(drvdata->cc_base)) {
+		dev_err(dev, "Failed to ioremap registers");
+		return PTR_ERR(drvdata->cc_base);
+	}
+
+	dev_dbg(dev, "Got MEM resource (%s): %pR\n", req_mem_cc_regs->name,
+		req_mem_cc_regs);
+	dev_dbg(dev, "CC registers mapped from %pa to 0x%p\n",
+		&req_mem_cc_regs->start, drvdata->cc_base);
+
+	/* Then IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "Failed getting IRQ resource\n");
+		return irq;
+	}
+
+	/* parse sampling rate from device tree */
+	rc = cc_trng_parse_sampling_ratio(drvdata);
+	if (rc) {
+		dev_err(dev, "Failed to get legal sampling ratio for rosc\n");
+		return rc;
+	}
+
+	rc = cc_trng_clk_init(drvdata);
+	if (rc) {
+		dev_err(dev, "cc_trng_clk_init failed\n");
+		return rc;
+	}
+
+	INIT_WORK(&drvdata->compwork, cc_trng_compwork_handler);
+	INIT_WORK(&drvdata->startwork, cc_trng_startwork_handler);
+	spin_lock_init(&drvdata->read_lock);
+
+	/* register the driver isr function */
+	rc = devm_request_irq(dev, irq, cc_isr, IRQF_SHARED, "cctrng", drvdata);
+	if (rc) {
+		dev_err(dev, "Could not register to interrupt %d\n", irq);
+		goto post_clk_err;
+	}
+	dev_dbg(dev, "Registered to IRQ: %d\n", irq);
+
+	/* Clear all pending interrupts */
+	val = cc_ioread(drvdata, CC_HOST_RGF_IRR_REG_OFFSET);
+	dev_dbg(dev, "IRR=0x%08X\n", val);
+	cc_iowrite(drvdata, CC_HOST_RGF_ICR_REG_OFFSET, val);
+
+	/* unmask HOST RNG interrupt */
+	cc_iowrite(drvdata, CC_HOST_RGF_IMR_REG_OFFSET,
+		   cc_ioread(drvdata, CC_HOST_RGF_IMR_REG_OFFSET) &
+		   ~CC_HOST_RNG_IRQ_MASK);
+
+	/* init PM */
+	rc = cc_trng_pm_init(drvdata);
+	if (rc) {
+		dev_err(dev, "cc_trng_pm_init failed\n");
+		goto post_clk_err;
+	}
+
+	/* increment device's usage counter */
+	rc = cc_trng_pm_get(dev);
+	if (rc) {
+		dev_err(dev, "cc_trng_pm_get returned %x\n", rc);
+		goto post_pm_err;
+	}
+
+	/* set pending_hw to verify that HW won't be triggered from read */
+	atomic_set(&drvdata->pending_hw, 1);
+
+	/* registration of the hwrng device */
+	rc = hwrng_register(&drvdata->rng);
+	if (rc) {
+		dev_err(dev, "Could not register hwrng device.\n");
+		goto post_pm_err;
+	}
+
+	/* trigger HW to start generate data */
+	drvdata->active_rosc = 0;
+	cc_trng_hw_trigger(drvdata);
+
+	/* All set, we can allow auto-suspend */
+	cc_trng_pm_go(drvdata);
+
+	dev_info(dev, "ARM cctrng device initialized\n");
+
+	return 0;
+
+post_pm_err:
+	cc_trng_pm_fini(drvdata);
+
+post_clk_err:
+	cc_trng_clk_fini(drvdata);
+
+	return rc;
+}
+
+static int cctrng_remove(struct platform_device *pdev)
+{
+	struct cctrng_drvdata *drvdata = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+
+	dev_dbg(dev, "Releasing cctrng resources...\n");
+
+	hwrng_unregister(&drvdata->rng);
+
+	cc_trng_pm_fini(drvdata);
+
+	cc_trng_clk_fini(drvdata);
+
+	dev_info(dev, "ARM cctrng device terminated\n");
+
+	return 0;
+}
+
+static int __maybe_unused cctrng_suspend(struct device *dev)
+{
+	struct cctrng_drvdata *drvdata = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "set HOST_POWER_DOWN_EN\n");
+	cc_iowrite(drvdata, CC_HOST_POWER_DOWN_EN_REG_OFFSET,
+			POWER_DOWN_ENABLE);
+
+	clk_disable_unprepare(drvdata->clk);
+
+	return 0;
+}
+
+static bool cctrng_wait_for_reset_completion(struct cctrng_drvdata *drvdata)
+{
+	unsigned int val;
+	unsigned int i;
+
+	for (i = 0; i < CC_HW_RESET_LOOP_COUNT; i++) {
+		/* in cc7x3 NVM_IS_IDLE indicates that CC reset is
+		 *  completed and device is fully functional
+		 */
+		val = cc_ioread(drvdata, CC_NVM_IS_IDLE_REG_OFFSET);
+		if (val & BIT(CC_NVM_IS_IDLE_VALUE_BIT_SHIFT)) {
+			/* hw indicate reset completed */
+			return true;
+		}
+		/* allow scheduling other process on the processor */
+		schedule();
+	}
+	/* reset not completed */
+	return false;
+}
+
+static int __maybe_unused cctrng_resume(struct device *dev)
+{
+	struct cctrng_drvdata *drvdata = dev_get_drvdata(dev);
+	int rc;
+
+	dev_dbg(dev, "unset HOST_POWER_DOWN_EN\n");
+	/* Enables the device source clk */
+	rc = clk_prepare_enable(drvdata->clk);
+	if (rc) {
+		dev_err(dev, "failed getting clock back on. We're toast.\n");
+		return rc;
+	}
+
+	/* wait for Cryptocell reset completion */
+	if (!cctrng_wait_for_reset_completion(drvdata)) {
+		dev_err(dev, "Cryptocell reset not completed");
+		return -EBUSY;
+	}
+
+	/* unmask HOST RNG interrupt */
+	cc_iowrite(drvdata, CC_HOST_RGF_IMR_REG_OFFSET,
+		   cc_ioread(drvdata, CC_HOST_RGF_IMR_REG_OFFSET) &
+		   ~CC_HOST_RNG_IRQ_MASK);
+
+	cc_iowrite(drvdata, CC_HOST_POWER_DOWN_EN_REG_OFFSET,
+		   POWER_DOWN_DISABLE);
+
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(cctrng_pm, cctrng_suspend, cctrng_resume, NULL);
+
+static const struct of_device_id arm_cctrng_dt_match[] = {
+	{ .compatible = "arm,cryptocell-713-trng", },
+	{ .compatible = "arm,cryptocell-703-trng", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, arm_cctrng_dt_match);
+
+static struct platform_driver cctrng_driver = {
+	.driver = {
+		.name = "cctrng",
+		.of_match_table = arm_cctrng_dt_match,
+		.pm = &cctrng_pm,
+	},
+	.probe = cctrng_probe,
+	.remove = cctrng_remove,
+};
+
+static int __init cctrng_mod_init(void)
+{
+	/* Compile time assertion checks */
+	BUILD_BUG_ON(CCTRNG_DATA_BUF_WORDS < 6);
+	BUILD_BUG_ON((CCTRNG_DATA_BUF_WORDS & (CCTRNG_DATA_BUF_WORDS-1)) != 0);
+
+	return platform_driver_register(&cctrng_driver);
+}
+module_init(cctrng_mod_init);
+
+static void __exit cctrng_mod_exit(void)
+{
+	platform_driver_unregister(&cctrng_driver);
+}
+module_exit(cctrng_mod_exit);
+
+/* Module description */
+MODULE_DESCRIPTION("ARM CryptoCell TRNG Driver");
+MODULE_AUTHOR("ARM");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/char/hw_random/cctrng.h b/drivers/char/hw_random/cctrng.h
new file mode 100644
index 000000000000..1f2fde95adcb
--- /dev/null
+++ b/drivers/char/hw_random/cctrng.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2019-2020 ARM Limited or its affiliates. */
+
+#include <linux/bitops.h>
+
+#define POWER_DOWN_ENABLE 0x01
+#define POWER_DOWN_DISABLE 0x00
+
+/* hwrng quality: bits of true entropy per 1024 bits of input */
+#define CC_TRNG_QUALITY	1024
+
+/* CryptoCell TRNG HW definitions */
+#define CC_TRNG_NUM_OF_ROSCS	4
+/* The number of words generated in the entropy holding register (EHR)
+ * 6 words (192 bit) according to HW implementation
+ */
+#define CC_TRNG_EHR_IN_WORDS	6
+#define CC_TRNG_EHR_IN_BITS	(CC_TRNG_EHR_IN_WORDS * BITS_PER_TYPE(u32))
+
+#define CC_HOST_RNG_IRQ_MASK BIT(CC_HOST_RGF_IRR_RNG_INT_BIT_SHIFT)
+
+/* RNG interrupt mask */
+#define CC_RNG_INT_MASK (BIT(CC_RNG_IMR_EHR_VALID_INT_MASK_BIT_SHIFT) | \
+			 BIT(CC_RNG_IMR_AUTOCORR_ERR_INT_MASK_BIT_SHIFT) | \
+			 BIT(CC_RNG_IMR_CRNGT_ERR_INT_MASK_BIT_SHIFT) | \
+			 BIT(CC_RNG_IMR_VN_ERR_INT_MASK_BIT_SHIFT) | \
+			 BIT(CC_RNG_IMR_WATCHDOG_INT_MASK_BIT_SHIFT))
+
+// --------------------------------------
+// BLOCK: RNG
+// --------------------------------------
+#define CC_RNG_IMR_REG_OFFSET	0x0100UL
+#define CC_RNG_IMR_EHR_VALID_INT_MASK_BIT_SHIFT	0x0UL
+#define CC_RNG_IMR_AUTOCORR_ERR_INT_MASK_BIT_SHIFT	0x1UL
+#define CC_RNG_IMR_CRNGT_ERR_INT_MASK_BIT_SHIFT	0x2UL
+#define CC_RNG_IMR_VN_ERR_INT_MASK_BIT_SHIFT	0x3UL
+#define CC_RNG_IMR_WATCHDOG_INT_MASK_BIT_SHIFT	0x4UL
+#define CC_RNG_ISR_REG_OFFSET	0x0104UL
+#define CC_RNG_ISR_EHR_VALID_BIT_SHIFT	0x0UL
+#define CC_RNG_ISR_EHR_VALID_BIT_SIZE	0x1UL
+#define CC_RNG_ISR_AUTOCORR_ERR_BIT_SHIFT	0x1UL
+#define CC_RNG_ISR_AUTOCORR_ERR_BIT_SIZE	0x1UL
+#define CC_RNG_ISR_CRNGT_ERR_BIT_SHIFT	0x2UL
+#define CC_RNG_ISR_CRNGT_ERR_BIT_SIZE	0x1UL
+#define CC_RNG_ISR_WATCHDOG_BIT_SHIFT	0x4UL
+#define CC_RNG_ISR_WATCHDOG_BIT_SIZE	0x1UL
+#define CC_RNG_ICR_REG_OFFSET	0x0108UL
+#define CC_TRNG_CONFIG_REG_OFFSET	0x010CUL
+#define CC_EHR_DATA_0_REG_OFFSET	0x0114UL
+#define CC_RND_SOURCE_ENABLE_REG_OFFSET	0x012CUL
+#define CC_SAMPLE_CNT1_REG_OFFSET	0x0130UL
+#define CC_TRNG_DEBUG_CONTROL_REG_OFFSET	0x0138UL
+#define CC_RNG_SW_RESET_REG_OFFSET	0x0140UL
+#define CC_RNG_CLK_ENABLE_REG_OFFSET	0x01C4UL
+#define CC_RNG_DMA_ENABLE_REG_OFFSET	0x01C8UL
+#define CC_RNG_WATCHDOG_VAL_REG_OFFSET	0x01D8UL
+// --------------------------------------
+// BLOCK: SEC_HOST_RGF
+// --------------------------------------
+#define CC_HOST_RGF_IRR_REG_OFFSET	0x0A00UL
+#define CC_HOST_RGF_IRR_RNG_INT_BIT_SHIFT	0xAUL
+#define CC_HOST_RGF_IMR_REG_OFFSET	0x0A04UL
+#define CC_HOST_RGF_ICR_REG_OFFSET	0x0A08UL
+
+#define CC_HOST_POWER_DOWN_EN_REG_OFFSET	0x0A78UL
+
+// --------------------------------------
+// BLOCK: NVM
+// --------------------------------------
+#define CC_NVM_IS_IDLE_REG_OFFSET	0x0F10UL
+#define CC_NVM_IS_IDLE_VALUE_BIT_SHIFT	0x0UL
+#define CC_NVM_IS_IDLE_VALUE_BIT_SIZE	0x1UL
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 65952393e1bb..7290c603fcb8 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -392,11 +392,8 @@ static int of_get_omap_rng_device_details(struct omap_rng_dev *priv,
 	if (of_device_is_compatible(dev->of_node, "ti,omap4-rng") ||
 	    of_device_is_compatible(dev->of_node, "inside-secure,safexcel-eip76")) {
 		irq = platform_get_irq(pdev, 0);
-		if (irq < 0) {
-			dev_err(dev, "%s: error getting IRQ resource - %d\n",
-				__func__, irq);
+		if (irq < 0)
 			return irq;
-		}
 
 		err = devm_request_irq(dev, irq, omap4_rng_irq,
 				       IRQF_TRIGGER_NONE, dev_name(dev), priv);
diff --git a/drivers/char/hw_random/xgene-rng.c b/drivers/char/hw_random/xgene-rng.c
index d7516a446987..008e6db9ce01 100644
--- a/drivers/char/hw_random/xgene-rng.c
+++ b/drivers/char/hw_random/xgene-rng.c
@@ -328,10 +328,8 @@ static int xgene_rng_probe(struct platform_device *pdev)
 		return PTR_ERR(ctx->csr_base);
 
 	rc = platform_get_irq(pdev, 0);
-	if (rc < 0) {
-		dev_err(&pdev->dev, "No IRQ resource\n");
+	if (rc < 0)
 		return rc;
-	}
 	ctx->irq = rc;
 
 	dev_dbg(&pdev->dev, "APM X-Gene RNG BASE %p ALARM IRQ %d",
diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c
index d36aeacb290e..cd0349bfffe9 100644
--- a/drivers/char/ipmi/bt-bmc.c
+++ b/drivers/char/ipmi/bt-bmc.c
@@ -430,9 +430,6 @@ static int bt_bmc_probe(struct platform_device *pdev)
 	struct device *dev;
 	int rc;
 
-	if (!pdev || !pdev->dev.of_node)
-		return -ENODEV;
-
 	dev = &pdev->dev;
 	dev_info(dev, "Found bt bmc device\n");
 
@@ -466,9 +463,9 @@ static int bt_bmc_probe(struct platform_device *pdev)
 	init_waitqueue_head(&bt_bmc->queue);
 
 	bt_bmc->miscdev.minor	= MISC_DYNAMIC_MINOR,
-		bt_bmc->miscdev.name	= DEVICE_NAME,
-		bt_bmc->miscdev.fops	= &bt_bmc_fops,
-		bt_bmc->miscdev.parent = dev;
+	bt_bmc->miscdev.name	= DEVICE_NAME,
+	bt_bmc->miscdev.fops	= &bt_bmc_fops,
+	bt_bmc->miscdev.parent = dev;
 	rc = misc_register(&bt_bmc->miscdev);
 	if (rc) {
 		dev_err(dev, "Unable to register misc device\n");
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index c48d8f086382..e1b22fe0916c 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -33,6 +33,7 @@
 #include <linux/workqueue.h>
 #include <linux/uuid.h>
 #include <linux/nospec.h>
+#include <linux/vmalloc.h>
 
 #define IPMI_DRIVER_VERSION "39.2"
 
@@ -1153,7 +1154,7 @@ static void free_user_work(struct work_struct *work)
 					      remove_work);
 
 	cleanup_srcu_struct(&user->release_barrier);
-	kfree(user);
+	vfree(user);
 }
 
 int ipmi_create_user(unsigned int          if_num,
@@ -1185,7 +1186,7 @@ int ipmi_create_user(unsigned int          if_num,
 	if (rv)
 		return rv;
 
-	new_user = kmalloc(sizeof(*new_user), GFP_KERNEL);
+	new_user = vzalloc(sizeof(*new_user));
 	if (!new_user)
 		return -ENOMEM;
 
@@ -1232,7 +1233,7 @@ int ipmi_create_user(unsigned int          if_num,
 
 out_kfree:
 	srcu_read_unlock(&ipmi_interfaces_srcu, index);
-	kfree(new_user);
+	vfree(new_user);
 	return rv;
 }
 EXPORT_SYMBOL(ipmi_create_user);
@@ -3171,7 +3172,7 @@ static void guid_handler(struct ipmi_smi *intf, struct ipmi_recv_msg *msg)
 		goto out;
 	}
 
-	guid_copy(&bmc->fetch_guid, (guid_t *)(msg->msg.data + 1));
+	import_guid(&bmc->fetch_guid, msg->msg.data + 1);
 	/*
 	 * Make sure the guid data is available before setting
 	 * dyn_guid_set.
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 0d10e31fd342..1e0db78b83ba 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -2057,7 +2057,7 @@ static char sysctl_bootid[16];
  * sysctl system call, as 16 bytes of binary data.
  */
 static int proc_do_uuid(struct ctl_table *table, int write,
-			void __user *buffer, size_t *lenp, loff_t *ppos)
+			void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table fake_table;
 	unsigned char buf[64], tmp_uuid[16], *uuid;
diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
index 6d81bb3bb503..896a3550fba9 100644
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@@ -777,17 +777,21 @@ static int __init tlclk_init(void)
 {
 	int ret;
 
+	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
+
+	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
+	if (!alarm_events) {
+		ret = -ENOMEM;
+		goto out1;
+	}
+
 	ret = register_chrdev(tlclk_major, "telco_clock", &tlclk_fops);
 	if (ret < 0) {
 		printk(KERN_ERR "tlclk: can't get major %d.\n", tlclk_major);
+		kfree(alarm_events);
 		return ret;
 	}
 	tlclk_major = ret;
-	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
-	if (!alarm_events) {
-		ret = -ENOMEM;
-		goto out1;
-	}
 
 	/* Read telecom clock IRQ number (Set by BIOS) */
 	if (!request_region(TLCLK_BASE, 8, "telco_clock")) {
@@ -796,7 +800,6 @@ static int __init tlclk_init(void)
 		ret = -EBUSY;
 		goto out2;
 	}
-	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
 
 	if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
 		printk(KERN_ERR "telclk_interrupt = 0x%x non-mcpbl0010 hw.\n",
@@ -837,8 +840,8 @@ static int __init tlclk_init(void)
 	release_region(TLCLK_BASE, 8);
 out2:
 	kfree(alarm_events);
-out1:
 	unregister_chrdev(tlclk_major, "telco_clock");
+out1:
 	return ret;
 }
 
diff --git a/drivers/char/tpm/tpm_ftpm_tee.c b/drivers/char/tpm/tpm_ftpm_tee.c
index 22bf553ccf9d..2491a2cb54a2 100644
--- a/drivers/char/tpm/tpm_ftpm_tee.c
+++ b/drivers/char/tpm/tpm_ftpm_tee.c
@@ -241,7 +241,7 @@ static int ftpm_tee_probe(struct platform_device *pdev)
 
 	/* Open a session with fTPM TA */
 	memset(&sess_arg, 0, sizeof(sess_arg));
-	memcpy(sess_arg.uuid, ftpm_ta_uuid.b, TEE_IOCTL_UUID_LEN);
+	export_uuid(sess_arg.uuid, &ftpm_ta_uuid);
 	sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
 	sess_arg.num_params = 0;
 
diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index 01eadee88d66..db0253fa3d64 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -10,25 +10,25 @@ config MXC_CLK_SCU
 
 config CLK_IMX8MM
 	bool "IMX8MM CCM Clock Driver"
-	depends on ARCH_MXC && ARM64
+	depends on ARCH_MXC
 	help
 	    Build the driver for i.MX8MM CCM Clock Driver
 
 config CLK_IMX8MN
 	bool "IMX8MN CCM Clock Driver"
-	depends on ARCH_MXC && ARM64
+	depends on ARCH_MXC
 	help
 	    Build the driver for i.MX8MN CCM Clock Driver
 
 config CLK_IMX8MP
 	bool "IMX8MP CCM Clock Driver"
-	depends on ARCH_MXC && ARM64
+	depends on ARCH_MXC
 	help
 	    Build the driver for i.MX8MP CCM Clock Driver
 
 config CLK_IMX8MQ
 	bool "IMX8MQ CCM Clock Driver"
-	depends on ARCH_MXC && ARM64
+	depends on ARCH_MXC
 	help
 	    Build the driver for i.MX8MQ CCM Clock Driver
 
diff --git a/drivers/clk/imx/clk-gate2.c b/drivers/clk/imx/clk-gate2.c
index ce0060e8873e..b87ab3c3ba1e 100644
--- a/drivers/clk/imx/clk-gate2.c
+++ b/drivers/clk/imx/clk-gate2.c
@@ -41,21 +41,26 @@ static int clk_gate2_enable(struct clk_hw *hw)
 	struct clk_gate2 *gate = to_clk_gate2(hw);
 	u32 reg;
 	unsigned long flags;
+	int ret = 0;
 
 	spin_lock_irqsave(gate->lock, flags);
 
 	if (gate->share_count && (*gate->share_count)++ > 0)
 		goto out;
 
-	reg = readl(gate->reg);
-	reg &= ~(3 << gate->bit_idx);
-	reg |= gate->cgr_val << gate->bit_idx;
-	writel(reg, gate->reg);
+	if (gate->flags & IMX_CLK_GATE2_SINGLE_BIT) {
+		ret = clk_gate_ops.enable(hw);
+	} else {
+		reg = readl(gate->reg);
+		reg &= ~(3 << gate->bit_idx);
+		reg |= gate->cgr_val << gate->bit_idx;
+		writel(reg, gate->reg);
+	}
 
 out:
 	spin_unlock_irqrestore(gate->lock, flags);
 
-	return 0;
+	return ret;
 }
 
 static void clk_gate2_disable(struct clk_hw *hw)
@@ -73,9 +78,13 @@ static void clk_gate2_disable(struct clk_hw *hw)
 			goto out;
 	}
 
-	reg = readl(gate->reg);
-	reg &= ~(3 << gate->bit_idx);
-	writel(reg, gate->reg);
+	if (gate->flags & IMX_CLK_GATE2_SINGLE_BIT) {
+		clk_gate_ops.disable(hw);
+	} else {
+		reg = readl(gate->reg);
+		reg &= ~(3 << gate->bit_idx);
+		writel(reg, gate->reg);
+	}
 
 out:
 	spin_unlock_irqrestore(gate->lock, flags);
@@ -95,6 +104,9 @@ static int clk_gate2_is_enabled(struct clk_hw *hw)
 {
 	struct clk_gate2 *gate = to_clk_gate2(hw);
 
+	if (gate->flags & IMX_CLK_GATE2_SINGLE_BIT)
+		return clk_gate_ops.is_enabled(hw);
+
 	return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
 }
 
@@ -104,6 +116,9 @@ static void clk_gate2_disable_unused(struct clk_hw *hw)
 	unsigned long flags;
 	u32 reg;
 
+	if (gate->flags & IMX_CLK_GATE2_SINGLE_BIT)
+		return;
+
 	spin_lock_irqsave(gate->lock, flags);
 
 	if (!gate->share_count || *gate->share_count == 0) {
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index dafc8806b03e..5dbb6a937732 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -503,7 +503,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 		clk_prepare_enable(hws[IMX6UL_CLK_USBPHY2_GATE]->clk);
 	}
 
-	clk_set_parent(hws[IMX6UL_CLK_CAN_SEL]->clk, hws[IMX6UL_CLK_PLL3_60M]->clk);
+	clk_set_parent(hws[IMX6UL_CLK_CAN_SEL]->clk, hws[IMX6UL_CLK_PLL3_80M]->clk);
 	if (clk_on_imx6ul())
 		clk_set_parent(hws[IMX6UL_CLK_SIM_PRE_SEL]->clk, hws[IMX6UL_CLK_PLL3_USB_OTG]->clk);
 	else if (clk_on_imx6ull())
diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
index 3710aa0dee9b..634c0b6636b0 100644
--- a/drivers/clk/imx/clk-imx7ulp.c
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -29,7 +29,7 @@ static const char * const ddr_sels[]		= { "apll_pfd_sel", "dummy", "dummy", "dum
 static const char * const nic_sels[]		= { "firc", "ddr_clk", };
 static const char * const periph_plat_sels[]	= { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
 static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk", "dummy", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
-static const char * const arm_sels[]		= { "divcore", "dummy", "dummy", "hsrun_divcore", };
+static const char * const arm_sels[]		= { "core", "dummy", "dummy", "hsrun_core", };
 
 /* used by sosc/sirc/firc/ddr/spll/apll dividers */
 static const struct clk_div_table ulp_div_table[] = {
@@ -121,7 +121,9 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
 	hws[IMX7ULP_CLK_DDR_SEL]	= imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 2, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
 
 	hws[IMX7ULP_CLK_CORE_DIV]	= imx_clk_hw_divider_flags("divcore",	"scs_sel",  base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
+	hws[IMX7ULP_CLK_CORE]		= imx_clk_hw_cpu("core", "divcore", hws[IMX7ULP_CLK_CORE_DIV]->clk, hws[IMX7ULP_CLK_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
 	hws[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
+	hws[IMX7ULP_CLK_HSRUN_CORE] = imx_clk_hw_cpu("hsrun_core", "hsrun_divcore", hws[IMX7ULP_CLK_HSRUN_CORE_DIV]->clk, hws[IMX7ULP_CLK_HSRUN_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
 
 	hws[IMX7ULP_CLK_DDR_DIV]	= imx_clk_hw_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
 							       0, ulp_div_table, &imx_ccm_lock);
@@ -270,7 +272,7 @@ static void __init imx7ulp_clk_smc1_init(struct device_node *np)
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 
-	hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_IS_CRITICAL);
+	hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_SET_RATE_PARENT);
 
 	imx_check_clk_hws(hws, clk_data->num);
 
diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index a83bbbee77d9..f9eb189b93c0 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -378,9 +378,9 @@ static const struct clk_ops clk_pll1443x_ops = {
 	.set_rate	= clk_pll1443x_set_rate,
 };
 
-struct clk_hw *imx_clk_hw_pll14xx(const char *name, const char *parent_name,
-				  void __iomem *base,
-				  const struct imx_pll14xx_clk *pll_clk)
+struct clk_hw *imx_dev_clk_hw_pll14xx(struct device *dev, const char *name,
+				const char *parent_name, void __iomem *base,
+				const struct imx_pll14xx_clk *pll_clk)
 {
 	struct clk_pll14xx *pll;
 	struct clk_hw *hw;
@@ -426,7 +426,7 @@ struct clk_hw *imx_clk_hw_pll14xx(const char *name, const char *parent_name,
 
 	hw = &pll->hw;
 
-	ret = clk_hw_register(NULL, hw);
+	ret = clk_hw_register(dev, hw);
 	if (ret) {
 		pr_err("%s: failed to register pll %s %d\n",
 			__func__, name, ret);
diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
index df91a8244fb4..a7db93030e02 100644
--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -7,6 +7,7 @@
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/err.h>
@@ -25,6 +26,8 @@
 #define IMX7_ENET_PLL_POWER	(0x1 << 5)
 #define IMX7_DDR_PLL_POWER	(0x1 << 20)
 
+#define PLL_LOCK_TIMEOUT	10000
+
 /**
  * struct clk_pllv3 - IMX PLL clock version 3
  * @clk_hw:	 clock source
@@ -53,23 +56,14 @@ struct clk_pllv3 {
 
 static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
 {
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
 	u32 val = readl_relaxed(pll->base) & pll->power_bit;
 
 	/* No need to wait for lock when pll is not powered up */
 	if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
 		return 0;
 
-	/* Wait for PLL to lock */
-	do {
-		if (readl_relaxed(pll->base) & BM_PLL_LOCK)
-			break;
-		if (time_after(jiffies, timeout))
-			break;
-		usleep_range(50, 500);
-	} while (1);
-
-	return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT;
+	return readl_relaxed_poll_timeout(pll->base, val, val & BM_PLL_LOCK,
+					  500, PLL_LOCK_TIMEOUT);
 }
 
 static int clk_pllv3_prepare(struct clk_hw *hw)
diff --git a/drivers/clk/imx/clk-sscg-pll.c b/drivers/clk/imx/clk-sscg-pll.c
index d4a2be16d132..773d8a545cdf 100644
--- a/drivers/clk/imx/clk-sscg-pll.c
+++ b/drivers/clk/imx/clk-sscg-pll.c
@@ -72,7 +72,6 @@ struct clk_sscg_pll_setup {
 	int divr2, divf2;
 	int divq;
 	int bypass;
-
 	uint64_t vco1;
 	uint64_t vco2;
 	uint64_t fout;
@@ -86,11 +85,8 @@ struct clk_sscg_pll_setup {
 struct clk_sscg_pll {
 	struct clk_hw	hw;
 	const struct clk_ops  ops;
-
 	void __iomem *base;
-
 	struct clk_sscg_pll_setup setup;
-
 	u8 parent;
 	u8 bypass1;
 	u8 bypass2;
@@ -194,7 +190,6 @@ static int clk_sscg_pll2_find_setup(struct clk_sscg_pll_setup *setup,
 					struct clk_sscg_pll_setup *temp_setup,
 					uint64_t ref)
 {
-
 	int ret;
 
 	if (ref < PLL_STAGE1_MIN_FREQ || ref > PLL_STAGE1_MAX_FREQ)
@@ -253,7 +248,6 @@ static int clk_sscg_pll1_find_setup(struct clk_sscg_pll_setup *setup,
 					struct clk_sscg_pll_setup *temp_setup,
 					uint64_t ref)
 {
-
 	int ret;
 
 	if (ref < PLL_REF_MIN_FREQ || ref > PLL_REF_MAX_FREQ)
@@ -280,7 +274,6 @@ static int clk_sscg_pll_find_setup(struct clk_sscg_pll_setup *setup,
 	temp_setup.fout_request = rate;
 
 	switch (try_bypass) {
-
 	case PLL_BYPASS2:
 		if (prate == rate) {
 			setup->bypass = PLL_BYPASS2;
@@ -288,11 +281,9 @@ static int clk_sscg_pll_find_setup(struct clk_sscg_pll_setup *setup,
 			ret = 0;
 		}
 		break;
-
 	case PLL_BYPASS1:
 		ret = clk_sscg_pll2_find_setup(setup, &temp_setup, prate);
 		break;
-
 	case PLL_BYPASS_NONE:
 		ret = clk_sscg_pll1_find_setup(setup, &temp_setup, prate);
 		break;
@@ -301,7 +292,6 @@ static int clk_sscg_pll_find_setup(struct clk_sscg_pll_setup *setup,
 	return ret;
 }
 
-
 static int clk_sscg_pll_is_prepared(struct clk_hw *hw)
 {
 	struct clk_sscg_pll *pll = to_clk_sscg_pll(hw);
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index f074dd8ec42e..b91b1b18a4a2 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -5,6 +5,8 @@
 #include <linux/spinlock.h>
 #include <linux/clk-provider.h>
 
+#define IMX_CLK_GATE2_SINGLE_BIT	1
+
 extern spinlock_t imx_ccm_lock;
 
 void imx_check_clocks(struct clk *clks[], unsigned int count);
@@ -131,9 +133,9 @@ struct clk *imx_clk_pll14xx(const char *name, const char *parent_name,
 #define imx_clk_pll14xx(name, parent_name, base, pll_clk) \
 	to_clk(imx_clk_hw_pll14xx(name, parent_name, base, pll_clk))
 
-struct clk_hw *imx_clk_hw_pll14xx(const char *name, const char *parent_name,
-				  void __iomem *base,
-				  const struct imx_pll14xx_clk *pll_clk);
+struct clk_hw *imx_dev_clk_hw_pll14xx(struct device *dev, const char *name,
+				const char *parent_name, void __iomem *base,
+				const struct imx_pll14xx_clk *pll_clk);
 
 struct clk_hw *imx_clk_hw_pllv1(enum imx_pllv1_type type, const char *name,
 		const char *parent, void __iomem *base);
@@ -240,6 +242,13 @@ static inline struct clk *to_clk(struct clk_hw *hw)
 	return hw->clk;
 }
 
+static inline struct clk_hw *imx_clk_hw_pll14xx(const char *name, const char *parent_name,
+				  void __iomem *base,
+				  const struct imx_pll14xx_clk *pll_clk)
+{
+	return imx_dev_clk_hw_pll14xx(NULL, name, parent_name, base, pll_clk);
+}
+
 static inline struct clk_hw *imx_clk_hw_fixed(const char *name, int rate)
 {
 	return clk_hw_register_fixed_rate(NULL, name, NULL, 0, rate);
@@ -310,6 +319,13 @@ static inline struct clk_hw *imx_clk_hw_gate(const char *name, const char *paren
 				    shift, 0, &imx_ccm_lock);
 }
 
+static inline struct clk_hw *imx_dev_clk_hw_gate(struct device *dev, const char *name,
+						const char *parent, void __iomem *reg, u8 shift)
+{
+	return clk_hw_register_gate(dev, name, parent, CLK_SET_RATE_PARENT, reg,
+				    shift, 0, &imx_ccm_lock);
+}
+
 static inline struct clk_hw *imx_clk_hw_gate_dis(const char *name, const char *parent,
 		void __iomem *reg, u8 shift)
 {
@@ -355,6 +371,17 @@ static inline struct clk_hw *imx_clk_hw_gate2_shared2(const char *name,
 				  &imx_ccm_lock, share_count);
 }
 
+static inline struct clk_hw *imx_dev_clk_hw_gate_shared(struct device *dev,
+				const char *name, const char *parent,
+				void __iomem *reg, u8 shift,
+				unsigned int *share_count)
+{
+	return clk_hw_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT |
+					CLK_OPS_PARENT_ENABLE, reg, shift, 0x3,
+					IMX_CLK_GATE2_SINGLE_BIT,
+					&imx_ccm_lock, share_count);
+}
+
 static inline struct clk *imx_clk_gate2_cgr(const char *name,
 		const char *parent, void __iomem *reg, u8 shift, u8 cgr_val)
 {
@@ -411,6 +438,15 @@ static inline struct clk_hw *imx_clk_hw_mux(const char *name, void __iomem *reg,
 			width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk_hw *imx_dev_clk_hw_mux(struct device *dev,
+			const char *name, void __iomem *reg, u8 shift,
+			u8 width, const char * const *parents, int num_parents)
+{
+	return clk_hw_register_mux(dev, name, parents, num_parents,
+			CLK_SET_RATE_NO_REPARENT | CLK_SET_PARENT_GATE,
+			reg, shift, width, 0, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_mux2(const char *name, void __iomem *reg,
 			u8 shift, u8 width, const char * const *parents,
 			int num_parents)
@@ -473,6 +509,19 @@ static inline struct clk_hw *imx_clk_hw_mux_flags(const char *name,
 				   reg, shift, width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk_hw *imx_dev_clk_hw_mux_flags(struct device *dev,
+						  const char *name,
+						  void __iomem *reg, u8 shift,
+						  u8 width,
+						  const char * const *parents,
+						  int num_parents,
+						  unsigned long flags)
+{
+	return clk_hw_register_mux(dev, name, parents, num_parents,
+				   flags | CLK_SET_RATE_NO_REPARENT,
+				   reg, shift, width, 0, &imx_ccm_lock);
+}
+
 struct clk_hw *imx_clk_hw_cpu(const char *name, const char *parent_name,
 		struct clk *div, struct clk *mux, struct clk *pll,
 		struct clk *step);
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index ea3c70d1307e..9e28db8125cd 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -274,6 +274,13 @@ config COMMON_CLK_MT8173
 	---help---
 	  This driver supports MediaTek MT8173 clocks.
 
+config COMMON_CLK_MT8173_MMSYS
+	bool "Clock driver for MediaTek MT8173 mmsys"
+	depends on COMMON_CLK_MT8173
+	default COMMON_CLK_MT8173
+	help
+	  This driver supports MediaTek MT8173 mmsys clocks.
+
 config COMMON_CLK_MT8183
 	bool "Clock driver for MediaTek MT8183"
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 8cdb76a5cd71..bb0536942075 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_COMMON_CLK_MT7629_ETHSYS) += clk-mt7629-eth.o
 obj-$(CONFIG_COMMON_CLK_MT7629_HIFSYS) += clk-mt7629-hif.o
 obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
 obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o
+obj-$(CONFIG_COMMON_CLK_MT8173_MMSYS) += clk-mt8173-mm.o
 obj-$(CONFIG_COMMON_CLK_MT8183) += clk-mt8183.o
 obj-$(CONFIG_COMMON_CLK_MT8183_AUDIOSYS) += clk-mt8183-audio.o
 obj-$(CONFIG_COMMON_CLK_MT8183_CAMSYS) += clk-mt8183-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8173-mm.c b/drivers/clk/mediatek/clk-mt8173-mm.c
new file mode 100644
index 000000000000..36fa20be77b6
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8173-mm.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-gate.h"
+#include "clk-mtk.h"
+
+#include <dt-bindings/clock/mt8173-clk.h>
+
+static const struct mtk_gate_regs mm0_cg_regs = {
+	.set_ofs = 0x0104,
+	.clr_ofs = 0x0108,
+	.sta_ofs = 0x0100,
+};
+
+static const struct mtk_gate_regs mm1_cg_regs = {
+	.set_ofs = 0x0114,
+	.clr_ofs = 0x0118,
+	.sta_ofs = 0x0110,
+};
+
+#define GATE_MM0(_id, _name, _parent, _shift) {			\
+		.id = _id,					\
+		.name = _name,					\
+		.parent_name = _parent,				\
+		.regs = &mm0_cg_regs,				\
+		.shift = _shift,				\
+		.ops = &mtk_clk_gate_ops_setclr,		\
+	}
+
+#define GATE_MM1(_id, _name, _parent, _shift) {			\
+		.id = _id,					\
+		.name = _name,					\
+		.parent_name = _parent,				\
+		.regs = &mm1_cg_regs,				\
+		.shift = _shift,				\
+		.ops = &mtk_clk_gate_ops_setclr,		\
+	}
+
+static const struct mtk_gate mt8173_mm_clks[] = {
+	/* MM0 */
+	GATE_MM0(CLK_MM_SMI_COMMON, "mm_smi_common", "mm_sel", 0),
+	GATE_MM0(CLK_MM_SMI_LARB0, "mm_smi_larb0", "mm_sel", 1),
+	GATE_MM0(CLK_MM_CAM_MDP, "mm_cam_mdp", "mm_sel", 2),
+	GATE_MM0(CLK_MM_MDP_RDMA0, "mm_mdp_rdma0", "mm_sel", 3),
+	GATE_MM0(CLK_MM_MDP_RDMA1, "mm_mdp_rdma1", "mm_sel", 4),
+	GATE_MM0(CLK_MM_MDP_RSZ0, "mm_mdp_rsz0", "mm_sel", 5),
+	GATE_MM0(CLK_MM_MDP_RSZ1, "mm_mdp_rsz1", "mm_sel", 6),
+	GATE_MM0(CLK_MM_MDP_RSZ2, "mm_mdp_rsz2", "mm_sel", 7),
+	GATE_MM0(CLK_MM_MDP_TDSHP0, "mm_mdp_tdshp0", "mm_sel", 8),
+	GATE_MM0(CLK_MM_MDP_TDSHP1, "mm_mdp_tdshp1", "mm_sel", 9),
+	GATE_MM0(CLK_MM_MDP_WDMA, "mm_mdp_wdma", "mm_sel", 11),
+	GATE_MM0(CLK_MM_MDP_WROT0, "mm_mdp_wrot0", "mm_sel", 12),
+	GATE_MM0(CLK_MM_MDP_WROT1, "mm_mdp_wrot1", "mm_sel", 13),
+	GATE_MM0(CLK_MM_FAKE_ENG, "mm_fake_eng", "mm_sel", 14),
+	GATE_MM0(CLK_MM_MUTEX_32K, "mm_mutex_32k", "rtc_sel", 15),
+	GATE_MM0(CLK_MM_DISP_OVL0, "mm_disp_ovl0", "mm_sel", 16),
+	GATE_MM0(CLK_MM_DISP_OVL1, "mm_disp_ovl1", "mm_sel", 17),
+	GATE_MM0(CLK_MM_DISP_RDMA0, "mm_disp_rdma0", "mm_sel", 18),
+	GATE_MM0(CLK_MM_DISP_RDMA1, "mm_disp_rdma1", "mm_sel", 19),
+	GATE_MM0(CLK_MM_DISP_RDMA2, "mm_disp_rdma2", "mm_sel", 20),
+	GATE_MM0(CLK_MM_DISP_WDMA0, "mm_disp_wdma0", "mm_sel", 21),
+	GATE_MM0(CLK_MM_DISP_WDMA1, "mm_disp_wdma1", "mm_sel", 22),
+	GATE_MM0(CLK_MM_DISP_COLOR0, "mm_disp_color0", "mm_sel", 23),
+	GATE_MM0(CLK_MM_DISP_COLOR1, "mm_disp_color1", "mm_sel", 24),
+	GATE_MM0(CLK_MM_DISP_AAL, "mm_disp_aal", "mm_sel", 25),
+	GATE_MM0(CLK_MM_DISP_GAMMA, "mm_disp_gamma", "mm_sel", 26),
+	GATE_MM0(CLK_MM_DISP_UFOE, "mm_disp_ufoe", "mm_sel", 27),
+	GATE_MM0(CLK_MM_DISP_SPLIT0, "mm_disp_split0", "mm_sel", 28),
+	GATE_MM0(CLK_MM_DISP_SPLIT1, "mm_disp_split1", "mm_sel", 29),
+	GATE_MM0(CLK_MM_DISP_MERGE, "mm_disp_merge", "mm_sel", 30),
+	GATE_MM0(CLK_MM_DISP_OD, "mm_disp_od", "mm_sel", 31),
+	/* MM1 */
+	GATE_MM1(CLK_MM_DISP_PWM0MM, "mm_disp_pwm0mm", "mm_sel", 0),
+	GATE_MM1(CLK_MM_DISP_PWM026M, "mm_disp_pwm026m", "pwm_sel", 1),
+	GATE_MM1(CLK_MM_DISP_PWM1MM, "mm_disp_pwm1mm", "mm_sel", 2),
+	GATE_MM1(CLK_MM_DISP_PWM126M, "mm_disp_pwm126m", "pwm_sel", 3),
+	GATE_MM1(CLK_MM_DSI0_ENGINE, "mm_dsi0_engine", "mm_sel", 4),
+	GATE_MM1(CLK_MM_DSI0_DIGITAL, "mm_dsi0_digital", "dsi0_dig", 5),
+	GATE_MM1(CLK_MM_DSI1_ENGINE, "mm_dsi1_engine", "mm_sel", 6),
+	GATE_MM1(CLK_MM_DSI1_DIGITAL, "mm_dsi1_digital", "dsi1_dig", 7),
+	GATE_MM1(CLK_MM_DPI_PIXEL, "mm_dpi_pixel", "dpi0_sel", 8),
+	GATE_MM1(CLK_MM_DPI_ENGINE, "mm_dpi_engine", "mm_sel", 9),
+	GATE_MM1(CLK_MM_DPI1_PIXEL, "mm_dpi1_pixel", "lvds_pxl", 10),
+	GATE_MM1(CLK_MM_DPI1_ENGINE, "mm_dpi1_engine", "mm_sel", 11),
+	GATE_MM1(CLK_MM_HDMI_PIXEL, "mm_hdmi_pixel", "dpi0_sel", 12),
+	GATE_MM1(CLK_MM_HDMI_PLLCK, "mm_hdmi_pllck", "hdmi_sel", 13),
+	GATE_MM1(CLK_MM_HDMI_AUDIO, "mm_hdmi_audio", "apll1", 14),
+	GATE_MM1(CLK_MM_HDMI_SPDIF, "mm_hdmi_spdif", "apll2", 15),
+	GATE_MM1(CLK_MM_LVDS_PIXEL, "mm_lvds_pixel", "lvds_pxl", 16),
+	GATE_MM1(CLK_MM_LVDS_CTS, "mm_lvds_cts", "lvds_cts", 17),
+	GATE_MM1(CLK_MM_SMI_LARB4, "mm_smi_larb4", "mm_sel", 18),
+	GATE_MM1(CLK_MM_HDMI_HDCP, "mm_hdmi_hdcp", "hdcp_sel", 19),
+	GATE_MM1(CLK_MM_HDMI_HDCP24M, "mm_hdmi_hdcp24m", "hdcp_24m_sel", 20),
+};
+
+struct clk_mt8173_mm_driver_data {
+	const struct mtk_gate *gates_clk;
+	int gates_num;
+};
+
+static const struct clk_mt8173_mm_driver_data mt8173_mmsys_driver_data = {
+	.gates_clk = mt8173_mm_clks,
+	.gates_num = ARRAY_SIZE(mt8173_mm_clks),
+};
+
+static int clk_mt8173_mm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->parent->of_node;
+	const struct clk_mt8173_mm_driver_data *data;
+	struct clk_onecell_data *clk_data;
+	int ret;
+
+	clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK);
+	if (!clk_data)
+		return -ENOMEM;
+
+	data = &mt8173_mmsys_driver_data;
+
+	ret = mtk_clk_register_gates(node, data->gates_clk, data->gates_num,
+				     clk_data);
+	if (ret)
+		return ret;
+
+	ret = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static struct platform_driver clk_mt8173_mm_drv = {
+	.driver = {
+		.name = "clk-mt8173-mm",
+	},
+	.probe = clk_mt8173_mm_probe,
+};
+
+builtin_platform_driver(clk_mt8173_mm_drv);
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 537a7f49b0f7..8f898ac476c0 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -753,93 +753,6 @@ static const struct mtk_gate img_clks[] __initconst = {
 	GATE_IMG(CLK_IMG_FD, "img_fd", "mm_sel", 11),
 };
 
-static const struct mtk_gate_regs mm0_cg_regs __initconst = {
-	.set_ofs = 0x0104,
-	.clr_ofs = 0x0108,
-	.sta_ofs = 0x0100,
-};
-
-static const struct mtk_gate_regs mm1_cg_regs __initconst = {
-	.set_ofs = 0x0114,
-	.clr_ofs = 0x0118,
-	.sta_ofs = 0x0110,
-};
-
-#define GATE_MM0(_id, _name, _parent, _shift) {			\
-		.id = _id,					\
-		.name = _name,					\
-		.parent_name = _parent,				\
-		.regs = &mm0_cg_regs,				\
-		.shift = _shift,				\
-		.ops = &mtk_clk_gate_ops_setclr,		\
-	}
-
-#define GATE_MM1(_id, _name, _parent, _shift) {			\
-		.id = _id,					\
-		.name = _name,					\
-		.parent_name = _parent,				\
-		.regs = &mm1_cg_regs,				\
-		.shift = _shift,				\
-		.ops = &mtk_clk_gate_ops_setclr,		\
-	}
-
-static const struct mtk_gate mm_clks[] __initconst = {
-	/* MM0 */
-	GATE_MM0(CLK_MM_SMI_COMMON, "mm_smi_common", "mm_sel", 0),
-	GATE_MM0(CLK_MM_SMI_LARB0, "mm_smi_larb0", "mm_sel", 1),
-	GATE_MM0(CLK_MM_CAM_MDP, "mm_cam_mdp", "mm_sel", 2),
-	GATE_MM0(CLK_MM_MDP_RDMA0, "mm_mdp_rdma0", "mm_sel", 3),
-	GATE_MM0(CLK_MM_MDP_RDMA1, "mm_mdp_rdma1", "mm_sel", 4),
-	GATE_MM0(CLK_MM_MDP_RSZ0, "mm_mdp_rsz0", "mm_sel", 5),
-	GATE_MM0(CLK_MM_MDP_RSZ1, "mm_mdp_rsz1", "mm_sel", 6),
-	GATE_MM0(CLK_MM_MDP_RSZ2, "mm_mdp_rsz2", "mm_sel", 7),
-	GATE_MM0(CLK_MM_MDP_TDSHP0, "mm_mdp_tdshp0", "mm_sel", 8),
-	GATE_MM0(CLK_MM_MDP_TDSHP1, "mm_mdp_tdshp1", "mm_sel", 9),
-	GATE_MM0(CLK_MM_MDP_WDMA, "mm_mdp_wdma", "mm_sel", 11),
-	GATE_MM0(CLK_MM_MDP_WROT0, "mm_mdp_wrot0", "mm_sel", 12),
-	GATE_MM0(CLK_MM_MDP_WROT1, "mm_mdp_wrot1", "mm_sel", 13),
-	GATE_MM0(CLK_MM_FAKE_ENG, "mm_fake_eng", "mm_sel", 14),
-	GATE_MM0(CLK_MM_MUTEX_32K, "mm_mutex_32k", "rtc_sel", 15),
-	GATE_MM0(CLK_MM_DISP_OVL0, "mm_disp_ovl0", "mm_sel", 16),
-	GATE_MM0(CLK_MM_DISP_OVL1, "mm_disp_ovl1", "mm_sel", 17),
-	GATE_MM0(CLK_MM_DISP_RDMA0, "mm_disp_rdma0", "mm_sel", 18),
-	GATE_MM0(CLK_MM_DISP_RDMA1, "mm_disp_rdma1", "mm_sel", 19),
-	GATE_MM0(CLK_MM_DISP_RDMA2, "mm_disp_rdma2", "mm_sel", 20),
-	GATE_MM0(CLK_MM_DISP_WDMA0, "mm_disp_wdma0", "mm_sel", 21),
-	GATE_MM0(CLK_MM_DISP_WDMA1, "mm_disp_wdma1", "mm_sel", 22),
-	GATE_MM0(CLK_MM_DISP_COLOR0, "mm_disp_color0", "mm_sel", 23),
-	GATE_MM0(CLK_MM_DISP_COLOR1, "mm_disp_color1", "mm_sel", 24),
-	GATE_MM0(CLK_MM_DISP_AAL, "mm_disp_aal", "mm_sel", 25),
-	GATE_MM0(CLK_MM_DISP_GAMMA, "mm_disp_gamma", "mm_sel", 26),
-	GATE_MM0(CLK_MM_DISP_UFOE, "mm_disp_ufoe", "mm_sel", 27),
-	GATE_MM0(CLK_MM_DISP_SPLIT0, "mm_disp_split0", "mm_sel", 28),
-	GATE_MM0(CLK_MM_DISP_SPLIT1, "mm_disp_split1", "mm_sel", 29),
-	GATE_MM0(CLK_MM_DISP_MERGE, "mm_disp_merge", "mm_sel", 30),
-	GATE_MM0(CLK_MM_DISP_OD, "mm_disp_od", "mm_sel", 31),
-	/* MM1 */
-	GATE_MM1(CLK_MM_DISP_PWM0MM, "mm_disp_pwm0mm", "mm_sel", 0),
-	GATE_MM1(CLK_MM_DISP_PWM026M, "mm_disp_pwm026m", "pwm_sel", 1),
-	GATE_MM1(CLK_MM_DISP_PWM1MM, "mm_disp_pwm1mm", "mm_sel", 2),
-	GATE_MM1(CLK_MM_DISP_PWM126M, "mm_disp_pwm126m", "pwm_sel", 3),
-	GATE_MM1(CLK_MM_DSI0_ENGINE, "mm_dsi0_engine", "mm_sel", 4),
-	GATE_MM1(CLK_MM_DSI0_DIGITAL, "mm_dsi0_digital", "dsi0_dig", 5),
-	GATE_MM1(CLK_MM_DSI1_ENGINE, "mm_dsi1_engine", "mm_sel", 6),
-	GATE_MM1(CLK_MM_DSI1_DIGITAL, "mm_dsi1_digital", "dsi1_dig", 7),
-	GATE_MM1(CLK_MM_DPI_PIXEL, "mm_dpi_pixel", "dpi0_sel", 8),
-	GATE_MM1(CLK_MM_DPI_ENGINE, "mm_dpi_engine", "mm_sel", 9),
-	GATE_MM1(CLK_MM_DPI1_PIXEL, "mm_dpi1_pixel", "lvds_pxl", 10),
-	GATE_MM1(CLK_MM_DPI1_ENGINE, "mm_dpi1_engine", "mm_sel", 11),
-	GATE_MM1(CLK_MM_HDMI_PIXEL, "mm_hdmi_pixel", "dpi0_sel", 12),
-	GATE_MM1(CLK_MM_HDMI_PLLCK, "mm_hdmi_pllck", "hdmi_sel", 13),
-	GATE_MM1(CLK_MM_HDMI_AUDIO, "mm_hdmi_audio", "apll1", 14),
-	GATE_MM1(CLK_MM_HDMI_SPDIF, "mm_hdmi_spdif", "apll2", 15),
-	GATE_MM1(CLK_MM_LVDS_PIXEL, "mm_lvds_pixel", "lvds_pxl", 16),
-	GATE_MM1(CLK_MM_LVDS_CTS, "mm_lvds_cts", "lvds_cts", 17),
-	GATE_MM1(CLK_MM_SMI_LARB4, "mm_smi_larb4", "mm_sel", 18),
-	GATE_MM1(CLK_MM_HDMI_HDCP, "mm_hdmi_hdcp", "hdcp_sel", 19),
-	GATE_MM1(CLK_MM_HDMI_HDCP24M, "mm_hdmi_hdcp24m", "hdcp_24m_sel", 20),
-};
-
 static const struct mtk_gate_regs vdec0_cg_regs __initconst = {
 	.set_ofs = 0x0000,
 	.clr_ofs = 0x0004,
@@ -1144,23 +1057,6 @@ static void __init mtk_imgsys_init(struct device_node *node)
 }
 CLK_OF_DECLARE(mtk_imgsys, "mediatek,mt8173-imgsys", mtk_imgsys_init);
 
-static void __init mtk_mmsys_init(struct device_node *node)
-{
-	struct clk_onecell_data *clk_data;
-	int r;
-
-	clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK);
-
-	mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
-						clk_data);
-
-	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-	if (r)
-		pr_err("%s(): could not register clock provider: %d\n",
-			__func__, r);
-}
-CLK_OF_DECLARE(mtk_mmsys, "mediatek,mt8173-mmsys", mtk_mmsys_init);
-
 static void __init mtk_vdecsys_init(struct device_node *node)
 {
 	struct clk_onecell_data *clk_data;
diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
index 10560d963baf..4c6c9167ef50 100644
--- a/drivers/clk/rockchip/clk-pll.c
+++ b/drivers/clk/rockchip/clk-pll.c
@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/clk-provider.h>
+#include <linux/iopoll.h>
 #include <linux/regmap.h>
 #include <linux/clk.h>
 #include "clk.h"
@@ -86,23 +87,14 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
 {
 	struct regmap *grf = pll->ctx->grf;
 	unsigned int val;
-	int delay = 24000000, ret;
-
-	while (delay > 0) {
-		ret = regmap_read(grf, pll->lock_offset, &val);
-		if (ret) {
-			pr_err("%s: failed to read pll lock status: %d\n",
-			       __func__, ret);
-			return ret;
-		}
+	int ret;
 
-		if (val & BIT(pll->lock_shift))
-			return 0;
-		delay--;
-	}
+	ret = regmap_read_poll_timeout(grf, pll->lock_offset, val,
+				       val & BIT(pll->lock_shift), 0, 1000);
+	if (ret)
+		pr_err("%s: timeout waiting for pll to lock\n", __func__);
 
-	pr_err("%s: timeout waiting for pll to lock\n", __func__);
-	return -ETIMEDOUT;
+	return ret;
 }
 
 /**
@@ -118,12 +110,31 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
 #define RK3036_PLLCON1_REFDIV_SHIFT		0
 #define RK3036_PLLCON1_POSTDIV2_MASK		0x7
 #define RK3036_PLLCON1_POSTDIV2_SHIFT		6
+#define RK3036_PLLCON1_LOCK_STATUS		BIT(10)
 #define RK3036_PLLCON1_DSMPD_MASK		0x1
 #define RK3036_PLLCON1_DSMPD_SHIFT		12
+#define RK3036_PLLCON1_PWRDOWN			BIT(13)
 #define RK3036_PLLCON2_FRAC_MASK		0xffffff
 #define RK3036_PLLCON2_FRAC_SHIFT		0
 
-#define RK3036_PLLCON1_PWRDOWN			(1 << 13)
+static int rockchip_rk3036_pll_wait_lock(struct rockchip_clk_pll *pll)
+{
+	u32 pllcon;
+	int ret;
+
+	/*
+	 * Lock time typical 250, max 500 input clock cycles @24MHz
+	 * So define a very safe maximum of 1000us, meaning 24000 cycles.
+	 */
+	ret = readl_relaxed_poll_timeout(pll->reg_base + RK3036_PLLCON(1),
+					 pllcon,
+					 pllcon & RK3036_PLLCON1_LOCK_STATUS,
+					 0, 1000);
+	if (ret)
+		pr_err("%s: timeout waiting for pll to lock\n", __func__);
+
+	return ret;
+}
 
 static void rockchip_rk3036_pll_get_params(struct rockchip_clk_pll *pll,
 					struct rockchip_pll_rate_table *rate)
@@ -221,7 +232,7 @@ static int rockchip_rk3036_pll_set_params(struct rockchip_clk_pll *pll,
 	writel_relaxed(pllcon, pll->reg_base + RK3036_PLLCON(2));
 
 	/* wait for the pll to lock */
-	ret = rockchip_pll_wait_lock(pll);
+	ret = rockchip_rk3036_pll_wait_lock(pll);
 	if (ret) {
 		pr_warn("%s: pll update unsuccessful, trying to restore old params\n",
 			__func__);
@@ -260,7 +271,7 @@ static int rockchip_rk3036_pll_enable(struct clk_hw *hw)
 
 	writel(HIWORD_UPDATE(0, RK3036_PLLCON1_PWRDOWN, 0),
 	       pll->reg_base + RK3036_PLLCON(1));
-	rockchip_pll_wait_lock(pll);
+	rockchip_rk3036_pll_wait_lock(pll);
 
 	return 0;
 }
@@ -589,19 +600,20 @@ static const struct clk_ops rockchip_rk3066_pll_clk_ops = {
 static int rockchip_rk3399_pll_wait_lock(struct rockchip_clk_pll *pll)
 {
 	u32 pllcon;
-	int delay = 24000000;
-
-	/* poll check the lock status in rk3399 xPLLCON2 */
-	while (delay > 0) {
-		pllcon = readl_relaxed(pll->reg_base + RK3399_PLLCON(2));
-		if (pllcon & RK3399_PLLCON2_LOCK_STATUS)
-			return 0;
+	int ret;
 
-		delay--;
-	}
+	/*
+	 * Lock time typical 250, max 500 input clock cycles @24MHz
+	 * So define a very safe maximum of 1000us, meaning 24000 cycles.
+	 */
+	ret = readl_relaxed_poll_timeout(pll->reg_base + RK3399_PLLCON(2),
+					 pllcon,
+					 pllcon & RK3399_PLLCON2_LOCK_STATUS,
+					 0, 1000);
+	if (ret)
+		pr_err("%s: timeout waiting for pll to lock\n", __func__);
 
-	pr_err("%s: timeout waiting for pll to lock\n", __func__);
-	return -ETIMEDOUT;
+	return ret;
 }
 
 static void rockchip_rk3399_pll_get_params(struct rockchip_clk_pll *pll,
diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index d17cfb7a3ff4..d7243c09cc84 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -156,8 +156,6 @@ PNAME(mux_i2s_out_p)		= { "i2s1_pre", "xin12m" };
 PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "xin12m" };
 PNAME(mux_sclk_spdif_p)		= { "sclk_spdif_src", "spdif_frac", "xin12m" };
 
-PNAME(mux_aclk_gpu_pre_p)	= { "cpll_gpu", "gpll_gpu", "hdmiphy_gpu", "usb480m_gpu" };
-
 PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
@@ -468,16 +466,9 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(24), 6, 10, DFLAGS,
 			RK2928_CLKGATE_CON(2), 8, GFLAGS),
 
-	GATE(0, "cpll_gpu", "cpll", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "gpll_gpu", "gpll", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "hdmiphy_gpu", "hdmiphy", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "usb480m_gpu", "usb480m", 0,
+	COMPOSITE(0, "aclk_gpu_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS,
 			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	COMPOSITE_NOGATE(0, "aclk_gpu_pre", mux_aclk_gpu_pre_p, 0,
-			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS),
 
 	COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_2plls_p, 0,
 			RK2928_CLKSEL_CON(25), 8, 1, MFLAGS, 0, 7, DFLAGS,
@@ -582,8 +573,8 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 	GATE(0, "pclk_peri_noc", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 2, GFLAGS),
 
 	/* PD_GPU */
-	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS),
-	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS),
+	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 14, GFLAGS),
+	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
 
 	/* PD_BUS */
 	GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 27201fd26e44..e1aa1fbac48a 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -90,7 +90,7 @@ static void sun6i_a31_get_pll1_factors(struct factors_request *req)
 	 * Round down the frequency to the closest multiple of either
 	 * 6 or 16
 	 */
-	u32 round_freq_6 = round_down(freq_mhz, 6);
+	u32 round_freq_6 = rounddown(freq_mhz, 6);
 	u32 round_freq_16 = round_down(freq_mhz, 16);
 
 	if (round_freq_6 > round_freq_16)
diff --git a/drivers/clk/tegra/Kconfig b/drivers/clk/tegra/Kconfig
index 4d99a8770485..deaa4605824c 100644
--- a/drivers/clk/tegra/Kconfig
+++ b/drivers/clk/tegra/Kconfig
@@ -1,8 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-config TEGRA_CLK_EMC
-	def_bool y
-	depends on TEGRA124_EMC
-
 config CLK_TEGRA_BPMP
 	def_bool y
 	depends on TEGRA_BPMP
diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index 1f7c30f87ece..6e1200b3bb68 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -14,7 +14,6 @@ obj-y					+= clk-tegra-audio.o
 obj-y					+= clk-tegra-periph.o
 obj-y					+= clk-tegra-fixed.o
 obj-y					+= clk-tegra-super-gen4.o
-obj-$(CONFIG_TEGRA_CLK_EMC)		+= clk-emc.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += clk-tegra20.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= clk-tegra20-emc.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)         += clk-tegra30.o
@@ -22,8 +21,10 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= clk-tegra20-emc.o
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= clk-tegra114.o
 obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= clk-tegra124.o
 obj-$(CONFIG_TEGRA_CLK_DFLL)		+= clk-tegra124-dfll-fcpu.o
+obj-$(CONFIG_TEGRA124_EMC)		+= clk-tegra124-emc.o
 obj-$(CONFIG_ARCH_TEGRA_132_SOC)	+= clk-tegra124.o
 obj-y					+= cvb.o
 obj-$(CONFIG_ARCH_TEGRA_210_SOC)	+= clk-tegra210.o
+obj-$(CONFIG_ARCH_TEGRA_210_SOC)	+= clk-tegra210-emc.o
 obj-$(CONFIG_CLK_TEGRA_BPMP)		+= clk-bpmp.o
 obj-y					+= clk-utils.o
diff --git a/drivers/clk/tegra/clk-emc.c b/drivers/clk/tegra/clk-emc.c
deleted file mode 100644
index 745f9faa98d8..000000000000
--- a/drivers/clk/tegra/clk-emc.c
+++ /dev/null
@@ -1,540 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * drivers/clk/tegra/clk-emc.c
- *
- * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
- *
- * Author:
- *	Mikko Perttunen <mperttunen@nvidia.com>
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/sort.h>
-#include <linux/string.h>
-
-#include <soc/tegra/fuse.h>
-#include <soc/tegra/emc.h>
-
-#include "clk.h"
-
-#define CLK_SOURCE_EMC 0x19c
-
-#define CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_SHIFT 0
-#define CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK 0xff
-#define CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR(x) (((x) & CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK) << \
-					      CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_SHIFT)
-
-#define CLK_SOURCE_EMC_EMC_2X_CLK_SRC_SHIFT 29
-#define CLK_SOURCE_EMC_EMC_2X_CLK_SRC_MASK 0x7
-#define CLK_SOURCE_EMC_EMC_2X_CLK_SRC(x) (((x) & CLK_SOURCE_EMC_EMC_2X_CLK_SRC_MASK) << \
-					  CLK_SOURCE_EMC_EMC_2X_CLK_SRC_SHIFT)
-
-static const char * const emc_parent_clk_names[] = {
-	"pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud",
-	"pll_c2", "pll_c3", "pll_c_ud"
-};
-
-/*
- * List of clock sources for various parents the EMC clock can have.
- * When we change the timing to a timing with a parent that has the same
- * clock source as the current parent, we must first change to a backup
- * timing that has a different clock source.
- */
-
-#define EMC_SRC_PLL_M 0
-#define EMC_SRC_PLL_C 1
-#define EMC_SRC_PLL_P 2
-#define EMC_SRC_CLK_M 3
-#define EMC_SRC_PLL_C2 4
-#define EMC_SRC_PLL_C3 5
-
-static const char emc_parent_clk_sources[] = {
-	EMC_SRC_PLL_M, EMC_SRC_PLL_C, EMC_SRC_PLL_P, EMC_SRC_CLK_M,
-	EMC_SRC_PLL_M, EMC_SRC_PLL_C2, EMC_SRC_PLL_C3, EMC_SRC_PLL_C
-};
-
-struct emc_timing {
-	unsigned long rate, parent_rate;
-	u8 parent_index;
-	struct clk *parent;
-	u32 ram_code;
-};
-
-struct tegra_clk_emc {
-	struct clk_hw hw;
-	void __iomem *clk_regs;
-	struct clk *prev_parent;
-	bool changing_timing;
-
-	struct device_node *emc_node;
-	struct tegra_emc *emc;
-
-	int num_timings;
-	struct emc_timing *timings;
-	spinlock_t *lock;
-};
-
-/* Common clock framework callback implementations */
-
-static unsigned long emc_recalc_rate(struct clk_hw *hw,
-				     unsigned long parent_rate)
-{
-	struct tegra_clk_emc *tegra;
-	u32 val, div;
-
-	tegra = container_of(hw, struct tegra_clk_emc, hw);
-
-	/*
-	 * CCF wrongly assumes that the parent won't change during set_rate,
-	 * so get the parent rate explicitly.
-	 */
-	parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
-
-	val = readl(tegra->clk_regs + CLK_SOURCE_EMC);
-	div = val & CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK;
-
-	return parent_rate / (div + 2) * 2;
-}
-
-/*
- * Rounds up unless no higher rate exists, in which case down. This way is
- * safer since things have EMC rate floors. Also don't touch parent_rate
- * since we don't want the CCF to play with our parent clocks.
- */
-static int emc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
-{
-	struct tegra_clk_emc *tegra;
-	u8 ram_code = tegra_read_ram_code();
-	struct emc_timing *timing = NULL;
-	int i, k, t;
-
-	tegra = container_of(hw, struct tegra_clk_emc, hw);
-
-	for (k = 0; k < tegra->num_timings; k++) {
-		if (tegra->timings[k].ram_code == ram_code)
-			break;
-	}
-
-	for (t = k; t < tegra->num_timings; t++) {
-		if (tegra->timings[t].ram_code != ram_code)
-			break;
-	}
-
-	for (i = k; i < t; i++) {
-		timing = tegra->timings + i;
-
-		if (timing->rate < req->rate && i != t - 1)
-			continue;
-
-		if (timing->rate > req->max_rate) {
-			i = max(i, k + 1);
-			req->rate = tegra->timings[i - 1].rate;
-			return 0;
-		}
-
-		if (timing->rate < req->min_rate)
-			continue;
-
-		req->rate = timing->rate;
-		return 0;
-	}
-
-	if (timing) {
-		req->rate = timing->rate;
-		return 0;
-	}
-
-	req->rate = clk_hw_get_rate(hw);
-	return 0;
-}
-
-static u8 emc_get_parent(struct clk_hw *hw)
-{
-	struct tegra_clk_emc *tegra;
-	u32 val;
-
-	tegra = container_of(hw, struct tegra_clk_emc, hw);
-
-	val = readl(tegra->clk_regs + CLK_SOURCE_EMC);
-
-	return (val >> CLK_SOURCE_EMC_EMC_2X_CLK_SRC_SHIFT)
-		& CLK_SOURCE_EMC_EMC_2X_CLK_SRC_MASK;
-}
-
-static struct tegra_emc *emc_ensure_emc_driver(struct tegra_clk_emc *tegra)
-{
-	struct platform_device *pdev;
-
-	if (tegra->emc)
-		return tegra->emc;
-
-	if (!tegra->emc_node)
-		return NULL;
-
-	pdev = of_find_device_by_node(tegra->emc_node);
-	if (!pdev) {
-		pr_err("%s: could not get external memory controller\n",
-		       __func__);
-		return NULL;
-	}
-
-	of_node_put(tegra->emc_node);
-	tegra->emc_node = NULL;
-
-	tegra->emc = platform_get_drvdata(pdev);
-	if (!tegra->emc) {
-		pr_err("%s: cannot find EMC driver\n", __func__);
-		return NULL;
-	}
-
-	return tegra->emc;
-}
-
-static int emc_set_timing(struct tegra_clk_emc *tegra,
-			  struct emc_timing *timing)
-{
-	int err;
-	u8 div;
-	u32 car_value;
-	unsigned long flags = 0;
-	struct tegra_emc *emc = emc_ensure_emc_driver(tegra);
-
-	if (!emc)
-		return -ENOENT;
-
-	pr_debug("going to rate %ld prate %ld p %s\n", timing->rate,
-		 timing->parent_rate, __clk_get_name(timing->parent));
-
-	if (emc_get_parent(&tegra->hw) == timing->parent_index &&
-	    clk_get_rate(timing->parent) != timing->parent_rate) {
-		WARN_ONCE(1, "parent %s rate mismatch %lu %lu\n",
-			  __clk_get_name(timing->parent),
-			  clk_get_rate(timing->parent),
-			  timing->parent_rate);
-		return -EINVAL;
-	}
-
-	tegra->changing_timing = true;
-
-	err = clk_set_rate(timing->parent, timing->parent_rate);
-	if (err) {
-		pr_err("cannot change parent %s rate to %ld: %d\n",
-		       __clk_get_name(timing->parent), timing->parent_rate,
-		       err);
-
-		return err;
-	}
-
-	err = clk_prepare_enable(timing->parent);
-	if (err) {
-		pr_err("cannot enable parent clock: %d\n", err);
-		return err;
-	}
-
-	div = timing->parent_rate / (timing->rate / 2) - 2;
-
-	err = tegra_emc_prepare_timing_change(emc, timing->rate);
-	if (err)
-		return err;
-
-	spin_lock_irqsave(tegra->lock, flags);
-
-	car_value = readl(tegra->clk_regs + CLK_SOURCE_EMC);
-
-	car_value &= ~CLK_SOURCE_EMC_EMC_2X_CLK_SRC(~0);
-	car_value |= CLK_SOURCE_EMC_EMC_2X_CLK_SRC(timing->parent_index);
-
-	car_value &= ~CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR(~0);
-	car_value |= CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR(div);
-
-	writel(car_value, tegra->clk_regs + CLK_SOURCE_EMC);
-
-	spin_unlock_irqrestore(tegra->lock, flags);
-
-	tegra_emc_complete_timing_change(emc, timing->rate);
-
-	clk_hw_reparent(&tegra->hw, __clk_get_hw(timing->parent));
-	clk_disable_unprepare(tegra->prev_parent);
-
-	tegra->prev_parent = timing->parent;
-	tegra->changing_timing = false;
-
-	return 0;
-}
-
-/*
- * Get backup timing to use as an intermediate step when a change between
- * two timings with the same clock source has been requested. First try to
- * find a timing with a higher clock rate to avoid a rate below any set rate
- * floors. If that is not possible, find a lower rate.
- */
-static struct emc_timing *get_backup_timing(struct tegra_clk_emc *tegra,
-					    int timing_index)
-{
-	int i;
-	u32 ram_code = tegra_read_ram_code();
-	struct emc_timing *timing;
-
-	for (i = timing_index+1; i < tegra->num_timings; i++) {
-		timing = tegra->timings + i;
-		if (timing->ram_code != ram_code)
-			break;
-
-		if (emc_parent_clk_sources[timing->parent_index] !=
-		    emc_parent_clk_sources[
-		      tegra->timings[timing_index].parent_index])
-			return timing;
-	}
-
-	for (i = timing_index-1; i >= 0; --i) {
-		timing = tegra->timings + i;
-		if (timing->ram_code != ram_code)
-			break;
-
-		if (emc_parent_clk_sources[timing->parent_index] !=
-		    emc_parent_clk_sources[
-		      tegra->timings[timing_index].parent_index])
-			return timing;
-	}
-
-	return NULL;
-}
-
-static int emc_set_rate(struct clk_hw *hw, unsigned long rate,
-			unsigned long parent_rate)
-{
-	struct tegra_clk_emc *tegra;
-	struct emc_timing *timing = NULL;
-	int i, err;
-	u32 ram_code = tegra_read_ram_code();
-
-	tegra = container_of(hw, struct tegra_clk_emc, hw);
-
-	if (clk_hw_get_rate(hw) == rate)
-		return 0;
-
-	/*
-	 * When emc_set_timing changes the parent rate, CCF will propagate
-	 * that downward to us, so ignore any set_rate calls while a rate
-	 * change is already going on.
-	 */
-	if (tegra->changing_timing)
-		return 0;
-
-	for (i = 0; i < tegra->num_timings; i++) {
-		if (tegra->timings[i].rate == rate &&
-		    tegra->timings[i].ram_code == ram_code) {
-			timing = tegra->timings + i;
-			break;
-		}
-	}
-
-	if (!timing) {
-		pr_err("cannot switch to rate %ld without emc table\n", rate);
-		return -EINVAL;
-	}
-
-	if (emc_parent_clk_sources[emc_get_parent(hw)] ==
-	    emc_parent_clk_sources[timing->parent_index] &&
-	    clk_get_rate(timing->parent) != timing->parent_rate) {
-		/*
-		 * Parent clock source not changed but parent rate has changed,
-		 * need to temporarily switch to another parent
-		 */
-
-		struct emc_timing *backup_timing;
-
-		backup_timing = get_backup_timing(tegra, i);
-		if (!backup_timing) {
-			pr_err("cannot find backup timing\n");
-			return -EINVAL;
-		}
-
-		pr_debug("using %ld as backup rate when going to %ld\n",
-			 backup_timing->rate, rate);
-
-		err = emc_set_timing(tegra, backup_timing);
-		if (err) {
-			pr_err("cannot set backup timing: %d\n", err);
-			return err;
-		}
-	}
-
-	return emc_set_timing(tegra, timing);
-}
-
-/* Initialization and deinitialization */
-
-static int load_one_timing_from_dt(struct tegra_clk_emc *tegra,
-				   struct emc_timing *timing,
-				   struct device_node *node)
-{
-	int err, i;
-	u32 tmp;
-
-	err = of_property_read_u32(node, "clock-frequency", &tmp);
-	if (err) {
-		pr_err("timing %pOF: failed to read rate\n", node);
-		return err;
-	}
-
-	timing->rate = tmp;
-
-	err = of_property_read_u32(node, "nvidia,parent-clock-frequency", &tmp);
-	if (err) {
-		pr_err("timing %pOF: failed to read parent rate\n", node);
-		return err;
-	}
-
-	timing->parent_rate = tmp;
-
-	timing->parent = of_clk_get_by_name(node, "emc-parent");
-	if (IS_ERR(timing->parent)) {
-		pr_err("timing %pOF: failed to get parent clock\n", node);
-		return PTR_ERR(timing->parent);
-	}
-
-	timing->parent_index = 0xff;
-	i = match_string(emc_parent_clk_names, ARRAY_SIZE(emc_parent_clk_names),
-			 __clk_get_name(timing->parent));
-	if (i < 0) {
-		pr_err("timing %pOF: %s is not a valid parent\n",
-		       node, __clk_get_name(timing->parent));
-		clk_put(timing->parent);
-		return -EINVAL;
-	}
-
-	timing->parent_index = i;
-	return 0;
-}
-
-static int cmp_timings(const void *_a, const void *_b)
-{
-	const struct emc_timing *a = _a;
-	const struct emc_timing *b = _b;
-
-	if (a->rate < b->rate)
-		return -1;
-	else if (a->rate == b->rate)
-		return 0;
-	else
-		return 1;
-}
-
-static int load_timings_from_dt(struct tegra_clk_emc *tegra,
-				struct device_node *node,
-				u32 ram_code)
-{
-	struct emc_timing *timings_ptr;
-	struct device_node *child;
-	int child_count = of_get_child_count(node);
-	int i = 0, err;
-	size_t size;
-
-	size = (tegra->num_timings + child_count) * sizeof(struct emc_timing);
-
-	tegra->timings = krealloc(tegra->timings, size, GFP_KERNEL);
-	if (!tegra->timings)
-		return -ENOMEM;
-
-	timings_ptr = tegra->timings + tegra->num_timings;
-	tegra->num_timings += child_count;
-
-	for_each_child_of_node(node, child) {
-		struct emc_timing *timing = timings_ptr + (i++);
-
-		err = load_one_timing_from_dt(tegra, timing, child);
-		if (err) {
-			of_node_put(child);
-			return err;
-		}
-
-		timing->ram_code = ram_code;
-	}
-
-	sort(timings_ptr, child_count, sizeof(struct emc_timing),
-	     cmp_timings, NULL);
-
-	return 0;
-}
-
-static const struct clk_ops tegra_clk_emc_ops = {
-	.recalc_rate = emc_recalc_rate,
-	.determine_rate = emc_determine_rate,
-	.set_rate = emc_set_rate,
-	.get_parent = emc_get_parent,
-};
-
-struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np,
-				   spinlock_t *lock)
-{
-	struct tegra_clk_emc *tegra;
-	struct clk_init_data init;
-	struct device_node *node;
-	u32 node_ram_code;
-	struct clk *clk;
-	int err;
-
-	tegra = kcalloc(1, sizeof(*tegra), GFP_KERNEL);
-	if (!tegra)
-		return ERR_PTR(-ENOMEM);
-
-	tegra->clk_regs = base;
-	tegra->lock = lock;
-
-	tegra->num_timings = 0;
-
-	for_each_child_of_node(np, node) {
-		err = of_property_read_u32(node, "nvidia,ram-code",
-					   &node_ram_code);
-		if (err)
-			continue;
-
-		/*
-		 * Store timings for all ram codes as we cannot read the
-		 * fuses until the apbmisc driver is loaded.
-		 */
-		err = load_timings_from_dt(tegra, node, node_ram_code);
-		if (err) {
-			of_node_put(node);
-			return ERR_PTR(err);
-		}
-	}
-
-	if (tegra->num_timings == 0)
-		pr_warn("%s: no memory timings registered\n", __func__);
-
-	tegra->emc_node = of_parse_phandle(np,
-			"nvidia,external-memory-controller", 0);
-	if (!tegra->emc_node)
-		pr_warn("%s: couldn't find node for EMC driver\n", __func__);
-
-	init.name = "emc";
-	init.ops = &tegra_clk_emc_ops;
-	init.flags = CLK_IS_CRITICAL;
-	init.parent_names = emc_parent_clk_names;
-	init.num_parents = ARRAY_SIZE(emc_parent_clk_names);
-
-	tegra->hw.init = &init;
-
-	clk = clk_register(NULL, &tegra->hw);
-	if (IS_ERR(clk))
-		return clk;
-
-	tegra->prev_parent = clk_hw_get_parent_by_index(
-		&tegra->hw, emc_get_parent(&tegra->hw))->clk;
-	tegra->changing_timing = false;
-
-	/* Allow debugging tools to see the EMC clock */
-	clk_register_clkdev(clk, "emc", "tegra-clk-debug");
-
-	return clk;
-};
diff --git a/drivers/clk/tegra/clk-tegra124-emc.c b/drivers/clk/tegra/clk-tegra124-emc.c
new file mode 100644
index 000000000000..745f9faa98d8
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra124-emc.c
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/clk/tegra/clk-emc.c
+ *
+ * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author:
+ *	Mikko Perttunen <mperttunen@nvidia.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sort.h>
+#include <linux/string.h>
+
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/emc.h>
+
+#include "clk.h"
+
+#define CLK_SOURCE_EMC 0x19c
+
+#define CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_SHIFT 0
+#define CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK 0xff
+#define CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR(x) (((x) & CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK) << \
+					      CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_SHIFT)
+
+#define CLK_SOURCE_EMC_EMC_2X_CLK_SRC_SHIFT 29
+#define CLK_SOURCE_EMC_EMC_2X_CLK_SRC_MASK 0x7
+#define CLK_SOURCE_EMC_EMC_2X_CLK_SRC(x) (((x) & CLK_SOURCE_EMC_EMC_2X_CLK_SRC_MASK) << \
+					  CLK_SOURCE_EMC_EMC_2X_CLK_SRC_SHIFT)
+
+static const char * const emc_parent_clk_names[] = {
+	"pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud",
+	"pll_c2", "pll_c3", "pll_c_ud"
+};
+
+/*
+ * List of clock sources for various parents the EMC clock can have.
+ * When we change the timing to a timing with a parent that has the same
+ * clock source as the current parent, we must first change to a backup
+ * timing that has a different clock source.
+ */
+
+#define EMC_SRC_PLL_M 0
+#define EMC_SRC_PLL_C 1
+#define EMC_SRC_PLL_P 2
+#define EMC_SRC_CLK_M 3
+#define EMC_SRC_PLL_C2 4
+#define EMC_SRC_PLL_C3 5
+
+static const char emc_parent_clk_sources[] = {
+	EMC_SRC_PLL_M, EMC_SRC_PLL_C, EMC_SRC_PLL_P, EMC_SRC_CLK_M,
+	EMC_SRC_PLL_M, EMC_SRC_PLL_C2, EMC_SRC_PLL_C3, EMC_SRC_PLL_C
+};
+
+struct emc_timing {
+	unsigned long rate, parent_rate;
+	u8 parent_index;
+	struct clk *parent;
+	u32 ram_code;
+};
+
+struct tegra_clk_emc {
+	struct clk_hw hw;
+	void __iomem *clk_regs;
+	struct clk *prev_parent;
+	bool changing_timing;
+
+	struct device_node *emc_node;
+	struct tegra_emc *emc;
+
+	int num_timings;
+	struct emc_timing *timings;
+	spinlock_t *lock;
+};
+
+/* Common clock framework callback implementations */
+
+static unsigned long emc_recalc_rate(struct clk_hw *hw,
+				     unsigned long parent_rate)
+{
+	struct tegra_clk_emc *tegra;
+	u32 val, div;
+
+	tegra = container_of(hw, struct tegra_clk_emc, hw);
+
+	/*
+	 * CCF wrongly assumes that the parent won't change during set_rate,
+	 * so get the parent rate explicitly.
+	 */
+	parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
+
+	val = readl(tegra->clk_regs + CLK_SOURCE_EMC);
+	div = val & CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK;
+
+	return parent_rate / (div + 2) * 2;
+}
+
+/*
+ * Rounds up unless no higher rate exists, in which case down. This way is
+ * safer since things have EMC rate floors. Also don't touch parent_rate
+ * since we don't want the CCF to play with our parent clocks.
+ */
+static int emc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
+{
+	struct tegra_clk_emc *tegra;
+	u8 ram_code = tegra_read_ram_code();
+	struct emc_timing *timing = NULL;
+	int i, k, t;
+
+	tegra = container_of(hw, struct tegra_clk_emc, hw);
+
+	for (k = 0; k < tegra->num_timings; k++) {
+		if (tegra->timings[k].ram_code == ram_code)
+			break;
+	}
+
+	for (t = k; t < tegra->num_timings; t++) {
+		if (tegra->timings[t].ram_code != ram_code)
+			break;
+	}
+
+	for (i = k; i < t; i++) {
+		timing = tegra->timings + i;
+
+		if (timing->rate < req->rate && i != t - 1)
+			continue;
+
+		if (timing->rate > req->max_rate) {
+			i = max(i, k + 1);
+			req->rate = tegra->timings[i - 1].rate;
+			return 0;
+		}
+
+		if (timing->rate < req->min_rate)
+			continue;
+
+		req->rate = timing->rate;
+		return 0;
+	}
+
+	if (timing) {
+		req->rate = timing->rate;
+		return 0;
+	}
+
+	req->rate = clk_hw_get_rate(hw);
+	return 0;
+}
+
+static u8 emc_get_parent(struct clk_hw *hw)
+{
+	struct tegra_clk_emc *tegra;
+	u32 val;
+
+	tegra = container_of(hw, struct tegra_clk_emc, hw);
+
+	val = readl(tegra->clk_regs + CLK_SOURCE_EMC);
+
+	return (val >> CLK_SOURCE_EMC_EMC_2X_CLK_SRC_SHIFT)
+		& CLK_SOURCE_EMC_EMC_2X_CLK_SRC_MASK;
+}
+
+static struct tegra_emc *emc_ensure_emc_driver(struct tegra_clk_emc *tegra)
+{
+	struct platform_device *pdev;
+
+	if (tegra->emc)
+		return tegra->emc;
+
+	if (!tegra->emc_node)
+		return NULL;
+
+	pdev = of_find_device_by_node(tegra->emc_node);
+	if (!pdev) {
+		pr_err("%s: could not get external memory controller\n",
+		       __func__);
+		return NULL;
+	}
+
+	of_node_put(tegra->emc_node);
+	tegra->emc_node = NULL;
+
+	tegra->emc = platform_get_drvdata(pdev);
+	if (!tegra->emc) {
+		pr_err("%s: cannot find EMC driver\n", __func__);
+		return NULL;
+	}
+
+	return tegra->emc;
+}
+
+static int emc_set_timing(struct tegra_clk_emc *tegra,
+			  struct emc_timing *timing)
+{
+	int err;
+	u8 div;
+	u32 car_value;
+	unsigned long flags = 0;
+	struct tegra_emc *emc = emc_ensure_emc_driver(tegra);
+
+	if (!emc)
+		return -ENOENT;
+
+	pr_debug("going to rate %ld prate %ld p %s\n", timing->rate,
+		 timing->parent_rate, __clk_get_name(timing->parent));
+
+	if (emc_get_parent(&tegra->hw) == timing->parent_index &&
+	    clk_get_rate(timing->parent) != timing->parent_rate) {
+		WARN_ONCE(1, "parent %s rate mismatch %lu %lu\n",
+			  __clk_get_name(timing->parent),
+			  clk_get_rate(timing->parent),
+			  timing->parent_rate);
+		return -EINVAL;
+	}
+
+	tegra->changing_timing = true;
+
+	err = clk_set_rate(timing->parent, timing->parent_rate);
+	if (err) {
+		pr_err("cannot change parent %s rate to %ld: %d\n",
+		       __clk_get_name(timing->parent), timing->parent_rate,
+		       err);
+
+		return err;
+	}
+
+	err = clk_prepare_enable(timing->parent);
+	if (err) {
+		pr_err("cannot enable parent clock: %d\n", err);
+		return err;
+	}
+
+	div = timing->parent_rate / (timing->rate / 2) - 2;
+
+	err = tegra_emc_prepare_timing_change(emc, timing->rate);
+	if (err)
+		return err;
+
+	spin_lock_irqsave(tegra->lock, flags);
+
+	car_value = readl(tegra->clk_regs + CLK_SOURCE_EMC);
+
+	car_value &= ~CLK_SOURCE_EMC_EMC_2X_CLK_SRC(~0);
+	car_value |= CLK_SOURCE_EMC_EMC_2X_CLK_SRC(timing->parent_index);
+
+	car_value &= ~CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR(~0);
+	car_value |= CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR(div);
+
+	writel(car_value, tegra->clk_regs + CLK_SOURCE_EMC);
+
+	spin_unlock_irqrestore(tegra->lock, flags);
+
+	tegra_emc_complete_timing_change(emc, timing->rate);
+
+	clk_hw_reparent(&tegra->hw, __clk_get_hw(timing->parent));
+	clk_disable_unprepare(tegra->prev_parent);
+
+	tegra->prev_parent = timing->parent;
+	tegra->changing_timing = false;
+
+	return 0;
+}
+
+/*
+ * Get backup timing to use as an intermediate step when a change between
+ * two timings with the same clock source has been requested. First try to
+ * find a timing with a higher clock rate to avoid a rate below any set rate
+ * floors. If that is not possible, find a lower rate.
+ */
+static struct emc_timing *get_backup_timing(struct tegra_clk_emc *tegra,
+					    int timing_index)
+{
+	int i;
+	u32 ram_code = tegra_read_ram_code();
+	struct emc_timing *timing;
+
+	for (i = timing_index+1; i < tegra->num_timings; i++) {
+		timing = tegra->timings + i;
+		if (timing->ram_code != ram_code)
+			break;
+
+		if (emc_parent_clk_sources[timing->parent_index] !=
+		    emc_parent_clk_sources[
+		      tegra->timings[timing_index].parent_index])
+			return timing;
+	}
+
+	for (i = timing_index-1; i >= 0; --i) {
+		timing = tegra->timings + i;
+		if (timing->ram_code != ram_code)
+			break;
+
+		if (emc_parent_clk_sources[timing->parent_index] !=
+		    emc_parent_clk_sources[
+		      tegra->timings[timing_index].parent_index])
+			return timing;
+	}
+
+	return NULL;
+}
+
+static int emc_set_rate(struct clk_hw *hw, unsigned long rate,
+			unsigned long parent_rate)
+{
+	struct tegra_clk_emc *tegra;
+	struct emc_timing *timing = NULL;
+	int i, err;
+	u32 ram_code = tegra_read_ram_code();
+
+	tegra = container_of(hw, struct tegra_clk_emc, hw);
+
+	if (clk_hw_get_rate(hw) == rate)
+		return 0;
+
+	/*
+	 * When emc_set_timing changes the parent rate, CCF will propagate
+	 * that downward to us, so ignore any set_rate calls while a rate
+	 * change is already going on.
+	 */
+	if (tegra->changing_timing)
+		return 0;
+
+	for (i = 0; i < tegra->num_timings; i++) {
+		if (tegra->timings[i].rate == rate &&
+		    tegra->timings[i].ram_code == ram_code) {
+			timing = tegra->timings + i;
+			break;
+		}
+	}
+
+	if (!timing) {
+		pr_err("cannot switch to rate %ld without emc table\n", rate);
+		return -EINVAL;
+	}
+
+	if (emc_parent_clk_sources[emc_get_parent(hw)] ==
+	    emc_parent_clk_sources[timing->parent_index] &&
+	    clk_get_rate(timing->parent) != timing->parent_rate) {
+		/*
+		 * Parent clock source not changed but parent rate has changed,
+		 * need to temporarily switch to another parent
+		 */
+
+		struct emc_timing *backup_timing;
+
+		backup_timing = get_backup_timing(tegra, i);
+		if (!backup_timing) {
+			pr_err("cannot find backup timing\n");
+			return -EINVAL;
+		}
+
+		pr_debug("using %ld as backup rate when going to %ld\n",
+			 backup_timing->rate, rate);
+
+		err = emc_set_timing(tegra, backup_timing);
+		if (err) {
+			pr_err("cannot set backup timing: %d\n", err);
+			return err;
+		}
+	}
+
+	return emc_set_timing(tegra, timing);
+}
+
+/* Initialization and deinitialization */
+
+static int load_one_timing_from_dt(struct tegra_clk_emc *tegra,
+				   struct emc_timing *timing,
+				   struct device_node *node)
+{
+	int err, i;
+	u32 tmp;
+
+	err = of_property_read_u32(node, "clock-frequency", &tmp);
+	if (err) {
+		pr_err("timing %pOF: failed to read rate\n", node);
+		return err;
+	}
+
+	timing->rate = tmp;
+
+	err = of_property_read_u32(node, "nvidia,parent-clock-frequency", &tmp);
+	if (err) {
+		pr_err("timing %pOF: failed to read parent rate\n", node);
+		return err;
+	}
+
+	timing->parent_rate = tmp;
+
+	timing->parent = of_clk_get_by_name(node, "emc-parent");
+	if (IS_ERR(timing->parent)) {
+		pr_err("timing %pOF: failed to get parent clock\n", node);
+		return PTR_ERR(timing->parent);
+	}
+
+	timing->parent_index = 0xff;
+	i = match_string(emc_parent_clk_names, ARRAY_SIZE(emc_parent_clk_names),
+			 __clk_get_name(timing->parent));
+	if (i < 0) {
+		pr_err("timing %pOF: %s is not a valid parent\n",
+		       node, __clk_get_name(timing->parent));
+		clk_put(timing->parent);
+		return -EINVAL;
+	}
+
+	timing->parent_index = i;
+	return 0;
+}
+
+static int cmp_timings(const void *_a, const void *_b)
+{
+	const struct emc_timing *a = _a;
+	const struct emc_timing *b = _b;
+
+	if (a->rate < b->rate)
+		return -1;
+	else if (a->rate == b->rate)
+		return 0;
+	else
+		return 1;
+}
+
+static int load_timings_from_dt(struct tegra_clk_emc *tegra,
+				struct device_node *node,
+				u32 ram_code)
+{
+	struct emc_timing *timings_ptr;
+	struct device_node *child;
+	int child_count = of_get_child_count(node);
+	int i = 0, err;
+	size_t size;
+
+	size = (tegra->num_timings + child_count) * sizeof(struct emc_timing);
+
+	tegra->timings = krealloc(tegra->timings, size, GFP_KERNEL);
+	if (!tegra->timings)
+		return -ENOMEM;
+
+	timings_ptr = tegra->timings + tegra->num_timings;
+	tegra->num_timings += child_count;
+
+	for_each_child_of_node(node, child) {
+		struct emc_timing *timing = timings_ptr + (i++);
+
+		err = load_one_timing_from_dt(tegra, timing, child);
+		if (err) {
+			of_node_put(child);
+			return err;
+		}
+
+		timing->ram_code = ram_code;
+	}
+
+	sort(timings_ptr, child_count, sizeof(struct emc_timing),
+	     cmp_timings, NULL);
+
+	return 0;
+}
+
+static const struct clk_ops tegra_clk_emc_ops = {
+	.recalc_rate = emc_recalc_rate,
+	.determine_rate = emc_determine_rate,
+	.set_rate = emc_set_rate,
+	.get_parent = emc_get_parent,
+};
+
+struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np,
+				   spinlock_t *lock)
+{
+	struct tegra_clk_emc *tegra;
+	struct clk_init_data init;
+	struct device_node *node;
+	u32 node_ram_code;
+	struct clk *clk;
+	int err;
+
+	tegra = kcalloc(1, sizeof(*tegra), GFP_KERNEL);
+	if (!tegra)
+		return ERR_PTR(-ENOMEM);
+
+	tegra->clk_regs = base;
+	tegra->lock = lock;
+
+	tegra->num_timings = 0;
+
+	for_each_child_of_node(np, node) {
+		err = of_property_read_u32(node, "nvidia,ram-code",
+					   &node_ram_code);
+		if (err)
+			continue;
+
+		/*
+		 * Store timings for all ram codes as we cannot read the
+		 * fuses until the apbmisc driver is loaded.
+		 */
+		err = load_timings_from_dt(tegra, node, node_ram_code);
+		if (err) {
+			of_node_put(node);
+			return ERR_PTR(err);
+		}
+	}
+
+	if (tegra->num_timings == 0)
+		pr_warn("%s: no memory timings registered\n", __func__);
+
+	tegra->emc_node = of_parse_phandle(np,
+			"nvidia,external-memory-controller", 0);
+	if (!tegra->emc_node)
+		pr_warn("%s: couldn't find node for EMC driver\n", __func__);
+
+	init.name = "emc";
+	init.ops = &tegra_clk_emc_ops;
+	init.flags = CLK_IS_CRITICAL;
+	init.parent_names = emc_parent_clk_names;
+	init.num_parents = ARRAY_SIZE(emc_parent_clk_names);
+
+	tegra->hw.init = &init;
+
+	clk = clk_register(NULL, &tegra->hw);
+	if (IS_ERR(clk))
+		return clk;
+
+	tegra->prev_parent = clk_hw_get_parent_by_index(
+		&tegra->hw, emc_get_parent(&tegra->hw))->clk;
+	tegra->changing_timing = false;
+
+	/* Allow debugging tools to see the EMC clock */
+	clk_register_clkdev(clk, "emc", "tegra-clk-debug");
+
+	return clk;
+};
diff --git a/drivers/clk/tegra/clk-tegra210-emc.c b/drivers/clk/tegra/clk-tegra210-emc.c
new file mode 100644
index 000000000000..352a2c3fc374
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra210-emc.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/tegra.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define CLK_SOURCE_EMC 0x19c
+#define  CLK_SOURCE_EMC_2X_CLK_SRC GENMASK(31, 29)
+#define  CLK_SOURCE_EMC_MC_EMC_SAME_FREQ BIT(16)
+#define  CLK_SOURCE_EMC_2X_CLK_DIVISOR GENMASK(7, 0)
+
+#define CLK_SRC_PLLM 0
+#define CLK_SRC_PLLC 1
+#define CLK_SRC_PLLP 2
+#define CLK_SRC_CLK_M 3
+#define CLK_SRC_PLLM_UD 4
+#define CLK_SRC_PLLMB_UD 5
+#define CLK_SRC_PLLMB 6
+#define CLK_SRC_PLLP_UD 7
+
+struct tegra210_clk_emc {
+	struct clk_hw hw;
+	void __iomem *regs;
+
+	struct tegra210_clk_emc_provider *provider;
+
+	struct clk *parents[8];
+};
+
+static inline struct tegra210_clk_emc *
+to_tegra210_clk_emc(struct clk_hw *hw)
+{
+	return container_of(hw, struct tegra210_clk_emc, hw);
+}
+
+static const char *tegra210_clk_emc_parents[] = {
+	"pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_mb_ud",
+	"pll_mb", "pll_p_ud",
+};
+
+static u8 tegra210_clk_emc_get_parent(struct clk_hw *hw)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	u32 value;
+	u8 src;
+
+	value = readl_relaxed(emc->regs + CLK_SOURCE_EMC);
+	src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, value);
+
+	return src;
+}
+
+static unsigned long tegra210_clk_emc_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	u32 value, div;
+
+	/*
+	 * CCF assumes that neither the parent nor its rate will change during
+	 * ->set_rate(), so the parent rate passed in here was cached from the
+	 * parent before the ->set_rate() call.
+	 *
+	 * This can lead to wrong results being reported for the EMC clock if
+	 * the parent and/or parent rate have changed as part of the EMC rate
+	 * change sequence. Fix this by overriding the parent clock with what
+	 * we know to be the correct value after the rate change.
+	 */
+	parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
+
+	value = readl_relaxed(emc->regs + CLK_SOURCE_EMC);
+
+	div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, value);
+	div += 2;
+
+	return DIV_ROUND_UP(parent_rate * 2, div);
+}
+
+static long tegra210_clk_emc_round_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long *prate)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	struct tegra210_clk_emc_provider *provider = emc->provider;
+	unsigned int i;
+
+	if (!provider || !provider->configs || provider->num_configs == 0)
+		return clk_hw_get_rate(hw);
+
+	for (i = 0; i < provider->num_configs; i++) {
+		if (provider->configs[i].rate >= rate)
+			return provider->configs[i].rate;
+	}
+
+	return provider->configs[i - 1].rate;
+}
+
+static struct clk *tegra210_clk_emc_find_parent(struct tegra210_clk_emc *emc,
+						u8 index)
+{
+	struct clk_hw *parent = clk_hw_get_parent_by_index(&emc->hw, index);
+	const char *name = clk_hw_get_name(parent);
+
+	/* XXX implement cache? */
+
+	return __clk_lookup(name);
+}
+
+static int tegra210_clk_emc_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	struct tegra210_clk_emc_provider *provider = emc->provider;
+	struct tegra210_clk_emc_config *config;
+	struct device *dev = provider->dev;
+	struct clk_hw *old, *new, *parent;
+	u8 old_idx, new_idx, index;
+	struct clk *clk;
+	unsigned int i;
+	int err;
+
+	if (!provider || !provider->configs || provider->num_configs == 0)
+		return -EINVAL;
+
+	for (i = 0; i < provider->num_configs; i++) {
+		if (provider->configs[i].rate >= rate) {
+			config = &provider->configs[i];
+			break;
+		}
+	}
+
+	if (i == provider->num_configs)
+		config = &provider->configs[i - 1];
+
+	old_idx = tegra210_clk_emc_get_parent(hw);
+	new_idx = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value);
+
+	old = clk_hw_get_parent_by_index(hw, old_idx);
+	new = clk_hw_get_parent_by_index(hw, new_idx);
+
+	/* if the rate has changed... */
+	if (config->parent_rate != clk_hw_get_rate(old)) {
+		/* ... but the clock source remains the same ... */
+		if (new_idx == old_idx) {
+			/* ... switch to the alternative clock source. */
+			switch (new_idx) {
+			case CLK_SRC_PLLM:
+				new_idx = CLK_SRC_PLLMB;
+				break;
+
+			case CLK_SRC_PLLM_UD:
+				new_idx = CLK_SRC_PLLMB_UD;
+				break;
+
+			case CLK_SRC_PLLMB_UD:
+				new_idx = CLK_SRC_PLLM_UD;
+				break;
+
+			case CLK_SRC_PLLMB:
+				new_idx = CLK_SRC_PLLM;
+				break;
+			}
+
+			/*
+			 * This should never happen because we can't deal with
+			 * it.
+			 */
+			if (WARN_ON(new_idx == old_idx))
+				return -EINVAL;
+
+			new = clk_hw_get_parent_by_index(hw, new_idx);
+		}
+
+		index = new_idx;
+		parent = new;
+	} else {
+		index = old_idx;
+		parent = old;
+	}
+
+	clk = tegra210_clk_emc_find_parent(emc, index);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(dev, "failed to get parent clock for index %u: %d\n",
+			index, err);
+		return err;
+	}
+
+	/* set the new parent clock to the required rate */
+	if (clk_get_rate(clk) != config->parent_rate) {
+		err = clk_set_rate(clk, config->parent_rate);
+		if (err < 0) {
+			dev_err(dev, "failed to set rate %lu Hz for %pC: %d\n",
+				config->parent_rate, clk, err);
+			return err;
+		}
+	}
+
+	/* enable the new parent clock */
+	if (parent != old) {
+		err = clk_prepare_enable(clk);
+		if (err < 0) {
+			dev_err(dev, "failed to enable parent clock %pC: %d\n",
+				clk, err);
+			return err;
+		}
+	}
+
+	/* update the EMC source configuration to reflect the new parent */
+	config->value &= ~CLK_SOURCE_EMC_2X_CLK_SRC;
+	config->value |= FIELD_PREP(CLK_SOURCE_EMC_2X_CLK_SRC, index);
+
+	/*
+	 * Finally, switch the EMC programming with both old and new parent
+	 * clocks enabled.
+	 */
+	err = provider->set_rate(dev, config);
+	if (err < 0) {
+		dev_err(dev, "failed to set EMC rate to %lu Hz: %d\n", rate,
+			err);
+
+		/*
+		 * If we're unable to switch to the new EMC frequency, we no
+		 * longer need the new parent to be enabled.
+		 */
+		if (parent != old)
+			clk_disable_unprepare(clk);
+
+		return err;
+	}
+
+	/* reparent to new parent clock and disable the old parent clock */
+	if (parent != old) {
+		clk = tegra210_clk_emc_find_parent(emc, old_idx);
+		if (IS_ERR(clk)) {
+			err = PTR_ERR(clk);
+			dev_err(dev,
+				"failed to get parent clock for index %u: %d\n",
+				old_idx, err);
+			return err;
+		}
+
+		clk_hw_reparent(hw, parent);
+		clk_disable_unprepare(clk);
+	}
+
+	return err;
+}
+
+static const struct clk_ops tegra210_clk_emc_ops = {
+	.get_parent = tegra210_clk_emc_get_parent,
+	.recalc_rate = tegra210_clk_emc_recalc_rate,
+	.round_rate = tegra210_clk_emc_round_rate,
+	.set_rate = tegra210_clk_emc_set_rate,
+};
+
+struct clk *tegra210_clk_register_emc(struct device_node *np,
+				      void __iomem *regs)
+{
+	struct tegra210_clk_emc *emc;
+	struct clk_init_data init;
+	struct clk *clk;
+
+	emc = kzalloc(sizeof(*emc), GFP_KERNEL);
+	if (!emc)
+		return ERR_PTR(-ENOMEM);
+
+	emc->regs = regs;
+
+	init.name = "emc";
+	init.ops = &tegra210_clk_emc_ops;
+	init.flags = CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE;
+	init.parent_names = tegra210_clk_emc_parents;
+	init.num_parents = ARRAY_SIZE(tegra210_clk_emc_parents);
+	emc->hw.init = &init;
+
+	clk = clk_register(NULL, &emc->hw);
+	if (IS_ERR(clk)) {
+		kfree(emc);
+		return clk;
+	}
+
+	return clk;
+}
+
+int tegra210_clk_emc_attach(struct clk *clk,
+			    struct tegra210_clk_emc_provider *provider)
+{
+	struct clk_hw *hw = __clk_get_hw(clk);
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
+	struct device *dev = provider->dev;
+	unsigned int i;
+	int err;
+
+	if (!try_module_get(provider->owner))
+		return -ENODEV;
+
+	for (i = 0; i < provider->num_configs; i++) {
+		struct tegra210_clk_emc_config *config = &provider->configs[i];
+		struct clk_hw *parent;
+		bool same_freq;
+		u8 div, src;
+
+		div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, config->value);
+		src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value);
+
+		/* do basic sanity checking on the EMC timings */
+		if (div & 0x1) {
+			dev_err(dev, "invalid odd divider %u for rate %lu Hz\n",
+				div, config->rate);
+			err = -EINVAL;
+			goto put;
+		}
+
+		same_freq = config->value & CLK_SOURCE_EMC_MC_EMC_SAME_FREQ;
+
+		if (same_freq != config->same_freq) {
+			dev_err(dev,
+				"ambiguous EMC to MC ratio for rate %lu Hz\n",
+				config->rate);
+			err = -EINVAL;
+			goto put;
+		}
+
+		parent = clk_hw_get_parent_by_index(hw, src);
+		config->parent = src;
+
+		if (src == CLK_SRC_PLLM || src == CLK_SRC_PLLM_UD) {
+			config->parent_rate = config->rate * (1 + div / 2);
+		} else {
+			unsigned long rate = config->rate * (1 + div / 2);
+
+			config->parent_rate = clk_hw_get_rate(parent);
+
+			if (config->parent_rate != rate) {
+				dev_err(dev,
+					"rate %lu Hz does not match input\n",
+					config->rate);
+				err = -EINVAL;
+				goto put;
+			}
+		}
+	}
+
+	emc->provider = provider;
+
+	return 0;
+
+put:
+	module_put(provider->owner);
+	return err;
+}
+EXPORT_SYMBOL_GPL(tegra210_clk_emc_attach);
+
+void tegra210_clk_emc_detach(struct clk *clk)
+{
+	struct tegra210_clk_emc *emc = to_tegra210_clk_emc(__clk_get_hw(clk));
+
+	module_put(emc->provider->owner);
+	emc->provider = NULL;
+}
+EXPORT_SYMBOL_GPL(tegra210_clk_emc_detach);
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index defe3b7ebfa4..f2bb188fbc6a 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -37,6 +37,7 @@
 #define CLK_SOURCE_LA 0x1f8
 #define CLK_SOURCE_SDMMC2 0x154
 #define CLK_SOURCE_SDMMC4 0x164
+#define CLK_SOURCE_EMC_DLL 0x664
 
 #define PLLC_BASE 0x80
 #define PLLC_OUT 0x84
@@ -227,6 +228,10 @@
 #define RST_DFLL_DVCO 0x2f4
 #define DVFS_DFLL_RESET_SHIFT 0
 
+#define CLK_RST_CONTROLLER_CLK_OUT_ENB_X_SET	0x284
+#define CLK_RST_CONTROLLER_CLK_OUT_ENB_X_CLR	0x288
+#define CLK_OUT_ENB_X_CLK_ENB_EMC_DLL		BIT(14)
+
 #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
 #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
 #define CPU_SOFTRST_CTRL 0x380
@@ -314,12 +319,6 @@ static unsigned long tegra210_input_freq[] = {
 	[8] = 12000000,
 };
 
-static const char *mux_pllmcp_clkm[] = {
-	"pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_mb", "pll_mb",
-	"pll_p",
-};
-#define mux_pllmcp_clkm_idx NULL
-
 #define PLL_ENABLE			(1 << 30)
 
 #define PLLCX_MISC1_IDDQ		(1 << 27)
@@ -555,6 +554,27 @@ void tegra210_set_sata_pll_seq_sw(bool state)
 }
 EXPORT_SYMBOL_GPL(tegra210_set_sata_pll_seq_sw);
 
+void tegra210_clk_emc_dll_enable(bool flag)
+{
+	u32 offset = flag ? CLK_RST_CONTROLLER_CLK_OUT_ENB_X_SET :
+		     CLK_RST_CONTROLLER_CLK_OUT_ENB_X_CLR;
+
+	writel_relaxed(CLK_OUT_ENB_X_CLK_ENB_EMC_DLL, clk_base + offset);
+}
+EXPORT_SYMBOL_GPL(tegra210_clk_emc_dll_enable);
+
+void tegra210_clk_emc_dll_update_setting(u32 emc_dll_src_value)
+{
+	writel_relaxed(emc_dll_src_value, clk_base + CLK_SOURCE_EMC_DLL);
+}
+EXPORT_SYMBOL_GPL(tegra210_clk_emc_dll_update_setting);
+
+void tegra210_clk_emc_update_setting(u32 emc_src_value)
+{
+	writel_relaxed(emc_src_value, clk_base + CLK_SOURCE_EMC);
+}
+EXPORT_SYMBOL_GPL(tegra210_clk_emc_update_setting);
+
 static void tegra210_generic_mbist_war(struct tegra210_domain_mbist_war *mbist)
 {
 	u32 val;
@@ -2310,7 +2330,6 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_i2c2] = { .dt_id = TEGRA210_CLK_I2C2, .present = true },
 	[tegra_clk_uartc_8] = { .dt_id = TEGRA210_CLK_UARTC, .present = true },
 	[tegra_clk_mipi_cal] = { .dt_id = TEGRA210_CLK_MIPI_CAL, .present = true },
-	[tegra_clk_emc] = { .dt_id = TEGRA210_CLK_EMC, .present = true },
 	[tegra_clk_usb2] = { .dt_id = TEGRA210_CLK_USB2, .present = true },
 	[tegra_clk_bsev] = { .dt_id = TEGRA210_CLK_BSEV, .present = true },
 	[tegra_clk_uartd_8] = { .dt_id = TEGRA210_CLK_UARTD, .present = true },
@@ -2953,6 +2972,27 @@ static const char * const sor1_parents[] = {
 
 static u32 sor1_parents_idx[] = { 0, 2, 5, 6 };
 
+static const struct clk_div_table mc_div_table_tegra210[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 4 },
+	{ .val = 2, .div = 1 },
+	{ .val = 3, .div = 2 },
+	{ .val = 0, .div = 0 },
+};
+
+static void tegra210_clk_register_mc(const char *name,
+				     const char *parent_name)
+{
+	struct clk *clk;
+
+	clk = clk_register_divider_table(NULL, name, parent_name,
+					 CLK_IS_CRITICAL,
+					 clk_base + CLK_SOURCE_EMC,
+					 15, 2, CLK_DIVIDER_READ_ONLY,
+					 mc_div_table_tegra210, &emc_lock);
+	clks[TEGRA210_CLK_MC] = clk;
+}
+
 static const char * const sor1_out_parents[] = {
 	/*
 	 * Bit 0 of the mux selects sor1_pad_clkout, irrespective of bit 1, so
@@ -2995,7 +3035,8 @@ static const char * const la_parents[] = {
 static struct tegra_clk_periph tegra210_la =
 	TEGRA_CLK_PERIPH(29, 7, 9, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, 76, 0, NULL, NULL);
 
-static __init void tegra210_periph_clk_init(void __iomem *clk_base,
+static __init void tegra210_periph_clk_init(struct device_node *np,
+					    void __iomem *clk_base,
 					    void __iomem *pmc_base)
 {
 	struct clk *clk;
@@ -3041,16 +3082,6 @@ static __init void tegra210_periph_clk_init(void __iomem *clk_base,
 			CLK_SOURCE_LA, 0);
 	clks[TEGRA210_CLK_LA] = clk;
 
-	/* emc mux */
-	clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
-			       ARRAY_SIZE(mux_pllmcp_clkm), 0,
-			       clk_base + CLK_SOURCE_EMC,
-			       29, 3, 0, &emc_lock);
-
-	clk = tegra_clk_register_mc("mc", "emc_mux", clk_base + CLK_SOURCE_EMC,
-				    &emc_lock);
-	clks[TEGRA210_CLK_MC] = clk;
-
 	/* cml0 */
 	clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX,
 				0, 0, &pll_e_lock);
@@ -3093,6 +3124,13 @@ static __init void tegra210_periph_clk_init(void __iomem *clk_base,
 	}
 
 	tegra_periph_clk_init(clk_base, pmc_base, tegra210_clks, &pll_p_params);
+
+	/* emc */
+	clk = tegra210_clk_register_emc(np, clk_base);
+	clks[TEGRA210_CLK_EMC] = clk;
+
+	/* mc */
+	tegra210_clk_register_mc("mc", "emc");
 }
 
 static void __init tegra210_pll_init(void __iomem *clk_base,
@@ -3153,6 +3191,17 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
 	clk_register_clkdev(clk, "pll_m_ud", NULL);
 	clks[TEGRA210_CLK_PLL_M_UD] = clk;
 
+	/* PLLMB_UD */
+	clk = clk_register_fixed_factor(NULL, "pll_mb_ud", "pll_mb",
+					CLK_SET_RATE_PARENT, 1, 1);
+	clk_register_clkdev(clk, "pll_mb_ud", NULL);
+	clks[TEGRA210_CLK_PLL_MB_UD] = clk;
+
+	/* PLLP_UD */
+	clk = clk_register_fixed_factor(NULL, "pll_p_ud", "pll_p",
+					0, 1, 1);
+	clks[TEGRA210_CLK_PLL_P_UD] = clk;
+
 	/* PLLU_VCO */
 	if (!tegra210_init_pllu()) {
 		clk = clk_register_fixed_rate(NULL, "pll_u_vco", "pll_ref", 0,
@@ -3680,7 +3729,7 @@ static void __init tegra210_clock_init(struct device_node *np)
 
 	tegra_fixed_clk_init(tegra210_clks);
 	tegra210_pll_init(clk_base, pmc_base);
-	tegra210_periph_clk_init(clk_base, pmc_base);
+	tegra210_periph_clk_init(np, clk_base, pmc_base);
 	tegra_audio_clk_init(clk_base, pmc_base, tegra210_clks,
 			     tegra210_audio_plls,
 			     ARRAY_SIZE(tegra210_audio_plls), 24576000);
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 2c9a68302e02..09cc700bab41 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -866,7 +866,7 @@ void tegra_super_clk_gen5_init(void __iomem *clk_base,
 			void __iomem *pmc_base, struct tegra_clk *tegra_clks,
 			struct tegra_clk_pll_params *pll_params);
 
-#ifdef CONFIG_TEGRA_CLK_EMC
+#ifdef CONFIG_TEGRA124_EMC
 struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np,
 				   spinlock_t *lock);
 #else
@@ -907,4 +907,7 @@ void tegra_clk_periph_resume(void);
 bool tegra20_clk_emc_driver_available(struct clk_hw *emc_hw);
 struct clk *tegra20_clk_register_emc(void __iomem *ioaddr, bool low_jitter);
 
+struct clk *tegra210_clk_register_emc(struct device_node *np,
+				      void __iomem *regs);
+
 #endif /* TEGRA_CLK_H */
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 1d740a8c42ab..5bf514c78d8b 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -25,8 +25,8 @@
 #define TCORB	6
 #define _8TCNT	8
 
-#define CMIEA	6
-#define CMFA	6
+#define OVIE	5
+#define OVF	5
 
 #define FLAG_STARTED (1 << 3)
 
@@ -40,6 +40,7 @@ struct timer8_priv {
 	void __iomem *mapbase;
 	unsigned long flags;
 	unsigned int rate;
+	uint16_t cnt;
 };
 
 static irqreturn_t timer8_interrupt(int irq, void *dev_id)
@@ -51,7 +52,8 @@ static irqreturn_t timer8_interrupt(int irq, void *dev_id)
 
 	p->ced.event_handler(&p->ced);
 
-	bclr(CMFA, p->mapbase + _8TCSR);
+	iowrite16be(p->cnt, p->mapbase + _8TCNT);
+	bclr(OVF, p->mapbase + _8TCSR);
 
 	return IRQ_HANDLED;
 }
@@ -60,16 +62,14 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
 {
 	if (delta >= 0x10000)
 		pr_warn("delta out of range\n");
-	bclr(CMIEA, p->mapbase + _8TCR);
-	iowrite16be(delta, p->mapbase + TCORA);
-	iowrite16be(0x0000, p->mapbase + _8TCNT);
-	bclr(CMFA, p->mapbase + _8TCSR);
-	bset(CMIEA, p->mapbase + _8TCR);
+	p->cnt = 0x10000 - delta;
+	iowrite16be(p->cnt, p->mapbase + _8TCNT);
+	bclr(OVF, p->mapbase + _8TCSR);
+	bset(OVIE, p->mapbase + _8TCR);
 }
 
 static int timer8_enable(struct timer8_priv *p)
 {
-	iowrite16be(0xffff, p->mapbase + TCORA);
 	iowrite16be(0x0000, p->mapbase + _8TCNT);
 	iowrite16be(0x0c02, p->mapbase + _8TCR);
 
@@ -177,7 +177,7 @@ static int __init h8300_8timer_init(struct device_node *node)
 	}
 
 	ret = -EINVAL;
-	irq = irq_of_parse_and_map(node, 0);
+	irq = irq_of_parse_and_map(node, 2);
 	if (!irq) {
 		pr_err("failed to get irq for clockevent\n");
 		goto unmap_reg;
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 15c1a1231516..9481292981f0 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -317,6 +317,7 @@ config ARM_TEGRA186_CPUFREQ
 config ARM_TI_CPUFREQ
 	bool "Texas Instruments CPUFreq support"
 	depends on ARCH_OMAP2PLUS
+	default ARCH_OMAP2PLUS
 	help
 	  This driver enables valid OPPs on the running platform based on
 	  values contained within the SoC in use. Enable this in order to
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index cb9db16bea61..e8e20fef400b 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -53,6 +53,7 @@ static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "renesas,r7s72100", },
 	{ .compatible = "renesas,r8a73a4", },
 	{ .compatible = "renesas,r8a7740", },
+	{ .compatible = "renesas,r8a7742", },
 	{ .compatible = "renesas,r8a7743", },
 	{ .compatible = "renesas,r8a7744", },
 	{ .compatible = "renesas,r8a7745", },
@@ -105,6 +106,7 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "calxeda,highbank", },
 	{ .compatible = "calxeda,ecx-2000", },
 
+	{ .compatible = "fsl,imx7ulp", },
 	{ .compatible = "fsl,imx7d", },
 	{ .compatible = "fsl,imx8mq", },
 	{ .compatible = "fsl,imx8mm", },
diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c
index de206d2745fe..3fe9125156b4 100644
--- a/drivers/cpufreq/imx-cpufreq-dt.c
+++ b/drivers/cpufreq/imx-cpufreq-dt.c
@@ -3,7 +3,9 @@
  * Copyright 2019 NXP
  */
 
+#include <linux/clk.h>
 #include <linux/cpu.h>
+#include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -12,8 +14,11 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
+#include "cpufreq-dt.h"
+
 #define OCOTP_CFG3_SPEED_GRADE_SHIFT	8
 #define OCOTP_CFG3_SPEED_GRADE_MASK	(0x3 << 8)
 #define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK	(0xf << 8)
@@ -22,20 +27,92 @@
 #define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT    5
 #define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 5)
 
+#define IMX7ULP_MAX_RUN_FREQ	528000
+
 /* cpufreq-dt device registered by imx-cpufreq-dt */
 static struct platform_device *cpufreq_dt_pdev;
 static struct opp_table *cpufreq_opp_table;
+static struct device *cpu_dev;
+
+enum IMX7ULP_CPUFREQ_CLKS {
+	ARM,
+	CORE,
+	SCS_SEL,
+	HSRUN_CORE,
+	HSRUN_SCS_SEL,
+	FIRC,
+};
+
+static struct clk_bulk_data imx7ulp_clks[] = {
+	{ .id = "arm" },
+	{ .id = "core" },
+	{ .id = "scs_sel" },
+	{ .id = "hsrun_core" },
+	{ .id = "hsrun_scs_sel" },
+	{ .id = "firc" },
+};
+
+static unsigned int imx7ulp_get_intermediate(struct cpufreq_policy *policy,
+					     unsigned int index)
+{
+	return clk_get_rate(imx7ulp_clks[FIRC].clk);
+}
+
+static int imx7ulp_target_intermediate(struct cpufreq_policy *policy,
+					unsigned int index)
+{
+	unsigned int newfreq = policy->freq_table[index].frequency;
+
+	clk_set_parent(imx7ulp_clks[SCS_SEL].clk, imx7ulp_clks[FIRC].clk);
+	clk_set_parent(imx7ulp_clks[HSRUN_SCS_SEL].clk, imx7ulp_clks[FIRC].clk);
+
+	if (newfreq > IMX7ULP_MAX_RUN_FREQ)
+		clk_set_parent(imx7ulp_clks[ARM].clk,
+			       imx7ulp_clks[HSRUN_CORE].clk);
+	else
+		clk_set_parent(imx7ulp_clks[ARM].clk, imx7ulp_clks[CORE].clk);
+
+	return 0;
+}
+
+static struct cpufreq_dt_platform_data imx7ulp_data = {
+	.target_intermediate = imx7ulp_target_intermediate,
+	.get_intermediate = imx7ulp_get_intermediate,
+};
 
 static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 {
-	struct device *cpu_dev = get_cpu_device(0);
+	struct platform_device *dt_pdev;
 	u32 cell_value, supported_hw[2];
 	int speed_grade, mkt_segment;
 	int ret;
 
+	cpu_dev = get_cpu_device(0);
+
 	if (!of_find_property(cpu_dev->of_node, "cpu-supply", NULL))
 		return -ENODEV;
 
+	if (of_machine_is_compatible("fsl,imx7ulp")) {
+		ret = clk_bulk_get(cpu_dev, ARRAY_SIZE(imx7ulp_clks),
+				   imx7ulp_clks);
+		if (ret)
+			return ret;
+
+		dt_pdev = platform_device_register_data(NULL, "cpufreq-dt",
+							-1, &imx7ulp_data,
+							sizeof(imx7ulp_data));
+		if (IS_ERR(dt_pdev)) {
+			clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks);
+			ret = PTR_ERR(dt_pdev);
+			dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
+			return ret;
+		}
+
+		cpufreq_dt_pdev = dt_pdev;
+
+		return 0;
+	}
+
 	ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value);
 	if (ret)
 		return ret;
@@ -98,7 +175,10 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 static int imx_cpufreq_dt_remove(struct platform_device *pdev)
 {
 	platform_device_unregister(cpufreq_dt_pdev);
-	dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+	if (!of_machine_is_compatible("fsl,imx7ulp"))
+		dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+	else
+		clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks);
 
 	return 0;
 }
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 4d1e25d1ced1..8e23a698ce04 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -1059,7 +1059,7 @@ static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b,
 
 	update_turbo_state();
 	if (global.turbo_disabled) {
-		pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
+		pr_notice_once("Turbo disabled by BIOS or unavailable on processor\n");
 		mutex_unlock(&intel_pstate_limits_lock);
 		mutex_unlock(&intel_pstate_driver_lock);
 		return -EPERM;
@@ -2771,6 +2771,8 @@ static int __init intel_pstate_init(void)
 		pr_info("Invalid MSRs\n");
 		return -ENODEV;
 	}
+	/* Without HWP start in the passive mode. */
+	default_driver = &intel_cpufreq;
 
 hwp_cpu_matched:
 	/*
@@ -2816,7 +2818,6 @@ static int __init intel_pstate_setup(char *str)
 	if (!strcmp(str, "disable")) {
 		no_load = 1;
 	} else if (!strcmp(str, "passive")) {
-		pr_info("Passive mode enabled\n");
 		default_driver = &intel_cpufreq;
 		no_hwp = 1;
 	}
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index 909f40fbcde2..d05e761d9572 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 
-#include <asm/clock.h>
 #include <asm/idle.h>
 
 #include <asm/mach-loongson2ef/loongson.h>
@@ -58,29 +57,20 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
 	     loongson2_clockmod_table[index].driver_data) / 8;
 
 	/* setting the cpu frequency */
-	clk_set_rate(policy->clk, freq * 1000);
+	loongson2_cpu_set_rate(freq);
 
 	return 0;
 }
 
 static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
-	struct clk *cpuclk;
 	int i;
 	unsigned long rate;
 	int ret;
 
-	cpuclk = clk_get(NULL, "cpu_clk");
-	if (IS_ERR(cpuclk)) {
-		pr_err("couldn't get CPU clk\n");
-		return PTR_ERR(cpuclk);
-	}
-
 	rate = cpu_clock_freq / 1000;
-	if (!rate) {
-		clk_put(cpuclk);
+	if (!rate)
 		return -EINVAL;
-	}
 
 	/* clock table init */
 	for (i = 2;
@@ -88,20 +78,16 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	     i++)
 		loongson2_clockmod_table[i].frequency = (rate * i) / 8;
 
-	ret = clk_set_rate(cpuclk, rate * 1000);
-	if (ret) {
-		clk_put(cpuclk);
+	ret = loongson2_cpu_set_rate(rate);
+	if (ret)
 		return ret;
-	}
 
-	policy->clk = cpuclk;
 	cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0);
 	return 0;
 }
 
 static int loongson2_cpufreq_exit(struct cpufreq_policy *policy)
 {
-	clk_put(policy->clk);
 	return 0;
 }
 
diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c
index a5fd8975f3d3..a6abb701bfc6 100644
--- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c
+++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c
@@ -8,7 +8,7 @@
  * This file add support for AES cipher with 128,192,256 bits keysize in
  * CBC and ECB mode.
  *
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
  */
 
 #include <linux/crypto.h>
diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
index 3e4e4bbda34c..b957061424a1 100644
--- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
+++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
@@ -7,7 +7,7 @@
  *
  * Core file which registers crypto algorithms supported by the CryptoEngine.
  *
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
  */
 #include <linux/clk.h>
 #include <linux/crypto.h>
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
index 84d52fc3a2da..c89cb2ee2496 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
@@ -8,7 +8,7 @@
  * This file add support for AES cipher with 128,192,256 bits keysize in
  * CBC and ECB mode.
  *
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
  */
 
 #include <linux/crypto.h>
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
index 6b301afffd11..5d9d0fedcb06 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
@@ -7,7 +7,7 @@
  *
  * Core file which registers crypto algorithms supported by the SecuritySystem
  *
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
  */
 #include <linux/clk.h>
 #include <linux/crypto.h>
@@ -537,10 +537,8 @@ static int sun8i_ss_probe(struct platform_device *pdev)
 		return err;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(ss->dev, "Cannot get SecuritySystem IRQ\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ss->reset = devm_reset_control_get(&pdev->dev, NULL);
 	if (IS_ERR(ss->reset)) {
diff --git a/drivers/crypto/amlogic/amlogic-gxl-core.c b/drivers/crypto/amlogic/amlogic-gxl-core.c
index 9d4ead2f7ebb..411857fad8ba 100644
--- a/drivers/crypto/amlogic/amlogic-gxl-core.c
+++ b/drivers/crypto/amlogic/amlogic-gxl-core.c
@@ -253,10 +253,8 @@ static int meson_crypto_probe(struct platform_device *pdev)
 	mc->irqs = devm_kcalloc(mc->dev, MAXFLOW, sizeof(int), GFP_KERNEL);
 	for (i = 0; i < MAXFLOW; i++) {
 		mc->irqs[i] = platform_get_irq(pdev, i);
-		if (mc->irqs[i] < 0) {
-			dev_err(mc->dev, "Cannot get IRQ for flow %d\n", i);
+		if (mc->irqs[i] < 0)
 			return mc->irqs[i];
-		}
 
 		err = devm_request_irq(&pdev->dev, mc->irqs[i], meson_irq_handler, 0,
 				       "gxl-crypto", mc);
diff --git a/drivers/crypto/bcm/cipher.c b/drivers/crypto/bcm/cipher.c
index c8b9408541a9..5db23c18c81f 100644
--- a/drivers/crypto/bcm/cipher.c
+++ b/drivers/crypto/bcm/cipher.c
@@ -4724,7 +4724,6 @@ static int spu_dt_read(struct platform_device *pdev)
 	spu->spu_type = matched_spu_type->type;
 	spu->spu_subtype = matched_spu_type->subtype;
 
-	i = 0;
 	for (i = 0; (i < MAX_SPUS) && ((spu_ctrl_regs =
 		platform_get_resource(pdev, IORESOURCE_MEM, i)) != NULL); i++) {
 
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index b7bb7c30adeb..b2f9882bc010 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -963,10 +963,12 @@ static void aead_crypt_done(struct device *jrdev, u32 *desc, u32 err,
 	struct caam_drv_private_jr *jrp = dev_get_drvdata(jrdev);
 	struct aead_edesc *edesc;
 	int ecode = 0;
+	bool has_bklog;
 
 	dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
 
 	edesc = rctx->edesc;
+	has_bklog = edesc->bklog;
 
 	if (err)
 		ecode = caam_jr_strstatus(jrdev, err);
@@ -979,7 +981,7 @@ static void aead_crypt_done(struct device *jrdev, u32 *desc, u32 err,
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		aead_request_complete(req, ecode);
 	else
 		crypto_finalize_aead_request(jrp->engine, req, ecode);
@@ -995,10 +997,12 @@ static void skcipher_crypt_done(struct device *jrdev, u32 *desc, u32 err,
 	struct caam_drv_private_jr *jrp = dev_get_drvdata(jrdev);
 	int ivsize = crypto_skcipher_ivsize(skcipher);
 	int ecode = 0;
+	bool has_bklog;
 
 	dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
 
 	edesc = rctx->edesc;
+	has_bklog = edesc->bklog;
 	if (err)
 		ecode = caam_jr_strstatus(jrdev, err);
 
@@ -1028,7 +1032,7 @@ static void skcipher_crypt_done(struct device *jrdev, u32 *desc, u32 err,
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		skcipher_request_complete(req, ecode);
 	else
 		crypto_finalize_skcipher_request(jrp->engine, req, ecode);
@@ -1711,7 +1715,7 @@ static struct skcipher_edesc *skcipher_edesc_alloc(struct skcipher_request *req,
 
 	if (ivsize || mapped_dst_nents > 1)
 		sg_to_sec4_set_last(edesc->sec4_sg + dst_sg_idx +
-				    mapped_dst_nents);
+				    mapped_dst_nents - 1 + !!ivsize);
 
 	if (sec4_sg_bytes) {
 		edesc->sec4_sg_dma = dma_map_single(jrdev, edesc->sec4_sg,
diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c
index 943bc0296267..27ff4a3d037e 100644
--- a/drivers/crypto/caam/caamhash.c
+++ b/drivers/crypto/caam/caamhash.c
@@ -583,10 +583,12 @@ static inline void ahash_done_cpy(struct device *jrdev, u32 *desc, u32 err,
 	struct caam_hash_state *state = ahash_request_ctx(req);
 	struct caam_hash_ctx *ctx = crypto_ahash_ctx(ahash);
 	int ecode = 0;
+	bool has_bklog;
 
 	dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
 
 	edesc = state->edesc;
+	has_bklog = edesc->bklog;
 
 	if (err)
 		ecode = caam_jr_strstatus(jrdev, err);
@@ -603,7 +605,7 @@ static inline void ahash_done_cpy(struct device *jrdev, u32 *desc, u32 err,
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		req->base.complete(&req->base, ecode);
 	else
 		crypto_finalize_hash_request(jrp->engine, req, ecode);
@@ -632,10 +634,12 @@ static inline void ahash_done_switch(struct device *jrdev, u32 *desc, u32 err,
 	struct caam_hash_state *state = ahash_request_ctx(req);
 	int digestsize = crypto_ahash_digestsize(ahash);
 	int ecode = 0;
+	bool has_bklog;
 
 	dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
 
 	edesc = state->edesc;
+	has_bklog = edesc->bklog;
 	if (err)
 		ecode = caam_jr_strstatus(jrdev, err);
 
@@ -663,7 +667,7 @@ static inline void ahash_done_switch(struct device *jrdev, u32 *desc, u32 err,
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		req->base.complete(&req->base, ecode);
 	else
 		crypto_finalize_hash_request(jrp->engine, req, ecode);
diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
index 4fcae37a2e33..2e44d685618f 100644
--- a/drivers/crypto/caam/caampkc.c
+++ b/drivers/crypto/caam/caampkc.c
@@ -121,11 +121,13 @@ static void rsa_pub_done(struct device *dev, u32 *desc, u32 err, void *context)
 	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
 	struct rsa_edesc *edesc;
 	int ecode = 0;
+	bool has_bklog;
 
 	if (err)
 		ecode = caam_jr_strstatus(dev, err);
 
 	edesc = req_ctx->edesc;
+	has_bklog = edesc->bklog;
 
 	rsa_pub_unmap(dev, edesc, req);
 	rsa_io_unmap(dev, edesc, req);
@@ -135,7 +137,7 @@ static void rsa_pub_done(struct device *dev, u32 *desc, u32 err, void *context)
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		akcipher_request_complete(req, ecode);
 	else
 		crypto_finalize_akcipher_request(jrp->engine, req, ecode);
@@ -152,11 +154,13 @@ static void rsa_priv_f_done(struct device *dev, u32 *desc, u32 err,
 	struct caam_rsa_req_ctx *req_ctx = akcipher_request_ctx(req);
 	struct rsa_edesc *edesc;
 	int ecode = 0;
+	bool has_bklog;
 
 	if (err)
 		ecode = caam_jr_strstatus(dev, err);
 
 	edesc = req_ctx->edesc;
+	has_bklog = edesc->bklog;
 
 	switch (key->priv_form) {
 	case FORM1:
@@ -176,7 +180,7 @@ static void rsa_priv_f_done(struct device *dev, u32 *desc, u32 err,
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		akcipher_request_complete(req, ecode);
 	else
 		crypto_finalize_akcipher_request(jrp->engine, req, ecode);
diff --git a/drivers/crypto/ccp/Kconfig b/drivers/crypto/ccp/Kconfig
index e0a8bd15aa74..32268e239bf1 100644
--- a/drivers/crypto/ccp/Kconfig
+++ b/drivers/crypto/ccp/Kconfig
@@ -10,10 +10,9 @@ config CRYPTO_DEV_CCP_DD
 config CRYPTO_DEV_SP_CCP
 	bool "Cryptographic Coprocessor device"
 	default y
-	depends on CRYPTO_DEV_CCP_DD
+	depends on CRYPTO_DEV_CCP_DD && DMADEVICES
 	select HW_RANDOM
 	select DMA_ENGINE
-	select DMADEVICES
 	select CRYPTO_SHA1
 	select CRYPTO_SHA256
 	help
diff --git a/drivers/crypto/chelsio/chcr_algo.c b/drivers/crypto/chelsio/chcr_algo.c
index c29b80dd30d8..5d3000fdd5f4 100644
--- a/drivers/crypto/chelsio/chcr_algo.c
+++ b/drivers/crypto/chelsio/chcr_algo.c
@@ -1757,7 +1757,7 @@ static int chcr_ahash_final(struct ahash_request *req)
 	struct uld_ctx *u_ctx = ULD_CTX(h_ctx(rtfm));
 	struct chcr_context *ctx = h_ctx(rtfm);
 	u8 bs = crypto_tfm_alg_blocksize(crypto_ahash_tfm(rtfm));
-	int error = -EINVAL;
+	int error;
 	unsigned int cpu;
 
 	cpu = get_cpu();
diff --git a/drivers/crypto/chelsio/chcr_crypto.h b/drivers/crypto/chelsio/chcr_crypto.h
index 542bebae001f..1cc522a07aac 100644
--- a/drivers/crypto/chelsio/chcr_crypto.h
+++ b/drivers/crypto/chelsio/chcr_crypto.h
@@ -223,7 +223,7 @@ struct chcr_authenc_ctx {
 
 struct __aead_ctx {
 	struct chcr_gcm_ctx gcm[0];
-	struct chcr_authenc_ctx authenc[0];
+	struct chcr_authenc_ctx authenc[];
 };
 
 struct chcr_aead_ctx {
@@ -235,7 +235,7 @@ struct chcr_aead_ctx {
 	u8 nonce[4];
 	u16 hmac_ctrl;
 	u16 mayverify;
-	struct	__aead_ctx ctx[0];
+	struct	__aead_ctx ctx[];
 };
 
 struct hmac_ctx {
@@ -247,7 +247,7 @@ struct hmac_ctx {
 struct __crypto_ctx {
 	struct hmac_ctx hmacctx[0];
 	struct ablk_ctx ablkctx[0];
-	struct chcr_aead_ctx aeadctx[0];
+	struct chcr_aead_ctx aeadctx[];
 };
 
 struct chcr_context {
@@ -257,7 +257,7 @@ struct chcr_context {
 	unsigned int  ntxq;
 	unsigned int  nrxq;
 	struct completion cbc_aes_aio_done;
-	struct __crypto_ctx crypto_ctx[0];
+	struct __crypto_ctx crypto_ctx[];
 };
 
 struct chcr_hctx_per_wr {
diff --git a/drivers/crypto/hisilicon/Kconfig b/drivers/crypto/hisilicon/Kconfig
index f09c6cf7823e..9c3b3ca815e6 100644
--- a/drivers/crypto/hisilicon/Kconfig
+++ b/drivers/crypto/hisilicon/Kconfig
@@ -29,6 +29,7 @@ config CRYPTO_DEV_HISI_SEC2
 	depends on PCI && PCI_MSI
 	depends on UACCE || UACCE=n
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
+	depends on ACPI
 	help
 	  Support for HiSilicon SEC Engine of version 2 in crypto subsystem.
 	  It provides AES, SM4, and 3DES algorithms with ECB
@@ -42,6 +43,7 @@ config CRYPTO_DEV_HISI_QM
 	depends on ARM64 || COMPILE_TEST
 	depends on PCI && PCI_MSI
 	depends on UACCE || UACCE=n
+	depends on ACPI
 	help
 	  HiSilicon accelerator engines use a common queue management
 	  interface. Specific engine driver may use this module.
@@ -52,6 +54,7 @@ config CRYPTO_DEV_HISI_ZIP
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
 	depends on !CPU_BIG_ENDIAN || COMPILE_TEST
 	depends on UACCE || UACCE=n
+	depends on ACPI
 	select CRYPTO_DEV_HISI_QM
 	help
 	  Support for HiSilicon ZIP Driver
@@ -61,6 +64,7 @@ config CRYPTO_DEV_HISI_HPRE
 	depends on PCI && PCI_MSI
 	depends on UACCE || UACCE=n
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
+	depends on ACPI
 	select CRYPTO_DEV_HISI_QM
 	select CRYPTO_DH
 	select CRYPTO_RSA
diff --git a/drivers/crypto/hisilicon/hpre/hpre.h b/drivers/crypto/hisilicon/hpre/hpre.h
index 03d512ec6336..0a8ba468e2be 100644
--- a/drivers/crypto/hisilicon/hpre/hpre.h
+++ b/drivers/crypto/hisilicon/hpre/hpre.h
@@ -47,7 +47,6 @@ struct hpre_debug {
 struct hpre {
 	struct hisi_qm qm;
 	struct hpre_debug debug;
-	u32 num_vfs;
 	unsigned long status;
 };
 
diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c
index 88be53bf4a38..0d63666ba373 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_main.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_main.c
@@ -59,10 +59,6 @@
 #define HPRE_HAC_ECC2_CNT		0x301a08
 #define HPRE_HAC_INT_STATUS		0x301800
 #define HPRE_HAC_SOURCE_INT		0x301600
-#define MASTER_GLOBAL_CTRL_SHUTDOWN	1
-#define MASTER_TRANS_RETURN_RW		3
-#define HPRE_MASTER_TRANS_RETURN	0x300150
-#define HPRE_MASTER_GLOBAL_CTRL		0x300000
 #define HPRE_CLSTR_ADDR_INTRVL		0x1000
 #define HPRE_CLUSTER_INQURY		0x100
 #define HPRE_CLSTR_ADDR_INQRY_RSLT	0x104
@@ -80,6 +76,13 @@
 #define HPRE_BD_USR_MASK		0x3
 #define HPRE_CLUSTER_CORE_MASK		0xf
 
+#define HPRE_AM_OOO_SHUTDOWN_ENB	0x301044
+#define HPRE_AM_OOO_SHUTDOWN_ENABLE	BIT(0)
+#define HPRE_WR_MSI_PORT		BIT(2)
+
+#define HPRE_CORE_ECC_2BIT_ERR		BIT(1)
+#define HPRE_OOO_ECC_2BIT_ERR		BIT(5)
+
 #define HPRE_VIA_MSI_DSM		1
 
 static struct hisi_qm_list hpre_devices;
@@ -195,6 +198,15 @@ static u32 hpre_pf_q_num = HPRE_PF_DEF_Q_NUM;
 module_param_cb(hpre_pf_q_num, &hpre_pf_q_num_ops, &hpre_pf_q_num, 0444);
 MODULE_PARM_DESC(hpre_pf_q_num, "Number of queues in PF of CS(1-1024)");
 
+static const struct kernel_param_ops vfs_num_ops = {
+	.set = vfs_num_set,
+	.get = param_get_int,
+};
+
+static u32 vfs_num;
+module_param_cb(vfs_num, &vfs_num_ops, &vfs_num, 0444);
+MODULE_PARM_DESC(vfs_num, "Number of VFs to enable(1-63), 0(default)");
+
 struct hisi_qp *hpre_create_qp(void)
 {
 	int node = cpu_to_node(smp_processor_id());
@@ -232,9 +244,8 @@ static int hpre_cfg_by_dsm(struct hisi_qm *qm)
 	return 0;
 }
 
-static int hpre_set_user_domain_and_cache(struct hpre *hpre)
+static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 {
-	struct hisi_qm *qm = &hpre->qm;
 	struct device *dev = &qm->pdev->dev;
 	unsigned long offset;
 	int ret, i;
@@ -330,6 +341,9 @@ static void hpre_hw_error_disable(struct hisi_qm *qm)
 
 static void hpre_hw_error_enable(struct hisi_qm *qm)
 {
+	/* clear HPRE hw error source if having */
+	writel(HPRE_CORE_INT_DISABLE, qm->io_base + HPRE_HAC_SOURCE_INT);
+
 	/* enable hpre hw error interrupts */
 	writel(HPRE_CORE_INT_ENABLE, qm->io_base + HPRE_INT_MASK);
 	writel(HPRE_HAC_RAS_CE_ENABLE, qm->io_base + HPRE_RAS_CE_ENB);
@@ -354,9 +368,7 @@ static u32 hpre_current_qm_read(struct hpre_debugfs_file *file)
 static int hpre_current_qm_write(struct hpre_debugfs_file *file, u32 val)
 {
 	struct hisi_qm *qm = hpre_file_to_qm(file);
-	struct hpre_debug *debug = file->debug;
-	struct hpre *hpre = container_of(debug, struct hpre, debug);
-	u32 num_vfs = hpre->num_vfs;
+	u32 num_vfs = qm->vfs_num;
 	u32 vfq_num, tmp;
 
 
@@ -693,8 +705,6 @@ static void hpre_log_hw_error(struct hisi_qm *qm, u32 err_sts)
 				 err->msg, err->int_msk);
 		err++;
 	}
-
-	writel(err_sts, qm->io_base + HPRE_HAC_SOURCE_INT);
 }
 
 static u32 hpre_get_hw_err_status(struct hisi_qm *qm)
@@ -702,16 +712,39 @@ static u32 hpre_get_hw_err_status(struct hisi_qm *qm)
 	return readl(qm->io_base + HPRE_HAC_INT_STATUS);
 }
 
+static void hpre_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts)
+{
+	writel(err_sts, qm->io_base + HPRE_HAC_SOURCE_INT);
+}
+
+static void hpre_open_axi_master_ooo(struct hisi_qm *qm)
+{
+	u32 value;
+
+	value = readl(qm->io_base + HPRE_AM_OOO_SHUTDOWN_ENB);
+	writel(value & ~HPRE_AM_OOO_SHUTDOWN_ENABLE,
+	       HPRE_ADDR(qm, HPRE_AM_OOO_SHUTDOWN_ENB));
+	writel(value | HPRE_AM_OOO_SHUTDOWN_ENABLE,
+	       HPRE_ADDR(qm, HPRE_AM_OOO_SHUTDOWN_ENB));
+}
+
 static const struct hisi_qm_err_ini hpre_err_ini = {
+	.hw_init		= hpre_set_user_domain_and_cache,
 	.hw_err_enable		= hpre_hw_error_enable,
 	.hw_err_disable		= hpre_hw_error_disable,
 	.get_dev_hw_err_status	= hpre_get_hw_err_status,
+	.clear_dev_hw_err_status = hpre_clear_hw_err_status,
 	.log_dev_hw_err		= hpre_log_hw_error,
+	.open_axi_master_ooo	= hpre_open_axi_master_ooo,
 	.err_info		= {
 		.ce			= QM_BASE_CE,
 		.nfe			= QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT,
 		.fe			= 0,
 		.msi			= QM_DB_RANDOM_INVALID,
+		.ecc_2bits_mask		= HPRE_CORE_ECC_2BIT_ERR |
+					  HPRE_OOO_ECC_2BIT_ERR,
+		.msi_wr_port		= HPRE_WR_MSI_PORT,
+		.acpi_rst		= "HRST",
 	}
 };
 
@@ -722,10 +755,11 @@ static int hpre_pf_probe_init(struct hpre *hpre)
 
 	qm->ctrl_qp_num = HPRE_QUEUE_NUM_V2;
 
-	ret = hpre_set_user_domain_and_cache(hpre);
+	ret = hpre_set_user_domain_and_cache(qm);
 	if (ret)
 		return ret;
 
+	qm->qm_list = &hpre_devices;
 	qm->err_ini = &hpre_err_ini;
 	hisi_qm_dev_err_init(qm);
 
@@ -779,8 +813,18 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		pci_err(pdev, "fail to register algs to crypto!\n");
 		goto err_with_qm_start;
 	}
+
+	if (qm->fun_type == QM_HW_PF && vfs_num) {
+		ret = hisi_qm_sriov_enable(pdev, vfs_num);
+		if (ret < 0)
+			goto err_with_crypto_register;
+	}
+
 	return 0;
 
+err_with_crypto_register:
+	hpre_algs_unregister();
+
 err_with_qm_start:
 	hisi_qm_del_from_list(qm, &hpre_devices);
 	hisi_qm_stop(qm);
@@ -794,107 +838,6 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return ret;
 }
 
-static int hpre_vf_q_assign(struct hpre *hpre, int num_vfs)
-{
-	struct hisi_qm *qm = &hpre->qm;
-	u32 qp_num = qm->qp_num;
-	int q_num, remain_q_num, i;
-	u32 q_base = qp_num;
-	int ret;
-
-	if (!num_vfs)
-		return -EINVAL;
-
-	remain_q_num = qm->ctrl_qp_num - qp_num;
-
-	/* If remaining queues are not enough, return error. */
-	if (remain_q_num < num_vfs)
-		return -EINVAL;
-
-	q_num = remain_q_num / num_vfs;
-	for (i = 1; i <= num_vfs; i++) {
-		if (i == num_vfs)
-			q_num += remain_q_num % num_vfs;
-		ret = hisi_qm_set_vft(qm, i, q_base, (u32)q_num);
-		if (ret)
-			return ret;
-		q_base += q_num;
-	}
-
-	return 0;
-}
-
-static int hpre_clear_vft_config(struct hpre *hpre)
-{
-	struct hisi_qm *qm = &hpre->qm;
-	u32 num_vfs = hpre->num_vfs;
-	int ret;
-	u32 i;
-
-	for (i = 1; i <= num_vfs; i++) {
-		ret = hisi_qm_set_vft(qm, i, 0, 0);
-		if (ret)
-			return ret;
-	}
-	hpre->num_vfs = 0;
-
-	return 0;
-}
-
-static int hpre_sriov_enable(struct pci_dev *pdev, int max_vfs)
-{
-	struct hpre *hpre = pci_get_drvdata(pdev);
-	int pre_existing_vfs, num_vfs, ret;
-
-	pre_existing_vfs = pci_num_vf(pdev);
-	if (pre_existing_vfs) {
-		pci_err(pdev,
-			"Can't enable VF. Please disable pre-enabled VFs!\n");
-		return 0;
-	}
-
-	num_vfs = min_t(int, max_vfs, HPRE_VF_NUM);
-	ret = hpre_vf_q_assign(hpre, num_vfs);
-	if (ret) {
-		pci_err(pdev, "Can't assign queues for VF!\n");
-		return ret;
-	}
-
-	hpre->num_vfs = num_vfs;
-
-	ret = pci_enable_sriov(pdev, num_vfs);
-	if (ret) {
-		pci_err(pdev, "Can't enable VF!\n");
-		hpre_clear_vft_config(hpre);
-		return ret;
-	}
-
-	return num_vfs;
-}
-
-static int hpre_sriov_disable(struct pci_dev *pdev)
-{
-	struct hpre *hpre = pci_get_drvdata(pdev);
-
-	if (pci_vfs_assigned(pdev)) {
-		pci_err(pdev, "Failed to disable VFs while VFs are assigned!\n");
-		return -EPERM;
-	}
-
-	/* remove in hpre_pci_driver will be called to free VF resources */
-	pci_disable_sriov(pdev);
-
-	return hpre_clear_vft_config(hpre);
-}
-
-static int hpre_sriov_configure(struct pci_dev *pdev, int num_vfs)
-{
-	if (num_vfs)
-		return hpre_sriov_enable(pdev, num_vfs);
-	else
-		return hpre_sriov_disable(pdev);
-}
-
 static void hpre_remove(struct pci_dev *pdev)
 {
 	struct hpre *hpre = pci_get_drvdata(pdev);
@@ -903,8 +846,8 @@ static void hpre_remove(struct pci_dev *pdev)
 
 	hpre_algs_unregister();
 	hisi_qm_del_from_list(qm, &hpre_devices);
-	if (qm->fun_type == QM_HW_PF && hpre->num_vfs != 0) {
-		ret = hpre_sriov_disable(pdev);
+	if (qm->fun_type == QM_HW_PF && qm->vfs_num) {
+		ret = hisi_qm_sriov_disable(pdev);
 		if (ret) {
 			pci_err(pdev, "Disable SRIOV fail!\n");
 			return;
@@ -924,6 +867,7 @@ static void hpre_remove(struct pci_dev *pdev)
 
 static const struct pci_error_handlers hpre_err_handler = {
 	.error_detected		= hisi_qm_dev_err_detected,
+	.slot_reset		= hisi_qm_dev_slot_reset,
 };
 
 static struct pci_driver hpre_pci_driver = {
@@ -931,7 +875,7 @@ static struct pci_driver hpre_pci_driver = {
 	.id_table		= hpre_dev_ids,
 	.probe			= hpre_probe,
 	.remove			= hpre_remove,
-	.sriov_configure	= hpre_sriov_configure,
+	.sriov_configure	= hisi_qm_sriov_configure,
 	.err_handler		= &hpre_err_handler,
 };
 
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index f795fb557630..80c552523ac4 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright (c) 2019 HiSilicon Limited. */
 #include <asm/page.h>
+#include <linux/acpi.h>
+#include <linux/aer.h>
 #include <linux/bitmap.h>
 #include <linux/debugfs.h>
 #include <linux/dma-mapping.h>
@@ -53,6 +55,7 @@
 #define QM_SQ_TYPE_SHIFT		8
 
 #define QM_SQ_TYPE_MASK			GENMASK(3, 0)
+#define QM_SQ_TAIL_IDX(sqc)		((le16_to_cpu((sqc)->w11) >> 6) & 0x1)
 
 /* cqc shift */
 #define QM_CQ_HOP_NUM_SHIFT		0
@@ -64,6 +67,7 @@
 
 #define QM_CQE_PHASE(cqe)		(le16_to_cpu((cqe)->w7) & 0x1)
 #define QM_QC_CQE_SIZE			4
+#define QM_CQ_TAIL_IDX(cqc)		((le16_to_cpu((cqc)->w11) >> 6) & 0x1)
 
 /* eqc shift */
 #define QM_EQE_AEQE_SIZE		(2UL << 12)
@@ -122,9 +126,11 @@
 #define QM_DFX_CNT_CLR_CE		0x100118
 
 #define QM_ABNORMAL_INT_SOURCE		0x100000
+#define QM_ABNORMAL_INT_SOURCE_CLR	GENMASK(12, 0)
 #define QM_ABNORMAL_INT_MASK		0x100004
 #define QM_ABNORMAL_INT_MASK_VALUE	0x1fff
 #define QM_ABNORMAL_INT_STATUS		0x100008
+#define QM_ABNORMAL_INT_SET		0x10000c
 #define QM_ABNORMAL_INF00		0x100010
 #define QM_FIFO_OVERFLOW_TYPE		0xc0
 #define QM_FIFO_OVERFLOW_TYPE_SHIFT	6
@@ -140,6 +146,27 @@
 #define QM_RAS_CE_TIMES_PER_IRQ		1
 #define QM_RAS_MSI_INT_SEL		0x1040f4
 
+#define QM_DEV_RESET_FLAG		0
+#define QM_RESET_WAIT_TIMEOUT		400
+#define QM_PEH_VENDOR_ID		0x1000d8
+#define ACC_VENDOR_ID_VALUE		0x5a5a
+#define QM_PEH_DFX_INFO0		0x1000fc
+#define ACC_PEH_SRIOV_CTRL_VF_MSE_SHIFT	3
+#define ACC_PEH_MSI_DISABLE		GENMASK(31, 0)
+#define ACC_MASTER_GLOBAL_CTRL_SHUTDOWN	0x1
+#define ACC_MASTER_TRANS_RETURN_RW	3
+#define ACC_MASTER_TRANS_RETURN		0x300150
+#define ACC_MASTER_GLOBAL_CTRL		0x300000
+#define ACC_AM_CFG_PORT_WR_EN		0x30001c
+#define QM_RAS_NFE_MBIT_DISABLE		~QM_ECC_MBIT
+#define ACC_AM_ROB_ECC_INT_STS		0x300104
+#define ACC_ROB_ECC_ERR_MULTPL		BIT(1)
+
+#define POLL_PERIOD			10
+#define POLL_TIMEOUT			1000
+#define WAIT_PERIOD_US_MAX		200
+#define WAIT_PERIOD_US_MIN		100
+#define MAX_WAIT_COUNTS			1000
 #define QM_CACHE_WB_START		0x204
 #define QM_CACHE_WB_DONE		0x208
 
@@ -1012,10 +1039,18 @@ static void qm_hw_error_init_v2(struct hisi_qm *qm, u32 ce, u32 nfe, u32 fe,
 {
 	u32 irq_enable = ce | nfe | fe | msi;
 	u32 irq_unmask = ~irq_enable;
+	u32 error_status;
 
 	qm->error_mask = ce | nfe | fe;
 	qm->msi_mask = msi;
 
+	/* clear QM hw residual error source */
+	error_status = readl(qm->io_base + QM_ABNORMAL_INT_STATUS);
+	if (error_status) {
+		error_status &= qm->error_mask;
+		writel(error_status, qm->io_base + QM_ABNORMAL_INT_SOURCE);
+	}
+
 	/* configure error type */
 	writel(ce, qm->io_base + QM_RAS_CE_ENABLE);
 	writel(QM_RAS_CE_TIMES_PER_IRQ, qm->io_base + QM_RAS_CE_THRESHOLD);
@@ -1080,6 +1115,9 @@ static pci_ers_result_t qm_hw_error_handle_v2(struct hisi_qm *qm)
 	error_status = qm->error_mask & tmp;
 
 	if (error_status) {
+		if (error_status & QM_ECC_MBIT)
+			qm->err_status.is_qm_ecc_mbit = true;
+
 		qm_log_hw_error(qm, error_status);
 
 		/* clear err sts */
@@ -1328,6 +1366,107 @@ int hisi_qm_start_qp(struct hisi_qp *qp, unsigned long arg)
 }
 EXPORT_SYMBOL_GPL(hisi_qm_start_qp);
 
+static void *qm_ctx_alloc(struct hisi_qm *qm, size_t ctx_size,
+			  dma_addr_t *dma_addr)
+{
+	struct device *dev = &qm->pdev->dev;
+	void *ctx_addr;
+
+	ctx_addr = kzalloc(ctx_size, GFP_KERNEL);
+	if (!ctx_addr)
+		return ERR_PTR(-ENOMEM);
+
+	*dma_addr = dma_map_single(dev, ctx_addr, ctx_size, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dev, *dma_addr)) {
+		dev_err(dev, "DMA mapping error!\n");
+		kfree(ctx_addr);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return ctx_addr;
+}
+
+static void qm_ctx_free(struct hisi_qm *qm, size_t ctx_size,
+			const void *ctx_addr, dma_addr_t *dma_addr)
+{
+	struct device *dev = &qm->pdev->dev;
+
+	dma_unmap_single(dev, *dma_addr, ctx_size, DMA_FROM_DEVICE);
+	kfree(ctx_addr);
+}
+
+static int qm_dump_sqc_raw(struct hisi_qm *qm, dma_addr_t dma_addr, u16 qp_id)
+{
+	return qm_mb(qm, QM_MB_CMD_SQC, dma_addr, qp_id, 1);
+}
+
+static int qm_dump_cqc_raw(struct hisi_qm *qm, dma_addr_t dma_addr, u16 qp_id)
+{
+	return qm_mb(qm, QM_MB_CMD_CQC, dma_addr, qp_id, 1);
+}
+
+/**
+ * Determine whether the queue is cleared by judging the tail pointers of
+ * sq and cq.
+ */
+static int qm_drain_qp(struct hisi_qp *qp)
+{
+	size_t size = sizeof(struct qm_sqc) + sizeof(struct qm_cqc);
+	struct hisi_qm *qm = qp->qm;
+	struct device *dev = &qm->pdev->dev;
+	struct qm_sqc *sqc;
+	struct qm_cqc *cqc;
+	dma_addr_t dma_addr;
+	int ret = 0, i = 0;
+	void *addr;
+
+	/*
+	 * No need to judge if ECC multi-bit error occurs because the
+	 * master OOO will be blocked.
+	 */
+	if (qm->err_status.is_qm_ecc_mbit || qm->err_status.is_dev_ecc_mbit)
+		return 0;
+
+	addr = qm_ctx_alloc(qm, size, &dma_addr);
+	if (IS_ERR(addr)) {
+		dev_err(dev, "Failed to alloc ctx for sqc and cqc!\n");
+		return -ENOMEM;
+	}
+
+	while (++i) {
+		ret = qm_dump_sqc_raw(qm, dma_addr, qp->qp_id);
+		if (ret) {
+			dev_err_ratelimited(dev, "Failed to dump sqc!\n");
+			break;
+		}
+		sqc = addr;
+
+		ret = qm_dump_cqc_raw(qm, (dma_addr + sizeof(struct qm_sqc)),
+				      qp->qp_id);
+		if (ret) {
+			dev_err_ratelimited(dev, "Failed to dump cqc!\n");
+			break;
+		}
+		cqc = addr + sizeof(struct qm_sqc);
+
+		if ((sqc->tail == cqc->tail) &&
+		    (QM_SQ_TAIL_IDX(sqc) == QM_CQ_TAIL_IDX(cqc)))
+			break;
+
+		if (i == MAX_WAIT_COUNTS) {
+			dev_err(dev, "Fail to empty queue %u!\n", qp->qp_id);
+			ret = -EBUSY;
+			break;
+		}
+
+		usleep_range(WAIT_PERIOD_US_MIN, WAIT_PERIOD_US_MAX);
+	}
+
+	qm_ctx_free(qm, size, addr, &dma_addr);
+
+	return ret;
+}
+
 /**
  * hisi_qm_stop_qp() - Stop a qp in qm.
  * @qp: The qp we want to stop.
@@ -1337,20 +1476,20 @@ EXPORT_SYMBOL_GPL(hisi_qm_start_qp);
 int hisi_qm_stop_qp(struct hisi_qp *qp)
 {
 	struct device *dev = &qp->qm->pdev->dev;
-	int i = 0;
+	int ret;
 
 	/* it is stopped */
 	if (test_bit(QP_STOP, &qp->qp_status.flags))
 		return 0;
 
-	while (atomic_read(&qp->qp_status.used)) {
-		i++;
-		msleep(20);
-		if (i == 10) {
-			dev_err(dev, "Cannot drain out data for stopping, Force to stop!\n");
-			return 0;
-		}
-	}
+	ret = qm_drain_qp(qp);
+	if (ret)
+		dev_err(dev, "Failed to drain out data for stopping!\n");
+
+	if (qp->qm->wq)
+		flush_workqueue(qp->qm->wq);
+	else
+		flush_work(&qp->qm->work);
 
 	set_bit(QP_STOP, &qp->qp_status.flags);
 
@@ -1781,12 +1920,6 @@ int hisi_qm_get_vft(struct hisi_qm *qm, u32 *base, u32 *number)
 EXPORT_SYMBOL_GPL(hisi_qm_get_vft);
 
 /**
- * hisi_qm_set_vft() - Set "virtual function table" for a qm.
- * @fun_num: Number of operated function.
- * @qm: The qm in which to set vft, alway in a PF.
- * @base: The base number of queue in vft.
- * @number: The number of queues in vft. 0 means invalid vft.
- *
  * This function is alway called in PF driver, it is used to assign queues
  * among PF and VFs.
  *
@@ -1794,7 +1927,7 @@ EXPORT_SYMBOL_GPL(hisi_qm_get_vft);
  * Assign queues A~B to VF: hisi_qm_set_vft(qm, 2, A, B - A + 1)
  * (VF function number 0x2)
  */
-int hisi_qm_set_vft(struct hisi_qm *qm, u32 fun_num, u32 base,
+static int hisi_qm_set_vft(struct hisi_qm *qm, u32 fun_num, u32 base,
 		    u32 number)
 {
 	u32 max_q_num = qm->ctrl_qp_num;
@@ -1805,7 +1938,6 @@ int hisi_qm_set_vft(struct hisi_qm *qm, u32 fun_num, u32 base,
 
 	return qm_set_sqc_cqc_vft(qm, fun_num, base, number);
 }
-EXPORT_SYMBOL_GPL(hisi_qm_set_vft);
 
 static void qm_init_eq_aeq_status(struct hisi_qm *qm)
 {
@@ -1978,6 +2110,52 @@ int hisi_qm_start(struct hisi_qm *qm)
 }
 EXPORT_SYMBOL_GPL(hisi_qm_start);
 
+static int qm_restart(struct hisi_qm *qm)
+{
+	struct device *dev = &qm->pdev->dev;
+	struct hisi_qp *qp;
+	int ret, i;
+
+	ret = hisi_qm_start(qm);
+	if (ret < 0)
+		return ret;
+
+	write_lock(&qm->qps_lock);
+	for (i = 0; i < qm->qp_num; i++) {
+		qp = qm->qp_array[i];
+		if (qp) {
+			ret = hisi_qm_start_qp(qp, 0);
+			if (ret < 0) {
+				dev_err(dev, "Failed to start qp%d!\n", i);
+
+				write_unlock(&qm->qps_lock);
+				return ret;
+			}
+		}
+	}
+	write_unlock(&qm->qps_lock);
+
+	return 0;
+}
+
+/**
+ * This function clears all queues memory in a qm. Reset of accelerator can
+ * use this to clear queues.
+ */
+static void qm_clear_queues(struct hisi_qm *qm)
+{
+	struct hisi_qp *qp;
+	int i;
+
+	for (i = 0; i < qm->qp_num; i++) {
+		qp = qm->qp_array[i];
+		if (qp)
+			memset(qp->qdma.va, 0, qp->qdma.size);
+	}
+
+	memset(qm->qdma.va, 0, qm->qdma.size);
+}
+
 /**
  * hisi_qm_stop() - Stop a qm.
  * @qm: The qm which will be stopped.
@@ -2021,6 +2199,8 @@ int hisi_qm_stop(struct hisi_qm *qm)
 			dev_err(dev, "Failed to set vft!\n");
 	}
 
+	qm_clear_queues(qm);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(hisi_qm_stop);
@@ -2299,6 +2479,133 @@ int hisi_qm_alloc_qps_node(struct hisi_qm_list *qm_list, int qp_num,
 }
 EXPORT_SYMBOL_GPL(hisi_qm_alloc_qps_node);
 
+static int qm_vf_q_assign(struct hisi_qm *qm, u32 num_vfs)
+{
+	u32 remain_q_num, q_num, i, j;
+	u32 q_base = qm->qp_num;
+	int ret;
+
+	if (!num_vfs)
+		return -EINVAL;
+
+	remain_q_num = qm->ctrl_qp_num - qm->qp_num;
+
+	/* If remain queues not enough, return error. */
+	if (qm->ctrl_qp_num < qm->qp_num || remain_q_num < num_vfs)
+		return -EINVAL;
+
+	q_num = remain_q_num / num_vfs;
+	for (i = 1; i <= num_vfs; i++) {
+		if (i == num_vfs)
+			q_num += remain_q_num % num_vfs;
+		ret = hisi_qm_set_vft(qm, i, q_base, q_num);
+		if (ret) {
+			for (j = i; j > 0; j--)
+				hisi_qm_set_vft(qm, j, 0, 0);
+			return ret;
+		}
+		q_base += q_num;
+	}
+
+	return 0;
+}
+
+static int qm_clear_vft_config(struct hisi_qm *qm)
+{
+	int ret;
+	u32 i;
+
+	for (i = 1; i <= qm->vfs_num; i++) {
+		ret = hisi_qm_set_vft(qm, i, 0, 0);
+		if (ret)
+			return ret;
+	}
+	qm->vfs_num = 0;
+
+	return 0;
+}
+
+/**
+ * hisi_qm_sriov_enable() - enable virtual functions
+ * @pdev: the PCIe device
+ * @max_vfs: the number of virtual functions to enable
+ *
+ * Returns the number of enabled VFs. If there are VFs enabled already or
+ * max_vfs is more than the total number of device can be enabled, returns
+ * failure.
+ */
+int hisi_qm_sriov_enable(struct pci_dev *pdev, int max_vfs)
+{
+	struct hisi_qm *qm = pci_get_drvdata(pdev);
+	int pre_existing_vfs, num_vfs, total_vfs, ret;
+
+	total_vfs = pci_sriov_get_totalvfs(pdev);
+	pre_existing_vfs = pci_num_vf(pdev);
+	if (pre_existing_vfs) {
+		pci_err(pdev, "%d VFs already enabled. Please disable pre-enabled VFs!\n",
+			pre_existing_vfs);
+		return 0;
+	}
+
+	num_vfs = min_t(int, max_vfs, total_vfs);
+	ret = qm_vf_q_assign(qm, num_vfs);
+	if (ret) {
+		pci_err(pdev, "Can't assign queues for VF!\n");
+		return ret;
+	}
+
+	qm->vfs_num = num_vfs;
+
+	ret = pci_enable_sriov(pdev, num_vfs);
+	if (ret) {
+		pci_err(pdev, "Can't enable VF!\n");
+		qm_clear_vft_config(qm);
+		return ret;
+	}
+
+	pci_info(pdev, "VF enabled, vfs_num(=%d)!\n", num_vfs);
+
+	return num_vfs;
+}
+EXPORT_SYMBOL_GPL(hisi_qm_sriov_enable);
+
+/**
+ * hisi_qm_sriov_disable - disable virtual functions
+ * @pdev: the PCI device
+ *
+ * Return failure if there are VFs assigned already.
+ */
+int hisi_qm_sriov_disable(struct pci_dev *pdev)
+{
+	struct hisi_qm *qm = pci_get_drvdata(pdev);
+
+	if (pci_vfs_assigned(pdev)) {
+		pci_err(pdev, "Failed to disable VFs as VFs are assigned!\n");
+		return -EPERM;
+	}
+
+	/* remove in hpre_pci_driver will be called to free VF resources */
+	pci_disable_sriov(pdev);
+	return qm_clear_vft_config(qm);
+}
+EXPORT_SYMBOL_GPL(hisi_qm_sriov_disable);
+
+/**
+ * hisi_qm_sriov_configure - configure the number of VFs
+ * @pdev: The PCI device
+ * @num_vfs: The number of VFs need enabled
+ *
+ * Enable SR-IOV according to num_vfs, 0 means disable.
+ */
+int hisi_qm_sriov_configure(struct pci_dev *pdev, int num_vfs)
+{
+	if (num_vfs == 0)
+		return hisi_qm_sriov_disable(pdev);
+	else
+		return hisi_qm_sriov_enable(pdev, num_vfs);
+}
+EXPORT_SYMBOL_GPL(hisi_qm_sriov_configure);
+
 static pci_ers_result_t qm_dev_err_handle(struct hisi_qm *qm)
 {
 	u32 err_sts;
@@ -2311,6 +2618,9 @@ static pci_ers_result_t qm_dev_err_handle(struct hisi_qm *qm)
 	/* get device hardware error status */
 	err_sts = qm->err_ini->get_dev_hw_err_status(qm);
 	if (err_sts) {
+		if (err_sts & qm->err_ini->err_info.ecc_2bits_mask)
+			qm->err_status.is_dev_ecc_mbit = true;
+
 		if (!qm->err_ini->log_dev_hw_err) {
 			dev_err(&qm->pdev->dev, "Device doesn't support log hw error!\n");
 			return PCI_ERS_RESULT_NEED_RESET;
@@ -2361,6 +2671,465 @@ pci_ers_result_t hisi_qm_dev_err_detected(struct pci_dev *pdev,
 }
 EXPORT_SYMBOL_GPL(hisi_qm_dev_err_detected);
 
+static int qm_check_req_recv(struct hisi_qm *qm)
+{
+	struct pci_dev *pdev = qm->pdev;
+	int ret;
+	u32 val;
+
+	writel(ACC_VENDOR_ID_VALUE, qm->io_base + QM_PEH_VENDOR_ID);
+	ret = readl_relaxed_poll_timeout(qm->io_base + QM_PEH_VENDOR_ID, val,
+					 (val == ACC_VENDOR_ID_VALUE),
+					 POLL_PERIOD, POLL_TIMEOUT);
+	if (ret) {
+		dev_err(&pdev->dev, "Fails to read QM reg!\n");
+		return ret;
+	}
+
+	writel(PCI_VENDOR_ID_HUAWEI, qm->io_base + QM_PEH_VENDOR_ID);
+	ret = readl_relaxed_poll_timeout(qm->io_base + QM_PEH_VENDOR_ID, val,
+					 (val == PCI_VENDOR_ID_HUAWEI),
+					 POLL_PERIOD, POLL_TIMEOUT);
+	if (ret)
+		dev_err(&pdev->dev, "Fails to read QM reg in the second time!\n");
+
+	return ret;
+}
+
+static int qm_set_pf_mse(struct hisi_qm *qm, bool set)
+{
+	struct pci_dev *pdev = qm->pdev;
+	u16 cmd;
+	int i;
+
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	if (set)
+		cmd |= PCI_COMMAND_MEMORY;
+	else
+		cmd &= ~PCI_COMMAND_MEMORY;
+
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
+	for (i = 0; i < MAX_WAIT_COUNTS; i++) {
+		pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+		if (set == ((cmd & PCI_COMMAND_MEMORY) >> 1))
+			return 0;
+
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int qm_set_vf_mse(struct hisi_qm *qm, bool set)
+{
+	struct pci_dev *pdev = qm->pdev;
+	u16 sriov_ctrl;
+	int pos;
+	int i;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+	pci_read_config_word(pdev, pos + PCI_SRIOV_CTRL, &sriov_ctrl);
+	if (set)
+		sriov_ctrl |= PCI_SRIOV_CTRL_MSE;
+	else
+		sriov_ctrl &= ~PCI_SRIOV_CTRL_MSE;
+	pci_write_config_word(pdev, pos + PCI_SRIOV_CTRL, sriov_ctrl);
+
+	for (i = 0; i < MAX_WAIT_COUNTS; i++) {
+		pci_read_config_word(pdev, pos + PCI_SRIOV_CTRL, &sriov_ctrl);
+		if (set == (sriov_ctrl & PCI_SRIOV_CTRL_MSE) >>
+		    ACC_PEH_SRIOV_CTRL_VF_MSE_SHIFT)
+			return 0;
+
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int qm_set_msi(struct hisi_qm *qm, bool set)
+{
+	struct pci_dev *pdev = qm->pdev;
+
+	if (set) {
+		pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_MASK_64,
+				       0);
+	} else {
+		pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_MASK_64,
+				       ACC_PEH_MSI_DISABLE);
+		if (qm->err_status.is_qm_ecc_mbit ||
+		    qm->err_status.is_dev_ecc_mbit)
+			return 0;
+
+		mdelay(1);
+		if (readl(qm->io_base + QM_PEH_DFX_INFO0))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int qm_vf_reset_prepare(struct hisi_qm *qm)
+{
+	struct hisi_qm_list *qm_list = qm->qm_list;
+	struct pci_dev *pdev = qm->pdev;
+	struct pci_dev *virtfn;
+	struct hisi_qm *vf_qm;
+	int ret = 0;
+
+	mutex_lock(&qm_list->lock);
+	list_for_each_entry(vf_qm, &qm_list->list, list) {
+		virtfn = vf_qm->pdev;
+		if (virtfn == pdev)
+			continue;
+
+		if (pci_physfn(virtfn) == pdev) {
+			ret = hisi_qm_stop(vf_qm);
+			if (ret)
+				goto stop_fail;
+		}
+	}
+
+stop_fail:
+	mutex_unlock(&qm_list->lock);
+	return ret;
+}
+
+static int qm_reset_prepare_ready(struct hisi_qm *qm)
+{
+	struct pci_dev *pdev = qm->pdev;
+	struct hisi_qm *pf_qm = pci_get_drvdata(pci_physfn(pdev));
+	int delay = 0;
+
+	/* All reset requests need to be queued for processing */
+	while (test_and_set_bit(QM_DEV_RESET_FLAG, &pf_qm->reset_flag)) {
+		msleep(++delay);
+		if (delay > QM_RESET_WAIT_TIMEOUT)
+			return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int qm_controller_reset_prepare(struct hisi_qm *qm)
+{
+	struct pci_dev *pdev = qm->pdev;
+	int ret;
+
+	ret = qm_reset_prepare_ready(qm);
+	if (ret) {
+		pci_err(pdev, "Controller reset not ready!\n");
+		return ret;
+	}
+
+	if (qm->vfs_num) {
+		ret = qm_vf_reset_prepare(qm);
+		if (ret) {
+			pci_err(pdev, "Fails to stop VFs!\n");
+			return ret;
+		}
+	}
+
+	ret = hisi_qm_stop(qm);
+	if (ret) {
+		pci_err(pdev, "Fails to stop QM!\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm)
+{
+	u32 nfe_enb = 0;
+
+	if (!qm->err_status.is_dev_ecc_mbit &&
+	    qm->err_status.is_qm_ecc_mbit &&
+	    qm->err_ini->close_axi_master_ooo) {
+
+		qm->err_ini->close_axi_master_ooo(qm);
+
+	} else if (qm->err_status.is_dev_ecc_mbit &&
+		   !qm->err_status.is_qm_ecc_mbit &&
+		   !qm->err_ini->close_axi_master_ooo) {
+
+		nfe_enb = readl(qm->io_base + QM_RAS_NFE_ENABLE);
+		writel(nfe_enb & QM_RAS_NFE_MBIT_DISABLE,
+		       qm->io_base + QM_RAS_NFE_ENABLE);
+		writel(QM_ECC_MBIT, qm->io_base + QM_ABNORMAL_INT_SET);
+	}
+}
+
+static int qm_soft_reset(struct hisi_qm *qm)
+{
+	struct pci_dev *pdev = qm->pdev;
+	int ret;
+	u32 val;
+
+	/* Ensure all doorbells and mailboxes received by QM */
+	ret = qm_check_req_recv(qm);
+	if (ret)
+		return ret;
+
+	if (qm->vfs_num) {
+		ret = qm_set_vf_mse(qm, false);
+		if (ret) {
+			pci_err(pdev, "Fails to disable vf MSE bit.\n");
+			return ret;
+		}
+	}
+
+	ret = qm_set_msi(qm, false);
+	if (ret) {
+		pci_err(pdev, "Fails to disable PEH MSI bit.\n");
+		return ret;
+	}
+
+	qm_dev_ecc_mbit_handle(qm);
+
+	/* OOO register set and check */
+	writel(ACC_MASTER_GLOBAL_CTRL_SHUTDOWN,
+	       qm->io_base + ACC_MASTER_GLOBAL_CTRL);
+
+	/* If bus lock, reset chip */
+	ret = readl_relaxed_poll_timeout(qm->io_base + ACC_MASTER_TRANS_RETURN,
+					 val,
+					 (val == ACC_MASTER_TRANS_RETURN_RW),
+					 POLL_PERIOD, POLL_TIMEOUT);
+	if (ret) {
+		pci_emerg(pdev, "Bus lock! Please reset system.\n");
+		return ret;
+	}
+
+	ret = qm_set_pf_mse(qm, false);
+	if (ret) {
+		pci_err(pdev, "Fails to disable pf MSE bit.\n");
+		return ret;
+	}
+
+	/* The reset related sub-control registers are not in PCI BAR */
+	if (ACPI_HANDLE(&pdev->dev)) {
+		unsigned long long value = 0;
+		acpi_status s;
+
+		s = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev),
+					  qm->err_ini->err_info.acpi_rst,
+					  NULL, &value);
+		if (ACPI_FAILURE(s)) {
+			pci_err(pdev, "NO controller reset method!\n");
+			return -EIO;
+		}
+
+		if (value) {
+			pci_err(pdev, "Reset step %llu failed!\n", value);
+			return -EIO;
+		}
+	} else {
+		pci_err(pdev, "No reset method!\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int qm_vf_reset_done(struct hisi_qm *qm)
+{
+	struct hisi_qm_list *qm_list = qm->qm_list;
+	struct pci_dev *pdev = qm->pdev;
+	struct pci_dev *virtfn;
+	struct hisi_qm *vf_qm;
+	int ret = 0;
+
+	mutex_lock(&qm_list->lock);
+	list_for_each_entry(vf_qm, &qm_list->list, list) {
+		virtfn = vf_qm->pdev;
+		if (virtfn == pdev)
+			continue;
+
+		if (pci_physfn(virtfn) == pdev) {
+			ret = qm_restart(vf_qm);
+			if (ret)
+				goto restart_fail;
+		}
+	}
+
+restart_fail:
+	mutex_unlock(&qm_list->lock);
+	return ret;
+}
+
+static int qm_get_dev_err_status(struct hisi_qm *qm)
+{
+
+	return(qm->err_ini->get_dev_hw_err_status(qm) &
+	       qm->err_ini->err_info.ecc_2bits_mask);
+}
+
+static int qm_dev_hw_init(struct hisi_qm *qm)
+{
+	return qm->err_ini->hw_init(qm);
+}
+
+static void qm_restart_prepare(struct hisi_qm *qm)
+{
+	u32 value;
+
+	if (!qm->err_status.is_qm_ecc_mbit &&
+	    !qm->err_status.is_dev_ecc_mbit)
+		return;
+
+	/* temporarily close the OOO port used for PEH to write out MSI */
+	value = readl(qm->io_base + ACC_AM_CFG_PORT_WR_EN);
+	writel(value & ~qm->err_ini->err_info.msi_wr_port,
+	       qm->io_base + ACC_AM_CFG_PORT_WR_EN);
+
+	/* clear dev ecc 2bit error source if having */
+	value = qm_get_dev_err_status(qm);
+	if (value && qm->err_ini->clear_dev_hw_err_status)
+		qm->err_ini->clear_dev_hw_err_status(qm, value);
+
+	/* clear QM ecc mbit error source */
+	writel(QM_ECC_MBIT, qm->io_base + QM_ABNORMAL_INT_SOURCE);
+
+	/* clear AM Reorder Buffer ecc mbit source */
+	writel(ACC_ROB_ECC_ERR_MULTPL, qm->io_base + ACC_AM_ROB_ECC_INT_STS);
+
+	if (qm->err_ini->open_axi_master_ooo)
+		qm->err_ini->open_axi_master_ooo(qm);
+}
+
+static void qm_restart_done(struct hisi_qm *qm)
+{
+	u32 value;
+
+	if (!qm->err_status.is_qm_ecc_mbit &&
+	    !qm->err_status.is_dev_ecc_mbit)
+		return;
+
+	/* open the OOO port for PEH to write out MSI */
+	value = readl(qm->io_base + ACC_AM_CFG_PORT_WR_EN);
+	value |= qm->err_ini->err_info.msi_wr_port;
+	writel(value, qm->io_base + ACC_AM_CFG_PORT_WR_EN);
+
+	qm->err_status.is_qm_ecc_mbit = false;
+	qm->err_status.is_dev_ecc_mbit = false;
+}
+
+static int qm_controller_reset_done(struct hisi_qm *qm)
+{
+	struct pci_dev *pdev = qm->pdev;
+	int ret;
+
+	ret = qm_set_msi(qm, true);
+	if (ret) {
+		pci_err(pdev, "Fails to enable PEH MSI bit!\n");
+		return ret;
+	}
+
+	ret = qm_set_pf_mse(qm, true);
+	if (ret) {
+		pci_err(pdev, "Fails to enable pf MSE bit!\n");
+		return ret;
+	}
+
+	if (qm->vfs_num) {
+		ret = qm_set_vf_mse(qm, true);
+		if (ret) {
+			pci_err(pdev, "Fails to enable vf MSE bit!\n");
+			return ret;
+		}
+	}
+
+	ret = qm_dev_hw_init(qm);
+	if (ret) {
+		pci_err(pdev, "Failed to init device\n");
+		return ret;
+	}
+
+	qm_restart_prepare(qm);
+
+	ret = qm_restart(qm);
+	if (ret) {
+		pci_err(pdev, "Failed to start QM!\n");
+		return ret;
+	}
+
+	if (qm->vfs_num) {
+		ret = qm_vf_q_assign(qm, qm->vfs_num);
+		if (ret) {
+			pci_err(pdev, "Failed to assign queue!\n");
+			return ret;
+		}
+	}
+
+	ret = qm_vf_reset_done(qm);
+	if (ret) {
+		pci_err(pdev, "Failed to start VFs!\n");
+		return -EPERM;
+	}
+
+	hisi_qm_dev_err_init(qm);
+	qm_restart_done(qm);
+
+	clear_bit(QM_DEV_RESET_FLAG, &qm->reset_flag);
+
+	return 0;
+}
+
+int qm_controller_reset(struct hisi_qm *qm)
+{
+	struct pci_dev *pdev = qm->pdev;
+	int ret;
+
+	pci_info(pdev, "Controller resetting...\n");
+
+	ret = qm_controller_reset_prepare(qm);
+	if (ret)
+		return ret;
+
+	ret = qm_soft_reset(qm);
+	if (ret) {
+		pci_err(pdev, "Controller reset failed (%d)\n", ret);
+		return ret;
+	}
+
+	ret = qm_controller_reset_done(qm);
+	if (ret)
+		return ret;
+
+	pci_info(pdev, "Controller reset complete\n");
+
+	return 0;
+}
+
+/**
+ * hisi_qm_dev_slot_reset() - slot reset
+ * @pdev: the PCIe device
+ *
+ * This function offers QM relate PCIe device reset interface. Drivers which
+ * use QM can use this function as slot_reset in its struct pci_error_handlers.
+ */
+pci_ers_result_t hisi_qm_dev_slot_reset(struct pci_dev *pdev)
+{
+	struct hisi_qm *qm = pci_get_drvdata(pdev);
+	int ret;
+
+	if (pdev->is_virtfn)
+		return PCI_ERS_RESULT_RECOVERED;
+
+	pci_aer_clear_nonfatal_status(pdev);
+
+	/* reset pcie device controller */
+	ret = qm_controller_reset(qm);
+	if (ret) {
+		pci_err(pdev, "Controller reset failed (%d)\n", ret);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+EXPORT_SYMBOL_GPL(hisi_qm_dev_slot_reset);
+
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Zhou Wang <wangzhou1@hisilicon.com>");
 MODULE_DESCRIPTION("HiSilicon Accelerator queue manager driver");
diff --git a/drivers/crypto/hisilicon/qm.h b/drivers/crypto/hisilicon/qm.h
index ec5b6f48db6c..9d17167840f8 100644
--- a/drivers/crypto/hisilicon/qm.h
+++ b/drivers/crypto/hisilicon/qm.h
@@ -8,6 +8,8 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 
+#define QM_MAX_VFS_NUM_V2		63
+
 /* qm user domain */
 #define QM_ARUSER_M_CFG_1		0x100088
 #define AXUSER_SNOOP_ENABLE		BIT(30)
@@ -131,16 +133,28 @@ struct hisi_qm_status {
 struct hisi_qm;
 
 struct hisi_qm_err_info {
+	char *acpi_rst;
+	u32 msi_wr_port;
+	u32 ecc_2bits_mask;
 	u32 ce;
 	u32 nfe;
 	u32 fe;
 	u32 msi;
 };
 
+struct hisi_qm_err_status {
+	u32 is_qm_ecc_mbit;
+	u32 is_dev_ecc_mbit;
+};
+
 struct hisi_qm_err_ini {
+	int (*hw_init)(struct hisi_qm *qm);
 	void (*hw_err_enable)(struct hisi_qm *qm);
 	void (*hw_err_disable)(struct hisi_qm *qm);
 	u32 (*get_dev_hw_err_status)(struct hisi_qm *qm);
+	void (*clear_dev_hw_err_status)(struct hisi_qm *qm, u32 err_sts);
+	void (*open_axi_master_ooo)(struct hisi_qm *qm);
+	void (*close_axi_master_ooo)(struct hisi_qm *qm);
 	void (*log_dev_hw_err)(struct hisi_qm *qm, u32 err_sts);
 	struct hisi_qm_err_info err_info;
 };
@@ -161,7 +175,9 @@ struct hisi_qm {
 	u32 qp_num;
 	u32 qp_in_used;
 	u32 ctrl_qp_num;
+	u32 vfs_num;
 	struct list_head list;
+	struct hisi_qm_list *qm_list;
 
 	struct qm_dma qdma;
 	struct qm_sqc *sqc;
@@ -175,6 +191,8 @@ struct hisi_qm {
 
 	struct hisi_qm_status status;
 	const struct hisi_qm_err_ini *err_ini;
+	struct hisi_qm_err_status err_status;
+	unsigned long reset_flag;
 
 	rwlock_t qps_lock;
 	unsigned long *qp_bitmap;
@@ -234,6 +252,24 @@ struct hisi_qp {
 	struct uacce_queue *uacce_q;
 };
 
+static inline int vfs_num_set(const char *val, const struct kernel_param *kp)
+{
+	u32 n;
+	int ret;
+
+	if (!val)
+		return -EINVAL;
+
+	ret = kstrtou32(val, 10, &n);
+	if (ret < 0)
+		return ret;
+
+	if (n > QM_MAX_VFS_NUM_V2)
+		return -EINVAL;
+
+	return param_set_int(val, kp);
+}
+
 static inline void hisi_qm_init_list(struct hisi_qm_list *qm_list)
 {
 	INIT_LIST_HEAD(&qm_list->list);
@@ -267,14 +303,17 @@ void hisi_qm_release_qp(struct hisi_qp *qp);
 int hisi_qp_send(struct hisi_qp *qp, const void *msg);
 int hisi_qm_get_free_qp_num(struct hisi_qm *qm);
 int hisi_qm_get_vft(struct hisi_qm *qm, u32 *base, u32 *number);
-int hisi_qm_set_vft(struct hisi_qm *qm, u32 fun_num, u32 base, u32 number);
 int hisi_qm_debug_init(struct hisi_qm *qm);
 enum qm_hw_ver hisi_qm_get_hw_version(struct pci_dev *pdev);
 void hisi_qm_debug_regs_clear(struct hisi_qm *qm);
+int hisi_qm_sriov_enable(struct pci_dev *pdev, int max_vfs);
+int hisi_qm_sriov_disable(struct pci_dev *pdev);
+int hisi_qm_sriov_configure(struct pci_dev *pdev, int num_vfs);
 void hisi_qm_dev_err_init(struct hisi_qm *qm);
 void hisi_qm_dev_err_uninit(struct hisi_qm *qm);
 pci_ers_result_t hisi_qm_dev_err_detected(struct pci_dev *pdev,
 					  pci_channel_state_t state);
+pci_ers_result_t hisi_qm_dev_slot_reset(struct pci_dev *pdev);
 
 struct hisi_acc_sgl_pool;
 struct hisi_acc_hw_sgl *hisi_acc_sg_buf_map_to_hw_sgl(struct device *dev,
diff --git a/drivers/crypto/hisilicon/sec2/sec.h b/drivers/crypto/hisilicon/sec2/sec.h
index 3598fa17beb2..2326634a1d71 100644
--- a/drivers/crypto/hisilicon/sec2/sec.h
+++ b/drivers/crypto/hisilicon/sec2/sec.h
@@ -172,7 +172,6 @@ struct sec_dev {
 	struct sec_debug debug;
 	u32 ctx_q_num;
 	bool iommu_used;
-	u32 num_vfs;
 	unsigned long status;
 };
 
diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index 1f54ebe164b6..07a5f4eb96ff 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -207,6 +207,15 @@ static u32 ctx_q_num = SEC_CTX_Q_NUM_DEF;
 module_param_cb(ctx_q_num, &sec_ctx_q_num_ops, &ctx_q_num, 0444);
 MODULE_PARM_DESC(ctx_q_num, "Queue num in ctx (24 default, 2, 4, ..., 32)");
 
+static const struct kernel_param_ops vfs_num_ops = {
+	.set = vfs_num_set,
+	.get = param_get_int,
+};
+
+static u32 vfs_num;
+module_param_cb(vfs_num, &vfs_num_ops, &vfs_num, 0444);
+MODULE_PARM_DESC(vfs_num, "Number of VFs to enable(1-63), 0(default)");
+
 void sec_destroy_qps(struct hisi_qp **qps, int qp_num)
 {
 	hisi_qm_free_qps(qps, qp_num);
@@ -240,9 +249,8 @@ static const struct pci_device_id sec_dev_ids[] = {
 };
 MODULE_DEVICE_TABLE(pci, sec_dev_ids);
 
-static u8 sec_get_endian(struct sec_dev *sec)
+static u8 sec_get_endian(struct hisi_qm *qm)
 {
-	struct hisi_qm *qm = &sec->qm;
 	u32 reg;
 
 	/*
@@ -270,9 +278,8 @@ static u8 sec_get_endian(struct sec_dev *sec)
 		return SEC_64BE;
 }
 
-static int sec_engine_init(struct sec_dev *sec)
+static int sec_engine_init(struct hisi_qm *qm)
 {
-	struct hisi_qm *qm = &sec->qm;
 	int ret;
 	u32 reg;
 
@@ -315,7 +322,7 @@ static int sec_engine_init(struct sec_dev *sec)
 
 	/* config endian */
 	reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG));
-	reg |= sec_get_endian(sec);
+	reg |= sec_get_endian(qm);
 	writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG));
 
 	/* Enable sm4 xts mode multiple iv */
@@ -325,10 +332,8 @@ static int sec_engine_init(struct sec_dev *sec)
 	return 0;
 }
 
-static int sec_set_user_domain_and_cache(struct sec_dev *sec)
+static int sec_set_user_domain_and_cache(struct hisi_qm *qm)
 {
-	struct hisi_qm *qm = &sec->qm;
-
 	/* qm user domain */
 	writel(AXUSER_BASE, qm->io_base + QM_ARUSER_M_CFG_1);
 	writel(ARUSER_M_CFG_ENABLE, qm->io_base + QM_ARUSER_M_CFG_ENABLE);
@@ -349,7 +354,7 @@ static int sec_set_user_domain_and_cache(struct sec_dev *sec)
 	       CQC_CACHE_WB_ENABLE | FIELD_PREP(SQC_CACHE_WB_THRD, 1) |
 	       FIELD_PREP(CQC_CACHE_WB_THRD, 1), qm->io_base + QM_CACHE_CTL);
 
-	return sec_engine_init(sec);
+	return sec_engine_init(qm);
 }
 
 /* sec_debug_regs_clear() - clear the sec debug regs */
@@ -424,23 +429,22 @@ static u32 sec_current_qm_read(struct sec_debug_file *file)
 static int sec_current_qm_write(struct sec_debug_file *file, u32 val)
 {
 	struct hisi_qm *qm = file->qm;
-	struct sec_dev *sec = container_of(qm, struct sec_dev, qm);
 	u32 vfq_num;
 	u32 tmp;
 
-	if (val > sec->num_vfs)
+	if (val > qm->vfs_num)
 		return -EINVAL;
 
 	/* According PF or VF Dev ID to calculation curr_qm_qp_num and store */
 	if (!val) {
 		qm->debug.curr_qm_qp_num = qm->qp_num;
 	} else {
-		vfq_num = (qm->ctrl_qp_num - qm->qp_num) / sec->num_vfs;
+		vfq_num = (qm->ctrl_qp_num - qm->qp_num) / qm->vfs_num;
 
-		if (val == sec->num_vfs)
+		if (val == qm->vfs_num)
 			qm->debug.curr_qm_qp_num =
 				qm->ctrl_qp_num - qm->qp_num -
-				(sec->num_vfs - 1) * vfq_num;
+				(qm->vfs_num - 1) * vfq_num;
 		else
 			qm->debug.curr_qm_qp_num = vfq_num;
 	}
@@ -675,8 +679,6 @@ static void sec_log_hw_error(struct hisi_qm *qm, u32 err_sts)
 		}
 		errs++;
 	}
-
-	writel(err_sts, qm->io_base + SEC_CORE_INT_SOURCE);
 }
 
 static u32 sec_get_hw_err_status(struct hisi_qm *qm)
@@ -684,17 +686,37 @@ static u32 sec_get_hw_err_status(struct hisi_qm *qm)
 	return readl(qm->io_base + SEC_CORE_INT_STATUS);
 }
 
+static void sec_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts)
+{
+	writel(err_sts, qm->io_base + SEC_CORE_INT_SOURCE);
+}
+
+static void sec_open_axi_master_ooo(struct hisi_qm *qm)
+{
+	u32 val;
+
+	val = readl(SEC_ADDR(qm, SEC_CONTROL_REG));
+	writel(val & SEC_AXI_SHUTDOWN_DISABLE, SEC_ADDR(qm, SEC_CONTROL_REG));
+	writel(val | SEC_AXI_SHUTDOWN_ENABLE, SEC_ADDR(qm, SEC_CONTROL_REG));
+}
+
 static const struct hisi_qm_err_ini sec_err_ini = {
+	.hw_init		= sec_set_user_domain_and_cache,
 	.hw_err_enable		= sec_hw_error_enable,
 	.hw_err_disable		= sec_hw_error_disable,
 	.get_dev_hw_err_status	= sec_get_hw_err_status,
+	.clear_dev_hw_err_status = sec_clear_hw_err_status,
 	.log_dev_hw_err		= sec_log_hw_error,
+	.open_axi_master_ooo	= sec_open_axi_master_ooo,
 	.err_info		= {
 		.ce			= QM_BASE_CE,
 		.nfe			= QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT |
 					  QM_ACC_WB_NOT_READY_TIMEOUT,
 		.fe			= 0,
 		.msi			= QM_DB_RANDOM_INVALID,
+		.ecc_2bits_mask		= SEC_CORE_INT_STATUS_M_ECC,
+		.msi_wr_port		= BIT(0),
+		.acpi_rst		= "SRST",
 	}
 };
 
@@ -718,7 +740,7 @@ static int sec_pf_probe_init(struct sec_dev *sec)
 
 	qm->err_ini = &sec_err_ini;
 
-	ret = sec_set_user_domain_and_cache(sec);
+	ret = sec_set_user_domain_and_cache(qm);
 	if (ret)
 		return ret;
 
@@ -775,6 +797,7 @@ static int sec_probe_init(struct hisi_qm *qm, struct sec_dev *sec)
 		qm->qp_base = SEC_PF_DEF_Q_BASE;
 		qm->qp_num = pf_q_num;
 		qm->debug.curr_qm_qp_num = pf_q_num;
+		qm->qm_list = &sec_devices;
 
 		ret = sec_pf_probe_init(sec);
 		if (ret)
@@ -877,8 +900,17 @@ static int sec_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_remove_from_list;
 	}
 
+	if (qm->fun_type == QM_HW_PF && vfs_num) {
+		ret = hisi_qm_sriov_enable(pdev, vfs_num);
+		if (ret < 0)
+			goto err_crypto_unregister;
+	}
+
 	return 0;
 
+err_crypto_unregister:
+	sec_unregister_from_crypto();
+
 err_remove_from_list:
 	hisi_qm_del_from_list(qm, &sec_devices);
 	sec_debugfs_exit(sec);
@@ -893,110 +925,6 @@ static int sec_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return ret;
 }
 
-/* now we only support equal assignment */
-static int sec_vf_q_assign(struct sec_dev *sec, u32 num_vfs)
-{
-	struct hisi_qm *qm = &sec->qm;
-	u32 qp_num = qm->qp_num;
-	u32 q_base = qp_num;
-	u32 q_num, remain_q_num;
-	int i, j, ret;
-
-	if (!num_vfs)
-		return -EINVAL;
-
-	remain_q_num = qm->ctrl_qp_num - qp_num;
-	q_num = remain_q_num / num_vfs;
-
-	for (i = 1; i <= num_vfs; i++) {
-		if (i == num_vfs)
-			q_num += remain_q_num % num_vfs;
-		ret = hisi_qm_set_vft(qm, i, q_base, q_num);
-		if (ret) {
-			for (j = i; j > 0; j--)
-				hisi_qm_set_vft(qm, j, 0, 0);
-			return ret;
-		}
-		q_base += q_num;
-	}
-
-	return 0;
-}
-
-static int sec_clear_vft_config(struct sec_dev *sec)
-{
-	struct hisi_qm *qm = &sec->qm;
-	u32 num_vfs = sec->num_vfs;
-	int ret;
-	u32 i;
-
-	for (i = 1; i <= num_vfs; i++) {
-		ret = hisi_qm_set_vft(qm, i, 0, 0);
-		if (ret)
-			return ret;
-	}
-
-	sec->num_vfs = 0;
-
-	return 0;
-}
-
-static int sec_sriov_enable(struct pci_dev *pdev, int max_vfs)
-{
-	struct sec_dev *sec = pci_get_drvdata(pdev);
-	int pre_existing_vfs, ret;
-	u32 num_vfs;
-
-	pre_existing_vfs = pci_num_vf(pdev);
-
-	if (pre_existing_vfs) {
-		pci_err(pdev, "Can't enable VF. Please disable at first!\n");
-		return 0;
-	}
-
-	num_vfs = min_t(u32, max_vfs, SEC_VF_NUM);
-
-	ret = sec_vf_q_assign(sec, num_vfs);
-	if (ret) {
-		pci_err(pdev, "Can't assign queues for VF!\n");
-		return ret;
-	}
-
-	sec->num_vfs = num_vfs;
-
-	ret = pci_enable_sriov(pdev, num_vfs);
-	if (ret) {
-		pci_err(pdev, "Can't enable VF!\n");
-		sec_clear_vft_config(sec);
-		return ret;
-	}
-
-	return num_vfs;
-}
-
-static int sec_sriov_disable(struct pci_dev *pdev)
-{
-	struct sec_dev *sec = pci_get_drvdata(pdev);
-
-	if (pci_vfs_assigned(pdev)) {
-		pci_err(pdev, "Can't disable VFs while VFs are assigned!\n");
-		return -EPERM;
-	}
-
-	/* remove in sec_pci_driver will be called to free VF resources */
-	pci_disable_sriov(pdev);
-
-	return sec_clear_vft_config(sec);
-}
-
-static int sec_sriov_configure(struct pci_dev *pdev, int num_vfs)
-{
-	if (num_vfs)
-		return sec_sriov_enable(pdev, num_vfs);
-	else
-		return sec_sriov_disable(pdev);
-}
-
 static void sec_remove(struct pci_dev *pdev)
 {
 	struct sec_dev *sec = pci_get_drvdata(pdev);
@@ -1006,8 +934,8 @@ static void sec_remove(struct pci_dev *pdev)
 
 	hisi_qm_del_from_list(qm, &sec_devices);
 
-	if (qm->fun_type == QM_HW_PF && sec->num_vfs)
-		(void)sec_sriov_disable(pdev);
+	if (qm->fun_type == QM_HW_PF && qm->vfs_num)
+		hisi_qm_sriov_disable(pdev);
 
 	sec_debugfs_exit(sec);
 
@@ -1023,6 +951,7 @@ static void sec_remove(struct pci_dev *pdev)
 
 static const struct pci_error_handlers sec_err_handler = {
 	.error_detected = hisi_qm_dev_err_detected,
+	.slot_reset =  hisi_qm_dev_slot_reset,
 };
 
 static struct pci_driver sec_pci_driver = {
@@ -1031,7 +960,7 @@ static struct pci_driver sec_pci_driver = {
 	.probe = sec_probe,
 	.remove = sec_remove,
 	.err_handler = &sec_err_handler,
-	.sriov_configure = sec_sriov_configure,
+	.sriov_configure = hisi_qm_sriov_configure,
 };
 
 static void sec_register_debugfs(void)
diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c
index fcc85d2dbd07..37db11f96fab 100644
--- a/drivers/crypto/hisilicon/zip/zip_main.c
+++ b/drivers/crypto/hisilicon/zip/zip_main.c
@@ -62,6 +62,7 @@
 
 #define HZIP_CORE_INT_SOURCE		0x3010A0
 #define HZIP_CORE_INT_MASK_REG		0x3010A4
+#define HZIP_CORE_INT_SET		0x3010A8
 #define HZIP_CORE_INT_STATUS		0x3010AC
 #define HZIP_CORE_INT_STATUS_M_ECC	BIT(1)
 #define HZIP_CORE_SRAM_ECC_ERR_INFO	0x301148
@@ -83,6 +84,9 @@
 
 #define HZIP_SOFT_CTRL_CNT_CLR_CE	0x301000
 #define SOFT_CTRL_CNT_CLR_CE_BIT	BIT(0)
+#define HZIP_SOFT_CTRL_ZIP_CONTROL	0x30100C
+#define HZIP_AXI_SHUTDOWN_ENABLE	BIT(14)
+#define HZIP_WR_PORT			BIT(11)
 
 #define HZIP_BUF_SIZE			22
 
@@ -134,7 +138,6 @@ struct ctrl_debug_file {
  * Just relevant for PF.
  */
 struct hisi_zip_ctrl {
-	u32 num_vfs;
 	struct hisi_zip *hisi_zip;
 	struct dentry *debug_root;
 	struct ctrl_debug_file files[HZIP_DEBUG_FILE_NUM];
@@ -232,9 +235,14 @@ static u32 pf_q_num = HZIP_PF_DEF_Q_NUM;
 module_param_cb(pf_q_num, &pf_q_num_ops, &pf_q_num, 0444);
 MODULE_PARM_DESC(pf_q_num, "Number of queues in PF(v1 1-4096, v2 1-1024)");
 
+static const struct kernel_param_ops vfs_num_ops = {
+	.set = vfs_num_set,
+	.get = param_get_int,
+};
+
 static u32 vfs_num;
-module_param(vfs_num, uint, 0444);
-MODULE_PARM_DESC(vfs_num, "Number of VFs to enable(1-63)");
+module_param_cb(vfs_num, &vfs_num_ops, &vfs_num, 0444);
+MODULE_PARM_DESC(vfs_num, "Number of VFs to enable(1-63), 0(default)");
 
 static const struct pci_device_id hisi_zip_dev_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_ZIP_PF) },
@@ -250,9 +258,9 @@ int zip_create_qps(struct hisi_qp **qps, int qp_num)
 	return hisi_qm_alloc_qps_node(&zip_devices, qp_num, 0, node, qps);
 }
 
-static void hisi_zip_set_user_domain_and_cache(struct hisi_zip *hisi_zip)
+static int hisi_zip_set_user_domain_and_cache(struct hisi_qm *qm)
 {
-	void __iomem *base = hisi_zip->qm.io_base;
+	void __iomem *base = qm->io_base;
 
 	/* qm user domain */
 	writel(AXUSER_BASE, base + QM_ARUSER_M_CFG_1);
@@ -279,7 +287,7 @@ static void hisi_zip_set_user_domain_and_cache(struct hisi_zip *hisi_zip)
 	writel(AXUSER_BASE, base + HZIP_SGL_RUSER_32_63);
 	writel(AXUSER_BASE, base + HZIP_BD_WUSER_32_63);
 
-	if (hisi_zip->qm.use_sva) {
+	if (qm->use_sva) {
 		writel(AXUSER_BASE | AXUSER_SSV, base + HZIP_DATA_RUSER_32_63);
 		writel(AXUSER_BASE | AXUSER_SSV, base + HZIP_DATA_WUSER_32_63);
 	} else {
@@ -295,6 +303,8 @@ static void hisi_zip_set_user_domain_and_cache(struct hisi_zip *hisi_zip)
 	writel(SQC_CACHE_ENABLE | CQC_CACHE_ENABLE | SQC_CACHE_WB_ENABLE |
 	       CQC_CACHE_WB_ENABLE | FIELD_PREP(SQC_CACHE_WB_THRD, 1) |
 	       FIELD_PREP(CQC_CACHE_WB_THRD, 1), base + QM_CACHE_CTL);
+
+	return 0;
 }
 
 static void hisi_zip_hw_error_enable(struct hisi_qm *qm)
@@ -342,21 +352,20 @@ static u32 current_qm_read(struct ctrl_debug_file *file)
 static int current_qm_write(struct ctrl_debug_file *file, u32 val)
 {
 	struct hisi_qm *qm = file_to_qm(file);
-	struct hisi_zip_ctrl *ctrl = file->ctrl;
 	u32 vfq_num;
 	u32 tmp;
 
-	if (val > ctrl->num_vfs)
+	if (val > qm->vfs_num)
 		return -EINVAL;
 
 	/* Calculate curr_qm_qp_num and store */
 	if (val == 0) {
 		qm->debug.curr_qm_qp_num = qm->qp_num;
 	} else {
-		vfq_num = (qm->ctrl_qp_num - qm->qp_num) / ctrl->num_vfs;
-		if (val == ctrl->num_vfs)
+		vfq_num = (qm->ctrl_qp_num - qm->qp_num) / qm->vfs_num;
+		if (val == qm->vfs_num)
 			qm->debug.curr_qm_qp_num = qm->ctrl_qp_num -
-				qm->qp_num - (ctrl->num_vfs - 1) * vfq_num;
+				qm->qp_num - (qm->vfs_num - 1) * vfq_num;
 		else
 			qm->debug.curr_qm_qp_num = vfq_num;
 	}
@@ -598,8 +607,6 @@ static void hisi_zip_log_hw_error(struct hisi_qm *qm, u32 err_sts)
 		}
 		err++;
 	}
-
-	writel(err_sts, qm->io_base + HZIP_CORE_INT_SOURCE);
 }
 
 static u32 hisi_zip_get_hw_err_status(struct hisi_qm *qm)
@@ -607,17 +614,56 @@ static u32 hisi_zip_get_hw_err_status(struct hisi_qm *qm)
 	return readl(qm->io_base + HZIP_CORE_INT_STATUS);
 }
 
+static void hisi_zip_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts)
+{
+	writel(err_sts, qm->io_base + HZIP_CORE_INT_SOURCE);
+}
+
+static void hisi_zip_open_axi_master_ooo(struct hisi_qm *qm)
+{
+	u32 val;
+
+	val = readl(qm->io_base + HZIP_SOFT_CTRL_ZIP_CONTROL);
+
+	writel(val & ~HZIP_AXI_SHUTDOWN_ENABLE,
+	       qm->io_base + HZIP_SOFT_CTRL_ZIP_CONTROL);
+
+	writel(val | HZIP_AXI_SHUTDOWN_ENABLE,
+	       qm->io_base + HZIP_SOFT_CTRL_ZIP_CONTROL);
+}
+
+static void hisi_zip_close_axi_master_ooo(struct hisi_qm *qm)
+{
+	u32 nfe_enb;
+
+	/* Disable ECC Mbit error report. */
+	nfe_enb = readl(qm->io_base + HZIP_CORE_INT_RAS_NFE_ENB);
+	writel(nfe_enb & ~HZIP_CORE_INT_STATUS_M_ECC,
+	       qm->io_base + HZIP_CORE_INT_RAS_NFE_ENB);
+
+	/* Inject zip ECC Mbit error to block master ooo. */
+	writel(HZIP_CORE_INT_STATUS_M_ECC,
+	       qm->io_base + HZIP_CORE_INT_SET);
+}
+
 static const struct hisi_qm_err_ini hisi_zip_err_ini = {
+	.hw_init		= hisi_zip_set_user_domain_and_cache,
 	.hw_err_enable		= hisi_zip_hw_error_enable,
 	.hw_err_disable		= hisi_zip_hw_error_disable,
 	.get_dev_hw_err_status	= hisi_zip_get_hw_err_status,
+	.clear_dev_hw_err_status = hisi_zip_clear_hw_err_status,
 	.log_dev_hw_err		= hisi_zip_log_hw_error,
+	.open_axi_master_ooo	= hisi_zip_open_axi_master_ooo,
+	.close_axi_master_ooo	= hisi_zip_close_axi_master_ooo,
 	.err_info		= {
 		.ce			= QM_BASE_CE,
 		.nfe			= QM_BASE_NFE |
 					  QM_ACC_WB_NOT_READY_TIMEOUT,
 		.fe			= 0,
 		.msi			= QM_DB_RANDOM_INVALID,
+		.ecc_2bits_mask		= HZIP_CORE_INT_STATUS_M_ECC,
+		.msi_wr_port		= HZIP_WR_PORT,
+		.acpi_rst		= "ZRST",
 	}
 };
 
@@ -648,109 +694,13 @@ static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip)
 
 	qm->err_ini = &hisi_zip_err_ini;
 
-	hisi_zip_set_user_domain_and_cache(hisi_zip);
+	hisi_zip_set_user_domain_and_cache(qm);
 	hisi_qm_dev_err_init(qm);
 	hisi_zip_debug_regs_clear(hisi_zip);
 
 	return 0;
 }
 
-/* Currently we only support equal assignment */
-static int hisi_zip_vf_q_assign(struct hisi_zip *hisi_zip, int num_vfs)
-{
-	struct hisi_qm *qm = &hisi_zip->qm;
-	u32 qp_num = qm->qp_num;
-	u32 q_base = qp_num;
-	u32 q_num, remain_q_num, i;
-	int ret;
-
-	if (!num_vfs)
-		return -EINVAL;
-
-	remain_q_num = qm->ctrl_qp_num - qp_num;
-	if (remain_q_num < num_vfs)
-		return -EINVAL;
-
-	q_num = remain_q_num / num_vfs;
-	for (i = 1; i <= num_vfs; i++) {
-		if (i == num_vfs)
-			q_num += remain_q_num % num_vfs;
-		ret = hisi_qm_set_vft(qm, i, q_base, q_num);
-		if (ret)
-			return ret;
-		q_base += q_num;
-	}
-
-	return 0;
-}
-
-static int hisi_zip_clear_vft_config(struct hisi_zip *hisi_zip)
-{
-	struct hisi_zip_ctrl *ctrl = hisi_zip->ctrl;
-	struct hisi_qm *qm = &hisi_zip->qm;
-	u32 i, num_vfs = ctrl->num_vfs;
-	int ret;
-
-	for (i = 1; i <= num_vfs; i++) {
-		ret = hisi_qm_set_vft(qm, i, 0, 0);
-		if (ret)
-			return ret;
-	}
-
-	ctrl->num_vfs = 0;
-
-	return 0;
-}
-
-static int hisi_zip_sriov_enable(struct pci_dev *pdev, int max_vfs)
-{
-	struct hisi_zip *hisi_zip = pci_get_drvdata(pdev);
-	int pre_existing_vfs, num_vfs, ret;
-
-	pre_existing_vfs = pci_num_vf(pdev);
-
-	if (pre_existing_vfs) {
-		dev_err(&pdev->dev,
-			"Can't enable VF. Please disable pre-enabled VFs!\n");
-		return 0;
-	}
-
-	num_vfs = min_t(int, max_vfs, HZIP_VF_NUM);
-
-	ret = hisi_zip_vf_q_assign(hisi_zip, num_vfs);
-	if (ret) {
-		dev_err(&pdev->dev, "Can't assign queues for VF!\n");
-		return ret;
-	}
-
-	hisi_zip->ctrl->num_vfs = num_vfs;
-
-	ret = pci_enable_sriov(pdev, num_vfs);
-	if (ret) {
-		dev_err(&pdev->dev, "Can't enable VF!\n");
-		hisi_zip_clear_vft_config(hisi_zip);
-		return ret;
-	}
-
-	return num_vfs;
-}
-
-static int hisi_zip_sriov_disable(struct pci_dev *pdev)
-{
-	struct hisi_zip *hisi_zip = pci_get_drvdata(pdev);
-
-	if (pci_vfs_assigned(pdev)) {
-		dev_err(&pdev->dev,
-			"Can't disable VFs while VFs are assigned!\n");
-		return -EPERM;
-	}
-
-	/* remove in hisi_zip_pci_driver will be called to free VF resources */
-	pci_disable_sriov(pdev);
-
-	return hisi_zip_clear_vft_config(hisi_zip);
-}
-
 static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct hisi_zip *hisi_zip;
@@ -790,6 +740,7 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 		qm->qp_base = HZIP_PF_DEF_Q_BASE;
 		qm->qp_num = pf_q_num;
+		qm->qm_list = &zip_devices;
 	} else if (qm->fun_type == QM_HW_VF) {
 		/*
 		 * have no way to get qm configure in VM in v1 hardware,
@@ -823,7 +774,7 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	if (qm->fun_type == QM_HW_PF && vfs_num > 0) {
-		ret = hisi_zip_sriov_enable(pdev, vfs_num);
+		ret = hisi_qm_sriov_enable(pdev, vfs_num);
 		if (ret < 0)
 			goto err_remove_from_list;
 	}
@@ -839,21 +790,13 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return ret;
 }
 
-static int hisi_zip_sriov_configure(struct pci_dev *pdev, int num_vfs)
-{
-	if (num_vfs == 0)
-		return hisi_zip_sriov_disable(pdev);
-	else
-		return hisi_zip_sriov_enable(pdev, num_vfs);
-}
-
 static void hisi_zip_remove(struct pci_dev *pdev)
 {
 	struct hisi_zip *hisi_zip = pci_get_drvdata(pdev);
 	struct hisi_qm *qm = &hisi_zip->qm;
 
-	if (qm->fun_type == QM_HW_PF && hisi_zip->ctrl->num_vfs != 0)
-		hisi_zip_sriov_disable(pdev);
+	if (qm->fun_type == QM_HW_PF && qm->vfs_num)
+		hisi_qm_sriov_disable(pdev);
 
 	hisi_zip_debugfs_exit(hisi_zip);
 	hisi_qm_stop(qm);
@@ -865,6 +808,7 @@ static void hisi_zip_remove(struct pci_dev *pdev)
 
 static const struct pci_error_handlers hisi_zip_err_handler = {
 	.error_detected	= hisi_qm_dev_err_detected,
+	.slot_reset	= hisi_qm_dev_slot_reset,
 };
 
 static struct pci_driver hisi_zip_pci_driver = {
@@ -873,7 +817,7 @@ static struct pci_driver hisi_zip_pci_driver = {
 	.probe			= hisi_zip_probe,
 	.remove			= hisi_zip_remove,
 	.sriov_configure	= IS_ENABLED(CONFIG_PCI_IOV) ?
-					hisi_zip_sriov_configure : NULL,
+					hisi_qm_sriov_configure : NULL,
 	.err_handler		= &hisi_zip_err_handler,
 };
 
diff --git a/drivers/crypto/marvell/octeontx/otx_cptpf_main.c b/drivers/crypto/marvell/octeontx/otx_cptpf_main.c
index 200fb3303db0..34bb3063eb70 100644
--- a/drivers/crypto/marvell/octeontx/otx_cptpf_main.c
+++ b/drivers/crypto/marvell/octeontx/otx_cptpf_main.c
@@ -79,13 +79,13 @@ static int otx_cpt_device_init(struct otx_cpt_device *cpt)
 	/* Check BIST status */
 	bist = (u64)otx_cpt_check_bist_status(cpt);
 	if (bist) {
-		dev_err(dev, "RAM BIST failed with code 0x%llx", bist);
+		dev_err(dev, "RAM BIST failed with code 0x%llx\n", bist);
 		return -ENODEV;
 	}
 
 	bist = otx_cpt_check_exe_bist_status(cpt);
 	if (bist) {
-		dev_err(dev, "Engine BIST failed with code 0x%llx", bist);
+		dev_err(dev, "Engine BIST failed with code 0x%llx\n", bist);
 		return -ENODEV;
 	}
 
diff --git a/drivers/crypto/marvell/octeontx/otx_cptpf_mbox.c b/drivers/crypto/marvell/octeontx/otx_cptpf_mbox.c
index a6774232e9a3..a9e3de65875a 100644
--- a/drivers/crypto/marvell/octeontx/otx_cptpf_mbox.c
+++ b/drivers/crypto/marvell/octeontx/otx_cptpf_mbox.c
@@ -63,11 +63,11 @@ static void dump_mbox_msg(struct otx_cpt_mbox *mbox_msg, int vf_id)
 	hex_dump_to_buffer(mbox_msg, sizeof(struct otx_cpt_mbox), 16, 8,
 			   raw_data_str, OTX_CPT_MAX_MBOX_DATA_STR_SIZE, false);
 	if (vf_id >= 0)
-		pr_debug("MBOX opcode %s received from VF%d raw_data %s",
+		pr_debug("MBOX opcode %s received from VF%d raw_data %s\n",
 			 get_mbox_opcode_str(mbox_msg->msg), vf_id,
 			 raw_data_str);
 	else
-		pr_debug("MBOX opcode %s received from PF raw_data %s",
+		pr_debug("MBOX opcode %s received from PF raw_data %s\n",
 			 get_mbox_opcode_str(mbox_msg->msg), raw_data_str);
 }
 
@@ -140,20 +140,20 @@ static int otx_cpt_bind_vq_to_grp(struct otx_cpt_device *cpt, u8 q, u8 grp)
 	struct otx_cpt_ucode *ucode;
 
 	if (q >= cpt->max_vfs) {
-		dev_err(dev, "Requested queue %d is > than maximum avail %d",
+		dev_err(dev, "Requested queue %d is > than maximum avail %d\n",
 			q, cpt->max_vfs);
 		return -EINVAL;
 	}
 
 	if (grp >= OTX_CPT_MAX_ENGINE_GROUPS) {
-		dev_err(dev, "Requested group %d is > than maximum avail %d",
+		dev_err(dev, "Requested group %d is > than maximum avail %d\n",
 			grp, OTX_CPT_MAX_ENGINE_GROUPS);
 		return -EINVAL;
 	}
 
 	eng_grp = &cpt->eng_grps.grp[grp];
 	if (!eng_grp->is_enabled) {
-		dev_err(dev, "Requested engine group %d is disabled", grp);
+		dev_err(dev, "Requested engine group %d is disabled\n", grp);
 		return -EINVAL;
 	}
 
@@ -212,7 +212,7 @@ static void otx_cpt_handle_mbox_intr(struct otx_cpt_device *cpt, int vf)
 		vftype = otx_cpt_bind_vq_to_grp(cpt, vf, (u8)mbx.data);
 		if ((vftype != OTX_CPT_AE_TYPES) &&
 		    (vftype != OTX_CPT_SE_TYPES)) {
-			dev_err(dev, "VF%d binding to eng group %llu failed",
+			dev_err(dev, "VF%d binding to eng group %llu failed\n",
 				vf, mbx.data);
 			otx_cptpf_mbox_send_nack(cpt, vf, &mbx);
 		} else {
diff --git a/drivers/crypto/marvell/octeontx/otx_cptpf_ucode.c b/drivers/crypto/marvell/octeontx/otx_cptpf_ucode.c
index d04baa319592..fec8f3b9b112 100644
--- a/drivers/crypto/marvell/octeontx/otx_cptpf_ucode.c
+++ b/drivers/crypto/marvell/octeontx/otx_cptpf_ucode.c
@@ -62,7 +62,7 @@ static struct otx_cpt_bitmap get_cores_bmap(struct device *dev,
 	int i;
 
 	if (eng_grp->g->engs_num > OTX_CPT_MAX_ENGINES) {
-		dev_err(dev, "unsupported number of engines %d on octeontx",
+		dev_err(dev, "unsupported number of engines %d on octeontx\n",
 			eng_grp->g->engs_num);
 		return bmap;
 	}
@@ -78,7 +78,7 @@ static struct otx_cpt_bitmap get_cores_bmap(struct device *dev,
 	}
 
 	if (!found)
-		dev_err(dev, "No engines reserved for engine group %d",
+		dev_err(dev, "No engines reserved for engine group %d\n",
 			eng_grp->idx);
 	return bmap;
 }
@@ -306,7 +306,7 @@ static int process_tar_file(struct device *dev,
 	ucode_size = ntohl(ucode_hdr->code_length) * 2;
 	if (!ucode_size || (size < round_up(ucode_size, 16) +
 	    sizeof(struct otx_cpt_ucode_hdr) + OTX_CPT_UCODE_SIGN_LEN)) {
-		dev_err(dev, "Ucode %s invalid size", filename);
+		dev_err(dev, "Ucode %s invalid size\n", filename);
 		return -EINVAL;
 	}
 
@@ -379,18 +379,18 @@ static void print_tar_dbg_info(struct tar_arch_info_t *tar_arch,
 {
 	struct tar_ucode_info_t *curr;
 
-	pr_debug("Tar archive filename %s", tar_filename);
-	pr_debug("Tar archive pointer %p, size %ld", tar_arch->fw->data,
+	pr_debug("Tar archive filename %s\n", tar_filename);
+	pr_debug("Tar archive pointer %p, size %ld\n", tar_arch->fw->data,
 		 tar_arch->fw->size);
 	list_for_each_entry(curr, &tar_arch->ucodes, list) {
-		pr_debug("Ucode filename %s", curr->ucode.filename);
-		pr_debug("Ucode version string %s", curr->ucode.ver_str);
-		pr_debug("Ucode version %d.%d.%d.%d",
+		pr_debug("Ucode filename %s\n", curr->ucode.filename);
+		pr_debug("Ucode version string %s\n", curr->ucode.ver_str);
+		pr_debug("Ucode version %d.%d.%d.%d\n",
 			 curr->ucode.ver_num.nn, curr->ucode.ver_num.xx,
 			 curr->ucode.ver_num.yy, curr->ucode.ver_num.zz);
-		pr_debug("Ucode type (%d) %s", curr->ucode.type,
+		pr_debug("Ucode type (%d) %s\n", curr->ucode.type,
 			 get_ucode_type_str(curr->ucode.type));
-		pr_debug("Ucode size %d", curr->ucode.size);
+		pr_debug("Ucode size %d\n", curr->ucode.size);
 		pr_debug("Ucode ptr %p\n", curr->ucode_ptr);
 	}
 }
@@ -417,14 +417,14 @@ static struct tar_arch_info_t *load_tar_archive(struct device *dev,
 		goto release_tar_arch;
 
 	if (tar_arch->fw->size < TAR_BLOCK_LEN) {
-		dev_err(dev, "Invalid tar archive %s ", tar_filename);
+		dev_err(dev, "Invalid tar archive %s\n", tar_filename);
 		goto release_tar_arch;
 	}
 
 	tar_size = tar_arch->fw->size;
 	tar_blk = (struct tar_blk_t *) tar_arch->fw->data;
 	if (strncmp(tar_blk->hdr.magic, TAR_MAGIC, TAR_MAGIC_LEN - 1)) {
-		dev_err(dev, "Unsupported format of tar archive %s",
+		dev_err(dev, "Unsupported format of tar archive %s\n",
 			tar_filename);
 		goto release_tar_arch;
 	}
@@ -437,7 +437,7 @@ static struct tar_arch_info_t *load_tar_archive(struct device *dev,
 
 		if (tar_offs + cur_size > tar_size ||
 		    tar_offs + 2*TAR_BLOCK_LEN > tar_size) {
-			dev_err(dev, "Invalid tar archive %s ", tar_filename);
+			dev_err(dev, "Invalid tar archive %s\n", tar_filename);
 			goto release_tar_arch;
 		}
 
@@ -458,7 +458,7 @@ static struct tar_arch_info_t *load_tar_archive(struct device *dev,
 
 		/* Check for the end of the archive */
 		if (tar_offs + 2*TAR_BLOCK_LEN > tar_size) {
-			dev_err(dev, "Invalid tar archive %s ", tar_filename);
+			dev_err(dev, "Invalid tar archive %s\n", tar_filename);
 			goto release_tar_arch;
 		}
 
@@ -563,13 +563,13 @@ static void print_engs_info(struct otx_cpt_eng_grp_info *eng_grp,
 
 static void print_ucode_dbg_info(struct otx_cpt_ucode *ucode)
 {
-	pr_debug("Ucode info");
-	pr_debug("Ucode version string %s", ucode->ver_str);
-	pr_debug("Ucode version %d.%d.%d.%d", ucode->ver_num.nn,
+	pr_debug("Ucode info\n");
+	pr_debug("Ucode version string %s\n", ucode->ver_str);
+	pr_debug("Ucode version %d.%d.%d.%d\n", ucode->ver_num.nn,
 		 ucode->ver_num.xx, ucode->ver_num.yy, ucode->ver_num.zz);
-	pr_debug("Ucode type %s", get_ucode_type_str(ucode->type));
-	pr_debug("Ucode size %d", ucode->size);
-	pr_debug("Ucode virt address %16.16llx", (u64)ucode->align_va);
+	pr_debug("Ucode type %s\n", get_ucode_type_str(ucode->type));
+	pr_debug("Ucode size %d\n", ucode->size);
+	pr_debug("Ucode virt address %16.16llx\n", (u64)ucode->align_va);
 	pr_debug("Ucode phys address %16.16llx\n", ucode->align_dma);
 }
 
@@ -600,19 +600,19 @@ static void print_dbg_info(struct device *dev,
 	u32 mask[4];
 	int i, j;
 
-	pr_debug("Engine groups global info");
-	pr_debug("max SE %d, max AE %d",
+	pr_debug("Engine groups global info\n");
+	pr_debug("max SE %d, max AE %d\n",
 		 eng_grps->avail.max_se_cnt, eng_grps->avail.max_ae_cnt);
-	pr_debug("free SE %d", eng_grps->avail.se_cnt);
-	pr_debug("free AE %d", eng_grps->avail.ae_cnt);
+	pr_debug("free SE %d\n", eng_grps->avail.se_cnt);
+	pr_debug("free AE %d\n", eng_grps->avail.ae_cnt);
 
 	for (i = 0; i < OTX_CPT_MAX_ENGINE_GROUPS; i++) {
 		grp = &eng_grps->grp[i];
-		pr_debug("engine_group%d, state %s", i, grp->is_enabled ?
+		pr_debug("engine_group%d, state %s\n", i, grp->is_enabled ?
 			 "enabled" : "disabled");
 		if (grp->is_enabled) {
 			mirrored_grp = &eng_grps->grp[grp->mirror.idx];
-			pr_debug("Ucode0 filename %s, version %s",
+			pr_debug("Ucode0 filename %s, version %s\n",
 				 grp->mirror.is_ena ?
 				 mirrored_grp->ucode[0].filename :
 				 grp->ucode[0].filename,
@@ -626,18 +626,18 @@ static void print_dbg_info(struct device *dev,
 			if (engs->type) {
 				print_engs_info(grp, engs_info,
 						2*OTX_CPT_UCODE_NAME_LENGTH, j);
-				pr_debug("Slot%d: %s", j, engs_info);
+				pr_debug("Slot%d: %s\n", j, engs_info);
 				bitmap_to_arr32(mask, engs->bmap,
 						eng_grps->engs_num);
-				pr_debug("Mask:  %8.8x %8.8x %8.8x %8.8x",
+				pr_debug("Mask: %8.8x %8.8x %8.8x %8.8x\n",
 					 mask[3], mask[2], mask[1], mask[0]);
 			} else
-				pr_debug("Slot%d not used", j);
+				pr_debug("Slot%d not used\n", j);
 		}
 		if (grp->is_enabled) {
 			cpt_print_engines_mask(grp, dev, engs_mask,
 					       OTX_CPT_UCODE_NAME_LENGTH);
-			pr_debug("Cmask: %s", engs_mask);
+			pr_debug("Cmask: %s\n", engs_mask);
 		}
 	}
 }
@@ -766,7 +766,7 @@ static int check_engines_availability(struct device *dev,
 
 	if (avail_cnt < req_eng->count) {
 		dev_err(dev,
-			"Error available %s engines %d < than requested %d",
+			"Error available %s engines %d < than requested %d\n",
 			get_eng_type_str(req_eng->type),
 			avail_cnt, req_eng->count);
 		return -EBUSY;
@@ -867,7 +867,7 @@ static int copy_ucode_to_dma_mem(struct device *dev,
 				       OTX_CPT_UCODE_ALIGNMENT,
 				       &ucode->dma, GFP_KERNEL);
 	if (!ucode->va) {
-		dev_err(dev, "Unable to allocate space for microcode");
+		dev_err(dev, "Unable to allocate space for microcode\n");
 		return -ENOMEM;
 	}
 	ucode->align_va = PTR_ALIGN(ucode->va, OTX_CPT_UCODE_ALIGNMENT);
@@ -905,15 +905,15 @@ static int ucode_load(struct device *dev, struct otx_cpt_ucode *ucode,
 	ucode->size = ntohl(ucode_hdr->code_length) * 2;
 	if (!ucode->size || (fw->size < round_up(ucode->size, 16)
 	    + sizeof(struct otx_cpt_ucode_hdr) + OTX_CPT_UCODE_SIGN_LEN)) {
-		dev_err(dev, "Ucode %s invalid size", ucode_filename);
+		dev_err(dev, "Ucode %s invalid size\n", ucode_filename);
 		ret = -EINVAL;
 		goto release_fw;
 	}
 
 	ret = get_ucode_type(ucode_hdr, &ucode->type);
 	if (ret) {
-		dev_err(dev, "Microcode %s unknown type 0x%x", ucode->filename,
-			ucode->type);
+		dev_err(dev, "Microcode %s unknown type 0x%x\n",
+			ucode->filename, ucode->type);
 		goto release_fw;
 	}
 
@@ -1083,7 +1083,7 @@ static int eng_grp_update_masks(struct device *dev,
 			break;
 
 		default:
-			dev_err(dev, "Invalid engine type %d", engs->type);
+			dev_err(dev, "Invalid engine type %d\n", engs->type);
 			return -EINVAL;
 		}
 
@@ -1142,13 +1142,14 @@ static int delete_engine_group(struct device *dev,
 		return -EINVAL;
 
 	if (eng_grp->mirror.ref_count) {
-		dev_err(dev, "Can't delete engine_group%d as it is used by:",
+		dev_err(dev, "Can't delete engine_group%d as it is used by engine_group(s):",
 			eng_grp->idx);
 		for (i = 0; i < OTX_CPT_MAX_ENGINE_GROUPS; i++) {
 			if (eng_grp->g->grp[i].mirror.is_ena &&
 			    eng_grp->g->grp[i].mirror.idx == eng_grp->idx)
-				dev_err(dev, "engine_group%d", i);
+				pr_cont(" %d", i);
 		}
+		pr_cont("\n");
 		return -EINVAL;
 	}
 
@@ -1182,7 +1183,7 @@ static int validate_1_ucode_scenario(struct device *dev,
 		if (!otx_cpt_uc_supports_eng_type(&eng_grp->ucode[0],
 						  engs[i].type)) {
 			dev_err(dev,
-				"Microcode %s does not support %s engines",
+				"Microcode %s does not support %s engines\n",
 				eng_grp->ucode[0].filename,
 				get_eng_type_str(engs[i].type));
 			return -EINVAL;
@@ -1220,7 +1221,7 @@ static int create_engine_group(struct device *dev,
 	/* Validate if requested engine types are supported by this device */
 	for (i = 0; i < engs_cnt; i++)
 		if (!dev_supports_eng_type(eng_grps, engs[i].type)) {
-			dev_err(dev, "Device does not support %s engines",
+			dev_err(dev, "Device does not support %s engines\n",
 				get_eng_type_str(engs[i].type));
 			return -EPERM;
 		}
@@ -1228,7 +1229,7 @@ static int create_engine_group(struct device *dev,
 	/* Find engine group which is not used */
 	eng_grp = find_unused_eng_grp(eng_grps);
 	if (!eng_grp) {
-		dev_err(dev, "Error all engine groups are being used");
+		dev_err(dev, "Error all engine groups are being used\n");
 		return -ENOSPC;
 	}
 
@@ -1298,11 +1299,11 @@ static int create_engine_group(struct device *dev,
 	eng_grp->is_enabled = true;
 	if (eng_grp->mirror.is_ena)
 		dev_info(dev,
-			 "Engine_group%d: reuse microcode %s from group %d",
+			 "Engine_group%d: reuse microcode %s from group %d\n",
 			 eng_grp->idx, mirrored_eng_grp->ucode[0].ver_str,
 			 mirrored_eng_grp->idx);
 	else
-		dev_info(dev, "Engine_group%d: microcode loaded %s",
+		dev_info(dev, "Engine_group%d: microcode loaded %s\n",
 			 eng_grp->idx, eng_grp->ucode[0].ver_str);
 
 	return 0;
@@ -1412,14 +1413,14 @@ static ssize_t ucode_load_store(struct device *dev,
 	} else {
 		if (del_grp_idx < 0 ||
 		    del_grp_idx >= OTX_CPT_MAX_ENGINE_GROUPS) {
-			dev_err(dev, "Invalid engine group index %d",
+			dev_err(dev, "Invalid engine group index %d\n",
 				del_grp_idx);
 			ret = -EINVAL;
 			return ret;
 		}
 
 		if (!eng_grps->grp[del_grp_idx].is_enabled) {
-			dev_err(dev, "Error engine_group%d is not configured",
+			dev_err(dev, "Error engine_group%d is not configured\n",
 				del_grp_idx);
 			ret = -EINVAL;
 			return ret;
@@ -1568,7 +1569,7 @@ void otx_cpt_disable_all_cores(struct otx_cpt_device *cpt)
 		udelay(CSR_DELAY);
 		reg = readq(cpt->reg_base + OTX_CPT_PF_EXEC_BUSY);
 		if (timeout--) {
-			dev_warn(&cpt->pdev->dev, "Cores still busy");
+			dev_warn(&cpt->pdev->dev, "Cores still busy\n");
 			break;
 		}
 	}
@@ -1626,7 +1627,7 @@ int otx_cpt_init_eng_grps(struct pci_dev *pdev,
 			     eng_grps->avail.max_ae_cnt;
 	if (eng_grps->engs_num > OTX_CPT_MAX_ENGINES) {
 		dev_err(&pdev->dev,
-			"Number of engines %d > than max supported %d",
+			"Number of engines %d > than max supported %d\n",
 			eng_grps->engs_num, OTX_CPT_MAX_ENGINES);
 		ret = -EINVAL;
 		goto err;
diff --git a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c
index 06202bcffb33..60e744f680d3 100644
--- a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c
+++ b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c
@@ -1660,7 +1660,7 @@ int otx_cpt_crypto_init(struct pci_dev *pdev, struct module *mod,
 	case OTX_CPT_SE_TYPES:
 		count = atomic_read(&se_devices.count);
 		if (count >= CPT_MAX_VF_NUM) {
-			dev_err(&pdev->dev, "No space to add a new device");
+			dev_err(&pdev->dev, "No space to add a new device\n");
 			ret = -ENOSPC;
 			goto err;
 		}
@@ -1687,7 +1687,7 @@ int otx_cpt_crypto_init(struct pci_dev *pdev, struct module *mod,
 	case OTX_CPT_AE_TYPES:
 		count = atomic_read(&ae_devices.count);
 		if (count >= CPT_MAX_VF_NUM) {
-			dev_err(&pdev->dev, "No space to a add new device");
+			dev_err(&pdev->dev, "No space to a add new device\n");
 			ret = -ENOSPC;
 			goto err;
 		}
@@ -1728,7 +1728,7 @@ void otx_cpt_crypto_exit(struct pci_dev *pdev, struct module *mod,
 		}
 
 	if (!dev_found) {
-		dev_err(&pdev->dev, "%s device not found", __func__);
+		dev_err(&pdev->dev, "%s device not found\n", __func__);
 		goto exit;
 	}
 
diff --git a/drivers/crypto/marvell/octeontx/otx_cptvf_main.c b/drivers/crypto/marvell/octeontx/otx_cptvf_main.c
index a91860b5dc77..ce3168327a39 100644
--- a/drivers/crypto/marvell/octeontx/otx_cptvf_main.c
+++ b/drivers/crypto/marvell/octeontx/otx_cptvf_main.c
@@ -584,7 +584,7 @@ static irqreturn_t cptvf_done_intr_handler(int __always_unused irq,
 		cptvf_write_vq_done_ack(cptvf, intr);
 		wqe = get_cptvf_vq_wqe(cptvf, 0);
 		if (unlikely(!wqe)) {
-			dev_err(&pdev->dev, "No work to schedule for VF (%d)",
+			dev_err(&pdev->dev, "No work to schedule for VF (%d)\n",
 				cptvf->vfid);
 			return IRQ_NONE;
 		}
@@ -602,7 +602,7 @@ static void cptvf_set_irq_affinity(struct otx_cptvf *cptvf, int vec)
 	if (!zalloc_cpumask_var(&cptvf->affinity_mask[vec],
 				GFP_KERNEL)) {
 		dev_err(&pdev->dev,
-			"Allocation failed for affinity_mask for VF %d",
+			"Allocation failed for affinity_mask for VF %d\n",
 			cptvf->vfid);
 		return;
 	}
@@ -691,7 +691,7 @@ static ssize_t vf_engine_group_store(struct device *dev,
 		return -EINVAL;
 
 	if (val >= OTX_CPT_MAX_ENGINE_GROUPS) {
-		dev_err(dev, "Engine group >= than max available groups %d",
+		dev_err(dev, "Engine group >= than max available groups %d\n",
 			OTX_CPT_MAX_ENGINE_GROUPS);
 		return -EINVAL;
 	}
@@ -837,7 +837,7 @@ static int otx_cptvf_probe(struct pci_dev *pdev,
 			  cptvf_misc_intr_handler, 0, "CPT VF misc intr",
 			  cptvf);
 	if (err) {
-		dev_err(dev, "Failed to request misc irq");
+		dev_err(dev, "Failed to request misc irq\n");
 		goto free_vectors;
 	}
 
@@ -854,7 +854,7 @@ static int otx_cptvf_probe(struct pci_dev *pdev,
 	cptvf->cqinfo.qchunksize = OTX_CPT_CMD_QCHUNK_SIZE;
 	err = cptvf_sw_init(cptvf, OTX_CPT_CMD_QLEN, OTX_CPT_NUM_QS_PER_VF);
 	if (err) {
-		dev_err(dev, "cptvf_sw_init() failed");
+		dev_err(dev, "cptvf_sw_init() failed\n");
 		goto free_misc_irq;
 	}
 	/* Convey VQ LEN to PF */
@@ -946,7 +946,7 @@ static void otx_cptvf_remove(struct pci_dev *pdev)
 
 	/* Convey DOWN to PF */
 	if (otx_cptvf_send_vf_down(cptvf)) {
-		dev_err(&pdev->dev, "PF not responding to DOWN msg");
+		dev_err(&pdev->dev, "PF not responding to DOWN msg\n");
 	} else {
 		sysfs_remove_group(&pdev->dev.kobj, &otx_cptvf_sysfs_group);
 		otx_cpt_crypto_exit(pdev, THIS_MODULE, cptvf->vftype);
diff --git a/drivers/crypto/marvell/octeontx/otx_cptvf_reqmgr.c b/drivers/crypto/marvell/octeontx/otx_cptvf_reqmgr.c
index df839b880354..239195cccf93 100644
--- a/drivers/crypto/marvell/octeontx/otx_cptvf_reqmgr.c
+++ b/drivers/crypto/marvell/octeontx/otx_cptvf_reqmgr.c
@@ -314,7 +314,7 @@ static int process_request(struct pci_dev *pdev, struct otx_cpt_req_info *req,
 							      GFP_ATOMIC;
 	ret = setup_sgio_list(pdev, &info, req, gfp);
 	if (unlikely(ret)) {
-		dev_err(&pdev->dev, "Setting up SG list failed");
+		dev_err(&pdev->dev, "Setting up SG list failed\n");
 		goto request_cleanup;
 	}
 	cpt_req->dlen = info->dlen;
@@ -410,17 +410,17 @@ int otx_cpt_do_request(struct pci_dev *pdev, struct otx_cpt_req_info *req,
 	struct otx_cptvf *cptvf = pci_get_drvdata(pdev);
 
 	if (!otx_cpt_device_ready(cptvf)) {
-		dev_err(&pdev->dev, "CPT Device is not ready");
+		dev_err(&pdev->dev, "CPT Device is not ready\n");
 		return -ENODEV;
 	}
 
 	if ((cptvf->vftype == OTX_CPT_SE_TYPES) && (!req->ctrl.s.se_req)) {
-		dev_err(&pdev->dev, "CPTVF-%d of SE TYPE got AE request",
+		dev_err(&pdev->dev, "CPTVF-%d of SE TYPE got AE request\n",
 			cptvf->vfid);
 		return -EINVAL;
 	} else if ((cptvf->vftype == OTX_CPT_AE_TYPES) &&
 		   (req->ctrl.s.se_req)) {
-		dev_err(&pdev->dev, "CPTVF-%d of AE TYPE got SE request",
+		dev_err(&pdev->dev, "CPTVF-%d of AE TYPE got SE request\n",
 			cptvf->vfid);
 		return -EINVAL;
 	}
@@ -461,7 +461,7 @@ static int cpt_process_ccode(struct pci_dev *pdev,
 		/* check for timeout */
 		if (time_after_eq(jiffies, cpt_info->time_in +
 				  OTX_CPT_COMMAND_TIMEOUT * HZ))
-			dev_warn(&pdev->dev, "Request timed out 0x%p", req);
+			dev_warn(&pdev->dev, "Request timed out 0x%p\n", req);
 		else if (cpt_info->extra_time < OTX_CPT_TIME_IN_RESET_COUNT) {
 			cpt_info->time_in = jiffies;
 			cpt_info->extra_time++;
diff --git a/drivers/crypto/nx/Makefile b/drivers/crypto/nx/Makefile
index 015155da59c2..bc89a20e5d9d 100644
--- a/drivers/crypto/nx/Makefile
+++ b/drivers/crypto/nx/Makefile
@@ -15,4 +15,4 @@ obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES) += nx-compress-pseries.o nx-compres
 obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV) += nx-compress-powernv.o nx-compress.o
 nx-compress-objs := nx-842.o
 nx-compress-pseries-objs := nx-842-pseries.o
-nx-compress-powernv-objs := nx-842-powernv.o
+nx-compress-powernv-objs := nx-common-powernv.o
diff --git a/drivers/crypto/nx/nx-842-powernv.c b/drivers/crypto/nx/nx-842-powernv.c
deleted file mode 100644
index c037a2403b82..000000000000
--- a/drivers/crypto/nx/nx-842-powernv.c
+++ /dev/null
@@ -1,1062 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Driver for IBM PowerNV 842 compression accelerator
- *
- * Copyright (C) 2015 Dan Streetman, IBM Corp
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "nx-842.h"
-
-#include <linux/timer.h>
-
-#include <asm/prom.h>
-#include <asm/icswx.h>
-#include <asm/vas.h>
-#include <asm/reg.h>
-#include <asm/opal-api.h>
-#include <asm/opal.h>
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>");
-MODULE_DESCRIPTION("842 H/W Compression driver for IBM PowerNV processors");
-MODULE_ALIAS_CRYPTO("842");
-MODULE_ALIAS_CRYPTO("842-nx");
-
-#define WORKMEM_ALIGN	(CRB_ALIGN)
-#define CSB_WAIT_MAX	(5000) /* ms */
-#define VAS_RETRIES	(10)
-
-struct nx842_workmem {
-	/* Below fields must be properly aligned */
-	struct coprocessor_request_block crb; /* CRB_ALIGN align */
-	struct data_descriptor_entry ddl_in[DDL_LEN_MAX]; /* DDE_ALIGN align */
-	struct data_descriptor_entry ddl_out[DDL_LEN_MAX]; /* DDE_ALIGN align */
-	/* Above fields must be properly aligned */
-
-	ktime_t start;
-
-	char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */
-} __packed __aligned(WORKMEM_ALIGN);
-
-struct nx842_coproc {
-	unsigned int chip_id;
-	unsigned int ct;
-	unsigned int ci;	/* Coprocessor instance, used with icswx */
-	struct {
-		struct vas_window *rxwin;
-		int id;
-	} vas;
-	struct list_head list;
-};
-
-/*
- * Send the request to NX engine on the chip for the corresponding CPU
- * where the process is executing. Use with VAS function.
- */
-static DEFINE_PER_CPU(struct vas_window *, cpu_txwin);
-
-/* no cpu hotplug on powernv, so this list never changes after init */
-static LIST_HEAD(nx842_coprocs);
-static unsigned int nx842_ct;	/* used in icswx function */
-
-static int (*nx842_powernv_exec)(const unsigned char *in,
-				unsigned int inlen, unsigned char *out,
-				unsigned int *outlenp, void *workmem, int fc);
-
-/**
- * setup_indirect_dde - Setup an indirect DDE
- *
- * The DDE is setup with the the DDE count, byte count, and address of
- * first direct DDE in the list.
- */
-static void setup_indirect_dde(struct data_descriptor_entry *dde,
-			       struct data_descriptor_entry *ddl,
-			       unsigned int dde_count, unsigned int byte_count)
-{
-	dde->flags = 0;
-	dde->count = dde_count;
-	dde->index = 0;
-	dde->length = cpu_to_be32(byte_count);
-	dde->address = cpu_to_be64(nx842_get_pa(ddl));
-}
-
-/**
- * setup_direct_dde - Setup single DDE from buffer
- *
- * The DDE is setup with the buffer and length.  The buffer must be properly
- * aligned.  The used length is returned.
- * Returns:
- *   N    Successfully set up DDE with N bytes
- */
-static unsigned int setup_direct_dde(struct data_descriptor_entry *dde,
-				     unsigned long pa, unsigned int len)
-{
-	unsigned int l = min_t(unsigned int, len, LEN_ON_PAGE(pa));
-
-	dde->flags = 0;
-	dde->count = 0;
-	dde->index = 0;
-	dde->length = cpu_to_be32(l);
-	dde->address = cpu_to_be64(pa);
-
-	return l;
-}
-
-/**
- * setup_ddl - Setup DDL from buffer
- *
- * Returns:
- *   0		Successfully set up DDL
- */
-static int setup_ddl(struct data_descriptor_entry *dde,
-		     struct data_descriptor_entry *ddl,
-		     unsigned char *buf, unsigned int len,
-		     bool in)
-{
-	unsigned long pa = nx842_get_pa(buf);
-	int i, ret, total_len = len;
-
-	if (!IS_ALIGNED(pa, DDE_BUFFER_ALIGN)) {
-		pr_debug("%s buffer pa 0x%lx not 0x%x-byte aligned\n",
-			 in ? "input" : "output", pa, DDE_BUFFER_ALIGN);
-		return -EINVAL;
-	}
-
-	/* only need to check last mult; since buffer must be
-	 * DDE_BUFFER_ALIGN aligned, and that is a multiple of
-	 * DDE_BUFFER_SIZE_MULT, and pre-last page DDE buffers
-	 * are guaranteed a multiple of DDE_BUFFER_SIZE_MULT.
-	 */
-	if (len % DDE_BUFFER_LAST_MULT) {
-		pr_debug("%s buffer len 0x%x not a multiple of 0x%x\n",
-			 in ? "input" : "output", len, DDE_BUFFER_LAST_MULT);
-		if (in)
-			return -EINVAL;
-		len = round_down(len, DDE_BUFFER_LAST_MULT);
-	}
-
-	/* use a single direct DDE */
-	if (len <= LEN_ON_PAGE(pa)) {
-		ret = setup_direct_dde(dde, pa, len);
-		WARN_ON(ret < len);
-		return 0;
-	}
-
-	/* use the DDL */
-	for (i = 0; i < DDL_LEN_MAX && len > 0; i++) {
-		ret = setup_direct_dde(&ddl[i], pa, len);
-		buf += ret;
-		len -= ret;
-		pa = nx842_get_pa(buf);
-	}
-
-	if (len > 0) {
-		pr_debug("0x%x total %s bytes 0x%x too many for DDL.\n",
-			 total_len, in ? "input" : "output", len);
-		if (in)
-			return -EMSGSIZE;
-		total_len -= len;
-	}
-	setup_indirect_dde(dde, ddl, i, total_len);
-
-	return 0;
-}
-
-#define CSB_ERR(csb, msg, ...)					\
-	pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n",	\
-	       ##__VA_ARGS__, (csb)->flags,			\
-	       (csb)->cs, (csb)->cc, (csb)->ce,			\
-	       be32_to_cpu((csb)->count))
-
-#define CSB_ERR_ADDR(csb, msg, ...)				\
-	CSB_ERR(csb, msg " at %lx", ##__VA_ARGS__,		\
-		(unsigned long)be64_to_cpu((csb)->address))
-
-/**
- * wait_for_csb
- */
-static int wait_for_csb(struct nx842_workmem *wmem,
-			struct coprocessor_status_block *csb)
-{
-	ktime_t start = wmem->start, now = ktime_get();
-	ktime_t timeout = ktime_add_ms(start, CSB_WAIT_MAX);
-
-	while (!(READ_ONCE(csb->flags) & CSB_V)) {
-		cpu_relax();
-		now = ktime_get();
-		if (ktime_after(now, timeout))
-			break;
-	}
-
-	/* hw has updated csb and output buffer */
-	barrier();
-
-	/* check CSB flags */
-	if (!(csb->flags & CSB_V)) {
-		CSB_ERR(csb, "CSB still not valid after %ld us, giving up",
-			(long)ktime_us_delta(now, start));
-		return -ETIMEDOUT;
-	}
-	if (csb->flags & CSB_F) {
-		CSB_ERR(csb, "Invalid CSB format");
-		return -EPROTO;
-	}
-	if (csb->flags & CSB_CH) {
-		CSB_ERR(csb, "Invalid CSB chaining state");
-		return -EPROTO;
-	}
-
-	/* verify CSB completion sequence is 0 */
-	if (csb->cs) {
-		CSB_ERR(csb, "Invalid CSB completion sequence");
-		return -EPROTO;
-	}
-
-	/* check CSB Completion Code */
-	switch (csb->cc) {
-	/* no error */
-	case CSB_CC_SUCCESS:
-		break;
-	case CSB_CC_TPBC_GT_SPBC:
-		/* not an error, but the compressed data is
-		 * larger than the uncompressed data :(
-		 */
-		break;
-
-	/* input data errors */
-	case CSB_CC_OPERAND_OVERLAP:
-		/* input and output buffers overlap */
-		CSB_ERR(csb, "Operand Overlap error");
-		return -EINVAL;
-	case CSB_CC_INVALID_OPERAND:
-		CSB_ERR(csb, "Invalid operand");
-		return -EINVAL;
-	case CSB_CC_NOSPC:
-		/* output buffer too small */
-		return -ENOSPC;
-	case CSB_CC_ABORT:
-		CSB_ERR(csb, "Function aborted");
-		return -EINTR;
-	case CSB_CC_CRC_MISMATCH:
-		CSB_ERR(csb, "CRC mismatch");
-		return -EINVAL;
-	case CSB_CC_TEMPL_INVALID:
-		CSB_ERR(csb, "Compressed data template invalid");
-		return -EINVAL;
-	case CSB_CC_TEMPL_OVERFLOW:
-		CSB_ERR(csb, "Compressed data template shows data past end");
-		return -EINVAL;
-	case CSB_CC_EXCEED_BYTE_COUNT:	/* P9 or later */
-		/*
-		 * DDE byte count exceeds the limit specified in Maximum
-		 * byte count register.
-		 */
-		CSB_ERR(csb, "DDE byte count exceeds the limit");
-		return -EINVAL;
-
-	/* these should not happen */
-	case CSB_CC_INVALID_ALIGN:
-		/* setup_ddl should have detected this */
-		CSB_ERR_ADDR(csb, "Invalid alignment");
-		return -EINVAL;
-	case CSB_CC_DATA_LENGTH:
-		/* setup_ddl should have detected this */
-		CSB_ERR(csb, "Invalid data length");
-		return -EINVAL;
-	case CSB_CC_WR_TRANSLATION:
-	case CSB_CC_TRANSLATION:
-	case CSB_CC_TRANSLATION_DUP1:
-	case CSB_CC_TRANSLATION_DUP2:
-	case CSB_CC_TRANSLATION_DUP3:
-	case CSB_CC_TRANSLATION_DUP4:
-	case CSB_CC_TRANSLATION_DUP5:
-	case CSB_CC_TRANSLATION_DUP6:
-		/* should not happen, we use physical addrs */
-		CSB_ERR_ADDR(csb, "Translation error");
-		return -EPROTO;
-	case CSB_CC_WR_PROTECTION:
-	case CSB_CC_PROTECTION:
-	case CSB_CC_PROTECTION_DUP1:
-	case CSB_CC_PROTECTION_DUP2:
-	case CSB_CC_PROTECTION_DUP3:
-	case CSB_CC_PROTECTION_DUP4:
-	case CSB_CC_PROTECTION_DUP5:
-	case CSB_CC_PROTECTION_DUP6:
-		/* should not happen, we use physical addrs */
-		CSB_ERR_ADDR(csb, "Protection error");
-		return -EPROTO;
-	case CSB_CC_PRIVILEGE:
-		/* shouldn't happen, we're in HYP mode */
-		CSB_ERR(csb, "Insufficient Privilege error");
-		return -EPROTO;
-	case CSB_CC_EXCESSIVE_DDE:
-		/* shouldn't happen, setup_ddl doesn't use many dde's */
-		CSB_ERR(csb, "Too many DDEs in DDL");
-		return -EINVAL;
-	case CSB_CC_TRANSPORT:
-	case CSB_CC_INVALID_CRB:	/* P9 or later */
-		/* shouldn't happen, we setup CRB correctly */
-		CSB_ERR(csb, "Invalid CRB");
-		return -EINVAL;
-	case CSB_CC_INVALID_DDE:	/* P9 or later */
-		/*
-		 * shouldn't happen, setup_direct/indirect_dde creates
-		 * DDE right
-		 */
-		CSB_ERR(csb, "Invalid DDE");
-		return -EINVAL;
-	case CSB_CC_SEGMENTED_DDL:
-		/* shouldn't happen, setup_ddl creates DDL right */
-		CSB_ERR(csb, "Segmented DDL error");
-		return -EINVAL;
-	case CSB_CC_DDE_OVERFLOW:
-		/* shouldn't happen, setup_ddl creates DDL right */
-		CSB_ERR(csb, "DDE overflow error");
-		return -EINVAL;
-	case CSB_CC_SESSION:
-		/* should not happen with ICSWX */
-		CSB_ERR(csb, "Session violation error");
-		return -EPROTO;
-	case CSB_CC_CHAIN:
-		/* should not happen, we don't use chained CRBs */
-		CSB_ERR(csb, "Chained CRB error");
-		return -EPROTO;
-	case CSB_CC_SEQUENCE:
-		/* should not happen, we don't use chained CRBs */
-		CSB_ERR(csb, "CRB sequence number error");
-		return -EPROTO;
-	case CSB_CC_UNKNOWN_CODE:
-		CSB_ERR(csb, "Unknown subfunction code");
-		return -EPROTO;
-
-	/* hardware errors */
-	case CSB_CC_RD_EXTERNAL:
-	case CSB_CC_RD_EXTERNAL_DUP1:
-	case CSB_CC_RD_EXTERNAL_DUP2:
-	case CSB_CC_RD_EXTERNAL_DUP3:
-		CSB_ERR_ADDR(csb, "Read error outside coprocessor");
-		return -EPROTO;
-	case CSB_CC_WR_EXTERNAL:
-		CSB_ERR_ADDR(csb, "Write error outside coprocessor");
-		return -EPROTO;
-	case CSB_CC_INTERNAL:
-		CSB_ERR(csb, "Internal error in coprocessor");
-		return -EPROTO;
-	case CSB_CC_PROVISION:
-		CSB_ERR(csb, "Storage provision error");
-		return -EPROTO;
-	case CSB_CC_HW:
-		CSB_ERR(csb, "Correctable hardware error");
-		return -EPROTO;
-	case CSB_CC_HW_EXPIRED_TIMER:	/* P9 or later */
-		CSB_ERR(csb, "Job did not finish within allowed time");
-		return -EPROTO;
-
-	default:
-		CSB_ERR(csb, "Invalid CC %d", csb->cc);
-		return -EPROTO;
-	}
-
-	/* check Completion Extension state */
-	if (csb->ce & CSB_CE_TERMINATION) {
-		CSB_ERR(csb, "CSB request was terminated");
-		return -EPROTO;
-	}
-	if (csb->ce & CSB_CE_INCOMPLETE) {
-		CSB_ERR(csb, "CSB request not complete");
-		return -EPROTO;
-	}
-	if (!(csb->ce & CSB_CE_TPBC)) {
-		CSB_ERR(csb, "TPBC not provided, unknown target length");
-		return -EPROTO;
-	}
-
-	/* successful completion */
-	pr_debug_ratelimited("Processed %u bytes in %lu us\n",
-			     be32_to_cpu(csb->count),
-			     (unsigned long)ktime_us_delta(now, start));
-
-	return 0;
-}
-
-static int nx842_config_crb(const unsigned char *in, unsigned int inlen,
-			unsigned char *out, unsigned int outlen,
-			struct nx842_workmem *wmem)
-{
-	struct coprocessor_request_block *crb;
-	struct coprocessor_status_block *csb;
-	u64 csb_addr;
-	int ret;
-
-	crb = &wmem->crb;
-	csb = &crb->csb;
-
-	/* Clear any previous values */
-	memset(crb, 0, sizeof(*crb));
-
-	/* set up DDLs */
-	ret = setup_ddl(&crb->source, wmem->ddl_in,
-			(unsigned char *)in, inlen, true);
-	if (ret)
-		return ret;
-
-	ret = setup_ddl(&crb->target, wmem->ddl_out,
-			out, outlen, false);
-	if (ret)
-		return ret;
-
-	/* set up CRB's CSB addr */
-	csb_addr = nx842_get_pa(csb) & CRB_CSB_ADDRESS;
-	csb_addr |= CRB_CSB_AT; /* Addrs are phys */
-	crb->csb_addr = cpu_to_be64(csb_addr);
-
-	return 0;
-}
-
-/**
- * nx842_exec_icswx - compress/decompress data using the 842 algorithm
- *
- * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
- * This compresses or decompresses the provided input buffer into the provided
- * output buffer.
- *
- * Upon return from this function @outlen contains the length of the
- * output data.  If there is an error then @outlen will be 0 and an
- * error will be specified by the return code from this function.
- *
- * The @workmem buffer should only be used by one function call at a time.
- *
- * @in: input buffer pointer
- * @inlen: input buffer size
- * @out: output buffer pointer
- * @outlenp: output buffer size pointer
- * @workmem: working memory buffer pointer, size determined by
- *           nx842_powernv_driver.workmem_size
- * @fc: function code, see CCW Function Codes in nx-842.h
- *
- * Returns:
- *   0		Success, output of length @outlenp stored in the buffer at @out
- *   -ENODEV	Hardware unavailable
- *   -ENOSPC	Output buffer is to small
- *   -EMSGSIZE	Input buffer too large
- *   -EINVAL	buffer constraints do not fix nx842_constraints
- *   -EPROTO	hardware error during operation
- *   -ETIMEDOUT	hardware did not complete operation in reasonable time
- *   -EINTR	operation was aborted
- */
-static int nx842_exec_icswx(const unsigned char *in, unsigned int inlen,
-				  unsigned char *out, unsigned int *outlenp,
-				  void *workmem, int fc)
-{
-	struct coprocessor_request_block *crb;
-	struct coprocessor_status_block *csb;
-	struct nx842_workmem *wmem;
-	int ret;
-	u32 ccw;
-	unsigned int outlen = *outlenp;
-
-	wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
-
-	*outlenp = 0;
-
-	/* shoudn't happen, we don't load without a coproc */
-	if (!nx842_ct) {
-		pr_err_ratelimited("coprocessor CT is 0");
-		return -ENODEV;
-	}
-
-	ret = nx842_config_crb(in, inlen, out, outlen, wmem);
-	if (ret)
-		return ret;
-
-	crb = &wmem->crb;
-	csb = &crb->csb;
-
-	/* set up CCW */
-	ccw = 0;
-	ccw = SET_FIELD(CCW_CT, ccw, nx842_ct);
-	ccw = SET_FIELD(CCW_CI_842, ccw, 0); /* use 0 for hw auto-selection */
-	ccw = SET_FIELD(CCW_FC_842, ccw, fc);
-
-	wmem->start = ktime_get();
-
-	/* do ICSWX */
-	ret = icswx(cpu_to_be32(ccw), crb);
-
-	pr_debug_ratelimited("icswx CR %x ccw %x crb->ccw %x\n", ret,
-			     (unsigned int)ccw,
-			     (unsigned int)be32_to_cpu(crb->ccw));
-
-	/*
-	 * NX842 coprocessor sets 3rd bit in CR register with XER[S0].
-	 * XER[S0] is the integer summary overflow bit which is nothing
-	 * to do NX. Since this bit can be set with other return values,
-	 * mask this bit.
-	 */
-	ret &= ~ICSWX_XERS0;
-
-	switch (ret) {
-	case ICSWX_INITIATED:
-		ret = wait_for_csb(wmem, csb);
-		break;
-	case ICSWX_BUSY:
-		pr_debug_ratelimited("842 Coprocessor busy\n");
-		ret = -EBUSY;
-		break;
-	case ICSWX_REJECTED:
-		pr_err_ratelimited("ICSWX rejected\n");
-		ret = -EPROTO;
-		break;
-	}
-
-	if (!ret)
-		*outlenp = be32_to_cpu(csb->count);
-
-	return ret;
-}
-
-/**
- * nx842_exec_vas - compress/decompress data using the 842 algorithm
- *
- * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
- * This compresses or decompresses the provided input buffer into the provided
- * output buffer.
- *
- * Upon return from this function @outlen contains the length of the
- * output data.  If there is an error then @outlen will be 0 and an
- * error will be specified by the return code from this function.
- *
- * The @workmem buffer should only be used by one function call at a time.
- *
- * @in: input buffer pointer
- * @inlen: input buffer size
- * @out: output buffer pointer
- * @outlenp: output buffer size pointer
- * @workmem: working memory buffer pointer, size determined by
- *           nx842_powernv_driver.workmem_size
- * @fc: function code, see CCW Function Codes in nx-842.h
- *
- * Returns:
- *   0		Success, output of length @outlenp stored in the buffer
- *		at @out
- *   -ENODEV	Hardware unavailable
- *   -ENOSPC	Output buffer is to small
- *   -EMSGSIZE	Input buffer too large
- *   -EINVAL	buffer constraints do not fix nx842_constraints
- *   -EPROTO	hardware error during operation
- *   -ETIMEDOUT	hardware did not complete operation in reasonable time
- *   -EINTR	operation was aborted
- */
-static int nx842_exec_vas(const unsigned char *in, unsigned int inlen,
-				  unsigned char *out, unsigned int *outlenp,
-				  void *workmem, int fc)
-{
-	struct coprocessor_request_block *crb;
-	struct coprocessor_status_block *csb;
-	struct nx842_workmem *wmem;
-	struct vas_window *txwin;
-	int ret, i = 0;
-	u32 ccw;
-	unsigned int outlen = *outlenp;
-
-	wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
-
-	*outlenp = 0;
-
-	crb = &wmem->crb;
-	csb = &crb->csb;
-
-	ret = nx842_config_crb(in, inlen, out, outlen, wmem);
-	if (ret)
-		return ret;
-
-	ccw = 0;
-	ccw = SET_FIELD(CCW_FC_842, ccw, fc);
-	crb->ccw = cpu_to_be32(ccw);
-
-	do {
-		wmem->start = ktime_get();
-		preempt_disable();
-		txwin = this_cpu_read(cpu_txwin);
-
-		/*
-		 * VAS copy CRB into L2 cache. Refer <asm/vas.h>.
-		 * @crb and @offset.
-		 */
-		vas_copy_crb(crb, 0);
-
-		/*
-		 * VAS paste previously copied CRB to NX.
-		 * @txwin, @offset and @last (must be true).
-		 */
-		ret = vas_paste_crb(txwin, 0, 1);
-		preempt_enable();
-		/*
-		 * Retry copy/paste function for VAS failures.
-		 */
-	} while (ret && (i++ < VAS_RETRIES));
-
-	if (ret) {
-		pr_err_ratelimited("VAS copy/paste failed\n");
-		return ret;
-	}
-
-	ret = wait_for_csb(wmem, csb);
-	if (!ret)
-		*outlenp = be32_to_cpu(csb->count);
-
-	return ret;
-}
-
-/**
- * nx842_powernv_compress - Compress data using the 842 algorithm
- *
- * Compression provided by the NX842 coprocessor on IBM PowerNV systems.
- * The input buffer is compressed and the result is stored in the
- * provided output buffer.
- *
- * Upon return from this function @outlen contains the length of the
- * compressed data.  If there is an error then @outlen will be 0 and an
- * error will be specified by the return code from this function.
- *
- * @in: input buffer pointer
- * @inlen: input buffer size
- * @out: output buffer pointer
- * @outlenp: output buffer size pointer
- * @workmem: working memory buffer pointer, size determined by
- *           nx842_powernv_driver.workmem_size
- *
- * Returns: see @nx842_powernv_exec()
- */
-static int nx842_powernv_compress(const unsigned char *in, unsigned int inlen,
-				  unsigned char *out, unsigned int *outlenp,
-				  void *wmem)
-{
-	return nx842_powernv_exec(in, inlen, out, outlenp,
-				      wmem, CCW_FC_842_COMP_CRC);
-}
-
-/**
- * nx842_powernv_decompress - Decompress data using the 842 algorithm
- *
- * Decompression provided by the NX842 coprocessor on IBM PowerNV systems.
- * The input buffer is decompressed and the result is stored in the
- * provided output buffer.
- *
- * Upon return from this function @outlen contains the length of the
- * decompressed data.  If there is an error then @outlen will be 0 and an
- * error will be specified by the return code from this function.
- *
- * @in: input buffer pointer
- * @inlen: input buffer size
- * @out: output buffer pointer
- * @outlenp: output buffer size pointer
- * @workmem: working memory buffer pointer, size determined by
- *           nx842_powernv_driver.workmem_size
- *
- * Returns: see @nx842_powernv_exec()
- */
-static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen,
-				    unsigned char *out, unsigned int *outlenp,
-				    void *wmem)
-{
-	return nx842_powernv_exec(in, inlen, out, outlenp,
-				      wmem, CCW_FC_842_DECOMP_CRC);
-}
-
-static inline void nx842_add_coprocs_list(struct nx842_coproc *coproc,
-					int chipid)
-{
-	coproc->chip_id = chipid;
-	INIT_LIST_HEAD(&coproc->list);
-	list_add(&coproc->list, &nx842_coprocs);
-}
-
-static struct vas_window *nx842_alloc_txwin(struct nx842_coproc *coproc)
-{
-	struct vas_window *txwin = NULL;
-	struct vas_tx_win_attr txattr;
-
-	/*
-	 * Kernel requests will be high priority. So open send
-	 * windows only for high priority RxFIFO entries.
-	 */
-	vas_init_tx_win_attr(&txattr, coproc->ct);
-	txattr.lpid = 0;	/* lpid is 0 for kernel requests */
-	txattr.pid = 0;		/* pid is 0 for kernel requests */
-
-	/*
-	 * Open a VAS send window which is used to send request to NX.
-	 */
-	txwin = vas_tx_win_open(coproc->vas.id, coproc->ct, &txattr);
-	if (IS_ERR(txwin))
-		pr_err("ibm,nx-842: Can not open TX window: %ld\n",
-				PTR_ERR(txwin));
-
-	return txwin;
-}
-
-/*
- * Identify chip ID for each CPU, open send wndow for the corresponding NX
- * engine and save txwin in percpu cpu_txwin.
- * cpu_txwin is used in copy/paste operation for each compression /
- * decompression request.
- */
-static int nx842_open_percpu_txwins(void)
-{
-	struct nx842_coproc *coproc, *n;
-	unsigned int i, chip_id;
-
-	for_each_possible_cpu(i) {
-		struct vas_window *txwin = NULL;
-
-		chip_id = cpu_to_chip_id(i);
-
-		list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
-			/*
-			 * Kernel requests use only high priority FIFOs. So
-			 * open send windows for these FIFOs.
-			 */
-
-			if (coproc->ct != VAS_COP_TYPE_842_HIPRI)
-				continue;
-
-			if (coproc->chip_id == chip_id) {
-				txwin = nx842_alloc_txwin(coproc);
-				if (IS_ERR(txwin))
-					return PTR_ERR(txwin);
-
-				per_cpu(cpu_txwin, i) = txwin;
-				break;
-			}
-		}
-
-		if (!per_cpu(cpu_txwin, i)) {
-			/* shouldn't happen, Each chip will have NX engine */
-			pr_err("NX engine is not available for CPU %d\n", i);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
-					int vasid, int *ct)
-{
-	struct vas_window *rxwin = NULL;
-	struct vas_rx_win_attr rxattr;
-	struct nx842_coproc *coproc;
-	u32 lpid, pid, tid, fifo_size;
-	u64 rx_fifo;
-	const char *priority;
-	int ret;
-
-	ret = of_property_read_u64(dn, "rx-fifo-address", &rx_fifo);
-	if (ret) {
-		pr_err("Missing rx-fifo-address property\n");
-		return ret;
-	}
-
-	ret = of_property_read_u32(dn, "rx-fifo-size", &fifo_size);
-	if (ret) {
-		pr_err("Missing rx-fifo-size property\n");
-		return ret;
-	}
-
-	ret = of_property_read_u32(dn, "lpid", &lpid);
-	if (ret) {
-		pr_err("Missing lpid property\n");
-		return ret;
-	}
-
-	ret = of_property_read_u32(dn, "pid", &pid);
-	if (ret) {
-		pr_err("Missing pid property\n");
-		return ret;
-	}
-
-	ret = of_property_read_u32(dn, "tid", &tid);
-	if (ret) {
-		pr_err("Missing tid property\n");
-		return ret;
-	}
-
-	ret = of_property_read_string(dn, "priority", &priority);
-	if (ret) {
-		pr_err("Missing priority property\n");
-		return ret;
-	}
-
-	coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
-	if (!coproc)
-		return -ENOMEM;
-
-	if (!strcmp(priority, "High"))
-		coproc->ct = VAS_COP_TYPE_842_HIPRI;
-	else if (!strcmp(priority, "Normal"))
-		coproc->ct = VAS_COP_TYPE_842;
-	else {
-		pr_err("Invalid RxFIFO priority value\n");
-		ret =  -EINVAL;
-		goto err_out;
-	}
-
-	vas_init_rx_win_attr(&rxattr, coproc->ct);
-	rxattr.rx_fifo = (void *)rx_fifo;
-	rxattr.rx_fifo_size = fifo_size;
-	rxattr.lnotify_lpid = lpid;
-	rxattr.lnotify_pid = pid;
-	rxattr.lnotify_tid = tid;
-	/*
-	 * Maximum RX window credits can not be more than #CRBs in
-	 * RxFIFO. Otherwise, can get checkstop if RxFIFO overruns.
-	 */
-	rxattr.wcreds_max = fifo_size / CRB_SIZE;
-
-	/*
-	 * Open a VAS receice window which is used to configure RxFIFO
-	 * for NX.
-	 */
-	rxwin = vas_rx_win_open(vasid, coproc->ct, &rxattr);
-	if (IS_ERR(rxwin)) {
-		ret = PTR_ERR(rxwin);
-		pr_err("setting RxFIFO with VAS failed: %d\n",
-			ret);
-		goto err_out;
-	}
-
-	coproc->vas.rxwin = rxwin;
-	coproc->vas.id = vasid;
-	nx842_add_coprocs_list(coproc, chip_id);
-
-	/*
-	 * (lpid, pid, tid) combination has to be unique for each
-	 * coprocessor instance in the system. So to make it
-	 * unique, skiboot uses coprocessor type such as 842 or
-	 * GZIP for pid and provides this value to kernel in pid
-	 * device-tree property.
-	 */
-	*ct = pid;
-
-	return 0;
-
-err_out:
-	kfree(coproc);
-	return ret;
-}
-
-
-static int __init nx842_powernv_probe_vas(struct device_node *pn)
-{
-	struct device_node *dn;
-	int chip_id, vasid, ret = 0;
-	int nx_fifo_found = 0;
-	int uninitialized_var(ct);
-
-	chip_id = of_get_ibm_chip_id(pn);
-	if (chip_id < 0) {
-		pr_err("ibm,chip-id missing\n");
-		return -EINVAL;
-	}
-
-	vasid = chip_to_vas_id(chip_id);
-	if (vasid < 0) {
-		pr_err("Unable to map chip_id %d to vasid\n", chip_id);
-		return -EINVAL;
-	}
-
-	for_each_child_of_node(pn, dn) {
-		if (of_device_is_compatible(dn, "ibm,p9-nx-842")) {
-			ret = vas_cfg_coproc_info(dn, chip_id, vasid, &ct);
-			if (ret) {
-				of_node_put(dn);
-				return ret;
-			}
-			nx_fifo_found++;
-		}
-	}
-
-	if (!nx_fifo_found) {
-		pr_err("NX842 FIFO nodes are missing\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Initialize NX instance for both high and normal priority FIFOs.
-	 */
-	if (opal_check_token(OPAL_NX_COPROC_INIT)) {
-		ret = opal_nx_coproc_init(chip_id, ct);
-		if (ret) {
-			pr_err("Failed to initialize NX for chip(%d): %d\n",
-				chip_id, ret);
-			ret = opal_error_code(ret);
-		}
-	} else
-		pr_warn("Firmware doesn't support NX initialization\n");
-
-	return ret;
-}
-
-static int __init nx842_powernv_probe(struct device_node *dn)
-{
-	struct nx842_coproc *coproc;
-	unsigned int ct, ci;
-	int chip_id;
-
-	chip_id = of_get_ibm_chip_id(dn);
-	if (chip_id < 0) {
-		pr_err("ibm,chip-id missing\n");
-		return -EINVAL;
-	}
-
-	if (of_property_read_u32(dn, "ibm,842-coprocessor-type", &ct)) {
-		pr_err("ibm,842-coprocessor-type missing\n");
-		return -EINVAL;
-	}
-
-	if (of_property_read_u32(dn, "ibm,842-coprocessor-instance", &ci)) {
-		pr_err("ibm,842-coprocessor-instance missing\n");
-		return -EINVAL;
-	}
-
-	coproc = kmalloc(sizeof(*coproc), GFP_KERNEL);
-	if (!coproc)
-		return -ENOMEM;
-
-	coproc->ct = ct;
-	coproc->ci = ci;
-	nx842_add_coprocs_list(coproc, chip_id);
-
-	pr_info("coprocessor found on chip %d, CT %d CI %d\n", chip_id, ct, ci);
-
-	if (!nx842_ct)
-		nx842_ct = ct;
-	else if (nx842_ct != ct)
-		pr_err("NX842 chip %d, CT %d != first found CT %d\n",
-		       chip_id, ct, nx842_ct);
-
-	return 0;
-}
-
-static void nx842_delete_coprocs(void)
-{
-	struct nx842_coproc *coproc, *n;
-	struct vas_window *txwin;
-	int i;
-
-	/*
-	 * close percpu txwins that are opened for the corresponding coproc.
-	 */
-	for_each_possible_cpu(i) {
-		txwin = per_cpu(cpu_txwin, i);
-		if (txwin)
-			vas_win_close(txwin);
-
-		per_cpu(cpu_txwin, i) = 0;
-	}
-
-	list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
-		if (coproc->vas.rxwin)
-			vas_win_close(coproc->vas.rxwin);
-
-		list_del(&coproc->list);
-		kfree(coproc);
-	}
-}
-
-static struct nx842_constraints nx842_powernv_constraints = {
-	.alignment =	DDE_BUFFER_ALIGN,
-	.multiple =	DDE_BUFFER_LAST_MULT,
-	.minimum =	DDE_BUFFER_LAST_MULT,
-	.maximum =	(DDL_LEN_MAX - 1) * PAGE_SIZE,
-};
-
-static struct nx842_driver nx842_powernv_driver = {
-	.name =		KBUILD_MODNAME,
-	.owner =	THIS_MODULE,
-	.workmem_size =	sizeof(struct nx842_workmem),
-	.constraints =	&nx842_powernv_constraints,
-	.compress =	nx842_powernv_compress,
-	.decompress =	nx842_powernv_decompress,
-};
-
-static int nx842_powernv_crypto_init(struct crypto_tfm *tfm)
-{
-	return nx842_crypto_init(tfm, &nx842_powernv_driver);
-}
-
-static struct crypto_alg nx842_powernv_alg = {
-	.cra_name		= "842",
-	.cra_driver_name	= "842-nx",
-	.cra_priority		= 300,
-	.cra_flags		= CRYPTO_ALG_TYPE_COMPRESS,
-	.cra_ctxsize		= sizeof(struct nx842_crypto_ctx),
-	.cra_module		= THIS_MODULE,
-	.cra_init		= nx842_powernv_crypto_init,
-	.cra_exit		= nx842_crypto_exit,
-	.cra_u			= { .compress = {
-	.coa_compress		= nx842_crypto_compress,
-	.coa_decompress		= nx842_crypto_decompress } }
-};
-
-static __init int nx842_powernv_init(void)
-{
-	struct device_node *dn;
-	int ret;
-
-	/* verify workmem size/align restrictions */
-	BUILD_BUG_ON(WORKMEM_ALIGN % CRB_ALIGN);
-	BUILD_BUG_ON(CRB_ALIGN % DDE_ALIGN);
-	BUILD_BUG_ON(CRB_SIZE % DDE_ALIGN);
-	/* verify buffer size/align restrictions */
-	BUILD_BUG_ON(PAGE_SIZE % DDE_BUFFER_ALIGN);
-	BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT);
-	BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT);
-
-	for_each_compatible_node(dn, NULL, "ibm,power9-nx") {
-		ret = nx842_powernv_probe_vas(dn);
-		if (ret) {
-			nx842_delete_coprocs();
-			of_node_put(dn);
-			return ret;
-		}
-	}
-
-	if (list_empty(&nx842_coprocs)) {
-		for_each_compatible_node(dn, NULL, "ibm,power-nx")
-			nx842_powernv_probe(dn);
-
-		if (!nx842_ct)
-			return -ENODEV;
-
-		nx842_powernv_exec = nx842_exec_icswx;
-	} else {
-		ret = nx842_open_percpu_txwins();
-		if (ret) {
-			nx842_delete_coprocs();
-			return ret;
-		}
-
-		nx842_powernv_exec = nx842_exec_vas;
-	}
-
-	ret = crypto_register_alg(&nx842_powernv_alg);
-	if (ret) {
-		nx842_delete_coprocs();
-		return ret;
-	}
-
-	return 0;
-}
-module_init(nx842_powernv_init);
-
-static void __exit nx842_powernv_exit(void)
-{
-	crypto_unregister_alg(&nx842_powernv_alg);
-
-	nx842_delete_coprocs();
-}
-module_exit(nx842_powernv_exit);
diff --git a/drivers/crypto/nx/nx-common-powernv.c b/drivers/crypto/nx/nx-common-powernv.c
new file mode 100644
index 000000000000..13c65deda8e9
--- /dev/null
+++ b/drivers/crypto/nx/nx-common-powernv.c
@@ -0,0 +1,1136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for IBM PowerNV compression accelerator
+ *
+ * Copyright (C) 2015 Dan Streetman, IBM Corp
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "nx-842.h"
+
+#include <linux/timer.h>
+
+#include <asm/prom.h>
+#include <asm/icswx.h>
+#include <asm/vas.h>
+#include <asm/reg.h>
+#include <asm/opal-api.h>
+#include <asm/opal.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>");
+MODULE_DESCRIPTION("H/W Compression driver for IBM PowerNV processors");
+MODULE_ALIAS_CRYPTO("842");
+MODULE_ALIAS_CRYPTO("842-nx");
+
+#define WORKMEM_ALIGN	(CRB_ALIGN)
+#define CSB_WAIT_MAX	(5000) /* ms */
+#define VAS_RETRIES	(10)
+
+struct nx842_workmem {
+	/* Below fields must be properly aligned */
+	struct coprocessor_request_block crb; /* CRB_ALIGN align */
+	struct data_descriptor_entry ddl_in[DDL_LEN_MAX]; /* DDE_ALIGN align */
+	struct data_descriptor_entry ddl_out[DDL_LEN_MAX]; /* DDE_ALIGN align */
+	/* Above fields must be properly aligned */
+
+	ktime_t start;
+
+	char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */
+} __packed __aligned(WORKMEM_ALIGN);
+
+struct nx_coproc {
+	unsigned int chip_id;
+	unsigned int ct;	/* Can be 842 or GZIP high/normal*/
+	unsigned int ci;	/* Coprocessor instance, used with icswx */
+	struct {
+		struct vas_window *rxwin;
+		int id;
+	} vas;
+	struct list_head list;
+};
+
+/*
+ * Send the request to NX engine on the chip for the corresponding CPU
+ * where the process is executing. Use with VAS function.
+ */
+static DEFINE_PER_CPU(struct vas_window *, cpu_txwin);
+
+/* no cpu hotplug on powernv, so this list never changes after init */
+static LIST_HEAD(nx_coprocs);
+static unsigned int nx842_ct;	/* used in icswx function */
+
+/*
+ * Using same values as in skiboot or coprocessor type representing
+ * in NX workbook.
+ */
+#define NX_CT_GZIP	(2)	/* on P9 and later */
+#define NX_CT_842	(3)
+
+static int (*nx842_powernv_exec)(const unsigned char *in,
+				unsigned int inlen, unsigned char *out,
+				unsigned int *outlenp, void *workmem, int fc);
+
+/**
+ * setup_indirect_dde - Setup an indirect DDE
+ *
+ * The DDE is setup with the the DDE count, byte count, and address of
+ * first direct DDE in the list.
+ */
+static void setup_indirect_dde(struct data_descriptor_entry *dde,
+			       struct data_descriptor_entry *ddl,
+			       unsigned int dde_count, unsigned int byte_count)
+{
+	dde->flags = 0;
+	dde->count = dde_count;
+	dde->index = 0;
+	dde->length = cpu_to_be32(byte_count);
+	dde->address = cpu_to_be64(nx842_get_pa(ddl));
+}
+
+/**
+ * setup_direct_dde - Setup single DDE from buffer
+ *
+ * The DDE is setup with the buffer and length.  The buffer must be properly
+ * aligned.  The used length is returned.
+ * Returns:
+ *   N    Successfully set up DDE with N bytes
+ */
+static unsigned int setup_direct_dde(struct data_descriptor_entry *dde,
+				     unsigned long pa, unsigned int len)
+{
+	unsigned int l = min_t(unsigned int, len, LEN_ON_PAGE(pa));
+
+	dde->flags = 0;
+	dde->count = 0;
+	dde->index = 0;
+	dde->length = cpu_to_be32(l);
+	dde->address = cpu_to_be64(pa);
+
+	return l;
+}
+
+/**
+ * setup_ddl - Setup DDL from buffer
+ *
+ * Returns:
+ *   0		Successfully set up DDL
+ */
+static int setup_ddl(struct data_descriptor_entry *dde,
+		     struct data_descriptor_entry *ddl,
+		     unsigned char *buf, unsigned int len,
+		     bool in)
+{
+	unsigned long pa = nx842_get_pa(buf);
+	int i, ret, total_len = len;
+
+	if (!IS_ALIGNED(pa, DDE_BUFFER_ALIGN)) {
+		pr_debug("%s buffer pa 0x%lx not 0x%x-byte aligned\n",
+			 in ? "input" : "output", pa, DDE_BUFFER_ALIGN);
+		return -EINVAL;
+	}
+
+	/* only need to check last mult; since buffer must be
+	 * DDE_BUFFER_ALIGN aligned, and that is a multiple of
+	 * DDE_BUFFER_SIZE_MULT, and pre-last page DDE buffers
+	 * are guaranteed a multiple of DDE_BUFFER_SIZE_MULT.
+	 */
+	if (len % DDE_BUFFER_LAST_MULT) {
+		pr_debug("%s buffer len 0x%x not a multiple of 0x%x\n",
+			 in ? "input" : "output", len, DDE_BUFFER_LAST_MULT);
+		if (in)
+			return -EINVAL;
+		len = round_down(len, DDE_BUFFER_LAST_MULT);
+	}
+
+	/* use a single direct DDE */
+	if (len <= LEN_ON_PAGE(pa)) {
+		ret = setup_direct_dde(dde, pa, len);
+		WARN_ON(ret < len);
+		return 0;
+	}
+
+	/* use the DDL */
+	for (i = 0; i < DDL_LEN_MAX && len > 0; i++) {
+		ret = setup_direct_dde(&ddl[i], pa, len);
+		buf += ret;
+		len -= ret;
+		pa = nx842_get_pa(buf);
+	}
+
+	if (len > 0) {
+		pr_debug("0x%x total %s bytes 0x%x too many for DDL.\n",
+			 total_len, in ? "input" : "output", len);
+		if (in)
+			return -EMSGSIZE;
+		total_len -= len;
+	}
+	setup_indirect_dde(dde, ddl, i, total_len);
+
+	return 0;
+}
+
+#define CSB_ERR(csb, msg, ...)					\
+	pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n",	\
+	       ##__VA_ARGS__, (csb)->flags,			\
+	       (csb)->cs, (csb)->cc, (csb)->ce,			\
+	       be32_to_cpu((csb)->count))
+
+#define CSB_ERR_ADDR(csb, msg, ...)				\
+	CSB_ERR(csb, msg " at %lx", ##__VA_ARGS__,		\
+		(unsigned long)be64_to_cpu((csb)->address))
+
+/**
+ * wait_for_csb
+ */
+static int wait_for_csb(struct nx842_workmem *wmem,
+			struct coprocessor_status_block *csb)
+{
+	ktime_t start = wmem->start, now = ktime_get();
+	ktime_t timeout = ktime_add_ms(start, CSB_WAIT_MAX);
+
+	while (!(READ_ONCE(csb->flags) & CSB_V)) {
+		cpu_relax();
+		now = ktime_get();
+		if (ktime_after(now, timeout))
+			break;
+	}
+
+	/* hw has updated csb and output buffer */
+	barrier();
+
+	/* check CSB flags */
+	if (!(csb->flags & CSB_V)) {
+		CSB_ERR(csb, "CSB still not valid after %ld us, giving up",
+			(long)ktime_us_delta(now, start));
+		return -ETIMEDOUT;
+	}
+	if (csb->flags & CSB_F) {
+		CSB_ERR(csb, "Invalid CSB format");
+		return -EPROTO;
+	}
+	if (csb->flags & CSB_CH) {
+		CSB_ERR(csb, "Invalid CSB chaining state");
+		return -EPROTO;
+	}
+
+	/* verify CSB completion sequence is 0 */
+	if (csb->cs) {
+		CSB_ERR(csb, "Invalid CSB completion sequence");
+		return -EPROTO;
+	}
+
+	/* check CSB Completion Code */
+	switch (csb->cc) {
+	/* no error */
+	case CSB_CC_SUCCESS:
+		break;
+	case CSB_CC_TPBC_GT_SPBC:
+		/* not an error, but the compressed data is
+		 * larger than the uncompressed data :(
+		 */
+		break;
+
+	/* input data errors */
+	case CSB_CC_OPERAND_OVERLAP:
+		/* input and output buffers overlap */
+		CSB_ERR(csb, "Operand Overlap error");
+		return -EINVAL;
+	case CSB_CC_INVALID_OPERAND:
+		CSB_ERR(csb, "Invalid operand");
+		return -EINVAL;
+	case CSB_CC_NOSPC:
+		/* output buffer too small */
+		return -ENOSPC;
+	case CSB_CC_ABORT:
+		CSB_ERR(csb, "Function aborted");
+		return -EINTR;
+	case CSB_CC_CRC_MISMATCH:
+		CSB_ERR(csb, "CRC mismatch");
+		return -EINVAL;
+	case CSB_CC_TEMPL_INVALID:
+		CSB_ERR(csb, "Compressed data template invalid");
+		return -EINVAL;
+	case CSB_CC_TEMPL_OVERFLOW:
+		CSB_ERR(csb, "Compressed data template shows data past end");
+		return -EINVAL;
+	case CSB_CC_EXCEED_BYTE_COUNT:	/* P9 or later */
+		/*
+		 * DDE byte count exceeds the limit specified in Maximum
+		 * byte count register.
+		 */
+		CSB_ERR(csb, "DDE byte count exceeds the limit");
+		return -EINVAL;
+
+	/* these should not happen */
+	case CSB_CC_INVALID_ALIGN:
+		/* setup_ddl should have detected this */
+		CSB_ERR_ADDR(csb, "Invalid alignment");
+		return -EINVAL;
+	case CSB_CC_DATA_LENGTH:
+		/* setup_ddl should have detected this */
+		CSB_ERR(csb, "Invalid data length");
+		return -EINVAL;
+	case CSB_CC_WR_TRANSLATION:
+	case CSB_CC_TRANSLATION:
+	case CSB_CC_TRANSLATION_DUP1:
+	case CSB_CC_TRANSLATION_DUP2:
+	case CSB_CC_TRANSLATION_DUP3:
+	case CSB_CC_TRANSLATION_DUP4:
+	case CSB_CC_TRANSLATION_DUP5:
+	case CSB_CC_TRANSLATION_DUP6:
+		/* should not happen, we use physical addrs */
+		CSB_ERR_ADDR(csb, "Translation error");
+		return -EPROTO;
+	case CSB_CC_WR_PROTECTION:
+	case CSB_CC_PROTECTION:
+	case CSB_CC_PROTECTION_DUP1:
+	case CSB_CC_PROTECTION_DUP2:
+	case CSB_CC_PROTECTION_DUP3:
+	case CSB_CC_PROTECTION_DUP4:
+	case CSB_CC_PROTECTION_DUP5:
+	case CSB_CC_PROTECTION_DUP6:
+		/* should not happen, we use physical addrs */
+		CSB_ERR_ADDR(csb, "Protection error");
+		return -EPROTO;
+	case CSB_CC_PRIVILEGE:
+		/* shouldn't happen, we're in HYP mode */
+		CSB_ERR(csb, "Insufficient Privilege error");
+		return -EPROTO;
+	case CSB_CC_EXCESSIVE_DDE:
+		/* shouldn't happen, setup_ddl doesn't use many dde's */
+		CSB_ERR(csb, "Too many DDEs in DDL");
+		return -EINVAL;
+	case CSB_CC_TRANSPORT:
+	case CSB_CC_INVALID_CRB:	/* P9 or later */
+		/* shouldn't happen, we setup CRB correctly */
+		CSB_ERR(csb, "Invalid CRB");
+		return -EINVAL;
+	case CSB_CC_INVALID_DDE:	/* P9 or later */
+		/*
+		 * shouldn't happen, setup_direct/indirect_dde creates
+		 * DDE right
+		 */
+		CSB_ERR(csb, "Invalid DDE");
+		return -EINVAL;
+	case CSB_CC_SEGMENTED_DDL:
+		/* shouldn't happen, setup_ddl creates DDL right */
+		CSB_ERR(csb, "Segmented DDL error");
+		return -EINVAL;
+	case CSB_CC_DDE_OVERFLOW:
+		/* shouldn't happen, setup_ddl creates DDL right */
+		CSB_ERR(csb, "DDE overflow error");
+		return -EINVAL;
+	case CSB_CC_SESSION:
+		/* should not happen with ICSWX */
+		CSB_ERR(csb, "Session violation error");
+		return -EPROTO;
+	case CSB_CC_CHAIN:
+		/* should not happen, we don't use chained CRBs */
+		CSB_ERR(csb, "Chained CRB error");
+		return -EPROTO;
+	case CSB_CC_SEQUENCE:
+		/* should not happen, we don't use chained CRBs */
+		CSB_ERR(csb, "CRB sequence number error");
+		return -EPROTO;
+	case CSB_CC_UNKNOWN_CODE:
+		CSB_ERR(csb, "Unknown subfunction code");
+		return -EPROTO;
+
+	/* hardware errors */
+	case CSB_CC_RD_EXTERNAL:
+	case CSB_CC_RD_EXTERNAL_DUP1:
+	case CSB_CC_RD_EXTERNAL_DUP2:
+	case CSB_CC_RD_EXTERNAL_DUP3:
+		CSB_ERR_ADDR(csb, "Read error outside coprocessor");
+		return -EPROTO;
+	case CSB_CC_WR_EXTERNAL:
+		CSB_ERR_ADDR(csb, "Write error outside coprocessor");
+		return -EPROTO;
+	case CSB_CC_INTERNAL:
+		CSB_ERR(csb, "Internal error in coprocessor");
+		return -EPROTO;
+	case CSB_CC_PROVISION:
+		CSB_ERR(csb, "Storage provision error");
+		return -EPROTO;
+	case CSB_CC_HW:
+		CSB_ERR(csb, "Correctable hardware error");
+		return -EPROTO;
+	case CSB_CC_HW_EXPIRED_TIMER:	/* P9 or later */
+		CSB_ERR(csb, "Job did not finish within allowed time");
+		return -EPROTO;
+
+	default:
+		CSB_ERR(csb, "Invalid CC %d", csb->cc);
+		return -EPROTO;
+	}
+
+	/* check Completion Extension state */
+	if (csb->ce & CSB_CE_TERMINATION) {
+		CSB_ERR(csb, "CSB request was terminated");
+		return -EPROTO;
+	}
+	if (csb->ce & CSB_CE_INCOMPLETE) {
+		CSB_ERR(csb, "CSB request not complete");
+		return -EPROTO;
+	}
+	if (!(csb->ce & CSB_CE_TPBC)) {
+		CSB_ERR(csb, "TPBC not provided, unknown target length");
+		return -EPROTO;
+	}
+
+	/* successful completion */
+	pr_debug_ratelimited("Processed %u bytes in %lu us\n",
+			     be32_to_cpu(csb->count),
+			     (unsigned long)ktime_us_delta(now, start));
+
+	return 0;
+}
+
+static int nx842_config_crb(const unsigned char *in, unsigned int inlen,
+			unsigned char *out, unsigned int outlen,
+			struct nx842_workmem *wmem)
+{
+	struct coprocessor_request_block *crb;
+	struct coprocessor_status_block *csb;
+	u64 csb_addr;
+	int ret;
+
+	crb = &wmem->crb;
+	csb = &crb->csb;
+
+	/* Clear any previous values */
+	memset(crb, 0, sizeof(*crb));
+
+	/* set up DDLs */
+	ret = setup_ddl(&crb->source, wmem->ddl_in,
+			(unsigned char *)in, inlen, true);
+	if (ret)
+		return ret;
+
+	ret = setup_ddl(&crb->target, wmem->ddl_out,
+			out, outlen, false);
+	if (ret)
+		return ret;
+
+	/* set up CRB's CSB addr */
+	csb_addr = nx842_get_pa(csb) & CRB_CSB_ADDRESS;
+	csb_addr |= CRB_CSB_AT; /* Addrs are phys */
+	crb->csb_addr = cpu_to_be64(csb_addr);
+
+	return 0;
+}
+
+/**
+ * nx842_exec_icswx - compress/decompress data using the 842 algorithm
+ *
+ * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * This compresses or decompresses the provided input buffer into the provided
+ * output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * output data.  If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * The @workmem buffer should only be used by one function call at a time.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ *           nx842_powernv_driver.workmem_size
+ * @fc: function code, see CCW Function Codes in nx-842.h
+ *
+ * Returns:
+ *   0		Success, output of length @outlenp stored in the buffer at @out
+ *   -ENODEV	Hardware unavailable
+ *   -ENOSPC	Output buffer is to small
+ *   -EMSGSIZE	Input buffer too large
+ *   -EINVAL	buffer constraints do not fix nx842_constraints
+ *   -EPROTO	hardware error during operation
+ *   -ETIMEDOUT	hardware did not complete operation in reasonable time
+ *   -EINTR	operation was aborted
+ */
+static int nx842_exec_icswx(const unsigned char *in, unsigned int inlen,
+				  unsigned char *out, unsigned int *outlenp,
+				  void *workmem, int fc)
+{
+	struct coprocessor_request_block *crb;
+	struct coprocessor_status_block *csb;
+	struct nx842_workmem *wmem;
+	int ret;
+	u32 ccw;
+	unsigned int outlen = *outlenp;
+
+	wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
+
+	*outlenp = 0;
+
+	/* shoudn't happen, we don't load without a coproc */
+	if (!nx842_ct) {
+		pr_err_ratelimited("coprocessor CT is 0");
+		return -ENODEV;
+	}
+
+	ret = nx842_config_crb(in, inlen, out, outlen, wmem);
+	if (ret)
+		return ret;
+
+	crb = &wmem->crb;
+	csb = &crb->csb;
+
+	/* set up CCW */
+	ccw = 0;
+	ccw = SET_FIELD(CCW_CT, ccw, nx842_ct);
+	ccw = SET_FIELD(CCW_CI_842, ccw, 0); /* use 0 for hw auto-selection */
+	ccw = SET_FIELD(CCW_FC_842, ccw, fc);
+
+	wmem->start = ktime_get();
+
+	/* do ICSWX */
+	ret = icswx(cpu_to_be32(ccw), crb);
+
+	pr_debug_ratelimited("icswx CR %x ccw %x crb->ccw %x\n", ret,
+			     (unsigned int)ccw,
+			     (unsigned int)be32_to_cpu(crb->ccw));
+
+	/*
+	 * NX842 coprocessor sets 3rd bit in CR register with XER[S0].
+	 * XER[S0] is the integer summary overflow bit which is nothing
+	 * to do NX. Since this bit can be set with other return values,
+	 * mask this bit.
+	 */
+	ret &= ~ICSWX_XERS0;
+
+	switch (ret) {
+	case ICSWX_INITIATED:
+		ret = wait_for_csb(wmem, csb);
+		break;
+	case ICSWX_BUSY:
+		pr_debug_ratelimited("842 Coprocessor busy\n");
+		ret = -EBUSY;
+		break;
+	case ICSWX_REJECTED:
+		pr_err_ratelimited("ICSWX rejected\n");
+		ret = -EPROTO;
+		break;
+	}
+
+	if (!ret)
+		*outlenp = be32_to_cpu(csb->count);
+
+	return ret;
+}
+
+/**
+ * nx842_exec_vas - compress/decompress data using the 842 algorithm
+ *
+ * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * This compresses or decompresses the provided input buffer into the provided
+ * output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * output data.  If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * The @workmem buffer should only be used by one function call at a time.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ *           nx842_powernv_driver.workmem_size
+ * @fc: function code, see CCW Function Codes in nx-842.h
+ *
+ * Returns:
+ *   0		Success, output of length @outlenp stored in the buffer
+ *		at @out
+ *   -ENODEV	Hardware unavailable
+ *   -ENOSPC	Output buffer is to small
+ *   -EMSGSIZE	Input buffer too large
+ *   -EINVAL	buffer constraints do not fix nx842_constraints
+ *   -EPROTO	hardware error during operation
+ *   -ETIMEDOUT	hardware did not complete operation in reasonable time
+ *   -EINTR	operation was aborted
+ */
+static int nx842_exec_vas(const unsigned char *in, unsigned int inlen,
+				  unsigned char *out, unsigned int *outlenp,
+				  void *workmem, int fc)
+{
+	struct coprocessor_request_block *crb;
+	struct coprocessor_status_block *csb;
+	struct nx842_workmem *wmem;
+	struct vas_window *txwin;
+	int ret, i = 0;
+	u32 ccw;
+	unsigned int outlen = *outlenp;
+
+	wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
+
+	*outlenp = 0;
+
+	crb = &wmem->crb;
+	csb = &crb->csb;
+
+	ret = nx842_config_crb(in, inlen, out, outlen, wmem);
+	if (ret)
+		return ret;
+
+	ccw = 0;
+	ccw = SET_FIELD(CCW_FC_842, ccw, fc);
+	crb->ccw = cpu_to_be32(ccw);
+
+	do {
+		wmem->start = ktime_get();
+		preempt_disable();
+		txwin = this_cpu_read(cpu_txwin);
+
+		/*
+		 * VAS copy CRB into L2 cache. Refer <asm/vas.h>.
+		 * @crb and @offset.
+		 */
+		vas_copy_crb(crb, 0);
+
+		/*
+		 * VAS paste previously copied CRB to NX.
+		 * @txwin, @offset and @last (must be true).
+		 */
+		ret = vas_paste_crb(txwin, 0, 1);
+		preempt_enable();
+		/*
+		 * Retry copy/paste function for VAS failures.
+		 */
+	} while (ret && (i++ < VAS_RETRIES));
+
+	if (ret) {
+		pr_err_ratelimited("VAS copy/paste failed\n");
+		return ret;
+	}
+
+	ret = wait_for_csb(wmem, csb);
+	if (!ret)
+		*outlenp = be32_to_cpu(csb->count);
+
+	return ret;
+}
+
+/**
+ * nx842_powernv_compress - Compress data using the 842 algorithm
+ *
+ * Compression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * The input buffer is compressed and the result is stored in the
+ * provided output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * compressed data.  If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ *           nx842_powernv_driver.workmem_size
+ *
+ * Returns: see @nx842_powernv_exec()
+ */
+static int nx842_powernv_compress(const unsigned char *in, unsigned int inlen,
+				  unsigned char *out, unsigned int *outlenp,
+				  void *wmem)
+{
+	return nx842_powernv_exec(in, inlen, out, outlenp,
+				      wmem, CCW_FC_842_COMP_CRC);
+}
+
+/**
+ * nx842_powernv_decompress - Decompress data using the 842 algorithm
+ *
+ * Decompression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * The input buffer is decompressed and the result is stored in the
+ * provided output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * decompressed data.  If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ *           nx842_powernv_driver.workmem_size
+ *
+ * Returns: see @nx842_powernv_exec()
+ */
+static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen,
+				    unsigned char *out, unsigned int *outlenp,
+				    void *wmem)
+{
+	return nx842_powernv_exec(in, inlen, out, outlenp,
+				      wmem, CCW_FC_842_DECOMP_CRC);
+}
+
+static inline void nx_add_coprocs_list(struct nx_coproc *coproc,
+					int chipid)
+{
+	coproc->chip_id = chipid;
+	INIT_LIST_HEAD(&coproc->list);
+	list_add(&coproc->list, &nx_coprocs);
+}
+
+static struct vas_window *nx_alloc_txwin(struct nx_coproc *coproc)
+{
+	struct vas_window *txwin = NULL;
+	struct vas_tx_win_attr txattr;
+
+	/*
+	 * Kernel requests will be high priority. So open send
+	 * windows only for high priority RxFIFO entries.
+	 */
+	vas_init_tx_win_attr(&txattr, coproc->ct);
+	txattr.lpid = 0;	/* lpid is 0 for kernel requests */
+
+	/*
+	 * Open a VAS send window which is used to send request to NX.
+	 */
+	txwin = vas_tx_win_open(coproc->vas.id, coproc->ct, &txattr);
+	if (IS_ERR(txwin))
+		pr_err("ibm,nx-842: Can not open TX window: %ld\n",
+				PTR_ERR(txwin));
+
+	return txwin;
+}
+
+/*
+ * Identify chip ID for each CPU, open send wndow for the corresponding NX
+ * engine and save txwin in percpu cpu_txwin.
+ * cpu_txwin is used in copy/paste operation for each compression /
+ * decompression request.
+ */
+static int nx_open_percpu_txwins(void)
+{
+	struct nx_coproc *coproc, *n;
+	unsigned int i, chip_id;
+
+	for_each_possible_cpu(i) {
+		struct vas_window *txwin = NULL;
+
+		chip_id = cpu_to_chip_id(i);
+
+		list_for_each_entry_safe(coproc, n, &nx_coprocs, list) {
+			/*
+			 * Kernel requests use only high priority FIFOs. So
+			 * open send windows for these FIFOs.
+			 * GZIP is not supported in kernel right now.
+			 */
+
+			if (coproc->ct != VAS_COP_TYPE_842_HIPRI)
+				continue;
+
+			if (coproc->chip_id == chip_id) {
+				txwin = nx_alloc_txwin(coproc);
+				if (IS_ERR(txwin))
+					return PTR_ERR(txwin);
+
+				per_cpu(cpu_txwin, i) = txwin;
+				break;
+			}
+		}
+
+		if (!per_cpu(cpu_txwin, i)) {
+			/* shouldn't happen, Each chip will have NX engine */
+			pr_err("NX engine is not available for CPU %d\n", i);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int __init nx_set_ct(struct nx_coproc *coproc, const char *priority,
+				int high, int normal)
+{
+	if (!strcmp(priority, "High"))
+		coproc->ct = high;
+	else if (!strcmp(priority, "Normal"))
+		coproc->ct = normal;
+	else {
+		pr_err("Invalid RxFIFO priority value\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
+					int vasid, int type, int *ct)
+{
+	struct vas_window *rxwin = NULL;
+	struct vas_rx_win_attr rxattr;
+	u32 lpid, pid, tid, fifo_size;
+	struct nx_coproc *coproc;
+	u64 rx_fifo;
+	const char *priority;
+	int ret;
+
+	ret = of_property_read_u64(dn, "rx-fifo-address", &rx_fifo);
+	if (ret) {
+		pr_err("Missing rx-fifo-address property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(dn, "rx-fifo-size", &fifo_size);
+	if (ret) {
+		pr_err("Missing rx-fifo-size property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(dn, "lpid", &lpid);
+	if (ret) {
+		pr_err("Missing lpid property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(dn, "pid", &pid);
+	if (ret) {
+		pr_err("Missing pid property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(dn, "tid", &tid);
+	if (ret) {
+		pr_err("Missing tid property\n");
+		return ret;
+	}
+
+	ret = of_property_read_string(dn, "priority", &priority);
+	if (ret) {
+		pr_err("Missing priority property\n");
+		return ret;
+	}
+
+	coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
+	if (!coproc)
+		return -ENOMEM;
+
+	if (type == NX_CT_842)
+		ret = nx_set_ct(coproc, priority, VAS_COP_TYPE_842_HIPRI,
+			VAS_COP_TYPE_842);
+	else if (type == NX_CT_GZIP)
+		ret = nx_set_ct(coproc, priority, VAS_COP_TYPE_GZIP_HIPRI,
+				VAS_COP_TYPE_GZIP);
+
+	if (ret)
+		goto err_out;
+
+	vas_init_rx_win_attr(&rxattr, coproc->ct);
+	rxattr.rx_fifo = (void *)rx_fifo;
+	rxattr.rx_fifo_size = fifo_size;
+	rxattr.lnotify_lpid = lpid;
+	rxattr.lnotify_pid = pid;
+	rxattr.lnotify_tid = tid;
+	/*
+	 * Maximum RX window credits can not be more than #CRBs in
+	 * RxFIFO. Otherwise, can get checkstop if RxFIFO overruns.
+	 */
+	rxattr.wcreds_max = fifo_size / CRB_SIZE;
+
+	/*
+	 * Open a VAS receice window which is used to configure RxFIFO
+	 * for NX.
+	 */
+	rxwin = vas_rx_win_open(vasid, coproc->ct, &rxattr);
+	if (IS_ERR(rxwin)) {
+		ret = PTR_ERR(rxwin);
+		pr_err("setting RxFIFO with VAS failed: %d\n",
+			ret);
+		goto err_out;
+	}
+
+	coproc->vas.rxwin = rxwin;
+	coproc->vas.id = vasid;
+	nx_add_coprocs_list(coproc, chip_id);
+
+	/*
+	 * (lpid, pid, tid) combination has to be unique for each
+	 * coprocessor instance in the system. So to make it
+	 * unique, skiboot uses coprocessor type such as 842 or
+	 * GZIP for pid and provides this value to kernel in pid
+	 * device-tree property.
+	 */
+	*ct = pid;
+
+	return 0;
+
+err_out:
+	kfree(coproc);
+	return ret;
+}
+
+static int __init nx_coproc_init(int chip_id, int ct_842, int ct_gzip)
+{
+	int ret = 0;
+
+	if (opal_check_token(OPAL_NX_COPROC_INIT)) {
+		ret = opal_nx_coproc_init(chip_id, ct_842);
+
+		if (!ret)
+			ret = opal_nx_coproc_init(chip_id, ct_gzip);
+
+		if (ret) {
+			ret = opal_error_code(ret);
+			pr_err("Failed to initialize NX for chip(%d): %d\n",
+				chip_id, ret);
+		}
+	} else
+		pr_warn("Firmware doesn't support NX initialization\n");
+
+	return ret;
+}
+
+static int __init find_nx_device_tree(struct device_node *dn, int chip_id,
+					int vasid, int type, char *devname,
+					int *ct)
+{
+	int ret = 0;
+
+	if (of_device_is_compatible(dn, devname)) {
+		ret  = vas_cfg_coproc_info(dn, chip_id, vasid, type, ct);
+		if (ret)
+			of_node_put(dn);
+	}
+
+	return ret;
+}
+
+static int __init nx_powernv_probe_vas(struct device_node *pn)
+{
+	int chip_id, vasid, ret = 0;
+	int ct_842 = 0, ct_gzip = 0;
+	struct device_node *dn;
+
+	chip_id = of_get_ibm_chip_id(pn);
+	if (chip_id < 0) {
+		pr_err("ibm,chip-id missing\n");
+		return -EINVAL;
+	}
+
+	vasid = chip_to_vas_id(chip_id);
+	if (vasid < 0) {
+		pr_err("Unable to map chip_id %d to vasid\n", chip_id);
+		return -EINVAL;
+	}
+
+	for_each_child_of_node(pn, dn) {
+		ret = find_nx_device_tree(dn, chip_id, vasid, NX_CT_842,
+					"ibm,p9-nx-842", &ct_842);
+
+		if (!ret)
+			ret = find_nx_device_tree(dn, chip_id, vasid,
+				NX_CT_GZIP, "ibm,p9-nx-gzip", &ct_gzip);
+
+		if (ret)
+			return ret;
+	}
+
+	if (!ct_842 || !ct_gzip) {
+		pr_err("NX FIFO nodes are missing\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Initialize NX instance for both high and normal priority FIFOs.
+	 */
+	ret = nx_coproc_init(chip_id, ct_842, ct_gzip);
+
+	return ret;
+}
+
+static int __init nx842_powernv_probe(struct device_node *dn)
+{
+	struct nx_coproc *coproc;
+	unsigned int ct, ci;
+	int chip_id;
+
+	chip_id = of_get_ibm_chip_id(dn);
+	if (chip_id < 0) {
+		pr_err("ibm,chip-id missing\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(dn, "ibm,842-coprocessor-type", &ct)) {
+		pr_err("ibm,842-coprocessor-type missing\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(dn, "ibm,842-coprocessor-instance", &ci)) {
+		pr_err("ibm,842-coprocessor-instance missing\n");
+		return -EINVAL;
+	}
+
+	coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
+	if (!coproc)
+		return -ENOMEM;
+
+	coproc->ct = ct;
+	coproc->ci = ci;
+	nx_add_coprocs_list(coproc, chip_id);
+
+	pr_info("coprocessor found on chip %d, CT %d CI %d\n", chip_id, ct, ci);
+
+	if (!nx842_ct)
+		nx842_ct = ct;
+	else if (nx842_ct != ct)
+		pr_err("NX842 chip %d, CT %d != first found CT %d\n",
+		       chip_id, ct, nx842_ct);
+
+	return 0;
+}
+
+static void nx_delete_coprocs(void)
+{
+	struct nx_coproc *coproc, *n;
+	struct vas_window *txwin;
+	int i;
+
+	/*
+	 * close percpu txwins that are opened for the corresponding coproc.
+	 */
+	for_each_possible_cpu(i) {
+		txwin = per_cpu(cpu_txwin, i);
+		if (txwin)
+			vas_win_close(txwin);
+
+		per_cpu(cpu_txwin, i) = NULL;
+	}
+
+	list_for_each_entry_safe(coproc, n, &nx_coprocs, list) {
+		if (coproc->vas.rxwin)
+			vas_win_close(coproc->vas.rxwin);
+
+		list_del(&coproc->list);
+		kfree(coproc);
+	}
+}
+
+static struct nx842_constraints nx842_powernv_constraints = {
+	.alignment =	DDE_BUFFER_ALIGN,
+	.multiple =	DDE_BUFFER_LAST_MULT,
+	.minimum =	DDE_BUFFER_LAST_MULT,
+	.maximum =	(DDL_LEN_MAX - 1) * PAGE_SIZE,
+};
+
+static struct nx842_driver nx842_powernv_driver = {
+	.name =		KBUILD_MODNAME,
+	.owner =	THIS_MODULE,
+	.workmem_size =	sizeof(struct nx842_workmem),
+	.constraints =	&nx842_powernv_constraints,
+	.compress =	nx842_powernv_compress,
+	.decompress =	nx842_powernv_decompress,
+};
+
+static int nx842_powernv_crypto_init(struct crypto_tfm *tfm)
+{
+	return nx842_crypto_init(tfm, &nx842_powernv_driver);
+}
+
+static struct crypto_alg nx842_powernv_alg = {
+	.cra_name		= "842",
+	.cra_driver_name	= "842-nx",
+	.cra_priority		= 300,
+	.cra_flags		= CRYPTO_ALG_TYPE_COMPRESS,
+	.cra_ctxsize		= sizeof(struct nx842_crypto_ctx),
+	.cra_module		= THIS_MODULE,
+	.cra_init		= nx842_powernv_crypto_init,
+	.cra_exit		= nx842_crypto_exit,
+	.cra_u			= { .compress = {
+	.coa_compress		= nx842_crypto_compress,
+	.coa_decompress		= nx842_crypto_decompress } }
+};
+
+static __init int nx_compress_powernv_init(void)
+{
+	struct device_node *dn;
+	int ret;
+
+	/* verify workmem size/align restrictions */
+	BUILD_BUG_ON(WORKMEM_ALIGN % CRB_ALIGN);
+	BUILD_BUG_ON(CRB_ALIGN % DDE_ALIGN);
+	BUILD_BUG_ON(CRB_SIZE % DDE_ALIGN);
+	/* verify buffer size/align restrictions */
+	BUILD_BUG_ON(PAGE_SIZE % DDE_BUFFER_ALIGN);
+	BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT);
+	BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT);
+
+	for_each_compatible_node(dn, NULL, "ibm,power9-nx") {
+		ret = nx_powernv_probe_vas(dn);
+		if (ret) {
+			nx_delete_coprocs();
+			of_node_put(dn);
+			return ret;
+		}
+	}
+
+	if (list_empty(&nx_coprocs)) {
+		for_each_compatible_node(dn, NULL, "ibm,power-nx")
+			nx842_powernv_probe(dn);
+
+		if (!nx842_ct)
+			return -ENODEV;
+
+		nx842_powernv_exec = nx842_exec_icswx;
+	} else {
+		/*
+		 * Register VAS user space API for NX GZIP so
+		 * that user space can use GZIP engine.
+		 * Using high FIFO priority for kernel requests and
+		 * normal FIFO priority is assigned for userspace.
+		 * 842 compression is supported only in kernel.
+		 */
+		ret = vas_register_coproc_api(THIS_MODULE, VAS_COP_TYPE_GZIP,
+						"nx-gzip");
+
+		/*
+		 * GZIP is not supported in kernel right now.
+		 * So open tx windows only for 842.
+		 */
+		if (!ret)
+			ret = nx_open_percpu_txwins();
+
+		if (ret) {
+			nx_delete_coprocs();
+			return ret;
+		}
+
+		nx842_powernv_exec = nx842_exec_vas;
+	}
+
+	ret = crypto_register_alg(&nx842_powernv_alg);
+	if (ret) {
+		nx_delete_coprocs();
+		return ret;
+	}
+
+	return 0;
+}
+module_init(nx_compress_powernv_init);
+
+static void __exit nx_compress_powernv_exit(void)
+{
+	/*
+	 * GZIP engine is supported only in power9 or later and nx842_ct
+	 * is used on power8 (icswx).
+	 * VAS API for NX GZIP is registered during init for user space
+	 * use. So delete this API use for GZIP engine.
+	 */
+	if (!nx842_ct)
+		vas_unregister_coproc_api();
+
+	crypto_unregister_alg(&nx842_powernv_alg);
+
+	nx_delete_coprocs();
+}
+module_exit(nx_compress_powernv_exit);
diff --git a/drivers/dax/device.c b/drivers/dax/device.c
index 1af823b2fe6b..4c0af2eb7e19 100644
--- a/drivers/dax/device.c
+++ b/drivers/dax/device.c
@@ -377,6 +377,7 @@ static int dax_open(struct inode *inode, struct file *filp)
 	inode->i_mapping->a_ops = &dev_dax_aops;
 	filp->f_mapping = inode->i_mapping;
 	filp->f_wb_err = filemap_sample_wb_err(filp->f_mapping);
+	filp->f_sb_err = file_sample_sb_err(filp);
 	filp->private_data = dev_dax;
 	inode->i_flags = S_DAX;
 
diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 28b2c7ca416e..e94a27804c20 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -420,7 +420,7 @@ tegra_actmon_cpufreq_contribution(struct tegra_devfreq *tegra,
 
 	static_cpu_emc_freq = actmon_cpu_to_emc_rate(tegra, cpu_freq);
 
-	if (dev_freq >= static_cpu_emc_freq)
+	if (dev_freq + actmon_dev->boost_freq >= static_cpu_emc_freq)
 		return 0;
 
 	return static_cpu_emc_freq;
@@ -807,10 +807,9 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 	}
 
 	err = platform_get_irq(pdev, 0);
-	if (err < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ: %d\n", err);
+	if (err < 0)
 		return err;
-	}
+
 	tegra->irq = err;
 
 	irq_set_status_flags(tegra->irq, IRQ_NOAUTOEN);
diff --git a/drivers/dma-buf/Makefile b/drivers/dma-buf/Makefile
index 9c190026bfab..995e05f609ff 100644
--- a/drivers/dma-buf/Makefile
+++ b/drivers/dma-buf/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_UDMABUF)		+= udmabuf.o
 
 dmabuf_selftests-y := \
 	selftest.o \
-	st-dma-fence.o
+	st-dma-fence.o \
+	st-dma-fence-chain.o
 
 obj-$(CONFIG_DMABUF_SELFTESTS)	+= dmabuf_selftests.o
diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index ccc9eda1bc28..1d923b8e4c59 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -388,7 +388,8 @@ static long dma_buf_ioctl(struct file *file,
 
 		return ret;
 
-	case DMA_BUF_SET_NAME:
+	case DMA_BUF_SET_NAME_A:
+	case DMA_BUF_SET_NAME_B:
 		return dma_buf_set_name(dmabuf, (const char __user *)arg);
 
 	default:
@@ -690,6 +691,8 @@ dma_buf_dynamic_attach(struct dma_buf *dmabuf, struct device *dev,
 
 	attach->dev = dev;
 	attach->dmabuf = dmabuf;
+	if (importer_ops)
+		attach->peer2peer = importer_ops->allow_peer2peer;
 	attach->importer_ops = importer_ops;
 	attach->importer_priv = importer_priv;
 
diff --git a/drivers/dma-buf/dma-fence-chain.c b/drivers/dma-buf/dma-fence-chain.c
index 44a741677d25..c435bbba851c 100644
--- a/drivers/dma-buf/dma-fence-chain.c
+++ b/drivers/dma-buf/dma-fence-chain.c
@@ -62,7 +62,8 @@ struct dma_fence *dma_fence_chain_walk(struct dma_fence *fence)
 			replacement = NULL;
 		}
 
-		tmp = cmpxchg((void **)&chain->prev, (void *)prev, (void *)replacement);
+		tmp = cmpxchg((struct dma_fence __force **)&chain->prev,
+			      prev, replacement);
 		if (tmp == prev)
 			dma_fence_put(tmp);
 		else
@@ -98,6 +99,12 @@ int dma_fence_chain_find_seqno(struct dma_fence **pfence, uint64_t seqno)
 		return -EINVAL;
 
 	dma_fence_chain_for_each(*pfence, &chain->base) {
+		if ((*pfence)->seqno < seqno) { /* already signaled */
+			dma_fence_put(*pfence);
+			*pfence = NULL;
+			break;
+		}
+
 		if ((*pfence)->context != chain->base.context ||
 		    to_dma_fence_chain(*pfence)->prev_seqno < seqno)
 			break;
@@ -221,6 +228,7 @@ EXPORT_SYMBOL(dma_fence_chain_ops);
  * @chain: the chain node to initialize
  * @prev: the previous fence
  * @fence: the current fence
+ * @seqno: the sequence number (syncpt) of the fence within the chain
  *
  * Initialize a new chain node and either start a new chain or add the node to
  * the existing chain of the previous fence.
diff --git a/drivers/dma-buf/selftests.h b/drivers/dma-buf/selftests.h
index 5320386f02e5..55918ef9adab 100644
--- a/drivers/dma-buf/selftests.h
+++ b/drivers/dma-buf/selftests.h
@@ -11,3 +11,4 @@
  */
 selftest(sanitycheck, __sanitycheck__) /* keep first (igt selfcheck) */
 selftest(dma_fence, dma_fence)
+selftest(dma_fence_chain, dma_fence_chain)
diff --git a/drivers/dma-buf/st-dma-fence-chain.c b/drivers/dma-buf/st-dma-fence-chain.c
new file mode 100644
index 000000000000..5d45ba7ba3cd
--- /dev/null
+++ b/drivers/dma-buf/st-dma-fence-chain.c
@@ -0,0 +1,715 @@
+// SPDX-License-Identifier: MIT
+
+/*
+ * Copyright © 2019 Intel Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-fence.h>
+#include <linux/dma-fence-chain.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/mm.h>
+#include <linux/sched/signal.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/random.h>
+
+#include "selftest.h"
+
+#define CHAIN_SZ (4 << 10)
+
+static struct kmem_cache *slab_fences;
+
+static inline struct mock_fence {
+	struct dma_fence base;
+	spinlock_t lock;
+} *to_mock_fence(struct dma_fence *f) {
+	return container_of(f, struct mock_fence, base);
+}
+
+static const char *mock_name(struct dma_fence *f)
+{
+	return "mock";
+}
+
+static void mock_fence_release(struct dma_fence *f)
+{
+	kmem_cache_free(slab_fences, to_mock_fence(f));
+}
+
+static const struct dma_fence_ops mock_ops = {
+	.get_driver_name = mock_name,
+	.get_timeline_name = mock_name,
+	.release = mock_fence_release,
+};
+
+static struct dma_fence *mock_fence(void)
+{
+	struct mock_fence *f;
+
+	f = kmem_cache_alloc(slab_fences, GFP_KERNEL);
+	if (!f)
+		return NULL;
+
+	spin_lock_init(&f->lock);
+	dma_fence_init(&f->base, &mock_ops, &f->lock, 0, 0);
+
+	return &f->base;
+}
+
+static inline struct mock_chain {
+	struct dma_fence_chain base;
+} *to_mock_chain(struct dma_fence *f) {
+	return container_of(f, struct mock_chain, base.base);
+}
+
+static struct dma_fence *mock_chain(struct dma_fence *prev,
+				    struct dma_fence *fence,
+				    u64 seqno)
+{
+	struct mock_chain *f;
+
+	f = kmalloc(sizeof(*f), GFP_KERNEL);
+	if (!f)
+		return NULL;
+
+	dma_fence_chain_init(&f->base,
+			     dma_fence_get(prev),
+			     dma_fence_get(fence),
+			     seqno);
+
+	return &f->base.base;
+}
+
+static int sanitycheck(void *arg)
+{
+	struct dma_fence *f, *chain;
+	int err = 0;
+
+	f = mock_fence();
+	if (!f)
+		return -ENOMEM;
+
+	chain = mock_chain(NULL, f, 1);
+	if (!chain)
+		err = -ENOMEM;
+
+	dma_fence_signal(f);
+	dma_fence_put(f);
+
+	dma_fence_put(chain);
+
+	return err;
+}
+
+struct fence_chains {
+	unsigned int chain_length;
+	struct dma_fence **fences;
+	struct dma_fence **chains;
+
+	struct dma_fence *tail;
+};
+
+static uint64_t seqno_inc(unsigned int i)
+{
+	return i + 1;
+}
+
+static int fence_chains_init(struct fence_chains *fc, unsigned int count,
+			     uint64_t (*seqno_fn)(unsigned int))
+{
+	unsigned int i;
+	int err = 0;
+
+	fc->chains = kvmalloc_array(count, sizeof(*fc->chains),
+				    GFP_KERNEL | __GFP_ZERO);
+	if (!fc->chains)
+		return -ENOMEM;
+
+	fc->fences = kvmalloc_array(count, sizeof(*fc->fences),
+				    GFP_KERNEL | __GFP_ZERO);
+	if (!fc->fences) {
+		err = -ENOMEM;
+		goto err_chains;
+	}
+
+	fc->tail = NULL;
+	for (i = 0; i < count; i++) {
+		fc->fences[i] = mock_fence();
+		if (!fc->fences[i]) {
+			err = -ENOMEM;
+			goto unwind;
+		}
+
+		fc->chains[i] = mock_chain(fc->tail,
+					   fc->fences[i],
+					   seqno_fn(i));
+		if (!fc->chains[i]) {
+			err = -ENOMEM;
+			goto unwind;
+		}
+
+		fc->tail = fc->chains[i];
+	}
+
+	fc->chain_length = i;
+	return 0;
+
+unwind:
+	for (i = 0; i < count; i++) {
+		dma_fence_put(fc->fences[i]);
+		dma_fence_put(fc->chains[i]);
+	}
+	kvfree(fc->fences);
+err_chains:
+	kvfree(fc->chains);
+	return err;
+}
+
+static void fence_chains_fini(struct fence_chains *fc)
+{
+	unsigned int i;
+
+	for (i = 0; i < fc->chain_length; i++) {
+		dma_fence_signal(fc->fences[i]);
+		dma_fence_put(fc->fences[i]);
+	}
+	kvfree(fc->fences);
+
+	for (i = 0; i < fc->chain_length; i++)
+		dma_fence_put(fc->chains[i]);
+	kvfree(fc->chains);
+}
+
+static int find_seqno(void *arg)
+{
+	struct fence_chains fc;
+	struct dma_fence *fence;
+	int err;
+	int i;
+
+	err = fence_chains_init(&fc, 64, seqno_inc);
+	if (err)
+		return err;
+
+	fence = dma_fence_get(fc.tail);
+	err = dma_fence_chain_find_seqno(&fence, 0);
+	dma_fence_put(fence);
+	if (err) {
+		pr_err("Reported %d for find_seqno(0)!\n", err);
+		goto err;
+	}
+
+	for (i = 0; i < fc.chain_length; i++) {
+		fence = dma_fence_get(fc.tail);
+		err = dma_fence_chain_find_seqno(&fence, i + 1);
+		dma_fence_put(fence);
+		if (err) {
+			pr_err("Reported %d for find_seqno(%d:%d)!\n",
+			       err, fc.chain_length + 1, i + 1);
+			goto err;
+		}
+		if (fence != fc.chains[i]) {
+			pr_err("Incorrect fence reported by find_seqno(%d:%d)\n",
+			       fc.chain_length + 1, i + 1);
+			err = -EINVAL;
+			goto err;
+		}
+
+		dma_fence_get(fence);
+		err = dma_fence_chain_find_seqno(&fence, i + 1);
+		dma_fence_put(fence);
+		if (err) {
+			pr_err("Error reported for finding self\n");
+			goto err;
+		}
+		if (fence != fc.chains[i]) {
+			pr_err("Incorrect fence reported by find self\n");
+			err = -EINVAL;
+			goto err;
+		}
+
+		dma_fence_get(fence);
+		err = dma_fence_chain_find_seqno(&fence, i + 2);
+		dma_fence_put(fence);
+		if (!err) {
+			pr_err("Error not reported for future fence: find_seqno(%d:%d)!\n",
+			       i + 1, i + 2);
+			err = -EINVAL;
+			goto err;
+		}
+
+		dma_fence_get(fence);
+		err = dma_fence_chain_find_seqno(&fence, i);
+		dma_fence_put(fence);
+		if (err) {
+			pr_err("Error reported for previous fence!\n");
+			goto err;
+		}
+		if (i > 0 && fence != fc.chains[i - 1]) {
+			pr_err("Incorrect fence reported by find_seqno(%d:%d)\n",
+			       i + 1, i);
+			err = -EINVAL;
+			goto err;
+		}
+	}
+
+err:
+	fence_chains_fini(&fc);
+	return err;
+}
+
+static int find_signaled(void *arg)
+{
+	struct fence_chains fc;
+	struct dma_fence *fence;
+	int err;
+
+	err = fence_chains_init(&fc, 2, seqno_inc);
+	if (err)
+		return err;
+
+	dma_fence_signal(fc.fences[0]);
+
+	fence = dma_fence_get(fc.tail);
+	err = dma_fence_chain_find_seqno(&fence, 1);
+	dma_fence_put(fence);
+	if (err) {
+		pr_err("Reported %d for find_seqno()!\n", err);
+		goto err;
+	}
+
+	if (fence && fence != fc.chains[0]) {
+		pr_err("Incorrect chain-fence.seqno:%lld reported for completed seqno:1\n",
+		       fence->seqno);
+
+		dma_fence_get(fence);
+		err = dma_fence_chain_find_seqno(&fence, 1);
+		dma_fence_put(fence);
+		if (err)
+			pr_err("Reported %d for finding self!\n", err);
+
+		err = -EINVAL;
+	}
+
+err:
+	fence_chains_fini(&fc);
+	return err;
+}
+
+static int find_out_of_order(void *arg)
+{
+	struct fence_chains fc;
+	struct dma_fence *fence;
+	int err;
+
+	err = fence_chains_init(&fc, 3, seqno_inc);
+	if (err)
+		return err;
+
+	dma_fence_signal(fc.fences[1]);
+
+	fence = dma_fence_get(fc.tail);
+	err = dma_fence_chain_find_seqno(&fence, 2);
+	dma_fence_put(fence);
+	if (err) {
+		pr_err("Reported %d for find_seqno()!\n", err);
+		goto err;
+	}
+
+	if (fence && fence != fc.chains[1]) {
+		pr_err("Incorrect chain-fence.seqno:%lld reported for completed seqno:2\n",
+		       fence->seqno);
+
+		dma_fence_get(fence);
+		err = dma_fence_chain_find_seqno(&fence, 2);
+		dma_fence_put(fence);
+		if (err)
+			pr_err("Reported %d for finding self!\n", err);
+
+		err = -EINVAL;
+	}
+
+err:
+	fence_chains_fini(&fc);
+	return err;
+}
+
+static uint64_t seqno_inc2(unsigned int i)
+{
+	return 2 * i + 2;
+}
+
+static int find_gap(void *arg)
+{
+	struct fence_chains fc;
+	struct dma_fence *fence;
+	int err;
+	int i;
+
+	err = fence_chains_init(&fc, 64, seqno_inc2);
+	if (err)
+		return err;
+
+	for (i = 0; i < fc.chain_length; i++) {
+		fence = dma_fence_get(fc.tail);
+		err = dma_fence_chain_find_seqno(&fence, 2 * i + 1);
+		dma_fence_put(fence);
+		if (err) {
+			pr_err("Reported %d for find_seqno(%d:%d)!\n",
+			       err, fc.chain_length + 1, 2 * i + 1);
+			goto err;
+		}
+		if (fence != fc.chains[i]) {
+			pr_err("Incorrect fence.seqno:%lld reported by find_seqno(%d:%d)\n",
+			       fence->seqno,
+			       fc.chain_length + 1,
+			       2 * i + 1);
+			err = -EINVAL;
+			goto err;
+		}
+
+		dma_fence_get(fence);
+		err = dma_fence_chain_find_seqno(&fence, 2 * i + 2);
+		dma_fence_put(fence);
+		if (err) {
+			pr_err("Error reported for finding self\n");
+			goto err;
+		}
+		if (fence != fc.chains[i]) {
+			pr_err("Incorrect fence reported by find self\n");
+			err = -EINVAL;
+			goto err;
+		}
+	}
+
+err:
+	fence_chains_fini(&fc);
+	return err;
+}
+
+struct find_race {
+	struct fence_chains fc;
+	atomic_t children;
+};
+
+static int __find_race(void *arg)
+{
+	struct find_race *data = arg;
+	int err = 0;
+
+	while (!kthread_should_stop()) {
+		struct dma_fence *fence = dma_fence_get(data->fc.tail);
+		int seqno;
+
+		seqno = prandom_u32_max(data->fc.chain_length) + 1;
+
+		err = dma_fence_chain_find_seqno(&fence, seqno);
+		if (err) {
+			pr_err("Failed to find fence seqno:%d\n",
+			       seqno);
+			dma_fence_put(fence);
+			break;
+		}
+		if (!fence)
+			goto signal;
+
+		err = dma_fence_chain_find_seqno(&fence, seqno);
+		if (err) {
+			pr_err("Reported an invalid fence for find-self:%d\n",
+			       seqno);
+			dma_fence_put(fence);
+			break;
+		}
+
+		if (fence->seqno < seqno) {
+			pr_err("Reported an earlier fence.seqno:%lld for seqno:%d\n",
+			       fence->seqno, seqno);
+			err = -EINVAL;
+			dma_fence_put(fence);
+			break;
+		}
+
+		dma_fence_put(fence);
+
+signal:
+		seqno = prandom_u32_max(data->fc.chain_length - 1);
+		dma_fence_signal(data->fc.fences[seqno]);
+		cond_resched();
+	}
+
+	if (atomic_dec_and_test(&data->children))
+		wake_up_var(&data->children);
+	return err;
+}
+
+static int find_race(void *arg)
+{
+	struct find_race data;
+	int ncpus = num_online_cpus();
+	struct task_struct **threads;
+	unsigned long count;
+	int err;
+	int i;
+
+	err = fence_chains_init(&data.fc, CHAIN_SZ, seqno_inc);
+	if (err)
+		return err;
+
+	threads = kmalloc_array(ncpus, sizeof(*threads), GFP_KERNEL);
+	if (!threads) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	atomic_set(&data.children, 0);
+	for (i = 0; i < ncpus; i++) {
+		threads[i] = kthread_run(__find_race, &data, "dmabuf/%d", i);
+		if (IS_ERR(threads[i])) {
+			ncpus = i;
+			break;
+		}
+		atomic_inc(&data.children);
+		get_task_struct(threads[i]);
+	}
+
+	wait_var_event_timeout(&data.children,
+			       !atomic_read(&data.children),
+			       5 * HZ);
+
+	for (i = 0; i < ncpus; i++) {
+		int ret;
+
+		ret = kthread_stop(threads[i]);
+		if (ret && !err)
+			err = ret;
+		put_task_struct(threads[i]);
+	}
+	kfree(threads);
+
+	count = 0;
+	for (i = 0; i < data.fc.chain_length; i++)
+		if (dma_fence_is_signaled(data.fc.fences[i]))
+			count++;
+	pr_info("Completed %lu cycles\n", count);
+
+err:
+	fence_chains_fini(&data.fc);
+	return err;
+}
+
+static int signal_forward(void *arg)
+{
+	struct fence_chains fc;
+	int err;
+	int i;
+
+	err = fence_chains_init(&fc, 64, seqno_inc);
+	if (err)
+		return err;
+
+	for (i = 0; i < fc.chain_length; i++) {
+		dma_fence_signal(fc.fences[i]);
+
+		if (!dma_fence_is_signaled(fc.chains[i])) {
+			pr_err("chain[%d] not signaled!\n", i);
+			err = -EINVAL;
+			goto err;
+		}
+
+		if (i + 1 < fc.chain_length &&
+		    dma_fence_is_signaled(fc.chains[i + 1])) {
+			pr_err("chain[%d] is signaled!\n", i);
+			err = -EINVAL;
+			goto err;
+		}
+	}
+
+err:
+	fence_chains_fini(&fc);
+	return err;
+}
+
+static int signal_backward(void *arg)
+{
+	struct fence_chains fc;
+	int err;
+	int i;
+
+	err = fence_chains_init(&fc, 64, seqno_inc);
+	if (err)
+		return err;
+
+	for (i = fc.chain_length; i--; ) {
+		dma_fence_signal(fc.fences[i]);
+
+		if (i > 0 && dma_fence_is_signaled(fc.chains[i])) {
+			pr_err("chain[%d] is signaled!\n", i);
+			err = -EINVAL;
+			goto err;
+		}
+	}
+
+	for (i = 0; i < fc.chain_length; i++) {
+		if (!dma_fence_is_signaled(fc.chains[i])) {
+			pr_err("chain[%d] was not signaled!\n", i);
+			err = -EINVAL;
+			goto err;
+		}
+	}
+
+err:
+	fence_chains_fini(&fc);
+	return err;
+}
+
+static int __wait_fence_chains(void *arg)
+{
+	struct fence_chains *fc = arg;
+
+	if (dma_fence_wait(fc->tail, false))
+		return -EIO;
+
+	return 0;
+}
+
+static int wait_forward(void *arg)
+{
+	struct fence_chains fc;
+	struct task_struct *tsk;
+	int err;
+	int i;
+
+	err = fence_chains_init(&fc, CHAIN_SZ, seqno_inc);
+	if (err)
+		return err;
+
+	tsk = kthread_run(__wait_fence_chains, &fc, "dmabuf/wait");
+	if (IS_ERR(tsk)) {
+		err = PTR_ERR(tsk);
+		goto err;
+	}
+	get_task_struct(tsk);
+	yield_to(tsk, true);
+
+	for (i = 0; i < fc.chain_length; i++)
+		dma_fence_signal(fc.fences[i]);
+
+	err = kthread_stop(tsk);
+	put_task_struct(tsk);
+
+err:
+	fence_chains_fini(&fc);
+	return err;
+}
+
+static int wait_backward(void *arg)
+{
+	struct fence_chains fc;
+	struct task_struct *tsk;
+	int err;
+	int i;
+
+	err = fence_chains_init(&fc, CHAIN_SZ, seqno_inc);
+	if (err)
+		return err;
+
+	tsk = kthread_run(__wait_fence_chains, &fc, "dmabuf/wait");
+	if (IS_ERR(tsk)) {
+		err = PTR_ERR(tsk);
+		goto err;
+	}
+	get_task_struct(tsk);
+	yield_to(tsk, true);
+
+	for (i = fc.chain_length; i--; )
+		dma_fence_signal(fc.fences[i]);
+
+	err = kthread_stop(tsk);
+	put_task_struct(tsk);
+
+err:
+	fence_chains_fini(&fc);
+	return err;
+}
+
+static void randomise_fences(struct fence_chains *fc)
+{
+	unsigned int count = fc->chain_length;
+
+	/* Fisher-Yates shuffle courtesy of Knuth */
+	while (--count) {
+		unsigned int swp;
+
+		swp = prandom_u32_max(count + 1);
+		if (swp == count)
+			continue;
+
+		swap(fc->fences[count], fc->fences[swp]);
+	}
+}
+
+static int wait_random(void *arg)
+{
+	struct fence_chains fc;
+	struct task_struct *tsk;
+	int err;
+	int i;
+
+	err = fence_chains_init(&fc, CHAIN_SZ, seqno_inc);
+	if (err)
+		return err;
+
+	randomise_fences(&fc);
+
+	tsk = kthread_run(__wait_fence_chains, &fc, "dmabuf/wait");
+	if (IS_ERR(tsk)) {
+		err = PTR_ERR(tsk);
+		goto err;
+	}
+	get_task_struct(tsk);
+	yield_to(tsk, true);
+
+	for (i = 0; i < fc.chain_length; i++)
+		dma_fence_signal(fc.fences[i]);
+
+	err = kthread_stop(tsk);
+	put_task_struct(tsk);
+
+err:
+	fence_chains_fini(&fc);
+	return err;
+}
+
+int dma_fence_chain(void)
+{
+	static const struct subtest tests[] = {
+		SUBTEST(sanitycheck),
+		SUBTEST(find_seqno),
+		SUBTEST(find_signaled),
+		SUBTEST(find_out_of_order),
+		SUBTEST(find_gap),
+		SUBTEST(find_race),
+		SUBTEST(signal_forward),
+		SUBTEST(signal_backward),
+		SUBTEST(wait_forward),
+		SUBTEST(wait_backward),
+		SUBTEST(wait_random),
+	};
+	int ret;
+
+	pr_info("sizeof(dma_fence_chain)=%zu\n",
+		sizeof(struct dma_fence_chain));
+
+	slab_fences = KMEM_CACHE(mock_fence,
+				 SLAB_TYPESAFE_BY_RCU |
+				 SLAB_HWCACHE_ALIGN);
+	if (!slab_fences)
+		return -ENOMEM;
+
+	ret = subtests(tests, NULL);
+
+	kmem_cache_destroy(slab_fences);
+	return ret;
+}
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 092483644315..e9ed9165de40 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -106,7 +106,7 @@ config AXI_DMAC
 	select REGMAP_MMIO
 	help
 	  Enable support for the Analog Devices AXI-DMAC peripheral. This DMA
-	  controller is often used in Analog Device's reference designs for FPGA
+	  controller is often used in Analog Devices' reference designs for FPGA
 	  platforms.
 
 config BCM_SBA_RAID
@@ -241,7 +241,8 @@ config FSL_RAID
 
 config HISI_DMA
 	tristate "HiSilicon DMA Engine support"
-	depends on ARM64 || (COMPILE_TEST && PCI_MSI)
+	depends on ARM64 || COMPILE_TEST
+	depends on PCI_MSI
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
@@ -394,12 +395,10 @@ config MMP_TDMA
 	bool "MMP Two-Channel DMA support"
 	depends on ARCH_MMP || COMPILE_TEST
 	select DMA_ENGINE
-	select MMP_SRAM if ARCH_MMP
 	select GENERIC_ALLOCATOR
 	help
 	  Support the MMP Two-Channel DMA engine.
 	  This engine used for MMP Audio DMA and pxa910 SQU.
-	  It needs sram driver under mach-mmp.
 
 config MOXART_DMA
 	tristate "MOXART DMA support"
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 397692e937b3..80fc2fe8c77e 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -331,7 +331,7 @@ struct at_dma {
 	struct dma_pool		*dma_desc_pool;
 	struct dma_pool		*memset_pool;
 	/* AT THE END channels table */
-	struct at_dma_chan	chan[0];
+	struct at_dma_chan	chan[];
 };
 
 #define	dma_readl(atdma, name) \
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index bb0eaf38b594..fd92f048c491 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -212,7 +212,7 @@ struct at_xdmac {
 	struct clk		*clk;
 	u32			save_gim;
 	struct dma_pool		*at_xdmac_desc_pool;
-	struct at_xdmac_chan	chan[0];
+	struct at_xdmac_chan	chan[];
 };
 
 
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 4830ba658ce1..d31076d9ef25 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -232,10 +232,6 @@ static void chan_dev_release(struct device *dev)
 	struct dma_chan_dev *chan_dev;
 
 	chan_dev = container_of(dev, typeof(*chan_dev), device);
-	if (atomic_dec_and_test(chan_dev->idr_ref)) {
-		ida_free(&dma_ida, chan_dev->dev_id);
-		kfree(chan_dev->idr_ref);
-	}
 	kfree(chan_dev);
 }
 
@@ -1043,27 +1039,9 @@ static int get_dma_id(struct dma_device *device)
 }
 
 static int __dma_async_device_channel_register(struct dma_device *device,
-					       struct dma_chan *chan,
-					       int chan_id)
+					       struct dma_chan *chan)
 {
 	int rc = 0;
-	int chancnt = device->chancnt;
-	atomic_t *idr_ref;
-	struct dma_chan *tchan;
-
-	tchan = list_first_entry_or_null(&device->channels,
-					 struct dma_chan, device_node);
-	if (!tchan)
-		return -ENODEV;
-
-	if (tchan->dev) {
-		idr_ref = tchan->dev->idr_ref;
-	} else {
-		idr_ref = kmalloc(sizeof(*idr_ref), GFP_KERNEL);
-		if (!idr_ref)
-			return -ENOMEM;
-		atomic_set(idr_ref, 0);
-	}
 
 	chan->local = alloc_percpu(typeof(*chan->local));
 	if (!chan->local)
@@ -1079,29 +1057,36 @@ static int __dma_async_device_channel_register(struct dma_device *device,
 	 * When the chan_id is a negative value, we are dynamically adding
 	 * the channel. Otherwise we are static enumerating.
 	 */
-	chan->chan_id = chan_id < 0 ? chancnt : chan_id;
+	mutex_lock(&device->chan_mutex);
+	chan->chan_id = ida_alloc(&device->chan_ida, GFP_KERNEL);
+	mutex_unlock(&device->chan_mutex);
+	if (chan->chan_id < 0) {
+		pr_err("%s: unable to alloc ida for chan: %d\n",
+		       __func__, chan->chan_id);
+		goto err_out;
+	}
+
 	chan->dev->device.class = &dma_devclass;
 	chan->dev->device.parent = device->dev;
 	chan->dev->chan = chan;
-	chan->dev->idr_ref = idr_ref;
 	chan->dev->dev_id = device->dev_id;
-	atomic_inc(idr_ref);
 	dev_set_name(&chan->dev->device, "dma%dchan%d",
 		     device->dev_id, chan->chan_id);
-
 	rc = device_register(&chan->dev->device);
 	if (rc)
-		goto err_out;
+		goto err_out_ida;
 	chan->client_count = 0;
-	device->chancnt = chan->chan_id + 1;
+	device->chancnt++;
 
 	return 0;
 
+ err_out_ida:
+	mutex_lock(&device->chan_mutex);
+	ida_free(&device->chan_ida, chan->chan_id);
+	mutex_unlock(&device->chan_mutex);
  err_out:
 	free_percpu(chan->local);
 	kfree(chan->dev);
-	if (atomic_dec_return(idr_ref) == 0)
-		kfree(idr_ref);
 	return rc;
 }
 
@@ -1110,7 +1095,7 @@ int dma_async_device_channel_register(struct dma_device *device,
 {
 	int rc;
 
-	rc = __dma_async_device_channel_register(device, chan, -1);
+	rc = __dma_async_device_channel_register(device, chan);
 	if (rc < 0)
 		return rc;
 
@@ -1130,6 +1115,9 @@ static void __dma_async_device_channel_unregister(struct dma_device *device,
 	device->chancnt--;
 	chan->dev->chan = NULL;
 	mutex_unlock(&dma_list_mutex);
+	mutex_lock(&device->chan_mutex);
+	ida_free(&device->chan_ida, chan->chan_id);
+	mutex_unlock(&device->chan_mutex);
 	device_unregister(&chan->dev->device);
 	free_percpu(chan->local);
 }
@@ -1152,7 +1140,7 @@ EXPORT_SYMBOL_GPL(dma_async_device_channel_unregister);
  */
 int dma_async_device_register(struct dma_device *device)
 {
-	int rc, i = 0;
+	int rc;
 	struct dma_chan* chan;
 
 	if (!device)
@@ -1257,9 +1245,12 @@ int dma_async_device_register(struct dma_device *device)
 	if (rc != 0)
 		return rc;
 
+	mutex_init(&device->chan_mutex);
+	ida_init(&device->chan_ida);
+
 	/* represent channels in sysfs. Probably want devs too */
 	list_for_each_entry(chan, &device->channels, device_node) {
-		rc = __dma_async_device_channel_register(device, chan, i++);
+		rc = __dma_async_device_channel_register(device, chan);
 		if (rc < 0)
 			goto err_out;
 	}
@@ -1334,6 +1325,7 @@ void dma_async_device_unregister(struct dma_device *device)
 	 */
 	dma_cap_set(DMA_PRIVATE, device->cap_mask);
 	dma_channel_rebalance();
+	ida_free(&dma_ida, device->dev_id);
 	dma_device_put(device);
 	mutex_unlock(&dma_list_mutex);
 }
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index a2cadfa2e6d7..c1ebc538404d 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -60,9 +60,9 @@ MODULE_PARM_DESC(pq_sources,
 		"Number of p+q source buffers (default: 3)");
 
 static int timeout = 3000;
-module_param(timeout, uint, S_IRUGO | S_IWUSR);
+module_param(timeout, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), "
-		 "Pass 0xFFFFFFFF (4294967295) for maximum timeout");
+		 "Pass -1 for infinite timeout");
 
 static bool noverify;
 module_param(noverify, bool, S_IRUGO | S_IWUSR);
@@ -72,10 +72,6 @@ static bool norandom;
 module_param(norandom, bool, 0644);
 MODULE_PARM_DESC(norandom, "Disable random offset setup (default: random)");
 
-static bool polled;
-module_param(polled, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(polled, "Use polling for completion instead of interrupts");
-
 static bool verbose;
 module_param(verbose, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(verbose, "Enable \"success\" result messages (default: off)");
@@ -88,6 +84,10 @@ static unsigned int transfer_size;
 module_param(transfer_size, uint, 0644);
 MODULE_PARM_DESC(transfer_size, "Optional custom transfer size in bytes (default: not used (0))");
 
+static bool polled;
+module_param(polled, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(polled, "Use polling for completion instead of interrupts");
+
 /**
  * struct dmatest_params - test parameters.
  * @buf_size:		size of the memcpy test buffer
@@ -98,7 +98,12 @@ MODULE_PARM_DESC(transfer_size, "Optional custom transfer size in bytes (default
  * @iterations:		iterations before stopping test
  * @xor_sources:	number of xor source buffers
  * @pq_sources:		number of p+q source buffers
- * @timeout:		transfer timeout in msec, 0 - 0xFFFFFFFF (4294967295)
+ * @timeout:		transfer timeout in msec, -1 for infinite timeout
+ * @noverify:		disable data verification
+ * @norandom:		disable random offset setup
+ * @alignment:		custom data address alignment taken as 2^alignment
+ * @transfer_size:	custom transfer size in bytes
+ * @polled:		use polling for completion instead of interrupts
  */
 struct dmatest_params {
 	unsigned int	buf_size;
@@ -109,7 +114,7 @@ struct dmatest_params {
 	unsigned int	iterations;
 	unsigned int	xor_sources;
 	unsigned int	pq_sources;
-	unsigned int	timeout;
+	int		timeout;
 	bool		noverify;
 	bool		norandom;
 	int		alignment;
@@ -120,7 +125,10 @@ struct dmatest_params {
 /**
  * struct dmatest_info - test information.
  * @params:		test parameters
+ * @channels:		channels under test
+ * @nr_channels:	number of channels under test
  * @lock:		access protection to the fields of this structure
+ * @did_init:		module has been initialized completely
  */
 static struct dmatest_info {
 	/* Test parameters */
@@ -240,7 +248,7 @@ static bool is_threaded_test_run(struct dmatest_info *info)
 		struct dmatest_thread *thread;
 
 		list_for_each_entry(thread, &dtc->threads, node) {
-			if (!thread->done)
+			if (!thread->done && !thread->pending)
 				return true;
 		}
 	}
@@ -662,8 +670,8 @@ static int dmatest_func(void *data)
 		flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
 
 	ktime = ktime_get();
-	while (!kthread_should_stop()
-	       && !(params->iterations && total_tests >= params->iterations)) {
+	while (!(kthread_should_stop() ||
+	       (params->iterations && total_tests >= params->iterations))) {
 		struct dma_async_tx_descriptor *tx = NULL;
 		struct dmaengine_unmap_data *um;
 		dma_addr_t *dsts;
diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
index ff392c01bad1..306ab50462be 100644
--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -13,8 +13,9 @@
 #include <linux/dmaengine.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/dma/edma.h>
-#include <linux/pci.h>
+#include <linux/dma-mapping.h>
 
 #include "dw-edma-core.h"
 #include "dw-edma-v0-core.h"
@@ -773,6 +774,7 @@ static int dw_edma_irq_request(struct dw_edma_chip *chip,
 	u32 rd_mask = 1;
 	int i, err = 0;
 	u32 ch_cnt;
+	int irq;
 
 	ch_cnt = dw->wr_ch_cnt + dw->rd_ch_cnt;
 
@@ -781,16 +783,16 @@ static int dw_edma_irq_request(struct dw_edma_chip *chip,
 
 	if (dw->nr_irqs == 1) {
 		/* Common IRQ shared among all channels */
-		err = request_irq(pci_irq_vector(to_pci_dev(dev), 0),
-				  dw_edma_interrupt_common,
+		irq = dw->ops->irq_vector(dev, 0);
+		err = request_irq(irq, dw_edma_interrupt_common,
 				  IRQF_SHARED, dw->name, &dw->irq[0]);
 		if (err) {
 			dw->nr_irqs = 0;
 			return err;
 		}
 
-		get_cached_msi_msg(pci_irq_vector(to_pci_dev(dev), 0),
-				   &dw->irq[0].msi);
+		if (irq_get_msi_desc(irq))
+			get_cached_msi_msg(irq, &dw->irq[0].msi);
 	} else {
 		/* Distribute IRQs equally among all channels */
 		int tmp = dw->nr_irqs;
@@ -804,7 +806,8 @@ static int dw_edma_irq_request(struct dw_edma_chip *chip,
 		dw_edma_add_irq_mask(&rd_mask, *rd_alloc, dw->rd_ch_cnt);
 
 		for (i = 0; i < (*wr_alloc + *rd_alloc); i++) {
-			err = request_irq(pci_irq_vector(to_pci_dev(dev), i),
+			irq = dw->ops->irq_vector(dev, i);
+			err = request_irq(irq,
 					  i < *wr_alloc ?
 						dw_edma_interrupt_write :
 						dw_edma_interrupt_read,
@@ -815,8 +818,8 @@ static int dw_edma_irq_request(struct dw_edma_chip *chip,
 				return err;
 			}
 
-			get_cached_msi_msg(pci_irq_vector(to_pci_dev(dev), i),
-					   &dw->irq[i].msi);
+			if (irq_get_msi_desc(irq))
+				get_cached_msi_msg(irq, &dw->irq[i].msi);
 		}
 
 		dw->nr_irqs = i;
@@ -827,12 +830,23 @@ static int dw_edma_irq_request(struct dw_edma_chip *chip,
 
 int dw_edma_probe(struct dw_edma_chip *chip)
 {
-	struct device *dev = chip->dev;
-	struct dw_edma *dw = chip->dw;
+	struct device *dev;
+	struct dw_edma *dw;
 	u32 wr_alloc = 0;
 	u32 rd_alloc = 0;
 	int i, err;
 
+	if (!chip)
+		return -EINVAL;
+
+	dev = chip->dev;
+	if (!dev)
+		return -EINVAL;
+
+	dw = chip->dw;
+	if (!dw || !dw->irq || !dw->ops || !dw->ops->irq_vector)
+		return -EINVAL;
+
 	raw_spin_lock_init(&dw->lock);
 
 	/* Find out how many write channels are supported by hardware */
@@ -884,7 +898,7 @@ int dw_edma_probe(struct dw_edma_chip *chip)
 
 err_irq_free:
 	for (i = (dw->nr_irqs - 1); i >= 0; i--)
-		free_irq(pci_irq_vector(to_pci_dev(dev), i), &dw->irq[i]);
+		free_irq(dw->ops->irq_vector(dev, i), &dw->irq[i]);
 
 	dw->nr_irqs = 0;
 
@@ -904,7 +918,7 @@ int dw_edma_remove(struct dw_edma_chip *chip)
 
 	/* Free irqs */
 	for (i = (dw->nr_irqs - 1); i >= 0; i--)
-		free_irq(pci_irq_vector(to_pci_dev(dev), i), &dw->irq[i]);
+		free_irq(dw->ops->irq_vector(dev, i), &dw->irq[i]);
 
 	/* Power management */
 	pm_runtime_disable(dev);
diff --git a/drivers/dma/dw-edma/dw-edma-core.h b/drivers/dma/dw-edma/dw-edma-core.h
index 4e5f9f6e901b..31fc50d31792 100644
--- a/drivers/dma/dw-edma/dw-edma-core.h
+++ b/drivers/dma/dw-edma/dw-edma-core.h
@@ -103,6 +103,10 @@ struct dw_edma_irq {
 	struct dw_edma			*dw;
 };
 
+struct dw_edma_core_ops {
+	int	(*irq_vector)(struct device *dev, unsigned int nr);
+};
+
 struct dw_edma {
 	char				name[20];
 
diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
index dc85f55e1bb8..1eafc602e17e 100644
--- a/drivers/dma/dw-edma/dw-edma-pcie.c
+++ b/drivers/dma/dw-edma/dw-edma-pcie.c
@@ -54,6 +54,15 @@ static const struct dw_edma_pcie_data snps_edda_data = {
 	.irqs				= 1,
 };
 
+static int dw_edma_pcie_irq_vector(struct device *dev, unsigned int nr)
+{
+	return pci_irq_vector(to_pci_dev(dev), nr);
+}
+
+static const struct dw_edma_core_ops dw_edma_pcie_core_ops = {
+	.irq_vector = dw_edma_pcie_irq_vector,
+};
+
 static int dw_edma_pcie_probe(struct pci_dev *pdev,
 			      const struct pci_device_id *pid)
 {
@@ -151,6 +160,7 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
 	dw->version = pdata->version;
 	dw->mode = pdata->mode;
 	dw->nr_irqs = nr_irqs;
+	dw->ops = &dw_edma_pcie_core_ops;
 
 	/* Debug info */
 	pci_dbg(pdev, "Version:\t%u\n", dw->version);
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 3999827970ab..052dae5d6ddd 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -1092,6 +1092,16 @@ static const struct attribute_group *idxd_wq_attribute_groups[] = {
 };
 
 /* IDXD device attribs */
+static ssize_t version_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct idxd_device *idxd =
+		container_of(dev, struct idxd_device, conf_dev);
+
+	return sprintf(buf, "%#x\n", idxd->hw.version);
+}
+static DEVICE_ATTR_RO(version);
+
 static ssize_t max_work_queues_size_show(struct device *dev,
 					 struct device_attribute *attr,
 					 char *buf)
@@ -1313,6 +1323,7 @@ static ssize_t cdev_major_show(struct device *dev,
 static DEVICE_ATTR_RO(cdev_major);
 
 static struct attribute *idxd_device_attributes[] = {
+	&dev_attr_version.attr,
 	&dev_attr_max_groups.attr,
 	&dev_attr_max_work_queues.attr,
 	&dev_attr_max_work_queues_size.attr,
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index 18c011e57592..8ad0ad861c86 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -332,8 +332,8 @@ ioat_alloc_ring_ent(struct dma_chan *chan, int idx, gfp_t flags)
 	u8 *pos;
 	off_t offs;
 
-	chunk = idx / IOAT_DESCS_PER_2M;
-	idx &= (IOAT_DESCS_PER_2M - 1);
+	chunk = idx / IOAT_DESCS_PER_CHUNK;
+	idx &= (IOAT_DESCS_PER_CHUNK - 1);
 	offs = idx * IOAT_DESC_SZ;
 	pos = (u8 *)ioat_chan->descs[chunk].virt + offs;
 	phys = ioat_chan->descs[chunk].hw + offs;
@@ -370,7 +370,8 @@ ioat_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
 	if (!ring)
 		return NULL;
 
-	ioat_chan->desc_chunks = chunks = (total_descs * IOAT_DESC_SZ) / SZ_2M;
+	chunks = (total_descs * IOAT_DESC_SZ) / IOAT_CHUNK_SIZE;
+	ioat_chan->desc_chunks = chunks;
 
 	for (i = 0; i < chunks; i++) {
 		struct ioat_descs *descs = &ioat_chan->descs[i];
@@ -382,8 +383,9 @@ ioat_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
 
 			for (idx = 0; idx < i; idx++) {
 				descs = &ioat_chan->descs[idx];
-				dma_free_coherent(to_dev(ioat_chan), SZ_2M,
-						  descs->virt, descs->hw);
+				dma_free_coherent(to_dev(ioat_chan),
+						IOAT_CHUNK_SIZE,
+						descs->virt, descs->hw);
 				descs->virt = NULL;
 				descs->hw = 0;
 			}
@@ -404,7 +406,7 @@ ioat_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
 
 			for (idx = 0; idx < ioat_chan->desc_chunks; idx++) {
 				dma_free_coherent(to_dev(ioat_chan),
-						  SZ_2M,
+						  IOAT_CHUNK_SIZE,
 						  ioat_chan->descs[idx].virt,
 						  ioat_chan->descs[idx].hw);
 				ioat_chan->descs[idx].virt = NULL;
@@ -867,6 +869,23 @@ static void check_active(struct ioatdma_chan *ioat_chan)
 		mod_timer(&ioat_chan->timer, jiffies + IDLE_TIMEOUT);
 }
 
+static void ioat_reboot_chan(struct ioatdma_chan *ioat_chan)
+{
+	spin_lock_bh(&ioat_chan->prep_lock);
+	set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
+	spin_unlock_bh(&ioat_chan->prep_lock);
+
+	ioat_abort_descs(ioat_chan);
+	dev_warn(to_dev(ioat_chan), "Reset channel...\n");
+	ioat_reset_hw(ioat_chan);
+	dev_warn(to_dev(ioat_chan), "Restart channel...\n");
+	ioat_restart_channel(ioat_chan);
+
+	spin_lock_bh(&ioat_chan->prep_lock);
+	clear_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
+	spin_unlock_bh(&ioat_chan->prep_lock);
+}
+
 void ioat_timer_event(struct timer_list *t)
 {
 	struct ioatdma_chan *ioat_chan = from_timer(ioat_chan, t, timer);
@@ -889,19 +908,7 @@ void ioat_timer_event(struct timer_list *t)
 
 		if (test_bit(IOAT_RUN, &ioat_chan->state)) {
 			spin_lock_bh(&ioat_chan->cleanup_lock);
-			spin_lock_bh(&ioat_chan->prep_lock);
-			set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
-			spin_unlock_bh(&ioat_chan->prep_lock);
-
-			ioat_abort_descs(ioat_chan);
-			dev_warn(to_dev(ioat_chan), "Reset channel...\n");
-			ioat_reset_hw(ioat_chan);
-			dev_warn(to_dev(ioat_chan), "Restart channel...\n");
-			ioat_restart_channel(ioat_chan);
-
-			spin_lock_bh(&ioat_chan->prep_lock);
-			clear_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
-			spin_unlock_bh(&ioat_chan->prep_lock);
+			ioat_reboot_chan(ioat_chan);
 			spin_unlock_bh(&ioat_chan->cleanup_lock);
 		}
 
@@ -915,17 +922,23 @@ void ioat_timer_event(struct timer_list *t)
 		spin_lock_bh(&ioat_chan->prep_lock);
 		check_active(ioat_chan);
 		spin_unlock_bh(&ioat_chan->prep_lock);
-		spin_unlock_bh(&ioat_chan->cleanup_lock);
-		return;
+		goto unlock_out;
+	}
+
+	/* handle the missed cleanup case */
+	if (ioat_cleanup_preamble(ioat_chan, &phys_complete)) {
+		/* timer restarted in ioat_cleanup_preamble
+		 * and IOAT_COMPLETION_ACK cleared
+		 */
+		__cleanup(ioat_chan, phys_complete);
+		goto unlock_out;
 	}
 
 	/* if we haven't made progress and we have already
 	 * acknowledged a pending completion once, then be more
 	 * forceful with a restart
 	 */
-	if (ioat_cleanup_preamble(ioat_chan, &phys_complete))
-		__cleanup(ioat_chan, phys_complete);
-	else if (test_bit(IOAT_COMPLETION_ACK, &ioat_chan->state)) {
+	if (test_bit(IOAT_COMPLETION_ACK, &ioat_chan->state)) {
 		u32 chanerr;
 
 		chanerr = readl(ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
@@ -937,25 +950,23 @@ void ioat_timer_event(struct timer_list *t)
 		dev_dbg(to_dev(ioat_chan), "Active descriptors: %d\n",
 			ioat_ring_active(ioat_chan));
 
-		spin_lock_bh(&ioat_chan->prep_lock);
-		set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
-		spin_unlock_bh(&ioat_chan->prep_lock);
+		ioat_reboot_chan(ioat_chan);
 
-		ioat_abort_descs(ioat_chan);
-		dev_warn(to_dev(ioat_chan), "Resetting channel...\n");
-		ioat_reset_hw(ioat_chan);
-		dev_warn(to_dev(ioat_chan), "Restarting channel...\n");
-		ioat_restart_channel(ioat_chan);
+		goto unlock_out;
+	}
 
+	/* handle missed issue pending case */
+	if (ioat_ring_pending(ioat_chan)) {
+		dev_warn(to_dev(ioat_chan),
+			"Completion timeout with pending descriptors\n");
 		spin_lock_bh(&ioat_chan->prep_lock);
-		clear_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
+		__ioat_issue_pending(ioat_chan);
 		spin_unlock_bh(&ioat_chan->prep_lock);
-		spin_unlock_bh(&ioat_chan->cleanup_lock);
-		return;
-	} else
-		set_bit(IOAT_COMPLETION_ACK, &ioat_chan->state);
+	}
 
+	set_bit(IOAT_COMPLETION_ACK, &ioat_chan->state);
 	mod_timer(&ioat_chan->timer, jiffies + COMPLETION_TIMEOUT);
+unlock_out:
 	spin_unlock_bh(&ioat_chan->cleanup_lock);
 }
 
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index b8e8e0b9693c..e6b622e1ba92 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -81,6 +81,11 @@ struct ioatdma_device {
 	u32 msixpba;
 };
 
+#define IOAT_MAX_ORDER 16
+#define IOAT_MAX_DESCS (1 << IOAT_MAX_ORDER)
+#define IOAT_CHUNK_SIZE (SZ_512K)
+#define IOAT_DESCS_PER_CHUNK (IOAT_CHUNK_SIZE / IOAT_DESC_SZ)
+
 struct ioat_descs {
 	void *virt;
 	dma_addr_t hw;
@@ -128,7 +133,7 @@ struct ioatdma_chan {
 	u16 produce;
 	struct ioat_ring_ent **ring;
 	spinlock_t prep_lock;
-	struct ioat_descs descs[2];
+	struct ioat_descs descs[IOAT_MAX_DESCS / IOAT_DESCS_PER_CHUNK];
 	int desc_chunks;
 	int intr_coalesce;
 	int prev_intr_coalesce;
@@ -301,9 +306,6 @@ static inline bool is_ioat_bug(unsigned long err)
 	return !!err;
 }
 
-#define IOAT_MAX_ORDER 16
-#define IOAT_MAX_DESCS 65536
-#define IOAT_DESCS_PER_2M 32768
 
 static inline u32 ioat_ring_size(struct ioatdma_chan *ioat_chan)
 {
diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index 60e9afbb896c..58d13564f88b 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -651,7 +651,7 @@ static void ioat_free_chan_resources(struct dma_chan *c)
 	}
 
 	for (i = 0; i < ioat_chan->desc_chunks; i++) {
-		dma_free_coherent(to_dev(ioat_chan), SZ_2M,
+		dma_free_coherent(to_dev(ioat_chan), IOAT_CHUNK_SIZE,
 				  ioat_chan->descs[i].virt,
 				  ioat_chan->descs[i].hw);
 		ioat_chan->descs[i].virt = NULL;
diff --git a/drivers/dma/milbeaut-hdmac.c b/drivers/dma/milbeaut-hdmac.c
index 8853d442430b..a8cfb59f6efe 100644
--- a/drivers/dma/milbeaut-hdmac.c
+++ b/drivers/dma/milbeaut-hdmac.c
@@ -77,7 +77,7 @@ struct milbeaut_hdmac_device {
 	struct dma_device ddev;
 	struct clk *clk;
 	void __iomem *reg_base;
-	struct milbeaut_hdmac_chan channels[0];
+	struct milbeaut_hdmac_chan channels[];
 };
 
 static struct milbeaut_hdmac_chan *
diff --git a/drivers/dma/milbeaut-xdmac.c b/drivers/dma/milbeaut-xdmac.c
index ab3d2f395378..85a597228fb0 100644
--- a/drivers/dma/milbeaut-xdmac.c
+++ b/drivers/dma/milbeaut-xdmac.c
@@ -74,7 +74,7 @@ struct milbeaut_xdmac_chan {
 struct milbeaut_xdmac_device {
 	struct dma_device ddev;
 	void __iomem *reg_base;
-	struct milbeaut_xdmac_chan channels[0];
+	struct milbeaut_xdmac_chan channels[];
 };
 
 static struct milbeaut_xdmac_chan *
diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c
index 10117f271b12..dbc6a48424fa 100644
--- a/drivers/dma/mmp_tdma.c
+++ b/drivers/dma/mmp_tdma.c
@@ -235,7 +235,7 @@ static int mmp_tdma_config_chan(struct dma_chan *chan)
 			tdcr |= TDCR_BURSTSZ_128B;
 			break;
 		default:
-			dev_err(tdmac->dev, "mmp_tdma: unknown burst size.\n");
+			dev_err(tdmac->dev, "unknown burst size.\n");
 			return -EINVAL;
 		}
 
@@ -250,7 +250,7 @@ static int mmp_tdma_config_chan(struct dma_chan *chan)
 			tdcr |= TDCR_SSZ_32_BITS;
 			break;
 		default:
-			dev_err(tdmac->dev, "mmp_tdma: unknown bus size.\n");
+			dev_err(tdmac->dev, "unknown bus size.\n");
 			return -EINVAL;
 		}
 	} else if (tdmac->type == PXA910_SQU) {
@@ -276,7 +276,7 @@ static int mmp_tdma_config_chan(struct dma_chan *chan)
 			tdcr |= TDCR_BURSTSZ_SQU_32B;
 			break;
 		default:
-			dev_err(tdmac->dev, "mmp_tdma: unknown burst size.\n");
+			dev_err(tdmac->dev, "unknown burst size.\n");
 			return -EINVAL;
 		}
 	}
@@ -363,6 +363,8 @@ static void mmp_tdma_free_descriptor(struct mmp_tdma_chan *tdmac)
 		gen_pool_free(gpool, (unsigned long)tdmac->desc_arr,
 				size);
 	tdmac->desc_arr = NULL;
+	if (tdmac->status == DMA_ERROR)
+		tdmac->status = DMA_COMPLETE;
 
 	return;
 }
@@ -427,8 +429,15 @@ static struct dma_async_tx_descriptor *mmp_tdma_prep_dma_cyclic(
 	int num_periods = buf_len / period_len;
 	int i = 0, buf = 0;
 
-	if (tdmac->status != DMA_COMPLETE)
+	if (!is_slave_direction(direction)) {
+		dev_err(tdmac->dev, "unsupported transfer direction\n");
 		return NULL;
+	}
+
+	if (tdmac->status != DMA_COMPLETE) {
+		dev_err(tdmac->dev, "controller busy");
+		return NULL;
+	}
 
 	if (period_len > TDMA_MAX_XFER_BYTES) {
 		dev_err(tdmac->dev,
@@ -443,7 +452,8 @@ static struct dma_async_tx_descriptor *mmp_tdma_prep_dma_cyclic(
 	if (!desc)
 		goto err_out;
 
-	mmp_tdma_config_write(chan, direction, &tdmac->slave_config);
+	if (mmp_tdma_config_write(chan, direction, &tdmac->slave_config))
+		goto err_out;
 
 	while (buf < buf_len) {
 		desc = &tdmac->desc_arr[i];
@@ -701,6 +711,17 @@ static int mmp_tdma_probe(struct platform_device *pdev)
 	tdev->device.device_terminate_all = mmp_tdma_terminate_all;
 	tdev->device.copy_align = DMAENGINE_ALIGN_8_BYTES;
 
+	tdev->device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	if (type == MMP_AUD_TDMA) {
+		tdev->device.max_burst = SZ_128;
+		tdev->device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+		tdev->device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	} else if (type == PXA910_SQU) {
+		tdev->device.max_burst = SZ_32;
+	}
+	tdev->device.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+	tdev->device.descriptor_reuse = true;
+
 	dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
 	platform_set_drvdata(pdev, tdev);
 
diff --git a/drivers/dma/moxart-dma.c b/drivers/dma/moxart-dma.c
index e04499c1f27f..2a77fa319d78 100644
--- a/drivers/dma/moxart-dma.c
+++ b/drivers/dma/moxart-dma.c
@@ -127,7 +127,7 @@ struct moxart_desc {
 	unsigned int			dma_cycles;
 	struct virt_dma_desc		vd;
 	uint8_t				es;
-	struct moxart_sg		sg[0];
+	struct moxart_sg		sg[];
 };
 
 struct moxart_chan {
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 581e7a290d98..a3b0b4c56a19 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -865,6 +865,7 @@ static int pch_dma_probe(struct pci_dev *pdev,
 	}
 
 	pci_set_master(pdev);
+	pd->dma.dev = &pdev->dev;
 
 	err = request_irq(pdev->irq, pd_irq, IRQF_SHARED, DRV_NAME, pd);
 	if (err) {
@@ -880,7 +881,6 @@ static int pch_dma_probe(struct pci_dev *pdev,
 		goto err_free_irq;
 	}
 
-	pd->dma.dev = &pdev->dev;
 
 	INIT_LIST_HEAD(&pd->dma.channels);
 
diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index ef73f65224b1..5a08dd0d3388 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -74,7 +74,7 @@ struct bam_async_desc {
 	struct list_head desc_node;
 	enum dma_transfer_direction dir;
 	size_t length;
-	struct bam_desc_hw desc[0];
+	struct bam_desc_hw desc[];
 };
 
 enum bam_reg {
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 411f91fde734..87490e125bc3 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -897,7 +897,6 @@ static int hidma_probe(struct platform_device *pdev)
 	if (msi)
 		hidma_free_msis(dmadev);
 
-	hidma_debug_uninit(dmadev);
 	hidma_ll_uninit(dmadev->lldev);
 dmafree:
 	if (dmadev)
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 0ddbaa4b4f0b..96ad1b3d24c6 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -117,6 +117,7 @@
 #define STM32_DMA_FIFO_THRESHOLD_HALFFULL		0x01
 #define STM32_DMA_FIFO_THRESHOLD_3QUARTERSFULL		0x02
 #define STM32_DMA_FIFO_THRESHOLD_FULL			0x03
+#define STM32_DMA_FIFO_THRESHOLD_NONE			0x04
 
 #define STM32_DMA_MAX_DATA_ITEMS	0xffff
 /*
@@ -136,6 +137,9 @@
 /* DMA Features */
 #define STM32_DMA_THRESHOLD_FTR_MASK	GENMASK(1, 0)
 #define STM32_DMA_THRESHOLD_FTR_GET(n)	((n) & STM32_DMA_THRESHOLD_FTR_MASK)
+#define STM32_DMA_DIRECT_MODE_MASK	BIT(2)
+#define STM32_DMA_DIRECT_MODE_GET(n)	(((n) & STM32_DMA_DIRECT_MODE_MASK) \
+					 >> 2)
 
 enum stm32_dma_width {
 	STM32_DMA_BYTE,
@@ -281,6 +285,9 @@ static bool stm32_dma_fifo_threshold_is_allowed(u32 burst, u32 threshold,
 {
 	u32 remaining;
 
+	if (threshold == STM32_DMA_FIFO_THRESHOLD_NONE)
+		return false;
+
 	if (width != DMA_SLAVE_BUSWIDTH_UNDEFINED) {
 		if (burst != 0) {
 			/*
@@ -302,6 +309,10 @@ static bool stm32_dma_fifo_threshold_is_allowed(u32 burst, u32 threshold,
 
 static bool stm32_dma_is_burst_possible(u32 buf_len, u32 threshold)
 {
+	/* If FIFO direct mode, burst is not possible */
+	if (threshold == STM32_DMA_FIFO_THRESHOLD_NONE)
+		return false;
+
 	/*
 	 * Buffer or period length has to be aligned on FIFO depth.
 	 * Otherwise bytes may be stuck within FIFO at buffer or period
@@ -657,6 +668,12 @@ static irqreturn_t stm32_dma_chan_irq(int irq, void *devid)
 				dev_dbg(chan2dev(chan), "FIFO over/underrun\n");
 		}
 	}
+	if (status & STM32_DMA_DMEI) {
+		stm32_dma_irq_clear(chan, STM32_DMA_DMEI);
+		status &= ~STM32_DMA_DMEI;
+		if (sfcr & STM32_DMA_SCR_DMEIE)
+			dev_dbg(chan2dev(chan), "Direct mode overrun\n");
+	}
 	if (status) {
 		stm32_dma_irq_clear(chan, status);
 		dev_err(chan2dev(chan), "DMA error: status=0x%08x\n", status);
@@ -692,13 +709,13 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 	int src_bus_width, dst_bus_width;
 	int src_burst_size, dst_burst_size;
 	u32 src_maxburst, dst_maxburst, src_best_burst, dst_best_burst;
-	u32 dma_scr, threshold;
+	u32 dma_scr, fifoth;
 
 	src_addr_width = chan->dma_sconfig.src_addr_width;
 	dst_addr_width = chan->dma_sconfig.dst_addr_width;
 	src_maxburst = chan->dma_sconfig.src_maxburst;
 	dst_maxburst = chan->dma_sconfig.dst_maxburst;
-	threshold = chan->threshold;
+	fifoth = chan->threshold;
 
 	switch (direction) {
 	case DMA_MEM_TO_DEV:
@@ -710,7 +727,7 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 		/* Set device burst size */
 		dst_best_burst = stm32_dma_get_best_burst(buf_len,
 							  dst_maxburst,
-							  threshold,
+							  fifoth,
 							  dst_addr_width);
 
 		dst_burst_size = stm32_dma_get_burst(chan, dst_best_burst);
@@ -718,7 +735,7 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 			return dst_burst_size;
 
 		/* Set memory data size */
-		src_addr_width = stm32_dma_get_max_width(buf_len, threshold);
+		src_addr_width = stm32_dma_get_max_width(buf_len, fifoth);
 		chan->mem_width = src_addr_width;
 		src_bus_width = stm32_dma_get_width(chan, src_addr_width);
 		if (src_bus_width < 0)
@@ -728,7 +745,7 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 		src_maxburst = STM32_DMA_MAX_BURST;
 		src_best_burst = stm32_dma_get_best_burst(buf_len,
 							  src_maxburst,
-							  threshold,
+							  fifoth,
 							  src_addr_width);
 		src_burst_size = stm32_dma_get_burst(chan, src_best_burst);
 		if (src_burst_size < 0)
@@ -742,7 +759,8 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 
 		/* Set FIFO threshold */
 		chan->chan_reg.dma_sfcr &= ~STM32_DMA_SFCR_FTH_MASK;
-		chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_FTH(threshold);
+		if (fifoth != STM32_DMA_FIFO_THRESHOLD_NONE)
+			chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_FTH(fifoth);
 
 		/* Set peripheral address */
 		chan->chan_reg.dma_spar = chan->dma_sconfig.dst_addr;
@@ -758,7 +776,7 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 		/* Set device burst size */
 		src_best_burst = stm32_dma_get_best_burst(buf_len,
 							  src_maxburst,
-							  threshold,
+							  fifoth,
 							  src_addr_width);
 		chan->mem_burst = src_best_burst;
 		src_burst_size = stm32_dma_get_burst(chan, src_best_burst);
@@ -766,7 +784,7 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 			return src_burst_size;
 
 		/* Set memory data size */
-		dst_addr_width = stm32_dma_get_max_width(buf_len, threshold);
+		dst_addr_width = stm32_dma_get_max_width(buf_len, fifoth);
 		chan->mem_width = dst_addr_width;
 		dst_bus_width = stm32_dma_get_width(chan, dst_addr_width);
 		if (dst_bus_width < 0)
@@ -776,7 +794,7 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 		dst_maxburst = STM32_DMA_MAX_BURST;
 		dst_best_burst = stm32_dma_get_best_burst(buf_len,
 							  dst_maxburst,
-							  threshold,
+							  fifoth,
 							  dst_addr_width);
 		chan->mem_burst = dst_best_burst;
 		dst_burst_size = stm32_dma_get_burst(chan, dst_best_burst);
@@ -791,7 +809,8 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 
 		/* Set FIFO threshold */
 		chan->chan_reg.dma_sfcr &= ~STM32_DMA_SFCR_FTH_MASK;
-		chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_FTH(threshold);
+		if (fifoth != STM32_DMA_FIFO_THRESHOLD_NONE)
+			chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_FTH(fifoth);
 
 		/* Set peripheral address */
 		chan->chan_reg.dma_spar = chan->dma_sconfig.src_addr;
@@ -1216,6 +1235,8 @@ static void stm32_dma_set_config(struct stm32_dma_chan *chan,
 	chan->chan_reg.dma_scr |= STM32_DMA_SCR_TEIE | STM32_DMA_SCR_TCIE;
 
 	chan->threshold = STM32_DMA_THRESHOLD_FTR_GET(cfg->features);
+	if (STM32_DMA_DIRECT_MODE_GET(cfg->features))
+		chan->threshold = STM32_DMA_FIFO_THRESHOLD_NONE;
 }
 
 static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index f6a2f42ffc51..55fc7400f717 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -225,7 +225,7 @@ struct tegra_dma {
 	u32				global_pause_count;
 
 	/* Last member of the structure */
-	struct tegra_dma_channel channels[0];
+	struct tegra_dma_channel channels[];
 };
 
 static inline void tdma_write(struct tegra_dma *tdma, u32 reg, u32 val)
@@ -816,6 +816,13 @@ static bool tegra_dma_eoc_interrupt_deasserted(struct tegra_dma_channel *tdc)
 static void tegra_dma_synchronize(struct dma_chan *dc)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
+	int err;
+
+	err = pm_runtime_get_sync(tdc->tdma->dev);
+	if (err < 0) {
+		dev_err(tdc2dev(tdc), "Failed to synchronize DMA: %d\n", err);
+		return;
+	}
 
 	/*
 	 * CPU, which handles interrupt, could be busy in
@@ -825,6 +832,8 @@ static void tegra_dma_synchronize(struct dma_chan *dc)
 	wait_event(tdc->wq, tegra_dma_eoc_interrupt_deasserted(tdc));
 
 	tasklet_kill(&tdc->tasklet);
+
+	pm_runtime_put(tdc->tdma->dev);
 }
 
 static unsigned int tegra_dma_sg_bytes_xferred(struct tegra_dma_channel *tdc,
diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
index f76e06651f80..79618fac119a 100644
--- a/drivers/dma/ti/Kconfig
+++ b/drivers/dma/ti/Kconfig
@@ -36,7 +36,7 @@ config DMA_OMAP
 
 config TI_K3_UDMA
 	bool "Texas Instruments UDMA support"
-	depends on ARCH_K3 || COMPILE_TEST
+	depends on ARCH_K3
 	depends on TI_SCI_PROTOCOL
 	depends on TI_SCI_INTA_IRQCHIP
 	select DMA_ENGINE
@@ -49,7 +49,7 @@ config TI_K3_UDMA
 
 config TI_K3_UDMA_GLUE_LAYER
 	bool "Texas Instruments UDMA Glue layer for non DMAengine users"
-	depends on ARCH_K3 || COMPILE_TEST
+	depends on ARCH_K3
 	depends on TI_K3_UDMA
 	help
 	  Say y here to support the K3 NAVSS DMA glue interface
diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index c4a5c170c1f9..35d81bd857f1 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -211,7 +211,7 @@ struct edma_desc {
 	u32				residue;
 	u32				residue_stat;
 
-	struct edma_pset		pset[0];
+	struct edma_pset		pset[];
 };
 
 struct edma_cc;
diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c
index d7b965049ccb..fb7c8150b0d1 100644
--- a/drivers/dma/ti/k3-psil.c
+++ b/drivers/dma/ti/k3-psil.c
@@ -27,6 +27,7 @@ struct psil_endpoint_config *psil_get_ep_config(u32 thread_id)
 			soc_ep_map = &j721e_ep_map;
 		} else {
 			pr_err("PSIL: No compatible machine found for map\n");
+			mutex_unlock(&ep_map_mutex);
 			return ERR_PTR(-ENOTSUPP);
 		}
 		pr_debug("%s: Using map for %s\n", __func__, soc_ep_map->name);
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index a9c0251adf1a..0a041747fb21 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -170,7 +170,7 @@ struct udma_desc {
 	void *metadata; /* pointer to provided metadata buffer (EPIP, PSdata) */
 
 	unsigned int hwdesc_count;
-	struct udma_hwdesc hwdesc[0];
+	struct udma_hwdesc hwdesc[];
 };
 
 enum udma_chan_state {
@@ -3187,7 +3187,7 @@ static struct udma_match_data am654_main_data = {
 
 static struct udma_match_data am654_mcu_data = {
 	.psil_base = 0x6000,
-	.enable_memcpy_support = true, /* TEST: DMA domains */
+	.enable_memcpy_support = false,
 	.statictr_z_mask = GENMASK(11, 0),
 	.rchan_oes_offset = 0x2000,
 	.tpl_levels = 2,
diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c
index 39382694fdfc..68e48bf54d78 100644
--- a/drivers/dma/timb_dma.c
+++ b/drivers/dma/timb_dma.c
@@ -88,7 +88,7 @@ struct timb_dma {
 	struct dma_device	dma;
 	void __iomem		*membase;
 	struct tasklet_struct	tasklet;
-	struct timb_dma_chan	channels[0];
+	struct timb_dma_chan	channels[];
 };
 
 static struct device *chan2dev(struct dma_chan *chan)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index aecd5a35a296..5429497d3560 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1230,16 +1230,16 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
 		return ret;
 
 	spin_lock_irqsave(&chan->lock, flags);
-
-	desc = list_last_entry(&chan->active_list,
-			       struct xilinx_dma_tx_descriptor, node);
-	/*
-	 * VDMA and simple mode do not support residue reporting, so the
-	 * residue field will always be 0.
-	 */
-	if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
-		residue = xilinx_dma_get_residue(chan, desc);
-
+	if (!list_empty(&chan->active_list)) {
+		desc = list_last_entry(&chan->active_list,
+				       struct xilinx_dma_tx_descriptor, node);
+		/*
+		 * VDMA and simple mode do not support residue reporting, so the
+		 * residue field will always be 0.
+		 */
+		if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
+			residue = xilinx_dma_get_residue(chan, desc);
+	}
 	spin_unlock_irqrestore(&chan->lock, flags);
 
 	dma_set_residue(txstate, residue);
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index f91f3bc1e0b2..6bdc5bb8c8bc 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -4,9 +4,6 @@
 
 static struct edac_pci_ctl_info *pci_ctl;
 
-static int report_gart_errors;
-module_param(report_gart_errors, int, 0644);
-
 /*
  * Set by command line parameter. If BIOS has enabled the ECC, this override is
  * cleared to prevent re-enabling the hardware by this driver.
@@ -3681,9 +3678,6 @@ static int __init amd64_edac_init(void)
 	}
 
 	/* register stuff with EDAC MCE */
-	if (report_gart_errors)
-		amd_report_gart_errors(true);
-
 	if (boot_cpu_data.x86 >= 0x17)
 		amd_register_ecc_decoder(decode_umc_error);
 	else
@@ -3718,8 +3712,6 @@ static void __exit amd64_edac_exit(void)
 		edac_pci_release_generic_ctl(pci_ctl);
 
 	/* unregister from EDAC MCE */
-	amd_report_gart_errors(false);
-
 	if (boot_cpu_data.x86 >= 0x17)
 		amd_unregister_ecc_decoder(decode_umc_error);
 	else
diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c
index 93c82bc17493..169353710982 100644
--- a/drivers/edac/amd8131_edac.c
+++ b/drivers/edac/amd8131_edac.c
@@ -44,14 +44,6 @@ static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32)
 			" PCI Access Write Error at 0x%x\n", reg);
 }
 
-static char * const bridge_str[] = {
-	[NORTH_A] = "NORTH A",
-	[NORTH_B] = "NORTH B",
-	[SOUTH_A] = "SOUTH A",
-	[SOUTH_B] = "SOUTH B",
-	[NO_BRIDGE] = "NO BRIDGE",
-};
-
 /* Support up to two AMD8131 chipsets on a platform */
 static struct amd8131_dev_info amd8131_devices[] = {
 	{
diff --git a/drivers/edac/armada_xp_edac.c b/drivers/edac/armada_xp_edac.c
index a7502ebe9bdc..e3e757513d1b 100644
--- a/drivers/edac/armada_xp_edac.c
+++ b/drivers/edac/armada_xp_edac.c
@@ -78,7 +78,7 @@ struct axp_mc_drvdata {
 	char msg[128];
 };
 
-/* derived from "DRAM Address Multiplexing" in the ARAMDA XP Functional Spec */
+/* derived from "DRAM Address Multiplexing" in the ARMADA XP Functional Spec */
 static uint32_t axp_mc_calc_address(struct axp_mc_drvdata *drvdata,
 				    uint8_t cs, uint8_t bank, uint16_t row,
 				    uint16_t col)
@@ -160,12 +160,12 @@ static void axp_mc_check(struct mem_ctl_info *mci)
 		if (cnt_sbe)
 			cnt_sbe--;
 		else
-			dev_warn(mci->pdev, "inconsistent SBE count detected");
+			dev_warn(mci->pdev, "inconsistent SBE count detected\n");
 	} else {
 		if (cnt_dbe)
 			cnt_dbe--;
 		else
-			dev_warn(mci->pdev, "inconsistent DBE count detected");
+			dev_warn(mci->pdev, "inconsistent DBE count detected\n");
 	}
 
 	/* report earlier errors */
@@ -304,7 +304,7 @@ static int axp_mc_probe(struct platform_device *pdev)
 
 	config = readl(base + SDRAM_CONFIG_REG);
 	if (!(config & SDRAM_CONFIG_ECC_MASK)) {
-		dev_warn(&pdev->dev, "SDRAM ECC is not enabled");
+		dev_warn(&pdev->dev, "SDRAM ECC is not enabled\n");
 		return -EINVAL;
 	}
 
@@ -532,9 +532,9 @@ static int aurora_l2_probe(struct platform_device *pdev)
 
 	l2x0_aux_ctrl = readl(base + L2X0_AUX_CTRL);
 	if (!(l2x0_aux_ctrl & AURORA_ACR_PARITY_EN))
-		dev_warn(&pdev->dev, "tag parity is not enabled");
+		dev_warn(&pdev->dev, "tag parity is not enabled\n");
 	if (!(l2x0_aux_ctrl & AURORA_ACR_ECC_EN))
-		dev_warn(&pdev->dev, "data ECC is not enabled");
+		dev_warn(&pdev->dev, "data ECC is not enabled\n");
 
 	dci = edac_device_alloc_ctl_info(sizeof(*drvdata),
 					 "cpu", 1, "L", 1, 2, NULL, 0, 0);
@@ -618,7 +618,7 @@ static int __init armada_xp_edac_init(void)
 
 	res = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
 	if (res)
-		pr_warn("Aramda XP EDAC drivers fail to register\n");
+		pr_warn("Armada XP EDAC drivers fail to register\n");
 
 	return 0;
 }
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 75ede27bdf6a..5813e931f2f0 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -43,8 +43,6 @@
 int edac_op_state = EDAC_OPSTATE_INVAL;
 EXPORT_SYMBOL_GPL(edac_op_state);
 
-static int edac_report = EDAC_REPORTING_ENABLED;
-
 /* lock to memory controller's control array */
 static DEFINE_MUTEX(mem_ctls_mutex);
 static LIST_HEAD(mc_devices);
@@ -60,65 +58,6 @@ static struct mem_ctl_info *error_desc_to_mci(struct edac_raw_error_desc *e)
 	return container_of(e, struct mem_ctl_info, error_desc);
 }
 
-int edac_get_report_status(void)
-{
-	return edac_report;
-}
-EXPORT_SYMBOL_GPL(edac_get_report_status);
-
-void edac_set_report_status(int new)
-{
-	if (new == EDAC_REPORTING_ENABLED ||
-	    new == EDAC_REPORTING_DISABLED ||
-	    new == EDAC_REPORTING_FORCE)
-		edac_report = new;
-}
-EXPORT_SYMBOL_GPL(edac_set_report_status);
-
-static int edac_report_set(const char *str, const struct kernel_param *kp)
-{
-	if (!str)
-		return -EINVAL;
-
-	if (!strncmp(str, "on", 2))
-		edac_report = EDAC_REPORTING_ENABLED;
-	else if (!strncmp(str, "off", 3))
-		edac_report = EDAC_REPORTING_DISABLED;
-	else if (!strncmp(str, "force", 5))
-		edac_report = EDAC_REPORTING_FORCE;
-
-	return 0;
-}
-
-static int edac_report_get(char *buffer, const struct kernel_param *kp)
-{
-	int ret = 0;
-
-	switch (edac_report) {
-	case EDAC_REPORTING_ENABLED:
-		ret = sprintf(buffer, "on");
-		break;
-	case EDAC_REPORTING_DISABLED:
-		ret = sprintf(buffer, "off");
-		break;
-	case EDAC_REPORTING_FORCE:
-		ret = sprintf(buffer, "force");
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-static const struct kernel_param_ops edac_report_ops = {
-	.set = edac_report_set,
-	.get = edac_report_get,
-};
-
-module_param_cb(edac_report, &edac_report_ops, &edac_report, 0644);
-
 unsigned int edac_dimm_info_location(struct dimm_info *dimm, char *buf,
 				     unsigned int len)
 {
diff --git a/drivers/edac/i10nm_base.c b/drivers/edac/i10nm_base.c
index df08de963d10..a6bc54b02de4 100644
--- a/drivers/edac/i10nm_base.c
+++ b/drivers/edac/i10nm_base.c
@@ -122,10 +122,22 @@ static int i10nm_get_all_munits(void)
 	return 0;
 }
 
+static struct res_config i10nm_cfg0 = {
+	.type			= I10NM,
+	.decs_did		= 0x3452,
+	.busno_cfg_offset	= 0xcc,
+};
+
+static struct res_config i10nm_cfg1 = {
+	.type			= I10NM,
+	.decs_did		= 0x3452,
+	.busno_cfg_offset	= 0xd0,
+};
+
 static const struct x86_cpu_id i10nm_cpuids[] = {
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	NULL),
-	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		NULL),
-	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,		NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	&i10nm_cfg0),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		&i10nm_cfg0),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,		&i10nm_cfg1),
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids);
@@ -234,6 +246,7 @@ static int __init i10nm_init(void)
 {
 	u8 mc = 0, src_id = 0, node_id = 0;
 	const struct x86_cpu_id *id;
+	struct res_config *cfg;
 	const char *owner;
 	struct skx_dev *d;
 	int rc, i, off[3] = {0xd0, 0xc8, 0xcc};
@@ -249,11 +262,17 @@ static int __init i10nm_init(void)
 	if (!id)
 		return -ENODEV;
 
+	cfg = (struct res_config *)id->driver_data;
+
+	/* Newer steppings have different offset for ATOM_TREMONT_D/ICELAKE_X */
+	if (boot_cpu_data.x86_stepping >= 4)
+		cfg->busno_cfg_offset = 0xd0;
+
 	rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm);
 	if (rc)
 		return rc;
 
-	rc = skx_get_all_bus_mappings(0x3452, 0xcc, I10NM, &i10nm_edac_list);
+	rc = skx_get_all_bus_mappings(cfg, &i10nm_edac_list);
 	if (rc < 0)
 		goto fail;
 	if (rc == 0) {
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index b3135b208f9a..5860ca41185c 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1815,7 +1815,7 @@ static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val,
 	struct mem_ctl_info *mci;
 
 	i7_dev = get_i7core_dev(mce->socketid);
-	if (!i7_dev)
+	if (!i7_dev || (mce->kflags & MCE_HANDLED_CEC))
 		return NOTIFY_DONE;
 
 	mci = i7_dev->mci;
@@ -1834,7 +1834,8 @@ static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val,
 	i7core_check_error(mci, mce);
 
 	/* Advise mcelog that the errors were handled */
-	return NOTIFY_STOP;
+	mce->kflags |= MCE_HANDLED_EDAC;
+	return NOTIFY_OK;
 }
 
 static struct notifier_block i7_mce_dec = {
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index 8874b7722b2f..2b5401db56ad 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -10,15 +10,8 @@ static struct amd_decoder_ops fam_ops;
 
 static u8 xec_mask	 = 0xf;
 
-static bool report_gart_errors;
 static void (*decode_dram_ecc)(int node_id, struct mce *m);
 
-void amd_report_gart_errors(bool v)
-{
-	report_gart_errors = v;
-}
-EXPORT_SYMBOL_GPL(amd_report_gart_errors);
-
 void amd_register_ecc_decoder(void (*f)(int, struct mce *))
 {
 	decode_dram_ecc = f;
@@ -1030,20 +1023,6 @@ static inline void amd_decode_err_code(u16 ec)
 	pr_cont("\n");
 }
 
-/*
- * Filter out unwanted MCE signatures here.
- */
-static bool ignore_mce(struct mce *m)
-{
-	/*
-	 * NB GART TLB error reporting is disabled by default.
-	 */
-	if (m->bank == 4 && XEC(m->status, 0x1f) == 0x5 && !report_gart_errors)
-		return true;
-
-	return false;
-}
-
 static const char *decode_error_status(struct mce *m)
 {
 	if (m->status & MCI_STATUS_UC) {
@@ -1067,8 +1046,8 @@ amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
 	unsigned int fam = x86_family(m->cpuid);
 	int ecc;
 
-	if (ignore_mce(m))
-		return NOTIFY_STOP;
+	if (m->kflags & MCE_HANDLED_CEC)
+		return NOTIFY_DONE;
 
 	pr_emerg(HW_ERR "%s\n", decode_error_status(m));
 
@@ -1170,7 +1149,8 @@ amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
  err_code:
 	amd_decode_err_code(m->status & 0xffff);
 
-	return NOTIFY_STOP;
+	m->kflags |= MCE_HANDLED_EDAC;
+	return NOTIFY_OK;
 }
 
 static struct notifier_block amd_mce_dec_nb = {
diff --git a/drivers/edac/mce_amd.h b/drivers/edac/mce_amd.h
index 4e9c5e596c6c..4811b18d9606 100644
--- a/drivers/edac/mce_amd.h
+++ b/drivers/edac/mce_amd.h
@@ -7,7 +7,6 @@
 #include <asm/mce.h>
 
 #define EC(x)				((x) & 0xffff)
-#define XEC(x, mask)			(((x) >> 16) & mask)
 
 #define LOW_SYNDROME(x)			(((x) >> 15) & 0xff)
 #define HIGH_SYNDROME(x)		(((x) >> 24) & 0xff)
@@ -77,7 +76,6 @@ struct amd_decoder_ops {
 	bool (*mc2_mce)(u16, u8);
 };
 
-void amd_report_gart_errors(bool);
 void amd_register_ecc_decoder(void (*f)(int, struct mce *));
 void amd_unregister_ecc_decoder(void (*f)(int, struct mce *));
 
diff --git a/drivers/edac/pnd2_edac.c b/drivers/edac/pnd2_edac.c
index bc47328eb485..c1f2e6deb021 100644
--- a/drivers/edac/pnd2_edac.c
+++ b/drivers/edac/pnd2_edac.c
@@ -1396,11 +1396,8 @@ static int pnd2_mce_check_error(struct notifier_block *nb, unsigned long val, vo
 	struct dram_addr daddr;
 	char *type;
 
-	if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
-		return NOTIFY_DONE;
-
 	mci = pnd2_mci;
-	if (!mci)
+	if (!mci || (mce->kflags & MCE_HANDLED_CEC))
 		return NOTIFY_DONE;
 
 	/*
@@ -1429,7 +1426,8 @@ static int pnd2_mce_check_error(struct notifier_block *nb, unsigned long val, vo
 	pnd2_mce_output_error(mci, mce, &daddr);
 
 	/* Advice mcelog that the error were handled */
-	return NOTIFY_STOP;
+	mce->kflags |= MCE_HANDLED_EDAC;
+	return NOTIFY_OK;
 }
 
 static struct notifier_block pnd2_mce_dec = {
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 7d51c82be62b..d414698ca324 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -3134,7 +3134,7 @@ static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
 	struct mem_ctl_info *mci;
 	char *type;
 
-	if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
+	if (mce->kflags & MCE_HANDLED_CEC)
 		return NOTIFY_DONE;
 
 	/*
@@ -3183,7 +3183,8 @@ static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
 	sbridge_mce_output_error(mci, mce);
 
 	/* Advice mcelog that the error were handled */
-	return NOTIFY_STOP;
+	mce->kflags |= MCE_HANDLED_EDAC;
+	return NOTIFY_OK;
 }
 
 static struct notifier_block sbridge_mce_dec = {
@@ -3523,8 +3524,6 @@ static int __init sbridge_init(void)
 
 	if (rc >= 0) {
 		mce_register_decode_chain(&sbridge_mce_dec);
-		if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
-			sbridge_printk(KERN_WARNING, "Loading driver, error reporting disabled.\n");
 		return 0;
 	}
 
diff --git a/drivers/edac/skx_base.c b/drivers/edac/skx_base.c
index 46a3a3440f5e..94c942fd06c1 100644
--- a/drivers/edac/skx_base.c
+++ b/drivers/edac/skx_base.c
@@ -157,8 +157,14 @@ static int get_all_munits(const struct munit *m)
 	return -ENODEV;
 }
 
+static struct res_config skx_cfg = {
+	.type			= SKX,
+	.decs_did		= 0x2016,
+	.busno_cfg_offset	= 0xcc,
+};
+
 static const struct x86_cpu_id skx_cpuids[] = {
-	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,	&skx_cfg),
 	{ }
 };
 MODULE_DEVICE_TABLE(x86cpu, skx_cpuids);
@@ -641,6 +647,7 @@ static inline void teardown_skx_debug(void) {}
 static int __init skx_init(void)
 {
 	const struct x86_cpu_id *id;
+	struct res_config *cfg;
 	const struct munit *m;
 	const char *owner;
 	int rc = 0, i, off[3] = {0xd0, 0xd4, 0xd8};
@@ -657,11 +664,13 @@ static int __init skx_init(void)
 	if (!id)
 		return -ENODEV;
 
+	cfg = (struct res_config *)id->driver_data;
+
 	rc = skx_get_hi_lo(0x2034, off, &skx_tolm, &skx_tohm);
 	if (rc)
 		return rc;
 
-	rc = skx_get_all_bus_mappings(0x2016, 0xcc, SKX, &skx_edac_list);
+	rc = skx_get_all_bus_mappings(cfg, &skx_edac_list);
 	if (rc < 0)
 		goto fail;
 	if (rc == 0) {
diff --git a/drivers/edac/skx_common.c b/drivers/edac/skx_common.c
index 99bbaf629b8d..e68764ae306b 100644
--- a/drivers/edac/skx_common.c
+++ b/drivers/edac/skx_common.c
@@ -197,12 +197,11 @@ static int get_width(u32 mtr)
 }
 
 /*
- * We use the per-socket device @did to count how many sockets are present,
+ * We use the per-socket device @cfg->did to count how many sockets are present,
  * and to detemine which PCI buses are associated with each socket. Allocate
  * and build the full list of all the skx_dev structures that we need here.
  */
-int skx_get_all_bus_mappings(unsigned int did, int off, enum type type,
-			     struct list_head **list)
+int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list)
 {
 	struct pci_dev *pdev, *prev;
 	struct skx_dev *d;
@@ -211,7 +210,7 @@ int skx_get_all_bus_mappings(unsigned int did, int off, enum type type,
 
 	prev = NULL;
 	for (;;) {
-		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, did, prev);
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, cfg->decs_did, prev);
 		if (!pdev)
 			break;
 		ndev++;
@@ -221,7 +220,7 @@ int skx_get_all_bus_mappings(unsigned int did, int off, enum type type,
 			return -ENOMEM;
 		}
 
-		if (pci_read_config_dword(pdev, off, &reg)) {
+		if (pci_read_config_dword(pdev, cfg->busno_cfg_offset, &reg)) {
 			kfree(d);
 			pci_dev_put(pdev);
 			skx_printk(KERN_ERR, "Failed to read bus idx\n");
@@ -230,7 +229,7 @@ int skx_get_all_bus_mappings(unsigned int did, int off, enum type type,
 
 		d->bus[0] = GET_BITFIELD(reg, 0, 7);
 		d->bus[1] = GET_BITFIELD(reg, 8, 15);
-		if (type == SKX) {
+		if (cfg->type == SKX) {
 			d->seg = pci_domain_nr(pdev->bus);
 			d->bus[2] = GET_BITFIELD(reg, 16, 23);
 			d->bus[3] = GET_BITFIELD(reg, 24, 31);
@@ -574,7 +573,7 @@ int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
 	struct mem_ctl_info *mci;
 	char *type;
 
-	if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
+	if (mce->kflags & MCE_HANDLED_CEC)
 		return NOTIFY_DONE;
 
 	/* ignore unless this is memory related with an address */
@@ -616,6 +615,7 @@ int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
 
 	skx_mce_output_error(mci, mce, &res);
 
+	mce->kflags |= MCE_HANDLED_EDAC;
 	return NOTIFY_DONE;
 }
 
diff --git a/drivers/edac/skx_common.h b/drivers/edac/skx_common.h
index 60d1ea669afd..19dd8c099520 100644
--- a/drivers/edac/skx_common.h
+++ b/drivers/edac/skx_common.h
@@ -112,6 +112,14 @@ struct decoded_addr {
 	int	bank_group;
 };
 
+struct res_config {
+	enum type type;
+	/* Configuration agent device ID */
+	unsigned int decs_did;
+	/* Default bus number configuration register offset */
+	int busno_cfg_offset;
+};
+
 typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci);
 typedef bool (*skx_decode_f)(struct decoded_addr *res);
 typedef void (*skx_show_retry_log_f)(struct decoded_addr *res, char *msg, int len);
@@ -123,8 +131,7 @@ void skx_set_decode(skx_decode_f decode, skx_show_retry_log_f show_retry_log);
 int skx_get_src_id(struct skx_dev *d, int off, u8 *id);
 int skx_get_node_id(struct skx_dev *d, u8 *id);
 
-int skx_get_all_bus_mappings(unsigned int did, int off, enum type,
-			     struct list_head **list);
+int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list);
 
 int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm);
 
diff --git a/drivers/edac/thunderx_edac.c b/drivers/edac/thunderx_edac.c
index 34be60fe6892..4af9744cc6d0 100644
--- a/drivers/edac/thunderx_edac.c
+++ b/drivers/edac/thunderx_edac.c
@@ -1278,7 +1278,7 @@ OCX_DEBUGFS_ATTR(lne23_badcnt, OCX_LNE_BAD_CNT(23));
 
 OCX_DEBUGFS_ATTR(com_int, OCX_COM_INT_W1S);
 
-struct debugfs_entry *ocx_dfs_ents[] = {
+static struct debugfs_entry *ocx_dfs_ents[] = {
 	&debugfs_tlk0_ecc_ctl,
 	&debugfs_tlk1_ecc_ctl,
 	&debugfs_tlk2_ecc_ctl,
@@ -1919,19 +1919,19 @@ static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id)
 
 L2C_DEBUGFS_ATTR(tad_int, L2C_TAD_INT_W1S);
 
-struct debugfs_entry *l2c_tad_dfs_ents[] = {
+static struct debugfs_entry *l2c_tad_dfs_ents[] = {
 	&debugfs_tad_int,
 };
 
 L2C_DEBUGFS_ATTR(cbc_int, L2C_CBC_INT_W1S);
 
-struct debugfs_entry *l2c_cbc_dfs_ents[] = {
+static struct debugfs_entry *l2c_cbc_dfs_ents[] = {
 	&debugfs_cbc_int,
 };
 
 L2C_DEBUGFS_ATTR(mci_int, L2C_MCI_INT_W1S);
 
-struct debugfs_entry *l2c_mci_dfs_ents[] = {
+static struct debugfs_entry *l2c_mci_dfs_ents[] = {
 	&debugfs_mci_int,
 };
 
diff --git a/drivers/edac/xgene_edac.c b/drivers/edac/xgene_edac.c
index e4a1032ba0b5..1d2c27a00a4a 100644
--- a/drivers/edac/xgene_edac.c
+++ b/drivers/edac/xgene_edac.c
@@ -1349,7 +1349,6 @@ static int xgene_edac_l3_remove(struct xgene_edac_dev_ctx *l3)
 #define WORD_ALIGNED_ERR_MASK		BIT(28)
 #define PAGE_ACCESS_ERR_MASK		BIT(27)
 #define WRITE_ACCESS_MASK		BIT(26)
-#define RBERRADDR_RD(src)		((src) & 0x03FFFFFF)
 
 static const char * const soc_mem_err_v1[] = {
 	"10GbE0",
@@ -1483,13 +1482,11 @@ static void xgene_edac_rb_report(struct edac_device_ctl_info *edac_dev)
 		return;
 	if (reg & STICKYERR_MASK) {
 		bool write;
-		u32 address;
 
 		dev_err(edac_dev->dev, "IOB bus access error(s)\n");
 		if (regmap_read(ctx->edac->rb_map, RBEIR, &reg))
 			return;
 		write = reg & WRITE_ACCESS_MASK ? 1 : 0;
-		address = RBERRADDR_RD(reg);
 		if (reg & AGENT_OFFLINE_ERR_MASK)
 			dev_err(edac_dev->dev,
 				"IOB bus %s access to offline agent error\n",
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 2dfbfec572f9..0a6438cbb3f3 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -900,7 +900,7 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
 			     struct notifier_block *nb)
 {
 	unsigned long flags;
-	int ret, idx = -EINVAL;
+	int ret, idx;
 
 	if (!edev || !nb)
 		return -EINVAL;
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index 6e291d8f3a27..e6fc20dff687 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -117,7 +117,7 @@ struct inbound_transaction_resource {
 struct descriptor_resource {
 	struct client_resource resource;
 	struct fw_descriptor descriptor;
-	u32 data[0];
+	u32 data[];
 };
 
 struct iso_resource {
diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c
index 404a035f104d..439d918bbaaf 100644
--- a/drivers/firewire/core-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -620,7 +620,7 @@ struct fw_request {
 	u32 request_header[4];
 	int ack;
 	u32 length;
-	u32 data[0];
+	u32 data[];
 };
 
 static void free_response_callback(struct fw_packet *packet,
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index 4b0e4ee655a1..71d5f16f311c 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -191,7 +191,7 @@ struct fw_node {
 	/* Upper layer specific data. */
 	void *data;
 
-	struct fw_node *ports[0];
+	struct fw_node *ports[];
 };
 
 static inline struct fw_node *fw_node_get(struct fw_node *node)
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 715e491dfbc3..28785642a5c5 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -490,7 +490,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 {
 	struct fwnet_device *dev;
 	int status;
-	__be64 guid;
 
 	switch (ether_type) {
 	case ETH_P_ARP:
@@ -512,7 +511,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 	 * Parse the encapsulation header. This actually does the job of
 	 * converting to an ethernet-like pseudo frame header.
 	 */
-	guid = cpu_to_be64(dev->card->guid);
 	if (dev_hard_header(skb, net, ether_type,
 			   is_broadcast ? net->broadcast : net->dev_addr,
 			   NULL, skb->len) >= 0) {
diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c
index 6ca2f5ab6c57..5fd6a60b6741 100644
--- a/drivers/firewire/nosy.c
+++ b/drivers/firewire/nosy.c
@@ -52,7 +52,7 @@ struct pcl {
 
 struct packet {
 	unsigned int length;
-	char data[0];
+	char data[];
 };
 
 struct packet_buffer {
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 33269316f111..54fdc39cd0bc 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -111,7 +111,7 @@ struct descriptor_buffer {
 	dma_addr_t buffer_bus;
 	size_t buffer_size;
 	size_t used;
-	struct descriptor buffer[0];
+	struct descriptor buffer[];
 };
 
 struct context {
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 6694d0d908d6..11b238f81923 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -2,6 +2,8 @@
 obj-y	= scmi-bus.o scmi-driver.o scmi-protocols.o scmi-transport.o
 scmi-bus-y = bus.o
 scmi-driver-y = driver.o
-scmi-transport-y = mailbox.o shmem.o
+scmi-transport-y = shmem.o
+scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
+scmi-transport-$(CONFIG_HAVE_ARM_SMCCC) += smc.o
 scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
 obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c
index f804e8af6521..ce7d9203e41b 100644
--- a/drivers/firmware/arm_scmi/base.c
+++ b/drivers/firmware/arm_scmi/base.c
@@ -14,6 +14,13 @@ enum scmi_base_protocol_cmd {
 	BASE_DISCOVER_LIST_PROTOCOLS = 0x6,
 	BASE_DISCOVER_AGENT = 0x7,
 	BASE_NOTIFY_ERRORS = 0x8,
+	BASE_SET_DEVICE_PERMISSIONS = 0x9,
+	BASE_SET_PROTOCOL_PERMISSIONS = 0xa,
+	BASE_RESET_AGENT_CONFIGURATION = 0xb,
+};
+
+enum scmi_base_protocol_notify {
+	BASE_ERROR_EVENT = 0x0,
 };
 
 struct scmi_msg_resp_base_attributes {
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 5ac06469b01c..31fe5a22a011 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -178,6 +178,8 @@ struct scmi_chan_info {
  * @send_message: Callback to send a message
  * @mark_txdone: Callback to mark tx as done
  * @fetch_response: Callback to fetch response
+ * @fetch_notification: Callback to fetch notification
+ * @clear_channel: Callback to clear a channel
  * @poll_done: Callback to poll transfer status
  */
 struct scmi_transport_ops {
@@ -190,6 +192,9 @@ struct scmi_transport_ops {
 	void (*mark_txdone)(struct scmi_chan_info *cinfo, int ret);
 	void (*fetch_response)(struct scmi_chan_info *cinfo,
 			       struct scmi_xfer *xfer);
+	void (*fetch_notification)(struct scmi_chan_info *cinfo,
+				   size_t max_len, struct scmi_xfer *xfer);
+	void (*clear_channel)(struct scmi_chan_info *cinfo);
 	bool (*poll_done)(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer);
 };
 
@@ -210,6 +215,9 @@ struct scmi_desc {
 };
 
 extern const struct scmi_desc scmi_mailbox_desc;
+#ifdef CONFIG_HAVE_ARM_SMCCC
+extern const struct scmi_desc scmi_smc_desc;
+#endif
 
 void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr);
 void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
@@ -222,5 +230,8 @@ void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem,
 u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem);
 void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
 			  struct scmi_xfer *xfer);
+void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem,
+			      size_t max_len, struct scmi_xfer *xfer);
+void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem);
 bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
 		     struct scmi_xfer *xfer);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index dbec767222e9..fec308e47b9d 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -76,6 +76,7 @@ struct scmi_xfers_info {
  *	implementation version and (sub-)vendor identification.
  * @handle: Instance of SCMI handle to send to clients
  * @tx_minfo: Universal Transmit Message management info
+ * @rx_minfo: Universal Receive Message management info
  * @tx_idr: IDR object to map protocol id to Tx channel info pointer
  * @rx_idr: IDR object to map protocol id to Rx channel info pointer
  * @protocols_imp: List of protocols implemented, currently maximum of
@@ -89,6 +90,7 @@ struct scmi_info {
 	struct scmi_revision_info version;
 	struct scmi_handle handle;
 	struct scmi_xfers_info tx_minfo;
+	struct scmi_xfers_info rx_minfo;
 	struct idr tx_idr;
 	struct idr rx_idr;
 	u8 *protocols_imp;
@@ -200,37 +202,66 @@ __scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
 	spin_unlock_irqrestore(&minfo->xfer_lock, flags);
 }
 
-/**
- * scmi_rx_callback() - callback for receiving messages
- *
- * @cinfo: SCMI channel info
- * @msg_hdr: Message header
- *
- * Processes one received message to appropriate transfer information and
- * signals completion of the transfer.
- *
- * NOTE: This function will be invoked in IRQ context, hence should be
- * as optimal as possible.
- */
-void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr)
+static void scmi_handle_notification(struct scmi_chan_info *cinfo, u32 msg_hdr)
 {
-	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
-	struct scmi_xfers_info *minfo = &info->tx_minfo;
-	u16 xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
-	u8 msg_type = MSG_XTRACT_TYPE(msg_hdr);
-	struct device *dev = cinfo->dev;
 	struct scmi_xfer *xfer;
+	struct device *dev = cinfo->dev;
+	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+	struct scmi_xfers_info *minfo = &info->rx_minfo;
 
-	if (msg_type == MSG_TYPE_NOTIFICATION)
-		return; /* Notifications not yet supported */
+	xfer = scmi_xfer_get(cinfo->handle, minfo);
+	if (IS_ERR(xfer)) {
+		dev_err(dev, "failed to get free message slot (%ld)\n",
+			PTR_ERR(xfer));
+		info->desc->ops->clear_channel(cinfo);
+		return;
+	}
+
+	unpack_scmi_header(msg_hdr, &xfer->hdr);
+	scmi_dump_header_dbg(dev, &xfer->hdr);
+	info->desc->ops->fetch_notification(cinfo, info->desc->max_msg_size,
+					    xfer);
+
+	trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id,
+			   xfer->hdr.protocol_id, xfer->hdr.seq,
+			   MSG_TYPE_NOTIFICATION);
+
+	__scmi_xfer_put(minfo, xfer);
+
+	info->desc->ops->clear_channel(cinfo);
+}
+
+static void scmi_handle_response(struct scmi_chan_info *cinfo,
+				 u16 xfer_id, u8 msg_type)
+{
+	struct scmi_xfer *xfer;
+	struct device *dev = cinfo->dev;
+	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+	struct scmi_xfers_info *minfo = &info->tx_minfo;
 
 	/* Are we even expecting this? */
 	if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
 		dev_err(dev, "message for %d is not expected!\n", xfer_id);
+		info->desc->ops->clear_channel(cinfo);
 		return;
 	}
 
 	xfer = &minfo->xfer_block[xfer_id];
+	/*
+	 * Even if a response was indeed expected on this slot at this point,
+	 * a buggy platform could wrongly reply feeding us an unexpected
+	 * delayed response we're not prepared to handle: bail-out safely
+	 * blaming firmware.
+	 */
+	if (unlikely(msg_type == MSG_TYPE_DELAYED_RESP && !xfer->async_done)) {
+		dev_err(dev,
+			"Delayed Response for %d not expected! Buggy F/W ?\n",
+			xfer_id);
+		info->desc->ops->clear_channel(cinfo);
+		/* It was unexpected, so nobody will clear the xfer if not us */
+		__scmi_xfer_put(minfo, xfer);
+		return;
+	}
 
 	scmi_dump_header_dbg(dev, &xfer->hdr);
 
@@ -240,10 +271,43 @@ void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr)
 			   xfer->hdr.protocol_id, xfer->hdr.seq,
 			   msg_type);
 
-	if (msg_type == MSG_TYPE_DELAYED_RESP)
+	if (msg_type == MSG_TYPE_DELAYED_RESP) {
+		info->desc->ops->clear_channel(cinfo);
 		complete(xfer->async_done);
-	else
+	} else {
 		complete(&xfer->done);
+	}
+}
+
+/**
+ * scmi_rx_callback() - callback for receiving messages
+ *
+ * @cinfo: SCMI channel info
+ * @msg_hdr: Message header
+ *
+ * Processes one received message to appropriate transfer information and
+ * signals completion of the transfer.
+ *
+ * NOTE: This function will be invoked in IRQ context, hence should be
+ * as optimal as possible.
+ */
+void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr)
+{
+	u16 xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
+	u8 msg_type = MSG_XTRACT_TYPE(msg_hdr);
+
+	switch (msg_type) {
+	case MSG_TYPE_NOTIFICATION:
+		scmi_handle_notification(cinfo, msg_hdr);
+		break;
+	case MSG_TYPE_COMMAND:
+	case MSG_TYPE_DELAYED_RESP:
+		scmi_handle_response(cinfo, xfer_id, msg_type);
+		break;
+	default:
+		WARN_ONCE(1, "received unknown msg_type:%d\n", msg_type);
+		break;
+	}
 }
 
 /**
@@ -525,13 +589,13 @@ int scmi_handle_put(const struct scmi_handle *handle)
 	return 0;
 }
 
-static int scmi_xfer_info_init(struct scmi_info *sinfo)
+static int __scmi_xfer_info_init(struct scmi_info *sinfo,
+				 struct scmi_xfers_info *info)
 {
 	int i;
 	struct scmi_xfer *xfer;
 	struct device *dev = sinfo->dev;
 	const struct scmi_desc *desc = sinfo->desc;
-	struct scmi_xfers_info *info = &sinfo->tx_minfo;
 
 	/* Pre-allocated messages, no more than what hdr.seq can support */
 	if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) {
@@ -566,6 +630,16 @@ static int scmi_xfer_info_init(struct scmi_info *sinfo)
 	return 0;
 }
 
+static int scmi_xfer_info_init(struct scmi_info *sinfo)
+{
+	int ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo);
+
+	if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE))
+		ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo);
+
+	return ret;
+}
+
 static int scmi_chan_setup(struct scmi_info *info, struct device *dev,
 			   int prot_id, bool tx)
 {
@@ -699,10 +773,6 @@ static int scmi_probe(struct platform_device *pdev)
 	info->desc = desc;
 	INIT_LIST_HEAD(&info->node);
 
-	ret = scmi_xfer_info_init(info);
-	if (ret)
-		return ret;
-
 	platform_set_drvdata(pdev, info);
 	idr_init(&info->tx_idr);
 	idr_init(&info->rx_idr);
@@ -715,6 +785,10 @@ static int scmi_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = scmi_xfer_info_init(info);
+	if (ret)
+		return ret;
+
 	ret = scmi_base_protocol_init(handle);
 	if (ret) {
 		dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
@@ -827,6 +901,9 @@ ATTRIBUTE_GROUPS(versions);
 /* Each compatible listed below must have descriptor associated with it */
 static const struct of_device_id scmi_of_match[] = {
 	{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+#ifdef CONFIG_HAVE_ARM_SMCCC
+	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
+#endif
 	{ /* Sentinel */ },
 };
 
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
index 73077bbc4ad9..6998dc86b5ce 100644
--- a/drivers/firmware/arm_scmi/mailbox.c
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -158,6 +158,21 @@ static void mailbox_fetch_response(struct scmi_chan_info *cinfo,
 	shmem_fetch_response(smbox->shmem, xfer);
 }
 
+static void mailbox_fetch_notification(struct scmi_chan_info *cinfo,
+				       size_t max_len, struct scmi_xfer *xfer)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	shmem_fetch_notification(smbox->shmem, max_len, xfer);
+}
+
+static void mailbox_clear_channel(struct scmi_chan_info *cinfo)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	shmem_clear_channel(smbox->shmem);
+}
+
 static bool
 mailbox_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
 {
@@ -173,6 +188,8 @@ static struct scmi_transport_ops scmi_mailbox_ops = {
 	.send_message = mailbox_send_message,
 	.mark_txdone = mailbox_mark_txdone,
 	.fetch_response = mailbox_fetch_response,
+	.fetch_notification = mailbox_fetch_notification,
+	.clear_channel = mailbox_clear_channel,
 	.poll_done = mailbox_poll_done,
 };
 
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 34f3a917dd8d..eadc171e254b 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -27,6 +27,11 @@ enum scmi_performance_protocol_cmd {
 	PERF_DESCRIBE_FASTCHANNEL = 0xb,
 };
 
+enum scmi_performance_protocol_notify {
+	PERFORMANCE_LIMITS_CHANGED = 0x0,
+	PERFORMANCE_LEVEL_CHANGED = 0x1,
+};
+
 struct scmi_opp {
 	u32 perf;
 	u32 power;
diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
index 214886ce84f1..cf7f0312381b 100644
--- a/drivers/firmware/arm_scmi/power.c
+++ b/drivers/firmware/arm_scmi/power.c
@@ -12,6 +12,12 @@ enum scmi_power_protocol_cmd {
 	POWER_STATE_SET = 0x4,
 	POWER_STATE_GET = 0x5,
 	POWER_STATE_NOTIFY = 0x6,
+	POWER_STATE_CHANGE_REQUESTED_NOTIFY = 0x7,
+};
+
+enum scmi_power_protocol_notify {
+	POWER_STATE_CHANGED = 0x0,
+	POWER_STATE_CHANGE_REQUESTED = 0x1,
 };
 
 struct scmi_msg_resp_power_attributes {
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index eba61b9c1f53..db1b1ab303da 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -14,6 +14,10 @@ enum scmi_sensor_protocol_cmd {
 	SENSOR_READING_GET = 0x6,
 };
 
+enum scmi_sensor_protocol_notify {
+	SENSOR_TRIP_POINT_EVENT = 0x0,
+};
+
 struct scmi_msg_resp_sensor_attributes {
 	__le16 num_sensors;
 	u8 max_requests;
diff --git a/drivers/firmware/arm_scmi/shmem.c b/drivers/firmware/arm_scmi/shmem.c
index e1e816e0018c..0e3eaea5d852 100644
--- a/drivers/firmware/arm_scmi/shmem.c
+++ b/drivers/firmware/arm_scmi/shmem.c
@@ -67,6 +67,21 @@ void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
 	memcpy_fromio(xfer->rx.buf, shmem->msg_payload + 4, xfer->rx.len);
 }
 
+void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem,
+			      size_t max_len, struct scmi_xfer *xfer)
+{
+	/* Skip only the length of header in shmem area i.e 4 bytes */
+	xfer->rx.len = min_t(size_t, max_len, ioread32(&shmem->length) - 4);
+
+	/* Take a copy to the rx buffer.. */
+	memcpy_fromio(xfer->rx.buf, shmem->msg_payload, xfer->rx.len);
+}
+
+void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem)
+{
+	iowrite32(SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE, &shmem->channel_status);
+}
+
 bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
 		     struct scmi_xfer *xfer)
 {
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
new file mode 100644
index 000000000000..49bc4b0e8428
--- /dev/null
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message SMC/HVC
+ * Transport driver
+ *
+ * Copyright 2020 NXP
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "common.h"
+
+/**
+ * struct scmi_smc - Structure representing a SCMI smc transport
+ *
+ * @cinfo: SCMI channel info
+ * @shmem: Transmit/Receive shared memory area
+ * @func_id: smc/hvc call function id
+ */
+
+struct scmi_smc {
+	struct scmi_chan_info *cinfo;
+	struct scmi_shared_mem __iomem *shmem;
+	struct mutex shmem_lock;
+	u32 func_id;
+};
+
+static bool smc_chan_available(struct device *dev, int idx)
+{
+	struct device_node *np = of_parse_phandle(dev->of_node, "shmem", 0);
+	if (!np)
+		return false;
+
+	of_node_put(np);
+	return true;
+}
+
+static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
+			  bool tx)
+{
+	struct device *cdev = cinfo->dev;
+	struct scmi_smc *scmi_info;
+	resource_size_t size;
+	struct resource res;
+	struct device_node *np;
+	u32 func_id;
+	int ret;
+
+	if (!tx)
+		return -ENODEV;
+
+	scmi_info = devm_kzalloc(dev, sizeof(*scmi_info), GFP_KERNEL);
+	if (!scmi_info)
+		return -ENOMEM;
+
+	np = of_parse_phandle(cdev->of_node, "shmem", 0);
+	ret = of_address_to_resource(np, 0, &res);
+	of_node_put(np);
+	if (ret) {
+		dev_err(cdev, "failed to get SCMI Tx shared memory\n");
+		return ret;
+	}
+
+	size = resource_size(&res);
+	scmi_info->shmem = devm_ioremap(dev, res.start, size);
+	if (!scmi_info->shmem) {
+		dev_err(dev, "failed to ioremap SCMI Tx shared memory\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "arm,smc-id", &func_id);
+	if (ret < 0)
+		return ret;
+
+	scmi_info->func_id = func_id;
+	scmi_info->cinfo = cinfo;
+	mutex_init(&scmi_info->shmem_lock);
+	cinfo->transport_info = scmi_info;
+
+	return 0;
+}
+
+static int smc_chan_free(int id, void *p, void *data)
+{
+	struct scmi_chan_info *cinfo = p;
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+
+	cinfo->transport_info = NULL;
+	scmi_info->cinfo = NULL;
+
+	scmi_free_channel(cinfo, data, id);
+
+	return 0;
+}
+
+static int smc_send_message(struct scmi_chan_info *cinfo,
+			    struct scmi_xfer *xfer)
+{
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+	struct arm_smccc_res res;
+
+	mutex_lock(&scmi_info->shmem_lock);
+
+	shmem_tx_prepare(scmi_info->shmem, xfer);
+
+	arm_smccc_1_1_invoke(scmi_info->func_id, 0, 0, 0, 0, 0, 0, 0, &res);
+	scmi_rx_callback(scmi_info->cinfo, shmem_read_header(scmi_info->shmem));
+
+	mutex_unlock(&scmi_info->shmem_lock);
+
+	/* Only SMCCC_RET_NOT_SUPPORTED is valid error code */
+	if (res.a0)
+		return -EOPNOTSUPP;
+	return 0;
+}
+
+static void smc_fetch_response(struct scmi_chan_info *cinfo,
+			       struct scmi_xfer *xfer)
+{
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+
+	shmem_fetch_response(scmi_info->shmem, xfer);
+}
+
+static bool
+smc_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
+{
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+
+	return shmem_poll_done(scmi_info->shmem, xfer);
+}
+
+static struct scmi_transport_ops scmi_smc_ops = {
+	.chan_available = smc_chan_available,
+	.chan_setup = smc_chan_setup,
+	.chan_free = smc_chan_free,
+	.send_message = smc_send_message,
+	.fetch_response = smc_fetch_response,
+	.poll_done = smc_poll_done,
+};
+
+const struct scmi_desc scmi_smc_desc = {
+	.ops = &scmi_smc_ops,
+	.max_rx_timeout_ms = 30,
+	.max_msg = 1,
+	.max_msg_size = 128,
+};
diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c
index ff39f64f2aae..86d71b0212b1 100644
--- a/drivers/firmware/dmi-id.c
+++ b/drivers/firmware/dmi-id.c
@@ -42,6 +42,8 @@ DEFINE_DMI_ATTR_WITH_SHOW(bios_vendor,		0444, DMI_BIOS_VENDOR);
 DEFINE_DMI_ATTR_WITH_SHOW(bios_version,		0444, DMI_BIOS_VERSION);
 DEFINE_DMI_ATTR_WITH_SHOW(bios_date,		0444, DMI_BIOS_DATE);
 DEFINE_DMI_ATTR_WITH_SHOW(sys_vendor,		0444, DMI_SYS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_release,		0444, DMI_BIOS_RELEASE);
+DEFINE_DMI_ATTR_WITH_SHOW(ec_firmware_release,	0444, DMI_EC_FIRMWARE_RELEASE);
 DEFINE_DMI_ATTR_WITH_SHOW(product_name,		0444, DMI_PRODUCT_NAME);
 DEFINE_DMI_ATTR_WITH_SHOW(product_version,	0444, DMI_PRODUCT_VERSION);
 DEFINE_DMI_ATTR_WITH_SHOW(product_serial,	0400, DMI_PRODUCT_SERIAL);
@@ -78,6 +80,8 @@ static ssize_t get_modalias(char *buffer, size_t buffer_size)
 		{ "bvn", DMI_BIOS_VENDOR },
 		{ "bvr", DMI_BIOS_VERSION },
 		{ "bd",  DMI_BIOS_DATE },
+		{ "br",  DMI_BIOS_RELEASE },
+		{ "efr", DMI_EC_FIRMWARE_RELEASE },
 		{ "svn", DMI_SYS_VENDOR },
 		{ "pn",  DMI_PRODUCT_NAME },
 		{ "pvr", DMI_PRODUCT_VERSION },
@@ -187,6 +191,8 @@ static void __init dmi_id_init_attr_table(void)
 	ADD_DMI_ATTR(bios_vendor,       DMI_BIOS_VENDOR);
 	ADD_DMI_ATTR(bios_version,      DMI_BIOS_VERSION);
 	ADD_DMI_ATTR(bios_date,         DMI_BIOS_DATE);
+	ADD_DMI_ATTR(bios_release,      DMI_BIOS_RELEASE);
+	ADD_DMI_ATTR(ec_firmware_release, DMI_EC_FIRMWARE_RELEASE);
 	ADD_DMI_ATTR(sys_vendor,        DMI_SYS_VENDOR);
 	ADD_DMI_ATTR(product_name,      DMI_PRODUCT_NAME);
 	ADD_DMI_ATTR(product_version,   DMI_PRODUCT_VERSION);
diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
index b6180023eba7..8b8127fa8955 100644
--- a/drivers/firmware/dmi-sysfs.c
+++ b/drivers/firmware/dmi-sysfs.c
@@ -262,7 +262,7 @@ struct dmi_system_event_log {
 	u8	header_format;
 	u8	type_descriptors_supported_count;
 	u8	per_log_type_descriptor_length;
-	u8	supported_log_type_descriptos[0];
+	u8	supported_log_type_descriptos[];
 } __packed;
 
 #define DMI_SYSFS_SEL_FIELD(_field) \
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index f59163cb7cba..5066d1f1d687 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -186,6 +186,34 @@ static void __init dmi_save_ident(const struct dmi_header *dm, int slot,
 	dmi_ident[slot] = p;
 }
 
+static void __init dmi_save_release(const struct dmi_header *dm, int slot,
+		int index)
+{
+	const u8 *minor, *major;
+	char *s;
+
+	/* If the table doesn't have the field, let's return */
+	if (dmi_ident[slot] || dm->length < index)
+		return;
+
+	minor = (u8 *) dm + index;
+	major = (u8 *) dm + index - 1;
+
+	/* As per the spec, if the system doesn't support this field,
+	 * the value is FF
+	 */
+	if (*major == 0xFF && *minor == 0xFF)
+		return;
+
+	s = dmi_alloc(8);
+	if (!s)
+		return;
+
+	sprintf(s, "%u.%u", *major, *minor);
+
+	dmi_ident[slot] = s;
+}
+
 static void __init dmi_save_uuid(const struct dmi_header *dm, int slot,
 		int index)
 {
@@ -444,6 +472,8 @@ static void __init dmi_decode(const struct dmi_header *dm, void *dummy)
 		dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
 		dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
 		dmi_save_ident(dm, DMI_BIOS_DATE, 8);
+		dmi_save_release(dm, DMI_BIOS_RELEASE, 21);
+		dmi_save_release(dm, DMI_EC_FIRMWARE_RELEASE, 23);
 		break;
 	case 1:		/* System Information */
 		dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
index 613828d3f106..6b38f9e5d203 100644
--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -106,12 +106,12 @@ config EFI_PARAMS_FROM_FDT
 config EFI_RUNTIME_WRAPPERS
 	bool
 
-config EFI_ARMSTUB
+config EFI_GENERIC_STUB
 	bool
 
 config EFI_ARMSTUB_DTB_LOADER
 	bool "Enable the DTB loader"
-	depends on EFI_ARMSTUB
+	depends on EFI_GENERIC_STUB
 	default y
 	help
 	  Select this config option to add support for the dtb= command
@@ -124,6 +124,17 @@ config EFI_ARMSTUB_DTB_LOADER
 	  functionality for bootloaders that do not have such support
 	  this option is necessary.
 
+config EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER
+	bool "Enable the command line initrd loader" if !X86
+	depends on EFI_STUB && (EFI_GENERIC_STUB || X86)
+	default y
+	help
+	  Select this config option to add support for the initrd= command
+	  line parameter, allowing an initrd that resides on the same volume
+	  as the kernel image to be loaded into memory.
+
+	  This method is deprecated.
+
 config EFI_BOOTLOADER_CONTROL
 	tristate "EFI Bootloader Control"
 	depends on EFI_VARS
diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c
index 9e5e62f5f94d..c697e70ca7e7 100644
--- a/drivers/firmware/efi/arm-init.c
+++ b/drivers/firmware/efi/arm-init.c
@@ -54,8 +54,8 @@ static phys_addr_t __init efi_to_phys(unsigned long addr)
 static __initdata unsigned long screen_info_table = EFI_INVALID_TABLE_ADDR;
 
 static const efi_config_table_type_t arch_tables[] __initconst = {
-	{LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID, NULL, &screen_info_table},
-	{NULL_GUID, NULL, NULL}
+	{LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID, &screen_info_table},
+	{}
 };
 
 static void __init init_screen_info(void)
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 911a2bd0f6b7..48d0188936c3 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -502,21 +502,21 @@ void __init efi_mem_reserve(phys_addr_t addr, u64 size)
 }
 
 static const efi_config_table_type_t common_tables[] __initconst = {
-	{ACPI_20_TABLE_GUID, "ACPI 2.0", &efi.acpi20},
-	{ACPI_TABLE_GUID, "ACPI", &efi.acpi},
-	{SMBIOS_TABLE_GUID, "SMBIOS", &efi.smbios},
-	{SMBIOS3_TABLE_GUID, "SMBIOS 3.0", &efi.smbios3},
-	{EFI_SYSTEM_RESOURCE_TABLE_GUID, "ESRT", &efi.esrt},
-	{EFI_MEMORY_ATTRIBUTES_TABLE_GUID, "MEMATTR", &efi_mem_attr_table},
-	{LINUX_EFI_RANDOM_SEED_TABLE_GUID, "RNG", &efi_rng_seed},
-	{LINUX_EFI_TPM_EVENT_LOG_GUID, "TPMEventLog", &efi.tpm_log},
-	{LINUX_EFI_TPM_FINAL_LOG_GUID, "TPMFinalLog", &efi.tpm_final_log},
-	{LINUX_EFI_MEMRESERVE_TABLE_GUID, "MEMRESERVE", &mem_reserve},
-	{EFI_RT_PROPERTIES_TABLE_GUID, "RTPROP", &rt_prop},
+	{ACPI_20_TABLE_GUID,			&efi.acpi20,		"ACPI 2.0"	},
+	{ACPI_TABLE_GUID,			&efi.acpi,		"ACPI"		},
+	{SMBIOS_TABLE_GUID,			&efi.smbios,		"SMBIOS"	},
+	{SMBIOS3_TABLE_GUID,			&efi.smbios3,		"SMBIOS 3.0"	},
+	{EFI_SYSTEM_RESOURCE_TABLE_GUID,	&efi.esrt,		"ESRT"		},
+	{EFI_MEMORY_ATTRIBUTES_TABLE_GUID,	&efi_mem_attr_table,	"MEMATTR"	},
+	{LINUX_EFI_RANDOM_SEED_TABLE_GUID,	&efi_rng_seed,		"RNG"		},
+	{LINUX_EFI_TPM_EVENT_LOG_GUID,		&efi.tpm_log,		"TPMEventLog"	},
+	{LINUX_EFI_TPM_FINAL_LOG_GUID,		&efi.tpm_final_log,	"TPMFinalLog"	},
+	{LINUX_EFI_MEMRESERVE_TABLE_GUID,	&mem_reserve,		"MEMRESERVE"	},
+	{EFI_RT_PROPERTIES_TABLE_GUID,		&rt_prop,		"RTPROP"	},
 #ifdef CONFIG_EFI_RCI2_TABLE
-	{DELLEMC_EFI_RCI2_TABLE_GUID, NULL, &rci2_table_phys},
+	{DELLEMC_EFI_RCI2_TABLE_GUID,		&rci2_table_phys			},
 #endif
-	{NULL_GUID, NULL, NULL},
+	{},
 };
 
 static __init int match_config_table(const efi_guid_t *guid,
@@ -525,15 +525,13 @@ static __init int match_config_table(const efi_guid_t *guid,
 {
 	int i;
 
-	if (table_types) {
-		for (i = 0; efi_guidcmp(table_types[i].guid, NULL_GUID); i++) {
-			if (!efi_guidcmp(*guid, table_types[i].guid)) {
-				*(table_types[i].ptr) = table;
-				if (table_types[i].name)
-					pr_cont(" %s=0x%lx ",
-						table_types[i].name, table);
-				return 1;
-			}
+	for (i = 0; efi_guidcmp(table_types[i].guid, NULL_GUID); i++) {
+		if (!efi_guidcmp(*guid, table_types[i].guid)) {
+			*(table_types[i].ptr) = table;
+			if (table_types[i].name[0])
+				pr_cont("%s=0x%lx ",
+					table_types[i].name, table);
+			return 1;
 		}
 	}
 
@@ -570,7 +568,7 @@ int __init efi_config_parse_tables(const efi_config_table_t *config_tables,
 			table = tbl32[i].table;
 		}
 
-		if (!match_config_table(guid, table, common_tables))
+		if (!match_config_table(guid, table, common_tables) && arch_tables)
 			match_config_table(guid, table, arch_tables);
 	}
 	pr_cont("\n");
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index 094eabdecfe6..4e0a6fc781f2 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -23,7 +23,7 @@ cflags-$(CONFIG_ARM)		:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
 				   -fno-builtin -fpic \
 				   $(call cc-option,-mno-single-pic-base)
 
-cflags-$(CONFIG_EFI_ARMSTUB)	+= -I$(srctree)/scripts/dtc/libfdt
+cflags-$(CONFIG_EFI_GENERIC_STUB) += -I$(srctree)/scripts/dtc/libfdt
 
 KBUILD_CFLAGS			:= $(cflags-y) -DDISABLE_BRANCH_PROFILING \
 				   -include $(srctree)/drivers/firmware/efi/libstub/hidden.h \
@@ -33,7 +33,9 @@ KBUILD_CFLAGS			:= $(cflags-y) -DDISABLE_BRANCH_PROFILING \
 				   -D__DISABLE_EXPORTS
 
 GCOV_PROFILE			:= n
+# Sanitizer runtimes are unavailable and cannot be linked here.
 KASAN_SANITIZE			:= n
+KCSAN_SANITIZE			:= n
 UBSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
 
@@ -42,16 +44,17 @@ KCOV_INSTRUMENT			:= n
 
 lib-y				:= efi-stub-helper.o gop.o secureboot.o tpm.o \
 				   file.o mem.o random.o randomalloc.o pci.o \
-				   skip_spaces.o lib-cmdline.o lib-ctype.o
+				   skip_spaces.o lib-cmdline.o lib-ctype.o \
+				   alignedmem.o relocate.o
 
 # include the stub's generic dependencies from lib/ when building for ARM/arm64
-arm-deps-y := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c fdt_empty_tree.c fdt_sw.c
+efi-deps-y := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c fdt_empty_tree.c fdt_sw.c
 
 $(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
 	$(call if_changed_rule,cc_o_c)
 
-lib-$(CONFIG_EFI_ARMSTUB)	+= arm-stub.o fdt.o string.o \
-				   $(patsubst %.c,lib-%.o,$(arm-deps-y))
+lib-$(CONFIG_EFI_GENERIC_STUB)	+= efi-stub.o fdt.o string.o \
+				   $(patsubst %.c,lib-%.o,$(efi-deps-y))
 
 lib-$(CONFIG_ARM)		+= arm32-stub.o
 lib-$(CONFIG_ARM64)		+= arm64-stub.o
@@ -59,6 +62,25 @@ lib-$(CONFIG_X86)		+= x86-stub.o
 CFLAGS_arm32-stub.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 CFLAGS_arm64-stub.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 
+#
+# For x86, bootloaders like systemd-boot or grub-efi do not zero-initialize the
+# .bss section, so the .bss section of the EFI stub needs to be included in the
+# .data section of the compressed kernel to ensure initialization. Rename the
+# .bss section here so it's easy to pick out in the linker script.
+#
+STUBCOPY_FLAGS-$(CONFIG_X86)	+= --rename-section .bss=.bss.efistub,load,alloc
+STUBCOPY_RELOC-$(CONFIG_X86_32)	:= R_386_32
+STUBCOPY_RELOC-$(CONFIG_X86_64)	:= R_X86_64_64
+
+#
+# ARM discards the .data section because it disallows r/w data in the
+# decompressor. So move our .data to .data.efistub and .bss to .bss.efistub,
+# which are preserved explicitly by the decompressor linker script.
+#
+STUBCOPY_FLAGS-$(CONFIG_ARM)	+= --rename-section .data=.data.efistub	\
+				   --rename-section .bss=.bss.efistub,load,alloc
+STUBCOPY_RELOC-$(CONFIG_ARM)	:= R_ARM_ABS
+
 #
 # arm64 puts the stub in the kernel proper, which will unnecessarily retain all
 # code indefinitely unless it is annotated as __init/__initdata/__initconst etc.
@@ -73,8 +95,8 @@ CFLAGS_arm64-stub.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 # a verification pass to see if any absolute relocations exist in any of the
 # object files.
 #
-extra-$(CONFIG_EFI_ARMSTUB)	:= $(lib-y)
-lib-$(CONFIG_EFI_ARMSTUB)	:= $(patsubst %.o,%.stub.o,$(lib-y))
+extra-y				:= $(lib-y)
+lib-y				:= $(patsubst %.o,%.stub.o,$(lib-y))
 
 STUBCOPY_FLAGS-$(CONFIG_ARM64)	+= --prefix-alloc-sections=.init \
 				   --prefix-symbols=__efistub_
@@ -97,11 +119,3 @@ quiet_cmd_stubcopy = STUBCPY $@
 		/bin/false;						\
 	fi;								\
 	$(OBJCOPY) $(STUBCOPY_FLAGS-y) $< $@
-
-#
-# ARM discards the .data section because it disallows r/w data in the
-# decompressor. So move our .data to .data.efistub, which is preserved
-# explicitly by the decompressor linker script.
-#
-STUBCOPY_FLAGS-$(CONFIG_ARM)	+= --rename-section .data=.data.efistub
-STUBCOPY_RELOC-$(CONFIG_ARM)	:= R_ARM_ABS
diff --git a/drivers/firmware/efi/libstub/alignedmem.c b/drivers/firmware/efi/libstub/alignedmem.c
new file mode 100644
index 000000000000..cc89c4d6196f
--- /dev/null
+++ b/drivers/firmware/efi/libstub/alignedmem.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/**
+ * efi_allocate_pages_aligned() - Allocate memory pages
+ * @size:	minimum number of bytes to allocate
+ * @addr:	On return the address of the first allocated page. The first
+ *		allocated page has alignment EFI_ALLOC_ALIGN which is an
+ *		architecture dependent multiple of the page size.
+ * @max:	the address that the last allocated memory page shall not
+ *		exceed
+ * @align:	minimum alignment of the base of the allocation
+ *
+ * Allocate pages as EFI_LOADER_DATA. The allocated pages are aligned according
+ * to @align, which should be >= EFI_ALLOC_ALIGN. The last allocated page will
+ * not exceed the address given by @max.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_allocate_pages_aligned(unsigned long size, unsigned long *addr,
+					unsigned long max, unsigned long align)
+{
+	efi_physical_addr_t alloc_addr;
+	efi_status_t status;
+	int slack;
+
+	if (align < EFI_ALLOC_ALIGN)
+		align = EFI_ALLOC_ALIGN;
+
+	alloc_addr = ALIGN_DOWN(max + 1, align) - 1;
+	size = round_up(size, EFI_ALLOC_ALIGN);
+	slack = align / EFI_PAGE_SIZE - 1;
+
+	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_MAX_ADDRESS,
+			     EFI_LOADER_DATA, size / EFI_PAGE_SIZE + slack,
+			     &alloc_addr);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	*addr = ALIGN((unsigned long)alloc_addr, align);
+
+	if (slack > 0) {
+		int l = (alloc_addr % align) / EFI_PAGE_SIZE;
+
+		if (l) {
+			efi_bs_call(free_pages, alloc_addr, slack - l + 1);
+			slack = l - 1;
+		}
+		if (slack)
+			efi_bs_call(free_pages, *addr + size, slack);
+	}
+	return EFI_SUCCESS;
+}
diff --git a/drivers/firmware/efi/libstub/arm-stub.c b/drivers/firmware/efi/libstub/arm-stub.c
deleted file mode 100644
index 99a5cde7c2d8..000000000000
--- a/drivers/firmware/efi/libstub/arm-stub.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * EFI stub implementation that is shared by arm and arm64 architectures.
- * This should be #included by the EFI stub implementation files.
- *
- * Copyright (C) 2013,2014 Linaro Limited
- *     Roy Franz <roy.franz@linaro.org
- * Copyright (C) 2013 Red Hat, Inc.
- *     Mark Salter <msalter@redhat.com>
- */
-
-#include <linux/efi.h>
-#include <linux/libfdt.h>
-#include <asm/efi.h>
-
-#include "efistub.h"
-
-/*
- * This is the base address at which to start allocating virtual memory ranges
- * for UEFI Runtime Services. This is in the low TTBR0 range so that we can use
- * any allocation we choose, and eliminate the risk of a conflict after kexec.
- * The value chosen is the largest non-zero power of 2 suitable for this purpose
- * both on 32-bit and 64-bit ARM CPUs, to maximize the likelihood that it can
- * be mapped efficiently.
- * Since 32-bit ARM could potentially execute with a 1G/3G user/kernel split,
- * map everything below 1 GB. (512 MB is a reasonable upper bound for the
- * entire footprint of the UEFI runtime services memory regions)
- */
-#define EFI_RT_VIRTUAL_BASE	SZ_512M
-#define EFI_RT_VIRTUAL_SIZE	SZ_512M
-
-#ifdef CONFIG_ARM64
-# define EFI_RT_VIRTUAL_LIMIT	DEFAULT_MAP_WINDOW_64
-#else
-# define EFI_RT_VIRTUAL_LIMIT	TASK_SIZE
-#endif
-
-static u64 virtmap_base = EFI_RT_VIRTUAL_BASE;
-static bool __efistub_global flat_va_mapping;
-
-static efi_system_table_t *__efistub_global sys_table;
-
-__pure efi_system_table_t *efi_system_table(void)
-{
-	return sys_table;
-}
-
-static struct screen_info *setup_graphics(void)
-{
-	efi_guid_t gop_proto = EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID;
-	efi_status_t status;
-	unsigned long size;
-	void **gop_handle = NULL;
-	struct screen_info *si = NULL;
-
-	size = 0;
-	status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL,
-			     &gop_proto, NULL, &size, gop_handle);
-	if (status == EFI_BUFFER_TOO_SMALL) {
-		si = alloc_screen_info();
-		if (!si)
-			return NULL;
-		efi_setup_gop(si, &gop_proto, size);
-	}
-	return si;
-}
-
-void install_memreserve_table(void)
-{
-	struct linux_efi_memreserve *rsv;
-	efi_guid_t memreserve_table_guid = LINUX_EFI_MEMRESERVE_TABLE_GUID;
-	efi_status_t status;
-
-	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, sizeof(*rsv),
-			     (void **)&rsv);
-	if (status != EFI_SUCCESS) {
-		pr_efi_err("Failed to allocate memreserve entry!\n");
-		return;
-	}
-
-	rsv->next = 0;
-	rsv->size = 0;
-	atomic_set(&rsv->count, 0);
-
-	status = efi_bs_call(install_configuration_table,
-			     &memreserve_table_guid, rsv);
-	if (status != EFI_SUCCESS)
-		pr_efi_err("Failed to install memreserve config table!\n");
-}
-
-static unsigned long get_dram_base(void)
-{
-	efi_status_t status;
-	unsigned long map_size, buff_size;
-	unsigned long membase  = EFI_ERROR;
-	struct efi_memory_map map;
-	efi_memory_desc_t *md;
-	struct efi_boot_memmap boot_map;
-
-	boot_map.map		= (efi_memory_desc_t **)&map.map;
-	boot_map.map_size	= &map_size;
-	boot_map.desc_size	= &map.desc_size;
-	boot_map.desc_ver	= NULL;
-	boot_map.key_ptr	= NULL;
-	boot_map.buff_size	= &buff_size;
-
-	status = efi_get_memory_map(&boot_map);
-	if (status != EFI_SUCCESS)
-		return membase;
-
-	map.map_end = map.map + map_size;
-
-	for_each_efi_memory_desc_in_map(&map, md) {
-		if (md->attribute & EFI_MEMORY_WB) {
-			if (membase > md->phys_addr)
-				membase = md->phys_addr;
-		}
-	}
-
-	efi_bs_call(free_pool, map.map);
-
-	return membase;
-}
-
-/*
- * This function handles the architcture specific differences between arm and
- * arm64 regarding where the kernel image must be loaded and any memory that
- * must be reserved. On failure it is required to free all
- * all allocations it has made.
- */
-efi_status_t handle_kernel_image(unsigned long *image_addr,
-				 unsigned long *image_size,
-				 unsigned long *reserve_addr,
-				 unsigned long *reserve_size,
-				 unsigned long dram_base,
-				 efi_loaded_image_t *image);
-
-asmlinkage void __noreturn efi_enter_kernel(unsigned long entrypoint,
-					    unsigned long fdt_addr,
-					    unsigned long fdt_size);
-
-/*
- * EFI entry point for the arm/arm64 EFI stubs.  This is the entrypoint
- * that is described in the PE/COFF header.  Most of the code is the same
- * for both archictectures, with the arch-specific code provided in the
- * handle_kernel_image() function.
- */
-efi_status_t efi_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg)
-{
-	efi_loaded_image_t *image;
-	efi_status_t status;
-	unsigned long image_addr;
-	unsigned long image_size = 0;
-	unsigned long dram_base;
-	/* addr/point and size pairs for memory management*/
-	unsigned long initrd_addr = 0;
-	unsigned long initrd_size = 0;
-	unsigned long fdt_addr = 0;  /* Original DTB */
-	unsigned long fdt_size = 0;
-	char *cmdline_ptr = NULL;
-	int cmdline_size = 0;
-	efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID;
-	unsigned long reserve_addr = 0;
-	unsigned long reserve_size = 0;
-	enum efi_secureboot_mode secure_boot;
-	struct screen_info *si;
-	efi_properties_table_t *prop_tbl;
-	unsigned long max_addr;
-
-	sys_table = sys_table_arg;
-
-	/* Check if we were booted by the EFI firmware */
-	if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) {
-		status = EFI_INVALID_PARAMETER;
-		goto fail;
-	}
-
-	status = check_platform_features();
-	if (status != EFI_SUCCESS)
-		goto fail;
-
-	/*
-	 * Get a handle to the loaded image protocol.  This is used to get
-	 * information about the running image, such as size and the command
-	 * line.
-	 */
-	status = sys_table->boottime->handle_protocol(handle,
-					&loaded_image_proto, (void *)&image);
-	if (status != EFI_SUCCESS) {
-		pr_efi_err("Failed to get loaded image protocol\n");
-		goto fail;
-	}
-
-	dram_base = get_dram_base();
-	if (dram_base == EFI_ERROR) {
-		pr_efi_err("Failed to find DRAM base\n");
-		status = EFI_LOAD_ERROR;
-		goto fail;
-	}
-
-	/*
-	 * Get the command line from EFI, using the LOADED_IMAGE
-	 * protocol. We are going to copy the command line into the
-	 * device tree, so this can be allocated anywhere.
-	 */
-	cmdline_ptr = efi_convert_cmdline(image, &cmdline_size, ULONG_MAX);
-	if (!cmdline_ptr) {
-		pr_efi_err("getting command line via LOADED_IMAGE_PROTOCOL\n");
-		status = EFI_OUT_OF_RESOURCES;
-		goto fail;
-	}
-
-	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
-	    IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
-	    cmdline_size == 0)
-		efi_parse_options(CONFIG_CMDLINE);
-
-	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && cmdline_size > 0)
-		efi_parse_options(cmdline_ptr);
-
-	pr_efi("Booting Linux Kernel...\n");
-
-	si = setup_graphics();
-
-	status = handle_kernel_image(&image_addr, &image_size,
-				     &reserve_addr,
-				     &reserve_size,
-				     dram_base, image);
-	if (status != EFI_SUCCESS) {
-		pr_efi_err("Failed to relocate kernel\n");
-		goto fail_free_cmdline;
-	}
-
-	efi_retrieve_tpm2_eventlog();
-
-	/* Ask the firmware to clear memory on unclean shutdown */
-	efi_enable_reset_attack_mitigation();
-
-	secure_boot = efi_get_secureboot();
-
-	/*
-	 * Unauthenticated device tree data is a security hazard, so ignore
-	 * 'dtb=' unless UEFI Secure Boot is disabled.  We assume that secure
-	 * boot is enabled if we can't determine its state.
-	 */
-	if (!IS_ENABLED(CONFIG_EFI_ARMSTUB_DTB_LOADER) ||
-	     secure_boot != efi_secureboot_mode_disabled) {
-		if (strstr(cmdline_ptr, "dtb="))
-			pr_efi("Ignoring DTB from command line.\n");
-	} else {
-		status = efi_load_dtb(image, &fdt_addr, &fdt_size);
-
-		if (status != EFI_SUCCESS) {
-			pr_efi_err("Failed to load device tree!\n");
-			goto fail_free_image;
-		}
-	}
-
-	if (fdt_addr) {
-		pr_efi("Using DTB from command line\n");
-	} else {
-		/* Look for a device tree configuration table entry. */
-		fdt_addr = (uintptr_t)get_fdt(&fdt_size);
-		if (fdt_addr)
-			pr_efi("Using DTB from configuration table\n");
-	}
-
-	if (!fdt_addr)
-		pr_efi("Generating empty DTB\n");
-
-	if (!noinitrd()) {
-		max_addr = efi_get_max_initrd_addr(dram_base, image_addr);
-		status = efi_load_initrd_dev_path(&initrd_addr, &initrd_size,
-						  max_addr);
-		if (status == EFI_SUCCESS) {
-			pr_efi("Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path\n");
-		} else if (status == EFI_NOT_FOUND) {
-			status = efi_load_initrd(image, &initrd_addr, &initrd_size,
-						 ULONG_MAX, max_addr);
-			if (status == EFI_SUCCESS && initrd_size > 0)
-				pr_efi("Loaded initrd from command line option\n");
-		}
-		if (status != EFI_SUCCESS)
-			pr_efi_err("Failed to load initrd!\n");
-	}
-
-	efi_random_get_seed();
-
-	/*
-	 * If the NX PE data feature is enabled in the properties table, we
-	 * should take care not to create a virtual mapping that changes the
-	 * relative placement of runtime services code and data regions, as
-	 * they may belong to the same PE/COFF executable image in memory.
-	 * The easiest way to achieve that is to simply use a 1:1 mapping.
-	 */
-	prop_tbl = get_efi_config_table(EFI_PROPERTIES_TABLE_GUID);
-	flat_va_mapping = prop_tbl &&
-			  (prop_tbl->memory_protection_attribute &
-			   EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA);
-
-	/* hibernation expects the runtime regions to stay in the same place */
-	if (!IS_ENABLED(CONFIG_HIBERNATION) && !nokaslr() && !flat_va_mapping) {
-		/*
-		 * Randomize the base of the UEFI runtime services region.
-		 * Preserve the 2 MB alignment of the region by taking a
-		 * shift of 21 bit positions into account when scaling
-		 * the headroom value using a 32-bit random value.
-		 */
-		static const u64 headroom = EFI_RT_VIRTUAL_LIMIT -
-					    EFI_RT_VIRTUAL_BASE -
-					    EFI_RT_VIRTUAL_SIZE;
-		u32 rnd;
-
-		status = efi_get_random_bytes(sizeof(rnd), (u8 *)&rnd);
-		if (status == EFI_SUCCESS) {
-			virtmap_base = EFI_RT_VIRTUAL_BASE +
-				       (((headroom >> 21) * rnd) >> (32 - 21));
-		}
-	}
-
-	install_memreserve_table();
-
-	status = allocate_new_fdt_and_exit_boot(handle, &fdt_addr,
-						efi_get_max_fdt_addr(dram_base),
-						initrd_addr, initrd_size,
-						cmdline_ptr, fdt_addr, fdt_size);
-	if (status != EFI_SUCCESS)
-		goto fail_free_initrd;
-
-	efi_enter_kernel(image_addr, fdt_addr, fdt_totalsize((void *)fdt_addr));
-	/* not reached */
-
-fail_free_initrd:
-	pr_efi_err("Failed to update FDT and exit boot services\n");
-
-	efi_free(initrd_size, initrd_addr);
-	efi_free(fdt_size, fdt_addr);
-
-fail_free_image:
-	efi_free(image_size, image_addr);
-	efi_free(reserve_size, reserve_addr);
-fail_free_cmdline:
-	free_screen_info(si);
-	efi_free(cmdline_size, (unsigned long)cmdline_ptr);
-fail:
-	return status;
-}
-
-/*
- * efi_get_virtmap() - create a virtual mapping for the EFI memory map
- *
- * This function populates the virt_addr fields of all memory region descriptors
- * in @memory_map whose EFI_MEMORY_RUNTIME attribute is set. Those descriptors
- * are also copied to @runtime_map, and their total count is returned in @count.
- */
-void efi_get_virtmap(efi_memory_desc_t *memory_map, unsigned long map_size,
-		     unsigned long desc_size, efi_memory_desc_t *runtime_map,
-		     int *count)
-{
-	u64 efi_virt_base = virtmap_base;
-	efi_memory_desc_t *in, *out = runtime_map;
-	int l;
-
-	for (l = 0; l < map_size; l += desc_size) {
-		u64 paddr, size;
-
-		in = (void *)memory_map + l;
-		if (!(in->attribute & EFI_MEMORY_RUNTIME))
-			continue;
-
-		paddr = in->phys_addr;
-		size = in->num_pages * EFI_PAGE_SIZE;
-
-		in->virt_addr = in->phys_addr;
-		if (novamap()) {
-			continue;
-		}
-
-		/*
-		 * Make the mapping compatible with 64k pages: this allows
-		 * a 4k page size kernel to kexec a 64k page size kernel and
-		 * vice versa.
-		 */
-		if (!flat_va_mapping) {
-
-			paddr = round_down(in->phys_addr, SZ_64K);
-			size += in->phys_addr - paddr;
-
-			/*
-			 * Avoid wasting memory on PTEs by choosing a virtual
-			 * base that is compatible with section mappings if this
-			 * region has the appropriate size and physical
-			 * alignment. (Sections are 2 MB on 4k granule kernels)
-			 */
-			if (IS_ALIGNED(in->phys_addr, SZ_2M) && size >= SZ_2M)
-				efi_virt_base = round_up(efi_virt_base, SZ_2M);
-			else
-				efi_virt_base = round_up(efi_virt_base, SZ_64K);
-
-			in->virt_addr += efi_virt_base - paddr;
-			efi_virt_base += size;
-		}
-
-		memcpy(out, in, desc_size);
-		out = (void *)out + desc_size;
-		++*count;
-	}
-}
diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c
index fc9f8ab533a7..ba4db35015a3 100644
--- a/drivers/firmware/efi/libstub/arm64-stub.c
+++ b/drivers/firmware/efi/libstub/arm64-stub.c
@@ -34,6 +34,15 @@ efi_status_t check_platform_features(void)
 	return EFI_SUCCESS;
 }
 
+/*
+ * Relocatable kernels can fix up the misalignment with respect to
+ * MIN_KIMG_ALIGN, so they only require a minimum alignment of EFI_KIMG_ALIGN
+ * (which accounts for the alignment of statically allocated objects such as
+ * the swapper stack.)
+ */
+static const u64 min_kimg_align = IS_ENABLED(CONFIG_RELOCATABLE) ? EFI_KIMG_ALIGN
+								 : MIN_KIMG_ALIGN;
+
 efi_status_t handle_kernel_image(unsigned long *image_addr,
 				 unsigned long *image_size,
 				 unsigned long *reserve_addr,
@@ -43,11 +52,10 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 {
 	efi_status_t status;
 	unsigned long kernel_size, kernel_memsize = 0;
-	unsigned long preferred_offset;
-	u64 phys_seed = 0;
+	u32 phys_seed = 0;
 
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
-		if (!nokaslr()) {
+		if (!efi_nokaslr) {
 			status = efi_get_random_bytes(sizeof(phys_seed),
 						      (u8 *)&phys_seed);
 			if (status == EFI_NOT_FOUND) {
@@ -61,88 +69,46 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 		}
 	}
 
-	/*
-	 * The preferred offset of the kernel Image is TEXT_OFFSET bytes beyond
-	 * a 2 MB aligned base, which itself may be lower than dram_base, as
-	 * long as the resulting offset equals or exceeds it.
-	 */
-	preferred_offset = round_down(dram_base, MIN_KIMG_ALIGN) + TEXT_OFFSET;
-	if (preferred_offset < dram_base)
-		preferred_offset += MIN_KIMG_ALIGN;
+	if (image->image_base != _text)
+		pr_efi_err("FIRMWARE BUG: efi_loaded_image_t::image_base has bogus value\n");
 
 	kernel_size = _edata - _text;
 	kernel_memsize = kernel_size + (_end - _edata);
+	*reserve_size = kernel_memsize + TEXT_OFFSET % min_kimg_align;
 
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && phys_seed != 0) {
-		/*
-		 * Produce a displacement in the interval [0, MIN_KIMG_ALIGN)
-		 * that doesn't violate this kernel's de-facto alignment
-		 * constraints.
-		 */
-		u32 mask = (MIN_KIMG_ALIGN - 1) & ~(EFI_KIMG_ALIGN - 1);
-		u32 offset = (phys_seed >> 32) & mask;
-
-		/*
-		 * With CONFIG_RANDOMIZE_TEXT_OFFSET=y, TEXT_OFFSET may not
-		 * be a multiple of EFI_KIMG_ALIGN, and we must ensure that
-		 * we preserve the misalignment of 'offset' relative to
-		 * EFI_KIMG_ALIGN so that statically allocated objects whose
-		 * alignment exceeds PAGE_SIZE appear correctly aligned in
-		 * memory.
-		 */
-		offset |= TEXT_OFFSET % EFI_KIMG_ALIGN;
-
 		/*
 		 * If KASLR is enabled, and we have some randomness available,
 		 * locate the kernel at a randomized offset in physical memory.
 		 */
-		*reserve_size = kernel_memsize + offset;
-		status = efi_random_alloc(*reserve_size,
-					  MIN_KIMG_ALIGN, reserve_addr,
-					  (u32)phys_seed);
-
-		*image_addr = *reserve_addr + offset;
+		status = efi_random_alloc(*reserve_size, min_kimg_align,
+					  reserve_addr, phys_seed);
 	} else {
-		/*
-		 * Else, try a straight allocation at the preferred offset.
-		 * This will work around the issue where, if dram_base == 0x0,
-		 * efi_low_alloc() refuses to allocate at 0x0 (to prevent the
-		 * address of the allocation to be mistaken for a FAIL return
-		 * value or a NULL pointer). It will also ensure that, on
-		 * platforms where the [dram_base, dram_base + TEXT_OFFSET)
-		 * interval is partially occupied by the firmware (like on APM
-		 * Mustang), we can still place the kernel at the address
-		 * 'dram_base + TEXT_OFFSET'.
-		 */
-		*image_addr = (unsigned long)_text;
-		if (*image_addr == preferred_offset)
-			return EFI_SUCCESS;
-
-		*image_addr = *reserve_addr = preferred_offset;
-		*reserve_size = round_up(kernel_memsize, EFI_ALLOC_ALIGN);
-
-		status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
-				     EFI_LOADER_DATA,
-				     *reserve_size / EFI_PAGE_SIZE,
-				     (efi_physical_addr_t *)reserve_addr);
+		status = EFI_OUT_OF_RESOURCES;
 	}
 
 	if (status != EFI_SUCCESS) {
-		*reserve_size = kernel_memsize + TEXT_OFFSET;
-		status = efi_low_alloc(*reserve_size,
-				       MIN_KIMG_ALIGN, reserve_addr);
+		if (IS_ALIGNED((u64)_text - TEXT_OFFSET, min_kimg_align)) {
+			/*
+			 * Just execute from wherever we were loaded by the
+			 * UEFI PE/COFF loader if the alignment is suitable.
+			 */
+			*image_addr = (u64)_text;
+			*reserve_size = 0;
+			return EFI_SUCCESS;
+		}
+
+		status = efi_allocate_pages_aligned(*reserve_size, reserve_addr,
+						    ULONG_MAX, min_kimg_align);
 
 		if (status != EFI_SUCCESS) {
 			pr_efi_err("Failed to relocate kernel\n");
 			*reserve_size = 0;
 			return status;
 		}
-		*image_addr = *reserve_addr + TEXT_OFFSET;
 	}
 
-	if (image->image_base != _text)
-		pr_efi_err("FIRMWARE BUG: efi_loaded_image_t::image_base has bogus value\n");
-
+	*image_addr = *reserve_addr + TEXT_OFFSET % min_kimg_align;
 	memcpy((void *)*image_addr, _text, kernel_size);
 
 	return EFI_SUCCESS;
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index 9f34c7242939..1c92ac231f94 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -12,35 +12,15 @@
 
 #include "efistub.h"
 
-static bool __efistub_global efi_nochunk;
-static bool __efistub_global efi_nokaslr;
-static bool __efistub_global efi_noinitrd;
-static bool __efistub_global efi_quiet;
-static bool __efistub_global efi_novamap;
-static bool __efistub_global efi_nosoftreserve;
-static bool __efistub_global efi_disable_pci_dma =
-					IS_ENABLED(CONFIG_EFI_DISABLE_PCI_DMA);
-
-bool __pure nochunk(void)
-{
-	return efi_nochunk;
-}
-bool __pure nokaslr(void)
-{
-	return efi_nokaslr;
-}
-bool __pure noinitrd(void)
-{
-	return efi_noinitrd;
-}
-bool __pure is_quiet(void)
-{
-	return efi_quiet;
-}
-bool __pure novamap(void)
-{
-	return efi_novamap;
-}
+bool efi_nochunk;
+bool efi_nokaslr;
+bool efi_noinitrd;
+bool efi_quiet;
+bool efi_novamap;
+
+static bool efi_nosoftreserve;
+static bool efi_disable_pci_dma = IS_ENABLED(CONFIG_EFI_DISABLE_PCI_DMA);
+
 bool __pure __efi_soft_reserve_enabled(void)
 {
 	return !efi_nosoftreserve;
@@ -105,6 +85,9 @@ efi_status_t efi_parse_options(char const *cmdline)
 				efi_disable_pci_dma = true;
 			if (parse_option_str(val, "no_disable_early_pci_dma"))
 				efi_disable_pci_dma = false;
+		} else if (!strcmp(param, "video") &&
+			   val && strstarts(val, "efifb:")) {
+			efi_parse_option_graphics(val + strlen("efifb:"));
 		}
 	}
 	efi_bs_call(free_pool, buf);
@@ -285,8 +268,8 @@ efi_status_t efi_exit_boot_services(void *handle,
 
 void *get_efi_config_table(efi_guid_t guid)
 {
-	unsigned long tables = efi_table_attr(efi_system_table(), tables);
-	int nr_tables = efi_table_attr(efi_system_table(), nr_tables);
+	unsigned long tables = efi_table_attr(efi_system_table, tables);
+	int nr_tables = efi_table_attr(efi_system_table, nr_tables);
 	int i;
 
 	for (i = 0; i < nr_tables; i++) {
@@ -303,7 +286,7 @@ void *get_efi_config_table(efi_guid_t guid)
 
 void efi_char16_printk(efi_char16_t *str)
 {
-	efi_call_proto(efi_table_attr(efi_system_table(), con_out),
+	efi_call_proto(efi_table_attr(efi_system_table, con_out),
 		       output_string, str);
 }
 
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
new file mode 100644
index 000000000000..ee225b323687
--- /dev/null
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * EFI stub implementation that is shared by arm and arm64 architectures.
+ * This should be #included by the EFI stub implementation files.
+ *
+ * Copyright (C) 2013,2014 Linaro Limited
+ *     Roy Franz <roy.franz@linaro.org
+ * Copyright (C) 2013 Red Hat, Inc.
+ *     Mark Salter <msalter@redhat.com>
+ */
+
+#include <linux/efi.h>
+#include <linux/libfdt.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/*
+ * This is the base address at which to start allocating virtual memory ranges
+ * for UEFI Runtime Services. This is in the low TTBR0 range so that we can use
+ * any allocation we choose, and eliminate the risk of a conflict after kexec.
+ * The value chosen is the largest non-zero power of 2 suitable for this purpose
+ * both on 32-bit and 64-bit ARM CPUs, to maximize the likelihood that it can
+ * be mapped efficiently.
+ * Since 32-bit ARM could potentially execute with a 1G/3G user/kernel split,
+ * map everything below 1 GB. (512 MB is a reasonable upper bound for the
+ * entire footprint of the UEFI runtime services memory regions)
+ */
+#define EFI_RT_VIRTUAL_BASE	SZ_512M
+#define EFI_RT_VIRTUAL_SIZE	SZ_512M
+
+#ifdef CONFIG_ARM64
+# define EFI_RT_VIRTUAL_LIMIT	DEFAULT_MAP_WINDOW_64
+#else
+# define EFI_RT_VIRTUAL_LIMIT	TASK_SIZE
+#endif
+
+static u64 virtmap_base = EFI_RT_VIRTUAL_BASE;
+static bool flat_va_mapping;
+
+const efi_system_table_t *efi_system_table;
+
+static struct screen_info *setup_graphics(void)
+{
+	efi_guid_t gop_proto = EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID;
+	efi_status_t status;
+	unsigned long size;
+	void **gop_handle = NULL;
+	struct screen_info *si = NULL;
+
+	size = 0;
+	status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL,
+			     &gop_proto, NULL, &size, gop_handle);
+	if (status == EFI_BUFFER_TOO_SMALL) {
+		si = alloc_screen_info();
+		if (!si)
+			return NULL;
+		efi_setup_gop(si, &gop_proto, size);
+	}
+	return si;
+}
+
+static void install_memreserve_table(void)
+{
+	struct linux_efi_memreserve *rsv;
+	efi_guid_t memreserve_table_guid = LINUX_EFI_MEMRESERVE_TABLE_GUID;
+	efi_status_t status;
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, sizeof(*rsv),
+			     (void **)&rsv);
+	if (status != EFI_SUCCESS) {
+		pr_efi_err("Failed to allocate memreserve entry!\n");
+		return;
+	}
+
+	rsv->next = 0;
+	rsv->size = 0;
+	atomic_set(&rsv->count, 0);
+
+	status = efi_bs_call(install_configuration_table,
+			     &memreserve_table_guid, rsv);
+	if (status != EFI_SUCCESS)
+		pr_efi_err("Failed to install memreserve config table!\n");
+}
+
+static unsigned long get_dram_base(void)
+{
+	efi_status_t status;
+	unsigned long map_size, buff_size;
+	unsigned long membase  = EFI_ERROR;
+	struct efi_memory_map map;
+	efi_memory_desc_t *md;
+	struct efi_boot_memmap boot_map;
+
+	boot_map.map		= (efi_memory_desc_t **)&map.map;
+	boot_map.map_size	= &map_size;
+	boot_map.desc_size	= &map.desc_size;
+	boot_map.desc_ver	= NULL;
+	boot_map.key_ptr	= NULL;
+	boot_map.buff_size	= &buff_size;
+
+	status = efi_get_memory_map(&boot_map);
+	if (status != EFI_SUCCESS)
+		return membase;
+
+	map.map_end = map.map + map_size;
+
+	for_each_efi_memory_desc_in_map(&map, md) {
+		if (md->attribute & EFI_MEMORY_WB) {
+			if (membase > md->phys_addr)
+				membase = md->phys_addr;
+		}
+	}
+
+	efi_bs_call(free_pool, map.map);
+
+	return membase;
+}
+
+/*
+ * This function handles the architcture specific differences between arm and
+ * arm64 regarding where the kernel image must be loaded and any memory that
+ * must be reserved. On failure it is required to free all
+ * all allocations it has made.
+ */
+efi_status_t handle_kernel_image(unsigned long *image_addr,
+				 unsigned long *image_size,
+				 unsigned long *reserve_addr,
+				 unsigned long *reserve_size,
+				 unsigned long dram_base,
+				 efi_loaded_image_t *image);
+
+asmlinkage void __noreturn efi_enter_kernel(unsigned long entrypoint,
+					    unsigned long fdt_addr,
+					    unsigned long fdt_size);
+
+/*
+ * EFI entry point for the arm/arm64 EFI stubs.  This is the entrypoint
+ * that is described in the PE/COFF header.  Most of the code is the same
+ * for both archictectures, with the arch-specific code provided in the
+ * handle_kernel_image() function.
+ */
+efi_status_t efi_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg)
+{
+	efi_loaded_image_t *image;
+	efi_status_t status;
+	unsigned long image_addr;
+	unsigned long image_size = 0;
+	unsigned long dram_base;
+	/* addr/point and size pairs for memory management*/
+	unsigned long initrd_addr = 0;
+	unsigned long initrd_size = 0;
+	unsigned long fdt_addr = 0;  /* Original DTB */
+	unsigned long fdt_size = 0;
+	char *cmdline_ptr = NULL;
+	int cmdline_size = 0;
+	efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID;
+	unsigned long reserve_addr = 0;
+	unsigned long reserve_size = 0;
+	enum efi_secureboot_mode secure_boot;
+	struct screen_info *si;
+	efi_properties_table_t *prop_tbl;
+	unsigned long max_addr;
+
+	efi_system_table = sys_table_arg;
+
+	/* Check if we were booted by the EFI firmware */
+	if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) {
+		status = EFI_INVALID_PARAMETER;
+		goto fail;
+	}
+
+	status = check_platform_features();
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	/*
+	 * Get a handle to the loaded image protocol.  This is used to get
+	 * information about the running image, such as size and the command
+	 * line.
+	 */
+	status = efi_system_table->boottime->handle_protocol(handle,
+					&loaded_image_proto, (void *)&image);
+	if (status != EFI_SUCCESS) {
+		pr_efi_err("Failed to get loaded image protocol\n");
+		goto fail;
+	}
+
+	dram_base = get_dram_base();
+	if (dram_base == EFI_ERROR) {
+		pr_efi_err("Failed to find DRAM base\n");
+		status = EFI_LOAD_ERROR;
+		goto fail;
+	}
+
+	/*
+	 * Get the command line from EFI, using the LOADED_IMAGE
+	 * protocol. We are going to copy the command line into the
+	 * device tree, so this can be allocated anywhere.
+	 */
+	cmdline_ptr = efi_convert_cmdline(image, &cmdline_size, ULONG_MAX);
+	if (!cmdline_ptr) {
+		pr_efi_err("getting command line via LOADED_IMAGE_PROTOCOL\n");
+		status = EFI_OUT_OF_RESOURCES;
+		goto fail;
+	}
+
+	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
+	    IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
+	    cmdline_size == 0)
+		efi_parse_options(CONFIG_CMDLINE);
+
+	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && cmdline_size > 0)
+		efi_parse_options(cmdline_ptr);
+
+	pr_efi("Booting Linux Kernel...\n");
+
+	si = setup_graphics();
+
+	status = handle_kernel_image(&image_addr, &image_size,
+				     &reserve_addr,
+				     &reserve_size,
+				     dram_base, image);
+	if (status != EFI_SUCCESS) {
+		pr_efi_err("Failed to relocate kernel\n");
+		goto fail_free_cmdline;
+	}
+
+	efi_retrieve_tpm2_eventlog();
+
+	/* Ask the firmware to clear memory on unclean shutdown */
+	efi_enable_reset_attack_mitigation();
+
+	secure_boot = efi_get_secureboot();
+
+	/*
+	 * Unauthenticated device tree data is a security hazard, so ignore
+	 * 'dtb=' unless UEFI Secure Boot is disabled.  We assume that secure
+	 * boot is enabled if we can't determine its state.
+	 */
+	if (!IS_ENABLED(CONFIG_EFI_ARMSTUB_DTB_LOADER) ||
+	     secure_boot != efi_secureboot_mode_disabled) {
+		if (strstr(cmdline_ptr, "dtb="))
+			pr_efi("Ignoring DTB from command line.\n");
+	} else {
+		status = efi_load_dtb(image, &fdt_addr, &fdt_size);
+
+		if (status != EFI_SUCCESS) {
+			pr_efi_err("Failed to load device tree!\n");
+			goto fail_free_image;
+		}
+	}
+
+	if (fdt_addr) {
+		pr_efi("Using DTB from command line\n");
+	} else {
+		/* Look for a device tree configuration table entry. */
+		fdt_addr = (uintptr_t)get_fdt(&fdt_size);
+		if (fdt_addr)
+			pr_efi("Using DTB from configuration table\n");
+	}
+
+	if (!fdt_addr)
+		pr_efi("Generating empty DTB\n");
+
+	if (!efi_noinitrd) {
+		max_addr = efi_get_max_initrd_addr(dram_base, image_addr);
+		status = efi_load_initrd_dev_path(&initrd_addr, &initrd_size,
+						  max_addr);
+		if (status == EFI_SUCCESS) {
+			pr_efi("Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path\n");
+		} else if (status == EFI_NOT_FOUND) {
+			status = efi_load_initrd(image, &initrd_addr, &initrd_size,
+						 ULONG_MAX, max_addr);
+			if (status == EFI_SUCCESS && initrd_size > 0)
+				pr_efi("Loaded initrd from command line option\n");
+		}
+		if (status != EFI_SUCCESS)
+			pr_efi_err("Failed to load initrd!\n");
+	}
+
+	efi_random_get_seed();
+
+	/*
+	 * If the NX PE data feature is enabled in the properties table, we
+	 * should take care not to create a virtual mapping that changes the
+	 * relative placement of runtime services code and data regions, as
+	 * they may belong to the same PE/COFF executable image in memory.
+	 * The easiest way to achieve that is to simply use a 1:1 mapping.
+	 */
+	prop_tbl = get_efi_config_table(EFI_PROPERTIES_TABLE_GUID);
+	flat_va_mapping = prop_tbl &&
+			  (prop_tbl->memory_protection_attribute &
+			   EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA);
+
+	/* hibernation expects the runtime regions to stay in the same place */
+	if (!IS_ENABLED(CONFIG_HIBERNATION) && !efi_nokaslr && !flat_va_mapping) {
+		/*
+		 * Randomize the base of the UEFI runtime services region.
+		 * Preserve the 2 MB alignment of the region by taking a
+		 * shift of 21 bit positions into account when scaling
+		 * the headroom value using a 32-bit random value.
+		 */
+		static const u64 headroom = EFI_RT_VIRTUAL_LIMIT -
+					    EFI_RT_VIRTUAL_BASE -
+					    EFI_RT_VIRTUAL_SIZE;
+		u32 rnd;
+
+		status = efi_get_random_bytes(sizeof(rnd), (u8 *)&rnd);
+		if (status == EFI_SUCCESS) {
+			virtmap_base = EFI_RT_VIRTUAL_BASE +
+				       (((headroom >> 21) * rnd) >> (32 - 21));
+		}
+	}
+
+	install_memreserve_table();
+
+	status = allocate_new_fdt_and_exit_boot(handle, &fdt_addr,
+						efi_get_max_fdt_addr(dram_base),
+						initrd_addr, initrd_size,
+						cmdline_ptr, fdt_addr, fdt_size);
+	if (status != EFI_SUCCESS)
+		goto fail_free_initrd;
+
+	efi_enter_kernel(image_addr, fdt_addr, fdt_totalsize((void *)fdt_addr));
+	/* not reached */
+
+fail_free_initrd:
+	pr_efi_err("Failed to update FDT and exit boot services\n");
+
+	efi_free(initrd_size, initrd_addr);
+	efi_free(fdt_size, fdt_addr);
+
+fail_free_image:
+	efi_free(image_size, image_addr);
+	efi_free(reserve_size, reserve_addr);
+fail_free_cmdline:
+	free_screen_info(si);
+	efi_free(cmdline_size, (unsigned long)cmdline_ptr);
+fail:
+	return status;
+}
+
+/*
+ * efi_get_virtmap() - create a virtual mapping for the EFI memory map
+ *
+ * This function populates the virt_addr fields of all memory region descriptors
+ * in @memory_map whose EFI_MEMORY_RUNTIME attribute is set. Those descriptors
+ * are also copied to @runtime_map, and their total count is returned in @count.
+ */
+void efi_get_virtmap(efi_memory_desc_t *memory_map, unsigned long map_size,
+		     unsigned long desc_size, efi_memory_desc_t *runtime_map,
+		     int *count)
+{
+	u64 efi_virt_base = virtmap_base;
+	efi_memory_desc_t *in, *out = runtime_map;
+	int l;
+
+	for (l = 0; l < map_size; l += desc_size) {
+		u64 paddr, size;
+
+		in = (void *)memory_map + l;
+		if (!(in->attribute & EFI_MEMORY_RUNTIME))
+			continue;
+
+		paddr = in->phys_addr;
+		size = in->num_pages * EFI_PAGE_SIZE;
+
+		in->virt_addr = in->phys_addr;
+		if (efi_novamap) {
+			continue;
+		}
+
+		/*
+		 * Make the mapping compatible with 64k pages: this allows
+		 * a 4k page size kernel to kexec a 64k page size kernel and
+		 * vice versa.
+		 */
+		if (!flat_va_mapping) {
+
+			paddr = round_down(in->phys_addr, SZ_64K);
+			size += in->phys_addr - paddr;
+
+			/*
+			 * Avoid wasting memory on PTEs by choosing a virtual
+			 * base that is compatible with section mappings if this
+			 * region has the appropriate size and physical
+			 * alignment. (Sections are 2 MB on 4k granule kernels)
+			 */
+			if (IS_ALIGNED(in->phys_addr, SZ_2M) && size >= SZ_2M)
+				efi_virt_base = round_up(efi_virt_base, SZ_2M);
+			else
+				efi_virt_base = round_up(efi_virt_base, SZ_64K);
+
+			in->virt_addr += efi_virt_base - paddr;
+			efi_virt_base += size;
+		}
+
+		memcpy(out, in, desc_size);
+		out = (void *)out + desc_size;
+		++*count;
+	}
+}
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index 67d26949fd26..5ff63230a1f1 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -25,22 +25,32 @@
 #define EFI_ALLOC_ALIGN		EFI_PAGE_SIZE
 #endif
 
-#if defined(CONFIG_ARM) || defined(CONFIG_X86)
-#define __efistub_global	__section(.data)
-#else
-#define __efistub_global
-#endif
+extern bool efi_nochunk;
+extern bool efi_nokaslr;
+extern bool efi_noinitrd;
+extern bool efi_quiet;
+extern bool efi_novamap;
 
-extern bool __pure nochunk(void);
-extern bool __pure nokaslr(void);
-extern bool __pure noinitrd(void);
-extern bool __pure is_quiet(void);
-extern bool __pure novamap(void);
+extern const efi_system_table_t *efi_system_table;
 
-extern __pure efi_system_table_t  *efi_system_table(void);
+#ifndef efi_bs_call
+#define efi_bs_call(func, ...)	efi_system_table->boottime->func(__VA_ARGS__)
+#endif
+#ifndef efi_rt_call
+#define efi_rt_call(func, ...)	efi_system_table->runtime->func(__VA_ARGS__)
+#endif
+#ifndef efi_is_native
+#define efi_is_native()		(true)
+#endif
+#ifndef efi_table_attr
+#define efi_table_attr(inst, attr)	(inst->attr)
+#endif
+#ifndef efi_call_proto
+#define efi_call_proto(inst, func, ...) inst->func(inst, ##__VA_ARGS__)
+#endif
 
 #define pr_efi(msg)		do {			\
-	if (!is_quiet()) efi_printk("EFI stub: "msg);	\
+	if (!efi_quiet) efi_printk("EFI stub: "msg);	\
 } while (0)
 
 #define pr_efi_err(msg) efi_printk("EFI stub: ERROR: "msg)
@@ -298,8 +308,10 @@ typedef union efi_graphics_output_protocol efi_graphics_output_protocol_t;
 
 union efi_graphics_output_protocol {
 	struct {
-		void *query_mode;
-		void *set_mode;
+		efi_status_t (__efiapi *query_mode)(efi_graphics_output_protocol_t *,
+						    u32, unsigned long *,
+						    efi_graphics_output_mode_info_t **);
+		efi_status_t (__efiapi *set_mode)  (efi_graphics_output_protocol_t *, u32);
 		void *blt;
 		efi_graphics_output_protocol_mode_t *mode;
 	};
@@ -621,24 +633,12 @@ char *efi_convert_cmdline(efi_loaded_image_t *image, int *cmd_line_len,
 
 efi_status_t efi_get_memory_map(struct efi_boot_memmap *map);
 
-efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
-				 unsigned long *addr, unsigned long min);
-
-static inline
-efi_status_t efi_low_alloc(unsigned long size, unsigned long align,
-			   unsigned long *addr)
-{
-	/*
-	 * Don't allocate at 0x0. It will confuse code that
-	 * checks pointers against NULL. Skip the first 8
-	 * bytes so we start at a nice even number.
-	 */
-	return efi_low_alloc_above(size, align, addr, 0x8);
-}
-
 efi_status_t efi_allocate_pages(unsigned long size, unsigned long *addr,
 				unsigned long max);
 
+efi_status_t efi_allocate_pages_aligned(unsigned long size, unsigned long *addr,
+					unsigned long max, unsigned long align);
+
 efi_status_t efi_relocate_kernel(unsigned long *image_addr,
 				 unsigned long image_size,
 				 unsigned long alloc_size,
@@ -648,18 +648,40 @@ efi_status_t efi_relocate_kernel(unsigned long *image_addr,
 
 efi_status_t efi_parse_options(char const *cmdline);
 
+void efi_parse_option_graphics(char *option);
+
 efi_status_t efi_setup_gop(struct screen_info *si, efi_guid_t *proto,
 			   unsigned long size);
 
-efi_status_t efi_load_dtb(efi_loaded_image_t *image,
-			  unsigned long *load_addr,
-			  unsigned long *load_size);
+efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
+				  const efi_char16_t *optstr,
+				  int optstr_size,
+				  unsigned long soft_limit,
+				  unsigned long hard_limit,
+				  unsigned long *load_addr,
+				  unsigned long *load_size);
+
+
+static inline efi_status_t efi_load_dtb(efi_loaded_image_t *image,
+					unsigned long *load_addr,
+					unsigned long *load_size)
+{
+	return handle_cmdline_files(image, L"dtb=", sizeof(L"dtb=") - 2,
+				    ULONG_MAX, ULONG_MAX, load_addr, load_size);
+}
 
-efi_status_t efi_load_initrd(efi_loaded_image_t *image,
-			     unsigned long *load_addr,
-			     unsigned long *load_size,
-			     unsigned long soft_limit,
-			     unsigned long hard_limit);
+static inline efi_status_t efi_load_initrd(efi_loaded_image_t *image,
+					   unsigned long *load_addr,
+					   unsigned long *load_size,
+					   unsigned long soft_limit,
+					   unsigned long hard_limit)
+{
+	if (!IS_ENABLED(CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER))
+		return EFI_SUCCESS;
+
+	return handle_cmdline_files(image, L"initrd=", sizeof(L"initrd=") - 2,
+				    soft_limit, hard_limit, load_addr, load_size);
+}
 
 efi_status_t efi_load_initrd_dev_path(unsigned long *load_addr,
 				      unsigned long *load_size,
diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c
index 46cffac7a5f1..3074a5e27c65 100644
--- a/drivers/firmware/efi/libstub/fdt.c
+++ b/drivers/firmware/efi/libstub/fdt.c
@@ -110,7 +110,7 @@ static efi_status_t update_fdt(void *orig_fdt, unsigned long orig_fdt_size,
 
 	/* Add FDT entries for EFI runtime services in chosen node. */
 	node = fdt_subnode_offset(fdt, 0, "chosen");
-	fdt_val64 = cpu_to_fdt64((u64)(unsigned long)efi_system_table());
+	fdt_val64 = cpu_to_fdt64((u64)(unsigned long)efi_system_table);
 
 	status = fdt_setprop_var(fdt, node, "linux,uefi-system-table", fdt_val64);
 	if (status)
@@ -310,11 +310,11 @@ efi_status_t allocate_new_fdt_and_exit_boot(void *handle,
 	if (status == EFI_SUCCESS) {
 		efi_set_virtual_address_map_t *svam;
 
-		if (novamap())
+		if (efi_novamap)
 			return EFI_SUCCESS;
 
 		/* Install the new virtual address map */
-		svam = efi_system_table()->runtime->set_virtual_address_map;
+		svam = efi_system_table->runtime->set_virtual_address_map;
 		status = svam(runtime_entry_count * desc_size, desc_size,
 			      desc_ver, runtime_map);
 
@@ -348,7 +348,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(void *handle,
 	efi_free(MAX_FDT_SIZE, *new_fdt_addr);
 
 fail:
-	efi_system_table()->boottime->free_pool(runtime_map);
+	efi_system_table->boottime->free_pool(runtime_map);
 
 	return EFI_LOAD_ERROR;
 }
diff --git a/drivers/firmware/efi/libstub/file.c b/drivers/firmware/efi/libstub/file.c
index ea66b1f16a79..50aaf15f9ad5 100644
--- a/drivers/firmware/efi/libstub/file.c
+++ b/drivers/firmware/efi/libstub/file.c
@@ -121,13 +121,13 @@ static int find_file_option(const efi_char16_t *cmdline, int cmdline_len,
  * We only support loading a file from the same filesystem as
  * the kernel image.
  */
-static efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
-					 const efi_char16_t *optstr,
-					 int optstr_size,
-					 unsigned long soft_limit,
-					 unsigned long hard_limit,
-					 unsigned long *load_addr,
-					 unsigned long *load_size)
+efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
+				  const efi_char16_t *optstr,
+				  int optstr_size,
+				  unsigned long soft_limit,
+				  unsigned long hard_limit,
+				  unsigned long *load_addr,
+				  unsigned long *load_size)
 {
 	const efi_char16_t *cmdline = image->load_options;
 	int cmdline_len = image->load_options_size / 2;
@@ -142,7 +142,7 @@ static efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
 	if (!load_addr || !load_size)
 		return EFI_INVALID_PARAMETER;
 
-	if (IS_ENABLED(CONFIG_X86) && !nochunk())
+	if (IS_ENABLED(CONFIG_X86) && !efi_nochunk)
 		efi_chunk_size = EFI_READ_CHUNK_SIZE;
 
 	alloc_addr = alloc_size = 0;
@@ -239,21 +239,3 @@ static efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
 	efi_free(alloc_size, alloc_addr);
 	return status;
 }
-
-efi_status_t efi_load_dtb(efi_loaded_image_t *image,
-			  unsigned long *load_addr,
-			  unsigned long *load_size)
-{
-	return handle_cmdline_files(image, L"dtb=", sizeof(L"dtb=") - 2,
-				    ULONG_MAX, ULONG_MAX, load_addr, load_size);
-}
-
-efi_status_t efi_load_initrd(efi_loaded_image_t *image,
-			     unsigned long *load_addr,
-			     unsigned long *load_size,
-			     unsigned long soft_limit,
-			     unsigned long hard_limit)
-{
-	return handle_cmdline_files(image, L"initrd=", sizeof(L"initrd=") - 2,
-				    soft_limit, hard_limit, load_addr, load_size);
-}
diff --git a/drivers/firmware/efi/libstub/gop.c b/drivers/firmware/efi/libstub/gop.c
index 55e6b3f286fe..216327d0b034 100644
--- a/drivers/firmware/efi/libstub/gop.c
+++ b/drivers/firmware/efi/libstub/gop.c
@@ -5,169 +5,453 @@
  *
  * ----------------------------------------------------------------------- */
 
+#include <linux/bitops.h>
+#include <linux/ctype.h>
 #include <linux/efi.h>
 #include <linux/screen_info.h>
+#include <linux/string.h>
 #include <asm/efi.h>
 #include <asm/setup.h>
 
 #include "efistub.h"
 
-static void find_bits(unsigned long mask, u8 *pos, u8 *size)
+enum efi_cmdline_option {
+	EFI_CMDLINE_NONE,
+	EFI_CMDLINE_MODE_NUM,
+	EFI_CMDLINE_RES,
+	EFI_CMDLINE_AUTO
+};
+
+static struct {
+	enum efi_cmdline_option option;
+	union {
+		u32 mode;
+		struct {
+			u32 width, height;
+			int format;
+			u8 depth;
+		} res;
+	};
+} cmdline = { .option = EFI_CMDLINE_NONE };
+
+static bool parse_modenum(char *option, char **next)
 {
-	u8 first, len;
+	u32 m;
 
-	first = 0;
-	len = 0;
+	if (!strstarts(option, "mode="))
+		return false;
+	option += strlen("mode=");
+	m = simple_strtoull(option, &option, 0);
+	if (*option && *option++ != ',')
+		return false;
+	cmdline.option = EFI_CMDLINE_MODE_NUM;
+	cmdline.mode   = m;
 
-	if (mask) {
-		while (!(mask & 0x1)) {
-			mask = mask >> 1;
-			first++;
-		}
+	*next = option;
+	return true;
+}
+
+static bool parse_res(char *option, char **next)
+{
+	u32 w, h, d = 0;
+	int pf = -1;
+
+	if (!isdigit(*option))
+		return false;
+	w = simple_strtoull(option, &option, 10);
+	if (*option++ != 'x' || !isdigit(*option))
+		return false;
+	h = simple_strtoull(option, &option, 10);
+	if (*option == '-') {
+		option++;
+		if (strstarts(option, "rgb")) {
+			option += strlen("rgb");
+			pf = PIXEL_RGB_RESERVED_8BIT_PER_COLOR;
+		} else if (strstarts(option, "bgr")) {
+			option += strlen("bgr");
+			pf = PIXEL_BGR_RESERVED_8BIT_PER_COLOR;
+		} else if (isdigit(*option))
+			d = simple_strtoull(option, &option, 10);
+		else
+			return false;
+	}
+	if (*option && *option++ != ',')
+		return false;
+	cmdline.option     = EFI_CMDLINE_RES;
+	cmdline.res.width  = w;
+	cmdline.res.height = h;
+	cmdline.res.format = pf;
+	cmdline.res.depth  = d;
+
+	*next = option;
+	return true;
+}
+
+static bool parse_auto(char *option, char **next)
+{
+	if (!strstarts(option, "auto"))
+		return false;
+	option += strlen("auto");
+	if (*option && *option++ != ',')
+		return false;
+	cmdline.option = EFI_CMDLINE_AUTO;
+
+	*next = option;
+	return true;
+}
+
+void efi_parse_option_graphics(char *option)
+{
+	while (*option) {
+		if (parse_modenum(option, &option))
+			continue;
+		if (parse_res(option, &option))
+			continue;
+		if (parse_auto(option, &option))
+			continue;
+
+		while (*option && *option++ != ',')
+			;
+	}
+}
+
+static u32 choose_mode_modenum(efi_graphics_output_protocol_t *gop)
+{
+	efi_status_t status;
+
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+	unsigned long info_size;
+
+	u32 max_mode, cur_mode;
+	int pf;
+
+	mode = efi_table_attr(gop, mode);
+
+	cur_mode = efi_table_attr(mode, mode);
+	if (cmdline.mode == cur_mode)
+		return cur_mode;
+
+	max_mode = efi_table_attr(mode, max_mode);
+	if (cmdline.mode >= max_mode) {
+		efi_printk("Requested mode is invalid\n");
+		return cur_mode;
+	}
+
+	status = efi_call_proto(gop, query_mode, cmdline.mode,
+				&info_size, &info);
+	if (status != EFI_SUCCESS) {
+		efi_printk("Couldn't get mode information\n");
+		return cur_mode;
+	}
+
+	pf = info->pixel_format;
+
+	efi_bs_call(free_pool, info);
+
+	if (pf == PIXEL_BLT_ONLY || pf >= PIXEL_FORMAT_MAX) {
+		efi_printk("Invalid PixelFormat\n");
+		return cur_mode;
+	}
+
+	return cmdline.mode;
+}
+
+static u8 pixel_bpp(int pixel_format, efi_pixel_bitmask_t pixel_info)
+{
+	if (pixel_format == PIXEL_BIT_MASK) {
+		u32 mask = pixel_info.red_mask | pixel_info.green_mask |
+			   pixel_info.blue_mask | pixel_info.reserved_mask;
+		if (!mask)
+			return 0;
+		return __fls(mask) - __ffs(mask) + 1;
+	} else
+		return 32;
+}
+
+static u32 choose_mode_res(efi_graphics_output_protocol_t *gop)
+{
+	efi_status_t status;
+
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+	unsigned long info_size;
+
+	u32 max_mode, cur_mode;
+	int pf;
+	efi_pixel_bitmask_t pi;
+	u32 m, w, h;
+
+	mode = efi_table_attr(gop, mode);
+
+	cur_mode = efi_table_attr(mode, mode);
+	info = efi_table_attr(mode, info);
+	pf = info->pixel_format;
+	pi = info->pixel_information;
+	w  = info->horizontal_resolution;
+	h  = info->vertical_resolution;
+
+	if (w == cmdline.res.width && h == cmdline.res.height &&
+	    (cmdline.res.format < 0 || cmdline.res.format == pf) &&
+	    (!cmdline.res.depth || cmdline.res.depth == pixel_bpp(pf, pi)))
+		return cur_mode;
+
+	max_mode = efi_table_attr(mode, max_mode);
+
+	for (m = 0; m < max_mode; m++) {
+		if (m == cur_mode)
+			continue;
+
+		status = efi_call_proto(gop, query_mode, m,
+					&info_size, &info);
+		if (status != EFI_SUCCESS)
+			continue;
+
+		pf = info->pixel_format;
+		pi = info->pixel_information;
+		w  = info->horizontal_resolution;
+		h  = info->vertical_resolution;
+
+		efi_bs_call(free_pool, info);
+
+		if (pf == PIXEL_BLT_ONLY || pf >= PIXEL_FORMAT_MAX)
+			continue;
+		if (w == cmdline.res.width && h == cmdline.res.height &&
+		    (cmdline.res.format < 0 || cmdline.res.format == pf) &&
+		    (!cmdline.res.depth || cmdline.res.depth == pixel_bpp(pf, pi)))
+			return m;
+	}
+
+	efi_printk("Couldn't find requested mode\n");
+
+	return cur_mode;
+}
+
+static u32 choose_mode_auto(efi_graphics_output_protocol_t *gop)
+{
+	efi_status_t status;
+
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+	unsigned long info_size;
+
+	u32 max_mode, cur_mode, best_mode, area;
+	u8 depth;
+	int pf;
+	efi_pixel_bitmask_t pi;
+	u32 m, w, h, a;
+	u8 d;
+
+	mode = efi_table_attr(gop, mode);
+
+	cur_mode = efi_table_attr(mode, mode);
+	max_mode = efi_table_attr(mode, max_mode);
 
-		while (mask & 0x1) {
-			mask = mask >> 1;
-			len++;
+	info = efi_table_attr(mode, info);
+
+	pf = info->pixel_format;
+	pi = info->pixel_information;
+	w  = info->horizontal_resolution;
+	h  = info->vertical_resolution;
+
+	best_mode = cur_mode;
+	area = w * h;
+	depth = pixel_bpp(pf, pi);
+
+	for (m = 0; m < max_mode; m++) {
+		if (m == cur_mode)
+			continue;
+
+		status = efi_call_proto(gop, query_mode, m,
+					&info_size, &info);
+		if (status != EFI_SUCCESS)
+			continue;
+
+		pf = info->pixel_format;
+		pi = info->pixel_information;
+		w  = info->horizontal_resolution;
+		h  = info->vertical_resolution;
+
+		efi_bs_call(free_pool, info);
+
+		if (pf == PIXEL_BLT_ONLY || pf >= PIXEL_FORMAT_MAX)
+			continue;
+		a = w * h;
+		if (a < area)
+			continue;
+		d = pixel_bpp(pf, pi);
+		if (a > area || d > depth) {
+			best_mode = m;
+			area = a;
+			depth = d;
 		}
 	}
 
-	*pos = first;
-	*size = len;
+	return best_mode;
+}
+
+static void set_mode(efi_graphics_output_protocol_t *gop)
+{
+	efi_graphics_output_protocol_mode_t *mode;
+	u32 cur_mode, new_mode;
+
+	switch (cmdline.option) {
+	case EFI_CMDLINE_MODE_NUM:
+		new_mode = choose_mode_modenum(gop);
+		break;
+	case EFI_CMDLINE_RES:
+		new_mode = choose_mode_res(gop);
+		break;
+	case EFI_CMDLINE_AUTO:
+		new_mode = choose_mode_auto(gop);
+		break;
+	default:
+		return;
+	}
+
+	mode = efi_table_attr(gop, mode);
+	cur_mode = efi_table_attr(mode, mode);
+
+	if (new_mode == cur_mode)
+		return;
+
+	if (efi_call_proto(gop, set_mode, new_mode) != EFI_SUCCESS)
+		efi_printk("Failed to set requested mode\n");
+}
+
+static void find_bits(u32 mask, u8 *pos, u8 *size)
+{
+	if (!mask) {
+		*pos = *size = 0;
+		return;
+	}
+
+	/* UEFI spec guarantees that the set bits are contiguous */
+	*pos  = __ffs(mask);
+	*size = __fls(mask) - *pos + 1;
 }
 
 static void
 setup_pixel_info(struct screen_info *si, u32 pixels_per_scan_line,
 		 efi_pixel_bitmask_t pixel_info, int pixel_format)
 {
-	if (pixel_format == PIXEL_RGB_RESERVED_8BIT_PER_COLOR) {
-		si->lfb_depth = 32;
-		si->lfb_linelength = pixels_per_scan_line * 4;
-		si->red_size = 8;
-		si->red_pos = 0;
-		si->green_size = 8;
-		si->green_pos = 8;
-		si->blue_size = 8;
-		si->blue_pos = 16;
-		si->rsvd_size = 8;
-		si->rsvd_pos = 24;
-	} else if (pixel_format == PIXEL_BGR_RESERVED_8BIT_PER_COLOR) {
-		si->lfb_depth = 32;
-		si->lfb_linelength = pixels_per_scan_line * 4;
-		si->red_size = 8;
-		si->red_pos = 16;
-		si->green_size = 8;
-		si->green_pos = 8;
-		si->blue_size = 8;
-		si->blue_pos = 0;
-		si->rsvd_size = 8;
-		si->rsvd_pos = 24;
-	} else if (pixel_format == PIXEL_BIT_MASK) {
-		find_bits(pixel_info.red_mask, &si->red_pos, &si->red_size);
-		find_bits(pixel_info.green_mask, &si->green_pos,
-			  &si->green_size);
-		find_bits(pixel_info.blue_mask, &si->blue_pos, &si->blue_size);
-		find_bits(pixel_info.reserved_mask, &si->rsvd_pos,
-			  &si->rsvd_size);
+	if (pixel_format == PIXEL_BIT_MASK) {
+		find_bits(pixel_info.red_mask,
+			  &si->red_pos, &si->red_size);
+		find_bits(pixel_info.green_mask,
+			  &si->green_pos, &si->green_size);
+		find_bits(pixel_info.blue_mask,
+			  &si->blue_pos, &si->blue_size);
+		find_bits(pixel_info.reserved_mask,
+			  &si->rsvd_pos, &si->rsvd_size);
 		si->lfb_depth = si->red_size + si->green_size +
 			si->blue_size + si->rsvd_size;
 		si->lfb_linelength = (pixels_per_scan_line * si->lfb_depth) / 8;
 	} else {
-		si->lfb_depth = 4;
-		si->lfb_linelength = si->lfb_width / 2;
-		si->red_size = 0;
-		si->red_pos = 0;
-		si->green_size = 0;
-		si->green_pos = 0;
-		si->blue_size = 0;
-		si->blue_pos = 0;
-		si->rsvd_size = 0;
-		si->rsvd_pos = 0;
+		if (pixel_format == PIXEL_RGB_RESERVED_8BIT_PER_COLOR) {
+			si->red_pos   = 0;
+			si->blue_pos  = 16;
+		} else /* PIXEL_BGR_RESERVED_8BIT_PER_COLOR */ {
+			si->blue_pos  = 0;
+			si->red_pos   = 16;
+		}
+
+		si->green_pos = 8;
+		si->rsvd_pos  = 24;
+		si->red_size = si->green_size =
+			si->blue_size = si->rsvd_size = 8;
+
+		si->lfb_depth = 32;
+		si->lfb_linelength = pixels_per_scan_line * 4;
 	}
 }
 
-static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
-			      unsigned long size, void **handles)
+static efi_graphics_output_protocol_t *
+find_gop(efi_guid_t *proto, unsigned long size, void **handles)
 {
-	efi_graphics_output_protocol_t *gop, *first_gop;
-	u16 width, height;
-	u32 pixels_per_scan_line;
-	u32 ext_lfb_base;
-	efi_physical_addr_t fb_base;
-	efi_pixel_bitmask_t pixel_info;
-	int pixel_format;
-	efi_status_t status;
+	efi_graphics_output_protocol_t *first_gop;
 	efi_handle_t h;
 	int i;
 
 	first_gop = NULL;
-	gop = NULL;
 
 	for_each_efi_handle(h, handles, size, i) {
+		efi_status_t status;
+
+		efi_graphics_output_protocol_t *gop;
 		efi_graphics_output_protocol_mode_t *mode;
-		efi_graphics_output_mode_info_t *info = NULL;
+		efi_graphics_output_mode_info_t *info;
+
 		efi_guid_t conout_proto = EFI_CONSOLE_OUT_DEVICE_GUID;
-		bool conout_found = false;
 		void *dummy = NULL;
-		efi_physical_addr_t current_fb_base;
 
 		status = efi_bs_call(handle_protocol, h, proto, (void **)&gop);
 		if (status != EFI_SUCCESS)
 			continue;
 
+		mode = efi_table_attr(gop, mode);
+		info = efi_table_attr(mode, info);
+		if (info->pixel_format == PIXEL_BLT_ONLY ||
+		    info->pixel_format >= PIXEL_FORMAT_MAX)
+			continue;
+
+		/*
+		 * Systems that use the UEFI Console Splitter may
+		 * provide multiple GOP devices, not all of which are
+		 * backed by real hardware. The workaround is to search
+		 * for a GOP implementing the ConOut protocol, and if
+		 * one isn't found, to just fall back to the first GOP.
+		 *
+		 * Once we've found a GOP supporting ConOut,
+		 * don't bother looking any further.
+		 */
 		status = efi_bs_call(handle_protocol, h, &conout_proto, &dummy);
 		if (status == EFI_SUCCESS)
-			conout_found = true;
+			return gop;
 
-		mode = efi_table_attr(gop, mode);
-		info = efi_table_attr(mode, info);
-		current_fb_base = efi_table_attr(mode, frame_buffer_base);
-
-		if ((!first_gop || conout_found) &&
-		    info->pixel_format != PIXEL_BLT_ONLY) {
-			/*
-			 * Systems that use the UEFI Console Splitter may
-			 * provide multiple GOP devices, not all of which are
-			 * backed by real hardware. The workaround is to search
-			 * for a GOP implementing the ConOut protocol, and if
-			 * one isn't found, to just fall back to the first GOP.
-			 */
-			width = info->horizontal_resolution;
-			height = info->vertical_resolution;
-			pixel_format = info->pixel_format;
-			pixel_info = info->pixel_information;
-			pixels_per_scan_line = info->pixels_per_scan_line;
-			fb_base = current_fb_base;
-
-			/*
-			 * Once we've found a GOP supporting ConOut,
-			 * don't bother looking any further.
-			 */
+		if (!first_gop)
 			first_gop = gop;
-			if (conout_found)
-				break;
-		}
 	}
 
+	return first_gop;
+}
+
+static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
+			      unsigned long size, void **handles)
+{
+	efi_graphics_output_protocol_t *gop;
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+	efi_physical_addr_t fb_base;
+
+	gop = find_gop(proto, size, handles);
+
 	/* Did we find any GOPs? */
-	if (!first_gop)
+	if (!gop)
 		return EFI_NOT_FOUND;
 
+	/* Change mode if requested */
+	set_mode(gop);
+
 	/* EFI framebuffer */
+	mode = efi_table_attr(gop, mode);
+	info = efi_table_attr(mode, info);
+
 	si->orig_video_isVGA = VIDEO_TYPE_EFI;
 
-	si->lfb_width = width;
-	si->lfb_height = height;
-	si->lfb_base = fb_base;
+	si->lfb_width  = info->horizontal_resolution;
+	si->lfb_height = info->vertical_resolution;
 
-	ext_lfb_base = (u64)(unsigned long)fb_base >> 32;
-	if (ext_lfb_base) {
+	fb_base		 = efi_table_attr(mode, frame_buffer_base);
+	si->lfb_base	 = lower_32_bits(fb_base);
+	si->ext_lfb_base = upper_32_bits(fb_base);
+	if (si->ext_lfb_base)
 		si->capabilities |= VIDEO_CAPABILITY_64BIT_BASE;
-		si->ext_lfb_base = ext_lfb_base;
-	}
 
 	si->pages = 1;
 
-	setup_pixel_info(si, pixels_per_scan_line, pixel_info, pixel_format);
+	setup_pixel_info(si, info->pixels_per_scan_line,
+			     info->pixel_information, info->pixel_format);
 
 	si->lfb_size = si->lfb_linelength * si->lfb_height;
 
diff --git a/drivers/firmware/efi/libstub/mem.c b/drivers/firmware/efi/libstub/mem.c
index 869a79c8946f..6e0ee6b3d897 100644
--- a/drivers/firmware/efi/libstub/mem.c
+++ b/drivers/firmware/efi/libstub/mem.c
@@ -93,120 +93,23 @@ efi_status_t efi_get_memory_map(struct efi_boot_memmap *map)
 efi_status_t efi_allocate_pages(unsigned long size, unsigned long *addr,
 				unsigned long max)
 {
-	efi_physical_addr_t alloc_addr = ALIGN_DOWN(max + 1, EFI_ALLOC_ALIGN) - 1;
-	int slack = EFI_ALLOC_ALIGN / EFI_PAGE_SIZE - 1;
+	efi_physical_addr_t alloc_addr;
 	efi_status_t status;
 
-	size = round_up(size, EFI_ALLOC_ALIGN);
+	if (EFI_ALLOC_ALIGN > EFI_PAGE_SIZE)
+		return efi_allocate_pages_aligned(size, addr, max,
+						  EFI_ALLOC_ALIGN);
+
+	alloc_addr = ALIGN_DOWN(max + 1, EFI_ALLOC_ALIGN) - 1;
 	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_MAX_ADDRESS,
-			     EFI_LOADER_DATA, size / EFI_PAGE_SIZE + slack,
+			     EFI_LOADER_DATA, DIV_ROUND_UP(size, EFI_PAGE_SIZE),
 			     &alloc_addr);
 	if (status != EFI_SUCCESS)
 		return status;
 
-	*addr = ALIGN((unsigned long)alloc_addr, EFI_ALLOC_ALIGN);
-
-	if (slack > 0) {
-		int l = (alloc_addr % EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
-
-		if (l) {
-			efi_bs_call(free_pages, alloc_addr, slack - l + 1);
-			slack = l - 1;
-		}
-		if (slack)
-			efi_bs_call(free_pages, *addr + size, slack);
-	}
+	*addr = alloc_addr;
 	return EFI_SUCCESS;
 }
-/**
- * efi_low_alloc_above() - allocate pages at or above given address
- * @size:	size of the memory area to allocate
- * @align:	minimum alignment of the allocated memory area. It should
- *		a power of two.
- * @addr:	on exit the address of the allocated memory
- * @min:	minimum address to used for the memory allocation
- *
- * Allocate at the lowest possible address that is not below @min as
- * EFI_LOADER_DATA. The allocated pages are aligned according to @align but at
- * least EFI_ALLOC_ALIGN. The first allocated page will not below the address
- * given by @min.
- *
- * Return:	status code
- */
-efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
-				 unsigned long *addr, unsigned long min)
-{
-	unsigned long map_size, desc_size, buff_size;
-	efi_memory_desc_t *map;
-	efi_status_t status;
-	unsigned long nr_pages;
-	int i;
-	struct efi_boot_memmap boot_map;
-
-	boot_map.map		= &map;
-	boot_map.map_size	= &map_size;
-	boot_map.desc_size	= &desc_size;
-	boot_map.desc_ver	= NULL;
-	boot_map.key_ptr	= NULL;
-	boot_map.buff_size	= &buff_size;
-
-	status = efi_get_memory_map(&boot_map);
-	if (status != EFI_SUCCESS)
-		goto fail;
-
-	/*
-	 * Enforce minimum alignment that EFI or Linux requires when
-	 * requesting a specific address.  We are doing page-based (or
-	 * larger) allocations, and both the address and size must meet
-	 * alignment constraints.
-	 */
-	if (align < EFI_ALLOC_ALIGN)
-		align = EFI_ALLOC_ALIGN;
-
-	size = round_up(size, EFI_ALLOC_ALIGN);
-	nr_pages = size / EFI_PAGE_SIZE;
-	for (i = 0; i < map_size / desc_size; i++) {
-		efi_memory_desc_t *desc;
-		unsigned long m = (unsigned long)map;
-		u64 start, end;
-
-		desc = efi_early_memdesc_ptr(m, desc_size, i);
-
-		if (desc->type != EFI_CONVENTIONAL_MEMORY)
-			continue;
-
-		if (efi_soft_reserve_enabled() &&
-		    (desc->attribute & EFI_MEMORY_SP))
-			continue;
-
-		if (desc->num_pages < nr_pages)
-			continue;
-
-		start = desc->phys_addr;
-		end = start + desc->num_pages * EFI_PAGE_SIZE;
-
-		if (start < min)
-			start = min;
-
-		start = round_up(start, align);
-		if ((start + size) > end)
-			continue;
-
-		status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
-				     EFI_LOADER_DATA, nr_pages, &start);
-		if (status == EFI_SUCCESS) {
-			*addr = start;
-			break;
-		}
-	}
-
-	if (i == map_size / desc_size)
-		status = EFI_NOT_FOUND;
-
-	efi_bs_call(free_pool, map);
-fail:
-	return status;
-}
 
 /**
  * efi_free() - free memory pages
@@ -229,81 +132,3 @@ void efi_free(unsigned long size, unsigned long addr)
 	nr_pages = round_up(size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
 	efi_bs_call(free_pages, addr, nr_pages);
 }
-
-/**
- * efi_relocate_kernel() - copy memory area
- * @image_addr:		pointer to address of memory area to copy
- * @image_size:		size of memory area to copy
- * @alloc_size:		minimum size of memory to allocate, must be greater or
- *			equal to image_size
- * @preferred_addr:	preferred target address
- * @alignment:		minimum alignment of the allocated memory area. It
- *			should be a power of two.
- * @min_addr:		minimum target address
- *
- * Copy a memory area to a newly allocated memory area aligned according
- * to @alignment but at least EFI_ALLOC_ALIGN. If the preferred address
- * is not available, the allocated address will not be below @min_addr.
- * On exit, @image_addr is updated to the target copy address that was used.
- *
- * This function is used to copy the Linux kernel verbatim. It does not apply
- * any relocation changes.
- *
- * Return:		status code
- */
-efi_status_t efi_relocate_kernel(unsigned long *image_addr,
-				 unsigned long image_size,
-				 unsigned long alloc_size,
-				 unsigned long preferred_addr,
-				 unsigned long alignment,
-				 unsigned long min_addr)
-{
-	unsigned long cur_image_addr;
-	unsigned long new_addr = 0;
-	efi_status_t status;
-	unsigned long nr_pages;
-	efi_physical_addr_t efi_addr = preferred_addr;
-
-	if (!image_addr || !image_size || !alloc_size)
-		return EFI_INVALID_PARAMETER;
-	if (alloc_size < image_size)
-		return EFI_INVALID_PARAMETER;
-
-	cur_image_addr = *image_addr;
-
-	/*
-	 * The EFI firmware loader could have placed the kernel image
-	 * anywhere in memory, but the kernel has restrictions on the
-	 * max physical address it can run at.  Some architectures
-	 * also have a prefered address, so first try to relocate
-	 * to the preferred address.  If that fails, allocate as low
-	 * as possible while respecting the required alignment.
-	 */
-	nr_pages = round_up(alloc_size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
-	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
-			     EFI_LOADER_DATA, nr_pages, &efi_addr);
-	new_addr = efi_addr;
-	/*
-	 * If preferred address allocation failed allocate as low as
-	 * possible.
-	 */
-	if (status != EFI_SUCCESS) {
-		status = efi_low_alloc_above(alloc_size, alignment, &new_addr,
-					     min_addr);
-	}
-	if (status != EFI_SUCCESS) {
-		pr_efi_err("Failed to allocate usable memory for kernel.\n");
-		return status;
-	}
-
-	/*
-	 * We know source/dest won't overlap since both memory ranges
-	 * have been allocated by UEFI, so we can safely use memcpy.
-	 */
-	memcpy((void *)new_addr, (void *)cur_image_addr, image_size);
-
-	/* Return the new address of the relocated image. */
-	*image_addr = new_addr;
-
-	return status;
-}
diff --git a/drivers/firmware/efi/libstub/randomalloc.c b/drivers/firmware/efi/libstub/randomalloc.c
index 4578f59e160c..a408df474d83 100644
--- a/drivers/firmware/efi/libstub/randomalloc.c
+++ b/drivers/firmware/efi/libstub/randomalloc.c
@@ -74,6 +74,8 @@ efi_status_t efi_random_alloc(unsigned long size,
 	if (align < EFI_ALLOC_ALIGN)
 		align = EFI_ALLOC_ALIGN;
 
+	size = round_up(size, EFI_ALLOC_ALIGN);
+
 	/* count the suitable slots in each memory map entry */
 	for (map_offset = 0; map_offset < map_size; map_offset += desc_size) {
 		efi_memory_desc_t *md = (void *)memory_map + map_offset;
@@ -85,7 +87,7 @@ efi_status_t efi_random_alloc(unsigned long size,
 	}
 
 	/* find a random number between 0 and total_slots */
-	target_slot = (total_slots * (u16)random_seed) >> 16;
+	target_slot = (total_slots * (u64)(random_seed & U32_MAX)) >> 32;
 
 	/*
 	 * target_slot is now a value in the range [0, total_slots), and so
@@ -109,7 +111,7 @@ efi_status_t efi_random_alloc(unsigned long size,
 		}
 
 		target = round_up(md->phys_addr, align) + target_slot * align;
-		pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
+		pages = size / EFI_PAGE_SIZE;
 
 		status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
 				     EFI_LOADER_DATA, pages, &target);
diff --git a/drivers/firmware/efi/libstub/relocate.c b/drivers/firmware/efi/libstub/relocate.c
new file mode 100644
index 000000000000..1507d3c82884
--- /dev/null
+++ b/drivers/firmware/efi/libstub/relocate.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/**
+ * efi_low_alloc_above() - allocate pages at or above given address
+ * @size:	size of the memory area to allocate
+ * @align:	minimum alignment of the allocated memory area. It should
+ *		a power of two.
+ * @addr:	on exit the address of the allocated memory
+ * @min:	minimum address to used for the memory allocation
+ *
+ * Allocate at the lowest possible address that is not below @min as
+ * EFI_LOADER_DATA. The allocated pages are aligned according to @align but at
+ * least EFI_ALLOC_ALIGN. The first allocated page will not below the address
+ * given by @min.
+ *
+ * Return:	status code
+ */
+static efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
+					unsigned long *addr, unsigned long min)
+{
+	unsigned long map_size, desc_size, buff_size;
+	efi_memory_desc_t *map;
+	efi_status_t status;
+	unsigned long nr_pages;
+	int i;
+	struct efi_boot_memmap boot_map;
+
+	boot_map.map		= &map;
+	boot_map.map_size	= &map_size;
+	boot_map.desc_size	= &desc_size;
+	boot_map.desc_ver	= NULL;
+	boot_map.key_ptr	= NULL;
+	boot_map.buff_size	= &buff_size;
+
+	status = efi_get_memory_map(&boot_map);
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	/*
+	 * Enforce minimum alignment that EFI or Linux requires when
+	 * requesting a specific address.  We are doing page-based (or
+	 * larger) allocations, and both the address and size must meet
+	 * alignment constraints.
+	 */
+	if (align < EFI_ALLOC_ALIGN)
+		align = EFI_ALLOC_ALIGN;
+
+	size = round_up(size, EFI_ALLOC_ALIGN);
+	nr_pages = size / EFI_PAGE_SIZE;
+	for (i = 0; i < map_size / desc_size; i++) {
+		efi_memory_desc_t *desc;
+		unsigned long m = (unsigned long)map;
+		u64 start, end;
+
+		desc = efi_early_memdesc_ptr(m, desc_size, i);
+
+		if (desc->type != EFI_CONVENTIONAL_MEMORY)
+			continue;
+
+		if (efi_soft_reserve_enabled() &&
+		    (desc->attribute & EFI_MEMORY_SP))
+			continue;
+
+		if (desc->num_pages < nr_pages)
+			continue;
+
+		start = desc->phys_addr;
+		end = start + desc->num_pages * EFI_PAGE_SIZE;
+
+		if (start < min)
+			start = min;
+
+		start = round_up(start, align);
+		if ((start + size) > end)
+			continue;
+
+		status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
+				     EFI_LOADER_DATA, nr_pages, &start);
+		if (status == EFI_SUCCESS) {
+			*addr = start;
+			break;
+		}
+	}
+
+	if (i == map_size / desc_size)
+		status = EFI_NOT_FOUND;
+
+	efi_bs_call(free_pool, map);
+fail:
+	return status;
+}
+
+/**
+ * efi_relocate_kernel() - copy memory area
+ * @image_addr:		pointer to address of memory area to copy
+ * @image_size:		size of memory area to copy
+ * @alloc_size:		minimum size of memory to allocate, must be greater or
+ *			equal to image_size
+ * @preferred_addr:	preferred target address
+ * @alignment:		minimum alignment of the allocated memory area. It
+ *			should be a power of two.
+ * @min_addr:		minimum target address
+ *
+ * Copy a memory area to a newly allocated memory area aligned according
+ * to @alignment but at least EFI_ALLOC_ALIGN. If the preferred address
+ * is not available, the allocated address will not be below @min_addr.
+ * On exit, @image_addr is updated to the target copy address that was used.
+ *
+ * This function is used to copy the Linux kernel verbatim. It does not apply
+ * any relocation changes.
+ *
+ * Return:		status code
+ */
+efi_status_t efi_relocate_kernel(unsigned long *image_addr,
+				 unsigned long image_size,
+				 unsigned long alloc_size,
+				 unsigned long preferred_addr,
+				 unsigned long alignment,
+				 unsigned long min_addr)
+{
+	unsigned long cur_image_addr;
+	unsigned long new_addr = 0;
+	efi_status_t status;
+	unsigned long nr_pages;
+	efi_physical_addr_t efi_addr = preferred_addr;
+
+	if (!image_addr || !image_size || !alloc_size)
+		return EFI_INVALID_PARAMETER;
+	if (alloc_size < image_size)
+		return EFI_INVALID_PARAMETER;
+
+	cur_image_addr = *image_addr;
+
+	/*
+	 * The EFI firmware loader could have placed the kernel image
+	 * anywhere in memory, but the kernel has restrictions on the
+	 * max physical address it can run at.  Some architectures
+	 * also have a prefered address, so first try to relocate
+	 * to the preferred address.  If that fails, allocate as low
+	 * as possible while respecting the required alignment.
+	 */
+	nr_pages = round_up(alloc_size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
+	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
+			     EFI_LOADER_DATA, nr_pages, &efi_addr);
+	new_addr = efi_addr;
+	/*
+	 * If preferred address allocation failed allocate as low as
+	 * possible.
+	 */
+	if (status != EFI_SUCCESS) {
+		status = efi_low_alloc_above(alloc_size, alignment, &new_addr,
+					     min_addr);
+	}
+	if (status != EFI_SUCCESS) {
+		pr_efi_err("Failed to allocate usable memory for kernel.\n");
+		return status;
+	}
+
+	/*
+	 * We know source/dest won't overlap since both memory ranges
+	 * have been allocated by UEFI, so we can safely use memcpy.
+	 */
+	memcpy((void *)new_addr, (void *)cur_image_addr, image_size);
+
+	/* Return the new address of the relocated image. */
+	*image_addr = new_addr;
+
+	return status;
+}
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 05ccb229fb45..597793fe8d22 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -20,22 +20,9 @@
 /* Maximum physical address for 64-bit kernel with 4-level paging */
 #define MAXMEM_X86_64_4LEVEL (1ull << 46)
 
-static efi_system_table_t *sys_table __efistub_global;
-extern const bool efi_is64;
+const efi_system_table_t *efi_system_table;
 extern u32 image_offset;
 
-__pure efi_system_table_t *efi_system_table(void)
-{
-	return sys_table;
-}
-
-__attribute_const__ bool efi_is_64bit(void)
-{
-	if (IS_ENABLED(CONFIG_EFI_MIXED))
-		return efi_is64;
-	return IS_ENABLED(CONFIG_X86_64);
-}
-
 static efi_status_t
 preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
 {
@@ -227,7 +214,7 @@ static const efi_char16_t apple[] = L"Apple";
 static void setup_quirks(struct boot_params *boot_params)
 {
 	efi_char16_t *fw_vendor = (efi_char16_t *)(unsigned long)
-		efi_table_attr(efi_system_table(), fw_vendor);
+		efi_table_attr(efi_system_table, fw_vendor);
 
 	if (!memcmp(fw_vendor, apple, sizeof(apple))) {
 		if (IS_ENABLED(CONFIG_APPLE_PROPERTIES))
@@ -377,10 +364,10 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 	unsigned long ramdisk_addr;
 	unsigned long ramdisk_size;
 
-	sys_table = sys_table_arg;
+	efi_system_table = sys_table_arg;
 
 	/* Check if we were booted by the EFI firmware */
-	if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
+	if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
 		efi_exit(handle, EFI_INVALID_PARAMETER);
 
 	status = efi_bs_call(handle_protocol, handle, &proto, (void **)&image);
@@ -432,7 +419,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 		if (status != EFI_SUCCESS)
 			goto fail2;
 
-		if (!noinitrd()) {
+		if (!efi_noinitrd) {
 			status = efi_load_initrd(image, &ramdisk_addr,
 						 &ramdisk_size,
 						 hdr->initrd_addr_max,
@@ -446,7 +433,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 		}
 	}
 
-	efi_stub_entry(handle, sys_table, boot_params);
+	efi_stub_entry(handle, sys_table_arg, boot_params);
 	/* not reached */
 
 fail2:
@@ -651,14 +638,14 @@ static efi_status_t exit_boot_func(struct efi_boot_memmap *map,
 				   : EFI32_LOADER_SIGNATURE;
 	memcpy(&p->efi->efi_loader_signature, signature, sizeof(__u32));
 
-	p->efi->efi_systab		= (unsigned long)efi_system_table();
+	p->efi->efi_systab		= (unsigned long)efi_system_table;
 	p->efi->efi_memdesc_size	= *map->desc_size;
 	p->efi->efi_memdesc_version	= *map->desc_ver;
 	p->efi->efi_memmap		= (unsigned long)*map->map;
 	p->efi->efi_memmap_size		= *map->map_size;
 
 #ifdef CONFIG_X86_64
-	p->efi->efi_systab_hi		= (unsigned long)efi_system_table() >> 32;
+	p->efi->efi_systab_hi		= (unsigned long)efi_system_table >> 32;
 	p->efi->efi_memmap_hi		= (unsigned long)*map->map >> 32;
 #endif
 
@@ -719,10 +706,10 @@ unsigned long efi_main(efi_handle_t handle,
 	efi_status_t status;
 	unsigned long cmdline_paddr;
 
-	sys_table = sys_table_arg;
+	efi_system_table = sys_table_arg;
 
 	/* Check if we were booted by the EFI firmware */
-	if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
+	if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
 		efi_exit(handle, EFI_INVALID_PARAMETER);
 
 	/*
@@ -792,7 +779,7 @@ unsigned long efi_main(efi_handle_t handle,
 	 * permit an initrd loaded from the LINUX_EFI_INITRD_MEDIA_GUID device
 	 * path to supersede it.
 	 */
-	if (!noinitrd()) {
+	if (!efi_noinitrd) {
 		unsigned long addr, size;
 
 		status = efi_load_initrd_dev_path(&addr, &size, ULONG_MAX);
diff --git a/drivers/firmware/google/memconsole-coreboot.c b/drivers/firmware/google/memconsole-coreboot.c
index fd7f0fbec07e..d17e4d6ac9bc 100644
--- a/drivers/firmware/google/memconsole-coreboot.c
+++ b/drivers/firmware/google/memconsole-coreboot.c
@@ -21,7 +21,7 @@
 struct cbmem_cons {
 	u32 size_dont_access_after_boot;
 	u32 cursor;
-	u8  body[0];
+	u8  body[];
 } __packed;
 
 #define CURSOR_MASK ((1 << 28) - 1)
diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c
index db0812263d46..d23c5c69ab52 100644
--- a/drivers/firmware/google/vpd.c
+++ b/drivers/firmware/google/vpd.c
@@ -32,7 +32,7 @@ struct vpd_cbmem {
 	u32 version;
 	u32 ro_size;
 	u32 rw_size;
-	u8  blob[0];
+	u8  blob[];
 };
 
 struct vpd_section {
diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
index f71eaa5bf52d..b3da2e193ad2 100644
--- a/drivers/firmware/imx/imx-scu.c
+++ b/drivers/firmware/imx/imx-scu.c
@@ -38,6 +38,7 @@ struct imx_sc_ipc {
 	struct device *dev;
 	struct mutex lock;
 	struct completion done;
+	bool fast_ipc;
 
 	/* temporarily store the SCU msg */
 	u32 *msg;
@@ -115,6 +116,7 @@ static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
 	struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc;
 	struct imx_sc_rpc_msg *hdr;
 	u32 *data = msg;
+	int i;
 
 	if (!sc_ipc->msg) {
 		dev_warn(sc_ipc->dev, "unexpected rx idx %d 0x%08x, ignore!\n",
@@ -122,6 +124,19 @@ static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
 		return;
 	}
 
+	if (sc_ipc->fast_ipc) {
+		hdr = msg;
+		sc_ipc->rx_size = hdr->size;
+		sc_ipc->msg[0] = *data++;
+
+		for (i = 1; i < sc_ipc->rx_size; i++)
+			sc_ipc->msg[i] = *data++;
+
+		complete(&sc_ipc->done);
+
+		return;
+	}
+
 	if (sc_chan->idx == 0) {
 		hdr = msg;
 		sc_ipc->rx_size = hdr->size;
@@ -143,20 +158,22 @@ static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
 
 static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
 {
-	struct imx_sc_rpc_msg *hdr = msg;
+	struct imx_sc_rpc_msg hdr = *(struct imx_sc_rpc_msg *)msg;
 	struct imx_sc_chan *sc_chan;
 	u32 *data = msg;
 	int ret;
+	int size;
 	int i;
 
 	/* Check size */
-	if (hdr->size > IMX_SC_RPC_MAX_MSG)
+	if (hdr.size > IMX_SC_RPC_MAX_MSG)
 		return -EINVAL;
 
-	dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr->svc,
-		hdr->func, hdr->size);
+	dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr.svc,
+		hdr.func, hdr.size);
 
-	for (i = 0; i < hdr->size; i++) {
+	size = sc_ipc->fast_ipc ? 1 : hdr.size;
+	for (i = 0; i < size; i++) {
 		sc_chan = &sc_ipc->chans[i % 4];
 
 		/*
@@ -168,8 +185,10 @@ static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
 		 * Wait for tx_done before every send to ensure that no
 		 * queueing happens at the mailbox channel level.
 		 */
-		wait_for_completion(&sc_chan->tx_done);
-		reinit_completion(&sc_chan->tx_done);
+		if (!sc_ipc->fast_ipc) {
+			wait_for_completion(&sc_chan->tx_done);
+			reinit_completion(&sc_chan->tx_done);
+		}
 
 		ret = mbox_send_message(sc_chan->ch, &data[i]);
 		if (ret < 0)
@@ -246,6 +265,8 @@ static int imx_scu_probe(struct platform_device *pdev)
 	struct imx_sc_chan *sc_chan;
 	struct mbox_client *cl;
 	char *chan_name;
+	struct of_phandle_args args;
+	int num_channel;
 	int ret;
 	int i;
 
@@ -253,11 +274,20 @@ static int imx_scu_probe(struct platform_device *pdev)
 	if (!sc_ipc)
 		return -ENOMEM;
 
-	for (i = 0; i < SCU_MU_CHAN_NUM; i++) {
-		if (i < 4)
+	ret = of_parse_phandle_with_args(pdev->dev.of_node, "mboxes",
+					 "#mbox-cells", 0, &args);
+	if (ret)
+		return ret;
+
+	sc_ipc->fast_ipc = of_device_is_compatible(args.np, "fsl,imx8-mu-scu");
+
+	num_channel = sc_ipc->fast_ipc ? 2 : SCU_MU_CHAN_NUM;
+	for (i = 0; i < num_channel; i++) {
+		if (i < num_channel / 2)
 			chan_name = kasprintf(GFP_KERNEL, "tx%d", i);
 		else
-			chan_name = kasprintf(GFP_KERNEL, "rx%d", i - 4);
+			chan_name = kasprintf(GFP_KERNEL, "rx%d",
+					      i - num_channel / 2);
 
 		if (!chan_name)
 			return -ENOMEM;
@@ -269,13 +299,15 @@ static int imx_scu_probe(struct platform_device *pdev)
 		cl->knows_txdone = true;
 		cl->rx_callback = imx_scu_rx_callback;
 
-		/* Initial tx_done completion as "done" */
-		cl->tx_done = imx_scu_tx_done;
-		init_completion(&sc_chan->tx_done);
-		complete(&sc_chan->tx_done);
+		if (!sc_ipc->fast_ipc) {
+			/* Initial tx_done completion as "done" */
+			cl->tx_done = imx_scu_tx_done;
+			init_completion(&sc_chan->tx_done);
+			complete(&sc_chan->tx_done);
+		}
 
 		sc_chan->sc_ipc = sc_ipc;
-		sc_chan->idx = i % 4;
+		sc_chan->idx = i % (num_channel / 2);
 		sc_chan->ch = mbox_request_channel_byname(cl, chan_name);
 		if (IS_ERR(sc_chan->ch)) {
 			ret = PTR_ERR(sc_chan->ch);
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 96758b71a8db..7127a04bca19 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -104,7 +104,7 @@ struct ibft_control {
 	u16 tgt0_off;
 	u16 nic1_off;
 	u16 tgt1_off;
-	u16 expansion[0];
+	u16 expansion[];
 } __attribute__((__packed__));
 
 struct ibft_initiator {
diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
index ce75d1da9e84..e02540571c52 100644
--- a/drivers/firmware/pcdp.h
+++ b/drivers/firmware/pcdp.h
@@ -103,6 +103,6 @@ struct pcdp {
 	u8			creator_id[4];
 	u32			creator_rev;
 	u32			num_uarts;
-	struct pcdp_uart	uart[0];	/* actual size is num_uarts */
+	struct pcdp_uart	uart[];	/* actual size is num_uarts */
 	/* remainder of table is pcdp_device structures */
 } __attribute__((packed));
diff --git a/drivers/firmware/qcom_scm-legacy.c b/drivers/firmware/qcom_scm-legacy.c
index 8532e7c78ef7..eba6b60bfb61 100644
--- a/drivers/firmware/qcom_scm-legacy.c
+++ b/drivers/firmware/qcom_scm-legacy.c
@@ -56,7 +56,7 @@ struct scm_legacy_command {
 	__le32 buf_offset;
 	__le32 resp_hdr_offset;
 	__le32 id;
-	__le32 buf[0];
+	__le32 buf[];
 };
 
 /**
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 059bb0fbae9e..0e7233a20f34 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -6,7 +6,6 @@
 #include <linux/init.h>
 #include <linux/cpumask.h>
 #include <linux/export.h>
-#include <linux/dma-direct.h>
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/types.h>
@@ -806,8 +805,7 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
 	struct qcom_scm_mem_map_info *mem_to_map;
 	phys_addr_t mem_to_map_phys;
 	phys_addr_t dest_phys;
-	phys_addr_t ptr_phys;
-	dma_addr_t ptr_dma;
+	dma_addr_t ptr_phys;
 	size_t mem_to_map_sz;
 	size_t dest_sz;
 	size_t src_sz;
@@ -824,10 +822,9 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
 	ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
 			ALIGN(dest_sz, SZ_64);
 
-	ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_dma, GFP_KERNEL);
+	ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL);
 	if (!ptr)
 		return -ENOMEM;
-	ptr_phys = dma_to_phys(__scm->dev, ptr_dma);
 
 	/* Fill source vmid detail */
 	src = ptr;
@@ -855,7 +852,7 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
 
 	ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz,
 				    ptr_phys, src_sz, dest_phys, dest_sz);
-	dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_dma);
+	dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_phys);
 	if (ret) {
 		dev_err(__scm->dev,
 			"Assign memory protection call failed %d\n", ret);
@@ -943,7 +940,7 @@ bool qcom_scm_hdcp_available(void)
 
 	qcom_scm_clk_disable();
 
-	return ret > 0 ? true : false;
+	return ret > 0;
 }
 EXPORT_SYMBOL(qcom_scm_hdcp_available);
 
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index 6741fcda0c37..fe6702df24bf 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -6,6 +6,7 @@
 #include <linux/clk/tegra.h>
 #include <linux/genalloc.h>
 #include <linux/mailbox_client.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@@ -869,12 +870,8 @@ static struct platform_driver tegra_bpmp_driver = {
 		.name = "tegra-bpmp",
 		.of_match_table = tegra_bpmp_match,
 		.pm = &tegra_bpmp_pm_ops,
+		.suppress_bind_attrs = true,
 	},
 	.probe = tegra_bpmp_probe,
 };
-
-static int __init tegra_bpmp_init(void)
-{
-	return platform_driver_register(&tegra_bpmp_driver);
-}
-core_initcall(tegra_bpmp_init);
+builtin_platform_driver(tegra_bpmp_driver);
diff --git a/drivers/fpga/dfl-afu-main.c b/drivers/fpga/dfl-afu-main.c
index 65437b6a6842..b0c31789a909 100644
--- a/drivers/fpga/dfl-afu-main.c
+++ b/drivers/fpga/dfl-afu-main.c
@@ -561,14 +561,16 @@ static int afu_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = fdev;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = fdev;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int afu_release(struct inode *inode, struct file *filp)
@@ -581,12 +583,14 @@ static int afu_release(struct inode *inode, struct file *filp)
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mutex_lock(&pdata->lock);
-	__port_reset(pdev);
-	afu_dma_region_destroy(pdata);
-	mutex_unlock(&pdata->lock);
-
 	dfl_feature_dev_use_end(pdata);
 
+	if (!dfl_feature_dev_use_count(pdata)) {
+		__port_reset(pdev);
+		afu_dma_region_destroy(pdata);
+	}
+	mutex_unlock(&pdata->lock);
+
 	return 0;
 }
 
@@ -746,6 +750,12 @@ static long afu_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	return -EINVAL;
 }
 
+static const struct vm_operations_struct afu_vma_ops = {
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+	.access = generic_access_phys,
+#endif
+};
+
 static int afu_mmap(struct file *filp, struct vm_area_struct *vma)
 {
 	struct platform_device *pdev = filp->private_data;
@@ -775,6 +785,9 @@ static int afu_mmap(struct file *filp, struct vm_area_struct *vma)
 	    !(region.flags & DFL_PORT_REGION_WRITE))
 		return -EPERM;
 
+	/* Support debug access to the mapping */
+	vma->vm_ops = &afu_vma_ops;
+
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
 	return remap_pfn_range(vma, vma->vm_start,
diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
index 1d4690c99268..56d720c1af39 100644
--- a/drivers/fpga/dfl-fme-main.c
+++ b/drivers/fpga/dfl-fme-main.c
@@ -600,14 +600,16 @@ static int fme_open(struct inode *inode, struct file *filp)
 	if (WARN_ON(!pdata))
 		return -ENODEV;
 
-	ret = dfl_feature_dev_use_begin(pdata);
-	if (ret)
-		return ret;
-
-	dev_dbg(&fdev->dev, "Device File Open\n");
-	filp->private_data = pdata;
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, filp->f_flags & O_EXCL);
+	if (!ret) {
+		dev_dbg(&fdev->dev, "Device File Opened %d Times\n",
+			dfl_feature_dev_use_count(pdata));
+		filp->private_data = pdata;
+	}
+	mutex_unlock(&pdata->lock);
 
-	return 0;
+	return ret;
 }
 
 static int fme_release(struct inode *inode, struct file *filp)
@@ -616,7 +618,10 @@ static int fme_release(struct inode *inode, struct file *filp)
 	struct platform_device *pdev = pdata->dev;
 
 	dev_dbg(&pdev->dev, "Device File Release\n");
+
+	mutex_lock(&pdata->lock);
 	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
 
 	return 0;
 }
diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index 96a2b8274a33..990994874bf1 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -1079,6 +1079,7 @@ static int __init dfl_fpga_init(void)
  */
 int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1093,7 +1094,11 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
 		goto put_dev_exit;
 	}
 
-	ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	ret = dfl_feature_dev_use_begin(pdata, true);
+	mutex_unlock(&pdata->lock);
 	if (ret)
 		goto put_dev_exit;
 
@@ -1120,6 +1125,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
  */
 int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 {
+	struct dfl_feature_platform_data *pdata;
 	struct platform_device *port_pdev;
 	int ret = -ENODEV;
 
@@ -1138,7 +1144,12 @@ int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
 	if (ret)
 		goto put_dev_exit;
 
-	dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+	pdata = dev_get_platdata(&port_pdev->dev);
+
+	mutex_lock(&pdata->lock);
+	dfl_feature_dev_use_end(pdata);
+	mutex_unlock(&pdata->lock);
+
 	cdev->released_port_num--;
 put_dev_exit:
 	put_device(&port_pdev->dev);
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index 9f0e656de720..74784d3cfe7c 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -205,8 +205,6 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 };
 
-#define DEV_STATUS_IN_USE	0
-
 #define FEATURE_DEV_ID_UNUSED	(-1)
 
 /**
@@ -219,8 +217,9 @@ struct dfl_feature {
  * @dfl_cdev: ptr to container device.
  * @id: id used for this feature device.
  * @disable_count: count for port disable.
+ * @excl_open: set on feature device exclusive open.
+ * @open_count: count for feature device open.
  * @num: number for sub features.
- * @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
  * @private: ptr to feature dev private data.
  * @features: sub features of this feature dev.
  */
@@ -232,26 +231,46 @@ struct dfl_feature_platform_data {
 	struct dfl_fpga_cdev *dfl_cdev;
 	int id;
 	unsigned int disable_count;
-	unsigned long dev_status;
+	bool excl_open;
+	int open_count;
 	void *private;
 	int num;
-	struct dfl_feature features[0];
+	struct dfl_feature features[];
 };
 
 static inline
-int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata)
+int dfl_feature_dev_use_begin(struct dfl_feature_platform_data *pdata,
+			      bool excl)
 {
-	/* Test and set IN_USE flags to ensure file is exclusively used */
-	if (test_and_set_bit_lock(DEV_STATUS_IN_USE, &pdata->dev_status))
+	if (pdata->excl_open)
 		return -EBUSY;
 
+	if (excl) {
+		if (pdata->open_count)
+			return -EBUSY;
+
+		pdata->excl_open = true;
+	}
+	pdata->open_count++;
+
 	return 0;
 }
 
 static inline
 void dfl_feature_dev_use_end(struct dfl_feature_platform_data *pdata)
 {
-	clear_bit_unlock(DEV_STATUS_IN_USE, &pdata->dev_status);
+	pdata->excl_open = false;
+
+	if (WARN_ON(pdata->open_count <= 0))
+		return;
+
+	pdata->open_count--;
+}
+
+static inline
+int dfl_feature_dev_use_count(struct dfl_feature_platform_data *pdata)
+{
+	return pdata->open_count;
 }
 
 static inline
diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c
index 56e112e14a10..8d689fea0dab 100644
--- a/drivers/fpga/ice40-spi.c
+++ b/drivers/fpga/ice40-spi.c
@@ -46,10 +46,16 @@ static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
 	struct spi_message message;
 	struct spi_transfer assert_cs_then_reset_delay = {
 		.cs_change   = 1,
-		.delay_usecs = ICE40_SPI_RESET_DELAY
+		.delay = {
+			.value = ICE40_SPI_RESET_DELAY,
+			.unit = SPI_DELAY_UNIT_USECS
+		}
 	};
 	struct spi_transfer housekeeping_delay_then_release_cs = {
-		.delay_usecs = ICE40_SPI_HOUSEKEEPING_DELAY
+		.delay = {
+			.value = ICE40_SPI_HOUSEKEEPING_DELAY,
+			.unit = SPI_DELAY_UNIT_USECS
+		}
 	};
 	int ret;
 
diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c
index 4d8a87641587..b316369156fe 100644
--- a/drivers/fpga/machxo2-spi.c
+++ b/drivers/fpga/machxo2-spi.c
@@ -157,7 +157,8 @@ static int machxo2_cleanup(struct fpga_manager *mgr)
 	spi_message_init(&msg);
 	tx[1].tx_buf = &refresh;
 	tx[1].len = sizeof(refresh);
-	tx[1].delay_usecs = MACHXO2_REFRESH_USEC;
+	tx[1].delay.value = MACHXO2_REFRESH_USEC;
+	tx[1].delay.unit = SPI_DELAY_UNIT_USECS;
 	spi_message_add_tail(&tx[1], &msg);
 	ret = spi_sync(spi, &msg);
 	if (ret)
@@ -208,7 +209,8 @@ static int machxo2_write_init(struct fpga_manager *mgr,
 	spi_message_init(&msg);
 	tx[0].tx_buf = &enable;
 	tx[0].len = sizeof(enable);
-	tx[0].delay_usecs = MACHXO2_LOW_DELAY_USEC;
+	tx[0].delay.value = MACHXO2_LOW_DELAY_USEC;
+	tx[0].delay.unit = SPI_DELAY_UNIT_USECS;
 	spi_message_add_tail(&tx[0], &msg);
 
 	tx[1].tx_buf = &erase;
@@ -269,7 +271,8 @@ static int machxo2_write(struct fpga_manager *mgr, const char *buf,
 		spi_message_init(&msg);
 		tx.tx_buf = payload;
 		tx.len = MACHXO2_BUF_SIZE;
-		tx.delay_usecs = MACHXO2_HIGH_DELAY_USEC;
+		tx.delay.value = MACHXO2_HIGH_DELAY_USEC;
+		tx.delay.unit = SPI_DELAY_UNIT_USECS;
 		spi_message_add_tail(&tx, &msg);
 		ret = spi_sync(spi, &msg);
 		if (ret) {
@@ -317,7 +320,8 @@ static int machxo2_write_complete(struct fpga_manager *mgr,
 		spi_message_init(&msg);
 		tx[1].tx_buf = &refresh;
 		tx[1].len = sizeof(refresh);
-		tx[1].delay_usecs = MACHXO2_REFRESH_USEC;
+		tx[1].delay.value = MACHXO2_REFRESH_USEC;
+		tx[1].delay.unit = SPI_DELAY_UNIT_USECS;
 		spi_message_add_tail(&tx[1], &msg);
 		ret = spi_sync(spi, &msg);
 		if (ret)
diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c
index 215d33789c74..bac93d009170 100644
--- a/drivers/fpga/stratix10-soc.c
+++ b/drivers/fpga/stratix10-soc.c
@@ -482,7 +482,8 @@ static int s10_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id s10_of_match[] = {
-	{ .compatible = "intel,stratix10-soc-fpga-mgr", },
+	{.compatible = "intel,stratix10-soc-fpga-mgr"},
+	{.compatible = "intel,agilex-soc-fpga-mgr"},
 	{},
 };
 
diff --git a/drivers/gnss/serial.h b/drivers/gnss/serial.h
index 980ffdc86c2a..621953f7821d 100644
--- a/drivers/gnss/serial.h
+++ b/drivers/gnss/serial.h
@@ -16,7 +16,7 @@ struct gnss_serial {
 	struct gnss_device *gdev;
 	speed_t	speed;
 	const struct gnss_serial_ops *ops;
-	unsigned long drvdata[0];
+	unsigned long drvdata[];
 };
 
 enum gnss_serial_pm_state {
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 1b96169d84f7..8ef2179fb999 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -422,7 +422,7 @@ config GPIO_OMAP
 	  Say yes here to enable GPIO support for TI OMAP SoCs.
 
 config GPIO_PL061
-	bool "PrimeCell PL061 GPIO support"
+	tristate "PrimeCell PL061 GPIO support"
 	depends on ARM_AMBA
 	select IRQ_DOMAIN
 	select GPIOLIB_IRQCHIP
diff --git a/drivers/gpio/TODO b/drivers/gpio/TODO
index 3a44e6ae52bd..b989c9352da2 100644
--- a/drivers/gpio/TODO
+++ b/drivers/gpio/TODO
@@ -99,6 +99,10 @@ similar and probe a proper driver in the gpiolib subsystem.
 In some cases it makes sense to create a GPIO chip from the local driver
 for a few GPIOs. Those should stay where they are.
 
+At the same time it makes sense to get rid of code duplication in existing or
+new coming drivers. For example, gpio-ml-ioh should be incorporated into
+gpio-pch. In similar way gpio-intel-mid into gpio-pxa.
+
 
 Generic MMIO GPIO
 
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 92e127e74813..8639c4a7f469 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -49,7 +49,9 @@
 #define GPIO_EXT_PORTC		0x58
 #define GPIO_EXT_PORTD		0x5c
 
+#define DWAPB_DRIVER_NAME	"gpio-dwapb"
 #define DWAPB_MAX_PORTS		4
+
 #define GPIO_EXT_PORT_STRIDE	0x04 /* register stride 32 bits */
 #define GPIO_SWPORT_DR_STRIDE	0x0c /* register stride 3*32 bits */
 #define GPIO_SWPORT_DDR_STRIDE	0x0c /* register stride 3*32 bits */
@@ -62,6 +64,8 @@
 #define GPIO_INTSTATUS_V2	0x3c
 #define GPIO_PORTA_EOI_V2	0x40
 
+#define DWAPB_NR_CLOCKS		2
+
 struct dwapb_gpio;
 
 #ifdef CONFIG_PM_SLEEP
@@ -97,7 +101,7 @@ struct dwapb_gpio {
 	struct irq_domain	*domain;
 	unsigned int		flags;
 	struct reset_control	*rst;
-	struct clk		*clk;
+	struct clk_bulk_data	clks[DWAPB_NR_CLOCKS];
 };
 
 static inline u32 gpio_reg_v2_convert(unsigned int offset)
@@ -189,22 +193,21 @@ static void dwapb_toggle_trigger(struct dwapb_gpio *gpio, unsigned int offs)
 
 static u32 dwapb_do_irq(struct dwapb_gpio *gpio)
 {
-	u32 irq_status = dwapb_read(gpio, GPIO_INTSTATUS);
-	u32 ret = irq_status;
+	unsigned long irq_status;
+	irq_hw_number_t hwirq;
 
-	while (irq_status) {
-		int hwirq = fls(irq_status) - 1;
+	irq_status = dwapb_read(gpio, GPIO_INTSTATUS);
+	for_each_set_bit(hwirq, &irq_status, 32) {
 		int gpio_irq = irq_find_mapping(gpio->domain, hwirq);
+		u32 irq_type = irq_get_trigger_type(gpio_irq);
 
 		generic_handle_irq(gpio_irq);
-		irq_status &= ~BIT(hwirq);
 
-		if ((irq_get_trigger_type(gpio_irq) & IRQ_TYPE_SENSE_MASK)
-			== IRQ_TYPE_EDGE_BOTH)
+		if ((irq_type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			dwapb_toggle_trigger(gpio, hwirq);
 	}
 
-	return ret;
+	return irq_status;
 }
 
 static void dwapb_irq_handler(struct irq_desc *desc)
@@ -212,10 +215,9 @@ static void dwapb_irq_handler(struct irq_desc *desc)
 	struct dwapb_gpio *gpio = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 
+	chained_irq_enter(chip, desc);
 	dwapb_do_irq(gpio);
-
-	if (chip->irq_eoi)
-		chip->irq_eoi(irq_desc_get_irq_data(desc));
+	chained_irq_exit(chip, desc);
 }
 
 static void dwapb_irq_enable(struct irq_data *d)
@@ -228,7 +230,7 @@ static void dwapb_irq_enable(struct irq_data *d)
 
 	spin_lock_irqsave(&gc->bgpio_lock, flags);
 	val = dwapb_read(gpio, GPIO_INTEN);
-	val |= BIT(d->hwirq);
+	val |= BIT(irqd_to_hwirq(d));
 	dwapb_write(gpio, GPIO_INTEN, val);
 	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 }
@@ -243,46 +245,20 @@ static void dwapb_irq_disable(struct irq_data *d)
 
 	spin_lock_irqsave(&gc->bgpio_lock, flags);
 	val = dwapb_read(gpio, GPIO_INTEN);
-	val &= ~BIT(d->hwirq);
+	val &= ~BIT(irqd_to_hwirq(d));
 	dwapb_write(gpio, GPIO_INTEN, val);
 	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 }
 
-static int dwapb_irq_reqres(struct irq_data *d)
-{
-	struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
-	struct dwapb_gpio *gpio = igc->private;
-	struct gpio_chip *gc = &gpio->ports[0].gc;
-	int ret;
-
-	ret = gpiochip_lock_as_irq(gc, irqd_to_hwirq(d));
-	if (ret) {
-		dev_err(gpio->dev, "unable to lock HW IRQ %lu for IRQ\n",
-			irqd_to_hwirq(d));
-		return ret;
-	}
-	return 0;
-}
-
-static void dwapb_irq_relres(struct irq_data *d)
-{
-	struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
-	struct dwapb_gpio *gpio = igc->private;
-	struct gpio_chip *gc = &gpio->ports[0].gc;
-
-	gpiochip_unlock_as_irq(gc, irqd_to_hwirq(d));
-}
-
 static int dwapb_irq_set_type(struct irq_data *d, u32 type)
 {
 	struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
 	struct dwapb_gpio *gpio = igc->private;
 	struct gpio_chip *gc = &gpio->ports[0].gc;
-	int bit = d->hwirq;
+	irq_hw_number_t bit = irqd_to_hwirq(d);
 	unsigned long level, polarity, flags;
 
-	if (type & ~(IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
-		     IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+	if (type & ~IRQ_TYPE_SENSE_MASK)
 		return -EINVAL;
 
 	spin_lock_irqsave(&gc->bgpio_lock, flags);
@@ -328,11 +304,12 @@ static int dwapb_irq_set_wake(struct irq_data *d, unsigned int enable)
 	struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
 	struct dwapb_gpio *gpio = igc->private;
 	struct dwapb_context *ctx = gpio->ports[0].ctx;
+	irq_hw_number_t bit = irqd_to_hwirq(d);
 
 	if (enable)
-		ctx->wake_en |= BIT(d->hwirq);
+		ctx->wake_en |= BIT(bit);
 	else
-		ctx->wake_en &= ~BIT(d->hwirq);
+		ctx->wake_en &= ~BIT(bit);
 
 	return 0;
 }
@@ -350,9 +327,10 @@ static int dwapb_gpio_set_debounce(struct gpio_chip *gc,
 
 	val_deb = dwapb_read(gpio, GPIO_PORTA_DEBOUNCE);
 	if (debounce)
-		dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, val_deb | mask);
+		val_deb |= mask;
 	else
-		dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, val_deb & ~mask);
+		val_deb &= ~mask;
+	dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, val_deb);
 
 	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 
@@ -373,12 +351,7 @@ static int dwapb_gpio_set_config(struct gpio_chip *gc, unsigned offset,
 
 static irqreturn_t dwapb_irq_handler_mfd(int irq, void *dev_id)
 {
-	u32 worked;
-	struct dwapb_gpio *gpio = dev_id;
-
-	worked = dwapb_do_irq(gpio);
-
-	return worked ? IRQ_HANDLED : IRQ_NONE;
+	return IRQ_RETVAL(dwapb_do_irq(dev_id));
 }
 
 static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
@@ -388,8 +361,9 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 	struct gpio_chip *gc = &port->gc;
 	struct fwnode_handle  *fwnode = pp->fwnode;
 	struct irq_chip_generic	*irq_gc = NULL;
-	unsigned int hwirq, ngpio = gc->ngpio;
+	unsigned int ngpio = gc->ngpio;
 	struct irq_chip_type *ct;
+	irq_hw_number_t hwirq;
 	int err, i;
 
 	gpio->domain = irq_domain_create_linear(fwnode, ngpio,
@@ -398,7 +372,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 		return;
 
 	err = irq_alloc_domain_generic_chips(gpio->domain, ngpio, 2,
-					     "gpio-dwapb", handle_level_irq,
+					     DWAPB_DRIVER_NAME, handle_bad_irq,
 					     IRQ_NOREQUEST, 0,
 					     IRQ_GC_INIT_NESTED_LOCK);
 	if (err) {
@@ -426,8 +400,6 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 		ct->chip.irq_set_type = dwapb_irq_set_type;
 		ct->chip.irq_enable = dwapb_irq_enable;
 		ct->chip.irq_disable = dwapb_irq_disable;
-		ct->chip.irq_request_resources = dwapb_irq_reqres;
-		ct->chip.irq_release_resources = dwapb_irq_relres;
 #ifdef CONFIG_PM_SLEEP
 		ct->chip.irq_set_wake = dwapb_irq_set_wake;
 #endif
@@ -437,6 +409,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 	}
 
 	irq_gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
+	irq_gc->chip_types[0].handler = handle_level_irq;
 	irq_gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
 	irq_gc->chip_types[1].handler = handle_edge_irq;
 
@@ -455,7 +428,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 		 */
 		err = devm_request_irq(gpio->dev, pp->irq[0],
 				       dwapb_irq_handler_mfd,
-				       IRQF_SHARED, "gpio-dwapb-mfd", gpio);
+				       IRQF_SHARED, DWAPB_DRIVER_NAME, gpio);
 		if (err) {
 			dev_err(gpio->dev, "error requesting IRQ\n");
 			irq_domain_remove(gpio->domain);
@@ -464,7 +437,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 		}
 	}
 
-	for (hwirq = 0 ; hwirq < ngpio ; hwirq++)
+	for (hwirq = 0; hwirq < ngpio; hwirq++)
 		irq_create_mapping(gpio->domain, hwirq);
 
 	port->gc.to_irq = dwapb_gpio_to_irq;
@@ -480,7 +453,7 @@ static void dwapb_irq_teardown(struct dwapb_gpio *gpio)
 	if (!gpio->domain)
 		return;
 
-	for (hwirq = 0 ; hwirq < ngpio ; hwirq++)
+	for (hwirq = 0; hwirq < ngpio; hwirq++)
 		irq_dispose_mapping(irq_find_mapping(gpio->domain, hwirq));
 
 	irq_domain_remove(gpio->domain);
@@ -505,10 +478,9 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 		return -ENOMEM;
 #endif
 
-	dat = gpio->regs + GPIO_EXT_PORTA + (pp->idx * GPIO_EXT_PORT_STRIDE);
-	set = gpio->regs + GPIO_SWPORTA_DR + (pp->idx * GPIO_SWPORT_DR_STRIDE);
-	dirout = gpio->regs + GPIO_SWPORTA_DDR +
-		(pp->idx * GPIO_SWPORT_DDR_STRIDE);
+	dat = gpio->regs + GPIO_EXT_PORTA + pp->idx * GPIO_EXT_PORT_STRIDE;
+	set = gpio->regs + GPIO_SWPORTA_DR + pp->idx * GPIO_SWPORT_DR_STRIDE;
+	dirout = gpio->regs + GPIO_SWPORTA_DDR + pp->idx * GPIO_SWPORT_DDR_STRIDE;
 
 	/* This registers 32 GPIO lines per port */
 	err = bgpio_init(&port->gc, gpio->dev, 4, dat, set, NULL, dirout,
@@ -555,14 +527,38 @@ static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
 			gpiochip_remove(&gpio->ports[m].gc);
 }
 
-static struct dwapb_platform_data *
-dwapb_gpio_get_pdata(struct device *dev)
+static void dwapb_get_irq(struct device *dev, struct fwnode_handle *fwnode,
+			  struct dwapb_port_property *pp)
+{
+	struct device_node *np = NULL;
+	int j;
+
+	if (fwnode_property_read_bool(fwnode, "interrupt-controller"))
+		np = to_of_node(fwnode);
+
+	for (j = 0; j < pp->ngpio; j++) {
+		pp->irq[j] = -ENXIO;
+
+		if (np)
+			pp->irq[j] = of_irq_get(np, j);
+		else if (has_acpi_companion(dev))
+			pp->irq[j] = platform_get_irq(to_platform_device(dev), j);
+
+		if (pp->irq[j] >= 0)
+			pp->has_irq = true;
+	}
+
+	if (!pp->has_irq)
+		dev_warn(dev, "no irq for port%d\n", pp->idx);
+}
+
+static struct dwapb_platform_data *dwapb_gpio_get_pdata(struct device *dev)
 {
 	struct fwnode_handle *fwnode;
 	struct dwapb_platform_data *pdata;
 	struct dwapb_port_property *pp;
 	int nports;
-	int i, j;
+	int i;
 
 	nports = device_get_child_node_count(dev);
 	if (nports == 0)
@@ -580,8 +576,6 @@ dwapb_gpio_get_pdata(struct device *dev)
 
 	i = 0;
 	device_for_each_child_node(dev, fwnode)  {
-		struct device_node *np = NULL;
-
 		pp = &pdata->properties[i++];
 		pp->fwnode = fwnode;
 
@@ -593,8 +587,7 @@ dwapb_gpio_get_pdata(struct device *dev)
 			return ERR_PTR(-EINVAL);
 		}
 
-		if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
-					 &pp->ngpio)) {
+		if (fwnode_property_read_u32(fwnode, "snps,nr-gpios", &pp->ngpio)) {
 			dev_info(dev,
 				 "failed to get number of gpios for port%d\n",
 				 i);
@@ -608,28 +601,8 @@ dwapb_gpio_get_pdata(struct device *dev)
 		 * Only port A can provide interrupts in all configurations of
 		 * the IP.
 		 */
-		if (pp->idx != 0)
-			continue;
-
-		if (dev->of_node && fwnode_property_read_bool(fwnode,
-						  "interrupt-controller")) {
-			np = to_of_node(fwnode);
-		}
-
-		for (j = 0; j < pp->ngpio; j++) {
-			pp->irq[j] = -ENXIO;
-
-			if (np)
-				pp->irq[j] = of_irq_get(np, j);
-			else if (has_acpi_companion(dev))
-				pp->irq[j] = platform_get_irq(to_platform_device(dev), j);
-
-			if (pp->irq[j] >= 0)
-				pp->has_irq = true;
-		}
-
-		if (!pp->has_irq)
-			dev_warn(dev, "no irq for port%d\n", pp->idx);
+		if (pp->idx == 0)
+			dwapb_get_irq(dev, fwnode, pp);
 	}
 
 	return pdata;
@@ -689,29 +662,24 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(gpio->regs))
 		return PTR_ERR(gpio->regs);
 
-	/* Optional bus clock */
-	gpio->clk = devm_clk_get(&pdev->dev, "bus");
-	if (!IS_ERR(gpio->clk)) {
-		err = clk_prepare_enable(gpio->clk);
-		if (err) {
-			dev_info(&pdev->dev, "Cannot enable clock\n");
-			return err;
-		}
+	/* Optional bus and debounce clocks */
+	gpio->clks[0].id = "bus";
+	gpio->clks[1].id = "db";
+	err = devm_clk_bulk_get_optional(&pdev->dev, DWAPB_NR_CLOCKS,
+					 gpio->clks);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot get APB/Debounce clocks\n");
+		return err;
 	}
 
-	gpio->flags = 0;
-	if (dev->of_node) {
-		gpio->flags = (uintptr_t)of_device_get_match_data(dev);
-	} else if (has_acpi_companion(dev)) {
-		const struct acpi_device_id *acpi_id;
-
-		acpi_id = acpi_match_device(dwapb_acpi_match, dev);
-		if (acpi_id) {
-			if (acpi_id->driver_data)
-				gpio->flags = acpi_id->driver_data;
-		}
+	err = clk_bulk_prepare_enable(DWAPB_NR_CLOCKS, gpio->clks);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot enable APB/Debounce clocks\n");
+		return err;
 	}
 
+	gpio->flags = (uintptr_t)device_get_match_data(dev);
+
 	for (i = 0; i < gpio->nr_ports; i++) {
 		err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);
 		if (err)
@@ -724,7 +692,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
 out_unregister:
 	dwapb_gpio_unregister(gpio);
 	dwapb_irq_teardown(gpio);
-	clk_disable_unprepare(gpio->clk);
+	clk_bulk_disable_unprepare(DWAPB_NR_CLOCKS, gpio->clks);
 
 	return err;
 }
@@ -736,7 +704,7 @@ static int dwapb_gpio_remove(struct platform_device *pdev)
 	dwapb_gpio_unregister(gpio);
 	dwapb_irq_teardown(gpio);
 	reset_control_assert(gpio->rst);
-	clk_disable_unprepare(gpio->clk);
+	clk_bulk_disable_unprepare(DWAPB_NR_CLOCKS, gpio->clks);
 
 	return 0;
 }
@@ -755,8 +723,6 @@ static int dwapb_gpio_suspend(struct device *dev)
 		unsigned int idx = gpio->ports[i].idx;
 		struct dwapb_context *ctx = gpio->ports[i].ctx;
 
-		BUG_ON(!ctx);
-
 		offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_STRIDE;
 		ctx->dir = dwapb_read(gpio, offset);
 
@@ -775,13 +741,12 @@ static int dwapb_gpio_suspend(struct device *dev)
 			ctx->int_deb	= dwapb_read(gpio, GPIO_PORTA_DEBOUNCE);
 
 			/* Mask out interrupts */
-			dwapb_write(gpio, GPIO_INTMASK,
-				    0xffffffff & ~ctx->wake_en);
+			dwapb_write(gpio, GPIO_INTMASK, ~ctx->wake_en);
 		}
 	}
 	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 
-	clk_disable_unprepare(gpio->clk);
+	clk_bulk_disable_unprepare(DWAPB_NR_CLOCKS, gpio->clks);
 
 	return 0;
 }
@@ -791,10 +756,13 @@ static int dwapb_gpio_resume(struct device *dev)
 	struct dwapb_gpio *gpio = dev_get_drvdata(dev);
 	struct gpio_chip *gc	= &gpio->ports[0].gc;
 	unsigned long flags;
-	int i;
+	int i, err;
 
-	if (!IS_ERR(gpio->clk))
-		clk_prepare_enable(gpio->clk);
+	err = clk_bulk_prepare_enable(DWAPB_NR_CLOCKS, gpio->clks);
+	if (err) {
+		dev_err(gpio->dev, "Cannot reenable APB/Debounce clocks\n");
+		return err;
+	}
 
 	spin_lock_irqsave(&gc->bgpio_lock, flags);
 	for (i = 0; i < gpio->nr_ports; i++) {
@@ -802,8 +770,6 @@ static int dwapb_gpio_resume(struct device *dev)
 		unsigned int idx = gpio->ports[i].idx;
 		struct dwapb_context *ctx = gpio->ports[i].ctx;
 
-		BUG_ON(!ctx);
-
 		offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_STRIDE;
 		dwapb_write(gpio, offset, ctx->data);
 
@@ -836,10 +802,10 @@ static SIMPLE_DEV_PM_OPS(dwapb_gpio_pm_ops, dwapb_gpio_suspend,
 
 static struct platform_driver dwapb_gpio_driver = {
 	.driver		= {
-		.name	= "gpio-dwapb",
+		.name	= DWAPB_DRIVER_NAME,
 		.pm	= &dwapb_gpio_pm_ops,
-		.of_match_table = of_match_ptr(dwapb_of_match),
-		.acpi_match_table = ACPI_PTR(dwapb_acpi_match),
+		.of_match_table = dwapb_of_match,
+		.acpi_match_table = dwapb_acpi_match,
 	},
 	.probe		= dwapb_gpio_probe,
 	.remove		= dwapb_gpio_remove,
@@ -850,3 +816,4 @@ module_platform_driver(dwapb_gpio_driver);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jamie Iles");
 MODULE_DESCRIPTION("Synopsys DesignWare APB GPIO driver");
+MODULE_ALIAS("platform:" DWAPB_DRIVER_NAME);
diff --git a/drivers/gpio/gpio-ftgpio010.c b/drivers/gpio/gpio-ftgpio010.c
index fbddb1662428..4031164780f7 100644
--- a/drivers/gpio/gpio-ftgpio010.c
+++ b/drivers/gpio/gpio-ftgpio010.c
@@ -193,7 +193,7 @@ static int ftgpio_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
 	if (val == deb_div) {
 		/*
 		 * The debounce timer happens to already be set to the
-		 * desireable value, what a coincidence! We can just enable
+		 * desirable value, what a coincidence! We can just enable
 		 * debounce on this GPIO line and return. This happens more
 		 * often than you think, for example when all GPIO keys
 		 * on a system are requesting the same debounce interval.
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 2f086d0aa1f4..9960bb8b0f5b 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -89,7 +89,7 @@ static struct {
 	struct device *dev;
 	struct gpio_chip chip;
 	struct resource *gpio_base;	/* GPIO IO base */
-	struct resource *pm_base;	/* Power Mangagment IO base */
+	struct resource *pm_base;	/* Power Management IO base */
 	struct ichx_desc *desc;	/* Pointer to chipset-specific description */
 	u32 orig_gpio_ctrl;	/* Orig CTRL value, used to restore on exit */
 	u8 use_gpio;		/* Which GPIO groups are usable */
diff --git a/drivers/gpio/gpio-merrifield.c b/drivers/gpio/gpio-merrifield.c
index 48918a016cd8..706687fab634 100644
--- a/drivers/gpio/gpio-merrifield.c
+++ b/drivers/gpio/gpio-merrifield.c
@@ -443,8 +443,8 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id
 
 	base = pcim_iomap_table(pdev)[1];
 
-	irq_base = readl(base);
-	gpio_base = readl(sizeof(u32) + base);
+	irq_base = readl(base + 0 * sizeof(u32));
+	gpio_base = readl(base + 1 * sizeof(u32));
 
 	/* Release the IO mapping, since we already get the info from BAR1 */
 	pcim_iounmap_regions(pdev, BIT(1));
@@ -473,6 +473,10 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id
 
 	raw_spin_lock_init(&priv->lock);
 
+	retval = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (retval < 0)
+		return retval;
+
 	girq = &priv->chip.irq;
 	girq->chip = &mrfld_irqchip;
 	girq->init_hw = mrfld_irq_init_hw;
@@ -482,7 +486,7 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id
 				     sizeof(*girq->parents), GFP_KERNEL);
 	if (!girq->parents)
 		return -ENOMEM;
-	girq->parents[0] = pdev->irq;
+	girq->parents[0] = pci_irq_vector(pdev, 0);
 	girq->first = irq_base;
 	girq->default_type = IRQ_TYPE_NONE;
 	girq->handler = handle_bad_irq;
diff --git a/drivers/gpio/gpio-mlxbf2.c b/drivers/gpio/gpio-mlxbf2.c
index 7b7085050219..fca6a50d9308 100644
--- a/drivers/gpio/gpio-mlxbf2.c
+++ b/drivers/gpio/gpio-mlxbf2.c
@@ -14,7 +14,6 @@
 #include <linux/resource.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
-#include <linux/version.h>
 
 /*
  * There are 3 YU GPIO blocks:
@@ -110,8 +109,8 @@ static int mlxbf2_gpio_get_lock_res(struct platform_device *pdev)
 	}
 
 	yu_arm_gpio_lock_param.io = devm_ioremap(dev, res->start, size);
-	if (IS_ERR(yu_arm_gpio_lock_param.io))
-		ret = PTR_ERR(yu_arm_gpio_lock_param.io);
+	if (!yu_arm_gpio_lock_param.io)
+		ret = -ENOMEM;
 
 exit:
 	mutex_unlock(yu_arm_gpio_lock_param.lock);
diff --git a/drivers/gpio/gpio-mm-lantiq.c b/drivers/gpio/gpio-mm-lantiq.c
index f460d71b0c92..538e31fe8903 100644
--- a/drivers/gpio/gpio-mm-lantiq.c
+++ b/drivers/gpio/gpio-mm-lantiq.c
@@ -36,7 +36,7 @@ struct ltq_mm {
  * @chip:     Pointer to our private data structure.
  *
  * Write the shadow value to the EBU to set the gpios. We need to set the
- * global EBU lock to make sure that PCI/MTD dont break.
+ * global EBU lock to make sure that PCI/MTD don't break.
  */
 static void ltq_mm_apply(struct ltq_mm *chip)
 {
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 5638b4e5355f..4bb3d3524bc7 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -306,37 +306,39 @@ static const struct regmap_config pca953x_i2c_regmap = {
 	.writeable_reg = pca953x_writeable_register,
 	.volatile_reg = pca953x_volatile_register,
 
+	.disable_locking = true,
 	.cache_type = REGCACHE_RBTREE,
-	/* REVISIT: should be 0x7f but some 24 bit chips use REG_ADDR_AI */
-	.max_register = 0xff,
+	.max_register = 0x7f,
 };
 
-static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,
-			      bool write, bool addrinc)
+static const struct regmap_config pca953x_ai_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.read_flag_mask = REG_ADDR_AI,
+	.write_flag_mask = REG_ADDR_AI,
+
+	.readable_reg = pca953x_readable_register,
+	.writeable_reg = pca953x_writeable_register,
+	.volatile_reg = pca953x_volatile_register,
+
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = 0x7f,
+};
+
+static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off)
 {
 	int bank_shift = pca953x_bank_shift(chip);
 	int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
 	int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
 	u8 regaddr = pinctrl | addr | (off / BANK_SZ);
 
-	/* Single byte read doesn't need AI bit set. */
-	if (!addrinc)
-		return regaddr;
-
-	/* Chips with 24 and more GPIOs always support Auto Increment */
-	if (write && NBANK(chip) > 2)
-		regaddr |= REG_ADDR_AI;
-
-	/* PCA9575 needs address-increment on multi-byte writes */
-	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE)
-		regaddr |= REG_ADDR_AI;
-
 	return regaddr;
 }
 
 static int pca953x_write_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
 {
-	u8 regaddr = pca953x_recalc_addr(chip, reg, 0, true, true);
+	u8 regaddr = pca953x_recalc_addr(chip, reg, 0);
 	u8 value[MAX_BANK];
 	int i, ret;
 
@@ -354,7 +356,7 @@ static int pca953x_write_regs(struct pca953x_chip *chip, int reg, unsigned long
 
 static int pca953x_read_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
 {
-	u8 regaddr = pca953x_recalc_addr(chip, reg, 0, false, true);
+	u8 regaddr = pca953x_recalc_addr(chip, reg, 0);
 	u8 value[MAX_BANK];
 	int i, ret;
 
@@ -373,8 +375,7 @@ static int pca953x_read_regs(struct pca953x_chip *chip, int reg, unsigned long *
 static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
 {
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
-	u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
-					true, false);
+	u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
 	u8 bit = BIT(off % BANK_SZ);
 	int ret;
 
@@ -388,10 +389,8 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
 		unsigned off, int val)
 {
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
-	u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
-					true, false);
-	u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off,
-					true, false);
+	u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
+	u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off);
 	u8 bit = BIT(off % BANK_SZ);
 	int ret;
 
@@ -411,8 +410,7 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
 static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
 {
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
-	u8 inreg = pca953x_recalc_addr(chip, chip->regs->input, off,
-				       true, false);
+	u8 inreg = pca953x_recalc_addr(chip, chip->regs->input, off);
 	u8 bit = BIT(off % BANK_SZ);
 	u32 reg_val;
 	int ret;
@@ -436,8 +434,7 @@ static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
 static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
 {
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
-	u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off,
-					true, false);
+	u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off);
 	u8 bit = BIT(off % BANK_SZ);
 
 	mutex_lock(&chip->i2c_lock);
@@ -448,8 +445,7 @@ static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
 static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
 {
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
-	u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
-					true, false);
+	u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
 	u8 bit = BIT(off % BANK_SZ);
 	u32 reg_val;
 	int ret;
@@ -466,6 +462,23 @@ static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
 	return GPIO_LINE_DIRECTION_OUT;
 }
 
+static int pca953x_gpio_get_multiple(struct gpio_chip *gc,
+				     unsigned long *mask, unsigned long *bits)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	DECLARE_BITMAP(reg_val, MAX_LINE);
+	int ret;
+
+	mutex_lock(&chip->i2c_lock);
+	ret = pca953x_read_regs(chip, chip->regs->input, reg_val);
+	mutex_unlock(&chip->i2c_lock);
+	if (ret)
+		return ret;
+
+	bitmap_replace(bits, bits, reg_val, mask, gc->ngpio);
+	return 0;
+}
+
 static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
 				      unsigned long *mask, unsigned long *bits)
 {
@@ -489,10 +502,8 @@ static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip,
 					 unsigned int offset,
 					 unsigned long config)
 {
-	u8 pull_en_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_EN, offset,
-					     true, false);
-	u8 pull_sel_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_SEL, offset,
-					      true, false);
+	u8 pull_en_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_EN, offset);
+	u8 pull_sel_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_SEL, offset);
 	u8 bit = BIT(offset % BANK_SZ);
 	int ret;
 
@@ -531,7 +542,7 @@ static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
 {
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
 
-	switch (config) {
+	switch (pinconf_to_config_param(config)) {
 	case PIN_CONFIG_BIAS_PULL_UP:
 	case PIN_CONFIG_BIAS_PULL_DOWN:
 		return pca953x_gpio_set_pull_up_down(chip, offset, config);
@@ -551,6 +562,7 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
 	gc->get = pca953x_gpio_get_value;
 	gc->set = pca953x_gpio_set_value;
 	gc->get_direction = pca953x_gpio_get_direction;
+	gc->get_multiple = pca953x_gpio_get_multiple;
 	gc->set_multiple = pca953x_gpio_set_multiple;
 	gc->set_config = pca953x_gpio_set_config;
 	gc->can_sleep = true;
@@ -863,6 +875,7 @@ static int pca953x_probe(struct i2c_client *client,
 	int ret;
 	u32 invert = 0;
 	struct regulator *reg;
+	const struct regmap_config *regmap_config;
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
@@ -925,7 +938,17 @@ static int pca953x_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, chip);
 
-	chip->regmap = devm_regmap_init_i2c(client, &pca953x_i2c_regmap);
+	pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
+
+	if (NBANK(chip) > 2 || PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
+		dev_info(&client->dev, "using AI\n");
+		regmap_config = &pca953x_ai_i2c_regmap;
+	} else {
+		dev_info(&client->dev, "using no AI\n");
+		regmap_config = &pca953x_i2c_regmap;
+	}
+
+	chip->regmap = devm_regmap_init_i2c(client, regmap_config);
 	if (IS_ERR(chip->regmap)) {
 		ret = PTR_ERR(chip->regmap);
 		goto err_exit;
@@ -956,7 +979,6 @@ static int pca953x_probe(struct i2c_client *client,
 	/* initialize cached registers from their original values.
 	 * we can't share this chip with another i2c master.
 	 */
-	pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
 
 	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
 		chip->regs = &pca953x_regs;
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index 3f3d9a94b709..e96d28bf43b4 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  */
+#include <linux/bits.h>
 #include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -11,11 +12,11 @@
 #include <linux/slab.h>
 
 #define PCH_EDGE_FALLING	0
-#define PCH_EDGE_RISING		BIT(0)
-#define PCH_LEVEL_L		BIT(1)
-#define PCH_LEVEL_H		(BIT(0) | BIT(1))
-#define PCH_EDGE_BOTH		BIT(2)
-#define PCH_IM_MASK		(BIT(0) | BIT(1) | BIT(2))
+#define PCH_EDGE_RISING		1
+#define PCH_LEVEL_L		2
+#define PCH_LEVEL_H		3
+#define PCH_EDGE_BOTH		4
+#define PCH_IM_MASK		GENMASK(2, 0)
 
 #define PCH_IRQ_BASE		24
 
@@ -103,9 +104,9 @@ static void pch_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
 	spin_lock_irqsave(&chip->spinlock, flags);
 	reg_val = ioread32(&chip->reg->po);
 	if (val)
-		reg_val |= (1 << nr);
+		reg_val |= BIT(nr);
 	else
-		reg_val &= ~(1 << nr);
+		reg_val &= ~BIT(nr);
 
 	iowrite32(reg_val, &chip->reg->po);
 	spin_unlock_irqrestore(&chip->spinlock, flags);
@@ -115,7 +116,7 @@ static int pch_gpio_get(struct gpio_chip *gpio, unsigned nr)
 {
 	struct pch_gpio *chip =	gpiochip_get_data(gpio);
 
-	return (ioread32(&chip->reg->pi) >> nr) & 1;
+	return !!(ioread32(&chip->reg->pi) & BIT(nr));
 }
 
 static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
@@ -130,13 +131,14 @@ static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 
 	reg_val = ioread32(&chip->reg->po);
 	if (val)
-		reg_val |= (1 << nr);
+		reg_val |= BIT(nr);
 	else
-		reg_val &= ~(1 << nr);
+		reg_val &= ~BIT(nr);
 	iowrite32(reg_val, &chip->reg->po);
 
-	pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1);
-	pm |= (1 << nr);
+	pm = ioread32(&chip->reg->pm);
+	pm &= BIT(gpio_pins[chip->ioh]) - 1;
+	pm |= BIT(nr);
 	iowrite32(pm, &chip->reg->pm);
 
 	spin_unlock_irqrestore(&chip->spinlock, flags);
@@ -151,8 +153,9 @@ static int pch_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->spinlock, flags);
-	pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1);
-	pm &= ~(1 << nr);
+	pm = ioread32(&chip->reg->pm);
+	pm &= BIT(gpio_pins[chip->ioh]) - 1;
+	pm &= ~BIT(nr);
 	iowrite32(pm, &chip->reg->pm);
 	spin_unlock_irqrestore(&chip->spinlock, flags);
 
@@ -226,17 +229,15 @@ static int pch_irq_type(struct irq_data *d, unsigned int type)
 	int ch, irq = d->irq;
 
 	ch = irq - chip->irq_base;
-	if (irq <= chip->irq_base + 7) {
+	if (irq < chip->irq_base + 8) {
 		im_reg = &chip->reg->im0;
-		im_pos = ch;
+		im_pos = ch - 0;
 	} else {
 		im_reg = &chip->reg->im1;
 		im_pos = ch - 8;
 	}
 	dev_dbg(chip->dev, "irq=%d type=%d ch=%d pos=%d\n", irq, type, ch, im_pos);
 
-	spin_lock_irqsave(&chip->spinlock, flags);
-
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		val = PCH_EDGE_RISING;
@@ -254,20 +255,21 @@ static int pch_irq_type(struct irq_data *d, unsigned int type)
 		val = PCH_LEVEL_L;
 		break;
 	default:
-		goto unlock;
+		return 0;
 	}
 
+	spin_lock_irqsave(&chip->spinlock, flags);
+
 	/* Set interrupt mode */
 	im = ioread32(im_reg) & ~(PCH_IM_MASK << (im_pos * 4));
 	iowrite32(im | (val << (im_pos * 4)), im_reg);
 
 	/* And the handler */
-	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+	if (type & IRQ_TYPE_LEVEL_MASK)
 		irq_set_handler_locked(d, handle_level_irq);
-	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+	else if (type & IRQ_TYPE_EDGE_BOTH)
 		irq_set_handler_locked(d, handle_edge_irq);
 
-unlock:
 	spin_unlock_irqrestore(&chip->spinlock, flags);
 	return 0;
 }
@@ -277,7 +279,7 @@ static void pch_irq_unmask(struct irq_data *d)
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct pch_gpio *chip = gc->private;
 
-	iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->imaskclr);
+	iowrite32(BIT(d->irq - chip->irq_base), &chip->reg->imaskclr);
 }
 
 static void pch_irq_mask(struct irq_data *d)
@@ -285,7 +287,7 @@ static void pch_irq_mask(struct irq_data *d)
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct pch_gpio *chip = gc->private;
 
-	iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->imask);
+	iowrite32(BIT(d->irq - chip->irq_base), &chip->reg->imask);
 }
 
 static void pch_irq_ack(struct irq_data *d)
@@ -293,21 +295,22 @@ static void pch_irq_ack(struct irq_data *d)
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct pch_gpio *chip = gc->private;
 
-	iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->iclr);
+	iowrite32(BIT(d->irq - chip->irq_base), &chip->reg->iclr);
 }
 
 static irqreturn_t pch_gpio_handler(int irq, void *dev_id)
 {
 	struct pch_gpio *chip = dev_id;
 	unsigned long reg_val = ioread32(&chip->reg->istatus);
-	int i, ret = IRQ_NONE;
+	int i;
+
+	dev_dbg(chip->dev, "irq=%d  status=0x%lx\n", irq, reg_val);
 
-	for_each_set_bit(i, &reg_val, gpio_pins[chip->ioh]) {
-		dev_dbg(chip->dev, "[%d]:irq=%d  status=0x%lx\n", i, irq, reg_val);
+	reg_val &= BIT(gpio_pins[chip->ioh]) - 1;
+	for_each_set_bit(i, &reg_val, gpio_pins[chip->ioh])
 		generic_handle_irq(chip->irq_base + i);
-		ret = IRQ_HANDLED;
-	}
-	return ret;
+
+	return IRQ_RETVAL(reg_val);
 }
 
 static int pch_gpio_alloc_generic_chip(struct pch_gpio *chip,
@@ -344,7 +347,6 @@ static int pch_gpio_probe(struct pci_dev *pdev,
 	s32 ret;
 	struct pch_gpio *chip;
 	int irq_base;
-	u32 msk;
 
 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
@@ -357,7 +359,7 @@ static int pch_gpio_probe(struct pci_dev *pdev,
 		return ret;
 	}
 
-	ret = pcim_iomap_regions(pdev, 1 << 1, KBUILD_MODNAME);
+	ret = pcim_iomap_regions(pdev, BIT(1), KBUILD_MODNAME);
 	if (ret) {
 		dev_err(&pdev->dev, "pci_request_regions FAILED-%d", ret);
 		return ret;
@@ -393,9 +395,8 @@ static int pch_gpio_probe(struct pci_dev *pdev,
 	chip->irq_base = irq_base;
 
 	/* Mask all interrupts, but enable them */
-	msk = (1 << gpio_pins[chip->ioh]) - 1;
-	iowrite32(msk, &chip->reg->imask);
-	iowrite32(msk, &chip->reg->ien);
+	iowrite32(BIT(gpio_pins[chip->ioh]) - 1, &chip->reg->imask);
+	iowrite32(BIT(gpio_pins[chip->ioh]) - 1, &chip->reg->ien);
 
 	ret = devm_request_irq(&pdev->dev, pdev->irq, pch_gpio_handler,
 			       IRQF_SHARED, KBUILD_MODNAME, chip);
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index e241fb884c12..f1b53dd1df1a 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqchip/chained_irq.h>
+#include <linux/module.h>
 #include <linux/bitops.h>
 #include <linux/gpio/driver.h>
 #include <linux/device.h>
@@ -408,6 +409,7 @@ static const struct amba_id pl061_ids[] = {
 	},
 	{ 0, 0 },
 };
+MODULE_DEVICE_TABLE(amba, pl061_ids);
 
 static struct amba_driver pl061_gpio_driver = {
 	.drv = {
@@ -419,9 +421,6 @@ static struct amba_driver pl061_gpio_driver = {
 	.id_table	= pl061_ids,
 	.probe		= pl061_probe,
 };
+module_amba_driver(pl061_gpio_driver);
 
-static int __init pl061_gpio_init(void)
-{
-	return amba_driver_register(&pl061_gpio_driver);
-}
-device_initcall(pl061_gpio_init);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index acb99eff9939..86568154cdb3 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -368,6 +368,7 @@ static void tegra_gpio_irq_shutdown(struct irq_data *d)
 	struct tegra_gpio_info *tgi = bank->tgi;
 	unsigned int gpio = d->hwirq;
 
+	tegra_gpio_irq_mask(d);
 	gpiochip_unlock_as_irq(&tgi->gc, gpio);
 }
 
diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c
index 25d86441666e..b45bfa9baa26 100644
--- a/drivers/gpio/gpio-xgene-sb.c
+++ b/drivers/gpio/gpio-xgene-sb.c
@@ -122,7 +122,7 @@ static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio)
 	fwspec.fwnode = gc->parent->fwnode;
 	fwspec.param_count = 2;
 	fwspec.param[0] = GPIO_TO_HWIRQ(priv, gpio);
-	fwspec.param[1] = IRQ_TYPE_NONE;
+	fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
 	return irq_create_fwspec_mapping(&fwspec);
 }
 
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 0017367e94ee..9276051663da 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1353,7 +1353,7 @@ int acpi_gpio_count(struct device *dev, const char *con_id)
 }
 
 /* Run deferred acpi_gpiochip_request_irqs() */
-static int acpi_gpio_handle_deferred_request_irqs(void)
+static int __init acpi_gpio_handle_deferred_request_irqs(void)
 {
 	struct acpi_gpio_chip *acpi_gpio, *tmp;
 
@@ -1371,7 +1371,7 @@ static int acpi_gpio_handle_deferred_request_irqs(void)
 /* We must use _sync so that this runs after the first deferred_probe run */
 late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
 
-static const struct dmi_system_id gpiolib_acpi_quirks[] = {
+static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
 	{
 		/*
 		 * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
@@ -1455,7 +1455,7 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] = {
 	{} /* Terminating entry */
 };
 
-static int acpi_gpio_setup_params(void)
+static int __init acpi_gpio_setup_params(void)
 {
 	const struct acpi_gpiolib_dmi_quirk *quirk = NULL;
 	const struct dmi_system_id *id;
diff --git a/drivers/gpio/gpiolib-devprop.c b/drivers/gpio/gpiolib-devprop.c
index 53781b253986..26741032fa9e 100644
--- a/drivers/gpio/gpiolib-devprop.c
+++ b/drivers/gpio/gpiolib-devprop.c
@@ -37,8 +37,11 @@ void devprop_gpiochip_set_names(struct gpio_chip *chip,
 	if (count < 0)
 		return;
 
-	if (count > gdev->ngpio)
+	if (count > gdev->ngpio) {
+		dev_warn(&gdev->dev, "gpio-line-names is length %d but should be at most length %d",
+			 count, gdev->ngpio);
 		count = gdev->ngpio;
+	}
 
 	names = kcalloc(count, sizeof(*names), GFP_KERNEL);
 	if (!names)
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index ccc449df3792..219eb0054233 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -344,6 +344,12 @@ struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
 	if (transitory)
 		lflags |= GPIO_TRANSITORY;
 
+	if (flags & OF_GPIO_PULL_UP)
+		lflags |= GPIO_PULL_UP;
+
+	if (flags & OF_GPIO_PULL_DOWN)
+		lflags |= GPIO_PULL_DOWN;
+
 	ret = gpiod_configure_flags(desc, propname, lflags, dflags);
 	if (ret < 0) {
 		gpiod_put(desc);
@@ -460,6 +466,24 @@ static struct gpio_desc *of_find_arizona_gpio(struct device *dev,
 	return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
 }
 
+static struct gpio_desc *of_find_usb_gpio(struct device *dev,
+					  const char *con_id,
+					  enum of_gpio_flags *of_flags)
+{
+	/*
+	 * Currently this USB quirk is only for the Fairchild FUSB302 host which is using
+	 * an undocumented DT GPIO line named "fcs,int_n" without the compulsory "-gpios"
+	 * suffix.
+	 */
+	if (!IS_ENABLED(CONFIG_TYPEC_FUSB302))
+		return ERR_PTR(-ENOENT);
+
+	if (!con_id || strcmp(con_id, "fcs,int_n"))
+		return ERR_PTR(-ENOENT);
+
+	return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
+}
+
 struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
 			       unsigned int idx, unsigned long *flags)
 {
@@ -504,6 +528,9 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
 	if (PTR_ERR(desc) == -ENOENT)
 		desc = of_find_arizona_gpio(dev, con_id, &of_flags);
 
+	if (PTR_ERR(desc) == -ENOENT)
+		desc = of_find_usb_gpio(dev, con_id, &of_flags);
+
 	if (IS_ERR(desc))
 		return desc;
 
@@ -585,6 +612,10 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
 		*lflags |= GPIO_ACTIVE_LOW;
 	if (xlate_flags & OF_GPIO_TRANSITORY)
 		*lflags |= GPIO_TRANSITORY;
+	if (xlate_flags & OF_GPIO_PULL_UP)
+		*lflags |= GPIO_PULL_UP;
+	if (xlate_flags & OF_GPIO_PULL_DOWN)
+		*lflags |= GPIO_PULL_DOWN;
 
 	if (of_property_read_bool(np, "input"))
 		*dflags |= GPIOD_IN;
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 40f2d7f69be2..99533f4cb5d3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1158,8 +1158,19 @@ static void gpio_desc_to_lineinfo(struct gpio_desc *desc,
 				  struct gpioline_info *info)
 {
 	struct gpio_chip *gc = desc->gdev->chip;
+	bool ok_for_pinctrl;
 	unsigned long flags;
 
+	/*
+	 * This function takes a mutex so we must check this before taking
+	 * the spinlock.
+	 *
+	 * FIXME: find a non-racy way to retrieve this information. Maybe a
+	 * lock common to both frameworks?
+	 */
+	ok_for_pinctrl =
+		pinctrl_gpio_can_use_line(gc->base + info->line_offset);
+
 	spin_lock_irqsave(&gpio_lock, flags);
 
 	if (desc->name) {
@@ -1186,7 +1197,7 @@ static void gpio_desc_to_lineinfo(struct gpio_desc *desc,
 	    test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
 	    test_bit(FLAG_EXPORT, &desc->flags) ||
 	    test_bit(FLAG_SYSFS, &desc->flags) ||
-	    !pinctrl_gpio_can_use_line(gc->base + info->line_offset))
+	    !ok_for_pinctrl)
 		info->flags |= GPIOLINE_FLAG_KERNEL;
 	if (test_bit(FLAG_IS_OUT, &desc->flags))
 		info->flags |= GPIOLINE_FLAG_IS_OUT;
@@ -1227,6 +1238,7 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	void __user *ip = (void __user *)arg;
 	struct gpio_desc *desc;
 	__u32 offset;
+	int hwgpio;
 
 	/* We fail any subsequent ioctl():s when the chip is gone */
 	if (!gc)
@@ -1259,13 +1271,19 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		if (IS_ERR(desc))
 			return PTR_ERR(desc);
 
+		hwgpio = gpio_chip_hwgpio(desc);
+
+		if (cmd == GPIO_GET_LINEINFO_WATCH_IOCTL &&
+		    test_bit(hwgpio, priv->watched_lines))
+			return -EBUSY;
+
 		gpio_desc_to_lineinfo(desc, &lineinfo);
 
 		if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
 			return -EFAULT;
 
 		if (cmd == GPIO_GET_LINEINFO_WATCH_IOCTL)
-			set_bit(gpio_chip_hwgpio(desc), priv->watched_lines);
+			set_bit(hwgpio, priv->watched_lines);
 
 		return 0;
 	} else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) {
@@ -1280,7 +1298,12 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		if (IS_ERR(desc))
 			return PTR_ERR(desc);
 
-		clear_bit(gpio_chip_hwgpio(desc), priv->watched_lines);
+		hwgpio = gpio_chip_hwgpio(desc);
+
+		if (!test_bit(hwgpio, priv->watched_lines))
+			return -EBUSY;
+
+		clear_bit(hwgpio, priv->watched_lines);
 		return 0;
 	}
 	return -EINVAL;
@@ -1508,9 +1531,8 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)
 
 	/* From this point, the .release() function cleans up gpio_device */
 	gdev->dev.release = gpiodevice_release;
-	pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n",
-		 __func__, gdev->base, gdev->base + gdev->ngpio - 1,
-		 dev_name(&gdev->dev), gdev->chip->label ? : "generic");
+	dev_dbg(&gdev->dev, "registered GPIOs %d to %d on %s\n", gdev->base,
+		gdev->base + gdev->ngpio - 1, gdev->chip->label ? : "generic");
 
 	return 0;
 
@@ -1526,8 +1548,8 @@ static void gpiochip_machine_hog(struct gpio_chip *gc, struct gpiod_hog *hog)
 
 	desc = gpiochip_get_desc(gc, hog->chip_hwnum);
 	if (IS_ERR(desc)) {
-		pr_err("%s: unable to get GPIO desc: %ld\n",
-		       __func__, PTR_ERR(desc));
+		chip_err(gc, "%s: unable to get GPIO desc: %ld\n", __func__,
+			 PTR_ERR(desc));
 		return;
 	}
 
@@ -1536,8 +1558,8 @@ static void gpiochip_machine_hog(struct gpio_chip *gc, struct gpiod_hog *hog)
 
 	rv = gpiod_hog(desc, hog->line_name, hog->lflags, hog->dflags);
 	if (rv)
-		pr_err("%s: unable to hog GPIO line (%s:%u): %d\n",
-		       __func__, gc->label, hog->chip_hwnum, rv);
+		gpiod_err(desc, "%s: unable to hog GPIO line (%s:%u): %d\n",
+			  __func__, gc->label, hog->chip_hwnum, rv);
 }
 
 static void machine_gpiochip_add(struct gpio_chip *gc)
@@ -1562,8 +1584,8 @@ static void gpiochip_setup_devs(void)
 	list_for_each_entry(gdev, &gpio_devices, list) {
 		ret = gpiochip_setup_dev(gdev);
 		if (ret)
-			pr_err("%s: Failed to initialize gpio device (%d)\n",
-			       dev_name(&gdev->dev), ret);
+			dev_err(&gdev->dev,
+				"Failed to initialize gpio device (%d)\n", ret);
 	}
 }
 
@@ -2672,7 +2694,7 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gc,
 		return -EINVAL;
 
 	if (!gc->parent) {
-		pr_err("missing gpiochip .dev parent pointer\n");
+		chip_err(gc, "missing gpiochip .dev parent pointer\n");
 		return -EINVAL;
 	}
 	gc->irq.threaded = threaded;
@@ -4842,7 +4864,7 @@ int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
 
 	/* No particular flag request, return here... */
 	if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
-		pr_debug("no flags found for %s\n", con_id);
+		gpiod_dbg(desc, "no flags found for %s\n", con_id);
 		return 0;
 	}
 
@@ -5067,8 +5089,7 @@ int gpiod_hog(struct gpio_desc *desc, const char *name,
 	/* Mark GPIO as hogged so it can be identified and removed later */
 	set_bit(FLAG_IS_HOGGED, &desc->flags);
 
-	pr_info("GPIO line %d (%s) hogged as %s%s\n",
-		desc_to_gpio(desc), name,
+	gpiod_info(desc, "hogged as %s%s\n",
 		(dflags & GPIOD_FLAGS_BIT_DIR_OUT) ? "output" : "input",
 		(dflags & GPIOD_FLAGS_BIT_DIR_OUT) ?
 		  (dflags & GPIOD_FLAGS_BIT_DIR_VAL) ? "/high" : "/low" : "");
@@ -5289,8 +5310,9 @@ static int __init gpiolib_dev_init(void)
 	gpiolib_initialized = true;
 	gpiochip_setup_devs();
 
-	if (IS_ENABLED(CONFIG_OF_DYNAMIC))
-		WARN_ON(of_reconfig_notifier_register(&gpio_of_notifier));
+#if IS_ENABLED(CONFIG_OF_DYNAMIC) && IS_ENABLED(CONFIG_OF_GPIO)
+	WARN_ON(of_reconfig_notifier_register(&gpio_of_notifier));
+#endif /* CONFIG_OF_DYNAMIC && CONFIG_OF_GPIO */
 
 	return ret;
 }
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 853ce681b4a4..9ed242316414 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -81,8 +81,7 @@ struct gpio_array {
 	unsigned long		invert_mask[];
 };
 
-struct gpio_desc *gpiochip_get_desc(struct gpio_chip *chip,
-				    unsigned int hwnum);
+struct gpio_desc *gpiochip_get_desc(struct gpio_chip *gc, unsigned int hwnum);
 int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 				  unsigned int array_size,
 				  struct gpio_desc **desc_array,
@@ -163,18 +162,18 @@ static inline int gpio_chip_hwgpio(const struct gpio_desc *desc)
 
 /* With chip prefix */
 
-#define chip_emerg(chip, fmt, ...)					\
-	dev_emerg(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__)
-#define chip_crit(chip, fmt, ...)					\
-	dev_crit(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__)
-#define chip_err(chip, fmt, ...)					\
-	dev_err(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__)
-#define chip_warn(chip, fmt, ...)					\
-	dev_warn(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__)
-#define chip_info(chip, fmt, ...)					\
-	dev_info(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__)
-#define chip_dbg(chip, fmt, ...)					\
-	dev_dbg(&chip->gpiodev->dev, "(%s): " fmt, chip->label, ##__VA_ARGS__)
+#define chip_emerg(gc, fmt, ...)					\
+	dev_emerg(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_crit(gc, fmt, ...)					\
+	dev_crit(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_err(gc, fmt, ...)					\
+	dev_err(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_warn(gc, fmt, ...)					\
+	dev_warn(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_info(gc, fmt, ...)					\
+	dev_info(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_dbg(gc, fmt, ...)					\
+	dev_dbg(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
 
 #ifdef CONFIG_GPIO_SYSFS
 
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 43594978958e..c4fd57d8b717 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -161,7 +161,7 @@ config DRM_LOAD_EDID_FIRMWARE
 	  monitor are unable to provide appropriate EDID data. Since this
 	  feature is provided as a workaround for broken hardware, the
 	  default case is N. Details and instructions how to build your own
-	  EDID data are given in Documentation/driver-api/edid.rst.
+	  EDID data are given in Documentation/admin-guide/edid.rst.
 
 config DRM_DP_CEC
 	bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
@@ -310,8 +310,6 @@ source "drivers/gpu/drm/ast/Kconfig"
 
 source "drivers/gpu/drm/mgag200/Kconfig"
 
-source "drivers/gpu/drm/cirrus/Kconfig"
-
 source "drivers/gpu/drm/armada/Kconfig"
 
 source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 7f72ef5e7811..2c0e5a7e5953 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -17,7 +17,8 @@ drm-y       :=	drm_auth.o drm_cache.o \
 		drm_plane.o drm_color_mgmt.o drm_print.o \
 		drm_dumb_buffers.o drm_mode_config.o drm_vblank.o \
 		drm_syncobj.o drm_lease.o drm_writeback.o drm_client.o \
-		drm_client_modeset.o drm_atomic_uapi.o drm_hdcp.o
+		drm_client_modeset.o drm_atomic_uapi.o drm_hdcp.o \
+		drm_managed.o
 
 drm-$(CONFIG_DRM_LEGACY) += drm_legacy_misc.o drm_bufs.o drm_context.o drm_dma.o drm_scatter.o drm_lock.o
 drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o
@@ -32,8 +33,7 @@ drm-$(CONFIG_PCI) += drm_pci.o
 drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
 drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
 
-drm_vram_helper-y := drm_gem_vram_helper.o \
-		     drm_vram_helper_common.o
+drm_vram_helper-y := drm_gem_vram_helper.o
 obj-$(CONFIG_DRM_VRAM_HELPER) += drm_vram_helper.o
 
 drm_ttm_helper-y := drm_gem_ttm_helper.o
@@ -74,7 +74,6 @@ obj-$(CONFIG_DRM_I915)	+= i915/
 obj-$(CONFIG_DRM_MGAG200) += mgag200/
 obj-$(CONFIG_DRM_V3D)  += v3d/
 obj-$(CONFIG_DRM_VC4)  += vc4/
-obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus/
 obj-$(CONFIG_DRM_SIS)   += sis/
 obj-$(CONFIG_DRM_SAVAGE)+= savage/
 obj-$(CONFIG_DRM_VMWGFX)+= vmwgfx/
diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile
index c2bbcdd9c875..210d57a4afc8 100644
--- a/drivers/gpu/drm/amd/amdgpu/Makefile
+++ b/drivers/gpu/drm/amd/amdgpu/Makefile
@@ -55,7 +55,7 @@ amdgpu-y += amdgpu_device.o amdgpu_kms.o \
 	amdgpu_vf_error.o amdgpu_sched.o amdgpu_debugfs.o amdgpu_ids.o \
 	amdgpu_gmc.o amdgpu_mmhub.o amdgpu_xgmi.o amdgpu_csa.o amdgpu_ras.o amdgpu_vm_cpu.o \
 	amdgpu_vm_sdma.o amdgpu_discovery.o amdgpu_ras_eeprom.o amdgpu_nbio.o \
-	amdgpu_umc.o smu_v11_0_i2c.o
+	amdgpu_umc.o smu_v11_0_i2c.o amdgpu_fru_eeprom.o
 
 amdgpu-$(CONFIG_PERF_EVENTS) += amdgpu_pmu.o
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 2992a49ad4a5..99e5f474505d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -28,6 +28,18 @@
 #ifndef __AMDGPU_H__
 #define __AMDGPU_H__
 
+#ifdef pr_fmt
+#undef pr_fmt
+#endif
+
+#define pr_fmt(fmt) "amdgpu: " fmt
+
+#ifdef dev_fmt
+#undef dev_fmt
+#endif
+
+#define dev_fmt(fmt) "amdgpu: " fmt
+
 #include "amdgpu_ctx.h"
 
 #include <linux/atomic.h>
@@ -177,6 +189,8 @@ extern int sched_policy;
 static const int sched_policy = KFD_SCHED_POLICY_HWS;
 #endif
 
+extern int amdgpu_tmz;
+
 #ifdef CONFIG_DRM_AMDGPU_SI
 extern int amdgpu_si_support;
 #endif
@@ -190,8 +204,6 @@ extern int amdgpu_cik_support;
 #define AMDGPU_WAIT_IDLE_TIMEOUT_IN_MS	        3000
 #define AMDGPU_MAX_USEC_TIMEOUT			100000	/* 100 ms */
 #define AMDGPU_FENCE_JIFFIES_TIMEOUT		(HZ / 2)
-/* AMDGPU_IB_POOL_SIZE must be a power of 2 */
-#define AMDGPU_IB_POOL_SIZE			16
 #define AMDGPU_DEBUGFS_MAX_COMPONENTS		32
 #define AMDGPUFB_CONN_LIMIT			4
 #define AMDGPU_BIOS_NUM_SCRATCH			16
@@ -439,7 +451,9 @@ struct amdgpu_fpriv {
 int amdgpu_file_to_fpriv(struct file *filp, struct amdgpu_fpriv **fpriv);
 
 int amdgpu_ib_get(struct amdgpu_device *adev, struct amdgpu_vm *vm,
-		  unsigned size, struct amdgpu_ib *ib);
+		  unsigned size,
+		  enum amdgpu_ib_pool_type pool,
+		  struct amdgpu_ib *ib);
 void amdgpu_ib_free(struct amdgpu_device *adev, struct amdgpu_ib *ib,
 		    struct dma_fence *f);
 int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
@@ -512,7 +526,7 @@ static inline void amdgpu_set_ib_value(struct amdgpu_cs_parser *p,
 /*
  * Writeback
  */
-#define AMDGPU_MAX_WB 128	/* Reserve at most 128 WB slots for amdgpu-owned rings. */
+#define AMDGPU_MAX_WB 256	/* Reserve at most 256 WB slots for amdgpu-owned rings. */
 
 struct amdgpu_wb {
 	struct amdgpu_bo	*wb_obj;
@@ -843,7 +857,8 @@ struct amdgpu_device {
 	unsigned			num_rings;
 	struct amdgpu_ring		*rings[AMDGPU_MAX_RINGS];
 	bool				ib_pool_ready;
-	struct amdgpu_sa_manager	ring_tmp_bo;
+	struct amdgpu_sa_manager	ib_pools[AMDGPU_IB_POOL_MAX];
+	struct amdgpu_sched		gpu_sched[AMDGPU_HW_IP_NUM][AMDGPU_RING_PRIO_MAX];
 
 	/* interrupts */
 	struct amdgpu_irq		irq;
@@ -923,7 +938,7 @@ struct amdgpu_device {
 	atomic64_t gart_pin_size;
 
 	/* soc15 register offset based on ip, instance and  segment */
-	uint32_t 		*reg_offset[MAX_HWIP][HWIP_MAX_INSTANCE];
+	uint32_t		*reg_offset[MAX_HWIP][HWIP_MAX_INSTANCE];
 
 	/* delayed work_func for deferring clockgating during resume */
 	struct delayed_work     delayed_init_work;
@@ -935,9 +950,6 @@ struct amdgpu_device {
 	/* link all shadow bo */
 	struct list_head                shadow_list;
 	struct mutex                    shadow_list_lock;
-	/* keep an lru list of rings by HW IP */
-	struct list_head		ring_lru_list;
-	spinlock_t			ring_lru_list_lock;
 
 	/* record hw reset is performed */
 	bool has_hw_reset;
@@ -946,8 +958,6 @@ struct amdgpu_device {
 	/* s3/s4 mask */
 	bool                            in_suspend;
 
-	/* record last mm index being written through WREG32*/
-	unsigned long last_mm_index;
 	bool                            in_gpu_reset;
 	enum pp_mp1_state               mp1_state;
 	struct mutex  lock_reset;
@@ -966,14 +976,17 @@ struct amdgpu_device {
 	uint64_t			unique_id;
 	uint64_t	df_perfmon_config_assign_mask[AMDGPU_MAX_DF_PERFMONS];
 
-	/* device pstate */
-	int				pstate;
 	/* enable runtime pm on the device */
 	bool                            runpm;
 	bool                            in_runpm;
 
 	bool                            pm_sysfs_en;
 	bool                            ucode_sysfs_en;
+
+	/* Chip product information */
+	char				product_number[16];
+	char				product_name[32];
+	char				serial[16];
 };
 
 static inline struct amdgpu_device *amdgpu_ttm_adev(struct ttm_bo_device *bdev)
@@ -990,10 +1003,10 @@ int amdgpu_gpu_wait_for_idle(struct amdgpu_device *adev);
 
 void amdgpu_device_vram_access(struct amdgpu_device *adev, loff_t pos,
 			       uint32_t *buf, size_t size, bool write);
-uint32_t amdgpu_mm_rreg(struct amdgpu_device *adev, uint32_t reg,
+uint32_t amdgpu_device_rreg(struct amdgpu_device *adev, uint32_t reg,
+			    uint32_t acc_flags);
+void amdgpu_device_wreg(struct amdgpu_device *adev, uint32_t reg, uint32_t v,
 			uint32_t acc_flags);
-void amdgpu_mm_wreg(struct amdgpu_device *adev, uint32_t reg, uint32_t v,
-		    uint32_t acc_flags);
 void amdgpu_mm_wreg_mmio_rlc(struct amdgpu_device *adev, uint32_t reg, uint32_t v,
 		    uint32_t acc_flags);
 void amdgpu_mm_wreg8(struct amdgpu_device *adev, uint32_t offset, uint8_t value);
@@ -1010,25 +1023,20 @@ int emu_soc_asic_init(struct amdgpu_device *adev);
 /*
  * Registers read & write functions.
  */
-
-#define AMDGPU_REGS_IDX       (1<<0)
 #define AMDGPU_REGS_NO_KIQ    (1<<1)
-#define AMDGPU_REGS_KIQ       (1<<2)
 
-#define RREG32_NO_KIQ(reg) amdgpu_mm_rreg(adev, (reg), AMDGPU_REGS_NO_KIQ)
-#define WREG32_NO_KIQ(reg, v) amdgpu_mm_wreg(adev, (reg), (v), AMDGPU_REGS_NO_KIQ)
+#define RREG32_NO_KIQ(reg) amdgpu_device_rreg(adev, (reg), AMDGPU_REGS_NO_KIQ)
+#define WREG32_NO_KIQ(reg, v) amdgpu_device_wreg(adev, (reg), (v), AMDGPU_REGS_NO_KIQ)
 
-#define RREG32_KIQ(reg) amdgpu_mm_rreg(adev, (reg), AMDGPU_REGS_KIQ)
-#define WREG32_KIQ(reg, v) amdgpu_mm_wreg(adev, (reg), (v), AMDGPU_REGS_KIQ)
+#define RREG32_KIQ(reg) amdgpu_kiq_rreg(adev, (reg))
+#define WREG32_KIQ(reg, v) amdgpu_kiq_wreg(adev, (reg), (v))
 
 #define RREG8(reg) amdgpu_mm_rreg8(adev, (reg))
 #define WREG8(reg, v) amdgpu_mm_wreg8(adev, (reg), (v))
 
-#define RREG32(reg) amdgpu_mm_rreg(adev, (reg), 0)
-#define RREG32_IDX(reg) amdgpu_mm_rreg(adev, (reg), AMDGPU_REGS_IDX)
-#define DREG32(reg) printk(KERN_INFO "REGISTER: " #reg " : 0x%08X\n", amdgpu_mm_rreg(adev, (reg), 0))
-#define WREG32(reg, v) amdgpu_mm_wreg(adev, (reg), (v), 0)
-#define WREG32_IDX(reg, v) amdgpu_mm_wreg(adev, (reg), (v), AMDGPU_REGS_IDX)
+#define RREG32(reg) amdgpu_device_rreg(adev, (reg), 0)
+#define DREG32(reg) printk(KERN_INFO "REGISTER: " #reg " : 0x%08X\n", amdgpu_device_rreg(adev, (reg), 0))
+#define WREG32(reg, v) amdgpu_device_wreg(adev, (reg), (v), 0)
 #define REG_SET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
 #define REG_GET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
 #define RREG32_PCIE(reg) adev->pcie_rreg(adev, (reg))
@@ -1065,7 +1073,7 @@ int emu_soc_asic_init(struct amdgpu_device *adev);
 		tmp_ |= ((val) & ~(mask));			\
 		WREG32_PLL(reg, tmp_);				\
 	} while (0)
-#define DREG32_SYS(sqf, adev, reg) seq_printf((sqf), #reg " : 0x%08X\n", amdgpu_mm_rreg((adev), (reg), false))
+#define DREG32_SYS(sqf, adev, reg) seq_printf((sqf), #reg " : 0x%08X\n", amdgpu_device_rreg((adev), (reg), false))
 #define RREG32_IO(reg) amdgpu_io_rreg(adev, (reg))
 #define WREG32_IO(reg, v) amdgpu_io_wreg(adev, (reg), (v))
 
@@ -1248,5 +1256,9 @@ _name##_show(struct device *dev,					\
 									\
 static struct device_attribute pmu_attr_##_name = __ATTR_RO(_name)
 
-#endif
+static inline bool amdgpu_is_tmz(struct amdgpu_device *adev)
+{
+       return adev->gmc.tmz_enabled;
+}
 
+#endif
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
index abfbe89e805e..ad59ac4423b8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
@@ -564,6 +564,13 @@ uint32_t amdgpu_amdkfd_get_num_gws(struct kgd_dev *kgd)
 	return adev->gds.gws_size;
 }
 
+uint32_t amdgpu_amdkfd_get_asic_rev_id(struct kgd_dev *kgd)
+{
+	struct amdgpu_device *adev = (struct amdgpu_device *)kgd;
+
+	return adev->rev_id;
+}
+
 int amdgpu_amdkfd_submit_ib(struct kgd_dev *kgd, enum kgd_engine_type engine,
 				uint32_t vmid, uint64_t gpu_addr,
 				uint32_t *ib_cmd, uint32_t ib_len)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
index 13feb313e9b3..2e3ba8f2a061 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
@@ -27,6 +27,7 @@
 
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/kthread.h>
 #include <linux/workqueue.h>
 #include <kgd_kfd_interface.h>
 #include <drm/ttm/ttm_execbuf_util.h>
@@ -175,6 +176,7 @@ uint64_t amdgpu_amdkfd_get_hive_id(struct kgd_dev *kgd);
 uint64_t amdgpu_amdkfd_get_unique_id(struct kgd_dev *kgd);
 uint64_t amdgpu_amdkfd_get_mmio_remap_phys_addr(struct kgd_dev *kgd);
 uint32_t amdgpu_amdkfd_get_num_gws(struct kgd_dev *kgd);
+uint32_t amdgpu_amdkfd_get_asic_rev_id(struct kgd_dev *kgd);
 uint8_t amdgpu_amdkfd_get_xgmi_hops_count(struct kgd_dev *dst, struct kgd_dev *src);
 
 /* Read user wptr from a specified user address space with page fault
@@ -190,10 +192,10 @@ uint8_t amdgpu_amdkfd_get_xgmi_hops_count(struct kgd_dev *dst, struct kgd_dev *s
 			pagefault_disable();				\
 			if ((mmptr) == current->mm) {			\
 				valid = !get_user((dst), (wptr));	\
-			} else if (current->mm == NULL) {		\
-				use_mm(mmptr);				\
+			} else if (current->flags & PF_KTHREAD) {	\
+				kthread_use_mm(mmptr);			\
 				valid = !get_user((dst), (wptr));	\
-				unuse_mm(mmptr);			\
+				kthread_unuse_mm(mmptr);		\
 			}						\
 			pagefault_enable();				\
 		}							\
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_arcturus.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_arcturus.c
index 6529caca88fe..35d4a5ab0228 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_arcturus.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_arcturus.c
@@ -22,7 +22,6 @@
 #include <linux/module.h>
 #include <linux/fdtable.h>
 #include <linux/uaccess.h>
-#include <linux/mmu_context.h>
 #include <linux/firmware.h>
 #include "amdgpu.h"
 #include "amdgpu_amdkfd.h"
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c
index 4ec6d0c03201..bf927f432506 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c
@@ -19,7 +19,6 @@
  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  * OTHER DEALINGS IN THE SOFTWARE.
  */
-#include <linux/mmu_context.h>
 #include "amdgpu.h"
 #include "amdgpu_amdkfd.h"
 #include "gc/gc_10_1_0_offset.h"
@@ -543,6 +542,9 @@ static int kgd_hqd_destroy(struct kgd_dev *kgd, void *mqd,
 	uint32_t temp;
 	struct v10_compute_mqd *m = get_mqd(mqd);
 
+	if (adev->in_gpu_reset)
+		return -EIO;
+
 #if 0
 	unsigned long flags;
 	int retry;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c
index 0b7e78748540..7d01420c0c85 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c
@@ -20,8 +20,6 @@
  * OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <linux/mmu_context.h>
-
 #include "amdgpu.h"
 #include "amdgpu_amdkfd.h"
 #include "cikd.h"
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c
index ccd635b812b5..635cd1a26bed 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c
@@ -20,8 +20,6 @@
  * OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <linux/mmu_context.h>
-
 #include "amdgpu.h"
 #include "amdgpu_amdkfd.h"
 #include "gfx_v8_0.h"
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
index df841c2ac5e7..c7fd0c47b254 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
@@ -19,8 +19,6 @@
  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  * OTHER DEALINGS IN THE SOFTWARE.
  */
-#include <linux/mmu_context.h>
-
 #include "amdgpu.h"
 #include "amdgpu_amdkfd.h"
 #include "gc/gc_9_0_offset.h"
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
index 9dff792c9290..0768b7eb7683 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
@@ -362,13 +362,13 @@ static int vm_validate_pt_pd_bos(struct amdgpu_vm *vm)
 	ret = amdgpu_vm_validate_pt_bos(adev, vm, amdgpu_amdkfd_validate,
 					&param);
 	if (ret) {
-		pr_err("amdgpu: failed to validate PT BOs\n");
+		pr_err("failed to validate PT BOs\n");
 		return ret;
 	}
 
 	ret = amdgpu_amdkfd_validate(&param, pd);
 	if (ret) {
-		pr_err("amdgpu: failed to validate PD\n");
+		pr_err("failed to validate PD\n");
 		return ret;
 	}
 
@@ -377,7 +377,7 @@ static int vm_validate_pt_pd_bos(struct amdgpu_vm *vm)
 	if (vm->use_cpu_for_update) {
 		ret = amdgpu_bo_kmap(pd, NULL);
 		if (ret) {
-			pr_err("amdgpu: failed to kmap PD, ret=%d\n", ret);
+			pr_err("failed to kmap PD, ret=%d\n", ret);
 			return ret;
 		}
 	}
@@ -660,15 +660,15 @@ static int reserve_bo_and_vm(struct kgd_mem *mem,
 
 	ret = ttm_eu_reserve_buffers(&ctx->ticket, &ctx->list,
 				     false, &ctx->duplicates);
-	if (!ret)
-		ctx->reserved = true;
-	else {
-		pr_err("Failed to reserve buffers in ttm\n");
+	if (ret) {
+		pr_err("Failed to reserve buffers in ttm.\n");
 		kfree(ctx->vm_pd);
 		ctx->vm_pd = NULL;
+		return ret;
 	}
 
-	return ret;
+	ctx->reserved = true;
+	return 0;
 }
 
 /**
@@ -733,17 +733,15 @@ static int reserve_bo_and_cond_vms(struct kgd_mem *mem,
 
 	ret = ttm_eu_reserve_buffers(&ctx->ticket, &ctx->list,
 				     false, &ctx->duplicates);
-	if (!ret)
-		ctx->reserved = true;
-	else
-		pr_err("Failed to reserve buffers in ttm.\n");
-
 	if (ret) {
+		pr_err("Failed to reserve buffers in ttm.\n");
 		kfree(ctx->vm_pd);
 		ctx->vm_pd = NULL;
+		return ret;
 	}
 
-	return ret;
+	ctx->reserved = true;
+	return 0;
 }
 
 /**
@@ -1286,22 +1284,22 @@ int amdgpu_amdkfd_gpuvm_free_memory_of_gpu(
 	struct kfd_bo_va_list *entry, *tmp;
 	struct bo_vm_reservation_context ctx;
 	struct ttm_validate_buffer *bo_list_entry;
+	unsigned int mapped_to_gpu_memory;
 	int ret;
 
 	mutex_lock(&mem->lock);
+	mapped_to_gpu_memory = mem->mapped_to_gpu_memory;
+	mutex_unlock(&mem->lock);
+	/* lock is not needed after this, since mem is unused and will
+	 * be freed anyway
+	 */
 
-	if (mem->mapped_to_gpu_memory > 0) {
+	if (mapped_to_gpu_memory > 0) {
 		pr_debug("BO VA 0x%llx size 0x%lx is still mapped.\n",
 				mem->va, bo_size);
-		mutex_unlock(&mem->lock);
 		return -EBUSY;
 	}
 
-	mutex_unlock(&mem->lock);
-	/* lock is not needed after this, since mem is unused and will
-	 * be freed anyway
-	 */
-
 	/* No more MMU notifiers */
 	amdgpu_mn_unregister(mem->bo);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_benchmark.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_benchmark.c
index d1495e1c9289..d9b35df33806 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_benchmark.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_benchmark.c
@@ -40,7 +40,7 @@ static int amdgpu_benchmark_do_move(struct amdgpu_device *adev, unsigned size,
 	for (i = 0; i < n; i++) {
 		struct amdgpu_ring *ring = adev->mman.buffer_funcs_ring;
 		r = amdgpu_copy_buffer(ring, saddr, daddr, size, NULL, &fence,
-				       false, false);
+				       false, false, false);
 		if (r)
 			goto exit_do_move;
 		r = dma_fence_wait(fence, false);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c
index 031b094607bd..78ac6dbe70d8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c
@@ -60,8 +60,6 @@ static uint32_t amdgpu_cgs_read_ind_register(struct cgs_device *cgs_device,
 {
 	CGS_FUNC_ADEV;
 	switch (space) {
-	case CGS_IND_REG__MMIO:
-		return RREG32_IDX(index);
 	case CGS_IND_REG__PCIE:
 		return RREG32_PCIE(index);
 	case CGS_IND_REG__SMC:
@@ -77,6 +75,8 @@ static uint32_t amdgpu_cgs_read_ind_register(struct cgs_device *cgs_device,
 	case CGS_IND_REG__AUDIO_ENDPT:
 		DRM_ERROR("audio endpt register access not implemented.\n");
 		return 0;
+	default:
+		BUG();
 	}
 	WARN(1, "Invalid indirect register space");
 	return 0;
@@ -88,8 +88,6 @@ static void amdgpu_cgs_write_ind_register(struct cgs_device *cgs_device,
 {
 	CGS_FUNC_ADEV;
 	switch (space) {
-	case CGS_IND_REG__MMIO:
-		return WREG32_IDX(index, value);
 	case CGS_IND_REG__PCIE:
 		return WREG32_PCIE(index, value);
 	case CGS_IND_REG__SMC:
@@ -105,6 +103,8 @@ static void amdgpu_cgs_write_ind_register(struct cgs_device *cgs_device,
 	case CGS_IND_REG__AUDIO_ENDPT:
 		DRM_ERROR("audio endpt register access not implemented.\n");
 		return;
+	default:
+		BUG();
 	}
 	WARN(1, "Invalid indirect register space");
 }
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
index af91627b19b0..7653f62b1b2d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
@@ -924,7 +924,8 @@ static int amdgpu_cs_ib_fill(struct amdgpu_device *adev,
 
 		ring = to_amdgpu_ring(entity->rq->sched);
 		r =  amdgpu_ib_get(adev, vm, ring->funcs->parse_cs ?
-				   chunk_ib->ib_bytes : 0, ib);
+				   chunk_ib->ib_bytes : 0,
+				   AMDGPU_IB_POOL_DELAYED, ib);
 		if (r) {
 			DRM_ERROR("Failed to get ib !\n");
 			return r;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c
index 6ed36a2c5f73..8842c55d4490 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c
@@ -26,6 +26,7 @@
 #include "amdgpu.h"
 #include "amdgpu_sched.h"
 #include "amdgpu_ras.h"
+#include <linux/nospec.h>
 
 #define to_amdgpu_ctx_entity(e)	\
 	container_of((e), struct amdgpu_ctx_entity, entity)
@@ -72,13 +73,30 @@ static enum gfx_pipe_priority amdgpu_ctx_sched_prio_to_compute_prio(enum drm_sch
 	}
 }
 
-static int amdgpu_ctx_init_entity(struct amdgpu_ctx *ctx, const u32 hw_ip, const u32 ring)
+static unsigned int amdgpu_ctx_prio_sched_to_hw(struct amdgpu_device *adev,
+						 enum drm_sched_priority prio,
+						 u32 hw_ip)
+{
+	unsigned int hw_prio;
+
+	hw_prio = (hw_ip == AMDGPU_HW_IP_COMPUTE) ?
+			amdgpu_ctx_sched_prio_to_compute_prio(prio) :
+			AMDGPU_RING_PRIO_DEFAULT;
+	hw_ip = array_index_nospec(hw_ip, AMDGPU_HW_IP_NUM);
+	if (adev->gpu_sched[hw_ip][hw_prio].num_scheds == 0)
+		hw_prio = AMDGPU_RING_PRIO_DEFAULT;
+
+	return hw_prio;
+}
+
+static int amdgpu_ctx_init_entity(struct amdgpu_ctx *ctx, u32 hw_ip,
+				   const u32 ring)
 {
 	struct amdgpu_device *adev = ctx->adev;
 	struct amdgpu_ctx_entity *entity;
 	struct drm_gpu_scheduler **scheds = NULL, *sched = NULL;
 	unsigned num_scheds = 0;
-	enum gfx_pipe_priority hw_prio;
+	unsigned int hw_prio;
 	enum drm_sched_priority priority;
 	int r;
 
@@ -90,52 +108,16 @@ static int amdgpu_ctx_init_entity(struct amdgpu_ctx *ctx, const u32 hw_ip, const
 	entity->sequence = 1;
 	priority = (ctx->override_priority == DRM_SCHED_PRIORITY_UNSET) ?
 				ctx->init_priority : ctx->override_priority;
-	switch (hw_ip) {
-	case AMDGPU_HW_IP_GFX:
-		sched = &adev->gfx.gfx_ring[0].sched;
-		scheds = &sched;
-		num_scheds = 1;
-		break;
-	case AMDGPU_HW_IP_COMPUTE:
-		hw_prio = amdgpu_ctx_sched_prio_to_compute_prio(priority);
-		scheds = adev->gfx.compute_prio_sched[hw_prio];
-		num_scheds = adev->gfx.num_compute_sched[hw_prio];
-		break;
-	case AMDGPU_HW_IP_DMA:
-		scheds = adev->sdma.sdma_sched;
-		num_scheds = adev->sdma.num_sdma_sched;
-		break;
-	case AMDGPU_HW_IP_UVD:
-		sched = &adev->uvd.inst[0].ring.sched;
-		scheds = &sched;
-		num_scheds = 1;
-		break;
-	case AMDGPU_HW_IP_VCE:
-		sched = &adev->vce.ring[0].sched;
-		scheds = &sched;
-		num_scheds = 1;
-		break;
-	case AMDGPU_HW_IP_UVD_ENC:
-		sched = &adev->uvd.inst[0].ring_enc[0].sched;
-		scheds = &sched;
-		num_scheds = 1;
-		break;
-	case AMDGPU_HW_IP_VCN_DEC:
-		sched = drm_sched_pick_best(adev->vcn.vcn_dec_sched,
-					    adev->vcn.num_vcn_dec_sched);
-		scheds = &sched;
-		num_scheds = 1;
-		break;
-	case AMDGPU_HW_IP_VCN_ENC:
-		sched = drm_sched_pick_best(adev->vcn.vcn_enc_sched,
-					    adev->vcn.num_vcn_enc_sched);
+	hw_prio = amdgpu_ctx_prio_sched_to_hw(adev, priority, hw_ip);
+
+	hw_ip = array_index_nospec(hw_ip, AMDGPU_HW_IP_NUM);
+	scheds = adev->gpu_sched[hw_ip][hw_prio].sched;
+	num_scheds = adev->gpu_sched[hw_ip][hw_prio].num_scheds;
+
+	if (hw_ip == AMDGPU_HW_IP_VCN_ENC || hw_ip == AMDGPU_HW_IP_VCN_DEC) {
+		sched = drm_sched_pick_best(scheds, num_scheds);
 		scheds = &sched;
 		num_scheds = 1;
-		break;
-	case AMDGPU_HW_IP_VCN_JPEG:
-		scheds = adev->jpeg.jpeg_sched;
-		num_scheds =  adev->jpeg.num_jpeg_sched;
-		break;
 	}
 
 	r = drm_sched_entity_init(&entity->entity, priority, scheds, num_scheds,
@@ -178,7 +160,6 @@ static int amdgpu_ctx_init(struct amdgpu_device *adev,
 	ctx->override_priority = DRM_SCHED_PRIORITY_UNSET;
 
 	return 0;
-
 }
 
 static void amdgpu_ctx_fini_entity(struct amdgpu_ctx_entity *entity)
@@ -525,7 +506,7 @@ static void amdgpu_ctx_set_entity_priority(struct amdgpu_ctx *ctx,
 					    enum drm_sched_priority priority)
 {
 	struct amdgpu_device *adev = ctx->adev;
-	enum gfx_pipe_priority hw_prio;
+	unsigned int hw_prio;
 	struct drm_gpu_scheduler **scheds = NULL;
 	unsigned num_scheds;
 
@@ -534,9 +515,11 @@ static void amdgpu_ctx_set_entity_priority(struct amdgpu_ctx *ctx,
 
 	/* set hw priority */
 	if (hw_ip == AMDGPU_HW_IP_COMPUTE) {
-		hw_prio = amdgpu_ctx_sched_prio_to_compute_prio(priority);
-		scheds = adev->gfx.compute_prio_sched[hw_prio];
-		num_scheds = adev->gfx.num_compute_sched[hw_prio];
+		hw_prio = amdgpu_ctx_prio_sched_to_hw(adev, priority,
+						      AMDGPU_HW_IP_COMPUTE);
+		hw_prio = array_index_nospec(hw_prio, AMDGPU_RING_PRIO_MAX);
+		scheds = adev->gpu_sched[hw_ip][hw_prio].sched;
+		num_scheds = adev->gpu_sched[hw_ip][hw_prio].num_scheds;
 		drm_sched_entity_modify_sched(&aentity->entity, scheds,
 					      num_scheds);
 	}
@@ -665,78 +648,3 @@ void amdgpu_ctx_mgr_fini(struct amdgpu_ctx_mgr *mgr)
 	idr_destroy(&mgr->ctx_handles);
 	mutex_destroy(&mgr->lock);
 }
-
-
-static void amdgpu_ctx_init_compute_sched(struct amdgpu_device *adev)
-{
-	int num_compute_sched_normal = 0;
-	int num_compute_sched_high = AMDGPU_MAX_COMPUTE_RINGS - 1;
-	int i;
-
-	/* use one drm sched array, gfx.compute_sched to store both high and
-	 * normal priority drm compute schedulers */
-	for (i = 0; i < adev->gfx.num_compute_rings; i++) {
-		if (!adev->gfx.compute_ring[i].has_high_prio)
-			adev->gfx.compute_sched[num_compute_sched_normal++] =
-				&adev->gfx.compute_ring[i].sched;
-		else
-			adev->gfx.compute_sched[num_compute_sched_high--] =
-				&adev->gfx.compute_ring[i].sched;
-	}
-
-	/* compute ring only has two priority for now */
-	i = AMDGPU_GFX_PIPE_PRIO_NORMAL;
-	adev->gfx.compute_prio_sched[i] = &adev->gfx.compute_sched[0];
-	adev->gfx.num_compute_sched[i] = num_compute_sched_normal;
-
-	i = AMDGPU_GFX_PIPE_PRIO_HIGH;
-	if (num_compute_sched_high == (AMDGPU_MAX_COMPUTE_RINGS - 1)) {
-		/* When compute has no high priority rings then use */
-		/* normal priority sched array */
-		adev->gfx.compute_prio_sched[i] = &adev->gfx.compute_sched[0];
-		adev->gfx.num_compute_sched[i] = num_compute_sched_normal;
-	} else {
-		adev->gfx.compute_prio_sched[i] =
-			&adev->gfx.compute_sched[num_compute_sched_high - 1];
-		adev->gfx.num_compute_sched[i] =
-			adev->gfx.num_compute_rings - num_compute_sched_normal;
-	}
-}
-
-void amdgpu_ctx_init_sched(struct amdgpu_device *adev)
-{
-	int i, j;
-
-	amdgpu_ctx_init_compute_sched(adev);
-	for (i = 0; i < adev->gfx.num_gfx_rings; i++) {
-		adev->gfx.gfx_sched[i] = &adev->gfx.gfx_ring[i].sched;
-		adev->gfx.num_gfx_sched++;
-	}
-
-	for (i = 0; i < adev->sdma.num_instances; i++) {
-		adev->sdma.sdma_sched[i] = &adev->sdma.instance[i].ring.sched;
-		adev->sdma.num_sdma_sched++;
-	}
-
-	for (i = 0; i < adev->vcn.num_vcn_inst; ++i) {
-		if (adev->vcn.harvest_config & (1 << i))
-			continue;
-		adev->vcn.vcn_dec_sched[adev->vcn.num_vcn_dec_sched++] =
-			&adev->vcn.inst[i].ring_dec.sched;
-	}
-
-	for (i = 0; i < adev->vcn.num_vcn_inst; ++i) {
-		if (adev->vcn.harvest_config & (1 << i))
-			continue;
-		for (j = 0; j < adev->vcn.num_enc_rings; ++j)
-			adev->vcn.vcn_enc_sched[adev->vcn.num_vcn_enc_sched++] =
-				&adev->vcn.inst[i].ring_enc[j].sched;
-	}
-
-	for (i = 0; i < adev->jpeg.num_jpeg_inst; ++i) {
-		if (adev->jpeg.harvest_config & (1 << i))
-			continue;
-		adev->jpeg.jpeg_sched[adev->jpeg.num_jpeg_sched++] =
-			&adev->jpeg.inst[i].ring_dec.sched;
-	}
-}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h
index de490f183af2..f54e10314661 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h
@@ -88,7 +88,4 @@ void amdgpu_ctx_mgr_entity_fini(struct amdgpu_ctx_mgr *mgr);
 long amdgpu_ctx_mgr_entity_flush(struct amdgpu_ctx_mgr *mgr, long timeout);
 void amdgpu_ctx_mgr_fini(struct amdgpu_ctx_mgr *mgr);
 
-void amdgpu_ctx_init_sched(struct amdgpu_device *adev);
-
-
 #endif
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
index c0f9a651dc06..1a4894fa3693 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
@@ -152,11 +152,16 @@ static int  amdgpu_debugfs_process_reg_op(bool read, struct file *f,
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	if (use_bank) {
 		if ((sh_bank != 0xFFFFFFFF && sh_bank >= adev->gfx.config.max_sh_per_se) ||
 		    (se_bank != 0xFFFFFFFF && se_bank >= adev->gfx.config.max_shader_engines)) {
 			pm_runtime_mark_last_busy(adev->ddev->dev);
 			pm_runtime_put_autosuspend(adev->ddev->dev);
+			amdgpu_virt_disable_access_debugfs(adev);
 			return -EINVAL;
 		}
 		mutex_lock(&adev->grbm_idx_mutex);
@@ -207,6 +212,7 @@ static int  amdgpu_debugfs_process_reg_op(bool read, struct file *f,
 	pm_runtime_mark_last_busy(adev->ddev->dev);
 	pm_runtime_put_autosuspend(adev->ddev->dev);
 
+	amdgpu_virt_disable_access_debugfs(adev);
 	return result;
 }
 
@@ -255,6 +261,10 @@ static ssize_t amdgpu_debugfs_regs_pcie_read(struct file *f, char __user *buf,
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	while (size) {
 		uint32_t value;
 
@@ -263,6 +273,7 @@ static ssize_t amdgpu_debugfs_regs_pcie_read(struct file *f, char __user *buf,
 		if (r) {
 			pm_runtime_mark_last_busy(adev->ddev->dev);
 			pm_runtime_put_autosuspend(adev->ddev->dev);
+			amdgpu_virt_disable_access_debugfs(adev);
 			return r;
 		}
 
@@ -275,6 +286,7 @@ static ssize_t amdgpu_debugfs_regs_pcie_read(struct file *f, char __user *buf,
 	pm_runtime_mark_last_busy(adev->ddev->dev);
 	pm_runtime_put_autosuspend(adev->ddev->dev);
 
+	amdgpu_virt_disable_access_debugfs(adev);
 	return result;
 }
 
@@ -304,6 +316,10 @@ static ssize_t amdgpu_debugfs_regs_pcie_write(struct file *f, const char __user
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	while (size) {
 		uint32_t value;
 
@@ -311,6 +327,7 @@ static ssize_t amdgpu_debugfs_regs_pcie_write(struct file *f, const char __user
 		if (r) {
 			pm_runtime_mark_last_busy(adev->ddev->dev);
 			pm_runtime_put_autosuspend(adev->ddev->dev);
+			amdgpu_virt_disable_access_debugfs(adev);
 			return r;
 		}
 
@@ -325,6 +342,7 @@ static ssize_t amdgpu_debugfs_regs_pcie_write(struct file *f, const char __user
 	pm_runtime_mark_last_busy(adev->ddev->dev);
 	pm_runtime_put_autosuspend(adev->ddev->dev);
 
+	amdgpu_virt_disable_access_debugfs(adev);
 	return result;
 }
 
@@ -354,6 +372,10 @@ static ssize_t amdgpu_debugfs_regs_didt_read(struct file *f, char __user *buf,
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	while (size) {
 		uint32_t value;
 
@@ -362,6 +384,7 @@ static ssize_t amdgpu_debugfs_regs_didt_read(struct file *f, char __user *buf,
 		if (r) {
 			pm_runtime_mark_last_busy(adev->ddev->dev);
 			pm_runtime_put_autosuspend(adev->ddev->dev);
+			amdgpu_virt_disable_access_debugfs(adev);
 			return r;
 		}
 
@@ -374,6 +397,7 @@ static ssize_t amdgpu_debugfs_regs_didt_read(struct file *f, char __user *buf,
 	pm_runtime_mark_last_busy(adev->ddev->dev);
 	pm_runtime_put_autosuspend(adev->ddev->dev);
 
+	amdgpu_virt_disable_access_debugfs(adev);
 	return result;
 }
 
@@ -403,6 +427,10 @@ static ssize_t amdgpu_debugfs_regs_didt_write(struct file *f, const char __user
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	while (size) {
 		uint32_t value;
 
@@ -410,6 +438,7 @@ static ssize_t amdgpu_debugfs_regs_didt_write(struct file *f, const char __user
 		if (r) {
 			pm_runtime_mark_last_busy(adev->ddev->dev);
 			pm_runtime_put_autosuspend(adev->ddev->dev);
+			amdgpu_virt_disable_access_debugfs(adev);
 			return r;
 		}
 
@@ -424,6 +453,7 @@ static ssize_t amdgpu_debugfs_regs_didt_write(struct file *f, const char __user
 	pm_runtime_mark_last_busy(adev->ddev->dev);
 	pm_runtime_put_autosuspend(adev->ddev->dev);
 
+	amdgpu_virt_disable_access_debugfs(adev);
 	return result;
 }
 
@@ -453,6 +483,10 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf,
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	while (size) {
 		uint32_t value;
 
@@ -461,6 +495,7 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf,
 		if (r) {
 			pm_runtime_mark_last_busy(adev->ddev->dev);
 			pm_runtime_put_autosuspend(adev->ddev->dev);
+			amdgpu_virt_disable_access_debugfs(adev);
 			return r;
 		}
 
@@ -473,6 +508,7 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf,
 	pm_runtime_mark_last_busy(adev->ddev->dev);
 	pm_runtime_put_autosuspend(adev->ddev->dev);
 
+	amdgpu_virt_disable_access_debugfs(adev);
 	return result;
 }
 
@@ -502,6 +538,10 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user *
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	while (size) {
 		uint32_t value;
 
@@ -509,6 +549,7 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user *
 		if (r) {
 			pm_runtime_mark_last_busy(adev->ddev->dev);
 			pm_runtime_put_autosuspend(adev->ddev->dev);
+			amdgpu_virt_disable_access_debugfs(adev);
 			return r;
 		}
 
@@ -523,6 +564,7 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user *
 	pm_runtime_mark_last_busy(adev->ddev->dev);
 	pm_runtime_put_autosuspend(adev->ddev->dev);
 
+	amdgpu_virt_disable_access_debugfs(adev);
 	return result;
 }
 
@@ -651,16 +693,24 @@ static ssize_t amdgpu_debugfs_sensor_read(struct file *f, char __user *buf,
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	r = amdgpu_dpm_read_sensor(adev, idx, &values[0], &valuesize);
 
 	pm_runtime_mark_last_busy(adev->ddev->dev);
 	pm_runtime_put_autosuspend(adev->ddev->dev);
 
-	if (r)
+	if (r) {
+		amdgpu_virt_disable_access_debugfs(adev);
 		return r;
+	}
 
-	if (size > valuesize)
+	if (size > valuesize) {
+		amdgpu_virt_disable_access_debugfs(adev);
 		return -EINVAL;
+	}
 
 	outsize = 0;
 	x = 0;
@@ -673,6 +723,7 @@ static ssize_t amdgpu_debugfs_sensor_read(struct file *f, char __user *buf,
 		}
 	}
 
+	amdgpu_virt_disable_access_debugfs(adev);
 	return !r ? outsize : r;
 }
 
@@ -720,6 +771,10 @@ static ssize_t amdgpu_debugfs_wave_read(struct file *f, char __user *buf,
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	/* switch to the specific se/sh/cu */
 	mutex_lock(&adev->grbm_idx_mutex);
 	amdgpu_gfx_select_se_sh(adev, se, sh, cu);
@@ -734,16 +789,20 @@ static ssize_t amdgpu_debugfs_wave_read(struct file *f, char __user *buf,
 	pm_runtime_mark_last_busy(adev->ddev->dev);
 	pm_runtime_put_autosuspend(adev->ddev->dev);
 
-	if (!x)
+	if (!x) {
+		amdgpu_virt_disable_access_debugfs(adev);
 		return -EINVAL;
+	}
 
 	while (size && (offset < x * 4)) {
 		uint32_t value;
 
 		value = data[offset >> 2];
 		r = put_user(value, (uint32_t *)buf);
-		if (r)
+		if (r) {
+			amdgpu_virt_disable_access_debugfs(adev);
 			return r;
+		}
 
 		result += 4;
 		buf += 4;
@@ -751,6 +810,7 @@ static ssize_t amdgpu_debugfs_wave_read(struct file *f, char __user *buf,
 		size -= 4;
 	}
 
+	amdgpu_virt_disable_access_debugfs(adev);
 	return result;
 }
 
@@ -805,6 +865,10 @@ static ssize_t amdgpu_debugfs_gpr_read(struct file *f, char __user *buf,
 	if (r < 0)
 		return r;
 
+	r = amdgpu_virt_enable_access_debugfs(adev);
+	if (r < 0)
+		return r;
+
 	/* switch to the specific se/sh/cu */
 	mutex_lock(&adev->grbm_idx_mutex);
 	amdgpu_gfx_select_se_sh(adev, se, sh, cu);
@@ -840,6 +904,7 @@ static ssize_t amdgpu_debugfs_gpr_read(struct file *f, char __user *buf,
 
 err:
 	kfree(data);
+	amdgpu_virt_disable_access_debugfs(adev);
 	return result;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index f84f9e35a73b..b038ddbb2ece 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -64,6 +64,7 @@
 #include "amdgpu_xgmi.h"
 #include "amdgpu_ras.h"
 #include "amdgpu_pmu.h"
+#include "amdgpu_fru_eeprom.h"
 
 #include <linux/suspend.h>
 #include <drm/task_barrier.h>
@@ -137,6 +138,72 @@ static DEVICE_ATTR(pcie_replay_count, S_IRUGO,
 
 static void amdgpu_device_get_pcie_info(struct amdgpu_device *adev);
 
+/**
+ * DOC: product_name
+ *
+ * The amdgpu driver provides a sysfs API for reporting the product name
+ * for the device
+ * The file serial_number is used for this and returns the product name
+ * as returned from the FRU.
+ * NOTE: This is only available for certain server cards
+ */
+
+static ssize_t amdgpu_device_get_product_name(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct drm_device *ddev = dev_get_drvdata(dev);
+	struct amdgpu_device *adev = ddev->dev_private;
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", adev->product_name);
+}
+
+static DEVICE_ATTR(product_name, S_IRUGO,
+		amdgpu_device_get_product_name, NULL);
+
+/**
+ * DOC: product_number
+ *
+ * The amdgpu driver provides a sysfs API for reporting the part number
+ * for the device
+ * The file serial_number is used for this and returns the part number
+ * as returned from the FRU.
+ * NOTE: This is only available for certain server cards
+ */
+
+static ssize_t amdgpu_device_get_product_number(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct drm_device *ddev = dev_get_drvdata(dev);
+	struct amdgpu_device *adev = ddev->dev_private;
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", adev->product_number);
+}
+
+static DEVICE_ATTR(product_number, S_IRUGO,
+		amdgpu_device_get_product_number, NULL);
+
+/**
+ * DOC: serial_number
+ *
+ * The amdgpu driver provides a sysfs API for reporting the serial number
+ * for the device
+ * The file serial_number is used for this and returns the serial number
+ * as returned from the FRU.
+ * NOTE: This is only available for certain server cards
+ */
+
+static ssize_t amdgpu_device_get_serial_number(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct drm_device *ddev = dev_get_drvdata(dev);
+	struct amdgpu_device *adev = ddev->dev_private;
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", adev->serial);
+}
+
+static DEVICE_ATTR(serial_number, S_IRUGO,
+		amdgpu_device_get_serial_number, NULL);
+
 /**
  * amdgpu_device_supports_boco - Is the device a dGPU with HG/PX power control
  *
@@ -187,32 +254,6 @@ void amdgpu_device_vram_access(struct amdgpu_device *adev, loff_t pos,
 	uint32_t hi = ~0;
 	uint64_t last;
 
-
-#ifdef CONFIG_64BIT
-	last = min(pos + size, adev->gmc.visible_vram_size);
-	if (last > pos) {
-		void __iomem *addr = adev->mman.aper_base_kaddr + pos;
-		size_t count = last - pos;
-
-		if (write) {
-			memcpy_toio(addr, buf, count);
-			mb();
-			amdgpu_asic_flush_hdp(adev, NULL);
-		} else {
-			amdgpu_asic_invalidate_hdp(adev, NULL);
-			mb();
-			memcpy_fromio(buf, addr, count);
-		}
-
-		if (count == size)
-			return;
-
-		pos += count;
-		buf += count / 4;
-		size -= count;
-	}
-#endif
-
 	spin_lock_irqsave(&adev->mmio_idx_lock, flags);
 	for (last = pos + size; pos < last; pos += 4) {
 		uint32_t tmp = pos >> 31;
@@ -231,10 +272,10 @@ void amdgpu_device_vram_access(struct amdgpu_device *adev, loff_t pos,
 }
 
 /*
- * MMIO register access helper functions.
+ * device register access helper functions.
  */
 /**
- * amdgpu_mm_rreg - read a memory mapped IO register
+ * amdgpu_device_rreg - read a register
  *
  * @adev: amdgpu_device pointer
  * @reg: dword aligned register offset
@@ -242,25 +283,19 @@ void amdgpu_device_vram_access(struct amdgpu_device *adev, loff_t pos,
  *
  * Returns the 32 bit value from the offset specified.
  */
-uint32_t amdgpu_mm_rreg(struct amdgpu_device *adev, uint32_t reg,
-			uint32_t acc_flags)
+uint32_t amdgpu_device_rreg(struct amdgpu_device *adev, uint32_t reg,
+			    uint32_t acc_flags)
 {
 	uint32_t ret;
 
-	if ((acc_flags & AMDGPU_REGS_KIQ) || (!(acc_flags & AMDGPU_REGS_NO_KIQ) && amdgpu_sriov_runtime(adev)))
+	if (!(acc_flags & AMDGPU_REGS_NO_KIQ) && amdgpu_sriov_runtime(adev))
 		return amdgpu_kiq_rreg(adev, reg);
 
-	if ((reg * 4) < adev->rmmio_size && !(acc_flags & AMDGPU_REGS_IDX))
+	if ((reg * 4) < adev->rmmio_size)
 		ret = readl(((void __iomem *)adev->rmmio) + (reg * 4));
-	else {
-		unsigned long flags;
-
-		spin_lock_irqsave(&adev->mmio_idx_lock, flags);
-		writel((reg * 4), ((void __iomem *)adev->rmmio) + (mmMM_INDEX * 4));
-		ret = readl(((void __iomem *)adev->rmmio) + (mmMM_DATA * 4));
-		spin_unlock_irqrestore(&adev->mmio_idx_lock, flags);
-	}
-	trace_amdgpu_mm_rreg(adev->pdev->device, reg, ret);
+	else
+		ret = adev->pcie_rreg(adev, (reg * 4));
+	trace_amdgpu_device_rreg(adev->pdev->device, reg, ret);
 	return ret;
 }
 
@@ -306,28 +341,19 @@ void amdgpu_mm_wreg8(struct amdgpu_device *adev, uint32_t offset, uint8_t value)
 		BUG();
 }
 
-void static inline amdgpu_mm_wreg_mmio(struct amdgpu_device *adev, uint32_t reg, uint32_t v, uint32_t acc_flags)
+void static inline amdgpu_device_wreg_no_kiq(struct amdgpu_device *adev, uint32_t reg,
+					     uint32_t v, uint32_t acc_flags)
 {
-	trace_amdgpu_mm_wreg(adev->pdev->device, reg, v);
+	trace_amdgpu_device_wreg(adev->pdev->device, reg, v);
 
-	if ((reg * 4) < adev->rmmio_size && !(acc_flags & AMDGPU_REGS_IDX))
+	if ((reg * 4) < adev->rmmio_size)
 		writel(v, ((void __iomem *)adev->rmmio) + (reg * 4));
-	else {
-		unsigned long flags;
-
-		spin_lock_irqsave(&adev->mmio_idx_lock, flags);
-		writel((reg * 4), ((void __iomem *)adev->rmmio) + (mmMM_INDEX * 4));
-		writel(v, ((void __iomem *)adev->rmmio) + (mmMM_DATA * 4));
-		spin_unlock_irqrestore(&adev->mmio_idx_lock, flags);
-	}
-
-	if (adev->asic_type >= CHIP_VEGA10 && reg == 1 && adev->last_mm_index == 0x5702C) {
-		udelay(500);
-	}
+	else
+		adev->pcie_wreg(adev, (reg * 4), v);
 }
 
 /**
- * amdgpu_mm_wreg - write to a memory mapped IO register
+ * amdgpu_device_wreg - write to a register
  *
  * @adev: amdgpu_device pointer
  * @reg: dword aligned register offset
@@ -336,17 +362,13 @@ void static inline amdgpu_mm_wreg_mmio(struct amdgpu_device *adev, uint32_t reg,
  *
  * Writes the value specified to the offset specified.
  */
-void amdgpu_mm_wreg(struct amdgpu_device *adev, uint32_t reg, uint32_t v,
-		    uint32_t acc_flags)
+void amdgpu_device_wreg(struct amdgpu_device *adev, uint32_t reg, uint32_t v,
+			uint32_t acc_flags)
 {
-	if (adev->asic_type >= CHIP_VEGA10 && reg == 0) {
-		adev->last_mm_index = v;
-	}
-
-	if ((acc_flags & AMDGPU_REGS_KIQ) || (!(acc_flags & AMDGPU_REGS_NO_KIQ) && amdgpu_sriov_runtime(adev)))
+	if (!(acc_flags & AMDGPU_REGS_NO_KIQ) && amdgpu_sriov_runtime(adev))
 		return amdgpu_kiq_wreg(adev, reg, v);
 
-	amdgpu_mm_wreg_mmio(adev, reg, v, acc_flags);
+	amdgpu_device_wreg_no_kiq(adev, reg, v, acc_flags);
 }
 
 /*
@@ -365,7 +387,7 @@ void amdgpu_mm_wreg_mmio_rlc(struct amdgpu_device *adev, uint32_t reg, uint32_t
 			return adev->gfx.rlc.funcs->rlcg_wreg(adev, reg, v);
 	}
 
-	amdgpu_mm_wreg_mmio(adev, reg, v, acc_flags);
+	amdgpu_device_wreg_no_kiq(adev, reg, v, acc_flags);
 }
 
 /**
@@ -397,20 +419,12 @@ u32 amdgpu_io_rreg(struct amdgpu_device *adev, u32 reg)
  */
 void amdgpu_io_wreg(struct amdgpu_device *adev, u32 reg, u32 v)
 {
-	if (adev->asic_type >= CHIP_VEGA10 && reg == 0) {
-		adev->last_mm_index = v;
-	}
-
 	if ((reg * 4) < adev->rio_mem_size)
 		iowrite32(v, adev->rio_mem + (reg * 4));
 	else {
 		iowrite32((reg * 4), adev->rio_mem + (mmMM_INDEX * 4));
 		iowrite32(v, adev->rio_mem + (mmMM_DATA * 4));
 	}
-
-	if (adev->asic_type >= CHIP_VEGA10 && reg == 1 && adev->last_mm_index == 0x5702C) {
-		udelay(500);
-	}
 }
 
 /**
@@ -1126,6 +1140,8 @@ static int amdgpu_device_check_arguments(struct amdgpu_device *adev)
 
 	adev->firmware.load_type = amdgpu_ucode_get_load_type(adev, amdgpu_fw_load_type);
 
+	amdgpu_gmc_tmz_set(adev);
+
 	return 0;
 }
 
@@ -1147,7 +1163,7 @@ static void amdgpu_switcheroo_set_state(struct pci_dev *pdev, enum vga_switchero
 		return;
 
 	if (state == VGA_SWITCHEROO_ON) {
-		pr_info("amdgpu: switched on\n");
+		pr_info("switched on\n");
 		/* don't suspend or resume card normally */
 		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
 
@@ -1161,7 +1177,7 @@ static void amdgpu_switcheroo_set_state(struct pci_dev *pdev, enum vga_switchero
 		dev->switch_power_state = DRM_SWITCH_POWER_ON;
 		drm_kms_helper_poll_enable(dev);
 	} else {
-		pr_info("amdgpu: switched off\n");
+		pr_info("switched off\n");
 		drm_kms_helper_poll_disable(dev);
 		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
 		amdgpu_device_suspend(dev, true);
@@ -1731,9 +1747,28 @@ static int amdgpu_device_ip_early_init(struct amdgpu_device *adev)
 	amdgpu_amdkfd_device_probe(adev);
 
 	if (amdgpu_sriov_vf(adev)) {
+		/* handle vbios stuff prior full access mode for new handshake */
+		if (adev->virt.req_init_data_ver == 1) {
+			if (!amdgpu_get_bios(adev)) {
+				DRM_ERROR("failed to get vbios\n");
+				return -EINVAL;
+			}
+
+			r = amdgpu_atombios_init(adev);
+			if (r) {
+				dev_err(adev->dev, "amdgpu_atombios_init failed\n");
+				amdgpu_vf_error_put(adev, AMDGIM_ERROR_VF_ATOMBIOS_INIT_FAIL, 0, 0);
+				return r;
+			}
+		}
+	}
+
+	/* we need to send REQ_GPU here for legacy handshaker otherwise the vbios
+	 * will not be prepared by host for this VF */
+	if (amdgpu_sriov_vf(adev) && adev->virt.req_init_data_ver < 1) {
 		r = amdgpu_virt_request_full_gpu(adev, true);
 		if (r)
-			return -EAGAIN;
+			return r;
 	}
 
 	adev->pm.pp_feature = amdgpu_pp_feature_mask;
@@ -1763,6 +1798,10 @@ static int amdgpu_device_ip_early_init(struct amdgpu_device *adev)
 		}
 		/* get the vbios after the asic_funcs are set up */
 		if (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_COMMON) {
+			/* skip vbios handling for new handshake */
+			if (amdgpu_sriov_vf(adev) && adev->virt.req_init_data_ver == 1)
+				continue;
+
 			/* Read BIOS */
 			if (!amdgpu_get_bios(adev))
 				return -EINVAL;
@@ -1889,6 +1928,12 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev)
 	if (r)
 		return r;
 
+	if (amdgpu_sriov_vf(adev) && adev->virt.req_init_data_ver > 0) {
+		r = amdgpu_virt_request_full_gpu(adev, true);
+		if (r)
+			return -EAGAIN;
+	}
+
 	for (i = 0; i < adev->num_ip_blocks; i++) {
 		if (!adev->ip_blocks[i].status.valid)
 			continue;
@@ -1975,6 +2020,8 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev)
 		amdgpu_xgmi_add_device(adev);
 	amdgpu_amdkfd_device_init(adev);
 
+	amdgpu_fru_get_product_info(adev);
+
 init_failed:
 	if (amdgpu_sriov_vf(adev))
 		amdgpu_virt_release_full_gpu(adev, true);
@@ -2171,6 +2218,8 @@ static int amdgpu_device_ip_late_init(struct amdgpu_device *adev)
 		adev->ip_blocks[i].status.late_initialized = true;
 	}
 
+	amdgpu_ras_set_error_query_ready(adev, true);
+
 	amdgpu_device_set_cg_state(adev, AMD_CG_STATE_GATE);
 	amdgpu_device_set_pg_state(adev, AMD_PG_STATE_GATE);
 
@@ -2203,7 +2252,8 @@ static int amdgpu_device_ip_late_init(struct amdgpu_device *adev)
 				if (gpu_instance->adev->flags & AMD_IS_APU)
 					continue;
 
-				r = amdgpu_xgmi_set_pstate(gpu_instance->adev, 0);
+				r = amdgpu_xgmi_set_pstate(gpu_instance->adev,
+						AMDGPU_XGMI_PSTATE_MIN);
 				if (r) {
 					DRM_ERROR("pstate setting failed (%d).\n", r);
 					break;
@@ -2785,12 +2835,12 @@ static int amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
 	 * By default timeout for non compute jobs is 10000.
 	 * And there is no timeout enforced on compute jobs.
 	 * In SR-IOV or passthrough mode, timeout for compute
-	 * jobs are 10000 by default.
+	 * jobs are 60000 by default.
 	 */
 	adev->gfx_timeout = msecs_to_jiffies(10000);
 	adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout;
 	if (amdgpu_sriov_vf(adev) || amdgpu_passthrough(adev))
-		adev->compute_timeout = adev->gfx_timeout;
+		adev->compute_timeout =  msecs_to_jiffies(60000);
 	else
 		adev->compute_timeout = MAX_SCHEDULE_TIMEOUT;
 
@@ -2942,9 +2992,6 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 	INIT_LIST_HEAD(&adev->shadow_list);
 	mutex_init(&adev->shadow_list_lock);
 
-	INIT_LIST_HEAD(&adev->ring_lru_list);
-	spin_lock_init(&adev->ring_lru_list_lock);
-
 	INIT_DELAYED_WORK(&adev->delayed_init_work,
 			  amdgpu_device_delayed_init_work_handler);
 	INIT_DELAYED_WORK(&adev->gfx.gfx_off_delay_work,
@@ -2953,7 +3000,7 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 	INIT_WORK(&adev->xgmi_reset_work, amdgpu_device_xgmi_reset_func);
 
 	adev->gfx.gfx_off_req_count = 1;
-	adev->pm.ac_power = power_supply_is_system_supplied() > 0 ? true : false;
+	adev->pm.ac_power = power_supply_is_system_supplied() > 0;
 
 	/* Registers mapping */
 	/* TODO: block userspace mapping of io register */
@@ -3002,18 +3049,8 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 	if (amdgpu_mes && adev->asic_type >= CHIP_NAVI10)
 		adev->enable_mes = true;
 
-	if (amdgpu_discovery && adev->asic_type >= CHIP_NAVI10) {
-		r = amdgpu_discovery_init(adev);
-		if (r) {
-			dev_err(adev->dev, "amdgpu_discovery_init failed\n");
-			return r;
-		}
-	}
-
-	/* early init functions */
-	r = amdgpu_device_ip_early_init(adev);
-	if (r)
-		return r;
+	/* detect hw virtualization here */
+	amdgpu_detect_virtualization(adev);
 
 	r = amdgpu_device_get_job_timeout_settings(adev);
 	if (r) {
@@ -3021,6 +3058,11 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 		return r;
 	}
 
+	/* early init functions */
+	r = amdgpu_device_ip_early_init(adev);
+	if (r)
+		return r;
+
 	/* doorbell bar mapping and doorbell index init*/
 	amdgpu_device_doorbell_init(adev);
 
@@ -3127,14 +3169,13 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 		goto failed;
 	}
 
-	DRM_DEBUG("SE %d, SH per SE %d, CU per SH %d, active_cu_number %d\n",
+	dev_info(adev->dev,
+		"SE %d, SH per SE %d, CU per SH %d, active_cu_number %d\n",
 			adev->gfx.config.max_shader_engines,
 			adev->gfx.config.max_sh_per_se,
 			adev->gfx.config.max_cu_per_sh,
 			adev->gfx.cu_info.number);
 
-	amdgpu_ctx_init_sched(adev);
-
 	adev->accel_working = true;
 
 	amdgpu_vm_check_compute_bug(adev);
@@ -3205,6 +3246,24 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 		return r;
 	}
 
+	r = device_create_file(adev->dev, &dev_attr_product_name);
+	if (r) {
+		dev_err(adev->dev, "Could not create product_name");
+		return r;
+	}
+
+	r = device_create_file(adev->dev, &dev_attr_product_number);
+	if (r) {
+		dev_err(adev->dev, "Could not create product_number");
+		return r;
+	}
+
+	r = device_create_file(adev->dev, &dev_attr_serial_number);
+	if (r) {
+		dev_err(adev->dev, "Could not create serial_number");
+		return r;
+	}
+
 	if (IS_ENABLED(CONFIG_PERF_EVENTS))
 		r = amdgpu_pmu_init(adev);
 	if (r)
@@ -3287,6 +3346,9 @@ void amdgpu_device_fini(struct amdgpu_device *adev)
 	device_remove_file(adev->dev, &dev_attr_pcie_replay_count);
 	if (adev->ucode_sysfs_en)
 		amdgpu_ucode_sysfs_fini(adev);
+	device_remove_file(adev->dev, &dev_attr_product_name);
+	device_remove_file(adev->dev, &dev_attr_product_number);
+	device_remove_file(adev->dev, &dev_attr_serial_number);
 	if (IS_ENABLED(CONFIG_PERF_EVENTS))
 		amdgpu_pmu_fini(adev);
 	if (amdgpu_discovery && adev->asic_type >= CHIP_NAVI10)
@@ -3372,15 +3434,12 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon)
 		}
 	}
 
-	amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE);
-	amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE);
-
-	amdgpu_amdkfd_suspend(adev, !fbcon);
-
 	amdgpu_ras_suspend(adev);
 
 	r = amdgpu_device_ip_suspend_phase1(adev);
 
+	amdgpu_amdkfd_suspend(adev, !fbcon);
+
 	/* evict vram memory */
 	amdgpu_bo_evict_vram(adev);
 
@@ -3757,6 +3816,8 @@ static int amdgpu_device_reset_sriov(struct amdgpu_device *adev,
 	if (r)
 		return r;
 
+	amdgpu_amdkfd_pre_reset(adev);
+
 	/* Resume IP prior to SMC */
 	r = amdgpu_device_ip_reinit_early_sriov(adev);
 	if (r)
@@ -4070,7 +4131,8 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 			      struct amdgpu_job *job)
 {
 	struct list_head device_list, *device_list_handle =  NULL;
-	bool need_full_reset, job_signaled;
+	bool need_full_reset = false;
+	bool job_signaled = false;
 	struct amdgpu_hive_info *hive = NULL;
 	struct amdgpu_device *tmp_adev = NULL;
 	int i, r = 0;
@@ -4091,16 +4153,9 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 		emergency_restart();
 	}
 
-	need_full_reset = job_signaled = false;
-	INIT_LIST_HEAD(&device_list);
-
 	dev_info(adev->dev, "GPU %s begin!\n",
 		(in_ras_intr && !use_baco) ? "jobs stop":"reset");
 
-	cancel_delayed_work_sync(&adev->delayed_init_work);
-
-	hive = amdgpu_get_xgmi_hive(adev, false);
-
 	/*
 	 * Here we trylock to avoid chain of resets executing from
 	 * either trigger by jobs on different adevs in XGMI hive or jobs on
@@ -4108,39 +4163,25 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 	 * We always reset all schedulers for device and all devices for XGMI
 	 * hive so that should take care of them too.
 	 */
-
+	hive = amdgpu_get_xgmi_hive(adev, true);
 	if (hive && !mutex_trylock(&hive->reset_lock)) {
 		DRM_INFO("Bailing on TDR for s_job:%llx, hive: %llx as another already in progress",
 			  job ? job->base.id : -1, hive->hive_id);
+		mutex_unlock(&hive->hive_lock);
 		return 0;
 	}
 
-	/* Start with adev pre asic reset first for soft reset check.*/
-	if (!amdgpu_device_lock_adev(adev, !hive)) {
-		DRM_INFO("Bailing on TDR for s_job:%llx, as another already in progress",
-			  job ? job->base.id : -1);
-		return 0;
-	}
-
-	/* Block kfd: SRIOV would do it separately */
-	if (!amdgpu_sriov_vf(adev))
-                amdgpu_amdkfd_pre_reset(adev);
-
-	/* Build list of devices to reset */
-	if  (adev->gmc.xgmi.num_physical_nodes > 1) {
-		if (!hive) {
-			/*unlock kfd: SRIOV would do it separately */
-			if (!amdgpu_sriov_vf(adev))
-		                amdgpu_amdkfd_post_reset(adev);
-			amdgpu_device_unlock_adev(adev);
+	/*
+	 * Build list of devices to reset.
+	 * In case we are in XGMI hive mode, resort the device list
+	 * to put adev in the 1st position.
+	 */
+	INIT_LIST_HEAD(&device_list);
+	if (adev->gmc.xgmi.num_physical_nodes > 1) {
+		if (!hive)
 			return -ENODEV;
-		}
-
-		/*
-		 * In case we are in XGMI hive mode device reset is done for all the
-		 * nodes in the hive to retrain all XGMI links and hence the reset
-		 * sequence is executed in loop on all nodes.
-		 */
+		if (!list_is_first(&adev->gmc.xgmi.head, &hive->device_list))
+			list_rotate_to_front(&adev->gmc.xgmi.head, &hive->device_list);
 		device_list_handle = &hive->device_list;
 	} else {
 		list_add_tail(&adev->gmc.xgmi.head, &device_list);
@@ -4149,19 +4190,27 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 
 	/* block all schedulers and reset given job's ring */
 	list_for_each_entry(tmp_adev, device_list_handle, gmc.xgmi.head) {
-		if (tmp_adev != adev) {
-			amdgpu_device_lock_adev(tmp_adev, false);
-			if (!amdgpu_sriov_vf(tmp_adev))
-			                amdgpu_amdkfd_pre_reset(tmp_adev);
+		if (!amdgpu_device_lock_adev(tmp_adev, !hive)) {
+			DRM_INFO("Bailing on TDR for s_job:%llx, as another already in progress",
+				  job ? job->base.id : -1);
+			mutex_unlock(&hive->hive_lock);
+			return 0;
 		}
 
+		amdgpu_ras_set_error_query_ready(tmp_adev, false);
+
+		cancel_delayed_work_sync(&tmp_adev->delayed_init_work);
+
+		if (!amdgpu_sriov_vf(tmp_adev))
+			amdgpu_amdkfd_pre_reset(tmp_adev);
+
 		/*
 		 * Mark these ASICs to be reseted as untracked first
 		 * And add them back after reset completed
 		 */
 		amdgpu_unregister_gpu_instance(tmp_adev);
 
-		amdgpu_fbdev_set_suspend(adev, 1);
+		amdgpu_fbdev_set_suspend(tmp_adev, 1);
 
 		/* disable ras on ALL IPs */
 		if (!(in_ras_intr && !use_baco) &&
@@ -4181,7 +4230,6 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 		}
 	}
 
-
 	if (in_ras_intr && !use_baco)
 		goto skip_sched_resume;
 
@@ -4192,30 +4240,14 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 	 * job->base holds a reference to parent fence
 	 */
 	if (job && job->base.s_fence->parent &&
-	    dma_fence_is_signaled(job->base.s_fence->parent))
+	    dma_fence_is_signaled(job->base.s_fence->parent)) {
 		job_signaled = true;
-
-	if (job_signaled) {
 		dev_info(adev->dev, "Guilty job already signaled, skipping HW reset");
 		goto skip_hw_reset;
 	}
 
-
-	/* Guilty job will be freed after this*/
-	r = amdgpu_device_pre_asic_reset(adev, job, &need_full_reset);
-	if (r) {
-		/*TODO Should we stop ?*/
-		DRM_ERROR("GPU pre asic reset failed with err, %d for drm dev, %s ",
-			  r, adev->ddev->unique);
-		adev->asic_reset_res = r;
-	}
-
 retry:	/* Rest of adevs pre asic reset from XGMI hive. */
 	list_for_each_entry(tmp_adev, device_list_handle, gmc.xgmi.head) {
-
-		if (tmp_adev == adev)
-			continue;
-
 		r = amdgpu_device_pre_asic_reset(tmp_adev,
 						 NULL,
 						 &need_full_reset);
@@ -4280,8 +4312,10 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 		amdgpu_device_unlock_adev(tmp_adev);
 	}
 
-	if (hive)
+	if (hive) {
 		mutex_unlock(&hive->reset_lock);
+		mutex_unlock(&hive->hive_lock);
+	}
 
 	if (r)
 		dev_info(adev->dev, "GPU reset end with ret = %d\n", r);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
index 27d8ae19a7a4..43bb22ad8add 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
@@ -23,9 +23,7 @@
 
 #include "amdgpu.h"
 #include "amdgpu_discovery.h"
-#include "soc15_common.h"
 #include "soc15_hw_ip.h"
-#include "nbio/nbio_2_3_offset.h"
 #include "discovery.h"
 
 #define mmRCC_CONFIG_MEMSIZE	0xde3
@@ -158,7 +156,7 @@ static inline bool amdgpu_discovery_verify_checksum(uint8_t *data, uint32_t size
 	return !!(amdgpu_discovery_calculate_checksum(data, size) == expected);
 }
 
-int amdgpu_discovery_init(struct amdgpu_device *adev)
+static int amdgpu_discovery_init(struct amdgpu_device *adev)
 {
 	struct table_info *info;
 	struct binary_header *bhdr;
@@ -257,10 +255,12 @@ int amdgpu_discovery_reg_base_init(struct amdgpu_device *adev)
 	uint8_t num_base_address;
 	int hw_ip;
 	int i, j, k;
+	int r;
 
-	if (!adev->discovery) {
-		DRM_ERROR("ip discovery uninitialized\n");
-		return -EINVAL;
+	r = amdgpu_discovery_init(adev);
+	if (r) {
+		DRM_ERROR("amdgpu_discovery_init failed\n");
+		return r;
 	}
 
 	bhdr = (struct binary_header *)adev->discovery;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.h
index ba78e15d9b05..d50d597c45ed 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.h
@@ -26,7 +26,6 @@
 
 #define DISCOVERY_TMR_SIZE  (64 << 10)
 
-int amdgpu_discovery_init(struct amdgpu_device *adev);
 void amdgpu_discovery_fini(struct amdgpu_device *adev);
 int amdgpu_discovery_reg_base_init(struct amdgpu_device *adev);
 int amdgpu_discovery_get_ip_version(struct amdgpu_device *adev, int hw_id,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c
index ffeb20f11c07..43d8ed7dbd00 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c
@@ -38,6 +38,7 @@
 #include <drm/amdgpu_drm.h>
 #include <linux/dma-buf.h>
 #include <linux/dma-fence-array.h>
+#include <linux/pci-p2pdma.h>
 
 /**
  * amdgpu_gem_prime_vmap - &dma_buf_ops.vmap implementation
@@ -179,6 +180,9 @@ static int amdgpu_dma_buf_attach(struct dma_buf *dmabuf,
 	struct amdgpu_device *adev = amdgpu_ttm_adev(bo->tbo.bdev);
 	int r;
 
+	if (pci_p2pdma_distance_many(adev->pdev, &attach->dev, 1, true) < 0)
+		attach->peer2peer = false;
+
 	if (attach->dev->driver == adev->dev->driver)
 		return 0;
 
@@ -272,14 +276,21 @@ static struct sg_table *amdgpu_dma_buf_map(struct dma_buf_attachment *attach,
 	struct dma_buf *dma_buf = attach->dmabuf;
 	struct drm_gem_object *obj = dma_buf->priv;
 	struct amdgpu_bo *bo = gem_to_amdgpu_bo(obj);
+	struct amdgpu_device *adev = amdgpu_ttm_adev(bo->tbo.bdev);
 	struct sg_table *sgt;
 	long r;
 
 	if (!bo->pin_count) {
-		/* move buffer into GTT */
+		/* move buffer into GTT or VRAM */
 		struct ttm_operation_ctx ctx = { false, false };
+		unsigned domains = AMDGPU_GEM_DOMAIN_GTT;
 
-		amdgpu_bo_placement_from_domain(bo, AMDGPU_GEM_DOMAIN_GTT);
+		if (bo->preferred_domains & AMDGPU_GEM_DOMAIN_VRAM &&
+		    attach->peer2peer) {
+			bo->flags |= AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED;
+			domains |= AMDGPU_GEM_DOMAIN_VRAM;
+		}
+		amdgpu_bo_placement_from_domain(bo, domains);
 		r = ttm_bo_validate(&bo->tbo, &bo->placement, &ctx);
 		if (r)
 			return ERR_PTR(r);
@@ -289,20 +300,34 @@ static struct sg_table *amdgpu_dma_buf_map(struct dma_buf_attachment *attach,
 		return ERR_PTR(-EBUSY);
 	}
 
-	sgt = drm_prime_pages_to_sg(bo->tbo.ttm->pages, bo->tbo.num_pages);
-	if (IS_ERR(sgt))
-		return sgt;
-
-	if (!dma_map_sg_attrs(attach->dev, sgt->sgl, sgt->nents, dir,
-			      DMA_ATTR_SKIP_CPU_SYNC))
-		goto error_free;
+	switch (bo->tbo.mem.mem_type) {
+	case TTM_PL_TT:
+		sgt = drm_prime_pages_to_sg(bo->tbo.ttm->pages,
+					    bo->tbo.num_pages);
+		if (IS_ERR(sgt))
+			return sgt;
+
+		if (!dma_map_sg_attrs(attach->dev, sgt->sgl, sgt->nents, dir,
+				      DMA_ATTR_SKIP_CPU_SYNC))
+			goto error_free;
+		break;
+
+	case TTM_PL_VRAM:
+		r = amdgpu_vram_mgr_alloc_sgt(adev, &bo->tbo.mem, attach->dev,
+					      dir, &sgt);
+		if (r)
+			return ERR_PTR(r);
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
 
 	return sgt;
 
 error_free:
 	sg_free_table(sgt);
 	kfree(sgt);
-	return ERR_PTR(-ENOMEM);
+	return ERR_PTR(-EBUSY);
 }
 
 /**
@@ -318,9 +343,18 @@ static void amdgpu_dma_buf_unmap(struct dma_buf_attachment *attach,
 				 struct sg_table *sgt,
 				 enum dma_data_direction dir)
 {
-	dma_unmap_sg(attach->dev, sgt->sgl, sgt->nents, dir);
-	sg_free_table(sgt);
-	kfree(sgt);
+	struct dma_buf *dma_buf = attach->dmabuf;
+	struct drm_gem_object *obj = dma_buf->priv;
+	struct amdgpu_bo *bo = gem_to_amdgpu_bo(obj);
+	struct amdgpu_device *adev = amdgpu_ttm_adev(bo->tbo.bdev);
+
+	if (sgt->sgl->page_link) {
+		dma_unmap_sg(attach->dev, sgt->sgl, sgt->nents, dir);
+		sg_free_table(sgt);
+		kfree(sgt);
+	} else {
+		amdgpu_vram_mgr_free_sgt(adev, attach->dev, dir, sgt);
+	}
 }
 
 /**
@@ -514,6 +548,7 @@ amdgpu_dma_buf_move_notify(struct dma_buf_attachment *attach)
 }
 
 static const struct dma_buf_attach_ops amdgpu_dma_buf_attach_ops = {
+	.allow_peer2peer = true,
 	.move_notify = amdgpu_dma_buf_move_notify
 };
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c
index ba1bb95a3cf9..0e8018c9aa8e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c
@@ -856,7 +856,7 @@ void amdgpu_add_thermal_controller(struct amdgpu_device *adev)
 				const char *name = pp_lib_thermal_controller_names[controller->ucType];
 				info.addr = controller->ucI2cAddress >> 1;
 				strlcpy(info.type, name, sizeof(info.type));
-				i2c_new_device(&adev->pm.i2c_bus->adapter, &info);
+				i2c_new_client_device(&adev->pm.i2c_bus->adapter, &info);
 			}
 		} else {
 			DRM_INFO("Unknown thermal controller type %d at 0x%02x %s fan control\n",
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 8ea86ffdea0d..0ca396d4ebcb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -85,9 +85,11 @@
  * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
  * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
  * - 3.36.0 - Allow reading more status registers on si/cik
+ * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
+ * - 3.38.0 - Add AMDGPU_IB_FLAG_EMIT_MEM_SYNC
  */
 #define KMS_DRIVER_MAJOR	3
-#define KMS_DRIVER_MINOR	36
+#define KMS_DRIVER_MINOR	38
 #define KMS_DRIVER_PATCHLEVEL	0
 
 int amdgpu_vram_limit = 0;
@@ -144,6 +146,7 @@ int amdgpu_discovery = -1;
 int amdgpu_mes = 0;
 int amdgpu_noretry;
 int amdgpu_force_asic_type = -1;
+int amdgpu_tmz = 0;
 
 struct amdgpu_mgpu_info mgpu_info = {
 	.mutex = __MUTEX_INITIALIZER(mgpu_info.mutex),
@@ -687,13 +690,12 @@ MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (defau
 
 /**
  * DOC: hws_gws_support(bool)
- * Whether HWS support gws barriers. Default value: false (not supported)
- * This will be replaced with a MEC firmware version check once firmware
- * is ready
+ * Assume that HWS supports GWS barriers regardless of what firmware version
+ * check says. Default value: false (rely on MEC2 firmware version check).
  */
 bool hws_gws_support;
 module_param(hws_gws_support, bool, 0444);
-MODULE_PARM_DESC(hws_gws_support, "MEC FW support gws barriers (false = not supported (Default), true = supported)");
+MODULE_PARM_DESC(hws_gws_support, "Assume MEC2 FW supports GWS barriers (false = rely on FW version check (Default), true = force supported)");
 
 /**
   * DOC: queue_preemption_timeout_ms (int)
@@ -728,6 +730,16 @@ uint amdgpu_dm_abm_level = 0;
 MODULE_PARM_DESC(abmlevel, "ABM level (0 = off (default), 1-4 = backlight reduction level) ");
 module_param_named(abmlevel, amdgpu_dm_abm_level, uint, 0444);
 
+/**
+ * DOC: tmz (int)
+ * Trusted Memory Zone (TMZ) is a method to protect data being written
+ * to or read from memory.
+ *
+ * The default value: 0 (off).  TODO: change to auto till it is completed.
+ */
+MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto, 0 = off (default), 1 = on)");
+module_param_named(tmz, amdgpu_tmz, int, 0444);
+
 static const struct pci_device_id pciidlist[] = {
 #ifdef  CONFIG_DRM_AMDGPU_SI
 	{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI},
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
index 7531527067df..d878fe7fee51 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
@@ -192,14 +192,22 @@ int amdgpu_fence_emit(struct amdgpu_ring *ring, struct dma_fence **f,
  * Used For polling fence.
  * Returns 0 on success, -ENOMEM on failure.
  */
-int amdgpu_fence_emit_polling(struct amdgpu_ring *ring, uint32_t *s)
+int amdgpu_fence_emit_polling(struct amdgpu_ring *ring, uint32_t *s,
+			      uint32_t timeout)
 {
 	uint32_t seq;
+	signed long r;
 
 	if (!s)
 		return -EINVAL;
 
 	seq = ++ring->fence_drv.sync_seq;
+	r = amdgpu_fence_wait_polling(ring,
+				      seq - ring->fence_drv.num_fences_mask,
+				      timeout);
+	if (r < 1)
+		return -ETIMEDOUT;
+
 	amdgpu_ring_emit_fence(ring, ring->fence_drv.gpu_addr,
 			       seq, 0);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c
new file mode 100644
index 000000000000..815c072ac4da
--- /dev/null
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright 2019 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+#include <linux/pci.h>
+
+#include "amdgpu.h"
+#include "amdgpu_i2c.h"
+#include "smu_v11_0_i2c.h"
+#include "atom.h"
+
+#define I2C_PRODUCT_INFO_ADDR		0xAC
+#define I2C_PRODUCT_INFO_ADDR_SIZE	0x2
+#define I2C_PRODUCT_INFO_OFFSET		0xC0
+
+bool is_fru_eeprom_supported(struct amdgpu_device *adev)
+{
+	/* TODO: Gaming SKUs don't have the FRU EEPROM.
+	 * Use this hack to address hangs on modprobe on gaming SKUs
+	 * until a proper solution can be implemented by only supporting
+	 * the explicit chip IDs for VG20 Server cards
+	 *
+	 * TODO: Add list of supported Arcturus DIDs once confirmed
+	 */
+	if ((adev->asic_type == CHIP_VEGA20 && adev->pdev->device == 0x66a0) ||
+	    (adev->asic_type == CHIP_VEGA20 && adev->pdev->device == 0x66a1) ||
+	    (adev->asic_type == CHIP_VEGA20 && adev->pdev->device == 0x66a4))
+		return true;
+	return false;
+}
+
+int amdgpu_fru_read_eeprom(struct amdgpu_device *adev, uint32_t addrptr,
+			   unsigned char *buff)
+{
+	int ret, size;
+	struct i2c_msg msg = {
+			.addr   = I2C_PRODUCT_INFO_ADDR,
+			.flags  = I2C_M_RD,
+			.buf    = buff,
+	};
+	buff[0] = 0;
+	buff[1] = addrptr;
+	msg.len = I2C_PRODUCT_INFO_ADDR_SIZE + 1;
+	ret = i2c_transfer(&adev->pm.smu_i2c, &msg, 1);
+
+	if (ret < 1) {
+		DRM_WARN("FRU: Failed to get size field");
+		return ret;
+	}
+
+	/* The size returned by the i2c requires subtraction of 0xC0 since the
+	 * size apparently always reports as 0xC0+actual size.
+	 */
+	size = buff[2] - I2C_PRODUCT_INFO_OFFSET;
+	/* Add 1 since address field was 1 byte */
+	buff[1] = addrptr + 1;
+
+	msg.len = I2C_PRODUCT_INFO_ADDR_SIZE + size;
+	ret = i2c_transfer(&adev->pm.smu_i2c, &msg, 1);
+
+	if (ret < 1) {
+		DRM_WARN("FRU: Failed to get data field");
+		return ret;
+	}
+
+	return size;
+}
+
+int amdgpu_fru_get_product_info(struct amdgpu_device *adev)
+{
+	unsigned char buff[34];
+	int addrptr = 0, size = 0;
+
+	if (!is_fru_eeprom_supported(adev))
+		return 0;
+
+	/* If algo exists, it means that the i2c_adapter's initialized */
+	if (!adev->pm.smu_i2c.algo) {
+		DRM_WARN("Cannot access FRU, EEPROM accessor not initialized");
+		return 0;
+	}
+
+	/* There's a lot of repetition here. This is due to the FRU having
+	 * variable-length fields. To get the information, we have to find the
+	 * size of each field, and then keep reading along and reading along
+	 * until we get all of the data that we want. We use addrptr to track
+	 * the address as we go
+	 */
+
+	/* The first fields are all of size 1-byte, from 0-7 are offsets that
+	 * contain information that isn't useful to us.
+	 * Bytes 8-a are all 1-byte and refer to the size of the entire struct,
+	 * and the language field, so just start from 0xb, manufacturer size
+	 */
+	addrptr = 0xb;
+	size = amdgpu_fru_read_eeprom(adev, addrptr, buff);
+	if (size < 1) {
+		DRM_ERROR("Failed to read FRU Manufacturer, ret:%d", size);
+		return size;
+	}
+
+	/* Increment the addrptr by the size of the field, and 1 due to the
+	 * size field being 1 byte. This pattern continues below.
+	 */
+	addrptr += size + 1;
+	size = amdgpu_fru_read_eeprom(adev, addrptr, buff);
+	if (size < 1) {
+		DRM_ERROR("Failed to read FRU product name, ret:%d", size);
+		return size;
+	}
+
+	/* Product name should only be 32 characters. Any more,
+	 * and something could be wrong. Cap it at 32 to be safe
+	 */
+	if (size > 32) {
+		DRM_WARN("FRU Product Number is larger than 32 characters. This is likely a mistake");
+		size = 32;
+	}
+	/* Start at 2 due to buff using fields 0 and 1 for the address */
+	memcpy(adev->product_name, &buff[2], size);
+	adev->product_name[size] = '\0';
+
+	addrptr += size + 1;
+	size = amdgpu_fru_read_eeprom(adev, addrptr, buff);
+	if (size < 1) {
+		DRM_ERROR("Failed to read FRU product number, ret:%d", size);
+		return size;
+	}
+
+	/* Product number should only be 16 characters. Any more,
+	 * and something could be wrong. Cap it at 16 to be safe
+	 */
+	if (size > 16) {
+		DRM_WARN("FRU Product Number is larger than 16 characters. This is likely a mistake");
+		size = 16;
+	}
+	memcpy(adev->product_number, &buff[2], size);
+	adev->product_number[size] = '\0';
+
+	addrptr += size + 1;
+	size = amdgpu_fru_read_eeprom(adev, addrptr, buff);
+
+	if (size < 1) {
+		DRM_ERROR("Failed to read FRU product version, ret:%d", size);
+		return size;
+	}
+
+	addrptr += size + 1;
+	size = amdgpu_fru_read_eeprom(adev, addrptr, buff);
+
+	if (size < 1) {
+		DRM_ERROR("Failed to read FRU serial number, ret:%d", size);
+		return size;
+	}
+
+	/* Serial number should only be 16 characters. Any more,
+	 * and something could be wrong. Cap it at 16 to be safe
+	 */
+	if (size > 16) {
+		DRM_WARN("FRU Serial Number is larger than 16 characters. This is likely a mistake");
+		size = 16;
+	}
+	memcpy(adev->serial, &buff[2], size);
+	adev->serial[size] = '\0';
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.h
new file mode 100644
index 000000000000..968115c97e33
--- /dev/null
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef __AMDGPU_PRODINFO_H__
+#define __AMDGPU_PRODINFO_H__
+
+int amdgpu_fru_get_product_info(struct amdgpu_device *adev);
+
+#endif  // __AMDGPU_PRODINFO_H__
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
index 4277125a79ee..4ed9958af94e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
@@ -29,6 +29,7 @@
 #include <linux/module.h>
 #include <linux/pagemap.h>
 #include <linux/pci.h>
+#include <linux/dma-buf.h>
 
 #include <drm/amdgpu_drm.h>
 #include <drm/drm_debugfs.h>
@@ -161,16 +162,17 @@ void amdgpu_gem_object_close(struct drm_gem_object *obj,
 
 	struct amdgpu_bo_list_entry vm_pd;
 	struct list_head list, duplicates;
+	struct dma_fence *fence = NULL;
 	struct ttm_validate_buffer tv;
 	struct ww_acquire_ctx ticket;
 	struct amdgpu_bo_va *bo_va;
-	int r;
+	long r;
 
 	INIT_LIST_HEAD(&list);
 	INIT_LIST_HEAD(&duplicates);
 
 	tv.bo = &bo->tbo;
-	tv.num_shared = 1;
+	tv.num_shared = 2;
 	list_add(&tv.head, &list);
 
 	amdgpu_vm_get_pd_bo(vm, &list, &vm_pd);
@@ -178,28 +180,34 @@ void amdgpu_gem_object_close(struct drm_gem_object *obj,
 	r = ttm_eu_reserve_buffers(&ticket, &list, false, &duplicates);
 	if (r) {
 		dev_err(adev->dev, "leaking bo va because "
-			"we fail to reserve bo (%d)\n", r);
+			"we fail to reserve bo (%ld)\n", r);
 		return;
 	}
 	bo_va = amdgpu_vm_bo_find(vm, bo);
-	if (bo_va && --bo_va->ref_count == 0) {
-		amdgpu_vm_bo_rmv(adev, bo_va);
-
-		if (amdgpu_vm_ready(vm)) {
-			struct dma_fence *fence = NULL;
+	if (!bo_va || --bo_va->ref_count)
+		goto out_unlock;
 
-			r = amdgpu_vm_clear_freed(adev, vm, &fence);
-			if (unlikely(r)) {
-				dev_err(adev->dev, "failed to clear page "
-					"tables on GEM object close (%d)\n", r);
-			}
+	amdgpu_vm_bo_rmv(adev, bo_va);
+	if (!amdgpu_vm_ready(vm))
+		goto out_unlock;
 
-			if (fence) {
-				amdgpu_bo_fence(bo, fence, true);
-				dma_fence_put(fence);
-			}
-		}
+	fence = dma_resv_get_excl(bo->tbo.base.resv);
+	if (fence) {
+		amdgpu_bo_fence(bo, fence, true);
+		fence = NULL;
 	}
+
+	r = amdgpu_vm_clear_freed(adev, vm, &fence);
+	if (r || !fence)
+		goto out_unlock;
+
+	amdgpu_bo_fence(bo, fence, true);
+	dma_fence_put(fence);
+
+out_unlock:
+	if (unlikely(r < 0))
+		dev_err(adev->dev, "failed to clear page "
+			"tables on GEM object close (%ld)\n", r);
 	ttm_eu_backoff_reservation(&ticket, &list);
 }
 
@@ -226,7 +234,8 @@ int amdgpu_gem_create_ioctl(struct drm_device *dev, void *data,
 		      AMDGPU_GEM_CREATE_CPU_GTT_USWC |
 		      AMDGPU_GEM_CREATE_VRAM_CLEARED |
 		      AMDGPU_GEM_CREATE_VM_ALWAYS_VALID |
-		      AMDGPU_GEM_CREATE_EXPLICIT_SYNC))
+		      AMDGPU_GEM_CREATE_EXPLICIT_SYNC |
+		      AMDGPU_GEM_CREATE_ENCRYPTED))
 
 		return -EINVAL;
 
@@ -234,6 +243,11 @@ int amdgpu_gem_create_ioctl(struct drm_device *dev, void *data,
 	if (args->in.domains & ~AMDGPU_GEM_DOMAIN_MASK)
 		return -EINVAL;
 
+	if (!amdgpu_is_tmz(adev) && (flags & AMDGPU_GEM_CREATE_ENCRYPTED)) {
+		DRM_NOTE_ONCE("Cannot allocate secure buffer since TMZ is disabled\n");
+		return -EINVAL;
+	}
+
 	/* create a gem object to contain this object in */
 	if (args->in.domains & (AMDGPU_GEM_DOMAIN_GDS |
 	    AMDGPU_GEM_DOMAIN_GWS | AMDGPU_GEM_DOMAIN_OA)) {
@@ -854,7 +868,8 @@ static int amdgpu_debugfs_gem_bo_info(int id, void *ptr, void *data)
 	attachment = READ_ONCE(bo->tbo.base.import_attach);
 
 	if (attachment)
-		seq_printf(m, " imported from %p", dma_buf);
+		seq_printf(m, " imported from %p%s", dma_buf,
+			   attachment->peer2peer ? " P2P" : "");
 	else if (dma_buf)
 		seq_printf(m, " exported as %p", dma_buf);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
index 6b9c9193cdfa..0103acc57474 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
@@ -304,10 +304,6 @@ int amdgpu_gfx_kiq_init_ring(struct amdgpu_device *adev,
 
 	spin_lock_init(&kiq->ring_lock);
 
-	r = amdgpu_device_wb_get(adev, &kiq->reg_val_offs);
-	if (r)
-		return r;
-
 	ring->adev = NULL;
 	ring->ring_obj = NULL;
 	ring->use_doorbell = true;
@@ -318,9 +314,11 @@ int amdgpu_gfx_kiq_init_ring(struct amdgpu_device *adev,
 		return r;
 
 	ring->eop_gpu_addr = kiq->eop_gpu_addr;
+	ring->no_scheduler = true;
 	sprintf(ring->name, "kiq_%d.%d.%d", ring->me, ring->pipe, ring->queue);
 	r = amdgpu_ring_init(adev, ring, 1024,
-			     irq, AMDGPU_CP_KIQ_IRQ_DRIVER0);
+			     irq, AMDGPU_CP_KIQ_IRQ_DRIVER0,
+			     AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		dev_warn(adev->dev, "(%d) failed to init kiq ring\n", r);
 
@@ -329,7 +327,6 @@ int amdgpu_gfx_kiq_init_ring(struct amdgpu_device *adev,
 
 void amdgpu_gfx_kiq_free_ring(struct amdgpu_ring *ring)
 {
-	amdgpu_device_wb_free(ring->adev, ring->adev->gfx.kiq.reg_val_offs);
 	amdgpu_ring_fini(ring);
 }
 
@@ -670,16 +667,23 @@ uint32_t amdgpu_kiq_rreg(struct amdgpu_device *adev, uint32_t reg)
 {
 	signed long r, cnt = 0;
 	unsigned long flags;
-	uint32_t seq;
+	uint32_t seq, reg_val_offs = 0, value = 0;
 	struct amdgpu_kiq *kiq = &adev->gfx.kiq;
 	struct amdgpu_ring *ring = &kiq->ring;
 
 	BUG_ON(!ring->funcs->emit_rreg);
 
 	spin_lock_irqsave(&kiq->ring_lock, flags);
+	if (amdgpu_device_wb_get(adev, &reg_val_offs)) {
+		pr_err("critical bug! too many kiq readers\n");
+		goto failed_unlock;
+	}
 	amdgpu_ring_alloc(ring, 32);
-	amdgpu_ring_emit_rreg(ring, reg);
-	amdgpu_fence_emit_polling(ring, &seq);
+	amdgpu_ring_emit_rreg(ring, reg, reg_val_offs);
+	r = amdgpu_fence_emit_polling(ring, &seq, MAX_KIQ_REG_WAIT);
+	if (r)
+		goto failed_undo;
+
 	amdgpu_ring_commit(ring);
 	spin_unlock_irqrestore(&kiq->ring_lock, flags);
 
@@ -705,9 +709,18 @@ uint32_t amdgpu_kiq_rreg(struct amdgpu_device *adev, uint32_t reg)
 	if (cnt > MAX_KIQ_REG_TRY)
 		goto failed_kiq_read;
 
-	return adev->wb.wb[kiq->reg_val_offs];
+	mb();
+	value = adev->wb.wb[reg_val_offs];
+	amdgpu_device_wb_free(adev, reg_val_offs);
+	return value;
 
+failed_undo:
+	amdgpu_ring_undo(ring);
+failed_unlock:
+	spin_unlock_irqrestore(&kiq->ring_lock, flags);
 failed_kiq_read:
+	if (reg_val_offs)
+		amdgpu_device_wb_free(adev, reg_val_offs);
 	pr_err("failed to read reg:%x\n", reg);
 	return ~0;
 }
@@ -725,7 +738,10 @@ void amdgpu_kiq_wreg(struct amdgpu_device *adev, uint32_t reg, uint32_t v)
 	spin_lock_irqsave(&kiq->ring_lock, flags);
 	amdgpu_ring_alloc(ring, 32);
 	amdgpu_ring_emit_wreg(ring, reg, v);
-	amdgpu_fence_emit_polling(ring, &seq);
+	r = amdgpu_fence_emit_polling(ring, &seq, MAX_KIQ_REG_WAIT);
+	if (r)
+		goto failed_undo;
+
 	amdgpu_ring_commit(ring);
 	spin_unlock_irqrestore(&kiq->ring_lock, flags);
 
@@ -754,6 +770,9 @@ void amdgpu_kiq_wreg(struct amdgpu_device *adev, uint32_t reg, uint32_t v)
 
 	return;
 
+failed_undo:
+	amdgpu_ring_undo(ring);
+	spin_unlock_irqrestore(&kiq->ring_lock, flags);
 failed_kiq_write:
 	pr_err("failed to write reg:%x\n", reg);
 }
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
index 5825692d07e4..ee698f0246d8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
@@ -103,7 +103,6 @@ struct amdgpu_kiq {
 	struct amdgpu_ring	ring;
 	struct amdgpu_irq_src	irq;
 	const struct kiq_pm4_funcs *pmf;
-	uint32_t			reg_val_offs;
 };
 
 /*
@@ -286,13 +285,8 @@ struct amdgpu_gfx {
 	bool				me_fw_write_wait;
 	bool				cp_fw_write_wait;
 	struct amdgpu_ring		gfx_ring[AMDGPU_MAX_GFX_RINGS];
-	struct drm_gpu_scheduler	*gfx_sched[AMDGPU_MAX_GFX_RINGS];
-	uint32_t			num_gfx_sched;
 	unsigned			num_gfx_rings;
 	struct amdgpu_ring		compute_ring[AMDGPU_MAX_COMPUTE_RINGS];
-	struct drm_gpu_scheduler        **compute_prio_sched[AMDGPU_GFX_PIPE_PRIO_MAX];
-	struct drm_gpu_scheduler	*compute_sched[AMDGPU_MAX_COMPUTE_RINGS];
-	uint32_t                        num_compute_sched[AMDGPU_GFX_PIPE_PRIO_MAX];
 	unsigned			num_compute_rings;
 	struct amdgpu_irq_src		eop_irq;
 	struct amdgpu_irq_src		priv_reg_irq;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c
index 5884ab590486..acabb57aa8af 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c
@@ -136,8 +136,8 @@ uint64_t amdgpu_gmc_agp_addr(struct ttm_buffer_object *bo)
 /**
  * amdgpu_gmc_vram_location - try to find VRAM location
  *
- * @adev: amdgpu device structure holding all necessary informations
- * @mc: memory controller structure holding memory informations
+ * @adev: amdgpu device structure holding all necessary information
+ * @mc: memory controller structure holding memory information
  * @base: base address at which to put VRAM
  *
  * Function will try to place VRAM at base address provided
@@ -165,8 +165,8 @@ void amdgpu_gmc_vram_location(struct amdgpu_device *adev, struct amdgpu_gmc *mc,
 /**
  * amdgpu_gmc_gart_location - try to find GART location
  *
- * @adev: amdgpu device structure holding all necessary informations
- * @mc: memory controller structure holding memory informations
+ * @adev: amdgpu device structure holding all necessary information
+ * @mc: memory controller structure holding memory information
  *
  * Function will place try to place GART before or after VRAM.
  *
@@ -207,8 +207,8 @@ void amdgpu_gmc_gart_location(struct amdgpu_device *adev, struct amdgpu_gmc *mc)
 
 /**
  * amdgpu_gmc_agp_location - try to find AGP location
- * @adev: amdgpu device structure holding all necessary informations
- * @mc: memory controller structure holding memory informations
+ * @adev: amdgpu device structure holding all necessary information
+ * @mc: memory controller structure holding memory information
  *
  * Function will place try to find a place for the AGP BAR in the MC address
  * space.
@@ -373,3 +373,38 @@ int amdgpu_gmc_allocate_vm_inv_eng(struct amdgpu_device *adev)
 
 	return 0;
 }
+
+/**
+ * amdgpu_tmz_set -- check and set if a device supports TMZ
+ * @adev: amdgpu_device pointer
+ *
+ * Check and set if an the device @adev supports Trusted Memory
+ * Zones (TMZ).
+ */
+void amdgpu_gmc_tmz_set(struct amdgpu_device *adev)
+{
+	switch (adev->asic_type) {
+	case CHIP_RAVEN:
+	case CHIP_RENOIR:
+	case CHIP_NAVI10:
+	case CHIP_NAVI14:
+	case CHIP_NAVI12:
+		/* Don't enable it by default yet.
+		 */
+		if (amdgpu_tmz < 1) {
+			adev->gmc.tmz_enabled = false;
+			dev_info(adev->dev,
+				 "Trusted Memory Zone (TMZ) feature disabled as experimental (default)\n");
+		} else {
+			adev->gmc.tmz_enabled = true;
+			dev_info(adev->dev,
+				 "Trusted Memory Zone (TMZ) feature enabled as experimental (cmd line)\n");
+		}
+		break;
+	default:
+		adev->gmc.tmz_enabled = false;
+		dev_warn(adev->dev,
+			 "Trusted Memory Zone (TMZ) feature not supported\n");
+		break;
+	}
+}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.h
index 7546da0cc70c..2bd9423c1dab 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.h
@@ -213,6 +213,8 @@ struct amdgpu_gmc {
 	} fault_hash[AMDGPU_GMC_FAULT_HASH_SIZE];
 	uint64_t		last_fault:AMDGPU_GMC_FAULT_RING_ORDER;
 
+	bool tmz_enabled;
+
 	const struct amdgpu_gmc_funcs	*gmc_funcs;
 
 	struct amdgpu_xgmi xgmi;
@@ -276,4 +278,6 @@ int amdgpu_gmc_ras_late_init(struct amdgpu_device *adev);
 void amdgpu_gmc_ras_fini(struct amdgpu_device *adev);
 int amdgpu_gmc_allocate_vm_inv_eng(struct amdgpu_device *adev);
 
+extern void amdgpu_gmc_tmz_set(struct amdgpu_device *adev);
+
 #endif
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
index ccbd7acfc4cb..b91853fd66d3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
@@ -61,12 +61,13 @@
  * Returns 0 on success, error on failure.
  */
 int amdgpu_ib_get(struct amdgpu_device *adev, struct amdgpu_vm *vm,
-		  unsigned size, struct amdgpu_ib *ib)
+		  unsigned size, enum amdgpu_ib_pool_type pool_type,
+		  struct amdgpu_ib *ib)
 {
 	int r;
 
 	if (size) {
-		r = amdgpu_sa_bo_new(&adev->ring_tmp_bo,
+		r = amdgpu_sa_bo_new(&adev->ib_pools[pool_type],
 				      &ib->sa_bo, size, 256);
 		if (r) {
 			dev_err(adev->dev, "failed to get a new IB (%d)\n", r);
@@ -131,6 +132,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	uint64_t fence_ctx;
 	uint32_t status = 0, alloc_size;
 	unsigned fence_flags = 0;
+	bool secure;
 
 	unsigned i;
 	int r = 0;
@@ -159,6 +161,12 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 		return -EINVAL;
 	}
 
+	if ((ib->flags & AMDGPU_IB_FLAGS_SECURE) &&
+	    (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE)) {
+		dev_err(adev->dev, "secure submissions not supported on compute rings\n");
+		return -EINVAL;
+	}
+
 	alloc_size = ring->funcs->emit_frame_size + num_ibs *
 		ring->funcs->emit_ib_size;
 
@@ -181,6 +189,9 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 		dma_fence_put(tmp);
 	}
 
+	if ((ib->flags & AMDGPU_IB_FLAG_EMIT_MEM_SYNC) && ring->funcs->emit_mem_sync)
+		ring->funcs->emit_mem_sync(ring);
+
 	if (ring->funcs->insert_start)
 		ring->funcs->insert_start(ring);
 
@@ -215,6 +226,14 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 		amdgpu_ring_emit_cntxcntl(ring, status);
 	}
 
+	/* Setup initial TMZiness and send it off.
+	 */
+	secure = false;
+	if (job && ring->funcs->emit_frame_cntl) {
+		secure = ib->flags & AMDGPU_IB_FLAGS_SECURE;
+		amdgpu_ring_emit_frame_cntl(ring, true, secure);
+	}
+
 	for (i = 0; i < num_ibs; ++i) {
 		ib = &ibs[i];
 
@@ -226,12 +245,20 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 		    !amdgpu_sriov_vf(adev)) /* for SRIOV preemption, Preamble CE ib must be inserted anyway */
 			continue;
 
+		if (job && ring->funcs->emit_frame_cntl) {
+			if (secure != !!(ib->flags & AMDGPU_IB_FLAGS_SECURE)) {
+				amdgpu_ring_emit_frame_cntl(ring, false, secure);
+				secure = !secure;
+				amdgpu_ring_emit_frame_cntl(ring, true, secure);
+			}
+		}
+
 		amdgpu_ring_emit_ib(ring, job, ib, status);
 		status &= ~AMDGPU_HAVE_CTX_SWITCH;
 	}
 
-	if (ring->funcs->emit_tmz)
-		amdgpu_ring_emit_tmz(ring, false);
+	if (job && ring->funcs->emit_frame_cntl)
+		amdgpu_ring_emit_frame_cntl(ring, false, secure);
 
 #ifdef CONFIG_X86_64
 	if (!(adev->flags & AMD_IS_APU))
@@ -280,22 +307,32 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
  */
 int amdgpu_ib_pool_init(struct amdgpu_device *adev)
 {
-	int r;
+	unsigned size;
+	int r, i;
 
-	if (adev->ib_pool_ready) {
+	if (adev->ib_pool_ready)
 		return 0;
-	}
-	r = amdgpu_sa_bo_manager_init(adev, &adev->ring_tmp_bo,
-				      AMDGPU_IB_POOL_SIZE*64*1024,
-				      AMDGPU_GPU_PAGE_SIZE,
-				      AMDGPU_GEM_DOMAIN_GTT);
-	if (r) {
-		return r;
-	}
 
+	for (i = 0; i < AMDGPU_IB_POOL_MAX; i++) {
+		if (i == AMDGPU_IB_POOL_DIRECT)
+			size = PAGE_SIZE * 2;
+		else
+			size = AMDGPU_IB_POOL_SIZE;
+
+		r = amdgpu_sa_bo_manager_init(adev, &adev->ib_pools[i],
+					      size, AMDGPU_GPU_PAGE_SIZE,
+					      AMDGPU_GEM_DOMAIN_GTT);
+		if (r)
+			goto error;
+	}
 	adev->ib_pool_ready = true;
 
 	return 0;
+
+error:
+	while (i--)
+		amdgpu_sa_bo_manager_fini(adev, &adev->ib_pools[i]);
+	return r;
 }
 
 /**
@@ -308,10 +345,14 @@ int amdgpu_ib_pool_init(struct amdgpu_device *adev)
  */
 void amdgpu_ib_pool_fini(struct amdgpu_device *adev)
 {
-	if (adev->ib_pool_ready) {
-		amdgpu_sa_bo_manager_fini(adev, &adev->ring_tmp_bo);
-		adev->ib_pool_ready = false;
-	}
+	int i;
+
+	if (!adev->ib_pool_ready)
+		return;
+
+	for (i = 0; i < AMDGPU_IB_POOL_MAX; i++)
+		amdgpu_sa_bo_manager_fini(adev, &adev->ib_pools[i]);
+	adev->ib_pool_ready = false;
 }
 
 /**
@@ -326,9 +367,9 @@ void amdgpu_ib_pool_fini(struct amdgpu_device *adev)
  */
 int amdgpu_ib_ring_tests(struct amdgpu_device *adev)
 {
-	unsigned i;
-	int r, ret = 0;
 	long tmo_gfx, tmo_mm;
+	int r, ret = 0;
+	unsigned i;
 
 	tmo_mm = tmo_gfx = AMDGPU_IB_TEST_TIMEOUT;
 	if (amdgpu_sriov_vf(adev)) {
@@ -406,10 +447,16 @@ static int amdgpu_debugfs_sa_info(struct seq_file *m, void *data)
 	struct drm_device *dev = node->minor->dev;
 	struct amdgpu_device *adev = dev->dev_private;
 
-	amdgpu_sa_bo_dump_debug_info(&adev->ring_tmp_bo, m);
+	seq_printf(m, "--------------------- DELAYED --------------------- \n");
+	amdgpu_sa_bo_dump_debug_info(&adev->ib_pools[AMDGPU_IB_POOL_DELAYED],
+				     m);
+	seq_printf(m, "-------------------- IMMEDIATE -------------------- \n");
+	amdgpu_sa_bo_dump_debug_info(&adev->ib_pools[AMDGPU_IB_POOL_IMMEDIATE],
+				     m);
+	seq_printf(m, "--------------------- DIRECT ---------------------- \n");
+	amdgpu_sa_bo_dump_debug_info(&adev->ib_pools[AMDGPU_IB_POOL_DIRECT], m);
 
 	return 0;
-
 }
 
 static const struct drm_info_list amdgpu_debugfs_sa_list[] = {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c
index 3a67f6c046d4..fe92dcd94d4a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c
@@ -282,7 +282,7 @@ static int amdgpu_vmid_grab_reserved(struct amdgpu_vm *vm,
 	    !dma_fence_is_later(updates, (*id)->flushed_updates))
 	    updates = NULL;
 
-	if ((*id)->owner != vm->direct.fence_context ||
+	if ((*id)->owner != vm->immediate.fence_context ||
 	    job->vm_pd_addr != (*id)->pd_gpu_addr ||
 	    updates || !(*id)->last_flush ||
 	    ((*id)->last_flush->context != fence_context &&
@@ -349,7 +349,7 @@ static int amdgpu_vmid_grab_used(struct amdgpu_vm *vm,
 		struct dma_fence *flushed;
 
 		/* Check all the prerequisites to using this VMID */
-		if ((*id)->owner != vm->direct.fence_context)
+		if ((*id)->owner != vm->immediate.fence_context)
 			continue;
 
 		if ((*id)->pd_gpu_addr != job->vm_pd_addr)
@@ -448,7 +448,7 @@ int amdgpu_vmid_grab(struct amdgpu_vm *vm, struct amdgpu_ring *ring,
 	}
 
 	id->pd_gpu_addr = job->vm_pd_addr;
-	id->owner = vm->direct.fence_context;
+	id->owner = vm->immediate.fence_context;
 
 	if (job->vm_needs_flush) {
 		dma_fence_put(id->last_flush);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
index 5ed4227f304b..0cc4c67f95f7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
@@ -260,7 +260,7 @@ int amdgpu_irq_init(struct amdgpu_device *adev)
 		nvec = pci_alloc_irq_vectors(adev->pdev, 1, 1, flags);
 		if (nvec > 0) {
 			adev->irq.msi_enabled = true;
-			dev_dbg(adev->dev, "amdgpu: using MSI/MSI-X.\n");
+			dev_dbg(adev->dev, "using MSI/MSI-X.\n");
 		}
 	}
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
index 4981e443a884..47207188c569 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
@@ -33,6 +33,7 @@ static void amdgpu_job_timedout(struct drm_sched_job *s_job)
 	struct amdgpu_ring *ring = to_amdgpu_ring(s_job->sched);
 	struct amdgpu_job *job = to_amdgpu_job(s_job);
 	struct amdgpu_task_info ti;
+	struct amdgpu_device *adev = ring->adev;
 
 	memset(&ti, 0, sizeof(struct amdgpu_task_info));
 
@@ -49,10 +50,13 @@ static void amdgpu_job_timedout(struct drm_sched_job *s_job)
 	DRM_ERROR("Process information: process %s pid %d thread %s pid %d\n",
 		  ti.process_name, ti.tgid, ti.task_name, ti.pid);
 
-	if (amdgpu_device_should_recover_gpu(ring->adev))
+	if (amdgpu_device_should_recover_gpu(ring->adev)) {
 		amdgpu_device_gpu_recover(ring->adev, job);
-	else
+	} else {
 		drm_sched_suspend_timeout(&ring->sched);
+		if (amdgpu_sriov_vf(adev))
+			adev->virt.tdr_debug = true;
+	}
 }
 
 int amdgpu_job_alloc(struct amdgpu_device *adev, unsigned num_ibs,
@@ -87,7 +91,8 @@ int amdgpu_job_alloc(struct amdgpu_device *adev, unsigned num_ibs,
 }
 
 int amdgpu_job_alloc_with_ib(struct amdgpu_device *adev, unsigned size,
-			     struct amdgpu_job **job)
+		enum amdgpu_ib_pool_type pool_type,
+		struct amdgpu_job **job)
 {
 	int r;
 
@@ -95,7 +100,7 @@ int amdgpu_job_alloc_with_ib(struct amdgpu_device *adev, unsigned size,
 	if (r)
 		return r;
 
-	r = amdgpu_ib_get(adev, NULL, size, &(*job)->ibs[0]);
+	r = amdgpu_ib_get(adev, NULL, size, pool_type, &(*job)->ibs[0]);
 	if (r)
 		kfree(*job);
 
@@ -140,7 +145,6 @@ void amdgpu_job_free(struct amdgpu_job *job)
 int amdgpu_job_submit(struct amdgpu_job *job, struct drm_sched_entity *entity,
 		      void *owner, struct dma_fence **f)
 {
-	enum drm_sched_priority priority;
 	int r;
 
 	if (!f)
@@ -152,7 +156,6 @@ int amdgpu_job_submit(struct amdgpu_job *job, struct drm_sched_entity *entity,
 
 	*f = dma_fence_get(&job->base.s_fence->finished);
 	amdgpu_job_free_resources(job);
-	priority = job->base.s_priority;
 	drm_sched_entity_push_job(&job->base, entity);
 
 	return 0;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.h
index 3f7b8433d179..81caac9b958a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.h
@@ -38,6 +38,7 @@
 #define AMDGPU_JOB_GET_VMID(job) ((job) ? (job)->vmid : 0)
 
 struct amdgpu_fence;
+enum amdgpu_ib_pool_type;
 
 struct amdgpu_job {
 	struct drm_sched_job    base;
@@ -61,14 +62,12 @@ struct amdgpu_job {
 	/* user fence handling */
 	uint64_t		uf_addr;
 	uint64_t		uf_sequence;
-
 };
 
 int amdgpu_job_alloc(struct amdgpu_device *adev, unsigned num_ibs,
 		     struct amdgpu_job **job, struct amdgpu_vm *vm);
 int amdgpu_job_alloc_with_ib(struct amdgpu_device *adev, unsigned size,
-			     struct amdgpu_job **job);
-
+		enum amdgpu_ib_pool_type pool, struct amdgpu_job **job);
 void amdgpu_job_free_resources(struct amdgpu_job *job);
 void amdgpu_job_free(struct amdgpu_job *job);
 int amdgpu_job_submit(struct amdgpu_job *job, struct drm_sched_entity *entity,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.c
index 5727f00afc8e..d31d65e6b039 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.c
@@ -144,7 +144,8 @@ static int amdgpu_jpeg_dec_set_reg(struct amdgpu_ring *ring, uint32_t handle,
 	const unsigned ib_size_dw = 16;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4,
+					AMDGPU_IB_POOL_DIRECT, &job);
 	if (r)
 		return r;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.h
index bd9ef9cc86de..5131a0a1bc8a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_jpeg.h
@@ -43,8 +43,6 @@ struct amdgpu_jpeg {
 	uint8_t	num_jpeg_inst;
 	struct amdgpu_jpeg_inst inst[AMDGPU_MAX_JPEG_INSTANCES];
 	struct amdgpu_jpeg_reg internal;
-	struct drm_gpu_scheduler *jpeg_sched[AMDGPU_MAX_JPEG_INSTANCES];
-	uint32_t num_jpeg_sched;
 	unsigned harvest_config;
 	struct delayed_work idle_work;
 	enum amd_powergating_state cur_state;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index fd1dc3236eca..549cf23cbf4f 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -172,7 +172,6 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	else if (amdgpu_device_supports_baco(dev) &&
 		 (amdgpu_runtime_pm != 0) &&
 		 (adev->asic_type >= CHIP_TOPAZ) &&
-		 (adev->asic_type != CHIP_VEGA10) &&
 		 (adev->asic_type != CHIP_VEGA20) &&
 		 (adev->asic_type != CHIP_ARCTURUS)) /* enable runpm on VI+ */
 		adev->runpm = true;
@@ -183,15 +182,13 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	/* Call ACPI methods: require modeset init
 	 * but failure is not fatal
 	 */
-	if (!r) {
-		acpi_status = amdgpu_acpi_init(adev);
-		if (acpi_status)
-			dev_dbg(&dev->pdev->dev,
-				"Error during ACPI methods call\n");
-	}
+
+	acpi_status = amdgpu_acpi_init(adev);
+	if (acpi_status)
+		dev_dbg(&dev->pdev->dev, "Error during ACPI methods call\n");
 
 	if (adev->runpm) {
-		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NEVER_SKIP);
+		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 		pm_runtime_use_autosuspend(dev->dev);
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_nbio.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_nbio.h
index 919bd566ba3c..edaac242ff85 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_nbio.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_nbio.h
@@ -77,7 +77,6 @@ struct amdgpu_nbio_funcs {
 				      u32 *flags);
 	void (*ih_control)(struct amdgpu_device *adev);
 	void (*init_registers)(struct amdgpu_device *adev);
-	void (*detect_hw_virt)(struct amdgpu_device *adev);
 	void (*remap_hdp_registers)(struct amdgpu_device *adev);
 	void (*handle_ras_controller_intr_no_bifring)(struct amdgpu_device *adev);
 	void (*handle_ras_err_event_athub_intr_no_bifring)(struct amdgpu_device *adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
index c687f5415b3f..3d822eba9a5d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
@@ -753,7 +753,7 @@ int amdgpu_bo_restore_shadow(struct amdgpu_bo *shadow, struct dma_fence **fence)
 
 	return amdgpu_copy_buffer(ring, shadow_addr, parent_addr,
 				  amdgpu_bo_size(shadow), NULL, fence,
-				  true, false);
+				  true, false, false);
 }
 
 /**
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
index 5e39ecd8cc28..7d41f7b9a340 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
@@ -229,6 +229,17 @@ static inline bool amdgpu_bo_explicit_sync(struct amdgpu_bo *bo)
 	return bo->flags & AMDGPU_GEM_CREATE_EXPLICIT_SYNC;
 }
 
+/**
+ * amdgpu_bo_encrypted - test if the BO is encrypted
+ * @bo: pointer to a buffer object
+ *
+ * Return true if the buffer object is encrypted, false otherwise.
+ */
+static inline bool amdgpu_bo_encrypted(struct amdgpu_bo *bo)
+{
+	return bo->flags & AMDGPU_GEM_CREATE_ENCRYPTED;
+}
+
 bool amdgpu_bo_is_amdgpu_bo(struct ttm_buffer_object *bo);
 void amdgpu_bo_placement_from_domain(struct amdgpu_bo *abo, u32 domain);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index abe94a55ecad..c762deb5abc7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -444,8 +444,11 @@ static ssize_t amdgpu_get_pp_num_states(struct device *dev,
 		ret = smu_get_power_num_states(&adev->smu, &data);
 		if (ret)
 			return ret;
-	} else if (adev->powerplay.pp_funcs->get_pp_num_states)
+	} else if (adev->powerplay.pp_funcs->get_pp_num_states) {
 		amdgpu_dpm_get_pp_num_states(adev, &data);
+	} else {
+		memset(&data, 0, sizeof(data));
+	}
 
 	pm_runtime_mark_last_busy(ddev->dev);
 	pm_runtime_put_autosuspend(ddev->dev);
@@ -3268,26 +3271,27 @@ int amdgpu_pm_sysfs_init(struct amdgpu_device *adev)
 		return ret;
 	}
 
-
-	ret = device_create_file(adev->dev, &dev_attr_pp_num_states);
-	if (ret) {
-		DRM_ERROR("failed to create device file pp_num_states\n");
-		return ret;
-	}
-	ret = device_create_file(adev->dev, &dev_attr_pp_cur_state);
-	if (ret) {
-		DRM_ERROR("failed to create device file pp_cur_state\n");
-		return ret;
-	}
-	ret = device_create_file(adev->dev, &dev_attr_pp_force_state);
-	if (ret) {
-		DRM_ERROR("failed to create device file pp_force_state\n");
-		return ret;
-	}
-	ret = device_create_file(adev->dev, &dev_attr_pp_table);
-	if (ret) {
-		DRM_ERROR("failed to create device file pp_table\n");
-		return ret;
+	if (!amdgpu_sriov_vf(adev)) {
+		ret = device_create_file(adev->dev, &dev_attr_pp_num_states);
+		if (ret) {
+			DRM_ERROR("failed to create device file pp_num_states\n");
+			return ret;
+		}
+		ret = device_create_file(adev->dev, &dev_attr_pp_cur_state);
+		if (ret) {
+			DRM_ERROR("failed to create device file pp_cur_state\n");
+			return ret;
+		}
+		ret = device_create_file(adev->dev, &dev_attr_pp_force_state);
+		if (ret) {
+			DRM_ERROR("failed to create device file pp_force_state\n");
+			return ret;
+		}
+		ret = device_create_file(adev->dev, &dev_attr_pp_table);
+		if (ret) {
+			DRM_ERROR("failed to create device file pp_table\n");
+			return ret;
+		}
 	}
 
 	ret = device_create_file(adev->dev, &dev_attr_pp_dpm_sclk);
@@ -3334,6 +3338,13 @@ int amdgpu_pm_sysfs_init(struct amdgpu_device *adev)
 			return ret;
 		}
 	}
+
+	/* the reset are not needed for SRIOV one vf mode */
+	if (amdgpu_sriov_vf(adev)) {
+		adev->pm.sysfs_initialized = true;
+		return ret;
+	}
+
 	if (adev->asic_type != CHIP_ARCTURUS) {
 		ret = device_create_file(adev->dev, &dev_attr_pp_dpm_pcie);
 		if (ret) {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index deaa26808841..730f98aab11b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -37,11 +37,11 @@
 
 #include "amdgpu_ras.h"
 
-static void psp_set_funcs(struct amdgpu_device *adev);
-
 static int psp_sysfs_init(struct amdgpu_device *adev);
 static void psp_sysfs_fini(struct amdgpu_device *adev);
 
+static int psp_load_smu_fw(struct psp_context *psp);
+
 /*
  * Due to DF Cstate management centralized to PMFW, the firmware
  * loading sequence will be updated as below:
@@ -80,8 +80,6 @@ static int psp_early_init(void *handle)
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 	struct psp_context *psp = &adev->psp;
 
-	psp_set_funcs(adev);
-
 	switch (adev->asic_type) {
 	case CHIP_VEGA10:
 	case CHIP_VEGA12:
@@ -201,6 +199,7 @@ psp_cmd_submit_buf(struct psp_context *psp,
 	int index;
 	int timeout = 2000;
 	bool ras_intr = false;
+	bool skip_unsupport = false;
 
 	mutex_lock(&psp->mutex);
 
@@ -232,6 +231,9 @@ psp_cmd_submit_buf(struct psp_context *psp,
 		amdgpu_asic_invalidate_hdp(psp->adev, NULL);
 	}
 
+	/* We allow TEE_ERROR_NOT_SUPPORTED for VMR command in SRIOV */
+	skip_unsupport = (psp->cmd_buf_mem->resp.status == 0xffff000a) && amdgpu_sriov_vf(psp->adev);
+
 	/* In some cases, psp response status is not 0 even there is no
 	 * problem while the command is submitted. Some version of PSP FW
 	 * doesn't write 0 to that field.
@@ -239,7 +241,7 @@ psp_cmd_submit_buf(struct psp_context *psp,
 	 * during psp initialization to avoid breaking hw_init and it doesn't
 	 * return -EINVAL.
 	 */
-	if ((psp->cmd_buf_mem->resp.status || !timeout) && !ras_intr) {
+	if (!skip_unsupport && (psp->cmd_buf_mem->resp.status || !timeout) && !ras_intr) {
 		if (ucode)
 			DRM_WARN("failed to load ucode id (%d) ",
 				  ucode->ucode_id);
@@ -268,7 +270,7 @@ static void psp_prep_tmr_cmd_buf(struct psp_context *psp,
 				 struct psp_gfx_cmd_resp *cmd,
 				 uint64_t tmr_mc, uint32_t size)
 {
-	if (psp_support_vmr_ring(psp))
+	if (amdgpu_sriov_vf(psp->adev))
 		cmd->cmd_id = GFX_CMD_ID_SETUP_VMR;
 	else
 		cmd->cmd_id = GFX_CMD_ID_SETUP_TMR;
@@ -884,6 +886,7 @@ static int psp_hdcp_load(struct psp_context *psp)
 	if (!ret) {
 		psp->hdcp_context.hdcp_initialized = true;
 		psp->hdcp_context.session_id = cmd->resp.session_id;
+		mutex_init(&psp->hdcp_context.mutex);
 	}
 
 	kfree(cmd);
@@ -1029,6 +1032,7 @@ static int psp_dtm_load(struct psp_context *psp)
 	if (!ret) {
 		psp->dtm_context.dtm_initialized = true;
 		psp->dtm_context.session_id = cmd->resp.session_id;
+		mutex_init(&psp->dtm_context.mutex);
 	}
 
 	kfree(cmd);
@@ -1169,16 +1173,20 @@ static int psp_hw_start(struct psp_context *psp)
 	}
 
 	/*
-	 * For those ASICs with DF Cstate management centralized
+	 * For ASICs with DF Cstate management centralized
 	 * to PMFW, TMR setup should be performed after PMFW
 	 * loaded and before other non-psp firmware loaded.
 	 */
-	if (!psp->pmfw_centralized_cstate_management) {
-		ret = psp_tmr_load(psp);
-		if (ret) {
-			DRM_ERROR("PSP load tmr failed!\n");
+	if (psp->pmfw_centralized_cstate_management) {
+		ret = psp_load_smu_fw(psp);
+		if (ret)
 			return ret;
-		}
+	}
+
+	ret = psp_tmr_load(psp);
+	if (ret) {
+		DRM_ERROR("PSP load tmr failed!\n");
+		return ret;
 	}
 
 	return 0;
@@ -1355,7 +1363,7 @@ static int psp_prep_load_ip_fw_cmd_buf(struct amdgpu_firmware_info *ucode,
 }
 
 static int psp_execute_np_fw_load(struct psp_context *psp,
-			       struct amdgpu_firmware_info *ucode)
+			          struct amdgpu_firmware_info *ucode)
 {
 	int ret = 0;
 
@@ -1369,64 +1377,95 @@ static int psp_execute_np_fw_load(struct psp_context *psp,
 	return ret;
 }
 
+static int psp_load_smu_fw(struct psp_context *psp)
+{
+	int ret;
+	struct amdgpu_device* adev = psp->adev;
+	struct amdgpu_firmware_info *ucode =
+			&adev->firmware.ucode[AMDGPU_UCODE_ID_SMC];
+
+	if (!ucode->fw || amdgpu_sriov_vf(psp->adev))
+		return 0;
+
+
+	if (adev->in_gpu_reset) {
+		ret = amdgpu_dpm_set_mp1_state(adev, PP_MP1_STATE_UNLOAD);
+		if (ret) {
+			DRM_WARN("Failed to set MP1 state prepare for reload\n");
+		}
+	}
+
+	ret = psp_execute_np_fw_load(psp, ucode);
+
+	if (ret)
+		DRM_ERROR("PSP load smu failed!\n");
+
+	return ret;
+}
+
+static bool fw_load_skip_check(struct psp_context *psp,
+			       struct amdgpu_firmware_info *ucode)
+{
+	if (!ucode->fw)
+		return true;
+
+	if (ucode->ucode_id == AMDGPU_UCODE_ID_SMC &&
+	    (psp_smu_reload_quirk(psp) ||
+	     psp->autoload_supported ||
+	     psp->pmfw_centralized_cstate_management))
+		return true;
+
+	if (amdgpu_sriov_vf(psp->adev) &&
+	   (ucode->ucode_id == AMDGPU_UCODE_ID_SDMA0
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA1
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA2
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA3
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA4
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA5
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA6
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA7
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_G
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_CNTL
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_GPM_MEM
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_SRM_MEM
+	    || ucode->ucode_id == AMDGPU_UCODE_ID_SMC))
+		/*skip ucode loading in SRIOV VF */
+		return true;
+
+	if (psp->autoload_supported &&
+	    (ucode->ucode_id == AMDGPU_UCODE_ID_CP_MEC1_JT ||
+	     ucode->ucode_id == AMDGPU_UCODE_ID_CP_MEC2_JT))
+		/* skip mec JT when autoload is enabled */
+		return true;
+
+	return false;
+}
+
 static int psp_np_fw_load(struct psp_context *psp)
 {
 	int i, ret;
 	struct amdgpu_firmware_info *ucode;
 	struct amdgpu_device* adev = psp->adev;
 
-	if (psp->autoload_supported ||
-	    psp->pmfw_centralized_cstate_management) {
-		ucode = &adev->firmware.ucode[AMDGPU_UCODE_ID_SMC];
-		if (!ucode->fw || amdgpu_sriov_vf(adev))
-			goto out;
-
-		ret = psp_execute_np_fw_load(psp, ucode);
+	if (psp->autoload_supported &&
+	    !psp->pmfw_centralized_cstate_management) {
+		ret = psp_load_smu_fw(psp);
 		if (ret)
 			return ret;
 	}
 
-	if (psp->pmfw_centralized_cstate_management) {
-		ret = psp_tmr_load(psp);
-		if (ret) {
-			DRM_ERROR("PSP load tmr failed!\n");
-			return ret;
-		}
-	}
-
-out:
 	for (i = 0; i < adev->firmware.max_ucodes; i++) {
 		ucode = &adev->firmware.ucode[i];
-		if (!ucode->fw)
-			continue;
 
 		if (ucode->ucode_id == AMDGPU_UCODE_ID_SMC &&
-		    (psp_smu_reload_quirk(psp) ||
-		     psp->autoload_supported ||
-		     psp->pmfw_centralized_cstate_management))
-			continue;
-
-		if (amdgpu_sriov_vf(adev) &&
-		   (ucode->ucode_id == AMDGPU_UCODE_ID_SDMA0
-		    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA1
-		    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA2
-		    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA3
-		    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA4
-		    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA5
-		    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA6
-		    || ucode->ucode_id == AMDGPU_UCODE_ID_SDMA7
-                    || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_G
-	            || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_CNTL
-	            || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_GPM_MEM
-	            || ucode->ucode_id == AMDGPU_UCODE_ID_RLC_RESTORE_LIST_SRM_MEM
-	            || ucode->ucode_id == AMDGPU_UCODE_ID_SMC))
-			/*skip ucode loading in SRIOV VF */
+		    !fw_load_skip_check(psp, ucode)) {
+			ret = psp_load_smu_fw(psp);
+			if (ret)
+				return ret;
 			continue;
+		}
 
-		if (psp->autoload_supported &&
-		    (ucode->ucode_id == AMDGPU_UCODE_ID_CP_MEC1_JT ||
-		     ucode->ucode_id == AMDGPU_UCODE_ID_CP_MEC2_JT))
-			/* skip mec JT when autoload is enabled */
+		if (fw_load_skip_check(psp, ucode))
 			continue;
 
 		psp_print_fw_hdr(psp, ucode);
@@ -1444,11 +1483,6 @@ static int psp_np_fw_load(struct psp_context *psp)
 				return ret;
 			}
 		}
-#if 0
-		/* check if firmware loaded sucessfully */
-		if (!amdgpu_psp_check_fw_loading_status(adev, i))
-			return -EINVAL;
-#endif
 	}
 
 	return 0;
@@ -1806,19 +1840,110 @@ int psp_ring_cmd_submit(struct psp_context *psp,
 	return 0;
 }
 
-static bool psp_check_fw_loading_status(struct amdgpu_device *adev,
-					enum AMDGPU_UCODE_ID ucode_type)
+int psp_init_asd_microcode(struct psp_context *psp,
+			   const char *chip_name)
+{
+	struct amdgpu_device *adev = psp->adev;
+	char fw_name[30];
+	const struct psp_firmware_header_v1_0 *asd_hdr;
+	int err = 0;
+
+	if (!chip_name) {
+		dev_err(adev->dev, "invalid chip name for asd microcode\n");
+		return -EINVAL;
+	}
+
+	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_asd.bin", chip_name);
+	err = request_firmware(&adev->psp.asd_fw, fw_name, adev->dev);
+	if (err)
+		goto out;
+
+	err = amdgpu_ucode_validate(adev->psp.asd_fw);
+	if (err)
+		goto out;
+
+	asd_hdr = (const struct psp_firmware_header_v1_0 *)adev->psp.asd_fw->data;
+	adev->psp.asd_fw_version = le32_to_cpu(asd_hdr->header.ucode_version);
+	adev->psp.asd_feature_version = le32_to_cpu(asd_hdr->ucode_feature_version);
+	adev->psp.asd_ucode_size = le32_to_cpu(asd_hdr->header.ucode_size_bytes);
+	adev->psp.asd_start_addr = (uint8_t *)asd_hdr +
+				le32_to_cpu(asd_hdr->header.ucode_array_offset_bytes);
+	return 0;
+out:
+	dev_err(adev->dev, "fail to initialize asd microcode\n");
+	release_firmware(adev->psp.asd_fw);
+	adev->psp.asd_fw = NULL;
+	return err;
+}
+
+int psp_init_sos_microcode(struct psp_context *psp,
+			   const char *chip_name)
 {
-	struct amdgpu_firmware_info *ucode = NULL;
+	struct amdgpu_device *adev = psp->adev;
+	char fw_name[30];
+	const struct psp_firmware_header_v1_0 *sos_hdr;
+	const struct psp_firmware_header_v1_1 *sos_hdr_v1_1;
+	const struct psp_firmware_header_v1_2 *sos_hdr_v1_2;
+	int err = 0;
+
+	if (!chip_name) {
+		dev_err(adev->dev, "invalid chip name for sos microcode\n");
+		return -EINVAL;
+	}
 
-	if (!adev->firmware.fw_size)
-		return false;
+	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sos.bin", chip_name);
+	err = request_firmware(&adev->psp.sos_fw, fw_name, adev->dev);
+	if (err)
+		goto out;
+
+	err = amdgpu_ucode_validate(adev->psp.sos_fw);
+	if (err)
+		goto out;
+
+	sos_hdr = (const struct psp_firmware_header_v1_0 *)adev->psp.sos_fw->data;
+	amdgpu_ucode_print_psp_hdr(&sos_hdr->header);
+
+	switch (sos_hdr->header.header_version_major) {
+	case 1:
+		adev->psp.sos_fw_version = le32_to_cpu(sos_hdr->header.ucode_version);
+		adev->psp.sos_feature_version = le32_to_cpu(sos_hdr->ucode_feature_version);
+		adev->psp.sos_bin_size = le32_to_cpu(sos_hdr->sos_size_bytes);
+		adev->psp.sys_bin_size = le32_to_cpu(sos_hdr->sos_offset_bytes);
+		adev->psp.sys_start_addr = (uint8_t *)sos_hdr +
+				le32_to_cpu(sos_hdr->header.ucode_array_offset_bytes);
+		adev->psp.sos_start_addr = (uint8_t *)adev->psp.sys_start_addr +
+				le32_to_cpu(sos_hdr->sos_offset_bytes);
+		if (sos_hdr->header.header_version_minor == 1) {
+			sos_hdr_v1_1 = (const struct psp_firmware_header_v1_1 *)adev->psp.sos_fw->data;
+			adev->psp.toc_bin_size = le32_to_cpu(sos_hdr_v1_1->toc_size_bytes);
+			adev->psp.toc_start_addr = (uint8_t *)adev->psp.sys_start_addr +
+					le32_to_cpu(sos_hdr_v1_1->toc_offset_bytes);
+			adev->psp.kdb_bin_size = le32_to_cpu(sos_hdr_v1_1->kdb_size_bytes);
+			adev->psp.kdb_start_addr = (uint8_t *)adev->psp.sys_start_addr +
+					le32_to_cpu(sos_hdr_v1_1->kdb_offset_bytes);
+		}
+		if (sos_hdr->header.header_version_minor == 2) {
+			sos_hdr_v1_2 = (const struct psp_firmware_header_v1_2 *)adev->psp.sos_fw->data;
+			adev->psp.kdb_bin_size = le32_to_cpu(sos_hdr_v1_2->kdb_size_bytes);
+			adev->psp.kdb_start_addr = (uint8_t *)adev->psp.sys_start_addr +
+						    le32_to_cpu(sos_hdr_v1_2->kdb_offset_bytes);
+		}
+		break;
+	default:
+		dev_err(adev->dev,
+			"unsupported psp sos firmware\n");
+		err = -EINVAL;
+		goto out;
+	}
 
-	ucode = &adev->firmware.ucode[ucode_type];
-	if (!ucode->fw || !ucode->ucode_size)
-		return false;
+	return 0;
+out:
+	dev_err(adev->dev,
+		"failed to init sos firmware\n");
+	release_firmware(adev->psp.sos_fw);
+	adev->psp.sos_fw = NULL;
 
-	return psp_compare_sram_data(&adev->psp, ucode, ucode_type);
+	return err;
 }
 
 static int psp_set_clockgating_state(void *handle,
@@ -1957,16 +2082,6 @@ static void psp_sysfs_fini(struct amdgpu_device *adev)
 	device_remove_file(adev->dev, &dev_attr_usbc_pd_fw);
 }
 
-static const struct amdgpu_psp_funcs psp_funcs = {
-	.check_fw_loading_status = psp_check_fw_loading_status,
-};
-
-static void psp_set_funcs(struct amdgpu_device *adev)
-{
-	if (NULL == adev->firmware.funcs)
-		adev->firmware.funcs = &psp_funcs;
-}
-
 const struct amdgpu_ip_block_version psp_v3_1_ip_block =
 {
 	.type = AMD_IP_BLOCK_TYPE_PSP,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h
index 297435c0c7c1..7fcd63d5432c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h
@@ -93,9 +93,6 @@ struct psp_funcs
 			    enum psp_ring_type ring_type);
 	int (*ring_destroy)(struct psp_context *psp,
 			    enum psp_ring_type ring_type);
-	bool (*compare_sram_data)(struct psp_context *psp,
-				  struct amdgpu_firmware_info *ucode,
-				  enum AMDGPU_UCODE_ID ucode_type);
 	bool (*smu_reload_quirk)(struct psp_context *psp);
 	int (*mode1_reset)(struct psp_context *psp);
 	int (*xgmi_get_node_id)(struct psp_context *psp, uint64_t *node_id);
@@ -104,7 +101,6 @@ struct psp_funcs
 				      struct psp_xgmi_topology_info *topology);
 	int (*xgmi_set_topology_info)(struct psp_context *psp, int number_devices,
 				      struct psp_xgmi_topology_info *topology);
-	bool (*support_vmr_ring)(struct psp_context *psp);
 	int (*ras_trigger_error)(struct psp_context *psp,
 			struct ta_ras_trigger_error_input *info);
 	int (*ras_cure_posion)(struct psp_context *psp, uint64_t *mode_ptr);
@@ -161,6 +157,7 @@ struct psp_hdcp_context {
 	struct amdgpu_bo	*hdcp_shared_bo;
 	uint64_t		hdcp_shared_mc_addr;
 	void			*hdcp_shared_buf;
+	struct mutex		mutex;
 };
 
 struct psp_dtm_context {
@@ -169,6 +166,7 @@ struct psp_dtm_context {
 	struct amdgpu_bo	*dtm_shared_bo;
 	uint64_t		dtm_shared_mc_addr;
 	void			*dtm_shared_buf;
+	struct mutex		mutex;
 };
 
 #define MEM_TRAIN_SYSTEM_SIGNATURE		0x54534942
@@ -306,8 +304,6 @@ struct amdgpu_psp_funcs {
 #define psp_ring_create(psp, type) (psp)->funcs->ring_create((psp), (type))
 #define psp_ring_stop(psp, type) (psp)->funcs->ring_stop((psp), (type))
 #define psp_ring_destroy(psp, type) ((psp)->funcs->ring_destroy((psp), (type)))
-#define psp_compare_sram_data(psp, ucode, type) \
-		(psp)->funcs->compare_sram_data((psp), (ucode), (type))
 #define psp_init_microcode(psp) \
 		((psp)->funcs->init_microcode ? (psp)->funcs->init_microcode((psp)) : 0)
 #define psp_bootloader_load_kdb(psp) \
@@ -318,8 +314,6 @@ struct amdgpu_psp_funcs {
 		((psp)->funcs->bootloader_load_sos ? (psp)->funcs->bootloader_load_sos((psp)) : 0)
 #define psp_smu_reload_quirk(psp) \
 		((psp)->funcs->smu_reload_quirk ? (psp)->funcs->smu_reload_quirk((psp)) : false)
-#define psp_support_vmr_ring(psp) \
-		((psp)->funcs->support_vmr_ring ? (psp)->funcs->support_vmr_ring((psp)) : false)
 #define psp_mode1_reset(psp) \
 		((psp)->funcs->mode1_reset ? (psp)->funcs->mode1_reset((psp)) : false)
 #define psp_xgmi_get_node_id(psp, node_id) \
@@ -341,8 +335,6 @@ struct amdgpu_psp_funcs {
 #define psp_mem_training(psp, ops) \
 	((psp)->funcs->mem_training ? (psp)->funcs->mem_training((psp), (ops)) : 0)
 
-#define amdgpu_psp_check_fw_loading_status(adev, i) (adev)->firmware.funcs->check_fw_loading_status((adev), (i))
-
 #define psp_ras_trigger_error(psp, info) \
 	((psp)->funcs->ras_trigger_error ? \
 	(psp)->funcs->ras_trigger_error((psp), (info)) : -EINVAL)
@@ -393,4 +385,8 @@ int psp_ring_cmd_submit(struct psp_context *psp,
 			uint64_t cmd_buf_mc_addr,
 			uint64_t fence_mc_addr,
 			int index);
+int psp_init_asd_microcode(struct psp_context *psp,
+			   const char *chip_name);
+int psp_init_sos_microcode(struct psp_context *psp,
+			   const char *chip_name);
 #endif
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
index ab379b44679c..8b14aee370c8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -80,6 +80,20 @@ atomic_t amdgpu_ras_in_intr = ATOMIC_INIT(0);
 static bool amdgpu_ras_check_bad_page(struct amdgpu_device *adev,
 				uint64_t addr);
 
+void amdgpu_ras_set_error_query_ready(struct amdgpu_device *adev, bool ready)
+{
+	if (adev && amdgpu_ras_get_context(adev))
+		amdgpu_ras_get_context(adev)->error_query_ready = ready;
+}
+
+bool amdgpu_ras_get_error_query_ready(struct amdgpu_device *adev)
+{
+	if (adev && amdgpu_ras_get_context(adev))
+		return amdgpu_ras_get_context(adev)->error_query_ready;
+
+	return false;
+}
+
 static ssize_t amdgpu_ras_debugfs_read(struct file *f, char __user *buf,
 					size_t size, loff_t *pos)
 {
@@ -281,8 +295,9 @@ static ssize_t amdgpu_ras_debugfs_ctrl_write(struct file *f, const char __user *
 	struct ras_debug_if data;
 	int ret = 0;
 
-	if (amdgpu_ras_intr_triggered()) {
-		DRM_WARN("RAS WARN: error injection currently inaccessible\n");
+	if (!amdgpu_ras_get_error_query_ready(adev)) {
+		dev_warn(adev->dev, "RAS WARN: error injection "
+				"currently inaccessible\n");
 		return size;
 	}
 
@@ -310,7 +325,8 @@ static ssize_t amdgpu_ras_debugfs_ctrl_write(struct file *f, const char __user *
 		/* umc ce/ue error injection for a bad page is not allowed */
 		if ((data.head.block == AMDGPU_RAS_BLOCK__UMC) &&
 		    amdgpu_ras_check_bad_page(adev, data.inject.address)) {
-			DRM_WARN("RAS WARN: 0x%llx has been marked as bad before error injection!\n",
+			dev_warn(adev->dev, "RAS WARN: 0x%llx has been marked "
+					"as bad before error injection!\n",
 					data.inject.address);
 			break;
 		}
@@ -399,7 +415,7 @@ static ssize_t amdgpu_ras_sysfs_read(struct device *dev,
 		.head = obj->head,
 	};
 
-	if (amdgpu_ras_intr_triggered())
+	if (!amdgpu_ras_get_error_query_ready(obj->adev))
 		return snprintf(buf, PAGE_SIZE,
 				"Query currently inaccessible\n");
 
@@ -576,7 +592,8 @@ int amdgpu_ras_feature_enable(struct amdgpu_device *adev,
 	if (!amdgpu_ras_intr_triggered()) {
 		ret = psp_ras_enable_features(&adev->psp, &info, enable);
 		if (ret) {
-			DRM_ERROR("RAS ERROR: %s %s feature failed ret %d\n",
+			dev_err(adev->dev, "RAS ERROR: %s %s feature "
+					"failed ret %d\n",
 					enable ? "enable":"disable",
 					ras_block_str(head->block),
 					ret);
@@ -618,7 +635,8 @@ int amdgpu_ras_feature_enable_on_boot(struct amdgpu_device *adev,
 			if (ret == -EINVAL) {
 				ret = __amdgpu_ras_feature_enable(adev, head, 1);
 				if (!ret)
-					DRM_INFO("RAS INFO: %s setup object\n",
+					dev_info(adev->dev,
+						"RAS INFO: %s setup object\n",
 						ras_block_str(head->block));
 			}
 		} else {
@@ -744,12 +762,17 @@ int amdgpu_ras_error_query(struct amdgpu_device *adev,
 	info->ce_count = obj->err_data.ce_count;
 
 	if (err_data.ce_count) {
-		dev_info(adev->dev, "%ld correctable errors detected in %s block\n",
-			 obj->err_data.ce_count, ras_block_str(info->head.block));
+		dev_info(adev->dev, "%ld correctable hardware errors "
+					"detected in %s block, no user "
+					"action is needed.\n",
+					obj->err_data.ce_count,
+					ras_block_str(info->head.block));
 	}
 	if (err_data.ue_count) {
-		dev_info(adev->dev, "%ld uncorrectable errors detected in %s block\n",
-			 obj->err_data.ue_count, ras_block_str(info->head.block));
+		dev_info(adev->dev, "%ld uncorrectable hardware errors "
+					"detected in %s block\n",
+					obj->err_data.ue_count,
+					ras_block_str(info->head.block));
 	}
 
 	return 0;
@@ -793,13 +816,13 @@ int amdgpu_ras_error_inject(struct amdgpu_device *adev,
 		ret = psp_ras_trigger_error(&adev->psp, &block_info);
 		break;
 	default:
-		DRM_INFO("%s error injection is not supported yet\n",
+		dev_info(adev->dev, "%s error injection is not supported yet\n",
 			 ras_block_str(info->head.block));
 		ret = -EINVAL;
 	}
 
 	if (ret)
-		DRM_ERROR("RAS ERROR: inject %s error failed ret %d\n",
+		dev_err(adev->dev, "RAS ERROR: inject %s error failed ret %d\n",
 				ras_block_str(info->head.block),
 				ret);
 
@@ -1430,9 +1453,10 @@ static void amdgpu_ras_do_recovery(struct work_struct *work)
 	struct amdgpu_hive_info *hive = amdgpu_get_xgmi_hive(adev, false);
 
 	/* Build list of devices to query RAS related errors */
-	if  (hive && adev->gmc.xgmi.num_physical_nodes > 1) {
+	if  (hive && adev->gmc.xgmi.num_physical_nodes > 1)
 		device_list_handle = &hive->device_list;
-	} else {
+	else {
+		INIT_LIST_HEAD(&device_list);
 		list_add_tail(&adev->gmc.xgmi.head, &device_list);
 		device_list_handle = &device_list;
 	}
@@ -1535,7 +1559,7 @@ static int amdgpu_ras_save_bad_pages(struct amdgpu_device *adev)
 							&data->bps[control->num_recs],
 							true,
 							save_count)) {
-			DRM_ERROR("Failed to save EEPROM table data!");
+			dev_err(adev->dev, "Failed to save EEPROM table data!");
 			return -EIO;
 		}
 
@@ -1563,7 +1587,7 @@ static int amdgpu_ras_load_bad_pages(struct amdgpu_device *adev)
 
 	if (amdgpu_ras_eeprom_process_recods(control, bps, false,
 		control->num_recs)) {
-		DRM_ERROR("Failed to load EEPROM table records!");
+		dev_err(adev->dev, "Failed to load EEPROM table records!");
 		ret = -EIO;
 		goto out;
 	}
@@ -1637,7 +1661,8 @@ int amdgpu_ras_reserve_bad_pages(struct amdgpu_device *adev)
 					       AMDGPU_GPU_PAGE_SIZE,
 					       AMDGPU_GEM_DOMAIN_VRAM,
 					       &bo, NULL))
-			DRM_WARN("RAS WARN: reserve vram for retired page %llx fail\n", bp);
+			dev_warn(adev->dev, "RAS WARN: reserve vram for "
+					"retired page %llx fail\n", bp);
 
 		data->bps_bo[i] = bo;
 		data->last_reserved = i + 1;
@@ -1725,7 +1750,7 @@ int amdgpu_ras_recovery_init(struct amdgpu_device *adev)
 	kfree(*data);
 	con->eh_data = NULL;
 out:
-	DRM_WARN("Failed to initialize ras recovery!\n");
+	dev_warn(adev->dev, "Failed to initialize ras recovery!\n");
 
 	return ret;
 }
@@ -1787,18 +1812,18 @@ static void amdgpu_ras_check_supported(struct amdgpu_device *adev,
 		return;
 
 	if (amdgpu_atomfirmware_mem_ecc_supported(adev)) {
-		DRM_INFO("HBM ECC is active.\n");
+		dev_info(adev->dev, "HBM ECC is active.\n");
 		*hw_supported |= (1 << AMDGPU_RAS_BLOCK__UMC |
 				1 << AMDGPU_RAS_BLOCK__DF);
 	} else
-		DRM_INFO("HBM ECC is not presented.\n");
+		dev_info(adev->dev, "HBM ECC is not presented.\n");
 
 	if (amdgpu_atomfirmware_sram_ecc_supported(adev)) {
-		DRM_INFO("SRAM ECC is active.\n");
+		dev_info(adev->dev, "SRAM ECC is active.\n");
 		*hw_supported |= ~(1 << AMDGPU_RAS_BLOCK__UMC |
 				1 << AMDGPU_RAS_BLOCK__DF);
 	} else
-		DRM_INFO("SRAM ECC is not presented.\n");
+		dev_info(adev->dev, "SRAM ECC is not presented.\n");
 
 	/* hw_supported needs to be aligned with RAS block mask. */
 	*hw_supported &= AMDGPU_RAS_BLOCK_MASK;
@@ -1855,7 +1880,7 @@ int amdgpu_ras_init(struct amdgpu_device *adev)
 	if (amdgpu_ras_fs_init(adev))
 		goto fs_out;
 
-	DRM_INFO("RAS INFO: ras initialized successfully, "
+	dev_info(adev->dev, "RAS INFO: ras initialized successfully, "
 			"hardware ability[%x] ras_mask[%x]\n",
 			con->hw_supported, con->supported);
 	return 0;
@@ -2037,7 +2062,8 @@ void amdgpu_ras_global_ras_isr(struct amdgpu_device *adev)
 		return;
 
 	if (atomic_cmpxchg(&amdgpu_ras_in_intr, 0, 1) == 0) {
-		DRM_WARN("RAS event of type ERREVENT_ATHUB_INTERRUPT detected!\n");
+		dev_info(adev->dev, "uncorrectable hardware error"
+			"(ERREVENT_ATHUB_INTERRUPT) detected!\n");
 
 		amdgpu_ras_reset_gpu(adev);
 	}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h
index 55c3eceb390d..e7df5d8429f8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h
@@ -334,6 +334,8 @@ struct amdgpu_ras {
 	uint32_t flags;
 	bool reboot;
 	struct amdgpu_ras_eeprom_control eeprom_control;
+
+	bool error_query_ready;
 };
 
 struct ras_fs_data {
@@ -629,4 +631,6 @@ static inline void amdgpu_ras_intr_cleared(void)
 
 void amdgpu_ras_global_ras_isr(struct amdgpu_device *adev);
 
+void amdgpu_ras_set_error_query_ready(struct amdgpu_device *adev, bool ready);
+
 #endif
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c
index a7e1d0425ed0..13ea8ebc421c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c
@@ -162,11 +162,13 @@ void amdgpu_ring_undo(struct amdgpu_ring *ring)
  * Returns 0 on success, error on failure.
  */
 int amdgpu_ring_init(struct amdgpu_device *adev, struct amdgpu_ring *ring,
-		     unsigned max_dw, struct amdgpu_irq_src *irq_src,
-		     unsigned irq_type)
+		     unsigned int max_dw, struct amdgpu_irq_src *irq_src,
+		     unsigned int irq_type, unsigned int hw_prio)
 {
 	int r, i;
 	int sched_hw_submission = amdgpu_sched_hw_submission;
+	u32 *num_sched;
+	u32 hw_ip;
 
 	/* Set the hw submission limit higher for KIQ because
 	 * it's used for a number of gfx/compute tasks by both
@@ -258,6 +260,13 @@ int amdgpu_ring_init(struct amdgpu_device *adev, struct amdgpu_ring *ring,
 	ring->priority = DRM_SCHED_PRIORITY_NORMAL;
 	mutex_init(&ring->priority_mutex);
 
+	if (!ring->no_scheduler) {
+		hw_ip = ring->funcs->type;
+		num_sched = &adev->gpu_sched[hw_ip][hw_prio].num_scheds;
+		adev->gpu_sched[hw_ip][hw_prio].sched[(*num_sched)++] =
+			&ring->sched;
+	}
+
 	for (i = 0; i < DRM_SCHED_PRIORITY_MAX; ++i)
 		atomic_set(&ring->num_jobs[i], 0);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
index 9a443013d70d..be218754629a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
@@ -30,11 +30,15 @@
 
 /* max number of rings */
 #define AMDGPU_MAX_RINGS		28
+#define AMDGPU_MAX_HWIP_RINGS		8
 #define AMDGPU_MAX_GFX_RINGS		2
 #define AMDGPU_MAX_COMPUTE_RINGS	8
 #define AMDGPU_MAX_VCE_RINGS		3
 #define AMDGPU_MAX_UVD_ENC_RINGS	2
 
+#define AMDGPU_RING_PRIO_DEFAULT	1
+#define AMDGPU_RING_PRIO_MAX		AMDGPU_GFX_PIPE_PRIO_MAX
+
 /* some special values for the owner field */
 #define AMDGPU_FENCE_OWNER_UNDEFINED	((void *)0ul)
 #define AMDGPU_FENCE_OWNER_VM		((void *)1ul)
@@ -46,17 +50,30 @@
 
 #define to_amdgpu_ring(s) container_of((s), struct amdgpu_ring, sched)
 
+#define AMDGPU_IB_POOL_SIZE	(1024 * 1024)
+
 enum amdgpu_ring_type {
-	AMDGPU_RING_TYPE_GFX,
-	AMDGPU_RING_TYPE_COMPUTE,
-	AMDGPU_RING_TYPE_SDMA,
-	AMDGPU_RING_TYPE_UVD,
-	AMDGPU_RING_TYPE_VCE,
-	AMDGPU_RING_TYPE_KIQ,
-	AMDGPU_RING_TYPE_UVD_ENC,
-	AMDGPU_RING_TYPE_VCN_DEC,
-	AMDGPU_RING_TYPE_VCN_ENC,
-	AMDGPU_RING_TYPE_VCN_JPEG
+	AMDGPU_RING_TYPE_GFX		= AMDGPU_HW_IP_GFX,
+	AMDGPU_RING_TYPE_COMPUTE	= AMDGPU_HW_IP_COMPUTE,
+	AMDGPU_RING_TYPE_SDMA		= AMDGPU_HW_IP_DMA,
+	AMDGPU_RING_TYPE_UVD		= AMDGPU_HW_IP_UVD,
+	AMDGPU_RING_TYPE_VCE		= AMDGPU_HW_IP_VCE,
+	AMDGPU_RING_TYPE_UVD_ENC	= AMDGPU_HW_IP_UVD_ENC,
+	AMDGPU_RING_TYPE_VCN_DEC	= AMDGPU_HW_IP_VCN_DEC,
+	AMDGPU_RING_TYPE_VCN_ENC	= AMDGPU_HW_IP_VCN_ENC,
+	AMDGPU_RING_TYPE_VCN_JPEG	= AMDGPU_HW_IP_VCN_JPEG,
+	AMDGPU_RING_TYPE_KIQ
+};
+
+enum amdgpu_ib_pool_type {
+	/* Normal submissions to the top of the pipeline. */
+	AMDGPU_IB_POOL_DELAYED,
+	/* Immediate submissions to the bottom of the pipeline. */
+	AMDGPU_IB_POOL_IMMEDIATE,
+	/* Direct submission to the ring buffer during init and reset. */
+	AMDGPU_IB_POOL_DIRECT,
+
+	AMDGPU_IB_POOL_MAX
 };
 
 struct amdgpu_device;
@@ -65,6 +82,11 @@ struct amdgpu_ib;
 struct amdgpu_cs_parser;
 struct amdgpu_job;
 
+struct amdgpu_sched {
+	u32				num_scheds;
+	struct drm_gpu_scheduler	*sched[AMDGPU_MAX_HWIP_RINGS];
+};
+
 /*
  * Fences.
  */
@@ -96,7 +118,8 @@ void amdgpu_fence_driver_suspend(struct amdgpu_device *adev);
 void amdgpu_fence_driver_resume(struct amdgpu_device *adev);
 int amdgpu_fence_emit(struct amdgpu_ring *ring, struct dma_fence **fence,
 		      unsigned flags);
-int amdgpu_fence_emit_polling(struct amdgpu_ring *ring, uint32_t *s);
+int amdgpu_fence_emit_polling(struct amdgpu_ring *ring, uint32_t *s,
+			      uint32_t timeout);
 bool amdgpu_fence_process(struct amdgpu_ring *ring);
 int amdgpu_fence_wait_empty(struct amdgpu_ring *ring);
 signed long amdgpu_fence_wait_polling(struct amdgpu_ring *ring,
@@ -159,17 +182,20 @@ struct amdgpu_ring_funcs {
 	void (*end_use)(struct amdgpu_ring *ring);
 	void (*emit_switch_buffer) (struct amdgpu_ring *ring);
 	void (*emit_cntxcntl) (struct amdgpu_ring *ring, uint32_t flags);
-	void (*emit_rreg)(struct amdgpu_ring *ring, uint32_t reg);
+	void (*emit_rreg)(struct amdgpu_ring *ring, uint32_t reg,
+			  uint32_t reg_val_offs);
 	void (*emit_wreg)(struct amdgpu_ring *ring, uint32_t reg, uint32_t val);
 	void (*emit_reg_wait)(struct amdgpu_ring *ring, uint32_t reg,
 			      uint32_t val, uint32_t mask);
 	void (*emit_reg_write_reg_wait)(struct amdgpu_ring *ring,
 					uint32_t reg0, uint32_t reg1,
 					uint32_t ref, uint32_t mask);
-	void (*emit_tmz)(struct amdgpu_ring *ring, bool start);
+	void (*emit_frame_cntl)(struct amdgpu_ring *ring, bool start,
+				bool secure);
 	/* Try to soft recover the ring to make the fence signal */
 	void (*soft_recovery)(struct amdgpu_ring *ring, unsigned vmid);
 	int (*preempt_ib)(struct amdgpu_ring *ring);
+	void (*emit_mem_sync)(struct amdgpu_ring *ring);
 };
 
 struct amdgpu_ring {
@@ -214,12 +240,12 @@ struct amdgpu_ring {
 	unsigned		vm_inv_eng;
 	struct dma_fence	*vmid_wait;
 	bool			has_compute_vm_bug;
+	bool			no_scheduler;
 
 	atomic_t		num_jobs[DRM_SCHED_PRIORITY_MAX];
 	struct mutex		priority_mutex;
 	/* protected by priority_mutex */
 	int			priority;
-	bool			has_high_prio;
 
 #if defined(CONFIG_DEBUG_FS)
 	struct dentry *ent;
@@ -241,11 +267,11 @@ struct amdgpu_ring {
 #define amdgpu_ring_emit_hdp_flush(r) (r)->funcs->emit_hdp_flush((r))
 #define amdgpu_ring_emit_switch_buffer(r) (r)->funcs->emit_switch_buffer((r))
 #define amdgpu_ring_emit_cntxcntl(r, d) (r)->funcs->emit_cntxcntl((r), (d))
-#define amdgpu_ring_emit_rreg(r, d) (r)->funcs->emit_rreg((r), (d))
+#define amdgpu_ring_emit_rreg(r, d, o) (r)->funcs->emit_rreg((r), (d), (o))
 #define amdgpu_ring_emit_wreg(r, d, v) (r)->funcs->emit_wreg((r), (d), (v))
 #define amdgpu_ring_emit_reg_wait(r, d, v, m) (r)->funcs->emit_reg_wait((r), (d), (v), (m))
 #define amdgpu_ring_emit_reg_write_reg_wait(r, d0, d1, v, m) (r)->funcs->emit_reg_write_reg_wait((r), (d0), (d1), (v), (m))
-#define amdgpu_ring_emit_tmz(r, b) (r)->funcs->emit_tmz((r), (b))
+#define amdgpu_ring_emit_frame_cntl(r, b, s) (r)->funcs->emit_frame_cntl((r), (b), (s))
 #define amdgpu_ring_pad_ib(r, ib) ((r)->funcs->pad_ib((r), (ib)))
 #define amdgpu_ring_init_cond_exec(r) (r)->funcs->init_cond_exec((r))
 #define amdgpu_ring_patch_cond_exec(r,o) (r)->funcs->patch_cond_exec((r),(o))
@@ -257,8 +283,8 @@ void amdgpu_ring_generic_pad_ib(struct amdgpu_ring *ring, struct amdgpu_ib *ib);
 void amdgpu_ring_commit(struct amdgpu_ring *ring);
 void amdgpu_ring_undo(struct amdgpu_ring *ring);
 int amdgpu_ring_init(struct amdgpu_device *adev, struct amdgpu_ring *ring,
-		     unsigned ring_size, struct amdgpu_irq_src *irq_src,
-		     unsigned irq_type);
+		     unsigned int ring_size, struct amdgpu_irq_src *irq_src,
+		     unsigned int irq_type, unsigned int prio);
 void amdgpu_ring_fini(struct amdgpu_ring *ring);
 void amdgpu_ring_emit_reg_write_reg_wait_helper(struct amdgpu_ring *ring,
 						uint32_t reg0, uint32_t val0,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.h
index 4b352206354b..e5b8fb8e75c5 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.h
@@ -61,8 +61,6 @@ struct amdgpu_sdma_ras_funcs {
 
 struct amdgpu_sdma {
 	struct amdgpu_sdma_instance instance[AMDGPU_MAX_SDMA_INSTANCES];
-	struct drm_gpu_scheduler    *sdma_sched[AMDGPU_MAX_SDMA_INSTANCES];
-	uint32_t		    num_sdma_sched;
 	struct amdgpu_irq_src	trap_irq;
 	struct amdgpu_irq_src	illegal_inst_irq;
 	struct amdgpu_irq_src	ecc_irq;
@@ -91,7 +89,8 @@ struct amdgpu_buffer_funcs {
 				 /* dst addr in bytes */
 				 uint64_t dst_offset,
 				 /* number of byte to transfer */
-				 uint32_t byte_count);
+				 uint32_t byte_count,
+				 bool tmz);
 
 	/* maximum bytes in a single operation */
 	uint32_t	fill_max_bytes;
@@ -109,7 +108,7 @@ struct amdgpu_buffer_funcs {
 				 uint32_t byte_count);
 };
 
-#define amdgpu_emit_copy_buffer(adev, ib, s, d, b) (adev)->mman.buffer_funcs->emit_copy_buffer((ib),  (s), (d), (b))
+#define amdgpu_emit_copy_buffer(adev, ib, s, d, b, t) (adev)->mman.buffer_funcs->emit_copy_buffer((ib),  (s), (d), (b), (t))
 #define amdgpu_emit_fill_buffer(adev, ib, s, d, b) (adev)->mman.buffer_funcs->emit_fill_buffer((ib), (s), (d), (b))
 
 struct amdgpu_sdma_instance *
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c
index b86392253696..b87ca171986a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c
@@ -249,6 +249,11 @@ int amdgpu_sync_resv(struct amdgpu_device *adev, struct amdgpu_sync *sync,
 		    owner != AMDGPU_FENCE_OWNER_UNDEFINED)
 			continue;
 
+		/* Never sync to VM updates either. */
+		if (fence_owner == AMDGPU_FENCE_OWNER_VM &&
+		    owner != AMDGPU_FENCE_OWNER_UNDEFINED)
+			continue;
+
 		/* Ignore fences depending on the sync mode */
 		switch (mode) {
 		case AMDGPU_SYNC_ALWAYS:
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c
index b158230af8db..2f4d5ca9894f 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c
@@ -44,7 +44,7 @@ static void amdgpu_do_test_moves(struct amdgpu_device *adev)
 	/* Number of tests =
 	 * (Total GTT - IB pool - writeback page - ring buffers) / test size
 	 */
-	n = adev->gmc.gart_size - AMDGPU_IB_POOL_SIZE*64*1024;
+	n = adev->gmc.gart_size - AMDGPU_IB_POOL_SIZE;
 	for (i = 0; i < AMDGPU_MAX_RINGS; ++i)
 		if (adev->rings[i])
 			n -= adev->rings[i]->ring_size;
@@ -124,7 +124,7 @@ static void amdgpu_do_test_moves(struct amdgpu_device *adev)
 		amdgpu_bo_kunmap(gtt_obj[i]);
 
 		r = amdgpu_copy_buffer(ring, gart_addr, vram_addr,
-				       size, NULL, &fence, false, false);
+				       size, NULL, &fence, false, false, false);
 
 		if (r) {
 			DRM_ERROR("Failed GTT->VRAM copy %d\n", i);
@@ -170,7 +170,7 @@ static void amdgpu_do_test_moves(struct amdgpu_device *adev)
 		amdgpu_bo_kunmap(vram_obj);
 
 		r = amdgpu_copy_buffer(ring, vram_addr, gart_addr,
-				       size, NULL, &fence, false, false);
+				       size, NULL, &fence, false, false, false);
 
 		if (r) {
 			DRM_ERROR("Failed VRAM->GTT copy %d\n", i);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h
index 63e734a125fb..5da20fc166d9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h
@@ -35,7 +35,7 @@
 #define AMDGPU_JOB_GET_TIMELINE_NAME(job) \
 	 job->base.s_fence->finished.ops->get_timeline_name(&job->base.s_fence->finished)
 
-TRACE_EVENT(amdgpu_mm_rreg,
+TRACE_EVENT(amdgpu_device_rreg,
 	    TP_PROTO(unsigned did, uint32_t reg, uint32_t value),
 	    TP_ARGS(did, reg, value),
 	    TP_STRUCT__entry(
@@ -54,7 +54,7 @@ TRACE_EVENT(amdgpu_mm_rreg,
 		      (unsigned long)__entry->value)
 );
 
-TRACE_EVENT(amdgpu_mm_wreg,
+TRACE_EVENT(amdgpu_device_wreg,
 	    TP_PROTO(unsigned did, uint32_t reg, uint32_t value),
 	    TP_ARGS(did, reg, value),
 	    TP_STRUCT__entry(
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 6309ff72bd78..d5543c25f3c7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -62,11 +62,6 @@
 
 #define AMDGPU_TTM_VRAM_MAX_DW_READ	(size_t)128
 
-static int amdgpu_map_buffer(struct ttm_buffer_object *bo,
-			     struct ttm_mem_reg *mem, unsigned num_pages,
-			     uint64_t offset, unsigned window,
-			     struct amdgpu_ring *ring,
-			     uint64_t *addr);
 
 /**
  * amdgpu_init_mem_type - Initialize a memory manager for a specific type of
@@ -277,7 +272,7 @@ static uint64_t amdgpu_mm_node_addr(struct ttm_buffer_object *bo,
  *
  */
 static struct drm_mm_node *amdgpu_find_mm_node(struct ttm_mem_reg *mem,
-					       unsigned long *offset)
+					       uint64_t *offset)
 {
 	struct drm_mm_node *mm_node = mem->mm_node;
 
@@ -288,92 +283,192 @@ static struct drm_mm_node *amdgpu_find_mm_node(struct ttm_mem_reg *mem,
 	return mm_node;
 }
 
+/**
+ * amdgpu_ttm_map_buffer - Map memory into the GART windows
+ * @bo: buffer object to map
+ * @mem: memory object to map
+ * @mm_node: drm_mm node object to map
+ * @num_pages: number of pages to map
+ * @offset: offset into @mm_node where to start
+ * @window: which GART window to use
+ * @ring: DMA ring to use for the copy
+ * @tmz: if we should setup a TMZ enabled mapping
+ * @addr: resulting address inside the MC address space
+ *
+ * Setup one of the GART windows to access a specific piece of memory or return
+ * the physical address for local memory.
+ */
+static int amdgpu_ttm_map_buffer(struct ttm_buffer_object *bo,
+				 struct ttm_mem_reg *mem,
+				 struct drm_mm_node *mm_node,
+				 unsigned num_pages, uint64_t offset,
+				 unsigned window, struct amdgpu_ring *ring,
+				 bool tmz, uint64_t *addr)
+{
+	struct amdgpu_device *adev = ring->adev;
+	struct amdgpu_job *job;
+	unsigned num_dw, num_bytes;
+	struct dma_fence *fence;
+	uint64_t src_addr, dst_addr;
+	void *cpu_addr;
+	uint64_t flags;
+	unsigned int i;
+	int r;
+
+	BUG_ON(adev->mman.buffer_funcs->copy_max_bytes <
+	       AMDGPU_GTT_MAX_TRANSFER_SIZE * 8);
+
+	/* Map only what can't be accessed directly */
+	if (!tmz && mem->start != AMDGPU_BO_INVALID_OFFSET) {
+		*addr = amdgpu_mm_node_addr(bo, mm_node, mem) + offset;
+		return 0;
+	}
+
+	*addr = adev->gmc.gart_start;
+	*addr += (u64)window * AMDGPU_GTT_MAX_TRANSFER_SIZE *
+		AMDGPU_GPU_PAGE_SIZE;
+	*addr += offset & ~PAGE_MASK;
+
+	num_dw = ALIGN(adev->mman.buffer_funcs->copy_num_dw, 8);
+	num_bytes = num_pages * 8;
+
+	r = amdgpu_job_alloc_with_ib(adev, num_dw * 4 + num_bytes,
+				     AMDGPU_IB_POOL_DELAYED, &job);
+	if (r)
+		return r;
+
+	src_addr = num_dw * 4;
+	src_addr += job->ibs[0].gpu_addr;
+
+	dst_addr = amdgpu_bo_gpu_offset(adev->gart.bo);
+	dst_addr += window * AMDGPU_GTT_MAX_TRANSFER_SIZE * 8;
+	amdgpu_emit_copy_buffer(adev, &job->ibs[0], src_addr,
+				dst_addr, num_bytes, false);
+
+	amdgpu_ring_pad_ib(ring, &job->ibs[0]);
+	WARN_ON(job->ibs[0].length_dw > num_dw);
+
+	flags = amdgpu_ttm_tt_pte_flags(adev, bo->ttm, mem);
+	if (tmz)
+		flags |= AMDGPU_PTE_TMZ;
+
+	cpu_addr = &job->ibs[0].ptr[num_dw];
+
+	if (mem->mem_type == TTM_PL_TT) {
+		struct ttm_dma_tt *dma;
+		dma_addr_t *dma_address;
+
+		dma = container_of(bo->ttm, struct ttm_dma_tt, ttm);
+		dma_address = &dma->dma_address[offset >> PAGE_SHIFT];
+		r = amdgpu_gart_map(adev, 0, num_pages, dma_address, flags,
+				    cpu_addr);
+		if (r)
+			goto error_free;
+	} else {
+		dma_addr_t dma_address;
+
+		dma_address = (mm_node->start << PAGE_SHIFT) + offset;
+		dma_address += adev->vm_manager.vram_base_offset;
+
+		for (i = 0; i < num_pages; ++i) {
+			r = amdgpu_gart_map(adev, i << PAGE_SHIFT, 1,
+					    &dma_address, flags, cpu_addr);
+			if (r)
+				goto error_free;
+
+			dma_address += PAGE_SIZE;
+		}
+	}
+
+	r = amdgpu_job_submit(job, &adev->mman.entity,
+			      AMDGPU_FENCE_OWNER_UNDEFINED, &fence);
+	if (r)
+		goto error_free;
+
+	dma_fence_put(fence);
+
+	return r;
+
+error_free:
+	amdgpu_job_free(job);
+	return r;
+}
+
 /**
  * amdgpu_copy_ttm_mem_to_mem - Helper function for copy
+ * @adev: amdgpu device
+ * @src: buffer/address where to read from
+ * @dst: buffer/address where to write to
+ * @size: number of bytes to copy
+ * @tmz: if a secure copy should be used
+ * @resv: resv object to sync to
+ * @f: Returns the last fence if multiple jobs are submitted.
  *
  * The function copies @size bytes from {src->mem + src->offset} to
  * {dst->mem + dst->offset}. src->bo and dst->bo could be same BO for a
  * move and different for a BO to BO copy.
  *
- * @f: Returns the last fence if multiple jobs are submitted.
  */
 int amdgpu_ttm_copy_mem_to_mem(struct amdgpu_device *adev,
-			       struct amdgpu_copy_mem *src,
-			       struct amdgpu_copy_mem *dst,
-			       uint64_t size,
+			       const struct amdgpu_copy_mem *src,
+			       const struct amdgpu_copy_mem *dst,
+			       uint64_t size, bool tmz,
 			       struct dma_resv *resv,
 			       struct dma_fence **f)
 {
+	const uint32_t GTT_MAX_BYTES = (AMDGPU_GTT_MAX_TRANSFER_SIZE *
+					AMDGPU_GPU_PAGE_SIZE);
+
+	uint64_t src_node_size, dst_node_size, src_offset, dst_offset;
 	struct amdgpu_ring *ring = adev->mman.buffer_funcs_ring;
 	struct drm_mm_node *src_mm, *dst_mm;
-	uint64_t src_node_start, dst_node_start, src_node_size,
-		 dst_node_size, src_page_offset, dst_page_offset;
 	struct dma_fence *fence = NULL;
 	int r = 0;
-	const uint64_t GTT_MAX_BYTES = (AMDGPU_GTT_MAX_TRANSFER_SIZE *
-					AMDGPU_GPU_PAGE_SIZE);
 
 	if (!adev->mman.buffer_funcs_enabled) {
 		DRM_ERROR("Trying to move memory with ring turned off.\n");
 		return -EINVAL;
 	}
 
-	src_mm = amdgpu_find_mm_node(src->mem, &src->offset);
-	src_node_start = amdgpu_mm_node_addr(src->bo, src_mm, src->mem) +
-					     src->offset;
-	src_node_size = (src_mm->size << PAGE_SHIFT) - src->offset;
-	src_page_offset = src_node_start & (PAGE_SIZE - 1);
+	src_offset = src->offset;
+	src_mm = amdgpu_find_mm_node(src->mem, &src_offset);
+	src_node_size = (src_mm->size << PAGE_SHIFT) - src_offset;
 
-	dst_mm = amdgpu_find_mm_node(dst->mem, &dst->offset);
-	dst_node_start = amdgpu_mm_node_addr(dst->bo, dst_mm, dst->mem) +
-					     dst->offset;
-	dst_node_size = (dst_mm->size << PAGE_SHIFT) - dst->offset;
-	dst_page_offset = dst_node_start & (PAGE_SIZE - 1);
+	dst_offset = dst->offset;
+	dst_mm = amdgpu_find_mm_node(dst->mem, &dst_offset);
+	dst_node_size = (dst_mm->size << PAGE_SHIFT) - dst_offset;
 
 	mutex_lock(&adev->mman.gtt_window_lock);
 
 	while (size) {
-		unsigned long cur_size;
-		uint64_t from = src_node_start, to = dst_node_start;
+		uint32_t src_page_offset = src_offset & ~PAGE_MASK;
+		uint32_t dst_page_offset = dst_offset & ~PAGE_MASK;
 		struct dma_fence *next;
+		uint32_t cur_size;
+		uint64_t from, to;
 
 		/* Copy size cannot exceed GTT_MAX_BYTES. So if src or dst
 		 * begins at an offset, then adjust the size accordingly
 		 */
-		cur_size = min3(min(src_node_size, dst_node_size), size,
-				GTT_MAX_BYTES);
-		if (cur_size + src_page_offset > GTT_MAX_BYTES ||
-		    cur_size + dst_page_offset > GTT_MAX_BYTES)
-			cur_size -= max(src_page_offset, dst_page_offset);
-
-		/* Map only what needs to be accessed. Map src to window 0 and
-		 * dst to window 1
-		 */
-		if (src->mem->start == AMDGPU_BO_INVALID_OFFSET) {
-			r = amdgpu_map_buffer(src->bo, src->mem,
-					PFN_UP(cur_size + src_page_offset),
-					src_node_start, 0, ring,
-					&from);
-			if (r)
-				goto error;
-			/* Adjust the offset because amdgpu_map_buffer returns
-			 * start of mapped page
-			 */
-			from += src_page_offset;
-		}
+		cur_size = max(src_page_offset, dst_page_offset);
+		cur_size = min(min3(src_node_size, dst_node_size, size),
+			       (uint64_t)(GTT_MAX_BYTES - cur_size));
+
+		/* Map src to window 0 and dst to window 1. */
+		r = amdgpu_ttm_map_buffer(src->bo, src->mem, src_mm,
+					  PFN_UP(cur_size + src_page_offset),
+					  src_offset, 0, ring, tmz, &from);
+		if (r)
+			goto error;
 
-		if (dst->mem->start == AMDGPU_BO_INVALID_OFFSET) {
-			r = amdgpu_map_buffer(dst->bo, dst->mem,
-					PFN_UP(cur_size + dst_page_offset),
-					dst_node_start, 1, ring,
-					&to);
-			if (r)
-				goto error;
-			to += dst_page_offset;
-		}
+		r = amdgpu_ttm_map_buffer(dst->bo, dst->mem, dst_mm,
+					  PFN_UP(cur_size + dst_page_offset),
+					  dst_offset, 1, ring, tmz, &to);
+		if (r)
+			goto error;
 
 		r = amdgpu_copy_buffer(ring, from, to, cur_size,
-				       resv, &next, false, true);
+				       resv, &next, false, true, tmz);
 		if (r)
 			goto error;
 
@@ -386,23 +481,20 @@ int amdgpu_ttm_copy_mem_to_mem(struct amdgpu_device *adev,
 
 		src_node_size -= cur_size;
 		if (!src_node_size) {
-			src_node_start = amdgpu_mm_node_addr(src->bo, ++src_mm,
-							     src->mem);
-			src_node_size = (src_mm->size << PAGE_SHIFT);
-			src_page_offset = 0;
+			++src_mm;
+			src_node_size = src_mm->size << PAGE_SHIFT;
+			src_offset = 0;
 		} else {
-			src_node_start += cur_size;
-			src_page_offset = src_node_start & (PAGE_SIZE - 1);
+			src_offset += cur_size;
 		}
+
 		dst_node_size -= cur_size;
 		if (!dst_node_size) {
-			dst_node_start = amdgpu_mm_node_addr(dst->bo, ++dst_mm,
-							     dst->mem);
-			dst_node_size = (dst_mm->size << PAGE_SHIFT);
-			dst_page_offset = 0;
+			++dst_mm;
+			dst_node_size = dst_mm->size << PAGE_SHIFT;
+			dst_offset = 0;
 		} else {
-			dst_node_start += cur_size;
-			dst_page_offset = dst_node_start & (PAGE_SIZE - 1);
+			dst_offset += cur_size;
 		}
 	}
 error:
@@ -425,6 +517,7 @@ static int amdgpu_move_blit(struct ttm_buffer_object *bo,
 			    struct ttm_mem_reg *old_mem)
 {
 	struct amdgpu_device *adev = amdgpu_ttm_adev(bo->bdev);
+	struct amdgpu_bo *abo = ttm_to_amdgpu_bo(bo);
 	struct amdgpu_copy_mem src, dst;
 	struct dma_fence *fence = NULL;
 	int r;
@@ -438,14 +531,14 @@ static int amdgpu_move_blit(struct ttm_buffer_object *bo,
 
 	r = amdgpu_ttm_copy_mem_to_mem(adev, &src, &dst,
 				       new_mem->num_pages << PAGE_SHIFT,
+				       amdgpu_bo_encrypted(abo),
 				       bo->base.resv, &fence);
 	if (r)
 		goto error;
 
 	/* clear the space being freed */
 	if (old_mem->mem_type == TTM_PL_VRAM &&
-	    (ttm_to_amdgpu_bo(bo)->flags &
-	     AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE)) {
+	    (abo->flags & AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE)) {
 		struct dma_fence *wipe_fence = NULL;
 
 		r = amdgpu_fill_buffer(ttm_to_amdgpu_bo(bo), AMDGPU_POISON,
@@ -742,8 +835,8 @@ static void amdgpu_ttm_io_mem_free(struct ttm_bo_device *bdev, struct ttm_mem_re
 static unsigned long amdgpu_ttm_io_mem_pfn(struct ttm_buffer_object *bo,
 					   unsigned long page_offset)
 {
+	uint64_t offset = (page_offset << PAGE_SHIFT);
 	struct drm_mm_node *mm;
-	unsigned long offset = (page_offset << PAGE_SHIFT);
 
 	mm = amdgpu_find_mm_node(&bo->mem, &offset);
 	return (bo->mem.bus.base >> PAGE_SHIFT) + mm->start +
@@ -1027,6 +1120,9 @@ int amdgpu_ttm_gart_bind(struct amdgpu_device *adev,
 	struct amdgpu_ttm_tt *gtt = (void *)ttm;
 	int r;
 
+	if (amdgpu_bo_encrypted(abo))
+		flags |= AMDGPU_PTE_TMZ;
+
 	if (abo->flags & AMDGPU_GEM_CREATE_CP_MQD_GFX9) {
 		uint64_t page_idx = 1;
 
@@ -1539,6 +1635,9 @@ static bool amdgpu_ttm_bo_eviction_valuable(struct ttm_buffer_object *bo,
 
 	switch (bo->mem.mem_type) {
 	case TTM_PL_TT:
+		if (amdgpu_bo_is_amdgpu_bo(bo) &&
+		    amdgpu_bo_encrypted(ttm_to_amdgpu_bo(bo)))
+			return false;
 		return true;
 
 	case TTM_PL_VRAM:
@@ -1587,8 +1686,9 @@ static int amdgpu_ttm_access_memory(struct ttm_buffer_object *bo,
 	if (bo->mem.mem_type != TTM_PL_VRAM)
 		return -EIO;
 
-	nodes = amdgpu_find_mm_node(&abo->tbo.mem, &offset);
-	pos = (nodes->start << PAGE_SHIFT) + offset;
+	pos = offset;
+	nodes = amdgpu_find_mm_node(&abo->tbo.mem, &pos);
+	pos += (nodes->start << PAGE_SHIFT);
 
 	while (len && pos < adev->gmc.mc_vram_size) {
 		uint64_t aligned_pos = pos & ~(uint64_t)3;
@@ -2015,75 +2115,14 @@ int amdgpu_mmap(struct file *filp, struct vm_area_struct *vma)
 	return ttm_bo_mmap(filp, vma, &adev->mman.bdev);
 }
 
-static int amdgpu_map_buffer(struct ttm_buffer_object *bo,
-			     struct ttm_mem_reg *mem, unsigned num_pages,
-			     uint64_t offset, unsigned window,
-			     struct amdgpu_ring *ring,
-			     uint64_t *addr)
-{
-	struct amdgpu_ttm_tt *gtt = (void *)bo->ttm;
-	struct amdgpu_device *adev = ring->adev;
-	struct ttm_tt *ttm = bo->ttm;
-	struct amdgpu_job *job;
-	unsigned num_dw, num_bytes;
-	dma_addr_t *dma_address;
-	struct dma_fence *fence;
-	uint64_t src_addr, dst_addr;
-	uint64_t flags;
-	int r;
-
-	BUG_ON(adev->mman.buffer_funcs->copy_max_bytes <
-	       AMDGPU_GTT_MAX_TRANSFER_SIZE * 8);
-
-	*addr = adev->gmc.gart_start;
-	*addr += (u64)window * AMDGPU_GTT_MAX_TRANSFER_SIZE *
-		AMDGPU_GPU_PAGE_SIZE;
-
-	num_dw = ALIGN(adev->mman.buffer_funcs->copy_num_dw, 8);
-	num_bytes = num_pages * 8;
-
-	r = amdgpu_job_alloc_with_ib(adev, num_dw * 4 + num_bytes, &job);
-	if (r)
-		return r;
-
-	src_addr = num_dw * 4;
-	src_addr += job->ibs[0].gpu_addr;
-
-	dst_addr = amdgpu_bo_gpu_offset(adev->gart.bo);
-	dst_addr += window * AMDGPU_GTT_MAX_TRANSFER_SIZE * 8;
-	amdgpu_emit_copy_buffer(adev, &job->ibs[0], src_addr,
-				dst_addr, num_bytes);
-
-	amdgpu_ring_pad_ib(ring, &job->ibs[0]);
-	WARN_ON(job->ibs[0].length_dw > num_dw);
-
-	dma_address = &gtt->ttm.dma_address[offset >> PAGE_SHIFT];
-	flags = amdgpu_ttm_tt_pte_flags(adev, ttm, mem);
-	r = amdgpu_gart_map(adev, 0, num_pages, dma_address, flags,
-			    &job->ibs[0].ptr[num_dw]);
-	if (r)
-		goto error_free;
-
-	r = amdgpu_job_submit(job, &adev->mman.entity,
-			      AMDGPU_FENCE_OWNER_UNDEFINED, &fence);
-	if (r)
-		goto error_free;
-
-	dma_fence_put(fence);
-
-	return r;
-
-error_free:
-	amdgpu_job_free(job);
-	return r;
-}
-
 int amdgpu_copy_buffer(struct amdgpu_ring *ring, uint64_t src_offset,
 		       uint64_t dst_offset, uint32_t byte_count,
 		       struct dma_resv *resv,
 		       struct dma_fence **fence, bool direct_submit,
-		       bool vm_needs_flush)
+		       bool vm_needs_flush, bool tmz)
 {
+	enum amdgpu_ib_pool_type pool = direct_submit ? AMDGPU_IB_POOL_DIRECT :
+		AMDGPU_IB_POOL_DELAYED;
 	struct amdgpu_device *adev = ring->adev;
 	struct amdgpu_job *job;
 
@@ -2101,7 +2140,7 @@ int amdgpu_copy_buffer(struct amdgpu_ring *ring, uint64_t src_offset,
 	num_loops = DIV_ROUND_UP(byte_count, max_bytes);
 	num_dw = ALIGN(num_loops * adev->mman.buffer_funcs->copy_num_dw, 8);
 
-	r = amdgpu_job_alloc_with_ib(adev, num_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(adev, num_dw * 4, pool, &job);
 	if (r)
 		return r;
 
@@ -2123,7 +2162,7 @@ int amdgpu_copy_buffer(struct amdgpu_ring *ring, uint64_t src_offset,
 		uint32_t cur_size_in_bytes = min(byte_count, max_bytes);
 
 		amdgpu_emit_copy_buffer(adev, &job->ibs[0], src_offset,
-					dst_offset, cur_size_in_bytes);
+					dst_offset, cur_size_in_bytes, tmz);
 
 		src_offset += cur_size_in_bytes;
 		dst_offset += cur_size_in_bytes;
@@ -2190,7 +2229,8 @@ int amdgpu_fill_buffer(struct amdgpu_bo *bo,
 	/* for IB padding */
 	num_dw += 64;
 
-	r = amdgpu_job_alloc_with_ib(adev, num_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(adev, num_dw * 4, AMDGPU_IB_POOL_DELAYED,
+				     &job);
 	if (r)
 		return r;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h
index bd05bbb4878d..4351d02644a7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h
@@ -24,8 +24,9 @@
 #ifndef __AMDGPU_TTM_H__
 #define __AMDGPU_TTM_H__
 
-#include "amdgpu.h"
+#include <linux/dma-direction.h>
 #include <drm/gpu_scheduler.h>
+#include "amdgpu.h"
 
 #define AMDGPU_PL_GDS		(TTM_PL_PRIV + 0)
 #define AMDGPU_PL_GWS		(TTM_PL_PRIV + 1)
@@ -74,6 +75,15 @@ uint64_t amdgpu_gtt_mgr_usage(struct ttm_mem_type_manager *man);
 int amdgpu_gtt_mgr_recover(struct ttm_mem_type_manager *man);
 
 u64 amdgpu_vram_mgr_bo_visible_size(struct amdgpu_bo *bo);
+int amdgpu_vram_mgr_alloc_sgt(struct amdgpu_device *adev,
+			      struct ttm_mem_reg *mem,
+			      struct device *dev,
+			      enum dma_data_direction dir,
+			      struct sg_table **sgt);
+void amdgpu_vram_mgr_free_sgt(struct amdgpu_device *adev,
+			      struct device *dev,
+			      enum dma_data_direction dir,
+			      struct sg_table *sgt);
 uint64_t amdgpu_vram_mgr_usage(struct ttm_mem_type_manager *man);
 uint64_t amdgpu_vram_mgr_vis_usage(struct ttm_mem_type_manager *man);
 
@@ -87,11 +97,11 @@ int amdgpu_copy_buffer(struct amdgpu_ring *ring, uint64_t src_offset,
 		       uint64_t dst_offset, uint32_t byte_count,
 		       struct dma_resv *resv,
 		       struct dma_fence **fence, bool direct_submit,
-		       bool vm_needs_flush);
+		       bool vm_needs_flush, bool tmz);
 int amdgpu_ttm_copy_mem_to_mem(struct amdgpu_device *adev,
-			       struct amdgpu_copy_mem *src,
-			       struct amdgpu_copy_mem *dst,
-			       uint64_t size,
+			       const struct amdgpu_copy_mem *src,
+			       const struct amdgpu_copy_mem *dst,
+			       uint64_t size, bool tmz,
 			       struct dma_resv *resv,
 			       struct dma_fence **f);
 int amdgpu_fill_buffer(struct amdgpu_bo *bo,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
index 9ef312428231..65bb25e31d45 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
@@ -403,8 +403,8 @@ FW_VERSION_ATTR(mec_fw_version, 0444, gfx.mec_fw_version);
 FW_VERSION_ATTR(mec2_fw_version, 0444, gfx.mec2_fw_version);
 FW_VERSION_ATTR(sos_fw_version, 0444, psp.sos_fw_version);
 FW_VERSION_ATTR(asd_fw_version, 0444, psp.asd_fw_version);
-FW_VERSION_ATTR(ta_ras_fw_version, 0444, psp.ta_fw_version);
-FW_VERSION_ATTR(ta_xgmi_fw_version, 0444, psp.ta_fw_version);
+FW_VERSION_ATTR(ta_ras_fw_version, 0444, psp.ta_ras_ucode_version);
+FW_VERSION_ATTR(ta_xgmi_fw_version, 0444, psp.ta_xgmi_ucode_version);
 FW_VERSION_ATTR(smc_fw_version, 0444, pm.fw_version);
 FW_VERSION_ATTR(sdma_fw_version, 0444, sdma.instance[0].fw_version);
 FW_VERSION_ATTR(sdma2_fw_version, 0444, sdma.instance[1].fw_version);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c
index 9dd51f0d2c11..af1b1ccf613c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c
@@ -110,7 +110,8 @@ int amdgpu_umc_process_ras_data_cb(struct amdgpu_device *adev,
 		 * even NOMEM error is encountered
 		 */
 		if(!err_data->err_addr)
-			DRM_WARN("Failed to alloc memory for umc error address record!\n");
+			dev_warn(adev->dev, "Failed to alloc memory for "
+					"umc error address record!\n");
 
 		/* umc query_ras_error_address is also responsible for clearing
 		 * error status
@@ -120,10 +121,14 @@ int amdgpu_umc_process_ras_data_cb(struct amdgpu_device *adev,
 
 	/* only uncorrectable error needs gpu reset */
 	if (err_data->ue_count) {
+		dev_info(adev->dev, "%ld uncorrectable hardware errors "
+				"detected in UMC block\n",
+				err_data->ue_count);
+
 		if (err_data->err_addr_cnt &&
 		    amdgpu_ras_add_bad_pages(adev, err_data->err_addr,
 						err_data->err_addr_cnt))
-			DRM_WARN("Failed to add ras bad page!\n");
+			dev_warn(adev->dev, "Failed to add ras bad page!\n");
 
 		amdgpu_ras_reset_gpu(adev);
 	}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
index 5fd32ad1c575..5100ebe8858d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
@@ -1056,7 +1056,8 @@ static int amdgpu_uvd_send_msg(struct amdgpu_ring *ring, struct amdgpu_bo *bo,
 			goto err;
 	}
 
-	r = amdgpu_job_alloc_with_ib(adev, 64, &job);
+	r = amdgpu_job_alloc_with_ib(adev, 64, direct ? AMDGPU_IB_POOL_DIRECT :
+				     AMDGPU_IB_POOL_DELAYED, &job);
 	if (r)
 		goto err;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c
index 59ddba137946..ecaa2d7483b2 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c
@@ -446,7 +446,8 @@ static int amdgpu_vce_get_create_msg(struct amdgpu_ring *ring, uint32_t handle,
 	uint64_t addr;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4,
+				     AMDGPU_IB_POOL_DIRECT, &job);
 	if (r)
 		return r;
 
@@ -524,7 +525,9 @@ static int amdgpu_vce_get_destroy_msg(struct amdgpu_ring *ring, uint32_t handle,
 	struct dma_fence *f = NULL;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4,
+				     direct ? AMDGPU_IB_POOL_DIRECT :
+				     AMDGPU_IB_POOL_DELAYED, &job);
 	if (r)
 		return r;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
index a41272fbcba2..2de99b441601 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
@@ -56,13 +56,17 @@ static void amdgpu_vcn_idle_work_handler(struct work_struct *work);
 
 int amdgpu_vcn_sw_init(struct amdgpu_device *adev)
 {
-	unsigned long bo_size;
+	unsigned long bo_size, fw_shared_bo_size;
 	const char *fw_name;
 	const struct common_firmware_header *hdr;
 	unsigned char fw_check;
 	int i, r;
 
 	INIT_DELAYED_WORK(&adev->vcn.idle_work, amdgpu_vcn_idle_work_handler);
+	mutex_init(&adev->vcn.vcn_pg_lock);
+	atomic_set(&adev->vcn.total_submission_cnt, 0);
+	for (i = 0; i < adev->vcn.num_vcn_inst; i++)
+		atomic_set(&adev->vcn.inst[i].dpg_enc_submission_cnt, 0);
 
 	switch (adev->asic_type) {
 	case CHIP_RAVEN:
@@ -178,6 +182,17 @@ int amdgpu_vcn_sw_init(struct amdgpu_device *adev)
 				return r;
 			}
 		}
+
+		r = amdgpu_bo_create_kernel(adev, AMDGPU_GPU_PAGE_ALIGN(sizeof(struct amdgpu_fw_shared)),
+				PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM, &adev->vcn.inst[i].fw_shared_bo,
+				&adev->vcn.inst[i].fw_shared_gpu_addr, &adev->vcn.inst[i].fw_shared_cpu_addr);
+		if (r) {
+			dev_err(adev->dev, "VCN %d (%d) failed to allocate firmware shared bo\n", i, r);
+			return r;
+		}
+
+		fw_shared_bo_size = amdgpu_bo_size(adev->vcn.inst[i].fw_shared_bo);
+		adev->vcn.inst[i].saved_shm_bo = kvmalloc(fw_shared_bo_size, GFP_KERNEL);
 	}
 
 	return 0;
@@ -192,6 +207,12 @@ int amdgpu_vcn_sw_fini(struct amdgpu_device *adev)
 	for (j = 0; j < adev->vcn.num_vcn_inst; ++j) {
 		if (adev->vcn.harvest_config & (1 << j))
 			continue;
+
+		kvfree(adev->vcn.inst[j].saved_shm_bo);
+		amdgpu_bo_free_kernel(&adev->vcn.inst[j].fw_shared_bo,
+					  &adev->vcn.inst[j].fw_shared_gpu_addr,
+					  (void **)&adev->vcn.inst[j].fw_shared_cpu_addr);
+
 		if (adev->vcn.indirect_sram) {
 			amdgpu_bo_free_kernel(&adev->vcn.inst[j].dpg_sram_bo,
 						  &adev->vcn.inst[j].dpg_sram_gpu_addr,
@@ -210,6 +231,7 @@ int amdgpu_vcn_sw_fini(struct amdgpu_device *adev)
 	}
 
 	release_firmware(adev->vcn.fw);
+	mutex_destroy(&adev->vcn.vcn_pg_lock);
 
 	return 0;
 }
@@ -236,6 +258,17 @@ int amdgpu_vcn_suspend(struct amdgpu_device *adev)
 			return -ENOMEM;
 
 		memcpy_fromio(adev->vcn.inst[i].saved_bo, ptr, size);
+
+		if (adev->vcn.inst[i].fw_shared_bo == NULL)
+			return 0;
+
+		if (!adev->vcn.inst[i].saved_shm_bo)
+			return -ENOMEM;
+
+		size = amdgpu_bo_size(adev->vcn.inst[i].fw_shared_bo);
+		ptr = adev->vcn.inst[i].fw_shared_cpu_addr;
+
+		memcpy_fromio(adev->vcn.inst[i].saved_shm_bo, ptr, size);
 	}
 	return 0;
 }
@@ -273,6 +306,17 @@ int amdgpu_vcn_resume(struct amdgpu_device *adev)
 			}
 			memset_io(ptr, 0, size);
 		}
+
+		if (adev->vcn.inst[i].fw_shared_bo == NULL)
+			return -EINVAL;
+
+		size = amdgpu_bo_size(adev->vcn.inst[i].fw_shared_bo);
+		ptr = adev->vcn.inst[i].fw_shared_cpu_addr;
+
+		if (adev->vcn.inst[i].saved_shm_bo != NULL)
+			memcpy_toio(ptr, adev->vcn.inst[i].saved_shm_bo, size);
+		else
+			memset_io(ptr, 0, size);
 	}
 	return 0;
 }
@@ -295,7 +339,8 @@ static void amdgpu_vcn_idle_work_handler(struct work_struct *work)
 		if (adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG)	{
 			struct dpg_pause_state new_state;
 
-			if (fence[j])
+			if (fence[j] ||
+				unlikely(atomic_read(&adev->vcn.inst[j].dpg_enc_submission_cnt)))
 				new_state.fw_based = VCN_DPG_STATE__PAUSE;
 			else
 				new_state.fw_based = VCN_DPG_STATE__UNPAUSE;
@@ -307,8 +352,7 @@ static void amdgpu_vcn_idle_work_handler(struct work_struct *work)
 		fences += fence[j];
 	}
 
-	if (fences == 0) {
-		amdgpu_gfx_off_ctrl(adev, true);
+	if (!fences && !atomic_read(&adev->vcn.total_submission_cnt)) {
 		amdgpu_device_ip_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_VCN,
 		       AMD_PG_STATE_GATE);
 	} else {
@@ -319,36 +363,46 @@ static void amdgpu_vcn_idle_work_handler(struct work_struct *work)
 void amdgpu_vcn_ring_begin_use(struct amdgpu_ring *ring)
 {
 	struct amdgpu_device *adev = ring->adev;
-	bool set_clocks = !cancel_delayed_work_sync(&adev->vcn.idle_work);
 
-	if (set_clocks) {
-		amdgpu_gfx_off_ctrl(adev, false);
-		amdgpu_device_ip_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_VCN,
-		       AMD_PG_STATE_UNGATE);
-	}
+	atomic_inc(&adev->vcn.total_submission_cnt);
+	cancel_delayed_work_sync(&adev->vcn.idle_work);
+
+	mutex_lock(&adev->vcn.vcn_pg_lock);
+	amdgpu_device_ip_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_VCN,
+	       AMD_PG_STATE_UNGATE);
 
 	if (adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG)	{
 		struct dpg_pause_state new_state;
-		unsigned int fences = 0;
-		unsigned int i;
 
-		for (i = 0; i < adev->vcn.num_enc_rings; ++i) {
-			fences += amdgpu_fence_count_emitted(&adev->vcn.inst[ring->me].ring_enc[i]);
-		}
-		if (fences)
+		if (ring->funcs->type == AMDGPU_RING_TYPE_VCN_ENC) {
+			atomic_inc(&adev->vcn.inst[ring->me].dpg_enc_submission_cnt);
 			new_state.fw_based = VCN_DPG_STATE__PAUSE;
-		else
-			new_state.fw_based = VCN_DPG_STATE__UNPAUSE;
+		} else {
+			unsigned int fences = 0;
+			unsigned int i;
 
-		if (ring->funcs->type == AMDGPU_RING_TYPE_VCN_ENC)
-			new_state.fw_based = VCN_DPG_STATE__PAUSE;
+			for (i = 0; i < adev->vcn.num_enc_rings; ++i)
+				fences += amdgpu_fence_count_emitted(&adev->vcn.inst[ring->me].ring_enc[i]);
+
+			if (fences || atomic_read(&adev->vcn.inst[ring->me].dpg_enc_submission_cnt))
+				new_state.fw_based = VCN_DPG_STATE__PAUSE;
+			else
+				new_state.fw_based = VCN_DPG_STATE__UNPAUSE;
+		}
 
 		adev->vcn.pause_dpg_mode(adev, ring->me, &new_state);
 	}
+	mutex_unlock(&adev->vcn.vcn_pg_lock);
 }
 
 void amdgpu_vcn_ring_end_use(struct amdgpu_ring *ring)
 {
+	if (ring->adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG &&
+		ring->funcs->type == AMDGPU_RING_TYPE_VCN_ENC)
+		atomic_dec(&ring->adev->vcn.inst[ring->me].dpg_enc_submission_cnt);
+
+	atomic_dec(&ring->adev->vcn.total_submission_cnt);
+
 	schedule_delayed_work(&ring->adev->vcn.idle_work, VCN_IDLE_TIMEOUT);
 }
 
@@ -390,7 +444,8 @@ static int amdgpu_vcn_dec_send_msg(struct amdgpu_ring *ring,
 	uint64_t addr;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(adev, 64, &job);
+	r = amdgpu_job_alloc_with_ib(adev, 64,
+					AMDGPU_IB_POOL_DIRECT, &job);
 	if (r)
 		goto err;
 
@@ -557,7 +612,8 @@ static int amdgpu_vcn_enc_get_create_msg(struct amdgpu_ring *ring, uint32_t hand
 	uint64_t addr;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4,
+					AMDGPU_IB_POOL_DIRECT, &job);
 	if (r)
 		return r;
 
@@ -610,7 +666,8 @@ static int amdgpu_vcn_enc_get_destroy_msg(struct amdgpu_ring *ring, uint32_t han
 	uint64_t addr;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4,
+					AMDGPU_IB_POOL_DIRECT, &job);
 	if (r)
 		return r;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h
index 6fe057329de2..90aa12b22725 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h
@@ -132,6 +132,13 @@
 		}										\
 	} while (0)
 
+#define AMDGPU_VCN_MULTI_QUEUE_FLAG	(1 << 8)
+
+enum fw_queue_mode {
+	FW_QUEUE_RING_RESET = 1,
+	FW_QUEUE_DPG_HOLD_OFF = 2,
+};
+
 enum engine_status_constants {
 	UVD_PGFSM_STATUS__UVDM_UVDU_PWR_ON = 0x2AAAA0,
 	UVD_PGFSM_STATUS__UVDM_UVDU_PWR_ON_2_0 = 0xAAAA0,
@@ -179,10 +186,15 @@ struct amdgpu_vcn_inst {
 	struct amdgpu_irq_src	irq;
 	struct amdgpu_vcn_reg	external;
 	struct amdgpu_bo	*dpg_sram_bo;
+	struct amdgpu_bo	*fw_shared_bo;
 	struct dpg_pause_state	pause_state;
 	void			*dpg_sram_cpu_addr;
 	uint64_t		dpg_sram_gpu_addr;
 	uint32_t		*dpg_sram_curr_addr;
+	atomic_t		dpg_enc_submission_cnt;
+	void			*fw_shared_cpu_addr;
+	uint64_t		fw_shared_gpu_addr;
+	void			*saved_shm_bo;
 };
 
 struct amdgpu_vcn {
@@ -196,16 +208,28 @@ struct amdgpu_vcn {
 	uint8_t	num_vcn_inst;
 	struct amdgpu_vcn_inst	 inst[AMDGPU_MAX_VCN_INSTANCES];
 	struct amdgpu_vcn_reg	 internal;
-	struct drm_gpu_scheduler *vcn_enc_sched[AMDGPU_MAX_VCN_ENC_RINGS];
-	struct drm_gpu_scheduler *vcn_dec_sched[AMDGPU_MAX_VCN_INSTANCES];
-	uint32_t		 num_vcn_enc_sched;
-	uint32_t		 num_vcn_dec_sched;
+	struct mutex		 vcn_pg_lock;
+	atomic_t		 total_submission_cnt;
 
 	unsigned	harvest_config;
 	int (*pause_dpg_mode)(struct amdgpu_device *adev,
 		int inst_idx, struct dpg_pause_state *new_state);
 };
 
+struct amdgpu_fw_shared_multi_queue {
+	uint8_t decode_queue_mode;
+	uint8_t encode_generalpurpose_queue_mode;
+	uint8_t encode_lowlatency_queue_mode;
+	uint8_t encode_realtime_queue_mode;
+	uint8_t padding[4];
+};
+
+struct amdgpu_fw_shared {
+	uint32_t present_flag_0;
+	uint8_t pad[53];
+	struct amdgpu_fw_shared_multi_queue multi_queue;
+} __attribute__((__packed__));
+
 int amdgpu_vcn_sw_init(struct amdgpu_device *adev);
 int amdgpu_vcn_sw_fini(struct amdgpu_device *adev);
 int amdgpu_vcn_suspend(struct amdgpu_device *adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index adc813cde8e2..cbbb8d02535a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -38,7 +38,8 @@ bool amdgpu_virt_mmio_blocked(struct amdgpu_device *adev)
 void amdgpu_virt_init_setting(struct amdgpu_device *adev)
 {
 	/* enable virtual display */
-	adev->mode_info.num_crtc = 1;
+	if (adev->mode_info.num_crtc == 0)
+		adev->mode_info.num_crtc = 1;
 	adev->enable_virtual_display = true;
 	adev->ddev->driver->driver_features &= ~DRIVER_ATOMIC;
 	adev->cg_flags = 0;
@@ -59,7 +60,10 @@ void amdgpu_virt_kiq_reg_write_reg_wait(struct amdgpu_device *adev,
 	amdgpu_ring_alloc(ring, 32);
 	amdgpu_ring_emit_reg_write_reg_wait(ring, reg0, reg1,
 					    ref, mask);
-	amdgpu_fence_emit_polling(ring, &seq);
+	r = amdgpu_fence_emit_polling(ring, &seq, MAX_KIQ_REG_WAIT);
+	if (r)
+		goto failed_undo;
+
 	amdgpu_ring_commit(ring);
 	spin_unlock_irqrestore(&kiq->ring_lock, flags);
 
@@ -81,6 +85,9 @@ void amdgpu_virt_kiq_reg_write_reg_wait(struct amdgpu_device *adev,
 
 	return;
 
+failed_undo:
+	amdgpu_ring_undo(ring);
+	spin_unlock_irqrestore(&kiq->ring_lock, flags);
 failed_kiq:
 	pr_err("failed to write reg %x wait reg %x\n", reg0, reg1);
 }
@@ -152,6 +159,19 @@ int amdgpu_virt_reset_gpu(struct amdgpu_device *adev)
 	return 0;
 }
 
+void amdgpu_virt_request_init_data(struct amdgpu_device *adev)
+{
+	struct amdgpu_virt *virt = &adev->virt;
+
+	if (virt->ops && virt->ops->req_init_data)
+		virt->ops->req_init_data(adev);
+
+	if (adev->virt.req_init_data_ver > 0)
+		DRM_INFO("host supports REQ_INIT_DATA handshake\n");
+	else
+		DRM_WARN("host doesn't support REQ_INIT_DATA handshake\n");
+}
+
 /**
  * amdgpu_virt_wait_reset() - wait for reset gpu completed
  * @amdgpu:	amdgpu device.
@@ -287,3 +307,66 @@ void amdgpu_virt_init_data_exchange(struct amdgpu_device *adev)
 		}
 	}
 }
+
+void amdgpu_detect_virtualization(struct amdgpu_device *adev)
+{
+	uint32_t reg;
+
+	switch (adev->asic_type) {
+	case CHIP_TONGA:
+	case CHIP_FIJI:
+		reg = RREG32(mmBIF_IOV_FUNC_IDENTIFIER);
+		break;
+	case CHIP_VEGA10:
+	case CHIP_VEGA20:
+	case CHIP_NAVI10:
+	case CHIP_NAVI12:
+	case CHIP_ARCTURUS:
+		reg = RREG32(mmRCC_IOV_FUNC_IDENTIFIER);
+		break;
+	default: /* other chip doesn't support SRIOV */
+		reg = 0;
+		break;
+	}
+
+	if (reg & 1)
+		adev->virt.caps |= AMDGPU_SRIOV_CAPS_IS_VF;
+
+	if (reg & 0x80000000)
+		adev->virt.caps |= AMDGPU_SRIOV_CAPS_ENABLE_IOV;
+
+	if (!reg) {
+		if (is_virtual_machine())	/* passthrough mode exclus sriov mod */
+			adev->virt.caps |= AMDGPU_PASSTHROUGH_MODE;
+	}
+}
+
+bool amdgpu_virt_access_debugfs_is_mmio(struct amdgpu_device *adev)
+{
+	return amdgpu_sriov_is_debug(adev) ? true : false;
+}
+
+bool amdgpu_virt_access_debugfs_is_kiq(struct amdgpu_device *adev)
+{
+	return amdgpu_sriov_is_normal(adev) ? true : false;
+}
+
+int amdgpu_virt_enable_access_debugfs(struct amdgpu_device *adev)
+{
+	if (!amdgpu_sriov_vf(adev) ||
+	    amdgpu_virt_access_debugfs_is_kiq(adev))
+		return 0;
+
+	if (amdgpu_virt_access_debugfs_is_mmio(adev))
+		adev->virt.caps &= ~AMDGPU_SRIOV_CAPS_RUNTIME;
+	else
+		return -EPERM;
+
+	return 0;
+}
+
+void amdgpu_virt_disable_access_debugfs(struct amdgpu_device *adev)
+{
+	if (amdgpu_sriov_vf(adev))
+		adev->virt.caps |= AMDGPU_SRIOV_CAPS_RUNTIME;
+}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
index f0128f745bd2..de27308802c9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
@@ -30,6 +30,11 @@
 #define AMDGPU_PASSTHROUGH_MODE        (1 << 3) /* thw whole GPU is pass through for VM */
 #define AMDGPU_SRIOV_CAPS_RUNTIME      (1 << 4) /* is out of full access mode */
 
+/* all asic after AI use this offset */
+#define mmRCC_IOV_FUNC_IDENTIFIER 0xDE5
+/* tonga/fiji use this offset */
+#define mmBIF_IOV_FUNC_IDENTIFIER 0x1503
+
 struct amdgpu_mm_table {
 	struct amdgpu_bo	*bo;
 	uint32_t		*cpu_addr;
@@ -54,6 +59,7 @@ struct amdgpu_vf_error_buffer {
 struct amdgpu_virt_ops {
 	int (*req_full_gpu)(struct amdgpu_device *adev, bool init);
 	int (*rel_full_gpu)(struct amdgpu_device *adev, bool init);
+	int (*req_init_data)(struct amdgpu_device *adev);
 	int (*reset_gpu)(struct amdgpu_device *adev);
 	int (*wait_reset)(struct amdgpu_device *adev);
 	void (*trans_msg)(struct amdgpu_device *adev, u32 req, u32 data1, u32 data2, u32 data3);
@@ -83,6 +89,8 @@ enum AMDGIM_FEATURE_FLAG {
 	AMDGIM_FEATURE_GIM_LOAD_UCODES   = 0x2,
 	/* VRAM LOST by GIM */
 	AMDGIM_FEATURE_GIM_FLR_VRAMLOST = 0x4,
+	/* MM bandwidth */
+	AMDGIM_FEATURE_GIM_MM_BW_MGR = 0x8,
 	/* PP ONE VF MODE in GIM */
 	AMDGIM_FEATURE_PP_ONE_VF = (1 << 4),
 };
@@ -256,6 +264,8 @@ struct amdgpu_virt {
 	struct amdgpu_virt_fw_reserve	fw_reserve;
 	uint32_t gim_feature;
 	uint32_t reg_access_mode;
+	int req_init_data_ver;
+	bool tdr_debug;
 };
 
 #define amdgpu_sriov_enabled(adev) \
@@ -287,6 +297,10 @@ static inline bool is_virtual_machine(void)
 
 #define amdgpu_sriov_is_pp_one_vf(adev) \
 	((adev)->virt.gim_feature & AMDGIM_FEATURE_PP_ONE_VF)
+#define amdgpu_sriov_is_debug(adev) \
+	((!adev->in_gpu_reset) && adev->virt.tdr_debug)
+#define amdgpu_sriov_is_normal(adev) \
+	((!adev->in_gpu_reset) && (!adev->virt.tdr_debug))
 
 bool amdgpu_virt_mmio_blocked(struct amdgpu_device *adev);
 void amdgpu_virt_init_setting(struct amdgpu_device *adev);
@@ -296,6 +310,7 @@ void amdgpu_virt_kiq_reg_write_reg_wait(struct amdgpu_device *adev,
 int amdgpu_virt_request_full_gpu(struct amdgpu_device *adev, bool init);
 int amdgpu_virt_release_full_gpu(struct amdgpu_device *adev, bool init);
 int amdgpu_virt_reset_gpu(struct amdgpu_device *adev);
+void amdgpu_virt_request_init_data(struct amdgpu_device *adev);
 int amdgpu_virt_wait_reset(struct amdgpu_device *adev);
 int amdgpu_virt_alloc_mm_table(struct amdgpu_device *adev);
 void amdgpu_virt_free_mm_table(struct amdgpu_device *adev);
@@ -303,4 +318,9 @@ int amdgpu_virt_fw_reserve_get_checksum(void *obj, unsigned long obj_size,
 					unsigned int key,
 					unsigned int chksum);
 void amdgpu_virt_init_data_exchange(struct amdgpu_device *adev);
+void amdgpu_detect_virtualization(struct amdgpu_device *adev);
+
+bool amdgpu_virt_can_access_debugfs(struct amdgpu_device *adev);
+int amdgpu_virt_enable_access_debugfs(struct amdgpu_device *adev);
+void amdgpu_virt_disable_access_debugfs(struct amdgpu_device *adev);
 #endif
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index 6d9252a27916..414a0b1c2e5a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -82,7 +82,7 @@ struct amdgpu_prt_cb {
 	struct dma_fence_cb cb;
 };
 
-/**
+/*
  * vm eviction_lock can be taken in MMU notifiers. Make sure no reclaim-FS
  * happens while holding this lock anywhere to prevent deadlocks when
  * an MMU notifier runs in reclaim-FS context.
@@ -726,7 +726,7 @@ bool amdgpu_vm_ready(struct amdgpu_vm *vm)
  * @adev: amdgpu_device pointer
  * @vm: VM to clear BO from
  * @bo: BO to clear
- * @direct: use a direct update
+ * @immediate: use an immediate update
  *
  * Root PD needs to be reserved when calling this.
  *
@@ -736,7 +736,7 @@ bool amdgpu_vm_ready(struct amdgpu_vm *vm)
 static int amdgpu_vm_clear_bo(struct amdgpu_device *adev,
 			      struct amdgpu_vm *vm,
 			      struct amdgpu_bo *bo,
-			      bool direct)
+			      bool immediate)
 {
 	struct ttm_operation_ctx ctx = { true, false };
 	unsigned level = adev->vm_manager.root_level;
@@ -795,7 +795,7 @@ static int amdgpu_vm_clear_bo(struct amdgpu_device *adev,
 	memset(&params, 0, sizeof(params));
 	params.adev = adev;
 	params.vm = vm;
-	params.direct = direct;
+	params.immediate = immediate;
 
 	r = vm->update_funcs->prepare(&params, NULL, AMDGPU_SYNC_EXPLICIT);
 	if (r)
@@ -850,11 +850,11 @@ static int amdgpu_vm_clear_bo(struct amdgpu_device *adev,
  * @adev: amdgpu_device pointer
  * @vm: requesting vm
  * @level: the page table level
- * @direct: use a direct update
+ * @immediate: use a immediate update
  * @bp: resulting BO allocation parameters
  */
 static void amdgpu_vm_bo_param(struct amdgpu_device *adev, struct amdgpu_vm *vm,
-			       int level, bool direct,
+			       int level, bool immediate,
 			       struct amdgpu_bo_param *bp)
 {
 	memset(bp, 0, sizeof(*bp));
@@ -870,7 +870,7 @@ static void amdgpu_vm_bo_param(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 	else if (!vm->root.base.bo || vm->root.base.bo->shadow)
 		bp->flags |= AMDGPU_GEM_CREATE_SHADOW;
 	bp->type = ttm_bo_type_kernel;
-	bp->no_wait_gpu = direct;
+	bp->no_wait_gpu = immediate;
 	if (vm->root.base.bo)
 		bp->resv = vm->root.base.bo->tbo.base.resv;
 }
@@ -881,7 +881,7 @@ static void amdgpu_vm_bo_param(struct amdgpu_device *adev, struct amdgpu_vm *vm,
  * @adev: amdgpu_device pointer
  * @vm: VM to allocate page tables for
  * @cursor: Which page table to allocate
- * @direct: use a direct update
+ * @immediate: use an immediate update
  *
  * Make sure a specific page table or directory is allocated.
  *
@@ -892,7 +892,7 @@ static void amdgpu_vm_bo_param(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 static int amdgpu_vm_alloc_pts(struct amdgpu_device *adev,
 			       struct amdgpu_vm *vm,
 			       struct amdgpu_vm_pt_cursor *cursor,
-			       bool direct)
+			       bool immediate)
 {
 	struct amdgpu_vm_pt *entry = cursor->entry;
 	struct amdgpu_bo_param bp;
@@ -913,7 +913,7 @@ static int amdgpu_vm_alloc_pts(struct amdgpu_device *adev,
 	if (entry->base.bo)
 		return 0;
 
-	amdgpu_vm_bo_param(adev, vm, cursor->level, direct, &bp);
+	amdgpu_vm_bo_param(adev, vm, cursor->level, immediate, &bp);
 
 	r = amdgpu_bo_create(adev, &bp, &pt);
 	if (r)
@@ -925,7 +925,7 @@ static int amdgpu_vm_alloc_pts(struct amdgpu_device *adev,
 	pt->parent = amdgpu_bo_ref(cursor->parent->base.bo);
 	amdgpu_vm_bo_base_init(&entry->base, vm, pt);
 
-	r = amdgpu_vm_clear_bo(adev, vm, pt, direct);
+	r = amdgpu_vm_clear_bo(adev, vm, pt, immediate);
 	if (r)
 		goto error_free_pt;
 
@@ -1276,7 +1276,7 @@ static void amdgpu_vm_invalidate_pds(struct amdgpu_device *adev,
  *
  * @adev: amdgpu_device pointer
  * @vm: requested vm
- * @direct: submit directly to the paging queue
+ * @immediate: submit immediately to the paging queue
  *
  * Makes sure all directories are up to date.
  *
@@ -1284,7 +1284,7 @@ static void amdgpu_vm_invalidate_pds(struct amdgpu_device *adev,
  * 0 for success, error for failure.
  */
 int amdgpu_vm_update_pdes(struct amdgpu_device *adev,
-			  struct amdgpu_vm *vm, bool direct)
+			  struct amdgpu_vm *vm, bool immediate)
 {
 	struct amdgpu_vm_update_params params;
 	int r;
@@ -1295,7 +1295,7 @@ int amdgpu_vm_update_pdes(struct amdgpu_device *adev,
 	memset(&params, 0, sizeof(params));
 	params.adev = adev;
 	params.vm = vm;
-	params.direct = direct;
+	params.immediate = immediate;
 
 	r = vm->update_funcs->prepare(&params, NULL, AMDGPU_SYNC_EXPLICIT);
 	if (r)
@@ -1446,20 +1446,24 @@ static int amdgpu_vm_update_ptes(struct amdgpu_vm_update_params *params,
 		uint64_t incr, entry_end, pe_start;
 		struct amdgpu_bo *pt;
 
-		if (flags & (AMDGPU_PTE_VALID | AMDGPU_PTE_PRT)) {
+		if (!params->unlocked) {
 			/* make sure that the page tables covering the
 			 * address range are actually allocated
 			 */
 			r = amdgpu_vm_alloc_pts(params->adev, params->vm,
-						&cursor, params->direct);
+						&cursor, params->immediate);
 			if (r)
 				return r;
 		}
 
 		shift = amdgpu_vm_level_shift(adev, cursor.level);
 		parent_shift = amdgpu_vm_level_shift(adev, cursor.level - 1);
-		if (adev->asic_type < CHIP_VEGA10 &&
-		    (flags & AMDGPU_PTE_VALID)) {
+		if (params->unlocked) {
+			/* Unlocked updates are only allowed on the leaves */
+			if (amdgpu_vm_pt_descendant(adev, &cursor))
+				continue;
+		} else if (adev->asic_type < CHIP_VEGA10 &&
+			   (flags & AMDGPU_PTE_VALID)) {
 			/* No huge page support before GMC v9 */
 			if (cursor.level != AMDGPU_VM_PTB) {
 				if (!amdgpu_vm_pt_descendant(adev, &cursor))
@@ -1557,7 +1561,8 @@ static int amdgpu_vm_update_ptes(struct amdgpu_vm_update_params *params,
  *
  * @adev: amdgpu_device pointer
  * @vm: requested vm
- * @direct: direct submission in a page fault
+ * @immediate: immediate submission in a page fault
+ * @unlocked: unlocked invalidation during MM callback
  * @resv: fences we need to sync to
  * @start: start of mapped range
  * @last: last mapped entry
@@ -1572,8 +1577,8 @@ static int amdgpu_vm_update_ptes(struct amdgpu_vm_update_params *params,
  * 0 for success, -EINVAL for failure.
  */
 static int amdgpu_vm_bo_update_mapping(struct amdgpu_device *adev,
-				       struct amdgpu_vm *vm, bool direct,
-				       struct dma_resv *resv,
+				       struct amdgpu_vm *vm, bool immediate,
+				       bool unlocked, struct dma_resv *resv,
 				       uint64_t start, uint64_t last,
 				       uint64_t flags, uint64_t addr,
 				       dma_addr_t *pages_addr,
@@ -1586,8 +1591,9 @@ static int amdgpu_vm_bo_update_mapping(struct amdgpu_device *adev,
 	memset(&params, 0, sizeof(params));
 	params.adev = adev;
 	params.vm = vm;
-	params.direct = direct;
+	params.immediate = immediate;
 	params.pages_addr = pages_addr;
+	params.unlocked = unlocked;
 
 	/* Implicitly sync to command submissions in the same VM before
 	 * unmapping. Sync to moving fences before mapping.
@@ -1603,11 +1609,12 @@ static int amdgpu_vm_bo_update_mapping(struct amdgpu_device *adev,
 		goto error_unlock;
 	}
 
-	if (flags & (AMDGPU_PTE_VALID | AMDGPU_PTE_PRT)) {
-		struct amdgpu_bo *root = vm->root.base.bo;
+	if (!unlocked && !dma_fence_is_signaled(vm->last_unlocked)) {
+		struct dma_fence *tmp = dma_fence_get_stub();
 
-		if (!dma_fence_is_signaled(vm->last_direct))
-			amdgpu_bo_fence(root, vm->last_direct, true);
+		amdgpu_bo_fence(vm->root.base.bo, vm->last_unlocked, true);
+		swap(vm->last_unlocked, tmp);
+		dma_fence_put(tmp);
 	}
 
 	r = vm->update_funcs->prepare(&params, resv, sync_mode);
@@ -1721,7 +1728,7 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev,
 		}
 
 		last = min((uint64_t)mapping->last, start + max_entries - 1);
-		r = amdgpu_vm_bo_update_mapping(adev, vm, false, resv,
+		r = amdgpu_vm_bo_update_mapping(adev, vm, false, false, resv,
 						start, last, flags, addr,
 						dma_addr, fence);
 		if (r)
@@ -1784,6 +1791,10 @@ int amdgpu_vm_bo_update(struct amdgpu_device *adev, struct amdgpu_bo_va *bo_va,
 
 	if (bo) {
 		flags = amdgpu_ttm_tt_pte_flags(adev, bo->tbo.ttm, mem);
+
+		if (amdgpu_bo_encrypted(bo))
+			flags |= AMDGPU_PTE_TMZ;
+
 		bo_adev = amdgpu_ttm_adev(bo->tbo.bdev);
 	} else {
 		flags = 0x0;
@@ -2014,7 +2025,7 @@ int amdgpu_vm_clear_freed(struct amdgpu_device *adev,
 		    mapping->start < AMDGPU_GMC_HOLE_START)
 			init_pte_value = AMDGPU_PTE_DEFAULT_ATC;
 
-		r = amdgpu_vm_bo_update_mapping(adev, vm, false, resv,
+		r = amdgpu_vm_bo_update_mapping(adev, vm, false, false, resv,
 						mapping->start, mapping->last,
 						init_pte_value, 0, NULL, &f);
 		amdgpu_vm_free_mapping(adev, vm, mapping, f);
@@ -2124,11 +2135,8 @@ struct amdgpu_bo_va *amdgpu_vm_bo_add(struct amdgpu_device *adev,
 	if (bo && amdgpu_xgmi_same_hive(adev, amdgpu_ttm_adev(bo->tbo.bdev)) &&
 	    (bo->preferred_domains & AMDGPU_GEM_DOMAIN_VRAM)) {
 		bo_va->is_xgmi = true;
-		mutex_lock(&adev->vm_manager.lock_pstate);
 		/* Power up XGMI if it can be potentially used */
-		if (++adev->vm_manager.xgmi_map_counter == 1)
-			amdgpu_xgmi_set_pstate(adev, 1);
-		mutex_unlock(&adev->vm_manager.lock_pstate);
+		amdgpu_xgmi_set_pstate(adev, AMDGPU_XGMI_PSTATE_MAX_VEGA20);
 	}
 
 	return bo_va;
@@ -2551,12 +2559,8 @@ void amdgpu_vm_bo_rmv(struct amdgpu_device *adev,
 
 	dma_fence_put(bo_va->last_pt_update);
 
-	if (bo && bo_va->is_xgmi) {
-		mutex_lock(&adev->vm_manager.lock_pstate);
-		if (--adev->vm_manager.xgmi_map_counter == 0)
-			amdgpu_xgmi_set_pstate(adev, 0);
-		mutex_unlock(&adev->vm_manager.lock_pstate);
-	}
+	if (bo && bo_va->is_xgmi)
+		amdgpu_xgmi_set_pstate(adev, AMDGPU_XGMI_PSTATE_MIN);
 
 	kfree(bo_va);
 }
@@ -2585,7 +2589,7 @@ bool amdgpu_vm_evictable(struct amdgpu_bo *bo)
 		return false;
 
 	/* Don't evict VM page tables while they are updated */
-	if (!dma_fence_is_signaled(bo_base->vm->last_direct)) {
+	if (!dma_fence_is_signaled(bo_base->vm->last_unlocked)) {
 		amdgpu_vm_eviction_unlock(bo_base->vm);
 		return false;
 	}
@@ -2762,7 +2766,7 @@ long amdgpu_vm_wait_idle(struct amdgpu_vm *vm, long timeout)
 	if (timeout <= 0)
 		return timeout;
 
-	return dma_fence_wait_timeout(vm->last_direct, true, timeout);
+	return dma_fence_wait_timeout(vm->last_unlocked, true, timeout);
 }
 
 /**
@@ -2798,7 +2802,7 @@ int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 
 
 	/* create scheduler entities for page table updates */
-	r = drm_sched_entity_init(&vm->direct, DRM_SCHED_PRIORITY_NORMAL,
+	r = drm_sched_entity_init(&vm->immediate, DRM_SCHED_PRIORITY_NORMAL,
 				  adev->vm_manager.vm_pte_scheds,
 				  adev->vm_manager.vm_pte_num_scheds, NULL);
 	if (r)
@@ -2808,7 +2812,7 @@ int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 				  adev->vm_manager.vm_pte_scheds,
 				  adev->vm_manager.vm_pte_num_scheds, NULL);
 	if (r)
-		goto error_free_direct;
+		goto error_free_immediate;
 
 	vm->pte_support_ats = false;
 	vm->is_compute_context = false;
@@ -2834,7 +2838,7 @@ int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 	else
 		vm->update_funcs = &amdgpu_vm_sdma_funcs;
 	vm->last_update = NULL;
-	vm->last_direct = dma_fence_get_stub();
+	vm->last_unlocked = dma_fence_get_stub();
 
 	mutex_init(&vm->eviction_lock);
 	vm->evicting = false;
@@ -2888,11 +2892,11 @@ int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 	vm->root.base.bo = NULL;
 
 error_free_delayed:
-	dma_fence_put(vm->last_direct);
+	dma_fence_put(vm->last_unlocked);
 	drm_sched_entity_destroy(&vm->delayed);
 
-error_free_direct:
-	drm_sched_entity_destroy(&vm->direct);
+error_free_immediate:
+	drm_sched_entity_destroy(&vm->immediate);
 
 	return r;
 }
@@ -3089,8 +3093,8 @@ void amdgpu_vm_fini(struct amdgpu_device *adev, struct amdgpu_vm *vm)
 		vm->pasid = 0;
 	}
 
-	dma_fence_wait(vm->last_direct, false);
-	dma_fence_put(vm->last_direct);
+	dma_fence_wait(vm->last_unlocked, false);
+	dma_fence_put(vm->last_unlocked);
 
 	list_for_each_entry_safe(mapping, tmp, &vm->freed, list) {
 		if (mapping->flags & AMDGPU_PTE_PRT && prt_fini_needed) {
@@ -3107,7 +3111,7 @@ void amdgpu_vm_fini(struct amdgpu_device *adev, struct amdgpu_vm *vm)
 	amdgpu_bo_unref(&root);
 	WARN_ON(vm->root.base.bo);
 
-	drm_sched_entity_destroy(&vm->direct);
+	drm_sched_entity_destroy(&vm->immediate);
 	drm_sched_entity_destroy(&vm->delayed);
 
 	if (!RB_EMPTY_ROOT(&vm->va.rb_root)) {
@@ -3166,9 +3170,6 @@ void amdgpu_vm_manager_init(struct amdgpu_device *adev)
 
 	idr_init(&adev->vm_manager.pasid_idr);
 	spin_lock_init(&adev->vm_manager.pasid_lock);
-
-	adev->vm_manager.xgmi_map_counter = 0;
-	mutex_init(&adev->vm_manager.lock_pstate);
 }
 
 /**
@@ -3343,8 +3344,8 @@ bool amdgpu_vm_handle_fault(struct amdgpu_device *adev, unsigned int pasid,
 		value = 0;
 	}
 
-	r = amdgpu_vm_bo_update_mapping(adev, vm, true, NULL, addr, addr + 1,
-					flags, value, NULL, NULL);
+	r = amdgpu_vm_bo_update_mapping(adev, vm, true, false, NULL, addr,
+					addr + 1, flags, value, NULL, NULL);
 	if (r)
 		goto error_unlock;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h
index 06fe30e1492d..c8e68d7890bf 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h
@@ -54,6 +54,9 @@ struct amdgpu_bo_list_entry;
 #define AMDGPU_PTE_SYSTEM	(1ULL << 1)
 #define AMDGPU_PTE_SNOOPED	(1ULL << 2)
 
+/* RV+ */
+#define AMDGPU_PTE_TMZ		(1ULL << 3)
+
 /* VI only */
 #define AMDGPU_PTE_EXECUTABLE	(1ULL << 4)
 
@@ -203,9 +206,14 @@ struct amdgpu_vm_update_params {
 	struct amdgpu_vm *vm;
 
 	/**
-	 * @direct: if changes should be made directly
+	 * @immediate: if changes should be made immediately
 	 */
-	bool direct;
+	bool immediate;
+
+	/**
+	 * @unlocked: true if the root BO is not locked
+	 */
+	bool unlocked;
 
 	/**
 	 * @pages_addr:
@@ -271,11 +279,11 @@ struct amdgpu_vm {
 	struct dma_fence	*last_update;
 
 	/* Scheduler entities for page table updates */
-	struct drm_sched_entity	direct;
+	struct drm_sched_entity	immediate;
 	struct drm_sched_entity	delayed;
 
-	/* Last submission to the scheduler entities */
-	struct dma_fence	*last_direct;
+	/* Last unlocked submission to the scheduler entities */
+	struct dma_fence	*last_unlocked;
 
 	unsigned int		pasid;
 	/* dedicated to vm */
@@ -349,10 +357,6 @@ struct amdgpu_vm_manager {
 	 */
 	struct idr				pasid_idr;
 	spinlock_t				pasid_lock;
-
-	/* counter of mapped memory through xgmi */
-	uint32_t				xgmi_map_counter;
-	struct mutex				lock_pstate;
 };
 
 #define amdgpu_vm_copy_pte(adev, ib, pe, src, count) ((adev)->vm_manager.vm_pte_funcs->copy_pte((ib), (pe), (src), (count)))
@@ -380,7 +384,7 @@ int amdgpu_vm_validate_pt_bos(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 			      void *param);
 int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_pipe_sync);
 int amdgpu_vm_update_pdes(struct amdgpu_device *adev,
-			  struct amdgpu_vm *vm, bool direct);
+			  struct amdgpu_vm *vm, bool immediate);
 int amdgpu_vm_clear_freed(struct amdgpu_device *adev,
 			  struct amdgpu_vm *vm,
 			  struct dma_fence **fence);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c
index e38516304070..39c704a1fb0e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c
@@ -84,7 +84,7 @@ static int amdgpu_vm_cpu_update(struct amdgpu_vm_update_params *p,
 
 	pe += (unsigned long)amdgpu_bo_kptr(bo);
 
-	trace_amdgpu_vm_set_ptes(pe, addr, count, incr, flags, p->direct);
+	trace_amdgpu_vm_set_ptes(pe, addr, count, incr, flags, p->immediate);
 
 	for (i = 0; i < count; i++) {
 		value = p->pages_addr ?
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c
index cf96c335b258..8d9c6feba660 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c
@@ -61,10 +61,12 @@ static int amdgpu_vm_sdma_prepare(struct amdgpu_vm_update_params *p,
 				  struct dma_resv *resv,
 				  enum amdgpu_sync_mode sync_mode)
 {
+	enum amdgpu_ib_pool_type pool = p->immediate ? AMDGPU_IB_POOL_IMMEDIATE
+		: AMDGPU_IB_POOL_DELAYED;
 	unsigned int ndw = AMDGPU_VM_SDMA_MIN_NUM_DW;
 	int r;
 
-	r = amdgpu_job_alloc_with_ib(p->adev, ndw * 4, &p->job);
+	r = amdgpu_job_alloc_with_ib(p->adev, ndw * 4, pool, &p->job);
 	if (r)
 		return r;
 
@@ -90,11 +92,11 @@ static int amdgpu_vm_sdma_commit(struct amdgpu_vm_update_params *p,
 {
 	struct amdgpu_ib *ib = p->job->ibs;
 	struct drm_sched_entity *entity;
-	struct dma_fence *f, *tmp;
 	struct amdgpu_ring *ring;
+	struct dma_fence *f;
 	int r;
 
-	entity = p->direct ? &p->vm->direct : &p->vm->delayed;
+	entity = p->immediate ? &p->vm->immediate : &p->vm->delayed;
 	ring = container_of(entity->rq->sched, struct amdgpu_ring, sched);
 
 	WARN_ON(ib->length_dw == 0);
@@ -104,15 +106,16 @@ static int amdgpu_vm_sdma_commit(struct amdgpu_vm_update_params *p,
 	if (r)
 		goto error;
 
-	if (p->direct) {
-		tmp = dma_fence_get(f);
-		swap(p->vm->last_direct, tmp);
+	if (p->unlocked) {
+		struct dma_fence *tmp = dma_fence_get(f);
+
+		swap(p->vm->last_unlocked, f);
 		dma_fence_put(tmp);
 	} else {
-		dma_resv_add_shared_fence(p->vm->root.base.bo->tbo.base.resv, f);
+		amdgpu_bo_fence(p->vm->root.base.bo, f, true);
 	}
 
-	if (fence && !p->direct)
+	if (fence && !p->immediate)
 		swap(*fence, f);
 	dma_fence_put(f);
 	return 0;
@@ -142,7 +145,7 @@ static void amdgpu_vm_sdma_copy_ptes(struct amdgpu_vm_update_params *p,
 	src += p->num_dw_left * 4;
 
 	pe += amdgpu_gmc_sign_extend(bo->tbo.offset);
-	trace_amdgpu_vm_copy_ptes(pe, src, count, p->direct);
+	trace_amdgpu_vm_copy_ptes(pe, src, count, p->immediate);
 
 	amdgpu_vm_copy_pte(p->adev, ib, pe, src, count);
 }
@@ -169,7 +172,7 @@ static void amdgpu_vm_sdma_set_ptes(struct amdgpu_vm_update_params *p,
 	struct amdgpu_ib *ib = p->job->ibs;
 
 	pe += amdgpu_gmc_sign_extend(bo->tbo.offset);
-	trace_amdgpu_vm_set_ptes(pe, addr, count, incr, flags, p->direct);
+	trace_amdgpu_vm_set_ptes(pe, addr, count, incr, flags, p->immediate);
 	if (count < 3) {
 		amdgpu_vm_write_pte(p->adev, ib, pe, addr | flags,
 				    count, incr);
@@ -198,6 +201,8 @@ static int amdgpu_vm_sdma_update(struct amdgpu_vm_update_params *p,
 				 uint64_t addr, unsigned count, uint32_t incr,
 				 uint64_t flags)
 {
+	enum amdgpu_ib_pool_type pool = p->immediate ? AMDGPU_IB_POOL_IMMEDIATE
+		: AMDGPU_IB_POOL_DELAYED;
 	unsigned int i, ndw, nptes;
 	uint64_t *pte;
 	int r;
@@ -223,7 +228,8 @@ static int amdgpu_vm_sdma_update(struct amdgpu_vm_update_params *p,
 			ndw = max(ndw, AMDGPU_VM_SDMA_MIN_NUM_DW);
 			ndw = min(ndw, AMDGPU_VM_SDMA_MAX_NUM_DW);
 
-			r = amdgpu_job_alloc_with_ib(p->adev, ndw * 4, &p->job);
+			r = amdgpu_job_alloc_with_ib(p->adev, ndw * 4, pool,
+						     &p->job);
 			if (r)
 				return r;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
index 82a3299e53c0..128a667ed8fa 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
@@ -22,6 +22,7 @@
  * Authors: Christian König
  */
 
+#include <linux/dma-mapping.h>
 #include "amdgpu.h"
 #include "amdgpu_vm.h"
 #include "amdgpu_atomfirmware.h"
@@ -458,6 +459,104 @@ static void amdgpu_vram_mgr_del(struct ttm_mem_type_manager *man,
 	mem->mm_node = NULL;
 }
 
+/**
+ * amdgpu_vram_mgr_alloc_sgt - allocate and fill a sg table
+ *
+ * @adev: amdgpu device pointer
+ * @mem: TTM memory object
+ * @dev: the other device
+ * @dir: dma direction
+ * @sgt: resulting sg table
+ *
+ * Allocate and fill a sg table from a VRAM allocation.
+ */
+int amdgpu_vram_mgr_alloc_sgt(struct amdgpu_device *adev,
+			      struct ttm_mem_reg *mem,
+			      struct device *dev,
+			      enum dma_data_direction dir,
+			      struct sg_table **sgt)
+{
+	struct drm_mm_node *node;
+	struct scatterlist *sg;
+	int num_entries = 0;
+	unsigned int pages;
+	int i, r;
+
+	*sgt = kmalloc(sizeof(*sg), GFP_KERNEL);
+	if (!*sgt)
+		return -ENOMEM;
+
+	for (pages = mem->num_pages, node = mem->mm_node;
+	     pages; pages -= node->size, ++node)
+		++num_entries;
+
+	r = sg_alloc_table(*sgt, num_entries, GFP_KERNEL);
+	if (r)
+		goto error_free;
+
+	for_each_sg((*sgt)->sgl, sg, num_entries, i)
+		sg->length = 0;
+
+	node = mem->mm_node;
+	for_each_sg((*sgt)->sgl, sg, num_entries, i) {
+		phys_addr_t phys = (node->start << PAGE_SHIFT) +
+			adev->gmc.aper_base;
+		size_t size = node->size << PAGE_SHIFT;
+		dma_addr_t addr;
+
+		++node;
+		addr = dma_map_resource(dev, phys, size, dir,
+					DMA_ATTR_SKIP_CPU_SYNC);
+		r = dma_mapping_error(dev, addr);
+		if (r)
+			goto error_unmap;
+
+		sg_set_page(sg, NULL, size, 0);
+		sg_dma_address(sg) = addr;
+		sg_dma_len(sg) = size;
+	}
+	return 0;
+
+error_unmap:
+	for_each_sg((*sgt)->sgl, sg, num_entries, i) {
+		if (!sg->length)
+			continue;
+
+		dma_unmap_resource(dev, sg->dma_address,
+				   sg->length, dir,
+				   DMA_ATTR_SKIP_CPU_SYNC);
+	}
+	sg_free_table(*sgt);
+
+error_free:
+	kfree(*sgt);
+	return r;
+}
+
+/**
+ * amdgpu_vram_mgr_alloc_sgt - allocate and fill a sg table
+ *
+ * @adev: amdgpu device pointer
+ * @sgt: sg table to free
+ *
+ * Free a previously allocate sg table.
+ */
+void amdgpu_vram_mgr_free_sgt(struct amdgpu_device *adev,
+			      struct device *dev,
+			      enum dma_data_direction dir,
+			      struct sg_table *sgt)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i)
+		dma_unmap_resource(dev, sg->dma_address,
+				   sg->length, dir,
+				   DMA_ATTR_SKIP_CPU_SYNC);
+	sg_free_table(sgt);
+	kfree(sgt);
+}
+
 /**
  * amdgpu_vram_mgr_usage - how many bytes are used in this domain
  *
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
index 95b3327168ac..48c0ce13f68e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
@@ -373,7 +373,13 @@ struct amdgpu_hive_info *amdgpu_get_xgmi_hive(struct amdgpu_device *adev, int lo
 
 	if (lock)
 		mutex_lock(&tmp->hive_lock);
-	tmp->pstate = -1;
+	tmp->pstate = AMDGPU_XGMI_PSTATE_UNKNOWN;
+	tmp->hi_req_gpu = NULL;
+	/*
+	 * hive pstate on boot is high in vega20 so we have to go to low
+	 * pstate on after boot.
+	 */
+	tmp->hi_req_count = AMDGPU_MAX_XGMI_DEVICE_PER_HIVE;
 	mutex_unlock(&xgmi_mutex);
 
 	return tmp;
@@ -383,50 +389,53 @@ int amdgpu_xgmi_set_pstate(struct amdgpu_device *adev, int pstate)
 {
 	int ret = 0;
 	struct amdgpu_hive_info *hive = amdgpu_get_xgmi_hive(adev, 0);
-	struct amdgpu_device *tmp_adev;
-	bool update_hive_pstate = true;
-	bool is_high_pstate = pstate && adev->asic_type == CHIP_VEGA20;
+	struct amdgpu_device *request_adev = hive->hi_req_gpu ?
+						hive->hi_req_gpu : adev;
+	bool is_hi_req = pstate == AMDGPU_XGMI_PSTATE_MAX_VEGA20;
+	bool init_low = hive->pstate == AMDGPU_XGMI_PSTATE_UNKNOWN;
 
-	if (!hive)
+	/* fw bug so temporarily disable pstate switching */
+	return 0;
+
+	if (!hive || adev->asic_type != CHIP_VEGA20)
 		return 0;
 
 	mutex_lock(&hive->hive_lock);
 
-	if (hive->pstate == pstate) {
-		adev->pstate = is_high_pstate ? pstate : adev->pstate;
+	if (is_hi_req)
+		hive->hi_req_count++;
+	else
+		hive->hi_req_count--;
+
+	/*
+	 * Vega20 only needs single peer to request pstate high for the hive to
+	 * go high but all peers must request pstate low for the hive to go low
+	 */
+	if (hive->pstate == pstate ||
+			(!is_hi_req && hive->hi_req_count && !init_low))
 		goto out;
-	}
 
-	dev_dbg(adev->dev, "Set xgmi pstate %d.\n", pstate);
+	dev_dbg(request_adev->dev, "Set xgmi pstate %d.\n", pstate);
 
-	ret = amdgpu_dpm_set_xgmi_pstate(adev, pstate);
+	ret = amdgpu_dpm_set_xgmi_pstate(request_adev, pstate);
 	if (ret) {
-		dev_err(adev->dev,
+		dev_err(request_adev->dev,
 			"XGMI: Set pstate failure on device %llx, hive %llx, ret %d",
-			adev->gmc.xgmi.node_id,
-			adev->gmc.xgmi.hive_id, ret);
+			request_adev->gmc.xgmi.node_id,
+			request_adev->gmc.xgmi.hive_id, ret);
 		goto out;
 	}
 
-	/* Update device pstate */
-	adev->pstate = pstate;
-
-	/*
-	 * Update the hive pstate only all devices of the hive
-	 * are in the same pstate
-	 */
-	list_for_each_entry(tmp_adev, &hive->device_list, gmc.xgmi.head) {
-		if (tmp_adev->pstate != adev->pstate) {
-			update_hive_pstate = false;
-			break;
-		}
-	}
-	if (update_hive_pstate || is_high_pstate)
+	if (init_low)
+		hive->pstate = hive->hi_req_count ?
+					hive->pstate : AMDGPU_XGMI_PSTATE_MIN;
+	else {
 		hive->pstate = pstate;
-
+		hive->hi_req_gpu = pstate != AMDGPU_XGMI_PSTATE_MIN ?
+							adev : NULL;
+	}
 out:
 	mutex_unlock(&hive->hive_lock);
-
 	return ret;
 }
 
@@ -507,9 +516,6 @@ int amdgpu_xgmi_add_device(struct amdgpu_device *adev)
 		goto exit;
 	}
 
-	/* Set default device pstate */
-	adev->pstate = -1;
-
 	top_info = &adev->psp.xgmi_context.top_info;
 
 	list_add_tail(&adev->gmc.xgmi.head, &hive->device_list);
@@ -604,6 +610,8 @@ int amdgpu_xgmi_ras_late_init(struct amdgpu_device *adev)
 	    adev->gmc.xgmi.num_physical_nodes == 0)
 		return 0;
 
+	amdgpu_xgmi_reset_ras_error_count(adev);
+
 	if (!adev->gmc.xgmi.ras_if) {
 		adev->gmc.xgmi.ras_if = kmalloc(sizeof(struct ras_common_if), GFP_KERNEL);
 		if (!adev->gmc.xgmi.ras_if)
@@ -668,6 +676,32 @@ uint64_t amdgpu_xgmi_get_relative_phy_addr(struct amdgpu_device *adev,
 	return addr + dram_base_addr;
 }
 
+static void pcs_clear_status(struct amdgpu_device *adev, uint32_t pcs_status_reg)
+{
+	WREG32_PCIE(pcs_status_reg, 0xFFFFFFFF);
+	WREG32_PCIE(pcs_status_reg, 0);
+}
+
+void amdgpu_xgmi_reset_ras_error_count(struct amdgpu_device *adev)
+{
+	uint32_t i;
+
+	switch (adev->asic_type) {
+	case CHIP_ARCTURUS:
+		for (i = 0; i < ARRAY_SIZE(xgmi_pcs_err_status_reg_arct); i++)
+			pcs_clear_status(adev,
+					 xgmi_pcs_err_status_reg_arct[i]);
+		break;
+	case CHIP_VEGA20:
+		for (i = 0; i < ARRAY_SIZE(xgmi_pcs_err_status_reg_vg20); i++)
+			pcs_clear_status(adev,
+					 xgmi_pcs_err_status_reg_vg20[i]);
+		break;
+	default:
+		break;
+	}
+}
+
 static int amdgpu_xgmi_query_pcs_error_status(struct amdgpu_device *adev,
 					      uint32_t value,
 					      uint32_t *ue_count,
@@ -758,6 +792,8 @@ int amdgpu_xgmi_query_ras_error_count(struct amdgpu_device *adev,
 		break;
 	}
 
+	amdgpu_xgmi_reset_ras_error_count(adev);
+
 	err_data->ue_count += ue_cnt;
 	err_data->ce_count += ce_cnt;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.h
index 4a92067fe595..6999eab16a72 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.h
@@ -25,6 +25,7 @@
 #include <drm/task_barrier.h>
 #include "amdgpu_psp.h"
 
+
 struct amdgpu_hive_info {
 	uint64_t		hive_id;
 	struct list_head	device_list;
@@ -33,8 +34,14 @@ struct amdgpu_hive_info {
 	struct kobject *kobj;
 	struct device_attribute dev_attr;
 	struct amdgpu_device *adev;
-	int pstate; /*0 -- low , 1 -- high , -1 unknown*/
+	int hi_req_count;
+	struct amdgpu_device *hi_req_gpu;
 	struct task_barrier tb;
+	enum {
+		AMDGPU_XGMI_PSTATE_MIN,
+		AMDGPU_XGMI_PSTATE_MAX_VEGA20,
+		AMDGPU_XGMI_PSTATE_UNKNOWN
+	} pstate;
 };
 
 struct amdgpu_pcs_ras_field {
@@ -56,6 +63,7 @@ uint64_t amdgpu_xgmi_get_relative_phy_addr(struct amdgpu_device *adev,
 					   uint64_t addr);
 int amdgpu_xgmi_query_ras_error_count(struct amdgpu_device *adev,
 				      void *ras_error_status);
+void amdgpu_xgmi_reset_ras_error_count(struct amdgpu_device *adev);
 
 static inline bool amdgpu_xgmi_same_hive(struct amdgpu_device *adev,
 		struct amdgpu_device *bo_adev)
diff --git a/drivers/gpu/drm/amd/amdgpu/atom.c b/drivers/gpu/drm/amd/amdgpu/atom.c
index cae426c7c086..4cfc786699c7 100644
--- a/drivers/gpu/drm/amd/amdgpu/atom.c
+++ b/drivers/gpu/drm/amd/amdgpu/atom.c
@@ -54,6 +54,8 @@
 #define PLL_INDEX	2
 #define PLL_DATA	3
 
+#define ATOM_CMD_TIMEOUT_SEC	20
+
 typedef struct {
 	struct atom_context *ctx;
 	uint32_t *ps, *ws;
@@ -744,8 +746,9 @@ static void atom_op_jump(atom_exec_context *ctx, int *ptr, int arg)
 			cjiffies = jiffies;
 			if (time_after(cjiffies, ctx->last_jump_jiffies)) {
 				cjiffies -= ctx->last_jump_jiffies;
-				if ((jiffies_to_msecs(cjiffies) > 10000)) {
-					DRM_ERROR("atombios stuck in loop for more than 10secs aborting\n");
+				if ((jiffies_to_msecs(cjiffies) > ATOM_CMD_TIMEOUT_SEC*1000)) {
+					DRM_ERROR("atombios stuck in loop for more than %dsecs aborting\n",
+						  ATOM_CMD_TIMEOUT_SEC);
 					ctx->abort = true;
 				}
 			} else {
diff --git a/drivers/gpu/drm/amd/amdgpu/cik.c b/drivers/gpu/drm/amd/amdgpu/cik.c
index 62635e58e45e..fe306d0f73f7 100644
--- a/drivers/gpu/drm/amd/amdgpu/cik.c
+++ b/drivers/gpu/drm/amd/amdgpu/cik.c
@@ -1809,12 +1809,6 @@ static uint32_t cik_get_rev_id(struct amdgpu_device *adev)
 		>> CC_DRM_ID_STRAPS__ATI_REV_ID__SHIFT;
 }
 
-static void cik_detect_hw_virtualization(struct amdgpu_device *adev)
-{
-	if (is_virtual_machine()) /* passthrough mode */
-		adev->virt.caps |= AMDGPU_PASSTHROUGH_MODE;
-}
-
 static void cik_flush_hdp(struct amdgpu_device *adev, struct amdgpu_ring *ring)
 {
 	if (!ring || !ring->funcs->emit_wreg) {
@@ -2177,8 +2171,6 @@ static const struct amdgpu_ip_block_version cik_common_ip_block =
 
 int cik_set_ip_blocks(struct amdgpu_device *adev)
 {
-	cik_detect_hw_virtualization(adev);
-
 	switch (adev->asic_type) {
 	case CHIP_BONAIRE:
 		amdgpu_device_ip_block_add(adev, &cik_common_ip_block);
diff --git a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c
index 580d3f93d670..20f108818b2b 100644
--- a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c
+++ b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c
@@ -320,8 +320,6 @@ static void cik_sdma_gfx_stop(struct amdgpu_device *adev)
 		WREG32(mmSDMA0_GFX_RB_CNTL + sdma_offsets[i], rb_cntl);
 		WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], 0);
 	}
-	sdma0->sched.ready = false;
-	sdma1->sched.ready = false;
 }
 
 /**
@@ -679,7 +677,8 @@ static int cik_sdma_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	tmp = 0xCAFEDEAD;
 	adev->wb.wb[index] = cpu_to_le32(tmp);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 256, &ib);
+	r = amdgpu_ib_get(adev, NULL, 256,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err0;
 
@@ -980,7 +979,8 @@ static int cik_sdma_sw_init(void *handle)
 				     &adev->sdma.trap_irq,
 				     (i == 0) ?
 				     AMDGPU_SDMA_IRQ_INSTANCE0 :
-				     AMDGPU_SDMA_IRQ_INSTANCE1);
+				     AMDGPU_SDMA_IRQ_INSTANCE1,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -1313,7 +1313,8 @@ static void cik_sdma_set_irq_funcs(struct amdgpu_device *adev)
 static void cik_sdma_emit_copy_buffer(struct amdgpu_ib *ib,
 				      uint64_t src_offset,
 				      uint64_t dst_offset,
-				      uint32_t byte_count)
+				      uint32_t byte_count,
+				      bool tmz)
 {
 	ib->ptr[ib->length_dw++] = SDMA_PACKET(SDMA_OPCODE_COPY, SDMA_COPY_SUB_OPCODE_LINEAR, 0);
 	ib->ptr[ib->length_dw++] = byte_count;
diff --git a/drivers/gpu/drm/amd/amdgpu/cikd.h b/drivers/gpu/drm/amd/amdgpu/cikd.h
index cee6e8a3ad9c..5f3f6ebfb387 100644
--- a/drivers/gpu/drm/amd/amdgpu/cikd.h
+++ b/drivers/gpu/drm/amd/amdgpu/cikd.h
@@ -450,7 +450,7 @@
 #              define PACKET3_DMA_DATA_CMD_SAIC    (1 << 28)
 #              define PACKET3_DMA_DATA_CMD_DAIC    (1 << 29)
 #              define PACKET3_DMA_DATA_CMD_RAW_WAIT  (1 << 30)
-#define	PACKET3_AQUIRE_MEM				0x58
+#define	PACKET3_ACQUIRE_MEM				0x58
 #define	PACKET3_REWIND					0x59
 #define	PACKET3_LOAD_UCONFIG_REG			0x5E
 #define	PACKET3_LOAD_SH_REG				0x5F
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
index 2512e7ebfedf..e38744d06f4e 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
@@ -2303,9 +2303,9 @@ static void dce_v10_0_hide_cursor(struct drm_crtc *crtc)
 	struct amdgpu_device *adev = crtc->dev->dev_private;
 	u32 tmp;
 
-	tmp = RREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset);
+	tmp = RREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset);
 	tmp = REG_SET_FIELD(tmp, CUR_CONTROL, CURSOR_EN, 0);
-	WREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset, tmp);
+	WREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset, tmp);
 }
 
 static void dce_v10_0_show_cursor(struct drm_crtc *crtc)
@@ -2319,10 +2319,10 @@ static void dce_v10_0_show_cursor(struct drm_crtc *crtc)
 	WREG32(mmCUR_SURFACE_ADDRESS + amdgpu_crtc->crtc_offset,
 	       lower_32_bits(amdgpu_crtc->cursor_addr));
 
-	tmp = RREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset);
+	tmp = RREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset);
 	tmp = REG_SET_FIELD(tmp, CUR_CONTROL, CURSOR_EN, 1);
 	tmp = REG_SET_FIELD(tmp, CUR_CONTROL, CURSOR_MODE, 2);
-	WREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset, tmp);
+	WREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset, tmp);
 }
 
 static int dce_v10_0_cursor_move_locked(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
index 0dde22db9848..2584ff74423b 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
@@ -2382,9 +2382,9 @@ static void dce_v11_0_hide_cursor(struct drm_crtc *crtc)
 	struct amdgpu_device *adev = crtc->dev->dev_private;
 	u32 tmp;
 
-	tmp = RREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset);
+	tmp = RREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset);
 	tmp = REG_SET_FIELD(tmp, CUR_CONTROL, CURSOR_EN, 0);
-	WREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset, tmp);
+	WREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset, tmp);
 }
 
 static void dce_v11_0_show_cursor(struct drm_crtc *crtc)
@@ -2398,10 +2398,10 @@ static void dce_v11_0_show_cursor(struct drm_crtc *crtc)
 	WREG32(mmCUR_SURFACE_ADDRESS + amdgpu_crtc->crtc_offset,
 	       lower_32_bits(amdgpu_crtc->cursor_addr));
 
-	tmp = RREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset);
+	tmp = RREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset);
 	tmp = REG_SET_FIELD(tmp, CUR_CONTROL, CURSOR_EN, 1);
 	tmp = REG_SET_FIELD(tmp, CUR_CONTROL, CURSOR_MODE, 2);
-	WREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset, tmp);
+	WREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset, tmp);
 }
 
 static int dce_v11_0_cursor_move_locked(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c
index 84219534bd38..d05c39f9ae40 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c
@@ -2194,9 +2194,9 @@ static void dce_v6_0_hide_cursor(struct drm_crtc *crtc)
 	struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc);
 	struct amdgpu_device *adev = crtc->dev->dev_private;
 
-	WREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset,
-		   (CURSOR_24_8_PRE_MULT << CUR_CONTROL__CURSOR_MODE__SHIFT) |
-		   (CURSOR_URGENT_1_2 << CUR_CONTROL__CURSOR_URGENT_CONTROL__SHIFT));
+	WREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset,
+	       (CURSOR_24_8_PRE_MULT << CUR_CONTROL__CURSOR_MODE__SHIFT) |
+	       (CURSOR_URGENT_1_2 << CUR_CONTROL__CURSOR_URGENT_CONTROL__SHIFT));
 
 
 }
@@ -2211,10 +2211,10 @@ static void dce_v6_0_show_cursor(struct drm_crtc *crtc)
 	WREG32(mmCUR_SURFACE_ADDRESS + amdgpu_crtc->crtc_offset,
 	       lower_32_bits(amdgpu_crtc->cursor_addr));
 
-	WREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset,
-		   CUR_CONTROL__CURSOR_EN_MASK |
-		   (CURSOR_24_8_PRE_MULT << CUR_CONTROL__CURSOR_MODE__SHIFT) |
-		   (CURSOR_URGENT_1_2 << CUR_CONTROL__CURSOR_URGENT_CONTROL__SHIFT));
+	WREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset,
+	       CUR_CONTROL__CURSOR_EN_MASK |
+	       (CURSOR_24_8_PRE_MULT << CUR_CONTROL__CURSOR_MODE__SHIFT) |
+	       (CURSOR_URGENT_1_2 << CUR_CONTROL__CURSOR_URGENT_CONTROL__SHIFT));
 
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c
index 3a640702d7d1..ad0f8adb6a2b 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c
@@ -2205,9 +2205,9 @@ static void dce_v8_0_hide_cursor(struct drm_crtc *crtc)
 	struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc);
 	struct amdgpu_device *adev = crtc->dev->dev_private;
 
-	WREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset,
-		   (CURSOR_24_8_PRE_MULT << CUR_CONTROL__CURSOR_MODE__SHIFT) |
-		   (CURSOR_URGENT_1_2 << CUR_CONTROL__CURSOR_URGENT_CONTROL__SHIFT));
+	WREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset,
+	       (CURSOR_24_8_PRE_MULT << CUR_CONTROL__CURSOR_MODE__SHIFT) |
+	       (CURSOR_URGENT_1_2 << CUR_CONTROL__CURSOR_URGENT_CONTROL__SHIFT));
 }
 
 static void dce_v8_0_show_cursor(struct drm_crtc *crtc)
@@ -2220,10 +2220,10 @@ static void dce_v8_0_show_cursor(struct drm_crtc *crtc)
 	WREG32(mmCUR_SURFACE_ADDRESS + amdgpu_crtc->crtc_offset,
 	       lower_32_bits(amdgpu_crtc->cursor_addr));
 
-	WREG32_IDX(mmCUR_CONTROL + amdgpu_crtc->crtc_offset,
-		   CUR_CONTROL__CURSOR_EN_MASK |
-		   (CURSOR_24_8_PRE_MULT << CUR_CONTROL__CURSOR_MODE__SHIFT) |
-		   (CURSOR_URGENT_1_2 << CUR_CONTROL__CURSOR_URGENT_CONTROL__SHIFT));
+	WREG32(mmCUR_CONTROL + amdgpu_crtc->crtc_offset,
+	       CUR_CONTROL__CURSOR_EN_MASK |
+	       (CURSOR_24_8_PRE_MULT << CUR_CONTROL__CURSOR_MODE__SHIFT) |
+	       (CURSOR_URGENT_1_2 << CUR_CONTROL__CURSOR_URGENT_CONTROL__SHIFT));
 }
 
 static int dce_v8_0_cursor_move_locked(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c
index 13e12be667fc..d5ff7b6331ff 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c
@@ -172,8 +172,9 @@ static void dce_virtual_crtc_disable(struct drm_crtc *crtc)
 {
 	struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc);
 
-	dce_virtual_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+	drm_crtc_vblank_off(crtc);
 
+	amdgpu_crtc->enabled = false;
 	amdgpu_crtc->pll_id = ATOM_PPLL_INVALID;
 	amdgpu_crtc->encoder = NULL;
 	amdgpu_crtc->connector = NULL;
@@ -286,7 +287,7 @@ static int dce_virtual_get_modes(struct drm_connector *connector)
 	static const struct mode_size {
 		int w;
 		int h;
-	} common_modes[17] = {
+	} common_modes[21] = {
 		{ 640,  480},
 		{ 720,  480},
 		{ 800,  600},
@@ -303,10 +304,14 @@ static int dce_virtual_get_modes(struct drm_connector *connector)
 		{1680, 1050},
 		{1600, 1200},
 		{1920, 1080},
-		{1920, 1200}
+		{1920, 1200},
+		{4096, 3112},
+		{3656, 2664},
+		{3840, 2160},
+		{4096, 2160},
 	};
 
-	for (i = 0; i < 17; i++) {
+	for (i = 0; i < 21; i++) {
 		mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false, false);
 		drm_mode_probed_add(connector, mode);
 	}
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index f92c158d89a1..63ac4308b9c4 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -138,6 +138,1062 @@ static const struct soc15_reg_golden golden_settings_gc_10_0_nv10[] =
 	/* Pending on emulation bring up */
 };
 
+static const struct soc15_reg_golden golden_settings_gc_rlc_spm_10_0_nv10[] =
+{
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xe0000000, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x28),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xcc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x88),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xbc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x90),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x94),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x98),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x9c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xac),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x38),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x3c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x40),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x44),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x48),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x70),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x74),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x78),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x7c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x80),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x84),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x50),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x54),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x58),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x5c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x60),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x64),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x68),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x6c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x28),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x28),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x2c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x2c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x30),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x30),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x34),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x34),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x38),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x38),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x3c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x3c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x50),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x50),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x54),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x54),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x58),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x58),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x5c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x5c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1d),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1d),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x48),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x48),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x40),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x40),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x44),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x44),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x17),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x17),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x60),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x60),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x64),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x64),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x70),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x70),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x74),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x74),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x68),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x68),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x6c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x6c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x78),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x78),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x7c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x7c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x88),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x88),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x80),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x80),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x84),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x84),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x90),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x90),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x94),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x94),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x98),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x98),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x9c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x9c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xac),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xac),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xbc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xbc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xcc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xcc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xec),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xec),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xfc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xfc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x100),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x100),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x104),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x104),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x118),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x118),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x11c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x11c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x120),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x120),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x124),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x124),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xdc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xdc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x110),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x110),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x114),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x114),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x108),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x108),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x17),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x17),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x128),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x128),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x12c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x12c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x138),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x138),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x13c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x13c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x130),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x130),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x134),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x134),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x140),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x140),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x144),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x144),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x150),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x150),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x154),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x154),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x148),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x148),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x158),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x158),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x15c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x15c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x168),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x168),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x16c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x16c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x160),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x160),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x164),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x164),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x170),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x170),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x174),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x174),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x180),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x180),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x184),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x184),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x178),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x178),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x17c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x17c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x188),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x188),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x198),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x198),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x19c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x19c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x190),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x190),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x194),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x194),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x30),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x34),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1d),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1d),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1f),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1f),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x2c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLOBALS_SAMPLE_SKEW, 0x000000FF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLOBALS_MUXSEL_SKEW, 0x000000FF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLE_SKEW, 0x000000FF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLE_SKEW, 0x000000FF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_MUXSEL_SKEW, 0x000000FF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_MUXSEL_SKEW, 0x000000FF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_DESER_START_SKEW, 0x000000FF, 0x33),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xFFFFFFFF, 0xe0000000)
+};
+
 static const struct soc15_reg_golden golden_settings_gc_10_1_1[] =
 {
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmCB_HW_CONTROL_4, 0xffffffff, 0x003c0014),
@@ -272,11 +1328,1691 @@ static const struct soc15_reg_golden golden_settings_gc_10_1_nv14[] =
 	/* Pending on emulation bring up */
 };
 
+static const struct soc15_reg_golden golden_settings_gc_rlc_spm_10_1_nv14[] =
+{
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xE0000000L, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x28),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x80),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x84),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x88),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x60),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x64),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x68),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x6c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x70),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x74),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x78),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x7c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x38),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x3c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x40),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x44),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x48),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x50),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x54),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x58),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x5c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x28),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x2c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x30),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x34),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x38),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x3c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x50),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1e),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x54),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1e),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x58),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1e),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x5c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1e),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x48),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x40),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1e),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x44),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1e),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x60),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x64),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x70),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x74),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x68),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x6c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x78),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x7c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x88),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x80),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x84),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x90),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x94),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x98),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x9c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xac),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xbc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xcc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xdc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xec),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x100),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x104),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x108),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x110),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x114),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x118),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x11c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x17),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x130),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x134),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x138),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x13c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x128),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x12c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x120),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x124),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x140),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x144),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x150),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x154),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x148),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x158),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x15c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x168),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x16c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x160),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x164),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x170),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x174),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x180),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x184),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x178),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x17c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x188),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x198),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x19c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x190),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x194),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1a0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1a4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1b0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1b4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1a8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1ac),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1b8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1bc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1c8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1cc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1c0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1c4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x30),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x34),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x2c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLOBALS_SAMPLE_SKEW, 0x000000FF, 0x26),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLOBALS_MUXSEL_SKEW, 0x000000FF, 0x28),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLE_SKEW, 0x000000FF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLE_SKEW, 0x000000FF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_MUXSEL_SKEW, 0x000000FF, 0x1f),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_MUXSEL_SKEW, 0x000000FF, 0x25),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_DESER_START_SKEW, 0x000000FF, 0x3b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xFFFFFFFF, 0xe0000000)
+};
+
 static const struct soc15_reg_golden golden_settings_gc_10_1_2_nv12[] =
 {
 	/* Pending on emulation bring up */
 };
 
+static const struct soc15_reg_golden golden_settings_gc_rlc_spm_10_1_2_nv12[] =
+{
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xe0000000L, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x28),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xcc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x88),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xbc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x90),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x2),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x94),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x98),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x9c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xac),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x38),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x3c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x40),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x44),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x48),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x70),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x74),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x78),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x7c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x80),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x84),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x50),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x54),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x58),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x5c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x60),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x64),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x68),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x6c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x3),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x20),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x24),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x28),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x28),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x2c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x2c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x30),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1d),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x30),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1d),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x34),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x34),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x38),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x38),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x3c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x3c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x18),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x50),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x50),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x54),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x54),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x58),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x58),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x5c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x5c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x48),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x48),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x40),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x40),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x44),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x44),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1a),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x60),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x60),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x64),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x64),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x70),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x70),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x74),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x74),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x68),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x68),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x6c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x6c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x78),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x78),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x7c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x7c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x88),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x88),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x8c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x80),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x80),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x84),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x84),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x90),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x90),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x94),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x94),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x98),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x98),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x9c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x9c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xa8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xac),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xac),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xbc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xbc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xb4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xc8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xcc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xcc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xec),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xec),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x16),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xf8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xfc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x17),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xfc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x17),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x100),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x100),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x13),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x104),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x104),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xe0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x118),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x118),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x11c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x11c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x120),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x120),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x124),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x124),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xdc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xdc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x110),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x110),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x114),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x114),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x14),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x108),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x108),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x10c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x19),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0xd8),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1b),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x128),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x128),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x12c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x12c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x138),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x138),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x13c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x13c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x130),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x130),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x12),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x134),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x134),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xf),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x140),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x140),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x144),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x144),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x150),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x150),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x154),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x154),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x148),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x148),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x14c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x7),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x158),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x158),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x15c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x15c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x168),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x168),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xa),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x16c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x16c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x9),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x160),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x160),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x164),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x164),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x170),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x170),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x174),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x174),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x180),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x180),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x184),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x184),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x178),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x178),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x17c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x17c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x188),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x188),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x18c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x5),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x198),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x198),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xc),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x19c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x19c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x190),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x190),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xe),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x194),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x194),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x30),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xd),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x34),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x11),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1d),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1d),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1f),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x4),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0x1f),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_ADDR, 0xFFFFFFFF, 0x2c),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLB_SAMPLEDELAY_IND_DATA, 0xFFFFFFFF, 0xb),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLOBALS_SAMPLE_SKEW, 0x000000FF, 0x1f),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_GLOBALS_MUXSEL_SKEW, 0x000000FF, 0x22),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLE_SKEW, 0x000000FF, 0x1),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_SAMPLE_SKEW, 0x000000FF, 0x6),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_MUXSEL_SKEW, 0x000000FF, 0x10),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x10000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_SE_MUXSEL_SKEW, 0x000000FF, 0x15),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xffffff, 0x0),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRLC_SPM_DESER_START_SKEW, 0x000000FF, 0x35),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGRBM_GFX_INDEX, 0xFFFFFFFF, 0xe0000000)
+};
+
 #define DEFAULT_SH_MEM_CONFIG \
 	((SH_MEM_ADDRESS_MODE_64 << SH_MEM_CONFIG__ADDRESS_MODE__SHIFT) | \
 	 (SH_MEM_ALIGNMENT_MODE_UNALIGNED << SH_MEM_CONFIG__ALIGNMENT_MODE__SHIFT) | \
@@ -301,7 +3037,7 @@ static int gfx_v10_0_rlc_backdoor_autoload_enable(struct amdgpu_device *adev);
 static int gfx_v10_0_wait_for_rlc_autoload_complete(struct amdgpu_device *adev);
 static void gfx_v10_0_ring_emit_ce_meta(struct amdgpu_ring *ring, bool resume);
 static void gfx_v10_0_ring_emit_de_meta(struct amdgpu_ring *ring, bool resume);
-static void gfx_v10_0_ring_emit_tmz(struct amdgpu_ring *ring, bool start);
+static void gfx_v10_0_ring_emit_frame_cntl(struct amdgpu_ring *ring, bool start, bool secure);
 
 static void gfx10_kiq_set_resources(struct amdgpu_ring *kiq_ring, uint64_t queue_mask)
 {
@@ -431,6 +3167,9 @@ static void gfx_v10_0_init_golden_registers(struct amdgpu_device *adev)
 		soc15_program_register_sequence(adev,
 						golden_settings_gc_10_0_nv10,
 						(const u32)ARRAY_SIZE(golden_settings_gc_10_0_nv10));
+		soc15_program_register_sequence(adev,
+						golden_settings_gc_rlc_spm_10_0_nv10,
+						(const u32)ARRAY_SIZE(golden_settings_gc_rlc_spm_10_0_nv10));
 		break;
 	case CHIP_NAVI14:
 		soc15_program_register_sequence(adev,
@@ -439,6 +3178,9 @@ static void gfx_v10_0_init_golden_registers(struct amdgpu_device *adev)
 		soc15_program_register_sequence(adev,
 						golden_settings_gc_10_1_nv14,
 						(const u32)ARRAY_SIZE(golden_settings_gc_10_1_nv14));
+		soc15_program_register_sequence(adev,
+						golden_settings_gc_rlc_spm_10_1_nv14,
+						(const u32)ARRAY_SIZE(golden_settings_gc_rlc_spm_10_1_nv14));
 		break;
 	case CHIP_NAVI12:
 		soc15_program_register_sequence(adev,
@@ -447,6 +3189,9 @@ static void gfx_v10_0_init_golden_registers(struct amdgpu_device *adev)
 		soc15_program_register_sequence(adev,
 						golden_settings_gc_10_1_2_nv12,
 						(const u32)ARRAY_SIZE(golden_settings_gc_10_1_2_nv12));
+		soc15_program_register_sequence(adev,
+						golden_settings_gc_rlc_spm_10_1_2_nv12,
+						(const u32)ARRAY_SIZE(golden_settings_gc_rlc_spm_10_1_2_nv12));
 		break;
 	default:
 		break;
@@ -557,7 +3302,8 @@ static int gfx_v10_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	gpu_addr = adev->wb.gpu_addr + (index * 4);
 	adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 16, &ib);
+	r = amdgpu_ib_get(adev, NULL, 16,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err1;
 
@@ -1298,7 +4044,8 @@ static int gfx_v10_0_gfx_ring_init(struct amdgpu_device *adev, int ring_id,
 
 	irq_type = AMDGPU_CP_IRQ_GFX_ME0_PIPE0_EOP + ring->pipe;
 	r = amdgpu_ring_init(adev, ring, 1024,
-			     &adev->gfx.eop_irq, irq_type);
+			     &adev->gfx.eop_irq, irq_type,
+			     AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		return r;
 	return 0;
@@ -1309,7 +4056,8 @@ static int gfx_v10_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 {
 	int r;
 	unsigned irq_type;
-	struct amdgpu_ring *ring = &adev->gfx.compute_ring[ring_id];
+	struct amdgpu_ring *ring;
+	unsigned int hw_prio;
 
 	ring = &adev->gfx.compute_ring[ring_id];
 
@@ -1328,10 +4076,11 @@ static int gfx_v10_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->queue) ?
+			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
-			     &adev->gfx.eop_irq, irq_type);
+			     &adev->gfx.eop_irq, irq_type, hw_prio);
 	if (r)
 		return r;
 
@@ -2441,10 +5190,6 @@ static int gfx_v10_0_cp_gfx_enable(struct amdgpu_device *adev, bool enable)
 	tmp = REG_SET_FIELD(tmp, CP_ME_CNTL, ME_HALT, enable ? 0 : 1);
 	tmp = REG_SET_FIELD(tmp, CP_ME_CNTL, PFP_HALT, enable ? 0 : 1);
 	tmp = REG_SET_FIELD(tmp, CP_ME_CNTL, CE_HALT, enable ? 0 : 1);
-	if (!enable) {
-		for (i = 0; i < adev->gfx.num_gfx_rings; i++)
-			adev->gfx.gfx_ring[i].sched.ready = false;
-	}
 	WREG32_SOC15_RLC(GC, 0, mmCP_ME_CNTL, tmp);
 
 	for (i = 0; i < adev->usec_timeout; i++) {
@@ -2923,16 +5668,12 @@ static int gfx_v10_0_cp_gfx_resume(struct amdgpu_device *adev)
 
 static void gfx_v10_0_cp_compute_enable(struct amdgpu_device *adev, bool enable)
 {
-	int i;
-
 	if (enable) {
 		WREG32_SOC15(GC, 0, mmCP_MEC_CNTL, 0);
 	} else {
 		WREG32_SOC15(GC, 0, mmCP_MEC_CNTL,
 			     (CP_MEC_CNTL__MEC_ME1_HALT_MASK |
 			      CP_MEC_CNTL__MEC_ME2_HALT_MASK));
-		for (i = 0; i < adev->gfx.num_compute_rings; i++)
-			adev->gfx.compute_ring[i].sched.ready = false;
 		adev->gfx.kiq.ring.sched.ready = false;
 	}
 	udelay(50);
@@ -3268,11 +6009,8 @@ static void gfx_v10_0_compute_mqd_set_priority(struct amdgpu_ring *ring, struct
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
 		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->queue)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
-			ring->has_high_prio = true;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
-		} else {
-			ring->has_high_prio = false;
 		}
 	}
 }
@@ -4292,14 +7030,21 @@ static int gfx_v10_0_update_gfx_clock_gating(struct amdgpu_device *adev,
 
 static void gfx_v10_0_update_spm_vmid(struct amdgpu_device *adev, unsigned vmid)
 {
-	u32 data;
+	u32 reg, data;
 
-	data = RREG32_SOC15(GC, 0, mmRLC_SPM_MC_CNTL);
+	reg = SOC15_REG_OFFSET(GC, 0, mmRLC_SPM_MC_CNTL);
+	if (amdgpu_sriov_is_pp_one_vf(adev))
+		data = RREG32_NO_KIQ(reg);
+	else
+		data = RREG32(reg);
 
 	data &= ~RLC_SPM_MC_CNTL__RLC_SPM_VMID_MASK;
 	data |= (vmid & RLC_SPM_MC_CNTL__RLC_SPM_VMID_MASK) << RLC_SPM_MC_CNTL__RLC_SPM_VMID__SHIFT;
 
-	WREG32_SOC15(GC, 0, mmRLC_SPM_MC_CNTL, data);
+	if (amdgpu_sriov_is_pp_one_vf(adev))
+		WREG32_SOC15_NO_KIQ(GC, 0, mmRLC_SPM_MC_CNTL, data);
+	else
+		WREG32_SOC15(GC, 0, mmRLC_SPM_MC_CNTL, data);
 }
 
 static bool gfx_v10_0_check_rlcg_range(struct amdgpu_device *adev,
@@ -4350,6 +7095,10 @@ static int gfx_v10_0_set_powergating_state(void *handle,
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 	bool enable = (state == AMD_PG_STATE_GATE);
+
+	if (amdgpu_sriov_vf(adev))
+		return 0;
+
 	switch (adev->asic_type) {
 	case CHIP_NAVI10:
 	case CHIP_NAVI14:
@@ -4370,6 +7119,9 @@ static int gfx_v10_0_set_clockgating_state(void *handle,
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
+	if (amdgpu_sriov_vf(adev))
+		return 0;
+
 	switch (adev->asic_type) {
 	case CHIP_NAVI10:
 	case CHIP_NAVI14:
@@ -4682,7 +7434,8 @@ static void gfx_v10_0_ring_emit_sb(struct amdgpu_ring *ring)
 	amdgpu_ring_write(ring, 0);
 }
 
-static void gfx_v10_0_ring_emit_cntxcntl(struct amdgpu_ring *ring, uint32_t flags)
+static void gfx_v10_0_ring_emit_cntxcntl(struct amdgpu_ring *ring,
+					 uint32_t flags)
 {
 	uint32_t dw2 = 0;
 
@@ -4690,8 +7443,6 @@ static void gfx_v10_0_ring_emit_cntxcntl(struct amdgpu_ring *ring, uint32_t flag
 		gfx_v10_0_ring_emit_ce_meta(ring,
 				    (!amdgpu_sriov_vf(ring->adev) && flags & AMDGPU_IB_PREEMPTED) ? true : false);
 
-	gfx_v10_0_ring_emit_tmz(ring, true);
-
 	dw2 |= 0x80000000; /* set load_enable otherwise this package is just NOPs */
 	if (flags & AMDGPU_HAVE_CTX_SWITCH) {
 		/* set load_global_config & load_global_uconfig */
@@ -4848,16 +7599,19 @@ static void gfx_v10_0_ring_emit_de_meta(struct amdgpu_ring *ring, bool resume)
 					   sizeof(de_payload) >> 2);
 }
 
-static void gfx_v10_0_ring_emit_tmz(struct amdgpu_ring *ring, bool start)
+static void gfx_v10_0_ring_emit_frame_cntl(struct amdgpu_ring *ring, bool start,
+				    bool secure)
 {
+	uint32_t v = secure ? FRAME_TMZ : 0;
+
 	amdgpu_ring_write(ring, PACKET3(PACKET3_FRAME_CONTROL, 0));
-	amdgpu_ring_write(ring, FRAME_CMD(start ? 0 : 1)); /* frame_end */
+	amdgpu_ring_write(ring, v | FRAME_CMD(start ? 0 : 1));
 }
 
-static void gfx_v10_0_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg)
+static void gfx_v10_0_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg,
+				     uint32_t reg_val_offs)
 {
 	struct amdgpu_device *adev = ring->adev;
-	struct amdgpu_kiq *kiq = &adev->gfx.kiq;
 
 	amdgpu_ring_write(ring, PACKET3(PACKET3_COPY_DATA, 4));
 	amdgpu_ring_write(ring, 0 |	/* src: register*/
@@ -4866,9 +7620,9 @@ static void gfx_v10_0_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg)
 	amdgpu_ring_write(ring, reg);
 	amdgpu_ring_write(ring, 0);
 	amdgpu_ring_write(ring, lower_32_bits(adev->wb.gpu_addr +
-				kiq->reg_val_offs * 4));
+				reg_val_offs * 4));
 	amdgpu_ring_write(ring, upper_32_bits(adev->wb.gpu_addr +
-				kiq->reg_val_offs * 4));
+				reg_val_offs * 4));
 }
 
 static void gfx_v10_0_ring_emit_wreg(struct amdgpu_ring *ring, uint32_t reg,
@@ -5241,6 +7995,29 @@ static int gfx_v10_0_kiq_irq(struct amdgpu_device *adev,
 	return 0;
 }
 
+static void gfx_v10_0_emit_mem_sync(struct amdgpu_ring *ring)
+{
+	const unsigned int gcr_cntl =
+			PACKET3_ACQUIRE_MEM_GCR_CNTL_GL2_INV(1) |
+			PACKET3_ACQUIRE_MEM_GCR_CNTL_GL2_WB(1) |
+			PACKET3_ACQUIRE_MEM_GCR_CNTL_GLM_INV(1) |
+			PACKET3_ACQUIRE_MEM_GCR_CNTL_GLM_WB(1) |
+			PACKET3_ACQUIRE_MEM_GCR_CNTL_GL1_INV(1) |
+			PACKET3_ACQUIRE_MEM_GCR_CNTL_GLV_INV(1) |
+			PACKET3_ACQUIRE_MEM_GCR_CNTL_GLK_INV(1) |
+			PACKET3_ACQUIRE_MEM_GCR_CNTL_GLI_INV(1);
+
+	/* ACQUIRE_MEM - make one or more surfaces valid for use by the subsequent operations */
+	amdgpu_ring_write(ring, PACKET3(PACKET3_ACQUIRE_MEM, 6));
+	amdgpu_ring_write(ring, 0); /* CP_COHER_CNTL */
+	amdgpu_ring_write(ring, 0xffffffff);  /* CP_COHER_SIZE */
+	amdgpu_ring_write(ring, 0xffffff);  /* CP_COHER_SIZE_HI */
+	amdgpu_ring_write(ring, 0); /* CP_COHER_BASE */
+	amdgpu_ring_write(ring, 0);  /* CP_COHER_BASE_HI */
+	amdgpu_ring_write(ring, 0x0000000A); /* POLL_INTERVAL */
+	amdgpu_ring_write(ring, gcr_cntl); /* GCR_CNTL */
+}
+
 static const struct amd_ip_funcs gfx_v10_0_ip_funcs = {
 	.name = "gfx_v10_0",
 	.early_init = gfx_v10_0_early_init,
@@ -5288,7 +8065,8 @@ static const struct amdgpu_ring_funcs gfx_v10_0_ring_funcs_gfx = {
 		3 + /* CNTX_CTRL */
 		5 + /* HDP_INVL */
 		8 + 8 + /* FENCE x2 */
-		2, /* SWITCH_BUFFER */
+		2 + /* SWITCH_BUFFER */
+		8, /* gfx_v10_0_emit_mem_sync */
 	.emit_ib_size =	4, /* gfx_v10_0_ring_emit_ib_gfx */
 	.emit_ib = gfx_v10_0_ring_emit_ib_gfx,
 	.emit_fence = gfx_v10_0_ring_emit_fence,
@@ -5305,10 +8083,11 @@ static const struct amdgpu_ring_funcs gfx_v10_0_ring_funcs_gfx = {
 	.init_cond_exec = gfx_v10_0_ring_emit_init_cond_exec,
 	.patch_cond_exec = gfx_v10_0_ring_emit_patch_cond_exec,
 	.preempt_ib = gfx_v10_0_ring_preempt_ib,
-	.emit_tmz = gfx_v10_0_ring_emit_tmz,
+	.emit_frame_cntl = gfx_v10_0_ring_emit_frame_cntl,
 	.emit_wreg = gfx_v10_0_ring_emit_wreg,
 	.emit_reg_wait = gfx_v10_0_ring_emit_reg_wait,
 	.emit_reg_write_reg_wait = gfx_v10_0_ring_emit_reg_write_reg_wait,
+	.emit_mem_sync = gfx_v10_0_emit_mem_sync,
 };
 
 static const struct amdgpu_ring_funcs gfx_v10_0_ring_funcs_compute = {
@@ -5343,6 +8122,7 @@ static const struct amdgpu_ring_funcs gfx_v10_0_ring_funcs_compute = {
 	.emit_wreg = gfx_v10_0_ring_emit_wreg,
 	.emit_reg_wait = gfx_v10_0_ring_emit_reg_wait,
 	.emit_reg_write_reg_wait = gfx_v10_0_ring_emit_reg_write_reg_wait,
+	.emit_mem_sync = gfx_v10_0_emit_mem_sync,
 };
 
 static const struct amdgpu_ring_funcs gfx_v10_0_ring_funcs_kiq = {
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c
index 31f44d05e606..05e94379c7b3 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c
@@ -1914,7 +1914,8 @@ static int gfx_v6_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 
 	WREG32(scratch, 0xCAFEDEAD);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 256, &ib);
+	r = amdgpu_ib_get(adev, NULL, 256,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err1;
 
@@ -1950,7 +1951,6 @@ static int gfx_v6_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 
 static void gfx_v6_0_cp_gfx_enable(struct amdgpu_device *adev, bool enable)
 {
-	int i;
 	if (enable) {
 		WREG32(mmCP_ME_CNTL, 0);
 	} else {
@@ -1958,10 +1958,6 @@ static void gfx_v6_0_cp_gfx_enable(struct amdgpu_device *adev, bool enable)
 				      CP_ME_CNTL__PFP_HALT_MASK |
 				      CP_ME_CNTL__CE_HALT_MASK));
 		WREG32(mmSCRATCH_UMSK, 0);
-		for (i = 0; i < adev->gfx.num_gfx_rings; i++)
-			adev->gfx.gfx_ring[i].sched.ready = false;
-		for (i = 0; i < adev->gfx.num_compute_rings; i++)
-			adev->gfx.compute_ring[i].sched.ready = false;
 	}
 	udelay(50);
 }
@@ -3114,7 +3110,9 @@ static int gfx_v6_0_sw_init(void *handle)
 		ring->ring_obj = NULL;
 		sprintf(ring->name, "gfx");
 		r = amdgpu_ring_init(adev, ring, 1024,
-				     &adev->gfx.eop_irq, AMDGPU_CP_IRQ_GFX_ME0_PIPE0_EOP);
+				     &adev->gfx.eop_irq,
+				     AMDGPU_CP_IRQ_GFX_ME0_PIPE0_EOP,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -3136,7 +3134,8 @@ static int gfx_v6_0_sw_init(void *handle)
 		sprintf(ring->name, "comp_%d.%d.%d", ring->me, ring->pipe, ring->queue);
 		irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP + ring->pipe;
 		r = amdgpu_ring_init(adev, ring, 1024,
-				     &adev->gfx.eop_irq, irq_type);
+				     &adev->gfx.eop_irq, irq_type,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -3466,6 +3465,18 @@ static int gfx_v6_0_set_powergating_state(void *handle,
 	return 0;
 }
 
+static void gfx_v6_0_emit_mem_sync(struct amdgpu_ring *ring)
+{
+	amdgpu_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
+	amdgpu_ring_write(ring, PACKET3_TCL1_ACTION_ENA |
+			  PACKET3_TC_ACTION_ENA |
+			  PACKET3_SH_KCACHE_ACTION_ENA |
+			  PACKET3_SH_ICACHE_ACTION_ENA);  /* CP_COHER_CNTL */
+	amdgpu_ring_write(ring, 0xffffffff);  /* CP_COHER_SIZE */
+	amdgpu_ring_write(ring, 0);  /* CP_COHER_BASE */
+	amdgpu_ring_write(ring, 0x0000000A); /* poll interval */
+}
+
 static const struct amd_ip_funcs gfx_v6_0_ip_funcs = {
 	.name = "gfx_v6_0",
 	.early_init = gfx_v6_0_early_init,
@@ -3496,7 +3507,8 @@ static const struct amdgpu_ring_funcs gfx_v6_0_ring_funcs_gfx = {
 		14 + 14 + 14 + /* gfx_v6_0_ring_emit_fence x3 for user fence, vm fence */
 		7 + 4 + /* gfx_v6_0_ring_emit_pipeline_sync */
 		SI_FLUSH_GPU_TLB_NUM_WREG * 5 + 7 + 6 + /* gfx_v6_0_ring_emit_vm_flush */
-		3 + 2, /* gfx_v6_ring_emit_cntxcntl including vgt flush */
+		3 + 2 + /* gfx_v6_ring_emit_cntxcntl including vgt flush */
+		5, /* SURFACE_SYNC */
 	.emit_ib_size = 6, /* gfx_v6_0_ring_emit_ib */
 	.emit_ib = gfx_v6_0_ring_emit_ib,
 	.emit_fence = gfx_v6_0_ring_emit_fence,
@@ -3507,6 +3519,7 @@ static const struct amdgpu_ring_funcs gfx_v6_0_ring_funcs_gfx = {
 	.insert_nop = amdgpu_ring_insert_nop,
 	.emit_cntxcntl = gfx_v6_ring_emit_cntxcntl,
 	.emit_wreg = gfx_v6_0_ring_emit_wreg,
+	.emit_mem_sync = gfx_v6_0_emit_mem_sync,
 };
 
 static const struct amdgpu_ring_funcs gfx_v6_0_ring_funcs_compute = {
@@ -3530,6 +3543,7 @@ static const struct amdgpu_ring_funcs gfx_v6_0_ring_funcs_compute = {
 	.test_ib = gfx_v6_0_ring_test_ib,
 	.insert_nop = amdgpu_ring_insert_nop,
 	.emit_wreg = gfx_v6_0_ring_emit_wreg,
+	.emit_mem_sync = gfx_v6_0_emit_mem_sync,
 };
 
 static void gfx_v6_0_set_ring_funcs(struct amdgpu_device *adev)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c
index 733d398c61cc..5d9226b871fa 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c
@@ -2364,7 +2364,8 @@ static int gfx_v7_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 
 	WREG32(scratch, 0xCAFEDEAD);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 256, &ib);
+	r = amdgpu_ib_get(adev, NULL, 256,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err1;
 
@@ -2431,15 +2432,12 @@ static int gfx_v7_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
  */
 static void gfx_v7_0_cp_gfx_enable(struct amdgpu_device *adev, bool enable)
 {
-	int i;
-
-	if (enable) {
+	if (enable)
 		WREG32(mmCP_ME_CNTL, 0);
-	} else {
-		WREG32(mmCP_ME_CNTL, (CP_ME_CNTL__ME_HALT_MASK | CP_ME_CNTL__PFP_HALT_MASK | CP_ME_CNTL__CE_HALT_MASK));
-		for (i = 0; i < adev->gfx.num_gfx_rings; i++)
-			adev->gfx.gfx_ring[i].sched.ready = false;
-	}
+	else
+		WREG32(mmCP_ME_CNTL, (CP_ME_CNTL__ME_HALT_MASK |
+				      CP_ME_CNTL__PFP_HALT_MASK |
+				      CP_ME_CNTL__CE_HALT_MASK));
 	udelay(50);
 }
 
@@ -2700,15 +2698,11 @@ static void gfx_v7_0_ring_set_wptr_compute(struct amdgpu_ring *ring)
  */
 static void gfx_v7_0_cp_compute_enable(struct amdgpu_device *adev, bool enable)
 {
-	int i;
-
-	if (enable) {
+	if (enable)
 		WREG32(mmCP_MEC_CNTL, 0);
-	} else {
-		WREG32(mmCP_MEC_CNTL, (CP_MEC_CNTL__MEC_ME1_HALT_MASK | CP_MEC_CNTL__MEC_ME2_HALT_MASK));
-		for (i = 0; i < adev->gfx.num_compute_rings; i++)
-			adev->gfx.compute_ring[i].sched.ready = false;
-	}
+	else
+		WREG32(mmCP_MEC_CNTL, (CP_MEC_CNTL__MEC_ME1_HALT_MASK |
+				       CP_MEC_CNTL__MEC_ME2_HALT_MASK));
 	udelay(50);
 }
 
@@ -4439,7 +4433,8 @@ static int gfx_v7_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
-			&adev->gfx.eop_irq, irq_type);
+			     &adev->gfx.eop_irq, irq_type,
+			     AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		return r;
 
@@ -4511,7 +4506,9 @@ static int gfx_v7_0_sw_init(void *handle)
 		ring->ring_obj = NULL;
 		sprintf(ring->name, "gfx");
 		r = amdgpu_ring_init(adev, ring, 1024,
-				     &adev->gfx.eop_irq, AMDGPU_CP_IRQ_GFX_ME0_PIPE0_EOP);
+				     &adev->gfx.eop_irq,
+				     AMDGPU_CP_IRQ_GFX_ME0_PIPE0_EOP,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -5001,6 +4998,32 @@ static int gfx_v7_0_set_powergating_state(void *handle,
 	return 0;
 }
 
+static void gfx_v7_0_emit_mem_sync(struct amdgpu_ring *ring)
+{
+	amdgpu_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
+	amdgpu_ring_write(ring, PACKET3_TCL1_ACTION_ENA |
+			  PACKET3_TC_ACTION_ENA |
+			  PACKET3_SH_KCACHE_ACTION_ENA |
+			  PACKET3_SH_ICACHE_ACTION_ENA);  /* CP_COHER_CNTL */
+	amdgpu_ring_write(ring, 0xffffffff);  /* CP_COHER_SIZE */
+	amdgpu_ring_write(ring, 0);  /* CP_COHER_BASE */
+	amdgpu_ring_write(ring, 0x0000000A); /* poll interval */
+}
+
+static void gfx_v7_0_emit_mem_sync_compute(struct amdgpu_ring *ring)
+{
+	amdgpu_ring_write(ring, PACKET3(PACKET3_ACQUIRE_MEM, 5));
+	amdgpu_ring_write(ring, PACKET3_TCL1_ACTION_ENA |
+			  PACKET3_TC_ACTION_ENA |
+			  PACKET3_SH_KCACHE_ACTION_ENA |
+			  PACKET3_SH_ICACHE_ACTION_ENA);  /* CP_COHER_CNTL */
+	amdgpu_ring_write(ring, 0xffffffff);	/* CP_COHER_SIZE */
+	amdgpu_ring_write(ring, 0xff);		/* CP_COHER_SIZE_HI */
+	amdgpu_ring_write(ring, 0);		/* CP_COHER_BASE */
+	amdgpu_ring_write(ring, 0);		/* CP_COHER_BASE_HI */
+	amdgpu_ring_write(ring, 0x0000000A);	/* poll interval */
+}
+
 static const struct amd_ip_funcs gfx_v7_0_ip_funcs = {
 	.name = "gfx_v7_0",
 	.early_init = gfx_v7_0_early_init,
@@ -5033,7 +5056,8 @@ static const struct amdgpu_ring_funcs gfx_v7_0_ring_funcs_gfx = {
 		12 + 12 + 12 + /* gfx_v7_0_ring_emit_fence_gfx x3 for user fence, vm fence */
 		7 + 4 + /* gfx_v7_0_ring_emit_pipeline_sync */
 		CIK_FLUSH_GPU_TLB_NUM_WREG * 5 + 7 + 6 + /* gfx_v7_0_ring_emit_vm_flush */
-		3 + 4, /* gfx_v7_ring_emit_cntxcntl including vgt flush*/
+		3 + 4 + /* gfx_v7_ring_emit_cntxcntl including vgt flush*/
+		5, /* SURFACE_SYNC */
 	.emit_ib_size = 4, /* gfx_v7_0_ring_emit_ib_gfx */
 	.emit_ib = gfx_v7_0_ring_emit_ib_gfx,
 	.emit_fence = gfx_v7_0_ring_emit_fence_gfx,
@@ -5048,6 +5072,7 @@ static const struct amdgpu_ring_funcs gfx_v7_0_ring_funcs_gfx = {
 	.emit_cntxcntl = gfx_v7_ring_emit_cntxcntl,
 	.emit_wreg = gfx_v7_0_ring_emit_wreg,
 	.soft_recovery = gfx_v7_0_ring_soft_recovery,
+	.emit_mem_sync = gfx_v7_0_emit_mem_sync,
 };
 
 static const struct amdgpu_ring_funcs gfx_v7_0_ring_funcs_compute = {
@@ -5077,6 +5102,7 @@ static const struct amdgpu_ring_funcs gfx_v7_0_ring_funcs_compute = {
 	.insert_nop = amdgpu_ring_insert_nop,
 	.pad_ib = amdgpu_ring_generic_pad_ib,
 	.emit_wreg = gfx_v7_0_ring_emit_wreg,
+	.emit_mem_sync = gfx_v7_0_emit_mem_sync_compute,
 };
 
 static void gfx_v7_0_set_ring_funcs(struct amdgpu_device *adev)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index fc32586ef80b..14790f80a8a9 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -888,7 +888,8 @@ static int gfx_v8_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	gpu_addr = adev->wb.gpu_addr + (index * 4);
 	adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 16, &ib);
+	r = amdgpu_ib_get(adev, NULL, 16,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err1;
 
@@ -1550,7 +1551,8 @@ static int gfx_v8_0_do_edc_gpr_workarounds(struct amdgpu_device *adev)
 
 	/* allocate an indirect buffer to put the commands in */
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, total_size, &ib);
+	r = amdgpu_ib_get(adev, NULL, total_size,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r) {
 		DRM_ERROR("amdgpu: failed to get ib (%d).\n", r);
 		return r;
@@ -1892,6 +1894,7 @@ static int gfx_v8_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	int r;
 	unsigned irq_type;
 	struct amdgpu_ring *ring = &adev->gfx.compute_ring[ring_id];
+	unsigned int hw_prio;
 
 	ring = &adev->gfx.compute_ring[ring_id];
 
@@ -1911,9 +1914,11 @@ static int gfx_v8_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
 
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->queue) ?
+			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_RING_PRIO_DEFAULT;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
-			&adev->gfx.eop_irq, irq_type);
+			     &adev->gfx.eop_irq, irq_type, hw_prio);
 	if (r)
 		return r;
 
@@ -2017,7 +2022,8 @@ static int gfx_v8_0_sw_init(void *handle)
 		}
 
 		r = amdgpu_ring_init(adev, ring, 1024, &adev->gfx.eop_irq,
-				     AMDGPU_CP_IRQ_GFX_ME0_PIPE0_EOP);
+				     AMDGPU_CP_IRQ_GFX_ME0_PIPE0_EOP,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -4120,7 +4126,6 @@ static int gfx_v8_0_rlc_resume(struct amdgpu_device *adev)
 
 static void gfx_v8_0_cp_gfx_enable(struct amdgpu_device *adev, bool enable)
 {
-	int i;
 	u32 tmp = RREG32(mmCP_ME_CNTL);
 
 	if (enable) {
@@ -4131,8 +4136,6 @@ static void gfx_v8_0_cp_gfx_enable(struct amdgpu_device *adev, bool enable)
 		tmp = REG_SET_FIELD(tmp, CP_ME_CNTL, ME_HALT, 1);
 		tmp = REG_SET_FIELD(tmp, CP_ME_CNTL, PFP_HALT, 1);
 		tmp = REG_SET_FIELD(tmp, CP_ME_CNTL, CE_HALT, 1);
-		for (i = 0; i < adev->gfx.num_gfx_rings; i++)
-			adev->gfx.gfx_ring[i].sched.ready = false;
 	}
 	WREG32(mmCP_ME_CNTL, tmp);
 	udelay(50);
@@ -4320,14 +4323,10 @@ static int gfx_v8_0_cp_gfx_resume(struct amdgpu_device *adev)
 
 static void gfx_v8_0_cp_compute_enable(struct amdgpu_device *adev, bool enable)
 {
-	int i;
-
 	if (enable) {
 		WREG32(mmCP_MEC_CNTL, 0);
 	} else {
 		WREG32(mmCP_MEC_CNTL, (CP_MEC_CNTL__MEC_ME1_HALT_MASK | CP_MEC_CNTL__MEC_ME2_HALT_MASK));
-		for (i = 0; i < adev->gfx.num_compute_rings; i++)
-			adev->gfx.compute_ring[i].sched.ready = false;
 		adev->gfx.kiq.ring.sched.ready = false;
 	}
 	udelay(50);
@@ -4437,11 +4436,8 @@ static void gfx_v8_0_mqd_set_priority(struct amdgpu_ring *ring, struct vi_mqd *m
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
 		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->queue)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
-			ring->has_high_prio = true;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
-		} else {
-			ring->has_high_prio = false;
 		}
 	}
 }
@@ -5619,12 +5615,18 @@ static void gfx_v8_0_update_spm_vmid(struct amdgpu_device *adev, unsigned vmid)
 {
 	u32 data;
 
-	data = RREG32(mmRLC_SPM_VMID);
+	if (amdgpu_sriov_is_pp_one_vf(adev))
+		data = RREG32_NO_KIQ(mmRLC_SPM_VMID);
+	else
+		data = RREG32(mmRLC_SPM_VMID);
 
 	data &= ~RLC_SPM_VMID__RLC_SPM_VMID_MASK;
 	data |= (vmid & RLC_SPM_VMID__RLC_SPM_VMID_MASK) << RLC_SPM_VMID__RLC_SPM_VMID__SHIFT;
 
-	WREG32(mmRLC_SPM_VMID, data);
+	if (amdgpu_sriov_is_pp_one_vf(adev))
+		WREG32_NO_KIQ(mmRLC_SPM_VMID, data);
+	else
+		WREG32(mmRLC_SPM_VMID, data);
 }
 
 static const struct amdgpu_rlc_funcs iceland_rlc_funcs = {
@@ -6387,10 +6389,10 @@ static void gfx_v8_0_ring_emit_patch_cond_exec(struct amdgpu_ring *ring, unsigne
 		ring->ring[offset] = (ring->ring_size >> 2) - offset + cur;
 }
 
-static void gfx_v8_0_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg)
+static void gfx_v8_0_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg,
+				    uint32_t reg_val_offs)
 {
 	struct amdgpu_device *adev = ring->adev;
-	struct amdgpu_kiq *kiq = &adev->gfx.kiq;
 
 	amdgpu_ring_write(ring, PACKET3(PACKET3_COPY_DATA, 4));
 	amdgpu_ring_write(ring, 0 |	/* src: register*/
@@ -6399,9 +6401,9 @@ static void gfx_v8_0_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg)
 	amdgpu_ring_write(ring, reg);
 	amdgpu_ring_write(ring, 0);
 	amdgpu_ring_write(ring, lower_32_bits(adev->wb.gpu_addr +
-				kiq->reg_val_offs * 4));
+				reg_val_offs * 4));
 	amdgpu_ring_write(ring, upper_32_bits(adev->wb.gpu_addr +
-				kiq->reg_val_offs * 4));
+				reg_val_offs * 4));
 }
 
 static void gfx_v8_0_ring_emit_wreg(struct amdgpu_ring *ring, uint32_t reg,
@@ -6815,6 +6817,34 @@ static int gfx_v8_0_sq_irq(struct amdgpu_device *adev,
 	return 0;
 }
 
+static void gfx_v8_0_emit_mem_sync(struct amdgpu_ring *ring)
+{
+	amdgpu_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
+	amdgpu_ring_write(ring, PACKET3_TCL1_ACTION_ENA |
+			  PACKET3_TC_ACTION_ENA |
+			  PACKET3_SH_KCACHE_ACTION_ENA |
+			  PACKET3_SH_ICACHE_ACTION_ENA |
+			  PACKET3_TC_WB_ACTION_ENA);  /* CP_COHER_CNTL */
+	amdgpu_ring_write(ring, 0xffffffff);  /* CP_COHER_SIZE */
+	amdgpu_ring_write(ring, 0);  /* CP_COHER_BASE */
+	amdgpu_ring_write(ring, 0x0000000A); /* poll interval */
+}
+
+static void gfx_v8_0_emit_mem_sync_compute(struct amdgpu_ring *ring)
+{
+	amdgpu_ring_write(ring, PACKET3(PACKET3_ACQUIRE_MEM, 5));
+	amdgpu_ring_write(ring, PACKET3_TCL1_ACTION_ENA |
+			  PACKET3_TC_ACTION_ENA |
+			  PACKET3_SH_KCACHE_ACTION_ENA |
+			  PACKET3_SH_ICACHE_ACTION_ENA |
+			  PACKET3_TC_WB_ACTION_ENA);  /* CP_COHER_CNTL */
+	amdgpu_ring_write(ring, 0xffffffff);	/* CP_COHER_SIZE */
+	amdgpu_ring_write(ring, 0xff);		/* CP_COHER_SIZE_HI */
+	amdgpu_ring_write(ring, 0);		/* CP_COHER_BASE */
+	amdgpu_ring_write(ring, 0);		/* CP_COHER_BASE_HI */
+	amdgpu_ring_write(ring, 0x0000000A);	/* poll interval */
+}
+
 static const struct amd_ip_funcs gfx_v8_0_ip_funcs = {
 	.name = "gfx_v8_0",
 	.early_init = gfx_v8_0_early_init,
@@ -6861,7 +6891,8 @@ static const struct amdgpu_ring_funcs gfx_v8_0_ring_funcs_gfx = {
 		3 + /* CNTX_CTRL */
 		5 + /* HDP_INVL */
 		12 + 12 + /* FENCE x2 */
-		2, /* SWITCH_BUFFER */
+		2 + /* SWITCH_BUFFER */
+		5, /* SURFACE_SYNC */
 	.emit_ib_size =	4, /* gfx_v8_0_ring_emit_ib_gfx */
 	.emit_ib = gfx_v8_0_ring_emit_ib_gfx,
 	.emit_fence = gfx_v8_0_ring_emit_fence_gfx,
@@ -6879,6 +6910,7 @@ static const struct amdgpu_ring_funcs gfx_v8_0_ring_funcs_gfx = {
 	.patch_cond_exec = gfx_v8_0_ring_emit_patch_cond_exec,
 	.emit_wreg = gfx_v8_0_ring_emit_wreg,
 	.soft_recovery = gfx_v8_0_ring_soft_recovery,
+	.emit_mem_sync = gfx_v8_0_emit_mem_sync,
 };
 
 static const struct amdgpu_ring_funcs gfx_v8_0_ring_funcs_compute = {
@@ -6908,6 +6940,7 @@ static const struct amdgpu_ring_funcs gfx_v8_0_ring_funcs_compute = {
 	.insert_nop = amdgpu_ring_insert_nop,
 	.pad_ib = amdgpu_ring_generic_pad_ib,
 	.emit_wreg = gfx_v8_0_ring_emit_wreg,
+	.emit_mem_sync = gfx_v8_0_emit_mem_sync_compute,
 };
 
 static const struct amdgpu_ring_funcs gfx_v8_0_ring_funcs_kiq = {
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 0c390485bc10..2767c6d03370 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -50,18 +50,14 @@
 
 #include "gfx_v9_4.h"
 
+#include "asic_reg/pwr/pwr_10_0_offset.h"
+#include "asic_reg/pwr/pwr_10_0_sh_mask.h"
+
 #define GFX9_NUM_GFX_RINGS     1
 #define GFX9_MEC_HPD_SIZE 4096
 #define RLCG_UCODE_LOADING_START_ADDRESS 0x00002000L
 #define RLC_SAVE_RESTORE_ADDR_STARTING_OFFSET 0x00000000L
 
-#define mmPWR_MISC_CNTL_STATUS					0x0183
-#define mmPWR_MISC_CNTL_STATUS_BASE_IDX				0
-#define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN__SHIFT	0x0
-#define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS__SHIFT		0x1
-#define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN_MASK		0x00000001L
-#define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS_MASK		0x00000006L
-
 #define mmGCEA_PROBE_MAP                        0x070c
 #define mmGCEA_PROBE_MAP_BASE_IDX               0
 
@@ -1082,7 +1078,8 @@ static int gfx_v9_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	gpu_addr = adev->wb.gpu_addr + (index * 4);
 	adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 16, &ib);
+	r = amdgpu_ib_get(adev, NULL, 16,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err1;
 
@@ -2197,6 +2194,7 @@ static int gfx_v9_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	int r;
 	unsigned irq_type;
 	struct amdgpu_ring *ring = &adev->gfx.compute_ring[ring_id];
+	unsigned int hw_prio;
 
 	ring = &adev->gfx.compute_ring[ring_id];
 
@@ -2215,10 +2213,11 @@ static int gfx_v9_0_compute_ring_init(struct amdgpu_device *adev, int ring_id,
 	irq_type = AMDGPU_CP_IRQ_COMPUTE_MEC1_PIPE0_EOP
 		+ ((ring->me - 1) * adev->gfx.mec.num_pipe_per_mec)
 		+ ring->pipe;
-
+	hw_prio = amdgpu_gfx_is_high_priority_compute_queue(adev, ring->queue) ?
+			AMDGPU_GFX_PIPE_PRIO_HIGH : AMDGPU_GFX_PIPE_PRIO_NORMAL;
 	/* type-2 packets are deprecated on MEC, use type-3 instead */
 	r = amdgpu_ring_init(adev, ring, 1024,
-			     &adev->gfx.eop_irq, irq_type);
+			     &adev->gfx.eop_irq, irq_type, hw_prio);
 	if (r)
 		return r;
 
@@ -2312,7 +2311,9 @@ static int gfx_v9_0_sw_init(void *handle)
 		ring->use_doorbell = true;
 		ring->doorbell_index = adev->doorbell_index.gfx_ring0 << 1;
 		r = amdgpu_ring_init(adev, ring, 1024,
-				     &adev->gfx.eop_irq, AMDGPU_CP_IRQ_GFX_ME0_PIPE0_EOP);
+				     &adev->gfx.eop_irq,
+				     AMDGPU_CP_IRQ_GFX_ME0_PIPE0_EOP,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -2530,7 +2531,7 @@ static void gfx_v9_0_init_sq_config(struct amdgpu_device *adev)
 		break;
 	default:
 		break;
-	};
+	}
 }
 
 static void gfx_v9_0_constants_init(struct amdgpu_device *adev)
@@ -3102,16 +3103,11 @@ static int gfx_v9_0_rlc_resume(struct amdgpu_device *adev)
 
 static void gfx_v9_0_cp_gfx_enable(struct amdgpu_device *adev, bool enable)
 {
-	int i;
 	u32 tmp = RREG32_SOC15(GC, 0, mmCP_ME_CNTL);
 
 	tmp = REG_SET_FIELD(tmp, CP_ME_CNTL, ME_HALT, enable ? 0 : 1);
 	tmp = REG_SET_FIELD(tmp, CP_ME_CNTL, PFP_HALT, enable ? 0 : 1);
 	tmp = REG_SET_FIELD(tmp, CP_ME_CNTL, CE_HALT, enable ? 0 : 1);
-	if (!enable) {
-		for (i = 0; i < adev->gfx.num_gfx_rings; i++)
-			adev->gfx.gfx_ring[i].sched.ready = false;
-	}
 	WREG32_SOC15_RLC(GC, 0, mmCP_ME_CNTL, tmp);
 	udelay(50);
 }
@@ -3307,15 +3303,11 @@ static int gfx_v9_0_cp_gfx_resume(struct amdgpu_device *adev)
 
 static void gfx_v9_0_cp_compute_enable(struct amdgpu_device *adev, bool enable)
 {
-	int i;
-
 	if (enable) {
 		WREG32_SOC15_RLC(GC, 0, mmCP_MEC_CNTL, 0);
 	} else {
 		WREG32_SOC15_RLC(GC, 0, mmCP_MEC_CNTL,
 			(CP_MEC_CNTL__MEC_ME1_HALT_MASK | CP_MEC_CNTL__MEC_ME2_HALT_MASK));
-		for (i = 0; i < adev->gfx.num_compute_rings; i++)
-			adev->gfx.compute_ring[i].sched.ready = false;
 		adev->gfx.kiq.ring.sched.ready = false;
 	}
 	udelay(50);
@@ -3385,11 +3377,8 @@ static void gfx_v9_0_mqd_set_priority(struct amdgpu_ring *ring, struct v9_mqd *m
 	if (ring->funcs->type == AMDGPU_RING_TYPE_COMPUTE) {
 		if (amdgpu_gfx_is_high_priority_compute_queue(adev, ring->queue)) {
 			mqd->cp_hqd_pipe_priority = AMDGPU_GFX_PIPE_PRIO_HIGH;
-			ring->has_high_prio = true;
 			mqd->cp_hqd_queue_priority =
 				AMDGPU_GFX_QUEUE_PRIORITY_MAXIMUM;
-		} else {
-			ring->has_high_prio = false;
 		}
 	}
 }
@@ -4056,13 +4045,18 @@ static uint64_t gfx_v9_0_kiq_read_clock(struct amdgpu_device *adev)
 {
 	signed long r, cnt = 0;
 	unsigned long flags;
-	uint32_t seq;
+	uint32_t seq, reg_val_offs = 0;
+	uint64_t value = 0;
 	struct amdgpu_kiq *kiq = &adev->gfx.kiq;
 	struct amdgpu_ring *ring = &kiq->ring;
 
 	BUG_ON(!ring->funcs->emit_rreg);
 
 	spin_lock_irqsave(&kiq->ring_lock, flags);
+	if (amdgpu_device_wb_get(adev, &reg_val_offs)) {
+		pr_err("critical bug! too many kiq readers\n");
+		goto failed_unlock;
+	}
 	amdgpu_ring_alloc(ring, 32);
 	amdgpu_ring_write(ring, PACKET3(PACKET3_COPY_DATA, 4));
 	amdgpu_ring_write(ring, 9 |	/* src: register*/
@@ -4072,10 +4066,13 @@ static uint64_t gfx_v9_0_kiq_read_clock(struct amdgpu_device *adev)
 	amdgpu_ring_write(ring, 0);
 	amdgpu_ring_write(ring, 0);
 	amdgpu_ring_write(ring, lower_32_bits(adev->wb.gpu_addr +
-				kiq->reg_val_offs * 4));
+				reg_val_offs * 4));
 	amdgpu_ring_write(ring, upper_32_bits(adev->wb.gpu_addr +
-				kiq->reg_val_offs * 4));
-	amdgpu_fence_emit_polling(ring, &seq);
+				reg_val_offs * 4));
+	r = amdgpu_fence_emit_polling(ring, &seq, MAX_KIQ_REG_WAIT);
+	if (r)
+		goto failed_undo;
+
 	amdgpu_ring_commit(ring);
 	spin_unlock_irqrestore(&kiq->ring_lock, flags);
 
@@ -4101,10 +4098,19 @@ static uint64_t gfx_v9_0_kiq_read_clock(struct amdgpu_device *adev)
 	if (cnt > MAX_KIQ_REG_TRY)
 		goto failed_kiq_read;
 
-	return (uint64_t)adev->wb.wb[kiq->reg_val_offs] |
-		(uint64_t)adev->wb.wb[kiq->reg_val_offs + 1 ] << 32ULL;
+	mb();
+	value = (uint64_t)adev->wb.wb[reg_val_offs] |
+		(uint64_t)adev->wb.wb[reg_val_offs + 1 ] << 32ULL;
+	amdgpu_device_wb_free(adev, reg_val_offs);
+	return value;
 
+failed_undo:
+	amdgpu_ring_undo(ring);
+failed_unlock:
+	spin_unlock_irqrestore(&kiq->ring_lock, flags);
 failed_kiq_read:
+	if (reg_val_offs)
+		amdgpu_device_wb_free(adev, reg_val_offs);
 	pr_err("failed to read gpu clock\n");
 	return ~0;
 }
@@ -4489,7 +4495,8 @@ static int gfx_v9_0_do_edc_gpr_workarounds(struct amdgpu_device *adev)
 
 	/* allocate an indirect buffer to put the commands in */
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, total_size, &ib);
+	r = amdgpu_ib_get(adev, NULL, total_size,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r) {
 		DRM_ERROR("amdgpu: failed to get ib (%d).\n", r);
 		return r;
@@ -4960,14 +4967,21 @@ static int gfx_v9_0_update_gfx_clock_gating(struct amdgpu_device *adev,
 
 static void gfx_v9_0_update_spm_vmid(struct amdgpu_device *adev, unsigned vmid)
 {
-	u32 data;
+	u32 reg, data;
 
-	data = RREG32_SOC15(GC, 0, mmRLC_SPM_MC_CNTL);
+	reg = SOC15_REG_OFFSET(GC, 0, mmRLC_SPM_MC_CNTL);
+	if (amdgpu_sriov_is_pp_one_vf(adev))
+		data = RREG32_NO_KIQ(reg);
+	else
+		data = RREG32(reg);
 
 	data &= ~RLC_SPM_MC_CNTL__RLC_SPM_VMID_MASK;
 	data |= (vmid & RLC_SPM_MC_CNTL__RLC_SPM_VMID_MASK) << RLC_SPM_MC_CNTL__RLC_SPM_VMID__SHIFT;
 
-	WREG32_SOC15(GC, 0, mmRLC_SPM_MC_CNTL, data);
+	if (amdgpu_sriov_is_pp_one_vf(adev))
+		WREG32_SOC15_NO_KIQ(GC, 0, mmRLC_SPM_MC_CNTL, data);
+	else
+		WREG32_SOC15(GC, 0, mmRLC_SPM_MC_CNTL, data);
 }
 
 static bool gfx_v9_0_check_rlcg_range(struct amdgpu_device *adev,
@@ -5428,10 +5442,13 @@ static void gfx_v9_0_ring_emit_de_meta(struct amdgpu_ring *ring)
 	amdgpu_ring_write_multiple(ring, (void *)&de_payload, sizeof(de_payload) >> 2);
 }
 
-static void gfx_v9_0_ring_emit_tmz(struct amdgpu_ring *ring, bool start)
+static void gfx_v9_0_ring_emit_frame_cntl(struct amdgpu_ring *ring, bool start,
+				   bool secure)
 {
+	uint32_t v = secure ? FRAME_TMZ : 0;
+
 	amdgpu_ring_write(ring, PACKET3(PACKET3_FRAME_CONTROL, 0));
-	amdgpu_ring_write(ring, FRAME_CMD(start ? 0 : 1)); /* frame_end */
+	amdgpu_ring_write(ring, v | FRAME_CMD(start ? 0 : 1));
 }
 
 static void gfx_v9_ring_emit_cntxcntl(struct amdgpu_ring *ring, uint32_t flags)
@@ -5441,8 +5458,6 @@ static void gfx_v9_ring_emit_cntxcntl(struct amdgpu_ring *ring, uint32_t flags)
 	if (amdgpu_sriov_vf(ring->adev))
 		gfx_v9_0_ring_emit_ce_meta(ring);
 
-	gfx_v9_0_ring_emit_tmz(ring, true);
-
 	dw2 |= 0x80000000; /* set load_enable otherwise this package is just NOPs */
 	if (flags & AMDGPU_HAVE_CTX_SWITCH) {
 		/* set load_global_config & load_global_uconfig */
@@ -5493,10 +5508,10 @@ static void gfx_v9_0_ring_emit_patch_cond_exec(struct amdgpu_ring *ring, unsigne
 		ring->ring[offset] = (ring->ring_size>>2) - offset + cur;
 }
 
-static void gfx_v9_0_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg)
+static void gfx_v9_0_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg,
+				    uint32_t reg_val_offs)
 {
 	struct amdgpu_device *adev = ring->adev;
-	struct amdgpu_kiq *kiq = &adev->gfx.kiq;
 
 	amdgpu_ring_write(ring, PACKET3(PACKET3_COPY_DATA, 4));
 	amdgpu_ring_write(ring, 0 |	/* src: register*/
@@ -5505,9 +5520,9 @@ static void gfx_v9_0_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg)
 	amdgpu_ring_write(ring, reg);
 	amdgpu_ring_write(ring, 0);
 	amdgpu_ring_write(ring, lower_32_bits(adev->wb.gpu_addr +
-				kiq->reg_val_offs * 4));
+				reg_val_offs * 4));
 	amdgpu_ring_write(ring, upper_32_bits(adev->wb.gpu_addr +
-				kiq->reg_val_offs * 4));
+				reg_val_offs * 4));
 }
 
 static void gfx_v9_0_ring_emit_wreg(struct amdgpu_ring *ring, uint32_t reg,
@@ -6408,15 +6423,15 @@ static int gfx_v9_0_query_utc_edc_status(struct amdgpu_device *adev,
 
 		sec_count = REG_GET_FIELD(data, VM_L2_MEM_ECC_CNT, SEC_COUNT);
 		if (sec_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, SEC %d\n", i,
-				 vml2_mems[i], sec_count);
+			dev_info(adev->dev, "Instance[%d]: SubBlock %s, "
+				"SEC %d\n", i, vml2_mems[i], sec_count);
 			err_data->ce_count += sec_count;
 		}
 
 		ded_count = REG_GET_FIELD(data, VM_L2_MEM_ECC_CNT, DED_COUNT);
 		if (ded_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, DED %d\n", i,
-				 vml2_mems[i], ded_count);
+			dev_info(adev->dev, "Instance[%d]: SubBlock %s, "
+				"DED %d\n", i, vml2_mems[i], ded_count);
 			err_data->ue_count += ded_count;
 		}
 	}
@@ -6428,16 +6443,16 @@ static int gfx_v9_0_query_utc_edc_status(struct amdgpu_device *adev,
 		sec_count = REG_GET_FIELD(data, VM_L2_WALKER_MEM_ECC_CNT,
 						SEC_COUNT);
 		if (sec_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, SEC %d\n", i,
-				 vml2_walker_mems[i], sec_count);
+			dev_info(adev->dev, "Instance[%d]: SubBlock %s, "
+				"SEC %d\n", i, vml2_walker_mems[i], sec_count);
 			err_data->ce_count += sec_count;
 		}
 
 		ded_count = REG_GET_FIELD(data, VM_L2_WALKER_MEM_ECC_CNT,
 						DED_COUNT);
 		if (ded_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, DED %d\n", i,
-				 vml2_walker_mems[i], ded_count);
+			dev_info(adev->dev, "Instance[%d]: SubBlock %s, "
+				"DED %d\n", i, vml2_walker_mems[i], ded_count);
 			err_data->ue_count += ded_count;
 		}
 	}
@@ -6448,8 +6463,9 @@ static int gfx_v9_0_query_utc_edc_status(struct amdgpu_device *adev,
 
 		sec_count = (data & 0x00006000L) >> 0xd;
 		if (sec_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, SEC %d\n", i,
-				 atc_l2_cache_2m_mems[i], sec_count);
+			dev_info(adev->dev, "Instance[%d]: SubBlock %s, "
+				"SEC %d\n", i, atc_l2_cache_2m_mems[i],
+				sec_count);
 			err_data->ce_count += sec_count;
 		}
 	}
@@ -6460,15 +6476,17 @@ static int gfx_v9_0_query_utc_edc_status(struct amdgpu_device *adev,
 
 		sec_count = (data & 0x00006000L) >> 0xd;
 		if (sec_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, SEC %d\n", i,
-				 atc_l2_cache_4k_mems[i], sec_count);
+			dev_info(adev->dev, "Instance[%d]: SubBlock %s, "
+				"SEC %d\n", i, atc_l2_cache_4k_mems[i],
+				sec_count);
 			err_data->ce_count += sec_count;
 		}
 
 		ded_count = (data & 0x00018000L) >> 0xf;
 		if (ded_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, DED %d\n", i,
-				 atc_l2_cache_4k_mems[i], ded_count);
+			dev_info(adev->dev, "Instance[%d]: SubBlock %s, "
+				"DED %d\n", i, atc_l2_cache_4k_mems[i],
+				ded_count);
 			err_data->ue_count += ded_count;
 		}
 	}
@@ -6481,7 +6499,8 @@ static int gfx_v9_0_query_utc_edc_status(struct amdgpu_device *adev,
 	return 0;
 }
 
-static int gfx_v9_0_ras_error_count(const struct soc15_reg_entry *reg,
+static int gfx_v9_0_ras_error_count(struct amdgpu_device *adev,
+	const struct soc15_reg_entry *reg,
 	uint32_t se_id, uint32_t inst_id, uint32_t value,
 	uint32_t *sec_count, uint32_t *ded_count)
 {
@@ -6498,7 +6517,8 @@ static int gfx_v9_0_ras_error_count(const struct soc15_reg_entry *reg,
 				gfx_v9_0_ras_fields[i].sec_count_mask) >>
 				gfx_v9_0_ras_fields[i].sec_count_shift;
 		if (sec_cnt) {
-			DRM_INFO("GFX SubBlock %s, Instance[%d][%d], SEC %d\n",
+			dev_info(adev->dev, "GFX SubBlock %s, "
+				"Instance[%d][%d], SEC %d\n",
 				gfx_v9_0_ras_fields[i].name,
 				se_id, inst_id,
 				sec_cnt);
@@ -6509,7 +6529,8 @@ static int gfx_v9_0_ras_error_count(const struct soc15_reg_entry *reg,
 				gfx_v9_0_ras_fields[i].ded_count_mask) >>
 				gfx_v9_0_ras_fields[i].ded_count_shift;
 		if (ded_cnt) {
-			DRM_INFO("GFX SubBlock %s, Instance[%d][%d], DED %d\n",
+			dev_info(adev->dev, "GFX SubBlock %s, "
+				"Instance[%d][%d], DED %d\n",
 				gfx_v9_0_ras_fields[i].name,
 				se_id, inst_id,
 				ded_cnt);
@@ -6598,9 +6619,10 @@ static int gfx_v9_0_query_ras_error_count(struct amdgpu_device *adev,
 				reg_value =
 					RREG32(SOC15_REG_ENTRY_OFFSET(gfx_v9_0_edc_counter_regs[i]));
 				if (reg_value)
-					gfx_v9_0_ras_error_count(&gfx_v9_0_edc_counter_regs[i],
-							j, k, reg_value,
-							&sec_count, &ded_count);
+					gfx_v9_0_ras_error_count(adev,
+						&gfx_v9_0_edc_counter_regs[i],
+						j, k, reg_value,
+						&sec_count, &ded_count);
 			}
 		}
 	}
@@ -6616,6 +6638,25 @@ static int gfx_v9_0_query_ras_error_count(struct amdgpu_device *adev,
 	return 0;
 }
 
+static void gfx_v9_0_emit_mem_sync(struct amdgpu_ring *ring)
+{
+	const unsigned int cp_coher_cntl =
+			PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_SH_ICACHE_ACTION_ENA(1) |
+			PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_SH_KCACHE_ACTION_ENA(1) |
+			PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TC_ACTION_ENA(1) |
+			PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TCL1_ACTION_ENA(1) |
+			PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TC_WB_ACTION_ENA(1);
+
+	/* ACQUIRE_MEM -make one or more surfaces valid for use by the subsequent operations */
+	amdgpu_ring_write(ring, PACKET3(PACKET3_ACQUIRE_MEM, 5));
+	amdgpu_ring_write(ring, cp_coher_cntl); /* CP_COHER_CNTL */
+	amdgpu_ring_write(ring, 0xffffffff);  /* CP_COHER_SIZE */
+	amdgpu_ring_write(ring, 0xffffff);  /* CP_COHER_SIZE_HI */
+	amdgpu_ring_write(ring, 0); /* CP_COHER_BASE */
+	amdgpu_ring_write(ring, 0);  /* CP_COHER_BASE_HI */
+	amdgpu_ring_write(ring, 0x0000000A); /* POLL_INTERVAL */
+}
+
 static const struct amd_ip_funcs gfx_v9_0_ip_funcs = {
 	.name = "gfx_v9_0",
 	.early_init = gfx_v9_0_early_init,
@@ -6662,7 +6703,8 @@ static const struct amdgpu_ring_funcs gfx_v9_0_ring_funcs_gfx = {
 		3 + /* CNTX_CTRL */
 		5 + /* HDP_INVL */
 		8 + 8 + /* FENCE x2 */
-		2, /* SWITCH_BUFFER */
+		2 + /* SWITCH_BUFFER */
+		7, /* gfx_v9_0_emit_mem_sync */
 	.emit_ib_size =	4, /* gfx_v9_0_ring_emit_ib_gfx */
 	.emit_ib = gfx_v9_0_ring_emit_ib_gfx,
 	.emit_fence = gfx_v9_0_ring_emit_fence,
@@ -6678,11 +6720,12 @@ static const struct amdgpu_ring_funcs gfx_v9_0_ring_funcs_gfx = {
 	.emit_cntxcntl = gfx_v9_ring_emit_cntxcntl,
 	.init_cond_exec = gfx_v9_0_ring_emit_init_cond_exec,
 	.patch_cond_exec = gfx_v9_0_ring_emit_patch_cond_exec,
-	.emit_tmz = gfx_v9_0_ring_emit_tmz,
+	.emit_frame_cntl = gfx_v9_0_ring_emit_frame_cntl,
 	.emit_wreg = gfx_v9_0_ring_emit_wreg,
 	.emit_reg_wait = gfx_v9_0_ring_emit_reg_wait,
 	.emit_reg_write_reg_wait = gfx_v9_0_ring_emit_reg_write_reg_wait,
 	.soft_recovery = gfx_v9_0_ring_soft_recovery,
+	.emit_mem_sync = gfx_v9_0_emit_mem_sync,
 };
 
 static const struct amdgpu_ring_funcs gfx_v9_0_ring_funcs_compute = {
@@ -6717,6 +6760,7 @@ static const struct amdgpu_ring_funcs gfx_v9_0_ring_funcs_compute = {
 	.emit_wreg = gfx_v9_0_ring_emit_wreg,
 	.emit_reg_wait = gfx_v9_0_ring_emit_reg_wait,
 	.emit_reg_write_reg_wait = gfx_v9_0_ring_emit_reg_write_reg_wait,
+	.emit_mem_sync = gfx_v9_0_emit_mem_sync,
 };
 
 static const struct amdgpu_ring_funcs gfx_v9_0_ring_funcs_kiq = {
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
old mode 100644
new mode 100755
index dce945ef21a5..46351db36922
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
@@ -732,7 +732,8 @@ static int gfx_v9_4_query_utc_edc_status(struct amdgpu_device *adev,
 		sec_count = REG_GET_FIELD(data, VML2_WALKER_MEM_ECC_CNTL,
 					  SEC_COUNT);
 		if (sec_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, SEC %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, SEC %d\n", i,
 				 vml2_walker_mems[i], sec_count);
 			err_data->ce_count += sec_count;
 		}
@@ -740,7 +741,8 @@ static int gfx_v9_4_query_utc_edc_status(struct amdgpu_device *adev,
 		ded_count = REG_GET_FIELD(data, VML2_WALKER_MEM_ECC_CNTL,
 					  DED_COUNT);
 		if (ded_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, DED %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, DED %d\n", i,
 				 vml2_walker_mems[i], ded_count);
 			err_data->ue_count += ded_count;
 		}
@@ -752,14 +754,16 @@ static int gfx_v9_4_query_utc_edc_status(struct amdgpu_device *adev,
 
 		sec_count = REG_GET_FIELD(data, UTCL2_MEM_ECC_CNTL, SEC_COUNT);
 		if (sec_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, SEC %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, SEC %d\n", i,
 				 utcl2_router_mems[i], sec_count);
 			err_data->ce_count += sec_count;
 		}
 
 		ded_count = REG_GET_FIELD(data, UTCL2_MEM_ECC_CNTL, DED_COUNT);
 		if (ded_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, DED %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, DED %d\n", i,
 				 utcl2_router_mems[i], ded_count);
 			err_data->ue_count += ded_count;
 		}
@@ -772,7 +776,8 @@ static int gfx_v9_4_query_utc_edc_status(struct amdgpu_device *adev,
 		sec_count = REG_GET_FIELD(data, ATC_L2_CACHE_2M_DSM_CNTL,
 					  SEC_COUNT);
 		if (sec_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, SEC %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, SEC %d\n", i,
 				 atc_l2_cache_2m_mems[i], sec_count);
 			err_data->ce_count += sec_count;
 		}
@@ -780,7 +785,8 @@ static int gfx_v9_4_query_utc_edc_status(struct amdgpu_device *adev,
 		ded_count = REG_GET_FIELD(data, ATC_L2_CACHE_2M_DSM_CNTL,
 					  DED_COUNT);
 		if (ded_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, DED %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, DED %d\n", i,
 				 atc_l2_cache_2m_mems[i], ded_count);
 			err_data->ue_count += ded_count;
 		}
@@ -793,7 +799,8 @@ static int gfx_v9_4_query_utc_edc_status(struct amdgpu_device *adev,
 		sec_count = REG_GET_FIELD(data, ATC_L2_CACHE_4K_DSM_CNTL,
 					  SEC_COUNT);
 		if (sec_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, SEC %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, SEC %d\n", i,
 				 atc_l2_cache_4k_mems[i], sec_count);
 			err_data->ce_count += sec_count;
 		}
@@ -801,7 +808,8 @@ static int gfx_v9_4_query_utc_edc_status(struct amdgpu_device *adev,
 		ded_count = REG_GET_FIELD(data, ATC_L2_CACHE_4K_DSM_CNTL,
 					  DED_COUNT);
 		if (ded_count) {
-			DRM_INFO("Instance[%d]: SubBlock %s, DED %d\n", i,
+			dev_info(adev->dev,
+				 "Instance[%d]: SubBlock %s, DED %d\n", i,
 				 atc_l2_cache_4k_mems[i], ded_count);
 			err_data->ue_count += ded_count;
 		}
@@ -816,7 +824,8 @@ static int gfx_v9_4_query_utc_edc_status(struct amdgpu_device *adev,
 	return 0;
 }
 
-static int gfx_v9_4_ras_error_count(const struct soc15_reg_entry *reg,
+static int gfx_v9_4_ras_error_count(struct amdgpu_device *adev,
+				    const struct soc15_reg_entry *reg,
 				    uint32_t se_id, uint32_t inst_id,
 				    uint32_t value, uint32_t *sec_count,
 				    uint32_t *ded_count)
@@ -833,7 +842,8 @@ static int gfx_v9_4_ras_error_count(const struct soc15_reg_entry *reg,
 		sec_cnt = (value & gfx_v9_4_ras_fields[i].sec_count_mask) >>
 			  gfx_v9_4_ras_fields[i].sec_count_shift;
 		if (sec_cnt) {
-			DRM_INFO("GFX SubBlock %s, Instance[%d][%d], SEC %d\n",
+			dev_info(adev->dev,
+				 "GFX SubBlock %s, Instance[%d][%d], SEC %d\n",
 				 gfx_v9_4_ras_fields[i].name, se_id, inst_id,
 				 sec_cnt);
 			*sec_count += sec_cnt;
@@ -842,7 +852,8 @@ static int gfx_v9_4_ras_error_count(const struct soc15_reg_entry *reg,
 		ded_cnt = (value & gfx_v9_4_ras_fields[i].ded_count_mask) >>
 			  gfx_v9_4_ras_fields[i].ded_count_shift;
 		if (ded_cnt) {
-			DRM_INFO("GFX SubBlock %s, Instance[%d][%d], DED %d\n",
+			dev_info(adev->dev,
+				 "GFX SubBlock %s, Instance[%d][%d], DED %d\n",
 				 gfx_v9_4_ras_fields[i].name, se_id, inst_id,
 				 ded_cnt);
 			*ded_count += ded_cnt;
@@ -876,7 +887,7 @@ int gfx_v9_4_query_ras_error_count(struct amdgpu_device *adev,
 				reg_value = RREG32(SOC15_REG_ENTRY_OFFSET(
 					gfx_v9_4_edc_counter_regs[i]));
 				if (reg_value)
-					gfx_v9_4_ras_error_count(
+					gfx_v9_4_ras_error_count(adev,
 						&gfx_v9_4_edc_counter_regs[i],
 						j, k, reg_value, &sec_count,
 						&ded_count);
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
index 9775eca6fe43..edaa50d850a6 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
@@ -170,6 +170,9 @@ static int gmc_v10_0_process_interrupt(struct amdgpu_device *adev,
 			dev_err(adev->dev,
 				"GCVM_L2_PROTECTION_FAULT_STATUS:0x%08X\n",
 				status);
+			dev_err(adev->dev, "\t Faulty UTCL2 client ID: 0x%lx\n",
+				REG_GET_FIELD(status,
+				GCVM_L2_PROTECTION_FAULT_STATUS, CID));
 			dev_err(adev->dev, "\t MORE_FAULTS: 0x%lx\n",
 				REG_GET_FIELD(status,
 				GCVM_L2_PROTECTION_FAULT_STATUS, MORE_FAULTS));
@@ -369,7 +372,8 @@ static void gmc_v10_0_flush_gpu_tlb(struct amdgpu_device *adev, uint32_t vmid,
 	 * translation. Avoid this by doing the invalidation from the SDMA
 	 * itself.
 	 */
-	r = amdgpu_job_alloc_with_ib(adev, 16 * 4, &job);
+	r = amdgpu_job_alloc_with_ib(adev, 16 * 4, AMDGPU_IB_POOL_IMMEDIATE,
+				     &job);
 	if (r)
 		goto error_alloc;
 
@@ -423,7 +427,13 @@ static int gmc_v10_0_flush_gpu_tlb_pasid(struct amdgpu_device *adev,
 		amdgpu_ring_alloc(ring, kiq->pmf->invalidate_tlbs_size + 8);
 		kiq->pmf->kiq_invalidate_tlbs(ring,
 					pasid, flush_type, all_hub);
-		amdgpu_fence_emit_polling(ring, &seq);
+		r = amdgpu_fence_emit_polling(ring, &seq, MAX_KIQ_REG_WAIT);
+		if (r) {
+			amdgpu_ring_undo(ring);
+			spin_unlock(&adev->gfx.kiq.ring_lock);
+			return -ETIME;
+		}
+
 		amdgpu_ring_commit(ring);
 		spin_unlock(&adev->gfx.kiq.ring_lock);
 		r = amdgpu_fence_wait_polling(ring, seq, adev->usec_timeout);
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
index b205039350b6..c1a530dbe162 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
@@ -858,7 +858,7 @@ static int gmc_v6_0_sw_init(void *handle)
 
 	r = dma_set_mask_and_coherent(adev->dev, DMA_BIT_MASK(44));
 	if (r) {
-		dev_warn(adev->dev, "amdgpu: No suitable DMA available.\n");
+		dev_warn(adev->dev, "No suitable DMA available.\n");
 		return r;
 	}
 	adev->need_swiotlb = drm_need_swiotlb(44);
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
index 9da9596a3638..e8529e244a2b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
@@ -1019,7 +1019,7 @@ static int gmc_v7_0_sw_init(void *handle)
 
 	r = dma_set_mask_and_coherent(adev->dev, DMA_BIT_MASK(40));
 	if (r) {
-		pr_warn("amdgpu: No suitable DMA available\n");
+		pr_warn("No suitable DMA available\n");
 		return r;
 	}
 	adev->need_swiotlb = drm_need_swiotlb(40);
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
index 27d83204fa2b..0aa5b82808d1 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
@@ -1144,7 +1144,7 @@ static int gmc_v8_0_sw_init(void *handle)
 
 	r = dma_set_mask_and_coherent(adev->dev, DMA_BIT_MASK(40));
 	if (r) {
-		pr_warn("amdgpu: No suitable DMA available\n");
+		pr_warn("No suitable DMA available\n");
 		return r;
 	}
 	adev->need_swiotlb = drm_need_swiotlb(40);
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
index 8606f877478f..055ecba754ff 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
@@ -362,6 +362,9 @@ static int gmc_v9_0_process_interrupt(struct amdgpu_device *adev,
 			dev_err(adev->dev,
 				"VM_L2_PROTECTION_FAULT_STATUS:0x%08X\n",
 				status);
+			dev_err(adev->dev, "\t Faulty UTCL2 client ID: 0x%lx\n",
+				REG_GET_FIELD(status,
+				VM_L2_PROTECTION_FAULT_STATUS, CID));
 			dev_err(adev->dev, "\t MORE_FAULTS: 0x%lx\n",
 				REG_GET_FIELD(status,
 				VM_L2_PROTECTION_FAULT_STATUS, MORE_FAULTS));
@@ -618,7 +621,13 @@ static int gmc_v9_0_flush_gpu_tlb_pasid(struct amdgpu_device *adev,
 						      pasid, 2, all_hub);
 		kiq->pmf->kiq_invalidate_tlbs(ring,
 					pasid, flush_type, all_hub);
-		amdgpu_fence_emit_polling(ring, &seq);
+		r = amdgpu_fence_emit_polling(ring, &seq, MAX_KIQ_REG_WAIT);
+		if (r) {
+			amdgpu_ring_undo(ring);
+			spin_unlock(&adev->gfx.kiq.ring_lock);
+			return -ETIME;
+		}
+
 		amdgpu_ring_commit(ring);
 		spin_unlock(&adev->gfx.kiq.ring_lock);
 		r = amdgpu_fence_wait_polling(ring, seq, adev->usec_timeout);
diff --git a/drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.c b/drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.c
index 0debfd9f428c..b10c95cad9a2 100644
--- a/drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.c
@@ -480,7 +480,8 @@ int jpeg_v1_0_sw_init(void *handle)
 
 	ring = &adev->jpeg.inst->ring_dec;
 	sprintf(ring->name, "jpeg_dec");
-	r = amdgpu_ring_init(adev, ring, 512, &adev->jpeg.inst->irq, 0);
+	r = amdgpu_ring_init(adev, ring, 512, &adev->jpeg.inst->irq,
+			     0, AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		return r;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c b/drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c
index 6173951db7b4..e67d09cb1b03 100644
--- a/drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c
@@ -106,7 +106,8 @@ static int jpeg_v2_0_sw_init(void *handle)
 	ring->use_doorbell = true;
 	ring->doorbell_index = (adev->doorbell_index.vcn.vcn_ring0_1 << 1) + 1;
 	sprintf(ring->name, "jpeg_dec");
-	r = amdgpu_ring_init(adev, ring, 512, &adev->jpeg.inst->irq, 0);
+	r = amdgpu_ring_init(adev, ring, 512, &adev->jpeg.inst->irq,
+			     0, AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		return r;
 
@@ -169,14 +170,11 @@ static int jpeg_v2_0_hw_init(void *handle)
 static int jpeg_v2_0_hw_fini(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	struct amdgpu_ring *ring = &adev->jpeg.inst->ring_dec;
 
 	if (adev->jpeg.cur_state != AMD_PG_STATE_GATE &&
 	      RREG32_SOC15(JPEG, 0, mmUVD_JRBC_STATUS))
 		jpeg_v2_0_set_powergating_state(adev, AMD_PG_STATE_GATE);
 
-	ring->sched.ready = false;
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c b/drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c
index c04c2078a7c1..37df3f2e587a 100644
--- a/drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c
@@ -118,7 +118,8 @@ static int jpeg_v2_5_sw_init(void *handle)
 		ring->use_doorbell = true;
 		ring->doorbell_index = (adev->doorbell_index.vcn.vcn_ring0_1 << 1) + 1 + 8 * i;
 		sprintf(ring->name, "jpeg_dec_%d", i);
-		r = amdgpu_ring_init(adev, ring, 512, &adev->jpeg.inst[i].irq, 0);
+		r = amdgpu_ring_init(adev, ring, 512, &adev->jpeg.inst[i].irq,
+				     0, AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c
old mode 100644
new mode 100755
index 396c2a624de0..bd2d2b8d1f42
--- a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c
@@ -690,7 +690,8 @@ static const struct soc15_reg_entry mmhub_v1_0_edc_cnt_regs[] = {
    { SOC15_REG_ENTRY(MMHUB, 0, mmMMEA1_EDC_CNT2_VG20), 0, 0, 0},
 };
 
-static int mmhub_v1_0_get_ras_error_count(const struct soc15_reg_entry *reg,
+static int mmhub_v1_0_get_ras_error_count(struct amdgpu_device *adev,
+	const struct soc15_reg_entry *reg,
 	uint32_t value, uint32_t *sec_count, uint32_t *ded_count)
 {
 	uint32_t i;
@@ -704,7 +705,8 @@ static int mmhub_v1_0_get_ras_error_count(const struct soc15_reg_entry *reg,
 				mmhub_v1_0_ras_fields[i].sec_count_mask) >>
 				mmhub_v1_0_ras_fields[i].sec_count_shift;
 		if (sec_cnt) {
-			DRM_INFO("MMHUB SubBlock %s, SEC %d\n",
+			dev_info(adev->dev,
+				"MMHUB SubBlock %s, SEC %d\n",
 				mmhub_v1_0_ras_fields[i].name,
 				sec_cnt);
 			*sec_count += sec_cnt;
@@ -714,7 +716,8 @@ static int mmhub_v1_0_get_ras_error_count(const struct soc15_reg_entry *reg,
 				mmhub_v1_0_ras_fields[i].ded_count_mask) >>
 				mmhub_v1_0_ras_fields[i].ded_count_shift;
 		if (ded_cnt) {
-			DRM_INFO("MMHUB SubBlock %s, DED %d\n",
+			dev_info(adev->dev,
+				"MMHUB SubBlock %s, DED %d\n",
 				mmhub_v1_0_ras_fields[i].name,
 				ded_cnt);
 			*ded_count += ded_cnt;
@@ -739,7 +742,8 @@ static void mmhub_v1_0_query_ras_error_count(struct amdgpu_device *adev,
 		reg_value =
 			RREG32(SOC15_REG_ENTRY_OFFSET(mmhub_v1_0_edc_cnt_regs[i]));
 		if (reg_value)
-			mmhub_v1_0_get_ras_error_count(&mmhub_v1_0_edc_cnt_regs[i],
+			mmhub_v1_0_get_ras_error_count(adev,
+				&mmhub_v1_0_edc_cnt_regs[i],
 				reg_value, &sec_count, &ded_count);
 	}
 
diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h
index 37dbe0f2142f..83b453f5d717 100644
--- a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h
+++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h
@@ -26,7 +26,7 @@
 
 #define AI_MAILBOX_POLL_ACK_TIMEDOUT	500
 #define AI_MAILBOX_POLL_MSG_TIMEDOUT	12000
-#define AI_MAILBOX_POLL_FLR_TIMEDOUT	500
+#define AI_MAILBOX_POLL_FLR_TIMEDOUT	5000
 
 enum idh_request {
 	IDH_REQ_GPU_INIT_ACCESS = 1,
@@ -46,7 +46,8 @@ enum idh_event {
 	IDH_SUCCESS,
 	IDH_FAIL,
 	IDH_QUERY_ALIVE,
-	IDH_EVENT_MAX
+
+	IDH_TEXT_MESSAGE = 255,
 };
 
 extern const struct amdgpu_virt_ops xgpu_ai_virt_ops;
diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c b/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c
index 237fa5e16b7c..ce2bf1fb79ed 100644
--- a/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c
+++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c
@@ -30,7 +30,6 @@
 #include "navi10_ih.h"
 #include "soc15_common.h"
 #include "mxgpu_nv.h"
-#include "mxgpu_ai.h"
 
 static void xgpu_nv_mailbox_send_ack(struct amdgpu_device *adev)
 {
@@ -53,8 +52,7 @@ static void xgpu_nv_mailbox_set_valid(struct amdgpu_device *adev, bool val)
  */
 static enum idh_event xgpu_nv_mailbox_peek_msg(struct amdgpu_device *adev)
 {
-	return RREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0,
-				mmBIF_BX_PF_MAILBOX_MSGBUF_RCV_DW0));
+	return RREG32_NO_KIQ(mmMAILBOX_MSGBUF_RCV_DW0);
 }
 
 
@@ -63,8 +61,7 @@ static int xgpu_nv_mailbox_rcv_msg(struct amdgpu_device *adev,
 {
 	u32 reg;
 
-	reg = RREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0,
-					     mmBIF_BX_PF_MAILBOX_MSGBUF_RCV_DW0));
+	reg = RREG32_NO_KIQ(mmMAILBOX_MSGBUF_RCV_DW0);
 	if (reg != event)
 		return -ENOENT;
 
@@ -110,7 +107,6 @@ static int xgpu_nv_poll_msg(struct amdgpu_device *adev, enum idh_event event)
 		timeout -= 10;
 	} while (timeout > 1);
 
-	pr_err("Doesn't get msg:%d from pf, error=%d\n", event, r);
 
 	return -ETIME;
 }
@@ -118,7 +114,6 @@ static int xgpu_nv_poll_msg(struct amdgpu_device *adev, enum idh_event event)
 static void xgpu_nv_mailbox_trans_msg (struct amdgpu_device *adev,
 	      enum idh_request req, u32 data1, u32 data2, u32 data3)
 {
-	u32 reg;
 	int r;
 	uint8_t trn;
 
@@ -137,19 +132,10 @@ static void xgpu_nv_mailbox_trans_msg (struct amdgpu_device *adev,
 		}
 	} while (trn);
 
-	reg = RREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0,
-					     mmBIF_BX_PF_MAILBOX_MSGBUF_TRN_DW0));
-	reg = REG_SET_FIELD(reg, BIF_BX_PF_MAILBOX_MSGBUF_TRN_DW0,
-			    MSGBUF_DATA, req);
-	WREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_MSGBUF_TRN_DW0),
-		      reg);
-	WREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_MSGBUF_TRN_DW1),
-				data1);
-	WREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_MSGBUF_TRN_DW2),
-				data2);
-	WREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_MSGBUF_TRN_DW3),
-				data3);
-
+	WREG32_NO_KIQ(mmMAILBOX_MSGBUF_TRN_DW0, req);
+	WREG32_NO_KIQ(mmMAILBOX_MSGBUF_TRN_DW1, data1);
+	WREG32_NO_KIQ(mmMAILBOX_MSGBUF_TRN_DW2, data2);
+	WREG32_NO_KIQ(mmMAILBOX_MSGBUF_TRN_DW3, data3);
 	xgpu_nv_mailbox_set_valid(adev, true);
 
 	/* start to poll ack */
@@ -164,23 +150,48 @@ static int xgpu_nv_send_access_requests(struct amdgpu_device *adev,
 					enum idh_request req)
 {
 	int r;
+	enum idh_event event = -1;
 
 	xgpu_nv_mailbox_trans_msg(adev, req, 0, 0, 0);
 
-	/* start to check msg if request is idh_req_gpu_init_access */
-	if (req == IDH_REQ_GPU_INIT_ACCESS ||
-		req == IDH_REQ_GPU_FINI_ACCESS ||
-		req == IDH_REQ_GPU_RESET_ACCESS) {
-		r = xgpu_nv_poll_msg(adev, IDH_READY_TO_ACCESS_GPU);
+	switch (req) {
+	case IDH_REQ_GPU_INIT_ACCESS:
+	case IDH_REQ_GPU_FINI_ACCESS:
+	case IDH_REQ_GPU_RESET_ACCESS:
+		event = IDH_READY_TO_ACCESS_GPU;
+		break;
+	case IDH_REQ_GPU_INIT_DATA:
+		event = IDH_REQ_GPU_INIT_DATA_READY;
+		break;
+	default:
+		break;
+	}
+
+	if (event != -1) {
+		r = xgpu_nv_poll_msg(adev, event);
 		if (r) {
-			pr_err("Doesn't get READY_TO_ACCESS_GPU from pf, give up\n");
-			return r;
+			if (req != IDH_REQ_GPU_INIT_DATA) {
+				pr_err("Doesn't get msg:%d from pf, error=%d\n", event, r);
+				return r;
+			}
+			else /* host doesn't support REQ_GPU_INIT_DATA handshake */
+				adev->virt.req_init_data_ver = 0;
+		} else {
+			if (req == IDH_REQ_GPU_INIT_DATA)
+			{
+				adev->virt.req_init_data_ver =
+					RREG32_NO_KIQ(mmMAILBOX_MSGBUF_RCV_DW1);
+
+				/* assume V1 in case host doesn't set version number */
+				if (adev->virt.req_init_data_ver < 1)
+					adev->virt.req_init_data_ver = 1;
+			}
 		}
+
 		/* Retrieve checksum from mailbox2 */
 		if (req == IDH_REQ_GPU_INIT_ACCESS || req == IDH_REQ_GPU_RESET_ACCESS) {
 			adev->virt.fw_reserve.checksum_key =
-				RREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0,
-					mmBIF_BX_PF_MAILBOX_MSGBUF_RCV_DW2));
+				RREG32_NO_KIQ(mmMAILBOX_MSGBUF_RCV_DW2);
 		}
 	}
 
@@ -213,6 +224,11 @@ static int xgpu_nv_release_full_gpu_access(struct amdgpu_device *adev,
 	return r;
 }
 
+static int xgpu_nv_request_init_data(struct amdgpu_device *adev)
+{
+	return xgpu_nv_send_access_requests(adev, IDH_REQ_GPU_INIT_DATA);
+}
+
 static int xgpu_nv_mailbox_ack_irq(struct amdgpu_device *adev,
 					struct amdgpu_irq_src *source,
 					struct amdgpu_iv_entry *entry)
@@ -226,11 +242,14 @@ static int xgpu_nv_set_mailbox_ack_irq(struct amdgpu_device *adev,
 					unsigned type,
 					enum amdgpu_interrupt_state state)
 {
-	u32 tmp = RREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_INT_CNTL));
+	u32 tmp = RREG32_NO_KIQ(mmMAILBOX_INT_CNTL);
+
+	if (state == AMDGPU_IRQ_STATE_ENABLE)
+		tmp |= 2;
+	else
+		tmp &= ~2;
 
-	tmp = REG_SET_FIELD(tmp, BIF_BX_PF_MAILBOX_INT_CNTL, ACK_INT_EN,
-				(state == AMDGPU_IRQ_STATE_ENABLE) ? 1 : 0);
-	WREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_INT_CNTL), tmp);
+	WREG32_NO_KIQ(mmMAILBOX_INT_CNTL, tmp);
 
 	return 0;
 }
@@ -282,11 +301,14 @@ static int xgpu_nv_set_mailbox_rcv_irq(struct amdgpu_device *adev,
 				       unsigned type,
 				       enum amdgpu_interrupt_state state)
 {
-	u32 tmp = RREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_INT_CNTL));
+	u32 tmp = RREG32_NO_KIQ(mmMAILBOX_INT_CNTL);
+
+	if (state == AMDGPU_IRQ_STATE_ENABLE)
+		tmp |= 1;
+	else
+		tmp &= ~1;
 
-	tmp = REG_SET_FIELD(tmp, BIF_BX_PF_MAILBOX_INT_CNTL, VALID_INT_EN,
-			    (state == AMDGPU_IRQ_STATE_ENABLE) ? 1 : 0);
-	WREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_INT_CNTL), tmp);
+	WREG32_NO_KIQ(mmMAILBOX_INT_CNTL, tmp);
 
 	return 0;
 }
@@ -378,6 +400,7 @@ void xgpu_nv_mailbox_put_irq(struct amdgpu_device *adev)
 const struct amdgpu_virt_ops xgpu_nv_virt_ops = {
 	.req_full_gpu	= xgpu_nv_request_full_gpu_access,
 	.rel_full_gpu	= xgpu_nv_release_full_gpu_access,
+	.req_init_data  = xgpu_nv_request_init_data,
 	.reset_gpu = xgpu_nv_request_reset,
 	.wait_reset = NULL,
 	.trans_msg = xgpu_nv_mailbox_trans_msg,
diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.h b/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.h
index 99b15f6865cb..52605e14a1a5 100644
--- a/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.h
+++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_nv.h
@@ -25,8 +25,32 @@
 #define __MXGPU_NV_H__
 
 #define NV_MAILBOX_POLL_ACK_TIMEDOUT	500
-#define NV_MAILBOX_POLL_MSG_TIMEDOUT	12000
-#define NV_MAILBOX_POLL_FLR_TIMEDOUT	500
+#define NV_MAILBOX_POLL_MSG_TIMEDOUT	6000
+#define NV_MAILBOX_POLL_FLR_TIMEDOUT	5000
+
+enum idh_request {
+	IDH_REQ_GPU_INIT_ACCESS = 1,
+	IDH_REL_GPU_INIT_ACCESS,
+	IDH_REQ_GPU_FINI_ACCESS,
+	IDH_REL_GPU_FINI_ACCESS,
+	IDH_REQ_GPU_RESET_ACCESS,
+	IDH_REQ_GPU_INIT_DATA,
+
+	IDH_LOG_VF_ERROR       = 200,
+};
+
+enum idh_event {
+	IDH_CLR_MSG_BUF	= 0,
+	IDH_READY_TO_ACCESS_GPU,
+	IDH_FLR_NOTIFICATION,
+	IDH_FLR_NOTIFICATION_CMPL,
+	IDH_SUCCESS,
+	IDH_FAIL,
+	IDH_QUERY_ALIVE,
+	IDH_REQ_GPU_INIT_DATA_READY,
+
+	IDH_TEXT_MESSAGE = 255,
+};
 
 extern const struct amdgpu_virt_ops xgpu_nv_virt_ops;
 
@@ -35,7 +59,21 @@ int xgpu_nv_mailbox_add_irq_id(struct amdgpu_device *adev);
 int xgpu_nv_mailbox_get_irq(struct amdgpu_device *adev);
 void xgpu_nv_mailbox_put_irq(struct amdgpu_device *adev);
 
-#define NV_MAIBOX_CONTROL_TRN_OFFSET_BYTE (SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_CONTROL) * 4)
-#define NV_MAIBOX_CONTROL_RCV_OFFSET_BYTE (SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF_MAILBOX_CONTROL) * 4 + 1)
+#define mmMAILBOX_CONTROL 0xE5E
+
+#define NV_MAIBOX_CONTROL_TRN_OFFSET_BYTE (mmMAILBOX_CONTROL * 4)
+#define NV_MAIBOX_CONTROL_RCV_OFFSET_BYTE (NV_MAIBOX_CONTROL_TRN_OFFSET_BYTE + 1)
+
+#define mmMAILBOX_MSGBUF_TRN_DW0 0xE56
+#define mmMAILBOX_MSGBUF_TRN_DW1 0xE57
+#define mmMAILBOX_MSGBUF_TRN_DW2 0xE58
+#define mmMAILBOX_MSGBUF_TRN_DW3 0xE59
+
+#define mmMAILBOX_MSGBUF_RCV_DW0 0xE5A
+#define mmMAILBOX_MSGBUF_RCV_DW1 0xE5B
+#define mmMAILBOX_MSGBUF_RCV_DW2 0xE5C
+#define mmMAILBOX_MSGBUF_RCV_DW3 0xE5D
+
+#define mmMAILBOX_INT_CNTL 0xE5F
 
 #endif
diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_vi.h b/drivers/gpu/drm/amd/amdgpu/mxgpu_vi.h
index f13dc6cc158f..713ee66a4d3e 100644
--- a/drivers/gpu/drm/amd/amdgpu/mxgpu_vi.h
+++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_vi.h
@@ -43,7 +43,8 @@ enum idh_event {
 	IDH_READY_TO_ACCESS_GPU,
 	IDH_FLR_NOTIFICATION,
 	IDH_FLR_NOTIFICATION_CMPL,
-	IDH_EVENT_MAX
+
+	IDH_TEXT_MESSAGE = 255
 };
 
 extern const struct amdgpu_virt_ops xgpu_vi_virt_ops;
diff --git a/drivers/gpu/drm/amd/amdgpu/navi10_ih.c b/drivers/gpu/drm/amd/amdgpu/navi10_ih.c
index e08245a446fc..f97857ed3c7e 100644
--- a/drivers/gpu/drm/amd/amdgpu/navi10_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/navi10_ih.c
@@ -49,8 +49,48 @@ static void navi10_ih_enable_interrupts(struct amdgpu_device *adev)
 
 	ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL, RB_ENABLE, 1);
 	ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL, ENABLE_INTR, 1);
-	WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL, ih_rb_cntl);
+	if (amdgpu_sriov_vf(adev) && adev->asic_type < CHIP_NAVI10) {
+		if (psp_reg_program(&adev->psp, PSP_REG_IH_RB_CNTL, ih_rb_cntl)) {
+			DRM_ERROR("PSP program IH_RB_CNTL failed!\n");
+			return;
+		}
+	} else {
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL, ih_rb_cntl);
+	}
+
 	adev->irq.ih.enabled = true;
+
+	if (adev->irq.ih1.ring_size) {
+		ih_rb_cntl = RREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING1);
+		ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL_RING1,
+					   RB_ENABLE, 1);
+		if (amdgpu_sriov_vf(adev) && adev->asic_type < CHIP_NAVI10) {
+			if (psp_reg_program(&adev->psp, PSP_REG_IH_RB_CNTL_RING1,
+						ih_rb_cntl)) {
+				DRM_ERROR("program IH_RB_CNTL_RING1 failed!\n");
+				return;
+			}
+		} else {
+			WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING1, ih_rb_cntl);
+		}
+		adev->irq.ih1.enabled = true;
+	}
+
+	if (adev->irq.ih2.ring_size) {
+		ih_rb_cntl = RREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING2);
+		ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL_RING2,
+					   RB_ENABLE, 1);
+		if (amdgpu_sriov_vf(adev) && adev->asic_type < CHIP_NAVI10) {
+			if (psp_reg_program(&adev->psp, PSP_REG_IH_RB_CNTL_RING2,
+						ih_rb_cntl)) {
+				DRM_ERROR("program IH_RB_CNTL_RING2 failed!\n");
+				return;
+			}
+		} else {
+			WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING2, ih_rb_cntl);
+		}
+		adev->irq.ih2.enabled = true;
+	}
 }
 
 /**
@@ -66,12 +106,61 @@ static void navi10_ih_disable_interrupts(struct amdgpu_device *adev)
 
 	ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL, RB_ENABLE, 0);
 	ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL, ENABLE_INTR, 0);
-	WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL, ih_rb_cntl);
+	if (amdgpu_sriov_vf(adev) && adev->asic_type < CHIP_NAVI10) {
+		if (psp_reg_program(&adev->psp, PSP_REG_IH_RB_CNTL, ih_rb_cntl)) {
+			DRM_ERROR("PSP program IH_RB_CNTL failed!\n");
+			return;
+		}
+	} else {
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL, ih_rb_cntl);
+	}
+
 	/* set rptr, wptr to 0 */
 	WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR, 0);
 	WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR, 0);
 	adev->irq.ih.enabled = false;
 	adev->irq.ih.rptr = 0;
+
+	if (adev->irq.ih1.ring_size) {
+		ih_rb_cntl = RREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING1);
+		ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL_RING1,
+					   RB_ENABLE, 0);
+		if (amdgpu_sriov_vf(adev) && adev->asic_type < CHIP_NAVI10) {
+			if (psp_reg_program(&adev->psp, PSP_REG_IH_RB_CNTL_RING1,
+						ih_rb_cntl)) {
+				DRM_ERROR("program IH_RB_CNTL_RING1 failed!\n");
+				return;
+			}
+		} else {
+			WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING1, ih_rb_cntl);
+		}
+		/* set rptr, wptr to 0 */
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR_RING1, 0);
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_RING1, 0);
+		adev->irq.ih1.enabled = false;
+		adev->irq.ih1.rptr = 0;
+	}
+
+	if (adev->irq.ih2.ring_size) {
+		ih_rb_cntl = RREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING2);
+		ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL_RING2,
+					   RB_ENABLE, 0);
+		if (amdgpu_sriov_vf(adev) && adev->asic_type < CHIP_NAVI10) {
+			if (psp_reg_program(&adev->psp, PSP_REG_IH_RB_CNTL_RING2,
+						ih_rb_cntl)) {
+				DRM_ERROR("program IH_RB_CNTL_RING2 failed!\n");
+				return;
+			}
+		} else {
+			WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING2, ih_rb_cntl);
+		}
+		/* set rptr, wptr to 0 */
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR_RING2, 0);
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_RING2, 0);
+		adev->irq.ih2.enabled = false;
+		adev->irq.ih2.rptr = 0;
+	}
+
 }
 
 static uint32_t navi10_ih_rb_cntl(struct amdgpu_ih_ring *ih, uint32_t ih_rb_cntl)
@@ -97,6 +186,43 @@ static uint32_t navi10_ih_rb_cntl(struct amdgpu_ih_ring *ih, uint32_t ih_rb_cntl
 	return ih_rb_cntl;
 }
 
+static uint32_t navi10_ih_doorbell_rptr(struct amdgpu_ih_ring *ih)
+{
+	u32 ih_doorbell_rtpr = 0;
+
+	if (ih->use_doorbell) {
+		ih_doorbell_rtpr = REG_SET_FIELD(ih_doorbell_rtpr,
+						 IH_DOORBELL_RPTR, OFFSET,
+						 ih->doorbell_index);
+		ih_doorbell_rtpr = REG_SET_FIELD(ih_doorbell_rtpr,
+						 IH_DOORBELL_RPTR,
+						 ENABLE, 1);
+	} else {
+		ih_doorbell_rtpr = REG_SET_FIELD(ih_doorbell_rtpr,
+						 IH_DOORBELL_RPTR,
+						 ENABLE, 0);
+	}
+	return ih_doorbell_rtpr;
+}
+
+static void navi10_ih_reroute_ih(struct amdgpu_device *adev)
+{
+	uint32_t tmp;
+
+	/* Reroute to IH ring 1 for VMC */
+	WREG32_SOC15(OSSSYS, 0, mmIH_CLIENT_CFG_INDEX, 0x12);
+	tmp = RREG32_SOC15(OSSSYS, 0, mmIH_CLIENT_CFG_DATA);
+	tmp = REG_SET_FIELD(tmp, IH_CLIENT_CFG_DATA, CLIENT_TYPE, 1);
+	tmp = REG_SET_FIELD(tmp, IH_CLIENT_CFG_DATA, RING_ID, 1);
+	WREG32_SOC15(OSSSYS, 0, mmIH_CLIENT_CFG_DATA, tmp);
+
+	/* Reroute IH ring 1 for UMC */
+	WREG32_SOC15(OSSSYS, 0, mmIH_CLIENT_CFG_INDEX, 0x1B);
+	tmp = RREG32_SOC15(OSSSYS, 0, mmIH_CLIENT_CFG_DATA);
+	tmp = REG_SET_FIELD(tmp, IH_CLIENT_CFG_DATA, RING_ID, 1);
+	WREG32_SOC15(OSSSYS, 0, mmIH_CLIENT_CFG_DATA, tmp);
+}
+
 /**
  * navi10_ih_irq_init - init and enable the interrupt ring
  *
@@ -111,7 +237,7 @@ static uint32_t navi10_ih_rb_cntl(struct amdgpu_ih_ring *ih, uint32_t ih_rb_cntl
 static int navi10_ih_irq_init(struct amdgpu_device *adev)
 {
 	struct amdgpu_ih_ring *ih = &adev->irq.ih;
-	u32 ih_rb_cntl, ih_doorbell_rtpr, ih_chicken;
+	u32 ih_rb_cntl, ih_chicken;
 	u32 tmp;
 
 	/* disable irqs */
@@ -127,6 +253,15 @@ static int navi10_ih_irq_init(struct amdgpu_device *adev)
 	ih_rb_cntl = navi10_ih_rb_cntl(ih, ih_rb_cntl);
 	ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL, RPTR_REARM,
 				   !!adev->irq.msi_enabled);
+	if (amdgpu_sriov_vf(adev) && adev->asic_type < CHIP_NAVI10) {
+		if (psp_reg_program(&adev->psp, PSP_REG_IH_RB_CNTL, ih_rb_cntl)) {
+			DRM_ERROR("PSP program IH_RB_CNTL failed!\n");
+			return -ETIMEDOUT;
+		}
+	} else {
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL, ih_rb_cntl);
+	}
+	navi10_ih_reroute_ih(adev);
 
 	if (unlikely(adev->firmware.load_type == AMDGPU_FW_LOAD_DIRECT)) {
 		if (ih->use_bus_addr) {
@@ -137,8 +272,6 @@ static int navi10_ih_irq_init(struct amdgpu_device *adev)
 		}
 	}
 
-	WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL, ih_rb_cntl);
-
 	/* set the writeback address whether it's enabled or not */
 	WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_ADDR_LO,
 		     lower_32_bits(ih->wptr_addr));
@@ -149,22 +282,68 @@ static int navi10_ih_irq_init(struct amdgpu_device *adev)
 	WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR, 0);
 	WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR, 0);
 
-	ih_doorbell_rtpr = RREG32_SOC15(OSSSYS, 0, mmIH_DOORBELL_RPTR);
-	if (ih->use_doorbell) {
-		ih_doorbell_rtpr = REG_SET_FIELD(ih_doorbell_rtpr,
-						 IH_DOORBELL_RPTR, OFFSET,
-						 ih->doorbell_index);
-		ih_doorbell_rtpr = REG_SET_FIELD(ih_doorbell_rtpr,
-						 IH_DOORBELL_RPTR, ENABLE, 1);
-	} else {
-		ih_doorbell_rtpr = REG_SET_FIELD(ih_doorbell_rtpr,
-						 IH_DOORBELL_RPTR, ENABLE, 0);
-	}
-	WREG32_SOC15(OSSSYS, 0, mmIH_DOORBELL_RPTR, ih_doorbell_rtpr);
+	WREG32_SOC15(OSSSYS, 0, mmIH_DOORBELL_RPTR,
+			navi10_ih_doorbell_rptr(ih));
 
 	adev->nbio.funcs->ih_doorbell_range(adev, ih->use_doorbell,
 					    ih->doorbell_index);
 
+	ih = &adev->irq.ih1;
+	if (ih->ring_size) {
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_BASE_RING1, ih->gpu_addr >> 8);
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_BASE_HI_RING1,
+			     (ih->gpu_addr >> 40) & 0xff);
+
+		ih_rb_cntl = RREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING1);
+		ih_rb_cntl = navi10_ih_rb_cntl(ih, ih_rb_cntl);
+		ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL,
+					   WPTR_OVERFLOW_ENABLE, 0);
+		ih_rb_cntl = REG_SET_FIELD(ih_rb_cntl, IH_RB_CNTL,
+					   RB_FULL_DRAIN_ENABLE, 1);
+		if (amdgpu_sriov_vf(adev) && adev->asic_type < CHIP_NAVI10) {
+			if (psp_reg_program(&adev->psp, PSP_REG_IH_RB_CNTL_RING1,
+						ih_rb_cntl)) {
+				DRM_ERROR("program IH_RB_CNTL_RING1 failed!\n");
+				return -ETIMEDOUT;
+			}
+		} else {
+			WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING1, ih_rb_cntl);
+		}
+		/* set rptr, wptr to 0 */
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_RING1, 0);
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR_RING1, 0);
+
+		WREG32_SOC15(OSSSYS, 0, mmIH_DOORBELL_RPTR_RING1,
+				navi10_ih_doorbell_rptr(ih));
+	}
+
+	ih = &adev->irq.ih2;
+	if (ih->ring_size) {
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_BASE_RING2, ih->gpu_addr >> 8);
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_BASE_HI_RING2,
+			     (ih->gpu_addr >> 40) & 0xff);
+
+		ih_rb_cntl = RREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING2);
+		ih_rb_cntl = navi10_ih_rb_cntl(ih, ih_rb_cntl);
+
+		if (amdgpu_sriov_vf(adev) && adev->asic_type < CHIP_NAVI10) {
+			if (psp_reg_program(&adev->psp, PSP_REG_IH_RB_CNTL_RING2,
+						ih_rb_cntl)) {
+				DRM_ERROR("program IH_RB_CNTL_RING2 failed!\n");
+				return -ETIMEDOUT;
+			}
+		} else {
+			WREG32_SOC15(OSSSYS, 0, mmIH_RB_CNTL_RING2, ih_rb_cntl);
+		}
+		/* set rptr, wptr to 0 */
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_RING2, 0);
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR_RING2, 0);
+
+		WREG32_SOC15(OSSSYS, 0, mmIH_DOORBELL_RPTR_RING2,
+			     navi10_ih_doorbell_rptr(ih));
+	}
+
+
 	tmp = RREG32_SOC15(OSSSYS, 0, mmIH_STORM_CLIENT_LIST_CNTL);
 	tmp = REG_SET_FIELD(tmp, IH_STORM_CLIENT_LIST_CNTL,
 			    CLIENT18_IS_STORM_CLIENT, 1);
@@ -217,7 +396,15 @@ static u32 navi10_ih_get_wptr(struct amdgpu_device *adev,
 	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
 		goto out;
 
-	reg = SOC15_REG_OFFSET(OSSSYS, 0, mmIH_RB_WPTR);
+	if (ih == &adev->irq.ih)
+		reg = SOC15_REG_OFFSET(OSSSYS, 0, mmIH_RB_WPTR);
+	else if (ih == &adev->irq.ih1)
+		reg = SOC15_REG_OFFSET(OSSSYS, 0, mmIH_RB_WPTR_RING1);
+	else if (ih == &adev->irq.ih2)
+		reg = SOC15_REG_OFFSET(OSSSYS, 0, mmIH_RB_WPTR_RING2);
+	else
+		BUG();
+
 	wptr = RREG32_NO_KIQ(reg);
 	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
 		goto out;
@@ -233,7 +420,15 @@ static u32 navi10_ih_get_wptr(struct amdgpu_device *adev,
 		 wptr, ih->rptr, tmp);
 	ih->rptr = tmp;
 
-	reg = SOC15_REG_OFFSET(OSSSYS, 0, mmIH_RB_CNTL);
+	if (ih == &adev->irq.ih)
+		reg = SOC15_REG_OFFSET(OSSSYS, 0, mmIH_RB_CNTL);
+	else if (ih == &adev->irq.ih1)
+		reg = SOC15_REG_OFFSET(OSSSYS, 0, mmIH_RB_CNTL_RING1);
+	else if (ih == &adev->irq.ih2)
+		reg = SOC15_REG_OFFSET(OSSSYS, 0, mmIH_RB_CNTL_RING2);
+	else
+		BUG();
+
 	tmp = RREG32_NO_KIQ(reg);
 	tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
 	WREG32_NO_KIQ(reg, tmp);
@@ -333,8 +528,52 @@ static void navi10_ih_set_rptr(struct amdgpu_device *adev,
 
 		if (amdgpu_sriov_vf(adev))
 			navi10_ih_irq_rearm(adev, ih);
-	} else
+	} else if (ih == &adev->irq.ih) {
 		WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR, ih->rptr);
+	} else if (ih == &adev->irq.ih1) {
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR_RING1, ih->rptr);
+	} else if (ih == &adev->irq.ih2) {
+		WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR_RING2, ih->rptr);
+	}
+}
+
+/**
+ * navi10_ih_self_irq - dispatch work for ring 1 and 2
+ *
+ * @adev: amdgpu_device pointer
+ * @source: irq source
+ * @entry: IV with WPTR update
+ *
+ * Update the WPTR from the IV and schedule work to handle the entries.
+ */
+static int navi10_ih_self_irq(struct amdgpu_device *adev,
+			      struct amdgpu_irq_src *source,
+			      struct amdgpu_iv_entry *entry)
+{
+	uint32_t wptr = cpu_to_le32(entry->src_data[0]);
+
+	switch (entry->ring_id) {
+	case 1:
+		*adev->irq.ih1.wptr_cpu = wptr;
+		schedule_work(&adev->irq.ih1_work);
+		break;
+	case 2:
+		*adev->irq.ih2.wptr_cpu = wptr;
+		schedule_work(&adev->irq.ih2_work);
+		break;
+	default: break;
+	}
+	return 0;
+}
+
+static const struct amdgpu_irq_src_funcs navi10_ih_self_irq_funcs = {
+	.process = navi10_ih_self_irq,
+};
+
+static void navi10_ih_set_self_irq_funcs(struct amdgpu_device *adev)
+{
+	adev->irq.self_irq.num_types = 0;
+	adev->irq.self_irq.funcs = &navi10_ih_self_irq_funcs;
 }
 
 static int navi10_ih_early_init(void *handle)
@@ -342,6 +581,7 @@ static int navi10_ih_early_init(void *handle)
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
 	navi10_ih_set_interrupt_funcs(adev);
+	navi10_ih_set_self_irq_funcs(adev);
 	return 0;
 }
 
@@ -351,6 +591,12 @@ static int navi10_ih_sw_init(void *handle)
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 	bool use_bus_addr;
 
+	r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_IH, 0,
+				&adev->irq.self_irq);
+
+	if (r)
+		return r;
+
 	/* use gpu virtual address for ih ring
 	 * until ih_checken is programmed to allow
 	 * use bus address for ih ring by psp bl */
@@ -363,6 +609,20 @@ static int navi10_ih_sw_init(void *handle)
 	adev->irq.ih.use_doorbell = true;
 	adev->irq.ih.doorbell_index = adev->doorbell_index.ih << 1;
 
+	r = amdgpu_ih_ring_init(adev, &adev->irq.ih1, PAGE_SIZE, true);
+	if (r)
+		return r;
+
+	adev->irq.ih1.use_doorbell = true;
+	adev->irq.ih1.doorbell_index = (adev->doorbell_index.ih + 1) << 1;
+
+	r = amdgpu_ih_ring_init(adev, &adev->irq.ih2, PAGE_SIZE, true);
+	if (r)
+		return r;
+
+	adev->irq.ih2.use_doorbell = true;
+	adev->irq.ih2.doorbell_index = (adev->doorbell_index.ih + 2) << 1;
+
 	r = amdgpu_irq_init(adev);
 
 	return r;
@@ -373,6 +633,8 @@ static int navi10_ih_sw_fini(void *handle)
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
 	amdgpu_irq_fini(adev);
+	amdgpu_ih_ring_fini(adev, &adev->irq.ih2);
+	amdgpu_ih_ring_fini(adev, &adev->irq.ih1);
 	amdgpu_ih_ring_fini(adev, &adev->irq.ih);
 
 	return 0;
diff --git a/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h b/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
index 074a9a09c0a7..a5b60c9a2418 100644
--- a/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
+++ b/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
@@ -73,6 +73,22 @@
 #define SDMA_OP_AQL_COPY  0
 #define SDMA_OP_AQL_BARRIER_OR  0
 
+#define SDMA_GCR_RANGE_IS_PA		(1 << 18)
+#define SDMA_GCR_SEQ(x)			(((x) & 0x3) << 16)
+#define SDMA_GCR_GL2_WB			(1 << 15)
+#define SDMA_GCR_GL2_INV		(1 << 14)
+#define SDMA_GCR_GL2_DISCARD		(1 << 13)
+#define SDMA_GCR_GL2_RANGE(x)		(((x) & 0x3) << 11)
+#define SDMA_GCR_GL2_US			(1 << 10)
+#define SDMA_GCR_GL1_INV		(1 << 9)
+#define SDMA_GCR_GLV_INV		(1 << 8)
+#define SDMA_GCR_GLK_INV		(1 << 7)
+#define SDMA_GCR_GLK_WB			(1 << 6)
+#define SDMA_GCR_GLM_INV		(1 << 5)
+#define SDMA_GCR_GLM_WB			(1 << 4)
+#define SDMA_GCR_GL1_RANGE(x)		(((x) & 0x3) << 2)
+#define SDMA_GCR_GLI_INV(x)		(((x) & 0x3) << 0)
+
 /*define for op field*/
 #define SDMA_PKT_HEADER_op_offset 0
 #define SDMA_PKT_HEADER_op_mask   0x000000FF
diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v2_3.c b/drivers/gpu/drm/amd/amdgpu/nbio_v2_3.c
index f3a3fe746222..cbcf04578b99 100644
--- a/drivers/gpu/drm/amd/amdgpu/nbio_v2_3.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v2_3.c
@@ -290,23 +290,6 @@ const struct nbio_hdp_flush_reg nbio_v2_3_hdp_flush_reg = {
 	.ref_and_mask_sdma1 = BIF_BX_PF_GPU_HDP_FLUSH_DONE__SDMA1_MASK,
 };
 
-static void nbio_v2_3_detect_hw_virt(struct amdgpu_device *adev)
-{
-	uint32_t reg;
-
-	reg = RREG32_SOC15(NBIO, 0, mmRCC_DEV0_EPF0_RCC_IOV_FUNC_IDENTIFIER);
-	if (reg & 1)
-		adev->virt.caps |= AMDGPU_SRIOV_CAPS_IS_VF;
-
-	if (reg & 0x80000000)
-		adev->virt.caps |= AMDGPU_SRIOV_CAPS_ENABLE_IOV;
-
-	if (!reg) {
-		if (is_virtual_machine())	/* passthrough mode exclus sriov mod */
-			adev->virt.caps |= AMDGPU_PASSTHROUGH_MODE;
-	}
-}
-
 static void nbio_v2_3_init_registers(struct amdgpu_device *adev)
 {
 	uint32_t def, data;
@@ -338,6 +321,5 @@ const struct amdgpu_nbio_funcs nbio_v2_3_funcs = {
 	.get_clockgating_state = nbio_v2_3_get_clockgating_state,
 	.ih_control = nbio_v2_3_ih_control,
 	.init_registers = nbio_v2_3_init_registers,
-	.detect_hw_virt = nbio_v2_3_detect_hw_virt,
 	.remap_hdp_registers = nbio_v2_3_remap_hdp_registers,
 };
diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v6_1.c b/drivers/gpu/drm/amd/amdgpu/nbio_v6_1.c
index 635d9e1fc0a3..7b2fb050407d 100644
--- a/drivers/gpu/drm/amd/amdgpu/nbio_v6_1.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v6_1.c
@@ -241,23 +241,6 @@ const struct nbio_hdp_flush_reg nbio_v6_1_hdp_flush_reg = {
 	.ref_and_mask_sdma1 = BIF_BX_PF0_GPU_HDP_FLUSH_DONE__SDMA1_MASK
 };
 
-static void nbio_v6_1_detect_hw_virt(struct amdgpu_device *adev)
-{
-	uint32_t reg;
-
-	reg = RREG32_SOC15(NBIO, 0, mmRCC_PF_0_0_RCC_IOV_FUNC_IDENTIFIER);
-	if (reg & 1)
-		adev->virt.caps |= AMDGPU_SRIOV_CAPS_IS_VF;
-
-	if (reg & 0x80000000)
-		adev->virt.caps |= AMDGPU_SRIOV_CAPS_ENABLE_IOV;
-
-	if (!reg) {
-		if (is_virtual_machine())	/* passthrough mode exclus sriov mod */
-			adev->virt.caps |= AMDGPU_PASSTHROUGH_MODE;
-	}
-}
-
 static void nbio_v6_1_init_registers(struct amdgpu_device *adev)
 {
 	uint32_t def, data;
@@ -294,5 +277,4 @@ const struct amdgpu_nbio_funcs nbio_v6_1_funcs = {
 	.get_clockgating_state = nbio_v6_1_get_clockgating_state,
 	.ih_control = nbio_v6_1_ih_control,
 	.init_registers = nbio_v6_1_init_registers,
-	.detect_hw_virt = nbio_v6_1_detect_hw_virt,
 };
diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_0.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_0.c
index d6cbf26074bc..d34628e113fc 100644
--- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_0.c
@@ -280,12 +280,6 @@ const struct nbio_hdp_flush_reg nbio_v7_0_hdp_flush_reg = {
 	.ref_and_mask_sdma1 = GPU_HDP_FLUSH_DONE__SDMA1_MASK,
 };
 
-static void nbio_v7_0_detect_hw_virt(struct amdgpu_device *adev)
-{
-	if (is_virtual_machine())	/* passthrough mode exclus sriov mod */
-		adev->virt.caps |= AMDGPU_PASSTHROUGH_MODE;
-}
-
 static void nbio_v7_0_init_registers(struct amdgpu_device *adev)
 {
 
@@ -310,6 +304,5 @@ const struct amdgpu_nbio_funcs nbio_v7_0_funcs = {
 	.get_clockgating_state = nbio_v7_0_get_clockgating_state,
 	.ih_control = nbio_v7_0_ih_control,
 	.init_registers = nbio_v7_0_init_registers,
-	.detect_hw_virt = nbio_v7_0_detect_hw_virt,
 	.remap_hdp_registers = nbio_v7_0_remap_hdp_registers,
 };
diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c
index 149d386590df..e629156173d3 100644
--- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c
@@ -185,7 +185,7 @@ static void nbio_v7_4_ih_doorbell_range(struct amdgpu_device *adev,
 
 	if (use_doorbell) {
 		ih_doorbell_range = REG_SET_FIELD(ih_doorbell_range, BIF_IH_DOORBELL_RANGE, OFFSET, doorbell_index);
-		ih_doorbell_range = REG_SET_FIELD(ih_doorbell_range, BIF_IH_DOORBELL_RANGE, SIZE, 2);
+		ih_doorbell_range = REG_SET_FIELD(ih_doorbell_range, BIF_IH_DOORBELL_RANGE, SIZE, 4);
 	} else
 		ih_doorbell_range = REG_SET_FIELD(ih_doorbell_range, BIF_IH_DOORBELL_RANGE, SIZE, 0);
 
@@ -292,23 +292,6 @@ const struct nbio_hdp_flush_reg nbio_v7_4_hdp_flush_reg = {
 	.ref_and_mask_sdma7 = GPU_HDP_FLUSH_DONE__RSVD_ENG5_MASK,
 };
 
-static void nbio_v7_4_detect_hw_virt(struct amdgpu_device *adev)
-{
-	uint32_t reg;
-
-	reg = RREG32_SOC15(NBIO, 0, mmRCC_IOV_FUNC_IDENTIFIER);
-	if (reg & 1)
-		adev->virt.caps |= AMDGPU_SRIOV_CAPS_IS_VF;
-
-	if (reg & 0x80000000)
-		adev->virt.caps |= AMDGPU_SRIOV_CAPS_ENABLE_IOV;
-
-	if (!reg) {
-		if (is_virtual_machine())	/* passthrough mode exclus sriov mod */
-			adev->virt.caps |= AMDGPU_PASSTHROUGH_MODE;
-	}
-}
-
 static void nbio_v7_4_init_registers(struct amdgpu_device *adev)
 {
 
@@ -340,14 +323,20 @@ static void nbio_v7_4_handle_ras_controller_intr_no_bifring(struct amdgpu_device
 		obj->err_data.ce_count += err_data.ce_count;
 
 		if (err_data.ce_count)
-			DRM_INFO("%ld correctable errors detected in %s block\n",
-				obj->err_data.ce_count, adev->nbio.ras_if->name);
+			dev_info(adev->dev, "%ld correctable hardware "
+					"errors detected in %s block, "
+					"no user action is needed.\n",
+					obj->err_data.ce_count,
+					adev->nbio.ras_if->name);
 
 		if (err_data.ue_count)
-			DRM_INFO("%ld uncorrectable errors detected in %s block\n",
-				obj->err_data.ue_count, adev->nbio.ras_if->name);
+			dev_info(adev->dev, "%ld uncorrectable hardware "
+					"errors detected in %s block\n",
+					obj->err_data.ue_count,
+					adev->nbio.ras_if->name);
 
-		DRM_WARN("RAS controller interrupt triggered by NBIF error\n");
+		dev_info(adev->dev, "RAS controller interrupt triggered "
+					"by NBIF error\n");
 
 		/* ras_controller_int is dedicated for nbif ras error,
 		 * not the global interrupt for sync flood
@@ -561,7 +550,6 @@ const struct amdgpu_nbio_funcs nbio_v7_4_funcs = {
 	.get_clockgating_state = nbio_v7_4_get_clockgating_state,
 	.ih_control = nbio_v7_4_ih_control,
 	.init_registers = nbio_v7_4_init_registers,
-	.detect_hw_virt = nbio_v7_4_detect_hw_virt,
 	.remap_hdp_registers = nbio_v7_4_remap_hdp_registers,
 	.handle_ras_controller_intr_no_bifring = nbio_v7_4_handle_ras_controller_intr_no_bifring,
 	.handle_ras_err_event_athub_intr_no_bifring = nbio_v7_4_handle_ras_err_event_athub_intr_no_bifring,
diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c b/drivers/gpu/drm/amd/amdgpu/nv.c
index 52318b03c424..9c42316c47c0 100644
--- a/drivers/gpu/drm/amd/amdgpu/nv.c
+++ b/drivers/gpu/drm/amd/amdgpu/nv.c
@@ -453,18 +453,19 @@ int nv_set_ip_blocks(struct amdgpu_device *adev)
 {
 	int r;
 
-	/* Set IP register base before any HW register access */
-	r = nv_reg_base_init(adev);
-	if (r)
-		return r;
-
 	adev->nbio.funcs = &nbio_v2_3_funcs;
 	adev->nbio.hdp_flush_reg = &nbio_v2_3_hdp_flush_reg;
 
-	adev->nbio.funcs->detect_hw_virt(adev);
-
-	if (amdgpu_sriov_vf(adev))
+	if (amdgpu_sriov_vf(adev)) {
 		adev->virt.ops = &xgpu_nv_virt_ops;
+		/* try send GPU_INIT_DATA request to host */
+		amdgpu_virt_request_init_data(adev);
+	}
+
+	/* Set IP register base before any HW register access */
+	r = nv_reg_base_init(adev);
+	if (r)
+		return r;
 
 	switch (adev->asic_type) {
 	case CHIP_NAVI10:
@@ -497,8 +498,7 @@ int nv_set_ip_blocks(struct amdgpu_device *adev)
 		amdgpu_device_ip_block_add(adev, &gmc_v10_0_ip_block);
 		amdgpu_device_ip_block_add(adev, &navi10_ih_ip_block);
 		amdgpu_device_ip_block_add(adev, &psp_v11_0_ip_block);
-		if (adev->firmware.load_type == AMDGPU_FW_LOAD_PSP &&
-		    !amdgpu_sriov_vf(adev))
+		if (adev->firmware.load_type == AMDGPU_FW_LOAD_PSP)
 			amdgpu_device_ip_block_add(adev, &smu_v11_0_ip_block);
 		if (adev->enable_virtual_display || amdgpu_sriov_vf(adev))
 			amdgpu_device_ip_block_add(adev, &dce_virtual_ip_block);
diff --git a/drivers/gpu/drm/amd/amdgpu/nvd.h b/drivers/gpu/drm/amd/amdgpu/nvd.h
index 1de984647dbb..fd6b58243b03 100644
--- a/drivers/gpu/drm/amd/amdgpu/nvd.h
+++ b/drivers/gpu/drm/amd/amdgpu/nvd.h
@@ -256,6 +256,54 @@
 #define	PACKET3_BLK_CNTX_UPDATE				0x53
 #define	PACKET3_INCR_UPDT_STATE				0x55
 #define	PACKET3_ACQUIRE_MEM				0x58
+/* 1.  HEADER
+ * 2.  COHER_CNTL [30:0]
+ * 2.1 ENGINE_SEL [31:31]
+ * 2.  COHER_SIZE [31:0]
+ * 3.  COHER_SIZE_HI [7:0]
+ * 4.  COHER_BASE_LO [31:0]
+ * 5.  COHER_BASE_HI [23:0]
+ * 7.  POLL_INTERVAL [15:0]
+ * 8.  GCR_CNTL [18:0]
+ */
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GLI_INV(x) ((x) << 0)
+		/*
+		 * 0:NOP
+		 * 1:ALL
+		 * 2:RANGE
+		 * 3:FIRST_LAST
+		 */
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GL1_RANGE(x) ((x) << 2)
+		/*
+		 * 0:ALL
+		 * 1:reserved
+		 * 2:RANGE
+		 * 3:FIRST_LAST
+		 */
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GLM_WB(x) ((x) << 4)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GLM_INV(x) ((x) << 5)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GLK_WB(x) ((x) << 6)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GLK_INV(x) ((x) << 7)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GLV_INV(x) ((x) << 8)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GL1_INV(x) ((x) << 9)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GL2_US(x) ((x) << 10)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GL2_RANGE(x) ((x) << 11)
+		/*
+		 * 0:ALL
+		 * 1:VOL
+		 * 2:RANGE
+		 * 3:FIRST_LAST
+		 */
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GL2_DISCARD(x)  ((x) << 13)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GL2_INV(x) ((x) << 14)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_GL2_WB(x) ((x) << 15)
+#define 	PACKET3_ACQUIRE_MEM_GCR_CNTL_SEQ(x) ((x) << 16)
+		/*
+		 * 0: PARALLEL
+		 * 1: FORWARD
+		 * 2: REVERSE
+		 */
+#define 	PACKET3_ACQUIRE_MEM_GCR_RANGE_IS_PA  (1 << 18)
 #define	PACKET3_REWIND					0x59
 #define	PACKET3_INTERRUPT				0x5A
 #define	PACKET3_GEN_PDEPTE				0x5B
@@ -306,6 +354,7 @@
 #define	PACKET3_GET_LOD_STATS				0x8E
 #define	PACKET3_DRAW_MULTI_PREAMBLE			0x8F
 #define	PACKET3_FRAME_CONTROL				0x90
+#			define FRAME_TMZ	(1 << 0)
 #			define FRAME_CMD(x) ((x) << 28)
 			/*
 			 * x=0: tmz_begin
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v10_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v10_0.c
index 7539104175e8..90727cfb4447 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v10_0.c
@@ -50,7 +50,6 @@ static int psp_v10_0_init_microcode(struct psp_context *psp)
 	const char *chip_name;
 	char fw_name[30];
 	int err = 0;
-	const struct psp_firmware_header_v1_0 *hdr;
 	const struct ta_firmware_header_v1_0 *ta_hdr;
 	DRM_DEBUG("\n");
 
@@ -66,22 +65,10 @@ static int psp_v10_0_init_microcode(struct psp_context *psp)
 	default: BUG();
 	}
 
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_asd.bin", chip_name);
-	err = request_firmware(&adev->psp.asd_fw, fw_name, adev->dev);
+	err = psp_init_asd_microcode(psp, chip_name);
 	if (err)
 		goto out;
 
-	err = amdgpu_ucode_validate(adev->psp.asd_fw);
-	if (err)
-		goto out;
-
-	hdr = (const struct psp_firmware_header_v1_0 *)adev->psp.asd_fw->data;
-	adev->psp.asd_fw_version = le32_to_cpu(hdr->header.ucode_version);
-	adev->psp.asd_feature_version = le32_to_cpu(hdr->ucode_feature_version);
-	adev->psp.asd_ucode_size = le32_to_cpu(hdr->header.ucode_size_bytes);
-	adev->psp.asd_start_addr = (uint8_t *)hdr +
-				le32_to_cpu(hdr->header.ucode_array_offset_bytes);
-
 	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ta.bin", chip_name);
 	err = request_firmware(&adev->psp.ta_fw, fw_name, adev->dev);
 	if (err) {
@@ -126,8 +113,6 @@ static int psp_v10_0_init_microcode(struct psp_context *psp)
 		dev_err(adev->dev,
 			"psp v10.0: Failed to load firmware \"%s\"\n",
 			fw_name);
-		release_firmware(adev->psp.asd_fw);
-		adev->psp.asd_fw = NULL;
 	}
 
 	return err;
@@ -230,129 +215,6 @@ static int psp_v10_0_ring_destroy(struct psp_context *psp,
 	return ret;
 }
 
-static int
-psp_v10_0_sram_map(struct amdgpu_device *adev,
-		   unsigned int *sram_offset, unsigned int *sram_addr_reg_offset,
-		   unsigned int *sram_data_reg_offset,
-		   enum AMDGPU_UCODE_ID ucode_id)
-{
-	int ret = 0;
-
-	switch(ucode_id) {
-/* TODO: needs to confirm */
-#if 0
-	case AMDGPU_UCODE_ID_SMC:
-		*sram_offset = 0;
-		*sram_addr_reg_offset = 0;
-		*sram_data_reg_offset = 0;
-		break;
-#endif
-
-	case AMDGPU_UCODE_ID_CP_CE:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_CE_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_CE_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_PFP:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_PFP_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_PFP_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_ME:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_ME_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_ME_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_MEC1:
-		*sram_offset = 0x10000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_MEC_ME1_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_MEC_ME1_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_MEC2:
-		*sram_offset = 0x10000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_MEC2_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_MEC2_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_RLC_G:
-		*sram_offset = 0x2000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_SDMA0:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_UCODE_DATA);
-		break;
-
-/* TODO: needs to confirm */
-#if 0
-	case AMDGPU_UCODE_ID_SDMA1:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-
-	case AMDGPU_UCODE_ID_UVD:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-
-	case AMDGPU_UCODE_ID_VCE:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-#endif
-
-	case AMDGPU_UCODE_ID_MAXIMUM:
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-static bool psp_v10_0_compare_sram_data(struct psp_context *psp,
-					struct amdgpu_firmware_info *ucode,
-					enum AMDGPU_UCODE_ID ucode_type)
-{
-	int err = 0;
-	unsigned int fw_sram_reg_val = 0;
-	unsigned int fw_sram_addr_reg_offset = 0;
-	unsigned int fw_sram_data_reg_offset = 0;
-	unsigned int ucode_size;
-	uint32_t *ucode_mem = NULL;
-	struct amdgpu_device *adev = psp->adev;
-
-	err = psp_v10_0_sram_map(adev, &fw_sram_reg_val, &fw_sram_addr_reg_offset,
-				&fw_sram_data_reg_offset, ucode_type);
-	if (err)
-		return false;
-
-	WREG32(fw_sram_addr_reg_offset, fw_sram_reg_val);
-
-	ucode_size = ucode->ucode_size;
-	ucode_mem = (uint32_t *)ucode->kaddr;
-	while (!ucode_size) {
-		fw_sram_reg_val = RREG32(fw_sram_data_reg_offset);
-
-		if (*ucode_mem != fw_sram_reg_val)
-			return false;
-
-		ucode_mem++;
-		/* 4 bytes */
-		ucode_size -= 4;
-	}
-
-	return true;
-}
-
-
 static int psp_v10_0_mode1_reset(struct psp_context *psp)
 {
 	DRM_INFO("psp mode 1 reset not supported now! \n");
@@ -379,7 +241,6 @@ static const struct psp_funcs psp_v10_0_funcs = {
 	.ring_create = psp_v10_0_ring_create,
 	.ring_stop = psp_v10_0_ring_stop,
 	.ring_destroy = psp_v10_0_ring_destroy,
-	.compare_sram_data = psp_v10_0_compare_sram_data,
 	.mode1_reset = psp_v10_0_mode1_reset,
 	.ring_get_wptr = psp_v10_0_ring_get_wptr,
 	.ring_set_wptr = psp_v10_0_ring_set_wptr,
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
index 0afd610a1263..97c80f1d5731 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
@@ -75,10 +75,6 @@ static int psp_v11_0_init_microcode(struct psp_context *psp)
 	const char *chip_name;
 	char fw_name[30];
 	int err = 0;
-	const struct psp_firmware_header_v1_0 *sos_hdr;
-	const struct psp_firmware_header_v1_1 *sos_hdr_v1_1;
-	const struct psp_firmware_header_v1_2 *sos_hdr_v1_2;
-	const struct psp_firmware_header_v1_0 *asd_hdr;
 	const struct ta_firmware_header_v1_0 *ta_hdr;
 
 	DRM_DEBUG("\n");
@@ -103,66 +99,13 @@ static int psp_v11_0_init_microcode(struct psp_context *psp)
 		BUG();
 	}
 
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sos.bin", chip_name);
-	err = request_firmware(&adev->psp.sos_fw, fw_name, adev->dev);
+	err = psp_init_sos_microcode(psp, chip_name);
 	if (err)
-		goto out;
+		return err;
 
-	err = amdgpu_ucode_validate(adev->psp.sos_fw);
+	err = psp_init_asd_microcode(psp, chip_name);
 	if (err)
-		goto out;
-
-	sos_hdr = (const struct psp_firmware_header_v1_0 *)adev->psp.sos_fw->data;
-	amdgpu_ucode_print_psp_hdr(&sos_hdr->header);
-
-	switch (sos_hdr->header.header_version_major) {
-	case 1:
-		adev->psp.sos_fw_version = le32_to_cpu(sos_hdr->header.ucode_version);
-		adev->psp.sos_feature_version = le32_to_cpu(sos_hdr->ucode_feature_version);
-		adev->psp.sos_bin_size = le32_to_cpu(sos_hdr->sos_size_bytes);
-		adev->psp.sys_bin_size = le32_to_cpu(sos_hdr->sos_offset_bytes);
-		adev->psp.sys_start_addr = (uint8_t *)sos_hdr +
-				le32_to_cpu(sos_hdr->header.ucode_array_offset_bytes);
-		adev->psp.sos_start_addr = (uint8_t *)adev->psp.sys_start_addr +
-				le32_to_cpu(sos_hdr->sos_offset_bytes);
-		if (sos_hdr->header.header_version_minor == 1) {
-			sos_hdr_v1_1 = (const struct psp_firmware_header_v1_1 *)adev->psp.sos_fw->data;
-			adev->psp.toc_bin_size = le32_to_cpu(sos_hdr_v1_1->toc_size_bytes);
-			adev->psp.toc_start_addr = (uint8_t *)adev->psp.sys_start_addr +
-					le32_to_cpu(sos_hdr_v1_1->toc_offset_bytes);
-			adev->psp.kdb_bin_size = le32_to_cpu(sos_hdr_v1_1->kdb_size_bytes);
-			adev->psp.kdb_start_addr = (uint8_t *)adev->psp.sys_start_addr +
-					le32_to_cpu(sos_hdr_v1_1->kdb_offset_bytes);
-		}
-		if (sos_hdr->header.header_version_minor == 2) {
-			sos_hdr_v1_2 = (const struct psp_firmware_header_v1_2 *)adev->psp.sos_fw->data;
-			adev->psp.kdb_bin_size = le32_to_cpu(sos_hdr_v1_2->kdb_size_bytes);
-			adev->psp.kdb_start_addr = (uint8_t *)adev->psp.sys_start_addr +
-						    le32_to_cpu(sos_hdr_v1_2->kdb_offset_bytes);
-		}
-		break;
-	default:
-		dev_err(adev->dev,
-			"Unsupported psp sos firmware\n");
-		err = -EINVAL;
-		goto out;
-	}
-
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_asd.bin", chip_name);
-	err = request_firmware(&adev->psp.asd_fw, fw_name, adev->dev);
-	if (err)
-		goto out1;
-
-	err = amdgpu_ucode_validate(adev->psp.asd_fw);
-	if (err)
-		goto out1;
-
-	asd_hdr = (const struct psp_firmware_header_v1_0 *)adev->psp.asd_fw->data;
-	adev->psp.asd_fw_version = le32_to_cpu(asd_hdr->header.ucode_version);
-	adev->psp.asd_feature_version = le32_to_cpu(asd_hdr->ucode_feature_version);
-	adev->psp.asd_ucode_size = le32_to_cpu(asd_hdr->header.ucode_size_bytes);
-	adev->psp.asd_start_addr = (uint8_t *)asd_hdr +
-				le32_to_cpu(asd_hdr->header.ucode_array_offset_bytes);
+		return err;
 
 	switch (adev->asic_type) {
 	case CHIP_VEGA20:
@@ -194,6 +137,8 @@ static int psp_v11_0_init_microcode(struct psp_context *psp)
 	case CHIP_NAVI10:
 	case CHIP_NAVI14:
 	case CHIP_NAVI12:
+		if (amdgpu_sriov_vf(adev))
+			break;
 		snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ta.bin", chip_name);
 		err = request_firmware(&adev->psp.ta_fw, fw_name, adev->dev);
 		if (err) {
@@ -229,15 +174,6 @@ static int psp_v11_0_init_microcode(struct psp_context *psp)
 out2:
 	release_firmware(adev->psp.ta_fw);
 	adev->psp.ta_fw = NULL;
-out1:
-	release_firmware(adev->psp.asd_fw);
-	adev->psp.asd_fw = NULL;
-out:
-	dev_err(adev->dev,
-		"psp v11.0: Failed to load firmware \"%s\"\n", fw_name);
-	release_firmware(adev->psp.sos_fw);
-	adev->psp.sos_fw = NULL;
-
 	return err;
 }
 
@@ -283,11 +219,8 @@ static int psp_v11_0_bootloader_load_kdb(struct psp_context *psp)
 	/* Check tOS sign of life register to confirm sys driver and sOS
 	 * are already been loaded.
 	 */
-	if (psp_v11_0_is_sos_alive(psp)) {
-		psp->sos_fw_version = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_58);
-		dev_info(adev->dev, "sos fw version = 0x%x.\n", psp->sos_fw_version);
+	if (psp_v11_0_is_sos_alive(psp))
 		return 0;
-	}
 
 	ret = psp_v11_0_wait_for_bootloader(psp);
 	if (ret)
@@ -319,11 +252,8 @@ static int psp_v11_0_bootloader_load_sysdrv(struct psp_context *psp)
 	/* Check sOS sign of life register to confirm sys driver and sOS
 	 * are already been loaded.
 	 */
-	if (psp_v11_0_is_sos_alive(psp)) {
-		psp->sos_fw_version = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_58);
-		dev_info(adev->dev, "sos fw version = 0x%x.\n", psp->sos_fw_version);
+	if (psp_v11_0_is_sos_alive(psp))
 		return 0;
-	}
 
 	ret = psp_v11_0_wait_for_bootloader(psp);
 	if (ret)
@@ -446,13 +376,6 @@ static int psp_v11_0_ring_init(struct psp_context *psp,
 	return 0;
 }
 
-static bool psp_v11_0_support_vmr_ring(struct psp_context *psp)
-{
-	if (amdgpu_sriov_vf(psp->adev) && psp->sos_fw_version > 0x80045)
-		return true;
-	return false;
-}
-
 static int psp_v11_0_ring_stop(struct psp_context *psp,
 			      enum psp_ring_type ring_type)
 {
@@ -460,7 +383,7 @@ static int psp_v11_0_ring_stop(struct psp_context *psp,
 	struct amdgpu_device *adev = psp->adev;
 
 	/* Write the ring destroy command*/
-	if (psp_v11_0_support_vmr_ring(psp))
+	if (amdgpu_sriov_vf(adev))
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
 				     GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING);
 	else
@@ -471,7 +394,7 @@ static int psp_v11_0_ring_stop(struct psp_context *psp,
 	mdelay(20);
 
 	/* Wait for response flag (bit 31) */
-	if (psp_v11_0_support_vmr_ring(psp))
+	if (amdgpu_sriov_vf(adev))
 		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
 				   0x80000000, 0x80000000, false);
 	else
@@ -489,7 +412,7 @@ static int psp_v11_0_ring_create(struct psp_context *psp,
 	struct psp_ring *ring = &psp->km_ring;
 	struct amdgpu_device *adev = psp->adev;
 
-	if (psp_v11_0_support_vmr_ring(psp)) {
+	if (amdgpu_sriov_vf(adev)) {
 		ret = psp_v11_0_ring_stop(psp, ring_type);
 		if (ret) {
 			DRM_ERROR("psp_v11_0_ring_stop_sriov failed!\n");
@@ -567,138 +490,6 @@ static int psp_v11_0_ring_destroy(struct psp_context *psp,
 	return ret;
 }
 
-static int
-psp_v11_0_sram_map(struct amdgpu_device *adev,
-		  unsigned int *sram_offset, unsigned int *sram_addr_reg_offset,
-		  unsigned int *sram_data_reg_offset,
-		  enum AMDGPU_UCODE_ID ucode_id)
-{
-	int ret = 0;
-
-	switch (ucode_id) {
-/* TODO: needs to confirm */
-#if 0
-	case AMDGPU_UCODE_ID_SMC:
-		*sram_offset = 0;
-		*sram_addr_reg_offset = 0;
-		*sram_data_reg_offset = 0;
-		break;
-#endif
-
-	case AMDGPU_UCODE_ID_CP_CE:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_CE_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_CE_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_PFP:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_PFP_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_PFP_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_ME:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_ME_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_ME_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_MEC1:
-		*sram_offset = 0x10000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_MEC_ME1_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_MEC_ME1_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_MEC2:
-		*sram_offset = 0x10000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_MEC2_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_MEC2_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_RLC_G:
-		*sram_offset = 0x2000;
-		if (adev->asic_type < CHIP_NAVI10) {
-			*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_UCODE_ADDR);
-			*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_UCODE_DATA);
-		} else {
-			*sram_addr_reg_offset = adev->reg_offset[GC_HWIP][0][1] + mmRLC_GPM_UCODE_ADDR_NV10;
-			*sram_data_reg_offset = adev->reg_offset[GC_HWIP][0][1] + mmRLC_GPM_UCODE_DATA_NV10;
-		}
-		break;
-
-	case AMDGPU_UCODE_ID_SDMA0:
-		*sram_offset = 0x0;
-		if (adev->asic_type < CHIP_NAVI10) {
-			*sram_addr_reg_offset = SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_UCODE_ADDR);
-			*sram_data_reg_offset = SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_UCODE_DATA);
-		} else {
-			*sram_addr_reg_offset = adev->reg_offset[GC_HWIP][0][1] + mmSDMA0_UCODE_ADDR_NV10;
-			*sram_data_reg_offset = adev->reg_offset[GC_HWIP][0][1] + mmSDMA0_UCODE_DATA_NV10;
-		}
-		break;
-
-/* TODO: needs to confirm */
-#if 0
-	case AMDGPU_UCODE_ID_SDMA1:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-
-	case AMDGPU_UCODE_ID_UVD:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-
-	case AMDGPU_UCODE_ID_VCE:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-#endif
-
-	case AMDGPU_UCODE_ID_MAXIMUM:
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-static bool psp_v11_0_compare_sram_data(struct psp_context *psp,
-				       struct amdgpu_firmware_info *ucode,
-				       enum AMDGPU_UCODE_ID ucode_type)
-{
-	int err = 0;
-	unsigned int fw_sram_reg_val = 0;
-	unsigned int fw_sram_addr_reg_offset = 0;
-	unsigned int fw_sram_data_reg_offset = 0;
-	unsigned int ucode_size;
-	uint32_t *ucode_mem = NULL;
-	struct amdgpu_device *adev = psp->adev;
-
-	err = psp_v11_0_sram_map(adev, &fw_sram_reg_val, &fw_sram_addr_reg_offset,
-				&fw_sram_data_reg_offset, ucode_type);
-	if (err)
-		return false;
-
-	WREG32(fw_sram_addr_reg_offset, fw_sram_reg_val);
-
-	ucode_size = ucode->ucode_size;
-	ucode_mem = (uint32_t *)ucode->kaddr;
-	while (ucode_size) {
-		fw_sram_reg_val = RREG32(fw_sram_data_reg_offset);
-
-		if (*ucode_mem != fw_sram_reg_val)
-			return false;
-
-		ucode_mem++;
-		/* 4 bytes */
-		ucode_size -= 4;
-	}
-
-	return true;
-}
-
 static int psp_v11_0_mode1_reset(struct psp_context *psp)
 {
 	int ret;
@@ -1099,7 +890,7 @@ static uint32_t psp_v11_0_ring_get_wptr(struct psp_context *psp)
 	uint32_t data;
 	struct amdgpu_device *adev = psp->adev;
 
-	if (psp_v11_0_support_vmr_ring(psp))
+	if (amdgpu_sriov_vf(adev))
 		data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102);
 	else
 		data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_67);
@@ -1111,7 +902,7 @@ static void psp_v11_0_ring_set_wptr(struct psp_context *psp, uint32_t value)
 {
 	struct amdgpu_device *adev = psp->adev;
 
-	if (psp_v11_0_support_vmr_ring(psp)) {
+	if (amdgpu_sriov_vf(adev)) {
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102, value);
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101, GFX_CTRL_CMD_ID_CONSUME_CMD);
 	} else
@@ -1203,13 +994,11 @@ static const struct psp_funcs psp_v11_0_funcs = {
 	.ring_create = psp_v11_0_ring_create,
 	.ring_stop = psp_v11_0_ring_stop,
 	.ring_destroy = psp_v11_0_ring_destroy,
-	.compare_sram_data = psp_v11_0_compare_sram_data,
 	.mode1_reset = psp_v11_0_mode1_reset,
 	.xgmi_get_topology_info = psp_v11_0_xgmi_get_topology_info,
 	.xgmi_set_topology_info = psp_v11_0_xgmi_set_topology_info,
 	.xgmi_get_hive_id = psp_v11_0_xgmi_get_hive_id,
 	.xgmi_get_node_id = psp_v11_0_xgmi_get_node_id,
-	.support_vmr_ring = psp_v11_0_support_vmr_ring,
 	.ras_trigger_error = psp_v11_0_ras_trigger_error,
 	.ras_cure_posion = psp_v11_0_ras_cure_posion,
 	.rlc_autoload_start = psp_v11_0_rlc_autoload_start,
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v12_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v12_0.c
index 58d8b6d732e8..6c9614f77d33 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v12_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v12_0.c
@@ -45,11 +45,7 @@ static int psp_v12_0_init_microcode(struct psp_context *psp)
 {
 	struct amdgpu_device *adev = psp->adev;
 	const char *chip_name;
-	char fw_name[30];
 	int err = 0;
-	const struct psp_firmware_header_v1_0 *asd_hdr;
-
-	DRM_DEBUG("\n");
 
 	switch (adev->asic_type) {
 	case CHIP_RENOIR:
@@ -59,28 +55,7 @@ static int psp_v12_0_init_microcode(struct psp_context *psp)
 		BUG();
 	}
 
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_asd.bin", chip_name);
-	err = request_firmware(&adev->psp.asd_fw, fw_name, adev->dev);
-	if (err)
-		goto out1;
-
-	err = amdgpu_ucode_validate(adev->psp.asd_fw);
-	if (err)
-		goto out1;
-
-	asd_hdr = (const struct psp_firmware_header_v1_0 *)adev->psp.asd_fw->data;
-	adev->psp.asd_fw_version = le32_to_cpu(asd_hdr->header.ucode_version);
-	adev->psp.asd_feature_version = le32_to_cpu(asd_hdr->ucode_feature_version);
-	adev->psp.asd_ucode_size = le32_to_cpu(asd_hdr->header.ucode_size_bytes);
-	adev->psp.asd_start_addr = (uint8_t *)asd_hdr +
-				le32_to_cpu(asd_hdr->header.ucode_array_offset_bytes);
-
-	return 0;
-
-out1:
-	release_firmware(adev->psp.asd_fw);
-	adev->psp.asd_fw = NULL;
-
+	err = psp_init_asd_microcode(psp, chip_name);
 	return err;
 }
 
@@ -95,11 +70,8 @@ static int psp_v12_0_bootloader_load_sysdrv(struct psp_context *psp)
 	 * are already been loaded.
 	 */
 	sol_reg = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_81);
-	if (sol_reg) {
-		psp->sos_fw_version = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_58);
-		printk("sos fw version = 0x%x.\n", psp->sos_fw_version);
+	if (sol_reg)
 		return 0;
-	}
 
 	/* Wait for bootloader to signify that is ready having bit 31 of C2PMSG_35 set to 1 */
 	ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_35),
@@ -228,13 +200,6 @@ static int psp_v12_0_ring_init(struct psp_context *psp,
 	return 0;
 }
 
-static bool psp_v12_0_support_vmr_ring(struct psp_context *psp)
-{
-	if (amdgpu_sriov_vf(psp->adev) && psp->sos_fw_version > 0x80045)
-		return true;
-	return false;
-}
-
 static int psp_v12_0_ring_create(struct psp_context *psp,
 				enum psp_ring_type ring_type)
 {
@@ -243,7 +208,7 @@ static int psp_v12_0_ring_create(struct psp_context *psp,
 	struct psp_ring *ring = &psp->km_ring;
 	struct amdgpu_device *adev = psp->adev;
 
-	if (psp_v12_0_support_vmr_ring(psp)) {
+	if (amdgpu_sriov_vf(psp->adev)) {
 		/* Write low address of the ring to C2PMSG_102 */
 		psp_ring_reg = lower_32_bits(ring->ring_mem_mc_addr);
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102, psp_ring_reg);
@@ -295,7 +260,7 @@ static int psp_v12_0_ring_stop(struct psp_context *psp,
 	struct amdgpu_device *adev = psp->adev;
 
 	/* Write the ring destroy command*/
-	if (psp_v12_0_support_vmr_ring(psp))
+	if (amdgpu_sriov_vf(adev))
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
 				     GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING);
 	else
@@ -306,7 +271,7 @@ static int psp_v12_0_ring_stop(struct psp_context *psp,
 	mdelay(20);
 
 	/* Wait for response flag (bit 31) */
-	if (psp_v12_0_support_vmr_ring(psp))
+	if (amdgpu_sriov_vf(adev))
 		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
 				   0x80000000, 0x80000000, false);
 	else
@@ -334,128 +299,6 @@ static int psp_v12_0_ring_destroy(struct psp_context *psp,
 	return ret;
 }
 
-static int
-psp_v12_0_sram_map(struct amdgpu_device *adev,
-		  unsigned int *sram_offset, unsigned int *sram_addr_reg_offset,
-		  unsigned int *sram_data_reg_offset,
-		  enum AMDGPU_UCODE_ID ucode_id)
-{
-	int ret = 0;
-
-	switch (ucode_id) {
-/* TODO: needs to confirm */
-#if 0
-	case AMDGPU_UCODE_ID_SMC:
-		*sram_offset = 0;
-		*sram_addr_reg_offset = 0;
-		*sram_data_reg_offset = 0;
-		break;
-#endif
-
-	case AMDGPU_UCODE_ID_CP_CE:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_CE_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_CE_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_PFP:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_PFP_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_PFP_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_ME:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_ME_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_ME_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_MEC1:
-		*sram_offset = 0x10000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_MEC_ME1_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_MEC_ME1_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_MEC2:
-		*sram_offset = 0x10000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_MEC2_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_MEC2_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_RLC_G:
-		*sram_offset = 0x2000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_SDMA0:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_UCODE_DATA);
-		break;
-
-/* TODO: needs to confirm */
-#if 0
-	case AMDGPU_UCODE_ID_SDMA1:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-
-	case AMDGPU_UCODE_ID_UVD:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-
-	case AMDGPU_UCODE_ID_VCE:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-#endif
-
-	case AMDGPU_UCODE_ID_MAXIMUM:
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-static bool psp_v12_0_compare_sram_data(struct psp_context *psp,
-				       struct amdgpu_firmware_info *ucode,
-				       enum AMDGPU_UCODE_ID ucode_type)
-{
-	int err = 0;
-	unsigned int fw_sram_reg_val = 0;
-	unsigned int fw_sram_addr_reg_offset = 0;
-	unsigned int fw_sram_data_reg_offset = 0;
-	unsigned int ucode_size;
-	uint32_t *ucode_mem = NULL;
-	struct amdgpu_device *adev = psp->adev;
-
-	err = psp_v12_0_sram_map(adev, &fw_sram_reg_val, &fw_sram_addr_reg_offset,
-				&fw_sram_data_reg_offset, ucode_type);
-	if (err)
-		return false;
-
-	WREG32(fw_sram_addr_reg_offset, fw_sram_reg_val);
-
-	ucode_size = ucode->ucode_size;
-	ucode_mem = (uint32_t *)ucode->kaddr;
-	while (ucode_size) {
-		fw_sram_reg_val = RREG32(fw_sram_data_reg_offset);
-
-		if (*ucode_mem != fw_sram_reg_val)
-			return false;
-
-		ucode_mem++;
-		/* 4 bytes */
-		ucode_size -= 4;
-	}
-
-	return true;
-}
-
 static int psp_v12_0_mode1_reset(struct psp_context *psp)
 {
 	int ret;
@@ -495,7 +338,7 @@ static uint32_t psp_v12_0_ring_get_wptr(struct psp_context *psp)
 	uint32_t data;
 	struct amdgpu_device *adev = psp->adev;
 
-	if (psp_v12_0_support_vmr_ring(psp))
+	if (amdgpu_sriov_vf(adev))
 		data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102);
 	else
 		data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_67);
@@ -507,7 +350,7 @@ static void psp_v12_0_ring_set_wptr(struct psp_context *psp, uint32_t value)
 {
 	struct amdgpu_device *adev = psp->adev;
 
-	if (psp_v12_0_support_vmr_ring(psp)) {
+	if (amdgpu_sriov_vf(adev)) {
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102, value);
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101, GFX_CTRL_CMD_ID_CONSUME_CMD);
 	} else
@@ -522,7 +365,6 @@ static const struct psp_funcs psp_v12_0_funcs = {
 	.ring_create = psp_v12_0_ring_create,
 	.ring_stop = psp_v12_0_ring_stop,
 	.ring_destroy = psp_v12_0_ring_destroy,
-	.compare_sram_data = psp_v12_0_compare_sram_data,
 	.mode1_reset = psp_v12_0_mode1_reset,
 	.ring_get_wptr = psp_v12_0_ring_get_wptr,
 	.ring_set_wptr = psp_v12_0_ring_set_wptr,
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v3_1.c b/drivers/gpu/drm/amd/amdgpu/psp_v3_1.c
index 735c43c7daab..f2e725f72d2f 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v3_1.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v3_1.c
@@ -50,9 +50,6 @@ MODULE_FIRMWARE("amdgpu/vega12_asd.bin");
 
 #define smnMP1_FIRMWARE_FLAGS 0x3010028
 
-static uint32_t sos_old_versions[] = {1517616, 1510592, 1448594, 1446554};
-
-static bool psp_v3_1_support_vmr_ring(struct psp_context *psp);
 static int psp_v3_1_ring_stop(struct psp_context *psp,
 			      enum psp_ring_type ring_type);
 
@@ -60,9 +57,7 @@ static int psp_v3_1_init_microcode(struct psp_context *psp)
 {
 	struct amdgpu_device *adev = psp->adev;
 	const char *chip_name;
-	char fw_name[30];
 	int err = 0;
-	const struct psp_firmware_header_v1_0 *hdr;
 
 	DRM_DEBUG("\n");
 
@@ -76,55 +71,15 @@ static int psp_v3_1_init_microcode(struct psp_context *psp)
 	default: BUG();
 	}
 
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sos.bin", chip_name);
-	err = request_firmware(&adev->psp.sos_fw, fw_name, adev->dev);
-	if (err)
-		goto out;
-
-	err = amdgpu_ucode_validate(adev->psp.sos_fw);
+	err = psp_init_sos_microcode(psp, chip_name);
 	if (err)
-		goto out;
-
-	hdr = (const struct psp_firmware_header_v1_0 *)adev->psp.sos_fw->data;
-	adev->psp.sos_fw_version = le32_to_cpu(hdr->header.ucode_version);
-	adev->psp.sos_feature_version = le32_to_cpu(hdr->ucode_feature_version);
-	adev->psp.sos_bin_size = le32_to_cpu(hdr->sos_size_bytes);
-	adev->psp.sys_bin_size = le32_to_cpu(hdr->header.ucode_size_bytes) -
-					le32_to_cpu(hdr->sos_size_bytes);
-	adev->psp.sys_start_addr = (uint8_t *)hdr +
-				le32_to_cpu(hdr->header.ucode_array_offset_bytes);
-	adev->psp.sos_start_addr = (uint8_t *)adev->psp.sys_start_addr +
-				le32_to_cpu(hdr->sos_offset_bytes);
-
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_asd.bin", chip_name);
-	err = request_firmware(&adev->psp.asd_fw, fw_name, adev->dev);
-	if (err)
-		goto out;
+		return err;
 
-	err = amdgpu_ucode_validate(adev->psp.asd_fw);
+	err = psp_init_asd_microcode(psp, chip_name);
 	if (err)
-		goto out;
-
-	hdr = (const struct psp_firmware_header_v1_0 *)adev->psp.asd_fw->data;
-	adev->psp.asd_fw_version = le32_to_cpu(hdr->header.ucode_version);
-	adev->psp.asd_feature_version = le32_to_cpu(hdr->ucode_feature_version);
-	adev->psp.asd_ucode_size = le32_to_cpu(hdr->header.ucode_size_bytes);
-	adev->psp.asd_start_addr = (uint8_t *)hdr +
-				le32_to_cpu(hdr->header.ucode_array_offset_bytes);
+		return err;
 
 	return 0;
-out:
-	if (err) {
-		dev_err(adev->dev,
-			"psp v3.1: Failed to load firmware \"%s\"\n",
-			fw_name);
-		release_firmware(adev->psp.sos_fw);
-		adev->psp.sos_fw = NULL;
-		release_firmware(adev->psp.asd_fw);
-		adev->psp.asd_fw = NULL;
-	}
-
-	return err;
 }
 
 static int psp_v3_1_bootloader_load_sysdrv(struct psp_context *psp)
@@ -168,41 +123,19 @@ static int psp_v3_1_bootloader_load_sysdrv(struct psp_context *psp)
 	return ret;
 }
 
-static bool psp_v3_1_match_version(struct amdgpu_device *adev, uint32_t ver)
-{
-	int i;
-
-	if (ver == adev->psp.sos_fw_version)
-		return true;
-
-	/*
-	 * Double check if the latest four legacy versions.
-	 * If yes, it is still the right version.
-	 */
-	for (i = 0; i < ARRAY_SIZE(sos_old_versions); i++) {
-		if (sos_old_versions[i] == adev->psp.sos_fw_version)
-			return true;
-	}
-
-	return false;
-}
-
 static int psp_v3_1_bootloader_load_sos(struct psp_context *psp)
 {
 	int ret;
 	unsigned int psp_gfxdrv_command_reg = 0;
 	struct amdgpu_device *adev = psp->adev;
-	uint32_t sol_reg, ver;
+	uint32_t sol_reg;
 
 	/* Check sOS sign of life register to confirm sys driver and sOS
 	 * are already been loaded.
 	 */
 	sol_reg = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_81);
-	if (sol_reg) {
-		psp->sos_fw_version = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_58);
-		printk("sos fw version = 0x%x.\n", psp->sos_fw_version);
+	if (sol_reg)
 		return 0;
-	}
 
 	/* Wait for bootloader to signify that is ready having bit 31 of C2PMSG_35 set to 1 */
 	ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_35),
@@ -227,11 +160,6 @@ static int psp_v3_1_bootloader_load_sos(struct psp_context *psp)
 	ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_81),
 			   RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_81),
 			   0, true);
-
-	ver = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_58);
-	if (!psp_v3_1_match_version(adev, ver))
-		DRM_WARN("SOS version doesn't match\n");
-
 	return ret;
 }
 
@@ -302,7 +230,7 @@ static int psp_v3_1_ring_create(struct psp_context *psp,
 
 	psp_v3_1_reroute_ih(psp);
 
-	if (psp_v3_1_support_vmr_ring(psp)) {
+	if (amdgpu_sriov_vf(adev)) {
 		ret = psp_v3_1_ring_stop(psp, ring_type);
 		if (ret) {
 			DRM_ERROR("psp_v3_1_ring_stop_sriov failed!\n");
@@ -360,34 +288,26 @@ static int psp_v3_1_ring_stop(struct psp_context *psp,
 			      enum psp_ring_type ring_type)
 {
 	int ret = 0;
-	unsigned int psp_ring_reg = 0;
 	struct amdgpu_device *adev = psp->adev;
 
-	if (psp_v3_1_support_vmr_ring(psp)) {
-		/* Write the Destroy GPCOM ring command to C2PMSG_101 */
-		psp_ring_reg = GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING;
-		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101, psp_ring_reg);
-
-		/* there might be handshake issue which needs delay */
-		mdelay(20);
-
-		/* Wait for response flag (bit 31) in C2PMSG_101 */
-		ret = psp_wait_for(psp,
-				SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
-				0x80000000, 0x80000000, false);
-	} else {
-		/* Write the ring destroy command to C2PMSG_64 */
-		psp_ring_reg = 3 << 16;
-		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_64, psp_ring_reg);
+	/* Write the ring destroy command*/
+	if (amdgpu_sriov_vf(adev))
+		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
+				     GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING);
+	else
+		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_64,
+				     GFX_CTRL_CMD_ID_DESTROY_RINGS);
 
-		/* there might be handshake issue which needs delay */
-		mdelay(20);
+	/* there might be handshake issue with hardware which needs delay */
+	mdelay(20);
 
-		/* Wait for response flag (bit 31) in C2PMSG_64 */
-		ret = psp_wait_for(psp,
-				SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_64),
-				0x80000000, 0x80000000, false);
-	}
+	/* Wait for response flag (bit 31) */
+	if (amdgpu_sriov_vf(adev))
+		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
+				   0x80000000, 0x80000000, false);
+	else
+		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_64),
+				   0x80000000, 0x80000000, false);
 
 	return ret;
 }
@@ -410,128 +330,6 @@ static int psp_v3_1_ring_destroy(struct psp_context *psp,
 	return ret;
 }
 
-static int
-psp_v3_1_sram_map(struct amdgpu_device *adev,
-		  unsigned int *sram_offset, unsigned int *sram_addr_reg_offset,
-		  unsigned int *sram_data_reg_offset,
-		  enum AMDGPU_UCODE_ID ucode_id)
-{
-	int ret = 0;
-
-	switch(ucode_id) {
-/* TODO: needs to confirm */
-#if 0
-	case AMDGPU_UCODE_ID_SMC:
-		*sram_offset = 0;
-		*sram_addr_reg_offset = 0;
-		*sram_data_reg_offset = 0;
-		break;
-#endif
-
-	case AMDGPU_UCODE_ID_CP_CE:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_CE_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_CE_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_PFP:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_PFP_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_PFP_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_ME:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_ME_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_ME_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_MEC1:
-		*sram_offset = 0x10000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_MEC_ME1_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_MEC_ME1_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_CP_MEC2:
-		*sram_offset = 0x10000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_MEC2_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmCP_HYP_MEC2_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_RLC_G:
-		*sram_offset = 0x2000;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_UCODE_DATA);
-		break;
-
-	case AMDGPU_UCODE_ID_SDMA0:
-		*sram_offset = 0x0;
-		*sram_addr_reg_offset = SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_UCODE_ADDR);
-		*sram_data_reg_offset = SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_UCODE_DATA);
-		break;
-
-/* TODO: needs to confirm */
-#if 0
-	case AMDGPU_UCODE_ID_SDMA1:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-
-	case AMDGPU_UCODE_ID_UVD:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-
-	case AMDGPU_UCODE_ID_VCE:
-		*sram_offset = ;
-		*sram_addr_reg_offset = ;
-		break;
-#endif
-
-	case AMDGPU_UCODE_ID_MAXIMUM:
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-static bool psp_v3_1_compare_sram_data(struct psp_context *psp,
-				       struct amdgpu_firmware_info *ucode,
-				       enum AMDGPU_UCODE_ID ucode_type)
-{
-	int err = 0;
-	unsigned int fw_sram_reg_val = 0;
-	unsigned int fw_sram_addr_reg_offset = 0;
-	unsigned int fw_sram_data_reg_offset = 0;
-	unsigned int ucode_size;
-	uint32_t *ucode_mem = NULL;
-	struct amdgpu_device *adev = psp->adev;
-
-	err = psp_v3_1_sram_map(adev, &fw_sram_reg_val, &fw_sram_addr_reg_offset,
-				&fw_sram_data_reg_offset, ucode_type);
-	if (err)
-		return false;
-
-	WREG32(fw_sram_addr_reg_offset, fw_sram_reg_val);
-
-	ucode_size = ucode->ucode_size;
-	ucode_mem = (uint32_t *)ucode->kaddr;
-	while (ucode_size) {
-		fw_sram_reg_val = RREG32(fw_sram_data_reg_offset);
-
-		if (*ucode_mem != fw_sram_reg_val)
-			return false;
-
-		ucode_mem++;
-		/* 4 bytes */
-		ucode_size -= 4;
-	}
-
-	return true;
-}
-
 static bool psp_v3_1_smu_reload_quirk(struct psp_context *psp)
 {
 	struct amdgpu_device *adev = psp->adev;
@@ -575,20 +373,12 @@ static int psp_v3_1_mode1_reset(struct psp_context *psp)
 	return 0;
 }
 
-static bool psp_v3_1_support_vmr_ring(struct psp_context *psp)
-{
-	if (amdgpu_sriov_vf(psp->adev))
-		return true;
-
-	return false;
-}
-
 static uint32_t psp_v3_1_ring_get_wptr(struct psp_context *psp)
 {
 	uint32_t data;
 	struct amdgpu_device *adev = psp->adev;
 
-	if (psp_v3_1_support_vmr_ring(psp))
+	if (amdgpu_sriov_vf(adev))
 		data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102);
 	else
 		data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_67);
@@ -599,7 +389,7 @@ static void psp_v3_1_ring_set_wptr(struct psp_context *psp, uint32_t value)
 {
 	struct amdgpu_device *adev = psp->adev;
 
-	if (psp_v3_1_support_vmr_ring(psp)) {
+	if (amdgpu_sriov_vf(adev)) {
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102, value);
 		/* send interrupt to PSP for SRIOV ring write pointer update */
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
@@ -616,10 +406,8 @@ static const struct psp_funcs psp_v3_1_funcs = {
 	.ring_create = psp_v3_1_ring_create,
 	.ring_stop = psp_v3_1_ring_stop,
 	.ring_destroy = psp_v3_1_ring_destroy,
-	.compare_sram_data = psp_v3_1_compare_sram_data,
 	.smu_reload_quirk = psp_v3_1_smu_reload_quirk,
 	.mode1_reset = psp_v3_1_mode1_reset,
-	.support_vmr_ring = psp_v3_1_support_vmr_ring,
 	.ring_get_wptr = psp_v3_1_ring_get_wptr,
 	.ring_set_wptr = psp_v3_1_ring_set_wptr,
 };
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c
index 7d509a40076f..5f304d61999e 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c
@@ -355,8 +355,6 @@ static void sdma_v2_4_gfx_stop(struct amdgpu_device *adev)
 		ib_cntl = REG_SET_FIELD(ib_cntl, SDMA0_GFX_IB_CNTL, IB_ENABLE, 0);
 		WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl);
 	}
-	sdma0->sched.ready = false;
-	sdma1->sched.ready = false;
 }
 
 /**
@@ -614,7 +612,8 @@ static int sdma_v2_4_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	tmp = 0xCAFEDEAD;
 	adev->wb.wb[index] = cpu_to_le32(tmp);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 256, &ib);
+	r = amdgpu_ib_get(adev, NULL, 256,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err0;
 
@@ -874,7 +873,8 @@ static int sdma_v2_4_sw_init(void *handle)
 				     &adev->sdma.trap_irq,
 				     (i == 0) ?
 				     AMDGPU_SDMA_IRQ_INSTANCE0 :
-				     AMDGPU_SDMA_IRQ_INSTANCE1);
+				     AMDGPU_SDMA_IRQ_INSTANCE1,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -1200,7 +1200,8 @@ static void sdma_v2_4_set_irq_funcs(struct amdgpu_device *adev)
 static void sdma_v2_4_emit_copy_buffer(struct amdgpu_ib *ib,
 				       uint64_t src_offset,
 				       uint64_t dst_offset,
-				       uint32_t byte_count)
+				       uint32_t byte_count,
+				       bool tmz)
 {
 	ib->ptr[ib->length_dw++] = SDMA_PKT_HEADER_OP(SDMA_OP_COPY) |
 		SDMA_PKT_HEADER_SUB_OP(SDMA_SUBOP_COPY_LINEAR);
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
index b6109a99fc43..c59f6f6f4c09 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
@@ -529,8 +529,6 @@ static void sdma_v3_0_gfx_stop(struct amdgpu_device *adev)
 		ib_cntl = REG_SET_FIELD(ib_cntl, SDMA0_GFX_IB_CNTL, IB_ENABLE, 0);
 		WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl);
 	}
-	sdma0->sched.ready = false;
-	sdma1->sched.ready = false;
 }
 
 /**
@@ -886,7 +884,8 @@ static int sdma_v3_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	tmp = 0xCAFEDEAD;
 	adev->wb.wb[index] = cpu_to_le32(tmp);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 256, &ib);
+	r = amdgpu_ib_get(adev, NULL, 256,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err0;
 
@@ -1158,7 +1157,8 @@ static int sdma_v3_0_sw_init(void *handle)
 				     &adev->sdma.trap_irq,
 				     (i == 0) ?
 				     AMDGPU_SDMA_IRQ_INSTANCE0 :
-				     AMDGPU_SDMA_IRQ_INSTANCE1);
+				     AMDGPU_SDMA_IRQ_INSTANCE1,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -1638,7 +1638,8 @@ static void sdma_v3_0_set_irq_funcs(struct amdgpu_device *adev)
 static void sdma_v3_0_emit_copy_buffer(struct amdgpu_ib *ib,
 				       uint64_t src_offset,
 				       uint64_t dst_offset,
-				       uint32_t byte_count)
+				       uint32_t byte_count,
+				       bool tmz)
 {
 	ib->ptr[ib->length_dw++] = SDMA_PKT_HEADER_OP(SDMA_OP_COPY) |
 		SDMA_PKT_HEADER_SUB_OP(SDMA_SUBOP_COPY_LINEAR);
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
index 5f3a5ee2a3f4..12a77b31fad2 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
@@ -115,17 +115,21 @@ static const struct soc15_reg_golden golden_settings_sdma_4[] = {
 static const struct soc15_reg_golden golden_settings_sdma_vg10[] = {
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG, 0x0018773f, 0x00104002),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104002),
+	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831d07),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG, 0x0018773f, 0x00104002),
-	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104002)
+	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104002),
+	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 };
 
 static const struct soc15_reg_golden golden_settings_sdma_vg12[] = {
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG, 0x0018773f, 0x00104001),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104001),
+	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831d07),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG, 0x0018773f, 0x00104001),
-	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104001)
+	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104001),
+	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 };
 
 static const struct soc15_reg_golden golden_settings_sdma_4_1[] = {
@@ -174,6 +178,7 @@ static const struct soc15_reg_golden golden_settings_sdma0_4_2[] =
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_RLC7_RB_RPTR_ADDR_LO, 0xfffffffd, 0x00000001),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_RLC7_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_PAGE, 0x000003ff, 0x000003c0),
+	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 };
 
 static const struct soc15_reg_golden golden_settings_sdma1_4_2[] = {
@@ -203,6 +208,7 @@ static const struct soc15_reg_golden golden_settings_sdma1_4_2[] = {
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_RLC7_RB_RPTR_ADDR_LO, 0xfffffffd, 0x00000001),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_RLC7_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_UTCL1_PAGE, 0x000003ff, 0x000003c0),
+	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 };
 
 static const struct soc15_reg_golden golden_settings_sdma_rv1[] =
@@ -222,27 +228,35 @@ static const struct soc15_reg_golden golden_settings_sdma_arct[] =
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),
+	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),
+	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 	SOC15_REG_GOLDEN_VALUE(SDMA2, 0, mmSDMA2_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA2, 0, mmSDMA2_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
 	SOC15_REG_GOLDEN_VALUE(SDMA2, 0, mmSDMA2_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),
+	SOC15_REG_GOLDEN_VALUE(SDMA2, 0, mmSDMA2_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 	SOC15_REG_GOLDEN_VALUE(SDMA3, 0, mmSDMA3_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA3, 0, mmSDMA3_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
 	SOC15_REG_GOLDEN_VALUE(SDMA3, 0, mmSDMA3_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),
+	SOC15_REG_GOLDEN_VALUE(SDMA3, 0, mmSDMA3_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 	SOC15_REG_GOLDEN_VALUE(SDMA4, 0, mmSDMA4_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA4, 0, mmSDMA4_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
 	SOC15_REG_GOLDEN_VALUE(SDMA4, 0, mmSDMA4_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),
+	SOC15_REG_GOLDEN_VALUE(SDMA4, 0, mmSDMA4_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 	SOC15_REG_GOLDEN_VALUE(SDMA5, 0, mmSDMA5_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA5, 0, mmSDMA5_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
 	SOC15_REG_GOLDEN_VALUE(SDMA5, 0, mmSDMA5_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),
+	SOC15_REG_GOLDEN_VALUE(SDMA5, 0, mmSDMA5_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 	SOC15_REG_GOLDEN_VALUE(SDMA6, 0, mmSDMA6_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA6, 0, mmSDMA6_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
 	SOC15_REG_GOLDEN_VALUE(SDMA6, 0, mmSDMA6_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),
+	SOC15_REG_GOLDEN_VALUE(SDMA6, 0, mmSDMA6_UTCL1_TIMEOUT, 0xffffffff, 0x00010001),
 	SOC15_REG_GOLDEN_VALUE(SDMA7, 0, mmSDMA7_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA7, 0, mmSDMA7_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
-	SOC15_REG_GOLDEN_VALUE(SDMA7, 0, mmSDMA7_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002)
+	SOC15_REG_GOLDEN_VALUE(SDMA7, 0, mmSDMA7_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),
+	SOC15_REG_GOLDEN_VALUE(SDMA7, 0, mmSDMA7_UTCL1_TIMEOUT, 0xffffffff, 0x00010001)
 };
 
 static const struct soc15_reg_golden golden_settings_sdma_4_3[] = {
@@ -923,8 +937,6 @@ static void sdma_v4_0_gfx_stop(struct amdgpu_device *adev)
 		ib_cntl = RREG32_SDMA(i, mmSDMA0_GFX_IB_CNTL);
 		ib_cntl = REG_SET_FIELD(ib_cntl, SDMA0_GFX_IB_CNTL, IB_ENABLE, 0);
 		WREG32_SDMA(i, mmSDMA0_GFX_IB_CNTL, ib_cntl);
-
-		sdma[i]->sched.ready = false;
 	}
 }
 
@@ -971,8 +983,6 @@ static void sdma_v4_0_page_stop(struct amdgpu_device *adev)
 		ib_cntl = REG_SET_FIELD(ib_cntl, SDMA0_PAGE_IB_CNTL,
 					IB_ENABLE, 0);
 		WREG32_SDMA(i, mmSDMA0_PAGE_IB_CNTL, ib_cntl);
-
-		sdma[i]->sched.ready = false;
 	}
 }
 
@@ -1062,6 +1072,7 @@ static uint32_t sdma_v4_0_rb_cntl(struct amdgpu_ring *ring, uint32_t rb_cntl)
 	/* Set ring buffer size in dwords */
 	uint32_t rb_bufsz = order_base_2(ring->ring_size / 4);
 
+	barrier(); /* work around https://bugs.llvm.org/show_bug.cgi?id=42576 */
 	rb_cntl = REG_SET_FIELD(rb_cntl, SDMA0_GFX_RB_CNTL, RB_SIZE, rb_bufsz);
 #ifdef __BIG_ENDIAN
 	rb_cntl = REG_SET_FIELD(rb_cntl, SDMA0_GFX_RB_CNTL, RB_SWAP_ENABLE, 1);
@@ -1539,7 +1550,8 @@ static int sdma_v4_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	tmp = 0xCAFEDEAD;
 	adev->wb.wb[index] = cpu_to_le32(tmp);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 256, &ib);
+	r = amdgpu_ib_get(adev, NULL, 256,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err0;
 
@@ -1840,7 +1852,7 @@ static int sdma_v4_0_sw_init(void *handle)
 		ring->ring_obj = NULL;
 		ring->use_doorbell = true;
 
-		DRM_INFO("use_doorbell being set to: [%s]\n",
+		DRM_DEBUG("SDMA %d use_doorbell being set to: [%s]\n", i,
 				ring->use_doorbell?"true":"false");
 
 		/* doorbell size is 2 dwords, get DWORD offset */
@@ -1848,7 +1860,8 @@ static int sdma_v4_0_sw_init(void *handle)
 
 		sprintf(ring->name, "sdma%d", i);
 		r = amdgpu_ring_init(adev, ring, 1024, &adev->sdma.trap_irq,
-				     AMDGPU_SDMA_IRQ_INSTANCE0 + i);
+				     AMDGPU_SDMA_IRQ_INSTANCE0 + i,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 
@@ -1866,7 +1879,8 @@ static int sdma_v4_0_sw_init(void *handle)
 			sprintf(ring->name, "page%d", i);
 			r = amdgpu_ring_init(adev, ring, 1024,
 					     &adev->sdma.trap_irq,
-					     AMDGPU_SDMA_IRQ_INSTANCE0 + i);
+					     AMDGPU_SDMA_IRQ_INSTANCE0 + i,
+					     AMDGPU_RING_PRIO_DEFAULT);
 			if (r)
 				return r;
 		}
@@ -2445,10 +2459,12 @@ static void sdma_v4_0_set_irq_funcs(struct amdgpu_device *adev)
 static void sdma_v4_0_emit_copy_buffer(struct amdgpu_ib *ib,
 				       uint64_t src_offset,
 				       uint64_t dst_offset,
-				       uint32_t byte_count)
+				       uint32_t byte_count,
+				       bool tmz)
 {
 	ib->ptr[ib->length_dw++] = SDMA_PKT_HEADER_OP(SDMA_OP_COPY) |
-		SDMA_PKT_HEADER_SUB_OP(SDMA_SUBOP_COPY_LINEAR);
+		SDMA_PKT_HEADER_SUB_OP(SDMA_SUBOP_COPY_LINEAR) |
+		SDMA_PKT_COPY_LINEAR_HEADER_TMZ(tmz ? 1 : 0);
 	ib->ptr[ib->length_dw++] = byte_count - 1;
 	ib->ptr[ib->length_dw++] = 0; /* src/dst endian swap */
 	ib->ptr[ib->length_dw++] = lower_32_bits(src_offset);
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
index ebfd2cdf4e65..b544baf306f2 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
@@ -88,6 +88,29 @@ static const struct soc15_reg_golden golden_settings_sdma_5[] = {
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_UTCL1_PAGE, 0x00ffffff, 0x000c5c00)
 };
 
+static const struct soc15_reg_golden golden_settings_sdma_5_sriov[] = {
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_GFX_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_PAGE_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC0_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC1_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC2_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC4_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC5_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC6_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC7_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_GFX_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_PAGE_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC0_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC1_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC2_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC4_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC5_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC6_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC7_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+};
+
 static const struct soc15_reg_golden golden_settings_sdma_nv10[] = {
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC3_RB_WPTR_POLL_CNTL, 0x0000fff0, 0x00403000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC3_RB_WPTR_POLL_CNTL, 0x0000fff0, 0x00403000),
@@ -141,9 +164,14 @@ static void sdma_v5_0_init_golden_registers(struct amdgpu_device *adev)
 						(const u32)ARRAY_SIZE(golden_settings_sdma_nv14));
 		break;
 	case CHIP_NAVI12:
-		soc15_program_register_sequence(adev,
-						golden_settings_sdma_5,
-						(const u32)ARRAY_SIZE(golden_settings_sdma_5));
+		if (amdgpu_sriov_vf(adev))
+			soc15_program_register_sequence(adev,
+							golden_settings_sdma_5_sriov,
+							(const u32)ARRAY_SIZE(golden_settings_sdma_5_sriov));
+		else
+			soc15_program_register_sequence(adev,
+							golden_settings_sdma_5,
+							(const u32)ARRAY_SIZE(golden_settings_sdma_5));
 		soc15_program_register_sequence(adev,
 						golden_settings_sdma_nv12,
 						(const u32)ARRAY_SIZE(golden_settings_sdma_nv12));
@@ -382,6 +410,18 @@ static void sdma_v5_0_ring_emit_ib(struct amdgpu_ring *ring,
 	unsigned vmid = AMDGPU_JOB_GET_VMID(job);
 	uint64_t csa_mc_addr = amdgpu_sdma_get_csa_mc_addr(ring, vmid);
 
+	/* Invalidate L2, because if we don't do it, we might get stale cache
+	 * lines from previous IBs.
+	 */
+	amdgpu_ring_write(ring, SDMA_PKT_HEADER_OP(SDMA_OP_GCR_REQ));
+	amdgpu_ring_write(ring, 0);
+	amdgpu_ring_write(ring, (SDMA_GCR_GL2_INV |
+				 SDMA_GCR_GL2_WB |
+				 SDMA_GCR_GLM_INV |
+				 SDMA_GCR_GLM_WB) << 16);
+	amdgpu_ring_write(ring, 0xffffff80);
+	amdgpu_ring_write(ring, 0xffff);
+
 	/* An IB packet must end on a 8 DW boundary--the next dword
 	 * must be on a 8-dword boundary. Our IB packet below is 6
 	 * dwords long, thus add x number of NOPs, such that, in
@@ -502,9 +542,6 @@ static void sdma_v5_0_gfx_stop(struct amdgpu_device *adev)
 		ib_cntl = REG_SET_FIELD(ib_cntl, SDMA0_GFX_IB_CNTL, IB_ENABLE, 0);
 		WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_GFX_IB_CNTL), ib_cntl);
 	}
-
-	sdma0->sched.ready = false;
-	sdma1->sched.ready = false;
 }
 
 /**
@@ -529,7 +566,7 @@ static void sdma_v5_0_rlc_stop(struct amdgpu_device *adev)
  */
 static void sdma_v5_0_ctx_switch_enable(struct amdgpu_device *adev, bool enable)
 {
-	u32 f32_cntl, phase_quantum = 0;
+	u32 f32_cntl = 0, phase_quantum = 0;
 	int i;
 
 	if (amdgpu_sdma_phase_quantum) {
@@ -557,9 +594,12 @@ static void sdma_v5_0_ctx_switch_enable(struct amdgpu_device *adev, bool enable)
 	}
 
 	for (i = 0; i < adev->sdma.num_instances; i++) {
-		f32_cntl = RREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_CNTL));
-		f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_CNTL,
-				AUTO_CTXSW_ENABLE, enable ? 1 : 0);
+		if (!amdgpu_sriov_vf(adev)) {
+			f32_cntl = RREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_CNTL));
+			f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_CNTL,
+						 AUTO_CTXSW_ENABLE, enable ? 1 : 0);
+		}
+
 		if (enable && amdgpu_sdma_phase_quantum) {
 			WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_PHASE0_QUANTUM),
 			       phase_quantum);
@@ -568,7 +608,8 @@ static void sdma_v5_0_ctx_switch_enable(struct amdgpu_device *adev, bool enable)
 			WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_PHASE2_QUANTUM),
 			       phase_quantum);
 		}
-		WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_CNTL), f32_cntl);
+		if (!amdgpu_sriov_vf(adev))
+			WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_CNTL), f32_cntl);
 	}
 
 }
@@ -591,6 +632,9 @@ static void sdma_v5_0_enable(struct amdgpu_device *adev, bool enable)
 		sdma_v5_0_rlc_stop(adev);
 	}
 
+	if (amdgpu_sriov_vf(adev))
+		return;
+
 	for (i = 0; i < adev->sdma.num_instances; i++) {
 		f32_cntl = RREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_F32_CNTL));
 		f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_F32_CNTL, HALT, enable ? 0 : 1);
@@ -623,7 +667,8 @@ static int sdma_v5_0_gfx_resume(struct amdgpu_device *adev)
 		ring = &adev->sdma.instance[i].ring;
 		wb_offset = (ring->rptr_offs * 4);
 
-		WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_SEM_WAIT_FAIL_TIMER_CNTL), 0);
+		if (!amdgpu_sriov_vf(adev))
+			WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_SEM_WAIT_FAIL_TIMER_CNTL), 0);
 
 		/* Set ring buffer size in dwords */
 		rb_bufsz = order_base_2(ring->ring_size / 4);
@@ -699,26 +744,28 @@ static int sdma_v5_0_gfx_resume(struct amdgpu_device *adev)
 		/* set minor_ptr_update to 0 after wptr programed */
 		WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_GFX_MINOR_PTR_UPDATE), 0);
 
-		/* set utc l1 enable flag always to 1 */
-		temp = RREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_CNTL));
-		temp = REG_SET_FIELD(temp, SDMA0_CNTL, UTC_L1_ENABLE, 1);
-
-		/* enable MCBP */
-		temp = REG_SET_FIELD(temp, SDMA0_CNTL, MIDCMD_PREEMPT_ENABLE, 1);
-		WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_CNTL), temp);
-
-		/* Set up RESP_MODE to non-copy addresses */
-		temp = RREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_UTCL1_CNTL));
-		temp = REG_SET_FIELD(temp, SDMA0_UTCL1_CNTL, RESP_MODE, 3);
-		temp = REG_SET_FIELD(temp, SDMA0_UTCL1_CNTL, REDO_DELAY, 9);
-		WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_UTCL1_CNTL), temp);
-
-		/* program default cache read and write policy */
-		temp = RREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_UTCL1_PAGE));
-		/* clean read policy and write policy bits */
-		temp &= 0xFF0FFF;
-		temp |= ((CACHE_READ_POLICY_L2__DEFAULT << 12) | (CACHE_WRITE_POLICY_L2__DEFAULT << 14));
-		WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_UTCL1_PAGE), temp);
+		if (!amdgpu_sriov_vf(adev)) {
+			/* set utc l1 enable flag always to 1 */
+			temp = RREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_CNTL));
+			temp = REG_SET_FIELD(temp, SDMA0_CNTL, UTC_L1_ENABLE, 1);
+
+			/* enable MCBP */
+			temp = REG_SET_FIELD(temp, SDMA0_CNTL, MIDCMD_PREEMPT_ENABLE, 1);
+			WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_CNTL), temp);
+
+			/* Set up RESP_MODE to non-copy addresses */
+			temp = RREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_UTCL1_CNTL));
+			temp = REG_SET_FIELD(temp, SDMA0_UTCL1_CNTL, RESP_MODE, 3);
+			temp = REG_SET_FIELD(temp, SDMA0_UTCL1_CNTL, REDO_DELAY, 9);
+			WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_UTCL1_CNTL), temp);
+
+			/* program default cache read and write policy */
+			temp = RREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_UTCL1_PAGE));
+			/* clean read policy and write policy bits */
+			temp &= 0xFF0FFF;
+			temp |= ((CACHE_READ_POLICY_L2__DEFAULT << 12) | (CACHE_WRITE_POLICY_L2__DEFAULT << 14));
+			WREG32(sdma_v5_0_get_reg_offset(adev, i, mmSDMA0_UTCL1_PAGE), temp);
+		}
 
 		if (!amdgpu_sriov_vf(adev)) {
 			/* unhalt engine */
@@ -948,7 +995,8 @@ static int sdma_v5_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	tmp = 0xCAFEDEAD;
 	adev->wb.wb[index] = cpu_to_le32(tmp);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 256, &ib);
+	r = amdgpu_ib_get(adev, NULL, 256,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r) {
 		DRM_ERROR("amdgpu: failed to get ib (%ld).\n", r);
 		goto err0;
@@ -1224,7 +1272,7 @@ static int sdma_v5_0_sw_init(void *handle)
 		ring->ring_obj = NULL;
 		ring->use_doorbell = true;
 
-		DRM_INFO("use_doorbell being set to: [%s]\n",
+		DRM_DEBUG("SDMA %d use_doorbell being set to: [%s]\n", i,
 				ring->use_doorbell?"true":"false");
 
 		ring->doorbell_index = (i == 0) ?
@@ -1236,7 +1284,8 @@ static int sdma_v5_0_sw_init(void *handle)
 				     &adev->sdma.trap_irq,
 				     (i == 0) ?
 				     AMDGPU_SDMA_IRQ_INSTANCE0 :
-				     AMDGPU_SDMA_IRQ_INSTANCE1);
+				     AMDGPU_SDMA_IRQ_INSTANCE1,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -1387,14 +1436,16 @@ static int sdma_v5_0_set_trap_irq_state(struct amdgpu_device *adev,
 {
 	u32 sdma_cntl;
 
-	u32 reg_offset = (type == AMDGPU_SDMA_IRQ_INSTANCE0) ?
-		sdma_v5_0_get_reg_offset(adev, 0, mmSDMA0_CNTL) :
-		sdma_v5_0_get_reg_offset(adev, 1, mmSDMA0_CNTL);
+	if (!amdgpu_sriov_vf(adev)) {
+		u32 reg_offset = (type == AMDGPU_SDMA_IRQ_INSTANCE0) ?
+			sdma_v5_0_get_reg_offset(adev, 0, mmSDMA0_CNTL) :
+			sdma_v5_0_get_reg_offset(adev, 1, mmSDMA0_CNTL);
 
-	sdma_cntl = RREG32(reg_offset);
-	sdma_cntl = REG_SET_FIELD(sdma_cntl, SDMA0_CNTL, TRAP_ENABLE,
-		       state == AMDGPU_IRQ_STATE_ENABLE ? 1 : 0);
-	WREG32(reg_offset, sdma_cntl);
+		sdma_cntl = RREG32(reg_offset);
+		sdma_cntl = REG_SET_FIELD(sdma_cntl, SDMA0_CNTL, TRAP_ENABLE,
+					  state == AMDGPU_IRQ_STATE_ENABLE ? 1 : 0);
+		WREG32(reg_offset, sdma_cntl);
+	}
 
 	return 0;
 }
@@ -1595,7 +1646,7 @@ static const struct amdgpu_ring_funcs sdma_v5_0_ring_funcs = {
 		SOC15_FLUSH_GPU_TLB_NUM_WREG * 3 +
 		SOC15_FLUSH_GPU_TLB_NUM_REG_WAIT * 6 * 2 +
 		10 + 10 + 10, /* sdma_v5_0_ring_emit_fence x3 for user fence, vm fence */
-	.emit_ib_size = 7 + 6, /* sdma_v5_0_ring_emit_ib */
+	.emit_ib_size = 5 + 7 + 6, /* sdma_v5_0_ring_emit_ib */
 	.emit_ib = sdma_v5_0_ring_emit_ib,
 	.emit_fence = sdma_v5_0_ring_emit_fence,
 	.emit_pipeline_sync = sdma_v5_0_ring_emit_pipeline_sync,
@@ -1655,10 +1706,12 @@ static void sdma_v5_0_set_irq_funcs(struct amdgpu_device *adev)
 static void sdma_v5_0_emit_copy_buffer(struct amdgpu_ib *ib,
 				       uint64_t src_offset,
 				       uint64_t dst_offset,
-				       uint32_t byte_count)
+				       uint32_t byte_count,
+				       bool tmz)
 {
 	ib->ptr[ib->length_dw++] = SDMA_PKT_HEADER_OP(SDMA_OP_COPY) |
-		SDMA_PKT_HEADER_SUB_OP(SDMA_SUBOP_COPY_LINEAR);
+		SDMA_PKT_HEADER_SUB_OP(SDMA_SUBOP_COPY_LINEAR) |
+		SDMA_PKT_COPY_LINEAR_HEADER_TMZ(tmz ? 1 : 0);
 	ib->ptr[ib->length_dw++] = byte_count - 1;
 	ib->ptr[ib->length_dw++] = 0; /* src/dst endian swap */
 	ib->ptr[ib->length_dw++] = lower_32_bits(src_offset);
diff --git a/drivers/gpu/drm/amd/amdgpu/si.c b/drivers/gpu/drm/amd/amdgpu/si.c
index 4d415bfdb42f..153db3f763bc 100644
--- a/drivers/gpu/drm/amd/amdgpu/si.c
+++ b/drivers/gpu/drm/amd/amdgpu/si.c
@@ -1249,12 +1249,6 @@ static int si_set_uvd_clocks(struct amdgpu_device *adev, u32 vclk, u32 dclk)
 	return 0;
 }
 
-static void si_detect_hw_virtualization(struct amdgpu_device *adev)
-{
-	if (is_virtual_machine()) /* passthrough mode */
-		adev->virt.caps |= AMDGPU_PASSTHROUGH_MODE;
-}
-
 static void si_flush_hdp(struct amdgpu_device *adev, struct amdgpu_ring *ring)
 {
 	if (!ring || !ring->funcs->emit_wreg) {
@@ -2165,8 +2159,6 @@ static const struct amdgpu_ip_block_version si_common_ip_block =
 
 int si_set_ip_blocks(struct amdgpu_device *adev)
 {
-	si_detect_hw_virtualization(adev);
-
 	switch (adev->asic_type) {
 	case CHIP_VERDE:
 	case CHIP_TAHITI:
diff --git a/drivers/gpu/drm/amd/amdgpu/si_dma.c b/drivers/gpu/drm/amd/amdgpu/si_dma.c
index 42d5601b6bf3..7d2bbcbe547b 100644
--- a/drivers/gpu/drm/amd/amdgpu/si_dma.c
+++ b/drivers/gpu/drm/amd/amdgpu/si_dma.c
@@ -124,7 +124,6 @@ static void si_dma_stop(struct amdgpu_device *adev)
 
 		if (adev->mman.buffer_funcs_ring == ring)
 			amdgpu_ttm_set_buffer_funcs_status(adev, false);
-		ring->sched.ready = false;
 	}
 }
 
@@ -267,7 +266,8 @@ static int si_dma_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	tmp = 0xCAFEDEAD;
 	adev->wb.wb[index] = cpu_to_le32(tmp);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 256, &ib);
+	r = amdgpu_ib_get(adev, NULL, 256,
+					AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err0;
 
@@ -504,7 +504,8 @@ static int si_dma_sw_init(void *handle)
 				     &adev->sdma.trap_irq,
 				     (i == 0) ?
 				     AMDGPU_SDMA_IRQ_INSTANCE0 :
-				     AMDGPU_SDMA_IRQ_INSTANCE1);
+				     AMDGPU_SDMA_IRQ_INSTANCE1,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -775,7 +776,8 @@ static void si_dma_set_irq_funcs(struct amdgpu_device *adev)
 static void si_dma_emit_copy_buffer(struct amdgpu_ib *ib,
 				       uint64_t src_offset,
 				       uint64_t dst_offset,
-				       uint32_t byte_count)
+				       uint32_t byte_count,
+				       bool tmz)
 {
 	ib->ptr[ib->length_dw++] = DMA_PACKET(DMA_PACKET_COPY,
 					      1, 0, 0, byte_count);
diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c
index 0860e85a2d35..c00ba4b23c9a 100644
--- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c
+++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c
@@ -345,26 +345,6 @@ static const struct si_dte_data dte_data_tahiti =
 	false
 };
 
-#if 0
-static const struct si_dte_data dte_data_tahiti_le =
-{
-	{ 0x1E8480, 0x7A1200, 0x2160EC0, 0x3938700, 0 },
-	{ 0x7D, 0x7D, 0x4E4, 0xB00, 0 },
-	0x5,
-	0xAFC8,
-	0x64,
-	0x32,
-	1,
-	0,
-	0x10,
-	{ 0x78, 0x7C, 0x82, 0x88, 0x8E, 0x94, 0x9A, 0xA0, 0xA6, 0xAC, 0xB0, 0xB4, 0xB8, 0xBC, 0xC0, 0xC4 },
-	{ 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700 },
-	{ 0x2AF8, 0x2AF8, 0x29BB, 0x27F9, 0x2637, 0x2475, 0x22B3, 0x20F1, 0x1F2F, 0x1D6D, 0x1734, 0x1414, 0x10F4, 0xDD4, 0xAB4, 0x794 },
-	85,
-	true
-};
-#endif
-
 static const struct si_dte_data dte_data_tahiti_pro =
 {
 	{ 0x1E8480, 0x3D0900, 0x989680, 0x2625A00, 0x0 },
diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c
index d42a8d8a0dea..58a440a15525 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -708,7 +708,6 @@ int soc15_set_ip_blocks(struct amdgpu_device *adev)
 		adev->df.funcs = &df_v1_7_funcs;
 
 	adev->rev_id = soc15_get_rev_id(adev);
-	adev->nbio.funcs->detect_hw_virt(adev);
 
 	if (amdgpu_sriov_vf(adev))
 		adev->virt.ops = &xgpu_ai_virt_ops;
@@ -1218,7 +1217,7 @@ static int soc15_common_early_init(void *handle)
 			AMD_CG_SUPPORT_IH_CG |
 			AMD_CG_SUPPORT_VCN_MGCG |
 			AMD_CG_SUPPORT_JPEG_MGCG;
-		adev->pg_flags = 0;
+		adev->pg_flags = AMD_PG_SUPPORT_VCN | AMD_PG_SUPPORT_VCN_DPG;
 		adev->external_rev_id = adev->rev_id + 0x32;
 		break;
 	case CHIP_RENOIR:
diff --git a/drivers/gpu/drm/amd/amdgpu/soc15_common.h b/drivers/gpu/drm/amd/amdgpu/soc15_common.h
index c893c645a4b2..56d02aa690a7 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15_common.h
+++ b/drivers/gpu/drm/amd/amdgpu/soc15_common.h
@@ -35,6 +35,9 @@
 #define RREG32_SOC15(ip, inst, reg) \
 	RREG32(adev->reg_offset[ip##_HWIP][inst][reg##_BASE_IDX] + reg)
 
+#define RREG32_SOC15_NO_KIQ(ip, inst, reg) \
+	RREG32_NO_KIQ(adev->reg_offset[ip##_HWIP][inst][reg##_BASE_IDX] + reg)
+
 #define RREG32_SOC15_OFFSET(ip, inst, reg, offset) \
 	RREG32((adev->reg_offset[ip##_HWIP][inst][reg##_BASE_IDX] + reg) + offset)
 
diff --git a/drivers/gpu/drm/amd/amdgpu/soc15d.h b/drivers/gpu/drm/amd/amdgpu/soc15d.h
index edfe50821cd9..799925d22fc8 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15d.h
+++ b/drivers/gpu/drm/amd/amdgpu/soc15d.h
@@ -253,7 +253,30 @@
 #              define PACKET3_DMA_DATA_CMD_SAIC    (1 << 28)
 #              define PACKET3_DMA_DATA_CMD_DAIC    (1 << 29)
 #              define PACKET3_DMA_DATA_CMD_RAW_WAIT  (1 << 30)
-#define	PACKET3_AQUIRE_MEM				0x58
+#define	PACKET3_ACQUIRE_MEM				0x58
+/* 1.  HEADER
+ * 2.  COHER_CNTL [30:0]
+ * 2.1 ENGINE_SEL [31:31]
+ * 3.  COHER_SIZE [31:0]
+ * 4.  COHER_SIZE_HI [7:0]
+ * 5.  COHER_BASE_LO [31:0]
+ * 6.  COHER_BASE_HI [23:0]
+ * 7.  POLL_INTERVAL [15:0]
+ */
+/* COHER_CNTL fields for CP_COHER_CNTL */
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TC_NC_ACTION_ENA(x) ((x) << 3)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TC_WC_ACTION_ENA(x) ((x) << 4)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TC_INV_METADATA_ACTION_ENA(x) ((x) << 5)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TCL1_VOL_ACTION_ENA(x) ((x) << 15)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TC_WB_ACTION_ENA(x) ((x) << 18)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TCL1_ACTION_ENA(x) ((x) << 22)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_TC_ACTION_ENA(x) ((x) << 23)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_CB_ACTION_ENA(x) ((x) << 25)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_DB_ACTION_ENA(x) ((x) << 26)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_SH_KCACHE_ACTION_ENA(x) ((x) << 27)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_SH_KCACHE_VOL_ACTION_ENA(x) ((x) << 28)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_SH_ICACHE_ACTION_ENA(x) ((x) << 29)
+#define 	PACKET3_ACQUIRE_MEM_CP_COHER_CNTL_SH_KCACHE_WB_ACTION_ENA(x) ((x) << 30)
 #define	PACKET3_REWIND					0x59
 #define	PACKET3_LOAD_UCONFIG_REG			0x5E
 #define	PACKET3_LOAD_SH_REG				0x5F
@@ -286,6 +309,7 @@
 #define	PACKET3_WAIT_ON_DE_COUNTER_DIFF			0x88
 #define	PACKET3_SWITCH_BUFFER				0x8B
 #define PACKET3_FRAME_CONTROL				0x90
+#			define FRAME_TMZ	(1 << 0)
 #			define FRAME_CMD(x) ((x) << 28)
 			/*
 			 * x=0: tmz_begin
diff --git a/drivers/gpu/drm/amd/amdgpu/umc_v6_1.c b/drivers/gpu/drm/amd/amdgpu/umc_v6_1.c
index 14d346321a5f..418cf097c918 100644
--- a/drivers/gpu/drm/amd/amdgpu/umc_v6_1.c
+++ b/drivers/gpu/drm/amd/amdgpu/umc_v6_1.c
@@ -56,24 +56,43 @@ const uint32_t
 
 static void umc_v6_1_enable_umc_index_mode(struct amdgpu_device *adev)
 {
-	WREG32_FIELD15(RSMU, 0, RSMU_UMC_INDEX_REGISTER_NBIF_VG20_GPU,
+	uint32_t rsmu_umc_addr, rsmu_umc_val;
+
+	rsmu_umc_addr = SOC15_REG_OFFSET(RSMU, 0,
+			mmRSMU_UMC_INDEX_REGISTER_NBIF_VG20_GPU);
+	rsmu_umc_val = RREG32_PCIE(rsmu_umc_addr * 4);
+
+	rsmu_umc_val = REG_SET_FIELD(rsmu_umc_val,
+			RSMU_UMC_INDEX_REGISTER_NBIF_VG20_GPU,
 			RSMU_UMC_INDEX_MODE_EN, 1);
+
+	WREG32_PCIE(rsmu_umc_addr * 4, rsmu_umc_val);
 }
 
 static void umc_v6_1_disable_umc_index_mode(struct amdgpu_device *adev)
 {
-	WREG32_FIELD15(RSMU, 0, RSMU_UMC_INDEX_REGISTER_NBIF_VG20_GPU,
+	uint32_t rsmu_umc_addr, rsmu_umc_val;
+
+	rsmu_umc_addr = SOC15_REG_OFFSET(RSMU, 0,
+			mmRSMU_UMC_INDEX_REGISTER_NBIF_VG20_GPU);
+	rsmu_umc_val = RREG32_PCIE(rsmu_umc_addr * 4);
+
+	rsmu_umc_val = REG_SET_FIELD(rsmu_umc_val,
+			RSMU_UMC_INDEX_REGISTER_NBIF_VG20_GPU,
 			RSMU_UMC_INDEX_MODE_EN, 0);
+
+	WREG32_PCIE(rsmu_umc_addr * 4, rsmu_umc_val);
 }
 
 static uint32_t umc_v6_1_get_umc_index_mode_state(struct amdgpu_device *adev)
 {
-	uint32_t rsmu_umc_index;
+	uint32_t rsmu_umc_addr, rsmu_umc_val;
 
-	rsmu_umc_index = RREG32_SOC15(RSMU, 0,
+	rsmu_umc_addr = SOC15_REG_OFFSET(RSMU, 0,
 			mmRSMU_UMC_INDEX_REGISTER_NBIF_VG20_GPU);
+	rsmu_umc_val = RREG32_PCIE(rsmu_umc_addr * 4);
 
-	return REG_GET_FIELD(rsmu_umc_index,
+	return REG_GET_FIELD(rsmu_umc_val,
 			RSMU_UMC_INDEX_REGISTER_NBIF_VG20_GPU,
 			RSMU_UMC_INDEX_MODE_EN);
 }
@@ -85,6 +104,81 @@ static inline uint32_t get_umc_6_reg_offset(struct amdgpu_device *adev,
 	return adev->umc.channel_offs*ch_inst + UMC_6_INST_DIST*umc_inst;
 }
 
+static void umc_v6_1_clear_error_count_per_channel(struct amdgpu_device *adev,
+					uint32_t umc_reg_offset)
+{
+	uint32_t ecc_err_cnt_addr;
+	uint32_t ecc_err_cnt_sel, ecc_err_cnt_sel_addr;
+
+	if (adev->asic_type == CHIP_ARCTURUS) {
+		/* UMC 6_1_2 registers */
+		ecc_err_cnt_sel_addr =
+			SOC15_REG_OFFSET(UMC, 0,
+					mmUMCCH0_0_EccErrCntSel_ARCT);
+		ecc_err_cnt_addr =
+			SOC15_REG_OFFSET(UMC, 0,
+					mmUMCCH0_0_EccErrCnt_ARCT);
+	} else {
+		/* UMC 6_1_1 registers */
+		ecc_err_cnt_sel_addr =
+			SOC15_REG_OFFSET(UMC, 0,
+					mmUMCCH0_0_EccErrCntSel);
+		ecc_err_cnt_addr =
+			SOC15_REG_OFFSET(UMC, 0,
+					mmUMCCH0_0_EccErrCnt);
+	}
+
+	/* select the lower chip */
+	ecc_err_cnt_sel = RREG32_PCIE((ecc_err_cnt_sel_addr +
+					umc_reg_offset) * 4);
+	ecc_err_cnt_sel = REG_SET_FIELD(ecc_err_cnt_sel,
+					UMCCH0_0_EccErrCntSel,
+					EccErrCntCsSel, 0);
+	WREG32_PCIE((ecc_err_cnt_sel_addr + umc_reg_offset) * 4,
+			ecc_err_cnt_sel);
+
+	/* clear lower chip error count */
+	WREG32_PCIE((ecc_err_cnt_addr + umc_reg_offset) * 4,
+			UMC_V6_1_CE_CNT_INIT);
+
+	/* select the higher chip */
+	ecc_err_cnt_sel = RREG32_PCIE((ecc_err_cnt_sel_addr +
+					umc_reg_offset) * 4);
+	ecc_err_cnt_sel = REG_SET_FIELD(ecc_err_cnt_sel,
+					UMCCH0_0_EccErrCntSel,
+					EccErrCntCsSel, 1);
+	WREG32_PCIE((ecc_err_cnt_sel_addr + umc_reg_offset) * 4,
+			ecc_err_cnt_sel);
+
+	/* clear higher chip error count */
+	WREG32_PCIE((ecc_err_cnt_addr + umc_reg_offset) * 4,
+			UMC_V6_1_CE_CNT_INIT);
+}
+
+static void umc_v6_1_clear_error_count(struct amdgpu_device *adev)
+{
+	uint32_t umc_inst        = 0;
+	uint32_t ch_inst         = 0;
+	uint32_t umc_reg_offset  = 0;
+	uint32_t rsmu_umc_index_state =
+				umc_v6_1_get_umc_index_mode_state(adev);
+
+	if (rsmu_umc_index_state)
+		umc_v6_1_disable_umc_index_mode(adev);
+
+	LOOP_UMC_INST_AND_CH(umc_inst, ch_inst) {
+		umc_reg_offset = get_umc_6_reg_offset(adev,
+						umc_inst,
+						ch_inst);
+
+		umc_v6_1_clear_error_count_per_channel(adev,
+						umc_reg_offset);
+	}
+
+	if (rsmu_umc_index_state)
+		umc_v6_1_enable_umc_index_mode(adev);
+}
+
 static void umc_v6_1_query_correctable_error_count(struct amdgpu_device *adev,
 						   uint32_t umc_reg_offset,
 						   unsigned long *error_count)
@@ -117,23 +211,21 @@ static void umc_v6_1_query_correctable_error_count(struct amdgpu_device *adev,
 	ecc_err_cnt_sel = REG_SET_FIELD(ecc_err_cnt_sel, UMCCH0_0_EccErrCntSel,
 					EccErrCntCsSel, 0);
 	WREG32_PCIE((ecc_err_cnt_sel_addr + umc_reg_offset) * 4, ecc_err_cnt_sel);
+
 	ecc_err_cnt = RREG32_PCIE((ecc_err_cnt_addr + umc_reg_offset) * 4);
 	*error_count +=
 		(REG_GET_FIELD(ecc_err_cnt, UMCCH0_0_EccErrCnt, EccErrCnt) -
 		 UMC_V6_1_CE_CNT_INIT);
-	/* clear the lower chip err count */
-	WREG32_PCIE((ecc_err_cnt_addr + umc_reg_offset) * 4, UMC_V6_1_CE_CNT_INIT);
 
 	/* select the higher chip and check the err counter */
 	ecc_err_cnt_sel = REG_SET_FIELD(ecc_err_cnt_sel, UMCCH0_0_EccErrCntSel,
 					EccErrCntCsSel, 1);
 	WREG32_PCIE((ecc_err_cnt_sel_addr + umc_reg_offset) * 4, ecc_err_cnt_sel);
+
 	ecc_err_cnt = RREG32_PCIE((ecc_err_cnt_addr + umc_reg_offset) * 4);
 	*error_count +=
 		(REG_GET_FIELD(ecc_err_cnt, UMCCH0_0_EccErrCnt, EccErrCnt) -
 		 UMC_V6_1_CE_CNT_INIT);
-	/* clear the higher chip err count */
-	WREG32_PCIE((ecc_err_cnt_addr + umc_reg_offset) * 4, UMC_V6_1_CE_CNT_INIT);
 
 	/* check for SRAM correctable error
 	  MCUMC_STATUS is a 64 bit register */
@@ -209,6 +301,8 @@ static void umc_v6_1_query_ras_error_count(struct amdgpu_device *adev,
 
 	if (rsmu_umc_index_state)
 		umc_v6_1_enable_umc_index_mode(adev);
+
+	umc_v6_1_clear_error_count(adev);
 }
 
 static void umc_v6_1_query_error_address(struct amdgpu_device *adev,
diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c b/drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c
index 82abd8e728ab..3cafba726587 100644
--- a/drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c
@@ -118,7 +118,8 @@ static int uvd_v4_2_sw_init(void *handle)
 
 	ring = &adev->uvd.inst->ring;
 	sprintf(ring->name, "uvd");
-	r = amdgpu_ring_init(adev, ring, 512, &adev->uvd.inst->irq, 0);
+	r = amdgpu_ring_init(adev, ring, 512, &adev->uvd.inst->irq, 0,
+			     AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		return r;
 
@@ -210,13 +211,10 @@ static int uvd_v4_2_hw_init(void *handle)
 static int uvd_v4_2_hw_fini(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	struct amdgpu_ring *ring = &adev->uvd.inst->ring;
 
 	if (RREG32(mmUVD_STATUS) != 0)
 		uvd_v4_2_stop(adev);
 
-	ring->sched.ready = false;
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c b/drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c
index 0fa8aae2d78e..a566ff926e90 100644
--- a/drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c
@@ -116,7 +116,8 @@ static int uvd_v5_0_sw_init(void *handle)
 
 	ring = &adev->uvd.inst->ring;
 	sprintf(ring->name, "uvd");
-	r = amdgpu_ring_init(adev, ring, 512, &adev->uvd.inst->irq, 0);
+	r = amdgpu_ring_init(adev, ring, 512, &adev->uvd.inst->irq, 0,
+			     AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		return r;
 
@@ -208,13 +209,10 @@ static int uvd_v5_0_hw_init(void *handle)
 static int uvd_v5_0_hw_fini(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	struct amdgpu_ring *ring = &adev->uvd.inst->ring;
 
 	if (RREG32(mmUVD_STATUS) != 0)
 		uvd_v5_0_stop(adev);
 
-	ring->sched.ready = false;
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c b/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c
index e0aadcaf6c8b..0a880bc101b8 100644
--- a/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c
@@ -216,7 +216,8 @@ static int uvd_v6_0_enc_get_create_msg(struct amdgpu_ring *ring, uint32_t handle
 	uint64_t addr;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4,
+					AMDGPU_IB_POOL_DIRECT, &job);
 	if (r)
 		return r;
 
@@ -279,7 +280,8 @@ static int uvd_v6_0_enc_get_destroy_msg(struct amdgpu_ring *ring,
 	uint64_t addr;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4,
+					AMDGPU_IB_POOL_DIRECT, &job);
 	if (r)
 		return r;
 
@@ -416,7 +418,8 @@ static int uvd_v6_0_sw_init(void *handle)
 
 	ring = &adev->uvd.inst->ring;
 	sprintf(ring->name, "uvd");
-	r = amdgpu_ring_init(adev, ring, 512, &adev->uvd.inst->irq, 0);
+	r = amdgpu_ring_init(adev, ring, 512, &adev->uvd.inst->irq, 0,
+			     AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		return r;
 
@@ -428,7 +431,9 @@ static int uvd_v6_0_sw_init(void *handle)
 		for (i = 0; i < adev->uvd.num_enc_rings; ++i) {
 			ring = &adev->uvd.inst->ring_enc[i];
 			sprintf(ring->name, "uvd_enc%d", i);
-			r = amdgpu_ring_init(adev, ring, 512, &adev->uvd.inst->irq, 0);
+			r = amdgpu_ring_init(adev, ring, 512,
+					     &adev->uvd.inst->irq, 0,
+					     AMDGPU_RING_PRIO_DEFAULT);
 			if (r)
 				return r;
 		}
@@ -535,13 +540,10 @@ static int uvd_v6_0_hw_init(void *handle)
 static int uvd_v6_0_hw_fini(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	struct amdgpu_ring *ring = &adev->uvd.inst->ring;
 
 	if (RREG32(mmUVD_STATUS) != 0)
 		uvd_v6_0_stop(adev);
 
-	ring->sched.ready = false;
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c b/drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c
index 0995378d8263..7a55457e6f9e 100644
--- a/drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c
@@ -224,7 +224,8 @@ static int uvd_v7_0_enc_get_create_msg(struct amdgpu_ring *ring, uint32_t handle
 	uint64_t addr;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4,
+					AMDGPU_IB_POOL_DIRECT, &job);
 	if (r)
 		return r;
 
@@ -286,7 +287,8 @@ static int uvd_v7_0_enc_get_destroy_msg(struct amdgpu_ring *ring, uint32_t handl
 	uint64_t addr;
 	int i, r;
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
+	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4,
+					AMDGPU_IB_POOL_DIRECT, &job);
 	if (r)
 		return r;
 
@@ -450,7 +452,9 @@ static int uvd_v7_0_sw_init(void *handle)
 		if (!amdgpu_sriov_vf(adev)) {
 			ring = &adev->uvd.inst[j].ring;
 			sprintf(ring->name, "uvd_%d", ring->me);
-			r = amdgpu_ring_init(adev, ring, 512, &adev->uvd.inst[j].irq, 0);
+			r = amdgpu_ring_init(adev, ring, 512,
+					     &adev->uvd.inst[j].irq, 0,
+					     AMDGPU_RING_PRIO_DEFAULT);
 			if (r)
 				return r;
 		}
@@ -469,7 +473,9 @@ static int uvd_v7_0_sw_init(void *handle)
 				else
 					ring->doorbell_index = adev->doorbell_index.uvd_vce.uvd_ring2_3 * 2 + 1;
 			}
-			r = amdgpu_ring_init(adev, ring, 512, &adev->uvd.inst[j].irq, 0);
+			r = amdgpu_ring_init(adev, ring, 512,
+					     &adev->uvd.inst[j].irq, 0,
+					     AMDGPU_RING_PRIO_DEFAULT);
 			if (r)
 				return r;
 		}
@@ -598,7 +604,6 @@ static int uvd_v7_0_hw_init(void *handle)
 static int uvd_v7_0_hw_fini(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	int i;
 
 	if (!amdgpu_sriov_vf(adev))
 		uvd_v7_0_stop(adev);
@@ -607,12 +612,6 @@ static int uvd_v7_0_hw_fini(void *handle)
 		DRM_DEBUG("For SRIOV client, shouldn't do anything.\n");
 	}
 
-	for (i = 0; i < adev->uvd.num_uvd_inst; ++i) {
-		if (adev->uvd.harvest_config & (1 << i))
-			continue;
-		adev->uvd.inst[i].ring.sched.ready = false;
-	}
-
 	return 0;
 }
 
@@ -1694,7 +1693,7 @@ static int uvd_v7_0_set_clockgating_state(void *handle,
 					  enum amd_clockgating_state state)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	bool enable = (state == AMD_CG_STATE_GATE) ? true : false;
+	bool enable = (state == AMD_CG_STATE_GATE);
 
 	uvd_v7_0_set_bypass_mode(adev, enable);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c
index b6837fcfdba7..0e2945baf0f1 100644
--- a/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c
@@ -434,7 +434,8 @@ static int vce_v2_0_sw_init(void *handle)
 		ring = &adev->vce.ring[i];
 		sprintf(ring->name, "vce%d", i);
 		r = amdgpu_ring_init(adev, ring, 512,
-				     &adev->vce.irq, 0);
+				     &adev->vce.irq, 0,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c
index 217db187207c..6d9108fa22e0 100644
--- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c
@@ -442,7 +442,8 @@ static int vce_v3_0_sw_init(void *handle)
 	for (i = 0; i < adev->vce.num_rings; i++) {
 		ring = &adev->vce.ring[i];
 		sprintf(ring->name, "vce%d", i);
-		r = amdgpu_ring_init(adev, ring, 512, &adev->vce.irq, 0);
+		r = amdgpu_ring_init(adev, ring, 512, &adev->vce.irq, 0,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v4_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v4_0.c
index 3fd102efb7af..a0fb119240f4 100644
--- a/drivers/gpu/drm/amd/amdgpu/vce_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vce_v4_0.c
@@ -476,7 +476,8 @@ static int vce_v4_0_sw_init(void *handle)
 			else
 				ring->doorbell_index = adev->doorbell_index.uvd_vce.vce_ring2_3 * 2 + 1;
 		}
-		r = amdgpu_ring_init(adev, ring, 512, &adev->vce.irq, 0);
+		r = amdgpu_ring_init(adev, ring, 512, &adev->vce.irq, 0,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -539,7 +540,6 @@ static int vce_v4_0_hw_init(void *handle)
 static int vce_v4_0_hw_fini(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	int i;
 
 	if (!amdgpu_sriov_vf(adev)) {
 		/* vce_v4_0_wait_for_idle(handle); */
@@ -549,9 +549,6 @@ static int vce_v4_0_hw_fini(void *handle)
 		DRM_DEBUG("For SRIOV client, shouldn't do anything.\n");
 	}
 
-	for (i = 0; i < adev->vce.num_rings; i++)
-		adev->vce.ring[i].sched.ready = false;
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
index 09b0572b838d..1ad79155ed00 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
@@ -127,7 +127,8 @@ static int vcn_v1_0_sw_init(void *handle)
 
 	ring = &adev->vcn.inst->ring_dec;
 	sprintf(ring->name, "vcn_dec");
-	r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst->irq, 0);
+	r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst->irq, 0,
+			     AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		return r;
 
@@ -145,7 +146,8 @@ static int vcn_v1_0_sw_init(void *handle)
 	for (i = 0; i < adev->vcn.num_enc_rings; ++i) {
 		ring = &adev->vcn.inst->ring_enc[i];
 		sprintf(ring->name, "vcn_enc%d", i);
-		r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst->irq, 0);
+		r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst->irq, 0,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -227,14 +229,11 @@ static int vcn_v1_0_hw_init(void *handle)
 static int vcn_v1_0_hw_fini(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	struct amdgpu_ring *ring = &adev->vcn.inst->ring_dec;
 
 	if ((adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG) ||
 		RREG32_SOC15(VCN, 0, mmUVD_STATUS))
 		vcn_v1_0_set_powergating_state(adev, AMD_PG_STATE_GATE);
 
-	ring->sched.ready = false;
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
index ec8091a661df..349da7bf7c68 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
@@ -92,6 +92,7 @@ static int vcn_v2_0_sw_init(void *handle)
 	struct amdgpu_ring *ring;
 	int i, r;
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+	volatile struct amdgpu_fw_shared *fw_shared;
 
 	/* VCN DEC TRAP */
 	r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_VCN,
@@ -133,7 +134,8 @@ static int vcn_v2_0_sw_init(void *handle)
 	ring->doorbell_index = adev->doorbell_index.vcn.vcn_ring0_1 << 1;
 
 	sprintf(ring->name, "vcn_dec");
-	r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst->irq, 0);
+	r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst->irq, 0,
+			     AMDGPU_RING_PRIO_DEFAULT);
 	if (r)
 		return r;
 
@@ -163,7 +165,8 @@ static int vcn_v2_0_sw_init(void *handle)
 		else
 			ring->doorbell_index = (adev->doorbell_index.vcn.vcn_ring0_1 << 1) + 1 + i;
 		sprintf(ring->name, "vcn_enc%d", i);
-		r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst->irq, 0);
+		r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst->irq, 0,
+				     AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 	}
@@ -174,6 +177,8 @@ static int vcn_v2_0_sw_init(void *handle)
 	if (r)
 		return r;
 
+	fw_shared = adev->vcn.inst->fw_shared_cpu_addr;
+	fw_shared->present_flag_0 = cpu_to_le32(AMDGPU_VCN_MULTI_QUEUE_FLAG);
 	return 0;
 }
 
@@ -188,6 +193,9 @@ static int vcn_v2_0_sw_fini(void *handle)
 {
 	int r;
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+	volatile struct amdgpu_fw_shared *fw_shared = adev->vcn.inst->fw_shared_cpu_addr;
+
+	fw_shared->present_flag_0 = 0;
 
 	amdgpu_virt_free_mm_table(adev);
 
@@ -223,6 +231,10 @@ static int vcn_v2_0_hw_init(void *handle)
 	if (r)
 		goto done;
 
+	//Disable vcn decode for sriov
+	if (amdgpu_sriov_vf(adev))
+		ring->sched.ready = false;
+
 	for (i = 0; i < adev->vcn.num_enc_rings; ++i) {
 		ring = &adev->vcn.inst->ring_enc[i];
 		r = amdgpu_ring_test_helper(ring);
@@ -248,21 +260,12 @@ static int vcn_v2_0_hw_init(void *handle)
 static int vcn_v2_0_hw_fini(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	struct amdgpu_ring *ring = &adev->vcn.inst->ring_dec;
-	int i;
 
 	if ((adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG) ||
 	    (adev->vcn.cur_state != AMD_PG_STATE_GATE &&
 	      RREG32_SOC15(VCN, 0, mmUVD_STATUS)))
 		vcn_v2_0_set_powergating_state(adev, AMD_PG_STATE_GATE);
 
-	ring->sched.ready = false;
-
-	for (i = 0; i < adev->vcn.num_enc_rings; ++i) {
-		ring = &adev->vcn.inst->ring_enc[i];
-		ring->sched.ready = false;
-	}
-
 	return 0;
 }
 
@@ -359,6 +362,15 @@ static void vcn_v2_0_mc_resume(struct amdgpu_device *adev)
 	WREG32_SOC15(UVD, 0, mmUVD_VCPU_CACHE_OFFSET2, 0);
 	WREG32_SOC15(UVD, 0, mmUVD_VCPU_CACHE_SIZE2, AMDGPU_VCN_CONTEXT_SIZE);
 
+	/* non-cache window */
+	WREG32_SOC15(UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_LOW,
+		lower_32_bits(adev->vcn.inst->fw_shared_gpu_addr));
+	WREG32_SOC15(UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_HIGH,
+		upper_32_bits(adev->vcn.inst->fw_shared_gpu_addr));
+	WREG32_SOC15(UVD, 0, mmUVD_VCPU_NONCACHE_OFFSET0, 0);
+	WREG32_SOC15(UVD, 0, mmUVD_VCPU_NONCACHE_SIZE0,
+		AMDGPU_GPU_PAGE_ALIGN(sizeof(struct amdgpu_fw_shared)));
+
 	WREG32_SOC15(UVD, 0, mmUVD_GFX10_ADDR_CONFIG, adev->gfx.config.gb_addr_config);
 }
 
@@ -442,13 +454,16 @@ static void vcn_v2_0_mc_resume_dpg_mode(struct amdgpu_device *adev, bool indirec
 
 	/* non-cache window */
 	WREG32_SOC15_DPG_MODE_2_0(0, SOC15_DPG_MODE_OFFSET_2_0(
-		UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_LOW), 0, 0, indirect);
+		UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_LOW),
+		lower_32_bits(adev->vcn.inst->fw_shared_gpu_addr), 0, indirect);
 	WREG32_SOC15_DPG_MODE_2_0(0, SOC15_DPG_MODE_OFFSET_2_0(
-		UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_HIGH), 0, 0, indirect);
+		UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_HIGH),
+		upper_32_bits(adev->vcn.inst->fw_shared_gpu_addr), 0, indirect);
 	WREG32_SOC15_DPG_MODE_2_0(0, SOC15_DPG_MODE_OFFSET_2_0(
 		UVD, 0, mmUVD_VCPU_NONCACHE_OFFSET0), 0, 0, indirect);
 	WREG32_SOC15_DPG_MODE_2_0(0, SOC15_DPG_MODE_OFFSET_2_0(
-		UVD, 0, mmUVD_VCPU_NONCACHE_SIZE0), 0, 0, indirect);
+		UVD, 0, mmUVD_VCPU_NONCACHE_SIZE0),
+		AMDGPU_GPU_PAGE_ALIGN(sizeof(struct amdgpu_fw_shared)), 0, indirect);
 
 	/* VCN global tiling registers */
 	WREG32_SOC15_DPG_MODE_2_0(0, SOC15_DPG_MODE_OFFSET_2_0(
@@ -773,6 +788,7 @@ static void vcn_v2_0_enable_static_power_gating(struct amdgpu_device *adev)
 
 static int vcn_v2_0_start_dpg_mode(struct amdgpu_device *adev, bool indirect)
 {
+	volatile struct amdgpu_fw_shared *fw_shared = adev->vcn.inst->fw_shared_cpu_addr;
 	struct amdgpu_ring *ring = &adev->vcn.inst->ring_dec;
 	uint32_t rb_bufsz, tmp;
 
@@ -872,6 +888,12 @@ static int vcn_v2_0_start_dpg_mode(struct amdgpu_device *adev, bool indirect)
 	tmp = REG_SET_FIELD(tmp, UVD_RBC_RB_CNTL, RB_RPTR_WR_EN, 1);
 	WREG32_SOC15(UVD, 0, mmUVD_RBC_RB_CNTL, tmp);
 
+	/* Stall DPG before WPTR/RPTR reset */
+	WREG32_P(SOC15_REG_OFFSET(UVD, 0, mmUVD_POWER_STATUS),
+		UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK,
+		~UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK);
+	fw_shared->multi_queue.decode_queue_mode |= FW_QUEUE_RING_RESET;
+
 	/* set the write pointer delay */
 	WREG32_SOC15(UVD, 0, mmUVD_RBC_RB_WPTR_CNTL, 0);
 
@@ -894,11 +916,16 @@ static int vcn_v2_0_start_dpg_mode(struct amdgpu_device *adev, bool indirect)
 	WREG32_SOC15(UVD, 0, mmUVD_RBC_RB_WPTR,
 		lower_32_bits(ring->wptr));
 
+	fw_shared->multi_queue.decode_queue_mode &= ~FW_QUEUE_RING_RESET;
+	/* Unstall DPG */
+	WREG32_P(SOC15_REG_OFFSET(UVD, 0, mmUVD_POWER_STATUS),
+		0, ~UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK);
 	return 0;
 }
 
 static int vcn_v2_0_start(struct amdgpu_device *adev)
 {
+	volatile struct amdgpu_fw_shared *fw_shared = adev->vcn.inst->fw_shared_cpu_addr;
 	struct amdgpu_ring *ring = &adev->vcn.inst->ring_dec;
 	uint32_t rb_bufsz, tmp;
 	uint32_t lmi_swap_cntl;
@@ -1033,6 +1060,7 @@ static int vcn_v2_0_start(struct amdgpu_device *adev)
 	tmp = REG_SET_FIELD(tmp, UVD_RBC_RB_CNTL, RB_RPTR_WR_EN, 1);
 	WREG32_SOC15(UVD, 0, mmUVD_RBC_RB_CNTL, tmp);
 
+	fw_shared->multi_queue.decode_queue_mode |= FW_QUEUE_RING_RESET;
 	/* programm the RB_BASE for ring buffer */
 	WREG32_SOC15(UVD, 0, mmUVD_LMI_RBC_RB_64BIT_BAR_LOW,
 		lower_32_bits(ring->gpu_addr));
@@ -1045,20 +1073,25 @@ static int vcn_v2_0_start(struct amdgpu_device *adev)
 	ring->wptr = RREG32_SOC15(UVD, 0, mmUVD_RBC_RB_RPTR);
 	WREG32_SOC15(UVD, 0, mmUVD_RBC_RB_WPTR,
 			lower_32_bits(ring->wptr));
+	fw_shared->multi_queue.decode_queue_mode &= ~FW_QUEUE_RING_RESET;
 
+	fw_shared->multi_queue.encode_generalpurpose_queue_mode |= FW_QUEUE_RING_RESET;
 	ring = &adev->vcn.inst->ring_enc[0];
 	WREG32_SOC15(UVD, 0, mmUVD_RB_RPTR, lower_32_bits(ring->wptr));
 	WREG32_SOC15(UVD, 0, mmUVD_RB_WPTR, lower_32_bits(ring->wptr));
 	WREG32_SOC15(UVD, 0, mmUVD_RB_BASE_LO, ring->gpu_addr);
 	WREG32_SOC15(UVD, 0, mmUVD_RB_BASE_HI, upper_32_bits(ring->gpu_addr));
 	WREG32_SOC15(UVD, 0, mmUVD_RB_SIZE, ring->ring_size / 4);
+	fw_shared->multi_queue.encode_generalpurpose_queue_mode &= ~FW_QUEUE_RING_RESET;
 
+	fw_shared->multi_queue.encode_lowlatency_queue_mode |= FW_QUEUE_RING_RESET;
 	ring = &adev->vcn.inst->ring_enc[1];
 	WREG32_SOC15(UVD, 0, mmUVD_RB_RPTR2, lower_32_bits(ring->wptr));
 	WREG32_SOC15(UVD, 0, mmUVD_RB_WPTR2, lower_32_bits(ring->wptr));
 	WREG32_SOC15(UVD, 0, mmUVD_RB_BASE_LO2, ring->gpu_addr);
 	WREG32_SOC15(UVD, 0, mmUVD_RB_BASE_HI2, upper_32_bits(ring->gpu_addr));
 	WREG32_SOC15(UVD, 0, mmUVD_RB_SIZE2, ring->ring_size / 4);
+	fw_shared->multi_queue.encode_lowlatency_queue_mode &= ~FW_QUEUE_RING_RESET;
 
 	return 0;
 }
@@ -1180,6 +1213,7 @@ static int vcn_v2_0_pause_dpg_mode(struct amdgpu_device *adev,
 				UVD_POWER_STATUS__UVD_POWER_STATUS_MASK, ret_code);
 
 			if (!ret_code) {
+				volatile struct amdgpu_fw_shared *fw_shared = adev->vcn.inst->fw_shared_cpu_addr;
 				/* pause DPG */
 				reg_data |= UVD_DPG_PAUSE__NJ_PAUSE_DPG_REQ_MASK;
 				WREG32_SOC15(UVD, 0, mmUVD_DPG_PAUSE, reg_data);
@@ -1189,23 +1223,38 @@ static int vcn_v2_0_pause_dpg_mode(struct amdgpu_device *adev,
 					   UVD_DPG_PAUSE__NJ_PAUSE_DPG_ACK_MASK,
 					   UVD_DPG_PAUSE__NJ_PAUSE_DPG_ACK_MASK, ret_code);
 
+				/* Stall DPG before WPTR/RPTR reset */
+				WREG32_P(SOC15_REG_OFFSET(UVD, 0, mmUVD_POWER_STATUS),
+					   UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK,
+					   ~UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK);
 				/* Restore */
+				fw_shared->multi_queue.encode_generalpurpose_queue_mode |= FW_QUEUE_RING_RESET;
 				ring = &adev->vcn.inst->ring_enc[0];
+				ring->wptr = 0;
 				WREG32_SOC15(UVD, 0, mmUVD_RB_BASE_LO, ring->gpu_addr);
 				WREG32_SOC15(UVD, 0, mmUVD_RB_BASE_HI, upper_32_bits(ring->gpu_addr));
 				WREG32_SOC15(UVD, 0, mmUVD_RB_SIZE, ring->ring_size / 4);
 				WREG32_SOC15(UVD, 0, mmUVD_RB_RPTR, lower_32_bits(ring->wptr));
 				WREG32_SOC15(UVD, 0, mmUVD_RB_WPTR, lower_32_bits(ring->wptr));
+				fw_shared->multi_queue.encode_generalpurpose_queue_mode &= ~FW_QUEUE_RING_RESET;
 
+				fw_shared->multi_queue.encode_lowlatency_queue_mode |= FW_QUEUE_RING_RESET;
 				ring = &adev->vcn.inst->ring_enc[1];
+				ring->wptr = 0;
 				WREG32_SOC15(UVD, 0, mmUVD_RB_BASE_LO2, ring->gpu_addr);
 				WREG32_SOC15(UVD, 0, mmUVD_RB_BASE_HI2, upper_32_bits(ring->gpu_addr));
 				WREG32_SOC15(UVD, 0, mmUVD_RB_SIZE2, ring->ring_size / 4);
 				WREG32_SOC15(UVD, 0, mmUVD_RB_RPTR2, lower_32_bits(ring->wptr));
 				WREG32_SOC15(UVD, 0, mmUVD_RB_WPTR2, lower_32_bits(ring->wptr));
+				fw_shared->multi_queue.encode_lowlatency_queue_mode &= ~FW_QUEUE_RING_RESET;
 
+				fw_shared->multi_queue.decode_queue_mode |= FW_QUEUE_RING_RESET;
 				WREG32_SOC15(UVD, 0, mmUVD_RBC_RB_WPTR,
 					   RREG32_SOC15(UVD, 0, mmUVD_SCRATCH2) & 0x7FFFFFFF);
+				fw_shared->multi_queue.decode_queue_mode &= ~FW_QUEUE_RING_RESET;
+				/* Unstall DPG */
+				WREG32_P(SOC15_REG_OFFSET(UVD, 0, mmUVD_POWER_STATUS),
+					   0, ~UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK);
 
 				SOC15_WAIT_ON_RREG(UVD, 0, mmUVD_POWER_STATUS,
 					   UVD_PGFSM_CONFIG__UVDM_UVDU_PWR_ON,
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
index c6363f5ad564..38ca4a712f12 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
@@ -165,6 +165,8 @@ static int vcn_v2_5_sw_init(void *handle)
 		return r;
 
 	for (j = 0; j < adev->vcn.num_vcn_inst; j++) {
+		volatile struct amdgpu_fw_shared *fw_shared;
+
 		if (adev->vcn.harvest_config & (1 << j))
 			continue;
 		adev->vcn.internal.context_id = mmUVD_CONTEXT_ID_INTERNAL_OFFSET;
@@ -191,7 +193,8 @@ static int vcn_v2_5_sw_init(void *handle)
 		ring->doorbell_index = (adev->doorbell_index.vcn.vcn_ring0_1 << 1) +
 				(amdgpu_sriov_vf(adev) ? 2*j : 8*j);
 		sprintf(ring->name, "vcn_dec_%d", j);
-		r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst[j].irq, 0);
+		r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst[j].irq,
+				     0, AMDGPU_RING_PRIO_DEFAULT);
 		if (r)
 			return r;
 
@@ -203,10 +206,15 @@ static int vcn_v2_5_sw_init(void *handle)
 					(amdgpu_sriov_vf(adev) ? (1 + i + 2*j) : (2 + i + 8*j));
 
 			sprintf(ring->name, "vcn_enc_%d.%d", j, i);
-			r = amdgpu_ring_init(adev, ring, 512, &adev->vcn.inst[j].irq, 0);
+			r = amdgpu_ring_init(adev, ring, 512,
+					     &adev->vcn.inst[j].irq, 0,
+					     AMDGPU_RING_PRIO_DEFAULT);
 			if (r)
 				return r;
 		}
+
+		fw_shared = adev->vcn.inst[j].fw_shared_cpu_addr;
+		fw_shared->present_flag_0 = cpu_to_le32(AMDGPU_VCN_MULTI_QUEUE_FLAG);
 	}
 
 	if (amdgpu_sriov_vf(adev)) {
@@ -230,8 +238,16 @@ static int vcn_v2_5_sw_init(void *handle)
  */
 static int vcn_v2_5_sw_fini(void *handle)
 {
-	int r;
+	int i, r;
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+	volatile struct amdgpu_fw_shared *fw_shared;
+
+	for (i = 0; i < adev->vcn.num_vcn_inst; i++) {
+		if (adev->vcn.harvest_config & (1 << i))
+			continue;
+		fw_shared = adev->vcn.inst[i].fw_shared_cpu_addr;
+		fw_shared->present_flag_0 = 0;
+	}
 
 	if (amdgpu_sriov_vf(adev))
 		amdgpu_virt_free_mm_table(adev);
@@ -308,25 +324,16 @@ static int vcn_v2_5_hw_init(void *handle)
 static int vcn_v2_5_hw_fini(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	struct amdgpu_ring *ring;
-	int i, j;
+	int i;
 
 	for (i = 0; i < adev->vcn.num_vcn_inst; ++i) {
 		if (adev->vcn.harvest_config & (1 << i))
 			continue;
-		ring = &adev->vcn.inst[i].ring_dec;
 
 		if ((adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG) ||
 		    (adev->vcn.cur_state != AMD_PG_STATE_GATE &&
 		     RREG32_SOC15(VCN, i, mmUVD_STATUS)))
 			vcn_v2_5_set_powergating_state(adev, AMD_PG_STATE_GATE);
-
-		ring->sched.ready = false;
-
-		for (j = 0; j < adev->vcn.num_enc_rings; ++j) {
-			ring = &adev->vcn.inst[i].ring_enc[j];
-			ring->sched.ready = false;
-		}
 	}
 
 	return 0;
@@ -424,6 +431,15 @@ static void vcn_v2_5_mc_resume(struct amdgpu_device *adev)
 			upper_32_bits(adev->vcn.inst[i].gpu_addr + offset + AMDGPU_VCN_STACK_SIZE));
 		WREG32_SOC15(UVD, i, mmUVD_VCPU_CACHE_OFFSET2, 0);
 		WREG32_SOC15(UVD, i, mmUVD_VCPU_CACHE_SIZE2, AMDGPU_VCN_CONTEXT_SIZE);
+
+		/* non-cache window */
+		WREG32_SOC15(UVD, i, mmUVD_LMI_VCPU_NC0_64BIT_BAR_LOW,
+			lower_32_bits(adev->vcn.inst[i].fw_shared_gpu_addr));
+		WREG32_SOC15(UVD, i, mmUVD_LMI_VCPU_NC0_64BIT_BAR_HIGH,
+			upper_32_bits(adev->vcn.inst[i].fw_shared_gpu_addr));
+		WREG32_SOC15(UVD, i, mmUVD_VCPU_NONCACHE_OFFSET0, 0);
+		WREG32_SOC15(UVD, i, mmUVD_VCPU_NONCACHE_SIZE0,
+			AMDGPU_GPU_PAGE_ALIGN(sizeof(struct amdgpu_fw_shared)));
 	}
 }
 
@@ -507,13 +523,16 @@ static void vcn_v2_5_mc_resume_dpg_mode(struct amdgpu_device *adev, int inst_idx
 
 	/* non-cache window */
 	WREG32_SOC15_DPG_MODE_2_0(inst_idx, SOC15_DPG_MODE_OFFSET_2_0(
-		UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_LOW), 0, 0, indirect);
+		UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_LOW),
+		lower_32_bits(adev->vcn.inst[inst_idx].fw_shared_gpu_addr), 0, indirect);
 	WREG32_SOC15_DPG_MODE_2_0(inst_idx, SOC15_DPG_MODE_OFFSET_2_0(
-		UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_HIGH), 0, 0, indirect);
+		UVD, 0, mmUVD_LMI_VCPU_NC0_64BIT_BAR_HIGH),
+		upper_32_bits(adev->vcn.inst[inst_idx].fw_shared_gpu_addr), 0, indirect);
 	WREG32_SOC15_DPG_MODE_2_0(inst_idx, SOC15_DPG_MODE_OFFSET_2_0(
 		UVD, 0, mmUVD_VCPU_NONCACHE_OFFSET0), 0, 0, indirect);
 	WREG32_SOC15_DPG_MODE_2_0(inst_idx, SOC15_DPG_MODE_OFFSET_2_0(
-		UVD, 0, mmUVD_VCPU_NONCACHE_SIZE0), 0, 0, indirect);
+		UVD, 0, mmUVD_VCPU_NONCACHE_SIZE0),
+		AMDGPU_GPU_PAGE_ALIGN(sizeof(struct amdgpu_fw_shared)), 0, indirect);
 
 	/* VCN global tiling registers */
 	WREG32_SOC15_DPG_MODE_2_0(inst_idx, SOC15_DPG_MODE_OFFSET_2_0(
@@ -750,6 +769,7 @@ static void vcn_v2_5_enable_clock_gating(struct amdgpu_device *adev)
 
 static int vcn_v2_5_start_dpg_mode(struct amdgpu_device *adev, int inst_idx, bool indirect)
 {
+	volatile struct amdgpu_fw_shared *fw_shared = adev->vcn.inst[inst_idx].fw_shared_cpu_addr;
 	struct amdgpu_ring *ring;
 	uint32_t rb_bufsz, tmp;
 
@@ -855,6 +875,12 @@ static int vcn_v2_5_start_dpg_mode(struct amdgpu_device *adev, int inst_idx, boo
 	tmp = REG_SET_FIELD(tmp, UVD_RBC_RB_CNTL, RB_RPTR_WR_EN, 1);
 	WREG32_SOC15(UVD, inst_idx, mmUVD_RBC_RB_CNTL, tmp);
 
+	/* Stall DPG before WPTR/RPTR reset */
+	WREG32_P(SOC15_REG_OFFSET(UVD, inst_idx, mmUVD_POWER_STATUS),
+		UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK,
+		~UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK);
+	fw_shared->multi_queue.decode_queue_mode |= FW_QUEUE_RING_RESET;
+
 	/* set the write pointer delay */
 	WREG32_SOC15(UVD, inst_idx, mmUVD_RBC_RB_WPTR_CNTL, 0);
 
@@ -877,6 +903,11 @@ static int vcn_v2_5_start_dpg_mode(struct amdgpu_device *adev, int inst_idx, boo
 	WREG32_SOC15(UVD, inst_idx, mmUVD_RBC_RB_WPTR,
 		lower_32_bits(ring->wptr));
 
+	fw_shared->multi_queue.decode_queue_mode &= ~FW_QUEUE_RING_RESET;
+	/* Unstall DPG */
+	WREG32_P(SOC15_REG_OFFSET(UVD, inst_idx, mmUVD_POWER_STATUS),
+		0, ~UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK);
+
 	return 0;
 }
 
@@ -962,6 +993,7 @@ static int vcn_v2_5_start(struct amdgpu_device *adev)
 	vcn_v2_5_mc_resume(adev);
 
 	for (i = 0; i < adev->vcn.num_vcn_inst; ++i) {
+		volatile struct amdgpu_fw_shared *fw_shared = adev->vcn.inst[i].fw_shared_cpu_addr;
 		if (adev->vcn.harvest_config & (1 << i))
 			continue;
 		/* VCN global tiling registers */
@@ -1035,6 +1067,7 @@ static int vcn_v2_5_start(struct amdgpu_device *adev)
 		tmp = REG_SET_FIELD(tmp, UVD_RBC_RB_CNTL, RB_RPTR_WR_EN, 1);
 		WREG32_SOC15(UVD, i, mmUVD_RBC_RB_CNTL, tmp);
 
+		fw_shared->multi_queue.decode_queue_mode |= FW_QUEUE_RING_RESET;
 		/* programm the RB_BASE for ring buffer */
 		WREG32_SOC15(UVD, i, mmUVD_LMI_RBC_RB_64BIT_BAR_LOW,
 			lower_32_bits(ring->gpu_addr));
@@ -1047,19 +1080,25 @@ static int vcn_v2_5_start(struct amdgpu_device *adev)
 		ring->wptr = RREG32_SOC15(UVD, i, mmUVD_RBC_RB_RPTR);
 		WREG32_SOC15(UVD, i, mmUVD_RBC_RB_WPTR,
 				lower_32_bits(ring->wptr));
+		fw_shared->multi_queue.decode_queue_mode &= ~FW_QUEUE_RING_RESET;
+
+		fw_shared->multi_queue.encode_generalpurpose_queue_mode |= FW_QUEUE_RING_RESET;
 		ring = &adev->vcn.inst[i].ring_enc[0];
 		WREG32_SOC15(UVD, i, mmUVD_RB_RPTR, lower_32_bits(ring->wptr));
 		WREG32_SOC15(UVD, i, mmUVD_RB_WPTR, lower_32_bits(ring->wptr));
 		WREG32_SOC15(UVD, i, mmUVD_RB_BASE_LO, ring->gpu_addr);
 		WREG32_SOC15(UVD, i, mmUVD_RB_BASE_HI, upper_32_bits(ring->gpu_addr));
 		WREG32_SOC15(UVD, i, mmUVD_RB_SIZE, ring->ring_size / 4);
+		fw_shared->multi_queue.encode_generalpurpose_queue_mode &= ~FW_QUEUE_RING_RESET;
 
+		fw_shared->multi_queue.encode_lowlatency_queue_mode |= FW_QUEUE_RING_RESET;
 		ring = &adev->vcn.inst[i].ring_enc[1];
 		WREG32_SOC15(UVD, i, mmUVD_RB_RPTR2, lower_32_bits(ring->wptr));
 		WREG32_SOC15(UVD, i, mmUVD_RB_WPTR2, lower_32_bits(ring->wptr));
 		WREG32_SOC15(UVD, i, mmUVD_RB_BASE_LO2, ring->gpu_addr);
 		WREG32_SOC15(UVD, i, mmUVD_RB_BASE_HI2, upper_32_bits(ring->gpu_addr));
 		WREG32_SOC15(UVD, i, mmUVD_RB_SIZE2, ring->ring_size / 4);
+		fw_shared->multi_queue.encode_lowlatency_queue_mode &= ~FW_QUEUE_RING_RESET;
 	}
 
 	return 0;
@@ -1365,7 +1404,7 @@ static int vcn_v2_5_pause_dpg_mode(struct amdgpu_device *adev,
 {
 	struct amdgpu_ring *ring;
 	uint32_t reg_data = 0;
-	int ret_code;
+	int ret_code = 0;
 
 	/* pause/unpause if state is changed */
 	if (adev->vcn.inst[inst_idx].pause_state.fw_based != new_state->fw_based) {
@@ -1375,11 +1414,12 @@ static int vcn_v2_5_pause_dpg_mode(struct amdgpu_device *adev,
 			(~UVD_DPG_PAUSE__NJ_PAUSE_DPG_ACK_MASK);
 
 		if (new_state->fw_based == VCN_DPG_STATE__PAUSE) {
-			ret_code = 0;
 			SOC15_WAIT_ON_RREG(UVD, inst_idx, mmUVD_POWER_STATUS, 0x1,
 				UVD_POWER_STATUS__UVD_POWER_STATUS_MASK, ret_code);
 
 			if (!ret_code) {
+				volatile struct amdgpu_fw_shared *fw_shared = adev->vcn.inst[inst_idx].fw_shared_cpu_addr;
+
 				/* pause DPG */
 				reg_data |= UVD_DPG_PAUSE__NJ_PAUSE_DPG_REQ_MASK;
 				WREG32_SOC15(UVD, inst_idx, mmUVD_DPG_PAUSE, reg_data);
@@ -1389,31 +1429,49 @@ static int vcn_v2_5_pause_dpg_mode(struct amdgpu_device *adev,
 					   UVD_DPG_PAUSE__NJ_PAUSE_DPG_ACK_MASK,
 					   UVD_DPG_PAUSE__NJ_PAUSE_DPG_ACK_MASK, ret_code);
 
+				/* Stall DPG before WPTR/RPTR reset */
+				WREG32_P(SOC15_REG_OFFSET(UVD, inst_idx, mmUVD_POWER_STATUS),
+					   UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK,
+					   ~UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK);
+
 				/* Restore */
+				fw_shared->multi_queue.encode_generalpurpose_queue_mode |= FW_QUEUE_RING_RESET;
 				ring = &adev->vcn.inst[inst_idx].ring_enc[0];
+				ring->wptr = 0;
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_BASE_LO, ring->gpu_addr);
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_BASE_HI, upper_32_bits(ring->gpu_addr));
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_SIZE, ring->ring_size / 4);
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_RPTR, lower_32_bits(ring->wptr));
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_WPTR, lower_32_bits(ring->wptr));
+				fw_shared->multi_queue.encode_generalpurpose_queue_mode &= ~FW_QUEUE_RING_RESET;
 
+				fw_shared->multi_queue.encode_lowlatency_queue_mode |= FW_QUEUE_RING_RESET;
 				ring = &adev->vcn.inst[inst_idx].ring_enc[1];
+				ring->wptr = 0;
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_BASE_LO2, ring->gpu_addr);
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_BASE_HI2, upper_32_bits(ring->gpu_addr));
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_SIZE2, ring->ring_size / 4);
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_RPTR2, lower_32_bits(ring->wptr));
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RB_WPTR2, lower_32_bits(ring->wptr));
+				fw_shared->multi_queue.encode_lowlatency_queue_mode &= ~FW_QUEUE_RING_RESET;
 
+				fw_shared->multi_queue.decode_queue_mode |= FW_QUEUE_RING_RESET;
 				WREG32_SOC15(UVD, inst_idx, mmUVD_RBC_RB_WPTR,
 					   RREG32_SOC15(UVD, inst_idx, mmUVD_SCRATCH2) & 0x7FFFFFFF);
+				fw_shared->multi_queue.decode_queue_mode &= ~FW_QUEUE_RING_RESET;
+
+				/* Unstall DPG */
+				WREG32_P(SOC15_REG_OFFSET(UVD, inst_idx, mmUVD_POWER_STATUS),
+					   0, ~UVD_POWER_STATUS__STALL_DPG_POWER_UP_MASK);
 
 				SOC15_WAIT_ON_RREG(UVD, inst_idx, mmUVD_POWER_STATUS,
 					   UVD_PGFSM_CONFIG__UVDM_UVDU_PWR_ON, UVD_POWER_STATUS__UVD_POWER_STATUS_MASK, ret_code);
 			}
 		} else {
-			/* unpause dpg, no need to wait */
 			reg_data &= ~UVD_DPG_PAUSE__NJ_PAUSE_DPG_REQ_MASK;
 			WREG32_SOC15(UVD, inst_idx, mmUVD_DPG_PAUSE, reg_data);
+			SOC15_WAIT_ON_RREG(UVD, inst_idx, mmUVD_POWER_STATUS, 0x1,
+				UVD_POWER_STATUS__UVD_POWER_STATUS_MASK, ret_code);
 		}
 		adev->vcn.inst[inst_idx].pause_state.fw_based = new_state->fw_based;
 	}
diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c
index 3ce10e05d0d6..af8986a55354 100644
--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -448,27 +448,6 @@ static bool vi_read_bios_from_rom(struct amdgpu_device *adev,
 	return true;
 }
 
-static void vi_detect_hw_virtualization(struct amdgpu_device *adev)
-{
-	uint32_t reg = 0;
-
-	if (adev->asic_type == CHIP_TONGA ||
-	    adev->asic_type == CHIP_FIJI) {
-	       reg = RREG32(mmBIF_IOV_FUNC_IDENTIFIER);
-	       /* bit0: 0 means pf and 1 means vf */
-	       if (REG_GET_FIELD(reg, BIF_IOV_FUNC_IDENTIFIER, FUNC_IDENTIFIER))
-		       adev->virt.caps |= AMDGPU_SRIOV_CAPS_IS_VF;
-	       /* bit31: 0 means disable IOV and 1 means enable */
-	       if (REG_GET_FIELD(reg, BIF_IOV_FUNC_IDENTIFIER, IOV_ENABLE))
-		       adev->virt.caps |= AMDGPU_SRIOV_CAPS_ENABLE_IOV;
-	}
-
-	if (reg == 0) {
-		if (is_virtual_machine()) /* passthrough mode exclus sr-iov mode */
-			adev->virt.caps |= AMDGPU_PASSTHROUGH_MODE;
-	}
-}
-
 static const struct amdgpu_allowed_register_entry vi_allowed_read_registers[] = {
 	{mmGRBM_STATUS},
 	{mmGRBM_STATUS2},
@@ -1728,9 +1707,6 @@ static const struct amdgpu_ip_block_version vi_common_ip_block =
 
 int vi_set_ip_blocks(struct amdgpu_device *adev)
 {
-	/* in early init stage, vbios code won't work */
-	vi_detect_hw_virtualization(adev);
-
 	if (amdgpu_sriov_vf(adev))
 		adev->virt.ops = &xgpu_vi_virt_ops;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/vid.h b/drivers/gpu/drm/amd/amdgpu/vid.h
index 19ddd2312e00..7a01e6133798 100644
--- a/drivers/gpu/drm/amd/amdgpu/vid.h
+++ b/drivers/gpu/drm/amd/amdgpu/vid.h
@@ -332,7 +332,7 @@
 #              define PACKET3_DMA_DATA_CMD_SAIC    (1 << 28)
 #              define PACKET3_DMA_DATA_CMD_DAIC    (1 << 29)
 #              define PACKET3_DMA_DATA_CMD_RAW_WAIT  (1 << 30)
-#define	PACKET3_AQUIRE_MEM				0x58
+#define	PACKET3_ACQUIRE_MEM				0x58
 #define	PACKET3_REWIND					0x59
 #define	PACKET3_LOAD_UCONFIG_REG			0x5E
 #define	PACKET3_LOAD_SH_REG				0x5F
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
index 0ec5f25adf56..ff47b1f69b68 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
@@ -215,6 +215,7 @@ static int set_queue_properties_from_user(struct queue_properties *q_properties,
 	}
 
 	q_properties->is_interop = false;
+	q_properties->is_gws = false;
 	q_properties->queue_percent = args->queue_percentage;
 	q_properties->priority = args->queue_priority;
 	q_properties->queue_address = args->ring_base_address;
@@ -1584,6 +1585,45 @@ static int kfd_ioctl_unmap_memory_from_gpu(struct file *filep,
 	return err;
 }
 
+static int kfd_ioctl_alloc_queue_gws(struct file *filep,
+		struct kfd_process *p, void *data)
+{
+	int retval;
+	struct kfd_ioctl_alloc_queue_gws_args *args = data;
+	struct queue *q;
+	struct kfd_dev *dev;
+
+	mutex_lock(&p->mutex);
+	q = pqm_get_user_queue(&p->pqm, args->queue_id);
+
+	if (q) {
+		dev = q->device;
+	} else {
+		retval = -EINVAL;
+		goto out_unlock;
+	}
+
+	if (!dev->gws) {
+		retval = -ENODEV;
+		goto out_unlock;
+	}
+
+	if (dev->dqm->sched_policy == KFD_SCHED_POLICY_NO_HWS) {
+		retval = -ENODEV;
+		goto out_unlock;
+	}
+
+	retval = pqm_set_gws(&p->pqm, args->queue_id, args->num_gws ? dev->gws : NULL);
+	mutex_unlock(&p->mutex);
+
+	args->first_gws = 0;
+	return retval;
+
+out_unlock:
+	mutex_unlock(&p->mutex);
+	return retval;
+}
+
 static int kfd_ioctl_get_dmabuf_info(struct file *filep,
 		struct kfd_process *p, void *data)
 {
@@ -1786,6 +1826,8 @@ static const struct amdkfd_ioctl_desc amdkfd_ioctls[] = {
 	AMDKFD_IOCTL_DEF(AMDKFD_IOC_IMPORT_DMABUF,
 				kfd_ioctl_import_dmabuf, 0),
 
+	AMDKFD_IOCTL_DEF(AMDKFD_IOC_ALLOC_QUEUE_GWS,
+			kfd_ioctl_alloc_queue_gws, 0),
 };
 
 #define AMDKFD_CORE_IOCTL_COUNT	ARRAY_SIZE(amdkfd_ioctls)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
index de9f68d5c312..1009a3b8dcc2 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
@@ -502,7 +502,7 @@ int kfd_parse_crat_table(void *crat_image, struct list_head *device_list,
 	num_nodes = crat_table->num_domains;
 	image_len = crat_table->length;
 
-	pr_info("Parsing CRAT table with %d nodes\n", num_nodes);
+	pr_debug("Parsing CRAT table with %d nodes\n", num_nodes);
 
 	for (node_id = 0; node_id < num_nodes; node_id++) {
 		top_dev = kfd_create_topology_device(device_list);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
index 05bc6d96ec52..0491ab2b4a9b 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -569,6 +569,23 @@ static void kfd_cwsr_init(struct kfd_dev *kfd)
 	}
 }
 
+static int kfd_gws_init(struct kfd_dev *kfd)
+{
+	int ret = 0;
+
+	if (kfd->dqm->sched_policy == KFD_SCHED_POLICY_NO_HWS)
+		return 0;
+
+	if (hws_gws_support
+		|| (kfd->device_info->asic_family >= CHIP_VEGA10
+			&& kfd->device_info->asic_family <= CHIP_RAVEN
+			&& kfd->mec2_fw_version >= 0x1b3))
+		ret = amdgpu_amdkfd_alloc_gws(kfd->kgd,
+				amdgpu_amdkfd_get_num_gws(kfd->kgd), &kfd->gws);
+
+	return ret;
+}
+
 bool kgd2kfd_device_init(struct kfd_dev *kfd,
 			 struct drm_device *ddev,
 			 const struct kgd2kfd_shared_resources *gpu_resources)
@@ -578,6 +595,8 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd,
 	kfd->ddev = ddev;
 	kfd->mec_fw_version = amdgpu_amdkfd_get_fw_version(kfd->kgd,
 			KGD_ENGINE_MEC1);
+	kfd->mec2_fw_version = amdgpu_amdkfd_get_fw_version(kfd->kgd,
+			KGD_ENGINE_MEC2);
 	kfd->sdma_fw_version = amdgpu_amdkfd_get_fw_version(kfd->kgd,
 			KGD_ENGINE_SDMA1);
 	kfd->shared_resources = *gpu_resources;
@@ -598,13 +617,6 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd,
 	} else
 		kfd->max_proc_per_quantum = hws_max_conc_proc;
 
-	/* Allocate global GWS that is shared by all KFD processes */
-	if (hws_gws_support && amdgpu_amdkfd_alloc_gws(kfd->kgd,
-			amdgpu_amdkfd_get_num_gws(kfd->kgd), &kfd->gws)) {
-		dev_err(kfd_device, "Could not allocate %d gws\n",
-			amdgpu_amdkfd_get_num_gws(kfd->kgd));
-		goto out;
-	}
 	/* calculate max size of mqds needed for queues */
 	size = max_num_of_queues_per_device *
 			kfd->device_info->mqd_size_aligned;
@@ -662,6 +674,15 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd,
 		goto device_queue_manager_error;
 	}
 
+	/* If supported on this device, allocate global GWS that is shared
+	 * by all KFD processes
+	 */
+	if (kfd_gws_init(kfd)) {
+		dev_err(kfd_device, "Could not allocate %d gws\n",
+			amdgpu_amdkfd_get_num_gws(kfd->kgd));
+		goto gws_error;
+	}
+
 	if (kfd_iommu_device_init(kfd)) {
 		dev_err(kfd_device, "Error initializing iommuv2\n");
 		goto device_iommu_error;
@@ -691,6 +712,7 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd,
 kfd_topology_add_device_error:
 kfd_resume_error:
 device_iommu_error:
+gws_error:
 	device_queue_manager_uninit(kfd->dqm);
 device_queue_manager_error:
 	kfd_interrupt_exit(kfd);
@@ -701,7 +723,7 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd,
 kfd_gtt_sa_init_error:
 	amdgpu_amdkfd_free_gtt_mem(kfd->kgd, kfd->gtt_mem);
 alloc_gtt_mem_failure:
-	if (hws_gws_support)
+	if (kfd->gws)
 		amdgpu_amdkfd_free_gws(kfd->kgd, kfd->gws);
 	dev_err(kfd_device,
 		"device %x:%x NOT added due to errors\n",
@@ -720,7 +742,7 @@ void kgd2kfd_device_exit(struct kfd_dev *kfd)
 		kfd_doorbell_fini(kfd);
 		kfd_gtt_sa_fini(kfd);
 		amdgpu_amdkfd_free_gtt_mem(kfd->kgd, kfd->gtt_mem);
-		if (hws_gws_support)
+		if (kfd->gws)
 			amdgpu_amdkfd_free_gws(kfd->kgd, kfd->gws);
 	}
 
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index 77ea0f0cb163..ae9547791813 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -505,8 +505,13 @@ static int destroy_queue_nocpsch_locked(struct device_queue_manager *dqm,
 		deallocate_vmid(dqm, qpd, q);
 	}
 	qpd->queue_count--;
-	if (q->properties.is_active)
+	if (q->properties.is_active) {
 		decrement_queue_count(dqm, q->properties.type);
+		if (q->properties.is_gws) {
+			dqm->gws_queue_count--;
+			qpd->mapped_gws_queue = false;
+		}
+	}
 
 	return retval;
 }
@@ -583,6 +588,20 @@ static int update_queue(struct device_queue_manager *dqm, struct queue *q)
 	else if (!q->properties.is_active && prev_active)
 		decrement_queue_count(dqm, q->properties.type);
 
+	if (q->gws && !q->properties.is_gws) {
+		if (q->properties.is_active) {
+			dqm->gws_queue_count++;
+			pdd->qpd.mapped_gws_queue = true;
+		}
+		q->properties.is_gws = true;
+	} else if (!q->gws && q->properties.is_gws) {
+		if (q->properties.is_active) {
+			dqm->gws_queue_count--;
+			pdd->qpd.mapped_gws_queue = false;
+		}
+		q->properties.is_gws = false;
+	}
+
 	if (dqm->sched_policy != KFD_SCHED_POLICY_NO_HWS)
 		retval = map_queues_cpsch(dqm);
 	else if (q->properties.is_active &&
@@ -631,6 +650,10 @@ static int evict_process_queues_nocpsch(struct device_queue_manager *dqm,
 				q->properties.type)];
 		q->properties.is_active = false;
 		decrement_queue_count(dqm, q->properties.type);
+		if (q->properties.is_gws) {
+			dqm->gws_queue_count--;
+			qpd->mapped_gws_queue = false;
+		}
 
 		if (WARN_ONCE(!dqm->sched_running, "Evict when stopped\n"))
 			continue;
@@ -744,6 +767,10 @@ static int restore_process_queues_nocpsch(struct device_queue_manager *dqm,
 				q->properties.type)];
 		q->properties.is_active = true;
 		increment_queue_count(dqm, q->properties.type);
+		if (q->properties.is_gws) {
+			dqm->gws_queue_count++;
+			qpd->mapped_gws_queue = true;
+		}
 
 		if (WARN_ONCE(!dqm->sched_running, "Restore when stopped\n"))
 			continue;
@@ -913,6 +940,7 @@ static int initialize_nocpsch(struct device_queue_manager *dqm)
 	INIT_LIST_HEAD(&dqm->queues);
 	dqm->active_queue_count = dqm->next_pipe_to_allocate = 0;
 	dqm->active_cp_queue_count = 0;
+	dqm->gws_queue_count = 0;
 
 	for (pipe = 0; pipe < get_pipes_per_mec(dqm); pipe++) {
 		int pipe_offset = pipe * get_queues_per_pipe(dqm);
@@ -1082,7 +1110,7 @@ static int initialize_cpsch(struct device_queue_manager *dqm)
 	INIT_LIST_HEAD(&dqm->queues);
 	dqm->active_queue_count = dqm->processes_count = 0;
 	dqm->active_cp_queue_count = 0;
-
+	dqm->gws_queue_count = 0;
 	dqm->active_runlist = false;
 	dqm->sdma_bitmap = ~0ULL >> (64 - get_num_sdma_queues(dqm));
 	dqm->xgmi_sdma_bitmap = ~0ULL >> (64 - get_num_xgmi_sdma_queues(dqm));
@@ -1432,6 +1460,10 @@ static int destroy_queue_cpsch(struct device_queue_manager *dqm,
 				KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0);
 		if (retval == -ETIME)
 			qpd->reset_wavefronts = true;
+		if (q->properties.is_gws) {
+			dqm->gws_queue_count--;
+			qpd->mapped_gws_queue = false;
+		}
 	}
 
 	/*
@@ -1650,8 +1682,13 @@ static int process_termination_cpsch(struct device_queue_manager *dqm,
 		else if (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)
 			deallocate_sdma_queue(dqm, q);
 
-		if (q->properties.is_active)
+		if (q->properties.is_active) {
 			decrement_queue_count(dqm, q->properties.type);
+			if (q->properties.is_gws) {
+				dqm->gws_queue_count--;
+				qpd->mapped_gws_queue = false;
+			}
+		}
 
 		dqm->total_queue_count--;
 	}
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
index 50d919f814e9..4afa015c69b1 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
@@ -182,6 +182,7 @@ struct device_queue_manager {
 	unsigned int		processes_count;
 	unsigned int		active_queue_count;
 	unsigned int		active_cp_queue_count;
+	unsigned int		gws_queue_count;
 	unsigned int		total_queue_count;
 	unsigned int		next_pipe_to_allocate;
 	unsigned int		*allocated_queues;
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c b/drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c
index bae706462f96..a2b77d1df854 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c
@@ -126,6 +126,7 @@ static bool kq_initialize(struct kernel_queue *kq, struct kfd_dev *dev,
 
 	prop.queue_size = queue_size;
 	prop.is_interop = false;
+	prop.is_gws = false;
 	prop.priority = 1;
 	prop.queue_percent = 100;
 	prop.type = type;
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c
index efdb75e7677b..685ca82d42fe 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c
@@ -41,7 +41,7 @@ static void pm_calc_rlib_size(struct packet_manager *pm,
 				unsigned int *rlib_size,
 				bool *over_subscription)
 {
-	unsigned int process_count, queue_count, compute_queue_count;
+	unsigned int process_count, queue_count, compute_queue_count, gws_queue_count;
 	unsigned int map_queue_size;
 	unsigned int max_proc_per_quantum = 1;
 	struct kfd_dev *dev = pm->dqm->dev;
@@ -49,6 +49,7 @@ static void pm_calc_rlib_size(struct packet_manager *pm,
 	process_count = pm->dqm->processes_count;
 	queue_count = pm->dqm->active_queue_count;
 	compute_queue_count = pm->dqm->active_cp_queue_count;
+	gws_queue_count = pm->dqm->gws_queue_count;
 
 	/* check if there is over subscription
 	 * Note: the arbitration between the number of VMIDs and
@@ -61,7 +62,8 @@ static void pm_calc_rlib_size(struct packet_manager *pm,
 		max_proc_per_quantum = dev->max_proc_per_quantum;
 
 	if ((process_count > max_proc_per_quantum) ||
-	    compute_queue_count > get_cp_queues_num(pm->dqm)) {
+	    compute_queue_count > get_cp_queues_num(pm->dqm) ||
+	    gws_queue_count > 1) {
 		*over_subscription = true;
 		pr_debug("Over subscribed runlist\n");
 	}
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c
index 2de01009f1b6..bdca9dc5f118 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c
@@ -43,7 +43,7 @@ static int pm_map_process_v9(struct packet_manager *pm,
 	packet->bitfields2.pasid = qpd->pqm->process->pasid;
 	packet->bitfields14.gds_size = qpd->gds_size & 0x3F;
 	packet->bitfields14.gds_size_hi = (qpd->gds_size >> 6) & 0xF;
-	packet->bitfields14.num_gws = qpd->num_gws;
+	packet->bitfields14.num_gws = (qpd->mapped_gws_queue) ? qpd->num_gws : 0;
 	packet->bitfields14.num_oac = qpd->num_oac;
 	packet->bitfields14.sdma_enable = 1;
 	packet->bitfields14.num_queues = (qpd->is_debug) ? 0 : qpd->queue_count;
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
index 4a3049841086..03fc62e8d4ac 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
@@ -282,6 +282,7 @@ struct kfd_dev {
 
 	/* Firmware versions */
 	uint16_t mec_fw_version;
+	uint16_t mec2_fw_version;
 	uint16_t sdma_fw_version;
 
 	/* Maximum process number mapped to HW scheduler */
@@ -410,6 +411,10 @@ enum KFD_QUEUE_PRIORITY {
  * @is_active: Defines if the queue is active or not. @is_active and
  * @is_evicted are protected by the DQM lock.
  *
+ * @is_gws: Defines if the queue has been updated to be GWS-capable or not.
+ * @is_gws should be protected by the DQM lock, since changing it can yield the
+ * possibility of updating DQM state on number of GWS queues.
+ *
  * @vmid: If the scheduling mode is no cp scheduling the field defines the vmid
  * of the queue.
  *
@@ -432,6 +437,7 @@ struct queue_properties {
 	bool is_interop;
 	bool is_evicted;
 	bool is_active;
+	bool is_gws;
 	/* Not relevant for user mode queues in cp scheduling */
 	unsigned int vmid;
 	/* Relevant only for sdma queues*/
@@ -563,6 +569,14 @@ struct qcm_process_device {
 	 */
 	bool reset_wavefronts;
 
+	/* This flag tells us if this process has a GWS-capable
+	 * queue that will be mapped into the runlist. It's
+	 * possible to request a GWS BO, but not have the queue
+	 * currently mapped, and this changes how the MAP_PROCESS
+	 * PM4 packet is configured.
+	 */
+	bool mapped_gws_queue;
+
 	/*
 	 * All the memory management data should be here too
 	 */
@@ -923,6 +937,8 @@ int pqm_set_gws(struct process_queue_manager *pqm, unsigned int qid,
 			void *gws);
 struct kernel_queue *pqm_get_kernel_queue(struct process_queue_manager *pqm,
 						unsigned int qid);
+struct queue *pqm_get_user_queue(struct process_queue_manager *pqm,
+						unsigned int qid);
 int pqm_get_wave_state(struct process_queue_manager *pqm,
 		       unsigned int qid,
 		       void __user *ctl_stack,
@@ -1050,7 +1066,7 @@ void kfd_dec_compute_active(struct kfd_dev *dev);
 /* Check with device cgroup if @kfd device is accessible */
 static inline int kfd_devcgroup_check_permission(struct kfd_dev *kfd)
 {
-#if defined(CONFIG_CGROUP_DEVICE)
+#if defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF)
 	struct drm_device *ddev = kfd->ddev;
 
 	return devcgroup_check_permission(DEVCG_DEV_CHAR, ddev->driver->major,
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c
index fe0cd49d4ea7..82b4c5a9382a 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c
@@ -858,6 +858,7 @@ struct kfd_process_device *kfd_create_process_device_data(struct kfd_dev *dev,
 	pdd->qpd.dqm = dev->dqm;
 	pdd->qpd.pqm = &p->pqm;
 	pdd->qpd.evicted = 0;
+	pdd->qpd.mapped_gws_queue = false;
 	pdd->process = p;
 	pdd->bound = PDD_UNBOUND;
 	pdd->already_dequeued = false;
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
index 084c35f55d59..eb1635ac8988 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
@@ -476,6 +476,15 @@ struct kernel_queue *pqm_get_kernel_queue(
 	return NULL;
 }
 
+struct queue *pqm_get_user_queue(struct process_queue_manager *pqm,
+					unsigned int qid)
+{
+	struct process_queue_node *pqn;
+
+	pqn = get_queue_by_qid(pqm, qid);
+	return pqn ? pqn->q : NULL;
+}
+
 int pqm_get_wave_state(struct process_queue_manager *pqm,
 		       unsigned int qid,
 		       void __user *ctl_stack,
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
index aa0bfa78a667..bc4a22df12d7 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
@@ -787,7 +787,6 @@ static int kfd_topology_update_sysfs(void)
 {
 	int ret;
 
-	pr_info("Creating topology SYSFS entries\n");
 	if (!sys_props.kobj_topology) {
 		sys_props.kobj_topology =
 				kfd_alloc_struct(sys_props.kobj_topology);
@@ -1048,7 +1047,6 @@ int kfd_topology_init(void)
 		sys_props.generation_count++;
 		kfd_update_system_properties();
 		kfd_debug_print_topology();
-		pr_info("Finished initializing topology\n");
 	} else
 		pr_err("Failed to update topology in sysfs ret=%d\n", ret);
 
@@ -1303,6 +1301,10 @@ int kfd_topology_add_device(struct kfd_dev *gpu)
 
 	dev->node_props.vendor_id = gpu->pdev->vendor;
 	dev->node_props.device_id = gpu->pdev->device;
+	dev->node_props.capability |=
+		((amdgpu_amdkfd_get_asic_rev_id(dev->gpu->kgd) <<
+			HSA_CAP_ASIC_REVISION_SHIFT) &
+			HSA_CAP_ASIC_REVISION_MASK);
 	dev->node_props.location_id = pci_dev_id(gpu->pdev);
 	dev->node_props.max_engine_clk_fcompute =
 		amdgpu_amdkfd_get_max_engine_clock_in_mhz(dev->gpu->kgd);
@@ -1317,7 +1319,7 @@ int kfd_topology_add_device(struct kfd_dev *gpu)
 				gpu->device_info->num_xgmi_sdma_engines;
 	dev->node_props.num_sdma_queues_per_engine =
 				gpu->device_info->num_sdma_queues_per_engine;
-	dev->node_props.num_gws = (hws_gws_support &&
+	dev->node_props.num_gws = (dev->gpu->gws &&
 		dev->gpu->dqm->sched_policy != KFD_SCHED_POLICY_NO_HWS) ?
 		amdgpu_amdkfd_get_num_gws(dev->gpu->kgd) : 0;
 	dev->node_props.num_cp_queues = get_cp_queues_num(dev->gpu->dqm);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
index 46eeecaf1b68..0c51bd3dcd59 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
@@ -41,7 +41,6 @@
 #define HSA_CAP_WATCH_POINTS_TOTALBITS_SHIFT	8
 #define HSA_CAP_DOORBELL_TYPE_TOTALBITS_MASK	0x00003000
 #define HSA_CAP_DOORBELL_TYPE_TOTALBITS_SHIFT	12
-#define HSA_CAP_RESERVED			0xffffc000
 
 #define HSA_CAP_DOORBELL_TYPE_PRE_1_0		0x0
 #define HSA_CAP_DOORBELL_TYPE_1_0		0x1
@@ -51,6 +50,10 @@
 #define HSA_CAP_SRAM_EDCSUPPORTED		0x00080000
 #define HSA_CAP_MEM_EDCSUPPORTED		0x00100000
 #define HSA_CAP_RASEVENTNOTIFY			0x00200000
+#define HSA_CAP_ASIC_REVISION_MASK		0x03c00000
+#define HSA_CAP_ASIC_REVISION_SHIFT		22
+
+#define HSA_CAP_RESERVED			0xfc078000
 
 struct kfd_node_properties {
 	uint64_t hive_id;
diff --git a/drivers/gpu/drm/amd/display/Kconfig b/drivers/gpu/drm/amd/display/Kconfig
index 87858bc57e64..1911a34cc060 100644
--- a/drivers/gpu/drm/amd/display/Kconfig
+++ b/drivers/gpu/drm/amd/display/Kconfig
@@ -21,16 +21,12 @@ config DRM_AMD_DC_HDCP
 	bool "Enable HDCP support in DC"
 	depends on DRM_AMD_DC
 	help
-	 Choose this option
-	 if you want to support
-	 HDCP authentication
+	  Choose this option if you want to support HDCP authentication.
 
 config DEBUG_KERNEL_DC
 	bool "Enable kgdb break in DC"
 	depends on DRM_AMD_DC
 	help
-	  Choose this option
-	  if you want to hit
-	  kdgb_break in assert.
+	  Choose this option if you want to hit kdgb_break in assert.
 
 endmenu
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index c5ba5d46a148..d97095f5f66b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -825,8 +825,9 @@ static int dm_dmub_hw_init(struct amdgpu_device *adev)
 				fw_inst_const_size);
 	}
 
-	memcpy(fb_info->fb[DMUB_WINDOW_2_BSS_DATA].cpu_addr, fw_bss_data,
-	       fw_bss_data_size);
+	if (fw_bss_data_size)
+		memcpy(fb_info->fb[DMUB_WINDOW_2_BSS_DATA].cpu_addr,
+		       fw_bss_data, fw_bss_data_size);
 
 	/* Copy firmware bios info into FB memory. */
 	memcpy(fb_info->fb[DMUB_WINDOW_3_VBIOS].cpu_addr, adev->bios,
@@ -1265,6 +1266,10 @@ static int dm_dmub_sw_init(struct amdgpu_device *adev)
 		adev->dm.dmub_fw->data +
 		le32_to_cpu(hdr->header.ucode_array_offset_bytes) +
 		le32_to_cpu(hdr->inst_const_bytes);
+	region_params.fw_inst_const =
+		adev->dm.dmub_fw->data +
+		le32_to_cpu(hdr->header.ucode_array_offset_bytes) +
+		PSP_HEADER_BYTES;
 
 	status = dmub_srv_calc_region_info(dmub_srv, &region_params,
 					   &region_info);
@@ -3304,7 +3309,7 @@ static int fill_dc_scaling_info(const struct drm_plane_state *state,
 }
 
 static int get_fb_info(const struct amdgpu_framebuffer *amdgpu_fb,
-		       uint64_t *tiling_flags)
+		       uint64_t *tiling_flags, bool *tmz_surface)
 {
 	struct amdgpu_bo *rbo = gem_to_amdgpu_bo(amdgpu_fb->base.obj[0]);
 	int r = amdgpu_bo_reserve(rbo, false);
@@ -3319,6 +3324,9 @@ static int get_fb_info(const struct amdgpu_framebuffer *amdgpu_fb,
 	if (tiling_flags)
 		amdgpu_bo_get_tiling_flags(rbo, tiling_flags);
 
+	if (tmz_surface)
+		*tmz_surface = amdgpu_bo_encrypted(rbo);
+
 	amdgpu_bo_unreserve(rbo);
 
 	return r;
@@ -3340,7 +3348,8 @@ fill_plane_dcc_attributes(struct amdgpu_device *adev,
 			  const union dc_tiling_info *tiling_info,
 			  const uint64_t info,
 			  struct dc_plane_dcc_param *dcc,
-			  struct dc_plane_address *address)
+			  struct dc_plane_address *address,
+			  bool force_disable_dcc)
 {
 	struct dc *dc = adev->dm.dc;
 	struct dc_dcc_surface_param input;
@@ -3352,6 +3361,9 @@ fill_plane_dcc_attributes(struct amdgpu_device *adev,
 	memset(&input, 0, sizeof(input));
 	memset(&output, 0, sizeof(output));
 
+	if (force_disable_dcc)
+		return 0;
+
 	if (!offset)
 		return 0;
 
@@ -3401,7 +3413,9 @@ fill_plane_buffer_attributes(struct amdgpu_device *adev,
 			     union dc_tiling_info *tiling_info,
 			     struct plane_size *plane_size,
 			     struct dc_plane_dcc_param *dcc,
-			     struct dc_plane_address *address)
+			     struct dc_plane_address *address,
+			     bool tmz_surface,
+			     bool force_disable_dcc)
 {
 	const struct drm_framebuffer *fb = &afb->base;
 	int ret;
@@ -3411,6 +3425,8 @@ fill_plane_buffer_attributes(struct amdgpu_device *adev,
 	memset(dcc, 0, sizeof(*dcc));
 	memset(address, 0, sizeof(*address));
 
+	address->tmz_surface = tmz_surface;
+
 	if (format < SURFACE_PIXEL_FORMAT_VIDEO_BEGIN) {
 		plane_size->surface_size.x = 0;
 		plane_size->surface_size.y = 0;
@@ -3507,7 +3523,8 @@ fill_plane_buffer_attributes(struct amdgpu_device *adev,
 
 		ret = fill_plane_dcc_attributes(adev, afb, format, rotation,
 						plane_size, tiling_info,
-						tiling_flags, dcc, address);
+						tiling_flags, dcc, address,
+						force_disable_dcc);
 		if (ret)
 			return ret;
 	}
@@ -3599,7 +3616,9 @@ fill_dc_plane_info_and_addr(struct amdgpu_device *adev,
 			    const struct drm_plane_state *plane_state,
 			    const uint64_t tiling_flags,
 			    struct dc_plane_info *plane_info,
-			    struct dc_plane_address *address)
+			    struct dc_plane_address *address,
+			    bool tmz_surface,
+			    bool force_disable_dcc)
 {
 	const struct drm_framebuffer *fb = plane_state->fb;
 	const struct amdgpu_framebuffer *afb =
@@ -3681,7 +3700,8 @@ fill_dc_plane_info_and_addr(struct amdgpu_device *adev,
 					   plane_info->rotation, tiling_flags,
 					   &plane_info->tiling_info,
 					   &plane_info->plane_size,
-					   &plane_info->dcc, address);
+					   &plane_info->dcc, address, tmz_surface,
+					   force_disable_dcc);
 	if (ret)
 		return ret;
 
@@ -3704,6 +3724,8 @@ static int fill_dc_plane_attributes(struct amdgpu_device *adev,
 	struct dc_plane_info plane_info;
 	uint64_t tiling_flags;
 	int ret;
+	bool tmz_surface = false;
+	bool force_disable_dcc = false;
 
 	ret = fill_dc_scaling_info(plane_state, &scaling_info);
 	if (ret)
@@ -3714,13 +3736,16 @@ static int fill_dc_plane_attributes(struct amdgpu_device *adev,
 	dc_plane_state->clip_rect = scaling_info.clip_rect;
 	dc_plane_state->scaling_quality = scaling_info.scaling_quality;
 
-	ret = get_fb_info(amdgpu_fb, &tiling_flags);
+	ret = get_fb_info(amdgpu_fb, &tiling_flags, &tmz_surface);
 	if (ret)
 		return ret;
 
+	force_disable_dcc = adev->asic_type == CHIP_RAVEN && adev->in_suspend;
 	ret = fill_dc_plane_info_and_addr(adev, plane_state, tiling_flags,
 					  &plane_info,
-					  &dc_plane_state->address);
+					  &dc_plane_state->address,
+					  tmz_surface,
+					  force_disable_dcc);
 	if (ret)
 		return ret;
 
@@ -4324,14 +4349,10 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector,
 
 	if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A)
 		mod_build_hf_vsif_infopacket(stream, &stream->vsp_infopacket, false, false);
-	if (stream->link->psr_feature_enabled)	{
+	if (stream->link->psr_settings.psr_feature_enabled)	{
 		struct dc  *core_dc = stream->link->ctx->dc;
 
 		if (dc_is_dmcu_initialized(core_dc)) {
-			struct dmcu *dmcu = core_dc->res_pool->dmcu;
-
-			stream->psr_version = dmcu->dmcu_version.psr_version;
-
 			//
 			// should decide stream support vsc sdp colorimetry capability
 			// before building vsc info packet
@@ -4736,6 +4757,14 @@ amdgpu_dm_connector_late_register(struct drm_connector *connector)
 			return r;
 	}
 
+	if ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
+	    (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+		amdgpu_dm_connector->dm_dp_aux.aux.dev = connector->kdev;
+		r = drm_dp_aux_register(&amdgpu_dm_connector->dm_dp_aux.aux);
+		if (r)
+			return r;
+	}
+
 #if defined(CONFIG_DEBUG_FS)
 	connector_debugfs_init(amdgpu_dm_connector);
 #endif
@@ -5342,6 +5371,8 @@ static int dm_plane_helper_prepare_fb(struct drm_plane *plane,
 	uint64_t tiling_flags;
 	uint32_t domain;
 	int r;
+	bool tmz_surface = false;
+	bool force_disable_dcc = false;
 
 	dm_plane_state_old = to_dm_plane_state(plane->state);
 	dm_plane_state_new = to_dm_plane_state(new_state);
@@ -5390,6 +5421,8 @@ static int dm_plane_helper_prepare_fb(struct drm_plane *plane,
 
 	amdgpu_bo_get_tiling_flags(rbo, &tiling_flags);
 
+	tmz_surface = amdgpu_bo_encrypted(rbo);
+
 	ttm_eu_backoff_reservation(&ticket, &list);
 
 	afb->address = amdgpu_bo_gpu_offset(rbo);
@@ -5400,11 +5433,13 @@ static int dm_plane_helper_prepare_fb(struct drm_plane *plane,
 			dm_plane_state_old->dc_state != dm_plane_state_new->dc_state) {
 		struct dc_plane_state *plane_state = dm_plane_state_new->dc_state;
 
+		force_disable_dcc = adev->asic_type == CHIP_RAVEN && adev->in_suspend;
 		fill_plane_buffer_attributes(
 			adev, afb, plane_state->format, plane_state->rotation,
 			tiling_flags, &plane_state->tiling_info,
 			&plane_state->plane_size, &plane_state->dcc,
-			&plane_state->address);
+			&plane_state->address, tmz_surface,
+			force_disable_dcc);
 	}
 
 	return 0;
@@ -6577,6 +6612,7 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
 	unsigned long flags;
 	struct amdgpu_bo *abo;
 	uint64_t tiling_flags;
+	bool tmz_surface = false;
 	uint32_t target_vblank, last_flip_vblank;
 	bool vrr_active = amdgpu_dm_vrr_active(acrtc_state);
 	bool pflip_present = false;
@@ -6629,6 +6665,7 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
 		if (new_pcrtc_state->color_mgmt_changed) {
 			bundle->surface_updates[planes_count].gamma = dc_plane->gamma_correction;
 			bundle->surface_updates[planes_count].in_transfer_func = dc_plane->in_transfer_func;
+			bundle->surface_updates[planes_count].gamut_remap_matrix = &dc_plane->gamut_remap_matrix;
 		}
 
 		fill_dc_scaling_info(new_plane_state,
@@ -6671,12 +6708,20 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
 
 		amdgpu_bo_get_tiling_flags(abo, &tiling_flags);
 
+		tmz_surface = amdgpu_bo_encrypted(abo);
+
 		amdgpu_bo_unreserve(abo);
 
 		fill_dc_plane_info_and_addr(
 			dm->adev, new_plane_state, tiling_flags,
 			&bundle->plane_infos[planes_count],
-			&bundle->flip_addrs[planes_count].address);
+			&bundle->flip_addrs[planes_count].address,
+			tmz_surface,
+			false);
+
+		DRM_DEBUG_DRIVER("plane: id=%d dcc_en=%d\n",
+				 new_plane_state->plane->index,
+				 bundle->plane_infos[planes_count].dcc.enable);
 
 		bundle->surface_updates[planes_count].plane_info =
 			&bundle->plane_infos[planes_count];
@@ -6817,7 +6862,7 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
 		}
 		mutex_lock(&dm->dc_lock);
 		if ((acrtc_state->update_type > UPDATE_TYPE_FAST) &&
-				acrtc_state->stream->link->psr_allow_active)
+				acrtc_state->stream->link->psr_settings.psr_allow_active)
 			amdgpu_dm_psr_disable(acrtc_state->stream);
 
 		dc_commit_updates_for_stream(dm->dc,
@@ -6828,12 +6873,12 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
 						     dc_state);
 
 		if ((acrtc_state->update_type > UPDATE_TYPE_FAST) &&
-						acrtc_state->stream->psr_version &&
-						!acrtc_state->stream->link->psr_feature_enabled)
+				acrtc_state->stream->link->psr_settings.psr_version != PSR_VERSION_UNSUPPORTED &&
+				!acrtc_state->stream->link->psr_settings.psr_feature_enabled)
 			amdgpu_dm_link_setup_psr(acrtc_state->stream);
 		else if ((acrtc_state->update_type == UPDATE_TYPE_FAST) &&
-						acrtc_state->stream->link->psr_feature_enabled &&
-						!acrtc_state->stream->link->psr_allow_active) {
+				acrtc_state->stream->link->psr_settings.psr_feature_enabled &&
+				!acrtc_state->stream->link->psr_settings.psr_allow_active) {
 			amdgpu_dm_psr_enable(acrtc_state->stream);
 		}
 
@@ -7147,7 +7192,7 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
 			DRM_DEBUG_DRIVER("Atomic commit: RESET. crtc id %d:[%p]\n", acrtc->crtc_id, acrtc);
 			/* i.e. reset mode */
 			if (dm_old_crtc_state->stream) {
-				if (dm_old_crtc_state->stream->link->psr_allow_active)
+				if (dm_old_crtc_state->stream->link->psr_settings.psr_allow_active)
 					amdgpu_dm_psr_disable(dm_old_crtc_state->stream);
 
 				remove_stream(adev, acrtc, dm_old_crtc_state->stream);
@@ -8044,6 +8089,7 @@ dm_determine_update_type_for_commit(struct amdgpu_display_manager *dm,
 			struct dc_flip_addrs *flip_addr = &bundle->flip_addrs[num_plane];
 			struct dc_scaling_info *scaling_info = &bundle->scaling_infos[num_plane];
 			uint64_t tiling_flags;
+			bool tmz_surface = false;
 
 			new_plane_crtc = new_plane_state->crtc;
 			new_dm_plane_state = to_dm_plane_state(new_plane_state);
@@ -8073,6 +8119,8 @@ dm_determine_update_type_for_commit(struct amdgpu_display_manager *dm,
 						new_dm_plane_state->dc_state->gamma_correction;
 				bundle->surface_updates[num_plane].in_transfer_func =
 						new_dm_plane_state->dc_state->in_transfer_func;
+				bundle->surface_updates[num_plane].gamut_remap_matrix =
+						&new_dm_plane_state->dc_state->gamut_remap_matrix;
 				bundle->stream_update.gamut_remap =
 						&new_dm_crtc_state->stream->gamut_remap_matrix;
 				bundle->stream_update.output_csc_transform =
@@ -8089,14 +8137,15 @@ dm_determine_update_type_for_commit(struct amdgpu_display_manager *dm,
 			bundle->surface_updates[num_plane].scaling_info = scaling_info;
 
 			if (amdgpu_fb) {
-				ret = get_fb_info(amdgpu_fb, &tiling_flags);
+				ret = get_fb_info(amdgpu_fb, &tiling_flags, &tmz_surface);
 				if (ret)
 					goto cleanup;
 
 				ret = fill_dc_plane_info_and_addr(
 					dm->adev, new_plane_state, tiling_flags,
 					plane_info,
-					&flip_addr->address);
+					&flip_addr->address, tmz_surface,
+					false);
 				if (ret)
 					goto cleanup;
 
@@ -8596,8 +8645,17 @@ static void amdgpu_dm_set_psr_caps(struct dc_link *link)
 		return;
 	if (dm_helpers_dp_read_dpcd(NULL, link, DP_PSR_SUPPORT,
 					dpcd_data, sizeof(dpcd_data))) {
-		link->psr_feature_enabled = dpcd_data[0] ? true:false;
-		DRM_INFO("PSR support:%d\n", link->psr_feature_enabled);
+		link->dpcd_caps.psr_caps.psr_version = dpcd_data[0];
+
+		if (dpcd_data[0] == 0) {
+			link->psr_settings.psr_version = PSR_VERSION_UNSUPPORTED;
+			link->psr_settings.psr_feature_enabled = false;
+		} else {
+			link->psr_settings.psr_version = PSR_VERSION_1;
+			link->psr_settings.psr_feature_enabled = true;
+		}
+
+		DRM_INFO("PSR support:%d\n", link->psr_settings.psr_feature_enabled);
 	}
 }
 
@@ -8621,7 +8679,7 @@ static bool amdgpu_dm_link_setup_psr(struct dc_stream_state *stream)
 	link = stream->link;
 	dc = link->ctx->dc;
 
-	psr_config.psr_version = dc->res_pool->dmcu->dmcu_version.psr_version;
+	psr_config.psr_version = link->dpcd_caps.psr_caps.psr_version;
 
 	if (psr_config.psr_version > 0) {
 		psr_config.psr_exit_link_training_required = 0x1;
@@ -8633,7 +8691,7 @@ static bool amdgpu_dm_link_setup_psr(struct dc_stream_state *stream)
 		ret = dc_link_setup_psr(link, stream, &psr_config, &psr_context);
 
 	}
-	DRM_DEBUG_DRIVER("PSR link: %d\n",	link->psr_feature_enabled);
+	DRM_DEBUG_DRIVER("PSR link: %d\n",	link->psr_settings.psr_feature_enabled);
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
index 2233d293a707..4dfb6b55bb2e 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
@@ -239,7 +239,8 @@ static int __set_output_tf(struct dc_transfer_func *func,
 		 * instead to simulate this.
 		 */
 		gamma->type = GAMMA_CUSTOM;
-		res = mod_color_calculate_degamma_params(func, gamma, true);
+		res = mod_color_calculate_degamma_params(NULL, func,
+							gamma, true);
 	} else {
 		/*
 		 * Assume sRGB. The actual mapping will depend on whether the
@@ -271,7 +272,7 @@ static int __set_input_tf(struct dc_transfer_func *func,
 
 	__drm_lut_to_dc_gamma(lut, gamma, false);
 
-	res = mod_color_calculate_degamma_params(func, gamma, true);
+	res = mod_color_calculate_degamma_params(NULL, func, gamma, true);
 	dc_gamma_release(&gamma);
 
 	return res ? 0 : -ENOMEM;
@@ -419,9 +420,21 @@ int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc,
 				      struct dc_plane_state *dc_plane_state)
 {
 	const struct drm_color_lut *degamma_lut;
+	enum dc_transfer_func_predefined tf = TRANSFER_FUNCTION_SRGB;
 	uint32_t degamma_size;
 	int r;
 
+	/* Get the correct base transfer function for implicit degamma. */
+	switch (dc_plane_state->format) {
+	case SURFACE_PIXEL_FORMAT_VIDEO_420_YCbCr:
+	case SURFACE_PIXEL_FORMAT_VIDEO_420_YCrCb:
+		/* DC doesn't have a transfer function for BT601 specifically. */
+		tf = TRANSFER_FUNCTION_BT709;
+		break;
+	default:
+		break;
+	}
+
 	if (crtc->cm_has_degamma) {
 		degamma_lut = __extract_blob_lut(crtc->base.degamma_lut,
 						 &degamma_size);
@@ -455,8 +468,7 @@ int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc,
 		 * map these to the atomic one instead.
 		 */
 		if (crtc->cm_is_degamma_srgb)
-			dc_plane_state->in_transfer_func->tf =
-				TRANSFER_FUNCTION_SRGB;
+			dc_plane_state->in_transfer_func->tf = tf;
 		else
 			dc_plane_state->in_transfer_func->tf =
 				TRANSFER_FUNCTION_LINEAR;
@@ -471,7 +483,12 @@ int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc,
 		 * in linear space. Assume that the input is sRGB.
 		 */
 		dc_plane_state->in_transfer_func->type = TF_TYPE_PREDEFINED;
-		dc_plane_state->in_transfer_func->tf = TRANSFER_FUNCTION_SRGB;
+		dc_plane_state->in_transfer_func->tf = tf;
+
+		if (tf != TRANSFER_FUNCTION_SRGB &&
+		    !mod_color_calculate_degamma_params(NULL,
+			    dc_plane_state->in_transfer_func, NULL, false))
+			return -ENOMEM;
 	} else {
 		/* ...Otherwise we can just bypass the DGM block. */
 		dc_plane_state->in_transfer_func->type = TF_TYPE_BYPASS;
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index 0461fecd68db..b3b7efd973ca 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -838,6 +838,44 @@ static int vrr_range_show(struct seq_file *m, void *data)
 	return 0;
 }
 
+#ifdef CONFIG_DRM_AMD_DC_HDCP
+/*
+ * Returns the HDCP capability of the Display (1.4 for now).
+ *
+ * NOTE* Not all HDMI displays report their HDCP caps even when they are capable.
+ * Since its rare for a display to not be HDCP 1.4 capable, we set HDMI as always capable.
+ *
+ * Example usage: cat /sys/kernel/debug/dri/0/DP-1/hdcp_sink_capability
+ *		or cat /sys/kernel/debug/dri/0/HDMI-A-1/hdcp_sink_capability
+ */
+static int hdcp_sink_capability_show(struct seq_file *m, void *data)
+{
+	struct drm_connector *connector = m->private;
+	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
+	bool hdcp_cap, hdcp2_cap;
+
+	if (connector->status != connector_status_connected)
+		return -ENODEV;
+
+	seq_printf(m, "%s:%d HDCP version: ", connector->name, connector->base.id);
+
+	hdcp_cap = dc_link_is_hdcp14(aconnector->dc_link);
+	hdcp2_cap = dc_link_is_hdcp22(aconnector->dc_link);
+
+
+	if (hdcp_cap)
+		seq_printf(m, "%s ", "HDCP1.4");
+	if (hdcp2_cap)
+		seq_printf(m, "%s ", "HDCP2.2");
+
+	if (!hdcp_cap && !hdcp2_cap)
+		seq_printf(m, "%s ", "None");
+
+	seq_puts(m, "\n");
+
+	return 0;
+}
+#endif
 /* function description
  *
  * generic SDP message access for testing
@@ -964,6 +1002,9 @@ DEFINE_SHOW_ATTRIBUTE(dmub_fw_state);
 DEFINE_SHOW_ATTRIBUTE(dmub_tracebuffer);
 DEFINE_SHOW_ATTRIBUTE(output_bpc);
 DEFINE_SHOW_ATTRIBUTE(vrr_range);
+#ifdef CONFIG_DRM_AMD_DC_HDCP
+DEFINE_SHOW_ATTRIBUTE(hdcp_sink_capability);
+#endif
 
 static const struct file_operations dp_link_settings_debugfs_fops = {
 	.owner = THIS_MODULE,
@@ -1019,12 +1060,23 @@ static const struct {
 		{"test_pattern", &dp_phy_test_pattern_fops},
 		{"output_bpc", &output_bpc_fops},
 		{"vrr_range", &vrr_range_fops},
+#ifdef CONFIG_DRM_AMD_DC_HDCP
+		{"hdcp_sink_capability", &hdcp_sink_capability_fops},
+#endif
 		{"sdp_message", &sdp_message_fops},
 		{"aux_dpcd_address", &dp_dpcd_address_debugfs_fops},
 		{"aux_dpcd_size", &dp_dpcd_size_debugfs_fops},
 		{"aux_dpcd_data", &dp_dpcd_data_debugfs_fops}
 };
 
+#ifdef CONFIG_DRM_AMD_DC_HDCP
+static const struct {
+	char *name;
+	const struct file_operations *fops;
+} hdmi_debugfs_entries[] = {
+		{"hdcp_sink_capability", &hdcp_sink_capability_fops}
+};
+#endif
 /*
  * Force YUV420 output if available from the given mode
  */
@@ -1093,6 +1145,15 @@ void connector_debugfs_init(struct amdgpu_dm_connector *connector)
 	connector->debugfs_dpcd_address = 0;
 	connector->debugfs_dpcd_size = 0;
 
+#ifdef CONFIG_DRM_AMD_DC_HDCP
+	if (connector->base.connector_type == DRM_MODE_CONNECTOR_HDMIA) {
+		for (i = 0; i < ARRAY_SIZE(hdmi_debugfs_entries); i++) {
+			debugfs_create_file(hdmi_debugfs_entries[i].name,
+					    0644, dir, connector,
+					    hdmi_debugfs_entries[i].fops);
+		}
+	}
+#endif
 }
 
 /*
@@ -1167,8 +1228,9 @@ static int current_backlight_read(struct seq_file *m, void *data)
 	struct drm_info_node *node = (struct drm_info_node *)m->private;
 	struct drm_device *dev = node->minor->dev;
 	struct amdgpu_device *adev = dev->dev_private;
-	struct dc *dc = adev->dm.dc;
-	unsigned int backlight = dc_get_current_backlight_pwm(dc);
+	struct amdgpu_display_manager *dm = &adev->dm;
+
+	unsigned int backlight = dc_link_get_backlight_level(dm->backlight_link);
 
 	seq_printf(m, "0x%x\n", backlight);
 	return 0;
@@ -1184,8 +1246,9 @@ static int target_backlight_read(struct seq_file *m, void *data)
 	struct drm_info_node *node = (struct drm_info_node *)m->private;
 	struct drm_device *dev = node->minor->dev;
 	struct amdgpu_device *adev = dev->dev_private;
-	struct dc *dc = adev->dm.dc;
-	unsigned int backlight = dc_get_target_backlight_pwm(dc);
+	struct amdgpu_display_manager *dm = &adev->dm;
+
+	unsigned int backlight = dc_link_get_target_backlight_pwm(dm->backlight_link);
 
 	seq_printf(m, "0x%x\n", backlight);
 	return 0;
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
index c20fb08c450b..c407f06cd1f5 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -445,7 +445,7 @@ bool dm_helpers_dp_read_dpcd(
 	struct amdgpu_dm_connector *aconnector = link->priv;
 
 	if (!aconnector) {
-		DRM_ERROR("Failed to find connector for link!");
+		DC_LOG_DC("Failed to find connector for link!\n");
 		return false;
 	}
 
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index d2917759b7ab..ae0a7ef1d595 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -41,53 +41,10 @@
 #include "amdgpu_dm_debugfs.h"
 #endif
 
-
 #if defined(CONFIG_DRM_AMD_DC_DCN)
 #include "dc/dcn20/dcn20_resource.h"
 #endif
 
-/* #define TRACE_DPCD */
-
-#ifdef TRACE_DPCD
-#define SIDE_BAND_MSG(address) (address >= DP_SIDEBAND_MSG_DOWN_REQ_BASE && address < DP_SINK_COUNT_ESI)
-
-static inline char *side_band_msg_type_to_str(uint32_t address)
-{
-	static char str[10] = {0};
-
-	if (address < DP_SIDEBAND_MSG_UP_REP_BASE)
-		strcpy(str, "DOWN_REQ");
-	else if (address < DP_SIDEBAND_MSG_DOWN_REP_BASE)
-		strcpy(str, "UP_REP");
-	else if (address < DP_SIDEBAND_MSG_UP_REQ_BASE)
-		strcpy(str, "DOWN_REP");
-	else
-		strcpy(str, "UP_REQ");
-
-	return str;
-}
-
-static void log_dpcd(uint8_t type,
-		     uint32_t address,
-		     uint8_t *data,
-		     uint32_t size,
-		     bool res)
-{
-	DRM_DEBUG_KMS("Op: %s, addr: %04x, SideBand Msg: %s, Op res: %s\n",
-			(type == DP_AUX_NATIVE_READ) ||
-			(type == DP_AUX_I2C_READ) ?
-					"Read" : "Write",
-			address,
-			SIDE_BAND_MSG(address) ?
-					side_band_msg_type_to_str(address) : "Nop",
-			res ? "OK" : "Fail");
-
-	if (res) {
-		print_hex_dump(KERN_INFO, "Body: ", DUMP_PREFIX_NONE, 16, 1, data, size, false);
-	}
-}
-#endif
-
 static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux,
 				  struct drm_dp_aux_msg *msg)
 {
@@ -136,17 +93,23 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux,
 static void
 dm_dp_mst_connector_destroy(struct drm_connector *connector)
 {
-	struct amdgpu_dm_connector *amdgpu_dm_connector = to_amdgpu_dm_connector(connector);
-	struct amdgpu_encoder *amdgpu_encoder = amdgpu_dm_connector->mst_encoder;
+	struct amdgpu_dm_connector *aconnector =
+		to_amdgpu_dm_connector(connector);
+	struct amdgpu_encoder *amdgpu_encoder = aconnector->mst_encoder;
 
-	kfree(amdgpu_dm_connector->edid);
-	amdgpu_dm_connector->edid = NULL;
+	if (aconnector->dc_sink) {
+		dc_link_remove_remote_sink(aconnector->dc_link,
+					   aconnector->dc_sink);
+		dc_sink_release(aconnector->dc_sink);
+	}
+
+	kfree(aconnector->edid);
 
 	drm_encoder_cleanup(&amdgpu_encoder->base);
 	kfree(amdgpu_encoder);
 	drm_connector_cleanup(connector);
-	drm_dp_mst_put_port_malloc(amdgpu_dm_connector->port);
-	kfree(amdgpu_dm_connector);
+	drm_dp_mst_put_port_malloc(aconnector->port);
+	kfree(aconnector);
 }
 
 static int
@@ -435,40 +398,13 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 	 */
 	amdgpu_dm_connector_funcs_reset(connector);
 
-	DRM_INFO("DM_MST: added connector: %p [id: %d] [master: %p]\n",
-		 aconnector, connector->base.id, aconnector->mst_port);
-
 	drm_dp_mst_get_port_malloc(port);
 
-	DRM_DEBUG_KMS(":%d\n", connector->base.id);
-
 	return connector;
 }
 
-static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
-					struct drm_connector *connector)
-{
-	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
-
-	DRM_INFO("DM_MST: Disabling connector: %p [id: %d] [master: %p]\n",
-		 aconnector, connector->base.id, aconnector->mst_port);
-
-	if (aconnector->dc_sink) {
-		amdgpu_dm_update_freesync_caps(connector, NULL);
-		dc_link_remove_remote_sink(aconnector->dc_link,
-					   aconnector->dc_sink);
-		dc_sink_release(aconnector->dc_sink);
-		aconnector->dc_sink = NULL;
-		aconnector->dc_link->cur_link_settings.lane_count = 0;
-	}
-
-	drm_connector_unregister(connector);
-	drm_connector_put(connector);
-}
-
 static const struct drm_dp_mst_topology_cbs dm_mst_cbs = {
 	.add_connector = dm_dp_add_mst_connector,
-	.destroy_connector = dm_dp_destroy_mst_connector,
 };
 
 void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm,
diff --git a/drivers/gpu/drm/amd/display/dc/basics/Makefile b/drivers/gpu/drm/amd/display/dc/basics/Makefile
index 7ad0cad0f4ef..01b99e0d788e 100644
--- a/drivers/gpu/drm/amd/display/dc/basics/Makefile
+++ b/drivers/gpu/drm/amd/display/dc/basics/Makefile
@@ -24,8 +24,7 @@
 # It provides the general basic services required by other DAL
 # subcomponents.
 
-BASICS = conversion.o fixpt31_32.o \
-	log_helpers.o vector.o dc_common.o
+BASICS = conversion.o fixpt31_32.o vector.o dc_common.o
 
 AMD_DAL_BASICS = $(addprefix $(AMDDALPATH)/dc/basics/,$(BASICS))
 
diff --git a/drivers/gpu/drm/amd/display/dc/basics/log_helpers.c b/drivers/gpu/drm/amd/display/dc/basics/log_helpers.c
deleted file mode 100644
index 26583f346c39..000000000000
--- a/drivers/gpu/drm/amd/display/dc/basics/log_helpers.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright 2012-16 Advanced Micro Devices, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: AMD
- *
- */
-
-#include "core_types.h"
-#include "logger.h"
-#include "include/logger_interface.h"
-#include "dm_helpers.h"
-
-void dc_conn_log_hex_linux(const uint8_t *hex_data, int hex_data_count)
-{
-	int i;
-
-	if (hex_data)
-		for (i = 0; i < hex_data_count; i++)
-			DC_LOG_DEBUG("%2.2X ", hex_data[i]);
-}
-
diff --git a/drivers/gpu/drm/amd/display/dc/bios/command_table2.c b/drivers/gpu/drm/amd/display/dc/bios/command_table2.c
index 8edc2506d49e..bed91572f82a 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/command_table2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/command_table2.c
@@ -113,13 +113,19 @@ static void encoder_control_dmcub(
 		struct dc_dmub_srv *dmcub,
 		struct dig_encoder_stream_setup_parameters_v1_5 *dig)
 {
-	struct dmub_rb_cmd_digx_encoder_control encoder_control = { 0 };
+	union dmub_rb_cmd cmd;
 
-	encoder_control.header.type = DMUB_CMD__VBIOS;
-	encoder_control.header.sub_type = DMUB_CMD__VBIOS_DIGX_ENCODER_CONTROL;
-	encoder_control.encoder_control.dig.stream_param = *dig;
+	memset(&cmd, 0, sizeof(cmd));
 
-	dc_dmub_srv_cmd_queue(dmcub, &encoder_control.header);
+	cmd.digx_encoder_control.header.type = DMUB_CMD__VBIOS;
+	cmd.digx_encoder_control.header.sub_type =
+		DMUB_CMD__VBIOS_DIGX_ENCODER_CONTROL;
+	cmd.digx_encoder_control.header.payload_bytes =
+		sizeof(cmd.digx_encoder_control) -
+		sizeof(cmd.digx_encoder_control.header);
+	cmd.digx_encoder_control.encoder_control.dig.stream_param = *dig;
+
+	dc_dmub_srv_cmd_queue(dmcub, &cmd);
 	dc_dmub_srv_cmd_execute(dmcub);
 	dc_dmub_srv_wait_idle(dmcub);
 }
@@ -238,14 +244,19 @@ static void transmitter_control_dmcub(
 		struct dc_dmub_srv *dmcub,
 		struct dig_transmitter_control_parameters_v1_6 *dig)
 {
-	struct dmub_rb_cmd_dig1_transmitter_control transmitter_control;
+	union dmub_rb_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
 
-	transmitter_control.header.type = DMUB_CMD__VBIOS;
-	transmitter_control.header.sub_type =
+	cmd.dig1_transmitter_control.header.type = DMUB_CMD__VBIOS;
+	cmd.dig1_transmitter_control.header.sub_type =
 		DMUB_CMD__VBIOS_DIG1_TRANSMITTER_CONTROL;
-	transmitter_control.transmitter_control.dig = *dig;
+	cmd.dig1_transmitter_control.header.payload_bytes =
+		sizeof(cmd.dig1_transmitter_control) -
+		sizeof(cmd.dig1_transmitter_control.header);
+	cmd.dig1_transmitter_control.transmitter_control.dig = *dig;
 
-	dc_dmub_srv_cmd_queue(dmcub, &transmitter_control.header);
+	dc_dmub_srv_cmd_queue(dmcub, &cmd);
 	dc_dmub_srv_cmd_execute(dmcub);
 	dc_dmub_srv_wait_idle(dmcub);
 }
@@ -339,13 +350,18 @@ static void set_pixel_clock_dmcub(
 		struct dc_dmub_srv *dmcub,
 		struct set_pixel_clock_parameter_v1_7 *clk)
 {
-	struct dmub_rb_cmd_set_pixel_clock pixel_clock = { 0 };
+	union dmub_rb_cmd cmd;
 
-	pixel_clock.header.type = DMUB_CMD__VBIOS;
-	pixel_clock.header.sub_type = DMUB_CMD__VBIOS_SET_PIXEL_CLOCK;
-	pixel_clock.pixel_clock.clk = *clk;
+	memset(&cmd, 0, sizeof(cmd));
 
-	dc_dmub_srv_cmd_queue(dmcub, &pixel_clock.header);
+	cmd.set_pixel_clock.header.type = DMUB_CMD__VBIOS;
+	cmd.set_pixel_clock.header.sub_type = DMUB_CMD__VBIOS_SET_PIXEL_CLOCK;
+	cmd.set_pixel_clock.header.payload_bytes =
+		sizeof(cmd.set_pixel_clock) -
+		sizeof(cmd.set_pixel_clock.header);
+	cmd.set_pixel_clock.pixel_clock.clk = *clk;
+
+	dc_dmub_srv_cmd_queue(dmcub, &cmd);
 	dc_dmub_srv_cmd_execute(dmcub);
 	dc_dmub_srv_wait_idle(dmcub);
 }
@@ -705,13 +721,19 @@ static void enable_disp_power_gating_dmcub(
 	struct dc_dmub_srv *dmcub,
 	struct enable_disp_power_gating_parameters_v2_1 *pwr)
 {
-	struct dmub_rb_cmd_enable_disp_power_gating power_gating;
+	union dmub_rb_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
 
-	power_gating.header.type = DMUB_CMD__VBIOS;
-	power_gating.header.sub_type = DMUB_CMD__VBIOS_ENABLE_DISP_POWER_GATING;
-	power_gating.power_gating.pwr = *pwr;
+	cmd.enable_disp_power_gating.header.type = DMUB_CMD__VBIOS;
+	cmd.enable_disp_power_gating.header.sub_type =
+		DMUB_CMD__VBIOS_ENABLE_DISP_POWER_GATING;
+	cmd.enable_disp_power_gating.header.payload_bytes =
+		sizeof(cmd.enable_disp_power_gating) -
+		sizeof(cmd.enable_disp_power_gating.header);
+	cmd.enable_disp_power_gating.power_gating.pwr = *pwr;
 
-	dc_dmub_srv_cmd_queue(dmcub, &power_gating.header);
+	dc_dmub_srv_cmd_queue(dmcub, &cmd);
 	dc_dmub_srv_cmd_execute(dmcub);
 	dc_dmub_srv_wait_idle(dmcub);
 }
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c
index 8ec2dfe45d40..a5c2114e4292 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c
@@ -90,7 +90,7 @@ void clk_mgr_exit_optimized_pwr_state(const struct dc *dc, struct clk_mgr *clk_m
 		dc->hwss.exit_optimized_pwr_state(dc, dc->current_state);
 
 	if (edp_link) {
-		clk_mgr->psr_allow_active_cache = edp_link->psr_allow_active;
+		clk_mgr->psr_allow_active_cache = edp_link->psr_settings.psr_allow_active;
 		dc_link_set_psr_allow_active(edp_link, false, false);
 	}
 
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
index 26db1c5d4e4d..b210f8e9d592 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
@@ -131,7 +131,7 @@ int dce_get_dp_ref_freq_khz(struct clk_mgr *clk_mgr_base)
 	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
 	int dprefclk_wdivider;
 	int dprefclk_src_sel;
-	int dp_ref_clk_khz = 600000;
+	int dp_ref_clk_khz;
 	int target_div;
 
 	/* ASSERT DP Reference Clock source is from DFS*/
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c
index 97b7f32294fd..c320b7af7d34 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c
@@ -97,9 +97,6 @@ int rv1_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_di
 			VBIOSSMC_MSG_SetDispclkFreq,
 			requested_dispclk_khz / 1000);
 
-	/* Actual dispclk set is returned in the parameter register */
-	actual_dispclk_set_mhz = REG_READ(MP1_SMN_C2PMSG_83) * 1000;
-
 	if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) {
 		if (dmcu && dmcu->funcs->is_dmcu_initialized(dmcu)) {
 			if (clk_mgr->dfs_bypass_disp_clk != actual_dispclk_set_mhz)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 8489f1e56892..cf3166f43b58 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -66,6 +66,8 @@
 
 #include "dce/dce_i2c.h"
 
+#include "dmub/inc/dmub_cmd_dal.h"
+
 #define CTX \
 	dc->ctx
 
@@ -348,7 +350,7 @@ bool dc_stream_configure_crc(struct dc *dc, struct dc_stream_state *stream,
 
 	for (i = 0; i < MAX_PIPES; i++) {
 		pipe = &dc->current_state->res_ctx.pipe_ctx[i];
-		if (pipe->stream == stream)
+		if (pipe->stream == stream && !pipe->top_pipe && !pipe->prev_odm_pipe)
 			break;
 	}
 	/* Stream not found */
@@ -365,6 +367,9 @@ bool dc_stream_configure_crc(struct dc *dc, struct dc_stream_state *stream,
 	param.windowb_x_end = pipe->stream->timing.h_addressable;
 	param.windowb_y_end = pipe->stream->timing.v_addressable;
 
+	param.dsc_mode = pipe->stream->timing.flags.DSC ? 1:0;
+	param.odm_mode = pipe->next_odm_pipe ? 1:0;
+
 	/* Default to the union of both windows */
 	param.selection = UNION_WINDOW_A_B;
 	param.continuous_mode = continuous;
@@ -1035,9 +1040,9 @@ static void program_timing_sync(
 				status->timing_sync_info.master = false;
 
 		}
-		/* remove any other pipes with plane as they have already been synced */
+		/* remove any other pipes without plane as they have already been synced */
 		for (j = j + 1; j < group_size; j++) {
-			if (pipe_set[j]->plane_state) {
+			if (!pipe_set[j]->plane_state) {
 				group_size--;
 				pipe_set[j] = pipe_set[group_size];
 				j--;
@@ -2205,7 +2210,9 @@ static void commit_planes_do_stream_update(struct dc *dc,
 
 				if (should_program_abm) {
 					if (*stream_update->abm_level == ABM_LEVEL_IMMEDIATE_DISABLE) {
-						pipe_ctx->stream_res.abm->funcs->set_abm_immediate_disable(pipe_ctx->stream_res.abm);
+						pipe_ctx->stream_res.abm->funcs->set_abm_immediate_disable(
+								pipe_ctx->stream_res.abm,
+								pipe_ctx->stream->link->panel_cntl->inst);
 					} else {
 						pipe_ctx->stream_res.abm->funcs->set_abm_level(
 							pipe_ctx->stream_res.abm, stream->abm_level);
@@ -2641,33 +2648,12 @@ void dc_set_power_state(
 
 void dc_resume(struct dc *dc)
 {
-
 	uint32_t i;
 
 	for (i = 0; i < dc->link_count; i++)
 		core_link_resume(dc->links[i]);
 }
 
-unsigned int dc_get_current_backlight_pwm(struct dc *dc)
-{
-	struct abm *abm = dc->res_pool->abm;
-
-	if (abm)
-		return abm->funcs->get_current_backlight(abm);
-
-	return 0;
-}
-
-unsigned int dc_get_target_backlight_pwm(struct dc *dc)
-{
-	struct abm *abm = dc->res_pool->abm;
-
-	if (abm)
-		return abm->funcs->get_target_backlight(abm);
-
-	return 0;
-}
-
 bool dc_is_dmcu_initialized(struct dc *dc)
 {
 	struct dmcu *dmcu = dc->res_pool->dmcu;
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 67cfff1586e9..67c5342cf89a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -46,10 +46,11 @@
 #include "dmcu.h"
 #include "hw/clk_mgr.h"
 #include "dce/dmub_psr.h"
+#include "dmub/inc/dmub_cmd_dal.h"
+#include "inc/hw/panel_cntl.h"
 
 #define DC_LOGGER_INIT(logger)
 
-
 #define LINK_INFO(...) \
 	DC_LOG_HW_HOTPLUG(  \
 		__VA_ARGS__)
@@ -64,11 +65,11 @@
 enum {
 	PEAK_FACTOR_X1000 = 1006,
 	/*
-	* Some receivers fail to train on first try and are good
-	* on subsequent tries. 2 retries should be plenty. If we
-	* don't have a successful training then we don't expect to
-	* ever get one.
-	*/
+	 * Some receivers fail to train on first try and are good
+	 * on subsequent tries. 2 retries should be plenty. If we
+	 * don't have a successful training then we don't expect to
+	 * ever get one.
+	 */
 	LINK_TRAINING_MAX_VERIFY_RETRY = 2
 };
 
@@ -79,7 +80,7 @@ static void dc_link_destruct(struct dc_link *link)
 {
 	int i;
 
-	if (link->hpd_gpio != NULL) {
+	if (link->hpd_gpio) {
 		dal_gpio_destroy_irq(&link->hpd_gpio);
 		link->hpd_gpio = NULL;
 	}
@@ -87,7 +88,10 @@ static void dc_link_destruct(struct dc_link *link)
 	if (link->ddc)
 		dal_ddc_service_destroy(&link->ddc);
 
-	if(link->link_enc)
+	if (link->panel_cntl)
+		link->panel_cntl->funcs->destroy(&link->panel_cntl);
+
+	if (link->link_enc)
 		link->link_enc->funcs->destroy(&link->link_enc);
 
 	if (link->local_sink)
@@ -98,8 +102,8 @@ static void dc_link_destruct(struct dc_link *link)
 }
 
 struct gpio *get_hpd_gpio(struct dc_bios *dcb,
-		struct graphics_object_id link_id,
-		struct gpio_service *gpio_service)
+			  struct graphics_object_id link_id,
+			  struct gpio_service *gpio_service)
 {
 	enum bp_result bp_result;
 	struct graphics_object_hpd_info hpd_info;
@@ -116,10 +120,9 @@ struct gpio *get_hpd_gpio(struct dc_bios *dcb,
 		return NULL;
 	}
 
-	return dal_gpio_service_create_irq(
-		gpio_service,
-		pin_info.offset,
-		pin_info.mask);
+	return dal_gpio_service_create_irq(gpio_service,
+					   pin_info.offset,
+					   pin_info.mask);
 }
 
 /*
@@ -134,13 +137,10 @@ struct gpio *get_hpd_gpio(struct dc_bios *dcb,
  *  @return
  *     true on success, false otherwise
  */
-static bool program_hpd_filter(
-	const struct dc_link *link)
+static bool program_hpd_filter(const struct dc_link *link)
 {
 	bool result = false;
-
 	struct gpio *hpd;
-
 	int delay_on_connect_in_ms = 0;
 	int delay_on_disconnect_in_ms = 0;
 
@@ -159,10 +159,10 @@ static bool program_hpd_filter(
 	case SIGNAL_TYPE_DISPLAY_PORT_MST:
 		/* Program hpd filter to allow DP signal to settle */
 		/* 500:	not able to detect MST <-> SST switch as HPD is low for
-		 * 	only 100ms on DELL U2413
-		 * 0:	some passive dongle still show aux mode instead of i2c
-		 * 20-50:not enough to hide bouncing HPD with passive dongle.
-		 * 	also see intermittent i2c read issues.
+		 * only 100ms on DELL U2413
+		 * 0: some passive dongle still show aux mode instead of i2c
+		 * 20-50: not enough to hide bouncing HPD with passive dongle.
+		 * also see intermittent i2c read issues.
 		 */
 		delay_on_connect_in_ms = 80;
 		delay_on_disconnect_in_ms = 0;
@@ -175,7 +175,8 @@ static bool program_hpd_filter(
 	}
 
 	/* Obtain HPD handle */
-	hpd = get_hpd_gpio(link->ctx->dc_bios, link->link_id, link->ctx->gpio_service);
+	hpd = get_hpd_gpio(link->ctx->dc_bios, link->link_id,
+			   link->ctx->gpio_service);
 
 	if (!hpd)
 		return result;
@@ -226,8 +227,9 @@ bool dc_link_detect_sink(struct dc_link *link, enum dc_connection_type *type)
 	}
 
 	/* todo: may need to lock gpio access */
-	hpd_pin = get_hpd_gpio(link->ctx->dc_bios, link->link_id, link->ctx->gpio_service);
-	if (hpd_pin == NULL)
+	hpd_pin = get_hpd_gpio(link->ctx->dc_bios, link->link_id,
+			       link->ctx->gpio_service);
+	if (!hpd_pin)
 		goto hpd_gpio_failure;
 
 	dal_gpio_open(hpd_pin, GPIO_MODE_INTERRUPT);
@@ -248,8 +250,7 @@ bool dc_link_detect_sink(struct dc_link *link, enum dc_connection_type *type)
 	return false;
 }
 
-static enum ddc_transaction_type get_ddc_transaction_type(
-		enum signal_type sink_signal)
+static enum ddc_transaction_type get_ddc_transaction_type(enum signal_type sink_signal)
 {
 	enum ddc_transaction_type transaction_type = DDC_TRANSACTION_TYPE_NONE;
 
@@ -270,7 +271,8 @@ static enum ddc_transaction_type get_ddc_transaction_type(
 	case SIGNAL_TYPE_DISPLAY_PORT_MST:
 		/* MST does not use I2COverAux, but there is the
 		 * SPECIAL use case for "immediate dwnstrm device
-		 * access" (EPR#370830). */
+		 * access" (EPR#370830).
+		 */
 		transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX;
 		break;
 
@@ -281,9 +283,8 @@ static enum ddc_transaction_type get_ddc_transaction_type(
 	return transaction_type;
 }
 
-static enum signal_type get_basic_signal_type(
-	struct graphics_object_id encoder,
-	struct graphics_object_id downstream)
+static enum signal_type get_basic_signal_type(struct graphics_object_id encoder,
+					      struct graphics_object_id downstream)
 {
 	if (downstream.type == OBJECT_TYPE_CONNECTOR) {
 		switch (downstream.id) {
@@ -369,10 +370,11 @@ bool dc_link_is_dp_sink_present(struct dc_link *link)
 	/* Open GPIO and set it to I2C mode */
 	/* Note: this GpioMode_Input will be converted
 	 * to GpioConfigType_I2cAuxDualMode in GPIO component,
-	 * which indicates we need additional delay */
+	 * which indicates we need additional delay
+	 */
 
-	if (GPIO_RESULT_OK != dal_ddc_open(
-		ddc, GPIO_MODE_INPUT, GPIO_DDC_CONFIG_TYPE_MODE_I2C)) {
+	if (dal_ddc_open(ddc, GPIO_MODE_INPUT,
+			 GPIO_DDC_CONFIG_TYPE_MODE_I2C) != GPIO_RESULT_OK) {
 		dal_ddc_close(ddc);
 
 		return present;
@@ -406,25 +408,25 @@ bool dc_link_is_dp_sink_present(struct dc_link *link)
  * @brief
  * Detect output sink type
  */
-static enum signal_type link_detect_sink(
-	struct dc_link *link,
-	enum dc_detect_reason reason)
+static enum signal_type link_detect_sink(struct dc_link *link,
+					 enum dc_detect_reason reason)
 {
-	enum signal_type result = get_basic_signal_type(
-		link->link_enc->id, link->link_id);
+	enum signal_type result = get_basic_signal_type(link->link_enc->id,
+							link->link_id);
 
 	/* Internal digital encoder will detect only dongles
-	 * that require digital signal */
+	 * that require digital signal
+	 */
 
 	/* Detection mechanism is different
 	 * for different native connectors.
 	 * LVDS connector supports only LVDS signal;
 	 * PCIE is a bus slot, the actual connector needs to be detected first;
 	 * eDP connector supports only eDP signal;
-	 * HDMI should check straps for audio */
+	 * HDMI should check straps for audio
+	 */
 
 	/* PCIE detects the actual connector on add-on board */
-
 	if (link->link_id.id == CONNECTOR_ID_PCIE) {
 		/* ZAZTODO implement PCIE add-on card detection */
 	}
@@ -432,8 +434,10 @@ static enum signal_type link_detect_sink(
 	switch (link->link_id.id) {
 	case CONNECTOR_ID_HDMI_TYPE_A: {
 		/* check audio support:
-		 * if native HDMI is not supported, switch to DVI */
-		struct audio_support *aud_support = &link->dc->res_pool->audio_support;
+		 * if native HDMI is not supported, switch to DVI
+		 */
+		struct audio_support *aud_support =
+					&link->dc->res_pool->audio_support;
 
 		if (!aud_support->hdmi_audio_native)
 			if (link->link_id.id == CONNECTOR_ID_HDMI_TYPE_A)
@@ -461,16 +465,15 @@ static enum signal_type link_detect_sink(
 	return result;
 }
 
-static enum signal_type decide_signal_from_strap_and_dongle_type(
-		enum display_dongle_type dongle_type,
-		struct audio_support *audio_support)
+static enum signal_type decide_signal_from_strap_and_dongle_type(enum display_dongle_type dongle_type,
+								 struct audio_support *audio_support)
 {
 	enum signal_type signal = SIGNAL_TYPE_NONE;
 
 	switch (dongle_type) {
 	case DISPLAY_DONGLE_DP_HDMI_DONGLE:
 		if (audio_support->hdmi_audio_on_dongle)
-			signal =  SIGNAL_TYPE_HDMI_TYPE_A;
+			signal = SIGNAL_TYPE_HDMI_TYPE_A;
 		else
 			signal = SIGNAL_TYPE_DVI_SINGLE_LINK;
 		break;
@@ -491,16 +494,14 @@ static enum signal_type decide_signal_from_strap_and_dongle_type(
 	return signal;
 }
 
-static enum signal_type dp_passive_dongle_detection(
-		struct ddc_service *ddc,
-		struct display_sink_capability *sink_cap,
-		struct audio_support *audio_support)
+static enum signal_type dp_passive_dongle_detection(struct ddc_service *ddc,
+						    struct display_sink_capability *sink_cap,
+						    struct audio_support *audio_support)
 {
-	dal_ddc_service_i2c_query_dp_dual_mode_adaptor(
-						ddc, sink_cap);
-	return decide_signal_from_strap_and_dongle_type(
-			sink_cap->dongle_type,
-			audio_support);
+	dal_ddc_service_i2c_query_dp_dual_mode_adaptor(ddc, sink_cap);
+
+	return decide_signal_from_strap_and_dongle_type(sink_cap->dongle_type,
+							audio_support);
 }
 
 static void link_disconnect_sink(struct dc_link *link)
@@ -519,6 +520,96 @@ static void link_disconnect_remap(struct dc_sink *prev_sink, struct dc_link *lin
 	link->local_sink = prev_sink;
 }
 
+#if defined(CONFIG_DRM_AMD_DC_HDCP)
+bool dc_link_is_hdcp14(struct dc_link *link)
+{
+	bool ret = false;
+
+	switch (link->connector_signal)	{
+	case SIGNAL_TYPE_DISPLAY_PORT:
+	case SIGNAL_TYPE_DISPLAY_PORT_MST:
+		ret = link->hdcp_caps.bcaps.bits.HDCP_CAPABLE;
+		break;
+	case SIGNAL_TYPE_DVI_SINGLE_LINK:
+	case SIGNAL_TYPE_DVI_DUAL_LINK:
+	case SIGNAL_TYPE_HDMI_TYPE_A:
+	/* HDMI doesn't tell us its HDCP(1.4) capability, so assume to always be capable,
+	 * we can poll for bksv but some displays have an issue with this. Since its so rare
+	 * for a display to not be 1.4 capable, this assumtion is ok
+	 */
+		ret = true;
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+bool dc_link_is_hdcp22(struct dc_link *link)
+{
+	bool ret = false;
+
+	switch (link->connector_signal)	{
+	case SIGNAL_TYPE_DISPLAY_PORT:
+	case SIGNAL_TYPE_DISPLAY_PORT_MST:
+		ret = (link->hdcp_caps.bcaps.bits.HDCP_CAPABLE &&
+				link->hdcp_caps.rx_caps.fields.byte0.hdcp_capable &&
+				(link->hdcp_caps.rx_caps.fields.version == 0x2)) ? 1 : 0;
+		break;
+	case SIGNAL_TYPE_DVI_SINGLE_LINK:
+	case SIGNAL_TYPE_DVI_DUAL_LINK:
+	case SIGNAL_TYPE_HDMI_TYPE_A:
+		ret = (link->hdcp_caps.rx_caps.fields.version == 0x4) ? 1:0;
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static void query_hdcp_capability(enum signal_type signal, struct dc_link *link)
+{
+	struct hdcp_protection_message msg22;
+	struct hdcp_protection_message msg14;
+
+	memset(&msg22, 0, sizeof(struct hdcp_protection_message));
+	memset(&msg14, 0, sizeof(struct hdcp_protection_message));
+	memset(link->hdcp_caps.rx_caps.raw, 0,
+		sizeof(link->hdcp_caps.rx_caps.raw));
+
+	if ((link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT &&
+			link->ddc->transaction_type ==
+			DDC_TRANSACTION_TYPE_I2C_OVER_AUX) ||
+			link->connector_signal == SIGNAL_TYPE_EDP) {
+		msg22.data = link->hdcp_caps.rx_caps.raw;
+		msg22.length = sizeof(link->hdcp_caps.rx_caps.raw);
+		msg22.msg_id = HDCP_MESSAGE_ID_RX_CAPS;
+	} else {
+		msg22.data = &link->hdcp_caps.rx_caps.fields.version;
+		msg22.length = sizeof(link->hdcp_caps.rx_caps.fields.version);
+		msg22.msg_id = HDCP_MESSAGE_ID_HDCP2VERSION;
+	}
+	msg22.version = HDCP_VERSION_22;
+	msg22.link = HDCP_LINK_PRIMARY;
+	msg22.max_retries = 5;
+	dc_process_hdcp_msg(signal, link, &msg22);
+
+	if (signal == SIGNAL_TYPE_DISPLAY_PORT || signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
+		enum hdcp_message_status status = HDCP_MESSAGE_UNSUPPORTED;
+
+		msg14.data = &link->hdcp_caps.bcaps.raw;
+		msg14.length = sizeof(link->hdcp_caps.bcaps.raw);
+		msg14.msg_id = HDCP_MESSAGE_ID_READ_BCAPS;
+		msg14.version = HDCP_VERSION_14;
+		msg14.link = HDCP_LINK_PRIMARY;
+		msg14.max_retries = 5;
+
+		status = dc_process_hdcp_msg(signal, link, &msg14);
+	}
+
+}
+#endif
 
 static void read_current_link_settings_on_detect(struct dc_link *link)
 {
@@ -532,18 +623,18 @@ static void read_current_link_settings_on_detect(struct dc_link *link)
 
 	// Read DPCD 00101h to find out the number of lanes currently set
 	for (i = 0; i < read_dpcd_retry_cnt; i++) {
-		status = core_link_read_dpcd(
-				link,
-				DP_LANE_COUNT_SET,
-				&lane_count_set.raw,
-				sizeof(lane_count_set));
+		status = core_link_read_dpcd(link,
+					     DP_LANE_COUNT_SET,
+					     &lane_count_set.raw,
+					     sizeof(lane_count_set));
 		/* First DPCD read after VDD ON can fail if the particular board
 		 * does not have HPD pin wired correctly. So if DPCD read fails,
 		 * which it should never happen, retry a few times. Target worst
 		 * case scenario of 80 ms.
 		 */
 		if (status == DC_OK) {
-			link->cur_link_settings.lane_count = lane_count_set.bits.LANE_COUNT_SET;
+			link->cur_link_settings.lane_count =
+					lane_count_set.bits.LANE_COUNT_SET;
 			break;
 		}
 
@@ -552,7 +643,7 @@ static void read_current_link_settings_on_detect(struct dc_link *link)
 
 	// Read DPCD 00100h to find if standard link rates are set
 	core_link_read_dpcd(link, DP_LINK_BW_SET,
-			&link_bw_set, sizeof(link_bw_set));
+			    &link_bw_set, sizeof(link_bw_set));
 
 	if (link_bw_set == 0) {
 		if (link->connector_signal == SIGNAL_TYPE_EDP) {
@@ -560,12 +651,12 @@ static void read_current_link_settings_on_detect(struct dc_link *link)
 			 * Read DPCD 00115h to find the edp link rate set used
 			 */
 			core_link_read_dpcd(link, DP_LINK_RATE_SET,
-					&link_rate_set, sizeof(link_rate_set));
+					    &link_rate_set, sizeof(link_rate_set));
 
 			// edp_supported_link_rates_count = 0 for DP
 			if (link_rate_set < link->dpcd_caps.edp_supported_link_rates_count) {
 				link->cur_link_settings.link_rate =
-						link->dpcd_caps.edp_supported_link_rates[link_rate_set];
+					link->dpcd_caps.edp_supported_link_rates[link_rate_set];
 				link->cur_link_settings.link_rate_set = link_rate_set;
 				link->cur_link_settings.use_link_rate_set = true;
 			}
@@ -579,7 +670,7 @@ static void read_current_link_settings_on_detect(struct dc_link *link)
 	}
 	// Read DPCD 00003h to find the max down spread.
 	core_link_read_dpcd(link, DP_MAX_DOWNSPREAD,
-			&max_down_spread.raw, sizeof(max_down_spread));
+			    &max_down_spread.raw, sizeof(max_down_spread));
 	link->cur_link_settings.link_spread =
 		max_down_spread.bits.MAX_DOWN_SPREAD ?
 		LINK_SPREAD_05_DOWNSPREAD_30KHZ : LINK_SPREAD_DISABLED;
@@ -612,6 +703,12 @@ static bool detect_dp(struct dc_link *link,
 			dal_ddc_service_set_transaction_type(link->ddc,
 							     sink_caps->transaction_type);
 
+#if defined(CONFIG_DRM_AMD_DC_HDCP)
+			/* In case of fallback to SST when topology discovery below fails
+			 * HDCP caps will be querried again later by the upper layer (caller
+			 * of this function). */
+			query_hdcp_capability(SIGNAL_TYPE_DISPLAY_PORT_MST, link);
+#endif
 			/*
 			 * This call will initiate MST topology discovery. Which
 			 * will detect MST ports and add new DRM connector DRM
@@ -683,12 +780,12 @@ static bool is_same_edid(struct dc_edid *old_edid, struct dc_edid *new_edid)
 	if (new_edid->length == 0)
 		return false;
 
-	return (memcmp(old_edid->raw_edid, new_edid->raw_edid, new_edid->length) == 0);
+	return (memcmp(old_edid->raw_edid,
+		       new_edid->raw_edid, new_edid->length) == 0);
 }
 
-static bool wait_for_alt_mode(struct dc_link *link)
+static bool wait_for_entering_dp_alt_mode(struct dc_link *link)
 {
-
 	/**
 	 * something is terribly wrong if time out is > 200ms. (5Hz)
 	 * 500 microseconds * 400 tries us 200 ms
@@ -703,7 +800,7 @@ static bool wait_for_alt_mode(struct dc_link *link)
 
 	DC_LOGGER_INIT(link->ctx->logger);
 
-	if (link->link_enc->funcs->is_in_alt_mode == NULL)
+	if (!link->link_enc->funcs->is_in_alt_mode)
 		return true;
 
 	is_in_alt_mode = link->link_enc->funcs->is_in_alt_mode(link->link_enc);
@@ -718,21 +815,21 @@ static bool wait_for_alt_mode(struct dc_link *link)
 		udelay(sleep_time_in_microseconds);
 		/* ask the link if alt mode is enabled, if so return ok */
 		if (link->link_enc->funcs->is_in_alt_mode(link->link_enc)) {
-
 			finish_timestamp = dm_get_timestamp(link->ctx);
-			time_taken_in_ns = dm_get_elapse_time_in_ns(
-				link->ctx, finish_timestamp, enter_timestamp);
+			time_taken_in_ns =
+				dm_get_elapse_time_in_ns(link->ctx,
+							 finish_timestamp,
+							 enter_timestamp);
 			DC_LOG_WARNING("Alt mode entered finished after %llu ms\n",
 				       div_u64(time_taken_in_ns, 1000000));
 			return true;
 		}
-
 	}
 	finish_timestamp = dm_get_timestamp(link->ctx);
 	time_taken_in_ns = dm_get_elapse_time_in_ns(link->ctx, finish_timestamp,
 						    enter_timestamp);
 	DC_LOG_WARNING("Alt mode has timed out after %llu ms\n",
-			div_u64(time_taken_in_ns, 1000000));
+		       div_u64(time_taken_in_ns, 1000000));
 	return false;
 }
 
@@ -768,30 +865,30 @@ static bool dc_link_detect_helper(struct dc_link *link,
 		return false;
 
 	if ((link->connector_signal == SIGNAL_TYPE_LVDS ||
-			link->connector_signal == SIGNAL_TYPE_EDP) &&
-			link->local_sink) {
-
+	     link->connector_signal == SIGNAL_TYPE_EDP) &&
+	    link->local_sink) {
 		// need to re-write OUI and brightness in resume case
 		if (link->connector_signal == SIGNAL_TYPE_EDP) {
 			dpcd_set_source_specific_data(link);
-			dc_link_set_default_brightness_aux(link); //TODO: use cached
+			dc_link_set_default_brightness_aux(link);
+			//TODO: use cached
 		}
 
 		return true;
 	}
 
-	if (false == dc_link_detect_sink(link, &new_connection_type)) {
+	if (!dc_link_detect_sink(link, &new_connection_type)) {
 		BREAK_TO_DEBUGGER();
 		return false;
 	}
 
 	prev_sink = link->local_sink;
-	if (prev_sink != NULL) {
+	if (prev_sink) {
 		dc_sink_retain(prev_sink);
 		memcpy(&prev_dpcd_caps, &link->dpcd_caps, sizeof(struct dpcd_caps));
 	}
-	link_disconnect_sink(link);
 
+	link_disconnect_sink(link);
 	if (new_connection_type != dc_connection_none) {
 		link->type = new_connection_type;
 		link->link_state_valid = false;
@@ -838,35 +935,31 @@ static bool dc_link_detect_helper(struct dc_link *link,
 		}
 
 		case SIGNAL_TYPE_DISPLAY_PORT: {
-
 			/* wa HPD high coming too early*/
 			if (link->link_enc->features.flags.bits.DP_IS_USB_C == 1) {
-
 				/* if alt mode times out, return false */
-				if (wait_for_alt_mode(link) == false) {
+				if (!wait_for_entering_dp_alt_mode(link))
 					return false;
-				}
 			}
 
-			if (!detect_dp(
-				link,
-				&sink_caps,
-				&converter_disable_audio,
-				aud_support, reason)) {
-				if (prev_sink != NULL)
+			if (!detect_dp(link, &sink_caps,
+				       &converter_disable_audio,
+				       aud_support, reason)) {
+				if (prev_sink)
 					dc_sink_release(prev_sink);
 				return false;
 			}
 
 			// Check if dpcp block is the same
-			if (prev_sink != NULL) {
-				if (memcmp(&link->dpcd_caps, &prev_dpcd_caps, sizeof(struct dpcd_caps)))
+			if (prev_sink) {
+				if (memcmp(&link->dpcd_caps, &prev_dpcd_caps,
+					   sizeof(struct dpcd_caps)))
 					same_dpcd = false;
 			}
 			/* Active dongle downstream unplug*/
 			if (link->type == dc_connection_active_dongle &&
-				link->dpcd_caps.sink_count.bits.SINK_COUNT == 0) {
-				if (prev_sink != NULL)
+			    link->dpcd_caps.sink_count.bits.SINK_COUNT == 0) {
+				if (prev_sink)
 					/* Downstream unplug */
 					dc_sink_release(prev_sink);
 				return true;
@@ -874,7 +967,7 @@ static bool dc_link_detect_helper(struct dc_link *link,
 
 			if (link->type == dc_connection_mst_branch) {
 				LINK_INFO("link=%d, mst branch is now Connected\n",
-					link->link_index);
+					  link->link_index);
 				/* Need to setup mst link_cap struct here
 				 * otherwise dc_link_detect() will leave mst link_cap
 				 * empty which leads to allocate_mst_payload() has "0"
@@ -882,15 +975,15 @@ static bool dc_link_detect_helper(struct dc_link *link,
 				 */
 				dp_verify_mst_link_cap(link);
 
-				if (prev_sink != NULL)
+				if (prev_sink)
 					dc_sink_release(prev_sink);
 				return false;
 			}
 
 			// For seamless boot, to skip verify link cap, we read UEFI settings and set them as verified.
 			if (reason == DETECT_REASON_BOOT &&
-					dc_ctx->dc->config.power_down_display_on_boot == false &&
-					link->link_status.link_active == true)
+			    !dc_ctx->dc->config.power_down_display_on_boot &&
+			    link->link_status.link_active)
 				perform_dp_seamless_boot = true;
 
 			if (perform_dp_seamless_boot) {
@@ -903,24 +996,23 @@ static bool dc_link_detect_helper(struct dc_link *link,
 
 		default:
 			DC_ERROR("Invalid connector type! signal:%d\n",
-				link->connector_signal);
-			if (prev_sink != NULL)
+				 link->connector_signal);
+			if (prev_sink)
 				dc_sink_release(prev_sink);
 			return false;
 		} /* switch() */
 
 		if (link->dpcd_caps.sink_count.bits.SINK_COUNT)
-			link->dpcd_sink_count = link->dpcd_caps.sink_count.
-					bits.SINK_COUNT;
+			link->dpcd_sink_count =
+				link->dpcd_caps.sink_count.bits.SINK_COUNT;
 		else
 			link->dpcd_sink_count = 1;
 
-		dal_ddc_service_set_transaction_type(
-						link->ddc,
-						sink_caps.transaction_type);
+		dal_ddc_service_set_transaction_type(link->ddc,
+						     sink_caps.transaction_type);
 
-		link->aux_mode = dal_ddc_service_is_in_aux_transaction_mode(
-				link->ddc);
+		link->aux_mode =
+			dal_ddc_service_is_in_aux_transaction_mode(link->ddc);
 
 		sink_init_data.link = link;
 		sink_init_data.sink_signal = sink_caps.signal;
@@ -928,7 +1020,7 @@ static bool dc_link_detect_helper(struct dc_link *link,
 		sink = dc_sink_create(&sink_init_data);
 		if (!sink) {
 			DC_ERROR("Failed to create sink!\n");
-			if (prev_sink != NULL)
+			if (prev_sink)
 				dc_sink_release(prev_sink);
 			return false;
 		}
@@ -939,10 +1031,8 @@ static bool dc_link_detect_helper(struct dc_link *link,
 		/* dc_sink_create returns a new reference */
 		link->local_sink = sink;
 
-		edid_status = dm_helpers_read_local_edid(
-				link->ctx,
-				link,
-				sink);
+		edid_status = dm_helpers_read_local_edid(link->ctx,
+							 link, sink);
 
 		switch (edid_status) {
 		case EDID_BAD_CHECKSUM:
@@ -950,7 +1040,6 @@ static bool dc_link_detect_helper(struct dc_link *link,
 			break;
 		case EDID_NO_RESPONSE:
 			DC_LOG_ERROR("No EDID read.\n");
-
 			/*
 			 * Abort detection for non-DP connectors if we have
 			 * no EDID
@@ -961,7 +1050,7 @@ static bool dc_link_detect_helper(struct dc_link *link,
 			 */
 			if (dc_is_hdmi_signal(link->connector_signal) ||
 			    dc_is_dvi_signal(link->connector_signal)) {
-				if (prev_sink != NULL)
+				if (prev_sink)
 					dc_sink_release(prev_sink);
 
 				return false;
@@ -974,45 +1063,53 @@ static bool dc_link_detect_helper(struct dc_link *link,
 			link->ctx->dc->debug.disable_fec = true;
 
 		// Check if edid is the same
-		if ((prev_sink != NULL) && ((edid_status == EDID_THE_SAME) || (edid_status == EDID_OK)))
-			same_edid = is_same_edid(&prev_sink->dc_edid, &sink->dc_edid);
+		if ((prev_sink) &&
+		    (edid_status == EDID_THE_SAME || edid_status == EDID_OK))
+			same_edid = is_same_edid(&prev_sink->dc_edid,
+						 &sink->dc_edid);
 
 		if (sink->edid_caps.panel_patch.skip_scdc_overwrite)
 			link->ctx->dc->debug.hdmi20_disable = true;
 
 		if (link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT &&
-			sink_caps.transaction_type == DDC_TRANSACTION_TYPE_I2C_OVER_AUX) {
+		    sink_caps.transaction_type ==
+		    DDC_TRANSACTION_TYPE_I2C_OVER_AUX) {
 			/*
 			 * TODO debug why Dell 2413 doesn't like
 			 *  two link trainings
 			 */
+#if defined(CONFIG_DRM_AMD_DC_HDCP)
+			query_hdcp_capability(sink->sink_signal, link);
+#endif
 
 			// verify link cap for SST non-seamless boot
 			if (!perform_dp_seamless_boot)
 				dp_verify_link_cap_with_retries(link,
-						&link->reported_link_cap,
-						LINK_TRAINING_MAX_VERIFY_RETRY);
+								&link->reported_link_cap,
+								LINK_TRAINING_MAX_VERIFY_RETRY);
 		} else {
 			// If edid is the same, then discard new sink and revert back to original sink
 			if (same_edid) {
 				link_disconnect_remap(prev_sink, link);
 				sink = prev_sink;
 				prev_sink = NULL;
-
 			}
+#if defined(CONFIG_DRM_AMD_DC_HDCP)
+			query_hdcp_capability(sink->sink_signal, link);
+#endif
 		}
 
 		/* HDMI-DVI Dongle */
 		if (sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A &&
-				!sink->edid_caps.edid_hdmi)
+		    !sink->edid_caps.edid_hdmi)
 			sink->sink_signal = SIGNAL_TYPE_DVI_SINGLE_LINK;
 
 		/* Connectivity log: detection */
 		for (i = 0; i < sink->dc_edid.length / DC_EDID_BLOCK_SIZE; i++) {
 			CONN_DATA_DETECT(link,
-					&sink->dc_edid.raw_edid[i * DC_EDID_BLOCK_SIZE],
-					DC_EDID_BLOCK_SIZE,
-					"%s: [Block %d] ", sink->edid_caps.display_name, i);
+					 &sink->dc_edid.raw_edid[i * DC_EDID_BLOCK_SIZE],
+					 DC_EDID_BLOCK_SIZE,
+					 "%s: [Block %d] ", sink->edid_caps.display_name, i);
 		}
 
 		DC_LOG_DETECTION_EDID_PARSER("%s: "
@@ -1047,17 +1144,18 @@ static bool dc_link_detect_helper(struct dc_link *link,
 				sink->edid_caps.audio_modes[i].sample_rate,
 				sink->edid_caps.audio_modes[i].sample_size);
 		}
-
 	} else {
 		/* From Connected-to-Disconnected. */
 		if (link->type == dc_connection_mst_branch) {
 			LINK_INFO("link=%d, mst branch is now Disconnected\n",
-				link->link_index);
+				  link->link_index);
 
 			dm_helpers_dp_mst_stop_top_mgr(link->ctx, link);
 
 			link->mst_stream_alloc_table.stream_count = 0;
-			memset(link->mst_stream_alloc_table.stream_allocations, 0, sizeof(link->mst_stream_alloc_table.stream_allocations));
+			memset(link->mst_stream_alloc_table.stream_allocations,
+			       0,
+			       sizeof(link->mst_stream_alloc_table.stream_allocations));
 		}
 
 		link->type = dc_connection_none;
@@ -1071,16 +1169,15 @@ static bool dc_link_detect_helper(struct dc_link *link,
 	}
 
 	LINK_INFO("link=%d, dc_sink_in=%p is now %s prev_sink=%p dpcd same=%d edid same=%d\n",
-		link->link_index, sink,
-		(sink_caps.signal == SIGNAL_TYPE_NONE ?
-			"Disconnected":"Connected"), prev_sink,
-			same_dpcd, same_edid);
+		  link->link_index, sink,
+		  (sink_caps.signal ==
+		   SIGNAL_TYPE_NONE ? "Disconnected" : "Connected"),
+		  prev_sink, same_dpcd, same_edid);
 
-	if (prev_sink != NULL)
+	if (prev_sink)
 		dc_sink_release(prev_sink);
 
 	return true;
-
 }
 
 bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason)
@@ -1110,13 +1207,13 @@ bool dc_link_get_hpd_state(struct dc_link *dc_link)
 	return state;
 }
 
-static enum hpd_source_id get_hpd_line(
-		struct dc_link *link)
+static enum hpd_source_id get_hpd_line(struct dc_link *link)
 {
 	struct gpio *hpd;
 	enum hpd_source_id hpd_id = HPD_SOURCEID_UNKNOWN;
 
-	hpd = get_hpd_gpio(link->ctx->dc_bios, link->link_id, link->ctx->gpio_service);
+	hpd = get_hpd_gpio(link->ctx->dc_bios, link->link_id,
+			   link->ctx->gpio_service);
 
 	if (hpd) {
 		switch (dal_irq_get_source(hpd)) {
@@ -1191,8 +1288,7 @@ static enum channel_id get_ddc_line(struct dc_link *link)
 	return channel;
 }
 
-static enum transmitter translate_encoder_to_transmitter(
-	struct graphics_object_id encoder)
+static enum transmitter translate_encoder_to_transmitter(struct graphics_object_id encoder)
 {
 	switch (encoder.id) {
 	case ENCODER_ID_INTERNAL_UNIPHY:
@@ -1256,17 +1352,18 @@ static enum transmitter translate_encoder_to_transmitter(
 	}
 }
 
-static bool dc_link_construct(
-	struct dc_link *link,
-	const struct link_init_data *init_params)
+static bool dc_link_construct(struct dc_link *link,
+			      const struct link_init_data *init_params)
 {
 	uint8_t i;
 	struct ddc_service_init_data ddc_service_init_data = { { 0 } };
 	struct dc_context *dc_ctx = init_params->ctx;
 	struct encoder_init_data enc_init_data = { 0 };
+	struct panel_cntl_init_data panel_cntl_init_data = { 0 };
 	struct integrated_info info = {{{ 0 }}};
 	struct dc_bios *bios = init_params->dc->ctx->dc_bios;
 	const struct dc_vbios_funcs *bp_funcs = bios->funcs;
+
 	DC_LOGGER_INIT(dc_ctx->logger);
 
 	link->irq_source_hpd = DC_IRQ_SOURCE_INVALID;
@@ -1278,23 +1375,27 @@ static bool dc_link_construct(
 	link->ctx = dc_ctx;
 	link->link_index = init_params->link_index;
 
-	memset(&link->preferred_training_settings, 0, sizeof(struct dc_link_training_overrides));
-	memset(&link->preferred_link_setting, 0, sizeof(struct dc_link_settings));
+	memset(&link->preferred_training_settings, 0,
+	       sizeof(struct dc_link_training_overrides));
+	memset(&link->preferred_link_setting, 0,
+	       sizeof(struct dc_link_settings));
 
-	link->link_id = bios->funcs->get_connector_id(bios, init_params->connector_index);
+	link->link_id =
+		bios->funcs->get_connector_id(bios, init_params->connector_index);
 
 	if (link->link_id.type != OBJECT_TYPE_CONNECTOR) {
 		dm_output_to_console("%s: Invalid Connector ObjectID from Adapter Service for connector index:%d! type %d expected %d\n",
-			 __func__, init_params->connector_index,
-			 link->link_id.type, OBJECT_TYPE_CONNECTOR);
+				     __func__, init_params->connector_index,
+				     link->link_id.type, OBJECT_TYPE_CONNECTOR);
 		goto create_fail;
 	}
 
 	if (link->dc->res_pool->funcs->link_init)
 		link->dc->res_pool->funcs->link_init(link);
 
-	link->hpd_gpio = get_hpd_gpio(link->ctx->dc_bios, link->link_id, link->ctx->gpio_service);
-	if (link->hpd_gpio != NULL) {
+	link->hpd_gpio = get_hpd_gpio(link->ctx->dc_bios, link->link_id,
+				      link->ctx->gpio_service);
+	if (link->hpd_gpio) {
 		dal_gpio_open(link->hpd_gpio, GPIO_MODE_INTERRUPT);
 		dal_gpio_unlock_pin(link->hpd_gpio);
 		link->irq_source_hpd = dal_irq_get_source(link->hpd_gpio);
@@ -1314,9 +1415,9 @@ static bool dc_link_construct(
 		link->connector_signal = SIGNAL_TYPE_DVI_DUAL_LINK;
 		break;
 	case CONNECTOR_ID_DISPLAY_PORT:
-		link->connector_signal =	SIGNAL_TYPE_DISPLAY_PORT;
+		link->connector_signal = SIGNAL_TYPE_DISPLAY_PORT;
 
-		if (link->hpd_gpio != NULL)
+		if (link->hpd_gpio)
 			link->irq_source_hpd_rx =
 					dal_irq_get_rx_source(link->hpd_gpio);
 
@@ -1324,42 +1425,60 @@ static bool dc_link_construct(
 	case CONNECTOR_ID_EDP:
 		link->connector_signal = SIGNAL_TYPE_EDP;
 
-		if (link->hpd_gpio != NULL) {
+		if (link->hpd_gpio) {
 			link->irq_source_hpd = DC_IRQ_SOURCE_INVALID;
 			link->irq_source_hpd_rx =
 					dal_irq_get_rx_source(link->hpd_gpio);
 		}
+
 		break;
 	case CONNECTOR_ID_LVDS:
 		link->connector_signal = SIGNAL_TYPE_LVDS;
 		break;
 	default:
-		DC_LOG_WARNING("Unsupported Connector type:%d!\n", link->link_id.id);
+		DC_LOG_WARNING("Unsupported Connector type:%d!\n",
+			       link->link_id.id);
 		goto create_fail;
 	}
 
 	/* TODO: #DAL3 Implement id to str function.*/
 	LINK_INFO("Connector[%d] description:"
-			"signal %d\n",
-			init_params->connector_index,
-			link->connector_signal);
+		  "signal %d\n",
+		  init_params->connector_index,
+		  link->connector_signal);
 
 	ddc_service_init_data.ctx = link->ctx;
 	ddc_service_init_data.id = link->link_id;
 	ddc_service_init_data.link = link;
 	link->ddc = dal_ddc_service_create(&ddc_service_init_data);
 
-	if (link->ddc == NULL) {
+	if (!link->ddc) {
 		DC_ERROR("Failed to create ddc_service!\n");
 		goto ddc_create_fail;
 	}
 
 	link->ddc_hw_inst =
-		dal_ddc_get_line(
-			dal_ddc_service_get_ddc_pin(link->ddc));
+		dal_ddc_get_line(dal_ddc_service_get_ddc_pin(link->ddc));
+
+
+	if (link->dc->res_pool->funcs->panel_cntl_create &&
+		(link->link_id.id == CONNECTOR_ID_EDP ||
+			link->link_id.id == CONNECTOR_ID_LVDS)) {
+		panel_cntl_init_data.ctx = dc_ctx;
+		panel_cntl_init_data.inst = 0;
+		link->panel_cntl =
+			link->dc->res_pool->funcs->panel_cntl_create(
+								&panel_cntl_init_data);
+
+		if (link->panel_cntl == NULL) {
+			DC_ERROR("Failed to create link panel_cntl!\n");
+			goto panel_cntl_create_fail;
+		}
+	}
 
 	enc_init_data.ctx = dc_ctx;
-	bp_funcs->get_src_obj(dc_ctx->dc_bios, link->link_id, 0, &enc_init_data.encoder);
+	bp_funcs->get_src_obj(dc_ctx->dc_bios, link->link_id, 0,
+			      &enc_init_data.encoder);
 	enc_init_data.connector = link->link_id;
 	enc_init_data.channel = get_ddc_line(link);
 	enc_init_data.hpd_source = get_hpd_line(link);
@@ -1367,11 +1486,11 @@ static bool dc_link_construct(
 	link->hpd_src = enc_init_data.hpd_source;
 
 	enc_init_data.transmitter =
-			translate_encoder_to_transmitter(enc_init_data.encoder);
-	link->link_enc = link->dc->res_pool->funcs->link_enc_create(
-								&enc_init_data);
+		translate_encoder_to_transmitter(enc_init_data.encoder);
+	link->link_enc =
+		link->dc->res_pool->funcs->link_enc_create(&enc_init_data);
 
-	if (link->link_enc == NULL) {
+	if (!link->link_enc) {
 		DC_ERROR("Failed to create link encoder!\n");
 		goto link_enc_create_fail;
 	}
@@ -1379,8 +1498,9 @@ static bool dc_link_construct(
 	link->link_enc_hw_inst = link->link_enc->transmitter;
 
 	for (i = 0; i < 4; i++) {
-		if (BP_RESULT_OK !=
-				bp_funcs->get_device_tag(dc_ctx->dc_bios, link->link_id, i, &link->device_tag)) {
+		if (bp_funcs->get_device_tag(dc_ctx->dc_bios,
+					     link->link_id, i,
+					     &link->device_tag) != BP_RESULT_OK) {
 			DC_ERROR("Failed to find device tag!\n");
 			goto device_tag_fail;
 		}
@@ -1388,13 +1508,14 @@ static bool dc_link_construct(
 		/* Look for device tag that matches connector signal,
 		 * CRT for rgb, LCD for other supported signal tyes
 		 */
-		if (!bp_funcs->is_device_id_supported(dc_ctx->dc_bios, link->device_tag.dev_id))
+		if (!bp_funcs->is_device_id_supported(dc_ctx->dc_bios,
+						      link->device_tag.dev_id))
 			continue;
-		if (link->device_tag.dev_id.device_type == DEVICE_TYPE_CRT
-			&& link->connector_signal != SIGNAL_TYPE_RGB)
+		if (link->device_tag.dev_id.device_type == DEVICE_TYPE_CRT &&
+		    link->connector_signal != SIGNAL_TYPE_RGB)
 			continue;
-		if (link->device_tag.dev_id.device_type == DEVICE_TYPE_LCD
-			&& link->connector_signal == SIGNAL_TYPE_RGB)
+		if (link->device_tag.dev_id.device_type == DEVICE_TYPE_LCD &&
+		    link->connector_signal == SIGNAL_TYPE_RGB)
 			continue;
 		break;
 	}
@@ -1406,16 +1527,16 @@ static bool dc_link_construct(
 	for (i = 0; i < MAX_NUMBER_OF_EXT_DISPLAY_PATH; i++) {
 		struct external_display_path *path =
 			&info.ext_disp_conn_info.path[i];
-		if (path->device_connector_id.enum_id == link->link_id.enum_id
-			&& path->device_connector_id.id == link->link_id.id
-			&& path->device_connector_id.type == link->link_id.type) {
 
-			if (link->device_tag.acpi_device != 0
-				&& path->device_acpi_enum == link->device_tag.acpi_device) {
+		if (path->device_connector_id.enum_id == link->link_id.enum_id &&
+		    path->device_connector_id.id == link->link_id.id &&
+		    path->device_connector_id.type == link->link_id.type) {
+			if (link->device_tag.acpi_device != 0 &&
+			    path->device_acpi_enum == link->device_tag.acpi_device) {
 				link->ddi_channel_mapping = path->channel_mapping;
 				link->chip_caps = path->caps;
 			} else if (path->device_tag ==
-					link->device_tag.dev_id.raw_device_tag) {
+				   link->device_tag.dev_id.raw_device_tag) {
 				link->ddi_channel_mapping = path->channel_mapping;
 				link->chip_caps = path->caps;
 			}
@@ -1431,15 +1552,20 @@ static bool dc_link_construct(
 	 */
 	program_hpd_filter(link);
 
+	link->psr_settings.psr_version = PSR_VERSION_UNSUPPORTED;
+
 	return true;
 device_tag_fail:
 	link->link_enc->funcs->destroy(&link->link_enc);
 link_enc_create_fail:
+	if (link->panel_cntl != NULL)
+		link->panel_cntl->funcs->destroy(&link->panel_cntl);
+panel_cntl_create_fail:
 	dal_ddc_service_destroy(&link->ddc);
 ddc_create_fail:
 create_fail:
 
-	if (link->hpd_gpio != NULL) {
+	if (link->hpd_gpio) {
 		dal_gpio_destroy_irq(&link->hpd_gpio);
 		link->hpd_gpio = NULL;
 	}
@@ -2339,9 +2465,28 @@ enum dc_status dc_link_validate_mode_timing(
 	return DC_OK;
 }
 
+static struct abm *get_abm_from_stream_res(const struct dc_link *link)
+{
+	int i;
+	struct dc *dc = link->ctx->dc;
+	struct abm *abm = NULL;
+
+	for (i = 0; i < MAX_PIPES; i++) {
+		struct pipe_ctx pipe_ctx = dc->current_state->res_ctx.pipe_ctx[i];
+		struct dc_stream_state *stream = pipe_ctx.stream;
+
+		if (stream && stream->link == link) {
+			abm = pipe_ctx.stream_res.abm;
+			break;
+		}
+	}
+	return abm;
+}
+
 int dc_link_get_backlight_level(const struct dc_link *link)
 {
-	struct abm *abm = link->ctx->dc->res_pool->abm;
+
+	struct abm *abm = get_abm_from_stream_res(link);
 
 	if (abm == NULL || abm->funcs->get_current_backlight == NULL)
 		return DC_ERROR_UNEXPECTED;
@@ -2349,41 +2494,36 @@ int dc_link_get_backlight_level(const struct dc_link *link)
 	return (int) abm->funcs->get_current_backlight(abm);
 }
 
+int dc_link_get_target_backlight_pwm(const struct dc_link *link)
+{
+	struct abm *abm = get_abm_from_stream_res(link);
+
+	if (abm == NULL || abm->funcs->get_target_backlight == NULL)
+		return DC_ERROR_UNEXPECTED;
+
+	return (int) abm->funcs->get_target_backlight(abm);
+}
+
 bool dc_link_set_backlight_level(const struct dc_link *link,
 		uint32_t backlight_pwm_u16_16,
 		uint32_t frame_ramp)
 {
 	struct dc  *dc = link->ctx->dc;
-	struct abm *abm = dc->res_pool->abm;
-	struct dmcu *dmcu = dc->res_pool->dmcu;
-	unsigned int controller_id = 0;
-	bool use_smooth_brightness = true;
 	int i;
-	DC_LOGGER_INIT(link->ctx->logger);
-
-	if ((dmcu == NULL) ||
-		(abm == NULL) ||
-		(abm->funcs->set_backlight_level_pwm == NULL))
-		return false;
-
-	use_smooth_brightness = dmcu->funcs->is_dmcu_initialized(dmcu);
 
+	DC_LOGGER_INIT(link->ctx->logger);
 	DC_LOG_BACKLIGHT("New Backlight level: %d (0x%X)\n",
 			backlight_pwm_u16_16, backlight_pwm_u16_16);
 
 	if (dc_is_embedded_signal(link->connector_signal)) {
+		struct pipe_ctx *pipe_ctx = NULL;
+
 		for (i = 0; i < MAX_PIPES; i++) {
 			if (dc->current_state->res_ctx.pipe_ctx[i].stream) {
 				if (dc->current_state->res_ctx.
 						pipe_ctx[i].stream->link
 						== link) {
-					/* DMCU -1 for all controller id values,
-					 * therefore +1 here
-					 */
-					controller_id =
-						dc->current_state->
-						res_ctx.pipe_ctx[i].stream_res.tg->inst +
-						1;
+					pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i];
 
 					/* Disable brightness ramping when the display is blanked
 					 * as it can hang the DMCU
@@ -2393,12 +2533,14 @@ bool dc_link_set_backlight_level(const struct dc_link *link,
 				}
 			}
 		}
-		abm->funcs->set_backlight_level_pwm(
-				abm,
+
+		if (pipe_ctx == NULL)
+			ASSERT(false);
+
+		dc->hwss.set_backlight_level(
+				pipe_ctx,
 				backlight_pwm_u16_16,
-				frame_ramp,
-				controller_id,
-				use_smooth_brightness);
+				frame_ramp);
 	}
 
 	return true;
@@ -2406,15 +2548,13 @@ bool dc_link_set_backlight_level(const struct dc_link *link,
 
 bool dc_link_set_abm_disable(const struct dc_link *link)
 {
-	struct dc  *dc = link->ctx->dc;
-	struct abm *abm = dc->res_pool->abm;
-
-	if ((abm == NULL) || (abm->funcs->set_backlight_level_pwm == NULL))
-		return false;
+	struct abm *abm = get_abm_from_stream_res(link);
+	bool success = false;
 
-	abm->funcs->set_abm_immediate_disable(abm);
+	if (abm)
+		success = abm->funcs->set_abm_immediate_disable(abm, link->panel_cntl->inst);
 
-	return true;
+	return success;
 }
 
 bool dc_link_set_psr_allow_active(struct dc_link *link, bool allow_active, bool wait)
@@ -2423,12 +2563,12 @@ bool dc_link_set_psr_allow_active(struct dc_link *link, bool allow_active, bool
 	struct dmcu *dmcu = dc->res_pool->dmcu;
 	struct dmub_psr *psr = dc->res_pool->psr;
 
-	if (psr != NULL && link->psr_feature_enabled)
+	if (psr != NULL && link->psr_settings.psr_feature_enabled)
 		psr->funcs->psr_enable(psr, allow_active);
-	else if ((dmcu != NULL && dmcu->funcs->is_dmcu_initialized(dmcu)) && link->psr_feature_enabled)
+	else if ((dmcu != NULL && dmcu->funcs->is_dmcu_initialized(dmcu)) && link->psr_settings.psr_feature_enabled)
 		dmcu->funcs->set_psr_enable(dmcu, allow_active, wait);
 
-	link->psr_allow_active = allow_active;
+	link->psr_settings.psr_allow_active = allow_active;
 
 	return true;
 }
@@ -2439,9 +2579,9 @@ bool dc_link_get_psr_state(const struct dc_link *link, uint32_t *psr_state)
 	struct dmcu *dmcu = dc->res_pool->dmcu;
 	struct dmub_psr *psr = dc->res_pool->psr;
 
-	if (psr != NULL && link->psr_feature_enabled)
+	if (psr != NULL && link->psr_settings.psr_feature_enabled)
 		psr->funcs->psr_get_state(psr, psr_state);
-	else if (dmcu != NULL && link->psr_feature_enabled)
+	else if (dmcu != NULL && link->psr_settings.psr_feature_enabled)
 		dmcu->funcs->get_psr_state(dmcu, psr_state);
 
 	return true;
@@ -2612,14 +2752,14 @@ bool dc_link_setup_psr(struct dc_link *link,
 	psr_context->frame_delay = 0;
 
 	if (psr)
-		link->psr_feature_enabled = psr->funcs->psr_copy_settings(psr, link, psr_context);
+		link->psr_settings.psr_feature_enabled = psr->funcs->psr_copy_settings(psr, link, psr_context);
 	else
-		link->psr_feature_enabled = dmcu->funcs->setup_psr(dmcu, link, psr_context);
+		link->psr_settings.psr_feature_enabled = dmcu->funcs->setup_psr(dmcu, link, psr_context);
 
 	/* psr_enabled == 0 indicates setup_psr did not succeed, but this
 	 * should not happen since firmware should be running at this point
 	 */
-	if (link->psr_feature_enabled == 0)
+	if (link->psr_settings.psr_feature_enabled == 0)
 		ASSERT(0);
 
 	return true;
@@ -2966,7 +3106,7 @@ void core_link_enable_stream(
 	enum dc_status status;
 	DC_LOGGER_INIT(pipe_ctx->stream->ctx->logger);
 
-	if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment) &&
+	if (!IS_DIAG_DC(dc->ctx->dce_environment) &&
 			dc_is_virtual_signal(pipe_ctx->stream->signal))
 		return;
 
@@ -3040,6 +3180,18 @@ void core_link_enable_stream(
 		if (pipe_ctx->stream->dpms_off)
 			return;
 
+		/* Have to setup DSC before DIG FE and BE are connected (which happens before the
+		 * link training). This is to make sure the bandwidth sent to DIG BE won't be
+		 * bigger than what the link and/or DIG BE can handle. VBID[6]/CompressedStream_flag
+		 * will be automatically set at a later time when the video is enabled
+		 * (DP_VID_STREAM_EN = 1).
+		 */
+		if (pipe_ctx->stream->timing.flags.DSC) {
+			if (dc_is_dp_signal(pipe_ctx->stream->signal) ||
+					dc_is_virtual_signal(pipe_ctx->stream->signal))
+				dp_set_dsc_enable(pipe_ctx, true);
+		}
+
 		status = enable_link(state, pipe_ctx);
 
 		if (status != DC_OK) {
@@ -3067,11 +3219,6 @@ void core_link_enable_stream(
 					CONTROLLER_DP_TEST_PATTERN_VIDEOMODE,
 					COLOR_DEPTH_UNDEFINED);
 
-		if (pipe_ctx->stream->timing.flags.DSC) {
-			if (dc_is_dp_signal(pipe_ctx->stream->signal) ||
-					dc_is_virtual_signal(pipe_ctx->stream->signal))
-				dp_set_dsc_enable(pipe_ctx, true);
-		}
 		dc->hwss.enable_stream(pipe_ctx);
 
 		/* Set DPS PPS SDP (AKA "info frames") */
@@ -3109,7 +3256,7 @@ void core_link_disable_stream(struct pipe_ctx *pipe_ctx)
 	struct dc_stream_state *stream = pipe_ctx->stream;
 	struct dc_link *link = stream->sink->link;
 
-	if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment) &&
+	if (!IS_DIAG_DC(dc->ctx->dce_environment) &&
 			dc_is_virtual_signal(pipe_ctx->stream->signal))
 		return;
 
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
index 256889eed93e..aefd29a440b5 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
@@ -599,7 +599,7 @@ bool dal_ddc_submit_aux_command(struct ddc_service *ddc,
 	do {
 		struct aux_payload current_payload;
 		bool is_end_of_payload = (retrieved + DEFAULT_AUX_MAX_DATA_SIZE) >
-			payload->length ? true : false;
+			payload->length;
 
 		current_payload.address = payload->address;
 		current_payload.data = &payload->data[retrieved];
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 7cbb1efb4f68..9ef9e50a34fa 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1710,19 +1710,10 @@ bool dc_link_dp_sync_lt_end(struct dc_link *link, bool link_down)
 
 static struct dc_link_settings get_max_link_cap(struct dc_link *link)
 {
-	/* Set Default link settings */
-	struct dc_link_settings max_link_cap = {LANE_COUNT_FOUR, LINK_RATE_HIGH,
-			LINK_SPREAD_05_DOWNSPREAD_30KHZ, false, 0};
-
-	/* Higher link settings based on feature supported */
-	if (link->link_enc->features.flags.bits.IS_HBR2_CAPABLE)
-		max_link_cap.link_rate = LINK_RATE_HIGH2;
-
-	if (link->link_enc->features.flags.bits.IS_HBR3_CAPABLE)
-		max_link_cap.link_rate = LINK_RATE_HIGH3;
+	struct dc_link_settings max_link_cap = {0};
 
-	if (link->link_enc->funcs->get_max_link_cap)
-		link->link_enc->funcs->get_max_link_cap(link->link_enc, &max_link_cap);
+	/* get max link encoder capability */
+	link->link_enc->funcs->get_max_link_cap(link->link_enc, &max_link_cap);
 
 	/* Lower link settings based on sink's link cap */
 	if (link->reported_link_cap.lane_count < max_link_cap.lane_count)
@@ -2426,7 +2417,7 @@ static bool handle_hpd_irq_psr_sink(struct dc_link *link)
 {
 	union dpcd_psr_configuration psr_configuration;
 
-	if (!link->psr_feature_enabled)
+	if (!link->psr_settings.psr_feature_enabled)
 		return false;
 
 	dm_helpers_dp_read_dpcd(
@@ -2530,7 +2521,7 @@ static void dp_test_send_phy_test_pattern(struct dc_link *link)
 	/* get phy test pattern and pattern parameters from DP receiver */
 	core_link_read_dpcd(
 			link,
-			DP_TEST_PHY_PATTERN,
+			DP_PHY_TEST_PATTERN,
 			&dpcd_test_pattern.raw,
 			sizeof(dpcd_test_pattern));
 	core_link_read_dpcd(
@@ -2908,6 +2899,12 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpd
 					sizeof(hpd_irq_dpcd_data),
 					"Status: ");
 
+		for (i = 0; i < MAX_PIPES; i++) {
+			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
+			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
+				link->dc->hwss.blank_stream(pipe_ctx);
+		}
+
 		for (i = 0; i < MAX_PIPES; i++) {
 			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
 			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
@@ -2927,6 +2924,12 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpd
 		if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)
 			dc_link_reallocate_mst_payload(link);
 
+		for (i = 0; i < MAX_PIPES; i++) {
+			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
+			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
+				link->dc->hwss.unblank_stream(pipe_ctx, &previous_link_settings);
+		}
+
 		status = false;
 		if (out_link_loss)
 			*out_link_loss = true;
@@ -4227,6 +4230,21 @@ void dp_set_fec_enable(struct dc_link *link, bool enable)
 void dpcd_set_source_specific_data(struct dc_link *link)
 {
 	const uint32_t post_oui_delay = 30; // 30ms
+	uint8_t dspc = 0;
+	enum dc_status ret;
+
+	ret = core_link_read_dpcd(link, DP_DOWN_STREAM_PORT_COUNT, &dspc,
+				  sizeof(dspc));
+
+	if (ret != DC_OK) {
+		DC_LOG_ERROR("Error in DP aux read transaction,"
+			     " not writing source specific data\n");
+		return;
+	}
+
+	/* Return if OUI unsupported */
+	if (!(dspc & DP_OUI_SUPPORT))
+		return;
 
 	if (!link->dc->vendor_signature.is_valid) {
 		struct dpcd_amd_signature amd_signature;
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
index 51e0ee6e7695..6590f51caefa 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
@@ -400,7 +400,7 @@ static bool dp_set_dsc_on_rx(struct pipe_ctx *pipe_ctx, bool enable)
 	struct dc_stream_state *stream = pipe_ctx->stream;
 	bool result = false;
 
-	if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
+	if (dc_is_virtual_signal(stream->signal) || IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
 		result = true;
 	else
 		result = dm_helpers_dp_write_dsc_enable(dc->ctx, stream, enable);
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index f4bcc71b2920..1a01c038632b 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -692,6 +692,9 @@ static void calculate_viewport(struct pipe_ctx *pipe_ctx)
 	/* Round up, assume original video size always even dimensions */
 	data->viewport_c.width = (data->viewport.width + vpc_div - 1) / vpc_div;
 	data->viewport_c.height = (data->viewport.height + vpc_div - 1) / vpc_div;
+
+	data->viewport_unadjusted = data->viewport;
+	data->viewport_c_unadjusted = data->viewport_c;
 }
 
 static void calculate_recout(struct pipe_ctx *pipe_ctx)
@@ -1061,8 +1064,8 @@ bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx)
 
 	calculate_viewport(pipe_ctx);
 
-	if (pipe_ctx->plane_res.scl_data.viewport.height < 16 ||
-		pipe_ctx->plane_res.scl_data.viewport.width < 16) {
+	if (pipe_ctx->plane_res.scl_data.viewport.height < 12 ||
+		pipe_ctx->plane_res.scl_data.viewport.width < 12) {
 		if (store_h_border_left) {
 			restore_border_left_from_dst(pipe_ctx,
 				store_h_border_left);
@@ -1358,9 +1361,6 @@ bool dc_add_plane_to_context(
 	dc_plane_state_retain(plane_state);
 
 	while (head_pipe) {
-		tail_pipe = resource_get_tail_pipe(&context->res_ctx, head_pipe);
-		ASSERT(tail_pipe);
-
 		free_pipe = acquire_free_pipe_for_head(context, pool, head_pipe);
 
 	#if defined(CONFIG_DRM_AMD_DC_DCN)
@@ -1378,6 +1378,8 @@ bool dc_add_plane_to_context(
 		free_pipe->plane_state = plane_state;
 
 		if (head_pipe != free_pipe) {
+			tail_pipe = resource_get_tail_pipe(&context->res_ctx, head_pipe);
+			ASSERT(tail_pipe);
 			free_pipe->stream_res.tg = tail_pipe->stream_res.tg;
 			free_pipe->stream_res.abm = tail_pipe->stream_res.abm;
 			free_pipe->stream_res.opp = tail_pipe->stream_res.opp;
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_sink.c b/drivers/gpu/drm/amd/display/dc/core/dc_sink.c
index a249a0e5edd0..9e16af22e4aa 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_sink.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_sink.c
@@ -54,6 +54,7 @@ static bool dc_sink_construct(struct dc_sink *sink, const struct dc_sink_init_da
 	sink->ctx = link->ctx;
 	sink->dongle_max_pix_clk = init_params->dongle_max_pix_clk;
 	sink->converter_disable_audio = init_params->converter_disable_audio;
+	sink->is_mst_legacy = init_params->sink_is_legacy;
 	sink->dc_container_id = NULL;
 	sink->sink_id = init_params->link->ctx->dc_sink_id_count;
 	// increment dc_sink_id_count because we don't want two sinks with same ID
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
index 6ddbb00ed37a..4f0e7203dba4 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
@@ -231,34 +231,6 @@ struct dc_stream_status *dc_stream_get_status(
 	return dc_stream_get_status_from_state(dc->current_state, stream);
 }
 
-static void delay_cursor_until_vupdate(struct pipe_ctx *pipe_ctx, struct dc *dc)
-{
-#if defined(CONFIG_DRM_AMD_DC_DCN)
-	unsigned int vupdate_line;
-	unsigned int lines_to_vupdate, us_to_vupdate, vpos, nvpos;
-	struct dc_stream_state *stream = pipe_ctx->stream;
-	unsigned int us_per_line;
-
-	if (stream->ctx->asic_id.chip_family == FAMILY_RV &&
-			ASICREV_IS_RAVEN(stream->ctx->asic_id.hw_internal_rev)) {
-
-		vupdate_line = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
-		if (!dc_stream_get_crtc_position(dc, &stream, 1, &vpos, &nvpos))
-			return;
-
-		if (vpos >= vupdate_line)
-			return;
-
-		us_per_line = stream->timing.h_total * 10000 / stream->timing.pix_clk_100hz;
-		lines_to_vupdate = vupdate_line - vpos;
-		us_to_vupdate = lines_to_vupdate * us_per_line;
-
-		/* 70 us is a conservative estimate of cursor update time*/
-		if (us_to_vupdate < 70)
-			udelay(us_to_vupdate);
-	}
-#endif
-}
 
 /**
  * dc_stream_set_cursor_attributes() - Update cursor attributes and set cursor surface address
@@ -298,9 +270,7 @@ bool dc_stream_set_cursor_attributes(
 
 		if (!pipe_to_program) {
 			pipe_to_program = pipe_ctx;
-
-			delay_cursor_until_vupdate(pipe_ctx, dc);
-			dc->hwss.pipe_control_lock(dc, pipe_to_program, true);
+			dc->hwss.cursor_lock(dc, pipe_to_program, true);
 		}
 
 		dc->hwss.set_cursor_attribute(pipe_ctx);
@@ -309,7 +279,7 @@ bool dc_stream_set_cursor_attributes(
 	}
 
 	if (pipe_to_program)
-		dc->hwss.pipe_control_lock(dc, pipe_to_program, false);
+		dc->hwss.cursor_lock(dc, pipe_to_program, false);
 
 	return true;
 }
@@ -349,16 +319,14 @@ bool dc_stream_set_cursor_position(
 
 		if (!pipe_to_program) {
 			pipe_to_program = pipe_ctx;
-
-			delay_cursor_until_vupdate(pipe_ctx, dc);
-			dc->hwss.pipe_control_lock(dc, pipe_to_program, true);
+			dc->hwss.cursor_lock(dc, pipe_to_program, true);
 		}
 
 		dc->hwss.set_cursor_position(pipe_ctx);
 	}
 
 	if (pipe_to_program)
-		dc->hwss.pipe_control_lock(dc, pipe_to_program, false);
+		dc->hwss.cursor_lock(dc, pipe_to_program, false);
 
 	return true;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 1935cf6601eb..17075f99bc54 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -29,6 +29,9 @@
 #include "dc_types.h"
 #include "grph_object_defs.h"
 #include "logger_types.h"
+#if defined(CONFIG_DRM_AMD_DC_HDCP)
+#include "hdcp_types.h"
+#endif
 #include "gpio_types.h"
 #include "link_service_types.h"
 #include "grph_object_ctrl_defs.h"
@@ -39,7 +42,7 @@
 #include "inc/hw/dmcu.h"
 #include "dml/display_mode_lib.h"
 
-#define DC_VER "3.2.76"
+#define DC_VER "3.2.83.1"
 
 #define MAX_SURFACES 3
 #define MAX_PLANES 6
@@ -95,6 +98,49 @@ struct dc_plane_cap {
 	} max_downscale_factor;
 };
 
+// Color management caps (DPP and MPC)
+struct rom_curve_caps {
+	uint16_t srgb : 1;
+	uint16_t bt2020 : 1;
+	uint16_t gamma2_2 : 1;
+	uint16_t pq : 1;
+	uint16_t hlg : 1;
+};
+
+struct dpp_color_caps {
+	uint16_t dcn_arch : 1; // all DCE generations treated the same
+	// input lut is different than most LUTs, just plain 256-entry lookup
+	uint16_t input_lut_shared : 1; // shared with DGAM
+	uint16_t icsc : 1;
+	uint16_t dgam_ram : 1;
+	uint16_t post_csc : 1; // before gamut remap
+	uint16_t gamma_corr : 1;
+
+	// hdr_mult and gamut remap always available in DPP (in that order)
+	// 3d lut implies shaper LUT,
+	// it may be shared with MPC - check MPC:shared_3d_lut flag
+	uint16_t hw_3d_lut : 1;
+	uint16_t ogam_ram : 1; // blnd gam
+	uint16_t ocsc : 1;
+	struct rom_curve_caps dgam_rom_caps;
+	struct rom_curve_caps ogam_rom_caps;
+};
+
+struct mpc_color_caps {
+	uint16_t gamut_remap : 1;
+	uint16_t ogam_ram : 1;
+	uint16_t ocsc : 1;
+	uint16_t num_3dluts : 3; //3d lut always assumes a preceding shaper LUT
+	uint16_t shared_3d_lut:1; //can be in either DPP or MPC, but single instance
+
+	struct rom_curve_caps ogam_rom_caps;
+};
+
+struct dc_color_caps {
+	struct dpp_color_caps dpp;
+	struct mpc_color_caps mpc;
+};
+
 struct dc_caps {
 	uint32_t max_streams;
 	uint32_t max_links;
@@ -117,9 +163,9 @@ struct dc_caps {
 	bool psp_setup_panel_mode;
 	bool extended_aux_timeout_support;
 	bool dmcub_support;
-	bool hw_3d_lut;
 	enum dp_protocol_version max_dp_protocol_version;
 	struct dc_plane_cap planes[MAX_PLANES];
+	struct dc_color_caps color;
 };
 
 struct dc_bug_wa {
@@ -230,7 +276,7 @@ struct dc_config {
 	bool forced_clocks;
 	bool disable_extended_timeout_support; // Used to disable extended timeout and lttpr feature as well
 	bool multi_mon_pp_mclk_switch;
-	bool psr_on_dmub;
+	bool disable_dmcu;
 };
 
 enum visual_confirm {
@@ -238,6 +284,7 @@ enum visual_confirm {
 	VISUAL_CONFIRM_SURFACE = 1,
 	VISUAL_CONFIRM_HDR = 2,
 	VISUAL_CONFIRM_MPCTREE = 4,
+	VISUAL_CONFIRM_PSR = 5,
 };
 
 enum dcc_option {
@@ -474,6 +521,7 @@ struct dc_bounding_box_overrides {
 	int urgent_latency_ns;
 	int percent_of_ideal_drambw;
 	int dram_clock_change_latency_ns;
+	int dummy_clock_change_latency_ns;
 	/* This forces a hard min on the DCFCLK we use
 	 * for DML.  Unlike the debug option for forcing
 	 * DCFCLK, this override affects watermark calculations
@@ -987,6 +1035,7 @@ struct dpcd_caps {
 	union dpcd_fec_capability fec_cap;
 	struct dpcd_dsc_capabilities dsc_caps;
 	struct dc_lttpr_caps lttpr_caps;
+	struct psr_caps psr_caps;
 
 };
 
@@ -1004,6 +1053,35 @@ union dpcd_sink_ext_caps {
 	uint8_t raw;
 };
 
+#if defined(CONFIG_DRM_AMD_DC_HDCP)
+union hdcp_rx_caps {
+	struct {
+		uint8_t version;
+		uint8_t reserved;
+		struct {
+			uint8_t repeater	: 1;
+			uint8_t hdcp_capable	: 1;
+			uint8_t reserved	: 6;
+		} byte0;
+	} fields;
+	uint8_t raw[3];
+};
+
+union hdcp_bcaps {
+	struct {
+		uint8_t HDCP_CAPABLE:1;
+		uint8_t REPEATER:1;
+		uint8_t RESERVED:6;
+	} bits;
+	uint8_t raw;
+};
+
+struct hdcp_caps {
+	union hdcp_rx_caps rx_caps;
+	union hdcp_bcaps bcaps;
+};
+#endif
+
 #include "dc_link.h"
 
 /*******************************************************************************
@@ -1046,7 +1124,7 @@ struct dc_sink {
 	void *priv;
 	struct stereo_3d_features features_3d[TIMING_3D_FORMAT_MAX];
 	bool converter_disable_audio;
-
+	bool is_mst_legacy;
 	struct dc_sink_dsc_caps dsc_caps;
 	struct dc_sink_fec_caps fec_caps;
 
@@ -1073,6 +1151,7 @@ struct dc_sink_init_data {
 	struct dc_link *link;
 	uint32_t dongle_max_pix_clk;
 	bool converter_disable_audio;
+	bool sink_is_legacy;
 };
 
 struct dc_sink *dc_sink_create(const struct dc_sink_init_data *init_params);
@@ -1104,9 +1183,16 @@ void dc_set_power_state(
 		struct dc *dc,
 		enum dc_acpi_cm_power_state power_state);
 void dc_resume(struct dc *dc);
-unsigned int dc_get_current_backlight_pwm(struct dc *dc);
-unsigned int dc_get_target_backlight_pwm(struct dc *dc);
 
+#if defined(CONFIG_DRM_AMD_DC_HDCP)
+/*
+ * HDCP Interfaces
+ */
+enum hdcp_message_status dc_process_hdcp_msg(
+		enum signal_type signal,
+		struct dc_link *link,
+		struct hdcp_protection_message *message_info);
+#endif
 bool dc_is_dmcu_initialized(struct dc *dc);
 
 enum dc_status dc_set_clock(struct dc *dc, enum dc_clock_type clock_type, uint32_t clk_khz, uint32_t stepping);
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c
index 59c298a6484f..907e0c5374bb 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c
+++ b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c
@@ -58,7 +58,7 @@ void dc_dmub_srv_destroy(struct dc_dmub_srv **dmub_srv)
 }
 
 void dc_dmub_srv_cmd_queue(struct dc_dmub_srv *dc_dmub_srv,
-			   struct dmub_cmd_header *cmd)
+			   union dmub_rb_cmd *cmd)
 {
 	struct dmub_srv *dmub = dc_dmub_srv->dmub;
 	struct dc_context *dc_ctx = dc_dmub_srv->ctx;
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h
index 754b6077539c..6689ae33dee8 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h
@@ -27,10 +27,9 @@
 #define _DMUB_DC_SRV_H_
 
 #include "os_types.h"
-#include "../dmub/inc/dmub_cmd.h"
+#include "dmub/inc/dmub_cmd.h"
 
 struct dmub_srv;
-struct dmub_cmd_header;
 
 struct dc_reg_helper_state {
 	bool gather_in_progress;
@@ -49,7 +48,7 @@ struct dc_dmub_srv {
 };
 
 void dc_dmub_srv_cmd_queue(struct dc_dmub_srv *dc_dmub_srv,
-			   struct dmub_cmd_header *cmd);
+			   union dmub_rb_cmd *cmd);
 
 void dc_dmub_srv_cmd_execute(struct dc_dmub_srv *dc_dmub_srv);
 
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
index bb2730e9521e..af177c087d3b 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
@@ -740,5 +740,11 @@ struct dpcd_dsc_capabilities {
 	union dpcd_dsc_ext_capabilities dsc_ext_caps;
 };
 
+/* These parameters are from PSR capabilities reported by Sink DPCD */
+struct psr_caps {
+	unsigned char psr_version;
+	unsigned int psr_rfb_setup_time;
+	bool psr_exit_link_training_required;
+};
 
 #endif /* DC_DP_TYPES_H */
diff --git a/drivers/gpu/drm/amd/display/dc/dc_helper.c b/drivers/gpu/drm/amd/display/dc/dc_helper.c
index 737048d8a96c..85a0170be544 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_helper.c
+++ b/drivers/gpu/drm/amd/display/dc/dc_helper.c
@@ -50,7 +50,7 @@ static inline void submit_dmub_read_modify_write(
 	gather = ctx->dmub_srv->reg_helper_offload.gather_in_progress;
 	ctx->dmub_srv->reg_helper_offload.gather_in_progress = false;
 
-	dc_dmub_srv_cmd_queue(ctx->dmub_srv, &cmd_buf->header);
+	dc_dmub_srv_cmd_queue(ctx->dmub_srv, &offload->cmd_data);
 
 	ctx->dmub_srv->reg_helper_offload.gather_in_progress = gather;
 
@@ -73,7 +73,7 @@ static inline void submit_dmub_burst_write(
 	gather = ctx->dmub_srv->reg_helper_offload.gather_in_progress;
 	ctx->dmub_srv->reg_helper_offload.gather_in_progress = false;
 
-	dc_dmub_srv_cmd_queue(ctx->dmub_srv, &cmd_buf->header);
+	dc_dmub_srv_cmd_queue(ctx->dmub_srv, &offload->cmd_data);
 
 	ctx->dmub_srv->reg_helper_offload.gather_in_progress = gather;
 
@@ -92,7 +92,7 @@ static inline void submit_dmub_reg_wait(
 	gather = ctx->dmub_srv->reg_helper_offload.gather_in_progress;
 	ctx->dmub_srv->reg_helper_offload.gather_in_progress = false;
 
-	dc_dmub_srv_cmd_queue(ctx->dmub_srv, &cmd_buf->header);
+	dc_dmub_srv_cmd_queue(ctx->dmub_srv, &offload->cmd_data);
 
 	memset(cmd_buf, 0, sizeof(*cmd_buf));
 	offload->reg_seq_count = 0;
diff --git a/drivers/gpu/drm/amd/display/dc/dc_link.h b/drivers/gpu/drm/amd/display/dc/dc_link.h
index 00ff5e98278c..80fb4149f36a 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_link.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_link.h
@@ -29,6 +29,7 @@
 #include "dc.h"
 #include "dc_types.h"
 #include "grph_object_defs.h"
+#include "dmub/inc/dmub_cmd_dal.h"
 
 enum dc_link_fec_state {
 	dc_link_fec_not_ready,
@@ -66,6 +67,22 @@ struct time_stamp {
 struct link_trace {
 	struct time_stamp time_stamp;
 };
+
+/* PSR feature flags */
+struct psr_settings {
+	bool psr_feature_enabled;		// PSR is supported by sink
+	bool psr_allow_active;			// PSR is currently active
+	enum psr_version psr_version;		// Internal PSR version, determined based on DPCD
+
+	/* These parameters are calculated in Driver,
+	 * based on display timing and Sink capabilities.
+	 * If VBLANK region is too small and Sink takes a long time
+	 * to set up RFB, it may take an extra frame to enter PSR state.
+	 */
+	bool psr_frame_capture_indication_req;
+	unsigned int psr_sdp_transmit_line_num_deadline;
+};
+
 /*
  * A link contains one or more sinks and their connected status.
  * The currently active signal type (HDMI, DP-SST, DP-MST) is also reported.
@@ -118,6 +135,7 @@ struct dc_link {
 
 	struct dc_context *ctx;
 
+	struct panel_cntl *panel_cntl;
 	struct link_encoder *link_enc;
 	struct graphics_object_id link_id;
 	union ddi_channel_mapping ddi_channel_mapping;
@@ -126,11 +144,14 @@ struct dc_link {
 	uint32_t dongle_max_pix_clk;
 	unsigned short chip_caps;
 	unsigned int dpcd_sink_count;
+#if defined(CONFIG_DRM_AMD_DC_HDCP)
+	struct hdcp_caps hdcp_caps;
+#endif
 	enum edp_revision edp_revision;
-	bool psr_feature_enabled;
-	bool psr_allow_active;
 	union dpcd_sink_ext_caps dpcd_sink_ext_caps;
 
+	struct psr_settings psr_settings;
+
 	/* MST record stream using this link */
 	struct link_flags {
 		bool dp_keep_receiver_powered;
@@ -197,6 +218,8 @@ bool dc_link_set_default_brightness_aux(struct dc_link *link);
 
 int dc_link_get_backlight_level(const struct dc_link *dc_link);
 
+int dc_link_get_target_backlight_pwm(const struct dc_link *link);
+
 bool dc_link_set_abm_disable(const struct dc_link *dc_link);
 
 bool dc_link_set_psr_allow_active(struct dc_link *dc_link, bool enable, bool wait);
@@ -290,6 +313,10 @@ bool dc_link_detect_sink(struct dc_link *link, enum dc_connection_type *type);
  * DPCD access interfaces
  */
 
+#ifdef CONFIG_DRM_AMD_DC_HDCP
+bool dc_link_is_hdcp14(struct dc_link *link);
+bool dc_link_is_hdcp22(struct dc_link *link);
+#endif
 void dc_link_set_drive_settings(struct dc *dc,
 				struct link_training_settings *lt_settings,
 				const struct dc_link *link);
diff --git a/drivers/gpu/drm/amd/display/dc/dc_stream.h b/drivers/gpu/drm/amd/display/dc/dc_stream.h
index a5c7ef47b8d3..49aad691e687 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_stream.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_stream.h
@@ -167,8 +167,6 @@ struct dc_stream_state {
 
 	/* TODO: custom INFO packets */
 	/* TODO: ABM info (DMCU) */
-	/* PSR info */
-	unsigned char psr_version;
 	/* TODO: CEA VIC */
 
 	/* DMCU info */
diff --git a/drivers/gpu/drm/amd/display/dc/dce/Makefile b/drivers/gpu/drm/amd/display/dc/dce/Makefile
index fbfcff700971..f704a8fd52e8 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/Makefile
+++ b/drivers/gpu/drm/amd/display/dc/dce/Makefile
@@ -29,7 +29,7 @@
 DCE = dce_audio.o dce_stream_encoder.o dce_link_encoder.o dce_hwseq.o \
 dce_mem_input.o dce_clock_source.o dce_scl_filters.o dce_transform.o \
 dce_opp.o dce_dmcu.o dce_abm.o dce_ipp.o dce_aux.o \
-dce_i2c.o dce_i2c_hw.o dce_i2c_sw.o dmub_psr.o
+dce_i2c.o dce_i2c_hw.o dce_i2c_sw.o dmub_psr.o dmub_abm.o dce_panel_cntl.o
 
 AMD_DAL_DCE = $(addprefix $(AMDDALPATH)/dc/dce/,$(DCE))
 
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
index b8a3fc505c9b..c15e60fb5ebc 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
@@ -55,7 +55,7 @@
 
 #define MCP_DISABLE_ABM_IMMEDIATELY 255
 
-static bool dce_abm_set_pipe(struct abm *abm, uint32_t controller_id)
+static bool dce_abm_set_pipe(struct abm *abm, uint32_t controller_id, uint32_t panel_inst)
 {
 	struct dce_abm *abm_dce = TO_DCE_ABM(abm);
 	uint32_t rampingBoundary = 0xFFFF;
@@ -201,7 +201,8 @@ static void dmcu_set_backlight_level(
 	struct dce_abm *abm_dce,
 	uint32_t backlight_pwm_u16_16,
 	uint32_t frame_ramp,
-	uint32_t controller_id)
+	uint32_t controller_id,
+	uint32_t panel_id)
 {
 	unsigned int backlight_8_bit = 0;
 	uint32_t s2;
@@ -213,7 +214,7 @@ static void dmcu_set_backlight_level(
 		// Take MSB of fractional part since backlight is not max
 		backlight_8_bit = (backlight_pwm_u16_16 >> 8) & 0xFF;
 
-	dce_abm_set_pipe(&abm_dce->base, controller_id);
+	dce_abm_set_pipe(&abm_dce->base, controller_id, panel_id);
 
 	/* waitDMCUReadyForCmd */
 	REG_WAIT(MASTER_COMM_CNTL_REG, MASTER_COMM_INTERRUPT,
@@ -331,14 +332,14 @@ static bool dce_abm_set_level(struct abm *abm, uint32_t level)
 	return true;
 }
 
-static bool dce_abm_immediate_disable(struct abm *abm)
+static bool dce_abm_immediate_disable(struct abm *abm, uint32_t panel_inst)
 {
 	struct dce_abm *abm_dce = TO_DCE_ABM(abm);
 
 	if (abm->dmcu_is_running == false)
 		return true;
 
-	dce_abm_set_pipe(abm, MCP_DISABLE_ABM_IMMEDIATELY);
+	dce_abm_set_pipe(abm, MCP_DISABLE_ABM_IMMEDIATELY, panel_inst);
 
 	abm->stored_backlight_registers.BL_PWM_CNTL =
 		REG_READ(BL_PWM_CNTL);
@@ -420,7 +421,8 @@ static bool dce_abm_set_backlight_level_pwm(
 		unsigned int backlight_pwm_u16_16,
 		unsigned int frame_ramp,
 		unsigned int controller_id,
-		bool use_smooth_brightness)
+		unsigned int panel_inst,
+		bool fw_set_brightness)
 {
 	struct dce_abm *abm_dce = TO_DCE_ABM(abm);
 
@@ -428,11 +430,12 @@ static bool dce_abm_set_backlight_level_pwm(
 			backlight_pwm_u16_16, backlight_pwm_u16_16);
 
 	/* If DMCU is in reset state, DMCU is uninitialized */
-	if (use_smooth_brightness)
+	if (fw_set_brightness)
 		dmcu_set_backlight_level(abm_dce,
 				backlight_pwm_u16_16,
 				frame_ramp,
-				controller_id);
+				controller_id,
+				panel_inst);
 	else
 		driver_set_backlight_level(abm_dce, backlight_pwm_u16_16);
 
@@ -447,6 +450,7 @@ static const struct abm_funcs dce_funcs = {
 	.set_backlight_level_pwm = dce_abm_set_backlight_level_pwm,
 	.get_current_backlight = dce_abm_get_current_backlight,
 	.get_target_backlight = dce_abm_get_target_backlight,
+	.init_abm_config = NULL,
 	.set_abm_immediate_disable = dce_abm_immediate_disable
 };
 
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c
index 2e992fbc0d71..d2ad0504b0de 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c
@@ -1014,39 +1014,6 @@ struct pixel_rate_range_table_entry {
 	unsigned short div_factor;
 };
 
-static const struct pixel_rate_range_table_entry video_optimized_pixel_rates[] = {
-	// /1.001 rates
-	{25170, 25180, 25200, 1000, 1001},	//25.2MHz   ->   25.17
-	{59340, 59350, 59400, 1000, 1001},	//59.4Mhz   ->   59.340
-	{74170, 74180, 74250, 1000, 1001},	//74.25Mhz  ->   74.1758
-	{125870, 125880, 126000, 1000, 1001},	//126Mhz    ->  125.87
-	{148350, 148360, 148500, 1000, 1001},	//148.5Mhz  ->  148.3516
-	{167830, 167840, 168000, 1000, 1001},	//168Mhz    ->  167.83
-	{222520, 222530, 222750, 1000, 1001},	//222.75Mhz ->  222.527
-	{257140, 257150, 257400, 1000, 1001},	//257.4Mhz  ->  257.1429
-	{296700, 296710, 297000, 1000, 1001},	//297Mhz    ->  296.7033
-	{342850, 342860, 343200, 1000, 1001},	//343.2Mhz  ->  342.857
-	{395600, 395610, 396000, 1000, 1001},	//396Mhz    ->  395.6
-	{409090, 409100, 409500, 1000, 1001},	//409.5Mhz  ->  409.091
-	{445050, 445060, 445500, 1000, 1001},	//445.5Mhz  ->  445.055
-	{467530, 467540, 468000, 1000, 1001},	//468Mhz    ->  467.5325
-	{519230, 519240, 519750, 1000, 1001},	//519.75Mhz ->  519.231
-	{525970, 525980, 526500, 1000, 1001},	//526.5Mhz  ->  525.974
-	{545450, 545460, 546000, 1000, 1001},	//546Mhz    ->  545.455
-	{593400, 593410, 594000, 1000, 1001},	//594Mhz    ->  593.4066
-	{623370, 623380, 624000, 1000, 1001},	//624Mhz    ->  623.377
-	{692300, 692310, 693000, 1000, 1001},	//693Mhz    ->  692.308
-	{701290, 701300, 702000, 1000, 1001},	//702Mhz    ->  701.2987
-	{791200, 791210, 792000, 1000, 1001},	//792Mhz    ->  791.209
-	{890100, 890110, 891000, 1000, 1001},	//891Mhz    ->  890.1099
-	{1186810, 1186820, 1188000, 1000, 1001},//1188Mhz   -> 1186.8131
-
-	// *1.001 rates
-	{27020, 27030, 27000, 1001, 1000}, //27Mhz
-	{54050, 54060, 54000, 1001, 1000}, //54Mhz
-	{108100, 108110, 108000, 1001, 1000},//108Mhz
-};
-
 static bool dcn20_program_pix_clk(
 		struct clock_source *clock_source,
 		struct pixel_clk_params *pix_clk_params,
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
index c5aa1f48593a..5479d959ec62 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
@@ -27,10 +27,6 @@
 
 #include "dc_types.h"
 
-#define BL_REG_LIST()\
-	SR(LVTMA_PWRSEQ_CNTL), \
-	SR(LVTMA_PWRSEQ_STATE)
-
 #define HWSEQ_DCEF_REG_LIST_DCE8() \
 	.DCFE_CLOCK_CONTROL[0] = mmCRTC0_CRTC_DCFE_CLOCK_CONTROL, \
 	.DCFE_CLOCK_CONTROL[1] = mmCRTC1_CRTC_DCFE_CLOCK_CONTROL, \
@@ -94,20 +90,17 @@
 	SRII(BLND_CONTROL, BLND, 0),\
 	SRII(BLND_CONTROL, BLND, 1),\
 	SR(BLNDV_CONTROL),\
-	HWSEQ_PIXEL_RATE_REG_LIST(CRTC),\
-	BL_REG_LIST()
+	HWSEQ_PIXEL_RATE_REG_LIST(CRTC)
 
 #define HWSEQ_DCE8_REG_LIST() \
 	HWSEQ_DCEF_REG_LIST_DCE8(), \
 	HWSEQ_BLND_REG_LIST(), \
-	HWSEQ_PIXEL_RATE_REG_LIST(CRTC),\
-	BL_REG_LIST()
+	HWSEQ_PIXEL_RATE_REG_LIST(CRTC)
 
 #define HWSEQ_DCE10_REG_LIST() \
 	HWSEQ_DCEF_REG_LIST(), \
 	HWSEQ_BLND_REG_LIST(), \
-	HWSEQ_PIXEL_RATE_REG_LIST(CRTC), \
-	BL_REG_LIST()
+	HWSEQ_PIXEL_RATE_REG_LIST(CRTC)
 
 #define HWSEQ_ST_REG_LIST() \
 	HWSEQ_DCE11_REG_LIST_BASE(), \
@@ -134,8 +127,7 @@
 	SR(DCHUB_FB_LOCATION),\
 	SR(DCHUB_AGP_BASE),\
 	SR(DCHUB_AGP_BOT),\
-	SR(DCHUB_AGP_TOP), \
-	BL_REG_LIST()
+	SR(DCHUB_AGP_TOP)
 
 #define HWSEQ_VG20_REG_LIST() \
 	HWSEQ_DCE120_REG_LIST(),\
@@ -144,8 +136,7 @@
 #define HWSEQ_DCE112_REG_LIST() \
 	HWSEQ_DCE10_REG_LIST(), \
 	HWSEQ_PIXEL_RATE_REG_LIST(CRTC), \
-	HWSEQ_PHYPLL_REG_LIST(CRTC), \
-	BL_REG_LIST()
+	HWSEQ_PHYPLL_REG_LIST(CRTC)
 
 #define HWSEQ_DCN_REG_LIST()\
 	SR(REFCLK_CNTL), \
@@ -207,8 +198,7 @@
 	SR(D3VGA_CONTROL), \
 	SR(D4VGA_CONTROL), \
 	SR(VGA_TEST_CONTROL), \
-	SR(DC_IP_REQUEST_CNTL), \
-	BL_REG_LIST()
+	SR(DC_IP_REQUEST_CNTL)
 
 #define HWSEQ_DCN2_REG_LIST()\
 	HWSEQ_DCN_REG_LIST(), \
@@ -273,8 +263,7 @@
 	SR(D4VGA_CONTROL), \
 	SR(D5VGA_CONTROL), \
 	SR(D6VGA_CONTROL), \
-	SR(DC_IP_REQUEST_CNTL), \
-	BL_REG_LIST()
+	SR(DC_IP_REQUEST_CNTL)
 
 #define HWSEQ_DCN21_REG_LIST()\
 	HWSEQ_DCN_REG_LIST(), \
@@ -324,15 +313,9 @@
 	SR(D4VGA_CONTROL), \
 	SR(D5VGA_CONTROL), \
 	SR(D6VGA_CONTROL), \
-	SR(DC_IP_REQUEST_CNTL), \
-	BL_REG_LIST()
+	SR(DC_IP_REQUEST_CNTL)
 
 struct dce_hwseq_registers {
-
-		/* Backlight registers */
-	uint32_t LVTMA_PWRSEQ_CNTL;
-	uint32_t LVTMA_PWRSEQ_STATE;
-
 	uint32_t DCFE_CLOCK_CONTROL[6];
 	uint32_t DCFEV_CLOCK_CONTROL;
 	uint32_t DC_MEM_GLOBAL_PWR_REQ_CNTL;
@@ -465,26 +448,18 @@ struct dce_hwseq_registers {
 	HWS_SF1(blk, PHYPLL_PIXEL_RATE_CNTL, PHYPLL_PIXEL_RATE_SOURCE, mask_sh),\
 	HWS_SF1(blk, PHYPLL_PIXEL_RATE_CNTL, PIXEL_RATE_PLL_SOURCE, mask_sh)
 
-#define HWSEQ_LVTMA_MASK_SH_LIST(mask_sh)\
-	HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_BLON, mask_sh),\
-	HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_DIGON, mask_sh),\
-	HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_DIGON_OVRD, mask_sh),\
-	HWS_SF(, LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, mask_sh)
-
 #define HWSEQ_DCE8_MASK_SH_LIST(mask_sh)\
 	.DCFE_CLOCK_ENABLE = CRTC_DCFE_CLOCK_CONTROL__CRTC_DCFE_CLOCK_ENABLE ## mask_sh, \
 	HWS_SF(BLND_, V_UPDATE_LOCK, BLND_DCP_GRPH_V_UPDATE_LOCK, mask_sh),\
 	HWS_SF(BLND_, V_UPDATE_LOCK, BLND_SCL_V_UPDATE_LOCK, mask_sh),\
 	HWS_SF(BLND_, V_UPDATE_LOCK, BLND_DCP_GRPH_SURF_V_UPDATE_LOCK, mask_sh),\
 	HWS_SF(BLND_, CONTROL, BLND_MODE, mask_sh),\
-	HWSEQ_PIXEL_RATE_MASK_SH_LIST(mask_sh, CRTC0_),\
-	HWSEQ_LVTMA_MASK_SH_LIST(mask_sh)
+	HWSEQ_PIXEL_RATE_MASK_SH_LIST(mask_sh, CRTC0_)
 
 #define HWSEQ_DCE10_MASK_SH_LIST(mask_sh)\
 	HWSEQ_DCEF_MASK_SH_LIST(mask_sh, DCFE_),\
 	HWSEQ_BLND_MASK_SH_LIST(mask_sh, BLND_),\
-	HWSEQ_PIXEL_RATE_MASK_SH_LIST(mask_sh, CRTC0_),\
-	HWSEQ_LVTMA_MASK_SH_LIST(mask_sh)
+	HWSEQ_PIXEL_RATE_MASK_SH_LIST(mask_sh, CRTC0_)
 
 #define HWSEQ_DCE11_MASK_SH_LIST(mask_sh)\
 	HWSEQ_DCE10_MASK_SH_LIST(mask_sh),\
@@ -507,8 +482,7 @@ struct dce_hwseq_registers {
 	HWSEQ_BLND_MASK_SH_LIST(mask_sh, BLND0_BLND_),\
 	HWSEQ_PIXEL_RATE_MASK_SH_LIST(mask_sh, CRTC0_),\
 	HWSEQ_PHYPLL_MASK_SH_LIST(mask_sh, CRTC0_),\
-	HWSEQ_GFX9_DCHUB_MASK_SH_LIST(mask_sh),\
-	HWSEQ_LVTMA_MASK_SH_LIST(mask_sh)
+	HWSEQ_GFX9_DCHUB_MASK_SH_LIST(mask_sh)
 
 #define HWSEQ_VG20_MASK_SH_LIST(mask_sh)\
 	HWSEQ_DCE12_MASK_SH_LIST(mask_sh),\
@@ -570,8 +544,7 @@ struct dce_hwseq_registers {
 	HWS_SF(, D3VGA_CONTROL, D3VGA_MODE_ENABLE, mask_sh),\
 	HWS_SF(, D4VGA_CONTROL, D4VGA_MODE_ENABLE, mask_sh),\
 	HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_ENABLE, mask_sh),\
-	HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_RENDER_START, mask_sh),\
-	HWSEQ_LVTMA_MASK_SH_LIST(mask_sh)
+	HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_RENDER_START, mask_sh)
 
 #define HWSEQ_DCN2_MASK_SH_LIST(mask_sh)\
 	HWSEQ_DCN_MASK_SH_LIST(mask_sh), \
@@ -630,8 +603,7 @@ struct dce_hwseq_registers {
 	HWS_SF(, DOMAIN19_PG_STATUS, DOMAIN19_PGFSM_PWR_STATUS, mask_sh), \
 	HWS_SF(, DOMAIN20_PG_STATUS, DOMAIN20_PGFSM_PWR_STATUS, mask_sh), \
 	HWS_SF(, DOMAIN21_PG_STATUS, DOMAIN21_PGFSM_PWR_STATUS, mask_sh), \
-	HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh), \
-	HWSEQ_LVTMA_MASK_SH_LIST(mask_sh)
+	HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh)
 
 #define HWSEQ_DCN21_MASK_SH_LIST(mask_sh)\
 	HWSEQ_DCN_MASK_SH_LIST(mask_sh), \
@@ -671,10 +643,7 @@ struct dce_hwseq_registers {
 	HWS_SF(, DOMAIN16_PG_STATUS, DOMAIN16_PGFSM_PWR_STATUS, mask_sh), \
 	HWS_SF(, DOMAIN17_PG_STATUS, DOMAIN17_PGFSM_PWR_STATUS, mask_sh), \
 	HWS_SF(, DOMAIN18_PG_STATUS, DOMAIN18_PGFSM_PWR_STATUS, mask_sh), \
-	HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh), \
-	HWSEQ_LVTMA_MASK_SH_LIST(mask_sh), \
-	HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_BLON, mask_sh), \
-	HWS_SF(, LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, mask_sh)
+	HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh)
 
 #define HWSEQ_REG_FIELD_LIST(type) \
 	type DCFE_CLOCK_ENABLE; \
@@ -706,11 +675,7 @@ struct dce_hwseq_registers {
 	type PF_LFB_REGION;\
 	type PF_MAX_REGION;\
 	type ENABLE_L1_TLB;\
-	type SYSTEM_ACCESS_MODE;\
-	type LVTMA_BLON;\
-	type LVTMA_DIGON;\
-	type LVTMA_DIGON_OVRD;\
-	type LVTMA_PWRSEQ_TARGET_STATE_R;
+	type SYSTEM_ACCESS_MODE;
 
 #define HWSEQ_DCN_REG_FIELD_LIST(type) \
 	type HUBP_VTG_SEL; \
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
index 8527cce81c6f..8d8c84c81b34 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
@@ -118,7 +118,8 @@ static const struct link_encoder_funcs dce110_lnk_enc_funcs = {
 	.enable_hpd = dce110_link_encoder_enable_hpd,
 	.disable_hpd = dce110_link_encoder_disable_hpd,
 	.is_dig_enabled = dce110_is_dig_enabled,
-	.destroy = dce110_link_encoder_destroy
+	.destroy = dce110_link_encoder_destroy,
+	.get_max_link_cap = dce110_link_encoder_get_max_link_cap
 };
 
 static enum bp_result link_transmitter_control(
@@ -1389,3 +1390,20 @@ void dce110_link_encoder_disable_hpd(struct link_encoder *enc)
 
 	set_reg_field_value(value, 0, DC_HPD_CONTROL, DC_HPD_EN);
 }
+
+void dce110_link_encoder_get_max_link_cap(struct link_encoder *enc,
+	struct dc_link_settings *link_settings)
+{
+	/* Set Default link settings */
+	struct dc_link_settings max_link_cap = {LANE_COUNT_FOUR, LINK_RATE_HIGH,
+			LINK_SPREAD_05_DOWNSPREAD_30KHZ, false, 0};
+
+	/* Higher link settings based on feature supported */
+	if (enc->features.flags.bits.IS_HBR2_CAPABLE)
+		max_link_cap.link_rate = LINK_RATE_HIGH2;
+
+	if (enc->features.flags.bits.IS_HBR3_CAPABLE)
+		max_link_cap.link_rate = LINK_RATE_HIGH3;
+
+	*link_settings = max_link_cap;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h
index 3c9368df4093..384389f0e2c3 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h
@@ -271,4 +271,7 @@ void dce110_psr_program_secondary_packet(struct link_encoder *enc,
 
 bool dce110_is_dig_enabled(struct link_encoder *enc);
 
+void dce110_link_encoder_get_max_link_cap(struct link_encoder *enc,
+	struct dc_link_settings *link_settings);
+
 #endif /* __DC_LINK_ENCODER__DCE110_H__ */
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c b/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c
new file mode 100644
index 000000000000..d9b0ff7eb2a4
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "reg_helper.h"
+#include "core_types.h"
+#include "dc_dmub_srv.h"
+#include "panel_cntl.h"
+#include "dce_panel_cntl.h"
+
+#define TO_DCE_PANEL_CNTL(panel_cntl)\
+	container_of(panel_cntl, struct dce_panel_cntl, base)
+
+#define CTX \
+	dce_panel_cntl->base.ctx
+
+#define DC_LOGGER \
+	dce_panel_cntl->base.ctx->logger
+
+#define REG(reg)\
+	dce_panel_cntl->regs->reg
+
+#undef FN
+#define FN(reg_name, field_name) \
+	dce_panel_cntl->shift->field_name, dce_panel_cntl->mask->field_name
+
+void dce_panel_cntl_hw_init(struct panel_cntl *panel_cntl)
+{
+
+}
+
+bool dce_is_panel_backlight_on(struct panel_cntl *panel_cntl)
+{
+	struct dce_panel_cntl *dce_panel_cntl = TO_DCE_PANEL_CNTL(panel_cntl);
+	uint32_t value;
+
+	REG_GET(PWRSEQ_CNTL, BLON, &value);
+
+	return value;
+}
+
+bool dce_is_panel_powered_on(struct panel_cntl *panel_cntl)
+{
+	struct dce_panel_cntl *dce_panel_cntl = TO_DCE_PANEL_CNTL(panel_cntl);
+	uint32_t pwr_seq_state, dig_on, dig_on_ovrd;
+
+	REG_GET(PWRSEQ_STATE, PWRSEQ_TARGET_STATE_R, &pwr_seq_state);
+
+	REG_GET_2(PWRSEQ_CNTL, DIGON, &dig_on, DIGON_OVRD, &dig_on_ovrd);
+
+	return (pwr_seq_state == 1) || (dig_on == 1 && dig_on_ovrd == 1);
+}
+
+static void dce_panel_cntl_destroy(struct panel_cntl **panel_cntl)
+{
+	struct dce_panel_cntl *dce_panel_cntl = TO_DCE_PANEL_CNTL(*panel_cntl);
+
+	kfree(dce_panel_cntl);
+	*panel_cntl = NULL;
+}
+
+static const struct panel_cntl_funcs dce_link_panel_cntl_funcs = {
+	.destroy = dce_panel_cntl_destroy,
+	.hw_init = dce_panel_cntl_hw_init,
+	.is_panel_backlight_on = dce_is_panel_backlight_on,
+	.is_panel_powered_on = dce_is_panel_powered_on,
+
+};
+
+void dce_panel_cntl_construct(
+	struct dce_panel_cntl *dce_panel_cntl,
+	const struct panel_cntl_init_data *init_data,
+	const struct dce_panel_cntl_registers *regs,
+	const struct dce_panel_cntl_shift *shift,
+	const struct dce_panel_cntl_mask *mask)
+{
+	dce_panel_cntl->regs = regs;
+	dce_panel_cntl->shift = shift;
+	dce_panel_cntl->mask = mask;
+
+	dce_panel_cntl->base.funcs = &dce_link_panel_cntl_funcs;
+	dce_panel_cntl->base.ctx = init_data->ctx;
+	dce_panel_cntl->base.inst = init_data->inst;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.h b/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.h
new file mode 100644
index 000000000000..6dc6984f9248
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ *  and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __DC_PANEL_CNTL__DCE_H__
+#define __DC_PANEL_CNTL__DCE_H__
+
+#include "panel_cntl.h"
+
+/* set register offset with instance */
+#define DCE_PANEL_CNTL_SR(reg_name, block)\
+	.reg_name = mm ## block ## _ ## reg_name
+
+#define DCE_PANEL_CNTL_REG_LIST()\
+	DCE_PANEL_CNTL_SR(PWRSEQ_CNTL, LVTMA), \
+	DCE_PANEL_CNTL_SR(PWRSEQ_STATE, LVTMA), \
+	SR(BL_PWM_CNTL), \
+	SR(BL_PWM_CNTL2), \
+	SR(BL_PWM_PERIOD_CNTL), \
+	SR(BL_PWM_GRP1_REG_LOCK)
+
+#define DCN_PANEL_CNTL_SR(reg_name, block)\
+	.reg_name = BASE(mm ## block ## _ ## reg_name ## _BASE_IDX) + \
+					mm ## block ## _ ## reg_name
+
+#define DCN_PANEL_CNTL_REG_LIST()\
+	DCN_PANEL_CNTL_SR(PWRSEQ_CNTL, LVTMA), \
+	DCN_PANEL_CNTL_SR(PWRSEQ_STATE, LVTMA), \
+	SR(BL_PWM_CNTL), \
+	SR(BL_PWM_CNTL2), \
+	SR(BL_PWM_PERIOD_CNTL), \
+	SR(BL_PWM_GRP1_REG_LOCK)
+
+#define DCE_PANEL_CNTL_SF(block, reg_name, field_name, post_fix)\
+	.field_name = block ## reg_name ## __ ## block ## field_name ## post_fix
+
+#define DCE_PANEL_CNTL_MASK_SH_LIST(mask_sh) \
+	DCE_PANEL_CNTL_SF(LVTMA_, PWRSEQ_CNTL, BLON, mask_sh),\
+	DCE_PANEL_CNTL_SF(LVTMA_, PWRSEQ_CNTL, DIGON, mask_sh),\
+	DCE_PANEL_CNTL_SF(LVTMA_, PWRSEQ_CNTL, DIGON_OVRD, mask_sh),\
+	DCE_PANEL_CNTL_SF(LVTMA_, PWRSEQ_STATE, PWRSEQ_TARGET_STATE_R, mask_sh), \
+	DCE_PANEL_CNTL_SF(, BL_PWM_PERIOD_CNTL, BL_PWM_PERIOD, mask_sh), \
+	DCE_PANEL_CNTL_SF(, BL_PWM_PERIOD_CNTL, BL_PWM_PERIOD_BITCNT, mask_sh), \
+	DCE_PANEL_CNTL_SF(, BL_PWM_CNTL, BL_ACTIVE_INT_FRAC_CNT, mask_sh), \
+	DCE_PANEL_CNTL_SF(, BL_PWM_CNTL, BL_PWM_FRACTIONAL_EN, mask_sh), \
+	DCE_PANEL_CNTL_SF(, BL_PWM_CNTL, BL_PWM_EN, mask_sh), \
+	DCE_PANEL_CNTL_SF(, BL_PWM_GRP1_REG_LOCK, BL_PWM_GRP1_IGNORE_MASTER_LOCK_EN, mask_sh), \
+	DCE_PANEL_CNTL_SF(, BL_PWM_GRP1_REG_LOCK, BL_PWM_GRP1_REG_LOCK, mask_sh), \
+	DCE_PANEL_CNTL_SF(, BL_PWM_GRP1_REG_LOCK, BL_PWM_GRP1_REG_UPDATE_PENDING, mask_sh)
+
+#define DCE_PANEL_CNTL_REG_FIELD_LIST(type) \
+	type BLON;\
+	type DIGON;\
+	type DIGON_OVRD;\
+	type PWRSEQ_TARGET_STATE_R; \
+	type BL_PWM_EN; \
+	type BL_ACTIVE_INT_FRAC_CNT; \
+	type BL_PWM_FRACTIONAL_EN; \
+	type BL_PWM_PERIOD; \
+	type BL_PWM_PERIOD_BITCNT; \
+	type BL_PWM_GRP1_IGNORE_MASTER_LOCK_EN; \
+	type BL_PWM_GRP1_REG_LOCK; \
+	type BL_PWM_GRP1_REG_UPDATE_PENDING
+
+struct dce_panel_cntl_shift {
+	DCE_PANEL_CNTL_REG_FIELD_LIST(uint8_t);
+};
+
+struct dce_panel_cntl_mask {
+	DCE_PANEL_CNTL_REG_FIELD_LIST(uint32_t);
+};
+
+struct dce_panel_cntl_registers {
+	uint32_t PWRSEQ_CNTL;
+	uint32_t PWRSEQ_STATE;
+	uint32_t BL_PWM_CNTL;
+	uint32_t BL_PWM_CNTL2;
+	uint32_t BL_PWM_PERIOD_CNTL;
+	uint32_t BL_PWM_GRP1_REG_LOCK;
+};
+
+struct dce_panel_cntl {
+	struct panel_cntl base;
+	const struct dce_panel_cntl_registers *regs;
+	const struct dce_panel_cntl_shift *shift;
+	const struct dce_panel_cntl_mask *mask;
+};
+
+void dce_panel_cntl_construct(
+	struct dce_panel_cntl *panel_cntl,
+	const struct panel_cntl_init_data *init_data,
+	const struct dce_panel_cntl_registers *regs,
+	const struct dce_panel_cntl_shift *shift,
+	const struct dce_panel_cntl_mask *mask);
+
+#endif /* __DC_PANEL_CNTL__DCE_H__ */
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dmub_abm.c b/drivers/gpu/drm/amd/display/dc/dce/dmub_abm.c
new file mode 100644
index 000000000000..06d39d529c09
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dce/dmub_abm.c
@@ -0,0 +1,442 @@
+/*
+ * Copyright 2019 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "dmub_abm.h"
+#include "dce_abm.h"
+#include "dc.h"
+#include "dc_dmub_srv.h"
+#include "dmub/inc/dmub_srv.h"
+#include "core_types.h"
+#include "dm_services.h"
+#include "reg_helper.h"
+#include "fixed31_32.h"
+
+#include "atom.h"
+
+#define TO_DMUB_ABM(abm)\
+	container_of(abm, struct dce_abm, base)
+
+#define REG(reg) \
+	(dce_abm->regs->reg)
+
+#undef FN
+#define FN(reg_name, field_name) \
+	dce_abm->abm_shift->field_name, dce_abm->abm_mask->field_name
+
+#define CTX \
+	dce_abm->base.ctx
+
+#define DISABLE_ABM_IMMEDIATELY 255
+
+static bool dmub_abm_set_pipe(struct abm *abm, uint32_t otg_inst, uint32_t panel_inst)
+{
+	union dmub_rb_cmd cmd;
+	struct dc_context *dc = abm->ctx;
+	uint32_t ramping_boundary = 0xFFFF;
+
+	cmd.abm_set_pipe.header.type = DMUB_CMD__ABM;
+	cmd.abm_set_pipe.header.sub_type = DMUB_CMD__ABM_SET_PIPE;
+	cmd.abm_set_pipe.abm_set_pipe_data.otg_inst = otg_inst;
+	cmd.abm_set_pipe.abm_set_pipe_data.panel_inst = panel_inst;
+	cmd.abm_set_pipe.abm_set_pipe_data.ramping_boundary = ramping_boundary;
+	cmd.abm_set_pipe.header.payload_bytes = sizeof(struct dmub_cmd_abm_set_pipe_data);
+
+	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
+	dc_dmub_srv_cmd_execute(dc->dmub_srv);
+	dc_dmub_srv_wait_idle(dc->dmub_srv);
+
+	return true;
+}
+
+static unsigned int calculate_16_bit_backlight_from_pwm(struct dce_abm *dce_abm)
+{
+	uint64_t current_backlight;
+	uint32_t round_result;
+	uint32_t bl_period, bl_int_count;
+	uint32_t bl_pwm, fractional_duty_cycle_en;
+	uint32_t bl_period_mask, bl_pwm_mask;
+
+	REG_GET(BL_PWM_PERIOD_CNTL, BL_PWM_PERIOD, &bl_period);
+	REG_GET(BL_PWM_PERIOD_CNTL, BL_PWM_PERIOD_BITCNT, &bl_int_count);
+
+	REG_GET(BL_PWM_CNTL, BL_ACTIVE_INT_FRAC_CNT, &bl_pwm);
+	REG_GET(BL_PWM_CNTL, BL_PWM_FRACTIONAL_EN, &fractional_duty_cycle_en);
+
+	if (bl_int_count == 0)
+		bl_int_count = 16;
+
+	bl_period_mask = (1 << bl_int_count) - 1;
+	bl_period &= bl_period_mask;
+
+	bl_pwm_mask = bl_period_mask << (16 - bl_int_count);
+
+	if (fractional_duty_cycle_en == 0)
+		bl_pwm &= bl_pwm_mask;
+	else
+		bl_pwm &= 0xFFFF;
+
+	current_backlight = (uint64_t)bl_pwm << (1 + bl_int_count);
+
+	if (bl_period == 0)
+		bl_period = 0xFFFF;
+
+	current_backlight = div_u64(current_backlight, bl_period);
+	current_backlight = (current_backlight + 1) >> 1;
+
+	current_backlight = (uint64_t)(current_backlight) * bl_period;
+
+	round_result = (uint32_t)(current_backlight & 0xFFFFFFFF);
+
+	round_result = (round_result >> (bl_int_count-1)) & 1;
+
+	current_backlight >>= bl_int_count;
+	current_backlight += round_result;
+
+	return (uint32_t)(current_backlight);
+}
+
+static void dmcub_set_backlight_level(
+	struct dce_abm *dce_abm,
+	uint32_t backlight_pwm_u16_16,
+	uint32_t frame_ramp,
+	uint32_t otg_inst,
+	uint32_t panel_inst)
+{
+	union dmub_rb_cmd cmd;
+	struct dc_context *dc = dce_abm->base.ctx;
+	unsigned int backlight_8_bit = 0;
+	uint32_t s2;
+
+	if (backlight_pwm_u16_16 & 0x10000)
+		// Check for max backlight condition
+		backlight_8_bit = 0xFF;
+	else
+		// Take MSB of fractional part since backlight is not max
+		backlight_8_bit = (backlight_pwm_u16_16 >> 8) & 0xFF;
+
+	dmub_abm_set_pipe(&dce_abm->base, otg_inst, panel_inst);
+
+	REG_UPDATE(BL1_PWM_USER_LEVEL, BL1_PWM_USER_LEVEL, backlight_pwm_u16_16);
+
+	if (otg_inst == 0)
+		frame_ramp = 0;
+
+	cmd.abm_set_backlight.header.type = DMUB_CMD__ABM;
+	cmd.abm_set_backlight.header.sub_type = DMUB_CMD__ABM_SET_BACKLIGHT;
+	cmd.abm_set_backlight.abm_set_backlight_data.frame_ramp = frame_ramp;
+	cmd.abm_set_backlight.header.payload_bytes = sizeof(struct dmub_cmd_abm_set_backlight_data);
+
+	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
+	dc_dmub_srv_cmd_execute(dc->dmub_srv);
+	dc_dmub_srv_wait_idle(dc->dmub_srv);
+
+	// Update requested backlight level
+	s2 = REG_READ(BIOS_SCRATCH_2);
+
+	s2 &= ~ATOM_S2_CURRENT_BL_LEVEL_MASK;
+	backlight_8_bit &= (ATOM_S2_CURRENT_BL_LEVEL_MASK >>
+				ATOM_S2_CURRENT_BL_LEVEL_SHIFT);
+	s2 |= (backlight_8_bit << ATOM_S2_CURRENT_BL_LEVEL_SHIFT);
+
+	REG_WRITE(BIOS_SCRATCH_2, s2);
+}
+
+static void dmub_abm_enable_fractional_pwm(struct dc_context *dc)
+{
+	union dmub_rb_cmd cmd;
+	uint32_t fractional_pwm = (dc->dc->config.disable_fractional_pwm == false) ? 1 : 0;
+
+	cmd.abm_set_pwm_frac.header.type = DMUB_CMD__ABM;
+	cmd.abm_set_pwm_frac.header.sub_type = DMUB_CMD__ABM_SET_PWM_FRAC;
+	cmd.abm_set_pwm_frac.abm_set_pwm_frac_data.fractional_pwm = fractional_pwm;
+	cmd.abm_set_pwm_frac.header.payload_bytes = sizeof(struct dmub_cmd_abm_set_pwm_frac_data);
+
+	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
+	dc_dmub_srv_cmd_execute(dc->dmub_srv);
+	dc_dmub_srv_wait_idle(dc->dmub_srv);
+}
+
+static void dmub_abm_init(struct abm *abm)
+{
+	struct dce_abm *dce_abm = TO_DMUB_ABM(abm);
+	unsigned int backlight = calculate_16_bit_backlight_from_pwm(dce_abm);
+
+	REG_WRITE(DC_ABM1_HG_SAMPLE_RATE, 0x103);
+	REG_WRITE(DC_ABM1_HG_SAMPLE_RATE, 0x101);
+	REG_WRITE(DC_ABM1_LS_SAMPLE_RATE, 0x103);
+	REG_WRITE(DC_ABM1_LS_SAMPLE_RATE, 0x101);
+	REG_WRITE(BL1_PWM_BL_UPDATE_SAMPLE_RATE, 0x101);
+
+	REG_SET_3(DC_ABM1_HG_MISC_CTRL, 0,
+			ABM1_HG_NUM_OF_BINS_SEL, 0,
+			ABM1_HG_VMAX_SEL, 1,
+			ABM1_HG_BIN_BITWIDTH_SIZE_SEL, 0);
+
+	REG_SET_3(DC_ABM1_IPCSC_COEFF_SEL, 0,
+			ABM1_IPCSC_COEFF_SEL_R, 2,
+			ABM1_IPCSC_COEFF_SEL_G, 4,
+			ABM1_IPCSC_COEFF_SEL_B, 2);
+
+	REG_UPDATE(BL1_PWM_CURRENT_ABM_LEVEL,
+			BL1_PWM_CURRENT_ABM_LEVEL, backlight);
+
+	REG_UPDATE(BL1_PWM_TARGET_ABM_LEVEL,
+			BL1_PWM_TARGET_ABM_LEVEL, backlight);
+
+	REG_UPDATE(BL1_PWM_USER_LEVEL,
+			BL1_PWM_USER_LEVEL, backlight);
+
+	REG_UPDATE_2(DC_ABM1_LS_MIN_MAX_PIXEL_VALUE_THRES,
+			ABM1_LS_MIN_PIXEL_VALUE_THRES, 0,
+			ABM1_LS_MAX_PIXEL_VALUE_THRES, 1000);
+
+	REG_SET_3(DC_ABM1_HGLS_REG_READ_PROGRESS, 0,
+			ABM1_HG_REG_READ_MISSED_FRAME_CLEAR, 1,
+			ABM1_LS_REG_READ_MISSED_FRAME_CLEAR, 1,
+			ABM1_BL_REG_READ_MISSED_FRAME_CLEAR, 1);
+
+	dmub_abm_enable_fractional_pwm(abm->ctx);
+}
+
+static unsigned int dmub_abm_get_current_backlight(struct abm *abm)
+{
+	struct dce_abm *dce_abm = TO_DMUB_ABM(abm);
+	unsigned int backlight = REG_READ(BL1_PWM_CURRENT_ABM_LEVEL);
+
+	/* return backlight in hardware format which is unsigned 17 bits, with
+	 * 1 bit integer and 16 bit fractional
+	 */
+	return backlight;
+}
+
+static unsigned int dmub_abm_get_target_backlight(struct abm *abm)
+{
+	struct dce_abm *dce_abm = TO_DMUB_ABM(abm);
+	unsigned int backlight = REG_READ(BL1_PWM_TARGET_ABM_LEVEL);
+
+	/* return backlight in hardware format which is unsigned 17 bits, with
+	 * 1 bit integer and 16 bit fractional
+	 */
+	return backlight;
+}
+
+static bool dmub_abm_set_level(struct abm *abm, uint32_t level)
+{
+	union dmub_rb_cmd cmd;
+	struct dc_context *dc = abm->ctx;
+
+	cmd.abm_set_level.header.type = DMUB_CMD__ABM;
+	cmd.abm_set_level.header.sub_type = DMUB_CMD__ABM_SET_LEVEL;
+	cmd.abm_set_level.abm_set_level_data.level = level;
+	cmd.abm_set_level.header.payload_bytes = sizeof(struct dmub_cmd_abm_set_level_data);
+
+	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
+	dc_dmub_srv_cmd_execute(dc->dmub_srv);
+	dc_dmub_srv_wait_idle(dc->dmub_srv);
+
+	return true;
+}
+
+static bool dmub_abm_immediate_disable(struct abm *abm, uint32_t panel_inst)
+{
+	struct dce_abm *dce_abm = TO_DMUB_ABM(abm);
+
+	dmub_abm_set_pipe(abm, DISABLE_ABM_IMMEDIATELY, panel_inst);
+
+	abm->stored_backlight_registers.BL_PWM_CNTL =
+		REG_READ(BL_PWM_CNTL);
+	abm->stored_backlight_registers.BL_PWM_CNTL2 =
+		REG_READ(BL_PWM_CNTL2);
+	abm->stored_backlight_registers.BL_PWM_PERIOD_CNTL =
+		REG_READ(BL_PWM_PERIOD_CNTL);
+
+	REG_GET(LVTMA_PWRSEQ_REF_DIV, BL_PWM_REF_DIV,
+		&abm->stored_backlight_registers.LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV);
+
+	return true;
+}
+
+static bool dmub_abm_init_backlight(struct abm *abm)
+{
+	struct dce_abm *dce_abm = TO_DMUB_ABM(abm);
+	uint32_t value;
+
+	/* It must not be 0, so we have to restore them
+	 * Bios bug w/a - period resets to zero,
+	 * restoring to cache values which is always correct
+	 */
+	REG_GET(BL_PWM_CNTL, BL_ACTIVE_INT_FRAC_CNT, &value);
+
+	if (value == 0 || value == 1) {
+		if (abm->stored_backlight_registers.BL_PWM_CNTL != 0) {
+			REG_WRITE(BL_PWM_CNTL,
+				abm->stored_backlight_registers.BL_PWM_CNTL);
+			REG_WRITE(BL_PWM_CNTL2,
+				abm->stored_backlight_registers.BL_PWM_CNTL2);
+			REG_WRITE(BL_PWM_PERIOD_CNTL,
+				abm->stored_backlight_registers.BL_PWM_PERIOD_CNTL);
+			REG_UPDATE(LVTMA_PWRSEQ_REF_DIV,
+				BL_PWM_REF_DIV,
+				abm->stored_backlight_registers.LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV);
+		} else {
+			/* TODO: Note: This should not really happen since VBIOS
+			 * should have initialized PWM registers on boot.
+			 */
+			REG_WRITE(BL_PWM_CNTL, 0xC000FA00);
+			REG_WRITE(BL_PWM_PERIOD_CNTL, 0x000C0FA0);
+		}
+	} else {
+		abm->stored_backlight_registers.BL_PWM_CNTL =
+				REG_READ(BL_PWM_CNTL);
+		abm->stored_backlight_registers.BL_PWM_CNTL2 =
+				REG_READ(BL_PWM_CNTL2);
+		abm->stored_backlight_registers.BL_PWM_PERIOD_CNTL =
+				REG_READ(BL_PWM_PERIOD_CNTL);
+
+		REG_GET(LVTMA_PWRSEQ_REF_DIV, BL_PWM_REF_DIV,
+				&abm->stored_backlight_registers.LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV);
+	}
+
+	// Have driver take backlight control
+	// TakeBacklightControl(true)
+	value = REG_READ(BIOS_SCRATCH_2);
+	value |= ATOM_S2_VRI_BRIGHT_ENABLE;
+	REG_WRITE(BIOS_SCRATCH_2, value);
+
+	// Enable the backlight output
+	REG_UPDATE(BL_PWM_CNTL, BL_PWM_EN, 1);
+
+	// Unlock group 2 backlight registers
+	REG_UPDATE(BL_PWM_GRP1_REG_LOCK,
+			BL_PWM_GRP1_REG_LOCK, 0);
+
+	return true;
+}
+
+static bool dmub_abm_set_backlight_level_pwm(
+		struct abm *abm,
+		unsigned int backlight_pwm_u16_16,
+		unsigned int frame_ramp,
+		unsigned int otg_inst,
+		uint32_t panel_inst,
+		bool fw_set_brightness)
+{
+	struct dce_abm *dce_abm = TO_DMUB_ABM(abm);
+
+	dmcub_set_backlight_level(dce_abm,
+			backlight_pwm_u16_16,
+			frame_ramp,
+			otg_inst,
+			panel_inst);
+
+	return true;
+}
+
+static bool dmub_abm_init_config(struct abm *abm,
+	const char *src,
+	unsigned int bytes)
+{
+	union dmub_rb_cmd cmd;
+	struct dc_context *dc = abm->ctx;
+
+	// TODO: Optimize by only reading back final 4 bytes
+	dmub_flush_buffer_mem(&dc->dmub_srv->dmub->scratch_mem_fb);
+
+	// Copy iramtable into cw7
+	memcpy(dc->dmub_srv->dmub->scratch_mem_fb.cpu_addr, (void *)src, bytes);
+
+	// Fw will copy from cw7 to fw_state
+	cmd.abm_init_config.header.type = DMUB_CMD__ABM;
+	cmd.abm_init_config.header.sub_type = DMUB_CMD__ABM_INIT_CONFIG;
+	cmd.abm_init_config.abm_init_config_data.src.quad_part = dc->dmub_srv->dmub->scratch_mem_fb.gpu_addr;
+	cmd.abm_init_config.abm_init_config_data.bytes = bytes;
+	cmd.abm_init_config.header.payload_bytes = sizeof(struct dmub_cmd_abm_init_config_data);
+
+	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
+	dc_dmub_srv_cmd_execute(dc->dmub_srv);
+	dc_dmub_srv_wait_idle(dc->dmub_srv);
+
+	return true;
+}
+
+static const struct abm_funcs abm_funcs = {
+	.abm_init = dmub_abm_init,
+	.set_abm_level = dmub_abm_set_level,
+	.init_backlight = dmub_abm_init_backlight,
+	.set_pipe = dmub_abm_set_pipe,
+	.set_backlight_level_pwm = dmub_abm_set_backlight_level_pwm,
+	.get_current_backlight = dmub_abm_get_current_backlight,
+	.get_target_backlight = dmub_abm_get_target_backlight,
+	.set_abm_immediate_disable = dmub_abm_immediate_disable,
+	.init_abm_config = dmub_abm_init_config,
+};
+
+static void dmub_abm_construct(
+	struct dce_abm *abm_dce,
+	struct dc_context *ctx,
+	const struct dce_abm_registers *regs,
+	const struct dce_abm_shift *abm_shift,
+	const struct dce_abm_mask *abm_mask)
+{
+	struct abm *base = &abm_dce->base;
+
+	base->ctx = ctx;
+	base->funcs = &abm_funcs;
+	base->stored_backlight_registers.BL_PWM_CNTL = 0;
+	base->stored_backlight_registers.BL_PWM_CNTL2 = 0;
+	base->stored_backlight_registers.BL_PWM_PERIOD_CNTL = 0;
+	base->stored_backlight_registers.LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV = 0;
+	base->dmcu_is_running = false;
+
+	abm_dce->regs = regs;
+	abm_dce->abm_shift = abm_shift;
+	abm_dce->abm_mask = abm_mask;
+}
+
+struct abm *dmub_abm_create(
+	struct dc_context *ctx,
+	const struct dce_abm_registers *regs,
+	const struct dce_abm_shift *abm_shift,
+	const struct dce_abm_mask *abm_mask)
+{
+	struct dce_abm *abm_dce = kzalloc(sizeof(*abm_dce), GFP_KERNEL);
+
+	if (abm_dce == NULL) {
+		BREAK_TO_DEBUGGER();
+		return NULL;
+	}
+
+	dmub_abm_construct(abm_dce, ctx, regs, abm_shift, abm_mask);
+
+	return &abm_dce->base;
+}
+
+void dmub_abm_destroy(struct abm **abm)
+{
+	struct dce_abm *abm_dce = TO_DMUB_ABM(*abm);
+
+	kfree(abm_dce);
+	*abm = NULL;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dmub_abm.h b/drivers/gpu/drm/amd/display/dc/dce/dmub_abm.h
new file mode 100644
index 000000000000..3a5d5ac7a86e
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dce/dmub_abm.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2019 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __DMUB_ABM_H__
+#define __DMUB_ABM_H__
+
+#include "abm.h"
+#include "dce_abm.h"
+
+struct abm *dmub_abm_create(
+	struct dc_context *ctx,
+	const struct dce_abm_registers *regs,
+	const struct dce_abm_shift *abm_shift,
+	const struct dce_abm_mask *abm_mask);
+
+void dmub_abm_destroy(struct abm **abm);
+
+#endif
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c b/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c
index bc109d4fc6e6..9f12c76f21ab 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c
@@ -26,12 +26,51 @@
 #include "dmub_psr.h"
 #include "dc.h"
 #include "dc_dmub_srv.h"
-#include "../../dmub/inc/dmub_srv.h"
-#include "../../dmub/inc/dmub_gpint_cmd.h"
+#include "dmub/inc/dmub_srv.h"
+#include "dmub/inc/dmub_gpint_cmd.h"
 #include "core_types.h"
 
 #define MAX_PIPES 6
 
+/**
+ * Convert dmcub psr state to dmcu psr state.
+ */
+static void convert_psr_state(uint32_t *psr_state)
+{
+	if (*psr_state == 0)
+		*psr_state = 0;
+	else if (*psr_state == 0x10)
+		*psr_state = 1;
+	else if (*psr_state == 0x11)
+		*psr_state = 2;
+	else if (*psr_state == 0x20)
+		*psr_state = 3;
+	else if (*psr_state == 0x21)
+		*psr_state = 4;
+	else if (*psr_state == 0x30)
+		*psr_state = 5;
+	else if (*psr_state == 0x31)
+		*psr_state = 6;
+	else if (*psr_state == 0x40)
+		*psr_state = 7;
+	else if (*psr_state == 0x41)
+		*psr_state = 8;
+	else if (*psr_state == 0x42)
+		*psr_state = 9;
+	else if (*psr_state == 0x43)
+		*psr_state = 10;
+	else if (*psr_state == 0x44)
+		*psr_state = 11;
+	else if (*psr_state == 0x50)
+		*psr_state = 12;
+	else if (*psr_state == 0x51)
+		*psr_state = 13;
+	else if (*psr_state == 0x52)
+		*psr_state = 14;
+	else if (*psr_state == 0x53)
+		*psr_state = 15;
+}
+
 /**
  * Get PSR state from firmware.
  */
@@ -43,6 +82,8 @@ static void dmub_psr_get_state(struct dmub_psr *dmub, uint32_t *psr_state)
 	dmub_srv_send_gpint_command(srv, DMUB_GPINT__GET_PSR_STATE, 0, 30);
 
 	dmub_srv_get_gpint_response(srv, psr_state);
+
+	convert_psr_state(psr_state);
 }
 
 /**
@@ -53,19 +94,15 @@ static bool dmub_psr_set_version(struct dmub_psr *dmub, struct dc_stream_state *
 	union dmub_rb_cmd cmd;
 	struct dc_context *dc = dmub->ctx;
 
-	cmd.psr_set_version.header.type = DMUB_CMD__PSR;
-	cmd.psr_set_version.header.sub_type = DMUB_CMD__PSR_SET_VERSION;
-
-	if (stream->psr_version == 0x0) // Unsupported
+	if (stream->link->psr_settings.psr_version == PSR_VERSION_UNSUPPORTED)
 		return false;
-	else if (stream->psr_version == 0x1)
-		cmd.psr_set_version.psr_set_version_data.version = PSR_VERSION_1;
-	else if (stream->psr_version == 0x2)
-		cmd.psr_set_version.psr_set_version_data.version = PSR_VERSION_2;
 
-	cmd.psr_enable.header.payload_bytes = sizeof(struct dmub_cmd_psr_set_version_data);
+	cmd.psr_set_version.header.type = DMUB_CMD__PSR;
+	cmd.psr_set_version.header.sub_type = DMUB_CMD__PSR_SET_VERSION;
+	cmd.psr_set_version.psr_set_version_data.version = stream->link->psr_settings.psr_version;
+	cmd.psr_set_version.header.payload_bytes = sizeof(struct dmub_cmd_psr_set_version_data);
 
-	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd.psr_enable.header);
+	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
 	dc_dmub_srv_cmd_execute(dc->dmub_srv);
 	dc_dmub_srv_wait_idle(dc->dmub_srv);
 
@@ -89,7 +126,7 @@ static void dmub_psr_enable(struct dmub_psr *dmub, bool enable)
 
 	cmd.psr_enable.header.payload_bytes = 0; // Send header only
 
-	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd.psr_enable.header);
+	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
 	dc_dmub_srv_cmd_execute(dc->dmub_srv);
 	dc_dmub_srv_wait_idle(dc->dmub_srv);
 }
@@ -113,7 +150,7 @@ static void dmub_psr_set_level(struct dmub_psr *dmub, uint16_t psr_level)
 	cmd.psr_set_level.header.payload_bytes = sizeof(struct dmub_cmd_psr_set_level_data);
 	cmd.psr_set_level.psr_set_level_data.psr_level = psr_level;
 
-	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd.psr_set_level.header);
+	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
 	dc_dmub_srv_cmd_execute(dc->dmub_srv);
 	dc_dmub_srv_wait_idle(dc->dmub_srv);
 }
@@ -162,7 +199,7 @@ static bool dmub_psr_copy_settings(struct dmub_psr *dmub,
 	cmd.psr_copy_settings.header.payload_bytes = sizeof(struct dmub_cmd_psr_copy_settings_data);
 
 	// Hw insts
-	copy_settings_data->dpphy_inst				= psr_context->phyType;
+	copy_settings_data->dpphy_inst				= psr_context->transmitterId;
 	copy_settings_data->aux_inst				= psr_context->channel;
 	copy_settings_data->digfe_inst				= psr_context->engineId;
 	copy_settings_data->digbe_inst				= psr_context->transmitterId;
@@ -187,8 +224,10 @@ static bool dmub_psr_copy_settings(struct dmub_psr *dmub,
 	copy_settings_data->smu_optimizations_en		= psr_context->allow_smu_optimizations;
 	copy_settings_data->frame_delay				= psr_context->frame_delay;
 	copy_settings_data->frame_cap_ind			= psr_context->psrFrameCaptureIndicationReq;
+	copy_settings_data->debug.visual_confirm		= dc->dc->debug.visual_confirm == VISUAL_CONFIRM_PSR ?
+									true : false;
 
-	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd.psr_copy_settings.header);
+	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
 	dc_dmub_srv_cmd_execute(dc->dmub_srv);
 	dc_dmub_srv_wait_idle(dc->dmub_srv);
 
diff --git a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c
index 8f78bf9abbca..a28c4ae0f259 100644
--- a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c
@@ -46,6 +46,7 @@
 #include "dce/dce_audio.h"
 #include "dce/dce_hwseq.h"
 #include "dce100/dce100_hw_sequencer.h"
+#include "dce/dce_panel_cntl.h"
 
 #include "reg_helper.h"
 
@@ -249,6 +250,18 @@ static const struct dce_stream_encoder_mask se_mask = {
 		SE_COMMON_MASK_SH_LIST_DCE80_100(_MASK)
 };
 
+static const struct dce_panel_cntl_registers panel_cntl_regs[] = {
+	{ DCE_PANEL_CNTL_REG_LIST() }
+};
+
+static const struct dce_panel_cntl_shift panel_cntl_shift = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(__SHIFT)
+};
+
+static const struct dce_panel_cntl_mask panel_cntl_mask = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(_MASK)
+};
+
 #define opp_regs(id)\
 [id] = {\
 	OPP_DCE_100_REG_LIST(id),\
@@ -627,6 +640,23 @@ struct link_encoder *dce100_link_encoder_create(
 	return &enc110->base;
 }
 
+static struct panel_cntl *dce100_panel_cntl_create(const struct panel_cntl_init_data *init_data)
+{
+	struct dce_panel_cntl *panel_cntl =
+		kzalloc(sizeof(struct dce_panel_cntl), GFP_KERNEL);
+
+	if (!panel_cntl)
+		return NULL;
+
+	dce_panel_cntl_construct(panel_cntl,
+			init_data,
+			&panel_cntl_regs[init_data->inst],
+			&panel_cntl_shift,
+			&panel_cntl_mask);
+
+	return &panel_cntl->base;
+}
+
 struct output_pixel_processor *dce100_opp_create(
 	struct dc_context *ctx,
 	uint32_t inst)
@@ -943,6 +973,7 @@ struct stream_encoder *dce100_find_first_free_match_stream_enc_for_link(
 static const struct resource_funcs dce100_res_pool_funcs = {
 	.destroy = dce100_destroy_resource_pool,
 	.link_enc_create = dce100_link_encoder_create,
+	.panel_cntl_create = dce100_panel_cntl_create,
 	.validate_bandwidth = dce100_validate_bandwidth,
 	.validate_plane = dce100_validate_plane,
 	.add_stream_to_ctx = dce100_add_stream_to_ctx,
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index c279982947e1..6bd8d4e1c294 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -53,6 +53,7 @@
 #include "abm.h"
 #include "audio.h"
 #include "reg_helper.h"
+#include "panel_cntl.h"
 
 /* include DCE11 register header files */
 #include "dce/dce_11_0_d.h"
@@ -695,31 +696,6 @@ void dce110_enable_stream(struct pipe_ctx *pipe_ctx)
 
 
 
-}
-
-/*todo: cloned in stream enc, fix*/
-bool dce110_is_panel_backlight_on(struct dc_link *link)
-{
-	struct dc_context *ctx = link->ctx;
-	struct dce_hwseq *hws = ctx->dc->hwseq;
-	uint32_t value;
-
-	REG_GET(LVTMA_PWRSEQ_CNTL, LVTMA_BLON, &value);
-
-	return value;
-}
-
-bool dce110_is_panel_powered_on(struct dc_link *link)
-{
-	struct dc_context *ctx = link->ctx;
-	struct dce_hwseq *hws = ctx->dc->hwseq;
-	uint32_t pwr_seq_state, dig_on, dig_on_ovrd;
-
-	REG_GET(LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, &pwr_seq_state);
-
-	REG_GET_2(LVTMA_PWRSEQ_CNTL, LVTMA_DIGON, &dig_on, LVTMA_DIGON_OVRD, &dig_on_ovrd);
-
-	return (pwr_seq_state == 1) || (dig_on == 1 && dig_on_ovrd == 1);
 }
 
 static enum bp_result link_transmitter_control(
@@ -810,7 +786,6 @@ void dce110_edp_power_control(
 		bool power_up)
 {
 	struct dc_context *ctx = link->ctx;
-	struct dce_hwseq *hwseq = ctx->dc->hwseq;
 	struct bp_transmitter_control cntl = { 0 };
 	enum bp_result bp_result;
 
@@ -821,7 +796,11 @@ void dce110_edp_power_control(
 		return;
 	}
 
-	if (power_up != hwseq->funcs.is_panel_powered_on(link)) {
+	if (!link->panel_cntl)
+		return;
+
+	if (power_up !=
+		link->panel_cntl->funcs->is_panel_powered_on(link->panel_cntl)) {
 		/* Send VBIOS command to prompt eDP panel power */
 		if (power_up) {
 			unsigned long long current_ts = dm_get_timestamp(ctx);
@@ -892,7 +871,6 @@ void dce110_edp_backlight_control(
 		bool enable)
 {
 	struct dc_context *ctx = link->ctx;
-	struct dce_hwseq *hws = ctx->dc->hwseq;
 	struct bp_transmitter_control cntl = { 0 };
 
 	if (dal_graphics_object_id_get_connector_id(link->link_enc->connector)
@@ -901,7 +879,8 @@ void dce110_edp_backlight_control(
 		return;
 	}
 
-	if (enable && hws->funcs.is_panel_backlight_on(link)) {
+	if (enable && link->panel_cntl &&
+		link->panel_cntl->funcs->is_panel_backlight_on(link->panel_cntl)) {
 		DC_LOG_HW_RESUME_S3(
 				"%s: panel already powered up. Do nothing.\n",
 				__func__);
@@ -1432,7 +1411,7 @@ static enum dc_status apply_single_controller_ctx_to_hw(
 
 	pipe_ctx->plane_res.scl_data.lb_params.alpha_en = pipe_ctx->bottom_pipe != 0;
 
-	pipe_ctx->stream->link->psr_feature_enabled = false;
+	pipe_ctx->stream->link->psr_settings.psr_feature_enabled = false;
 
 	return DC_OK;
 }
@@ -1838,7 +1817,7 @@ static bool should_enable_fbc(struct dc *dc,
 		return false;
 
 	/* PSR should not be enabled */
-	if (pipe_ctx->stream->link->psr_feature_enabled)
+	if (pipe_ctx->stream->link->psr_settings.psr_feature_enabled)
 		return false;
 
 	/* Nothing to compress */
@@ -2735,6 +2714,37 @@ void dce110_set_cursor_attribute(struct pipe_ctx *pipe_ctx)
 				pipe_ctx->plane_res.xfm, attributes);
 }
 
+bool dce110_set_backlight_level(struct pipe_ctx *pipe_ctx,
+		uint32_t backlight_pwm_u16_16,
+		uint32_t frame_ramp)
+{
+	struct dc_link *link = pipe_ctx->stream->link;
+	struct dc  *dc = link->ctx->dc;
+	struct abm *abm = pipe_ctx->stream_res.abm;
+	struct dmcu *dmcu = dc->res_pool->dmcu;
+	bool fw_set_brightness = true;
+	/* DMCU -1 for all controller id values,
+	 * therefore +1 here
+	 */
+	uint32_t controller_id = pipe_ctx->stream_res.tg->inst + 1;
+
+	if (abm == NULL || (abm->funcs->set_backlight_level_pwm == NULL))
+		return false;
+
+	if (dmcu)
+		fw_set_brightness = dmcu->funcs->is_dmcu_initialized(dmcu);
+
+	abm->funcs->set_backlight_level_pwm(
+			abm,
+			backlight_pwm_u16_16,
+			frame_ramp,
+			controller_id,
+			link->panel_cntl->inst,
+			fw_set_brightness);
+
+	return true;
+}
+
 static const struct hw_sequencer_funcs dce110_funcs = {
 	.program_gamut_remap = program_gamut_remap,
 	.program_output_csc = program_output_csc,
@@ -2757,6 +2767,7 @@ static const struct hw_sequencer_funcs dce110_funcs = {
 	.disable_plane = dce110_power_down_fe,
 	.pipe_control_lock = dce_pipe_control_lock,
 	.interdependent_update_lock = NULL,
+	.cursor_lock = dce_pipe_control_lock,
 	.prepare_bandwidth = dce110_prepare_bandwidth,
 	.optimize_bandwidth = dce110_optimize_bandwidth,
 	.set_drr = set_drr,
@@ -2768,7 +2779,8 @@ static const struct hw_sequencer_funcs dce110_funcs = {
 	.edp_power_control = dce110_edp_power_control,
 	.edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready,
 	.set_cursor_position = dce110_set_cursor_position,
-	.set_cursor_attribute = dce110_set_cursor_attribute
+	.set_cursor_attribute = dce110_set_cursor_attribute,
+	.set_backlight_level = dce110_set_backlight_level,
 };
 
 static const struct hwseq_private_funcs dce110_private_funcs = {
@@ -2784,8 +2796,6 @@ static const struct hwseq_private_funcs dce110_private_funcs = {
 	.disable_stream_gating = NULL,
 	.enable_stream_gating = NULL,
 	.edp_backlight_control = dce110_edp_backlight_control,
-	.is_panel_backlight_on = dce110_is_panel_backlight_on,
-	.is_panel_powered_on = dce110_is_panel_powered_on,
 };
 
 void dce110_hw_sequencer_construct(struct dc *dc)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.h
index 34be166e8ff0..e609a72b4634 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.h
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.h
@@ -85,9 +85,9 @@ void dce110_edp_wait_for_hpd_ready(
 		struct dc_link *link,
 		bool power_up);
 
-bool dce110_is_panel_backlight_on(struct dc_link *link);
-
-bool dce110_is_panel_powered_on(struct dc_link *link);
+bool dce110_set_backlight_level(struct pipe_ctx *pipe_ctx,
+		uint32_t backlight_pwm_u16_16,
+		uint32_t frame_ramp);
 
 #endif /* __DC_HWSS_DCE110_H__ */
 
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_opp_csc_v.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_opp_csc_v.c
index 4245e1f818a3..e096d2b95ef9 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_opp_csc_v.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_opp_csc_v.c
@@ -679,8 +679,7 @@ void dce110_opp_v_set_csc_default(
 	if (default_adjust->force_hw_default == false) {
 		const struct out_csc_color_matrix *elm;
 		/* currently parameter not in use */
-		enum grph_color_adjust_option option =
-			GRPH_COLOR_MATRIX_HW_DEFAULT;
+		enum grph_color_adjust_option option;
 		uint32_t i;
 		/*
 		 * HW default false we program locally defined matrix
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c
index bf14e9ab040c..9597fc79d7fa 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c
@@ -53,6 +53,7 @@
 #include "dce/dce_abm.h"
 #include "dce/dce_dmcu.h"
 #include "dce/dce_i2c.h"
+#include "dce/dce_panel_cntl.h"
 
 #define DC_LOGGER \
 		dc->ctx->logger
@@ -275,6 +276,18 @@ static const struct dce_stream_encoder_mask se_mask = {
 		SE_COMMON_MASK_SH_LIST_DCE110(_MASK)
 };
 
+static const struct dce_panel_cntl_registers panel_cntl_regs[] = {
+	{ DCE_PANEL_CNTL_REG_LIST() }
+};
+
+static const struct dce_panel_cntl_shift panel_cntl_shift = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(__SHIFT)
+};
+
+static const struct dce_panel_cntl_mask panel_cntl_mask = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(_MASK)
+};
+
 static const struct dce110_aux_registers_shift aux_shift = {
 	DCE_AUX_MASK_SH_LIST(__SHIFT)
 };
@@ -673,6 +686,23 @@ static struct link_encoder *dce110_link_encoder_create(
 	return &enc110->base;
 }
 
+static struct panel_cntl *dce110_panel_cntl_create(const struct panel_cntl_init_data *init_data)
+{
+	struct dce_panel_cntl *panel_cntl =
+		kzalloc(sizeof(struct dce_panel_cntl), GFP_KERNEL);
+
+	if (!panel_cntl)
+		return NULL;
+
+	dce_panel_cntl_construct(panel_cntl,
+			init_data,
+			&panel_cntl_regs[init_data->inst],
+			&panel_cntl_shift,
+			&panel_cntl_mask);
+
+	return &panel_cntl->base;
+}
+
 static struct output_pixel_processor *dce110_opp_create(
 	struct dc_context *ctx,
 	uint32_t inst)
@@ -1203,6 +1233,7 @@ struct stream_encoder *dce110_find_first_free_match_stream_enc_for_link(
 static const struct resource_funcs dce110_res_pool_funcs = {
 	.destroy = dce110_destroy_resource_pool,
 	.link_enc_create = dce110_link_encoder_create,
+	.panel_cntl_create = dce110_panel_cntl_create,
 	.validate_bandwidth = dce110_validate_bandwidth,
 	.validate_plane = dce110_validate_plane,
 	.acquire_idle_pipe_for_layer = dce110_acquire_underlay,
diff --git a/drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c b/drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c
index 700ad8b3e54b..4a7796de2ff5 100644
--- a/drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c
@@ -51,6 +51,7 @@
 #include "dce/dce_dmcu.h"
 #include "dce/dce_aux.h"
 #include "dce/dce_i2c.h"
+#include "dce/dce_panel_cntl.h"
 
 #include "reg_helper.h"
 
@@ -238,6 +239,18 @@ static const struct dce110_link_enc_aux_registers link_enc_aux_regs[] = {
 		aux_regs(5)
 };
 
+static const struct dce_panel_cntl_registers panel_cntl_regs[] = {
+	{ DCE_PANEL_CNTL_REG_LIST() }
+};
+
+static const struct dce_panel_cntl_shift panel_cntl_shift = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(__SHIFT)
+};
+
+static const struct dce_panel_cntl_mask panel_cntl_mask = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(_MASK)
+};
+
 #define hpd_regs(id)\
 [id] = {\
 	HPD_REG_LIST(id)\
@@ -631,6 +644,23 @@ struct link_encoder *dce112_link_encoder_create(
 	return &enc110->base;
 }
 
+static struct panel_cntl *dce112_panel_cntl_create(const struct panel_cntl_init_data *init_data)
+{
+	struct dce_panel_cntl *panel_cntl =
+		kzalloc(sizeof(struct dce_panel_cntl), GFP_KERNEL);
+
+	if (!panel_cntl)
+		return NULL;
+
+	dce_panel_cntl_construct(panel_cntl,
+			init_data,
+			&panel_cntl_regs[init_data->inst],
+			&panel_cntl_shift,
+			&panel_cntl_mask);
+
+	return &panel_cntl->base;
+}
+
 static struct input_pixel_processor *dce112_ipp_create(
 	struct dc_context *ctx, uint32_t inst)
 {
@@ -1021,6 +1051,7 @@ static void dce112_destroy_resource_pool(struct resource_pool **pool)
 static const struct resource_funcs dce112_res_pool_funcs = {
 	.destroy = dce112_destroy_resource_pool,
 	.link_enc_create = dce112_link_encoder_create,
+	.panel_cntl_create = dce112_panel_cntl_create,
 	.validate_bandwidth = dce112_validate_bandwidth,
 	.validate_plane = dce100_validate_plane,
 	.add_stream_to_ctx = dce112_add_stream_to_ctx,
diff --git a/drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c b/drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c
index 53ab88ef71f5..9a9764cbd78d 100644
--- a/drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c
@@ -44,6 +44,7 @@
 #include "dce/dce_clock_source.h"
 #include "dce/dce_ipp.h"
 #include "dce/dce_mem_input.h"
+#include "dce/dce_panel_cntl.h"
 
 #include "dce110/dce110_hw_sequencer.h"
 #include "dce120/dce120_hw_sequencer.h"
@@ -293,6 +294,18 @@ static const struct dce_stream_encoder_mask se_mask = {
 		SE_COMMON_MASK_SH_LIST_DCE120(_MASK)
 };
 
+static const struct dce_panel_cntl_registers panel_cntl_regs[] = {
+	{ DCE_PANEL_CNTL_REG_LIST() }
+};
+
+static const struct dce_panel_cntl_shift panel_cntl_shift = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(__SHIFT)
+};
+
+static const struct dce_panel_cntl_mask panel_cntl_mask = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(_MASK)
+};
+
 static const struct dce110_aux_registers_shift aux_shift = {
 	DCE12_AUX_MASK_SH_LIST(__SHIFT)
 };
@@ -715,6 +728,23 @@ static struct link_encoder *dce120_link_encoder_create(
 	return &enc110->base;
 }
 
+static struct panel_cntl *dce120_panel_cntl_create(const struct panel_cntl_init_data *init_data)
+{
+	struct dce_panel_cntl *panel_cntl =
+		kzalloc(sizeof(struct dce_panel_cntl), GFP_KERNEL);
+
+	if (!panel_cntl)
+		return NULL;
+
+	dce_panel_cntl_construct(panel_cntl,
+			init_data,
+			&panel_cntl_regs[init_data->inst],
+			&panel_cntl_shift,
+			&panel_cntl_mask);
+
+	return &panel_cntl->base;
+}
+
 static struct input_pixel_processor *dce120_ipp_create(
 	struct dc_context *ctx, uint32_t inst)
 {
@@ -880,6 +910,7 @@ static void dce120_destroy_resource_pool(struct resource_pool **pool)
 static const struct resource_funcs dce120_res_pool_funcs = {
 	.destroy = dce120_destroy_resource_pool,
 	.link_enc_create = dce120_link_encoder_create,
+	.panel_cntl_create = dce120_panel_cntl_create,
 	.validate_bandwidth = dce112_validate_bandwidth,
 	.validate_plane = dce100_validate_plane,
 	.add_stream_to_ctx = dce112_add_stream_to_ctx,
diff --git a/drivers/gpu/drm/amd/display/dc/dce80/dce80_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce80/dce80_hw_sequencer.c
index 893261c81854..d2ceebdbdf51 100644
--- a/drivers/gpu/drm/amd/display/dc/dce80/dce80_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce80/dce80_hw_sequencer.c
@@ -36,34 +36,6 @@
 #include "dce/dce_8_0_d.h"
 #include "dce/dce_8_0_sh_mask.h"
 
-struct dce80_hw_seq_reg_offsets {
-	uint32_t crtc;
-};
-
-static const struct dce80_hw_seq_reg_offsets reg_offsets[] = {
-{
-	.crtc = (mmCRTC0_CRTC_GSL_CONTROL - mmCRTC_GSL_CONTROL),
-},
-{
-	.crtc = (mmCRTC1_CRTC_GSL_CONTROL - mmCRTC_GSL_CONTROL),
-},
-{
-	.crtc = (mmCRTC2_CRTC_GSL_CONTROL - mmCRTC_GSL_CONTROL),
-},
-{
-	.crtc = (mmCRTC3_CRTC_GSL_CONTROL - mmCRTC_GSL_CONTROL),
-},
-{
-	.crtc = (mmCRTC4_CRTC_GSL_CONTROL - mmCRTC_GSL_CONTROL),
-},
-{
-	.crtc = (mmCRTC5_CRTC_GSL_CONTROL - mmCRTC_GSL_CONTROL),
-}
-};
-
-#define HW_REG_CRTC(reg, id)\
-	(reg + reg_offsets[id].crtc)
-
 /*******************************************************************************
  * Private definitions
  ******************************************************************************/
diff --git a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
index 2ad5c28c6e66..a19be9de2df7 100644
--- a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
@@ -50,6 +50,7 @@
 #include "dce/dce_hwseq.h"
 #include "dce80/dce80_hw_sequencer.h"
 #include "dce100/dce100_resource.h"
+#include "dce/dce_panel_cntl.h"
 
 #include "reg_helper.h"
 
@@ -266,6 +267,18 @@ static const struct dce_stream_encoder_mask se_mask = {
 		SE_COMMON_MASK_SH_LIST_DCE80_100(_MASK)
 };
 
+static const struct dce_panel_cntl_registers panel_cntl_regs[] = {
+	{ DCE_PANEL_CNTL_REG_LIST() }
+};
+
+static const struct dce_panel_cntl_shift panel_cntl_shift = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(__SHIFT)
+};
+
+static const struct dce_panel_cntl_mask panel_cntl_mask = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(_MASK)
+};
+
 #define opp_regs(id)\
 [id] = {\
 	OPP_DCE_80_REG_LIST(id),\
@@ -728,6 +741,23 @@ struct link_encoder *dce80_link_encoder_create(
 	return &enc110->base;
 }
 
+static struct panel_cntl *dce80_panel_cntl_create(const struct panel_cntl_init_data *init_data)
+{
+	struct dce_panel_cntl *panel_cntl =
+		kzalloc(sizeof(struct dce_panel_cntl), GFP_KERNEL);
+
+	if (!panel_cntl)
+		return NULL;
+
+	dce_panel_cntl_construct(panel_cntl,
+			init_data,
+			&panel_cntl_regs[init_data->inst],
+			&panel_cntl_shift,
+			&panel_cntl_mask);
+
+	return &panel_cntl->base;
+}
+
 struct clock_source *dce80_clock_source_create(
 	struct dc_context *ctx,
 	struct dc_bios *bios,
@@ -909,6 +939,7 @@ static void dce80_destroy_resource_pool(struct resource_pool **pool)
 static const struct resource_funcs dce80_res_pool_funcs = {
 	.destroy = dce80_destroy_resource_pool,
 	.link_enc_create = dce80_link_encoder_create,
+	.panel_cntl_create = dce80_panel_cntl_create,
 	.validate_bandwidth = dce80_validate_bandwidth,
 	.validate_plane = dce100_validate_plane,
 	.add_stream_to_ctx = dce100_add_stream_to_ctx,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.c
index 31b64733d693..319366ebb44f 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.c
@@ -1139,6 +1139,8 @@ void hubp1_cursor_set_position(
 	int src_y_offset = pos->y - pos->y_hotspot - param->viewport.y;
 	int x_hotspot = pos->x_hotspot;
 	int y_hotspot = pos->y_hotspot;
+	int cursor_height = (int)hubp->curs_attr.height;
+	int cursor_width = (int)hubp->curs_attr.width;
 	uint32_t dst_x_offset;
 	uint32_t cur_en = pos->enable ? 1 : 0;
 
@@ -1152,10 +1154,16 @@ void hubp1_cursor_set_position(
 	if (hubp->curs_attr.address.quad_part == 0)
 		return;
 
+	// Rotated cursor width/height and hotspots tweaks for offset calculation
 	if (param->rotation == ROTATION_ANGLE_90 || param->rotation == ROTATION_ANGLE_270) {
-		src_x_offset = pos->y - pos->y_hotspot - param->viewport.x;
-		y_hotspot = pos->x_hotspot;
-		x_hotspot = pos->y_hotspot;
+		swap(cursor_height, cursor_width);
+		if (param->rotation == ROTATION_ANGLE_90) {
+			src_x_offset = pos->x - pos->y_hotspot - param->viewport.x;
+			src_y_offset = pos->y - pos->x_hotspot - param->viewport.y;
+		}
+	} else if (param->rotation == ROTATION_ANGLE_180) {
+		src_x_offset = pos->x - param->viewport.x;
+		src_y_offset = pos->y - param->viewport.y;
 	}
 
 	if (param->mirror) {
@@ -1177,13 +1185,13 @@ void hubp1_cursor_set_position(
 	if (src_x_offset >= (int)param->viewport.width)
 		cur_en = 0;  /* not visible beyond right edge*/
 
-	if (src_x_offset + (int)hubp->curs_attr.width <= 0)
+	if (src_x_offset + cursor_width <= 0)
 		cur_en = 0;  /* not visible beyond left edge*/
 
 	if (src_y_offset >= (int)param->viewport.height)
 		cur_en = 0;  /* not visible beyond bottom edge*/
 
-	if (src_y_offset + (int)hubp->curs_attr.height <= 0)
+	if (src_y_offset + cursor_height <= 0)
 		cur_en = 0;  /* not visible beyond top edge*/
 
 	if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index b0357546471b..2eb5d0e3e425 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -903,7 +903,8 @@ static void dcn10_reset_back_end_for_pipe(
 	if (pipe_ctx->top_pipe == NULL) {
 
 		if (pipe_ctx->stream_res.abm)
-			pipe_ctx->stream_res.abm->funcs->set_abm_immediate_disable(pipe_ctx->stream_res.abm);
+			pipe_ctx->stream_res.abm->funcs->set_abm_immediate_disable(pipe_ctx->stream_res.abm,
+					pipe_ctx->stream->link->panel_cntl->inst);
 
 		pipe_ctx->stream_res.tg->funcs->disable_crtc(pipe_ctx->stream_res.tg);
 
@@ -1238,7 +1239,7 @@ void dcn10_init_pipes(struct dc *dc, struct dc_state *context)
 
 void dcn10_init_hw(struct dc *dc)
 {
-	int i;
+	int i, j;
 	struct abm *abm = dc->res_pool->abm;
 	struct dmcu *dmcu = dc->res_pool->dmcu;
 	struct dce_hwseq *hws = dc->hwseq;
@@ -1333,17 +1334,28 @@ void dcn10_init_hw(struct dc *dc)
 				continue;
 
 			/*
-			 * core_link_read_dpcd() will invoke dm_helpers_dp_read_dpcd(),
-			 * which needs to read dpcd info with the help of aconnector.
-			 * If aconnector (dc->links[i]->prev) is NULL, then dpcd status
-			 * cannot be read.
+			 * If any of the displays are lit up turn them off.
+			 * The reason is that some MST hubs cannot be turned off
+			 * completely until we tell them to do so.
+			 * If not turned off, then displays connected to MST hub
+			 * won't light up.
 			 */
-			if (dc->links[i]->priv) {
-				/* if any of the displays are lit up turn them off */
-				status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
-								&dpcd_power_state, sizeof(dpcd_power_state));
-				if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0)
-					dp_receiver_power_ctrl(dc->links[i], false);
+			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+							&dpcd_power_state, sizeof(dpcd_power_state));
+			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+				/* blank dp stream before power off receiver*/
+				if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
+					unsigned int fe = dc->links[i]->link_enc->funcs->get_dig_frontend(dc->links[i]->link_enc);
+
+					for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+						if (fe == dc->res_pool->stream_enc[j]->id) {
+							dc->res_pool->stream_enc[j]->funcs->dp_blank(
+										dc->res_pool->stream_enc[j]);
+							break;
+						}
+					}
+				}
+				dp_receiver_power_ctrl(dc->links[i], false);
 			}
 		}
 	}
@@ -1361,6 +1373,38 @@ void dcn10_init_hw(struct dc *dc)
 					!dc->res_pool->hubbub->ctx->dc->debug.disable_stutter);
 	}
 
+	/* In headless boot cases, DIG may be turned
+	 * on which causes HW/SW discrepancies.
+	 * To avoid this, power down hardware on boot
+	 * if DIG is turned on and seamless boot not enabled
+	 */
+	if (dc->config.power_down_display_on_boot) {
+		struct dc_link *edp_link = get_edp_link(dc);
+
+		if (edp_link &&
+				edp_link->link_enc->funcs->is_dig_enabled &&
+				edp_link->link_enc->funcs->is_dig_enabled(edp_link->link_enc) &&
+				dc->hwss.edp_backlight_control &&
+				dc->hwss.power_down &&
+				dc->hwss.edp_power_control) {
+			dc->hwss.edp_backlight_control(edp_link, false);
+			dc->hwss.power_down(dc);
+			dc->hwss.edp_power_control(edp_link, false);
+		} else {
+			for (i = 0; i < dc->link_count; i++) {
+				struct dc_link *link = dc->links[i];
+
+				if (link->link_enc->funcs->is_dig_enabled &&
+						link->link_enc->funcs->is_dig_enabled(link->link_enc) &&
+						dc->hwss.power_down) {
+					dc->hwss.power_down(dc);
+					break;
+				}
+
+			}
+		}
+	}
+
 	for (i = 0; i < res_pool->audio_count; i++) {
 		struct audio *audio = res_pool->audios[i];
 
@@ -1625,6 +1669,16 @@ void dcn10_pipe_control_lock(
 		hws->funcs.verify_allow_pstate_change_high(dc);
 }
 
+void dcn10_cursor_lock(struct dc *dc, struct pipe_ctx *pipe, bool lock)
+{
+	/* cursor lock is per MPCC tree, so only need to lock one pipe per stream */
+	if (!pipe || pipe->top_pipe)
+		return;
+
+	dc->res_pool->mpc->funcs->cursor_lock(dc->res_pool->mpc,
+			pipe->stream_res.opp->inst, lock);
+}
+
 static bool wait_for_reset_trigger_to_occur(
 	struct dc_context *dc_ctx,
 	struct timing_generator *tg)
@@ -2085,25 +2139,25 @@ void dcn10_get_surface_visual_confirm_color(
 
 	switch (pipe_ctx->plane_res.scl_data.format) {
 	case PIXEL_FORMAT_ARGB8888:
-		/* set boarder color to red */
+		/* set border color to red */
 		color->color_r_cr = color_value;
 		break;
 
 	case PIXEL_FORMAT_ARGB2101010:
-		/* set boarder color to blue */
+		/* set border color to blue */
 		color->color_b_cb = color_value;
 		break;
 	case PIXEL_FORMAT_420BPP8:
-		/* set boarder color to green */
+		/* set border color to green */
 		color->color_g_y = color_value;
 		break;
 	case PIXEL_FORMAT_420BPP10:
-		/* set boarder color to yellow */
+		/* set border color to yellow */
 		color->color_g_y = color_value;
 		color->color_r_cr = color_value;
 		break;
 	case PIXEL_FORMAT_FP16:
-		/* set boarder color to white */
+		/* set border color to white */
 		color->color_r_cr = color_value;
 		color->color_b_cb = color_value;
 		color->color_g_y = color_value;
@@ -2128,25 +2182,25 @@ void dcn10_get_hdr_visual_confirm_color(
 	switch (top_pipe_ctx->plane_res.scl_data.format) {
 	case PIXEL_FORMAT_ARGB2101010:
 		if (top_pipe_ctx->stream->out_transfer_func->tf == TRANSFER_FUNCTION_PQ) {
-			/* HDR10, ARGB2101010 - set boarder color to red */
+			/* HDR10, ARGB2101010 - set border color to red */
 			color->color_r_cr = color_value;
 		} else if (top_pipe_ctx->stream->out_transfer_func->tf == TRANSFER_FUNCTION_GAMMA22) {
-			/* FreeSync 2 ARGB2101010 - set boarder color to pink */
+			/* FreeSync 2 ARGB2101010 - set border color to pink */
 			color->color_r_cr = color_value;
 			color->color_b_cb = color_value;
 		}
 		break;
 	case PIXEL_FORMAT_FP16:
 		if (top_pipe_ctx->stream->out_transfer_func->tf == TRANSFER_FUNCTION_PQ) {
-			/* HDR10, FP16 - set boarder color to blue */
+			/* HDR10, FP16 - set border color to blue */
 			color->color_b_cb = color_value;
 		} else if (top_pipe_ctx->stream->out_transfer_func->tf == TRANSFER_FUNCTION_GAMMA22) {
-			/* FreeSync 2 HDR - set boarder color to green */
+			/* FreeSync 2 HDR - set border color to green */
 			color->color_g_y = color_value;
 		}
 		break;
 	default:
-		/* SDR - set boarder color to Gray */
+		/* SDR - set border color to Gray */
 		color->color_r_cr = color_value/2;
 		color->color_b_cb = color_value/2;
 		color->color_g_y = color_value/2;
@@ -2431,12 +2485,14 @@ void dcn10_blank_pixel_data(
 		if (stream_res->tg->funcs->set_blank)
 			stream_res->tg->funcs->set_blank(stream_res->tg, blank);
 		if (stream_res->abm) {
-			stream_res->abm->funcs->set_pipe(stream_res->abm, stream_res->tg->inst + 1);
+			stream_res->abm->funcs->set_pipe(stream_res->abm, stream_res->tg->inst + 1,
+					stream->link->panel_cntl->inst);
 			stream_res->abm->funcs->set_abm_level(stream_res->abm, stream->abm_level);
 		}
 	} else if (blank) {
 		if (stream_res->abm)
-			stream_res->abm->funcs->set_abm_immediate_disable(stream_res->abm);
+			stream_res->abm->funcs->set_abm_immediate_disable(stream_res->abm,
+					stream->link->panel_cntl->inst);
 		if (stream_res->tg->funcs->set_blank)
 			stream_res->tg->funcs->set_blank(stream_res->tg, blank);
 	}
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h
index 16a50e05ffbf..af51424315d5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h
@@ -49,6 +49,7 @@ void dcn10_pipe_control_lock(
 	struct dc *dc,
 	struct pipe_ctx *pipe,
 	bool lock);
+void dcn10_cursor_lock(struct dc *dc, struct pipe_ctx *pipe, bool lock);
 void dcn10_blank_pixel_data(
 		struct dc *dc,
 		struct pipe_ctx *pipe_ctx,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_init.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_init.c
index dd02d3983695..6ff7e2bd1d4a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_init.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_init.c
@@ -50,6 +50,7 @@ static const struct hw_sequencer_funcs dcn10_funcs = {
 	.disable_audio_stream = dce110_disable_audio_stream,
 	.disable_plane = dcn10_disable_plane,
 	.pipe_control_lock = dcn10_pipe_control_lock,
+	.cursor_lock = dcn10_cursor_lock,
 	.interdependent_update_lock = dcn10_lock_all_pipes,
 	.prepare_bandwidth = dcn10_prepare_bandwidth,
 	.optimize_bandwidth = dcn10_optimize_bandwidth,
@@ -71,6 +72,7 @@ static const struct hw_sequencer_funcs dcn10_funcs = {
 	.set_clock = dcn10_set_clock,
 	.get_clock = dcn10_get_clock,
 	.get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
+	.set_backlight_level = dce110_set_backlight_level,
 };
 
 static const struct hwseq_private_funcs dcn10_private_funcs = {
@@ -87,8 +89,6 @@ static const struct hwseq_private_funcs dcn10_private_funcs = {
 	.reset_hw_ctx_wrap = dcn10_reset_hw_ctx_wrap,
 	.enable_stream_timing = dcn10_enable_stream_timing,
 	.edp_backlight_control = dce110_edp_backlight_control,
-	.is_panel_backlight_on = dce110_is_panel_backlight_on,
-	.is_panel_powered_on = dce110_is_panel_powered_on,
 	.disable_stream_gating = NULL,
 	.enable_stream_gating = NULL,
 	.setup_vupdate_interrupt = dcn10_setup_vupdate_interrupt,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c
index d3617d6785a7..7fd385be3f3d 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c
@@ -90,7 +90,8 @@ static const struct link_encoder_funcs dcn10_lnk_enc_funcs = {
 	.is_dig_enabled = dcn10_is_dig_enabled,
 	.get_dig_frontend = dcn10_get_dig_frontend,
 	.get_dig_mode = dcn10_get_dig_mode,
-	.destroy = dcn10_link_encoder_destroy
+	.destroy = dcn10_link_encoder_destroy,
+	.get_max_link_cap = dcn10_link_encoder_get_max_link_cap,
 };
 
 static enum bp_result link_transmitter_control(
@@ -1370,7 +1371,6 @@ void dcn10_link_encoder_disable_hpd(struct link_encoder *enc)
 			DC_HPD_EN, 0);
 }
 
-
 #define AUX_REG(reg)\
 	(enc10->aux_regs->reg)
 
@@ -1425,3 +1425,19 @@ enum signal_type dcn10_get_dig_mode(
 	return SIGNAL_TYPE_NONE;
 }
 
+void dcn10_link_encoder_get_max_link_cap(struct link_encoder *enc,
+	struct dc_link_settings *link_settings)
+{
+	/* Set Default link settings */
+	struct dc_link_settings max_link_cap = {LANE_COUNT_FOUR, LINK_RATE_HIGH,
+			LINK_SPREAD_05_DOWNSPREAD_30KHZ, false, 0};
+
+	/* Higher link settings based on feature supported */
+	if (enc->features.flags.bits.IS_HBR2_CAPABLE)
+		max_link_cap.link_rate = LINK_RATE_HIGH2;
+
+	if (enc->features.flags.bits.IS_HBR3_CAPABLE)
+		max_link_cap.link_rate = LINK_RATE_HIGH3;
+
+	*link_settings = max_link_cap;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h
index 762109174fb8..68395bcc24fd 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h
@@ -575,4 +575,7 @@ void dcn10_aux_initialize(struct dcn10_link_encoder *enc10);
 
 enum signal_type dcn10_get_dig_mode(
 	struct link_encoder *enc);
+
+void dcn10_link_encoder_get_max_link_cap(struct link_encoder *enc,
+	struct dc_link_settings *link_settings);
 #endif /* __DC_LINK_ENCODER__DCN10_H__ */
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c
index 04f863499cfb..3fcd408e9103 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c
@@ -223,6 +223,9 @@ struct mpcc *mpc1_insert_plane(
 	REG_SET(MPCC_TOP_SEL[mpcc_id], 0, MPCC_TOP_SEL, dpp_id);
 	REG_SET(MPCC_OPP_ID[mpcc_id], 0, MPCC_OPP_ID, tree->opp_id);
 
+	/* Configure VUPDATE lock set for this MPCC to map to the OPP */
+	REG_SET(MPCC_UPDATE_LOCK_SEL[mpcc_id], 0, MPCC_UPDATE_LOCK_SEL, tree->opp_id);
+
 	/* update mpc tree mux setting */
 	if (tree->opp_list == insert_above_mpcc) {
 		/* insert the toppest mpcc */
@@ -318,6 +321,7 @@ void mpc1_remove_mpcc(
 		REG_SET(MPCC_TOP_SEL[mpcc_id], 0, MPCC_TOP_SEL, 0xf);
 		REG_SET(MPCC_BOT_SEL[mpcc_id], 0, MPCC_BOT_SEL, 0xf);
 		REG_SET(MPCC_OPP_ID[mpcc_id],  0, MPCC_OPP_ID,  0xf);
+		REG_SET(MPCC_UPDATE_LOCK_SEL[mpcc_id], 0, MPCC_UPDATE_LOCK_SEL, 0xf);
 
 		/* mark this mpcc as not in use */
 		mpc10->mpcc_in_use_mask &= ~(1 << mpcc_id);
@@ -328,6 +332,7 @@ void mpc1_remove_mpcc(
 		REG_SET(MPCC_TOP_SEL[mpcc_id], 0, MPCC_TOP_SEL, 0xf);
 		REG_SET(MPCC_BOT_SEL[mpcc_id], 0, MPCC_BOT_SEL, 0xf);
 		REG_SET(MPCC_OPP_ID[mpcc_id],  0, MPCC_OPP_ID,  0xf);
+		REG_SET(MPCC_UPDATE_LOCK_SEL[mpcc_id], 0, MPCC_UPDATE_LOCK_SEL, 0xf);
 	}
 }
 
@@ -361,6 +366,7 @@ void mpc1_mpc_init(struct mpc *mpc)
 		REG_SET(MPCC_TOP_SEL[mpcc_id], 0, MPCC_TOP_SEL, 0xf);
 		REG_SET(MPCC_BOT_SEL[mpcc_id], 0, MPCC_BOT_SEL, 0xf);
 		REG_SET(MPCC_OPP_ID[mpcc_id],  0, MPCC_OPP_ID,  0xf);
+		REG_SET(MPCC_UPDATE_LOCK_SEL[mpcc_id], 0, MPCC_UPDATE_LOCK_SEL, 0xf);
 
 		mpc1_init_mpcc(&(mpc->mpcc_array[mpcc_id]), mpcc_id);
 	}
@@ -381,6 +387,7 @@ void mpc1_mpc_init_single_inst(struct mpc *mpc, unsigned int mpcc_id)
 	REG_SET(MPCC_TOP_SEL[mpcc_id], 0, MPCC_TOP_SEL, 0xf);
 	REG_SET(MPCC_BOT_SEL[mpcc_id], 0, MPCC_BOT_SEL, 0xf);
 	REG_SET(MPCC_OPP_ID[mpcc_id],  0, MPCC_OPP_ID,  0xf);
+	REG_SET(MPCC_UPDATE_LOCK_SEL[mpcc_id], 0, MPCC_UPDATE_LOCK_SEL, 0xf);
 
 	mpc1_init_mpcc(&(mpc->mpcc_array[mpcc_id]), mpcc_id);
 
@@ -453,6 +460,13 @@ void mpc1_read_mpcc_state(
 			MPCC_BUSY, &s->busy);
 }
 
+void mpc1_cursor_lock(struct mpc *mpc, int opp_id, bool lock)
+{
+	struct dcn10_mpc *mpc10 = TO_DCN10_MPC(mpc);
+
+	REG_SET(CUR[opp_id], 0, CUR_VUPDATE_LOCK_SET, lock ? 1 : 0);
+}
+
 static const struct mpc_funcs dcn10_mpc_funcs = {
 	.read_mpcc_state = mpc1_read_mpcc_state,
 	.insert_plane = mpc1_insert_plane,
@@ -464,6 +478,7 @@ static const struct mpc_funcs dcn10_mpc_funcs = {
 	.assert_mpcc_idle_before_connect = mpc1_assert_mpcc_idle_before_connect,
 	.init_mpcc_list_from_hw = mpc1_init_mpcc_list_from_hw,
 	.update_blending = mpc1_update_blending,
+	.cursor_lock = mpc1_cursor_lock,
 	.set_denorm = NULL,
 	.set_denorm_clamp = NULL,
 	.set_output_csc = NULL,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.h
index 962a68e322ee..66a4719c22a0 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.h
@@ -39,11 +39,12 @@
 	SRII(MPCC_BG_G_Y, MPCC, inst),\
 	SRII(MPCC_BG_R_CR, MPCC, inst),\
 	SRII(MPCC_BG_B_CB, MPCC, inst),\
-	SRII(MPCC_BG_B_CB, MPCC, inst),\
-	SRII(MPCC_SM_CONTROL, MPCC, inst)
+	SRII(MPCC_SM_CONTROL, MPCC, inst),\
+	SRII(MPCC_UPDATE_LOCK_SEL, MPCC, inst)
 
 #define MPC_OUT_MUX_COMMON_REG_LIST_DCN1_0(inst) \
-	SRII(MUX, MPC_OUT, inst)
+	SRII(MUX, MPC_OUT, inst),\
+	VUPDATE_SRII(CUR, VUPDATE_LOCK_SET, inst)
 
 #define MPC_COMMON_REG_VARIABLE_LIST \
 	uint32_t MPCC_TOP_SEL[MAX_MPCC]; \
@@ -55,7 +56,9 @@
 	uint32_t MPCC_BG_R_CR[MAX_MPCC]; \
 	uint32_t MPCC_BG_B_CB[MAX_MPCC]; \
 	uint32_t MPCC_SM_CONTROL[MAX_MPCC]; \
-	uint32_t MUX[MAX_OPP];
+	uint32_t MUX[MAX_OPP]; \
+	uint32_t MPCC_UPDATE_LOCK_SEL[MAX_MPCC]; \
+	uint32_t CUR[MAX_OPP];
 
 #define MPC_COMMON_MASK_SH_LIST_DCN1_0(mask_sh)\
 	SF(MPCC0_MPCC_TOP_SEL, MPCC_TOP_SEL, mask_sh),\
@@ -78,7 +81,8 @@
 	SF(MPCC0_MPCC_SM_CONTROL, MPCC_SM_FIELD_ALT, mask_sh),\
 	SF(MPCC0_MPCC_SM_CONTROL, MPCC_SM_FORCE_NEXT_FRAME_POL, mask_sh),\
 	SF(MPCC0_MPCC_SM_CONTROL, MPCC_SM_FORCE_NEXT_TOP_POL, mask_sh),\
-	SF(MPC_OUT0_MUX, MPC_OUT_MUX, mask_sh)
+	SF(MPC_OUT0_MUX, MPC_OUT_MUX, mask_sh),\
+	SF(MPCC0_MPCC_UPDATE_LOCK_SEL, MPCC_UPDATE_LOCK_SEL, mask_sh)
 
 #define MPC_REG_FIELD_LIST(type) \
 	type MPCC_TOP_SEL;\
@@ -101,7 +105,9 @@
 	type MPCC_SM_FIELD_ALT;\
 	type MPCC_SM_FORCE_NEXT_FRAME_POL;\
 	type MPCC_SM_FORCE_NEXT_TOP_POL;\
-	type MPC_OUT_MUX;
+	type MPC_OUT_MUX;\
+	type MPCC_UPDATE_LOCK_SEL;\
+	type CUR_VUPDATE_LOCK_SET;
 
 struct dcn_mpc_registers {
 	MPC_COMMON_REG_VARIABLE_LIST
@@ -192,4 +198,6 @@ void mpc1_read_mpcc_state(
 		int mpcc_inst,
 		struct mpcc_state *s);
 
+void mpc1_cursor_lock(struct mpc *mpc, int opp_id, bool lock);
+
 #endif
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
index 17d96ec6acd8..ec0ab42becba 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
@@ -299,6 +299,7 @@ void optc1_set_vtg_params(struct timing_generator *optc,
 	uint32_t asic_blank_end;
 	uint32_t v_init;
 	uint32_t v_fp2 = 0;
+	int32_t vertical_line_start;
 
 	struct optc *optc1 = DCN10TG_FROM_TG(optc);
 
@@ -315,8 +316,9 @@ void optc1_set_vtg_params(struct timing_generator *optc,
 			patched_crtc_timing.v_border_top;
 
 	/* if VSTARTUP is before VSYNC, FP2 is the offset, otherwise 0 */
-	if (optc1->vstartup_start > asic_blank_end)
-		v_fp2 = optc1->vstartup_start - asic_blank_end;
+	vertical_line_start = asic_blank_end - optc1->vstartup_start + 1;
+	if (vertical_line_start < 0)
+		v_fp2 = -vertical_line_start;
 
 	/* Interlace */
 	if (REG(OTG_INTERLACE_CONTROL)) {
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
index 9a459a8fe8a0..8d1e52fb0393 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
@@ -158,6 +158,7 @@ struct dcn_optc_registers {
 	uint32_t OTG_GSL_WINDOW_Y;
 	uint32_t OTG_VUPDATE_KEEPOUT;
 	uint32_t OTG_CRC_CNTL;
+	uint32_t OTG_CRC_CNTL2;
 	uint32_t OTG_CRC0_DATA_RG;
 	uint32_t OTG_CRC0_DATA_B;
 	uint32_t OTG_CRC0_WINDOWA_X_CONTROL;
@@ -475,7 +476,11 @@ struct dcn_optc_registers {
 	type OPTC_DSC_SLICE_WIDTH;\
 	type OPTC_SEGMENT_WIDTH;\
 	type OPTC_DWB0_SOURCE_SELECT;\
-	type OPTC_DWB1_SOURCE_SELECT;
+	type OPTC_DWB1_SOURCE_SELECT;\
+	type OTG_CRC_DSC_MODE;\
+	type OTG_CRC_DATA_STREAM_COMBINE_MODE;\
+	type OTG_CRC_DATA_STREAM_SPLIT_MODE;\
+	type OTG_CRC_DATA_FORMAT;
 
 
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
index 07265ca7d28c..bacf865f55c0 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
@@ -51,6 +51,7 @@
 #include "dce112/dce112_resource.h"
 #include "dcn10_hubp.h"
 #include "dcn10_hubbub.h"
+#include "dce/dce_panel_cntl.h"
 
 #include "soc15_hw_ip.h"
 #include "vega10_ip_offset.h"
@@ -181,6 +182,14 @@ enum dcn10_clk_src_array_id {
 	.reg_name[id] = BASE(mm ## block ## id ## _ ## reg_name ## _BASE_IDX) + \
 					mm ## block ## id ## _ ## reg_name
 
+#define VUPDATE_SRII(reg_name, block, id)\
+	.reg_name[id] = BASE(mm ## reg_name ## 0 ## _ ## block ## id ## _BASE_IDX) + \
+					mm ## reg_name ## 0 ## _ ## block ## id
+
+/* set field/register/bitfield name */
+#define SFRB(field_name, reg_name, bitfield, post_fix)\
+	.field_name = reg_name ## __ ## bitfield ## post_fix
+
 /* NBIO */
 #define NBIO_BASE_INNER(seg) \
 	NBIF_BASE__INST0_SEG ## seg
@@ -321,6 +330,18 @@ static const struct dcn10_link_enc_mask le_mask = {
 		LINK_ENCODER_MASK_SH_LIST_DCN10(_MASK)
 };
 
+static const struct dce_panel_cntl_registers panel_cntl_regs[] = {
+	{ DCN_PANEL_CNTL_REG_LIST() }
+};
+
+static const struct dce_panel_cntl_shift panel_cntl_shift = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(__SHIFT)
+};
+
+static const struct dce_panel_cntl_mask panel_cntl_mask = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(_MASK)
+};
+
 static const struct dce110_aux_registers_shift aux_shift = {
 	DCN10_AUX_MASK_SH_LIST(__SHIFT)
 };
@@ -419,11 +440,13 @@ static const struct dcn_mpc_registers mpc_regs = {
 };
 
 static const struct dcn_mpc_shift mpc_shift = {
-	MPC_COMMON_MASK_SH_LIST_DCN1_0(__SHIFT)
+	MPC_COMMON_MASK_SH_LIST_DCN1_0(__SHIFT),\
+	SFRB(CUR_VUPDATE_LOCK_SET, CUR0_VUPDATE_LOCK_SET0, CUR0_VUPDATE_LOCK_SET, __SHIFT)
 };
 
 static const struct dcn_mpc_mask mpc_mask = {
-	MPC_COMMON_MASK_SH_LIST_DCN1_0(_MASK),
+	MPC_COMMON_MASK_SH_LIST_DCN1_0(_MASK),\
+	SFRB(CUR_VUPDATE_LOCK_SET, CUR0_VUPDATE_LOCK_SET0, CUR0_VUPDATE_LOCK_SET, _MASK)
 };
 
 #define tg_regs(id)\
@@ -807,6 +830,23 @@ struct link_encoder *dcn10_link_encoder_create(
 	return &enc10->base;
 }
 
+static struct panel_cntl *dcn10_panel_cntl_create(const struct panel_cntl_init_data *init_data)
+{
+	struct dce_panel_cntl *panel_cntl =
+		kzalloc(sizeof(struct dce_panel_cntl), GFP_KERNEL);
+
+	if (!panel_cntl)
+		return NULL;
+
+	dce_panel_cntl_construct(panel_cntl,
+			init_data,
+			&panel_cntl_regs[init_data->inst],
+			&panel_cntl_shift,
+			&panel_cntl_mask);
+
+	return &panel_cntl->base;
+}
+
 struct clock_source *dcn10_clock_source_create(
 	struct dc_context *ctx,
 	struct dc_bios *bios,
@@ -1291,6 +1331,7 @@ static const struct dc_cap_funcs cap_funcs = {
 static const struct resource_funcs dcn10_res_pool_funcs = {
 	.destroy = dcn10_destroy_resource_pool,
 	.link_enc_create = dcn10_link_encoder_create,
+	.panel_cntl_create = dcn10_panel_cntl_create,
 	.validate_bandwidth = dcn_validate_bandwidth,
 	.acquire_idle_pipe_for_layer = dcn10_acquire_idle_pipe_for_layer,
 	.validate_plane = dcn10_validate_plane,
@@ -1353,6 +1394,40 @@ static bool dcn10_resource_construct(
 	/* Raven DP PHY HBR2 eye diagram pattern is not stable. Use TP4 */
 	dc->caps.force_dp_tps4_for_cp2520 = true;
 
+	/* Color pipeline capabilities */
+	dc->caps.color.dpp.dcn_arch = 1;
+	dc->caps.color.dpp.input_lut_shared = 1;
+	dc->caps.color.dpp.icsc = 1;
+	dc->caps.color.dpp.dgam_ram = 1;
+	dc->caps.color.dpp.dgam_rom_caps.srgb = 1;
+	dc->caps.color.dpp.dgam_rom_caps.bt2020 = 1;
+	dc->caps.color.dpp.dgam_rom_caps.gamma2_2 = 0;
+	dc->caps.color.dpp.dgam_rom_caps.pq = 0;
+	dc->caps.color.dpp.dgam_rom_caps.hlg = 0;
+	dc->caps.color.dpp.post_csc = 0;
+	dc->caps.color.dpp.gamma_corr = 0;
+
+	dc->caps.color.dpp.hw_3d_lut = 0;
+	dc->caps.color.dpp.ogam_ram = 1; // RGAM on DCN1
+	dc->caps.color.dpp.ogam_rom_caps.srgb = 1;
+	dc->caps.color.dpp.ogam_rom_caps.bt2020 = 1;
+	dc->caps.color.dpp.ogam_rom_caps.gamma2_2 = 0;
+	dc->caps.color.dpp.ogam_rom_caps.pq = 0;
+	dc->caps.color.dpp.ogam_rom_caps.hlg = 0;
+	dc->caps.color.dpp.ocsc = 1;
+
+	/* no post-blend color operations */
+	dc->caps.color.mpc.gamut_remap = 0;
+	dc->caps.color.mpc.num_3dluts = 0;
+	dc->caps.color.mpc.shared_3d_lut = 0;
+	dc->caps.color.mpc.ogam_ram = 0;
+	dc->caps.color.mpc.ogam_rom_caps.srgb = 0;
+	dc->caps.color.mpc.ogam_rom_caps.bt2020 = 0;
+	dc->caps.color.mpc.ogam_rom_caps.gamma2_2 = 0;
+	dc->caps.color.mpc.ogam_rom_caps.pq = 0;
+	dc->caps.color.mpc.ogam_rom_caps.hlg = 0;
+	dc->caps.color.mpc.ocsc = 0;
+
 	if (dc->ctx->dce_environment == DCE_ENV_PRODUCTION_DRV)
 		dc->debug = debug_defaults_drv;
 	else
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 22f421e82733..3a290ccaeb82 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -962,7 +962,8 @@ void dcn20_blank_pixel_data(
 
 	if (blank) {
 		if (stream_res->abm)
-			stream_res->abm->funcs->set_abm_immediate_disable(stream_res->abm);
+			stream_res->abm->funcs->set_abm_immediate_disable(stream_res->abm,
+					stream->link->panel_cntl->inst);
 
 		if (dc->debug.visual_confirm != VISUAL_CONFIRM_DISABLE) {
 			test_pattern = CONTROLLER_DP_TEST_PATTERN_COLORSQUARES;
@@ -997,7 +998,8 @@ void dcn20_blank_pixel_data(
 
 	if (!blank)
 		if (stream_res->abm) {
-			stream_res->abm->funcs->set_pipe(stream_res->abm, stream_res->tg->inst + 1);
+			stream_res->abm->funcs->set_pipe(stream_res->abm, stream_res->tg->inst + 1,
+					stream->link->panel_cntl->inst);
 			stream_res->abm->funcs->set_abm_level(stream_res->abm, stream->abm_level);
 		}
 }
@@ -1478,8 +1480,11 @@ static void dcn20_program_pipe(
 	if (pipe_ctx->update_flags.bits.odm)
 		hws->funcs.update_odm(dc, context, pipe_ctx);
 
-	if (pipe_ctx->update_flags.bits.enable)
+	if (pipe_ctx->update_flags.bits.enable) {
 		dcn20_enable_plane(dc, pipe_ctx, context);
+		if (dc->res_pool->hubbub->funcs->force_wm_propagate_to_pipes)
+			dc->res_pool->hubbub->funcs->force_wm_propagate_to_pipes(dc->res_pool->hubbub);
+	}
 
 	if (pipe_ctx->update_flags.raw || pipe_ctx->plane_state->update_flags.raw || pipe_ctx->stream->update_flags.raw)
 		dcn20_update_dchubp_dpp(dc, pipe_ctx, context);
@@ -2038,7 +2043,8 @@ static void dcn20_reset_back_end_for_pipe(
 	if (pipe_ctx->top_pipe == NULL) {
 
 		if (pipe_ctx->stream_res.abm)
-			pipe_ctx->stream_res.abm->funcs->set_abm_immediate_disable(pipe_ctx->stream_res.abm);
+			pipe_ctx->stream_res.abm->funcs->set_abm_immediate_disable(pipe_ctx->stream_res.abm,
+					pipe_ctx->stream->link->panel_cntl->inst);
 
 		pipe_ctx->stream_res.tg->funcs->disable_crtc(pipe_ctx->stream_res.tg);
 
@@ -2171,6 +2177,13 @@ void dcn20_update_mpcc(struct dc *dc, struct pipe_ctx *pipe_ctx)
 	 */
 	mpcc_id = hubp->inst;
 
+	/* If there is no full update, don't need to touch MPC tree*/
+	if (!pipe_ctx->plane_state->update_flags.bits.full_update &&
+		!pipe_ctx->update_flags.bits.mpcc) {
+		mpc->funcs->update_blending(mpc, &blnd_cfg, mpcc_id);
+		return;
+	}
+
 	/* check if this MPCC is already being used */
 	new_mpcc = mpc->funcs->get_mpcc_for_dpp(mpc_tree_params, mpcc_id);
 	/* remove MPCC if being used */
@@ -2294,7 +2307,8 @@ void dcn20_fpga_init_hw(struct dc *dc)
 
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_REFDIV, 2);
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1);
-	REG_WRITE(REFCLK_CNTL, 0);
+	if (REG(REFCLK_CNTL))
+		REG_WRITE(REFCLK_CNTL, 0);
 	//
 
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_init.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_init.c
index 1e73357eda34..c83d98e0d211 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_init.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_init.c
@@ -52,6 +52,7 @@ static const struct hw_sequencer_funcs dcn20_funcs = {
 	.disable_plane = dcn20_disable_plane,
 	.pipe_control_lock = dcn20_pipe_control_lock,
 	.interdependent_update_lock = dcn10_lock_all_pipes,
+	.cursor_lock = dcn10_cursor_lock,
 	.prepare_bandwidth = dcn20_prepare_bandwidth,
 	.optimize_bandwidth = dcn20_optimize_bandwidth,
 	.update_bandwidth = dcn20_update_bandwidth,
@@ -82,6 +83,7 @@ static const struct hw_sequencer_funcs dcn20_funcs = {
 	.init_vm_ctx = dcn20_init_vm_ctx,
 	.set_flip_control_gsl = dcn20_set_flip_control_gsl,
 	.get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
+	.set_backlight_level = dce110_set_backlight_level,
 };
 
 static const struct hwseq_private_funcs dcn20_private_funcs = {
@@ -97,8 +99,6 @@ static const struct hwseq_private_funcs dcn20_private_funcs = {
 	.reset_hw_ctx_wrap = dcn20_reset_hw_ctx_wrap,
 	.enable_stream_timing = dcn20_enable_stream_timing,
 	.edp_backlight_control = dce110_edp_backlight_control,
-	.is_panel_backlight_on = dce110_is_panel_backlight_on,
-	.is_panel_powered_on = dce110_is_panel_powered_on,
 	.disable_stream_gating = dcn20_disable_stream_gating,
 	.enable_stream_gating = dcn20_enable_stream_gating,
 	.setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c
index e4ac73035c84..8d209dae66e6 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c
@@ -49,6 +49,12 @@
 #define IND_REG(index) \
 	(enc10->link_regs->index)
 
+#ifndef MAX
+#define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
+#endif
+#ifndef MIN
+#define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
+#endif
 
 static struct mpll_cfg dcn2_mpll_cfg[] = {
 	// RBR
@@ -260,6 +266,38 @@ void dcn20_link_encoder_enable_dp_output(
 
 }
 
+void dcn20_link_encoder_get_max_link_cap(struct link_encoder *enc,
+	struct dc_link_settings *link_settings)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+	uint32_t is_in_usb_c_dp4_mode = 0;
+
+	dcn10_link_encoder_get_max_link_cap(enc, link_settings);
+
+	/* in usb c dp2 mode, max lane count is 2 */
+	if (enc->funcs->is_in_alt_mode && enc->funcs->is_in_alt_mode(enc)) {
+		REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, &is_in_usb_c_dp4_mode);
+		if (!is_in_usb_c_dp4_mode)
+			link_settings->lane_count = MIN(LANE_COUNT_TWO, link_settings->lane_count);
+	}
+
+}
+
+bool dcn20_link_encoder_is_in_alt_mode(struct link_encoder *enc)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+	uint32_t dp_alt_mode_disable = 0;
+	bool is_usb_c_alt_mode = false;
+
+	if (enc->features.flags.bits.DP_IS_USB_C) {
+		/* if value == 1 alt mode is disabled, otherwise it is enabled */
+		REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, &dp_alt_mode_disable);
+		is_usb_c_alt_mode = (dp_alt_mode_disable == 0);
+	}
+
+	return is_usb_c_alt_mode;
+}
+
 #define AUX_REG(reg)\
 	(enc10->aux_regs->reg)
 
@@ -338,6 +376,8 @@ static const struct link_encoder_funcs dcn20_link_enc_funcs = {
 	.fec_is_active = enc2_fec_is_active,
 	.get_dig_mode = dcn10_get_dig_mode,
 	.get_dig_frontend = dcn10_get_dig_frontend,
+	.is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode,
+	.get_max_link_cap = dcn20_link_encoder_get_max_link_cap,
 };
 
 void dcn20_link_encoder_construct(
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h
index 8cab8107fd94..284a1ee4d249 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h
@@ -343,6 +343,10 @@ void dcn20_link_encoder_enable_dp_output(
 	const struct dc_link_settings *link_settings,
 	enum clock_source_id clock_source);
 
+bool dcn20_link_encoder_is_in_alt_mode(struct link_encoder *enc);
+void dcn20_link_encoder_get_max_link_cap(struct link_encoder *enc,
+	struct dc_link_settings *link_settings);
+
 void dcn20_link_encoder_construct(
 	struct dcn20_link_encoder *enc20,
 	const struct encoder_init_data *init_data,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.c
index de9c857ab3e9..99cc095dc33c 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.c
@@ -452,7 +452,7 @@ void mpc2_set_output_gamma(
 		next_mode = LUT_RAM_A;
 
 	mpc20_power_on_ogam_lut(mpc, mpcc_id, true);
-	mpc20_configure_ogam_lut(mpc, mpcc_id, next_mode == LUT_RAM_A ? true:false);
+	mpc20_configure_ogam_lut(mpc, mpcc_id, next_mode == LUT_RAM_A);
 
 	if (next_mode == LUT_RAM_A)
 		mpc2_program_luta(mpc, mpcc_id, params);
@@ -545,6 +545,7 @@ const struct mpc_funcs dcn20_mpc_funcs = {
 	.mpc_init = mpc1_mpc_init,
 	.mpc_init_single_inst = mpc1_mpc_init_single_inst,
 	.update_blending = mpc2_update_blending,
+	.cursor_lock = mpc1_cursor_lock,
 	.get_mpcc_for_dpp = mpc2_get_mpcc_for_dpp,
 	.wait_for_idle = mpc2_assert_idle_mpcc,
 	.assert_mpcc_idle_before_connect = mpc2_assert_mpcc_idle_before_connect,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.h b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.h
index c78fd5123497..496658f420db 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.h
@@ -179,7 +179,8 @@
 	SF(MPC_OUT0_DENORM_CLAMP_G_Y, MPC_OUT_DENORM_CLAMP_MAX_G_Y, mask_sh),\
 	SF(MPC_OUT0_DENORM_CLAMP_G_Y, MPC_OUT_DENORM_CLAMP_MIN_G_Y, mask_sh),\
 	SF(MPC_OUT0_DENORM_CLAMP_B_CB, MPC_OUT_DENORM_CLAMP_MAX_B_CB, mask_sh),\
-	SF(MPC_OUT0_DENORM_CLAMP_B_CB, MPC_OUT_DENORM_CLAMP_MIN_B_CB, mask_sh)
+	SF(MPC_OUT0_DENORM_CLAMP_B_CB, MPC_OUT_DENORM_CLAMP_MIN_B_CB, mask_sh),\
+	SF(CUR_VUPDATE_LOCK_SET0, CUR_VUPDATE_LOCK_SET, mask_sh)
 
 /*
  *	DCN2 MPC_OCSC debug status register:
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
index d875b0c38fde..8c16967fe018 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
@@ -409,6 +409,18 @@ void optc2_program_manual_trigger(struct timing_generator *optc)
 			OTG_TRIGA_MANUAL_TRIG, 1);
 }
 
+bool optc2_configure_crc(struct timing_generator *optc,
+			  const struct crc_params *params)
+{
+	struct optc *optc1 = DCN10TG_FROM_TG(optc);
+
+	REG_SET_2(OTG_CRC_CNTL2, 0,
+			OTG_CRC_DSC_MODE, params->dsc_mode,
+			OTG_CRC_DATA_STREAM_COMBINE_MODE, params->odm_mode);
+
+	return optc1_configure_crc(optc, params);
+}
+
 static struct timing_generator_funcs dcn20_tg_funcs = {
 		.validate_timing = optc1_validate_timing,
 		.program_timing = optc1_program_timing,
@@ -452,7 +464,7 @@ static struct timing_generator_funcs dcn20_tg_funcs = {
 		.clear_optc_underflow = optc1_clear_optc_underflow,
 		.setup_global_swap_lock = NULL,
 		.get_crc = optc1_get_crc,
-		.configure_crc = optc1_configure_crc,
+		.configure_crc = optc2_configure_crc,
 		.set_dsc_config = optc2_set_dsc_config,
 		.set_dwb_source = optc2_set_dwb_source,
 		.set_odm_bypass = optc2_set_odm_bypass,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h
index 239cc40ae474..e0a0a8a8e2c6 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h
@@ -36,6 +36,7 @@
 	SRI(OTG_GSL_WINDOW_Y, OTG, inst),\
 	SRI(OTG_VUPDATE_KEEPOUT, OTG, inst),\
 	SRI(OTG_DSC_START_POSITION, OTG, inst),\
+	SRI(OTG_CRC_CNTL2, OTG, inst),\
 	SRI(OPTC_DATA_FORMAT_CONTROL, ODM, inst),\
 	SRI(OPTC_BYTES_PER_PIXEL, ODM, inst),\
 	SRI(OPTC_WIDTH_CONTROL, ODM, inst),\
@@ -62,6 +63,10 @@
 	SF(OTG0_OTG_GSL_CONTROL, OTG_MASTER_UPDATE_LOCK_GSL_EN, mask_sh), \
 	SF(OTG0_OTG_DSC_START_POSITION, OTG_DSC_START_POSITION_X, mask_sh), \
 	SF(OTG0_OTG_DSC_START_POSITION, OTG_DSC_START_POSITION_LINE_NUM, mask_sh),\
+	SF(OTG0_OTG_CRC_CNTL2, OTG_CRC_DSC_MODE, mask_sh),\
+	SF(OTG0_OTG_CRC_CNTL2, OTG_CRC_DATA_STREAM_COMBINE_MODE, mask_sh),\
+	SF(OTG0_OTG_CRC_CNTL2, OTG_CRC_DATA_STREAM_SPLIT_MODE, mask_sh),\
+	SF(OTG0_OTG_CRC_CNTL2, OTG_CRC_DATA_FORMAT, mask_sh),\
 	SF(ODM0_OPTC_DATA_SOURCE_SELECT, OPTC_SEG0_SRC_SEL, mask_sh),\
 	SF(ODM0_OPTC_DATA_SOURCE_SELECT, OPTC_SEG1_SRC_SEL, mask_sh),\
 	SF(ODM0_OPTC_DATA_SOURCE_SELECT, OPTC_NUM_OF_INPUT_SEGMENT, mask_sh),\
@@ -109,4 +114,6 @@ void optc2_lock_doublebuffer_enable(struct timing_generator *optc);
 void optc2_setup_manual_trigger(struct timing_generator *optc);
 void optc2_program_manual_trigger(struct timing_generator *optc);
 bool optc2_is_two_pixels_per_containter(const struct dc_crtc_timing *timing);
+bool optc2_configure_crc(struct timing_generator *optc,
+			  const struct crc_params *params);
 #endif /* __DC_OPTC_DCN20_H__ */
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 5cdbba0cd873..60ea499c1ca8 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -61,6 +61,7 @@
 #include "dcn20_dccg.h"
 #include "dcn20_vmid.h"
 #include "dc_link_ddc.h"
+#include "dce/dce_panel_cntl.h"
 
 #include "navi10_ip_offset.h"
 
@@ -508,6 +509,10 @@ enum dcn20_clk_src_array_id {
 	.block ## _ ## reg_name[id] = BASE(mm ## block ## id ## _ ## reg_name ## _BASE_IDX) + \
 					mm ## block ## id ## _ ## reg_name
 
+#define VUPDATE_SRII(reg_name, block, id)\
+	.reg_name[id] = BASE(mm ## reg_name ## _ ## block ## id ## _BASE_IDX) + \
+					mm ## reg_name ## _ ## block ## id
+
 /* NBIO */
 #define NBIO_BASE_INNER(seg) \
 	NBIO_BASE__INST0_SEG ## seg
@@ -687,6 +692,18 @@ static const struct dcn10_link_enc_mask le_mask = {
 	DPCS_DCN2_MASK_SH_LIST(_MASK)
 };
 
+static const struct dce_panel_cntl_registers panel_cntl_regs[] = {
+	{ DCN_PANEL_CNTL_REG_LIST() }
+};
+
+static const struct dce_panel_cntl_shift panel_cntl_shift = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(__SHIFT)
+};
+
+static const struct dce_panel_cntl_mask panel_cntl_mask = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(_MASK)
+};
+
 #define ipp_regs(id)\
 [id] = {\
 	IPP_REG_LIST_DCN20(id),\
@@ -1289,6 +1306,23 @@ struct link_encoder *dcn20_link_encoder_create(
 	return &enc20->enc10.base;
 }
 
+static struct panel_cntl *dcn20_panel_cntl_create(const struct panel_cntl_init_data *init_data)
+{
+	struct dce_panel_cntl *panel_cntl =
+		kzalloc(sizeof(struct dce_panel_cntl), GFP_KERNEL);
+
+	if (!panel_cntl)
+		return NULL;
+
+	dce_panel_cntl_construct(panel_cntl,
+			init_data,
+			&panel_cntl_regs[init_data->inst],
+			&panel_cntl_shift,
+			&panel_cntl_mask);
+
+	return &panel_cntl->base;
+}
+
 struct clock_source *dcn20_clock_source_create(
 	struct dc_context *ctx,
 	struct dc_bios *bios,
@@ -1906,7 +1940,7 @@ bool dcn20_split_stream_for_odm(
 	return true;
 }
 
-void dcn20_split_stream_for_mpc(
+bool dcn20_split_stream_for_mpc(
 		struct resource_context *res_ctx,
 		const struct resource_pool *pool,
 		struct pipe_ctx *primary_pipe,
@@ -1935,8 +1969,11 @@ void dcn20_split_stream_for_mpc(
 	secondary_pipe->top_pipe = primary_pipe;
 
 	ASSERT(primary_pipe->plane_state);
-	resource_build_scaling_params(primary_pipe);
-	resource_build_scaling_params(secondary_pipe);
+	if (!resource_build_scaling_params(primary_pipe) ||
+			!resource_build_scaling_params(secondary_pipe))
+		return false;
+
+	return true;
 }
 
 void dcn20_populate_dml_writeback_from_context(
@@ -2212,12 +2249,12 @@ int dcn20_populate_dml_pipes_from_context(
 					|| pipes[pipe_cnt].pipe.dest.odm_combine != dm_odm_combine_mode_disabled;
 			pipes[pipe_cnt].pipe.src.source_scan = pln->rotation == ROTATION_ANGLE_90
 					|| pln->rotation == ROTATION_ANGLE_270 ? dm_vert : dm_horz;
-			pipes[pipe_cnt].pipe.src.viewport_y_y = scl->viewport.y;
-			pipes[pipe_cnt].pipe.src.viewport_y_c = scl->viewport_c.y;
-			pipes[pipe_cnt].pipe.src.viewport_width = scl->viewport.width;
-			pipes[pipe_cnt].pipe.src.viewport_width_c = scl->viewport_c.width;
-			pipes[pipe_cnt].pipe.src.viewport_height = scl->viewport.height;
-			pipes[pipe_cnt].pipe.src.viewport_height_c = scl->viewport_c.height;
+			pipes[pipe_cnt].pipe.src.viewport_y_y = scl->viewport_unadjusted.y;
+			pipes[pipe_cnt].pipe.src.viewport_y_c = scl->viewport_c_unadjusted.y;
+			pipes[pipe_cnt].pipe.src.viewport_width = scl->viewport_unadjusted.width;
+			pipes[pipe_cnt].pipe.src.viewport_width_c = scl->viewport_c_unadjusted.width;
+			pipes[pipe_cnt].pipe.src.viewport_height = scl->viewport_unadjusted.height;
+			pipes[pipe_cnt].pipe.src.viewport_height_c = scl->viewport_c_unadjusted.height;
 			pipes[pipe_cnt].pipe.src.surface_width_y = pln->plane_size.surface_size.width;
 			pipes[pipe_cnt].pipe.src.surface_height_y = pln->plane_size.surface_size.height;
 			pipes[pipe_cnt].pipe.src.surface_width_c = pln->plane_size.chroma_size.width;
@@ -2593,19 +2630,24 @@ int dcn20_validate_apply_pipe_split_flags(
 
 	/* Avoid split loop looks for lowest voltage level that allows most unsplit pipes possible */
 	if (avoid_split) {
+		int max_mpc_comb = context->bw_ctx.dml.vba.maxMpcComb;
+
 		for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
 			if (!context->res_ctx.pipe_ctx[i].stream)
 				continue;
 
 			for (vlevel_split = vlevel; vlevel <= context->bw_ctx.dml.soc.num_states; vlevel++)
-				if (context->bw_ctx.dml.vba.NoOfDPP[vlevel][0][pipe_idx] == 1)
+				if (context->bw_ctx.dml.vba.NoOfDPP[vlevel][0][pipe_idx] == 1 &&
+						context->bw_ctx.dml.vba.ModeSupport[vlevel][0])
 					break;
 			/* Impossible to not split this pipe */
 			if (vlevel > context->bw_ctx.dml.soc.num_states)
 				vlevel = vlevel_split;
+			else
+				max_mpc_comb = 0;
 			pipe_idx++;
 		}
-		context->bw_ctx.dml.vba.maxMpcComb = 0;
+		context->bw_ctx.dml.vba.maxMpcComb = max_mpc_comb;
 	}
 
 	/* Split loop sets which pipe should be split based on dml outputs and dc flags */
@@ -2761,9 +2803,10 @@ bool dcn20_fast_validate_bw(
 						goto validate_fail;
 					dcn20_build_mapped_resource(dc, context, pipe->stream);
 				} else
-					dcn20_split_stream_for_mpc(
-						&context->res_ctx, dc->res_pool,
-						pipe, hsplit_pipe);
+					if (!dcn20_split_stream_for_mpc(
+							&context->res_ctx, dc->res_pool,
+							pipe, hsplit_pipe))
+						goto validate_fail;
 				pipe_split_from[hsplit_pipe->pipe_idx] = pipe_idx;
 			}
 		} else if (hsplit_pipe && hsplit_pipe->plane_state == pipe->plane_state) {
@@ -3003,7 +3046,7 @@ void dcn20_calculate_dlg_params(
 				pipe_idx,
 				cstate_en,
 				context->bw_ctx.bw.dcn.clk.p_state_change_support,
-				false, false, false);
+				false, false, true);
 
 		context->bw_ctx.dml.funcs.rq_dlg_get_rq_reg(&context->bw_ctx.dml,
 				&context->res_ctx.pipe_ctx[i].rq_regs,
@@ -3189,6 +3232,7 @@ enum dc_status dcn20_patch_unknown_plane_state(struct dc_plane_state *plane_stat
 static struct resource_funcs dcn20_res_pool_funcs = {
 	.destroy = dcn20_destroy_resource_pool,
 	.link_enc_create = dcn20_link_encoder_create,
+	.panel_cntl_create = dcn20_panel_cntl_create,
 	.validate_bandwidth = dcn20_validate_bandwidth,
 	.acquire_idle_pipe_for_layer = dcn20_acquire_idle_pipe_for_layer,
 	.add_stream_to_ctx = dcn20_add_stream_to_ctx,
@@ -3427,6 +3471,13 @@ void dcn20_patch_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_st
 		bb->dram_clock_change_latency_us =
 				dc->bb_overrides.dram_clock_change_latency_ns / 1000.0;
 	}
+
+	if ((int)(bb->dummy_pstate_latency_us * 1000)
+				!= dc->bb_overrides.dummy_clock_change_latency_ns
+			&& dc->bb_overrides.dummy_clock_change_latency_ns) {
+		bb->dummy_pstate_latency_us =
+				dc->bb_overrides.dummy_clock_change_latency_ns / 1000.0;
+	}
 }
 
 static struct _vcs_dpi_soc_bounding_box_st *get_asic_rev_soc_bb(
@@ -3662,9 +3713,42 @@ static bool dcn20_resource_construct(
 	dc->caps.max_slave_planes = 1;
 	dc->caps.post_blend_color_processing = true;
 	dc->caps.force_dp_tps4_for_cp2520 = true;
-	dc->caps.hw_3d_lut = true;
 	dc->caps.extended_aux_timeout_support = true;
 
+	/* Color pipeline capabilities */
+	dc->caps.color.dpp.dcn_arch = 1;
+	dc->caps.color.dpp.input_lut_shared = 0;
+	dc->caps.color.dpp.icsc = 1;
+	dc->caps.color.dpp.dgam_ram = 1;
+	dc->caps.color.dpp.dgam_rom_caps.srgb = 1;
+	dc->caps.color.dpp.dgam_rom_caps.bt2020 = 1;
+	dc->caps.color.dpp.dgam_rom_caps.gamma2_2 = 0;
+	dc->caps.color.dpp.dgam_rom_caps.pq = 0;
+	dc->caps.color.dpp.dgam_rom_caps.hlg = 0;
+	dc->caps.color.dpp.post_csc = 0;
+	dc->caps.color.dpp.gamma_corr = 0;
+
+	dc->caps.color.dpp.hw_3d_lut = 1;
+	dc->caps.color.dpp.ogam_ram = 1;
+	// no OGAM ROM on DCN2, only MPC ROM
+	dc->caps.color.dpp.ogam_rom_caps.srgb = 0;
+	dc->caps.color.dpp.ogam_rom_caps.bt2020 = 0;
+	dc->caps.color.dpp.ogam_rom_caps.gamma2_2 = 0;
+	dc->caps.color.dpp.ogam_rom_caps.pq = 0;
+	dc->caps.color.dpp.ogam_rom_caps.hlg = 0;
+	dc->caps.color.dpp.ocsc = 0;
+
+	dc->caps.color.mpc.gamut_remap = 0;
+	dc->caps.color.mpc.num_3dluts = 0;
+	dc->caps.color.mpc.shared_3d_lut = 0;
+	dc->caps.color.mpc.ogam_ram = 1;
+	dc->caps.color.mpc.ogam_rom_caps.srgb = 0;
+	dc->caps.color.mpc.ogam_rom_caps.bt2020 = 0;
+	dc->caps.color.mpc.ogam_rom_caps.gamma2_2 = 0;
+	dc->caps.color.mpc.ogam_rom_caps.pq = 0;
+	dc->caps.color.mpc.ogam_rom_caps.hlg = 0;
+	dc->caps.color.mpc.ocsc = 1;
+
 	if (dc->ctx->dce_environment == DCE_ENV_PRODUCTION_DRV) {
 		dc->debug = debug_defaults_drv;
 	} else if (dc->ctx->dce_environment == DCE_ENV_FPGA_MAXIMUS) {
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.h b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.h
index 9d5bff9455fd..578265ccbf5b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.h
@@ -129,7 +129,7 @@ void dcn20_release_dsc(struct resource_context *res_ctx,
 			const struct resource_pool *pool,
 			struct display_stream_compressor **dsc);
 bool dcn20_validate_dsc(struct dc *dc, struct dc_state *new_ctx);
-void dcn20_split_stream_for_mpc(
+bool dcn20_split_stream_for_mpc(
 		struct resource_context *res_ctx,
 		const struct resource_pool *pool,
 		struct pipe_ctx *primary_pipe,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c
index d285ba622d61..960a0716dde5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c
@@ -778,21 +778,28 @@ void dmcub_PLAT_54186_wa(struct hubp *hubp, struct surface_flip_registers *flip_
 {
 	struct dc_dmub_srv *dmcub = hubp->ctx->dmub_srv;
 	struct dcn21_hubp *hubp21 = TO_DCN21_HUBP(hubp);
-	struct dmub_rb_cmd_PLAT_54186_wa PLAT_54186_wa = { 0 };
-
-	PLAT_54186_wa.header.type = DMUB_CMD__PLAT_54186_WA;
-	PLAT_54186_wa.flip.DCSURF_PRIMARY_SURFACE_ADDRESS = flip_regs->DCSURF_PRIMARY_SURFACE_ADDRESS;
-	PLAT_54186_wa.flip.DCSURF_PRIMARY_SURFACE_ADDRESS_C = flip_regs->DCSURF_PRIMARY_SURFACE_ADDRESS_C;
-	PLAT_54186_wa.flip.DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH = flip_regs->DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH;
-	PLAT_54186_wa.flip.DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH_C = flip_regs->DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH_C;
-	PLAT_54186_wa.flip.flip_params.grph_stereo = flip_regs->grph_stereo;
-	PLAT_54186_wa.flip.flip_params.hubp_inst = hubp->inst;
-	PLAT_54186_wa.flip.flip_params.immediate = flip_regs->immediate;
-	PLAT_54186_wa.flip.flip_params.tmz_surface = flip_regs->tmz_surface;
-	PLAT_54186_wa.flip.flip_params.vmid = flip_regs->vmid;
+	union dmub_rb_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	cmd.PLAT_54186_wa.header.type = DMUB_CMD__PLAT_54186_WA;
+	cmd.PLAT_54186_wa.header.payload_bytes = sizeof(cmd.PLAT_54186_wa.flip);
+	cmd.PLAT_54186_wa.flip.DCSURF_PRIMARY_SURFACE_ADDRESS =
+		flip_regs->DCSURF_PRIMARY_SURFACE_ADDRESS;
+	cmd.PLAT_54186_wa.flip.DCSURF_PRIMARY_SURFACE_ADDRESS_C =
+		flip_regs->DCSURF_PRIMARY_SURFACE_ADDRESS_C;
+	cmd.PLAT_54186_wa.flip.DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH =
+		flip_regs->DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH;
+	cmd.PLAT_54186_wa.flip.DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH_C =
+		flip_regs->DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH_C;
+	cmd.PLAT_54186_wa.flip.flip_params.grph_stereo = flip_regs->grph_stereo;
+	cmd.PLAT_54186_wa.flip.flip_params.hubp_inst = hubp->inst;
+	cmd.PLAT_54186_wa.flip.flip_params.immediate = flip_regs->immediate;
+	cmd.PLAT_54186_wa.flip.flip_params.tmz_surface = flip_regs->tmz_surface;
+	cmd.PLAT_54186_wa.flip.flip_params.vmid = flip_regs->vmid;
 
 	PERF_TRACE();  // TODO: remove after performance is stable.
-	dc_dmub_srv_cmd_queue(dmcub, &PLAT_54186_wa.header);
+	dc_dmub_srv_cmd_queue(dmcub, &cmd);
 	PERF_TRACE();  // TODO: remove after performance is stable.
 	dc_dmub_srv_cmd_execute(dmcub);
 	PERF_TRACE();  // TODO: remove after performance is stable.
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_init.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_init.c
index b9ff9767e08f..ae05a8bfdae1 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_init.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_init.c
@@ -53,6 +53,7 @@ static const struct hw_sequencer_funcs dcn21_funcs = {
 	.disable_plane = dcn20_disable_plane,
 	.pipe_control_lock = dcn20_pipe_control_lock,
 	.interdependent_update_lock = dcn10_lock_all_pipes,
+	.cursor_lock = dcn10_cursor_lock,
 	.prepare_bandwidth = dcn20_prepare_bandwidth,
 	.optimize_bandwidth = dcn20_optimize_bandwidth,
 	.update_bandwidth = dcn20_update_bandwidth,
@@ -90,6 +91,8 @@ static const struct hw_sequencer_funcs dcn21_funcs = {
 	.set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level,
 	.optimize_pwr_state = dcn21_optimize_pwr_state,
 	.exit_optimized_pwr_state = dcn21_exit_optimized_pwr_state,
+	.power_down = dce110_power_down,
+	.set_backlight_level = dce110_set_backlight_level,
 };
 
 static const struct hwseq_private_funcs dcn21_private_funcs = {
@@ -105,8 +108,6 @@ static const struct hwseq_private_funcs dcn21_private_funcs = {
 	.reset_hw_ctx_wrap = dcn20_reset_hw_ctx_wrap,
 	.enable_stream_timing = dcn20_enable_stream_timing,
 	.edp_backlight_control = dce110_edp_backlight_control,
-	.is_panel_backlight_on = dce110_is_panel_backlight_on,
-	.is_panel_powered_on = dce110_is_panel_powered_on,
 	.disable_stream_gating = dcn20_disable_stream_gating,
 	.enable_stream_gating = dcn20_enable_stream_gating,
 	.setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.c
index e45683ac871a..aa46c35b05a2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.c
@@ -203,29 +203,6 @@ static bool update_cfg_data(
 	return true;
 }
 
-void dcn21_link_encoder_get_max_link_cap(struct link_encoder *enc,
-	struct dc_link_settings *link_settings)
-{
-	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
-	uint32_t value;
-
-	REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, &value);
-
-	if (!value && link_settings->lane_count > LANE_COUNT_TWO)
-		link_settings->lane_count = LANE_COUNT_TWO;
-}
-
-bool dcn21_link_encoder_is_in_alt_mode(struct link_encoder *enc)
-{
-	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
-	uint32_t value;
-
-	REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, &value);
-
-	// if value == 1 alt mode is disabled, otherwise it is enabled
-	return !value;
-}
-
 bool dcn21_link_encoder_acquire_phy(struct link_encoder *enc)
 {
 	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
@@ -348,8 +325,8 @@ static const struct link_encoder_funcs dcn21_link_enc_funcs = {
 	.fec_set_ready = enc2_fec_set_ready,
 	.fec_is_active = enc2_fec_is_active,
 	.get_dig_frontend = dcn10_get_dig_frontend,
-	.is_in_alt_mode = dcn21_link_encoder_is_in_alt_mode,
-	.get_max_link_cap = dcn21_link_encoder_get_max_link_cap,
+	.is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode,
+	.get_max_link_cap = dcn20_link_encoder_get_max_link_cap,
 };
 
 void dcn21_link_encoder_construct(
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index b25484aa8222..ceaf70a934c3 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -61,6 +61,7 @@
 #include "dcn21_hubbub.h"
 #include "dcn10/dcn10_resource.h"
 #include "dce110/dce110_resource.h"
+#include "dce/dce_panel_cntl.h"
 
 #include "dcn20/dcn20_dwb.h"
 #include "dcn20/dcn20_mmhubbub.h"
@@ -85,6 +86,7 @@
 #include "vm_helper.h"
 #include "dcn20/dcn20_vmid.h"
 #include "dce/dmub_psr.h"
+#include "dce/dmub_abm.h"
 
 #define SOC_BOUNDING_BOX_VALID false
 #define DC_LOGGER_INIT(logger)
@@ -284,7 +286,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = {
 	.dram_channel_width_bytes = 4,
 	.fabric_datapath_to_dcn_data_return_bytes = 32,
 	.dcn_downspread_percent = 0.5,
-	.downspread_percent = 0.5,
+	.downspread_percent = 0.38,
 	.dram_page_open_time_ns = 50.0,
 	.dram_rw_turnaround_time_ns = 17.5,
 	.dram_return_buffer_per_channel_bytes = 8192,
@@ -340,6 +342,10 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = {
 	.block ## _ ## reg_name[id] = BASE(mm ## block ## id ## _ ## reg_name ## _BASE_IDX) + \
 					mm ## block ## id ## _ ## reg_name
 
+#define VUPDATE_SRII(reg_name, block, id)\
+	.reg_name[id] = BASE(mm ## reg_name ## _ ## block ## id ## _BASE_IDX) + \
+					mm ## reg_name ## _ ## block ## id
+
 /* NBIO */
 #define NBIO_BASE_INNER(seg) \
 	NBIF0_BASE__INST0_SEG ## seg
@@ -991,9 +997,12 @@ static void dcn21_resource_destruct(struct dcn21_resource_pool *pool)
 		pool->base.dp_clock_source = NULL;
 	}
 
-
-	if (pool->base.abm != NULL)
-		dce_abm_destroy(&pool->base.abm);
+	if (pool->base.abm != NULL) {
+		if (pool->base.abm->ctx->dc->config.disable_dmcu)
+			dmub_abm_destroy(&pool->base.abm);
+		else
+			dce_abm_destroy(&pool->base.abm);
+	}
 
 	if (pool->base.dmcu != NULL)
 		dce_dmcu_destroy(&pool->base.dmcu);
@@ -1374,64 +1383,49 @@ static void update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
 {
 	struct dcn21_resource_pool *pool = TO_DCN21_RES_POOL(dc->res_pool);
 	struct clk_limit_table *clk_table = &bw_params->clk_table;
-	unsigned int i, j, k;
-	int closest_clk_lvl;
+	struct _vcs_dpi_voltage_scaling_st clock_limits[DC__VOLTAGE_STATES];
+	unsigned int i, j, closest_clk_lvl;
 
 	// Default clock levels are used for diags, which may lead to overclocking.
-	if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment) && !IS_DIAG_DC(dc->ctx->dce_environment)) {
+	if (!IS_DIAG_DC(dc->ctx->dce_environment)) {
 		dcn2_1_ip.max_num_otg = pool->base.res_cap->num_timing_generator;
 		dcn2_1_ip.max_num_dpp = pool->base.pipe_count;
 		dcn2_1_soc.num_chans = bw_params->num_channels;
 
-		/* Vmin: leave lowest DCN clocks, override with dcfclk, fclk, memclk from fuse */
-		dcn2_1_soc.clock_limits[0].state = 0;
-		dcn2_1_soc.clock_limits[0].dcfclk_mhz = clk_table->entries[0].dcfclk_mhz;
-		dcn2_1_soc.clock_limits[0].fabricclk_mhz = clk_table->entries[0].fclk_mhz;
-		dcn2_1_soc.clock_limits[0].socclk_mhz = clk_table->entries[0].socclk_mhz;
-		dcn2_1_soc.clock_limits[0].dram_speed_mts = clk_table->entries[0].memclk_mhz * 2;
-
-		/*
-		 * Other levels: find closest DCN clocks that fit the given clock limit using dcfclk
-		 * as indicator
-		 */
-
-		closest_clk_lvl = -1;
-		/* index currently being filled */
-		k = 1;
-		for (i = 1; i < clk_table->num_entries; i++) {
-			/* loop backwards, skip duplicate state*/
-			for (j = dcn2_1_soc.num_states - 1; j >= k; j--) {
+		ASSERT(clk_table->num_entries);
+		for (i = 0; i < clk_table->num_entries; i++) {
+			/* loop backwards*/
+			for (closest_clk_lvl = 0, j = dcn2_1_soc.num_states - 1; j >= 0; j--) {
 				if ((unsigned int) dcn2_1_soc.clock_limits[j].dcfclk_mhz <= clk_table->entries[i].dcfclk_mhz) {
 					closest_clk_lvl = j;
 					break;
 				}
 			}
 
-			/* if found a lvl that fits, use the DCN clks from it, if not, go to next clk limit*/
-			if (closest_clk_lvl != -1) {
-				dcn2_1_soc.clock_limits[k].state = i;
-				dcn2_1_soc.clock_limits[k].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
-				dcn2_1_soc.clock_limits[k].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
-				dcn2_1_soc.clock_limits[k].socclk_mhz = clk_table->entries[i].socclk_mhz;
-				dcn2_1_soc.clock_limits[k].dram_speed_mts = clk_table->entries[i].memclk_mhz * 2;
-
-				dcn2_1_soc.clock_limits[k].dispclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].dispclk_mhz;
-				dcn2_1_soc.clock_limits[k].dppclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].dppclk_mhz;
-				dcn2_1_soc.clock_limits[k].dram_bw_per_chan_gbps = dcn2_1_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps;
-				dcn2_1_soc.clock_limits[k].dscclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].dscclk_mhz;
-				dcn2_1_soc.clock_limits[k].dtbclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].dtbclk_mhz;
-				dcn2_1_soc.clock_limits[k].phyclk_d18_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz;
-				dcn2_1_soc.clock_limits[k].phyclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].phyclk_mhz;
-				k++;
-			}
+			clock_limits[i].state = i;
+			clock_limits[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
+			clock_limits[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
+			clock_limits[i].socclk_mhz = clk_table->entries[i].socclk_mhz;
+			clock_limits[i].dram_speed_mts = clk_table->entries[i].memclk_mhz * 2;
+
+			clock_limits[i].dispclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].dispclk_mhz;
+			clock_limits[i].dppclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].dppclk_mhz;
+			clock_limits[i].dram_bw_per_chan_gbps = dcn2_1_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps;
+			clock_limits[i].dscclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].dscclk_mhz;
+			clock_limits[i].dtbclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].dtbclk_mhz;
+			clock_limits[i].phyclk_d18_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz;
+			clock_limits[i].phyclk_mhz = dcn2_1_soc.clock_limits[closest_clk_lvl].phyclk_mhz;
+		}
+		for (i = 0; i < clk_table->num_entries; i++)
+			dcn2_1_soc.clock_limits[i] = clock_limits[i];
+		if (clk_table->num_entries) {
+			dcn2_1_soc.num_states = clk_table->num_entries;
+			/* duplicate last level */
+			dcn2_1_soc.clock_limits[dcn2_1_soc.num_states] = dcn2_1_soc.clock_limits[dcn2_1_soc.num_states - 1];
+			dcn2_1_soc.clock_limits[dcn2_1_soc.num_states].state = dcn2_1_soc.num_states;
 		}
-		dcn2_1_soc.num_states = k;
 	}
 
-	/* duplicate last level */
-	dcn2_1_soc.clock_limits[dcn2_1_soc.num_states] = dcn2_1_soc.clock_limits[dcn2_1_soc.num_states - 1];
-	dcn2_1_soc.clock_limits[dcn2_1_soc.num_states].state = dcn2_1_soc.num_states;
-
 	dml_init_instance(&dc->dml, &dcn2_1_soc, &dcn2_1_ip, DML_PROJECT_DCN21);
 }
 
@@ -1602,6 +1596,18 @@ static const struct dcn10_link_enc_registers link_enc_regs[] = {
 	link_regs(4, E),
 };
 
+static const struct dce_panel_cntl_registers panel_cntl_regs[] = {
+	{ DCN_PANEL_CNTL_REG_LIST() }
+};
+
+static const struct dce_panel_cntl_shift panel_cntl_shift = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(__SHIFT)
+};
+
+static const struct dce_panel_cntl_mask panel_cntl_mask = {
+	DCE_PANEL_CNTL_MASK_SH_LIST(_MASK)
+};
+
 #define aux_regs(id)\
 [id] = {\
 	DCN2_AUX_REG_LIST(id)\
@@ -1687,6 +1693,24 @@ static struct link_encoder *dcn21_link_encoder_create(
 
 	return &enc21->enc10.base;
 }
+
+static struct panel_cntl *dcn21_panel_cntl_create(const struct panel_cntl_init_data *init_data)
+{
+	struct dce_panel_cntl *panel_cntl =
+		kzalloc(sizeof(struct dce_panel_cntl), GFP_KERNEL);
+
+	if (!panel_cntl)
+		return NULL;
+
+	dce_panel_cntl_construct(panel_cntl,
+			init_data,
+			&panel_cntl_regs[init_data->inst],
+			&panel_cntl_shift,
+			&panel_cntl_mask);
+
+	return &panel_cntl->base;
+}
+
 #define CTX ctx
 
 #define REG(reg_name) \
@@ -1705,12 +1729,8 @@ static int dcn21_populate_dml_pipes_from_context(
 {
 	uint32_t pipe_cnt = dcn20_populate_dml_pipes_from_context(dc, context, pipes);
 	int i;
-	struct resource_context *res_ctx = &context->res_ctx;
-
-	for (i = 0; i < dc->res_pool->pipe_count; i++) {
 
-		if (!res_ctx->pipe_ctx[i].stream)
-			continue;
+	for (i = 0; i < pipe_cnt; i++) {
 
 		pipes[i].pipe.src.hostvm = 1;
 		pipes[i].pipe.src.gpuvm = 1;
@@ -1735,6 +1755,7 @@ enum dc_status dcn21_patch_unknown_plane_state(struct dc_plane_state *plane_stat
 static struct resource_funcs dcn21_res_pool_funcs = {
 	.destroy = dcn21_destroy_resource_pool,
 	.link_enc_create = dcn21_link_encoder_create,
+	.panel_cntl_create = dcn21_panel_cntl_create,
 	.validate_bandwidth = dcn21_validate_bandwidth,
 	.populate_dml_pipes = dcn21_populate_dml_pipes_from_context,
 	.add_stream_to_ctx = dcn20_add_stream_to_ctx,
@@ -1781,7 +1802,6 @@ static bool dcn21_resource_construct(
 	dc->caps.i2c_speed_in_khz = 100;
 	dc->caps.max_cursor_size = 256;
 	dc->caps.dmdata_alloc_size = 2048;
-	dc->caps.hw_3d_lut = true;
 
 	dc->caps.max_slave_planes = 1;
 	dc->caps.post_blend_color_processing = true;
@@ -1790,6 +1810,40 @@ static bool dcn21_resource_construct(
 	dc->caps.dmcub_support = true;
 	dc->caps.is_apu = true;
 
+	/* Color pipeline capabilities */
+	dc->caps.color.dpp.dcn_arch = 1;
+	dc->caps.color.dpp.input_lut_shared = 0;
+	dc->caps.color.dpp.icsc = 1;
+	dc->caps.color.dpp.dgam_ram = 1;
+	dc->caps.color.dpp.dgam_rom_caps.srgb = 1;
+	dc->caps.color.dpp.dgam_rom_caps.bt2020 = 1;
+	dc->caps.color.dpp.dgam_rom_caps.gamma2_2 = 0;
+	dc->caps.color.dpp.dgam_rom_caps.pq = 0;
+	dc->caps.color.dpp.dgam_rom_caps.hlg = 0;
+	dc->caps.color.dpp.post_csc = 0;
+	dc->caps.color.dpp.gamma_corr = 0;
+
+	dc->caps.color.dpp.hw_3d_lut = 1;
+	dc->caps.color.dpp.ogam_ram = 1;
+	// no OGAM ROM on DCN2
+	dc->caps.color.dpp.ogam_rom_caps.srgb = 0;
+	dc->caps.color.dpp.ogam_rom_caps.bt2020 = 0;
+	dc->caps.color.dpp.ogam_rom_caps.gamma2_2 = 0;
+	dc->caps.color.dpp.ogam_rom_caps.pq = 0;
+	dc->caps.color.dpp.ogam_rom_caps.hlg = 0;
+	dc->caps.color.dpp.ocsc = 0;
+
+	dc->caps.color.mpc.gamut_remap = 0;
+	dc->caps.color.mpc.num_3dluts = 0;
+	dc->caps.color.mpc.shared_3d_lut = 0;
+	dc->caps.color.mpc.ogam_ram = 1;
+	dc->caps.color.mpc.ogam_rom_caps.srgb = 0;
+	dc->caps.color.mpc.ogam_rom_caps.bt2020 = 0;
+	dc->caps.color.mpc.ogam_rom_caps.gamma2_2 = 0;
+	dc->caps.color.mpc.ogam_rom_caps.pq = 0;
+	dc->caps.color.mpc.ogam_rom_caps.hlg = 0;
+	dc->caps.color.mpc.ocsc = 1;
+
 	if (dc->ctx->dce_environment == DCE_ENV_PRODUCTION_DRV)
 		dc->debug = debug_defaults_drv;
 	else if (dc->ctx->dce_environment == DCE_ENV_FPGA_MAXIMUS) {
@@ -1842,17 +1896,19 @@ static bool dcn21_resource_construct(
 		goto create_fail;
 	}
 
-	pool->base.dmcu = dcn21_dmcu_create(ctx,
-			&dmcu_regs,
-			&dmcu_shift,
-			&dmcu_mask);
-	if (pool->base.dmcu == NULL) {
-		dm_error("DC: failed to create dmcu!\n");
-		BREAK_TO_DEBUGGER();
-		goto create_fail;
+	if (!dc->config.disable_dmcu) {
+		pool->base.dmcu = dcn21_dmcu_create(ctx,
+				&dmcu_regs,
+				&dmcu_shift,
+				&dmcu_mask);
+		if (pool->base.dmcu == NULL) {
+			dm_error("DC: failed to create dmcu!\n");
+			BREAK_TO_DEBUGGER();
+			goto create_fail;
+		}
 	}
 
-	if (dc->debug.disable_dmcu) {
+	if (dc->config.disable_dmcu) {
 		pool->base.psr = dmub_psr_create(ctx);
 
 		if (pool->base.psr == NULL) {
@@ -1862,15 +1918,16 @@ static bool dcn21_resource_construct(
 		}
 	}
 
-	pool->base.abm = dce_abm_create(ctx,
+	if (dc->config.disable_dmcu)
+		pool->base.abm = dmub_abm_create(ctx,
+			&abm_regs,
+			&abm_shift,
+			&abm_mask);
+	else
+		pool->base.abm = dce_abm_create(ctx,
 			&abm_regs,
 			&abm_shift,
 			&abm_mask);
-	if (pool->base.abm == NULL) {
-		dm_error("DC: failed to create abm!\n");
-		BREAK_TO_DEBUGGER();
-		goto create_fail;
-	}
 
 	pool->base.pp_smu = dcn21_pp_smu_create(ctx);
 
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c
index 5bbbafacc720..922ab7169e52 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c
@@ -2614,6 +2614,7 @@ static void dml20v2_DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndP
 
 	if (mode_lib->vba.DRAMClockChangeSupportsVActive &&
 			mode_lib->vba.MinActiveDRAMClockChangeMargin > 60) {
+		mode_lib->vba.DRAMClockChangeWatermark += 25;
 
 		for (k = 0; k < mode_lib->vba.NumberOfActivePlanes; ++k) {
 			if (mode_lib->vba.PrefetchMode[mode_lib->vba.VoltageLevel][mode_lib->vba.maxMpcComb] == 0) {
@@ -2622,7 +2623,7 @@ static void dml20v2_DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndP
 					mode_lib->vba.MinTTUVBlank[k] += 25;
 			}
 		}
-		mode_lib->vba.DRAMClockChangeWatermark += 25;
+
 		mode_lib->vba.DRAMClockChangeSupport[0][0] = dm_dram_clock_change_vactive;
 	} else if (mode_lib->vba.DummyPStateCheck &&
 			mode_lib->vba.MinActiveDRAMClockChangeMargin > 0) {
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c
index e6617c958bb8..5bc80b6084da 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c
@@ -5944,7 +5944,7 @@ static void CalculateMetaAndPTETimes(
 						* PixelPTEReqHeightY[k];
 			}
 			dpte_groups_per_row_luma_ub = dml_ceil(
-					dpte_row_width_luma_ub[k] / dpte_group_width_luma,
+					(float) dpte_row_width_luma_ub[k] / dpte_group_width_luma,
 					1);
 			time_per_pte_group_nom_luma[k] = DST_Y_PER_PTE_ROW_NOM_L[k] * HTotal[k]
 					/ PixelClock[k] / dpte_groups_per_row_luma_ub;
@@ -5968,7 +5968,7 @@ static void CalculateMetaAndPTETimes(
 							* PixelPTEReqHeightC[k];
 				}
 				dpte_groups_per_row_chroma_ub = dml_ceil(
-						dpte_row_width_chroma_ub[k]
+						(float) dpte_row_width_chroma_ub[k]
 								/ dpte_group_width_chroma,
 						1);
 				time_per_pte_group_nom_chroma[k] = DST_Y_PER_PTE_ROW_NOM_C[k]
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c
index a38baa73d484..193f31b8ac4a 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c
@@ -1490,19 +1490,30 @@ static void dml_rq_dlg_get_dlg_params(
 	disp_dlg_regs->refcyc_per_pte_group_vblank_l =
 			(unsigned int) (dst_y_per_row_vblank * (double) htotal
 					* ref_freq_to_pix_freq / (double) dpte_groups_per_row_ub_l);
-	ASSERT(disp_dlg_regs->refcyc_per_pte_group_vblank_l < (unsigned int)dml_pow(2, 13));
+	if ((refclk_freq_in_mhz / ref_freq_to_pix_freq < 28) &&
+			disp_dlg_regs->refcyc_per_pte_group_vblank_l >= (unsigned int)dml_pow(2, 13))
+		disp_dlg_regs->refcyc_per_pte_group_vblank_l = (1 << 13) - 1;
+	else
+		ASSERT(disp_dlg_regs->refcyc_per_pte_group_vblank_l < (unsigned int)dml_pow(2, 13));
 
 	if (dual_plane) {
 		disp_dlg_regs->refcyc_per_pte_group_vblank_c = (unsigned int) (dst_y_per_row_vblank
 				* (double) htotal * ref_freq_to_pix_freq
 				/ (double) dpte_groups_per_row_ub_c);
-		ASSERT(disp_dlg_regs->refcyc_per_pte_group_vblank_c
+		if ((refclk_freq_in_mhz / ref_freq_to_pix_freq < 28) &&
+				disp_dlg_regs->refcyc_per_pte_group_vblank_c >= (unsigned int)dml_pow(2, 13))
+			disp_dlg_regs->refcyc_per_pte_group_vblank_c = (1 << 13) - 1;
+		else
+			ASSERT(disp_dlg_regs->refcyc_per_pte_group_vblank_c
 				< (unsigned int)dml_pow(2, 13));
 	}
 
-	disp_dlg_regs->refcyc_per_meta_chunk_vblank_l =
+	if (src->dcc)
+		disp_dlg_regs->refcyc_per_meta_chunk_vblank_l =
 			(unsigned int) (dst_y_per_row_vblank * (double) htotal
 					* ref_freq_to_pix_freq / (double) meta_chunks_per_row_ub_l);
+	else
+		disp_dlg_regs->refcyc_per_meta_chunk_vblank_l = 0;
 	ASSERT(disp_dlg_regs->refcyc_per_meta_chunk_vblank_l < (unsigned int)dml_pow(2, 13));
 
 	disp_dlg_regs->refcyc_per_meta_chunk_vblank_c =
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h b/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
index 687010c17324..b2ecb174a93f 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
@@ -121,6 +121,7 @@ struct _vcs_dpi_soc_bounding_box_st {
 };
 
 struct _vcs_dpi_ip_params_st {
+	bool use_min_dcfclk;
 	bool gpuvm_enable;
 	bool hostvm_enable;
 	unsigned int gpuvm_max_page_table_levels;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c b/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c
index 6b525c52124c..6e4e8a452e66 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c
@@ -280,6 +280,7 @@ static void fetch_ip_params(struct display_mode_lib *mode_lib)
 	ip_params_st *ip = &mode_lib->vba.ip;
 
 	// IP Parameters
+	mode_lib->vba.UseMinimumRequiredDCFCLK = ip->use_min_dcfclk;
 	mode_lib->vba.MaxNumDPP = ip->max_num_dpp;
 	mode_lib->vba.MaxNumOTG = ip->max_num_otg;
 	mode_lib->vba.MaxNumHDMIFRLOutputs = ip->max_num_hdmi_frl_outputs;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.h b/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.h
index 5d82fc5a7ed7..a1884ffe63ae 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.h
@@ -898,6 +898,7 @@ struct vba_vars_st {
 	bool dummystring[DC__NUM_DPP__MAX];
 	double BPP;
 	enum odm_combine_policy ODMCombinePolicy;
+	bool UseMinimumRequiredDCFCLK;
 };
 
 bool CalculateMinAndMaxPrefetchMode(
diff --git a/drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c b/drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c
index 6f730b5bfe42..5e384a8a83dc 100644
--- a/drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c
+++ b/drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c
@@ -322,3 +322,92 @@ static const struct protection_properties dp_11_protection = {
 	.process_transaction = dp_11_process_transaction
 };
 
+static const struct protection_properties *get_protection_properties_by_signal(
+	struct dc_link *link,
+	enum signal_type st,
+	enum hdcp_version version)
+{
+	switch (version) {
+	case HDCP_VERSION_14:
+		switch (st) {
+		case SIGNAL_TYPE_DVI_SINGLE_LINK:
+		case SIGNAL_TYPE_DVI_DUAL_LINK:
+		case SIGNAL_TYPE_HDMI_TYPE_A:
+			return &hdmi_14_protection;
+		case SIGNAL_TYPE_DISPLAY_PORT:
+			if (link &&
+				(link->dpcd_caps.dongle_type == DISPLAY_DONGLE_DP_VGA_CONVERTER ||
+				link->dpcd_caps.dongle_caps.dongle_type == DISPLAY_DONGLE_DP_VGA_CONVERTER)) {
+				return &non_supported_protection;
+			}
+			return &dp_11_protection;
+		case SIGNAL_TYPE_DISPLAY_PORT_MST:
+		case SIGNAL_TYPE_EDP:
+			return &dp_11_protection;
+		default:
+			return &non_supported_protection;
+		}
+		break;
+	case HDCP_VERSION_22:
+		switch (st) {
+		case SIGNAL_TYPE_DVI_SINGLE_LINK:
+		case SIGNAL_TYPE_DVI_DUAL_LINK:
+		case SIGNAL_TYPE_HDMI_TYPE_A:
+			return &hdmi_14_protection; //todo version2.2
+		case SIGNAL_TYPE_DISPLAY_PORT:
+		case SIGNAL_TYPE_DISPLAY_PORT_MST:
+		case SIGNAL_TYPE_EDP:
+			return &dp_11_protection;  //todo version2.2
+		default:
+			return &non_supported_protection;
+		}
+		break;
+	default:
+		return &non_supported_protection;
+	}
+}
+
+enum hdcp_message_status dc_process_hdcp_msg(
+	enum signal_type signal,
+	struct dc_link *link,
+	struct hdcp_protection_message *message_info)
+{
+	enum hdcp_message_status status = HDCP_MESSAGE_FAILURE;
+	uint32_t i = 0;
+
+	const struct protection_properties *protection_props;
+
+	if (!message_info)
+		return HDCP_MESSAGE_UNSUPPORTED;
+
+	if (message_info->msg_id < HDCP_MESSAGE_ID_READ_BKSV ||
+		message_info->msg_id >= HDCP_MESSAGE_ID_MAX)
+		return HDCP_MESSAGE_UNSUPPORTED;
+
+	protection_props =
+		get_protection_properties_by_signal(
+			link,
+			signal,
+			message_info->version);
+
+	if (!protection_props->supported)
+		return HDCP_MESSAGE_UNSUPPORTED;
+
+	if (protection_props->process_transaction(
+		link,
+		message_info)) {
+		status = HDCP_MESSAGE_SUCCESS;
+	} else {
+		for (i = 0; i < message_info->max_retries; i++) {
+			if (protection_props->process_transaction(
+						link,
+						message_info)) {
+				status = HDCP_MESSAGE_SUCCESS;
+				break;
+			}
+		}
+	}
+
+	return status;
+}
+
diff --git a/drivers/gpu/drm/amd/display/dc/inc/core_types.h b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
index d523fc9547e7..c7fd702a4a87 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/core_types.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
@@ -38,6 +38,7 @@
 #endif
 #include "dwb.h"
 #include "mcif_wb.h"
+#include "panel_cntl.h"
 
 #define MAX_CLOCK_SOURCES 7
 
@@ -92,6 +93,8 @@ struct clk_bw_params;
 struct resource_funcs {
 	void (*destroy)(struct resource_pool **pool);
 	void (*link_init)(struct dc_link *link);
+	struct panel_cntl*(*panel_cntl_create)(
+		const struct panel_cntl_init_data *panel_cntl_init_data);
 	struct link_encoder *(*link_enc_create)(
 			const struct encoder_init_data *init);
 	bool (*validate_bandwidth)(
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/abm.h b/drivers/gpu/drm/amd/display/dc/inc/hw/abm.h
index d607b3191954..91a42f0f1fc4 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/abm.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/abm.h
@@ -45,8 +45,8 @@ struct abm {
 struct abm_funcs {
 	void (*abm_init)(struct abm *abm);
 	bool (*set_abm_level)(struct abm *abm, unsigned int abm_level);
-	bool (*set_abm_immediate_disable)(struct abm *abm);
-	bool (*set_pipe)(struct abm *abm, unsigned int controller_id);
+	bool (*set_abm_immediate_disable)(struct abm *abm, unsigned int panel_inst);
+	bool (*set_pipe)(struct abm *abm, unsigned int controller_id, unsigned int panel_inst);
 	bool (*init_backlight)(struct abm *abm);
 
 	/* backlight_pwm_u16_16 is unsigned 32 bit,
@@ -56,10 +56,14 @@ struct abm_funcs {
 			unsigned int backlight_pwm_u16_16,
 			unsigned int frame_ramp,
 			unsigned int controller_id,
-			bool use_smooth_brightness);
+			unsigned int panel_inst,
+			bool fw_set_brightness);
 
 	unsigned int (*get_current_backlight)(struct abm *abm);
 	unsigned int (*get_target_backlight)(struct abm *abm);
+	bool (*init_abm_config)(struct abm *abm,
+			const char *src,
+			unsigned int bytes);
 };
 
 #endif
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h b/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h
index f5dd0cc73c63..47a566d82d6e 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h
@@ -144,6 +144,8 @@ struct hubbub_funcs {
 	void (*allow_self_refresh_control)(struct hubbub *hubbub, bool allow);
 
 	void (*apply_DEDCN21_147_wa)(struct hubbub *hubbub);
+
+	void (*force_wm_propagate_to_pipes)(struct hubbub *hubbub);
 };
 
 struct hubbub {
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h b/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
index 094afc4c8173..50ee8aa7ec3b 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
@@ -210,6 +210,22 @@ struct mpc_funcs {
 		struct mpcc_blnd_cfg *blnd_cfg,
 		int mpcc_id);
 
+	/*
+	 * Lock cursor updates for the specified OPP.
+	 * OPP defines the set of MPCC that are locked together for cursor.
+	 *
+	 * Parameters:
+	 * [in] 	mpc		- MPC context.
+	 * [in]     opp_id	- The OPP to lock cursor updates on
+	 * [in]		lock	- lock/unlock the OPP
+	 *
+	 * Return:  void
+	 */
+	void (*cursor_lock)(
+			struct mpc *mpc,
+			int opp_id,
+			bool lock);
+
 	struct mpcc* (*get_mpcc_for_dpp)(
 			struct mpc_tree *tree,
 			int dpp_id);
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h b/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h
new file mode 100644
index 000000000000..5a75d035f1fa
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2017 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+/*
+ * panel_cntl.h
+ *
+ *  Created on: Oct 6, 2015
+ *      Author: yonsun
+ */
+
+#ifndef DC_PANEL_CNTL_H_
+#define DC_PANEL_CNTL_H_
+
+#include "dc_types.h"
+
+struct panel_cntl_funcs {
+	void (*destroy)(struct panel_cntl **panel_cntl);
+	void (*hw_init)(struct panel_cntl *panel_cntl);
+	bool (*is_panel_backlight_on)(struct panel_cntl *panel_cntl);
+	bool (*is_panel_powered_on)(struct panel_cntl *panel_cntl);
+};
+
+struct panel_cntl_init_data {
+	struct dc_context *ctx;
+	uint32_t inst;
+};
+
+struct panel_cntl {
+	const struct panel_cntl_funcs *funcs;
+	struct dc_context *ctx;
+	uint32_t inst;
+};
+
+#endif /* DC_PANEL_CNTL_H_ */
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
index e5e7d94026fc..f803191e3134 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
@@ -117,6 +117,9 @@ struct crc_params {
 
 	enum crc_selection selection;
 
+	uint8_t dsc_mode;
+	uint8_t odm_mode;
+
 	bool continuous_mode;
 	bool enable;
 };
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h b/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h
index fecc80c47c26..2947d1b15512 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h
@@ -173,6 +173,8 @@ struct scaler_data {
 	struct scaling_taps taps;
 	struct rect viewport;
 	struct rect viewport_c;
+	struct rect viewport_unadjusted;
+	struct rect viewport_c_unadjusted;
 	struct rect recout;
 	struct scaling_ratios ratios;
 	struct scl_inits inits;
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h
index d4c1fb242c63..1570fed20de0 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h
@@ -75,9 +75,13 @@ struct hw_sequencer_funcs {
 	void (*wait_for_mpcc_disconnect)(struct dc *dc,
 			struct resource_pool *res_pool,
 			struct pipe_ctx *pipe_ctx);
+	void (*edp_backlight_control)(
+			struct dc_link *link,
+			bool enable);
 	void (*program_triplebuffer)(const struct dc *dc,
 		struct pipe_ctx *pipe_ctx, bool enableTripleBuffer);
 	void (*update_pending_status)(struct pipe_ctx *pipe_ctx);
+	void (*power_down)(struct dc *dc);
 
 	/* Pipe Lock Related */
 	void (*pipe_control_lock)(struct dc *dc,
@@ -86,6 +90,7 @@ struct hw_sequencer_funcs {
 			struct dc_state *context, bool lock);
 	void (*set_flip_control_gsl)(struct pipe_ctx *pipe_ctx,
 			bool flip_immediate);
+	void (*cursor_lock)(struct dc *dc, struct pipe_ctx *pipe, bool lock);
 
 	/* Timing Related */
 	void (*get_position)(struct pipe_ctx **pipe_ctx, int num_pipes,
@@ -187,6 +192,10 @@ struct hw_sequencer_funcs {
 			unsigned int bufSize, unsigned int mask);
 	void (*clear_status_bits)(struct dc *dc, unsigned int mask);
 
+	bool (*set_backlight_level)(struct pipe_ctx *pipe_ctx,
+			uint32_t backlight_pwm_u16_16,
+			uint32_t frame_ramp);
+
 
 };
 
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h
index 52a26e6be066..36e906bb6bfc 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h
@@ -100,8 +100,6 @@ struct hwseq_private_funcs {
 			struct dc *dc);
 	void (*edp_backlight_control)(struct dc_link *link,
 			bool enable);
-	bool (*is_panel_backlight_on)(struct dc_link *link);
-	bool (*is_panel_powered_on)(struct dc_link *link);
 	void (*setup_vupdate_interrupt)(struct dc *dc,
 			struct pipe_ctx *pipe_ctx);
 	bool (*did_underflow_occur)(struct dc *dc, struct pipe_ctx *pipe_ctx);
diff --git a/drivers/gpu/drm/amd/display/dc/virtual/virtual_link_encoder.c b/drivers/gpu/drm/amd/display/dc/virtual/virtual_link_encoder.c
index 3464b2d5b89a..348e9a600a72 100644
--- a/drivers/gpu/drm/amd/display/dc/virtual/virtual_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/virtual/virtual_link_encoder.c
@@ -84,6 +84,14 @@ static void virtual_link_encoder_destroy(struct link_encoder **enc)
 	*enc = NULL;
 }
 
+static void virtual_link_encoder_get_max_link_cap(struct link_encoder *enc,
+		struct dc_link_settings *link_settings)
+{
+	/* Set Default link settings */
+	struct dc_link_settings max_link_cap = {LANE_COUNT_FOUR, LINK_RATE_HIGH,
+				LINK_SPREAD_05_DOWNSPREAD_30KHZ, false, 0};
+	*link_settings = max_link_cap;
+}
 
 static const struct link_encoder_funcs virtual_lnk_enc_funcs = {
 	.validate_output_with_stream =
@@ -94,6 +102,7 @@ static const struct link_encoder_funcs virtual_lnk_enc_funcs = {
 	.enable_dp_output = virtual_link_encoder_enable_dp_output,
 	.enable_dp_mst_output = virtual_link_encoder_enable_dp_mst_output,
 	.disable_output = virtual_link_encoder_disable_output,
+	.get_max_link_cap = virtual_link_encoder_get_max_link_cap,
 	.dp_set_lane_settings = virtual_link_encoder_dp_set_lane_settings,
 	.dp_set_phy_pattern = virtual_link_encoder_dp_set_phy_pattern,
 	.update_mst_stream_allocation_table =
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
index 10b5fa9d2588..eb10518dc058 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
@@ -228,6 +228,7 @@ struct dmub_cmd_psr_copy_settings_data {
 	uint8_t smu_optimizations_en;
 	uint8_t frame_delay;
 	uint8_t frame_cap_ind;
+	struct dmub_psr_debug_flags debug;
 };
 
 struct dmub_rb_cmd_psr_copy_settings {
@@ -260,6 +261,7 @@ struct dmub_rb_cmd_psr_set_version {
 struct dmub_cmd_abm_set_pipe_data {
 	uint32_t ramping_boundary;
 	uint32_t otg_inst;
+	uint32_t panel_inst;
 };
 
 struct dmub_rb_cmd_abm_set_pipe {
@@ -303,6 +305,16 @@ struct dmub_rb_cmd_abm_set_pwm_frac {
 	struct dmub_cmd_abm_set_pwm_frac_data abm_set_pwm_frac_data;
 };
 
+struct dmub_cmd_abm_init_config_data {
+	union dmub_addr src;
+	uint16_t bytes;
+};
+
+struct dmub_rb_cmd_abm_init_config {
+	struct dmub_cmd_header header;
+	struct dmub_cmd_abm_init_config_data abm_init_config_data;
+};
+
 union dmub_rb_cmd {
 	struct dmub_rb_cmd_read_modify_write read_modify_write;
 	struct dmub_rb_cmd_reg_field_update_sequence reg_field_update_seq;
@@ -324,6 +336,7 @@ union dmub_rb_cmd {
 	struct dmub_rb_cmd_abm_set_level abm_set_level;
 	struct dmub_rb_cmd_abm_set_ambient_level abm_set_ambient_level;
 	struct dmub_rb_cmd_abm_set_pwm_frac abm_set_pwm_frac;
+	struct dmub_rb_cmd_abm_init_config abm_init_config;
 };
 
 #pragma pack(pop)
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd_dal.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd_dal.h
index d37535d21928..e42de9ded275 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd_dal.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd_dal.h
@@ -32,17 +32,16 @@
  */
 
 enum dmub_cmd_psr_type {
-	DMUB_CMD__PSR_SET_VERSION	= 0,
-	DMUB_CMD__PSR_COPY_SETTINGS	= 1,
-	DMUB_CMD__PSR_ENABLE		= 2,
-	DMUB_CMD__PSR_DISABLE		= 3,
-	DMUB_CMD__PSR_SET_LEVEL		= 4,
+	DMUB_CMD__PSR_SET_VERSION		= 0,
+	DMUB_CMD__PSR_COPY_SETTINGS		= 1,
+	DMUB_CMD__PSR_ENABLE			= 2,
+	DMUB_CMD__PSR_DISABLE			= 3,
+	DMUB_CMD__PSR_SET_LEVEL			= 4,
 };
 
 enum psr_version {
-	PSR_VERSION_1			= 0x10, // PSR Version 1
-	PSR_VERSION_2			= 0x20, // PSR Version 2, includes selective update
-	PSR_VERSION_2_1			= 0x21, // PSR Version 2, includes Y-coordinate support for SU
+	PSR_VERSION_1				= 0,
+	PSR_VERSION_UNSUPPORTED			= 0xFFFFFFFF,
 };
 
 enum dmub_cmd_abm_type {
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_rb.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_rb.h
index df875fdd2ab0..2ae48c18bb5b 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_rb.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_rb.h
@@ -33,8 +33,6 @@
 extern "C" {
 #endif
 
-struct dmub_cmd_header;
-
 struct dmub_rb_init_params {
 	void *ctx;
 	void *base_address;
@@ -71,7 +69,7 @@ static inline bool dmub_rb_full(struct dmub_rb *rb)
 }
 
 static inline bool dmub_rb_push_front(struct dmub_rb *rb,
-				      const struct dmub_cmd_header *cmd)
+				      const union dmub_rb_cmd *cmd)
 {
 	uint64_t volatile *dst = (uint64_t volatile *)(rb->base_address) + rb->wrpt / sizeof(uint64_t);
 	const uint64_t *src = (const uint64_t *)cmd;
@@ -93,7 +91,7 @@ static inline bool dmub_rb_push_front(struct dmub_rb *rb,
 }
 
 static inline bool dmub_rb_front(struct dmub_rb *rb,
-				 struct dmub_cmd_header *cmd)
+				 union dmub_rb_cmd  *cmd)
 {
 	uint8_t *rd_ptr = (uint8_t *)rb->base_address + rb->rptr;
 
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_srv.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_srv.h
index c2671f2616c8..9f10bfe3d2df 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_srv.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_srv.h
@@ -75,7 +75,6 @@ extern "C" {
 
 /* Forward declarations */
 struct dmub_srv;
-struct dmub_cmd_header;
 struct dmub_srv_common_regs;
 
 /* enum dmub_status - return code for dmcub functions */
@@ -151,6 +150,7 @@ struct dmub_srv_region_params {
 	uint32_t inst_const_size;
 	uint32_t bss_data_size;
 	uint32_t vbios_size;
+	const uint8_t *fw_inst_const;
 	const uint8_t *fw_bss_data;
 };
 
@@ -457,7 +457,7 @@ enum dmub_status dmub_srv_hw_reset(struct dmub_srv *dmub);
  *   DMUB_STATUS_INVALID - unspecified error
  */
 enum dmub_status dmub_srv_cmd_queue(struct dmub_srv *dmub,
-				    const struct dmub_cmd_header *cmd);
+				    const union dmub_rb_cmd *cmd);
 
 /**
  * dmub_srv_cmd_execute() - Executes a queued sequence to the dmub
@@ -565,6 +565,16 @@ dmub_srv_send_gpint_command(struct dmub_srv *dmub,
 enum dmub_status dmub_srv_get_gpint_response(struct dmub_srv *dmub,
 					     uint32_t *response);
 
+/**
+ * dmub_flush_buffer_mem() - Read back entire frame buffer region.
+ * This ensures that the write from x86 has been flushed and will not
+ * hang the DMCUB.
+ * @fb: frame buffer to flush
+ *
+ * Can be called after software initialization.
+ */
+void dmub_flush_buffer_mem(const struct dmub_fb *fb);
+
 #if defined(__cplusplus)
 }
 #endif
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_types.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_types.h
index 41d524b0db2f..bed5b023a396 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_types.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_types.h
@@ -49,6 +49,12 @@ extern "C" {
 #define dmub_udelay(microseconds) udelay(microseconds)
 #endif
 
+/* Maximum number of streams on any ASIC. */
+#define DMUB_MAX_STREAMS 6
+
+/* Maximum number of planes on any ASIC. */
+#define DMUB_MAX_PLANES 6
+
 union dmub_addr {
 	struct {
 		uint32_t low_part;
@@ -57,6 +63,11 @@ union dmub_addr {
 	uint64_t quad_part;
 };
 
+struct dmub_psr_debug_flags {
+	uint8_t visual_confirm : 1;
+	uint8_t reserved : 7;
+};
+
 #if defined(__cplusplus)
 }
 #endif
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c
index 63bb9e2c81de..45638d61b73d 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c
@@ -186,14 +186,22 @@ void dmub_dcn20_setup_windows(struct dmub_srv *dmub,
 
 	dmub_dcn20_get_fb_base_offset(dmub, &fb_base, &fb_offset);
 
-	dmub_dcn20_translate_addr(&cw2->offset, fb_base, fb_offset, &offset);
-
-	REG_WRITE(DMCUB_REGION3_CW2_OFFSET, offset.u.low_part);
-	REG_WRITE(DMCUB_REGION3_CW2_OFFSET_HIGH, offset.u.high_part);
-	REG_WRITE(DMCUB_REGION3_CW2_BASE_ADDRESS, cw2->region.base);
-	REG_SET_2(DMCUB_REGION3_CW2_TOP_ADDRESS, 0,
-		  DMCUB_REGION3_CW2_TOP_ADDRESS, cw2->region.top,
-		  DMCUB_REGION3_CW2_ENABLE, 1);
+	if (cw2->region.base != cw2->region.top) {
+		dmub_dcn20_translate_addr(&cw2->offset, fb_base, fb_offset,
+					  &offset);
+
+		REG_WRITE(DMCUB_REGION3_CW2_OFFSET, offset.u.low_part);
+		REG_WRITE(DMCUB_REGION3_CW2_OFFSET_HIGH, offset.u.high_part);
+		REG_WRITE(DMCUB_REGION3_CW2_BASE_ADDRESS, cw2->region.base);
+		REG_SET_2(DMCUB_REGION3_CW2_TOP_ADDRESS, 0,
+			  DMCUB_REGION3_CW2_TOP_ADDRESS, cw2->region.top,
+			  DMCUB_REGION3_CW2_ENABLE, 1);
+	} else {
+		REG_WRITE(DMCUB_REGION3_CW2_OFFSET, 0);
+		REG_WRITE(DMCUB_REGION3_CW2_OFFSET_HIGH, 0);
+		REG_WRITE(DMCUB_REGION3_CW2_BASE_ADDRESS, 0);
+		REG_WRITE(DMCUB_REGION3_CW2_TOP_ADDRESS, 0);
+	}
 
 	dmub_dcn20_translate_addr(&cw3->offset, fb_base, fb_offset, &offset);
 
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
index ce32cc7933c4..66ba0b2d80d2 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
@@ -70,7 +70,7 @@ static inline uint32_t dmub_align(uint32_t val, uint32_t factor)
 	return (val + factor - 1) / factor * factor;
 }
 
-static void dmub_flush_buffer_mem(const struct dmub_fb *fb)
+void dmub_flush_buffer_mem(const struct dmub_fb *fb)
 {
 	const uint8_t *base = (const uint8_t *)fb->cpu_addr;
 	uint8_t buf[64];
@@ -91,18 +91,32 @@ static void dmub_flush_buffer_mem(const struct dmub_fb *fb)
 }
 
 static const struct dmub_fw_meta_info *
-dmub_get_fw_meta_info(const uint8_t *fw_bss_data, uint32_t fw_bss_data_size)
+dmub_get_fw_meta_info(const struct dmub_srv_region_params *params)
 {
 	const union dmub_fw_meta *meta;
+	const uint8_t *blob = NULL;
+	uint32_t blob_size = 0;
+	uint32_t meta_offset = 0;
+
+	if (params->fw_bss_data) {
+		/* Legacy metadata region. */
+		blob = params->fw_bss_data;
+		blob_size = params->bss_data_size;
+		meta_offset = DMUB_FW_META_OFFSET;
+	} else if (params->fw_inst_const) {
+		/* Combined metadata region. */
+		blob = params->fw_inst_const;
+		blob_size = params->inst_const_size;
+		meta_offset = 0;
+	}
 
-	if (fw_bss_data == NULL)
+	if (!blob || !blob_size)
 		return NULL;
 
-	if (fw_bss_data_size < sizeof(union dmub_fw_meta) + DMUB_FW_META_OFFSET)
+	if (blob_size < sizeof(union dmub_fw_meta) + meta_offset)
 		return NULL;
 
-	meta = (const union dmub_fw_meta *)(fw_bss_data + fw_bss_data_size -
-					    DMUB_FW_META_OFFSET -
+	meta = (const union dmub_fw_meta *)(blob + blob_size - meta_offset -
 					    sizeof(union dmub_fw_meta));
 
 	if (meta->info.magic_value != DMUB_FW_META_MAGIC)
@@ -247,8 +261,7 @@ dmub_srv_calc_region_info(struct dmub_srv *dmub,
 	mail->base = dmub_align(bios->top, 256);
 	mail->top = mail->base + DMUB_MAILBOX_SIZE;
 
-	fw_info = dmub_get_fw_meta_info(params->fw_bss_data,
-					params->bss_data_size);
+	fw_info = dmub_get_fw_meta_info(params);
 
 	if (fw_info) {
 		fw_state_size = fw_info->fw_region_size;
@@ -449,7 +462,7 @@ enum dmub_status dmub_srv_hw_reset(struct dmub_srv *dmub)
 }
 
 enum dmub_status dmub_srv_cmd_queue(struct dmub_srv *dmub,
-				    const struct dmub_cmd_header *cmd)
+				    const union dmub_rb_cmd *cmd)
 {
 	if (!dmub->hw_init)
 		return DMUB_STATUS_INVALID;
diff --git a/drivers/gpu/drm/amd/display/include/hdcp_types.h b/drivers/gpu/drm/amd/display/include/hdcp_types.h
index f31e6befc8d6..42229b4effdc 100644
--- a/drivers/gpu/drm/amd/display/include/hdcp_types.h
+++ b/drivers/gpu/drm/amd/display/include/hdcp_types.h
@@ -83,6 +83,12 @@ enum hdcp_link {
 	HDCP_LINK_SECONDARY
 };
 
+enum hdcp_message_status {
+	HDCP_MESSAGE_SUCCESS,
+	HDCP_MESSAGE_FAILURE,
+	HDCP_MESSAGE_UNSUPPORTED
+};
+
 struct hdcp_protection_message {
 	enum hdcp_version version;
 	/* relevant only for DVI */
@@ -91,6 +97,7 @@ struct hdcp_protection_message {
 	uint32_t length;
 	uint8_t max_retries;
 	uint8_t *data;
+	enum hdcp_message_status status;
 };
 
 #endif
diff --git a/drivers/gpu/drm/amd/display/include/logger_interface.h b/drivers/gpu/drm/amd/display/include/logger_interface.h
index 6e008de25629..02c23b04d34b 100644
--- a/drivers/gpu/drm/amd/display/include/logger_interface.h
+++ b/drivers/gpu/drm/amd/display/include/logger_interface.h
@@ -40,8 +40,6 @@ struct dc_state;
  *
  */
 
-void dc_conn_log_hex_linux(const uint8_t *hex_data, int hex_data_count);
-
 void pre_surface_trace(
 		struct dc *dc,
 		const struct dc_plane_state *const *plane_states,
@@ -102,14 +100,12 @@ void context_clock_trace(
 #define CONN_DATA_DETECT(link, hex_data, hex_len, ...) \
 		do { \
 			(void)(link); \
-			dc_conn_log_hex_linux(hex_data, hex_len); \
 			DC_LOG_EVENT_DETECTION(__VA_ARGS__); \
 		} while (0)
 
 #define CONN_DATA_LINK_LOSS(link, hex_data, hex_len, ...) \
 		do { \
 			(void)(link); \
-			dc_conn_log_hex_linux(hex_data, hex_len); \
 			DC_LOG_EVENT_LINK_LOSS(__VA_ARGS__); \
 		} while (0)
 
diff --git a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c
index cac09d500fda..9431b48aecb4 100644
--- a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c
+++ b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c
@@ -1782,7 +1782,8 @@ bool calculate_user_regamma_ramp(struct dc_transfer_func *output_tf,
 	return ret;
 }
 
-bool mod_color_calculate_degamma_params(struct dc_transfer_func *input_tf,
+bool mod_color_calculate_degamma_params(struct dc_color_caps *dc_caps,
+		struct dc_transfer_func *input_tf,
 		const struct dc_gamma *ramp, bool mapUserRamp)
 {
 	struct dc_transfer_func_distributed_points *tf_pts = &input_tf->tf_pts;
@@ -1801,11 +1802,29 @@ bool mod_color_calculate_degamma_params(struct dc_transfer_func *input_tf,
 	/* we can use hardcoded curve for plain SRGB TF
 	 * If linear, it's bypass if on user ramp
 	 */
-	if (input_tf->type == TF_TYPE_PREDEFINED &&
-			(input_tf->tf == TRANSFER_FUNCTION_SRGB ||
-					input_tf->tf == TRANSFER_FUNCTION_LINEAR) &&
-					!mapUserRamp)
-		return true;
+	if (input_tf->type == TF_TYPE_PREDEFINED) {
+		if ((input_tf->tf == TRANSFER_FUNCTION_SRGB ||
+				input_tf->tf == TRANSFER_FUNCTION_LINEAR) &&
+				!mapUserRamp)
+			return true;
+
+		if (dc_caps != NULL &&
+			dc_caps->dpp.dcn_arch == 1) {
+
+			if (input_tf->tf == TRANSFER_FUNCTION_PQ &&
+					dc_caps->dpp.dgam_rom_caps.pq == 1)
+				return true;
+
+			if (input_tf->tf == TRANSFER_FUNCTION_GAMMA22 &&
+					dc_caps->dpp.dgam_rom_caps.gamma2_2 == 1)
+				return true;
+
+			// HLG OOTF not accounted for
+			if (input_tf->tf == TRANSFER_FUNCTION_HLG &&
+					dc_caps->dpp.dgam_rom_caps.hlg == 1)
+				return true;
+		}
+	}
 
 	input_tf->type = TF_TYPE_DISTRIBUTED_POINTS;
 
@@ -1902,7 +1921,7 @@ bool mod_color_calculate_degamma_params(struct dc_transfer_func *input_tf,
 
 
 
-	if (ramp->type == GAMMA_CUSTOM)
+	if (ramp && ramp->type == GAMMA_CUSTOM)
 		apply_lut_1d(ramp, MAX_HW_POINTS, tf_pts);
 
 	ret = true;
diff --git a/drivers/gpu/drm/amd/display/modules/color/color_gamma.h b/drivers/gpu/drm/amd/display/modules/color/color_gamma.h
index 9994817a9a03..7f56226ba77a 100644
--- a/drivers/gpu/drm/amd/display/modules/color/color_gamma.h
+++ b/drivers/gpu/drm/amd/display/modules/color/color_gamma.h
@@ -30,6 +30,7 @@ struct dc_transfer_func;
 struct dc_gamma;
 struct dc_transfer_func_distributed_points;
 struct dc_rgb_fixed;
+struct dc_color_caps;
 enum dc_transfer_func_predefined;
 
 /* For SetRegamma ADL interface support
@@ -100,7 +101,8 @@ bool mod_color_calculate_regamma_params(struct dc_transfer_func *output_tf,
 		const struct dc_gamma *ramp, bool mapUserRamp, bool canRomBeUsed,
 		const struct freesync_hdr_tf_params *fs_params);
 
-bool mod_color_calculate_degamma_params(struct dc_transfer_func *output_tf,
+bool mod_color_calculate_degamma_params(struct dc_color_caps *dc_caps,
+		struct dc_transfer_func *output_tf,
 		const struct dc_gamma *ramp, bool mapUserRamp);
 
 bool mod_color_calculate_degamma_curve(enum dc_transfer_func_predefined trans,
diff --git a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
index c33454a9e0b4..eb7421e83b86 100644
--- a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
+++ b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
@@ -443,7 +443,7 @@ static bool vrr_settings_require_update(struct core_freesync *core_freesync,
 		return true;
 	} else if (in_vrr->state == VRR_STATE_ACTIVE_FIXED &&
 			in_vrr->fixed.target_refresh_in_uhz !=
-					in_config->min_refresh_in_uhz) {
+					in_config->fixed_refresh_in_uhz) {
 		return true;
 	} else if (in_vrr->min_refresh_in_uhz != min_refresh_in_uhz) {
 		return true;
@@ -491,7 +491,7 @@ bool mod_freesync_get_v_position(struct mod_freesync *mod_freesync,
 	return false;
 }
 
-static void build_vrr_infopacket_data(const struct mod_vrr_params *vrr,
+static void build_vrr_infopacket_data_v1(const struct mod_vrr_params *vrr,
 		struct dc_info_packet *infopacket)
 {
 	/* PB1 = 0x1A (24bit AMD IEEE OUI (0x00001A) - Byte 0) */
@@ -523,14 +523,74 @@ static void build_vrr_infopacket_data(const struct mod_vrr_params *vrr,
 			vrr->state == VRR_STATE_ACTIVE_FIXED)
 		infopacket->sb[6] |= 0x04;
 
+	// For v1 & 2 infoframes program nominal if non-fs mode, otherwise full range
 	/* PB7 = FreeSync Minimum refresh rate (Hz) */
-	infopacket->sb[7] = (unsigned char)((vrr->min_refresh_in_uhz + 500000) / 1000000);
+	if (vrr->state == VRR_STATE_ACTIVE_VARIABLE ||
+			vrr->state == VRR_STATE_ACTIVE_FIXED) {
+		infopacket->sb[7] = (unsigned char)((vrr->min_refresh_in_uhz + 500000) / 1000000);
+	} else {
+		infopacket->sb[7] = (unsigned char)((vrr->max_refresh_in_uhz + 500000) / 1000000);
+	}
 
 	/* PB8 = FreeSync Maximum refresh rate (Hz)
 	 * Note: We should never go above the field rate of the mode timing set.
 	 */
 	infopacket->sb[8] = (unsigned char)((vrr->max_refresh_in_uhz + 500000) / 1000000);
 
+	//FreeSync HDR
+	infopacket->sb[9] = 0;
+	infopacket->sb[10] = 0;
+}
+
+static void build_vrr_infopacket_data_v3(const struct mod_vrr_params *vrr,
+		struct dc_info_packet *infopacket)
+{
+	/* PB1 = 0x1A (24bit AMD IEEE OUI (0x00001A) - Byte 0) */
+	infopacket->sb[1] = 0x1A;
+
+	/* PB2 = 0x00 (24bit AMD IEEE OUI (0x00001A) - Byte 1) */
+	infopacket->sb[2] = 0x00;
+
+	/* PB3 = 0x00 (24bit AMD IEEE OUI (0x00001A) - Byte 2) */
+	infopacket->sb[3] = 0x00;
+
+	/* PB4 = Reserved */
+
+	/* PB5 = Reserved */
+
+	/* PB6 = [Bits 7:3 = Reserved] */
+
+	/* PB6 = [Bit 0 = FreeSync Supported] */
+	if (vrr->state != VRR_STATE_UNSUPPORTED)
+		infopacket->sb[6] |= 0x01;
+
+	/* PB6 = [Bit 1 = FreeSync Enabled] */
+	if (vrr->state != VRR_STATE_DISABLED &&
+			vrr->state != VRR_STATE_UNSUPPORTED)
+		infopacket->sb[6] |= 0x02;
+
+	/* PB6 = [Bit 2 = FreeSync Active] */
+	if (vrr->state == VRR_STATE_ACTIVE_VARIABLE ||
+			vrr->state == VRR_STATE_ACTIVE_FIXED)
+		infopacket->sb[6] |= 0x04;
+
+	if (vrr->state == VRR_STATE_ACTIVE_FIXED) {
+		/* PB7 = FreeSync Minimum refresh rate (Hz) */
+		infopacket->sb[7] = (unsigned char)((vrr->fixed_refresh_in_uhz + 500000) / 1000000);
+		/* PB8 = FreeSync Maximum refresh rate (Hz) */
+		infopacket->sb[8] = (unsigned char)((vrr->fixed_refresh_in_uhz + 500000) / 1000000);
+	} else if (vrr->state == VRR_STATE_ACTIVE_VARIABLE) {
+		/* PB7 = FreeSync Minimum refresh rate (Hz) */
+		infopacket->sb[7] = (unsigned char)((vrr->min_refresh_in_uhz + 500000) / 1000000);
+		/* PB8 = FreeSync Maximum refresh rate (Hz) */
+		infopacket->sb[8] = (unsigned char)((vrr->max_refresh_in_uhz + 500000) / 1000000);
+	} else {
+		// Non-fs case, program nominal range
+		/* PB7 = FreeSync Minimum refresh rate (Hz) */
+		infopacket->sb[7] = (unsigned char)((vrr->max_refresh_in_uhz + 500000) / 1000000);
+		/* PB8 = FreeSync Maximum refresh rate (Hz) */
+		infopacket->sb[8] = (unsigned char)((vrr->max_refresh_in_uhz + 500000) / 1000000);
+	}
 
 	//FreeSync HDR
 	infopacket->sb[9] = 0;
@@ -678,7 +738,7 @@ static void build_vrr_infopacket_v1(enum signal_type signal,
 	unsigned int payload_size = 0;
 
 	build_vrr_infopacket_header_v1(signal, infopacket, &payload_size);
-	build_vrr_infopacket_data(vrr, infopacket);
+	build_vrr_infopacket_data_v1(vrr, infopacket);
 	build_vrr_infopacket_checksum(&payload_size, infopacket);
 
 	infopacket->valid = true;
@@ -692,7 +752,24 @@ static void build_vrr_infopacket_v2(enum signal_type signal,
 	unsigned int payload_size = 0;
 
 	build_vrr_infopacket_header_v2(signal, infopacket, &payload_size);
-	build_vrr_infopacket_data(vrr, infopacket);
+	build_vrr_infopacket_data_v1(vrr, infopacket);
+
+	build_vrr_infopacket_fs2_data(app_tf, infopacket);
+
+	build_vrr_infopacket_checksum(&payload_size, infopacket);
+
+	infopacket->valid = true;
+}
+
+static void build_vrr_infopacket_v3(enum signal_type signal,
+		const struct mod_vrr_params *vrr,
+		enum color_transfer_func app_tf,
+		struct dc_info_packet *infopacket)
+{
+	unsigned int payload_size = 0;
+
+	build_vrr_infopacket_header_v2(signal, infopacket, &payload_size);
+	build_vrr_infopacket_data_v3(vrr, infopacket);
 
 	build_vrr_infopacket_fs2_data(app_tf, infopacket);
 
@@ -717,11 +794,14 @@ void mod_freesync_build_vrr_infopacket(struct mod_freesync *mod_freesync,
 		return;
 
 	switch (packet_type) {
-	case PACKET_TYPE_FS2:
+	case PACKET_TYPE_FS_V3:
+		build_vrr_infopacket_v3(stream->signal, vrr, app_tf, infopacket);
+		break;
+	case PACKET_TYPE_FS_V2:
 		build_vrr_infopacket_v2(stream->signal, vrr, app_tf, infopacket);
 		break;
 	case PACKET_TYPE_VRR:
-	case PACKET_TYPE_FS1:
+	case PACKET_TYPE_FS_V1:
 	default:
 		build_vrr_infopacket_v1(stream->signal, vrr, infopacket);
 	}
@@ -793,6 +873,11 @@ void mod_freesync_build_vrr_params(struct mod_freesync *mod_freesync,
 				calc_duration_in_us_from_refresh_in_uhz(
 						(unsigned int)max_refresh_in_uhz);
 
+		if (in_config->state == VRR_STATE_ACTIVE_FIXED)
+			in_out_vrr->fixed_refresh_in_uhz = in_config->fixed_refresh_in_uhz;
+		else
+			in_out_vrr->fixed_refresh_in_uhz = 0;
+
 		refresh_range = in_out_vrr->max_refresh_in_uhz -
 				in_out_vrr->min_refresh_in_uhz;
 
@@ -843,7 +928,7 @@ void mod_freesync_build_vrr_params(struct mod_freesync *mod_freesync,
 				in_out_vrr->min_refresh_in_uhz);
 	} else if (in_out_vrr->state == VRR_STATE_ACTIVE_FIXED) {
 		in_out_vrr->fixed.target_refresh_in_uhz =
-				in_out_vrr->min_refresh_in_uhz;
+				in_out_vrr->fixed_refresh_in_uhz;
 		if (in_out_vrr->fixed.ramping_active &&
 				in_out_vrr->fixed.fixed_active) {
 			/* Do not update vtotals if ramping is already active
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c
index cc1d3f470b99..e9fbd94f8635 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c
@@ -328,7 +328,8 @@ enum mod_hdcp_status mod_hdcp_add_display(struct mod_hdcp *hdcp,
 	/* add display to connection */
 	hdcp->connection.link = *link;
 	*display_container = *display;
-	status = mod_hdcp_add_display_to_topology(hdcp, display->index);
+	status = mod_hdcp_add_display_to_topology(hdcp, display_container);
+
 	if (status != MOD_HDCP_STATUS_SUCCESS)
 		goto out;
 
@@ -374,7 +375,7 @@ enum mod_hdcp_status mod_hdcp_remove_display(struct mod_hdcp *hdcp,
 	status = mod_hdcp_remove_display_from_topology(hdcp, index);
 	if (status != MOD_HDCP_STATUS_SUCCESS)
 		goto out;
-	display->state = MOD_HDCP_DISPLAY_INACTIVE;
+	memset(display, 0, sizeof(struct mod_hdcp_display));
 
 	/* request authentication when connection is not reset */
 	if (current_state(hdcp) != HDCP_UNINITIALIZED)
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h
index 5cb4546be0ef..b0cefed2eb02 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h
@@ -328,7 +328,7 @@ void mod_hdcp_dump_binary_message(uint8_t *msg, uint32_t msg_size,
 
 /* psp functions */
 enum mod_hdcp_status mod_hdcp_add_display_to_topology(
-		struct mod_hdcp *hdcp, uint8_t index);
+		struct mod_hdcp *hdcp, struct mod_hdcp_display *display);
 enum mod_hdcp_status mod_hdcp_remove_display_from_topology(
 		struct mod_hdcp *hdcp, uint8_t index);
 enum mod_hdcp_status mod_hdcp_hdcp1_create_session(struct mod_hdcp *hdcp);
@@ -357,8 +357,6 @@ enum mod_hdcp_status mod_hdcp_hdcp2_prepare_stream_management(
 		struct mod_hdcp *hdcp);
 enum mod_hdcp_status mod_hdcp_hdcp2_validate_stream_ready(
 		struct mod_hdcp *hdcp);
-enum mod_hdcp_status mod_hdcp_hdcp2_get_link_encryption_status(struct mod_hdcp *hdcp,
-							       enum mod_hdcp_encryption_status *encryption_status);
 
 /* ddc functions */
 enum mod_hdcp_status mod_hdcp_read_bksv(struct mod_hdcp *hdcp);
@@ -503,11 +501,6 @@ static inline uint8_t is_display_active(struct mod_hdcp_display *display)
 	return display->state >= MOD_HDCP_DISPLAY_ACTIVE;
 }
 
-static inline uint8_t is_display_added(struct mod_hdcp_display *display)
-{
-	return display->state >= MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED;
-}
-
 static inline uint8_t is_display_encryption_enabled(struct mod_hdcp_display *display)
 {
 	return display->state >= MOD_HDCP_DISPLAY_ENCRYPTION_ENABLED;
@@ -515,34 +508,23 @@ static inline uint8_t is_display_encryption_enabled(struct mod_hdcp_display *dis
 
 static inline uint8_t get_active_display_count(struct mod_hdcp *hdcp)
 {
-	uint8_t added_count = 0;
+	uint8_t active_count = 0;
 	uint8_t i;
 
 	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
 		if (is_display_active(&hdcp->displays[i]))
-			added_count++;
-	return added_count;
-}
-
-static inline uint8_t get_added_display_count(struct mod_hdcp *hdcp)
-{
-	uint8_t added_count = 0;
-	uint8_t i;
-
-	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
-		if (is_display_added(&hdcp->displays[i]))
-			added_count++;
-	return added_count;
+			active_count++;
+	return active_count;
 }
 
-static inline struct mod_hdcp_display *get_first_added_display(
+static inline struct mod_hdcp_display *get_first_active_display(
 		struct mod_hdcp *hdcp)
 {
 	uint8_t i;
 	struct mod_hdcp_display *display = NULL;
 
 	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
-		if (is_display_added(&hdcp->displays[i])) {
+		if (is_display_active(&hdcp->displays[i])) {
 			display = &hdcp->displays[i];
 			break;
 		}
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
index 37c8c05497d6..f244b72e74e0 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
@@ -129,7 +129,7 @@ static inline uint8_t get_device_count(struct mod_hdcp *hdcp)
 static inline enum mod_hdcp_status check_device_count(struct mod_hdcp *hdcp)
 {
 	/* device count must be greater than or equal to tracked hdcp displays */
-	return (get_device_count(hdcp) < get_added_display_count(hdcp)) ?
+	return (get_device_count(hdcp) < get_active_display_count(hdcp)) ?
 			MOD_HDCP_STATUS_HDCP1_DEVICE_COUNT_MISMATCH_FAILURE :
 			MOD_HDCP_STATUS_SUCCESS;
 }
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c
index 491c00f48026..549c113abcf7 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c
@@ -208,7 +208,7 @@ static inline uint8_t get_device_count(struct mod_hdcp *hdcp)
 static enum mod_hdcp_status check_device_count(struct mod_hdcp *hdcp)
 {
 	/* device count must be greater than or equal to tracked hdcp displays */
-	return (get_device_count(hdcp) < get_added_display_count(hdcp)) ?
+	return (get_device_count(hdcp) < get_active_display_count(hdcp)) ?
 			MOD_HDCP_STATUS_HDCP2_DEVICE_COUNT_MISMATCH_FAILURE :
 			MOD_HDCP_STATUS_SUCCESS;
 }
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_log.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_log.c
index 44956f9ba178..fb6a19d020f9 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_log.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_log.c
@@ -98,8 +98,8 @@ char *mod_hdcp_status_to_str(int32_t status)
 		return "MOD_HDCP_STATUS_HDCP1_VALIDATE_KSV_LIST_FAILURE";
 	case MOD_HDCP_STATUS_HDCP1_KSV_LIST_REVOKED:
 		return "MOD_HDCP_STATUS_HDCP1_KSV_LIST_REVOKED";
-	case MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION:
-		return "MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION";
+	case MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION_FAILURE:
+		return "MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION_FAILURE";
 	case MOD_HDCP_STATUS_HDCP1_ENABLE_STREAM_ENCRYPTION_FAILURE:
 		return "MOD_HDCP_STATUS_HDCP1_ENABLE_STREAM_ENCRYPTION_FAILURE";
 	case MOD_HDCP_STATUS_HDCP1_MAX_CASCADE_EXCEEDED_FAILURE:
@@ -158,8 +158,8 @@ char *mod_hdcp_status_to_str(int32_t status)
 		return "MOD_HDCP_STATUS_HDCP2_RX_ID_LIST_REVOKED";
 	case MOD_HDCP_STATUS_HDCP2_RX_ID_LIST_NOT_READY:
 		return "MOD_HDCP_STATUS_HDCP2_RX_ID_LIST_NOT_READY";
-	case MOD_HDCP_STATUS_HDCP2_ENABLE_STREAM_ENCRYPTION:
-		return "MOD_HDCP_STATUS_HDCP2_ENABLE_STREAM_ENCRYPTION";
+	case MOD_HDCP_STATUS_HDCP2_ENABLE_STREAM_ENCRYPTION_FAILURE:
+		return "MOD_HDCP_STATUS_HDCP2_ENABLE_STREAM_ENCRYPTION_FAILURE";
 	case MOD_HDCP_STATUS_HDCP2_STREAM_READY_PENDING:
 		return "MOD_HDCP_STATUS_HDCP2_STREAM_READY_PENDING";
 	case MOD_HDCP_STATUS_HDCP2_VALIDATE_STREAM_READY_FAILURE:
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
index c2929815c3ee..fb1161dd7ea8 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
@@ -51,12 +51,15 @@ enum mod_hdcp_status mod_hdcp_remove_display_from_topology(
  	struct ta_dtm_shared_memory *dtm_cmd;
 	struct mod_hdcp_display *display =
 			get_active_display_at_index(hdcp, index);
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
 	dtm_cmd = (struct ta_dtm_shared_memory *)psp->dtm_context.dtm_shared_buf;
 
-	if (!display || !is_display_added(display))
+	if (!display || !is_display_active(display))
 		return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND;
 
+	mutex_lock(&psp->dtm_context.mutex);
+
 	memset(dtm_cmd, 0, sizeof(struct ta_dtm_shared_memory));
 
 	dtm_cmd->cmd_id = TA_DTM_COMMAND__TOPOLOGY_UPDATE_V2;
@@ -66,34 +69,33 @@ enum mod_hdcp_status mod_hdcp_remove_display_from_topology(
 
 	psp_dtm_invoke(psp, dtm_cmd->cmd_id);
 
-	if (dtm_cmd->dtm_status != TA_DTM_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_UPDATE_TOPOLOGY_FAILURE;
+	if (dtm_cmd->dtm_status != TA_DTM_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_UPDATE_TOPOLOGY_FAILURE;
+	} else {
+		display->state = MOD_HDCP_DISPLAY_ACTIVE;
+		HDCP_TOP_REMOVE_DISPLAY_TRACE(hdcp, display->index);
+	}
 
-	display->state = MOD_HDCP_DISPLAY_ACTIVE;
-	HDCP_TOP_REMOVE_DISPLAY_TRACE(hdcp, display->index);
- 
- 	return MOD_HDCP_STATUS_SUCCESS;
- 
+	mutex_unlock(&psp->dtm_context.mutex);
+	return status;
 }
 enum mod_hdcp_status mod_hdcp_add_display_to_topology(struct mod_hdcp *hdcp,
-						      uint8_t index)
+					       struct mod_hdcp_display *display)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_dtm_shared_memory *dtm_cmd;
-	struct mod_hdcp_display *display =
-			get_active_display_at_index(hdcp, index);
 	struct mod_hdcp_link *link = &hdcp->connection.link;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
 	if (!psp->dtm_context.dtm_initialized) {
 		DRM_ERROR("Failed to add display topology, DTM TA is not initialized.");
+		display->state = MOD_HDCP_DISPLAY_INACTIVE;
 		return MOD_HDCP_STATUS_FAILURE;
 	}
 
-	if (!display || is_display_added(display))
-		return MOD_HDCP_STATUS_UPDATE_TOPOLOGY_FAILURE;
-
 	dtm_cmd = (struct ta_dtm_shared_memory *)psp->dtm_context.dtm_shared_buf;
 
+	mutex_lock(&psp->dtm_context.mutex);
 	memset(dtm_cmd, 0, sizeof(struct ta_dtm_shared_memory));
 
 	dtm_cmd->cmd_id = TA_DTM_COMMAND__TOPOLOGY_UPDATE_V2;
@@ -113,21 +115,24 @@ enum mod_hdcp_status mod_hdcp_add_display_to_topology(struct mod_hdcp *hdcp,
 
 	psp_dtm_invoke(psp, dtm_cmd->cmd_id);
 
-	if (dtm_cmd->dtm_status != TA_DTM_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_UPDATE_TOPOLOGY_FAILURE;
-
-	display->state = MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED;
-	HDCP_TOP_ADD_DISPLAY_TRACE(hdcp, display->index);
+	if (dtm_cmd->dtm_status != TA_DTM_STATUS__SUCCESS) {
+		display->state = MOD_HDCP_DISPLAY_INACTIVE;
+		status = MOD_HDCP_STATUS_UPDATE_TOPOLOGY_FAILURE;
+	} else {
+		HDCP_TOP_ADD_DISPLAY_TRACE(hdcp, display->index);
+	}
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->dtm_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp1_create_session(struct mod_hdcp *hdcp)
 {
 
 	struct psp_context *psp = hdcp->config.psp.handle;
-	struct mod_hdcp_display *display = get_first_added_display(hdcp);
+	struct mod_hdcp_display *display = get_first_active_display(hdcp);
 	struct ta_hdcp_shared_memory *hdcp_cmd;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
 	if (!psp->hdcp_context.hdcp_initialized) {
 		DRM_ERROR("Failed to create hdcp session. HDCP TA is not initialized.");
@@ -135,6 +140,8 @@ enum mod_hdcp_status mod_hdcp_hdcp1_create_session(struct mod_hdcp *hdcp)
 	}
 
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
+
+	mutex_lock(&psp->hdcp_context.mutex);
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
 	hdcp_cmd->in_msg.hdcp1_create_session.display_handle = display->index;
@@ -144,16 +151,18 @@ enum mod_hdcp_status mod_hdcp_hdcp1_create_session(struct mod_hdcp *hdcp)
 
 	hdcp->auth.id = hdcp_cmd->out_msg.hdcp1_create_session.session_handle;
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP1_CREATE_SESSION_FAILURE;
-
-	hdcp->auth.msg.hdcp1.ainfo = hdcp_cmd->out_msg.hdcp1_create_session.ainfo_primary;
-	memcpy(hdcp->auth.msg.hdcp1.aksv, hdcp_cmd->out_msg.hdcp1_create_session.aksv_primary,
-		sizeof(hdcp->auth.msg.hdcp1.aksv));
-	memcpy(hdcp->auth.msg.hdcp1.an, hdcp_cmd->out_msg.hdcp1_create_session.an_primary,
-		sizeof(hdcp->auth.msg.hdcp1.an));
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP1_CREATE_SESSION_FAILURE;
+	} else {
+		hdcp->auth.msg.hdcp1.ainfo = hdcp_cmd->out_msg.hdcp1_create_session.ainfo_primary;
+		memcpy(hdcp->auth.msg.hdcp1.aksv, hdcp_cmd->out_msg.hdcp1_create_session.aksv_primary,
+		       sizeof(hdcp->auth.msg.hdcp1.aksv));
+		memcpy(hdcp->auth.msg.hdcp1.an, hdcp_cmd->out_msg.hdcp1_create_session.an_primary,
+		       sizeof(hdcp->auth.msg.hdcp1.an));
+	}
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp1_destroy_session(struct mod_hdcp *hdcp)
@@ -162,7 +171,9 @@ enum mod_hdcp_status mod_hdcp_hdcp1_destroy_session(struct mod_hdcp *hdcp)
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	uint8_t i = 0;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -171,27 +182,30 @@ enum mod_hdcp_status mod_hdcp_hdcp1_destroy_session(struct mod_hdcp *hdcp)
 
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP1_DESTROY_SESSION_FAILURE;
-
-	HDCP_TOP_HDCP1_DESTROY_SESSION_TRACE(hdcp);
-	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
-		if (is_display_encryption_enabled(
-				&hdcp->displays[i])) {
-			hdcp->displays[i].state =
-					MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED;
-			HDCP_HDCP1_DISABLED_TRACE(hdcp,
-					hdcp->displays[i].index);
-		}
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP1_DESTROY_SESSION_FAILURE;
+	} else {
+		HDCP_TOP_HDCP1_DESTROY_SESSION_TRACE(hdcp);
+		for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
+			if (is_display_encryption_enabled(&hdcp->displays[i])) {
+				hdcp->displays[i].state =
+							MOD_HDCP_DISPLAY_ACTIVE;
+				HDCP_HDCP1_DISABLED_TRACE(
+					hdcp, hdcp->displays[i].index);
+			}
+	}
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp1_validate_rx(struct mod_hdcp *hdcp)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -206,10 +220,9 @@ enum mod_hdcp_status mod_hdcp_hdcp1_validate_rx(struct mod_hdcp *hdcp)
 
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP1_VALIDATE_RX_FAILURE;
-
-	if (hdcp_cmd->out_msg.hdcp1_first_part_authentication.authentication_status ==
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP1_VALIDATE_RX_FAILURE;
+	} else if (hdcp_cmd->out_msg.hdcp1_first_part_authentication.authentication_status ==
 	    TA_HDCP_AUTHENTICATION_STATUS__HDCP1_FIRST_PART_COMPLETE) {
 		/* needs second part of authentication */
 		hdcp->connection.is_repeater = 1;
@@ -219,20 +232,22 @@ enum mod_hdcp_status mod_hdcp_hdcp1_validate_rx(struct mod_hdcp *hdcp)
 	} else if (hdcp_cmd->out_msg.hdcp1_first_part_authentication.authentication_status ==
 		   TA_HDCP_AUTHENTICATION_STATUS__HDCP1_KSV_REVOKED) {
 		hdcp->connection.is_hdcp1_revoked = 1;
-		return MOD_HDCP_STATUS_HDCP1_BKSV_REVOKED;
+		status = MOD_HDCP_STATUS_HDCP1_BKSV_REVOKED;
 	} else
-		return MOD_HDCP_STATUS_HDCP1_VALIDATE_RX_FAILURE;
-
+		status = MOD_HDCP_STATUS_HDCP1_VALIDATE_RX_FAILURE;
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp1_enable_encryption(struct mod_hdcp *hdcp)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
-	struct mod_hdcp_display *display = get_first_added_display(hdcp);
+	struct mod_hdcp_display *display = get_first_active_display(hdcp);
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -241,14 +256,15 @@ enum mod_hdcp_status mod_hdcp_hdcp1_enable_encryption(struct mod_hdcp *hdcp)
 
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION;
-
-	if (!is_dp_mst_hdcp(hdcp)) {
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION_FAILURE;
+	} else if (!is_dp_mst_hdcp(hdcp)) {
 		display->state = MOD_HDCP_DISPLAY_ENCRYPTION_ENABLED;
 		HDCP_HDCP1_ENABLED_TRACE(hdcp, display->index);
 	}
-	return MOD_HDCP_STATUS_SUCCESS;
+
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp1_validate_ksvlist_vp(struct mod_hdcp *hdcp)
@@ -257,6 +273,7 @@ enum mod_hdcp_status mod_hdcp_hdcp1_validate_ksvlist_vp(struct mod_hdcp *hdcp)
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -287,6 +304,7 @@ enum mod_hdcp_status mod_hdcp_hdcp1_validate_ksvlist_vp(struct mod_hdcp *hdcp)
 		status = MOD_HDCP_STATUS_HDCP1_VALIDATE_KSV_LIST_FAILURE;
 	}
 
+	mutex_unlock(&psp->hdcp_context.mutex);
 	return status;
 }
 
@@ -296,14 +314,15 @@ enum mod_hdcp_status mod_hdcp_hdcp1_enable_dp_stream_encryption(struct mod_hdcp
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	int i = 0;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 
 	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++) {
 
-		if (hdcp->displays[i].state != MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED ||
-		    hdcp->displays[i].adjust.disable)
-			continue;
+		if (hdcp->displays[i].adjust.disable || hdcp->displays[i].state != MOD_HDCP_DISPLAY_ACTIVE)
+				continue;
 
 		memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -313,21 +332,26 @@ enum mod_hdcp_status mod_hdcp_hdcp1_enable_dp_stream_encryption(struct mod_hdcp
 
 		psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-		if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-			return MOD_HDCP_STATUS_HDCP1_ENABLE_STREAM_ENCRYPTION_FAILURE;
+		if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+			status = MOD_HDCP_STATUS_HDCP1_ENABLE_STREAM_ENCRYPTION_FAILURE;
+			break;
+		}
 
 		hdcp->displays[i].state = MOD_HDCP_DISPLAY_ENCRYPTION_ENABLED;
 		HDCP_HDCP1_ENABLED_TRACE(hdcp, hdcp->displays[i].index);
 	}
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp1_link_maintenance(struct mod_hdcp *hdcp)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
@@ -339,12 +363,12 @@ enum mod_hdcp_status mod_hdcp_hdcp1_link_maintenance(struct mod_hdcp *hdcp)
 
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP1_LINK_MAINTENANCE_FAILURE;
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS ||
+			hdcp_cmd->out_msg.hdcp1_get_encryption_status.protection_level != 1)
+		status = MOD_HDCP_STATUS_HDCP1_LINK_MAINTENANCE_FAILURE;
 
-	return (hdcp_cmd->out_msg.hdcp1_get_encryption_status.protection_level == 1)
-		       ? MOD_HDCP_STATUS_SUCCESS
-		       : MOD_HDCP_STATUS_HDCP1_LINK_MAINTENANCE_FAILURE;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp1_get_link_encryption_status(struct mod_hdcp *hdcp,
@@ -364,19 +388,23 @@ enum mod_hdcp_status mod_hdcp_hdcp2_create_session(struct mod_hdcp *hdcp)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
-	struct mod_hdcp_display *display = get_first_added_display(hdcp);
+	struct mod_hdcp_display *display = get_first_active_display(hdcp);
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
+
 
 	if (!psp->hdcp_context.hdcp_initialized) {
 		DRM_ERROR("Failed to create hdcp session, HDCP TA is not initialized");
 		return MOD_HDCP_STATUS_FAILURE;
 	}
 
-	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
-	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
-
 	if (!display)
 		return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND;
 
+	mutex_lock(&psp->hdcp_context.mutex);
+
+	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
+	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
+
 	hdcp_cmd->in_msg.hdcp2_create_session_v2.display_handle = display->index;
 
 	if (hdcp->connection.link.adjust.hdcp2.force_type == MOD_HDCP_FORCE_TYPE_0)
@@ -393,12 +421,14 @@ enum mod_hdcp_status mod_hdcp_hdcp2_create_session(struct mod_hdcp *hdcp)
 
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_CREATE_SESSION_FAILURE;
 
-	hdcp->auth.id = hdcp_cmd->out_msg.hdcp2_create_session_v2.session_handle;
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
+		status = MOD_HDCP_STATUS_HDCP2_CREATE_SESSION_FAILURE;
+	else
+		hdcp->auth.id = hdcp_cmd->out_msg.hdcp2_create_session_v2.session_handle;
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_destroy_session(struct mod_hdcp *hdcp)
@@ -406,7 +436,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_destroy_session(struct mod_hdcp *hdcp)
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	uint8_t i = 0;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -415,20 +447,21 @@ enum mod_hdcp_status mod_hdcp_hdcp2_destroy_session(struct mod_hdcp *hdcp)
 
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_DESTROY_SESSION_FAILURE;
-
-	HDCP_TOP_HDCP2_DESTROY_SESSION_TRACE(hdcp);
-	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
-		if (is_display_encryption_enabled(
-				&hdcp->displays[i])) {
-			hdcp->displays[i].state =
-					MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED;
-			HDCP_HDCP2_DISABLED_TRACE(hdcp,
-					hdcp->displays[i].index);
-		}
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP2_DESTROY_SESSION_FAILURE;
+	} else {
+		HDCP_TOP_HDCP2_DESTROY_SESSION_TRACE(hdcp);
+		for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++)
+			if (is_display_encryption_enabled(&hdcp->displays[i])) {
+				hdcp->displays[i].state =
+							MOD_HDCP_DISPLAY_ACTIVE;
+				HDCP_HDCP2_DISABLED_TRACE(
+					hdcp, hdcp->displays[i].index);
+			}
+	}
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_prepare_ake_init(struct mod_hdcp *hdcp)
@@ -437,7 +470,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_prepare_ake_init(struct mod_hdcp *hdcp)
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_output_v2 *msg_out;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -452,12 +487,13 @@ enum mod_hdcp_status mod_hdcp_hdcp2_prepare_ake_init(struct mod_hdcp *hdcp)
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
 	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_PREP_AKE_INIT_FAILURE;
-
-	memcpy(&hdcp->auth.msg.hdcp2.ake_init[0], &msg_out->prepare.transmitter_message[0],
-	       sizeof(hdcp->auth.msg.hdcp2.ake_init));
+		status = MOD_HDCP_STATUS_HDCP2_PREP_AKE_INIT_FAILURE;
+	else
+		memcpy(&hdcp->auth.msg.hdcp2.ake_init[0], &msg_out->prepare.transmitter_message[0],
+		       sizeof(hdcp->auth.msg.hdcp2.ake_init));
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_validate_ake_cert(struct mod_hdcp *hdcp)
@@ -466,7 +502,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_ake_cert(struct mod_hdcp *hdcp)
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_output_v2 *msg_out;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -488,26 +526,32 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_ake_cert(struct mod_hdcp *hdcp)
 
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_VALIDATE_AKE_CERT_FAILURE;
-
-	memcpy(hdcp->auth.msg.hdcp2.ake_no_stored_km, &msg_out->prepare.transmitter_message[0],
-	       sizeof(hdcp->auth.msg.hdcp2.ake_no_stored_km));
-
-	memcpy(hdcp->auth.msg.hdcp2.ake_stored_km,
-	       &msg_out->prepare.transmitter_message[sizeof(hdcp->auth.msg.hdcp2.ake_no_stored_km)],
-	       sizeof(hdcp->auth.msg.hdcp2.ake_stored_km));
-
-	if (msg_out->process.msg1_status == TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS) {
-		hdcp->connection.is_km_stored = msg_out->process.is_km_stored ? 1 : 0;
-		hdcp->connection.is_repeater = msg_out->process.is_repeater ? 1 : 0;
-		return MOD_HDCP_STATUS_SUCCESS;
-	} else if (msg_out->process.msg1_status == TA_HDCP2_MSG_AUTHENTICATION_STATUS__RECEIVERID_REVOKED) {
-		hdcp->connection.is_hdcp2_revoked = 1;
-		return MOD_HDCP_STATUS_HDCP2_AKE_CERT_REVOKED;
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP2_VALIDATE_AKE_CERT_FAILURE;
+	} else {
+		memcpy(hdcp->auth.msg.hdcp2.ake_no_stored_km,
+		       &msg_out->prepare.transmitter_message[0],
+		       sizeof(hdcp->auth.msg.hdcp2.ake_no_stored_km));
+
+		memcpy(hdcp->auth.msg.hdcp2.ake_stored_km,
+		       &msg_out->prepare.transmitter_message[sizeof(hdcp->auth.msg.hdcp2.ake_no_stored_km)],
+		       sizeof(hdcp->auth.msg.hdcp2.ake_stored_km));
+
+		if (msg_out->process.msg1_status ==
+		    TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS) {
+			hdcp->connection.is_km_stored =
+				msg_out->process.is_km_stored ? 1 : 0;
+			hdcp->connection.is_repeater =
+				msg_out->process.is_repeater ? 1 : 0;
+			status = MOD_HDCP_STATUS_SUCCESS;
+		} else if (msg_out->process.msg1_status ==
+			   TA_HDCP2_MSG_AUTHENTICATION_STATUS__RECEIVERID_REVOKED) {
+			hdcp->connection.is_hdcp2_revoked = 1;
+			status = MOD_HDCP_STATUS_HDCP2_AKE_CERT_REVOKED;
+		}
 	}
-
-	return MOD_HDCP_STATUS_HDCP2_VALIDATE_AKE_CERT_FAILURE;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_validate_h_prime(struct mod_hdcp *hdcp)
@@ -516,7 +560,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_h_prime(struct mod_hdcp *hdcp)
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_output_v2 *msg_out;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -543,16 +589,15 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_h_prime(struct mod_hdcp *hdcp)
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
 	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_VALIDATE_H_PRIME_FAILURE;
-
-	if (msg_out->process.msg1_status != TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_VALIDATE_H_PRIME_FAILURE;
+		status = MOD_HDCP_STATUS_HDCP2_VALIDATE_H_PRIME_FAILURE;
+	else if (msg_out->process.msg1_status != TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS)
+		status = MOD_HDCP_STATUS_HDCP2_VALIDATE_H_PRIME_FAILURE;
 	else if (!hdcp->connection.is_km_stored &&
-		 msg_out->process.msg2_status != TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_VALIDATE_PAIRING_INFO_FAILURE;
-
+		   msg_out->process.msg2_status != TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS)
+		status = MOD_HDCP_STATUS_HDCP2_VALIDATE_PAIRING_INFO_FAILURE;
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_prepare_lc_init(struct mod_hdcp *hdcp)
@@ -561,7 +606,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_prepare_lc_init(struct mod_hdcp *hdcp)
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_output_v2 *msg_out;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -577,12 +624,13 @@ enum mod_hdcp_status mod_hdcp_hdcp2_prepare_lc_init(struct mod_hdcp *hdcp)
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
 	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_PREP_LC_INIT_FAILURE;
-
-	memcpy(hdcp->auth.msg.hdcp2.lc_init, &msg_out->prepare.transmitter_message[0],
-	       sizeof(hdcp->auth.msg.hdcp2.lc_init));
+		status = MOD_HDCP_STATUS_HDCP2_PREP_LC_INIT_FAILURE;
+	else
+		memcpy(hdcp->auth.msg.hdcp2.lc_init, &msg_out->prepare.transmitter_message[0],
+		       sizeof(hdcp->auth.msg.hdcp2.lc_init));
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_validate_l_prime(struct mod_hdcp *hdcp)
@@ -591,7 +639,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_l_prime(struct mod_hdcp *hdcp)
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_output_v2 *msg_out;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -610,13 +660,12 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_l_prime(struct mod_hdcp *hdcp)
 
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_VALIDATE_L_PRIME_FAILURE;
-
-	if (msg_out->process.msg1_status != TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_VALIDATE_L_PRIME_FAILURE;
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS ||
+			msg_out->process.msg1_status != TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS)
+		status = MOD_HDCP_STATUS_HDCP2_VALIDATE_L_PRIME_FAILURE;
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_prepare_eks(struct mod_hdcp *hdcp)
@@ -625,7 +674,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_prepare_eks(struct mod_hdcp *hdcp)
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_output_v2 *msg_out;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -642,48 +693,55 @@ enum mod_hdcp_status mod_hdcp_hdcp2_prepare_eks(struct mod_hdcp *hdcp)
 	hdcp_cmd->cmd_id = TA_HDCP_COMMAND__HDCP2_PREPARE_PROCESS_AUTHENTICATION_MSG_V2;
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_PREP_EKS_FAILURE;
-
-	memcpy(hdcp->auth.msg.hdcp2.ske_eks, &msg_out->prepare.transmitter_message[0],
-	       sizeof(hdcp->auth.msg.hdcp2.ske_eks));
-	msg_out->prepare.msg1_desc.msg_size = sizeof(hdcp->auth.msg.hdcp2.ske_eks);
-
-	if (is_dp_hdcp(hdcp)) {
-		memcpy(hdcp->auth.msg.hdcp2.content_stream_type_dp,
-		       &msg_out->prepare.transmitter_message[sizeof(hdcp->auth.msg.hdcp2.ske_eks)],
-		       sizeof(hdcp->auth.msg.hdcp2.content_stream_type_dp));
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP2_PREP_EKS_FAILURE;
+	} else {
+		memcpy(hdcp->auth.msg.hdcp2.ske_eks,
+		       &msg_out->prepare.transmitter_message[0],
+		       sizeof(hdcp->auth.msg.hdcp2.ske_eks));
+		msg_out->prepare.msg1_desc.msg_size =
+			sizeof(hdcp->auth.msg.hdcp2.ske_eks);
+
+		if (is_dp_hdcp(hdcp)) {
+			memcpy(hdcp->auth.msg.hdcp2.content_stream_type_dp,
+			       &msg_out->prepare.transmitter_message[sizeof(hdcp->auth.msg.hdcp2.ske_eks)],
+			       sizeof(hdcp->auth.msg.hdcp2.content_stream_type_dp));
+		}
 	}
+	mutex_unlock(&psp->hdcp_context.mutex);
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_enable_encryption(struct mod_hdcp *hdcp)
 {
 	struct psp_context *psp = hdcp->config.psp.handle;
 	struct ta_hdcp_shared_memory *hdcp_cmd;
-	struct mod_hdcp_display *display = get_first_added_display(hdcp);
-
-	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
-	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
+	struct mod_hdcp_display *display = get_first_active_display(hdcp);
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
 	if (!display)
 		return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND;
 
+	mutex_lock(&psp->hdcp_context.mutex);
+
+	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
+	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
+
 	hdcp_cmd->in_msg.hdcp2_set_encryption.session_handle = hdcp->auth.id;
 
 	hdcp_cmd->cmd_id = TA_HDCP_COMMAND__HDCP2_SET_ENCRYPTION;
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_ENABLE_ENCRYPTION_FAILURE;
-
-	if (!is_dp_mst_hdcp(hdcp)) {
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP2_ENABLE_ENCRYPTION_FAILURE;
+	} else if (!is_dp_mst_hdcp(hdcp)) {
 		display->state = MOD_HDCP_DISPLAY_ENCRYPTION_ENABLED;
 		HDCP_HDCP2_ENABLED_TRACE(hdcp, display->index);
 	}
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_validate_rx_id_list(struct mod_hdcp *hdcp)
@@ -692,6 +750,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_rx_id_list(struct mod_hdcp *hdcp)
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_output_v2 *msg_out;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
+
+	mutex_lock(&psp->hdcp_context.mutex);
 
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
@@ -712,23 +773,26 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_rx_id_list(struct mod_hdcp *hdcp)
 
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_VALIDATE_RX_ID_LIST_FAILURE;
-
-	memcpy(hdcp->auth.msg.hdcp2.repeater_auth_ack, &msg_out->prepare.transmitter_message[0],
-	       sizeof(hdcp->auth.msg.hdcp2.repeater_auth_ack));
-
-	if (msg_out->process.msg1_status == TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS) {
-		hdcp->connection.is_km_stored = msg_out->process.is_km_stored ? 1 : 0;
-		hdcp->connection.is_repeater = msg_out->process.is_repeater ? 1 : 0;
-		return MOD_HDCP_STATUS_SUCCESS;
-	} else if (msg_out->process.msg1_status == TA_HDCP2_MSG_AUTHENTICATION_STATUS__RECEIVERID_REVOKED) {
-		hdcp->connection.is_hdcp2_revoked = 1;
-		return MOD_HDCP_STATUS_HDCP2_RX_ID_LIST_REVOKED;
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP2_VALIDATE_RX_ID_LIST_FAILURE;
+	} else {
+		memcpy(hdcp->auth.msg.hdcp2.repeater_auth_ack,
+		       &msg_out->prepare.transmitter_message[0],
+		       sizeof(hdcp->auth.msg.hdcp2.repeater_auth_ack));
+
+		if (msg_out->process.msg1_status ==
+		    TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS) {
+			hdcp->connection.is_km_stored = msg_out->process.is_km_stored ? 1 : 0;
+			hdcp->connection.is_repeater = msg_out->process.is_repeater ? 1 : 0;
+			status = MOD_HDCP_STATUS_SUCCESS;
+		} else if (msg_out->process.msg1_status ==
+			   TA_HDCP2_MSG_AUTHENTICATION_STATUS__RECEIVERID_REVOKED) {
+			hdcp->connection.is_hdcp2_revoked = 1;
+			status = MOD_HDCP_STATUS_HDCP2_RX_ID_LIST_REVOKED;
+		}
 	}
-
-
-	return MOD_HDCP_STATUS_HDCP2_VALIDATE_RX_ID_LIST_FAILURE;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_enable_dp_stream_encryption(struct mod_hdcp *hdcp)
@@ -737,7 +801,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_enable_dp_stream_encryption(struct mod_hdcp
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	uint8_t i;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -747,9 +813,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_enable_dp_stream_encryption(struct mod_hdcp
 
 
 	for (i = 0; i < MAX_NUM_OF_DISPLAYS; i++) {
-		if (hdcp->displays[i].state != MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED ||
-		    hdcp->displays[i].adjust.disable)
-			continue;
+		if (hdcp->displays[i].adjust.disable || hdcp->displays[i].state != MOD_HDCP_DISPLAY_ACTIVE)
+				continue;
+
 		hdcp_cmd->in_msg.hdcp2_enable_dp_stream_encryption.display_handle = hdcp->displays[i].index;
 		hdcp_cmd->in_msg.hdcp2_enable_dp_stream_encryption.session_handle = hdcp->auth.id;
 
@@ -763,8 +829,13 @@ enum mod_hdcp_status mod_hdcp_hdcp2_enable_dp_stream_encryption(struct mod_hdcp
 		HDCP_HDCP2_ENABLED_TRACE(hdcp, hdcp->displays[i].index);
 	}
 
-	return (hdcp_cmd->hdcp_status == TA_HDCP_STATUS__SUCCESS) ? MOD_HDCP_STATUS_SUCCESS
-								  : MOD_HDCP_STATUS_HDCP2_ENABLE_STREAM_ENCRYPTION;
+	if (hdcp_cmd->hdcp_status == TA_HDCP_STATUS__SUCCESS)
+		status = MOD_HDCP_STATUS_SUCCESS;
+	else
+		status = MOD_HDCP_STATUS_HDCP2_ENABLE_STREAM_ENCRYPTION_FAILURE;
+
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_prepare_stream_management(struct mod_hdcp *hdcp)
@@ -774,7 +845,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_prepare_stream_management(struct mod_hdcp *h
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_output_v2 *msg_out;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -789,15 +862,17 @@ enum mod_hdcp_status mod_hdcp_hdcp2_prepare_stream_management(struct mod_hdcp *h
 	hdcp_cmd->cmd_id = TA_HDCP_COMMAND__HDCP2_PREPARE_PROCESS_AUTHENTICATION_MSG_V2;
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_HDCP2_PREPARE_STREAM_MANAGEMENT_FAILURE;
-
-	hdcp->auth.msg.hdcp2.stream_manage_size = msg_out->prepare.msg1_desc.msg_size;
-
-	memcpy(hdcp->auth.msg.hdcp2.repeater_auth_stream_manage, &msg_out->prepare.transmitter_message[0],
-	       sizeof(hdcp->auth.msg.hdcp2.repeater_auth_stream_manage));
+	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS) {
+		status = MOD_HDCP_STATUS_HDCP2_PREPARE_STREAM_MANAGEMENT_FAILURE;
+	} else {
+		hdcp->auth.msg.hdcp2.stream_manage_size = msg_out->prepare.msg1_desc.msg_size;
 
-	return MOD_HDCP_STATUS_SUCCESS;
+		memcpy(hdcp->auth.msg.hdcp2.repeater_auth_stream_manage,
+		       &msg_out->prepare.transmitter_message[0],
+		       sizeof(hdcp->auth.msg.hdcp2.repeater_auth_stream_manage));
+	}
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
 
 enum mod_hdcp_status mod_hdcp_hdcp2_validate_stream_ready(struct mod_hdcp *hdcp)
@@ -806,7 +881,9 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_stream_ready(struct mod_hdcp *hdcp)
 	struct ta_hdcp_shared_memory *hdcp_cmd;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_input_v2 *msg_in;
 	struct ta_hdcp_cmd_hdcp2_process_prepare_authentication_message_output_v2 *msg_out;
+	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
+	mutex_lock(&psp->hdcp_context.mutex);
 	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
 	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
 
@@ -825,38 +902,13 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_stream_ready(struct mod_hdcp *hdcp)
 	hdcp_cmd->cmd_id = TA_HDCP_COMMAND__HDCP2_PREPARE_PROCESS_AUTHENTICATION_MSG_V2;
 	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
 
-	return (hdcp_cmd->hdcp_status == TA_HDCP_STATUS__SUCCESS) &&
-			       (msg_out->process.msg1_status == TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS)
-		       ? MOD_HDCP_STATUS_SUCCESS
-		       : MOD_HDCP_STATUS_HDCP2_VALIDATE_STREAM_READY_FAILURE;
-}
-
-enum mod_hdcp_status mod_hdcp_hdcp2_get_link_encryption_status(struct mod_hdcp *hdcp,
-							       enum mod_hdcp_encryption_status *encryption_status)
-{
-	struct psp_context *psp = hdcp->config.psp.handle;
-	struct ta_hdcp_shared_memory *hdcp_cmd;
-
-	hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.hdcp_shared_buf;
-
-	memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory));
-
-	hdcp_cmd->in_msg.hdcp2_get_encryption_status.session_handle = hdcp->auth.id;
-	hdcp_cmd->out_msg.hdcp2_get_encryption_status.protection_level = 0;
-	hdcp_cmd->cmd_id = TA_HDCP_COMMAND__HDCP2_GET_ENCRYPTION_STATUS;
-	*encryption_status = MOD_HDCP_ENCRYPTION_STATUS_HDCP_OFF;
-
-	psp_hdcp_invoke(psp, hdcp_cmd->cmd_id);
-
-	if (hdcp_cmd->hdcp_status != TA_HDCP_STATUS__SUCCESS)
-		return MOD_HDCP_STATUS_FAILURE;
-
-	if (hdcp_cmd->out_msg.hdcp2_get_encryption_status.protection_level == 1) {
-		if (hdcp_cmd->out_msg.hdcp2_get_encryption_status.hdcp2_type == TA_HDCP2_CONTENT_TYPE__TYPE1)
-			*encryption_status = MOD_HDCP_ENCRYPTION_STATUS_HDCP2_TYPE1_ON;
-		else
-			*encryption_status = MOD_HDCP_ENCRYPTION_STATUS_HDCP2_TYPE0_ON;
-	}
+	if (hdcp_cmd->hdcp_status == TA_HDCP_STATUS__SUCCESS &&
+	    msg_out->process.msg1_status == TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS)
+		status = MOD_HDCP_STATUS_SUCCESS;
+	else
+		status = MOD_HDCP_STATUS_HDCP2_VALIDATE_STREAM_READY_FAILURE;
 
-	return MOD_HDCP_STATUS_SUCCESS;
+	mutex_unlock(&psp->hdcp_context.mutex);
+	return status;
 }
+
diff --git a/drivers/gpu/drm/amd/display/modules/inc/mod_freesync.h b/drivers/gpu/drm/amd/display/modules/inc/mod_freesync.h
index dbe7835aabcf..0ba3cf7f336a 100644
--- a/drivers/gpu/drm/amd/display/modules/inc/mod_freesync.h
+++ b/drivers/gpu/drm/amd/display/modules/inc/mod_freesync.h
@@ -83,6 +83,8 @@ struct mod_freesync_config {
 	bool btr;
 	unsigned int min_refresh_in_uhz;
 	unsigned int max_refresh_in_uhz;
+	unsigned int fixed_refresh_in_uhz;
+
 };
 
 struct mod_vrr_params_btr {
@@ -112,6 +114,7 @@ struct mod_vrr_params {
 	uint32_t max_duration_in_us;
 	uint32_t max_refresh_in_uhz;
 	uint32_t min_duration_in_us;
+	uint32_t fixed_refresh_in_uhz;
 
 	struct dc_crtc_timing_adjust adjust;
 
diff --git a/drivers/gpu/drm/amd/display/modules/inc/mod_hdcp.h b/drivers/gpu/drm/amd/display/modules/inc/mod_hdcp.h
index c088602bc1a0..eed560eecbab 100644
--- a/drivers/gpu/drm/amd/display/modules/inc/mod_hdcp.h
+++ b/drivers/gpu/drm/amd/display/modules/inc/mod_hdcp.h
@@ -60,7 +60,7 @@ enum mod_hdcp_status {
 	MOD_HDCP_STATUS_HDCP1_KSV_LIST_NOT_READY,
 	MOD_HDCP_STATUS_HDCP1_VALIDATE_KSV_LIST_FAILURE,
 	MOD_HDCP_STATUS_HDCP1_KSV_LIST_REVOKED,
-	MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION,
+	MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION_FAILURE,
 	MOD_HDCP_STATUS_HDCP1_ENABLE_STREAM_ENCRYPTION_FAILURE,
 	MOD_HDCP_STATUS_HDCP1_MAX_CASCADE_EXCEEDED_FAILURE,
 	MOD_HDCP_STATUS_HDCP1_MAX_DEVS_EXCEEDED_FAILURE,
@@ -90,7 +90,7 @@ enum mod_hdcp_status {
 	MOD_HDCP_STATUS_HDCP2_RX_ID_LIST_NOT_READY,
 	MOD_HDCP_STATUS_HDCP2_VALIDATE_RX_ID_LIST_FAILURE,
 	MOD_HDCP_STATUS_HDCP2_RX_ID_LIST_REVOKED,
-	MOD_HDCP_STATUS_HDCP2_ENABLE_STREAM_ENCRYPTION,
+	MOD_HDCP_STATUS_HDCP2_ENABLE_STREAM_ENCRYPTION_FAILURE,
 	MOD_HDCP_STATUS_HDCP2_STREAM_READY_PENDING,
 	MOD_HDCP_STATUS_HDCP2_VALIDATE_STREAM_READY_FAILURE,
 	MOD_HDCP_STATUS_HDCP2_PREPARE_STREAM_MANAGEMENT_FAILURE,
@@ -117,7 +117,6 @@ enum mod_hdcp_operation_mode {
 enum mod_hdcp_display_state {
 	MOD_HDCP_DISPLAY_INACTIVE = 0,
 	MOD_HDCP_DISPLAY_ACTIVE,
-	MOD_HDCP_DISPLAY_ACTIVE_AND_ADDED,
 	MOD_HDCP_DISPLAY_ENCRYPTION_ENABLED
 };
 
diff --git a/drivers/gpu/drm/amd/display/modules/inc/mod_shared.h b/drivers/gpu/drm/amd/display/modules/inc/mod_shared.h
index fe2117904329..198c0e64d13a 100644
--- a/drivers/gpu/drm/amd/display/modules/inc/mod_shared.h
+++ b/drivers/gpu/drm/amd/display/modules/inc/mod_shared.h
@@ -40,8 +40,9 @@ enum color_transfer_func {
 
 enum vrr_packet_type {
 	PACKET_TYPE_VRR,
-	PACKET_TYPE_FS1,
-	PACKET_TYPE_FS2,
+	PACKET_TYPE_FS_V1,
+	PACKET_TYPE_FS_V2,
+	PACKET_TYPE_FS_V3,
 	PACKET_TYPE_VTEM
 };
 
diff --git a/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c b/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c
index cff3ab15fc0c..22a5484d9f28 100644
--- a/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c
+++ b/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c
@@ -29,6 +29,7 @@
 #include "mod_shared.h"
 #include "mod_freesync.h"
 #include "dc.h"
+#include "dmub/inc/dmub_cmd_dal.h"
 
 enum vsc_packet_revision {
 	vsc_packet_undefined = 0,
@@ -144,7 +145,7 @@ void mod_build_vsc_infopacket(const struct dc_stream_state *stream,
 	}
 
 	/*VSC packet set to 2 when DP revision >= 1.2*/
-	if (stream->psr_version != 0)
+	if (stream->link->psr_settings.psr_version != PSR_VERSION_UNSUPPORTED)
 		vsc_packet_revision = vsc_packet_rev2;
 
 	/* Update to revision 5 for extended colorimetry support */
diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
index e75a4bb94488..8c37bcc27132 100644
--- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
+++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
@@ -24,6 +24,9 @@
 
 #include "power_helpers.h"
 #include "dc/inc/hw/dmcu.h"
+#include "dc/inc/hw/abm.h"
+#include "dc.h"
+#include "core_types.h"
 
 #define DIV_ROUNDUP(a, b) (((a)+((b)/2))/(b))
 
@@ -237,7 +240,7 @@ static void fill_backlight_transform_table(struct dmcu_iram_parameters params,
 }
 
 static void fill_backlight_transform_table_v_2_2(struct dmcu_iram_parameters params,
-		struct iram_table_v_2_2 *table)
+		struct iram_table_v_2_2 *table, bool big_endian)
 {
 	unsigned int i;
 	unsigned int num_entries = NUM_BL_CURVE_SEGS;
@@ -261,10 +264,12 @@ static void fill_backlight_transform_table_v_2_2(struct dmcu_iram_parameters par
 		lut_index = (params.backlight_lut_array_size - 1) * i / (num_entries - 1);
 		ASSERT(lut_index < params.backlight_lut_array_size);
 
-		table->backlight_thresholds[i] =
-			cpu_to_be16(DIV_ROUNDUP((i * 65536), num_entries));
-		table->backlight_offsets[i] =
-			cpu_to_be16(params.backlight_lut_array[lut_index]);
+		table->backlight_thresholds[i] = (big_endian) ?
+			cpu_to_be16(DIV_ROUNDUP((i * 65536), num_entries)) :
+			cpu_to_le16(DIV_ROUNDUP((i * 65536), num_entries));
+		table->backlight_offsets[i] = (big_endian) ?
+			cpu_to_be16(params.backlight_lut_array[lut_index]) :
+			cpu_to_le16(params.backlight_lut_array[lut_index]);
 	}
 }
 
@@ -584,18 +589,18 @@ void fill_iram_v_2_2(struct iram_table_v_2_2 *ram_table, struct dmcu_iram_parame
 	ram_table->crgb_slope[7]  = cpu_to_be16(0x1910);
 
 	fill_backlight_transform_table_v_2_2(
-			params, ram_table);
+			params, ram_table, true);
 }
 
-void fill_iram_v_2_3(struct iram_table_v_2_2 *ram_table, struct dmcu_iram_parameters params)
+void fill_iram_v_2_3(struct iram_table_v_2_2 *ram_table, struct dmcu_iram_parameters params, bool big_endian)
 {
 	unsigned int i, j;
 	unsigned int set = params.set;
 
 	ram_table->flags = 0x0;
-
-	ram_table->min_abm_backlight =
-			cpu_to_be16(params.min_abm_backlight);
+	ram_table->min_abm_backlight = (big_endian) ?
+		cpu_to_be16(params.min_abm_backlight) :
+		cpu_to_le16(params.min_abm_backlight);
 
 	for (i = 0; i < NUM_AGGR_LEVEL; i++) {
 		ram_table->hybrid_factor[i] = abm_settings[set][i].brightness_gain;
@@ -619,33 +624,51 @@ void fill_iram_v_2_3(struct iram_table_v_2_2 *ram_table, struct dmcu_iram_parame
 	ram_table->iir_curve[4] = 0x65;
 
 	//Gamma 2.2
-	ram_table->crgb_thresh[0] = cpu_to_be16(0x127c);
-	ram_table->crgb_thresh[1] = cpu_to_be16(0x151b);
-	ram_table->crgb_thresh[2] = cpu_to_be16(0x17d5);
-	ram_table->crgb_thresh[3] = cpu_to_be16(0x1a56);
-	ram_table->crgb_thresh[4] = cpu_to_be16(0x1c83);
-	ram_table->crgb_thresh[5] = cpu_to_be16(0x1e72);
-	ram_table->crgb_thresh[6] = cpu_to_be16(0x20f0);
-	ram_table->crgb_thresh[7] = cpu_to_be16(0x232b);
-	ram_table->crgb_offset[0] = cpu_to_be16(0x2999);
-	ram_table->crgb_offset[1] = cpu_to_be16(0x3999);
-	ram_table->crgb_offset[2] = cpu_to_be16(0x4666);
-	ram_table->crgb_offset[3] = cpu_to_be16(0x5999);
-	ram_table->crgb_offset[4] = cpu_to_be16(0x6333);
-	ram_table->crgb_offset[5] = cpu_to_be16(0x7800);
-	ram_table->crgb_offset[6] = cpu_to_be16(0x8c00);
-	ram_table->crgb_offset[7] = cpu_to_be16(0xa000);
-	ram_table->crgb_slope[0]  = cpu_to_be16(0x3609);
-	ram_table->crgb_slope[1]  = cpu_to_be16(0x2dfa);
-	ram_table->crgb_slope[2]  = cpu_to_be16(0x27ea);
-	ram_table->crgb_slope[3]  = cpu_to_be16(0x235d);
-	ram_table->crgb_slope[4]  = cpu_to_be16(0x2042);
-	ram_table->crgb_slope[5]  = cpu_to_be16(0x1dc3);
-	ram_table->crgb_slope[6]  = cpu_to_be16(0x1b1a);
-	ram_table->crgb_slope[7]  = cpu_to_be16(0x1910);
+	ram_table->crgb_thresh[0] = (big_endian) ? cpu_to_be16(0x127c) : cpu_to_le16(0x127c);
+	ram_table->crgb_thresh[1] = (big_endian) ? cpu_to_be16(0x151b) : cpu_to_le16(0x151b);
+	ram_table->crgb_thresh[2] = (big_endian) ? cpu_to_be16(0x17d5) : cpu_to_le16(0x17d5);
+	ram_table->crgb_thresh[3] = (big_endian) ? cpu_to_be16(0x1a56) : cpu_to_le16(0x1a56);
+	ram_table->crgb_thresh[4] = (big_endian) ? cpu_to_be16(0x1c83) : cpu_to_le16(0x1c83);
+	ram_table->crgb_thresh[5] = (big_endian) ? cpu_to_be16(0x1e72) : cpu_to_le16(0x1e72);
+	ram_table->crgb_thresh[6] = (big_endian) ? cpu_to_be16(0x20f0) : cpu_to_le16(0x20f0);
+	ram_table->crgb_thresh[7] = (big_endian) ? cpu_to_be16(0x232b) : cpu_to_le16(0x232b);
+	ram_table->crgb_offset[0] = (big_endian) ? cpu_to_be16(0x2999) : cpu_to_le16(0x2999);
+	ram_table->crgb_offset[1] = (big_endian) ? cpu_to_be16(0x3999) : cpu_to_le16(0x3999);
+	ram_table->crgb_offset[2] = (big_endian) ? cpu_to_be16(0x4666) : cpu_to_le16(0x4666);
+	ram_table->crgb_offset[3] = (big_endian) ? cpu_to_be16(0x5999) : cpu_to_le16(0x5999);
+	ram_table->crgb_offset[4] = (big_endian) ? cpu_to_be16(0x6333) : cpu_to_le16(0x6333);
+	ram_table->crgb_offset[5] = (big_endian) ? cpu_to_be16(0x7800) : cpu_to_le16(0x7800);
+	ram_table->crgb_offset[6] = (big_endian) ? cpu_to_be16(0x8c00) : cpu_to_le16(0x8c00);
+	ram_table->crgb_offset[7] = (big_endian) ? cpu_to_be16(0xa000) : cpu_to_le16(0xa000);
+	ram_table->crgb_slope[0]  = (big_endian) ? cpu_to_be16(0x3609) : cpu_to_le16(0x3609);
+	ram_table->crgb_slope[1]  = (big_endian) ? cpu_to_be16(0x2dfa) : cpu_to_le16(0x2dfa);
+	ram_table->crgb_slope[2]  = (big_endian) ? cpu_to_be16(0x27ea) : cpu_to_le16(0x27ea);
+	ram_table->crgb_slope[3]  = (big_endian) ? cpu_to_be16(0x235d) : cpu_to_le16(0x235d);
+	ram_table->crgb_slope[4]  = (big_endian) ? cpu_to_be16(0x2042) : cpu_to_le16(0x2042);
+	ram_table->crgb_slope[5]  = (big_endian) ? cpu_to_be16(0x1dc3) : cpu_to_le16(0x1dc3);
+	ram_table->crgb_slope[6]  = (big_endian) ? cpu_to_be16(0x1b1a) : cpu_to_le16(0x1b1a);
+	ram_table->crgb_slope[7]  = (big_endian) ? cpu_to_be16(0x1910) : cpu_to_le16(0x1910);
 
 	fill_backlight_transform_table_v_2_2(
-			params, ram_table);
+			params, ram_table, big_endian);
+}
+
+bool dmub_init_abm_config(struct abm *abm,
+	struct dmcu_iram_parameters params)
+{
+	unsigned char ram_table[IRAM_SIZE];
+	bool result = false;
+
+	if (abm == NULL)
+		return false;
+
+	memset(&ram_table, 0, sizeof(ram_table));
+
+	fill_iram_v_2_3((struct iram_table_v_2_2 *)ram_table, params, false);
+	result = abm->funcs->init_abm_config(
+		abm, (char *)(&ram_table), IRAM_RESERVE_AREA_START_V2_2);
+
+	return result;
 }
 
 bool dmcu_load_iram(struct dmcu *dmcu,
@@ -657,17 +680,17 @@ bool dmcu_load_iram(struct dmcu *dmcu,
 	if (dmcu == NULL)
 		return false;
 
-	if (!dmcu->funcs->is_dmcu_initialized(dmcu))
+	if (dmcu && !dmcu->funcs->is_dmcu_initialized(dmcu))
 		return true;
 
 	memset(&ram_table, 0, sizeof(ram_table));
 
 	if (dmcu->dmcu_version.abm_version == 0x24) {
-		fill_iram_v_2_3((struct iram_table_v_2_2 *)ram_table, params);
-		result = dmcu->funcs->load_iram(
-				dmcu, 0, (char *)(&ram_table), IRAM_RESERVE_AREA_START_V2_2);
+		fill_iram_v_2_3((struct iram_table_v_2_2 *)ram_table, params, true);
+			result = dmcu->funcs->load_iram(
+					dmcu, 0, (char *)(&ram_table), IRAM_RESERVE_AREA_START_V2_2);
 	} else if (dmcu->dmcu_version.abm_version == 0x23) {
-		fill_iram_v_2_3((struct iram_table_v_2_2 *)ram_table, params);
+		fill_iram_v_2_3((struct iram_table_v_2_2 *)ram_table, params, true);
 
 		result = dmcu->funcs->load_iram(
 				dmcu, 0, (char *)(&ram_table), IRAM_RESERVE_AREA_START_V2_2);
diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
index e54157026330..46fbca2e2cd1 100644
--- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
+++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
@@ -26,6 +26,7 @@
 #define MODULES_POWER_POWER_HELPERS_H_
 
 #include "dc/inc/hw/dmcu.h"
+#include "dc/inc/hw/abm.h"
 
 
 enum abm_defines {
@@ -44,5 +45,7 @@ struct dmcu_iram_parameters {
 
 bool dmcu_load_iram(struct dmcu *dmcu,
 		struct dmcu_iram_parameters params);
+bool dmub_init_abm_config(struct abm *abm,
+		struct dmcu_iram_parameters params);
 
 #endif /* MODULES_POWER_POWER_HELPERS_H_ */
diff --git a/drivers/gpu/drm/amd/include/asic_reg/nbif/nbif_6_1_offset.h b/drivers/gpu/drm/amd/include/asic_reg/nbif/nbif_6_1_offset.h
index 68d0ffad28c7..92fd27c26a77 100644
--- a/drivers/gpu/drm/amd/include/asic_reg/nbif/nbif_6_1_offset.h
+++ b/drivers/gpu/drm/amd/include/asic_reg/nbif/nbif_6_1_offset.h
@@ -1162,8 +1162,10 @@
 #define mmRCC_CONFIG_MEMSIZE_BASE_IDX                                                                  0
 #define mmRCC_CONFIG_RESERVED                                                                          0x0de4 // duplicate 
 #define mmRCC_CONFIG_RESERVED_BASE_IDX                                                                 0
+#ifndef mmRCC_IOV_FUNC_IDENTIFIER
 #define mmRCC_IOV_FUNC_IDENTIFIER                                                                      0x0de5 // duplicate 
 #define mmRCC_IOV_FUNC_IDENTIFIER_BASE_IDX                                                             0
+#endif
 
 
 // addressBlock: syshub_mmreg_ind_syshubdec
diff --git a/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_0_offset.h b/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_0_offset.h
index 435462294fbc..a7cd760ebf8f 100644
--- a/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_0_offset.h
+++ b/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_0_offset.h
@@ -4251,8 +4251,10 @@
 #define mmRCC_CONFIG_MEMSIZE_BASE_IDX                                                                  2
 #define mmRCC_CONFIG_RESERVED                                                                          0x00c4
 #define mmRCC_CONFIG_RESERVED_BASE_IDX                                                                 2
+#ifndef mmRCC_IOV_FUNC_IDENTIFIER
 #define mmRCC_IOV_FUNC_IDENTIFIER                                                                      0x00c5
 #define mmRCC_IOV_FUNC_IDENTIFIER_BASE_IDX                                                             2
+#endif
 
 
 // addressBlock: nbio_nbif0_rcc_dev0_BIFDEC1
diff --git a/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_4_offset.h b/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_4_offset.h
index ce5830ebe095..0c5a08bc034a 100644
--- a/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_4_offset.h
+++ b/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_4_offset.h
@@ -2687,8 +2687,10 @@
 #define mmRCC_CONFIG_MEMSIZE_BASE_IDX                                                                  2
 #define mmRCC_CONFIG_RESERVED                                                                          0x00c4
 #define mmRCC_CONFIG_RESERVED_BASE_IDX                                                                 2
+#ifndef mmRCC_IOV_FUNC_IDENTIFIER
 #define mmRCC_IOV_FUNC_IDENTIFIER                                                                      0x00c5
 #define mmRCC_IOV_FUNC_IDENTIFIER_BASE_IDX                                                             2
+#endif
 
 
 // addressBlock: nbio_nbif0_rcc_dev0_BIFDEC1
diff --git a/drivers/gpu/drm/amd/include/asic_reg/pwr/pwr_10_0_offset.h b/drivers/gpu/drm/amd/include/asic_reg/pwr/pwr_10_0_offset.h
new file mode 100644
index 000000000000..e87c359ea1fe
--- /dev/null
+++ b/drivers/gpu/drm/amd/include/asic_reg/pwr/pwr_10_0_offset.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2020  Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+ * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef _pwr_10_0_OFFSET_HEADER
+#define _pwr_10_0_OFFSET_HEADER
+
+#define mmPWR_MISC_CNTL_STATUS                                                                         0x0183
+#define mmPWR_MISC_CNTL_STATUS_BASE_IDX                                                                0
+
+#endif
diff --git a/drivers/gpu/drm/amd/include/asic_reg/pwr/pwr_10_0_sh_mask.h b/drivers/gpu/drm/amd/include/asic_reg/pwr/pwr_10_0_sh_mask.h
new file mode 100644
index 000000000000..8a000c21651c
--- /dev/null
+++ b/drivers/gpu/drm/amd/include/asic_reg/pwr/pwr_10_0_sh_mask.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2020  Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+ * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef _pwr_10_0_SH_MASK_HEADER
+#define _pwr_10_0_SH_MASK_HEADER
+
+//PWR_MISC_CNTL_STATUS
+#define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN__SHIFT                                                      0x0
+#define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS__SHIFT                                                        0x1
+#define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN_MASK                                                        0x00000001L
+#define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS_MASK                                                          0x00000006L
+
+#endif
diff --git a/drivers/gpu/drm/amd/include/asic_reg/smuio/smuio_12_0_0_offset.h b/drivers/gpu/drm/amd/include/asic_reg/smuio/smuio_12_0_0_offset.h
new file mode 100644
index 000000000000..9bf73284ad73
--- /dev/null
+++ b/drivers/gpu/drm/amd/include/asic_reg/smuio/smuio_12_0_0_offset.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2020  Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+ * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef _smuio_12_0_0_OFFSET_HEADER
+#define _smuio_12_0_0_OFFSET_HEADER
+
+#define mmSMUIO_GFX_MISC_CNTL                                                                          0x00c8
+#define mmSMUIO_GFX_MISC_CNTL_BASE_IDX                                                                 0
+
+#define mmPWR_MISC_CNTL_STATUS                                                                         0x0183
+#define mmPWR_MISC_CNTL_STATUS_BASE_IDX                                                                1
+
+#endif
diff --git a/drivers/gpu/drm/amd/include/asic_reg/smuio/smuio_12_0_0_sh_mask.h b/drivers/gpu/drm/amd/include/asic_reg/smuio/smuio_12_0_0_sh_mask.h
new file mode 100644
index 000000000000..26556fa3d054
--- /dev/null
+++ b/drivers/gpu/drm/amd/include/asic_reg/smuio/smuio_12_0_0_sh_mask.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2020  Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+ * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef _smuio_12_0_0_SH_MASK_HEADER
+#define _smuio_12_0_0_SH_MASK_HEADER
+
+//SMUIO_GFX_MISC_CNTL
+#define SMUIO_GFX_MISC_CNTL__PWR_GFXOFF_STATUS_MASK                                                           0x00000006L
+#define SMUIO_GFX_MISC_CNTL__PWR_GFXOFF_STATUS__SHIFT                                                         0x1
+//PWR_MISC_CNTL_STATUS
+#define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN__SHIFT                                                      0x0
+#define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS__SHIFT                                                        0x1
+#define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN_MASK                                                        0x00000001L
+#define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS_MASK                                                          0x00000006L
+
+#endif
diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h
index 70146518174c..a6f6e6bf5992 100644
--- a/drivers/gpu/drm/amd/include/atomfirmware.h
+++ b/drivers/gpu/drm/amd/include/atomfirmware.h
@@ -1876,6 +1876,108 @@ struct atom_smc_dpm_info_v4_6
   uint32_t   boardreserved[10];
 };
 
+struct atom_smc_dpm_info_v4_7
+{
+  struct   atom_common_table_header  table_header;
+    // SECTION: BOARD PARAMETERS
+    // I2C Control
+  struct smudpm_i2c_controller_config_v2  I2cControllers[8];
+
+  // SVI2 Board Parameters
+  uint16_t     MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
+  uint16_t     MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
+
+  uint8_t      VddGfxVrMapping;   // Use VR_MAPPING* bitfields
+  uint8_t      VddSocVrMapping;   // Use VR_MAPPING* bitfields
+  uint8_t      VddMem0VrMapping;  // Use VR_MAPPING* bitfields
+  uint8_t      VddMem1VrMapping;  // Use VR_MAPPING* bitfields
+
+  uint8_t      GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
+  uint8_t      SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
+  uint8_t      ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN)
+  uint8_t      Padding8_V;
+
+  // Telemetry Settings
+  uint16_t     GfxMaxCurrent;   // in Amps
+  uint8_t      GfxOffset;       // in Amps
+  uint8_t      Padding_TelemetryGfx;
+  uint16_t     SocMaxCurrent;   // in Amps
+  uint8_t      SocOffset;       // in Amps
+  uint8_t      Padding_TelemetrySoc;
+
+  uint16_t     Mem0MaxCurrent;   // in Amps
+  uint8_t      Mem0Offset;       // in Amps
+  uint8_t      Padding_TelemetryMem0;
+
+  uint16_t     Mem1MaxCurrent;   // in Amps
+  uint8_t      Mem1Offset;       // in Amps
+  uint8_t      Padding_TelemetryMem1;
+
+  // GPIO Settings
+  uint8_t      AcDcGpio;        // GPIO pin configured for AC/DC switching
+  uint8_t      AcDcPolarity;    // GPIO polarity for AC/DC switching
+  uint8_t      VR0HotGpio;      // GPIO pin configured for VR0 HOT event
+  uint8_t      VR0HotPolarity;  // GPIO polarity for VR0 HOT event
+
+  uint8_t      VR1HotGpio;      // GPIO pin configured for VR1 HOT event
+  uint8_t      VR1HotPolarity;  // GPIO polarity for VR1 HOT event
+  uint8_t      GthrGpio;        // GPIO pin configured for GTHR Event
+  uint8_t      GthrPolarity;    // replace GPIO polarity for GTHR
+
+  // LED Display Settings
+  uint8_t      LedPin0;         // GPIO number for LedPin[0]
+  uint8_t      LedPin1;         // GPIO number for LedPin[1]
+  uint8_t      LedPin2;         // GPIO number for LedPin[2]
+  uint8_t      padding8_4;
+
+  // GFXCLK PLL Spread Spectrum
+  uint8_t      PllGfxclkSpreadEnabled;   // on or off
+  uint8_t      PllGfxclkSpreadPercent;   // Q4.4
+  uint16_t     PllGfxclkSpreadFreq;      // kHz
+
+  // GFXCLK DFLL Spread Spectrum
+  uint8_t      DfllGfxclkSpreadEnabled;   // on or off
+  uint8_t      DfllGfxclkSpreadPercent;   // Q4.4
+  uint16_t     DfllGfxclkSpreadFreq;      // kHz
+
+  // UCLK Spread Spectrum
+  uint8_t      UclkSpreadEnabled;   // on or off
+  uint8_t      UclkSpreadPercent;   // Q4.4
+  uint16_t     UclkSpreadFreq;      // kHz
+
+  // SOCCLK Spread Spectrum
+  uint8_t      SoclkSpreadEnabled;   // on or off
+  uint8_t      SocclkSpreadPercent;   // Q4.4
+  uint16_t     SocclkSpreadFreq;      // kHz
+
+  // Total board power
+  uint16_t     TotalBoardPower;     //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
+  uint16_t     BoardPadding;
+
+  // Mvdd Svi2 Div Ratio Setting
+  uint32_t     MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16)
+
+  // GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence
+  uint8_t      GpioI2cScl;          // Serial Clock
+  uint8_t      GpioI2cSda;          // Serial Data
+  uint16_t     GpioPadding;
+
+  // Additional LED Display Settings
+  uint8_t      LedPin3;         // GPIO number for LedPin[3] - PCIE GEN Speed
+  uint8_t      LedPin4;         // GPIO number for LedPin[4] - PMFW Error Status
+  uint16_t     LedEnableMask;
+
+  // Power Limit Scalars
+  uint8_t      PowerLimitScalar[4];    //[PPT_THROTTLER_COUNT]
+
+  uint8_t      MvddUlvPhaseSheddingMask;
+  uint8_t      VddciUlvPhaseSheddingMask;
+  uint8_t      Padding8_Psi1;
+  uint8_t      Padding8_Psi2;
+
+  uint32_t     BoardReserved[5];
+};
+
 /* 
   ***************************************************************************
     Data Table asic_profiling_info  structure
diff --git a/drivers/gpu/drm/amd/include/cgs_common.h b/drivers/gpu/drm/amd/include/cgs_common.h
index a69deb3a2ac0..60a6536ff656 100644
--- a/drivers/gpu/drm/amd/include/cgs_common.h
+++ b/drivers/gpu/drm/amd/include/cgs_common.h
@@ -32,7 +32,6 @@ struct cgs_device;
  * enum cgs_ind_reg - Indirect register spaces
  */
 enum cgs_ind_reg {
-	CGS_IND_REG__MMIO,
 	CGS_IND_REG__PCIE,
 	CGS_IND_REG__SMC,
 	CGS_IND_REG__UVD_CTX,
diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index 2a12614a12c2..fc31499c2e5c 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -50,6 +50,7 @@ static int amd_powerplay_create(struct amdgpu_device *adev)
 	hwmgr->not_vf = !amdgpu_sriov_vf(adev);
 	hwmgr->device = amdgpu_cgs_create_device(adev);
 	mutex_init(&hwmgr->smu_lock);
+	mutex_init(&hwmgr->msg_lock);
 	hwmgr->chip_family = adev->family;
 	hwmgr->chip_id = adev->asic_type;
 	hwmgr->feature_mask = adev->pm.pp_feature;
@@ -64,6 +65,8 @@ static void amd_powerplay_destroy(struct amdgpu_device *adev)
 {
 	struct pp_hwmgr *hwmgr = adev->powerplay.pp_handle;
 
+	mutex_destroy(&hwmgr->msg_lock);
+
 	kfree(hwmgr->hardcode_pp_table);
 	hwmgr->hardcode_pp_table = NULL;
 
@@ -1435,7 +1438,8 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_capability)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_capability)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
@@ -1452,8 +1456,7 @@ static int pp_get_asic_baco_state(void *handle, int *state)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!(hwmgr->not_vf && amdgpu_dpm) ||
-		!hwmgr->hwmgr_func->get_asic_baco_state)
+	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_state)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
@@ -1470,7 +1473,8 @@ static int pp_set_asic_baco_state(void *handle, int state)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->set_asic_baco_state)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->set_asic_baco_state)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
index e8b27fab6aa1..5964d6323a13 100644
--- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
@@ -62,6 +62,7 @@ const char *smu_get_feature_name(struct smu_context *smu, enum smu_feature_mask
 
 size_t smu_sys_get_pp_feature_mask(struct smu_context *smu, char *buf)
 {
+	struct amdgpu_device *adev = smu->adev;
 	size_t size = 0;
 	int ret = 0, i = 0;
 	uint32_t feature_mask[2] = { 0 };
@@ -70,6 +71,9 @@ size_t smu_sys_get_pp_feature_mask(struct smu_context *smu, char *buf)
 	uint32_t sort_feature[SMU_FEATURE_COUNT];
 	uint64_t hw_feature_count = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	ret = smu_feature_get_enabled_mask(smu, feature_mask, 2);
@@ -110,9 +114,6 @@ static int smu_feature_update_enable_state(struct smu_context *smu,
 	uint32_t feature_low = 0, feature_high = 0;
 	int ret = 0;
 
-	if (!smu->pm_enabled)
-		return ret;
-
 	feature_low = (feature_mask >> 0 ) & 0xffffffff;
 	feature_high = (feature_mask >> 32) & 0xffffffff;
 
@@ -155,6 +156,10 @@ int smu_sys_set_pp_feature_mask(struct smu_context *smu, uint64_t new_mask)
 	uint64_t feature_2_enabled = 0;
 	uint64_t feature_2_disabled = 0;
 	uint64_t feature_enables = 0;
+	struct amdgpu_device *adev = smu->adev;
+
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
 
 	mutex_lock(&smu->mutex);
 
@@ -191,16 +196,31 @@ int smu_get_smc_version(struct smu_context *smu, uint32_t *if_version, uint32_t
 	if (!if_version && !smu_version)
 		return -EINVAL;
 
+	if (smu->smc_fw_if_version && smu->smc_fw_version)
+	{
+		if (if_version)
+			*if_version = smu->smc_fw_if_version;
+
+		if (smu_version)
+			*smu_version = smu->smc_fw_version;
+
+		return 0;
+	}
+
 	if (if_version) {
 		ret = smu_send_smc_msg(smu, SMU_MSG_GetDriverIfVersion, if_version);
 		if (ret)
 			return ret;
+
+		smu->smc_fw_if_version = *if_version;
 	}
 
 	if (smu_version) {
 		ret = smu_send_smc_msg(smu, SMU_MSG_GetSmuVersion, smu_version);
 		if (ret)
 			return ret;
+
+		smu->smc_fw_version = *smu_version;
 	}
 
 	return ret;
@@ -327,13 +347,13 @@ int smu_get_dpm_freq_by_index(struct smu_context *smu, enum smu_clk_type clk_typ
 	param = (uint32_t)(((clk_id & 0xffff) << 16) | (level & 0xffff));
 
 	ret = smu_send_smc_msg_with_param(smu, SMU_MSG_GetDpmFreqByIndex,
-					  param, &param);
+					  param, value);
 	if (ret)
 		return ret;
 
 	/* BIT31:  0 - Fine grained DPM, 1 - Dicrete DPM
 	 * now, we un-support it */
-	*value = param & 0x7fffffff;
+	*value = *value & 0x7fffffff;
 
 	return ret;
 }
@@ -417,8 +437,12 @@ bool smu_clk_dpm_is_enabled(struct smu_context *smu, enum smu_clk_type clk_type)
 int smu_dpm_set_power_gate(struct smu_context *smu, uint32_t block_type,
 			   bool gate)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	switch (block_type) {
 	case AMD_IP_BLOCK_TYPE_UVD:
 		ret = smu_dpm_set_uvd_enable(smu, !gate);
@@ -511,7 +535,6 @@ int smu_update_table(struct smu_context *smu, enum smu_table_id table_index, int
 	int table_id = smu_table_get_index(smu, table_index);
 	uint32_t table_size;
 	int ret = 0;
-
 	if (!table_data || table_id >= SMU_TABLE_COUNT || table_id < 0)
 		return -EINVAL;
 
@@ -547,12 +570,10 @@ bool is_support_sw_smu(struct amdgpu_device *adev)
 	if (adev->asic_type == CHIP_VEGA20)
 		return (amdgpu_dpm == 2) ? true : false;
 	else if (adev->asic_type >= CHIP_ARCTURUS) {
-		if (amdgpu_sriov_vf(adev)&& !amdgpu_sriov_is_pp_one_vf(adev))
-			return false;
-		else
+	      if (amdgpu_sriov_is_pp_one_vf(adev) || !amdgpu_sriov_vf(adev))
 			return true;
-	} else
-		return false;
+	}
+	return false;
 }
 
 bool is_support_sw_smu_xgmi(struct amdgpu_device *adev)
@@ -569,8 +590,12 @@ bool is_support_sw_smu_xgmi(struct amdgpu_device *adev)
 int smu_sys_get_pp_table(struct smu_context *smu, void **table)
 {
 	struct smu_table_context *smu_table = &smu->smu_table;
+	struct amdgpu_device *adev = smu->adev;
 	uint32_t powerplay_table_size;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	if (!smu_table->power_play_table && !smu_table->hardcode_pptable)
 		return -EINVAL;
 
@@ -591,11 +616,13 @@ int smu_sys_get_pp_table(struct smu_context *smu, void **table)
 int smu_sys_set_pp_table(struct smu_context *smu,  void *buf, size_t size)
 {
 	struct smu_table_context *smu_table = &smu->smu_table;
+	struct amdgpu_device *adev = smu->adev;
 	ATOM_COMMON_TABLE_HEADER *header = (ATOM_COMMON_TABLE_HEADER *)buf;
 	int ret = 0;
 
-	if (!smu->pm_enabled)
+	if (!adev->pm.dpm_enabled)
 		return -EINVAL;
+
 	if (header->usStructureSize != size) {
 		pr_err("pp table size not matched !\n");
 		return -EIO;
@@ -636,8 +663,6 @@ int smu_feature_init_dpm(struct smu_context *smu)
 	int ret = 0;
 	uint32_t allowed_feature_mask[SMU_FEATURE_MAX/32];
 
-	if (!smu->pm_enabled)
-		return ret;
 	mutex_lock(&feature->mutex);
 	bitmap_zero(feature->allowed, SMU_FEATURE_MAX);
 	mutex_unlock(&feature->mutex);
@@ -665,7 +690,6 @@ int smu_feature_is_enabled(struct smu_context *smu, enum smu_feature_mask mask)
 
 	if (smu->is_apu)
 		return 1;
-
 	feature_id = smu_feature_get_index(smu, mask);
 	if (feature_id < 0)
 		return 0;
@@ -932,13 +956,6 @@ static int smu_sw_init(void *handle)
 		return ret;
 	}
 
-	if (adev->smu.ppt_funcs->i2c_eeprom_init) {
-		ret = smu_i2c_eeprom_init(smu, &adev->pm.smu_i2c);
-
-		if (ret)
-			return ret;
-	}
-
 	return 0;
 }
 
@@ -948,9 +965,6 @@ static int smu_sw_fini(void *handle)
 	struct smu_context *smu = &adev->smu;
 	int ret;
 
-	if (adev->smu.ppt_funcs->i2c_eeprom_fini)
-		smu_i2c_eeprom_fini(smu, &adev->pm.smu_i2c);
-
 	kfree(smu->irq_source);
 	smu->irq_source = NULL;
 
@@ -1323,6 +1337,9 @@ static int smu_hw_init(void *handle)
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 	struct smu_context *smu = &adev->smu;
 
+	if (amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev))
+		return 0;
+
 	ret = smu_start_smc_engine(smu);
 	if (ret) {
 		pr_err("SMU is not ready yet!\n");
@@ -1336,9 +1353,6 @@ static int smu_hw_init(void *handle)
 		smu_set_gfx_cgpg(&adev->smu, true);
 	}
 
-	if (amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev))
-		return 0;
-
 	if (!smu->pm_enabled)
 		return 0;
 
@@ -1366,10 +1380,11 @@ static int smu_hw_init(void *handle)
 	if (ret)
 		goto failed;
 
-	if (!smu->pm_enabled)
-		adev->pm.dpm_enabled = false;
-	else
-		adev->pm.dpm_enabled = true;	/* TODO: will set dpm_enabled flag while VCN and DAL DPM is workable */
+	ret = smu_i2c_eeprom_init(smu, &adev->pm.smu_i2c);
+	if (ret)
+		goto failed;
+
+	adev->pm.dpm_enabled = true;
 
 	pr_info("SMU is initialized successfully!\n");
 
@@ -1381,6 +1396,9 @@ static int smu_hw_init(void *handle)
 
 static int smu_stop_dpms(struct smu_context *smu)
 {
+	if (amdgpu_sriov_vf(smu->adev))
+		return 0;
+
 	return smu_system_features_control(smu, false);
 }
 
@@ -1403,6 +1421,10 @@ static int smu_hw_fini(void *handle)
 	if (!smu->pm_enabled)
 		return 0;
 
+	adev->pm.dpm_enabled = false;
+
+	smu_i2c_eeprom_fini(smu, &adev->pm.smu_i2c);
+
 	if (!amdgpu_sriov_vf(adev)){
 		ret = smu_stop_thermal_control(smu);
 		if (ret) {
@@ -1542,6 +1564,10 @@ static int smu_suspend(void *handle)
 	if (!smu->pm_enabled)
 		return 0;
 
+	adev->pm.dpm_enabled = false;
+
+	smu_i2c_eeprom_fini(smu, &adev->pm.smu_i2c);
+
 	if(!amdgpu_sriov_vf(adev)) {
 		ret = smu_disable_dpm(smu);
 		if (ret)
@@ -1587,11 +1613,17 @@ static int smu_resume(void *handle)
 	if (ret)
 		goto failed;
 
+	ret = smu_i2c_eeprom_init(smu, &adev->pm.smu_i2c);
+	if (ret)
+		goto failed;
+
 	if (smu->is_apu)
 		smu_set_gfx_cgpg(&adev->smu, true);
 
 	smu->disable_uclk_switch = 0;
 
+	adev->pm.dpm_enabled = true;
+
 	pr_info("SMU is resumed successfully!\n");
 
 	return 0;
@@ -1603,10 +1635,14 @@ static int smu_resume(void *handle)
 int smu_display_configuration_change(struct smu_context *smu,
 				     const struct amd_pp_display_configuration *display_config)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int index = 0;
 	int num_of_active_display = 0;
 
-	if (!smu->pm_enabled || !is_support_sw_smu(smu->adev))
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
+	if (!is_support_sw_smu(smu->adev))
 		return -EINVAL;
 
 	if (!display_config)
@@ -1668,12 +1704,16 @@ int smu_get_current_clocks(struct smu_context *smu,
 			   struct amd_pp_clock_info *clocks)
 {
 	struct amd_pp_simple_clock_info simple_clocks = {0};
+	struct amdgpu_device *adev = smu->adev;
 	struct smu_clock_info hw_clocks;
 	int ret = 0;
 
 	if (!is_support_sw_smu(smu->adev))
 		return -EINVAL;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	smu_get_dal_power_level(smu, &simple_clocks);
@@ -1736,7 +1776,7 @@ static int smu_enable_umd_pstate(void *handle,
 	struct smu_context *smu = (struct smu_context*)(handle);
 	struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
 
-	if (!smu->is_apu && (!smu->pm_enabled || !smu_dpm_ctx->dpm_context))
+	if (!smu->is_apu && !smu_dpm_ctx->dpm_context)
 		return -EINVAL;
 
 	if (!(smu_dpm_ctx->dpm_level & profile_mode_mask)) {
@@ -1778,9 +1818,6 @@ int smu_adjust_power_state_dynamic(struct smu_context *smu,
 	long workload;
 	struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
 
-	if (!smu->pm_enabled)
-		return -EINVAL;
-
 	if (!skip_display_settings) {
 		ret = smu_display_config_changed(smu);
 		if (ret) {
@@ -1831,8 +1868,12 @@ int smu_handle_task(struct smu_context *smu,
 		    enum amd_pp_task task_id,
 		    bool lock_needed)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	if (lock_needed)
 		mutex_lock(&smu->mutex);
 
@@ -1866,10 +1907,11 @@ int smu_switch_power_profile(struct smu_context *smu,
 			     bool en)
 {
 	struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
+	struct amdgpu_device *adev = smu->adev;
 	long workload;
 	uint32_t index;
 
-	if (!smu->pm_enabled)
+	if (!adev->pm.dpm_enabled)
 		return -EINVAL;
 
 	if (!(type < PP_SMC_POWER_PROFILE_CUSTOM))
@@ -1900,8 +1942,12 @@ int smu_switch_power_profile(struct smu_context *smu,
 enum amd_dpm_forced_level smu_get_performance_level(struct smu_context *smu)
 {
 	struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
+	struct amdgpu_device *adev = smu->adev;
 	enum amd_dpm_forced_level level;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	if (!smu->is_apu && !smu_dpm_ctx->dpm_context)
 		return -EINVAL;
 
@@ -1915,8 +1961,12 @@ enum amd_dpm_forced_level smu_get_performance_level(struct smu_context *smu)
 int smu_force_performance_level(struct smu_context *smu, enum amd_dpm_forced_level level)
 {
 	struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	if (!smu->is_apu && !smu_dpm_ctx->dpm_context)
 		return -EINVAL;
 
@@ -1939,8 +1989,12 @@ int smu_force_performance_level(struct smu_context *smu, enum amd_dpm_forced_lev
 
 int smu_set_display_count(struct smu_context *smu, uint32_t count)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 	ret = smu_init_display_count(smu, count);
 	mutex_unlock(&smu->mutex);
@@ -1954,8 +2008,12 @@ int smu_force_clk_levels(struct smu_context *smu,
 			 bool lock_needed)
 {
 	struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	if (smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL) {
 		pr_debug("force clock level is for dpm manual mode only.\n");
 		return -EINVAL;
@@ -1973,20 +2031,19 @@ int smu_force_clk_levels(struct smu_context *smu,
 	return ret;
 }
 
+/*
+ * On system suspending or resetting, the dpm_enabled
+ * flag will be cleared. So that those SMU services which
+ * are not supported will be gated.
+ * However, the mp1 state setting should still be granted
+ * even if the dpm_enabled cleared.
+ */
 int smu_set_mp1_state(struct smu_context *smu,
 		      enum pp_mp1_state mp1_state)
 {
 	uint16_t msg;
 	int ret;
 
-	/*
-	 * The SMC is not fully ready. That may be
-	 * expected as the IP may be masked.
-	 * So, just return without error.
-	 */
-	if (!smu->pm_enabled)
-		return 0;
-
 	mutex_lock(&smu->mutex);
 
 	switch (mp1_state) {
@@ -2023,15 +2080,11 @@ int smu_set_mp1_state(struct smu_context *smu,
 int smu_set_df_cstate(struct smu_context *smu,
 		      enum pp_df_cstate state)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
-	/*
-	 * The SMC is not fully ready. That may be
-	 * expected as the IP may be masked.
-	 * So, just return without error.
-	 */
-	if (!smu->pm_enabled)
-		return 0;
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
 
 	if (!smu->ppt_funcs || !smu->ppt_funcs->set_df_cstate)
 		return 0;
@@ -2065,6 +2118,10 @@ int smu_set_watermarks_for_clock_ranges(struct smu_context *smu,
 		struct dm_pp_wm_sets_with_clock_ranges_soc15 *clock_ranges)
 {
 	void *table = smu->smu_table.watermarks_table;
+	struct amdgpu_device *adev = smu->adev;
+
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
 
 	if (!table)
 		return -EINVAL;
@@ -2089,8 +2146,12 @@ int smu_set_watermarks_for_clock_ranges(struct smu_context *smu,
 
 int smu_set_ac_dc(struct smu_context *smu)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	/* controlled by firmware */
 	if (smu->dc_controlled_by_gpio)
 		return 0;
@@ -2149,8 +2210,12 @@ const struct amdgpu_ip_block_version smu_v12_0_ip_block =
 
 int smu_load_microcode(struct smu_context *smu)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->load_microcode)
@@ -2163,8 +2228,12 @@ int smu_load_microcode(struct smu_context *smu)
 
 int smu_check_fw_status(struct smu_context *smu)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->check_fw_status)
@@ -2191,8 +2260,12 @@ int smu_set_gfx_cgpg(struct smu_context *smu, bool enabled)
 
 int smu_set_fan_speed_rpm(struct smu_context *smu, uint32_t speed)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->set_fan_speed_rpm)
@@ -2208,10 +2281,15 @@ int smu_get_power_limit(struct smu_context *smu,
 			bool def,
 			bool lock_needed)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
-	if (lock_needed)
+	if (lock_needed) {
+		if (!adev->pm.dpm_enabled)
+			return -EINVAL;
+
 		mutex_lock(&smu->mutex);
+	}
 
 	if (smu->ppt_funcs->get_power_limit)
 		ret = smu->ppt_funcs->get_power_limit(smu, limit, def);
@@ -2224,8 +2302,12 @@ int smu_get_power_limit(struct smu_context *smu,
 
 int smu_set_power_limit(struct smu_context *smu, uint32_t limit)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->set_power_limit)
@@ -2238,8 +2320,12 @@ int smu_set_power_limit(struct smu_context *smu, uint32_t limit)
 
 int smu_print_clk_levels(struct smu_context *smu, enum smu_clk_type clk_type, char *buf)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->print_clk_levels)
@@ -2252,8 +2338,12 @@ int smu_print_clk_levels(struct smu_context *smu, enum smu_clk_type clk_type, ch
 
 int smu_get_od_percentage(struct smu_context *smu, enum smu_clk_type type)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_od_percentage)
@@ -2266,8 +2356,12 @@ int smu_get_od_percentage(struct smu_context *smu, enum smu_clk_type type)
 
 int smu_set_od_percentage(struct smu_context *smu, enum smu_clk_type type, uint32_t value)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->set_od_percentage)
@@ -2282,8 +2376,12 @@ int smu_od_edit_dpm_table(struct smu_context *smu,
 			  enum PP_OD_DPM_TABLE_COMMAND type,
 			  long *input, uint32_t size)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->od_edit_dpm_table)
@@ -2298,8 +2396,12 @@ int smu_read_sensor(struct smu_context *smu,
 		    enum amd_pp_sensors sensor,
 		    void *data, uint32_t *size)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->read_sensor)
@@ -2312,8 +2414,12 @@ int smu_read_sensor(struct smu_context *smu,
 
 int smu_get_power_profile_mode(struct smu_context *smu, char *buf)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_power_profile_mode)
@@ -2329,8 +2435,12 @@ int smu_set_power_profile_mode(struct smu_context *smu,
 			       uint32_t param_size,
 			       bool lock_needed)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	if (lock_needed)
 		mutex_lock(&smu->mutex);
 
@@ -2346,8 +2456,12 @@ int smu_set_power_profile_mode(struct smu_context *smu,
 
 int smu_get_fan_control_mode(struct smu_context *smu)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_fan_control_mode)
@@ -2360,8 +2474,12 @@ int smu_get_fan_control_mode(struct smu_context *smu)
 
 int smu_set_fan_control_mode(struct smu_context *smu, int value)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->set_fan_control_mode)
@@ -2374,8 +2492,12 @@ int smu_set_fan_control_mode(struct smu_context *smu, int value)
 
 int smu_get_fan_speed_percent(struct smu_context *smu, uint32_t *speed)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_fan_speed_percent)
@@ -2388,8 +2510,12 @@ int smu_get_fan_speed_percent(struct smu_context *smu, uint32_t *speed)
 
 int smu_set_fan_speed_percent(struct smu_context *smu, uint32_t speed)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->set_fan_speed_percent)
@@ -2402,8 +2528,12 @@ int smu_set_fan_speed_percent(struct smu_context *smu, uint32_t speed)
 
 int smu_get_fan_speed_rpm(struct smu_context *smu, uint32_t *speed)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_fan_speed_rpm)
@@ -2416,8 +2546,12 @@ int smu_get_fan_speed_rpm(struct smu_context *smu, uint32_t *speed)
 
 int smu_set_deep_sleep_dcefclk(struct smu_context *smu, int clk)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->set_deep_sleep_dcefclk)
@@ -2430,8 +2564,12 @@ int smu_set_deep_sleep_dcefclk(struct smu_context *smu, int clk)
 
 int smu_set_active_display_count(struct smu_context *smu, uint32_t count)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	if (smu->ppt_funcs->set_active_display_count)
 		ret = smu->ppt_funcs->set_active_display_count(smu, count);
 
@@ -2442,8 +2580,12 @@ int smu_get_clock_by_type(struct smu_context *smu,
 			  enum amd_pp_clock_type type,
 			  struct amd_pp_clocks *clocks)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_clock_by_type)
@@ -2457,8 +2599,12 @@ int smu_get_clock_by_type(struct smu_context *smu,
 int smu_get_max_high_clocks(struct smu_context *smu,
 			    struct amd_pp_simple_clock_info *clocks)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_max_high_clocks)
@@ -2473,8 +2619,12 @@ int smu_get_clock_by_type_with_latency(struct smu_context *smu,
 				       enum smu_clk_type clk_type,
 				       struct pp_clock_levels_with_latency *clocks)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_clock_by_type_with_latency)
@@ -2489,8 +2639,12 @@ int smu_get_clock_by_type_with_voltage(struct smu_context *smu,
 				       enum amd_pp_clock_type type,
 				       struct pp_clock_levels_with_voltage *clocks)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_clock_by_type_with_voltage)
@@ -2505,8 +2659,12 @@ int smu_get_clock_by_type_with_voltage(struct smu_context *smu,
 int smu_display_clock_voltage_request(struct smu_context *smu,
 				      struct pp_display_clock_request *clock_req)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->display_clock_voltage_request)
@@ -2520,8 +2678,12 @@ int smu_display_clock_voltage_request(struct smu_context *smu,
 
 int smu_display_disable_memory_clock_switch(struct smu_context *smu, bool disable_memory_clock_switch)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = -EINVAL;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->display_disable_memory_clock_switch)
@@ -2534,8 +2696,12 @@ int smu_display_disable_memory_clock_switch(struct smu_context *smu, bool disabl
 
 int smu_notify_smu_enable_pwe(struct smu_context *smu)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->notify_smu_enable_pwe)
@@ -2549,8 +2715,12 @@ int smu_notify_smu_enable_pwe(struct smu_context *smu)
 int smu_set_xgmi_pstate(struct smu_context *smu,
 			uint32_t pstate)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->set_xgmi_pstate)
@@ -2563,8 +2733,12 @@ int smu_set_xgmi_pstate(struct smu_context *smu,
 
 int smu_set_azalia_d3_pme(struct smu_context *smu)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->set_azalia_d3_pme)
@@ -2575,6 +2749,14 @@ int smu_set_azalia_d3_pme(struct smu_context *smu)
 	return ret;
 }
 
+/*
+ * On system suspending or resetting, the dpm_enabled
+ * flag will be cleared. So that those SMU services which
+ * are not supported will be gated.
+ *
+ * However, the baco/mode1 reset should still be granted
+ * as they are still supported and necessary.
+ */
 bool smu_baco_is_support(struct smu_context *smu)
 {
 	bool ret = false;
@@ -2646,8 +2828,12 @@ int smu_mode2_reset(struct smu_context *smu)
 int smu_get_max_sustainable_clocks_by_dc(struct smu_context *smu,
 					 struct pp_smu_nv_clock_table *max_clocks)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_max_sustainable_clocks_by_dc)
@@ -2662,8 +2848,12 @@ int smu_get_uclk_dpm_states(struct smu_context *smu,
 			    unsigned int *clock_values_in_khz,
 			    unsigned int *num_states)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_uclk_dpm_states)
@@ -2677,6 +2867,10 @@ int smu_get_uclk_dpm_states(struct smu_context *smu,
 enum amd_pm_state_type smu_get_current_power_state(struct smu_context *smu)
 {
 	enum amd_pm_state_type pm_state = POWER_STATE_TYPE_DEFAULT;
+	struct amdgpu_device *adev = smu->adev;
+
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
 
 	mutex_lock(&smu->mutex);
 
@@ -2691,8 +2885,12 @@ enum amd_pm_state_type smu_get_current_power_state(struct smu_context *smu)
 int smu_get_dpm_clock_table(struct smu_context *smu,
 			    struct dpm_clocks *clock_table)
 {
+	struct amdgpu_device *adev = smu->adev;
 	int ret = 0;
 
+	if (!adev->pm.dpm_enabled)
+		return -EINVAL;
+
 	mutex_lock(&smu->mutex);
 
 	if (smu->ppt_funcs->get_dpm_clock_table)
diff --git a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
index 1ef0923f7190..1c66b7d7139c 100644
--- a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
@@ -2226,12 +2226,8 @@ static const struct i2c_algorithm arcturus_i2c_eeprom_i2c_algo = {
 static int arcturus_i2c_eeprom_control_init(struct i2c_adapter *control)
 {
 	struct amdgpu_device *adev = to_amdgpu_device(control);
-	struct smu_context *smu = &adev->smu;
 	int res;
 
-	if (!smu->pm_enabled)
-		return -EOPNOTSUPP;
-
 	control->owner = THIS_MODULE;
 	control->class = I2C_CLASS_SPD;
 	control->dev.parent = &adev->pdev->dev;
@@ -2247,12 +2243,6 @@ static int arcturus_i2c_eeprom_control_init(struct i2c_adapter *control)
 
 static void arcturus_i2c_eeprom_control_fini(struct i2c_adapter *control)
 {
-	struct amdgpu_device *adev = to_amdgpu_device(control);
-	struct smu_context *smu = &adev->smu;
-
-	if (!smu->pm_enabled)
-		return;
-
 	i2c_del_adapter(control);
 }
 
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c
index 689072a312a7..1cc30f750c26 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c
@@ -36,6 +36,8 @@
 #include "power_state.h"
 #include "soc15_common.h"
 #include "smu10.h"
+#include "asic_reg/pwr/pwr_10_0_offset.h"
+#include "asic_reg/pwr/pwr_10_0_sh_mask.h"
 
 #define SMU10_MAX_DEEPSLEEP_DIVIDER_ID     5
 #define SMU10_MINIMUM_ENGINE_CLOCK         800   /* 8Mhz, the low boundary of engine clock allowed on this chip */
@@ -43,13 +45,6 @@
 #define SMU10_DISPCLK_BYPASS_THRESHOLD     10000 /* 100Mhz */
 #define SMC_RAM_END                     0x40000
 
-#define mmPWR_MISC_CNTL_STATUS					0x0183
-#define mmPWR_MISC_CNTL_STATUS_BASE_IDX				0
-#define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN__SHIFT	0x0
-#define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS__SHIFT		0x1
-#define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN_MASK		0x00000001L
-#define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS_MASK		0x00000006L
-
 static const unsigned long SMU10_Magic = (unsigned long) PHM_Rv_Magic;
 
 
@@ -81,7 +76,7 @@ static int smu10_display_clock_voltage_request(struct pp_hwmgr *hwmgr,
 		pr_info("[DisplayClockVoltageRequest]Invalid Clock Type!");
 		return -EINVAL;
 	}
-	smum_send_msg_to_smc_with_parameter(hwmgr, msg, clk_freq);
+	smum_send_msg_to_smc_with_parameter(hwmgr, msg, clk_freq, NULL);
 
 	return 0;
 }
@@ -214,7 +209,8 @@ static int smu10_set_min_deep_sleep_dcefclk(struct pp_hwmgr *hwmgr, uint32_t clo
 		smu10_data->deep_sleep_dcefclk = clock;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetMinDeepSleepDcefclk,
-					smu10_data->deep_sleep_dcefclk);
+					smu10_data->deep_sleep_dcefclk,
+					NULL);
 	}
 	return 0;
 }
@@ -228,7 +224,8 @@ static int smu10_set_hard_min_dcefclk_by_freq(struct pp_hwmgr *hwmgr, uint32_t c
 		smu10_data->dcf_actual_hard_min_freq = clock;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetHardMinDcefclkByFreq,
-					smu10_data->dcf_actual_hard_min_freq);
+					smu10_data->dcf_actual_hard_min_freq,
+					NULL);
 	}
 	return 0;
 }
@@ -242,7 +239,8 @@ static int smu10_set_hard_min_fclk_by_freq(struct pp_hwmgr *hwmgr, uint32_t cloc
 		smu10_data->f_actual_hard_min_freq = clock;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetHardMinFclkByFreq,
-					smu10_data->f_actual_hard_min_freq);
+					smu10_data->f_actual_hard_min_freq,
+					NULL);
 	}
 	return 0;
 }
@@ -255,7 +253,8 @@ static int smu10_set_active_display_count(struct pp_hwmgr *hwmgr, uint32_t count
 		smu10_data->num_active_display = count;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetDisplayCount,
-				smu10_data->num_active_display);
+				smu10_data->num_active_display,
+				NULL);
 	}
 
 	return 0;
@@ -278,7 +277,8 @@ static int smu10_init_power_gate_state(struct pp_hwmgr *hwmgr)
 	if (adev->pg_flags & AMD_PG_SUPPORT_GFX_PG)
 		return smum_send_msg_to_smc_with_parameter(hwmgr,
 							   PPSMC_MSG_SetGfxCGPG,
-							   true);
+							   true,
+							   NULL);
 	else
 		return 0;
 }
@@ -324,7 +324,7 @@ static int smu10_disable_gfx_off(struct pp_hwmgr *hwmgr)
 	struct amdgpu_device *adev = hwmgr->adev;
 
 	if (adev->pm.pp_feature & PP_GFXOFF_MASK) {
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisableGfxOff);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisableGfxOff, NULL);
 
 		/* confirm gfx is back to "on" state */
 		while (!smu10_is_gfx_on(hwmgr))
@@ -344,7 +344,7 @@ static int smu10_enable_gfx_off(struct pp_hwmgr *hwmgr)
 	struct amdgpu_device *adev = hwmgr->adev;
 
 	if (adev->pm.pp_feature & PP_GFXOFF_MASK)
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableGfxOff);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableGfxOff, NULL);
 
 	return 0;
 }
@@ -479,12 +479,10 @@ static int smu10_populate_clock_table(struct pp_hwmgr *hwmgr)
 	smu10_get_clock_voltage_dependency_table(hwmgr, &pinfo->vdd_dep_on_phyclk,
 					ARRAY_SIZE(VddPhyClk), &VddPhyClk[0]);
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMinGfxclkFrequency);
-	result = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMinGfxclkFrequency, &result);
 	smu10_data->gfx_min_freq_limit = result / 10 * 1000;
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxGfxclkFrequency);
-	result = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxGfxclkFrequency, &result);
 	smu10_data->gfx_max_freq_limit = result / 10 * 1000;
 
 	return 0;
@@ -588,116 +586,148 @@ static int smu10_dpm_force_dpm_level(struct pp_hwmgr *hwmgr,
 	case AMD_DPM_FORCED_LEVEL_PROFILE_PEAK:
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinGfxClk,
-						data->gfx_max_freq_limit/100);
+						data->gfx_max_freq_limit/100,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinFclkByFreq,
-						SMU10_UMD_PSTATE_PEAK_FCLK);
+						SMU10_UMD_PSTATE_PEAK_FCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinSocclkByFreq,
-						SMU10_UMD_PSTATE_PEAK_SOCCLK);
+						SMU10_UMD_PSTATE_PEAK_SOCCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinVcn,
-						SMU10_UMD_PSTATE_VCE);
+						SMU10_UMD_PSTATE_VCE,
+						NULL);
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxGfxClk,
-						data->gfx_max_freq_limit/100);
+						data->gfx_max_freq_limit/100,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxFclkByFreq,
-						SMU10_UMD_PSTATE_PEAK_FCLK);
+						SMU10_UMD_PSTATE_PEAK_FCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxSocclkByFreq,
-						SMU10_UMD_PSTATE_PEAK_SOCCLK);
+						SMU10_UMD_PSTATE_PEAK_SOCCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxVcn,
-						SMU10_UMD_PSTATE_VCE);
+						SMU10_UMD_PSTATE_VCE,
+						NULL);
 		break;
 	case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK:
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinGfxClk,
-						min_sclk);
+						min_sclk,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxGfxClk,
-						min_sclk);
+						min_sclk,
+						NULL);
 		break;
 	case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK:
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinFclkByFreq,
-						min_mclk);
+						min_mclk,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxFclkByFreq,
-						min_mclk);
+						min_mclk,
+						NULL);
 		break;
 	case AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD:
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinGfxClk,
-						SMU10_UMD_PSTATE_GFXCLK);
+						SMU10_UMD_PSTATE_GFXCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinFclkByFreq,
-						SMU10_UMD_PSTATE_FCLK);
+						SMU10_UMD_PSTATE_FCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinSocclkByFreq,
-						SMU10_UMD_PSTATE_SOCCLK);
+						SMU10_UMD_PSTATE_SOCCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinVcn,
-						SMU10_UMD_PSTATE_VCE);
+						SMU10_UMD_PSTATE_VCE,
+						NULL);
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxGfxClk,
-						SMU10_UMD_PSTATE_GFXCLK);
+						SMU10_UMD_PSTATE_GFXCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxFclkByFreq,
-						SMU10_UMD_PSTATE_FCLK);
+						SMU10_UMD_PSTATE_FCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxSocclkByFreq,
-						SMU10_UMD_PSTATE_SOCCLK);
+						SMU10_UMD_PSTATE_SOCCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxVcn,
-						SMU10_UMD_PSTATE_VCE);
+						SMU10_UMD_PSTATE_VCE,
+						NULL);
 		break;
 	case AMD_DPM_FORCED_LEVEL_AUTO:
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinGfxClk,
-						min_sclk);
+						min_sclk,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinFclkByFreq,
 						hwmgr->display_config->num_display > 3 ?
 						SMU10_UMD_PSTATE_PEAK_FCLK :
-						min_mclk);
+						min_mclk,
+						NULL);
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinSocclkByFreq,
-						SMU10_UMD_PSTATE_MIN_SOCCLK);
+						SMU10_UMD_PSTATE_MIN_SOCCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinVcn,
-						SMU10_UMD_PSTATE_MIN_VCE);
+						SMU10_UMD_PSTATE_MIN_VCE,
+						NULL);
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxGfxClk,
-						data->gfx_max_freq_limit/100);
+						data->gfx_max_freq_limit/100,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxFclkByFreq,
-						SMU10_UMD_PSTATE_PEAK_FCLK);
+						SMU10_UMD_PSTATE_PEAK_FCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxSocclkByFreq,
-						SMU10_UMD_PSTATE_PEAK_SOCCLK);
+						SMU10_UMD_PSTATE_PEAK_SOCCLK,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxVcn,
-						SMU10_UMD_PSTATE_VCE);
+						SMU10_UMD_PSTATE_VCE,
+						NULL);
 		break;
 	case AMD_DPM_FORCED_LEVEL_LOW:
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinGfxClk,
-						data->gfx_min_freq_limit/100);
+						data->gfx_min_freq_limit/100,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxGfxClk,
-						data->gfx_min_freq_limit/100);
+						data->gfx_min_freq_limit/100,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinFclkByFreq,
-						min_mclk);
+						min_mclk,
+						NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxFclkByFreq,
-						min_mclk);
+						min_mclk,
+						NULL);
 		break;
 	case AMD_DPM_FORCED_LEVEL_MANUAL:
 	case AMD_DPM_FORCED_LEVEL_PROFILE_EXIT:
@@ -849,13 +879,15 @@ static int smu10_force_clock_level(struct pp_hwmgr *hwmgr,
 						PPSMC_MSG_SetHardMinGfxClk,
 						low == 2 ? data->gfx_max_freq_limit/100 :
 						low == 1 ? SMU10_UMD_PSTATE_GFXCLK :
-						data->gfx_min_freq_limit/100);
+						data->gfx_min_freq_limit/100,
+						NULL);
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxGfxClk,
 						high == 0 ? data->gfx_min_freq_limit/100 :
 						high == 1 ? SMU10_UMD_PSTATE_GFXCLK :
-						data->gfx_max_freq_limit/100);
+						data->gfx_max_freq_limit/100,
+						NULL);
 		break;
 
 	case PP_MCLK:
@@ -864,11 +896,13 @@ static int smu10_force_clock_level(struct pp_hwmgr *hwmgr,
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetHardMinFclkByFreq,
-						mclk_table->entries[low].clk/100);
+						mclk_table->entries[low].clk/100,
+						NULL);
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMaxFclkByFreq,
-						mclk_table->entries[high].clk/100);
+						mclk_table->entries[high].clk/100,
+						NULL);
 		break;
 
 	case PP_PCIE:
@@ -888,8 +922,7 @@ static int smu10_print_clock_levels(struct pp_hwmgr *hwmgr,
 
 	switch (type) {
 	case PP_SCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetGfxclkFrequency);
-		now = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetGfxclkFrequency, &now);
 
 	/* driver only know min/max gfx_clk, Add level 1 for all other gfx clks */
 		if (now == data->gfx_max_freq_limit/100)
@@ -910,8 +943,7 @@ static int smu10_print_clock_levels(struct pp_hwmgr *hwmgr,
 					i == 2 ? "*" : "");
 		break;
 	case PP_MCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetFclkFrequency);
-		now = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetFclkFrequency, &now);
 
 		for (i = 0; i < mclk_table->count; i++)
 			size += sprintf(buf + size, "%d: %uMhz %s\n",
@@ -1122,15 +1154,13 @@ static int smu10_read_sensor(struct pp_hwmgr *hwmgr, int idx,
 
 	switch (idx) {
 	case AMDGPU_PP_SENSOR_GFX_SCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetGfxclkFrequency);
-		sclk = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetGfxclkFrequency, &sclk);
 			/* in units of 10KHZ */
 		*((uint32_t *)value) = sclk * 100;
 		*size = 4;
 		break;
 	case AMDGPU_PP_SENSOR_GFX_MCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetFclkFrequency);
-		mclk = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetFclkFrequency, &mclk);
 			/* in units of 10KHZ */
 		*((uint32_t *)value) = mclk * 100;
 		*size = 4;
@@ -1166,20 +1196,20 @@ static int smu10_set_watermarks_for_clocks_ranges(struct pp_hwmgr *hwmgr,
 static int smu10_smus_notify_pwe(struct pp_hwmgr *hwmgr)
 {
 
-	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SetRccPfcPmeRestoreRegister);
+	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SetRccPfcPmeRestoreRegister, NULL);
 }
 
 static int smu10_powergate_mmhub(struct pp_hwmgr *hwmgr)
 {
-	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PowerGateMmHub);
+	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PowerGateMmHub, NULL);
 }
 
 static int smu10_powergate_sdma(struct pp_hwmgr *hwmgr, bool gate)
 {
 	if (gate)
-		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PowerDownSdma);
+		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PowerDownSdma, NULL);
 	else
-		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PowerUpSdma);
+		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PowerUpSdma, NULL);
 }
 
 static void smu10_powergate_vcn(struct pp_hwmgr *hwmgr, bool bgate)
@@ -1191,11 +1221,11 @@ static void smu10_powergate_vcn(struct pp_hwmgr *hwmgr, bool bgate)
 						AMD_IP_BLOCK_TYPE_VCN,
 						AMD_PG_STATE_GATE);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_PowerDownVcn, 0);
+					PPSMC_MSG_PowerDownVcn, 0, NULL);
 		smu10_data->vcn_power_gated = true;
 	} else {
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-						PPSMC_MSG_PowerUpVcn, 0);
+						PPSMC_MSG_PowerUpVcn, 0, NULL);
 		amdgpu_device_ip_set_powergating_state(hwmgr->adev,
 						AMD_IP_BLOCK_TYPE_VCN,
 						AMD_PG_STATE_UNGATE);
@@ -1304,7 +1334,8 @@ static int smu10_set_power_profile_mode(struct pp_hwmgr *hwmgr, long *input, uin
 		hwmgr->gfxoff_state_changed_by_workload = true;
 	}
 	result = smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_ActiveProcessNotify,
-						1 << workload_type);
+						1 << workload_type,
+						NULL);
 	if (!result)
 		hwmgr->power_profile_mode = input[size];
 	if (workload_type && hwmgr->gfxoff_state_changed_by_workload) {
@@ -1319,7 +1350,8 @@ static int smu10_asic_reset(struct pp_hwmgr *hwmgr, enum SMU_ASIC_RESET_MODE mod
 {
 	return smum_send_msg_to_smc_with_parameter(hwmgr,
 						   PPSMC_MSG_DeviceDriverReset,
-						   mode);
+						   mode,
+						   NULL);
 }
 
 static const struct pp_hwmgr_func smu10_hwmgr_funcs = {
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_clockpowergating.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_clockpowergating.c
index 683b29a99366..f2bda3bcbbde 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_clockpowergating.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_clockpowergating.c
@@ -29,14 +29,16 @@ static int smu7_enable_disable_uvd_dpm(struct pp_hwmgr *hwmgr, bool enable)
 {
 	return smum_send_msg_to_smc(hwmgr, enable ?
 			PPSMC_MSG_UVDDPM_Enable :
-			PPSMC_MSG_UVDDPM_Disable);
+			PPSMC_MSG_UVDDPM_Disable,
+			NULL);
 }
 
 static int smu7_enable_disable_vce_dpm(struct pp_hwmgr *hwmgr, bool enable)
 {
 	return smum_send_msg_to_smc(hwmgr, enable ?
 			PPSMC_MSG_VCEDPM_Enable :
-			PPSMC_MSG_VCEDPM_Disable);
+			PPSMC_MSG_VCEDPM_Disable,
+			NULL);
 }
 
 static int smu7_update_uvd_dpm(struct pp_hwmgr *hwmgr, bool bgate)
@@ -57,7 +59,8 @@ int smu7_powerdown_uvd(struct pp_hwmgr *hwmgr)
 {
 	if (phm_cf_want_uvd_power_gating(hwmgr))
 		return smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_UVDPowerOFF);
+				PPSMC_MSG_UVDPowerOFF,
+				NULL);
 	return 0;
 }
 
@@ -67,10 +70,10 @@ static int smu7_powerup_uvd(struct pp_hwmgr *hwmgr)
 		if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
 				  PHM_PlatformCaps_UVDDynamicPowerGating)) {
 			return smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_UVDPowerON, 1);
+					PPSMC_MSG_UVDPowerON, 1, NULL);
 		} else {
 			return smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_UVDPowerON, 0);
+					PPSMC_MSG_UVDPowerON, 0, NULL);
 		}
 	}
 
@@ -81,7 +84,8 @@ static int smu7_powerdown_vce(struct pp_hwmgr *hwmgr)
 {
 	if (phm_cf_want_vce_power_gating(hwmgr))
 		return smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_VCEPowerOFF);
+				PPSMC_MSG_VCEPowerOFF,
+				NULL);
 	return 0;
 }
 
@@ -89,7 +93,8 @@ static int smu7_powerup_vce(struct pp_hwmgr *hwmgr)
 {
 	if (phm_cf_want_vce_power_gating(hwmgr))
 		return smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_VCEPowerON);
+				PPSMC_MSG_VCEPowerON,
+				NULL);
 	return 0;
 }
 
@@ -181,7 +186,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_GFX_CGCG_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			if (PP_STATE_SUPPORT_LS & *msg_id) {
@@ -191,7 +196,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_GFX_CGLS_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -204,7 +209,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_GFX_3DCG_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 
@@ -215,7 +220,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_GFX_3DLS_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -228,7 +233,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_GFX_RLC_LS_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -241,7 +246,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_GFX_CP_LS_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -255,7 +260,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 						CG_GFX_OTHERS_MGCG_MASK);
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -275,7 +280,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_BIF_MGCG_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			if  (PP_STATE_SUPPORT_LS & *msg_id) {
@@ -285,7 +290,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_BIF_MGLS_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -298,7 +303,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_MC_MGCG_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 
@@ -309,7 +314,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_MC_MGLS_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -322,7 +327,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_DRM_MGCG_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			if (PP_STATE_SUPPORT_LS & *msg_id) {
@@ -332,7 +337,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_DRM_MGLS_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -345,7 +350,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_HDP_MGCG_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 
@@ -356,7 +361,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_HDP_MGLS_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -369,7 +374,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_SDMA_MGCG_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 
@@ -380,7 +385,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_SDMA_MGLS_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -393,7 +398,7 @@ int smu7_update_clock_gatings(struct pp_hwmgr *hwmgr,
 				value = CG_SYS_ROM_MASK;
 
 				if (smum_send_msg_to_smc_with_parameter(
-						hwmgr, msg, value))
+						hwmgr, msg, value, NULL))
 					return -EINVAL;
 			}
 			break;
@@ -423,8 +428,10 @@ int smu7_powergate_gfx(struct pp_hwmgr *hwmgr, bool enable)
 	if (enable)
 		return smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_GFX_CU_PG_ENABLE,
-					adev->gfx.cu_info.number);
+					adev->gfx.cu_info.number,
+					NULL);
 	else
 		return smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_GFX_CU_PG_DISABLE);
+				PPSMC_MSG_GFX_CU_PG_DISABLE,
+				NULL);
 }
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
index 4795eb66b2b2..753cb2cf6b77 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
@@ -186,7 +186,7 @@ static int smu7_enable_smc_voltage_controller(struct pp_hwmgr *hwmgr)
 	}
 
 	if (hwmgr->feature_mask & PP_SMC_VOLTAGE_CONTROL_MASK)
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Voltage_Cntl_Enable);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Voltage_Cntl_Enable, NULL);
 
 	return 0;
 }
@@ -493,7 +493,7 @@ static int smu7_copy_and_switch_arb_sets(struct pp_hwmgr *hwmgr,
 
 static int smu7_reset_to_default(struct pp_hwmgr *hwmgr)
 {
-	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ResetToDefaults);
+	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ResetToDefaults, NULL);
 }
 
 /**
@@ -979,7 +979,8 @@ static int smu7_enable_vrhot_gpio_interrupt(struct pp_hwmgr *hwmgr)
 	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
 			PHM_PlatformCaps_RegulatorHot))
 		return smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_EnableVRHotGPIOInterrupt);
+				PPSMC_MSG_EnableVRHotGPIOInterrupt,
+				NULL);
 
 	return 0;
 }
@@ -996,7 +997,7 @@ static int smu7_enable_ulv(struct pp_hwmgr *hwmgr)
 	struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
 
 	if (data->ulv_supported)
-		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableULV);
+		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableULV, NULL);
 
 	return 0;
 }
@@ -1006,7 +1007,7 @@ static int smu7_disable_ulv(struct pp_hwmgr *hwmgr)
 	struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
 
 	if (data->ulv_supported)
-		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisableULV);
+		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisableULV, NULL);
 
 	return 0;
 }
@@ -1015,13 +1016,14 @@ static int smu7_enable_deep_sleep_master_switch(struct pp_hwmgr *hwmgr)
 {
 	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
 			PHM_PlatformCaps_SclkDeepSleep)) {
-		if (smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MASTER_DeepSleep_ON))
+		if (smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MASTER_DeepSleep_ON, NULL))
 			PP_ASSERT_WITH_CODE(false,
 					"Attempt to enable Master Deep Sleep switch failed!",
 					return -EINVAL);
 	} else {
 		if (smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_MASTER_DeepSleep_OFF)) {
+				PPSMC_MSG_MASTER_DeepSleep_OFF,
+				NULL)) {
 			PP_ASSERT_WITH_CODE(false,
 					"Attempt to disable Master Deep Sleep switch failed!",
 					return -EINVAL);
@@ -1036,7 +1038,8 @@ static int smu7_disable_deep_sleep_master_switch(struct pp_hwmgr *hwmgr)
 	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
 			PHM_PlatformCaps_SclkDeepSleep)) {
 		if (smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_MASTER_DeepSleep_OFF)) {
+				PPSMC_MSG_MASTER_DeepSleep_OFF,
+				NULL)) {
 			PP_ASSERT_WITH_CODE(false,
 					"Attempt to disable Master Deep Sleep switch failed!",
 					return -EINVAL);
@@ -1089,7 +1092,7 @@ static int smu7_enable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr)
 			smu7_disable_sclk_vce_handshake(hwmgr);
 
 		PP_ASSERT_WITH_CODE(
-		(0 == smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DPM_Enable)),
+		(0 == smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DPM_Enable, NULL)),
 		"Failed to enable SCLK DPM during DPM Start Function!",
 		return -EINVAL);
 	}
@@ -1101,7 +1104,8 @@ static int smu7_enable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(
 				(0 == smum_send_msg_to_smc(hwmgr,
-						PPSMC_MSG_MCLKDPM_Enable)),
+						PPSMC_MSG_MCLKDPM_Enable,
+						NULL)),
 				"Failed to enable MCLK DPM during DPM Start Function!",
 				return -EINVAL);
 
@@ -1172,7 +1176,8 @@ static int smu7_start_dpm(struct pp_hwmgr *hwmgr)
 	if (0 == data->pcie_dpm_key_disabled) {
 		PP_ASSERT_WITH_CODE(
 				(0 == smum_send_msg_to_smc(hwmgr,
-						PPSMC_MSG_PCIeDPM_Enable)),
+						PPSMC_MSG_PCIeDPM_Enable,
+						NULL)),
 				"Failed to enable pcie DPM during DPM Start Function!",
 				return -EINVAL);
 	}
@@ -1180,7 +1185,8 @@ static int smu7_start_dpm(struct pp_hwmgr *hwmgr)
 	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
 				PHM_PlatformCaps_Falcon_QuickTransition)) {
 		PP_ASSERT_WITH_CODE((0 == smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_EnableACDCGPIOInterrupt)),
+				PPSMC_MSG_EnableACDCGPIOInterrupt,
+				NULL)),
 				"Failed to enable AC DC GPIO Interrupt!",
 				);
 	}
@@ -1197,7 +1203,7 @@ static int smu7_disable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr)
 		PP_ASSERT_WITH_CODE(true == smum_is_dpm_running(hwmgr),
 				"Trying to disable SCLK DPM when DPM is disabled",
 				return 0);
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DPM_Disable);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DPM_Disable, NULL);
 	}
 
 	/* disable MCLK dpm */
@@ -1205,7 +1211,7 @@ static int smu7_disable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr)
 		PP_ASSERT_WITH_CODE(true == smum_is_dpm_running(hwmgr),
 				"Trying to disable MCLK DPM when DPM is disabled",
 				return 0);
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_Disable);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_Disable, NULL);
 	}
 
 	return 0;
@@ -1226,7 +1232,8 @@ static int smu7_stop_dpm(struct pp_hwmgr *hwmgr)
 	if (!data->pcie_dpm_key_disabled) {
 		PP_ASSERT_WITH_CODE(
 				(smum_send_msg_to_smc(hwmgr,
-						PPSMC_MSG_PCIeDPM_Disable) == 0),
+						PPSMC_MSG_PCIeDPM_Disable,
+						NULL) == 0),
 				"Failed to disable pcie DPM during DPM Stop Function!",
 				return -EINVAL);
 	}
@@ -1237,7 +1244,7 @@ static int smu7_stop_dpm(struct pp_hwmgr *hwmgr)
 			"Trying to disable voltage DPM when DPM is disabled",
 			return 0);
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Voltage_Cntl_Disable);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Voltage_Cntl_Disable, NULL);
 
 	return 0;
 }
@@ -1388,7 +1395,7 @@ static int smu7_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
 	PP_ASSERT_WITH_CODE((0 == tmp_result),
 			"Failed to enable VR hot GPIO interrupt!", result = tmp_result);
 
-	smum_send_msg_to_smc(hwmgr, (PPSMC_Msg)PPSMC_NoDisplay);
+	smum_send_msg_to_smc(hwmgr, (PPSMC_Msg)PPSMC_NoDisplay, NULL);
 
 	tmp_result = smu7_enable_sclk_control(hwmgr);
 	PP_ASSERT_WITH_CODE((0 == tmp_result),
@@ -1446,14 +1453,14 @@ static int smu7_avfs_control(struct pp_hwmgr *hwmgr, bool enable)
 		if (!PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device,
 				CGS_IND_REG__SMC, FEATURE_STATUS, AVS_ON)) {
 			PP_ASSERT_WITH_CODE(!smum_send_msg_to_smc(
-					hwmgr, PPSMC_MSG_EnableAvfs),
+					hwmgr, PPSMC_MSG_EnableAvfs, NULL),
 					"Failed to enable AVFS!",
 					return -EINVAL);
 		}
 	} else if (PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device,
 			CGS_IND_REG__SMC, FEATURE_STATUS, AVS_ON)) {
 		PP_ASSERT_WITH_CODE(!smum_send_msg_to_smc(
-				hwmgr, PPSMC_MSG_DisableAvfs),
+				hwmgr, PPSMC_MSG_DisableAvfs, NULL),
 				"Failed to disable AVFS!",
 				return -EINVAL);
 	}
@@ -2609,7 +2616,8 @@ static int smu7_force_dpm_highest(struct pp_hwmgr *hwmgr)
 
 			if (level)
 				smum_send_msg_to_smc_with_parameter(hwmgr,
-						PPSMC_MSG_PCIeDPM_ForceLevel, level);
+						PPSMC_MSG_PCIeDPM_ForceLevel, level,
+						NULL);
 		}
 	}
 
@@ -2623,7 +2631,8 @@ static int smu7_force_dpm_highest(struct pp_hwmgr *hwmgr)
 			if (level)
 				smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SCLKDPM_SetEnabledMask,
-						(1 << level));
+						(1 << level),
+						NULL);
 		}
 	}
 
@@ -2637,7 +2646,8 @@ static int smu7_force_dpm_highest(struct pp_hwmgr *hwmgr)
 			if (level)
 				smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_MCLKDPM_SetEnabledMask,
-						(1 << level));
+						(1 << level),
+						NULL);
 		}
 	}
 
@@ -2656,14 +2666,16 @@ static int smu7_upload_dpm_level_enable_mask(struct pp_hwmgr *hwmgr)
 		if (data->dpm_level_enable_mask.sclk_dpm_enable_mask)
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SCLKDPM_SetEnabledMask,
-					data->dpm_level_enable_mask.sclk_dpm_enable_mask);
+					data->dpm_level_enable_mask.sclk_dpm_enable_mask,
+					NULL);
 	}
 
 	if (!data->mclk_dpm_key_disabled) {
 		if (data->dpm_level_enable_mask.mclk_dpm_enable_mask)
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_MCLKDPM_SetEnabledMask,
-					data->dpm_level_enable_mask.mclk_dpm_enable_mask);
+					data->dpm_level_enable_mask.mclk_dpm_enable_mask,
+					NULL);
 	}
 
 	return 0;
@@ -2678,7 +2690,8 @@ static int smu7_unforce_dpm_levels(struct pp_hwmgr *hwmgr)
 
 	if (!data->pcie_dpm_key_disabled) {
 		smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_PCIeDPM_UnForceLevel);
+				PPSMC_MSG_PCIeDPM_UnForceLevel,
+				NULL);
 	}
 
 	return smu7_upload_dpm_level_enable_mask(hwmgr);
@@ -2696,7 +2709,8 @@ static int smu7_force_dpm_lowest(struct pp_hwmgr *hwmgr)
 							      data->dpm_level_enable_mask.sclk_dpm_enable_mask);
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 							    PPSMC_MSG_SCLKDPM_SetEnabledMask,
-							    (1 << level));
+							    (1 << level),
+							    NULL);
 
 	}
 
@@ -2706,7 +2720,8 @@ static int smu7_force_dpm_lowest(struct pp_hwmgr *hwmgr)
 							      data->dpm_level_enable_mask.mclk_dpm_enable_mask);
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 							    PPSMC_MSG_MCLKDPM_SetEnabledMask,
-							    (1 << level));
+							    (1 << level),
+							    NULL);
 		}
 	}
 
@@ -2716,7 +2731,8 @@ static int smu7_force_dpm_lowest(struct pp_hwmgr *hwmgr)
 							      data->dpm_level_enable_mask.pcie_dpm_enable_mask);
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 							    PPSMC_MSG_PCIeDPM_ForceLevel,
-							    (level));
+							    (level),
+							    NULL);
 		}
 	}
 
@@ -3495,21 +3511,20 @@ static int smu7_get_gpu_power(struct pp_hwmgr *hwmgr, u32 *query)
 	    (adev->asic_type != CHIP_BONAIRE) &&
 	    (adev->asic_type != CHIP_FIJI) &&
 	    (adev->asic_type != CHIP_TONGA)) {
-		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetCurrPkgPwr, 0);
-		tmp = cgs_read_register(hwmgr->device, mmSMC_MSG_ARG_0);
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetCurrPkgPwr, 0, &tmp);
 		*query = tmp;
 
 		if (tmp != 0)
 			return 0;
 	}
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PmStatusLogStart);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PmStatusLogStart, NULL);
 	cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC,
 							ixSMU_PM_STATUS_95, 0);
 
 	for (i = 0; i < 10; i++) {
 		msleep(500);
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PmStatusLogSample);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PmStatusLogSample, NULL);
 		tmp = cgs_read_ind_register(hwmgr->device,
 						CGS_IND_REG__SMC,
 						ixSMU_PM_STATUS_95);
@@ -3534,14 +3549,12 @@ static int smu7_read_sensor(struct pp_hwmgr *hwmgr, int idx,
 
 	switch (idx) {
 	case AMDGPU_PP_SENSOR_GFX_SCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_API_GetSclkFrequency);
-		sclk = cgs_read_register(hwmgr->device, mmSMC_MSG_ARG_0);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_API_GetSclkFrequency, &sclk);
 		*((uint32_t *)value) = sclk;
 		*size = 4;
 		return 0;
 	case AMDGPU_PP_SENSOR_GFX_MCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_API_GetMclkFrequency);
-		mclk = cgs_read_register(hwmgr->device, mmSMC_MSG_ARG_0);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_API_GetMclkFrequency, &mclk);
 		*((uint32_t *)value) = mclk;
 		*size = 4;
 		return 0;
@@ -3730,7 +3743,8 @@ static int smu7_freeze_sclk_mclk_dpm(struct pp_hwmgr *hwmgr)
 				"Trying to freeze SCLK DPM when DPM is disabled",
 				);
 		PP_ASSERT_WITH_CODE(0 == smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_SCLKDPM_FreezeLevel),
+				PPSMC_MSG_SCLKDPM_FreezeLevel,
+				NULL),
 				"Failed to freeze SCLK DPM during FreezeSclkMclkDPM Function!",
 				return -EINVAL);
 	}
@@ -3742,7 +3756,8 @@ static int smu7_freeze_sclk_mclk_dpm(struct pp_hwmgr *hwmgr)
 				"Trying to freeze MCLK DPM when DPM is disabled",
 				);
 		PP_ASSERT_WITH_CODE(0 == smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_MCLKDPM_FreezeLevel),
+				PPSMC_MSG_MCLKDPM_FreezeLevel,
+				NULL),
 				"Failed to freeze MCLK DPM during FreezeSclkMclkDPM Function!",
 				return -EINVAL);
 	}
@@ -3884,7 +3899,8 @@ static int smu7_unfreeze_sclk_mclk_dpm(struct pp_hwmgr *hwmgr)
 				"Trying to Unfreeze SCLK DPM when DPM is disabled",
 				);
 		PP_ASSERT_WITH_CODE(0 == smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_SCLKDPM_UnfreezeLevel),
+				PPSMC_MSG_SCLKDPM_UnfreezeLevel,
+				NULL),
 			"Failed to unfreeze SCLK DPM during UnFreezeSclkMclkDPM Function!",
 			return -EINVAL);
 	}
@@ -3896,7 +3912,8 @@ static int smu7_unfreeze_sclk_mclk_dpm(struct pp_hwmgr *hwmgr)
 				"Trying to Unfreeze MCLK DPM when DPM is disabled",
 				);
 		PP_ASSERT_WITH_CODE(0 == smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_MCLKDPM_UnfreezeLevel),
+				PPSMC_MSG_MCLKDPM_UnfreezeLevel,
+				NULL),
 		    "Failed to unfreeze MCLK DPM during UnFreezeSclkMclkDPM Function!",
 		    return -EINVAL);
 	}
@@ -3949,12 +3966,14 @@ static int smu7_notify_smc_display(struct pp_hwmgr *hwmgr)
 	if (hwmgr->feature_mask & PP_VBI_TIME_SUPPORT_MASK) {
 		if (hwmgr->chip_id == CHIP_VEGAM)
 			smum_send_msg_to_smc_with_parameter(hwmgr,
-					(PPSMC_Msg)PPSMC_MSG_SetVBITimeout_VEGAM, data->frame_time_x2);
+					(PPSMC_Msg)PPSMC_MSG_SetVBITimeout_VEGAM, data->frame_time_x2,
+					NULL);
 		else
 			smum_send_msg_to_smc_with_parameter(hwmgr,
-					(PPSMC_Msg)PPSMC_MSG_SetVBITimeout, data->frame_time_x2);
+					(PPSMC_Msg)PPSMC_MSG_SetVBITimeout, data->frame_time_x2,
+					NULL);
 	}
-	return (smum_send_msg_to_smc(hwmgr, (PPSMC_Msg)PPSMC_HasDisplay) == 0) ?  0 : -EINVAL;
+	return (smum_send_msg_to_smc(hwmgr, (PPSMC_Msg)PPSMC_HasDisplay, NULL) == 0) ?  0 : -EINVAL;
 }
 
 static int smu7_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *input)
@@ -4040,7 +4059,8 @@ static int smu7_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_f
 	advanceFanControlParameters.usMaxFanPWM = us_max_fan_pwm;
 
 	return smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm);
+			PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm,
+			NULL);
 }
 
 static int
@@ -4048,7 +4068,7 @@ smu7_notify_smc_display_change(struct pp_hwmgr *hwmgr, bool has_display)
 {
 	PPSMC_Msg msg = has_display ? (PPSMC_Msg)PPSMC_HasDisplay : (PPSMC_Msg)PPSMC_NoDisplay;
 
-	return (smum_send_msg_to_smc(hwmgr, msg) == 0) ?  0 : -1;
+	return (smum_send_msg_to_smc(hwmgr, msg, NULL) == 0) ?  0 : -1;
 }
 
 static int
@@ -4132,7 +4152,8 @@ static int smu7_set_max_fan_rpm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_f
 	advanceFanControlParameters.usMaxFanRPM = us_max_fan_rpm;
 
 	return smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_SetFanRpmMax, us_max_fan_rpm);
+			PPSMC_MSG_SetFanRpmMax, us_max_fan_rpm,
+			NULL);
 }
 
 static const struct amdgpu_irq_src_funcs smu7_irq_funcs = {
@@ -4262,14 +4283,14 @@ static int smu7_check_mc_firmware(struct pp_hwmgr *hwmgr)
 		if ((hwmgr->chip_id == CHIP_POLARIS10) ||
 		    (hwmgr->chip_id == CHIP_POLARIS11) ||
 		    (hwmgr->chip_id == CHIP_POLARIS12))
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableFFC);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableFFC, NULL);
 	} else {
 		data->mem_latency_high = 330;
 		data->mem_latency_low = 330;
 		if ((hwmgr->chip_id == CHIP_POLARIS10) ||
 		    (hwmgr->chip_id == CHIP_POLARIS11) ||
 		    (hwmgr->chip_id == CHIP_POLARIS12))
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisableFFC);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisableFFC, NULL);
 	}
 
 	return 0;
@@ -4413,13 +4434,15 @@ static int smu7_force_clock_level(struct pp_hwmgr *hwmgr,
 		if (!data->sclk_dpm_key_disabled)
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SCLKDPM_SetEnabledMask,
-					data->dpm_level_enable_mask.sclk_dpm_enable_mask & mask);
+					data->dpm_level_enable_mask.sclk_dpm_enable_mask & mask,
+					NULL);
 		break;
 	case PP_MCLK:
 		if (!data->mclk_dpm_key_disabled)
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_MCLKDPM_SetEnabledMask,
-					data->dpm_level_enable_mask.mclk_dpm_enable_mask & mask);
+					data->dpm_level_enable_mask.mclk_dpm_enable_mask & mask,
+					NULL);
 		break;
 	case PP_PCIE:
 	{
@@ -4427,11 +4450,13 @@ static int smu7_force_clock_level(struct pp_hwmgr *hwmgr,
 
 		if (!data->pcie_dpm_key_disabled) {
 			if (fls(tmp) != ffs(tmp))
-				smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PCIeDPM_UnForceLevel);
+				smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PCIeDPM_UnForceLevel,
+						NULL);
 			else
 				smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_PCIeDPM_ForceLevel,
-					fls(tmp) - 1);
+					fls(tmp) - 1,
+					NULL);
 		}
 		break;
 	}
@@ -4457,8 +4482,7 @@ static int smu7_print_clock_levels(struct pp_hwmgr *hwmgr,
 
 	switch (type) {
 	case PP_SCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_API_GetSclkFrequency);
-		clock = cgs_read_register(hwmgr->device, mmSMC_MSG_ARG_0);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_API_GetSclkFrequency, &clock);
 
 		for (i = 0; i < sclk_table->count; i++) {
 			if (clock > sclk_table->dpm_levels[i].value)
@@ -4473,8 +4497,7 @@ static int smu7_print_clock_levels(struct pp_hwmgr *hwmgr,
 					(i == now) ? "*" : "");
 		break;
 	case PP_MCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_API_GetMclkFrequency);
-		clock = cgs_read_register(hwmgr->device, mmSMC_MSG_ARG_0);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_API_GetMclkFrequency, &clock);
 
 		for (i = 0; i < mclk_table->count; i++) {
 			if (clock > mclk_table->dpm_levels[i].value)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c
index 58f5589aaf12..5d4971576111 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c
@@ -887,7 +887,10 @@ static int smu7_enable_didt(struct pp_hwmgr *hwmgr, const bool enable)
 	didt_block |= block_en << TCP_Enable_SHIFT;
 
 	if (enable)
-		result = smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_Didt_Block_Function, didt_block);
+		result = smum_send_msg_to_smc_with_parameter(hwmgr,
+						PPSMC_MSG_Didt_Block_Function,
+						didt_block,
+						NULL);
 
 	return result;
 }
@@ -1009,7 +1012,8 @@ int smu7_enable_didt_config(struct pp_hwmgr *hwmgr)
 
 		if (hwmgr->chip_id == CHIP_POLARIS11) {
 			result = smum_send_msg_to_smc(hwmgr,
-						(uint16_t)(PPSMC_MSG_EnableDpmDidt));
+						(uint16_t)(PPSMC_MSG_EnableDpmDidt),
+						NULL);
 			PP_ASSERT_WITH_CODE((0 == result),
 					"Failed to enable DPM DIDT.", goto error);
 		}
@@ -1042,7 +1046,8 @@ int smu7_disable_didt_config(struct pp_hwmgr *hwmgr)
 				goto error);
 		if (hwmgr->chip_id == CHIP_POLARIS11) {
 			result = smum_send_msg_to_smc(hwmgr,
-						(uint16_t)(PPSMC_MSG_DisableDpmDidt));
+						(uint16_t)(PPSMC_MSG_DisableDpmDidt),
+						NULL);
 			PP_ASSERT_WITH_CODE((0 == result),
 					"Failed to disable DPM DIDT.", goto error);
 		}
@@ -1063,7 +1068,8 @@ int smu7_enable_smc_cac(struct pp_hwmgr *hwmgr)
 	if (PP_CAP(PHM_PlatformCaps_CAC)) {
 		int smc_result;
 		smc_result = smum_send_msg_to_smc(hwmgr,
-				(uint16_t)(PPSMC_MSG_EnableCac));
+				(uint16_t)(PPSMC_MSG_EnableCac),
+				NULL);
 		PP_ASSERT_WITH_CODE((0 == smc_result),
 				"Failed to enable CAC in SMC.", result = -1);
 
@@ -1079,7 +1085,8 @@ int smu7_disable_smc_cac(struct pp_hwmgr *hwmgr)
 
 	if (PP_CAP(PHM_PlatformCaps_CAC) && data->cac_enabled) {
 		int smc_result = smum_send_msg_to_smc(hwmgr,
-				(uint16_t)(PPSMC_MSG_DisableCac));
+				(uint16_t)(PPSMC_MSG_DisableCac),
+				NULL);
 		PP_ASSERT_WITH_CODE((smc_result == 0),
 				"Failed to disable CAC in SMC.", result = -1);
 
@@ -1095,7 +1102,9 @@ int smu7_set_power_limit(struct pp_hwmgr *hwmgr, uint32_t n)
 	if (data->power_containment_features &
 			POWERCONTAINMENT_FEATURE_PkgPwrLimit)
 		return smum_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_PkgPwrSetLimit, n<<8);
+				PPSMC_MSG_PkgPwrSetLimit,
+				n<<8,
+				NULL);
 	return 0;
 }
 
@@ -1103,7 +1112,9 @@ static int smu7_set_overdriver_target_tdp(struct pp_hwmgr *hwmgr,
 						uint32_t target_tdp)
 {
 	return smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_OverDriveSetTargetTdp, target_tdp);
+			PPSMC_MSG_OverDriveSetTargetTdp,
+			target_tdp,
+			NULL);
 }
 
 int smu7_enable_power_containment(struct pp_hwmgr *hwmgr)
@@ -1124,7 +1135,8 @@ int smu7_enable_power_containment(struct pp_hwmgr *hwmgr)
 	if (PP_CAP(PHM_PlatformCaps_PowerContainment)) {
 		if (data->enable_tdc_limit_feature) {
 			smc_result = smum_send_msg_to_smc(hwmgr,
-					(uint16_t)(PPSMC_MSG_TDCLimitEnable));
+					(uint16_t)(PPSMC_MSG_TDCLimitEnable),
+					NULL);
 			PP_ASSERT_WITH_CODE((0 == smc_result),
 					"Failed to enable TDCLimit in SMC.", result = -1;);
 			if (0 == smc_result)
@@ -1134,7 +1146,8 @@ int smu7_enable_power_containment(struct pp_hwmgr *hwmgr)
 
 		if (data->enable_pkg_pwr_tracking_feature) {
 			smc_result = smum_send_msg_to_smc(hwmgr,
-					(uint16_t)(PPSMC_MSG_PkgPwrLimitEnable));
+					(uint16_t)(PPSMC_MSG_PkgPwrLimitEnable),
+					NULL);
 			PP_ASSERT_WITH_CODE((0 == smc_result),
 					"Failed to enable PkgPwrTracking in SMC.", result = -1;);
 			if (0 == smc_result) {
@@ -1163,7 +1176,8 @@ int smu7_disable_power_containment(struct pp_hwmgr *hwmgr)
 		if (data->power_containment_features &
 				POWERCONTAINMENT_FEATURE_TDCLimit) {
 			smc_result = smum_send_msg_to_smc(hwmgr,
-					(uint16_t)(PPSMC_MSG_TDCLimitDisable));
+					(uint16_t)(PPSMC_MSG_TDCLimitDisable),
+					NULL);
 			PP_ASSERT_WITH_CODE((smc_result == 0),
 					"Failed to disable TDCLimit in SMC.",
 					result = smc_result);
@@ -1172,7 +1186,8 @@ int smu7_disable_power_containment(struct pp_hwmgr *hwmgr)
 		if (data->power_containment_features &
 				POWERCONTAINMENT_FEATURE_DTE) {
 			smc_result = smum_send_msg_to_smc(hwmgr,
-					(uint16_t)(PPSMC_MSG_DisableDTE));
+					(uint16_t)(PPSMC_MSG_DisableDTE),
+					NULL);
 			PP_ASSERT_WITH_CODE((smc_result == 0),
 					"Failed to disable DTE in SMC.",
 					result = smc_result);
@@ -1181,7 +1196,8 @@ int smu7_disable_power_containment(struct pp_hwmgr *hwmgr)
 		if (data->power_containment_features &
 				POWERCONTAINMENT_FEATURE_PkgPwrLimit) {
 			smc_result = smum_send_msg_to_smc(hwmgr,
-					(uint16_t)(PPSMC_MSG_PkgPwrLimitDisable));
+					(uint16_t)(PPSMC_MSG_PkgPwrLimitDisable),
+					NULL);
 			PP_ASSERT_WITH_CODE((smc_result == 0),
 					"Failed to disable PkgPwrTracking in SMC.",
 					result = smc_result);
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c
index 5bdc0df5a9f4..0b30f73649a8 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c
@@ -151,8 +151,8 @@ int smu7_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
 	int result;
 
 	if (PP_CAP(PHM_PlatformCaps_ODFuzzyFanControlSupport)) {
-		cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_FUZZY);
-		result = smum_send_msg_to_smc(hwmgr, PPSMC_StartFanControl);
+		result = smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_StartFanControl,
+					FAN_CONTROL_FUZZY, NULL);
 
 		if (PP_CAP(PHM_PlatformCaps_FanSpeedInTableIsRPM))
 			hwmgr->hwmgr_func->set_max_fan_rpm_output(hwmgr,
@@ -164,8 +164,8 @@ int smu7_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
 					advanceFanControlParameters.usMaxFanPWM);
 
 	} else {
-		cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_TABLE);
-		result = smum_send_msg_to_smc(hwmgr, PPSMC_StartFanControl);
+		result = smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_StartFanControl,
+					FAN_CONTROL_TABLE, NULL);
 	}
 
 	if (!result && hwmgr->thermal_controller.
@@ -173,7 +173,8 @@ int smu7_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
 		result = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetFanTemperatureTarget,
 				hwmgr->thermal_controller.
-				advanceFanControlParameters.ucTargetTemperature);
+				advanceFanControlParameters.ucTargetTemperature,
+				NULL);
 	hwmgr->fan_ctrl_enabled = true;
 
 	return result;
@@ -183,7 +184,7 @@ int smu7_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
 int smu7_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
 {
 	hwmgr->fan_ctrl_enabled = false;
-	return smum_send_msg_to_smc(hwmgr, PPSMC_StopFanControl);
+	return smum_send_msg_to_smc(hwmgr, PPSMC_StopFanControl, NULL);
 }
 
 /**
@@ -372,7 +373,7 @@ static void smu7_thermal_enable_alert(struct pp_hwmgr *hwmgr)
 			CG_THERMAL_INT, THERM_INT_MASK, alert);
 
 	/* send message to SMU to enable internal thermal interrupts */
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Thermal_Cntl_Enable);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Thermal_Cntl_Enable, NULL);
 }
 
 /**
@@ -390,7 +391,7 @@ int smu7_thermal_disable_alert(struct pp_hwmgr *hwmgr)
 			CG_THERMAL_INT, THERM_INT_MASK, alert);
 
 	/* send message to SMU to disable internal thermal interrupts */
-	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Thermal_Cntl_Disable);
+	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_Thermal_Cntl_Disable, NULL);
 }
 
 /**
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c
index 019d6a206492..a6c6a793e98e 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c
@@ -162,8 +162,10 @@ static uint32_t smu8_get_max_sclk_level(struct pp_hwmgr *hwmgr)
 	struct smu8_hwmgr *data = hwmgr->backend;
 
 	if (data->max_sclk_level == 0) {
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxSclkLevel);
-		data->max_sclk_level = smum_get_argument(hwmgr) + 1;
+		smum_send_msg_to_smc(hwmgr,
+				PPSMC_MSG_GetMaxSclkLevel,
+				&data->max_sclk_level);
+		data->max_sclk_level += 1;
 	}
 
 	return data->max_sclk_level;
@@ -580,7 +582,8 @@ static int smu8_init_uvd_limit(struct pp_hwmgr *hwmgr)
 	struct smu8_hwmgr *data = hwmgr->backend;
 	struct phm_uvd_clock_voltage_dependency_table *table =
 				hwmgr->dyn_state.uvd_clock_voltage_dependency_table;
-	unsigned long clock = 0, level;
+	unsigned long clock = 0;
+	uint32_t level;
 
 	if (NULL == table || table->count <= 0)
 		return -EINVAL;
@@ -588,8 +591,7 @@ static int smu8_init_uvd_limit(struct pp_hwmgr *hwmgr)
 	data->uvd_dpm.soft_min_clk = 0;
 	data->uvd_dpm.hard_min_clk = 0;
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxUvdLevel);
-	level = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxUvdLevel, &level);
 
 	if (level < table->count)
 		clock = table->entries[level].vclk;
@@ -607,7 +609,8 @@ static int smu8_init_vce_limit(struct pp_hwmgr *hwmgr)
 	struct smu8_hwmgr *data = hwmgr->backend;
 	struct phm_vce_clock_voltage_dependency_table *table =
 				hwmgr->dyn_state.vce_clock_voltage_dependency_table;
-	unsigned long clock = 0, level;
+	unsigned long clock = 0;
+	uint32_t level;
 
 	if (NULL == table || table->count <= 0)
 		return -EINVAL;
@@ -615,8 +618,7 @@ static int smu8_init_vce_limit(struct pp_hwmgr *hwmgr)
 	data->vce_dpm.soft_min_clk = 0;
 	data->vce_dpm.hard_min_clk = 0;
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxEclkLevel);
-	level = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxEclkLevel, &level);
 
 	if (level < table->count)
 		clock = table->entries[level].ecclk;
@@ -634,7 +636,8 @@ static int smu8_init_acp_limit(struct pp_hwmgr *hwmgr)
 	struct smu8_hwmgr *data = hwmgr->backend;
 	struct phm_acp_clock_voltage_dependency_table *table =
 				hwmgr->dyn_state.acp_clock_voltage_dependency_table;
-	unsigned long clock = 0, level;
+	unsigned long clock = 0;
+	uint32_t level;
 
 	if (NULL == table || table->count <= 0)
 		return -EINVAL;
@@ -642,8 +645,7 @@ static int smu8_init_acp_limit(struct pp_hwmgr *hwmgr)
 	data->acp_dpm.soft_min_clk = 0;
 	data->acp_dpm.hard_min_clk = 0;
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxAclkLevel);
-	level = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxAclkLevel, &level);
 
 	if (level < table->count)
 		clock = table->entries[level].acpclk;
@@ -665,7 +667,7 @@ static void smu8_init_power_gate_state(struct pp_hwmgr *hwmgr)
 #ifdef CONFIG_DRM_AMD_ACP
 	data->acp_power_gated = false;
 #else
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ACPPowerOFF);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ACPPowerOFF, NULL);
 	data->acp_power_gated = true;
 #endif
 
@@ -708,7 +710,8 @@ static int smu8_update_sclk_limit(struct pp_hwmgr *hwmgr)
 						PPSMC_MSG_SetSclkHardMin,
 						 smu8_get_sclk_level(hwmgr,
 					data->sclk_dpm.hard_min_clk,
-					     PPSMC_MSG_SetSclkHardMin));
+					     PPSMC_MSG_SetSclkHardMin),
+						 NULL);
 	}
 
 	clock = data->sclk_dpm.soft_min_clk;
@@ -731,7 +734,8 @@ static int smu8_update_sclk_limit(struct pp_hwmgr *hwmgr)
 						PPSMC_MSG_SetSclkSoftMin,
 						smu8_get_sclk_level(hwmgr,
 					data->sclk_dpm.soft_min_clk,
-					     PPSMC_MSG_SetSclkSoftMin));
+					     PPSMC_MSG_SetSclkSoftMin),
+						NULL);
 	}
 
 	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
@@ -742,7 +746,8 @@ static int smu8_update_sclk_limit(struct pp_hwmgr *hwmgr)
 						PPSMC_MSG_SetSclkSoftMax,
 						smu8_get_sclk_level(hwmgr,
 					data->sclk_dpm.soft_max_clk,
-					PPSMC_MSG_SetSclkSoftMax));
+					PPSMC_MSG_SetSclkSoftMax),
+						NULL);
 	}
 
 	return 0;
@@ -760,7 +765,8 @@ static int smu8_set_deep_sleep_sclk_threshold(struct pp_hwmgr *hwmgr)
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetMinDeepSleepSclk,
-				clks);
+				clks,
+				NULL);
 	}
 
 	return 0;
@@ -773,7 +779,8 @@ static int smu8_set_watermark_threshold(struct pp_hwmgr *hwmgr)
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetWatermarkFrequency,
-					data->sclk_dpm.soft_max_clk);
+					data->sclk_dpm.soft_max_clk,
+					NULL);
 
 	return 0;
 }
@@ -788,13 +795,15 @@ static int smu8_nbdpm_pstate_enable_disable(struct pp_hwmgr *hwmgr, bool enable,
 
 			return smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_EnableLowMemoryPstate,
-						(lock ? 1 : 0));
+						(lock ? 1 : 0),
+						NULL);
 		} else {
 			PP_DBG_LOG("disable Low Memory PState.\n");
 
 			return smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_DisableLowMemoryPstate,
-						(lock ? 1 : 0));
+						(lock ? 1 : 0),
+						NULL);
 		}
 	}
 
@@ -814,7 +823,8 @@ static int smu8_disable_nb_dpm(struct pp_hwmgr *hwmgr)
 		ret = smum_send_msg_to_smc_with_parameter(
 							  hwmgr,
 							  PPSMC_MSG_DisableAllSmuFeatures,
-							  dpm_features);
+							  dpm_features,
+							  NULL);
 		if (ret == 0)
 			data->is_nb_dpm_enabled = false;
 	}
@@ -835,7 +845,8 @@ static int smu8_enable_nb_dpm(struct pp_hwmgr *hwmgr)
 		ret = smum_send_msg_to_smc_with_parameter(
 							  hwmgr,
 							  PPSMC_MSG_EnableAllSmuFeatures,
-							  dpm_features);
+							  dpm_features,
+							  NULL);
 		if (ret == 0)
 			data->is_nb_dpm_enabled = true;
 	}
@@ -953,7 +964,8 @@ static int smu8_start_dpm(struct pp_hwmgr *hwmgr)
 
 	return smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_EnableAllSmuFeatures,
-				SCLK_DPM_MASK);
+				SCLK_DPM_MASK,
+				NULL);
 }
 
 static int smu8_stop_dpm(struct pp_hwmgr *hwmgr)
@@ -967,7 +979,8 @@ static int smu8_stop_dpm(struct pp_hwmgr *hwmgr)
 		data->dpm_flags &= ~DPMFlags_SCLK_Enabled;
 		ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DisableAllSmuFeatures,
-					dpm_features);
+					dpm_features,
+					NULL);
 	}
 	return ret;
 }
@@ -983,13 +996,15 @@ static int smu8_program_bootup_state(struct pp_hwmgr *hwmgr)
 				PPSMC_MSG_SetSclkSoftMin,
 				smu8_get_sclk_level(hwmgr,
 				data->sclk_dpm.soft_min_clk,
-				PPSMC_MSG_SetSclkSoftMin));
+				PPSMC_MSG_SetSclkSoftMin),
+				NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSclkSoftMax,
 				smu8_get_sclk_level(hwmgr,
 				data->sclk_dpm.soft_max_clk,
-				PPSMC_MSG_SetSclkSoftMax));
+				PPSMC_MSG_SetSclkSoftMax),
+				NULL);
 
 	return 0;
 }
@@ -1127,13 +1142,15 @@ static int smu8_phm_force_dpm_highest(struct pp_hwmgr *hwmgr)
 					PPSMC_MSG_SetSclkSoftMin,
 					smu8_get_sclk_level(hwmgr,
 					data->sclk_dpm.soft_max_clk,
-					PPSMC_MSG_SetSclkSoftMin));
+					PPSMC_MSG_SetSclkSoftMin),
+					NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSclkSoftMax,
 				smu8_get_sclk_level(hwmgr,
 				data->sclk_dpm.soft_max_clk,
-				PPSMC_MSG_SetSclkSoftMax));
+				PPSMC_MSG_SetSclkSoftMax),
+				NULL);
 
 	return 0;
 }
@@ -1167,13 +1184,15 @@ static int smu8_phm_unforce_dpm_levels(struct pp_hwmgr *hwmgr)
 				PPSMC_MSG_SetSclkSoftMin,
 				smu8_get_sclk_level(hwmgr,
 				data->sclk_dpm.soft_min_clk,
-				PPSMC_MSG_SetSclkSoftMin));
+				PPSMC_MSG_SetSclkSoftMin),
+				NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSclkSoftMax,
 				smu8_get_sclk_level(hwmgr,
 				data->sclk_dpm.soft_max_clk,
-				PPSMC_MSG_SetSclkSoftMax));
+				PPSMC_MSG_SetSclkSoftMax),
+				NULL);
 
 	return 0;
 }
@@ -1186,13 +1205,15 @@ static int smu8_phm_force_dpm_lowest(struct pp_hwmgr *hwmgr)
 			PPSMC_MSG_SetSclkSoftMax,
 			smu8_get_sclk_level(hwmgr,
 			data->sclk_dpm.soft_min_clk,
-			PPSMC_MSG_SetSclkSoftMax));
+			PPSMC_MSG_SetSclkSoftMax),
+			NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSclkSoftMin,
 				smu8_get_sclk_level(hwmgr,
 				data->sclk_dpm.soft_min_clk,
-				PPSMC_MSG_SetSclkSoftMin));
+				PPSMC_MSG_SetSclkSoftMin),
+				NULL);
 
 	return 0;
 }
@@ -1227,7 +1248,7 @@ static int smu8_dpm_force_dpm_level(struct pp_hwmgr *hwmgr,
 static int smu8_dpm_powerdown_uvd(struct pp_hwmgr *hwmgr)
 {
 	if (PP_CAP(PHM_PlatformCaps_UVDPowerGating))
-		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_UVDPowerOFF);
+		return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_UVDPowerOFF, NULL);
 	return 0;
 }
 
@@ -1237,7 +1258,8 @@ static int smu8_dpm_powerup_uvd(struct pp_hwmgr *hwmgr)
 		return smum_send_msg_to_smc_with_parameter(
 			hwmgr,
 			PPSMC_MSG_UVDPowerON,
-			PP_CAP(PHM_PlatformCaps_UVDDynamicPowerGating) ? 1 : 0);
+			PP_CAP(PHM_PlatformCaps_UVDDynamicPowerGating) ? 1 : 0,
+			NULL);
 	}
 
 	return 0;
@@ -1259,15 +1281,20 @@ static int  smu8_dpm_update_vce_dpm(struct pp_hwmgr *hwmgr)
 			PPSMC_MSG_SetEclkHardMin,
 			smu8_get_eclk_level(hwmgr,
 				data->vce_dpm.hard_min_clk,
-				PPSMC_MSG_SetEclkHardMin));
+				PPSMC_MSG_SetEclkHardMin),
+			NULL);
 	} else {
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_SetEclkHardMin, 0);
+					PPSMC_MSG_SetEclkHardMin,
+					0,
+					NULL);
 		/* disable ECLK DPM 0. Otherwise VCE could hang if
 		 * switching SCLK from DPM 0 to 6/7 */
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_SetEclkSoftMin, 1);
+					PPSMC_MSG_SetEclkSoftMin,
+					1,
+					NULL);
 	}
 	return 0;
 }
@@ -1276,7 +1303,8 @@ static int smu8_dpm_powerdown_vce(struct pp_hwmgr *hwmgr)
 {
 	if (PP_CAP(PHM_PlatformCaps_VCEPowerGating))
 		return smum_send_msg_to_smc(hwmgr,
-						     PPSMC_MSG_VCEPowerOFF);
+					    PPSMC_MSG_VCEPowerOFF,
+					    NULL);
 	return 0;
 }
 
@@ -1284,7 +1312,8 @@ static int smu8_dpm_powerup_vce(struct pp_hwmgr *hwmgr)
 {
 	if (PP_CAP(PHM_PlatformCaps_VCEPowerGating))
 		return smum_send_msg_to_smc(hwmgr,
-						     PPSMC_MSG_VCEPowerON);
+					    PPSMC_MSG_VCEPowerON,
+					    NULL);
 	return 0;
 }
 
@@ -1435,7 +1464,8 @@ static void smu8_hw_print_display_cfg(
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetDisplaySizePowerParams,
-						data);
+						data,
+						NULL);
 	}
 
 	return 0;
@@ -1497,10 +1527,12 @@ static int smu8_force_clock_level(struct pp_hwmgr *hwmgr,
 	case PP_SCLK:
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSclkSoftMin,
-				mask);
+				mask,
+				NULL);
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSclkSoftMax,
-				mask);
+				mask,
+				NULL);
 		break;
 	default:
 		break;
@@ -1753,9 +1785,10 @@ static int smu8_read_sensor(struct pp_hwmgr *hwmgr, int idx,
 		*((uint32_t *)value) = 0;
 		return 0;
 	case AMDGPU_PP_SENSOR_GPU_LOAD:
-		result = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetAverageGraphicsActivity);
+		result = smum_send_msg_to_smc(hwmgr,
+				PPSMC_MSG_GetAverageGraphicsActivity,
+				&activity_percent);
 		if (0 == result) {
-			activity_percent = cgs_read_register(hwmgr->device, mmSMU_MP1_SRBM2P_ARG_0);
 			activity_percent = activity_percent > 100 ? 100 : activity_percent;
 		} else {
 			activity_percent = 50;
@@ -1785,20 +1818,25 @@ static int smu8_notify_cac_buffer_info(struct pp_hwmgr *hwmgr,
 {
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramAddrHiVirtual,
-					mc_addr_hi);
+					mc_addr_hi,
+					NULL);
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramAddrLoVirtual,
-					mc_addr_low);
+					mc_addr_low,
+					NULL);
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramAddrHiPhysical,
-					virtual_addr_hi);
+					virtual_addr_hi,
+					NULL);
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramAddrLoPhysical,
-					virtual_addr_low);
+					virtual_addr_low,
+					NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramBufferSize,
-					size);
+					size,
+					NULL);
 	return 0;
 }
 
@@ -1827,12 +1865,16 @@ static int smu8_enable_disable_uvd_dpm(struct pp_hwmgr *hwmgr, bool enable)
 		data->dpm_flags |= DPMFlags_UVD_Enabled;
 		dpm_features |= UVD_DPM_MASK;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-			    PPSMC_MSG_EnableAllSmuFeatures, dpm_features);
+			    PPSMC_MSG_EnableAllSmuFeatures,
+			    dpm_features,
+			    NULL);
 	} else {
 		dpm_features |= UVD_DPM_MASK;
 		data->dpm_flags &= ~DPMFlags_UVD_Enabled;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-			   PPSMC_MSG_DisableAllSmuFeatures, dpm_features);
+			   PPSMC_MSG_DisableAllSmuFeatures,
+			   dpm_features,
+			   NULL);
 	}
 	return 0;
 }
@@ -1854,7 +1896,8 @@ int smu8_dpm_update_uvd_dpm(struct pp_hwmgr *hwmgr, bool bgate)
 				PPSMC_MSG_SetUvdHardMin,
 				smu8_get_uvd_level(hwmgr,
 					data->uvd_dpm.hard_min_clk,
-					PPSMC_MSG_SetUvdHardMin));
+					PPSMC_MSG_SetUvdHardMin),
+				NULL);
 
 			smu8_enable_disable_uvd_dpm(hwmgr, true);
 		} else {
@@ -1878,12 +1921,16 @@ static int smu8_enable_disable_vce_dpm(struct pp_hwmgr *hwmgr, bool enable)
 		data->dpm_flags |= DPMFlags_VCE_Enabled;
 		dpm_features |= VCE_DPM_MASK;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-			    PPSMC_MSG_EnableAllSmuFeatures, dpm_features);
+			    PPSMC_MSG_EnableAllSmuFeatures,
+			    dpm_features,
+			    NULL);
 	} else {
 		dpm_features |= VCE_DPM_MASK;
 		data->dpm_flags &= ~DPMFlags_VCE_Enabled;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-			   PPSMC_MSG_DisableAllSmuFeatures, dpm_features);
+			   PPSMC_MSG_DisableAllSmuFeatures,
+			   dpm_features,
+			   NULL);
 	}
 
 	return 0;
@@ -1898,9 +1945,9 @@ static void smu8_dpm_powergate_acp(struct pp_hwmgr *hwmgr, bool bgate)
 		return;
 
 	if (bgate)
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ACPPowerOFF);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ACPPowerOFF, NULL);
 	else
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ACPPowerON);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ACPPowerON, NULL);
 }
 
 static void smu8_dpm_powergate_uvd(struct pp_hwmgr *hwmgr, bool bgate)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c
index d09690fca452..91b5d96db674 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c
@@ -557,7 +557,9 @@ void phm_apply_dal_min_voltage_request(struct pp_hwmgr *hwmgr)
 		if (req_vddc <= vddc_table->entries[i].vddc) {
 			req_volt = (((uint32_t)vddc_table->entries[i].vddc) * VOLTAGE_SCALE);
 			smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_VddC_Request, req_volt);
+					PPSMC_MSG_VddC_Request,
+					req_volt,
+					NULL);
 			return;
 		}
 	}
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_baco.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_baco.c
index d168af4a4d78..46bb16c29cf6 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_baco.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_baco.c
@@ -98,7 +98,7 @@ int vega10_baco_set_state(struct pp_hwmgr *hwmgr, enum BACO_STATE state)
 	if (state == BACO_STATE_IN) {
 		if (soc15_baco_program_registers(hwmgr, pre_baco_tbl,
 					     ARRAY_SIZE(pre_baco_tbl))) {
-			if (smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnterBaco))
+			if (smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnterBaco, NULL))
 				return -EINVAL;
 
 			if (soc15_baco_program_registers(hwmgr, enter_baco_tbl,
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
index f29f95be1e56..675c7cab7cfc 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
@@ -484,8 +484,9 @@ static void vega10_init_dpm_defaults(struct pp_hwmgr *hwmgr)
 	if (data->registry_data.vr0hot_enabled)
 		data->smu_features[GNLD_VR0HOT].supported = true;
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetSmuVersion);
-	hwmgr->smu_version = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr,
+			PPSMC_MSG_GetSmuVersion,
+			&hwmgr->smu_version);
 		/* ACG firmware has major version 5 */
 	if ((hwmgr->smu_version & 0xff000000) == 0x5000000)
 		data->smu_features[GNLD_ACG].supported = true;
@@ -503,10 +504,8 @@ static void vega10_init_dpm_defaults(struct pp_hwmgr *hwmgr)
 		data->smu_features[GNLD_PCC_LIMIT].supported = true;
 
 	/* Get the SN to turn into a Unique ID */
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumTop32);
-	top32 = smum_get_argument(hwmgr);
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumBottom32);
-	bottom32 = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumTop32, &top32);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumBottom32, &bottom32);
 
 	adev->unique_id = ((uint64_t)bottom32 << 32) | top32;
 }
@@ -993,7 +992,10 @@ static int vega10_setup_asic_task(struct pp_hwmgr *hwmgr)
 			"Failed to set up led dpm config!",
 			return -EINVAL);
 
-	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_NumOfDisplays, 0);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_NumOfDisplays,
+				0,
+				NULL);
 
 	return 0;
 }
@@ -2303,16 +2305,15 @@ static int vega10_acg_enable(struct pp_hwmgr *hwmgr)
 					data->smu_features[GNLD_DPM_PREFETCHER].smu_feature_bitmap))
 			data->smu_features[GNLD_DPM_PREFETCHER].enabled = true;
 
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_InitializeAcg);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_InitializeAcg, NULL);
 
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAcgBtc);
-		agc_btc_response = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAcgBtc, &agc_btc_response);
 
 		if (1 == agc_btc_response) {
 			if (1 == data->acg_loop_state)
-				smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAcgInClosedLoop);
+				smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAcgInClosedLoop, NULL);
 			else if (2 == data->acg_loop_state)
-				smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAcgInOpenLoop);
+				smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAcgInOpenLoop, NULL);
 			if (0 == vega10_enable_smc_features(hwmgr, true,
 				data->smu_features[GNLD_ACG].smu_feature_bitmap))
 					data->smu_features[GNLD_ACG].enabled = true;
@@ -2429,11 +2430,9 @@ static int vega10_populate_and_upload_avfs_fuse_override(struct pp_hwmgr *hwmgr)
 	struct vega10_hwmgr *data = hwmgr->backend;
 	AvfsFuseOverride_t *avfs_fuse_table = &(data->smc_state_table.avfs_fuse_override_table);
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumTop32);
-	top32 = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumTop32, &top32);
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumBottom32);
-	bottom32 = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumBottom32, &bottom32);
 
 	serial_number = ((uint64_t)bottom32 << 32) | top32;
 
@@ -2610,14 +2609,16 @@ static int vega10_init_smc_table(struct pp_hwmgr *hwmgr)
 		if (0 != boot_up_values.usVddc) {
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetFloorSocVoltage,
-						(boot_up_values.usVddc * 4));
+						(boot_up_values.usVddc * 4),
+						NULL);
 			data->vbios_boot_state.bsoc_vddc_lock = true;
 		} else {
 			data->vbios_boot_state.bsoc_vddc_lock = false;
 		}
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetMinDeepSleepDcefclk,
-			(uint32_t)(data->vbios_boot_state.dcef_clock / 100));
+			(uint32_t)(data->vbios_boot_state.dcef_clock / 100),
+				NULL);
 	}
 
 	result = vega10_populate_avfs_parameters(hwmgr);
@@ -2904,7 +2905,8 @@ static int vega10_start_dpm(struct pp_hwmgr *hwmgr, uint32_t bitmap)
 
 	if (data->vbios_boot_state.bsoc_vddc_lock) {
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-						PPSMC_MSG_SetFloorSocVoltage, 0);
+						PPSMC_MSG_SetFloorSocVoltage, 0,
+						NULL);
 		data->vbios_boot_state.bsoc_vddc_lock = false;
 	}
 
@@ -2947,7 +2949,8 @@ static int vega10_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
 		vega10_enable_disable_PCC_limit_feature(hwmgr, true);
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_ConfigureTelemetry, data->config_telemetry);
+			PPSMC_MSG_ConfigureTelemetry, data->config_telemetry,
+			NULL);
 
 		tmp_result = vega10_construct_voltage_tables(hwmgr);
 		PP_ASSERT_WITH_CODE(!tmp_result,
@@ -3528,7 +3531,8 @@ static int vega10_upload_dpm_bootup_level(struct pp_hwmgr *hwmgr)
 				data->dpm_table.gfx_table.dpm_state.soft_min_level) {
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSoftMinGfxclkByIndex,
-				data->smc_state_table.gfx_boot_level);
+				data->smc_state_table.gfx_boot_level,
+				NULL);
 
 			data->dpm_table.gfx_table.dpm_state.soft_min_level =
 					data->smc_state_table.gfx_boot_level;
@@ -3543,11 +3547,13 @@ static int vega10_upload_dpm_bootup_level(struct pp_hwmgr *hwmgr)
 				socclk_idx = vega10_get_soc_index_for_max_uclk(hwmgr);
 				smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMinSocclkByIndex,
-						socclk_idx);
+						socclk_idx,
+						NULL);
 			} else {
 				smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SetSoftMinUclkByIndex,
-						data->smc_state_table.mem_boot_level);
+						data->smc_state_table.mem_boot_level,
+						NULL);
 			}
 			data->dpm_table.mem_table.dpm_state.soft_min_level =
 					data->smc_state_table.mem_boot_level;
@@ -3562,7 +3568,8 @@ static int vega10_upload_dpm_bootup_level(struct pp_hwmgr *hwmgr)
 				data->dpm_table.soc_table.dpm_state.soft_min_level) {
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSoftMinSocclkByIndex,
-				data->smc_state_table.soc_boot_level);
+				data->smc_state_table.soc_boot_level,
+				NULL);
 			data->dpm_table.soc_table.dpm_state.soft_min_level =
 					data->smc_state_table.soc_boot_level;
 		}
@@ -3582,7 +3589,8 @@ static int vega10_upload_dpm_max_level(struct pp_hwmgr *hwmgr)
 			data->dpm_table.gfx_table.dpm_state.soft_max_level) {
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSoftMaxGfxclkByIndex,
-				data->smc_state_table.gfx_max_level);
+				data->smc_state_table.gfx_max_level,
+				NULL);
 			data->dpm_table.gfx_table.dpm_state.soft_max_level =
 					data->smc_state_table.gfx_max_level;
 		}
@@ -3593,7 +3601,8 @@ static int vega10_upload_dpm_max_level(struct pp_hwmgr *hwmgr)
 			data->dpm_table.mem_table.dpm_state.soft_max_level) {
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetSoftMaxUclkByIndex,
-					data->smc_state_table.mem_max_level);
+					data->smc_state_table.mem_max_level,
+					NULL);
 			data->dpm_table.mem_table.dpm_state.soft_max_level =
 					data->smc_state_table.mem_max_level;
 		}
@@ -3607,7 +3616,8 @@ static int vega10_upload_dpm_max_level(struct pp_hwmgr *hwmgr)
 			data->dpm_table.soc_table.dpm_state.soft_max_level) {
 			smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSoftMaxSocclkByIndex,
-				data->smc_state_table.soc_max_level);
+				data->smc_state_table.soc_max_level,
+				NULL);
 			data->dpm_table.soc_table.dpm_state.soft_max_level =
 					data->smc_state_table.soc_max_level;
 		}
@@ -3694,7 +3704,8 @@ static int vega10_update_sclk_threshold(struct pp_hwmgr *hwmgr)
 		/* This message will also enable SmcToHost Interrupt */
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetLowGfxclkInterruptThreshold,
-				(uint32_t)low_sclk_interrupt_threshold);
+				(uint32_t)low_sclk_interrupt_threshold,
+				NULL);
 	}
 
 	return 0;
@@ -3801,8 +3812,7 @@ static int vega10_get_gpu_power(struct pp_hwmgr *hwmgr,
 	if (!query)
 		return -EINVAL;
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrPkgPwr);
-	value = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrPkgPwr, &value);
 
 	/* SMC returning actual watts, keep consistent with legacy asics, low 8 bit as 8 fractional bits */
 	*query = value << 8;
@@ -3822,13 +3832,11 @@ static int vega10_read_sensor(struct pp_hwmgr *hwmgr, int idx,
 
 	switch (idx) {
 	case AMDGPU_PP_SENSOR_GFX_SCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetAverageGfxclkActualFrequency);
-		sclk_mhz = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetAverageGfxclkActualFrequency, &sclk_mhz);
 		*((uint32_t *)value) = sclk_mhz * 100;
 		break;
 	case AMDGPU_PP_SENSOR_GFX_MCLK:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentUclkIndex);
-		mclk_idx = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentUclkIndex, &mclk_idx);
 		if (mclk_idx < dpm_table->mem_table.count) {
 			*((uint32_t *)value) = dpm_table->mem_table.dpm_levels[mclk_idx].value;
 			*size = 4;
@@ -3837,8 +3845,8 @@ static int vega10_read_sensor(struct pp_hwmgr *hwmgr, int idx,
 		}
 		break;
 	case AMDGPU_PP_SENSOR_GPU_LOAD:
-		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetAverageGfxActivity, 0);
-		activity_percent = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetAverageGfxActivity, 0,
+						&activity_percent);
 		*((uint32_t *)value) = activity_percent > 100 ? 100 : activity_percent;
 		*size = 4;
 		break;
@@ -3847,14 +3855,14 @@ static int vega10_read_sensor(struct pp_hwmgr *hwmgr, int idx,
 		*size = 4;
 		break;
 	case AMDGPU_PP_SENSOR_HOTSPOT_TEMP:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetTemperatureHotspot);
-		*((uint32_t *)value) = smum_get_argument(hwmgr) *
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetTemperatureHotspot, (uint32_t *)value);
+		*((uint32_t *)value) = *((uint32_t *)value) *
 			PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
 		*size = 4;
 		break;
 	case AMDGPU_PP_SENSOR_MEM_TEMP:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetTemperatureHBM);
-		*((uint32_t *)value) = smum_get_argument(hwmgr) *
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetTemperatureHBM, (uint32_t *)value);
+		*((uint32_t *)value) = *((uint32_t *)value) *
 			PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
 		*size = 4;
 		break;
@@ -3893,7 +3901,8 @@ static void vega10_notify_smc_display_change(struct pp_hwmgr *hwmgr,
 {
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetUclkFastSwitch,
-			has_disp ? 1 : 0);
+			has_disp ? 1 : 0,
+			NULL);
 }
 
 int vega10_display_clock_voltage_request(struct pp_hwmgr *hwmgr,
@@ -3928,7 +3937,8 @@ int vega10_display_clock_voltage_request(struct pp_hwmgr *hwmgr,
 		clk_request = (clk_freq << 16) | clk_select;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_RequestDisplayClockByFreq,
-				clk_request);
+				clk_request,
+				NULL);
 	}
 
 	return result;
@@ -3990,7 +4000,8 @@ static int vega10_notify_smc_display_config_after_ps_adjustment(
 		if (!vega10_display_clock_voltage_request(hwmgr, &clock_req)) {
 			smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetMinDeepSleepDcefclk,
-					min_clocks.dcefClockInSR / 100);
+					min_clocks.dcefClockInSR / 100,
+					NULL);
 		} else {
 			pr_info("Attempt to set Hard Min for DCEFCLK Failed!");
 		}
@@ -4000,7 +4011,8 @@ static int vega10_notify_smc_display_config_after_ps_adjustment(
 
 	if (min_clocks.memoryClock != 0) {
 		idx = vega10_get_uclk_index(hwmgr, mclk_table, min_clocks.memoryClock);
-		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetSoftMinUclkByIndex, idx);
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetSoftMinUclkByIndex, idx,
+						NULL);
 		data->dpm_table.mem_table.dpm_state.soft_min_level= idx;
 	}
 
@@ -4541,8 +4553,7 @@ static int vega10_print_clock_levels(struct pp_hwmgr *hwmgr,
 		if (data->registry_data.sclk_dpm_key_disabled)
 			break;
 
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentGfxclkIndex);
-		now = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentGfxclkIndex, &now);
 
 		if (hwmgr->pp_one_vf &&
 		    (hwmgr->dpm_level == AMD_DPM_FORCED_LEVEL_PROFILE_PEAK))
@@ -4558,8 +4569,7 @@ static int vega10_print_clock_levels(struct pp_hwmgr *hwmgr,
 		if (data->registry_data.mclk_dpm_key_disabled)
 			break;
 
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentUclkIndex);
-		now = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentUclkIndex, &now);
 
 		for (i = 0; i < mclk_table->count; i++)
 			size += sprintf(buf + size, "%d: %uMhz %s\n",
@@ -4570,8 +4580,7 @@ static int vega10_print_clock_levels(struct pp_hwmgr *hwmgr,
 		if (data->registry_data.socclk_dpm_key_disabled)
 			break;
 
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentSocclkIndex);
-		now = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentSocclkIndex, &now);
 
 		for (i = 0; i < soc_table->count; i++)
 			size += sprintf(buf + size, "%d: %uMhz %s\n",
@@ -4583,8 +4592,7 @@ static int vega10_print_clock_levels(struct pp_hwmgr *hwmgr,
 			break;
 
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_GetClockFreqMHz, CLK_DCEFCLK);
-		now = smum_get_argument(hwmgr);
+				PPSMC_MSG_GetClockFreqMHz, CLK_DCEFCLK, &now);
 
 		for (i = 0; i < dcef_table->count; i++)
 			size += sprintf(buf + size, "%d: %uMhz %s\n",
@@ -4593,8 +4601,7 @@ static int vega10_print_clock_levels(struct pp_hwmgr *hwmgr,
 					"*" : "");
 		break;
 	case PP_PCIE:
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentLinkIndex);
-		now = smum_get_argument(hwmgr);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentLinkIndex, &now);
 
 		for (i = 0; i < pcie_table->count; i++)
 			size += sprintf(buf + size, "%d: %s %s\n", i,
@@ -4658,7 +4665,8 @@ static int vega10_display_configuration_changed_task(struct pp_hwmgr *hwmgr)
 
 	if (data->water_marks_bitmap & WaterMarksLoaded) {
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_NumOfDisplays, hwmgr->display_config->num_display);
+			PPSMC_MSG_NumOfDisplays, hwmgr->display_config->num_display,
+			NULL);
 	}
 
 	return result;
@@ -4924,21 +4932,26 @@ static int vega10_notify_cac_buffer_info(struct pp_hwmgr *hwmgr,
 {
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetSystemVirtualDramAddrHigh,
-					virtual_addr_hi);
+					virtual_addr_hi,
+					NULL);
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetSystemVirtualDramAddrLow,
-					virtual_addr_low);
+					virtual_addr_low,
+					NULL);
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramLogSetDramAddrHigh,
-					mc_addr_hi);
+					mc_addr_hi,
+					NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramLogSetDramAddrLow,
-					mc_addr_low);
+					mc_addr_low,
+					NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramLogSetDramSize,
-					size);
+					size,
+					NULL);
 	return 0;
 }
 
@@ -5040,12 +5053,14 @@ static int vega10_set_power_profile_mode(struct pp_hwmgr *hwmgr, long *input, ui
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetCustomGfxDpmParameters,
 					busy_set_point | FPS<<8 |
-					use_rlc_busy << 16 | min_active_level<<24);
+					use_rlc_busy << 16 | min_active_level<<24,
+					NULL);
 	}
 
 out:
 	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetWorkloadMask,
-						1 << power_profile_mode);
+						1 << power_profile_mode,
+						NULL);
 	hwmgr->power_profile_mode = power_profile_mode;
 
 	return 0;
@@ -5302,7 +5317,7 @@ static int vega10_set_mp1_state(struct pp_hwmgr *hwmgr,
 		return 0;
 	}
 
-	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr, msg)) == 0,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr, msg, NULL)) == 0,
 			    "[PrepareMp1] Failed!",
 			    return ret);
 
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c
index 0a677d4bc87b..9757d47dd6b8 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c
@@ -651,18 +651,6 @@ static const struct vega10_didt_config_reg   PSMSEEDCStallDelayConfig_Vega10[] =
 	{   0xFFFFFFFF  }  /* End of list */
 };
 
-static const struct vega10_didt_config_reg   PSMSEEDCThresholdConfig_Vega10[] =
-{
-/* ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- *      Offset                             Mask                                                 Shift                                                  Value
- * ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- */
-	/* SQ EDC THRESHOLD */
-	{   ixDIDT_SQ_EDC_THRESHOLD,           DIDT_SQ_EDC_THRESHOLD__EDC_THRESHOLD_MASK,           DIDT_SQ_EDC_THRESHOLD__EDC_THRESHOLD__SHIFT,            0x0000 },
-
-	{   0xFFFFFFFF  }  /* End of list */
-};
-
 static const struct vega10_didt_config_reg   PSMSEEDCCtrlResetConfig_Vega10[] =
 {
 /* ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
@@ -707,17 +695,6 @@ static const struct vega10_didt_config_reg   PSMSEEDCCtrlConfig_Vega10[] =
 	{   0xFFFFFFFF  }  /* End of list */
 };
 
-static const struct vega10_didt_config_reg   PSMGCEDCThresholdConfig_vega10[] =
-{
-/* ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- *      Offset                             Mask                                                 Shift                                                  Value
- * ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- */
-	{   mmGC_EDC_THRESHOLD,                GC_EDC_THRESHOLD__EDC_THRESHOLD_MASK,                GC_EDC_THRESHOLD__EDC_THRESHOLD__SHIFT,                 0x0000000 },
-
-	{   0xFFFFFFFF  }  /* End of list */
-};
-
 static const struct vega10_didt_config_reg   PSMGCEDCDroopCtrlConfig_vega10[] =
 {
 /* ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
@@ -925,7 +902,8 @@ static void vega10_didt_set_mask(struct pp_hwmgr *hwmgr, const bool enable)
 
 	/* For Vega10, SMC does not support any mask yet. */
 	if (enable)
-		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_ConfigureGfxDidt, didt_block_info);
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_ConfigureGfxDidt, didt_block_info,
+						NULL);
 
 }
 
@@ -1327,7 +1305,8 @@ int vega10_set_power_limit(struct pp_hwmgr *hwmgr, uint32_t n)
 
 	if (data->registry_data.enable_pkg_pwr_tracking_feature)
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_SetPptLimit, n);
+				PPSMC_MSG_SetPptLimit, n,
+				NULL);
 
 	return 0;
 }
@@ -1393,7 +1372,8 @@ static void vega10_set_overdrive_target_percentage(struct pp_hwmgr *hwmgr,
 		uint32_t adjust_percent)
 {
 	smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_OverDriveSetPercentage, adjust_percent);
+			PPSMC_MSG_OverDriveSetPercentage, adjust_percent,
+			NULL);
 }
 
 int vega10_power_control_set_level(struct pp_hwmgr *hwmgr)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c
index ba8763daa380..7783c7fd7ccb 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c
@@ -31,8 +31,7 @@
 
 static int vega10_get_current_rpm(struct pp_hwmgr *hwmgr, uint32_t *current_rpm)
 {
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentRpm);
-	*current_rpm = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentRpm, current_rpm);
 	return 0;
 }
 
@@ -520,7 +519,8 @@ int vega10_thermal_setup_fan_table(struct pp_hwmgr *hwmgr)
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetFanTemperatureTarget,
-				(uint32_t)table->FanTargetTemperature);
+				(uint32_t)table->FanTargetTemperature,
+				NULL);
 
 	table->FanPwmMin = hwmgr->thermal_controller.
 			advanceFanControlParameters.usPWMMin * 255 / 100;
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_baco.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_baco.c
index 9d8ca94a8f0c..bc53cce4f32d 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_baco.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_baco.c
@@ -96,7 +96,7 @@ int vega12_baco_set_state(struct pp_hwmgr *hwmgr, enum BACO_STATE state)
 	if (state == BACO_STATE_IN) {
 		if (soc15_baco_program_registers(hwmgr, pre_baco_tbl,
 					     ARRAY_SIZE(pre_baco_tbl))) {
-			if (smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_EnterBaco, 0))
+			if (smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_EnterBaco, 0, NULL))
 				return -EINVAL;
 
 			if (soc15_baco_program_registers(hwmgr, enter_baco_tbl,
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c
index aca61d1ff3c2..f4d1692cccf3 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c
@@ -357,10 +357,8 @@ static void vega12_init_dpm_defaults(struct pp_hwmgr *hwmgr)
 	}
 
 	/* Get the SN to turn into a Unique ID */
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumTop32);
-	top32 = smum_get_argument(hwmgr);
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumBottom32);
-	bottom32 = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumTop32, &top32);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumBottom32, &bottom32);
 
 	adev->unique_id = ((uint64_t)bottom32 << 32) | top32;
 }
@@ -483,16 +481,12 @@ static int vega12_get_number_of_dpm_level(struct pp_hwmgr *hwmgr,
 
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_GetDpmFreqByIndex,
-			(clk_id << 16 | 0xFF));
+			(clk_id << 16 | 0xFF),
+			num_of_levels);
 	PP_ASSERT_WITH_CODE(!ret,
 			"[GetNumOfDpmLevel] failed to get dpm levels!",
 			return ret);
 
-	*num_of_levels = smum_get_argument(hwmgr);
-	PP_ASSERT_WITH_CODE(*num_of_levels > 0,
-			"[GetNumOfDpmLevel] number of clk levels is invalid!",
-			return -EINVAL);
-
 	return ret;
 }
 
@@ -504,12 +498,11 @@ static int vega12_get_dpm_frequency_by_index(struct pp_hwmgr *hwmgr,
 	 *Lower 16 bits specify the level
 	 */
 	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
-		PPSMC_MSG_GetDpmFreqByIndex, (clkID << 16 | index)) == 0,
+		PPSMC_MSG_GetDpmFreqByIndex, (clkID << 16 | index),
+		clock) == 0,
 		"[GetDpmFrequencyByIndex] Failed to get dpm frequency from SMU!",
 		return -EINVAL);
 
-	*clock = smum_get_argument(hwmgr);
-
 	return 0;
 }
 
@@ -749,7 +742,8 @@ static int vega12_init_smc_table(struct pp_hwmgr *hwmgr)
 		data->vbios_boot_state.vclock = boot_up_values.ulVClk;
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetMinDeepSleepDcefclk,
-			(uint32_t)(data->vbios_boot_state.dcef_clock / 100));
+			(uint32_t)(data->vbios_boot_state.dcef_clock / 100),
+				NULL);
 	}
 
 	memcpy(pp_table, pptable_information->smc_pptable, sizeof(PPTable_t));
@@ -767,11 +761,10 @@ static int vega12_run_acg_btc(struct pp_hwmgr *hwmgr)
 	uint32_t result;
 
 	PP_ASSERT_WITH_CODE(
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAcgBtc) == 0,
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAcgBtc, &result) == 0,
 		"[Run_ACG_BTC] Attempt to run ACG BTC failed!",
 		return -EINVAL);
 
-	result = smum_get_argument(hwmgr);
 	PP_ASSERT_WITH_CODE(result == 1,
 			"Failed to run ACG BTC!", return -EINVAL);
 
@@ -792,12 +785,14 @@ static int vega12_set_allowed_featuresmask(struct pp_hwmgr *hwmgr)
 				(allowed_features_low |= ((data->smu_features[i].smu_feature_bitmap >> SMU_FEATURES_LOW_SHIFT) & 0xFFFFFFFF));
 
 	PP_ASSERT_WITH_CODE(
-		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetAllowedFeaturesMaskHigh, allowed_features_high) == 0,
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetAllowedFeaturesMaskHigh, allowed_features_high,
+			NULL) == 0,
 		"[SetAllowedFeaturesMask] Attempt to set allowed features mask (high) failed!",
 		return -1);
 
 	PP_ASSERT_WITH_CODE(
-		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetAllowedFeaturesMaskLow, allowed_features_low) == 0,
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetAllowedFeaturesMaskLow, allowed_features_low,
+			NULL) == 0,
 		"[SetAllowedFeaturesMask] Attempt to set allowed features mask (low) failed!",
 		return -1);
 
@@ -828,7 +823,7 @@ static int vega12_enable_all_smu_features(struct pp_hwmgr *hwmgr)
 	bool enabled;
 
 	PP_ASSERT_WITH_CODE(
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableAllSmuFeatures) == 0,
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableAllSmuFeatures, NULL) == 0,
 		"[EnableAllSMUFeatures] Failed to enable all smu features!",
 		return -1);
 
@@ -854,7 +849,7 @@ static int vega12_disable_all_smu_features(struct pp_hwmgr *hwmgr)
 	bool enabled;
 
 	PP_ASSERT_WITH_CODE(
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisableAllSmuFeatures) == 0,
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisableAllSmuFeatures, NULL) == 0,
 		"[DisableAllSMUFeatures] Failed to disable all smu features!",
 		return -1);
 
@@ -879,7 +874,8 @@ static int vega12_set_overdrive_target_percentage(struct pp_hwmgr *hwmgr,
 		uint32_t adjust_percent)
 {
 	return smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_OverDriveSetPercentage, adjust_percent);
+			PPSMC_MSG_OverDriveSetPercentage, adjust_percent,
+			NULL);
 }
 
 static int vega12_power_control_set_level(struct pp_hwmgr *hwmgr)
@@ -902,24 +898,24 @@ static int vega12_get_all_clock_ranges_helper(struct pp_hwmgr *hwmgr,
 {
 	/* AC Max */
 	PP_ASSERT_WITH_CODE(
-		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetMaxDpmFreq, (clkid << 16)) == 0,
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetMaxDpmFreq, (clkid << 16),
+			&(clock->ACMax)) == 0,
 		"[GetClockRanges] Failed to get max ac clock from SMC!",
 		return -EINVAL);
-	clock->ACMax = smum_get_argument(hwmgr);
 
 	/* AC Min */
 	PP_ASSERT_WITH_CODE(
-		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetMinDpmFreq, (clkid << 16)) == 0,
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetMinDpmFreq, (clkid << 16),
+			&(clock->ACMin)) == 0,
 		"[GetClockRanges] Failed to get min ac clock from SMC!",
 		return -EINVAL);
-	clock->ACMin = smum_get_argument(hwmgr);
 
 	/* DC Max */
 	PP_ASSERT_WITH_CODE(
-		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetDcModeMaxDpmFreq, (clkid << 16)) == 0,
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetDcModeMaxDpmFreq, (clkid << 16),
+			&(clock->DCMax)) == 0,
 		"[GetClockRanges] Failed to get max dc clock from SMC!",
 		return -EINVAL);
-	clock->DCMax = smum_get_argument(hwmgr);
 
 	return 0;
 }
@@ -944,7 +940,7 @@ static int vega12_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
 	int tmp_result, result = 0;
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_NumOfDisplays, 0);
+			PPSMC_MSG_NumOfDisplays, 0, NULL);
 
 	result = vega12_set_allowed_featuresmask(hwmgr);
 	PP_ASSERT_WITH_CODE(result == 0,
@@ -1043,7 +1039,8 @@ static int vega12_upload_dpm_min_level(struct pp_hwmgr *hwmgr)
 		min_freq = data->dpm_table.gfx_table.dpm_state.soft_min_level;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_GFXCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_GFXCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min gfxclk !",
 					return ret);
 	}
@@ -1052,14 +1049,16 @@ static int vega12_upload_dpm_min_level(struct pp_hwmgr *hwmgr)
 		min_freq = data->dpm_table.mem_table.dpm_state.soft_min_level;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_UCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_UCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min memclk !",
 					return ret);
 
 		min_freq = data->dpm_table.mem_table.dpm_state.hard_min_level;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetHardMinByFreq,
-					(PPCLK_UCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_UCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set hard min memclk !",
 					return ret);
 	}
@@ -1069,7 +1068,8 @@ static int vega12_upload_dpm_min_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_VCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_VCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min vclk!",
 					return ret);
 
@@ -1077,7 +1077,8 @@ static int vega12_upload_dpm_min_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_DCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_DCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min dclk!",
 					return ret);
 	}
@@ -1087,7 +1088,8 @@ static int vega12_upload_dpm_min_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_ECLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_ECLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min eclk!",
 					return ret);
 	}
@@ -1097,7 +1099,8 @@ static int vega12_upload_dpm_min_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_SOCCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_SOCCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min socclk!",
 					return ret);
 	}
@@ -1107,7 +1110,8 @@ static int vega12_upload_dpm_min_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetHardMinByFreq,
-					(PPCLK_DCEFCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_DCEFCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set hard min dcefclk!",
 					return ret);
 	}
@@ -1127,7 +1131,8 @@ static int vega12_upload_dpm_max_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_GFXCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_GFXCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max gfxclk!",
 					return ret);
 	}
@@ -1137,7 +1142,8 @@ static int vega12_upload_dpm_max_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_UCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_UCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max memclk!",
 					return ret);
 	}
@@ -1147,14 +1153,16 @@ static int vega12_upload_dpm_max_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_VCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_VCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max vclk!",
 					return ret);
 
 		max_freq = data->dpm_table.dclk_table.dpm_state.soft_max_level;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_DCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_DCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max dclk!",
 					return ret);
 	}
@@ -1164,7 +1172,8 @@ static int vega12_upload_dpm_max_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_ECLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_ECLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max eclk!",
 					return ret);
 	}
@@ -1174,7 +1183,8 @@ static int vega12_upload_dpm_max_level(struct pp_hwmgr *hwmgr)
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_SOCCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_SOCCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max socclk!",
 					return ret);
 	}
@@ -1287,10 +1297,10 @@ static int vega12_get_current_gfx_clk_freq(struct pp_hwmgr *hwmgr, uint32_t *gfx
 	*gfx_freq = 0;
 
 	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_GetDpmClockFreq, (PPCLK_GFXCLK << 16)) == 0,
+			PPSMC_MSG_GetDpmClockFreq, (PPCLK_GFXCLK << 16),
+			&gfx_clk) == 0,
 			"[GetCurrentGfxClkFreq] Attempt to get Current GFXCLK Frequency Failed!",
 			return -EINVAL);
-	gfx_clk = smum_get_argument(hwmgr);
 
 	*gfx_freq = gfx_clk * 100;
 
@@ -1304,10 +1314,10 @@ static int vega12_get_current_mclk_freq(struct pp_hwmgr *hwmgr, uint32_t *mclk_f
 	*mclk_freq = 0;
 
 	PP_ASSERT_WITH_CODE(
-			smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetDpmClockFreq, (PPCLK_UCLK << 16)) == 0,
+			smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetDpmClockFreq, (PPCLK_UCLK << 16),
+				&mem_clk) == 0,
 			"[GetCurrentMClkFreq] Attempt to get Current MCLK Frequency Failed!",
 			return -EINVAL);
-	mem_clk = smum_get_argument(hwmgr);
 
 	*mclk_freq = mem_clk * 100;
 
@@ -1420,7 +1430,8 @@ static int vega12_notify_smc_display_change(struct pp_hwmgr *hwmgr,
 	if (data->smu_features[GNLD_DPM_UCLK].enabled)
 		return smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetUclkFastSwitch,
-			has_disp ? 1 : 0);
+			has_disp ? 1 : 0,
+			NULL);
 
 	return 0;
 }
@@ -1459,7 +1470,8 @@ int vega12_display_clock_voltage_request(struct pp_hwmgr *hwmgr,
 			clk_request = (clk_select << 16) | clk_freq;
 			result = smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetHardMinByFreq,
-					clk_request);
+					clk_request,
+					NULL);
 		}
 	}
 
@@ -1493,7 +1505,8 @@ static int vega12_notify_smc_display_config_after_ps_adjustment(
 				PP_ASSERT_WITH_CODE(
 					!smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetMinDeepSleepDcefclk,
-					min_clocks.dcefClockInSR /100),
+					min_clocks.dcefClockInSR /100,
+					NULL),
 					"Attempt to set divider for DCEFCLK Failed!",
 					return -1);
 		} else {
@@ -2124,10 +2137,10 @@ static int vega12_print_clock_levels(struct pp_hwmgr *hwmgr,
 	case PP_SOCCLK:
 		PP_ASSERT_WITH_CODE(
 				smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_GetDpmClockFreq, (PPCLK_SOCCLK << 16)) == 0,
+					PPSMC_MSG_GetDpmClockFreq, (PPCLK_SOCCLK << 16),
+					&now) == 0,
 				"Attempt to get Current SOCCLK Frequency Failed!",
 				return -EINVAL);
-		now = smum_get_argument(hwmgr);
 
 		PP_ASSERT_WITH_CODE(
 				vega12_get_socclocks(hwmgr, &clocks) == 0,
@@ -2142,10 +2155,10 @@ static int vega12_print_clock_levels(struct pp_hwmgr *hwmgr,
 	case PP_DCEFCLK:
 		PP_ASSERT_WITH_CODE(
 				smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_GetDpmClockFreq, (PPCLK_DCEFCLK << 16)) == 0,
+					PPSMC_MSG_GetDpmClockFreq, (PPCLK_DCEFCLK << 16),
+					&now) == 0,
 				"Attempt to get Current DCEFCLK Frequency Failed!",
 				return -EINVAL);
-		now = smum_get_argument(hwmgr);
 
 		PP_ASSERT_WITH_CODE(
 				vega12_get_dcefclocks(hwmgr, &clocks) == 0,
@@ -2343,7 +2356,8 @@ static int vega12_set_uclk_to_highest_dpm_level(struct pp_hwmgr *hwmgr,
 		dpm_table->dpm_state.hard_min_level = dpm_table->dpm_levels[dpm_table->count - 1].value;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetHardMinByFreq,
-				(PPCLK_UCLK << 16 ) | dpm_table->dpm_state.hard_min_level)),
+				(PPCLK_UCLK << 16 ) | dpm_table->dpm_state.hard_min_level,
+				NULL)),
 				"[SetUclkToHightestDpmLevel] Set hard min uclk failed!",
 				return ret);
 	}
@@ -2357,7 +2371,8 @@ static int vega12_pre_display_configuration_changed_task(struct pp_hwmgr *hwmgr)
 	int ret = 0;
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_NumOfDisplays, 0);
+			PPSMC_MSG_NumOfDisplays, 0,
+			NULL);
 
 	ret = vega12_set_uclk_to_highest_dpm_level(hwmgr,
 			&data->dpm_table.mem_table);
@@ -2383,7 +2398,8 @@ static int vega12_display_configuration_changed_task(struct pp_hwmgr *hwmgr)
 		data->smu_features[GNLD_DPM_DCEFCLK].supported &&
 		data->smu_features[GNLD_DPM_SOCCLK].supported)
 		smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_NumOfDisplays, hwmgr->display_config->num_display);
+			PPSMC_MSG_NumOfDisplays, hwmgr->display_config->num_display,
+			NULL);
 
 	return result;
 }
@@ -2555,21 +2571,26 @@ static int vega12_notify_cac_buffer_info(struct pp_hwmgr *hwmgr,
 {
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetSystemVirtualDramAddrHigh,
-					virtual_addr_hi);
+					virtual_addr_hi,
+					NULL);
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetSystemVirtualDramAddrLow,
-					virtual_addr_low);
+					virtual_addr_low,
+					NULL);
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramLogSetDramAddrHigh,
-					mc_addr_hi);
+					mc_addr_hi,
+					NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramLogSetDramAddrLow,
-					mc_addr_low);
+					mc_addr_low,
+					NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramLogSetDramSize,
-					size);
+					size,
+					NULL);
 	return 0;
 }
 
@@ -2605,7 +2626,7 @@ static int vega12_enable_gfx_off(struct pp_hwmgr *hwmgr)
 	int ret = 0;
 
 	if (data->gfxoff_controlled_by_driver)
-		ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_AllowGfxOff);
+		ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_AllowGfxOff, NULL);
 
 	return ret;
 }
@@ -2617,7 +2638,7 @@ static int vega12_disable_gfx_off(struct pp_hwmgr *hwmgr)
 	int ret = 0;
 
 	if (data->gfxoff_controlled_by_driver)
-		ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisallowGfxOff);
+		ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisallowGfxOff, NULL);
 
 	return ret;
 }
@@ -2654,7 +2675,7 @@ static int vega12_set_mp1_state(struct pp_hwmgr *hwmgr,
 		return 0;
 	}
 
-	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr, msg)) == 0,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr, msg, NULL)) == 0,
 			    "[PrepareMp1] Failed!",
 			    return ret);
 
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_thermal.c
index 904eb2c9155b..c85806a6f62e 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_thermal.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_thermal.c
@@ -32,10 +32,10 @@
 static int vega12_get_current_rpm(struct pp_hwmgr *hwmgr, uint32_t *current_rpm)
 {
 	PP_ASSERT_WITH_CODE(!smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_GetCurrentRpm),
+				PPSMC_MSG_GetCurrentRpm,
+				current_rpm),
 			"Attempt to get current RPM from SMC Failed!",
 			return -EINVAL);
-	*current_rpm = smum_get_argument(hwmgr);
 
 	return 0;
 }
@@ -259,7 +259,8 @@ int vega12_thermal_setup_fan_table(struct pp_hwmgr *hwmgr)
 
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetFanTemperatureTarget,
-				(uint32_t)table->FanTargetTemperature);
+				(uint32_t)table->FanTargetTemperature,
+				NULL);
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_baco.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_baco.c
index 9b5e72bdceca..2a28c9df15a0 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_baco.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_baco.c
@@ -91,16 +91,16 @@ int vega20_baco_set_state(struct pp_hwmgr *hwmgr, enum BACO_STATE state)
 			WREG32_SOC15(THM, 0, mmTHM_BACO_CNTL, data);
 
 			if(smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_EnterBaco, 0))
+					PPSMC_MSG_EnterBaco, 0, NULL))
 				return -EINVAL;
 		} else {
 			if(smum_send_msg_to_smc_with_parameter(hwmgr,
-					PPSMC_MSG_EnterBaco, 1))
+					PPSMC_MSG_EnterBaco, 1, NULL))
 				return -EINVAL;
 		}
 
 	} else if (state == BACO_STATE_OUT) {
-		if (smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ExitBaco))
+		if (smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ExitBaco, NULL))
 			return -EINVAL;
 		if (!soc15_baco_program_registers(hwmgr, clean_baco_tbl,
 						     ARRAY_SIZE(clean_baco_tbl)))
@@ -118,5 +118,5 @@ int vega20_baco_apply_vdci_flush_workaround(struct pp_hwmgr *hwmgr)
 	if (ret)
 		return ret;
 
-	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_BacoWorkAroundFlushVDCI);
+	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_BacoWorkAroundFlushVDCI, NULL);
 }
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index 08b6ba39a6d7..9ff470f1b826 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -92,8 +92,7 @@ static void vega20_set_default_registry_data(struct pp_hwmgr *hwmgr)
 	 */
 	data->registry_data.disallowed_features = 0xE0041C00;
 	/* ECC feature should be disabled on old SMUs */
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetSmuVersion);
-	hwmgr->smu_version = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetSmuVersion, &hwmgr->smu_version);
 	if (hwmgr->smu_version < 0x282100)
 		data->registry_data.disallowed_features |= FEATURE_ECC_MASK;
 
@@ -400,10 +399,8 @@ static void vega20_init_dpm_defaults(struct pp_hwmgr *hwmgr)
 	}
 
 	/* Get the SN to turn into a Unique ID */
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumTop32);
-	top32 = smum_get_argument(hwmgr);
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumBottom32);
-	bottom32 = smum_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumTop32, &top32);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ReadSerialNumBottom32, &bottom32);
 
 	adev->unique_id = ((uint64_t)bottom32 << 32) | top32;
 }
@@ -527,16 +524,12 @@ static int vega20_get_number_of_dpm_level(struct pp_hwmgr *hwmgr,
 
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_GetDpmFreqByIndex,
-			(clk_id << 16 | 0xFF));
+			(clk_id << 16 | 0xFF),
+			num_of_levels);
 	PP_ASSERT_WITH_CODE(!ret,
 			"[GetNumOfDpmLevel] failed to get dpm levels!",
 			return ret);
 
-	*num_of_levels = smum_get_argument(hwmgr);
-	PP_ASSERT_WITH_CODE(*num_of_levels > 0,
-			"[GetNumOfDpmLevel] number of clk levels is invalid!",
-			return -EINVAL);
-
 	return ret;
 }
 
@@ -547,16 +540,12 @@ static int vega20_get_dpm_frequency_by_index(struct pp_hwmgr *hwmgr,
 
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_GetDpmFreqByIndex,
-			(clk_id << 16 | index));
+			(clk_id << 16 | index),
+			clk);
 	PP_ASSERT_WITH_CODE(!ret,
 			"[GetDpmFreqByIndex] failed to get dpm freq by index!",
 			return ret);
 
-	*clk = smum_get_argument(hwmgr);
-	PP_ASSERT_WITH_CODE(*clk,
-			"[GetDpmFreqByIndex] clk value is invalid!",
-			return -EINVAL);
-
 	return ret;
 }
 
@@ -813,7 +802,8 @@ static int vega20_init_smc_table(struct pp_hwmgr *hwmgr)
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetMinDeepSleepDcefclk,
-		(uint32_t)(data->vbios_boot_state.dcef_clock / 100));
+		(uint32_t)(data->vbios_boot_state.dcef_clock / 100),
+			NULL);
 
 	memcpy(pp_table, pptable_information->smc_pptable, sizeof(PPTable_t));
 
@@ -868,7 +858,8 @@ static int vega20_override_pcie_parameters(struct pp_hwmgr *hwmgr)
 	 */
 	smu_pcie_arg = (1 << 16) | (pcie_gen << 8) | pcie_width;
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_OverridePcieParameters, smu_pcie_arg);
+			PPSMC_MSG_OverridePcieParameters, smu_pcie_arg,
+			NULL);
 	PP_ASSERT_WITH_CODE(!ret,
 		"[OverridePcieParameters] Attempt to override pcie params failed!",
 		return ret);
@@ -899,13 +890,13 @@ static int vega20_set_allowed_featuresmask(struct pp_hwmgr *hwmgr)
 				  & 0xFFFFFFFF));
 
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
-		PPSMC_MSG_SetAllowedFeaturesMaskHigh, allowed_features_high);
+		PPSMC_MSG_SetAllowedFeaturesMaskHigh, allowed_features_high, NULL);
 	PP_ASSERT_WITH_CODE(!ret,
 		"[SetAllowedFeaturesMask] Attempt to set allowed features mask(high) failed!",
 		return ret);
 
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
-		PPSMC_MSG_SetAllowedFeaturesMaskLow, allowed_features_low);
+		PPSMC_MSG_SetAllowedFeaturesMaskLow, allowed_features_low, NULL);
 	PP_ASSERT_WITH_CODE(!ret,
 		"[SetAllowedFeaturesMask] Attempt to set allowed features mask (low) failed!",
 		return ret);
@@ -915,12 +906,12 @@ static int vega20_set_allowed_featuresmask(struct pp_hwmgr *hwmgr)
 
 static int vega20_run_btc(struct pp_hwmgr *hwmgr)
 {
-	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunBtc);
+	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunBtc, NULL);
 }
 
 static int vega20_run_btc_afll(struct pp_hwmgr *hwmgr)
 {
-	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAfllBtc);
+	return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAfllBtc, NULL);
 }
 
 static int vega20_enable_all_smu_features(struct pp_hwmgr *hwmgr)
@@ -933,7 +924,8 @@ static int vega20_enable_all_smu_features(struct pp_hwmgr *hwmgr)
 	int ret = 0;
 
 	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr,
-			PPSMC_MSG_EnableAllSmuFeatures)) == 0,
+			PPSMC_MSG_EnableAllSmuFeatures,
+			NULL)) == 0,
 			"[EnableAllSMUFeatures] Failed to enable all smu features!",
 			return ret);
 
@@ -966,7 +958,8 @@ static int vega20_notify_smc_display_change(struct pp_hwmgr *hwmgr)
 	if (data->smu_features[GNLD_DPM_UCLK].enabled)
 		return smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetUclkFastSwitch,
-			1);
+			1,
+			NULL);
 
 	return 0;
 }
@@ -978,7 +971,8 @@ static int vega20_send_clock_ratio(struct pp_hwmgr *hwmgr)
 
 	return smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetFclkGfxClkRatio,
-			data->registry_data.fclk_gfxclk_ratio);
+			data->registry_data.fclk_gfxclk_ratio,
+			NULL);
 }
 
 static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
@@ -991,7 +985,8 @@ static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
 	int ret = 0;
 
 	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr,
-			PPSMC_MSG_DisableAllSmuFeatures)) == 0,
+			PPSMC_MSG_DisableAllSmuFeatures,
+			NULL)) == 0,
 			"[DisableAllSMUFeatures] Failed to disable all smu features!",
 			return ret);
 
@@ -1199,12 +1194,12 @@ static int vega20_od8_get_gfx_clock_base_voltage(
 
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_GetAVFSVoltageByDpm,
-			((AVFS_CURVE << 24) | (OD8_HOTCURVE_TEMPERATURE << 16) | freq));
+			((AVFS_CURVE << 24) | (OD8_HOTCURVE_TEMPERATURE << 16) | freq),
+			voltage);
 	PP_ASSERT_WITH_CODE(!ret,
 			"[GetBaseVoltage] failed to get GFXCLK AVFS voltage from SMU!",
 			return ret);
 
-	*voltage = smum_get_argument(hwmgr);
 	*voltage = *voltage / VOLTAGE_SCALE;
 
 	return 0;
@@ -1560,19 +1555,19 @@ static int vega20_get_max_sustainable_clock(struct pp_hwmgr *hwmgr,
 
 	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_GetDcModeMaxDpmFreq,
-			(clock_select << 16))) == 0,
+			(clock_select << 16),
+			clock)) == 0,
 			"[GetMaxSustainableClock] Failed to get max DC clock from SMC!",
 			return ret);
-	*clock = smum_get_argument(hwmgr);
 
 	/* if DC limit is zero, return AC limit */
 	if (*clock == 0) {
 		PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_GetMaxDpmFreq,
-			(clock_select << 16))) == 0,
+			(clock_select << 16),
+			clock)) == 0,
 			"[GetMaxSustainableClock] failed to get max AC clock from SMC!",
 			return ret);
-		*clock = smum_get_argument(hwmgr);
 	}
 
 	return 0;
@@ -1641,7 +1636,8 @@ static int vega20_enable_mgpu_fan_boost(struct pp_hwmgr *hwmgr)
 	int result;
 
 	result = smum_send_msg_to_smc(hwmgr,
-		PPSMC_MSG_SetMGpuFanBoostLimitRpm);
+		PPSMC_MSG_SetMGpuFanBoostLimitRpm,
+		NULL);
 	PP_ASSERT_WITH_CODE(!result,
 			"[EnableMgpuFan] Failed to enable mgpu fan boost!",
 			return result);
@@ -1669,7 +1665,7 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
 	int result = 0;
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_NumOfDisplays, 0);
+			PPSMC_MSG_NumOfDisplays, 0, NULL);
 
 	result = vega20_set_allowed_featuresmask(hwmgr);
 	PP_ASSERT_WITH_CODE(!result,
@@ -1740,12 +1736,12 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
 			return result);
 
 	result = smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetPptLimit,
-			POWER_SOURCE_AC << 16);
+			POWER_SOURCE_AC << 16, &hwmgr->default_power_limit);
 	PP_ASSERT_WITH_CODE(!result,
 			"[GetPptLimit] get default PPT limit failed!",
 			return result);
 	hwmgr->power_limit =
-		hwmgr->default_power_limit = smum_get_argument(hwmgr);
+		hwmgr->default_power_limit;
 
 	return 0;
 }
@@ -1806,7 +1802,8 @@ static int vega20_upload_dpm_min_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 		min_freq = data->dpm_table.gfx_table.dpm_state.soft_min_level;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_GFXCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_GFXCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min gfxclk !",
 					return ret);
 	}
@@ -1816,7 +1813,8 @@ static int vega20_upload_dpm_min_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 		min_freq = data->dpm_table.mem_table.dpm_state.soft_min_level;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_UCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_UCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min memclk !",
 					return ret);
 	}
@@ -1827,7 +1825,8 @@ static int vega20_upload_dpm_min_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_VCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_VCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min vclk!",
 					return ret);
 
@@ -1835,7 +1834,8 @@ static int vega20_upload_dpm_min_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_DCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_DCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min dclk!",
 					return ret);
 	}
@@ -1846,7 +1846,8 @@ static int vega20_upload_dpm_min_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_ECLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_ECLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min eclk!",
 					return ret);
 	}
@@ -1857,7 +1858,8 @@ static int vega20_upload_dpm_min_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_SOCCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_SOCCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min socclk!",
 					return ret);
 	}
@@ -1868,7 +1870,8 @@ static int vega20_upload_dpm_min_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMinByFreq,
-					(PPCLK_FCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_FCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set soft min fclk!",
 					return ret);
 	}
@@ -1879,7 +1882,8 @@ static int vega20_upload_dpm_min_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetHardMinByFreq,
-					(PPCLK_DCEFCLK << 16) | (min_freq & 0xffff))),
+					(PPCLK_DCEFCLK << 16) | (min_freq & 0xffff),
+					NULL)),
 					"Failed to set hard min dcefclk!",
 					return ret);
 	}
@@ -1900,7 +1904,8 @@ static int vega20_upload_dpm_max_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_GFXCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_GFXCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max gfxclk!",
 					return ret);
 	}
@@ -1911,7 +1916,8 @@ static int vega20_upload_dpm_max_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_UCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_UCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max memclk!",
 					return ret);
 	}
@@ -1922,14 +1928,16 @@ static int vega20_upload_dpm_max_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_VCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_VCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max vclk!",
 					return ret);
 
 		max_freq = data->dpm_table.dclk_table.dpm_state.soft_max_level;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_DCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_DCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max dclk!",
 					return ret);
 	}
@@ -1940,7 +1948,8 @@ static int vega20_upload_dpm_max_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_ECLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_ECLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max eclk!",
 					return ret);
 	}
@@ -1951,7 +1960,8 @@ static int vega20_upload_dpm_max_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_SOCCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_SOCCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max socclk!",
 					return ret);
 	}
@@ -1962,7 +1972,8 @@ static int vega20_upload_dpm_max_level(struct pp_hwmgr *hwmgr, uint32_t feature_
 
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetSoftMaxByFreq,
-					(PPCLK_FCLK << 16) | (max_freq & 0xffff))),
+					(PPCLK_FCLK << 16) | (max_freq & 0xffff),
+					NULL)),
 					"Failed to set soft max fclk!",
 					return ret);
 	}
@@ -2006,17 +2017,17 @@ static int vega20_get_clock_ranges(struct pp_hwmgr *hwmgr,
 
 	if (max) {
 		PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_GetMaxDpmFreq, (clock_select << 16))) == 0,
+				PPSMC_MSG_GetMaxDpmFreq, (clock_select << 16),
+				clock)) == 0,
 				"[GetClockRanges] Failed to get max clock from SMC!",
 				return ret);
-		*clock = smum_get_argument(hwmgr);
 	} else {
 		PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_GetMinDpmFreq,
-				(clock_select << 16))) == 0,
+				(clock_select << 16),
+				clock)) == 0,
 				"[GetClockRanges] Failed to get min clock from SMC!",
 				return ret);
-		*clock = smum_get_argument(hwmgr);
 	}
 
 	return 0;
@@ -2122,10 +2133,10 @@ static int vega20_get_current_clk_freq(struct pp_hwmgr *hwmgr,
 	*clk_freq = 0;
 
 	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_GetDpmClockFreq, (clk_id << 16))) == 0,
+			PPSMC_MSG_GetDpmClockFreq, (clk_id << 16),
+			clk_freq)) == 0,
 			"[GetCurrentClkFreq] Attempt to get Current Frequency Failed!",
 			return ret);
-	*clk_freq = smum_get_argument(hwmgr);
 
 	*clk_freq = *clk_freq * 100;
 
@@ -2276,7 +2287,8 @@ int vega20_display_clock_voltage_request(struct pp_hwmgr *hwmgr,
 			clk_request = (clk_select << 16) | clk_freq;
 			result = smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetHardMinByFreq,
-					clk_request);
+					clk_request,
+					NULL);
 		}
 	}
 
@@ -2312,7 +2324,8 @@ static int vega20_notify_smc_display_config_after_ps_adjustment(
 			if (data->smu_features[GNLD_DS_DCEFCLK].supported)
 				PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(
 					hwmgr, PPSMC_MSG_SetMinDeepSleepDcefclk,
-					min_clocks.dcefClockInSR / 100)) == 0,
+					min_clocks.dcefClockInSR / 100,
+					NULL)) == 0,
 					"Attempt to set divider for DCEFCLK Failed!",
 					return ret);
 		} else {
@@ -2324,7 +2337,8 @@ static int vega20_notify_smc_display_config_after_ps_adjustment(
 		dpm_table->dpm_state.hard_min_level = min_clocks.memoryClock / 100;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetHardMinByFreq,
-				(PPCLK_UCLK << 16 ) | dpm_table->dpm_state.hard_min_level)),
+				(PPCLK_UCLK << 16 ) | dpm_table->dpm_state.hard_min_level,
+				NULL)),
 				"[SetHardMinFreq] Set hard min uclk failed!",
 				return ret);
 	}
@@ -2656,7 +2670,8 @@ static int vega20_force_clock_level(struct pp_hwmgr *hwmgr,
 			return -EINVAL;
 
 		ret = smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_SetMinLinkDpmByIndex, soft_min_level);
+			PPSMC_MSG_SetMinLinkDpmByIndex, soft_min_level,
+			NULL);
 		PP_ASSERT_WITH_CODE(!ret,
 			"Failed to set min link dpm level!",
 			return ret);
@@ -3140,7 +3155,7 @@ static int vega20_set_mp1_state(struct pp_hwmgr *hwmgr,
 		return 0;
 	}
 
-	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr, msg)) == 0,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr, msg, NULL)) == 0,
 			    "[PrepareMp1] Failed!",
 			    return ret);
 
@@ -3495,7 +3510,8 @@ static int vega20_set_uclk_to_highest_dpm_level(struct pp_hwmgr *hwmgr,
 		dpm_table->dpm_state.hard_min_level = dpm_table->dpm_levels[dpm_table->count - 1].value;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetHardMinByFreq,
-				(PPCLK_UCLK << 16 ) | dpm_table->dpm_state.hard_min_level)),
+				(PPCLK_UCLK << 16 ) | dpm_table->dpm_state.hard_min_level,
+				NULL)),
 				"[SetUclkToHightestDpmLevel] Set hard min uclk failed!",
 				return ret);
 	}
@@ -3520,7 +3536,8 @@ static int vega20_set_fclk_to_highest_dpm_level(struct pp_hwmgr *hwmgr)
 		dpm_table->dpm_state.soft_min_level = dpm_table->dpm_levels[dpm_table->count - 1].value;
 		PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetSoftMinByFreq,
-				(PPCLK_FCLK << 16 ) | dpm_table->dpm_state.soft_min_level)),
+				(PPCLK_FCLK << 16 ) | dpm_table->dpm_state.soft_min_level,
+				NULL)),
 				"[SetFclkToHightestDpmLevel] Set soft min fclk failed!",
 				return ret);
 	}
@@ -3534,7 +3551,7 @@ static int vega20_pre_display_configuration_changed_task(struct pp_hwmgr *hwmgr)
 	int ret = 0;
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_NumOfDisplays, 0);
+			PPSMC_MSG_NumOfDisplays, 0, NULL);
 
 	ret = vega20_set_uclk_to_highest_dpm_level(hwmgr,
 			&data->dpm_table.mem_table);
@@ -3565,7 +3582,8 @@ static int vega20_display_configuration_changed_task(struct pp_hwmgr *hwmgr)
 	    data->smu_features[GNLD_DPM_SOCCLK].supported) {
 		result = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_NumOfDisplays,
-			hwmgr->display_config->num_display);
+			hwmgr->display_config->num_display,
+			NULL);
 	}
 
 	return result;
@@ -4082,7 +4100,8 @@ static int vega20_set_power_profile_mode(struct pp_hwmgr *hwmgr, long *input, ui
 	workload_type =
 		conv_power_profile_to_pplib_workload(power_profile_mode);
 	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetWorkloadMask,
-						1 << workload_type);
+						1 << workload_type,
+						NULL);
 
 	hwmgr->power_profile_mode = power_profile_mode;
 
@@ -4098,21 +4117,26 @@ static int vega20_notify_cac_buffer_info(struct pp_hwmgr *hwmgr,
 {
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetSystemVirtualDramAddrHigh,
-					virtual_addr_hi);
+					virtual_addr_hi,
+					NULL);
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetSystemVirtualDramAddrLow,
-					virtual_addr_low);
+					virtual_addr_low,
+					NULL);
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramLogSetDramAddrHigh,
-					mc_addr_hi);
+					mc_addr_hi,
+					NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramLogSetDramAddrLow,
-					mc_addr_low);
+					mc_addr_low,
+					NULL);
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DramLogSetDramSize,
-					size);
+					size,
+					NULL);
 	return 0;
 }
 
@@ -4153,7 +4177,8 @@ static int vega20_smu_i2c_bus_access(struct pp_hwmgr *hwmgr, bool acquire)
 						  (acquire ?
 						  PPSMC_MSG_RequestI2CBus :
 						  PPSMC_MSG_ReleaseI2CBus),
-						  0);
+						  0,
+						  NULL);
 
 	PP_ASSERT_WITH_CODE(!res, "[SmuI2CAccessBus] Failed to access bus!", return res);
 	return res;
@@ -4170,7 +4195,8 @@ static int vega20_set_df_cstate(struct pp_hwmgr *hwmgr,
 		return -EINVAL;
 	}
 
-	ret = smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_DFCstateControl, state);
+	ret = smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_DFCstateControl, state,
+				NULL);
 	if (ret)
 		pr_err("SetDfCstate failed!\n");
 
@@ -4184,7 +4210,8 @@ static int vega20_set_xgmi_pstate(struct pp_hwmgr *hwmgr,
 
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 						  PPSMC_MSG_SetXgmiMode,
-						  pstate ? XGMI_MODE_PSTATE_D0 : XGMI_MODE_PSTATE_D3);
+						  pstate ? XGMI_MODE_PSTATE_D0 : XGMI_MODE_PSTATE_D3,
+						  NULL);
 	if (ret)
 		pr_err("SetXgmiPstate failed!\n");
 
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_powertune.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_powertune.c
index a0bfb65cc5d6..d7cc3d2d9e17 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_powertune.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_powertune.c
@@ -36,7 +36,8 @@ int vega20_set_power_limit(struct pp_hwmgr *hwmgr, uint32_t n)
 
 	if (data->smu_features[GNLD_PPT].enabled)
 		return smum_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_SetPptLimit, n);
+				PPSMC_MSG_SetPptLimit, n,
+				NULL);
 
 	return 0;
 }
@@ -51,7 +52,8 @@ static int vega20_set_overdrive_target_percentage(struct pp_hwmgr *hwmgr,
 		uint32_t adjust_percent)
 {
 	return smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_OverDriveSetPercentage, adjust_percent);
+			PPSMC_MSG_OverDriveSetPercentage, adjust_percent,
+			NULL);
 }
 
 int vega20_power_control_set_level(struct pp_hwmgr *hwmgr)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_thermal.c
index ede54e87e287..7add2f60f49c 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_thermal.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_thermal.c
@@ -106,10 +106,10 @@ static int vega20_get_current_rpm(struct pp_hwmgr *hwmgr, uint32_t *current_rpm)
 	int ret = 0;
 
 	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr,
-				PPSMC_MSG_GetCurrentRpm)) == 0,
+				PPSMC_MSG_GetCurrentRpm,
+				current_rpm)) == 0,
 			"Attempt to get current RPM from SMC Failed!",
 			return ret);
-	*current_rpm = smum_get_argument(hwmgr);
 
 	return 0;
 }
@@ -329,7 +329,8 @@ static int vega20_thermal_setup_fan_table(struct pp_hwmgr *hwmgr)
 
 	ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetFanTemperatureTarget,
-				(uint32_t)table->FanTargetTemperature);
+				(uint32_t)table->FanTargetTemperature,
+				NULL);
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
index ae2c318dd6fa..928eed220f93 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
@@ -405,7 +405,9 @@ struct smu_context
 	bool pm_enabled;
 	bool is_apu;
 
-	uint32_t smc_if_version;
+	uint32_t smc_driver_if_version;
+	uint32_t smc_fw_if_version;
+	uint32_t smc_fw_version;
 
 	bool uploading_custom_pp_table;
 	bool dc_controlled_by_gpio;
@@ -580,11 +582,6 @@ int smu_check_fw_status(struct smu_context *smu);
 
 int smu_set_gfx_cgpg(struct smu_context *smu, bool enabled);
 
-#define smu_i2c_eeprom_init(smu, control) \
-		((smu)->ppt_funcs->i2c_eeprom_init ? (smu)->ppt_funcs->i2c_eeprom_init((control)) : -EINVAL)
-#define smu_i2c_eeprom_fini(smu, control) \
-		((smu)->ppt_funcs->i2c_eeprom_fini ? (smu)->ppt_funcs->i2c_eeprom_fini((control)) : -EINVAL)
-
 int smu_set_fan_speed_rpm(struct smu_context *smu, uint32_t speed);
 
 int smu_get_power_limit(struct smu_context *smu,
diff --git a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
index 2ffb666b97e6..15ed6cbdf366 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
@@ -743,6 +743,7 @@ struct pp_hwmgr {
 	bool pm_en;
 	bool pp_one_vf;
 	struct mutex smu_lock;
+	struct mutex msg_lock;
 
 	uint32_t pp_table_version;
 	void *device;
diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu11_driver_if_arcturus.h b/drivers/gpu/drm/amd/powerplay/inc/smu11_driver_if_arcturus.h
index ce5b5011c122..8b82059d97e7 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/smu11_driver_if_arcturus.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/smu11_driver_if_arcturus.h
@@ -82,8 +82,8 @@
 // Other
 #define FEATURE_OUT_OF_BAND_MONITOR_BIT 24
 #define FEATURE_TEMP_DEPENDENT_VMIN_BIT 25
+#define FEATURE_PER_PART_VMIN_BIT       26
 
-#define FEATURE_SPARE_26_BIT            26
 #define FEATURE_SPARE_27_BIT            27
 #define FEATURE_SPARE_28_BIT            28
 #define FEATURE_SPARE_29_BIT            29
@@ -154,6 +154,7 @@
 
 #define FEATURE_OUT_OF_BAND_MONITOR_MASK  (1 << FEATURE_OUT_OF_BAND_MONITOR_BIT   )
 #define FEATURE_TEMP_DEPENDENT_VMIN_MASK  (1 << FEATURE_TEMP_DEPENDENT_VMIN_BIT )
+#define FEATURE_PER_PART_VMIN_MASK        (1 << FEATURE_PER_PART_VMIN_BIT        )
 
 
 //FIXME need updating
@@ -628,8 +629,14 @@ typedef struct {
   uint16_t BasePerformanceFrequencyCap;   //In Mhz
   uint16_t MaxPerformanceFrequencyCap;    //In Mhz
 
+  // Per-Part Vmin
+  uint16_t VDDGFX_VminLow;        // mv Q2
+  uint16_t VDDGFX_TVminLow;       //Celcius
+  uint16_t VDDGFX_VminLow_HiTemp; // mv Q2
+  uint16_t VDDGFX_VminLow_LoTemp; // mv Q2
+
   // SECTION: Reserved
-  uint32_t     Reserved[9];
+  uint32_t     Reserved[7];
 
   // SECTION: BOARD PARAMETERS
 
@@ -869,6 +876,10 @@ typedef struct {
   uint8_t   Mem_DownHystLimit;
   uint16_t  Mem_Fps;
 
+  uint32_t  BusyThreshold;                  // Q16
+  uint32_t  BusyHyst;
+  uint32_t  IdleHyst;
+
   uint32_t  MmHubPadding[8]; // SMU internal use
 } DpmActivityMonitorCoeffInt_t;
 
diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu12_driver_if.h b/drivers/gpu/drm/amd/powerplay/inc/smu12_driver_if.h
index 2f85a34c0591..e9315eb5b48e 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/smu12_driver_if.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/smu12_driver_if.h
@@ -27,7 +27,7 @@
 // *** IMPORTANT ***
 // SMU TEAM: Always increment the interface version if 
 // any structure is changed in this file
-#define SMU12_DRIVER_IF_VERSION 11
+#define SMU12_DRIVER_IF_VERSION 14
 
 typedef struct {
   int32_t value;
@@ -154,15 +154,19 @@ typedef enum {
 } CLOCK_IDs_e;
 
 // Throttler Status Bitmask
-#define THROTTLER_STATUS_BIT_SPL        0
-#define THROTTLER_STATUS_BIT_FPPT       1
-#define THROTTLER_STATUS_BIT_SPPT       2
-#define THROTTLER_STATUS_BIT_SPPT_APU   3
-#define THROTTLER_STATUS_BIT_THM_CORE   4
-#define THROTTLER_STATUS_BIT_THM_GFX    5
-#define THROTTLER_STATUS_BIT_THM_SOC    6
-#define THROTTLER_STATUS_BIT_TDC_VDD    7
-#define THROTTLER_STATUS_BIT_TDC_SOC    8
+#define THROTTLER_STATUS_BIT_SPL            0
+#define THROTTLER_STATUS_BIT_FPPT           1
+#define THROTTLER_STATUS_BIT_SPPT           2
+#define THROTTLER_STATUS_BIT_SPPT_APU       3
+#define THROTTLER_STATUS_BIT_THM_CORE       4
+#define THROTTLER_STATUS_BIT_THM_GFX        5
+#define THROTTLER_STATUS_BIT_THM_SOC        6
+#define THROTTLER_STATUS_BIT_TDC_VDD        7
+#define THROTTLER_STATUS_BIT_TDC_SOC        8
+#define THROTTLER_STATUS_BIT_PROCHOT_CPU    9
+#define THROTTLER_STATUS_BIT_PROCHOT_GFX   10
+#define THROTTLER_STATUS_BIT_EDC_CPU       11
+#define THROTTLER_STATUS_BIT_EDC_GFX       12
 
 typedef struct {
   uint16_t ClockFrequency[CLOCK_COUNT]; //[MHz]
@@ -180,7 +184,7 @@ typedef struct {
   uint16_t Power[2];                    //[mW] indices: VDDCR_VDD, VDDCR_SOC
 
   uint16_t FanPwm;                      //[milli]
-  uint16_t CurrentSocketPower;          //[mW]
+  uint16_t CurrentSocketPower;          //[W]
 
   uint16_t CoreFrequency[8];            //[MHz]
   uint16_t CorePower[8];                //[mW]
@@ -193,10 +197,16 @@ typedef struct {
   uint16_t ThrottlerStatus;
   uint16_t spare;
 
-  uint16_t StapmOriginalLimit;          //[mW]
-  uint16_t StapmCurrentLimit;           //[mW]
-  uint16_t ApuPower;              //[mW]
-  uint16_t dGpuPower;               //[mW]
+  uint16_t StapmOriginalLimit;          //[W]
+  uint16_t StapmCurrentLimit;           //[W]
+  uint16_t ApuPower;                    //[W]
+  uint16_t dGpuPower;                   //[W]
+
+  uint16_t VddTdcValue;                 //[mA]
+  uint16_t SocTdcValue;                 //[mA]
+  uint16_t VddEdcValue;                 //[mA]
+  uint16_t SocEdcValue;                 //[mA]
+  uint16_t reserve[2];
 } SmuMetrics_t;
 
 
diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h b/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
index 674e426ed59b..6b3b451a8018 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
@@ -27,8 +27,8 @@
 
 #define SMU11_DRIVER_IF_VERSION_INV 0xFFFFFFFF
 #define SMU11_DRIVER_IF_VERSION_VG20 0x13
-#define SMU11_DRIVER_IF_VERSION_ARCT 0x12
-#define SMU11_DRIVER_IF_VERSION_NV10 0x35
+#define SMU11_DRIVER_IF_VERSION_ARCT 0x14
+#define SMU11_DRIVER_IF_VERSION_NV10 0x36
 #define SMU11_DRIVER_IF_VERSION_NV12 0x33
 #define SMU11_DRIVER_IF_VERSION_NV14 0x36
 
@@ -37,7 +37,6 @@
 #define MP0_SRAM			0x03900000
 #define MP1_Public			0x03b00000
 #define MP1_SRAM			0x03c00004
-#define MP1_SMC_SIZE		0x40000
 
 /* address block */
 #define smnMP1_FIRMWARE_FLAGS		0x3010024
diff --git a/drivers/gpu/drm/amd/powerplay/inc/smumgr.h b/drivers/gpu/drm/amd/powerplay/inc/smumgr.h
index c5288831aa15..ad100b533d04 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/smumgr.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/smumgr.h
@@ -81,16 +81,15 @@ enum SMU10_TABLE_ID {
 	SMU10_CLOCKTABLE,
 };
 
-extern uint32_t smum_get_argument(struct pp_hwmgr *hwmgr);
-
 extern int smum_download_powerplay_table(struct pp_hwmgr *hwmgr, void **table);
 
 extern int smum_upload_powerplay_table(struct pp_hwmgr *hwmgr);
 
-extern int smum_send_msg_to_smc(struct pp_hwmgr *hwmgr, uint16_t msg);
+extern int smum_send_msg_to_smc(struct pp_hwmgr *hwmgr, uint16_t msg, uint32_t *resp);
 
 extern int smum_send_msg_to_smc_with_parameter(struct pp_hwmgr *hwmgr,
-					uint16_t msg, uint32_t parameter);
+					uint16_t msg, uint32_t parameter,
+					uint32_t *resp);
 
 extern int smum_update_sclk_threshold(struct pp_hwmgr *hwmgr);
 
diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
index 15030284b444..2184d247a9f7 100644
--- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
@@ -423,6 +423,7 @@ static int navi10_append_powerplay_table(struct smu_context *smu)
 	struct smu_table_context *table_context = &smu->smu_table;
 	PPTable_t *smc_pptable = table_context->driver_pptable;
 	struct atom_smc_dpm_info_v4_5 *smc_dpm_table;
+	struct atom_smc_dpm_info_v4_7 *smc_dpm_table_v4_7;
 	int index, ret;
 
 	index = get_index_into_master_table(atom_master_list_of_data_tables_v2_1,
@@ -433,77 +434,33 @@ static int navi10_append_powerplay_table(struct smu_context *smu)
 	if (ret)
 		return ret;
 
-	memcpy(smc_pptable->I2cControllers, smc_dpm_table->I2cControllers,
-	       sizeof(I2cControllerConfig_t) * NUM_I2C_CONTROLLERS);
-
-	/* SVI2 Board Parameters */
-	smc_pptable->MaxVoltageStepGfx = smc_dpm_table->MaxVoltageStepGfx;
-	smc_pptable->MaxVoltageStepSoc = smc_dpm_table->MaxVoltageStepSoc;
-	smc_pptable->VddGfxVrMapping = smc_dpm_table->VddGfxVrMapping;
-	smc_pptable->VddSocVrMapping = smc_dpm_table->VddSocVrMapping;
-	smc_pptable->VddMem0VrMapping = smc_dpm_table->VddMem0VrMapping;
-	smc_pptable->VddMem1VrMapping = smc_dpm_table->VddMem1VrMapping;
-	smc_pptable->GfxUlvPhaseSheddingMask = smc_dpm_table->GfxUlvPhaseSheddingMask;
-	smc_pptable->SocUlvPhaseSheddingMask = smc_dpm_table->SocUlvPhaseSheddingMask;
-	smc_pptable->ExternalSensorPresent = smc_dpm_table->ExternalSensorPresent;
-	smc_pptable->Padding8_V = smc_dpm_table->Padding8_V;
-
-	/* Telemetry Settings */
-	smc_pptable->GfxMaxCurrent = smc_dpm_table->GfxMaxCurrent;
-	smc_pptable->GfxOffset = smc_dpm_table->GfxOffset;
-	smc_pptable->Padding_TelemetryGfx = smc_dpm_table->Padding_TelemetryGfx;
-	smc_pptable->SocMaxCurrent = smc_dpm_table->SocMaxCurrent;
-	smc_pptable->SocOffset = smc_dpm_table->SocOffset;
-	smc_pptable->Padding_TelemetrySoc = smc_dpm_table->Padding_TelemetrySoc;
-	smc_pptable->Mem0MaxCurrent = smc_dpm_table->Mem0MaxCurrent;
-	smc_pptable->Mem0Offset = smc_dpm_table->Mem0Offset;
-	smc_pptable->Padding_TelemetryMem0 = smc_dpm_table->Padding_TelemetryMem0;
-	smc_pptable->Mem1MaxCurrent = smc_dpm_table->Mem1MaxCurrent;
-	smc_pptable->Mem1Offset = smc_dpm_table->Mem1Offset;
-	smc_pptable->Padding_TelemetryMem1 = smc_dpm_table->Padding_TelemetryMem1;
-
-	/* GPIO Settings */
-	smc_pptable->AcDcGpio = smc_dpm_table->AcDcGpio;
-	smc_pptable->AcDcPolarity = smc_dpm_table->AcDcPolarity;
-	smc_pptable->VR0HotGpio = smc_dpm_table->VR0HotGpio;
-	smc_pptable->VR0HotPolarity = smc_dpm_table->VR0HotPolarity;
-	smc_pptable->VR1HotGpio = smc_dpm_table->VR1HotGpio;
-	smc_pptable->VR1HotPolarity = smc_dpm_table->VR1HotPolarity;
-	smc_pptable->GthrGpio = smc_dpm_table->GthrGpio;
-	smc_pptable->GthrPolarity = smc_dpm_table->GthrPolarity;
-
-	/* LED Display Settings */
-	smc_pptable->LedPin0 = smc_dpm_table->LedPin0;
-	smc_pptable->LedPin1 = smc_dpm_table->LedPin1;
-	smc_pptable->LedPin2 = smc_dpm_table->LedPin2;
-	smc_pptable->padding8_4 = smc_dpm_table->padding8_4;
-
-	/* GFXCLK PLL Spread Spectrum */
-	smc_pptable->PllGfxclkSpreadEnabled = smc_dpm_table->PllGfxclkSpreadEnabled;
-	smc_pptable->PllGfxclkSpreadPercent = smc_dpm_table->PllGfxclkSpreadPercent;
-	smc_pptable->PllGfxclkSpreadFreq = smc_dpm_table->PllGfxclkSpreadFreq;
-
-	/* GFXCLK DFLL Spread Spectrum */
-	smc_pptable->DfllGfxclkSpreadEnabled = smc_dpm_table->DfllGfxclkSpreadEnabled;
-	smc_pptable->DfllGfxclkSpreadPercent = smc_dpm_table->DfllGfxclkSpreadPercent;
-	smc_pptable->DfllGfxclkSpreadFreq = smc_dpm_table->DfllGfxclkSpreadFreq;
-
-	/* UCLK Spread Spectrum */
-	smc_pptable->UclkSpreadEnabled = smc_dpm_table->UclkSpreadEnabled;
-	smc_pptable->UclkSpreadPercent = smc_dpm_table->UclkSpreadPercent;
-	smc_pptable->UclkSpreadFreq = smc_dpm_table->UclkSpreadFreq;
-
-	/* SOCCLK Spread Spectrum */
-	smc_pptable->SoclkSpreadEnabled = smc_dpm_table->SoclkSpreadEnabled;
-	smc_pptable->SocclkSpreadPercent = smc_dpm_table->SocclkSpreadPercent;
-	smc_pptable->SocclkSpreadFreq = smc_dpm_table->SocclkSpreadFreq;
-
-	/* Total board power */
-	smc_pptable->TotalBoardPower = smc_dpm_table->TotalBoardPower;
-	smc_pptable->BoardPadding = smc_dpm_table->BoardPadding;
-
-	/* Mvdd Svi2 Div Ratio Setting */
-	smc_pptable->MvddRatio = smc_dpm_table->MvddRatio;
+	pr_info("smc_dpm_info table revision(format.content): %d.%d\n",
+			smc_dpm_table->table_header.format_revision,
+			smc_dpm_table->table_header.content_revision);
+
+	if (smc_dpm_table->table_header.format_revision != 4) {
+		pr_err("smc_dpm_info table format revision is not 4!\n");
+		return -EINVAL;
+	}
+
+	switch (smc_dpm_table->table_header.content_revision) {
+	case 5: /* nv10 and nv14 */
+		memcpy(smc_pptable->I2cControllers, smc_dpm_table->I2cControllers,
+			sizeof(*smc_dpm_table) - sizeof(smc_dpm_table->table_header));
+		break;
+	case 7: /* nv12 */
+		ret = smu_get_atom_data_table(smu, index, NULL, NULL, NULL,
+					      (uint8_t **)&smc_dpm_table_v4_7);
+		if (ret)
+			return ret;
+		memcpy(smc_pptable->I2cControllers, smc_dpm_table_v4_7->I2cControllers,
+			sizeof(*smc_dpm_table_v4_7) - sizeof(smc_dpm_table_v4_7->table_header));
+		break;
+	default:
+		pr_err("smc_dpm_info with unsupported content revision %d!\n",
+				smc_dpm_table->table_header.content_revision);
+		return -EINVAL;
+	}
 
 	if (adev->pm.pp_feature & PP_GFXOFF_MASK) {
 		/* TODO: remove it once SMU fw fix it */
@@ -1860,7 +1817,8 @@ static int navi10_get_power_limit(struct smu_context *smu,
 	int power_src;
 
 	if (!smu->power_limit) {
-		if (smu_feature_is_enabled(smu, SMU_FEATURE_PPT_BIT)) {
+		if (smu_feature_is_enabled(smu, SMU_FEATURE_PPT_BIT) &&
+			!amdgpu_sriov_vf(smu->adev)) {
 			power_src = smu_power_get_index(smu, SMU_POWER_SOURCE_AC);
 			if (power_src < 0)
 				return -EINVAL;
@@ -2003,6 +1961,9 @@ static int navi10_set_default_od_settings(struct smu_context *smu, bool initiali
 	OverDriveTable_t *od_table, *boot_od_table;
 	int ret = 0;
 
+	if (amdgpu_sriov_vf(smu->adev))
+		return 0;
+
 	ret = smu_v11_0_set_default_od_settings(smu, initialize, sizeof(OverDriveTable_t));
 	if (ret)
 		return ret;
diff --git a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
index b0ed1b3fe79a..67476047c067 100644
--- a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
@@ -296,6 +296,8 @@ static int renoir_print_clk_levels(struct smu_context *smu,
 
 	for (i = 0; i < count; i++) {
 		GET_DPM_CUR_FREQ(clk_table, clk_type, i, value);
+		if (!value)
+			continue;
 		size += sprintf(buf + size, "%d: %uMhz %s\n", i, value,
 				cur_value == value ? "*" : "");
 		if (cur_value == value)
@@ -847,7 +849,7 @@ static int renoir_get_power_profile_mode(struct smu_context *smu,
 	uint32_t i, size = 0;
 	int16_t workload_type = 0;
 
-	if (!smu->pm_enabled || !buf)
+	if (!buf)
 		return -EINVAL;
 
 	for (i = 0; i <= PP_SMC_POWER_PROFILE_CUSTOM; i++) {
@@ -898,7 +900,7 @@ static bool renoir_is_dpm_running(struct smu_context *smu)
 	struct amdgpu_device *adev = smu->adev;
 
 	/*
-	 * Util now, the pmfw hasn't exported the interface of SMU
+	 * Until now, the pmfw hasn't exported the interface of SMU
 	 * feature mask to APU SKU so just force on all the feature
 	 * at early initial stage.
 	 */
@@ -955,6 +957,6 @@ static const struct pptable_funcs renoir_ppt_funcs = {
 void renoir_set_ppt_funcs(struct smu_context *smu)
 {
 	smu->ppt_funcs = &renoir_ppt_funcs;
-	smu->smc_if_version = SMU12_DRIVER_IF_VERSION;
+	smu->smc_driver_if_version = SMU12_DRIVER_IF_VERSION;
 	smu->is_apu = true;
 }
diff --git a/drivers/gpu/drm/amd/powerplay/smu_internal.h b/drivers/gpu/drm/amd/powerplay/smu_internal.h
index 40c35bcc5a0a..c97444841abc 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_internal.h
+++ b/drivers/gpu/drm/amd/powerplay/smu_internal.h
@@ -214,4 +214,9 @@ static inline int smu_send_smc_msg(struct smu_context *smu, enum smu_message_typ
 #define smu_set_power_source(smu, power_src) \
 	((smu)->ppt_funcs->set_power_source ? (smu)->ppt_funcs->set_power_source((smu), (power_src)) : 0)
 
+#define smu_i2c_eeprom_init(smu, control) \
+		((smu)->ppt_funcs->i2c_eeprom_init ? (smu)->ppt_funcs->i2c_eeprom_init((control)) : 0)
+#define smu_i2c_eeprom_fini(smu, control) \
+		((smu)->ppt_funcs->i2c_eeprom_fini ? (smu)->ppt_funcs->i2c_eeprom_fini((control)) : 0)
+
 #endif
diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
index 655ba4fb05dc..d5a3487ccfac 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
+++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
@@ -57,7 +57,7 @@ static int smu_v11_0_send_msg_without_waiting(struct smu_context *smu,
 					      uint16_t msg)
 {
 	struct amdgpu_device *adev = smu->adev;
-	WREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_66, msg);
+	WREG32_SOC15_NO_KIQ(MP1, 0, mmMP1_SMN_C2PMSG_66, msg);
 	return 0;
 }
 
@@ -65,7 +65,7 @@ static int smu_v11_0_read_arg(struct smu_context *smu, uint32_t *arg)
 {
 	struct amdgpu_device *adev = smu->adev;
 
-	*arg = RREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_82);
+	*arg = RREG32_SOC15_NO_KIQ(MP1, 0, mmMP1_SMN_C2PMSG_82);
 	return 0;
 }
 
@@ -75,7 +75,7 @@ static int smu_v11_0_wait_for_response(struct smu_context *smu)
 	uint32_t cur_value, i, timeout = adev->usec_timeout * 10;
 
 	for (i = 0; i < timeout; i++) {
-		cur_value = RREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_90);
+		cur_value = RREG32_SOC15_NO_KIQ(MP1, 0, mmMP1_SMN_C2PMSG_90);
 		if ((cur_value & MP1_C2PMSG_90__CONTENT_MASK) != 0)
 			return cur_value == 0x1 ? 0 : -EIO;
 
@@ -83,7 +83,10 @@ static int smu_v11_0_wait_for_response(struct smu_context *smu)
 	}
 
 	/* timeout means wrong logic */
-	return -ETIME;
+	if (i == timeout)
+		return -ETIME;
+
+	return RREG32_SOC15_NO_KIQ(MP1, 0, mmMP1_SMN_C2PMSG_90) == 0x1 ? 0 : -EIO;
 }
 
 int
@@ -107,9 +110,9 @@ smu_v11_0_send_msg_with_param(struct smu_context *smu,
 		goto out;
 	}
 
-	WREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_90, 0);
+	WREG32_SOC15_NO_KIQ(MP1, 0, mmMP1_SMN_C2PMSG_90, 0);
 
-	WREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_82, param);
+	WREG32_SOC15_NO_KIQ(MP1, 0, mmMP1_SMN_C2PMSG_82, param);
 
 	smu_v11_0_send_msg_without_waiting(smu, (uint16_t)index);
 
@@ -119,6 +122,7 @@ smu_v11_0_send_msg_with_param(struct smu_context *smu,
 		       smu_get_message_name(smu, msg), index, param, ret);
 		goto out;
 	}
+
 	if (read_arg) {
 		ret = smu_v11_0_read_arg(smu, read_arg);
 		if (ret) {
@@ -201,13 +205,15 @@ int smu_v11_0_load_microcode(struct smu_context *smu)
 	const struct smc_firmware_header_v1_0 *hdr;
 	uint32_t addr_start = MP1_SRAM;
 	uint32_t i;
+	uint32_t smc_fw_size;
 	uint32_t mp1_fw_flags;
 
 	hdr = (const struct smc_firmware_header_v1_0 *) adev->pm.fw->data;
 	src = (const uint32_t *)(adev->pm.fw->data +
 		le32_to_cpu(hdr->header.ucode_array_offset_bytes));
+	smc_fw_size = hdr->header.ucode_size_bytes;
 
-	for (i = 1; i < MP1_SMC_SIZE/4 - 1; i++) {
+	for (i = 1; i < smc_fw_size/4 - 1; i++) {
 		WREG32_PCIE(addr_start, src[i]);
 		addr_start += 4;
 	}
@@ -264,23 +270,23 @@ int smu_v11_0_check_fw_version(struct smu_context *smu)
 
 	switch (smu->adev->asic_type) {
 	case CHIP_VEGA20:
-		smu->smc_if_version = SMU11_DRIVER_IF_VERSION_VG20;
+		smu->smc_driver_if_version = SMU11_DRIVER_IF_VERSION_VG20;
 		break;
 	case CHIP_ARCTURUS:
-		smu->smc_if_version = SMU11_DRIVER_IF_VERSION_ARCT;
+		smu->smc_driver_if_version = SMU11_DRIVER_IF_VERSION_ARCT;
 		break;
 	case CHIP_NAVI10:
-		smu->smc_if_version = SMU11_DRIVER_IF_VERSION_NV10;
+		smu->smc_driver_if_version = SMU11_DRIVER_IF_VERSION_NV10;
 		break;
 	case CHIP_NAVI12:
-		smu->smc_if_version = SMU11_DRIVER_IF_VERSION_NV12;
+		smu->smc_driver_if_version = SMU11_DRIVER_IF_VERSION_NV12;
 		break;
 	case CHIP_NAVI14:
-		smu->smc_if_version = SMU11_DRIVER_IF_VERSION_NV14;
+		smu->smc_driver_if_version = SMU11_DRIVER_IF_VERSION_NV14;
 		break;
 	default:
 		pr_err("smu unsupported asic type:%d.\n", smu->adev->asic_type);
-		smu->smc_if_version = SMU11_DRIVER_IF_VERSION_INV;
+		smu->smc_driver_if_version = SMU11_DRIVER_IF_VERSION_INV;
 		break;
 	}
 
@@ -292,10 +298,10 @@ int smu_v11_0_check_fw_version(struct smu_context *smu)
 	 * Considering above, we just leave user a warning message instead
 	 * of halt driver loading.
 	 */
-	if (if_version != smu->smc_if_version) {
+	if (if_version != smu->smc_driver_if_version) {
 		pr_info("smu driver if version = 0x%08x, smu fw if version = 0x%08x, "
 			"smu fw version = 0x%08x (%d.%d.%d)\n",
-			smu->smc_if_version, if_version,
+			smu->smc_driver_if_version, if_version,
 			smu_version, smu_major, smu_minor, smu_debug);
 		pr_warn("SMU driver if version not matched\n");
 	}
@@ -479,8 +485,6 @@ int smu_v11_0_init_power(struct smu_context *smu)
 {
 	struct smu_power_context *smu_power = &smu->smu_power;
 
-	if (!smu->pm_enabled)
-		return 0;
 	if (smu_power->power_context || smu_power->power_context_size != 0)
 		return -EINVAL;
 
@@ -497,8 +501,6 @@ int smu_v11_0_fini_power(struct smu_context *smu)
 {
 	struct smu_power_context *smu_power = &smu->smu_power;
 
-	if (!smu->pm_enabled)
-		return 0;
 	if (!smu_power->power_context || smu_power->power_context_size == 0)
 		return -EINVAL;
 
@@ -730,8 +732,9 @@ int smu_v11_0_parse_pptable(struct smu_context *smu)
 	struct smu_table_context *table_context = &smu->smu_table;
 	struct smu_table *table = &table_context->tables[SMU_TABLE_PPTABLE];
 
+	/* during TDR we need to free and alloc the pptable */
 	if (table_context->driver_pptable)
-		return -EINVAL;
+		kfree(table_context->driver_pptable);
 
 	table_context->driver_pptable = kzalloc(table->size, GFP_KERNEL);
 
@@ -771,6 +774,9 @@ int smu_v11_0_set_deep_sleep_dcefclk(struct smu_context *smu, uint32_t clk)
 {
 	int ret;
 
+	if (amdgpu_sriov_vf(smu->adev))
+		return 0;
+
 	ret = smu_send_smc_msg_with_param(smu,
 					  SMU_MSG_SetMinDeepSleepDcefclk, clk, NULL);
 	if (ret)
@@ -783,8 +789,6 @@ int smu_v11_0_set_min_dcef_deep_sleep(struct smu_context *smu)
 {
 	struct smu_table_context *table_context = &smu->smu_table;
 
-	if (!smu->pm_enabled)
-		return 0;
 	if (!table_context)
 		return -EINVAL;
 
@@ -816,6 +820,9 @@ int smu_v11_0_set_tool_table_location(struct smu_context *smu)
 	int ret = 0;
 	struct smu_table *tool_table = &smu->smu_table.tables[SMU_TABLE_PMSTATUSLOG];
 
+	if (amdgpu_sriov_vf(smu->adev))
+		return 0;
+
 	if (tool_table->mc_address) {
 		ret = smu_send_smc_msg_with_param(smu,
 				SMU_MSG_SetToolsDramAddrHigh,
@@ -835,6 +842,9 @@ int smu_v11_0_init_display_count(struct smu_context *smu, uint32_t count)
 {
 	int ret = 0;
 
+	if (amdgpu_sriov_vf(smu->adev))
+		return 0;
+
 	if (!smu->pm_enabled)
 		return ret;
 
@@ -849,6 +859,9 @@ int smu_v11_0_set_allowed_mask(struct smu_context *smu)
 	int ret = 0;
 	uint32_t feature_mask[2];
 
+	if (amdgpu_sriov_vf(smu->adev))
+		return 0;
+
 	mutex_lock(&feature->mutex);
 	if (bitmap_empty(feature->allowed, SMU_FEATURE_MAX) || feature->feature_num < 64)
 		goto failed;
@@ -877,6 +890,9 @@ int smu_v11_0_get_enabled_mask(struct smu_context *smu,
 	struct smu_feature *feature = &smu->smu_feature;
 	int ret = 0;
 
+	if (amdgpu_sriov_vf(smu->adev) && !amdgpu_sriov_is_pp_one_vf(smu->adev))
+		return 0;
+
 	if (!feature_mask || num < 2)
 		return -EINVAL;
 
@@ -932,8 +948,12 @@ int smu_v11_0_notify_display_change(struct smu_context *smu)
 {
 	int ret = 0;
 
+	if (amdgpu_sriov_vf(smu->adev))
+		return 0;
+
 	if (!smu->pm_enabled)
 		return ret;
+
 	if (smu_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT) &&
 	    smu->adev->gmc.vram_type == AMDGPU_VRAM_TYPE_HBM)
 		ret = smu_send_smc_msg_with_param(smu, SMU_MSG_SetUclkFastSwitch, 1, NULL);
@@ -948,9 +968,6 @@ smu_v11_0_get_max_sustainable_clock(struct smu_context *smu, uint32_t *clock,
 	int ret = 0;
 	int clk_id;
 
-	if (!smu->pm_enabled)
-		return ret;
-
 	if ((smu_msg_get_index(smu, SMU_MSG_GetDcModeMaxDpmFreq) < 0) ||
 	    (smu_msg_get_index(smu, SMU_MSG_GetMaxDpmFreq) < 0))
 		return 0;
@@ -1096,6 +1113,9 @@ int smu_v11_0_set_power_limit(struct smu_context *smu, uint32_t n)
 	int ret = 0;
 	uint32_t max_power_limit;
 
+	if (amdgpu_sriov_vf(smu->adev))
+		return 0;
+
 	max_power_limit = smu_v11_0_get_max_power_limit(smu);
 
 	if (n > max_power_limit) {
@@ -1205,9 +1225,6 @@ int smu_v11_0_start_thermal_control(struct smu_context *smu)
 	struct smu_temperature_range range;
 	struct amdgpu_device *adev = smu->adev;
 
-	if (!smu->pm_enabled)
-		return ret;
-
 	memcpy(&range, &smu11_thermal_policy[0], sizeof(struct smu_temperature_range));
 
 	ret = smu_get_thermal_temperature_range(smu, &range);
@@ -1321,9 +1338,6 @@ smu_v11_0_display_clock_voltage_request(struct smu_context *smu,
 	enum smu_clk_type clk_select = 0;
 	uint32_t clk_freq = clock_req->clock_freq_in_khz / 1000;
 
-	if (!smu->pm_enabled)
-		return -EINVAL;
-
 	if (smu_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT) ||
 		smu_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) {
 		switch (clk_type) {
@@ -1833,6 +1847,9 @@ int smu_v11_0_override_pcie_parameters(struct smu_context *smu)
 	uint32_t pcie_gen = 0, pcie_width = 0;
 	int ret;
 
+	if (amdgpu_sriov_vf(smu->adev))
+		return 0;
+
 	if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4)
 		pcie_gen = 3;
 	else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3)
diff --git a/drivers/gpu/drm/amd/powerplay/smu_v12_0.c b/drivers/gpu/drm/amd/powerplay/smu_v12_0.c
index 169ebdad87b8..4023d10fb49b 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_v12_0.c
+++ b/drivers/gpu/drm/amd/powerplay/smu_v12_0.c
@@ -32,13 +32,15 @@
 
 #include "asic_reg/mp/mp_12_0_0_offset.h"
 #include "asic_reg/mp/mp_12_0_0_sh_mask.h"
+#include "asic_reg/smuio/smuio_12_0_0_offset.h"
+#include "asic_reg/smuio/smuio_12_0_0_sh_mask.h"
 
-#define smnMP1_FIRMWARE_FLAGS                                0x3010024
+// because some SMU12 based ASICs use older ip offset tables
+// we should undefine this register from the smuio12 header
+// to prevent confusion down the road
+#undef mmPWR_MISC_CNTL_STATUS
 
-#define mmSMUIO_GFX_MISC_CNTL                                0x00c8
-#define mmSMUIO_GFX_MISC_CNTL_BASE_IDX                       0
-#define SMUIO_GFX_MISC_CNTL__PWR_GFXOFF_STATUS_MASK          0x00000006L
-#define SMUIO_GFX_MISC_CNTL__PWR_GFXOFF_STATUS__SHIFT        0x1
+#define smnMP1_FIRMWARE_FLAGS                                0x3010024
 
 int smu_v12_0_send_msg_without_waiting(struct smu_context *smu,
 					      uint16_t msg)
@@ -158,10 +160,10 @@ int smu_v12_0_check_fw_version(struct smu_context *smu)
 	 * Considering above, we just leave user a warning message instead
 	 * of halt driver loading.
 	 */
-	if (if_version != smu->smc_if_version) {
+	if (if_version != smu->smc_driver_if_version) {
 		pr_info("smu driver if version = 0x%08x, smu fw if version = 0x%08x, "
 			"smu fw version = 0x%08x (%d.%d.%d)\n",
-			smu->smc_if_version, if_version,
+			smu->smc_driver_if_version, if_version,
 			smu_version, smu_major, smu_minor, smu_debug);
 		pr_warn("SMU driver if version not matched\n");
 	}
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c
index 868e2d5f6e62..85e5b1ed22c2 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c
@@ -2780,7 +2780,7 @@ static int ci_update_dpm_settings(struct pp_hwmgr *hwmgr,
 
 	if (setting->bupdate_sclk) {
 		if (!data->sclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_FreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_FreezeLevel, NULL);
 		for (i = 0; i < smu_data->smc_state_table.GraphicsDpmLevelCount; i++) {
 			if (levels[i].ActivityLevel !=
 				cpu_to_be16(setting->sclk_activity)) {
@@ -2810,12 +2810,12 @@ static int ci_update_dpm_settings(struct pp_hwmgr *hwmgr,
 			}
 		}
 		if (!data->sclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_UnfreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_UnfreezeLevel, NULL);
 	}
 
 	if (setting->bupdate_mclk) {
 		if (!data->mclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_FreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_FreezeLevel, NULL);
 		for (i = 0; i < smu_data->smc_state_table.MemoryDpmLevelCount; i++) {
 			if (mclk_levels[i].ActivityLevel !=
 				cpu_to_be16(setting->mclk_activity)) {
@@ -2845,7 +2845,7 @@ static int ci_update_dpm_settings(struct pp_hwmgr *hwmgr,
 			}
 		}
 		if (!data->mclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_UnfreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_UnfreezeLevel, NULL);
 	}
 	return 0;
 }
@@ -2881,8 +2881,9 @@ static int ci_update_uvd_smc_table(struct pp_hwmgr *hwmgr)
 		if (hwmgr->dpm_level & profile_mode_mask || !PP_CAP(PHM_PlatformCaps_UVDDPM))
 			break;
 	}
-	ci_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_UVDDPM_SetEnabledMask,
-				data->dpm_level_enable_mask.uvd_dpm_enable_mask);
+	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_UVDDPM_SetEnabledMask,
+				data->dpm_level_enable_mask.uvd_dpm_enable_mask,
+				NULL);
 
 	return 0;
 }
@@ -2912,8 +2913,9 @@ static int ci_update_vce_smc_table(struct pp_hwmgr *hwmgr)
 		if (hwmgr->dpm_level & profile_mode_mask || !PP_CAP(PHM_PlatformCaps_VCEDPM))
 			break;
 	}
-	ci_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_VCEDPM_SetEnabledMask,
-				data->dpm_level_enable_mask.vce_dpm_enable_mask);
+	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_VCEDPM_SetEnabledMask,
+				data->dpm_level_enable_mask.vce_dpm_enable_mask,
+				NULL);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c
index 32ebb383c456..ecb9ee46d6b3 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c
@@ -137,9 +137,7 @@ static int fiji_start_smu_in_protection_mode(struct pp_hwmgr *hwmgr)
 	PHM_WAIT_VFPF_INDIRECT_FIELD(hwmgr, SMC_IND, RCU_UC_EVENTS,
 			INTERRUPTS_ENABLED, 1);
 
-	cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, 0x20000);
-	cgs_write_register(hwmgr->device, mmSMC_MESSAGE_0, PPSMC_MSG_Test);
-	PHM_WAIT_FIELD_UNEQUAL(hwmgr, SMC_RESP_0, SMC_RESP, 0);
+	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_Test, 0x20000, NULL);
 
 	/* Wait for done bit to be set */
 	PHM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL(hwmgr, SMC_IND,
@@ -203,8 +201,9 @@ static int fiji_start_avfs_btc(struct pp_hwmgr *hwmgr)
 	struct smu7_smumgr *smu_data = (struct smu7_smumgr *)(hwmgr->smu_backend);
 
 	if (0 != smu_data->avfs_btc_param) {
-		if (0 != smu7_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_PerformBtc, smu_data->avfs_btc_param)) {
+		if (0 != smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_PerformBtc, smu_data->avfs_btc_param,
+				NULL)) {
 			pr_info("[AVFS][Fiji_PerformBtc] PerformBTC SMU msg failed");
 			result = -EINVAL;
 		}
@@ -1913,7 +1912,8 @@ static int fiji_setup_dpm_led_config(struct pp_hwmgr *hwmgr)
 	if (mask)
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 						    PPSMC_MSG_LedConfig,
-						    mask);
+						    mask,
+						    NULL);
 	return 0;
 }
 
@@ -2220,14 +2220,16 @@ static int fiji_thermal_setup_fan_table(struct pp_hwmgr *hwmgr)
 		res = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetFanMinPwm,
 				hwmgr->thermal_controller.
-				advanceFanControlParameters.ucMinimumPWMLimit);
+				advanceFanControlParameters.ucMinimumPWMLimit,
+				NULL);
 
 	if (!res && hwmgr->thermal_controller.
 			advanceFanControlParameters.ulMinFanSCLKAcousticLimit)
 		res = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetFanSclkTarget,
 				hwmgr->thermal_controller.
-				advanceFanControlParameters.ulMinFanSCLKAcousticLimit);
+				advanceFanControlParameters.ulMinFanSCLKAcousticLimit,
+				NULL);
 
 	if (res)
 		phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
@@ -2242,7 +2244,7 @@ static int fiji_thermal_avfs_enable(struct pp_hwmgr *hwmgr)
 	if (!hwmgr->avfs_supported)
 		return 0;
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableAvfs);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableAvfs, NULL);
 
 	return 0;
 }
@@ -2390,7 +2392,8 @@ static int fiji_update_uvd_smc_table(struct pp_hwmgr *hwmgr)
 			PHM_PlatformCaps_StablePState))
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_UVDDPM_SetEnabledMask,
-				(uint32_t)(1 << smu_data->smc_state_table.UvdBootLevel));
+				(uint32_t)(1 << smu_data->smc_state_table.UvdBootLevel),
+				NULL);
 	return 0;
 }
 
@@ -2422,7 +2425,8 @@ static int fiji_update_vce_smc_table(struct pp_hwmgr *hwmgr)
 	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_StablePState))
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_VCEDPM_SetEnabledMask,
-				(uint32_t)1 << smu_data->smc_state_table.VceBootLevel);
+				(uint32_t)1 << smu_data->smc_state_table.VceBootLevel,
+				NULL);
 	return 0;
 }
 
@@ -2569,7 +2573,7 @@ static int fiji_update_dpm_settings(struct pp_hwmgr *hwmgr,
 
 	if (setting->bupdate_sclk) {
 		if (!data->sclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_FreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_FreezeLevel, NULL);
 		for (i = 0; i < smu_data->smc_state_table.GraphicsDpmLevelCount; i++) {
 			if (levels[i].ActivityLevel !=
 				cpu_to_be16(setting->sclk_activity)) {
@@ -2599,12 +2603,12 @@ static int fiji_update_dpm_settings(struct pp_hwmgr *hwmgr,
 			}
 		}
 		if (!data->sclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_UnfreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_UnfreezeLevel, NULL);
 	}
 
 	if (setting->bupdate_mclk) {
 		if (!data->mclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_FreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_FreezeLevel, NULL);
 		for (i = 0; i < smu_data->smc_state_table.MemoryDpmLevelCount; i++) {
 			if (mclk_levels[i].ActivityLevel !=
 				cpu_to_be16(setting->mclk_activity)) {
@@ -2634,7 +2638,7 @@ static int fiji_update_dpm_settings(struct pp_hwmgr *hwmgr,
 			}
 		}
 		if (!data->mclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_UnfreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_UnfreezeLevel, NULL);
 	}
 	return 0;
 }
@@ -2649,6 +2653,7 @@ const struct pp_smumgr_func fiji_smu_funcs = {
 	.request_smu_load_specific_fw = NULL,
 	.send_msg_to_smc = &smu7_send_msg_to_smc,
 	.send_msg_to_smc_with_parameter = &smu7_send_msg_to_smc_with_parameter,
+	.get_argument = smu7_get_argument,
 	.download_pptable_settings = NULL,
 	.upload_pptable_settings = NULL,
 	.update_smc_table = fiji_update_smc_table,
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c
index 732005c03a82..431ad2fd38df 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c
@@ -2669,6 +2669,7 @@ const struct pp_smumgr_func iceland_smu_funcs = {
 	.request_smu_load_specific_fw = &iceland_request_smu_load_specific_fw,
 	.send_msg_to_smc = &smu7_send_msg_to_smc,
 	.send_msg_to_smc_with_parameter = &smu7_send_msg_to_smc_with_parameter,
+	.get_argument = smu7_get_argument,
 	.download_pptable_settings = NULL,
 	.upload_pptable_settings = NULL,
 	.get_offsetof = iceland_get_offsetof,
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c
index 23c12018dbc1..c3d2e6dcf62a 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c
@@ -99,7 +99,8 @@ static int polaris10_perform_btc(struct pp_hwmgr *hwmgr)
 	struct smu7_smumgr *smu_data = (struct smu7_smumgr *)(hwmgr->smu_backend);
 
 	if (0 != smu_data->avfs_btc_param) {
-		if (0 != smu7_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_PerformBtc, smu_data->avfs_btc_param)) {
+		if (0 != smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_PerformBtc, smu_data->avfs_btc_param,
+					NULL)) {
 			pr_info("[AVFS][SmuPolaris10_PerformBtc] PerformBTC SMU msg failed");
 			result = -1;
 		}
@@ -2049,15 +2050,16 @@ int polaris10_thermal_avfs_enable(struct pp_hwmgr *hwmgr)
 		return 0;
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_SetGBDroopSettings, data->avfs_vdroop_override_setting);
+			PPSMC_MSG_SetGBDroopSettings, data->avfs_vdroop_override_setting,
+			NULL);
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableAvfs);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableAvfs, NULL);
 
 	/* Apply avfs cks-off voltages to avoid the overshoot
 	 * when switching to the highest sclk frequency
 	 */
 	if (data->apply_avfs_cks_off_voltage)
-		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ApplyAvfsCksOffVoltage);
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ApplyAvfsCksOffVoltage, NULL);
 
 	return 0;
 }
@@ -2158,14 +2160,16 @@ static int polaris10_thermal_setup_fan_table(struct pp_hwmgr *hwmgr)
 		res = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetFanMinPwm,
 				hwmgr->thermal_controller.
-				advanceFanControlParameters.ucMinimumPWMLimit);
+				advanceFanControlParameters.ucMinimumPWMLimit,
+				NULL);
 
 	if (!res && hwmgr->thermal_controller.
 			advanceFanControlParameters.ulMinFanSCLKAcousticLimit)
 		res = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetFanSclkTarget,
 				hwmgr->thermal_controller.
-				advanceFanControlParameters.ulMinFanSCLKAcousticLimit);
+				advanceFanControlParameters.ulMinFanSCLKAcousticLimit,
+				NULL);
 
 	if (res)
 		phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
@@ -2202,7 +2206,8 @@ static int polaris10_update_uvd_smc_table(struct pp_hwmgr *hwmgr)
 			PHM_PlatformCaps_StablePState))
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_UVDDPM_SetEnabledMask,
-				(uint32_t)(1 << smu_data->smc_state_table.UvdBootLevel));
+				(uint32_t)(1 << smu_data->smc_state_table.UvdBootLevel),
+				NULL);
 	return 0;
 }
 
@@ -2234,7 +2239,8 @@ static int polaris10_update_vce_smc_table(struct pp_hwmgr *hwmgr)
 	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_StablePState))
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_VCEDPM_SetEnabledMask,
-				(uint32_t)1 << smu_data->smc_state_table.VceBootLevel);
+				(uint32_t)1 << smu_data->smc_state_table.VceBootLevel,
+				NULL);
 	return 0;
 }
 
@@ -2485,7 +2491,7 @@ static int polaris10_update_dpm_settings(struct pp_hwmgr *hwmgr,
 
 	if (setting->bupdate_sclk) {
 		if (!data->sclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_FreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_FreezeLevel, NULL);
 		for (i = 0; i < smu_data->smc_state_table.GraphicsDpmLevelCount; i++) {
 			if (levels[i].ActivityLevel !=
 				cpu_to_be16(setting->sclk_activity)) {
@@ -2515,12 +2521,12 @@ static int polaris10_update_dpm_settings(struct pp_hwmgr *hwmgr,
 			}
 		}
 		if (!data->sclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_UnfreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_UnfreezeLevel, NULL);
 	}
 
 	if (setting->bupdate_mclk) {
 		if (!data->mclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_FreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_FreezeLevel, NULL);
 		for (i = 0; i < smu_data->smc_state_table.MemoryDpmLevelCount; i++) {
 			if (mclk_levels[i].ActivityLevel !=
 				cpu_to_be16(setting->mclk_activity)) {
@@ -2550,7 +2556,7 @@ static int polaris10_update_dpm_settings(struct pp_hwmgr *hwmgr,
 			}
 		}
 		if (!data->mclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_UnfreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_UnfreezeLevel, NULL);
 	}
 	return 0;
 }
@@ -2565,6 +2571,7 @@ const struct pp_smumgr_func polaris10_smu_funcs = {
 	.request_smu_load_specific_fw = NULL,
 	.send_msg_to_smc = smu7_send_msg_to_smc,
 	.send_msg_to_smc_with_parameter = smu7_send_msg_to_smc_with_parameter,
+	.get_argument = smu7_get_argument,
 	.download_pptable_settings = NULL,
 	.upload_pptable_settings = NULL,
 	.update_smc_table = polaris10_update_smc_table,
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/smu10_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/smu10_smumgr.c
index 2319400a3fcb..801ba9ca6094 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/smu10_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/smu10_smumgr.c
@@ -126,15 +126,18 @@ static int smu10_copy_table_from_smc(struct pp_hwmgr *hwmgr,
 			"Invalid SMU Table version!", return -EINVAL;);
 	PP_ASSERT_WITH_CODE(priv->smu_tables.entry[table_id].size != 0,
 			"Invalid SMU Table Length!", return -EINVAL;);
-	smu10_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr));
-	smu10_send_msg_to_smc_with_parameter(hwmgr,
+			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr));
-	smu10_send_msg_to_smc_with_parameter(hwmgr,
+			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_TransferTableSmu2Dram,
-			priv->smu_tables.entry[table_id].table_id);
+			priv->smu_tables.entry[table_id].table_id,
+			NULL);
 
 	/* flush hdp cache */
 	amdgpu_asic_flush_hdp(adev, NULL);
@@ -164,15 +167,18 @@ static int smu10_copy_table_to_smc(struct pp_hwmgr *hwmgr,
 
 	amdgpu_asic_flush_hdp(adev, NULL);
 
-	smu10_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr));
-	smu10_send_msg_to_smc_with_parameter(hwmgr,
+			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr));
-	smu10_send_msg_to_smc_with_parameter(hwmgr,
+			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_TransferTableDram2Smu,
-			priv->smu_tables.entry[table_id].table_id);
+			priv->smu_tables.entry[table_id].table_id,
+			NULL);
 
 	return 0;
 }
@@ -181,9 +187,9 @@ static int smu10_verify_smc_interface(struct pp_hwmgr *hwmgr)
 {
 	uint32_t smc_driver_if_version;
 
-	smu10_send_msg_to_smc(hwmgr,
-			PPSMC_MSG_GetDriverIfVersion);
-	smc_driver_if_version = smu10_read_arg_from_smc(hwmgr);
+	smum_send_msg_to_smc(hwmgr,
+			PPSMC_MSG_GetDriverIfVersion,
+			&smc_driver_if_version);
 
 	if ((smc_driver_if_version != SMU10_DRIVER_IF_VERSION) &&
 	    (smc_driver_if_version != SMU10_DRIVER_IF_VERSION + 1)) {
@@ -217,8 +223,7 @@ static int smu10_start_smu(struct pp_hwmgr *hwmgr)
 {
 	struct amdgpu_device *adev = hwmgr->adev;
 
-	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetSmuVersion);
-	hwmgr->smu_version = smu10_read_arg_from_smc(hwmgr);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetSmuVersion, &hwmgr->smu_version);
 	adev->pm.fw_version = hwmgr->smu_version >> 8;
 
 	if (adev->rev_id < 0x8 && adev->pdev->device != 0x15d8 &&
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c
index 3f51d545e8ff..aae25243eb10 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c
@@ -191,13 +191,6 @@ int smu7_send_msg_to_smc(struct pp_hwmgr *hwmgr, uint16_t msg)
 	return 0;
 }
 
-int smu7_send_msg_to_smc_without_waiting(struct pp_hwmgr *hwmgr, uint16_t msg)
-{
-	cgs_write_register(hwmgr->device, mmSMC_MESSAGE_0, msg);
-
-	return 0;
-}
-
 int smu7_send_msg_to_smc_with_parameter(struct pp_hwmgr *hwmgr, uint16_t msg, uint32_t parameter)
 {
 	PHM_WAIT_FIELD_UNEQUAL(hwmgr, SMC_RESP_0, SMC_RESP, 0);
@@ -207,25 +200,14 @@ int smu7_send_msg_to_smc_with_parameter(struct pp_hwmgr *hwmgr, uint16_t msg, ui
 	return smu7_send_msg_to_smc(hwmgr, msg);
 }
 
-int smu7_send_msg_to_smc_with_parameter_without_waiting(struct pp_hwmgr *hwmgr, uint16_t msg, uint32_t parameter)
+uint32_t smu7_get_argument(struct pp_hwmgr *hwmgr)
 {
-	cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, parameter);
-
-	return smu7_send_msg_to_smc_without_waiting(hwmgr, msg);
+	return cgs_read_register(hwmgr->device, mmSMC_MSG_ARG_0);
 }
 
 int smu7_send_msg_to_smc_offset(struct pp_hwmgr *hwmgr)
 {
-	cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, 0x20000);
-
-	cgs_write_register(hwmgr->device, mmSMC_MESSAGE_0, PPSMC_MSG_Test);
-
-	PHM_WAIT_FIELD_UNEQUAL(hwmgr, SMC_RESP_0, SMC_RESP, 0);
-
-	if (1 != PHM_READ_FIELD(hwmgr->device, SMC_RESP_0, SMC_RESP))
-		pr_info("Failed to send Message.\n");
-
-	return 0;
+	return smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_Test, 0x20000, NULL);
 }
 
 enum cgs_ucode_id smu7_convert_fw_type_to_cgs(uint32_t fw_type)
@@ -353,12 +335,14 @@ int smu7_request_smu_load_fw(struct pp_hwmgr *hwmgr)
 
 	if (hwmgr->chip_id > CHIP_TOPAZ) { /* add support for Topaz */
 		if (hwmgr->not_vf) {
-			smu7_send_msg_to_smc_with_parameter(hwmgr,
+			smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SMU_DRAM_ADDR_HI,
-						upper_32_bits(smu_data->smu_buffer.mc_addr));
-			smu7_send_msg_to_smc_with_parameter(hwmgr,
+						upper_32_bits(smu_data->smu_buffer.mc_addr),
+						NULL);
+			smum_send_msg_to_smc_with_parameter(hwmgr,
 						PPSMC_MSG_SMU_DRAM_ADDR_LO,
-						lower_32_bits(smu_data->smu_buffer.mc_addr));
+						lower_32_bits(smu_data->smu_buffer.mc_addr),
+						NULL);
 		}
 		fw_to_load = UCODE_ID_RLC_G_MASK
 			   + UCODE_ID_SDMA0_MASK
@@ -423,10 +407,16 @@ int smu7_request_smu_load_fw(struct pp_hwmgr *hwmgr)
 	}
 	memcpy_toio(smu_data->header_buffer.kaddr, smu_data->toc,
 		    sizeof(struct SMU_DRAMData_TOC));
-	smu7_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_DRV_DRAM_ADDR_HI, upper_32_bits(smu_data->header_buffer.mc_addr));
-	smu7_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_DRV_DRAM_ADDR_LO, lower_32_bits(smu_data->header_buffer.mc_addr));
-
-	smu7_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_LoadUcodes, fw_to_load);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
+			PPSMC_MSG_DRV_DRAM_ADDR_HI,
+			upper_32_bits(smu_data->header_buffer.mc_addr),
+			NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
+			PPSMC_MSG_DRV_DRAM_ADDR_LO,
+			lower_32_bits(smu_data->header_buffer.mc_addr),
+			NULL);
+
+	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_LoadUcodes, fw_to_load, NULL);
 
 	r = smu7_check_fw_load_finish(hwmgr, fw_to_load);
 	if (!r)
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.h b/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.h
index 01f0538fba6b..e7303dc8c260 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.h
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.h
@@ -60,11 +60,9 @@ int smu7_copy_bytes_to_smc(struct pp_hwmgr *hwmgr, uint32_t smc_start_address,
 int smu7_program_jump_on_start(struct pp_hwmgr *hwmgr);
 bool smu7_is_smc_ram_running(struct pp_hwmgr *hwmgr);
 int smu7_send_msg_to_smc(struct pp_hwmgr *hwmgr, uint16_t msg);
-int smu7_send_msg_to_smc_without_waiting(struct pp_hwmgr *hwmgr, uint16_t msg);
 int smu7_send_msg_to_smc_with_parameter(struct pp_hwmgr *hwmgr, uint16_t msg,
 						uint32_t parameter);
-int smu7_send_msg_to_smc_with_parameter_without_waiting(struct pp_hwmgr *hwmgr,
-						uint16_t msg, uint32_t parameter);
+uint32_t smu7_get_argument(struct pp_hwmgr *hwmgr);
 int smu7_send_msg_to_smc_offset(struct pp_hwmgr *hwmgr);
 
 enum cgs_ucode_id smu7_convert_fw_type_to_cgs(uint32_t fw_type);
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c
index 7dca04a89217..76d4f12ceedf 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c
@@ -610,18 +610,21 @@ static int smu8_download_pptable_settings(struct pp_hwmgr *hwmgr, void **table)
 
 	*table = (struct SMU8_Fusion_ClkTable *)smu8_smu->scratch_buffer[i].kaddr;
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetClkTableAddrHi,
-				upper_32_bits(smu8_smu->scratch_buffer[i].mc_addr));
+				upper_32_bits(smu8_smu->scratch_buffer[i].mc_addr),
+				NULL);
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetClkTableAddrLo,
-				lower_32_bits(smu8_smu->scratch_buffer[i].mc_addr));
+				lower_32_bits(smu8_smu->scratch_buffer[i].mc_addr),
+				NULL);
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_ExecuteJob,
-				smu8_smu->toc_entry_clock_table);
+	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_ExecuteJob,
+				smu8_smu->toc_entry_clock_table,
+				NULL);
 
-	smu8_send_msg_to_smc(hwmgr, PPSMC_MSG_ClkTableXferToDram);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ClkTableXferToDram, NULL);
 
 	return 0;
 }
@@ -637,18 +640,21 @@ static int smu8_upload_pptable_settings(struct pp_hwmgr *hwmgr)
 			break;
 	}
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetClkTableAddrHi,
-				upper_32_bits(smu8_smu->scratch_buffer[i].mc_addr));
+				upper_32_bits(smu8_smu->scratch_buffer[i].mc_addr),
+				NULL);
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetClkTableAddrLo,
-				lower_32_bits(smu8_smu->scratch_buffer[i].mc_addr));
+				lower_32_bits(smu8_smu->scratch_buffer[i].mc_addr),
+				NULL);
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_ExecuteJob,
-				smu8_smu->toc_entry_clock_table);
+	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_ExecuteJob,
+				smu8_smu->toc_entry_clock_table,
+				NULL);
 
-	smu8_send_msg_to_smc(hwmgr, PPSMC_MSG_ClkTableXferToSmu);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ClkTableXferToSmu, NULL);
 
 	return 0;
 }
@@ -671,25 +677,30 @@ static int smu8_request_smu_load_fw(struct pp_hwmgr *hwmgr)
 
 	smu8_write_smc_sram_dword(hwmgr, smc_address, 0, smc_address+4);
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DriverDramAddrHi,
-					upper_32_bits(smu8_smu->toc_buffer.mc_addr));
+					upper_32_bits(smu8_smu->toc_buffer.mc_addr),
+					NULL);
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_DriverDramAddrLo,
-					lower_32_bits(smu8_smu->toc_buffer.mc_addr));
+					lower_32_bits(smu8_smu->toc_buffer.mc_addr),
+					NULL);
 
-	smu8_send_msg_to_smc(hwmgr, PPSMC_MSG_InitJobs);
+	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_InitJobs, NULL);
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_ExecuteJob,
-					smu8_smu->toc_entry_aram);
-	smu8_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_ExecuteJob,
-				smu8_smu->toc_entry_power_profiling_index);
+					smu8_smu->toc_entry_aram,
+					NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_ExecuteJob,
+				smu8_smu->toc_entry_power_profiling_index,
+				NULL);
 
-	smu8_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_ExecuteJob,
-					smu8_smu->toc_entry_initialize_index);
+					smu8_smu->toc_entry_initialize_index,
+					NULL);
 
 	fw_to_check = UCODE_ID_RLC_G_MASK |
 			UCODE_ID_SDMA0_MASK |
@@ -860,11 +871,13 @@ static bool smu8_dpm_check_smu_features(struct pp_hwmgr *hwmgr,
 				unsigned long check_feature)
 {
 	int result;
-	unsigned long features;
+	uint32_t features;
 
-	result = smu8_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetFeatureStatus, 0);
+	result = smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_GetFeatureStatus,
+				0,
+				&features);
 	if (result == 0) {
-		features = smum_get_argument(hwmgr);
 		if (features & check_feature)
 			return true;
 	}
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c
index 4240aeec9000..b6fb48066841 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c
@@ -103,14 +103,6 @@ int smum_process_firmware_header(struct pp_hwmgr *hwmgr)
 	return 0;
 }
 
-uint32_t smum_get_argument(struct pp_hwmgr *hwmgr)
-{
-	if (NULL != hwmgr->smumgr_funcs->get_argument)
-		return hwmgr->smumgr_funcs->get_argument(hwmgr);
-
-	return 0;
-}
-
 uint32_t smum_get_mac_definition(struct pp_hwmgr *hwmgr, uint32_t value)
 {
 	if (NULL != hwmgr->smumgr_funcs->get_mac_definition)
@@ -135,22 +127,58 @@ int smum_upload_powerplay_table(struct pp_hwmgr *hwmgr)
 	return 0;
 }
 
-int smum_send_msg_to_smc(struct pp_hwmgr *hwmgr, uint16_t msg)
+int smum_send_msg_to_smc(struct pp_hwmgr *hwmgr, uint16_t msg, uint32_t *resp)
 {
-	if (hwmgr == NULL || hwmgr->smumgr_funcs->send_msg_to_smc == NULL)
+	int ret = 0;
+
+	if (hwmgr == NULL ||
+	    hwmgr->smumgr_funcs->send_msg_to_smc == NULL ||
+	    (resp && !hwmgr->smumgr_funcs->get_argument))
 		return -EINVAL;
 
-	return hwmgr->smumgr_funcs->send_msg_to_smc(hwmgr, msg);
+	mutex_lock(&hwmgr->msg_lock);
+
+	ret = hwmgr->smumgr_funcs->send_msg_to_smc(hwmgr, msg);
+	if (ret) {
+		mutex_unlock(&hwmgr->msg_lock);
+		return ret;
+	}
+
+	if (resp)
+		*resp = hwmgr->smumgr_funcs->get_argument(hwmgr);
+
+	mutex_unlock(&hwmgr->msg_lock);
+
+	return ret;
 }
 
 int smum_send_msg_to_smc_with_parameter(struct pp_hwmgr *hwmgr,
-					uint16_t msg, uint32_t parameter)
+					uint16_t msg,
+					uint32_t parameter,
+					uint32_t *resp)
 {
+	int ret = 0;
+
 	if (hwmgr == NULL ||
-		hwmgr->smumgr_funcs->send_msg_to_smc_with_parameter == NULL)
+	    hwmgr->smumgr_funcs->send_msg_to_smc_with_parameter == NULL ||
+	    (resp && !hwmgr->smumgr_funcs->get_argument))
 		return -EINVAL;
-	return hwmgr->smumgr_funcs->send_msg_to_smc_with_parameter(
+
+	mutex_lock(&hwmgr->msg_lock);
+
+	ret = hwmgr->smumgr_funcs->send_msg_to_smc_with_parameter(
 						hwmgr, msg, parameter);
+	if (ret) {
+		mutex_unlock(&hwmgr->msg_lock);
+		return ret;
+	}
+
+	if (resp)
+		*resp = hwmgr->smumgr_funcs->get_argument(hwmgr);
+
+	mutex_unlock(&hwmgr->msg_lock);
+
+	return ret;
 }
 
 int smum_init_smc_table(struct pp_hwmgr *hwmgr)
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c
index f19bac7ef7ba..398e7e3587de 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c
@@ -2702,7 +2702,8 @@ static int tonga_update_uvd_smc_table(struct pp_hwmgr *hwmgr)
 			PHM_PlatformCaps_StablePState))
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_UVDDPM_SetEnabledMask,
-				(uint32_t)(1 << smu_data->smc_state_table.UvdBootLevel));
+				(uint32_t)(1 << smu_data->smc_state_table.UvdBootLevel),
+				NULL);
 	return 0;
 }
 
@@ -2733,7 +2734,8 @@ static int tonga_update_vce_smc_table(struct pp_hwmgr *hwmgr)
 					PHM_PlatformCaps_StablePState))
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_VCEDPM_SetEnabledMask,
-				(uint32_t)1 << smu_data->smc_state_table.VceBootLevel);
+				(uint32_t)1 << smu_data->smc_state_table.VceBootLevel,
+				NULL);
 	return 0;
 }
 
@@ -3168,7 +3170,7 @@ static int tonga_update_dpm_settings(struct pp_hwmgr *hwmgr,
 
 	if (setting->bupdate_sclk) {
 		if (!data->sclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_FreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_FreezeLevel, NULL);
 		for (i = 0; i < smu_data->smc_state_table.GraphicsDpmLevelCount; i++) {
 			if (levels[i].ActivityLevel !=
 				cpu_to_be16(setting->sclk_activity)) {
@@ -3198,12 +3200,12 @@ static int tonga_update_dpm_settings(struct pp_hwmgr *hwmgr,
 			}
 		}
 		if (!data->sclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_UnfreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_SCLKDPM_UnfreezeLevel, NULL);
 	}
 
 	if (setting->bupdate_mclk) {
 		if (!data->mclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_FreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_FreezeLevel, NULL);
 		for (i = 0; i < smu_data->smc_state_table.MemoryDpmLevelCount; i++) {
 			if (mclk_levels[i].ActivityLevel !=
 				cpu_to_be16(setting->mclk_activity)) {
@@ -3233,7 +3235,7 @@ static int tonga_update_dpm_settings(struct pp_hwmgr *hwmgr,
 			}
 		}
 		if (!data->mclk_dpm_key_disabled)
-			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_UnfreezeLevel);
+			smum_send_msg_to_smc(hwmgr, PPSMC_MSG_MCLKDPM_UnfreezeLevel, NULL);
 	}
 	return 0;
 }
@@ -3248,6 +3250,7 @@ const struct pp_smumgr_func tonga_smu_funcs = {
 	.request_smu_load_specific_fw = NULL,
 	.send_msg_to_smc = &smu7_send_msg_to_smc,
 	.send_msg_to_smc_with_parameter = &smu7_send_msg_to_smc_with_parameter,
+	.get_argument = smu7_get_argument,
 	.download_pptable_settings = NULL,
 	.upload_pptable_settings = NULL,
 	.update_smc_table = tonga_update_smc_table,
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/vega10_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/vega10_smumgr.c
index 715564009089..1e222c5d91a4 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/vega10_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/vega10_smumgr.c
@@ -47,15 +47,18 @@ static int vega10_copy_table_from_smc(struct pp_hwmgr *hwmgr,
 			"Invalid SMU Table version!", return -EINVAL);
 	PP_ASSERT_WITH_CODE(priv->smu_tables.entry[table_id].size != 0,
 			"Invalid SMU Table Length!", return -EINVAL);
-	smu9_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr));
-	smu9_send_msg_to_smc_with_parameter(hwmgr,
+			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr));
-	smu9_send_msg_to_smc_with_parameter(hwmgr,
+			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_TransferTableSmu2Dram,
-			priv->smu_tables.entry[table_id].table_id);
+			priv->smu_tables.entry[table_id].table_id,
+			NULL);
 
 	/* flush hdp cache */
 	amdgpu_asic_flush_hdp(adev, NULL);
@@ -90,15 +93,18 @@ static int vega10_copy_table_to_smc(struct pp_hwmgr *hwmgr,
 
 	amdgpu_asic_flush_hdp(adev, NULL);
 
-	smu9_send_msg_to_smc_with_parameter(hwmgr,
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr));
-	smu9_send_msg_to_smc_with_parameter(hwmgr,
+			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr));
-	smu9_send_msg_to_smc_with_parameter(hwmgr,
+			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL);
+	smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_TransferTableDram2Smu,
-			priv->smu_tables.entry[table_id].table_id);
+			priv->smu_tables.entry[table_id].table_id,
+			NULL);
 
 	return 0;
 }
@@ -118,17 +124,21 @@ int vega10_enable_smc_features(struct pp_hwmgr *hwmgr,
 		return 0;
 
 	return smum_send_msg_to_smc_with_parameter(hwmgr,
-			msg, feature_mask);
+			msg, feature_mask, NULL);
 }
 
 int vega10_get_enabled_smc_features(struct pp_hwmgr *hwmgr,
 			    uint64_t *features_enabled)
 {
+	uint32_t enabled_features;
+
 	if (features_enabled == NULL)
 		return -EINVAL;
 
-	smu9_send_msg_to_smc(hwmgr, PPSMC_MSG_GetEnabledSmuFeatures);
-	*features_enabled = smu9_get_argument(hwmgr);
+	smum_send_msg_to_smc(hwmgr,
+			PPSMC_MSG_GetEnabledSmuFeatures,
+			&enabled_features);
+	*features_enabled = enabled_features;
 
 	return 0;
 }
@@ -150,12 +160,14 @@ static int vega10_set_tools_address(struct pp_hwmgr *hwmgr)
 	struct vega10_smumgr *priv = hwmgr->smu_backend;
 
 	if (priv->smu_tables.entry[TOOLSTABLE].mc_addr) {
-		smu9_send_msg_to_smc_with_parameter(hwmgr,
+		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetToolsDramAddrHigh,
-				upper_32_bits(priv->smu_tables.entry[TOOLSTABLE].mc_addr));
-		smu9_send_msg_to_smc_with_parameter(hwmgr,
+				upper_32_bits(priv->smu_tables.entry[TOOLSTABLE].mc_addr),
+				NULL);
+		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetToolsDramAddrLow,
-				lower_32_bits(priv->smu_tables.entry[TOOLSTABLE].mc_addr));
+				lower_32_bits(priv->smu_tables.entry[TOOLSTABLE].mc_addr),
+				NULL);
 	}
 	return 0;
 }
@@ -167,11 +179,11 @@ static int vega10_verify_smc_interface(struct pp_hwmgr *hwmgr)
 	uint32_t dev_id;
 	uint32_t rev_id;
 
-	PP_ASSERT_WITH_CODE(!smu9_send_msg_to_smc(hwmgr,
-			PPSMC_MSG_GetDriverIfVersion),
+	PP_ASSERT_WITH_CODE(!smum_send_msg_to_smc(hwmgr,
+			PPSMC_MSG_GetDriverIfVersion,
+			&smc_driver_if_version),
 			"Attempt to get SMC IF Version Number Failed!",
 			return -EINVAL);
-	smc_driver_if_version = smu9_get_argument(hwmgr);
 
 	dev_id = adev->pdev->device;
 	rev_id = adev->pdev->revision;
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/vega12_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/vega12_smumgr.c
index 275dbf65f1a0..f54df76537e4 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/vega12_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/vega12_smumgr.c
@@ -50,18 +50,21 @@ static int vega12_copy_table_from_smc(struct pp_hwmgr *hwmgr,
 			"Invalid SMU Table version!", return -EINVAL);
 	PP_ASSERT_WITH_CODE(priv->smu_tables.entry[table_id].size != 0,
 			"Invalid SMU Table Length!", return -EINVAL);
-	PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr)) == 0,
+			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL) == 0,
 			"[CopyTableFromSMC] Attempt to Set Dram Addr High Failed!", return -EINVAL);
-	PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr)) == 0,
+			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL) == 0,
 			"[CopyTableFromSMC] Attempt to Set Dram Addr Low Failed!",
 			return -EINVAL);
-	PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_TransferTableSmu2Dram,
-			table_id) == 0,
+			table_id,
+			NULL) == 0,
 			"[CopyTableFromSMC] Attempt to Transfer Table From SMU Failed!",
 			return -EINVAL);
 
@@ -98,19 +101,22 @@ static int vega12_copy_table_to_smc(struct pp_hwmgr *hwmgr,
 
 	amdgpu_asic_flush_hdp(adev, NULL);
 
-	PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr)) == 0,
+			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL) == 0,
 			"[CopyTableToSMC] Attempt to Set Dram Addr High Failed!",
 			return -EINVAL;);
-	PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr)) == 0,
+			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL) == 0,
 			"[CopyTableToSMC] Attempt to Set Dram Addr Low Failed!",
 			return -EINVAL);
-	PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_TransferTableDram2Smu,
-			table_id) == 0,
+			table_id,
+			NULL) == 0,
 			"[CopyTableToSMC] Attempt to Transfer Table To SMU Failed!",
 			return -EINVAL);
 
@@ -126,21 +132,21 @@ int vega12_enable_smc_features(struct pp_hwmgr *hwmgr,
 	smu_features_high = (uint32_t)((feature_mask & SMU_FEATURES_HIGH_MASK) >> SMU_FEATURES_HIGH_SHIFT);
 
 	if (enable) {
-		PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_EnableSmuFeaturesLow, smu_features_low) == 0,
+		PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_EnableSmuFeaturesLow, smu_features_low, NULL) == 0,
 				"[EnableDisableSMCFeatures] Attempt to enable SMU features Low failed!",
 				return -EINVAL);
-		PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_EnableSmuFeaturesHigh, smu_features_high) == 0,
+		PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_EnableSmuFeaturesHigh, smu_features_high, NULL) == 0,
 				"[EnableDisableSMCFeatures] Attempt to enable SMU features High failed!",
 				return -EINVAL);
 	} else {
-		PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_DisableSmuFeaturesLow, smu_features_low) == 0,
+		PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_DisableSmuFeaturesLow, smu_features_low, NULL) == 0,
 				"[EnableDisableSMCFeatures] Attempt to disable SMU features Low failed!",
 				return -EINVAL);
-		PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_DisableSmuFeaturesHigh, smu_features_high) == 0,
+		PP_ASSERT_WITH_CODE(smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_DisableSmuFeaturesHigh, smu_features_high, NULL) == 0,
 				"[EnableDisableSMCFeatures] Attempt to disable SMU features High failed!",
 				return -EINVAL);
 	}
@@ -156,17 +162,17 @@ int vega12_get_enabled_smc_features(struct pp_hwmgr *hwmgr,
 	if (features_enabled == NULL)
 		return -EINVAL;
 
-	PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc(hwmgr,
-			PPSMC_MSG_GetEnabledSmuFeaturesLow) == 0,
+	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc(hwmgr,
+			PPSMC_MSG_GetEnabledSmuFeaturesLow,
+			&smc_features_low) == 0,
 			"[GetEnabledSMCFeatures] Attempt to get SMU features Low failed!",
 			return -EINVAL);
-	smc_features_low = smu9_get_argument(hwmgr);
 
-	PP_ASSERT_WITH_CODE(smu9_send_msg_to_smc(hwmgr,
-			PPSMC_MSG_GetEnabledSmuFeaturesHigh) == 0,
+	PP_ASSERT_WITH_CODE(smum_send_msg_to_smc(hwmgr,
+			PPSMC_MSG_GetEnabledSmuFeaturesHigh,
+			&smc_features_high) == 0,
 			"[GetEnabledSMCFeatures] Attempt to get SMU features High failed!",
 			return -EINVAL);
-	smc_features_high = smu9_get_argument(hwmgr);
 
 	*features_enabled = ((((uint64_t)smc_features_low << SMU_FEATURES_LOW_SHIFT) & SMU_FEATURES_LOW_MASK) |
 			(((uint64_t)smc_features_high << SMU_FEATURES_HIGH_SHIFT) & SMU_FEATURES_HIGH_MASK));
@@ -192,12 +198,14 @@ static int vega12_set_tools_address(struct pp_hwmgr *hwmgr)
 			(struct vega12_smumgr *)(hwmgr->smu_backend);
 
 	if (priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr) {
-		if (!smu9_send_msg_to_smc_with_parameter(hwmgr,
+		if (!smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetToolsDramAddrHigh,
-				upper_32_bits(priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr)))
-			smu9_send_msg_to_smc_with_parameter(hwmgr,
+				upper_32_bits(priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr),
+				NULL))
+			smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetToolsDramAddrLow,
-					lower_32_bits(priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr));
+					lower_32_bits(priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr),
+					NULL);
 	}
 	return 0;
 }
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/vega20_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/vega20_smumgr.c
index 16aa171971d3..2fb97554134f 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/vega20_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/vega20_smumgr.c
@@ -175,18 +175,20 @@ static int vega20_copy_table_from_smc(struct pp_hwmgr *hwmgr,
 	PP_ASSERT_WITH_CODE(priv->smu_tables.entry[table_id].size != 0,
 			"Invalid SMU Table Length!", return -EINVAL);
 
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr))) == 0,
+			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL)) == 0,
 			"[CopyTableFromSMC] Attempt to Set Dram Addr High Failed!",
 			return ret);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr))) == 0,
+			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL)) == 0,
 			"[CopyTableFromSMC] Attempt to Set Dram Addr Low Failed!",
 			return ret);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_TransferTableSmu2Dram, table_id)) == 0,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
+			PPSMC_MSG_TransferTableSmu2Dram, table_id, NULL)) == 0,
 			"[CopyTableFromSMC] Attempt to Transfer Table From SMU Failed!",
 			return ret);
 
@@ -224,18 +226,20 @@ static int vega20_copy_table_to_smc(struct pp_hwmgr *hwmgr,
 
 	amdgpu_asic_flush_hdp(adev, NULL);
 
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr))) == 0,
+			upper_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL)) == 0,
 			"[CopyTableToSMC] Attempt to Set Dram Addr High Failed!",
 			return ret);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr))) == 0,
+			lower_32_bits(priv->smu_tables.entry[table_id].mc_addr),
+			NULL)) == 0,
 			"[CopyTableToSMC] Attempt to Set Dram Addr Low Failed!",
 			return ret);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_TransferTableDram2Smu, table_id)) == 0,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
+			PPSMC_MSG_TransferTableDram2Smu, table_id, NULL)) == 0,
 			"[CopyTableToSMC] Attempt to Transfer Table To SMU Failed!",
 			return ret);
 
@@ -255,18 +259,22 @@ int vega20_set_activity_monitor_coeff(struct pp_hwmgr *hwmgr,
 
 	amdgpu_asic_flush_hdp(adev, NULL);
 
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[TABLE_ACTIVITY_MONITOR_COEFF].mc_addr))) == 0,
+			upper_32_bits(priv->smu_tables.entry[TABLE_ACTIVITY_MONITOR_COEFF].mc_addr),
+			NULL)) == 0,
 			"[SetActivityMonitor] Attempt to Set Dram Addr High Failed!",
 			return ret);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[TABLE_ACTIVITY_MONITOR_COEFF].mc_addr))) == 0,
+			lower_32_bits(priv->smu_tables.entry[TABLE_ACTIVITY_MONITOR_COEFF].mc_addr),
+			NULL)) == 0,
 			"[SetActivityMonitor] Attempt to Set Dram Addr Low Failed!",
 			return ret);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_TransferTableDram2Smu, TABLE_ACTIVITY_MONITOR_COEFF | (workload_type << 16))) == 0,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
+			PPSMC_MSG_TransferTableDram2Smu,
+			TABLE_ACTIVITY_MONITOR_COEFF | (workload_type << 16),
+			NULL)) == 0,
 			"[SetActivityMonitor] Attempt to Transfer Table To SMU Failed!",
 			return ret);
 
@@ -281,19 +289,21 @@ int vega20_get_activity_monitor_coeff(struct pp_hwmgr *hwmgr,
 	struct amdgpu_device *adev = hwmgr->adev;
 	int ret = 0;
 
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[TABLE_ACTIVITY_MONITOR_COEFF].mc_addr))) == 0,
+			upper_32_bits(priv->smu_tables.entry[TABLE_ACTIVITY_MONITOR_COEFF].mc_addr),
+			NULL)) == 0,
 			"[GetActivityMonitor] Attempt to Set Dram Addr High Failed!",
 			return ret);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[TABLE_ACTIVITY_MONITOR_COEFF].mc_addr))) == 0,
+			lower_32_bits(priv->smu_tables.entry[TABLE_ACTIVITY_MONITOR_COEFF].mc_addr),
+			NULL)) == 0,
 			"[GetActivityMonitor] Attempt to Set Dram Addr Low Failed!",
 			return ret);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_TransferTableSmu2Dram,
-			TABLE_ACTIVITY_MONITOR_COEFF | (workload_type << 16))) == 0,
+			TABLE_ACTIVITY_MONITOR_COEFF | (workload_type << 16), NULL)) == 0,
 			"[GetActivityMonitor] Attempt to Transfer Table From SMU Failed!",
 			return ret);
 
@@ -316,21 +326,21 @@ int vega20_enable_smc_features(struct pp_hwmgr *hwmgr,
 	smu_features_high = (uint32_t)((feature_mask & SMU_FEATURES_HIGH_MASK) >> SMU_FEATURES_HIGH_SHIFT);
 
 	if (enable) {
-		PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_EnableSmuFeaturesLow, smu_features_low)) == 0,
+		PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_EnableSmuFeaturesLow, smu_features_low, NULL)) == 0,
 				"[EnableDisableSMCFeatures] Attempt to enable SMU features Low failed!",
 				return ret);
-		PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_EnableSmuFeaturesHigh, smu_features_high)) == 0,
+		PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_EnableSmuFeaturesHigh, smu_features_high, NULL)) == 0,
 				"[EnableDisableSMCFeatures] Attempt to enable SMU features High failed!",
 				return ret);
 	} else {
-		PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_DisableSmuFeaturesLow, smu_features_low)) == 0,
+		PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_DisableSmuFeaturesLow, smu_features_low, NULL)) == 0,
 				"[EnableDisableSMCFeatures] Attempt to disable SMU features Low failed!",
 				return ret);
-		PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
-				PPSMC_MSG_DisableSmuFeaturesHigh, smu_features_high)) == 0,
+		PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
+				PPSMC_MSG_DisableSmuFeaturesHigh, smu_features_high, NULL)) == 0,
 				"[EnableDisableSMCFeatures] Attempt to disable SMU features High failed!",
 				return ret);
 	}
@@ -347,16 +357,16 @@ int vega20_get_enabled_smc_features(struct pp_hwmgr *hwmgr,
 	if (features_enabled == NULL)
 		return -EINVAL;
 
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc(hwmgr,
-			PPSMC_MSG_GetEnabledSmuFeaturesLow)) == 0,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr,
+			PPSMC_MSG_GetEnabledSmuFeaturesLow,
+			&smc_features_low)) == 0,
 			"[GetEnabledSMCFeatures] Attempt to get SMU features Low failed!",
 			return ret);
-	smc_features_low = vega20_get_argument(hwmgr);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc(hwmgr,
-			PPSMC_MSG_GetEnabledSmuFeaturesHigh)) == 0,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr,
+			PPSMC_MSG_GetEnabledSmuFeaturesHigh,
+			&smc_features_high)) == 0,
 			"[GetEnabledSMCFeatures] Attempt to get SMU features High failed!",
 			return ret);
-	smc_features_high = vega20_get_argument(hwmgr);
 
 	*features_enabled = ((((uint64_t)smc_features_low << SMU_FEATURES_LOW_SHIFT) & SMU_FEATURES_LOW_MASK) |
 			(((uint64_t)smc_features_high << SMU_FEATURES_HIGH_SHIFT) & SMU_FEATURES_HIGH_MASK));
@@ -371,13 +381,15 @@ static int vega20_set_tools_address(struct pp_hwmgr *hwmgr)
 	int ret = 0;
 
 	if (priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr) {
-		ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+		ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_SetToolsDramAddrHigh,
-				upper_32_bits(priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr));
+				upper_32_bits(priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr),
+				NULL);
 		if (!ret)
-			ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+			ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 					PPSMC_MSG_SetToolsDramAddrLow,
-					lower_32_bits(priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr));
+					lower_32_bits(priv->smu_tables.entry[TABLE_PMSTATUSLOG].mc_addr),
+					NULL);
 	}
 
 	return ret;
@@ -389,14 +401,16 @@ int vega20_set_pptable_driver_address(struct pp_hwmgr *hwmgr)
 			(struct vega20_smumgr *)(hwmgr->smu_backend);
 	int ret = 0;
 
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrHigh,
-			upper_32_bits(priv->smu_tables.entry[TABLE_PPTABLE].mc_addr))) == 0,
+			upper_32_bits(priv->smu_tables.entry[TABLE_PPTABLE].mc_addr),
+			NULL)) == 0,
 			"[SetPPtabeDriverAddress] Attempt to Set Dram Addr High Failed!",
 			return ret);
-	PP_ASSERT_WITH_CODE((ret = vega20_send_msg_to_smc_with_parameter(hwmgr,
+	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc_with_parameter(hwmgr,
 			PPSMC_MSG_SetDriverDramAddrLow,
-			lower_32_bits(priv->smu_tables.entry[TABLE_PPTABLE].mc_addr))) == 0,
+			lower_32_bits(priv->smu_tables.entry[TABLE_PPTABLE].mc_addr),
+			NULL)) == 0,
 			"[SetPPtabeDriverAddress] Attempt to Set Dram Addr Low Failed!",
 			return ret);
 
diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c
index b0e0d67cd54b..3da71a088b92 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c
@@ -356,7 +356,8 @@ static int vegam_update_uvd_smc_table(struct pp_hwmgr *hwmgr)
 			PHM_PlatformCaps_StablePState))
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_UVDDPM_SetEnabledMask,
-				(uint32_t)(1 << smu_data->smc_state_table.UvdBootLevel));
+				(uint32_t)(1 << smu_data->smc_state_table.UvdBootLevel),
+				NULL);
 	return 0;
 }
 
@@ -388,7 +389,8 @@ static int vegam_update_vce_smc_table(struct pp_hwmgr *hwmgr)
 	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_StablePState))
 		smum_send_msg_to_smc_with_parameter(hwmgr,
 				PPSMC_MSG_VCEDPM_SetEnabledMask,
-				(uint32_t)1 << smu_data->smc_state_table.VceBootLevel);
+				(uint32_t)1 << smu_data->smc_state_table.VceBootLevel,
+				NULL);
 	return 0;
 }
 
@@ -1906,7 +1908,8 @@ static int vegam_enable_reconfig_cus(struct pp_hwmgr *hwmgr)
 
 	smum_send_msg_to_smc_with_parameter(hwmgr,
 					    PPSMC_MSG_EnableModeSwitchRLCNotification,
-					    adev->gfx.cu_info.number);
+					    adev->gfx.cu_info.number,
+					    NULL);
 
 	return 0;
 }
@@ -2060,7 +2063,7 @@ static int vegam_init_smc_table(struct pp_hwmgr *hwmgr)
 		table->AcDcGpio = gpio_pin.uc_gpio_pin_bit_shift;
 		if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
 				PHM_PlatformCaps_AutomaticDCTransition) &&
-				!smum_send_msg_to_smc(hwmgr, PPSMC_MSG_UseNewGPIOScheme))
+				!smum_send_msg_to_smc(hwmgr, PPSMC_MSG_UseNewGPIOScheme, NULL))
 			phm_cap_set(hwmgr->platform_descriptor.platformCaps,
 					PHM_PlatformCaps_SMCtoPPLIBAcdcGpioScheme);
 	} else {
@@ -2250,10 +2253,12 @@ int vegam_thermal_avfs_enable(struct pp_hwmgr *hwmgr)
 	if (!hwmgr->avfs_supported)
 		return 0;
 
-	ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableAvfs);
+	ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_EnableAvfs, NULL);
 	if (!ret) {
 		if (data->apply_avfs_cks_off_voltage)
-			ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_ApplyAvfsCksOffVoltage);
+			ret = smum_send_msg_to_smc(hwmgr,
+					PPSMC_MSG_ApplyAvfsCksOffVoltage,
+					NULL);
 	}
 
 	return ret;
@@ -2279,6 +2284,7 @@ const struct pp_smumgr_func vegam_smu_funcs = {
 	.request_smu_load_specific_fw = NULL,
 	.send_msg_to_smc = smu7_send_msg_to_smc,
 	.send_msg_to_smc_with_parameter = smu7_send_msg_to_smc_with_parameter,
+	.get_argument = smu7_get_argument,
 	.process_firmware_header = vegam_process_firmware_header,
 	.is_dpm_running = vegam_is_dpm_running,
 	.get_mac_definition = vegam_get_mac_definition,
diff --git a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c
index 3f1044326dcb..61923530b2e4 100644
--- a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c
@@ -1796,7 +1796,7 @@ static int vega20_get_power_profile_mode(struct smu_context *smu, char *buf)
 			"PD_Data_error_rate_coeff"};
 	int result = 0;
 
-	if (!smu->pm_enabled || !buf)
+	if (!buf)
 		return -EINVAL;
 
 	size += sprintf(buf + size, "%16s %s %s %s %s %s %s %s %s %s %s\n",
@@ -1887,8 +1887,6 @@ static int vega20_set_power_profile_mode(struct smu_context *smu, long *input, u
 
 	smu->power_profile_mode = input[size];
 
-	if (!smu->pm_enabled)
-		return ret;
 	if (smu->power_profile_mode > PP_SMC_POWER_PROFILE_CUSTOM) {
 		pr_err("Invalid power profile mode %d\n", smu->power_profile_mode);
 		return -EINVAL;
diff --git a/drivers/gpu/drm/arc/arcpgu_drv.c b/drivers/gpu/drm/arc/arcpgu_drv.c
index d6a6692db0ac..c05d001163e0 100644
--- a/drivers/gpu/drm/arc/arcpgu_drv.c
+++ b/drivers/gpu/drm/arc/arcpgu_drv.c
@@ -137,10 +137,11 @@ static struct drm_info_list arcpgu_debugfs_list[] = {
 	{ "clocks", arcpgu_show_pxlclock, 0 },
 };
 
-static int arcpgu_debugfs_init(struct drm_minor *minor)
+static void arcpgu_debugfs_init(struct drm_minor *minor)
 {
-	return drm_debugfs_create_files(arcpgu_debugfs_list,
-		ARRAY_SIZE(arcpgu_debugfs_list), minor->debugfs_root, minor);
+	drm_debugfs_create_files(arcpgu_debugfs_list,
+				 ARRAY_SIZE(arcpgu_debugfs_list),
+				 minor->debugfs_root, minor);
 }
 #endif
 
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
index 442d4656150a..6b85d5f4caa8 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
@@ -14,6 +14,7 @@
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_irq.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_vblank.h>
 
@@ -260,17 +261,16 @@ static void komeda_kms_mode_config_init(struct komeda_kms_dev *kms,
 
 struct komeda_kms_dev *komeda_kms_attach(struct komeda_dev *mdev)
 {
-	struct komeda_kms_dev *kms = kzalloc(sizeof(*kms), GFP_KERNEL);
+	struct komeda_kms_dev *kms;
 	struct drm_device *drm;
 	int err;
 
-	if (!kms)
-		return ERR_PTR(-ENOMEM);
+	kms = devm_drm_dev_alloc(mdev->dev, &komeda_kms_driver,
+				 struct komeda_kms_dev, base);
+	if (IS_ERR(kms))
+		return kms;
 
 	drm = &kms->base;
-	err = drm_dev_init(drm, &komeda_kms_driver, mdev->dev);
-	if (err)
-		goto free_kms;
 
 	drm->dev_private = mdev;
 
@@ -327,9 +327,6 @@ struct komeda_kms_dev *komeda_kms_attach(struct komeda_dev *mdev)
 	drm_mode_config_cleanup(drm);
 	komeda_kms_cleanup_private_objs(kms);
 	drm->dev_private = NULL;
-	drm_dev_put(drm);
-free_kms:
-	kfree(kms);
 	return ERR_PTR(err);
 }
 
@@ -346,5 +343,4 @@ void komeda_kms_detach(struct komeda_kms_dev *kms)
 	drm_mode_config_cleanup(drm);
 	komeda_kms_cleanup_private_objs(kms);
 	drm->dev_private = NULL;
-	drm_dev_put(drm);
 }
diff --git a/drivers/gpu/drm/arm/hdlcd_drv.c b/drivers/gpu/drm/arm/hdlcd_drv.c
index 2e053815b54a..194419f47c5e 100644
--- a/drivers/gpu/drm/arm/hdlcd_drv.c
+++ b/drivers/gpu/drm/arm/hdlcd_drv.c
@@ -224,10 +224,11 @@ static struct drm_info_list hdlcd_debugfs_list[] = {
 	{ "clocks", hdlcd_show_pxlclock, 0 },
 };
 
-static int hdlcd_debugfs_init(struct drm_minor *minor)
+static void hdlcd_debugfs_init(struct drm_minor *minor)
 {
-	return drm_debugfs_create_files(hdlcd_debugfs_list,
-		ARRAY_SIZE(hdlcd_debugfs_list),	minor->debugfs_root, minor);
+	drm_debugfs_create_files(hdlcd_debugfs_list,
+				 ARRAY_SIZE(hdlcd_debugfs_list),
+				 minor->debugfs_root, minor);
 }
 #endif
 
diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c
index 37d92a06318e..def8c9ffafca 100644
--- a/drivers/gpu/drm/arm/malidp_drv.c
+++ b/drivers/gpu/drm/arm/malidp_drv.c
@@ -548,7 +548,7 @@ static const struct file_operations malidp_debugfs_fops = {
 	.release = single_release,
 };
 
-static int malidp_debugfs_init(struct drm_minor *minor)
+static void malidp_debugfs_init(struct drm_minor *minor)
 {
 	struct malidp_drm *malidp = minor->dev->dev_private;
 
@@ -557,7 +557,6 @@ static int malidp_debugfs_init(struct drm_minor *minor)
 	spin_lock_init(&malidp->errors_lock);
 	debugfs_create_file("debug", S_IRUGO | S_IWUSR, minor->debugfs_root,
 			    minor->dev, &malidp_debugfs_fops);
-	return 0;
 }
 
 #endif //CONFIG_DEBUG_FS
diff --git a/drivers/gpu/drm/armada/armada_drv.c b/drivers/gpu/drm/armada/armada_drv.c
index 197dca3fc84c..5fc25c3f445c 100644
--- a/drivers/gpu/drm/armada/armada_drv.c
+++ b/drivers/gpu/drm/armada/armada_drv.c
@@ -12,6 +12,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_ioctl.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_prime.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_fb_helper.h>
@@ -103,6 +104,7 @@ static int armada_drm_bind(struct device *dev)
 		kfree(priv);
 		return ret;
 	}
+	drmm_add_final_kfree(&priv->drm, priv);
 
 	/* Remove early framebuffers */
 	ret = drm_fb_helper_remove_conflicting_framebuffers(NULL,
@@ -311,7 +313,7 @@ static void __exit armada_drm_exit(void)
 }
 module_exit(armada_drm_exit);
 
-MODULE_AUTHOR("Russell King <rmk+kernel@arm.linux.org.uk>");
+MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
 MODULE_DESCRIPTION("Armada DRM Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:armada-drm");
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index a10358bb61ec..e7ca95827ae8 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -5,6 +5,7 @@
 #include <drm/drm_simple_kms_helper.h>
 
 struct aspeed_gfx {
+	struct drm_device		drm;
 	void __iomem			*base;
 	struct clk			*clk;
 	struct reset_control		*rst;
@@ -12,8 +13,8 @@ struct aspeed_gfx {
 
 	struct drm_simple_display_pipe	pipe;
 	struct drm_connector		connector;
-	struct drm_fbdev_cma		*fbdev;
 };
+#define to_aspeed_gfx(x) container_of(x, struct aspeed_gfx, drm)
 
 int aspeed_gfx_create_pipe(struct drm_device *drm);
 int aspeed_gfx_create_output(struct drm_device *drm);
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
index 2184b8be6fd4..e54686c31a90 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
@@ -231,7 +231,7 @@ static const uint32_t aspeed_gfx_formats[] = {
 
 int aspeed_gfx_create_pipe(struct drm_device *drm)
 {
-	struct aspeed_gfx *priv = drm->dev_private;
+	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
 
 	return drm_simple_display_pipe_init(drm, &priv->pipe, &aspeed_gfx_funcs,
 					    aspeed_gfx_formats,
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index ada2f6aca906..6b27242b9ee3 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -77,7 +77,7 @@ static void aspeed_gfx_setup_mode_config(struct drm_device *drm)
 static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
 {
 	struct drm_device *drm = data;
-	struct aspeed_gfx *priv = drm->dev_private;
+	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
 	u32 reg;
 
 	reg = readl(priv->base + CRT_CTRL1);
@@ -96,15 +96,10 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
 static int aspeed_gfx_load(struct drm_device *drm)
 {
 	struct platform_device *pdev = to_platform_device(drm->dev);
-	struct aspeed_gfx *priv;
+	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
 	struct resource *res;
 	int ret;
 
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-	drm->dev_private = priv;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->base = devm_ioremap_resource(drm->dev, res);
 	if (IS_ERR(priv->base))
@@ -187,8 +182,6 @@ static void aspeed_gfx_unload(struct drm_device *drm)
 {
 	drm_kms_helper_poll_fini(drm);
 	drm_mode_config_cleanup(drm);
-
-	drm->dev_private = NULL;
 }
 
 DEFINE_DRM_GEM_CMA_FOPS(fops);
@@ -216,27 +209,26 @@ static const struct of_device_id aspeed_gfx_match[] = {
 
 static int aspeed_gfx_probe(struct platform_device *pdev)
 {
-	struct drm_device *drm;
+	struct aspeed_gfx *priv;
 	int ret;
 
-	drm = drm_dev_alloc(&aspeed_gfx_driver, &pdev->dev);
-	if (IS_ERR(drm))
-		return PTR_ERR(drm);
+	priv = devm_drm_dev_alloc(&pdev->dev, &aspeed_gfx_driver,
+				  struct aspeed_gfx, drm);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
 
-	ret = aspeed_gfx_load(drm);
+	ret = aspeed_gfx_load(&priv->drm);
 	if (ret)
-		goto err_free;
+		return ret;
 
-	ret = drm_dev_register(drm, 0);
+	ret = drm_dev_register(&priv->drm, 0);
 	if (ret)
 		goto err_unload;
 
 	return 0;
 
 err_unload:
-	aspeed_gfx_unload(drm);
-err_free:
-	drm_dev_put(drm);
+	aspeed_gfx_unload(&priv->drm);
 
 	return ret;
 }
@@ -247,7 +239,6 @@ static int aspeed_gfx_remove(struct platform_device *pdev)
 
 	drm_dev_unregister(drm);
 	aspeed_gfx_unload(drm);
-	drm_dev_put(drm);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
index 67ee5fa10055..6759cb88415a 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
@@ -28,7 +28,7 @@ static const struct drm_connector_funcs aspeed_gfx_connector_funcs = {
 
 int aspeed_gfx_create_output(struct drm_device *drm)
 {
-	struct aspeed_gfx *priv = drm->dev_private;
+	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
 	int ret;
 
 	priv->connector.dpms = DRM_MODE_DPMS_OFF;
diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
index 30aa73a5d9b7..b7ba22dddcad 100644
--- a/drivers/gpu/drm/ast/ast_drv.c
+++ b/drivers/gpu/drm/ast/ast_drv.c
@@ -32,6 +32,7 @@
 
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_drv.h>
+#include <drm/drm_fb_helper.h>
 #include <drm/drm_gem_vram_helper.h>
 #include <drm/drm_probe_helper.h>
 
@@ -111,6 +112,8 @@ static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret)
 		goto err_ast_driver_unload;
 
+	drm_fbdev_generic_setup(dev, 32);
+
 	return 0;
 
 err_ast_driver_unload:
diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
index 18a0a4ce00f6..e5398e3dabe7 100644
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -30,7 +30,6 @@
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_helper.h>
 #include <drm/drm_gem.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_gem_vram_helper.h>
@@ -512,10 +511,6 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
 
 	drm_mode_config_reset(dev);
 
-	ret = drm_fbdev_generic_setup(dev, 32);
-	if (ret)
-		goto out_free;
-
 	return 0;
 out_free:
 	kfree(ast);
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index cdd6c46d6557..d2ab81f9c498 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -881,6 +881,17 @@ static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = {
 	.atomic_disable = ast_crtc_helper_atomic_disable,
 };
 
+static void ast_crtc_reset(struct drm_crtc *crtc)
+{
+	struct ast_crtc_state *ast_state =
+		kzalloc(sizeof(*ast_state), GFP_KERNEL);
+
+	if (crtc->state)
+		crtc->funcs->atomic_destroy_state(crtc, crtc->state);
+
+	__drm_atomic_helper_crtc_reset(crtc, &ast_state->base);
+}
+
 static void ast_crtc_destroy(struct drm_crtc *crtc)
 {
 	drm_crtc_cleanup(crtc);
@@ -919,7 +930,7 @@ static void ast_crtc_atomic_destroy_state(struct drm_crtc *crtc,
 }
 
 static const struct drm_crtc_funcs ast_crtc_funcs = {
-	.reset = drm_atomic_helper_crtc_reset,
+	.reset = ast_crtc_reset,
 	.set_config = drm_crtc_helper_set_config,
 	.gamma_set = drm_atomic_helper_legacy_gamma_set,
 	.destroy = ast_crtc_destroy,
@@ -1069,7 +1080,6 @@ static void ast_connector_destroy(struct drm_connector *connector)
 {
 	struct ast_connector *ast_connector = to_ast_connector(connector);
 	ast_i2c_destroy(ast_connector->i2c);
-	drm_connector_unregister(connector);
 	drm_connector_cleanup(connector);
 	kfree(connector);
 }
@@ -1112,8 +1122,6 @@ static int ast_connector_init(struct drm_device *dev)
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
 
-	drm_connector_register(connector);
-
 	connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
 	encoder = list_first_entry(&dev->mode_config.encoder_list, struct drm_encoder, head);
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
index e2019fe97fff..43bc709e3523 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
@@ -11,9 +11,10 @@
 #include <linux/media-bus-format.h>
 #include <linux/of_graph.h>
 
+#include <drm/drm_bridge.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_of.h>
-#include <drm/drm_bridge.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "atmel_hlcdc_dc.h"
 
@@ -22,10 +23,6 @@ struct atmel_hlcdc_rgb_output {
 	int bus_fmt;
 };
 
-static const struct drm_encoder_funcs atmel_hlcdc_panel_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static struct atmel_hlcdc_rgb_output *
 atmel_hlcdc_encoder_to_rgb_output(struct drm_encoder *encoder)
 {
@@ -98,9 +95,8 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, int endpoint)
 		return -EINVAL;
 	}
 
-	ret = drm_encoder_init(dev, &output->encoder,
-			       &atmel_hlcdc_panel_encoder_funcs,
-			       DRM_MODE_ENCODER_NONE, NULL);
+	ret = drm_simple_encoder_init(dev, &output->encoder,
+				      DRM_MODE_ENCODER_NONE);
 	if (ret)
 		return ret;
 
diff --git a/drivers/gpu/drm/bochs/bochs.h b/drivers/gpu/drm/bochs/bochs.h
index 917767173ee6..e5bd1d517a18 100644
--- a/drivers/gpu/drm/bochs/bochs.h
+++ b/drivers/gpu/drm/bochs/bochs.h
@@ -92,7 +92,6 @@ void bochs_mm_fini(struct bochs_device *bochs);
 
 /* bochs_kms.c */
 int bochs_kms_init(struct bochs_device *bochs);
-void bochs_kms_fini(struct bochs_device *bochs);
 
 /* bochs_fbdev.c */
 extern const struct drm_mode_config_funcs bochs_mode_funcs;
diff --git a/drivers/gpu/drm/bochs/bochs_drv.c b/drivers/gpu/drm/bochs/bochs_drv.c
index addb0568c1af..e18c51de1196 100644
--- a/drivers/gpu/drm/bochs/bochs_drv.c
+++ b/drivers/gpu/drm/bochs/bochs_drv.c
@@ -7,6 +7,7 @@
 
 #include <drm/drm_drv.h>
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_managed.h>
 
 #include "bochs.h"
 
@@ -21,10 +22,7 @@ static void bochs_unload(struct drm_device *dev)
 {
 	struct bochs_device *bochs = dev->dev_private;
 
-	bochs_kms_fini(bochs);
 	bochs_mm_fini(bochs);
-	kfree(bochs);
-	dev->dev_private = NULL;
 }
 
 static int bochs_load(struct drm_device *dev)
@@ -32,7 +30,7 @@ static int bochs_load(struct drm_device *dev)
 	struct bochs_device *bochs;
 	int ret;
 
-	bochs = kzalloc(sizeof(*bochs), GFP_KERNEL);
+	bochs = drmm_kzalloc(dev, sizeof(*bochs), GFP_KERNEL);
 	if (bochs == NULL)
 		return -ENOMEM;
 	dev->dev_private = bochs;
diff --git a/drivers/gpu/drm/bochs/bochs_kms.c b/drivers/gpu/drm/bochs/bochs_kms.c
index 8066d7d370d5..05d8373888e8 100644
--- a/drivers/gpu/drm/bochs/bochs_kms.c
+++ b/drivers/gpu/drm/bochs/bochs_kms.c
@@ -104,7 +104,6 @@ static void bochs_connector_init(struct drm_device *dev)
 			   DRM_MODE_CONNECTOR_VIRTUAL);
 	drm_connector_helper_add(connector,
 				 &bochs_connector_connector_helper_funcs);
-	drm_connector_register(connector);
 
 	bochs_hw_load_edid(bochs);
 	if (bochs->edid) {
@@ -134,7 +133,11 @@ const struct drm_mode_config_funcs bochs_mode_funcs = {
 
 int bochs_kms_init(struct bochs_device *bochs)
 {
-	drm_mode_config_init(bochs->dev);
+	int ret;
+
+	ret = drmm_mode_config_init(bochs->dev);
+	if (ret)
+		return ret;
 
 	bochs->dev->mode_config.max_width = 8192;
 	bochs->dev->mode_config.max_height = 8192;
@@ -160,12 +163,3 @@ int bochs_kms_init(struct bochs_device *bochs)
 
 	return 0;
 }
-
-void bochs_kms_fini(struct bochs_device *bochs)
-{
-	if (!bochs->dev->mode_config.num_connector)
-		return;
-
-	drm_atomic_helper_shutdown(bochs->dev);
-	drm_mode_config_cleanup(bochs->dev);
-}
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index aaed2347ace9..6ec945f837b8 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -58,6 +58,22 @@ config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
 	  to DP++. This is used with the i.MX6 imx-ldb
 	  driver. You are likely to say N here.
 
+config DRM_NWL_MIPI_DSI
+	tristate "Northwest Logic MIPI DSI Host controller"
+	depends on DRM
+	depends on COMMON_CLK
+	depends on OF && HAS_IOMEM
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	select GENERIC_PHY_MIPI_DPHY
+	select MFD_SYSCON
+	select MULTIPLEXER
+	select REGMAP_MMIO
+	help
+	  This enables the Northwest Logic MIPI DSI Host controller as
+	  for example found on NXP's i.MX8 Processors.
+
 config DRM_NXP_PTN3460
 	tristate "NXP PTN3460 DP/LVDS bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 6fb062b5b0f0..b04ac2dfa22c 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
 obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
 obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
 obj-$(CONFIG_DRM_TI_TPD12S015) += ti-tpd12s015.o
+obj-$(CONFIG_DRM_NWL_MIPI_DSI) += nwl-dsi.o
 
 obj-y += analogix/
 obj-y += synopsys/
diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig
index 47d4eb9e845d..f46a5e26b5dd 100644
--- a/drivers/gpu/drm/bridge/adv7511/Kconfig
+++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
@@ -6,7 +6,7 @@ config DRM_I2C_ADV7511
 	select REGMAP_I2C
 	select DRM_MIPI_DSI
 	help
-	  Support for the Analog Device ADV7511(W)/13/33/35 HDMI encoders.
+	  Support for the Analog Devices ADV7511(W)/13/33/35 HDMI encoders.
 
 config DRM_I2C_ADV7511_AUDIO
 	bool "ADV7511 HDMI Audio driver"
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
index a428185be2c1..f101dd2819b5 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
@@ -19,13 +19,15 @@ static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs,
 {
 	switch (fs) {
 	case 32000:
-		*n = 4096;
+	case 48000:
+	case 96000:
+	case 192000:
+		*n = fs * 128 / 1000;
 		break;
 	case 44100:
-		*n = 6272;
-		break;
-	case 48000:
-		*n = 6144;
+	case 88200:
+	case 176400:
+		*n = fs * 128 / 900;
 		break;
 	}
 
@@ -119,6 +121,9 @@ int adv7511_hdmi_hw_params(struct device *dev, void *data,
 		audio_source = ADV7511_AUDIO_SOURCE_I2S;
 		i2s_format = ADV7511_I2S_FORMAT_LEFT_J;
 		break;
+	case HDMI_SPDIF:
+		audio_source = ADV7511_AUDIO_SOURCE_SPDIF;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -175,11 +180,21 @@ static int audio_startup(struct device *dev, void *data)
 	/* use Audio infoframe updated info */
 	regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(1),
 				BIT(5), 0);
+	/* enable SPDIF receiver */
+	if (adv7511->audio_source == ADV7511_AUDIO_SOURCE_SPDIF)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,
+				   BIT(7), BIT(7));
+
 	return 0;
 }
 
 static void audio_shutdown(struct device *dev, void *data)
 {
+	struct adv7511 *adv7511 = dev_get_drvdata(dev);
+
+	if (adv7511->audio_source == ADV7511_AUDIO_SOURCE_SPDIF)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,
+				   BIT(7), 0);
 }
 
 static int adv7511_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
@@ -213,6 +228,7 @@ static const struct hdmi_codec_pdata codec_data = {
 	.ops = &adv7511_codec_ops,
 	.max_i2s_channels = 2,
 	.i2s = 1,
+	.spdif = 1,
 };
 
 int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511)
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
new file mode 100644
index 000000000000..b14d725bf609
--- /dev/null
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -0,0 +1,1213 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * i.MX8 NWL MIPI DSI host driver
+ *
+ * Copyright (C) 2017 NXP
+ * Copyright (C) 2020 Purism SPC
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/math64.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/sys_soc.h>
+#include <linux/time64.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#include <video/mipi_display.h>
+
+#include "nwl-dsi.h"
+
+#define DRV_NAME "nwl-dsi"
+
+/* i.MX8 NWL quirks */
+/* i.MX8MQ errata E11418 */
+#define E11418_HS_MODE_QUIRK	BIT(0)
+
+#define NWL_DSI_MIPI_FIFO_TIMEOUT msecs_to_jiffies(500)
+
+enum transfer_direction {
+	DSI_PACKET_SEND,
+	DSI_PACKET_RECEIVE,
+};
+
+#define NWL_DSI_ENDPOINT_LCDIF 0
+#define NWL_DSI_ENDPOINT_DCSS 1
+
+struct nwl_dsi_plat_clk_config {
+	const char *id;
+	struct clk *clk;
+	bool present;
+};
+
+struct nwl_dsi_transfer {
+	const struct mipi_dsi_msg *msg;
+	struct mipi_dsi_packet packet;
+	struct completion completed;
+
+	int status; /* status of transmission */
+	enum transfer_direction direction;
+	bool need_bta;
+	u8 cmd;
+	u16 rx_word_count;
+	size_t tx_len; /* in bytes */
+	size_t rx_len; /* in bytes */
+};
+
+struct nwl_dsi {
+	struct drm_bridge bridge;
+	struct mipi_dsi_host dsi_host;
+	struct drm_bridge *panel_bridge;
+	struct device *dev;
+	struct phy *phy;
+	union phy_configure_opts phy_cfg;
+	unsigned int quirks;
+
+	struct regmap *regmap;
+	int irq;
+	/*
+	 * The DSI host controller needs this reset sequence according to NWL:
+	 * 1. Deassert pclk reset to get access to DSI regs
+	 * 2. Configure DSI Host and DPHY and enable DPHY
+	 * 3. Deassert ESC and BYTE resets to allow host TX operations)
+	 * 4. Send DSI cmds to configure peripheral (handled by panel drv)
+	 * 5. Deassert DPI reset so DPI receives pixels and starts sending
+	 *    DSI data
+	 *
+	 * TODO: Since panel_bridges do their DSI setup in enable we
+	 * currently have 4. and 5. swapped.
+	 */
+	struct reset_control *rst_byte;
+	struct reset_control *rst_esc;
+	struct reset_control *rst_dpi;
+	struct reset_control *rst_pclk;
+	struct mux_control *mux;
+
+	/* DSI clocks */
+	struct clk *phy_ref_clk;
+	struct clk *rx_esc_clk;
+	struct clk *tx_esc_clk;
+	struct clk *core_clk;
+	/*
+	 * hardware bug: the i.MX8MQ needs this clock on during reset
+	 * even when not using LCDIF.
+	 */
+	struct clk *lcdif_clk;
+
+	/* dsi lanes */
+	u32 lanes;
+	enum mipi_dsi_pixel_format format;
+	struct drm_display_mode mode;
+	unsigned long dsi_mode_flags;
+	int error;
+
+	struct nwl_dsi_transfer *xfer;
+};
+
+static const struct regmap_config nwl_dsi_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = NWL_DSI_IRQ_MASK2,
+	.name = DRV_NAME,
+};
+
+static inline struct nwl_dsi *bridge_to_dsi(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct nwl_dsi, bridge);
+}
+
+static int nwl_dsi_clear_error(struct nwl_dsi *dsi)
+{
+	int ret = dsi->error;
+
+	dsi->error = 0;
+	return ret;
+}
+
+static void nwl_dsi_write(struct nwl_dsi *dsi, unsigned int reg, u32 val)
+{
+	int ret;
+
+	if (dsi->error)
+		return;
+
+	ret = regmap_write(dsi->regmap, reg, val);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev,
+			      "Failed to write NWL DSI reg 0x%x: %d\n", reg,
+			      ret);
+		dsi->error = ret;
+	}
+}
+
+static u32 nwl_dsi_read(struct nwl_dsi *dsi, u32 reg)
+{
+	unsigned int val;
+	int ret;
+
+	if (dsi->error)
+		return 0;
+
+	ret = regmap_read(dsi->regmap, reg, &val);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to read NWL DSI reg 0x%x: %d\n",
+			      reg, ret);
+		dsi->error = ret;
+	}
+	return val;
+}
+
+static int nwl_dsi_get_dpi_pixel_format(enum mipi_dsi_pixel_format format)
+{
+	switch (format) {
+	case MIPI_DSI_FMT_RGB565:
+		return NWL_DSI_PIXEL_FORMAT_16;
+	case MIPI_DSI_FMT_RGB666:
+		return NWL_DSI_PIXEL_FORMAT_18L;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		return NWL_DSI_PIXEL_FORMAT_18;
+	case MIPI_DSI_FMT_RGB888:
+		return NWL_DSI_PIXEL_FORMAT_24;
+	default:
+		return -EINVAL;
+	}
+}
+
+/*
+ * ps2bc - Picoseconds to byte clock cycles
+ */
+static u32 ps2bc(struct nwl_dsi *dsi, unsigned long long ps)
+{
+	u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+
+	return DIV64_U64_ROUND_UP(ps * dsi->mode.clock * bpp,
+				  dsi->lanes * 8 * NSEC_PER_SEC);
+}
+
+/*
+ * ui2bc - UI time periods to byte clock cycles
+ */
+static u32 ui2bc(struct nwl_dsi *dsi, unsigned long long ui)
+{
+	u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+
+	return DIV64_U64_ROUND_UP(ui * dsi->lanes,
+				  dsi->mode.clock * 1000 * bpp);
+}
+
+/*
+ * us2bc - micro seconds to lp clock cycles
+ */
+static u32 us2lp(u32 lp_clk_rate, unsigned long us)
+{
+	return DIV_ROUND_UP(us * lp_clk_rate, USEC_PER_SEC);
+}
+
+static int nwl_dsi_config_host(struct nwl_dsi *dsi)
+{
+	u32 cycles;
+	struct phy_configure_opts_mipi_dphy *cfg = &dsi->phy_cfg.mipi_dphy;
+
+	if (dsi->lanes < 1 || dsi->lanes > 4)
+		return -EINVAL;
+
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "DSI Lanes %d\n", dsi->lanes);
+	nwl_dsi_write(dsi, NWL_DSI_CFG_NUM_LANES, dsi->lanes - 1);
+
+	if (dsi->dsi_mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
+		nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x01);
+		nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x01);
+	} else {
+		nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x00);
+		nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x00);
+	}
+
+	/* values in byte clock cycles */
+	cycles = ui2bc(dsi, cfg->clk_pre);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_pre: 0x%x\n", cycles);
+	nwl_dsi_write(dsi, NWL_DSI_CFG_T_PRE, cycles);
+	cycles = ps2bc(dsi, cfg->lpx + cfg->clk_prepare + cfg->clk_zero);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap (pre): 0x%x\n", cycles);
+	cycles += ui2bc(dsi, cfg->clk_pre);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_post: 0x%x\n", cycles);
+	nwl_dsi_write(dsi, NWL_DSI_CFG_T_POST, cycles);
+	cycles = ps2bc(dsi, cfg->hs_exit);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap: 0x%x\n", cycles);
+	nwl_dsi_write(dsi, NWL_DSI_CFG_TX_GAP, cycles);
+
+	nwl_dsi_write(dsi, NWL_DSI_CFG_EXTRA_CMDS_AFTER_EOTP, 0x01);
+	nwl_dsi_write(dsi, NWL_DSI_CFG_HTX_TO_COUNT, 0x00);
+	nwl_dsi_write(dsi, NWL_DSI_CFG_LRX_H_TO_COUNT, 0x00);
+	nwl_dsi_write(dsi, NWL_DSI_CFG_BTA_H_TO_COUNT, 0x00);
+	/* In LP clock cycles */
+	cycles = us2lp(cfg->lp_clk_rate, cfg->wakeup);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_twakeup: 0x%x\n", cycles);
+	nwl_dsi_write(dsi, NWL_DSI_CFG_TWAKEUP, cycles);
+
+	return nwl_dsi_clear_error(dsi);
+}
+
+static int nwl_dsi_config_dpi(struct nwl_dsi *dsi)
+{
+	u32 mode;
+	int color_format;
+	bool burst_mode;
+	int hfront_porch, hback_porch, vfront_porch, vback_porch;
+	int hsync_len, vsync_len;
+
+	hfront_porch = dsi->mode.hsync_start - dsi->mode.hdisplay;
+	hsync_len = dsi->mode.hsync_end - dsi->mode.hsync_start;
+	hback_porch = dsi->mode.htotal - dsi->mode.hsync_end;
+
+	vfront_porch = dsi->mode.vsync_start - dsi->mode.vdisplay;
+	vsync_len = dsi->mode.vsync_end - dsi->mode.vsync_start;
+	vback_porch = dsi->mode.vtotal - dsi->mode.vsync_end;
+
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "hfront_porch = %d\n", hfront_porch);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "hback_porch = %d\n", hback_porch);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "hsync_len = %d\n", hsync_len);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "hdisplay = %d\n", dsi->mode.hdisplay);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "vfront_porch = %d\n", vfront_porch);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "vback_porch = %d\n", vback_porch);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "vsync_len = %d\n", vsync_len);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "vactive = %d\n", dsi->mode.vdisplay);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "clock = %d kHz\n", dsi->mode.clock);
+
+	color_format = nwl_dsi_get_dpi_pixel_format(dsi->format);
+	if (color_format < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Invalid color format 0x%x\n",
+			      dsi->format);
+		return color_format;
+	}
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "pixel fmt = %d\n", dsi->format);
+
+	nwl_dsi_write(dsi, NWL_DSI_INTERFACE_COLOR_CODING, NWL_DSI_DPI_24_BIT);
+	nwl_dsi_write(dsi, NWL_DSI_PIXEL_FORMAT, color_format);
+	/*
+	 * Adjusting input polarity based on the video mode results in
+	 * a black screen so always pick active low:
+	 */
+	nwl_dsi_write(dsi, NWL_DSI_VSYNC_POLARITY,
+		      NWL_DSI_VSYNC_POLARITY_ACTIVE_LOW);
+	nwl_dsi_write(dsi, NWL_DSI_HSYNC_POLARITY,
+		      NWL_DSI_HSYNC_POLARITY_ACTIVE_LOW);
+
+	burst_mode = (dsi->dsi_mode_flags & MIPI_DSI_MODE_VIDEO_BURST) &&
+		     !(dsi->dsi_mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE);
+
+	if (burst_mode) {
+		nwl_dsi_write(dsi, NWL_DSI_VIDEO_MODE, NWL_DSI_VM_BURST_MODE);
+		nwl_dsi_write(dsi, NWL_DSI_PIXEL_FIFO_SEND_LEVEL, 256);
+	} else {
+		mode = ((dsi->dsi_mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) ?
+				NWL_DSI_VM_BURST_MODE_WITH_SYNC_PULSES :
+				NWL_DSI_VM_NON_BURST_MODE_WITH_SYNC_EVENTS);
+		nwl_dsi_write(dsi, NWL_DSI_VIDEO_MODE, mode);
+		nwl_dsi_write(dsi, NWL_DSI_PIXEL_FIFO_SEND_LEVEL,
+			      dsi->mode.hdisplay);
+	}
+
+	nwl_dsi_write(dsi, NWL_DSI_HFP, hfront_porch);
+	nwl_dsi_write(dsi, NWL_DSI_HBP, hback_porch);
+	nwl_dsi_write(dsi, NWL_DSI_HSA, hsync_len);
+
+	nwl_dsi_write(dsi, NWL_DSI_ENABLE_MULT_PKTS, 0x0);
+	nwl_dsi_write(dsi, NWL_DSI_BLLP_MODE, 0x1);
+	nwl_dsi_write(dsi, NWL_DSI_USE_NULL_PKT_BLLP, 0x0);
+	nwl_dsi_write(dsi, NWL_DSI_VC, 0x0);
+
+	nwl_dsi_write(dsi, NWL_DSI_PIXEL_PAYLOAD_SIZE, dsi->mode.hdisplay);
+	nwl_dsi_write(dsi, NWL_DSI_VACTIVE, dsi->mode.vdisplay - 1);
+	nwl_dsi_write(dsi, NWL_DSI_VBP, vback_porch);
+	nwl_dsi_write(dsi, NWL_DSI_VFP, vfront_porch);
+
+	return nwl_dsi_clear_error(dsi);
+}
+
+static int nwl_dsi_init_interrupts(struct nwl_dsi *dsi)
+{
+	u32 irq_enable;
+
+	nwl_dsi_write(dsi, NWL_DSI_IRQ_MASK, 0xffffffff);
+	nwl_dsi_write(dsi, NWL_DSI_IRQ_MASK2, 0x7);
+
+	irq_enable = ~(u32)(NWL_DSI_TX_PKT_DONE_MASK |
+			    NWL_DSI_RX_PKT_HDR_RCVD_MASK |
+			    NWL_DSI_TX_FIFO_OVFLW_MASK |
+			    NWL_DSI_HS_TX_TIMEOUT_MASK);
+
+	nwl_dsi_write(dsi, NWL_DSI_IRQ_MASK, irq_enable);
+
+	return nwl_dsi_clear_error(dsi);
+}
+
+static int nwl_dsi_host_attach(struct mipi_dsi_host *dsi_host,
+			       struct mipi_dsi_device *device)
+{
+	struct nwl_dsi *dsi = container_of(dsi_host, struct nwl_dsi, dsi_host);
+	struct device *dev = dsi->dev;
+
+	DRM_DEV_INFO(dev, "lanes=%u, format=0x%x flags=0x%lx\n", device->lanes,
+		     device->format, device->mode_flags);
+
+	if (device->lanes < 1 || device->lanes > 4)
+		return -EINVAL;
+
+	dsi->lanes = device->lanes;
+	dsi->format = device->format;
+	dsi->dsi_mode_flags = device->mode_flags;
+
+	return 0;
+}
+
+static bool nwl_dsi_read_packet(struct nwl_dsi *dsi, u32 status)
+{
+	struct device *dev = dsi->dev;
+	struct nwl_dsi_transfer *xfer = dsi->xfer;
+	int err;
+	u8 *payload = xfer->msg->rx_buf;
+	u32 val;
+	u16 word_count;
+	u8 channel;
+	u8 data_type;
+
+	xfer->status = 0;
+
+	if (xfer->rx_word_count == 0) {
+		if (!(status & NWL_DSI_RX_PKT_HDR_RCVD))
+			return false;
+		/* Get the RX header and parse it */
+		val = nwl_dsi_read(dsi, NWL_DSI_RX_PKT_HEADER);
+		err = nwl_dsi_clear_error(dsi);
+		if (err)
+			xfer->status = err;
+		word_count = NWL_DSI_WC(val);
+		channel = NWL_DSI_RX_VC(val);
+		data_type = NWL_DSI_RX_DT(val);
+
+		if (channel != xfer->msg->channel) {
+			DRM_DEV_ERROR(dev,
+				      "[%02X] Channel mismatch (%u != %u)\n",
+				      xfer->cmd, channel, xfer->msg->channel);
+			xfer->status = -EINVAL;
+			return true;
+		}
+
+		switch (data_type) {
+		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
+			fallthrough;
+		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
+			if (xfer->msg->rx_len > 1) {
+				/* read second byte */
+				payload[1] = word_count >> 8;
+				++xfer->rx_len;
+			}
+			fallthrough;
+		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
+			fallthrough;
+		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
+			if (xfer->msg->rx_len > 0) {
+				/* read first byte */
+				payload[0] = word_count & 0xff;
+				++xfer->rx_len;
+			}
+			xfer->status = xfer->rx_len;
+			return true;
+		case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
+			word_count &= 0xff;
+			DRM_DEV_ERROR(dev, "[%02X] DSI error report: 0x%02x\n",
+				      xfer->cmd, word_count);
+			xfer->status = -EPROTO;
+			return true;
+		}
+
+		if (word_count > xfer->msg->rx_len) {
+			DRM_DEV_ERROR(dev,
+				"[%02X] Receive buffer too small: %zu (< %u)\n",
+				xfer->cmd, xfer->msg->rx_len, word_count);
+			xfer->status = -EINVAL;
+			return true;
+		}
+
+		xfer->rx_word_count = word_count;
+	} else {
+		/* Set word_count from previous header read */
+		word_count = xfer->rx_word_count;
+	}
+
+	/* If RX payload is not yet received, wait for it */
+	if (!(status & NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD))
+		return false;
+
+	/* Read the RX payload */
+	while (word_count >= 4) {
+		val = nwl_dsi_read(dsi, NWL_DSI_RX_PAYLOAD);
+		payload[0] = (val >> 0) & 0xff;
+		payload[1] = (val >> 8) & 0xff;
+		payload[2] = (val >> 16) & 0xff;
+		payload[3] = (val >> 24) & 0xff;
+		payload += 4;
+		xfer->rx_len += 4;
+		word_count -= 4;
+	}
+
+	if (word_count > 0) {
+		val = nwl_dsi_read(dsi, NWL_DSI_RX_PAYLOAD);
+		switch (word_count) {
+		case 3:
+			payload[2] = (val >> 16) & 0xff;
+			++xfer->rx_len;
+			fallthrough;
+		case 2:
+			payload[1] = (val >> 8) & 0xff;
+			++xfer->rx_len;
+			fallthrough;
+		case 1:
+			payload[0] = (val >> 0) & 0xff;
+			++xfer->rx_len;
+			break;
+		}
+	}
+
+	xfer->status = xfer->rx_len;
+	err = nwl_dsi_clear_error(dsi);
+	if (err)
+		xfer->status = err;
+
+	return true;
+}
+
+static void nwl_dsi_finish_transmission(struct nwl_dsi *dsi, u32 status)
+{
+	struct nwl_dsi_transfer *xfer = dsi->xfer;
+	bool end_packet = false;
+
+	if (!xfer)
+		return;
+
+	if (xfer->direction == DSI_PACKET_SEND &&
+	    status & NWL_DSI_TX_PKT_DONE) {
+		xfer->status = xfer->tx_len;
+		end_packet = true;
+	} else if (status & NWL_DSI_DPHY_DIRECTION &&
+		   ((status & (NWL_DSI_RX_PKT_HDR_RCVD |
+			       NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD)))) {
+		end_packet = nwl_dsi_read_packet(dsi, status);
+	}
+
+	if (end_packet)
+		complete(&xfer->completed);
+}
+
+static void nwl_dsi_begin_transmission(struct nwl_dsi *dsi)
+{
+	struct nwl_dsi_transfer *xfer = dsi->xfer;
+	struct mipi_dsi_packet *pkt = &xfer->packet;
+	const u8 *payload;
+	size_t length;
+	u16 word_count;
+	u8 hs_mode;
+	u32 val;
+	u32 hs_workaround = 0;
+
+	/* Send the payload, if any */
+	length = pkt->payload_length;
+	payload = pkt->payload;
+
+	while (length >= 4) {
+		val = *(u32 *)payload;
+		hs_workaround |= !(val & 0xFFFF00);
+		nwl_dsi_write(dsi, NWL_DSI_TX_PAYLOAD, val);
+		payload += 4;
+		length -= 4;
+	}
+	/* Send the rest of the payload */
+	val = 0;
+	switch (length) {
+	case 3:
+		val |= payload[2] << 16;
+		fallthrough;
+	case 2:
+		val |= payload[1] << 8;
+		hs_workaround |= !(val & 0xFFFF00);
+		fallthrough;
+	case 1:
+		val |= payload[0];
+		nwl_dsi_write(dsi, NWL_DSI_TX_PAYLOAD, val);
+		break;
+	}
+	xfer->tx_len = pkt->payload_length;
+
+	/*
+	 * Send the header
+	 * header[0] = Virtual Channel + Data Type
+	 * header[1] = Word Count LSB (LP) or first param (SP)
+	 * header[2] = Word Count MSB (LP) or second param (SP)
+	 */
+	word_count = pkt->header[1] | (pkt->header[2] << 8);
+	if (hs_workaround && (dsi->quirks & E11418_HS_MODE_QUIRK)) {
+		DRM_DEV_DEBUG_DRIVER(dsi->dev,
+				     "Using hs mode workaround for cmd 0x%x\n",
+				     xfer->cmd);
+		hs_mode = 1;
+	} else {
+		hs_mode = (xfer->msg->flags & MIPI_DSI_MSG_USE_LPM) ? 0 : 1;
+	}
+	val = NWL_DSI_WC(word_count) | NWL_DSI_TX_VC(xfer->msg->channel) |
+	      NWL_DSI_TX_DT(xfer->msg->type) | NWL_DSI_HS_SEL(hs_mode) |
+	      NWL_DSI_BTA_TX(xfer->need_bta);
+	nwl_dsi_write(dsi, NWL_DSI_PKT_CONTROL, val);
+
+	/* Send packet command */
+	nwl_dsi_write(dsi, NWL_DSI_SEND_PACKET, 0x1);
+}
+
+static ssize_t nwl_dsi_host_transfer(struct mipi_dsi_host *dsi_host,
+				     const struct mipi_dsi_msg *msg)
+{
+	struct nwl_dsi *dsi = container_of(dsi_host, struct nwl_dsi, dsi_host);
+	struct nwl_dsi_transfer xfer;
+	ssize_t ret = 0;
+
+	/* Create packet to be sent */
+	dsi->xfer = &xfer;
+	ret = mipi_dsi_create_packet(&xfer.packet, msg);
+	if (ret < 0) {
+		dsi->xfer = NULL;
+		return ret;
+	}
+
+	if ((msg->type & MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM ||
+	     msg->type & MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM ||
+	     msg->type & MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM ||
+	     msg->type & MIPI_DSI_DCS_READ) &&
+	    msg->rx_len > 0 && msg->rx_buf)
+		xfer.direction = DSI_PACKET_RECEIVE;
+	else
+		xfer.direction = DSI_PACKET_SEND;
+
+	xfer.need_bta = (xfer.direction == DSI_PACKET_RECEIVE);
+	xfer.need_bta |= (msg->flags & MIPI_DSI_MSG_REQ_ACK) ? 1 : 0;
+	xfer.msg = msg;
+	xfer.status = -ETIMEDOUT;
+	xfer.rx_word_count = 0;
+	xfer.rx_len = 0;
+	xfer.cmd = 0x00;
+	if (msg->tx_len > 0)
+		xfer.cmd = ((u8 *)(msg->tx_buf))[0];
+	init_completion(&xfer.completed);
+
+	ret = clk_prepare_enable(dsi->rx_esc_clk);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to enable rx_esc clk: %zd\n",
+			      ret);
+		return ret;
+	}
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "Enabled rx_esc clk @%lu Hz\n",
+			     clk_get_rate(dsi->rx_esc_clk));
+
+	/* Initiate the DSI packet transmision */
+	nwl_dsi_begin_transmission(dsi);
+
+	if (!wait_for_completion_timeout(&xfer.completed,
+					 NWL_DSI_MIPI_FIFO_TIMEOUT)) {
+		DRM_DEV_ERROR(dsi_host->dev, "[%02X] DSI transfer timed out\n",
+			      xfer.cmd);
+		ret = -ETIMEDOUT;
+	} else {
+		ret = xfer.status;
+	}
+
+	clk_disable_unprepare(dsi->rx_esc_clk);
+
+	return ret;
+}
+
+static const struct mipi_dsi_host_ops nwl_dsi_host_ops = {
+	.attach = nwl_dsi_host_attach,
+	.transfer = nwl_dsi_host_transfer,
+};
+
+static irqreturn_t nwl_dsi_irq_handler(int irq, void *data)
+{
+	u32 irq_status;
+	struct nwl_dsi *dsi = data;
+
+	irq_status = nwl_dsi_read(dsi, NWL_DSI_IRQ_STATUS);
+
+	if (irq_status & NWL_DSI_TX_FIFO_OVFLW)
+		DRM_DEV_ERROR_RATELIMITED(dsi->dev, "tx fifo overflow\n");
+
+	if (irq_status & NWL_DSI_HS_TX_TIMEOUT)
+		DRM_DEV_ERROR_RATELIMITED(dsi->dev, "HS tx timeout\n");
+
+	if (irq_status & NWL_DSI_TX_PKT_DONE ||
+	    irq_status & NWL_DSI_RX_PKT_HDR_RCVD ||
+	    irq_status & NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD)
+		nwl_dsi_finish_transmission(dsi, irq_status);
+
+	return IRQ_HANDLED;
+}
+
+static int nwl_dsi_enable(struct nwl_dsi *dsi)
+{
+	struct device *dev = dsi->dev;
+	union phy_configure_opts *phy_cfg = &dsi->phy_cfg;
+	int ret;
+
+	if (!dsi->lanes) {
+		DRM_DEV_ERROR(dev, "Need DSI lanes: %d\n", dsi->lanes);
+		return -EINVAL;
+	}
+
+	ret = phy_init(dsi->phy);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "Failed to init DSI phy: %d\n", ret);
+		return ret;
+	}
+
+	ret = phy_configure(dsi->phy, phy_cfg);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "Failed to configure DSI phy: %d\n", ret);
+		goto uninit_phy;
+	}
+
+	ret = clk_prepare_enable(dsi->tx_esc_clk);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to enable tx_esc clk: %d\n",
+			      ret);
+		goto uninit_phy;
+	}
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "Enabled tx_esc clk @%lu Hz\n",
+			     clk_get_rate(dsi->tx_esc_clk));
+
+	ret = nwl_dsi_config_host(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "Failed to set up DSI: %d", ret);
+		goto disable_clock;
+	}
+
+	ret = nwl_dsi_config_dpi(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "Failed to set up DPI: %d", ret);
+		goto disable_clock;
+	}
+
+	ret = phy_power_on(dsi->phy);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "Failed to power on DPHY (%d)\n", ret);
+		goto disable_clock;
+	}
+
+	ret = nwl_dsi_init_interrupts(dsi);
+	if (ret < 0)
+		goto power_off_phy;
+
+	return ret;
+
+power_off_phy:
+	phy_power_off(dsi->phy);
+disable_clock:
+	clk_disable_unprepare(dsi->tx_esc_clk);
+uninit_phy:
+	phy_exit(dsi->phy);
+
+	return ret;
+}
+
+static int nwl_dsi_disable(struct nwl_dsi *dsi)
+{
+	struct device *dev = dsi->dev;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "Disabling clocks and phy\n");
+
+	phy_power_off(dsi->phy);
+	phy_exit(dsi->phy);
+
+	/* Disabling the clock before the phy breaks enabling dsi again */
+	clk_disable_unprepare(dsi->tx_esc_clk);
+
+	return 0;
+}
+
+static void nwl_dsi_bridge_disable(struct drm_bridge *bridge)
+{
+	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
+	int ret;
+
+	nwl_dsi_disable(dsi);
+
+	ret = reset_control_assert(dsi->rst_dpi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to assert DPI: %d\n", ret);
+		return;
+	}
+	ret = reset_control_assert(dsi->rst_byte);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to assert ESC: %d\n", ret);
+		return;
+	}
+	ret = reset_control_assert(dsi->rst_esc);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to assert BYTE: %d\n", ret);
+		return;
+	}
+	ret = reset_control_assert(dsi->rst_pclk);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to assert PCLK: %d\n", ret);
+		return;
+	}
+
+	clk_disable_unprepare(dsi->core_clk);
+	clk_disable_unprepare(dsi->lcdif_clk);
+
+	pm_runtime_put(dsi->dev);
+}
+
+static int nwl_dsi_get_dphy_params(struct nwl_dsi *dsi,
+				   const struct drm_display_mode *mode,
+				   union phy_configure_opts *phy_opts)
+{
+	unsigned long rate;
+	int ret;
+
+	if (dsi->lanes < 1 || dsi->lanes > 4)
+		return -EINVAL;
+
+	/*
+	 * So far the DPHY spec minimal timings work for both mixel
+	 * dphy and nwl dsi host
+	 */
+	ret = phy_mipi_dphy_get_default_config(mode->clock * 1000,
+		mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes,
+		&phy_opts->mipi_dphy);
+	if (ret < 0)
+		return ret;
+
+	rate = clk_get_rate(dsi->tx_esc_clk);
+	DRM_DEV_DEBUG_DRIVER(dsi->dev, "LP clk is @%lu Hz\n", rate);
+	phy_opts->mipi_dphy.lp_clk_rate = rate;
+
+	return 0;
+}
+
+static bool nwl_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
+				      const struct drm_display_mode *mode,
+				      struct drm_display_mode *adjusted_mode)
+{
+	/* At least LCDIF + NWL needs active high sync */
+	adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+	adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+
+	return true;
+}
+
+static enum drm_mode_status
+nwl_dsi_bridge_mode_valid(struct drm_bridge *bridge,
+			  const struct drm_display_mode *mode)
+{
+	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
+	int bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+
+	if (mode->clock * bpp > 15000000 * dsi->lanes)
+		return MODE_CLOCK_HIGH;
+
+	if (mode->clock * bpp < 80000 * dsi->lanes)
+		return MODE_CLOCK_LOW;
+
+	return MODE_OK;
+}
+
+static void
+nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,
+			const struct drm_display_mode *mode,
+			const struct drm_display_mode *adjusted_mode)
+{
+	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
+	struct device *dev = dsi->dev;
+	union phy_configure_opts new_cfg;
+	unsigned long phy_ref_rate;
+	int ret;
+
+	ret = nwl_dsi_get_dphy_params(dsi, adjusted_mode, &new_cfg);
+	if (ret < 0)
+		return;
+
+	/*
+	 * If hs clock is unchanged, we're all good - all parameters are
+	 * derived from it atm.
+	 */
+	if (new_cfg.mipi_dphy.hs_clk_rate == dsi->phy_cfg.mipi_dphy.hs_clk_rate)
+		return;
+
+	phy_ref_rate = clk_get_rate(dsi->phy_ref_clk);
+	DRM_DEV_DEBUG_DRIVER(dev, "PHY at ref rate: %lu\n", phy_ref_rate);
+	/* Save the new desired phy config */
+	memcpy(&dsi->phy_cfg, &new_cfg, sizeof(new_cfg));
+
+	memcpy(&dsi->mode, adjusted_mode, sizeof(dsi->mode));
+	drm_mode_debug_printmodeline(adjusted_mode);
+}
+
+static void nwl_dsi_bridge_pre_enable(struct drm_bridge *bridge)
+{
+	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
+	int ret;
+
+	pm_runtime_get_sync(dsi->dev);
+
+	if (clk_prepare_enable(dsi->lcdif_clk) < 0)
+		return;
+	if (clk_prepare_enable(dsi->core_clk) < 0)
+		return;
+
+	/* Step 1 from DSI reset-out instructions */
+	ret = reset_control_deassert(dsi->rst_pclk);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to deassert PCLK: %d\n", ret);
+		return;
+	}
+
+	/* Step 2 from DSI reset-out instructions */
+	nwl_dsi_enable(dsi);
+
+	/* Step 3 from DSI reset-out instructions */
+	ret = reset_control_deassert(dsi->rst_esc);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to deassert ESC: %d\n", ret);
+		return;
+	}
+	ret = reset_control_deassert(dsi->rst_byte);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to deassert BYTE: %d\n", ret);
+		return;
+	}
+}
+
+static void nwl_dsi_bridge_enable(struct drm_bridge *bridge)
+{
+	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
+	int ret;
+
+	/* Step 5 from DSI reset-out instructions */
+	ret = reset_control_deassert(dsi->rst_dpi);
+	if (ret < 0)
+		DRM_DEV_ERROR(dsi->dev, "Failed to deassert DPI: %d\n", ret);
+}
+
+static int nwl_dsi_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
+{
+	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
+	struct drm_bridge *panel_bridge;
+	struct drm_panel *panel;
+	int ret;
+
+	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+		DRM_ERROR("Fix bridge driver to make connector optional!");
+		return -EINVAL;
+	}
+
+	ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 1, 0, &panel,
+					  &panel_bridge);
+	if (ret)
+		return ret;
+
+	if (panel) {
+		panel_bridge = drm_panel_bridge_add(panel);
+		if (IS_ERR(panel_bridge))
+			return PTR_ERR(panel_bridge);
+	}
+	dsi->panel_bridge = panel_bridge;
+
+	if (!dsi->panel_bridge)
+		return -EPROBE_DEFER;
+
+	return drm_bridge_attach(bridge->encoder, dsi->panel_bridge, bridge,
+				 flags);
+}
+
+static void nwl_dsi_bridge_detach(struct drm_bridge *bridge)
+{	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
+
+	drm_of_panel_bridge_remove(dsi->dev->of_node, 1, 0);
+}
+
+static const struct drm_bridge_funcs nwl_dsi_bridge_funcs = {
+	.pre_enable = nwl_dsi_bridge_pre_enable,
+	.enable     = nwl_dsi_bridge_enable,
+	.disable    = nwl_dsi_bridge_disable,
+	.mode_fixup = nwl_dsi_bridge_mode_fixup,
+	.mode_set   = nwl_dsi_bridge_mode_set,
+	.mode_valid = nwl_dsi_bridge_mode_valid,
+	.attach	    = nwl_dsi_bridge_attach,
+	.detach	    = nwl_dsi_bridge_detach,
+};
+
+static int nwl_dsi_parse_dt(struct nwl_dsi *dsi)
+{
+	struct platform_device *pdev = to_platform_device(dsi->dev);
+	struct clk *clk;
+	void __iomem *base;
+	int ret;
+
+	dsi->phy = devm_phy_get(dsi->dev, "dphy");
+	if (IS_ERR(dsi->phy)) {
+		ret = PTR_ERR(dsi->phy);
+		if (ret != -EPROBE_DEFER)
+			DRM_DEV_ERROR(dsi->dev, "Could not get PHY: %d\n", ret);
+		return ret;
+	}
+
+	clk = devm_clk_get(dsi->dev, "lcdif");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		DRM_DEV_ERROR(dsi->dev, "Failed to get lcdif clock: %d\n",
+			      ret);
+		return ret;
+	}
+	dsi->lcdif_clk = clk;
+
+	clk = devm_clk_get(dsi->dev, "core");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		DRM_DEV_ERROR(dsi->dev, "Failed to get core clock: %d\n",
+			      ret);
+		return ret;
+	}
+	dsi->core_clk = clk;
+
+	clk = devm_clk_get(dsi->dev, "phy_ref");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		DRM_DEV_ERROR(dsi->dev, "Failed to get phy_ref clock: %d\n",
+			      ret);
+		return ret;
+	}
+	dsi->phy_ref_clk = clk;
+
+	clk = devm_clk_get(dsi->dev, "rx_esc");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		DRM_DEV_ERROR(dsi->dev, "Failed to get rx_esc clock: %d\n",
+			      ret);
+		return ret;
+	}
+	dsi->rx_esc_clk = clk;
+
+	clk = devm_clk_get(dsi->dev, "tx_esc");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		DRM_DEV_ERROR(dsi->dev, "Failed to get tx_esc clock: %d\n",
+			      ret);
+		return ret;
+	}
+	dsi->tx_esc_clk = clk;
+
+	dsi->mux = devm_mux_control_get(dsi->dev, NULL);
+	if (IS_ERR(dsi->mux)) {
+		ret = PTR_ERR(dsi->mux);
+		if (ret != -EPROBE_DEFER)
+			DRM_DEV_ERROR(dsi->dev, "Failed to get mux: %d\n", ret);
+		return ret;
+	}
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	dsi->regmap =
+		devm_regmap_init_mmio(dsi->dev, base, &nwl_dsi_regmap_config);
+	if (IS_ERR(dsi->regmap)) {
+		ret = PTR_ERR(dsi->regmap);
+		DRM_DEV_ERROR(dsi->dev, "Failed to create NWL DSI regmap: %d\n",
+			      ret);
+		return ret;
+	}
+
+	dsi->irq = platform_get_irq(pdev, 0);
+	if (dsi->irq < 0) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to get device IRQ: %d\n",
+			      dsi->irq);
+		return dsi->irq;
+	}
+
+	dsi->rst_pclk = devm_reset_control_get_exclusive(dsi->dev, "pclk");
+	if (IS_ERR(dsi->rst_pclk)) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to get pclk reset: %ld\n",
+			      PTR_ERR(dsi->rst_pclk));
+		return PTR_ERR(dsi->rst_pclk);
+	}
+	dsi->rst_byte = devm_reset_control_get_exclusive(dsi->dev, "byte");
+	if (IS_ERR(dsi->rst_byte)) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to get byte reset: %ld\n",
+			      PTR_ERR(dsi->rst_byte));
+		return PTR_ERR(dsi->rst_byte);
+	}
+	dsi->rst_esc = devm_reset_control_get_exclusive(dsi->dev, "esc");
+	if (IS_ERR(dsi->rst_esc)) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to get esc reset: %ld\n",
+			      PTR_ERR(dsi->rst_esc));
+		return PTR_ERR(dsi->rst_esc);
+	}
+	dsi->rst_dpi = devm_reset_control_get_exclusive(dsi->dev, "dpi");
+	if (IS_ERR(dsi->rst_dpi)) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to get dpi reset: %ld\n",
+			      PTR_ERR(dsi->rst_dpi));
+		return PTR_ERR(dsi->rst_dpi);
+	}
+	return 0;
+}
+
+static int nwl_dsi_select_input(struct nwl_dsi *dsi)
+{
+	struct device_node *remote;
+	u32 use_dcss = 1;
+	int ret;
+
+	remote = of_graph_get_remote_node(dsi->dev->of_node, 0,
+					  NWL_DSI_ENDPOINT_LCDIF);
+	if (remote) {
+		use_dcss = 0;
+	} else {
+		remote = of_graph_get_remote_node(dsi->dev->of_node, 0,
+						  NWL_DSI_ENDPOINT_DCSS);
+		if (!remote) {
+			DRM_DEV_ERROR(dsi->dev,
+				      "No valid input endpoint found\n");
+			return -EINVAL;
+		}
+	}
+
+	DRM_DEV_INFO(dsi->dev, "Using %s as input source\n",
+		     (use_dcss) ? "DCSS" : "LCDIF");
+	ret = mux_control_try_select(dsi->mux, use_dcss);
+	if (ret < 0)
+		DRM_DEV_ERROR(dsi->dev, "Failed to select input: %d\n", ret);
+
+	of_node_put(remote);
+	return ret;
+}
+
+static int nwl_dsi_deselect_input(struct nwl_dsi *dsi)
+{
+	int ret;
+
+	ret = mux_control_deselect(dsi->mux);
+	if (ret < 0)
+		DRM_DEV_ERROR(dsi->dev, "Failed to deselect input: %d\n", ret);
+
+	return ret;
+}
+
+static const struct drm_bridge_timings nwl_dsi_timings = {
+	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
+};
+
+static const struct of_device_id nwl_dsi_dt_ids[] = {
+	{ .compatible = "fsl,imx8mq-nwl-dsi", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nwl_dsi_dt_ids);
+
+static const struct soc_device_attribute nwl_dsi_quirks_match[] = {
+	{ .soc_id = "i.MX8MQ", .revision = "2.0",
+	  .data = (void *)E11418_HS_MODE_QUIRK },
+	{ /* sentinel. */ },
+};
+
+static int nwl_dsi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct soc_device_attribute *attr;
+	struct nwl_dsi *dsi;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return -ENOMEM;
+
+	dsi->dev = dev;
+
+	ret = nwl_dsi_parse_dt(dsi);
+	if (ret)
+		return ret;
+
+	ret = devm_request_irq(dev, dsi->irq, nwl_dsi_irq_handler, 0,
+			       dev_name(dev), dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "Failed to request IRQ %d: %d\n", dsi->irq,
+			      ret);
+		return ret;
+	}
+
+	dsi->dsi_host.ops = &nwl_dsi_host_ops;
+	dsi->dsi_host.dev = dev;
+	ret = mipi_dsi_host_register(&dsi->dsi_host);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret);
+		return ret;
+	}
+
+	attr = soc_device_match(nwl_dsi_quirks_match);
+	if (attr)
+		dsi->quirks = (uintptr_t)attr->data;
+
+	dsi->bridge.driver_private = dsi;
+	dsi->bridge.funcs = &nwl_dsi_bridge_funcs;
+	dsi->bridge.of_node = dev->of_node;
+	dsi->bridge.timings = &nwl_dsi_timings;
+
+	dev_set_drvdata(dev, dsi);
+	pm_runtime_enable(dev);
+
+	ret = nwl_dsi_select_input(dsi);
+	if (ret < 0) {
+		mipi_dsi_host_unregister(&dsi->dsi_host);
+		return ret;
+	}
+
+	drm_bridge_add(&dsi->bridge);
+	return 0;
+}
+
+static int nwl_dsi_remove(struct platform_device *pdev)
+{
+	struct nwl_dsi *dsi = platform_get_drvdata(pdev);
+
+	nwl_dsi_deselect_input(dsi);
+	mipi_dsi_host_unregister(&dsi->dsi_host);
+	drm_bridge_remove(&dsi->bridge);
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver nwl_dsi_driver = {
+	.probe		= nwl_dsi_probe,
+	.remove		= nwl_dsi_remove,
+	.driver		= {
+		.of_match_table = nwl_dsi_dt_ids,
+		.name	= DRV_NAME,
+	},
+};
+
+module_platform_driver(nwl_dsi_driver);
+
+MODULE_AUTHOR("NXP Semiconductor");
+MODULE_AUTHOR("Purism SPC");
+MODULE_DESCRIPTION("Northwest Logic MIPI-DSI driver");
+MODULE_LICENSE("GPL"); /* GPLv2 or later */
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.h b/drivers/gpu/drm/bridge/nwl-dsi.h
new file mode 100644
index 000000000000..a247a8a11c7c
--- /dev/null
+++ b/drivers/gpu/drm/bridge/nwl-dsi.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * NWL MIPI DSI host driver
+ *
+ * Copyright (C) 2017 NXP
+ * Copyright (C) 2019 Purism SPC
+ */
+#ifndef __NWL_DSI_H__
+#define __NWL_DSI_H__
+
+/* DSI HOST registers */
+#define NWL_DSI_CFG_NUM_LANES			0x0
+#define NWL_DSI_CFG_NONCONTINUOUS_CLK		0x4
+#define NWL_DSI_CFG_T_PRE			0x8
+#define NWL_DSI_CFG_T_POST			0xc
+#define NWL_DSI_CFG_TX_GAP			0x10
+#define NWL_DSI_CFG_AUTOINSERT_EOTP		0x14
+#define NWL_DSI_CFG_EXTRA_CMDS_AFTER_EOTP	0x18
+#define NWL_DSI_CFG_HTX_TO_COUNT		0x1c
+#define NWL_DSI_CFG_LRX_H_TO_COUNT		0x20
+#define NWL_DSI_CFG_BTA_H_TO_COUNT		0x24
+#define NWL_DSI_CFG_TWAKEUP			0x28
+#define NWL_DSI_CFG_STATUS_OUT			0x2c
+#define NWL_DSI_RX_ERROR_STATUS			0x30
+
+/* DSI DPI registers */
+#define NWL_DSI_PIXEL_PAYLOAD_SIZE		0x200
+#define NWL_DSI_PIXEL_FIFO_SEND_LEVEL		0x204
+#define NWL_DSI_INTERFACE_COLOR_CODING		0x208
+#define NWL_DSI_PIXEL_FORMAT			0x20c
+#define NWL_DSI_VSYNC_POLARITY			0x210
+#define NWL_DSI_VSYNC_POLARITY_ACTIVE_LOW	0
+#define NWL_DSI_VSYNC_POLARITY_ACTIVE_HIGH	BIT(1)
+
+#define NWL_DSI_HSYNC_POLARITY			0x214
+#define NWL_DSI_HSYNC_POLARITY_ACTIVE_LOW	0
+#define NWL_DSI_HSYNC_POLARITY_ACTIVE_HIGH	BIT(1)
+
+#define NWL_DSI_VIDEO_MODE			0x218
+#define NWL_DSI_HFP				0x21c
+#define NWL_DSI_HBP				0x220
+#define NWL_DSI_HSA				0x224
+#define NWL_DSI_ENABLE_MULT_PKTS		0x228
+#define NWL_DSI_VBP				0x22c
+#define NWL_DSI_VFP				0x230
+#define NWL_DSI_BLLP_MODE			0x234
+#define NWL_DSI_USE_NULL_PKT_BLLP		0x238
+#define NWL_DSI_VACTIVE				0x23c
+#define NWL_DSI_VC				0x240
+
+/* DSI APB PKT control */
+#define NWL_DSI_TX_PAYLOAD			0x280
+#define NWL_DSI_PKT_CONTROL			0x284
+#define NWL_DSI_SEND_PACKET			0x288
+#define NWL_DSI_PKT_STATUS			0x28c
+#define NWL_DSI_PKT_FIFO_WR_LEVEL		0x290
+#define NWL_DSI_PKT_FIFO_RD_LEVEL		0x294
+#define NWL_DSI_RX_PAYLOAD			0x298
+#define NWL_DSI_RX_PKT_HEADER			0x29c
+
+/* DSI IRQ handling */
+#define NWL_DSI_IRQ_STATUS			0x2a0
+#define NWL_DSI_SM_NOT_IDLE			BIT(0)
+#define NWL_DSI_TX_PKT_DONE			BIT(1)
+#define NWL_DSI_DPHY_DIRECTION			BIT(2)
+#define NWL_DSI_TX_FIFO_OVFLW			BIT(3)
+#define NWL_DSI_TX_FIFO_UDFLW			BIT(4)
+#define NWL_DSI_RX_FIFO_OVFLW			BIT(5)
+#define NWL_DSI_RX_FIFO_UDFLW			BIT(6)
+#define NWL_DSI_RX_PKT_HDR_RCVD			BIT(7)
+#define NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD	BIT(8)
+#define NWL_DSI_BTA_TIMEOUT			BIT(29)
+#define NWL_DSI_LP_RX_TIMEOUT			BIT(30)
+#define NWL_DSI_HS_TX_TIMEOUT			BIT(31)
+
+#define NWL_DSI_IRQ_STATUS2			0x2a4
+#define NWL_DSI_SINGLE_BIT_ECC_ERR		BIT(0)
+#define NWL_DSI_MULTI_BIT_ECC_ERR		BIT(1)
+#define NWL_DSI_CRC_ERR				BIT(2)
+
+#define NWL_DSI_IRQ_MASK			0x2a8
+#define NWL_DSI_SM_NOT_IDLE_MASK		BIT(0)
+#define NWL_DSI_TX_PKT_DONE_MASK		BIT(1)
+#define NWL_DSI_DPHY_DIRECTION_MASK		BIT(2)
+#define NWL_DSI_TX_FIFO_OVFLW_MASK		BIT(3)
+#define NWL_DSI_TX_FIFO_UDFLW_MASK		BIT(4)
+#define NWL_DSI_RX_FIFO_OVFLW_MASK		BIT(5)
+#define NWL_DSI_RX_FIFO_UDFLW_MASK		BIT(6)
+#define NWL_DSI_RX_PKT_HDR_RCVD_MASK		BIT(7)
+#define NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD_MASK	BIT(8)
+#define NWL_DSI_BTA_TIMEOUT_MASK		BIT(29)
+#define NWL_DSI_LP_RX_TIMEOUT_MASK		BIT(30)
+#define NWL_DSI_HS_TX_TIMEOUT_MASK		BIT(31)
+
+#define NWL_DSI_IRQ_MASK2			0x2ac
+#define NWL_DSI_SINGLE_BIT_ECC_ERR_MASK		BIT(0)
+#define NWL_DSI_MULTI_BIT_ECC_ERR_MASK		BIT(1)
+#define NWL_DSI_CRC_ERR_MASK			BIT(2)
+
+/*
+ * PKT_CONTROL format:
+ * [15: 0] - word count
+ * [17:16] - virtual channel
+ * [23:18] - data type
+ * [24]	   - LP or HS select (0 - LP, 1 - HS)
+ * [25]	   - perform BTA after packet is sent
+ * [26]	   - perform BTA only, no packet tx
+ */
+#define NWL_DSI_WC(x)		FIELD_PREP(GENMASK(15, 0), (x))
+#define NWL_DSI_TX_VC(x)	FIELD_PREP(GENMASK(17, 16), (x))
+#define NWL_DSI_TX_DT(x)	FIELD_PREP(GENMASK(23, 18), (x))
+#define NWL_DSI_HS_SEL(x)	FIELD_PREP(GENMASK(24, 24), (x))
+#define NWL_DSI_BTA_TX(x)	FIELD_PREP(GENMASK(25, 25), (x))
+#define NWL_DSI_BTA_NO_TX(x)	FIELD_PREP(GENMASK(26, 26), (x))
+
+/*
+ * RX_PKT_HEADER format:
+ * [15: 0] - word count
+ * [21:16] - data type
+ * [23:22] - virtual channel
+ */
+#define NWL_DSI_RX_DT(x)	FIELD_GET(GENMASK(21, 16), (x))
+#define NWL_DSI_RX_VC(x)	FIELD_GET(GENMASK(23, 22), (x))
+
+/* DSI Video mode */
+#define NWL_DSI_VM_BURST_MODE_WITH_SYNC_PULSES		0
+#define NWL_DSI_VM_NON_BURST_MODE_WITH_SYNC_EVENTS	BIT(0)
+#define NWL_DSI_VM_BURST_MODE				BIT(1)
+
+/* * DPI color coding */
+#define NWL_DSI_DPI_16_BIT_565_PACKED	0
+#define NWL_DSI_DPI_16_BIT_565_ALIGNED	1
+#define NWL_DSI_DPI_16_BIT_565_SHIFTED	2
+#define NWL_DSI_DPI_18_BIT_PACKED	3
+#define NWL_DSI_DPI_18_BIT_ALIGNED	4
+#define NWL_DSI_DPI_24_BIT		5
+
+/* * DPI Pixel format */
+#define NWL_DSI_PIXEL_FORMAT_16  0
+#define NWL_DSI_PIXEL_FORMAT_18  BIT(0)
+#define NWL_DSI_PIXEL_FORMAT_18L BIT(1)
+#define NWL_DSI_PIXEL_FORMAT_24  (BIT(0) | BIT(1))
+
+#endif /* __NWL_DSI_H__ */
diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c
index 8461ee8304ba..1e63ed6b18aa 100644
--- a/drivers/gpu/drm/bridge/panel.c
+++ b/drivers/gpu/drm/bridge/panel.c
@@ -166,7 +166,7 @@ static const struct drm_bridge_funcs panel_bridge_bridge_funcs = {
  *
  * The connector type is set to @panel->connector_type, which must be set to a
  * known type. Calling this function with a panel whose connector type is
- * DRM_MODE_CONNECTOR_Unknown will return NULL.
+ * DRM_MODE_CONNECTOR_Unknown will return ERR_PTR(-EINVAL).
  *
  * See devm_drm_panel_bridge_add() for an automatically managed version of this
  * function.
@@ -174,7 +174,7 @@ static const struct drm_bridge_funcs panel_bridge_bridge_funcs = {
 struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel)
 {
 	if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown))
-		return NULL;
+		return ERR_PTR(-EINVAL);
 
 	return drm_panel_bridge_add_typed(panel, panel->connector_type);
 }
@@ -265,7 +265,7 @@ struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev,
 					     struct drm_panel *panel)
 {
 	if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown))
-		return NULL;
+		return ERR_PTR(-EINVAL);
 
 	return devm_drm_panel_bridge_add_typed(dev, panel,
 					       panel->connector_type);
@@ -311,6 +311,7 @@ EXPORT_SYMBOL(devm_drm_panel_bridge_add_typed);
 
 /**
  * drm_panel_bridge_connector - return the connector for the panel bridge
+ * @bridge: The drm_bridge.
  *
  * drm_panel_bridge creates the connector.
  * This function gives external access to the connector.
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
index d3a53442d449..4b099196afeb 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -268,8 +268,6 @@ static int ps8640_probe(struct i2c_client *client)
 	if (!panel)
 		return -ENODEV;
 
-	panel->connector_type = DRM_MODE_CONNECTOR_eDP;
-
 	ps_bridge->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
 	if (IS_ERR(ps_bridge->panel_bridge))
 		return PTR_ERR(ps_bridge->panel_bridge);
diff --git a/drivers/gpu/drm/bridge/sii9234.c b/drivers/gpu/drm/bridge/sii9234.c
index f81f81b7051f..b1258f0ed205 100644
--- a/drivers/gpu/drm/bridge/sii9234.c
+++ b/drivers/gpu/drm/bridge/sii9234.c
@@ -836,7 +836,8 @@ static int sii9234_init_resources(struct sii9234 *ctx,
 	ctx->supplies[3].supply = "cvcc12";
 	ret = devm_regulator_bulk_get(ctx->dev, 4, ctx->supplies);
 	if (ret) {
-		dev_err(ctx->dev, "regulator_bulk failed\n");
+		if (ret != -EPROBE_DEFER)
+			dev_err(ctx->dev, "regulator_bulk failed\n");
 		return ret;
 	}
 
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
index dd56996fe9c7..d0db1acf11d7 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
@@ -630,7 +630,7 @@ static struct platform_driver snd_dw_hdmi_driver = {
 
 module_platform_driver(snd_dw_hdmi_driver);
 
-MODULE_AUTHOR("Russell King <rmk+kernel@arm.linux.org.uk>");
+MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
 MODULE_DESCRIPTION("Synopsis Designware HDMI AHB ALSA interface");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 383b1073d7de..30681398cfb0 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -92,6 +92,12 @@ static const u16 csc_coeff_rgb_in_eitu709[3][4] = {
 	{ 0x6756, 0x78ab, 0x2000, 0x0200 }
 };
 
+static const u16 csc_coeff_rgb_full_to_rgb_limited[3][4] = {
+	{ 0x1b7c, 0x0000, 0x0000, 0x0020 },
+	{ 0x0000, 0x1b7c, 0x0000, 0x0020 },
+	{ 0x0000, 0x0000, 0x1b7c, 0x0020 }
+};
+
 struct hdmi_vmode {
 	bool mdataenablepolarity;
 
@@ -109,6 +115,7 @@ struct hdmi_data_info {
 	unsigned int pix_repet_factor;
 	unsigned int hdcp_enable;
 	struct hdmi_vmode video_mode;
+	bool rgb_limited_range;
 };
 
 struct dw_hdmi_i2c {
@@ -956,7 +963,14 @@ static void hdmi_video_sample(struct dw_hdmi *hdmi)
 
 static int is_color_space_conversion(struct dw_hdmi *hdmi)
 {
-	return hdmi->hdmi_data.enc_in_bus_format != hdmi->hdmi_data.enc_out_bus_format;
+	struct hdmi_data_info *hdmi_data = &hdmi->hdmi_data;
+	bool is_input_rgb, is_output_rgb;
+
+	is_input_rgb = hdmi_bus_fmt_is_rgb(hdmi_data->enc_in_bus_format);
+	is_output_rgb = hdmi_bus_fmt_is_rgb(hdmi_data->enc_out_bus_format);
+
+	return (is_input_rgb != is_output_rgb) ||
+	       (is_input_rgb && is_output_rgb && hdmi_data->rgb_limited_range);
 }
 
 static int is_color_space_decimation(struct dw_hdmi *hdmi)
@@ -983,28 +997,37 @@ static int is_color_space_interpolation(struct dw_hdmi *hdmi)
 	return 0;
 }
 
+static bool is_csc_needed(struct dw_hdmi *hdmi)
+{
+	return is_color_space_conversion(hdmi) ||
+	       is_color_space_decimation(hdmi) ||
+	       is_color_space_interpolation(hdmi);
+}
+
 static void dw_hdmi_update_csc_coeffs(struct dw_hdmi *hdmi)
 {
 	const u16 (*csc_coeff)[3][4] = &csc_coeff_default;
+	bool is_input_rgb, is_output_rgb;
 	unsigned i;
 	u32 csc_scale = 1;
 
-	if (is_color_space_conversion(hdmi)) {
-		if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) {
-			if (hdmi->hdmi_data.enc_out_encoding ==
-						V4L2_YCBCR_ENC_601)
-				csc_coeff = &csc_coeff_rgb_out_eitu601;
-			else
-				csc_coeff = &csc_coeff_rgb_out_eitu709;
-		} else if (hdmi_bus_fmt_is_rgb(
-					hdmi->hdmi_data.enc_in_bus_format)) {
-			if (hdmi->hdmi_data.enc_out_encoding ==
-						V4L2_YCBCR_ENC_601)
-				csc_coeff = &csc_coeff_rgb_in_eitu601;
-			else
-				csc_coeff = &csc_coeff_rgb_in_eitu709;
-			csc_scale = 0;
-		}
+	is_input_rgb = hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_in_bus_format);
+	is_output_rgb = hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format);
+
+	if (!is_input_rgb && is_output_rgb) {
+		if (hdmi->hdmi_data.enc_out_encoding == V4L2_YCBCR_ENC_601)
+			csc_coeff = &csc_coeff_rgb_out_eitu601;
+		else
+			csc_coeff = &csc_coeff_rgb_out_eitu709;
+	} else if (is_input_rgb && !is_output_rgb) {
+		if (hdmi->hdmi_data.enc_out_encoding == V4L2_YCBCR_ENC_601)
+			csc_coeff = &csc_coeff_rgb_in_eitu601;
+		else
+			csc_coeff = &csc_coeff_rgb_in_eitu709;
+		csc_scale = 0;
+	} else if (is_input_rgb && is_output_rgb &&
+		   hdmi->hdmi_data.rgb_limited_range) {
+		csc_coeff = &csc_coeff_rgb_full_to_rgb_limited;
 	}
 
 	/* The CSC registers are sequential, alternating MSB then LSB */
@@ -1614,6 +1637,18 @@ static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
 	drm_hdmi_avi_infoframe_from_display_mode(&frame,
 						 &hdmi->connector, mode);
 
+	if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) {
+		drm_hdmi_avi_infoframe_quant_range(&frame, &hdmi->connector,
+						   mode,
+						   hdmi->hdmi_data.rgb_limited_range ?
+						   HDMI_QUANTIZATION_RANGE_LIMITED :
+						   HDMI_QUANTIZATION_RANGE_FULL);
+	} else {
+		frame.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT;
+		frame.ycc_quantization_range =
+			HDMI_YCC_QUANTIZATION_RANGE_LIMITED;
+	}
+
 	if (hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format))
 		frame.colorspace = HDMI_COLORSPACE_YUV444;
 	else if (hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format))
@@ -1654,8 +1689,6 @@ static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
 			HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
 	}
 
-	frame.scan_mode = HDMI_SCAN_MODE_NONE;
-
 	/*
 	 * The Designware IP uses a different byte format from standard
 	 * AVI info frames, though generally the bits are in the correct
@@ -2010,18 +2043,19 @@ static void dw_hdmi_enable_video_path(struct dw_hdmi *hdmi)
 	hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
 
 	/* Enable csc path */
-	if (is_color_space_conversion(hdmi)) {
+	if (is_csc_needed(hdmi)) {
 		hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_CSCCLK_DISABLE;
 		hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
-	}
 
-	/* Enable color space conversion if needed */
-	if (is_color_space_conversion(hdmi))
 		hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH,
 			    HDMI_MC_FLOWCTRL);
-	else
+	} else {
+		hdmi->mc_clkdis |= HDMI_MC_CLKDIS_CSCCLK_DISABLE;
+		hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
+
 		hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS,
 			    HDMI_MC_FLOWCTRL);
+	}
 }
 
 /* Workaround to clear the overflow condition */
@@ -2119,6 +2153,10 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
 	if (hdmi->hdmi_data.enc_out_bus_format == MEDIA_BUS_FMT_FIXED)
 		hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
 
+	hdmi->hdmi_data.rgb_limited_range = hdmi->sink_is_hdmi &&
+		drm_default_rgb_quant_range(mode) ==
+		HDMI_QUANTIZATION_RANGE_LIMITED;
+
 	hdmi->hdmi_data.pix_repet_factor = 0;
 	hdmi->hdmi_data.hdcp_enable = 0;
 	hdmi->hdmi_data.video_mode.mdataenablepolarity = true;
diff --git a/drivers/gpu/drm/bridge/tc358768.c b/drivers/gpu/drm/bridge/tc358768.c
index 1b39e8d37834..6650fe4cfc20 100644
--- a/drivers/gpu/drm/bridge/tc358768.c
+++ b/drivers/gpu/drm/bridge/tc358768.c
@@ -178,6 +178,8 @@ static int tc358768_clear_error(struct tc358768_priv *priv)
 
 static void tc358768_write(struct tc358768_priv *priv, u32 reg, u32 val)
 {
+	/* work around https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+	int tmpval = val;
 	size_t count = 2;
 
 	if (priv->error)
@@ -187,7 +189,7 @@ static void tc358768_write(struct tc358768_priv *priv, u32 reg, u32 val)
 	if (reg < 0x100 || reg >= 0x600)
 		count = 1;
 
-	priv->error = regmap_bulk_write(priv->regmap, reg, &val, count);
+	priv->error = regmap_bulk_write(priv->regmap, reg, &tmpval, count);
 }
 
 static void tc358768_read(struct tc358768_priv *priv, u32 reg, u32 *val)
diff --git a/drivers/gpu/drm/cirrus/Kconfig b/drivers/gpu/drm/cirrus/Kconfig
deleted file mode 100644
index c6bbd988b0e5..000000000000
--- a/drivers/gpu/drm/cirrus/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config DRM_CIRRUS_QEMU
-	tristate "Cirrus driver for QEMU emulated device"
-	depends on DRM && PCI && MMU
-	select DRM_KMS_HELPER
-	select DRM_GEM_SHMEM_HELPER
-	help
-	 This is a KMS driver for emulated cirrus device in qemu.
-	 It is *NOT* intended for real cirrus devices. This requires
-	 the modesetting userspace X.org driver.
-
-	 Cirrus is obsolete, the hardware was designed in the 90ies
-	 and can't keep up with todays needs.  More background:
-	 https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
-
-	 Better alternatives are:
-	   - stdvga (DRM_BOCHS, qemu -vga std, default in qemu 2.2+)
-	   - qxl (DRM_QXL, qemu -vga qxl, works best with spice)
-	   - virtio (DRM_VIRTIO_GPU), qemu -vga virtio)
diff --git a/drivers/gpu/drm/cirrus/Makefile b/drivers/gpu/drm/cirrus/Makefile
deleted file mode 100644
index 0c1ed3f99725..000000000000
--- a/drivers/gpu/drm/cirrus/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus.o
diff --git a/drivers/gpu/drm/cirrus/cirrus.c b/drivers/gpu/drm/cirrus/cirrus.c
deleted file mode 100644
index d2ff63ce8eaf..000000000000
--- a/drivers/gpu/drm/cirrus/cirrus.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2012-2019 Red Hat
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License version 2. See the file COPYING in the main
- * directory of this archive for more details.
- *
- * Authors: Matthew Garrett
- *	    Dave Airlie
- *	    Gerd Hoffmann
- *
- * Portions of this code derived from cirrusfb.c:
- * drivers/video/cirrusfb.c - driver for Cirrus Logic chipsets
- *
- * Copyright 1999-2001 Jeff Garzik <jgarzik@pobox.com>
- */
-
-#include <linux/console.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-
-#include <video/cirrus.h>
-#include <video/vga.h>
-
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_atomic_state_helper.h>
-#include <drm/drm_connector.h>
-#include <drm/drm_damage_helper.h>
-#include <drm/drm_drv.h>
-#include <drm/drm_fb_helper.h>
-#include <drm/drm_file.h>
-#include <drm/drm_format_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_gem_shmem_helper.h>
-#include <drm/drm_gem_framebuffer_helper.h>
-#include <drm/drm_ioctl.h>
-#include <drm/drm_modeset_helper_vtables.h>
-#include <drm/drm_probe_helper.h>
-#include <drm/drm_simple_kms_helper.h>
-
-#define DRIVER_NAME "cirrus"
-#define DRIVER_DESC "qemu cirrus vga"
-#define DRIVER_DATE "2019"
-#define DRIVER_MAJOR 2
-#define DRIVER_MINOR 0
-
-#define CIRRUS_MAX_PITCH (0x1FF << 3)      /* (4096 - 1) & ~111b bytes */
-#define CIRRUS_VRAM_SIZE (4 * 1024 * 1024) /* 4 MB */
-
-struct cirrus_device {
-	struct drm_device	       dev;
-	struct drm_simple_display_pipe pipe;
-	struct drm_connector	       conn;
-	unsigned int		       cpp;
-	unsigned int		       pitch;
-	void __iomem		       *vram;
-	void __iomem		       *mmio;
-};
-
-/* ------------------------------------------------------------------ */
-/*
- * The meat of this driver. The core passes us a mode and we have to program
- * it. The modesetting here is the bare minimum required to satisfy the qemu
- * emulation of this hardware, and running this against a real device is
- * likely to result in an inadequately programmed mode. We've already had
- * the opportunity to modify the mode, so whatever we receive here should
- * be something that can be correctly programmed and displayed
- */
-
-#define SEQ_INDEX 4
-#define SEQ_DATA 5
-
-static u8 rreg_seq(struct cirrus_device *cirrus, u8 reg)
-{
-	iowrite8(reg, cirrus->mmio + SEQ_INDEX);
-	return ioread8(cirrus->mmio + SEQ_DATA);
-}
-
-static void wreg_seq(struct cirrus_device *cirrus, u8 reg, u8 val)
-{
-	iowrite8(reg, cirrus->mmio + SEQ_INDEX);
-	iowrite8(val, cirrus->mmio + SEQ_DATA);
-}
-
-#define CRT_INDEX 0x14
-#define CRT_DATA 0x15
-
-static u8 rreg_crt(struct cirrus_device *cirrus, u8 reg)
-{
-	iowrite8(reg, cirrus->mmio + CRT_INDEX);
-	return ioread8(cirrus->mmio + CRT_DATA);
-}
-
-static void wreg_crt(struct cirrus_device *cirrus, u8 reg, u8 val)
-{
-	iowrite8(reg, cirrus->mmio + CRT_INDEX);
-	iowrite8(val, cirrus->mmio + CRT_DATA);
-}
-
-#define GFX_INDEX 0xe
-#define GFX_DATA 0xf
-
-static void wreg_gfx(struct cirrus_device *cirrus, u8 reg, u8 val)
-{
-	iowrite8(reg, cirrus->mmio + GFX_INDEX);
-	iowrite8(val, cirrus->mmio + GFX_DATA);
-}
-
-#define VGA_DAC_MASK  0x06
-
-static void wreg_hdr(struct cirrus_device *cirrus, u8 val)
-{
-	ioread8(cirrus->mmio + VGA_DAC_MASK);
-	ioread8(cirrus->mmio + VGA_DAC_MASK);
-	ioread8(cirrus->mmio + VGA_DAC_MASK);
-	ioread8(cirrus->mmio + VGA_DAC_MASK);
-	iowrite8(val, cirrus->mmio + VGA_DAC_MASK);
-}
-
-static int cirrus_convert_to(struct drm_framebuffer *fb)
-{
-	if (fb->format->cpp[0] == 4 && fb->pitches[0] > CIRRUS_MAX_PITCH) {
-		if (fb->width * 3 <= CIRRUS_MAX_PITCH)
-			/* convert from XR24 to RG24 */
-			return 3;
-		else
-			/* convert from XR24 to RG16 */
-			return 2;
-	}
-	return 0;
-}
-
-static int cirrus_cpp(struct drm_framebuffer *fb)
-{
-	int convert_cpp = cirrus_convert_to(fb);
-
-	if (convert_cpp)
-		return convert_cpp;
-	return fb->format->cpp[0];
-}
-
-static int cirrus_pitch(struct drm_framebuffer *fb)
-{
-	int convert_cpp = cirrus_convert_to(fb);
-
-	if (convert_cpp)
-		return convert_cpp * fb->width;
-	return fb->pitches[0];
-}
-
-static void cirrus_set_start_address(struct cirrus_device *cirrus, u32 offset)
-{
-	int idx;
-	u32 addr;
-	u8 tmp;
-
-	if (!drm_dev_enter(&cirrus->dev, &idx))
-		return;
-
-	addr = offset >> 2;
-	wreg_crt(cirrus, 0x0c, (u8)((addr >> 8) & 0xff));
-	wreg_crt(cirrus, 0x0d, (u8)(addr & 0xff));
-
-	tmp = rreg_crt(cirrus, 0x1b);
-	tmp &= 0xf2;
-	tmp |= (addr >> 16) & 0x01;
-	tmp |= (addr >> 15) & 0x0c;
-	wreg_crt(cirrus, 0x1b, tmp);
-
-	tmp = rreg_crt(cirrus, 0x1d);
-	tmp &= 0x7f;
-	tmp |= (addr >> 12) & 0x80;
-	wreg_crt(cirrus, 0x1d, tmp);
-
-	drm_dev_exit(idx);
-}
-
-static int cirrus_mode_set(struct cirrus_device *cirrus,
-			   struct drm_display_mode *mode,
-			   struct drm_framebuffer *fb)
-{
-	int hsyncstart, hsyncend, htotal, hdispend;
-	int vtotal, vdispend;
-	int tmp, idx;
-	int sr07 = 0, hdr = 0;
-
-	if (!drm_dev_enter(&cirrus->dev, &idx))
-		return -1;
-
-	htotal = mode->htotal / 8;
-	hsyncend = mode->hsync_end / 8;
-	hsyncstart = mode->hsync_start / 8;
-	hdispend = mode->hdisplay / 8;
-
-	vtotal = mode->vtotal;
-	vdispend = mode->vdisplay;
-
-	vdispend -= 1;
-	vtotal -= 2;
-
-	htotal -= 5;
-	hdispend -= 1;
-	hsyncstart += 1;
-	hsyncend += 1;
-
-	wreg_crt(cirrus, VGA_CRTC_V_SYNC_END, 0x20);
-	wreg_crt(cirrus, VGA_CRTC_H_TOTAL, htotal);
-	wreg_crt(cirrus, VGA_CRTC_H_DISP, hdispend);
-	wreg_crt(cirrus, VGA_CRTC_H_SYNC_START, hsyncstart);
-	wreg_crt(cirrus, VGA_CRTC_H_SYNC_END, hsyncend);
-	wreg_crt(cirrus, VGA_CRTC_V_TOTAL, vtotal & 0xff);
-	wreg_crt(cirrus, VGA_CRTC_V_DISP_END, vdispend & 0xff);
-
-	tmp = 0x40;
-	if ((vdispend + 1) & 512)
-		tmp |= 0x20;
-	wreg_crt(cirrus, VGA_CRTC_MAX_SCAN, tmp);
-
-	/*
-	 * Overflow bits for values that don't fit in the standard registers
-	 */
-	tmp = 0x10;
-	if (vtotal & 0x100)
-		tmp |= 0x01;
-	if (vdispend & 0x100)
-		tmp |= 0x02;
-	if ((vdispend + 1) & 0x100)
-		tmp |= 0x08;
-	if (vtotal & 0x200)
-		tmp |= 0x20;
-	if (vdispend & 0x200)
-		tmp |= 0x40;
-	wreg_crt(cirrus, VGA_CRTC_OVERFLOW, tmp);
-
-	tmp = 0;
-
-	/* More overflow bits */
-
-	if ((htotal + 5) & 0x40)
-		tmp |= 0x10;
-	if ((htotal + 5) & 0x80)
-		tmp |= 0x20;
-	if (vtotal & 0x100)
-		tmp |= 0x40;
-	if (vtotal & 0x200)
-		tmp |= 0x80;
-
-	wreg_crt(cirrus, CL_CRT1A, tmp);
-
-	/* Disable Hercules/CGA compatibility */
-	wreg_crt(cirrus, VGA_CRTC_MODE, 0x03);
-
-	sr07 = rreg_seq(cirrus, 0x07);
-	sr07 &= 0xe0;
-	hdr = 0;
-
-	cirrus->cpp = cirrus_cpp(fb);
-	switch (cirrus->cpp * 8) {
-	case 8:
-		sr07 |= 0x11;
-		break;
-	case 16:
-		sr07 |= 0x17;
-		hdr = 0xc1;
-		break;
-	case 24:
-		sr07 |= 0x15;
-		hdr = 0xc5;
-		break;
-	case 32:
-		sr07 |= 0x19;
-		hdr = 0xc5;
-		break;
-	default:
-		drm_dev_exit(idx);
-		return -1;
-	}
-
-	wreg_seq(cirrus, 0x7, sr07);
-
-	/* Program the pitch */
-	cirrus->pitch = cirrus_pitch(fb);
-	tmp = cirrus->pitch / 8;
-	wreg_crt(cirrus, VGA_CRTC_OFFSET, tmp);
-
-	/* Enable extended blanking and pitch bits, and enable full memory */
-	tmp = 0x22;
-	tmp |= (cirrus->pitch >> 7) & 0x10;
-	tmp |= (cirrus->pitch >> 6) & 0x40;
-	wreg_crt(cirrus, 0x1b, tmp);
-
-	/* Enable high-colour modes */
-	wreg_gfx(cirrus, VGA_GFX_MODE, 0x40);
-
-	/* And set graphics mode */
-	wreg_gfx(cirrus, VGA_GFX_MISC, 0x01);
-
-	wreg_hdr(cirrus, hdr);
-
-	cirrus_set_start_address(cirrus, 0);
-
-	/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
-	outb(0x20, 0x3c0);
-
-	drm_dev_exit(idx);
-	return 0;
-}
-
-static int cirrus_fb_blit_rect(struct drm_framebuffer *fb,
-			       struct drm_rect *rect)
-{
-	struct cirrus_device *cirrus = fb->dev->dev_private;
-	void *vmap;
-	int idx, ret;
-
-	ret = -ENODEV;
-	if (!drm_dev_enter(&cirrus->dev, &idx))
-		goto out;
-
-	ret = -ENOMEM;
-	vmap = drm_gem_shmem_vmap(fb->obj[0]);
-	if (!vmap)
-		goto out_dev_exit;
-
-	if (cirrus->cpp == fb->format->cpp[0])
-		drm_fb_memcpy_dstclip(cirrus->vram,
-				      vmap, fb, rect);
-
-	else if (fb->format->cpp[0] == 4 && cirrus->cpp == 2)
-		drm_fb_xrgb8888_to_rgb565_dstclip(cirrus->vram,
-						  cirrus->pitch,
-						  vmap, fb, rect, false);
-
-	else if (fb->format->cpp[0] == 4 && cirrus->cpp == 3)
-		drm_fb_xrgb8888_to_rgb888_dstclip(cirrus->vram,
-						  cirrus->pitch,
-						  vmap, fb, rect);
-
-	else
-		WARN_ON_ONCE("cpp mismatch");
-
-	drm_gem_shmem_vunmap(fb->obj[0], vmap);
-	ret = 0;
-
-out_dev_exit:
-	drm_dev_exit(idx);
-out:
-	return ret;
-}
-
-static int cirrus_fb_blit_fullscreen(struct drm_framebuffer *fb)
-{
-	struct drm_rect fullscreen = {
-		.x1 = 0,
-		.x2 = fb->width,
-		.y1 = 0,
-		.y2 = fb->height,
-	};
-	return cirrus_fb_blit_rect(fb, &fullscreen);
-}
-
-static int cirrus_check_size(int width, int height,
-			     struct drm_framebuffer *fb)
-{
-	int pitch = width * 2;
-
-	if (fb)
-		pitch = cirrus_pitch(fb);
-
-	if (pitch > CIRRUS_MAX_PITCH)
-		return -EINVAL;
-	if (pitch * height > CIRRUS_VRAM_SIZE)
-		return -EINVAL;
-	return 0;
-}
-
-/* ------------------------------------------------------------------ */
-/* cirrus connector						      */
-
-static int cirrus_conn_get_modes(struct drm_connector *conn)
-{
-	int count;
-
-	count = drm_add_modes_noedid(conn,
-				     conn->dev->mode_config.max_width,
-				     conn->dev->mode_config.max_height);
-	drm_set_preferred_mode(conn, 1024, 768);
-	return count;
-}
-
-static const struct drm_connector_helper_funcs cirrus_conn_helper_funcs = {
-	.get_modes = cirrus_conn_get_modes,
-};
-
-static const struct drm_connector_funcs cirrus_conn_funcs = {
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = drm_connector_cleanup,
-	.reset = drm_atomic_helper_connector_reset,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-static int cirrus_conn_init(struct cirrus_device *cirrus)
-{
-	drm_connector_helper_add(&cirrus->conn, &cirrus_conn_helper_funcs);
-	return drm_connector_init(&cirrus->dev, &cirrus->conn,
-				  &cirrus_conn_funcs, DRM_MODE_CONNECTOR_VGA);
-
-}
-
-/* ------------------------------------------------------------------ */
-/* cirrus (simple) display pipe					      */
-
-static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
-						   const struct drm_display_mode *mode)
-{
-	if (cirrus_check_size(mode->hdisplay, mode->vdisplay, NULL) < 0)
-		return MODE_BAD;
-	return MODE_OK;
-}
-
-static int cirrus_pipe_check(struct drm_simple_display_pipe *pipe,
-			     struct drm_plane_state *plane_state,
-			     struct drm_crtc_state *crtc_state)
-{
-	struct drm_framebuffer *fb = plane_state->fb;
-
-	if (!fb)
-		return 0;
-	return cirrus_check_size(fb->width, fb->height, fb);
-}
-
-static void cirrus_pipe_enable(struct drm_simple_display_pipe *pipe,
-			       struct drm_crtc_state *crtc_state,
-			       struct drm_plane_state *plane_state)
-{
-	struct cirrus_device *cirrus = pipe->crtc.dev->dev_private;
-
-	cirrus_mode_set(cirrus, &crtc_state->mode, plane_state->fb);
-	cirrus_fb_blit_fullscreen(plane_state->fb);
-}
-
-static void cirrus_pipe_update(struct drm_simple_display_pipe *pipe,
-			       struct drm_plane_state *old_state)
-{
-	struct cirrus_device *cirrus = pipe->crtc.dev->dev_private;
-	struct drm_plane_state *state = pipe->plane.state;
-	struct drm_crtc *crtc = &pipe->crtc;
-	struct drm_rect rect;
-
-	if (pipe->plane.state->fb &&
-	    cirrus->cpp != cirrus_cpp(pipe->plane.state->fb))
-		cirrus_mode_set(cirrus, &crtc->mode,
-				pipe->plane.state->fb);
-
-	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
-		cirrus_fb_blit_rect(pipe->plane.state->fb, &rect);
-}
-
-static const struct drm_simple_display_pipe_funcs cirrus_pipe_funcs = {
-	.mode_valid = cirrus_pipe_mode_valid,
-	.check	    = cirrus_pipe_check,
-	.enable	    = cirrus_pipe_enable,
-	.update	    = cirrus_pipe_update,
-};
-
-static const uint32_t cirrus_formats[] = {
-	DRM_FORMAT_RGB565,
-	DRM_FORMAT_RGB888,
-	DRM_FORMAT_XRGB8888,
-};
-
-static const uint64_t cirrus_modifiers[] = {
-	DRM_FORMAT_MOD_LINEAR,
-	DRM_FORMAT_MOD_INVALID
-};
-
-static int cirrus_pipe_init(struct cirrus_device *cirrus)
-{
-	return drm_simple_display_pipe_init(&cirrus->dev,
-					    &cirrus->pipe,
-					    &cirrus_pipe_funcs,
-					    cirrus_formats,
-					    ARRAY_SIZE(cirrus_formats),
-					    cirrus_modifiers,
-					    &cirrus->conn);
-}
-
-/* ------------------------------------------------------------------ */
-/* cirrus framebuffers & mode config				      */
-
-static struct drm_framebuffer*
-cirrus_fb_create(struct drm_device *dev, struct drm_file *file_priv,
-		 const struct drm_mode_fb_cmd2 *mode_cmd)
-{
-	if (mode_cmd->pixel_format != DRM_FORMAT_RGB565 &&
-	    mode_cmd->pixel_format != DRM_FORMAT_RGB888 &&
-	    mode_cmd->pixel_format != DRM_FORMAT_XRGB8888)
-		return ERR_PTR(-EINVAL);
-	if (cirrus_check_size(mode_cmd->width, mode_cmd->height, NULL) < 0)
-		return ERR_PTR(-EINVAL);
-	return drm_gem_fb_create_with_dirty(dev, file_priv, mode_cmd);
-}
-
-static const struct drm_mode_config_funcs cirrus_mode_config_funcs = {
-	.fb_create = cirrus_fb_create,
-	.atomic_check = drm_atomic_helper_check,
-	.atomic_commit = drm_atomic_helper_commit,
-};
-
-static void cirrus_mode_config_init(struct cirrus_device *cirrus)
-{
-	struct drm_device *dev = &cirrus->dev;
-
-	drm_mode_config_init(dev);
-	dev->mode_config.min_width = 0;
-	dev->mode_config.min_height = 0;
-	dev->mode_config.max_width = CIRRUS_MAX_PITCH / 2;
-	dev->mode_config.max_height = 1024;
-	dev->mode_config.preferred_depth = 16;
-	dev->mode_config.prefer_shadow = 0;
-	dev->mode_config.funcs = &cirrus_mode_config_funcs;
-}
-
-/* ------------------------------------------------------------------ */
-
-static void cirrus_release(struct drm_device *dev)
-{
-	struct cirrus_device *cirrus = dev->dev_private;
-
-	drm_mode_config_cleanup(dev);
-	kfree(cirrus);
-}
-
-DEFINE_DRM_GEM_FOPS(cirrus_fops);
-
-static struct drm_driver cirrus_driver = {
-	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
-
-	.name		 = DRIVER_NAME,
-	.desc		 = DRIVER_DESC,
-	.date		 = DRIVER_DATE,
-	.major		 = DRIVER_MAJOR,
-	.minor		 = DRIVER_MINOR,
-
-	.fops		 = &cirrus_fops,
-	DRM_GEM_SHMEM_DRIVER_OPS,
-	.release         = cirrus_release,
-};
-
-static int cirrus_pci_probe(struct pci_dev *pdev,
-			    const struct pci_device_id *ent)
-{
-	struct drm_device *dev;
-	struct cirrus_device *cirrus;
-	int ret;
-
-	ret = drm_fb_helper_remove_conflicting_pci_framebuffers(pdev, "cirrusdrmfb");
-	if (ret)
-		return ret;
-
-	ret = pci_enable_device(pdev);
-	if (ret)
-		return ret;
-
-	ret = pci_request_regions(pdev, DRIVER_NAME);
-	if (ret)
-		return ret;
-
-	ret = -ENOMEM;
-	cirrus = kzalloc(sizeof(*cirrus), GFP_KERNEL);
-	if (cirrus == NULL)
-		goto err_pci_release;
-
-	dev = &cirrus->dev;
-	ret = drm_dev_init(dev, &cirrus_driver, &pdev->dev);
-	if (ret)
-		goto err_free_cirrus;
-	dev->dev_private = cirrus;
-
-	ret = -ENOMEM;
-	cirrus->vram = ioremap(pci_resource_start(pdev, 0),
-			       pci_resource_len(pdev, 0));
-	if (cirrus->vram == NULL)
-		goto err_dev_put;
-
-	cirrus->mmio = ioremap(pci_resource_start(pdev, 1),
-			       pci_resource_len(pdev, 1));
-	if (cirrus->mmio == NULL)
-		goto err_unmap_vram;
-
-	cirrus_mode_config_init(cirrus);
-
-	ret = cirrus_conn_init(cirrus);
-	if (ret < 0)
-		goto err_cleanup;
-
-	ret = cirrus_pipe_init(cirrus);
-	if (ret < 0)
-		goto err_cleanup;
-
-	drm_mode_config_reset(dev);
-
-	dev->pdev = pdev;
-	pci_set_drvdata(pdev, dev);
-	ret = drm_dev_register(dev, 0);
-	if (ret)
-		goto err_cleanup;
-
-	drm_fbdev_generic_setup(dev, dev->mode_config.preferred_depth);
-	return 0;
-
-err_cleanup:
-	drm_mode_config_cleanup(dev);
-	iounmap(cirrus->mmio);
-err_unmap_vram:
-	iounmap(cirrus->vram);
-err_dev_put:
-	drm_dev_put(dev);
-err_free_cirrus:
-	kfree(cirrus);
-err_pci_release:
-	pci_release_regions(pdev);
-	return ret;
-}
-
-static void cirrus_pci_remove(struct pci_dev *pdev)
-{
-	struct drm_device *dev = pci_get_drvdata(pdev);
-	struct cirrus_device *cirrus = dev->dev_private;
-
-	drm_dev_unplug(dev);
-	drm_atomic_helper_shutdown(dev);
-	iounmap(cirrus->mmio);
-	iounmap(cirrus->vram);
-	drm_dev_put(dev);
-	pci_release_regions(pdev);
-}
-
-static const struct pci_device_id pciidlist[] = {
-	{
-		.vendor    = PCI_VENDOR_ID_CIRRUS,
-		.device    = PCI_DEVICE_ID_CIRRUS_5446,
-		/* only bind to the cirrus chip in qemu */
-		.subvendor = PCI_SUBVENDOR_ID_REDHAT_QUMRANET,
-		.subdevice = PCI_SUBDEVICE_ID_QEMU,
-	}, {
-		.vendor    = PCI_VENDOR_ID_CIRRUS,
-		.device    = PCI_DEVICE_ID_CIRRUS_5446,
-		.subvendor = PCI_VENDOR_ID_XEN,
-		.subdevice = 0x0001,
-	},
-	{ /* end if list */ }
-};
-
-static struct pci_driver cirrus_pci_driver = {
-	.name = DRIVER_NAME,
-	.id_table = pciidlist,
-	.probe = cirrus_pci_probe,
-	.remove = cirrus_pci_remove,
-};
-
-static int __init cirrus_init(void)
-{
-	if (vgacon_text_force())
-		return -EINVAL;
-	return pci_register_driver(&cirrus_pci_driver);
-}
-
-static void __exit cirrus_exit(void)
-{
-	pci_unregister_driver(&cirrus_pci_driver);
-}
-
-module_init(cirrus_init);
-module_exit(cirrus_exit);
-
-MODULE_DEVICE_TABLE(pci, pciidlist);
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 9ccfbf213d72..965173fd0ac2 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1641,10 +1641,10 @@ static const struct drm_info_list drm_atomic_debugfs_list[] = {
 	{"state", drm_state_info, 0},
 };
 
-int drm_atomic_debugfs_init(struct drm_minor *minor)
+void drm_atomic_debugfs_init(struct drm_minor *minor)
 {
-	return drm_debugfs_create_files(drm_atomic_debugfs_list,
-			ARRAY_SIZE(drm_atomic_debugfs_list),
-			minor->debugfs_root, minor);
+	drm_debugfs_create_files(drm_atomic_debugfs_list,
+				 ARRAY_SIZE(drm_atomic_debugfs_list),
+				 minor->debugfs_root, minor);
 }
 #endif
diff --git a/drivers/gpu/drm/drm_auth.c b/drivers/gpu/drm/drm_auth.c
index 531b876d0ed8..800ac39f3213 100644
--- a/drivers/gpu/drm/drm_auth.c
+++ b/drivers/gpu/drm/drm_auth.c
@@ -135,6 +135,7 @@ static int drm_set_master(struct drm_device *dev, struct drm_file *fpriv,
 		}
 	}
 
+	fpriv->was_master = (ret == 0);
 	return ret;
 }
 
@@ -174,17 +175,77 @@ static int drm_new_set_master(struct drm_device *dev, struct drm_file *fpriv)
 	return ret;
 }
 
+/*
+ * In the olden days the SET/DROP_MASTER ioctls used to return EACCES when
+ * CAP_SYS_ADMIN was not set. This was used to prevent rogue applications
+ * from becoming master and/or failing to release it.
+ *
+ * At the same time, the first client (for a given VT) is _always_ master.
+ * Thus in order for the ioctls to succeed, one had to _explicitly_ run the
+ * application as root or flip the setuid bit.
+ *
+ * If the CAP_SYS_ADMIN was missing, no other client could become master...
+ * EVER :-( Leading to a) the graphics session dying badly or b) a completely
+ * locked session.
+ *
+ *
+ * As some point systemd-logind was introduced to orchestrate and delegate
+ * master as applicable. It does so by opening the fd and passing it to users
+ * while in itself logind a) does the set/drop master per users' request and
+ * b)  * implicitly drops master on VT switch.
+ *
+ * Even though logind looks like the future, there are a few issues:
+ *  - some platforms don't have equivalent (Android, CrOS, some BSDs) so
+ * root is required _solely_ for SET/DROP MASTER.
+ *  - applications may not be updated to use it,
+ *  - any client which fails to drop master* can DoS the application using
+ * logind, to a varying degree.
+ *
+ * * Either due missing CAP_SYS_ADMIN or simply not calling DROP_MASTER.
+ *
+ *
+ * Here we implement the next best thing:
+ *  - ensure the logind style of fd passing works unchanged, and
+ *  - allow a client to drop/set master, iff it is/was master at a given point
+ * in time.
+ *
+ * Note: DROP_MASTER cannot be free for all, as an arbitrator user could:
+ *  - DoS/crash the arbitrator - details would be implementation specific
+ *  - open the node, become master implicitly and cause issues
+ *
+ * As a result this fixes the following when using root-less build w/o logind
+ * - startx
+ * - weston
+ * - various compositors based on wlroots
+ */
+static int
+drm_master_check_perm(struct drm_device *dev, struct drm_file *file_priv)
+{
+	if (file_priv->pid == task_pid(current) && file_priv->was_master)
+		return 0;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	return 0;
+}
+
 int drm_setmaster_ioctl(struct drm_device *dev, void *data,
 			struct drm_file *file_priv)
 {
 	int ret = 0;
 
 	mutex_lock(&dev->master_mutex);
+
+	ret = drm_master_check_perm(dev, file_priv);
+	if (ret)
+		goto out_unlock;
+
 	if (drm_is_current_master(file_priv))
 		goto out_unlock;
 
 	if (dev->master) {
-		ret = -EINVAL;
+		ret = -EBUSY;
 		goto out_unlock;
 	}
 
@@ -224,6 +285,12 @@ int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
 	int ret = -EINVAL;
 
 	mutex_lock(&dev->master_mutex);
+
+	ret = drm_master_check_perm(dev, file_priv);
+	if (ret)
+		goto out_unlock;
+
+	ret = -EINVAL;
 	if (!drm_is_current_master(file_priv))
 		goto out_unlock;
 
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index 121481f6aa71..88eedee018d3 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -183,6 +183,12 @@
  *		 plane does not expose the "alpha" property, then this is
  *		 assumed to be 1.0
  *
+ * IN_FORMATS:
+ *	Blob property which contains the set of buffer format and modifier
+ *	pairs supported by this plane. The blob is a drm_format_modifier_blob
+ *	struct. Without this property the plane doesn't support buffers with
+ *	modifiers. Userspace cannot change this property.
+ *
  * Note that all the property extensions described here apply either to the
  * plane or the CRTC (e.g. for the background color, which currently is not
  * exposed and assumed to be black).
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index dcabf5698333..ef26ac57f039 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -33,6 +33,7 @@
 #include <linux/mm.h>
 #include <linux/mman.h>
 #include <linux/nospec.h>
+#include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/vmalloc.h>
@@ -43,7 +44,6 @@
 #include <drm/drm_device.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_file.h>
-#include <drm/drm_pci.h>
 #include <drm/drm_print.h>
 
 #include "drm_legacy.h"
diff --git a/drivers/gpu/drm/drm_client.c b/drivers/gpu/drm/drm_client.c
index 6b0c6ef8b9b3..8cb93f5209a4 100644
--- a/drivers/gpu/drm/drm_client.c
+++ b/drivers/gpu/drm/drm_client.c
@@ -457,10 +457,10 @@ static const struct drm_info_list drm_client_debugfs_list[] = {
 	{ "internal_clients", drm_client_debugfs_internal_clients, 0 },
 };
 
-int drm_client_debugfs_init(struct drm_minor *minor)
+void drm_client_debugfs_init(struct drm_minor *minor)
 {
-	return drm_debugfs_create_files(drm_client_debugfs_list,
-					ARRAY_SIZE(drm_client_debugfs_list),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(drm_client_debugfs_list,
+				 ARRAY_SIZE(drm_client_debugfs_list),
+				 minor->debugfs_root, minor);
 }
 #endif
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 644f0ad10671..b1099e1251a2 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1970,6 +1970,8 @@ int drm_connector_update_edid_property(struct drm_connector *connector,
 	else
 		drm_reset_display_info(connector);
 
+	drm_update_tile_info(connector, edid);
+
 	drm_object_property_set_value(&connector->base,
 				      dev->mode_config.non_desktop_property,
 				      connector->display_info.non_desktop);
@@ -2392,7 +2394,7 @@ EXPORT_SYMBOL(drm_mode_put_tile_group);
  * tile group or NULL if not found.
  */
 struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
-					       char topology[8])
+					       const char topology[8])
 {
 	struct drm_tile_group *tg;
 	int id;
@@ -2422,7 +2424,7 @@ EXPORT_SYMBOL(drm_mode_get_tile_group);
  * new tile group or NULL.
  */
 struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
-						  char topology[8])
+						  const char topology[8])
 {
 	struct drm_tile_group *tg;
 	int ret;
diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h
index 16f2413403aa..da96b2f64d7e 100644
--- a/drivers/gpu/drm/drm_crtc_internal.h
+++ b/drivers/gpu/drm/drm_crtc_internal.h
@@ -82,6 +82,7 @@ int drm_mode_setcrtc(struct drm_device *dev,
 /* drm_mode_config.c */
 int drm_modeset_register_all(struct drm_device *dev);
 void drm_modeset_unregister_all(struct drm_device *dev);
+void drm_mode_config_validate(struct drm_device *dev);
 
 /* drm_modes.c */
 const char *drm_get_mode_status_name(enum drm_mode_status status);
@@ -224,7 +225,7 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
 /* drm_atomic.c */
 #ifdef CONFIG_DEBUG_FS
 struct drm_minor;
-int drm_atomic_debugfs_init(struct drm_minor *minor);
+void drm_atomic_debugfs_init(struct drm_minor *minor);
 #endif
 
 int __drm_atomic_helper_disable_plane(struct drm_plane *plane,
@@ -278,3 +279,4 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
 void drm_mode_fixup_1366x768(struct drm_display_mode *mode);
 void drm_reset_display_info(struct drm_connector *connector);
 u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid);
+void drm_update_tile_info(struct drm_connector *connector, const struct edid *edid);
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index 4e673d318503..2bea22130703 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -172,8 +172,8 @@ static const struct file_operations drm_debugfs_fops = {
  * &struct drm_info_list in the given root directory. These files will be removed
  * automatically on drm_debugfs_cleanup().
  */
-int drm_debugfs_create_files(const struct drm_info_list *files, int count,
-			     struct dentry *root, struct drm_minor *minor)
+void drm_debugfs_create_files(const struct drm_info_list *files, int count,
+			      struct dentry *root, struct drm_minor *minor)
 {
 	struct drm_device *dev = minor->dev;
 	struct drm_info_node *tmp;
@@ -199,7 +199,6 @@ int drm_debugfs_create_files(const struct drm_info_list *files, int count,
 		list_add(&tmp->list, &minor->debugfs_list);
 		mutex_unlock(&minor->debugfs_lock);
 	}
-	return 0;
 }
 EXPORT_SYMBOL(drm_debugfs_create_files);
 
@@ -208,52 +207,28 @@ int drm_debugfs_init(struct drm_minor *minor, int minor_id,
 {
 	struct drm_device *dev = minor->dev;
 	char name[64];
-	int ret;
 
 	INIT_LIST_HEAD(&minor->debugfs_list);
 	mutex_init(&minor->debugfs_lock);
 	sprintf(name, "%d", minor_id);
 	minor->debugfs_root = debugfs_create_dir(name, root);
 
-	ret = drm_debugfs_create_files(drm_debugfs_list, DRM_DEBUGFS_ENTRIES,
-				       minor->debugfs_root, minor);
-	if (ret) {
-		debugfs_remove(minor->debugfs_root);
-		minor->debugfs_root = NULL;
-		DRM_ERROR("Failed to create core drm debugfs files\n");
-		return ret;
-	}
+	drm_debugfs_create_files(drm_debugfs_list, DRM_DEBUGFS_ENTRIES,
+				 minor->debugfs_root, minor);
 
 	if (drm_drv_uses_atomic_modeset(dev)) {
-		ret = drm_atomic_debugfs_init(minor);
-		if (ret) {
-			DRM_ERROR("Failed to create atomic debugfs files\n");
-			return ret;
-		}
+		drm_atomic_debugfs_init(minor);
 	}
 
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		ret = drm_framebuffer_debugfs_init(minor);
-		if (ret) {
-			DRM_ERROR("Failed to create framebuffer debugfs file\n");
-			return ret;
-		}
+		drm_framebuffer_debugfs_init(minor);
 
-		ret = drm_client_debugfs_init(minor);
-		if (ret) {
-			DRM_ERROR("Failed to create client debugfs file\n");
-			return ret;
-		}
+		drm_client_debugfs_init(minor);
 	}
 
-	if (dev->driver->debugfs_init) {
-		ret = dev->driver->debugfs_init(minor);
-		if (ret) {
-			DRM_ERROR("DRM: Driver failed to initialize "
-				  "/sys/kernel/debug/dri.\n");
-			return ret;
-		}
-	}
+	if (dev->driver->debugfs_init)
+		dev->driver->debugfs_init(minor);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/drm_dma.c b/drivers/gpu/drm/drm_dma.c
index a7add55a85b4..d07ba54ec945 100644
--- a/drivers/gpu/drm/drm_dma.c
+++ b/drivers/gpu/drm/drm_dma.c
@@ -34,9 +34,9 @@
  */
 
 #include <linux/export.h>
+#include <linux/pci.h>
 
 #include <drm/drm_drv.h>
-#include <drm/drm_pci.h>
 #include <drm/drm_print.h>
 
 #include "drm_legacy.h"
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index c6fbe6e6bc9d..612a59ec8116 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -1238,6 +1238,8 @@ static const struct dpcd_quirk dpcd_quirk_list[] = {
 	{ OUI(0x00, 0x00, 0x00), DEVICE_ID('C', 'H', '7', '5', '1', '1'), false, BIT(DP_DPCD_QUIRK_NO_SINK_COUNT) },
 	/* Synaptics DP1.4 MST hubs can support DSC without virtual DPCD */
 	{ OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) },
+	/* Apple MacBookPro 2017 15 inch eDP Retina panel reports too low DP_MAX_LINK_RATE */
+	{ OUI(0x00, 0x10, 0xfa), DEVICE_ID(101, 68, 21, 101, 98, 97), false, BIT(DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS) },
 };
 
 #undef OUI
@@ -1533,3 +1535,97 @@ int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_S
 	return num_bpc;
 }
 EXPORT_SYMBOL(drm_dp_dsc_sink_supported_input_bpcs);
+
+/**
+ * drm_dp_get_phy_test_pattern() - get the requested pattern from the sink.
+ * @aux: DisplayPort AUX channel
+ * @data: DP phy compliance test parameters.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
+				struct drm_dp_phy_test_params *data)
+{
+	int err;
+	u8 rate, lanes;
+
+	err = drm_dp_dpcd_readb(aux, DP_TEST_LINK_RATE, &rate);
+	if (err < 0)
+		return err;
+	data->link_rate = drm_dp_bw_code_to_link_rate(rate);
+
+	err = drm_dp_dpcd_readb(aux, DP_TEST_LANE_COUNT, &lanes);
+	if (err < 0)
+		return err;
+	data->num_lanes = lanes & DP_MAX_LANE_COUNT_MASK;
+
+	if (lanes & DP_ENHANCED_FRAME_CAP)
+		data->enhanced_frame_cap = true;
+
+	err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern);
+	if (err < 0)
+		return err;
+
+	switch (data->phy_pattern) {
+	case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+		err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0,
+				       &data->custom80, sizeof(data->custom80));
+		if (err < 0)
+			return err;
+
+		break;
+	case DP_PHY_TEST_PATTERN_CP2520:
+		err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET,
+				       &data->hbr2_reset,
+				       sizeof(data->hbr2_reset));
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_get_phy_test_pattern);
+
+/**
+ * drm_dp_set_phy_test_pattern() - set the pattern to the sink.
+ * @aux: DisplayPort AUX channel
+ * @data: DP phy compliance test parameters.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
+				struct drm_dp_phy_test_params *data, u8 dp_rev)
+{
+	int err, i;
+	u8 link_config[2];
+	u8 test_pattern;
+
+	link_config[0] = drm_dp_link_rate_to_bw_code(data->link_rate);
+	link_config[1] = data->num_lanes;
+	if (data->enhanced_frame_cap)
+		link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+	err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, link_config, 2);
+	if (err < 0)
+		return err;
+
+	test_pattern = data->phy_pattern;
+	if (dp_rev < 0x12) {
+		test_pattern = (test_pattern << 2) &
+			       DP_LINK_QUAL_PATTERN_11_MASK;
+		err = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET,
+					 test_pattern);
+		if (err < 0)
+			return err;
+	} else {
+		for (i = 0; i < data->num_lanes; i++) {
+			err = drm_dp_dpcd_writeb(aux,
+						 DP_LINK_QUAL_LANE0_SET + i,
+						 test_pattern);
+			if (err < 0)
+				return err;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_set_phy_test_pattern);
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 283615e44838..1e26b89628f9 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
+#include <linux/iopoll.h>
 
 #if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS)
 #include <linux/stacktrace.h>
@@ -687,51 +688,45 @@ static void drm_dp_encode_sideband_reply(struct drm_dp_sideband_msg_reply_body *
 	raw->cur_len = idx;
 }
 
-/* this adds a chunk of msg to the builder to get the final msg */
-static bool drm_dp_sideband_msg_build(struct drm_dp_sideband_msg_rx *msg,
-				      u8 *replybuf, u8 replybuflen, bool hdr)
+static int drm_dp_sideband_msg_set_header(struct drm_dp_sideband_msg_rx *msg,
+					  struct drm_dp_sideband_msg_hdr *hdr,
+					  u8 hdrlen)
 {
-	int ret;
-	u8 crc4;
+	/*
+	 * ignore out-of-order messages or messages that are part of a
+	 * failed transaction
+	 */
+	if (!hdr->somt && !msg->have_somt)
+		return false;
 
-	if (hdr) {
-		u8 hdrlen;
-		struct drm_dp_sideband_msg_hdr recv_hdr;
-		ret = drm_dp_decode_sideband_msg_hdr(&recv_hdr, replybuf, replybuflen, &hdrlen);
-		if (ret == false) {
-			print_hex_dump(KERN_DEBUG, "failed hdr", DUMP_PREFIX_NONE, 16, 1, replybuf, replybuflen, false);
-			return false;
-		}
+	/* get length contained in this portion */
+	msg->curchunk_idx = 0;
+	msg->curchunk_len = hdr->msg_len;
+	msg->curchunk_hdrlen = hdrlen;
 
-		/*
-		 * ignore out-of-order messages or messages that are part of a
-		 * failed transaction
-		 */
-		if (!recv_hdr.somt && !msg->have_somt)
-			return false;
+	/* we have already gotten an somt - don't bother parsing */
+	if (hdr->somt && msg->have_somt)
+		return false;
 
-		/* get length contained in this portion */
-		msg->curchunk_len = recv_hdr.msg_len;
-		msg->curchunk_hdrlen = hdrlen;
+	if (hdr->somt) {
+		memcpy(&msg->initial_hdr, hdr,
+		       sizeof(struct drm_dp_sideband_msg_hdr));
+		msg->have_somt = true;
+	}
+	if (hdr->eomt)
+		msg->have_eomt = true;
 
-		/* we have already gotten an somt - don't bother parsing */
-		if (recv_hdr.somt && msg->have_somt)
-			return false;
+	return true;
+}
 
-		if (recv_hdr.somt) {
-			memcpy(&msg->initial_hdr, &recv_hdr, sizeof(struct drm_dp_sideband_msg_hdr));
-			msg->have_somt = true;
-		}
-		if (recv_hdr.eomt)
-			msg->have_eomt = true;
+/* this adds a chunk of msg to the builder to get the final msg */
+static bool drm_dp_sideband_append_payload(struct drm_dp_sideband_msg_rx *msg,
+					   u8 *replybuf, u8 replybuflen)
+{
+	u8 crc4;
 
-		/* copy the bytes for the remainder of this header chunk */
-		msg->curchunk_idx = min(msg->curchunk_len, (u8)(replybuflen - hdrlen));
-		memcpy(&msg->chunk[0], replybuf + hdrlen, msg->curchunk_idx);
-	} else {
-		memcpy(&msg->chunk[msg->curchunk_idx], replybuf, replybuflen);
-		msg->curchunk_idx += replybuflen;
-	}
+	memcpy(&msg->chunk[msg->curchunk_idx], replybuf, replybuflen);
+	msg->curchunk_idx += replybuflen;
 
 	if (msg->curchunk_idx >= msg->curchunk_len) {
 		/* do CRC */
@@ -1060,13 +1055,12 @@ static void build_link_address(struct drm_dp_sideband_msg_tx *msg)
 	drm_dp_encode_sideband_req(&req, msg);
 }
 
-static int build_clear_payload_id_table(struct drm_dp_sideband_msg_tx *msg)
+static void build_clear_payload_id_table(struct drm_dp_sideband_msg_tx *msg)
 {
 	struct drm_dp_sideband_msg_req_body req;
 
 	req.req_type = DP_CLEAR_PAYLOAD_ID_TABLE;
 	drm_dp_encode_sideband_req(&req, msg);
-	return 0;
 }
 
 static int build_enum_path_resources(struct drm_dp_sideband_msg_tx *msg,
@@ -1203,16 +1197,8 @@ static int drm_dp_mst_wait_tx_reply(struct drm_dp_mst_branch *mstb,
 
 		/* remove from q */
 		if (txmsg->state == DRM_DP_SIDEBAND_TX_QUEUED ||
-		    txmsg->state == DRM_DP_SIDEBAND_TX_START_SEND) {
+		    txmsg->state == DRM_DP_SIDEBAND_TX_START_SEND)
 			list_del(&txmsg->next);
-		}
-
-		if (txmsg->state == DRM_DP_SIDEBAND_TX_START_SEND ||
-		    txmsg->state == DRM_DP_SIDEBAND_TX_SENT) {
-			mstb->tx_slots[txmsg->seqno] = NULL;
-		}
-		mgr->is_waiting_for_dwn_reply = false;
-
 	}
 out:
 	if (unlikely(ret == -EIO) && drm_debug_enabled(DRM_UT_DP)) {
@@ -2691,22 +2677,6 @@ static int set_hdr_from_dst_qlock(struct drm_dp_sideband_msg_hdr *hdr,
 	struct drm_dp_mst_branch *mstb = txmsg->dst;
 	u8 req_type;
 
-	/* both msg slots are full */
-	if (txmsg->seqno == -1) {
-		if (mstb->tx_slots[0] && mstb->tx_slots[1]) {
-			DRM_DEBUG_KMS("%s: failed to find slot\n", __func__);
-			return -EAGAIN;
-		}
-		if (mstb->tx_slots[0] == NULL && mstb->tx_slots[1] == NULL) {
-			txmsg->seqno = mstb->last_seqno;
-			mstb->last_seqno ^= 1;
-		} else if (mstb->tx_slots[0] == NULL)
-			txmsg->seqno = 0;
-		else
-			txmsg->seqno = 1;
-		mstb->tx_slots[txmsg->seqno] = txmsg;
-	}
-
 	req_type = txmsg->msg[0] & 0x7f;
 	if (req_type == DP_CONNECTION_STATUS_NOTIFY ||
 		req_type == DP_RESOURCE_STATUS_NOTIFY)
@@ -2718,7 +2688,7 @@ static int set_hdr_from_dst_qlock(struct drm_dp_sideband_msg_hdr *hdr,
 	hdr->lcr = mstb->lct - 1;
 	if (mstb->lct > 1)
 		memcpy(hdr->rad, mstb->rad, mstb->lct / 2);
-	hdr->seqno = txmsg->seqno;
+
 	return 0;
 }
 /*
@@ -2733,15 +2703,15 @@ static int process_single_tx_qlock(struct drm_dp_mst_topology_mgr *mgr,
 	int len, space, idx, tosend;
 	int ret;
 
+	if (txmsg->state == DRM_DP_SIDEBAND_TX_SENT)
+		return 0;
+
 	memset(&hdr, 0, sizeof(struct drm_dp_sideband_msg_hdr));
 
-	if (txmsg->state == DRM_DP_SIDEBAND_TX_QUEUED) {
-		txmsg->seqno = -1;
+	if (txmsg->state == DRM_DP_SIDEBAND_TX_QUEUED)
 		txmsg->state = DRM_DP_SIDEBAND_TX_START_SEND;
-	}
 
-	/* make hdr from dst mst - for replies use seqno
-	   otherwise assign one */
+	/* make hdr from dst mst */
 	ret = set_hdr_from_dst_qlock(&hdr, txmsg);
 	if (ret < 0)
 		return ret;
@@ -2794,42 +2764,17 @@ static void process_single_down_tx_qlock(struct drm_dp_mst_topology_mgr *mgr)
 	if (list_empty(&mgr->tx_msg_downq))
 		return;
 
-	txmsg = list_first_entry(&mgr->tx_msg_downq, struct drm_dp_sideband_msg_tx, next);
+	txmsg = list_first_entry(&mgr->tx_msg_downq,
+				 struct drm_dp_sideband_msg_tx, next);
 	ret = process_single_tx_qlock(mgr, txmsg, false);
-	if (ret == 1) {
-		/* txmsg is sent it should be in the slots now */
-		mgr->is_waiting_for_dwn_reply = true;
-		list_del(&txmsg->next);
-	} else if (ret) {
+	if (ret < 0) {
 		DRM_DEBUG_KMS("failed to send msg in q %d\n", ret);
-		mgr->is_waiting_for_dwn_reply = false;
 		list_del(&txmsg->next);
-		if (txmsg->seqno != -1)
-			txmsg->dst->tx_slots[txmsg->seqno] = NULL;
 		txmsg->state = DRM_DP_SIDEBAND_TX_TIMEOUT;
 		wake_up_all(&mgr->tx_waitq);
 	}
 }
 
-/* called holding qlock */
-static void process_single_up_tx_qlock(struct drm_dp_mst_topology_mgr *mgr,
-				       struct drm_dp_sideband_msg_tx *txmsg)
-{
-	int ret;
-
-	/* construct a chunk from the first msg in the tx_msg queue */
-	ret = process_single_tx_qlock(mgr, txmsg, true);
-
-	if (ret != 1)
-		DRM_DEBUG_KMS("failed to send msg in q %d\n", ret);
-
-	if (txmsg->seqno != -1) {
-		WARN_ON((unsigned int)txmsg->seqno >
-			ARRAY_SIZE(txmsg->dst->tx_slots));
-		txmsg->dst->tx_slots[txmsg->seqno] = NULL;
-	}
-}
-
 static void drm_dp_queue_down_tx(struct drm_dp_mst_topology_mgr *mgr,
 				 struct drm_dp_sideband_msg_tx *txmsg)
 {
@@ -2842,8 +2787,7 @@ static void drm_dp_queue_down_tx(struct drm_dp_mst_topology_mgr *mgr,
 		drm_dp_mst_dump_sideband_msg_tx(&p, txmsg);
 	}
 
-	if (list_is_singular(&mgr->tx_msg_downq) &&
-	    !mgr->is_waiting_for_dwn_reply)
+	if (list_is_singular(&mgr->tx_msg_downq))
 		process_single_down_tx_qlock(mgr);
 	mutex_unlock(&mgr->qlock);
 }
@@ -3442,8 +3386,12 @@ static int drm_dp_send_dpcd_write(struct drm_dp_mst_topology_mgr *mgr,
 	drm_dp_queue_down_tx(mgr, txmsg);
 
 	ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
-	if (ret > 0 && txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK)
-		ret = -EIO;
+	if (ret > 0) {
+		if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK)
+			ret = -EIO;
+		else
+			ret = size;
+	}
 
 	kfree(txmsg);
 fail_put:
@@ -3463,7 +3411,7 @@ static int drm_dp_encode_up_ack_reply(struct drm_dp_sideband_msg_tx *msg, u8 req
 
 static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr,
 				    struct drm_dp_mst_branch *mstb,
-				    int req_type, int seqno, bool broadcast)
+				    int req_type, bool broadcast)
 {
 	struct drm_dp_sideband_msg_tx *txmsg;
 
@@ -3472,13 +3420,11 @@ static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr,
 		return -ENOMEM;
 
 	txmsg->dst = mstb;
-	txmsg->seqno = seqno;
 	drm_dp_encode_up_ack_reply(txmsg, req_type);
 
 	mutex_lock(&mgr->qlock);
-
-	process_single_up_tx_qlock(mgr, txmsg);
-
+	/* construct a chunk from the first msg in the tx_msg queue */
+	process_single_tx_qlock(mgr, txmsg, true);
 	mutex_unlock(&mgr->qlock);
 
 	kfree(txmsg);
@@ -3703,31 +3649,63 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr,
 }
 EXPORT_SYMBOL(drm_dp_mst_topology_mgr_resume);
 
-static bool drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up)
+static bool
+drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up,
+		      struct drm_dp_mst_branch **mstb)
 {
 	int len;
 	u8 replyblock[32];
 	int replylen, curreply;
 	int ret;
-	struct drm_dp_sideband_msg_rx *msg;
-	int basereg = up ? DP_SIDEBAND_MSG_UP_REQ_BASE : DP_SIDEBAND_MSG_DOWN_REP_BASE;
-	msg = up ? &mgr->up_req_recv : &mgr->down_rep_recv;
+	u8 hdrlen;
+	struct drm_dp_sideband_msg_hdr hdr;
+	struct drm_dp_sideband_msg_rx *msg =
+		up ? &mgr->up_req_recv : &mgr->down_rep_recv;
+	int basereg = up ? DP_SIDEBAND_MSG_UP_REQ_BASE :
+			   DP_SIDEBAND_MSG_DOWN_REP_BASE;
+
+	if (!up)
+		*mstb = NULL;
 
 	len = min(mgr->max_dpcd_transaction_bytes, 16);
-	ret = drm_dp_dpcd_read(mgr->aux, basereg,
-			       replyblock, len);
+	ret = drm_dp_dpcd_read(mgr->aux, basereg, replyblock, len);
 	if (ret != len) {
 		DRM_DEBUG_KMS("failed to read DPCD down rep %d %d\n", len, ret);
 		return false;
 	}
-	ret = drm_dp_sideband_msg_build(msg, replyblock, len, true);
+
+	ret = drm_dp_decode_sideband_msg_hdr(&hdr, replyblock, len, &hdrlen);
+	if (ret == false) {
+		print_hex_dump(KERN_DEBUG, "failed hdr", DUMP_PREFIX_NONE, 16,
+			       1, replyblock, len, false);
+		DRM_DEBUG_KMS("ERROR: failed header\n");
+		return false;
+	}
+
+	if (!up) {
+		/* Caller is responsible for giving back this reference */
+		*mstb = drm_dp_get_mst_branch_device(mgr, hdr.lct, hdr.rad);
+		if (!*mstb) {
+			DRM_DEBUG_KMS("Got MST reply from unknown device %d\n",
+				      hdr.lct);
+			return false;
+		}
+	}
+
+	if (!drm_dp_sideband_msg_set_header(msg, &hdr, hdrlen)) {
+		DRM_DEBUG_KMS("sideband msg set header failed %d\n",
+			      replyblock[0]);
+		return false;
+	}
+
+	replylen = min(msg->curchunk_len, (u8)(len - hdrlen));
+	ret = drm_dp_sideband_append_payload(msg, replyblock + hdrlen, replylen);
 	if (!ret) {
 		DRM_DEBUG_KMS("sideband msg build failed %d\n", replyblock[0]);
 		return false;
 	}
-	replylen = msg->curchunk_len + msg->curchunk_hdrlen;
 
-	replylen -= len;
+	replylen = msg->curchunk_len + msg->curchunk_hdrlen - len;
 	curreply = len;
 	while (replylen > 0) {
 		len = min3(replylen, mgr->max_dpcd_transaction_bytes, 16);
@@ -3739,7 +3717,7 @@ static bool drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up)
 			return false;
 		}
 
-		ret = drm_dp_sideband_msg_build(msg, replyblock, len, false);
+		ret = drm_dp_sideband_append_payload(msg, replyblock, len);
 		if (!ret) {
 			DRM_DEBUG_KMS("failed to build sideband msg\n");
 			return false;
@@ -3754,67 +3732,60 @@ static bool drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up)
 static int drm_dp_mst_handle_down_rep(struct drm_dp_mst_topology_mgr *mgr)
 {
 	struct drm_dp_sideband_msg_tx *txmsg;
-	struct drm_dp_mst_branch *mstb;
-	struct drm_dp_sideband_msg_hdr *hdr = &mgr->down_rep_recv.initial_hdr;
-	int slot = -1;
-
-	if (!drm_dp_get_one_sb_msg(mgr, false))
-		goto clear_down_rep_recv;
+	struct drm_dp_mst_branch *mstb = NULL;
+	struct drm_dp_sideband_msg_rx *msg = &mgr->down_rep_recv;
 
-	if (!mgr->down_rep_recv.have_eomt)
-		return 0;
+	if (!drm_dp_get_one_sb_msg(mgr, false, &mstb))
+		goto out;
 
-	mstb = drm_dp_get_mst_branch_device(mgr, hdr->lct, hdr->rad);
-	if (!mstb) {
-		DRM_DEBUG_KMS("Got MST reply from unknown device %d\n",
-			      hdr->lct);
-		goto clear_down_rep_recv;
-	}
+	/* Multi-packet message transmission, don't clear the reply */
+	if (!msg->have_eomt)
+		goto out;
 
 	/* find the message */
-	slot = hdr->seqno;
 	mutex_lock(&mgr->qlock);
-	txmsg = mstb->tx_slots[slot];
-	/* remove from slots */
+	txmsg = list_first_entry_or_null(&mgr->tx_msg_downq,
+					 struct drm_dp_sideband_msg_tx, next);
 	mutex_unlock(&mgr->qlock);
 
-	if (!txmsg) {
+	/* Were we actually expecting a response, and from this mstb? */
+	if (!txmsg || txmsg->dst != mstb) {
+		struct drm_dp_sideband_msg_hdr *hdr;
+		hdr = &msg->initial_hdr;
 		DRM_DEBUG_KMS("Got MST reply with no msg %p %d %d %02x %02x\n",
 			      mstb, hdr->seqno, hdr->lct, hdr->rad[0],
-			      mgr->down_rep_recv.msg[0]);
-		goto no_msg;
+			      msg->msg[0]);
+		goto out_clear_reply;
 	}
 
-	drm_dp_sideband_parse_reply(&mgr->down_rep_recv, &txmsg->reply);
+	drm_dp_sideband_parse_reply(msg, &txmsg->reply);
 
-	if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK)
+	if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) {
 		DRM_DEBUG_KMS("Got NAK reply: req 0x%02x (%s), reason 0x%02x (%s), nak data 0x%02x\n",
 			      txmsg->reply.req_type,
 			      drm_dp_mst_req_type_str(txmsg->reply.req_type),
 			      txmsg->reply.u.nak.reason,
 			      drm_dp_mst_nak_reason_str(txmsg->reply.u.nak.reason),
 			      txmsg->reply.u.nak.nak_data);
+	}
 
-	memset(&mgr->down_rep_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
+	memset(msg, 0, sizeof(struct drm_dp_sideband_msg_rx));
 	drm_dp_mst_topology_put_mstb(mstb);
 
 	mutex_lock(&mgr->qlock);
 	txmsg->state = DRM_DP_SIDEBAND_TX_RX;
-	mstb->tx_slots[slot] = NULL;
-	mgr->is_waiting_for_dwn_reply = false;
+	list_del(&txmsg->next);
 	mutex_unlock(&mgr->qlock);
 
 	wake_up_all(&mgr->tx_waitq);
 
 	return 0;
 
-no_msg:
-	drm_dp_mst_topology_put_mstb(mstb);
-clear_down_rep_recv:
-	mutex_lock(&mgr->qlock);
-	mgr->is_waiting_for_dwn_reply = false;
-	mutex_unlock(&mgr->qlock);
-	memset(&mgr->down_rep_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
+out_clear_reply:
+	memset(msg, 0, sizeof(struct drm_dp_sideband_msg_rx));
+out:
+	if (mstb)
+		drm_dp_mst_topology_put_mstb(mstb);
 
 	return 0;
 }
@@ -3890,11 +3861,9 @@ static void drm_dp_mst_up_req_work(struct work_struct *work)
 
 static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
 {
-	struct drm_dp_sideband_msg_hdr *hdr = &mgr->up_req_recv.initial_hdr;
 	struct drm_dp_pending_up_req *up_req;
-	bool seqno;
 
-	if (!drm_dp_get_one_sb_msg(mgr, true))
+	if (!drm_dp_get_one_sb_msg(mgr, true, NULL))
 		goto out;
 
 	if (!mgr->up_req_recv.have_eomt)
@@ -3907,7 +3876,6 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
 	}
 	INIT_LIST_HEAD(&up_req->next);
 
-	seqno = hdr->seqno;
 	drm_dp_sideband_parse_req(&mgr->up_req_recv, &up_req->msg);
 
 	if (up_req->msg.req_type != DP_CONNECTION_STATUS_NOTIFY &&
@@ -3919,7 +3887,7 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
 	}
 
 	drm_dp_send_up_ack_reply(mgr, mgr->mst_primary, up_req->msg.req_type,
-				 seqno, false);
+				 false);
 
 	if (up_req->msg.req_type == DP_CONNECTION_STATUS_NOTIFY) {
 		const struct drm_dp_connection_status_notify *conn_stat =
@@ -3941,7 +3909,7 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
 			      res_stat->available_pbn);
 	}
 
-	up_req->hdr = *hdr;
+	up_req->hdr = mgr->up_req_recv.initial_hdr;
 	mutex_lock(&mgr->up_req_lock);
 	list_add_tail(&up_req->next, &mgr->up_req_list);
 	mutex_unlock(&mgr->up_req_lock);
@@ -4046,27 +4014,6 @@ drm_dp_mst_detect_port(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_dp_mst_detect_port);
 
-/**
- * drm_dp_mst_port_has_audio() - Check whether port has audio capability or not
- * @mgr: manager for this port
- * @port: unverified pointer to a port.
- *
- * This returns whether the port supports audio or not.
- */
-bool drm_dp_mst_port_has_audio(struct drm_dp_mst_topology_mgr *mgr,
-					struct drm_dp_mst_port *port)
-{
-	bool ret = false;
-
-	port = drm_dp_mst_topology_get_port_validated(mgr, port);
-	if (!port)
-		return ret;
-	ret = port->has_audio;
-	drm_dp_mst_topology_put_port(port);
-	return ret;
-}
-EXPORT_SYMBOL(drm_dp_mst_port_has_audio);
-
 /**
  * drm_dp_mst_get_edid() - get EDID for an MST port
  * @connector: toplevel connector to get EDID for
@@ -4444,42 +4391,58 @@ static int drm_dp_dpcd_write_payload(struct drm_dp_mst_topology_mgr *mgr,
 	return ret;
 }
 
+static int do_get_act_status(struct drm_dp_aux *aux)
+{
+	int ret;
+	u8 status;
+
+	ret = drm_dp_dpcd_readb(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	return status;
+}
 
 /**
- * drm_dp_check_act_status() - Check ACT handled status.
+ * drm_dp_check_act_status() - Polls for ACT handled status.
  * @mgr: manager to use
  *
- * Check the payload status bits in the DPCD for ACT handled completion.
+ * Tries waiting for the MST hub to finish updating it's payload table by
+ * polling for the ACT handled bit for up to 3 seconds (yes-some hubs really
+ * take that long).
+ *
+ * Returns:
+ * 0 if the ACT was handled in time, negative error code on failure.
  */
 int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr)
 {
-	u8 status;
-	int ret;
-	int count = 0;
-
-	do {
-		ret = drm_dp_dpcd_readb(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status);
-
-		if (ret < 0) {
-			DRM_DEBUG_KMS("failed to read payload table status %d\n", ret);
-			goto fail;
-		}
-
-		if (status & DP_PAYLOAD_ACT_HANDLED)
-			break;
-		count++;
-		udelay(100);
-
-	} while (count < 30);
-
-	if (!(status & DP_PAYLOAD_ACT_HANDLED)) {
-		DRM_DEBUG_KMS("failed to get ACT bit %d after %d retries\n", status, count);
-		ret = -EINVAL;
-		goto fail;
+	/*
+	 * There doesn't seem to be any recommended retry count or timeout in
+	 * the MST specification. Since some hubs have been observed to take
+	 * over 1 second to update their payload allocations under certain
+	 * conditions, we use a rather large timeout value.
+	 */
+	const int timeout_ms = 3000;
+	int ret, status;
+
+	ret = readx_poll_timeout(do_get_act_status, mgr->aux, status,
+				 status & DP_PAYLOAD_ACT_HANDLED || status < 0,
+				 200, timeout_ms * USEC_PER_MSEC);
+	if (ret < 0 && status >= 0) {
+		DRM_ERROR("Failed to get ACT after %dms, last status: %02x\n",
+			  timeout_ms, status);
+		return -EINVAL;
+	} else if (status < 0) {
+		/*
+		 * Failure here isn't unexpected - the hub may have
+		 * just been unplugged
+		 */
+		DRM_DEBUG_KMS("Failed to read payload table status: %d\n",
+			      status);
+		return status;
 	}
+
 	return 0;
-fail:
-	return ret;
 }
 EXPORT_SYMBOL(drm_dp_check_act_status);
 
@@ -4670,28 +4633,18 @@ static void drm_dp_tx_work(struct work_struct *work)
 	struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, tx_work);
 
 	mutex_lock(&mgr->qlock);
-	if (!list_empty(&mgr->tx_msg_downq) && !mgr->is_waiting_for_dwn_reply)
+	if (!list_empty(&mgr->tx_msg_downq))
 		process_single_down_tx_qlock(mgr);
 	mutex_unlock(&mgr->qlock);
 }
 
-static inline void drm_dp_destroy_connector(struct drm_dp_mst_port *port)
+static inline void
+drm_dp_delayed_destroy_port(struct drm_dp_mst_port *port)
 {
-	if (!port->connector)
-		return;
-
-	if (port->mgr->cbs->destroy_connector) {
-		port->mgr->cbs->destroy_connector(port->mgr, port->connector);
-	} else {
+	if (port->connector) {
 		drm_connector_unregister(port->connector);
 		drm_connector_put(port->connector);
 	}
-}
-
-static inline void
-drm_dp_delayed_destroy_port(struct drm_dp_mst_port *port)
-{
-	drm_dp_destroy_connector(port);
 
 	drm_dp_port_set_pdt(port, DP_PEER_DEVICE_NONE, port->mcs);
 	drm_dp_mst_put_port_malloc(port);
@@ -4701,26 +4654,25 @@ static inline void
 drm_dp_delayed_destroy_mstb(struct drm_dp_mst_branch *mstb)
 {
 	struct drm_dp_mst_topology_mgr *mgr = mstb->mgr;
-	struct drm_dp_mst_port *port, *tmp;
+	struct drm_dp_mst_port *port, *port_tmp;
+	struct drm_dp_sideband_msg_tx *txmsg, *txmsg_tmp;
 	bool wake_tx = false;
 
 	mutex_lock(&mgr->lock);
-	list_for_each_entry_safe(port, tmp, &mstb->ports, next) {
+	list_for_each_entry_safe(port, port_tmp, &mstb->ports, next) {
 		list_del(&port->next);
 		drm_dp_mst_topology_put_port(port);
 	}
 	mutex_unlock(&mgr->lock);
 
-	/* drop any tx slots msg */
+	/* drop any tx slot msg */
 	mutex_lock(&mstb->mgr->qlock);
-	if (mstb->tx_slots[0]) {
-		mstb->tx_slots[0]->state = DRM_DP_SIDEBAND_TX_TIMEOUT;
-		mstb->tx_slots[0] = NULL;
-		wake_tx = true;
-	}
-	if (mstb->tx_slots[1]) {
-		mstb->tx_slots[1]->state = DRM_DP_SIDEBAND_TX_TIMEOUT;
-		mstb->tx_slots[1] = NULL;
+	list_for_each_entry_safe(txmsg, txmsg_tmp, &mgr->tx_msg_downq, next) {
+		if (txmsg->dst != mstb)
+			continue;
+
+		txmsg->state = DRM_DP_SIDEBAND_TX_TIMEOUT;
+		list_del(&txmsg->next);
 		wake_tx = true;
 	}
 	mutex_unlock(&mstb->mgr->qlock);
@@ -5495,7 +5447,7 @@ struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port)
 {
 	struct drm_dp_mst_port *immediate_upstream_port;
 	struct drm_dp_mst_port *fec_port;
-	struct drm_dp_desc desc = { 0 };
+	struct drm_dp_desc desc = { };
 	u8 endpoint_fec;
 	u8 endpoint_dsc;
 
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 7b1a628d1f6e..bc38322f306e 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -39,6 +39,7 @@
 #include <drm/drm_color_mgmt.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_file.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_mode_object.h>
 #include <drm/drm_print.h>
 
@@ -92,13 +93,27 @@ static struct drm_minor **drm_minor_get_slot(struct drm_device *dev,
 	}
 }
 
+static void drm_minor_alloc_release(struct drm_device *dev, void *data)
+{
+	struct drm_minor *minor = data;
+	unsigned long flags;
+
+	WARN_ON(dev != minor->dev);
+
+	put_device(minor->kdev);
+
+	spin_lock_irqsave(&drm_minor_lock, flags);
+	idr_remove(&drm_minors_idr, minor->index);
+	spin_unlock_irqrestore(&drm_minor_lock, flags);
+}
+
 static int drm_minor_alloc(struct drm_device *dev, unsigned int type)
 {
 	struct drm_minor *minor;
 	unsigned long flags;
 	int r;
 
-	minor = kzalloc(sizeof(*minor), GFP_KERNEL);
+	minor = drmm_kzalloc(dev, sizeof(*minor), GFP_KERNEL);
 	if (!minor)
 		return -ENOMEM;
 
@@ -116,46 +131,20 @@ static int drm_minor_alloc(struct drm_device *dev, unsigned int type)
 	idr_preload_end();
 
 	if (r < 0)
-		goto err_free;
+		return r;
 
 	minor->index = r;
 
+	r = drmm_add_action_or_reset(dev, drm_minor_alloc_release, minor);
+	if (r)
+		return r;
+
 	minor->kdev = drm_sysfs_minor_alloc(minor);
-	if (IS_ERR(minor->kdev)) {
-		r = PTR_ERR(minor->kdev);
-		goto err_index;
-	}
+	if (IS_ERR(minor->kdev))
+		return PTR_ERR(minor->kdev);
 
 	*drm_minor_get_slot(dev, type) = minor;
 	return 0;
-
-err_index:
-	spin_lock_irqsave(&drm_minor_lock, flags);
-	idr_remove(&drm_minors_idr, minor->index);
-	spin_unlock_irqrestore(&drm_minor_lock, flags);
-err_free:
-	kfree(minor);
-	return r;
-}
-
-static void drm_minor_free(struct drm_device *dev, unsigned int type)
-{
-	struct drm_minor **slot, *minor;
-	unsigned long flags;
-
-	slot = drm_minor_get_slot(dev, type);
-	minor = *slot;
-	if (!minor)
-		return;
-
-	put_device(minor->kdev);
-
-	spin_lock_irqsave(&drm_minor_lock, flags);
-	idr_remove(&drm_minors_idr, minor->index);
-	spin_unlock_irqrestore(&drm_minor_lock, flags);
-
-	kfree(minor);
-	*slot = NULL;
 }
 
 static int drm_minor_register(struct drm_device *dev, unsigned int type)
@@ -270,17 +259,22 @@ void drm_minor_release(struct drm_minor *minor)
  * any other resources allocated at device initialization and drop the driver's
  * reference to &drm_device using drm_dev_put().
  *
- * Note that the lifetime rules for &drm_device instance has still a lot of
- * historical baggage. Hence use the reference counting provided by
- * drm_dev_get() and drm_dev_put() only carefully.
+ * Note that any allocation or resource which is visible to userspace must be
+ * released only when the final drm_dev_put() is called, and not when the
+ * driver is unbound from the underlying physical struct &device. Best to use
+ * &drm_device managed resources with drmm_add_action(), drmm_kmalloc() and
+ * related functions.
+ *
+ * devres managed resources like devm_kmalloc() can only be used for resources
+ * directly related to the underlying hardware device, and only used in code
+ * paths fully protected by drm_dev_enter() and drm_dev_exit().
  *
  * Display driver example
  * ~~~~~~~~~~~~~~~~~~~~~~
  *
  * The following example shows a typical structure of a DRM display driver.
  * The example focus on the probe() function and the other functions that is
- * almost always present and serves as a demonstration of devm_drm_dev_init()
- * usage with its accompanying drm_driver->release callback.
+ * almost always present and serves as a demonstration of devm_drm_dev_init().
  *
  * .. code-block:: c
  *
@@ -290,19 +284,8 @@ void drm_minor_release(struct drm_minor *minor)
  *		struct clk *pclk;
  *	};
  *
- *	static void driver_drm_release(struct drm_device *drm)
- *	{
- *		struct driver_device *priv = container_of(...);
- *
- *		drm_mode_config_cleanup(drm);
- *		drm_dev_fini(drm);
- *		kfree(priv->userspace_facing);
- *		kfree(priv);
- *	}
- *
  *	static struct drm_driver driver_drm_driver = {
  *		[...]
- *		.release = driver_drm_release,
  *	};
  *
  *	static int driver_probe(struct platform_device *pdev)
@@ -322,13 +305,16 @@ void drm_minor_release(struct drm_minor *minor)
  *
  *		ret = devm_drm_dev_init(&pdev->dev, drm, &driver_drm_driver);
  *		if (ret) {
- *			kfree(drm);
+ *			kfree(priv);
  *			return ret;
  *		}
+ *		drmm_add_final_kfree(drm, priv);
  *
- *		drm_mode_config_init(drm);
+ *		ret = drmm_mode_config_init(drm);
+ *		if (ret)
+ *			return ret;
  *
- *		priv->userspace_facing = kzalloc(..., GFP_KERNEL);
+ *		priv->userspace_facing = drmm_kzalloc(..., GFP_KERNEL);
  *		if (!priv->userspace_facing)
  *			return -ENOMEM;
  *
@@ -580,6 +566,23 @@ static void drm_fs_inode_free(struct inode *inode)
  *    used.
  */
 
+static void drm_dev_init_release(struct drm_device *dev, void *res)
+{
+	drm_legacy_ctxbitmap_cleanup(dev);
+	drm_legacy_remove_map_hash(dev);
+	drm_fs_inode_free(dev->anon_inode);
+
+	put_device(dev->dev);
+	/* Prevent use-after-free in drm_managed_release when debugging is
+	 * enabled. Slightly awkward, but can't really be helped. */
+	dev->dev = NULL;
+	mutex_destroy(&dev->master_mutex);
+	mutex_destroy(&dev->clientlist_mutex);
+	mutex_destroy(&dev->filelist_mutex);
+	mutex_destroy(&dev->struct_mutex);
+	drm_legacy_destroy_members(dev);
+}
+
 /**
  * drm_dev_init - Initialise new DRM device
  * @dev: DRM device
@@ -608,6 +611,9 @@ static void drm_fs_inode_free(struct inode *inode)
  * arbitrary offset, you must supply a &drm_driver.release callback and control
  * the finalization explicitly.
  *
+ * Note that drivers must call drmm_add_final_kfree() after this function has
+ * completed successfully.
+ *
  * RETURNS:
  * 0 on success, or error code on failure.
  */
@@ -629,6 +635,9 @@ int drm_dev_init(struct drm_device *dev,
 	dev->dev = get_device(parent);
 	dev->driver = driver;
 
+	INIT_LIST_HEAD(&dev->managed.resources);
+	spin_lock_init(&dev->managed.lock);
+
 	/* no per-device feature limits by default */
 	dev->driver_features = ~0u;
 
@@ -644,26 +653,30 @@ int drm_dev_init(struct drm_device *dev,
 	mutex_init(&dev->clientlist_mutex);
 	mutex_init(&dev->master_mutex);
 
+	ret = drmm_add_action(dev, drm_dev_init_release, NULL);
+	if (ret)
+		return ret;
+
 	dev->anon_inode = drm_fs_inode_new();
 	if (IS_ERR(dev->anon_inode)) {
 		ret = PTR_ERR(dev->anon_inode);
 		DRM_ERROR("Cannot allocate anonymous inode: %d\n", ret);
-		goto err_free;
+		goto err;
 	}
 
 	if (drm_core_check_feature(dev, DRIVER_RENDER)) {
 		ret = drm_minor_alloc(dev, DRM_MINOR_RENDER);
 		if (ret)
-			goto err_minors;
+			goto err;
 	}
 
 	ret = drm_minor_alloc(dev, DRM_MINOR_PRIMARY);
 	if (ret)
-		goto err_minors;
+		goto err;
 
 	ret = drm_legacy_create_map_hash(dev);
 	if (ret)
-		goto err_minors;
+		goto err;
 
 	drm_legacy_ctxbitmap_init(dev);
 
@@ -671,33 +684,19 @@ int drm_dev_init(struct drm_device *dev,
 		ret = drm_gem_init(dev);
 		if (ret) {
 			DRM_ERROR("Cannot initialize graphics execution manager (GEM)\n");
-			goto err_ctxbitmap;
+			goto err;
 		}
 	}
 
 	ret = drm_dev_set_unique(dev, dev_name(parent));
 	if (ret)
-		goto err_setunique;
+		goto err;
 
 	return 0;
 
-err_setunique:
-	if (drm_core_check_feature(dev, DRIVER_GEM))
-		drm_gem_destroy(dev);
-err_ctxbitmap:
-	drm_legacy_ctxbitmap_cleanup(dev);
-	drm_legacy_remove_map_hash(dev);
-err_minors:
-	drm_minor_free(dev, DRM_MINOR_PRIMARY);
-	drm_minor_free(dev, DRM_MINOR_RENDER);
-	drm_fs_inode_free(dev->anon_inode);
-err_free:
-	put_device(dev->dev);
-	mutex_destroy(&dev->master_mutex);
-	mutex_destroy(&dev->clientlist_mutex);
-	mutex_destroy(&dev->filelist_mutex);
-	mutex_destroy(&dev->struct_mutex);
-	drm_legacy_destroy_members(dev);
+err:
+	drm_managed_release(dev);
+
 	return ret;
 }
 EXPORT_SYMBOL(drm_dev_init);
@@ -714,8 +713,10 @@ static void devm_drm_dev_init_release(void *data)
  * @driver: DRM driver
  *
  * Managed drm_dev_init(). The DRM device initialized with this function is
- * automatically put on driver detach using drm_dev_put(). You must supply a
- * &drm_driver.release callback to control the finalization explicitly.
+ * automatically put on driver detach using drm_dev_put().
+ *
+ * Note that drivers must call drmm_add_final_kfree() after this function has
+ * completed successfully.
  *
  * RETURNS:
  * 0 on success, or error code on failure.
@@ -726,9 +727,6 @@ int devm_drm_dev_init(struct device *parent,
 {
 	int ret;
 
-	if (WARN_ON(!driver->release))
-		return -EINVAL;
-
 	ret = drm_dev_init(dev, driver, parent);
 	if (ret)
 		return ret;
@@ -741,42 +739,28 @@ int devm_drm_dev_init(struct device *parent,
 }
 EXPORT_SYMBOL(devm_drm_dev_init);
 
-/**
- * drm_dev_fini - Finalize a dead DRM device
- * @dev: DRM device
- *
- * Finalize a dead DRM device. This is the converse to drm_dev_init() and
- * frees up all data allocated by it. All driver private data should be
- * finalized first. Note that this function does not free the @dev, that is
- * left to the caller.
- *
- * The ref-count of @dev must be zero, and drm_dev_fini() should only be called
- * from a &drm_driver.release callback.
- */
-void drm_dev_fini(struct drm_device *dev)
+void *__devm_drm_dev_alloc(struct device *parent, struct drm_driver *driver,
+			   size_t size, size_t offset)
 {
-	drm_vblank_cleanup(dev);
-
-	if (drm_core_check_feature(dev, DRIVER_GEM))
-		drm_gem_destroy(dev);
-
-	drm_legacy_ctxbitmap_cleanup(dev);
-	drm_legacy_remove_map_hash(dev);
-	drm_fs_inode_free(dev->anon_inode);
+	void *container;
+	struct drm_device *drm;
+	int ret;
 
-	drm_minor_free(dev, DRM_MINOR_PRIMARY);
-	drm_minor_free(dev, DRM_MINOR_RENDER);
+	container = kzalloc(size, GFP_KERNEL);
+	if (!container)
+		return ERR_PTR(-ENOMEM);
 
-	put_device(dev->dev);
+	drm = container + offset;
+	ret = devm_drm_dev_init(parent, drm, driver);
+	if (ret) {
+		kfree(container);
+		return ERR_PTR(ret);
+	}
+	drmm_add_final_kfree(drm, container);
 
-	mutex_destroy(&dev->master_mutex);
-	mutex_destroy(&dev->clientlist_mutex);
-	mutex_destroy(&dev->filelist_mutex);
-	mutex_destroy(&dev->struct_mutex);
-	drm_legacy_destroy_members(dev);
-	kfree(dev->unique);
+	return container;
 }
-EXPORT_SYMBOL(drm_dev_fini);
+EXPORT_SYMBOL(__devm_drm_dev_alloc);
 
 /**
  * drm_dev_alloc - Allocate new DRM device
@@ -816,6 +800,8 @@ struct drm_device *drm_dev_alloc(struct drm_driver *driver,
 		return ERR_PTR(ret);
 	}
 
+	drmm_add_final_kfree(dev, dev);
+
 	return dev;
 }
 EXPORT_SYMBOL(drm_dev_alloc);
@@ -824,12 +810,13 @@ static void drm_dev_release(struct kref *ref)
 {
 	struct drm_device *dev = container_of(ref, struct drm_device, ref);
 
-	if (dev->driver->release) {
+	if (dev->driver->release)
 		dev->driver->release(dev);
-	} else {
-		drm_dev_fini(dev);
-		kfree(dev);
-	}
+
+	drm_managed_release(dev);
+
+	if (dev->managed.final_kfree)
+		kfree(dev->managed.final_kfree);
 }
 
 /**
@@ -946,6 +933,11 @@ int drm_dev_register(struct drm_device *dev, unsigned long flags)
 	struct drm_driver *driver = dev->driver;
 	int ret;
 
+	if (!driver->load)
+		drm_mode_config_validate(dev);
+
+	WARN_ON(!dev->managed.final_kfree);
+
 	if (drm_dev_needs_global_mutex(dev))
 		mutex_lock(&drm_global_mutex);
 
@@ -1046,8 +1038,8 @@ EXPORT_SYMBOL(drm_dev_unregister);
  */
 int drm_dev_set_unique(struct drm_device *dev, const char *name)
 {
-	kfree(dev->unique);
-	dev->unique = kstrdup(name, GFP_KERNEL);
+	drmm_kfree(dev, dev->unique);
+	dev->unique = drmm_kstrdup(dev, name, GFP_KERNEL);
 
 	return dev->unique ? 0 : -ENOMEM;
 }
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 116451101426..5cee5c0b3e13 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1583,8 +1583,6 @@ module_param_named(edid_fixup, edid_fixup, int, 0400);
 MODULE_PARM_DESC(edid_fixup,
 		 "Minimum number of valid EDID header bytes (0-8, default 6)");
 
-static void drm_get_displayid(struct drm_connector *connector,
-			      struct edid *edid);
 static int validate_displayid(u8 *displayid, int length, int idx);
 
 static int drm_edid_block_checksum(const u8 *raw_edid)
@@ -2018,18 +2016,13 @@ EXPORT_SYMBOL(drm_probe_ddc);
 struct edid *drm_get_edid(struct drm_connector *connector,
 			  struct i2c_adapter *adapter)
 {
-	struct edid *edid;
-
 	if (connector->force == DRM_FORCE_OFF)
 		return NULL;
 
 	if (connector->force == DRM_FORCE_UNSPECIFIED && !drm_probe_ddc(adapter))
 		return NULL;
 
-	edid = drm_do_get_edid(connector, drm_do_probe_ddc_edid, adapter);
-	if (edid)
-		drm_get_displayid(connector, edid);
-	return edid;
+	return drm_do_get_edid(connector, drm_do_probe_ddc_edid, adapter);
 }
 EXPORT_SYMBOL(drm_get_edid);
 
@@ -2387,6 +2380,14 @@ bad_std_timing(u8 a, u8 b)
 	       (a == 0x20 && b == 0x20);
 }
 
+static int drm_mode_hsync(const struct drm_display_mode *mode)
+{
+	if (mode->htotal <= 0)
+		return 0;
+
+	return DIV_ROUND_CLOSEST(mode->clock, mode->htotal);
+}
+
 /**
  * drm_mode_std - convert standard mode info (width, height, refresh) into mode
  * @connector: connector of for the EDID block
@@ -3212,16 +3213,33 @@ static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id)
 }
 
 
-static u8 *drm_find_displayid_extension(const struct edid *edid)
+static u8 *drm_find_displayid_extension(const struct edid *edid,
+					int *length, int *idx)
 {
-	return drm_find_edid_extension(edid, DISPLAYID_EXT);
+	u8 *displayid = drm_find_edid_extension(edid, DISPLAYID_EXT);
+	struct displayid_hdr *base;
+	int ret;
+
+	if (!displayid)
+		return NULL;
+
+	/* EDID extensions block checksum isn't for us */
+	*length = EDID_LENGTH - 1;
+	*idx = 1;
+
+	ret = validate_displayid(displayid, *length, *idx);
+	if (ret)
+		return NULL;
+
+	base = (struct displayid_hdr *)&displayid[*idx];
+	*length = *idx + sizeof(*base) + base->bytes;
+
+	return displayid;
 }
 
 static u8 *drm_find_cea_extension(const struct edid *edid)
 {
-	int ret;
-	int idx = 1;
-	int length = EDID_LENGTH;
+	int length, idx;
 	struct displayid_block *block;
 	u8 *cea;
 	u8 *displayid;
@@ -3232,14 +3250,10 @@ static u8 *drm_find_cea_extension(const struct edid *edid)
 		return cea;
 
 	/* CEA blocks can also be found embedded in a DisplayID block */
-	displayid = drm_find_displayid_extension(edid);
+	displayid = drm_find_displayid_extension(edid, &length, &idx);
 	if (!displayid)
 		return NULL;
 
-	ret = validate_displayid(displayid, length, idx);
-	if (ret)
-		return NULL;
-
 	idx += sizeof(struct displayid_hdr);
 	for_each_displayid_db(displayid, block, idx, length) {
 		if (block->tag == DATA_BLOCK_CTA) {
@@ -5084,7 +5098,7 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
 
 static int validate_displayid(u8 *displayid, int length, int idx)
 {
-	int i;
+	int i, dispid_length;
 	u8 csum = 0;
 	struct displayid_hdr *base;
 
@@ -5093,15 +5107,18 @@ static int validate_displayid(u8 *displayid, int length, int idx)
 	DRM_DEBUG_KMS("base revision 0x%x, length %d, %d %d\n",
 		      base->rev, base->bytes, base->prod_id, base->ext_count);
 
-	if (base->bytes + 5 > length - idx)
+	/* +1 for DispID checksum */
+	dispid_length = sizeof(*base) + base->bytes + 1;
+	if (dispid_length > length - idx)
 		return -EINVAL;
-	for (i = idx; i <= base->bytes + 5; i++) {
-		csum += displayid[i];
-	}
+
+	for (i = 0; i < dispid_length; i++)
+		csum += displayid[idx + i];
 	if (csum) {
 		DRM_NOTE("DisplayID checksum invalid, remainder is %d\n", csum);
 		return -EINVAL;
 	}
+
 	return 0;
 }
 
@@ -5111,7 +5128,7 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
 	struct drm_display_mode *mode;
 	unsigned pixel_clock = (timings->pixel_clock[0] |
 				(timings->pixel_clock[1] << 8) |
-				(timings->pixel_clock[2] << 16));
+				(timings->pixel_clock[2] << 16)) + 1;
 	unsigned hactive = (timings->hactive[0] | timings->hactive[1] << 8) + 1;
 	unsigned hblank = (timings->hblank[0] | timings->hblank[1] << 8) + 1;
 	unsigned hsync = (timings->hsync[0] | (timings->hsync[1] & 0x7f) << 8) + 1;
@@ -5180,20 +5197,14 @@ static int add_displayid_detailed_modes(struct drm_connector *connector,
 					struct edid *edid)
 {
 	u8 *displayid;
-	int ret;
-	int idx = 1;
-	int length = EDID_LENGTH;
+	int length, idx;
 	struct displayid_block *block;
 	int num_modes = 0;
 
-	displayid = drm_find_displayid_extension(edid);
+	displayid = drm_find_displayid_extension(edid, &length, &idx);
 	if (!displayid)
 		return 0;
 
-	ret = validate_displayid(displayid, length, idx);
-	if (ret)
-		return 0;
-
 	idx += sizeof(struct displayid_hdr);
 	for_each_displayid_db(displayid, block, idx, length) {
 		switch (block->tag) {
@@ -5782,9 +5793,9 @@ drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 EXPORT_SYMBOL(drm_hdmi_vendor_infoframe_from_display_mode);
 
 static int drm_parse_tiled_block(struct drm_connector *connector,
-				 struct displayid_block *block)
+				 const struct displayid_block *block)
 {
-	struct displayid_tiled_block *tile = (struct displayid_tiled_block *)block;
+	const struct displayid_tiled_block *tile = (struct displayid_tiled_block *)block;
 	u16 w, h;
 	u8 tile_v_loc, tile_h_loc;
 	u8 num_v_tile, num_h_tile;
@@ -5835,22 +5846,12 @@ static int drm_parse_tiled_block(struct drm_connector *connector,
 	return 0;
 }
 
-static int drm_parse_display_id(struct drm_connector *connector,
-				u8 *displayid, int length,
-				bool is_edid_extension)
+static int drm_displayid_parse_tiled(struct drm_connector *connector,
+				     const u8 *displayid, int length, int idx)
 {
-	/* if this is an EDID extension the first byte will be 0x70 */
-	int idx = 0;
-	struct displayid_block *block;
+	const struct displayid_block *block;
 	int ret;
 
-	if (is_edid_extension)
-		idx = 1;
-
-	ret = validate_displayid(displayid, length, idx);
-	if (ret)
-		return ret;
-
 	idx += sizeof(struct displayid_hdr);
 	for_each_displayid_db(displayid, block, idx, length) {
 		DRM_DEBUG_KMS("block id 0x%x, rev %d, len %d\n",
@@ -5862,12 +5863,6 @@ static int drm_parse_display_id(struct drm_connector *connector,
 			if (ret)
 				return ret;
 			break;
-		case DATA_BLOCK_TYPE_1_DETAILED_TIMING:
-			/* handled in mode gathering code. */
-			break;
-		case DATA_BLOCK_CTA:
-			/* handled in the cea parser code. */
-			break;
 		default:
 			DRM_DEBUG_KMS("found DisplayID tag 0x%x, unhandled\n", block->tag);
 			break;
@@ -5876,19 +5871,21 @@ static int drm_parse_display_id(struct drm_connector *connector,
 	return 0;
 }
 
-static void drm_get_displayid(struct drm_connector *connector,
-			      struct edid *edid)
+void drm_update_tile_info(struct drm_connector *connector,
+			  const struct edid *edid)
 {
-	void *displayid = NULL;
+	const void *displayid = NULL;
+	int length, idx;
 	int ret;
+
 	connector->has_tile = false;
-	displayid = drm_find_displayid_extension(edid);
+	displayid = drm_find_displayid_extension(edid, &length, &idx);
 	if (!displayid) {
 		/* drop reference to any tile group we had */
 		goto out_drop_ref;
 	}
 
-	ret = drm_parse_display_id(connector, displayid, EDID_LENGTH, true);
+	ret = drm_displayid_parse_tiled(connector, displayid, length, idx);
 	if (ret < 0)
 		goto out_drop_ref;
 	if (!connector->has_tile)
diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c
index 9801c0333eca..cb2349ad338d 100644
--- a/drivers/gpu/drm/drm_fb_cma_helper.c
+++ b/drivers/gpu/drm/drm_fb_cma_helper.c
@@ -2,7 +2,7 @@
 /*
  * drm kms/fb cma (contiguous memory allocator) helper functions
  *
- * Copyright (C) 2012 Analog Device Inc.
+ * Copyright (C) 2012 Analog Devices Inc.
  *   Author: Lars-Peter Clausen <lars@metafoo.de>
  *
  * Based on udl_fbdev.c
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index a9771de4d17e..02fc24026872 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -514,6 +514,14 @@ struct fb_info *drm_fb_helper_alloc_fbi(struct drm_fb_helper *fb_helper)
 	if (ret)
 		goto err_release;
 
+	/*
+	 * TODO: We really should be smarter here and alloc an apperture
+	 * for each IORESOURCE_MEM resource helper->dev->dev has and also
+	 * init the ranges of the appertures based on the resources.
+	 * Note some drivers currently count on there being only 1 empty
+	 * aperture and fill this themselves, these will need to be dealt
+	 * with somehow when fixing this.
+	 */
 	info->apertures = alloc_apertures(1);
 	if (!info->apertures) {
 		ret = -ENOMEM;
@@ -2162,6 +2170,8 @@ static const struct drm_client_funcs drm_fbdev_client_funcs = {
  *
  * This function sets up generic fbdev emulation for drivers that supports
  * dumb buffers with a virtual address and that can be mmap'ed.
+ * drm_fbdev_generic_setup() shall be called after the DRM driver registered
+ * the new DRM device with drm_dev_register().
  *
  * Restore, hotplug events and teardown are all taken care of. Drivers that do
  * suspend/resume need to call drm_fb_helper_set_suspend_unlocked() themselves.
@@ -2178,29 +2188,30 @@ static const struct drm_client_funcs drm_fbdev_client_funcs = {
  * Setup will be retried on the next hotplug event.
  *
  * The fbdev is destroyed by drm_dev_unregister().
- *
- * Returns:
- * Zero on success or negative error code on failure.
  */
-int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)
+void drm_fbdev_generic_setup(struct drm_device *dev,
+			     unsigned int preferred_bpp)
 {
 	struct drm_fb_helper *fb_helper;
 	int ret;
 
-	WARN(dev->fb_helper, "fb_helper is already set!\n");
+	drm_WARN(dev, !dev->registered, "Device has not been registered.\n");
+	drm_WARN(dev, dev->fb_helper, "fb_helper is already set!\n");
 
 	if (!drm_fbdev_emulation)
-		return 0;
+		return;
 
 	fb_helper = kzalloc(sizeof(*fb_helper), GFP_KERNEL);
-	if (!fb_helper)
-		return -ENOMEM;
+	if (!fb_helper) {
+		drm_err(dev, "Failed to allocate fb_helper\n");
+		return;
+	}
 
 	ret = drm_client_init(dev, &fb_helper->client, "fbdev", &drm_fbdev_client_funcs);
 	if (ret) {
 		kfree(fb_helper);
 		drm_err(dev, "Failed to register client: %d\n", ret);
-		return ret;
+		return;
 	}
 
 	if (!preferred_bpp)
@@ -2214,8 +2225,6 @@ int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)
 		drm_dbg_kms(dev, "client hotplug ret=%d\n", ret);
 
 	drm_client_register(&fb_helper->client);
-
-	return 0;
 }
 EXPORT_SYMBOL(drm_fbdev_generic_setup);
 
diff --git a/drivers/gpu/drm/drm_file.c b/drivers/gpu/drm/drm_file.c
index eb009d3ab48f..7194e67e78bd 100644
--- a/drivers/gpu/drm/drm_file.c
+++ b/drivers/gpu/drm/drm_file.c
@@ -613,7 +613,8 @@ ssize_t drm_read(struct file *filp, char __user *buffer,
 				file_priv->event_space -= length;
 				list_add(&e->link, &file_priv->event_list);
 				spin_unlock_irq(&dev->event_lock);
-				wake_up_interruptible(&file_priv->event_wait);
+				wake_up_interruptible_poll(&file_priv->event_wait,
+					EPOLLIN | EPOLLRDNORM);
 				break;
 			}
 
@@ -809,7 +810,8 @@ void drm_send_event_locked(struct drm_device *dev, struct drm_pending_event *e)
 	list_del(&e->pending_link);
 	list_add_tail(&e->link,
 		      &e->file_priv->event_list);
-	wake_up_interruptible(&e->file_priv->event_wait);
+	wake_up_interruptible_poll(&e->file_priv->event_wait,
+		EPOLLIN | EPOLLRDNORM);
 }
 EXPORT_SYMBOL(drm_send_event_locked);
 
diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c
index 57ac94ce9b9e..0375b3d7f8d0 100644
--- a/drivers/gpu/drm/drm_framebuffer.c
+++ b/drivers/gpu/drm/drm_framebuffer.c
@@ -1207,10 +1207,10 @@ static const struct drm_info_list drm_framebuffer_debugfs_list[] = {
 	{ "framebuffer", drm_framebuffer_info, 0 },
 };
 
-int drm_framebuffer_debugfs_init(struct drm_minor *minor)
+void drm_framebuffer_debugfs_init(struct drm_minor *minor)
 {
-	return drm_debugfs_create_files(drm_framebuffer_debugfs_list,
-				ARRAY_SIZE(drm_framebuffer_debugfs_list),
-				minor->debugfs_root, minor);
+	drm_debugfs_create_files(drm_framebuffer_debugfs_list,
+				 ARRAY_SIZE(drm_framebuffer_debugfs_list),
+				 minor->debugfs_root, minor);
 }
 #endif
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 37627d06fb06..7bf628e13023 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -44,6 +44,7 @@
 #include <drm/drm_drv.h>
 #include <drm/drm_file.h>
 #include <drm/drm_gem.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_print.h>
 #include <drm/drm_vma_manager.h>
 
@@ -77,6 +78,12 @@
  * up at a later date, and as our interface with shmfs for memory allocation.
  */
 
+static void
+drm_gem_init_release(struct drm_device *dev, void *ptr)
+{
+	drm_vma_offset_manager_destroy(dev->vma_offset_manager);
+}
+
 /**
  * drm_gem_init - Initialize the GEM device fields
  * @dev: drm_devic structure to initialize
@@ -89,7 +96,8 @@ drm_gem_init(struct drm_device *dev)
 	mutex_init(&dev->object_name_lock);
 	idr_init_base(&dev->object_name_idr, 1);
 
-	vma_offset_manager = kzalloc(sizeof(*vma_offset_manager), GFP_KERNEL);
+	vma_offset_manager = drmm_kzalloc(dev, sizeof(*vma_offset_manager),
+					  GFP_KERNEL);
 	if (!vma_offset_manager) {
 		DRM_ERROR("out of memory\n");
 		return -ENOMEM;
@@ -100,16 +108,7 @@ drm_gem_init(struct drm_device *dev)
 				    DRM_FILE_PAGE_OFFSET_START,
 				    DRM_FILE_PAGE_OFFSET_SIZE);
 
-	return 0;
-}
-
-void
-drm_gem_destroy(struct drm_device *dev)
-{
-
-	drm_vma_offset_manager_destroy(dev->vma_offset_manager);
-	kfree(dev->vma_offset_manager);
-	dev->vma_offset_manager = NULL;
+	return drmm_add_action(dev, drm_gem_init_release, NULL);
 }
 
 /**
@@ -432,7 +431,7 @@ drm_gem_handle_create_tail(struct drm_file *file_priv,
  * drm_gem_handle_create - create a gem handle for an object
  * @file_priv: drm file-private structure to register the handle for
  * @obj: object to register
- * @handlep: pionter to return the created handle to the caller
+ * @handlep: pointer to return the created handle to the caller
  *
  * Create a handle for this object. This adds a handle reference to the object,
  * which includes a regular reference count. Callers will likely want to
diff --git a/drivers/gpu/drm/drm_gem_framebuffer_helper.c b/drivers/gpu/drm/drm_gem_framebuffer_helper.c
index 3a7ace19a902..ccc2c71fa491 100644
--- a/drivers/gpu/drm/drm_gem_framebuffer_helper.c
+++ b/drivers/gpu/drm/drm_gem_framebuffer_helper.c
@@ -21,6 +21,13 @@
 #include <drm/drm_modeset_helper.h>
 #include <drm/drm_simple_kms_helper.h>
 
+#define AFBC_HEADER_SIZE		16
+#define AFBC_TH_LAYOUT_ALIGNMENT	8
+#define AFBC_HDR_ALIGN			64
+#define AFBC_SUPERBLOCK_PIXELS		256
+#define AFBC_SUPERBLOCK_ALIGNMENT	128
+#define AFBC_TH_BODY_START_ALIGNMENT	4096
+
 /**
  * DOC: overview
  *
@@ -54,32 +61,25 @@ struct drm_gem_object *drm_gem_fb_get_obj(struct drm_framebuffer *fb,
 }
 EXPORT_SYMBOL_GPL(drm_gem_fb_get_obj);
 
-static struct drm_framebuffer *
-drm_gem_fb_alloc(struct drm_device *dev,
+static int
+drm_gem_fb_init(struct drm_device *dev,
+		 struct drm_framebuffer *fb,
 		 const struct drm_mode_fb_cmd2 *mode_cmd,
 		 struct drm_gem_object **obj, unsigned int num_planes,
 		 const struct drm_framebuffer_funcs *funcs)
 {
-	struct drm_framebuffer *fb;
 	int ret, i;
 
-	fb = kzalloc(sizeof(*fb), GFP_KERNEL);
-	if (!fb)
-		return ERR_PTR(-ENOMEM);
-
 	drm_helper_mode_fill_fb_struct(dev, fb, mode_cmd);
 
 	for (i = 0; i < num_planes; i++)
 		fb->obj[i] = obj[i];
 
 	ret = drm_framebuffer_init(dev, fb, funcs);
-	if (ret) {
+	if (ret)
 		drm_err(dev, "Failed to init framebuffer: %d\n", ret);
-		kfree(fb);
-		return ERR_PTR(ret);
-	}
 
-	return fb;
+	return ret;
 }
 
 /**
@@ -123,10 +123,13 @@ int drm_gem_fb_create_handle(struct drm_framebuffer *fb, struct drm_file *file,
 EXPORT_SYMBOL(drm_gem_fb_create_handle);
 
 /**
- * drm_gem_fb_create_with_funcs() - Helper function for the
- *                                  &drm_mode_config_funcs.fb_create
- *                                  callback
+ * drm_gem_fb_init_with_funcs() - Helper function for implementing
+ *				  &drm_mode_config_funcs.fb_create
+ *				  callback in cases when the driver
+ *				  allocates a subclass of
+ *				  struct drm_framebuffer
  * @dev: DRM device
+ * @fb: framebuffer object
  * @file: DRM file that holds the GEM handle(s) backing the framebuffer
  * @mode_cmd: Metadata from the userspace framebuffer creation request
  * @funcs: vtable to be used for the new framebuffer object
@@ -134,23 +137,26 @@ EXPORT_SYMBOL(drm_gem_fb_create_handle);
  * This function can be used to set &drm_framebuffer_funcs for drivers that need
  * custom framebuffer callbacks. Use drm_gem_fb_create() if you don't need to
  * change &drm_framebuffer_funcs. The function does buffer size validation.
+ * The buffer size validation is for a general case, though, so users should
+ * pay attention to the checks being appropriate for them or, at least,
+ * non-conflicting.
  *
  * Returns:
- * Pointer to a &drm_framebuffer on success or an error pointer on failure.
+ * Zero or a negative error code.
  */
-struct drm_framebuffer *
-drm_gem_fb_create_with_funcs(struct drm_device *dev, struct drm_file *file,
-			     const struct drm_mode_fb_cmd2 *mode_cmd,
-			     const struct drm_framebuffer_funcs *funcs)
+int drm_gem_fb_init_with_funcs(struct drm_device *dev,
+			       struct drm_framebuffer *fb,
+			       struct drm_file *file,
+			       const struct drm_mode_fb_cmd2 *mode_cmd,
+			       const struct drm_framebuffer_funcs *funcs)
 {
 	const struct drm_format_info *info;
 	struct drm_gem_object *objs[4];
-	struct drm_framebuffer *fb;
 	int ret, i;
 
 	info = drm_get_format_info(dev, mode_cmd);
 	if (!info)
-		return ERR_PTR(-EINVAL);
+		return -EINVAL;
 
 	for (i = 0; i < info->num_planes; i++) {
 		unsigned int width = mode_cmd->width / (i ? info->hsub : 1);
@@ -175,19 +181,55 @@ drm_gem_fb_create_with_funcs(struct drm_device *dev, struct drm_file *file,
 		}
 	}
 
-	fb = drm_gem_fb_alloc(dev, mode_cmd, objs, i, funcs);
-	if (IS_ERR(fb)) {
-		ret = PTR_ERR(fb);
+	ret = drm_gem_fb_init(dev, fb, mode_cmd, objs, i, funcs);
+	if (ret)
 		goto err_gem_object_put;
-	}
 
-	return fb;
+	return 0;
 
 err_gem_object_put:
 	for (i--; i >= 0; i--)
 		drm_gem_object_put_unlocked(objs[i]);
 
-	return ERR_PTR(ret);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(drm_gem_fb_init_with_funcs);
+
+/**
+ * drm_gem_fb_create_with_funcs() - Helper function for the
+ *                                  &drm_mode_config_funcs.fb_create
+ *                                  callback
+ * @dev: DRM device
+ * @file: DRM file that holds the GEM handle(s) backing the framebuffer
+ * @mode_cmd: Metadata from the userspace framebuffer creation request
+ * @funcs: vtable to be used for the new framebuffer object
+ *
+ * This function can be used to set &drm_framebuffer_funcs for drivers that need
+ * custom framebuffer callbacks. Use drm_gem_fb_create() if you don't need to
+ * change &drm_framebuffer_funcs. The function does buffer size validation.
+ *
+ * Returns:
+ * Pointer to a &drm_framebuffer on success or an error pointer on failure.
+ */
+struct drm_framebuffer *
+drm_gem_fb_create_with_funcs(struct drm_device *dev, struct drm_file *file,
+			     const struct drm_mode_fb_cmd2 *mode_cmd,
+			     const struct drm_framebuffer_funcs *funcs)
+{
+	struct drm_framebuffer *fb;
+	int ret;
+
+	fb = kzalloc(sizeof(*fb), GFP_KERNEL);
+	if (!fb)
+		return ERR_PTR(-ENOMEM);
+
+	ret = drm_gem_fb_init_with_funcs(dev, fb, file, mode_cmd, funcs);
+	if (ret) {
+		kfree(fb);
+		return ERR_PTR(ret);
+	}
+
+	return fb;
 }
 EXPORT_SYMBOL_GPL(drm_gem_fb_create_with_funcs);
 
@@ -265,6 +307,132 @@ drm_gem_fb_create_with_dirty(struct drm_device *dev, struct drm_file *file,
 }
 EXPORT_SYMBOL_GPL(drm_gem_fb_create_with_dirty);
 
+static __u32 drm_gem_afbc_get_bpp(struct drm_device *dev,
+				  const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	const struct drm_format_info *info;
+
+	info = drm_get_format_info(dev, mode_cmd);
+
+	/* use whatever a driver has set */
+	if (info->cpp[0])
+		return info->cpp[0] * 8;
+
+	/* guess otherwise */
+	switch (info->format) {
+	case DRM_FORMAT_YUV420_8BIT:
+		return 12;
+	case DRM_FORMAT_YUV420_10BIT:
+		return 15;
+	case DRM_FORMAT_VUY101010:
+		return 30;
+	default:
+		break;
+	}
+
+	/* all attempts failed */
+	return 0;
+}
+
+static int drm_gem_afbc_min_size(struct drm_device *dev,
+				 const struct drm_mode_fb_cmd2 *mode_cmd,
+				 struct drm_afbc_framebuffer *afbc_fb)
+{
+	__u32 n_blocks, w_alignment, h_alignment, hdr_alignment;
+	/* remove bpp when all users properly encode cpp in drm_format_info */
+	__u32 bpp;
+
+	switch (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) {
+	case AFBC_FORMAT_MOD_BLOCK_SIZE_16x16:
+		afbc_fb->block_width = 16;
+		afbc_fb->block_height = 16;
+		break;
+	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8:
+		afbc_fb->block_width = 32;
+		afbc_fb->block_height = 8;
+		break;
+	/* no user exists yet - fall through */
+	case AFBC_FORMAT_MOD_BLOCK_SIZE_64x4:
+	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8_64x4:
+	default:
+		drm_dbg_kms(dev, "Invalid AFBC_FORMAT_MOD_BLOCK_SIZE: %lld.\n",
+			    mode_cmd->modifier[0]
+			    & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK);
+		return -EINVAL;
+	}
+
+	/* tiled header afbc */
+	w_alignment = afbc_fb->block_width;
+	h_alignment = afbc_fb->block_height;
+	hdr_alignment = AFBC_HDR_ALIGN;
+	if (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_TILED) {
+		w_alignment *= AFBC_TH_LAYOUT_ALIGNMENT;
+		h_alignment *= AFBC_TH_LAYOUT_ALIGNMENT;
+		hdr_alignment = AFBC_TH_BODY_START_ALIGNMENT;
+	}
+
+	afbc_fb->aligned_width = ALIGN(mode_cmd->width, w_alignment);
+	afbc_fb->aligned_height = ALIGN(mode_cmd->height, h_alignment);
+	afbc_fb->offset = mode_cmd->offsets[0];
+
+	bpp = drm_gem_afbc_get_bpp(dev, mode_cmd);
+	if (!bpp) {
+		drm_dbg_kms(dev, "Invalid AFBC bpp value: %d\n", bpp);
+		return -EINVAL;
+	}
+
+	n_blocks = (afbc_fb->aligned_width * afbc_fb->aligned_height)
+		   / AFBC_SUPERBLOCK_PIXELS;
+	afbc_fb->afbc_size = ALIGN(n_blocks * AFBC_HEADER_SIZE, hdr_alignment);
+	afbc_fb->afbc_size += n_blocks * ALIGN(bpp * AFBC_SUPERBLOCK_PIXELS / 8,
+					       AFBC_SUPERBLOCK_ALIGNMENT);
+
+	return 0;
+}
+
+/**
+ * drm_gem_fb_afbc_init() - Helper function for drivers using afbc to
+ *			    fill and validate all the afbc-specific
+ *			    struct drm_afbc_framebuffer members
+ *
+ * @dev: DRM device
+ * @afbc_fb: afbc-specific framebuffer
+ * @mode_cmd: Metadata from the userspace framebuffer creation request
+ * @afbc_fb: afbc framebuffer
+ *
+ * This function can be used by drivers which support afbc to complete
+ * the preparation of struct drm_afbc_framebuffer. It must be called after
+ * allocating the said struct and calling drm_gem_fb_init_with_funcs().
+ * It is caller's responsibility to put afbc_fb->base.obj objects in case
+ * the call is unsuccessful.
+ *
+ * Returns:
+ * Zero on success or a negative error value on failure.
+ */
+int drm_gem_fb_afbc_init(struct drm_device *dev,
+			 const struct drm_mode_fb_cmd2 *mode_cmd,
+			 struct drm_afbc_framebuffer *afbc_fb)
+{
+	const struct drm_format_info *info;
+	struct drm_gem_object **objs;
+	int ret;
+
+	objs = afbc_fb->base.obj;
+	info = drm_get_format_info(dev, mode_cmd);
+	if (!info)
+		return -EINVAL;
+
+	ret = drm_gem_afbc_min_size(dev, mode_cmd, afbc_fb);
+	if (ret < 0)
+		return ret;
+
+	if (objs[0]->size < afbc_fb->afbc_size)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(drm_gem_fb_afbc_init);
+
 /**
  * drm_gem_fb_prepare_fb() - Prepare a GEM backed framebuffer
  * @plane: Plane
diff --git a/drivers/gpu/drm/drm_gem_vram_helper.c b/drivers/gpu/drm/drm_gem_vram_helper.c
index 92a11bb42365..8b2d5c945c95 100644
--- a/drivers/gpu/drm/drm_gem_vram_helper.c
+++ b/drivers/gpu/drm/drm_gem_vram_helper.c
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
+#include <linux/module.h>
+
 #include <drm/drm_debugfs.h>
 #include <drm/drm_device.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_file.h>
 #include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_gem_ttm_helper.h>
 #include <drm/drm_gem_vram_helper.h>
 #include <drm/drm_mode.h>
@@ -18,13 +21,93 @@ static const struct drm_gem_object_funcs drm_gem_vram_object_funcs;
 /**
  * DOC: overview
  *
- * This library provides a GEM buffer object that is backed by video RAM
- * (VRAM). It can be used for framebuffer devices with dedicated memory.
+ * This library provides &struct drm_gem_vram_object (GEM VRAM), a GEM
+ * buffer object that is backed by video RAM (VRAM). It can be used for
+ * framebuffer devices with dedicated memory.
  *
  * The data structure &struct drm_vram_mm and its helpers implement a memory
- * manager for simple framebuffer devices with dedicated video memory. Buffer
- * objects are either placed in video RAM or evicted to system memory. The rsp.
- * buffer object is provided by &struct drm_gem_vram_object.
+ * manager for simple framebuffer devices with dedicated video memory. GEM
+ * VRAM buffer objects are either placed in the video memory or remain evicted
+ * to system memory.
+ *
+ * With the GEM interface userspace applications create, manage and destroy
+ * graphics buffers, such as an on-screen framebuffer. GEM does not provide
+ * an implementation of these interfaces. It's up to the DRM driver to
+ * provide an implementation that suits the hardware. If the hardware device
+ * contains dedicated video memory, the DRM driver can use the VRAM helper
+ * library. Each active buffer object is stored in video RAM. Active
+ * buffer are used for drawing the current frame, typically something like
+ * the frame's scanout buffer or the cursor image. If there's no more space
+ * left in VRAM, inactive GEM objects can be moved to system memory.
+ *
+ * The easiest way to use the VRAM helper library is to call
+ * drm_vram_helper_alloc_mm(). The function allocates and initializes an
+ * instance of &struct drm_vram_mm in &struct drm_device.vram_mm . Use
+ * &DRM_GEM_VRAM_DRIVER to initialize &struct drm_driver and
+ * &DRM_VRAM_MM_FILE_OPERATIONS to initialize &struct file_operations;
+ * as illustrated below.
+ *
+ * .. code-block:: c
+ *
+ *	struct file_operations fops ={
+ *		.owner = THIS_MODULE,
+ *		DRM_VRAM_MM_FILE_OPERATION
+ *	};
+ *	struct drm_driver drv = {
+ *		.driver_feature = DRM_ ... ,
+ *		.fops = &fops,
+ *		DRM_GEM_VRAM_DRIVER
+ *	};
+ *
+ *	int init_drm_driver()
+ *	{
+ *		struct drm_device *dev;
+ *		uint64_t vram_base;
+ *		unsigned long vram_size;
+ *		int ret;
+ *
+ *		// setup device, vram base and size
+ *		// ...
+ *
+ *		ret = drm_vram_helper_alloc_mm(dev, vram_base, vram_size);
+ *		if (ret)
+ *			return ret;
+ *		return 0;
+ *	}
+ *
+ * This creates an instance of &struct drm_vram_mm, exports DRM userspace
+ * interfaces for GEM buffer management and initializes file operations to
+ * allow for accessing created GEM buffers. With this setup, the DRM driver
+ * manages an area of video RAM with VRAM MM and provides GEM VRAM objects
+ * to userspace.
+ *
+ * To clean up the VRAM memory management, call drm_vram_helper_release_mm()
+ * in the driver's clean-up code.
+ *
+ * .. code-block:: c
+ *
+ *	void fini_drm_driver()
+ *	{
+ *		struct drm_device *dev = ...;
+ *
+ *		drm_vram_helper_release_mm(dev);
+ *	}
+ *
+ * For drawing or scanout operations, buffer object have to be pinned in video
+ * RAM. Call drm_gem_vram_pin() with &DRM_GEM_VRAM_PL_FLAG_VRAM or
+ * &DRM_GEM_VRAM_PL_FLAG_SYSTEM to pin a buffer object in video RAM or system
+ * memory. Call drm_gem_vram_unpin() to release the pinned object afterwards.
+ *
+ * A buffer object that is pinned in video RAM has a fixed address within that
+ * memory region. Call drm_gem_vram_offset() to retrieve this value. Typically
+ * it's used to program the hardware's scanout engine for framebuffers, set
+ * the cursor overlay's image for a mouse cursor, or use it as input to the
+ * hardware's draing engine.
+ *
+ * To access a buffer object's memory from the DRM driver, call
+ * drm_gem_vram_kmap(). It (optionally) maps the buffer into kernel address
+ * space and returns the memory address. Use drm_gem_vram_kunmap() to
+ * release the mapping.
  */
 
 /*
@@ -670,9 +753,9 @@ EXPORT_SYMBOL(drm_gem_vram_driver_dumb_mmap_offset);
  * @plane:	a DRM plane
  * @new_state:	the plane's new state
  *
- * During plane updates, this function pins the GEM VRAM
- * objects of the plane's new framebuffer to VRAM. Call
- * drm_gem_vram_plane_helper_cleanup_fb() to unpin them.
+ * During plane updates, this function sets the plane's fence and
+ * pins the GEM VRAM objects of the plane's new framebuffer to VRAM.
+ * Call drm_gem_vram_plane_helper_cleanup_fb() to unpin them.
  *
  * Returns:
  *	0 on success, or
@@ -698,6 +781,10 @@ drm_gem_vram_plane_helper_prepare_fb(struct drm_plane *plane,
 			goto err_drm_gem_vram_unpin;
 	}
 
+	ret = drm_gem_fb_prepare_fb(plane, new_state);
+	if (ret)
+		goto err_drm_gem_vram_unpin;
+
 	return 0;
 
 err_drm_gem_vram_unpin:
@@ -1018,7 +1105,6 @@ static struct ttm_bo_driver bo_driver = {
  * struct drm_vram_mm
  */
 
-#if defined(CONFIG_DEBUG_FS)
 static int drm_vram_mm_debugfs(struct seq_file *m, void *data)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
@@ -1035,27 +1121,18 @@ static int drm_vram_mm_debugfs(struct seq_file *m, void *data)
 static const struct drm_info_list drm_vram_mm_debugfs_list[] = {
 	{ "vram-mm", drm_vram_mm_debugfs, 0, NULL },
 };
-#endif
 
 /**
  * drm_vram_mm_debugfs_init() - Register VRAM MM debugfs file.
  *
  * @minor: drm minor device.
  *
- * Returns:
- * 0 on success, or
- * a negative error code otherwise.
  */
-int drm_vram_mm_debugfs_init(struct drm_minor *minor)
+void drm_vram_mm_debugfs_init(struct drm_minor *minor)
 {
-	int ret = 0;
-
-#if defined(CONFIG_DEBUG_FS)
-	ret = drm_debugfs_create_files(drm_vram_mm_debugfs_list,
-				       ARRAY_SIZE(drm_vram_mm_debugfs_list),
-				       minor->debugfs_root, minor);
-#endif
-	return ret;
+	drm_debugfs_create_files(drm_vram_mm_debugfs_list,
+				 ARRAY_SIZE(drm_vram_mm_debugfs_list),
+				 minor->debugfs_root, minor);
 }
 EXPORT_SYMBOL(drm_vram_mm_debugfs_init);
 
@@ -1202,3 +1279,6 @@ drm_vram_helper_mode_valid(struct drm_device *dev,
 	return drm_vram_helper_mode_valid_internal(dev, mode, max_bpp);
 }
 EXPORT_SYMBOL(drm_vram_helper_mode_valid);
+
+MODULE_DESCRIPTION("DRM VRAM memory-management helpers");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/drm_internal.h b/drivers/gpu/drm/drm_internal.h
index 5714a78365ac..2470a352730b 100644
--- a/drivers/gpu/drm/drm_internal.h
+++ b/drivers/gpu/drm/drm_internal.h
@@ -89,9 +89,11 @@ void drm_prime_remove_buf_handle_locked(struct drm_prime_file_private *prime_fpr
 struct drm_minor *drm_minor_acquire(unsigned int minor_id);
 void drm_minor_release(struct drm_minor *minor);
 
+/* drm_managed.c */
+void drm_managed_release(struct drm_device *dev);
+
 /* drm_vblank.c */
 void drm_vblank_disable_and_save(struct drm_device *dev, unsigned int pipe);
-void drm_vblank_cleanup(struct drm_device *dev);
 
 /* IOCTLS */
 int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
@@ -141,7 +143,6 @@ void drm_sysfs_lease_event(struct drm_device *dev);
 /* drm_gem.c */
 struct drm_gem_object;
 int drm_gem_init(struct drm_device *dev);
-void drm_gem_destroy(struct drm_device *dev);
 int drm_gem_handle_create_tail(struct drm_file *file_priv,
 			       struct drm_gem_object *obj,
 			       u32 *handlep);
@@ -235,4 +236,4 @@ int drm_syncobj_query_ioctl(struct drm_device *dev, void *data,
 /* drm_framebuffer.c */
 void drm_framebuffer_print_info(struct drm_printer *p, unsigned int indent,
 				const struct drm_framebuffer *fb);
-int drm_framebuffer_debugfs_init(struct drm_minor *minor);
+void drm_framebuffer_debugfs_init(struct drm_minor *minor);
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index 9e41972c4bbc..328502aafaf7 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -599,8 +599,8 @@ static const struct drm_ioctl_desc drm_ioctls[] = {
 	DRM_LEGACY_IOCTL_DEF(DRM_IOCTL_SET_SAREA_CTX, drm_legacy_setsareactx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
 	DRM_LEGACY_IOCTL_DEF(DRM_IOCTL_GET_SAREA_CTX, drm_legacy_getsareactx, DRM_AUTH),
 
-	DRM_IOCTL_DEF(DRM_IOCTL_SET_MASTER, drm_setmaster_ioctl, DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF(DRM_IOCTL_DROP_MASTER, drm_dropmaster_ioctl, DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF(DRM_IOCTL_SET_MASTER, drm_setmaster_ioctl, 0),
+	DRM_IOCTL_DEF(DRM_IOCTL_DROP_MASTER, drm_dropmaster_ioctl, 0),
 
 	DRM_LEGACY_IOCTL_DEF(DRM_IOCTL_ADD_CTX, drm_legacy_addctx, DRM_AUTH|DRM_ROOT_ONLY),
 	DRM_LEGACY_IOCTL_DEF(DRM_IOCTL_RM_CTX, drm_legacy_rmctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
@@ -741,7 +741,7 @@ static const struct drm_ioctl_desc drm_ioctls[] = {
  *     };
  *
  * Please make sure that you follow all the best practices from
- * ``Documentation/ioctl/botching-up-ioctls.rst``. Note that drm_ioctl()
+ * ``Documentation/process/botching-up-ioctls.rst``. Note that drm_ioctl()
  * automatically zero-extends structures, hence make sure you can add more stuff
  * at the end, i.e. don't put a variable sized array there.
  *
diff --git a/drivers/gpu/drm/drm_managed.c b/drivers/gpu/drm/drm_managed.c
new file mode 100644
index 000000000000..9cebfe370a65
--- /dev/null
+++ b/drivers/gpu/drm/drm_managed.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel
+ *
+ * Based on drivers/base/devres.c
+ */
+
+#include <drm/drm_managed.h>
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <drm/drm_device.h>
+#include <drm/drm_print.h>
+
+/**
+ * DOC: managed resources
+ *
+ * Inspired by struct &device managed resources, but tied to the lifetime of
+ * struct &drm_device, which can outlive the underlying physical device, usually
+ * when userspace has some open files and other handles to resources still open.
+ *
+ * Release actions can be added with drmm_add_action(), memory allocations can
+ * be done directly with drmm_kmalloc() and the related functions. Everything
+ * will be released on the final drm_dev_put() in reverse order of how the
+ * release actions have been added and memory has been allocated since driver
+ * loading started with drm_dev_init().
+ *
+ * Note that release actions and managed memory can also be added and removed
+ * during the lifetime of the driver, all the functions are fully concurrent
+ * safe. But it is recommended to use managed resources only for resources that
+ * change rarely, if ever, during the lifetime of the &drm_device instance.
+ */
+
+struct drmres_node {
+	struct list_head	entry;
+	drmres_release_t	release;
+	const char		*name;
+	size_t			size;
+};
+
+struct drmres {
+	struct drmres_node		node;
+	/*
+	 * Some archs want to perform DMA into kmalloc caches
+	 * and need a guaranteed alignment larger than
+	 * the alignment of a 64-bit integer.
+	 * Thus we use ARCH_KMALLOC_MINALIGN here and get exactly the same
+	 * buffer alignment as if it was allocated by plain kmalloc().
+	 */
+	u8 __aligned(ARCH_KMALLOC_MINALIGN) data[];
+};
+
+static void free_dr(struct drmres *dr)
+{
+	kfree_const(dr->node.name);
+	kfree(dr);
+}
+
+void drm_managed_release(struct drm_device *dev)
+{
+	struct drmres *dr, *tmp;
+
+	drm_dbg_drmres(dev, "drmres release begin\n");
+	list_for_each_entry_safe(dr, tmp, &dev->managed.resources, node.entry) {
+		drm_dbg_drmres(dev, "REL %p %s (%zu bytes)\n",
+			       dr, dr->node.name, dr->node.size);
+
+		if (dr->node.release)
+			dr->node.release(dev, dr->node.size ? *(void **)&dr->data : NULL);
+
+		list_del(&dr->node.entry);
+		free_dr(dr);
+	}
+	drm_dbg_drmres(dev, "drmres release end\n");
+}
+
+/*
+ * Always inline so that kmalloc_track_caller tracks the actual interesting
+ * caller outside of drm_managed.c.
+ */
+static __always_inline struct drmres * alloc_dr(drmres_release_t release,
+						size_t size, gfp_t gfp, int nid)
+{
+	size_t tot_size;
+	struct drmres *dr;
+
+	/* We must catch any near-SIZE_MAX cases that could overflow. */
+	if (unlikely(check_add_overflow(sizeof(*dr), size, &tot_size)))
+		return NULL;
+
+	dr = kmalloc_node_track_caller(tot_size, gfp, nid);
+	if (unlikely(!dr))
+		return NULL;
+
+	memset(dr, 0, offsetof(struct drmres, data));
+
+	INIT_LIST_HEAD(&dr->node.entry);
+	dr->node.release = release;
+	dr->node.size = size;
+
+	return dr;
+}
+
+static void del_dr(struct drm_device *dev, struct drmres *dr)
+{
+	list_del_init(&dr->node.entry);
+
+	drm_dbg_drmres(dev, "DEL %p %s (%lu bytes)\n",
+		       dr, dr->node.name, (unsigned long) dr->node.size);
+}
+
+static void add_dr(struct drm_device *dev, struct drmres *dr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->managed.lock, flags);
+	list_add(&dr->node.entry, &dev->managed.resources);
+	spin_unlock_irqrestore(&dev->managed.lock, flags);
+
+	drm_dbg_drmres(dev, "ADD %p %s (%lu bytes)\n",
+		       dr, dr->node.name, (unsigned long) dr->node.size);
+}
+
+/**
+ * drmm_add_final_kfree - add release action for the final kfree()
+ * @dev: DRM device
+ * @container: pointer to the kmalloc allocation containing @dev
+ *
+ * Since the allocation containing the struct &drm_device must be allocated
+ * before it can be initialized with drm_dev_init() there's no way to allocate
+ * that memory with drmm_kmalloc(). To side-step this chicken-egg problem the
+ * pointer for this final kfree() must be specified by calling this function. It
+ * will be released in the final drm_dev_put() for @dev, after all other release
+ * actions installed through drmm_add_action() have been processed.
+ */
+void drmm_add_final_kfree(struct drm_device *dev, void *container)
+{
+	WARN_ON(dev->managed.final_kfree);
+	WARN_ON(dev < (struct drm_device *) container);
+	WARN_ON(dev + 1 > (struct drm_device *) (container + ksize(container)));
+	dev->managed.final_kfree = container;
+}
+EXPORT_SYMBOL(drmm_add_final_kfree);
+
+int __drmm_add_action(struct drm_device *dev,
+		      drmres_release_t action,
+		      void *data, const char *name)
+{
+	struct drmres *dr;
+	void **void_ptr;
+
+	dr = alloc_dr(action, data ? sizeof(void*) : 0,
+		      GFP_KERNEL | __GFP_ZERO,
+		      dev_to_node(dev->dev));
+	if (!dr) {
+		drm_dbg_drmres(dev, "failed to add action %s for %p\n",
+			       name, data);
+		return -ENOMEM;
+	}
+
+	dr->node.name = kstrdup_const(name, GFP_KERNEL);
+	if (data) {
+		void_ptr = (void **)&dr->data;
+		*void_ptr = data;
+	}
+
+	add_dr(dev, dr);
+
+	return 0;
+}
+EXPORT_SYMBOL(__drmm_add_action);
+
+int __drmm_add_action_or_reset(struct drm_device *dev,
+			       drmres_release_t action,
+			       void *data, const char *name)
+{
+	int ret;
+
+	ret = __drmm_add_action(dev, action, data, name);
+	if (ret)
+		action(dev, data);
+
+	return ret;
+}
+EXPORT_SYMBOL(__drmm_add_action_or_reset);
+
+/**
+ * drmm_kmalloc - &drm_device managed kmalloc()
+ * @dev: DRM device
+ * @size: size of the memory allocation
+ * @gfp: GFP allocation flags
+ *
+ * This is a &drm_device managed version of kmalloc(). The allocated memory is
+ * automatically freed on the final drm_dev_put(). Memory can also be freed
+ * before the final drm_dev_put() by calling drmm_kfree().
+ */
+void *drmm_kmalloc(struct drm_device *dev, size_t size, gfp_t gfp)
+{
+	struct drmres *dr;
+
+	dr = alloc_dr(NULL, size, gfp, dev_to_node(dev->dev));
+	if (!dr) {
+		drm_dbg_drmres(dev, "failed to allocate %zu bytes, %u flags\n",
+			       size, gfp);
+		return NULL;
+	}
+	dr->node.name = kstrdup_const("kmalloc", GFP_KERNEL);
+
+	add_dr(dev, dr);
+
+	return dr->data;
+}
+EXPORT_SYMBOL(drmm_kmalloc);
+
+/**
+ * drmm_kstrdup - &drm_device managed kstrdup()
+ * @dev: DRM device
+ * @s: 0-terminated string to be duplicated
+ * @gfp: GFP allocation flags
+ *
+ * This is a &drm_device managed version of kstrdup(). The allocated memory is
+ * automatically freed on the final drm_dev_put() and works exactly like a
+ * memory allocation obtained by drmm_kmalloc().
+ */
+char *drmm_kstrdup(struct drm_device *dev, const char *s, gfp_t gfp)
+{
+	size_t size;
+	char *buf;
+
+	if (!s)
+		return NULL;
+
+	size = strlen(s) + 1;
+	buf = drmm_kmalloc(dev, size, gfp);
+	if (buf)
+		memcpy(buf, s, size);
+	return buf;
+}
+EXPORT_SYMBOL_GPL(drmm_kstrdup);
+
+/**
+ * drmm_kfree - &drm_device managed kfree()
+ * @dev: DRM device
+ * @data: memory allocation to be freed
+ *
+ * This is a &drm_device managed version of kfree() which can be used to
+ * release memory allocated through drmm_kmalloc() or any of its related
+ * functions before the final drm_dev_put() of @dev.
+ */
+void drmm_kfree(struct drm_device *dev, void *data)
+{
+	struct drmres *dr_match = NULL, *dr;
+	unsigned long flags;
+
+	if (!data)
+		return;
+
+	spin_lock_irqsave(&dev->managed.lock, flags);
+	list_for_each_entry(dr, &dev->managed.resources, node.entry) {
+		if (dr->data == data) {
+			dr_match = dr;
+			del_dr(dev, dr_match);
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&dev->managed.lock, flags);
+
+	if (WARN_ON(!dr_match))
+		return;
+
+	free_dr(dr_match);
+}
+EXPORT_SYMBOL(drmm_kfree);
diff --git a/drivers/gpu/drm/drm_mipi_dbi.c b/drivers/gpu/drm/drm_mipi_dbi.c
index 558baf989f5a..bb27c82757f1 100644
--- a/drivers/gpu/drm/drm_mipi_dbi.c
+++ b/drivers/gpu/drm/drm_mipi_dbi.c
@@ -169,7 +169,8 @@ int mipi_dbi_command_buf(struct mipi_dbi *dbi, u8 cmd, u8 *data, size_t len)
 EXPORT_SYMBOL(mipi_dbi_command_buf);
 
 /* This should only be used by mipi_dbi_command() */
-int mipi_dbi_command_stackbuf(struct mipi_dbi *dbi, u8 cmd, u8 *data, size_t len)
+int mipi_dbi_command_stackbuf(struct mipi_dbi *dbi, u8 cmd, const u8 *data,
+			      size_t len)
 {
 	u8 *buf;
 	int ret;
@@ -510,6 +511,10 @@ int mipi_dbi_dev_init_with_formats(struct mipi_dbi_dev *dbidev,
 	if (!dbidev->dbi.command)
 		return -EINVAL;
 
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ret;
+
 	dbidev->tx_buf = devm_kmalloc(drm->dev, tx_buf_size, GFP_KERNEL);
 	if (!dbidev->tx_buf)
 		return -ENOMEM;
@@ -578,26 +583,6 @@ int mipi_dbi_dev_init(struct mipi_dbi_dev *dbidev,
 }
 EXPORT_SYMBOL(mipi_dbi_dev_init);
 
-/**
- * mipi_dbi_release - DRM driver release helper
- * @drm: DRM device
- *
- * This function finalizes and frees &mipi_dbi.
- *
- * Drivers can use this as their &drm_driver->release callback.
- */
-void mipi_dbi_release(struct drm_device *drm)
-{
-	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(drm);
-
-	DRM_DEBUG_DRIVER("\n");
-
-	drm_mode_config_cleanup(drm);
-	drm_dev_fini(drm);
-	kfree(dbidev);
-}
-EXPORT_SYMBOL(mipi_dbi_release);
-
 /**
  * mipi_dbi_hw_reset - Hardware reset of controller
  * @dbi: MIPI DBI structure
@@ -1308,10 +1293,8 @@ static const struct file_operations mipi_dbi_debugfs_command_fops = {
  * controller or getting the read command values.
  * Drivers can use this as their &drm_driver->debugfs_init callback.
  *
- * Returns:
- * Zero on success, negative error code on failure.
  */
-int mipi_dbi_debugfs_init(struct drm_minor *minor)
+void mipi_dbi_debugfs_init(struct drm_minor *minor)
 {
 	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(minor->dev);
 	umode_t mode = S_IFREG | S_IWUSR;
@@ -1320,8 +1303,6 @@ int mipi_dbi_debugfs_init(struct drm_minor *minor)
 		mode |= S_IRUGO;
 	debugfs_create_file("command", mode, minor->debugfs_root, dbidev,
 			    &mipi_dbi_debugfs_command_fops);
-
-	return 0;
 }
 EXPORT_SYMBOL(mipi_dbi_debugfs_init);
 
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index 08e6eff6a179..5761f838a057 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -25,6 +25,7 @@
 #include <drm/drm_drv.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_file.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_mode_config.h>
 #include <drm/drm_print.h>
 #include <linux/dma-resv.h>
@@ -373,8 +374,14 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
 	return 0;
 }
 
+static void drm_mode_config_init_release(struct drm_device *dev, void *ptr)
+{
+	drm_mode_config_cleanup(dev);
+}
+
 /**
- * drm_mode_config_init - initialize DRM mode_configuration structure
+ * drmm_mode_config_init - managed DRM mode_configuration structure
+ * 	initialization
  * @dev: DRM device
  *
  * Initialize @dev's mode_config structure, used for tracking the graphics
@@ -384,8 +391,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
  * problem, since this should happen single threaded at init time. It is the
  * driver's problem to ensure this guarantee.
  *
+ * Cleanup is automatically handled through registering drm_mode_config_cleanup
+ * with drmm_add_action().
+ *
+ * Returns: 0 on success, negative error value on failure.
  */
-void drm_mode_config_init(struct drm_device *dev)
+int drmm_mode_config_init(struct drm_device *dev)
 {
 	mutex_init(&dev->mode_config.mutex);
 	drm_modeset_lock_init(&dev->mode_config.connection_mutex);
@@ -443,8 +454,11 @@ void drm_mode_config_init(struct drm_device *dev)
 		drm_modeset_acquire_fini(&modeset_ctx);
 		dma_resv_fini(&resv);
 	}
+
+	return drmm_add_action_or_reset(dev, drm_mode_config_init_release,
+					NULL);
 }
-EXPORT_SYMBOL(drm_mode_config_init);
+EXPORT_SYMBOL(drmm_mode_config_init);
 
 /**
  * drm_mode_config_cleanup - free up DRM mode_config info
@@ -456,6 +470,9 @@ EXPORT_SYMBOL(drm_mode_config_init);
  * Note that since this /should/ happen single-threaded at driver/device
  * teardown time, no locking is required. It's the driver's job to ensure that
  * this guarantee actually holds true.
+ *
+ * FIXME: With the managed drmm_mode_config_init() it is no longer necessary for
+ * drivers to explicitly call this function.
  */
 void drm_mode_config_cleanup(struct drm_device *dev)
 {
@@ -532,3 +549,90 @@ void drm_mode_config_cleanup(struct drm_device *dev)
 	drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
 }
 EXPORT_SYMBOL(drm_mode_config_cleanup);
+
+static u32 full_encoder_mask(struct drm_device *dev)
+{
+	struct drm_encoder *encoder;
+	u32 encoder_mask = 0;
+
+	drm_for_each_encoder(encoder, dev)
+		encoder_mask |= drm_encoder_mask(encoder);
+
+	return encoder_mask;
+}
+
+/*
+ * For some reason we want the encoder itself included in
+ * possible_clones. Make life easy for drivers by allowing them
+ * to leave possible_clones unset if no cloning is possible.
+ */
+static void fixup_encoder_possible_clones(struct drm_encoder *encoder)
+{
+	if (encoder->possible_clones == 0)
+		encoder->possible_clones = drm_encoder_mask(encoder);
+}
+
+static void validate_encoder_possible_clones(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	u32 encoder_mask = full_encoder_mask(dev);
+	struct drm_encoder *other;
+
+	drm_for_each_encoder(other, dev) {
+		WARN(!!(encoder->possible_clones & drm_encoder_mask(other)) !=
+		     !!(other->possible_clones & drm_encoder_mask(encoder)),
+		     "possible_clones mismatch: "
+		     "[ENCODER:%d:%s] mask=0x%x possible_clones=0x%x vs. "
+		     "[ENCODER:%d:%s] mask=0x%x possible_clones=0x%x\n",
+		     encoder->base.id, encoder->name,
+		     drm_encoder_mask(encoder), encoder->possible_clones,
+		     other->base.id, other->name,
+		     drm_encoder_mask(other), other->possible_clones);
+	}
+
+	WARN((encoder->possible_clones & drm_encoder_mask(encoder)) == 0 ||
+	     (encoder->possible_clones & ~encoder_mask) != 0,
+	     "Bogus possible_clones: "
+	     "[ENCODER:%d:%s] possible_clones=0x%x (full encoder mask=0x%x)\n",
+	     encoder->base.id, encoder->name,
+	     encoder->possible_clones, encoder_mask);
+}
+
+static u32 full_crtc_mask(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+	u32 crtc_mask = 0;
+
+	drm_for_each_crtc(crtc, dev)
+		crtc_mask |= drm_crtc_mask(crtc);
+
+	return crtc_mask;
+}
+
+static void validate_encoder_possible_crtcs(struct drm_encoder *encoder)
+{
+	u32 crtc_mask = full_crtc_mask(encoder->dev);
+
+	WARN((encoder->possible_crtcs & crtc_mask) == 0 ||
+	     (encoder->possible_crtcs & ~crtc_mask) != 0,
+	     "Bogus possible_crtcs: "
+	     "[ENCODER:%d:%s] possible_crtcs=0x%x (full crtc mask=0x%x)\n",
+	     encoder->base.id, encoder->name,
+	     encoder->possible_crtcs, crtc_mask);
+}
+
+void drm_mode_config_validate(struct drm_device *dev)
+{
+	struct drm_encoder *encoder;
+
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
+	drm_for_each_encoder(encoder, dev)
+		fixup_encoder_possible_clones(encoder);
+
+	drm_for_each_encoder(encoder, dev) {
+		validate_encoder_possible_clones(encoder);
+		validate_encoder_possible_crtcs(encoder);
+	}
+}
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index d4d64518e11b..fec1c33b3045 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -747,32 +747,6 @@ void drm_mode_set_name(struct drm_display_mode *mode)
 }
 EXPORT_SYMBOL(drm_mode_set_name);
 
-/**
- * drm_mode_hsync - get the hsync of a mode
- * @mode: mode
- *
- * Returns:
- * @modes's hsync rate in kHz, rounded to the nearest integer. Calculates the
- * value first if it is not yet set.
- */
-int drm_mode_hsync(const struct drm_display_mode *mode)
-{
-	unsigned int calc_val;
-
-	if (mode->hsync)
-		return mode->hsync;
-
-	if (mode->htotal <= 0)
-		return 0;
-
-	calc_val = (mode->clock * 1000) / mode->htotal; /* hsync in Hz */
-	calc_val += 500;				/* round to 1000Hz */
-	calc_val /= 1000;				/* truncate to kHz */
-
-	return calc_val;
-}
-EXPORT_SYMBOL(drm_mode_hsync);
-
 /**
  * drm_mode_vrefresh - get the vrefresh of a mode
  * @mode: mode
diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
index 81aa21561982..75e2b7053f35 100644
--- a/drivers/gpu/drm/drm_pci.c
+++ b/drivers/gpu/drm/drm_pci.c
@@ -30,12 +30,13 @@
 #include <drm/drm.h>
 #include <drm/drm_agpsupport.h>
 #include <drm/drm_drv.h>
-#include <drm/drm_pci.h>
 #include <drm/drm_print.h>
 
 #include "drm_internal.h"
 #include "drm_legacy.h"
 
+#ifdef CONFIG_DRM_LEGACY
+
 /**
  * drm_pci_alloc - Allocate a PCI consistent memory block, for DMA.
  * @dev: DRM device
@@ -93,6 +94,7 @@ void drm_pci_free(struct drm_device * dev, drm_dma_handle_t * dmah)
 }
 
 EXPORT_SYMBOL(drm_pci_free);
+#endif
 
 static int drm_get_pci_domain(struct drm_device *dev)
 {
diff --git a/drivers/gpu/drm/drm_scatter.c b/drivers/gpu/drm/drm_scatter.c
index ca520028b2cb..f4e6184d1877 100644
--- a/drivers/gpu/drm/drm_scatter.c
+++ b/drivers/gpu/drm/drm_scatter.c
@@ -43,15 +43,6 @@
 
 #define DEBUG_SCATTER 0
 
-static inline void *drm_vmalloc_dma(unsigned long size)
-{
-#if defined(__powerpc__) && defined(CONFIG_NOT_COHERENT_CACHE)
-	return __vmalloc(size, GFP_KERNEL, pgprot_noncached_wc(PAGE_KERNEL));
-#else
-	return vmalloc_32(size);
-#endif
-}
-
 static void drm_sg_cleanup(struct drm_sg_mem * entry)
 {
 	struct page *page;
@@ -126,7 +117,7 @@ int drm_legacy_sg_alloc(struct drm_device *dev, void *data,
 		return -ENOMEM;
 	}
 
-	entry->virtual = drm_vmalloc_dma(pages << PAGE_SHIFT);
+	entry->virtual = vmalloc_32(pages << PAGE_SHIFT);
 	if (!entry->virtual) {
 		kfree(entry->busaddr);
 		kfree(entry->pagelist);
diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
index da7b0b0c1090..758bf74e1cab 100644
--- a/drivers/gpu/drm/drm_vblank.c
+++ b/drivers/gpu/drm/drm_vblank.c
@@ -30,6 +30,7 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_framebuffer.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_modeset_helper_vtables.h>
 #include <drm/drm_print.h>
 #include <drm/drm_vblank.h>
@@ -40,6 +41,69 @@
 /**
  * DOC: vblank handling
  *
+ * From the computer's perspective, every time the monitor displays
+ * a new frame the scanout engine has "scanned out" the display image
+ * from top to bottom, one row of pixels at a time. The current row
+ * of pixels is referred to as the current scanline.
+ *
+ * In addition to the display's visible area, there's usually a couple of
+ * extra scanlines which aren't actually displayed on the screen.
+ * These extra scanlines don't contain image data and are occasionally used
+ * for features like audio and infoframes. The region made up of these
+ * scanlines is referred to as the vertical blanking region, or vblank for
+ * short.
+ *
+ * For historical reference, the vertical blanking period was designed to
+ * give the electron gun (on CRTs) enough time to move back to the top of
+ * the screen to start scanning out the next frame. Similar for horizontal
+ * blanking periods. They were designed to give the electron gun enough
+ * time to move back to the other side of the screen to start scanning the
+ * next scanline.
+ *
+ * ::
+ *
+ *
+ *    physical →   ⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽
+ *    top of      |                                        |
+ *    display     |                                        |
+ *                |               New frame                |
+ *                |                                        |
+ *                |↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓|
+ *                |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| ← Scanline,
+ *                |↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓|   updates the
+ *                |                                        |   frame as it
+ *                |                                        |   travels down
+ *                |                                        |   ("sacn out")
+ *                |               Old frame                |
+ *                |                                        |
+ *                |                                        |
+ *                |                                        |
+ *                |                                        |   physical
+ *                |                                        |   bottom of
+ *    vertical    |⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽| ← display
+ *    blanking    ┆xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx┆
+ *    region   →  ┆xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx┆
+ *                ┆xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx┆
+ *    start of →   ⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽⎽
+ *    new frame
+ *
+ * "Physical top of display" is the reference point for the high-precision/
+ * corrected timestamp.
+ *
+ * On a lot of display hardware, programming needs to take effect during the
+ * vertical blanking period so that settings like gamma, the image buffer
+ * buffer to be scanned out, etc. can safely be changed without showing
+ * any visual artifacts on the screen. In some unforgiving hardware, some of
+ * this programming has to both start and end in the same vblank. To help
+ * with the timing of the hardware programming, an interrupt is usually
+ * available to notify the driver when it can start the updating of registers.
+ * The interrupt is in this context named the vblank interrupt.
+ *
+ * The vblank interrupt may be fired at different points depending on the
+ * hardware. Some hardware implementations will fire the interrupt when the
+ * new frame start, other implementations will fire the interrupt at different
+ * points in time.
+ *
  * Vertical blanking plays a major role in graphics rendering. To achieve
  * tear-free display, users must synchronize page flips and/or rendering to
  * vertical blanking. The DRM API offers ioctls to perform page flips
@@ -425,14 +489,10 @@ static void vblank_disable_fn(struct timer_list *t)
 	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
 }
 
-void drm_vblank_cleanup(struct drm_device *dev)
+static void drm_vblank_init_release(struct drm_device *dev, void *ptr)
 {
 	unsigned int pipe;
 
-	/* Bail if the driver didn't call drm_vblank_init() */
-	if (dev->num_crtcs == 0)
-		return;
-
 	for (pipe = 0; pipe < dev->num_crtcs; pipe++) {
 		struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
 
@@ -441,10 +501,6 @@ void drm_vblank_cleanup(struct drm_device *dev)
 
 		del_timer_sync(&vblank->disable_timer);
 	}
-
-	kfree(dev->vblank);
-
-	dev->num_crtcs = 0;
 }
 
 /**
@@ -453,25 +509,29 @@ void drm_vblank_cleanup(struct drm_device *dev)
  * @num_crtcs: number of CRTCs supported by @dev
  *
  * This function initializes vblank support for @num_crtcs display pipelines.
- * Cleanup is handled by the DRM core, or through calling drm_dev_fini() for
- * drivers with a &drm_driver.release callback.
+ * Cleanup is handled automatically through a cleanup function added with
+ * drmm_add_action().
  *
  * Returns:
  * Zero on success or a negative error code on failure.
  */
 int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs)
 {
-	int ret = -ENOMEM;
+	int ret;
 	unsigned int i;
 
 	spin_lock_init(&dev->vbl_lock);
 	spin_lock_init(&dev->vblank_time_lock);
 
+	dev->vblank = drmm_kcalloc(dev, num_crtcs, sizeof(*dev->vblank), GFP_KERNEL);
+	if (!dev->vblank)
+		return -ENOMEM;
+
 	dev->num_crtcs = num_crtcs;
 
-	dev->vblank = kcalloc(num_crtcs, sizeof(*dev->vblank), GFP_KERNEL);
-	if (!dev->vblank)
-		goto err;
+	ret = drmm_add_action(dev, drm_vblank_init_release, NULL);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < num_crtcs; i++) {
 		struct drm_vblank_crtc *vblank = &dev->vblank[i];
@@ -486,10 +546,6 @@ int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs)
 	DRM_INFO("Supports vblank timestamp caching Rev 2 (21.10.2013).\n");
 
 	return 0;
-
-err:
-	dev->num_crtcs = 0;
-	return ret;
 }
 EXPORT_SYMBOL(drm_vblank_init);
 
diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c
index aa88911bbc06..56197ae0b2f9 100644
--- a/drivers/gpu/drm/drm_vm.c
+++ b/drivers/gpu/drm/drm_vm.c
@@ -595,8 +595,8 @@ static int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma)
 			vma->vm_ops = &drm_vm_ops;
 			break;
 		}
+		fallthrough;	/* to _DRM_FRAME_BUFFER... */
 #endif
-		/* fall through - to _DRM_FRAME_BUFFER... */
 	case _DRM_FRAME_BUFFER:
 	case _DRM_REGISTERS:
 		offset = drm_core_get_reg_ofs(dev);
@@ -621,7 +621,7 @@ static int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma)
 		    vma->vm_end - vma->vm_start, vma->vm_page_prot))
 			return -EAGAIN;
 		vma->vm_page_prot = drm_dma_prot(map->type, vma);
-		/* fall through - to _DRM_SHM */
+		fallthrough;	/* to _DRM_SHM */
 	case _DRM_SHM:
 		vma->vm_ops = &drm_vm_shm_ops;
 		vma->vm_private_data = (void *)map;
diff --git a/drivers/gpu/drm/drm_vram_helper_common.c b/drivers/gpu/drm/drm_vram_helper_common.c
deleted file mode 100644
index 2000d9b33fd5..000000000000
--- a/drivers/gpu/drm/drm_vram_helper_common.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include <linux/module.h>
-
-/**
- * DOC: overview
- *
- * This library provides &struct drm_gem_vram_object (GEM VRAM), a GEM
- * buffer object that is backed by video RAM. It can be used for
- * framebuffer devices with dedicated memory. The video RAM is managed
- * by &struct drm_vram_mm (VRAM MM).
- *
- * With the GEM interface userspace applications create, manage and destroy
- * graphics buffers, such as an on-screen framebuffer. GEM does not provide
- * an implementation of these interfaces. It's up to the DRM driver to
- * provide an implementation that suits the hardware. If the hardware device
- * contains dedicated video memory, the DRM driver can use the VRAM helper
- * library. Each active buffer object is stored in video RAM. Active
- * buffer are used for drawing the current frame, typically something like
- * the frame's scanout buffer or the cursor image. If there's no more space
- * left in VRAM, inactive GEM objects can be moved to system memory.
- *
- * The easiest way to use the VRAM helper library is to call
- * drm_vram_helper_alloc_mm(). The function allocates and initializes an
- * instance of &struct drm_vram_mm in &struct drm_device.vram_mm . Use
- * &DRM_GEM_VRAM_DRIVER to initialize &struct drm_driver and
- * &DRM_VRAM_MM_FILE_OPERATIONS to initialize &struct file_operations;
- * as illustrated below.
- *
- * .. code-block:: c
- *
- *	struct file_operations fops ={
- *		.owner = THIS_MODULE,
- *		DRM_VRAM_MM_FILE_OPERATION
- *	};
- *	struct drm_driver drv = {
- *		.driver_feature = DRM_ ... ,
- *		.fops = &fops,
- *		DRM_GEM_VRAM_DRIVER
- *	};
- *
- *	int init_drm_driver()
- *	{
- *		struct drm_device *dev;
- *		uint64_t vram_base;
- *		unsigned long vram_size;
- *		int ret;
- *
- *		// setup device, vram base and size
- *		// ...
- *
- *		ret = drm_vram_helper_alloc_mm(dev, vram_base, vram_size);
- *		if (ret)
- *			return ret;
- *		return 0;
- *	}
- *
- * This creates an instance of &struct drm_vram_mm, exports DRM userspace
- * interfaces for GEM buffer management and initializes file operations to
- * allow for accessing created GEM buffers. With this setup, the DRM driver
- * manages an area of video RAM with VRAM MM and provides GEM VRAM objects
- * to userspace.
- *
- * To clean up the VRAM memory management, call drm_vram_helper_release_mm()
- * in the driver's clean-up code.
- *
- * .. code-block:: c
- *
- *	void fini_drm_driver()
- *	{
- *		struct drm_device *dev = ...;
- *
- *		drm_vram_helper_release_mm(dev);
- *	}
- *
- * For drawing or scanout operations, buffer object have to be pinned in video
- * RAM. Call drm_gem_vram_pin() with &DRM_GEM_VRAM_PL_FLAG_VRAM or
- * &DRM_GEM_VRAM_PL_FLAG_SYSTEM to pin a buffer object in video RAM or system
- * memory. Call drm_gem_vram_unpin() to release the pinned object afterwards.
- *
- * A buffer object that is pinned in video RAM has a fixed address within that
- * memory region. Call drm_gem_vram_offset() to retrieve this value. Typically
- * it's used to program the hardware's scanout engine for framebuffers, set
- * the cursor overlay's image for a mouse cursor, or use it as input to the
- * hardware's draing engine.
- *
- * To access a buffer object's memory from the DRM driver, call
- * drm_gem_vram_kmap(). It (optionally) maps the buffer into kernel address
- * space and returns the memory address. Use drm_gem_vram_kunmap() to
- * release the mapping.
- */
-
-MODULE_DESCRIPTION("DRM VRAM memory-management helpers");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
index a8685b2e1803..f9afe11c50f0 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
@@ -231,21 +231,11 @@ static struct drm_info_list etnaviv_debugfs_list[] = {
 		{"ring", show_each_gpu, 0, etnaviv_ring_show},
 };
 
-static int etnaviv_debugfs_init(struct drm_minor *minor)
+static void etnaviv_debugfs_init(struct drm_minor *minor)
 {
-	struct drm_device *dev = minor->dev;
-	int ret;
-
-	ret = drm_debugfs_create_files(etnaviv_debugfs_list,
-			ARRAY_SIZE(etnaviv_debugfs_list),
-			minor->debugfs_root, minor);
-
-	if (ret) {
-		dev_err(dev->dev, "could not install etnaviv_debugfs_list\n");
-		return ret;
-	}
-
-	return ret;
+	drm_debugfs_create_files(etnaviv_debugfs_list,
+				 ARRAY_SIZE(etnaviv_debugfs_list),
+				 minor->debugfs_root, minor);
 }
 #endif
 
@@ -736,7 +726,7 @@ static void __exit etnaviv_exit(void)
 module_exit(etnaviv_exit);
 
 MODULE_AUTHOR("Christian Gmeiner <christian.gmeiner@gmail.com>");
-MODULE_AUTHOR("Russell King <rmk+kernel@arm.linux.org.uk>");
+MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
 MODULE_AUTHOR("Lucas Stach <l.stach@pengutronix.de>");
 MODULE_DESCRIPTION("etnaviv DRM Driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_dump.c b/drivers/gpu/drm/etnaviv/etnaviv_dump.c
index 648cf0207309..706af0304ca4 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_dump.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_dump.c
@@ -154,8 +154,8 @@ void etnaviv_core_dump(struct etnaviv_gem_submit *submit)
 	file_size += sizeof(*iter.hdr) * n_obj;
 
 	/* Allocate the file in vmalloc memory, it's likely to be big */
-	iter.start = __vmalloc(file_size, GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY,
-			       PAGE_KERNEL);
+	iter.start = __vmalloc(file_size, GFP_KERNEL | __GFP_NOWARN |
+			__GFP_NORETRY);
 	if (!iter.start) {
 		mutex_unlock(&gpu->mmu_context->lock);
 		dev_warn(gpu->dev, "failed to allocate devcoredump file\n");
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 5ee090691390..9ac51b6ab34b 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -25,6 +25,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 #include <drm/exynos_drm.h>
 
 #include "exynos_drm_crtc.h"
@@ -135,10 +136,6 @@ static const struct drm_encoder_helper_funcs exynos_dp_encoder_helper_funcs = {
 	.disable = exynos_dp_nop,
 };
 
-static const struct drm_encoder_funcs exynos_dp_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int exynos_dp_dt_parse_panel(struct exynos_dp_device *dp)
 {
 	int ret;
@@ -167,8 +164,7 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 			return ret;
 	}
 
-	drm_encoder_init(drm_dev, encoder, &exynos_dp_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_TMDS);
 
 	drm_encoder_helper_add(encoder, &exynos_dp_encoder_helper_funcs);
 
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dpi.c b/drivers/gpu/drm/exynos/exynos_drm_dpi.c
index 43fa0f26c052..7ba5354e7d94 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dpi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dpi.c
@@ -14,6 +14,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include <video/of_videomode.h>
 #include <video/videomode.h>
@@ -149,10 +150,6 @@ static const struct drm_encoder_helper_funcs exynos_dpi_encoder_helper_funcs = {
 	.disable = exynos_dpi_disable,
 };
 
-static const struct drm_encoder_funcs exynos_dpi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 enum {
 	FIMD_PORT_IN0,
 	FIMD_PORT_IN1,
@@ -201,8 +198,7 @@ int exynos_dpi_bind(struct drm_device *dev, struct drm_encoder *encoder)
 {
 	int ret;
 
-	drm_encoder_init(dev, encoder, &exynos_dpi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS);
 
 	drm_encoder_helper_add(encoder, &exynos_dpi_encoder_helper_funcs);
 
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index e080aa92338c..902938d2568f 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -30,6 +30,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "exynos_drm_crtc.h"
 #include "exynos_drm_drv.h"
@@ -1523,10 +1524,6 @@ static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = {
 	.disable = exynos_dsi_disable,
 };
 
-static const struct drm_encoder_funcs exynos_dsi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 MODULE_DEVICE_TABLE(of, exynos_dsi_of_match);
 
 static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
@@ -1704,8 +1701,7 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
 	struct drm_bridge *in_bridge;
 	int ret;
 
-	drm_encoder_init(drm_dev, encoder, &exynos_dsi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_TMDS);
 
 	drm_encoder_helper_add(encoder, &exynos_dsi_encoder_helper_funcs);
 
diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c
index b320b3a21ad4..282467121699 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c
@@ -14,6 +14,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 #include <drm/drm_vblank.h>
 #include <drm/exynos_drm.h>
 
@@ -369,10 +370,6 @@ static const struct drm_encoder_helper_funcs exynos_vidi_encoder_helper_funcs =
 	.disable = exynos_vidi_disable,
 };
 
-static const struct drm_encoder_funcs exynos_vidi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int vidi_bind(struct device *dev, struct device *master, void *data)
 {
 	struct vidi_context *ctx = dev_get_drvdata(dev);
@@ -406,8 +403,7 @@ static int vidi_bind(struct device *dev, struct device *master, void *data)
 		return PTR_ERR(ctx->crtc);
 	}
 
-	drm_encoder_init(drm_dev, encoder, &exynos_vidi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_TMDS);
 
 	drm_encoder_helper_add(encoder, &exynos_vidi_encoder_helper_funcs);
 
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index 1a7c828fc41d..95dd399aa9cc 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -38,6 +38,7 @@
 #include <drm/drm_edid.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "exynos_drm_crtc.h"
 #include "regs-hdmi.h"
@@ -1559,10 +1560,6 @@ static const struct drm_encoder_helper_funcs exynos_hdmi_encoder_helper_funcs =
 	.disable	= hdmi_disable,
 };
 
-static const struct drm_encoder_funcs exynos_hdmi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static void hdmi_audio_shutdown(struct device *dev, void *data)
 {
 	struct hdmi_context *hdata = dev_get_drvdata(dev);
@@ -1843,8 +1840,7 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
 
 	hdata->phy_clk.enable = hdmiphy_clk_enable;
 
-	drm_encoder_init(drm_dev, encoder, &exynos_hdmi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_TMDS);
 
 	drm_encoder_helper_add(encoder, &exynos_hdmi_encoder_helper_funcs);
 
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
index cff344367f81..9b0c4736c21a 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
@@ -13,19 +13,11 @@
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "fsl_dcu_drm_drv.h"
 #include "fsl_tcon.h"
 
-static void fsl_dcu_drm_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs encoder_funcs = {
-	.destroy = fsl_dcu_drm_encoder_destroy,
-};
-
 int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev,
 			       struct drm_crtc *crtc)
 {
@@ -38,8 +30,8 @@ int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev,
 	if (fsl_dev->tcon)
 		fsl_tcon_bypass_enable(fsl_dev->tcon);
 
-	ret = drm_encoder_init(fsl_dev->drm, encoder, &encoder_funcs,
-			       DRM_MODE_ENCODER_LVDS, NULL);
+	ret = drm_simple_encoder_init(fsl_dev->drm, encoder,
+				      DRM_MODE_ENCODER_LVDS);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c
index 29c36d63b20e..88535f5aacc5 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_crt.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c
@@ -28,6 +28,8 @@
 #include <linux/i2c.h>
 #include <linux/pm_runtime.h>
 
+#include <drm/drm_simple_kms_helper.h>
+
 #include "cdv_device.h"
 #include "intel_bios.h"
 #include "power.h"
@@ -237,15 +239,6 @@ static const struct drm_connector_helper_funcs
 	.best_encoder = gma_best_encoder,
 };
 
-static void cdv_intel_crt_enc_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs cdv_intel_crt_enc_funcs = {
-	.destroy = cdv_intel_crt_enc_destroy,
-};
-
 void cdv_intel_crt_init(struct drm_device *dev,
 			struct psb_intel_mode_device *mode_dev)
 {
@@ -271,8 +264,7 @@ void cdv_intel_crt_init(struct drm_device *dev,
 		&cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 
 	encoder = &gma_encoder->base;
-	drm_encoder_init(dev, encoder,
-		&cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC, NULL);
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DAC);
 
 	gma_connector_attach_encoder(gma_connector, gma_encoder);
 
diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
index 5772b2dce0d6..f41cbb753bb4 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
@@ -32,6 +32,7 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_dp_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "gma_display.h"
 #include "psb_drv.h"
@@ -1271,37 +1272,8 @@ cdv_intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZ
 	return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
 }
 
-
-#if 0
-static char	*voltage_names[] = {
-	"0.4V", "0.6V", "0.8V", "1.2V"
-};
-static char	*pre_emph_names[] = {
-	"0dB", "3.5dB", "6dB", "9.5dB"
-};
-static char	*link_train_names[] = {
-	"pattern 1", "pattern 2", "idle", "off"
-};
-#endif
-
 #define CDV_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_LEVEL_3
-/*
-static uint8_t
-cdv_intel_dp_pre_emphasis_max(uint8_t voltage_swing)
-{
-	switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
-	case DP_TRAIN_VOLTAGE_SWING_400:
-		return DP_TRAIN_PRE_EMPHASIS_6;
-	case DP_TRAIN_VOLTAGE_SWING_600:
-		return DP_TRAIN_PRE_EMPHASIS_6;
-	case DP_TRAIN_VOLTAGE_SWING_800:
-		return DP_TRAIN_PRE_EMPHASIS_3_5;
-	case DP_TRAIN_VOLTAGE_SWING_1200:
-	default:
-		return DP_TRAIN_PRE_EMPHASIS_0;
-	}
-}
-*/
+
 static void
 cdv_intel_get_adjust_train(struct gma_encoder *encoder)
 {
@@ -1908,11 +1880,6 @@ cdv_intel_dp_destroy(struct drm_connector *connector)
 	kfree(connector);
 }
 
-static void cdv_intel_dp_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
 static const struct drm_encoder_helper_funcs cdv_intel_dp_helper_funcs = {
 	.dpms = cdv_intel_dp_dpms,
 	.mode_fixup = cdv_intel_dp_mode_fixup,
@@ -1935,11 +1902,6 @@ static const struct drm_connector_helper_funcs cdv_intel_dp_connector_helper_fun
 	.best_encoder = gma_best_encoder,
 };
 
-static const struct drm_encoder_funcs cdv_intel_dp_enc_funcs = {
-	.destroy = cdv_intel_dp_encoder_destroy,
-};
-
-
 static void cdv_intel_dp_add_properties(struct drm_connector *connector)
 {
 	cdv_intel_attach_force_audio_property(connector);
@@ -2016,8 +1978,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev
 	encoder = &gma_encoder->base;
 
 	drm_connector_init(dev, connector, &cdv_intel_dp_connector_funcs, type);
-	drm_encoder_init(dev, encoder, &cdv_intel_dp_enc_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS);
 
 	gma_connector_attach_encoder(gma_connector, gma_encoder);
 
@@ -2120,7 +2081,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev
 		if (ret == 0) {
 			/* if this fails, presume the device is a ghost */
 			DRM_INFO("failed to retrieve link info, disabling eDP\n");
-			cdv_intel_dp_encoder_destroy(encoder);
+			drm_encoder_cleanup(encoder);
 			cdv_intel_dp_destroy(connector);
 			goto err_priv;
 		} else {
diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
index 1711a41acc16..0d12c6ffbc40 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
@@ -32,6 +32,7 @@
 #include <drm/drm.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_edid.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "cdv_device.h"
 #include "psb_drv.h"
@@ -311,8 +312,7 @@ void cdv_hdmi_init(struct drm_device *dev,
 			   &cdv_hdmi_connector_funcs,
 			   DRM_MODE_CONNECTOR_DVID);
 
-	drm_encoder_init(dev, encoder, &psb_intel_lvds_enc_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS);
 
 	gma_connector_attach_encoder(gma_connector, gma_encoder);
 	gma_encoder->type = INTEL_OUTPUT_HDMI;
diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
index ea0a5d9a0acc..eaaf4efec217 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -12,6 +12,8 @@
 #include <linux/i2c.h>
 #include <linux/pm_runtime.h>
 
+#include <drm/drm_simple_kms_helper.h>
+
 #include "cdv_device.h"
 #include "intel_bios.h"
 #include "power.h"
@@ -72,89 +74,6 @@ static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev)
 	return retval;
 }
 
-#if 0
-/*
- * Set LVDS backlight level by I2C command
- */
-static int cdv_lvds_i2c_set_brightness(struct drm_device *dev,
-					unsigned int level)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
-	u8 out_buf[2];
-	unsigned int blc_i2c_brightness;
-
-	struct i2c_msg msgs[] = {
-		{
-			.addr = lvds_i2c_bus->slave_addr,
-			.flags = 0,
-			.len = 2,
-			.buf = out_buf,
-		}
-	};
-
-	blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
-			     BRIGHTNESS_MASK /
-			     BRIGHTNESS_MAX_LEVEL);
-
-	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
-		blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
-
-	out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
-	out_buf[1] = (u8)blc_i2c_brightness;
-
-	if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1)
-		return 0;
-
-	DRM_ERROR("I2C transfer error\n");
-	return -1;
-}
-
-
-static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-
-	u32 max_pwm_blc;
-	u32 blc_pwm_duty_cycle;
-
-	max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev);
-
-	/*BLC_PWM_CTL Should be initiated while backlight device init*/
-	BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);
-
-	blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
-
-	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
-		blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
-
-	blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
-	REG_WRITE(BLC_PWM_CTL,
-		  (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
-		  (blc_pwm_duty_cycle));
-
-	return 0;
-}
-
-/*
- * Set LVDS backlight level either by I2C or PWM
- */
-void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-
-	if (!dev_priv->lvds_bl) {
-		DRM_ERROR("NO LVDS Backlight Info\n");
-		return;
-	}
-
-	if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
-		cdv_lvds_i2c_set_brightness(dev, level);
-	else
-		cdv_lvds_pwm_set_brightness(dev, level);
-}
-#endif
-
 /**
  * Sets the backlight level.
  *
@@ -499,16 +418,6 @@ static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = {
 	.destroy = cdv_intel_lvds_destroy,
 };
 
-
-static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
-	.destroy = cdv_intel_lvds_enc_destroy,
-};
-
 /*
  * Enumerate the child dev array parsed from VBT to check whether
  * the LVDS is present.
@@ -616,10 +525,7 @@ void cdv_intel_lvds_init(struct drm_device *dev,
 			   &cdv_intel_lvds_connector_funcs,
 			   DRM_MODE_CONNECTOR_LVDS);
 
-	drm_encoder_init(dev, encoder,
-			 &cdv_intel_lvds_enc_funcs,
-			 DRM_MODE_ENCODER_LVDS, NULL);
-
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS);
 
 	gma_connector_attach_encoder(gma_connector, gma_encoder);
 	gma_encoder->type = INTEL_OUTPUT_LVDS;
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 1d8f67e4795a..23a78d755382 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -577,31 +577,31 @@ static void psb_setup_outputs(struct drm_device *dev)
 			break;
 		case INTEL_OUTPUT_SDVO:
 			crtc_mask = dev_priv->ops->sdvo_mask;
-			clone_mask = (1 << INTEL_OUTPUT_SDVO);
+			clone_mask = 0;
 			break;
 		case INTEL_OUTPUT_LVDS:
-		        crtc_mask = dev_priv->ops->lvds_mask;
-			clone_mask = (1 << INTEL_OUTPUT_LVDS);
+			crtc_mask = dev_priv->ops->lvds_mask;
+			clone_mask = 0;
 			break;
 		case INTEL_OUTPUT_MIPI:
 			crtc_mask = (1 << 0);
-			clone_mask = (1 << INTEL_OUTPUT_MIPI);
+			clone_mask = 0;
 			break;
 		case INTEL_OUTPUT_MIPI2:
 			crtc_mask = (1 << 2);
-			clone_mask = (1 << INTEL_OUTPUT_MIPI2);
+			clone_mask = 0;
 			break;
 		case INTEL_OUTPUT_HDMI:
-		        crtc_mask = dev_priv->ops->hdmi_mask;
+			crtc_mask = dev_priv->ops->hdmi_mask;
 			clone_mask = (1 << INTEL_OUTPUT_HDMI);
 			break;
 		case INTEL_OUTPUT_DISPLAYPORT:
 			crtc_mask = (1 << 0) | (1 << 1);
-			clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
+			clone_mask = 0;
 			break;
 		case INTEL_OUTPUT_EDP:
 			crtc_mask = (1 << 1);
-			clone_mask = (1 << INTEL_OUTPUT_EDP);
+			clone_mask = 0;
 		}
 		encoder->possible_crtcs = crtc_mask;
 		encoder->possible_clones =
diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_dpi.c b/drivers/gpu/drm/gma500/mdfld_dsi_dpi.c
index d4c65f268922..c976a9dd9240 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_dpi.c
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_dpi.c
@@ -27,6 +27,8 @@
 
 #include <linux/delay.h>
 
+#include <drm/drm_simple_kms_helper.h>
+
 #include "mdfld_dsi_dpi.h"
 #include "mdfld_dsi_pkg_sender.h"
 #include "mdfld_output.h"
@@ -993,10 +995,7 @@ struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev,
 	/*create drm encoder object*/
 	connector = &dsi_connector->base.base;
 	encoder = &dpi_output->base.base.base;
-	drm_encoder_init(dev,
-			encoder,
-			p_funcs->encoder_funcs,
-			DRM_MODE_ENCODER_LVDS, NULL);
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS);
 	drm_encoder_helper_add(encoder,
 				p_funcs->encoder_helper_funcs);
 
@@ -1006,10 +1005,10 @@ struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev,
 	/*set possible crtcs and clones*/
 	if (dsi_connector->pipe) {
 		encoder->possible_crtcs = (1 << 2);
-		encoder->possible_clones = (1 << 1);
+		encoder->possible_clones = 0;
 	} else {
 		encoder->possible_crtcs = (1 << 0);
-		encoder->possible_clones = (1 << 0);
+		encoder->possible_clones = 0;
 	}
 
 	dsi_connector->base.encoder = &dpi_output->base.base;
diff --git a/drivers/gpu/drm/gma500/mdfld_intel_display.c b/drivers/gpu/drm/gma500/mdfld_intel_display.c
index 4fff110c4921..aae2d358364c 100644
--- a/drivers/gpu/drm/gma500/mdfld_intel_display.c
+++ b/drivers/gpu/drm/gma500/mdfld_intel_display.c
@@ -658,16 +658,6 @@ static int mdfld_crtc_mode_set(struct drm_crtc *crtc,
 
 	dev_dbg(dev->dev, "pipe = 0x%x\n", pipe);
 
-#if 0
-	if (pipe == 1) {
-		if (!gma_power_begin(dev, true))
-			return 0;
-		android_hdmi_crtc_mode_set(crtc, mode, adjusted_mode,
-			x, y, old_fb);
-		goto mrst_crtc_mode_set_exit;
-	}
-#endif
-
 	ret = check_fb(crtc->primary->fb);
 	if (ret)
 		return ret;
@@ -918,14 +908,6 @@ static int mdfld_crtc_mode_set(struct drm_crtc *crtc,
 		}
 		dpll = 0;
 
-#if 0 /* FIXME revisit later */
-		if (ksel == KSEL_CRYSTAL_19 || ksel == KSEL_BYPASS_19 ||
-						ksel == KSEL_BYPASS_25)
-			dpll &= ~MDFLD_INPUT_REF_SEL;
-		else if (ksel == KSEL_BYPASS_83_100)
-			dpll |= MDFLD_INPUT_REF_SEL;
-#endif /* FIXME revisit later */
-
 		if (is_hdmi)
 			dpll |= MDFLD_VCO_SEL;
 
@@ -935,20 +917,7 @@ static int mdfld_crtc_mode_set(struct drm_crtc *crtc,
 		/* compute bitmask from p1 value */
 		dpll |= (1 << (clock.p1 - 2)) << 17;
 
-#if 0 /* 1080p30 & 720p */
-		dpll = 0x00050000;
-		fp = 0x000001be;
-#endif
-#if 0 /* 480p */
-		dpll = 0x02010000;
-		fp = 0x000000d2;
-#endif
 	} else {
-#if 0 /*DBI_TPO_480x864*/
-		dpll = 0x00020000;
-		fp = 0x00000156;
-#endif /* DBI_TPO_480x864 */ /* get from spec. */
-
 		dpll = 0x00800000;
 		fp = 0x000000c1;
 	}
diff --git a/drivers/gpu/drm/gma500/mdfld_output.h b/drivers/gpu/drm/gma500/mdfld_output.h
index ab2b27c0f037..17a944d70add 100644
--- a/drivers/gpu/drm/gma500/mdfld_output.h
+++ b/drivers/gpu/drm/gma500/mdfld_output.h
@@ -51,7 +51,6 @@ struct panel_info {
 };
 
 struct panel_funcs {
-	const struct drm_encoder_funcs *encoder_funcs;
 	const struct drm_encoder_helper_funcs *encoder_helper_funcs;
 	struct drm_display_mode * (*get_config_mode)(struct drm_device *);
 	int (*get_panel_info)(struct drm_device *, int, struct panel_info *);
diff --git a/drivers/gpu/drm/gma500/mdfld_tmd_vid.c b/drivers/gpu/drm/gma500/mdfld_tmd_vid.c
index 49c92debb7b2..25e897b98f86 100644
--- a/drivers/gpu/drm/gma500/mdfld_tmd_vid.c
+++ b/drivers/gpu/drm/gma500/mdfld_tmd_vid.c
@@ -188,13 +188,7 @@ static const struct drm_encoder_helper_funcs
 	.commit = mdfld_dsi_dpi_commit,
 };
 
-/*TPO DPI encoder funcs*/
-static const struct drm_encoder_funcs mdfld_tpo_dpi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 const struct panel_funcs mdfld_tmd_vid_funcs = {
-	.encoder_funcs = &mdfld_tpo_dpi_encoder_funcs,
 	.encoder_helper_funcs = &mdfld_tpo_dpi_encoder_helper_funcs,
 	.get_config_mode = &tmd_vid_get_config_mode,
 	.get_panel_info = tmd_vid_get_panel_info,
diff --git a/drivers/gpu/drm/gma500/mdfld_tpo_vid.c b/drivers/gpu/drm/gma500/mdfld_tpo_vid.c
index a9420bf9a419..11845978fb0a 100644
--- a/drivers/gpu/drm/gma500/mdfld_tpo_vid.c
+++ b/drivers/gpu/drm/gma500/mdfld_tpo_vid.c
@@ -76,13 +76,7 @@ static const struct drm_encoder_helper_funcs
 	.commit = mdfld_dsi_dpi_commit,
 };
 
-/*TPO DPI encoder funcs*/
-static const struct drm_encoder_funcs mdfld_tpo_dpi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 const struct panel_funcs mdfld_tpo_vid_funcs = {
-	.encoder_funcs = &mdfld_tpo_dpi_encoder_funcs,
 	.encoder_helper_funcs = &mdfld_tpo_dpi_encoder_helper_funcs,
 	.get_config_mode = &tpo_vid_get_config_mode,
 	.get_panel_info = tpo_vid_get_panel_info,
diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi.c b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
index f4370232767d..a097a59a9eae 100644
--- a/drivers/gpu/drm/gma500/oaktrail_hdmi.c
+++ b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 
 #include <drm/drm.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "psb_drv.h"
 #include "psb_intel_drv.h"
@@ -620,15 +621,6 @@ static const struct drm_connector_funcs oaktrail_hdmi_connector_funcs = {
 	.destroy = oaktrail_hdmi_destroy,
 };
 
-static void oaktrail_hdmi_enc_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs oaktrail_hdmi_enc_funcs = {
-	.destroy = oaktrail_hdmi_enc_destroy,
-};
-
 void oaktrail_hdmi_init(struct drm_device *dev,
 					struct psb_intel_mode_device *mode_dev)
 {
@@ -651,9 +643,7 @@ void oaktrail_hdmi_init(struct drm_device *dev,
 			   &oaktrail_hdmi_connector_funcs,
 			   DRM_MODE_CONNECTOR_DVID);
 
-	drm_encoder_init(dev, encoder,
-			 &oaktrail_hdmi_enc_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS);
 
 	gma_connector_attach_encoder(gma_connector, gma_encoder);
 
@@ -673,11 +663,6 @@ void oaktrail_hdmi_init(struct drm_device *dev,
 	kfree(gma_encoder);
 }
 
-static const struct pci_device_id hdmi_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080d) },
-	{ 0 }
-};
-
 void oaktrail_hdmi_setup(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c
index 582e09597500..2828360153d1 100644
--- a/drivers/gpu/drm/gma500/oaktrail_lvds.c
+++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
@@ -13,6 +13,8 @@
 
 #include <asm/intel-mid.h>
 
+#include <drm/drm_simple_kms_helper.h>
+
 #include "intel_bios.h"
 #include "power.h"
 #include "psb_drv.h"
@@ -311,8 +313,7 @@ void oaktrail_lvds_init(struct drm_device *dev,
 			   &psb_intel_lvds_connector_funcs,
 			   DRM_MODE_CONNECTOR_LVDS);
 
-	drm_encoder_init(dev, encoder, &psb_intel_lvds_enc_funcs,
-			 DRM_MODE_ENCODER_LVDS, NULL);
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS);
 
 	gma_connector_attach_encoder(gma_connector, gma_encoder);
 	gma_encoder->type = INTEL_OUTPUT_LVDS;
diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
index 16c6136f778b..fb601983cef0 100644
--- a/drivers/gpu/drm/gma500/psb_intel_drv.h
+++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
@@ -252,7 +252,6 @@ extern int psb_intel_lvds_set_property(struct drm_connector *connector,
 					struct drm_property *property,
 					uint64_t value);
 extern void psb_intel_lvds_destroy(struct drm_connector *connector);
-extern const struct drm_encoder_funcs psb_intel_lvds_enc_funcs;
 
 /* intel_gmbus.c */
 extern void gma_intel_i2c_reset(struct drm_device *dev);
diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c
index afaebab7bc17..063c66bb946d 100644
--- a/drivers/gpu/drm/gma500/psb_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c
@@ -11,6 +11,8 @@
 #include <linux/i2c.h>
 #include <linux/pm_runtime.h>
 
+#include <drm/drm_simple_kms_helper.h>
+
 #include "intel_bios.h"
 #include "power.h"
 #include "psb_drv.h"
@@ -621,18 +623,6 @@ const struct drm_connector_funcs psb_intel_lvds_connector_funcs = {
 	.destroy = psb_intel_lvds_destroy,
 };
 
-
-static void psb_intel_lvds_enc_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-const struct drm_encoder_funcs psb_intel_lvds_enc_funcs = {
-	.destroy = psb_intel_lvds_enc_destroy,
-};
-
-
-
 /**
  * psb_intel_lvds_init - setup LVDS connectors on this device
  * @dev: drm device
@@ -683,9 +673,7 @@ void psb_intel_lvds_init(struct drm_device *dev,
 			   &psb_intel_lvds_connector_funcs,
 			   DRM_MODE_CONNECTOR_LVDS);
 
-	drm_encoder_init(dev, encoder,
-			 &psb_intel_lvds_enc_funcs,
-			 DRM_MODE_ENCODER_LVDS, NULL);
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS);
 
 	gma_connector_attach_encoder(gma_connector, gma_encoder);
 	gma_encoder->type = INTEL_OUTPUT_LVDS;
diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
index 264d7ad004b4..68fb3d7c172b 100644
--- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
+++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
@@ -864,36 +864,6 @@ static bool psb_intel_sdvo_set_avi_infoframe(struct psb_intel_sdvo *psb_intel_sd
 	DRM_INFO("HDMI is not supported yet");
 
 	return false;
-#if 0
-	struct dip_infoframe avi_if = {
-		.type = DIP_TYPE_AVI,
-		.ver = DIP_VERSION_AVI,
-		.len = DIP_LEN_AVI,
-	};
-	uint8_t tx_rate = SDVO_HBUF_TX_VSYNC;
-	uint8_t set_buf_index[2] = { 1, 0 };
-	uint64_t *data = (uint64_t *)&avi_if;
-	unsigned i;
-
-	intel_dip_infoframe_csum(&avi_if);
-
-	if (!psb_intel_sdvo_set_value(psb_intel_sdvo,
-				  SDVO_CMD_SET_HBUF_INDEX,
-				  set_buf_index, 2))
-		return false;
-
-	for (i = 0; i < sizeof(avi_if); i += 8) {
-		if (!psb_intel_sdvo_set_value(psb_intel_sdvo,
-					  SDVO_CMD_SET_HBUF_DATA,
-					  data, 8))
-			return false;
-		data++;
-	}
-
-	return psb_intel_sdvo_set_value(psb_intel_sdvo,
-				    SDVO_CMD_SET_HBUF_TXRATE,
-				    &tx_rate, 1);
-#endif
 }
 
 static bool psb_intel_sdvo_set_tv_format(struct psb_intel_sdvo *psb_intel_sdvo)
@@ -1227,75 +1197,6 @@ static bool psb_intel_sdvo_get_capabilities(struct psb_intel_sdvo *psb_intel_sdv
 	return true;
 }
 
-/* No use! */
-#if 0
-struct drm_connector* psb_intel_sdvo_find(struct drm_device *dev, int sdvoB)
-{
-	struct drm_connector *connector = NULL;
-	struct psb_intel_sdvo *iout = NULL;
-	struct psb_intel_sdvo *sdvo;
-
-	/* find the sdvo connector */
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		iout = to_psb_intel_sdvo(connector);
-
-		if (iout->type != INTEL_OUTPUT_SDVO)
-			continue;
-
-		sdvo = iout->dev_priv;
-
-		if (sdvo->sdvo_reg == SDVOB && sdvoB)
-			return connector;
-
-		if (sdvo->sdvo_reg == SDVOC && !sdvoB)
-			return connector;
-
-	}
-
-	return NULL;
-}
-
-int psb_intel_sdvo_supports_hotplug(struct drm_connector *connector)
-{
-	u8 response[2];
-	u8 status;
-	struct psb_intel_sdvo *psb_intel_sdvo;
-	DRM_DEBUG_KMS("\n");
-
-	if (!connector)
-		return 0;
-
-	psb_intel_sdvo = to_psb_intel_sdvo(connector);
-
-	return psb_intel_sdvo_get_value(psb_intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
-				    &response, 2) && response[0];
-}
-
-void psb_intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
-{
-	u8 response[2];
-	u8 status;
-	struct psb_intel_sdvo *psb_intel_sdvo = to_psb_intel_sdvo(connector);
-
-	psb_intel_sdvo_write_cmd(psb_intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
-	psb_intel_sdvo_read_response(psb_intel_sdvo, &response, 2);
-
-	if (on) {
-		psb_intel_sdvo_write_cmd(psb_intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
-		status = psb_intel_sdvo_read_response(psb_intel_sdvo, &response, 2);
-
-		psb_intel_sdvo_write_cmd(psb_intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
-	} else {
-		response[0] = 0;
-		response[1] = 0;
-		psb_intel_sdvo_write_cmd(psb_intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
-	}
-
-	psb_intel_sdvo_write_cmd(psb_intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
-	psb_intel_sdvo_read_response(psb_intel_sdvo, &response, 2);
-}
-#endif
-
 static bool
 psb_intel_sdvo_multifunc_encoder(struct psb_intel_sdvo *psb_intel_sdvo)
 {
diff --git a/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c b/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c
index 9e8224456ea2..e5bdd99ad453 100644
--- a/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c
+++ b/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c
@@ -747,11 +747,11 @@ static int cmi_lcd_hack_create_device(void)
 		return -EINVAL;
 	}
 
-	client = i2c_new_device(adapter, &info);
-	if (!client) {
-		pr_err("%s: i2c_new_device() failed\n", __func__);
+	client = i2c_new_client_device(adapter, &info);
+	if (IS_ERR(client)) {
+		pr_err("%s: creating I2C device failed\n", __func__);
 		i2c_put_adapter(adapter);
-		return -EINVAL;
+		return PTR_ERR(client);
 	}
 
 	return 0;
@@ -765,12 +765,7 @@ static const struct drm_encoder_helper_funcs tc35876x_encoder_helper_funcs = {
 	.commit = mdfld_dsi_dpi_commit,
 };
 
-static const struct drm_encoder_funcs tc35876x_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 const struct panel_funcs mdfld_tc35876x_funcs = {
-	.encoder_funcs = &tc35876x_encoder_funcs,
 	.encoder_helper_funcs = &tc35876x_encoder_helper_funcs,
 	.get_config_mode = tc35876x_get_config_mode,
 	.get_panel_info = tc35876x_get_panel_info,
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
index 55b46a7150a5..cc70e836522f 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
@@ -94,6 +94,10 @@ static int hibmc_plane_atomic_check(struct drm_plane *plane,
 		return -EINVAL;
 	}
 
+	if (state->fb->pitches[0] % 128 != 0) {
+		DRM_DEBUG_ATOMIC("wrong stride with 128-byte aligned\n");
+		return -EINVAL;
+	}
 	return 0;
 }
 
@@ -119,11 +123,8 @@ static void hibmc_plane_atomic_update(struct drm_plane *plane,
 	writel(gpu_addr, priv->mmio + HIBMC_CRT_FB_ADDRESS);
 
 	reg = state->fb->width * (state->fb->format->cpp[0]);
-	/* now line_pad is 16 */
-	reg = PADDING(16, reg);
 
-	line_l = state->fb->width * state->fb->format->cpp[0];
-	line_l = PADDING(16, line_l);
+	line_l = state->fb->pitches[0];
 	writel(HIBMC_FIELD(HIBMC_CRT_FB_WIDTH_WIDTH, reg) |
 	       HIBMC_FIELD(HIBMC_CRT_FB_WIDTH_OFFS, line_l),
 	       priv->mmio + HIBMC_CRT_FB_WIDTH);
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
index 222356a4f9a8..a6fd0c29e5b8 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
@@ -94,7 +94,7 @@ static int hibmc_kms_init(struct hibmc_drm_private *priv)
 	priv->dev->mode_config.max_height = 1200;
 
 	priv->dev->mode_config.fb_base = priv->fb_base;
-	priv->dev->mode_config.preferred_depth = 24;
+	priv->dev->mode_config.preferred_depth = 32;
 	priv->dev->mode_config.prefer_shadow = 1;
 
 	priv->dev->mode_config.funcs = (void *)&hibmc_mode_funcs;
@@ -307,11 +307,7 @@ static int hibmc_load(struct drm_device *dev)
 	/* reset all the states of crtc/plane/encoder/connector */
 	drm_mode_config_reset(dev);
 
-	ret = drm_fbdev_generic_setup(dev, 16);
-	if (ret) {
-		DRM_ERROR("failed to initialize fbdev: %d\n", ret);
-		goto err;
-	}
+	drm_fbdev_generic_setup(dev, dev->mode_config.preferred_depth);
 
 	return 0;
 
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
index 99397ac3b363..322bd542e89d 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
@@ -50,7 +50,7 @@ void hibmc_mm_fini(struct hibmc_drm_private *hibmc)
 int hibmc_dumb_create(struct drm_file *file, struct drm_device *dev,
 		      struct drm_mode_create_dumb *args)
 {
-	return drm_gem_vram_fill_create_dumb(file, dev, 0, 16, args);
+	return drm_gem_vram_fill_create_dumb(file, dev, 0, 128, args);
 }
 
 const struct drm_mode_config_funcs hibmc_mode_funcs = {
diff --git a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
index f31068d74b18..00e87c290796 100644
--- a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
+++ b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
@@ -20,11 +20,11 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_device.h>
-#include <drm/drm_encoder_slave.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_of.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "dw_dsi_reg.h"
 
@@ -696,10 +696,6 @@ static const struct drm_encoder_helper_funcs dw_encoder_helper_funcs = {
 	.disable	= dsi_encoder_disable
 };
 
-static const struct drm_encoder_funcs dw_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int dw_drm_encoder_init(struct device *dev,
 			       struct drm_device *drm_dev,
 			       struct drm_encoder *encoder)
@@ -713,8 +709,7 @@ static int dw_drm_encoder_init(struct device *dev,
 	}
 
 	encoder->possible_crtcs = crtc_mask;
-	ret = drm_encoder_init(drm_dev, encoder, &dw_encoder_funcs,
-			       DRM_MODE_ENCODER_DSI, NULL);
+	ret = drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_DSI);
 	if (ret) {
 		DRM_ERROR("failed to init dsi encoder\n");
 		return ret;
diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
index 86000127d4ee..c339e632522a 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
@@ -940,7 +940,6 @@ static struct drm_driver ade_driver = {
 };
 
 struct kirin_drm_data ade_driver_data = {
-	.register_connects = false,
 	.num_planes = ADE_CH_NUM,
 	.prim_plane = ADE_CH1,
 	.channel_formats = channel_formats,
diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
index d3145ae877d7..4349da3e2379 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
@@ -219,40 +219,6 @@ static int kirin_drm_kms_cleanup(struct drm_device *dev)
 	return 0;
 }
 
-static int kirin_drm_connectors_register(struct drm_device *dev)
-{
-	struct drm_connector *connector;
-	struct drm_connector *failed_connector;
-	struct drm_connector_list_iter conn_iter;
-	int ret;
-
-	mutex_lock(&dev->mode_config.mutex);
-	drm_connector_list_iter_begin(dev, &conn_iter);
-	drm_for_each_connector_iter(connector, &conn_iter) {
-		ret = drm_connector_register(connector);
-		if (ret) {
-			failed_connector = connector;
-			goto err;
-		}
-	}
-	drm_connector_list_iter_end(&conn_iter);
-	mutex_unlock(&dev->mode_config.mutex);
-
-	return 0;
-
-err:
-	drm_connector_list_iter_begin(dev, &conn_iter);
-	drm_for_each_connector_iter(connector, &conn_iter) {
-		if (failed_connector == connector)
-			break;
-		drm_connector_unregister(connector);
-	}
-	drm_connector_list_iter_end(&conn_iter);
-	mutex_unlock(&dev->mode_config.mutex);
-
-	return ret;
-}
-
 static int kirin_drm_bind(struct device *dev)
 {
 	struct kirin_drm_data *driver_data;
@@ -279,17 +245,8 @@ static int kirin_drm_bind(struct device *dev)
 
 	drm_fbdev_generic_setup(drm_dev, 32);
 
-	/* connectors should be registered after drm device register */
-	if (driver_data->register_connects) {
-		ret = kirin_drm_connectors_register(drm_dev);
-		if (ret)
-			goto err_drm_dev_unregister;
-	}
-
 	return 0;
 
-err_drm_dev_unregister:
-	drm_dev_unregister(drm_dev);
 err_kms_cleanup:
 	kirin_drm_kms_cleanup(drm_dev);
 err_drm_dev_put:
diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.h b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.h
index 4d5c05a24065..dee8ec2f7f2e 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.h
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.h
@@ -37,7 +37,6 @@ struct kirin_drm_data {
 	u32 channel_formats_cnt;
 	int config_max_width;
 	int config_max_height;
-	bool register_connects;
 	u32 num_planes;
 	u32 prim_plane;
 
diff --git a/drivers/gpu/drm/i2c/sil164_drv.c b/drivers/gpu/drm/i2c/sil164_drv.c
index a839f78a4c8a..741886b54419 100644
--- a/drivers/gpu/drm/i2c/sil164_drv.c
+++ b/drivers/gpu/drm/i2c/sil164_drv.c
@@ -393,7 +393,7 @@ sil164_detect_slave(struct i2c_client *client)
 		return NULL;
 	}
 
-	return i2c_new_device(adap, &info);
+	return i2c_new_client_device(adap, &info);
 }
 
 static int
@@ -402,6 +402,7 @@ sil164_encoder_init(struct i2c_client *client,
 		    struct drm_encoder_slave *encoder)
 {
 	struct sil164_priv *priv;
+	struct i2c_client *slave_client;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -410,7 +411,9 @@ sil164_encoder_init(struct i2c_client *client,
 	encoder->slave_priv = priv;
 	encoder->slave_funcs = &sil164_encoder_funcs;
 
-	priv->duallink_slave = sil164_detect_slave(client);
+	slave_client = sil164_detect_slave(client);
+	if (!IS_ERR(slave_client))
+		priv->duallink_slave = slave_client;
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index c3332209f27a..3c90d7ae09d6 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -19,6 +19,7 @@
 #include <drm/drm_of.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 #include <drm/i2c/tda998x.h>
 
 #include <media/cec-notifier.h>
@@ -1949,9 +1950,9 @@ static int tda998x_create(struct device *dev)
 	cec_info.platform_data = &priv->cec_glue;
 	cec_info.irq = client->irq;
 
-	priv->cec = i2c_new_device(client->adapter, &cec_info);
-	if (!priv->cec) {
-		ret = -ENODEV;
+	priv->cec = i2c_new_client_device(client->adapter, &cec_info);
+	if (IS_ERR(priv->cec)) {
+		ret = PTR_ERR(priv->cec);
 		goto fail;
 	}
 
@@ -1997,15 +1998,6 @@ static int tda998x_create(struct device *dev)
 
 /* DRM encoder functions */
 
-static void tda998x_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs tda998x_encoder_funcs = {
-	.destroy = tda998x_encoder_destroy,
-};
-
 static int tda998x_encoder_init(struct device *dev, struct drm_device *drm)
 {
 	struct tda998x_priv *priv = dev_get_drvdata(dev);
@@ -2023,8 +2015,8 @@ static int tda998x_encoder_init(struct device *dev, struct drm_device *drm)
 
 	priv->encoder.possible_crtcs = crtcs;
 
-	ret = drm_encoder_init(drm, &priv->encoder, &tda998x_encoder_funcs,
-			       DRM_MODE_ENCODER_TMDS, NULL);
+	ret = drm_simple_encoder_init(drm, &priv->encoder,
+				      DRM_MODE_ENCODER_TMDS);
 	if (ret)
 		goto err_encoder;
 
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 6cd1f6253814..caf00d92ea9d 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -22,6 +22,7 @@ subdir-ccflags-y += $(call cc-disable-warning, sign-compare)
 subdir-ccflags-y += $(call cc-disable-warning, sometimes-uninitialized)
 subdir-ccflags-y += $(call cc-disable-warning, initializer-overrides)
 subdir-ccflags-y += $(call cc-disable-warning, uninitialized)
+subdir-ccflags-y += $(call cc-disable-warning, frame-address)
 subdir-ccflags-$(CONFIG_DRM_I915_WERROR) += -Werror
 
 # Fine grained warnings disable
@@ -89,7 +90,9 @@ gt-y += \
 	gt/intel_engine_pool.o \
 	gt/intel_engine_user.o \
 	gt/intel_ggtt.o \
+	gt/intel_ggtt_fencing.o \
 	gt/intel_gt.o \
+	gt/intel_gt_clock_utils.o \
 	gt/intel_gt_irq.o \
 	gt/intel_gt_pm.o \
 	gt/intel_gt_pm_irq.o \
@@ -108,6 +111,7 @@ gt-y += \
 	gt/intel_sseu.o \
 	gt/intel_timeline.o \
 	gt/intel_workarounds.o \
+	gt/shmem_utils.o \
 	gt/sysfs_engines.o
 # autogenerated null render state
 gt-y += \
@@ -150,7 +154,6 @@ i915-y += \
 	  i915_buddy.o \
 	  i915_cmd_parser.o \
 	  i915_gem_evict.o \
-	  i915_gem_fence_reg.o \
 	  i915_gem_gtt.o \
 	  i915_gem.o \
 	  i915_globals.o \
@@ -164,14 +167,18 @@ i915-y += \
 
 # general-purpose microcontroller (GuC) support
 i915-y += gt/uc/intel_uc.o \
+	  gt/uc/intel_uc_debugfs.o \
 	  gt/uc/intel_uc_fw.o \
 	  gt/uc/intel_guc.o \
 	  gt/uc/intel_guc_ads.o \
 	  gt/uc/intel_guc_ct.o \
+	  gt/uc/intel_guc_debugfs.o \
 	  gt/uc/intel_guc_fw.o \
 	  gt/uc/intel_guc_log.o \
+	  gt/uc/intel_guc_log_debugfs.o \
 	  gt/uc/intel_guc_submission.o \
 	  gt/uc/intel_huc.o \
+	  gt/uc/intel_huc_debugfs.o \
 	  gt/uc/intel_huc_fw.o
 
 # modesetting core code
@@ -240,23 +247,6 @@ i915-y += \
 	display/vlv_dsi.o \
 	display/vlv_dsi_pll.o
 
-# perf code
-i915-y += \
-	oa/i915_oa_hsw.o \
-	oa/i915_oa_bdw.o \
-	oa/i915_oa_chv.o \
-	oa/i915_oa_sklgt2.o \
-	oa/i915_oa_sklgt3.o \
-	oa/i915_oa_sklgt4.o \
-	oa/i915_oa_bxt.o \
-	oa/i915_oa_kblgt2.o \
-	oa/i915_oa_kblgt3.o \
-	oa/i915_oa_glk.o \
-	oa/i915_oa_cflgt2.o \
-	oa/i915_oa_cflgt3.o \
-	oa/i915_oa_cnl.o \
-	oa/i915_oa_icl.o \
-	oa/i915_oa_tgl.o
 i915-y += i915_perf.o
 
 # Post-mortem debug and GPU hang state capture
@@ -270,7 +260,8 @@ i915-$(CONFIG_DRM_I915_SELFTEST) += \
 	selftests/igt_live_test.o \
 	selftests/igt_mmap.o \
 	selftests/igt_reset.o \
-	selftests/igt_spinner.o
+	selftests/igt_spinner.o \
+	selftests/librapl.o
 
 # virtual gpu code
 i915-y += i915_vgpu.o
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 17cee6f80d8b..4fec5bd64920 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -36,15 +36,15 @@
 #include "intel_panel.h"
 #include "intel_vdsc.h"
 
-static inline int header_credits_available(struct drm_i915_private *dev_priv,
-					   enum transcoder dsi_trans)
+static int header_credits_available(struct drm_i915_private *dev_priv,
+				    enum transcoder dsi_trans)
 {
 	return (intel_de_read(dev_priv, DSI_CMD_TXCTL(dsi_trans)) & FREE_HEADER_CREDIT_MASK)
 		>> FREE_HEADER_CREDIT_SHIFT;
 }
 
-static inline int payload_credits_available(struct drm_i915_private *dev_priv,
-					    enum transcoder dsi_trans)
+static int payload_credits_available(struct drm_i915_private *dev_priv,
+				     enum transcoder dsi_trans)
 {
 	return (intel_de_read(dev_priv, DSI_CMD_TXCTL(dsi_trans)) & FREE_PLOAD_CREDIT_MASK)
 		>> FREE_PLOAD_CREDIT_SHIFT;
@@ -186,16 +186,19 @@ static int dsi_send_pkt_hdr(struct intel_dsi_host *host,
 static int dsi_send_pkt_payld(struct intel_dsi_host *host,
 			      struct mipi_dsi_packet pkt)
 {
+	struct intel_dsi *intel_dsi = host->intel_dsi;
+	struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev);
+
 	/* payload queue can accept *256 bytes*, check limit */
 	if (pkt.payload_length > MAX_PLOAD_CREDIT * 4) {
-		DRM_ERROR("payload size exceeds max queue limit\n");
+		drm_err(&i915->drm, "payload size exceeds max queue limit\n");
 		return -1;
 	}
 
 	/* load data into command payload queue */
 	if (!add_payld_to_queue(host, pkt.payload,
 				pkt.payload_length)) {
-		DRM_ERROR("adding payload to queue failed\n");
+		drm_err(&i915->drm, "adding payload to queue failed\n");
 		return -1;
 	}
 
@@ -744,6 +747,18 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
 				tmp |= VIDEO_MODE_SYNC_PULSE;
 				break;
 			}
+		} else {
+			/*
+			 * FIXME: Retrieve this info from VBT.
+			 * As per the spec when dsi transcoder is operating
+			 * in TE GATE mode, TE comes from GPIO
+			 * which is UTIL PIN for DSI 0.
+			 * Also this GPIO would not be used for other
+			 * purposes is an assumption.
+			 */
+			tmp &= ~OP_MODE_MASK;
+			tmp |= CMD_MODE_TE_GATE;
+			tmp |= TE_SOURCE_GPIO;
 		}
 
 		intel_de_write(dev_priv, DSI_TRANS_FUNC_CONF(dsi_trans), tmp);
@@ -837,14 +852,33 @@ gen11_dsi_set_transcoder_timings(struct intel_encoder *encoder,
 	}
 
 	hactive = adjusted_mode->crtc_hdisplay;
-	htotal = DIV_ROUND_UP(adjusted_mode->crtc_htotal * mul, div);
+
+	if (is_vid_mode(intel_dsi))
+		htotal = DIV_ROUND_UP(adjusted_mode->crtc_htotal * mul, div);
+	else
+		htotal = DIV_ROUND_UP((hactive + 160) * mul, div);
+
 	hsync_start = DIV_ROUND_UP(adjusted_mode->crtc_hsync_start * mul, div);
 	hsync_end = DIV_ROUND_UP(adjusted_mode->crtc_hsync_end * mul, div);
 	hsync_size  = hsync_end - hsync_start;
 	hback_porch = (adjusted_mode->crtc_htotal -
 		       adjusted_mode->crtc_hsync_end);
 	vactive = adjusted_mode->crtc_vdisplay;
-	vtotal = adjusted_mode->crtc_vtotal;
+
+	if (is_vid_mode(intel_dsi)) {
+		vtotal = adjusted_mode->crtc_vtotal;
+	} else {
+		int bpp, line_time_us, byte_clk_period_ns;
+
+		if (crtc_state->dsc.compression_enable)
+			bpp = crtc_state->dsc.compressed_bpp;
+		else
+			bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+
+		byte_clk_period_ns = 1000000 / afe_clk(encoder, crtc_state);
+		line_time_us = (htotal * (bpp / 8) * byte_clk_period_ns) / (1000 * intel_dsi->lane_count);
+		vtotal = vactive + DIV_ROUND_UP(400, line_time_us);
+	}
 	vsync_start = adjusted_mode->crtc_vsync_start;
 	vsync_end = adjusted_mode->crtc_vsync_end;
 	vsync_shift = hsync_start - htotal / 2;
@@ -873,7 +907,7 @@ gen11_dsi_set_transcoder_timings(struct intel_encoder *encoder,
 	}
 
 	/* TRANS_HSYNC register to be programmed only for video mode */
-	if (intel_dsi->operation_mode == INTEL_DSI_VIDEO_MODE) {
+	if (is_vid_mode(intel_dsi)) {
 		if (intel_dsi->video_mode_format ==
 		    VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE) {
 			/* BSPEC: hsync size should be atleast 16 pixels */
@@ -916,22 +950,27 @@ gen11_dsi_set_transcoder_timings(struct intel_encoder *encoder,
 	if (vsync_start < vactive)
 		drm_err(&dev_priv->drm, "vsync_start less than vactive\n");
 
-	/* program TRANS_VSYNC register */
-	for_each_dsi_port(port, intel_dsi->ports) {
-		dsi_trans = dsi_port_to_transcoder(port);
-		intel_de_write(dev_priv, VSYNC(dsi_trans),
-			       (vsync_start - 1) | ((vsync_end - 1) << 16));
+	/* program TRANS_VSYNC register for video mode only */
+	if (is_vid_mode(intel_dsi)) {
+		for_each_dsi_port(port, intel_dsi->ports) {
+			dsi_trans = dsi_port_to_transcoder(port);
+			intel_de_write(dev_priv, VSYNC(dsi_trans),
+				       (vsync_start - 1) | ((vsync_end - 1) << 16));
+		}
 	}
 
 	/*
-	 * FIXME: It has to be programmed only for interlaced
+	 * FIXME: It has to be programmed only for video modes and interlaced
 	 * modes. Put the check condition here once interlaced
 	 * info available as described above.
 	 * program TRANS_VSYNCSHIFT register
 	 */
-	for_each_dsi_port(port, intel_dsi->ports) {
-		dsi_trans = dsi_port_to_transcoder(port);
-		intel_de_write(dev_priv, VSYNCSHIFT(dsi_trans), vsync_shift);
+	if (is_vid_mode(intel_dsi)) {
+		for_each_dsi_port(port, intel_dsi->ports) {
+			dsi_trans = dsi_port_to_transcoder(port);
+			intel_de_write(dev_priv, VSYNCSHIFT(dsi_trans),
+				       vsync_shift);
+		}
 	}
 
 	/* program TRANS_VBLANK register, should be same as vtotal programmed */
@@ -1016,6 +1055,32 @@ static void gen11_dsi_setup_timeouts(struct intel_encoder *encoder,
 	}
 }
 
+static void gen11_dsi_config_util_pin(struct intel_encoder *encoder,
+				      bool enable)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+	u32 tmp;
+
+	/*
+	 * used as TE i/p for DSI0,
+	 * for dual link/DSI1 TE is from slave DSI1
+	 * through GPIO.
+	 */
+	if (is_vid_mode(intel_dsi) || (intel_dsi->ports & BIT(PORT_B)))
+		return;
+
+	tmp = intel_de_read(dev_priv, UTIL_PIN_CTL);
+
+	if (enable) {
+		tmp |= UTIL_PIN_DIRECTION_INPUT;
+		tmp |= UTIL_PIN_ENABLE;
+	} else {
+		tmp &= ~UTIL_PIN_ENABLE;
+	}
+	intel_de_write(dev_priv, UTIL_PIN_CTL, tmp);
+}
+
 static void
 gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
 			      const struct intel_crtc_state *crtc_state)
@@ -1037,6 +1102,9 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
 	/* setup D-PHY timings */
 	gen11_dsi_setup_dphy_timings(encoder, crtc_state);
 
+	/* Since transcoder is configured to take events from GPIO */
+	gen11_dsi_config_util_pin(encoder, true);
+
 	/* step 4h: setup DSI protocol timeouts */
 	gen11_dsi_setup_timeouts(encoder, crtc_state);
 
@@ -1088,7 +1156,8 @@ static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)
 	wait_for_cmds_dispatched_to_panel(encoder);
 }
 
-static void gen11_dsi_pre_pll_enable(struct intel_encoder *encoder,
+static void gen11_dsi_pre_pll_enable(struct intel_atomic_state *state,
+				     struct intel_encoder *encoder,
 				     const struct intel_crtc_state *crtc_state,
 				     const struct drm_connector_state *conn_state)
 {
@@ -1099,7 +1168,8 @@ static void gen11_dsi_pre_pll_enable(struct intel_encoder *encoder,
 	gen11_dsi_program_esc_clk_div(encoder, crtc_state);
 }
 
-static void gen11_dsi_pre_enable(struct intel_encoder *encoder,
+static void gen11_dsi_pre_enable(struct intel_atomic_state *state,
+				 struct intel_encoder *encoder,
 				 const struct intel_crtc_state *pipe_config,
 				 const struct drm_connector_state *conn_state)
 {
@@ -1118,13 +1188,14 @@ static void gen11_dsi_pre_enable(struct intel_encoder *encoder,
 	gen11_dsi_set_transcoder_timings(encoder, pipe_config);
 }
 
-static void gen11_dsi_enable(struct intel_encoder *encoder,
+static void gen11_dsi_enable(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
 			     const struct intel_crtc_state *crtc_state,
 			     const struct drm_connector_state *conn_state)
 {
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
 
-	WARN_ON(crtc_state->has_pch_encoder);
+	drm_WARN_ON(state->base.dev, crtc_state->has_pch_encoder);
 
 	/* step6d: enable dsi transcoder */
 	gen11_dsi_enable_transcoder(encoder);
@@ -1180,6 +1251,15 @@ static void gen11_dsi_deconfigure_trancoder(struct intel_encoder *encoder)
 	enum transcoder dsi_trans;
 	u32 tmp;
 
+	/* disable periodic update mode */
+	if (is_cmd_mode(intel_dsi)) {
+		for_each_dsi_port(port, intel_dsi->ports) {
+			tmp = intel_de_read(dev_priv, DSI_CMD_FRMCTL(port));
+			tmp &= ~DSI_PERIODIC_FRAME_UPDATE_ENABLE;
+			intel_de_write(dev_priv, DSI_CMD_FRMCTL(port), tmp);
+		}
+	}
+
 	/* put dsi link in ULPS */
 	for_each_dsi_port(port, intel_dsi->ports) {
 		dsi_trans = dsi_port_to_transcoder(port);
@@ -1264,7 +1344,8 @@ static void gen11_dsi_disable_io_power(struct intel_encoder *encoder)
 	}
 }
 
-static void gen11_dsi_disable(struct intel_encoder *encoder,
+static void gen11_dsi_disable(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *old_crtc_state,
 			      const struct drm_connector_state *old_conn_state)
 {
@@ -1286,11 +1367,14 @@ static void gen11_dsi_disable(struct intel_encoder *encoder,
 	/* step3: disable port */
 	gen11_dsi_disable_port(encoder);
 
+	gen11_dsi_config_util_pin(encoder, false);
+
 	/* step4: disable IO power */
 	gen11_dsi_disable_io_power(encoder);
 }
 
-static void gen11_dsi_post_disable(struct intel_encoder *encoder,
+static void gen11_dsi_post_disable(struct intel_atomic_state *state,
+				   struct intel_encoder *encoder,
 				   const struct intel_crtc_state *old_crtc_state,
 				   const struct drm_connector_state *old_conn_state)
 {
@@ -1347,6 +1431,22 @@ static void gen11_dsi_get_timings(struct intel_encoder *encoder,
 	adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
 }
 
+static bool gen11_dsi_is_periodic_cmd_mode(struct intel_dsi *intel_dsi)
+{
+	struct drm_device *dev = intel_dsi->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	enum transcoder dsi_trans;
+	u32 val;
+
+	if (intel_dsi->ports == BIT(PORT_B))
+		dsi_trans = TRANSCODER_DSI_1;
+	else
+		dsi_trans = TRANSCODER_DSI_0;
+
+	val = intel_de_read(dev_priv, DSI_TRANS_FUNC_CONF(dsi_trans));
+	return (val & DSI_PERIODIC_FRAME_UPDATE_ENABLE);
+}
+
 static void gen11_dsi_get_config(struct intel_encoder *encoder,
 				 struct intel_crtc_state *pipe_config)
 {
@@ -1367,6 +1467,10 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
 	gen11_dsi_get_timings(encoder, pipe_config);
 	pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
 	pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
+
+	if (gen11_dsi_is_periodic_cmd_mode(intel_dsi))
+		pipe_config->hw.adjusted_mode.private_flags |=
+					I915_MODE_FLAG_DSI_PERIODIC_CMD_MODE;
 }
 
 static int gen11_dsi_dsc_compute_config(struct intel_encoder *encoder,
@@ -1417,18 +1521,22 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 				    struct intel_crtc_state *pipe_config,
 				    struct drm_connector_state *conn_state)
 {
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
 						   base);
 	struct intel_connector *intel_connector = intel_dsi->attached_connector;
-	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
 	const struct drm_display_mode *fixed_mode =
-					intel_connector->panel.fixed_mode;
+		intel_connector->panel.fixed_mode;
 	struct drm_display_mode *adjusted_mode =
-					&pipe_config->hw.adjusted_mode;
+		&pipe_config->hw.adjusted_mode;
+	int ret;
 
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	intel_fixed_panel_mode(fixed_mode, adjusted_mode);
-	intel_pch_panel_fitting(crtc, pipe_config, conn_state->scaling_mode);
+
+	ret = intel_pch_panel_fitting(pipe_config, conn_state);
+	if (ret)
+		return ret;
 
 	adjusted_mode->flags = 0;
 
@@ -1446,10 +1554,32 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 	pipe_config->clock_set = true;
 
 	if (gen11_dsi_dsc_compute_config(encoder, pipe_config))
-		DRM_DEBUG_KMS("Attempting to use DSC failed\n");
+		drm_dbg_kms(&i915->drm, "Attempting to use DSC failed\n");
 
 	pipe_config->port_clock = afe_clk(encoder, pipe_config) / 5;
 
+	/* We would not operate in periodic command mode */
+	pipe_config->hw.adjusted_mode.private_flags &=
+					~I915_MODE_FLAG_DSI_PERIODIC_CMD_MODE;
+
+	/*
+	 * In case of TE GATE cmd mode, we
+	 * receive TE from the slave if
+	 * dual link is enabled
+	 */
+	if (is_cmd_mode(intel_dsi)) {
+		if (intel_dsi->ports == (BIT(PORT_B) | BIT(PORT_A)))
+			pipe_config->hw.adjusted_mode.private_flags |=
+						I915_MODE_FLAG_DSI_USE_TE1 |
+						I915_MODE_FLAG_DSI_USE_TE0;
+		else if (intel_dsi->ports == BIT(PORT_B))
+			pipe_config->hw.adjusted_mode.private_flags |=
+						I915_MODE_FLAG_DSI_USE_TE1;
+		else
+			pipe_config->hw.adjusted_mode.private_flags |=
+						I915_MODE_FLAG_DSI_USE_TE0;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
index 457b258683d3..79032701873a 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
+++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
@@ -125,7 +125,7 @@ intel_plane_destroy_state(struct drm_plane *plane,
 			  struct drm_plane_state *state)
 {
 	struct intel_plane_state *plane_state = to_intel_plane_state(state);
-	WARN_ON(plane_state->vma);
+	drm_WARN_ON(plane->dev, plane_state->vma);
 
 	__drm_atomic_helper_plane_destroy_state(&plane_state->uapi);
 	if (plane_state->hw.fb)
@@ -264,6 +264,20 @@ void intel_plane_copy_uapi_to_hw_state(struct intel_plane_state *plane_state,
 	plane_state->hw.color_range = from_plane_state->uapi.color_range;
 }
 
+void intel_plane_set_invisible(struct intel_crtc_state *crtc_state,
+			       struct intel_plane_state *plane_state)
+{
+	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
+
+	crtc_state->active_planes &= ~BIT(plane->id);
+	crtc_state->nv12_planes &= ~BIT(plane->id);
+	crtc_state->c8_planes &= ~BIT(plane->id);
+	crtc_state->data_rate[plane->id] = 0;
+	crtc_state->min_cdclk[plane->id] = 0;
+
+	plane_state->uapi.visible = false;
+}
+
 int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_state,
 					struct intel_crtc_state *new_crtc_state,
 					const struct intel_plane_state *old_plane_state,
@@ -273,12 +287,7 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_
 	const struct drm_framebuffer *fb = new_plane_state->hw.fb;
 	int ret;
 
-	new_crtc_state->active_planes &= ~BIT(plane->id);
-	new_crtc_state->nv12_planes &= ~BIT(plane->id);
-	new_crtc_state->c8_planes &= ~BIT(plane->id);
-	new_crtc_state->data_rate[plane->id] = 0;
-	new_crtc_state->min_cdclk[plane->id] = 0;
-	new_plane_state->uapi.visible = false;
+	intel_plane_set_invisible(new_crtc_state, new_plane_state);
 
 	if (!new_plane_state->hw.crtc && !old_plane_state->hw.crtc)
 		return 0;
@@ -387,7 +396,7 @@ skl_next_plane_to_commit(struct intel_atomic_state *state,
 	}
 
 	/* should never happen */
-	WARN_ON(1);
+	drm_WARN_ON(state->base.dev, 1);
 
 	return NULL;
 }
diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.h b/drivers/gpu/drm/i915/display/intel_atomic_plane.h
index a6bbf42bae1f..59dd1fbb02ea 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic_plane.h
+++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.h
@@ -52,5 +52,7 @@ int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_stat
 int intel_plane_calc_min_cdclk(struct intel_atomic_state *state,
 			       struct intel_plane *plane,
 			       bool *need_cdclk_calc);
+void intel_plane_set_invisible(struct intel_crtc_state *crtc_state,
+			       struct intel_plane_state *plane_state);
 
 #endif /* __INTEL_ATOMIC_PLANE_H__ */
diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c
index 62f234f641de..36aaee8536f1 100644
--- a/drivers/gpu/drm/i915/display/intel_audio.c
+++ b/drivers/gpu/drm/i915/display/intel_audio.c
@@ -252,14 +252,16 @@ static u32 audio_config_hdmi_pixel_clock(const struct intel_crtc_state *crtc_sta
 		i = ARRAY_SIZE(hdmi_audio_clock);
 
 	if (i == ARRAY_SIZE(hdmi_audio_clock)) {
-		DRM_DEBUG_KMS("HDMI audio pixel clock setting for %d not found, falling back to defaults\n",
-			      adjusted_mode->crtc_clock);
+		drm_dbg_kms(&dev_priv->drm,
+			    "HDMI audio pixel clock setting for %d not found, falling back to defaults\n",
+			    adjusted_mode->crtc_clock);
 		i = 1;
 	}
 
-	DRM_DEBUG_KMS("Configuring HDMI audio for pixel clock %d (0x%08x)\n",
-		      hdmi_audio_clock[i].clock,
-		      hdmi_audio_clock[i].config);
+	drm_dbg_kms(&dev_priv->drm,
+		    "Configuring HDMI audio for pixel clock %d (0x%08x)\n",
+		    hdmi_audio_clock[i].clock,
+		    hdmi_audio_clock[i].config);
 
 	return hdmi_audio_clock[i].config;
 }
@@ -512,6 +514,143 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder,
 	mutex_unlock(&dev_priv->av_mutex);
 }
 
+/* Add a factor to take care of rounding and truncations */
+#define ROUNDING_FACTOR 10000
+
+static unsigned int get_hblank_early_enable_config(struct intel_encoder *encoder,
+						   const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+	unsigned int link_clks_available, link_clks_required;
+	unsigned int tu_data, tu_line, link_clks_active;
+	unsigned int hblank_rise, hblank_early_prog;
+	unsigned int h_active, h_total, hblank_delta, pixel_clk, v_total;
+	unsigned int fec_coeff, refresh_rate, cdclk, vdsc_bpp;
+
+	h_active = crtc_state->hw.adjusted_mode.crtc_hdisplay;
+	h_total = crtc_state->hw.adjusted_mode.crtc_htotal;
+	v_total = crtc_state->hw.adjusted_mode.crtc_vtotal;
+	pixel_clk = crtc_state->hw.adjusted_mode.crtc_clock;
+	refresh_rate = crtc_state->hw.adjusted_mode.vrefresh;
+	vdsc_bpp = crtc_state->dsc.compressed_bpp;
+	cdclk = i915->cdclk.hw.cdclk;
+	/* fec= 0.972261, using rounding multiplier of 1000000 */
+	fec_coeff = 972261;
+
+	drm_dbg_kms(&i915->drm, "h_active = %u link_clk = %u :"
+		    "lanes = %u vdsc_bpp = %u cdclk = %u\n",
+		    h_active, crtc_state->port_clock, crtc_state->lane_count,
+		    vdsc_bpp, cdclk);
+
+	if (WARN_ON(!crtc_state->port_clock || !crtc_state->lane_count ||
+		    !crtc_state->dsc.compressed_bpp || !i915->cdclk.hw.cdclk))
+		return 0;
+
+	link_clks_available = ((((h_total - h_active) *
+			       ((crtc_state->port_clock * ROUNDING_FACTOR) /
+				pixel_clk)) / ROUNDING_FACTOR) - 28);
+
+	link_clks_required = DIV_ROUND_UP(192000, (refresh_rate *
+					  v_total)) * ((48 /
+					  crtc_state->lane_count) + 2);
+
+	if (link_clks_available > link_clks_required)
+		hblank_delta = 32;
+	else
+		hblank_delta = DIV_ROUND_UP(((((5 * ROUNDING_FACTOR) /
+					    crtc_state->port_clock) + ((5 *
+					    ROUNDING_FACTOR) /
+					    cdclk)) * pixel_clk),
+					    ROUNDING_FACTOR);
+
+	tu_data = (pixel_clk * vdsc_bpp * 8) / ((crtc_state->port_clock *
+		   crtc_state->lane_count * fec_coeff) / 1000000);
+	tu_line = (((h_active * crtc_state->port_clock * fec_coeff) /
+		   1000000) / (64 * pixel_clk));
+	link_clks_active  = (tu_line - 1) * 64 + tu_data;
+
+	hblank_rise = ((link_clks_active + 6 * DIV_ROUND_UP(link_clks_active,
+			250) + 4) * ((pixel_clk * ROUNDING_FACTOR) /
+			crtc_state->port_clock)) / ROUNDING_FACTOR;
+
+	hblank_early_prog = h_active - hblank_rise + hblank_delta;
+
+	return hblank_early_prog;
+}
+
+static unsigned int get_sample_room_req_config(const struct intel_crtc_state *crtc_state)
+{
+	unsigned int h_active, h_total, pixel_clk;
+	unsigned int samples_room;
+
+	h_active = crtc_state->hw.adjusted_mode.hdisplay;
+	h_total = crtc_state->hw.adjusted_mode.htotal;
+	pixel_clk = crtc_state->hw.adjusted_mode.clock;
+
+	samples_room = ((((h_total - h_active) * ((crtc_state->port_clock *
+			ROUNDING_FACTOR) / pixel_clk)) /
+			ROUNDING_FACTOR) - 12) / ((48 /
+			crtc_state->lane_count) + 2);
+
+	return samples_room;
+}
+
+static void enable_audio_dsc_wa(struct intel_encoder *encoder,
+				const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	enum pipe pipe = crtc->pipe;
+	unsigned int hblank_early_prog, samples_room;
+	unsigned int val;
+
+	if (INTEL_GEN(i915) < 11)
+		return;
+
+	val = intel_de_read(i915, AUD_CONFIG_BE);
+
+	if (INTEL_GEN(i915) == 11)
+		val |= HBLANK_EARLY_ENABLE_ICL(pipe);
+	else if (INTEL_GEN(i915) >= 12)
+		val |= HBLANK_EARLY_ENABLE_TGL(pipe);
+
+	if (crtc_state->dsc.compression_enable &&
+	    (crtc_state->hw.adjusted_mode.hdisplay >= 3840 &&
+	    crtc_state->hw.adjusted_mode.vdisplay >= 2160)) {
+		/* Get hblank early enable value required */
+		hblank_early_prog = get_hblank_early_enable_config(encoder,
+								   crtc_state);
+		if (hblank_early_prog < 32) {
+			val &= ~HBLANK_START_COUNT_MASK(pipe);
+			val |= HBLANK_START_COUNT(pipe, HBLANK_START_COUNT_32);
+		} else if (hblank_early_prog < 64) {
+			val &= ~HBLANK_START_COUNT_MASK(pipe);
+			val |= HBLANK_START_COUNT(pipe, HBLANK_START_COUNT_64);
+		} else if (hblank_early_prog < 96) {
+			val &= ~HBLANK_START_COUNT_MASK(pipe);
+			val |= HBLANK_START_COUNT(pipe, HBLANK_START_COUNT_96);
+		} else {
+			val &= ~HBLANK_START_COUNT_MASK(pipe);
+			val |= HBLANK_START_COUNT(pipe, HBLANK_START_COUNT_128);
+		}
+
+		/* Get samples room value required */
+		samples_room = get_sample_room_req_config(crtc_state);
+		if (samples_room < 3) {
+			val &= ~NUMBER_SAMPLES_PER_LINE_MASK(pipe);
+			val |= NUMBER_SAMPLES_PER_LINE(pipe, samples_room);
+		} else {
+			/* Program 0 i.e "All Samples available in buffer" */
+			val &= ~NUMBER_SAMPLES_PER_LINE_MASK(pipe);
+			val |= NUMBER_SAMPLES_PER_LINE(pipe, 0x0);
+		}
+	}
+
+	intel_de_write(i915, AUD_CONFIG_BE, val);
+}
+
+#undef ROUNDING_FACTOR
+
 static void hsw_audio_codec_enable(struct intel_encoder *encoder,
 				   const struct intel_crtc_state *crtc_state,
 				   const struct drm_connector_state *conn_state)
@@ -529,6 +668,10 @@ static void hsw_audio_codec_enable(struct intel_encoder *encoder,
 
 	mutex_lock(&dev_priv->av_mutex);
 
+	/* Enable Audio WA for 4k DSC usecases */
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP))
+		enable_audio_dsc_wa(encoder, crtc_state);
+
 	/* Enable audio presence detect, invalidate ELD */
 	tmp = intel_de_read(dev_priv, HSW_AUD_PIN_ELD_CP_VLD);
 	tmp |= AUDIO_OUTPUT_ENABLE(cpu_transcoder);
@@ -891,7 +1034,7 @@ static unsigned long i915_audio_component_get_power(struct device *kdev)
 	ret = intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
 
 	if (dev_priv->audio_power_refcount++ == 0) {
-		if (IS_TIGERLAKE(dev_priv) || IS_ICELAKE(dev_priv)) {
+		if (INTEL_GEN(dev_priv) >= 9) {
 			intel_de_write(dev_priv, AUD_FREQ_CNTRL,
 				       dev_priv->audio_freq_cntrl);
 			drm_dbg_kms(&dev_priv->drm,
@@ -931,7 +1074,7 @@ static void i915_audio_component_codec_wake_override(struct device *kdev,
 	unsigned long cookie;
 	u32 tmp;
 
-	if (!IS_GEN(dev_priv, 9))
+	if (INTEL_GEN(dev_priv) < 9)
 		return;
 
 	cookie = i915_audio_component_get_power(kdev);
@@ -1136,6 +1279,10 @@ static void i915_audio_component_unbind(struct device *i915_kdev,
 	drm_modeset_unlock_all(&dev_priv->drm);
 
 	device_link_remove(hda_kdev, i915_kdev);
+
+	if (dev_priv->audio_power_refcount)
+		drm_err(&dev_priv->drm, "audio power refcount %d after unbind\n",
+			dev_priv->audio_power_refcount);
 }
 
 static const struct component_ops i915_audio_component_bind_ops = {
@@ -1173,7 +1320,7 @@ static void i915_audio_component_init(struct drm_i915_private *dev_priv)
 		return;
 	}
 
-	if (IS_TIGERLAKE(dev_priv) || IS_ICELAKE(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >= 9) {
 		dev_priv->audio_freq_cntrl = intel_de_read(dev_priv,
 							   AUD_FREQ_CNTRL);
 		drm_dbg_kms(&dev_priv->drm,
diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
index 58b264bc318d..4aa54fcb0629 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -338,16 +338,17 @@ void intel_bw_crtc_update(struct intel_bw_state *bw_state,
 			  const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
 
 	bw_state->data_rate[crtc->pipe] =
 		intel_bw_crtc_data_rate(crtc_state);
 	bw_state->num_active_planes[crtc->pipe] =
 		intel_bw_crtc_num_active_planes(crtc_state);
 
-	DRM_DEBUG_KMS("pipe %c data rate %u num active planes %u\n",
-		      pipe_name(crtc->pipe),
-		      bw_state->data_rate[crtc->pipe],
-		      bw_state->num_active_planes[crtc->pipe]);
+	drm_dbg_kms(&i915->drm, "pipe %c data rate %u num active planes %u\n",
+		    pipe_name(crtc->pipe),
+		    bw_state->data_rate[crtc->pipe],
+		    bw_state->num_active_planes[crtc->pipe]);
 }
 
 static unsigned int intel_bw_num_active_planes(struct drm_i915_private *dev_priv,
@@ -374,7 +375,29 @@ static unsigned int intel_bw_data_rate(struct drm_i915_private *dev_priv,
 	return data_rate;
 }
 
-static struct intel_bw_state *
+struct intel_bw_state *
+intel_atomic_get_old_bw_state(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	struct intel_global_state *bw_state;
+
+	bw_state = intel_atomic_get_old_global_obj_state(state, &dev_priv->bw_obj);
+
+	return to_intel_bw_state(bw_state);
+}
+
+struct intel_bw_state *
+intel_atomic_get_new_bw_state(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	struct intel_global_state *bw_state;
+
+	bw_state = intel_atomic_get_new_global_obj_state(state, &dev_priv->bw_obj);
+
+	return to_intel_bw_state(bw_state);
+}
+
+struct intel_bw_state *
 intel_atomic_get_bw_state(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
diff --git a/drivers/gpu/drm/i915/display/intel_bw.h b/drivers/gpu/drm/i915/display/intel_bw.h
index a8aa7624c5aa..ac004d6f4276 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.h
+++ b/drivers/gpu/drm/i915/display/intel_bw.h
@@ -24,6 +24,15 @@ struct intel_bw_state {
 
 #define to_intel_bw_state(x) container_of((x), struct intel_bw_state, base)
 
+struct intel_bw_state *
+intel_atomic_get_old_bw_state(struct intel_atomic_state *state);
+
+struct intel_bw_state *
+intel_atomic_get_new_bw_state(struct intel_atomic_state *state);
+
+struct intel_bw_state *
+intel_atomic_get_bw_state(struct intel_atomic_state *state);
+
 void intel_bw_init_hw(struct drm_i915_private *dev_priv);
 int intel_bw_init(struct drm_i915_private *dev_priv);
 int intel_bw_atomic_check(struct intel_atomic_state *state);
diff --git a/drivers/gpu/drm/i915/display/intel_color.c b/drivers/gpu/drm/i915/display/intel_color.c
index c1cce93a1c25..98ece9cd7cdd 100644
--- a/drivers/gpu/drm/i915/display/intel_color.c
+++ b/drivers/gpu/drm/i915/display/intel_color.c
@@ -460,6 +460,16 @@ static void ilk_lut_10_pack(struct drm_color_lut *entry, u32 val)
 	entry->blue = intel_color_lut_pack(REG_FIELD_GET(PREC_PALETTE_BLUE_MASK, val), 10);
 }
 
+static void icl_lut_multi_seg_pack(struct drm_color_lut *entry, u32 ldw, u32 udw)
+{
+	entry->red = REG_FIELD_GET(PAL_PREC_MULTI_SEG_RED_UDW_MASK, udw) << 6 |
+				   REG_FIELD_GET(PAL_PREC_MULTI_SEG_RED_LDW_MASK, ldw);
+	entry->green = REG_FIELD_GET(PAL_PREC_MULTI_SEG_GREEN_UDW_MASK, udw) << 6 |
+				     REG_FIELD_GET(PAL_PREC_MULTI_SEG_GREEN_LDW_MASK, ldw);
+	entry->blue = REG_FIELD_GET(PAL_PREC_MULTI_SEG_BLUE_UDW_MASK, udw) << 6 |
+				    REG_FIELD_GET(PAL_PREC_MULTI_SEG_BLUE_LDW_MASK, ldw);
+}
+
 static void i9xx_color_commit(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
@@ -893,7 +903,7 @@ icl_load_gcmax(const struct intel_crtc_state *crtc_state,
 	struct intel_dsb *dsb = intel_dsb_get(crtc);
 	enum pipe pipe = crtc->pipe;
 
-	/* Fixme: LUT entries are 16 bit only, so we can prog 0xFFFF max */
+	/* FIXME LUT entries are 16 bit only, so we can prog 0xFFFF max */
 	intel_dsb_reg_write(dsb, PREC_PAL_GC_MAX(pipe, 0), color->red);
 	intel_dsb_reg_write(dsb, PREC_PAL_GC_MAX(pipe, 1), color->green);
 	intel_dsb_reg_write(dsb, PREC_PAL_GC_MAX(pipe, 2), color->blue);
@@ -1630,6 +1640,24 @@ static int glk_gamma_precision(const struct intel_crtc_state *crtc_state)
 	}
 }
 
+static int icl_gamma_precision(const struct intel_crtc_state *crtc_state)
+{
+	if ((crtc_state->gamma_mode & POST_CSC_GAMMA_ENABLE) == 0)
+		return 0;
+
+	switch (crtc_state->gamma_mode & GAMMA_MODE_MODE_MASK) {
+	case GAMMA_MODE_MODE_8BIT:
+		return 8;
+	case GAMMA_MODE_MODE_10BIT:
+		return 10;
+	case GAMMA_MODE_MODE_12BIT_MULTI_SEGMENTED:
+		return 16;
+	default:
+		MISSING_CASE(crtc_state->gamma_mode);
+		return 0;
+	}
+}
+
 int intel_color_get_gamma_bit_precision(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
@@ -1641,7 +1669,9 @@ int intel_color_get_gamma_bit_precision(const struct intel_crtc_state *crtc_stat
 		else
 			return i9xx_gamma_precision(crtc_state);
 	} else {
-		if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
+		if (INTEL_GEN(dev_priv) >= 11)
+			return icl_gamma_precision(crtc_state);
+		else if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
 			return glk_gamma_precision(crtc_state);
 		else if (IS_IRONLAKE(dev_priv))
 			return ilk_gamma_precision(crtc_state);
@@ -1658,9 +1688,9 @@ static bool err_check(struct drm_color_lut *lut1,
 		((abs((long)lut2->green - lut1->green)) <= err);
 }
 
-static bool intel_color_lut_entry_equal(struct drm_color_lut *lut1,
-					struct drm_color_lut *lut2,
-					int lut_size, u32 err)
+static bool intel_color_lut_entries_equal(struct drm_color_lut *lut1,
+					  struct drm_color_lut *lut2,
+					  int lut_size, u32 err)
 {
 	int i;
 
@@ -1690,16 +1720,8 @@ bool intel_color_lut_equal(struct drm_property_blob *blob1,
 	lut_size2 = drm_color_lut_size(blob2);
 
 	/* check sw and hw lut size */
-	switch (gamma_mode) {
-	case GAMMA_MODE_MODE_8BIT:
-	case GAMMA_MODE_MODE_10BIT:
-		if (lut_size1 != lut_size2)
-			return false;
-		break;
-	default:
-		MISSING_CASE(gamma_mode);
-			return false;
-	}
+	if (lut_size1 != lut_size2)
+		return false;
 
 	lut1 = blob1->data;
 	lut2 = blob2->data;
@@ -1707,11 +1729,16 @@ bool intel_color_lut_equal(struct drm_property_blob *blob1,
 	err = 0xffff >> bit_precision;
 
 	/* check sw and hw lut entry to be equal */
-	switch (gamma_mode) {
+	switch (gamma_mode & GAMMA_MODE_MODE_MASK) {
 	case GAMMA_MODE_MODE_8BIT:
 	case GAMMA_MODE_MODE_10BIT:
-		if (!intel_color_lut_entry_equal(lut1, lut2,
-						 lut_size2, err))
+		if (!intel_color_lut_entries_equal(lut1, lut2,
+						   lut_size2, err))
+			return false;
+		break;
+	case GAMMA_MODE_MODE_12BIT_MULTI_SEGMENTED:
+		if (!intel_color_lut_entries_equal(lut1, lut2,
+						   9, err))
 			return false;
 		break;
 	default:
@@ -1946,6 +1973,63 @@ static void glk_read_luts(struct intel_crtc_state *crtc_state)
 		crtc_state->hw.gamma_lut = glk_read_lut_10(crtc, PAL_PREC_INDEX_VALUE(0));
 }
 
+static struct drm_property_blob *
+icl_read_lut_multi_segment(struct intel_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	int i, lut_size = INTEL_INFO(dev_priv)->color.gamma_lut_size;
+	enum pipe pipe = crtc->pipe;
+	struct drm_property_blob *blob;
+	struct drm_color_lut *lut;
+
+	blob = drm_property_create_blob(&dev_priv->drm,
+					sizeof(struct drm_color_lut) * lut_size,
+					NULL);
+	if (IS_ERR(blob))
+		return NULL;
+
+	lut = blob->data;
+
+	intel_de_write(dev_priv, PREC_PAL_MULTI_SEG_INDEX(pipe),
+		       PAL_PREC_AUTO_INCREMENT);
+
+	for (i = 0; i < 9; i++) {
+		u32 ldw = intel_de_read(dev_priv, PREC_PAL_MULTI_SEG_DATA(pipe));
+		u32 udw = intel_de_read(dev_priv, PREC_PAL_MULTI_SEG_DATA(pipe));
+
+		icl_lut_multi_seg_pack(&lut[i], ldw, udw);
+	}
+
+	intel_de_write(dev_priv, PREC_PAL_MULTI_SEG_INDEX(pipe), 0);
+
+	/*
+	 * FIXME readouts from PAL_PREC_DATA register aren't giving
+	 * correct values in the case of fine and coarse segments.
+	 * Restricting readouts only for super fine segment as of now.
+	 */
+
+	return blob;
+}
+
+static void icl_read_luts(struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+
+	if ((crtc_state->gamma_mode & POST_CSC_GAMMA_ENABLE) == 0)
+		return;
+
+	switch (crtc_state->gamma_mode & GAMMA_MODE_MODE_MASK) {
+	case GAMMA_MODE_MODE_8BIT:
+		crtc_state->hw.gamma_lut = ilk_read_lut_8(crtc);
+		break;
+	case GAMMA_MODE_MODE_12BIT_MULTI_SEGMENTED:
+		crtc_state->hw.gamma_lut = icl_read_lut_multi_segment(crtc);
+		break;
+	default:
+		crtc_state->hw.gamma_lut = glk_read_lut_10(crtc, PAL_PREC_INDEX_VALUE(0));
+	}
+}
+
 void intel_color_init(struct intel_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
@@ -1989,6 +2073,7 @@ void intel_color_init(struct intel_crtc *crtc)
 
 		if (INTEL_GEN(dev_priv) >= 11) {
 			dev_priv->display.load_luts = icl_load_luts;
+			dev_priv->display.read_luts = icl_read_luts;
 		} else if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) {
 			dev_priv->display.load_luts = glk_load_luts;
 			dev_priv->display.read_luts = glk_read_luts;
diff --git a/drivers/gpu/drm/i915/display/intel_connector.c b/drivers/gpu/drm/i915/display/intel_connector.c
index 903e49659f56..406e96785c76 100644
--- a/drivers/gpu/drm/i915/display/intel_connector.c
+++ b/drivers/gpu/drm/i915/display/intel_connector.c
@@ -33,6 +33,7 @@
 
 #include "i915_drv.h"
 #include "intel_connector.h"
+#include "intel_display_debugfs.h"
 #include "intel_display_types.h"
 #include "intel_hdcp.h"
 
@@ -123,6 +124,8 @@ int intel_connector_register(struct drm_connector *connector)
 		goto err_backlight;
 	}
 
+	intel_connector_debugfs_add(connector);
+
 	return 0;
 
 err_backlight:
@@ -290,7 +293,7 @@ intel_attach_colorspace_property(struct drm_connector *connector)
 			return;
 		break;
 	default:
-		DRM_DEBUG_KMS("Colorspace property not supported\n");
+		MISSING_CASE(connector->connector_type);
 		return;
 	}
 
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index 78f9b6cde810..2f5b9a4baafd 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -203,27 +203,31 @@ static void intel_crt_set_dpms(struct intel_encoder *encoder,
 	intel_de_write(dev_priv, crt->adpa_reg, adpa);
 }
 
-static void intel_disable_crt(struct intel_encoder *encoder,
+static void intel_disable_crt(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *old_crtc_state,
 			      const struct drm_connector_state *old_conn_state)
 {
 	intel_crt_set_dpms(encoder, old_crtc_state, DRM_MODE_DPMS_OFF);
 }
 
-static void pch_disable_crt(struct intel_encoder *encoder,
+static void pch_disable_crt(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
 			    const struct intel_crtc_state *old_crtc_state,
 			    const struct drm_connector_state *old_conn_state)
 {
 }
 
-static void pch_post_disable_crt(struct intel_encoder *encoder,
+static void pch_post_disable_crt(struct intel_atomic_state *state,
+				 struct intel_encoder *encoder,
 				 const struct intel_crtc_state *old_crtc_state,
 				 const struct drm_connector_state *old_conn_state)
 {
-	intel_disable_crt(encoder, old_crtc_state, old_conn_state);
+	intel_disable_crt(state, encoder, old_crtc_state, old_conn_state);
 }
 
-static void hsw_disable_crt(struct intel_encoder *encoder,
+static void hsw_disable_crt(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
 			    const struct intel_crtc_state *old_crtc_state,
 			    const struct drm_connector_state *old_conn_state)
 {
@@ -234,7 +238,8 @@ static void hsw_disable_crt(struct intel_encoder *encoder,
 	intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);
 }
 
-static void hsw_post_disable_crt(struct intel_encoder *encoder,
+static void hsw_post_disable_crt(struct intel_atomic_state *state,
+				 struct intel_encoder *encoder,
 				 const struct intel_crtc_state *old_crtc_state,
 				 const struct drm_connector_state *old_conn_state)
 {
@@ -250,19 +255,20 @@ static void hsw_post_disable_crt(struct intel_encoder *encoder,
 
 	intel_ddi_disable_pipe_clock(old_crtc_state);
 
-	pch_post_disable_crt(encoder, old_crtc_state, old_conn_state);
+	pch_post_disable_crt(state, encoder, old_crtc_state, old_conn_state);
 
 	lpt_disable_pch_transcoder(dev_priv);
 	lpt_disable_iclkip(dev_priv);
 
-	intel_ddi_fdi_post_disable(encoder, old_crtc_state, old_conn_state);
+	intel_ddi_fdi_post_disable(state, encoder, old_crtc_state, old_conn_state);
 
 	drm_WARN_ON(&dev_priv->drm, !old_crtc_state->has_pch_encoder);
 
 	intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true);
 }
 
-static void hsw_pre_pll_enable_crt(struct intel_encoder *encoder,
+static void hsw_pre_pll_enable_crt(struct intel_atomic_state *state,
+				   struct intel_encoder *encoder,
 				   const struct intel_crtc_state *crtc_state,
 				   const struct drm_connector_state *conn_state)
 {
@@ -273,7 +279,8 @@ static void hsw_pre_pll_enable_crt(struct intel_encoder *encoder,
 	intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);
 }
 
-static void hsw_pre_enable_crt(struct intel_encoder *encoder,
+static void hsw_pre_enable_crt(struct intel_atomic_state *state,
+			       struct intel_encoder *encoder,
 			       const struct intel_crtc_state *crtc_state,
 			       const struct drm_connector_state *conn_state)
 {
@@ -287,10 +294,11 @@ static void hsw_pre_enable_crt(struct intel_encoder *encoder,
 
 	hsw_fdi_link_train(encoder, crtc_state);
 
-	intel_ddi_enable_pipe_clock(crtc_state);
+	intel_ddi_enable_pipe_clock(encoder, crtc_state);
 }
 
-static void hsw_enable_crt(struct intel_encoder *encoder,
+static void hsw_enable_crt(struct intel_atomic_state *state,
+			   struct intel_encoder *encoder,
 			   const struct intel_crtc_state *crtc_state,
 			   const struct drm_connector_state *conn_state)
 {
@@ -300,6 +308,8 @@ static void hsw_enable_crt(struct intel_encoder *encoder,
 
 	drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder);
 
+	intel_ddi_enable_transcoder_func(encoder, crtc_state);
+
 	intel_enable_pipe(crtc_state);
 
 	lpt_pch_enable(crtc_state);
@@ -314,7 +324,8 @@ static void hsw_enable_crt(struct intel_encoder *encoder,
 	intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true);
 }
 
-static void intel_enable_crt(struct intel_encoder *encoder,
+static void intel_enable_crt(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
 			     const struct intel_crtc_state *crtc_state,
 			     const struct drm_connector_state *conn_state)
 {
@@ -594,7 +605,8 @@ static struct edid *intel_crt_get_edid(struct drm_connector *connector,
 	edid = drm_get_edid(connector, i2c);
 
 	if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
-		DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");
+		drm_dbg_kms(connector->dev,
+			    "CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");
 		intel_gmbus_force_bit(i2c, true);
 		edid = drm_get_edid(connector, i2c);
 		intel_gmbus_force_bit(i2c, false);
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 52db7852827b..5601673c3f30 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -568,7 +568,7 @@ static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_hdmi[] = {
 	{ 0x6, 0x7F, 0x35, 0x00, 0x0A },	/* 600   850      3.0   */
 };
 
-static const struct cnl_ddi_buf_trans ehl_combo_phy_ddi_translations_hbr2_hbr3[] = {
+static const struct cnl_ddi_buf_trans ehl_combo_phy_ddi_translations_dp[] = {
 						/* NT mV Trans mV db    */
 	{ 0xA, 0x33, 0x3F, 0x00, 0x00 },	/* 350   350      0.0   */
 	{ 0xA, 0x47, 0x36, 0x00, 0x09 },	/* 350   500      3.1   */
@@ -583,23 +583,51 @@ static const struct cnl_ddi_buf_trans ehl_combo_phy_ddi_translations_hbr2_hbr3[]
 };
 
 struct icl_mg_phy_ddi_buf_trans {
-	u32 cri_txdeemph_override_5_0;
 	u32 cri_txdeemph_override_11_6;
+	u32 cri_txdeemph_override_5_0;
 	u32 cri_txdeemph_override_17_12;
 };
 
-static const struct icl_mg_phy_ddi_buf_trans icl_mg_phy_ddi_translations[] = {
+static const struct icl_mg_phy_ddi_buf_trans icl_mg_phy_ddi_translations_rbr_hbr[] = {
 				/* Voltage swing  pre-emphasis */
-	{ 0x0, 0x1B, 0x00 },	/* 0              0   */
-	{ 0x0, 0x23, 0x08 },	/* 0              1   */
-	{ 0x0, 0x2D, 0x12 },	/* 0              2   */
-	{ 0x0, 0x00, 0x00 },	/* 0              3   */
-	{ 0x0, 0x23, 0x00 },	/* 1              0   */
-	{ 0x0, 0x2B, 0x09 },	/* 1              1   */
-	{ 0x0, 0x2E, 0x11 },	/* 1              2   */
-	{ 0x0, 0x2F, 0x00 },	/* 2              0   */
-	{ 0x0, 0x33, 0x0C },	/* 2              1   */
-	{ 0x0, 0x00, 0x00 },	/* 3              0   */
+	{ 0x18, 0x00, 0x00 },	/* 0              0   */
+	{ 0x1D, 0x00, 0x05 },	/* 0              1   */
+	{ 0x24, 0x00, 0x0C },	/* 0              2   */
+	{ 0x2B, 0x00, 0x14 },	/* 0              3   */
+	{ 0x21, 0x00, 0x00 },	/* 1              0   */
+	{ 0x2B, 0x00, 0x08 },	/* 1              1   */
+	{ 0x30, 0x00, 0x0F },	/* 1              2   */
+	{ 0x31, 0x00, 0x03 },	/* 2              0   */
+	{ 0x34, 0x00, 0x0B },	/* 2              1   */
+	{ 0x3F, 0x00, 0x00 },	/* 3              0   */
+};
+
+static const struct icl_mg_phy_ddi_buf_trans icl_mg_phy_ddi_translations_hbr2_hbr3[] = {
+				/* Voltage swing  pre-emphasis */
+	{ 0x18, 0x00, 0x00 },	/* 0              0   */
+	{ 0x1D, 0x00, 0x05 },	/* 0              1   */
+	{ 0x24, 0x00, 0x0C },	/* 0              2   */
+	{ 0x2B, 0x00, 0x14 },	/* 0              3   */
+	{ 0x26, 0x00, 0x00 },	/* 1              0   */
+	{ 0x2C, 0x00, 0x07 },	/* 1              1   */
+	{ 0x33, 0x00, 0x0C },	/* 1              2   */
+	{ 0x2E, 0x00, 0x00 },	/* 2              0   */
+	{ 0x36, 0x00, 0x09 },	/* 2              1   */
+	{ 0x3F, 0x00, 0x00 },	/* 3              0   */
+};
+
+static const struct icl_mg_phy_ddi_buf_trans icl_mg_phy_ddi_translations_hdmi[] = {
+				/* HDMI Preset	VS	Pre-emph */
+	{ 0x1A, 0x0, 0x0 },	/* 1		400mV	0dB */
+	{ 0x20, 0x0, 0x0 },	/* 2		500mV	0dB */
+	{ 0x29, 0x0, 0x0 },	/* 3		650mV	0dB */
+	{ 0x32, 0x0, 0x0 },	/* 4		800mV	0dB */
+	{ 0x3F, 0x0, 0x0 },	/* 5		1000mV	0dB */
+	{ 0x3A, 0x0, 0x5 },	/* 6		Full	-1.5 dB */
+	{ 0x39, 0x0, 0x6 },	/* 7		Full	-1.8 dB */
+	{ 0x38, 0x0, 0x7 },	/* 8		Full	-2 dB */
+	{ 0x37, 0x0, 0x8 },	/* 9		Full	-2.5 dB */
+	{ 0x36, 0x0, 0x9 },	/* 10		Full	-3 dB */
 };
 
 struct tgl_dkl_phy_ddi_buf_trans {
@@ -943,14 +971,29 @@ icl_get_combo_buf_trans(struct drm_i915_private *dev_priv, int type, int rate,
 	return icl_combo_phy_ddi_translations_dp_hbr2;
 }
 
+static const struct icl_mg_phy_ddi_buf_trans *
+icl_get_mg_buf_trans(struct drm_i915_private *dev_priv, int type, int rate,
+		     int *n_entries)
+{
+	if (type == INTEL_OUTPUT_HDMI) {
+		*n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations_hdmi);
+		return icl_mg_phy_ddi_translations_hdmi;
+	} else if (rate > 270000) {
+		*n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations_hbr2_hbr3);
+		return icl_mg_phy_ddi_translations_hbr2_hbr3;
+	}
+
+	*n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations_rbr_hbr);
+	return icl_mg_phy_ddi_translations_rbr_hbr;
+}
+
 static const struct cnl_ddi_buf_trans *
 ehl_get_combo_buf_trans(struct drm_i915_private *dev_priv, int type, int rate,
 			int *n_entries)
 {
-	if (type != INTEL_OUTPUT_HDMI && type != INTEL_OUTPUT_EDP &&
-	    rate > 270000) {
-		*n_entries = ARRAY_SIZE(ehl_combo_phy_ddi_translations_hbr2_hbr3);
-		return ehl_combo_phy_ddi_translations_hbr2_hbr3;
+	if (type != INTEL_OUTPUT_HDMI && type != INTEL_OUTPUT_EDP) {
+		*n_entries = ARRAY_SIZE(ehl_combo_phy_ddi_translations_dp);
+		return ehl_combo_phy_ddi_translations_dp;
 	}
 
 	return icl_get_combo_buf_trans(dev_priv, type, rate, n_entries);
@@ -989,7 +1032,8 @@ static int intel_ddi_hdmi_level(struct intel_encoder *encoder)
 			icl_get_combo_buf_trans(dev_priv, INTEL_OUTPUT_HDMI,
 						0, &n_entries);
 		else
-			n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
+			icl_get_mg_buf_trans(dev_priv, INTEL_OUTPUT_HDMI, 0,
+					     &n_entries);
 		default_entry = n_entries - 1;
 	} else if (IS_CANNONLAKE(dev_priv)) {
 		cnl_get_buf_trans_hdmi(dev_priv, &n_entries);
@@ -1103,7 +1147,8 @@ static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
 		if (intel_de_read(dev_priv, reg) & DDI_BUF_IS_IDLE)
 			return;
 	}
-	DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
+	drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c idle bit\n",
+		port_name(port));
 }
 
 static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
@@ -1216,7 +1261,10 @@ void hsw_fdi_link_train(struct intel_encoder *encoder,
 	for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) {
 		/* Configure DP_TP_CTL with auto-training */
 		intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
-			       DP_TP_CTL_FDI_AUTOTRAIN | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_ENABLE);
+			       DP_TP_CTL_FDI_AUTOTRAIN |
+			       DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+			       DP_TP_CTL_LINK_TRAIN_PAT1 |
+			       DP_TP_CTL_ENABLE);
 
 		/* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
 		 * DDI E does not support port reversal, the functionality is
@@ -1250,7 +1298,8 @@ void hsw_fdi_link_train(struct intel_encoder *encoder,
 
 		temp = intel_de_read(dev_priv, DP_TP_STATUS(PORT_E));
 		if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
-			DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
+			drm_dbg_kms(&dev_priv->drm,
+				    "FDI link training done on step %d\n", i);
 			break;
 		}
 
@@ -1259,7 +1308,7 @@ void hsw_fdi_link_train(struct intel_encoder *encoder,
 		 * Results in less fireworks from the state checker.
 		 */
 		if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) {
-			DRM_ERROR("FDI link training failed!\n");
+			drm_err(&dev_priv->drm, "FDI link training failed!\n");
 			break;
 		}
 
@@ -1291,7 +1340,10 @@ void hsw_fdi_link_train(struct intel_encoder *encoder,
 
 	/* Enable normal pixel sending for FDI */
 	intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
-		       DP_TP_CTL_FDI_AUTOTRAIN | DP_TP_CTL_LINK_TRAIN_NORMAL | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_ENABLE);
+		       DP_TP_CTL_FDI_AUTOTRAIN |
+		       DP_TP_CTL_LINK_TRAIN_NORMAL |
+		       DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+		       DP_TP_CTL_ENABLE);
 }
 
 static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder)
@@ -1305,27 +1357,6 @@ static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder)
 	intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
 }
 
-static struct intel_encoder *
-intel_ddi_get_crtc_encoder(struct intel_crtc *crtc)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct intel_encoder *encoder, *ret = NULL;
-	int num_encoders = 0;
-
-	for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
-		ret = encoder;
-		num_encoders++;
-	}
-
-	if (num_encoders != 1)
-		drm_WARN(dev, 1, "%d encoders on crtc for pipe %c\n",
-			 num_encoders,
-			 pipe_name(crtc->pipe));
-
-	BUG_ON(ret == NULL);
-	return ret;
-}
-
 static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv,
 				 enum port port)
 {
@@ -1451,6 +1482,14 @@ void intel_ddi_set_dp_msa(const struct intel_crtc_state *crtc_state,
 	intel_de_write(dev_priv, TRANS_MSA_MISC(cpu_transcoder), temp);
 }
 
+static u32 bdw_trans_port_sync_master_select(enum transcoder master_transcoder)
+{
+	if (master_transcoder == TRANSCODER_EDP)
+		return 0;
+	else
+		return master_transcoder + 1;
+}
+
 /*
  * Returns the TRANS_DDI_FUNC_CTL value based on CRTC state.
  *
@@ -1458,10 +1497,10 @@ void intel_ddi_set_dp_msa(const struct intel_crtc_state *crtc_state,
  * intel_ddi_config_transcoder_func().
  */
 static u32
-intel_ddi_transcoder_func_reg_val_get(const struct intel_crtc_state *crtc_state)
+intel_ddi_transcoder_func_reg_val_get(struct intel_encoder *encoder,
+				      const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
-	struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	enum pipe pipe = crtc->pipe;
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
@@ -1551,20 +1590,46 @@ intel_ddi_transcoder_func_reg_val_get(const struct intel_crtc_state *crtc_state)
 		temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
 	}
 
+	if (IS_GEN_RANGE(dev_priv, 8, 10) &&
+	    crtc_state->master_transcoder != INVALID_TRANSCODER) {
+		u8 master_select =
+			bdw_trans_port_sync_master_select(crtc_state->master_transcoder);
+
+		temp |= TRANS_DDI_PORT_SYNC_ENABLE |
+			TRANS_DDI_PORT_SYNC_MASTER_SELECT(master_select);
+	}
+
 	return temp;
 }
 
-void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
+void intel_ddi_enable_transcoder_func(struct intel_encoder *encoder,
+				      const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
-	u32 temp;
+	u32 ctl;
+
+	if (INTEL_GEN(dev_priv) >= 11) {
+		enum transcoder master_transcoder = crtc_state->master_transcoder;
+		u32 ctl2 = 0;
+
+		if (master_transcoder != INVALID_TRANSCODER) {
+			u8 master_select =
+				bdw_trans_port_sync_master_select(master_transcoder);
+
+			ctl2 |= PORT_SYNC_MODE_ENABLE |
+				PORT_SYNC_MODE_MASTER_SELECT(master_select);
+		}
+
+		intel_de_write(dev_priv,
+			       TRANS_DDI_FUNC_CTL2(cpu_transcoder), ctl2);
+	}
 
-	temp = intel_ddi_transcoder_func_reg_val_get(crtc_state);
+	ctl = intel_ddi_transcoder_func_reg_val_get(encoder, crtc_state);
 	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST))
-		temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC;
-	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
+		ctl |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC;
+	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), ctl);
 }
 
 /*
@@ -1572,16 +1637,17 @@ void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
  * bit.
  */
 static void
-intel_ddi_config_transcoder_func(const struct intel_crtc_state *crtc_state)
+intel_ddi_config_transcoder_func(struct intel_encoder *encoder,
+				 const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
-	u32 temp;
+	u32 ctl;
 
-	temp = intel_ddi_transcoder_func_reg_val_get(crtc_state);
-	temp &= ~TRANS_DDI_FUNC_ENABLE;
-	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
+	ctl = intel_ddi_transcoder_func_reg_val_get(encoder, crtc_state);
+	ctl &= ~TRANS_DDI_FUNC_ENABLE;
+	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), ctl);
 }
 
 void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state)
@@ -1589,24 +1655,35 @@ void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
-	u32 val;
+	u32 ctl;
+
+	if (INTEL_GEN(dev_priv) >= 11)
+		intel_de_write(dev_priv,
+			       TRANS_DDI_FUNC_CTL2(cpu_transcoder), 0);
+
+	ctl = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder));
 
-	val = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder));
-	val &= ~TRANS_DDI_FUNC_ENABLE;
+	ctl &= ~TRANS_DDI_FUNC_ENABLE;
+
+	if (IS_GEN_RANGE(dev_priv, 8, 10))
+		ctl &= ~(TRANS_DDI_PORT_SYNC_ENABLE |
+			 TRANS_DDI_PORT_SYNC_MASTER_SELECT_MASK);
 
 	if (INTEL_GEN(dev_priv) >= 12) {
 		if (!intel_dp_mst_is_master_trans(crtc_state)) {
-			val &= ~(TGL_TRANS_DDI_PORT_MASK |
+			ctl &= ~(TGL_TRANS_DDI_PORT_MASK |
 				 TRANS_DDI_MODE_SELECT_MASK);
 		}
 	} else {
-		val &= ~(TRANS_DDI_PORT_MASK | TRANS_DDI_MODE_SELECT_MASK);
+		ctl &= ~(TRANS_DDI_PORT_MASK | TRANS_DDI_MODE_SELECT_MASK);
 	}
-	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), val);
+
+	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), ctl);
 
 	if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME &&
 	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
-		DRM_DEBUG_KMS("Quirk Increase DDI disabled time\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "Quirk Increase DDI disabled time\n");
 		/* Quirk time at 100ms for reliable operation */
 		msleep(100);
 	}
@@ -1667,7 +1744,7 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
 		goto out;
 	}
 
-	if (HAS_TRANSCODER_EDP(dev_priv) && port == PORT_A)
+	if (HAS_TRANSCODER(dev_priv, TRANSCODER_EDP) && port == PORT_A)
 		cpu_transcoder = TRANSCODER_EDP;
 	else
 		cpu_transcoder = (enum transcoder) pipe;
@@ -1729,7 +1806,7 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
 	if (!(tmp & DDI_BUF_CTL_ENABLE))
 		goto out;
 
-	if (HAS_TRANSCODER_EDP(dev_priv) && port == PORT_A) {
+	if (HAS_TRANSCODER(dev_priv, TRANSCODER_EDP) && port == PORT_A) {
 		tmp = intel_de_read(dev_priv,
 				    TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
 
@@ -1787,20 +1864,23 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
 	}
 
 	if (!*pipe_mask)
-		DRM_DEBUG_KMS("No pipe for [ENCODER:%d:%s] found\n",
-			      encoder->base.base.id, encoder->base.name);
+		drm_dbg_kms(&dev_priv->drm,
+			    "No pipe for [ENCODER:%d:%s] found\n",
+			    encoder->base.base.id, encoder->base.name);
 
 	if (!mst_pipe_mask && hweight8(*pipe_mask) > 1) {
-		DRM_DEBUG_KMS("Multiple pipes for [ENCODER:%d:%s] (pipe_mask %02x)\n",
-			      encoder->base.base.id, encoder->base.name,
-			      *pipe_mask);
+		drm_dbg_kms(&dev_priv->drm,
+			    "Multiple pipes for [ENCODER:%d:%s] (pipe_mask %02x)\n",
+			    encoder->base.base.id, encoder->base.name,
+			    *pipe_mask);
 		*pipe_mask = BIT(ffs(*pipe_mask) - 1);
 	}
 
 	if (mst_pipe_mask && mst_pipe_mask != *pipe_mask)
-		DRM_DEBUG_KMS("Conflicting MST and non-MST state for [ENCODER:%d:%s] (pipe_mask %02x mst_pipe_mask %02x)\n",
-			      encoder->base.base.id, encoder->base.name,
-			      *pipe_mask, mst_pipe_mask);
+		drm_dbg_kms(&dev_priv->drm,
+			    "Conflicting MST and non-MST state for [ENCODER:%d:%s] (pipe_mask %02x mst_pipe_mask %02x)\n",
+			    encoder->base.base.id, encoder->base.name,
+			    *pipe_mask, mst_pipe_mask);
 	else
 		*is_dp_mst = mst_pipe_mask;
 
@@ -1810,9 +1890,9 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
 		if ((tmp & (BXT_PHY_CMNLANE_POWERDOWN_ACK |
 			    BXT_PHY_LANE_POWERDOWN_ACK |
 			    BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED)
-			DRM_ERROR("[ENCODER:%d:%s] enabled but PHY powered down? "
-				  "(PHY_CTL %08x)\n", encoder->base.base.id,
-				  encoder->base.name, tmp);
+			drm_err(&dev_priv->drm,
+				"[ENCODER:%d:%s] enabled but PHY powered down? (PHY_CTL %08x)\n",
+				encoder->base.base.id, encoder->base.name, tmp);
 	}
 
 	intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
@@ -1834,7 +1914,7 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
 	return true;
 }
 
-static inline enum intel_display_power_domain
+static enum intel_display_power_domain
 intel_ddi_main_link_aux_domain(struct intel_digital_port *dig_port)
 {
 	/* CNL+ HW requires corresponding AUX IOs to be powered up for PSR with
@@ -1893,11 +1973,11 @@ static void intel_ddi_get_power_domains(struct intel_encoder *encoder,
 					intel_dsc_power_domain(crtc_state));
 }
 
-void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state)
+void intel_ddi_enable_pipe_clock(struct intel_encoder *encoder,
+				 const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc);
 	enum port port = encoder->port;
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
 
@@ -1978,7 +2058,7 @@ static void skl_ddi_set_iboost(struct intel_encoder *encoder,
 
 	/* Make sure that the requested I_boost is valid */
 	if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) {
-		DRM_ERROR("Invalid I_boost value %u\n", iboost);
+		drm_err(&dev_priv->drm, "Invalid I_boost value %u\n", iboost);
 		return;
 	}
 
@@ -2037,7 +2117,8 @@ u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)
 			icl_get_combo_buf_trans(dev_priv, encoder->type,
 						intel_dp->link_rate, &n_entries);
 		else
-			n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
+			icl_get_mg_buf_trans(dev_priv, encoder->type,
+					     intel_dp->link_rate, &n_entries);
 	} else if (IS_CANNONLAKE(dev_priv)) {
 		if (encoder->type == INTEL_OUTPUT_EDP)
 			cnl_get_buf_trans_edp(dev_priv, &n_entries);
@@ -2237,7 +2318,9 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 		return;
 
 	if (level >= n_entries) {
-		DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.", level, n_entries - 1);
+		drm_dbg_kms(&dev_priv->drm,
+			    "DDI translation not found for level %d. Using %d instead.",
+			    level, n_entries - 1);
 		level = n_entries - 1;
 	}
 
@@ -2350,21 +2433,28 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 }
 
 static void icl_mg_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
-					   int link_clock,
-					   u32 level)
+					   int link_clock, u32 level,
+					   enum intel_output_type type)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum tc_port tc_port = intel_port_to_tc(dev_priv, encoder->port);
 	const struct icl_mg_phy_ddi_buf_trans *ddi_translations;
 	u32 n_entries, val;
-	int ln;
+	int ln, rate = 0;
 
-	n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
-	ddi_translations = icl_mg_phy_ddi_translations;
+	if (type != INTEL_OUTPUT_HDMI) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+		rate = intel_dp->link_rate;
+	}
+
+	ddi_translations = icl_get_mg_buf_trans(dev_priv, type, rate,
+						&n_entries);
 	/* The table does not have values for level 3 and level 9. */
 	if (level >= n_entries || level == 3 || level == 9) {
-		DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.",
-			      level, n_entries - 2);
+		drm_dbg_kms(&dev_priv->drm,
+			    "DDI translation not found for level %d. Using %d instead.",
+			    level, n_entries - 2);
 		level = n_entries - 2;
 	}
 
@@ -2483,7 +2573,8 @@ static void icl_ddi_vswing_sequence(struct intel_encoder *encoder,
 	if (intel_phy_is_combo(dev_priv, phy))
 		icl_combo_phy_ddi_vswing_sequence(encoder, level, type);
 	else
-		icl_mg_phy_ddi_vswing_sequence(encoder, link_clock, level);
+		icl_mg_phy_ddi_vswing_sequence(encoder, link_clock, level,
+					       type);
 }
 
 static void
@@ -2550,8 +2641,9 @@ static void tgl_ddi_vswing_sequence(struct intel_encoder *encoder,
 		tgl_dkl_phy_ddi_vswing_sequence(encoder, link_clock, level);
 }
 
-static u32 translate_signal_level(int signal_levels)
+static u32 translate_signal_level(struct intel_dp *intel_dp, int signal_levels)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(index_to_dp_signal_levels); i++) {
@@ -2559,8 +2651,9 @@ static u32 translate_signal_level(int signal_levels)
 			return i;
 	}
 
-	WARN(1, "Unsupported voltage swing/pre-emphasis level: 0x%x\n",
-	     signal_levels);
+	drm_WARN(&i915->drm, 1,
+		 "Unsupported voltage swing/pre-emphasis level: 0x%x\n",
+		 signal_levels);
 
 	return 0;
 }
@@ -2571,46 +2664,73 @@ static u32 intel_ddi_dp_level(struct intel_dp *intel_dp)
 	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
 					 DP_TRAIN_PRE_EMPHASIS_MASK);
 
-	return translate_signal_level(signal_levels);
+	return translate_signal_level(intel_dp, signal_levels);
 }
 
-u32 bxt_signal_levels(struct intel_dp *intel_dp)
+static void
+tgl_set_signal_levels(struct intel_dp *intel_dp)
 {
-	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
-	struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
-	struct intel_encoder *encoder = &dport->base;
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
 	int level = intel_ddi_dp_level(intel_dp);
 
-	if (INTEL_GEN(dev_priv) >= 12)
-		tgl_ddi_vswing_sequence(encoder, intel_dp->link_rate,
-					level, encoder->type);
-	else if (INTEL_GEN(dev_priv) >= 11)
-		icl_ddi_vswing_sequence(encoder, intel_dp->link_rate,
-					level, encoder->type);
-	else if (IS_CANNONLAKE(dev_priv))
-		cnl_ddi_vswing_sequence(encoder, level, encoder->type);
-	else
-		bxt_ddi_vswing_sequence(encoder, level, encoder->type);
+	tgl_ddi_vswing_sequence(encoder, intel_dp->link_rate,
+				level, encoder->type);
+}
 
-	return 0;
+static void
+icl_set_signal_levels(struct intel_dp *intel_dp)
+{
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	int level = intel_ddi_dp_level(intel_dp);
+
+	icl_ddi_vswing_sequence(encoder, intel_dp->link_rate,
+				level, encoder->type);
 }
 
-u32 ddi_signal_levels(struct intel_dp *intel_dp)
+static void
+cnl_set_signal_levels(struct intel_dp *intel_dp)
 {
-	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
-	struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
-	struct intel_encoder *encoder = &dport->base;
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	int level = intel_ddi_dp_level(intel_dp);
+
+	cnl_ddi_vswing_sequence(encoder, level, encoder->type);
+}
+
+static void
+bxt_set_signal_levels(struct intel_dp *intel_dp)
+{
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
 	int level = intel_ddi_dp_level(intel_dp);
 
+	bxt_ddi_vswing_sequence(encoder, level, encoder->type);
+}
+
+static void
+hsw_set_signal_levels(struct intel_dp *intel_dp)
+{
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	int level = intel_ddi_dp_level(intel_dp);
+	enum port port = encoder->port;
+	u32 signal_levels;
+
+	signal_levels = DDI_BUF_TRANS_SELECT(level);
+
+	drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n",
+		    signal_levels);
+
+	intel_dp->DP &= ~DDI_BUF_EMP_MASK;
+	intel_dp->DP |= signal_levels;
+
 	if (IS_GEN9_BC(dev_priv))
 		skl_ddi_set_iboost(encoder, level, encoder->type);
 
-	return DDI_BUF_TRANS_SELECT(level);
+	intel_de_write(dev_priv, DDI_BUF_CTL(port), intel_dp->DP);
+	intel_de_posting_read(dev_priv, DDI_BUF_CTL(port));
 }
 
-static inline
-u32 icl_dpclka_cfgcr0_clk_off(struct drm_i915_private *dev_priv,
-			      enum phy phy)
+static u32 icl_dpclka_cfgcr0_clk_off(struct drm_i915_private *dev_priv,
+				     enum phy phy)
 {
 	if (intel_phy_is_combo(dev_priv, phy)) {
 		return ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
@@ -2698,8 +2818,9 @@ static void icl_sanitize_port_clk_off(struct drm_i915_private *dev_priv,
 		if (drm_WARN_ON(&dev_priv->drm, ddi_clk_needed))
 			continue;
 
-		DRM_NOTE("PHY %c is disabled/in DSI mode with an ungated DDI clock, gate it\n",
-			 phy_name(phy));
+		drm_notice(&dev_priv->drm,
+			   "PHY %c is disabled/in DSI mode with an ungated DDI clock, gate it\n",
+			   phy_name(phy));
 		val |= icl_dpclka_cfgcr0_clk_off(dev_priv, phy);
 		intel_de_write(dev_priv, ICL_DPCLKA_CFGCR0, val);
 	}
@@ -2936,11 +3057,14 @@ icl_program_mg_dp_mode(struct intel_digital_port *intel_dig_port,
 static void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp,
 					const struct intel_crtc_state *crtc_state)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+
 	if (!crtc_state->fec_enable)
 		return;
 
 	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_FEC_CONFIGURATION, DP_FEC_READY) <= 0)
-		DRM_DEBUG_KMS("Failed to set FEC_READY in the sink\n");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to set FEC_READY in the sink\n");
 }
 
 static void intel_ddi_enable_fec(struct intel_encoder *encoder,
@@ -2960,7 +3084,8 @@ static void intel_ddi_enable_fec(struct intel_encoder *encoder,
 
 	if (intel_de_wait_for_set(dev_priv, intel_dp->regs.dp_tp_status,
 				  DP_TP_STATUS_FEC_ENABLE_LIVE, 1))
-		DRM_ERROR("Timed out waiting for FEC Enable Status\n");
+		drm_err(&dev_priv->drm,
+			"Timed out waiting for FEC Enable Status\n");
 }
 
 static void intel_ddi_disable_fec_state(struct intel_encoder *encoder,
@@ -2980,7 +3105,8 @@ static void intel_ddi_disable_fec_state(struct intel_encoder *encoder,
 	intel_de_posting_read(dev_priv, intel_dp->regs.dp_tp_ctl);
 }
 
-static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
+static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state)
 {
@@ -3048,13 +3174,13 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
 	 * 7.a Configure Transcoder Clock Select to direct the Port clock to the
 	 * Transcoder.
 	 */
-	intel_ddi_enable_pipe_clock(crtc_state);
+	intel_ddi_enable_pipe_clock(encoder, crtc_state);
 
 	/*
 	 * 7.b Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
 	 * Transport Select
 	 */
-	intel_ddi_config_transcoder_func(crtc_state);
+	intel_ddi_config_transcoder_func(encoder, crtc_state);
 
 	/*
 	 * 7.c Configure & enable DP_TP_CTL with link training pattern 1
@@ -3120,7 +3246,8 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
 	intel_dsc_enable(encoder, crtc_state);
 }
 
-static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,
+static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state)
 {
@@ -3185,21 +3312,22 @@ static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,
 	intel_ddi_enable_fec(encoder, crtc_state);
 
 	if (!is_mst)
-		intel_ddi_enable_pipe_clock(crtc_state);
+		intel_ddi_enable_pipe_clock(encoder, crtc_state);
 
 	intel_dsc_enable(encoder, crtc_state);
 }
 
-static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
+static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state,
+				    struct intel_encoder *encoder,
 				    const struct intel_crtc_state *crtc_state,
 				    const struct drm_connector_state *conn_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 
 	if (INTEL_GEN(dev_priv) >= 12)
-		tgl_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
+		tgl_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
 	else
-		hsw_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
+		hsw_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
 
 	/* MST will call a setting of MSA after an allocating of Virtual Channel
 	 * from MST encoder pre_enable callback.
@@ -3211,7 +3339,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
 	}
 }
 
-static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
+static void intel_ddi_pre_enable_hdmi(struct intel_atomic_state *state,
+				      struct intel_encoder *encoder,
 				      const struct intel_crtc_state *crtc_state,
 				      const struct drm_connector_state *conn_state)
 {
@@ -3244,14 +3373,15 @@ static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
 	if (IS_GEN9_BC(dev_priv))
 		skl_ddi_set_iboost(encoder, level, INTEL_OUTPUT_HDMI);
 
-	intel_ddi_enable_pipe_clock(crtc_state);
+	intel_ddi_enable_pipe_clock(encoder, crtc_state);
 
 	intel_dig_port->set_infoframes(encoder,
 				       crtc_state->has_infoframe,
 				       crtc_state, conn_state);
 }
 
-static void intel_ddi_pre_enable(struct intel_encoder *encoder,
+static void intel_ddi_pre_enable(struct intel_atomic_state *state,
+				 struct intel_encoder *encoder,
 				 const struct intel_crtc_state *crtc_state,
 				 const struct drm_connector_state *conn_state)
 {
@@ -3280,12 +3410,14 @@ static void intel_ddi_pre_enable(struct intel_encoder *encoder,
 	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
 
 	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
-		intel_ddi_pre_enable_hdmi(encoder, crtc_state, conn_state);
+		intel_ddi_pre_enable_hdmi(state, encoder, crtc_state,
+					  conn_state);
 	} else {
 		struct intel_lspcon *lspcon =
 				enc_to_intel_lspcon(encoder);
 
-		intel_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
+		intel_ddi_pre_enable_dp(state, encoder, crtc_state,
+					conn_state);
 		if (lspcon->active) {
 			struct intel_digital_port *dig_port =
 					enc_to_dig_port(encoder);
@@ -3328,7 +3460,8 @@ static void intel_disable_ddi_buf(struct intel_encoder *encoder,
 		intel_wait_ddi_buf_idle(dev_priv, port);
 }
 
-static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
+static void intel_ddi_post_disable_dp(struct intel_atomic_state *state,
+				      struct intel_encoder *encoder,
 				      const struct intel_crtc_state *old_crtc_state,
 				      const struct drm_connector_state *old_conn_state)
 {
@@ -3384,7 +3517,8 @@ static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
 	intel_ddi_clk_disable(encoder);
 }
 
-static void intel_ddi_post_disable_hdmi(struct intel_encoder *encoder,
+static void intel_ddi_post_disable_hdmi(struct intel_atomic_state *state,
+					struct intel_encoder *encoder,
 					const struct intel_crtc_state *old_crtc_state,
 					const struct drm_connector_state *old_conn_state)
 {
@@ -3407,22 +3541,8 @@ static void intel_ddi_post_disable_hdmi(struct intel_encoder *encoder,
 	intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
 }
 
-static void icl_disable_transcoder_port_sync(const struct intel_crtc_state *old_crtc_state)
-{
-	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
-	if (old_crtc_state->master_transcoder == INVALID_TRANSCODER)
-		return;
-
-	DRM_DEBUG_KMS("Disabling Transcoder Port Sync on Slave Transcoder %s\n",
-		      transcoder_name(old_crtc_state->cpu_transcoder));
-
-	intel_de_write(dev_priv,
-		       TRANS_DDI_FUNC_CTL2(old_crtc_state->cpu_transcoder), 0);
-}
-
-static void intel_ddi_post_disable(struct intel_encoder *encoder,
+static void intel_ddi_post_disable(struct intel_atomic_state *state,
+				   struct intel_encoder *encoder,
 				   const struct intel_crtc_state *old_crtc_state,
 				   const struct drm_connector_state *old_conn_state)
 {
@@ -3436,9 +3556,6 @@ static void intel_ddi_post_disable(struct intel_encoder *encoder,
 
 		intel_disable_pipe(old_crtc_state);
 
-		if (INTEL_GEN(dev_priv) >= 11)
-			icl_disable_transcoder_port_sync(old_crtc_state);
-
 		intel_ddi_disable_transcoder_func(old_crtc_state);
 
 		intel_dsc_disable(old_crtc_state);
@@ -3463,11 +3580,11 @@ static void intel_ddi_post_disable(struct intel_encoder *encoder,
 	 */
 
 	if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
-		intel_ddi_post_disable_hdmi(encoder,
-					    old_crtc_state, old_conn_state);
+		intel_ddi_post_disable_hdmi(state, encoder, old_crtc_state,
+					    old_conn_state);
 	else
-		intel_ddi_post_disable_dp(encoder,
-					  old_crtc_state, old_conn_state);
+		intel_ddi_post_disable_dp(state, encoder, old_crtc_state,
+					  old_conn_state);
 
 	if (INTEL_GEN(dev_priv) >= 11)
 		icl_unmap_plls_to_ports(encoder);
@@ -3480,7 +3597,8 @@ static void intel_ddi_post_disable(struct intel_encoder *encoder,
 		intel_tc_port_put_link(dig_port);
 }
 
-void intel_ddi_fdi_post_disable(struct intel_encoder *encoder,
+void intel_ddi_fdi_post_disable(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
 				const struct intel_crtc_state *old_crtc_state,
 				const struct drm_connector_state *old_conn_state)
 {
@@ -3514,7 +3632,43 @@ void intel_ddi_fdi_post_disable(struct intel_encoder *encoder,
 	intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), val);
 }
 
-static void intel_enable_ddi_dp(struct intel_encoder *encoder,
+static void trans_port_sync_stop_link_train(struct intel_atomic_state *state,
+					    struct intel_encoder *encoder,
+					    const struct intel_crtc_state *crtc_state)
+{
+	const struct drm_connector_state *conn_state;
+	struct drm_connector *conn;
+	int i;
+
+	if (!crtc_state->sync_mode_slaves_mask)
+		return;
+
+	for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
+		struct intel_encoder *slave_encoder =
+			to_intel_encoder(conn_state->best_encoder);
+		struct intel_crtc *slave_crtc = to_intel_crtc(conn_state->crtc);
+		const struct intel_crtc_state *slave_crtc_state;
+
+		if (!slave_crtc)
+			continue;
+
+		slave_crtc_state =
+			intel_atomic_get_new_crtc_state(state, slave_crtc);
+
+		if (slave_crtc_state->master_transcoder !=
+		    crtc_state->cpu_transcoder)
+			continue;
+
+		intel_dp_stop_link_train(enc_to_intel_dp(slave_encoder));
+	}
+
+	usleep_range(200, 400);
+
+	intel_dp_stop_link_train(enc_to_intel_dp(encoder));
+}
+
+static void intel_enable_ddi_dp(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
 				const struct intel_crtc_state *crtc_state,
 				const struct drm_connector_state *conn_state)
 {
@@ -3533,6 +3687,8 @@ static void intel_enable_ddi_dp(struct intel_encoder *encoder,
 
 	if (crtc_state->has_audio)
 		intel_audio_codec_enable(encoder, crtc_state, conn_state);
+
+	trans_port_sync_stop_link_train(state, encoder, crtc_state);
 }
 
 static i915_reg_t
@@ -3555,7 +3711,8 @@ gen9_chicken_trans_reg_by_port(struct drm_i915_private *dev_priv,
 	return CHICKEN_TRANS(trans[port]);
 }
 
-static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
+static void intel_enable_ddi_hdmi(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state)
 {
@@ -3567,9 +3724,9 @@ static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
 	if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
 					       crtc_state->hdmi_high_tmds_clock_ratio,
 					       crtc_state->hdmi_scrambling))
-		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to configure sink "
-			      "scrambling/TMDS bit clock ratio\n",
-			       connector->base.id, connector->name);
+		drm_dbg_kms(&dev_priv->drm,
+			    "[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
+			    connector->base.id, connector->name);
 
 	/* Display WA #1143: skl,kbl,cfl */
 	if (IS_GEN9_BC(dev_priv)) {
@@ -3617,20 +3774,23 @@ static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
 		intel_audio_codec_enable(encoder, crtc_state, conn_state);
 }
 
-static void intel_enable_ddi(struct intel_encoder *encoder,
+static void intel_enable_ddi(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
 			     const struct intel_crtc_state *crtc_state,
 			     const struct drm_connector_state *conn_state)
 {
-	WARN_ON(crtc_state->has_pch_encoder);
+	drm_WARN_ON(state->base.dev, crtc_state->has_pch_encoder);
+
+	intel_ddi_enable_transcoder_func(encoder, crtc_state);
 
 	intel_enable_pipe(crtc_state);
 
 	intel_crtc_vblank_on(crtc_state);
 
 	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
-		intel_enable_ddi_hdmi(encoder, crtc_state, conn_state);
+		intel_enable_ddi_hdmi(state, encoder, crtc_state, conn_state);
 	else
-		intel_enable_ddi_dp(encoder, crtc_state, conn_state);
+		intel_enable_ddi_dp(state, encoder, crtc_state, conn_state);
 
 	/* Enable hdcp if it's desired */
 	if (conn_state->content_protection ==
@@ -3640,7 +3800,8 @@ static void intel_enable_ddi(struct intel_encoder *encoder,
 				  (u8)conn_state->hdcp_content_type);
 }
 
-static void intel_disable_ddi_dp(struct intel_encoder *encoder,
+static void intel_disable_ddi_dp(struct intel_atomic_state *state,
+				 struct intel_encoder *encoder,
 				 const struct intel_crtc_state *old_crtc_state,
 				 const struct drm_connector_state *old_conn_state)
 {
@@ -3660,10 +3821,12 @@ static void intel_disable_ddi_dp(struct intel_encoder *encoder,
 					      false);
 }
 
-static void intel_disable_ddi_hdmi(struct intel_encoder *encoder,
+static void intel_disable_ddi_hdmi(struct intel_atomic_state *state,
+				   struct intel_encoder *encoder,
 				   const struct intel_crtc_state *old_crtc_state,
 				   const struct drm_connector_state *old_conn_state)
 {
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	struct drm_connector *connector = old_conn_state->connector;
 
 	if (old_crtc_state->has_audio)
@@ -3672,23 +3835,28 @@ static void intel_disable_ddi_hdmi(struct intel_encoder *encoder,
 
 	if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
 					       false, false))
-		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n",
-			      connector->base.id, connector->name);
+		drm_dbg_kms(&i915->drm,
+			    "[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n",
+			    connector->base.id, connector->name);
 }
 
-static void intel_disable_ddi(struct intel_encoder *encoder,
+static void intel_disable_ddi(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *old_crtc_state,
 			      const struct drm_connector_state *old_conn_state)
 {
 	intel_hdcp_disable(to_intel_connector(old_conn_state->connector));
 
 	if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
-		intel_disable_ddi_hdmi(encoder, old_crtc_state, old_conn_state);
+		intel_disable_ddi_hdmi(state, encoder, old_crtc_state,
+				       old_conn_state);
 	else
-		intel_disable_ddi_dp(encoder, old_crtc_state, old_conn_state);
+		intel_disable_ddi_dp(state, encoder, old_crtc_state,
+				     old_conn_state);
 }
 
-static void intel_ddi_update_pipe_dp(struct intel_encoder *encoder,
+static void intel_ddi_update_pipe_dp(struct intel_atomic_state *state,
+				     struct intel_encoder *encoder,
 				     const struct intel_crtc_state *crtc_state,
 				     const struct drm_connector_state *conn_state)
 {
@@ -3699,18 +3867,20 @@ static void intel_ddi_update_pipe_dp(struct intel_encoder *encoder,
 	intel_psr_update(intel_dp, crtc_state);
 	intel_edp_drrs_enable(intel_dp, crtc_state);
 
-	intel_panel_update_backlight(encoder, crtc_state, conn_state);
+	intel_panel_update_backlight(state, encoder, crtc_state, conn_state);
 }
 
-static void intel_ddi_update_pipe(struct intel_encoder *encoder,
+static void intel_ddi_update_pipe(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state)
 {
 
 	if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
-		intel_ddi_update_pipe_dp(encoder, crtc_state, conn_state);
+		intel_ddi_update_pipe_dp(state, encoder, crtc_state,
+					 conn_state);
 
-	intel_hdcp_update_pipe(encoder, crtc_state, conn_state);
+	intel_hdcp_update_pipe(state, encoder, crtc_state, conn_state);
 }
 
 static void
@@ -3722,7 +3892,7 @@ intel_ddi_update_prepare(struct intel_atomic_state *state,
 		crtc ? intel_atomic_get_new_crtc_state(state, crtc) : NULL;
 	int required_lanes = crtc_state ? crtc_state->lane_count : 1;
 
-	WARN_ON(crtc && crtc->active);
+	drm_WARN_ON(state->base.dev, crtc && crtc->active);
 
 	intel_tc_port_get_link(enc_to_dig_port(encoder),
 		               required_lanes);
@@ -3739,7 +3909,8 @@ intel_ddi_update_complete(struct intel_atomic_state *state,
 }
 
 static void
-intel_ddi_pre_pll_enable(struct intel_encoder *encoder,
+intel_ddi_pre_pll_enable(struct intel_atomic_state *state,
+			 struct intel_encoder *encoder,
 			 const struct intel_crtc_state *crtc_state,
 			 const struct drm_connector_state *conn_state)
 {
@@ -3813,6 +3984,74 @@ static void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
 	udelay(600);
 }
 
+static void intel_ddi_set_link_train(struct intel_dp *intel_dp,
+				     u8 dp_train_pat)
+{
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	u8 train_pat_mask = drm_dp_training_pattern_mask(intel_dp->dpcd);
+	enum port port = dp_to_dig_port(intel_dp)->base.port;
+	u32 temp;
+
+	temp = intel_de_read(dev_priv, intel_dp->regs.dp_tp_ctl);
+
+	if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
+		temp |= DP_TP_CTL_SCRAMBLE_DISABLE;
+	else
+		temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE;
+
+	temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
+	switch (dp_train_pat & train_pat_mask) {
+	case DP_TRAINING_PATTERN_DISABLE:
+		temp |= DP_TP_CTL_LINK_TRAIN_NORMAL;
+		break;
+	case DP_TRAINING_PATTERN_1:
+		temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
+		break;
+	case DP_TRAINING_PATTERN_2:
+		temp |= DP_TP_CTL_LINK_TRAIN_PAT2;
+		break;
+	case DP_TRAINING_PATTERN_3:
+		temp |= DP_TP_CTL_LINK_TRAIN_PAT3;
+		break;
+	case DP_TRAINING_PATTERN_4:
+		temp |= DP_TP_CTL_LINK_TRAIN_PAT4;
+		break;
+	}
+
+	intel_de_write(dev_priv, intel_dp->regs.dp_tp_ctl, temp);
+
+	intel_de_write(dev_priv, DDI_BUF_CTL(port), intel_dp->DP);
+	intel_de_posting_read(dev_priv, DDI_BUF_CTL(port));
+}
+
+static void intel_ddi_set_idle_link_train(struct intel_dp *intel_dp)
+{
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum port port = encoder->port;
+	u32 val;
+
+	val = intel_de_read(dev_priv, intel_dp->regs.dp_tp_ctl);
+	val &= ~DP_TP_CTL_LINK_TRAIN_MASK;
+	val |= DP_TP_CTL_LINK_TRAIN_IDLE;
+	intel_de_write(dev_priv, intel_dp->regs.dp_tp_ctl, val);
+
+	/*
+	 * Until TGL on PORT_A we can have only eDP in SST mode. There the only
+	 * reason we need to set idle transmission mode is to work around a HW
+	 * issue where we enable the pipe while not in idle link-training mode.
+	 * In this case there is requirement to wait for a minimum number of
+	 * idle patterns to be sent.
+	 */
+	if (port == PORT_A && INTEL_GEN(dev_priv) < 12)
+		return;
+
+	if (intel_de_wait_for_set(dev_priv, intel_dp->regs.dp_tp_status,
+				  DP_TP_STATUS_IDLE_DONE, 1))
+		drm_err(&dev_priv->drm,
+			"Timed out waiting for DP idle patterns\n");
+}
+
 static bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv,
 				       enum transcoder cpu_transcoder)
 {
@@ -3839,6 +4078,66 @@ void intel_ddi_compute_min_voltage_level(struct drm_i915_private *dev_priv,
 		crtc_state->min_voltage_level = 2;
 }
 
+static enum transcoder bdw_transcoder_master_readout(struct drm_i915_private *dev_priv,
+						     enum transcoder cpu_transcoder)
+{
+	u32 master_select;
+
+	if (INTEL_GEN(dev_priv) >= 11) {
+		u32 ctl2 = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL2(cpu_transcoder));
+
+		if ((ctl2 & PORT_SYNC_MODE_ENABLE) == 0)
+			return INVALID_TRANSCODER;
+
+		master_select = REG_FIELD_GET(PORT_SYNC_MODE_MASTER_SELECT_MASK, ctl2);
+	} else {
+		u32 ctl = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder));
+
+		if ((ctl & TRANS_DDI_PORT_SYNC_ENABLE) == 0)
+			return INVALID_TRANSCODER;
+
+		master_select = REG_FIELD_GET(TRANS_DDI_PORT_SYNC_MASTER_SELECT_MASK, ctl);
+	}
+
+	if (master_select == 0)
+		return TRANSCODER_EDP;
+	else
+		return master_select - 1;
+}
+
+static void bdw_get_trans_port_sync_config(struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
+	u32 transcoders = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) |
+		BIT(TRANSCODER_C) | BIT(TRANSCODER_D);
+	enum transcoder cpu_transcoder;
+
+	crtc_state->master_transcoder =
+		bdw_transcoder_master_readout(dev_priv, crtc_state->cpu_transcoder);
+
+	for_each_cpu_transcoder_masked(dev_priv, cpu_transcoder, transcoders) {
+		enum intel_display_power_domain power_domain;
+		intel_wakeref_t trans_wakeref;
+
+		power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
+		trans_wakeref = intel_display_power_get_if_enabled(dev_priv,
+								   power_domain);
+
+		if (!trans_wakeref)
+			continue;
+
+		if (bdw_transcoder_master_readout(dev_priv, cpu_transcoder) ==
+		    crtc_state->cpu_transcoder)
+			crtc_state->sync_mode_slaves_mask |= BIT(cpu_transcoder);
+
+		intel_display_power_put(dev_priv, power_domain, trans_wakeref);
+	}
+
+	drm_WARN_ON(&dev_priv->drm,
+		    crtc_state->master_transcoder != INVALID_TRANSCODER &&
+		    crtc_state->sync_mode_slaves_mask);
+}
+
 void intel_ddi_get_config(struct intel_encoder *encoder,
 			  struct intel_crtc_state *pipe_config)
 {
@@ -3930,9 +4229,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 			pipe_config->fec_enable =
 				intel_de_read(dev_priv, dp_tp_ctl) & DP_TP_CTL_FEC_ENABLE;
 
-			DRM_DEBUG_KMS("[ENCODER:%d:%s] Fec status: %u\n",
-				      encoder->base.base.id, encoder->base.name,
-				      pipe_config->fec_enable);
+			drm_dbg_kms(&dev_priv->drm,
+				    "[ENCODER:%d:%s] Fec status: %u\n",
+				    encoder->base.base.id, encoder->base.name,
+				    pipe_config->fec_enable);
 		}
 
 		break;
@@ -3969,8 +4269,9 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 		 * up by the BIOS, and thus we can't get the mode at module
 		 * load.
 		 */
-		DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
-			      pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
+		drm_dbg_kms(&dev_priv->drm,
+			    "pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
+			    pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
 		dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
 	}
 
@@ -3996,6 +4297,9 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 	intel_read_infoframe(encoder, pipe_config,
 			     HDMI_INFOFRAME_TYPE_DRM,
 			     &pipe_config->infoframes.drm);
+
+	if (INTEL_GEN(dev_priv) >= 8)
+		bdw_get_trans_port_sync_config(pipe_config);
 }
 
 static enum intel_output_type
@@ -4025,7 +4329,7 @@ static int intel_ddi_compute_config(struct intel_encoder *encoder,
 	enum port port = encoder->port;
 	int ret;
 
-	if (HAS_TRANSCODER_EDP(dev_priv) && port == PORT_A)
+	if (HAS_TRANSCODER(dev_priv, TRANSCODER_EDP) && port == PORT_A)
 		pipe_config->cpu_transcoder = TRANSCODER_EDP;
 
 	if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI)) {
@@ -4097,7 +4401,11 @@ intel_ddi_port_sync_transcoders(const struct intel_crtc_state *ref_crtc_state,
 	u8 transcoders = 0;
 	int i;
 
-	if (INTEL_GEN(dev_priv) < 11)
+	/*
+	 * We don't enable port sync on BDW due to missing w/as and
+	 * due to not having adjusted the modeset sequence appropriately.
+	 */
+	if (INTEL_GEN(dev_priv) < 9)
 		return 0;
 
 	if (!intel_crtc_has_type(ref_crtc_state, INTEL_OUTPUT_DP))
@@ -4129,12 +4437,13 @@ static int intel_ddi_compute_config_late(struct intel_encoder *encoder,
 					 struct intel_crtc_state *crtc_state,
 					 struct drm_connector_state *conn_state)
 {
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	struct drm_connector *connector = conn_state->connector;
 	u8 port_sync_transcoders = 0;
 
-	DRM_DEBUG_KMS("[ENCODER:%d:%s] [CRTC:%d:%s]",
-		      encoder->base.base.id, encoder->base.name,
-		      crtc_state->uapi.crtc->base.id, crtc_state->uapi.crtc->name);
+	drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] [CRTC:%d:%s]",
+		    encoder->base.base.id, encoder->base.name,
+		    crtc_state->uapi.crtc->base.id, crtc_state->uapi.crtc->name);
 
 	if (connector->has_tile)
 		port_sync_transcoders = intel_ddi_port_sync_transcoders(crtc_state,
@@ -4187,6 +4496,20 @@ intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port)
 	intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
 	intel_dig_port->dp.prepare_link_retrain =
 		intel_ddi_prepare_link_retrain;
+	intel_dig_port->dp.set_link_train = intel_ddi_set_link_train;
+	intel_dig_port->dp.set_idle_link_train = intel_ddi_set_idle_link_train;
+
+	if (INTEL_GEN(dev_priv) >= 12)
+		intel_dig_port->dp.set_signal_levels = tgl_set_signal_levels;
+	else if (INTEL_GEN(dev_priv) >= 11)
+		intel_dig_port->dp.set_signal_levels = icl_set_signal_levels;
+	else if (IS_CANNONLAKE(dev_priv))
+		intel_dig_port->dp.set_signal_levels = cnl_set_signal_levels;
+	else if (IS_GEN9_LP(dev_priv))
+		intel_dig_port->dp.set_signal_levels = bxt_set_signal_levels;
+	else
+		intel_dig_port->dp.set_signal_levels = hsw_set_signal_levels;
+
 	if (INTEL_GEN(dev_priv) < 12) {
 		intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
 		intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
@@ -4278,7 +4601,8 @@ static int intel_hdmi_reset_link(struct intel_encoder *encoder,
 
 	ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read TMDS config: %d\n", ret);
+		drm_err(&dev_priv->drm, "Failed to read TMDS config: %d\n",
+			ret);
 		return 0;
 	}
 
@@ -4302,15 +4626,17 @@ static int intel_hdmi_reset_link(struct intel_encoder *encoder,
 
 static enum intel_hotplug_state
 intel_ddi_hotplug(struct intel_encoder *encoder,
-		  struct intel_connector *connector,
-		  bool irq_received)
+		  struct intel_connector *connector)
 {
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+	enum phy phy = intel_port_to_phy(i915, encoder->port);
+	bool is_tc = intel_phy_is_tc(i915, phy);
 	struct drm_modeset_acquire_ctx ctx;
 	enum intel_hotplug_state state;
 	int ret;
 
-	state = intel_encoder_hotplug(encoder, connector, irq_received);
+	state = intel_encoder_hotplug(encoder, connector);
 
 	drm_modeset_acquire_init(&ctx, 0);
 
@@ -4348,8 +4674,15 @@ intel_ddi_hotplug(struct intel_encoder *encoder,
 	 * valid EDID. To solve this schedule another detection cycle if this
 	 * time around we didn't detect any change in the sink's connection
 	 * status.
+	 *
+	 * Type-c connectors which get their HPD signal deasserted then
+	 * reasserted, without unplugging/replugging the sink from the
+	 * connector, introduce a delay until the AUX channel communication
+	 * becomes functional. Retry the detection for 5 seconds on type-c
+	 * connectors to account for this delay.
 	 */
-	if (state == INTEL_HOTPLUG_UNCHANGED && irq_received &&
+	if (state == INTEL_HOTPLUG_UNCHANGED &&
+	    connector->hotplug_retries < (is_tc ? 5 : 1) &&
 	    !dig_port->dp.is_mst)
 		state = INTEL_HOTPLUG_RETRY;
 
@@ -4424,7 +4757,8 @@ intel_ddi_max_lanes(struct intel_digital_port *intel_dport)
 	 * so we use the proper lane count for our calculations.
 	 */
 	if (intel_ddi_a_force_4_lanes(intel_dport)) {
-		DRM_DEBUG_KMS("Forcing DDI_A_4_LANES for port A\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "Forcing DDI_A_4_LANES for port A\n");
 		intel_dport->saved_port_bits |= DDI_A_4_LANES;
 		max_lanes = 4;
 	}
@@ -4452,12 +4786,14 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 		init_dp = true;
 		init_lspcon = true;
 		init_hdmi = false;
-		DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port));
+		drm_dbg_kms(&dev_priv->drm, "VBT says port %c has lspcon\n",
+			    port_name(port));
 	}
 
 	if (!init_dp && !init_hdmi) {
-		DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n",
-			      port_name(port));
+		drm_dbg_kms(&dev_priv->drm,
+			    "VBT says port %c is not DVI/HDMI/DP compatible, respect it\n",
+			    port_name(port));
 		return;
 	}
 
@@ -4536,14 +4872,16 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	if (init_lspcon) {
 		if (lspcon_init(intel_dig_port))
 			/* TODO: handle hdmi info frame part */
-			DRM_DEBUG_KMS("LSPCON init success on port %c\n",
-				port_name(port));
+			drm_dbg_kms(&dev_priv->drm,
+				    "LSPCON init success on port %c\n",
+				    port_name(port));
 		else
 			/*
 			 * LSPCON init faied, but DP init was success, so
 			 * lets try to drive as DP++ port.
 			 */
-			DRM_ERROR("LSPCON init failed on port %c\n",
+			drm_err(&dev_priv->drm,
+				"LSPCON init failed on port %c\n",
 				port_name(port));
 	}
 
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.h b/drivers/gpu/drm/i915/display/intel_ddi.h
index 55fd72b901fe..fbdf8ddde486 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.h
+++ b/drivers/gpu/drm/i915/display/intel_ddi.h
@@ -17,16 +17,19 @@ struct intel_dp;
 struct intel_dpll_hw_state;
 struct intel_encoder;
 
-void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder,
+void intel_ddi_fdi_post_disable(struct intel_atomic_state *state,
+				struct intel_encoder *intel_encoder,
 				const struct intel_crtc_state *old_crtc_state,
 				const struct drm_connector_state *old_conn_state);
 void hsw_fdi_link_train(struct intel_encoder *encoder,
 			const struct intel_crtc_state *crtc_state);
 void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port);
 bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
-void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state);
+void intel_ddi_enable_transcoder_func(struct intel_encoder *encoder,
+				      const struct intel_crtc_state *crtc_state);
 void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state);
-void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state);
+void intel_ddi_enable_pipe_clock(struct intel_encoder *encoder,
+				 const struct intel_crtc_state *crtc_state);
 void intel_ddi_disable_pipe_clock(const  struct intel_crtc_state *crtc_state);
 void intel_ddi_set_dp_msa(const struct intel_crtc_state *crtc_state,
 			  const struct drm_connector_state *conn_state);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 346846609f45..2a17cf38d3dc 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -238,9 +238,9 @@ static void intel_update_czclk(struct drm_i915_private *dev_priv)
 		dev_priv->czclk_freq);
 }
 
-static inline u32 /* units of 100MHz */
-intel_fdi_link_freq(struct drm_i915_private *dev_priv,
-		    const struct intel_crtc_state *pipe_config)
+/* units of 100MHz */
+static u32 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
+			       const struct intel_crtc_state *pipe_config)
 {
 	if (HAS_DDI(dev_priv))
 		return pipe_config->port_clock; /* SPLL */
@@ -525,7 +525,7 @@ skl_wa_827(struct drm_i915_private *dev_priv, enum pipe pipe, bool enable)
 		               intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) & ~(DUPS1_GATING_DIS | DUPS2_GATING_DIS));
 }
 
-/* Wa_2006604312:icl */
+/* Wa_2006604312:icl,ehl */
 static void
 icl_wa_scalerclkgating(struct drm_i915_private *dev_priv, enum pipe pipe,
 		       bool enable)
@@ -544,17 +544,23 @@ needs_modeset(const struct intel_crtc_state *state)
 	return drm_atomic_crtc_needs_modeset(&state->uapi);
 }
 
-bool
-is_trans_port_sync_mode(const struct intel_crtc_state *crtc_state)
+static bool
+is_trans_port_sync_slave(const struct intel_crtc_state *crtc_state)
 {
-	return (crtc_state->master_transcoder != INVALID_TRANSCODER ||
-		crtc_state->sync_mode_slaves_mask);
+	return crtc_state->master_transcoder != INVALID_TRANSCODER;
 }
 
 static bool
-is_trans_port_sync_slave(const struct intel_crtc_state *crtc_state)
+is_trans_port_sync_master(const struct intel_crtc_state *crtc_state)
 {
-	return crtc_state->master_transcoder != INVALID_TRANSCODER;
+	return crtc_state->sync_mode_slaves_mask != 0;
+}
+
+bool
+is_trans_port_sync_mode(const struct intel_crtc_state *crtc_state)
+{
+	return is_trans_port_sync_master(crtc_state) ||
+		is_trans_port_sync_slave(crtc_state);
 }
 
 /*
@@ -620,45 +626,43 @@ int chv_calc_dpll_params(int refclk, struct dpll *clock)
 	return clock->dot / 5;
 }
 
-#define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
-
 /*
  * Returns whether the given set of divisors are valid for a given refclk with
  * the given connectors.
  */
-static bool intel_PLL_is_valid(struct drm_i915_private *dev_priv,
+static bool intel_pll_is_valid(struct drm_i915_private *dev_priv,
 			       const struct intel_limit *limit,
 			       const struct dpll *clock)
 {
-	if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
-		INTELPllInvalid("n out of range\n");
-	if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
-		INTELPllInvalid("p1 out of range\n");
-	if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
-		INTELPllInvalid("m2 out of range\n");
-	if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
-		INTELPllInvalid("m1 out of range\n");
+	if (clock->n < limit->n.min || limit->n.max < clock->n)
+		return false;
+	if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+		return false;
+	if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
+		return false;
+	if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
+		return false;
 
 	if (!IS_PINEVIEW(dev_priv) && !IS_VALLEYVIEW(dev_priv) &&
 	    !IS_CHERRYVIEW(dev_priv) && !IS_GEN9_LP(dev_priv))
 		if (clock->m1 <= clock->m2)
-			INTELPllInvalid("m1 <= m2\n");
+			return false;
 
 	if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
 	    !IS_GEN9_LP(dev_priv)) {
 		if (clock->p < limit->p.min || limit->p.max < clock->p)
-			INTELPllInvalid("p out of range\n");
+			return false;
 		if (clock->m < limit->m.min || limit->m.max < clock->m)
-			INTELPllInvalid("m out of range\n");
+			return false;
 	}
 
 	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
-		INTELPllInvalid("vco out of range\n");
+		return false;
 	/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
 	 * connector, etc., rather than just a single range.
 	 */
 	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
-		INTELPllInvalid("dot out of range\n");
+		return false;
 
 	return true;
 }
@@ -725,7 +729,7 @@ i9xx_find_best_dpll(const struct intel_limit *limit,
 					int this_err;
 
 					i9xx_calc_dpll_params(refclk, &clock);
-					if (!intel_PLL_is_valid(to_i915(dev),
+					if (!intel_pll_is_valid(to_i915(dev),
 								limit,
 								&clock))
 						continue;
@@ -781,7 +785,7 @@ pnv_find_best_dpll(const struct intel_limit *limit,
 					int this_err;
 
 					pnv_calc_dpll_params(refclk, &clock);
-					if (!intel_PLL_is_valid(to_i915(dev),
+					if (!intel_pll_is_valid(to_i915(dev),
 								limit,
 								&clock))
 						continue;
@@ -842,7 +846,7 @@ g4x_find_best_dpll(const struct intel_limit *limit,
 					int this_err;
 
 					i9xx_calc_dpll_params(refclk, &clock);
-					if (!intel_PLL_is_valid(to_i915(dev),
+					if (!intel_pll_is_valid(to_i915(dev),
 								limit,
 								&clock))
 						continue;
@@ -939,7 +943,7 @@ vlv_find_best_dpll(const struct intel_limit *limit,
 
 					vlv_calc_dpll_params(refclk, &clock);
 
-					if (!intel_PLL_is_valid(to_i915(dev),
+					if (!intel_pll_is_valid(to_i915(dev),
 								limit,
 								&clock))
 						continue;
@@ -1008,7 +1012,7 @@ chv_find_best_dpll(const struct intel_limit *limit,
 
 			chv_calc_dpll_params(refclk, &clock);
 
-			if (!intel_PLL_is_valid(to_i915(dev), limit, &clock))
+			if (!intel_pll_is_valid(to_i915(dev), limit, &clock))
 				continue;
 
 			if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
@@ -1969,16 +1973,16 @@ static bool is_aux_plane(const struct drm_framebuffer *fb, int plane)
 
 static int main_to_ccs_plane(const struct drm_framebuffer *fb, int main_plane)
 {
-	WARN_ON(!is_ccs_modifier(fb->modifier) ||
-		(main_plane && main_plane >= fb->format->num_planes / 2));
+	drm_WARN_ON(fb->dev, !is_ccs_modifier(fb->modifier) ||
+		    (main_plane && main_plane >= fb->format->num_planes / 2));
 
 	return fb->format->num_planes / 2 + main_plane;
 }
 
 static int ccs_to_main_plane(const struct drm_framebuffer *fb, int ccs_plane)
 {
-	WARN_ON(!is_ccs_modifier(fb->modifier) ||
-		ccs_plane < fb->format->num_planes / 2);
+	drm_WARN_ON(fb->dev, !is_ccs_modifier(fb->modifier) ||
+		    ccs_plane < fb->format->num_planes / 2);
 
 	return ccs_plane - fb->format->num_planes / 2;
 }
@@ -2910,6 +2914,7 @@ intel_fb_plane_get_subsampling(int *hsub, int *vsub,
 static int
 intel_fb_check_ccs_xy(struct drm_framebuffer *fb, int ccs_plane, int x, int y)
 {
+	struct drm_i915_private *i915 = to_i915(fb->dev);
 	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
 	int main_plane;
 	int hsub, vsub;
@@ -2938,7 +2943,8 @@ intel_fb_check_ccs_xy(struct drm_framebuffer *fb, int ccs_plane, int x, int y)
 	 * x/y offsets must match between CCS and the main surface.
 	 */
 	if (main_x != ccs_x || main_y != ccs_y) {
-		DRM_DEBUG_KMS("Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n",
+		drm_dbg_kms(&i915->drm,
+			      "Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n",
 			      main_x, main_y,
 			      ccs_x, ccs_y,
 			      intel_fb->normal[main_plane].x,
@@ -2986,7 +2992,7 @@ setup_fb_rotation(int plane, const struct intel_remapped_plane_info *plane_info,
 	    fb->modifier != I915_FORMAT_MOD_Yf_TILED)
 		return 0;
 
-	if (WARN_ON(plane >= ARRAY_SIZE(rot_info->plane)))
+	if (drm_WARN_ON(fb->dev, plane >= ARRAY_SIZE(rot_info->plane)))
 		return 0;
 
 	rot_info->plane[plane] = *plane_info;
@@ -3336,6 +3342,8 @@ int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
 		return DRM_FORMAT_RGB565;
 	case PLANE_CTL_FORMAT_NV12:
 		return DRM_FORMAT_NV12;
+	case PLANE_CTL_FORMAT_XYUV:
+		return DRM_FORMAT_XYUV8888;
 	case PLANE_CTL_FORMAT_P010:
 		return DRM_FORMAT_P010;
 	case PLANE_CTL_FORMAT_P012:
@@ -4580,6 +4588,8 @@ static u32 skl_plane_ctl_format(u32 pixel_format)
 	case DRM_FORMAT_XRGB16161616F:
 	case DRM_FORMAT_ARGB16161616F:
 		return PLANE_CTL_FORMAT_XRGB_16161616F;
+	case DRM_FORMAT_XYUV8888:
+		return PLANE_CTL_FORMAT_XYUV;
 	case DRM_FORMAT_YUYV:
 		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
 	case DRM_FORMAT_YVYU:
@@ -4998,37 +5008,6 @@ static void icl_set_pipe_chicken(struct intel_crtc *crtc)
 	intel_de_write(dev_priv, PIPE_CHICKEN(pipe), tmp);
 }
 
-static void icl_enable_trans_port_sync(const struct intel_crtc_state *crtc_state)
-{
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	u32 trans_ddi_func_ctl2_val;
-	u8 master_select;
-
-	/*
-	 * Configure the master select and enable Transcoder Port Sync for
-	 * Slave CRTCs transcoder.
-	 */
-	if (crtc_state->master_transcoder == INVALID_TRANSCODER)
-		return;
-
-	if (crtc_state->master_transcoder == TRANSCODER_EDP)
-		master_select = 0;
-	else
-		master_select = crtc_state->master_transcoder + 1;
-
-	/* Set the master select bits for Tranascoder Port Sync */
-	trans_ddi_func_ctl2_val = (PORT_SYNC_MODE_MASTER_SELECT(master_select) &
-				   PORT_SYNC_MODE_MASTER_SELECT_MASK) <<
-		PORT_SYNC_MODE_MASTER_SELECT_SHIFT;
-	/* Enable Transcoder Port Sync */
-	trans_ddi_func_ctl2_val |= PORT_SYNC_MODE_ENABLE;
-
-	intel_de_write(dev_priv,
-		       TRANS_DDI_FUNC_CTL2(crtc_state->cpu_transcoder),
-		       trans_ddi_func_ctl2_val);
-}
-
 static void intel_fdi_normal_train(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
@@ -6110,30 +6089,26 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
 	return 0;
 }
 
-/**
- * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
- *
- * @state: crtc's scaler state
- *
- * Return
- *     0 - scaler_usage updated successfully
- *    error - requested scaling cannot be supported or other error condition
- */
-int skl_update_scaler_crtc(struct intel_crtc_state *state)
+static int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state)
 {
-	const struct drm_display_mode *adjusted_mode = &state->hw.adjusted_mode;
-	bool need_scaler = false;
+	const struct drm_display_mode *adjusted_mode =
+		&crtc_state->hw.adjusted_mode;
+	int width, height;
 
-	if (state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
-	    state->pch_pfit.enabled)
-		need_scaler = true;
+	if (crtc_state->pch_pfit.enabled) {
+		width = drm_rect_width(&crtc_state->pch_pfit.dst);
+		height = drm_rect_height(&crtc_state->pch_pfit.dst);
+	} else {
+		width = adjusted_mode->crtc_hdisplay;
+		height = adjusted_mode->crtc_vdisplay;
+	}
 
-	return skl_update_scaler(state, !state->hw.active, SKL_CRTC_INDEX,
-				 &state->scaler_state.scaler_id,
-				 state->pipe_src_w, state->pipe_src_h,
-				 adjusted_mode->crtc_hdisplay,
-				 adjusted_mode->crtc_vdisplay, NULL, 0,
-				 need_scaler);
+	return skl_update_scaler(crtc_state, !crtc_state->hw.active,
+				 SKL_CRTC_INDEX,
+				 &crtc_state->scaler_state.scaler_id,
+				 crtc_state->pipe_src_w, crtc_state->pipe_src_h,
+				 width, height, NULL, 0,
+				 crtc_state->pch_pfit.enabled);
 }
 
 /**
@@ -6200,6 +6175,7 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
 	case DRM_FORMAT_UYVY:
 	case DRM_FORMAT_VYUY:
 	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_XYUV8888:
 	case DRM_FORMAT_P010:
 	case DRM_FORMAT_P012:
 	case DRM_FORMAT_P016:
@@ -6241,70 +6217,80 @@ static void skl_pfit_enable(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	enum pipe pipe = crtc->pipe;
 	const struct intel_crtc_scaler_state *scaler_state =
 		&crtc_state->scaler_state;
+	struct drm_rect src = {
+		.x2 = crtc_state->pipe_src_w << 16,
+		.y2 = crtc_state->pipe_src_h << 16,
+	};
+	const struct drm_rect *dst = &crtc_state->pch_pfit.dst;
+	u16 uv_rgb_hphase, uv_rgb_vphase;
+	enum pipe pipe = crtc->pipe;
+	int width = drm_rect_width(dst);
+	int height = drm_rect_height(dst);
+	int x = dst->x1;
+	int y = dst->y1;
+	int hscale, vscale;
+	unsigned long irqflags;
+	int id;
 
-	if (crtc_state->pch_pfit.enabled) {
-		u16 uv_rgb_hphase, uv_rgb_vphase;
-		int pfit_w, pfit_h, hscale, vscale;
-		unsigned long irqflags;
-		int id;
-
-		if (drm_WARN_ON(&dev_priv->drm,
-				crtc_state->scaler_state.scaler_id < 0))
-			return;
+	if (!crtc_state->pch_pfit.enabled)
+		return;
 
-		pfit_w = (crtc_state->pch_pfit.size >> 16) & 0xFFFF;
-		pfit_h = crtc_state->pch_pfit.size & 0xFFFF;
+	if (drm_WARN_ON(&dev_priv->drm,
+			crtc_state->scaler_state.scaler_id < 0))
+		return;
 
-		hscale = (crtc_state->pipe_src_w << 16) / pfit_w;
-		vscale = (crtc_state->pipe_src_h << 16) / pfit_h;
+	hscale = drm_rect_calc_hscale(&src, dst, 0, INT_MAX);
+	vscale = drm_rect_calc_vscale(&src, dst, 0, INT_MAX);
 
-		uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
-		uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);
+	uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
+	uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);
 
-		id = scaler_state->scaler_id;
+	id = scaler_state->scaler_id;
 
-		spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
+	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
 
-		intel_de_write_fw(dev_priv, SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
-				  PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
-		intel_de_write_fw(dev_priv, SKL_PS_VPHASE(pipe, id),
-				  PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_vphase));
-		intel_de_write_fw(dev_priv, SKL_PS_HPHASE(pipe, id),
-				  PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_hphase));
-		intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(pipe, id),
-				  crtc_state->pch_pfit.pos);
-		intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(pipe, id),
-				  crtc_state->pch_pfit.size);
+	intel_de_write_fw(dev_priv, SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
+			  PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
+	intel_de_write_fw(dev_priv, SKL_PS_VPHASE(pipe, id),
+			  PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_vphase));
+	intel_de_write_fw(dev_priv, SKL_PS_HPHASE(pipe, id),
+			  PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_hphase));
+	intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(pipe, id),
+			  x << 16 | y);
+	intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(pipe, id),
+			  width << 16 | height);
 
-		spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
-	}
+	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
 }
 
 static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	const struct drm_rect *dst = &crtc_state->pch_pfit.dst;
 	enum pipe pipe = crtc->pipe;
+	int width = drm_rect_width(dst);
+	int height = drm_rect_height(dst);
+	int x = dst->x1;
+	int y = dst->y1;
 
-	if (crtc_state->pch_pfit.enabled) {
-		/* Force use of hard-coded filter coefficients
-		 * as some pre-programmed values are broken,
-		 * e.g. x201.
-		 */
-		if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv))
-			intel_de_write(dev_priv, PF_CTL(pipe),
-				       PF_ENABLE | PF_FILTER_MED_3x3 | PF_PIPE_SEL_IVB(pipe));
-		else
-			intel_de_write(dev_priv, PF_CTL(pipe),
-				       PF_ENABLE | PF_FILTER_MED_3x3);
-		intel_de_write(dev_priv, PF_WIN_POS(pipe),
-			       crtc_state->pch_pfit.pos);
-		intel_de_write(dev_priv, PF_WIN_SZ(pipe),
-			       crtc_state->pch_pfit.size);
-	}
+	if (!crtc_state->pch_pfit.enabled)
+		return;
+
+	/* Force use of hard-coded filter coefficients
+	 * as some pre-programmed values are broken,
+	 * e.g. x201.
+	 */
+	if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv))
+		intel_de_write(dev_priv, PF_CTL(pipe), PF_ENABLE |
+			       PF_FILTER_MED_3x3 | PF_PIPE_SEL_IVB(pipe));
+	else
+		intel_de_write(dev_priv, PF_CTL(pipe), PF_ENABLE |
+			       PF_FILTER_MED_3x3);
+	intel_de_write(dev_priv, PF_WIN_POS(pipe), x << 16 | y);
+	intel_de_write(dev_priv, PF_WIN_SZ(pipe), width << 16 | height);
 }
 
 void hsw_enable_ips(const struct intel_crtc_state *crtc_state)
@@ -6463,8 +6449,8 @@ static bool needs_scalerclk_wa(const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
 
-	/* Wa_2006604312:icl */
-	if (crtc_state->scaler_state.scaler_users > 0 && IS_ICELAKE(dev_priv))
+	/* Wa_2006604312:icl,ehl */
+	if (crtc_state->scaler_state.scaler_users > 0 && IS_GEN(dev_priv, 11))
 		return true;
 
 	return false;
@@ -6534,7 +6520,7 @@ static void intel_pre_plane_update(struct intel_atomic_state *state,
 	    needs_nv12_wa(new_crtc_state))
 		skl_wa_827(dev_priv, pipe, true);
 
-	/* Wa_2006604312:icl */
+	/* Wa_2006604312:icl,ehl */
 	if (!needs_scalerclk_wa(old_crtc_state) &&
 	    needs_scalerclk_wa(new_crtc_state))
 		icl_wa_scalerclkgating(dev_priv, pipe, true);
@@ -6646,7 +6632,7 @@ intel_connector_primary_encoder(struct intel_connector *connector)
 		return &dp_to_dig_port(connector->mst_port)->base;
 
 	encoder = intel_attached_encoder(connector);
-	WARN_ON(!encoder);
+	drm_WARN_ON(connector->base.dev, !encoder);
 
 	return encoder;
 }
@@ -6720,7 +6706,8 @@ static void intel_encoders_pre_pll_enable(struct intel_atomic_state *state,
 			continue;
 
 		if (encoder->pre_pll_enable)
-			encoder->pre_pll_enable(encoder, crtc_state, conn_state);
+			encoder->pre_pll_enable(state, encoder,
+						crtc_state, conn_state);
 	}
 }
 
@@ -6741,7 +6728,8 @@ static void intel_encoders_pre_enable(struct intel_atomic_state *state,
 			continue;
 
 		if (encoder->pre_enable)
-			encoder->pre_enable(encoder, crtc_state, conn_state);
+			encoder->pre_enable(state, encoder,
+					    crtc_state, conn_state);
 	}
 }
 
@@ -6762,7 +6750,8 @@ static void intel_encoders_enable(struct intel_atomic_state *state,
 			continue;
 
 		if (encoder->enable)
-			encoder->enable(encoder, crtc_state, conn_state);
+			encoder->enable(state, encoder,
+					crtc_state, conn_state);
 		intel_opregion_notify_encoder(encoder, true);
 	}
 }
@@ -6785,7 +6774,8 @@ static void intel_encoders_disable(struct intel_atomic_state *state,
 
 		intel_opregion_notify_encoder(encoder, false);
 		if (encoder->disable)
-			encoder->disable(encoder, old_crtc_state, old_conn_state);
+			encoder->disable(state, encoder,
+					 old_crtc_state, old_conn_state);
 	}
 }
 
@@ -6806,7 +6796,8 @@ static void intel_encoders_post_disable(struct intel_atomic_state *state,
 			continue;
 
 		if (encoder->post_disable)
-			encoder->post_disable(encoder, old_crtc_state, old_conn_state);
+			encoder->post_disable(state, encoder,
+					      old_crtc_state, old_conn_state);
 	}
 }
 
@@ -6827,7 +6818,8 @@ static void intel_encoders_post_pll_disable(struct intel_atomic_state *state,
 			continue;
 
 		if (encoder->post_pll_disable)
-			encoder->post_pll_disable(encoder, old_crtc_state, old_conn_state);
+			encoder->post_pll_disable(state, encoder,
+						  old_crtc_state, old_conn_state);
 	}
 }
 
@@ -6848,7 +6840,8 @@ static void intel_encoders_update_pipe(struct intel_atomic_state *state,
 			continue;
 
 		if (encoder->update_pipe)
-			encoder->update_pipe(encoder, crtc_state, conn_state);
+			encoder->update_pipe(state, encoder,
+					     crtc_state, conn_state);
 	}
 }
 
@@ -7037,9 +7030,6 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
 	if (!transcoder_is_dsi(cpu_transcoder))
 		intel_set_pipe_timings(new_crtc_state);
 
-	if (INTEL_GEN(dev_priv) >= 11)
-		icl_enable_trans_port_sync(new_crtc_state);
-
 	intel_set_pipe_src_size(new_crtc_state);
 
 	if (cpu_transcoder != TRANSCODER_EDP &&
@@ -7087,9 +7077,6 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
 	if (INTEL_GEN(dev_priv) >= 11)
 		icl_set_pipe_chicken(crtc);
 
-	if (!transcoder_is_dsi(cpu_transcoder))
-		intel_ddi_enable_transcoder_func(new_crtc_state);
-
 	if (dev_priv->display.initial_watermarks)
 		dev_priv->display.initial_watermarks(state, crtc);
 
@@ -7120,11 +7107,12 @@ void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state)
 
 	/* To avoid upsetting the power well on haswell only disable the pfit if
 	 * it's in use. The hw state code will make sure we get this right. */
-	if (old_crtc_state->pch_pfit.enabled) {
-		intel_de_write(dev_priv, PF_CTL(pipe), 0);
-		intel_de_write(dev_priv, PF_WIN_POS(pipe), 0);
-		intel_de_write(dev_priv, PF_WIN_SZ(pipe), 0);
-	}
+	if (!old_crtc_state->pch_pfit.enabled)
+		return;
+
+	intel_de_write(dev_priv, PF_CTL(pipe), 0);
+	intel_de_write(dev_priv, PF_WIN_POS(pipe), 0);
+	intel_de_write(dev_priv, PF_WIN_SZ(pipe), 0);
 }
 
 static void ilk_crtc_disable(struct intel_atomic_state *state,
@@ -7312,7 +7300,17 @@ intel_aux_power_domain(struct intel_digital_port *dig_port)
 		}
 	}
 
-	switch (dig_port->aux_ch) {
+	return intel_legacy_aux_to_power_domain(dig_port->aux_ch);
+}
+
+/*
+ * Converts aux_ch to power_domain without caring about TBT ports for that use
+ * intel_aux_power_domain()
+ */
+enum intel_display_power_domain
+intel_legacy_aux_to_power_domain(enum aux_ch aux_ch)
+{
+	switch (aux_ch) {
 	case AUX_CH_A:
 		return POWER_DOMAIN_AUX_A;
 	case AUX_CH_B:
@@ -7328,7 +7326,7 @@ intel_aux_power_domain(struct intel_digital_port *dig_port)
 	case AUX_CH_G:
 		return POWER_DOMAIN_AUX_G;
 	default:
-		MISSING_CASE(dig_port->aux_ch);
+		MISSING_CASE(aux_ch);
 		return POWER_DOMAIN_AUX_A;
 	}
 }
@@ -7942,39 +7940,36 @@ static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
 		(crtc->pipe == PIPE_A || IS_I915G(dev_priv));
 }
 
-static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config)
+static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *crtc_state)
 {
-	u32 pixel_rate;
-
-	pixel_rate = pipe_config->hw.adjusted_mode.crtc_clock;
+	u32 pixel_rate = crtc_state->hw.adjusted_mode.crtc_clock;
+	unsigned int pipe_w, pipe_h, pfit_w, pfit_h;
 
 	/*
 	 * We only use IF-ID interlacing. If we ever use
 	 * PF-ID we'll need to adjust the pixel_rate here.
 	 */
 
-	if (pipe_config->pch_pfit.enabled) {
-		u64 pipe_w, pipe_h, pfit_w, pfit_h;
-		u32 pfit_size = pipe_config->pch_pfit.size;
+	if (!crtc_state->pch_pfit.enabled)
+		return pixel_rate;
 
-		pipe_w = pipe_config->pipe_src_w;
-		pipe_h = pipe_config->pipe_src_h;
+	pipe_w = crtc_state->pipe_src_w;
+	pipe_h = crtc_state->pipe_src_h;
 
-		pfit_w = (pfit_size >> 16) & 0xFFFF;
-		pfit_h = pfit_size & 0xFFFF;
-		if (pipe_w < pfit_w)
-			pipe_w = pfit_w;
-		if (pipe_h < pfit_h)
-			pipe_h = pfit_h;
+	pfit_w = drm_rect_width(&crtc_state->pch_pfit.dst);
+	pfit_h = drm_rect_height(&crtc_state->pch_pfit.dst);
 
-		if (WARN_ON(!pfit_w || !pfit_h))
-			return pixel_rate;
+	if (pipe_w < pfit_w)
+		pipe_w = pfit_w;
+	if (pipe_h < pfit_h)
+		pipe_h = pfit_h;
 
-		pixel_rate = div_u64(mul_u32_u32(pixel_rate, pipe_w * pipe_h),
-				     pfit_w * pfit_h);
-	}
+	if (drm_WARN_ON(crtc_state->uapi.crtc->dev,
+			!pfit_w || !pfit_h))
+		return pixel_rate;
 
-	return pixel_rate;
+	return div_u64(mul_u32_u32(pixel_rate, pipe_w * pipe_h),
+		       pfit_w * pfit_h);
 }
 
 static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
@@ -8143,7 +8138,7 @@ static void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv)
 	}
 }
 
-static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
+static bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 {
 	if (i915_modparams.panel_use_ssc >= 0)
 		return i915_modparams.panel_use_ssc != 0;
@@ -8891,7 +8886,6 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
 
 	mode->clock = pipe_config->hw.adjusted_mode.crtc_clock;
 
-	mode->hsync = drm_mode_hsync(mode);
 	mode->vrefresh = drm_mode_vrefresh(mode);
 	drm_mode_set_name(mode);
 }
@@ -9168,9 +9162,9 @@ static bool i9xx_has_pfit(struct drm_i915_private *dev_priv)
 		IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv);
 }
 
-static void i9xx_get_pfit_config(struct intel_crtc *crtc,
-				 struct intel_crtc_state *pipe_config)
+static void i9xx_get_pfit_config(struct intel_crtc_state *crtc_state)
 {
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	u32 tmp;
 
@@ -9190,9 +9184,9 @@ static void i9xx_get_pfit_config(struct intel_crtc *crtc,
 			return;
 	}
 
-	pipe_config->gmch_pfit.control = tmp;
-	pipe_config->gmch_pfit.pgm_ratios = intel_de_read(dev_priv,
-							  PFIT_PGM_RATIOS);
+	crtc_state->gmch_pfit.control = tmp;
+	crtc_state->gmch_pfit.pgm_ratios =
+		intel_de_read(dev_priv, PFIT_PGM_RATIOS);
 }
 
 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
@@ -9398,7 +9392,6 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
 	pipe_config->shared_dpll = NULL;
-	pipe_config->master_transcoder = INVALID_TRANSCODER;
 
 	ret = false;
 
@@ -9443,7 +9436,7 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 	intel_get_pipe_timings(crtc, pipe_config);
 	intel_get_pipe_src_size(crtc, pipe_config);
 
-	i9xx_get_pfit_config(crtc, pipe_config);
+	i9xx_get_pfit_config(pipe_config);
 
 	if (INTEL_GEN(dev_priv) >= 4) {
 		/* No way to read it out on pipes B and C */
@@ -10413,37 +10406,47 @@ static void ilk_get_fdi_m_n_config(struct intel_crtc *crtc,
 				     &pipe_config->fdi_m_n, NULL);
 }
 
-static void skl_get_pfit_config(struct intel_crtc *crtc,
-				struct intel_crtc_state *pipe_config)
+static void ilk_get_pfit_pos_size(struct intel_crtc_state *crtc_state,
+				  u32 pos, u32 size)
 {
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
-	u32 ps_ctrl = 0;
+	drm_rect_init(&crtc_state->pch_pfit.dst,
+		      pos >> 16, pos & 0xffff,
+		      size >> 16, size & 0xffff);
+}
+
+static void skl_get_pfit_config(struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
 	int id = -1;
 	int i;
 
 	/* find scaler attached to this pipe */
 	for (i = 0; i < crtc->num_scalers; i++) {
-		ps_ctrl = intel_de_read(dev_priv, SKL_PS_CTRL(crtc->pipe, i));
-		if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
-			id = i;
-			pipe_config->pch_pfit.enabled = true;
-			pipe_config->pch_pfit.pos = intel_de_read(dev_priv,
-								  SKL_PS_WIN_POS(crtc->pipe, i));
-			pipe_config->pch_pfit.size = intel_de_read(dev_priv,
-								   SKL_PS_WIN_SZ(crtc->pipe, i));
-			scaler_state->scalers[i].in_use = true;
-			break;
-		}
+		u32 ctl, pos, size;
+
+		ctl = intel_de_read(dev_priv, SKL_PS_CTRL(crtc->pipe, i));
+		if ((ctl & (PS_SCALER_EN | PS_PLANE_SEL_MASK)) != PS_SCALER_EN)
+			continue;
+
+		id = i;
+		crtc_state->pch_pfit.enabled = true;
+
+		pos = intel_de_read(dev_priv, SKL_PS_WIN_POS(crtc->pipe, i));
+		size = intel_de_read(dev_priv, SKL_PS_WIN_SZ(crtc->pipe, i));
+
+		ilk_get_pfit_pos_size(crtc_state, pos, size);
+
+		scaler_state->scalers[i].in_use = true;
+		break;
 	}
 
 	scaler_state->scaler_id = id;
-	if (id >= 0) {
+	if (id >= 0)
 		scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
-	} else {
+	else
 		scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
-	}
 }
 
 static void
@@ -10579,30 +10582,30 @@ skl_get_initial_plane_config(struct intel_crtc *crtc,
 	kfree(intel_fb);
 }
 
-static void ilk_get_pfit_config(struct intel_crtc *crtc,
-				struct intel_crtc_state *pipe_config)
+static void ilk_get_pfit_config(struct intel_crtc_state *crtc_state)
 {
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	u32 tmp;
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	u32 ctl, pos, size;
 
-	tmp = intel_de_read(dev_priv, PF_CTL(crtc->pipe));
-
-	if (tmp & PF_ENABLE) {
-		pipe_config->pch_pfit.enabled = true;
-		pipe_config->pch_pfit.pos = intel_de_read(dev_priv,
-							  PF_WIN_POS(crtc->pipe));
-		pipe_config->pch_pfit.size = intel_de_read(dev_priv,
-							   PF_WIN_SZ(crtc->pipe));
-
-		/* We currently do not free assignements of panel fitters on
-		 * ivb/hsw (since we don't use the higher upscaling modes which
-		 * differentiates them) so just WARN about this case for now. */
-		if (IS_GEN(dev_priv, 7)) {
-			drm_WARN_ON(dev, (tmp & PF_PIPE_SEL_MASK_IVB) !=
-				    PF_PIPE_SEL_IVB(crtc->pipe));
-		}
-	}
+	ctl = intel_de_read(dev_priv, PF_CTL(crtc->pipe));
+	if ((ctl & PF_ENABLE) == 0)
+		return;
+
+	crtc_state->pch_pfit.enabled = true;
+
+	pos = intel_de_read(dev_priv, PF_WIN_POS(crtc->pipe));
+	size = intel_de_read(dev_priv, PF_WIN_SZ(crtc->pipe));
+
+	ilk_get_pfit_pos_size(crtc_state, pos, size);
+
+	/*
+	 * We currently do not free assignements of panel fitters on
+	 * ivb/hsw (since we don't use the higher upscaling modes which
+	 * differentiates them) so just WARN about this case for now.
+	 */
+	drm_WARN_ON(&dev_priv->drm, IS_GEN(dev_priv, 7) &&
+		    (ctl & PF_PIPE_SEL_MASK_IVB) != PF_PIPE_SEL_IVB(crtc->pipe));
 }
 
 static bool ilk_get_pipe_config(struct intel_crtc *crtc,
@@ -10622,7 +10625,6 @@ static bool ilk_get_pipe_config(struct intel_crtc *crtc,
 
 	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
 	pipe_config->shared_dpll = NULL;
-	pipe_config->master_transcoder = INVALID_TRANSCODER;
 
 	ret = false;
 	tmp = intel_de_read(dev_priv, PIPECONF(crtc->pipe));
@@ -10714,7 +10716,7 @@ static bool ilk_get_pipe_config(struct intel_crtc *crtc,
 	intel_get_pipe_timings(crtc, pipe_config);
 	intel_get_pipe_src_size(crtc, pipe_config);
 
-	ilk_get_pfit_config(crtc, pipe_config);
+	ilk_get_pfit_config(pipe_config);
 
 	ret = true;
 
@@ -10891,7 +10893,7 @@ static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
 		panel_transcoder_mask |=
 			BIT(TRANSCODER_DSI_0) | BIT(TRANSCODER_DSI_1);
 
-	if (HAS_TRANSCODER_EDP(dev_priv))
+	if (HAS_TRANSCODER(dev_priv, TRANSCODER_EDP))
 		panel_transcoder_mask |= BIT(TRANSCODER_EDP);
 
 	/*
@@ -11085,61 +11087,6 @@ static void hsw_get_ddi_port_state(struct intel_crtc *crtc,
 	}
 }
 
-static enum transcoder transcoder_master_readout(struct drm_i915_private *dev_priv,
-						 enum transcoder cpu_transcoder)
-{
-	u32 trans_port_sync, master_select;
-
-	trans_port_sync = intel_de_read(dev_priv,
-				        TRANS_DDI_FUNC_CTL2(cpu_transcoder));
-
-	if ((trans_port_sync & PORT_SYNC_MODE_ENABLE) == 0)
-		return INVALID_TRANSCODER;
-
-	master_select = trans_port_sync &
-			PORT_SYNC_MODE_MASTER_SELECT_MASK;
-	if (master_select == 0)
-		return TRANSCODER_EDP;
-	else
-		return master_select - 1;
-}
-
-static void icl_get_trans_port_sync_config(struct intel_crtc_state *crtc_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
-	u32 transcoders;
-	enum transcoder cpu_transcoder;
-
-	crtc_state->master_transcoder = transcoder_master_readout(dev_priv,
-								  crtc_state->cpu_transcoder);
-
-	transcoders = BIT(TRANSCODER_A) |
-		BIT(TRANSCODER_B) |
-		BIT(TRANSCODER_C) |
-		BIT(TRANSCODER_D);
-	for_each_cpu_transcoder_masked(dev_priv, cpu_transcoder, transcoders) {
-		enum intel_display_power_domain power_domain;
-		intel_wakeref_t trans_wakeref;
-
-		power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
-		trans_wakeref = intel_display_power_get_if_enabled(dev_priv,
-								   power_domain);
-
-		if (!trans_wakeref)
-			continue;
-
-		if (transcoder_master_readout(dev_priv, cpu_transcoder) ==
-		    crtc_state->cpu_transcoder)
-			crtc_state->sync_mode_slaves_mask |= BIT(cpu_transcoder);
-
-		intel_display_power_put(dev_priv, power_domain, trans_wakeref);
-	}
-
-	drm_WARN_ON(&dev_priv->drm,
-		    crtc_state->master_transcoder != INVALID_TRANSCODER &&
-		    crtc_state->sync_mode_slaves_mask);
-}
-
 static bool hsw_get_pipe_config(struct intel_crtc *crtc,
 				struct intel_crtc_state *pipe_config)
 {
@@ -11243,9 +11190,9 @@ static bool hsw_get_pipe_config(struct intel_crtc *crtc,
 		power_domain_mask |= BIT_ULL(power_domain);
 
 		if (INTEL_GEN(dev_priv) >= 9)
-			skl_get_pfit_config(crtc, pipe_config);
+			skl_get_pfit_config(pipe_config);
 		else
-			ilk_get_pfit_config(crtc, pipe_config);
+			ilk_get_pfit_config(pipe_config);
 	}
 
 	if (hsw_crtc_supports_ips(crtc)) {
@@ -11271,10 +11218,6 @@ static bool hsw_get_pipe_config(struct intel_crtc *crtc,
 		pipe_config->pixel_multiplier = 1;
 	}
 
-	if (INTEL_GEN(dev_priv) >= 11 &&
-	    !transcoder_is_dsi(pipe_config->cpu_transcoder))
-		icl_get_trans_port_sync_config(pipe_config);
-
 out:
 	for_each_power_domain(power_domain, power_domain_mask)
 		intel_display_power_put(dev_priv,
@@ -12377,10 +12320,8 @@ int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_stat
 	 * only combine the results from all planes in the current place?
 	 */
 	if (!is_crtc_enabled) {
-		plane_state->uapi.visible = visible = false;
-		crtc_state->active_planes &= ~BIT(plane->id);
-		crtc_state->data_rate[plane->id] = 0;
-		crtc_state->min_cdclk[plane->id] = 0;
+		intel_plane_set_invisible(crtc_state, plane_state);
+		visible = false;
 	}
 
 	if (!was_visible && !visible)
@@ -12510,8 +12451,10 @@ static int icl_add_linked_planes(struct intel_atomic_state *state)
 		if (IS_ERR(linked_plane_state))
 			return PTR_ERR(linked_plane_state);
 
-		WARN_ON(linked_plane_state->planar_linked_plane != plane);
-		WARN_ON(linked_plane_state->planar_slave == plane_state->planar_slave);
+		drm_WARN_ON(state->base.dev,
+			    linked_plane_state->planar_linked_plane != plane);
+		drm_WARN_ON(state->base.dev,
+			    linked_plane_state->planar_slave == plane_state->planar_slave);
 	}
 
 	return 0;
@@ -12886,19 +12829,20 @@ compute_baseline_pipe_bpp(struct intel_crtc *crtc,
 	return 0;
 }
 
-static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
+static void intel_dump_crtc_timings(struct drm_i915_private *i915,
+				    const struct drm_display_mode *mode)
 {
-	DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
-		      "type: 0x%x flags: 0x%x\n",
-		      mode->crtc_clock,
-		      mode->crtc_hdisplay, mode->crtc_hsync_start,
-		      mode->crtc_hsync_end, mode->crtc_htotal,
-		      mode->crtc_vdisplay, mode->crtc_vsync_start,
-		      mode->crtc_vsync_end, mode->crtc_vtotal,
-		      mode->type, mode->flags);
+	drm_dbg_kms(&i915->drm, "crtc timings: %d %d %d %d %d %d %d %d %d, "
+		    "type: 0x%x flags: 0x%x\n",
+		    mode->crtc_clock,
+		    mode->crtc_hdisplay, mode->crtc_hsync_start,
+		    mode->crtc_hsync_end, mode->crtc_htotal,
+		    mode->crtc_vdisplay, mode->crtc_vsync_start,
+		    mode->crtc_vsync_end, mode->crtc_vtotal,
+		    mode->type, mode->flags);
 }
 
-static inline void
+static void
 intel_dump_m_n_config(const struct intel_crtc_state *pipe_config,
 		      const char *id, unsigned int lane_count,
 		      const struct intel_link_m_n *m_n)
@@ -13042,6 +12986,11 @@ static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config,
 		    transcoder_name(pipe_config->cpu_transcoder),
 		    pipe_config->pipe_bpp, pipe_config->dither);
 
+	drm_dbg_kms(&dev_priv->drm,
+		    "port sync: master transcoder: %s, slave transcoder bitmask = 0x%x\n",
+		    transcoder_name(pipe_config->master_transcoder),
+		    pipe_config->sync_mode_slaves_mask);
+
 	if (pipe_config->has_pch_encoder)
 		intel_dump_m_n_config(pipe_config, "fdi",
 				      pipe_config->fdi_lanes,
@@ -13079,7 +13028,7 @@ static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config,
 	drm_mode_debug_printmodeline(&pipe_config->hw.mode);
 	drm_dbg_kms(&dev_priv->drm, "adjusted mode:\n");
 	drm_mode_debug_printmodeline(&pipe_config->hw.adjusted_mode);
-	intel_dump_crtc_timings(&pipe_config->hw.adjusted_mode);
+	intel_dump_crtc_timings(dev_priv, &pipe_config->hw.adjusted_mode);
 	drm_dbg_kms(&dev_priv->drm,
 		    "port clock: %d, pipe src size: %dx%d, pixel rate %d\n",
 		    pipe_config->port_clock,
@@ -13104,9 +13053,8 @@ static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config,
 			    pipe_config->gmch_pfit.lvds_border_bits);
 	else
 		drm_dbg_kms(&dev_priv->drm,
-			    "pch pfit: pos: 0x%08x, size: 0x%08x, %s, force thru: %s\n",
-			    pipe_config->pch_pfit.pos,
-			    pipe_config->pch_pfit.size,
+			    "pch pfit: " DRM_RECT_FMT ", %s, force thru: %s\n",
+			    DRM_RECT_ARG(&pipe_config->pch_pfit.dst),
 			    enableddisabled(pipe_config->pch_pfit.enabled),
 			    yesno(pipe_config->pch_pfit.force_thru));
 
@@ -13228,7 +13176,8 @@ static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state
 {
 	crtc_state->uapi.enable = crtc_state->hw.enable;
 	crtc_state->uapi.active = crtc_state->hw.active;
-	WARN_ON(drm_atomic_set_mode_for_crtc(&crtc_state->uapi, &crtc_state->hw.mode) < 0);
+	drm_WARN_ON(crtc_state->uapi.crtc->dev,
+		    drm_atomic_set_mode_for_crtc(&crtc_state->uapi, &crtc_state->hw.mode) < 0);
 
 	crtc_state->uapi.adjusted_mode = crtc_state->hw.adjusted_mode;
 
@@ -13847,8 +13796,10 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
 
 		PIPE_CONF_CHECK_BOOL(pch_pfit.enabled);
 		if (current_config->pch_pfit.enabled) {
-			PIPE_CONF_CHECK_X(pch_pfit.pos);
-			PIPE_CONF_CHECK_X(pch_pfit.size);
+			PIPE_CONF_CHECK_I(pch_pfit.dst.x1);
+			PIPE_CONF_CHECK_I(pch_pfit.dst.y1);
+			PIPE_CONF_CHECK_I(pch_pfit.dst.x2);
+			PIPE_CONF_CHECK_I(pch_pfit.dst.y2);
 		}
 
 		PIPE_CONF_CHECK_I(scaler_state.scaler_id);
@@ -14999,11 +14950,13 @@ static void intel_pipe_fastset(const struct intel_crtc_state *old_crtc_state,
 }
 
 static void commit_pipe_config(struct intel_atomic_state *state,
-			       struct intel_crtc_state *old_crtc_state,
-			       struct intel_crtc_state *new_crtc_state)
+			       struct intel_crtc *crtc)
 {
-	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	const struct intel_crtc_state *old_crtc_state =
+		intel_atomic_get_old_crtc_state(state, crtc);
+	const struct intel_crtc_state *new_crtc_state =
+		intel_atomic_get_new_crtc_state(state, crtc);
 	bool modeset = needs_modeset(new_crtc_state);
 
 	/*
@@ -15029,22 +14982,35 @@ static void commit_pipe_config(struct intel_atomic_state *state,
 		dev_priv->display.atomic_update_watermarks(state, crtc);
 }
 
-static void intel_update_crtc(struct intel_crtc *crtc,
-			      struct intel_atomic_state *state,
-			      struct intel_crtc_state *old_crtc_state,
-			      struct intel_crtc_state *new_crtc_state)
+static void intel_enable_crtc(struct intel_atomic_state *state,
+			      struct intel_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
-	bool modeset = needs_modeset(new_crtc_state);
+	const struct intel_crtc_state *new_crtc_state =
+		intel_atomic_get_new_crtc_state(state, crtc);
 
-	if (modeset) {
-		intel_crtc_update_active_timings(new_crtc_state);
+	if (!needs_modeset(new_crtc_state))
+		return;
 
-		dev_priv->display.crtc_enable(state, crtc);
+	intel_crtc_update_active_timings(new_crtc_state);
 
-		/* vblanks work again, re-enable pipe CRC. */
-		intel_crtc_enable_pipe_crc(crtc);
-	} else {
+	dev_priv->display.crtc_enable(state, crtc);
+
+	/* vblanks work again, re-enable pipe CRC. */
+	intel_crtc_enable_pipe_crc(crtc);
+}
+
+static void intel_update_crtc(struct intel_atomic_state *state,
+			      struct intel_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	const struct intel_crtc_state *old_crtc_state =
+		intel_atomic_get_old_crtc_state(state, crtc);
+	struct intel_crtc_state *new_crtc_state =
+		intel_atomic_get_new_crtc_state(state, crtc);
+	bool modeset = needs_modeset(new_crtc_state);
+
+	if (!modeset) {
 		if (new_crtc_state->preload_luts &&
 		    (new_crtc_state->uapi.color_mgmt_changed ||
 		     new_crtc_state->update_pipe))
@@ -15064,7 +15030,7 @@ static void intel_update_crtc(struct intel_crtc *crtc,
 	/* Perform vblank evasion around commit operation */
 	intel_pipe_update_start(new_crtc_state);
 
-	commit_pipe_config(state, old_crtc_state, new_crtc_state);
+	commit_pipe_config(state, crtc);
 
 	if (INTEL_GEN(dev_priv) >= 9)
 		skl_update_planes_on_crtc(state, crtc);
@@ -15084,18 +15050,6 @@ static void intel_update_crtc(struct intel_crtc *crtc,
 		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
 }
 
-static struct intel_crtc *intel_get_slave_crtc(const struct intel_crtc_state *new_crtc_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(new_crtc_state->uapi.crtc->dev);
-	enum transcoder slave_transcoder;
-
-	drm_WARN_ON(&dev_priv->drm,
-		    !is_power_of_2(new_crtc_state->sync_mode_slaves_mask));
-
-	slave_transcoder = ffs(new_crtc_state->sync_mode_slaves_mask) - 1;
-	return intel_get_crtc_for_pipe(dev_priv,
-				       (enum pipe)slave_transcoder);
-}
 
 static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
 					  struct intel_crtc_state *old_crtc_state,
@@ -15171,129 +15125,19 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
 
 static void intel_commit_modeset_enables(struct intel_atomic_state *state)
 {
+	struct intel_crtc_state *new_crtc_state;
 	struct intel_crtc *crtc;
-	struct intel_crtc_state *old_crtc_state, *new_crtc_state;
 	int i;
 
-	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
+	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
 		if (!new_crtc_state->hw.active)
 			continue;
 
-		intel_update_crtc(crtc, state, old_crtc_state,
-				  new_crtc_state);
+		intel_enable_crtc(state, crtc);
+		intel_update_crtc(state, crtc);
 	}
 }
 
-static void intel_crtc_enable_trans_port_sync(struct intel_crtc *crtc,
-					      struct intel_atomic_state *state,
-					      struct intel_crtc_state *new_crtc_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
-
-	intel_crtc_update_active_timings(new_crtc_state);
-	dev_priv->display.crtc_enable(state, crtc);
-	intel_crtc_enable_pipe_crc(crtc);
-}
-
-static void intel_set_dp_tp_ctl_normal(struct intel_crtc *crtc,
-				       struct intel_atomic_state *state)
-{
-	struct drm_connector *uninitialized_var(conn);
-	struct drm_connector_state *conn_state;
-	struct intel_dp *intel_dp;
-	int i;
-
-	for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
-		if (conn_state->crtc == &crtc->base)
-			break;
-	}
-	intel_dp = intel_attached_dp(to_intel_connector(conn));
-	intel_dp_stop_link_train(intel_dp);
-}
-
-/*
- * TODO: This is only called from port sync and it is identical to what will be
- * executed again in intel_update_crtc() over port sync pipes
- */
-static void intel_post_crtc_enable_updates(struct intel_crtc *crtc,
-					   struct intel_atomic_state *state)
-{
-	struct intel_crtc_state *new_crtc_state =
-		intel_atomic_get_new_crtc_state(state, crtc);
-	struct intel_crtc_state *old_crtc_state =
-		intel_atomic_get_old_crtc_state(state, crtc);
-	bool modeset = needs_modeset(new_crtc_state);
-
-	if (new_crtc_state->update_pipe && !new_crtc_state->enable_fbc)
-		intel_fbc_disable(crtc);
-	else
-		intel_fbc_enable(state, crtc);
-
-	/* Perform vblank evasion around commit operation */
-	intel_pipe_update_start(new_crtc_state);
-	commit_pipe_config(state, old_crtc_state, new_crtc_state);
-	skl_update_planes_on_crtc(state, crtc);
-	intel_pipe_update_end(new_crtc_state);
-
-	/*
-	 * We usually enable FIFO underrun interrupts as part of the
-	 * CRTC enable sequence during modesets.  But when we inherit a
-	 * valid pipe configuration from the BIOS we need to take care
-	 * of enabling them on the CRTC's first fastset.
-	 */
-	if (new_crtc_state->update_pipe && !modeset &&
-	    old_crtc_state->hw.mode.private_flags & I915_MODE_FLAG_INHERITED)
-		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
-}
-
-static void intel_update_trans_port_sync_crtcs(struct intel_crtc *crtc,
-					       struct intel_atomic_state *state,
-					       struct intel_crtc_state *old_crtc_state,
-					       struct intel_crtc_state *new_crtc_state)
-{
-	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
-	struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
-	struct intel_crtc_state *new_slave_crtc_state =
-		intel_atomic_get_new_crtc_state(state, slave_crtc);
-	struct intel_crtc_state *old_slave_crtc_state =
-		intel_atomic_get_old_crtc_state(state, slave_crtc);
-
-	drm_WARN_ON(&i915->drm, !slave_crtc || !new_slave_crtc_state ||
-		    !old_slave_crtc_state);
-
-	drm_dbg_kms(&i915->drm,
-		    "Updating Transcoder Port Sync Master CRTC = %d %s and Slave CRTC %d %s\n",
-		    crtc->base.base.id, crtc->base.name,
-		    slave_crtc->base.base.id, slave_crtc->base.name);
-
-	/* Enable seq for slave with with DP_TP_CTL left Idle until the
-	 * master is ready
-	 */
-	intel_crtc_enable_trans_port_sync(slave_crtc,
-					  state,
-					  new_slave_crtc_state);
-
-	/* Enable seq for master with with DP_TP_CTL left Idle */
-	intel_crtc_enable_trans_port_sync(crtc,
-					  state,
-					  new_crtc_state);
-
-	/* Set Slave's DP_TP_CTL to Normal */
-	intel_set_dp_tp_ctl_normal(slave_crtc,
-				   state);
-
-	/* Set Master's DP_TP_CTL To Normal */
-	usleep_range(200, 400);
-	intel_set_dp_tp_ctl_normal(crtc,
-				   state);
-
-	/* Now do the post crtc enable for all master and slaves */
-	intel_post_crtc_enable_updates(slave_crtc,
-				       state);
-	intel_post_crtc_enable_updates(crtc,
-				       state);
-}
-
 static void icl_dbuf_slice_pre_update(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
@@ -15365,8 +15209,7 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
 			entries[pipe] = new_crtc_state->wm.skl.ddb;
 			update_pipes &= ~BIT(pipe);
 
-			intel_update_crtc(crtc, state, old_crtc_state,
-					  new_crtc_state);
+			intel_update_crtc(state, crtc);
 
 			/*
 			 * If this is an already active pipe, it's DDB changed,
@@ -15381,67 +15224,62 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
 		}
 	}
 
+	update_pipes = modeset_pipes;
+
 	/*
 	 * Enable all pipes that needs a modeset and do not depends on other
 	 * pipes
 	 */
-	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
-					    new_crtc_state, i) {
+	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
 		enum pipe pipe = crtc->pipe;
 
 		if ((modeset_pipes & BIT(pipe)) == 0)
 			continue;
 
 		if (intel_dp_mst_is_slave_trans(new_crtc_state) ||
-		    is_trans_port_sync_slave(new_crtc_state))
+		    is_trans_port_sync_master(new_crtc_state))
 			continue;
 
-		drm_WARN_ON(&dev_priv->drm, skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb,
-									entries, I915_MAX_PIPES, pipe));
-
-		entries[pipe] = new_crtc_state->wm.skl.ddb;
 		modeset_pipes &= ~BIT(pipe);
 
-		if (is_trans_port_sync_mode(new_crtc_state)) {
-			struct intel_crtc *slave_crtc;
+		intel_enable_crtc(state, crtc);
+	}
 
-			intel_update_trans_port_sync_crtcs(crtc, state,
-							   old_crtc_state,
-							   new_crtc_state);
+	/*
+	 * Then we enable all remaining pipes that depend on other
+	 * pipes: MST slaves and port sync masters.
+	 */
+	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
+		enum pipe pipe = crtc->pipe;
 
-			slave_crtc = intel_get_slave_crtc(new_crtc_state);
-			/* TODO: update entries[] of slave */
-			modeset_pipes &= ~BIT(slave_crtc->pipe);
+		if ((modeset_pipes & BIT(pipe)) == 0)
+			continue;
 
-		} else {
-			intel_update_crtc(crtc, state, old_crtc_state,
-					  new_crtc_state);
-		}
+		modeset_pipes &= ~BIT(pipe);
+
+		intel_enable_crtc(state, crtc);
 	}
 
 	/*
-	 * Finally enable all pipes that needs a modeset and depends on
-	 * other pipes, right now it is only MST slaves as both port sync slave
-	 * and master are enabled together
+	 * Finally we do the plane updates/etc. for all pipes that got enabled.
 	 */
-	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
-					    new_crtc_state, i) {
+	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
 		enum pipe pipe = crtc->pipe;
 
-		if ((modeset_pipes & BIT(pipe)) == 0)
+		if ((update_pipes & BIT(pipe)) == 0)
 			continue;
 
 		drm_WARN_ON(&dev_priv->drm, skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb,
 									entries, I915_MAX_PIPES, pipe));
 
 		entries[pipe] = new_crtc_state->wm.skl.ddb;
-		modeset_pipes &= ~BIT(pipe);
+		update_pipes &= ~BIT(pipe);
 
-		intel_update_crtc(crtc, state, old_crtc_state, new_crtc_state);
+		intel_update_crtc(state, crtc);
 	}
 
 	drm_WARN_ON(&dev_priv->drm, modeset_pipes);
-
+	drm_WARN_ON(&dev_priv->drm, update_pipes);
 }
 
 static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv)
@@ -15540,12 +15378,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
 
 		intel_set_cdclk_pre_plane_update(state);
 
-		/*
-		 * SKL workaround: bspec recommends we disable the SAGV when we
-		 * have more then one pipe enabled
-		 */
-		if (!intel_can_enable_sagv(state))
-			intel_disable_sagv(dev_priv);
+		intel_sagv_pre_plane_update(state);
 
 		intel_modeset_verify_disabled(dev_priv, state);
 	}
@@ -15642,11 +15475,11 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
 	intel_check_cpu_fifo_underruns(dev_priv);
 	intel_check_pch_fifo_underruns(dev_priv);
 
-	if (state->modeset)
+	if (state->modeset) {
 		intel_verify_planes(state);
 
-	if (state->modeset && intel_can_enable_sagv(state))
-		intel_enable_sagv(dev_priv);
+		intel_sagv_post_plane_update(state);
+	}
 
 	drm_atomic_helper_commit_hw_done(&state->base);
 
@@ -18261,11 +18094,12 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder)
 			best_encoder = connector->base.state->best_encoder;
 			connector->base.state->best_encoder = &encoder->base;
 
+			/* FIXME NULL atomic state passed! */
 			if (encoder->disable)
-				encoder->disable(encoder, crtc_state,
+				encoder->disable(NULL, encoder, crtc_state,
 						 connector->base.state);
 			if (encoder->post_disable)
-				encoder->post_disable(encoder, crtc_state,
+				encoder->post_disable(NULL, encoder, crtc_state,
 						      connector->base.state);
 
 			connector->base.state->best_encoder = best_encoder;
@@ -18802,15 +18636,6 @@ void intel_modeset_driver_remove_noirq(struct drm_i915_private *i915)
 
 #if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR)
 
-static bool
-has_transcoder(struct drm_i915_private *dev_priv, enum transcoder cpu_transcoder)
-{
-	if (cpu_transcoder == TRANSCODER_EDP)
-		return HAS_TRANSCODER_EDP(dev_priv);
-	else
-		return INTEL_INFO(dev_priv)->pipe_mask & BIT(cpu_transcoder);
-}
-
 struct intel_display_error_state {
 
 	u32 power_well_driver;
@@ -18919,7 +18744,7 @@ intel_display_capture_error_state(struct drm_i915_private *dev_priv)
 	for (i = 0; i < ARRAY_SIZE(error->transcoder); i++) {
 		enum transcoder cpu_transcoder = transcoders[i];
 
-		if (!has_transcoder(dev_priv, cpu_transcoder))
+		if (!HAS_TRANSCODER(dev_priv, cpu_transcoder))
 			continue;
 
 		error->transcoder[i].available = true;
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index adb1225a3480..efb4da205ea2 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -320,9 +320,13 @@ enum phy_fia {
 	for_each_pipe(__dev_priv, __p) \
 		for_each_if((__mask) & BIT(__p))
 
-#define for_each_cpu_transcoder_masked(__dev_priv, __t, __mask) \
+#define for_each_cpu_transcoder(__dev_priv, __t) \
 	for ((__t) = 0; (__t) < I915_MAX_TRANSCODERS; (__t)++)	\
-		for_each_if ((__mask) & (1 << (__t)))
+		for_each_if (INTEL_INFO(__dev_priv)->cpu_transcoder_mask & BIT(__t))
+
+#define for_each_cpu_transcoder_masked(__dev_priv, __t, __mask) \
+	for_each_cpu_transcoder(__dev_priv, __t) \
+		for_each_if ((__mask) & BIT(__t))
 
 #define for_each_universal_plane(__dev_priv, __pipe, __p)		\
 	for ((__p) = 0;							\
@@ -579,13 +583,14 @@ void hsw_disable_ips(const struct intel_crtc_state *crtc_state);
 enum intel_display_power_domain intel_port_to_power_domain(enum port port);
 enum intel_display_power_domain
 intel_aux_power_domain(struct intel_digital_port *dig_port);
+enum intel_display_power_domain
+intel_legacy_aux_to_power_domain(enum aux_ch aux_ch);
 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
 				 struct intel_crtc_state *pipe_config);
 void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
 				  struct intel_crtc_state *crtc_state);
 
 u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_center);
-int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
 void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state);
 void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state);
 u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index 1e6eb7f2f72d..70525623bcdf 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -9,6 +9,7 @@
 #include "i915_debugfs.h"
 #include "intel_csr.h"
 #include "intel_display_debugfs.h"
+#include "intel_display_power.h"
 #include "intel_display_types.h"
 #include "intel_dp.h"
 #include "intel_fbc.h"
@@ -631,15 +632,9 @@ static void intel_dp_info(struct seq_file *m,
 }
 
 static void intel_dp_mst_info(struct seq_file *m,
-			  struct intel_connector *intel_connector)
+			      struct intel_connector *intel_connector)
 {
-	struct intel_encoder *intel_encoder = intel_attached_encoder(intel_connector);
-	struct intel_dp_mst_encoder *intel_mst =
-		enc_to_mst(intel_encoder);
-	struct intel_digital_port *intel_dig_port = intel_mst->primary;
-	struct intel_dp *intel_dp = &intel_dig_port->dp;
-	bool has_audio = drm_dp_mst_port_has_audio(&intel_dp->mst_mgr,
-					intel_connector->port);
+	bool has_audio = intel_connector->port->has_audio;
 
 	seq_printf(m, "\taudio support: %s\n", yesno(has_audio));
 }
@@ -1149,6 +1144,51 @@ static int i915_drrs_status(struct seq_file *m, void *unused)
 	return 0;
 }
 
+#define LPSP_STATUS(COND) (COND ? seq_puts(m, "LPSP: enabled\n") : \
+				seq_puts(m, "LPSP: disabled\n"))
+
+static bool
+intel_lpsp_power_well_enabled(struct drm_i915_private *i915,
+			      enum i915_power_well_id power_well_id)
+{
+	intel_wakeref_t wakeref;
+	bool is_enabled;
+
+	wakeref = intel_runtime_pm_get(&i915->runtime_pm);
+	is_enabled = intel_display_power_well_is_enabled(i915,
+							 power_well_id);
+	intel_runtime_pm_put(&i915->runtime_pm, wakeref);
+
+	return is_enabled;
+}
+
+static int i915_lpsp_status(struct seq_file *m, void *unused)
+{
+	struct drm_i915_private *i915 = node_to_i915(m->private);
+
+	switch (INTEL_GEN(i915)) {
+	case 12:
+	case 11:
+		LPSP_STATUS(!intel_lpsp_power_well_enabled(i915, ICL_DISP_PW_3));
+		break;
+	case 10:
+	case 9:
+		LPSP_STATUS(!intel_lpsp_power_well_enabled(i915, SKL_DISP_PW_2));
+		break;
+	default:
+		/*
+		 * Apart from HASWELL/BROADWELL other legacy platform doesn't
+		 * support lpsp.
+		 */
+		if (IS_HASWELL(i915) || IS_BROADWELL(i915))
+			LPSP_STATUS(!intel_lpsp_power_well_enabled(i915, HSW_DISP_PW_GLOBAL));
+		else
+			seq_puts(m, "LPSP: not supported\n");
+	}
+
+	return 0;
+}
+
 static int i915_dp_mst_info(struct seq_file *m, void *unused)
 {
 	struct drm_i915_private *dev_priv = node_to_i915(m->private);
@@ -1326,6 +1366,16 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
 					   intel_dp->compliance.test_data.vdisplay);
 				seq_printf(m, "bpc: %u\n",
 					   intel_dp->compliance.test_data.bpc);
+			} else if (intel_dp->compliance.test_type ==
+				   DP_TEST_LINK_PHY_TEST_PATTERN) {
+				seq_printf(m, "pattern: %d\n",
+					   intel_dp->compliance.test_data.phytest.phy_pattern);
+				seq_printf(m, "Number of lanes: %d\n",
+					   intel_dp->compliance.test_data.phytest.num_lanes);
+				seq_printf(m, "Link Rate: %d\n",
+					   intel_dp->compliance.test_data.phytest.link_rate);
+				seq_printf(m, "level: %02x\n",
+					   intel_dp->train_set[0]);
 			}
 		} else
 			seq_puts(m, "0");
@@ -1358,7 +1408,7 @@ static int i915_displayport_test_type_show(struct seq_file *m, void *data)
 
 		if (encoder && connector->status == connector_status_connected) {
 			intel_dp = enc_to_intel_dp(encoder);
-			seq_printf(m, "%02lx", intel_dp->compliance.test_type);
+			seq_printf(m, "%02lx\n", intel_dp->compliance.test_type);
 		} else
 			seq_puts(m, "0");
 	}
@@ -1906,6 +1956,7 @@ static const struct drm_info_list intel_display_debugfs_list[] = {
 	{"i915_dp_mst_info", i915_dp_mst_info, 0},
 	{"i915_ddb_info", i915_ddb_info, 0},
 	{"i915_drrs_status", i915_drrs_status, 0},
+	{"i915_lpsp_status", i915_lpsp_status, 0},
 };
 
 static const struct {
@@ -1927,7 +1978,7 @@ static const struct {
 	{"i915_edp_psr_debug", &i915_edp_psr_debug_fops},
 };
 
-int intel_display_debugfs_register(struct drm_i915_private *i915)
+void intel_display_debugfs_register(struct drm_i915_private *i915)
 {
 	struct drm_minor *minor = i915->drm.primary;
 	int i;
@@ -1940,9 +1991,9 @@ int intel_display_debugfs_register(struct drm_i915_private *i915)
 				    intel_display_debugfs_files[i].fops);
 	}
 
-	return drm_debugfs_create_files(intel_display_debugfs_list,
-					ARRAY_SIZE(intel_display_debugfs_list),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(intel_display_debugfs_list,
+				 ARRAY_SIZE(intel_display_debugfs_list),
+				 minor->debugfs_root, minor);
 }
 
 static int i915_panel_show(struct seq_file *m, void *data)
@@ -1987,6 +2038,48 @@ static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data)
 }
 DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
 
+#define LPSP_CAPABLE(COND) (COND ? seq_puts(m, "LPSP: capable\n") : \
+				seq_puts(m, "LPSP: incapable\n"))
+
+static int i915_lpsp_capability_show(struct seq_file *m, void *data)
+{
+	struct drm_connector *connector = m->private;
+	struct intel_encoder *encoder =
+			intel_attached_encoder(to_intel_connector(connector));
+	struct drm_i915_private *i915 = to_i915(connector->dev);
+
+	if (connector->status != connector_status_connected)
+		return -ENODEV;
+
+	switch (INTEL_GEN(i915)) {
+	case 12:
+		/*
+		 * Actually TGL can drive LPSP on port till DDI_C
+		 * but there is no physical connected DDI_C on TGL sku's,
+		 * even driver is not initilizing DDI_C port for gen12.
+		 */
+		LPSP_CAPABLE(encoder->port <= PORT_B);
+		break;
+	case 11:
+		LPSP_CAPABLE(connector->connector_type == DRM_MODE_CONNECTOR_DSI ||
+			     connector->connector_type == DRM_MODE_CONNECTOR_eDP);
+		break;
+	case 10:
+	case 9:
+		LPSP_CAPABLE(encoder->port == PORT_A &&
+			     (connector->connector_type == DRM_MODE_CONNECTOR_DSI ||
+			     connector->connector_type == DRM_MODE_CONNECTOR_eDP  ||
+			     connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort));
+		break;
+	default:
+		if (IS_HASWELL(i915) || IS_BROADWELL(i915))
+			LPSP_CAPABLE(connector->connector_type == DRM_MODE_CONNECTOR_eDP);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(i915_lpsp_capability);
+
 static int i915_dsc_fec_support_show(struct seq_file *m, void *data)
 {
 	struct drm_connector *connector = m->private;
@@ -2130,5 +2223,16 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
 		debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
 				    connector, &i915_dsc_fec_support_fops);
 
+	/* Legacy panels doesn't lpsp on any platform */
+	if ((INTEL_GEN(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
+	     IS_BROADWELL(dev_priv)) &&
+	     (connector->connector_type == DRM_MODE_CONNECTOR_DSI ||
+	     connector->connector_type == DRM_MODE_CONNECTOR_eDP ||
+	     connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
+	     connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+	     connector->connector_type == DRM_MODE_CONNECTOR_HDMIB))
+		debugfs_create_file("i915_lpsp_capability", 0444, root,
+				    connector, &i915_lpsp_capability_fops);
+
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.h b/drivers/gpu/drm/i915/display/intel_display_debugfs.h
index a3bea1ce04c2..c922c1745bfe 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.h
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.h
@@ -10,10 +10,10 @@ struct drm_connector;
 struct drm_i915_private;
 
 #ifdef CONFIG_DEBUG_FS
-int intel_display_debugfs_register(struct drm_i915_private *i915);
+void intel_display_debugfs_register(struct drm_i915_private *i915);
 int intel_connector_debugfs_add(struct drm_connector *connector);
 #else
-static inline int intel_display_debugfs_register(struct drm_i915_private *i915) { return 0; }
+static inline void intel_display_debugfs_register(struct drm_i915_private *i915) {}
 static inline int intel_connector_debugfs_add(struct drm_connector *connector) { return 0; }
 #endif
 
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 84ecf8e58523..49998906cc61 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -151,6 +151,8 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
 		return "GT_IRQ";
 	case POWER_DOMAIN_DPLL_DC_OFF:
 		return "DPLL_DC_OFF";
+	case POWER_DOMAIN_TC_COLD_OFF:
+		return "TC_COLD_OFF";
 	default:
 		MISSING_CASE(domain);
 		return "?";
@@ -282,8 +284,51 @@ static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv,
 		gen8_irq_power_well_pre_disable(dev_priv, irq_pipe_mask);
 }
 
+#define ICL_AUX_PW_TO_CH(pw_idx)	\
+	((pw_idx) - ICL_PW_CTL_IDX_AUX_A + AUX_CH_A)
+
+#define ICL_TBT_AUX_PW_TO_CH(pw_idx)	\
+	((pw_idx) - ICL_PW_CTL_IDX_AUX_TBT1 + AUX_CH_C)
+
+static enum aux_ch icl_tc_phy_aux_ch(struct drm_i915_private *dev_priv,
+				     struct i915_power_well *power_well)
+{
+	int pw_idx = power_well->desc->hsw.idx;
+
+	return power_well->desc->hsw.is_tc_tbt ? ICL_TBT_AUX_PW_TO_CH(pw_idx) :
+						 ICL_AUX_PW_TO_CH(pw_idx);
+}
+
+static struct intel_digital_port *
+aux_ch_to_digital_port(struct drm_i915_private *dev_priv,
+		       enum aux_ch aux_ch)
+{
+	struct intel_digital_port *dig_port = NULL;
+	struct intel_encoder *encoder;
+
+	for_each_intel_encoder(&dev_priv->drm, encoder) {
+		/* We'll check the MST primary port */
+		if (encoder->type == INTEL_OUTPUT_DP_MST)
+			continue;
+
+		dig_port = enc_to_dig_port(encoder);
+		if (!dig_port)
+			continue;
+
+		if (dig_port->aux_ch != aux_ch) {
+			dig_port = NULL;
+			continue;
+		}
+
+		break;
+	}
+
+	return dig_port;
+}
+
 static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv,
-					   struct i915_power_well *power_well)
+					   struct i915_power_well *power_well,
+					   bool timeout_expected)
 {
 	const struct i915_power_well_regs *regs = power_well->desc->hsw.regs;
 	int pw_idx = power_well->desc->hsw.idx;
@@ -294,8 +339,8 @@ static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv,
 		drm_dbg_kms(&dev_priv->drm, "%s power well enable timeout\n",
 			    power_well->desc->name);
 
-		/* An AUX timeout is expected if the TBT DP tunnel is down. */
-		drm_WARN_ON(&dev_priv->drm, !power_well->desc->hsw.is_tc_tbt);
+		drm_WARN_ON(&dev_priv->drm, !timeout_expected);
+
 	}
 }
 
@@ -358,11 +403,11 @@ static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
 {
 	const struct i915_power_well_regs *regs = power_well->desc->hsw.regs;
 	int pw_idx = power_well->desc->hsw.idx;
-	bool wait_fuses = power_well->desc->hsw.has_fuses;
-	enum skl_power_gate uninitialized_var(pg);
 	u32 val;
 
-	if (wait_fuses) {
+	if (power_well->desc->hsw.has_fuses) {
+		enum skl_power_gate pg;
+
 		pg = INTEL_GEN(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) :
 						 SKL_PW_CTL_IDX_TO_PG(pw_idx);
 		/*
@@ -379,19 +424,27 @@ static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
 	val = intel_de_read(dev_priv, regs->driver);
 	intel_de_write(dev_priv, regs->driver,
 		       val | HSW_PWR_WELL_CTL_REQ(pw_idx));
-	hsw_wait_for_power_well_enable(dev_priv, power_well);
+
+	hsw_wait_for_power_well_enable(dev_priv, power_well, false);
 
 	/* Display WA #1178: cnl */
 	if (IS_CANNONLAKE(dev_priv) &&
 	    pw_idx >= GLK_PW_CTL_IDX_AUX_B &&
 	    pw_idx <= CNL_PW_CTL_IDX_AUX_F) {
+		u32 val;
+
 		val = intel_de_read(dev_priv, CNL_AUX_ANAOVRD1(pw_idx));
 		val |= CNL_AUX_ANAOVRD1_ENABLE | CNL_AUX_ANAOVRD1_LDO_BYPASS;
 		intel_de_write(dev_priv, CNL_AUX_ANAOVRD1(pw_idx), val);
 	}
 
-	if (wait_fuses)
+	if (power_well->desc->hsw.has_fuses) {
+		enum skl_power_gate pg;
+
+		pg = INTEL_GEN(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) :
+						 SKL_PW_CTL_IDX_TO_PG(pw_idx);
 		gen9_wait_for_power_well_fuses(dev_priv, pg);
+	}
 
 	hsw_power_well_post_enable(dev_priv,
 				   power_well->desc->hsw.irq_pipe_mask,
@@ -437,7 +490,7 @@ icl_combo_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
 			       val | ICL_LANE_ENABLE_AUX);
 	}
 
-	hsw_wait_for_power_well_enable(dev_priv, power_well);
+	hsw_wait_for_power_well_enable(dev_priv, power_well, false);
 
 	/* Display WA #1178: icl */
 	if (pw_idx >= ICL_PW_CTL_IDX_AUX_A && pw_idx <= ICL_PW_CTL_IDX_AUX_B &&
@@ -470,21 +523,6 @@ icl_combo_phy_aux_power_well_disable(struct drm_i915_private *dev_priv,
 	hsw_wait_for_power_well_disable(dev_priv, power_well);
 }
 
-#define ICL_AUX_PW_TO_CH(pw_idx)	\
-	((pw_idx) - ICL_PW_CTL_IDX_AUX_A + AUX_CH_A)
-
-#define ICL_TBT_AUX_PW_TO_CH(pw_idx)	\
-	((pw_idx) - ICL_PW_CTL_IDX_AUX_TBT1 + AUX_CH_C)
-
-static enum aux_ch icl_tc_phy_aux_ch(struct drm_i915_private *dev_priv,
-				     struct i915_power_well *power_well)
-{
-	int pw_idx = power_well->desc->hsw.idx;
-
-	return power_well->desc->hsw.is_tc_tbt ? ICL_TBT_AUX_PW_TO_CH(pw_idx) :
-						 ICL_AUX_PW_TO_CH(pw_idx);
-}
-
 #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM)
 
 static u64 async_put_domains_mask(struct i915_power_domains *power_domains);
@@ -501,51 +539,28 @@ static int power_well_async_ref_count(struct drm_i915_private *dev_priv,
 }
 
 static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv,
-					struct i915_power_well *power_well)
+					struct i915_power_well *power_well,
+					struct intel_digital_port *dig_port)
 {
-	enum aux_ch aux_ch = icl_tc_phy_aux_ch(dev_priv, power_well);
-	struct intel_digital_port *dig_port = NULL;
-	struct intel_encoder *encoder;
-
 	/* Bypass the check if all references are released asynchronously */
 	if (power_well_async_ref_count(dev_priv, power_well) ==
 	    power_well->count)
 		return;
 
-	aux_ch = icl_tc_phy_aux_ch(dev_priv, power_well);
-
-	for_each_intel_encoder(&dev_priv->drm, encoder) {
-		enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
-
-		if (!intel_phy_is_tc(dev_priv, phy))
-			continue;
-
-		/* We'll check the MST primary port */
-		if (encoder->type == INTEL_OUTPUT_DP_MST)
-			continue;
-
-		dig_port = enc_to_dig_port(encoder);
-		if (drm_WARN_ON(&dev_priv->drm, !dig_port))
-			continue;
-
-		if (dig_port->aux_ch != aux_ch) {
-			dig_port = NULL;
-			continue;
-		}
-
-		break;
-	}
-
 	if (drm_WARN_ON(&dev_priv->drm, !dig_port))
 		return;
 
+	if (INTEL_GEN(dev_priv) == 11 && dig_port->tc_legacy_port)
+		return;
+
 	drm_WARN_ON(&dev_priv->drm, !intel_tc_port_ref_held(dig_port));
 }
 
 #else
 
 static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv,
-					struct i915_power_well *power_well)
+					struct i915_power_well *power_well,
+					struct intel_digital_port *dig_port)
 {
 }
 
@@ -553,24 +568,65 @@ static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv,
 
 #define TGL_AUX_PW_TO_TC_PORT(pw_idx)	((pw_idx) - TGL_PW_CTL_IDX_AUX_TC1)
 
+static void icl_tc_cold_exit(struct drm_i915_private *i915)
+{
+	int ret, tries = 0;
+
+	while (1) {
+		ret = sandybridge_pcode_write_timeout(i915,
+						      ICL_PCODE_EXIT_TCCOLD,
+						      0, 250, 1);
+		if (ret != -EAGAIN || ++tries == 3)
+			break;
+		msleep(1);
+	}
+
+	/* Spec states that TC cold exit can take up to 1ms to complete */
+	if (!ret)
+		msleep(1);
+
+	/* TODO: turn failure into a error as soon i915 CI updates ICL IFWI */
+	drm_dbg_kms(&i915->drm, "TC cold block %s\n", ret ? "failed" :
+		    "succeeded");
+}
+
 static void
 icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
 				 struct i915_power_well *power_well)
 {
 	enum aux_ch aux_ch = icl_tc_phy_aux_ch(dev_priv, power_well);
+	struct intel_digital_port *dig_port = aux_ch_to_digital_port(dev_priv, aux_ch);
+	const struct i915_power_well_regs *regs = power_well->desc->hsw.regs;
+	bool is_tbt = power_well->desc->hsw.is_tc_tbt;
+	bool timeout_expected;
 	u32 val;
 
-	icl_tc_port_assert_ref_held(dev_priv, power_well);
+	icl_tc_port_assert_ref_held(dev_priv, power_well, dig_port);
 
 	val = intel_de_read(dev_priv, DP_AUX_CH_CTL(aux_ch));
 	val &= ~DP_AUX_CH_CTL_TBT_IO;
-	if (power_well->desc->hsw.is_tc_tbt)
+	if (is_tbt)
 		val |= DP_AUX_CH_CTL_TBT_IO;
 	intel_de_write(dev_priv, DP_AUX_CH_CTL(aux_ch), val);
 
-	hsw_power_well_enable(dev_priv, power_well);
+	val = intel_de_read(dev_priv, regs->driver);
+	intel_de_write(dev_priv, regs->driver,
+		       val | HSW_PWR_WELL_CTL_REQ(power_well->desc->hsw.idx));
+
+	/*
+	 * An AUX timeout is expected if the TBT DP tunnel is down,
+	 * or need to enable AUX on a legacy TypeC port as part of the TC-cold
+	 * exit sequence.
+	 */
+	timeout_expected = is_tbt;
+	if (INTEL_GEN(dev_priv) == 11 && dig_port->tc_legacy_port) {
+		icl_tc_cold_exit(dev_priv);
+		timeout_expected = true;
+	}
+
+	hsw_wait_for_power_well_enable(dev_priv, power_well, timeout_expected);
 
-	if (INTEL_GEN(dev_priv) >= 12 && !power_well->desc->hsw.is_tc_tbt) {
+	if (INTEL_GEN(dev_priv) >= 12 && !is_tbt) {
 		enum tc_port tc_port;
 
 		tc_port = TGL_AUX_PW_TO_TC_PORT(power_well->desc->hsw.idx);
@@ -588,11 +644,48 @@ static void
 icl_tc_phy_aux_power_well_disable(struct drm_i915_private *dev_priv,
 				  struct i915_power_well *power_well)
 {
-	icl_tc_port_assert_ref_held(dev_priv, power_well);
+	enum aux_ch aux_ch = icl_tc_phy_aux_ch(dev_priv, power_well);
+	struct intel_digital_port *dig_port = aux_ch_to_digital_port(dev_priv, aux_ch);
+
+	icl_tc_port_assert_ref_held(dev_priv, power_well, dig_port);
 
 	hsw_power_well_disable(dev_priv, power_well);
 }
 
+static void
+icl_aux_power_well_enable(struct drm_i915_private *dev_priv,
+			  struct i915_power_well *power_well)
+{
+	int pw_idx = power_well->desc->hsw.idx;
+	enum phy phy = ICL_AUX_PW_TO_PHY(pw_idx);  /* non-TBT only */
+	bool is_tbt = power_well->desc->hsw.is_tc_tbt;
+
+	if (is_tbt || intel_phy_is_tc(dev_priv, phy))
+		return icl_tc_phy_aux_power_well_enable(dev_priv, power_well);
+	else if (IS_ICELAKE(dev_priv))
+		return icl_combo_phy_aux_power_well_enable(dev_priv,
+							   power_well);
+	else
+		return hsw_power_well_enable(dev_priv, power_well);
+}
+
+static void
+icl_aux_power_well_disable(struct drm_i915_private *dev_priv,
+			   struct i915_power_well *power_well)
+{
+	int pw_idx = power_well->desc->hsw.idx;
+	enum phy phy = ICL_AUX_PW_TO_PHY(pw_idx);  /* non-TBT only */
+	bool is_tbt = power_well->desc->hsw.is_tc_tbt;
+
+	if (is_tbt || intel_phy_is_tc(dev_priv, phy))
+		return icl_tc_phy_aux_power_well_disable(dev_priv, power_well);
+	else if (IS_ICELAKE(dev_priv))
+		return icl_combo_phy_aux_power_well_disable(dev_priv,
+							    power_well);
+	else
+		return hsw_power_well_disable(dev_priv, power_well);
+}
+
 /*
  * We should only use the power well if we explicitly asked the hardware to
  * enable it, so check if it's enabled and also check if we've requested it to
@@ -943,7 +1036,7 @@ static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
 
 	/* Power wells at this level and above must be disabled for DC5 entry */
 	if (INTEL_GEN(dev_priv) >= 12)
-		high_pg = TGL_DISP_PW_3;
+		high_pg = ICL_DISP_PW_3;
 	else
 		high_pg = SKL_DISP_PW_2;
 
@@ -1873,20 +1966,27 @@ __async_put_domains_state_ok(struct i915_power_domains *power_domains)
 static void print_power_domains(struct i915_power_domains *power_domains,
 				const char *prefix, u64 mask)
 {
+	struct drm_i915_private *i915 = container_of(power_domains,
+						     struct drm_i915_private,
+						     power_domains);
 	enum intel_display_power_domain domain;
 
-	DRM_DEBUG_DRIVER("%s (%lu):\n", prefix, hweight64(mask));
+	drm_dbg(&i915->drm, "%s (%lu):\n", prefix, hweight64(mask));
 	for_each_power_domain(domain, mask)
-		DRM_DEBUG_DRIVER("%s use_count %d\n",
-				 intel_display_power_domain_str(domain),
-				 power_domains->domain_use_count[domain]);
+		drm_dbg(&i915->drm, "%s use_count %d\n",
+			intel_display_power_domain_str(domain),
+			power_domains->domain_use_count[domain]);
 }
 
 static void
 print_async_put_domains_state(struct i915_power_domains *power_domains)
 {
-	DRM_DEBUG_DRIVER("async_put_wakeref %u\n",
-			 power_domains->async_put_wakeref);
+	struct drm_i915_private *i915 = container_of(power_domains,
+						     struct drm_i915_private,
+						     power_domains);
+
+	drm_dbg(&i915->drm, "async_put_wakeref %u\n",
+		power_domains->async_put_wakeref);
 
 	print_power_domains(power_domains, "async_put_domains[0]",
 			    power_domains->async_put_domains[0]);
@@ -2798,6 +2898,21 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
 #define TGL_AUX_I_TBT6_IO_POWER_DOMAINS (	\
 	BIT_ULL(POWER_DOMAIN_AUX_I_TBT))
 
+#define TGL_TC_COLD_OFF_POWER_DOMAINS (		\
+	BIT_ULL(POWER_DOMAIN_AUX_D)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_E)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_F)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_G)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_H)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_I)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_D_TBT)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_E_TBT)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_F_TBT)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_G_TBT)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_H_TBT)	|	\
+	BIT_ULL(POWER_DOMAIN_AUX_I_TBT)	|	\
+	BIT_ULL(POWER_DOMAIN_TC_COLD_OFF))
+
 static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
 	.sync_hw = i9xx_power_well_sync_hw_noop,
 	.enable = i9xx_always_on_power_well_noop,
@@ -3496,17 +3611,10 @@ static const struct i915_power_well_desc cnl_power_wells[] = {
 	},
 };
 
-static const struct i915_power_well_ops icl_combo_phy_aux_power_well_ops = {
-	.sync_hw = hsw_power_well_sync_hw,
-	.enable = icl_combo_phy_aux_power_well_enable,
-	.disable = icl_combo_phy_aux_power_well_disable,
-	.is_enabled = hsw_power_well_enabled,
-};
-
-static const struct i915_power_well_ops icl_tc_phy_aux_power_well_ops = {
+static const struct i915_power_well_ops icl_aux_power_well_ops = {
 	.sync_hw = hsw_power_well_sync_hw,
-	.enable = icl_tc_phy_aux_power_well_enable,
-	.disable = icl_tc_phy_aux_power_well_disable,
+	.enable = icl_aux_power_well_enable,
+	.disable = icl_aux_power_well_disable,
 	.is_enabled = hsw_power_well_enabled,
 };
 
@@ -3564,7 +3672,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 		.name = "power well 3",
 		.domains = ICL_PW_3_POWER_DOMAINS,
 		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
+		.id = ICL_DISP_PW_3,
 		{
 			.hsw.regs = &hsw_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_PW_3,
@@ -3636,7 +3744,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX A",
 		.domains = ICL_AUX_A_IO_POWER_DOMAINS,
-		.ops = &icl_combo_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3646,7 +3754,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX B",
 		.domains = ICL_AUX_B_IO_POWER_DOMAINS,
-		.ops = &icl_combo_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3656,7 +3764,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX C TC1",
 		.domains = ICL_AUX_C_TC1_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3667,7 +3775,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX D TC2",
 		.domains = ICL_AUX_D_TC2_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3678,7 +3786,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX E TC3",
 		.domains = ICL_AUX_E_TC3_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3689,7 +3797,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX F TC4",
 		.domains = ICL_AUX_F_TC4_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3700,7 +3808,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX C TBT1",
 		.domains = ICL_AUX_C_TBT1_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3711,7 +3819,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX D TBT2",
 		.domains = ICL_AUX_D_TBT2_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3722,7 +3830,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX E TBT3",
 		.domains = ICL_AUX_E_TBT3_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3733,7 +3841,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	{
 		.name = "AUX F TBT4",
 		.domains = ICL_AUX_F_TBT4_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -3755,149 +3863,89 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 	},
 };
 
-static const struct i915_power_well_desc ehl_power_wells[] = {
-	{
-		.name = "always-on",
-		.always_on = true,
-		.domains = POWER_DOMAIN_MASK,
-		.ops = &i9xx_always_on_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-	},
-	{
-		.name = "power well 1",
-		/* Handled by the DMC firmware */
-		.always_on = true,
-		.domains = 0,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_1,
-		{
-			.hsw.regs = &hsw_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_PW_1,
-			.hsw.has_fuses = true,
-		},
-	},
-	{
-		.name = "DC off",
-		.domains = ICL_DISPLAY_DC_OFF_POWER_DOMAINS,
-		.ops = &gen9_dc_off_power_well_ops,
-		.id = SKL_DISP_DC_OFF,
-	},
-	{
-		.name = "power well 2",
-		.domains = ICL_PW_2_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_2,
-		{
-			.hsw.regs = &hsw_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_PW_2,
-			.hsw.has_fuses = true,
-		},
-	},
-	{
-		.name = "power well 3",
-		.domains = ICL_PW_3_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &hsw_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_PW_3,
-			.hsw.irq_pipe_mask = BIT(PIPE_B),
-			.hsw.has_vga = true,
-			.hsw.has_fuses = true,
-		},
-	},
-	{
-		.name = "DDI A IO",
-		.domains = ICL_DDI_IO_A_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &icl_ddi_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_DDI_A,
-		},
-	},
-	{
-		.name = "DDI B IO",
-		.domains = ICL_DDI_IO_B_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &icl_ddi_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_DDI_B,
-		},
-	},
-	{
-		.name = "DDI C IO",
-		.domains = ICL_DDI_IO_C_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &icl_ddi_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_DDI_C,
-		},
-	},
-	{
-		.name = "DDI D IO",
-		.domains = ICL_DDI_IO_D_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &icl_ddi_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_DDI_D,
-		},
-	},
-	{
-		.name = "AUX A",
-		.domains = ICL_AUX_A_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &icl_aux_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_AUX_A,
-		},
-	},
-	{
-		.name = "AUX B",
-		.domains = ICL_AUX_B_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &icl_aux_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_AUX_B,
-		},
-	},
-	{
-		.name = "AUX C",
-		.domains = ICL_AUX_C_TC1_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &icl_aux_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_AUX_C,
-		},
-	},
-	{
-		.name = "AUX D",
-		.domains = ICL_AUX_D_TC2_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &icl_aux_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_AUX_D,
-		},
-	},
-	{
-		.name = "power well 4",
-		.domains = ICL_PW_4_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = DISP_PW_ID_NONE,
-		{
-			.hsw.regs = &hsw_power_well_regs,
-			.hsw.idx = ICL_PW_CTL_IDX_PW_4,
-			.hsw.has_fuses = true,
-			.hsw.irq_pipe_mask = BIT(PIPE_C),
-		},
-	},
+static void
+tgl_tc_cold_request(struct drm_i915_private *i915, bool block)
+{
+	u8 tries = 0;
+	int ret;
+
+	while (1) {
+		u32 low_val = 0, high_val;
+
+		if (block)
+			high_val = TGL_PCODE_EXIT_TCCOLD_DATA_H_BLOCK_REQ;
+		else
+			high_val = TGL_PCODE_EXIT_TCCOLD_DATA_H_UNBLOCK_REQ;
+
+		/*
+		 * Spec states that we should timeout the request after 200us
+		 * but the function below will timeout after 500us
+		 */
+		ret = sandybridge_pcode_read(i915, TGL_PCODE_TCCOLD, &low_val,
+					     &high_val);
+		if (ret == 0) {
+			if (block &&
+			    (low_val & TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED))
+				ret = -EIO;
+			else
+				break;
+		}
+
+		if (++tries == 3)
+			break;
+
+		if (ret == -EAGAIN)
+			msleep(1);
+	}
+
+	if (ret)
+		drm_err(&i915->drm, "TC cold %sblock failed\n",
+			block ? "" : "un");
+	else
+		drm_dbg_kms(&i915->drm, "TC cold %sblock succeeded\n",
+			    block ? "" : "un");
+}
+
+static void
+tgl_tc_cold_off_power_well_enable(struct drm_i915_private *i915,
+				  struct i915_power_well *power_well)
+{
+	tgl_tc_cold_request(i915, true);
+}
+
+static void
+tgl_tc_cold_off_power_well_disable(struct drm_i915_private *i915,
+				   struct i915_power_well *power_well)
+{
+	tgl_tc_cold_request(i915, false);
+}
+
+static void
+tgl_tc_cold_off_power_well_sync_hw(struct drm_i915_private *i915,
+				   struct i915_power_well *power_well)
+{
+	if (power_well->count > 0)
+		tgl_tc_cold_off_power_well_enable(i915, power_well);
+	else
+		tgl_tc_cold_off_power_well_disable(i915, power_well);
+}
+
+static bool
+tgl_tc_cold_off_power_well_is_enabled(struct drm_i915_private *dev_priv,
+				      struct i915_power_well *power_well)
+{
+	/*
+	 * Not the correctly implementation but there is no way to just read it
+	 * from PCODE, so returning count to avoid state mismatch errors
+	 */
+	return power_well->count;
+}
+
+static const struct i915_power_well_ops tgl_tc_cold_off_ops = {
+	.sync_hw = tgl_tc_cold_off_power_well_sync_hw,
+	.enable = tgl_tc_cold_off_power_well_enable,
+	.disable = tgl_tc_cold_off_power_well_disable,
+	.is_enabled = tgl_tc_cold_off_power_well_is_enabled,
 };
 
 static const struct i915_power_well_desc tgl_power_wells[] = {
@@ -3942,7 +3990,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 		.name = "power well 3",
 		.domains = TGL_PW_3_POWER_DOMAINS,
 		.ops = &hsw_power_well_ops,
-		.id = TGL_DISP_PW_3,
+		.id = ICL_DISP_PW_3,
 		{
 			.hsw.regs = &hsw_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_PW_3,
@@ -4044,7 +4092,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX A",
 		.domains = TGL_AUX_A_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4054,7 +4102,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX B",
 		.domains = TGL_AUX_B_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4064,7 +4112,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX C",
 		.domains = TGL_AUX_C_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4074,7 +4122,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX D TC1",
 		.domains = TGL_AUX_D_TC1_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4085,7 +4133,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX E TC2",
 		.domains = TGL_AUX_E_TC2_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4096,7 +4144,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX F TC3",
 		.domains = TGL_AUX_F_TC3_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4107,7 +4155,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX G TC4",
 		.domains = TGL_AUX_G_TC4_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4118,7 +4166,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX H TC5",
 		.domains = TGL_AUX_H_TC5_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4129,7 +4177,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX I TC6",
 		.domains = TGL_AUX_I_TC6_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4140,7 +4188,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX D TBT1",
 		.domains = TGL_AUX_D_TBT1_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4151,7 +4199,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX E TBT2",
 		.domains = TGL_AUX_E_TBT2_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4162,7 +4210,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX F TBT3",
 		.domains = TGL_AUX_F_TBT3_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4173,7 +4221,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX G TBT4",
 		.domains = TGL_AUX_G_TBT4_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4184,7 +4232,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX H TBT5",
 		.domains = TGL_AUX_H_TBT5_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4195,7 +4243,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 	{
 		.name = "AUX I TBT6",
 		.domains = TGL_AUX_I_TBT6_IO_POWER_DOMAINS,
-		.ops = &icl_tc_phy_aux_power_well_ops,
+		.ops = &icl_aux_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
@@ -4227,6 +4275,12 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 			.hsw.irq_pipe_mask = BIT(PIPE_D),
 		},
 	},
+	{
+		.name = "TC cold off",
+		.domains = TGL_TC_COLD_OFF_POWER_DOMAINS,
+		.ops = &tgl_tc_cold_off_ops,
+		.id = DISP_PW_ID_NONE,
+	},
 };
 
 static int
@@ -4376,8 +4430,6 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
 	 */
 	if (IS_GEN(dev_priv, 12)) {
 		err = set_power_wells(power_domains, tgl_power_wells);
-	} else if (IS_ELKHARTLAKE(dev_priv)) {
-		err = set_power_wells(power_domains, ehl_power_wells);
 	} else if (IS_GEN(dev_priv, 11)) {
 		err = set_power_wells(power_domains, icl_power_wells);
 	} else if (IS_CANNONLAKE(dev_priv)) {
@@ -4439,9 +4491,8 @@ static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
 	mutex_unlock(&power_domains->lock);
 }
 
-static inline
-bool intel_dbuf_slice_set(struct drm_i915_private *dev_priv,
-			  i915_reg_t reg, bool enable)
+static bool intel_dbuf_slice_set(struct drm_i915_private *dev_priv,
+				 i915_reg_t reg, bool enable)
 {
 	u32 val, status;
 
@@ -4480,7 +4531,8 @@ void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
 	drm_WARN(&dev_priv->drm, hweight8(req_slices) > max_slices,
 		 "Invalid number of dbuf slices requested\n");
 
-	DRM_DEBUG_KMS("Updating dbuf slices to 0x%x\n", req_slices);
+	drm_dbg_kms(&dev_priv->drm, "Updating dbuf slices to 0x%x\n",
+		    req_slices);
 
 	/*
 	 * Might be running this in parallel to gen9_dc_off_power_well_enable
@@ -5016,7 +5068,7 @@ static void tgl_bw_buddy_init(struct drm_i915_private *dev_priv)
 	const struct buddy_page_mask *table;
 	int i;
 
-	if (IS_TGL_REVID(dev_priv, TGL_REVID_A0, TGL_REVID_A0))
+	if (IS_TGL_REVID(dev_priv, TGL_REVID_A0, TGL_REVID_B0))
 		/* Wa_1409767108: tgl */
 		table = wa_1409767108_buddy_page_masks;
 	else
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.h b/drivers/gpu/drm/i915/display/intel_display_power.h
index da64a5edae7a..6c917699293b 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.h
+++ b/drivers/gpu/drm/i915/display/intel_display_power.h
@@ -76,6 +76,7 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_MODESET,
 	POWER_DOMAIN_GT_IRQ,
 	POWER_DOMAIN_DPLL_DC_OFF,
+	POWER_DOMAIN_TC_COLD_OFF,
 	POWER_DOMAIN_INIT,
 
 	POWER_DOMAIN_NUM,
@@ -100,7 +101,7 @@ enum i915_power_well_id {
 	SKL_DISP_PW_MISC_IO,
 	SKL_DISP_PW_1,
 	SKL_DISP_PW_2,
-	TGL_DISP_PW_3,
+	ICL_DISP_PW_3,
 	SKL_DISP_DC_OFF,
 };
 
@@ -266,6 +267,8 @@ intel_display_power_domain_str(enum intel_display_power_domain domain);
 
 bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
 				    enum intel_display_power_domain domain);
+bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
+					 enum i915_power_well_id power_well_id);
 bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
 				      enum intel_display_power_domain domain);
 intel_wakeref_t intel_display_power_get(struct drm_i915_private *dev_priv,
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 5e00e611f077..9488449e4b94 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -132,8 +132,7 @@ struct intel_encoder {
 	u16 cloneable;
 	u8 pipe_mask;
 	enum intel_hotplug_state (*hotplug)(struct intel_encoder *encoder,
-					    struct intel_connector *connector,
-					    bool irq_received);
+					    struct intel_connector *connector);
 	enum intel_output_type (*compute_output_type)(struct intel_encoder *,
 						      struct intel_crtc_state *,
 						      struct drm_connector_state *);
@@ -146,28 +145,35 @@ struct intel_encoder {
 	void (*update_prepare)(struct intel_atomic_state *,
 			       struct intel_encoder *,
 			       struct intel_crtc *);
-	void (*pre_pll_enable)(struct intel_encoder *,
+	void (*pre_pll_enable)(struct intel_atomic_state *,
+			       struct intel_encoder *,
 			       const struct intel_crtc_state *,
 			       const struct drm_connector_state *);
-	void (*pre_enable)(struct intel_encoder *,
+	void (*pre_enable)(struct intel_atomic_state *,
+			   struct intel_encoder *,
 			   const struct intel_crtc_state *,
 			   const struct drm_connector_state *);
-	void (*enable)(struct intel_encoder *,
+	void (*enable)(struct intel_atomic_state *,
+		       struct intel_encoder *,
 		       const struct intel_crtc_state *,
 		       const struct drm_connector_state *);
 	void (*update_complete)(struct intel_atomic_state *,
 				struct intel_encoder *,
 				struct intel_crtc *);
-	void (*disable)(struct intel_encoder *,
+	void (*disable)(struct intel_atomic_state *,
+			struct intel_encoder *,
 			const struct intel_crtc_state *,
 			const struct drm_connector_state *);
-	void (*post_disable)(struct intel_encoder *,
+	void (*post_disable)(struct intel_atomic_state *,
+			     struct intel_encoder *,
 			     const struct intel_crtc_state *,
 			     const struct drm_connector_state *);
-	void (*post_pll_disable)(struct intel_encoder *,
+	void (*post_pll_disable)(struct intel_atomic_state *,
+				 struct intel_encoder *,
 				 const struct intel_crtc_state *,
 				 const struct drm_connector_state *);
-	void (*update_pipe)(struct intel_encoder *,
+	void (*update_pipe)(struct intel_atomic_state *,
+			    struct intel_encoder *,
 			    const struct intel_crtc_state *,
 			    const struct drm_connector_state *);
 	/* Read out the current hw state of this connector, returning true if
@@ -425,11 +431,14 @@ struct intel_connector {
 	struct edid *edid;
 	struct edid *detect_edid;
 
+	/* Number of times hotplug detection was tried after an HPD interrupt */
+	int hotplug_retries;
+
 	/* since POLL and HPD connectors may use the same HPD line keep the native
 	   state of connector->polled in case hotplug storm detection changes it */
 	u8 polled;
 
-	void *port; /* store this opaque as its illegal to dereference it */
+	struct drm_dp_mst_port *port;
 
 	struct intel_dp *mst_port;
 
@@ -640,6 +649,16 @@ struct intel_crtc_scaler_state {
 #define I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP (1<<1)
 /* Flag to use the scanline counter instead of the pixel counter */
 #define I915_MODE_FLAG_USE_SCANLINE_COUNTER (1<<2)
+/*
+ * TE0 or TE1 flag is set if the crtc has a DSI encoder which
+ * is operating in command mode.
+ * Flag to use TE from DSI0 instead of VBI in command mode
+ */
+#define I915_MODE_FLAG_DSI_USE_TE0 (1<<3)
+/* Flag to use TE from DSI1 instead of VBI in command mode */
+#define I915_MODE_FLAG_DSI_USE_TE1 (1<<4)
+/* Flag to indicate mipi dsi periodic command mode where we do not get TE */
+#define I915_MODE_FLAG_DSI_PERIODIC_CMD_MODE (1<<5)
 
 struct intel_wm_level {
 	bool enable;
@@ -955,8 +974,7 @@ struct intel_crtc_state {
 
 	/* Panel fitter placement and size for Ironlake+ */
 	struct {
-		u32 pos;
-		u32 size;
+		struct drm_rect dst;
 		bool enabled;
 		bool force_thru;
 	} pch_pfit;
@@ -1015,6 +1033,7 @@ struct intel_crtc_state {
 		union hdmi_infoframe spd;
 		union hdmi_infoframe hdmi;
 		union hdmi_infoframe drm;
+		struct drm_dp_vsc_sdp vsc;
 	} infoframes;
 
 	/* HDMI scrambling status */
@@ -1238,6 +1257,7 @@ struct intel_dp_compliance_data {
 	u8 video_pattern;
 	u16 hdisplay, vdisplay;
 	u8 bpc;
+	struct drm_dp_phy_test_params phytest;
 };
 
 struct intel_dp_compliance {
@@ -1347,6 +1367,9 @@ struct intel_dp {
 
 	/* This is called before a link training is starterd */
 	void (*prepare_link_retrain)(struct intel_dp *intel_dp);
+	void (*set_link_train)(struct intel_dp *intel_dp, u8 dp_train_pat);
+	void (*set_idle_link_train)(struct intel_dp *intel_dp);
+	void (*set_signal_levels)(struct intel_dp *intel_dp);
 
 	/* Displayport compliance testing */
 	struct intel_dp_compliance compliance;
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index a2fafd4499f2..6952b0295096 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -48,7 +48,6 @@
 #include "intel_audio.h"
 #include "intel_connector.h"
 #include "intel_ddi.h"
-#include "intel_display_debugfs.h"
 #include "intel_display_types.h"
 #include "intel_dp.h"
 #include "intel_dp_link_training.h"
@@ -164,6 +163,17 @@ static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
 	};
 	int i, max_rate;
 
+	if (drm_dp_has_quirk(&intel_dp->desc, 0,
+			     DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS)) {
+		/* Needed, e.g., for Apple MBP 2017, 15 inch eDP Retina panel */
+		static const int quirk_rates[] = { 162000, 270000, 324000 };
+
+		memcpy(intel_dp->sink_rates, quirk_rates, sizeof(quirk_rates));
+		intel_dp->num_sink_rates = ARRAY_SIZE(quirk_rates);
+
+		return;
+	}
+
 	max_rate = drm_dp_bw_code_to_link_rate(intel_dp->dpcd[DP_MAX_LINK_RATE]);
 
 	for (i = 0; i < ARRAY_SIZE(dp_rates); i++) {
@@ -452,6 +462,7 @@ static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp,
 int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
 					    int link_rate, u8 lane_count)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	int index;
 
 	index = intel_dp_rate_index(intel_dp->common_rates,
@@ -462,7 +473,8 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
 		    !intel_dp_can_link_train_fallback_for_edp(intel_dp,
 							      intel_dp->common_rates[index - 1],
 							      lane_count)) {
-			DRM_DEBUG_KMS("Retrying Link training for eDP with same parameters\n");
+			drm_dbg_kms(&i915->drm,
+				    "Retrying Link training for eDP with same parameters\n");
 			return 0;
 		}
 		intel_dp->max_link_rate = intel_dp->common_rates[index - 1];
@@ -472,13 +484,14 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
 		    !intel_dp_can_link_train_fallback_for_edp(intel_dp,
 							      intel_dp_max_common_rate(intel_dp),
 							      lane_count >> 1)) {
-			DRM_DEBUG_KMS("Retrying Link training for eDP with same parameters\n");
+			drm_dbg_kms(&i915->drm,
+				    "Retrying Link training for eDP with same parameters\n");
 			return 0;
 		}
 		intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
 		intel_dp->max_link_lane_count = lane_count >> 1;
 	} else {
-		DRM_ERROR("Link Training Unsuccessful\n");
+		drm_err(&i915->drm, "Link Training Unsuccessful\n");
 		return -1;
 	}
 
@@ -553,6 +566,7 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
 static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
 				       int mode_clock, int mode_hdisplay)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 min_slice_count, i;
 	int max_slice_width;
 
@@ -565,8 +579,9 @@ static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
 
 	max_slice_width = drm_dp_dsc_sink_max_slice_width(intel_dp->dsc_dpcd);
 	if (max_slice_width < DP_DSC_MIN_SLICE_WIDTH_VALUE) {
-		DRM_DEBUG_KMS("Unsupported slice width %d by DP DSC Sink device\n",
-			      max_slice_width);
+		drm_dbg_kms(&i915->drm,
+			    "Unsupported slice width %d by DP DSC Sink device\n",
+			    max_slice_width);
 		return 0;
 	}
 	/* Also take into account max slice width */
@@ -584,7 +599,8 @@ static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
 			return valid_dsc_slicecount[i];
 	}
 
-	DRM_DEBUG_KMS("Unsupported Slice Count %d\n", min_slice_count);
+	drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n",
+		    min_slice_count);
 	return 0;
 }
 
@@ -1832,6 +1848,7 @@ static void snprintf_int_array(char *str, size_t len,
 
 static void intel_dp_print_rates(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	char str[128]; /* FIXME: too big for stack? */
 
 	if (!drm_debug_enabled(DRM_UT_KMS))
@@ -1839,15 +1856,15 @@ static void intel_dp_print_rates(struct intel_dp *intel_dp)
 
 	snprintf_int_array(str, sizeof(str),
 			   intel_dp->source_rates, intel_dp->num_source_rates);
-	DRM_DEBUG_KMS("source rates: %s\n", str);
+	drm_dbg_kms(&i915->drm, "source rates: %s\n", str);
 
 	snprintf_int_array(str, sizeof(str),
 			   intel_dp->sink_rates, intel_dp->num_sink_rates);
-	DRM_DEBUG_KMS("sink rates: %s\n", str);
+	drm_dbg_kms(&i915->drm, "sink rates: %s\n", str);
 
 	snprintf_int_array(str, sizeof(str),
 			   intel_dp->common_rates, intel_dp->num_common_rates);
-	DRM_DEBUG_KMS("common rates: %s\n", str);
+	drm_dbg_kms(&i915->drm, "common rates: %s\n", str);
 }
 
 int
@@ -1954,6 +1971,8 @@ intel_dp_adjust_compliance_config(struct intel_dp *intel_dp,
 				  struct intel_crtc_state *pipe_config,
 				  struct link_config_limits *limits)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+
 	/* For DP Compliance we override the computed bpp for the pipe */
 	if (intel_dp->compliance.test_data.bpc != 0) {
 		int bpp = 3 * intel_dp->compliance.test_data.bpc;
@@ -1961,7 +1980,7 @@ intel_dp_adjust_compliance_config(struct intel_dp *intel_dp,
 		limits->min_bpp = limits->max_bpp = bpp;
 		pipe_config->dither_force_disable = bpp == 6 * 3;
 
-		DRM_DEBUG_KMS("Setting pipe_bpp to %d\n", bpp);
+		drm_dbg_kms(&i915->drm, "Setting pipe_bpp to %d\n", bpp);
 	}
 
 	/* Use values requested by Compliance Test Request */
@@ -2055,6 +2074,7 @@ static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc)
 static int intel_dp_dsc_compute_params(struct intel_encoder *encoder,
 				       struct intel_crtc_state *crtc_state)
 {
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 	struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
 	u8 line_buf_depth;
@@ -2089,7 +2109,8 @@ static int intel_dp_dsc_compute_params(struct intel_encoder *encoder,
 
 	line_buf_depth = drm_dp_dsc_sink_line_buf_depth(intel_dp->dsc_dpcd);
 	if (!line_buf_depth) {
-		DRM_DEBUG_KMS("DSC Sink Line Buffer Depth invalid\n");
+		drm_dbg_kms(&i915->drm,
+			    "DSC Sink Line Buffer Depth invalid\n");
 		return -EINVAL;
 	}
 
@@ -2114,7 +2135,8 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 {
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
-	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
+	const struct drm_display_mode *adjusted_mode =
+		&pipe_config->hw.adjusted_mode;
 	u8 dsc_max_bpc;
 	int pipe_bpp;
 	int ret;
@@ -2229,7 +2251,9 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
 			     struct intel_crtc_state *pipe_config,
 			     struct drm_connector_state *conn_state)
 {
-	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+	const struct drm_display_mode *adjusted_mode =
+		&pipe_config->hw.adjusted_mode;
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 	struct link_config_limits limits;
 	int common_len;
@@ -2264,11 +2288,11 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
 
 	intel_dp_adjust_compliance_config(intel_dp, pipe_config, &limits);
 
-	DRM_DEBUG_KMS("DP link computation with max lane count %i "
-		      "max rate %d max bpp %d pixel clock %iKHz\n",
-		      limits.max_lane_count,
-		      intel_dp->common_rates[limits.max_clock],
-		      limits.max_bpp, adjusted_mode->crtc_clock);
+	drm_dbg_kms(&i915->drm, "DP link computation with max lane count %i "
+		    "max rate %d max bpp %d pixel clock %iKHz\n",
+		    limits.max_lane_count,
+		    intel_dp->common_rates[limits.max_clock],
+		    limits.max_bpp, adjusted_mode->crtc_clock);
 
 	/*
 	 * Optimize for slow and wide. This is the place to add alternative
@@ -2277,7 +2301,7 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
 	ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, &limits);
 
 	/* enable compression if the mode doesn't fit available BW */
-	DRM_DEBUG_KMS("Force DSC en = %d\n", intel_dp->force_dsc_en);
+	drm_dbg_kms(&i915->drm, "Force DSC en = %d\n", intel_dp->force_dsc_en);
 	if (ret || intel_dp->force_dsc_en) {
 		ret = intel_dp_dsc_compute_config(intel_dp, pipe_config,
 						  conn_state, &limits);
@@ -2286,40 +2310,42 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
 	}
 
 	if (pipe_config->dsc.compression_enable) {
-		DRM_DEBUG_KMS("DP lane count %d clock %d Input bpp %d Compressed bpp %d\n",
-			      pipe_config->lane_count, pipe_config->port_clock,
-			      pipe_config->pipe_bpp,
-			      pipe_config->dsc.compressed_bpp);
-
-		DRM_DEBUG_KMS("DP link rate required %i available %i\n",
-			      intel_dp_link_required(adjusted_mode->crtc_clock,
-						     pipe_config->dsc.compressed_bpp),
-			      intel_dp_max_data_rate(pipe_config->port_clock,
-						     pipe_config->lane_count));
+		drm_dbg_kms(&i915->drm,
+			    "DP lane count %d clock %d Input bpp %d Compressed bpp %d\n",
+			    pipe_config->lane_count, pipe_config->port_clock,
+			    pipe_config->pipe_bpp,
+			    pipe_config->dsc.compressed_bpp);
+
+		drm_dbg_kms(&i915->drm,
+			    "DP link rate required %i available %i\n",
+			    intel_dp_link_required(adjusted_mode->crtc_clock,
+						   pipe_config->dsc.compressed_bpp),
+			    intel_dp_max_data_rate(pipe_config->port_clock,
+						   pipe_config->lane_count));
 	} else {
-		DRM_DEBUG_KMS("DP lane count %d clock %d bpp %d\n",
-			      pipe_config->lane_count, pipe_config->port_clock,
-			      pipe_config->pipe_bpp);
+		drm_dbg_kms(&i915->drm, "DP lane count %d clock %d bpp %d\n",
+			    pipe_config->lane_count, pipe_config->port_clock,
+			    pipe_config->pipe_bpp);
 
-		DRM_DEBUG_KMS("DP link rate required %i available %i\n",
-			      intel_dp_link_required(adjusted_mode->crtc_clock,
-						     pipe_config->pipe_bpp),
-			      intel_dp_max_data_rate(pipe_config->port_clock,
-						     pipe_config->lane_count));
+		drm_dbg_kms(&i915->drm,
+			    "DP link rate required %i available %i\n",
+			    intel_dp_link_required(adjusted_mode->crtc_clock,
+						   pipe_config->pipe_bpp),
+			    intel_dp_max_data_rate(pipe_config->port_clock,
+						   pipe_config->lane_count));
 	}
 	return 0;
 }
 
 static int
 intel_dp_ycbcr420_config(struct intel_dp *intel_dp,
-			 struct drm_connector *connector,
-			 struct intel_crtc_state *crtc_state)
+			 struct intel_crtc_state *crtc_state,
+			 const struct drm_connector_state *conn_state)
 {
+	struct drm_connector *connector = conn_state->connector;
 	const struct drm_display_info *info = &connector->display_info;
 	const struct drm_display_mode *adjusted_mode =
 		&crtc_state->hw.adjusted_mode;
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
-	int ret;
 
 	if (!drm_mode_is_420_only(info, adjusted_mode) ||
 	    !intel_dp_get_colorimetry_status(intel_dp) ||
@@ -2328,16 +2354,7 @@ intel_dp_ycbcr420_config(struct intel_dp *intel_dp,
 
 	crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
 
-	/* YCBCR 420 output conversion needs a scaler */
-	ret = skl_update_scaler_crtc(crtc_state);
-	if (ret) {
-		DRM_DEBUG_KMS("Scaler allocation for output failed\n");
-		return ret;
-	}
-
-	intel_pch_panel_fitting(crtc, crtc_state, DRM_MODE_SCALE_FULLSCREEN);
-
-	return 0;
+	return intel_pch_panel_fitting(crtc_state, conn_state);
 }
 
 bool intel_dp_limited_color_range(const struct intel_crtc_state *crtc_state,
@@ -2384,6 +2401,128 @@ static bool intel_dp_port_has_audio(struct drm_i915_private *dev_priv,
 	return true;
 }
 
+static void intel_dp_compute_vsc_colorimetry(const struct intel_crtc_state *crtc_state,
+					     const struct drm_connector_state *conn_state,
+					     struct drm_dp_vsc_sdp *vsc)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+
+	/*
+	 * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118
+	 * VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/
+	 * Colorimetry Format indication.
+	 */
+	vsc->revision = 0x5;
+	vsc->length = 0x13;
+
+	/* DP 1.4a spec, Table 2-120 */
+	switch (crtc_state->output_format) {
+	case INTEL_OUTPUT_FORMAT_YCBCR444:
+		vsc->pixelformat = DP_PIXELFORMAT_YUV444;
+		break;
+	case INTEL_OUTPUT_FORMAT_YCBCR420:
+		vsc->pixelformat = DP_PIXELFORMAT_YUV420;
+		break;
+	case INTEL_OUTPUT_FORMAT_RGB:
+	default:
+		vsc->pixelformat = DP_PIXELFORMAT_RGB;
+	}
+
+	switch (conn_state->colorspace) {
+	case DRM_MODE_COLORIMETRY_BT709_YCC:
+		vsc->colorimetry = DP_COLORIMETRY_BT709_YCC;
+		break;
+	case DRM_MODE_COLORIMETRY_XVYCC_601:
+		vsc->colorimetry = DP_COLORIMETRY_XVYCC_601;
+		break;
+	case DRM_MODE_COLORIMETRY_XVYCC_709:
+		vsc->colorimetry = DP_COLORIMETRY_XVYCC_709;
+		break;
+	case DRM_MODE_COLORIMETRY_SYCC_601:
+		vsc->colorimetry = DP_COLORIMETRY_SYCC_601;
+		break;
+	case DRM_MODE_COLORIMETRY_OPYCC_601:
+		vsc->colorimetry = DP_COLORIMETRY_OPYCC_601;
+		break;
+	case DRM_MODE_COLORIMETRY_BT2020_CYCC:
+		vsc->colorimetry = DP_COLORIMETRY_BT2020_CYCC;
+		break;
+	case DRM_MODE_COLORIMETRY_BT2020_RGB:
+		vsc->colorimetry = DP_COLORIMETRY_BT2020_RGB;
+		break;
+	case DRM_MODE_COLORIMETRY_BT2020_YCC:
+		vsc->colorimetry = DP_COLORIMETRY_BT2020_YCC;
+		break;
+	case DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65:
+	case DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER:
+		vsc->colorimetry = DP_COLORIMETRY_DCI_P3_RGB;
+		break;
+	default:
+		/*
+		 * RGB->YCBCR color conversion uses the BT.709
+		 * color space.
+		 */
+		if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
+			vsc->colorimetry = DP_COLORIMETRY_BT709_YCC;
+		else
+			vsc->colorimetry = DP_COLORIMETRY_DEFAULT;
+		break;
+	}
+
+	vsc->bpc = crtc_state->pipe_bpp / 3;
+
+	/* only RGB pixelformat supports 6 bpc */
+	drm_WARN_ON(&dev_priv->drm,
+		    vsc->bpc == 6 && vsc->pixelformat != DP_PIXELFORMAT_RGB);
+
+	/* all YCbCr are always limited range */
+	vsc->dynamic_range = DP_DYNAMIC_RANGE_CTA;
+	vsc->content_type = DP_CONTENT_TYPE_NOT_DEFINED;
+}
+
+static void intel_dp_compute_vsc_sdp(struct intel_dp *intel_dp,
+				     struct intel_crtc_state *crtc_state,
+				     const struct drm_connector_state *conn_state)
+{
+	struct drm_dp_vsc_sdp *vsc = &crtc_state->infoframes.vsc;
+
+	/* When PSR is enabled, VSC SDP is handled by PSR routine */
+	if (intel_psr_enabled(intel_dp))
+		return;
+
+	if (!intel_dp_needs_vsc_sdp(crtc_state, conn_state))
+		return;
+
+	crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC);
+	vsc->sdp_type = DP_SDP_VSC;
+	intel_dp_compute_vsc_colorimetry(crtc_state, conn_state,
+					 &crtc_state->infoframes.vsc);
+}
+
+static void
+intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp,
+					    struct intel_crtc_state *crtc_state,
+					    const struct drm_connector_state *conn_state)
+{
+	int ret;
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	struct hdmi_drm_infoframe *drm_infoframe = &crtc_state->infoframes.drm.drm;
+
+	if (!conn_state->hdr_output_metadata)
+		return;
+
+	ret = drm_hdmi_infoframe_set_hdr_metadata(drm_infoframe, conn_state);
+
+	if (ret) {
+		drm_dbg_kms(&dev_priv->drm, "couldn't set HDR metadata in infoframe\n");
+		return;
+	}
+
+	crtc_state->infoframes.enable |=
+		intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA);
+}
+
 int
 intel_dp_compute_config(struct intel_encoder *encoder,
 			struct intel_crtc_state *pipe_config,
@@ -2394,7 +2533,6 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 	struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
 	enum port port = encoder->port;
-	struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->uapi.crtc);
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
 	struct intel_digital_connector_state *intel_conn_state =
 		to_intel_digital_connector_state(conn_state);
@@ -2410,9 +2548,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	if (lspcon->active)
 		lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
 	else
-		ret = intel_dp_ycbcr420_config(intel_dp, &intel_connector->base,
-					       pipe_config);
-
+		ret = intel_dp_ycbcr420_config(intel_dp, pipe_config,
+					       conn_state);
 	if (ret)
 		return ret;
 
@@ -2428,18 +2565,12 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 		intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
 				       adjusted_mode);
 
-		if (INTEL_GEN(dev_priv) >= 9) {
-			ret = skl_update_scaler_crtc(pipe_config);
-			if (ret)
-				return ret;
-		}
-
 		if (HAS_GMCH(dev_priv))
-			intel_gmch_panel_fitting(intel_crtc, pipe_config,
-						 conn_state->scaling_mode);
+			ret = intel_gmch_panel_fitting(pipe_config, conn_state);
 		else
-			intel_pch_panel_fitting(intel_crtc, pipe_config,
-						conn_state->scaling_mode);
+			ret = intel_pch_panel_fitting(pipe_config, conn_state);
+		if (ret)
+			return ret;
 	}
 
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
@@ -2489,6 +2620,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 		intel_dp_set_clock(encoder, pipe_config);
 
 	intel_psr_compute_config(intel_dp, pipe_config);
+	intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state);
+	intel_dp_compute_hdr_metadata_infoframe_sdp(intel_dp, pipe_config, conn_state);
 
 	return 0;
 }
@@ -2630,22 +2763,27 @@ static void wait_panel_status(struct intel_dp *intel_dp,
 
 static void wait_panel_on(struct intel_dp *intel_dp)
 {
-	DRM_DEBUG_KMS("Wait for panel power on\n");
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+
+	drm_dbg_kms(&i915->drm, "Wait for panel power on\n");
 	wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE);
 }
 
 static void wait_panel_off(struct intel_dp *intel_dp)
 {
-	DRM_DEBUG_KMS("Wait for panel power off time\n");
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+
+	drm_dbg_kms(&i915->drm, "Wait for panel power off time\n");
 	wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE);
 }
 
 static void wait_panel_power_cycle(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	ktime_t panel_power_on_time;
 	s64 panel_power_off_duration;
 
-	DRM_DEBUG_KMS("Wait for panel power cycle\n");
+	drm_dbg_kms(&i915->drm, "Wait for panel power cycle\n");
 
 	/* take the difference of currrent time and panel power off time
 	 * and then make panel wait for t11_t12 if needed. */
@@ -3009,11 +3147,12 @@ void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state,
 			    const struct drm_connector_state *conn_state)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(conn_state->best_encoder));
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 
 	if (!intel_dp_is_edp(intel_dp))
 		return;
 
-	DRM_DEBUG_KMS("\n");
+	drm_dbg_kms(&i915->drm, "\n");
 
 	intel_panel_enable_backlight(crtc_state, conn_state);
 	_intel_edp_backlight_on(intel_dp);
@@ -3047,11 +3186,12 @@ static void _intel_edp_backlight_off(struct intel_dp *intel_dp)
 void intel_edp_backlight_off(const struct drm_connector_state *old_conn_state)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(old_conn_state->best_encoder));
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 
 	if (!intel_dp_is_edp(intel_dp))
 		return;
 
-	DRM_DEBUG_KMS("\n");
+	drm_dbg_kms(&i915->drm, "\n");
 
 	_intel_edp_backlight_off(intel_dp);
 	intel_panel_disable_backlight(old_conn_state);
@@ -3064,6 +3204,7 @@ void intel_edp_backlight_off(const struct drm_connector_state *old_conn_state)
 static void intel_edp_backlight_power(struct intel_connector *connector,
 				      bool enable)
 {
+	struct drm_i915_private *i915 = to_i915(connector->base.dev);
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
 	intel_wakeref_t wakeref;
 	bool is_enabled;
@@ -3074,8 +3215,8 @@ static void intel_edp_backlight_power(struct intel_connector *connector,
 	if (is_enabled == enable)
 		return;
 
-	DRM_DEBUG_KMS("panel power control backlight %s\n",
-		      enable ? "enable" : "disable");
+	drm_dbg_kms(&i915->drm, "panel power control backlight %s\n",
+		    enable ? "enable" : "disable");
 
 	if (enable)
 		_intel_edp_backlight_on(intel_dp);
@@ -3185,6 +3326,7 @@ void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
 					   const struct intel_crtc_state *crtc_state,
 					   bool enable)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	int ret;
 
 	if (!crtc_state->dsc.compression_enable)
@@ -3193,13 +3335,15 @@ void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
 	ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_DSC_ENABLE,
 				 enable ? DP_DECOMPRESSION_EN : 0);
 	if (ret < 0)
-		DRM_DEBUG_KMS("Failed to %s sink decompression state\n",
-			      enable ? "enable" : "disable");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to %s sink decompression state\n",
+			    enable ? "enable" : "disable");
 }
 
 /* If the sink supports it, try to set the power state appropriately */
 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	int ret, i;
 
 	/* Should have a valid DPCD by this point */
@@ -3232,8 +3376,8 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 	}
 
 	if (ret != 1)
-		DRM_DEBUG_KMS("failed to %s sink power state\n",
-			      mode == DRM_MODE_DPMS_ON ? "enable" : "disable");
+		drm_dbg_kms(&i915->drm, "failed to %s sink power state\n",
+			    mode == DRM_MODE_DPMS_ON ? "enable" : "disable");
 }
 
 static bool cpt_dp_port_selected(struct drm_i915_private *dev_priv,
@@ -3390,7 +3534,8 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 	}
 }
 
-static void intel_disable_dp(struct intel_encoder *encoder,
+static void intel_disable_dp(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
 			     const struct intel_crtc_state *old_crtc_state,
 			     const struct drm_connector_state *old_conn_state)
 {
@@ -3410,21 +3555,24 @@ static void intel_disable_dp(struct intel_encoder *encoder,
 	intel_edp_panel_off(intel_dp);
 }
 
-static void g4x_disable_dp(struct intel_encoder *encoder,
+static void g4x_disable_dp(struct intel_atomic_state *state,
+			   struct intel_encoder *encoder,
 			   const struct intel_crtc_state *old_crtc_state,
 			   const struct drm_connector_state *old_conn_state)
 {
-	intel_disable_dp(encoder, old_crtc_state, old_conn_state);
+	intel_disable_dp(state, encoder, old_crtc_state, old_conn_state);
 }
 
-static void vlv_disable_dp(struct intel_encoder *encoder,
+static void vlv_disable_dp(struct intel_atomic_state *state,
+			   struct intel_encoder *encoder,
 			   const struct intel_crtc_state *old_crtc_state,
 			   const struct drm_connector_state *old_conn_state)
 {
-	intel_disable_dp(encoder, old_crtc_state, old_conn_state);
+	intel_disable_dp(state, encoder, old_crtc_state, old_conn_state);
 }
 
-static void g4x_post_disable_dp(struct intel_encoder *encoder,
+static void g4x_post_disable_dp(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
 				const struct intel_crtc_state *old_crtc_state,
 				const struct drm_connector_state *old_conn_state)
 {
@@ -3444,14 +3592,16 @@ static void g4x_post_disable_dp(struct intel_encoder *encoder,
 		ilk_edp_pll_off(intel_dp, old_crtc_state);
 }
 
-static void vlv_post_disable_dp(struct intel_encoder *encoder,
+static void vlv_post_disable_dp(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
 				const struct intel_crtc_state *old_crtc_state,
 				const struct drm_connector_state *old_conn_state)
 {
 	intel_dp_link_down(encoder, old_crtc_state);
 }
 
-static void chv_post_disable_dp(struct intel_encoder *encoder,
+static void chv_post_disable_dp(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
 				const struct intel_crtc_state *old_crtc_state,
 				const struct drm_connector_state *old_conn_state)
 {
@@ -3468,90 +3618,63 @@ static void chv_post_disable_dp(struct intel_encoder *encoder,
 }
 
 static void
-_intel_dp_set_link_train(struct intel_dp *intel_dp,
-			 u32 *DP,
-			 u8 dp_train_pat)
+cpt_set_link_train(struct intel_dp *intel_dp,
+		   u8 dp_train_pat)
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	enum port port = intel_dig_port->base.port;
-	u8 train_pat_mask = drm_dp_training_pattern_mask(intel_dp->dpcd);
-
-	if (dp_train_pat & train_pat_mask)
-		drm_dbg_kms(&dev_priv->drm,
-			    "Using DP training pattern TPS%d\n",
-			    dp_train_pat & train_pat_mask);
-
-	if (HAS_DDI(dev_priv)) {
-		u32 temp = intel_de_read(dev_priv, intel_dp->regs.dp_tp_ctl);
-
-		if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
-			temp |= DP_TP_CTL_SCRAMBLE_DISABLE;
-		else
-			temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE;
+	u32 *DP = &intel_dp->DP;
 
-		temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
-		switch (dp_train_pat & train_pat_mask) {
-		case DP_TRAINING_PATTERN_DISABLE:
-			temp |= DP_TP_CTL_LINK_TRAIN_NORMAL;
+	*DP &= ~DP_LINK_TRAIN_MASK_CPT;
 
-			break;
-		case DP_TRAINING_PATTERN_1:
-			temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
-			break;
-		case DP_TRAINING_PATTERN_2:
-			temp |= DP_TP_CTL_LINK_TRAIN_PAT2;
-			break;
-		case DP_TRAINING_PATTERN_3:
-			temp |= DP_TP_CTL_LINK_TRAIN_PAT3;
-			break;
-		case DP_TRAINING_PATTERN_4:
-			temp |= DP_TP_CTL_LINK_TRAIN_PAT4;
-			break;
-		}
-		intel_de_write(dev_priv, intel_dp->regs.dp_tp_ctl, temp);
+	switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
+	case DP_TRAINING_PATTERN_DISABLE:
+		*DP |= DP_LINK_TRAIN_OFF_CPT;
+		break;
+	case DP_TRAINING_PATTERN_1:
+		*DP |= DP_LINK_TRAIN_PAT_1_CPT;
+		break;
+	case DP_TRAINING_PATTERN_2:
+		*DP |= DP_LINK_TRAIN_PAT_2_CPT;
+		break;
+	case DP_TRAINING_PATTERN_3:
+		drm_dbg_kms(&dev_priv->drm,
+			    "TPS3 not supported, using TPS2 instead\n");
+		*DP |= DP_LINK_TRAIN_PAT_2_CPT;
+		break;
+	}
 
-	} else if ((IS_IVYBRIDGE(dev_priv) && port == PORT_A) ||
-		   (HAS_PCH_CPT(dev_priv) && port != PORT_A)) {
-		*DP &= ~DP_LINK_TRAIN_MASK_CPT;
+	intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP);
+	intel_de_posting_read(dev_priv, intel_dp->output_reg);
+}
 
-		switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
-		case DP_TRAINING_PATTERN_DISABLE:
-			*DP |= DP_LINK_TRAIN_OFF_CPT;
-			break;
-		case DP_TRAINING_PATTERN_1:
-			*DP |= DP_LINK_TRAIN_PAT_1_CPT;
-			break;
-		case DP_TRAINING_PATTERN_2:
-			*DP |= DP_LINK_TRAIN_PAT_2_CPT;
-			break;
-		case DP_TRAINING_PATTERN_3:
-			drm_dbg_kms(&dev_priv->drm,
-				    "TPS3 not supported, using TPS2 instead\n");
-			*DP |= DP_LINK_TRAIN_PAT_2_CPT;
-			break;
-		}
+static void
+g4x_set_link_train(struct intel_dp *intel_dp,
+		   u8 dp_train_pat)
+{
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	u32 *DP = &intel_dp->DP;
 
-	} else {
-		*DP &= ~DP_LINK_TRAIN_MASK;
+	*DP &= ~DP_LINK_TRAIN_MASK;
 
-		switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
-		case DP_TRAINING_PATTERN_DISABLE:
-			*DP |= DP_LINK_TRAIN_OFF;
-			break;
-		case DP_TRAINING_PATTERN_1:
-			*DP |= DP_LINK_TRAIN_PAT_1;
-			break;
-		case DP_TRAINING_PATTERN_2:
-			*DP |= DP_LINK_TRAIN_PAT_2;
-			break;
-		case DP_TRAINING_PATTERN_3:
-			drm_dbg_kms(&dev_priv->drm,
-				    "TPS3 not supported, using TPS2 instead\n");
-			*DP |= DP_LINK_TRAIN_PAT_2;
-			break;
-		}
+	switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
+	case DP_TRAINING_PATTERN_DISABLE:
+		*DP |= DP_LINK_TRAIN_OFF;
+		break;
+	case DP_TRAINING_PATTERN_1:
+		*DP |= DP_LINK_TRAIN_PAT_1;
+		break;
+	case DP_TRAINING_PATTERN_2:
+		*DP |= DP_LINK_TRAIN_PAT_2;
+		break;
+	case DP_TRAINING_PATTERN_3:
+		drm_dbg_kms(&dev_priv->drm,
+			    "TPS3 not supported, using TPS2 instead\n");
+		*DP |= DP_LINK_TRAIN_PAT_2;
+		break;
 	}
+
+	intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP);
+	intel_de_posting_read(dev_priv, intel_dp->output_reg);
 }
 
 static void intel_dp_enable_port(struct intel_dp *intel_dp,
@@ -3577,7 +3700,8 @@ static void intel_dp_enable_port(struct intel_dp *intel_dp,
 	intel_de_posting_read(dev_priv, intel_dp->output_reg);
 }
 
-static void intel_enable_dp(struct intel_encoder *encoder,
+static void intel_enable_dp(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
 			    const struct intel_crtc_state *pipe_config,
 			    const struct drm_connector_state *conn_state)
 {
@@ -3623,22 +3747,25 @@ static void intel_enable_dp(struct intel_encoder *encoder,
 	}
 }
 
-static void g4x_enable_dp(struct intel_encoder *encoder,
+static void g4x_enable_dp(struct intel_atomic_state *state,
+			  struct intel_encoder *encoder,
 			  const struct intel_crtc_state *pipe_config,
 			  const struct drm_connector_state *conn_state)
 {
-	intel_enable_dp(encoder, pipe_config, conn_state);
+	intel_enable_dp(state, encoder, pipe_config, conn_state);
 	intel_edp_backlight_on(pipe_config, conn_state);
 }
 
-static void vlv_enable_dp(struct intel_encoder *encoder,
+static void vlv_enable_dp(struct intel_atomic_state *state,
+			  struct intel_encoder *encoder,
 			  const struct intel_crtc_state *pipe_config,
 			  const struct drm_connector_state *conn_state)
 {
 	intel_edp_backlight_on(pipe_config, conn_state);
 }
 
-static void g4x_pre_enable_dp(struct intel_encoder *encoder,
+static void g4x_pre_enable_dp(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *pipe_config,
 			      const struct drm_connector_state *conn_state)
 {
@@ -3758,16 +3885,18 @@ static void vlv_init_panel_power_sequencer(struct intel_encoder *encoder,
 	intel_dp_init_panel_power_sequencer_registers(intel_dp, true);
 }
 
-static void vlv_pre_enable_dp(struct intel_encoder *encoder,
+static void vlv_pre_enable_dp(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *pipe_config,
 			      const struct drm_connector_state *conn_state)
 {
 	vlv_phy_pre_encoder_enable(encoder, pipe_config);
 
-	intel_enable_dp(encoder, pipe_config, conn_state);
+	intel_enable_dp(state, encoder, pipe_config, conn_state);
 }
 
-static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder,
+static void vlv_dp_pre_pll_enable(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *pipe_config,
 				  const struct drm_connector_state *conn_state)
 {
@@ -3776,19 +3905,21 @@ static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder,
 	vlv_phy_pre_pll_enable(encoder, pipe_config);
 }
 
-static void chv_pre_enable_dp(struct intel_encoder *encoder,
+static void chv_pre_enable_dp(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *pipe_config,
 			      const struct drm_connector_state *conn_state)
 {
 	chv_phy_pre_encoder_enable(encoder, pipe_config);
 
-	intel_enable_dp(encoder, pipe_config, conn_state);
+	intel_enable_dp(state, encoder, pipe_config, conn_state);
 
 	/* Second common lane will stay alive on its own now */
 	chv_phy_release_cl2_override(encoder);
 }
 
-static void chv_dp_pre_pll_enable(struct intel_encoder *encoder,
+static void chv_dp_pre_pll_enable(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *pipe_config,
 				  const struct drm_connector_state *conn_state)
 {
@@ -3797,7 +3928,8 @@ static void chv_dp_pre_pll_enable(struct intel_encoder *encoder,
 	chv_phy_pre_pll_enable(encoder, pipe_config);
 }
 
-static void chv_dp_post_pll_disable(struct intel_encoder *encoder,
+static void chv_dp_post_pll_disable(struct intel_atomic_state *state,
+				    struct intel_encoder *encoder,
 				    const struct intel_crtc_state *old_crtc_state,
 				    const struct drm_connector_state *old_conn_state)
 {
@@ -3881,7 +4013,7 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, u8 voltage_swing)
 	}
 }
 
-static u32 vlv_signal_levels(struct intel_dp *intel_dp)
+static void vlv_set_signal_levels(struct intel_dp *intel_dp)
 {
 	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
 	unsigned long demph_reg_value, preemph_reg_value,
@@ -3909,7 +4041,7 @@ static u32 vlv_signal_levels(struct intel_dp *intel_dp)
 			uniqtranscale_reg_value = 0x5598DA3A;
 			break;
 		default:
-			return 0;
+			return;
 		}
 		break;
 	case DP_TRAIN_PRE_EMPH_LEVEL_1:
@@ -3928,7 +4060,7 @@ static u32 vlv_signal_levels(struct intel_dp *intel_dp)
 			uniqtranscale_reg_value = 0x55ADDA3A;
 			break;
 		default:
-			return 0;
+			return;
 		}
 		break;
 	case DP_TRAIN_PRE_EMPH_LEVEL_2:
@@ -3943,7 +4075,7 @@ static u32 vlv_signal_levels(struct intel_dp *intel_dp)
 			uniqtranscale_reg_value = 0x55ADDA3A;
 			break;
 		default:
-			return 0;
+			return;
 		}
 		break;
 	case DP_TRAIN_PRE_EMPH_LEVEL_3:
@@ -3954,20 +4086,18 @@ static u32 vlv_signal_levels(struct intel_dp *intel_dp)
 			uniqtranscale_reg_value = 0x55ADDA3A;
 			break;
 		default:
-			return 0;
+			return;
 		}
 		break;
 	default:
-		return 0;
+		return;
 	}
 
 	vlv_set_phy_signal_level(encoder, demph_reg_value, preemph_reg_value,
 				 uniqtranscale_reg_value, 0);
-
-	return 0;
 }
 
-static u32 chv_signal_levels(struct intel_dp *intel_dp)
+static void chv_set_signal_levels(struct intel_dp *intel_dp)
 {
 	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
 	u32 deemph_reg_value, margin_reg_value;
@@ -3995,7 +4125,7 @@ static u32 chv_signal_levels(struct intel_dp *intel_dp)
 			uniq_trans_scale = true;
 			break;
 		default:
-			return 0;
+			return;
 		}
 		break;
 	case DP_TRAIN_PRE_EMPH_LEVEL_1:
@@ -4013,7 +4143,7 @@ static u32 chv_signal_levels(struct intel_dp *intel_dp)
 			margin_reg_value = 154;
 			break;
 		default:
-			return 0;
+			return;
 		}
 		break;
 	case DP_TRAIN_PRE_EMPH_LEVEL_2:
@@ -4027,7 +4157,7 @@ static u32 chv_signal_levels(struct intel_dp *intel_dp)
 			margin_reg_value = 154;
 			break;
 		default:
-			return 0;
+			return;
 		}
 		break;
 	case DP_TRAIN_PRE_EMPH_LEVEL_3:
@@ -4037,21 +4167,18 @@ static u32 chv_signal_levels(struct intel_dp *intel_dp)
 			margin_reg_value = 154;
 			break;
 		default:
-			return 0;
+			return;
 		}
 		break;
 	default:
-		return 0;
+		return;
 	}
 
 	chv_set_phy_signal_level(encoder, deemph_reg_value,
 				 margin_reg_value, uniq_trans_scale);
-
-	return 0;
 }
 
-static u32
-g4x_signal_levels(u8 train_set)
+static u32 g4x_signal_levels(u8 train_set)
 {
 	u32 signal_levels = 0;
 
@@ -4088,12 +4215,31 @@ g4x_signal_levels(u8 train_set)
 	return signal_levels;
 }
 
+static void
+g4x_set_signal_levels(struct intel_dp *intel_dp)
+{
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	u8 train_set = intel_dp->train_set[0];
+	u32 signal_levels;
+
+	signal_levels = g4x_signal_levels(train_set);
+
+	drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n",
+		    signal_levels);
+
+	intel_dp->DP &= ~(DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK);
+	intel_dp->DP |= signal_levels;
+
+	intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP);
+	intel_de_posting_read(dev_priv, intel_dp->output_reg);
+}
+
 /* SNB CPU eDP voltage swing and pre-emphasis control */
-static u32
-snb_cpu_edp_signal_levels(u8 train_set)
+static u32 snb_cpu_edp_signal_levels(u8 train_set)
 {
-	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
-					 DP_TRAIN_PRE_EMPHASIS_MASK);
+	u8 signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+					DP_TRAIN_PRE_EMPHASIS_MASK);
+
 	switch (signal_levels) {
 	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
 	case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
@@ -4116,12 +4262,31 @@ snb_cpu_edp_signal_levels(u8 train_set)
 	}
 }
 
+static void
+snb_cpu_edp_set_signal_levels(struct intel_dp *intel_dp)
+{
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	u8 train_set = intel_dp->train_set[0];
+	u32 signal_levels;
+
+	signal_levels = snb_cpu_edp_signal_levels(train_set);
+
+	drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n",
+		    signal_levels);
+
+	intel_dp->DP &= ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
+	intel_dp->DP |= signal_levels;
+
+	intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP);
+	intel_de_posting_read(dev_priv, intel_dp->output_reg);
+}
+
 /* IVB CPU eDP voltage swing and pre-emphasis control */
-static u32
-ivb_cpu_edp_signal_levels(u8 train_set)
+static u32 ivb_cpu_edp_signal_levels(u8 train_set)
 {
-	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
-					 DP_TRAIN_PRE_EMPHASIS_MASK);
+	u8 signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+					DP_TRAIN_PRE_EMPHASIS_MASK);
+
 	switch (signal_levels) {
 	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
 		return EDP_LINK_TRAIN_400MV_0DB_IVB;
@@ -4147,38 +4312,29 @@ ivb_cpu_edp_signal_levels(u8 train_set)
 	}
 }
 
-void
-intel_dp_set_signal_levels(struct intel_dp *intel_dp)
+static void
+ivb_cpu_edp_set_signal_levels(struct intel_dp *intel_dp)
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	enum port port = intel_dig_port->base.port;
-	u32 signal_levels, mask = 0;
 	u8 train_set = intel_dp->train_set[0];
+	u32 signal_levels;
 
-	if (IS_GEN9_LP(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
-		signal_levels = bxt_signal_levels(intel_dp);
-	} else if (HAS_DDI(dev_priv)) {
-		signal_levels = ddi_signal_levels(intel_dp);
-		mask = DDI_BUF_EMP_MASK;
-	} else if (IS_CHERRYVIEW(dev_priv)) {
-		signal_levels = chv_signal_levels(intel_dp);
-	} else if (IS_VALLEYVIEW(dev_priv)) {
-		signal_levels = vlv_signal_levels(intel_dp);
-	} else if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) {
-		signal_levels = ivb_cpu_edp_signal_levels(train_set);
-		mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
-	} else if (IS_GEN(dev_priv, 6) && port == PORT_A) {
-		signal_levels = snb_cpu_edp_signal_levels(train_set);
-		mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
-	} else {
-		signal_levels = g4x_signal_levels(train_set);
-		mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK;
-	}
+	signal_levels = ivb_cpu_edp_signal_levels(train_set);
+
+	drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n",
+		    signal_levels);
+
+	intel_dp->DP &= ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
+	intel_dp->DP |= signal_levels;
+
+	intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP);
+	intel_de_posting_read(dev_priv, intel_dp->output_reg);
+}
 
-	if (mask)
-		drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n",
-			    signal_levels);
+void intel_dp_set_signal_levels(struct intel_dp *intel_dp)
+{
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	u8 train_set = intel_dp->train_set[0];
 
 	drm_dbg_kms(&dev_priv->drm, "Using vswing level %d%s\n",
 		    train_set & DP_TRAIN_VOLTAGE_SWING_MASK,
@@ -4189,55 +4345,28 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp)
 		    train_set & DP_TRAIN_MAX_PRE_EMPHASIS_REACHED ?
 		    " (max)" : "");
 
-	intel_dp->DP = (intel_dp->DP & ~mask) | signal_levels;
-
-	intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP);
-	intel_de_posting_read(dev_priv, intel_dp->output_reg);
+	intel_dp->set_signal_levels(intel_dp);
 }
 
 void
 intel_dp_program_link_training_pattern(struct intel_dp *intel_dp,
 				       u8 dp_train_pat)
 {
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_i915_private *dev_priv =
-		to_i915(intel_dig_port->base.base.dev);
-
-	_intel_dp_set_link_train(intel_dp, &intel_dp->DP, dp_train_pat);
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	u8 train_pat_mask = drm_dp_training_pattern_mask(intel_dp->dpcd);
 
-	intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP);
-	intel_de_posting_read(dev_priv, intel_dp->output_reg);
+	if (dp_train_pat & train_pat_mask)
+		drm_dbg_kms(&dev_priv->drm,
+			    "Using DP training pattern TPS%d\n",
+			    dp_train_pat & train_pat_mask);
+
+	intel_dp->set_link_train(intel_dp, dp_train_pat);
 }
 
 void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
 {
-	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	enum port port = intel_dig_port->base.port;
-	u32 val;
-
-	if (!HAS_DDI(dev_priv))
-		return;
-
-	val = intel_de_read(dev_priv, intel_dp->regs.dp_tp_ctl);
-	val &= ~DP_TP_CTL_LINK_TRAIN_MASK;
-	val |= DP_TP_CTL_LINK_TRAIN_IDLE;
-	intel_de_write(dev_priv, intel_dp->regs.dp_tp_ctl, val);
-
-	/*
-	 * Until TGL on PORT_A we can have only eDP in SST mode. There the only
-	 * reason we need to set idle transmission mode is to work around a HW
-	 * issue where we enable the pipe while not in idle link-training mode.
-	 * In this case there is requirement to wait for a minimum number of
-	 * idle patterns to be sent.
-	 */
-	if (port == PORT_A && INTEL_GEN(dev_priv) < 12)
-		return;
-
-	if (intel_de_wait_for_set(dev_priv, intel_dp->regs.dp_tp_status,
-				  DP_TP_STATUS_IDLE_DONE, 1))
-		drm_err(&dev_priv->drm,
-			"Timed out waiting for DP idle patterns\n");
+	if (intel_dp->set_idle_link_train)
+		intel_dp->set_idle_link_train(intel_dp);
 }
 
 static void
@@ -4316,6 +4445,7 @@ intel_dp_link_down(struct intel_encoder *encoder,
 static void
 intel_dp_extended_receiver_capabilities(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 dpcd_ext[6];
 
 	/*
@@ -4331,20 +4461,22 @@ intel_dp_extended_receiver_capabilities(struct intel_dp *intel_dp)
 
 	if (drm_dp_dpcd_read(&intel_dp->aux, DP_DP13_DPCD_REV,
 			     &dpcd_ext, sizeof(dpcd_ext)) != sizeof(dpcd_ext)) {
-		DRM_ERROR("DPCD failed read at extended capabilities\n");
+		drm_err(&i915->drm,
+			"DPCD failed read at extended capabilities\n");
 		return;
 	}
 
 	if (intel_dp->dpcd[DP_DPCD_REV] > dpcd_ext[DP_DPCD_REV]) {
-		DRM_DEBUG_KMS("DPCD extended DPCD rev less than base DPCD rev\n");
+		drm_dbg_kms(&i915->drm,
+			    "DPCD extended DPCD rev less than base DPCD rev\n");
 		return;
 	}
 
 	if (!memcmp(intel_dp->dpcd, dpcd_ext, sizeof(dpcd_ext)))
 		return;
 
-	DRM_DEBUG_KMS("Base DPCD: %*ph\n",
-		      (int)sizeof(intel_dp->dpcd), intel_dp->dpcd);
+	drm_dbg_kms(&i915->drm, "Base DPCD: %*ph\n",
+		    (int)sizeof(intel_dp->dpcd), intel_dp->dpcd);
 
 	memcpy(intel_dp->dpcd, dpcd_ext, sizeof(dpcd_ext));
 }
@@ -4352,13 +4484,16 @@ intel_dp_extended_receiver_capabilities(struct intel_dp *intel_dp)
 bool
 intel_dp_read_dpcd(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+
 	if (drm_dp_dpcd_read(&intel_dp->aux, 0x000, intel_dp->dpcd,
 			     sizeof(intel_dp->dpcd)) < 0)
 		return false; /* aux transfer failed */
 
 	intel_dp_extended_receiver_capabilities(intel_dp);
 
-	DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
+	drm_dbg_kms(&i915->drm, "DPCD: %*ph\n", (int)sizeof(intel_dp->dpcd),
+		    intel_dp->dpcd);
 
 	return intel_dp->dpcd[DP_DPCD_REV] != 0;
 }
@@ -4375,6 +4510,8 @@ bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp)
 
 static void intel_dp_get_dsc_sink_cap(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+
 	/*
 	 * Clear the cached register set to avoid using stale values
 	 * for the sinks that do not support DSC.
@@ -4390,20 +4527,23 @@ static void intel_dp_get_dsc_sink_cap(struct intel_dp *intel_dp)
 		if (drm_dp_dpcd_read(&intel_dp->aux, DP_DSC_SUPPORT,
 				     intel_dp->dsc_dpcd,
 				     sizeof(intel_dp->dsc_dpcd)) < 0)
-			DRM_ERROR("Failed to read DPCD register 0x%x\n",
-				  DP_DSC_SUPPORT);
+			drm_err(&i915->drm,
+				"Failed to read DPCD register 0x%x\n",
+				DP_DSC_SUPPORT);
 
-		DRM_DEBUG_KMS("DSC DPCD: %*ph\n",
-			      (int)sizeof(intel_dp->dsc_dpcd),
-			      intel_dp->dsc_dpcd);
+		drm_dbg_kms(&i915->drm, "DSC DPCD: %*ph\n",
+			    (int)sizeof(intel_dp->dsc_dpcd),
+			    intel_dp->dsc_dpcd);
 
 		/* FEC is supported only on DP 1.4 */
 		if (!intel_dp_is_edp(intel_dp) &&
 		    drm_dp_dpcd_readb(&intel_dp->aux, DP_FEC_CAPABILITY,
 				      &intel_dp->fec_capable) < 0)
-			DRM_ERROR("Failed to read FEC DPCD register\n");
+			drm_err(&i915->drm,
+				"Failed to read FEC DPCD register\n");
 
-		DRM_DEBUG_KMS("FEC CAPABILITY: %x\n", intel_dp->fec_capable);
+		drm_dbg_kms(&i915->drm, "FEC CAPABILITY: %x\n",
+			    intel_dp->fec_capable);
 	}
 }
 
@@ -4577,14 +4717,16 @@ intel_dp_can_mst(struct intel_dp *intel_dp)
 static void
 intel_dp_configure_mst(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	struct intel_encoder *encoder =
 		&dp_to_dig_port(intel_dp)->base;
 	bool sink_can_mst = intel_dp_sink_can_mst(intel_dp);
 
-	DRM_DEBUG_KMS("[ENCODER:%d:%s] MST support: port: %s, sink: %s, modparam: %s\n",
-		      encoder->base.base.id, encoder->base.name,
-		      yesno(intel_dp->can_mst), yesno(sink_can_mst),
-		      yesno(i915_modparams.enable_dp_mst));
+	drm_dbg_kms(&i915->drm,
+		    "[ENCODER:%d:%s] MST support: port: %s, sink: %s, modparam: %s\n",
+		    encoder->base.base.id, encoder->base.name,
+		    yesno(intel_dp->can_mst), yesno(sink_can_mst),
+		    yesno(i915_modparams.enable_dp_mst));
 
 	if (!intel_dp->can_mst)
 		return;
@@ -4630,6 +4772,205 @@ intel_dp_needs_vsc_sdp(const struct intel_crtc_state *crtc_state,
 	return false;
 }
 
+static ssize_t intel_dp_vsc_sdp_pack(const struct drm_dp_vsc_sdp *vsc,
+				     struct dp_sdp *sdp, size_t size)
+{
+	size_t length = sizeof(struct dp_sdp);
+
+	if (size < length)
+		return -ENOSPC;
+
+	memset(sdp, 0, size);
+
+	/*
+	 * Prepare VSC Header for SU as per DP 1.4a spec, Table 2-119
+	 * VSC SDP Header Bytes
+	 */
+	sdp->sdp_header.HB0 = 0; /* Secondary-Data Packet ID = 0 */
+	sdp->sdp_header.HB1 = vsc->sdp_type; /* Secondary-data Packet Type */
+	sdp->sdp_header.HB2 = vsc->revision; /* Revision Number */
+	sdp->sdp_header.HB3 = vsc->length; /* Number of Valid Data Bytes */
+
+	/* VSC SDP Payload for DB16 through DB18 */
+	/* Pixel Encoding and Colorimetry Formats  */
+	sdp->db[16] = (vsc->pixelformat & 0xf) << 4; /* DB16[7:4] */
+	sdp->db[16] |= vsc->colorimetry & 0xf; /* DB16[3:0] */
+
+	switch (vsc->bpc) {
+	case 6:
+		/* 6bpc: 0x0 */
+		break;
+	case 8:
+		sdp->db[17] = 0x1; /* DB17[3:0] */
+		break;
+	case 10:
+		sdp->db[17] = 0x2;
+		break;
+	case 12:
+		sdp->db[17] = 0x3;
+		break;
+	case 16:
+		sdp->db[17] = 0x4;
+		break;
+	default:
+		MISSING_CASE(vsc->bpc);
+		break;
+	}
+	/* Dynamic Range and Component Bit Depth */
+	if (vsc->dynamic_range == DP_DYNAMIC_RANGE_CTA)
+		sdp->db[17] |= 0x80;  /* DB17[7] */
+
+	/* Content Type */
+	sdp->db[18] = vsc->content_type & 0x7;
+
+	return length;
+}
+
+static ssize_t
+intel_dp_hdr_metadata_infoframe_sdp_pack(const struct hdmi_drm_infoframe *drm_infoframe,
+					 struct dp_sdp *sdp,
+					 size_t size)
+{
+	size_t length = sizeof(struct dp_sdp);
+	const int infoframe_size = HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE;
+	unsigned char buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE];
+	ssize_t len;
+
+	if (size < length)
+		return -ENOSPC;
+
+	memset(sdp, 0, size);
+
+	len = hdmi_drm_infoframe_pack_only(drm_infoframe, buf, sizeof(buf));
+	if (len < 0) {
+		DRM_DEBUG_KMS("buffer size is smaller than hdr metadata infoframe\n");
+		return -ENOSPC;
+	}
+
+	if (len != infoframe_size) {
+		DRM_DEBUG_KMS("wrong static hdr metadata size\n");
+		return -ENOSPC;
+	}
+
+	/*
+	 * Set up the infoframe sdp packet for HDR static metadata.
+	 * Prepare VSC Header for SU as per DP 1.4a spec,
+	 * Table 2-100 and Table 2-101
+	 */
+
+	/* Secondary-Data Packet ID, 00h for non-Audio INFOFRAME */
+	sdp->sdp_header.HB0 = 0;
+	/*
+	 * Packet Type 80h + Non-audio INFOFRAME Type value
+	 * HDMI_INFOFRAME_TYPE_DRM: 0x87
+	 * - 80h + Non-audio INFOFRAME Type value
+	 * - InfoFrame Type: 0x07
+	 *    [CTA-861-G Table-42 Dynamic Range and Mastering InfoFrame]
+	 */
+	sdp->sdp_header.HB1 = drm_infoframe->type;
+	/*
+	 * Least Significant Eight Bits of (Data Byte Count – 1)
+	 * infoframe_size - 1
+	 */
+	sdp->sdp_header.HB2 = 0x1D;
+	/* INFOFRAME SDP Version Number */
+	sdp->sdp_header.HB3 = (0x13 << 2);
+	/* CTA Header Byte 2 (INFOFRAME Version Number) */
+	sdp->db[0] = drm_infoframe->version;
+	/* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */
+	sdp->db[1] = drm_infoframe->length;
+	/*
+	 * Copy HDMI_DRM_INFOFRAME_SIZE size from a buffer after
+	 * HDMI_INFOFRAME_HEADER_SIZE
+	 */
+	BUILD_BUG_ON(sizeof(sdp->db) < HDMI_DRM_INFOFRAME_SIZE + 2);
+	memcpy(&sdp->db[2], &buf[HDMI_INFOFRAME_HEADER_SIZE],
+	       HDMI_DRM_INFOFRAME_SIZE);
+
+	/*
+	 * Size of DP infoframe sdp packet for HDR static metadata consists of
+	 * - DP SDP Header(struct dp_sdp_header): 4 bytes
+	 * - Two Data Blocks: 2 bytes
+	 *    CTA Header Byte2 (INFOFRAME Version Number)
+	 *    CTA Header Byte3 (Length of INFOFRAME)
+	 * - HDMI_DRM_INFOFRAME_SIZE: 26 bytes
+	 *
+	 * Prior to GEN11's GMP register size is identical to DP HDR static metadata
+	 * infoframe size. But GEN11+ has larger than that size, write_infoframe
+	 * will pad rest of the size.
+	 */
+	return sizeof(struct dp_sdp_header) + 2 + HDMI_DRM_INFOFRAME_SIZE;
+}
+
+static void intel_write_dp_sdp(struct intel_encoder *encoder,
+			       const struct intel_crtc_state *crtc_state,
+			       unsigned int type)
+{
+	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct dp_sdp sdp = {};
+	ssize_t len;
+
+	if ((crtc_state->infoframes.enable &
+	     intel_hdmi_infoframe_enable(type)) == 0)
+		return;
+
+	switch (type) {
+	case DP_SDP_VSC:
+		len = intel_dp_vsc_sdp_pack(&crtc_state->infoframes.vsc, &sdp,
+					    sizeof(sdp));
+		break;
+	case HDMI_PACKET_TYPE_GAMUT_METADATA:
+		len = intel_dp_hdr_metadata_infoframe_sdp_pack(&crtc_state->infoframes.drm.drm,
+							       &sdp, sizeof(sdp));
+		break;
+	default:
+		MISSING_CASE(type);
+		return;
+	}
+
+	if (drm_WARN_ON(&dev_priv->drm, len < 0))
+		return;
+
+	intel_dig_port->write_infoframe(encoder, crtc_state, type, &sdp, len);
+}
+
+void intel_dp_set_infoframes(struct intel_encoder *encoder,
+			     bool enable,
+			     const struct intel_crtc_state *crtc_state,
+			     const struct drm_connector_state *conn_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	i915_reg_t reg = HSW_TVIDEO_DIP_CTL(crtc_state->cpu_transcoder);
+	u32 dip_enable = VIDEO_DIP_ENABLE_AVI_HSW | VIDEO_DIP_ENABLE_GCP_HSW |
+			 VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW |
+			 VIDEO_DIP_ENABLE_SPD_HSW | VIDEO_DIP_ENABLE_DRM_GLK;
+	u32 val = intel_de_read(dev_priv, reg);
+
+	/* TODO: Add DSC case (DIP_ENABLE_PPS) */
+	/* When PSR is enabled, this routine doesn't disable VSC DIP */
+	if (intel_psr_enabled(intel_dp))
+		val &= ~dip_enable;
+	else
+		val &= ~(dip_enable | VIDEO_DIP_ENABLE_VSC_HSW);
+
+	if (!enable) {
+		intel_de_write(dev_priv, reg, val);
+		intel_de_posting_read(dev_priv, reg);
+		return;
+	}
+
+	intel_de_write(dev_priv, reg, val);
+	intel_de_posting_read(dev_priv, reg);
+
+	/* When PSR is enabled, VSC SDP is handled by PSR routine */
+	if (!intel_psr_enabled(intel_dp))
+		intel_write_dp_sdp(encoder, crtc_state, DP_SDP_VSC);
+
+	intel_write_dp_sdp(encoder, crtc_state, HDMI_PACKET_TYPE_GAMUT_METADATA);
+}
+
 static void
 intel_dp_setup_vsc_sdp(struct intel_dp *intel_dp,
 		       const struct intel_crtc_state *crtc_state,
@@ -4759,6 +5100,7 @@ intel_dp_setup_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp,
 					  const struct intel_crtc_state *crtc_state,
 					  const struct drm_connector_state *conn_state)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct dp_sdp infoframe_sdp = {};
 	struct hdmi_drm_infoframe drm_infoframe = {};
@@ -4769,18 +5111,20 @@ intel_dp_setup_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp,
 
 	ret = drm_hdmi_infoframe_set_hdr_metadata(&drm_infoframe, conn_state);
 	if (ret) {
-		DRM_DEBUG_KMS("couldn't set HDR metadata in infoframe\n");
+		drm_dbg_kms(&i915->drm,
+			    "couldn't set HDR metadata in infoframe\n");
 		return;
 	}
 
 	len = hdmi_drm_infoframe_pack_only(&drm_infoframe, buf, sizeof(buf));
 	if (len < 0) {
-		DRM_DEBUG_KMS("buffer size is smaller than hdr metadata infoframe\n");
+		drm_dbg_kms(&i915->drm,
+			    "buffer size is smaller than hdr metadata infoframe\n");
 		return;
 	}
 
 	if (len != infoframe_size) {
-		DRM_DEBUG_KMS("wrong static hdr metadata size\n");
+		drm_dbg_kms(&i915->drm, "wrong static hdr metadata size\n");
 		return;
 	}
 
@@ -4858,6 +5202,7 @@ void intel_dp_hdr_metadata_enable(struct intel_dp *intel_dp,
 
 static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	int status = 0;
 	int test_link_rate;
 	u8 test_lane_count, test_link_bw;
@@ -4869,7 +5214,7 @@ static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 				   &test_lane_count);
 
 	if (status <= 0) {
-		DRM_DEBUG_KMS("Lane count read failed\n");
+		drm_dbg_kms(&i915->drm, "Lane count read failed\n");
 		return DP_TEST_NAK;
 	}
 	test_lane_count &= DP_MAX_LANE_COUNT_MASK;
@@ -4877,7 +5222,7 @@ static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE,
 				   &test_link_bw);
 	if (status <= 0) {
-		DRM_DEBUG_KMS("Link Rate read failed\n");
+		drm_dbg_kms(&i915->drm, "Link Rate read failed\n");
 		return DP_TEST_NAK;
 	}
 	test_link_rate = drm_dp_bw_code_to_link_rate(test_link_bw);
@@ -4895,6 +5240,7 @@ static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 
 static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 test_pattern;
 	u8 test_misc;
 	__be16 h_width, v_height;
@@ -4904,7 +5250,7 @@ static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_PATTERN,
 				   &test_pattern);
 	if (status <= 0) {
-		DRM_DEBUG_KMS("Test pattern read failed\n");
+		drm_dbg_kms(&i915->drm, "Test pattern read failed\n");
 		return DP_TEST_NAK;
 	}
 	if (test_pattern != DP_COLOR_RAMP)
@@ -4913,21 +5259,21 @@ static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI,
 				  &h_width, 2);
 	if (status <= 0) {
-		DRM_DEBUG_KMS("H Width read failed\n");
+		drm_dbg_kms(&i915->drm, "H Width read failed\n");
 		return DP_TEST_NAK;
 	}
 
 	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI,
 				  &v_height, 2);
 	if (status <= 0) {
-		DRM_DEBUG_KMS("V Height read failed\n");
+		drm_dbg_kms(&i915->drm, "V Height read failed\n");
 		return DP_TEST_NAK;
 	}
 
 	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_MISC0,
 				   &test_misc);
 	if (status <= 0) {
-		DRM_DEBUG_KMS("TEST MISC read failed\n");
+		drm_dbg_kms(&i915->drm, "TEST MISC read failed\n");
 		return DP_TEST_NAK;
 	}
 	if ((test_misc & DP_TEST_COLOR_FORMAT_MASK) != DP_COLOR_FORMAT_RGB)
@@ -4956,6 +5302,7 @@ static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 
 static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 test_result = DP_TEST_ACK;
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
 	struct drm_connector *connector = &intel_connector->base;
@@ -4972,9 +5319,10 @@ static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp)
 		 */
 		if (intel_dp->aux.i2c_nack_count > 0 ||
 			intel_dp->aux.i2c_defer_count > 0)
-			DRM_DEBUG_KMS("EDID read had %d NACKs, %d DEFERs\n",
-				      intel_dp->aux.i2c_nack_count,
-				      intel_dp->aux.i2c_defer_count);
+			drm_dbg_kms(&i915->drm,
+				    "EDID read had %d NACKs, %d DEFERs\n",
+				    intel_dp->aux.i2c_nack_count,
+				    intel_dp->aux.i2c_defer_count);
 		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_FAILSAFE;
 	} else {
 		struct edid *block = intel_connector->detect_edid;
@@ -4986,7 +5334,8 @@ static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp)
 
 		if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_EDID_CHECKSUM,
 				       block->checksum) <= 0)
-			DRM_DEBUG_KMS("Failed to write EDID checksum\n");
+			drm_dbg_kms(&i915->drm,
+				    "Failed to write EDID checksum\n");
 
 		test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;
 		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED;
@@ -4998,43 +5347,217 @@ static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp)
 	return test_result;
 }
 
+static u8 intel_dp_prepare_phytest(struct intel_dp *intel_dp)
+{
+	struct drm_dp_phy_test_params *data =
+		&intel_dp->compliance.test_data.phytest;
+
+	if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) {
+		DRM_DEBUG_KMS("DP Phy Test pattern AUX read failure\n");
+		return DP_TEST_NAK;
+	}
+
+	/*
+	 * link_mst is set to false to avoid executing mst related code
+	 * during compliance testing.
+	 */
+	intel_dp->link_mst = false;
+
+	return DP_TEST_ACK;
+}
+
+static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
+{
+	struct drm_i915_private *dev_priv =
+			to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_dp_phy_test_params *data =
+			&intel_dp->compliance.test_data.phytest;
+	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+	enum pipe pipe = crtc->pipe;
+	u32 pattern_val;
+
+	switch (data->phy_pattern) {
+	case DP_PHY_TEST_PATTERN_NONE:
+		DRM_DEBUG_KMS("Disable Phy Test Pattern\n");
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
+		break;
+	case DP_PHY_TEST_PATTERN_D10_2:
+		DRM_DEBUG_KMS("Set D10.2 Phy Test Pattern\n");
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2);
+		break;
+	case DP_PHY_TEST_PATTERN_ERROR_COUNT:
+		DRM_DEBUG_KMS("Set Error Count Phy Test Pattern\n");
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE |
+			       DDI_DP_COMP_CTL_SCRAMBLED_0);
+		break;
+	case DP_PHY_TEST_PATTERN_PRBS7:
+		DRM_DEBUG_KMS("Set PRBS7 Phy Test Pattern\n");
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7);
+		break;
+	case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+		/*
+		 * FIXME: Ideally pattern should come from DPCD 0x250. As
+		 * current firmware of DPR-100 could not set it, so hardcoding
+		 * now for complaince test.
+		 */
+		DRM_DEBUG_KMS("Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n");
+		pattern_val = 0x3e0f83e0;
+		intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 0), pattern_val);
+		pattern_val = 0x0f83e0f8;
+		intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 1), pattern_val);
+		pattern_val = 0x0000f83e;
+		intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 2), pattern_val);
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE |
+			       DDI_DP_COMP_CTL_CUSTOM80);
+		break;
+	case DP_PHY_TEST_PATTERN_CP2520:
+		/*
+		 * FIXME: Ideally pattern should come from DPCD 0x24A. As
+		 * current firmware of DPR-100 could not set it, so hardcoding
+		 * now for complaince test.
+		 */
+		DRM_DEBUG_KMS("Set HBR2 compliance Phy Test Pattern\n");
+		pattern_val = 0xFB;
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 |
+			       pattern_val);
+		break;
+	default:
+		WARN(1, "Invalid Phy Test Pattern\n");
+	}
+}
+
+static void
+intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+	enum pipe pipe = crtc->pipe;
+	u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
+
+	trans_ddi_func_ctl_value = intel_de_read(dev_priv,
+						 TRANS_DDI_FUNC_CTL(pipe));
+	trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
+	dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
+
+	trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE |
+				      TGL_TRANS_DDI_PORT_MASK);
+	trans_conf_value &= ~PIPECONF_ENABLE;
+	dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE;
+
+	intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
+	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
+		       trans_ddi_func_ctl_value);
+	intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
+}
+
+static void
+intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp, uint8_t lane_cnt)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	enum port port = intel_dig_port->base.port;
+	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+	enum pipe pipe = crtc->pipe;
+	u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
+
+	trans_ddi_func_ctl_value = intel_de_read(dev_priv,
+						 TRANS_DDI_FUNC_CTL(pipe));
+	trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
+	dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
+
+	trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE |
+				    TGL_TRANS_DDI_SELECT_PORT(port);
+	trans_conf_value |= PIPECONF_ENABLE;
+	dp_tp_ctl_value |= DP_TP_CTL_ENABLE;
+
+	intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
+	intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
+	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
+		       trans_ddi_func_ctl_value);
+}
+
+void intel_dp_process_phy_request(struct intel_dp *intel_dp)
+{
+	struct drm_dp_phy_test_params *data =
+		&intel_dp->compliance.test_data.phytest;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+
+	if (!intel_dp_get_link_status(intel_dp, link_status)) {
+		DRM_DEBUG_KMS("failed to get link status\n");
+		return;
+	}
+
+	/* retrieve vswing & pre-emphasis setting */
+	intel_dp_get_adjust_train(intel_dp, link_status);
+
+	intel_dp_autotest_phy_ddi_disable(intel_dp);
+
+	intel_dp_set_signal_levels(intel_dp);
+
+	intel_dp_phy_pattern_update(intel_dp);
+
+	intel_dp_autotest_phy_ddi_enable(intel_dp, data->num_lanes);
+
+	drm_dp_set_phy_test_pattern(&intel_dp->aux, data,
+				    link_status[DP_DPCD_REV]);
+}
+
 static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp)
 {
-	u8 test_result = DP_TEST_NAK;
+	u8 test_result;
+
+	test_result = intel_dp_prepare_phytest(intel_dp);
+	if (test_result != DP_TEST_ACK)
+		DRM_ERROR("Phy test preparation failed\n");
+
+	intel_dp_process_phy_request(intel_dp);
+
 	return test_result;
 }
 
 static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 response = DP_TEST_NAK;
 	u8 request = 0;
 	int status;
 
 	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_REQUEST, &request);
 	if (status <= 0) {
-		DRM_DEBUG_KMS("Could not read test request from sink\n");
+		drm_dbg_kms(&i915->drm,
+			    "Could not read test request from sink\n");
 		goto update_status;
 	}
 
 	switch (request) {
 	case DP_TEST_LINK_TRAINING:
-		DRM_DEBUG_KMS("LINK_TRAINING test requested\n");
+		drm_dbg_kms(&i915->drm, "LINK_TRAINING test requested\n");
 		response = intel_dp_autotest_link_training(intel_dp);
 		break;
 	case DP_TEST_LINK_VIDEO_PATTERN:
-		DRM_DEBUG_KMS("TEST_PATTERN test requested\n");
+		drm_dbg_kms(&i915->drm, "TEST_PATTERN test requested\n");
 		response = intel_dp_autotest_video_pattern(intel_dp);
 		break;
 	case DP_TEST_LINK_EDID_READ:
-		DRM_DEBUG_KMS("EDID test requested\n");
+		drm_dbg_kms(&i915->drm, "EDID test requested\n");
 		response = intel_dp_autotest_edid(intel_dp);
 		break;
 	case DP_TEST_LINK_PHY_TEST_PATTERN:
-		DRM_DEBUG_KMS("PHY_PATTERN test requested\n");
+		drm_dbg_kms(&i915->drm, "PHY_PATTERN test requested\n");
 		response = intel_dp_autotest_phy_pattern(intel_dp);
 		break;
 	default:
-		DRM_DEBUG_KMS("Invalid test request '%02x'\n", request);
+		drm_dbg_kms(&i915->drm, "Invalid test request '%02x'\n",
+			    request);
 		break;
 	}
 
@@ -5044,64 +5567,59 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
 update_status:
 	status = drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, response);
 	if (status <= 0)
-		DRM_DEBUG_KMS("Could not write test response to sink\n");
+		drm_dbg_kms(&i915->drm,
+			    "Could not write test response to sink\n");
 }
 
 static int
 intel_dp_check_mst_status(struct intel_dp *intel_dp)
 {
-	bool bret;
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	bool need_retrain = false;
 
-	if (intel_dp->is_mst) {
-		u8 esi[DP_DPRX_ESI_LEN] = { 0 };
-		int ret = 0;
+	if (!intel_dp->is_mst)
+		return -EINVAL;
+
+	WARN_ON_ONCE(intel_dp->active_mst_links < 0);
+
+	for (;;) {
+		u8 esi[DP_DPRX_ESI_LEN] = {};
+		bool bret, handled;
 		int retry;
-		bool handled;
 
-		WARN_ON_ONCE(intel_dp->active_mst_links < 0);
 		bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
-go_again:
-		if (bret == true) {
-
-			/* check link status - esi[10] = 0x200c */
-			if (intel_dp->active_mst_links > 0 &&
-			    !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
-				DRM_DEBUG_KMS("channel EQ not ok, retraining\n");
-				intel_dp_start_link_train(intel_dp);
-				intel_dp_stop_link_train(intel_dp);
-			}
+		if (!bret) {
+			drm_dbg_kms(&i915->drm,
+				    "failed to get ESI - device may have failed\n");
+			return -EINVAL;
+		}
 
-			DRM_DEBUG_KMS("got esi %3ph\n", esi);
-			ret = drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled);
-
-			if (handled) {
-				for (retry = 0; retry < 3; retry++) {
-					int wret;
-					wret = drm_dp_dpcd_write(&intel_dp->aux,
-								 DP_SINK_COUNT_ESI+1,
-								 &esi[1], 3);
-					if (wret == 3) {
-						break;
-					}
-				}
+		/* check link status - esi[10] = 0x200c */
+		if (intel_dp->active_mst_links > 0 && !need_retrain &&
+		    !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
+			drm_dbg_kms(&i915->drm,
+				    "channel EQ not ok, retraining\n");
+			need_retrain = true;
+		}
 
-				bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
-				if (bret == true) {
-					DRM_DEBUG_KMS("got esi2 %3ph\n", esi);
-					goto go_again;
-				}
-			} else
-				ret = 0;
+		drm_dbg_kms(&i915->drm, "got esi %3ph\n", esi);
 
-			return ret;
-		} else {
-			DRM_DEBUG_KMS("failed to get ESI - device may have failed\n");
-			intel_dp->is_mst = false;
-			drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
-							intel_dp->is_mst);
+		drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled);
+		if (!handled)
+			break;
+
+		for (retry = 0; retry < 3; retry++) {
+			int wret;
+
+			wret = drm_dp_dpcd_write(&intel_dp->aux,
+						 DP_SINK_COUNT_ESI+1,
+						 &esi[1], 3);
+			if (wret == 3)
+				break;
 		}
 	}
-	return -EINVAL;
+
+	return need_retrain;
 }
 
 static bool
@@ -5138,20 +5656,102 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp)
 	return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count);
 }
 
+static bool intel_dp_has_connector(struct intel_dp *intel_dp,
+				   const struct drm_connector_state *conn_state)
+{
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	struct intel_encoder *encoder;
+	enum pipe pipe;
+
+	if (!conn_state->best_encoder)
+		return false;
+
+	/* SST */
+	encoder = &dp_to_dig_port(intel_dp)->base;
+	if (conn_state->best_encoder == &encoder->base)
+		return true;
+
+	/* MST */
+	for_each_pipe(i915, pipe) {
+		encoder = &intel_dp->mst_encoders[pipe]->base;
+		if (conn_state->best_encoder == &encoder->base)
+			return true;
+	}
+
+	return false;
+}
+
+static int intel_dp_prep_link_retrain(struct intel_dp *intel_dp,
+				      struct drm_modeset_acquire_ctx *ctx,
+				      u32 *crtc_mask)
+{
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	struct drm_connector_list_iter conn_iter;
+	struct intel_connector *connector;
+	int ret = 0;
+
+	*crtc_mask = 0;
+
+	if (!intel_dp_needs_link_retrain(intel_dp))
+		return 0;
+
+	drm_connector_list_iter_begin(&i915->drm, &conn_iter);
+	for_each_intel_connector_iter(connector, &conn_iter) {
+		struct drm_connector_state *conn_state =
+			connector->base.state;
+		struct intel_crtc_state *crtc_state;
+		struct intel_crtc *crtc;
+
+		if (!intel_dp_has_connector(intel_dp, conn_state))
+			continue;
+
+		crtc = to_intel_crtc(conn_state->crtc);
+		if (!crtc)
+			continue;
+
+		ret = drm_modeset_lock(&crtc->base.mutex, ctx);
+		if (ret)
+			break;
+
+		crtc_state = to_intel_crtc_state(crtc->base.state);
+
+		drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state));
+
+		if (!crtc_state->hw.active)
+			continue;
+
+		if (conn_state->commit &&
+		    !try_wait_for_completion(&conn_state->commit->hw_done))
+			continue;
+
+		*crtc_mask |= drm_crtc_mask(&crtc->base);
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
+	if (!intel_dp_needs_link_retrain(intel_dp))
+		*crtc_mask = 0;
+
+	return ret;
+}
+
+static bool intel_dp_is_connected(struct intel_dp *intel_dp)
+{
+	struct intel_connector *connector = intel_dp->attached_connector;
+
+	return connector->base.status == connector_status_connected ||
+		intel_dp->is_mst;
+}
+
 int intel_dp_retrain_link(struct intel_encoder *encoder,
 			  struct drm_modeset_acquire_ctx *ctx)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-	struct intel_connector *connector = intel_dp->attached_connector;
-	struct drm_connector_state *conn_state;
-	struct intel_crtc_state *crtc_state;
 	struct intel_crtc *crtc;
+	u32 crtc_mask;
 	int ret;
 
-	/* FIXME handle the MST connectors as well */
-
-	if (!connector || connector->base.status != connector_status_connected)
+	if (!intel_dp_is_connected(intel_dp))
 		return 0;
 
 	ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
@@ -5159,46 +5759,42 @@ int intel_dp_retrain_link(struct intel_encoder *encoder,
 	if (ret)
 		return ret;
 
-	conn_state = connector->base.state;
-
-	crtc = to_intel_crtc(conn_state->crtc);
-	if (!crtc)
-		return 0;
-
-	ret = drm_modeset_lock(&crtc->base.mutex, ctx);
+	ret = intel_dp_prep_link_retrain(intel_dp, ctx, &crtc_mask);
 	if (ret)
 		return ret;
 
-	crtc_state = to_intel_crtc_state(crtc->base.state);
-
-	drm_WARN_ON(&dev_priv->drm, !intel_crtc_has_dp_encoder(crtc_state));
-
-	if (!crtc_state->hw.active)
+	if (crtc_mask == 0)
 		return 0;
 
-	if (conn_state->commit &&
-	    !try_wait_for_completion(&conn_state->commit->hw_done))
-		return 0;
+	drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] retraining link\n",
+		    encoder->base.base.id, encoder->base.name);
 
-	if (!intel_dp_needs_link_retrain(intel_dp))
-		return 0;
+	for_each_intel_crtc_mask(&dev_priv->drm, crtc, crtc_mask) {
+		const struct intel_crtc_state *crtc_state =
+			to_intel_crtc_state(crtc->base.state);
 
-	/* Suppress underruns caused by re-training */
-	intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false);
-	if (crtc_state->has_pch_encoder)
-		intel_set_pch_fifo_underrun_reporting(dev_priv,
-						      intel_crtc_pch_transcoder(crtc), false);
+		/* Suppress underruns caused by re-training */
+		intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false);
+		if (crtc_state->has_pch_encoder)
+			intel_set_pch_fifo_underrun_reporting(dev_priv,
+							      intel_crtc_pch_transcoder(crtc), false);
+	}
 
 	intel_dp_start_link_train(intel_dp);
 	intel_dp_stop_link_train(intel_dp);
 
-	/* Keep underrun reporting disabled until things are stable */
-	intel_wait_for_vblank(dev_priv, crtc->pipe);
+	for_each_intel_crtc_mask(&dev_priv->drm, crtc, crtc_mask) {
+		const struct intel_crtc_state *crtc_state =
+			to_intel_crtc_state(crtc->base.state);
+
+		/* Keep underrun reporting disabled until things are stable */
+		intel_wait_for_vblank(dev_priv, crtc->pipe);
 
-	intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
-	if (crtc_state->has_pch_encoder)
-		intel_set_pch_fifo_underrun_reporting(dev_priv,
-						      intel_crtc_pch_transcoder(crtc), true);
+		intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
+		if (crtc_state->has_pch_encoder)
+			intel_set_pch_fifo_underrun_reporting(dev_priv,
+							      intel_crtc_pch_transcoder(crtc), true);
+	}
 
 	return 0;
 }
@@ -5217,14 +5813,13 @@ int intel_dp_retrain_link(struct intel_encoder *encoder,
  */
 static enum intel_hotplug_state
 intel_dp_hotplug(struct intel_encoder *encoder,
-		 struct intel_connector *connector,
-		 bool irq_received)
+		 struct intel_connector *connector)
 {
 	struct drm_modeset_acquire_ctx ctx;
 	enum intel_hotplug_state state;
 	int ret;
 
-	state = intel_encoder_hotplug(encoder, connector, irq_received);
+	state = intel_encoder_hotplug(encoder, connector);
 
 	drm_modeset_acquire_init(&ctx, 0);
 
@@ -5248,7 +5843,7 @@ intel_dp_hotplug(struct intel_encoder *encoder,
 	 * Keeping it consistent with intel_ddi_hotplug() and
 	 * intel_hdmi_hotplug().
 	 */
-	if (state == INTEL_HOTPLUG_UNCHANGED && irq_received)
+	if (state == INTEL_HOTPLUG_UNCHANGED && !connector->hotplug_retries)
 		state = INTEL_HOTPLUG_RETRY;
 
 	return state;
@@ -5256,6 +5851,7 @@ intel_dp_hotplug(struct intel_encoder *encoder,
 
 static void intel_dp_check_service_irq(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 val;
 
 	if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
@@ -5274,7 +5870,7 @@ static void intel_dp_check_service_irq(struct intel_dp *intel_dp)
 		intel_hdcp_handle_cp_irq(intel_dp->attached_connector);
 
 	if (val & DP_SINK_SPECIFIC_IRQ)
-		DRM_DEBUG_DRIVER("Sink specific irq unhandled\n");
+		drm_dbg_kms(&i915->drm, "Sink specific irq unhandled\n");
 }
 
 /*
@@ -5341,6 +5937,7 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
 static enum drm_connector_status
 intel_dp_detect_dpcd(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
 	u8 *dpcd = intel_dp->dpcd;
 	u8 type;
@@ -5388,7 +5985,7 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp)
 	}
 
 	/* Anything else is out of spec, warn and ignore */
-	DRM_DEBUG_KMS("Broken DP branch device, ignoring\n");
+	drm_dbg_kms(&i915->drm, "Broken DP branch device, ignoring\n");
 	return connector_status_disconnected;
 }
 
@@ -5860,6 +6457,7 @@ static int intel_dp_get_modes(struct drm_connector *connector)
 static int
 intel_dp_connector_register(struct drm_connector *connector)
 {
+	struct drm_i915_private *i915 = to_i915(connector->dev);
 	struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
 	int ret;
 
@@ -5867,10 +6465,8 @@ intel_dp_connector_register(struct drm_connector *connector)
 	if (ret)
 		return ret;
 
-	intel_connector_debugfs_add(connector);
-
-	DRM_DEBUG_KMS("registering %s bus for %s\n",
-		      intel_dp->aux.name, connector->kdev->kobj.name);
+	drm_dbg_kms(&i915->drm, "registering %s bus for %s\n",
+		    intel_dp->aux.name, connector->kdev->kobj.name);
 
 	intel_dp->aux.dev = connector->kdev;
 	ret = drm_dp_aux_register(&intel_dp->aux);
@@ -5956,6 +6552,7 @@ static
 int intel_dp_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
 				u8 *an)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(&intel_dig_port->base.base));
 	static const struct drm_dp_aux_msg msg = {
 		.request = DP_AUX_NATIVE_WRITE,
@@ -5970,8 +6567,9 @@ int intel_dp_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
 	dpcd_ret = drm_dp_dpcd_write(&intel_dig_port->dp.aux, DP_AUX_HDCP_AN,
 				     an, DRM_HDCP_AN_LEN);
 	if (dpcd_ret != DRM_HDCP_AN_LEN) {
-		DRM_DEBUG_KMS("Failed to write An over DP/AUX (%zd)\n",
-			      dpcd_ret);
+		drm_dbg_kms(&i915->drm,
+			    "Failed to write An over DP/AUX (%zd)\n",
+			    dpcd_ret);
 		return dpcd_ret >= 0 ? -EIO : dpcd_ret;
 	}
 
@@ -5987,17 +6585,19 @@ int intel_dp_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
 				rxbuf, sizeof(rxbuf),
 				DP_AUX_CH_CTL_AUX_AKSV_SELECT);
 	if (ret < 0) {
-		DRM_DEBUG_KMS("Write Aksv over DP/AUX failed (%d)\n", ret);
+		drm_dbg_kms(&i915->drm,
+			    "Write Aksv over DP/AUX failed (%d)\n", ret);
 		return ret;
 	} else if (ret == 0) {
-		DRM_DEBUG_KMS("Aksv write over DP/AUX was empty\n");
+		drm_dbg_kms(&i915->drm, "Aksv write over DP/AUX was empty\n");
 		return -EIO;
 	}
 
 	reply = (rxbuf[0] >> 4) & DP_AUX_NATIVE_REPLY_MASK;
 	if (reply != DP_AUX_NATIVE_REPLY_ACK) {
-		DRM_DEBUG_KMS("Aksv write: no DP_AUX_NATIVE_REPLY_ACK %x\n",
-			      reply);
+		drm_dbg_kms(&i915->drm,
+			    "Aksv write: no DP_AUX_NATIVE_REPLY_ACK %x\n",
+			    reply);
 		return -EIO;
 	}
 	return 0;
@@ -6006,11 +6606,14 @@ int intel_dp_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
 static int intel_dp_hdcp_read_bksv(struct intel_digital_port *intel_dig_port,
 				   u8 *bksv)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	ssize_t ret;
+
 	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BKSV, bksv,
 			       DRM_HDCP_KSV_LEN);
 	if (ret != DRM_HDCP_KSV_LEN) {
-		DRM_DEBUG_KMS("Read Bksv from DP/AUX failed (%zd)\n", ret);
+		drm_dbg_kms(&i915->drm,
+			    "Read Bksv from DP/AUX failed (%zd)\n", ret);
 		return ret >= 0 ? -EIO : ret;
 	}
 	return 0;
@@ -6019,7 +6622,9 @@ static int intel_dp_hdcp_read_bksv(struct intel_digital_port *intel_dig_port,
 static int intel_dp_hdcp_read_bstatus(struct intel_digital_port *intel_dig_port,
 				      u8 *bstatus)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	ssize_t ret;
+
 	/*
 	 * For some reason the HDMI and DP HDCP specs call this register
 	 * definition by different names. In the HDMI spec, it's called BSTATUS,
@@ -6028,7 +6633,8 @@ static int intel_dp_hdcp_read_bstatus(struct intel_digital_port *intel_dig_port,
 	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BINFO,
 			       bstatus, DRM_HDCP_BSTATUS_LEN);
 	if (ret != DRM_HDCP_BSTATUS_LEN) {
-		DRM_DEBUG_KMS("Read bstatus from DP/AUX failed (%zd)\n", ret);
+		drm_dbg_kms(&i915->drm,
+			    "Read bstatus from DP/AUX failed (%zd)\n", ret);
 		return ret >= 0 ? -EIO : ret;
 	}
 	return 0;
@@ -6038,12 +6644,14 @@ static
 int intel_dp_hdcp_read_bcaps(struct intel_digital_port *intel_dig_port,
 			     u8 *bcaps)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	ssize_t ret;
 
 	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BCAPS,
 			       bcaps, 1);
 	if (ret != 1) {
-		DRM_DEBUG_KMS("Read bcaps from DP/AUX failed (%zd)\n", ret);
+		drm_dbg_kms(&i915->drm,
+			    "Read bcaps from DP/AUX failed (%zd)\n", ret);
 		return ret >= 0 ? -EIO : ret;
 	}
 
@@ -6069,11 +6677,14 @@ static
 int intel_dp_hdcp_read_ri_prime(struct intel_digital_port *intel_dig_port,
 				u8 *ri_prime)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	ssize_t ret;
+
 	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_RI_PRIME,
 			       ri_prime, DRM_HDCP_RI_LEN);
 	if (ret != DRM_HDCP_RI_LEN) {
-		DRM_DEBUG_KMS("Read Ri' from DP/AUX failed (%zd)\n", ret);
+		drm_dbg_kms(&i915->drm, "Read Ri' from DP/AUX failed (%zd)\n",
+			    ret);
 		return ret >= 0 ? -EIO : ret;
 	}
 	return 0;
@@ -6083,12 +6694,15 @@ static
 int intel_dp_hdcp_read_ksv_ready(struct intel_digital_port *intel_dig_port,
 				 bool *ksv_ready)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	ssize_t ret;
 	u8 bstatus;
+
 	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BSTATUS,
 			       &bstatus, 1);
 	if (ret != 1) {
-		DRM_DEBUG_KMS("Read bstatus from DP/AUX failed (%zd)\n", ret);
+		drm_dbg_kms(&i915->drm,
+			    "Read bstatus from DP/AUX failed (%zd)\n", ret);
 		return ret >= 0 ? -EIO : ret;
 	}
 	*ksv_ready = bstatus & DP_BSTATUS_READY;
@@ -6099,6 +6713,7 @@ static
 int intel_dp_hdcp_read_ksv_fifo(struct intel_digital_port *intel_dig_port,
 				int num_downstream, u8 *ksv_fifo)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	ssize_t ret;
 	int i;
 
@@ -6110,8 +6725,9 @@ int intel_dp_hdcp_read_ksv_fifo(struct intel_digital_port *intel_dig_port,
 				       ksv_fifo + i * DRM_HDCP_KSV_LEN,
 				       len);
 		if (ret != len) {
-			DRM_DEBUG_KMS("Read ksv[%d] from DP/AUX failed (%zd)\n",
-				      i, ret);
+			drm_dbg_kms(&i915->drm,
+				    "Read ksv[%d] from DP/AUX failed (%zd)\n",
+				    i, ret);
 			return ret >= 0 ? -EIO : ret;
 		}
 	}
@@ -6122,6 +6738,7 @@ static
 int intel_dp_hdcp_read_v_prime_part(struct intel_digital_port *intel_dig_port,
 				    int i, u32 *part)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	ssize_t ret;
 
 	if (i >= DRM_HDCP_V_PRIME_NUM_PARTS)
@@ -6131,7 +6748,8 @@ int intel_dp_hdcp_read_v_prime_part(struct intel_digital_port *intel_dig_port,
 			       DP_AUX_HDCP_V_PRIME(i), part,
 			       DRM_HDCP_V_PRIME_PART_LEN);
 	if (ret != DRM_HDCP_V_PRIME_PART_LEN) {
-		DRM_DEBUG_KMS("Read v'[%d] from DP/AUX failed (%zd)\n", i, ret);
+		drm_dbg_kms(&i915->drm,
+			    "Read v'[%d] from DP/AUX failed (%zd)\n", i, ret);
 		return ret >= 0 ? -EIO : ret;
 	}
 	return 0;
@@ -6148,13 +6766,15 @@ int intel_dp_hdcp_toggle_signalling(struct intel_digital_port *intel_dig_port,
 static
 bool intel_dp_hdcp_check_link(struct intel_digital_port *intel_dig_port)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	ssize_t ret;
 	u8 bstatus;
 
 	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BSTATUS,
 			       &bstatus, 1);
 	if (ret != 1) {
-		DRM_DEBUG_KMS("Read bstatus from DP/AUX failed (%zd)\n", ret);
+		drm_dbg_kms(&i915->drm,
+			    "Read bstatus from DP/AUX failed (%zd)\n", ret);
 		return false;
 	}
 
@@ -6225,17 +6845,19 @@ static const struct hdcp2_dp_msg_data hdcp2_dp_msg_data[] = {
 	  0, 0 },
 };
 
-static inline
-int intel_dp_hdcp2_read_rx_status(struct intel_digital_port *intel_dig_port,
-				  u8 *rx_status)
+static int
+intel_dp_hdcp2_read_rx_status(struct intel_digital_port *intel_dig_port,
+			      u8 *rx_status)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	ssize_t ret;
 
 	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux,
 			       DP_HDCP_2_2_REG_RXSTATUS_OFFSET, rx_status,
 			       HDCP_2_2_DP_RXSTATUS_LEN);
 	if (ret != HDCP_2_2_DP_RXSTATUS_LEN) {
-		DRM_DEBUG_KMS("Read bstatus from DP/AUX failed (%zd)\n", ret);
+		drm_dbg_kms(&i915->drm,
+			    "Read bstatus from DP/AUX failed (%zd)\n", ret);
 		return ret >= 0 ? -EIO : ret;
 	}
 
@@ -6279,6 +6901,7 @@ static ssize_t
 intel_dp_hdcp2_wait_for_msg(struct intel_digital_port *intel_dig_port,
 			    const struct hdcp2_dp_msg_data *hdcp2_msg_data)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	struct intel_dp *dp = &intel_dig_port->dp;
 	struct intel_hdcp *hdcp = &dp->attached_connector->hdcp;
 	u8 msg_id = hdcp2_msg_data->msg_id;
@@ -6310,8 +6933,9 @@ intel_dp_hdcp2_wait_for_msg(struct intel_digital_port *intel_dig_port,
 	}
 
 	if (ret)
-		DRM_DEBUG_KMS("msg_id %d, ret %d, timeout(mSec): %d\n",
-			      hdcp2_msg_data->msg_id, ret, timeout);
+		drm_dbg_kms(&i915->drm,
+			    "msg_id %d, ret %d, timeout(mSec): %d\n",
+			    hdcp2_msg_data->msg_id, ret, timeout);
 
 	return ret;
 }
@@ -6397,6 +7021,7 @@ static
 int intel_dp_hdcp2_read_msg(struct intel_digital_port *intel_dig_port,
 			    u8 msg_id, void *buf, size_t size)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	unsigned int offset;
 	u8 *byte = buf;
 	ssize_t ret, bytes_to_recv, len;
@@ -6430,7 +7055,8 @@ int intel_dp_hdcp2_read_msg(struct intel_digital_port *intel_dig_port,
 		ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, offset,
 				       (void *)byte, len);
 		if (ret < 0) {
-			DRM_DEBUG_KMS("msg_id %d, ret %zd\n", msg_id, ret);
+			drm_dbg_kms(&i915->drm, "msg_id %d, ret %zd\n",
+				    msg_id, ret);
 			return ret;
 		}
 
@@ -6721,7 +7347,11 @@ static int intel_dp_connector_atomic_check(struct drm_connector *conn,
 	if (ret)
 		return ret;
 
-	if (INTEL_GEN(dev_priv) < 11)
+	/*
+	 * We don't enable port sync on BDW due to missing w/as and
+	 * due to not having adjusted the modeset sequence appropriately.
+	 */
+	if (INTEL_GEN(dev_priv) < 9)
 		return 0;
 
 	if (!intel_connector_needs_modeset(state, conn))
@@ -6760,28 +7390,45 @@ static const struct drm_encoder_funcs intel_dp_enc_funcs = {
 	.destroy = intel_dp_encoder_destroy,
 };
 
+static bool intel_edp_have_power(struct intel_dp *intel_dp)
+{
+	intel_wakeref_t wakeref;
+	bool have_power = false;
+
+	with_pps_lock(intel_dp, wakeref) {
+		have_power = edp_have_panel_power(intel_dp) &&
+						  edp_have_panel_vdd(intel_dp);
+	}
+
+	return have_power;
+}
+
 enum irqreturn
 intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	struct intel_dp *intel_dp = &intel_dig_port->dp;
 
-	if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) {
+	if (intel_dig_port->base.type == INTEL_OUTPUT_EDP &&
+	    (long_hpd || !intel_edp_have_power(intel_dp))) {
 		/*
-		 * vdd off can generate a long pulse on eDP which
+		 * vdd off can generate a long/short pulse on eDP which
 		 * would require vdd on to handle it, and thus we
 		 * would end up in an endless cycle of
-		 * "vdd off -> long hpd -> vdd on -> detect -> vdd off -> ..."
+		 * "vdd off -> long/short hpd -> vdd on -> detect -> vdd off -> ..."
 		 */
-		DRM_DEBUG_KMS("ignoring long hpd on eDP [ENCODER:%d:%s]\n",
-			      intel_dig_port->base.base.base.id,
-			      intel_dig_port->base.base.name);
+		drm_dbg_kms(&i915->drm,
+			    "ignoring %s hpd on eDP [ENCODER:%d:%s]\n",
+			    long_hpd ? "long" : "short",
+			    intel_dig_port->base.base.base.id,
+			    intel_dig_port->base.base.name);
 		return IRQ_HANDLED;
 	}
 
-	DRM_DEBUG_KMS("got hpd irq on [ENCODER:%d:%s] - %s\n",
-		      intel_dig_port->base.base.base.id,
-		      intel_dig_port->base.base.name,
-		      long_hpd ? "long" : "short");
+	drm_dbg_kms(&i915->drm, "got hpd irq on [ENCODER:%d:%s] - %s\n",
+		    intel_dig_port->base.base.base.id,
+		    intel_dig_port->base.base.name,
+		    long_hpd ? "long" : "short");
 
 	if (long_hpd) {
 		intel_dp->reset_link_params = true;
@@ -6789,18 +7436,25 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 	}
 
 	if (intel_dp->is_mst) {
-		if (intel_dp_check_mst_status(intel_dp) == -EINVAL) {
+		switch (intel_dp_check_mst_status(intel_dp)) {
+		case -EINVAL:
 			/*
 			 * If we were in MST mode, and device is not
 			 * there, get out of MST mode
 			 */
-			DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n",
-				      intel_dp->is_mst, intel_dp->mst_mgr.mst_state);
+			drm_dbg_kms(&i915->drm,
+				    "MST device may have disappeared %d vs %d\n",
+				    intel_dp->is_mst,
+				    intel_dp->mst_mgr.mst_state);
 			intel_dp->is_mst = false;
 			drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
 							intel_dp->is_mst);
 
 			return IRQ_NONE;
+		case 1:
+			return IRQ_NONE;
+		default:
+			break;
 		}
 	}
 
@@ -7831,6 +8485,23 @@ bool intel_dp_init(struct drm_i915_private *dev_priv,
 		intel_encoder->post_disable = g4x_post_disable_dp;
 	}
 
+	if ((IS_IVYBRIDGE(dev_priv) && port == PORT_A) ||
+	    (HAS_PCH_CPT(dev_priv) && port != PORT_A))
+		intel_dig_port->dp.set_link_train = cpt_set_link_train;
+	else
+		intel_dig_port->dp.set_link_train = g4x_set_link_train;
+
+	if (IS_CHERRYVIEW(dev_priv))
+		intel_dig_port->dp.set_signal_levels = chv_set_signal_levels;
+	else if (IS_VALLEYVIEW(dev_priv))
+		intel_dig_port->dp.set_signal_levels = vlv_set_signal_levels;
+	else if (IS_IVYBRIDGE(dev_priv) && port == PORT_A)
+		intel_dig_port->dp.set_signal_levels = ivb_cpu_edp_set_signal_levels;
+	else if (IS_GEN(dev_priv, 6) && port == PORT_A)
+		intel_dig_port->dp.set_signal_levels = snb_cpu_edp_set_signal_levels;
+	else
+		intel_dig_port->dp.set_signal_levels = g4x_set_signal_levels;
+
 	intel_dig_port->dp.output_reg = output_reg;
 	intel_dig_port->max_lanes = 4;
 	intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
index 0c7be8ed1423..6659ce15a693 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -114,7 +114,11 @@ void intel_dp_vsc_enable(struct intel_dp *intel_dp,
 void intel_dp_hdr_metadata_enable(struct intel_dp *intel_dp,
 				  const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state);
+void intel_dp_set_infoframes(struct intel_encoder *encoder, bool enable,
+			     const struct intel_crtc_state *crtc_state,
+			     const struct drm_connector_state *conn_state);
 bool intel_digital_port_connected(struct intel_encoder *encoder);
+void intel_dp_process_phy_request(struct intel_dp *intel_dp);
 
 static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
 {
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index dbfa6895795b..0722540d64ad 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -27,6 +27,7 @@
 
 static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 reg_val = 0;
 
 	/* Early return when display use other mechanism to enable backlight. */
@@ -35,8 +36,8 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 
 	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
 			      &reg_val) < 0) {
-		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
-			      DP_EDP_DISPLAY_CONTROL_REGISTER);
+		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
+			    DP_EDP_DISPLAY_CONTROL_REGISTER);
 		return;
 	}
 	if (enable)
@@ -46,8 +47,8 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 
 	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
 			       reg_val) != 1) {
-		DRM_DEBUG_KMS("Failed to %s aux backlight\n",
-			      enable ? "enable" : "disable");
+		drm_dbg_kms(&i915->drm, "Failed to %s aux backlight\n",
+			    enable ? "enable" : "disable");
 	}
 }
 
@@ -58,6 +59,7 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
 {
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 read_val[2] = { 0x0 };
 	u8 mode_reg;
 	u16 level = 0;
@@ -65,8 +67,9 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			      DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
 			      &mode_reg) != 1) {
-		DRM_DEBUG_KMS("Failed to read the DPCD register 0x%x\n",
-			      DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
+		drm_dbg_kms(&i915->drm,
+			    "Failed to read the DPCD register 0x%x\n",
+			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
 		return 0;
 	}
 
@@ -80,8 +83,8 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
 
 	if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
 			     &read_val, sizeof(read_val)) < 0) {
-		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
-			      DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
+		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
+			    DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
 		return 0;
 	}
 	level = read_val[0];
@@ -100,6 +103,7 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev
 {
 	struct intel_connector *connector = to_intel_connector(conn_state->connector);
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 vals[2] = { 0x0 };
 
 	vals[0] = level;
@@ -111,7 +115,8 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev
 	}
 	if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
 			      vals, sizeof(vals)) < 0) {
-		DRM_DEBUG_KMS("Failed to write aux backlight level\n");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to write aux backlight level\n");
 		return;
 	}
 }
@@ -133,7 +138,8 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
 
 	freq = dev_priv->vbt.backlight.pwm_freq_hz;
 	if (!freq) {
-		DRM_DEBUG_KMS("Use panel default backlight frequency\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "Use panel default backlight frequency\n");
 		return false;
 	}
 
@@ -146,13 +152,14 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
 	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
 
 	if (fxp_min > fxp_actual || fxp_actual > fxp_max) {
-		DRM_DEBUG_KMS("Actual frequency out of range\n");
+		drm_dbg_kms(&dev_priv->drm, "Actual frequency out of range\n");
 		return false;
 	}
 
 	if (drm_dp_dpcd_writeb(&intel_dp->aux,
 			       DP_EDP_BACKLIGHT_FREQ_SET, (u8) f) < 0) {
-		DRM_DEBUG_KMS("Failed to write aux backlight freq\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "Failed to write aux backlight freq\n");
 		return false;
 	}
 	return true;
@@ -163,13 +170,14 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
 {
 	struct intel_connector *connector = to_intel_connector(conn_state->connector);
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	struct intel_panel *panel = &connector->panel;
 	u8 dpcd_buf, new_dpcd_buf, edp_backlight_mode;
 
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) {
-		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
-			      DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
+		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
+			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
 		return;
 	}
 
@@ -186,7 +194,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
 		if (drm_dp_dpcd_writeb(&intel_dp->aux,
 				       DP_EDP_PWMGEN_BIT_COUNT,
 				       panel->backlight.pwmgen_bit_count) < 0)
-			DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n");
+			drm_dbg_kms(&i915->drm,
+				    "Failed to write aux pwmgen bit count\n");
 
 		break;
 
@@ -203,7 +212,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
 	if (new_dpcd_buf != dpcd_buf) {
 		if (drm_dp_dpcd_writeb(&intel_dp->aux,
 			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) {
-			DRM_DEBUG_KMS("Failed to write aux backlight mode\n");
+			drm_dbg_kms(&i915->drm,
+				    "Failed to write aux backlight mode\n");
 		}
 	}
 
@@ -237,9 +247,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 	 * minimum value will applied automatically. So no need to check that.
 	 */
 	freq = i915->vbt.backlight.pwm_freq_hz;
-	DRM_DEBUG_KMS("VBT defined backlight frequency %u Hz\n", freq);
+	drm_dbg_kms(&i915->drm, "VBT defined backlight frequency %u Hz\n",
+		    freq);
 	if (!freq) {
-		DRM_DEBUG_KMS("Use panel default backlight frequency\n");
+		drm_dbg_kms(&i915->drm,
+			    "Use panel default backlight frequency\n");
 		return max_backlight;
 	}
 
@@ -254,12 +266,14 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 	 */
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) {
-		DRM_DEBUG_KMS("Failed to read pwmgen bit count cap min\n");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to read pwmgen bit count cap min\n");
 		return max_backlight;
 	}
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) {
-		DRM_DEBUG_KMS("Failed to read pwmgen bit count cap max\n");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to read pwmgen bit count cap max\n");
 		return max_backlight;
 	}
 	pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
@@ -268,7 +282,8 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
 	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
 	if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
-		DRM_DEBUG_KMS("VBT defined backlight frequency out of range\n");
+		drm_dbg_kms(&i915->drm,
+			    "VBT defined backlight frequency out of range\n");
 		return max_backlight;
 	}
 
@@ -279,10 +294,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 			break;
 	}
 
-	DRM_DEBUG_KMS("Using eDP pwmgen bit count of %d\n", pn);
+	drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn);
 	if (drm_dp_dpcd_writeb(&intel_dp->aux,
 			       DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) {
-		DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to write aux pwmgen bit count\n");
 		return max_backlight;
 	}
 	panel->backlight.pwmgen_bit_count = pn;
@@ -312,6 +328,7 @@ static bool
 intel_dp_aux_display_control_capable(struct intel_connector *connector)
 {
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 
 	/* Check the eDP Display control capabilities registers to determine if
 	 * the panel can support backlight control over the aux channel
@@ -319,7 +336,7 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
 	if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
 	    (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) &&
 	    !(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) {
-		DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
+		drm_dbg_kms(&i915->drm, "AUX Backlight Control Supported!\n");
 		return true;
 	}
 	return false;
@@ -329,8 +346,7 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
 {
 	struct intel_panel *panel = &intel_connector->panel;
 	struct intel_dp *intel_dp = enc_to_intel_dp(intel_connector->encoder);
-	struct drm_device *dev = intel_connector->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 
 	if (i915_modparams.enable_dpcd_backlight == 0 ||
 	    !intel_dp_aux_display_control_capable(intel_connector))
@@ -340,18 +356,18 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
 	 * There are a lot of machines that don't advertise the backlight
 	 * control interface to use properly in their VBIOS, :\
 	 */
-	if (dev_priv->vbt.backlight.type !=
+	if (i915->vbt.backlight.type !=
 	    INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE &&
 	    i915_modparams.enable_dpcd_backlight != 1 &&
 	    !drm_dp_has_quirk(&intel_dp->desc, intel_dp->edid_quirks,
 			      DP_QUIRK_FORCE_DPCD_BACKLIGHT)) {
-		DRM_DEV_INFO(dev->dev,
-			     "Panel advertises DPCD backlight support, but "
-			     "VBT disagrees. If your backlight controls "
-			     "don't work try booting with "
-			     "i915.enable_dpcd_backlight=1. If your machine "
-			     "needs this, please file a _new_ bug report on "
-			     "drm/i915, see " FDO_BUG_URL " for details.\n");
+		drm_info(&i915->drm,
+			 "Panel advertises DPCD backlight support, but "
+			 "VBT disagrees. If your backlight controls "
+			 "don't work try booting with "
+			 "i915.enable_dpcd_backlight=1. If your machine "
+			 "needs this, please file a _new_ bug report on "
+			 "drm/i915, see " FDO_BUG_URL " for details.\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
index a7defb37ab00..e4f1843170b7 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
@@ -34,9 +34,8 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE])
 		      link_status[3], link_status[4], link_status[5]);
 }
 
-static void
-intel_get_adjust_train(struct intel_dp *intel_dp,
-		       const u8 link_status[DP_LINK_STATUS_SIZE])
+void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
+			       const u8 link_status[DP_LINK_STATUS_SIZE])
 {
 	u8 v = 0;
 	u8 p = 0;
@@ -219,7 +218,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
 		voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
 
 		/* Update training set as requested by target */
-		intel_get_adjust_train(intel_dp, link_status);
+		intel_dp_get_adjust_train(intel_dp, link_status);
 		if (!intel_dp_update_link_train(intel_dp)) {
 			drm_err(&i915->drm,
 				"failed to update link training\n");
@@ -338,7 +337,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
 		}
 
 		/* Update training set as requested by target */
-		intel_get_adjust_train(intel_dp, link_status);
+		intel_dp_get_adjust_train(intel_dp, link_status);
 		if (!intel_dp_update_link_train(intel_dp)) {
 			drm_err(&i915->drm,
 				"failed to update link training\n");
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.h b/drivers/gpu/drm/i915/display/intel_dp_link_training.h
index 174566adcc92..01f1dabbb060 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.h
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.h
@@ -6,8 +6,12 @@
 #ifndef __INTEL_DP_LINK_TRAINING_H__
 #define __INTEL_DP_LINK_TRAINING_H__
 
+#include <drm/drm_dp_helper.h>
+
 struct intel_dp;
 
+void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
+			       const u8 link_status[DP_LINK_STATUS_SIZE]);
 void intel_dp_start_link_train(struct intel_dp *intel_dp);
 void intel_dp_stop_link_train(struct intel_dp *intel_dp);
 
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 44f3fd251ca1..4d2384650383 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -47,9 +47,9 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
 	struct intel_dp *intel_dp = &intel_mst->primary->dp;
 	struct intel_connector *connector =
 		to_intel_connector(conn_state->connector);
+	struct drm_i915_private *i915 = to_i915(connector->base.dev);
 	const struct drm_display_mode *adjusted_mode =
 		&crtc_state->hw.adjusted_mode;
-	void *port = connector->port;
 	bool constant_n = drm_dp_has_quirk(&intel_dp->desc, 0,
 					   DP_DPCD_QUIRK_CONSTANT_N);
 	int bpp, slots = -EINVAL;
@@ -65,7 +65,8 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
 						       false);
 
 		slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
-						      port, crtc_state->pbn, 0);
+						      connector->port,
+						      crtc_state->pbn, 0);
 		if (slots == -EDEADLK)
 			return slots;
 		if (slots >= 0)
@@ -73,7 +74,8 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
 	}
 
 	if (slots < 0) {
-		DRM_DEBUG_KMS("failed finding vcpi slots:%d\n", slots);
+		drm_dbg_kms(&i915->drm, "failed finding vcpi slots:%d\n",
+			    slots);
 		return slots;
 	}
 
@@ -88,56 +90,10 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
 	return 0;
 }
 
-/*
- * Iterate over all connectors and return the smallest transcoder in the MST
- * stream
- */
-static enum transcoder
-intel_dp_mst_master_trans_compute(struct intel_atomic_state *state,
-				  struct intel_dp *mst_port)
-{
-	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
-	struct intel_digital_connector_state *conn_state;
-	struct intel_connector *connector;
-	enum pipe ret = I915_MAX_PIPES;
-	int i;
-
-	if (INTEL_GEN(dev_priv) < 12)
-		return INVALID_TRANSCODER;
-
-	for_each_new_intel_connector_in_state(state, connector, conn_state, i) {
-		struct intel_crtc_state *crtc_state;
-		struct intel_crtc *crtc;
-
-		if (connector->mst_port != mst_port || !conn_state->base.crtc)
-			continue;
-
-		crtc = to_intel_crtc(conn_state->base.crtc);
-		crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
-		if (!crtc_state->uapi.active)
-			continue;
-
-		/*
-		 * Using crtc->pipe because crtc_state->cpu_transcoder is
-		 * computed, so others CRTCs could have non-computed
-		 * cpu_transcoder
-		 */
-		if (crtc->pipe < ret)
-			ret = crtc->pipe;
-	}
-
-	if (ret == I915_MAX_PIPES)
-		return INVALID_TRANSCODER;
-
-	/* Simple cast works because TGL don't have a eDP transcoder */
-	return (enum transcoder)ret;
-}
-
 static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 				       struct intel_crtc_state *pipe_config,
 				       struct drm_connector_state *conn_state)
 {
-	struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state);
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
 	struct intel_dp *intel_dp = &intel_mst->primary->dp;
@@ -147,7 +103,6 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 		to_intel_digital_connector_state(conn_state);
 	const struct drm_display_mode *adjusted_mode =
 		&pipe_config->hw.adjusted_mode;
-	void *port = connector->port;
 	struct link_config_limits limits;
 	int ret;
 
@@ -158,8 +113,7 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 	pipe_config->has_pch_encoder = false;
 
 	if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO)
-		pipe_config->has_audio =
-			drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, port);
+		pipe_config->has_audio = connector->port->has_audio;
 	else
 		pipe_config->has_audio =
 			intel_conn_state->force_audio == HDMI_AUDIO_ON;
@@ -201,7 +155,56 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 
 	intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
 
-	pipe_config->mst_master_transcoder = intel_dp_mst_master_trans_compute(state, intel_dp);
+	return 0;
+}
+
+/*
+ * Iterate over all connectors and return a mask of
+ * all CPU transcoders streaming over the same DP link.
+ */
+static unsigned int
+intel_dp_mst_transcoder_mask(struct intel_atomic_state *state,
+			     struct intel_dp *mst_port)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	const struct intel_digital_connector_state *conn_state;
+	struct intel_connector *connector;
+	u8 transcoders = 0;
+	int i;
+
+	if (INTEL_GEN(dev_priv) < 12)
+		return 0;
+
+	for_each_new_intel_connector_in_state(state, connector, conn_state, i) {
+		const struct intel_crtc_state *crtc_state;
+		struct intel_crtc *crtc;
+
+		if (connector->mst_port != mst_port || !conn_state->base.crtc)
+			continue;
+
+		crtc = to_intel_crtc(conn_state->base.crtc);
+		crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
+
+		if (!crtc_state->hw.active)
+			continue;
+
+		transcoders |= BIT(crtc_state->cpu_transcoder);
+	}
+
+	return transcoders;
+}
+
+static int intel_dp_mst_compute_config_late(struct intel_encoder *encoder,
+					    struct intel_crtc_state *crtc_state,
+					    struct drm_connector_state *conn_state)
+{
+	struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state);
+	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
+	struct intel_dp *intel_dp = &intel_mst->primary->dp;
+
+	/* lowest numbered transcoder will be designated master */
+	crtc_state->mst_master_transcoder =
+		ffs(intel_dp_mst_transcoder_mask(state, intel_dp)) - 1;
 
 	return 0;
 }
@@ -313,7 +316,8 @@ intel_dp_mst_atomic_check(struct drm_connector *connector,
 	return ret;
 }
 
-static void intel_mst_disable_dp(struct intel_encoder *encoder,
+static void intel_mst_disable_dp(struct intel_atomic_state *state,
+				 struct intel_encoder *encoder,
 				 const struct intel_crtc_state *old_crtc_state,
 				 const struct drm_connector_state *old_conn_state)
 {
@@ -322,22 +326,25 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
 	struct intel_dp *intel_dp = &intel_dig_port->dp;
 	struct intel_connector *connector =
 		to_intel_connector(old_conn_state->connector);
+	struct drm_i915_private *i915 = to_i915(connector->base.dev);
 	int ret;
 
-	DRM_DEBUG_KMS("active links %d\n", intel_dp->active_mst_links);
+	drm_dbg_kms(&i915->drm, "active links %d\n",
+		    intel_dp->active_mst_links);
 
 	drm_dp_mst_reset_vcpi_slots(&intel_dp->mst_mgr, connector->port);
 
 	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
 	if (ret) {
-		DRM_DEBUG_KMS("failed to update payload %d\n", ret);
+		drm_dbg_kms(&i915->drm, "failed to update payload %d\n", ret);
 	}
 	if (old_crtc_state->has_audio)
 		intel_audio_codec_disable(encoder,
 					  old_crtc_state, old_conn_state);
 }
 
-static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
+static void intel_mst_post_disable_dp(struct intel_atomic_state *state,
+				      struct intel_encoder *encoder,
 				      const struct intel_crtc_state *old_crtc_state,
 				      const struct drm_connector_state *old_conn_state)
 {
@@ -371,7 +378,8 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
 
 	if (intel_de_wait_for_set(dev_priv, intel_dp->regs.dp_tp_status,
 				  DP_TP_STATUS_ACT_SENT, 1))
-		DRM_ERROR("Timed out waiting for ACT sent when disabling\n");
+		drm_err(&dev_priv->drm,
+			"Timed out waiting for ACT sent when disabling\n");
 	drm_dp_check_act_status(&intel_dp->mst_mgr);
 
 	drm_dp_mst_deallocate_vcpi(&intel_dp->mst_mgr, connector->port);
@@ -402,13 +410,15 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
 
 	intel_mst->connector = NULL;
 	if (last_mst_stream)
-		intel_dig_port->base.post_disable(&intel_dig_port->base,
+		intel_dig_port->base.post_disable(state, &intel_dig_port->base,
 						  old_crtc_state, NULL);
 
-	DRM_DEBUG_KMS("active links %d\n", intel_dp->active_mst_links);
+	drm_dbg_kms(&dev_priv->drm, "active links %d\n",
+		    intel_dp->active_mst_links);
 }
 
-static void intel_mst_pre_pll_enable_dp(struct intel_encoder *encoder,
+static void intel_mst_pre_pll_enable_dp(struct intel_atomic_state *state,
+					struct intel_encoder *encoder,
 					const struct intel_crtc_state *pipe_config,
 					const struct drm_connector_state *conn_state)
 {
@@ -417,11 +427,12 @@ static void intel_mst_pre_pll_enable_dp(struct intel_encoder *encoder,
 	struct intel_dp *intel_dp = &intel_dig_port->dp;
 
 	if (intel_dp->active_mst_links == 0)
-		intel_dig_port->base.pre_pll_enable(&intel_dig_port->base,
+		intel_dig_port->base.pre_pll_enable(state, &intel_dig_port->base,
 						    pipe_config, NULL);
 }
 
-static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
+static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
+				    struct intel_encoder *encoder,
 				    const struct intel_crtc_state *pipe_config,
 				    const struct drm_connector_state *conn_state)
 {
@@ -445,7 +456,8 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
 		    INTEL_GEN(dev_priv) >= 12 && first_mst_stream &&
 		    !intel_dp_mst_is_master_trans(pipe_config));
 
-	DRM_DEBUG_KMS("active links %d\n", intel_dp->active_mst_links);
+	drm_dbg_kms(&dev_priv->drm, "active links %d\n",
+		    intel_dp->active_mst_links);
 
 	if (first_mst_stream)
 		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
@@ -453,7 +465,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
 	drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port, true);
 
 	if (first_mst_stream)
-		intel_dig_port->base.pre_enable(&intel_dig_port->base,
+		intel_dig_port->base.pre_enable(state, &intel_dig_port->base,
 						pipe_config, NULL);
 
 	ret = drm_dp_mst_allocate_vcpi(&intel_dp->mst_mgr,
@@ -461,7 +473,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
 				       pipe_config->pbn,
 				       pipe_config->dp_m_n.tu);
 	if (!ret)
-		DRM_ERROR("failed to allocate vcpi\n");
+		drm_err(&dev_priv->drm, "failed to allocate vcpi\n");
 
 	intel_dp->active_mst_links++;
 	temp = intel_de_read(dev_priv, intel_dp->regs.dp_tp_status);
@@ -477,14 +489,15 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
 	 * here for the following ones.
 	 */
 	if (INTEL_GEN(dev_priv) < 12 || !first_mst_stream)
-		intel_ddi_enable_pipe_clock(pipe_config);
+		intel_ddi_enable_pipe_clock(encoder, pipe_config);
 
 	intel_ddi_set_dp_msa(pipe_config, conn_state);
 
 	intel_dp_set_m_n(pipe_config, M1_N1);
 }
 
-static void intel_mst_enable_dp(struct intel_encoder *encoder,
+static void intel_mst_enable_dp(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
 				const struct intel_crtc_state *pipe_config,
 				const struct drm_connector_state *conn_state)
 {
@@ -495,15 +508,18 @@ static void intel_mst_enable_dp(struct intel_encoder *encoder,
 
 	drm_WARN_ON(&dev_priv->drm, pipe_config->has_pch_encoder);
 
+	intel_ddi_enable_transcoder_func(encoder, pipe_config);
+
 	intel_enable_pipe(pipe_config);
 
 	intel_crtc_vblank_on(pipe_config);
 
-	DRM_DEBUG_KMS("active links %d\n", intel_dp->active_mst_links);
+	drm_dbg_kms(&dev_priv->drm, "active links %d\n",
+		    intel_dp->active_mst_links);
 
 	if (intel_de_wait_for_set(dev_priv, intel_dp->regs.dp_tp_status,
 				  DP_TP_STATUS_ACT_SENT, 1))
-		DRM_ERROR("Timed out waiting for ACT sent\n");
+		drm_err(&dev_priv->drm, "Timed out waiting for ACT sent\n");
 
 	drm_dp_check_act_status(&intel_dp->mst_mgr);
 
@@ -786,6 +802,7 @@ intel_dp_create_fake_mst_encoder(struct intel_digital_port *intel_dig_port, enum
 	intel_encoder->pipe_mask = ~0;
 
 	intel_encoder->compute_config = intel_dp_mst_compute_config;
+	intel_encoder->compute_config_late = intel_dp_mst_compute_config_late;
 	intel_encoder->disable = intel_mst_disable_dp;
 	intel_encoder->post_disable = intel_mst_post_disable_dp;
 	intel_encoder->pre_pll_enable = intel_mst_pre_pll_enable_dp;
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 2d47f1f756a2..b45185b80bec 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -80,7 +80,7 @@ intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s)
 {
 	struct intel_atomic_state *state = to_intel_atomic_state(s);
 
-	WARN_ON(!drm_modeset_is_locked(&s->dev->mode_config.connection_mutex));
+	drm_WARN_ON(s->dev, !drm_modeset_is_locked(&s->dev->mode_config.connection_mutex));
 
 	if (!state->dpll_set) {
 		state->dpll_set = true;
@@ -979,7 +979,7 @@ hsw_ddi_spll_get_dpll(struct intel_atomic_state *state,
 	struct intel_crtc_state *crtc_state =
 		intel_atomic_get_new_crtc_state(state, crtc);
 
-	if (WARN_ON(crtc_state->port_clock / 2 != 135000))
+	if (drm_WARN_ON(crtc->base.dev, crtc_state->port_clock / 2 != 135000))
 		return NULL;
 
 	crtc_state->dpll_hw_state.spll = SPLL_PLL_ENABLE | SPLL_FREQ_1350MHz |
@@ -1616,7 +1616,7 @@ static int skl_ddi_wrpll_get_freq(struct drm_i915_private *i915,
 	dco_freq += ((pll_state->cfgcr1 & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) *
 		    ref_clock / 0x8000;
 
-	if (WARN_ON(p0 == 0 || p1 == 0 || p2 == 0))
+	if (drm_WARN_ON(&i915->drm, p0 == 0 || p1 == 0 || p2 == 0))
 		return 0;
 
 	return dco_freq / (p0 * p1 * p2 * 5);
@@ -2074,7 +2074,7 @@ bxt_ddi_hdmi_pll_dividers(struct intel_crtc_state *crtc_state,
 
 	clk_div->p1 = best_clock.p1;
 	clk_div->p2 = best_clock.p2;
-	WARN_ON(best_clock.m1 != 2);
+	drm_WARN_ON(&i915->drm, best_clock.m1 != 2);
 	clk_div->n = best_clock.n;
 	clk_div->m2_int = best_clock.m2 >> 22;
 	clk_div->m2_frac = best_clock.m2 & ((1 << 22) - 1);
diff --git a/drivers/gpu/drm/i915/display/intel_dsb.c b/drivers/gpu/drm/i915/display/intel_dsb.c
index d7a6bf2277df..29fec6a92d17 100644
--- a/drivers/gpu/drm/i915/display/intel_dsb.c
+++ b/drivers/gpu/drm/i915/display/intel_dsb.c
@@ -34,7 +34,7 @@
 #define DSB_BYTE_EN_SHIFT		20
 #define DSB_REG_VALUE_MASK		0xfffff
 
-static inline bool is_dsb_busy(struct intel_dsb *dsb)
+static bool is_dsb_busy(struct intel_dsb *dsb)
 {
 	struct intel_crtc *crtc = container_of(dsb, typeof(*crtc), dsb);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
@@ -43,7 +43,7 @@ static inline bool is_dsb_busy(struct intel_dsb *dsb)
 	return DSB_STATUS & intel_de_read(dev_priv, DSB_CTRL(pipe, dsb->id));
 }
 
-static inline bool intel_dsb_enable_engine(struct intel_dsb *dsb)
+static bool intel_dsb_enable_engine(struct intel_dsb *dsb)
 {
 	struct intel_crtc *crtc = container_of(dsb, typeof(*crtc), dsb);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
@@ -63,7 +63,7 @@ static inline bool intel_dsb_enable_engine(struct intel_dsb *dsb)
 	return true;
 }
 
-static inline bool intel_dsb_disable_engine(struct intel_dsb *dsb)
+static bool intel_dsb_disable_engine(struct intel_dsb *dsb)
 {
 	struct intel_crtc *crtc = container_of(dsb, typeof(*crtc), dsb);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
index a2a937109a5a..afa4e6817e8c 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi.c
@@ -31,20 +31,21 @@ int intel_dsi_tlpx_ns(const struct intel_dsi *intel_dsi)
 
 int intel_dsi_get_modes(struct drm_connector *connector)
 {
+	struct drm_i915_private *i915 = to_i915(connector->dev);
 	struct intel_connector *intel_connector = to_intel_connector(connector);
 	struct drm_display_mode *mode;
 
-	DRM_DEBUG_KMS("\n");
+	drm_dbg_kms(&i915->drm, "\n");
 
 	if (!intel_connector->panel.fixed_mode) {
-		DRM_DEBUG_KMS("no fixed mode\n");
+		drm_dbg_kms(&i915->drm, "no fixed mode\n");
 		return 0;
 	}
 
 	mode = drm_mode_duplicate(connector->dev,
 				  intel_connector->panel.fixed_mode);
 	if (!mode) {
-		DRM_DEBUG_KMS("drm_mode_duplicate failed\n");
+		drm_dbg_kms(&i915->drm, "drm_mode_duplicate failed\n");
 		return 0;
 	}
 
@@ -60,7 +61,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
 	const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
 	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
 
-	DRM_DEBUG_KMS("\n");
+	drm_dbg_kms(&dev_priv->drm, "\n");
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
index 574dcfec9577..eed037ec0b29 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
@@ -121,7 +121,7 @@ struct i2c_adapter_lookup {
 #define  ICL_GPIO_DDPA_CTRLCLK_2	8
 #define  ICL_GPIO_DDPA_CTRLDATA_2	9
 
-static inline enum port intel_dsi_seq_port_to_port(u8 port)
+static enum port intel_dsi_seq_port_to_port(u8 port)
 {
 	return port ? PORT_C : PORT_A;
 }
@@ -453,8 +453,7 @@ static inline void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi,
 
 static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
 {
-	struct drm_device *drm_dev = intel_dsi->base.base.dev;
-	struct device *dev = &drm_dev->pdev->dev;
+	struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev);
 	struct i2c_adapter *adapter;
 	struct i2c_msg msg;
 	int ret;
@@ -471,7 +470,7 @@ static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
 
 	adapter = i2c_get_adapter(intel_dsi->i2c_bus_num);
 	if (!adapter) {
-		DRM_DEV_ERROR(dev, "Cannot find a valid i2c bus for xfer\n");
+		drm_err(&i915->drm, "Cannot find a valid i2c bus for xfer\n");
 		goto err_bus;
 	}
 
@@ -489,9 +488,9 @@ static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
 
 	ret = i2c_transfer(adapter, &msg, 1);
 	if (ret < 0)
-		DRM_DEV_ERROR(dev,
-			      "Failed to xfer payload of size (%u) to reg (%u)\n",
-			      payload_size, reg_offset);
+		drm_err(&i915->drm,
+			"Failed to xfer payload of size (%u) to reg (%u)\n",
+			payload_size, reg_offset);
 
 	kfree(payload_data);
 err_alloc:
diff --git a/drivers/gpu/drm/i915/display/intel_dvo.c b/drivers/gpu/drm/i915/display/intel_dvo.c
index 341d5ce8b062..5cd09034519b 100644
--- a/drivers/gpu/drm/i915/display/intel_dvo.c
+++ b/drivers/gpu/drm/i915/display/intel_dvo.c
@@ -183,7 +183,8 @@ static void intel_dvo_get_config(struct intel_encoder *encoder,
 	pipe_config->hw.adjusted_mode.crtc_clock = pipe_config->port_clock;
 }
 
-static void intel_disable_dvo(struct intel_encoder *encoder,
+static void intel_disable_dvo(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *old_crtc_state,
 			      const struct drm_connector_state *old_conn_state)
 {
@@ -197,7 +198,8 @@ static void intel_disable_dvo(struct intel_encoder *encoder,
 	intel_de_read(dev_priv, dvo_reg);
 }
 
-static void intel_enable_dvo(struct intel_encoder *encoder,
+static void intel_enable_dvo(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
 			     const struct intel_crtc_state *pipe_config,
 			     const struct drm_connector_state *conn_state)
 {
@@ -272,7 +274,8 @@ static int intel_dvo_compute_config(struct intel_encoder *encoder,
 	return 0;
 }
 
-static void intel_dvo_pre_enable(struct intel_encoder *encoder,
+static void intel_dvo_pre_enable(struct intel_atomic_state *state,
+				 struct intel_encoder *encoder,
 				 const struct intel_crtc_state *pipe_config,
 				 const struct drm_connector_state *conn_state)
 {
diff --git a/drivers/gpu/drm/i915/display/intel_fbc.c b/drivers/gpu/drm/i915/display/intel_fbc.c
index 2e5d835a9eaa..c6afa10e814c 100644
--- a/drivers/gpu/drm/i915/display/intel_fbc.c
+++ b/drivers/gpu/drm/i915/display/intel_fbc.c
@@ -104,7 +104,7 @@ static void i8xx_fbc_deactivate(struct drm_i915_private *dev_priv)
 	/* Wait for compressing bit to clear */
 	if (intel_de_wait_for_clear(dev_priv, FBC_STATUS,
 				    FBC_STAT_COMPRESSING, 10)) {
-		DRM_DEBUG_KMS("FBC idle timed out\n");
+		drm_dbg_kms(&dev_priv->drm, "FBC idle timed out\n");
 		return;
 	}
 }
@@ -485,8 +485,8 @@ static int intel_fbc_alloc_cfb(struct drm_i915_private *dev_priv,
 	if (!ret)
 		goto err_llb;
 	else if (ret > 1) {
-		DRM_INFO("Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.\n");
-
+		drm_info_once(&dev_priv->drm,
+			      "Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.\n");
 	}
 
 	fbc->threshold = ret;
@@ -521,8 +521,9 @@ static int intel_fbc_alloc_cfb(struct drm_i915_private *dev_priv,
 			       dev_priv->dsm.start + compressed_llb->start);
 	}
 
-	DRM_DEBUG_KMS("reserved %llu bytes of contiguous stolen space for FBC, threshold: %d\n",
-		      fbc->compressed_fb.size, fbc->threshold);
+	drm_dbg_kms(&dev_priv->drm,
+		    "reserved %llu bytes of contiguous stolen space for FBC, threshold: %d\n",
+		    fbc->compressed_fb.size, fbc->threshold);
 
 	return 0;
 
@@ -531,7 +532,7 @@ static int intel_fbc_alloc_cfb(struct drm_i915_private *dev_priv,
 	i915_gem_stolen_remove_node(dev_priv, &fbc->compressed_fb);
 err_llb:
 	if (drm_mm_initialized(&dev_priv->mm.stolen))
-		pr_info_once("drm: not enough stolen space for compressed buffer (need %d more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.\n", size);
+		drm_info_once(&dev_priv->drm, "not enough stolen space for compressed buffer (need %d more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.\n", size);
 	return -ENOSPC;
 }
 
@@ -606,6 +607,19 @@ static bool pixel_format_is_valid(struct drm_i915_private *dev_priv,
 	}
 }
 
+static bool rotation_is_valid(struct drm_i915_private *dev_priv,
+			      u32 pixel_format, unsigned int rotation)
+{
+	if (INTEL_GEN(dev_priv) >= 9 && pixel_format == DRM_FORMAT_RGB565 &&
+	    drm_rotation_90_or_270(rotation))
+		return false;
+	else if (INTEL_GEN(dev_priv) <= 4 && !IS_G4X(dev_priv) &&
+		 rotation != DRM_MODE_ROTATE_0)
+		return false;
+
+	return true;
+}
+
 /*
  * For some reason, the hardware tracking starts looking at whatever we
  * programmed as the display plane base address register. It does not look at
@@ -640,6 +654,22 @@ static bool intel_fbc_hw_tracking_covers_screen(struct intel_crtc *crtc)
 	return effective_w <= max_w && effective_h <= max_h;
 }
 
+static bool tiling_is_valid(struct drm_i915_private *dev_priv,
+			    uint64_t modifier)
+{
+	switch (modifier) {
+	case DRM_FORMAT_MOD_LINEAR:
+		if (INTEL_GEN(dev_priv) >= 9)
+			return true;
+		return false;
+	case I915_FORMAT_MOD_X_TILED:
+	case I915_FORMAT_MOD_Y_TILED:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static void intel_fbc_update_state_cache(struct intel_crtc *crtc,
 					 const struct intel_crtc_state *crtc_state,
 					 const struct intel_plane_state *plane_state)
@@ -673,6 +703,7 @@ static void intel_fbc_update_state_cache(struct intel_crtc *crtc,
 
 	cache->fb.format = fb->format;
 	cache->fb.stride = fb->pitches[0];
+	cache->fb.modifier = fb->modifier;
 
 	drm_WARN_ON(&dev_priv->drm, plane_state->flags & PLANE_HAS_FENCE &&
 		    !plane_state->vma->fence);
@@ -746,29 +777,39 @@ static bool intel_fbc_can_activate(struct intel_crtc *crtc)
 		return false;
 	}
 
-	/* The use of a CPU fence is mandatory in order to detect writes
-	 * by the CPU to the scanout and trigger updates to the FBC.
+	/* The use of a CPU fence is one of two ways to detect writes by the
+	 * CPU to the scanout and trigger updates to the FBC.
+	 *
+	 * The other method is by software tracking (see
+	 * intel_fbc_invalidate/flush()), it will manually notify FBC and nuke
+	 * the current compressed buffer and recompress it.
 	 *
 	 * Note that is possible for a tiled surface to be unmappable (and
-	 * so have no fence associated with it) due to aperture constaints
+	 * so have no fence associated with it) due to aperture constraints
 	 * at the time of pinning.
 	 *
 	 * FIXME with 90/270 degree rotation we should use the fence on
 	 * the normal GTT view (the rotated view doesn't even have a
 	 * fence). Would need changes to the FBC fence Y offset as well.
-	 * For now this will effecively disable FBC with 90/270 degree
+	 * For now this will effectively disable FBC with 90/270 degree
 	 * rotation.
 	 */
-	if (cache->fence_id < 0) {
+	if (INTEL_GEN(dev_priv) < 9 && cache->fence_id < 0) {
 		fbc->no_fbc_reason = "framebuffer not tiled or fenced";
 		return false;
 	}
-	if (INTEL_GEN(dev_priv) <= 4 && !IS_G4X(dev_priv) &&
-	    cache->plane.rotation != DRM_MODE_ROTATE_0) {
+
+	if (!rotation_is_valid(dev_priv, cache->fb.format->format,
+			       cache->plane.rotation)) {
 		fbc->no_fbc_reason = "rotation unsupported";
 		return false;
 	}
 
+	if (!tiling_is_valid(dev_priv, cache->fb.modifier)) {
+		fbc->no_fbc_reason = "tiling unsupported";
+		return false;
+	}
+
 	if (!stride_is_valid(dev_priv, cache->fb.stride)) {
 		fbc->no_fbc_reason = "framebuffer stride not supported";
 		return false;
@@ -948,7 +989,8 @@ static void __intel_fbc_disable(struct drm_i915_private *dev_priv)
 	drm_WARN_ON(&dev_priv->drm, !fbc->crtc);
 	drm_WARN_ON(&dev_priv->drm, fbc->active);
 
-	DRM_DEBUG_KMS("Disabling FBC on pipe %c\n", pipe_name(crtc->pipe));
+	drm_dbg_kms(&dev_priv->drm, "Disabling FBC on pipe %c\n",
+		    pipe_name(crtc->pipe));
 
 	__intel_fbc_cleanup_cfb(dev_priv);
 
@@ -1176,7 +1218,8 @@ void intel_fbc_enable(struct intel_atomic_state *state,
 	else
 		cache->gen9_wa_cfb_stride = 0;
 
-	DRM_DEBUG_KMS("Enabling FBC on pipe %c\n", pipe_name(crtc->pipe));
+	drm_dbg_kms(&dev_priv->drm, "Enabling FBC on pipe %c\n",
+		    pipe_name(crtc->pipe));
 	fbc->no_fbc_reason = "FBC enabled but not active yet\n";
 
 	fbc->crtc = crtc;
@@ -1238,7 +1281,7 @@ static void intel_fbc_underrun_work_fn(struct work_struct *work)
 	if (fbc->underrun_detected || !fbc->crtc)
 		goto out;
 
-	DRM_DEBUG_KMS("Disabling FBC due to FIFO underrun.\n");
+	drm_dbg_kms(&dev_priv->drm, "Disabling FBC due to FIFO underrun.\n");
 	fbc->underrun_detected = true;
 
 	intel_fbc_deactivate(dev_priv, "FIFO underrun");
@@ -1264,7 +1307,8 @@ int intel_fbc_reset_underrun(struct drm_i915_private *dev_priv)
 		return ret;
 
 	if (dev_priv->fbc.underrun_detected) {
-		DRM_DEBUG_KMS("Re-allowing FBC after fifo underrun\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "Re-allowing FBC after fifo underrun\n");
 		dev_priv->fbc.no_fbc_reason = "FIFO underrun cleared";
 	}
 
@@ -1335,7 +1379,8 @@ static bool need_fbc_vtd_wa(struct drm_i915_private *dev_priv)
 	/* WaFbcTurnOffFbcWhenHyperVisorIsUsed:skl,bxt */
 	if (intel_vtd_active() &&
 	    (IS_SKYLAKE(dev_priv) || IS_BROXTON(dev_priv))) {
-		DRM_INFO("Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled\n");
+		drm_info(&dev_priv->drm,
+			 "Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled\n");
 		return true;
 	}
 
@@ -1363,8 +1408,8 @@ void intel_fbc_init(struct drm_i915_private *dev_priv)
 		mkwrite_device_info(dev_priv)->display.has_fbc = false;
 
 	i915_modparams.enable_fbc = intel_sanitize_fbc_option(dev_priv);
-	DRM_DEBUG_KMS("Sanitized enable_fbc value: %d\n",
-		      i915_modparams.enable_fbc);
+	drm_dbg_kms(&dev_priv->drm, "Sanitized enable_fbc value: %d\n",
+		    i915_modparams.enable_fbc);
 
 	if (!HAS_FBC(dev_priv)) {
 		fbc->no_fbc_reason = "unsupported by this chipset";
diff --git a/drivers/gpu/drm/i915/display/intel_fbdev.c b/drivers/gpu/drm/i915/display/intel_fbdev.c
index 3bc804212a99..bd39eb6a21b8 100644
--- a/drivers/gpu/drm/i915/display/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/display/intel_fbdev.c
@@ -146,7 +146,7 @@ static int intelfb_alloc(struct drm_fb_helper *helper,
 	if (IS_ERR(obj))
 		obj = i915_gem_object_create_shmem(dev_priv, size);
 	if (IS_ERR(obj)) {
-		DRM_ERROR("failed to allocate framebuffer\n");
+		drm_err(&dev_priv->drm, "failed to allocate framebuffer\n");
 		return PTR_ERR(obj);
 	}
 
@@ -183,21 +183,23 @@ static int intelfb_create(struct drm_fb_helper *helper,
 	if (intel_fb &&
 	    (sizes->fb_width > intel_fb->base.width ||
 	     sizes->fb_height > intel_fb->base.height)) {
-		DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
-			      " releasing it\n",
-			      intel_fb->base.width, intel_fb->base.height,
-			      sizes->fb_width, sizes->fb_height);
+		drm_dbg_kms(&dev_priv->drm,
+			    "BIOS fb too small (%dx%d), we require (%dx%d),"
+			    " releasing it\n",
+			    intel_fb->base.width, intel_fb->base.height,
+			    sizes->fb_width, sizes->fb_height);
 		drm_framebuffer_put(&intel_fb->base);
 		intel_fb = ifbdev->fb = NULL;
 	}
 	if (!intel_fb || drm_WARN_ON(dev, !intel_fb_obj(&intel_fb->base))) {
-		DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "no BIOS fb, allocating a new one\n");
 		ret = intelfb_alloc(helper, sizes);
 		if (ret)
 			return ret;
 		intel_fb = ifbdev->fb;
 	} else {
-		DRM_DEBUG_KMS("re-using BIOS fb\n");
+		drm_dbg_kms(&dev_priv->drm, "re-using BIOS fb\n");
 		prealloc = true;
 		sizes->fb_width = intel_fb->base.width;
 		sizes->fb_height = intel_fb->base.height;
@@ -220,7 +222,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
 
 	info = drm_fb_helper_alloc_fbi(helper);
 	if (IS_ERR(info)) {
-		DRM_ERROR("Failed to allocate fb_info\n");
+		drm_err(&dev_priv->drm, "Failed to allocate fb_info\n");
 		ret = PTR_ERR(info);
 		goto out_unpin;
 	}
@@ -240,7 +242,8 @@ static int intelfb_create(struct drm_fb_helper *helper,
 
 	vaddr = i915_vma_pin_iomap(vma);
 	if (IS_ERR(vaddr)) {
-		DRM_ERROR("Failed to remap framebuffer into virtual memory\n");
+		drm_err(&dev_priv->drm,
+			"Failed to remap framebuffer into virtual memory\n");
 		ret = PTR_ERR(vaddr);
 		goto out_unpin;
 	}
@@ -258,9 +261,9 @@ static int intelfb_create(struct drm_fb_helper *helper,
 
 	/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
 
-	DRM_DEBUG_KMS("allocated %dx%d fb: 0x%08x\n",
-		      ifbdev->fb->base.width, ifbdev->fb->base.height,
-		      i915_ggtt_offset(vma));
+	drm_dbg_kms(&dev_priv->drm, "allocated %dx%d fb: 0x%08x\n",
+		    ifbdev->fb->base.width, ifbdev->fb->base.height,
+		    i915_ggtt_offset(vma));
 	ifbdev->vma = vma;
 	ifbdev->vma_flags = flags;
 
@@ -309,6 +312,7 @@ static void intel_fbdev_destroy(struct intel_fbdev *ifbdev)
 static bool intel_fbdev_init_bios(struct drm_device *dev,
 				 struct intel_fbdev *ifbdev)
 {
+	struct drm_i915_private *i915 = to_i915(dev);
 	struct intel_framebuffer *fb = NULL;
 	struct drm_crtc *crtc;
 	struct intel_crtc *intel_crtc;
@@ -321,21 +325,24 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
 		intel_crtc = to_intel_crtc(crtc);
 
 		if (!crtc->state->active || !obj) {
-			DRM_DEBUG_KMS("pipe %c not active or no fb, skipping\n",
-				      pipe_name(intel_crtc->pipe));
+			drm_dbg_kms(&i915->drm,
+				    "pipe %c not active or no fb, skipping\n",
+				    pipe_name(intel_crtc->pipe));
 			continue;
 		}
 
 		if (obj->base.size > max_size) {
-			DRM_DEBUG_KMS("found possible fb from plane %c\n",
-				      pipe_name(intel_crtc->pipe));
+			drm_dbg_kms(&i915->drm,
+				    "found possible fb from plane %c\n",
+				    pipe_name(intel_crtc->pipe));
 			fb = to_intel_framebuffer(crtc->primary->state->fb);
 			max_size = obj->base.size;
 		}
 	}
 
 	if (!fb) {
-		DRM_DEBUG_KMS("no active fbs found, not using BIOS config\n");
+		drm_dbg_kms(&i915->drm,
+			    "no active fbs found, not using BIOS config\n");
 		goto out;
 	}
 
@@ -346,13 +353,14 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
 		intel_crtc = to_intel_crtc(crtc);
 
 		if (!crtc->state->active) {
-			DRM_DEBUG_KMS("pipe %c not active, skipping\n",
-				      pipe_name(intel_crtc->pipe));
+			drm_dbg_kms(&i915->drm,
+				    "pipe %c not active, skipping\n",
+				    pipe_name(intel_crtc->pipe));
 			continue;
 		}
 
-		DRM_DEBUG_KMS("checking plane %c for BIOS fb\n",
-			      pipe_name(intel_crtc->pipe));
+		drm_dbg_kms(&i915->drm, "checking plane %c for BIOS fb\n",
+			    pipe_name(intel_crtc->pipe));
 
 		/*
 		 * See if the plane fb we found above will fit on this
@@ -362,9 +370,10 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
 		cur_size = crtc->state->adjusted_mode.crtc_hdisplay;
 		cur_size = cur_size * fb->base.format->cpp[0];
 		if (fb->base.pitches[0] < cur_size) {
-			DRM_DEBUG_KMS("fb not wide enough for plane %c (%d vs %d)\n",
-				      pipe_name(intel_crtc->pipe),
-				      cur_size, fb->base.pitches[0]);
+			drm_dbg_kms(&i915->drm,
+				    "fb not wide enough for plane %c (%d vs %d)\n",
+				    pipe_name(intel_crtc->pipe),
+				    cur_size, fb->base.pitches[0]);
 			fb = NULL;
 			break;
 		}
@@ -372,28 +381,32 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
 		cur_size = crtc->state->adjusted_mode.crtc_vdisplay;
 		cur_size = intel_fb_align_height(&fb->base, 0, cur_size);
 		cur_size *= fb->base.pitches[0];
-		DRM_DEBUG_KMS("pipe %c area: %dx%d, bpp: %d, size: %d\n",
-			      pipe_name(intel_crtc->pipe),
-			      crtc->state->adjusted_mode.crtc_hdisplay,
-			      crtc->state->adjusted_mode.crtc_vdisplay,
-			      fb->base.format->cpp[0] * 8,
-			      cur_size);
+		drm_dbg_kms(&i915->drm,
+			    "pipe %c area: %dx%d, bpp: %d, size: %d\n",
+			    pipe_name(intel_crtc->pipe),
+			    crtc->state->adjusted_mode.crtc_hdisplay,
+			    crtc->state->adjusted_mode.crtc_vdisplay,
+			    fb->base.format->cpp[0] * 8,
+			    cur_size);
 
 		if (cur_size > max_size) {
-			DRM_DEBUG_KMS("fb not big enough for plane %c (%d vs %d)\n",
-				      pipe_name(intel_crtc->pipe),
-				      cur_size, max_size);
+			drm_dbg_kms(&i915->drm,
+				    "fb not big enough for plane %c (%d vs %d)\n",
+				    pipe_name(intel_crtc->pipe),
+				    cur_size, max_size);
 			fb = NULL;
 			break;
 		}
 
-		DRM_DEBUG_KMS("fb big enough for plane %c (%d >= %d)\n",
-			      pipe_name(intel_crtc->pipe),
-			      max_size, cur_size);
+		drm_dbg_kms(&i915->drm,
+			    "fb big enough for plane %c (%d >= %d)\n",
+			    pipe_name(intel_crtc->pipe),
+			    max_size, cur_size);
 	}
 
 	if (!fb) {
-		DRM_DEBUG_KMS("BIOS fb not suitable for all pipes, not using\n");
+		drm_dbg_kms(&i915->drm,
+			    "BIOS fb not suitable for all pipes, not using\n");
 		goto out;
 	}
 
@@ -415,7 +428,7 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
 	}
 
 
-	DRM_DEBUG_KMS("using BIOS fb for initial console\n");
+	drm_dbg_kms(&i915->drm, "using BIOS fb for initial console\n");
 	return true;
 
 out:
@@ -522,8 +535,9 @@ void intel_fbdev_fini(struct drm_i915_private *dev_priv)
  * processing, fbdev will perform a full connector reprobe if a hotplug event
  * was received while HPD was suspended.
  */
-static void intel_fbdev_hpd_set_suspend(struct intel_fbdev *ifbdev, int state)
+static void intel_fbdev_hpd_set_suspend(struct drm_i915_private *i915, int state)
 {
+	struct intel_fbdev *ifbdev = i915->fbdev;
 	bool send_hpd = false;
 
 	mutex_lock(&ifbdev->hpd_lock);
@@ -533,7 +547,7 @@ static void intel_fbdev_hpd_set_suspend(struct intel_fbdev *ifbdev, int state)
 	mutex_unlock(&ifbdev->hpd_lock);
 
 	if (send_hpd) {
-		DRM_DEBUG_KMS("Handling delayed fbcon HPD event\n");
+		drm_dbg_kms(&i915->drm, "Handling delayed fbcon HPD event\n");
 		drm_fb_helper_hotplug_event(&ifbdev->helper);
 	}
 }
@@ -588,7 +602,7 @@ void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous
 	drm_fb_helper_set_suspend(&ifbdev->helper, state);
 	console_unlock();
 
-	intel_fbdev_hpd_set_suspend(ifbdev, state);
+	intel_fbdev_hpd_set_suspend(dev_priv, state);
 }
 
 void intel_fbdev_output_poll_changed(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/display/intel_frontbuffer.c b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
index 6cb02c912acc..2979ed2588eb 100644
--- a/drivers/gpu/drm/i915/display/intel_frontbuffer.c
+++ b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
@@ -302,12 +302,14 @@ void intel_frontbuffer_track(struct intel_frontbuffer *old,
 		     BITS_PER_TYPE(atomic_t));
 
 	if (old) {
-		WARN_ON(!(atomic_read(&old->bits) & frontbuffer_bits));
+		drm_WARN_ON(old->obj->base.dev,
+			    !(atomic_read(&old->bits) & frontbuffer_bits));
 		atomic_andnot(frontbuffer_bits, &old->bits);
 	}
 
 	if (new) {
-		WARN_ON(atomic_read(&new->bits) & frontbuffer_bits);
+		drm_WARN_ON(new->obj->base.dev,
+			    atomic_read(&new->bits) & frontbuffer_bits);
 		atomic_or(frontbuffer_bits, &new->bits);
 	}
 }
diff --git a/drivers/gpu/drm/i915/display/intel_global_state.c b/drivers/gpu/drm/i915/display/intel_global_state.c
index a0cc894c3868..212d4ee68205 100644
--- a/drivers/gpu/drm/i915/display/intel_global_state.c
+++ b/drivers/gpu/drm/i915/display/intel_global_state.c
@@ -64,13 +64,14 @@ static void assert_global_state_read_locked(struct intel_atomic_state *state)
 			return;
 	}
 
-	WARN(1, "Global state not read locked\n");
+	drm_WARN(&dev_priv->drm, 1, "Global state not read locked\n");
 }
 
 struct intel_global_state *
 intel_atomic_get_global_obj_state(struct intel_atomic_state *state,
 				  struct intel_global_obj *obj)
 {
+	struct drm_i915_private *i915 = to_i915(state->base.dev);
 	int index, num_objs, i;
 	size_t size;
 	struct __intel_global_objs_state *arr;
@@ -106,8 +107,8 @@ intel_atomic_get_global_obj_state(struct intel_atomic_state *state,
 
 	state->num_global_objs = num_objs;
 
-	DRM_DEBUG_ATOMIC("Added new global object %p state %p to %p\n",
-			 obj, obj_state, state);
+	drm_dbg_atomic(&i915->drm, "Added new global object %p state %p to %p\n",
+		       obj, obj_state, state);
 
 	return obj_state;
 }
@@ -147,7 +148,7 @@ void intel_atomic_swap_global_state(struct intel_atomic_state *state)
 
 	for_each_oldnew_global_obj_in_state(state, obj, old_obj_state,
 					    new_obj_state, i) {
-		WARN_ON(obj->state != old_obj_state);
+		drm_WARN_ON(&dev_priv->drm, obj->state != old_obj_state);
 
 		/*
 		 * If the new state wasn't modified (and properly
diff --git a/drivers/gpu/drm/i915/display/intel_gmbus.c b/drivers/gpu/drm/i915/display/intel_gmbus.c
index 1fd3a5a6296b..a8d119b6b45c 100644
--- a/drivers/gpu/drm/i915/display/intel_gmbus.c
+++ b/drivers/gpu/drm/i915/display/intel_gmbus.c
@@ -379,8 +379,7 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv)
 	return ret;
 }
 
-static inline
-unsigned int gmbus_max_xfer_size(struct drm_i915_private *dev_priv)
+static unsigned int gmbus_max_xfer_size(struct drm_i915_private *dev_priv)
 {
 	return INTEL_GEN(dev_priv) >= 9 ? GEN9_GMBUS_BYTE_COUNT_MAX :
 	       GMBUS_BYTE_COUNT_MAX;
diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
index ee0f27ea2810..2cbc4619b4ce 100644
--- a/drivers/gpu/drm/i915/display/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
@@ -109,18 +109,16 @@ bool intel_hdcp2_capable(struct intel_connector *connector)
 	return capable;
 }
 
-static inline
-bool intel_hdcp_in_use(struct drm_i915_private *dev_priv,
-		       enum transcoder cpu_transcoder, enum port port)
+static bool intel_hdcp_in_use(struct drm_i915_private *dev_priv,
+			      enum transcoder cpu_transcoder, enum port port)
 {
 	return intel_de_read(dev_priv,
 	                     HDCP_STATUS(dev_priv, cpu_transcoder, port)) &
 	       HDCP_STATUS_ENC;
 }
 
-static inline
-bool intel_hdcp2_in_use(struct drm_i915_private *dev_priv,
-			enum transcoder cpu_transcoder, enum port port)
+static bool intel_hdcp2_in_use(struct drm_i915_private *dev_priv,
+			       enum transcoder cpu_transcoder, enum port port)
 {
 	return intel_de_read(dev_priv,
 	                     HDCP2_STATUS(dev_priv, cpu_transcoder, port)) &
@@ -853,8 +851,7 @@ static int _intel_hdcp_enable(struct intel_connector *connector)
 	return ret;
 }
 
-static inline
-struct intel_connector *intel_hdcp_to_connector(struct intel_hdcp *hdcp)
+static struct intel_connector *intel_hdcp_to_connector(struct intel_hdcp *hdcp)
 {
 	return container_of(hdcp, struct intel_connector, hdcp);
 }
@@ -1391,6 +1388,7 @@ static
 int hdcp2_propagate_stream_management_info(struct intel_connector *connector)
 {
 	struct intel_digital_port *intel_dig_port = intel_attached_dig_port(connector);
+	struct drm_i915_private *i915 = to_i915(connector->base.dev);
 	struct intel_hdcp *hdcp = &connector->hdcp;
 	union {
 		struct hdcp2_rep_stream_manage stream_manage;
@@ -1431,7 +1429,7 @@ int hdcp2_propagate_stream_management_info(struct intel_connector *connector)
 	hdcp->seq_num_m++;
 
 	if (hdcp->seq_num_m > HDCP_2_2_SEQ_NUM_MAX) {
-		DRM_DEBUG_KMS("seq_num_m roll over.\n");
+		drm_dbg_kms(&i915->drm, "seq_num_m roll over.\n");
 		return -1;
 	}
 
@@ -1855,8 +1853,7 @@ static const struct component_ops i915_hdcp_component_ops = {
 	.unbind = i915_hdcp_component_unbind,
 };
 
-static inline
-enum mei_fw_ddi intel_get_mei_fw_ddi_index(enum port port)
+static enum mei_fw_ddi intel_get_mei_fw_ddi_index(enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -1868,8 +1865,7 @@ enum mei_fw_ddi intel_get_mei_fw_ddi_index(enum port port)
 	}
 }
 
-static inline
-enum mei_fw_tc intel_get_mei_fw_tc(enum transcoder cpu_transcoder)
+static enum mei_fw_tc intel_get_mei_fw_tc(enum transcoder cpu_transcoder)
 {
 	switch (cpu_transcoder) {
 	case TRANSCODER_A ... TRANSCODER_D:
@@ -1879,8 +1875,8 @@ enum mei_fw_tc intel_get_mei_fw_tc(enum transcoder cpu_transcoder)
 	}
 }
 
-static inline int initialize_hdcp_port_data(struct intel_connector *connector,
-					    const struct intel_hdcp_shim *shim)
+static int initialize_hdcp_port_data(struct intel_connector *connector,
+				     const struct intel_hdcp_shim *shim)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
 	struct intel_hdcp *hdcp = &connector->hdcp;
@@ -2075,7 +2071,8 @@ int intel_hdcp_disable(struct intel_connector *connector)
 	return ret;
 }
 
-void intel_hdcp_update_pipe(struct intel_encoder *encoder,
+void intel_hdcp_update_pipe(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
 			    const struct intel_crtc_state *crtc_state,
 			    const struct drm_connector_state *conn_state)
 {
diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.h b/drivers/gpu/drm/i915/display/intel_hdcp.h
index 7c12ad609b1f..86bbaec120cc 100644
--- a/drivers/gpu/drm/i915/display/intel_hdcp.h
+++ b/drivers/gpu/drm/i915/display/intel_hdcp.h
@@ -11,6 +11,7 @@
 struct drm_connector;
 struct drm_connector_state;
 struct drm_i915_private;
+struct intel_atomic_state;
 struct intel_connector;
 struct intel_crtc_state;
 struct intel_encoder;
@@ -26,7 +27,8 @@ int intel_hdcp_init(struct intel_connector *connector,
 int intel_hdcp_enable(struct intel_connector *connector,
 		      enum transcoder cpu_transcoder, u8 content_type);
 int intel_hdcp_disable(struct intel_connector *connector);
-void intel_hdcp_update_pipe(struct intel_encoder *encoder,
+void intel_hdcp_update_pipe(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
 			    const struct intel_crtc_state *crtc_state,
 			    const struct drm_connector_state *conn_state);
 bool is_hdcp_supported(struct drm_i915_private *dev_priv, enum port port);
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 821411b93dac..010f37240710 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -44,7 +44,6 @@
 #include "intel_audio.h"
 #include "intel_connector.h"
 #include "intel_ddi.h"
-#include "intel_display_debugfs.h"
 #include "intel_display_types.h"
 #include "intel_dp.h"
 #include "intel_dpio_phy.h"
@@ -707,13 +706,15 @@ void intel_read_infoframe(struct intel_encoder *encoder,
 	/* see comment above for the reason for this offset */
 	ret = hdmi_infoframe_unpack(frame, buffer + 1, sizeof(buffer) - 1);
 	if (ret) {
-		DRM_DEBUG_KMS("Failed to unpack infoframe type 0x%02x\n", type);
+		drm_dbg_kms(encoder->base.dev,
+			    "Failed to unpack infoframe type 0x%02x\n", type);
 		return;
 	}
 
 	if (frame->any.type != type)
-		DRM_DEBUG_KMS("Found the wrong infoframe type 0x%x (expected 0x%02x)\n",
-			      frame->any.type, type);
+		drm_dbg_kms(encoder->base.dev,
+			    "Found the wrong infoframe type 0x%x (expected 0x%02x)\n",
+			    frame->any.type, type);
 }
 
 static bool
@@ -853,7 +854,8 @@ intel_hdmi_compute_drm_infoframe(struct intel_encoder *encoder,
 
 	ret = drm_hdmi_infoframe_set_hdr_metadata(frame, conn_state);
 	if (ret < 0) {
-		DRM_DEBUG_KMS("couldn't set HDR metadata in infoframe\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "couldn't set HDR metadata in infoframe\n");
 		return false;
 	}
 
@@ -893,8 +895,9 @@ static void g4x_set_infoframes(struct intel_encoder *encoder,
 		if (!(val & VIDEO_DIP_ENABLE))
 			return;
 		if (port != (val & VIDEO_DIP_PORT_MASK)) {
-			DRM_DEBUG_KMS("video DIP still enabled on port %c\n",
-				      (val & VIDEO_DIP_PORT_MASK) >> 29);
+			drm_dbg_kms(&dev_priv->drm,
+				    "video DIP still enabled on port %c\n",
+				    (val & VIDEO_DIP_PORT_MASK) >> 29);
 			return;
 		}
 		val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
@@ -906,8 +909,9 @@ static void g4x_set_infoframes(struct intel_encoder *encoder,
 
 	if (port != (val & VIDEO_DIP_PORT_MASK)) {
 		if (val & VIDEO_DIP_ENABLE) {
-			DRM_DEBUG_KMS("video DIP already enabled on port %c\n",
-				      (val & VIDEO_DIP_PORT_MASK) >> 29);
+			drm_dbg_kms(&dev_priv->drm,
+				    "video DIP already enabled on port %c\n",
+				    (val & VIDEO_DIP_PORT_MASK) >> 29);
 			return;
 		}
 		val &= ~VIDEO_DIP_PORT_MASK;
@@ -1264,8 +1268,8 @@ void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable)
 	if (hdmi->dp_dual_mode.type < DRM_DP_DUAL_MODE_TYPE2_DVI)
 		return;
 
-	DRM_DEBUG_KMS("%s DP dual mode adaptor TMDS output\n",
-		      enable ? "Enabling" : "Disabling");
+	drm_dbg_kms(&dev_priv->drm, "%s DP dual mode adaptor TMDS output\n",
+		    enable ? "Enabling" : "Disabling");
 
 	drm_dp_dual_mode_set_tmds_output(hdmi->dp_dual_mode.type,
 					 adapter, enable);
@@ -1346,13 +1350,14 @@ int intel_hdmi_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
 	ret = intel_hdmi_hdcp_write(intel_dig_port, DRM_HDCP_DDC_AN, an,
 				    DRM_HDCP_AN_LEN);
 	if (ret) {
-		DRM_DEBUG_KMS("Write An over DDC failed (%d)\n", ret);
+		drm_dbg_kms(&i915->drm, "Write An over DDC failed (%d)\n",
+			    ret);
 		return ret;
 	}
 
 	ret = intel_gmbus_output_aksv(adapter);
 	if (ret < 0) {
-		DRM_DEBUG_KMS("Failed to output aksv (%d)\n", ret);
+		drm_dbg_kms(&i915->drm, "Failed to output aksv (%d)\n", ret);
 		return ret;
 	}
 	return 0;
@@ -1361,11 +1366,14 @@ int intel_hdmi_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
 static int intel_hdmi_hdcp_read_bksv(struct intel_digital_port *intel_dig_port,
 				     u8 *bksv)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
+
 	int ret;
 	ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BKSV, bksv,
 				   DRM_HDCP_KSV_LEN);
 	if (ret)
-		DRM_DEBUG_KMS("Read Bksv over DDC failed (%d)\n", ret);
+		drm_dbg_kms(&i915->drm, "Read Bksv over DDC failed (%d)\n",
+			    ret);
 	return ret;
 }
 
@@ -1373,11 +1381,14 @@ static
 int intel_hdmi_hdcp_read_bstatus(struct intel_digital_port *intel_dig_port,
 				 u8 *bstatus)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
+
 	int ret;
 	ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BSTATUS,
 				   bstatus, DRM_HDCP_BSTATUS_LEN);
 	if (ret)
-		DRM_DEBUG_KMS("Read bstatus over DDC failed (%d)\n", ret);
+		drm_dbg_kms(&i915->drm, "Read bstatus over DDC failed (%d)\n",
+			    ret);
 	return ret;
 }
 
@@ -1385,12 +1396,14 @@ static
 int intel_hdmi_hdcp_repeater_present(struct intel_digital_port *intel_dig_port,
 				     bool *repeater_present)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	int ret;
 	u8 val;
 
 	ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BCAPS, &val, 1);
 	if (ret) {
-		DRM_DEBUG_KMS("Read bcaps over DDC failed (%d)\n", ret);
+		drm_dbg_kms(&i915->drm, "Read bcaps over DDC failed (%d)\n",
+			    ret);
 		return ret;
 	}
 	*repeater_present = val & DRM_HDCP_DDC_BCAPS_REPEATER_PRESENT;
@@ -1401,11 +1414,14 @@ static
 int intel_hdmi_hdcp_read_ri_prime(struct intel_digital_port *intel_dig_port,
 				  u8 *ri_prime)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
+
 	int ret;
 	ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_RI_PRIME,
 				   ri_prime, DRM_HDCP_RI_LEN);
 	if (ret)
-		DRM_DEBUG_KMS("Read Ri' over DDC failed (%d)\n", ret);
+		drm_dbg_kms(&i915->drm, "Read Ri' over DDC failed (%d)\n",
+			    ret);
 	return ret;
 }
 
@@ -1413,12 +1429,14 @@ static
 int intel_hdmi_hdcp_read_ksv_ready(struct intel_digital_port *intel_dig_port,
 				   bool *ksv_ready)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	int ret;
 	u8 val;
 
 	ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BCAPS, &val, 1);
 	if (ret) {
-		DRM_DEBUG_KMS("Read bcaps over DDC failed (%d)\n", ret);
+		drm_dbg_kms(&i915->drm, "Read bcaps over DDC failed (%d)\n",
+			    ret);
 		return ret;
 	}
 	*ksv_ready = val & DRM_HDCP_DDC_BCAPS_KSV_FIFO_READY;
@@ -1429,11 +1447,13 @@ static
 int intel_hdmi_hdcp_read_ksv_fifo(struct intel_digital_port *intel_dig_port,
 				  int num_downstream, u8 *ksv_fifo)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	int ret;
 	ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_KSV_FIFO,
 				   ksv_fifo, num_downstream * DRM_HDCP_KSV_LEN);
 	if (ret) {
-		DRM_DEBUG_KMS("Read ksv fifo over DDC failed (%d)\n", ret);
+		drm_dbg_kms(&i915->drm,
+			    "Read ksv fifo over DDC failed (%d)\n", ret);
 		return ret;
 	}
 	return 0;
@@ -1443,6 +1463,7 @@ static
 int intel_hdmi_hdcp_read_v_prime_part(struct intel_digital_port *intel_dig_port,
 				      int i, u32 *part)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	int ret;
 
 	if (i >= DRM_HDCP_V_PRIME_NUM_PARTS)
@@ -1451,7 +1472,8 @@ int intel_hdmi_hdcp_read_v_prime_part(struct intel_digital_port *intel_dig_port,
 	ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_V_PRIME(i),
 				   part, DRM_HDCP_V_PRIME_PART_LEN);
 	if (ret)
-		DRM_DEBUG_KMS("Read V'[%d] over DDC failed (%d)\n", i, ret);
+		drm_dbg_kms(&i915->drm, "Read V'[%d] over DDC failed (%d)\n",
+			    i, ret);
 	return ret;
 }
 
@@ -1474,12 +1496,14 @@ static int kbl_repositioning_enc_en_signal(struct intel_connector *connector)
 
 	ret = intel_ddi_toggle_hdcp_signalling(&intel_dig_port->base, false);
 	if (ret) {
-		DRM_ERROR("Disable HDCP signalling failed (%d)\n", ret);
+		drm_err(&dev_priv->drm,
+			"Disable HDCP signalling failed (%d)\n", ret);
 		return ret;
 	}
 	ret = intel_ddi_toggle_hdcp_signalling(&intel_dig_port->base, true);
 	if (ret) {
-		DRM_ERROR("Enable HDCP signalling failed (%d)\n", ret);
+		drm_err(&dev_priv->drm,
+			"Enable HDCP signalling failed (%d)\n", ret);
 		return ret;
 	}
 
@@ -1500,8 +1524,8 @@ int intel_hdmi_hdcp_toggle_signalling(struct intel_digital_port *intel_dig_port,
 
 	ret = intel_ddi_toggle_hdcp_signalling(&intel_dig_port->base, enable);
 	if (ret) {
-		DRM_ERROR("%s HDCP signalling failed (%d)\n",
-			  enable ? "Enable" : "Disable", ret);
+		drm_err(&dev_priv->drm, "%s HDCP signalling failed (%d)\n",
+			enable ? "Enable" : "Disable", ret);
 		return ret;
 	}
 
@@ -1539,8 +1563,10 @@ bool intel_hdmi_hdcp_check_link(struct intel_digital_port *intel_dig_port)
 	if (wait_for((intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)) &
 		      (HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC)) ==
 		     (HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC), 1)) {
-		DRM_ERROR("Ri' mismatch detected, link check failed (%x)\n",
-			  intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)));
+		drm_err(&i915->drm,
+			"Ri' mismatch detected, link check failed (%x)\n",
+			intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder,
+							port)));
 		return false;
 	}
 	return true;
@@ -1588,17 +1614,19 @@ static int get_hdcp2_msg_timeout(u8 msg_id, bool is_paired)
 	return -EINVAL;
 }
 
-static inline
-int hdcp2_detect_msg_availability(struct intel_digital_port *intel_digital_port,
-				  u8 msg_id, bool *msg_ready,
-				  ssize_t *msg_sz)
+static int
+hdcp2_detect_msg_availability(struct intel_digital_port *intel_dig_port,
+			      u8 msg_id, bool *msg_ready,
+			      ssize_t *msg_sz)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	u8 rx_status[HDCP_2_2_HDMI_RXSTATUS_LEN];
 	int ret;
 
-	ret = intel_hdmi_hdcp2_read_rx_status(intel_digital_port, rx_status);
+	ret = intel_hdmi_hdcp2_read_rx_status(intel_dig_port, rx_status);
 	if (ret < 0) {
-		DRM_DEBUG_KMS("rx_status read failed. Err %d\n", ret);
+		drm_dbg_kms(&i915->drm, "rx_status read failed. Err %d\n",
+			    ret);
 		return ret;
 	}
 
@@ -1618,6 +1646,7 @@ static ssize_t
 intel_hdmi_hdcp2_wait_for_msg(struct intel_digital_port *intel_dig_port,
 			      u8 msg_id, bool paired)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	bool msg_ready = false;
 	int timeout, ret;
 	ssize_t msg_sz = 0;
@@ -1632,8 +1661,8 @@ intel_hdmi_hdcp2_wait_for_msg(struct intel_digital_port *intel_dig_port,
 			 !ret && msg_ready && msg_sz, timeout * 1000,
 			 1000, 5 * 1000);
 	if (ret)
-		DRM_DEBUG_KMS("msg_id: %d, ret: %d, timeout: %d\n",
-			      msg_id, ret, timeout);
+		drm_dbg_kms(&i915->drm, "msg_id: %d, ret: %d, timeout: %d\n",
+			    msg_id, ret, timeout);
 
 	return ret ? ret : msg_sz;
 }
@@ -1652,6 +1681,7 @@ static
 int intel_hdmi_hdcp2_read_msg(struct intel_digital_port *intel_dig_port,
 			      u8 msg_id, void *buf, size_t size)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	struct intel_hdmi *hdmi = &intel_dig_port->hdmi;
 	struct intel_hdcp *hdcp = &hdmi->attached_connector->hdcp;
 	unsigned int offset;
@@ -1667,15 +1697,17 @@ int intel_hdmi_hdcp2_read_msg(struct intel_digital_port *intel_dig_port,
 	 * available buffer.
 	 */
 	if (ret > size) {
-		DRM_DEBUG_KMS("msg_sz(%zd) is more than exp size(%zu)\n",
-			      ret, size);
+		drm_dbg_kms(&i915->drm,
+			    "msg_sz(%zd) is more than exp size(%zu)\n",
+			    ret, size);
 		return -1;
 	}
 
 	offset = HDCP_2_2_HDMI_REG_RD_MSG_OFFSET;
 	ret = intel_hdmi_hdcp_read(intel_dig_port, offset, buf, ret);
 	if (ret)
-		DRM_DEBUG_KMS("Failed to read msg_id: %d(%zd)\n", msg_id, ret);
+		drm_dbg_kms(&i915->drm, "Failed to read msg_id: %d(%zd)\n",
+			    msg_id, ret);
 
 	return ret;
 }
@@ -1718,12 +1750,6 @@ int intel_hdmi_hdcp2_capable(struct intel_digital_port *intel_dig_port,
 	return ret;
 }
 
-static inline
-enum hdcp_wired_protocol intel_hdmi_hdcp2_protocol(void)
-{
-	return HDCP_PROTOCOL_HDMI;
-}
-
 static const struct intel_hdcp_shim intel_hdmi_hdcp_shim = {
 	.write_an_aksv = intel_hdmi_hdcp_write_an_aksv,
 	.read_bksv = intel_hdmi_hdcp_read_bksv,
@@ -1871,15 +1897,17 @@ static void intel_enable_hdmi_audio(struct intel_encoder *encoder,
 				    const struct intel_crtc_state *pipe_config,
 				    const struct drm_connector_state *conn_state)
 {
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
 
-	drm_WARN_ON(encoder->base.dev, !pipe_config->has_hdmi_sink);
-	DRM_DEBUG_DRIVER("Enabling HDMI audio on pipe %c\n",
-			 pipe_name(crtc->pipe));
+	drm_WARN_ON(&i915->drm, !pipe_config->has_hdmi_sink);
+	drm_dbg_kms(&i915->drm, "Enabling HDMI audio on pipe %c\n",
+		    pipe_name(crtc->pipe));
 	intel_audio_codec_enable(encoder, pipe_config, conn_state);
 }
 
-static void g4x_enable_hdmi(struct intel_encoder *encoder,
+static void g4x_enable_hdmi(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
 			    const struct intel_crtc_state *pipe_config,
 			    const struct drm_connector_state *conn_state)
 {
@@ -1901,7 +1929,8 @@ static void g4x_enable_hdmi(struct intel_encoder *encoder,
 		intel_enable_hdmi_audio(encoder, pipe_config, conn_state);
 }
 
-static void ibx_enable_hdmi(struct intel_encoder *encoder,
+static void ibx_enable_hdmi(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
 			    const struct intel_crtc_state *pipe_config,
 			    const struct drm_connector_state *conn_state)
 {
@@ -1952,7 +1981,8 @@ static void ibx_enable_hdmi(struct intel_encoder *encoder,
 		intel_enable_hdmi_audio(encoder, pipe_config, conn_state);
 }
 
-static void cpt_enable_hdmi(struct intel_encoder *encoder,
+static void cpt_enable_hdmi(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
 			    const struct intel_crtc_state *pipe_config,
 			    const struct drm_connector_state *conn_state)
 {
@@ -2005,13 +2035,15 @@ static void cpt_enable_hdmi(struct intel_encoder *encoder,
 		intel_enable_hdmi_audio(encoder, pipe_config, conn_state);
 }
 
-static void vlv_enable_hdmi(struct intel_encoder *encoder,
+static void vlv_enable_hdmi(struct intel_atomic_state *state,
+			    struct intel_encoder *encoder,
 			    const struct intel_crtc_state *pipe_config,
 			    const struct drm_connector_state *conn_state)
 {
 }
 
-static void intel_disable_hdmi(struct intel_encoder *encoder,
+static void intel_disable_hdmi(struct intel_atomic_state *state,
+			       struct intel_encoder *encoder,
 			       const struct intel_crtc_state *old_crtc_state,
 			       const struct drm_connector_state *old_conn_state)
 {
@@ -2069,7 +2101,8 @@ static void intel_disable_hdmi(struct intel_encoder *encoder,
 	intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
 }
 
-static void g4x_disable_hdmi(struct intel_encoder *encoder,
+static void g4x_disable_hdmi(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
 			     const struct intel_crtc_state *old_crtc_state,
 			     const struct drm_connector_state *old_conn_state)
 {
@@ -2077,10 +2110,11 @@ static void g4x_disable_hdmi(struct intel_encoder *encoder,
 		intel_audio_codec_disable(encoder,
 					  old_crtc_state, old_conn_state);
 
-	intel_disable_hdmi(encoder, old_crtc_state, old_conn_state);
+	intel_disable_hdmi(state, encoder, old_crtc_state, old_conn_state);
 }
 
-static void pch_disable_hdmi(struct intel_encoder *encoder,
+static void pch_disable_hdmi(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
 			     const struct intel_crtc_state *old_crtc_state,
 			     const struct drm_connector_state *old_conn_state)
 {
@@ -2089,11 +2123,12 @@ static void pch_disable_hdmi(struct intel_encoder *encoder,
 					  old_crtc_state, old_conn_state);
 }
 
-static void pch_post_disable_hdmi(struct intel_encoder *encoder,
+static void pch_post_disable_hdmi(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *old_crtc_state,
 				  const struct drm_connector_state *old_conn_state)
 {
-	intel_disable_hdmi(encoder, old_crtc_state, old_conn_state);
+	intel_disable_hdmi(state, encoder, old_crtc_state, old_conn_state);
 }
 
 static int intel_hdmi_source_max_tmds_clock(struct intel_encoder *encoder)
@@ -2286,29 +2321,27 @@ static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
 	return true;
 }
 
-static bool
-intel_hdmi_ycbcr420_config(struct drm_connector *connector,
-			   struct intel_crtc_state *config)
+static int
+intel_hdmi_ycbcr420_config(struct intel_crtc_state *crtc_state,
+			   const struct drm_connector_state *conn_state)
 {
-	struct intel_crtc *intel_crtc = to_intel_crtc(config->uapi.crtc);
-
-	if (!connector->ycbcr_420_allowed) {
-		DRM_ERROR("Platform doesn't support YCBCR420 output\n");
-		return false;
-	}
+	struct drm_connector *connector = conn_state->connector;
+	struct drm_i915_private *i915 = to_i915(connector->dev);
+	const struct drm_display_mode *adjusted_mode =
+		&crtc_state->hw.adjusted_mode;
 
-	config->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+	if (!drm_mode_is_420_only(&connector->display_info, adjusted_mode))
+		return 0;
 
-	/* YCBCR 420 output conversion needs a scaler */
-	if (skl_update_scaler_crtc(config)) {
-		DRM_DEBUG_KMS("Scaler allocation for output failed\n");
-		return false;
+	if (!connector->ycbcr_420_allowed) {
+		drm_err(&i915->drm,
+			"Platform doesn't support YCBCR420 output\n");
+		return -EINVAL;
 	}
 
-	intel_pch_panel_fitting(intel_crtc, config,
-				DRM_MODE_SCALE_FULLSCREEN);
+	crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
 
-	return true;
+	return intel_pch_panel_fitting(crtc_state, conn_state);
 }
 
 static int intel_hdmi_port_clock(int clock, int bpc)
@@ -2342,6 +2375,7 @@ static int intel_hdmi_compute_bpc(struct intel_encoder *encoder,
 static int intel_hdmi_compute_clock(struct intel_encoder *encoder,
 				    struct intel_crtc_state *crtc_state)
 {
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
 	const struct drm_display_mode *adjusted_mode =
 		&crtc_state->hw.adjusted_mode;
@@ -2366,13 +2400,15 @@ static int intel_hdmi_compute_clock(struct intel_encoder *encoder,
 	if (crtc_state->pipe_bpp > bpc * 3)
 		crtc_state->pipe_bpp = bpc * 3;
 
-	DRM_DEBUG_KMS("picking %d bpc for HDMI output (pipe bpp: %d)\n",
-		      bpc, crtc_state->pipe_bpp);
+	drm_dbg_kms(&i915->drm,
+		    "picking %d bpc for HDMI output (pipe bpp: %d)\n",
+		    bpc, crtc_state->pipe_bpp);
 
 	if (hdmi_port_clock_valid(intel_hdmi, crtc_state->port_clock,
 				  false, crtc_state->has_hdmi_sink) != MODE_OK) {
-		DRM_DEBUG_KMS("unsupported HDMI clock (%d kHz), rejecting mode\n",
-			      crtc_state->port_clock);
+		drm_dbg_kms(&i915->drm,
+			    "unsupported HDMI clock (%d kHz), rejecting mode\n",
+			    crtc_state->port_clock);
 		return -EINVAL;
 	}
 
@@ -2433,12 +2469,9 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
 		pipe_config->pixel_multiplier = 2;
 
-	if (drm_mode_is_420_only(&connector->display_info, adjusted_mode)) {
-		if (!intel_hdmi_ycbcr420_config(connector, pipe_config)) {
-			DRM_ERROR("Can't support YCBCR420 output\n");
-			return -EINVAL;
-		}
-	}
+	ret = intel_hdmi_ycbcr420_config(pipe_config, conn_state);
+	if (ret)
+		return ret;
 
 	pipe_config->limited_color_range =
 		intel_hdmi_limited_color_range(pipe_config, conn_state);
@@ -2475,25 +2508,26 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
 		}
 	}
 
-	intel_hdmi_compute_gcp_infoframe(encoder, pipe_config, conn_state);
+	intel_hdmi_compute_gcp_infoframe(encoder, pipe_config,
+					 conn_state);
 
 	if (!intel_hdmi_compute_avi_infoframe(encoder, pipe_config, conn_state)) {
-		DRM_DEBUG_KMS("bad AVI infoframe\n");
+		drm_dbg_kms(&dev_priv->drm, "bad AVI infoframe\n");
 		return -EINVAL;
 	}
 
 	if (!intel_hdmi_compute_spd_infoframe(encoder, pipe_config, conn_state)) {
-		DRM_DEBUG_KMS("bad SPD infoframe\n");
+		drm_dbg_kms(&dev_priv->drm, "bad SPD infoframe\n");
 		return -EINVAL;
 	}
 
 	if (!intel_hdmi_compute_hdmi_infoframe(encoder, pipe_config, conn_state)) {
-		DRM_DEBUG_KMS("bad HDMI infoframe\n");
+		drm_dbg_kms(&dev_priv->drm, "bad HDMI infoframe\n");
 		return -EINVAL;
 	}
 
 	if (!intel_hdmi_compute_drm_infoframe(encoder, pipe_config, conn_state)) {
-		DRM_DEBUG_KMS("bad DRM infoframe\n");
+		drm_dbg_kms(&dev_priv->drm, "bad DRM infoframe\n");
 		return -EINVAL;
 	}
 
@@ -2543,7 +2577,8 @@ intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
 		 */
 		if (has_edid && !connector->override_edid &&
 		    intel_bios_is_port_dp_dual_mode(dev_priv, port)) {
-			DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on VBT\n");
+			drm_dbg_kms(&dev_priv->drm,
+				    "Assuming DP dual mode adaptor presence based on VBT\n");
 			type = DRM_DP_DUAL_MODE_TYPE1_DVI;
 		} else {
 			type = DRM_DP_DUAL_MODE_NONE;
@@ -2557,9 +2592,10 @@ intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
 	hdmi->dp_dual_mode.max_tmds_clock =
 		drm_dp_dual_mode_max_tmds_clock(type, adapter);
 
-	DRM_DEBUG_KMS("DP dual mode adaptor (%s) detected (max TMDS clock: %d kHz)\n",
-		      drm_dp_get_dual_mode_type_name(type),
-		      hdmi->dp_dual_mode.max_tmds_clock);
+	drm_dbg_kms(&dev_priv->drm,
+		    "DP dual mode adaptor (%s) detected (max TMDS clock: %d kHz)\n",
+		    drm_dp_get_dual_mode_type_name(type),
+		    hdmi->dp_dual_mode.max_tmds_clock);
 }
 
 static bool
@@ -2579,7 +2615,8 @@ intel_hdmi_set_edid(struct drm_connector *connector)
 	edid = drm_get_edid(connector, i2c);
 
 	if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
-		DRM_DEBUG_KMS("HDMI GMBUS EDID read failed, retry using GPIO bit-banging\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "HDMI GMBUS EDID read failed, retry using GPIO bit-banging\n");
 		intel_gmbus_force_bit(i2c, true);
 		edid = drm_get_edid(connector, i2c);
 		intel_gmbus_force_bit(i2c, false);
@@ -2611,8 +2648,8 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
 	struct intel_encoder *encoder = &hdmi_to_dig_port(intel_hdmi)->base;
 	intel_wakeref_t wakeref;
 
-	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, connector->name);
+	drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n",
+		    connector->base.id, connector->name);
 
 	wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
 
@@ -2643,8 +2680,10 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
 static void
 intel_hdmi_force(struct drm_connector *connector)
 {
-	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, connector->name);
+	struct drm_i915_private *i915 = to_i915(connector->dev);
+
+	drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s]\n",
+		    connector->base.id, connector->name);
 
 	intel_hdmi_unset_edid(connector);
 
@@ -2665,7 +2704,8 @@ static int intel_hdmi_get_modes(struct drm_connector *connector)
 	return intel_connector_update_modes(connector, edid);
 }
 
-static void intel_hdmi_pre_enable(struct intel_encoder *encoder,
+static void intel_hdmi_pre_enable(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *pipe_config,
 				  const struct drm_connector_state *conn_state)
 {
@@ -2679,7 +2719,8 @@ static void intel_hdmi_pre_enable(struct intel_encoder *encoder,
 				       pipe_config, conn_state);
 }
 
-static void vlv_hdmi_pre_enable(struct intel_encoder *encoder,
+static void vlv_hdmi_pre_enable(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
 				const struct intel_crtc_state *pipe_config,
 				const struct drm_connector_state *conn_state)
 {
@@ -2696,12 +2737,13 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder,
 			      pipe_config->has_infoframe,
 			      pipe_config, conn_state);
 
-	g4x_enable_hdmi(encoder, pipe_config, conn_state);
+	g4x_enable_hdmi(state, encoder, pipe_config, conn_state);
 
 	vlv_wait_port_ready(dev_priv, dport, 0x0);
 }
 
-static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder,
+static void vlv_hdmi_pre_pll_enable(struct intel_atomic_state *state,
+				    struct intel_encoder *encoder,
 				    const struct intel_crtc_state *pipe_config,
 				    const struct drm_connector_state *conn_state)
 {
@@ -2710,7 +2752,8 @@ static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder,
 	vlv_phy_pre_pll_enable(encoder, pipe_config);
 }
 
-static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder,
+static void chv_hdmi_pre_pll_enable(struct intel_atomic_state *state,
+				    struct intel_encoder *encoder,
 				    const struct intel_crtc_state *pipe_config,
 				    const struct drm_connector_state *conn_state)
 {
@@ -2719,14 +2762,16 @@ static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder,
 	chv_phy_pre_pll_enable(encoder, pipe_config);
 }
 
-static void chv_hdmi_post_pll_disable(struct intel_encoder *encoder,
+static void chv_hdmi_post_pll_disable(struct intel_atomic_state *state,
+				      struct intel_encoder *encoder,
 				      const struct intel_crtc_state *old_crtc_state,
 				      const struct drm_connector_state *old_conn_state)
 {
 	chv_phy_post_pll_disable(encoder, old_crtc_state);
 }
 
-static void vlv_hdmi_post_disable(struct intel_encoder *encoder,
+static void vlv_hdmi_post_disable(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *old_crtc_state,
 				  const struct drm_connector_state *old_conn_state)
 {
@@ -2734,7 +2779,8 @@ static void vlv_hdmi_post_disable(struct intel_encoder *encoder,
 	vlv_phy_reset_lanes(encoder, old_crtc_state);
 }
 
-static void chv_hdmi_post_disable(struct intel_encoder *encoder,
+static void chv_hdmi_post_disable(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *old_crtc_state,
 				  const struct drm_connector_state *old_conn_state)
 {
@@ -2749,7 +2795,8 @@ static void chv_hdmi_post_disable(struct intel_encoder *encoder,
 	vlv_dpio_put(dev_priv);
 }
 
-static void chv_hdmi_pre_enable(struct intel_encoder *encoder,
+static void chv_hdmi_pre_enable(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
 				const struct intel_crtc_state *pipe_config,
 				const struct drm_connector_state *conn_state)
 {
@@ -2767,7 +2814,7 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder,
 			      pipe_config->has_infoframe,
 			      pipe_config, conn_state);
 
-	g4x_enable_hdmi(encoder, pipe_config, conn_state);
+	g4x_enable_hdmi(state, encoder, pipe_config, conn_state);
 
 	vlv_wait_port_ready(dev_priv, dport, 0x0);
 
@@ -2786,6 +2833,7 @@ intel_hdmi_get_i2c_adapter(struct drm_connector *connector)
 
 static void intel_hdmi_create_i2c_symlink(struct drm_connector *connector)
 {
+	struct drm_i915_private *i915 = to_i915(connector->dev);
 	struct i2c_adapter *adapter = intel_hdmi_get_i2c_adapter(connector);
 	struct kobject *i2c_kobj = &adapter->dev.kobj;
 	struct kobject *connector_kobj = &connector->kdev->kobj;
@@ -2793,7 +2841,7 @@ static void intel_hdmi_create_i2c_symlink(struct drm_connector *connector)
 
 	ret = sysfs_create_link(connector_kobj, i2c_kobj, i2c_kobj->name);
 	if (ret)
-		DRM_ERROR("Failed to create i2c symlink (%d)\n", ret);
+		drm_err(&i915->drm, "Failed to create i2c symlink (%d)\n", ret);
 }
 
 static void intel_hdmi_remove_i2c_symlink(struct drm_connector *connector)
@@ -2814,8 +2862,6 @@ intel_hdmi_connector_register(struct drm_connector *connector)
 	if (ret)
 		return ret;
 
-	intel_connector_debugfs_add(connector);
-
 	intel_hdmi_create_i2c_symlink(connector);
 
 	return ret;
@@ -2922,9 +2968,10 @@ bool intel_hdmi_handle_sink_scrambling(struct intel_encoder *encoder,
 	if (!sink_scrambling->supported)
 		return true;
 
-	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] scrambling=%s, TMDS bit clock ratio=1/%d\n",
-		      connector->base.id, connector->name,
-		      yesno(scrambling), high_tmds_clock_ratio ? 40 : 10);
+	drm_dbg_kms(&dev_priv->drm,
+		    "[CONNECTOR:%d:%s] scrambling=%s, TMDS bit clock ratio=1/%d\n",
+		    connector->base.id, connector->name,
+		    yesno(scrambling), high_tmds_clock_ratio ? 40 : 10);
 
 	/* Set TMDS bit clock ratio to 1/40 or 1/10, and enable/disable scrambling */
 	return drm_scdc_set_high_tmds_clock_ratio(adapter,
@@ -3066,8 +3113,9 @@ static u8 intel_hdmi_ddc_pin(struct intel_encoder *encoder)
 
 	ddc_pin = intel_bios_alternate_ddc_pin(encoder);
 	if (ddc_pin) {
-		DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n",
-			      ddc_pin, port_name(port));
+		drm_dbg_kms(&dev_priv->drm,
+			    "Using DDC pin 0x%x for port %c (VBT)\n",
+			    ddc_pin, port_name(port));
 		return ddc_pin;
 	}
 
@@ -3084,8 +3132,9 @@ static u8 intel_hdmi_ddc_pin(struct intel_encoder *encoder)
 	else
 		ddc_pin = g4x_port_to_ddc_pin(dev_priv, port);
 
-	DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n",
-		      ddc_pin, port_name(port));
+	drm_dbg_kms(&dev_priv->drm,
+		    "Using DDC pin 0x%x for port %c (platform default)\n",
+		    ddc_pin, port_name(port));
 
 	return ddc_pin;
 }
@@ -3142,8 +3191,9 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 	enum port port = intel_encoder->port;
 	struct cec_connector_info conn_info;
 
-	DRM_DEBUG_KMS("Adding HDMI connector on [ENCODER:%d:%s]\n",
-		      intel_encoder->base.base.id, intel_encoder->base.name);
+	drm_dbg_kms(&dev_priv->drm,
+		    "Adding HDMI connector on [ENCODER:%d:%s]\n",
+		    intel_encoder->base.base.id, intel_encoder->base.name);
 
 	if (INTEL_GEN(dev_priv) < 12 && drm_WARN_ON(dev, port == PORT_A))
 		return;
@@ -3187,7 +3237,8 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 		int ret = intel_hdcp_init(intel_connector,
 					  &intel_hdmi_hdcp_shim);
 		if (ret)
-			DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
+			drm_dbg_kms(&dev_priv->drm,
+				    "HDCP init failed, skipping.\n");
 	}
 
 	/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
@@ -3206,16 +3257,16 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 		cec_notifier_conn_register(dev->dev, port_identifier(port),
 					   &conn_info);
 	if (!intel_hdmi->cec_notifier)
-		DRM_DEBUG_KMS("CEC notifier get failed\n");
+		drm_dbg_kms(&dev_priv->drm, "CEC notifier get failed\n");
 }
 
 static enum intel_hotplug_state
 intel_hdmi_hotplug(struct intel_encoder *encoder,
-		   struct intel_connector *connector, bool irq_received)
+		   struct intel_connector *connector)
 {
 	enum intel_hotplug_state state;
 
-	state = intel_encoder_hotplug(encoder, connector, irq_received);
+	state = intel_encoder_hotplug(encoder, connector);
 
 	/*
 	 * On many platforms the HDMI live state signal is known to be
@@ -3229,7 +3280,7 @@ intel_hdmi_hotplug(struct intel_encoder *encoder,
 	 * time around we didn't detect any change in the sink's connection
 	 * status.
 	 */
-	if (state == INTEL_HOTPLUG_UNCHANGED && irq_received)
+	if (state == INTEL_HOTPLUG_UNCHANGED && !connector->hotplug_retries)
 		state = INTEL_HOTPLUG_RETRY;
 
 	return state;
diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c
index a091442efba4..4f6f560e093e 100644
--- a/drivers/gpu/drm/i915/display/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/display/intel_hotplug.c
@@ -270,8 +270,7 @@ static void intel_hpd_irq_storm_reenable_work(struct work_struct *work)
 
 enum intel_hotplug_state
 intel_encoder_hotplug(struct intel_encoder *encoder,
-		      struct intel_connector *connector,
-		      bool irq_received)
+		      struct intel_connector *connector)
 {
 	struct drm_device *dev = connector->base.dev;
 	enum drm_connector_status old_status;
@@ -392,12 +391,17 @@ static void i915_hotplug_work_func(struct work_struct *work)
 			struct intel_encoder *encoder =
 				intel_attached_encoder(connector);
 
+			if (hpd_event_bits & hpd_bit)
+				connector->hotplug_retries = 0;
+			else
+				connector->hotplug_retries++;
+
 			drm_dbg_kms(&dev_priv->drm,
-				    "Connector %s (pin %i) received hotplug event.\n",
-				    connector->base.name, pin);
+				    "Connector %s (pin %i) received hotplug event. (retry %d)\n",
+				    connector->base.name, pin,
+				    connector->hotplug_retries);
 
-			switch (encoder->hotplug(encoder, connector,
-						 hpd_event_bits & hpd_bit)) {
+			switch (encoder->hotplug(encoder, connector)) {
 			case INTEL_HOTPLUG_UNCHANGED:
 				break;
 			case INTEL_HOTPLUG_CHANGED:
diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.h b/drivers/gpu/drm/i915/display/intel_hotplug.h
index 1e6b4fda2900..777b0743257e 100644
--- a/drivers/gpu/drm/i915/display/intel_hotplug.h
+++ b/drivers/gpu/drm/i915/display/intel_hotplug.h
@@ -15,8 +15,7 @@ enum port;
 
 void intel_hpd_poll_init(struct drm_i915_private *dev_priv);
 enum intel_hotplug_state intel_encoder_hotplug(struct intel_encoder *encoder,
-					       struct intel_connector *connector,
-					       bool irq_received);
+					       struct intel_connector *connector);
 void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
 			   u32 pin_mask, u32 long_mask);
 void intel_hpd_init(struct drm_i915_private *dev_priv);
diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
index 9a067effcfa0..872f2a489339 100644
--- a/drivers/gpu/drm/i915/display/intel_lvds.c
+++ b/drivers/gpu/drm/i915/display/intel_lvds.c
@@ -220,7 +220,8 @@ static void intel_lvds_pps_init_hw(struct drm_i915_private *dev_priv,
 		       REG_FIELD_PREP(PP_REFERENCE_DIVIDER_MASK, pps->divider) | REG_FIELD_PREP(PANEL_POWER_CYCLE_DELAY_MASK, DIV_ROUND_UP(pps->t4, 1000) + 1));
 }
 
-static void intel_pre_enable_lvds(struct intel_encoder *encoder,
+static void intel_pre_enable_lvds(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *pipe_config,
 				  const struct drm_connector_state *conn_state)
 {
@@ -301,7 +302,8 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder,
 /*
  * Sets the power state for the panel.
  */
-static void intel_enable_lvds(struct intel_encoder *encoder,
+static void intel_enable_lvds(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *pipe_config,
 			      const struct drm_connector_state *conn_state)
 {
@@ -323,7 +325,8 @@ static void intel_enable_lvds(struct intel_encoder *encoder,
 	intel_panel_enable_backlight(pipe_config, conn_state);
 }
 
-static void intel_disable_lvds(struct intel_encoder *encoder,
+static void intel_disable_lvds(struct intel_atomic_state *state,
+			       struct intel_encoder *encoder,
 			       const struct intel_crtc_state *old_crtc_state,
 			       const struct drm_connector_state *old_conn_state)
 {
@@ -341,28 +344,31 @@ static void intel_disable_lvds(struct intel_encoder *encoder,
 	intel_de_posting_read(dev_priv, lvds_encoder->reg);
 }
 
-static void gmch_disable_lvds(struct intel_encoder *encoder,
+static void gmch_disable_lvds(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *old_crtc_state,
 			      const struct drm_connector_state *old_conn_state)
 
 {
 	intel_panel_disable_backlight(old_conn_state);
 
-	intel_disable_lvds(encoder, old_crtc_state, old_conn_state);
+	intel_disable_lvds(state, encoder, old_crtc_state, old_conn_state);
 }
 
-static void pch_disable_lvds(struct intel_encoder *encoder,
+static void pch_disable_lvds(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
 			     const struct intel_crtc_state *old_crtc_state,
 			     const struct drm_connector_state *old_conn_state)
 {
 	intel_panel_disable_backlight(old_conn_state);
 }
 
-static void pch_post_disable_lvds(struct intel_encoder *encoder,
+static void pch_post_disable_lvds(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *old_crtc_state,
 				  const struct drm_connector_state *old_conn_state)
 {
-	intel_disable_lvds(encoder, old_crtc_state, old_conn_state);
+	intel_disable_lvds(state, encoder, old_crtc_state, old_conn_state);
 }
 
 static enum drm_mode_status
@@ -397,6 +403,7 @@ static int intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
 	struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->uapi.crtc);
 	unsigned int lvds_bpp;
+	int ret;
 
 	/* Should never happen!! */
 	if (INTEL_GEN(dev_priv) < 4 && intel_crtc->pipe == 0) {
@@ -430,16 +437,15 @@ static int intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return -EINVAL;
 
-	if (HAS_PCH_SPLIT(dev_priv)) {
+	if (HAS_PCH_SPLIT(dev_priv))
 		pipe_config->has_pch_encoder = true;
 
-		intel_pch_panel_fitting(intel_crtc, pipe_config,
-					conn_state->scaling_mode);
-	} else {
-		intel_gmch_panel_fitting(intel_crtc, pipe_config,
-					 conn_state->scaling_mode);
-
-	}
+	if (HAS_GMCH(dev_priv))
+		ret = intel_gmch_panel_fitting(pipe_config, conn_state);
+	else
+		ret = intel_pch_panel_fitting(pipe_config, conn_state);
+	if (ret)
+		return ret;
 
 	/*
 	 * XXX: It would be nice to support lower refresh rates on the
diff --git a/drivers/gpu/drm/i915/display/intel_overlay.c b/drivers/gpu/drm/i915/display/intel_overlay.c
index 481187223101..66711e62fa71 100644
--- a/drivers/gpu/drm/i915/display/intel_overlay.c
+++ b/drivers/gpu/drm/i915/display/intel_overlay.c
@@ -281,7 +281,7 @@ static void intel_overlay_flip_prepare(struct intel_overlay *overlay,
 	enum pipe pipe = overlay->crtc->pipe;
 	struct intel_frontbuffer *from = NULL, *to = NULL;
 
-	WARN_ON(overlay->old_vma);
+	drm_WARN_ON(&overlay->i915->drm, overlay->old_vma);
 
 	if (overlay->vma)
 		from = intel_frontbuffer_get(overlay->vma->obj);
@@ -350,7 +350,7 @@ static void intel_overlay_release_old_vma(struct intel_overlay *overlay)
 	struct i915_vma *vma;
 
 	vma = fetch_and_zero(&overlay->old_vma);
-	if (WARN_ON(!vma))
+	if (drm_WARN_ON(&overlay->i915->drm, !vma))
 		return;
 
 	intel_frontbuffer_flip_complete(overlay->i915,
@@ -396,7 +396,7 @@ static int intel_overlay_off(struct intel_overlay *overlay)
 	struct i915_request *rq;
 	u32 *cs, flip_addr = overlay->flip_addr;
 
-	WARN_ON(!overlay->active);
+	drm_WARN_ON(&overlay->i915->drm, !overlay->active);
 
 	/* According to intel docs the overlay hw may hang (when switching
 	 * off) without loading the filter coeffs. It is however unclear whether
@@ -1342,7 +1342,7 @@ void intel_overlay_setup(struct drm_i915_private *dev_priv)
 	if (!HAS_OVERLAY(dev_priv))
 		return;
 
-	engine = dev_priv->engine[RCS0];
+	engine = dev_priv->gt.engine[RCS0];
 	if (!engine || !engine->kernel_context)
 		return;
 
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index 276f43870802..aa931f9f0d6a 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -176,24 +176,23 @@ intel_panel_vbt_fixed_mode(struct intel_connector *connector)
 }
 
 /* adjusted_mode has been preset to be the panel's fixed mode */
-void
-intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
-			struct intel_crtc_state *pipe_config,
-			int fitting_mode)
+int intel_pch_panel_fitting(struct intel_crtc_state *crtc_state,
+			    const struct drm_connector_state *conn_state)
 {
-	const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
-	int x = 0, y = 0, width = 0, height = 0;
+	const struct drm_display_mode *adjusted_mode =
+		&crtc_state->hw.adjusted_mode;
+	int x, y, width, height;
 
 	/* Native modes don't need fitting */
-	if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
-	    adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h &&
-	    pipe_config->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
-		goto done;
+	if (adjusted_mode->crtc_hdisplay == crtc_state->pipe_src_w &&
+	    adjusted_mode->crtc_vdisplay == crtc_state->pipe_src_h &&
+	    crtc_state->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
+		return 0;
 
-	switch (fitting_mode) {
+	switch (conn_state->scaling_mode) {
 	case DRM_MODE_SCALE_CENTER:
-		width = pipe_config->pipe_src_w;
-		height = pipe_config->pipe_src_h;
+		width = crtc_state->pipe_src_w;
+		height = crtc_state->pipe_src_h;
 		x = (adjusted_mode->crtc_hdisplay - width + 1)/2;
 		y = (adjusted_mode->crtc_vdisplay - height + 1)/2;
 		break;
@@ -202,18 +201,18 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 		/* Scale but preserve the aspect ratio */
 		{
 			u32 scaled_width = adjusted_mode->crtc_hdisplay
-				* pipe_config->pipe_src_h;
-			u32 scaled_height = pipe_config->pipe_src_w
+				* crtc_state->pipe_src_h;
+			u32 scaled_height = crtc_state->pipe_src_w
 				* adjusted_mode->crtc_vdisplay;
 			if (scaled_width > scaled_height) { /* pillar */
-				width = scaled_height / pipe_config->pipe_src_h;
+				width = scaled_height / crtc_state->pipe_src_h;
 				if (width & 1)
 					width++;
 				x = (adjusted_mode->crtc_hdisplay - width + 1) / 2;
 				y = 0;
 				height = adjusted_mode->crtc_vdisplay;
 			} else if (scaled_width < scaled_height) { /* letter */
-				height = scaled_width / pipe_config->pipe_src_w;
+				height = scaled_width / crtc_state->pipe_src_w;
 				if (height & 1)
 				    height++;
 				y = (adjusted_mode->crtc_vdisplay - height + 1) / 2;
@@ -227,6 +226,10 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 		}
 		break;
 
+	case DRM_MODE_SCALE_NONE:
+		WARN_ON(adjusted_mode->crtc_hdisplay != crtc_state->pipe_src_w);
+		WARN_ON(adjusted_mode->crtc_vdisplay != crtc_state->pipe_src_h);
+		/* fall through */
 	case DRM_MODE_SCALE_FULLSCREEN:
 		x = y = 0;
 		width = adjusted_mode->crtc_hdisplay;
@@ -234,14 +237,15 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 		break;
 
 	default:
-		WARN(1, "bad panel fit mode: %d\n", fitting_mode);
-		return;
+		MISSING_CASE(conn_state->scaling_mode);
+		return -EINVAL;
 	}
 
-done:
-	pipe_config->pch_pfit.pos = (x << 16) | y;
-	pipe_config->pch_pfit.size = (width << 16) | height;
-	pipe_config->pch_pfit.enabled = pipe_config->pch_pfit.size != 0;
+	drm_rect_init(&crtc_state->pch_pfit.dst,
+		      x, y, width, height);
+	crtc_state->pch_pfit.enabled = true;
+
+	return 0;
 }
 
 static void
@@ -287,7 +291,7 @@ centre_vertically(struct drm_display_mode *adjusted_mode,
 	adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + sync_width;
 }
 
-static inline u32 panel_fitter_scaling(u32 source, u32 target)
+static u32 panel_fitter_scaling(u32 source, u32 target)
 {
 	/*
 	 * Floating point operation is not supported. So the FACTOR
@@ -300,13 +304,14 @@ static inline u32 panel_fitter_scaling(u32 source, u32 target)
 	return (FACTOR * ratio + FACTOR/2) / FACTOR;
 }
 
-static void i965_scale_aspect(struct intel_crtc_state *pipe_config,
+static void i965_scale_aspect(struct intel_crtc_state *crtc_state,
 			      u32 *pfit_control)
 {
-	const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
+	const struct drm_display_mode *adjusted_mode =
+		&crtc_state->hw.adjusted_mode;
 	u32 scaled_width = adjusted_mode->crtc_hdisplay *
-		pipe_config->pipe_src_h;
-	u32 scaled_height = pipe_config->pipe_src_w *
+		crtc_state->pipe_src_h;
+	u32 scaled_height = crtc_state->pipe_src_w *
 		adjusted_mode->crtc_vdisplay;
 
 	/* 965+ is easy, it does everything in hw */
@@ -316,18 +321,18 @@ static void i965_scale_aspect(struct intel_crtc_state *pipe_config,
 	else if (scaled_width < scaled_height)
 		*pfit_control |= PFIT_ENABLE |
 			PFIT_SCALING_LETTER;
-	else if (adjusted_mode->crtc_hdisplay != pipe_config->pipe_src_w)
+	else if (adjusted_mode->crtc_hdisplay != crtc_state->pipe_src_w)
 		*pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
 }
 
-static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config,
+static void i9xx_scale_aspect(struct intel_crtc_state *crtc_state,
 			      u32 *pfit_control, u32 *pfit_pgm_ratios,
 			      u32 *border)
 {
-	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
+	struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
 	u32 scaled_width = adjusted_mode->crtc_hdisplay *
-		pipe_config->pipe_src_h;
-	u32 scaled_height = pipe_config->pipe_src_w *
+		crtc_state->pipe_src_h;
+	u32 scaled_height = crtc_state->pipe_src_w *
 		adjusted_mode->crtc_vdisplay;
 	u32 bits;
 
@@ -339,11 +344,11 @@ static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config,
 	if (scaled_width > scaled_height) { /* pillar */
 		centre_horizontally(adjusted_mode,
 				    scaled_height /
-				    pipe_config->pipe_src_h);
+				    crtc_state->pipe_src_h);
 
 		*border = LVDS_BORDER_ENABLE;
-		if (pipe_config->pipe_src_h != adjusted_mode->crtc_vdisplay) {
-			bits = panel_fitter_scaling(pipe_config->pipe_src_h,
+		if (crtc_state->pipe_src_h != adjusted_mode->crtc_vdisplay) {
+			bits = panel_fitter_scaling(crtc_state->pipe_src_h,
 						    adjusted_mode->crtc_vdisplay);
 
 			*pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
@@ -355,11 +360,11 @@ static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config,
 	} else if (scaled_width < scaled_height) { /* letter */
 		centre_vertically(adjusted_mode,
 				  scaled_width /
-				  pipe_config->pipe_src_w);
+				  crtc_state->pipe_src_w);
 
 		*border = LVDS_BORDER_ENABLE;
-		if (pipe_config->pipe_src_w != adjusted_mode->crtc_hdisplay) {
-			bits = panel_fitter_scaling(pipe_config->pipe_src_w,
+		if (crtc_state->pipe_src_w != adjusted_mode->crtc_hdisplay) {
+			bits = panel_fitter_scaling(crtc_state->pipe_src_w,
 						    adjusted_mode->crtc_hdisplay);
 
 			*pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
@@ -377,35 +382,35 @@ static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config,
 	}
 }
 
-void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
-			      struct intel_crtc_state *pipe_config,
-			      int fitting_mode)
+int intel_gmch_panel_fitting(struct intel_crtc_state *crtc_state,
+			     const struct drm_connector_state *conn_state)
 {
-	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
-	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
+	struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
 
 	/* Native modes don't need fitting */
-	if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
-	    adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h)
+	if (adjusted_mode->crtc_hdisplay == crtc_state->pipe_src_w &&
+	    adjusted_mode->crtc_vdisplay == crtc_state->pipe_src_h)
 		goto out;
 
-	switch (fitting_mode) {
+	switch (conn_state->scaling_mode) {
 	case DRM_MODE_SCALE_CENTER:
 		/*
 		 * For centered modes, we have to calculate border widths &
 		 * heights and modify the values programmed into the CRTC.
 		 */
-		centre_horizontally(adjusted_mode, pipe_config->pipe_src_w);
-		centre_vertically(adjusted_mode, pipe_config->pipe_src_h);
+		centre_horizontally(adjusted_mode, crtc_state->pipe_src_w);
+		centre_vertically(adjusted_mode, crtc_state->pipe_src_h);
 		border = LVDS_BORDER_ENABLE;
 		break;
 	case DRM_MODE_SCALE_ASPECT:
 		/* Scale but preserve the aspect ratio */
 		if (INTEL_GEN(dev_priv) >= 4)
-			i965_scale_aspect(pipe_config, &pfit_control);
+			i965_scale_aspect(crtc_state, &pfit_control);
 		else
-			i9xx_scale_aspect(pipe_config, &pfit_control,
+			i9xx_scale_aspect(crtc_state, &pfit_control,
 					  &pfit_pgm_ratios, &border);
 		break;
 	case DRM_MODE_SCALE_FULLSCREEN:
@@ -413,8 +418,8 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 		 * Full scaling, even if it changes the aspect ratio.
 		 * Fortunately this is all done for us in hw.
 		 */
-		if (pipe_config->pipe_src_h != adjusted_mode->crtc_vdisplay ||
-		    pipe_config->pipe_src_w != adjusted_mode->crtc_hdisplay) {
+		if (crtc_state->pipe_src_h != adjusted_mode->crtc_vdisplay ||
+		    crtc_state->pipe_src_w != adjusted_mode->crtc_hdisplay) {
 			pfit_control |= PFIT_ENABLE;
 			if (INTEL_GEN(dev_priv) >= 4)
 				pfit_control |= PFIT_SCALING_AUTO;
@@ -426,15 +431,14 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 		}
 		break;
 	default:
-		drm_WARN(&dev_priv->drm, 1, "bad panel fit mode: %d\n",
-			 fitting_mode);
-		return;
+		MISSING_CASE(conn_state->scaling_mode);
+		return -EINVAL;
 	}
 
 	/* 965+ wants fuzzy fitting */
 	/* FIXME: handle multiple panels by failing gracefully */
 	if (INTEL_GEN(dev_priv) >= 4)
-		pfit_control |= PFIT_PIPE(intel_crtc->pipe) | PFIT_FILTER_FUZZY;
+		pfit_control |= PFIT_PIPE(crtc->pipe) | PFIT_FILTER_FUZZY;
 
 out:
 	if ((pfit_control & PFIT_ENABLE) == 0) {
@@ -443,12 +447,14 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 	}
 
 	/* Make sure pre-965 set dither correctly for 18bpp panels. */
-	if (INTEL_GEN(dev_priv) < 4 && pipe_config->pipe_bpp == 18)
+	if (INTEL_GEN(dev_priv) < 4 && crtc_state->pipe_bpp == 18)
 		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
 
-	pipe_config->gmch_pfit.control = pfit_control;
-	pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios;
-	pipe_config->gmch_pfit.lvds_border_bits = border;
+	crtc_state->gmch_pfit.control = pfit_control;
+	crtc_state->gmch_pfit.pgm_ratios = pfit_pgm_ratios;
+	crtc_state->gmch_pfit.lvds_border_bits = border;
+
+	return 0;
 }
 
 /**
@@ -484,8 +490,8 @@ static u32 scale(u32 source_val,
 }
 
 /* Scale user_level in range [0..user_max] to [hw_min..hw_max]. */
-static inline u32 scale_user_to_hw(struct intel_connector *connector,
-				   u32 user_level, u32 user_max)
+static u32 scale_user_to_hw(struct intel_connector *connector,
+			    u32 user_level, u32 user_max)
 {
 	struct intel_panel *panel = &connector->panel;
 
@@ -495,8 +501,8 @@ static inline u32 scale_user_to_hw(struct intel_connector *connector,
 
 /* Scale user_level in range [0..user_max] to [0..hw_max], clamping the result
  * to [hw_min..hw_max]. */
-static inline u32 clamp_user_to_hw(struct intel_connector *connector,
-				   u32 user_level, u32 user_max)
+static u32 clamp_user_to_hw(struct intel_connector *connector,
+			    u32 user_level, u32 user_max)
 {
 	struct intel_panel *panel = &connector->panel;
 	u32 hw_level;
@@ -508,8 +514,8 @@ static inline u32 clamp_user_to_hw(struct intel_connector *connector,
 }
 
 /* Scale hw_level in range [hw_min..hw_max] to [0..user_max]. */
-static inline u32 scale_hw_to_user(struct intel_connector *connector,
-				   u32 hw_level, u32 user_max)
+static u32 scale_hw_to_user(struct intel_connector *connector,
+			    u32 hw_level, u32 user_max)
 {
 	struct intel_panel *panel = &connector->panel;
 
@@ -684,9 +690,10 @@ static void
 intel_panel_actually_set_backlight(const struct drm_connector_state *conn_state, u32 level)
 {
 	struct intel_connector *connector = to_intel_connector(conn_state->connector);
+	struct drm_i915_private *i915 = to_i915(connector->base.dev);
 	struct intel_panel *panel = &connector->panel;
 
-	DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level);
+	drm_dbg_kms(&i915->drm, "set backlight PWM = %d\n", level);
 
 	level = intel_panel_compute_brightness(connector, level);
 	panel->backlight.set(conn_state, level);
@@ -867,8 +874,8 @@ void intel_panel_disable_backlight(const struct drm_connector_state *old_conn_st
 	 * another client is not activated.
 	 */
 	if (dev_priv->drm.switch_power_state == DRM_SWITCH_POWER_CHANGING) {
-		drm_dbg(&dev_priv->drm,
-			"Skipping backlight disable on vga switch\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "Skipping backlight disable on vga switch\n");
 		return;
 	}
 
@@ -1244,7 +1251,7 @@ static u32 intel_panel_get_backlight(struct intel_connector *connector)
 
 	mutex_unlock(&dev_priv->backlight_lock);
 
-	drm_dbg(&dev_priv->drm, "get backlight PWM = %d\n", val);
+	drm_dbg_kms(&dev_priv->drm, "get backlight PWM = %d\n", val);
 	return val;
 }
 
@@ -1335,6 +1342,7 @@ static const struct backlight_ops intel_backlight_device_ops = {
 
 int intel_backlight_device_register(struct intel_connector *connector)
 {
+	struct drm_i915_private *i915 = to_i915(connector->base.dev);
 	struct intel_panel *panel = &connector->panel;
 	struct backlight_properties props;
 
@@ -1374,14 +1382,15 @@ int intel_backlight_device_register(struct intel_connector *connector)
 					  &intel_backlight_device_ops, &props);
 
 	if (IS_ERR(panel->backlight.device)) {
-		DRM_ERROR("Failed to register backlight: %ld\n",
-			  PTR_ERR(panel->backlight.device));
+		drm_err(&i915->drm, "Failed to register backlight: %ld\n",
+			PTR_ERR(panel->backlight.device));
 		panel->backlight.device = NULL;
 		return -ENODEV;
 	}
 
-	DRM_DEBUG_KMS("Connector %s backlight sysfs interface registered\n",
-		      connector->base.name);
+	drm_dbg_kms(&i915->drm,
+		    "Connector %s backlight sysfs interface registered\n",
+		    connector->base.name);
 
 	return 0;
 }
@@ -1931,7 +1940,8 @@ static int pwm_setup_backlight(struct intel_connector *connector,
 	return 0;
 }
 
-void intel_panel_update_backlight(struct intel_encoder *encoder,
+void intel_panel_update_backlight(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state)
 {
diff --git a/drivers/gpu/drm/i915/display/intel_panel.h b/drivers/gpu/drm/i915/display/intel_panel.h
index cedeea443336..968b95281cb4 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.h
+++ b/drivers/gpu/drm/i915/display/intel_panel.h
@@ -25,19 +25,18 @@ int intel_panel_init(struct intel_panel *panel,
 void intel_panel_fini(struct intel_panel *panel);
 void intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
 			    struct drm_display_mode *adjusted_mode);
-void intel_pch_panel_fitting(struct intel_crtc *crtc,
-			     struct intel_crtc_state *pipe_config,
-			     int fitting_mode);
-void intel_gmch_panel_fitting(struct intel_crtc *crtc,
-			      struct intel_crtc_state *pipe_config,
-			      int fitting_mode);
+int intel_pch_panel_fitting(struct intel_crtc_state *crtc_state,
+			    const struct drm_connector_state *conn_state);
+int intel_gmch_panel_fitting(struct intel_crtc_state *crtc_state,
+			     const struct drm_connector_state *conn_state);
 void intel_panel_set_backlight_acpi(const struct drm_connector_state *conn_state,
 				    u32 level, u32 max);
 int intel_panel_setup_backlight(struct drm_connector *connector,
 				enum pipe pipe);
 void intel_panel_enable_backlight(const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state);
-void intel_panel_update_backlight(struct intel_encoder *encoder,
+void intel_panel_update_backlight(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state);
 void intel_panel_disable_backlight(const struct drm_connector_state *old_conn_state);
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index fd9b146e3aba..a0569fdfeb16 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -137,41 +137,42 @@ static void psr_irq_control(struct drm_i915_private *dev_priv)
 	intel_de_write(dev_priv, imr_reg, val);
 }
 
-static void psr_event_print(u32 val, bool psr2_enabled)
+static void psr_event_print(struct drm_i915_private *i915,
+			    u32 val, bool psr2_enabled)
 {
-	DRM_DEBUG_KMS("PSR exit events: 0x%x\n", val);
+	drm_dbg_kms(&i915->drm, "PSR exit events: 0x%x\n", val);
 	if (val & PSR_EVENT_PSR2_WD_TIMER_EXPIRE)
-		DRM_DEBUG_KMS("\tPSR2 watchdog timer expired\n");
+		drm_dbg_kms(&i915->drm, "\tPSR2 watchdog timer expired\n");
 	if ((val & PSR_EVENT_PSR2_DISABLED) && psr2_enabled)
-		DRM_DEBUG_KMS("\tPSR2 disabled\n");
+		drm_dbg_kms(&i915->drm, "\tPSR2 disabled\n");
 	if (val & PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN)
-		DRM_DEBUG_KMS("\tSU dirty FIFO underrun\n");
+		drm_dbg_kms(&i915->drm, "\tSU dirty FIFO underrun\n");
 	if (val & PSR_EVENT_SU_CRC_FIFO_UNDERRUN)
-		DRM_DEBUG_KMS("\tSU CRC FIFO underrun\n");
+		drm_dbg_kms(&i915->drm, "\tSU CRC FIFO underrun\n");
 	if (val & PSR_EVENT_GRAPHICS_RESET)
-		DRM_DEBUG_KMS("\tGraphics reset\n");
+		drm_dbg_kms(&i915->drm, "\tGraphics reset\n");
 	if (val & PSR_EVENT_PCH_INTERRUPT)
-		DRM_DEBUG_KMS("\tPCH interrupt\n");
+		drm_dbg_kms(&i915->drm, "\tPCH interrupt\n");
 	if (val & PSR_EVENT_MEMORY_UP)
-		DRM_DEBUG_KMS("\tMemory up\n");
+		drm_dbg_kms(&i915->drm, "\tMemory up\n");
 	if (val & PSR_EVENT_FRONT_BUFFER_MODIFY)
-		DRM_DEBUG_KMS("\tFront buffer modification\n");
+		drm_dbg_kms(&i915->drm, "\tFront buffer modification\n");
 	if (val & PSR_EVENT_WD_TIMER_EXPIRE)
-		DRM_DEBUG_KMS("\tPSR watchdog timer expired\n");
+		drm_dbg_kms(&i915->drm, "\tPSR watchdog timer expired\n");
 	if (val & PSR_EVENT_PIPE_REGISTERS_UPDATE)
-		DRM_DEBUG_KMS("\tPIPE registers updated\n");
+		drm_dbg_kms(&i915->drm, "\tPIPE registers updated\n");
 	if (val & PSR_EVENT_REGISTER_UPDATE)
-		DRM_DEBUG_KMS("\tRegister updated\n");
+		drm_dbg_kms(&i915->drm, "\tRegister updated\n");
 	if (val & PSR_EVENT_HDCP_ENABLE)
-		DRM_DEBUG_KMS("\tHDCP enabled\n");
+		drm_dbg_kms(&i915->drm, "\tHDCP enabled\n");
 	if (val & PSR_EVENT_KVMR_SESSION_ENABLE)
-		DRM_DEBUG_KMS("\tKVMR session enabled\n");
+		drm_dbg_kms(&i915->drm, "\tKVMR session enabled\n");
 	if (val & PSR_EVENT_VBI_ENABLE)
-		DRM_DEBUG_KMS("\tVBI enabled\n");
+		drm_dbg_kms(&i915->drm, "\tVBI enabled\n");
 	if (val & PSR_EVENT_LPSP_MODE_EXIT)
-		DRM_DEBUG_KMS("\tLPSP mode exited\n");
+		drm_dbg_kms(&i915->drm, "\tLPSP mode exited\n");
 	if ((val & PSR_EVENT_PSR_DISABLE) && !psr2_enabled)
-		DRM_DEBUG_KMS("\tPSR disabled\n");
+		drm_dbg_kms(&i915->drm, "\tPSR disabled\n");
 }
 
 void intel_psr_irq_handler(struct drm_i915_private *dev_priv, u32 psr_iir)
@@ -209,7 +210,7 @@ void intel_psr_irq_handler(struct drm_i915_private *dev_priv, u32 psr_iir)
 
 			intel_de_write(dev_priv, PSR_EVENT(cpu_transcoder),
 				       val);
-			psr_event_print(val, psr2_enabled);
+			psr_event_print(dev_priv, val, psr2_enabled);
 		}
 	}
 
@@ -249,18 +250,21 @@ static bool intel_dp_get_alpm_status(struct intel_dp *intel_dp)
 
 static u8 intel_dp_get_sink_sync_latency(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 val = 8; /* assume the worst if we can't read the value */
 
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			      DP_SYNCHRONIZATION_LATENCY_IN_SINK, &val) == 1)
 		val &= DP_MAX_RESYNC_FRAME_COUNT_MASK;
 	else
-		DRM_DEBUG_KMS("Unable to get sink synchronization latency, assuming 8 frames\n");
+		drm_dbg_kms(&i915->drm,
+			    "Unable to get sink synchronization latency, assuming 8 frames\n");
 	return val;
 }
 
 static u16 intel_dp_get_su_x_granulartiy(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u16 val;
 	ssize_t r;
 
@@ -273,7 +277,8 @@ static u16 intel_dp_get_su_x_granulartiy(struct intel_dp *intel_dp)
 
 	r = drm_dp_dpcd_read(&intel_dp->aux, DP_PSR2_SU_X_GRANULARITY, &val, 2);
 	if (r != 2)
-		DRM_DEBUG_KMS("Unable to read DP_PSR2_SU_X_GRANULARITY\n");
+		drm_dbg_kms(&i915->drm,
+			    "Unable to read DP_PSR2_SU_X_GRANULARITY\n");
 
 	/*
 	 * Spec says that if the value read is 0 the default granularity should
diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
index 637d8fe2f8c2..bc6c26818e15 100644
--- a/drivers/gpu/drm/i915/display/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
@@ -1430,7 +1430,8 @@ static void intel_sdvo_update_props(struct intel_sdvo *intel_sdvo,
 #undef UPDATE_PROPERTY
 }
 
-static void intel_sdvo_pre_enable(struct intel_encoder *intel_encoder,
+static void intel_sdvo_pre_enable(struct intel_atomic_state *state,
+				  struct intel_encoder *intel_encoder,
 				  const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state)
 {
@@ -1727,7 +1728,8 @@ static void intel_sdvo_enable_audio(struct intel_sdvo *intel_sdvo,
 				   SDVO_AUDIO_PRESENCE_DETECT);
 }
 
-static void intel_disable_sdvo(struct intel_encoder *encoder,
+static void intel_disable_sdvo(struct intel_atomic_state *state,
+			       struct intel_encoder *encoder,
 			       const struct intel_crtc_state *old_crtc_state,
 			       const struct drm_connector_state *conn_state)
 {
@@ -1775,20 +1777,23 @@ static void intel_disable_sdvo(struct intel_encoder *encoder,
 	}
 }
 
-static void pch_disable_sdvo(struct intel_encoder *encoder,
+static void pch_disable_sdvo(struct intel_atomic_state *state,
+			     struct intel_encoder *encoder,
 			     const struct intel_crtc_state *old_crtc_state,
 			     const struct drm_connector_state *old_conn_state)
 {
 }
 
-static void pch_post_disable_sdvo(struct intel_encoder *encoder,
+static void pch_post_disable_sdvo(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *old_crtc_state,
 				  const struct drm_connector_state *old_conn_state)
 {
-	intel_disable_sdvo(encoder, old_crtc_state, old_conn_state);
+	intel_disable_sdvo(state, encoder, old_crtc_state, old_conn_state);
 }
 
-static void intel_enable_sdvo(struct intel_encoder *encoder,
+static void intel_enable_sdvo(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *pipe_config,
 			      const struct drm_connector_state *conn_state)
 {
@@ -1934,12 +1939,11 @@ static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
 
 static enum intel_hotplug_state
 intel_sdvo_hotplug(struct intel_encoder *encoder,
-		   struct intel_connector *connector,
-		   bool irq_received)
+		   struct intel_connector *connector)
 {
 	intel_sdvo_enable_hotplug(encoder);
 
-	return intel_encoder_hotplug(encoder, connector, irq_received);
+	return intel_encoder_hotplug(encoder, connector);
 }
 
 static bool
diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c b/drivers/gpu/drm/i915/display/intel_sprite.c
index 33d886141138..0000ec7055f7 100644
--- a/drivers/gpu/drm/i915/display/intel_sprite.c
+++ b/drivers/gpu/drm/i915/display/intel_sprite.c
@@ -2503,6 +2503,7 @@ static const u32 skl_plane_formats[] = {
 	DRM_FORMAT_YVYU,
 	DRM_FORMAT_UYVY,
 	DRM_FORMAT_VYUY,
+	DRM_FORMAT_XYUV8888,
 };
 
 static const u32 skl_planar_formats[] = {
@@ -2521,6 +2522,7 @@ static const u32 skl_planar_formats[] = {
 	DRM_FORMAT_UYVY,
 	DRM_FORMAT_VYUY,
 	DRM_FORMAT_NV12,
+	DRM_FORMAT_XYUV8888,
 };
 
 static const u32 glk_planar_formats[] = {
@@ -2539,6 +2541,7 @@ static const u32 glk_planar_formats[] = {
 	DRM_FORMAT_UYVY,
 	DRM_FORMAT_VYUY,
 	DRM_FORMAT_NV12,
+	DRM_FORMAT_XYUV8888,
 	DRM_FORMAT_P010,
 	DRM_FORMAT_P012,
 	DRM_FORMAT_P016,
@@ -2562,6 +2565,7 @@ static const u32 icl_sdr_y_plane_formats[] = {
 	DRM_FORMAT_Y210,
 	DRM_FORMAT_Y212,
 	DRM_FORMAT_Y216,
+	DRM_FORMAT_XYUV8888,
 	DRM_FORMAT_XVYU2101010,
 	DRM_FORMAT_XVYU12_16161616,
 	DRM_FORMAT_XVYU16161616,
@@ -2589,6 +2593,7 @@ static const u32 icl_sdr_uv_plane_formats[] = {
 	DRM_FORMAT_Y210,
 	DRM_FORMAT_Y212,
 	DRM_FORMAT_Y216,
+	DRM_FORMAT_XYUV8888,
 	DRM_FORMAT_XVYU2101010,
 	DRM_FORMAT_XVYU12_16161616,
 	DRM_FORMAT_XVYU16161616,
@@ -2620,6 +2625,7 @@ static const u32 icl_hdr_plane_formats[] = {
 	DRM_FORMAT_Y210,
 	DRM_FORMAT_Y212,
 	DRM_FORMAT_Y216,
+	DRM_FORMAT_XYUV8888,
 	DRM_FORMAT_XVYU2101010,
 	DRM_FORMAT_XVYU12_16161616,
 	DRM_FORMAT_XVYU16161616,
@@ -2790,6 +2796,7 @@ static bool skl_plane_format_mod_supported(struct drm_plane *_plane,
 	case DRM_FORMAT_UYVY:
 	case DRM_FORMAT_VYUY:
 	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_XYUV8888:
 	case DRM_FORMAT_P010:
 	case DRM_FORMAT_P012:
 	case DRM_FORMAT_P016:
@@ -2860,6 +2867,7 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,
 	case DRM_FORMAT_UYVY:
 	case DRM_FORMAT_VYUY:
 	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_XYUV8888:
 	case DRM_FORMAT_P010:
 	case DRM_FORMAT_P012:
 	case DRM_FORMAT_P016:
diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c
index 9b850c11aa78..d3bd5e798fbc 100644
--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -34,6 +34,7 @@ tc_port_load_fia_params(struct drm_i915_private *i915,
 	if (INTEL_INFO(i915)->display.has_modular_fia) {
 		modular_fia = intel_uncore_read(&i915->uncore,
 						PORT_TX_DFLEXDPSP(FIA1));
+		drm_WARN_ON(&i915->drm, modular_fia == 0xffffffff);
 		modular_fia &= MODULAR_FIA_MASK;
 	} else {
 		modular_fia = 0;
@@ -52,6 +53,62 @@ tc_port_load_fia_params(struct drm_i915_private *i915,
 	}
 }
 
+static enum intel_display_power_domain
+tc_cold_get_power_domain(struct intel_digital_port *dig_port)
+{
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+
+	if (INTEL_GEN(i915) == 11)
+		return intel_legacy_aux_to_power_domain(dig_port->aux_ch);
+	else
+		return POWER_DOMAIN_TC_COLD_OFF;
+}
+
+static intel_wakeref_t
+tc_cold_block(struct intel_digital_port *dig_port)
+{
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+	enum intel_display_power_domain domain;
+
+	if (INTEL_GEN(i915) == 11 && !dig_port->tc_legacy_port)
+		return 0;
+
+	domain = tc_cold_get_power_domain(dig_port);
+	return intel_display_power_get(i915, domain);
+}
+
+static void
+tc_cold_unblock(struct intel_digital_port *dig_port, intel_wakeref_t wakeref)
+{
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+	enum intel_display_power_domain domain;
+
+	/*
+	 * wakeref == -1, means some error happened saving save_depot_stack but
+	 * power should still be put down and 0 is a invalid save_depot_stack
+	 * id so can be used to skip it for non TC legacy ports.
+	 */
+	if (wakeref == 0)
+		return;
+
+	domain = tc_cold_get_power_domain(dig_port);
+	intel_display_power_put_async(i915, domain, wakeref);
+}
+
+static void
+assert_tc_cold_blocked(struct intel_digital_port *dig_port)
+{
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+	bool enabled;
+
+	if (INTEL_GEN(i915) == 11 && !dig_port->tc_legacy_port)
+		return;
+
+	enabled = intel_display_power_is_enabled(i915,
+						 tc_cold_get_power_domain(dig_port));
+	drm_WARN_ON(&i915->drm, !enabled);
+}
+
 u32 intel_tc_port_get_lane_mask(struct intel_digital_port *dig_port)
 {
 	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
@@ -62,6 +119,7 @@ u32 intel_tc_port_get_lane_mask(struct intel_digital_port *dig_port)
 				      PORT_TX_DFLEXDPSP(dig_port->tc_phy_fia));
 
 	drm_WARN_ON(&i915->drm, lane_mask == 0xffffffff);
+	assert_tc_cold_blocked(dig_port);
 
 	lane_mask &= DP_LANE_ASSIGNMENT_MASK(dig_port->tc_phy_fia_idx);
 	return lane_mask >> DP_LANE_ASSIGNMENT_SHIFT(dig_port->tc_phy_fia_idx);
@@ -77,6 +135,7 @@ u32 intel_tc_port_get_pin_assignment_mask(struct intel_digital_port *dig_port)
 				     PORT_TX_DFLEXPA1(dig_port->tc_phy_fia));
 
 	drm_WARN_ON(&i915->drm, pin_mask == 0xffffffff);
+	assert_tc_cold_blocked(dig_port);
 
 	return (pin_mask & DP_PIN_ASSIGNMENT_MASK(dig_port->tc_phy_fia_idx)) >>
 	       DP_PIN_ASSIGNMENT_SHIFT(dig_port->tc_phy_fia_idx);
@@ -91,6 +150,8 @@ int intel_tc_port_fia_max_lane_count(struct intel_digital_port *dig_port)
 	if (dig_port->tc_mode != TC_PORT_DP_ALT)
 		return 4;
 
+	assert_tc_cold_blocked(dig_port);
+
 	lane_mask = 0;
 	with_intel_display_power(i915, POWER_DOMAIN_DISPLAY_CORE, wakeref)
 		lane_mask = intel_tc_port_get_lane_mask(dig_port);
@@ -123,6 +184,8 @@ void intel_tc_port_set_fia_lane_count(struct intel_digital_port *dig_port,
 	drm_WARN_ON(&i915->drm,
 		    lane_reversal && dig_port->tc_mode != TC_PORT_LEGACY);
 
+	assert_tc_cold_blocked(dig_port);
+
 	val = intel_uncore_read(uncore,
 				PORT_TX_DFLEXDPMLE1(dig_port->tc_phy_fia));
 	val &= ~DFLEXDPMLE1_DPMLETC_MASK(dig_port->tc_phy_fia_idx);
@@ -152,6 +215,7 @@ void intel_tc_port_set_fia_lane_count(struct intel_digital_port *dig_port,
 static void tc_port_fixup_legacy_flag(struct intel_digital_port *dig_port,
 				      u32 live_status_mask)
 {
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
 	u32 valid_hpd_mask;
 
 	if (dig_port->tc_legacy_port)
@@ -164,8 +228,9 @@ static void tc_port_fixup_legacy_flag(struct intel_digital_port *dig_port,
 		return;
 
 	/* If live status mismatches the VBT flag, trust the live status. */
-	DRM_ERROR("Port %s: live status %08x mismatches the legacy port flag, fix flag\n",
-		  dig_port->tc_port_name, live_status_mask);
+	drm_err(&i915->drm,
+		"Port %s: live status %08x mismatches the legacy port flag, fix flag\n",
+		dig_port->tc_port_name, live_status_mask);
 
 	dig_port->tc_legacy_port = !dig_port->tc_legacy_port;
 }
@@ -233,8 +298,7 @@ static bool icl_tc_phy_set_safe_mode(struct intel_digital_port *dig_port,
 	if (val == 0xffffffff) {
 		drm_dbg_kms(&i915->drm,
 			    "Port %s: PHY in TCCOLD, can't set safe-mode to %s\n",
-			    dig_port->tc_port_name,
-			      enableddisabled(enable));
+			    dig_port->tc_port_name, enableddisabled(enable));
 
 		return false;
 	}
@@ -286,11 +350,12 @@ static bool icl_tc_phy_is_in_safe_mode(struct intel_digital_port *dig_port)
 static void icl_tc_phy_connect(struct intel_digital_port *dig_port,
 			       int required_lanes)
 {
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
 	int max_lanes;
 
 	if (!icl_tc_phy_status_complete(dig_port)) {
-		DRM_DEBUG_KMS("Port %s: PHY not ready\n",
-			      dig_port->tc_port_name);
+		drm_dbg_kms(&i915->drm, "Port %s: PHY not ready\n",
+			    dig_port->tc_port_name);
 		goto out_set_tbt_alt_mode;
 	}
 
@@ -311,15 +376,16 @@ static void icl_tc_phy_connect(struct intel_digital_port *dig_port,
 	 * became disconnected. Not necessary for legacy mode.
 	 */
 	if (!(tc_port_live_status_mask(dig_port) & BIT(TC_PORT_DP_ALT))) {
-		DRM_DEBUG_KMS("Port %s: PHY sudden disconnect\n",
-			      dig_port->tc_port_name);
+		drm_dbg_kms(&i915->drm, "Port %s: PHY sudden disconnect\n",
+			    dig_port->tc_port_name);
 		goto out_set_safe_mode;
 	}
 
 	if (max_lanes < required_lanes) {
-		DRM_DEBUG_KMS("Port %s: PHY max lanes %d < required lanes %d\n",
-			      dig_port->tc_port_name,
-			      max_lanes, required_lanes);
+		drm_dbg_kms(&i915->drm,
+			    "Port %s: PHY max lanes %d < required lanes %d\n",
+			    dig_port->tc_port_name,
+			    max_lanes, required_lanes);
 		goto out_set_safe_mode;
 	}
 
@@ -357,15 +423,17 @@ static void icl_tc_phy_disconnect(struct intel_digital_port *dig_port)
 
 static bool icl_tc_phy_is_connected(struct intel_digital_port *dig_port)
 {
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+
 	if (!icl_tc_phy_status_complete(dig_port)) {
-		DRM_DEBUG_KMS("Port %s: PHY status not complete\n",
-			      dig_port->tc_port_name);
+		drm_dbg_kms(&i915->drm, "Port %s: PHY status not complete\n",
+			    dig_port->tc_port_name);
 		return dig_port->tc_mode == TC_PORT_TBT_ALT;
 	}
 
 	if (icl_tc_phy_is_in_safe_mode(dig_port)) {
-		DRM_DEBUG_KMS("Port %s: PHY still in safe mode\n",
-			      dig_port->tc_port_name);
+		drm_dbg_kms(&i915->drm, "Port %s: PHY still in safe mode\n",
+			    dig_port->tc_port_name);
 
 		return false;
 	}
@@ -415,9 +483,14 @@ static void intel_tc_port_reset_mode(struct intel_digital_port *dig_port,
 	enum tc_port_mode old_tc_mode = dig_port->tc_mode;
 
 	intel_display_power_flush_work(i915);
-	drm_WARN_ON(&i915->drm,
-		    intel_display_power_is_enabled(i915,
-					intel_aux_power_domain(dig_port)));
+	if (INTEL_GEN(i915) != 11 || !dig_port->tc_legacy_port) {
+		enum intel_display_power_domain aux_domain;
+		bool aux_powered;
+
+		aux_domain = intel_aux_power_domain(dig_port);
+		aux_powered = intel_display_power_is_enabled(i915, aux_domain);
+		drm_WARN_ON(&i915->drm, aux_powered);
+	}
 
 	icl_tc_phy_disconnect(dig_port);
 	icl_tc_phy_connect(dig_port, required_lanes);
@@ -438,10 +511,13 @@ intel_tc_port_link_init_refcount(struct intel_digital_port *dig_port,
 
 void intel_tc_port_sanitize(struct intel_digital_port *dig_port)
 {
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
 	struct intel_encoder *encoder = &dig_port->base;
+	intel_wakeref_t tc_cold_wref;
 	int active_links = 0;
 
 	mutex_lock(&dig_port->tc_lock);
+	tc_cold_wref = tc_cold_block(dig_port);
 
 	dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port);
 	if (dig_port->dp.is_mst)
@@ -451,8 +527,9 @@ void intel_tc_port_sanitize(struct intel_digital_port *dig_port)
 
 	if (active_links) {
 		if (!icl_tc_phy_is_connected(dig_port))
-			DRM_DEBUG_KMS("Port %s: PHY disconnected with %d active link(s)\n",
-				      dig_port->tc_port_name, active_links);
+			drm_dbg_kms(&i915->drm,
+				    "Port %s: PHY disconnected with %d active link(s)\n",
+				    dig_port->tc_port_name, active_links);
 		intel_tc_port_link_init_refcount(dig_port, active_links);
 
 		goto out;
@@ -462,10 +539,11 @@ void intel_tc_port_sanitize(struct intel_digital_port *dig_port)
 		icl_tc_phy_connect(dig_port, 1);
 
 out:
-	DRM_DEBUG_KMS("Port %s: sanitize mode (%s)\n",
-		      dig_port->tc_port_name,
-		      tc_port_mode_name(dig_port->tc_mode));
+	drm_dbg_kms(&i915->drm, "Port %s: sanitize mode (%s)\n",
+		    dig_port->tc_port_name,
+		    tc_port_mode_name(dig_port->tc_mode));
 
+	tc_cold_unblock(dig_port, tc_cold_wref);
 	mutex_unlock(&dig_port->tc_lock);
 }
 
@@ -487,10 +565,15 @@ static bool intel_tc_port_needs_reset(struct intel_digital_port *dig_port)
 bool intel_tc_port_connected(struct intel_digital_port *dig_port)
 {
 	bool is_connected;
+	intel_wakeref_t tc_cold_wref;
 
 	intel_tc_port_lock(dig_port);
+	tc_cold_wref = tc_cold_block(dig_port);
+
 	is_connected = tc_port_live_status_mask(dig_port) &
 		       BIT(dig_port->tc_mode);
+
+	tc_cold_unblock(dig_port, tc_cold_wref);
 	intel_tc_port_unlock(dig_port);
 
 	return is_connected;
@@ -506,9 +589,16 @@ static void __intel_tc_port_lock(struct intel_digital_port *dig_port,
 
 	mutex_lock(&dig_port->tc_lock);
 
-	if (!dig_port->tc_link_refcount &&
-	    intel_tc_port_needs_reset(dig_port))
-		intel_tc_port_reset_mode(dig_port, required_lanes);
+	if (!dig_port->tc_link_refcount) {
+		intel_wakeref_t tc_cold_wref;
+
+		tc_cold_wref = tc_cold_block(dig_port);
+
+		if (intel_tc_port_needs_reset(dig_port))
+			intel_tc_port_reset_mode(dig_port, required_lanes);
+
+		tc_cold_unblock(dig_port, tc_cold_wref);
+	}
 
 	drm_WARN_ON(&i915->drm, dig_port->tc_lock_wakeref);
 	dig_port->tc_lock_wakeref = wakeref;
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index d2e3a3a323e9..fbe12aad7d58 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -914,7 +914,8 @@ intel_tv_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe)
 }
 
 static void
-intel_enable_tv(struct intel_encoder *encoder,
+intel_enable_tv(struct intel_atomic_state *state,
+		struct intel_encoder *encoder,
 		const struct intel_crtc_state *pipe_config,
 		const struct drm_connector_state *conn_state)
 {
@@ -930,7 +931,8 @@ intel_enable_tv(struct intel_encoder *encoder,
 }
 
 static void
-intel_disable_tv(struct intel_encoder *encoder,
+intel_disable_tv(struct intel_atomic_state *state,
+		 struct intel_encoder *encoder,
 		 const struct intel_crtc_state *old_crtc_state,
 		 const struct drm_connector_state *old_conn_state)
 {
@@ -1414,7 +1416,8 @@ static void set_color_conversion(struct drm_i915_private *dev_priv,
 		       (color_conversion->bv << 16) | color_conversion->av);
 }
 
-static void intel_tv_pre_enable(struct intel_encoder *encoder,
+static void intel_tv_pre_enable(struct intel_atomic_state *state,
+				struct intel_encoder *encoder,
 				const struct intel_crtc_state *pipe_config,
 				const struct drm_connector_state *conn_state)
 {
@@ -1698,13 +1701,13 @@ intel_tv_detect(struct drm_connector *connector,
 		struct drm_modeset_acquire_ctx *ctx,
 		bool force)
 {
+	struct drm_i915_private *i915 = to_i915(connector->dev);
 	struct intel_tv *intel_tv = intel_attached_tv(to_intel_connector(connector));
 	enum drm_connector_status status;
 	int type;
 
-	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
-		      connector->base.id, connector->name,
-		      force);
+	drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] force=%d\n",
+		    connector->base.id, connector->name, force);
 
 	if (force) {
 		struct intel_load_detect_pipe tmp;
diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
index 05c7cbe32eb4..aef7fe932d1a 100644
--- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
+++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
@@ -462,7 +462,7 @@ struct bdb_general_definitions {
 	 * number = (block_size - sizeof(bdb_general_definitions))/
 	 *	     defs->child_dev_size;
 	 */
-	u8 devices[0];
+	u8 devices[];
 } __packed;
 
 /*
@@ -839,7 +839,7 @@ struct bdb_mipi_config {
 
 struct bdb_mipi_sequence {
 	u8 version;
-	u8 data[0]; /* up to 6 variable length blocks */
+	u8 data[]; /* up to 6 variable length blocks */
 } __packed;
 
 /*
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index f4c362dc6e15..f582ab52f0b0 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -267,7 +267,6 @@ static int intel_dsi_compute_config(struct intel_encoder *encoder,
 	struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
 						   base);
 	struct intel_connector *intel_connector = intel_dsi->attached_connector;
-	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
 	const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
 	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
 	int ret;
@@ -279,11 +278,11 @@ static int intel_dsi_compute_config(struct intel_encoder *encoder,
 		intel_fixed_panel_mode(fixed_mode, adjusted_mode);
 
 		if (HAS_GMCH(dev_priv))
-			intel_gmch_panel_fitting(crtc, pipe_config,
-						 conn_state->scaling_mode);
+			ret = intel_gmch_panel_fitting(pipe_config, conn_state);
 		else
-			intel_pch_panel_fitting(crtc, pipe_config,
-						conn_state->scaling_mode);
+			ret = intel_pch_panel_fitting(pipe_config, conn_state);
+		if (ret)
+			return ret;
 	}
 
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
@@ -759,7 +758,8 @@ static void intel_dsi_unprepare(struct intel_encoder *encoder);
  * DSI port enable has to be done before pipe and plane enable, so we do it in
  * the pre_enable hook instead of the enable hook.
  */
-static void intel_dsi_pre_enable(struct intel_encoder *encoder,
+static void intel_dsi_pre_enable(struct intel_atomic_state *state,
+				 struct intel_encoder *encoder,
 				 const struct intel_crtc_state *pipe_config,
 				 const struct drm_connector_state *conn_state)
 {
@@ -858,11 +858,12 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
 	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_ON);
 }
 
-static void bxt_dsi_enable(struct intel_encoder *encoder,
+static void bxt_dsi_enable(struct intel_atomic_state *state,
+			   struct intel_encoder *encoder,
 			   const struct intel_crtc_state *crtc_state,
 			   const struct drm_connector_state *conn_state)
 {
-	WARN_ON(crtc_state->has_pch_encoder);
+	drm_WARN_ON(state->base.dev, crtc_state->has_pch_encoder);
 
 	intel_crtc_vblank_on(crtc_state);
 }
@@ -871,14 +872,16 @@ static void bxt_dsi_enable(struct intel_encoder *encoder,
  * DSI port disable has to be done after pipe and plane disable, so we do it in
  * the post_disable hook.
  */
-static void intel_dsi_disable(struct intel_encoder *encoder,
+static void intel_dsi_disable(struct intel_atomic_state *state,
+			      struct intel_encoder *encoder,
 			      const struct intel_crtc_state *old_crtc_state,
 			      const struct drm_connector_state *old_conn_state)
 {
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
 	enum port port;
 
-	DRM_DEBUG_KMS("\n");
+	drm_dbg_kms(&i915->drm, "\n");
 
 	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
 	intel_panel_disable_backlight(old_conn_state);
@@ -906,7 +909,8 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
 		vlv_dsi_clear_device_ready(encoder);
 }
 
-static void intel_dsi_post_disable(struct intel_encoder *encoder,
+static void intel_dsi_post_disable(struct intel_atomic_state *state,
+				   struct intel_encoder *encoder,
 				   const struct intel_crtc_state *old_crtc_state,
 				   const struct drm_connector_state *old_conn_state)
 {
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_context.c b/drivers/gpu/drm/i915/gem/i915_gem_context.c
index 68326ad3b2e0..900ea8b7fc8f 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_context.c
@@ -130,9 +130,7 @@ static void lut_close(struct i915_gem_context *ctx)
 		if (&lut->obj_link != &obj->lut_list) {
 			i915_lut_handle_free(lut);
 			radix_tree_iter_delete(&ctx->handles_vma, &iter, slot);
-			if (atomic_dec_and_test(&vma->open_count) &&
-			    !i915_vma_is_ggtt(vma))
-				i915_vma_close(vma);
+			i915_vma_close(vma);
 			i915_gem_object_put(obj);
 		}
 
@@ -570,23 +568,19 @@ static void engines_idle_release(struct i915_gem_context *ctx,
 	engines->ctx = i915_gem_context_get(ctx);
 
 	for_each_gem_engine(ce, engines, it) {
-		struct dma_fence *fence;
-		int err = 0;
+		int err;
 
 		/* serialises with execbuf */
 		set_bit(CONTEXT_CLOSED_BIT, &ce->flags);
 		if (!intel_context_pin_if_active(ce))
 			continue;
 
-		fence = i915_active_fence_get(&ce->timeline->last_request);
-		if (fence) {
-			err = i915_sw_fence_await_dma_fence(&engines->fence,
-							    fence, 0,
-							    GFP_KERNEL);
-			dma_fence_put(fence);
-		}
+		/* Wait until context is finally scheduled out and retired */
+		err = i915_sw_fence_await_active(&engines->fence,
+						 &ce->active,
+						 I915_ACTIVE_AWAIT_BARRIER);
 		intel_context_unpin(ce);
-		if (err < 0)
+		if (err)
 			goto kill;
 	}
 
@@ -757,21 +751,46 @@ __create_context(struct drm_i915_private *i915)
 	return ERR_PTR(err);
 }
 
+static inline struct i915_gem_engines *
+__context_engines_await(const struct i915_gem_context *ctx)
+{
+	struct i915_gem_engines *engines;
+
+	rcu_read_lock();
+	do {
+		engines = rcu_dereference(ctx->engines);
+		GEM_BUG_ON(!engines);
+
+		if (unlikely(!i915_sw_fence_await(&engines->fence)))
+			continue;
+
+		if (likely(engines == rcu_access_pointer(ctx->engines)))
+			break;
+
+		i915_sw_fence_complete(&engines->fence);
+	} while (1);
+	rcu_read_unlock();
+
+	return engines;
+}
+
 static int
 context_apply_all(struct i915_gem_context *ctx,
 		  int (*fn)(struct intel_context *ce, void *data),
 		  void *data)
 {
 	struct i915_gem_engines_iter it;
+	struct i915_gem_engines *e;
 	struct intel_context *ce;
 	int err = 0;
 
-	for_each_gem_engine(ce, i915_gem_context_lock_engines(ctx), it) {
+	e = __context_engines_await(ctx);
+	for_each_gem_engine(ce, e, it) {
 		err = fn(ce, data);
 		if (err)
 			break;
 	}
-	i915_gem_context_unlock_engines(ctx);
+	i915_sw_fence_complete(&e->fence);
 
 	return err;
 }
@@ -786,11 +805,13 @@ static int __apply_ppgtt(struct intel_context *ce, void *vm)
 static struct i915_address_space *
 __set_ppgtt(struct i915_gem_context *ctx, struct i915_address_space *vm)
 {
-	struct i915_address_space *old = i915_gem_context_vm(ctx);
+	struct i915_address_space *old;
 
+	old = rcu_replace_pointer(ctx->vm,
+				  i915_vm_open(vm),
+				  lockdep_is_held(&ctx->mutex));
 	GEM_BUG_ON(old && i915_vm_is_4lvl(vm) != i915_vm_is_4lvl(old));
 
-	rcu_assign_pointer(ctx->vm, i915_vm_open(vm));
 	context_apply_all(ctx, __apply_ppgtt, vm);
 
 	return old;
@@ -1069,30 +1090,6 @@ static void cb_retire(struct i915_active *base)
 	kfree(cb);
 }
 
-static inline struct i915_gem_engines *
-__context_engines_await(const struct i915_gem_context *ctx)
-{
-	struct i915_gem_engines *engines;
-
-	rcu_read_lock();
-	do {
-		engines = rcu_dereference(ctx->engines);
-		if (unlikely(!engines))
-			break;
-
-		if (unlikely(!i915_sw_fence_await(&engines->fence)))
-			continue;
-
-		if (likely(engines == rcu_access_pointer(ctx->engines)))
-			break;
-
-		i915_sw_fence_complete(&engines->fence);
-	} while (1);
-	rcu_read_unlock();
-
-	return engines;
-}
-
 I915_SELFTEST_DECLARE(static intel_engine_mask_t context_barrier_inject_fault);
 static int context_barrier_task(struct i915_gem_context *ctx,
 				intel_engine_mask_t engines,
@@ -1401,10 +1398,10 @@ static int get_ringsize(struct i915_gem_context *ctx,
 	return 0;
 }
 
-static int
-user_to_context_sseu(struct drm_i915_private *i915,
-		     const struct drm_i915_gem_context_param_sseu *user,
-		     struct intel_sseu *context)
+int
+i915_gem_user_to_context_sseu(struct drm_i915_private *i915,
+			      const struct drm_i915_gem_context_param_sseu *user,
+			      struct intel_sseu *context)
 {
 	const struct sseu_dev_info *device = &RUNTIME_INFO(i915)->sseu;
 
@@ -1539,7 +1536,7 @@ static int set_sseu(struct i915_gem_context *ctx,
 		goto out_ce;
 	}
 
-	ret = user_to_context_sseu(i915, &user_sseu, &sseu);
+	ret = i915_gem_user_to_context_sseu(i915, &user_sseu, &sseu);
 	if (ret)
 		goto out_ce;
 
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_context.h b/drivers/gpu/drm/i915/gem/i915_gem_context.h
index f1d884d304bd..3702b2fb27ab 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_context.h
+++ b/drivers/gpu/drm/i915/gem/i915_gem_context.h
@@ -225,4 +225,8 @@ i915_gem_engines_iter_next(struct i915_gem_engines_iter *it);
 struct i915_lut_handle *i915_lut_handle_alloc(void);
 void i915_lut_handle_free(struct i915_lut_handle *lut);
 
+int i915_gem_user_to_context_sseu(struct drm_i915_private *i915,
+				  const struct drm_i915_gem_context_param_sseu *user,
+				  struct intel_sseu *context);
+
 #endif /* !__I915_GEM_CONTEXT_H__ */
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_domain.c b/drivers/gpu/drm/i915/gem/i915_gem_domain.c
index 0cc40e77bbd2..7f76fc68f498 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_domain.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_domain.c
@@ -368,8 +368,7 @@ static void i915_gem_object_bump_inactive_ggtt(struct drm_i915_gem_object *obj)
 	struct drm_i915_private *i915 = to_i915(obj->base.dev);
 	struct i915_vma *vma;
 
-	GEM_BUG_ON(!i915_gem_object_has_pinned_pages(obj));
-	if (!atomic_read(&obj->bind_count))
+	if (list_empty(&obj->vma.list))
 		return;
 
 	mutex_lock(&i915->ggtt.vm.mutex);
@@ -400,12 +399,8 @@ static void i915_gem_object_bump_inactive_ggtt(struct drm_i915_gem_object *obj)
 void
 i915_gem_object_unpin_from_display_plane(struct i915_vma *vma)
 {
-	struct drm_i915_gem_object *obj = vma->obj;
-
-	assert_object_held(obj);
-
 	/* Bump the LRU to try and avoid premature eviction whilst flipping  */
-	i915_gem_object_bump_inactive_ggtt(obj);
+	i915_gem_object_bump_inactive_ggtt(vma->obj);
 
 	i915_vma_unpin(vma);
 }
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
index b7440f06c5e2..964f73f062c1 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
@@ -40,6 +40,11 @@ struct eb_vma {
 	u32 handle;
 };
 
+struct eb_vma_array {
+	struct kref kref;
+	struct eb_vma vma[];
+};
+
 enum {
 	FORCE_CPU_RELOC = 1,
 	FORCE_GTT_RELOC,
@@ -52,7 +57,6 @@ enum {
 #define __EXEC_OBJECT_NEEDS_MAP		BIT(29)
 #define __EXEC_OBJECT_NEEDS_BIAS	BIT(28)
 #define __EXEC_OBJECT_INTERNAL_FLAGS	(~0u << 28) /* all of the above */
-#define __EXEC_OBJECT_RESERVED (__EXEC_OBJECT_HAS_PIN | __EXEC_OBJECT_HAS_FENCE)
 
 #define __EXEC_HAS_RELOC	BIT(31)
 #define __EXEC_INTERNAL_FLAGS	(~0u << 31)
@@ -283,6 +287,7 @@ struct i915_execbuffer {
 	 */
 	int lut_size;
 	struct hlist_head *buckets; /** ht for relocation handles */
+	struct eb_vma_array *array;
 };
 
 static inline bool eb_use_cmdparser(const struct i915_execbuffer *eb)
@@ -292,8 +297,62 @@ static inline bool eb_use_cmdparser(const struct i915_execbuffer *eb)
 		 eb->args->batch_len);
 }
 
+static struct eb_vma_array *eb_vma_array_create(unsigned int count)
+{
+	struct eb_vma_array *arr;
+
+	arr = kvmalloc(struct_size(arr, vma, count), GFP_KERNEL | __GFP_NOWARN);
+	if (!arr)
+		return NULL;
+
+	kref_init(&arr->kref);
+	arr->vma[0].vma = NULL;
+
+	return arr;
+}
+
+static inline void eb_unreserve_vma(struct eb_vma *ev)
+{
+	struct i915_vma *vma = ev->vma;
+
+	if (unlikely(ev->flags & __EXEC_OBJECT_HAS_FENCE))
+		__i915_vma_unpin_fence(vma);
+
+	if (ev->flags & __EXEC_OBJECT_HAS_PIN)
+		__i915_vma_unpin(vma);
+
+	ev->flags &= ~(__EXEC_OBJECT_HAS_PIN |
+		       __EXEC_OBJECT_HAS_FENCE);
+}
+
+static void eb_vma_array_destroy(struct kref *kref)
+{
+	struct eb_vma_array *arr = container_of(kref, typeof(*arr), kref);
+	struct eb_vma *ev = arr->vma;
+
+	while (ev->vma) {
+		eb_unreserve_vma(ev);
+		i915_vma_put(ev->vma);
+		ev++;
+	}
+
+	kvfree(arr);
+}
+
+static void eb_vma_array_put(struct eb_vma_array *arr)
+{
+	kref_put(&arr->kref, eb_vma_array_destroy);
+}
+
 static int eb_create(struct i915_execbuffer *eb)
 {
+	/* Allocate an extra slot for use by the command parser + sentinel */
+	eb->array = eb_vma_array_create(eb->buffer_count + 2);
+	if (!eb->array)
+		return -ENOMEM;
+
+	eb->vma = eb->array->vma;
+
 	if (!(eb->args->flags & I915_EXEC_HANDLE_LUT)) {
 		unsigned int size = 1 + ilog2(eb->buffer_count);
 
@@ -327,8 +386,10 @@ static int eb_create(struct i915_execbuffer *eb)
 				break;
 		} while (--size);
 
-		if (unlikely(!size))
+		if (unlikely(!size)) {
+			eb_vma_array_put(eb->array);
 			return -ENOMEM;
+		}
 
 		eb->lut_size = size;
 	} else {
@@ -368,6 +429,32 @@ eb_vma_misplaced(const struct drm_i915_gem_exec_object2 *entry,
 	return false;
 }
 
+static u64 eb_pin_flags(const struct drm_i915_gem_exec_object2 *entry,
+			unsigned int exec_flags)
+{
+	u64 pin_flags = 0;
+
+	if (exec_flags & EXEC_OBJECT_NEEDS_GTT)
+		pin_flags |= PIN_GLOBAL;
+
+	/*
+	 * Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset,
+	 * limit address to the first 4GBs for unflagged objects.
+	 */
+	if (!(exec_flags & EXEC_OBJECT_SUPPORTS_48B_ADDRESS))
+		pin_flags |= PIN_ZONE_4G;
+
+	if (exec_flags & __EXEC_OBJECT_NEEDS_MAP)
+		pin_flags |= PIN_MAPPABLE;
+
+	if (exec_flags & EXEC_OBJECT_PINNED)
+		pin_flags |= entry->offset | PIN_OFFSET_FIXED;
+	else if (exec_flags & __EXEC_OBJECT_NEEDS_BIAS)
+		pin_flags |= BATCH_OFFSET_BIAS | PIN_OFFSET_BIAS;
+
+	return pin_flags;
+}
+
 static inline bool
 eb_pin_vma(struct i915_execbuffer *eb,
 	   const struct drm_i915_gem_exec_object2 *entry,
@@ -385,8 +472,19 @@ eb_pin_vma(struct i915_execbuffer *eb,
 	if (unlikely(ev->flags & EXEC_OBJECT_NEEDS_GTT))
 		pin_flags |= PIN_GLOBAL;
 
-	if (unlikely(i915_vma_pin(vma, 0, 0, pin_flags)))
-		return false;
+	/* Attempt to reuse the current location if available */
+	if (unlikely(i915_vma_pin(vma, 0, 0, pin_flags))) {
+		if (entry->flags & EXEC_OBJECT_PINNED)
+			return false;
+
+		/* Failing that pick any _free_ space if suitable */
+		if (unlikely(i915_vma_pin(vma,
+					  entry->pad_to_size,
+					  entry->alignment,
+					  eb_pin_flags(entry, ev->flags) |
+					  PIN_USER | PIN_NOEVICT)))
+			return false;
+	}
 
 	if (unlikely(ev->flags & EXEC_OBJECT_NEEDS_FENCE)) {
 		if (unlikely(i915_vma_pin_fence(vma))) {
@@ -402,26 +500,6 @@ eb_pin_vma(struct i915_execbuffer *eb,
 	return !eb_vma_misplaced(entry, vma, ev->flags);
 }
 
-static inline void __eb_unreserve_vma(struct i915_vma *vma, unsigned int flags)
-{
-	GEM_BUG_ON(!(flags & __EXEC_OBJECT_HAS_PIN));
-
-	if (unlikely(flags & __EXEC_OBJECT_HAS_FENCE))
-		__i915_vma_unpin_fence(vma);
-
-	__i915_vma_unpin(vma);
-}
-
-static inline void
-eb_unreserve_vma(struct eb_vma *ev)
-{
-	if (!(ev->flags & __EXEC_OBJECT_HAS_PIN))
-		return;
-
-	__eb_unreserve_vma(ev->vma, ev->flags);
-	ev->flags &= ~__EXEC_OBJECT_RESERVED;
-}
-
 static int
 eb_validate_vma(struct i915_execbuffer *eb,
 		struct drm_i915_gem_exec_object2 *entry,
@@ -481,7 +559,7 @@ eb_add_vma(struct i915_execbuffer *eb,
 
 	GEM_BUG_ON(i915_vma_is_closed(vma));
 
-	ev->vma = i915_vma_get(vma);
+	ev->vma = vma;
 	ev->exec = entry;
 	ev->flags = entry->flags;
 
@@ -547,28 +625,9 @@ static int eb_reserve_vma(const struct i915_execbuffer *eb,
 			  u64 pin_flags)
 {
 	struct drm_i915_gem_exec_object2 *entry = ev->exec;
-	unsigned int exec_flags = ev->flags;
 	struct i915_vma *vma = ev->vma;
 	int err;
 
-	if (exec_flags & EXEC_OBJECT_NEEDS_GTT)
-		pin_flags |= PIN_GLOBAL;
-
-	/*
-	 * Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset,
-	 * limit address to the first 4GBs for unflagged objects.
-	 */
-	if (!(exec_flags & EXEC_OBJECT_SUPPORTS_48B_ADDRESS))
-		pin_flags |= PIN_ZONE_4G;
-
-	if (exec_flags & __EXEC_OBJECT_NEEDS_MAP)
-		pin_flags |= PIN_MAPPABLE;
-
-	if (exec_flags & EXEC_OBJECT_PINNED)
-		pin_flags |= entry->offset | PIN_OFFSET_FIXED;
-	else if (exec_flags & __EXEC_OBJECT_NEEDS_BIAS)
-		pin_flags |= BATCH_OFFSET_BIAS | PIN_OFFSET_BIAS;
-
 	if (drm_mm_node_allocated(&vma->node) &&
 	    eb_vma_misplaced(entry, vma, ev->flags)) {
 		err = i915_vma_unbind(vma);
@@ -578,7 +637,7 @@ static int eb_reserve_vma(const struct i915_execbuffer *eb,
 
 	err = i915_vma_pin(vma,
 			   entry->pad_to_size, entry->alignment,
-			   pin_flags);
+			   eb_pin_flags(entry, ev->flags) | pin_flags);
 	if (err)
 		return err;
 
@@ -587,7 +646,7 @@ static int eb_reserve_vma(const struct i915_execbuffer *eb,
 		eb->args->flags |= __EXEC_HAS_RELOC;
 	}
 
-	if (unlikely(exec_flags & EXEC_OBJECT_NEEDS_FENCE)) {
+	if (unlikely(ev->flags & EXEC_OBJECT_NEEDS_FENCE)) {
 		err = i915_vma_pin_fence(vma);
 		if (unlikely(err)) {
 			i915_vma_unpin(vma);
@@ -595,10 +654,10 @@ static int eb_reserve_vma(const struct i915_execbuffer *eb,
 		}
 
 		if (vma->fence)
-			exec_flags |= __EXEC_OBJECT_HAS_FENCE;
+			ev->flags |= __EXEC_OBJECT_HAS_FENCE;
 	}
 
-	ev->flags = exec_flags | __EXEC_OBJECT_HAS_PIN;
+	ev->flags |= __EXEC_OBJECT_HAS_PIN;
 	GEM_BUG_ON(eb_vma_misplaced(entry, vma, ev->flags));
 
 	return 0;
@@ -728,77 +787,117 @@ static int eb_select_context(struct i915_execbuffer *eb)
 	return 0;
 }
 
-static int eb_lookup_vmas(struct i915_execbuffer *eb)
+static int __eb_add_lut(struct i915_execbuffer *eb,
+			u32 handle, struct i915_vma *vma)
 {
-	struct radix_tree_root *handles_vma = &eb->gem_context->handles_vma;
-	struct drm_i915_gem_object *obj;
-	unsigned int i, batch;
+	struct i915_gem_context *ctx = eb->gem_context;
+	struct i915_lut_handle *lut;
 	int err;
 
-	if (unlikely(i915_gem_context_is_closed(eb->gem_context)))
-		return -ENOENT;
+	lut = i915_lut_handle_alloc();
+	if (unlikely(!lut))
+		return -ENOMEM;
 
-	INIT_LIST_HEAD(&eb->relocs);
-	INIT_LIST_HEAD(&eb->unbound);
+	i915_vma_get(vma);
+	if (!atomic_fetch_inc(&vma->open_count))
+		i915_vma_reopen(vma);
+	lut->handle = handle;
+	lut->ctx = ctx;
+
+	/* Check that the context hasn't been closed in the meantime */
+	err = -EINTR;
+	if (!mutex_lock_interruptible(&ctx->mutex)) {
+		err = -ENOENT;
+		if (likely(!i915_gem_context_is_closed(ctx)))
+			err = radix_tree_insert(&ctx->handles_vma, handle, vma);
+		if (err == 0) { /* And nor has this handle */
+			struct drm_i915_gem_object *obj = vma->obj;
+
+			i915_gem_object_lock(obj);
+			if (idr_find(&eb->file->object_idr, handle) == obj) {
+				list_add(&lut->obj_link, &obj->lut_list);
+			} else {
+				radix_tree_delete(&ctx->handles_vma, handle);
+				err = -ENOENT;
+			}
+			i915_gem_object_unlock(obj);
+		}
+		mutex_unlock(&ctx->mutex);
+	}
+	if (unlikely(err))
+		goto err;
 
-	batch = eb_batch_index(eb);
+	return 0;
 
-	for (i = 0; i < eb->buffer_count; i++) {
-		u32 handle = eb->exec[i].handle;
-		struct i915_lut_handle *lut;
+err:
+	i915_vma_close(vma);
+	i915_vma_put(vma);
+	i915_lut_handle_free(lut);
+	return err;
+}
+
+static struct i915_vma *eb_lookup_vma(struct i915_execbuffer *eb, u32 handle)
+{
+	do {
+		struct drm_i915_gem_object *obj;
 		struct i915_vma *vma;
+		int err;
 
-		vma = radix_tree_lookup(handles_vma, handle);
+		rcu_read_lock();
+		vma = radix_tree_lookup(&eb->gem_context->handles_vma, handle);
+		if (likely(vma))
+			vma = i915_vma_tryget(vma);
+		rcu_read_unlock();
 		if (likely(vma))
-			goto add_vma;
+			return vma;
 
 		obj = i915_gem_object_lookup(eb->file, handle);
-		if (unlikely(!obj)) {
-			err = -ENOENT;
-			goto err_vma;
-		}
+		if (unlikely(!obj))
+			return ERR_PTR(-ENOENT);
 
 		vma = i915_vma_instance(obj, eb->context->vm, NULL);
 		if (IS_ERR(vma)) {
-			err = PTR_ERR(vma);
-			goto err_obj;
+			i915_gem_object_put(obj);
+			return vma;
 		}
 
-		lut = i915_lut_handle_alloc();
-		if (unlikely(!lut)) {
-			err = -ENOMEM;
-			goto err_obj;
-		}
+		err = __eb_add_lut(eb, handle, vma);
+		if (likely(!err))
+			return vma;
 
-		err = radix_tree_insert(handles_vma, handle, vma);
-		if (unlikely(err)) {
-			i915_lut_handle_free(lut);
-			goto err_obj;
-		}
+		i915_gem_object_put(obj);
+		if (err != -EEXIST)
+			return ERR_PTR(err);
+	} while (1);
+}
 
-		/* transfer ref to lut */
-		if (!atomic_fetch_inc(&vma->open_count))
-			i915_vma_reopen(vma);
-		lut->handle = handle;
-		lut->ctx = eb->gem_context;
+static int eb_lookup_vmas(struct i915_execbuffer *eb)
+{
+	unsigned int batch = eb_batch_index(eb);
+	unsigned int i;
+	int err = 0;
 
-		i915_gem_object_lock(obj);
-		list_add(&lut->obj_link, &obj->lut_list);
-		i915_gem_object_unlock(obj);
+	INIT_LIST_HEAD(&eb->relocs);
+	INIT_LIST_HEAD(&eb->unbound);
+
+	for (i = 0; i < eb->buffer_count; i++) {
+		struct i915_vma *vma;
+
+		vma = eb_lookup_vma(eb, eb->exec[i].handle);
+		if (IS_ERR(vma)) {
+			err = PTR_ERR(vma);
+			break;
+		}
 
-add_vma:
 		err = eb_validate_vma(eb, &eb->exec[i], vma);
-		if (unlikely(err))
-			goto err_vma;
+		if (unlikely(err)) {
+			i915_vma_put(vma);
+			break;
+		}
 
 		eb_add_vma(eb, i, batch, vma);
 	}
 
-	return 0;
-
-err_obj:
-	i915_gem_object_put(obj);
-err_vma:
 	eb->vma[i].vma = NULL;
 	return err;
 }
@@ -823,31 +922,13 @@ eb_get_vma(const struct i915_execbuffer *eb, unsigned long handle)
 	}
 }
 
-static void eb_release_vmas(const struct i915_execbuffer *eb)
-{
-	const unsigned int count = eb->buffer_count;
-	unsigned int i;
-
-	for (i = 0; i < count; i++) {
-		struct eb_vma *ev = &eb->vma[i];
-		struct i915_vma *vma = ev->vma;
-
-		if (!vma)
-			break;
-
-		eb->vma[i].vma = NULL;
-
-		if (ev->flags & __EXEC_OBJECT_HAS_PIN)
-			__eb_unreserve_vma(vma, ev->flags);
-
-		i915_vma_put(vma);
-	}
-}
-
 static void eb_destroy(const struct i915_execbuffer *eb)
 {
 	GEM_BUG_ON(eb->reloc_cache.rq);
 
+	if (eb->array)
+		eb_vma_array_put(eb->array);
+
 	if (eb->lut_size > 0)
 		kfree(eb->buckets);
 }
@@ -1220,6 +1301,17 @@ static u32 *reloc_gpu(struct i915_execbuffer *eb,
 	return cmd;
 }
 
+static inline bool use_reloc_gpu(struct i915_vma *vma)
+{
+	if (DBG_FORCE_RELOC == FORCE_GPU_RELOC)
+		return true;
+
+	if (DBG_FORCE_RELOC)
+		return false;
+
+	return !dma_resv_test_signaled_rcu(vma->resv, true);
+}
+
 static u64
 relocate_entry(struct i915_vma *vma,
 	       const struct drm_i915_gem_relocation_entry *reloc,
@@ -1231,9 +1323,7 @@ relocate_entry(struct i915_vma *vma,
 	bool wide = eb->reloc_cache.use_64bit_reloc;
 	void *vaddr;
 
-	if (!eb->reloc_cache.vaddr &&
-	    (DBG_FORCE_RELOC == FORCE_GPU_RELOC ||
-	     !dma_resv_test_signaled_rcu(vma->resv, true))) {
+	if (!eb->reloc_cache.vaddr && use_reloc_gpu(vma)) {
 		const unsigned int gen = eb->reloc_cache.gen;
 		unsigned int len;
 		u32 *batch;
@@ -1411,12 +1501,11 @@ static int eb_relocate_vma(struct i915_execbuffer *eb, struct eb_vma *ev)
 {
 #define N_RELOC(x) ((x) / sizeof(struct drm_i915_gem_relocation_entry))
 	struct drm_i915_gem_relocation_entry stack[N_RELOC(512)];
-	struct drm_i915_gem_relocation_entry __user *urelocs;
 	const struct drm_i915_gem_exec_object2 *entry = ev->exec;
-	unsigned int remain;
+	struct drm_i915_gem_relocation_entry __user *urelocs =
+		u64_to_user_ptr(entry->relocs_ptr);
+	unsigned long remain = entry->relocation_count;
 
-	urelocs = u64_to_user_ptr(entry->relocs_ptr);
-	remain = entry->relocation_count;
 	if (unlikely(remain > N_RELOC(ULONG_MAX)))
 		return -EINVAL;
 
@@ -1425,13 +1514,13 @@ static int eb_relocate_vma(struct i915_execbuffer *eb, struct eb_vma *ev)
 	 * to read. However, if the array is not writable the user loses
 	 * the updated relocation values.
 	 */
-	if (unlikely(!access_ok(urelocs, remain*sizeof(*urelocs))))
+	if (unlikely(!access_ok(urelocs, remain * sizeof(*urelocs))))
 		return -EFAULT;
 
 	do {
 		struct drm_i915_gem_relocation_entry *r = stack;
 		unsigned int count =
-			min_t(unsigned int, remain, ARRAY_SIZE(stack));
+			min_t(unsigned long, remain, ARRAY_SIZE(stack));
 		unsigned int copied;
 
 		/*
@@ -1494,9 +1583,7 @@ static int eb_relocate(struct i915_execbuffer *eb)
 {
 	int err;
 
-	mutex_lock(&eb->gem_context->mutex);
 	err = eb_lookup_vmas(eb);
-	mutex_unlock(&eb->gem_context->mutex);
 	if (err)
 		return err;
 
@@ -1597,19 +1684,15 @@ static int eb_move_to_gpu(struct i915_execbuffer *eb)
 			err = i915_vma_move_to_active(vma, eb->request, flags);
 
 		i915_vma_unlock(vma);
-
-		__eb_unreserve_vma(vma, flags);
-		i915_vma_put(vma);
-
-		ev->vma = NULL;
+		eb_unreserve_vma(ev);
 	}
 	ww_acquire_fini(&acquire);
 
+	eb_vma_array_put(fetch_and_zero(&eb->array));
+
 	if (unlikely(err))
 		goto err_skip;
 
-	eb->exec = NULL;
-
 	/* Unconditionally flush any chipset caches (for streaming writes). */
 	intel_gt_chipset_flush(eb->engine->gt);
 	return 0;
@@ -1784,7 +1867,7 @@ static int eb_parse_pipeline(struct i915_execbuffer *eb,
 	dma_resv_add_excl_fence(shadow->resv, &pw->base.dma);
 	dma_resv_unlock(shadow->resv);
 
-	dma_fence_work_commit(&pw->base);
+	dma_fence_work_commit_imm(&pw->base);
 	return 0;
 
 err_batch_unlock:
@@ -1861,6 +1944,7 @@ static int eb_parse(struct i915_execbuffer *eb)
 	eb->vma[eb->buffer_count].vma = i915_vma_get(shadow);
 	eb->vma[eb->buffer_count].flags = __EXEC_OBJECT_HAS_PIN;
 	eb->batch = &eb->vma[eb->buffer_count++];
+	eb->vma[eb->buffer_count].vma = NULL;
 
 	eb->trampoline = trampoline;
 	eb->batch_start_offset = 0;
@@ -2348,9 +2432,7 @@ static void eb_request_add(struct i915_execbuffer *eb)
 		__i915_request_skip(rq);
 	}
 
-	local_bh_disable();
 	__i915_request_queue(rq, &attr);
-	local_bh_enable(); /* Kick the execlists tasklet if just scheduled */
 
 	/* Try to clean up the client's timeline after submitting the request */
 	if (prev)
@@ -2386,8 +2468,6 @@ i915_gem_do_execbuffer(struct drm_device *dev,
 		args->flags |= __EXEC_HAS_RELOC;
 
 	eb.exec = exec;
-	eb.vma = (struct eb_vma *)(exec + args->buffer_count + 1);
-	eb.vma[0].vma = NULL;
 
 	eb.invalid_flags = __EXEC_OBJECT_UNKNOWN_FLAGS;
 	reloc_cache_init(&eb.reloc_cache, eb.i915);
@@ -2594,8 +2674,6 @@ i915_gem_do_execbuffer(struct drm_device *dev,
 	if (batch->private)
 		intel_engine_pool_put(batch->private);
 err_vma:
-	if (eb.exec)
-		eb_release_vmas(&eb);
 	if (eb.trampoline)
 		i915_vma_unpin(eb.trampoline);
 	eb_unpin_engine(&eb);
@@ -2615,7 +2693,7 @@ i915_gem_do_execbuffer(struct drm_device *dev,
 
 static size_t eb_element_size(void)
 {
-	return sizeof(struct drm_i915_gem_exec_object2) + sizeof(struct eb_vma);
+	return sizeof(struct drm_i915_gem_exec_object2);
 }
 
 static bool check_buffer_count(size_t count)
@@ -2671,7 +2749,7 @@ i915_gem_execbuffer_ioctl(struct drm_device *dev, void *data,
 	/* Copy in the exec list from userland */
 	exec_list = kvmalloc_array(count, sizeof(*exec_list),
 				   __GFP_NOWARN | GFP_KERNEL);
-	exec2_list = kvmalloc_array(count + 1, eb_element_size(),
+	exec2_list = kvmalloc_array(count, eb_element_size(),
 				    __GFP_NOWARN | GFP_KERNEL);
 	if (exec_list == NULL || exec2_list == NULL) {
 		drm_dbg(&i915->drm,
@@ -2749,8 +2827,7 @@ i915_gem_execbuffer2_ioctl(struct drm_device *dev, void *data,
 	if (err)
 		return err;
 
-	/* Allocate an extra slot for use by the command parser */
-	exec2_list = kvmalloc_array(count + 1, eb_element_size(),
+	exec2_list = kvmalloc_array(count, eb_element_size(),
 				    __GFP_NOWARN | GFP_KERNEL);
 	if (exec2_list == NULL) {
 		drm_dbg(&i915->drm, "Failed to allocate exec list for %zd buffers\n",
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_object.c b/drivers/gpu/drm/i915/gem/i915_gem_object.c
index 5da9f9e534b9..9d1d0131f7c2 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_object.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_object.c
@@ -135,9 +135,7 @@ void i915_gem_close_object(struct drm_gem_object *gem, struct drm_file *file)
 		if (vma) {
 			GEM_BUG_ON(vma->obj != obj);
 			GEM_BUG_ON(!atomic_read(&vma->open_count));
-			if (atomic_dec_and_test(&vma->open_count) &&
-			    !i915_vma_is_ggtt(vma))
-				i915_vma_close(vma);
+			i915_vma_close(vma);
 		}
 		mutex_unlock(&ctx->mutex);
 
@@ -206,7 +204,6 @@ static void __i915_gem_free_objects(struct drm_i915_private *i915,
 		}
 		obj->mmo.offsets = RB_ROOT;
 
-		GEM_BUG_ON(atomic_read(&obj->bind_count));
 		GEM_BUG_ON(obj->userfault_count);
 		GEM_BUG_ON(!list_empty(&obj->lut_list));
 
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_object_types.h b/drivers/gpu/drm/i915/gem/i915_gem_object_types.h
index a0b10bcd8d8a..54ee658bb168 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_object_types.h
+++ b/drivers/gpu/drm/i915/gem/i915_gem_object_types.h
@@ -179,9 +179,6 @@ struct drm_i915_gem_object {
 #define TILING_MASK (FENCE_MINIMUM_STRIDE - 1)
 #define STRIDE_MASK (~TILING_MASK)
 
-	/** Count of VMA actually bound by this object */
-	atomic_t bind_count;
-
 	struct {
 		/*
 		 * Protects the pages and their use. Do not use directly, but
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_pages.c b/drivers/gpu/drm/i915/gem/i915_gem_pages.c
index 24f4cadea114..5d855fcd5c0f 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_pages.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_pages.c
@@ -199,8 +199,6 @@ int __i915_gem_object_put_pages(struct drm_i915_gem_object *obj)
 	if (i915_gem_object_has_pinned_pages(obj))
 		return -EBUSY;
 
-	GEM_BUG_ON(atomic_read(&obj->bind_count));
-
 	/* May be called by shrinker from within get_pages() (on another bo) */
 	mutex_lock(&obj->mm.lock);
 	if (unlikely(atomic_read(&obj->mm.pages_pin_count))) {
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_phys.c b/drivers/gpu/drm/i915/gem/i915_gem_phys.c
index 698e22420dc5..7fe9831aa9ba 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_phys.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_phys.c
@@ -10,8 +10,6 @@
 
 #include <drm/drm.h> /* for drm_legacy.h! */
 #include <drm/drm_cache.h>
-#include <drm/drm_legacy.h> /* for drm_pci.h! */
-#include <drm/drm_pci.h>
 
 #include "gt/intel_gt.h"
 #include "i915_drv.h"
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c b/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c
index 03e5eb4c99d1..5b65ce738b16 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c
@@ -26,18 +26,6 @@ static bool can_release_pages(struct drm_i915_gem_object *obj)
 	if (!i915_gem_object_is_shrinkable(obj))
 		return false;
 
-	/*
-	 * Only report true if by unbinding the object and putting its pages
-	 * we can actually make forward progress towards freeing physical
-	 * pages.
-	 *
-	 * If the pages are pinned for any other reason than being bound
-	 * to the GPU, simply unbinding from the GPU is not going to succeed
-	 * in releasing our pin count on the pages themselves.
-	 */
-	if (atomic_read(&obj->mm.pages_pin_count) > atomic_read(&obj->bind_count))
-		return false;
-
 	/*
 	 * We can only return physical pages to the system if we can either
 	 * discard the contents (because the user has marked them as being
@@ -54,6 +42,8 @@ static bool unsafe_drop_pages(struct drm_i915_gem_object *obj,
 	flags = 0;
 	if (shrink & I915_SHRINK_ACTIVE)
 		flags = I915_GEM_OBJECT_UNBIND_ACTIVE;
+	if (!(shrink & I915_SHRINK_BOUND))
+		flags = I915_GEM_OBJECT_UNBIND_TEST;
 
 	if (i915_gem_object_unbind(obj, flags) == 0)
 		__i915_gem_object_put_pages(obj);
@@ -194,10 +184,6 @@ i915_gem_shrink(struct drm_i915_private *i915,
 			    i915_gem_object_is_framebuffer(obj))
 				continue;
 
-			if (!(shrink & I915_SHRINK_BOUND) &&
-			    atomic_read(&obj->bind_count))
-				continue;
-
 			if (!can_release_pages(obj))
 				continue;
 
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_stolen.c b/drivers/gpu/drm/i915/gem/i915_gem_stolen.c
index 5557dfa83a7b..dc250278bd2c 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_stolen.c
@@ -381,14 +381,14 @@ static int i915_gem_init_stolen(struct drm_i915_private *i915)
 	mutex_init(&i915->mm.stolen_lock);
 
 	if (intel_vgpu_active(i915)) {
-		dev_notice(i915->drm.dev,
+		drm_notice(&i915->drm,
 			   "%s, disabling use of stolen memory\n",
 			   "iGVT-g active");
 		return 0;
 	}
 
 	if (intel_vtd_active() && INTEL_GEN(i915) < 8) {
-		dev_notice(i915->drm.dev,
+		drm_notice(&i915->drm,
 			   "%s, disabling use of stolen memory\n",
 			   "DMAR active");
 		return 0;
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_tiling.c b/drivers/gpu/drm/i915/gem/i915_gem_tiling.c
index 37f77aee1212..0158e49bf9bb 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_tiling.c
@@ -182,21 +182,35 @@ i915_gem_object_fence_prepare(struct drm_i915_gem_object *obj,
 			      int tiling_mode, unsigned int stride)
 {
 	struct i915_ggtt *ggtt = &to_i915(obj->base.dev)->ggtt;
-	struct i915_vma *vma;
+	struct i915_vma *vma, *vn;
+	LIST_HEAD(unbind);
 	int ret = 0;
 
 	if (tiling_mode == I915_TILING_NONE)
 		return 0;
 
 	mutex_lock(&ggtt->vm.mutex);
+
+	spin_lock(&obj->vma.lock);
 	for_each_ggtt_vma(vma, obj) {
+		GEM_BUG_ON(vma->vm != &ggtt->vm);
+
 		if (i915_vma_fence_prepare(vma, tiling_mode, stride))
 			continue;
 
+		list_move(&vma->vm_link, &unbind);
+	}
+	spin_unlock(&obj->vma.lock);
+
+	list_for_each_entry_safe(vma, vn, &unbind, vm_link) {
 		ret = __i915_vma_unbind(vma);
-		if (ret)
+		if (ret) {
+			/* Restore the remaining vma on an error */
+			list_splice(&unbind, &ggtt->vm.bound_list);
 			break;
+		}
 	}
+
 	mutex_unlock(&ggtt->vm.mutex);
 
 	return ret;
@@ -268,6 +282,7 @@ i915_gem_object_set_tiling(struct drm_i915_gem_object *obj,
 	}
 	mutex_unlock(&obj->mm.lock);
 
+	spin_lock(&obj->vma.lock);
 	for_each_ggtt_vma(vma, obj) {
 		vma->fence_size =
 			i915_gem_fence_size(i915, vma->size, tiling, stride);
@@ -278,6 +293,7 @@ i915_gem_object_set_tiling(struct drm_i915_gem_object *obj,
 		if (vma->fence)
 			vma->fence->dirty = true;
 	}
+	spin_unlock(&obj->vma.lock);
 
 	obj->tiling_and_stride = tiling | stride;
 	i915_gem_object_unlock(obj);
diff --git a/drivers/gpu/drm/i915/gem/selftests/huge_gem_object.c b/drivers/gpu/drm/i915/gem/selftests/huge_gem_object.c
index fa16f2c3f3ac..2b46c6530da9 100644
--- a/drivers/gpu/drm/i915/gem/selftests/huge_gem_object.c
+++ b/drivers/gpu/drm/i915/gem/selftests/huge_gem_object.c
@@ -88,8 +88,7 @@ static void huge_put_pages(struct drm_i915_gem_object *obj,
 }
 
 static const struct drm_i915_gem_object_ops huge_ops = {
-	.flags = I915_GEM_OBJECT_HAS_STRUCT_PAGE |
-		 I915_GEM_OBJECT_IS_SHRINKABLE,
+	.flags = I915_GEM_OBJECT_HAS_STRUCT_PAGE,
 	.get_pages = huge_get_pages,
 	.put_pages = huge_put_pages,
 };
diff --git a/drivers/gpu/drm/i915/gem/selftests/huge_pages.c b/drivers/gpu/drm/i915/gem/selftests/huge_pages.c
index 2d0fd50c5312..c9988b6d5c88 100644
--- a/drivers/gpu/drm/i915/gem/selftests/huge_pages.c
+++ b/drivers/gpu/drm/i915/gem/selftests/huge_pages.c
@@ -421,7 +421,7 @@ static int igt_mock_exhaust_device_supported_pages(void *arg)
 
 			err = i915_vma_pin(vma, 0, 0, PIN_USER);
 			if (err)
-				goto out_close;
+				goto out_put;
 
 			err = igt_check_page_sizes(vma);
 
@@ -432,8 +432,6 @@ static int igt_mock_exhaust_device_supported_pages(void *arg)
 			}
 
 			i915_vma_unpin(vma);
-			i915_vma_close(vma);
-
 			i915_gem_object_put(obj);
 
 			if (err)
@@ -443,8 +441,6 @@ static int igt_mock_exhaust_device_supported_pages(void *arg)
 
 	goto out_device;
 
-out_close:
-	i915_vma_close(vma);
 out_put:
 	i915_gem_object_put(obj);
 out_device:
@@ -492,7 +488,7 @@ static int igt_mock_memory_region_huge_pages(void *arg)
 
 			err = i915_vma_pin(vma, 0, 0, PIN_USER);
 			if (err)
-				goto out_close;
+				goto out_put;
 
 			err = igt_check_page_sizes(vma);
 			if (err)
@@ -515,8 +511,6 @@ static int igt_mock_memory_region_huge_pages(void *arg)
 			}
 
 			i915_vma_unpin(vma);
-			i915_vma_close(vma);
-
 			__i915_gem_object_put_pages(obj);
 			i915_gem_object_put(obj);
 		}
@@ -526,8 +520,6 @@ static int igt_mock_memory_region_huge_pages(void *arg)
 
 out_unpin:
 	i915_vma_unpin(vma);
-out_close:
-	i915_vma_close(vma);
 out_put:
 	i915_gem_object_put(obj);
 out_region:
@@ -587,10 +579,8 @@ static int igt_mock_ppgtt_misaligned_dma(void *arg)
 		}
 
 		err = i915_vma_pin(vma, 0, 0, flags);
-		if (err) {
-			i915_vma_close(vma);
+		if (err)
 			goto out_unpin;
-		}
 
 
 		err = igt_check_page_sizes(vma);
@@ -603,10 +593,8 @@ static int igt_mock_ppgtt_misaligned_dma(void *arg)
 
 		i915_vma_unpin(vma);
 
-		if (err) {
-			i915_vma_close(vma);
+		if (err)
 			goto out_unpin;
-		}
 
 		/*
 		 * Try all the other valid offsets until the next
@@ -615,16 +603,12 @@ static int igt_mock_ppgtt_misaligned_dma(void *arg)
 		 */
 		for (offset = 4096; offset < page_size; offset += 4096) {
 			err = i915_vma_unbind(vma);
-			if (err) {
-				i915_vma_close(vma);
+			if (err)
 				goto out_unpin;
-			}
 
 			err = i915_vma_pin(vma, 0, 0, flags | offset);
-			if (err) {
-				i915_vma_close(vma);
+			if (err)
 				goto out_unpin;
-			}
 
 			err = igt_check_page_sizes(vma);
 
@@ -636,10 +620,8 @@ static int igt_mock_ppgtt_misaligned_dma(void *arg)
 
 			i915_vma_unpin(vma);
 
-			if (err) {
-				i915_vma_close(vma);
+			if (err)
 				goto out_unpin;
-			}
 
 			if (igt_timeout(end_time,
 					"%s timed out at offset %x with page-size %x\n",
@@ -647,8 +629,6 @@ static int igt_mock_ppgtt_misaligned_dma(void *arg)
 				break;
 		}
 
-		i915_vma_close(vma);
-
 		i915_gem_object_unpin_pages(obj);
 		__i915_gem_object_put_pages(obj);
 		i915_gem_object_put(obj);
@@ -670,12 +650,6 @@ static void close_object_list(struct list_head *objects,
 	struct drm_i915_gem_object *obj, *on;
 
 	list_for_each_entry_safe(obj, on, objects, st_link) {
-		struct i915_vma *vma;
-
-		vma = i915_vma_instance(obj, &ppgtt->vm, NULL);
-		if (!IS_ERR(vma))
-			i915_vma_close(vma);
-
 		list_del(&obj->st_link);
 		i915_gem_object_unpin_pages(obj);
 		__i915_gem_object_put_pages(obj);
@@ -912,7 +886,7 @@ static int igt_mock_ppgtt_64K(void *arg)
 
 			err = i915_vma_pin(vma, 0, 0, flags);
 			if (err)
-				goto out_vma_close;
+				goto out_object_unpin;
 
 			err = igt_check_page_sizes(vma);
 			if (err)
@@ -945,8 +919,6 @@ static int igt_mock_ppgtt_64K(void *arg)
 			}
 
 			i915_vma_unpin(vma);
-			i915_vma_close(vma);
-
 			i915_gem_object_unpin_pages(obj);
 			__i915_gem_object_put_pages(obj);
 			i915_gem_object_put(obj);
@@ -957,8 +929,6 @@ static int igt_mock_ppgtt_64K(void *arg)
 
 out_vma_unpin:
 	i915_vma_unpin(vma);
-out_vma_close:
-	i915_vma_close(vma);
 out_object_unpin:
 	i915_gem_object_unpin_pages(obj);
 out_object_put:
@@ -1070,7 +1040,7 @@ static int __igt_write_huge(struct intel_context *ce,
 
 	err = i915_vma_unbind(vma);
 	if (err)
-		goto out_vma_close;
+		return err;
 
 	err = i915_vma_pin(vma, size, 0, flags | offset);
 	if (err) {
@@ -1081,7 +1051,7 @@ static int __igt_write_huge(struct intel_context *ce,
 		if (err == -ENOSPC && i915_is_ggtt(ce->vm))
 			err = 0;
 
-		goto out_vma_close;
+		return err;
 	}
 
 	err = igt_check_page_sizes(vma);
@@ -1102,8 +1072,6 @@ static int __igt_write_huge(struct intel_context *ce,
 
 out_vma_unpin:
 	i915_vma_unpin(vma);
-out_vma_close:
-	__i915_vma_put(vma);
 	return err;
 }
 
@@ -1477,8 +1445,10 @@ static int igt_ppgtt_pin_update(void *arg)
 		unsigned int page_size = BIT(first);
 
 		obj = i915_gem_object_create_internal(dev_priv, page_size);
-		if (IS_ERR(obj))
-			return PTR_ERR(obj);
+		if (IS_ERR(obj)) {
+			err = PTR_ERR(obj);
+			goto out_vm;
+		}
 
 		vma = i915_vma_instance(obj, vm, NULL);
 		if (IS_ERR(vma)) {
@@ -1488,7 +1458,7 @@ static int igt_ppgtt_pin_update(void *arg)
 
 		err = i915_vma_pin(vma, SZ_2M, 0, flags);
 		if (err)
-			goto out_close;
+			goto out_put;
 
 		if (vma->page_sizes.sg < page_size) {
 			pr_info("Unable to allocate page-size %x, finishing test early\n",
@@ -1525,14 +1495,14 @@ static int igt_ppgtt_pin_update(void *arg)
 			goto out_unpin;
 
 		i915_vma_unpin(vma);
-		i915_vma_close(vma);
-
 		i915_gem_object_put(obj);
 	}
 
 	obj = i915_gem_object_create_internal(dev_priv, PAGE_SIZE);
-	if (IS_ERR(obj))
-		return PTR_ERR(obj);
+	if (IS_ERR(obj)) {
+		err = PTR_ERR(obj);
+		goto out_vm;
+	}
 
 	vma = i915_vma_instance(obj, vm, NULL);
 	if (IS_ERR(vma)) {
@@ -1542,7 +1512,7 @@ static int igt_ppgtt_pin_update(void *arg)
 
 	err = i915_vma_pin(vma, 0, 0, flags);
 	if (err)
-		goto out_close;
+		goto out_put;
 
 	/*
 	 * Make sure we don't end up with something like where the pde is still
@@ -1572,8 +1542,6 @@ static int igt_ppgtt_pin_update(void *arg)
 
 out_unpin:
 	i915_vma_unpin(vma);
-out_close:
-	i915_vma_close(vma);
 out_put:
 	i915_gem_object_put(obj);
 out_vm:
@@ -1625,13 +1593,11 @@ static int igt_tmpfs_fallback(void *arg)
 
 	err = i915_vma_pin(vma, 0, 0, PIN_USER);
 	if (err)
-		goto out_close;
+		goto out_put;
 
 	err = igt_check_page_sizes(vma);
 
 	i915_vma_unpin(vma);
-out_close:
-	i915_vma_close(vma);
 out_put:
 	i915_gem_object_put(obj);
 out_restore:
@@ -1678,7 +1644,7 @@ static int igt_shrink_thp(void *arg)
 
 	err = i915_vma_pin(vma, 0, 0, flags);
 	if (err)
-		goto out_close;
+		goto out_put;
 
 	if (obj->mm.page_sizes.phys < I915_GTT_PAGE_SIZE_2M) {
 		pr_info("failed to allocate THP, finishing test early\n");
@@ -1702,7 +1668,7 @@ static int igt_shrink_thp(void *arg)
 	i915_gem_context_unlock_engines(ctx);
 	i915_vma_unpin(vma);
 	if (err)
-		goto out_close;
+		goto out_put;
 
 	/*
 	 * Now that the pages are *unpinned* shrink-all should invoke
@@ -1712,18 +1678,18 @@ static int igt_shrink_thp(void *arg)
 	if (i915_gem_object_has_pages(obj)) {
 		pr_err("shrink-all didn't truncate the pages\n");
 		err = -EINVAL;
-		goto out_close;
+		goto out_put;
 	}
 
 	if (obj->mm.page_sizes.sg || obj->mm.page_sizes.phys) {
 		pr_err("residual page-size bits left\n");
 		err = -EINVAL;
-		goto out_close;
+		goto out_put;
 	}
 
 	err = i915_vma_pin(vma, 0, 0, flags);
 	if (err)
-		goto out_close;
+		goto out_put;
 
 	while (n--) {
 		err = cpu_check(obj, n, 0xdeadbeaf);
@@ -1733,8 +1699,6 @@ static int igt_shrink_thp(void *arg)
 
 out_unpin:
 	i915_vma_unpin(vma);
-out_close:
-	i915_vma_close(vma);
 out_put:
 	i915_gem_object_put(obj);
 out_vm:
@@ -1773,21 +1737,20 @@ int i915_gem_huge_page_mock_selftests(void)
 	if (!i915_vm_is_4lvl(&ppgtt->vm)) {
 		pr_err("failed to create 48b PPGTT\n");
 		err = -EINVAL;
-		goto out_close;
+		goto out_put;
 	}
 
 	/* If we were ever hit this then it's time to mock the 64K scratch */
 	if (!i915_vm_has_scratch_64K(&ppgtt->vm)) {
 		pr_err("PPGTT missing 64K scratch page\n");
 		err = -EINVAL;
-		goto out_close;
+		goto out_put;
 	}
 
 	err = i915_subtests(tests, ppgtt);
 
-out_close:
+out_put:
 	i915_vm_put(&ppgtt->vm);
-
 out_unlock:
 	drm_dev_put(&dev_priv->drm);
 	return err;
diff --git a/drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c b/drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c
index 54b86cf7f5d2..87d264fe54b2 100644
--- a/drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c
@@ -1687,7 +1687,6 @@ static int read_from_scratch(struct i915_gem_context *ctx,
 		goto skip_request;
 
 	i915_vma_unpin(vma);
-	i915_vma_close(vma);
 
 	i915_request_add(rq);
 
@@ -1925,7 +1924,7 @@ static int mock_context_barrier(void *arg)
 		goto out;
 	}
 
-	rq = igt_request_alloc(ctx, i915->engine[RCS0]);
+	rq = igt_request_alloc(ctx, i915->gt.engine[RCS0]);
 	if (IS_ERR(rq)) {
 		pr_err("Request allocation failed!\n");
 		goto out;
diff --git a/drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c b/drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c
index 43912e9b683d..ef7abcb3f4ee 100644
--- a/drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c
+++ b/drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c
@@ -1156,9 +1156,6 @@ static int __igt_mmap_revoke(struct drm_i915_private *i915,
 	if (err)
 		goto out_unmap;
 
-	GEM_BUG_ON(mmo->mmap_type == I915_MMAP_TYPE_GTT &&
-		   !atomic_read(&obj->bind_count));
-
 	err = check_present(addr, obj->base.size);
 	if (err) {
 		pr_err("%s: was not present\n", obj->mm.region->name);
@@ -1175,7 +1172,6 @@ static int __igt_mmap_revoke(struct drm_i915_private *i915,
 		pr_err("Failed to unbind object!\n");
 		goto out_unmap;
 	}
-	GEM_BUG_ON(atomic_read(&obj->bind_count));
 
 	if (type != I915_MMAP_TYPE_GTT) {
 		__i915_gem_object_put_pages(obj);
diff --git a/drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c b/drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c
index 2b6db6f799de..faa5b6d91795 100644
--- a/drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c
+++ b/drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c
@@ -14,7 +14,7 @@ static int igt_gem_object(void *arg)
 {
 	struct drm_i915_private *i915 = arg;
 	struct drm_i915_gem_object *obj;
-	int err = -ENOMEM;
+	int err;
 
 	/* Basic test to ensure we can create an object */
 
diff --git a/drivers/gpu/drm/i915/gem/selftests/mock_dmabuf.c b/drivers/gpu/drm/i915/gem/selftests/mock_dmabuf.c
index 9272bef57092..debaf7b18ab5 100644
--- a/drivers/gpu/drm/i915/gem/selftests/mock_dmabuf.c
+++ b/drivers/gpu/drm/i915/gem/selftests/mock_dmabuf.c
@@ -66,7 +66,7 @@ static void *mock_dmabuf_vmap(struct dma_buf *dma_buf)
 {
 	struct mock_dmabuf *mock = to_mock(dma_buf);
 
-	return vm_map_ram(mock->pages, mock->npages, 0, PAGE_KERNEL);
+	return vm_map_ram(mock->pages, mock->npages, 0);
 }
 
 static void mock_dmabuf_vunmap(struct dma_buf *dma_buf, void *vaddr)
diff --git a/drivers/gpu/drm/i915/gt/debugfs_engines.c b/drivers/gpu/drm/i915/gt/debugfs_engines.c
index 6a5e9ab20b94..5e3725e62241 100644
--- a/drivers/gpu/drm/i915/gt/debugfs_engines.c
+++ b/drivers/gpu/drm/i915/gt/debugfs_engines.c
@@ -32,5 +32,5 @@ void debugfs_engines_register(struct intel_gt *gt, struct dentry *root)
 		{ "engines", &engines_fops },
 	};
 
-	debugfs_gt_register_files(gt, root, files, ARRAY_SIZE(files));
+	intel_gt_debugfs_register_files(root, files, ARRAY_SIZE(files), gt);
 }
diff --git a/drivers/gpu/drm/i915/gt/debugfs_gt.c b/drivers/gpu/drm/i915/gt/debugfs_gt.c
index 75255aaacaed..1de5fbaa1cf9 100644
--- a/drivers/gpu/drm/i915/gt/debugfs_gt.c
+++ b/drivers/gpu/drm/i915/gt/debugfs_gt.c
@@ -9,6 +9,7 @@
 #include "debugfs_engines.h"
 #include "debugfs_gt.h"
 #include "debugfs_gt_pm.h"
+#include "uc/intel_uc_debugfs.h"
 #include "i915_drv.h"
 
 void debugfs_gt_register(struct intel_gt *gt)
@@ -24,17 +25,19 @@ void debugfs_gt_register(struct intel_gt *gt)
 
 	debugfs_engines_register(gt, root);
 	debugfs_gt_pm_register(gt, root);
+
+	intel_uc_debugfs_register(&gt->uc, root);
 }
 
-void debugfs_gt_register_files(struct intel_gt *gt,
-			       struct dentry *root,
-			       const struct debugfs_gt_file *files,
-			       unsigned long count)
+void intel_gt_debugfs_register_files(struct dentry *root,
+				     const struct debugfs_gt_file *files,
+				     unsigned long count, void *data)
 {
 	while (count--) {
-		if (!files->eval || files->eval(gt))
+		umode_t mode = files->fops->write ? 0644 : 0444;
+		if (!files->eval || files->eval(data))
 			debugfs_create_file(files->name,
-					    0444, root, gt,
+					    mode, root, data,
 					    files->fops);
 
 		files++;
diff --git a/drivers/gpu/drm/i915/gt/debugfs_gt.h b/drivers/gpu/drm/i915/gt/debugfs_gt.h
index 4ea0f06cda8f..f77540f727e9 100644
--- a/drivers/gpu/drm/i915/gt/debugfs_gt.h
+++ b/drivers/gpu/drm/i915/gt/debugfs_gt.h
@@ -28,12 +28,11 @@ void debugfs_gt_register(struct intel_gt *gt);
 struct debugfs_gt_file {
 	const char *name;
 	const struct file_operations *fops;
-	bool (*eval)(const struct intel_gt *gt);
+	bool (*eval)(void *data);
 };
 
-void debugfs_gt_register_files(struct intel_gt *gt,
-			       struct dentry *root,
-			       const struct debugfs_gt_file *files,
-			       unsigned long count);
+void intel_gt_debugfs_register_files(struct dentry *root,
+				     const struct debugfs_gt_file *files,
+				     unsigned long count, void *data);
 
 #endif /* DEBUGFS_GT_H */
diff --git a/drivers/gpu/drm/i915/gt/debugfs_gt_pm.c b/drivers/gpu/drm/i915/gt/debugfs_gt_pm.c
index 059c9e5c002e..174a24553322 100644
--- a/drivers/gpu/drm/i915/gt/debugfs_gt_pm.c
+++ b/drivers/gpu/drm/i915/gt/debugfs_gt_pm.c
@@ -10,6 +10,7 @@
 #include "debugfs_gt_pm.h"
 #include "i915_drv.h"
 #include "intel_gt.h"
+#include "intel_gt_clock_utils.h"
 #include "intel_llc.h"
 #include "intel_rc6.h"
 #include "intel_rps.h"
@@ -268,7 +269,7 @@ static int frequency_show(struct seq_file *m, void *unused)
 			   yesno(rpmodectl & GEN6_RP_ENABLE));
 		seq_printf(m, "SW control enabled: %s\n",
 			   yesno((rpmodectl & GEN6_RP_MEDIA_MODE_MASK) ==
-				  GEN6_RP_MEDIA_SW_MODE));
+				 GEN6_RP_MEDIA_SW_MODE));
 
 		vlv_punit_get(i915);
 		freq_sts = vlv_punit_read(i915, PUNIT_REG_GPU_FREQ_STS);
@@ -300,8 +301,9 @@ static int frequency_show(struct seq_file *m, void *unused)
 		u32 rp_state_cap;
 		u32 rpmodectl, rpinclimit, rpdeclimit;
 		u32 rpstat, cagf, reqf;
-		u32 rpupei, rpcurup, rpprevup;
-		u32 rpdownei, rpcurdown, rpprevdown;
+		u32 rpcurupei, rpcurup, rpprevup;
+		u32 rpcurdownei, rpcurdown, rpprevdown;
+		u32 rpupei, rpupt, rpdownei, rpdownt;
 		u32 pm_ier, pm_imr, pm_isr, pm_iir, pm_mask;
 		int max_freq;
 
@@ -334,12 +336,19 @@ static int frequency_show(struct seq_file *m, void *unused)
 		rpdeclimit = intel_uncore_read(uncore, GEN6_RP_DOWN_THRESHOLD);
 
 		rpstat = intel_uncore_read(uncore, GEN6_RPSTAT1);
-		rpupei = intel_uncore_read(uncore, GEN6_RP_CUR_UP_EI) & GEN6_CURICONT_MASK;
+		rpcurupei = intel_uncore_read(uncore, GEN6_RP_CUR_UP_EI) & GEN6_CURICONT_MASK;
 		rpcurup = intel_uncore_read(uncore, GEN6_RP_CUR_UP) & GEN6_CURBSYTAVG_MASK;
 		rpprevup = intel_uncore_read(uncore, GEN6_RP_PREV_UP) & GEN6_CURBSYTAVG_MASK;
-		rpdownei = intel_uncore_read(uncore, GEN6_RP_CUR_DOWN_EI) & GEN6_CURIAVG_MASK;
+		rpcurdownei = intel_uncore_read(uncore, GEN6_RP_CUR_DOWN_EI) & GEN6_CURIAVG_MASK;
 		rpcurdown = intel_uncore_read(uncore, GEN6_RP_CUR_DOWN) & GEN6_CURBSYTAVG_MASK;
 		rpprevdown = intel_uncore_read(uncore, GEN6_RP_PREV_DOWN) & GEN6_CURBSYTAVG_MASK;
+
+		rpupei = intel_uncore_read(uncore, GEN6_RP_UP_EI);
+		rpupt = intel_uncore_read(uncore, GEN6_RP_UP_THRESHOLD);
+
+		rpdownei = intel_uncore_read(uncore, GEN6_RP_DOWN_EI);
+		rpdownt = intel_uncore_read(uncore, GEN6_RP_DOWN_THRESHOLD);
+
 		cagf = intel_rps_read_actual_frequency(rps);
 
 		intel_uncore_forcewake_put(uncore, FORCEWAKE_ALL);
@@ -372,7 +381,7 @@ static int frequency_show(struct seq_file *m, void *unused)
 			   yesno(rpmodectl & GEN6_RP_ENABLE));
 		seq_printf(m, "SW control enabled: %s\n",
 			   yesno((rpmodectl & GEN6_RP_MEDIA_MODE_MASK) ==
-				  GEN6_RP_MEDIA_SW_MODE));
+				 GEN6_RP_MEDIA_SW_MODE));
 
 		seq_printf(m, "PM IER=0x%08x IMR=0x%08x, MASK=0x%08x\n",
 			   pm_ier, pm_imr, pm_mask);
@@ -394,23 +403,35 @@ static int frequency_show(struct seq_file *m, void *unused)
 		seq_printf(m, "RPDECLIMIT: 0x%08x\n", rpdeclimit);
 		seq_printf(m, "RPNSWREQ: %dMHz\n", reqf);
 		seq_printf(m, "CAGF: %dMHz\n", cagf);
-		seq_printf(m, "RP CUR UP EI: %d (%dus)\n",
-			   rpupei, GT_PM_INTERVAL_TO_US(i915, rpupei));
-		seq_printf(m, "RP CUR UP: %d (%dus)\n",
-			   rpcurup, GT_PM_INTERVAL_TO_US(i915, rpcurup));
-		seq_printf(m, "RP PREV UP: %d (%dus)\n",
-			   rpprevup, GT_PM_INTERVAL_TO_US(i915, rpprevup));
+		seq_printf(m, "RP CUR UP EI: %d (%dns)\n",
+			   rpcurupei,
+			   intel_gt_pm_interval_to_ns(gt, rpcurupei));
+		seq_printf(m, "RP CUR UP: %d (%dns)\n",
+			   rpcurup, intel_gt_pm_interval_to_ns(gt, rpcurup));
+		seq_printf(m, "RP PREV UP: %d (%dns)\n",
+			   rpprevup, intel_gt_pm_interval_to_ns(gt, rpprevup));
 		seq_printf(m, "Up threshold: %d%%\n",
 			   rps->power.up_threshold);
-
-		seq_printf(m, "RP CUR DOWN EI: %d (%dus)\n",
-			   rpdownei, GT_PM_INTERVAL_TO_US(i915, rpdownei));
-		seq_printf(m, "RP CUR DOWN: %d (%dus)\n",
-			   rpcurdown, GT_PM_INTERVAL_TO_US(i915, rpcurdown));
-		seq_printf(m, "RP PREV DOWN: %d (%dus)\n",
-			   rpprevdown, GT_PM_INTERVAL_TO_US(i915, rpprevdown));
+		seq_printf(m, "RP UP EI: %d (%dns)\n",
+			   rpupei, intel_gt_pm_interval_to_ns(gt, rpupei));
+		seq_printf(m, "RP UP THRESHOLD: %d (%dns)\n",
+			   rpupt, intel_gt_pm_interval_to_ns(gt, rpupt));
+
+		seq_printf(m, "RP CUR DOWN EI: %d (%dns)\n",
+			   rpcurdownei,
+			   intel_gt_pm_interval_to_ns(gt, rpcurdownei));
+		seq_printf(m, "RP CUR DOWN: %d (%dns)\n",
+			   rpcurdown,
+			   intel_gt_pm_interval_to_ns(gt, rpcurdown));
+		seq_printf(m, "RP PREV DOWN: %d (%dns)\n",
+			   rpprevdown,
+			   intel_gt_pm_interval_to_ns(gt, rpprevdown));
 		seq_printf(m, "Down threshold: %d%%\n",
 			   rps->power.down_threshold);
+		seq_printf(m, "RP DOWN EI: %d (%dns)\n",
+			   rpdownei, intel_gt_pm_interval_to_ns(gt, rpdownei));
+		seq_printf(m, "RP DOWN THRESHOLD: %d (%dns)\n",
+			   rpdownt, intel_gt_pm_interval_to_ns(gt, rpdownt));
 
 		max_freq = (IS_GEN9_LP(i915) ? rp_state_cap >> 0 :
 			    rp_state_cap >> 16) & 0xff;
@@ -506,8 +527,10 @@ static int llc_show(struct seq_file *m, void *data)
 	return 0;
 }
 
-static bool llc_eval(const struct intel_gt *gt)
+static bool llc_eval(void *data)
 {
+	struct intel_gt *gt = data;
+
 	return HAS_LLC(gt->i915);
 }
 
@@ -533,7 +556,8 @@ static int rps_boost_show(struct seq_file *m, void *data)
 	struct drm_i915_private *i915 = gt->i915;
 	struct intel_rps *rps = &gt->rps;
 
-	seq_printf(m, "RPS enabled? %d\n", rps->enabled);
+	seq_printf(m, "RPS enabled? %s\n", yesno(intel_rps_is_enabled(rps)));
+	seq_printf(m, "RPS active? %s\n", yesno(intel_rps_is_active(rps)));
 	seq_printf(m, "GPU busy? %s\n", yesno(gt->awake));
 	seq_printf(m, "Boosts outstanding? %d\n",
 		   atomic_read(&rps->num_waiters));
@@ -553,7 +577,7 @@ static int rps_boost_show(struct seq_file *m, void *data)
 
 	seq_printf(m, "Wait boosts: %d\n", atomic_read(&rps->boosts));
 
-	if (INTEL_GEN(i915) >= 6 && rps->enabled && gt->awake) {
+	if (INTEL_GEN(i915) >= 6 && intel_rps_is_active(rps)) {
 		struct intel_uncore *uncore = gt->uncore;
 		u32 rpup, rpupei;
 		u32 rpdown, rpdownei;
@@ -580,8 +604,10 @@ static int rps_boost_show(struct seq_file *m, void *data)
 	return 0;
 }
 
-static bool rps_eval(const struct intel_gt *gt)
+static bool rps_eval(void *data)
 {
+	struct intel_gt *gt = data;
+
 	return HAS_RPS(gt->i915);
 }
 
@@ -597,5 +623,5 @@ void debugfs_gt_pm_register(struct intel_gt *gt, struct dentry *root)
 		{ "rps_boost", &rps_boost_fops, rps_eval },
 	};
 
-	debugfs_gt_register_files(gt, root, files, ARRAY_SIZE(files));
+	intel_gt_debugfs_register_files(root, files, ARRAY_SIZE(files), gt);
 }
diff --git a/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c b/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
index cbad7fe722ce..cbedba857d43 100644
--- a/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
+++ b/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
@@ -64,7 +64,7 @@ static void __intel_breadcrumbs_disarm_irq(struct intel_breadcrumbs *b)
 	if (!--b->irq_enabled)
 		irq_disable(engine);
 
-	b->irq_armed = false;
+	WRITE_ONCE(b->irq_armed, false);
 	intel_gt_pm_put_async(engine->gt);
 }
 
@@ -73,7 +73,7 @@ void intel_engine_disarm_breadcrumbs(struct intel_engine_cs *engine)
 	struct intel_breadcrumbs *b = &engine->breadcrumbs;
 	unsigned long flags;
 
-	if (!b->irq_armed)
+	if (!READ_ONCE(b->irq_armed))
 		return;
 
 	spin_lock_irqsave(&b->irq_lock, flags);
@@ -233,7 +233,7 @@ static bool __intel_breadcrumbs_arm_irq(struct intel_breadcrumbs *b)
 	 * which we can add a new waiter and avoid the cost of re-enabling
 	 * the irq.
 	 */
-	b->irq_armed = true;
+	WRITE_ONCE(b->irq_armed, true);
 
 	/*
 	 * Since we are waiting on a request, the GPU should be busy
diff --git a/drivers/gpu/drm/i915/gt/intel_context.c b/drivers/gpu/drm/i915/gt/intel_context.c
index aea992e46c42..74ddb49b2941 100644
--- a/drivers/gpu/drm/i915/gt/intel_context.c
+++ b/drivers/gpu/drm/i915/gt/intel_context.c
@@ -114,6 +114,11 @@ int __intel_context_do_pin(struct intel_context *ce)
 		goto out_release;
 	}
 
+	if (unlikely(intel_context_is_closed(ce))) {
+		err = -ENOENT;
+		goto out_unlock;
+	}
+
 	if (likely(!atomic_add_unless(&ce->pin_count, 1, 0))) {
 		err = intel_context_active_acquire(ce);
 		if (unlikely(err))
diff --git a/drivers/gpu/drm/i915/gt/intel_context_sseu.c b/drivers/gpu/drm/i915/gt/intel_context_sseu.c
index 57a30956c922..487299cb91f2 100644
--- a/drivers/gpu/drm/i915/gt/intel_context_sseu.c
+++ b/drivers/gpu/drm/i915/gt/intel_context_sseu.c
@@ -25,8 +25,7 @@ static int gen8_emit_rpcs_config(struct i915_request *rq,
 		return PTR_ERR(cs);
 
 	offset = i915_ggtt_offset(ce->state) +
-		 LRC_STATE_PN * PAGE_SIZE +
-		 CTX_R_PWR_CLK_STATE * 4;
+		 LRC_STATE_OFFSET + CTX_R_PWR_CLK_STATE * 4;
 
 	*cs++ = MI_STORE_DWORD_IMM_GEN4 | MI_USE_GGTT;
 	*cs++ = lower_32_bits(offset);
diff --git a/drivers/gpu/drm/i915/gt/intel_context_types.h b/drivers/gpu/drm/i915/gt/intel_context_types.h
index 07cb83a0d017..4954b0df4864 100644
--- a/drivers/gpu/drm/i915/gt/intel_context_types.h
+++ b/drivers/gpu/drm/i915/gt/intel_context_types.h
@@ -69,7 +69,13 @@ struct intel_context {
 #define CONTEXT_NOPREEMPT		7
 
 	u32 *lrc_reg_state;
-	u64 lrc_desc;
+	union {
+		struct {
+			u32 lrca;
+			u32 ccid;
+		};
+		u64 desc;
+	} lrc;
 	u32 tag; /* cookie passed to HW to track this context on submission */
 
 	/* Time on GPU as tracked by the hw. */
@@ -96,6 +102,8 @@ struct intel_context {
 
 	/** sseu: Control eu/slice partitioning */
 	struct intel_sseu sseu;
+
+	u8 wa_bb_page; /* if set, page num reserved for context workarounds */
 };
 
 #endif /* __INTEL_CONTEXT_TYPES__ */
diff --git a/drivers/gpu/drm/i915/gt/intel_engine.h b/drivers/gpu/drm/i915/gt/intel_engine.h
index b469de0dd9b6..d10e52ff059f 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine.h
+++ b/drivers/gpu/drm/i915/gt/intel_engine.h
@@ -199,6 +199,8 @@ void intel_engine_cleanup(struct intel_engine_cs *engine);
 int intel_engines_init_mmio(struct intel_gt *gt);
 int intel_engines_init(struct intel_gt *gt);
 
+void intel_engine_free_request_pool(struct intel_engine_cs *engine);
+
 void intel_engines_release(struct intel_gt *gt);
 void intel_engines_free(struct intel_gt *gt);
 
@@ -308,9 +310,6 @@ void intel_engine_dump(struct intel_engine_cs *engine,
 		       struct drm_printer *m,
 		       const char *header, ...);
 
-int intel_enable_engine_stats(struct intel_engine_cs *engine);
-void intel_disable_engine_stats(struct intel_engine_cs *engine);
-
 ktime_t intel_engine_get_busy_time(struct intel_engine_cs *engine);
 
 struct i915_request *
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_cs.c b/drivers/gpu/drm/i915/gt/intel_engine_cs.c
index 3aa8a652c16d..c9e46c5ced43 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/gt/intel_engine_cs.c
@@ -347,8 +347,6 @@ static int intel_engine_setup(struct intel_gt *gt, enum intel_engine_id id)
 	gt->engine_class[info->class][info->instance] = engine;
 	gt->engine[id] = engine;
 
-	i915->engine[id] = engine;
-
 	return 0;
 }
 
@@ -425,17 +423,27 @@ void intel_engines_release(struct intel_gt *gt)
 		engine->release = NULL;
 
 		memset(&engine->reset, 0, sizeof(engine->reset));
-
-		gt->i915->engine[id] = NULL;
 	}
 }
 
+void intel_engine_free_request_pool(struct intel_engine_cs *engine)
+{
+	if (!engine->request_pool)
+		return;
+
+	kmem_cache_free(i915_request_slab_cache(), engine->request_pool);
+}
+
 void intel_engines_free(struct intel_gt *gt)
 {
 	struct intel_engine_cs *engine;
 	enum intel_engine_id id;
 
+	/* Free the requests! dma-resv keeps fences around for an eternity */
+	rcu_barrier();
+
 	for_each_engine(engine, gt, id) {
+		intel_engine_free_request_pool(engine);
 		kfree(engine);
 		gt->engine[id] = NULL;
 	}
@@ -826,7 +834,7 @@ void intel_engine_cleanup_common(struct intel_engine_cs *engine)
 	intel_engine_cleanup_cmd_parser(engine);
 
 	if (engine->default_state)
-		i915_gem_object_put(engine->default_state);
+		fput(engine->default_state);
 
 	if (engine->kernel_context) {
 		intel_context_unpin(engine->kernel_context);
@@ -1225,6 +1233,49 @@ static void print_request(struct drm_printer *m,
 		   name);
 }
 
+static struct intel_timeline *get_timeline(struct i915_request *rq)
+{
+	struct intel_timeline *tl;
+
+	/*
+	 * Even though we are holding the engine->active.lock here, there
+	 * is no control over the submission queue per-se and we are
+	 * inspecting the active state at a random point in time, with an
+	 * unknown queue. Play safe and make sure the timeline remains valid.
+	 * (Only being used for pretty printing, one extra kref shouldn't
+	 * cause a camel stampede!)
+	 */
+	rcu_read_lock();
+	tl = rcu_dereference(rq->timeline);
+	if (!kref_get_unless_zero(&tl->kref))
+		tl = NULL;
+	rcu_read_unlock();
+
+	return tl;
+}
+
+static int print_ring(char *buf, int sz, struct i915_request *rq)
+{
+	int len = 0;
+
+	if (!i915_request_signaled(rq)) {
+		struct intel_timeline *tl = get_timeline(rq);
+
+		len = scnprintf(buf, sz,
+				"ring:{start:%08x, hwsp:%08x, seqno:%08x, runtime:%llums}, ",
+				i915_ggtt_offset(rq->ring->vma),
+				tl ? tl->hwsp_offset : 0,
+				hwsp_seqno(rq),
+				DIV_ROUND_CLOSEST_ULL(intel_context_get_total_runtime_ns(rq->context),
+						      1000 * 1000));
+
+		if (tl)
+			intel_timeline_put(tl);
+	}
+
+	return len;
+}
+
 static void hexdump(struct drm_printer *m, const void *buf, size_t len)
 {
 	const size_t rowsize = 8 * sizeof(u32);
@@ -1254,27 +1305,6 @@ static void hexdump(struct drm_printer *m, const void *buf, size_t len)
 	}
 }
 
-static struct intel_timeline *get_timeline(struct i915_request *rq)
-{
-	struct intel_timeline *tl;
-
-	/*
-	 * Even though we are holding the engine->active.lock here, there
-	 * is no control over the submission queue per-se and we are
-	 * inspecting the active state at a random point in time, with an
-	 * unknown queue. Play safe and make sure the timeline remains valid.
-	 * (Only being used for pretty printing, one extra kref shouldn't
-	 * cause a camel stampede!)
-	 */
-	rcu_read_lock();
-	tl = rcu_dereference(rq->timeline);
-	if (!kref_get_unless_zero(&tl->kref))
-		tl = NULL;
-	rcu_read_unlock();
-
-	return tl;
-}
-
 static const char *repr_timer(const struct timer_list *t)
 {
 	if (!READ_ONCE(t->expires))
@@ -1295,6 +1325,12 @@ static void intel_engine_print_registers(struct intel_engine_cs *engine,
 
 	if (engine->id == RENDER_CLASS && IS_GEN_RANGE(dev_priv, 4, 7))
 		drm_printf(m, "\tCCID: 0x%08x\n", ENGINE_READ(engine, CCID));
+	if (HAS_EXECLISTS(dev_priv)) {
+		drm_printf(m, "\tEL_STAT_HI: 0x%08x\n",
+			   ENGINE_READ(engine, RING_EXECLIST_STATUS_HI));
+		drm_printf(m, "\tEL_STAT_LO: 0x%08x\n",
+			   ENGINE_READ(engine, RING_EXECLIST_STATUS_LO));
+	}
 	drm_printf(m, "\tRING_START: 0x%08x\n",
 		   ENGINE_READ(engine, RING_START));
 	drm_printf(m, "\tRING_HEAD:  0x%08x\n",
@@ -1387,39 +1423,24 @@ static void intel_engine_print_registers(struct intel_engine_cs *engine,
 			int len;
 
 			len = scnprintf(hdr, sizeof(hdr),
-					"\t\tActive[%d]: ",
-					(int)(port - execlists->active));
-			if (!i915_request_signaled(rq)) {
-				struct intel_timeline *tl = get_timeline(rq);
-
-				len += scnprintf(hdr + len, sizeof(hdr) - len,
-						 "ring:{start:%08x, hwsp:%08x, seqno:%08x, runtime:%llums}, ",
-						 i915_ggtt_offset(rq->ring->vma),
-						 tl ? tl->hwsp_offset : 0,
-						 hwsp_seqno(rq),
-						 DIV_ROUND_CLOSEST_ULL(intel_context_get_total_runtime_ns(rq->context),
-								       1000 * 1000));
-
-				if (tl)
-					intel_timeline_put(tl);
-			}
+					"\t\tActive[%d]:  ccid:%08x, ",
+					(int)(port - execlists->active),
+					rq->context->lrc.ccid);
+			len += print_ring(hdr + len, sizeof(hdr) - len, rq);
 			scnprintf(hdr + len, sizeof(hdr) - len, "rq: ");
 			print_request(m, rq, hdr);
 		}
 		for (port = execlists->pending; (rq = *port); port++) {
-			struct intel_timeline *tl = get_timeline(rq);
-			char hdr[80];
-
-			snprintf(hdr, sizeof(hdr),
-				 "\t\tPending[%d] ring:{start:%08x, hwsp:%08x, seqno:%08x}, rq: ",
-				 (int)(port - execlists->pending),
-				 i915_ggtt_offset(rq->ring->vma),
-				 tl ? tl->hwsp_offset : 0,
-				 hwsp_seqno(rq));
-			print_request(m, rq, hdr);
+			char hdr[160];
+			int len;
 
-			if (tl)
-				intel_timeline_put(tl);
+			len = scnprintf(hdr, sizeof(hdr),
+					"\t\tPending[%d]: ccid:%08x, ",
+					(int)(port - execlists->pending),
+					rq->context->lrc.ccid);
+			len += print_ring(hdr + len, sizeof(hdr) - len, rq);
+			scnprintf(hdr + len, sizeof(hdr) - len, "rq: ");
+			print_request(m, rq, hdr);
 		}
 		rcu_read_unlock();
 		execlists_active_unlock_bh(execlists);
@@ -1568,58 +1589,6 @@ void intel_engine_dump(struct intel_engine_cs *engine,
 	intel_engine_print_breadcrumbs(engine, m);
 }
 
-/**
- * intel_enable_engine_stats() - Enable engine busy tracking on engine
- * @engine: engine to enable stats collection
- *
- * Start collecting the engine busyness data for @engine.
- *
- * Returns 0 on success or a negative error code.
- */
-int intel_enable_engine_stats(struct intel_engine_cs *engine)
-{
-	struct intel_engine_execlists *execlists = &engine->execlists;
-	unsigned long flags;
-	int err = 0;
-
-	if (!intel_engine_supports_stats(engine))
-		return -ENODEV;
-
-	execlists_active_lock_bh(execlists);
-	write_seqlock_irqsave(&engine->stats.lock, flags);
-
-	if (unlikely(engine->stats.enabled == ~0)) {
-		err = -EBUSY;
-		goto unlock;
-	}
-
-	if (engine->stats.enabled++ == 0) {
-		struct i915_request * const *port;
-		struct i915_request *rq;
-
-		engine->stats.enabled_at = ktime_get();
-
-		/* XXX submission method oblivious? */
-		for (port = execlists->active; (rq = *port); port++)
-			engine->stats.active++;
-
-		for (port = execlists->pending; (rq = *port); port++) {
-			/* Exclude any contexts already counted in active */
-			if (!intel_context_inflight_count(rq->context))
-				engine->stats.active++;
-		}
-
-		if (engine->stats.active)
-			engine->stats.start = engine->stats.enabled_at;
-	}
-
-unlock:
-	write_sequnlock_irqrestore(&engine->stats.lock, flags);
-	execlists_active_unlock_bh(execlists);
-
-	return err;
-}
-
 static ktime_t __intel_engine_get_busy_time(struct intel_engine_cs *engine)
 {
 	ktime_t total = engine->stats.total;
@@ -1628,7 +1597,7 @@ static ktime_t __intel_engine_get_busy_time(struct intel_engine_cs *engine)
 	 * If the engine is executing something at the moment
 	 * add it to the total.
 	 */
-	if (engine->stats.active)
+	if (atomic_read(&engine->stats.active))
 		total = ktime_add(total,
 				  ktime_sub(ktime_get(), engine->stats.start));
 
@@ -1654,28 +1623,6 @@ ktime_t intel_engine_get_busy_time(struct intel_engine_cs *engine)
 	return total;
 }
 
-/**
- * intel_disable_engine_stats() - Disable engine busy tracking on engine
- * @engine: engine to disable stats collection
- *
- * Stops collecting the engine busyness data for @engine.
- */
-void intel_disable_engine_stats(struct intel_engine_cs *engine)
-{
-	unsigned long flags;
-
-	if (!intel_engine_supports_stats(engine))
-		return;
-
-	write_seqlock_irqsave(&engine->stats.lock, flags);
-	WARN_ON_ONCE(engine->stats.enabled == 0);
-	if (--engine->stats.enabled == 0) {
-		engine->stats.total = __intel_engine_get_busy_time(engine);
-		engine->stats.active = 0;
-	}
-	write_sequnlock_irqrestore(&engine->stats.lock, flags);
-}
-
 static bool match_ring(struct i915_request *rq)
 {
 	u32 ring = ENGINE_READ(rq->engine, RING_START);
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c b/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c
index dd825718e4e5..5136c8bf112d 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c
+++ b/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c
@@ -31,7 +31,7 @@ static bool next_heartbeat(struct intel_engine_cs *engine)
 	delay = msecs_to_jiffies_timeout(delay);
 	if (delay >= HZ)
 		delay = round_jiffies_up_relative(delay);
-	schedule_delayed_work(&engine->heartbeat.work, delay);
+	mod_delayed_work(system_wq, &engine->heartbeat.work, delay);
 
 	return true;
 }
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pm.c b/drivers/gpu/drm/i915/gt/intel_engine_pm.c
index b6cf284e3a2d..446e35ac0224 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_pm.c
+++ b/drivers/gpu/drm/i915/gt/intel_engine_pm.c
@@ -15,6 +15,7 @@
 #include "intel_gt_pm.h"
 #include "intel_rc6.h"
 #include "intel_ring.h"
+#include "shmem_utils.h"
 
 static int __engine_unpark(struct intel_wakeref *wf)
 {
@@ -30,10 +31,8 @@ static int __engine_unpark(struct intel_wakeref *wf)
 	/* Pin the default state for fast resets from atomic context. */
 	map = NULL;
 	if (engine->default_state)
-		map = i915_gem_object_pin_map(engine->default_state,
-					      I915_MAP_WB);
-	if (!IS_ERR_OR_NULL(map))
-		engine->pinned_default_state = map;
+		map = shmem_pin_map(engine->default_state);
+	engine->pinned_default_state = map;
 
 	/* Discard stale context state from across idling */
 	ce = engine->kernel_context;
@@ -181,7 +180,7 @@ static bool switch_to_kernel_context(struct intel_engine_cs *engine)
 	 * Ergo, if we put ourselves on the timelines.active_list
 	 * (se intel_timeline_enter()) before we increment the
 	 * engine->wakeref.count, we may see the request completion and retire
-	 * it causing an undeflow of the engine->wakeref.
+	 * it causing an underflow of the engine->wakeref.
 	 */
 	flags = __timeline_mark_lock(ce);
 	GEM_BUG_ON(atomic_read(&ce->timeline->active_count) < 0);
@@ -264,7 +263,8 @@ static int __engine_park(struct intel_wakeref *wf)
 		engine->park(engine);
 
 	if (engine->pinned_default_state) {
-		i915_gem_object_unpin_map(engine->default_state);
+		shmem_unpin_map(engine->default_state,
+				engine->pinned_default_state);
 		engine->pinned_default_state = NULL;
 	}
 
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pm.h b/drivers/gpu/drm/i915/gt/intel_engine_pm.h
index e52c2b0cb245..418df0a13145 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_pm.h
+++ b/drivers/gpu/drm/i915/gt/intel_engine_pm.h
@@ -37,6 +37,12 @@ static inline void intel_engine_pm_put_async(struct intel_engine_cs *engine)
 	intel_wakeref_put_async(&engine->wakeref);
 }
 
+static inline void intel_engine_pm_put_delay(struct intel_engine_cs *engine,
+					     unsigned long delay)
+{
+	intel_wakeref_put_delay(&engine->wakeref, delay);
+}
+
 static inline void intel_engine_pm_flush(struct intel_engine_cs *engine)
 {
 	intel_wakeref_unlock_wait(&engine->wakeref);
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_types.h b/drivers/gpu/drm/i915/gt/intel_engine_types.h
index 80cdde712842..f760e2ef285b 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_types.h
+++ b/drivers/gpu/drm/i915/gt/intel_engine_types.h
@@ -156,6 +156,20 @@ struct intel_engine_execlists {
 	 */
 	struct i915_priolist default_priolist;
 
+	/**
+	 * @ccid: identifier for contexts submitted to this engine
+	 */
+	u32 ccid;
+
+	/**
+	 * @yield: CCID at the time of the last semaphore-wait interrupt.
+	 *
+	 * Instead of leaving a semaphore busy-spinning on an engine, we would
+	 * like to switch to another ready context, i.e. yielding the semaphore
+	 * timeslice.
+	 */
+	u32 yield;
+
 	/**
 	 * @error_interrupt: CS Master EIR
 	 *
@@ -295,8 +309,7 @@ struct intel_engine_cs {
 	u32 context_size;
 	u32 mmio_base;
 
-	unsigned int context_tag;
-#define NUM_CONTEXT_TAG roundup_pow_of_two(2 * EXECLIST_MAX_PORTS)
+	unsigned long context_tag;
 
 	struct rb_node uabi_node;
 
@@ -308,6 +321,9 @@ struct intel_engine_cs {
 		struct list_head hold; /* ready requests, but on hold */
 	} active;
 
+	/* keep a request in reserve for a [pm] barrier under oom */
+	struct i915_request *request_pool;
+
 	struct llist_head barrier_tasks;
 
 	struct intel_context *kernel_context; /* pinned */
@@ -323,7 +339,7 @@ struct intel_engine_cs {
 
 	unsigned long wakeref_serial;
 	struct intel_wakeref wakeref;
-	struct drm_i915_gem_object *default_state;
+	struct file *default_state;
 	void *pinned_default_state;
 
 	struct {
@@ -407,6 +423,7 @@ struct intel_engine_cs {
 	void		(*irq_enable)(struct intel_engine_cs *engine);
 	void		(*irq_disable)(struct intel_engine_cs *engine);
 
+	void		(*sanitize)(struct intel_engine_cs *engine);
 	int		(*resume)(struct intel_engine_cs *engine);
 
 	struct {
@@ -515,34 +532,34 @@ struct intel_engine_cs {
 
 	struct {
 		/**
-		 * @lock: Lock protecting the below fields.
-		 */
-		seqlock_t lock;
-		/**
-		 * @enabled: Reference count indicating number of listeners.
+		 * @active: Number of contexts currently scheduled in.
 		 */
-		unsigned int enabled;
+		atomic_t active;
+
 		/**
-		 * @active: Number of contexts currently scheduled in.
+		 * @lock: Lock protecting the below fields.
 		 */
-		unsigned int active;
+		seqlock_t lock;
+
 		/**
-		 * @enabled_at: Timestamp when busy stats were enabled.
+		 * @total: Total time this engine was busy.
+		 *
+		 * Accumulated time not counting the most recent block in cases
+		 * where engine is currently busy (active > 0).
 		 */
-		ktime_t enabled_at;
+		ktime_t total;
+
 		/**
 		 * @start: Timestamp of the last idle to active transition.
 		 *
 		 * Idle is defined as active == 0, active is active > 0.
 		 */
 		ktime_t start;
+
 		/**
-		 * @total: Total time this engine was busy.
-		 *
-		 * Accumulated time not counting the most recent block in cases
-		 * where engine is currently busy (active > 0).
+		 * @rps: Utilisation at last RPS sampling.
 		 */
-		ktime_t total;
+		ktime_t rps;
 	} stats;
 
 	struct {
diff --git a/drivers/gpu/drm/i915/gt/intel_ggtt.c b/drivers/gpu/drm/i915/gt/intel_ggtt.c
index 4c5a209cb669..66165b10256e 100644
--- a/drivers/gpu/drm/i915/gt/intel_ggtt.c
+++ b/drivers/gpu/drm/i915/gt/intel_ggtt.c
@@ -65,7 +65,7 @@ static int ggtt_init_hw(struct i915_ggtt *ggtt)
 					      ggtt->mappable_end);
 	}
 
-	i915_ggtt_init_fences(ggtt);
+	intel_ggtt_init_fences(ggtt);
 
 	return 0;
 }
@@ -715,11 +715,13 @@ static void ggtt_cleanup_hw(struct i915_ggtt *ggtt)
  */
 void i915_ggtt_driver_release(struct drm_i915_private *i915)
 {
+	struct i915_ggtt *ggtt = &i915->ggtt;
 	struct pagevec *pvec;
 
-	fini_aliasing_ppgtt(&i915->ggtt);
+	fini_aliasing_ppgtt(ggtt);
 
-	ggtt_cleanup_hw(&i915->ggtt);
+	intel_ggtt_fini_fences(ggtt);
+	ggtt_cleanup_hw(ggtt);
 
 	pvec = &i915->mm.wc_stash.pvec;
 	if (pvec->nr) {
@@ -784,13 +786,13 @@ static int ggtt_probe_common(struct i915_ggtt *ggtt, u64 size)
 	else
 		ggtt->gsm = ioremap_wc(phys_addr, size);
 	if (!ggtt->gsm) {
-		DRM_ERROR("Failed to map the ggtt page table\n");
+		drm_err(&i915->drm, "Failed to map the ggtt page table\n");
 		return -ENOMEM;
 	}
 
 	ret = setup_scratch_page(&ggtt->vm, GFP_DMA32);
 	if (ret) {
-		DRM_ERROR("Scratch setup failed\n");
+		drm_err(&i915->drm, "Scratch setup failed\n");
 		/* iounmap will also get called at remove, but meh */
 		iounmap(ggtt->gsm);
 		return ret;
@@ -838,7 +840,6 @@ static int gen8_gmch_probe(struct i915_ggtt *ggtt)
 	struct pci_dev *pdev = i915->drm.pdev;
 	unsigned int size;
 	u16 snb_gmch_ctl;
-	int err;
 
 	/* TODO: We're not aware of mappable constraints on gen8 yet */
 	if (!IS_DGFX(i915)) {
@@ -846,12 +847,6 @@ static int gen8_gmch_probe(struct i915_ggtt *ggtt)
 		ggtt->mappable_end = resource_size(&ggtt->gmadr);
 	}
 
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(39));
-	if (!err)
-		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(39));
-	if (err)
-		DRM_ERROR("Can't set DMA mask/consistent mask (%d)\n", err);
-
 	pci_read_config_word(pdev, SNB_GMCH_CTRL, &snb_gmch_ctl);
 	if (IS_CHERRYVIEW(i915))
 		size = chv_get_total_gtt_size(snb_gmch_ctl);
@@ -987,7 +982,6 @@ static int gen6_gmch_probe(struct i915_ggtt *ggtt)
 	struct pci_dev *pdev = i915->drm.pdev;
 	unsigned int size;
 	u16 snb_gmch_ctl;
-	int err;
 
 	ggtt->gmadr = pci_resource(pdev, 2);
 	ggtt->mappable_end = resource_size(&ggtt->gmadr);
@@ -997,15 +991,11 @@ static int gen6_gmch_probe(struct i915_ggtt *ggtt)
 	 * just a coarse sanity check.
 	 */
 	if (ggtt->mappable_end < (64<<20) || ggtt->mappable_end > (512<<20)) {
-		DRM_ERROR("Unknown GMADR size (%pa)\n", &ggtt->mappable_end);
+		drm_err(&i915->drm, "Unknown GMADR size (%pa)\n",
+			&ggtt->mappable_end);
 		return -ENXIO;
 	}
 
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40));
-	if (!err)
-		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40));
-	if (err)
-		DRM_ERROR("Can't set DMA mask/consistent mask (%d)\n", err);
 	pci_read_config_word(pdev, SNB_GMCH_CTRL, &snb_gmch_ctl);
 
 	size = gen6_get_total_gtt_size(snb_gmch_ctl);
@@ -1052,7 +1042,7 @@ static int i915_gmch_probe(struct i915_ggtt *ggtt)
 
 	ret = intel_gmch_probe(i915->bridge_dev, i915->drm.pdev, NULL);
 	if (!ret) {
-		DRM_ERROR("failed to set up gmch\n");
+		drm_err(&i915->drm, "failed to set up gmch\n");
 		return -EIO;
 	}
 
@@ -1075,7 +1065,7 @@ static int i915_gmch_probe(struct i915_ggtt *ggtt)
 	ggtt->vm.vma_ops.clear_pages = clear_pages;
 
 	if (unlikely(ggtt->do_idle_maps))
-		dev_notice(i915->drm.dev,
+		drm_notice(&i915->drm,
 			   "Applying Ironlake quirks for intel_iommu\n");
 
 	return 0;
@@ -1100,26 +1090,29 @@ static int ggtt_probe_hw(struct i915_ggtt *ggtt, struct intel_gt *gt)
 		return ret;
 
 	if ((ggtt->vm.total - 1) >> 32) {
-		DRM_ERROR("We never expected a Global GTT with more than 32bits"
-			  " of address space! Found %lldM!\n",
-			  ggtt->vm.total >> 20);
+		drm_err(&i915->drm,
+			"We never expected a Global GTT with more than 32bits"
+			" of address space! Found %lldM!\n",
+			ggtt->vm.total >> 20);
 		ggtt->vm.total = 1ULL << 32;
 		ggtt->mappable_end =
 			min_t(u64, ggtt->mappable_end, ggtt->vm.total);
 	}
 
 	if (ggtt->mappable_end > ggtt->vm.total) {
-		DRM_ERROR("mappable aperture extends past end of GGTT,"
-			  " aperture=%pa, total=%llx\n",
-			  &ggtt->mappable_end, ggtt->vm.total);
+		drm_err(&i915->drm,
+			"mappable aperture extends past end of GGTT,"
+			" aperture=%pa, total=%llx\n",
+			&ggtt->mappable_end, ggtt->vm.total);
 		ggtt->mappable_end = ggtt->vm.total;
 	}
 
 	/* GMADR is the PCI mmio aperture into the global GTT. */
-	DRM_DEBUG_DRIVER("GGTT size = %lluM\n", ggtt->vm.total >> 20);
-	DRM_DEBUG_DRIVER("GMADR size = %lluM\n", (u64)ggtt->mappable_end >> 20);
-	DRM_DEBUG_DRIVER("DSM size = %lluM\n",
-			 (u64)resource_size(&intel_graphics_stolen_res) >> 20);
+	drm_dbg(&i915->drm, "GGTT size = %lluM\n", ggtt->vm.total >> 20);
+	drm_dbg(&i915->drm, "GMADR size = %lluM\n",
+		(u64)ggtt->mappable_end >> 20);
+	drm_dbg(&i915->drm, "DSM size = %lluM\n",
+		(u64)resource_size(&intel_graphics_stolen_res) >> 20);
 
 	return 0;
 }
@@ -1137,7 +1130,7 @@ int i915_ggtt_probe_hw(struct drm_i915_private *i915)
 		return ret;
 
 	if (intel_vtd_active())
-		dev_info(i915->drm.dev, "VT-d active for gfx access\n");
+		drm_info(&i915->drm, "VT-d active for gfx access\n");
 
 	return 0;
 }
@@ -1212,6 +1205,8 @@ void i915_ggtt_resume(struct i915_ggtt *ggtt)
 
 	if (INTEL_GEN(ggtt->vm.i915) >= 8)
 		setup_private_pat(ggtt->vm.gt->uncore);
+
+	intel_ggtt_restore_fences(ggtt);
 }
 
 static struct scatterlist *
diff --git a/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c b/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c
new file mode 100644
index 000000000000..7fb36b12fe7a
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c
@@ -0,0 +1,909 @@
+/*
+ * Copyright © 2008-2015 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include "i915_drv.h"
+#include "i915_scatterlist.h"
+#include "i915_pvinfo.h"
+#include "i915_vgpu.h"
+
+/**
+ * DOC: fence register handling
+ *
+ * Important to avoid confusions: "fences" in the i915 driver are not execution
+ * fences used to track command completion but hardware detiler objects which
+ * wrap a given range of the global GTT. Each platform has only a fairly limited
+ * set of these objects.
+ *
+ * Fences are used to detile GTT memory mappings. They're also connected to the
+ * hardware frontbuffer render tracking and hence interact with frontbuffer
+ * compression. Furthermore on older platforms fences are required for tiled
+ * objects used by the display engine. They can also be used by the render
+ * engine - they're required for blitter commands and are optional for render
+ * commands. But on gen4+ both display (with the exception of fbc) and rendering
+ * have their own tiling state bits and don't need fences.
+ *
+ * Also note that fences only support X and Y tiling and hence can't be used for
+ * the fancier new tiling formats like W, Ys and Yf.
+ *
+ * Finally note that because fences are such a restricted resource they're
+ * dynamically associated with objects. Furthermore fence state is committed to
+ * the hardware lazily to avoid unnecessary stalls on gen2/3. Therefore code must
+ * explicitly call i915_gem_object_get_fence() to synchronize fencing status
+ * for cpu access. Also note that some code wants an unfenced view, for those
+ * cases the fence can be removed forcefully with i915_gem_object_put_fence().
+ *
+ * Internally these functions will synchronize with userspace access by removing
+ * CPU ptes into GTT mmaps (not the GTT ptes themselves) as needed.
+ */
+
+#define pipelined 0
+
+static struct drm_i915_private *fence_to_i915(struct i915_fence_reg *fence)
+{
+	return fence->ggtt->vm.i915;
+}
+
+static struct intel_uncore *fence_to_uncore(struct i915_fence_reg *fence)
+{
+	return fence->ggtt->vm.gt->uncore;
+}
+
+static void i965_write_fence_reg(struct i915_fence_reg *fence)
+{
+	i915_reg_t fence_reg_lo, fence_reg_hi;
+	int fence_pitch_shift;
+	u64 val;
+
+	if (INTEL_GEN(fence_to_i915(fence)) >= 6) {
+		fence_reg_lo = FENCE_REG_GEN6_LO(fence->id);
+		fence_reg_hi = FENCE_REG_GEN6_HI(fence->id);
+		fence_pitch_shift = GEN6_FENCE_PITCH_SHIFT;
+
+	} else {
+		fence_reg_lo = FENCE_REG_965_LO(fence->id);
+		fence_reg_hi = FENCE_REG_965_HI(fence->id);
+		fence_pitch_shift = I965_FENCE_PITCH_SHIFT;
+	}
+
+	val = 0;
+	if (fence->tiling) {
+		unsigned int stride = fence->stride;
+
+		GEM_BUG_ON(!IS_ALIGNED(stride, 128));
+
+		val = fence->start + fence->size - I965_FENCE_PAGE;
+		val <<= 32;
+		val |= fence->start;
+		val |= (u64)((stride / 128) - 1) << fence_pitch_shift;
+		if (fence->tiling == I915_TILING_Y)
+			val |= BIT(I965_FENCE_TILING_Y_SHIFT);
+		val |= I965_FENCE_REG_VALID;
+	}
+
+	if (!pipelined) {
+		struct intel_uncore *uncore = fence_to_uncore(fence);
+
+		/*
+		 * To w/a incoherency with non-atomic 64-bit register updates,
+		 * we split the 64-bit update into two 32-bit writes. In order
+		 * for a partial fence not to be evaluated between writes, we
+		 * precede the update with write to turn off the fence register,
+		 * and only enable the fence as the last step.
+		 *
+		 * For extra levels of paranoia, we make sure each step lands
+		 * before applying the next step.
+		 */
+		intel_uncore_write_fw(uncore, fence_reg_lo, 0);
+		intel_uncore_posting_read_fw(uncore, fence_reg_lo);
+
+		intel_uncore_write_fw(uncore, fence_reg_hi, upper_32_bits(val));
+		intel_uncore_write_fw(uncore, fence_reg_lo, lower_32_bits(val));
+		intel_uncore_posting_read_fw(uncore, fence_reg_lo);
+	}
+}
+
+static void i915_write_fence_reg(struct i915_fence_reg *fence)
+{
+	u32 val;
+
+	val = 0;
+	if (fence->tiling) {
+		unsigned int stride = fence->stride;
+		unsigned int tiling = fence->tiling;
+		bool is_y_tiled = tiling == I915_TILING_Y;
+
+		if (is_y_tiled && HAS_128_BYTE_Y_TILING(fence_to_i915(fence)))
+			stride /= 128;
+		else
+			stride /= 512;
+		GEM_BUG_ON(!is_power_of_2(stride));
+
+		val = fence->start;
+		if (is_y_tiled)
+			val |= BIT(I830_FENCE_TILING_Y_SHIFT);
+		val |= I915_FENCE_SIZE_BITS(fence->size);
+		val |= ilog2(stride) << I830_FENCE_PITCH_SHIFT;
+
+		val |= I830_FENCE_REG_VALID;
+	}
+
+	if (!pipelined) {
+		struct intel_uncore *uncore = fence_to_uncore(fence);
+		i915_reg_t reg = FENCE_REG(fence->id);
+
+		intel_uncore_write_fw(uncore, reg, val);
+		intel_uncore_posting_read_fw(uncore, reg);
+	}
+}
+
+static void i830_write_fence_reg(struct i915_fence_reg *fence)
+{
+	u32 val;
+
+	val = 0;
+	if (fence->tiling) {
+		unsigned int stride = fence->stride;
+
+		val = fence->start;
+		if (fence->tiling == I915_TILING_Y)
+			val |= BIT(I830_FENCE_TILING_Y_SHIFT);
+		val |= I830_FENCE_SIZE_BITS(fence->size);
+		val |= ilog2(stride / 128) << I830_FENCE_PITCH_SHIFT;
+		val |= I830_FENCE_REG_VALID;
+	}
+
+	if (!pipelined) {
+		struct intel_uncore *uncore = fence_to_uncore(fence);
+		i915_reg_t reg = FENCE_REG(fence->id);
+
+		intel_uncore_write_fw(uncore, reg, val);
+		intel_uncore_posting_read_fw(uncore, reg);
+	}
+}
+
+static void fence_write(struct i915_fence_reg *fence)
+{
+	struct drm_i915_private *i915 = fence_to_i915(fence);
+
+	/*
+	 * Previous access through the fence register is marshalled by
+	 * the mb() inside the fault handlers (i915_gem_release_mmaps)
+	 * and explicitly managed for internal users.
+	 */
+
+	if (IS_GEN(i915, 2))
+		i830_write_fence_reg(fence);
+	else if (IS_GEN(i915, 3))
+		i915_write_fence_reg(fence);
+	else
+		i965_write_fence_reg(fence);
+
+	/*
+	 * Access through the fenced region afterwards is
+	 * ordered by the posting reads whilst writing the registers.
+	 */
+}
+
+static bool gpu_uses_fence_registers(struct i915_fence_reg *fence)
+{
+	return INTEL_GEN(fence_to_i915(fence)) < 4;
+}
+
+static int fence_update(struct i915_fence_reg *fence,
+			struct i915_vma *vma)
+{
+	struct i915_ggtt *ggtt = fence->ggtt;
+	struct intel_uncore *uncore = fence_to_uncore(fence);
+	intel_wakeref_t wakeref;
+	struct i915_vma *old;
+	int ret;
+
+	fence->tiling = 0;
+	if (vma) {
+		GEM_BUG_ON(!i915_gem_object_get_stride(vma->obj) ||
+			   !i915_gem_object_get_tiling(vma->obj));
+
+		if (!i915_vma_is_map_and_fenceable(vma))
+			return -EINVAL;
+
+		if (gpu_uses_fence_registers(fence)) {
+			/* implicit 'unfenced' GPU blits */
+			ret = i915_vma_sync(vma);
+			if (ret)
+				return ret;
+		}
+
+		fence->start = vma->node.start;
+		fence->size = vma->fence_size;
+		fence->stride = i915_gem_object_get_stride(vma->obj);
+		fence->tiling = i915_gem_object_get_tiling(vma->obj);
+	}
+	WRITE_ONCE(fence->dirty, false);
+
+	old = xchg(&fence->vma, NULL);
+	if (old) {
+		/* XXX Ideally we would move the waiting to outside the mutex */
+		ret = i915_active_wait(&fence->active);
+		if (ret) {
+			fence->vma = old;
+			return ret;
+		}
+
+		i915_vma_flush_writes(old);
+
+		/*
+		 * Ensure that all userspace CPU access is completed before
+		 * stealing the fence.
+		 */
+		if (old != vma) {
+			GEM_BUG_ON(old->fence != fence);
+			i915_vma_revoke_mmap(old);
+			old->fence = NULL;
+		}
+
+		list_move(&fence->link, &ggtt->fence_list);
+	}
+
+	/*
+	 * We only need to update the register itself if the device is awake.
+	 * If the device is currently powered down, we will defer the write
+	 * to the runtime resume, see intel_ggtt_restore_fences().
+	 *
+	 * This only works for removing the fence register, on acquisition
+	 * the caller must hold the rpm wakeref. The fence register must
+	 * be cleared before we can use any other fences to ensure that
+	 * the new fences do not overlap the elided clears, confusing HW.
+	 */
+	wakeref = intel_runtime_pm_get_if_in_use(uncore->rpm);
+	if (!wakeref) {
+		GEM_BUG_ON(vma);
+		return 0;
+	}
+
+	WRITE_ONCE(fence->vma, vma);
+	fence_write(fence);
+
+	if (vma) {
+		vma->fence = fence;
+		list_move_tail(&fence->link, &ggtt->fence_list);
+	}
+
+	intel_runtime_pm_put(uncore->rpm, wakeref);
+	return 0;
+}
+
+/**
+ * i915_vma_revoke_fence - force-remove fence for a VMA
+ * @vma: vma to map linearly (not through a fence reg)
+ *
+ * This function force-removes any fence from the given object, which is useful
+ * if the kernel wants to do untiled GTT access.
+ */
+void i915_vma_revoke_fence(struct i915_vma *vma)
+{
+	struct i915_fence_reg *fence = vma->fence;
+	intel_wakeref_t wakeref;
+
+	lockdep_assert_held(&vma->vm->mutex);
+	if (!fence)
+		return;
+
+	GEM_BUG_ON(fence->vma != vma);
+	GEM_BUG_ON(!i915_active_is_idle(&fence->active));
+	GEM_BUG_ON(atomic_read(&fence->pin_count));
+
+	fence->tiling = 0;
+	WRITE_ONCE(fence->vma, NULL);
+	vma->fence = NULL;
+
+	with_intel_runtime_pm_if_in_use(fence_to_uncore(fence)->rpm, wakeref)
+		fence_write(fence);
+}
+
+static struct i915_fence_reg *fence_find(struct i915_ggtt *ggtt)
+{
+	struct i915_fence_reg *fence;
+
+	list_for_each_entry(fence, &ggtt->fence_list, link) {
+		GEM_BUG_ON(fence->vma && fence->vma->fence != fence);
+
+		if (atomic_read(&fence->pin_count))
+			continue;
+
+		return fence;
+	}
+
+	/* Wait for completion of pending flips which consume fences */
+	if (intel_has_pending_fb_unpin(ggtt->vm.i915))
+		return ERR_PTR(-EAGAIN);
+
+	return ERR_PTR(-EDEADLK);
+}
+
+int __i915_vma_pin_fence(struct i915_vma *vma)
+{
+	struct i915_ggtt *ggtt = i915_vm_to_ggtt(vma->vm);
+	struct i915_fence_reg *fence;
+	struct i915_vma *set = i915_gem_object_is_tiled(vma->obj) ? vma : NULL;
+	int err;
+
+	lockdep_assert_held(&vma->vm->mutex);
+
+	/* Just update our place in the LRU if our fence is getting reused. */
+	if (vma->fence) {
+		fence = vma->fence;
+		GEM_BUG_ON(fence->vma != vma);
+		atomic_inc(&fence->pin_count);
+		if (!fence->dirty) {
+			list_move_tail(&fence->link, &ggtt->fence_list);
+			return 0;
+		}
+	} else if (set) {
+		fence = fence_find(ggtt);
+		if (IS_ERR(fence))
+			return PTR_ERR(fence);
+
+		GEM_BUG_ON(atomic_read(&fence->pin_count));
+		atomic_inc(&fence->pin_count);
+	} else {
+		return 0;
+	}
+
+	err = fence_update(fence, set);
+	if (err)
+		goto out_unpin;
+
+	GEM_BUG_ON(fence->vma != set);
+	GEM_BUG_ON(vma->fence != (set ? fence : NULL));
+
+	if (set)
+		return 0;
+
+out_unpin:
+	atomic_dec(&fence->pin_count);
+	return err;
+}
+
+/**
+ * i915_vma_pin_fence - set up fencing for a vma
+ * @vma: vma to map through a fence reg
+ *
+ * When mapping objects through the GTT, userspace wants to be able to write
+ * to them without having to worry about swizzling if the object is tiled.
+ * This function walks the fence regs looking for a free one for @obj,
+ * stealing one if it can't find any.
+ *
+ * It then sets up the reg based on the object's properties: address, pitch
+ * and tiling format.
+ *
+ * For an untiled surface, this removes any existing fence.
+ *
+ * Returns:
+ *
+ * 0 on success, negative error code on failure.
+ */
+int i915_vma_pin_fence(struct i915_vma *vma)
+{
+	int err;
+
+	if (!vma->fence && !i915_gem_object_is_tiled(vma->obj))
+		return 0;
+
+	/*
+	 * Note that we revoke fences on runtime suspend. Therefore the user
+	 * must keep the device awake whilst using the fence.
+	 */
+	assert_rpm_wakelock_held(vma->vm->gt->uncore->rpm);
+	GEM_BUG_ON(!i915_vma_is_pinned(vma));
+	GEM_BUG_ON(!i915_vma_is_ggtt(vma));
+
+	err = mutex_lock_interruptible(&vma->vm->mutex);
+	if (err)
+		return err;
+
+	err = __i915_vma_pin_fence(vma);
+	mutex_unlock(&vma->vm->mutex);
+
+	return err;
+}
+
+/**
+ * i915_reserve_fence - Reserve a fence for vGPU
+ * @ggtt: Global GTT
+ *
+ * This function walks the fence regs looking for a free one and remove
+ * it from the fence_list. It is used to reserve fence for vGPU to use.
+ */
+struct i915_fence_reg *i915_reserve_fence(struct i915_ggtt *ggtt)
+{
+	struct i915_fence_reg *fence;
+	int count;
+	int ret;
+
+	lockdep_assert_held(&ggtt->vm.mutex);
+
+	/* Keep at least one fence available for the display engine. */
+	count = 0;
+	list_for_each_entry(fence, &ggtt->fence_list, link)
+		count += !atomic_read(&fence->pin_count);
+	if (count <= 1)
+		return ERR_PTR(-ENOSPC);
+
+	fence = fence_find(ggtt);
+	if (IS_ERR(fence))
+		return fence;
+
+	if (fence->vma) {
+		/* Force-remove fence from VMA */
+		ret = fence_update(fence, NULL);
+		if (ret)
+			return ERR_PTR(ret);
+	}
+
+	list_del(&fence->link);
+
+	return fence;
+}
+
+/**
+ * i915_unreserve_fence - Reclaim a reserved fence
+ * @fence: the fence reg
+ *
+ * This function add a reserved fence register from vGPU to the fence_list.
+ */
+void i915_unreserve_fence(struct i915_fence_reg *fence)
+{
+	struct i915_ggtt *ggtt = fence->ggtt;
+
+	lockdep_assert_held(&ggtt->vm.mutex);
+
+	list_add(&fence->link, &ggtt->fence_list);
+}
+
+/**
+ * intel_ggtt_restore_fences - restore fence state
+ * @ggtt: Global GTT
+ *
+ * Restore the hw fence state to match the software tracking again, to be called
+ * after a gpu reset and on resume. Note that on runtime suspend we only cancel
+ * the fences, to be reacquired by the user later.
+ */
+void intel_ggtt_restore_fences(struct i915_ggtt *ggtt)
+{
+	int i;
+
+	for (i = 0; i < ggtt->num_fences; i++)
+		fence_write(&ggtt->fence_regs[i]);
+}
+
+/**
+ * DOC: tiling swizzling details
+ *
+ * The idea behind tiling is to increase cache hit rates by rearranging
+ * pixel data so that a group of pixel accesses are in the same cacheline.
+ * Performance improvement from doing this on the back/depth buffer are on
+ * the order of 30%.
+ *
+ * Intel architectures make this somewhat more complicated, though, by
+ * adjustments made to addressing of data when the memory is in interleaved
+ * mode (matched pairs of DIMMS) to improve memory bandwidth.
+ * For interleaved memory, the CPU sends every sequential 64 bytes
+ * to an alternate memory channel so it can get the bandwidth from both.
+ *
+ * The GPU also rearranges its accesses for increased bandwidth to interleaved
+ * memory, and it matches what the CPU does for non-tiled.  However, when tiled
+ * it does it a little differently, since one walks addresses not just in the
+ * X direction but also Y.  So, along with alternating channels when bit
+ * 6 of the address flips, it also alternates when other bits flip --  Bits 9
+ * (every 512 bytes, an X tile scanline) and 10 (every two X tile scanlines)
+ * are common to both the 915 and 965-class hardware.
+ *
+ * The CPU also sometimes XORs in higher bits as well, to improve
+ * bandwidth doing strided access like we do so frequently in graphics.  This
+ * is called "Channel XOR Randomization" in the MCH documentation.  The result
+ * is that the CPU is XORing in either bit 11 or bit 17 to bit 6 of its address
+ * decode.
+ *
+ * All of this bit 6 XORing has an effect on our memory management,
+ * as we need to make sure that the 3d driver can correctly address object
+ * contents.
+ *
+ * If we don't have interleaved memory, all tiling is safe and no swizzling is
+ * required.
+ *
+ * When bit 17 is XORed in, we simply refuse to tile at all.  Bit
+ * 17 is not just a page offset, so as we page an object out and back in,
+ * individual pages in it will have different bit 17 addresses, resulting in
+ * each 64 bytes being swapped with its neighbor!
+ *
+ * Otherwise, if interleaved, we have to tell the 3d driver what the address
+ * swizzling it needs to do is, since it's writing with the CPU to the pages
+ * (bit 6 and potentially bit 11 XORed in), and the GPU is reading from the
+ * pages (bit 6, 9, and 10 XORed in), resulting in a cumulative bit swizzling
+ * required by the CPU of XORing in bit 6, 9, 10, and potentially 11, in order
+ * to match what the GPU expects.
+ */
+
+/**
+ * detect_bit_6_swizzle - detect bit 6 swizzling pattern
+ * @ggtt: Global GGTT
+ *
+ * Detects bit 6 swizzling of address lookup between IGD access and CPU
+ * access through main memory.
+ */
+static void detect_bit_6_swizzle(struct i915_ggtt *ggtt)
+{
+	struct intel_uncore *uncore = ggtt->vm.gt->uncore;
+	struct drm_i915_private *i915 = ggtt->vm.i915;
+	u32 swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
+	u32 swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+
+	if (INTEL_GEN(i915) >= 8 || IS_VALLEYVIEW(i915)) {
+		/*
+		 * On BDW+, swizzling is not used. We leave the CPU memory
+		 * controller in charge of optimizing memory accesses without
+		 * the extra address manipulation GPU side.
+		 *
+		 * VLV and CHV don't have GPU swizzling.
+		 */
+		swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+		swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+	} else if (INTEL_GEN(i915) >= 6) {
+		if (i915->preserve_bios_swizzle) {
+			if (intel_uncore_read(uncore, DISP_ARB_CTL) &
+			    DISP_TILE_SURFACE_SWIZZLING) {
+				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+				swizzle_y = I915_BIT_6_SWIZZLE_9;
+			} else {
+				swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+				swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+			}
+		} else {
+			u32 dimm_c0, dimm_c1;
+			dimm_c0 = intel_uncore_read(uncore, MAD_DIMM_C0);
+			dimm_c1 = intel_uncore_read(uncore, MAD_DIMM_C1);
+			dimm_c0 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
+			dimm_c1 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
+			/*
+			 * Enable swizzling when the channels are populated
+			 * with identically sized dimms. We don't need to check
+			 * the 3rd channel because no cpu with gpu attached
+			 * ships in that configuration. Also, swizzling only
+			 * makes sense for 2 channels anyway.
+			 */
+			if (dimm_c0 == dimm_c1) {
+				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+				swizzle_y = I915_BIT_6_SWIZZLE_9;
+			} else {
+				swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+				swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+			}
+		}
+	} else if (IS_GEN(i915, 5)) {
+		/*
+		 * On Ironlake whatever DRAM config, GPU always do
+		 * same swizzling setup.
+		 */
+		swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+		swizzle_y = I915_BIT_6_SWIZZLE_9;
+	} else if (IS_GEN(i915, 2)) {
+		/*
+		 * As far as we know, the 865 doesn't have these bit 6
+		 * swizzling issues.
+		 */
+		swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+		swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+	} else if (IS_G45(i915) || IS_I965G(i915) || IS_G33(i915)) {
+		/*
+		 * The 965, G33, and newer, have a very flexible memory
+		 * configuration.  It will enable dual-channel mode
+		 * (interleaving) on as much memory as it can, and the GPU
+		 * will additionally sometimes enable different bit 6
+		 * swizzling for tiled objects from the CPU.
+		 *
+		 * Here's what I found on the G965:
+		 *    slot fill         memory size  swizzling
+		 * 0A   0B   1A   1B    1-ch   2-ch
+		 * 512  0    0    0     512    0     O
+		 * 512  0    512  0     16     1008  X
+		 * 512  0    0    512   16     1008  X
+		 * 0    512  0    512   16     1008  X
+		 * 1024 1024 1024 0     2048   1024  O
+		 *
+		 * We could probably detect this based on either the DRB
+		 * matching, which was the case for the swizzling required in
+		 * the table above, or from the 1-ch value being less than
+		 * the minimum size of a rank.
+		 *
+		 * Reports indicate that the swizzling actually
+		 * varies depending upon page placement inside the
+		 * channels, i.e. we see swizzled pages where the
+		 * banks of memory are paired and unswizzled on the
+		 * uneven portion, so leave that as unknown.
+		 */
+		if (intel_uncore_read(uncore, C0DRB3) ==
+		    intel_uncore_read(uncore, C1DRB3)) {
+			swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+			swizzle_y = I915_BIT_6_SWIZZLE_9;
+		}
+	} else {
+		u32 dcc = intel_uncore_read(uncore, DCC);
+
+		/*
+		 * On 9xx chipsets, channel interleave by the CPU is
+		 * determined by DCC.  For single-channel, neither the CPU
+		 * nor the GPU do swizzling.  For dual channel interleaved,
+		 * the GPU's interleave is bit 9 and 10 for X tiled, and bit
+		 * 9 for Y tiled.  The CPU's interleave is independent, and
+		 * can be based on either bit 11 (haven't seen this yet) or
+		 * bit 17 (common).
+		 */
+		switch (dcc & DCC_ADDRESSING_MODE_MASK) {
+		case DCC_ADDRESSING_MODE_SINGLE_CHANNEL:
+		case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC:
+			swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+			swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+			break;
+		case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED:
+			if (dcc & DCC_CHANNEL_XOR_DISABLE) {
+				/*
+				 * This is the base swizzling by the GPU for
+				 * tiled buffers.
+				 */
+				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+				swizzle_y = I915_BIT_6_SWIZZLE_9;
+			} else if ((dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
+				/* Bit 11 swizzling by the CPU in addition. */
+				swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
+				swizzle_y = I915_BIT_6_SWIZZLE_9_11;
+			} else {
+				/* Bit 17 swizzling by the CPU in addition. */
+				swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
+				swizzle_y = I915_BIT_6_SWIZZLE_9_17;
+			}
+			break;
+		}
+
+		/* check for L-shaped memory aka modified enhanced addressing */
+		if (IS_GEN(i915, 4) &&
+		    !(intel_uncore_read(uncore, DCC2) & DCC2_MODIFIED_ENHANCED_DISABLE)) {
+			swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
+			swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+		}
+
+		if (dcc == 0xffffffff) {
+			drm_err(&i915->drm, "Couldn't read from MCHBAR.  "
+				  "Disabling tiling.\n");
+			swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
+			swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+		}
+	}
+
+	if (swizzle_x == I915_BIT_6_SWIZZLE_UNKNOWN ||
+	    swizzle_y == I915_BIT_6_SWIZZLE_UNKNOWN) {
+		/*
+		 * Userspace likes to explode if it sees unknown swizzling,
+		 * so lie. We will finish the lie when reporting through
+		 * the get-tiling-ioctl by reporting the physical swizzle
+		 * mode as unknown instead.
+		 *
+		 * As we don't strictly know what the swizzling is, it may be
+		 * bit17 dependent, and so we need to also prevent the pages
+		 * from being moved.
+		 */
+		i915->quirks |= QUIRK_PIN_SWIZZLED_PAGES;
+		swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+		swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+	}
+
+	i915->ggtt.bit_6_swizzle_x = swizzle_x;
+	i915->ggtt.bit_6_swizzle_y = swizzle_y;
+}
+
+/*
+ * Swap every 64 bytes of this page around, to account for it having a new
+ * bit 17 of its physical address and therefore being interpreted differently
+ * by the GPU.
+ */
+static void swizzle_page(struct page *page)
+{
+	char temp[64];
+	char *vaddr;
+	int i;
+
+	vaddr = kmap(page);
+
+	for (i = 0; i < PAGE_SIZE; i += 128) {
+		memcpy(temp, &vaddr[i], 64);
+		memcpy(&vaddr[i], &vaddr[i + 64], 64);
+		memcpy(&vaddr[i + 64], temp, 64);
+	}
+
+	kunmap(page);
+}
+
+/**
+ * i915_gem_object_do_bit_17_swizzle - fixup bit 17 swizzling
+ * @obj: i915 GEM buffer object
+ * @pages: the scattergather list of physical pages
+ *
+ * This function fixes up the swizzling in case any page frame number for this
+ * object has changed in bit 17 since that state has been saved with
+ * i915_gem_object_save_bit_17_swizzle().
+ *
+ * This is called when pinning backing storage again, since the kernel is free
+ * to move unpinned backing storage around (either by directly moving pages or
+ * by swapping them out and back in again).
+ */
+void
+i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj,
+				  struct sg_table *pages)
+{
+	struct sgt_iter sgt_iter;
+	struct page *page;
+	int i;
+
+	if (obj->bit_17 == NULL)
+		return;
+
+	i = 0;
+	for_each_sgt_page(page, sgt_iter, pages) {
+		char new_bit_17 = page_to_phys(page) >> 17;
+		if ((new_bit_17 & 0x1) != (test_bit(i, obj->bit_17) != 0)) {
+			swizzle_page(page);
+			set_page_dirty(page);
+		}
+		i++;
+	}
+}
+
+/**
+ * i915_gem_object_save_bit_17_swizzle - save bit 17 swizzling
+ * @obj: i915 GEM buffer object
+ * @pages: the scattergather list of physical pages
+ *
+ * This function saves the bit 17 of each page frame number so that swizzling
+ * can be fixed up later on with i915_gem_object_do_bit_17_swizzle(). This must
+ * be called before the backing storage can be unpinned.
+ */
+void
+i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj,
+				    struct sg_table *pages)
+{
+	const unsigned int page_count = obj->base.size >> PAGE_SHIFT;
+	struct sgt_iter sgt_iter;
+	struct page *page;
+	int i;
+
+	if (obj->bit_17 == NULL) {
+		obj->bit_17 = bitmap_zalloc(page_count, GFP_KERNEL);
+		if (obj->bit_17 == NULL) {
+			DRM_ERROR("Failed to allocate memory for bit 17 "
+				  "record\n");
+			return;
+		}
+	}
+
+	i = 0;
+
+	for_each_sgt_page(page, sgt_iter, pages) {
+		if (page_to_phys(page) & (1 << 17))
+			__set_bit(i, obj->bit_17);
+		else
+			__clear_bit(i, obj->bit_17);
+		i++;
+	}
+}
+
+void intel_ggtt_init_fences(struct i915_ggtt *ggtt)
+{
+	struct drm_i915_private *i915 = ggtt->vm.i915;
+	struct intel_uncore *uncore = ggtt->vm.gt->uncore;
+	int num_fences;
+	int i;
+
+	INIT_LIST_HEAD(&ggtt->fence_list);
+	INIT_LIST_HEAD(&ggtt->userfault_list);
+	intel_wakeref_auto_init(&ggtt->userfault_wakeref, uncore->rpm);
+
+	detect_bit_6_swizzle(ggtt);
+
+	if (!i915_ggtt_has_aperture(ggtt))
+		num_fences = 0;
+	else if (INTEL_GEN(i915) >= 7 &&
+		 !(IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)))
+		num_fences = 32;
+	else if (INTEL_GEN(i915) >= 4 ||
+		 IS_I945G(i915) || IS_I945GM(i915) ||
+		 IS_G33(i915) || IS_PINEVIEW(i915))
+		num_fences = 16;
+	else
+		num_fences = 8;
+
+	if (intel_vgpu_active(i915))
+		num_fences = intel_uncore_read(uncore,
+					       vgtif_reg(avail_rs.fence_num));
+	ggtt->fence_regs = kcalloc(num_fences,
+				   sizeof(*ggtt->fence_regs),
+				   GFP_KERNEL);
+	if (!ggtt->fence_regs)
+		num_fences = 0;
+
+	/* Initialize fence registers to zero */
+	for (i = 0; i < num_fences; i++) {
+		struct i915_fence_reg *fence = &ggtt->fence_regs[i];
+
+		i915_active_init(&fence->active, NULL, NULL);
+		fence->ggtt = ggtt;
+		fence->id = i;
+		list_add_tail(&fence->link, &ggtt->fence_list);
+	}
+	ggtt->num_fences = num_fences;
+
+	intel_ggtt_restore_fences(ggtt);
+}
+
+void intel_ggtt_fini_fences(struct i915_ggtt *ggtt)
+{
+	int i;
+
+	for (i = 0; i < ggtt->num_fences; i++) {
+		struct i915_fence_reg *fence = &ggtt->fence_regs[i];
+
+		i915_active_fini(&fence->active);
+	}
+
+	kfree(ggtt->fence_regs);
+}
+
+void intel_gt_init_swizzling(struct intel_gt *gt)
+{
+	struct drm_i915_private *i915 = gt->i915;
+	struct intel_uncore *uncore = gt->uncore;
+
+	if (INTEL_GEN(i915) < 5 ||
+	    i915->ggtt.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_NONE)
+		return;
+
+	intel_uncore_rmw(uncore, DISP_ARB_CTL, 0, DISP_TILE_SURFACE_SWIZZLING);
+
+	if (IS_GEN(i915, 5))
+		return;
+
+	intel_uncore_rmw(uncore, TILECTL, 0, TILECTL_SWZCTL);
+
+	if (IS_GEN(i915, 6))
+		intel_uncore_write(uncore,
+				   ARB_MODE,
+				   _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_SNB));
+	else if (IS_GEN(i915, 7))
+		intel_uncore_write(uncore,
+				   ARB_MODE,
+				   _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_IVB));
+	else if (IS_GEN(i915, 8))
+		intel_uncore_write(uncore,
+				   GAMTARBMODE,
+				   _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_BDW));
+	else
+		MISSING_CASE(INTEL_GEN(i915));
+}
diff --git a/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.h b/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.h
new file mode 100644
index 000000000000..9eef679e1311
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#ifndef __INTEL_GGTT_FENCING_H__
+#define __INTEL_GGTT_FENCING_H__
+
+#include <linux/list.h>
+#include <linux/types.h>
+
+#include "i915_active.h"
+
+struct drm_i915_gem_object;
+struct i915_ggtt;
+struct i915_vma;
+struct intel_gt;
+struct sg_table;
+
+#define I965_FENCE_PAGE 4096UL
+
+struct i915_fence_reg {
+	struct list_head link;
+	struct i915_ggtt *ggtt;
+	struct i915_vma *vma;
+	atomic_t pin_count;
+	struct i915_active active;
+	int id;
+	/**
+	 * Whether the tiling parameters for the currently
+	 * associated fence register have changed. Note that
+	 * for the purposes of tracking tiling changes we also
+	 * treat the unfenced register, the register slot that
+	 * the object occupies whilst it executes a fenced
+	 * command (such as BLT on gen2/3), as a "fence".
+	 */
+	bool dirty;
+	u32 start;
+	u32 size;
+	u32 tiling;
+	u32 stride;
+};
+
+struct i915_fence_reg *i915_reserve_fence(struct i915_ggtt *ggtt);
+void i915_unreserve_fence(struct i915_fence_reg *fence);
+
+void intel_ggtt_restore_fences(struct i915_ggtt *ggtt);
+
+void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj,
+				       struct sg_table *pages);
+void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj,
+					 struct sg_table *pages);
+
+void intel_ggtt_init_fences(struct i915_ggtt *ggtt);
+void intel_ggtt_fini_fences(struct i915_ggtt *ggtt);
+
+void intel_gt_init_swizzling(struct intel_gt *gt);
+
+#endif
diff --git a/drivers/gpu/drm/i915/gt/intel_gpu_commands.h b/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
index f04214a54f75..ee10122a511e 100644
--- a/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
+++ b/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
@@ -138,7 +138,7 @@
  */
 #define MI_LOAD_REGISTER_IMM(x)	MI_INSTR(0x22, 2*(x)-1)
 /* Gen11+. addr = base + (ctx_restore ? offset & GENMASK(12,2) : offset) */
-#define   MI_LRI_CS_MMIO		(1<<19)
+#define   MI_LRI_LRM_CS_MMIO		REG_BIT(19)
 #define   MI_LRI_FORCE_POSTED		(1<<12)
 #define MI_LOAD_REGISTER_IMM_MAX_REGS (126)
 #define MI_STORE_REGISTER_MEM        MI_INSTR(0x24, 1)
@@ -156,6 +156,7 @@
 #define MI_LOAD_REGISTER_MEM	   MI_INSTR(0x29, 1)
 #define MI_LOAD_REGISTER_MEM_GEN8  MI_INSTR(0x29, 2)
 #define MI_LOAD_REGISTER_REG    MI_INSTR(0x2A, 1)
+#define   MI_LRR_SOURCE_CS_MMIO		REG_BIT(18)
 #define MI_BATCH_BUFFER		MI_INSTR(0x30, 1)
 #define   MI_BATCH_NON_SECURE		(1)
 /* for snb/ivb/vlv this also means "batch in ppgtt" when ppgtt is enabled. */
diff --git a/drivers/gpu/drm/i915/gt/intel_gt.c b/drivers/gpu/drm/i915/gt/intel_gt.c
index d09f7596cb98..52593edf8aa0 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt.c
@@ -7,6 +7,7 @@
 #include "i915_drv.h"
 #include "intel_context.h"
 #include "intel_gt.h"
+#include "intel_gt_clock_utils.h"
 #include "intel_gt_pm.h"
 #include "intel_gt_requests.h"
 #include "intel_mocs.h"
@@ -15,6 +16,7 @@
 #include "intel_rps.h"
 #include "intel_uncore.h"
 #include "intel_pm.h"
+#include "shmem_utils.h"
 
 void intel_gt_init_early(struct intel_gt *gt, struct drm_i915_private *i915)
 {
@@ -370,18 +372,6 @@ static struct i915_address_space *kernel_vm(struct intel_gt *gt)
 		return i915_vm_get(&gt->ggtt->vm);
 }
 
-static int __intel_context_flush_retire(struct intel_context *ce)
-{
-	struct intel_timeline *tl;
-
-	tl = intel_context_timeline_lock(ce);
-	if (IS_ERR(tl))
-		return PTR_ERR(tl);
-
-	intel_context_timeline_unlock(tl);
-	return 0;
-}
-
 static int __engines_record_defaults(struct intel_gt *gt)
 {
 	struct i915_request *requests[I915_NUM_ENGINES] = {};
@@ -447,8 +437,7 @@ static int __engines_record_defaults(struct intel_gt *gt)
 
 	for (id = 0; id < ARRAY_SIZE(requests); id++) {
 		struct i915_request *rq;
-		struct i915_vma *state;
-		void *vaddr;
+		struct file *state;
 
 		rq = requests[id];
 		if (!rq)
@@ -460,48 +449,16 @@ static int __engines_record_defaults(struct intel_gt *gt)
 		}
 
 		GEM_BUG_ON(!test_bit(CONTEXT_ALLOC_BIT, &rq->context->flags));
-		state = rq->context->state;
-		if (!state)
+		if (!rq->context->state)
 			continue;
 
-		/* Serialise with retirement on another CPU */
-		GEM_BUG_ON(!i915_request_completed(rq));
-		err = __intel_context_flush_retire(rq->context);
-		if (err)
-			goto out;
-
-		/* We want to be able to unbind the state from the GGTT */
-		GEM_BUG_ON(intel_context_is_pinned(rq->context));
-
-		/*
-		 * As we will hold a reference to the logical state, it will
-		 * not be torn down with the context, and importantly the
-		 * object will hold onto its vma (making it possible for a
-		 * stray GTT write to corrupt our defaults). Unmap the vma
-		 * from the GTT to prevent such accidents and reclaim the
-		 * space.
-		 */
-		err = i915_vma_unbind(state);
-		if (err)
-			goto out;
-
-		i915_gem_object_lock(state->obj);
-		err = i915_gem_object_set_to_cpu_domain(state->obj, false);
-		i915_gem_object_unlock(state->obj);
-		if (err)
-			goto out;
-
-		i915_gem_object_set_cache_coherency(state->obj, I915_CACHE_LLC);
-
-		/* Check we can acquire the image of the context state */
-		vaddr = i915_gem_object_pin_map(state->obj, I915_MAP_FORCE_WB);
-		if (IS_ERR(vaddr)) {
-			err = PTR_ERR(vaddr);
+		/* Keep a copy of the state's backing pages; free the obj */
+		state = shmem_create_from_object(rq->context->state->obj);
+		if (IS_ERR(state)) {
+			err = PTR_ERR(state);
 			goto out;
 		}
-
-		rq->engine->default_state = i915_gem_object_get(state->obj);
-		i915_gem_object_unpin_map(state->obj);
+		rq->engine->default_state = state;
 	}
 
 out:
@@ -576,6 +533,8 @@ int intel_gt_init(struct intel_gt *gt)
 	 */
 	intel_uncore_forcewake_get(gt->uncore, FORCEWAKE_ALL);
 
+	intel_gt_init_clock_frequency(gt);
+
 	err = intel_gt_init_scratch(gt, IS_GEN(gt->i915, 2) ? SZ_256K : SZ_4K);
 	if (err)
 		goto out_fw;
@@ -635,8 +594,7 @@ void intel_gt_driver_remove(struct intel_gt *gt)
 {
 	__intel_gt_disable(gt);
 
-	intel_uc_fini_hw(&gt->uc);
-	intel_uc_fini(&gt->uc);
+	intel_uc_driver_remove(&gt->uc);
 
 	intel_engines_release(gt);
 }
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c b/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
new file mode 100644
index 000000000000..999079686846
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#include "i915_drv.h"
+#include "intel_gt.h"
+#include "intel_gt_clock_utils.h"
+
+#define MHZ_12   12000000 /* 12MHz (24MHz/2), 83.333ns */
+#define MHZ_12_5 12500000 /* 12.5MHz (25MHz/2), 80ns */
+#define MHZ_19_2 19200000 /* 19.2MHz, 52.083ns */
+
+static u32 read_clock_frequency(const struct intel_gt *gt)
+{
+	if (INTEL_GEN(gt->i915) >= 11) {
+		u32 config;
+
+		config = intel_uncore_read(gt->uncore, RPM_CONFIG0);
+		config &= GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK;
+		config >>= GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_SHIFT;
+
+		switch (config) {
+		case 0: return MHZ_12;
+		case 1:
+		case 2: return MHZ_19_2;
+		default:
+		case 3: return MHZ_12_5;
+		}
+	} else if (INTEL_GEN(gt->i915) >= 9) {
+		if (IS_GEN9_LP(gt->i915))
+			return MHZ_19_2;
+		else
+			return MHZ_12;
+	} else {
+		return MHZ_12_5;
+	}
+}
+
+void intel_gt_init_clock_frequency(struct intel_gt *gt)
+{
+	/*
+	 * Note that on gen11+, the clock frequency may be reconfigured.
+	 * We do not, and we assume nobody else does.
+	 */
+	gt->clock_frequency = read_clock_frequency(gt);
+	GT_TRACE(gt,
+		 "Using clock frequency: %dkHz\n",
+		 gt->clock_frequency / 1000);
+}
+
+#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)
+void intel_gt_check_clock_frequency(const struct intel_gt *gt)
+{
+	if (gt->clock_frequency != read_clock_frequency(gt)) {
+		dev_err(gt->i915->drm.dev,
+			"GT clock frequency changed, was %uHz, now %uHz!\n",
+			gt->clock_frequency,
+			read_clock_frequency(gt));
+	}
+}
+#endif
+
+static u64 div_u64_roundup(u64 nom, u32 den)
+{
+	return div_u64(nom + den - 1, den);
+}
+
+u32 intel_gt_clock_interval_to_ns(const struct intel_gt *gt, u32 count)
+{
+	return div_u64_roundup(mul_u32_u32(count, 1000 * 1000 * 1000),
+			       gt->clock_frequency);
+}
+
+u32 intel_gt_pm_interval_to_ns(const struct intel_gt *gt, u32 count)
+{
+	return intel_gt_clock_interval_to_ns(gt, 16 * count);
+}
+
+u32 intel_gt_ns_to_clock_interval(const struct intel_gt *gt, u32 ns)
+{
+	return div_u64_roundup(mul_u32_u32(gt->clock_frequency, ns),
+			       1000 * 1000 * 1000);
+}
+
+u32 intel_gt_ns_to_pm_interval(const struct intel_gt *gt, u32 ns)
+{
+	u32 val;
+
+	/*
+	 * Make these a multiple of magic 25 to avoid SNB (eg. Dell XPS
+	 * 8300) freezing up around GPU hangs. Looks as if even
+	 * scheduling/timer interrupts start misbehaving if the RPS
+	 * EI/thresholds are "bad", leading to a very sluggish or even
+	 * frozen machine.
+	 */
+	val = DIV_ROUND_UP(intel_gt_ns_to_clock_interval(gt, ns), 16);
+	if (IS_GEN(gt->i915, 6))
+		val = roundup(val, 25);
+
+	return val;
+}
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.h b/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.h
new file mode 100644
index 000000000000..f793c89f2cbd
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef __INTEL_GT_CLOCK_UTILS_H__
+#define __INTEL_GT_CLOCK_UTILS_H__
+
+#include <linux/types.h>
+
+struct intel_gt;
+
+void intel_gt_init_clock_frequency(struct intel_gt *gt);
+
+#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)
+void intel_gt_check_clock_frequency(const struct intel_gt *gt);
+#else
+static inline void intel_gt_check_clock_frequency(const struct intel_gt *gt) {}
+#endif
+
+u32 intel_gt_clock_interval_to_ns(const struct intel_gt *gt, u32 count);
+u32 intel_gt_pm_interval_to_ns(const struct intel_gt *gt, u32 count);
+
+u32 intel_gt_ns_to_clock_interval(const struct intel_gt *gt, u32 ns);
+u32 intel_gt_ns_to_pm_interval(const struct intel_gt *gt, u32 ns);
+
+#endif /* __INTEL_GT_CLOCK_UTILS_H__ */
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_irq.c b/drivers/gpu/drm/i915/gt/intel_gt_irq.c
index f0e7fd95165a..0cc7dd54f4f9 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_irq.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt_irq.c
@@ -39,6 +39,15 @@ cs_irq_handler(struct intel_engine_cs *engine, u32 iir)
 		}
 	}
 
+	if (iir & GT_WAIT_SEMAPHORE_INTERRUPT) {
+		WRITE_ONCE(engine->execlists.yield,
+			   ENGINE_READ_FW(engine, RING_EXECLIST_STATUS_HI));
+		ENGINE_TRACE(engine, "semaphore yield: %08x\n",
+			     engine->execlists.yield);
+		if (del_timer(&engine->execlists.timer))
+			tasklet = true;
+	}
+
 	if (iir & GT_CONTEXT_SWITCH_INTERRUPT)
 		tasklet = true;
 
@@ -228,7 +237,8 @@ void gen11_gt_irq_postinstall(struct intel_gt *gt)
 	const u32 irqs =
 		GT_CS_MASTER_ERROR_INTERRUPT |
 		GT_RENDER_USER_INTERRUPT |
-		GT_CONTEXT_SWITCH_INTERRUPT;
+		GT_CONTEXT_SWITCH_INTERRUPT |
+		GT_WAIT_SEMAPHORE_INTERRUPT;
 	struct intel_uncore *uncore = gt->uncore;
 	const u32 dmask = irqs << 16 | irqs;
 	const u32 smask = irqs << 16;
@@ -366,7 +376,8 @@ void gen8_gt_irq_postinstall(struct intel_gt *gt)
 	const u32 irqs =
 		GT_CS_MASTER_ERROR_INTERRUPT |
 		GT_RENDER_USER_INTERRUPT |
-		GT_CONTEXT_SWITCH_INTERRUPT;
+		GT_CONTEXT_SWITCH_INTERRUPT |
+		GT_WAIT_SEMAPHORE_INTERRUPT;
 	const u32 gt_interrupts[] = {
 		irqs << GEN8_RCS_IRQ_SHIFT | irqs << GEN8_BCS_IRQ_SHIFT,
 		irqs << GEN8_VCS0_IRQ_SHIFT | irqs << GEN8_VCS1_IRQ_SHIFT,
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_pm.c b/drivers/gpu/drm/i915/gt/intel_gt_pm.c
index 8b653c0f5e5f..5097786f4375 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_pm.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt_pm.c
@@ -12,6 +12,7 @@
 #include "intel_context.h"
 #include "intel_engine_pm.h"
 #include "intel_gt.h"
+#include "intel_gt_clock_utils.h"
 #include "intel_gt_pm.h"
 #include "intel_gt_requests.h"
 #include "intel_llc.h"
@@ -138,6 +139,8 @@ static void gt_sanitize(struct intel_gt *gt, bool force)
 	wakeref = intel_runtime_pm_get(gt->uncore->rpm);
 	intel_uncore_forcewake_get(gt->uncore, FORCEWAKE_ALL);
 
+	intel_gt_check_clock_frequency(gt);
+
 	/*
 	 * As we have just resumed the machine and woken the device up from
 	 * deep PCI sleep (presumably D3_cold), assume the HW has been reset
@@ -147,6 +150,10 @@ static void gt_sanitize(struct intel_gt *gt, bool force)
 	if (intel_gt_is_wedged(gt))
 		intel_gt_unset_wedged(gt);
 
+	for_each_engine(engine, gt, id)
+		if (engine->sanitize)
+			engine->sanitize(engine);
+
 	intel_uc_sanitize(&gt->uc);
 
 	for_each_engine(engine, gt, id)
@@ -191,11 +198,12 @@ int intel_gt_resume(struct intel_gt *gt)
 	 * Only the kernel contexts should remain pinned over suspend,
 	 * allowing us to fixup the user contexts on their first pin.
 	 */
+	gt_sanitize(gt, true);
+
 	intel_gt_pm_get(gt);
 
 	intel_uncore_forcewake_get(gt->uncore, FORCEWAKE_ALL);
 	intel_rc6_sanitize(&gt->rc6);
-	gt_sanitize(gt, true);
 	if (intel_gt_is_wedged(gt)) {
 		err = -EIO;
 		goto out_fw;
@@ -204,7 +212,7 @@ int intel_gt_resume(struct intel_gt *gt)
 	/* Only when the HW is re-initialised, can we replay the requests */
 	err = intel_gt_init_hw(gt);
 	if (err) {
-		dev_err(gt->i915->drm.dev,
+		drm_err(&gt->i915->drm,
 			"Failed to initialize GPU, declaring it wedged!\n");
 		goto err_wedged;
 	}
@@ -220,7 +228,7 @@ int intel_gt_resume(struct intel_gt *gt)
 
 		intel_engine_pm_put(engine);
 		if (err) {
-			dev_err(gt->i915->drm.dev,
+			drm_err(&gt->i915->drm,
 				"Failed to restart %s (%d)\n",
 				engine->name, err);
 			goto err_wedged;
@@ -324,6 +332,7 @@ int intel_gt_runtime_resume(struct intel_gt *gt)
 {
 	GT_TRACE(gt, "\n");
 	intel_gt_init_swizzling(gt);
+	intel_ggtt_restore_fences(gt->ggtt);
 
 	return intel_uc_runtime_resume(&gt->uc);
 }
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_requests.c b/drivers/gpu/drm/i915/gt/intel_gt_requests.c
index 24c99d0838af..16ff47c83bd5 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_requests.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt_requests.c
@@ -26,6 +26,11 @@ static bool retire_requests(struct intel_timeline *tl)
 	return !i915_active_fence_isset(&tl->last_request);
 }
 
+static bool engine_active(const struct intel_engine_cs *engine)
+{
+	return !list_empty(&engine->kernel_context->timeline->requests);
+}
+
 static bool flush_submission(struct intel_gt *gt)
 {
 	struct intel_engine_cs *engine;
@@ -37,8 +42,13 @@ static bool flush_submission(struct intel_gt *gt)
 
 	for_each_engine(engine, gt, id) {
 		intel_engine_flush_submission(engine);
-		active |= flush_work(&engine->retire_work);
-		active |= flush_work(&engine->wakeref.work);
+
+		/* Flush the background retirement and idle barriers */
+		flush_work(&engine->retire_work);
+		flush_delayed_work(&engine->wakeref.work);
+
+		/* Is the idle barrier still outstanding? */
+		active |= engine_active(engine);
 	}
 
 	return active;
@@ -162,7 +172,7 @@ long intel_gt_retire_requests_timeout(struct intel_gt *gt, long timeout)
 			}
 		}
 
-		if (!retire_requests(tl) || flush_submission(gt))
+		if (!retire_requests(tl))
 			active_count++;
 		mutex_unlock(&tl->mutex);
 
@@ -173,7 +183,6 @@ out_active:	spin_lock(&timelines->lock);
 		if (atomic_dec_and_test(&tl->active_count))
 			list_del(&tl->link);
 
-
 		/* Defer the final release to after the spinlock */
 		if (refcount_dec_and_test(&tl->kref.refcount)) {
 			GEM_BUG_ON(atomic_read(&tl->active_count));
@@ -185,6 +194,9 @@ out_active:	spin_lock(&timelines->lock);
 	list_for_each_entry_safe(tl, tn, &free, link)
 		__intel_timeline_free(&tl->kref);
 
+	if (flush_submission(gt)) /* Wait, there's more! */
+		active_count++;
+
 	return active_count ? timeout : 0;
 }
 
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_types.h b/drivers/gpu/drm/i915/gt/intel_gt_types.h
index 96890dd12b5f..d02ccb735e24 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_types.h
+++ b/drivers/gpu/drm/i915/gt/intel_gt_types.h
@@ -61,6 +61,7 @@ struct intel_gt {
 	struct list_head closed_vma;
 	spinlock_t closed_lock; /* guards the list of closed_vma */
 
+	ktime_t last_init_time;
 	struct intel_reset reset;
 
 	/**
@@ -72,14 +73,12 @@ struct intel_gt {
 	 */
 	intel_wakeref_t awake;
 
+	u32 clock_frequency;
+
 	struct intel_llc llc;
 	struct intel_rc6 rc6;
 	struct intel_rps rps;
 
-	ktime_t last_init_time;
-
-	struct i915_vma *scratch;
-
 	spinlock_t irq_lock;
 	u32 gt_imr;
 	u32 pm_ier;
@@ -97,6 +96,8 @@ struct intel_gt {
 	 * Reserved for exclusive use by the kernel.
 	 */
 	struct i915_address_space *vm;
+
+	struct i915_vma *scratch;
 };
 
 enum intel_gt_scratch_field {
diff --git a/drivers/gpu/drm/i915/gt/intel_gtt.h b/drivers/gpu/drm/i915/gt/intel_gtt.h
index b3116fe8d180..d93ebdf3fa0e 100644
--- a/drivers/gpu/drm/i915/gt/intel_gtt.h
+++ b/drivers/gpu/drm/i915/gt/intel_gtt.h
@@ -26,7 +26,6 @@
 #include <drm/drm_mm.h>
 
 #include "gt/intel_reset.h"
-#include "i915_gem_fence_reg.h"
 #include "i915_selftest.h"
 #include "i915_vma_types.h"
 
@@ -135,6 +134,8 @@ typedef u64 gen8_pte_t;
 #define GEN8_PDE_IPS_64K BIT(11)
 #define GEN8_PDE_PS_2M   BIT(7)
 
+struct i915_fence_reg;
+
 #define for_each_sgt_daddr(__dp, __iter, __sgt) \
 	__for_each_sgt_daddr(__dp, __iter, __sgt, I915_GTT_PAGE_SIZE)
 
@@ -333,7 +334,7 @@ struct i915_ggtt {
 	u32 pin_bias;
 
 	unsigned int num_fences;
-	struct i915_fence_reg fence_regs[I915_MAX_NUM_FENCES];
+	struct i915_fence_reg *fence_regs;
 	struct list_head fence_list;
 
 	/**
diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c
index 683014e7bc51..11557255aa65 100644
--- a/drivers/gpu/drm/i915/gt/intel_lrc.c
+++ b/drivers/gpu/drm/i915/gt/intel_lrc.c
@@ -147,6 +147,7 @@
 #include "intel_reset.h"
 #include "intel_ring.h"
 #include "intel_workarounds.h"
+#include "shmem_utils.h"
 
 #define RING_EXECLIST_QFULL		(1 << 0x2)
 #define RING_EXECLIST1_VALID		(1 << 0x3)
@@ -216,7 +217,7 @@ struct virtual_engine {
 
 	/* And finally, which physical engines this virtual engine maps onto. */
 	unsigned int num_siblings;
-	struct intel_engine_cs *siblings[0];
+	struct intel_engine_cs *siblings[];
 };
 
 static struct virtual_engine *to_virtual_engine(struct intel_engine_cs *engine)
@@ -238,6 +239,123 @@ __execlists_update_reg_state(const struct intel_context *ce,
 			     const struct intel_engine_cs *engine,
 			     u32 head);
 
+static int lrc_ring_mi_mode(const struct intel_engine_cs *engine)
+{
+	if (INTEL_GEN(engine->i915) >= 12)
+		return 0x60;
+	else if (INTEL_GEN(engine->i915) >= 9)
+		return 0x54;
+	else if (engine->class == RENDER_CLASS)
+		return 0x58;
+	else
+		return -1;
+}
+
+static int lrc_ring_gpr0(const struct intel_engine_cs *engine)
+{
+	if (INTEL_GEN(engine->i915) >= 12)
+		return 0x74;
+	else if (INTEL_GEN(engine->i915) >= 9)
+		return 0x68;
+	else if (engine->class == RENDER_CLASS)
+		return 0xd8;
+	else
+		return -1;
+}
+
+static int lrc_ring_wa_bb_per_ctx(const struct intel_engine_cs *engine)
+{
+	if (INTEL_GEN(engine->i915) >= 12)
+		return 0x12;
+	else if (INTEL_GEN(engine->i915) >= 9 || engine->class == RENDER_CLASS)
+		return 0x18;
+	else
+		return -1;
+}
+
+static int lrc_ring_indirect_ptr(const struct intel_engine_cs *engine)
+{
+	int x;
+
+	x = lrc_ring_wa_bb_per_ctx(engine);
+	if (x < 0)
+		return x;
+
+	return x + 2;
+}
+
+static int lrc_ring_indirect_offset(const struct intel_engine_cs *engine)
+{
+	int x;
+
+	x = lrc_ring_indirect_ptr(engine);
+	if (x < 0)
+		return x;
+
+	return x + 2;
+}
+
+static int lrc_ring_cmd_buf_cctl(const struct intel_engine_cs *engine)
+{
+	if (engine->class != RENDER_CLASS)
+		return -1;
+
+	if (INTEL_GEN(engine->i915) >= 12)
+		return 0xb6;
+	else if (INTEL_GEN(engine->i915) >= 11)
+		return 0xaa;
+	else
+		return -1;
+}
+
+static u32
+lrc_ring_indirect_offset_default(const struct intel_engine_cs *engine)
+{
+	switch (INTEL_GEN(engine->i915)) {
+	default:
+		MISSING_CASE(INTEL_GEN(engine->i915));
+		fallthrough;
+	case 12:
+		return GEN12_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
+	case 11:
+		return GEN11_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
+	case 10:
+		return GEN10_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
+	case 9:
+		return GEN9_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
+	case 8:
+		return GEN8_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
+	}
+}
+
+static void
+lrc_ring_setup_indirect_ctx(u32 *regs,
+			    const struct intel_engine_cs *engine,
+			    u32 ctx_bb_ggtt_addr,
+			    u32 size)
+{
+	GEM_BUG_ON(!size);
+	GEM_BUG_ON(!IS_ALIGNED(size, CACHELINE_BYTES));
+	GEM_BUG_ON(lrc_ring_indirect_ptr(engine) == -1);
+	regs[lrc_ring_indirect_ptr(engine) + 1] =
+		ctx_bb_ggtt_addr | (size / CACHELINE_BYTES);
+
+	GEM_BUG_ON(lrc_ring_indirect_offset(engine) == -1);
+	regs[lrc_ring_indirect_offset(engine) + 1] =
+		lrc_ring_indirect_offset_default(engine) << 6;
+}
+
+static u32 intel_context_get_runtime(const struct intel_context *ce)
+{
+	/*
+	 * We can use either ppHWSP[16] which is recorded before the context
+	 * switch (and so excludes the cost of context switches) or use the
+	 * value from the context image itself, which is saved/restored earlier
+	 * and so includes the cost of the save.
+	 */
+	return READ_ONCE(ce->lrc_reg_state[CTX_TIMESTAMP]);
+}
+
 static void mark_eio(struct i915_request *rq)
 {
 	if (i915_request_completed(rq))
@@ -456,10 +574,10 @@ assert_priority_queue(const struct i915_request *prev,
  * engine info, SW context ID and SW counter need to form a unique number
  * (Context ID) per lrc.
  */
-static u64
+static u32
 lrc_descriptor(struct intel_context *ce, struct intel_engine_cs *engine)
 {
-	u64 desc;
+	u32 desc;
 
 	desc = INTEL_LEGACY_32B_CONTEXT;
 	if (i915_vm_is_4lvl(ce->vm))
@@ -470,21 +588,7 @@ lrc_descriptor(struct intel_context *ce, struct intel_engine_cs *engine)
 	if (IS_GEN(engine->i915, 8))
 		desc |= GEN8_CTX_L3LLC_COHERENT;
 
-	desc |= i915_ggtt_offset(ce->state); /* bits 12-31 */
-	/*
-	 * The following 32bits are copied into the OA reports (dword 2).
-	 * Consider updating oa_get_render_ctx_id in i915_perf.c when changing
-	 * anything below.
-	 */
-	if (INTEL_GEN(engine->i915) >= 11) {
-		desc |= (u64)engine->instance << GEN11_ENGINE_INSTANCE_SHIFT;
-								/* bits 48-53 */
-
-		desc |= (u64)engine->class << GEN11_ENGINE_CLASS_SHIFT;
-								/* bits 61-63 */
-	}
-
-	return desc;
+	return i915_ggtt_offset(ce->state) | desc;
 }
 
 static inline unsigned int dword_in_page(void *addr)
@@ -503,7 +607,7 @@ static void set_offsets(u32 *regs,
 #define REG16(x) \
 	(((x) >> 9) | BIT(7) | BUILD_BUG_ON_ZERO(x >= 0x10000)), \
 	(((x) >> 2) & 0x7f)
-#define END(x) 0, (x)
+#define END(total_state_size) 0, (total_state_size)
 {
 	const u32 base = engine->mmio_base;
 
@@ -526,7 +630,7 @@ static void set_offsets(u32 *regs,
 		if (flags & POSTED)
 			*regs |= MI_LRI_FORCE_POSTED;
 		if (INTEL_GEN(engine->i915) >= 11)
-			*regs |= MI_LRI_CS_MMIO;
+			*regs |= MI_LRI_LRM_CS_MMIO;
 		regs++;
 
 		GEM_BUG_ON(!count);
@@ -911,8 +1015,63 @@ static const u8 gen12_rcs_offsets[] = {
 	NOP(6),
 	LRI(1, 0),
 	REG(0x0c8),
+	NOP(3 + 9 + 1),
+
+	LRI(51, POSTED),
+	REG16(0x588),
+	REG16(0x588),
+	REG16(0x588),
+	REG16(0x588),
+	REG16(0x588),
+	REG16(0x588),
+	REG(0x028),
+	REG(0x09c),
+	REG(0x0c0),
+	REG(0x178),
+	REG(0x17c),
+	REG16(0x358),
+	REG(0x170),
+	REG(0x150),
+	REG(0x154),
+	REG(0x158),
+	REG16(0x41c),
+	REG16(0x600),
+	REG16(0x604),
+	REG16(0x608),
+	REG16(0x60c),
+	REG16(0x610),
+	REG16(0x614),
+	REG16(0x618),
+	REG16(0x61c),
+	REG16(0x620),
+	REG16(0x624),
+	REG16(0x628),
+	REG16(0x62c),
+	REG16(0x630),
+	REG16(0x634),
+	REG16(0x638),
+	REG16(0x63c),
+	REG16(0x640),
+	REG16(0x644),
+	REG16(0x648),
+	REG16(0x64c),
+	REG16(0x650),
+	REG16(0x654),
+	REG16(0x658),
+	REG16(0x65c),
+	REG16(0x660),
+	REG16(0x664),
+	REG16(0x668),
+	REG16(0x66c),
+	REG16(0x670),
+	REG16(0x674),
+	REG16(0x678),
+	REG16(0x67c),
+	REG(0x068),
+	REG(0x084),
+	NOP(1),
 
-	END(80)
+	END(192)
 };
 
 #undef END
@@ -1040,17 +1199,14 @@ static void intel_engine_context_in(struct intel_engine_cs *engine)
 {
 	unsigned long flags;
 
-	if (READ_ONCE(engine->stats.enabled) == 0)
+	if (atomic_add_unless(&engine->stats.active, 1, 0))
 		return;
 
 	write_seqlock_irqsave(&engine->stats.lock, flags);
-
-	if (engine->stats.enabled > 0) {
-		if (engine->stats.active++ == 0)
-			engine->stats.start = ktime_get();
-		GEM_BUG_ON(engine->stats.active == 0);
+	if (!atomic_add_unless(&engine->stats.active, 1, 0)) {
+		engine->stats.start = ktime_get();
+		atomic_inc(&engine->stats.active);
 	}
-
 	write_sequnlock_irqrestore(&engine->stats.lock, flags);
 }
 
@@ -1058,51 +1214,20 @@ static void intel_engine_context_out(struct intel_engine_cs *engine)
 {
 	unsigned long flags;
 
-	if (READ_ONCE(engine->stats.enabled) == 0)
+	GEM_BUG_ON(!atomic_read(&engine->stats.active));
+
+	if (atomic_add_unless(&engine->stats.active, -1, 1))
 		return;
 
 	write_seqlock_irqsave(&engine->stats.lock, flags);
-
-	if (engine->stats.enabled > 0) {
-		ktime_t last;
-
-		if (engine->stats.active && --engine->stats.active == 0) {
-			/*
-			 * Decrement the active context count and in case GPU
-			 * is now idle add up to the running total.
-			 */
-			last = ktime_sub(ktime_get(), engine->stats.start);
-
-			engine->stats.total = ktime_add(engine->stats.total,
-							last);
-		} else if (engine->stats.active == 0) {
-			/*
-			 * After turning on engine stats, context out might be
-			 * the first event in which case we account from the
-			 * time stats gathering was turned on.
-			 */
-			last = ktime_sub(ktime_get(), engine->stats.enabled_at);
-
-			engine->stats.total = ktime_add(engine->stats.total,
-							last);
-		}
+	if (atomic_dec_and_test(&engine->stats.active)) {
+		engine->stats.total =
+			ktime_add(engine->stats.total,
+				  ktime_sub(ktime_get(), engine->stats.start));
 	}
-
 	write_sequnlock_irqrestore(&engine->stats.lock, flags);
 }
 
-static int lrc_ring_mi_mode(const struct intel_engine_cs *engine)
-{
-	if (INTEL_GEN(engine->i915) >= 12)
-		return 0x60;
-	else if (INTEL_GEN(engine->i915) >= 9)
-		return 0x54;
-	else if (engine->class == RENDER_CLASS)
-		return 0x58;
-	else
-		return -1;
-}
-
 static void
 execlists_check_context(const struct intel_context *ce,
 			const struct intel_engine_cs *engine)
@@ -1150,10 +1275,11 @@ static void restore_default_state(struct intel_context *ce,
 
 	if (engine->pinned_default_state)
 		memcpy(regs, /* skip restoring the vanilla PPHWSP */
-		       engine->pinned_default_state + LRC_STATE_PN * PAGE_SIZE,
+		       engine->pinned_default_state + LRC_STATE_OFFSET,
 		       engine->context_size - PAGE_SIZE);
 
 	execlists_init_reg_state(regs, ce, engine, ce->ring, false);
+	ce->runtime.last = intel_context_get_runtime(ce);
 }
 
 static void reset_active(struct i915_request *rq,
@@ -1192,18 +1318,7 @@ static void reset_active(struct i915_request *rq,
 	__execlists_update_reg_state(ce, engine, head);
 
 	/* We've switched away, so this should be a no-op, but intent matters */
-	ce->lrc_desc |= CTX_DESC_FORCE_RESTORE;
-}
-
-static u32 intel_context_get_runtime(const struct intel_context *ce)
-{
-	/*
-	 * We can use either ppHWSP[16] which is recorded before the context
-	 * switch (and so excludes the cost of context switches) or use the
-	 * value from the context image itself, which is saved/restored earlier
-	 * and so includes the cost of the save.
-	 */
-	return READ_ONCE(ce->lrc_reg_state[CTX_TIMESTAMP]);
+	ce->lrc.desc |= CTX_DESC_FORCE_RESTORE;
 }
 
 static void st_update_runtime_underflow(struct intel_context *ce, s32 dt)
@@ -1251,18 +1366,23 @@ __execlists_schedule_in(struct i915_request *rq)
 	if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM))
 		execlists_check_context(ce, engine);
 
-	ce->lrc_desc &= ~GENMASK_ULL(47, 37);
 	if (ce->tag) {
 		/* Use a fixed tag for OA and friends */
-		ce->lrc_desc |= (u64)ce->tag << 32;
+		GEM_BUG_ON(ce->tag <= BITS_PER_LONG);
+		ce->lrc.ccid = ce->tag;
 	} else {
 		/* We don't need a strict matching tag, just different values */
-		ce->lrc_desc |=
-			(u64)(++engine->context_tag % NUM_CONTEXT_TAG) <<
-			GEN11_SW_CTX_ID_SHIFT;
-		BUILD_BUG_ON(NUM_CONTEXT_TAG > GEN12_MAX_CONTEXT_HW_ID);
+		unsigned int tag = ffs(engine->context_tag);
+
+		GEM_BUG_ON(tag == 0 || tag >= BITS_PER_LONG);
+		clear_bit(tag - 1, &engine->context_tag);
+		ce->lrc.ccid = tag << (GEN11_SW_CTX_ID_SHIFT - 32);
+
+		BUILD_BUG_ON(BITS_PER_LONG > GEN12_MAX_CONTEXT_HW_ID);
 	}
 
+	ce->lrc.ccid |= engine->execlists.ccid;
+
 	__intel_gt_pm_get(engine->gt);
 	execlists_context_status_change(rq, INTEL_CONTEXT_SCHEDULE_IN);
 	intel_engine_context_in(engine);
@@ -1302,7 +1422,8 @@ static void kick_siblings(struct i915_request *rq, struct intel_context *ce)
 
 static inline void
 __execlists_schedule_out(struct i915_request *rq,
-			 struct intel_engine_cs * const engine)
+			 struct intel_engine_cs * const engine,
+			 unsigned int ccid)
 {
 	struct intel_context * const ce = rq->context;
 
@@ -1320,6 +1441,14 @@ __execlists_schedule_out(struct i915_request *rq,
 	    i915_request_completed(rq))
 		intel_engine_add_retire(engine, ce->timeline);
 
+	ccid >>= GEN11_SW_CTX_ID_SHIFT - 32;
+	ccid &= GEN12_MAX_CONTEXT_HW_ID;
+	if (ccid < BITS_PER_LONG) {
+		GEM_BUG_ON(ccid == 0);
+		GEM_BUG_ON(test_bit(ccid - 1, &engine->context_tag));
+		set_bit(ccid - 1, &engine->context_tag);
+	}
+
 	intel_context_update_runtime(ce);
 	intel_engine_context_out(engine);
 	execlists_context_status_change(rq, INTEL_CONTEXT_SCHEDULE_OUT);
@@ -1345,15 +1474,17 @@ execlists_schedule_out(struct i915_request *rq)
 {
 	struct intel_context * const ce = rq->context;
 	struct intel_engine_cs *cur, *old;
+	u32 ccid;
 
 	trace_i915_request_out(rq);
 
+	ccid = rq->context->lrc.ccid;
 	old = READ_ONCE(ce->inflight);
 	do
 		cur = ptr_unmask_bits(old, 2) ? ptr_dec(old) : NULL;
 	while (!try_cmpxchg(&ce->inflight, &old, cur));
 	if (!cur)
-		__execlists_schedule_out(rq, old);
+		__execlists_schedule_out(rq, old, ccid);
 
 	i915_request_put(rq);
 }
@@ -1361,7 +1492,7 @@ execlists_schedule_out(struct i915_request *rq)
 static u64 execlists_update_context(struct i915_request *rq)
 {
 	struct intel_context *ce = rq->context;
-	u64 desc = ce->lrc_desc;
+	u64 desc = ce->lrc.desc;
 	u32 tail, prev;
 
 	/*
@@ -1400,7 +1531,7 @@ static u64 execlists_update_context(struct i915_request *rq)
 	 */
 	wmb();
 
-	ce->lrc_desc &= ~CTX_DESC_FORCE_RESTORE;
+	ce->lrc.desc &= ~CTX_DESC_FORCE_RESTORE;
 	return desc;
 }
 
@@ -1415,6 +1546,24 @@ static inline void write_desc(struct intel_engine_execlists *execlists, u64 desc
 	}
 }
 
+static __maybe_unused char *
+dump_port(char *buf, int buflen, const char *prefix, struct i915_request *rq)
+{
+	if (!rq)
+		return "";
+
+	snprintf(buf, buflen, "%sccid:%x %llx:%lld%s prio %d",
+		 prefix,
+		 rq->context->lrc.ccid,
+		 rq->fence.context, rq->fence.seqno,
+		 i915_request_completed(rq) ? "!" :
+		 i915_request_started(rq) ? "*" :
+		 "",
+		 rq_prio(rq));
+
+	return buf;
+}
+
 static __maybe_unused void
 trace_ports(const struct intel_engine_execlists *execlists,
 	    const char *msg,
@@ -1422,18 +1571,14 @@ trace_ports(const struct intel_engine_execlists *execlists,
 {
 	const struct intel_engine_cs *engine =
 		container_of(execlists, typeof(*engine), execlists);
+	char __maybe_unused p0[40], p1[40];
 
 	if (!ports[0])
 		return;
 
-	ENGINE_TRACE(engine, "%s { %llx:%lld%s, %llx:%lld }\n", msg,
-		     ports[0]->fence.context,
-		     ports[0]->fence.seqno,
-		     i915_request_completed(ports[0]) ? "!" :
-		     i915_request_started(ports[0]) ? "*" :
-		     "",
-		     ports[1] ? ports[1]->fence.context : 0,
-		     ports[1] ? ports[1]->fence.seqno : 0);
+	ENGINE_TRACE(engine, "%s { %s%s }\n", msg,
+		     dump_port(p0, sizeof(p0), "", ports[0]),
+		     dump_port(p1, sizeof(p1), ", ", ports[1]));
 }
 
 static inline bool
@@ -1446,9 +1591,12 @@ static __maybe_unused bool
 assert_pending_valid(const struct intel_engine_execlists *execlists,
 		     const char *msg)
 {
+	struct intel_engine_cs *engine =
+		container_of(execlists, typeof(*engine), execlists);
 	struct i915_request * const *port, *rq;
 	struct intel_context *ce = NULL;
 	bool sentinel = false;
+	u32 ccid = -1;
 
 	trace_ports(execlists, msg, execlists->pending);
 
@@ -1457,13 +1605,14 @@ assert_pending_valid(const struct intel_engine_execlists *execlists,
 		return true;
 
 	if (!execlists->pending[0]) {
-		GEM_TRACE_ERR("Nothing pending for promotion!\n");
+		GEM_TRACE_ERR("%s: Nothing pending for promotion!\n",
+			      engine->name);
 		return false;
 	}
 
 	if (execlists->pending[execlists_num_ports(execlists)]) {
-		GEM_TRACE_ERR("Excess pending[%d] for promotion!\n",
-			      execlists_num_ports(execlists));
+		GEM_TRACE_ERR("%s: Excess pending[%d] for promotion!\n",
+			      engine->name, execlists_num_ports(execlists));
 		return false;
 	}
 
@@ -1475,20 +1624,31 @@ assert_pending_valid(const struct intel_engine_execlists *execlists,
 		GEM_BUG_ON(!i915_request_is_active(rq));
 
 		if (ce == rq->context) {
-			GEM_TRACE_ERR("Dup context:%llx in pending[%zd]\n",
+			GEM_TRACE_ERR("%s: Dup context:%llx in pending[%zd]\n",
+				      engine->name,
 				      ce->timeline->fence_context,
 				      port - execlists->pending);
 			return false;
 		}
 		ce = rq->context;
 
+		if (ccid == ce->lrc.ccid) {
+			GEM_TRACE_ERR("%s: Dup ccid:%x context:%llx in pending[%zd]\n",
+				      engine->name,
+				      ccid, ce->timeline->fence_context,
+				      port - execlists->pending);
+			return false;
+		}
+		ccid = ce->lrc.ccid;
+
 		/*
 		 * Sentinels are supposed to be lonely so they flush the
 		 * current exection off the HW. Check that they are the
 		 * only request in the pending submission.
 		 */
 		if (sentinel) {
-			GEM_TRACE_ERR("context:%llx after sentinel in pending[%zd]\n",
+			GEM_TRACE_ERR("%s: context:%llx after sentinel in pending[%zd]\n",
+				      engine->name,
 				      ce->timeline->fence_context,
 				      port - execlists->pending);
 			return false;
@@ -1496,7 +1656,8 @@ assert_pending_valid(const struct intel_engine_execlists *execlists,
 
 		sentinel = i915_request_has_sentinel(rq);
 		if (sentinel && port != execlists->pending) {
-			GEM_TRACE_ERR("sentinel context:%llx not in prime position[%zd]\n",
+			GEM_TRACE_ERR("%s: sentinel context:%llx not in prime position[%zd]\n",
+				      engine->name,
 				      ce->timeline->fence_context,
 				      port - execlists->pending);
 			return false;
@@ -1511,7 +1672,8 @@ assert_pending_valid(const struct intel_engine_execlists *execlists,
 
 		if (i915_active_is_idle(&ce->active) &&
 		    !intel_context_is_barrier(ce)) {
-			GEM_TRACE_ERR("Inactive context:%llx in pending[%zd]\n",
+			GEM_TRACE_ERR("%s: Inactive context:%llx in pending[%zd]\n",
+				      engine->name,
 				      ce->timeline->fence_context,
 				      port - execlists->pending);
 			ok = false;
@@ -1519,7 +1681,8 @@ assert_pending_valid(const struct intel_engine_execlists *execlists,
 		}
 
 		if (!i915_vma_is_pinned(ce->state)) {
-			GEM_TRACE_ERR("Unpinned context:%llx in pending[%zd]\n",
+			GEM_TRACE_ERR("%s: Unpinned context:%llx in pending[%zd]\n",
+				      engine->name,
 				      ce->timeline->fence_context,
 				      port - execlists->pending);
 			ok = false;
@@ -1527,7 +1690,8 @@ assert_pending_valid(const struct intel_engine_execlists *execlists,
 		}
 
 		if (!i915_vma_is_pinned(ce->ring->vma)) {
-			GEM_TRACE_ERR("Unpinned ring:%llx in pending[%zd]\n",
+			GEM_TRACE_ERR("%s: Unpinned ring:%llx in pending[%zd]\n",
+				      engine->name,
 				      ce->timeline->fence_context,
 				      port - execlists->pending);
 			ok = false;
@@ -1754,7 +1918,8 @@ static void defer_active(struct intel_engine_cs *engine)
 }
 
 static bool
-need_timeslice(struct intel_engine_cs *engine, const struct i915_request *rq)
+need_timeslice(const struct intel_engine_cs *engine,
+	       const struct i915_request *rq)
 {
 	int hint;
 
@@ -1768,6 +1933,32 @@ need_timeslice(struct intel_engine_cs *engine, const struct i915_request *rq)
 	return hint >= effective_prio(rq);
 }
 
+static bool
+timeslice_yield(const struct intel_engine_execlists *el,
+		const struct i915_request *rq)
+{
+	/*
+	 * Once bitten, forever smitten!
+	 *
+	 * If the active context ever busy-waited on a semaphore,
+	 * it will be treated as a hog until the end of its timeslice (i.e.
+	 * until it is scheduled out and replaced by a new submission,
+	 * possibly even its own lite-restore). The HW only sends an interrupt
+	 * on the first miss, and we do know if that semaphore has been
+	 * signaled, or even if it is now stuck on another semaphore. Play
+	 * safe, yield if it might be stuck -- it will be given a fresh
+	 * timeslice in the near future.
+	 */
+	return rq->context->lrc.ccid == READ_ONCE(el->yield);
+}
+
+static bool
+timeslice_expired(const struct intel_engine_execlists *el,
+		  const struct i915_request *rq)
+{
+	return timer_expired(&el->timer) || timeslice_yield(el, rq);
+}
+
 static int
 switch_prio(struct intel_engine_cs *engine, const struct i915_request *rq)
 {
@@ -1783,8 +1974,7 @@ timeslice(const struct intel_engine_cs *engine)
 	return READ_ONCE(engine->props.timeslice_duration_ms);
 }
 
-static unsigned long
-active_timeslice(const struct intel_engine_cs *engine)
+static unsigned long active_timeslice(const struct intel_engine_cs *engine)
 {
 	const struct intel_engine_execlists *execlists = &engine->execlists;
 	const struct i915_request *rq = *execlists->active;
@@ -1800,16 +1990,25 @@ active_timeslice(const struct intel_engine_cs *engine)
 
 static void set_timeslice(struct intel_engine_cs *engine)
 {
+	unsigned long duration;
+
 	if (!intel_engine_has_timeslices(engine))
 		return;
 
-	set_timer_ms(&engine->execlists.timer, active_timeslice(engine));
+	duration = active_timeslice(engine);
+	ENGINE_TRACE(engine, "bump timeslicing, interval:%lu", duration);
+
+	set_timer_ms(&engine->execlists.timer, duration);
 }
 
 static void start_timeslice(struct intel_engine_cs *engine)
 {
 	struct intel_engine_execlists *execlists = &engine->execlists;
-	int prio = queue_prio(execlists);
+	const int prio = queue_prio(execlists);
+	unsigned long duration;
+
+	if (!intel_engine_has_timeslices(engine))
+		return;
 
 	WRITE_ONCE(execlists->switch_priority_hint, prio);
 	if (prio == INT_MIN)
@@ -1818,7 +2017,12 @@ static void start_timeslice(struct intel_engine_cs *engine)
 	if (timer_pending(&execlists->timer))
 		return;
 
-	set_timer_ms(&execlists->timer, timeslice(engine));
+	duration = timeslice(engine);
+	ENGINE_TRACE(engine,
+		     "start timeslicing, prio:%d, interval:%lu",
+		     prio, duration);
+
+	set_timer_ms(&execlists->timer, duration);
 }
 
 static void record_preemption(struct intel_engine_execlists *execlists)
@@ -1915,11 +2119,26 @@ static void execlists_dequeue(struct intel_engine_cs *engine)
 	 * of trouble.
 	 */
 	active = READ_ONCE(execlists->active);
-	while ((last = *active) && i915_request_completed(last))
-		active++;
 
-	if (last) {
+	/*
+	 * In theory we can skip over completed contexts that have not
+	 * yet been processed by events (as those events are in flight):
+	 *
+	 * while ((last = *active) && i915_request_completed(last))
+	 *	active++;
+	 *
+	 * However, the GPU cannot handle this as it will ultimately
+	 * find itself trying to jump back into a context it has just
+	 * completed and barf.
+	 */
+
+	if ((last = *active)) {
 		if (need_preempt(engine, last, rb)) {
+			if (i915_request_completed(last)) {
+				tasklet_hi_schedule(&execlists->tasklet);
+				return;
+			}
+
 			ENGINE_TRACE(engine,
 				     "preempting last=%llx:%lld, prio=%d, hint=%d\n",
 				     last->fence.context,
@@ -1946,13 +2165,19 @@ static void execlists_dequeue(struct intel_engine_cs *engine)
 
 			last = NULL;
 		} else if (need_timeslice(engine, last) &&
-			   timer_expired(&engine->execlists.timer)) {
+			   timeslice_expired(execlists, last)) {
+			if (i915_request_completed(last)) {
+				tasklet_hi_schedule(&execlists->tasklet);
+				return;
+			}
+
 			ENGINE_TRACE(engine,
-				     "expired last=%llx:%lld, prio=%d, hint=%d\n",
+				     "expired last=%llx:%lld, prio=%d, hint=%d, yield?=%s\n",
 				     last->fence.context,
 				     last->fence.seqno,
 				     last->sched.attr.priority,
-				     execlists->queue_priority_hint);
+				     execlists->queue_priority_hint,
+				     yesno(timeslice_yield(execlists, last)));
 
 			ring_set_paused(engine, 1);
 			defer_active(engine);
@@ -2213,8 +2438,9 @@ static void execlists_dequeue(struct intel_engine_cs *engine)
 		}
 		clear_ports(port + 1, last_port - port);
 
-		execlists_submit_ports(engine);
+		WRITE_ONCE(execlists->yield, -1);
 		set_preempt_timeout(engine, *active);
+		execlists_submit_ports(engine);
 	} else {
 skip_submit:
 		ring_set_paused(engine, 0);
@@ -2384,8 +2610,6 @@ static void process_csb(struct intel_engine_cs *engine)
 		if (promote) {
 			struct i915_request * const *old = execlists->active;
 
-			GEM_BUG_ON(!assert_pending_valid(execlists, "promote"));
-
 			ring_set_paused(engine, 0);
 
 			/* Point active to the new ELSP; prevent overwriting */
@@ -2398,6 +2622,7 @@ static void process_csb(struct intel_engine_cs *engine)
 				execlists_schedule_out(*old++);
 
 			/* switch pending to inflight */
+			GEM_BUG_ON(!assert_pending_valid(execlists, "promote"));
 			memcpy(execlists->inflight,
 			       execlists->pending,
 			       execlists_num_ports(execlists) *
@@ -2416,16 +2641,20 @@ static void process_csb(struct intel_engine_cs *engine)
 			 * We rely on the hardware being strongly
 			 * ordered, that the breadcrumb write is
 			 * coherent (visible from the CPU) before the
-			 * user interrupt and CSB is processed.
+			 * user interrupt is processed. One might assume
+			 * that the breadcrumb write being before the
+			 * user interrupt and the CS event for the context
+			 * switch would therefore be before the CS event
+			 * itself...
 			 */
 			if (GEM_SHOW_DEBUG() &&
-			    !i915_request_completed(*execlists->active) &&
-			    !reset_in_progress(execlists)) {
-				struct i915_request *rq __maybe_unused =
-					*execlists->active;
+			    !i915_request_completed(*execlists->active)) {
+				struct i915_request *rq = *execlists->active;
 				const u32 *regs __maybe_unused =
 					rq->context->lrc_reg_state;
 
+				ENGINE_TRACE(engine,
+					     "context completed before request!\n");
 				ENGINE_TRACE(engine,
 					     "ring:{start:0x%08x, head:%04x, tail:%04x, ctl:%08x, mode:%08x}\n",
 					     ENGINE_READ(engine, RING_START),
@@ -2445,8 +2674,6 @@ static void process_csb(struct intel_engine_cs *engine)
 					     regs[CTX_RING_START],
 					     regs[CTX_RING_HEAD],
 					     regs[CTX_RING_TAIL]);
-
-				GEM_BUG_ON("context completed before request");
 			}
 
 			execlists_schedule_out(*execlists->active++);
@@ -2736,6 +2963,45 @@ static struct execlists_capture *capture_regs(struct intel_engine_cs *engine)
 	return NULL;
 }
 
+static struct i915_request *
+active_context(struct intel_engine_cs *engine, u32 ccid)
+{
+	const struct intel_engine_execlists * const el = &engine->execlists;
+	struct i915_request * const *port, *rq;
+
+	/*
+	 * Use the most recent result from process_csb(), but just in case
+	 * we trigger an error (via interrupt) before the first CS event has
+	 * been written, peek at the next submission.
+	 */
+
+	for (port = el->active; (rq = *port); port++) {
+		if (rq->context->lrc.ccid == ccid) {
+			ENGINE_TRACE(engine,
+				     "ccid found at active:%zd\n",
+				     port - el->active);
+			return rq;
+		}
+	}
+
+	for (port = el->pending; (rq = *port); port++) {
+		if (rq->context->lrc.ccid == ccid) {
+			ENGINE_TRACE(engine,
+				     "ccid found at pending:%zd\n",
+				     port - el->pending);
+			return rq;
+		}
+	}
+
+	ENGINE_TRACE(engine, "ccid:%x not found\n", ccid);
+	return NULL;
+}
+
+static u32 active_ccid(struct intel_engine_cs *engine)
+{
+	return ENGINE_READ_FW(engine, RING_EXECLIST_STATUS_HI);
+}
+
 static bool execlists_capture(struct intel_engine_cs *engine)
 {
 	struct execlists_capture *cap;
@@ -2753,7 +3019,7 @@ static bool execlists_capture(struct intel_engine_cs *engine)
 		return true;
 
 	spin_lock_irq(&engine->active.lock);
-	cap->rq = execlists_active(&engine->execlists);
+	cap->rq = active_context(engine, active_ccid(engine));
 	if (cap->rq) {
 		cap->rq = active_request(cap->rq->context->timeline, cap->rq);
 		cap->rq = i915_request_get_rcu(cap->rq);
@@ -2901,10 +3167,14 @@ static void __submit_queue_imm(struct intel_engine_cs *engine)
 	if (reset_in_progress(execlists))
 		return; /* defer until we restart the engine following reset */
 
-	if (execlists->tasklet.func == execlists_submission_tasklet)
-		__execlists_submission_tasklet(engine);
-	else
-		tasklet_hi_schedule(&execlists->tasklet);
+	/* Hopefully we clear execlists->pending[] to let us through */
+	if (READ_ONCE(execlists->pending[0]) &&
+	    tasklet_trylock(&execlists->tasklet)) {
+		process_csb(engine);
+		tasklet_unlock(&execlists->tasklet);
+	}
+
+	__execlists_submission_tasklet(engine);
 }
 
 static void submit_queue(struct intel_engine_cs *engine,
@@ -2990,19 +3260,139 @@ check_redzone(const void *vaddr, const struct intel_engine_cs *engine)
 	vaddr += engine->context_size;
 
 	if (memchr_inv(vaddr, CONTEXT_REDZONE, I915_GTT_PAGE_SIZE))
-		dev_err_once(engine->i915->drm.dev,
+		drm_err_once(&engine->i915->drm,
 			     "%s context redzone overwritten!\n",
 			     engine->name);
 }
 
 static void execlists_context_unpin(struct intel_context *ce)
 {
-	check_redzone((void *)ce->lrc_reg_state - LRC_STATE_PN * PAGE_SIZE,
+	check_redzone((void *)ce->lrc_reg_state - LRC_STATE_OFFSET,
 		      ce->engine);
 
 	i915_gem_object_unpin_map(ce->state->obj);
 }
 
+static u32 *
+gen12_emit_timestamp_wa(const struct intel_context *ce, u32 *cs)
+{
+	*cs++ = MI_LOAD_REGISTER_MEM_GEN8 |
+		MI_SRM_LRM_GLOBAL_GTT |
+		MI_LRI_LRM_CS_MMIO;
+	*cs++ = i915_mmio_reg_offset(GEN8_RING_CS_GPR(0, 0));
+	*cs++ = i915_ggtt_offset(ce->state) + LRC_STATE_OFFSET +
+		CTX_TIMESTAMP * sizeof(u32);
+	*cs++ = 0;
+
+	*cs++ = MI_LOAD_REGISTER_REG |
+		MI_LRR_SOURCE_CS_MMIO |
+		MI_LRI_LRM_CS_MMIO;
+	*cs++ = i915_mmio_reg_offset(GEN8_RING_CS_GPR(0, 0));
+	*cs++ = i915_mmio_reg_offset(RING_CTX_TIMESTAMP(0));
+
+	*cs++ = MI_LOAD_REGISTER_REG |
+		MI_LRR_SOURCE_CS_MMIO |
+		MI_LRI_LRM_CS_MMIO;
+	*cs++ = i915_mmio_reg_offset(GEN8_RING_CS_GPR(0, 0));
+	*cs++ = i915_mmio_reg_offset(RING_CTX_TIMESTAMP(0));
+
+	return cs;
+}
+
+static u32 *
+gen12_emit_restore_scratch(const struct intel_context *ce, u32 *cs)
+{
+	GEM_BUG_ON(lrc_ring_gpr0(ce->engine) == -1);
+
+	*cs++ = MI_LOAD_REGISTER_MEM_GEN8 |
+		MI_SRM_LRM_GLOBAL_GTT |
+		MI_LRI_LRM_CS_MMIO;
+	*cs++ = i915_mmio_reg_offset(GEN8_RING_CS_GPR(0, 0));
+	*cs++ = i915_ggtt_offset(ce->state) + LRC_STATE_OFFSET +
+		(lrc_ring_gpr0(ce->engine) + 1) * sizeof(u32);
+	*cs++ = 0;
+
+	return cs;
+}
+
+static u32 *
+gen12_emit_cmd_buf_wa(const struct intel_context *ce, u32 *cs)
+{
+	GEM_BUG_ON(lrc_ring_cmd_buf_cctl(ce->engine) == -1);
+
+	*cs++ = MI_LOAD_REGISTER_MEM_GEN8 |
+		MI_SRM_LRM_GLOBAL_GTT |
+		MI_LRI_LRM_CS_MMIO;
+	*cs++ = i915_mmio_reg_offset(GEN8_RING_CS_GPR(0, 0));
+	*cs++ = i915_ggtt_offset(ce->state) + LRC_STATE_OFFSET +
+		(lrc_ring_cmd_buf_cctl(ce->engine) + 1) * sizeof(u32);
+	*cs++ = 0;
+
+	*cs++ = MI_LOAD_REGISTER_REG |
+		MI_LRR_SOURCE_CS_MMIO |
+		MI_LRI_LRM_CS_MMIO;
+	*cs++ = i915_mmio_reg_offset(GEN8_RING_CS_GPR(0, 0));
+	*cs++ = i915_mmio_reg_offset(RING_CMD_BUF_CCTL(0));
+
+	return cs;
+}
+
+static u32 *
+gen12_emit_indirect_ctx_rcs(const struct intel_context *ce, u32 *cs)
+{
+	cs = gen12_emit_timestamp_wa(ce, cs);
+	cs = gen12_emit_cmd_buf_wa(ce, cs);
+	cs = gen12_emit_restore_scratch(ce, cs);
+
+	return cs;
+}
+
+static u32 *
+gen12_emit_indirect_ctx_xcs(const struct intel_context *ce, u32 *cs)
+{
+	cs = gen12_emit_timestamp_wa(ce, cs);
+	cs = gen12_emit_restore_scratch(ce, cs);
+
+	return cs;
+}
+
+static inline u32 context_wa_bb_offset(const struct intel_context *ce)
+{
+	return PAGE_SIZE * ce->wa_bb_page;
+}
+
+static u32 *context_indirect_bb(const struct intel_context *ce)
+{
+	void *ptr;
+
+	GEM_BUG_ON(!ce->wa_bb_page);
+
+	ptr = ce->lrc_reg_state;
+	ptr -= LRC_STATE_OFFSET; /* back to start of context image */
+	ptr += context_wa_bb_offset(ce);
+
+	return ptr;
+}
+
+static void
+setup_indirect_ctx_bb(const struct intel_context *ce,
+		      const struct intel_engine_cs *engine,
+		      u32 *(*emit)(const struct intel_context *, u32 *))
+{
+	u32 * const start = context_indirect_bb(ce);
+	u32 *cs;
+
+	cs = emit(ce, start);
+	GEM_BUG_ON(cs - start > I915_GTT_PAGE_SIZE / sizeof(*cs));
+	while ((unsigned long)cs % CACHELINE_BYTES)
+		*cs++ = MI_NOOP;
+
+	lrc_ring_setup_indirect_ctx(ce->lrc_reg_state, engine,
+				    i915_ggtt_offset(ce->state) +
+				    context_wa_bb_offset(ce),
+				    (cs - start) * sizeof(*cs));
+}
+
 static void
 __execlists_update_reg_state(const struct intel_context *ce,
 			     const struct intel_engine_cs *engine,
@@ -3026,6 +3416,18 @@ __execlists_update_reg_state(const struct intel_context *ce,
 
 		i915_oa_init_reg_state(ce, engine);
 	}
+
+	if (ce->wa_bb_page) {
+		u32 *(*fn)(const struct intel_context *ce, u32 *cs);
+
+		fn = gen12_emit_indirect_ctx_xcs;
+		if (ce->engine->class == RENDER_CLASS)
+			fn = gen12_emit_indirect_ctx_rcs;
+
+		/* Mutually exclusive wrt to global indirect bb */
+		GEM_BUG_ON(engine->wa_ctx.indirect_ctx.size);
+		setup_indirect_ctx_bb(ce, engine, fn);
+	}
 }
 
 static int
@@ -3043,8 +3445,8 @@ __execlists_context_pin(struct intel_context *ce,
 	if (IS_ERR(vaddr))
 		return PTR_ERR(vaddr);
 
-	ce->lrc_desc = lrc_descriptor(ce, engine) | CTX_DESC_FORCE_RESTORE;
-	ce->lrc_reg_state = vaddr + LRC_STATE_PN * PAGE_SIZE;
+	ce->lrc.lrca = lrc_descriptor(ce, engine) | CTX_DESC_FORCE_RESTORE;
+	ce->lrc_reg_state = vaddr + LRC_STATE_OFFSET;
 	__execlists_update_reg_state(ce, engine, ce->ring->tail);
 
 	return 0;
@@ -3072,7 +3474,7 @@ static void execlists_context_reset(struct intel_context *ce)
 				 ce, ce->engine, ce->ring, true);
 	__execlists_update_reg_state(ce, ce->engine, ce->ring->tail);
 
-	ce->lrc_desc |= CTX_DESC_FORCE_RESTORE;
+	ce->lrc.desc |= CTX_DESC_FORCE_RESTORE;
 }
 
 static const struct intel_context_ops execlists_context_ops = {
@@ -3442,7 +3844,8 @@ static int intel_init_workaround_bb(struct intel_engine_cs *engine)
 
 	ret = lrc_setup_wa_ctx(engine);
 	if (ret) {
-		DRM_DEBUG_DRIVER("Failed to setup context WA page: %d\n", ret);
+		drm_dbg(&engine->i915->drm,
+			"Failed to setup context WA page: %d\n", ret);
 		return ret;
 	}
 
@@ -3475,6 +3878,65 @@ static int intel_init_workaround_bb(struct intel_engine_cs *engine)
 	return ret;
 }
 
+static void reset_csb_pointers(struct intel_engine_cs *engine)
+{
+	struct intel_engine_execlists * const execlists = &engine->execlists;
+	const unsigned int reset_value = execlists->csb_size - 1;
+
+	ring_set_paused(engine, 0);
+
+	/*
+	 * After a reset, the HW starts writing into CSB entry [0]. We
+	 * therefore have to set our HEAD pointer back one entry so that
+	 * the *first* entry we check is entry 0. To complicate this further,
+	 * as we don't wait for the first interrupt after reset, we have to
+	 * fake the HW write to point back to the last entry so that our
+	 * inline comparison of our cached head position against the last HW
+	 * write works even before the first interrupt.
+	 */
+	execlists->csb_head = reset_value;
+	WRITE_ONCE(*execlists->csb_write, reset_value);
+	wmb(); /* Make sure this is visible to HW (paranoia?) */
+
+	/*
+	 * Sometimes Icelake forgets to reset its pointers on a GPU reset.
+	 * Bludgeon them with a mmio update to be sure.
+	 */
+	ENGINE_WRITE(engine, RING_CONTEXT_STATUS_PTR,
+		     reset_value << 8 | reset_value);
+	ENGINE_POSTING_READ(engine, RING_CONTEXT_STATUS_PTR);
+
+	invalidate_csb_entries(&execlists->csb_status[0],
+			       &execlists->csb_status[reset_value]);
+}
+
+static void execlists_sanitize(struct intel_engine_cs *engine)
+{
+	/*
+	 * Poison residual state on resume, in case the suspend didn't!
+	 *
+	 * We have to assume that across suspend/resume (or other loss
+	 * of control) that the contents of our pinned buffers has been
+	 * lost, replaced by garbage. Since this doesn't always happen,
+	 * let's poison such state so that we more quickly spot when
+	 * we falsely assume it has been preserved.
+	 */
+	if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM))
+		memset(engine->status_page.addr, POISON_INUSE, PAGE_SIZE);
+
+	reset_csb_pointers(engine);
+
+	/*
+	 * The kernel_context HWSP is stored in the status_page. As above,
+	 * that may be lost on resume/initialisation, and so we need to
+	 * reset the value in the HWSP.
+	 */
+	intel_timeline_reset_seqno(engine->kernel_context->timeline);
+
+	/* And scrub the dirty cachelines for the HWSP */
+	clflush_cache_range(engine->status_page.addr, PAGE_SIZE);
+}
+
 static void enable_error_interrupt(struct intel_engine_cs *engine)
 {
 	u32 status;
@@ -3485,7 +3947,7 @@ static void enable_error_interrupt(struct intel_engine_cs *engine)
 
 	status = ENGINE_READ(engine, RING_ESR);
 	if (unlikely(status)) {
-		dev_err(engine->i915->drm.dev,
+		drm_err(&engine->i915->drm,
 			"engine '%s' resumed still in error: %08x\n",
 			engine->name, status);
 		__intel_gt_reset(engine->gt, engine->mask);
@@ -3541,7 +4003,7 @@ static void enable_execlists(struct intel_engine_cs *engine)
 
 	enable_error_interrupt(engine);
 
-	engine->context_tag = 0;
+	engine->context_tag = GENMASK(BITS_PER_LONG - 2, 0);
 }
 
 static bool unexpected_starting_state(struct intel_engine_cs *engine)
@@ -3549,7 +4011,8 @@ static bool unexpected_starting_state(struct intel_engine_cs *engine)
 	bool unexpected = false;
 
 	if (ENGINE_READ_FW(engine, RING_MI_MODE) & STOP_RING) {
-		DRM_DEBUG_DRIVER("STOP_RING still set in RING_MI_MODE\n");
+		drm_dbg(&engine->i915->drm,
+			"STOP_RING still set in RING_MI_MODE\n");
 		unexpected = true;
 	}
 
@@ -3609,41 +4072,10 @@ static void execlists_reset_prepare(struct intel_engine_cs *engine)
 	 *
 	 * FIXME: Wa for more modern gens needs to be validated
 	 */
+	ring_set_paused(engine, 1);
 	intel_engine_stop_cs(engine);
 }
 
-static void reset_csb_pointers(struct intel_engine_cs *engine)
-{
-	struct intel_engine_execlists * const execlists = &engine->execlists;
-	const unsigned int reset_value = execlists->csb_size - 1;
-
-	ring_set_paused(engine, 0);
-
-	/*
-	 * After a reset, the HW starts writing into CSB entry [0]. We
-	 * therefore have to set our HEAD pointer back one entry so that
-	 * the *first* entry we check is entry 0. To complicate this further,
-	 * as we don't wait for the first interrupt after reset, we have to
-	 * fake the HW write to point back to the last entry so that our
-	 * inline comparison of our cached head position against the last HW
-	 * write works even before the first interrupt.
-	 */
-	execlists->csb_head = reset_value;
-	WRITE_ONCE(*execlists->csb_write, reset_value);
-	wmb(); /* Make sure this is visible to HW (paranoia?) */
-
-	/*
-	 * Sometimes Icelake forgets to reset its pointers on a GPU reset.
-	 * Bludgeon them with a mmio update to be sure.
-	 */
-	ENGINE_WRITE(engine, RING_CONTEXT_STATUS_PTR,
-		     reset_value << 8 | reset_value);
-	ENGINE_POSTING_READ(engine, RING_CONTEXT_STATUS_PTR);
-
-	invalidate_csb_entries(&execlists->csb_status[0],
-			       &execlists->csb_status[reset_value]);
-}
-
 static void __reset_stop_ring(u32 *regs, const struct intel_engine_cs *engine)
 {
 	int x;
@@ -3753,7 +4185,7 @@ static void __execlists_reset(struct intel_engine_cs *engine, bool stalled)
 		     head, ce->ring->tail);
 	__execlists_reset_reg_state(ce, engine);
 	__execlists_update_reg_state(ce, engine, head);
-	ce->lrc_desc |= CTX_DESC_FORCE_RESTORE; /* paranoid: GPU was reset! */
+	ce->lrc.desc |= CTX_DESC_FORCE_RESTORE; /* paranoid: GPU was reset! */
 
 unwind:
 	/* Push back any incomplete requests for replay after the reset. */
@@ -4392,6 +4824,8 @@ static void execlists_shutdown(struct intel_engine_cs *engine)
 
 static void execlists_release(struct intel_engine_cs *engine)
 {
+	engine->sanitize = NULL; /* no longer in control, nothing to sanitize */
+
 	execlists_shutdown(engine);
 
 	intel_engine_cleanup_common(engine);
@@ -4449,6 +4883,7 @@ logical_ring_default_irqs(struct intel_engine_cs *engine)
 	engine->irq_enable_mask = GT_RENDER_USER_INTERRUPT << shift;
 	engine->irq_keep_mask = GT_CONTEXT_SWITCH_INTERRUPT << shift;
 	engine->irq_keep_mask |= GT_CS_MASTER_ERROR_INTERRUPT << shift;
+	engine->irq_keep_mask |= GT_WAIT_SEMAPHORE_INTERRUPT << shift;
 }
 
 static void rcs_submission_override(struct intel_engine_cs *engine)
@@ -4493,7 +4928,7 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine)
 		 * because we only expect rare glitches but nothing
 		 * critical to prevent us from using GPU
 		 */
-		DRM_ERROR("WA batch buffer initialization failed\n");
+		drm_err(&i915->drm, "WA batch buffer initialization failed\n");
 
 	if (HAS_LOGICAL_RING_ELSQ(i915)) {
 		execlists->submit_reg = uncore->regs +
@@ -4516,48 +4951,18 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine)
 	else
 		execlists->csb_size = GEN11_CSB_ENTRIES;
 
-	reset_csb_pointers(engine);
+	if (INTEL_GEN(engine->i915) >= 11) {
+		execlists->ccid |= engine->instance << (GEN11_ENGINE_INSTANCE_SHIFT - 32);
+		execlists->ccid |= engine->class << (GEN11_ENGINE_CLASS_SHIFT - 32);
+	}
 
 	/* Finally, take ownership and responsibility for cleanup! */
+	engine->sanitize = execlists_sanitize;
 	engine->release = execlists_release;
 
 	return 0;
 }
 
-static u32 intel_lr_indirect_ctx_offset(const struct intel_engine_cs *engine)
-{
-	u32 indirect_ctx_offset;
-
-	switch (INTEL_GEN(engine->i915)) {
-	default:
-		MISSING_CASE(INTEL_GEN(engine->i915));
-		/* fall through */
-	case 12:
-		indirect_ctx_offset =
-			GEN12_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
-		break;
-	case 11:
-		indirect_ctx_offset =
-			GEN11_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
-		break;
-	case 10:
-		indirect_ctx_offset =
-			GEN10_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
-		break;
-	case 9:
-		indirect_ctx_offset =
-			GEN9_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
-		break;
-	case 8:
-		indirect_ctx_offset =
-			GEN8_CTX_RCS_INDIRECT_CTX_OFFSET_DEFAULT;
-		break;
-	}
-
-	return indirect_ctx_offset;
-}
-
-
 static void init_common_reg_state(u32 * const regs,
 				  const struct intel_engine_cs *engine,
 				  const struct intel_ring *ring,
@@ -4575,30 +4980,27 @@ static void init_common_reg_state(u32 * const regs,
 	regs[CTX_CONTEXT_CONTROL] = ctl;
 
 	regs[CTX_RING_CTL] = RING_CTL_SIZE(ring->size) | RING_VALID;
+	regs[CTX_TIMESTAMP] = 0;
 }
 
 static void init_wa_bb_reg_state(u32 * const regs,
-				 const struct intel_engine_cs *engine,
-				 u32 pos_bb_per_ctx)
+				 const struct intel_engine_cs *engine)
 {
 	const struct i915_ctx_workarounds * const wa_ctx = &engine->wa_ctx;
 
 	if (wa_ctx->per_ctx.size) {
 		const u32 ggtt_offset = i915_ggtt_offset(wa_ctx->vma);
 
-		regs[pos_bb_per_ctx] =
+		GEM_BUG_ON(lrc_ring_wa_bb_per_ctx(engine) == -1);
+		regs[lrc_ring_wa_bb_per_ctx(engine) + 1] =
 			(ggtt_offset + wa_ctx->per_ctx.offset) | 0x01;
 	}
 
 	if (wa_ctx->indirect_ctx.size) {
-		const u32 ggtt_offset = i915_ggtt_offset(wa_ctx->vma);
-
-		regs[pos_bb_per_ctx + 2] =
-			(ggtt_offset + wa_ctx->indirect_ctx.offset) |
-			(wa_ctx->indirect_ctx.size / CACHELINE_BYTES);
-
-		regs[pos_bb_per_ctx + 4] =
-			intel_lr_indirect_ctx_offset(engine) << 6;
+		lrc_ring_setup_indirect_ctx(regs, engine,
+					    i915_ggtt_offset(wa_ctx->vma) +
+					    wa_ctx->indirect_ctx.offset,
+					    wa_ctx->indirect_ctx.size);
 	}
 }
 
@@ -4647,10 +5049,7 @@ static void execlists_init_reg_state(u32 *regs,
 	init_common_reg_state(regs, engine, ring, inhibit);
 	init_ppgtt_reg_state(regs, vm_alias(ce->vm));
 
-	init_wa_bb_reg_state(regs, engine,
-			     INTEL_GEN(engine->i915) >= 12 ?
-			     GEN12_CTX_BB_PER_CTX_PTR :
-			     CTX_BB_PER_CTX_PTR);
+	init_wa_bb_reg_state(regs, engine);
 
 	__reset_stop_ring(regs, engine);
 }
@@ -4663,29 +5062,18 @@ populate_lr_context(struct intel_context *ce,
 {
 	bool inhibit = true;
 	void *vaddr;
-	int ret;
 
 	vaddr = i915_gem_object_pin_map(ctx_obj, I915_MAP_WB);
 	if (IS_ERR(vaddr)) {
-		ret = PTR_ERR(vaddr);
-		DRM_DEBUG_DRIVER("Could not map object pages! (%d)\n", ret);
-		return ret;
+		drm_dbg(&engine->i915->drm, "Could not map object pages!\n");
+		return PTR_ERR(vaddr);
 	}
 
 	set_redzone(vaddr, engine);
 
 	if (engine->default_state) {
-		void *defaults;
-
-		defaults = i915_gem_object_pin_map(engine->default_state,
-						   I915_MAP_WB);
-		if (IS_ERR(defaults)) {
-			ret = PTR_ERR(defaults);
-			goto err_unpin_ctx;
-		}
-
-		memcpy(vaddr, defaults, engine->context_size);
-		i915_gem_object_unpin_map(engine->default_state);
+		shmem_read(engine->default_state, 0,
+			   vaddr, engine->context_size);
 		__set_bit(CONTEXT_VALID_BIT, &ce->flags);
 		inhibit = false;
 	}
@@ -4697,14 +5085,12 @@ populate_lr_context(struct intel_context *ce,
 	 * The second page of the context object contains some registers which
 	 * must be set up prior to the first execution.
 	 */
-	execlists_init_reg_state(vaddr + LRC_STATE_PN * PAGE_SIZE,
+	execlists_init_reg_state(vaddr + LRC_STATE_OFFSET,
 				 ce, engine, ring, inhibit);
 
-	ret = 0;
-err_unpin_ctx:
 	__i915_gem_object_flush_map(ctx_obj, 0, engine->context_size);
 	i915_gem_object_unpin_map(ctx_obj);
-	return ret;
+	return 0;
 }
 
 static int __execlists_context_alloc(struct intel_context *ce,
@@ -4722,6 +5108,11 @@ static int __execlists_context_alloc(struct intel_context *ce,
 	if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM))
 		context_size += I915_GTT_PAGE_SIZE; /* for redzone */
 
+	if (INTEL_GEN(engine->i915) == 12) {
+		ce->wa_bb_page = context_size / PAGE_SIZE;
+		context_size += PAGE_SIZE;
+	}
+
 	ctx_obj = i915_gem_object_create_shmem(engine->i915, context_size);
 	if (IS_ERR(ctx_obj))
 		return PTR_ERR(ctx_obj);
@@ -4761,7 +5152,8 @@ static int __execlists_context_alloc(struct intel_context *ce,
 
 	ret = populate_lr_context(ce, ctx_obj, engine, ring);
 	if (ret) {
-		DRM_DEBUG_DRIVER("Failed to populate LRC: %d\n", ret);
+		drm_dbg(&engine->i915->drm,
+			"Failed to populate LRC: %d\n", ret);
 		goto error_ring_free;
 	}
 
@@ -4814,6 +5206,8 @@ static void virtual_context_destroy(struct kref *kref)
 		__execlists_context_fini(&ve->context);
 	intel_context_fini(&ve->context);
 
+	intel_engine_free_request_pool(&ve->base);
+
 	kfree(ve->bonds);
 	kfree(ve);
 }
@@ -4938,12 +5332,15 @@ static void virtual_submission_tasklet(unsigned long data)
 		return;
 
 	local_irq_disable();
-	for (n = 0; READ_ONCE(ve->request) && n < ve->num_siblings; n++) {
-		struct intel_engine_cs *sibling = ve->siblings[n];
+	for (n = 0; n < ve->num_siblings; n++) {
+		struct intel_engine_cs *sibling = READ_ONCE(ve->siblings[n]);
 		struct ve_node * const node = &ve->nodes[sibling->id];
 		struct rb_node **parent, *rb;
 		bool first;
 
+		if (!READ_ONCE(ve->request))
+			break; /* already handled by a sibling's tasklet */
+
 		if (unlikely(!(mask & sibling->mask))) {
 			if (!RB_EMPTY_NODE(&node->rb)) {
 				spin_lock(&sibling->active.lock);
@@ -4994,10 +5391,8 @@ static void virtual_submission_tasklet(unsigned long data)
 submit_engine:
 		GEM_BUG_ON(RB_EMPTY_NODE(&node->rb));
 		node->prio = prio;
-		if (first && prio > sibling->execlists.queue_priority_hint) {
-			sibling->execlists.queue_priority_hint = prio;
+		if (first && prio > sibling->execlists.queue_priority_hint)
 			tasklet_hi_schedule(&sibling->execlists.tasklet);
-		}
 
 		spin_unlock(&sibling->active.lock);
 	}
diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.h b/drivers/gpu/drm/i915/gt/intel_lrc.h
index dfbc214e14f5..91fd8e452d9b 100644
--- a/drivers/gpu/drm/i915/gt/intel_lrc.h
+++ b/drivers/gpu/drm/i915/gt/intel_lrc.h
@@ -90,6 +90,7 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine);
 #define LRC_PPHWSP_SZ	(1)
 /* After the PPHWSP we have the logical state for the context */
 #define LRC_STATE_PN	(LRC_PPHWSP_PN + LRC_PPHWSP_SZ)
+#define LRC_STATE_OFFSET (LRC_STATE_PN * PAGE_SIZE)
 
 /* Space within PPHWSP reserved to be used as scratch */
 #define LRC_PPHWSP_SCRATCH		0x34
diff --git a/drivers/gpu/drm/i915/gt/intel_lrc_reg.h b/drivers/gpu/drm/i915/gt/intel_lrc_reg.h
index d39b72590e40..93cb6c460508 100644
--- a/drivers/gpu/drm/i915/gt/intel_lrc_reg.h
+++ b/drivers/gpu/drm/i915/gt/intel_lrc_reg.h
@@ -9,14 +9,13 @@
 
 #include <linux/types.h>
 
-/* GEN8 to GEN11 Reg State Context */
+/* GEN8 to GEN12 Reg State Context */
 #define CTX_CONTEXT_CONTROL		(0x02 + 1)
 #define CTX_RING_HEAD			(0x04 + 1)
 #define CTX_RING_TAIL			(0x06 + 1)
 #define CTX_RING_START			(0x08 + 1)
 #define CTX_RING_CTL			(0x0a + 1)
 #define CTX_BB_STATE			(0x10 + 1)
-#define CTX_BB_PER_CTX_PTR		(0x18 + 1)
 #define CTX_TIMESTAMP			(0x22 + 1)
 #define CTX_PDP3_UDW			(0x24 + 1)
 #define CTX_PDP3_LDW			(0x26 + 1)
@@ -30,9 +29,6 @@
 
 #define GEN9_CTX_RING_MI_MODE		0x54
 
-/* GEN12+ Reg State Context */
-#define GEN12_CTX_BB_PER_CTX_PTR		(0x12 + 1)
-
 #define ASSIGN_CTX_PDP(ppgtt, reg_state, n) do { \
 	u32 *reg_state__ = (reg_state); \
 	const u64 addr__ = i915_page_dir_dma_addr((ppgtt), (n)); \
diff --git a/drivers/gpu/drm/i915/gt/intel_rc6.c b/drivers/gpu/drm/i915/gt/intel_rc6.c
index 3847ee44b181..1c1923ec8be7 100644
--- a/drivers/gpu/drm/i915/gt/intel_rc6.c
+++ b/drivers/gpu/drm/i915/gt/intel_rc6.c
@@ -246,16 +246,18 @@ static void gen6_rc6_enable(struct intel_rc6 *rc6)
 	ret = sandybridge_pcode_read(i915, GEN6_PCODE_READ_RC6VIDS,
 				     &rc6vids, NULL);
 	if (IS_GEN(i915, 6) && ret) {
-		DRM_DEBUG_DRIVER("Couldn't check for BIOS workaround\n");
+		drm_dbg(&i915->drm, "Couldn't check for BIOS workaround\n");
 	} else if (IS_GEN(i915, 6) &&
 		   (GEN6_DECODE_RC6_VID(rc6vids & 0xff) < 450)) {
-		DRM_DEBUG_DRIVER("You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n",
-				 GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450);
+		drm_dbg(&i915->drm,
+			"You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n",
+			GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450);
 		rc6vids &= 0xffff00;
 		rc6vids |= GEN6_ENCODE_RC6_VID(450);
 		ret = sandybridge_pcode_write(i915, GEN6_PCODE_WRITE_RC6VIDS, rc6vids);
 		if (ret)
-			DRM_ERROR("Couldn't fix incorrect rc6 voltage\n");
+			drm_err(&i915->drm,
+				"Couldn't fix incorrect rc6 voltage\n");
 	}
 }
 
@@ -263,14 +265,15 @@ static void gen6_rc6_enable(struct intel_rc6 *rc6)
 static int chv_rc6_init(struct intel_rc6 *rc6)
 {
 	struct intel_uncore *uncore = rc6_to_uncore(rc6);
+	struct drm_i915_private *i915 = rc6_to_i915(rc6);
 	resource_size_t pctx_paddr, paddr;
 	resource_size_t pctx_size = 32 * SZ_1K;
 	u32 pcbr;
 
 	pcbr = intel_uncore_read(uncore, VLV_PCBR);
 	if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
-		DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
-		paddr = rc6_to_i915(rc6)->dsm.end + 1 - pctx_size;
+		drm_dbg(&i915->drm, "BIOS didn't set up PCBR, fixing up\n");
+		paddr = i915->dsm.end + 1 - pctx_size;
 		GEM_BUG_ON(paddr > U32_MAX);
 
 		pctx_paddr = (paddr & ~4095);
@@ -304,7 +307,7 @@ static int vlv_rc6_init(struct intel_rc6 *rc6)
 		goto out;
 	}
 
-	DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
+	drm_dbg(&i915->drm, "BIOS didn't set up PCBR, fixing up\n");
 
 	/*
 	 * From the Gunit register HAS:
@@ -316,7 +319,8 @@ static int vlv_rc6_init(struct intel_rc6 *rc6)
 	 */
 	pctx = i915_gem_object_create_stolen(i915, pctx_size);
 	if (IS_ERR(pctx)) {
-		DRM_DEBUG("not enough stolen space for PCTX, disabling\n");
+		drm_dbg(&i915->drm,
+			"not enough stolen space for PCTX, disabling\n");
 		return PTR_ERR(pctx);
 	}
 
@@ -398,14 +402,14 @@ static bool bxt_check_bios_rc6_setup(struct intel_rc6 *rc6)
 	rc_sw_target = intel_uncore_read(uncore, GEN6_RC_STATE);
 	rc_sw_target &= RC_SW_TARGET_STATE_MASK;
 	rc_sw_target >>= RC_SW_TARGET_STATE_SHIFT;
-	DRM_DEBUG_DRIVER("BIOS enabled RC states: "
+	drm_dbg(&i915->drm, "BIOS enabled RC states: "
 			 "HW_CTRL %s HW_RC6 %s SW_TARGET_STATE %x\n",
 			 onoff(rc_ctl & GEN6_RC_CTL_HW_ENABLE),
 			 onoff(rc_ctl & GEN6_RC_CTL_RC6_ENABLE),
 			 rc_sw_target);
 
 	if (!(intel_uncore_read(uncore, RC6_LOCATION) & RC6_CTX_IN_DRAM)) {
-		DRM_DEBUG_DRIVER("RC6 Base location not set properly.\n");
+		drm_dbg(&i915->drm, "RC6 Base location not set properly.\n");
 		enable_rc6 = false;
 	}
 
@@ -417,7 +421,7 @@ static bool bxt_check_bios_rc6_setup(struct intel_rc6 *rc6)
 		intel_uncore_read(uncore, RC6_CTX_BASE) & RC6_CTX_BASE_MASK;
 	if (!(rc6_ctx_base >= i915->dsm_reserved.start &&
 	      rc6_ctx_base + PAGE_SIZE < i915->dsm_reserved.end)) {
-		DRM_DEBUG_DRIVER("RC6 Base address not as expected.\n");
+		drm_dbg(&i915->drm, "RC6 Base address not as expected.\n");
 		enable_rc6 = false;
 	}
 
@@ -425,24 +429,25 @@ static bool bxt_check_bios_rc6_setup(struct intel_rc6 *rc6)
 	      (intel_uncore_read(uncore, PWRCTX_MAXCNT_VCSUNIT0) & IDLE_TIME_MASK) > 1 &&
 	      (intel_uncore_read(uncore, PWRCTX_MAXCNT_BCSUNIT) & IDLE_TIME_MASK) > 1 &&
 	      (intel_uncore_read(uncore, PWRCTX_MAXCNT_VECSUNIT) & IDLE_TIME_MASK) > 1)) {
-		DRM_DEBUG_DRIVER("Engine Idle wait time not set properly.\n");
+		drm_dbg(&i915->drm,
+			"Engine Idle wait time not set properly.\n");
 		enable_rc6 = false;
 	}
 
 	if (!intel_uncore_read(uncore, GEN8_PUSHBUS_CONTROL) ||
 	    !intel_uncore_read(uncore, GEN8_PUSHBUS_ENABLE) ||
 	    !intel_uncore_read(uncore, GEN8_PUSHBUS_SHIFT)) {
-		DRM_DEBUG_DRIVER("Pushbus not setup properly.\n");
+		drm_dbg(&i915->drm, "Pushbus not setup properly.\n");
 		enable_rc6 = false;
 	}
 
 	if (!intel_uncore_read(uncore, GEN6_GFXPAUSE)) {
-		DRM_DEBUG_DRIVER("GFX pause not setup properly.\n");
+		drm_dbg(&i915->drm, "GFX pause not setup properly.\n");
 		enable_rc6 = false;
 	}
 
 	if (!intel_uncore_read(uncore, GEN8_MISC_CTRL0)) {
-		DRM_DEBUG_DRIVER("GPM control not setup properly.\n");
+		drm_dbg(&i915->drm, "GPM control not setup properly.\n");
 		enable_rc6 = false;
 	}
 
@@ -463,7 +468,7 @@ static bool rc6_supported(struct intel_rc6 *rc6)
 		return false;
 
 	if (IS_GEN9_LP(i915) && !bxt_check_bios_rc6_setup(rc6)) {
-		dev_notice(i915->drm.dev,
+		drm_notice(&i915->drm,
 			   "RC6 and powersaving disabled by BIOS\n");
 		return false;
 	}
@@ -495,7 +500,7 @@ static bool pctx_corrupted(struct intel_rc6 *rc6)
 	if (intel_uncore_read(rc6_to_uncore(rc6), GEN8_RC6_CTX_INFO))
 		return false;
 
-	dev_notice(i915->drm.dev,
+	drm_notice(&i915->drm,
 		   "RC6 context corruption, disabling runtime power management\n");
 	return true;
 }
diff --git a/drivers/gpu/drm/i915/gt/intel_renderstate.c b/drivers/gpu/drm/i915/gt/intel_renderstate.c
index 5954ecc3207f..708cb7808865 100644
--- a/drivers/gpu/drm/i915/gt/intel_renderstate.c
+++ b/drivers/gpu/drm/i915/gt/intel_renderstate.c
@@ -102,7 +102,7 @@ static int render_state_setup(struct intel_renderstate *so,
 	}
 
 	if (rodata->reloc[reloc_index] != -1) {
-		DRM_ERROR("only %d relocs resolved\n", reloc_index);
+		drm_err(&i915->drm, "only %d relocs resolved\n", reloc_index);
 		goto err;
 	}
 
@@ -194,7 +194,7 @@ int intel_renderstate_init(struct intel_renderstate *so,
 
 	err = i915_vma_pin(so->vma, 0, 0, PIN_GLOBAL | PIN_HIGH);
 	if (err)
-		goto err_vma;
+		goto err_obj;
 
 	err = render_state_setup(so, engine->i915);
 	if (err)
@@ -204,8 +204,6 @@ int intel_renderstate_init(struct intel_renderstate *so,
 
 err_unpin:
 	i915_vma_unpin(so->vma);
-err_vma:
-	i915_vma_close(so->vma);
 err_obj:
 	i915_gem_object_put(obj);
 	so->vma = NULL;
diff --git a/drivers/gpu/drm/i915/gt/intel_reset.c b/drivers/gpu/drm/i915/gt/intel_reset.c
index 80db3c9d785e..39070b514e65 100644
--- a/drivers/gpu/drm/i915/gt/intel_reset.c
+++ b/drivers/gpu/drm/i915/gt/intel_reset.c
@@ -109,7 +109,7 @@ static bool mark_guilty(struct i915_request *rq)
 		goto out;
 	}
 
-	dev_notice(ctx->i915->drm.dev,
+	drm_notice(&ctx->i915->drm,
 		   "%s context reset due to GPU hang\n",
 		   ctx->name);
 
@@ -755,7 +755,7 @@ static int gt_reset(struct intel_gt *gt, intel_engine_mask_t stalled_mask)
 	for_each_engine(engine, gt, id)
 		__intel_engine_reset(engine, stalled_mask & engine->mask);
 
-	i915_gem_restore_fences(gt->ggtt);
+	intel_ggtt_restore_fences(gt->ggtt);
 
 	return err;
 }
@@ -1031,7 +1031,7 @@ void intel_gt_reset(struct intel_gt *gt,
 		goto unlock;
 
 	if (reason)
-		dev_notice(gt->i915->drm.dev,
+		drm_notice(&gt->i915->drm,
 			   "Resetting chip for %s\n", reason);
 	atomic_inc(&gt->i915->gpu_error.reset_count);
 
@@ -1039,7 +1039,7 @@ void intel_gt_reset(struct intel_gt *gt,
 
 	if (!intel_has_gpu_reset(gt)) {
 		if (i915_modparams.reset)
-			dev_err(gt->i915->drm.dev, "GPU reset not supported\n");
+			drm_err(&gt->i915->drm, "GPU reset not supported\n");
 		else
 			drm_dbg(&gt->i915->drm, "GPU reset disabled\n");
 		goto error;
@@ -1049,7 +1049,7 @@ void intel_gt_reset(struct intel_gt *gt,
 		intel_runtime_pm_disable_interrupts(gt->i915);
 
 	if (do_reset(gt, stalled_mask)) {
-		dev_err(gt->i915->drm.dev, "Failed to reset chip\n");
+		drm_err(&gt->i915->drm, "Failed to reset chip\n");
 		goto taint;
 	}
 
@@ -1111,7 +1111,7 @@ static inline int intel_gt_reset_engine(struct intel_engine_cs *engine)
 /**
  * intel_engine_reset - reset GPU engine to recover from a hang
  * @engine: engine to reset
- * @msg: reason for GPU reset; or NULL for no dev_notice()
+ * @msg: reason for GPU reset; or NULL for no drm_notice()
  *
  * Reset a specific GPU engine. Useful if a hang is detected.
  * Returns zero on successful reset or otherwise an error code.
@@ -1136,7 +1136,7 @@ int intel_engine_reset(struct intel_engine_cs *engine, const char *msg)
 	reset_prepare_engine(engine);
 
 	if (msg)
-		dev_notice(engine->i915->drm.dev,
+		drm_notice(&engine->i915->drm,
 			   "Resetting %s for %s\n", engine->name, msg);
 	atomic_inc(&engine->i915->gpu_error.reset_engine_count[engine->uabi_class]);
 
@@ -1381,7 +1381,7 @@ static void intel_wedge_me(struct work_struct *work)
 {
 	struct intel_wedge_me *w = container_of(work, typeof(*w), work.work);
 
-	dev_err(w->gt->i915->drm.dev,
+	drm_err(&w->gt->i915->drm,
 		"%s timed out, cancelling all in-flight rendering.\n",
 		w->name);
 	intel_gt_set_wedged(w->gt);
diff --git a/drivers/gpu/drm/i915/gt/intel_ring.h b/drivers/gpu/drm/i915/gt/intel_ring.h
index 5bdce24994aa..cc0ebca65167 100644
--- a/drivers/gpu/drm/i915/gt/intel_ring.h
+++ b/drivers/gpu/drm/i915/gt/intel_ring.h
@@ -88,6 +88,8 @@ static inline u32 intel_ring_offset(const struct i915_request *rq, void *addr)
 static inline void
 assert_ring_tail_valid(const struct intel_ring *ring, unsigned int tail)
 {
+	unsigned int head = READ_ONCE(ring->head);
+
 	GEM_BUG_ON(!intel_ring_offset_valid(ring, tail));
 
 	/*
@@ -105,8 +107,7 @@ assert_ring_tail_valid(const struct intel_ring *ring, unsigned int tail)
 	 * into the same cacheline as ring->head.
 	 */
 #define cacheline(a) round_down(a, CACHELINE_BYTES)
-	GEM_BUG_ON(cacheline(tail) == cacheline(ring->head) &&
-		   tail < ring->head);
+	GEM_BUG_ON(cacheline(tail) == cacheline(head) && tail < head);
 #undef cacheline
 }
 
diff --git a/drivers/gpu/drm/i915/gt/intel_ring_submission.c b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
index fdc3f10e12aa..ca7286e58409 100644
--- a/drivers/gpu/drm/i915/gt/intel_ring_submission.c
+++ b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
@@ -42,6 +42,7 @@
 #include "intel_reset.h"
 #include "intel_ring.h"
 #include "intel_workarounds.h"
+#include "shmem_utils.h"
 
 /* Rough estimate of the typical request size, performing a flush,
  * set-context and then emitting the batch.
@@ -577,8 +578,9 @@ static void flush_cs_tlb(struct intel_engine_cs *engine)
 				    RING_INSTPM(engine->mmio_base),
 				    INSTPM_SYNC_FLUSH, 0,
 				    1000))
-		DRM_ERROR("%s: wait for SyncFlush to complete for TLB invalidation timed out\n",
-			  engine->name);
+		drm_err(&dev_priv->drm,
+			"%s: wait for SyncFlush to complete for TLB invalidation timed out\n",
+			engine->name);
 }
 
 static void ring_setup_status_page(struct intel_engine_cs *engine)
@@ -601,8 +603,9 @@ static bool stop_ring(struct intel_engine_cs *engine)
 					    MODE_IDLE,
 					    MODE_IDLE,
 					    1000)) {
-			DRM_ERROR("%s : timed out trying to stop ring\n",
-				  engine->name);
+			drm_err(&dev_priv->drm,
+				"%s : timed out trying to stop ring\n",
+				engine->name);
 
 			/*
 			 * Sometimes we observe that the idle flag is not
@@ -661,22 +664,23 @@ static int xcs_resume(struct intel_engine_cs *engine)
 	/* WaClearRingBufHeadRegAtInit:ctg,elk */
 	if (!stop_ring(engine)) {
 		/* G45 ring initialization often fails to reset head to zero */
-		DRM_DEBUG_DRIVER("%s head not reset to zero "
+		drm_dbg(&dev_priv->drm, "%s head not reset to zero "
+			"ctl %08x head %08x tail %08x start %08x\n",
+			engine->name,
+			ENGINE_READ(engine, RING_CTL),
+			ENGINE_READ(engine, RING_HEAD),
+			ENGINE_READ(engine, RING_TAIL),
+			ENGINE_READ(engine, RING_START));
+
+		if (!stop_ring(engine)) {
+			drm_err(&dev_priv->drm,
+				"failed to set %s head to zero "
 				"ctl %08x head %08x tail %08x start %08x\n",
 				engine->name,
 				ENGINE_READ(engine, RING_CTL),
 				ENGINE_READ(engine, RING_HEAD),
 				ENGINE_READ(engine, RING_TAIL),
 				ENGINE_READ(engine, RING_START));
-
-		if (!stop_ring(engine)) {
-			DRM_ERROR("failed to set %s head to zero "
-				  "ctl %08x head %08x tail %08x start %08x\n",
-				  engine->name,
-				  ENGINE_READ(engine, RING_CTL),
-				  ENGINE_READ(engine, RING_HEAD),
-				  ENGINE_READ(engine, RING_TAIL),
-				  ENGINE_READ(engine, RING_START));
 			ret = -EIO;
 			goto out;
 		}
@@ -719,7 +723,7 @@ static int xcs_resume(struct intel_engine_cs *engine)
 				    RING_CTL(engine->mmio_base),
 				    RING_VALID, RING_VALID,
 				    50)) {
-		DRM_ERROR("%s initialization failed "
+		drm_err(&dev_priv->drm, "%s initialization failed "
 			  "ctl %08x (valid? %d) head %08x [%08x] tail %08x [%08x] start %08x [expected %08x]\n",
 			  engine->name,
 			  ENGINE_READ(engine, RING_CTL),
@@ -1238,7 +1242,7 @@ alloc_context_vma(struct intel_engine_cs *engine)
 		i915_gem_object_set_cache_coherency(obj, I915_CACHE_L3_LLC);
 
 	if (engine->default_state) {
-		void *defaults, *vaddr;
+		void *vaddr;
 
 		vaddr = i915_gem_object_pin_map(obj, I915_MAP_WB);
 		if (IS_ERR(vaddr)) {
@@ -1246,15 +1250,8 @@ alloc_context_vma(struct intel_engine_cs *engine)
 			goto err_obj;
 		}
 
-		defaults = i915_gem_object_pin_map(engine->default_state,
-						   I915_MAP_WB);
-		if (IS_ERR(defaults)) {
-			err = PTR_ERR(defaults);
-			goto err_map;
-		}
-
-		memcpy(vaddr, defaults, engine->context_size);
-		i915_gem_object_unpin_map(engine->default_state);
+		shmem_read(engine->default_state, 0,
+			   vaddr, engine->context_size);
 
 		i915_gem_object_flush_map(obj);
 		i915_gem_object_unpin_map(obj);
@@ -1268,8 +1265,6 @@ alloc_context_vma(struct intel_engine_cs *engine)
 
 	return vma;
 
-err_map:
-	i915_gem_object_unpin_map(obj);
 err_obj:
 	i915_gem_object_put(obj);
 	return ERR_PTR(err);
diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c b/drivers/gpu/drm/i915/gt/intel_rps.c
index 19542fd9e207..c682355ec79e 100644
--- a/drivers/gpu/drm/i915/gt/intel_rps.c
+++ b/drivers/gpu/drm/i915/gt/intel_rps.c
@@ -8,12 +8,15 @@
 
 #include "i915_drv.h"
 #include "intel_gt.h"
+#include "intel_gt_clock_utils.h"
 #include "intel_gt_irq.h"
 #include "intel_gt_pm_irq.h"
 #include "intel_rps.h"
 #include "intel_sideband.h"
 #include "../../../platform/x86/intel_ips.h"
 
+#define BUSY_MAX_EI	20u /* ms */
+
 /*
  * Lock protecting IPS related data structures
  */
@@ -44,6 +47,100 @@ static inline void set(struct intel_uncore *uncore, i915_reg_t reg, u32 val)
 	intel_uncore_write_fw(uncore, reg, val);
 }
 
+static void rps_timer(struct timer_list *t)
+{
+	struct intel_rps *rps = from_timer(rps, t, timer);
+	struct intel_engine_cs *engine;
+	enum intel_engine_id id;
+	s64 max_busy[3] = {};
+	ktime_t dt, last;
+
+	for_each_engine(engine, rps_to_gt(rps), id) {
+		s64 busy;
+		int i;
+
+		dt = intel_engine_get_busy_time(engine);
+		last = engine->stats.rps;
+		engine->stats.rps = dt;
+
+		busy = ktime_to_ns(ktime_sub(dt, last));
+		for (i = 0; i < ARRAY_SIZE(max_busy); i++) {
+			if (busy > max_busy[i])
+				swap(busy, max_busy[i]);
+		}
+	}
+
+	dt = ktime_get();
+	last = rps->pm_timestamp;
+	rps->pm_timestamp = dt;
+
+	if (intel_rps_is_active(rps)) {
+		s64 busy;
+		int i;
+
+		dt = ktime_sub(dt, last);
+
+		/*
+		 * Our goal is to evaluate each engine independently, so we run
+		 * at the lowest clocks required to sustain the heaviest
+		 * workload. However, a task may be split into sequential
+		 * dependent operations across a set of engines, such that
+		 * the independent contributions do not account for high load,
+		 * but overall the task is GPU bound. For example, consider
+		 * video decode on vcs followed by colour post-processing
+		 * on vecs, followed by general post-processing on rcs.
+		 * Since multi-engines being active does imply a single
+		 * continuous workload across all engines, we hedge our
+		 * bets by only contributing a factor of the distributed
+		 * load into our busyness calculation.
+		 */
+		busy = max_busy[0];
+		for (i = 1; i < ARRAY_SIZE(max_busy); i++) {
+			if (!max_busy[i])
+				break;
+
+			busy += div_u64(max_busy[i], 1 << i);
+		}
+		GT_TRACE(rps_to_gt(rps),
+			 "busy:%lld [%d%%], max:[%lld, %lld, %lld], interval:%d\n",
+			 busy, (int)div64_u64(100 * busy, dt),
+			 max_busy[0], max_busy[1], max_busy[2],
+			 rps->pm_interval);
+
+		if (100 * busy > rps->power.up_threshold * dt &&
+		    rps->cur_freq < rps->max_freq_softlimit) {
+			rps->pm_iir |= GEN6_PM_RP_UP_THRESHOLD;
+			rps->pm_interval = 1;
+			schedule_work(&rps->work);
+		} else if (100 * busy < rps->power.down_threshold * dt &&
+			   rps->cur_freq > rps->min_freq_softlimit) {
+			rps->pm_iir |= GEN6_PM_RP_DOWN_THRESHOLD;
+			rps->pm_interval = 1;
+			schedule_work(&rps->work);
+		} else {
+			rps->last_adj = 0;
+		}
+
+		mod_timer(&rps->timer,
+			  jiffies + msecs_to_jiffies(rps->pm_interval));
+		rps->pm_interval = min(rps->pm_interval * 2, BUSY_MAX_EI);
+	}
+}
+
+static void rps_start_timer(struct intel_rps *rps)
+{
+	rps->pm_timestamp = ktime_sub(ktime_get(), rps->pm_timestamp);
+	rps->pm_interval = 1;
+	mod_timer(&rps->timer, jiffies + 1);
+}
+
+static void rps_stop_timer(struct intel_rps *rps)
+{
+	del_timer_sync(&rps->timer);
+	rps->pm_timestamp = ktime_sub(ktime_get(), rps->pm_timestamp);
+	cancel_work_sync(&rps->work);
+}
+
 static u32 rps_pm_mask(struct intel_rps *rps, u8 val)
 {
 	u32 mask = 0;
@@ -57,7 +154,7 @@ static u32 rps_pm_mask(struct intel_rps *rps, u8 val)
 	if (val < rps->max_freq_softlimit)
 		mask |= GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_UP_THRESHOLD;
 
-	mask &= READ_ONCE(rps->pm_events);
+	mask &= rps->pm_events;
 
 	return rps_pm_sanitize_mask(rps, ~mask);
 }
@@ -70,18 +167,11 @@ static void rps_reset_ei(struct intel_rps *rps)
 static void rps_enable_interrupts(struct intel_rps *rps)
 {
 	struct intel_gt *gt = rps_to_gt(rps);
-	u32 events;
 
-	rps_reset_ei(rps);
+	GT_TRACE(gt, "interrupts:on rps->pm_events: %x, rps_pm_mask:%x\n",
+		 rps->pm_events, rps_pm_mask(rps, rps->last_freq));
 
-	if (IS_VALLEYVIEW(gt->i915))
-		/* WaGsvRC0ResidencyMethod:vlv */
-		events = GEN6_PM_RP_UP_EI_EXPIRED;
-	else
-		events = (GEN6_PM_RP_UP_THRESHOLD |
-			  GEN6_PM_RP_DOWN_THRESHOLD |
-			  GEN6_PM_RP_DOWN_TIMEOUT);
-	WRITE_ONCE(rps->pm_events, events);
+	rps_reset_ei(rps);
 
 	spin_lock_irq(&gt->irq_lock);
 	gen6_gt_pm_enable_irq(gt, rps->pm_events);
@@ -120,8 +210,6 @@ static void rps_disable_interrupts(struct intel_rps *rps)
 {
 	struct intel_gt *gt = rps_to_gt(rps);
 
-	WRITE_ONCE(rps->pm_events, 0);
-
 	intel_uncore_write(gt->uncore,
 			   GEN6_PMINTRMSK, rps_pm_sanitize_mask(rps, ~0u));
 
@@ -140,6 +228,7 @@ static void rps_disable_interrupts(struct intel_rps *rps)
 	cancel_work_sync(&rps->work);
 
 	rps_reset_interrupts(rps);
+	GT_TRACE(gt, "interrupts:off\n");
 }
 
 static const struct cparams {
@@ -186,14 +275,12 @@ static void gen5_rps_init(struct intel_rps *rps)
 	fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
 	fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
 		MEMMODE_FSTART_SHIFT;
-	DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
-			 fmax, fmin, fstart);
+	drm_dbg(&i915->drm, "fmax: %d, fmin: %d, fstart: %d\n",
+		fmax, fmin, fstart);
 
 	rps->min_freq = fmax;
+	rps->efficient_freq = fstart;
 	rps->max_freq = fmin;
-
-	rps->idle_freq = rps->min_freq;
-	rps->cur_freq = rps->idle_freq;
 }
 
 static unsigned long
@@ -456,7 +543,8 @@ static bool gen5_rps_enable(struct intel_rps *rps)
 
 	if (wait_for_atomic((intel_uncore_read(uncore, MEMSWCTL) &
 			     MEMCTL_CMD_STS) == 0, 10))
-		DRM_ERROR("stuck trying to change perf mode\n");
+		drm_err(&uncore->i915->drm,
+			"stuck trying to change perf mode\n");
 	mdelay(1);
 
 	gen5_rps_set(rps, rps->cur_freq);
@@ -533,8 +621,8 @@ static u32 rps_limits(struct intel_rps *rps, u8 val)
 
 static void rps_set_power(struct intel_rps *rps, int new_power)
 {
-	struct intel_uncore *uncore = rps_to_uncore(rps);
-	struct drm_i915_private *i915 = rps_to_i915(rps);
+	struct intel_gt *gt = rps_to_gt(rps);
+	struct intel_uncore *uncore = gt->uncore;
 	u32 threshold_up = 0, threshold_down = 0; /* in % */
 	u32 ei_up = 0, ei_down = 0;
 
@@ -543,55 +631,49 @@ static void rps_set_power(struct intel_rps *rps, int new_power)
 	if (new_power == rps->power.mode)
 		return;
 
+	threshold_up = 95;
+	threshold_down = 85;
+
 	/* Note the units here are not exactly 1us, but 1280ns. */
 	switch (new_power) {
 	case LOW_POWER:
-		/* Upclock if more than 95% busy over 16ms */
 		ei_up = 16000;
-		threshold_up = 95;
-
-		/* Downclock if less than 85% busy over 32ms */
 		ei_down = 32000;
-		threshold_down = 85;
 		break;
 
 	case BETWEEN:
-		/* Upclock if more than 90% busy over 13ms */
 		ei_up = 13000;
-		threshold_up = 90;
-
-		/* Downclock if less than 75% busy over 32ms */
 		ei_down = 32000;
-		threshold_down = 75;
 		break;
 
 	case HIGH_POWER:
-		/* Upclock if more than 85% busy over 10ms */
 		ei_up = 10000;
-		threshold_up = 85;
-
-		/* Downclock if less than 60% busy over 32ms */
 		ei_down = 32000;
-		threshold_down = 60;
 		break;
 	}
 
 	/* When byt can survive without system hang with dynamic
 	 * sw freq adjustments, this restriction can be lifted.
 	 */
-	if (IS_VALLEYVIEW(i915))
+	if (IS_VALLEYVIEW(gt->i915))
 		goto skip_hw_write;
 
-	set(uncore, GEN6_RP_UP_EI, GT_INTERVAL_FROM_US(i915, ei_up));
+	GT_TRACE(gt,
+		 "changing power mode [%d], up %d%% @ %dus, down %d%% @ %dus\n",
+		 new_power, threshold_up, ei_up, threshold_down, ei_down);
+
+	set(uncore, GEN6_RP_UP_EI,
+	    intel_gt_ns_to_pm_interval(gt, ei_up * 1000));
 	set(uncore, GEN6_RP_UP_THRESHOLD,
-	    GT_INTERVAL_FROM_US(i915, ei_up * threshold_up / 100));
+	    intel_gt_ns_to_pm_interval(gt, ei_up * threshold_up * 10));
 
-	set(uncore, GEN6_RP_DOWN_EI, GT_INTERVAL_FROM_US(i915, ei_down));
+	set(uncore, GEN6_RP_DOWN_EI,
+	    intel_gt_ns_to_pm_interval(gt, ei_down * 1000));
 	set(uncore, GEN6_RP_DOWN_THRESHOLD,
-	    GT_INTERVAL_FROM_US(i915, ei_down * threshold_down / 100));
+	    intel_gt_ns_to_pm_interval(gt, ei_down * threshold_down * 10));
 
 	set(uncore, GEN6_RP_CONTROL,
-	    (INTEL_GEN(i915) > 9 ? 0 : GEN6_RP_MEDIA_TURBO) |
+	    (INTEL_GEN(gt->i915) > 9 ? 0 : GEN6_RP_MEDIA_TURBO) |
 	    GEN6_RP_MEDIA_HW_NORMAL_MODE |
 	    GEN6_RP_MEDIA_IS_GFX |
 	    GEN6_RP_ENABLE |
@@ -646,9 +728,11 @@ static void gen6_rps_set_thresholds(struct intel_rps *rps, u8 val)
 
 void intel_rps_mark_interactive(struct intel_rps *rps, bool interactive)
 {
+	GT_TRACE(rps_to_gt(rps), "mark interactive: %s\n", yesno(interactive));
+
 	mutex_lock(&rps->power.mutex);
 	if (interactive) {
-		if (!rps->power.interactive++ && READ_ONCE(rps->active))
+		if (!rps->power.interactive++ && intel_rps_is_active(rps))
 			rps_set_power(rps, HIGH_POWER);
 	} else {
 		GEM_BUG_ON(!rps->power.interactive);
@@ -673,6 +757,9 @@ static int gen6_rps_set(struct intel_rps *rps, u8 val)
 			 GEN6_AGGRESSIVE_TURBO);
 	set(uncore, GEN6_RPNSWREQ, swreq);
 
+	GT_TRACE(rps_to_gt(rps), "set val:%x, freq:%d, swreq:%x\n",
+		 val, intel_gpu_freq(rps, val), swreq);
+
 	return 0;
 }
 
@@ -685,6 +772,9 @@ static int vlv_rps_set(struct intel_rps *rps, u8 val)
 	err = vlv_punit_write(i915, PUNIT_REG_GPU_FREQ_REQ, val);
 	vlv_punit_put(i915);
 
+	GT_TRACE(rps_to_gt(rps), "set val:%x, freq:%d\n",
+		 val, intel_gpu_freq(rps, val));
+
 	return err;
 }
 
@@ -715,29 +805,30 @@ static int rps_set(struct intel_rps *rps, u8 val, bool update)
 
 void intel_rps_unpark(struct intel_rps *rps)
 {
-	u8 freq;
-
-	if (!rps->enabled)
+	if (!intel_rps_is_enabled(rps))
 		return;
 
+	GT_TRACE(rps_to_gt(rps), "unpark:%x\n", rps->cur_freq);
+
 	/*
 	 * Use the user's desired frequency as a guide, but for better
 	 * performance, jump directly to RPe as our starting frequency.
 	 */
 	mutex_lock(&rps->lock);
 
-	WRITE_ONCE(rps->active, true);
-
-	freq = max(rps->cur_freq, rps->efficient_freq),
-	freq = clamp(freq, rps->min_freq_softlimit, rps->max_freq_softlimit);
-	intel_rps_set(rps, freq);
-
-	rps->last_adj = 0;
+	intel_rps_set_active(rps);
+	intel_rps_set(rps,
+		      clamp(rps->cur_freq,
+			    rps->min_freq_softlimit,
+			    rps->max_freq_softlimit));
 
 	mutex_unlock(&rps->lock);
 
-	if (INTEL_GEN(rps_to_i915(rps)) >= 6)
+	rps->pm_iir = 0;
+	if (intel_rps_has_interrupts(rps))
 		rps_enable_interrupts(rps);
+	if (intel_rps_uses_timer(rps))
+		rps_start_timer(rps);
 
 	if (IS_GEN(rps_to_i915(rps), 5))
 		gen5_rps_update(rps);
@@ -745,15 +836,16 @@ void intel_rps_unpark(struct intel_rps *rps)
 
 void intel_rps_park(struct intel_rps *rps)
 {
-	struct drm_i915_private *i915 = rps_to_i915(rps);
+	int adj;
 
-	if (!rps->enabled)
+	if (!intel_rps_clear_active(rps))
 		return;
 
-	if (INTEL_GEN(i915) >= 6)
+	if (intel_rps_uses_timer(rps))
+		rps_stop_timer(rps);
+	if (intel_rps_has_interrupts(rps))
 		rps_disable_interrupts(rps);
 
-	WRITE_ONCE(rps->active, false);
 	if (rps->last_freq <= rps->idle_freq)
 		return;
 
@@ -784,8 +876,15 @@ void intel_rps_park(struct intel_rps *rps)
 	 * (Note we accommodate Cherryview's limitation of only using an
 	 * even bin by applying it to all.)
 	 */
-	rps->cur_freq =
-		max_t(int, round_down(rps->cur_freq - 1, 2), rps->min_freq);
+	adj = rps->last_adj;
+	if (adj < 0)
+		adj *= 2;
+	else /* CHV needs even encode values */
+		adj = -2;
+	rps->last_adj = adj;
+	rps->cur_freq = max_t(int, rps->cur_freq + adj, rps->min_freq);
+
+	GT_TRACE(rps_to_gt(rps), "park:%x\n", rps->cur_freq);
 }
 
 void intel_rps_boost(struct i915_request *rq)
@@ -793,7 +892,7 @@ void intel_rps_boost(struct i915_request *rq)
 	struct intel_rps *rps = &READ_ONCE(rq->engine)->gt->rps;
 	unsigned long flags;
 
-	if (i915_request_signaled(rq) || !READ_ONCE(rps->active))
+	if (i915_request_signaled(rq) || !intel_rps_is_active(rps))
 		return;
 
 	/* Serializes with i915_request_retire() */
@@ -802,6 +901,9 @@ void intel_rps_boost(struct i915_request *rq)
 	    !dma_fence_is_signaled_locked(&rq->fence)) {
 		set_bit(I915_FENCE_FLAG_BOOST, &rq->fence.flags);
 
+		GT_TRACE(rps_to_gt(rps), "boost fence:%llx:%llx\n",
+			 rq->fence.context, rq->fence.seqno);
+
 		if (!atomic_fetch_inc(&rps->num_waiters) &&
 		    READ_ONCE(rps->cur_freq) < rps->boost_freq)
 			schedule_work(&rps->work);
@@ -819,7 +921,7 @@ int intel_rps_set(struct intel_rps *rps, u8 val)
 	GEM_BUG_ON(val > rps->max_freq);
 	GEM_BUG_ON(val < rps->min_freq);
 
-	if (rps->active) {
+	if (intel_rps_is_active(rps)) {
 		err = rps_set(rps, val, true);
 		if (err)
 			return err;
@@ -828,7 +930,7 @@ int intel_rps_set(struct intel_rps *rps, u8 val)
 		 * Make sure we continue to get interrupts
 		 * until we hit the minimum or maximum frequencies.
 		 */
-		if (INTEL_GEN(rps_to_i915(rps)) >= 6) {
+		if (intel_rps_has_interrupts(rps)) {
 			struct intel_uncore *uncore = rps_to_uncore(rps);
 
 			set(uncore,
@@ -896,12 +998,14 @@ static void gen6_rps_init(struct intel_rps *rps)
 
 static bool rps_reset(struct intel_rps *rps)
 {
+	struct drm_i915_private *i915 = rps_to_i915(rps);
+
 	/* force a reset */
 	rps->power.mode = -1;
 	rps->last_freq = -1;
 
 	if (rps_set(rps, rps->min_freq, true)) {
-		DRM_ERROR("Failed to reset RPS to initial values\n");
+		drm_err(&i915->drm, "Failed to reset RPS to initial values\n");
 		return false;
 	}
 
@@ -912,20 +1016,18 @@ static bool rps_reset(struct intel_rps *rps)
 /* See the Gen9_GT_PM_Programming_Guide doc for the below */
 static bool gen9_rps_enable(struct intel_rps *rps)
 {
-	struct drm_i915_private *i915 = rps_to_i915(rps);
-	struct intel_uncore *uncore = rps_to_uncore(rps);
+	struct intel_gt *gt = rps_to_gt(rps);
+	struct intel_uncore *uncore = gt->uncore;
 
 	/* Program defaults and thresholds for RPS */
-	if (IS_GEN(i915, 9))
+	if (IS_GEN(gt->i915, 9))
 		intel_uncore_write_fw(uncore, GEN6_RC_VIDEO_FREQ,
 				      GEN9_FREQUENCY(rps->rp1_freq));
 
-	/* 1 second timeout */
-	intel_uncore_write_fw(uncore, GEN6_RP_DOWN_TIMEOUT,
-			      GT_INTERVAL_FROM_US(i915, 1000000));
-
 	intel_uncore_write_fw(uncore, GEN6_RP_IDLE_HYSTERSIS, 0xa);
 
+	rps->pm_events = GEN6_PM_RP_UP_THRESHOLD | GEN6_PM_RP_DOWN_THRESHOLD;
+
 	return rps_reset(rps);
 }
 
@@ -936,12 +1038,10 @@ static bool gen8_rps_enable(struct intel_rps *rps)
 	intel_uncore_write_fw(uncore, GEN6_RC_VIDEO_FREQ,
 			      HSW_FREQUENCY(rps->rp1_freq));
 
-	/* NB: Docs say 1s, and 1000000 - which aren't equivalent */
-	intel_uncore_write_fw(uncore, GEN6_RP_DOWN_TIMEOUT,
-			      100000000 / 128); /* 1 second timeout */
-
 	intel_uncore_write_fw(uncore, GEN6_RP_IDLE_HYSTERSIS, 10);
 
+	rps->pm_events = GEN6_PM_RP_UP_THRESHOLD | GEN6_PM_RP_DOWN_THRESHOLD;
+
 	return rps_reset(rps);
 }
 
@@ -953,6 +1053,10 @@ static bool gen6_rps_enable(struct intel_rps *rps)
 	intel_uncore_write_fw(uncore, GEN6_RP_DOWN_TIMEOUT, 50000);
 	intel_uncore_write_fw(uncore, GEN6_RP_IDLE_HYSTERSIS, 10);
 
+	rps->pm_events = (GEN6_PM_RP_UP_THRESHOLD |
+			  GEN6_PM_RP_DOWN_THRESHOLD |
+			  GEN6_PM_RP_DOWN_TIMEOUT);
+
 	return rps_reset(rps);
 }
 
@@ -1038,6 +1142,10 @@ static bool chv_rps_enable(struct intel_rps *rps)
 			      GEN6_RP_UP_BUSY_AVG |
 			      GEN6_RP_DOWN_IDLE_AVG);
 
+	rps->pm_events = (GEN6_PM_RP_UP_THRESHOLD |
+			  GEN6_PM_RP_DOWN_THRESHOLD |
+			  GEN6_PM_RP_DOWN_TIMEOUT);
+
 	/* Setting Fixed Bias */
 	vlv_punit_get(i915);
 
@@ -1052,8 +1160,8 @@ static bool chv_rps_enable(struct intel_rps *rps)
 	drm_WARN_ONCE(&i915->drm, (val & GPLLENABLE) == 0,
 		      "GPLL not enabled\n");
 
-	DRM_DEBUG_DRIVER("GPLL enabled? %s\n", yesno(val & GPLLENABLE));
-	DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
+	drm_dbg(&i915->drm, "GPLL enabled? %s\n", yesno(val & GPLLENABLE));
+	drm_dbg(&i915->drm, "GPU status: 0x%08x\n", val);
 
 	return rps_reset(rps);
 }
@@ -1136,6 +1244,9 @@ static bool vlv_rps_enable(struct intel_rps *rps)
 			      GEN6_RP_UP_BUSY_AVG |
 			      GEN6_RP_DOWN_IDLE_CONT);
 
+	/* WaGsvRC0ResidencyMethod:vlv */
+	rps->pm_events = GEN6_PM_RP_UP_EI_EXPIRED;
+
 	vlv_punit_get(i915);
 
 	/* Setting Fixed Bias */
@@ -1150,8 +1261,8 @@ static bool vlv_rps_enable(struct intel_rps *rps)
 	drm_WARN_ONCE(&i915->drm, (val & GPLLENABLE) == 0,
 		      "GPLL not enabled\n");
 
-	DRM_DEBUG_DRIVER("GPLL enabled? %s\n", yesno(val & GPLLENABLE));
-	DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
+	drm_dbg(&i915->drm, "GPLL enabled? %s\n", yesno(val & GPLLENABLE));
+	drm_dbg(&i915->drm, "GPU status: 0x%08x\n", val);
 
 	return rps_reset(rps);
 }
@@ -1194,33 +1305,71 @@ static unsigned long __ips_gfx_val(struct intel_ips *ips)
 	return ips->gfx_power + state2;
 }
 
+static bool has_busy_stats(struct intel_rps *rps)
+{
+	struct intel_engine_cs *engine;
+	enum intel_engine_id id;
+
+	for_each_engine(engine, rps_to_gt(rps), id) {
+		if (!intel_engine_supports_stats(engine))
+			return false;
+	}
+
+	return true;
+}
+
 void intel_rps_enable(struct intel_rps *rps)
 {
 	struct drm_i915_private *i915 = rps_to_i915(rps);
 	struct intel_uncore *uncore = rps_to_uncore(rps);
+	bool enabled = false;
+
+	if (!HAS_RPS(i915))
+		return;
+
+	intel_gt_check_clock_frequency(rps_to_gt(rps));
 
 	intel_uncore_forcewake_get(uncore, FORCEWAKE_ALL);
-	if (IS_CHERRYVIEW(i915))
-		rps->enabled = chv_rps_enable(rps);
+	if (rps->max_freq <= rps->min_freq)
+		/* leave disabled, no room for dynamic reclocking */;
+	else if (IS_CHERRYVIEW(i915))
+		enabled = chv_rps_enable(rps);
 	else if (IS_VALLEYVIEW(i915))
-		rps->enabled = vlv_rps_enable(rps);
+		enabled = vlv_rps_enable(rps);
 	else if (INTEL_GEN(i915) >= 9)
-		rps->enabled = gen9_rps_enable(rps);
+		enabled = gen9_rps_enable(rps);
 	else if (INTEL_GEN(i915) >= 8)
-		rps->enabled = gen8_rps_enable(rps);
+		enabled = gen8_rps_enable(rps);
 	else if (INTEL_GEN(i915) >= 6)
-		rps->enabled = gen6_rps_enable(rps);
+		enabled = gen6_rps_enable(rps);
 	else if (IS_IRONLAKE_M(i915))
-		rps->enabled = gen5_rps_enable(rps);
+		enabled = gen5_rps_enable(rps);
+	else
+		MISSING_CASE(INTEL_GEN(i915));
 	intel_uncore_forcewake_put(uncore, FORCEWAKE_ALL);
-	if (!rps->enabled)
+	if (!enabled)
 		return;
 
-	drm_WARN_ON(&i915->drm, rps->max_freq < rps->min_freq);
-	drm_WARN_ON(&i915->drm, rps->idle_freq > rps->max_freq);
+	GT_TRACE(rps_to_gt(rps),
+		 "min:%x, max:%x, freq:[%d, %d]\n",
+		 rps->min_freq, rps->max_freq,
+		 intel_gpu_freq(rps, rps->min_freq),
+		 intel_gpu_freq(rps, rps->max_freq));
+
+	GEM_BUG_ON(rps->max_freq < rps->min_freq);
+	GEM_BUG_ON(rps->idle_freq > rps->max_freq);
+
+	GEM_BUG_ON(rps->efficient_freq < rps->min_freq);
+	GEM_BUG_ON(rps->efficient_freq > rps->max_freq);
 
-	drm_WARN_ON(&i915->drm, rps->efficient_freq < rps->min_freq);
-	drm_WARN_ON(&i915->drm, rps->efficient_freq > rps->max_freq);
+	if (has_busy_stats(rps))
+		intel_rps_set_timer(rps);
+	else if (INTEL_GEN(i915) >= 6)
+		intel_rps_set_interrupts(rps);
+	else
+		/* Ironlake currently uses intel_ips.ko */ {}
+
+	intel_rps_set_enabled(rps);
 }
 
 static void gen6_rps_disable(struct intel_rps *rps)
@@ -1232,7 +1381,9 @@ void intel_rps_disable(struct intel_rps *rps)
 {
 	struct drm_i915_private *i915 = rps_to_i915(rps);
 
-	rps->enabled = false;
+	intel_rps_clear_enabled(rps);
+	intel_rps_clear_interrupts(rps);
+	intel_rps_clear_timer(rps);
 
 	if (INTEL_GEN(i915) >= 6)
 		gen6_rps_disable(rps);
@@ -1308,7 +1459,8 @@ static void vlv_init_gpll_ref_freq(struct intel_rps *rps)
 				  CCK_GPLL_CLOCK_CONTROL,
 				  i915->czclk_freq);
 
-	DRM_DEBUG_DRIVER("GPLL reference freq: %d kHz\n", rps->gpll_ref_freq);
+	drm_dbg(&i915->drm, "GPLL reference freq: %d kHz\n",
+		rps->gpll_ref_freq);
 }
 
 static void vlv_rps_init(struct intel_rps *rps)
@@ -1336,28 +1488,24 @@ static void vlv_rps_init(struct intel_rps *rps)
 		i915->mem_freq = 1333;
 		break;
 	}
-	DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", i915->mem_freq);
+	drm_dbg(&i915->drm, "DDR speed: %d MHz\n", i915->mem_freq);
 
 	rps->max_freq = vlv_rps_max_freq(rps);
 	rps->rp0_freq = rps->max_freq;
-	DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
-			 intel_gpu_freq(rps, rps->max_freq),
-			 rps->max_freq);
+	drm_dbg(&i915->drm, "max GPU freq: %d MHz (%u)\n",
+		intel_gpu_freq(rps, rps->max_freq), rps->max_freq);
 
 	rps->efficient_freq = vlv_rps_rpe_freq(rps);
-	DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
-			 intel_gpu_freq(rps, rps->efficient_freq),
-			 rps->efficient_freq);
+	drm_dbg(&i915->drm, "RPe GPU freq: %d MHz (%u)\n",
+		intel_gpu_freq(rps, rps->efficient_freq), rps->efficient_freq);
 
 	rps->rp1_freq = vlv_rps_guar_freq(rps);
-	DRM_DEBUG_DRIVER("RP1(Guar Freq) GPU freq: %d MHz (%u)\n",
-			 intel_gpu_freq(rps, rps->rp1_freq),
-			 rps->rp1_freq);
+	drm_dbg(&i915->drm, "RP1(Guar Freq) GPU freq: %d MHz (%u)\n",
+		intel_gpu_freq(rps, rps->rp1_freq), rps->rp1_freq);
 
 	rps->min_freq = vlv_rps_min_freq(rps);
-	DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
-			 intel_gpu_freq(rps, rps->min_freq),
-			 rps->min_freq);
+	drm_dbg(&i915->drm, "min GPU freq: %d MHz (%u)\n",
+		intel_gpu_freq(rps, rps->min_freq), rps->min_freq);
 
 	vlv_iosf_sb_put(i915,
 			BIT(VLV_IOSF_SB_PUNIT) |
@@ -1387,28 +1535,24 @@ static void chv_rps_init(struct intel_rps *rps)
 		i915->mem_freq = 1600;
 		break;
 	}
-	DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", i915->mem_freq);
+	drm_dbg(&i915->drm, "DDR speed: %d MHz\n", i915->mem_freq);
 
 	rps->max_freq = chv_rps_max_freq(rps);
 	rps->rp0_freq = rps->max_freq;
-	DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
-			 intel_gpu_freq(rps, rps->max_freq),
-			 rps->max_freq);
+	drm_dbg(&i915->drm, "max GPU freq: %d MHz (%u)\n",
+		intel_gpu_freq(rps, rps->max_freq), rps->max_freq);
 
 	rps->efficient_freq = chv_rps_rpe_freq(rps);
-	DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
-			 intel_gpu_freq(rps, rps->efficient_freq),
-			 rps->efficient_freq);
+	drm_dbg(&i915->drm, "RPe GPU freq: %d MHz (%u)\n",
+		intel_gpu_freq(rps, rps->efficient_freq), rps->efficient_freq);
 
 	rps->rp1_freq = chv_rps_guar_freq(rps);
-	DRM_DEBUG_DRIVER("RP1(Guar) GPU freq: %d MHz (%u)\n",
-			 intel_gpu_freq(rps, rps->rp1_freq),
-			 rps->rp1_freq);
+	drm_dbg(&i915->drm, "RP1(Guar) GPU freq: %d MHz (%u)\n",
+		intel_gpu_freq(rps, rps->rp1_freq), rps->rp1_freq);
 
 	rps->min_freq = chv_rps_min_freq(rps);
-	DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
-			 intel_gpu_freq(rps, rps->min_freq),
-			 rps->min_freq);
+	drm_dbg(&i915->drm, "min GPU freq: %d MHz (%u)\n",
+		intel_gpu_freq(rps, rps->min_freq), rps->min_freq);
 
 	vlv_iosf_sb_put(i915,
 			BIT(VLV_IOSF_SB_PUNIT) |
@@ -1471,12 +1615,13 @@ static void rps_work(struct work_struct *work)
 {
 	struct intel_rps *rps = container_of(work, typeof(*rps), work);
 	struct intel_gt *gt = rps_to_gt(rps);
+	struct drm_i915_private *i915 = rps_to_i915(rps);
 	bool client_boost = false;
 	int new_freq, adj, min, max;
 	u32 pm_iir = 0;
 
 	spin_lock_irq(&gt->irq_lock);
-	pm_iir = fetch_and_zero(&rps->pm_iir) & READ_ONCE(rps->pm_events);
+	pm_iir = fetch_and_zero(&rps->pm_iir) & rps->pm_events;
 	client_boost = atomic_read(&rps->num_waiters);
 	spin_unlock_irq(&gt->irq_lock);
 
@@ -1485,6 +1630,10 @@ static void rps_work(struct work_struct *work)
 		goto out;
 
 	mutex_lock(&rps->lock);
+	if (!intel_rps_is_active(rps)) {
+		mutex_unlock(&rps->lock);
+		return;
+	}
 
 	pm_iir |= vlv_wa_c0_ei(rps, pm_iir);
 
@@ -1494,6 +1643,12 @@ static void rps_work(struct work_struct *work)
 	max = rps->max_freq_softlimit;
 	if (client_boost)
 		max = rps->max_freq;
+
+	GT_TRACE(gt,
+		 "pm_iir:%x, client_boost:%s, last:%d, cur:%x, min:%x, max:%x\n",
+		 pm_iir, yesno(client_boost),
+		 adj, new_freq, min, max);
+
 	if (client_boost && new_freq < rps->boost_freq) {
 		new_freq = rps->boost_freq;
 		adj = 0;
@@ -1525,30 +1680,18 @@ static void rps_work(struct work_struct *work)
 		adj = 0;
 	}
 
-	rps->last_adj = adj;
-
 	/*
-	 * Limit deboosting and boosting to keep ourselves at the extremes
-	 * when in the respective power modes (i.e. slowly decrease frequencies
-	 * while in the HIGH_POWER zone and slowly increase frequencies while
-	 * in the LOW_POWER zone). On idle, we will hit the timeout and drop
-	 * to the next level quickly, and conversely if busy we expect to
-	 * hit a waitboost and rapidly switch into max power.
-	 */
-	if ((adj < 0 && rps->power.mode == HIGH_POWER) ||
-	    (adj > 0 && rps->power.mode == LOW_POWER))
-		rps->last_adj = 0;
-
-	/* sysfs frequency interfaces may have snuck in while servicing the
-	 * interrupt
+	 * sysfs frequency limits may have snuck in while
+	 * servicing the interrupt
 	 */
 	new_freq += adj;
 	new_freq = clamp_t(int, new_freq, min, max);
 
 	if (intel_rps_set(rps, new_freq)) {
-		DRM_DEBUG_DRIVER("Failed to set new GPU frequency\n");
-		rps->last_adj = 0;
+		drm_dbg(&i915->drm, "Failed to set new GPU frequency\n");
+		adj = 0;
 	}
+	rps->last_adj = adj;
 
 	mutex_unlock(&rps->lock);
 
@@ -1568,6 +1711,8 @@ void gen11_rps_irq_handler(struct intel_rps *rps, u32 pm_iir)
 	if (unlikely(!events))
 		return;
 
+	GT_TRACE(gt, "irq events:%x\n", events);
+
 	gen6_gt_pm_mask_irq(gt, events);
 
 	rps->pm_iir |= events;
@@ -1579,10 +1724,12 @@ void gen6_rps_irq_handler(struct intel_rps *rps, u32 pm_iir)
 	struct intel_gt *gt = rps_to_gt(rps);
 	u32 events;
 
-	events = pm_iir & READ_ONCE(rps->pm_events);
+	events = pm_iir & rps->pm_events;
 	if (events) {
 		spin_lock(&gt->irq_lock);
 
+		GT_TRACE(gt, "irq events:%x\n", events);
+
 		gen6_gt_pm_mask_irq(gt, events);
 		rps->pm_iir |= events;
 
@@ -1640,6 +1787,7 @@ void intel_rps_init_early(struct intel_rps *rps)
 	mutex_init(&rps->power.mutex);
 
 	INIT_WORK(&rps->work, rps_work);
+	timer_setup(&rps->timer, rps_timer, 0);
 
 	atomic_set(&rps->num_waiters, 0);
 }
@@ -1668,9 +1816,10 @@ void intel_rps_init(struct intel_rps *rps)
 		sandybridge_pcode_read(i915, GEN6_READ_OC_PARAMS,
 				       &params, NULL);
 		if (params & BIT(31)) { /* OC supported */
-			DRM_DEBUG_DRIVER("Overclocking supported, max: %dMHz, overclock: %dMHz\n",
-					 (rps->max_freq & 0xff) * 50,
-					 (params & 0xff) * 50);
+			drm_dbg(&i915->drm,
+				"Overclocking supported, max: %dMHz, overclock: %dMHz\n",
+				(rps->max_freq & 0xff) * 50,
+				(params & 0xff) * 50);
 			rps->max_freq = params & 0xff;
 		}
 	}
@@ -1678,7 +1827,9 @@ void intel_rps_init(struct intel_rps *rps)
 	/* Finally allow us to boost to max by default */
 	rps->boost_freq = rps->max_freq;
 	rps->idle_freq = rps->min_freq;
-	rps->cur_freq = rps->idle_freq;
+
+	/* Start in the middle, from here we will autotune based on workload */
+	rps->cur_freq = rps->efficient_freq;
 
 	rps->pm_intrmsk_mbz = 0;
 
@@ -1693,6 +1844,9 @@ void intel_rps_init(struct intel_rps *rps)
 
 	if (INTEL_GEN(i915) >= 8 && INTEL_GEN(i915) < 11)
 		rps->pm_intrmsk_mbz |= GEN8_PMINTR_DISABLE_REDIRECT_TO_GUC;
+
+	if (INTEL_GEN(i915) >= 6)
+		rps_disable_interrupts(rps);
 }
 
 u32 intel_rps_get_cagf(struct intel_rps *rps, u32 rpstat)
@@ -1722,7 +1876,7 @@ static u32 read_cagf(struct intel_rps *rps)
 		freq = vlv_punit_read(i915, PUNIT_REG_GPU_FREQ_STS);
 		vlv_punit_put(i915);
 	} else {
-		freq = intel_uncore_read(rps_to_gt(rps)->uncore, GEN6_RPSTAT1);
+		freq = intel_uncore_read(rps_to_uncore(rps), GEN6_RPSTAT1);
 	}
 
 	return intel_rps_get_cagf(rps, freq);
@@ -1730,7 +1884,7 @@ static u32 read_cagf(struct intel_rps *rps)
 
 u32 intel_rps_read_actual_frequency(struct intel_rps *rps)
 {
-	struct intel_runtime_pm *rpm = rps_to_gt(rps)->uncore->rpm;
+	struct intel_runtime_pm *rpm = rps_to_uncore(rps)->rpm;
 	intel_wakeref_t wakeref;
 	u32 freq = 0;
 
@@ -1930,3 +2084,7 @@ bool i915_gpu_turbo_disable(void)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
+
+#if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
+#include "selftest_rps.c"
+#endif
diff --git a/drivers/gpu/drm/i915/gt/intel_rps.h b/drivers/gpu/drm/i915/gt/intel_rps.h
index dfa98194f3b2..af07fa5b7584 100644
--- a/drivers/gpu/drm/i915/gt/intel_rps.h
+++ b/drivers/gpu/drm/i915/gt/intel_rps.h
@@ -36,4 +36,64 @@ void gen5_rps_irq_handler(struct intel_rps *rps);
 void gen6_rps_irq_handler(struct intel_rps *rps, u32 pm_iir);
 void gen11_rps_irq_handler(struct intel_rps *rps, u32 pm_iir);
 
+static inline bool intel_rps_is_enabled(const struct intel_rps *rps)
+{
+	return test_bit(INTEL_RPS_ENABLED, &rps->flags);
+}
+
+static inline void intel_rps_set_enabled(struct intel_rps *rps)
+{
+	set_bit(INTEL_RPS_ENABLED, &rps->flags);
+}
+
+static inline void intel_rps_clear_enabled(struct intel_rps *rps)
+{
+	clear_bit(INTEL_RPS_ENABLED, &rps->flags);
+}
+
+static inline bool intel_rps_is_active(const struct intel_rps *rps)
+{
+	return test_bit(INTEL_RPS_ACTIVE, &rps->flags);
+}
+
+static inline void intel_rps_set_active(struct intel_rps *rps)
+{
+	set_bit(INTEL_RPS_ACTIVE, &rps->flags);
+}
+
+static inline bool intel_rps_clear_active(struct intel_rps *rps)
+{
+	return test_and_clear_bit(INTEL_RPS_ACTIVE, &rps->flags);
+}
+
+static inline bool intel_rps_has_interrupts(const struct intel_rps *rps)
+{
+	return test_bit(INTEL_RPS_INTERRUPTS, &rps->flags);
+}
+
+static inline void intel_rps_set_interrupts(struct intel_rps *rps)
+{
+	set_bit(INTEL_RPS_INTERRUPTS, &rps->flags);
+}
+
+static inline void intel_rps_clear_interrupts(struct intel_rps *rps)
+{
+	clear_bit(INTEL_RPS_INTERRUPTS, &rps->flags);
+}
+
+static inline bool intel_rps_uses_timer(const struct intel_rps *rps)
+{
+	return test_bit(INTEL_RPS_TIMER, &rps->flags);
+}
+
+static inline void intel_rps_set_timer(struct intel_rps *rps)
+{
+	set_bit(INTEL_RPS_TIMER, &rps->flags);
+}
+
+static inline void intel_rps_clear_timer(struct intel_rps *rps)
+{
+	clear_bit(INTEL_RPS_TIMER, &rps->flags);
+}
+
 #endif /* INTEL_RPS_H */
diff --git a/drivers/gpu/drm/i915/gt/intel_rps_types.h b/drivers/gpu/drm/i915/gt/intel_rps_types.h
index c2e279154bd5..38083f0402d9 100644
--- a/drivers/gpu/drm/i915/gt/intel_rps_types.h
+++ b/drivers/gpu/drm/i915/gt/intel_rps_types.h
@@ -31,6 +31,13 @@ struct intel_rps_ei {
 	u32 media_c0;
 };
 
+enum {
+	INTEL_RPS_ENABLED = 0,
+	INTEL_RPS_ACTIVE,
+	INTEL_RPS_INTERRUPTS,
+	INTEL_RPS_TIMER,
+};
+
 struct intel_rps {
 	struct mutex lock; /* protects enabling and the worker */
 
@@ -38,9 +45,12 @@ struct intel_rps {
 	 * work, interrupts_enabled and pm_iir are protected by
 	 * dev_priv->irq_lock
 	 */
+	struct timer_list timer;
 	struct work_struct work;
-	bool enabled;
-	bool active;
+	unsigned long flags;
+
+	ktime_t pm_timestamp;
+	u32 pm_interval;
 	u32 pm_iir;
 
 	/* PM interrupt bits that should never be masked */
diff --git a/drivers/gpu/drm/i915/gt/intel_sseu.c b/drivers/gpu/drm/i915/gt/intel_sseu.c
index 74f793423231..d173271c7397 100644
--- a/drivers/gpu/drm/i915/gt/intel_sseu.c
+++ b/drivers/gpu/drm/i915/gt/intel_sseu.c
@@ -65,7 +65,6 @@ u32 intel_sseu_make_rpcs(struct drm_i915_private *i915,
 {
 	const struct sseu_dev_info *sseu = &RUNTIME_INFO(i915)->sseu;
 	bool subslice_pg = sseu->has_subslice_pg;
-	struct intel_sseu ctx_sseu;
 	u8 slices, subslices;
 	u32 rpcs = 0;
 
@@ -78,31 +77,13 @@ u32 intel_sseu_make_rpcs(struct drm_i915_private *i915,
 
 	/*
 	 * If i915/perf is active, we want a stable powergating configuration
-	 * on the system.
-	 *
-	 * We could choose full enablement, but on ICL we know there are use
-	 * cases which disable slices for functional, apart for performance
-	 * reasons. So in this case we select a known stable subset.
+	 * on the system. Use the configuration pinned by i915/perf.
 	 */
-	if (!i915->perf.exclusive_stream) {
-		ctx_sseu = *req_sseu;
-	} else {
-		ctx_sseu = intel_sseu_from_device_info(sseu);
-
-		if (IS_GEN(i915, 11)) {
-			/*
-			 * We only need subslice count so it doesn't matter
-			 * which ones we select - just turn off low bits in the
-			 * amount of half of all available subslices per slice.
-			 */
-			ctx_sseu.subslice_mask =
-				~(~0 << (hweight8(ctx_sseu.subslice_mask) / 2));
-			ctx_sseu.slice_mask = 0x1;
-		}
-	}
+	if (i915->perf.exclusive_stream)
+		req_sseu = &i915->perf.sseu;
 
-	slices = hweight8(ctx_sseu.slice_mask);
-	subslices = hweight8(ctx_sseu.subslice_mask);
+	slices = hweight8(req_sseu->slice_mask);
+	subslices = hweight8(req_sseu->subslice_mask);
 
 	/*
 	 * Since the SScount bitfield in GEN8_R_PWR_CLK_STATE is only three bits
@@ -175,13 +156,13 @@ u32 intel_sseu_make_rpcs(struct drm_i915_private *i915,
 	if (sseu->has_eu_pg) {
 		u32 val;
 
-		val = ctx_sseu.min_eus_per_subslice << GEN8_RPCS_EU_MIN_SHIFT;
+		val = req_sseu->min_eus_per_subslice << GEN8_RPCS_EU_MIN_SHIFT;
 		GEM_BUG_ON(val & ~GEN8_RPCS_EU_MIN_MASK);
 		val &= GEN8_RPCS_EU_MIN_MASK;
 
 		rpcs |= val;
 
-		val = ctx_sseu.max_eus_per_subslice << GEN8_RPCS_EU_MAX_SHIFT;
+		val = req_sseu->max_eus_per_subslice << GEN8_RPCS_EU_MAX_SHIFT;
 		GEM_BUG_ON(val & ~GEN8_RPCS_EU_MAX_MASK);
 		val &= GEN8_RPCS_EU_MAX_MASK;
 
diff --git a/drivers/gpu/drm/i915/gt/intel_timeline.c b/drivers/gpu/drm/i915/gt/intel_timeline.c
index 91debbc97c9a..e1fac1b38f27 100644
--- a/drivers/gpu/drm/i915/gt/intel_timeline.c
+++ b/drivers/gpu/drm/i915/gt/intel_timeline.c
@@ -119,6 +119,15 @@ static void __idle_hwsp_free(struct intel_timeline_hwsp *hwsp, int cacheline)
 	spin_unlock_irqrestore(&gt->hwsp_lock, flags);
 }
 
+static void __rcu_cacheline_free(struct rcu_head *rcu)
+{
+	struct intel_timeline_cacheline *cl =
+		container_of(rcu, typeof(*cl), rcu);
+
+	i915_active_fini(&cl->active);
+	kfree(cl);
+}
+
 static void __idle_cacheline_free(struct intel_timeline_cacheline *cl)
 {
 	GEM_BUG_ON(!i915_active_is_idle(&cl->active));
@@ -127,8 +136,7 @@ static void __idle_cacheline_free(struct intel_timeline_cacheline *cl)
 	i915_vma_put(cl->hwsp->vma);
 	__idle_hwsp_free(cl->hwsp, ptr_unmask_bits(cl->vaddr, CACHELINE_BITS));
 
-	i915_active_fini(&cl->active);
-	kfree_rcu(cl, rcu);
+	call_rcu(&cl->rcu, __rcu_cacheline_free);
 }
 
 __i915_active_call
@@ -329,6 +337,13 @@ int intel_timeline_pin(struct intel_timeline *tl)
 	return 0;
 }
 
+void intel_timeline_reset_seqno(const struct intel_timeline *tl)
+{
+	/* Must be pinned to be writable, and no requests in flight. */
+	GEM_BUG_ON(!atomic_read(&tl->pin_count));
+	WRITE_ONCE(*(u32 *)tl->hwsp_seqno, tl->seqno);
+}
+
 void intel_timeline_enter(struct intel_timeline *tl)
 {
 	struct intel_gt_timelines *timelines = &tl->gt->timelines;
@@ -357,8 +372,16 @@ void intel_timeline_enter(struct intel_timeline *tl)
 		return;
 
 	spin_lock(&timelines->lock);
-	if (!atomic_fetch_inc(&tl->active_count))
+	if (!atomic_fetch_inc(&tl->active_count)) {
+		/*
+		 * The HWSP is volatile, and may have been lost while inactive,
+		 * e.g. across suspend/resume. Be paranoid, and ensure that
+		 * the HWSP value matches our seqno so we don't proclaim
+		 * the next request as already complete.
+		 */
+		intel_timeline_reset_seqno(tl);
 		list_add_tail(&tl->link, &timelines->active_list);
+	}
 	spin_unlock(&timelines->lock);
 }
 
@@ -521,6 +544,8 @@ int intel_timeline_read_hwsp(struct i915_request *from,
 
 	rcu_read_lock();
 	cl = rcu_dereference(from->hwsp_cacheline);
+	if (i915_request_completed(from)) /* confirm cacheline is valid */
+		goto unlock;
 	if (unlikely(!i915_active_acquire_if_busy(&cl->active)))
 		goto unlock; /* seqno wrapped and completed! */
 	if (unlikely(i915_request_completed(from)))
diff --git a/drivers/gpu/drm/i915/gt/intel_timeline.h b/drivers/gpu/drm/i915/gt/intel_timeline.h
index f5b7eade3809..c8e59a333182 100644
--- a/drivers/gpu/drm/i915/gt/intel_timeline.h
+++ b/drivers/gpu/drm/i915/gt/intel_timeline.h
@@ -84,6 +84,8 @@ int intel_timeline_get_seqno(struct intel_timeline *tl,
 void intel_timeline_exit(struct intel_timeline *tl);
 void intel_timeline_unpin(struct intel_timeline *tl);
 
+void intel_timeline_reset_seqno(const struct intel_timeline *tl);
+
 int intel_timeline_read_hwsp(struct i915_request *from,
 			     struct i915_request *until,
 			     u32 *hwsp_offset);
diff --git a/drivers/gpu/drm/i915/gt/intel_workarounds.c b/drivers/gpu/drm/i915/gt/intel_workarounds.c
index 5176ad1a3976..adddc5c93b48 100644
--- a/drivers/gpu/drm/i915/gt/intel_workarounds.c
+++ b/drivers/gpu/drm/i915/gt/intel_workarounds.c
@@ -837,7 +837,7 @@ wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)
 			intel_uncore_read(&i915->uncore, GEN10_MIRROR_FUSE3) &
 			GEN10_L3BANK_MASK;
 
-		DRM_DEBUG_DRIVER("L3 fuse = %x\n", l3_fuse);
+		drm_dbg(&i915->drm, "L3 fuse = %x\n", l3_fuse);
 		l3_en = ~(l3_fuse << GEN10_L3BANK_PAIR_COUNT | l3_fuse);
 	} else {
 		l3_en = ~0;
@@ -846,7 +846,8 @@ wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)
 	slice = fls(sseu->slice_mask) - 1;
 	subslice = fls(l3_en & intel_sseu_get_subslices(sseu, slice));
 	if (!subslice) {
-		DRM_WARN("No common index found between subslice mask %x and L3 bank mask %x!\n",
+		drm_warn(&i915->drm,
+			 "No common index found between subslice mask %x and L3 bank mask %x!\n",
 			 intel_sseu_get_subslices(sseu, slice), l3_en);
 		subslice = fls(l3_en);
 		drm_WARN_ON(&i915->drm, !subslice);
@@ -861,7 +862,7 @@ wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)
 		mcr_mask = GEN8_MCR_SLICE_MASK | GEN8_MCR_SUBSLICE_MASK;
 	}
 
-	DRM_DEBUG_DRIVER("MCR slice/subslice = %x\n", mcr);
+	drm_dbg(&i915->drm, "MCR slice/subslice = %x\n", mcr);
 
 	wa_write_masked_or(wal, GEN8_MCR_SELECTOR, mcr_mask, mcr);
 }
@@ -942,6 +943,8 @@ icl_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal)
 static void
 tgl_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal)
 {
+	wa_init_mcr(i915, wal);
+
 	/* Wa_1409420604:tgl */
 	if (IS_TGL_REVID(i915, TGL_REVID_A0, TGL_REVID_A0))
 		wa_write_or(wal,
@@ -1379,12 +1382,6 @@ rcs_engine_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal)
 			    GEN7_FF_THREAD_MODE,
 			    GEN12_FF_TESSELATION_DOP_GATE_DISABLE);
 
-		/*
-		 * Wa_1409085225:tgl
-		 * Wa_14010229206:tgl
-		 */
-		wa_masked_en(wal, GEN9_ROW_CHICKEN4, GEN12_DISABLE_TDL_PUSH);
-
 		/* Wa_1408615072:tgl */
 		wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE2,
 			    VSUNIT_CLKGATE_DIS_TGL);
@@ -1402,6 +1399,12 @@ rcs_engine_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal)
 		wa_masked_en(wal,
 			     GEN9_CS_DEBUG_MODE1,
 			     FF_DOP_CLOCK_GATE_DISABLE);
+
+		/*
+		 * Wa_1409085225:tgl
+		 * Wa_14010229206:tgl
+		 */
+		wa_masked_en(wal, GEN9_ROW_CHICKEN4, GEN12_DISABLE_TDL_PUSH);
 	}
 
 	if (IS_GEN(i915, 11)) {
diff --git a/drivers/gpu/drm/i915/gt/selftest_context.c b/drivers/gpu/drm/i915/gt/selftest_context.c
index e874dfaa5316..b8ed3cbe1277 100644
--- a/drivers/gpu/drm/i915/gt/selftest_context.c
+++ b/drivers/gpu/drm/i915/gt/selftest_context.c
@@ -155,7 +155,7 @@ static int live_context_size(void *arg)
 
 	for_each_engine(engine, gt, id) {
 		struct {
-			struct drm_i915_gem_object *state;
+			struct file *state;
 			void *pinned;
 		} saved;
 
diff --git a/drivers/gpu/drm/i915/gt/selftest_gt_pm.c b/drivers/gpu/drm/i915/gt/selftest_gt_pm.c
index 09ff8e4f88af..242181a5214c 100644
--- a/drivers/gpu/drm/i915/gt/selftest_gt_pm.c
+++ b/drivers/gpu/drm/i915/gt/selftest_gt_pm.c
@@ -7,6 +7,7 @@
 
 #include "selftest_llc.h"
 #include "selftest_rc6.h"
+#include "selftest_rps.h"
 
 static int live_gt_resume(void *arg)
 {
@@ -52,6 +53,13 @@ int intel_gt_pm_live_selftests(struct drm_i915_private *i915)
 {
 	static const struct i915_subtest tests[] = {
 		SUBTEST(live_rc6_manual),
+		SUBTEST(live_rps_clock_interval),
+		SUBTEST(live_rps_control),
+		SUBTEST(live_rps_frequency_cs),
+		SUBTEST(live_rps_frequency_srm),
+		SUBTEST(live_rps_power),
+		SUBTEST(live_rps_interrupt),
+		SUBTEST(live_rps_dynamic),
 		SUBTEST(live_gt_resume),
 	};
 
diff --git a/drivers/gpu/drm/i915/gt/selftest_lrc.c b/drivers/gpu/drm/i915/gt/selftest_lrc.c
index 6f06ba750a0a..7529df92f6a2 100644
--- a/drivers/gpu/drm/i915/gt/selftest_lrc.c
+++ b/drivers/gpu/drm/i915/gt/selftest_lrc.c
@@ -21,7 +21,8 @@
 #include "gem/selftests/mock_context.h"
 
 #define CS_GPR(engine, n) ((engine)->mmio_base + 0x600 + (n) * 4)
-#define NUM_GPR_DW (16 * 2) /* each GPR is 2 dwords */
+#define NUM_GPR 16
+#define NUM_GPR_DW (NUM_GPR * 2) /* each GPR is 2 dwords */
 
 static struct i915_vma *create_scratch(struct intel_gt *gt)
 {
@@ -68,26 +69,41 @@ static void engine_heartbeat_enable(struct intel_engine_cs *engine,
 	engine->props.heartbeat_interval_ms = saved;
 }
 
+static bool is_active(struct i915_request *rq)
+{
+	if (i915_request_is_active(rq))
+		return true;
+
+	if (i915_request_on_hold(rq))
+		return true;
+
+	if (i915_request_started(rq))
+		return true;
+
+	return false;
+}
+
 static int wait_for_submit(struct intel_engine_cs *engine,
 			   struct i915_request *rq,
 			   unsigned long timeout)
 {
 	timeout += jiffies;
 	do {
-		cond_resched();
-		intel_engine_flush_submission(engine);
+		bool done = time_after(jiffies, timeout);
 
-		if (READ_ONCE(engine->execlists.pending[0]))
-			continue;
-
-		if (i915_request_is_active(rq))
+		if (i915_request_completed(rq)) /* that was quick! */
 			return 0;
 
-		if (i915_request_started(rq)) /* that was quick! */
+		/* Wait until the HW has acknowleged the submission (or err) */
+		intel_engine_flush_submission(engine);
+		if (!READ_ONCE(engine->execlists.pending[0]) && is_active(rq))
 			return 0;
-	} while (time_before(jiffies, timeout));
 
-	return -ETIME;
+		if (done)
+			return -ETIME;
+
+		cond_resched();
+	} while (1);
 }
 
 static int wait_for_reset(struct intel_engine_cs *engine,
@@ -634,9 +650,9 @@ static int live_error_interrupt(void *arg)
 						 error_repr(p->error[i]));
 
 				if (!i915_request_started(client[i])) {
-					pr_debug("%s: %s request not stated!\n",
-						 engine->name,
-						 error_repr(p->error[i]));
+					pr_err("%s: %s request not started!\n",
+					       engine->name,
+					       error_repr(p->error[i]));
 					err = -ETIME;
 					goto out;
 				}
@@ -644,9 +660,10 @@ static int live_error_interrupt(void *arg)
 				/* Kick the tasklet to process the error */
 				intel_engine_flush_submission(engine);
 				if (client[i]->fence.error != p->error[i]) {
-					pr_err("%s: %s request completed with wrong error code: %d\n",
+					pr_err("%s: %s request (%s) with wrong error code: %d\n",
 					       engine->name,
 					       error_repr(p->error[i]),
+					       i915_request_completed(client[i]) ? "completed" : "running",
 					       client[i]->fence.error);
 					err = -EINVAL;
 					goto out;
@@ -929,7 +946,7 @@ create_rewinder(struct intel_context *ce,
 			goto err;
 	}
 
-	cs = intel_ring_begin(rq, 10);
+	cs = intel_ring_begin(rq, 14);
 	if (IS_ERR(cs)) {
 		err = PTR_ERR(cs);
 		goto err;
@@ -941,8 +958,8 @@ create_rewinder(struct intel_context *ce,
 	*cs++ = MI_SEMAPHORE_WAIT |
 		MI_SEMAPHORE_GLOBAL_GTT |
 		MI_SEMAPHORE_POLL |
-		MI_SEMAPHORE_SAD_NEQ_SDD;
-	*cs++ = 0;
+		MI_SEMAPHORE_SAD_GTE_SDD;
+	*cs++ = idx;
 	*cs++ = offset;
 	*cs++ = 0;
 
@@ -951,6 +968,11 @@ create_rewinder(struct intel_context *ce,
 	*cs++ = offset + idx * sizeof(u32);
 	*cs++ = 0;
 
+	*cs++ = MI_STORE_DWORD_IMM_GEN4 | MI_USE_GGTT;
+	*cs++ = offset;
+	*cs++ = 0;
+	*cs++ = idx + 1;
+
 	intel_ring_advance(rq, cs);
 
 	rq->sched.attr.priority = I915_PRIORITY_MASK;
@@ -984,7 +1006,7 @@ static int live_timeslice_rewind(void *arg)
 
 	for_each_engine(engine, gt, id) {
 		enum { A1, A2, B1 };
-		enum { X = 1, Y, Z };
+		enum { X = 1, Z, Y };
 		struct i915_request *rq[3] = {};
 		struct intel_context *ce;
 		unsigned long heartbeat;
@@ -1017,13 +1039,13 @@ static int live_timeslice_rewind(void *arg)
 			goto err;
 		}
 
-		rq[0] = create_rewinder(ce, NULL, slot, 1);
+		rq[0] = create_rewinder(ce, NULL, slot, X);
 		if (IS_ERR(rq[0])) {
 			intel_context_put(ce);
 			goto err;
 		}
 
-		rq[1] = create_rewinder(ce, NULL, slot, 2);
+		rq[1] = create_rewinder(ce, NULL, slot, Y);
 		intel_context_put(ce);
 		if (IS_ERR(rq[1]))
 			goto err;
@@ -1041,7 +1063,7 @@ static int live_timeslice_rewind(void *arg)
 			goto err;
 		}
 
-		rq[2] = create_rewinder(ce, rq[0], slot, 3);
+		rq[2] = create_rewinder(ce, rq[0], slot, Z);
 		intel_context_put(ce);
 		if (IS_ERR(rq[2]))
 			goto err;
@@ -1052,18 +1074,14 @@ static int live_timeslice_rewind(void *arg)
 			       engine->name);
 			goto err;
 		}
-		GEM_BUG_ON(!timer_pending(&engine->execlists.timer));
 
 		/* ELSP[] = { { A:rq1, A:rq2 }, { B:rq1 } } */
-		GEM_BUG_ON(!i915_request_is_active(rq[A1]));
-		GEM_BUG_ON(!i915_request_is_active(rq[A2]));
-		GEM_BUG_ON(!i915_request_is_active(rq[B1]));
-
-		/* Wait for the timeslice to kick in */
-		del_timer(&engine->execlists.timer);
-		tasklet_hi_schedule(&engine->execlists.tasklet);
-		intel_engine_flush_submission(engine);
-
+		if (i915_request_is_active(rq[A2])) { /* semaphore yielded! */
+			/* Wait for the timeslice to kick in */
+			del_timer(&engine->execlists.timer);
+			tasklet_hi_schedule(&engine->execlists.tasklet);
+			intel_engine_flush_submission(engine);
+		}
 		/* -> ELSP[] = { { A:rq1 }, { B:rq1 } } */
 		GEM_BUG_ON(!i915_request_is_active(rq[A1]));
 		GEM_BUG_ON(!i915_request_is_active(rq[B1]));
@@ -1228,8 +1246,14 @@ static int live_timeslice_queue(void *arg)
 		if (err)
 			goto err_rq;
 
-		intel_engine_flush_submission(engine);
+		/* Wait until we ack the release_queue and start timeslicing */
+		do {
+			cond_resched();
+			intel_engine_flush_submission(engine);
+		} while (READ_ONCE(engine->execlists.pending[0]));
+
 		if (!READ_ONCE(engine->execlists.timer.expires) &&
+		    execlists_active(&engine->execlists) == rq &&
 		    !i915_request_completed(rq)) {
 			struct drm_printer p =
 				drm_info_printer(gt->i915->drm.dev);
@@ -2030,6 +2054,9 @@ static int __cancel_hostile(struct live_preempt_cancel *arg)
 	if (!IS_ACTIVE(CONFIG_DRM_I915_PREEMPT_TIMEOUT))
 		return 0;
 
+	if (!intel_has_reset_engine(arg->engine->gt))
+		return 0;
+
 	GEM_TRACE("%s(%s)\n", __func__, arg->engine->name);
 	rq = spinner_create_request(&arg->a.spin,
 				    arg->a.ctx, arg->engine,
@@ -2630,7 +2657,7 @@ static int create_gang(struct intel_engine_cs *engine,
 	if (IS_ERR(rq))
 		goto err_obj;
 
-	rq->batch = vma;
+	rq->batch = i915_vma_get(vma);
 	i915_request_get(rq);
 
 	i915_vma_lock(vma);
@@ -2654,6 +2681,7 @@ static int create_gang(struct intel_engine_cs *engine,
 	return 0;
 
 err_rq:
+	i915_vma_put(rq->batch);
 	i915_request_put(rq);
 err_obj:
 	i915_gem_object_put(obj);
@@ -2750,6 +2778,7 @@ static int live_preempt_gang(void *arg)
 				err = -ETIME;
 			}
 
+			i915_vma_put(rq->batch);
 			i915_request_put(rq);
 			rq = n;
 		}
@@ -2763,6 +2792,331 @@ static int live_preempt_gang(void *arg)
 	return 0;
 }
 
+static struct i915_vma *
+create_gpr_user(struct intel_engine_cs *engine,
+		struct i915_vma *result,
+		unsigned int offset)
+{
+	struct drm_i915_gem_object *obj;
+	struct i915_vma *vma;
+	u32 *cs;
+	int err;
+	int i;
+
+	obj = i915_gem_object_create_internal(engine->i915, 4096);
+	if (IS_ERR(obj))
+		return ERR_CAST(obj);
+
+	vma = i915_vma_instance(obj, result->vm, NULL);
+	if (IS_ERR(vma)) {
+		i915_gem_object_put(obj);
+		return vma;
+	}
+
+	err = i915_vma_pin(vma, 0, 0, PIN_USER);
+	if (err) {
+		i915_vma_put(vma);
+		return ERR_PTR(err);
+	}
+
+	cs = i915_gem_object_pin_map(obj, I915_MAP_WC);
+	if (IS_ERR(cs)) {
+		i915_vma_put(vma);
+		return ERR_CAST(cs);
+	}
+
+	/* All GPR are clear for new contexts. We use GPR(0) as a constant */
+	*cs++ = MI_LOAD_REGISTER_IMM(1);
+	*cs++ = CS_GPR(engine, 0);
+	*cs++ = 1;
+
+	for (i = 1; i < NUM_GPR; i++) {
+		u64 addr;
+
+		/*
+		 * Perform: GPR[i]++
+		 *
+		 * As we read and write into the context saved GPR[i], if
+		 * we restart this batch buffer from an earlier point, we
+		 * will repeat the increment and store a value > 1.
+		 */
+		*cs++ = MI_MATH(4);
+		*cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCA, MI_MATH_REG(i));
+		*cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCB, MI_MATH_REG(0));
+		*cs++ = MI_MATH_ADD;
+		*cs++ = MI_MATH_STORE(MI_MATH_REG(i), MI_MATH_REG_ACCU);
+
+		addr = result->node.start + offset + i * sizeof(*cs);
+		*cs++ = MI_STORE_REGISTER_MEM_GEN8;
+		*cs++ = CS_GPR(engine, 2 * i);
+		*cs++ = lower_32_bits(addr);
+		*cs++ = upper_32_bits(addr);
+
+		*cs++ = MI_SEMAPHORE_WAIT |
+			MI_SEMAPHORE_POLL |
+			MI_SEMAPHORE_SAD_GTE_SDD;
+		*cs++ = i;
+		*cs++ = lower_32_bits(result->node.start);
+		*cs++ = upper_32_bits(result->node.start);
+	}
+
+	*cs++ = MI_BATCH_BUFFER_END;
+	i915_gem_object_flush_map(obj);
+	i915_gem_object_unpin_map(obj);
+
+	return vma;
+}
+
+static struct i915_vma *create_global(struct intel_gt *gt, size_t sz)
+{
+	struct drm_i915_gem_object *obj;
+	struct i915_vma *vma;
+	int err;
+
+	obj = i915_gem_object_create_internal(gt->i915, sz);
+	if (IS_ERR(obj))
+		return ERR_CAST(obj);
+
+	vma = i915_vma_instance(obj, &gt->ggtt->vm, NULL);
+	if (IS_ERR(vma)) {
+		i915_gem_object_put(obj);
+		return vma;
+	}
+
+	err = i915_ggtt_pin(vma, 0, 0);
+	if (err) {
+		i915_vma_put(vma);
+		return ERR_PTR(err);
+	}
+
+	return vma;
+}
+
+static struct i915_request *
+create_gpr_client(struct intel_engine_cs *engine,
+		  struct i915_vma *global,
+		  unsigned int offset)
+{
+	struct i915_vma *batch, *vma;
+	struct intel_context *ce;
+	struct i915_request *rq;
+	int err;
+
+	ce = intel_context_create(engine);
+	if (IS_ERR(ce))
+		return ERR_CAST(ce);
+
+	vma = i915_vma_instance(global->obj, ce->vm, NULL);
+	if (IS_ERR(vma)) {
+		err = PTR_ERR(vma);
+		goto out_ce;
+	}
+
+	err = i915_vma_pin(vma, 0, 0, PIN_USER);
+	if (err)
+		goto out_ce;
+
+	batch = create_gpr_user(engine, vma, offset);
+	if (IS_ERR(batch)) {
+		err = PTR_ERR(batch);
+		goto out_vma;
+	}
+
+	rq = intel_context_create_request(ce);
+	if (IS_ERR(rq)) {
+		err = PTR_ERR(rq);
+		goto out_batch;
+	}
+
+	i915_vma_lock(vma);
+	err = i915_request_await_object(rq, vma->obj, false);
+	if (!err)
+		err = i915_vma_move_to_active(vma, rq, 0);
+	i915_vma_unlock(vma);
+
+	i915_vma_lock(batch);
+	if (!err)
+		err = i915_request_await_object(rq, batch->obj, false);
+	if (!err)
+		err = i915_vma_move_to_active(batch, rq, 0);
+	if (!err)
+		err = rq->engine->emit_bb_start(rq,
+						batch->node.start,
+						PAGE_SIZE, 0);
+	i915_vma_unlock(batch);
+	i915_vma_unpin(batch);
+
+	if (!err)
+		i915_request_get(rq);
+	i915_request_add(rq);
+
+out_batch:
+	i915_vma_put(batch);
+out_vma:
+	i915_vma_unpin(vma);
+out_ce:
+	intel_context_put(ce);
+	return err ? ERR_PTR(err) : rq;
+}
+
+static int preempt_user(struct intel_engine_cs *engine,
+			struct i915_vma *global,
+			int id)
+{
+	struct i915_sched_attr attr = {
+		.priority = I915_PRIORITY_MAX
+	};
+	struct i915_request *rq;
+	int err = 0;
+	u32 *cs;
+
+	rq = intel_engine_create_kernel_request(engine);
+	if (IS_ERR(rq))
+		return PTR_ERR(rq);
+
+	cs = intel_ring_begin(rq, 4);
+	if (IS_ERR(cs)) {
+		i915_request_add(rq);
+		return PTR_ERR(cs);
+	}
+
+	*cs++ = MI_STORE_DWORD_IMM_GEN4 | MI_USE_GGTT;
+	*cs++ = i915_ggtt_offset(global);
+	*cs++ = 0;
+	*cs++ = id;
+
+	intel_ring_advance(rq, cs);
+
+	i915_request_get(rq);
+	i915_request_add(rq);
+
+	engine->schedule(rq, &attr);
+
+	if (i915_request_wait(rq, 0, HZ / 2) < 0)
+		err = -ETIME;
+	i915_request_put(rq);
+
+	return err;
+}
+
+static int live_preempt_user(void *arg)
+{
+	struct intel_gt *gt = arg;
+	struct intel_engine_cs *engine;
+	struct i915_vma *global;
+	enum intel_engine_id id;
+	u32 *result;
+	int err = 0;
+
+	if (!HAS_LOGICAL_RING_PREEMPTION(gt->i915))
+		return 0;
+
+	/*
+	 * In our other tests, we look at preemption in carefully
+	 * controlled conditions in the ringbuffer. Since most of the
+	 * time is spent in user batches, most of our preemptions naturally
+	 * occur there. We want to verify that when we preempt inside a batch
+	 * we continue on from the current instruction and do not roll back
+	 * to the start, or another earlier arbitration point.
+	 *
+	 * To verify this, we create a batch which is a mixture of
+	 * MI_MATH (gpr++) MI_SRM (gpr) and preemption points. Then with
+	 * a few preempting contexts thrown into the mix, we look for any
+	 * repeated instructions (which show up as incorrect values).
+	 */
+
+	global = create_global(gt, 4096);
+	if (IS_ERR(global))
+		return PTR_ERR(global);
+
+	result = i915_gem_object_pin_map(global->obj, I915_MAP_WC);
+	if (IS_ERR(result)) {
+		i915_vma_unpin_and_release(&global, 0);
+		return PTR_ERR(result);
+	}
+
+	for_each_engine(engine, gt, id) {
+		struct i915_request *client[3] = {};
+		struct igt_live_test t;
+		int i;
+
+		if (!intel_engine_has_preemption(engine))
+			continue;
+
+		if (IS_GEN(gt->i915, 8) && engine->class != RENDER_CLASS)
+			continue; /* we need per-context GPR */
+
+		if (igt_live_test_begin(&t, gt->i915, __func__, engine->name)) {
+			err = -EIO;
+			break;
+		}
+
+		memset(result, 0, 4096);
+
+		for (i = 0; i < ARRAY_SIZE(client); i++) {
+			struct i915_request *rq;
+
+			rq = create_gpr_client(engine, global,
+					       NUM_GPR * i * sizeof(u32));
+			if (IS_ERR(rq))
+				goto end_test;
+
+			client[i] = rq;
+		}
+
+		/* Continuously preempt the set of 3 running contexts */
+		for (i = 1; i <= NUM_GPR; i++) {
+			err = preempt_user(engine, global, i);
+			if (err)
+				goto end_test;
+		}
+
+		if (READ_ONCE(result[0]) != NUM_GPR) {
+			pr_err("%s: Failed to release semaphore\n",
+			       engine->name);
+			err = -EIO;
+			goto end_test;
+		}
+
+		for (i = 0; i < ARRAY_SIZE(client); i++) {
+			int gpr;
+
+			if (i915_request_wait(client[i], 0, HZ / 2) < 0) {
+				err = -ETIME;
+				goto end_test;
+			}
+
+			for (gpr = 1; gpr < NUM_GPR; gpr++) {
+				if (result[NUM_GPR * i + gpr] != 1) {
+					pr_err("%s: Invalid result, client %d, gpr %d, result: %d\n",
+					       engine->name,
+					       i, gpr, result[NUM_GPR * i + gpr]);
+					err = -EINVAL;
+					goto end_test;
+				}
+			}
+		}
+
+end_test:
+		for (i = 0; i < ARRAY_SIZE(client); i++) {
+			if (!client[i])
+				break;
+
+			i915_request_put(client[i]);
+		}
+
+		/* Flush the semaphores on error */
+		smp_store_mb(result[0], -1);
+		if (igt_live_test_end(&t))
+			err = -EIO;
+		if (err)
+			break;
+	}
+
+	i915_vma_unpin_and_release(&global, I915_VMA_RELEASE_MAP);
+	return err;
+}
+
 static int live_preempt_timeout(void *arg)
 {
 	struct intel_gt *gt = arg;
@@ -3970,6 +4324,7 @@ int intel_execlists_live_selftests(struct drm_i915_private *i915)
 		SUBTEST(live_chain_preempt),
 		SUBTEST(live_preempt_gang),
 		SUBTEST(live_preempt_timeout),
+		SUBTEST(live_preempt_user),
 		SUBTEST(live_preempt_smoke),
 		SUBTEST(live_virtual_engine),
 		SUBTEST(live_virtual_mask),
@@ -4097,13 +4452,12 @@ static int live_lrc_layout(void *arg)
 		if (!engine->default_state)
 			continue;
 
-		hw = i915_gem_object_pin_map(engine->default_state,
-					     I915_MAP_WB);
+		hw = shmem_pin_map(engine->default_state);
 		if (IS_ERR(hw)) {
 			err = PTR_ERR(hw);
 			break;
 		}
-		hw += LRC_STATE_PN * PAGE_SIZE / sizeof(*hw);
+		hw += LRC_STATE_OFFSET / sizeof(*hw);
 
 		execlists_init_reg_state(memset(lrc, POISON_INUSE, PAGE_SIZE),
 					 engine->kernel_context,
@@ -4170,7 +4524,7 @@ static int live_lrc_layout(void *arg)
 			hexdump(lrc, PAGE_SIZE);
 		}
 
-		i915_gem_object_unpin_map(engine->default_state);
+		shmem_unpin_map(engine->default_state, hw);
 		if (err)
 			break;
 	}
@@ -4238,11 +4592,36 @@ static int live_lrc_fixed(void *arg)
 				CTX_BB_STATE - 1,
 				"BB_STATE"
 			},
+			{
+				i915_mmio_reg_offset(RING_BB_PER_CTX_PTR(engine->mmio_base)),
+				lrc_ring_wa_bb_per_ctx(engine),
+				"RING_BB_PER_CTX_PTR"
+			},
+			{
+				i915_mmio_reg_offset(RING_INDIRECT_CTX(engine->mmio_base)),
+				lrc_ring_indirect_ptr(engine),
+				"RING_INDIRECT_CTX_PTR"
+			},
+			{
+				i915_mmio_reg_offset(RING_INDIRECT_CTX_OFFSET(engine->mmio_base)),
+				lrc_ring_indirect_offset(engine),
+				"RING_INDIRECT_CTX_OFFSET"
+			},
 			{
 				i915_mmio_reg_offset(RING_CTX_TIMESTAMP(engine->mmio_base)),
 				CTX_TIMESTAMP - 1,
 				"RING_CTX_TIMESTAMP"
 			},
+			{
+				i915_mmio_reg_offset(GEN8_RING_CS_GPR(engine->mmio_base, 0)),
+				lrc_ring_gpr0(engine),
+				"RING_CS_GPR0"
+			},
+			{
+				i915_mmio_reg_offset(RING_CMD_BUF_CCTL(engine->mmio_base)),
+				lrc_ring_cmd_buf_cctl(engine),
+				"RING_CMD_BUF_CCTL"
+			},
 			{ },
 		}, *t;
 		u32 *hw;
@@ -4250,13 +4629,12 @@ static int live_lrc_fixed(void *arg)
 		if (!engine->default_state)
 			continue;
 
-		hw = i915_gem_object_pin_map(engine->default_state,
-					     I915_MAP_WB);
+		hw = shmem_pin_map(engine->default_state);
 		if (IS_ERR(hw)) {
 			err = PTR_ERR(hw);
 			break;
 		}
-		hw += LRC_STATE_PN * PAGE_SIZE / sizeof(*hw);
+		hw += LRC_STATE_OFFSET / sizeof(*hw);
 
 		for (t = tbl; t->name; t++) {
 			int dw = find_offset(hw, t->reg);
@@ -4272,7 +4650,7 @@ static int live_lrc_fixed(void *arg)
 			}
 		}
 
-		i915_gem_object_unpin_map(engine->default_state);
+		shmem_unpin_map(engine->default_state, hw);
 	}
 
 	return err;
@@ -4842,7 +5220,7 @@ store_context(struct intel_context *ce, struct i915_vma *scratch)
 	x = 0;
 	dw = 0;
 	hw = ce->engine->pinned_default_state;
-	hw += LRC_STATE_PN * PAGE_SIZE / sizeof(*hw);
+	hw += LRC_STATE_OFFSET / sizeof(*hw);
 	do {
 		u32 len = hw[dw] & 0x7f;
 
@@ -4995,7 +5373,7 @@ static struct i915_vma *load_context(struct intel_context *ce, u32 poison)
 
 	dw = 0;
 	hw = ce->engine->pinned_default_state;
-	hw += LRC_STATE_PN * PAGE_SIZE / sizeof(*hw);
+	hw += LRC_STATE_OFFSET / sizeof(*hw);
 	do {
 		u32 len = hw[dw] & 0x7f;
 
@@ -5119,12 +5497,12 @@ static int compare_isolation(struct intel_engine_cs *engine,
 		err = PTR_ERR(lrc);
 		goto err_B1;
 	}
-	lrc += LRC_STATE_PN * PAGE_SIZE / sizeof(*hw);
+	lrc += LRC_STATE_OFFSET / sizeof(*hw);
 
 	x = 0;
 	dw = 0;
 	hw = engine->pinned_default_state;
-	hw += LRC_STATE_PN * PAGE_SIZE / sizeof(*hw);
+	hw += LRC_STATE_OFFSET / sizeof(*hw);
 	do {
 		u32 len = hw[dw] & 0x7f;
 
@@ -5155,7 +5533,6 @@ static int compare_isolation(struct intel_engine_cs *engine,
 					       A[0][x], B[0][x], B[1][x],
 					       poison, lrc[dw + 1]);
 					err = -EINVAL;
-					break;
 				}
 			}
 			dw += 2;
@@ -5294,6 +5671,7 @@ static int live_lrc_isolation(void *arg)
 		0xffffffff,
 		0xffff0000,
 	};
+	int err = 0;
 
 	/*
 	 * Our goal is try and verify that per-context state cannot be
@@ -5304,7 +5682,6 @@ static int live_lrc_isolation(void *arg)
 	 */
 
 	for_each_engine(engine, gt, id) {
-		int err = 0;
 		int i;
 
 		/* Just don't even ask */
@@ -5315,23 +5692,180 @@ static int live_lrc_isolation(void *arg)
 		intel_engine_pm_get(engine);
 		if (engine->pinned_default_state) {
 			for (i = 0; i < ARRAY_SIZE(poison); i++) {
-				err = __lrc_isolation(engine, poison[i]);
-				if (err)
-					break;
+				int result;
 
-				err = __lrc_isolation(engine, ~poison[i]);
-				if (err)
-					break;
+				result = __lrc_isolation(engine, poison[i]);
+				if (result && !err)
+					err = result;
+
+				result = __lrc_isolation(engine, ~poison[i]);
+				if (result && !err)
+					err = result;
 			}
 		}
 		intel_engine_pm_put(engine);
+		if (igt_flush_test(gt->i915)) {
+			err = -EIO;
+			break;
+		}
+	}
+
+	return err;
+}
+
+static int indirect_ctx_submit_req(struct intel_context *ce)
+{
+	struct i915_request *rq;
+	int err = 0;
+
+	rq = intel_context_create_request(ce);
+	if (IS_ERR(rq))
+		return PTR_ERR(rq);
+
+	i915_request_get(rq);
+	i915_request_add(rq);
+
+	if (i915_request_wait(rq, 0, HZ / 5) < 0)
+		err = -ETIME;
+
+	i915_request_put(rq);
+
+	return err;
+}
+
+#define CTX_BB_CANARY_OFFSET (3 * 1024)
+#define CTX_BB_CANARY_INDEX  (CTX_BB_CANARY_OFFSET / sizeof(u32))
+
+static u32 *
+emit_indirect_ctx_bb_canary(const struct intel_context *ce, u32 *cs)
+{
+	*cs++ = MI_STORE_REGISTER_MEM_GEN8 |
+		MI_SRM_LRM_GLOBAL_GTT |
+		MI_LRI_LRM_CS_MMIO;
+	*cs++ = i915_mmio_reg_offset(RING_START(0));
+	*cs++ = i915_ggtt_offset(ce->state) +
+		context_wa_bb_offset(ce) +
+		CTX_BB_CANARY_OFFSET;
+	*cs++ = 0;
+
+	return cs;
+}
+
+static void
+indirect_ctx_bb_setup(struct intel_context *ce)
+{
+	u32 *cs = context_indirect_bb(ce);
+
+	cs[CTX_BB_CANARY_INDEX] = 0xdeadf00d;
+
+	setup_indirect_ctx_bb(ce, ce->engine, emit_indirect_ctx_bb_canary);
+}
+
+static bool check_ring_start(struct intel_context *ce)
+{
+	const u32 * const ctx_bb = (void *)(ce->lrc_reg_state) -
+		LRC_STATE_OFFSET + context_wa_bb_offset(ce);
+
+	if (ctx_bb[CTX_BB_CANARY_INDEX] == ce->lrc_reg_state[CTX_RING_START])
+		return true;
+
+	pr_err("ring start mismatch: canary 0x%08x vs state 0x%08x\n",
+	       ctx_bb[CTX_BB_CANARY_INDEX],
+	       ce->lrc_reg_state[CTX_RING_START]);
+
+	return false;
+}
+
+static int indirect_ctx_bb_check(struct intel_context *ce)
+{
+	int err;
+
+	err = indirect_ctx_submit_req(ce);
+	if (err)
+		return err;
+
+	if (!check_ring_start(ce))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int __live_lrc_indirect_ctx_bb(struct intel_engine_cs *engine)
+{
+	struct intel_context *a, *b;
+	int err;
+
+	a = intel_context_create(engine);
+	if (IS_ERR(a))
+		return PTR_ERR(a);
+	err = intel_context_pin(a);
+	if (err)
+		goto put_a;
+
+	b = intel_context_create(engine);
+	if (IS_ERR(b)) {
+		err = PTR_ERR(b);
+		goto unpin_a;
+	}
+	err = intel_context_pin(b);
+	if (err)
+		goto put_b;
+
+	/* We use the already reserved extra page in context state */
+	if (!a->wa_bb_page) {
+		GEM_BUG_ON(b->wa_bb_page);
+		GEM_BUG_ON(INTEL_GEN(engine->i915) == 12);
+		goto unpin_b;
+	}
+
+	/*
+	 * In order to test that our per context bb is truly per context,
+	 * and executes at the intended spot on context restoring process,
+	 * make the batch store the ring start value to memory.
+	 * As ring start is restored apriori of starting the indirect ctx bb and
+	 * as it will be different for each context, it fits to this purpose.
+	 */
+	indirect_ctx_bb_setup(a);
+	indirect_ctx_bb_setup(b);
+
+	err = indirect_ctx_bb_check(a);
+	if (err)
+		goto unpin_b;
+
+	err = indirect_ctx_bb_check(b);
+
+unpin_b:
+	intel_context_unpin(b);
+put_b:
+	intel_context_put(b);
+unpin_a:
+	intel_context_unpin(a);
+put_a:
+	intel_context_put(a);
+
+	return err;
+}
+
+static int live_lrc_indirect_ctx_bb(void *arg)
+{
+	struct intel_gt *gt = arg;
+	struct intel_engine_cs *engine;
+	enum intel_engine_id id;
+	int err = 0;
+
+	for_each_engine(engine, gt, id) {
+		intel_engine_pm_get(engine);
+		err = __live_lrc_indirect_ctx_bb(engine);
+		intel_engine_pm_put(engine);
+
 		if (igt_flush_test(gt->i915))
 			err = -EIO;
+
 		if (err)
-			return err;
+			break;
 	}
 
-	return 0;
+	return err;
 }
 
 static void garbage_reset(struct intel_engine_cs *engine,
@@ -5365,7 +5899,7 @@ static struct i915_request *garbage(struct intel_context *ce,
 	prandom_bytes_state(prng,
 			    ce->lrc_reg_state,
 			    ce->engine->context_size -
-			    LRC_STATE_PN * PAGE_SIZE);
+			    LRC_STATE_OFFSET);
 
 	rq = intel_context_create_request(ce);
 	if (IS_ERR(rq)) {
@@ -5569,6 +6103,7 @@ int intel_lrc_live_selftests(struct drm_i915_private *i915)
 		SUBTEST(live_lrc_timestamp),
 		SUBTEST(live_lrc_garbage),
 		SUBTEST(live_pphwsp_runtime),
+		SUBTEST(live_lrc_indirect_ctx_bb),
 	};
 
 	if (!HAS_LOGICAL_RING_CONTEXTS(i915))
diff --git a/drivers/gpu/drm/i915/gt/selftest_rc6.c b/drivers/gpu/drm/i915/gt/selftest_rc6.c
index 95b165faeba7..2dc460624bbc 100644
--- a/drivers/gpu/drm/i915/gt/selftest_rc6.c
+++ b/drivers/gpu/drm/i915/gt/selftest_rc6.c
@@ -11,6 +11,7 @@
 #include "selftest_rc6.h"
 
 #include "selftests/i915_random.h"
+#include "selftests/librapl.h"
 
 static u64 rc6_residency(struct intel_rc6 *rc6)
 {
@@ -31,7 +32,9 @@ int live_rc6_manual(void *arg)
 {
 	struct intel_gt *gt = arg;
 	struct intel_rc6 *rc6 = &gt->rc6;
+	u64 rc0_power, rc6_power;
 	intel_wakeref_t wakeref;
+	ktime_t dt;
 	u64 res[2];
 	int err = 0;
 
@@ -54,7 +57,12 @@ int live_rc6_manual(void *arg)
 	msleep(1); /* wakeup is not immediate, takes about 100us on icl */
 
 	res[0] = rc6_residency(rc6);
+
+	dt = ktime_get();
+	rc0_power = librapl_energy_uJ();
 	msleep(250);
+	rc0_power = librapl_energy_uJ() - rc0_power;
+	dt = ktime_sub(ktime_get(), dt);
 	res[1] = rc6_residency(rc6);
 	if ((res[1] - res[0]) >> 10) {
 		pr_err("RC6 residency increased by %lldus while disabled for 250ms!\n",
@@ -63,13 +71,24 @@ int live_rc6_manual(void *arg)
 		goto out_unlock;
 	}
 
+	rc0_power = div64_u64(NSEC_PER_SEC * rc0_power, ktime_to_ns(dt));
+	if (!rc0_power) {
+		pr_err("No power measured while in RC0\n");
+		err = -EINVAL;
+		goto out_unlock;
+	}
+
 	/* Manually enter RC6 */
 	intel_rc6_park(rc6);
 
 	res[0] = rc6_residency(rc6);
+	intel_uncore_forcewake_flush(rc6_to_uncore(rc6), FORCEWAKE_ALL);
+	dt = ktime_get();
+	rc6_power = librapl_energy_uJ();
 	msleep(100);
+	rc6_power = librapl_energy_uJ() - rc6_power;
+	dt = ktime_sub(ktime_get(), dt);
 	res[1] = rc6_residency(rc6);
-
 	if (res[1] == res[0]) {
 		pr_err("Did not enter RC6! RC6_STATE=%08x, RC6_CONTROL=%08x, residency=%lld\n",
 		       intel_uncore_read_fw(gt->uncore, GEN6_RC_STATE),
@@ -78,6 +97,15 @@ int live_rc6_manual(void *arg)
 		err = -EINVAL;
 	}
 
+	rc6_power = div64_u64(NSEC_PER_SEC * rc6_power, ktime_to_ns(dt));
+	pr_info("GPU consumed %llduW in RC0 and %llduW in RC6\n",
+		rc0_power, rc6_power);
+	if (2 * rc6_power > rc0_power) {
+		pr_err("GPU leaked energy while in RC6!\n");
+		err = -EINVAL;
+		goto out_unlock;
+	}
+
 	/* Restore what should have been the original state! */
 	intel_rc6_unpark(rc6);
 
diff --git a/drivers/gpu/drm/i915/gt/selftest_rps.c b/drivers/gpu/drm/i915/gt/selftest_rps.c
new file mode 100644
index 000000000000..b89a7d7611f6
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/selftest_rps.c
@@ -0,0 +1,1303 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#include <linux/pm_qos.h>
+#include <linux/sort.h>
+
+#include "intel_engine_heartbeat.h"
+#include "intel_engine_pm.h"
+#include "intel_gpu_commands.h"
+#include "intel_gt_clock_utils.h"
+#include "intel_gt_pm.h"
+#include "intel_rc6.h"
+#include "selftest_rps.h"
+#include "selftests/igt_flush_test.h"
+#include "selftests/igt_spinner.h"
+#include "selftests/librapl.h"
+
+/* Try to isolate the impact of cstates from determing frequency response */
+#define CPU_LATENCY 0 /* -1 to disable pm_qos, 0 to disable cstates */
+
+static unsigned long engine_heartbeat_disable(struct intel_engine_cs *engine)
+{
+	unsigned long old;
+
+	old = fetch_and_zero(&engine->props.heartbeat_interval_ms);
+
+	intel_engine_pm_get(engine);
+	intel_engine_park_heartbeat(engine);
+
+	return old;
+}
+
+static void engine_heartbeat_enable(struct intel_engine_cs *engine,
+				    unsigned long saved)
+{
+	intel_engine_pm_put(engine);
+
+	engine->props.heartbeat_interval_ms = saved;
+}
+
+static void dummy_rps_work(struct work_struct *wrk)
+{
+}
+
+static int cmp_u64(const void *A, const void *B)
+{
+	const u64 *a = A, *b = B;
+
+	if (a < b)
+		return -1;
+	else if (a > b)
+		return 1;
+	else
+		return 0;
+}
+
+static struct i915_vma *
+create_spin_counter(struct intel_engine_cs *engine,
+		    struct i915_address_space *vm,
+		    bool srm,
+		    u32 **cancel,
+		    u32 **counter)
+{
+	enum {
+		COUNT,
+		INC,
+		__NGPR__,
+	};
+#define CS_GPR(x) GEN8_RING_CS_GPR(engine->mmio_base, x)
+	struct drm_i915_gem_object *obj;
+	struct i915_vma *vma;
+	unsigned long end;
+	u32 *base, *cs;
+	int loop, i;
+	int err;
+
+	obj = i915_gem_object_create_internal(vm->i915, 64 << 10);
+	if (IS_ERR(obj))
+		return ERR_CAST(obj);
+
+	end = obj->base.size / sizeof(u32) - 1;
+
+	vma = i915_vma_instance(obj, vm, NULL);
+	if (IS_ERR(vma)) {
+		i915_gem_object_put(obj);
+		return vma;
+	}
+
+	err = i915_vma_pin(vma, 0, 0, PIN_USER);
+	if (err) {
+		i915_vma_put(vma);
+		return ERR_PTR(err);
+	}
+
+	base = i915_gem_object_pin_map(obj, I915_MAP_WC);
+	if (IS_ERR(base)) {
+		i915_gem_object_put(obj);
+		return ERR_CAST(base);
+	}
+	cs = base;
+
+	*cs++ = MI_LOAD_REGISTER_IMM(__NGPR__ * 2);
+	for (i = 0; i < __NGPR__; i++) {
+		*cs++ = i915_mmio_reg_offset(CS_GPR(i));
+		*cs++ = 0;
+		*cs++ = i915_mmio_reg_offset(CS_GPR(i)) + 4;
+		*cs++ = 0;
+	}
+
+	*cs++ = MI_LOAD_REGISTER_IMM(1);
+	*cs++ = i915_mmio_reg_offset(CS_GPR(INC));
+	*cs++ = 1;
+
+	loop = cs - base;
+
+	/* Unroll the loop to avoid MI_BB_START stalls impacting measurements */
+	for (i = 0; i < 1024; i++) {
+		*cs++ = MI_MATH(4);
+		*cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCA, MI_MATH_REG(COUNT));
+		*cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCB, MI_MATH_REG(INC));
+		*cs++ = MI_MATH_ADD;
+		*cs++ = MI_MATH_STORE(MI_MATH_REG(COUNT), MI_MATH_REG_ACCU);
+
+		if (srm) {
+			*cs++ = MI_STORE_REGISTER_MEM_GEN8;
+			*cs++ = i915_mmio_reg_offset(CS_GPR(COUNT));
+			*cs++ = lower_32_bits(vma->node.start + end * sizeof(*cs));
+			*cs++ = upper_32_bits(vma->node.start + end * sizeof(*cs));
+		}
+	}
+
+	*cs++ = MI_BATCH_BUFFER_START_GEN8;
+	*cs++ = lower_32_bits(vma->node.start + loop * sizeof(*cs));
+	*cs++ = upper_32_bits(vma->node.start + loop * sizeof(*cs));
+	GEM_BUG_ON(cs - base > end);
+
+	i915_gem_object_flush_map(obj);
+
+	*cancel = base + loop;
+	*counter = srm ? memset32(base + end, 0, 1) : NULL;
+	return vma;
+}
+
+static u8 wait_for_freq(struct intel_rps *rps, u8 freq, int timeout_ms)
+{
+	u8 history[64], i;
+	unsigned long end;
+	int sleep;
+
+	i = 0;
+	memset(history, freq, sizeof(history));
+	sleep = 20;
+
+	/* The PCU does not change instantly, but drifts towards the goal? */
+	end = jiffies + msecs_to_jiffies(timeout_ms);
+	do {
+		u8 act;
+
+		act = read_cagf(rps);
+		if (time_after(jiffies, end))
+			return act;
+
+		/* Target acquired */
+		if (act == freq)
+			return act;
+
+		/* Any change within the last N samples? */
+		if (!memchr_inv(history, act, sizeof(history)))
+			return act;
+
+		history[i] = act;
+		i = (i + 1) % ARRAY_SIZE(history);
+
+		usleep_range(sleep, 2 * sleep);
+		sleep *= 2;
+		if (sleep > timeout_ms * 20)
+			sleep = timeout_ms * 20;
+	} while (1);
+}
+
+static u8 rps_set_check(struct intel_rps *rps, u8 freq)
+{
+	mutex_lock(&rps->lock);
+	GEM_BUG_ON(!intel_rps_is_active(rps));
+	intel_rps_set(rps, freq);
+	GEM_BUG_ON(rps->last_freq != freq);
+	mutex_unlock(&rps->lock);
+
+	return wait_for_freq(rps, freq, 50);
+}
+
+static void show_pstate_limits(struct intel_rps *rps)
+{
+	struct drm_i915_private *i915 = rps_to_i915(rps);
+
+	if (IS_BROXTON(i915)) {
+		pr_info("P_STATE_CAP[%x]: 0x%08x\n",
+			i915_mmio_reg_offset(BXT_RP_STATE_CAP),
+			intel_uncore_read(rps_to_uncore(rps),
+					  BXT_RP_STATE_CAP));
+	} else if (IS_GEN(i915, 9)) {
+		pr_info("P_STATE_LIMITS[%x]: 0x%08x\n",
+			i915_mmio_reg_offset(GEN9_RP_STATE_LIMITS),
+			intel_uncore_read(rps_to_uncore(rps),
+					  GEN9_RP_STATE_LIMITS));
+	}
+}
+
+int live_rps_clock_interval(void *arg)
+{
+	struct intel_gt *gt = arg;
+	struct intel_rps *rps = &gt->rps;
+	void (*saved_work)(struct work_struct *wrk);
+	struct intel_engine_cs *engine;
+	enum intel_engine_id id;
+	struct igt_spinner spin;
+	int err = 0;
+
+	if (!intel_rps_is_enabled(rps))
+		return 0;
+
+	if (igt_spinner_init(&spin, gt))
+		return -ENOMEM;
+
+	intel_gt_pm_wait_for_idle(gt);
+	saved_work = rps->work.func;
+	rps->work.func = dummy_rps_work;
+
+	intel_gt_pm_get(gt);
+	intel_rps_disable(&gt->rps);
+
+	intel_gt_check_clock_frequency(gt);
+
+	for_each_engine(engine, gt, id) {
+		unsigned long saved_heartbeat;
+		struct i915_request *rq;
+		ktime_t dt;
+		u32 cycles;
+
+		if (!intel_engine_can_store_dword(engine))
+			continue;
+
+		saved_heartbeat = engine_heartbeat_disable(engine);
+
+		rq = igt_spinner_create_request(&spin,
+						engine->kernel_context,
+						MI_NOOP);
+		if (IS_ERR(rq)) {
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			err = PTR_ERR(rq);
+			break;
+		}
+
+		i915_request_add(rq);
+
+		if (!igt_wait_for_spinner(&spin, rq)) {
+			pr_err("%s: RPS spinner did not start\n",
+			       engine->name);
+			igt_spinner_end(&spin);
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			intel_gt_set_wedged(engine->gt);
+			err = -EIO;
+			break;
+		}
+
+		intel_uncore_forcewake_get(gt->uncore, FORCEWAKE_ALL);
+
+		intel_uncore_write_fw(gt->uncore, GEN6_RP_CUR_UP_EI, 0);
+
+		/* Set the evaluation interval to infinity! */
+		intel_uncore_write_fw(gt->uncore,
+				      GEN6_RP_UP_EI, 0xffffffff);
+		intel_uncore_write_fw(gt->uncore,
+				      GEN6_RP_UP_THRESHOLD, 0xffffffff);
+
+		intel_uncore_write_fw(gt->uncore, GEN6_RP_CONTROL,
+				      GEN6_RP_ENABLE | GEN6_RP_UP_BUSY_AVG);
+
+		if (wait_for(intel_uncore_read_fw(gt->uncore,
+						  GEN6_RP_CUR_UP_EI),
+			     10)) {
+			/* Just skip the test; assume lack of HW support */
+			pr_notice("%s: rps evaluation interval not ticking\n",
+				  engine->name);
+			err = -ENODEV;
+		} else {
+			preempt_disable();
+			dt = ktime_get();
+			cycles = -intel_uncore_read_fw(gt->uncore,
+						       GEN6_RP_CUR_UP_EI);
+			udelay(1000);
+			dt = ktime_sub(ktime_get(), dt);
+			cycles += intel_uncore_read_fw(gt->uncore,
+						       GEN6_RP_CUR_UP_EI);
+			preempt_enable();
+		}
+
+		intel_uncore_write_fw(gt->uncore, GEN6_RP_CONTROL, 0);
+		intel_uncore_forcewake_put(gt->uncore, FORCEWAKE_ALL);
+
+		igt_spinner_end(&spin);
+		engine_heartbeat_enable(engine, saved_heartbeat);
+
+		if (err == 0) {
+			u64 time = intel_gt_pm_interval_to_ns(gt, cycles);
+			u32 expected =
+				intel_gt_ns_to_pm_interval(gt, ktime_to_ns(dt));
+
+			pr_info("%s: rps counted %d C0 cycles [%lldns] in %lldns [%d cycles], using GT clock frequency of %uKHz\n",
+				engine->name, cycles, time, ktime_to_ns(dt), expected,
+				gt->clock_frequency / 1000);
+
+			if (10 * time < 8 * ktime_to_ns(dt) ||
+			    8 * time > 10 * ktime_to_ns(dt)) {
+				pr_err("%s: rps clock time does not match walltime!\n",
+				       engine->name);
+				err = -EINVAL;
+			}
+
+			if (10 * expected < 8 * cycles ||
+			    8 * expected > 10 * cycles) {
+				pr_err("%s: walltime does not match rps clock ticks!\n",
+				       engine->name);
+				err = -EINVAL;
+			}
+		}
+
+		if (igt_flush_test(gt->i915))
+			err = -EIO;
+
+		break; /* once is enough */
+	}
+
+	intel_rps_enable(&gt->rps);
+	intel_gt_pm_put(gt);
+
+	igt_spinner_fini(&spin);
+
+	intel_gt_pm_wait_for_idle(gt);
+	rps->work.func = saved_work;
+
+	if (err == -ENODEV) /* skipped, don't report a fail */
+		err = 0;
+
+	return err;
+}
+
+int live_rps_control(void *arg)
+{
+	struct intel_gt *gt = arg;
+	struct intel_rps *rps = &gt->rps;
+	void (*saved_work)(struct work_struct *wrk);
+	struct intel_engine_cs *engine;
+	enum intel_engine_id id;
+	struct igt_spinner spin;
+	int err = 0;
+
+	/*
+	 * Check that the actual frequency matches our requested frequency,
+	 * to verify our control mechanism. We have to be careful that the
+	 * PCU may throttle the GPU in which case the actual frequency used
+	 * will be lowered than requested.
+	 */
+
+	if (!intel_rps_is_enabled(rps))
+		return 0;
+
+	if (IS_CHERRYVIEW(gt->i915)) /* XXX fragile PCU */
+		return 0;
+
+	if (igt_spinner_init(&spin, gt))
+		return -ENOMEM;
+
+	intel_gt_pm_wait_for_idle(gt);
+	saved_work = rps->work.func;
+	rps->work.func = dummy_rps_work;
+
+	intel_gt_pm_get(gt);
+	for_each_engine(engine, gt, id) {
+		unsigned long saved_heartbeat;
+		struct i915_request *rq;
+		ktime_t min_dt, max_dt;
+		int f, limit;
+		int min, max;
+
+		if (!intel_engine_can_store_dword(engine))
+			continue;
+
+		saved_heartbeat = engine_heartbeat_disable(engine);
+
+		rq = igt_spinner_create_request(&spin,
+						engine->kernel_context,
+						MI_NOOP);
+		if (IS_ERR(rq)) {
+			err = PTR_ERR(rq);
+			break;
+		}
+
+		i915_request_add(rq);
+
+		if (!igt_wait_for_spinner(&spin, rq)) {
+			pr_err("%s: RPS spinner did not start\n",
+			       engine->name);
+			igt_spinner_end(&spin);
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			intel_gt_set_wedged(engine->gt);
+			err = -EIO;
+			break;
+		}
+
+		if (rps_set_check(rps, rps->min_freq) != rps->min_freq) {
+			pr_err("%s: could not set minimum frequency [%x], only %x!\n",
+			       engine->name, rps->min_freq, read_cagf(rps));
+			igt_spinner_end(&spin);
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			show_pstate_limits(rps);
+			err = -EINVAL;
+			break;
+		}
+
+		for (f = rps->min_freq + 1; f < rps->max_freq; f++) {
+			if (rps_set_check(rps, f) < f)
+				break;
+		}
+
+		limit = rps_set_check(rps, f);
+
+		if (rps_set_check(rps, rps->min_freq) != rps->min_freq) {
+			pr_err("%s: could not restore minimum frequency [%x], only %x!\n",
+			       engine->name, rps->min_freq, read_cagf(rps));
+			igt_spinner_end(&spin);
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			show_pstate_limits(rps);
+			err = -EINVAL;
+			break;
+		}
+
+		max_dt = ktime_get();
+		max = rps_set_check(rps, limit);
+		max_dt = ktime_sub(ktime_get(), max_dt);
+
+		min_dt = ktime_get();
+		min = rps_set_check(rps, rps->min_freq);
+		min_dt = ktime_sub(ktime_get(), min_dt);
+
+		igt_spinner_end(&spin);
+		engine_heartbeat_enable(engine, saved_heartbeat);
+
+		pr_info("%s: range:[%x:%uMHz, %x:%uMHz] limit:[%x:%uMHz], %x:%x response %lluns:%lluns\n",
+			engine->name,
+			rps->min_freq, intel_gpu_freq(rps, rps->min_freq),
+			rps->max_freq, intel_gpu_freq(rps, rps->max_freq),
+			limit, intel_gpu_freq(rps, limit),
+			min, max, ktime_to_ns(min_dt), ktime_to_ns(max_dt));
+
+		if (limit == rps->min_freq) {
+			pr_err("%s: GPU throttled to minimum!\n",
+			       engine->name);
+			show_pstate_limits(rps);
+			err = -ENODEV;
+			break;
+		}
+
+		if (igt_flush_test(gt->i915)) {
+			err = -EIO;
+			break;
+		}
+	}
+	intel_gt_pm_put(gt);
+
+	igt_spinner_fini(&spin);
+
+	intel_gt_pm_wait_for_idle(gt);
+	rps->work.func = saved_work;
+
+	return err;
+}
+
+static void show_pcu_config(struct intel_rps *rps)
+{
+	struct drm_i915_private *i915 = rps_to_i915(rps);
+	unsigned int max_gpu_freq, min_gpu_freq;
+	intel_wakeref_t wakeref;
+	int gpu_freq;
+
+	if (!HAS_LLC(i915))
+		return;
+
+	min_gpu_freq = rps->min_freq;
+	max_gpu_freq = rps->max_freq;
+	if (INTEL_GEN(i915) >= 9) {
+		/* Convert GT frequency to 50 HZ units */
+		min_gpu_freq /= GEN9_FREQ_SCALER;
+		max_gpu_freq /= GEN9_FREQ_SCALER;
+	}
+
+	wakeref = intel_runtime_pm_get(rps_to_uncore(rps)->rpm);
+
+	pr_info("%5s  %5s  %5s\n", "GPU", "eCPU", "eRing");
+	for (gpu_freq = min_gpu_freq; gpu_freq <= max_gpu_freq; gpu_freq++) {
+		int ia_freq = gpu_freq;
+
+		sandybridge_pcode_read(i915,
+				       GEN6_PCODE_READ_MIN_FREQ_TABLE,
+				       &ia_freq, NULL);
+
+		pr_info("%5d  %5d  %5d\n",
+			gpu_freq * 50,
+			((ia_freq >> 0) & 0xff) * 100,
+			((ia_freq >> 8) & 0xff) * 100);
+	}
+
+	intel_runtime_pm_put(rps_to_uncore(rps)->rpm, wakeref);
+}
+
+static u64 __measure_frequency(u32 *cntr, int duration_ms)
+{
+	u64 dc, dt;
+
+	dt = ktime_get();
+	dc = READ_ONCE(*cntr);
+	usleep_range(1000 * duration_ms, 2000 * duration_ms);
+	dc = READ_ONCE(*cntr) - dc;
+	dt = ktime_get() - dt;
+
+	return div64_u64(1000 * 1000 * dc, dt);
+}
+
+static u64 measure_frequency_at(struct intel_rps *rps, u32 *cntr, int *freq)
+{
+	u64 x[5];
+	int i;
+
+	*freq = rps_set_check(rps, *freq);
+	for (i = 0; i < 5; i++)
+		x[i] = __measure_frequency(cntr, 2);
+	*freq = (*freq + read_cagf(rps)) / 2;
+
+	/* A simple triangle filter for better result stability */
+	sort(x, 5, sizeof(*x), cmp_u64, NULL);
+	return div_u64(x[1] + 2 * x[2] + x[3], 4);
+}
+
+static u64 __measure_cs_frequency(struct intel_engine_cs *engine,
+				  int duration_ms)
+{
+	u64 dc, dt;
+
+	dt = ktime_get();
+	dc = intel_uncore_read_fw(engine->uncore, CS_GPR(0));
+	usleep_range(1000 * duration_ms, 2000 * duration_ms);
+	dc = intel_uncore_read_fw(engine->uncore, CS_GPR(0)) - dc;
+	dt = ktime_get() - dt;
+
+	return div64_u64(1000 * 1000 * dc, dt);
+}
+
+static u64 measure_cs_frequency_at(struct intel_rps *rps,
+				   struct intel_engine_cs *engine,
+				   int *freq)
+{
+	u64 x[5];
+	int i;
+
+	*freq = rps_set_check(rps, *freq);
+	for (i = 0; i < 5; i++)
+		x[i] = __measure_cs_frequency(engine, 2);
+	*freq = (*freq + read_cagf(rps)) / 2;
+
+	/* A simple triangle filter for better result stability */
+	sort(x, 5, sizeof(*x), cmp_u64, NULL);
+	return div_u64(x[1] + 2 * x[2] + x[3], 4);
+}
+
+static bool scaled_within(u64 x, u64 y, u32 f_n, u32 f_d)
+{
+	return f_d * x > f_n * y && f_n * x < f_d * y;
+}
+
+int live_rps_frequency_cs(void *arg)
+{
+	void (*saved_work)(struct work_struct *wrk);
+	struct intel_gt *gt = arg;
+	struct intel_rps *rps = &gt->rps;
+	struct intel_engine_cs *engine;
+	struct pm_qos_request qos;
+	enum intel_engine_id id;
+	int err = 0;
+
+	/*
+	 * The premise is that the GPU does change freqency at our behest.
+	 * Let's check there is a correspondence between the requested
+	 * frequency, the actual frequency, and the observed clock rate.
+	 */
+
+	if (!intel_rps_is_enabled(rps))
+		return 0;
+
+	if (INTEL_GEN(gt->i915) < 8) /* for CS simplicity */
+		return 0;
+
+	if (CPU_LATENCY >= 0)
+		cpu_latency_qos_add_request(&qos, CPU_LATENCY);
+
+	intel_gt_pm_wait_for_idle(gt);
+	saved_work = rps->work.func;
+	rps->work.func = dummy_rps_work;
+
+	for_each_engine(engine, gt, id) {
+		unsigned long saved_heartbeat;
+		struct i915_request *rq;
+		struct i915_vma *vma;
+		u32 *cancel, *cntr;
+		struct {
+			u64 count;
+			int freq;
+		} min, max;
+
+		saved_heartbeat = engine_heartbeat_disable(engine);
+
+		vma = create_spin_counter(engine,
+					  engine->kernel_context->vm, false,
+					  &cancel, &cntr);
+		if (IS_ERR(vma)) {
+			err = PTR_ERR(vma);
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			break;
+		}
+
+		rq = intel_engine_create_kernel_request(engine);
+		if (IS_ERR(rq)) {
+			err = PTR_ERR(rq);
+			goto err_vma;
+		}
+
+		i915_vma_lock(vma);
+		err = i915_request_await_object(rq, vma->obj, false);
+		if (!err)
+			err = i915_vma_move_to_active(vma, rq, 0);
+		if (!err)
+			err = rq->engine->emit_bb_start(rq,
+							vma->node.start,
+							PAGE_SIZE, 0);
+		i915_vma_unlock(vma);
+		i915_request_add(rq);
+		if (err)
+			goto err_vma;
+
+		if (wait_for(intel_uncore_read(engine->uncore, CS_GPR(0)),
+			     10)) {
+			pr_err("%s: timed loop did not start\n",
+			       engine->name);
+			goto err_vma;
+		}
+
+		min.freq = rps->min_freq;
+		min.count = measure_cs_frequency_at(rps, engine, &min.freq);
+
+		max.freq = rps->max_freq;
+		max.count = measure_cs_frequency_at(rps, engine, &max.freq);
+
+		pr_info("%s: min:%lluKHz @ %uMHz, max:%lluKHz @ %uMHz [%d%%]\n",
+			engine->name,
+			min.count, intel_gpu_freq(rps, min.freq),
+			max.count, intel_gpu_freq(rps, max.freq),
+			(int)DIV64_U64_ROUND_CLOSEST(100 * min.freq * max.count,
+						     max.freq * min.count));
+
+		if (!scaled_within(max.freq * min.count,
+				   min.freq * max.count,
+				   2, 3)) {
+			int f;
+
+			pr_err("%s: CS did not scale with frequency! scaled min:%llu, max:%llu\n",
+			       engine->name,
+			       max.freq * min.count,
+			       min.freq * max.count);
+			show_pcu_config(rps);
+
+			for (f = min.freq + 1; f <= rps->max_freq; f++) {
+				int act = f;
+				u64 count;
+
+				count = measure_cs_frequency_at(rps, engine, &act);
+				if (act < f)
+					break;
+
+				pr_info("%s: %x:%uMHz: %lluKHz [%d%%]\n",
+					engine->name,
+					act, intel_gpu_freq(rps, act), count,
+					(int)DIV64_U64_ROUND_CLOSEST(100 * min.freq * count,
+								     act * min.count));
+
+				f = act; /* may skip ahead [pcu granularity] */
+			}
+
+			err = -EINVAL;
+		}
+
+err_vma:
+		*cancel = MI_BATCH_BUFFER_END;
+		i915_gem_object_unpin_map(vma->obj);
+		i915_vma_unpin(vma);
+		i915_vma_put(vma);
+
+		engine_heartbeat_enable(engine, saved_heartbeat);
+		if (igt_flush_test(gt->i915))
+			err = -EIO;
+		if (err)
+			break;
+	}
+
+	intel_gt_pm_wait_for_idle(gt);
+	rps->work.func = saved_work;
+
+	if (CPU_LATENCY >= 0)
+		cpu_latency_qos_remove_request(&qos);
+
+	return err;
+}
+
+int live_rps_frequency_srm(void *arg)
+{
+	void (*saved_work)(struct work_struct *wrk);
+	struct intel_gt *gt = arg;
+	struct intel_rps *rps = &gt->rps;
+	struct intel_engine_cs *engine;
+	struct pm_qos_request qos;
+	enum intel_engine_id id;
+	int err = 0;
+
+	/*
+	 * The premise is that the GPU does change freqency at our behest.
+	 * Let's check there is a correspondence between the requested
+	 * frequency, the actual frequency, and the observed clock rate.
+	 */
+
+	if (!intel_rps_is_enabled(rps))
+		return 0;
+
+	if (INTEL_GEN(gt->i915) < 8) /* for CS simplicity */
+		return 0;
+
+	if (CPU_LATENCY >= 0)
+		cpu_latency_qos_add_request(&qos, CPU_LATENCY);
+
+	intel_gt_pm_wait_for_idle(gt);
+	saved_work = rps->work.func;
+	rps->work.func = dummy_rps_work;
+
+	for_each_engine(engine, gt, id) {
+		unsigned long saved_heartbeat;
+		struct i915_request *rq;
+		struct i915_vma *vma;
+		u32 *cancel, *cntr;
+		struct {
+			u64 count;
+			int freq;
+		} min, max;
+
+		saved_heartbeat = engine_heartbeat_disable(engine);
+
+		vma = create_spin_counter(engine,
+					  engine->kernel_context->vm, true,
+					  &cancel, &cntr);
+		if (IS_ERR(vma)) {
+			err = PTR_ERR(vma);
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			break;
+		}
+
+		rq = intel_engine_create_kernel_request(engine);
+		if (IS_ERR(rq)) {
+			err = PTR_ERR(rq);
+			goto err_vma;
+		}
+
+		i915_vma_lock(vma);
+		err = i915_request_await_object(rq, vma->obj, false);
+		if (!err)
+			err = i915_vma_move_to_active(vma, rq, 0);
+		if (!err)
+			err = rq->engine->emit_bb_start(rq,
+							vma->node.start,
+							PAGE_SIZE, 0);
+		i915_vma_unlock(vma);
+		i915_request_add(rq);
+		if (err)
+			goto err_vma;
+
+		if (wait_for(READ_ONCE(*cntr), 10)) {
+			pr_err("%s: timed loop did not start\n",
+			       engine->name);
+			goto err_vma;
+		}
+
+		min.freq = rps->min_freq;
+		min.count = measure_frequency_at(rps, cntr, &min.freq);
+
+		max.freq = rps->max_freq;
+		max.count = measure_frequency_at(rps, cntr, &max.freq);
+
+		pr_info("%s: min:%lluKHz @ %uMHz, max:%lluKHz @ %uMHz [%d%%]\n",
+			engine->name,
+			min.count, intel_gpu_freq(rps, min.freq),
+			max.count, intel_gpu_freq(rps, max.freq),
+			(int)DIV64_U64_ROUND_CLOSEST(100 * min.freq * max.count,
+						     max.freq * min.count));
+
+		if (!scaled_within(max.freq * min.count,
+				   min.freq * max.count,
+				   1, 2)) {
+			int f;
+
+			pr_err("%s: CS did not scale with frequency! scaled min:%llu, max:%llu\n",
+			       engine->name,
+			       max.freq * min.count,
+			       min.freq * max.count);
+			show_pcu_config(rps);
+
+			for (f = min.freq + 1; f <= rps->max_freq; f++) {
+				int act = f;
+				u64 count;
+
+				count = measure_frequency_at(rps, cntr, &act);
+				if (act < f)
+					break;
+
+				pr_info("%s: %x:%uMHz: %lluKHz [%d%%]\n",
+					engine->name,
+					act, intel_gpu_freq(rps, act), count,
+					(int)DIV64_U64_ROUND_CLOSEST(100 * min.freq * count,
+								     act * min.count));
+
+				f = act; /* may skip ahead [pcu granularity] */
+			}
+
+			err = -EINVAL;
+		}
+
+err_vma:
+		*cancel = MI_BATCH_BUFFER_END;
+		i915_gem_object_unpin_map(vma->obj);
+		i915_vma_unpin(vma);
+		i915_vma_put(vma);
+
+		engine_heartbeat_enable(engine, saved_heartbeat);
+		if (igt_flush_test(gt->i915))
+			err = -EIO;
+		if (err)
+			break;
+	}
+
+	intel_gt_pm_wait_for_idle(gt);
+	rps->work.func = saved_work;
+
+	if (CPU_LATENCY >= 0)
+		cpu_latency_qos_remove_request(&qos);
+
+	return err;
+}
+
+static void sleep_for_ei(struct intel_rps *rps, int timeout_us)
+{
+	/* Flush any previous EI */
+	usleep_range(timeout_us, 2 * timeout_us);
+
+	/* Reset the interrupt status */
+	rps_disable_interrupts(rps);
+	GEM_BUG_ON(rps->pm_iir);
+	rps_enable_interrupts(rps);
+
+	/* And then wait for the timeout, for real this time */
+	usleep_range(2 * timeout_us, 3 * timeout_us);
+}
+
+static int __rps_up_interrupt(struct intel_rps *rps,
+			      struct intel_engine_cs *engine,
+			      struct igt_spinner *spin)
+{
+	struct intel_uncore *uncore = engine->uncore;
+	struct i915_request *rq;
+	u32 timeout;
+
+	if (!intel_engine_can_store_dword(engine))
+		return 0;
+
+	rps_set_check(rps, rps->min_freq);
+
+	rq = igt_spinner_create_request(spin, engine->kernel_context, MI_NOOP);
+	if (IS_ERR(rq))
+		return PTR_ERR(rq);
+
+	i915_request_get(rq);
+	i915_request_add(rq);
+
+	if (!igt_wait_for_spinner(spin, rq)) {
+		pr_err("%s: RPS spinner did not start\n",
+		       engine->name);
+		i915_request_put(rq);
+		intel_gt_set_wedged(engine->gt);
+		return -EIO;
+	}
+
+	if (!intel_rps_is_active(rps)) {
+		pr_err("%s: RPS not enabled on starting spinner\n",
+		       engine->name);
+		igt_spinner_end(spin);
+		i915_request_put(rq);
+		return -EINVAL;
+	}
+
+	if (!(rps->pm_events & GEN6_PM_RP_UP_THRESHOLD)) {
+		pr_err("%s: RPS did not register UP interrupt\n",
+		       engine->name);
+		i915_request_put(rq);
+		return -EINVAL;
+	}
+
+	if (rps->last_freq != rps->min_freq) {
+		pr_err("%s: RPS did not program min frequency\n",
+		       engine->name);
+		i915_request_put(rq);
+		return -EINVAL;
+	}
+
+	timeout = intel_uncore_read(uncore, GEN6_RP_UP_EI);
+	timeout = intel_gt_pm_interval_to_ns(engine->gt, timeout);
+	timeout = DIV_ROUND_UP(timeout, 1000);
+
+	sleep_for_ei(rps, timeout);
+	GEM_BUG_ON(i915_request_completed(rq));
+
+	igt_spinner_end(spin);
+	i915_request_put(rq);
+
+	if (rps->cur_freq != rps->min_freq) {
+		pr_err("%s: Frequency unexpectedly changed [up], now %d!\n",
+		       engine->name, intel_rps_read_actual_frequency(rps));
+		return -EINVAL;
+	}
+
+	if (!(rps->pm_iir & GEN6_PM_RP_UP_THRESHOLD)) {
+		pr_err("%s: UP interrupt not recorded for spinner, pm_iir:%x, prev_up:%x, up_threshold:%x, up_ei:%x\n",
+		       engine->name, rps->pm_iir,
+		       intel_uncore_read(uncore, GEN6_RP_PREV_UP),
+		       intel_uncore_read(uncore, GEN6_RP_UP_THRESHOLD),
+		       intel_uncore_read(uncore, GEN6_RP_UP_EI));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int __rps_down_interrupt(struct intel_rps *rps,
+				struct intel_engine_cs *engine)
+{
+	struct intel_uncore *uncore = engine->uncore;
+	u32 timeout;
+
+	rps_set_check(rps, rps->max_freq);
+
+	if (!(rps->pm_events & GEN6_PM_RP_DOWN_THRESHOLD)) {
+		pr_err("%s: RPS did not register DOWN interrupt\n",
+		       engine->name);
+		return -EINVAL;
+	}
+
+	if (rps->last_freq != rps->max_freq) {
+		pr_err("%s: RPS did not program max frequency\n",
+		       engine->name);
+		return -EINVAL;
+	}
+
+	timeout = intel_uncore_read(uncore, GEN6_RP_DOWN_EI);
+	timeout = intel_gt_pm_interval_to_ns(engine->gt, timeout);
+	timeout = DIV_ROUND_UP(timeout, 1000);
+
+	sleep_for_ei(rps, timeout);
+
+	if (rps->cur_freq != rps->max_freq) {
+		pr_err("%s: Frequency unexpectedly changed [down], now %d!\n",
+		       engine->name,
+		       intel_rps_read_actual_frequency(rps));
+		return -EINVAL;
+	}
+
+	if (!(rps->pm_iir & (GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT))) {
+		pr_err("%s: DOWN interrupt not recorded for idle, pm_iir:%x, prev_down:%x, down_threshold:%x, down_ei:%x [prev_up:%x, up_threshold:%x, up_ei:%x]\n",
+		       engine->name, rps->pm_iir,
+		       intel_uncore_read(uncore, GEN6_RP_PREV_DOWN),
+		       intel_uncore_read(uncore, GEN6_RP_DOWN_THRESHOLD),
+		       intel_uncore_read(uncore, GEN6_RP_DOWN_EI),
+		       intel_uncore_read(uncore, GEN6_RP_PREV_UP),
+		       intel_uncore_read(uncore, GEN6_RP_UP_THRESHOLD),
+		       intel_uncore_read(uncore, GEN6_RP_UP_EI));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int live_rps_interrupt(void *arg)
+{
+	struct intel_gt *gt = arg;
+	struct intel_rps *rps = &gt->rps;
+	void (*saved_work)(struct work_struct *wrk);
+	struct intel_engine_cs *engine;
+	enum intel_engine_id id;
+	struct igt_spinner spin;
+	u32 pm_events;
+	int err = 0;
+
+	/*
+	 * First, let's check whether or not we are receiving interrupts.
+	 */
+
+	if (!intel_rps_has_interrupts(rps))
+		return 0;
+
+	intel_gt_pm_get(gt);
+	pm_events = rps->pm_events;
+	intel_gt_pm_put(gt);
+	if (!pm_events) {
+		pr_err("No RPS PM events registered, but RPS is enabled?\n");
+		return -ENODEV;
+	}
+
+	if (igt_spinner_init(&spin, gt))
+		return -ENOMEM;
+
+	intel_gt_pm_wait_for_idle(gt);
+	saved_work = rps->work.func;
+	rps->work.func = dummy_rps_work;
+
+	for_each_engine(engine, gt, id) {
+		/* Keep the engine busy with a spinner; expect an UP! */
+		if (pm_events & GEN6_PM_RP_UP_THRESHOLD) {
+			unsigned long saved_heartbeat;
+
+			intel_gt_pm_wait_for_idle(engine->gt);
+			GEM_BUG_ON(intel_rps_is_active(rps));
+
+			saved_heartbeat = engine_heartbeat_disable(engine);
+
+			err = __rps_up_interrupt(rps, engine, &spin);
+
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			if (err)
+				goto out;
+
+			intel_gt_pm_wait_for_idle(engine->gt);
+		}
+
+		/* Keep the engine awake but idle and check for DOWN */
+		if (pm_events & GEN6_PM_RP_DOWN_THRESHOLD) {
+			unsigned long saved_heartbeat;
+
+			saved_heartbeat = engine_heartbeat_disable(engine);
+			intel_rc6_disable(&gt->rc6);
+
+			err = __rps_down_interrupt(rps, engine);
+
+			intel_rc6_enable(&gt->rc6);
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			if (err)
+				goto out;
+		}
+	}
+
+out:
+	if (igt_flush_test(gt->i915))
+		err = -EIO;
+
+	igt_spinner_fini(&spin);
+
+	intel_gt_pm_wait_for_idle(gt);
+	rps->work.func = saved_work;
+
+	return err;
+}
+
+static u64 __measure_power(int duration_ms)
+{
+	u64 dE, dt;
+
+	dt = ktime_get();
+	dE = librapl_energy_uJ();
+	usleep_range(1000 * duration_ms, 2000 * duration_ms);
+	dE = librapl_energy_uJ() - dE;
+	dt = ktime_get() - dt;
+
+	return div64_u64(1000 * 1000 * dE, dt);
+}
+
+static u64 measure_power_at(struct intel_rps *rps, int *freq)
+{
+	u64 x[5];
+	int i;
+
+	*freq = rps_set_check(rps, *freq);
+	for (i = 0; i < 5; i++)
+		x[i] = __measure_power(5);
+	*freq = (*freq + read_cagf(rps)) / 2;
+
+	/* A simple triangle filter for better result stability */
+	sort(x, 5, sizeof(*x), cmp_u64, NULL);
+	return div_u64(x[1] + 2 * x[2] + x[3], 4);
+}
+
+int live_rps_power(void *arg)
+{
+	struct intel_gt *gt = arg;
+	struct intel_rps *rps = &gt->rps;
+	void (*saved_work)(struct work_struct *wrk);
+	struct intel_engine_cs *engine;
+	enum intel_engine_id id;
+	struct igt_spinner spin;
+	int err = 0;
+
+	/*
+	 * Our fundamental assumption is that running at lower frequency
+	 * actually saves power. Let's see if our RAPL measurement support
+	 * that theory.
+	 */
+
+	if (!intel_rps_is_enabled(rps))
+		return 0;
+
+	if (!librapl_energy_uJ())
+		return 0;
+
+	if (igt_spinner_init(&spin, gt))
+		return -ENOMEM;
+
+	intel_gt_pm_wait_for_idle(gt);
+	saved_work = rps->work.func;
+	rps->work.func = dummy_rps_work;
+
+	for_each_engine(engine, gt, id) {
+		unsigned long saved_heartbeat;
+		struct i915_request *rq;
+		struct {
+			u64 power;
+			int freq;
+		} min, max;
+
+		if (!intel_engine_can_store_dword(engine))
+			continue;
+
+		saved_heartbeat = engine_heartbeat_disable(engine);
+
+		rq = igt_spinner_create_request(&spin,
+						engine->kernel_context,
+						MI_NOOP);
+		if (IS_ERR(rq)) {
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			err = PTR_ERR(rq);
+			break;
+		}
+
+		i915_request_add(rq);
+
+		if (!igt_wait_for_spinner(&spin, rq)) {
+			pr_err("%s: RPS spinner did not start\n",
+			       engine->name);
+			igt_spinner_end(&spin);
+			engine_heartbeat_enable(engine, saved_heartbeat);
+			intel_gt_set_wedged(engine->gt);
+			err = -EIO;
+			break;
+		}
+
+		max.freq = rps->max_freq;
+		max.power = measure_power_at(rps, &max.freq);
+
+		min.freq = rps->min_freq;
+		min.power = measure_power_at(rps, &min.freq);
+
+		igt_spinner_end(&spin);
+		engine_heartbeat_enable(engine, saved_heartbeat);
+
+		pr_info("%s: min:%llumW @ %uMHz, max:%llumW @ %uMHz\n",
+			engine->name,
+			min.power, intel_gpu_freq(rps, min.freq),
+			max.power, intel_gpu_freq(rps, max.freq));
+
+		if (10 * min.freq >= 9 * max.freq) {
+			pr_notice("Could not control frequency, ran at [%d:%uMHz, %d:%uMhz]\n",
+				  min.freq, intel_gpu_freq(rps, min.freq),
+				  max.freq, intel_gpu_freq(rps, max.freq));
+			continue;
+		}
+
+		if (11 * min.power > 10 * max.power) {
+			pr_err("%s: did not conserve power when setting lower frequency!\n",
+			       engine->name);
+			err = -EINVAL;
+			break;
+		}
+
+		if (igt_flush_test(gt->i915)) {
+			err = -EIO;
+			break;
+		}
+	}
+
+	igt_spinner_fini(&spin);
+
+	intel_gt_pm_wait_for_idle(gt);
+	rps->work.func = saved_work;
+
+	return err;
+}
+
+int live_rps_dynamic(void *arg)
+{
+	struct intel_gt *gt = arg;
+	struct intel_rps *rps = &gt->rps;
+	struct intel_engine_cs *engine;
+	enum intel_engine_id id;
+	struct igt_spinner spin;
+	int err = 0;
+
+	/*
+	 * We've looked at the bascs, and have established that we
+	 * can change the clock frequency and that the HW will generate
+	 * interrupts based on load. Now we check how we integrate those
+	 * moving parts into dynamic reclocking based on load.
+	 */
+
+	if (!intel_rps_is_enabled(rps))
+		return 0;
+
+	if (igt_spinner_init(&spin, gt))
+		return -ENOMEM;
+
+	for_each_engine(engine, gt, id) {
+		struct i915_request *rq;
+		struct {
+			ktime_t dt;
+			u8 freq;
+		} min, max;
+
+		if (!intel_engine_can_store_dword(engine))
+			continue;
+
+		intel_gt_pm_wait_for_idle(gt);
+		GEM_BUG_ON(intel_rps_is_active(rps));
+		rps->cur_freq = rps->min_freq;
+
+		intel_engine_pm_get(engine);
+		intel_rc6_disable(&gt->rc6);
+		GEM_BUG_ON(rps->last_freq != rps->min_freq);
+
+		rq = igt_spinner_create_request(&spin,
+						engine->kernel_context,
+						MI_NOOP);
+		if (IS_ERR(rq)) {
+			err = PTR_ERR(rq);
+			goto err;
+		}
+
+		i915_request_add(rq);
+
+		max.dt = ktime_get();
+		max.freq = wait_for_freq(rps, rps->max_freq, 500);
+		max.dt = ktime_sub(ktime_get(), max.dt);
+
+		igt_spinner_end(&spin);
+
+		min.dt = ktime_get();
+		min.freq = wait_for_freq(rps, rps->min_freq, 2000);
+		min.dt = ktime_sub(ktime_get(), min.dt);
+
+		pr_info("%s: dynamically reclocked to %u:%uMHz while busy in %lluns, and %u:%uMHz while idle in %lluns\n",
+			engine->name,
+			max.freq, intel_gpu_freq(rps, max.freq),
+			ktime_to_ns(max.dt),
+			min.freq, intel_gpu_freq(rps, min.freq),
+			ktime_to_ns(min.dt));
+		if (min.freq >= max.freq) {
+			pr_err("%s: dynamic reclocking of spinner failed\n!",
+			       engine->name);
+			err = -EINVAL;
+		}
+
+err:
+		intel_rc6_enable(&gt->rc6);
+		intel_engine_pm_put(engine);
+
+		if (igt_flush_test(gt->i915))
+			err = -EIO;
+		if (err)
+			break;
+	}
+
+	igt_spinner_fini(&spin);
+
+	return err;
+}
diff --git a/drivers/gpu/drm/i915/gt/selftest_rps.h b/drivers/gpu/drm/i915/gt/selftest_rps.h
new file mode 100644
index 000000000000..6e82a631cfa1
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/selftest_rps.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef SELFTEST_RPS_H
+#define SELFTEST_RPS_H
+
+int live_rps_control(void *arg);
+int live_rps_clock_interval(void *arg);
+int live_rps_frequency_cs(void *arg);
+int live_rps_frequency_srm(void *arg);
+int live_rps_power(void *arg);
+int live_rps_interrupt(void *arg);
+int live_rps_dynamic(void *arg);
+
+#endif /* SELFTEST_RPS_H */
diff --git a/drivers/gpu/drm/i915/gt/shmem_utils.c b/drivers/gpu/drm/i915/gt/shmem_utils.c
new file mode 100644
index 000000000000..43c7acbdc79d
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/shmem_utils.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/shmem_fs.h>
+
+#include "gem/i915_gem_object.h"
+#include "shmem_utils.h"
+
+struct file *shmem_create_from_data(const char *name, void *data, size_t len)
+{
+	struct file *file;
+	int err;
+
+	file = shmem_file_setup(name, PAGE_ALIGN(len), VM_NORESERVE);
+	if (IS_ERR(file))
+		return file;
+
+	err = shmem_write(file, 0, data, len);
+	if (err) {
+		fput(file);
+		return ERR_PTR(err);
+	}
+
+	return file;
+}
+
+struct file *shmem_create_from_object(struct drm_i915_gem_object *obj)
+{
+	struct file *file;
+	void *ptr;
+
+	if (obj->ops == &i915_gem_shmem_ops) {
+		file = obj->base.filp;
+		atomic_long_inc(&file->f_count);
+		return file;
+	}
+
+	ptr = i915_gem_object_pin_map(obj, I915_MAP_WB);
+	if (IS_ERR(ptr))
+		return ERR_CAST(ptr);
+
+	file = shmem_create_from_data("", ptr, obj->base.size);
+	i915_gem_object_unpin_map(obj);
+
+	return file;
+}
+
+static size_t shmem_npte(struct file *file)
+{
+	return file->f_mapping->host->i_size >> PAGE_SHIFT;
+}
+
+static void __shmem_unpin_map(struct file *file, void *ptr, size_t n_pte)
+{
+	unsigned long pfn;
+
+	vunmap(ptr);
+
+	for (pfn = 0; pfn < n_pte; pfn++) {
+		struct page *page;
+
+		page = shmem_read_mapping_page_gfp(file->f_mapping, pfn,
+						   GFP_KERNEL);
+		if (!WARN_ON(IS_ERR(page))) {
+			put_page(page);
+			put_page(page);
+		}
+	}
+}
+
+void *shmem_pin_map(struct file *file)
+{
+	const size_t n_pte = shmem_npte(file);
+	pte_t *stack[32], **ptes, **mem;
+	struct vm_struct *area;
+	unsigned long pfn;
+
+	mem = stack;
+	if (n_pte > ARRAY_SIZE(stack)) {
+		mem = kvmalloc_array(n_pte, sizeof(*mem), GFP_KERNEL);
+		if (!mem)
+			return NULL;
+	}
+
+	area = alloc_vm_area(n_pte << PAGE_SHIFT, mem);
+	if (!area) {
+		if (mem != stack)
+			kvfree(mem);
+		return NULL;
+	}
+
+	ptes = mem;
+	for (pfn = 0; pfn < n_pte; pfn++) {
+		struct page *page;
+
+		page = shmem_read_mapping_page_gfp(file->f_mapping, pfn,
+						   GFP_KERNEL);
+		if (IS_ERR(page))
+			goto err_page;
+
+		**ptes++ = mk_pte(page,  PAGE_KERNEL);
+	}
+
+	if (mem != stack)
+		kvfree(mem);
+
+	mapping_set_unevictable(file->f_mapping);
+	return area->addr;
+
+err_page:
+	if (mem != stack)
+		kvfree(mem);
+
+	__shmem_unpin_map(file, area->addr, pfn);
+	return NULL;
+}
+
+void shmem_unpin_map(struct file *file, void *ptr)
+{
+	mapping_clear_unevictable(file->f_mapping);
+	__shmem_unpin_map(file, ptr, shmem_npte(file));
+}
+
+static int __shmem_rw(struct file *file, loff_t off,
+		      void *ptr, size_t len,
+		      bool write)
+{
+	unsigned long pfn;
+
+	for (pfn = off >> PAGE_SHIFT; len; pfn++) {
+		unsigned int this =
+			min_t(size_t, PAGE_SIZE - offset_in_page(off), len);
+		struct page *page;
+		void *vaddr;
+
+		page = shmem_read_mapping_page_gfp(file->f_mapping, pfn,
+						   GFP_KERNEL);
+		if (IS_ERR(page))
+			return PTR_ERR(page);
+
+		vaddr = kmap(page);
+		if (write)
+			memcpy(vaddr + offset_in_page(off), ptr, this);
+		else
+			memcpy(ptr, vaddr + offset_in_page(off), this);
+		kunmap(page);
+		put_page(page);
+
+		len -= this;
+		ptr += this;
+		off = 0;
+	}
+
+	return 0;
+}
+
+int shmem_read(struct file *file, loff_t off, void *dst, size_t len)
+{
+	return __shmem_rw(file, off, dst, len, false);
+}
+
+int shmem_write(struct file *file, loff_t off, void *src, size_t len)
+{
+	return __shmem_rw(file, off, src, len, true);
+}
+
+#if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
+#include "st_shmem_utils.c"
+#endif
diff --git a/drivers/gpu/drm/i915/gt/shmem_utils.h b/drivers/gpu/drm/i915/gt/shmem_utils.h
new file mode 100644
index 000000000000..c1669170c351
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/shmem_utils.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef SHMEM_UTILS_H
+#define SHMEM_UTILS_H
+
+#include <linux/types.h>
+
+struct drm_i915_gem_object;
+struct file;
+
+struct file *shmem_create_from_data(const char *name, void *data, size_t len);
+struct file *shmem_create_from_object(struct drm_i915_gem_object *obj);
+
+void *shmem_pin_map(struct file *file);
+void shmem_unpin_map(struct file *file, void *ptr);
+
+int shmem_read(struct file *file, loff_t off, void *dst, size_t len);
+int shmem_write(struct file *file, loff_t off, void *src, size_t len);
+
+#endif /* SHMEM_UTILS_H */
diff --git a/drivers/gpu/drm/i915/gt/st_shmem_utils.c b/drivers/gpu/drm/i915/gt/st_shmem_utils.c
new file mode 100644
index 000000000000..b279fe88b70e
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/st_shmem_utils.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+/* Just a quick and causal check of the shmem_utils API */
+
+static int igt_shmem_basic(void *ignored)
+{
+	u32 datum = 0xdeadbeef, result;
+	struct file *file;
+	u32 *map;
+	int err;
+
+	file = shmem_create_from_data("mock", &datum, sizeof(datum));
+	if (IS_ERR(file))
+		return PTR_ERR(file);
+
+	result = 0;
+	err = shmem_read(file, 0, &result, sizeof(result));
+	if (err)
+		goto out_file;
+
+	if (result != datum) {
+		pr_err("Incorrect read back from shmemfs: %x != %x\n",
+		       result, datum);
+		err = -EINVAL;
+		goto out_file;
+	}
+
+	result = 0xc0ffee;
+	err = shmem_write(file, 0, &result, sizeof(result));
+	if (err)
+		goto out_file;
+
+	map = shmem_pin_map(file);
+	if (!map) {
+		err = -ENOMEM;
+		goto out_file;
+	}
+
+	if (*map != result) {
+		pr_err("Incorrect read back via mmap of last write: %x != %x\n",
+		       *map, result);
+		err = -EINVAL;
+		goto out_map;
+	}
+
+out_map:
+	shmem_unpin_map(file, map);
+out_file:
+	fput(file);
+	return err;
+}
+
+int shmem_utils_mock_selftests(void)
+{
+	static const struct i915_subtest tests[] = {
+		SUBTEST(igt_shmem_basic),
+	};
+
+	return i915_subtests(tests, NULL);
+}
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc.c b/drivers/gpu/drm/i915/gt/uc/intel_guc.c
index 819f09ef51fc..861657897c0f 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc.c
@@ -169,7 +169,7 @@ void intel_guc_init_early(struct intel_guc *guc)
 {
 	struct drm_i915_private *i915 = guc_to_gt(guc)->i915;
 
-	intel_guc_fw_init_early(guc);
+	intel_uc_fw_init_early(&guc->fw, INTEL_UC_FW_TYPE_GUC);
 	intel_guc_ct_init_early(&guc->ct);
 	intel_guc_log_init_early(&guc->log);
 	intel_guc_submission_init_early(guc);
@@ -723,3 +723,47 @@ int intel_guc_allocate_and_map_vma(struct intel_guc *guc, u32 size,
 
 	return 0;
 }
+
+/**
+ * intel_guc_load_status - dump information about GuC load status
+ * @guc: the GuC
+ * @p: the &drm_printer
+ *
+ * Pretty printer for GuC load status.
+ */
+void intel_guc_load_status(struct intel_guc *guc, struct drm_printer *p)
+{
+	struct intel_gt *gt = guc_to_gt(guc);
+	struct intel_uncore *uncore = gt->uncore;
+	intel_wakeref_t wakeref;
+
+	if (!intel_guc_is_supported(guc)) {
+		drm_printf(p, "GuC not supported\n");
+		return;
+	}
+
+	if (!intel_guc_is_wanted(guc)) {
+		drm_printf(p, "GuC disabled\n");
+		return;
+	}
+
+	intel_uc_fw_dump(&guc->fw, p);
+
+	with_intel_runtime_pm(uncore->rpm, wakeref) {
+		u32 status = intel_uncore_read(uncore, GUC_STATUS);
+		u32 i;
+
+		drm_printf(p, "\nGuC status 0x%08x:\n", status);
+		drm_printf(p, "\tBootrom status = 0x%x\n",
+			   (status & GS_BOOTROM_MASK) >> GS_BOOTROM_SHIFT);
+		drm_printf(p, "\tuKernel status = 0x%x\n",
+			   (status & GS_UKERNEL_MASK) >> GS_UKERNEL_SHIFT);
+		drm_printf(p, "\tMIA Core status = 0x%x\n",
+			   (status & GS_MIA_MASK) >> GS_MIA_SHIFT);
+		drm_puts(p, "\nScratch registers:\n");
+		for (i = 0; i < 16; i++) {
+			drm_printf(p, "\t%2d: \t0x%x\n",
+				   i, intel_uncore_read(uncore, SOFT_SCRATCH(i)));
+		}
+	}
+}
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc.h b/drivers/gpu/drm/i915/gt/uc/intel_guc.h
index 4594ccbeaa34..e84ab67b317d 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc.h
@@ -74,6 +74,11 @@ struct intel_guc {
 	struct mutex send_mutex;
 };
 
+static inline struct intel_guc *log_to_guc(struct intel_guc_log *log)
+{
+	return container_of(log, struct intel_guc, log);
+}
+
 static
 inline int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len)
 {
@@ -190,4 +195,6 @@ static inline void intel_guc_disable_msg(struct intel_guc *guc, u32 mask)
 int intel_guc_reset_engine(struct intel_guc *guc,
 			   struct intel_engine_cs *engine);
 
+void intel_guc_load_status(struct intel_guc *guc, struct drm_printer *p);
+
 #endif
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.c
new file mode 100644
index 000000000000..fe7cb7b29a1e
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#include <drm/drm_print.h>
+
+#include "gt/debugfs_gt.h"
+#include "intel_guc.h"
+#include "intel_guc_debugfs.h"
+#include "intel_guc_log_debugfs.h"
+
+static int guc_info_show(struct seq_file *m, void *data)
+{
+	struct intel_guc *guc = m->private;
+	struct drm_printer p = drm_seq_file_printer(m);
+
+	if (!intel_guc_is_supported(guc))
+		return -ENODEV;
+
+	intel_guc_load_status(guc, &p);
+	drm_puts(&p, "\n");
+	intel_guc_log_info(&guc->log, &p);
+
+	/* Add more as required ... */
+
+	return 0;
+}
+DEFINE_GT_DEBUGFS_ATTRIBUTE(guc_info);
+
+void intel_guc_debugfs_register(struct intel_guc *guc, struct dentry *root)
+{
+	static const struct debugfs_gt_file files[] = {
+		{ "guc_info", &guc_info_fops, NULL },
+	};
+
+	if (!intel_guc_is_supported(guc))
+		return;
+
+	intel_gt_debugfs_register_files(root, files, ARRAY_SIZE(files), guc);
+	intel_guc_log_debugfs_register(&guc->log, root);
+}
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.h
new file mode 100644
index 000000000000..424c26665cf1
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_debugfs.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef DEBUGFS_GUC_H
+#define DEBUGFS_GUC_H
+
+struct intel_guc;
+struct dentry;
+
+void intel_guc_debugfs_register(struct intel_guc *guc, struct dentry *root);
+
+#endif /* DEBUGFS_GUC_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c
index 3a1c47d600ea..d4a87f4c9421 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c
@@ -13,20 +13,6 @@
 #include "intel_guc_fw.h"
 #include "i915_drv.h"
 
-/**
- * intel_guc_fw_init_early() - initializes GuC firmware struct
- * @guc: intel_guc struct
- *
- * On platforms with GuC selects firmware for uploading
- */
-void intel_guc_fw_init_early(struct intel_guc *guc)
-{
-	struct drm_i915_private *i915 = guc_to_gt(guc)->i915;
-
-	intel_uc_fw_init_early(&guc->fw, INTEL_UC_FW_TYPE_GUC, HAS_GT_UC(i915),
-			       INTEL_INFO(i915)->platform, INTEL_REVID(i915));
-}
-
 static void guc_prepare_xfer(struct intel_uncore *uncore)
 {
 	u32 shim_flags = GUC_DISABLE_SRAM_INIT_TO_ZEROES |
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.h
index b5ab639d7259..0b4d2a9c9435 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.h
@@ -8,7 +8,6 @@
 
 struct intel_guc;
 
-void intel_guc_fw_init_early(struct intel_guc *guc);
 int intel_guc_fw_upload(struct intel_guc *guc);
 
 #endif
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_log.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_log.c
index caed0d57e704..fb10f3597ea5 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_log.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_log.c
@@ -55,11 +55,6 @@ static int guc_action_control_log(struct intel_guc *guc, bool enable,
 	return intel_guc_send(guc, action, ARRAY_SIZE(action));
 }
 
-static inline struct intel_guc *log_to_guc(struct intel_guc_log *log)
-{
-	return container_of(log, struct intel_guc, log);
-}
-
 static void guc_log_enable_flush_events(struct intel_guc_log *log)
 {
 	intel_guc_enable_msg(log_to_guc(log),
@@ -672,3 +667,95 @@ void intel_guc_log_handle_flush_event(struct intel_guc_log *log)
 {
 	queue_work(system_highpri_wq, &log->relay.flush_work);
 }
+
+static const char *
+stringify_guc_log_type(enum guc_log_buffer_type type)
+{
+	switch (type) {
+	case GUC_ISR_LOG_BUFFER:
+		return "ISR";
+	case GUC_DPC_LOG_BUFFER:
+		return "DPC";
+	case GUC_CRASH_DUMP_LOG_BUFFER:
+		return "CRASH";
+	default:
+		MISSING_CASE(type);
+	}
+
+	return "";
+}
+
+/**
+ * intel_guc_log_info - dump information about GuC log relay
+ * @log: the GuC log
+ * @p: the &drm_printer
+ *
+ * Pretty printer for GuC log info
+ */
+void intel_guc_log_info(struct intel_guc_log *log, struct drm_printer *p)
+{
+	enum guc_log_buffer_type type;
+
+	if (!intel_guc_log_relay_created(log)) {
+		drm_puts(p, "GuC log relay not created\n");
+		return;
+	}
+
+	drm_puts(p, "GuC logging stats:\n");
+
+	drm_printf(p, "\tRelay full count: %u\n", log->relay.full_count);
+
+	for (type = GUC_ISR_LOG_BUFFER; type < GUC_MAX_LOG_BUFFER; type++) {
+		drm_printf(p, "\t%s:\tflush count %10u, overflow count %10u\n",
+			   stringify_guc_log_type(type),
+			   log->stats[type].flush,
+			   log->stats[type].sampled_overflow);
+	}
+}
+
+/**
+ * intel_guc_log_dump - dump the contents of the GuC log
+ * @log: the GuC log
+ * @p: the &drm_printer
+ * @dump_load_err: dump the log saved on GuC load error
+ *
+ * Pretty printer for the GuC log
+ */
+int intel_guc_log_dump(struct intel_guc_log *log, struct drm_printer *p,
+		       bool dump_load_err)
+{
+	struct intel_guc *guc = log_to_guc(log);
+	struct intel_uc *uc = container_of(guc, struct intel_uc, guc);
+	struct drm_i915_gem_object *obj = NULL;
+	u32 *map;
+	int i = 0;
+
+	if (!intel_guc_is_supported(guc))
+		return -ENODEV;
+
+	if (dump_load_err)
+		obj = uc->load_err_log;
+	else if (guc->log.vma)
+		obj = guc->log.vma->obj;
+
+	if (!obj)
+		return 0;
+
+	map = i915_gem_object_pin_map(obj, I915_MAP_WC);
+	if (IS_ERR(map)) {
+		DRM_DEBUG("Failed to pin object\n");
+		drm_puts(p, "(log data unaccessible)\n");
+		return PTR_ERR(map);
+	}
+
+	for (i = 0; i < obj->base.size / sizeof(u32); i += 4)
+		drm_printf(p, "0x%08x 0x%08x 0x%08x 0x%08x\n",
+			   *(map + i), *(map + i + 1),
+			   *(map + i + 2), *(map + i + 3));
+
+	drm_puts(p, "\n");
+
+	i915_gem_object_unpin_map(obj);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_log.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_log.h
index c252c022c5fc..11fccd0b2294 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_log.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_log.h
@@ -79,4 +79,8 @@ static inline u32 intel_guc_log_get_level(struct intel_guc_log *log)
 	return log->level;
 }
 
+void intel_guc_log_info(struct intel_guc_log *log, struct drm_printer *p);
+int intel_guc_log_dump(struct intel_guc_log *log, struct drm_printer *p,
+		       bool dump_load_err);
+
 #endif
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.c
new file mode 100644
index 000000000000..129e0cf7dfe2
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#include <linux/fs.h>
+#include <drm/drm_print.h>
+
+#include "gt/debugfs_gt.h"
+#include "intel_guc.h"
+#include "intel_guc_log.h"
+#include "intel_guc_log_debugfs.h"
+
+static int guc_log_dump_show(struct seq_file *m, void *data)
+{
+	struct drm_printer p = drm_seq_file_printer(m);
+
+	return intel_guc_log_dump(m->private, &p, false);
+}
+DEFINE_GT_DEBUGFS_ATTRIBUTE(guc_log_dump);
+
+static int guc_load_err_log_dump_show(struct seq_file *m, void *data)
+{
+	struct drm_printer p = drm_seq_file_printer(m);
+
+	return intel_guc_log_dump(m->private, &p, true);
+}
+DEFINE_GT_DEBUGFS_ATTRIBUTE(guc_load_err_log_dump);
+
+static int guc_log_level_get(void *data, u64 *val)
+{
+	struct intel_guc_log *log = data;
+
+	if (!intel_guc_is_used(log_to_guc(log)))
+		return -ENODEV;
+
+	*val = intel_guc_log_get_level(log);
+
+	return 0;
+}
+
+static int guc_log_level_set(void *data, u64 val)
+{
+	struct intel_guc_log *log = data;
+
+	if (!intel_guc_is_used(log_to_guc(log)))
+		return -ENODEV;
+
+	return intel_guc_log_set_level(log, val);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(guc_log_level_fops,
+			guc_log_level_get, guc_log_level_set,
+			"%lld\n");
+
+static int guc_log_relay_open(struct inode *inode, struct file *file)
+{
+	struct intel_guc_log *log = inode->i_private;
+
+	if (!intel_guc_is_ready(log_to_guc(log)))
+		return -ENODEV;
+
+	file->private_data = log;
+
+	return intel_guc_log_relay_open(log);
+}
+
+static ssize_t
+guc_log_relay_write(struct file *filp,
+		    const char __user *ubuf,
+		    size_t cnt,
+		    loff_t *ppos)
+{
+	struct intel_guc_log *log = filp->private_data;
+	int val;
+	int ret;
+
+	ret = kstrtoint_from_user(ubuf, cnt, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Enable and start the guc log relay on value of 1.
+	 * Flush log relay for any other value.
+	 */
+	if (val == 1)
+		ret = intel_guc_log_relay_start(log);
+	else
+		intel_guc_log_relay_flush(log);
+
+	return ret ?: cnt;
+}
+
+static int guc_log_relay_release(struct inode *inode, struct file *file)
+{
+	struct intel_guc_log *log = inode->i_private;
+
+	intel_guc_log_relay_close(log);
+	return 0;
+}
+
+static const struct file_operations guc_log_relay_fops = {
+	.owner = THIS_MODULE,
+	.open = guc_log_relay_open,
+	.write = guc_log_relay_write,
+	.release = guc_log_relay_release,
+};
+
+void intel_guc_log_debugfs_register(struct intel_guc_log *log,
+				    struct dentry *root)
+{
+	static const struct debugfs_gt_file files[] = {
+		{ "guc_log_dump", &guc_log_dump_fops, NULL },
+		{ "guc_load_err_log_dump", &guc_load_err_log_dump_fops, NULL },
+		{ "guc_log_level", &guc_log_level_fops, NULL },
+		{ "guc_log_relay", &guc_log_relay_fops, NULL },
+	};
+
+	if (!intel_guc_is_supported(log_to_guc(log)))
+		return;
+
+	intel_gt_debugfs_register_files(root, files, ARRAY_SIZE(files), log);
+}
+
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.h
new file mode 100644
index 000000000000..e8900e3d74ea
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_log_debugfs.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef DEBUGFS_GUC_LOG_H
+#define DEBUGFS_GUC_LOG_H
+
+struct intel_guc_log;
+struct dentry;
+
+void intel_guc_log_debugfs_register(struct intel_guc_log *log,
+				    struct dentry *root);
+
+#endif /* DEBUGFS_GUC_LOG_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
index fe7778c28d2d..aa6d56e25a10 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -217,7 +217,7 @@ static void guc_wq_item_append(struct intel_guc *guc,
 static void guc_add_request(struct intel_guc *guc, struct i915_request *rq)
 {
 	struct intel_engine_cs *engine = rq->engine;
-	u32 ctx_desc = lower_32_bits(rq->context->lrc_desc);
+	u32 ctx_desc = rq->context->lrc.ccid;
 	u32 ring_tail = intel_ring_set_tail(rq->ring, rq->tail) / sizeof(u64);
 
 	guc_wq_item_append(guc, engine->guc_id, ctx_desc,
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_huc.c b/drivers/gpu/drm/i915/gt/uc/intel_huc.c
index a74b65694512..65eeb44b397d 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_huc.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_huc.c
@@ -41,7 +41,7 @@ void intel_huc_init_early(struct intel_huc *huc)
 {
 	struct drm_i915_private *i915 = huc_to_gt(huc)->i915;
 
-	intel_huc_fw_init_early(huc);
+	intel_uc_fw_init_early(&huc->fw, INTEL_UC_FW_TYPE_HUC);
 
 	if (INTEL_GEN(i915) >= 11) {
 		huc->status.reg = GEN11_HUC_KERNEL_LOAD_INFO;
@@ -200,9 +200,13 @@ int intel_huc_auth(struct intel_huc *huc)
  * This function reads status register to verify if HuC
  * firmware was successfully loaded.
  *
- * Returns: 1 if HuC firmware is loaded and verified,
- * 0 if HuC firmware is not loaded and -ENODEV if HuC
- * is not present on this platform.
+ * Returns:
+ *  * -ENODEV if HuC is not present on this platform,
+ *  * -EOPNOTSUPP if HuC firmware is disabled,
+ *  * -ENOPKG if HuC firmware was not installed,
+ *  * -ENOEXEC if HuC firmware is invalid or mismatched,
+ *  * 0 if HuC firmware is not running,
+ *  * 1 if HuC firmware is authenticated and running.
  */
 int intel_huc_check_status(struct intel_huc *huc)
 {
@@ -210,11 +214,50 @@ int intel_huc_check_status(struct intel_huc *huc)
 	intel_wakeref_t wakeref;
 	u32 status = 0;
 
-	if (!intel_huc_is_supported(huc))
+	switch (__intel_uc_fw_status(&huc->fw)) {
+	case INTEL_UC_FIRMWARE_NOT_SUPPORTED:
 		return -ENODEV;
+	case INTEL_UC_FIRMWARE_DISABLED:
+		return -EOPNOTSUPP;
+	case INTEL_UC_FIRMWARE_MISSING:
+		return -ENOPKG;
+	case INTEL_UC_FIRMWARE_ERROR:
+		return -ENOEXEC;
+	default:
+		break;
+	}
 
 	with_intel_runtime_pm(gt->uncore->rpm, wakeref)
 		status = intel_uncore_read(gt->uncore, huc->status.reg);
 
 	return (status & huc->status.mask) == huc->status.value;
 }
+
+/**
+ * intel_huc_load_status - dump information about HuC load status
+ * @huc: the HuC
+ * @p: the &drm_printer
+ *
+ * Pretty printer for HuC load status.
+ */
+void intel_huc_load_status(struct intel_huc *huc, struct drm_printer *p)
+{
+	struct intel_gt *gt = huc_to_gt(huc);
+	intel_wakeref_t wakeref;
+
+	if (!intel_huc_is_supported(huc)) {
+		drm_printf(p, "HuC not supported\n");
+		return;
+	}
+
+	if (!intel_huc_is_wanted(huc)) {
+		drm_printf(p, "HuC disabled\n");
+		return;
+	}
+
+	intel_uc_fw_dump(&huc->fw, p);
+
+	with_intel_runtime_pm(gt->uncore->rpm, wakeref)
+		drm_printf(p, "HuC status: 0x%08x\n",
+			   intel_uncore_read(gt->uncore, huc->status.reg));
+}
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_huc.h b/drivers/gpu/drm/i915/gt/uc/intel_huc.h
index a40b9cfc6c22..daee43b661d4 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_huc.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_huc.h
@@ -57,4 +57,6 @@ static inline bool intel_huc_is_authenticated(struct intel_huc *huc)
 	return intel_uc_fw_is_running(&huc->fw);
 }
 
+void intel_huc_load_status(struct intel_huc *huc, struct drm_printer *p);
+
 #endif
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.c b/drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.c
new file mode 100644
index 000000000000..5733c15fd123
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#include <drm/drm_print.h>
+
+#include "gt/debugfs_gt.h"
+#include "intel_huc.h"
+#include "intel_huc_debugfs.h"
+
+static int huc_info_show(struct seq_file *m, void *data)
+{
+	struct intel_huc *huc = m->private;
+	struct drm_printer p = drm_seq_file_printer(m);
+
+	if (!intel_huc_is_supported(huc))
+		return -ENODEV;
+
+	intel_huc_load_status(huc, &p);
+
+	return 0;
+}
+DEFINE_GT_DEBUGFS_ATTRIBUTE(huc_info);
+
+void intel_huc_debugfs_register(struct intel_huc *huc, struct dentry *root)
+{
+	static const struct debugfs_gt_file files[] = {
+		{ "huc_info", &huc_info_fops, NULL },
+	};
+
+	if (!intel_huc_is_supported(huc))
+		return;
+
+	intel_gt_debugfs_register_files(root, files, ARRAY_SIZE(files), huc);
+}
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.h b/drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.h
new file mode 100644
index 000000000000..be79e992f976
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/intel_huc_debugfs.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef DEBUGFS_HUC_H
+#define DEBUGFS_HUC_H
+
+struct intel_huc;
+struct dentry;
+
+void intel_huc_debugfs_register(struct intel_huc *huc, struct dentry *root);
+
+#endif /* DEBUGFS_HUC_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_huc_fw.c b/drivers/gpu/drm/i915/gt/uc/intel_huc_fw.c
index 9cdf4cbe691c..e5ef509c70e8 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_huc_fw.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_huc_fw.c
@@ -7,23 +7,6 @@
 #include "intel_huc_fw.h"
 #include "i915_drv.h"
 
-/**
- * intel_huc_fw_init_early() - initializes HuC firmware struct
- * @huc: intel_huc struct
- *
- * On platforms with HuC selects firmware for uploading
- */
-void intel_huc_fw_init_early(struct intel_huc *huc)
-{
-	struct intel_gt *gt = huc_to_gt(huc);
-	struct intel_uc *uc = &gt->uc;
-	struct drm_i915_private *i915 = gt->i915;
-
-	intel_uc_fw_init_early(&huc->fw, INTEL_UC_FW_TYPE_HUC,
-			       intel_uc_wants_guc(uc),
-			       INTEL_INFO(i915)->platform, INTEL_REVID(i915));
-}
-
 /**
  * intel_huc_fw_upload() - load HuC uCode to device
  * @huc: intel_huc structure
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_huc_fw.h b/drivers/gpu/drm/i915/gt/uc/intel_huc_fw.h
index b791269ce923..12f264ee3e0b 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_huc_fw.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_huc_fw.h
@@ -8,7 +8,6 @@
 
 struct intel_huc;
 
-void intel_huc_fw_init_early(struct intel_huc *huc);
 int intel_huc_fw_upload(struct intel_huc *huc);
 
 #endif
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc.c b/drivers/gpu/drm/i915/gt/uc/intel_uc.c
index a4cbe06e06bd..f518fe05c6f9 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_uc.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_uc.c
@@ -45,12 +45,12 @@ static void __confirm_options(struct intel_uc *uc)
 {
 	struct drm_i915_private *i915 = uc_to_gt(uc)->i915;
 
-	DRM_DEV_DEBUG_DRIVER(i915->drm.dev,
-			     "enable_guc=%d (guc:%s submission:%s huc:%s)\n",
-			     i915_modparams.enable_guc,
-			     yesno(intel_uc_wants_guc(uc)),
-			     yesno(intel_uc_wants_guc_submission(uc)),
-			     yesno(intel_uc_wants_huc(uc)));
+	drm_dbg(&i915->drm,
+		"enable_guc=%d (guc:%s submission:%s huc:%s)\n",
+		i915_modparams.enable_guc,
+		yesno(intel_uc_wants_guc(uc)),
+		yesno(intel_uc_wants_guc_submission(uc)),
+		yesno(intel_uc_wants_huc(uc)));
 
 	if (i915_modparams.enable_guc == -1)
 		return;
@@ -63,25 +63,25 @@ static void __confirm_options(struct intel_uc *uc)
 	}
 
 	if (!intel_uc_supports_guc(uc))
-		dev_info(i915->drm.dev,
+		drm_info(&i915->drm,
 			 "Incompatible option enable_guc=%d - %s\n",
 			 i915_modparams.enable_guc, "GuC is not supported!");
 
 	if (i915_modparams.enable_guc & ENABLE_GUC_LOAD_HUC &&
 	    !intel_uc_supports_huc(uc))
-		dev_info(i915->drm.dev,
+		drm_info(&i915->drm,
 			 "Incompatible option enable_guc=%d - %s\n",
 			 i915_modparams.enable_guc, "HuC is not supported!");
 
 	if (i915_modparams.enable_guc & ENABLE_GUC_SUBMISSION &&
 	    !intel_uc_supports_guc_submission(uc))
-		dev_info(i915->drm.dev,
+		drm_info(&i915->drm,
 			 "Incompatible option enable_guc=%d - %s\n",
 			 i915_modparams.enable_guc, "GuC submission is N/A");
 
 	if (i915_modparams.enable_guc & ~(ENABLE_GUC_SUBMISSION |
 					  ENABLE_GUC_LOAD_HUC))
-		dev_info(i915->drm.dev,
+		drm_info(&i915->drm,
 			 "Incompatible option enable_guc=%d - %s\n",
 			 i915_modparams.enable_guc, "undocumented flag");
 }
@@ -131,6 +131,13 @@ static void __uc_free_load_err_log(struct intel_uc *uc)
 		i915_gem_object_put(log);
 }
 
+void intel_uc_driver_remove(struct intel_uc *uc)
+{
+	intel_uc_fini_hw(uc);
+	intel_uc_fini(uc);
+	__uc_free_load_err_log(uc);
+}
+
 static inline bool guc_communication_enabled(struct intel_guc *guc)
 {
 	return intel_guc_ct_enabled(&guc->ct);
@@ -311,8 +318,6 @@ static void __uc_fini(struct intel_uc *uc)
 {
 	intel_huc_fini(&uc->huc);
 	intel_guc_fini(&uc->guc);
-
-	__uc_free_load_err_log(uc);
 }
 
 static int __uc_sanitize(struct intel_uc *uc)
@@ -475,14 +480,14 @@ static int __uc_init_hw(struct intel_uc *uc)
 	if (intel_uc_uses_guc_submission(uc))
 		intel_guc_submission_enable(guc);
 
-	dev_info(i915->drm.dev, "%s firmware %s version %u.%u %s:%s\n",
+	drm_info(&i915->drm, "%s firmware %s version %u.%u %s:%s\n",
 		 intel_uc_fw_type_repr(INTEL_UC_FW_TYPE_GUC), guc->fw.path,
 		 guc->fw.major_ver_found, guc->fw.minor_ver_found,
 		 "submission",
 		 enableddisabled(intel_uc_uses_guc_submission(uc)));
 
 	if (intel_uc_uses_huc(uc)) {
-		dev_info(i915->drm.dev, "%s firmware %s version %u.%u %s:%s\n",
+		drm_info(&i915->drm, "%s firmware %s version %u.%u %s:%s\n",
 			 intel_uc_fw_type_repr(INTEL_UC_FW_TYPE_HUC),
 			 huc->fw.path,
 			 huc->fw.major_ver_found, huc->fw.minor_ver_found,
@@ -503,7 +508,7 @@ static int __uc_init_hw(struct intel_uc *uc)
 	__uc_sanitize(uc);
 
 	if (!ret) {
-		dev_notice(i915->drm.dev, "GuC is uninitialized\n");
+		drm_notice(&i915->drm, "GuC is uninitialized\n");
 		/* We want to run without GuC submission */
 		return 0;
 	}
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc.h b/drivers/gpu/drm/i915/gt/uc/intel_uc.h
index 5ae7b50b7dc1..9c954c589edf 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_uc.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_uc.h
@@ -34,6 +34,7 @@ struct intel_uc {
 
 void intel_uc_init_early(struct intel_uc *uc);
 void intel_uc_driver_late_release(struct intel_uc *uc);
+void intel_uc_driver_remove(struct intel_uc *uc);
 void intel_uc_init_mmio(struct intel_uc *uc);
 void intel_uc_reset_prepare(struct intel_uc *uc);
 void intel_uc_suspend(struct intel_uc *uc);
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.c b/drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.c
new file mode 100644
index 000000000000..9d16b784aa0d
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#include <linux/debugfs.h>
+
+#include "intel_guc_debugfs.h"
+#include "intel_huc_debugfs.h"
+#include "intel_uc.h"
+#include "intel_uc_debugfs.h"
+
+void intel_uc_debugfs_register(struct intel_uc *uc, struct dentry *gt_root)
+{
+	struct dentry *root;
+
+	if (!gt_root)
+		return;
+
+	/* GuC and HuC go always in pair, no need to check both */
+	if (!intel_uc_supports_guc(uc))
+		return;
+
+	root = debugfs_create_dir("uc", gt_root);
+	if (IS_ERR(root))
+		return;
+
+	intel_guc_debugfs_register(&uc->guc, root);
+	intel_huc_debugfs_register(&uc->huc, root);
+}
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.h b/drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.h
new file mode 100644
index 000000000000..010ce250d223
--- /dev/null
+++ b/drivers/gpu/drm/i915/gt/uc/intel_uc_debugfs.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef DEBUGFS_UC_H
+#define DEBUGFS_UC_H
+
+struct intel_uc;
+struct dentry;
+
+void intel_uc_debugfs_register(struct intel_uc *uc, struct dentry *gt_root);
+
+#endif /* DEBUGFS_UC_H */
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c b/drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c
index 18c755203688..e1caae93996d 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c
@@ -11,26 +11,32 @@
 #include "intel_uc_fw_abi.h"
 #include "i915_drv.h"
 
-static inline struct intel_gt *__uc_fw_to_gt(struct intel_uc_fw *uc_fw)
+static inline struct intel_gt *
+____uc_fw_to_gt(struct intel_uc_fw *uc_fw, enum intel_uc_fw_type type)
 {
-	GEM_BUG_ON(uc_fw->status == INTEL_UC_FIRMWARE_UNINITIALIZED);
-	if (uc_fw->type == INTEL_UC_FW_TYPE_GUC)
+	if (type == INTEL_UC_FW_TYPE_GUC)
 		return container_of(uc_fw, struct intel_gt, uc.guc.fw);
 
-	GEM_BUG_ON(uc_fw->type != INTEL_UC_FW_TYPE_HUC);
+	GEM_BUG_ON(type != INTEL_UC_FW_TYPE_HUC);
 	return container_of(uc_fw, struct intel_gt, uc.huc.fw);
 }
 
+static inline struct intel_gt *__uc_fw_to_gt(struct intel_uc_fw *uc_fw)
+{
+	GEM_BUG_ON(uc_fw->status == INTEL_UC_FIRMWARE_UNINITIALIZED);
+	return ____uc_fw_to_gt(uc_fw, uc_fw->type);
+}
+
 #ifdef CONFIG_DRM_I915_DEBUG_GUC
 void intel_uc_fw_change_status(struct intel_uc_fw *uc_fw,
 			       enum intel_uc_fw_status status)
 {
 	uc_fw->__status =  status;
-	DRM_DEV_DEBUG_DRIVER(__uc_fw_to_gt(uc_fw)->i915->drm.dev,
-			     "%s firmware -> %s\n",
-			     intel_uc_fw_type_repr(uc_fw->type),
-			     status == INTEL_UC_FIRMWARE_SELECTED ?
-			     uc_fw->path : intel_uc_fw_status_repr(status));
+	drm_dbg(&__uc_fw_to_gt(uc_fw)->i915->drm,
+		"%s firmware -> %s\n",
+		intel_uc_fw_type_repr(uc_fw->type),
+		status == INTEL_UC_FIRMWARE_SELECTED ?
+		uc_fw->path : intel_uc_fw_status_repr(status));
 }
 #endif
 
@@ -187,17 +193,15 @@ static void __uc_fw_user_override(struct intel_uc_fw *uc_fw)
  * intel_uc_fw_init_early - initialize the uC object and select the firmware
  * @uc_fw: uC firmware
  * @type: type of uC
- * @supported: is uC support possible
- * @platform: platform identifier
- * @rev: hardware revision
  *
  * Initialize the state of our uC object and relevant tracking and select the
  * firmware to fetch and load.
  */
 void intel_uc_fw_init_early(struct intel_uc_fw *uc_fw,
-			    enum intel_uc_fw_type type, bool supported,
-			    enum intel_platform platform, u8 rev)
+			    enum intel_uc_fw_type type)
 {
+	struct drm_i915_private *i915 = ____uc_fw_to_gt(uc_fw, type)->i915;
+
 	/*
 	 * we use FIRMWARE_UNINITIALIZED to detect checks against uc_fw->status
 	 * before we're looked at the HW caps to see if we have uc support
@@ -208,8 +212,10 @@ void intel_uc_fw_init_early(struct intel_uc_fw *uc_fw,
 
 	uc_fw->type = type;
 
-	if (supported) {
-		__uc_fw_auto_select(uc_fw, platform, rev);
+	if (HAS_GT_UC(i915)) {
+		__uc_fw_auto_select(uc_fw,
+				    INTEL_INFO(i915)->platform,
+				    INTEL_REVID(i915));
 		__uc_fw_user_override(uc_fw);
 	}
 
@@ -290,7 +296,7 @@ int intel_uc_fw_fetch(struct intel_uc_fw *uc_fw)
 
 	/* Check the size of the blob before examining buffer contents */
 	if (unlikely(fw->size < sizeof(struct uc_css_header))) {
-		dev_warn(dev, "%s firmware %s: invalid size: %zu < %zu\n",
+		drm_warn(&i915->drm, "%s firmware %s: invalid size: %zu < %zu\n",
 			 intel_uc_fw_type_repr(uc_fw->type), uc_fw->path,
 			 fw->size, sizeof(struct uc_css_header));
 		err = -ENODATA;
@@ -303,7 +309,7 @@ int intel_uc_fw_fetch(struct intel_uc_fw *uc_fw)
 	size = (css->header_size_dw - css->key_size_dw - css->modulus_size_dw -
 		css->exponent_size_dw) * sizeof(u32);
 	if (unlikely(size != sizeof(struct uc_css_header))) {
-		dev_warn(dev,
+		drm_warn(&i915->drm,
 			 "%s firmware %s: unexpected header size: %zu != %zu\n",
 			 intel_uc_fw_type_repr(uc_fw->type), uc_fw->path,
 			 fw->size, sizeof(struct uc_css_header));
@@ -316,7 +322,7 @@ int intel_uc_fw_fetch(struct intel_uc_fw *uc_fw)
 
 	/* now RSA */
 	if (unlikely(css->key_size_dw != UOS_RSA_SCRATCH_COUNT)) {
-		dev_warn(dev, "%s firmware %s: unexpected key size: %u != %u\n",
+		drm_warn(&i915->drm, "%s firmware %s: unexpected key size: %u != %u\n",
 			 intel_uc_fw_type_repr(uc_fw->type), uc_fw->path,
 			 css->key_size_dw, UOS_RSA_SCRATCH_COUNT);
 		err = -EPROTO;
@@ -327,7 +333,7 @@ int intel_uc_fw_fetch(struct intel_uc_fw *uc_fw)
 	/* At least, it should have header, uCode and RSA. Size of all three. */
 	size = sizeof(struct uc_css_header) + uc_fw->ucode_size + uc_fw->rsa_size;
 	if (unlikely(fw->size < size)) {
-		dev_warn(dev, "%s firmware %s: invalid size: %zu < %zu\n",
+		drm_warn(&i915->drm, "%s firmware %s: invalid size: %zu < %zu\n",
 			 intel_uc_fw_type_repr(uc_fw->type), uc_fw->path,
 			 fw->size, size);
 		err = -ENOEXEC;
@@ -337,7 +343,7 @@ int intel_uc_fw_fetch(struct intel_uc_fw *uc_fw)
 	/* Sanity check whether this fw is not larger than whole WOPCM memory */
 	size = __intel_uc_fw_get_upload_size(uc_fw);
 	if (unlikely(size >= i915->wopcm.size)) {
-		dev_warn(dev, "%s firmware %s: invalid size: %zu > %zu\n",
+		drm_warn(&i915->drm, "%s firmware %s: invalid size: %zu > %zu\n",
 			 intel_uc_fw_type_repr(uc_fw->type), uc_fw->path,
 			 size, (size_t)i915->wopcm.size);
 		err = -E2BIG;
@@ -352,7 +358,7 @@ int intel_uc_fw_fetch(struct intel_uc_fw *uc_fw)
 
 	if (uc_fw->major_ver_found != uc_fw->major_ver_wanted ||
 	    uc_fw->minor_ver_found < uc_fw->minor_ver_wanted) {
-		dev_notice(dev, "%s firmware %s: unexpected version: %u.%u != %u.%u\n",
+		drm_notice(&i915->drm, "%s firmware %s: unexpected version: %u.%u != %u.%u\n",
 			   intel_uc_fw_type_repr(uc_fw->type), uc_fw->path,
 			   uc_fw->major_ver_found, uc_fw->minor_ver_found,
 			   uc_fw->major_ver_wanted, uc_fw->minor_ver_wanted);
@@ -380,9 +386,9 @@ int intel_uc_fw_fetch(struct intel_uc_fw *uc_fw)
 				  INTEL_UC_FIRMWARE_MISSING :
 				  INTEL_UC_FIRMWARE_ERROR);
 
-	dev_notice(dev, "%s firmware %s: fetch failed with error %d\n",
+	drm_notice(&i915->drm, "%s firmware %s: fetch failed with error %d\n",
 		   intel_uc_fw_type_repr(uc_fw->type), uc_fw->path, err);
-	dev_info(dev, "%s firmware(s) can be downloaded from %s\n",
+	drm_info(&i915->drm, "%s firmware(s) can be downloaded from %s\n",
 		 intel_uc_fw_type_repr(uc_fw->type), INTEL_UC_FIRMWARE_URL);
 
 	release_firmware(fw);		/* OK even if fw is NULL */
@@ -467,7 +473,7 @@ static int uc_fw_xfer(struct intel_uc_fw *uc_fw, u32 dst_offset, u32 dma_flags)
 	/* Wait for DMA to finish */
 	ret = intel_wait_for_register_fw(uncore, DMA_CTRL, START_DMA, 0, 100);
 	if (ret)
-		dev_err(gt->i915->drm.dev, "DMA for %s fw failed, DMA_CTRL=%u\n",
+		drm_err(&gt->i915->drm, "DMA for %s fw failed, DMA_CTRL=%u\n",
 			intel_uc_fw_type_repr(uc_fw->type),
 			intel_uncore_read_fw(uncore, DMA_CTRL));
 
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h b/drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h
index 888ff0de0244..23d3a423ac0f 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h
@@ -239,8 +239,7 @@ static inline u32 intel_uc_fw_get_upload_size(struct intel_uc_fw *uc_fw)
 }
 
 void intel_uc_fw_init_early(struct intel_uc_fw *uc_fw,
-			    enum intel_uc_fw_type type, bool supported,
-			    enum intel_platform platform, u8 rev);
+			    enum intel_uc_fw_type type);
 int intel_uc_fw_fetch(struct intel_uc_fw *uc_fw);
 void intel_uc_fw_cleanup_fetch(struct intel_uc_fw *uc_fw);
 int intel_uc_fw_upload(struct intel_uc_fw *uc_fw, u32 offset, u32 dma_flags);
diff --git a/drivers/gpu/drm/i915/gvt/aperture_gm.c b/drivers/gpu/drm/i915/gvt/aperture_gm.c
index 8b13f091cee2..0d6d59871308 100644
--- a/drivers/gpu/drm/i915/gvt/aperture_gm.c
+++ b/drivers/gpu/drm/i915/gvt/aperture_gm.c
@@ -35,7 +35,7 @@
  */
 
 #include "i915_drv.h"
-#include "i915_gem_fence_reg.h"
+#include "gt/intel_ggtt_fencing.h"
 #include "gvt.h"
 
 static int alloc_gm(struct intel_vgpu *vgpu, bool high_gm)
diff --git a/drivers/gpu/drm/i915/gvt/gvt.c b/drivers/gpu/drm/i915/gvt/gvt.c
index 9e1787867894..c7c561237883 100644
--- a/drivers/gpu/drm/i915/gvt/gvt.c
+++ b/drivers/gpu/drm/i915/gvt/gvt.c
@@ -31,7 +31,6 @@
  */
 
 #include <linux/types.h>
-#include <xen/xen.h>
 #include <linux/kthread.h>
 
 #include "i915_drv.h"
diff --git a/drivers/gpu/drm/i915/gvt/hypercall.h b/drivers/gpu/drm/i915/gvt/hypercall.h
index b17c4a1599cd..b79da5124f83 100644
--- a/drivers/gpu/drm/i915/gvt/hypercall.h
+++ b/drivers/gpu/drm/i915/gvt/hypercall.h
@@ -79,6 +79,4 @@ struct intel_gvt_mpt {
 	bool (*is_valid_gfn)(unsigned long handle, unsigned long gfn);
 };
 
-extern struct intel_gvt_mpt xengt_mpt;
-
 #endif /* _GVT_HYPERCALL_H_ */
diff --git a/drivers/gpu/drm/i915/gvt/kvmgt.c b/drivers/gpu/drm/i915/gvt/kvmgt.c
index eee530453aa6..ad8a9df49f29 100644
--- a/drivers/gpu/drm/i915/gvt/kvmgt.c
+++ b/drivers/gpu/drm/i915/gvt/kvmgt.c
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/mm.h>
-#include <linux/mmu_context.h>
+#include <linux/kthread.h>
 #include <linux/sched/mm.h>
 #include <linux/types.h>
 #include <linux/list.h>
diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c
index cb11c3184085..38234073e0fc 100644
--- a/drivers/gpu/drm/i915/gvt/scheduler.c
+++ b/drivers/gpu/drm/i915/gvt/scheduler.c
@@ -290,7 +290,7 @@ static void
 shadow_context_descriptor_update(struct intel_context *ce,
 				 struct intel_vgpu_workload *workload)
 {
-	u64 desc = ce->lrc_desc;
+	u64 desc = ce->lrc.desc;
 
 	/*
 	 * Update bits 0-11 of the context descriptor which includes flags
@@ -300,7 +300,7 @@ shadow_context_descriptor_update(struct intel_context *ce,
 	desc |= (u64)workload->ctx_desc.addressing_mode <<
 		GEN8_CTX_ADDRESSING_MODE_SHIFT;
 
-	ce->lrc_desc = desc;
+	ce->lrc.desc = desc;
 }
 
 static int copy_workload_to_ring_buffer(struct intel_vgpu_workload *workload)
@@ -595,10 +595,9 @@ static void release_shadow_batch_buffer(struct intel_vgpu_workload *workload)
 			if (bb->va && !IS_ERR(bb->va))
 				i915_gem_object_unpin_map(bb->obj);
 
-			if (bb->vma && !IS_ERR(bb->vma)) {
+			if (bb->vma && !IS_ERR(bb->vma))
 				i915_vma_unpin(bb->vma);
-				i915_vma_close(bb->vma);
-			}
+
 			i915_gem_object_put(bb->obj);
 		}
 		list_del(&bb->list);
diff --git a/drivers/gpu/drm/i915/i915_active.c b/drivers/gpu/drm/i915/i915_active.c
index c4048628188a..d960d0be5bd2 100644
--- a/drivers/gpu/drm/i915/i915_active.c
+++ b/drivers/gpu/drm/i915/i915_active.c
@@ -496,7 +496,7 @@ static int flush_lazy_signals(struct i915_active *ref)
 	return err;
 }
 
-int i915_active_wait(struct i915_active *ref)
+int __i915_active_wait(struct i915_active *ref, int state)
 {
 	int err;
 
@@ -511,7 +511,9 @@ int i915_active_wait(struct i915_active *ref)
 	if (err)
 		return err;
 
-	if (wait_var_event_interruptible(ref, i915_active_is_idle(ref)))
+	if (!i915_active_is_idle(ref) &&
+	    ___wait_var_event(ref, i915_active_is_idle(ref),
+			      state, 0, 0, schedule()))
 		return -EINTR;
 
 	flush_work(&ref->work);
@@ -540,34 +542,88 @@ static int __await_active(struct i915_active_fence *active,
 	return 0;
 }
 
+struct wait_barrier {
+	struct wait_queue_entry base;
+	struct i915_active *ref;
+};
+
+static int
+barrier_wake(wait_queue_entry_t *wq, unsigned int mode, int flags, void *key)
+{
+	struct wait_barrier *wb = container_of(wq, typeof(*wb), base);
+
+	if (i915_active_is_idle(wb->ref)) {
+		list_del(&wq->entry);
+		i915_sw_fence_complete(wq->private);
+		kfree(wq);
+	}
+
+	return 0;
+}
+
+static int __await_barrier(struct i915_active *ref, struct i915_sw_fence *fence)
+{
+	struct wait_barrier *wb;
+
+	wb = kmalloc(sizeof(*wb), GFP_KERNEL);
+	if (unlikely(!wb))
+		return -ENOMEM;
+
+	GEM_BUG_ON(i915_active_is_idle(ref));
+	if (!i915_sw_fence_await(fence)) {
+		kfree(wb);
+		return -EINVAL;
+	}
+
+	wb->base.flags = 0;
+	wb->base.func = barrier_wake;
+	wb->base.private = fence;
+	wb->ref = ref;
+
+	add_wait_queue(__var_waitqueue(ref), &wb->base);
+	return 0;
+}
+
 static int await_active(struct i915_active *ref,
 			unsigned int flags,
 			int (*fn)(void *arg, struct dma_fence *fence),
-			void *arg)
+			void *arg, struct i915_sw_fence *barrier)
 {
 	int err = 0;
 
-	/* We must always wait for the exclusive fence! */
-	if (rcu_access_pointer(ref->excl.fence)) {
+	if (!i915_active_acquire_if_busy(ref))
+		return 0;
+
+	if (flags & I915_ACTIVE_AWAIT_EXCL &&
+	    rcu_access_pointer(ref->excl.fence)) {
 		err = __await_active(&ref->excl, fn, arg);
 		if (err)
-			return err;
+			goto out;
 	}
 
-	if (flags & I915_ACTIVE_AWAIT_ALL && i915_active_acquire_if_busy(ref)) {
+	if (flags & I915_ACTIVE_AWAIT_ACTIVE) {
 		struct active_node *it, *n;
 
 		rbtree_postorder_for_each_entry_safe(it, n, &ref->tree, node) {
 			err = __await_active(&it->base, fn, arg);
 			if (err)
-				break;
+				goto out;
 		}
-		i915_active_release(ref);
+	}
+
+	if (flags & I915_ACTIVE_AWAIT_BARRIER) {
+		err = flush_lazy_signals(ref);
 		if (err)
-			return err;
+			goto out;
+
+		err = __await_barrier(ref, barrier);
+		if (err)
+			goto out;
 	}
 
-	return 0;
+out:
+	i915_active_release(ref);
+	return err;
 }
 
 static int rq_await_fence(void *arg, struct dma_fence *fence)
@@ -579,7 +635,7 @@ int i915_request_await_active(struct i915_request *rq,
 			      struct i915_active *ref,
 			      unsigned int flags)
 {
-	return await_active(ref, flags, rq_await_fence, rq);
+	return await_active(ref, flags, rq_await_fence, rq, &rq->submit);
 }
 
 static int sw_await_fence(void *arg, struct dma_fence *fence)
@@ -592,7 +648,7 @@ int i915_sw_fence_await_active(struct i915_sw_fence *fence,
 			       struct i915_active *ref,
 			       unsigned int flags)
 {
-	return await_active(ref, flags, sw_await_fence, fence);
+	return await_active(ref, flags, sw_await_fence, fence, fence);
 }
 
 #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)
@@ -818,7 +874,7 @@ void i915_active_acquire_barrier(struct i915_active *ref)
 
 		GEM_BUG_ON(!intel_engine_pm_is_awake(engine));
 		llist_add(barrier_to_ll(node), &engine->barrier_tasks);
-		intel_engine_pm_put(engine);
+		intel_engine_pm_put_delay(engine, 1);
 	}
 }
 
@@ -937,6 +993,59 @@ void i915_active_noop(struct dma_fence *fence, struct dma_fence_cb *cb)
 	active_fence_cb(fence, cb);
 }
 
+struct auto_active {
+	struct i915_active base;
+	struct kref ref;
+};
+
+struct i915_active *i915_active_get(struct i915_active *ref)
+{
+	struct auto_active *aa = container_of(ref, typeof(*aa), base);
+
+	kref_get(&aa->ref);
+	return &aa->base;
+}
+
+static void auto_release(struct kref *ref)
+{
+	struct auto_active *aa = container_of(ref, typeof(*aa), ref);
+
+	i915_active_fini(&aa->base);
+	kfree(aa);
+}
+
+void i915_active_put(struct i915_active *ref)
+{
+	struct auto_active *aa = container_of(ref, typeof(*aa), base);
+
+	kref_put(&aa->ref, auto_release);
+}
+
+static int auto_active(struct i915_active *ref)
+{
+	i915_active_get(ref);
+	return 0;
+}
+
+static void auto_retire(struct i915_active *ref)
+{
+	i915_active_put(ref);
+}
+
+struct i915_active *i915_active_create(void)
+{
+	struct auto_active *aa;
+
+	aa = kmalloc(sizeof(*aa), GFP_KERNEL);
+	if (!aa)
+		return NULL;
+
+	kref_init(&aa->ref);
+	i915_active_init(&aa->base, auto_active, auto_retire);
+
+	return &aa->base;
+}
+
 #if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
 #include "selftests/i915_active.c"
 #endif
diff --git a/drivers/gpu/drm/i915/i915_active.h b/drivers/gpu/drm/i915/i915_active.h
index b3282ae7913c..cf4058150966 100644
--- a/drivers/gpu/drm/i915/i915_active.h
+++ b/drivers/gpu/drm/i915/i915_active.h
@@ -181,7 +181,11 @@ static inline bool i915_active_has_exclusive(struct i915_active *ref)
 	return rcu_access_pointer(ref->excl.fence);
 }
 
-int i915_active_wait(struct i915_active *ref);
+int __i915_active_wait(struct i915_active *ref, int state);
+static inline int i915_active_wait(struct i915_active *ref)
+{
+	return __i915_active_wait(ref, TASK_INTERRUPTIBLE);
+}
 
 int i915_sw_fence_await_active(struct i915_sw_fence *fence,
 			       struct i915_active *ref,
@@ -189,7 +193,9 @@ int i915_sw_fence_await_active(struct i915_sw_fence *fence,
 int i915_request_await_active(struct i915_request *rq,
 			      struct i915_active *ref,
 			      unsigned int flags);
-#define I915_ACTIVE_AWAIT_ALL BIT(0)
+#define I915_ACTIVE_AWAIT_EXCL BIT(0)
+#define I915_ACTIVE_AWAIT_ACTIVE BIT(1)
+#define I915_ACTIVE_AWAIT_BARRIER BIT(2)
 
 int i915_active_acquire(struct i915_active *ref);
 bool i915_active_acquire_if_busy(struct i915_active *ref);
@@ -221,4 +227,8 @@ void i915_request_add_active_barriers(struct i915_request *rq);
 void i915_active_print(struct i915_active *ref, struct drm_printer *m);
 void i915_active_unlock_wait(struct i915_active *ref);
 
+struct i915_active *i915_active_create(void);
+struct i915_active *i915_active_get(struct i915_active *ref);
+void i915_active_put(struct i915_active *ref);
+
 #endif /* _I915_ACTIVE_H_ */
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 6ca797128aa1..c09e1afb5f79 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -32,12 +32,12 @@
 #include <drm/drm_debugfs.h>
 
 #include "gem/i915_gem_context.h"
+#include "gt/intel_gt_clock_utils.h"
 #include "gt/intel_gt_pm.h"
 #include "gt/intel_gt_requests.h"
 #include "gt/intel_reset.h"
 #include "gt/intel_rc6.h"
 #include "gt/intel_rps.h"
-#include "gt/uc/intel_guc_submission.h"
 
 #include "i915_debugfs.h"
 #include "i915_debugfs_params.h"
@@ -218,7 +218,7 @@ i915_debugfs_describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 struct file_stats {
 	struct i915_address_space *vm;
 	unsigned long count;
-	u64 total, unbound;
+	u64 total;
 	u64 active, inactive;
 	u64 closed;
 };
@@ -234,8 +234,6 @@ static int per_file_stats(int id, void *ptr, void *data)
 
 	stats->count++;
 	stats->total += obj->base.size;
-	if (!atomic_read(&obj->bind_count))
-		stats->unbound += obj->base.size;
 
 	spin_lock(&obj->vma.lock);
 	if (!stats->vm) {
@@ -285,13 +283,12 @@ static int per_file_stats(int id, void *ptr, void *data)
 
 #define print_file_stats(m, name, stats) do { \
 	if (stats.count) \
-		seq_printf(m, "%s: %lu objects, %llu bytes (%llu active, %llu inactive, %llu unbound, %llu closed)\n", \
+		seq_printf(m, "%s: %lu objects, %llu bytes (%llu active, %llu inactive, %llu closed)\n", \
 			   name, \
 			   stats.count, \
 			   stats.total, \
 			   stats.active, \
 			   stats.inactive, \
-			   stats.unbound, \
 			   stats.closed); \
 } while (0)
 
@@ -745,7 +742,7 @@ i915_error_state_write(struct file *filp,
 	if (!error)
 		return 0;
 
-	DRM_DEBUG_DRIVER("Resetting error state\n");
+	drm_dbg(&error->i915->drm, "Resetting error state\n");
 	i915_reset_error_state(error->i915);
 
 	return cnt;
@@ -930,21 +927,30 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 		seq_printf(m, "RPDECLIMIT: 0x%08x\n", rpdeclimit);
 		seq_printf(m, "RPNSWREQ: %dMHz\n", reqf);
 		seq_printf(m, "CAGF: %dMHz\n", cagf);
-		seq_printf(m, "RP CUR UP EI: %d (%dus)\n",
-			   rpupei, GT_PM_INTERVAL_TO_US(dev_priv, rpupei));
-		seq_printf(m, "RP CUR UP: %d (%dus)\n",
-			   rpcurup, GT_PM_INTERVAL_TO_US(dev_priv, rpcurup));
-		seq_printf(m, "RP PREV UP: %d (%dus)\n",
-			   rpprevup, GT_PM_INTERVAL_TO_US(dev_priv, rpprevup));
+		seq_printf(m, "RP CUR UP EI: %d (%dns)\n",
+			   rpupei,
+			   intel_gt_pm_interval_to_ns(&dev_priv->gt, rpupei));
+		seq_printf(m, "RP CUR UP: %d (%dun)\n",
+			   rpcurup,
+			   intel_gt_pm_interval_to_ns(&dev_priv->gt, rpcurup));
+		seq_printf(m, "RP PREV UP: %d (%dns)\n",
+			   rpprevup,
+			   intel_gt_pm_interval_to_ns(&dev_priv->gt, rpprevup));
 		seq_printf(m, "Up threshold: %d%%\n",
 			   rps->power.up_threshold);
 
-		seq_printf(m, "RP CUR DOWN EI: %d (%dus)\n",
-			   rpdownei, GT_PM_INTERVAL_TO_US(dev_priv, rpdownei));
-		seq_printf(m, "RP CUR DOWN: %d (%dus)\n",
-			   rpcurdown, GT_PM_INTERVAL_TO_US(dev_priv, rpcurdown));
-		seq_printf(m, "RP PREV DOWN: %d (%dus)\n",
-			   rpprevdown, GT_PM_INTERVAL_TO_US(dev_priv, rpprevdown));
+		seq_printf(m, "RP CUR DOWN EI: %d (%dns)\n",
+			   rpdownei,
+			   intel_gt_pm_interval_to_ns(&dev_priv->gt,
+						      rpdownei));
+		seq_printf(m, "RP CUR DOWN: %d (%dns)\n",
+			   rpcurdown,
+			   intel_gt_pm_interval_to_ns(&dev_priv->gt,
+						      rpcurdown));
+		seq_printf(m, "RP PREV DOWN: %d (%dns)\n",
+			   rpprevdown,
+			   intel_gt_pm_interval_to_ns(&dev_priv->gt,
+						      rpprevdown));
 		seq_printf(m, "Down threshold: %d%%\n",
 			   rps->power.down_threshold);
 
@@ -1193,7 +1199,8 @@ static int i915_rps_boost_info(struct seq_file *m, void *data)
 	struct drm_i915_private *dev_priv = node_to_i915(m->private);
 	struct intel_rps *rps = &dev_priv->gt.rps;
 
-	seq_printf(m, "RPS enabled? %d\n", rps->enabled);
+	seq_printf(m, "RPS enabled? %s\n", yesno(intel_rps_is_enabled(rps)));
+	seq_printf(m, "RPS active? %s\n", yesno(intel_rps_is_active(rps)));
 	seq_printf(m, "GPU busy? %s\n", yesno(dev_priv->gt.awake));
 	seq_printf(m, "Boosts outstanding? %d\n",
 		   atomic_read(&rps->num_waiters));
@@ -1213,7 +1220,7 @@ static int i915_rps_boost_info(struct seq_file *m, void *data)
 
 	seq_printf(m, "Wait boosts: %d\n", atomic_read(&rps->boosts));
 
-	if (INTEL_GEN(dev_priv) >= 6 && rps->enabled && dev_priv->gt.awake) {
+	if (INTEL_GEN(dev_priv) >= 6 && intel_rps_is_active(rps)) {
 		u32 rpup, rpupei;
 		u32 rpdown, rpdownei;
 
@@ -1251,286 +1258,6 @@ static int i915_llc(struct seq_file *m, void *data)
 	return 0;
 }
 
-static int i915_huc_load_status_info(struct seq_file *m, void *data)
-{
-	struct drm_i915_private *dev_priv = node_to_i915(m->private);
-	intel_wakeref_t wakeref;
-	struct drm_printer p;
-
-	if (!HAS_GT_UC(dev_priv))
-		return -ENODEV;
-
-	p = drm_seq_file_printer(m);
-	intel_uc_fw_dump(&dev_priv->gt.uc.huc.fw, &p);
-
-	with_intel_runtime_pm(&dev_priv->runtime_pm, wakeref)
-		seq_printf(m, "\nHuC status 0x%08x:\n", I915_READ(HUC_STATUS2));
-
-	return 0;
-}
-
-static int i915_guc_load_status_info(struct seq_file *m, void *data)
-{
-	struct drm_i915_private *dev_priv = node_to_i915(m->private);
-	intel_wakeref_t wakeref;
-	struct drm_printer p;
-
-	if (!HAS_GT_UC(dev_priv))
-		return -ENODEV;
-
-	p = drm_seq_file_printer(m);
-	intel_uc_fw_dump(&dev_priv->gt.uc.guc.fw, &p);
-
-	with_intel_runtime_pm(&dev_priv->runtime_pm, wakeref) {
-		u32 tmp = I915_READ(GUC_STATUS);
-		u32 i;
-
-		seq_printf(m, "\nGuC status 0x%08x:\n", tmp);
-		seq_printf(m, "\tBootrom status = 0x%x\n",
-			   (tmp & GS_BOOTROM_MASK) >> GS_BOOTROM_SHIFT);
-		seq_printf(m, "\tuKernel status = 0x%x\n",
-			   (tmp & GS_UKERNEL_MASK) >> GS_UKERNEL_SHIFT);
-		seq_printf(m, "\tMIA Core status = 0x%x\n",
-			   (tmp & GS_MIA_MASK) >> GS_MIA_SHIFT);
-		seq_puts(m, "\nScratch registers:\n");
-		for (i = 0; i < 16; i++) {
-			seq_printf(m, "\t%2d: \t0x%x\n",
-				   i, I915_READ(SOFT_SCRATCH(i)));
-		}
-	}
-
-	return 0;
-}
-
-static const char *
-stringify_guc_log_type(enum guc_log_buffer_type type)
-{
-	switch (type) {
-	case GUC_ISR_LOG_BUFFER:
-		return "ISR";
-	case GUC_DPC_LOG_BUFFER:
-		return "DPC";
-	case GUC_CRASH_DUMP_LOG_BUFFER:
-		return "CRASH";
-	default:
-		MISSING_CASE(type);
-	}
-
-	return "";
-}
-
-static void i915_guc_log_info(struct seq_file *m, struct intel_guc_log *log)
-{
-	enum guc_log_buffer_type type;
-
-	if (!intel_guc_log_relay_created(log)) {
-		seq_puts(m, "GuC log relay not created\n");
-		return;
-	}
-
-	seq_puts(m, "GuC logging stats:\n");
-
-	seq_printf(m, "\tRelay full count: %u\n",
-		   log->relay.full_count);
-
-	for (type = GUC_ISR_LOG_BUFFER; type < GUC_MAX_LOG_BUFFER; type++) {
-		seq_printf(m, "\t%s:\tflush count %10u, overflow count %10u\n",
-			   stringify_guc_log_type(type),
-			   log->stats[type].flush,
-			   log->stats[type].sampled_overflow);
-	}
-}
-
-static int i915_guc_info(struct seq_file *m, void *data)
-{
-	struct drm_i915_private *dev_priv = node_to_i915(m->private);
-	struct intel_uc *uc = &dev_priv->gt.uc;
-
-	if (!intel_uc_uses_guc(uc))
-		return -ENODEV;
-
-	i915_guc_log_info(m, &uc->guc.log);
-
-	/* Add more as required ... */
-
-	return 0;
-}
-
-static int i915_guc_stage_pool(struct seq_file *m, void *data)
-{
-	struct drm_i915_private *dev_priv = node_to_i915(m->private);
-	struct intel_uc *uc = &dev_priv->gt.uc;
-	struct guc_stage_desc *desc = uc->guc.stage_desc_pool_vaddr;
-	int index;
-
-	if (!intel_uc_uses_guc_submission(uc))
-		return -ENODEV;
-
-	for (index = 0; index < GUC_MAX_STAGE_DESCRIPTORS; index++, desc++) {
-		struct intel_engine_cs *engine;
-
-		if (!(desc->attribute & GUC_STAGE_DESC_ATTR_ACTIVE))
-			continue;
-
-		seq_printf(m, "GuC stage descriptor %u:\n", index);
-		seq_printf(m, "\tIndex: %u\n", desc->stage_id);
-		seq_printf(m, "\tAttribute: 0x%x\n", desc->attribute);
-		seq_printf(m, "\tPriority: %d\n", desc->priority);
-		seq_printf(m, "\tDoorbell id: %d\n", desc->db_id);
-		seq_printf(m, "\tEngines used: 0x%x\n",
-			   desc->engines_used);
-		seq_printf(m, "\tDoorbell trigger phy: 0x%llx, cpu: 0x%llx, uK: 0x%x\n",
-			   desc->db_trigger_phy,
-			   desc->db_trigger_cpu,
-			   desc->db_trigger_uk);
-		seq_printf(m, "\tProcess descriptor: 0x%x\n",
-			   desc->process_desc);
-		seq_printf(m, "\tWorkqueue address: 0x%x, size: 0x%x\n",
-			   desc->wq_addr, desc->wq_size);
-		seq_putc(m, '\n');
-
-		for_each_uabi_engine(engine, dev_priv) {
-			u32 guc_engine_id = engine->guc_id;
-			struct guc_execlist_context *lrc =
-						&desc->lrc[guc_engine_id];
-
-			seq_printf(m, "\t%s LRC:\n", engine->name);
-			seq_printf(m, "\t\tContext desc: 0x%x\n",
-				   lrc->context_desc);
-			seq_printf(m, "\t\tContext id: 0x%x\n", lrc->context_id);
-			seq_printf(m, "\t\tLRCA: 0x%x\n", lrc->ring_lrca);
-			seq_printf(m, "\t\tRing begin: 0x%x\n", lrc->ring_begin);
-			seq_printf(m, "\t\tRing end: 0x%x\n", lrc->ring_end);
-			seq_putc(m, '\n');
-		}
-	}
-
-	return 0;
-}
-
-static int i915_guc_log_dump(struct seq_file *m, void *data)
-{
-	struct drm_info_node *node = m->private;
-	struct drm_i915_private *dev_priv = node_to_i915(node);
-	bool dump_load_err = !!node->info_ent->data;
-	struct drm_i915_gem_object *obj = NULL;
-	u32 *log;
-	int i = 0;
-
-	if (!HAS_GT_UC(dev_priv))
-		return -ENODEV;
-
-	if (dump_load_err)
-		obj = dev_priv->gt.uc.load_err_log;
-	else if (dev_priv->gt.uc.guc.log.vma)
-		obj = dev_priv->gt.uc.guc.log.vma->obj;
-
-	if (!obj)
-		return 0;
-
-	log = i915_gem_object_pin_map(obj, I915_MAP_WC);
-	if (IS_ERR(log)) {
-		DRM_DEBUG("Failed to pin object\n");
-		seq_puts(m, "(log data unaccessible)\n");
-		return PTR_ERR(log);
-	}
-
-	for (i = 0; i < obj->base.size / sizeof(u32); i += 4)
-		seq_printf(m, "0x%08x 0x%08x 0x%08x 0x%08x\n",
-			   *(log + i), *(log + i + 1),
-			   *(log + i + 2), *(log + i + 3));
-
-	seq_putc(m, '\n');
-
-	i915_gem_object_unpin_map(obj);
-
-	return 0;
-}
-
-static int i915_guc_log_level_get(void *data, u64 *val)
-{
-	struct drm_i915_private *dev_priv = data;
-	struct intel_uc *uc = &dev_priv->gt.uc;
-
-	if (!intel_uc_uses_guc(uc))
-		return -ENODEV;
-
-	*val = intel_guc_log_get_level(&uc->guc.log);
-
-	return 0;
-}
-
-static int i915_guc_log_level_set(void *data, u64 val)
-{
-	struct drm_i915_private *dev_priv = data;
-	struct intel_uc *uc = &dev_priv->gt.uc;
-
-	if (!intel_uc_uses_guc(uc))
-		return -ENODEV;
-
-	return intel_guc_log_set_level(&uc->guc.log, val);
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(i915_guc_log_level_fops,
-			i915_guc_log_level_get, i915_guc_log_level_set,
-			"%lld\n");
-
-static int i915_guc_log_relay_open(struct inode *inode, struct file *file)
-{
-	struct drm_i915_private *i915 = inode->i_private;
-	struct intel_guc *guc = &i915->gt.uc.guc;
-	struct intel_guc_log *log = &guc->log;
-
-	if (!intel_guc_is_ready(guc))
-		return -ENODEV;
-
-	file->private_data = log;
-
-	return intel_guc_log_relay_open(log);
-}
-
-static ssize_t
-i915_guc_log_relay_write(struct file *filp,
-			 const char __user *ubuf,
-			 size_t cnt,
-			 loff_t *ppos)
-{
-	struct intel_guc_log *log = filp->private_data;
-	int val;
-	int ret;
-
-	ret = kstrtoint_from_user(ubuf, cnt, 0, &val);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Enable and start the guc log relay on value of 1.
-	 * Flush log relay for any other value.
-	 */
-	if (val == 1)
-		ret = intel_guc_log_relay_start(log);
-	else
-		intel_guc_log_relay_flush(log);
-
-	return ret ?: cnt;
-}
-
-static int i915_guc_log_relay_release(struct inode *inode, struct file *file)
-{
-	struct drm_i915_private *i915 = inode->i_private;
-	struct intel_guc *guc = &i915->gt.uc.guc;
-
-	intel_guc_log_relay_close(&guc->log);
-	return 0;
-}
-
-static const struct file_operations i915_guc_log_relay_fops = {
-	.owner = THIS_MODULE,
-	.open = i915_guc_log_relay_open,
-	.write = i915_guc_log_relay_write,
-	.release = i915_guc_log_relay_release,
-};
-
 static int i915_runtime_pm_status(struct seq_file *m, void *unused)
 {
 	struct drm_i915_private *dev_priv = node_to_i915(m->private);
@@ -2139,12 +1866,6 @@ static const struct drm_info_list i915_debugfs_list[] = {
 	{"i915_gem_objects", i915_gem_object_info, 0},
 	{"i915_gem_fence_regs", i915_gem_fence_regs_info, 0},
 	{"i915_gem_interrupt", i915_interrupt_info, 0},
-	{"i915_guc_info", i915_guc_info, 0},
-	{"i915_guc_load_status", i915_guc_load_status_info, 0},
-	{"i915_guc_log_dump", i915_guc_log_dump, 0},
-	{"i915_guc_load_err_log_dump", i915_guc_log_dump, 0, (void *)1},
-	{"i915_guc_stage_pool", i915_guc_stage_pool, 0},
-	{"i915_huc_load_status", i915_huc_load_status_info, 0},
 	{"i915_frequency_info", i915_frequency_info, 0},
 	{"i915_ring_freq_table", i915_ring_freq_table, 0},
 	{"i915_context_status", i915_context_status, 0},
@@ -2172,11 +1893,9 @@ static const struct i915_debugfs_files {
 	{"i915_error_state", &i915_error_state_fops},
 	{"i915_gpu_info", &i915_gpu_info_fops},
 #endif
-	{"i915_guc_log_level", &i915_guc_log_level_fops},
-	{"i915_guc_log_relay", &i915_guc_log_relay_fops},
 };
 
-int i915_debugfs_register(struct drm_i915_private *dev_priv)
+void i915_debugfs_register(struct drm_i915_private *dev_priv)
 {
 	struct drm_minor *minor = dev_priv->drm.primary;
 	int i;
@@ -2193,7 +1912,7 @@ int i915_debugfs_register(struct drm_i915_private *dev_priv)
 				    i915_debugfs_files[i].fops);
 	}
 
-	return drm_debugfs_create_files(i915_debugfs_list,
-					I915_DEBUGFS_ENTRIES,
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(i915_debugfs_list,
+				 I915_DEBUGFS_ENTRIES,
+				 minor->debugfs_root, minor);
 }
diff --git a/drivers/gpu/drm/i915/i915_debugfs.h b/drivers/gpu/drm/i915/i915_debugfs.h
index 6da39c76ab5e..1de2736f1248 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.h
+++ b/drivers/gpu/drm/i915/i915_debugfs.h
@@ -12,10 +12,10 @@ struct drm_i915_private;
 struct seq_file;
 
 #ifdef CONFIG_DEBUG_FS
-int i915_debugfs_register(struct drm_i915_private *dev_priv);
+void i915_debugfs_register(struct drm_i915_private *dev_priv);
 void i915_debugfs_describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj);
 #else
-static inline int i915_debugfs_register(struct drm_i915_private *dev_priv) { return 0; }
+static inline void i915_debugfs_register(struct drm_i915_private *dev_priv) {}
 static inline void i915_debugfs_describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj) {}
 #endif
 
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 81a4621853db..34ee12f3f02d 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -43,6 +43,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_ioctl.h>
 #include <drm/drm_irq.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_probe_helper.h>
 
 #include "display/intel_acpi.h"
@@ -227,14 +228,14 @@ static int i915_driver_modeset_probe_noirq(struct drm_i915_private *i915)
 		ret = drm_vblank_init(&i915->drm,
 				      INTEL_NUM_PIPES(i915));
 		if (ret)
-			goto out;
+			return ret;
 	}
 
 	intel_bios_init(i915);
 
 	ret = intel_vga_register(i915);
 	if (ret)
-		goto out;
+		goto cleanup_bios;
 
 	intel_power_domains_init_hw(i915, false);
 
@@ -242,13 +243,16 @@ static int i915_driver_modeset_probe_noirq(struct drm_i915_private *i915)
 
 	ret = intel_modeset_init_noirq(i915);
 	if (ret)
-		goto cleanup_vga_client;
+		goto cleanup_vga_client_pw_domain_csr;
 
 	return 0;
 
-cleanup_vga_client:
+cleanup_vga_client_pw_domain_csr:
+	intel_csr_ucode_fini(i915);
+	intel_power_domains_driver_remove(i915);
 	intel_vga_unregister(i915);
-out:
+cleanup_bios:
+	intel_bios_driver_remove(i915);
 	return ret;
 }
 
@@ -307,13 +311,13 @@ static void i915_driver_modeset_remove(struct drm_i915_private *i915)
 /* part #2: call after irq uninstall */
 static void i915_driver_modeset_remove_noirq(struct drm_i915_private *i915)
 {
-	intel_modeset_driver_remove_noirq(i915);
+	intel_csr_ucode_fini(i915);
 
-	intel_bios_driver_remove(i915);
+	intel_power_domains_driver_remove(i915);
 
 	intel_vga_unregister(i915);
 
-	intel_csr_ucode_fini(i915);
+	intel_bios_driver_remove(i915);
 }
 
 static void intel_init_dpio(struct drm_i915_private *dev_priv)
@@ -565,6 +569,62 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
 	intel_gvt_sanitize_options(dev_priv);
 }
 
+/**
+ * i915_set_dma_info - set all relevant PCI dma info as configured for the
+ * platform
+ * @i915: valid i915 instance
+ *
+ * Set the dma max segment size, device and coherent masks.  The dma mask set
+ * needs to occur before i915_ggtt_probe_hw.
+ *
+ * A couple of platforms have special needs.  Address them as well.
+ *
+ */
+static int i915_set_dma_info(struct drm_i915_private *i915)
+{
+	struct pci_dev *pdev = i915->drm.pdev;
+	unsigned int mask_size = INTEL_INFO(i915)->dma_mask_size;
+	int ret;
+
+	GEM_BUG_ON(!mask_size);
+
+	/*
+	 * We don't have a max segment size, so set it to the max so sg's
+	 * debugging layer doesn't complain
+	 */
+	dma_set_max_seg_size(&pdev->dev, UINT_MAX);
+
+	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(mask_size));
+	if (ret)
+		goto mask_err;
+
+	/* overlay on gen2 is broken and can't address above 1G */
+	if (IS_GEN(i915, 2))
+		mask_size = 30;
+
+	/*
+	 * 965GM sometimes incorrectly writes to hardware status page (HWS)
+	 * using 32bit addressing, overwriting memory if HWS is located
+	 * above 4GB.
+	 *
+	 * The documentation also mentions an issue with undefined
+	 * behaviour if any general state is accessed within a page above 4GB,
+	 * which also needs to be handled carefully.
+	 */
+	if (IS_I965G(i915) || IS_I965GM(i915))
+		mask_size = 32;
+
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(mask_size));
+	if (ret)
+		goto mask_err;
+
+	return 0;
+
+mask_err:
+	drm_err(&i915->drm, "Can't set DMA mask/consistent mask (%d)\n", ret);
+	return ret;
+}
+
 /**
  * i915_driver_hw_probe - setup state requiring device access
  * @dev_priv: device private
@@ -610,6 +670,10 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv)
 	/* needs to be done before ggtt probe */
 	intel_dram_edram_detect(dev_priv);
 
+	ret = i915_set_dma_info(dev_priv);
+	if (ret)
+		return ret;
+
 	i915_perf_init(dev_priv);
 
 	ret = i915_ggtt_probe_hw(dev_priv);
@@ -638,40 +702,6 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv)
 
 	pci_set_master(pdev);
 
-	/*
-	 * We don't have a max segment size, so set it to the max so sg's
-	 * debugging layer doesn't complain
-	 */
-	dma_set_max_seg_size(&pdev->dev, UINT_MAX);
-
-	/* overlay on gen2 is broken and can't address above 1G */
-	if (IS_GEN(dev_priv, 2)) {
-		ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(30));
-		if (ret) {
-			drm_err(&dev_priv->drm, "failed to set DMA mask\n");
-
-			goto err_mem_regions;
-		}
-	}
-
-	/* 965GM sometimes incorrectly writes to hardware status page (HWS)
-	 * using 32bit addressing, overwriting memory if HWS is located
-	 * above 4GB.
-	 *
-	 * The documentation also mentions an issue with undefined
-	 * behaviour if any general state is accessed within a page above 4GB,
-	 * which also needs to be handled carefully.
-	 */
-	if (IS_I965G(dev_priv) || IS_I965GM(dev_priv)) {
-		ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-
-		if (ret) {
-			drm_err(&dev_priv->drm, "failed to set DMA mask\n");
-
-			goto err_mem_regions;
-		}
-	}
-
 	cpu_latency_qos_add_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
 
 	intel_gt_init_workarounds(dev_priv);
@@ -876,17 +906,11 @@ i915_driver_create(struct pci_dev *pdev, const struct pci_device_id *ent)
 		(struct intel_device_info *)ent->driver_data;
 	struct intel_device_info *device_info;
 	struct drm_i915_private *i915;
-	int err;
-
-	i915 = kzalloc(sizeof(*i915), GFP_KERNEL);
-	if (!i915)
-		return ERR_PTR(-ENOMEM);
 
-	err = drm_dev_init(&i915->drm, &driver, &pdev->dev);
-	if (err) {
-		kfree(i915);
-		return ERR_PTR(err);
-	}
+	i915 = devm_drm_dev_alloc(&pdev->dev, &driver,
+				  struct drm_i915_private, drm);
+	if (IS_ERR(i915))
+		return i915;
 
 	i915->drm.pdev = pdev;
 	pci_set_drvdata(pdev, i915);
@@ -901,17 +925,6 @@ i915_driver_create(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return i915;
 }
 
-static void i915_driver_destroy(struct drm_i915_private *i915)
-{
-	struct pci_dev *pdev = i915->drm.pdev;
-
-	drm_dev_fini(&i915->drm);
-	kfree(i915);
-
-	/* And make sure we never chase our dangling pointer from pci_dev */
-	pci_set_drvdata(pdev, NULL);
-}
-
 /**
  * i915_driver_probe - setup chip and create an initial config
  * @pdev: PCI device
@@ -993,12 +1006,14 @@ int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	i915_welcome_messages(i915);
 
+	i915->do_release = true;
+
 	return 0;
 
 out_cleanup_irq:
 	intel_irq_uninstall(i915);
 out_cleanup_modeset:
-	/* FIXME */
+	i915_driver_modeset_remove_noirq(i915);
 out_cleanup_hw:
 	i915_driver_hw_remove(i915);
 	intel_memory_regions_driver_release(i915);
@@ -1012,7 +1027,6 @@ int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pci_disable_device(pdev);
 out_fini:
 	i915_probe_error(i915, "Device initialization failed (%d)\n", ret);
-	i915_driver_destroy(i915);
 	return ret;
 }
 
@@ -1035,12 +1049,12 @@ void i915_driver_remove(struct drm_i915_private *i915)
 
 	intel_irq_uninstall(i915);
 
-	i915_driver_modeset_remove_noirq(i915);
+	intel_modeset_driver_remove_noirq(i915);
 
 	i915_reset_error_state(i915);
 	i915_gem_driver_remove(i915);
 
-	intel_power_domains_driver_remove(i915);
+	i915_driver_modeset_remove_noirq(i915);
 
 	i915_driver_hw_remove(i915);
 
@@ -1052,6 +1066,9 @@ static void i915_driver_release(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct intel_runtime_pm *rpm = &dev_priv->runtime_pm;
 
+	if (!dev_priv->do_release)
+		return;
+
 	disable_rpm_wakeref_asserts(rpm);
 
 	i915_gem_driver_release(dev_priv);
@@ -1065,7 +1082,6 @@ static void i915_driver_release(struct drm_device *dev)
 	intel_runtime_pm_driver_release(rpm);
 
 	i915_driver_late_release(dev_priv);
-	i915_driver_destroy(dev_priv);
 }
 
 static int i915_driver_open(struct drm_device *dev, struct drm_file *file)
@@ -1286,7 +1302,6 @@ static int i915_drm_resume(struct drm_device *dev)
 		drm_err(&dev_priv->drm, "failed to re-enable GGTT\n");
 
 	i915_ggtt_resume(&dev_priv->ggtt);
-	i915_gem_restore_fences(&dev_priv->ggtt);
 
 	intel_csr_ucode_resume(dev_priv);
 
@@ -1604,8 +1619,6 @@ static int intel_runtime_suspend(struct device *kdev)
 
 		intel_gt_runtime_resume(&dev_priv->gt);
 
-		i915_gem_restore_fences(&dev_priv->ggtt);
-
 		enable_rpm_wakeref_asserts(rpm);
 
 		return ret;
@@ -1685,7 +1698,6 @@ static int intel_runtime_resume(struct device *kdev)
 	 * we can do is to hope that things will still work (and disable RPM).
 	 */
 	intel_gt_runtime_resume(&dev_priv->gt);
-	i915_gem_restore_fences(&dev_priv->ggtt);
 
 	/*
 	 * On VLV/CHV display interrupts are part of the display
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 62b901ffabf9..b00f0845cbc3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -92,7 +92,6 @@
 #include "intel_wopcm.h"
 
 #include "i915_gem.h"
-#include "i915_gem_fence_reg.h"
 #include "i915_gem_gtt.h"
 #include "i915_gpu_error.h"
 #include "i915_perf_types.h"
@@ -109,8 +108,8 @@
 
 #define DRIVER_NAME		"i915"
 #define DRIVER_DESC		"Intel Graphics"
-#define DRIVER_DATE		"20200313"
-#define DRIVER_TIMESTAMP	1584144591
+#define DRIVER_DATE		"20200417"
+#define DRIVER_TIMESTAMP	1587105300
 
 struct drm_i915_gem_object;
 
@@ -417,6 +416,7 @@ struct intel_fbc {
 		struct {
 			const struct drm_format_info *format;
 			unsigned int stride;
+			u64 modifier;
 		} fb;
 		u16 gen9_wa_cfb_stride;
 		s8 fence_id;
@@ -540,7 +540,6 @@ struct i915_suspend_saved_registers {
 	u32 saveSWF0[16];
 	u32 saveSWF1[16];
 	u32 saveSWF3[3];
-	u64 saveFENCE[I915_MAX_NUM_FENCES];
 	u32 savePCH_PORT_HOTPLUG;
 	u16 saveGCDGMBUS;
 };
@@ -823,6 +822,9 @@ struct i915_selftest_stash {
 struct drm_i915_private {
 	struct drm_device drm;
 
+	/* FIXME: Device release actions should all be moved to drmm_ */
+	bool do_release;
+
 	const struct intel_device_info __info; /* Use INTEL_INFO() to access. */
 	struct intel_runtime_info __runtime; /* Use RUNTIME_INFO() to access. */
 	struct intel_driver_caps caps;
@@ -885,7 +887,6 @@ struct drm_i915_private {
 
 	struct pci_dev *bridge_dev;
 
-	struct intel_engine_cs *engine[I915_NUM_ENGINES];
 	struct rb_root uabi_engines;
 
 	struct resource mch_res;
@@ -1606,7 +1607,7 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define HAS_DDI(dev_priv)		 (INTEL_INFO(dev_priv)->display.has_ddi)
 #define HAS_FPGA_DBG_UNCLAIMED(dev_priv) (INTEL_INFO(dev_priv)->has_fpga_dbg)
 #define HAS_PSR(dev_priv)		 (INTEL_INFO(dev_priv)->display.has_psr)
-#define HAS_TRANSCODER_EDP(dev_priv)	 (INTEL_INFO(dev_priv)->trans_offsets[TRANSCODER_EDP] != 0)
+#define HAS_TRANSCODER(dev_priv, trans)	 ((INTEL_INFO(dev_priv)->cpu_transcoder_mask & BIT(trans)) != 0)
 
 #define HAS_RC6(dev_priv)		 (INTEL_INFO(dev_priv)->has_rc6)
 #define HAS_RC6p(dev_priv)		 (INTEL_INFO(dev_priv)->has_rc6p)
@@ -1740,6 +1741,7 @@ int i915_gem_object_unbind(struct drm_i915_gem_object *obj,
 			   unsigned long flags);
 #define I915_GEM_OBJECT_UNBIND_ACTIVE BIT(0)
 #define I915_GEM_OBJECT_UNBIND_BARRIER BIT(1)
+#define I915_GEM_OBJECT_UNBIND_TEST BIT(2)
 
 void i915_gem_runtime_suspend(struct drm_i915_private *dev_priv);
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ca5420012a22..0cbcb9f54e7d 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -118,7 +118,7 @@ int i915_gem_object_unbind(struct drm_i915_gem_object *obj,
 	struct i915_vma *vma;
 	int ret;
 
-	if (!atomic_read(&obj->bind_count))
+	if (list_empty(&obj->vma.list))
 		return 0;
 
 	/*
@@ -141,6 +141,11 @@ int i915_gem_object_unbind(struct drm_i915_gem_object *obj,
 		if (!i915_vma_is_bound(vma, I915_VMA_BIND_MASK))
 			continue;
 
+		if (flags & I915_GEM_OBJECT_UNBIND_TEST) {
+			ret = -EBUSY;
+			break;
+		}
+
 		ret = -EAGAIN;
 		if (!i915_vm_tryopen(vm))
 			break;
@@ -993,18 +998,16 @@ i915_gem_object_ggtt_pin(struct drm_i915_gem_object *obj,
 			return ERR_PTR(ret);
 	}
 
+	ret = i915_vma_pin(vma, size, alignment, flags | PIN_GLOBAL);
+	if (ret)
+		return ERR_PTR(ret);
+
 	if (vma->fence && !i915_gem_object_is_tiled(obj)) {
 		mutex_lock(&ggtt->vm.mutex);
-		ret = i915_vma_revoke_fence(vma);
+		i915_vma_revoke_fence(vma);
 		mutex_unlock(&ggtt->vm.mutex);
-		if (ret)
-			return ERR_PTR(ret);
 	}
 
-	ret = i915_vma_pin(vma, size, alignment, flags | PIN_GLOBAL);
-	if (ret)
-		return ERR_PTR(ret);
-
 	ret = i915_vma_wait_for_bind(vma);
 	if (ret) {
 		i915_vma_unpin(vma);
@@ -1156,7 +1159,6 @@ int i915_gem_init(struct drm_i915_private *dev_priv)
 		/* Minimal basic recovery for KMS */
 		ret = i915_ggtt_enable_hw(dev_priv);
 		i915_ggtt_resume(&dev_priv->ggtt);
-		i915_gem_restore_fences(&dev_priv->ggtt);
 		intel_init_clock_gating(dev_priv);
 	}
 
diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
index 4518b9b35c3d..0ba7b1e881c0 100644
--- a/drivers/gpu/drm/i915/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@@ -228,7 +228,12 @@ i915_gem_evict_something(struct i915_address_space *vm,
 
 	while (ret == 0 && (node = drm_mm_scan_color_evict(&scan))) {
 		vma = container_of(node, struct i915_vma, node);
-		ret = __i915_vma_unbind(vma);
+
+		/* If we find any non-objects (!vma), we cannot evict them */
+		if (vma->node.color != I915_COLOR_UNEVICTABLE)
+			ret = __i915_vma_unbind(vma);
+		else
+			ret = -ENOSPC; /* XXX search failed, try again? */
 	}
 
 	return ret;
diff --git a/drivers/gpu/drm/i915/i915_gem_fence_reg.c b/drivers/gpu/drm/i915/i915_gem_fence_reg.c
deleted file mode 100644
index d152b648c73c..000000000000
--- a/drivers/gpu/drm/i915/i915_gem_fence_reg.c
+++ /dev/null
@@ -1,911 +0,0 @@
-/*
- * Copyright © 2008-2015 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
- * IN THE SOFTWARE.
- */
-
-#include "i915_drv.h"
-#include "i915_scatterlist.h"
-#include "i915_pvinfo.h"
-#include "i915_vgpu.h"
-
-/**
- * DOC: fence register handling
- *
- * Important to avoid confusions: "fences" in the i915 driver are not execution
- * fences used to track command completion but hardware detiler objects which
- * wrap a given range of the global GTT. Each platform has only a fairly limited
- * set of these objects.
- *
- * Fences are used to detile GTT memory mappings. They're also connected to the
- * hardware frontbuffer render tracking and hence interact with frontbuffer
- * compression. Furthermore on older platforms fences are required for tiled
- * objects used by the display engine. They can also be used by the render
- * engine - they're required for blitter commands and are optional for render
- * commands. But on gen4+ both display (with the exception of fbc) and rendering
- * have their own tiling state bits and don't need fences.
- *
- * Also note that fences only support X and Y tiling and hence can't be used for
- * the fancier new tiling formats like W, Ys and Yf.
- *
- * Finally note that because fences are such a restricted resource they're
- * dynamically associated with objects. Furthermore fence state is committed to
- * the hardware lazily to avoid unnecessary stalls on gen2/3. Therefore code must
- * explicitly call i915_gem_object_get_fence() to synchronize fencing status
- * for cpu access. Also note that some code wants an unfenced view, for those
- * cases the fence can be removed forcefully with i915_gem_object_put_fence().
- *
- * Internally these functions will synchronize with userspace access by removing
- * CPU ptes into GTT mmaps (not the GTT ptes themselves) as needed.
- */
-
-#define pipelined 0
-
-static struct drm_i915_private *fence_to_i915(struct i915_fence_reg *fence)
-{
-	return fence->ggtt->vm.i915;
-}
-
-static struct intel_uncore *fence_to_uncore(struct i915_fence_reg *fence)
-{
-	return fence->ggtt->vm.gt->uncore;
-}
-
-static void i965_write_fence_reg(struct i915_fence_reg *fence,
-				 struct i915_vma *vma)
-{
-	i915_reg_t fence_reg_lo, fence_reg_hi;
-	int fence_pitch_shift;
-	u64 val;
-
-	if (INTEL_GEN(fence_to_i915(fence)) >= 6) {
-		fence_reg_lo = FENCE_REG_GEN6_LO(fence->id);
-		fence_reg_hi = FENCE_REG_GEN6_HI(fence->id);
-		fence_pitch_shift = GEN6_FENCE_PITCH_SHIFT;
-
-	} else {
-		fence_reg_lo = FENCE_REG_965_LO(fence->id);
-		fence_reg_hi = FENCE_REG_965_HI(fence->id);
-		fence_pitch_shift = I965_FENCE_PITCH_SHIFT;
-	}
-
-	val = 0;
-	if (vma) {
-		unsigned int stride = i915_gem_object_get_stride(vma->obj);
-
-		GEM_BUG_ON(!i915_vma_is_map_and_fenceable(vma));
-		GEM_BUG_ON(!IS_ALIGNED(vma->node.start, I965_FENCE_PAGE));
-		GEM_BUG_ON(!IS_ALIGNED(vma->fence_size, I965_FENCE_PAGE));
-		GEM_BUG_ON(!IS_ALIGNED(stride, 128));
-
-		val = (vma->node.start + vma->fence_size - I965_FENCE_PAGE) << 32;
-		val |= vma->node.start;
-		val |= (u64)((stride / 128) - 1) << fence_pitch_shift;
-		if (i915_gem_object_get_tiling(vma->obj) == I915_TILING_Y)
-			val |= BIT(I965_FENCE_TILING_Y_SHIFT);
-		val |= I965_FENCE_REG_VALID;
-	}
-
-	if (!pipelined) {
-		struct intel_uncore *uncore = fence_to_uncore(fence);
-
-		/*
-		 * To w/a incoherency with non-atomic 64-bit register updates,
-		 * we split the 64-bit update into two 32-bit writes. In order
-		 * for a partial fence not to be evaluated between writes, we
-		 * precede the update with write to turn off the fence register,
-		 * and only enable the fence as the last step.
-		 *
-		 * For extra levels of paranoia, we make sure each step lands
-		 * before applying the next step.
-		 */
-		intel_uncore_write_fw(uncore, fence_reg_lo, 0);
-		intel_uncore_posting_read_fw(uncore, fence_reg_lo);
-
-		intel_uncore_write_fw(uncore, fence_reg_hi, upper_32_bits(val));
-		intel_uncore_write_fw(uncore, fence_reg_lo, lower_32_bits(val));
-		intel_uncore_posting_read_fw(uncore, fence_reg_lo);
-	}
-}
-
-static void i915_write_fence_reg(struct i915_fence_reg *fence,
-				 struct i915_vma *vma)
-{
-	u32 val;
-
-	val = 0;
-	if (vma) {
-		unsigned int tiling = i915_gem_object_get_tiling(vma->obj);
-		bool is_y_tiled = tiling == I915_TILING_Y;
-		unsigned int stride = i915_gem_object_get_stride(vma->obj);
-
-		GEM_BUG_ON(!i915_vma_is_map_and_fenceable(vma));
-		GEM_BUG_ON(vma->node.start & ~I915_FENCE_START_MASK);
-		GEM_BUG_ON(!is_power_of_2(vma->fence_size));
-		GEM_BUG_ON(!IS_ALIGNED(vma->node.start, vma->fence_size));
-
-		if (is_y_tiled && HAS_128_BYTE_Y_TILING(fence_to_i915(fence)))
-			stride /= 128;
-		else
-			stride /= 512;
-		GEM_BUG_ON(!is_power_of_2(stride));
-
-		val = vma->node.start;
-		if (is_y_tiled)
-			val |= BIT(I830_FENCE_TILING_Y_SHIFT);
-		val |= I915_FENCE_SIZE_BITS(vma->fence_size);
-		val |= ilog2(stride) << I830_FENCE_PITCH_SHIFT;
-
-		val |= I830_FENCE_REG_VALID;
-	}
-
-	if (!pipelined) {
-		struct intel_uncore *uncore = fence_to_uncore(fence);
-		i915_reg_t reg = FENCE_REG(fence->id);
-
-		intel_uncore_write_fw(uncore, reg, val);
-		intel_uncore_posting_read_fw(uncore, reg);
-	}
-}
-
-static void i830_write_fence_reg(struct i915_fence_reg *fence,
-				 struct i915_vma *vma)
-{
-	u32 val;
-
-	val = 0;
-	if (vma) {
-		unsigned int stride = i915_gem_object_get_stride(vma->obj);
-
-		GEM_BUG_ON(!i915_vma_is_map_and_fenceable(vma));
-		GEM_BUG_ON(vma->node.start & ~I830_FENCE_START_MASK);
-		GEM_BUG_ON(!is_power_of_2(vma->fence_size));
-		GEM_BUG_ON(!is_power_of_2(stride / 128));
-		GEM_BUG_ON(!IS_ALIGNED(vma->node.start, vma->fence_size));
-
-		val = vma->node.start;
-		if (i915_gem_object_get_tiling(vma->obj) == I915_TILING_Y)
-			val |= BIT(I830_FENCE_TILING_Y_SHIFT);
-		val |= I830_FENCE_SIZE_BITS(vma->fence_size);
-		val |= ilog2(stride / 128) << I830_FENCE_PITCH_SHIFT;
-		val |= I830_FENCE_REG_VALID;
-	}
-
-	if (!pipelined) {
-		struct intel_uncore *uncore = fence_to_uncore(fence);
-		i915_reg_t reg = FENCE_REG(fence->id);
-
-		intel_uncore_write_fw(uncore, reg, val);
-		intel_uncore_posting_read_fw(uncore, reg);
-	}
-}
-
-static void fence_write(struct i915_fence_reg *fence,
-			struct i915_vma *vma)
-{
-	struct drm_i915_private *i915 = fence_to_i915(fence);
-
-	/*
-	 * Previous access through the fence register is marshalled by
-	 * the mb() inside the fault handlers (i915_gem_release_mmaps)
-	 * and explicitly managed for internal users.
-	 */
-
-	if (IS_GEN(i915, 2))
-		i830_write_fence_reg(fence, vma);
-	else if (IS_GEN(i915, 3))
-		i915_write_fence_reg(fence, vma);
-	else
-		i965_write_fence_reg(fence, vma);
-
-	/*
-	 * Access through the fenced region afterwards is
-	 * ordered by the posting reads whilst writing the registers.
-	 */
-
-	fence->dirty = false;
-}
-
-static int fence_update(struct i915_fence_reg *fence,
-			struct i915_vma *vma)
-{
-	struct i915_ggtt *ggtt = fence->ggtt;
-	struct intel_uncore *uncore = fence_to_uncore(fence);
-	intel_wakeref_t wakeref;
-	struct i915_vma *old;
-	int ret;
-
-	if (vma) {
-		if (!i915_vma_is_map_and_fenceable(vma))
-			return -EINVAL;
-
-		if (drm_WARN(&uncore->i915->drm,
-			     !i915_gem_object_get_stride(vma->obj) ||
-			     !i915_gem_object_get_tiling(vma->obj),
-			     "bogus fence setup with stride: 0x%x, tiling mode: %i\n",
-			     i915_gem_object_get_stride(vma->obj),
-			     i915_gem_object_get_tiling(vma->obj)))
-			return -EINVAL;
-
-		ret = i915_vma_sync(vma);
-		if (ret)
-			return ret;
-	}
-
-	old = xchg(&fence->vma, NULL);
-	if (old) {
-		/* XXX Ideally we would move the waiting to outside the mutex */
-		ret = i915_vma_sync(old);
-		if (ret) {
-			fence->vma = old;
-			return ret;
-		}
-
-		i915_vma_flush_writes(old);
-
-		/*
-		 * Ensure that all userspace CPU access is completed before
-		 * stealing the fence.
-		 */
-		if (old != vma) {
-			GEM_BUG_ON(old->fence != fence);
-			i915_vma_revoke_mmap(old);
-			old->fence = NULL;
-		}
-
-		list_move(&fence->link, &ggtt->fence_list);
-	}
-
-	/*
-	 * We only need to update the register itself if the device is awake.
-	 * If the device is currently powered down, we will defer the write
-	 * to the runtime resume, see i915_gem_restore_fences().
-	 *
-	 * This only works for removing the fence register, on acquisition
-	 * the caller must hold the rpm wakeref. The fence register must
-	 * be cleared before we can use any other fences to ensure that
-	 * the new fences do not overlap the elided clears, confusing HW.
-	 */
-	wakeref = intel_runtime_pm_get_if_in_use(uncore->rpm);
-	if (!wakeref) {
-		GEM_BUG_ON(vma);
-		return 0;
-	}
-
-	WRITE_ONCE(fence->vma, vma);
-	fence_write(fence, vma);
-
-	if (vma) {
-		vma->fence = fence;
-		list_move_tail(&fence->link, &ggtt->fence_list);
-	}
-
-	intel_runtime_pm_put(uncore->rpm, wakeref);
-	return 0;
-}
-
-/**
- * i915_vma_revoke_fence - force-remove fence for a VMA
- * @vma: vma to map linearly (not through a fence reg)
- *
- * This function force-removes any fence from the given object, which is useful
- * if the kernel wants to do untiled GTT access.
- *
- * Returns:
- *
- * 0 on success, negative error code on failure.
- */
-int i915_vma_revoke_fence(struct i915_vma *vma)
-{
-	struct i915_fence_reg *fence = vma->fence;
-
-	lockdep_assert_held(&vma->vm->mutex);
-	if (!fence)
-		return 0;
-
-	if (atomic_read(&fence->pin_count))
-		return -EBUSY;
-
-	return fence_update(fence, NULL);
-}
-
-static struct i915_fence_reg *fence_find(struct i915_ggtt *ggtt)
-{
-	struct i915_fence_reg *fence;
-
-	list_for_each_entry(fence, &ggtt->fence_list, link) {
-		GEM_BUG_ON(fence->vma && fence->vma->fence != fence);
-
-		if (atomic_read(&fence->pin_count))
-			continue;
-
-		return fence;
-	}
-
-	/* Wait for completion of pending flips which consume fences */
-	if (intel_has_pending_fb_unpin(ggtt->vm.i915))
-		return ERR_PTR(-EAGAIN);
-
-	return ERR_PTR(-EDEADLK);
-}
-
-int __i915_vma_pin_fence(struct i915_vma *vma)
-{
-	struct i915_ggtt *ggtt = i915_vm_to_ggtt(vma->vm);
-	struct i915_fence_reg *fence;
-	struct i915_vma *set = i915_gem_object_is_tiled(vma->obj) ? vma : NULL;
-	int err;
-
-	lockdep_assert_held(&vma->vm->mutex);
-
-	/* Just update our place in the LRU if our fence is getting reused. */
-	if (vma->fence) {
-		fence = vma->fence;
-		GEM_BUG_ON(fence->vma != vma);
-		atomic_inc(&fence->pin_count);
-		if (!fence->dirty) {
-			list_move_tail(&fence->link, &ggtt->fence_list);
-			return 0;
-		}
-	} else if (set) {
-		fence = fence_find(ggtt);
-		if (IS_ERR(fence))
-			return PTR_ERR(fence);
-
-		GEM_BUG_ON(atomic_read(&fence->pin_count));
-		atomic_inc(&fence->pin_count);
-	} else {
-		return 0;
-	}
-
-	err = fence_update(fence, set);
-	if (err)
-		goto out_unpin;
-
-	GEM_BUG_ON(fence->vma != set);
-	GEM_BUG_ON(vma->fence != (set ? fence : NULL));
-
-	if (set)
-		return 0;
-
-out_unpin:
-	atomic_dec(&fence->pin_count);
-	return err;
-}
-
-/**
- * i915_vma_pin_fence - set up fencing for a vma
- * @vma: vma to map through a fence reg
- *
- * When mapping objects through the GTT, userspace wants to be able to write
- * to them without having to worry about swizzling if the object is tiled.
- * This function walks the fence regs looking for a free one for @obj,
- * stealing one if it can't find any.
- *
- * It then sets up the reg based on the object's properties: address, pitch
- * and tiling format.
- *
- * For an untiled surface, this removes any existing fence.
- *
- * Returns:
- *
- * 0 on success, negative error code on failure.
- */
-int i915_vma_pin_fence(struct i915_vma *vma)
-{
-	int err;
-
-	if (!vma->fence && !i915_gem_object_is_tiled(vma->obj))
-		return 0;
-
-	/*
-	 * Note that we revoke fences on runtime suspend. Therefore the user
-	 * must keep the device awake whilst using the fence.
-	 */
-	assert_rpm_wakelock_held(vma->vm->gt->uncore->rpm);
-	GEM_BUG_ON(!i915_vma_is_pinned(vma));
-	GEM_BUG_ON(!i915_vma_is_ggtt(vma));
-
-	err = mutex_lock_interruptible(&vma->vm->mutex);
-	if (err)
-		return err;
-
-	err = __i915_vma_pin_fence(vma);
-	mutex_unlock(&vma->vm->mutex);
-
-	return err;
-}
-
-/**
- * i915_reserve_fence - Reserve a fence for vGPU
- * @ggtt: Global GTT
- *
- * This function walks the fence regs looking for a free one and remove
- * it from the fence_list. It is used to reserve fence for vGPU to use.
- */
-struct i915_fence_reg *i915_reserve_fence(struct i915_ggtt *ggtt)
-{
-	struct i915_fence_reg *fence;
-	int count;
-	int ret;
-
-	lockdep_assert_held(&ggtt->vm.mutex);
-
-	/* Keep at least one fence available for the display engine. */
-	count = 0;
-	list_for_each_entry(fence, &ggtt->fence_list, link)
-		count += !atomic_read(&fence->pin_count);
-	if (count <= 1)
-		return ERR_PTR(-ENOSPC);
-
-	fence = fence_find(ggtt);
-	if (IS_ERR(fence))
-		return fence;
-
-	if (fence->vma) {
-		/* Force-remove fence from VMA */
-		ret = fence_update(fence, NULL);
-		if (ret)
-			return ERR_PTR(ret);
-	}
-
-	list_del(&fence->link);
-
-	return fence;
-}
-
-/**
- * i915_unreserve_fence - Reclaim a reserved fence
- * @fence: the fence reg
- *
- * This function add a reserved fence register from vGPU to the fence_list.
- */
-void i915_unreserve_fence(struct i915_fence_reg *fence)
-{
-	struct i915_ggtt *ggtt = fence->ggtt;
-
-	lockdep_assert_held(&ggtt->vm.mutex);
-
-	list_add(&fence->link, &ggtt->fence_list);
-}
-
-/**
- * i915_gem_restore_fences - restore fence state
- * @ggtt: Global GTT
- *
- * Restore the hw fence state to match the software tracking again, to be called
- * after a gpu reset and on resume. Note that on runtime suspend we only cancel
- * the fences, to be reacquired by the user later.
- */
-void i915_gem_restore_fences(struct i915_ggtt *ggtt)
-{
-	int i;
-
-	rcu_read_lock(); /* keep obj alive as we dereference */
-	for (i = 0; i < ggtt->num_fences; i++) {
-		struct i915_fence_reg *reg = &ggtt->fence_regs[i];
-		struct i915_vma *vma = READ_ONCE(reg->vma);
-
-		GEM_BUG_ON(vma && vma->fence != reg);
-
-		/*
-		 * Commit delayed tiling changes if we have an object still
-		 * attached to the fence, otherwise just clear the fence.
-		 */
-		if (vma && !i915_gem_object_is_tiled(vma->obj))
-			vma = NULL;
-
-		fence_write(reg, vma);
-	}
-	rcu_read_unlock();
-}
-
-/**
- * DOC: tiling swizzling details
- *
- * The idea behind tiling is to increase cache hit rates by rearranging
- * pixel data so that a group of pixel accesses are in the same cacheline.
- * Performance improvement from doing this on the back/depth buffer are on
- * the order of 30%.
- *
- * Intel architectures make this somewhat more complicated, though, by
- * adjustments made to addressing of data when the memory is in interleaved
- * mode (matched pairs of DIMMS) to improve memory bandwidth.
- * For interleaved memory, the CPU sends every sequential 64 bytes
- * to an alternate memory channel so it can get the bandwidth from both.
- *
- * The GPU also rearranges its accesses for increased bandwidth to interleaved
- * memory, and it matches what the CPU does for non-tiled.  However, when tiled
- * it does it a little differently, since one walks addresses not just in the
- * X direction but also Y.  So, along with alternating channels when bit
- * 6 of the address flips, it also alternates when other bits flip --  Bits 9
- * (every 512 bytes, an X tile scanline) and 10 (every two X tile scanlines)
- * are common to both the 915 and 965-class hardware.
- *
- * The CPU also sometimes XORs in higher bits as well, to improve
- * bandwidth doing strided access like we do so frequently in graphics.  This
- * is called "Channel XOR Randomization" in the MCH documentation.  The result
- * is that the CPU is XORing in either bit 11 or bit 17 to bit 6 of its address
- * decode.
- *
- * All of this bit 6 XORing has an effect on our memory management,
- * as we need to make sure that the 3d driver can correctly address object
- * contents.
- *
- * If we don't have interleaved memory, all tiling is safe and no swizzling is
- * required.
- *
- * When bit 17 is XORed in, we simply refuse to tile at all.  Bit
- * 17 is not just a page offset, so as we page an object out and back in,
- * individual pages in it will have different bit 17 addresses, resulting in
- * each 64 bytes being swapped with its neighbor!
- *
- * Otherwise, if interleaved, we have to tell the 3d driver what the address
- * swizzling it needs to do is, since it's writing with the CPU to the pages
- * (bit 6 and potentially bit 11 XORed in), and the GPU is reading from the
- * pages (bit 6, 9, and 10 XORed in), resulting in a cumulative bit swizzling
- * required by the CPU of XORing in bit 6, 9, 10, and potentially 11, in order
- * to match what the GPU expects.
- */
-
-/**
- * detect_bit_6_swizzle - detect bit 6 swizzling pattern
- * @ggtt: Global GGTT
- *
- * Detects bit 6 swizzling of address lookup between IGD access and CPU
- * access through main memory.
- */
-static void detect_bit_6_swizzle(struct i915_ggtt *ggtt)
-{
-	struct intel_uncore *uncore = ggtt->vm.gt->uncore;
-	struct drm_i915_private *i915 = ggtt->vm.i915;
-	u32 swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
-	u32 swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
-
-	if (INTEL_GEN(i915) >= 8 || IS_VALLEYVIEW(i915)) {
-		/*
-		 * On BDW+, swizzling is not used. We leave the CPU memory
-		 * controller in charge of optimizing memory accesses without
-		 * the extra address manipulation GPU side.
-		 *
-		 * VLV and CHV don't have GPU swizzling.
-		 */
-		swizzle_x = I915_BIT_6_SWIZZLE_NONE;
-		swizzle_y = I915_BIT_6_SWIZZLE_NONE;
-	} else if (INTEL_GEN(i915) >= 6) {
-		if (i915->preserve_bios_swizzle) {
-			if (intel_uncore_read(uncore, DISP_ARB_CTL) &
-			    DISP_TILE_SURFACE_SWIZZLING) {
-				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
-				swizzle_y = I915_BIT_6_SWIZZLE_9;
-			} else {
-				swizzle_x = I915_BIT_6_SWIZZLE_NONE;
-				swizzle_y = I915_BIT_6_SWIZZLE_NONE;
-			}
-		} else {
-			u32 dimm_c0, dimm_c1;
-			dimm_c0 = intel_uncore_read(uncore, MAD_DIMM_C0);
-			dimm_c1 = intel_uncore_read(uncore, MAD_DIMM_C1);
-			dimm_c0 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
-			dimm_c1 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
-			/*
-			 * Enable swizzling when the channels are populated
-			 * with identically sized dimms. We don't need to check
-			 * the 3rd channel because no cpu with gpu attached
-			 * ships in that configuration. Also, swizzling only
-			 * makes sense for 2 channels anyway.
-			 */
-			if (dimm_c0 == dimm_c1) {
-				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
-				swizzle_y = I915_BIT_6_SWIZZLE_9;
-			} else {
-				swizzle_x = I915_BIT_6_SWIZZLE_NONE;
-				swizzle_y = I915_BIT_6_SWIZZLE_NONE;
-			}
-		}
-	} else if (IS_GEN(i915, 5)) {
-		/*
-		 * On Ironlake whatever DRAM config, GPU always do
-		 * same swizzling setup.
-		 */
-		swizzle_x = I915_BIT_6_SWIZZLE_9_10;
-		swizzle_y = I915_BIT_6_SWIZZLE_9;
-	} else if (IS_GEN(i915, 2)) {
-		/*
-		 * As far as we know, the 865 doesn't have these bit 6
-		 * swizzling issues.
-		 */
-		swizzle_x = I915_BIT_6_SWIZZLE_NONE;
-		swizzle_y = I915_BIT_6_SWIZZLE_NONE;
-	} else if (IS_G45(i915) || IS_I965G(i915) || IS_G33(i915)) {
-		/*
-		 * The 965, G33, and newer, have a very flexible memory
-		 * configuration.  It will enable dual-channel mode
-		 * (interleaving) on as much memory as it can, and the GPU
-		 * will additionally sometimes enable different bit 6
-		 * swizzling for tiled objects from the CPU.
-		 *
-		 * Here's what I found on the G965:
-		 *    slot fill         memory size  swizzling
-		 * 0A   0B   1A   1B    1-ch   2-ch
-		 * 512  0    0    0     512    0     O
-		 * 512  0    512  0     16     1008  X
-		 * 512  0    0    512   16     1008  X
-		 * 0    512  0    512   16     1008  X
-		 * 1024 1024 1024 0     2048   1024  O
-		 *
-		 * We could probably detect this based on either the DRB
-		 * matching, which was the case for the swizzling required in
-		 * the table above, or from the 1-ch value being less than
-		 * the minimum size of a rank.
-		 *
-		 * Reports indicate that the swizzling actually
-		 * varies depending upon page placement inside the
-		 * channels, i.e. we see swizzled pages where the
-		 * banks of memory are paired and unswizzled on the
-		 * uneven portion, so leave that as unknown.
-		 */
-		if (intel_uncore_read(uncore, C0DRB3) ==
-		    intel_uncore_read(uncore, C1DRB3)) {
-			swizzle_x = I915_BIT_6_SWIZZLE_9_10;
-			swizzle_y = I915_BIT_6_SWIZZLE_9;
-		}
-	} else {
-		u32 dcc = intel_uncore_read(uncore, DCC);
-
-		/*
-		 * On 9xx chipsets, channel interleave by the CPU is
-		 * determined by DCC.  For single-channel, neither the CPU
-		 * nor the GPU do swizzling.  For dual channel interleaved,
-		 * the GPU's interleave is bit 9 and 10 for X tiled, and bit
-		 * 9 for Y tiled.  The CPU's interleave is independent, and
-		 * can be based on either bit 11 (haven't seen this yet) or
-		 * bit 17 (common).
-		 */
-		switch (dcc & DCC_ADDRESSING_MODE_MASK) {
-		case DCC_ADDRESSING_MODE_SINGLE_CHANNEL:
-		case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC:
-			swizzle_x = I915_BIT_6_SWIZZLE_NONE;
-			swizzle_y = I915_BIT_6_SWIZZLE_NONE;
-			break;
-		case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED:
-			if (dcc & DCC_CHANNEL_XOR_DISABLE) {
-				/*
-				 * This is the base swizzling by the GPU for
-				 * tiled buffers.
-				 */
-				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
-				swizzle_y = I915_BIT_6_SWIZZLE_9;
-			} else if ((dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
-				/* Bit 11 swizzling by the CPU in addition. */
-				swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
-				swizzle_y = I915_BIT_6_SWIZZLE_9_11;
-			} else {
-				/* Bit 17 swizzling by the CPU in addition. */
-				swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
-				swizzle_y = I915_BIT_6_SWIZZLE_9_17;
-			}
-			break;
-		}
-
-		/* check for L-shaped memory aka modified enhanced addressing */
-		if (IS_GEN(i915, 4) &&
-		    !(intel_uncore_read(uncore, DCC2) & DCC2_MODIFIED_ENHANCED_DISABLE)) {
-			swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
-			swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
-		}
-
-		if (dcc == 0xffffffff) {
-			drm_err(&i915->drm, "Couldn't read from MCHBAR.  "
-				  "Disabling tiling.\n");
-			swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
-			swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
-		}
-	}
-
-	if (swizzle_x == I915_BIT_6_SWIZZLE_UNKNOWN ||
-	    swizzle_y == I915_BIT_6_SWIZZLE_UNKNOWN) {
-		/*
-		 * Userspace likes to explode if it sees unknown swizzling,
-		 * so lie. We will finish the lie when reporting through
-		 * the get-tiling-ioctl by reporting the physical swizzle
-		 * mode as unknown instead.
-		 *
-		 * As we don't strictly know what the swizzling is, it may be
-		 * bit17 dependent, and so we need to also prevent the pages
-		 * from being moved.
-		 */
-		i915->quirks |= QUIRK_PIN_SWIZZLED_PAGES;
-		swizzle_x = I915_BIT_6_SWIZZLE_NONE;
-		swizzle_y = I915_BIT_6_SWIZZLE_NONE;
-	}
-
-	i915->ggtt.bit_6_swizzle_x = swizzle_x;
-	i915->ggtt.bit_6_swizzle_y = swizzle_y;
-}
-
-/*
- * Swap every 64 bytes of this page around, to account for it having a new
- * bit 17 of its physical address and therefore being interpreted differently
- * by the GPU.
- */
-static void i915_gem_swizzle_page(struct page *page)
-{
-	char temp[64];
-	char *vaddr;
-	int i;
-
-	vaddr = kmap(page);
-
-	for (i = 0; i < PAGE_SIZE; i += 128) {
-		memcpy(temp, &vaddr[i], 64);
-		memcpy(&vaddr[i], &vaddr[i + 64], 64);
-		memcpy(&vaddr[i + 64], temp, 64);
-	}
-
-	kunmap(page);
-}
-
-/**
- * i915_gem_object_do_bit_17_swizzle - fixup bit 17 swizzling
- * @obj: i915 GEM buffer object
- * @pages: the scattergather list of physical pages
- *
- * This function fixes up the swizzling in case any page frame number for this
- * object has changed in bit 17 since that state has been saved with
- * i915_gem_object_save_bit_17_swizzle().
- *
- * This is called when pinning backing storage again, since the kernel is free
- * to move unpinned backing storage around (either by directly moving pages or
- * by swapping them out and back in again).
- */
-void
-i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj,
-				  struct sg_table *pages)
-{
-	struct sgt_iter sgt_iter;
-	struct page *page;
-	int i;
-
-	if (obj->bit_17 == NULL)
-		return;
-
-	i = 0;
-	for_each_sgt_page(page, sgt_iter, pages) {
-		char new_bit_17 = page_to_phys(page) >> 17;
-		if ((new_bit_17 & 0x1) != (test_bit(i, obj->bit_17) != 0)) {
-			i915_gem_swizzle_page(page);
-			set_page_dirty(page);
-		}
-		i++;
-	}
-}
-
-/**
- * i915_gem_object_save_bit_17_swizzle - save bit 17 swizzling
- * @obj: i915 GEM buffer object
- * @pages: the scattergather list of physical pages
- *
- * This function saves the bit 17 of each page frame number so that swizzling
- * can be fixed up later on with i915_gem_object_do_bit_17_swizzle(). This must
- * be called before the backing storage can be unpinned.
- */
-void
-i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj,
-				    struct sg_table *pages)
-{
-	const unsigned int page_count = obj->base.size >> PAGE_SHIFT;
-	struct sgt_iter sgt_iter;
-	struct page *page;
-	int i;
-
-	if (obj->bit_17 == NULL) {
-		obj->bit_17 = bitmap_zalloc(page_count, GFP_KERNEL);
-		if (obj->bit_17 == NULL) {
-			DRM_ERROR("Failed to allocate memory for bit 17 "
-				  "record\n");
-			return;
-		}
-	}
-
-	i = 0;
-
-	for_each_sgt_page(page, sgt_iter, pages) {
-		if (page_to_phys(page) & (1 << 17))
-			__set_bit(i, obj->bit_17);
-		else
-			__clear_bit(i, obj->bit_17);
-		i++;
-	}
-}
-
-void i915_ggtt_init_fences(struct i915_ggtt *ggtt)
-{
-	struct drm_i915_private *i915 = ggtt->vm.i915;
-	struct intel_uncore *uncore = ggtt->vm.gt->uncore;
-	int num_fences;
-	int i;
-
-	INIT_LIST_HEAD(&ggtt->fence_list);
-	INIT_LIST_HEAD(&ggtt->userfault_list);
-	intel_wakeref_auto_init(&ggtt->userfault_wakeref, uncore->rpm);
-
-	detect_bit_6_swizzle(ggtt);
-
-	if (!i915_ggtt_has_aperture(ggtt))
-		num_fences = 0;
-	else if (INTEL_GEN(i915) >= 7 &&
-		 !(IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)))
-		num_fences = 32;
-	else if (INTEL_GEN(i915) >= 4 ||
-		 IS_I945G(i915) || IS_I945GM(i915) ||
-		 IS_G33(i915) || IS_PINEVIEW(i915))
-		num_fences = 16;
-	else
-		num_fences = 8;
-
-	if (intel_vgpu_active(i915))
-		num_fences = intel_uncore_read(uncore,
-					       vgtif_reg(avail_rs.fence_num));
-
-	/* Initialize fence registers to zero */
-	for (i = 0; i < num_fences; i++) {
-		struct i915_fence_reg *fence = &ggtt->fence_regs[i];
-
-		fence->ggtt = ggtt;
-		fence->id = i;
-		list_add_tail(&fence->link, &ggtt->fence_list);
-	}
-	ggtt->num_fences = num_fences;
-
-	i915_gem_restore_fences(ggtt);
-}
-
-void intel_gt_init_swizzling(struct intel_gt *gt)
-{
-	struct drm_i915_private *i915 = gt->i915;
-	struct intel_uncore *uncore = gt->uncore;
-
-	if (INTEL_GEN(i915) < 5 ||
-	    i915->ggtt.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_NONE)
-		return;
-
-	intel_uncore_rmw(uncore, DISP_ARB_CTL, 0, DISP_TILE_SURFACE_SWIZZLING);
-
-	if (IS_GEN(i915, 5))
-		return;
-
-	intel_uncore_rmw(uncore, TILECTL, 0, TILECTL_SWZCTL);
-
-	if (IS_GEN(i915, 6))
-		intel_uncore_write(uncore,
-				   ARB_MODE,
-				   _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_SNB));
-	else if (IS_GEN(i915, 7))
-		intel_uncore_write(uncore,
-				   ARB_MODE,
-				   _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_IVB));
-	else if (IS_GEN(i915, 8))
-		intel_uncore_write(uncore,
-				   GAMTARBMODE,
-				   _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_BDW));
-	else
-		MISSING_CASE(INTEL_GEN(i915));
-}
diff --git a/drivers/gpu/drm/i915/i915_gem_fence_reg.h b/drivers/gpu/drm/i915/i915_gem_fence_reg.h
deleted file mode 100644
index 7bd521cd7cd7..000000000000
--- a/drivers/gpu/drm/i915/i915_gem_fence_reg.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright © 2016 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
- * IN THE SOFTWARE.
- *
- */
-
-#ifndef __I915_FENCE_REG_H__
-#define __I915_FENCE_REG_H__
-
-#include <linux/list.h>
-#include <linux/types.h>
-
-struct drm_i915_gem_object;
-struct i915_ggtt;
-struct i915_vma;
-struct intel_gt;
-struct sg_table;
-
-#define I965_FENCE_PAGE 4096UL
-
-struct i915_fence_reg {
-	struct list_head link;
-	struct i915_ggtt *ggtt;
-	struct i915_vma *vma;
-	atomic_t pin_count;
-	int id;
-	/**
-	 * Whether the tiling parameters for the currently
-	 * associated fence register have changed. Note that
-	 * for the purposes of tracking tiling changes we also
-	 * treat the unfenced register, the register slot that
-	 * the object occupies whilst it executes a fenced
-	 * command (such as BLT on gen2/3), as a "fence".
-	 */
-	bool dirty;
-};
-
-/* i915_gem_fence_reg.c */
-struct i915_fence_reg *i915_reserve_fence(struct i915_ggtt *ggtt);
-void i915_unreserve_fence(struct i915_fence_reg *fence);
-
-void i915_gem_restore_fences(struct i915_ggtt *ggtt);
-
-void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj,
-				       struct sg_table *pages);
-void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj,
-					 struct sg_table *pages);
-
-void i915_ggtt_init_fences(struct i915_ggtt *ggtt);
-
-void intel_gt_init_swizzling(struct intel_gt *gt);
-
-#endif
diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c
index 2a4cd0ba5464..eec292d06f11 100644
--- a/drivers/gpu/drm/i915/i915_gpu_error.c
+++ b/drivers/gpu/drm/i915/i915_gpu_error.c
@@ -467,14 +467,14 @@ static void error_print_request(struct drm_i915_error_state_buf *m,
 	if (!erq->seqno)
 		return;
 
-	err_printf(m, "%s pid %d, seqno %8x:%08x%s%s, prio %d, start %08x, head %08x, tail %08x\n",
+	err_printf(m, "%s pid %d, seqno %8x:%08x%s%s, prio %d, head %08x, tail %08x\n",
 		   prefix, erq->pid, erq->context, erq->seqno,
 		   test_bit(DMA_FENCE_FLAG_SIGNALED_BIT,
 			    &erq->flags) ? "!" : "",
 		   test_bit(DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT,
 			    &erq->flags) ? "+" : "",
 		   erq->sched_attr.priority,
-		   erq->start, erq->head, erq->tail);
+		   erq->head, erq->tail);
 }
 
 static void error_print_context(struct drm_i915_error_state_buf *m,
@@ -1207,21 +1207,22 @@ static void engine_record_registers(struct intel_engine_coredump *ee)
 static void record_request(const struct i915_request *request,
 			   struct i915_request_coredump *erq)
 {
-	const struct i915_gem_context *ctx;
-
 	erq->flags = request->fence.flags;
 	erq->context = request->fence.context;
 	erq->seqno = request->fence.seqno;
 	erq->sched_attr = request->sched.attr;
-	erq->start = i915_ggtt_offset(request->ring->vma);
 	erq->head = request->head;
 	erq->tail = request->tail;
 
 	erq->pid = 0;
 	rcu_read_lock();
-	ctx = rcu_dereference(request->context->gem_context);
-	if (ctx)
-		erq->pid = pid_nr(ctx->pid);
+	if (!intel_context_is_closed(request->context)) {
+		const struct i915_gem_context *ctx;
+
+		ctx = rcu_dereference(request->context->gem_context);
+		if (ctx)
+			erq->pid = pid_nr(ctx->pid);
+	}
 	rcu_read_unlock();
 }
 
@@ -1319,26 +1320,6 @@ capture_user(struct intel_engine_capture_vma *capture,
 	return capture;
 }
 
-static struct i915_vma_coredump *
-capture_object(const struct intel_gt *gt,
-	       struct drm_i915_gem_object *obj,
-	       const char *name,
-	       struct i915_vma_compress *compress)
-{
-	if (obj && i915_gem_object_has_pages(obj)) {
-		struct i915_vma fake = {
-			.node = { .start = U64_MAX, .size = obj->base.size },
-			.size = obj->base.size,
-			.pages = obj->mm.pages,
-			.obj = obj,
-		};
-
-		return i915_vma_coredump_create(gt, &fake, name, compress);
-	} else {
-		return NULL;
-	}
-}
-
 static void add_vma(struct intel_engine_coredump *ee,
 		    struct i915_vma_coredump *vma)
 {
@@ -1427,12 +1408,6 @@ intel_engine_coredump_add_vma(struct intel_engine_coredump *ee,
 					 engine->wa_ctx.vma,
 					 "WA context",
 					 compress));
-
-	add_vma(ee,
-		capture_object(engine->gt,
-			       engine->default_state,
-			       "NULL context",
-			       compress));
 }
 
 static struct intel_engine_coredump *
@@ -1858,7 +1833,7 @@ void i915_error_state_store(struct i915_gpu_coredump *error)
 		return;
 
 	i915 = error->i915;
-	dev_info(i915->drm.dev, "%s\n", error_msg(error));
+	drm_info(&i915->drm, "%s\n", error_msg(error));
 
 	if (error->simulated ||
 	    cmpxchg(&i915->gpu_error.first_error, NULL, error))
diff --git a/drivers/gpu/drm/i915/i915_gpu_error.h b/drivers/gpu/drm/i915/i915_gpu_error.h
index 0d1f6c8ff355..76b80fbfb7e9 100644
--- a/drivers/gpu/drm/i915/i915_gpu_error.h
+++ b/drivers/gpu/drm/i915/i915_gpu_error.h
@@ -42,7 +42,7 @@ struct i915_vma_coredump {
 	int num_pages;
 	int page_count;
 	int unused;
-	u32 *pages[0];
+	u32 *pages[];
 };
 
 struct i915_request_coredump {
@@ -50,7 +50,6 @@ struct i915_request_coredump {
 	pid_t pid;
 	u32 context;
 	u32 seqno;
-	u32 start;
 	u32 head;
 	u32 tail;
 	struct i915_sched_attr sched_attr;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9f0653cf0510..bd722d0650c8 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -3358,7 +3358,8 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 {
 	struct intel_uncore *uncore = &dev_priv->uncore;
 
-	u32 de_pipe_masked = GEN8_PIPE_CDCLK_CRC_DONE;
+	u32 de_pipe_masked = gen8_de_pipe_fault_mask(dev_priv) |
+		GEN8_PIPE_CDCLK_CRC_DONE;
 	u32 de_pipe_enables;
 	u32 de_port_masked = GEN8_AUX_CHANNEL_A;
 	u32 de_port_enables;
@@ -3369,13 +3370,10 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 		de_misc_masked |= GEN8_DE_MISC_GSE;
 
 	if (INTEL_GEN(dev_priv) >= 9) {
-		de_pipe_masked |= GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
 		de_port_masked |= GEN9_AUX_CHANNEL_B | GEN9_AUX_CHANNEL_C |
 				  GEN9_AUX_CHANNEL_D;
 		if (IS_GEN9_LP(dev_priv))
 			de_port_masked |= BXT_DE_PORT_GMBUS;
-	} else {
-		de_pipe_masked |= GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
 	}
 
 	if (INTEL_GEN(dev_priv) >= 11)
@@ -3658,7 +3656,7 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg)
 		intel_uncore_write16(&dev_priv->uncore, GEN2_IIR, iir);
 
 		if (iir & I915_USER_INTERRUPT)
-			intel_engine_signal_breadcrumbs(dev_priv->engine[RCS0]);
+			intel_engine_signal_breadcrumbs(dev_priv->gt.engine[RCS0]);
 
 		if (iir & I915_MASTER_ERROR_INTERRUPT)
 			i8xx_error_irq_handler(dev_priv, eir, eir_stuck);
@@ -3763,7 +3761,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
 		I915_WRITE(GEN2_IIR, iir);
 
 		if (iir & I915_USER_INTERRUPT)
-			intel_engine_signal_breadcrumbs(dev_priv->engine[RCS0]);
+			intel_engine_signal_breadcrumbs(dev_priv->gt.engine[RCS0]);
 
 		if (iir & I915_MASTER_ERROR_INTERRUPT)
 			i9xx_error_irq_handler(dev_priv, eir, eir_stuck);
@@ -3905,10 +3903,10 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 		I915_WRITE(GEN2_IIR, iir);
 
 		if (iir & I915_USER_INTERRUPT)
-			intel_engine_signal_breadcrumbs(dev_priv->engine[RCS0]);
+			intel_engine_signal_breadcrumbs(dev_priv->gt.engine[RCS0]);
 
 		if (iir & I915_BSD_USER_INTERRUPT)
-			intel_engine_signal_breadcrumbs(dev_priv->engine[VCS0]);
+			intel_engine_signal_breadcrumbs(dev_priv->gt.engine[VCS0]);
 
 		if (iir & I915_MASTER_ERROR_INTERRUPT)
 			i9xx_error_irq_handler(dev_priv, eir, eir_stuck);
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 2c80a0194c80..1faf9d6ec0a4 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -160,6 +160,7 @@
 	GEN(2), \
 	.is_mobile = 1, \
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B), \
 	.display.has_overlay = 1, \
 	.display.cursor_needs_physical = 1, \
 	.display.overlay_needs_physical = 1, \
@@ -170,6 +171,7 @@
 	.engine_mask = BIT(RCS0), \
 	.has_snoop = true, \
 	.has_coherent_ggtt = false, \
+	.dma_mask_size = 32, \
 	I9XX_PIPE_OFFSETS, \
 	I9XX_CURSOR_OFFSETS, \
 	I9XX_COLORS, \
@@ -179,6 +181,7 @@
 #define I845_FEATURES \
 	GEN(2), \
 	.pipe_mask = BIT(PIPE_A), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A), \
 	.display.has_overlay = 1, \
 	.display.overlay_needs_physical = 1, \
 	.display.has_gmch = 1, \
@@ -188,6 +191,7 @@
 	.engine_mask = BIT(RCS0), \
 	.has_snoop = true, \
 	.has_coherent_ggtt = false, \
+	.dma_mask_size = 32, \
 	I845_PIPE_OFFSETS, \
 	I845_CURSOR_OFFSETS, \
 	I9XX_COLORS, \
@@ -218,11 +222,13 @@ static const struct intel_device_info i865g_info = {
 #define GEN3_FEATURES \
 	GEN(3), \
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B), \
 	.display.has_gmch = 1, \
 	.gpu_reset_clobbers_display = true, \
 	.engine_mask = BIT(RCS0), \
 	.has_snoop = true, \
 	.has_coherent_ggtt = true, \
+	.dma_mask_size = 32, \
 	I9XX_PIPE_OFFSETS, \
 	I9XX_CURSOR_OFFSETS, \
 	I9XX_COLORS, \
@@ -283,6 +289,7 @@ static const struct intel_device_info g33_info = {
 	PLATFORM(INTEL_G33),
 	.display.has_hotplug = 1,
 	.display.has_overlay = 1,
+	.dma_mask_size = 36,
 };
 
 static const struct intel_device_info pnv_g_info = {
@@ -290,6 +297,7 @@ static const struct intel_device_info pnv_g_info = {
 	PLATFORM(INTEL_PINEVIEW),
 	.display.has_hotplug = 1,
 	.display.has_overlay = 1,
+	.dma_mask_size = 36,
 };
 
 static const struct intel_device_info pnv_m_info = {
@@ -298,17 +306,20 @@ static const struct intel_device_info pnv_m_info = {
 	.is_mobile = 1,
 	.display.has_hotplug = 1,
 	.display.has_overlay = 1,
+	.dma_mask_size = 36,
 };
 
 #define GEN4_FEATURES \
 	GEN(4), \
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B), \
 	.display.has_hotplug = 1, \
 	.display.has_gmch = 1, \
 	.gpu_reset_clobbers_display = true, \
 	.engine_mask = BIT(RCS0), \
 	.has_snoop = true, \
 	.has_coherent_ggtt = true, \
+	.dma_mask_size = 36, \
 	I9XX_PIPE_OFFSETS, \
 	I9XX_CURSOR_OFFSETS, \
 	I965_COLORS, \
@@ -354,12 +365,14 @@ static const struct intel_device_info gm45_info = {
 #define GEN5_FEATURES \
 	GEN(5), \
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B), \
 	.display.has_hotplug = 1, \
 	.engine_mask = BIT(RCS0) | BIT(VCS0), \
 	.has_snoop = true, \
 	.has_coherent_ggtt = true, \
 	/* ilk does support rc6, but we do not implement [power] contexts */ \
 	.has_rc6 = 0, \
+	.dma_mask_size = 36, \
 	I9XX_PIPE_OFFSETS, \
 	I9XX_CURSOR_OFFSETS, \
 	ILK_COLORS, \
@@ -381,6 +394,7 @@ static const struct intel_device_info ilk_m_info = {
 #define GEN6_FEATURES \
 	GEN(6), \
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B), \
 	.display.has_hotplug = 1, \
 	.display.has_fbc = 1, \
 	.engine_mask = BIT(RCS0) | BIT(VCS0) | BIT(BCS0), \
@@ -389,6 +403,7 @@ static const struct intel_device_info ilk_m_info = {
 	.has_rc6 = 1, \
 	.has_rc6p = 1, \
 	.has_rps = true, \
+	.dma_mask_size = 40, \
 	.ppgtt_type = INTEL_PPGTT_ALIASING, \
 	.ppgtt_size = 31, \
 	I9XX_PIPE_OFFSETS, \
@@ -430,6 +445,7 @@ static const struct intel_device_info snb_m_gt2_info = {
 #define GEN7_FEATURES  \
 	GEN(7), \
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | BIT(TRANSCODER_C), \
 	.display.has_hotplug = 1, \
 	.display.has_fbc = 1, \
 	.engine_mask = BIT(RCS0) | BIT(VCS0) | BIT(BCS0), \
@@ -438,6 +454,7 @@ static const struct intel_device_info snb_m_gt2_info = {
 	.has_rc6 = 1, \
 	.has_rc6p = 1, \
 	.has_rps = true, \
+	.dma_mask_size = 40, \
 	.ppgtt_type = INTEL_PPGTT_ALIASING, \
 	.ppgtt_size = 31, \
 	IVB_PIPE_OFFSETS, \
@@ -482,6 +499,7 @@ static const struct intel_device_info ivb_q_info = {
 	PLATFORM(INTEL_IVYBRIDGE),
 	.gt = 2,
 	.pipe_mask = 0, /* legal, last one wins */
+	.cpu_transcoder_mask = 0,
 	.has_l3_dpf = 1,
 };
 
@@ -490,11 +508,13 @@ static const struct intel_device_info vlv_info = {
 	GEN(7),
 	.is_lp = 1,
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B),
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B),
 	.has_runtime_pm = 1,
 	.has_rc6 = 1,
 	.has_rps = true,
 	.display.has_gmch = 1,
 	.display.has_hotplug = 1,
+	.dma_mask_size = 40,
 	.ppgtt_type = INTEL_PPGTT_ALIASING,
 	.ppgtt_size = 31,
 	.has_snoop = true,
@@ -511,6 +531,8 @@ static const struct intel_device_info vlv_info = {
 #define G75_FEATURES  \
 	GEN7_FEATURES, \
 	.engine_mask = BIT(RCS0) | BIT(VCS0) | BIT(BCS0) | BIT(VECS0), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | \
+		BIT(TRANSCODER_C) | BIT(TRANSCODER_EDP), \
 	.display.has_ddi = 1, \
 	.has_fpga_dbg = 1, \
 	.display.has_psr = 1, \
@@ -543,6 +565,7 @@ static const struct intel_device_info hsw_gt3_info = {
 	G75_FEATURES, \
 	GEN(8), \
 	.has_logical_ring_contexts = 1, \
+	.dma_mask_size = 39, \
 	.ppgtt_type = INTEL_PPGTT_FULL, \
 	.ppgtt_size = 48, \
 	.has_64bit_reloc = 1, \
@@ -581,6 +604,7 @@ static const struct intel_device_info chv_info = {
 	PLATFORM(INTEL_CHERRYVIEW),
 	GEN(8),
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C),
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | BIT(TRANSCODER_C),
 	.display.has_hotplug = 1,
 	.is_lp = 1,
 	.engine_mask = BIT(RCS0) | BIT(VCS0) | BIT(BCS0) | BIT(VECS0),
@@ -590,6 +614,7 @@ static const struct intel_device_info chv_info = {
 	.has_rps = true,
 	.has_logical_ring_contexts = 1,
 	.display.has_gmch = 1,
+	.dma_mask_size = 39,
 	.ppgtt_type = INTEL_PPGTT_ALIASING,
 	.ppgtt_size = 32,
 	.has_reset_engine = 1,
@@ -656,6 +681,9 @@ static const struct intel_device_info skl_gt4_info = {
 	.display.has_hotplug = 1, \
 	.engine_mask = BIT(RCS0) | BIT(VCS0) | BIT(BCS0) | BIT(VECS0), \
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | \
+		BIT(TRANSCODER_C) | BIT(TRANSCODER_EDP) | \
+		BIT(TRANSCODER_DSI_A) | BIT(TRANSCODER_DSI_C), \
 	.has_64bit_reloc = 1, \
 	.display.has_ddi = 1, \
 	.has_fpga_dbg = 1, \
@@ -670,6 +698,7 @@ static const struct intel_device_info skl_gt4_info = {
 	.has_logical_ring_contexts = 1, \
 	.has_logical_ring_preemption = 1, \
 	.has_gt_uc = 1, \
+	.dma_mask_size = 39, \
 	.ppgtt_type = INTEL_PPGTT_FULL, \
 	.ppgtt_size = 48, \
 	.has_reset_engine = 1, \
@@ -759,6 +788,9 @@ static const struct intel_device_info cnl_info = {
 #define GEN11_FEATURES \
 	GEN10_FEATURES, \
 	GEN11_DEFAULT_PAGE_SIZES, \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | \
+		BIT(TRANSCODER_C) | BIT(TRANSCODER_EDP) | \
+		BIT(TRANSCODER_DSI_0) | BIT(TRANSCODER_DSI_1), \
 	.pipe_offsets = { \
 		[TRANSCODER_A] = PIPE_A_OFFSET, \
 		[TRANSCODER_B] = PIPE_B_OFFSET, \
@@ -799,6 +831,10 @@ static const struct intel_device_info ehl_info = {
 #define GEN12_FEATURES \
 	GEN11_FEATURES, \
 	GEN(12), \
+	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D), \
+	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | \
+		BIT(TRANSCODER_C) | BIT(TRANSCODER_D) | \
+		BIT(TRANSCODER_DSI_0) | BIT(TRANSCODER_DSI_1), \
 	.pipe_offsets = { \
 		[TRANSCODER_A] = PIPE_A_OFFSET, \
 		[TRANSCODER_B] = PIPE_B_OFFSET, \
@@ -822,7 +858,6 @@ static const struct intel_device_info ehl_info = {
 static const struct intel_device_info tgl_info = {
 	GEN12_FEATURES,
 	PLATFORM(INTEL_TIGERLAKE),
-	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
 	.display.has_modular_fia = 1,
 	.engine_mask =
 		BIT(RCS0) | BIT(BCS0) | BIT(VECS0) | BIT(VCS0) | BIT(VCS2),
@@ -920,8 +955,6 @@ static void i915_pci_remove(struct pci_dev *pdev)
 
 	i915_driver_remove(i915);
 	pci_set_drvdata(pdev, NULL);
-
-	drm_dev_put(&i915->drm);
 }
 
 /* is device_id present in comma separated list of ids */
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 66a46e41d5ef..9d3ecabd4264 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -204,21 +204,6 @@
 
 #include "i915_drv.h"
 #include "i915_perf.h"
-#include "oa/i915_oa_hsw.h"
-#include "oa/i915_oa_bdw.h"
-#include "oa/i915_oa_chv.h"
-#include "oa/i915_oa_sklgt2.h"
-#include "oa/i915_oa_sklgt3.h"
-#include "oa/i915_oa_sklgt4.h"
-#include "oa/i915_oa_bxt.h"
-#include "oa/i915_oa_kblgt2.h"
-#include "oa/i915_oa_kblgt3.h"
-#include "oa/i915_oa_glk.h"
-#include "oa/i915_oa_cflgt2.h"
-#include "oa/i915_oa_cflgt3.h"
-#include "oa/i915_oa_cnl.h"
-#include "oa/i915_oa_icl.h"
-#include "oa/i915_oa_tgl.h"
 
 /* HW requires this to be a power of two, between 128k and 16M, though driver
  * is currently generally designed assuming the largest 16M size is used such
@@ -238,26 +223,17 @@
  *
  * Although this can be observed explicitly while copying reports to userspace
  * by checking for a zeroed report-id field in tail reports, we want to account
- * for this earlier, as part of the oa_buffer_check to avoid lots of redundant
- * read() attempts.
- *
- * In effect we define a tail pointer for reading that lags the real tail
- * pointer by at least %OA_TAIL_MARGIN_NSEC nanoseconds, which gives enough
- * time for the corresponding reports to become visible to the CPU.
- *
- * To manage this we actually track two tail pointers:
- *  1) An 'aging' tail with an associated timestamp that is tracked until we
- *     can trust the corresponding data is visible to the CPU; at which point
- *     it is considered 'aged'.
- *  2) An 'aged' tail that can be used for read()ing.
- *
- * The two separate pointers let us decouple read()s from tail pointer aging.
- *
- * The tail pointers are checked and updated at a limited rate within a hrtimer
- * callback (the same callback that is used for delivering EPOLLIN events)
- *
- * Initially the tails are marked invalid with %INVALID_TAIL_PTR which
- * indicates that an updated tail pointer is needed.
+ * for this earlier, as part of the oa_buffer_check_unlocked to avoid lots of
+ * redundant read() attempts.
+ *
+ * We workaround this issue in oa_buffer_check_unlocked() by reading the reports
+ * in the OA buffer, starting from the tail reported by the HW until we find a
+ * report with its first 2 dwords not 0 meaning its previous report is
+ * completely in memory and ready to be read. Those dwords are also set to 0
+ * once read and the whole buffer is cleared upon OA buffer initialization. The
+ * first dword is the reason for this report while the second is the timestamp,
+ * making the chances of having those 2 fields at 0 fairly unlikely. A more
+ * detailed explanation is available in oa_buffer_check_unlocked().
  *
  * Most of the implementation details for this workaround are in
  * oa_buffer_check_unlocked() and _append_oa_reports()
@@ -272,11 +248,11 @@
 #define OA_TAIL_MARGIN_NSEC	100000ULL
 #define INVALID_TAIL_PTR	0xffffffff
 
-/* frequency for checking whether the OA unit has written new reports to the
- * circular OA buffer...
+/* The default frequency for checking whether the OA unit has written new
+ * reports to the circular OA buffer...
  */
-#define POLL_FREQUENCY 200
-#define POLL_PERIOD (NSEC_PER_SEC / POLL_FREQUENCY)
+#define DEFAULT_POLL_FREQUENCY_HZ 200
+#define DEFAULT_POLL_PERIOD_NS (NSEC_PER_SEC / DEFAULT_POLL_FREQUENCY_HZ)
 
 /* for sysctl proc_dointvec_minmax of dev.i915.perf_stream_paranoid */
 static u32 i915_perf_stream_paranoid = true;
@@ -359,6 +335,12 @@ static const struct i915_oa_format gen12_oa_formats[I915_OA_FORMAT_MAX] = {
  * @oa_periodic: Whether to enable periodic OA unit sampling
  * @oa_period_exponent: The OA unit sampling period is derived from this
  * @engine: The engine (typically rcs0) being monitored by the OA unit
+ * @has_sseu: Whether @sseu was specified by userspace
+ * @sseu: internal SSEU configuration computed either from the userspace
+ *        specified configuration in the opening parameters or a default value
+ *        (see get_default_sseu_config())
+ * @poll_oa_period: The period in nanoseconds at which the CPU will check for OA
+ * data availability
  *
  * As read_properties_unlocked() enumerates and validates the properties given
  * to open a stream of metrics the configuration is built up in the structure
@@ -378,6 +360,11 @@ struct perf_open_properties {
 	int oa_period_exponent;
 
 	struct intel_engine_cs *engine;
+
+	bool has_sseu;
+	struct intel_sseu sseu;
+
+	u64 poll_oa_period;
 };
 
 struct i915_oa_config_bo {
@@ -409,10 +396,7 @@ i915_perf_get_oa_config(struct i915_perf *perf, int metrics_set)
 	struct i915_oa_config *oa_config;
 
 	rcu_read_lock();
-	if (metrics_set == 1)
-		oa_config = &perf->test_config;
-	else
-		oa_config = idr_find(&perf->metrics_idr, metrics_set);
+	oa_config = idr_find(&perf->metrics_idr, metrics_set);
 	if (oa_config)
 		oa_config = i915_oa_config_get(oa_config);
 	rcu_read_unlock();
@@ -465,8 +449,8 @@ static u32 gen7_oa_hw_tail_read(struct i915_perf_stream *stream)
  * (See description of OA_TAIL_MARGIN_NSEC above for further details.)
  *
  * Besides returning true when there is data available to read() this function
- * also has the side effect of updating the oa_buffer.tails[], .aging_timestamp
- * and .aged_tail_idx state used for reading.
+ * also updates the tail, aging_tail and aging_timestamp in the oa_buffer
+ * object.
  *
  * Note: It's safe to read OA config state here unlocked, assuming that this is
  * only called while the stream is enabled, while the global OA configuration
@@ -476,28 +460,19 @@ static u32 gen7_oa_hw_tail_read(struct i915_perf_stream *stream)
  */
 static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream)
 {
+	u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
 	int report_size = stream->oa_buffer.format_size;
 	unsigned long flags;
-	unsigned int aged_idx;
-	u32 head, hw_tail, aged_tail, aging_tail;
+	bool pollin;
+	u32 hw_tail;
 	u64 now;
 
 	/* We have to consider the (unlikely) possibility that read() errors
-	 * could result in an OA buffer reset which might reset the head,
-	 * tails[] and aged_tail state.
+	 * could result in an OA buffer reset which might reset the head and
+	 * tail state.
 	 */
 	spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
 
-	/* NB: The head we observe here might effectively be a little out of
-	 * date (between head and tails[aged_idx].offset if there is currently
-	 * a read() in progress.
-	 */
-	head = stream->oa_buffer.head;
-
-	aged_idx = stream->oa_buffer.aged_tail_idx;
-	aged_tail = stream->oa_buffer.tails[aged_idx].offset;
-	aging_tail = stream->oa_buffer.tails[!aged_idx].offset;
-
 	hw_tail = stream->perf->ops.oa_hw_tail_read(stream);
 
 	/* The tail pointer increases in 64 byte increments,
@@ -507,64 +482,63 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream)
 
 	now = ktime_get_mono_fast_ns();
 
-	/* Update the aged tail
-	 *
-	 * Flip the tail pointer available for read()s once the aging tail is
-	 * old enough to trust that the corresponding data will be visible to
-	 * the CPU...
-	 *
-	 * Do this before updating the aging pointer in case we may be able to
-	 * immediately start aging a new pointer too (if new data has become
-	 * available) without needing to wait for a later hrtimer callback.
-	 */
-	if (aging_tail != INVALID_TAIL_PTR &&
-	    ((now - stream->oa_buffer.aging_timestamp) >
-	     OA_TAIL_MARGIN_NSEC)) {
-
-		aged_idx ^= 1;
-		stream->oa_buffer.aged_tail_idx = aged_idx;
+	if (hw_tail == stream->oa_buffer.aging_tail &&
+	    (now - stream->oa_buffer.aging_timestamp) > OA_TAIL_MARGIN_NSEC) {
+		/* If the HW tail hasn't move since the last check and the HW
+		 * tail has been aging for long enough, declare it the new
+		 * tail.
+		 */
+		stream->oa_buffer.tail = stream->oa_buffer.aging_tail;
+	} else {
+		u32 head, tail, aged_tail;
 
-		aged_tail = aging_tail;
+		/* NB: The head we observe here might effectively be a little
+		 * out of date. If a read() is in progress, the head could be
+		 * anywhere between this head and stream->oa_buffer.tail.
+		 */
+		head = stream->oa_buffer.head - gtt_offset;
+		aged_tail = stream->oa_buffer.tail - gtt_offset;
+
+		hw_tail -= gtt_offset;
+		tail = hw_tail;
+
+		/* Walk the stream backward until we find a report with dword 0
+		 * & 1 not at 0. Since the circular buffer pointers progress by
+		 * increments of 64 bytes and that reports can be up to 256
+		 * bytes long, we can't tell whether a report has fully landed
+		 * in memory before the first 2 dwords of the following report
+		 * have effectively landed.
+		 *
+		 * This is assuming that the writes of the OA unit land in
+		 * memory in the order they were written to.
+		 * If not : (╯°□°）╯︵ ┻━┻
+		 */
+		while (OA_TAKEN(tail, aged_tail) >= report_size) {
+			u32 *report32 = (void *)(stream->oa_buffer.vaddr + tail);
 
-		/* Mark that we need a new pointer to start aging... */
-		stream->oa_buffer.tails[!aged_idx].offset = INVALID_TAIL_PTR;
-		aging_tail = INVALID_TAIL_PTR;
-	}
+			if (report32[0] != 0 || report32[1] != 0)
+				break;
 
-	/* Update the aging tail
-	 *
-	 * We throttle aging tail updates until we have a new tail that
-	 * represents >= one report more data than is already available for
-	 * reading. This ensures there will be enough data for a successful
-	 * read once this new pointer has aged and ensures we will give the new
-	 * pointer time to age.
-	 */
-	if (aging_tail == INVALID_TAIL_PTR &&
-	    (aged_tail == INVALID_TAIL_PTR ||
-	     OA_TAKEN(hw_tail, aged_tail) >= report_size)) {
-		struct i915_vma *vma = stream->oa_buffer.vma;
-		u32 gtt_offset = i915_ggtt_offset(vma);
-
-		/* Be paranoid and do a bounds check on the pointer read back
-		 * from hardware, just in case some spurious hardware condition
-		 * could put the tail out of bounds...
-		 */
-		if (hw_tail >= gtt_offset &&
-		    hw_tail < (gtt_offset + OA_BUFFER_SIZE)) {
-			stream->oa_buffer.tails[!aged_idx].offset =
-				aging_tail = hw_tail;
-			stream->oa_buffer.aging_timestamp = now;
-		} else {
-			drm_err(&stream->perf->i915->drm,
-				"Ignoring spurious out of range OA buffer tail pointer = %x\n",
-				hw_tail);
+			tail = (tail - report_size) & (OA_BUFFER_SIZE - 1);
 		}
+
+		if (OA_TAKEN(hw_tail, tail) > report_size &&
+		    __ratelimit(&stream->perf->tail_pointer_race))
+			DRM_NOTE("unlanded report(s) head=0x%x "
+				 "tail=0x%x hw_tail=0x%x\n",
+				 head, tail, hw_tail);
+
+		stream->oa_buffer.tail = gtt_offset + tail;
+		stream->oa_buffer.aging_tail = gtt_offset + hw_tail;
+		stream->oa_buffer.aging_timestamp = now;
 	}
 
+	pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset,
+			  stream->oa_buffer.head - gtt_offset) >= report_size;
+
 	spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
 
-	return aged_tail == INVALID_TAIL_PTR ?
-		false : OA_TAKEN(aged_tail, head) >= report_size;
+	return pollin;
 }
 
 /**
@@ -682,7 +656,6 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream,
 	u32 mask = (OA_BUFFER_SIZE - 1);
 	size_t start_offset = *offset;
 	unsigned long flags;
-	unsigned int aged_tail_idx;
 	u32 head, tail;
 	u32 taken;
 	int ret = 0;
@@ -693,18 +666,10 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream,
 	spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
 
 	head = stream->oa_buffer.head;
-	aged_tail_idx = stream->oa_buffer.aged_tail_idx;
-	tail = stream->oa_buffer.tails[aged_tail_idx].offset;
+	tail = stream->oa_buffer.tail;
 
 	spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
 
-	/*
-	 * An invalid tail pointer here means we're still waiting for the poll
-	 * hrtimer callback to give us a pointer
-	 */
-	if (tail == INVALID_TAIL_PTR)
-		return -EAGAIN;
-
 	/*
 	 * NB: oa_buffer.head/tail include the gtt_offset which we don't want
 	 * while indexing relative to oa_buf_base.
@@ -838,13 +803,11 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream,
 		}
 
 		/*
-		 * The above reason field sanity check is based on
-		 * the assumption that the OA buffer is initially
-		 * zeroed and we reset the field after copying so the
-		 * check is still meaningful once old reports start
-		 * being overwritten.
+		 * Clear out the first 2 dword as a mean to detect unlanded
+		 * reports.
 		 */
 		report32[0] = 0;
+		report32[1] = 0;
 	}
 
 	if (start_offset != *offset) {
@@ -985,7 +948,6 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream,
 	u32 mask = (OA_BUFFER_SIZE - 1);
 	size_t start_offset = *offset;
 	unsigned long flags;
-	unsigned int aged_tail_idx;
 	u32 head, tail;
 	u32 taken;
 	int ret = 0;
@@ -996,17 +958,10 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream,
 	spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
 
 	head = stream->oa_buffer.head;
-	aged_tail_idx = stream->oa_buffer.aged_tail_idx;
-	tail = stream->oa_buffer.tails[aged_tail_idx].offset;
+	tail = stream->oa_buffer.tail;
 
 	spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
 
-	/* An invalid tail pointer here means we're still waiting for the poll
-	 * hrtimer callback to give us a pointer
-	 */
-	if (tail == INVALID_TAIL_PTR)
-		return -EAGAIN;
-
 	/* NB: oa_buffer.head/tail include the gtt_offset which we don't want
 	 * while indexing relative to oa_buf_base.
 	 */
@@ -1064,13 +1019,11 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream,
 		if (ret)
 			break;
 
-		/* The above report-id field sanity check is based on
-		 * the assumption that the OA buffer is initially
-		 * zeroed and we reset the field after copying so the
-		 * check is still meaningful once old reports start
-		 * being overwritten.
+		/* Clear out the first 2 dwords as a mean to detect unlanded
+		 * reports.
 		 */
 		report32[0] = 0;
+		report32[1] = 0;
 	}
 
 	if (start_offset != *offset) {
@@ -1310,8 +1263,7 @@ static int oa_get_render_ctx_id(struct i915_perf_stream *stream)
 			 * dropped by GuC. They won't be part of the context
 			 * ID in the OA reports, so squash those lower bits.
 			 */
-			stream->specific_ctx_id =
-				lower_32_bits(ce->lrc_desc) >> 12;
+			stream->specific_ctx_id = ce->lrc.lrca >> 12;
 
 			/*
 			 * GuC uses the top bit to signal proxy submission, so
@@ -1328,11 +1280,10 @@ static int oa_get_render_ctx_id(struct i915_perf_stream *stream)
 			((1U << GEN11_SW_CTX_ID_WIDTH) - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
 		/*
 		 * Pick an unused context id
-		 * 0 - (NUM_CONTEXT_TAG - 1) are used by other contexts
+		 * 0 - BITS_PER_LONG are used by other contexts
 		 * GEN12_MAX_CONTEXT_HW_ID (0x7ff) is used by idle context
 		 */
 		stream->specific_ctx_id = (GEN12_MAX_CONTEXT_HW_ID - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
-		BUILD_BUG_ON((GEN12_MAX_CONTEXT_HW_ID - 1) < NUM_CONTEXT_TAG);
 		break;
 	}
 
@@ -1449,8 +1400,8 @@ static void gen7_init_oa_buffer(struct i915_perf_stream *stream)
 			   gtt_offset | OABUFFER_SIZE_16M);
 
 	/* Mark that we need updated tail pointers to read from... */
-	stream->oa_buffer.tails[0].offset = INVALID_TAIL_PTR;
-	stream->oa_buffer.tails[1].offset = INVALID_TAIL_PTR;
+	stream->oa_buffer.aging_tail = INVALID_TAIL_PTR;
+	stream->oa_buffer.tail = gtt_offset;
 
 	spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
 
@@ -1472,8 +1423,6 @@ static void gen7_init_oa_buffer(struct i915_perf_stream *stream)
 	 * memory...
 	 */
 	memset(stream->oa_buffer.vaddr, 0, OA_BUFFER_SIZE);
-
-	stream->pollin = false;
 }
 
 static void gen8_init_oa_buffer(struct i915_perf_stream *stream)
@@ -1503,8 +1452,8 @@ static void gen8_init_oa_buffer(struct i915_perf_stream *stream)
 	intel_uncore_write(uncore, GEN8_OATAILPTR, gtt_offset & GEN8_OATAILPTR_MASK);
 
 	/* Mark that we need updated tail pointers to read from... */
-	stream->oa_buffer.tails[0].offset = INVALID_TAIL_PTR;
-	stream->oa_buffer.tails[1].offset = INVALID_TAIL_PTR;
+	stream->oa_buffer.aging_tail = INVALID_TAIL_PTR;
+	stream->oa_buffer.tail = gtt_offset;
 
 	/*
 	 * Reset state used to recognise context switches, affecting which
@@ -1528,8 +1477,6 @@ static void gen8_init_oa_buffer(struct i915_perf_stream *stream)
 	 * memory...
 	 */
 	memset(stream->oa_buffer.vaddr, 0, OA_BUFFER_SIZE);
-
-	stream->pollin = false;
 }
 
 static void gen12_init_oa_buffer(struct i915_perf_stream *stream)
@@ -1559,8 +1506,8 @@ static void gen12_init_oa_buffer(struct i915_perf_stream *stream)
 			   gtt_offset & GEN12_OAG_OATAILPTR_MASK);
 
 	/* Mark that we need updated tail pointers to read from... */
-	stream->oa_buffer.tails[0].offset = INVALID_TAIL_PTR;
-	stream->oa_buffer.tails[1].offset = INVALID_TAIL_PTR;
+	stream->oa_buffer.aging_tail = INVALID_TAIL_PTR;
+	stream->oa_buffer.tail = gtt_offset;
 
 	/*
 	 * Reset state used to recognise context switches, affecting which
@@ -1585,8 +1532,6 @@ static void gen12_init_oa_buffer(struct i915_perf_stream *stream)
 	 */
 	memset(stream->oa_buffer.vaddr, 0,
 	       stream->oa_buffer.vma->size);
-
-	stream->pollin = false;
 }
 
 static int alloc_oa_buffer(struct i915_perf_stream *stream)
@@ -1972,10 +1917,11 @@ get_oa_vma(struct i915_perf_stream *stream, struct i915_oa_config *oa_config)
 	return i915_vma_get(oa_bo->vma);
 }
 
-static struct i915_request *
+static int
 emit_oa_config(struct i915_perf_stream *stream,
 	       struct i915_oa_config *oa_config,
-	       struct intel_context *ce)
+	       struct intel_context *ce,
+	       struct i915_active *active)
 {
 	struct i915_request *rq;
 	struct i915_vma *vma;
@@ -1983,7 +1929,7 @@ emit_oa_config(struct i915_perf_stream *stream,
 
 	vma = get_oa_vma(stream, oa_config);
 	if (IS_ERR(vma))
-		return ERR_CAST(vma);
+		return PTR_ERR(vma);
 
 	err = i915_vma_pin(vma, 0, 0, PIN_GLOBAL | PIN_HIGH);
 	if (err)
@@ -1997,6 +1943,18 @@ emit_oa_config(struct i915_perf_stream *stream,
 		goto err_vma_unpin;
 	}
 
+	if (!IS_ERR_OR_NULL(active)) {
+		/* After all individual context modifications */
+		err = i915_request_await_active(rq, active,
+						I915_ACTIVE_AWAIT_ACTIVE);
+		if (err)
+			goto err_add_request;
+
+		err = i915_active_add_request(active, rq);
+		if (err)
+			goto err_add_request;
+	}
+
 	i915_vma_lock(vma);
 	err = i915_request_await_object(rq, vma->obj, 0);
 	if (!err)
@@ -2011,14 +1969,13 @@ emit_oa_config(struct i915_perf_stream *stream,
 	if (err)
 		goto err_add_request;
 
-	i915_request_get(rq);
 err_add_request:
 	i915_request_add(rq);
 err_vma_unpin:
 	i915_vma_unpin(vma);
 err_vma_put:
 	i915_vma_put(vma);
-	return err ? ERR_PTR(err) : rq;
+	return err;
 }
 
 static struct intel_context *oa_context(struct i915_perf_stream *stream)
@@ -2026,8 +1983,9 @@ static struct intel_context *oa_context(struct i915_perf_stream *stream)
 	return stream->pinned_ctx ?: stream->engine->kernel_context;
 }
 
-static struct i915_request *
-hsw_enable_metric_set(struct i915_perf_stream *stream)
+static int
+hsw_enable_metric_set(struct i915_perf_stream *stream,
+		      struct i915_active *active)
 {
 	struct intel_uncore *uncore = stream->uncore;
 
@@ -2046,7 +2004,9 @@ hsw_enable_metric_set(struct i915_perf_stream *stream)
 	intel_uncore_rmw(uncore, GEN6_UCGCTL1,
 			 0, GEN6_CSUNIT_CLOCK_GATE_DISABLE);
 
-	return emit_oa_config(stream, stream->oa_config, oa_context(stream));
+	return emit_oa_config(stream,
+			      stream->oa_config, oa_context(stream),
+			      active);
 }
 
 static void hsw_disable_metric_set(struct i915_perf_stream *stream)
@@ -2116,9 +2076,6 @@ gen8_update_reg_state_unlocked(const struct intel_context *ce,
 	for (i = 0; i < ARRAY_SIZE(flex_regs); i++)
 		reg_state[ctx_flexeu0 + i * 2 + 1] =
 			oa_config_flex_reg(stream->oa_config, flex_regs[i]);
-
-	reg_state[CTX_R_PWR_CLK_STATE] =
-		intel_sseu_make_rpcs(ce->engine->i915, &ce->sseu);
 }
 
 struct flex {
@@ -2139,7 +2096,7 @@ gen8_store_flex(struct i915_request *rq,
 	if (IS_ERR(cs))
 		return PTR_ERR(cs);
 
-	offset = i915_ggtt_offset(ce->state) + LRC_STATE_PN * PAGE_SIZE;
+	offset = i915_ggtt_offset(ce->state) + LRC_STATE_OFFSET;
 	do {
 		*cs++ = MI_STORE_DWORD_IMM_GEN4 | MI_USE_GGTT;
 		*cs++ = offset + flex->offset * sizeof(u32);
@@ -2196,8 +2153,10 @@ static int gen8_modify_context(struct intel_context *ce,
 	return err;
 }
 
-static int gen8_modify_self(struct intel_context *ce,
-			    const struct flex *flex, unsigned int count)
+static int
+gen8_modify_self(struct intel_context *ce,
+		 const struct flex *flex, unsigned int count,
+		 struct i915_active *active)
 {
 	struct i915_request *rq;
 	int err;
@@ -2208,8 +2167,17 @@ static int gen8_modify_self(struct intel_context *ce,
 	if (IS_ERR(rq))
 		return PTR_ERR(rq);
 
+	if (!IS_ERR_OR_NULL(active)) {
+		err = i915_active_add_request(active, rq);
+		if (err)
+			goto err_add_request;
+	}
+
 	err = gen8_load_flex(rq, ce, flex, count);
+	if (err)
+		goto err_add_request;
 
+err_add_request:
 	i915_request_add(rq);
 	return err;
 }
@@ -2243,7 +2211,8 @@ static int gen8_configure_context(struct i915_gem_context *ctx,
 	return err;
 }
 
-static int gen12_configure_oar_context(struct i915_perf_stream *stream, bool enable)
+static int gen12_configure_oar_context(struct i915_perf_stream *stream,
+				       struct i915_active *active)
 {
 	int err;
 	struct intel_context *ce = stream->pinned_ctx;
@@ -2252,7 +2221,7 @@ static int gen12_configure_oar_context(struct i915_perf_stream *stream, bool ena
 		{
 			GEN8_OACTXCONTROL,
 			stream->perf->ctx_oactxctrl_offset + 1,
-			enable ? GEN8_OA_COUNTER_RESUME : 0,
+			active ? GEN8_OA_COUNTER_RESUME : 0,
 		},
 	};
 	/* Offsets in regs_lri are not used since this configuration is only
@@ -2264,13 +2233,13 @@ static int gen12_configure_oar_context(struct i915_perf_stream *stream, bool ena
 			GEN12_OAR_OACONTROL,
 			GEN12_OAR_OACONTROL_OFFSET + 1,
 			(format << GEN12_OAR_OACONTROL_COUNTER_FORMAT_SHIFT) |
-			(enable ? GEN12_OAR_OACONTROL_COUNTER_ENABLE : 0)
+			(active ? GEN12_OAR_OACONTROL_COUNTER_ENABLE : 0)
 		},
 		{
 			RING_CONTEXT_CONTROL(ce->engine->mmio_base),
 			CTX_CONTEXT_CONTROL,
 			_MASKED_FIELD(GEN12_CTX_CTRL_OAR_CONTEXT_ENABLE,
-				      enable ?
+				      active ?
 				      GEN12_CTX_CTRL_OAR_CONTEXT_ENABLE :
 				      0)
 		},
@@ -2287,7 +2256,7 @@ static int gen12_configure_oar_context(struct i915_perf_stream *stream, bool ena
 		return err;
 
 	/* Apply regs_lri using LRI with pinned context */
-	return gen8_modify_self(ce, regs_lri, ARRAY_SIZE(regs_lri));
+	return gen8_modify_self(ce, regs_lri, ARRAY_SIZE(regs_lri), active);
 }
 
 /*
@@ -2315,9 +2284,11 @@ static int gen12_configure_oar_context(struct i915_perf_stream *stream, bool ena
  * Note: it's only the RCS/Render context that has any OA state.
  * Note: the first flex register passed must always be R_PWR_CLK_STATE
  */
-static int oa_configure_all_contexts(struct i915_perf_stream *stream,
-				     struct flex *regs,
-				     size_t num_regs)
+static int
+oa_configure_all_contexts(struct i915_perf_stream *stream,
+			  struct flex *regs,
+			  size_t num_regs,
+			  struct i915_active *active)
 {
 	struct drm_i915_private *i915 = stream->perf->i915;
 	struct intel_engine_cs *engine;
@@ -2374,7 +2345,7 @@ static int oa_configure_all_contexts(struct i915_perf_stream *stream,
 
 		regs[0].value = intel_sseu_make_rpcs(i915, &ce->sseu);
 
-		err = gen8_modify_self(ce, regs, num_regs);
+		err = gen8_modify_self(ce, regs, num_regs, active);
 		if (err)
 			return err;
 	}
@@ -2382,8 +2353,10 @@ static int oa_configure_all_contexts(struct i915_perf_stream *stream,
 	return 0;
 }
 
-static int gen12_configure_all_contexts(struct i915_perf_stream *stream,
-					const struct i915_oa_config *oa_config)
+static int
+gen12_configure_all_contexts(struct i915_perf_stream *stream,
+			     const struct i915_oa_config *oa_config,
+			     struct i915_active *active)
 {
 	struct flex regs[] = {
 		{
@@ -2392,11 +2365,15 @@ static int gen12_configure_all_contexts(struct i915_perf_stream *stream,
 		},
 	};
 
-	return oa_configure_all_contexts(stream, regs, ARRAY_SIZE(regs));
+	return oa_configure_all_contexts(stream,
+					 regs, ARRAY_SIZE(regs),
+					 active);
 }
 
-static int lrc_configure_all_contexts(struct i915_perf_stream *stream,
-				      const struct i915_oa_config *oa_config)
+static int
+lrc_configure_all_contexts(struct i915_perf_stream *stream,
+			   const struct i915_oa_config *oa_config,
+			   struct i915_active *active)
 {
 	/* The MMIO offsets for Flex EU registers aren't contiguous */
 	const u32 ctx_flexeu0 = stream->perf->ctx_flexeu0_offset;
@@ -2429,11 +2406,14 @@ static int lrc_configure_all_contexts(struct i915_perf_stream *stream,
 	for (i = 2; i < ARRAY_SIZE(regs); i++)
 		regs[i].value = oa_config_flex_reg(oa_config, regs[i].reg);
 
-	return oa_configure_all_contexts(stream, regs, ARRAY_SIZE(regs));
+	return oa_configure_all_contexts(stream,
+					 regs, ARRAY_SIZE(regs),
+					 active);
 }
 
-static struct i915_request *
-gen8_enable_metric_set(struct i915_perf_stream *stream)
+static int
+gen8_enable_metric_set(struct i915_perf_stream *stream,
+		       struct i915_active *active)
 {
 	struct intel_uncore *uncore = stream->uncore;
 	struct i915_oa_config *oa_config = stream->oa_config;
@@ -2473,11 +2453,13 @@ gen8_enable_metric_set(struct i915_perf_stream *stream)
 	 * to make sure all slices/subslices are ON before writing to NOA
 	 * registers.
 	 */
-	ret = lrc_configure_all_contexts(stream, oa_config);
+	ret = lrc_configure_all_contexts(stream, oa_config, active);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
-	return emit_oa_config(stream, oa_config, oa_context(stream));
+	return emit_oa_config(stream,
+			      stream->oa_config, oa_context(stream),
+			      active);
 }
 
 static u32 oag_report_ctx_switches(const struct i915_perf_stream *stream)
@@ -2487,8 +2469,9 @@ static u32 oag_report_ctx_switches(const struct i915_perf_stream *stream)
 			     0 : GEN12_OAG_OA_DEBUG_DISABLE_CTX_SWITCH_REPORTS);
 }
 
-static struct i915_request *
-gen12_enable_metric_set(struct i915_perf_stream *stream)
+static int
+gen12_enable_metric_set(struct i915_perf_stream *stream,
+			struct i915_active *active)
 {
 	struct intel_uncore *uncore = stream->uncore;
 	struct i915_oa_config *oa_config = stream->oa_config;
@@ -2517,9 +2500,9 @@ gen12_enable_metric_set(struct i915_perf_stream *stream)
 	 * to make sure all slices/subslices are ON before writing to NOA
 	 * registers.
 	 */
-	ret = gen12_configure_all_contexts(stream, oa_config);
+	ret = gen12_configure_all_contexts(stream, oa_config, active);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
 	/*
 	 * For Gen12, performance counters are context
@@ -2527,12 +2510,14 @@ gen12_enable_metric_set(struct i915_perf_stream *stream)
 	 * requested this.
 	 */
 	if (stream->ctx) {
-		ret = gen12_configure_oar_context(stream, true);
+		ret = gen12_configure_oar_context(stream, active);
 		if (ret)
-			return ERR_PTR(ret);
+			return ret;
 	}
 
-	return emit_oa_config(stream, oa_config, oa_context(stream));
+	return emit_oa_config(stream,
+			      stream->oa_config, oa_context(stream),
+			      active);
 }
 
 static void gen8_disable_metric_set(struct i915_perf_stream *stream)
@@ -2540,7 +2525,7 @@ static void gen8_disable_metric_set(struct i915_perf_stream *stream)
 	struct intel_uncore *uncore = stream->uncore;
 
 	/* Reset all contexts' slices/subslices configurations. */
-	lrc_configure_all_contexts(stream, NULL);
+	lrc_configure_all_contexts(stream, NULL, NULL);
 
 	intel_uncore_rmw(uncore, GDT_CHICKEN_BITS, GT_NOA_ENABLE, 0);
 }
@@ -2550,7 +2535,7 @@ static void gen10_disable_metric_set(struct i915_perf_stream *stream)
 	struct intel_uncore *uncore = stream->uncore;
 
 	/* Reset all contexts' slices/subslices configurations. */
-	lrc_configure_all_contexts(stream, NULL);
+	lrc_configure_all_contexts(stream, NULL, NULL);
 
 	/* Make sure we disable noa to save power. */
 	intel_uncore_rmw(uncore, RPM_CONFIG1, GEN10_GT_NOA_ENABLE, 0);
@@ -2561,11 +2546,11 @@ static void gen12_disable_metric_set(struct i915_perf_stream *stream)
 	struct intel_uncore *uncore = stream->uncore;
 
 	/* Reset all contexts' slices/subslices configurations. */
-	gen12_configure_all_contexts(stream, NULL);
+	gen12_configure_all_contexts(stream, NULL, NULL);
 
 	/* disable the context save/restore or OAR counters */
 	if (stream->ctx)
-		gen12_configure_oar_context(stream, false);
+		gen12_configure_oar_context(stream, NULL);
 
 	/* Make sure we disable noa to save power. */
 	intel_uncore_rmw(uncore, RPM_CONFIG1, GEN10_GT_NOA_ENABLE, 0);
@@ -2657,11 +2642,13 @@ static void gen12_oa_enable(struct i915_perf_stream *stream)
  */
 static void i915_oa_stream_enable(struct i915_perf_stream *stream)
 {
+	stream->pollin = false;
+
 	stream->perf->ops.oa_enable(stream);
 
 	if (stream->periodic)
 		hrtimer_start(&stream->poll_check_timer,
-			      ns_to_ktime(POLL_PERIOD),
+			      ns_to_ktime(stream->poll_oa_period),
 			      HRTIMER_MODE_REL_PINNED);
 }
 
@@ -2737,16 +2724,52 @@ static const struct i915_perf_stream_ops i915_oa_stream_ops = {
 
 static int i915_perf_stream_enable_sync(struct i915_perf_stream *stream)
 {
-	struct i915_request *rq;
+	struct i915_active *active;
+	int err;
 
-	rq = stream->perf->ops.enable_metric_set(stream);
-	if (IS_ERR(rq))
-		return PTR_ERR(rq);
+	active = i915_active_create();
+	if (!active)
+		return -ENOMEM;
 
-	i915_request_wait(rq, 0, MAX_SCHEDULE_TIMEOUT);
-	i915_request_put(rq);
+	err = stream->perf->ops.enable_metric_set(stream, active);
+	if (err == 0)
+		__i915_active_wait(active, TASK_UNINTERRUPTIBLE);
 
-	return 0;
+	i915_active_put(active);
+	return err;
+}
+
+static void
+get_default_sseu_config(struct intel_sseu *out_sseu,
+			struct intel_engine_cs *engine)
+{
+	const struct sseu_dev_info *devinfo_sseu =
+		&RUNTIME_INFO(engine->i915)->sseu;
+
+	*out_sseu = intel_sseu_from_device_info(devinfo_sseu);
+
+	if (IS_GEN(engine->i915, 11)) {
+		/*
+		 * We only need subslice count so it doesn't matter which ones
+		 * we select - just turn off low bits in the amount of half of
+		 * all available subslices per slice.
+		 */
+		out_sseu->subslice_mask =
+			~(~0 << (hweight8(out_sseu->subslice_mask) / 2));
+		out_sseu->slice_mask = 0x1;
+	}
+}
+
+static int
+get_sseu_config(struct intel_sseu *out_sseu,
+		struct intel_engine_cs *engine,
+		const struct drm_i915_gem_context_param_sseu *drm_sseu)
+{
+	if (drm_sseu->engine.engine_class != engine->uabi_class ||
+	    drm_sseu->engine.engine_instance != engine->uabi_instance)
+		return -EINVAL;
+
+	return i915_gem_user_to_context_sseu(engine->i915, drm_sseu, out_sseu);
 }
 
 /**
@@ -2881,6 +2904,8 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
 		goto err_oa_buf_alloc;
 
 	stream->ops = &i915_oa_stream_ops;
+
+	perf->sseu = props->sseu;
 	WRITE_ONCE(perf->exclusive_stream, stream);
 
 	ret = i915_perf_stream_enable_sync(stream);
@@ -2932,10 +2957,6 @@ void i915_oa_init_reg_state(const struct intel_context *ce,
 
 	/* perf.exclusive_stream serialised by lrc_configure_all_contexts() */
 	stream = READ_ONCE(engine->i915->perf.exclusive_stream);
-	/*
-	 * For gen12, only CTX_R_PWR_CLK_STATE needs update, but the caller
-	 * is already doing that, so nothing to be done for gen12 here.
-	 */
 	if (stream && INTEL_GEN(stream->perf->i915) < 12)
 		gen8_update_reg_state_unlocked(ce, stream);
 }
@@ -3026,7 +3047,8 @@ static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer)
 		wake_up(&stream->poll_wq);
 	}
 
-	hrtimer_forward_now(hrtimer, ns_to_ktime(POLL_PERIOD));
+	hrtimer_forward_now(hrtimer,
+			    ns_to_ktime(stream->poll_oa_period));
 
 	return HRTIMER_RESTART;
 }
@@ -3157,7 +3179,7 @@ static long i915_perf_config_locked(struct i915_perf_stream *stream,
 		return -EINVAL;
 
 	if (config != stream->oa_config) {
-		struct i915_request *rq;
+		int err;
 
 		/*
 		 * If OA is bound to a specific context, emit the
@@ -3168,13 +3190,11 @@ static long i915_perf_config_locked(struct i915_perf_stream *stream,
 		 * When set globally, we use a low priority kernel context,
 		 * so it will effectively take effect when idle.
 		 */
-		rq = emit_oa_config(stream, config, oa_context(stream));
-		if (!IS_ERR(rq)) {
+		err = emit_oa_config(stream, config, oa_context(stream), NULL);
+		if (!err)
 			config = xchg(&stream->oa_config, config);
-			i915_request_put(rq);
-		} else {
-			ret = PTR_ERR(rq);
-		}
+		else
+			ret = err;
 	}
 
 	i915_oa_config_put(config);
@@ -3387,13 +3407,21 @@ i915_perf_open_ioctl_locked(struct i915_perf *perf,
 		privileged_op = true;
 	}
 
+	/*
+	 * Asking for SSEU configuration is a priviliged operation.
+	 */
+	if (props->has_sseu)
+		privileged_op = true;
+	else
+		get_default_sseu_config(&props->sseu, props->engine);
+
 	/* Similar to perf's kernel.perf_paranoid_cpu sysctl option
 	 * we check a dev.i915.perf_stream_paranoid sysctl option
 	 * to determine if it's ok to access system wide OA counters
-	 * without CAP_SYS_ADMIN privileges.
+	 * without CAP_PERFMON or CAP_SYS_ADMIN privileges.
 	 */
 	if (privileged_op &&
-	    i915_perf_stream_paranoid && !capable(CAP_SYS_ADMIN)) {
+	    i915_perf_stream_paranoid && !perfmon_capable()) {
 		DRM_DEBUG("Insufficient privileges to open i915 perf stream\n");
 		ret = -EACCES;
 		goto err_ctx;
@@ -3407,6 +3435,7 @@ i915_perf_open_ioctl_locked(struct i915_perf *perf,
 
 	stream->perf = perf;
 	stream->ctx = specific_ctx;
+	stream->poll_oa_period = props->poll_oa_period;
 
 	ret = i915_oa_stream_init(stream, param, props);
 	if (ret)
@@ -3482,8 +3511,10 @@ static int read_properties_unlocked(struct i915_perf *perf,
 {
 	u64 __user *uprop = uprops;
 	u32 i;
+	int ret;
 
 	memset(props, 0, sizeof(struct perf_open_properties));
+	props->poll_oa_period = DEFAULT_POLL_PERIOD_NS;
 
 	if (!n_props) {
 		DRM_DEBUG("No i915 perf properties given\n");
@@ -3513,7 +3544,6 @@ static int read_properties_unlocked(struct i915_perf *perf,
 	for (i = 0; i < n_props; i++) {
 		u64 oa_period, oa_freq_hz;
 		u64 id, value;
-		int ret;
 
 		ret = get_user(id, uprop);
 		if (ret)
@@ -3586,9 +3616,8 @@ static int read_properties_unlocked(struct i915_perf *perf,
 			} else
 				oa_freq_hz = 0;
 
-			if (oa_freq_hz > i915_oa_max_sample_rate &&
-			    !capable(CAP_SYS_ADMIN)) {
-				DRM_DEBUG("OA exponent would exceed the max sampling frequency (sysctl dev.i915.oa_max_sample_rate) %uHz without root privileges\n",
+			if (oa_freq_hz > i915_oa_max_sample_rate && !perfmon_capable()) {
+				DRM_DEBUG("OA exponent would exceed the max sampling frequency (sysctl dev.i915.oa_max_sample_rate) %uHz without CAP_PERFMON or CAP_SYS_ADMIN privileges\n",
 					  i915_oa_max_sample_rate);
 				return -EACCES;
 			}
@@ -3599,6 +3628,32 @@ static int read_properties_unlocked(struct i915_perf *perf,
 		case DRM_I915_PERF_PROP_HOLD_PREEMPTION:
 			props->hold_preemption = !!value;
 			break;
+		case DRM_I915_PERF_PROP_GLOBAL_SSEU: {
+			struct drm_i915_gem_context_param_sseu user_sseu;
+
+			if (copy_from_user(&user_sseu,
+					   u64_to_user_ptr(value),
+					   sizeof(user_sseu))) {
+				DRM_DEBUG("Unable to copy global sseu parameter\n");
+				return -EFAULT;
+			}
+
+			ret = get_sseu_config(&props->sseu, props->engine, &user_sseu);
+			if (ret) {
+				DRM_DEBUG("Invalid SSEU configuration\n");
+				return ret;
+			}
+			props->has_sseu = true;
+			break;
+		}
+		case DRM_I915_PERF_PROP_POLL_OA_PERIOD:
+			if (value < 100000 /* 100us */) {
+				DRM_DEBUG("OA availability timer too small (%lluns < 100us)\n",
+					  value);
+				return -EINVAL;
+			}
+			props->poll_oa_period = value;
+			break;
 		case DRM_I915_PERF_PROP_MAX:
 			MISSING_CASE(id);
 			return -EINVAL;
@@ -3681,7 +3736,6 @@ int i915_perf_open_ioctl(struct drm_device *dev, void *data,
 void i915_perf_register(struct drm_i915_private *i915)
 {
 	struct i915_perf *perf = &i915->perf;
-	int ret;
 
 	if (!perf->i915)
 		return;
@@ -3695,64 +3749,7 @@ void i915_perf_register(struct drm_i915_private *i915)
 	perf->metrics_kobj =
 		kobject_create_and_add("metrics",
 				       &i915->drm.primary->kdev->kobj);
-	if (!perf->metrics_kobj)
-		goto exit;
-
-	sysfs_attr_init(&perf->test_config.sysfs_metric_id.attr);
-
-	if (IS_TIGERLAKE(i915)) {
-		i915_perf_load_test_config_tgl(i915);
-	} else if (INTEL_GEN(i915) >= 11) {
-		i915_perf_load_test_config_icl(i915);
-	} else if (IS_CANNONLAKE(i915)) {
-		i915_perf_load_test_config_cnl(i915);
-	} else if (IS_COFFEELAKE(i915)) {
-		if (IS_CFL_GT2(i915))
-			i915_perf_load_test_config_cflgt2(i915);
-		if (IS_CFL_GT3(i915))
-			i915_perf_load_test_config_cflgt3(i915);
-	} else if (IS_GEMINILAKE(i915)) {
-		i915_perf_load_test_config_glk(i915);
-	} else if (IS_KABYLAKE(i915)) {
-		if (IS_KBL_GT2(i915))
-			i915_perf_load_test_config_kblgt2(i915);
-		else if (IS_KBL_GT3(i915))
-			i915_perf_load_test_config_kblgt3(i915);
-	} else if (IS_BROXTON(i915)) {
-		i915_perf_load_test_config_bxt(i915);
-	} else if (IS_SKYLAKE(i915)) {
-		if (IS_SKL_GT2(i915))
-			i915_perf_load_test_config_sklgt2(i915);
-		else if (IS_SKL_GT3(i915))
-			i915_perf_load_test_config_sklgt3(i915);
-		else if (IS_SKL_GT4(i915))
-			i915_perf_load_test_config_sklgt4(i915);
-	} else if (IS_CHERRYVIEW(i915)) {
-		i915_perf_load_test_config_chv(i915);
-	} else if (IS_BROADWELL(i915)) {
-		i915_perf_load_test_config_bdw(i915);
-	} else if (IS_HASWELL(i915)) {
-		i915_perf_load_test_config_hsw(i915);
-	}
-
-	if (perf->test_config.id == 0)
-		goto sysfs_error;
-
-	ret = sysfs_create_group(perf->metrics_kobj,
-				 &perf->test_config.sysfs_metric);
-	if (ret)
-		goto sysfs_error;
-
-	perf->test_config.perf = perf;
-	kref_init(&perf->test_config.ref);
-
-	goto exit;
 
-sysfs_error:
-	kobject_put(perf->metrics_kobj);
-	perf->metrics_kobj = NULL;
-
-exit:
 	mutex_unlock(&perf->lock);
 }
 
@@ -3772,9 +3769,6 @@ void i915_perf_unregister(struct drm_i915_private *i915)
 	if (!perf->metrics_kobj)
 		return;
 
-	sysfs_remove_group(perf->metrics_kobj,
-			   &perf->test_config.sysfs_metric);
-
 	kobject_put(perf->metrics_kobj);
 	perf->metrics_kobj = NULL;
 }
@@ -4009,7 +4003,7 @@ int i915_perf_add_config_ioctl(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
-	if (i915_perf_stream_paranoid && !capable(CAP_SYS_ADMIN)) {
+	if (i915_perf_stream_paranoid && !perfmon_capable()) {
 		DRM_DEBUG("Insufficient privileges to add i915 OA config\n");
 		return -EACCES;
 	}
@@ -4156,7 +4150,7 @@ int i915_perf_remove_config_ioctl(struct drm_device *dev, void *data,
 		return -ENOTSUPP;
 	}
 
-	if (i915_perf_stream_paranoid && !capable(CAP_SYS_ADMIN)) {
+	if (i915_perf_stream_paranoid && !perfmon_capable()) {
 		DRM_DEBUG("Insufficient privileges to remove i915 OA config\n");
 		return -EACCES;
 	}
@@ -4373,6 +4367,11 @@ void i915_perf_init(struct drm_i915_private *i915)
 		ratelimit_set_flags(&perf->spurious_report_rs,
 				    RATELIMIT_MSG_ON_RELEASE);
 
+		ratelimit_state_init(&perf->tail_pointer_race,
+				     5 * HZ, 10);
+		ratelimit_set_flags(&perf->tail_pointer_race,
+				    RATELIMIT_MSG_ON_RELEASE);
+
 		atomic64_set(&perf->noa_programming_delay,
 			     500 * 1000 /* 500us */);
 
@@ -4433,8 +4432,15 @@ int i915_perf_ioctl_version(void)
 	 *    preemption on a particular context so that performance data is
 	 *    accessible from a delta of MI_RPC reports without looking at the
 	 *    OA buffer.
+	 *
+	 * 4: Add DRM_I915_PERF_PROP_ALLOWED_SSEU to limit what contexts can
+	 *    be run for the duration of the performance recording based on
+	 *    their SSEU configuration.
+	 *
+	 * 5: Add DRM_I915_PERF_PROP_POLL_OA_PERIOD parameter that controls the
+	 *    interval for the hrtimer used to check for OA data.
 	 */
-	return 3;
+	return 5;
 }
 
 #if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
diff --git a/drivers/gpu/drm/i915/i915_perf_types.h b/drivers/gpu/drm/i915/i915_perf_types.h
index a0e22f00f6cf..a36a455ae336 100644
--- a/drivers/gpu/drm/i915/i915_perf_types.h
+++ b/drivers/gpu/drm/i915/i915_perf_types.h
@@ -16,11 +16,13 @@
 #include <linux/uuid.h>
 #include <linux/wait.h>
 
+#include "gt/intel_sseu.h"
 #include "i915_reg.h"
 #include "intel_wakeref.h"
 
 struct drm_i915_private;
 struct file;
+struct i915_active;
 struct i915_gem_context;
 struct i915_perf;
 struct i915_vma;
@@ -272,21 +274,10 @@ struct i915_perf_stream {
 		spinlock_t ptr_lock;
 
 		/**
-		 * @tails: One 'aging' tail pointer and one 'aged' tail pointer ready to
-		 * used for reading.
-		 *
-		 * Initial values of 0xffffffff are invalid and imply that an
-		 * update is required (and should be ignored by an attempted
-		 * read)
-		 */
-		struct {
-			u32 offset;
-		} tails[2];
-
-		/**
-		 * @aged_tail_idx: Index for the aged tail ready to read() data up to.
+		 * @aging_tail: The last HW tail reported by HW. The data
+		 * might not have made it to memory yet though.
 		 */
-		unsigned int aged_tail_idx;
+		u32 aging_tail;
 
 		/**
 		 * @aging_timestamp: A monotonic timestamp for when the current aging tail pointer
@@ -302,6 +293,11 @@ struct i915_perf_stream {
 		 * OA buffer data to userspace.
 		 */
 		u32 head;
+
+		/**
+		 * @tail: The last verified tail that can be read by userspace.
+		 */
+		u32 tail;
 	} oa_buffer;
 
 	/**
@@ -309,6 +305,12 @@ struct i915_perf_stream {
 	 * reprogrammed.
 	 */
 	struct i915_vma *noa_wait;
+
+	/**
+	 * @poll_oa_period: The period in nanoseconds at which the OA
+	 * buffer should be checked for available data.
+	 */
+	u64 poll_oa_period;
 };
 
 /**
@@ -339,8 +341,8 @@ struct i915_oa_ops {
 	 * counter reports being sampled. May apply system constraints such as
 	 * disabling EU clock gating as required.
 	 */
-	struct i915_request *
-		(*enable_metric_set)(struct i915_perf_stream *stream);
+	int (*enable_metric_set)(struct i915_perf_stream *stream,
+				 struct i915_active *active);
 
 	/**
 	 * @disable_metric_set: Remove system constraints associated with using
@@ -407,13 +409,23 @@ struct i915_perf {
 	 */
 	struct i915_perf_stream *exclusive_stream;
 
+	/**
+	 * @sseu: sseu configuration selected to run while perf is active,
+	 * applies to all contexts.
+	 */
+	struct intel_sseu sseu;
+
 	/**
 	 * For rate limiting any notifications of spurious
 	 * invalid OA reports
 	 */
 	struct ratelimit_state spurious_report_rs;
 
-	struct i915_oa_config test_config;
+	/**
+	 * For rate limiting any notifications of tail pointer
+	 * race.
+	 */
+	struct ratelimit_state tail_pointer_race;
 
 	u32 gen7_latched_oastatus1;
 	u32 ctx_oactxctrl_offset;
diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c
index 2c062534eac1..83c6a8ccd2cb 100644
--- a/drivers/gpu/drm/i915/i915_pmu.c
+++ b/drivers/gpu/drm/i915/i915_pmu.c
@@ -439,29 +439,9 @@ static u64 count_interrupts(struct drm_i915_private *i915)
 	return sum;
 }
 
-static void engine_event_destroy(struct perf_event *event)
-{
-	struct drm_i915_private *i915 =
-		container_of(event->pmu, typeof(*i915), pmu.base);
-	struct intel_engine_cs *engine;
-
-	engine = intel_engine_lookup_user(i915,
-					  engine_event_class(event),
-					  engine_event_instance(event));
-	if (drm_WARN_ON_ONCE(&i915->drm, !engine))
-		return;
-
-	if (engine_event_sample(event) == I915_SAMPLE_BUSY &&
-	    intel_engine_supports_stats(engine))
-		intel_disable_engine_stats(engine);
-}
-
 static void i915_pmu_event_destroy(struct perf_event *event)
 {
 	WARN_ON(event->parent);
-
-	if (is_engine_event(event))
-		engine_event_destroy(event);
 }
 
 static int
@@ -514,23 +494,13 @@ static int engine_event_init(struct perf_event *event)
 	struct drm_i915_private *i915 =
 		container_of(event->pmu, typeof(*i915), pmu.base);
 	struct intel_engine_cs *engine;
-	u8 sample;
-	int ret;
 
 	engine = intel_engine_lookup_user(i915, engine_event_class(event),
 					  engine_event_instance(event));
 	if (!engine)
 		return -ENODEV;
 
-	sample = engine_event_sample(event);
-	ret = engine_event_status(engine, sample);
-	if (ret)
-		return ret;
-
-	if (sample == I915_SAMPLE_BUSY && intel_engine_supports_stats(engine))
-		ret = intel_enable_engine_stats(engine);
-
-	return ret;
+	return engine_event_status(engine, engine_event_sample(event));
 }
 
 static int i915_pmu_event_init(struct perf_event *event)
@@ -1115,7 +1085,7 @@ void i915_pmu_register(struct drm_i915_private *i915)
 	int ret = -ENOMEM;
 
 	if (INTEL_GEN(i915) <= 2) {
-		dev_info(i915->drm.dev, "PMU not supported for this GPU.");
+		drm_info(&i915->drm, "PMU not supported for this GPU.");
 		return;
 	}
 
@@ -1178,7 +1148,7 @@ void i915_pmu_register(struct drm_i915_private *i915)
 	if (!is_igp(i915))
 		kfree(pmu->name);
 err:
-	dev_notice(i915->drm.dev, "Failed to register PMU!\n");
+	drm_notice(&i915->drm, "Failed to register PMU!\n");
 }
 
 void i915_pmu_unregister(struct drm_i915_private *i915)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e0c6021fdaf9..96d9f8853343 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2657,6 +2657,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define RING_DMA_FADD_UDW(base)	_MMIO((base) + 0x60) /* gen8+ */
 #define RING_INSTPM(base)	_MMIO((base) + 0xc0)
 #define RING_MI_MODE(base)	_MMIO((base) + 0x9c)
+#define RING_CMD_BUF_CCTL(base) _MMIO((base) + 0x84)
 #define INSTPS		_MMIO(0x2070) /* 965+ only */
 #define GEN4_INSTDONE1	_MMIO(0x207c) /* 965+ only, aka INSTDONE_2 on SNB */
 #define ACTHD_I965	_MMIO(0x2074)
@@ -3094,6 +3095,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define GT_BSD_CS_ERROR_INTERRUPT		(1 << 15)
 #define GT_BSD_USER_INTERRUPT			(1 << 12)
 #define GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1	(1 << 11) /* hsw+; rsvd on snb, ivb, vlv */
+#define GT_WAIT_SEMAPHORE_INTERRUPT		REG_BIT(11) /* bdw+ */
 #define GT_CONTEXT_SWITCH_INTERRUPT		(1 <<  8)
 #define GT_RENDER_L3_PARITY_ERROR_INTERRUPT	(1 <<  5) /* !snb */
 #define GT_RENDER_PIPECTL_NOTIFY_INTERRUPT	(1 <<  4)
@@ -4012,31 +4014,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define GEN6_RP_STATE_LIMITS	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5994)
 #define GEN6_RP_STATE_CAP	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998)
 #define BXT_RP_STATE_CAP        _MMIO(0x138170)
-
-/*
- * Make these a multiple of magic 25 to avoid SNB (eg. Dell XPS
- * 8300) freezing up around GPU hangs. Looks as if even
- * scheduling/timer interrupts start misbehaving if the RPS
- * EI/thresholds are "bad", leading to a very sluggish or even
- * frozen machine.
- */
-#define INTERVAL_1_28_US(us)	roundup(((us) * 100) >> 7, 25)
-#define INTERVAL_1_33_US(us)	(((us) * 3)   >> 2)
-#define INTERVAL_0_833_US(us)	(((us) * 6) / 5)
-#define GT_INTERVAL_FROM_US(dev_priv, us) (INTEL_GEN(dev_priv) >= 9 ? \
-				(IS_GEN9_LP(dev_priv) ? \
-				INTERVAL_0_833_US(us) : \
-				INTERVAL_1_33_US(us)) : \
-				INTERVAL_1_28_US(us))
-
-#define INTERVAL_1_28_TO_US(interval)  (((interval) << 7) / 100)
-#define INTERVAL_1_33_TO_US(interval)  (((interval) << 2) / 3)
-#define INTERVAL_0_833_TO_US(interval) (((interval) * 5)  / 6)
-#define GT_PM_INTERVAL_TO_US(dev_priv, interval) (INTEL_GEN(dev_priv) >= 9 ? \
-                           (IS_GEN9_LP(dev_priv) ? \
-                           INTERVAL_0_833_TO_US(interval) : \
-                           INTERVAL_1_33_TO_US(interval)) : \
-                           INTERVAL_1_28_TO_US(interval))
+#define GEN9_RP_STATE_LIMITS	_MMIO(0x138148)
 
 /*
  * Logical Context regs
@@ -4324,6 +4302,96 @@ enum {
 #define   EXITLINE_MASK		REG_GENMASK(12, 0)
 #define   EXITLINE_SHIFT	0
 
+/* VRR registers */
+#define _TRANS_VRR_CTL_A		0x60420
+#define _TRANS_VRR_CTL_B		0x61420
+#define _TRANS_VRR_CTL_C		0x62420
+#define _TRANS_VRR_CTL_D		0x63420
+#define TRANS_VRR_CTL(trans)		_MMIO_TRANS2(trans, _TRANS_VRR_CTL_A)
+#define   VRR_CTL_VRR_ENABLE		REG_BIT(31)
+#define   VRR_CTL_IGN_MAX_SHIFT		REG_BIT(30)
+#define   VRR_CTL_FLIP_LINE_EN		REG_BIT(29)
+#define   VRR_CTL_LINE_COUNT_MASK	REG_GENMASK(10, 3)
+#define   VRR_CTL_SW_FULLLINE_COUNT	REG_BIT(0)
+
+#define _TRANS_VRR_VMAX_A		0x60424
+#define _TRANS_VRR_VMAX_B		0x61424
+#define _TRANS_VRR_VMAX_C		0x62424
+#define _TRANS_VRR_VMAX_D		0x63424
+#define TRANS_VRR_VMAX(trans)		_MMIO_TRANS2(trans, _TRANS_VRR_VMAX_A)
+#define   VRR_VMAX_MASK			REG_GENMASK(19, 0)
+
+#define _TRANS_VRR_VMIN_A		0x60434
+#define _TRANS_VRR_VMIN_B		0x61434
+#define _TRANS_VRR_VMIN_C		0x62434
+#define _TRANS_VRR_VMIN_D		0x63434
+#define TRANS_VRR_VMIN(trans)		_MMIO_TRANS2(trans, _TRANS_VRR_VMIN_A)
+#define   VRR_VMIN_MASK			REG_GENMASK(15, 0)
+
+#define _TRANS_VRR_VMAXSHIFT_A		0x60428
+#define _TRANS_VRR_VMAXSHIFT_B		0x61428
+#define _TRANS_VRR_VMAXSHIFT_C		0x62428
+#define _TRANS_VRR_VMAXSHIFT_D		0x63428
+#define TRANS_VRR_VMAXSHIFT(trans)	_MMIO_TRANS2(trans, \
+					_TRANS_VRR_VMAXSHIFT_A)
+#define   VRR_VMAXSHIFT_DEC_MASK	REG_GENMASK(29, 16)
+#define   VRR_VMAXSHIFT_DEC		REG_BIT(16)
+#define   VRR_VMAXSHIFT_INC_MASK	REG_GENMASK(12, 0)
+
+#define _TRANS_VRR_STATUS_A		0x6042C
+#define _TRANS_VRR_STATUS_B		0x6142C
+#define _TRANS_VRR_STATUS_C		0x6242C
+#define _TRANS_VRR_STATUS_D		0x6342C
+#define TRANS_VRR_STATUS(trans)		_MMIO_TRANS2(trans, _TRANS_VRR_STATUS_A)
+#define   VRR_STATUS_VMAX_REACHED	REG_BIT(31)
+#define   VRR_STATUS_NOFLIP_TILL_BNDR	REG_BIT(30)
+#define   VRR_STATUS_FLIP_BEF_BNDR	REG_BIT(29)
+#define   VRR_STATUS_NO_FLIP_FRAME	REG_BIT(28)
+#define   VRR_STATUS_VRR_EN_LIVE	REG_BIT(27)
+#define   VRR_STATUS_FLIPS_SERVICED	REG_BIT(26)
+#define   VRR_STATUS_VBLANK_MASK	REG_GENMASK(22, 20)
+#define   STATUS_FSM_IDLE		REG_FIELD_PREP(VRR_STATUS_VBLANK_MASK, 0)
+#define   STATUS_FSM_WAIT_TILL_FDB	REG_FIELD_PREP(VRR_STATUS_VBLANK_MASK, 1)
+#define   STATUS_FSM_WAIT_TILL_FS	REG_FIELD_PREP(VRR_STATUS_VBLANK_MASK, 2)
+#define   STATUS_FSM_WAIT_TILL_FLIP	REG_FIELD_PREP(VRR_STATUS_VBLANK_MASK, 3)
+#define   STATUS_FSM_PIPELINE_FILL	REG_FIELD_PREP(VRR_STATUS_VBLANK_MASK, 4)
+#define   STATUS_FSM_ACTIVE		REG_FIELD_PREP(VRR_STATUS_VBLANK_MASK, 5)
+#define   STATUS_FSM_LEGACY_VBLANK	REG_FIELD_PREP(VRR_STATUS_VBLANK_MASK, 6)
+
+#define _TRANS_VRR_VTOTAL_PREV_A	0x60480
+#define _TRANS_VRR_VTOTAL_PREV_B	0x61480
+#define _TRANS_VRR_VTOTAL_PREV_C	0x62480
+#define _TRANS_VRR_VTOTAL_PREV_D	0x63480
+#define TRANS_VRR_VTOTAL_PREV(trans)	_MMIO_TRANS2(trans, \
+					_TRANS_VRR_VTOTAL_PREV_A)
+#define   VRR_VTOTAL_FLIP_BEFR_BNDR	REG_BIT(31)
+#define   VRR_VTOTAL_FLIP_AFTER_BNDR	REG_BIT(30)
+#define   VRR_VTOTAL_FLIP_AFTER_DBLBUF	REG_BIT(29)
+#define   VRR_VTOTAL_PREV_FRAME_MASK	REG_GENMASK(19, 0)
+
+#define _TRANS_VRR_FLIPLINE_A		0x60438
+#define _TRANS_VRR_FLIPLINE_B		0x61438
+#define _TRANS_VRR_FLIPLINE_C		0x62438
+#define _TRANS_VRR_FLIPLINE_D		0x63438
+#define TRANS_VRR_FLIPLINE(trans)	_MMIO_TRANS2(trans, \
+					_TRANS_VRR_FLIPLINE_A)
+#define   VRR_FLIPLINE_MASK		REG_GENMASK(19, 0)
+
+#define _TRANS_VRR_STATUS2_A		0x6043C
+#define _TRANS_VRR_STATUS2_B		0x6143C
+#define _TRANS_VRR_STATUS2_C		0x6243C
+#define _TRANS_VRR_STATUS2_D		0x6343C
+#define TRANS_VRR_STATUS2(trans)	_MMIO_TRANS2(trans, _TRANS_VRR_STATUS2_A)
+#define   VRR_STATUS2_VERT_LN_CNT_MASK	REG_GENMASK(19, 0)
+
+#define _TRANS_PUSH_A			0x60A70
+#define _TRANS_PUSH_B			0x61A70
+#define _TRANS_PUSH_C			0x62A70
+#define _TRANS_PUSH_D			0x63A70
+#define TRANS_PUSH(trans)		_MMIO_TRANS2(trans, _TRANS_PUSH_A)
+#define   TRANS_PUSH_EN			REG_BIT(31)
+#define   TRANS_PUSH_SEND		REG_BIT(30)
+
 /*
  * HSW+ eDP PSR registers
  *
@@ -6764,7 +6832,7 @@ enum {
 #define   PLANE_CTL_FORMAT_P012			(5 << 24)
 #define   PLANE_CTL_FORMAT_XRGB_16161616F	(6 << 24)
 #define   PLANE_CTL_FORMAT_P016			(7 << 24)
-#define   PLANE_CTL_FORMAT_AYUV			(8 << 24)
+#define   PLANE_CTL_FORMAT_XYUV			(8 << 24)
 #define   PLANE_CTL_FORMAT_INDEXED		(12 << 24)
 #define   PLANE_CTL_FORMAT_RGB_565		(14 << 24)
 #define   ICL_PLANE_CTL_FORMAT_MASK		(0x1f << 23)
@@ -9017,8 +9085,13 @@ enum {
 #define     ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point)	(((point) << 16) | (0x1 << 8))
 #define   GEN6_PCODE_READ_D_COMP		0x10
 #define   GEN6_PCODE_WRITE_D_COMP		0x11
+#define   ICL_PCODE_EXIT_TCCOLD			0x12
 #define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
 #define   DISPLAY_IPS_CONTROL			0x19
+#define   TGL_PCODE_TCCOLD			0x26
+#define     TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED	REG_BIT(0)
+#define     TGL_PCODE_EXIT_TCCOLD_DATA_H_BLOCK_REQ	0
+#define     TGL_PCODE_EXIT_TCCOLD_DATA_H_UNBLOCK_REQ	REG_BIT(0)
             /* See also IPS_CTL */
 #define     IPS_PCODE_CONTROL			(1 << 30)
 #define   HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL	0x1A
@@ -9305,6 +9378,22 @@ enum {
 #define AUD_PIN_BUF_CTL		_MMIO(0x48414)
 #define   AUD_PIN_BUF_ENABLE		REG_BIT(31)
 
+/* Display Audio Config Reg */
+#define AUD_CONFIG_BE			_MMIO(0x65ef0)
+#define HBLANK_EARLY_ENABLE_ICL(pipe)		(0x1 << (20 - (pipe)))
+#define HBLANK_EARLY_ENABLE_TGL(pipe)		(0x1 << (24 + (pipe)))
+#define HBLANK_START_COUNT_MASK(pipe)		(0x7 << (3 + ((pipe) * 6)))
+#define HBLANK_START_COUNT(pipe, val)		(((val) & 0x7) << (3 + ((pipe)) * 6))
+#define NUMBER_SAMPLES_PER_LINE_MASK(pipe)	(0x3 << ((pipe) * 6))
+#define NUMBER_SAMPLES_PER_LINE(pipe, val)	(((val) & 0x3) << ((pipe) * 6))
+
+#define HBLANK_START_COUNT_8	0
+#define HBLANK_START_COUNT_16	1
+#define HBLANK_START_COUNT_32	2
+#define HBLANK_START_COUNT_64	3
+#define HBLANK_START_COUNT_96	4
+#define HBLANK_START_COUNT_128	5
+
 /*
  * HSW - ICL power wells
  *
@@ -9700,8 +9789,11 @@ enum skl_power_gate {
 #define  TRANS_DDI_BPC_10		(1 << 20)
 #define  TRANS_DDI_BPC_6		(2 << 20)
 #define  TRANS_DDI_BPC_12		(3 << 20)
+#define  TRANS_DDI_PORT_SYNC_MASTER_SELECT_MASK	REG_GENMASK(19, 18) /* bdw-cnl */
+#define  TRANS_DDI_PORT_SYNC_MASTER_SELECT(x)	REG_FIELD_PREP(TRANS_DDI_PORT_SYNC_MASTER_SELECT_MASK, (x))
 #define  TRANS_DDI_PVSYNC		(1 << 17)
 #define  TRANS_DDI_PHSYNC		(1 << 16)
+#define  TRANS_DDI_PORT_SYNC_ENABLE	REG_BIT(15) /* bdw-cnl */
 #define  TRANS_DDI_EDP_INPUT_MASK	(7 << 12)
 #define  TRANS_DDI_EDP_INPUT_A_ON	(0 << 12)
 #define  TRANS_DDI_EDP_INPUT_A_ONOFF	(4 << 12)
@@ -9728,12 +9820,10 @@ enum skl_power_gate {
 #define _TRANS_DDI_FUNC_CTL2_EDP	0x6f404
 #define _TRANS_DDI_FUNC_CTL2_DSI0	0x6b404
 #define _TRANS_DDI_FUNC_CTL2_DSI1	0x6bc04
-#define TRANS_DDI_FUNC_CTL2(tran)	_MMIO_TRANS2(tran, \
-						     _TRANS_DDI_FUNC_CTL2_A)
-#define  PORT_SYNC_MODE_ENABLE			(1 << 4)
-#define  PORT_SYNC_MODE_MASTER_SELECT(x)	((x) << 0)
-#define  PORT_SYNC_MODE_MASTER_SELECT_MASK	(0x7 << 0)
-#define  PORT_SYNC_MODE_MASTER_SELECT_SHIFT	0
+#define TRANS_DDI_FUNC_CTL2(tran)	_MMIO_TRANS2(tran, _TRANS_DDI_FUNC_CTL2_A)
+#define  PORT_SYNC_MODE_ENABLE			REG_BIT(4)
+#define  PORT_SYNC_MODE_MASTER_SELECT_MASK	REG_GENMASK(2, 0)
+#define  PORT_SYNC_MODE_MASTER_SELECT(x)	REG_FIELD_PREP(PORT_SYNC_MODE_MASTER_SELECT_MASK, (x))
 
 /* DisplayPort Transport Control */
 #define _DP_TP_CTL_A			0x64040
@@ -9794,6 +9884,24 @@ enum skl_power_gate {
 #define  DDI_BUF_BALANCE_LEG_ENABLE	(1 << 31)
 #define DDI_BUF_TRANS_HI(port, i)	_MMIO(_PORT(port, _DDI_BUF_TRANS_A, _DDI_BUF_TRANS_B) + (i) * 8 + 4)
 
+/* DDI DP Compliance Control */
+#define _DDI_DP_COMP_CTL_A			0x605F0
+#define _DDI_DP_COMP_CTL_B			0x615F0
+#define DDI_DP_COMP_CTL(pipe)			_MMIO_PIPE(pipe, _DDI_DP_COMP_CTL_A, _DDI_DP_COMP_CTL_B)
+#define   DDI_DP_COMP_CTL_ENABLE		(1 << 31)
+#define   DDI_DP_COMP_CTL_D10_2			(0 << 28)
+#define   DDI_DP_COMP_CTL_SCRAMBLED_0		(1 << 28)
+#define   DDI_DP_COMP_CTL_PRBS7			(2 << 28)
+#define   DDI_DP_COMP_CTL_CUSTOM80		(3 << 28)
+#define   DDI_DP_COMP_CTL_HBR2			(4 << 28)
+#define   DDI_DP_COMP_CTL_SCRAMBLED_1		(5 << 28)
+#define   DDI_DP_COMP_CTL_HBR2_RESET		(0xFC << 0)
+
+/* DDI DP Compliance Pattern */
+#define _DDI_DP_COMP_PAT_A			0x605F4
+#define _DDI_DP_COMP_PAT_B			0x615F4
+#define DDI_DP_COMP_PAT(pipe, i)		_MMIO(_PIPE(pipe, _DDI_DP_COMP_PAT_A, _DDI_DP_COMP_PAT_B) + (i) * 4)
+
 /* Sideband Interface (SBI) is programmed indirectly, via
  * SBI_ADDR, which contains the register offset; and SBI_DATA,
  * which contains the payload */
@@ -10741,6 +10849,12 @@ enum skl_power_gate {
 
 #define _PAL_PREC_MULTI_SEG_DATA_A	0x4A40C
 #define _PAL_PREC_MULTI_SEG_DATA_B	0x4AC0C
+#define  PAL_PREC_MULTI_SEG_RED_LDW_MASK   REG_GENMASK(29, 24)
+#define  PAL_PREC_MULTI_SEG_RED_UDW_MASK   REG_GENMASK(29, 20)
+#define  PAL_PREC_MULTI_SEG_GREEN_LDW_MASK REG_GENMASK(19, 14)
+#define  PAL_PREC_MULTI_SEG_GREEN_UDW_MASK REG_GENMASK(19, 10)
+#define  PAL_PREC_MULTI_SEG_BLUE_LDW_MASK  REG_GENMASK(9, 4)
+#define  PAL_PREC_MULTI_SEG_BLUE_UDW_MASK  REG_GENMASK(9, 0)
 
 #define PREC_PAL_MULTI_SEG_INDEX(pipe)	_MMIO_PIPE(pipe, \
 					_PAL_PREC_MULTI_SEG_INDEX_A, \
diff --git a/drivers/gpu/drm/i915/i915_request.c b/drivers/gpu/drm/i915/i915_request.c
index c0df71d7d0ff..22635bbabf06 100644
--- a/drivers/gpu/drm/i915/i915_request.c
+++ b/drivers/gpu/drm/i915/i915_request.c
@@ -101,6 +101,11 @@ static signed long i915_fence_wait(struct dma_fence *fence,
 				 timeout);
 }
 
+struct kmem_cache *i915_request_slab_cache(void)
+{
+	return global.slab_requests;
+}
+
 static void i915_fence_release(struct dma_fence *fence)
 {
 	struct i915_request *rq = to_request(fence);
@@ -115,6 +120,10 @@ static void i915_fence_release(struct dma_fence *fence)
 	i915_sw_fence_fini(&rq->submit);
 	i915_sw_fence_fini(&rq->semaphore);
 
+	/* Keep one request on each engine for reserved use under mempressure */
+	if (!cmpxchg(&rq->engine->request_pool, NULL, rq))
+		return;
+
 	kmem_cache_free(global.slab_requests, rq);
 }
 
@@ -629,14 +638,22 @@ static void retire_requests(struct intel_timeline *tl)
 }
 
 static noinline struct i915_request *
-request_alloc_slow(struct intel_timeline *tl, gfp_t gfp)
+request_alloc_slow(struct intel_timeline *tl,
+		   struct i915_request **rsvd,
+		   gfp_t gfp)
 {
 	struct i915_request *rq;
 
-	if (list_empty(&tl->requests))
-		goto out;
+	/* If we cannot wait, dip into our reserves */
+	if (!gfpflags_allow_blocking(gfp)) {
+		rq = xchg(rsvd, NULL);
+		if (!rq) /* Use the normal failure path for one final WARN */
+			goto out;
 
-	if (!gfpflags_allow_blocking(gfp))
+		return rq;
+	}
+
+	if (list_empty(&tl->requests))
 		goto out;
 
 	/* Move our oldest request to the slab-cache (if not in use!) */
@@ -721,7 +738,7 @@ __i915_request_create(struct intel_context *ce, gfp_t gfp)
 	rq = kmem_cache_alloc(global.slab_requests,
 			      gfp | __GFP_RETRY_MAYFAIL | __GFP_NOWARN);
 	if (unlikely(!rq)) {
-		rq = request_alloc_slow(tl, gfp);
+		rq = request_alloc_slow(tl, &ce->engine->request_pool, gfp);
 		if (!rq) {
 			ret = -ENOMEM;
 			goto err_unreserve;
@@ -1444,9 +1461,7 @@ void i915_request_add(struct i915_request *rq)
 	if (list_empty(&rq->sched.signalers_list))
 		attr.priority |= I915_PRIORITY_WAIT;
 
-	local_bh_disable();
 	__i915_request_queue(rq, &attr);
-	local_bh_enable(); /* Kick the execlists tasklet if just scheduled */
 
 	mutex_unlock(&tl->mutex);
 }
diff --git a/drivers/gpu/drm/i915/i915_request.h b/drivers/gpu/drm/i915/i915_request.h
index 3c552bfea67a..d8ce908e1346 100644
--- a/drivers/gpu/drm/i915/i915_request.h
+++ b/drivers/gpu/drm/i915/i915_request.h
@@ -300,6 +300,8 @@ static inline bool dma_fence_is_i915(const struct dma_fence *fence)
 	return fence->ops == &i915_fence_ops;
 }
 
+struct kmem_cache *i915_request_slab_cache(void);
+
 struct i915_request * __must_check
 __i915_request_create(struct intel_context *ce, gfp_t gfp);
 struct i915_request * __must_check
diff --git a/drivers/gpu/drm/i915/i915_scheduler.c b/drivers/gpu/drm/i915/i915_scheduler.c
index 68b06a7ba667..37cfcf5b321b 100644
--- a/drivers/gpu/drm/i915/i915_scheduler.c
+++ b/drivers/gpu/drm/i915/i915_scheduler.c
@@ -209,6 +209,12 @@ static void kick_submission(struct intel_engine_cs *engine,
 	if (!inflight)
 		goto unlock;
 
+	ENGINE_TRACE(engine,
+		     "bumping queue-priority-hint:%d for rq:%llx:%lld, inflight:%llx:%lld prio %d\n",
+		     prio,
+		     rq->fence.context, rq->fence.seqno,
+		     inflight->fence.context, inflight->fence.seqno,
+		     inflight->sched.attr.priority);
 	engine->execlists.queue_priority_hint = prio;
 
 	/*
@@ -464,11 +470,15 @@ int i915_sched_node_add_dependency(struct i915_sched_node *node,
 	if (!dep)
 		return -ENOMEM;
 
+	local_bh_disable();
+
 	if (!__i915_sched_node_add_dependency(node, signal, dep,
 					      I915_DEPENDENCY_EXTERNAL |
 					      I915_DEPENDENCY_ALLOC))
 		i915_dependency_free(dep);
 
+	local_bh_enable(); /* kick submission tasklet */
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/i915/i915_sw_fence.c b/drivers/gpu/drm/i915/i915_sw_fence.c
index a3d38e089b6e..7daf81f55c90 100644
--- a/drivers/gpu/drm/i915/i915_sw_fence.c
+++ b/drivers/gpu/drm/i915/i915_sw_fence.c
@@ -421,7 +421,7 @@ static void timer_i915_sw_fence_wake(struct timer_list *t)
 	if (!fence)
 		return;
 
-	pr_notice("Asynchronous wait on fence %s:%s:%llx timed out (hint:%pS)\n",
+	pr_notice("Asynchronous wait on fence %s:%s:%llx timed out (hint:%ps)\n",
 		  cb->dma->ops->get_driver_name(cb->dma),
 		  cb->dma->ops->get_timeline_name(cb->dma),
 		  cb->dma->seqno,
diff --git a/drivers/gpu/drm/i915/i915_sw_fence_work.c b/drivers/gpu/drm/i915/i915_sw_fence_work.c
index 997b2998f1f2..a3a81bb8f2c3 100644
--- a/drivers/gpu/drm/i915/i915_sw_fence_work.c
+++ b/drivers/gpu/drm/i915/i915_sw_fence_work.c
@@ -38,7 +38,10 @@ fence_notify(struct i915_sw_fence *fence, enum i915_sw_fence_notify state)
 
 		if (!f->dma.error) {
 			dma_fence_get(&f->dma);
-			queue_work(system_unbound_wq, &f->work);
+			if (test_bit(DMA_FENCE_WORK_IMM, &f->dma.flags))
+				fence_work(&f->work);
+			else
+				queue_work(system_unbound_wq, &f->work);
 		} else {
 			fence_complete(f);
 		}
diff --git a/drivers/gpu/drm/i915/i915_sw_fence_work.h b/drivers/gpu/drm/i915/i915_sw_fence_work.h
index 3a22b287e201..2c409f11c5c5 100644
--- a/drivers/gpu/drm/i915/i915_sw_fence_work.h
+++ b/drivers/gpu/drm/i915/i915_sw_fence_work.h
@@ -32,6 +32,10 @@ struct dma_fence_work {
 	const struct dma_fence_work_ops *ops;
 };
 
+enum {
+	DMA_FENCE_WORK_IMM = DMA_FENCE_FLAG_USER_BITS,
+};
+
 void dma_fence_work_init(struct dma_fence_work *f,
 			 const struct dma_fence_work_ops *ops);
 int dma_fence_work_chain(struct dma_fence_work *f, struct dma_fence *signal);
@@ -41,4 +45,23 @@ static inline void dma_fence_work_commit(struct dma_fence_work *f)
 	i915_sw_fence_commit(&f->chain);
 }
 
+/**
+ * dma_fence_work_commit_imm: Commit the fence, and if possible execute locally.
+ * @f: the fenced worker
+ *
+ * Instead of always scheduling a worker to execute the callback (see
+ * dma_fence_work_commit()), we try to execute the callback immediately in
+ * the local context. It is required that the fence be committed before it
+ * is published, and that no other threads try to tamper with the number
+ * of asynchronous waits on the fence (or else the callback will be
+ * executed in the wrong context, i.e. not the callers).
+ */
+static inline void dma_fence_work_commit_imm(struct dma_fence_work *f)
+{
+	if (atomic_read(&f->chain.pending) <= 1)
+		__set_bit(DMA_FENCE_WORK_IMM, &f->dma.flags);
+
+	dma_fence_work_commit(f);
+}
+
 #endif /* I915_SW_FENCE_WORK_H */
diff --git a/drivers/gpu/drm/i915/i915_switcheroo.c b/drivers/gpu/drm/i915/i915_switcheroo.c
index ed69b5d4a375..b3a24eac21f1 100644
--- a/drivers/gpu/drm/i915/i915_switcheroo.c
+++ b/drivers/gpu/drm/i915/i915_switcheroo.c
@@ -20,14 +20,14 @@ static void i915_switcheroo_set_state(struct pci_dev *pdev,
 	}
 
 	if (state == VGA_SWITCHEROO_ON) {
-		pr_info("switched on\n");
+		drm_info(&i915->drm, "switched on\n");
 		i915->drm.switch_power_state = DRM_SWITCH_POWER_CHANGING;
 		/* i915 resume handler doesn't set to D0 */
 		pci_set_power_state(pdev, PCI_D0);
 		i915_resume_switcheroo(i915);
 		i915->drm.switch_power_state = DRM_SWITCH_POWER_ON;
 	} else {
-		pr_info("switched off\n");
+		drm_info(&i915->drm, "switched off\n");
 		i915->drm.switch_power_state = DRM_SWITCH_POWER_CHANGING;
 		i915_suspend_switcheroo(i915, pmm);
 		i915->drm.switch_power_state = DRM_SWITCH_POWER_OFF;
diff --git a/drivers/gpu/drm/i915/i915_utils.c b/drivers/gpu/drm/i915/i915_utils.c
index 029854ae65fc..e28eae4a8f70 100644
--- a/drivers/gpu/drm/i915/i915_utils.c
+++ b/drivers/gpu/drm/i915/i915_utils.c
@@ -101,5 +101,6 @@ void set_timer_ms(struct timer_list *t, unsigned long timeout)
 	 */
 	barrier();
 
-	mod_timer(t, jiffies + timeout);
+	/* Keep t->expires = 0 reserved to indicate a canceled timer. */
+	mod_timer(t, jiffies + timeout ?: 1);
 }
diff --git a/drivers/gpu/drm/i915/i915_vma.c b/drivers/gpu/drm/i915/i915_vma.c
index 08699fa069aa..fc14ebf9a0b7 100644
--- a/drivers/gpu/drm/i915/i915_vma.c
+++ b/drivers/gpu/drm/i915/i915_vma.c
@@ -158,16 +158,18 @@ vma_create(struct drm_i915_gem_object *obj,
 
 	GEM_BUG_ON(!IS_ALIGNED(vma->size, I915_GTT_PAGE_SIZE));
 
+	spin_lock(&obj->vma.lock);
+
 	if (i915_is_ggtt(vm)) {
 		if (unlikely(overflows_type(vma->size, u32)))
-			goto err_vma;
+			goto err_unlock;
 
 		vma->fence_size = i915_gem_fence_size(vm->i915, vma->size,
 						      i915_gem_object_get_tiling(obj),
 						      i915_gem_object_get_stride(obj));
 		if (unlikely(vma->fence_size < vma->size || /* overflow */
 			     vma->fence_size > vm->total))
-			goto err_vma;
+			goto err_unlock;
 
 		GEM_BUG_ON(!IS_ALIGNED(vma->fence_size, I915_GTT_MIN_ALIGNMENT));
 
@@ -179,8 +181,6 @@ vma_create(struct drm_i915_gem_object *obj,
 		__set_bit(I915_VMA_GGTT_BIT, __i915_vma_flags(vma));
 	}
 
-	spin_lock(&obj->vma.lock);
-
 	rb = NULL;
 	p = &obj->vma.tree.rb_node;
 	while (*p) {
@@ -225,6 +225,8 @@ vma_create(struct drm_i915_gem_object *obj,
 
 	return vma;
 
+err_unlock:
+	spin_unlock(&obj->vma.lock);
 err_vma:
 	i915_vma_free(vma);
 	return ERR_PTR(-E2BIG);
@@ -520,7 +522,6 @@ void i915_vma_unpin_and_release(struct i915_vma **p_vma, unsigned int flags)
 	GEM_BUG_ON(!obj);
 
 	i915_vma_unpin(vma);
-	i915_vma_close(vma);
 
 	if (flags & I915_VMA_RELEASE_MAP)
 		i915_gem_object_unpin_map(obj);
@@ -608,18 +609,6 @@ bool i915_gem_valid_gtt_space(struct i915_vma *vma, unsigned long color)
 	return true;
 }
 
-static void assert_bind_count(const struct drm_i915_gem_object *obj)
-{
-	/*
-	 * Combine the assertion that the object is bound and that we have
-	 * pinned its pages. But we should never have bound the object
-	 * more than we have pinned its pages. (For complete accuracy, we
-	 * assume that no else is pinning the pages, but as a rough assertion
-	 * that we will not run into problems later, this will do!)
-	 */
-	GEM_BUG_ON(atomic_read(&obj->mm.pages_pin_count) < atomic_read(&obj->bind_count));
-}
-
 /**
  * i915_vma_insert - finds a slot for the vma in its address space
  * @vma: the vma
@@ -738,12 +727,6 @@ i915_vma_insert(struct i915_vma *vma, u64 size, u64 alignment, u64 flags)
 	GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
 	GEM_BUG_ON(!i915_gem_valid_gtt_space(vma, color));
 
-	if (vma->obj) {
-		struct drm_i915_gem_object *obj = vma->obj;
-
-		atomic_inc(&obj->bind_count);
-		assert_bind_count(obj);
-	}
 	list_add_tail(&vma->vm_link, &vma->vm->bound_list);
 
 	return 0;
@@ -761,12 +744,6 @@ i915_vma_detach(struct i915_vma *vma)
 	 * it to be reaped by the shrinker.
 	 */
 	list_del(&vma->vm_link);
-	if (vma->obj) {
-		struct drm_i915_gem_object *obj = vma->obj;
-
-		assert_bind_count(obj);
-		atomic_dec(&obj->bind_count);
-	}
 }
 
 static bool try_qad_pin(struct i915_vma *vma, unsigned int flags)
@@ -913,11 +890,30 @@ int i915_vma_pin(struct i915_vma *vma, u64 size, u64 alignment, u64 flags)
 	if (flags & PIN_GLOBAL)
 		wakeref = intel_runtime_pm_get(&vma->vm->i915->runtime_pm);
 
-	/* No more allocations allowed once we hold vm->mutex */
-	err = mutex_lock_interruptible(&vma->vm->mutex);
+	/*
+	 * Differentiate between user/kernel vma inside the aliasing-ppgtt.
+	 *
+	 * We conflate the Global GTT with the user's vma when using the
+	 * aliasing-ppgtt, but it is still vitally important to try and
+	 * keep the use cases distinct. For example, userptr objects are
+	 * not allowed inside the Global GTT as that will cause lock
+	 * inversions when we have to evict them the mmu_notifier callbacks -
+	 * but they are allowed to be part of the user ppGTT which can never
+	 * be mapped. As such we try to give the distinct users of the same
+	 * mutex, distinct lockclasses [equivalent to how we keep i915_ggtt
+	 * and i915_ppgtt separate].
+	 *
+	 * NB this may cause us to mask real lock inversions -- while the
+	 * code is safe today, lockdep may not be able to spot future
+	 * transgressions.
+	 */
+	err = mutex_lock_interruptible_nested(&vma->vm->mutex,
+					      !(flags & PIN_GLOBAL));
 	if (err)
 		goto err_fence;
 
+	/* No more allocations allowed now we hold vm->mutex */
+
 	if (unlikely(i915_vma_is_closed(vma))) {
 		err = -ENOENT;
 		goto err_unlock;
@@ -980,7 +976,7 @@ int i915_vma_pin(struct i915_vma *vma, u64 size, u64 alignment, u64 flags)
 	mutex_unlock(&vma->vm->mutex);
 err_fence:
 	if (work)
-		dma_fence_work_commit(&work->base);
+		dma_fence_work_commit_imm(&work->base);
 	if (wakeref)
 		intel_runtime_pm_put(&vma->vm->i915->runtime_pm, wakeref);
 err_pages:
@@ -1026,13 +1022,8 @@ int i915_ggtt_pin(struct i915_vma *vma, u32 align, unsigned int flags)
 	} while (1);
 }
 
-void i915_vma_close(struct i915_vma *vma)
+static void __vma_close(struct i915_vma *vma, struct intel_gt *gt)
 {
-	struct intel_gt *gt = vma->vm->gt;
-	unsigned long flags;
-
-	GEM_BUG_ON(i915_vma_is_closed(vma));
-
 	/*
 	 * We defer actually closing, unbinding and destroying the VMA until
 	 * the next idle point, or if the object is freed in the meantime. By
@@ -1045,9 +1036,25 @@ void i915_vma_close(struct i915_vma *vma)
 	 * causing us to rebind the VMA once more. This ends up being a lot
 	 * of wasted work for the steady state.
 	 */
-	spin_lock_irqsave(&gt->closed_lock, flags);
+	GEM_BUG_ON(i915_vma_is_closed(vma));
 	list_add(&vma->closed_link, &gt->closed_vma);
-	spin_unlock_irqrestore(&gt->closed_lock, flags);
+}
+
+void i915_vma_close(struct i915_vma *vma)
+{
+	struct intel_gt *gt = vma->vm->gt;
+	unsigned long flags;
+
+	if (i915_vma_is_ggtt(vma))
+		return;
+
+	GEM_BUG_ON(!atomic_read(&vma->open_count));
+	if (atomic_dec_and_lock_irqsave(&vma->open_count,
+					&gt->closed_lock,
+					flags)) {
+		__vma_close(vma, gt);
+		spin_unlock_irqrestore(&gt->closed_lock, flags);
+	}
 }
 
 static void __i915_vma_remove_closed(struct i915_vma *vma)
@@ -1172,7 +1179,8 @@ int __i915_vma_move_to_active(struct i915_vma *vma, struct i915_request *rq)
 	GEM_BUG_ON(!i915_vma_is_pinned(vma));
 
 	/* Wait for the vma to be bound before we start! */
-	err = i915_request_await_active(rq, &vma->active, 0);
+	err = i915_request_await_active(rq, &vma->active,
+					I915_ACTIVE_AWAIT_EXCL);
 	if (err)
 		return err;
 
@@ -1213,6 +1221,10 @@ int i915_vma_move_to_active(struct i915_vma *vma,
 		dma_resv_add_shared_fence(vma->resv, &rq->fence);
 		obj->write_domain = 0;
 	}
+
+	if (flags & EXEC_OBJECT_NEEDS_FENCE && vma->fence)
+		i915_active_add_request(&vma->fence->active, rq);
+
 	obj->read_domains |= I915_GEM_GPU_DOMAINS;
 	obj->mm.dirty = true;
 
@@ -1226,18 +1238,6 @@ int __i915_vma_unbind(struct i915_vma *vma)
 
 	lockdep_assert_held(&vma->vm->mutex);
 
-	/*
-	 * First wait upon any activity as retiring the request may
-	 * have side-effects such as unpinning or even unbinding this vma.
-	 *
-	 * XXX Actually waiting under the vm->mutex is a hinderance and
-	 * should be pipelined wherever possible. In cases where that is
-	 * unavoidable, we should lift the wait to before the mutex.
-	 */
-	ret = i915_vma_sync(vma);
-	if (ret)
-		return ret;
-
 	if (i915_vma_is_pinned(vma)) {
 		vma_print_allocator(vma, "is pinned");
 		return -EAGAIN;
@@ -1259,6 +1259,9 @@ int __i915_vma_unbind(struct i915_vma *vma)
 	GEM_BUG_ON(i915_vma_is_active(vma));
 
 	if (i915_vma_is_map_and_fenceable(vma)) {
+		/* Force a pagefault for domain tracking on next user access */
+		i915_vma_revoke_mmap(vma);
+
 		/*
 		 * Check that we have flushed all writes through the GGTT
 		 * before the unbind, other due to non-strict nature of those
@@ -1275,12 +1278,7 @@ int __i915_vma_unbind(struct i915_vma *vma)
 		i915_vma_flush_writes(vma);
 
 		/* release the fence reg _after_ flushing */
-		ret = i915_vma_revoke_fence(vma);
-		if (ret)
-			return ret;
-
-		/* Force a pagefault for domain tracking on next user access */
-		i915_vma_revoke_mmap(vma);
+		i915_vma_revoke_fence(vma);
 
 		__i915_vma_iounmap(vma);
 		clear_bit(I915_VMA_CAN_FENCE_BIT, __i915_vma_flags(vma));
@@ -1311,16 +1309,21 @@ int i915_vma_unbind(struct i915_vma *vma)
 	if (!drm_mm_node_allocated(&vma->node))
 		return 0;
 
-	if (i915_vma_is_bound(vma, I915_VMA_GLOBAL_BIND))
-		/* XXX not always required: nop_clear_range */
-		wakeref = intel_runtime_pm_get(&vm->i915->runtime_pm);
-
 	/* Optimistic wait before taking the mutex */
 	err = i915_vma_sync(vma);
 	if (err)
 		goto out_rpm;
 
-	err = mutex_lock_interruptible(&vm->mutex);
+	if (i915_vma_is_pinned(vma)) {
+		vma_print_allocator(vma, "is pinned");
+		return -EAGAIN;
+	}
+
+	if (i915_vma_is_bound(vma, I915_VMA_GLOBAL_BIND))
+		/* XXX not always required: nop_clear_range */
+		wakeref = intel_runtime_pm_get(&vm->i915->runtime_pm);
+
+	err = mutex_lock_interruptible_nested(&vma->vm->mutex, !wakeref);
 	if (err)
 		goto out_rpm;
 
diff --git a/drivers/gpu/drm/i915/i915_vma.h b/drivers/gpu/drm/i915/i915_vma.h
index e1ced1df13e1..8ad1daabcd58 100644
--- a/drivers/gpu/drm/i915/i915_vma.h
+++ b/drivers/gpu/drm/i915/i915_vma.h
@@ -30,10 +30,10 @@
 
 #include <drm/drm_mm.h>
 
+#include "gt/intel_ggtt_fencing.h"
 #include "gem/i915_gem_object.h"
 
 #include "i915_gem_gtt.h"
-#include "i915_gem_fence_reg.h"
 
 #include "i915_active.h"
 #include "i915_request.h"
@@ -326,7 +326,7 @@ static inline struct page *i915_vma_first_page(struct i915_vma *vma)
  * True if the vma has a fence, false otherwise.
  */
 int __must_check i915_vma_pin_fence(struct i915_vma *vma);
-int __must_check i915_vma_revoke_fence(struct i915_vma *vma);
+void i915_vma_revoke_fence(struct i915_vma *vma);
 
 int __i915_vma_pin_fence(struct i915_vma *vma);
 
diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
index d7fe12734db8..91bb7891c70c 100644
--- a/drivers/gpu/drm/i915/intel_device_info.c
+++ b/drivers/gpu/drm/i915/intel_device_info.c
@@ -98,6 +98,7 @@ void intel_device_info_print_static(const struct intel_device_info *info,
 	drm_printf(p, "platform: %s\n", intel_platform_name(info->platform));
 	drm_printf(p, "ppgtt-size: %d\n", info->ppgtt_size);
 	drm_printf(p, "ppgtt-type: %d\n", info->ppgtt_type);
+	drm_printf(p, "dma_mask_size: %u\n", info->dma_mask_size);
 
 #define PRINT_FLAG(name) drm_printf(p, "%s: %s\n", #name, yesno(info->name));
 	DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG);
@@ -980,35 +981,32 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
 			drm_info(&dev_priv->drm,
 				 "Display fused off, disabling\n");
 			info->pipe_mask = 0;
+			info->cpu_transcoder_mask = 0;
 		} else if (fuse_strap & IVB_PIPE_C_DISABLE) {
 			drm_info(&dev_priv->drm, "PipeC fused off\n");
 			info->pipe_mask &= ~BIT(PIPE_C);
+			info->cpu_transcoder_mask &= ~BIT(TRANSCODER_C);
 		}
 	} else if (HAS_DISPLAY(dev_priv) && INTEL_GEN(dev_priv) >= 9) {
 		u32 dfsm = I915_READ(SKL_DFSM);
-		u8 enabled_mask = info->pipe_mask;
-
-		if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
-			enabled_mask &= ~BIT(PIPE_A);
-		if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
-			enabled_mask &= ~BIT(PIPE_B);
-		if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
-			enabled_mask &= ~BIT(PIPE_C);
-		if (INTEL_GEN(dev_priv) >= 12 &&
-		    (dfsm & TGL_DFSM_PIPE_D_DISABLE))
-			enabled_mask &= ~BIT(PIPE_D);
 
-		/*
-		 * At least one pipe should be enabled and if there are
-		 * disabled pipes, they should be the last ones, with no holes
-		 * in the mask.
-		 */
-		if (enabled_mask == 0 || !is_power_of_2(enabled_mask + 1))
-			drm_err(&dev_priv->drm,
-				"invalid pipe fuse configuration: enabled_mask=0x%x\n",
-				enabled_mask);
-		else
-			info->pipe_mask = enabled_mask;
+		if (dfsm & SKL_DFSM_PIPE_A_DISABLE) {
+			info->pipe_mask &= ~BIT(PIPE_A);
+			info->cpu_transcoder_mask &= ~BIT(TRANSCODER_A);
+		}
+		if (dfsm & SKL_DFSM_PIPE_B_DISABLE) {
+			info->pipe_mask &= ~BIT(PIPE_B);
+			info->cpu_transcoder_mask &= ~BIT(TRANSCODER_B);
+		}
+		if (dfsm & SKL_DFSM_PIPE_C_DISABLE) {
+			info->pipe_mask &= ~BIT(PIPE_C);
+			info->cpu_transcoder_mask &= ~BIT(TRANSCODER_C);
+		}
+		if (INTEL_GEN(dev_priv) >= 12 &&
+		    (dfsm & TGL_DFSM_PIPE_D_DISABLE)) {
+			info->pipe_mask &= ~BIT(PIPE_D);
+			info->cpu_transcoder_mask &= ~BIT(TRANSCODER_D);
+		}
 
 		if (dfsm & SKL_DFSM_DISPLAY_HDCP_DISABLE)
 			info->display.has_hdcp = 0;
diff --git a/drivers/gpu/drm/i915/intel_device_info.h b/drivers/gpu/drm/i915/intel_device_info.h
index 1ecb9df2de91..69c9257c6c6a 100644
--- a/drivers/gpu/drm/i915/intel_device_info.h
+++ b/drivers/gpu/drm/i915/intel_device_info.h
@@ -158,6 +158,8 @@ struct intel_device_info {
 
 	enum intel_platform platform;
 
+	unsigned int dma_mask_size; /* available DMA address bits */
+
 	enum intel_ppgtt_type ppgtt_type;
 	unsigned int ppgtt_size; /* log2, e.g. 31/32/48 bits */
 
@@ -168,6 +170,7 @@ struct intel_device_info {
 	u32 display_mmio_offset;
 
 	u8 pipe_mask;
+	u8 cpu_transcoder_mask;
 
 #define DEFINE_FLAG(name) u8 name:1
 	DEV_INFO_FOR_EACH_FLAG(DEFINE_FLAG);
diff --git a/drivers/gpu/drm/i915/intel_dram.c b/drivers/gpu/drm/i915/intel_dram.c
index 6b922efb1d7c..8aa12cad93ce 100644
--- a/drivers/gpu/drm/i915/intel_dram.c
+++ b/drivers/gpu/drm/i915/intel_dram.c
@@ -495,6 +495,5 @@ void intel_dram_edram_detect(struct drm_i915_private *i915)
 	else
 		i915->edram_size_mb = gen9_edram_size_mb(i915, edram_cap);
 
-	dev_info(i915->drm.dev,
-		 "Found %uMB of eDRAM\n", i915->edram_size_mb);
+	drm_info(&i915->drm, "Found %uMB of eDRAM\n", i915->edram_size_mb);
 }
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 8375054ba27d..bfb180fe8047 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3757,42 +3757,38 @@ intel_disable_sagv(struct drm_i915_private *dev_priv)
 	return 0;
 }
 
-bool intel_can_enable_sagv(struct intel_atomic_state *state)
+void intel_sagv_pre_plane_update(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+
+	if (!intel_can_enable_sagv(state))
+		intel_disable_sagv(dev_priv);
+}
+
+void intel_sagv_post_plane_update(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+
+	if (intel_can_enable_sagv(state))
+		intel_enable_sagv(dev_priv);
+}
+
+static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
 {
-	struct drm_device *dev = state->base.dev;
+	struct drm_device *dev = crtc_state->uapi.crtc->dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct intel_crtc *crtc;
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct intel_plane *plane;
-	struct intel_crtc_state *crtc_state;
-	enum pipe pipe;
 	int level, latency;
 
-	if (!intel_has_sagv(dev_priv))
-		return false;
-
-	/*
-	 * If there are no active CRTCs, no additional checks need be performed
-	 */
-	if (hweight8(state->active_pipes) == 0)
+	if (!crtc_state->hw.active)
 		return true;
 
-	/*
-	 * SKL+ workaround: bspec recommends we disable SAGV when we have
-	 * more then one pipe enabled
-	 */
-	if (hweight8(state->active_pipes) > 1)
-		return false;
-
-	/* Since we're now guaranteed to only have one active CRTC... */
-	pipe = ffs(state->active_pipes) - 1;
-	crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
-	crtc_state = to_intel_crtc_state(crtc->base.state);
-
 	if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
 		return false;
 
 	for_each_intel_plane_on_crtc(dev, crtc, plane) {
-		struct skl_plane_wm *wm =
+		const struct skl_plane_wm *wm =
 			&crtc_state->wm.skl.optimal.planes[plane->id];
 
 		/* Skip this plane if it's not enabled */
@@ -3823,6 +3819,37 @@ bool intel_can_enable_sagv(struct intel_atomic_state *state)
 	return true;
 }
 
+bool intel_can_enable_sagv(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	struct intel_crtc *crtc;
+	const struct intel_crtc_state *crtc_state;
+	enum pipe pipe;
+
+	if (!intel_has_sagv(dev_priv))
+		return false;
+
+	/*
+	 * If there are no active CRTCs, no additional checks need be performed
+	 */
+	if (hweight8(state->active_pipes) == 0)
+		return true;
+
+	/*
+	 * SKL+ workaround: bspec recommends we disable SAGV when we have
+	 * more then one pipe enabled
+	 */
+	if (hweight8(state->active_pipes) > 1)
+		return false;
+
+	/* Since we're now guaranteed to only have one active CRTC... */
+	pipe = ffs(state->active_pipes) - 1;
+	crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
+	crtc_state = to_intel_crtc_state(crtc->base.state);
+
+	return intel_crtc_can_enable_sagv(crtc_state);
+}
+
 /*
  * Calculate initial DBuf slice offset, based on slice size
  * and mask(i.e if slice size is 1024 and second slice is enabled
@@ -4016,6 +4043,7 @@ static int skl_compute_wm_params(const struct intel_crtc_state *crtc_state,
 				 int color_plane);
 static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
 				 int level,
+				 unsigned int latency,
 				 const struct skl_wm_params *wp,
 				 const struct skl_wm_level *result_prev,
 				 struct skl_wm_level *result /* out */);
@@ -4038,7 +4066,9 @@ skl_cursor_allocation(const struct intel_crtc_state *crtc_state,
 	drm_WARN_ON(&dev_priv->drm, ret);
 
 	for (level = 0; level <= max_level; level++) {
-		skl_compute_plane_wm(crtc_state, level, &wp, &wm, &wm);
+		unsigned int latency = dev_priv->wm.skl_latency[level];
+
+		skl_compute_plane_wm(crtc_state, level, latency, &wp, &wm, &wm);
 		if (wm.min_ddb_alloc == U16_MAX)
 			break;
 
@@ -4972,12 +5002,12 @@ static bool skl_wm_has_lines(struct drm_i915_private *dev_priv, int level)
 
 static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
 				 int level,
+				 unsigned int latency,
 				 const struct skl_wm_params *wp,
 				 const struct skl_wm_level *result_prev,
 				 struct skl_wm_level *result /* out */)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
-	u32 latency = dev_priv->wm.skl_latency[level];
 	uint_fixed_16_16_t method1, method2;
 	uint_fixed_16_16_t selected_result;
 	u32 res_blocks, res_lines, min_ddb_alloc = 0;
@@ -5106,9 +5136,10 @@ skl_compute_wm_levels(const struct intel_crtc_state *crtc_state,
 
 	for (level = 0; level <= max_level; level++) {
 		struct skl_wm_level *result = &levels[level];
+		unsigned int latency = dev_priv->wm.skl_latency[level];
 
-		skl_compute_plane_wm(crtc_state, level, wm_params,
-				     result_prev, result);
+		skl_compute_plane_wm(crtc_state, level, latency,
+				     wm_params, result_prev, result);
 
 		result_prev = result;
 	}
@@ -5424,8 +5455,8 @@ static bool skl_plane_wm_equals(struct drm_i915_private *dev_priv,
 	return skl_wm_level_equals(&wm1->trans_wm, &wm2->trans_wm);
 }
 
-static inline bool skl_ddb_entries_overlap(const struct skl_ddb_entry *a,
-					   const struct skl_ddb_entry *b)
+static bool skl_ddb_entries_overlap(const struct skl_ddb_entry *a,
+				    const struct skl_ddb_entry *b)
 {
 	return a->start < b->end && b->start < a->end;
 }
@@ -5876,8 +5907,7 @@ static void ilk_optimize_watermarks(struct intel_atomic_state *state,
 	mutex_unlock(&dev_priv->wm.wm_mutex);
 }
 
-static inline void skl_wm_level_from_reg_val(u32 val,
-					     struct skl_wm_level *level)
+static void skl_wm_level_from_reg_val(u32 val, struct skl_wm_level *level)
 {
 	level->plane_en = val & PLANE_WM_EN;
 	level->ignore_lines = val & PLANE_WM_IGNORE_LINES;
@@ -6850,6 +6880,10 @@ static void tgl_init_clock_gating(struct drm_i915_private *dev_priv)
 	if (IS_TGL_REVID(dev_priv, TGL_REVID_A0, TGL_REVID_A0))
 		I915_WRITE(GEN9_CLKGATE_DIS_3, I915_READ(GEN9_CLKGATE_DIS_3) |
 			   TGL_VRH_GATING_DIS);
+
+	/* Wa_14011059788:tgl */
+	intel_uncore_rmw(&dev_priv->uncore, GEN10_DFR_RATIO_EN_AND_CHICKEN,
+			 0, DFR_DISABLE);
 }
 
 static void cnp_init_clock_gating(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
index d60a85421c5a..9a6036ab0f90 100644
--- a/drivers/gpu/drm/i915/intel_pm.h
+++ b/drivers/gpu/drm/i915/intel_pm.h
@@ -44,6 +44,8 @@ void vlv_wm_sanitize(struct drm_i915_private *dev_priv);
 bool intel_can_enable_sagv(struct intel_atomic_state *state);
 int intel_enable_sagv(struct drm_i915_private *dev_priv);
 int intel_disable_sagv(struct drm_i915_private *dev_priv);
+void intel_sagv_pre_plane_update(struct intel_atomic_state *state);
+void intel_sagv_post_plane_update(struct intel_atomic_state *state);
 bool skl_wm_level_equals(const struct skl_wm_level *l1,
 			 const struct skl_wm_level *l2);
 bool skl_ddb_allocation_overlaps(const struct skl_ddb_entry *ddb,
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index ad719c9602af..9cb2d7548daa 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -549,7 +549,7 @@ void intel_runtime_pm_enable(struct intel_runtime_pm *rpm)
 	 * becaue the HDA driver may require us to enable the audio power
 	 * domain during system suspend.
 	 */
-	dev_pm_set_driver_flags(kdev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(kdev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	pm_runtime_set_autosuspend_delay(kdev, 10000); /* 10s */
 	pm_runtime_mark_last_busy(kdev);
diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c
index 3f13baaef058..14daf6af6854 100644
--- a/drivers/gpu/drm/i915/intel_sideband.c
+++ b/drivers/gpu/drm/i915/intel_sideband.c
@@ -336,7 +336,7 @@ void intel_sbi_write(struct drm_i915_private *i915, u16 reg, u32 value,
 	intel_sbi_rw(i915, reg, destination, &value, false);
 }
 
-static inline int gen6_check_mailbox_status(u32 mbox)
+static int gen6_check_mailbox_status(u32 mbox)
 {
 	switch (mbox & GEN6_PCODE_ERROR_MASK) {
 	case GEN6_PCODE_SUCCESS:
@@ -356,7 +356,7 @@ static inline int gen6_check_mailbox_status(u32 mbox)
 	}
 }
 
-static inline int gen7_check_mailbox_status(u32 mbox)
+static int gen7_check_mailbox_status(u32 mbox)
 {
 	switch (mbox & GEN6_PCODE_ERROR_MASK) {
 	case GEN6_PCODE_SUCCESS:
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index abb18b90d7c3..078f5b2eb8a4 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -665,7 +665,7 @@ void intel_uncore_forcewake_user_put(struct intel_uncore *uncore)
 		mmio_debug_resume(uncore->debug);
 
 		if (check_for_unclaimed_mmio(uncore))
-			dev_info(uncore->i915->drm.dev,
+			drm_info(&uncore->i915->drm,
 				 "Invalid mmio detected during user access\n");
 		spin_unlock(&uncore->debug->lock);
 
@@ -734,6 +734,28 @@ void intel_uncore_forcewake_put(struct intel_uncore *uncore,
 	spin_unlock_irqrestore(&uncore->lock, irqflags);
 }
 
+/**
+ * intel_uncore_forcewake_flush - flush the delayed release
+ * @uncore: the intel_uncore structure
+ * @fw_domains: forcewake domains to flush
+ */
+void intel_uncore_forcewake_flush(struct intel_uncore *uncore,
+				  enum forcewake_domains fw_domains)
+{
+	struct intel_uncore_forcewake_domain *domain;
+	unsigned int tmp;
+
+	if (!uncore->funcs.force_wake_put)
+		return;
+
+	fw_domains &= uncore->fw_domains;
+	for_each_fw_domain_masked(domain, fw_domains, uncore, tmp) {
+		WRITE_ONCE(domain->active, false);
+		if (hrtimer_cancel(&domain->timer))
+			intel_uncore_fw_release_timer(&domain->timer);
+	}
+}
+
 /**
  * intel_uncore_forcewake_put__locked - grab forcewake domain references
  * @uncore: the intel_uncore structure
@@ -1070,8 +1092,7 @@ static const struct intel_forcewake_range __gen9_fw_ranges[] = {
 
 /* *Must* be sorted by offset ranges! See intel_fw_table_check(). */
 static const struct intel_forcewake_range __gen11_fw_ranges[] = {
-	GEN_FW_RANGE(0x0, 0xaff, FORCEWAKE_BLITTER),
-	GEN_FW_RANGE(0xb00, 0x1fff, 0), /* uncore range */
+	GEN_FW_RANGE(0x0, 0x1fff, 0), /* uncore range */
 	GEN_FW_RANGE(0x2000, 0x26ff, FORCEWAKE_RENDER),
 	GEN_FW_RANGE(0x2700, 0x2fff, FORCEWAKE_BLITTER),
 	GEN_FW_RANGE(0x3000, 0x3fff, FORCEWAKE_RENDER),
@@ -1081,27 +1102,31 @@ static const struct intel_forcewake_range __gen11_fw_ranges[] = {
 	GEN_FW_RANGE(0x8140, 0x815f, FORCEWAKE_RENDER),
 	GEN_FW_RANGE(0x8160, 0x82ff, FORCEWAKE_BLITTER),
 	GEN_FW_RANGE(0x8300, 0x84ff, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0x8500, 0x8bff, FORCEWAKE_BLITTER),
+	GEN_FW_RANGE(0x8500, 0x87ff, FORCEWAKE_BLITTER),
+	GEN_FW_RANGE(0x8800, 0x8bff, 0),
 	GEN_FW_RANGE(0x8c00, 0x8cff, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0x8d00, 0x93ff, FORCEWAKE_BLITTER),
-	GEN_FW_RANGE(0x9400, 0x97ff, FORCEWAKE_ALL),
-	GEN_FW_RANGE(0x9800, 0xafff, FORCEWAKE_BLITTER),
+	GEN_FW_RANGE(0x8d00, 0x94cf, FORCEWAKE_BLITTER),
+	GEN_FW_RANGE(0x94d0, 0x955f, FORCEWAKE_RENDER),
+	GEN_FW_RANGE(0x9560, 0x95ff, 0),
+	GEN_FW_RANGE(0x9600, 0xafff, FORCEWAKE_BLITTER),
 	GEN_FW_RANGE(0xb000, 0xb47f, FORCEWAKE_RENDER),
 	GEN_FW_RANGE(0xb480, 0xdeff, FORCEWAKE_BLITTER),
 	GEN_FW_RANGE(0xdf00, 0xe8ff, FORCEWAKE_RENDER),
 	GEN_FW_RANGE(0xe900, 0x16dff, FORCEWAKE_BLITTER),
 	GEN_FW_RANGE(0x16e00, 0x19fff, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0x1a000, 0x243ff, FORCEWAKE_BLITTER),
-	GEN_FW_RANGE(0x24400, 0x247ff, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0x24800, 0x3ffff, FORCEWAKE_BLITTER),
+	GEN_FW_RANGE(0x1a000, 0x23fff, FORCEWAKE_BLITTER),
+	GEN_FW_RANGE(0x24000, 0x2407f, 0),
+	GEN_FW_RANGE(0x24080, 0x2417f, FORCEWAKE_BLITTER),
+	GEN_FW_RANGE(0x24180, 0x242ff, FORCEWAKE_RENDER),
+	GEN_FW_RANGE(0x24300, 0x243ff, FORCEWAKE_BLITTER),
+	GEN_FW_RANGE(0x24400, 0x24fff, FORCEWAKE_RENDER),
+	GEN_FW_RANGE(0x25000, 0x3ffff, FORCEWAKE_BLITTER),
 	GEN_FW_RANGE(0x40000, 0x1bffff, 0),
 	GEN_FW_RANGE(0x1c0000, 0x1c3fff, FORCEWAKE_MEDIA_VDBOX0),
-	GEN_FW_RANGE(0x1c4000, 0x1c7fff, FORCEWAKE_MEDIA_VDBOX1),
-	GEN_FW_RANGE(0x1c8000, 0x1cbfff, FORCEWAKE_MEDIA_VEBOX0),
-	GEN_FW_RANGE(0x1cc000, 0x1cffff, FORCEWAKE_BLITTER),
+	GEN_FW_RANGE(0x1c4000, 0x1c7fff, 0),
+	GEN_FW_RANGE(0x1c8000, 0x1cffff, FORCEWAKE_MEDIA_VEBOX0),
 	GEN_FW_RANGE(0x1d0000, 0x1d3fff, FORCEWAKE_MEDIA_VDBOX2),
-	GEN_FW_RANGE(0x1d4000, 0x1d7fff, FORCEWAKE_MEDIA_VDBOX3),
-	GEN_FW_RANGE(0x1d8000, 0x1dbfff, FORCEWAKE_MEDIA_VEBOX1)
+	GEN_FW_RANGE(0x1d4000, 0x1dbfff, 0)
 };
 
 /* *Must* be sorted by offset ranges! See intel_fw_table_check(). */
diff --git a/drivers/gpu/drm/i915/intel_uncore.h b/drivers/gpu/drm/i915/intel_uncore.h
index dcfa243892c6..8d3aa8b9acf9 100644
--- a/drivers/gpu/drm/i915/intel_uncore.h
+++ b/drivers/gpu/drm/i915/intel_uncore.h
@@ -209,7 +209,11 @@ void intel_uncore_forcewake_get(struct intel_uncore *uncore,
 				enum forcewake_domains domains);
 void intel_uncore_forcewake_put(struct intel_uncore *uncore,
 				enum forcewake_domains domains);
-/* Like above but the caller must manage the uncore.lock itself.
+void intel_uncore_forcewake_flush(struct intel_uncore *uncore,
+				  enum forcewake_domains fw_domains);
+
+/*
+ * Like above but the caller must manage the uncore.lock itself.
  * Must be used with I915_READ_FW and friends.
  */
 void intel_uncore_forcewake_get__locked(struct intel_uncore *uncore,
diff --git a/drivers/gpu/drm/i915/intel_wakeref.c b/drivers/gpu/drm/i915/intel_wakeref.c
index 8fbf6f4d3f26..dfd87d082218 100644
--- a/drivers/gpu/drm/i915/intel_wakeref.c
+++ b/drivers/gpu/drm/i915/intel_wakeref.c
@@ -70,11 +70,12 @@ static void ____intel_wakeref_put_last(struct intel_wakeref *wf)
 
 void __intel_wakeref_put_last(struct intel_wakeref *wf, unsigned long flags)
 {
-	INTEL_WAKEREF_BUG_ON(work_pending(&wf->work));
+	INTEL_WAKEREF_BUG_ON(delayed_work_pending(&wf->work));
 
 	/* Assume we are not in process context and so cannot sleep. */
 	if (flags & INTEL_WAKEREF_PUT_ASYNC || !mutex_trylock(&wf->mutex)) {
-		schedule_work(&wf->work);
+		mod_delayed_work(system_wq, &wf->work,
+				 FIELD_GET(INTEL_WAKEREF_PUT_DELAY, flags));
 		return;
 	}
 
@@ -83,7 +84,7 @@ void __intel_wakeref_put_last(struct intel_wakeref *wf, unsigned long flags)
 
 static void __intel_wakeref_put_work(struct work_struct *wrk)
 {
-	struct intel_wakeref *wf = container_of(wrk, typeof(*wf), work);
+	struct intel_wakeref *wf = container_of(wrk, typeof(*wf), work.work);
 
 	if (atomic_add_unless(&wf->count, -1, 1))
 		return;
@@ -104,8 +105,9 @@ void __intel_wakeref_init(struct intel_wakeref *wf,
 	atomic_set(&wf->count, 0);
 	wf->wakeref = 0;
 
-	INIT_WORK(&wf->work, __intel_wakeref_put_work);
-	lockdep_init_map(&wf->work.lockdep_map, "wakeref.work", &key->work, 0);
+	INIT_DELAYED_WORK(&wf->work, __intel_wakeref_put_work);
+	lockdep_init_map(&wf->work.work.lockdep_map,
+			 "wakeref.work", &key->work, 0);
 }
 
 int intel_wakeref_wait_for_idle(struct intel_wakeref *wf)
diff --git a/drivers/gpu/drm/i915/intel_wakeref.h b/drivers/gpu/drm/i915/intel_wakeref.h
index 7d1e676b71ef..545c8f277c46 100644
--- a/drivers/gpu/drm/i915/intel_wakeref.h
+++ b/drivers/gpu/drm/i915/intel_wakeref.h
@@ -8,6 +8,7 @@
 #define INTEL_WAKEREF_H
 
 #include <linux/atomic.h>
+#include <linux/bitfield.h>
 #include <linux/bits.h>
 #include <linux/lockdep.h>
 #include <linux/mutex.h>
@@ -41,7 +42,7 @@ struct intel_wakeref {
 	struct intel_runtime_pm *rpm;
 	const struct intel_wakeref_ops *ops;
 
-	struct work_struct work;
+	struct delayed_work work;
 };
 
 struct intel_wakeref_lockclass {
@@ -117,6 +118,11 @@ intel_wakeref_get_if_active(struct intel_wakeref *wf)
 	return atomic_inc_not_zero(&wf->count);
 }
 
+enum {
+	INTEL_WAKEREF_PUT_ASYNC_BIT = 0,
+	__INTEL_WAKEREF_PUT_LAST_BIT__
+};
+
 /**
  * intel_wakeref_put_flags: Release the wakeref
  * @wf: the wakeref
@@ -134,7 +140,9 @@ intel_wakeref_get_if_active(struct intel_wakeref *wf)
  */
 static inline void
 __intel_wakeref_put(struct intel_wakeref *wf, unsigned long flags)
-#define INTEL_WAKEREF_PUT_ASYNC BIT(0)
+#define INTEL_WAKEREF_PUT_ASYNC BIT(INTEL_WAKEREF_PUT_ASYNC_BIT)
+#define INTEL_WAKEREF_PUT_DELAY \
+	GENMASK(BITS_PER_LONG - 1, __INTEL_WAKEREF_PUT_LAST_BIT__)
 {
 	INTEL_WAKEREF_BUG_ON(atomic_read(&wf->count) <= 0);
 	if (unlikely(!atomic_add_unless(&wf->count, -1, 1)))
@@ -154,6 +162,14 @@ intel_wakeref_put_async(struct intel_wakeref *wf)
 	__intel_wakeref_put(wf, INTEL_WAKEREF_PUT_ASYNC);
 }
 
+static inline void
+intel_wakeref_put_delay(struct intel_wakeref *wf, unsigned long delay)
+{
+	__intel_wakeref_put(wf,
+			    INTEL_WAKEREF_PUT_ASYNC |
+			    FIELD_PREP(INTEL_WAKEREF_PUT_DELAY, delay));
+}
+
 /**
  * intel_wakeref_lock: Lock the wakeref (mutex)
  * @wf: the wakeref
@@ -194,7 +210,7 @@ intel_wakeref_unlock_wait(struct intel_wakeref *wf)
 {
 	mutex_lock(&wf->mutex);
 	mutex_unlock(&wf->mutex);
-	flush_work(&wf->work);
+	flush_delayed_work(&wf->work);
 }
 
 /**
diff --git a/drivers/gpu/drm/i915/intel_wopcm.c b/drivers/gpu/drm/i915/intel_wopcm.c
index 2bb9f9f9a50a..6942487c14a9 100644
--- a/drivers/gpu/drm/i915/intel_wopcm.c
+++ b/drivers/gpu/drm/i915/intel_wopcm.c
@@ -86,10 +86,10 @@ void intel_wopcm_init_early(struct intel_wopcm *wopcm)
 	else
 		wopcm->size = GEN9_WOPCM_SIZE;
 
-	DRM_DEV_DEBUG_DRIVER(i915->drm.dev, "WOPCM: %uK\n", wopcm->size / 1024);
+	drm_dbg(&i915->drm, "WOPCM: %uK\n", wopcm->size / 1024);
 }
 
-static inline u32 context_reserved_size(struct drm_i915_private *i915)
+static u32 context_reserved_size(struct drm_i915_private *i915)
 {
 	if (IS_GEN9_LP(i915))
 		return BXT_WOPCM_RC6_CTX_RESERVED;
@@ -99,8 +99,8 @@ static inline u32 context_reserved_size(struct drm_i915_private *i915)
 		return 0;
 }
 
-static inline bool gen9_check_dword_gap(struct drm_i915_private *i915,
-					u32 guc_wopcm_base, u32 guc_wopcm_size)
+static bool gen9_check_dword_gap(struct drm_i915_private *i915,
+				 u32 guc_wopcm_base, u32 guc_wopcm_size)
 {
 	u32 offset;
 
@@ -112,7 +112,7 @@ static inline bool gen9_check_dword_gap(struct drm_i915_private *i915,
 	offset = guc_wopcm_base + GEN9_GUC_WOPCM_OFFSET;
 	if (offset > guc_wopcm_size ||
 	    (guc_wopcm_size - offset) < sizeof(u32)) {
-		dev_err(i915->drm.dev,
+		drm_err(&i915->drm,
 			"WOPCM: invalid GuC region size: %uK < %uK\n",
 			guc_wopcm_size / SZ_1K,
 			(u32)(offset + sizeof(u32)) / SZ_1K);
@@ -122,8 +122,8 @@ static inline bool gen9_check_dword_gap(struct drm_i915_private *i915,
 	return true;
 }
 
-static inline bool gen9_check_huc_fw_fits(struct drm_i915_private *i915,
-					  u32 guc_wopcm_size, u32 huc_fw_size)
+static bool gen9_check_huc_fw_fits(struct drm_i915_private *i915,
+				   u32 guc_wopcm_size, u32 huc_fw_size)
 {
 	/*
 	 * On Gen9 & CNL A0, hardware requires the total available GuC WOPCM
@@ -131,7 +131,7 @@ static inline bool gen9_check_huc_fw_fits(struct drm_i915_private *i915,
 	 * firmware uploading would fail.
 	 */
 	if (huc_fw_size > guc_wopcm_size - GUC_WOPCM_RESERVED) {
-		dev_err(i915->drm.dev, "WOPCM: no space for %s: %uK < %uK\n",
+		drm_err(&i915->drm, "WOPCM: no space for %s: %uK < %uK\n",
 			intel_uc_fw_type_repr(INTEL_UC_FW_TYPE_HUC),
 			(guc_wopcm_size - GUC_WOPCM_RESERVED) / SZ_1K,
 			huc_fw_size / 1024);
@@ -141,9 +141,9 @@ static inline bool gen9_check_huc_fw_fits(struct drm_i915_private *i915,
 	return true;
 }
 
-static inline bool check_hw_restrictions(struct drm_i915_private *i915,
-					 u32 guc_wopcm_base, u32 guc_wopcm_size,
-					 u32 huc_fw_size)
+static bool check_hw_restrictions(struct drm_i915_private *i915,
+				  u32 guc_wopcm_base, u32 guc_wopcm_size,
+				  u32 huc_fw_size)
 {
 	if (IS_GEN(i915, 9) && !gen9_check_dword_gap(i915, guc_wopcm_base,
 						     guc_wopcm_size))
@@ -157,16 +157,16 @@ static inline bool check_hw_restrictions(struct drm_i915_private *i915,
 	return true;
 }
 
-static inline bool __check_layout(struct drm_i915_private *i915, u32 wopcm_size,
-				  u32 guc_wopcm_base, u32 guc_wopcm_size,
-				  u32 guc_fw_size, u32 huc_fw_size)
+static bool __check_layout(struct drm_i915_private *i915, u32 wopcm_size,
+			   u32 guc_wopcm_base, u32 guc_wopcm_size,
+			   u32 guc_fw_size, u32 huc_fw_size)
 {
 	const u32 ctx_rsvd = context_reserved_size(i915);
 	u32 size;
 
 	size = wopcm_size - ctx_rsvd;
 	if (unlikely(range_overflows(guc_wopcm_base, guc_wopcm_size, size))) {
-		dev_err(i915->drm.dev,
+		drm_err(&i915->drm,
 			"WOPCM: invalid GuC region layout: %uK + %uK > %uK\n",
 			guc_wopcm_base / SZ_1K, guc_wopcm_size / SZ_1K,
 			size / SZ_1K);
@@ -175,7 +175,7 @@ static inline bool __check_layout(struct drm_i915_private *i915, u32 wopcm_size,
 
 	size = guc_fw_size + GUC_WOPCM_RESERVED + GUC_WOPCM_STACK_RESERVED;
 	if (unlikely(guc_wopcm_size < size)) {
-		dev_err(i915->drm.dev, "WOPCM: no space for %s: %uK < %uK\n",
+		drm_err(&i915->drm, "WOPCM: no space for %s: %uK < %uK\n",
 			intel_uc_fw_type_repr(INTEL_UC_FW_TYPE_GUC),
 			guc_wopcm_size / SZ_1K, size / SZ_1K);
 		return false;
@@ -183,7 +183,7 @@ static inline bool __check_layout(struct drm_i915_private *i915, u32 wopcm_size,
 
 	size = huc_fw_size + WOPCM_RESERVED_SIZE;
 	if (unlikely(guc_wopcm_base < size)) {
-		dev_err(i915->drm.dev, "WOPCM: no space for %s: %uK < %uK\n",
+		drm_err(&i915->drm, "WOPCM: no space for %s: %uK < %uK\n",
 			intel_uc_fw_type_repr(INTEL_UC_FW_TYPE_HUC),
 			guc_wopcm_base / SZ_1K, size / SZ_1K);
 		return false;
@@ -242,10 +242,8 @@ void intel_wopcm_init(struct intel_wopcm *wopcm)
 		return;
 
 	if (__wopcm_regs_locked(gt->uncore, &guc_wopcm_base, &guc_wopcm_size)) {
-		DRM_DEV_DEBUG_DRIVER(i915->drm.dev,
-				     "GuC WOPCM is already locked [%uK, %uK)\n",
-				     guc_wopcm_base / SZ_1K,
-				     guc_wopcm_size / SZ_1K);
+		drm_dbg(&i915->drm, "GuC WOPCM is already locked [%uK, %uK)\n",
+			guc_wopcm_base / SZ_1K, guc_wopcm_size / SZ_1K);
 		goto check;
 	}
 
@@ -266,8 +264,8 @@ void intel_wopcm_init(struct intel_wopcm *wopcm)
 	guc_wopcm_size = wopcm->size - ctx_rsvd - guc_wopcm_base;
 	guc_wopcm_size &= GUC_WOPCM_SIZE_MASK;
 
-	DRM_DEV_DEBUG_DRIVER(i915->drm.dev, "Calculated GuC WOPCM [%uK, %uK)\n",
-			     guc_wopcm_base / SZ_1K, guc_wopcm_size / SZ_1K);
+	drm_dbg(&i915->drm, "Calculated GuC WOPCM [%uK, %uK)\n",
+		guc_wopcm_base / SZ_1K, guc_wopcm_size / SZ_1K);
 
 check:
 	if (__check_layout(i915, wopcm->size, guc_wopcm_base, guc_wopcm_size,
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_bdw.c b/drivers/gpu/drm/i915/oa/i915_oa_bdw.c
deleted file mode 100644
index 14da5c3b569d..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_bdw.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_bdw.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x000000a0 },
-	{ _MMIO(0x9888), 0x198b0000 },
-	{ _MMIO(0x9888), 0x078b0066 },
-	{ _MMIO(0x9888), 0x118b0000 },
-	{ _MMIO(0x9888), 0x258b0000 },
-	{ _MMIO(0x9888), 0x21850008 },
-	{ _MMIO(0x9888), 0x0d834000 },
-	{ _MMIO(0x9888), 0x07844000 },
-	{ _MMIO(0x9888), 0x17804000 },
-	{ _MMIO(0x9888), 0x21800000 },
-	{ _MMIO(0x9888), 0x4f800000 },
-	{ _MMIO(0x9888), 0x41800000 },
-	{ _MMIO(0x9888), 0x31800000 },
-	{ _MMIO(0x9840), 0x00000080 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_bdw(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"d6de6f55-e526-4f79-a6a6-d7315c09044e",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "d6de6f55-e526-4f79-a6a6-d7315c09044e";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_bdw.h b/drivers/gpu/drm/i915/oa/i915_oa_bdw.h
deleted file mode 100644
index 0cee3334f0a6..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_bdw.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_BDW_H__
-#define __I915_OA_BDW_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_bdw(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_bxt.c b/drivers/gpu/drm/i915/oa/i915_oa_bxt.c
deleted file mode 100644
index 3e785bafcf99..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_bxt.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_bxt.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x9888), 0x19800000 },
-	{ _MMIO(0x9888), 0x07800063 },
-	{ _MMIO(0x9888), 0x11800000 },
-	{ _MMIO(0x9888), 0x23810008 },
-	{ _MMIO(0x9888), 0x1d950400 },
-	{ _MMIO(0x9888), 0x0f922000 },
-	{ _MMIO(0x9888), 0x1f908000 },
-	{ _MMIO(0x9888), 0x37900000 },
-	{ _MMIO(0x9888), 0x55900000 },
-	{ _MMIO(0x9888), 0x47900000 },
-	{ _MMIO(0x9888), 0x33900000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_bxt(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"5ee72f5c-092f-421e-8b70-225f7c3e9612",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "5ee72f5c-092f-421e-8b70-225f7c3e9612";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_bxt.h b/drivers/gpu/drm/i915/oa/i915_oa_bxt.h
deleted file mode 100644
index 0bdf391323ec..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_bxt.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_BXT_H__
-#define __I915_OA_BXT_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_bxt(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_cflgt2.c b/drivers/gpu/drm/i915/oa/i915_oa_cflgt2.c
deleted file mode 100644
index 0ea86f70a06c..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_cflgt2.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_cflgt2.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x9888), 0x11810000 },
-	{ _MMIO(0x9888), 0x07810013 },
-	{ _MMIO(0x9888), 0x1f810000 },
-	{ _MMIO(0x9888), 0x1d810000 },
-	{ _MMIO(0x9888), 0x1b930040 },
-	{ _MMIO(0x9888), 0x07e54000 },
-	{ _MMIO(0x9888), 0x1f908000 },
-	{ _MMIO(0x9888), 0x11900000 },
-	{ _MMIO(0x9888), 0x37900000 },
-	{ _MMIO(0x9888), 0x53900000 },
-	{ _MMIO(0x9888), 0x45900000 },
-	{ _MMIO(0x9888), 0x33900000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_cflgt2(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"74fb4902-d3d3-4237-9e90-cbdc68d0a446",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "74fb4902-d3d3-4237-9e90-cbdc68d0a446";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_cflgt2.h b/drivers/gpu/drm/i915/oa/i915_oa_cflgt2.h
deleted file mode 100644
index 6b862280ab78..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_cflgt2.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_CFLGT2_H__
-#define __I915_OA_CFLGT2_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_cflgt2(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_cflgt3.c b/drivers/gpu/drm/i915/oa/i915_oa_cflgt3.c
deleted file mode 100644
index fc632dd890bf..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_cflgt3.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_cflgt3.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x9888), 0x11810000 },
-	{ _MMIO(0x9888), 0x07810013 },
-	{ _MMIO(0x9888), 0x1f810000 },
-	{ _MMIO(0x9888), 0x1d810000 },
-	{ _MMIO(0x9888), 0x1b930040 },
-	{ _MMIO(0x9888), 0x07e54000 },
-	{ _MMIO(0x9888), 0x1f908000 },
-	{ _MMIO(0x9888), 0x11900000 },
-	{ _MMIO(0x9888), 0x37900000 },
-	{ _MMIO(0x9888), 0x53900000 },
-	{ _MMIO(0x9888), 0x45900000 },
-	{ _MMIO(0x9888), 0x33900000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_cflgt3(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"577e8e2c-3fa0-4875-8743-3538d585e3b0",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "577e8e2c-3fa0-4875-8743-3538d585e3b0";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_cflgt3.h b/drivers/gpu/drm/i915/oa/i915_oa_cflgt3.h
deleted file mode 100644
index 4ca9d8f89b2f..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_cflgt3.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_CFLGT3_H__
-#define __I915_OA_CFLGT3_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_cflgt3(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_chv.c b/drivers/gpu/drm/i915/oa/i915_oa_chv.c
deleted file mode 100644
index 6cd4e9921a8a..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_chv.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_chv.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x000000a0 },
-	{ _MMIO(0x9888), 0x59800000 },
-	{ _MMIO(0x9888), 0x59800001 },
-	{ _MMIO(0x9888), 0x338b0000 },
-	{ _MMIO(0x9888), 0x258b0066 },
-	{ _MMIO(0x9888), 0x058b0000 },
-	{ _MMIO(0x9888), 0x038b0000 },
-	{ _MMIO(0x9888), 0x03844000 },
-	{ _MMIO(0x9888), 0x47800080 },
-	{ _MMIO(0x9888), 0x57800000 },
-	{ _MMIO(0x1823a4), 0x00000000 },
-	{ _MMIO(0x9888), 0x59800000 },
-	{ _MMIO(0x9840), 0x00000080 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_chv(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"4a534b07-cba3-414d-8d60-874830e883aa",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "4a534b07-cba3-414d-8d60-874830e883aa";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_chv.h b/drivers/gpu/drm/i915/oa/i915_oa_chv.h
deleted file mode 100644
index 3cac7bbc9c71..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_chv.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_CHV_H__
-#define __I915_OA_CHV_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_chv(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_cnl.c b/drivers/gpu/drm/i915/oa/i915_oa_cnl.c
deleted file mode 100644
index 1041e8914993..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_cnl.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_cnl.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x0000ffff },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x0000ffff },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x0000ffff },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0xd04), 0x00000200 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x17060000 },
-	{ _MMIO(0x9840), 0x00000000 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x13034000 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x07060066 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x05060000 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x0f080040 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x07091000 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x0f041000 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x1d004000 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x35000000 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x49000000 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x3d000000 },
-	{ _MMIO(0x9884), 0x00000007 },
-	{ _MMIO(0x9888), 0x31000000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_cnl(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"db41edd4-d8e7-4730-ad11-b9a2d6833503",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "db41edd4-d8e7-4730-ad11-b9a2d6833503";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_cnl.h b/drivers/gpu/drm/i915/oa/i915_oa_cnl.h
deleted file mode 100644
index db379f5fcbb9..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_cnl.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_CNL_H__
-#define __I915_OA_CNL_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_cnl(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_glk.c b/drivers/gpu/drm/i915/oa/i915_oa_glk.c
deleted file mode 100644
index bd15ebe9aeeb..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_glk.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_glk.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x9888), 0x19800000 },
-	{ _MMIO(0x9888), 0x07800063 },
-	{ _MMIO(0x9888), 0x11800000 },
-	{ _MMIO(0x9888), 0x23810008 },
-	{ _MMIO(0x9888), 0x1d950400 },
-	{ _MMIO(0x9888), 0x0f922000 },
-	{ _MMIO(0x9888), 0x1f908000 },
-	{ _MMIO(0x9888), 0x37900000 },
-	{ _MMIO(0x9888), 0x55900000 },
-	{ _MMIO(0x9888), 0x47900000 },
-	{ _MMIO(0x9888), 0x33900000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_glk(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"dd3fd789-e783-4204-8cd0-b671bbccb0cf",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "dd3fd789-e783-4204-8cd0-b671bbccb0cf";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_glk.h b/drivers/gpu/drm/i915/oa/i915_oa_glk.h
deleted file mode 100644
index 779f343efd11..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_glk.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_GLK_H__
-#define __I915_OA_GLK_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_glk(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_hsw.c b/drivers/gpu/drm/i915/oa/i915_oa_hsw.c
deleted file mode 100644
index 133721a8619f..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_hsw.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_hsw.h"
-
-static const struct i915_oa_reg b_counter_config_render_basic[] = {
-	{ _MMIO(0x2724), 0x00800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2714), 0x00800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-};
-
-static const struct i915_oa_reg flex_eu_config_render_basic[] = {
-};
-
-static const struct i915_oa_reg mux_config_render_basic[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x253a4), 0x01600000 },
-	{ _MMIO(0x25440), 0x00100000 },
-	{ _MMIO(0x25128), 0x00000000 },
-	{ _MMIO(0x2691c), 0x00000800 },
-	{ _MMIO(0x26aa0), 0x01500000 },
-	{ _MMIO(0x26b9c), 0x00006000 },
-	{ _MMIO(0x2791c), 0x00000800 },
-	{ _MMIO(0x27aa0), 0x01500000 },
-	{ _MMIO(0x27b9c), 0x00006000 },
-	{ _MMIO(0x2641c), 0x00000400 },
-	{ _MMIO(0x25380), 0x00000010 },
-	{ _MMIO(0x2538c), 0x00000000 },
-	{ _MMIO(0x25384), 0x0800aaaa },
-	{ _MMIO(0x25400), 0x00000004 },
-	{ _MMIO(0x2540c), 0x06029000 },
-	{ _MMIO(0x25410), 0x00000002 },
-	{ _MMIO(0x25404), 0x5c30ffff },
-	{ _MMIO(0x25100), 0x00000016 },
-	{ _MMIO(0x25110), 0x00000400 },
-	{ _MMIO(0x25104), 0x00000000 },
-	{ _MMIO(0x26804), 0x00001211 },
-	{ _MMIO(0x26884), 0x00000100 },
-	{ _MMIO(0x26900), 0x00000002 },
-	{ _MMIO(0x26908), 0x00700000 },
-	{ _MMIO(0x26904), 0x00000000 },
-	{ _MMIO(0x26984), 0x00001022 },
-	{ _MMIO(0x26a04), 0x00000011 },
-	{ _MMIO(0x26a80), 0x00000006 },
-	{ _MMIO(0x26a88), 0x00000c02 },
-	{ _MMIO(0x26a84), 0x00000000 },
-	{ _MMIO(0x26b04), 0x00001000 },
-	{ _MMIO(0x26b80), 0x00000002 },
-	{ _MMIO(0x26b8c), 0x00000007 },
-	{ _MMIO(0x26b84), 0x00000000 },
-	{ _MMIO(0x27804), 0x00004844 },
-	{ _MMIO(0x27884), 0x00000400 },
-	{ _MMIO(0x27900), 0x00000002 },
-	{ _MMIO(0x27908), 0x0e000000 },
-	{ _MMIO(0x27904), 0x00000000 },
-	{ _MMIO(0x27984), 0x00004088 },
-	{ _MMIO(0x27a04), 0x00000044 },
-	{ _MMIO(0x27a80), 0x00000006 },
-	{ _MMIO(0x27a88), 0x00018040 },
-	{ _MMIO(0x27a84), 0x00000000 },
-	{ _MMIO(0x27b04), 0x00004000 },
-	{ _MMIO(0x27b80), 0x00000002 },
-	{ _MMIO(0x27b8c), 0x000000e0 },
-	{ _MMIO(0x27b84), 0x00000000 },
-	{ _MMIO(0x26104), 0x00002222 },
-	{ _MMIO(0x26184), 0x0c006666 },
-	{ _MMIO(0x26284), 0x04000000 },
-	{ _MMIO(0x26304), 0x04000000 },
-	{ _MMIO(0x26400), 0x00000002 },
-	{ _MMIO(0x26410), 0x000000a0 },
-	{ _MMIO(0x26404), 0x00000000 },
-	{ _MMIO(0x25420), 0x04108020 },
-	{ _MMIO(0x25424), 0x1284a420 },
-	{ _MMIO(0x2541c), 0x00000000 },
-	{ _MMIO(0x25428), 0x00042049 },
-};
-
-static ssize_t
-show_render_basic_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_hsw(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"403d8832-1a27-4aa6-a64e-f5389ce7b212",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_render_basic;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_render_basic);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_render_basic;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_render_basic);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_render_basic;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_render_basic);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "403d8832-1a27-4aa6-a64e-f5389ce7b212";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_render_basic_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_hsw.h b/drivers/gpu/drm/i915/oa/i915_oa_hsw.h
deleted file mode 100644
index ba97f732f136..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_hsw.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_HSW_H__
-#define __I915_OA_HSW_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_hsw(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_icl.c b/drivers/gpu/drm/i915/oa/i915_oa_icl.c
deleted file mode 100644
index 2d92041b754f..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_icl.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_icl.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x0000ffff },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x0000ffff },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x0000ffff },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0xd04), 0x00000200 },
-	{ _MMIO(0x9840), 0x00000000 },
-	{ _MMIO(0x9884), 0x00000000 },
-	{ _MMIO(0x9888), 0x10060000 },
-	{ _MMIO(0x9888), 0x22060000 },
-	{ _MMIO(0x9888), 0x16060000 },
-	{ _MMIO(0x9888), 0x24060000 },
-	{ _MMIO(0x9888), 0x18060000 },
-	{ _MMIO(0x9888), 0x1a060000 },
-	{ _MMIO(0x9888), 0x12060000 },
-	{ _MMIO(0x9888), 0x14060000 },
-	{ _MMIO(0x9888), 0x10060000 },
-	{ _MMIO(0x9888), 0x22060000 },
-	{ _MMIO(0x9884), 0x00000003 },
-	{ _MMIO(0x9888), 0x16130000 },
-	{ _MMIO(0x9888), 0x24000001 },
-	{ _MMIO(0x9888), 0x0e130056 },
-	{ _MMIO(0x9888), 0x10130000 },
-	{ _MMIO(0x9888), 0x1a130000 },
-	{ _MMIO(0x9888), 0x541f0001 },
-	{ _MMIO(0x9888), 0x181f0000 },
-	{ _MMIO(0x9888), 0x4c1f0000 },
-	{ _MMIO(0x9888), 0x301f0000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_icl(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"a291665e-244b-4b76-9b9a-01de9d3c8068",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "a291665e-244b-4b76-9b9a-01de9d3c8068";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_icl.h b/drivers/gpu/drm/i915/oa/i915_oa_icl.h
deleted file mode 100644
index 5c64112d720e..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_icl.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_ICL_H__
-#define __I915_OA_ICL_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_icl(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_kblgt2.c b/drivers/gpu/drm/i915/oa/i915_oa_kblgt2.c
deleted file mode 100644
index 1c3a67c9cfe0..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_kblgt2.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_kblgt2.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x9888), 0x11810000 },
-	{ _MMIO(0x9888), 0x07810013 },
-	{ _MMIO(0x9888), 0x1f810000 },
-	{ _MMIO(0x9888), 0x1d810000 },
-	{ _MMIO(0x9888), 0x1b930040 },
-	{ _MMIO(0x9888), 0x07e54000 },
-	{ _MMIO(0x9888), 0x1f908000 },
-	{ _MMIO(0x9888), 0x11900000 },
-	{ _MMIO(0x9888), 0x37900000 },
-	{ _MMIO(0x9888), 0x53900000 },
-	{ _MMIO(0x9888), 0x45900000 },
-	{ _MMIO(0x9888), 0x33900000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_kblgt2(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"baa3c7e4-52b6-4b85-801e-465a94b746dd",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "baa3c7e4-52b6-4b85-801e-465a94b746dd";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_kblgt2.h b/drivers/gpu/drm/i915/oa/i915_oa_kblgt2.h
deleted file mode 100644
index 810532fa6b63..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_kblgt2.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_KBLGT2_H__
-#define __I915_OA_KBLGT2_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_kblgt2(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_kblgt3.c b/drivers/gpu/drm/i915/oa/i915_oa_kblgt3.c
deleted file mode 100644
index ebbe5a9c9fdc..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_kblgt3.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_kblgt3.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x9888), 0x11810000 },
-	{ _MMIO(0x9888), 0x07810013 },
-	{ _MMIO(0x9888), 0x1f810000 },
-	{ _MMIO(0x9888), 0x1d810000 },
-	{ _MMIO(0x9888), 0x1b930040 },
-	{ _MMIO(0x9888), 0x07e54000 },
-	{ _MMIO(0x9888), 0x1f908000 },
-	{ _MMIO(0x9888), 0x11900000 },
-	{ _MMIO(0x9888), 0x37900000 },
-	{ _MMIO(0x9888), 0x53900000 },
-	{ _MMIO(0x9888), 0x45900000 },
-	{ _MMIO(0x9888), 0x33900000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_kblgt3(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"f1792f32-6db2-4b50-b4b2-557128f1688d",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "f1792f32-6db2-4b50-b4b2-557128f1688d";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_kblgt3.h b/drivers/gpu/drm/i915/oa/i915_oa_kblgt3.h
deleted file mode 100644
index 13d70456fabd..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_kblgt3.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_KBLGT3_H__
-#define __I915_OA_KBLGT3_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_kblgt3(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_sklgt2.c b/drivers/gpu/drm/i915/oa/i915_oa_sklgt2.c
deleted file mode 100644
index 1bc359ed34e8..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_sklgt2.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_sklgt2.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x9888), 0x11810000 },
-	{ _MMIO(0x9888), 0x07810016 },
-	{ _MMIO(0x9888), 0x1f810000 },
-	{ _MMIO(0x9888), 0x1d810000 },
-	{ _MMIO(0x9888), 0x1b930040 },
-	{ _MMIO(0x9888), 0x07e54000 },
-	{ _MMIO(0x9888), 0x1f908000 },
-	{ _MMIO(0x9888), 0x11900000 },
-	{ _MMIO(0x9888), 0x37900000 },
-	{ _MMIO(0x9888), 0x53900000 },
-	{ _MMIO(0x9888), 0x45900000 },
-	{ _MMIO(0x9888), 0x33900000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_sklgt2(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"1651949f-0ac0-4cb1-a06f-dafd74a407d1",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "1651949f-0ac0-4cb1-a06f-dafd74a407d1";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_sklgt2.h b/drivers/gpu/drm/i915/oa/i915_oa_sklgt2.h
deleted file mode 100644
index fda70c51a6ec..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_sklgt2.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_SKLGT2_H__
-#define __I915_OA_SKLGT2_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_sklgt2(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_sklgt3.c b/drivers/gpu/drm/i915/oa/i915_oa_sklgt3.c
deleted file mode 100644
index 6e352f881310..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_sklgt3.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_sklgt3.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x9888), 0x11810000 },
-	{ _MMIO(0x9888), 0x07810013 },
-	{ _MMIO(0x9888), 0x1f810000 },
-	{ _MMIO(0x9888), 0x1d810000 },
-	{ _MMIO(0x9888), 0x1b930040 },
-	{ _MMIO(0x9888), 0x07e54000 },
-	{ _MMIO(0x9888), 0x1f908000 },
-	{ _MMIO(0x9888), 0x11900000 },
-	{ _MMIO(0x9888), 0x37900000 },
-	{ _MMIO(0x9888), 0x53900000 },
-	{ _MMIO(0x9888), 0x45900000 },
-	{ _MMIO(0x9888), 0x33900000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_sklgt3(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"2b985803-d3c9-4629-8a4f-634bfecba0e8",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "2b985803-d3c9-4629-8a4f-634bfecba0e8";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_sklgt3.h b/drivers/gpu/drm/i915/oa/i915_oa_sklgt3.h
deleted file mode 100644
index df74eba5799e..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_sklgt3.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_SKLGT3_H__
-#define __I915_OA_SKLGT3_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_sklgt3(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_sklgt4.c b/drivers/gpu/drm/i915/oa/i915_oa_sklgt4.c
deleted file mode 100644
index 8f345115a306..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_sklgt4.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_sklgt4.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0x2740), 0x00000000 },
-	{ _MMIO(0x2744), 0x00800000 },
-	{ _MMIO(0x2714), 0xf0800000 },
-	{ _MMIO(0x2710), 0x00000000 },
-	{ _MMIO(0x2724), 0xf0800000 },
-	{ _MMIO(0x2720), 0x00000000 },
-	{ _MMIO(0x2770), 0x00000004 },
-	{ _MMIO(0x2774), 0x00000000 },
-	{ _MMIO(0x2778), 0x00000003 },
-	{ _MMIO(0x277c), 0x00000000 },
-	{ _MMIO(0x2780), 0x00000007 },
-	{ _MMIO(0x2784), 0x00000000 },
-	{ _MMIO(0x2788), 0x00100002 },
-	{ _MMIO(0x278c), 0x0000fff7 },
-	{ _MMIO(0x2790), 0x00100002 },
-	{ _MMIO(0x2794), 0x0000ffcf },
-	{ _MMIO(0x2798), 0x00100082 },
-	{ _MMIO(0x279c), 0x0000ffef },
-	{ _MMIO(0x27a0), 0x001000c2 },
-	{ _MMIO(0x27a4), 0x0000ffe7 },
-	{ _MMIO(0x27a8), 0x00100001 },
-	{ _MMIO(0x27ac), 0x0000ffe7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x9840), 0x00000080 },
-	{ _MMIO(0x9888), 0x11810000 },
-	{ _MMIO(0x9888), 0x07810013 },
-	{ _MMIO(0x9888), 0x1f810000 },
-	{ _MMIO(0x9888), 0x1d810000 },
-	{ _MMIO(0x9888), 0x1b930040 },
-	{ _MMIO(0x9888), 0x07e54000 },
-	{ _MMIO(0x9888), 0x1f908000 },
-	{ _MMIO(0x9888), 0x11900000 },
-	{ _MMIO(0x9888), 0x37900000 },
-	{ _MMIO(0x9888), 0x53900000 },
-	{ _MMIO(0x9888), 0x45900000 },
-	{ _MMIO(0x9888), 0x33900000 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_sklgt4(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"882fa433-1f4a-4a67-a962-c741888fe5f5",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "882fa433-1f4a-4a67-a962-c741888fe5f5";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_sklgt4.h b/drivers/gpu/drm/i915/oa/i915_oa_sklgt4.h
deleted file mode 100644
index 378ab7ab78d5..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_sklgt4.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018-2019 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_SKLGT4_H__
-#define __I915_OA_SKLGT4_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_sklgt4(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_tgl.c b/drivers/gpu/drm/i915/oa/i915_oa_tgl.c
deleted file mode 100644
index a29d93707345..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_tgl.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#include <linux/sysfs.h>
-
-#include "i915_drv.h"
-#include "i915_oa_tgl.h"
-
-static const struct i915_oa_reg b_counter_config_test_oa[] = {
-	{ _MMIO(0xD920), 0x00000000 },
-	{ _MMIO(0xD900), 0x00000000 },
-	{ _MMIO(0xD904), 0xF0800000 },
-	{ _MMIO(0xD910), 0x00000000 },
-	{ _MMIO(0xD914), 0xF0800000 },
-	{ _MMIO(0xDC40), 0x00FF0000 },
-	{ _MMIO(0xD940), 0x00000004 },
-	{ _MMIO(0xD944), 0x0000FFFF },
-	{ _MMIO(0xDC00), 0x00000004 },
-	{ _MMIO(0xDC04), 0x0000FFFF },
-	{ _MMIO(0xD948), 0x00000003 },
-	{ _MMIO(0xD94C), 0x0000FFFF },
-	{ _MMIO(0xDC08), 0x00000003 },
-	{ _MMIO(0xDC0C), 0x0000FFFF },
-	{ _MMIO(0xD950), 0x00000007 },
-	{ _MMIO(0xD954), 0x0000FFFF },
-	{ _MMIO(0xDC10), 0x00000007 },
-	{ _MMIO(0xDC14), 0x0000FFFF },
-	{ _MMIO(0xD958), 0x00100002 },
-	{ _MMIO(0xD95C), 0x0000FFF7 },
-	{ _MMIO(0xDC18), 0x00100002 },
-	{ _MMIO(0xDC1C), 0x0000FFF7 },
-	{ _MMIO(0xD960), 0x00100002 },
-	{ _MMIO(0xD964), 0x0000FFCF },
-	{ _MMIO(0xDC20), 0x00100002 },
-	{ _MMIO(0xDC24), 0x0000FFCF },
-	{ _MMIO(0xD968), 0x00100082 },
-	{ _MMIO(0xD96C), 0x0000FFEF },
-	{ _MMIO(0xDC28), 0x00100082 },
-	{ _MMIO(0xDC2C), 0x0000FFEF },
-	{ _MMIO(0xD970), 0x001000C2 },
-	{ _MMIO(0xD974), 0x0000FFE7 },
-	{ _MMIO(0xDC30), 0x001000C2 },
-	{ _MMIO(0xDC34), 0x0000FFE7 },
-	{ _MMIO(0xD978), 0x00100001 },
-	{ _MMIO(0xD97C), 0x0000FFE7 },
-	{ _MMIO(0xDC38), 0x00100001 },
-	{ _MMIO(0xDC3C), 0x0000FFE7 },
-};
-
-static const struct i915_oa_reg flex_eu_config_test_oa[] = {
-};
-
-static const struct i915_oa_reg mux_config_test_oa[] = {
-	{ _MMIO(0x0D04), 0x00000200 },
-	{ _MMIO(0x9840), 0x00000000 },
-	{ _MMIO(0x9884), 0x00000000 },
-	{ _MMIO(0x9888), 0x280E0000 },
-	{ _MMIO(0x9888), 0x1E0E0147 },
-	{ _MMIO(0x9888), 0x180E0000 },
-	{ _MMIO(0x9888), 0x160E0000 },
-	{ _MMIO(0x9888), 0x1E0F1000 },
-	{ _MMIO(0x9888), 0x1E104000 },
-	{ _MMIO(0x9888), 0x2E020100 },
-	{ _MMIO(0x9888), 0x2C030004 },
-	{ _MMIO(0x9888), 0x38003000 },
-	{ _MMIO(0x9888), 0x1E0A8000 },
-	{ _MMIO(0x9884), 0x00000003 },
-	{ _MMIO(0x9888), 0x49110000 },
-	{ _MMIO(0x9888), 0x5D101400 },
-	{ _MMIO(0x9888), 0x1D140020 },
-	{ _MMIO(0x9888), 0x1D1103A3 },
-	{ _MMIO(0x9888), 0x01110000 },
-	{ _MMIO(0x9888), 0x61111000 },
-	{ _MMIO(0x9888), 0x1F128000 },
-	{ _MMIO(0x9888), 0x17100000 },
-	{ _MMIO(0x9888), 0x55100630 },
-	{ _MMIO(0x9888), 0x57100000 },
-	{ _MMIO(0x9888), 0x31100000 },
-	{ _MMIO(0x9884), 0x00000003 },
-	{ _MMIO(0x9888), 0x65100002 },
-	{ _MMIO(0x9884), 0x00000000 },
-	{ _MMIO(0x9888), 0x42000001 },
-};
-
-static ssize_t
-show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "1\n");
-}
-
-void
-i915_perf_load_test_config_tgl(struct drm_i915_private *dev_priv)
-{
-	strlcpy(dev_priv->perf.test_config.uuid,
-		"80a833f0-2504-4321-8894-e9277844ce7b",
-		sizeof(dev_priv->perf.test_config.uuid));
-	dev_priv->perf.test_config.id = 1;
-
-	dev_priv->perf.test_config.mux_regs = mux_config_test_oa;
-	dev_priv->perf.test_config.mux_regs_len = ARRAY_SIZE(mux_config_test_oa);
-
-	dev_priv->perf.test_config.b_counter_regs = b_counter_config_test_oa;
-	dev_priv->perf.test_config.b_counter_regs_len = ARRAY_SIZE(b_counter_config_test_oa);
-
-	dev_priv->perf.test_config.flex_regs = flex_eu_config_test_oa;
-	dev_priv->perf.test_config.flex_regs_len = ARRAY_SIZE(flex_eu_config_test_oa);
-
-	dev_priv->perf.test_config.sysfs_metric.name = "80a833f0-2504-4321-8894-e9277844ce7b";
-	dev_priv->perf.test_config.sysfs_metric.attrs = dev_priv->perf.test_config.attrs;
-
-	dev_priv->perf.test_config.attrs[0] = &dev_priv->perf.test_config.sysfs_metric_id.attr;
-
-	dev_priv->perf.test_config.sysfs_metric_id.attr.name = "id";
-	dev_priv->perf.test_config.sysfs_metric_id.attr.mode = 0444;
-	dev_priv->perf.test_config.sysfs_metric_id.show = show_test_oa_id;
-}
diff --git a/drivers/gpu/drm/i915/oa/i915_oa_tgl.h b/drivers/gpu/drm/i915/oa/i915_oa_tgl.h
deleted file mode 100644
index 4c25f0be825c..000000000000
--- a/drivers/gpu/drm/i915/oa/i915_oa_tgl.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: MIT */
-/*
- * Copyright © 2018 Intel Corporation
- *
- * Autogenerated file by GPU Top : https://github.com/rib/gputop
- * DO NOT EDIT manually!
- */
-
-#ifndef __I915_OA_TGL_H__
-#define __I915_OA_TGL_H__
-
-struct drm_i915_private;
-
-void i915_perf_load_test_config_tgl(struct drm_i915_private *dev_priv);
-
-#endif
diff --git a/drivers/gpu/drm/i915/selftests/i915_active.c b/drivers/gpu/drm/i915/selftests/i915_active.c
index 68bbb1580162..4002c984c2e0 100644
--- a/drivers/gpu/drm/i915/selftests/i915_active.c
+++ b/drivers/gpu/drm/i915/selftests/i915_active.c
@@ -153,7 +153,7 @@ static int live_active_wait(void *arg)
 	if (IS_ERR(active))
 		return PTR_ERR(active);
 
-	i915_active_wait(&active->base);
+	__i915_active_wait(&active->base, TASK_UNINTERRUPTIBLE);
 	if (!READ_ONCE(active->retired)) {
 		struct drm_printer p = drm_err_printer(__func__);
 
@@ -228,11 +228,11 @@ static int live_active_barrier(void *arg)
 	}
 
 	i915_active_release(&active->base);
+	if (err)
+		goto out;
 
-	if (err == 0)
-		err = i915_active_wait(&active->base);
-
-	if (err == 0 && !READ_ONCE(active->retired)) {
+	__i915_active_wait(&active->base, TASK_UNINTERRUPTIBLE);
+	if (!READ_ONCE(active->retired)) {
 		pr_err("i915_active not retired after flushing barriers!\n");
 		err = -EINVAL;
 	}
@@ -277,7 +277,7 @@ static struct intel_engine_cs *node_to_barrier(struct active_node *it)
 
 void i915_active_print(struct i915_active *ref, struct drm_printer *m)
 {
-	drm_printf(m, "active %pS:%pS\n", ref->active, ref->retire);
+	drm_printf(m, "active %ps:%ps\n", ref->active, ref->retire);
 	drm_printf(m, "\tcount: %d\n", atomic_read(&ref->count));
 	drm_printf(m, "\tpreallocated barriers? %s\n",
 		   yesno(!llist_empty(&ref->preallocated_barriers)));
diff --git a/drivers/gpu/drm/i915/selftests/i915_gem.c b/drivers/gpu/drm/i915/selftests/i915_gem.c
index 623759b73bb4..88d400b9df88 100644
--- a/drivers/gpu/drm/i915/selftests/i915_gem.c
+++ b/drivers/gpu/drm/i915/selftests/i915_gem.c
@@ -125,8 +125,6 @@ static void pm_resume(struct drm_i915_private *i915)
 	 */
 	with_intel_runtime_pm(&i915->runtime_pm, wakeref) {
 		i915_ggtt_resume(&i915->ggtt);
-		i915_gem_restore_fences(&i915->ggtt);
-
 		i915_gem_resume(i915);
 	}
 }
diff --git a/drivers/gpu/drm/i915/selftests/i915_gem_evict.c b/drivers/gpu/drm/i915/selftests/i915_gem_evict.c
index 06ef88510209..028baae9631f 100644
--- a/drivers/gpu/drm/i915/selftests/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/selftests/i915_gem_evict.c
@@ -45,8 +45,8 @@ static void quirk_add(struct drm_i915_gem_object *obj,
 
 static int populate_ggtt(struct i915_ggtt *ggtt, struct list_head *objects)
 {
-	unsigned long unbound, bound, count;
 	struct drm_i915_gem_object *obj;
+	unsigned long count;
 
 	count = 0;
 	do {
@@ -72,30 +72,6 @@ static int populate_ggtt(struct i915_ggtt *ggtt, struct list_head *objects)
 	pr_debug("Filled GGTT with %lu pages [%llu total]\n",
 		 count, ggtt->vm.total / PAGE_SIZE);
 
-	bound = 0;
-	unbound = 0;
-	list_for_each_entry(obj, objects, st_link) {
-		GEM_BUG_ON(!obj->mm.quirked);
-
-		if (atomic_read(&obj->bind_count))
-			bound++;
-		else
-			unbound++;
-	}
-	GEM_BUG_ON(bound + unbound != count);
-
-	if (unbound) {
-		pr_err("%s: Found %lu objects unbound, expected %u!\n",
-		       __func__, unbound, 0);
-		return -EINVAL;
-	}
-
-	if (bound != count) {
-		pr_err("%s: Found %lu objects bound, expected %lu!\n",
-		       __func__, bound, count);
-		return -EINVAL;
-	}
-
 	if (list_empty(&ggtt->vm.bound_list)) {
 		pr_err("No objects on the GGTT inactive list!\n");
 		return -EINVAL;
diff --git a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
index b342bef5e7c9..2e471500a646 100644
--- a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
@@ -331,9 +331,6 @@ static void close_object_list(struct list_head *objects,
 		vma = i915_vma_instance(obj, vm, NULL);
 		if (!IS_ERR(vma))
 			ignored = i915_vma_unbind(vma);
-		/* Only ppgtt vma may be closed before the object is freed */
-		if (!IS_ERR(vma) && !i915_vma_is_ggtt(vma))
-			i915_vma_close(vma);
 
 		list_del(&obj->st_link);
 		i915_gem_object_put(obj);
@@ -591,7 +588,7 @@ static int walk_hole(struct i915_address_space *vm,
 				pr_err("%s bind failed at %llx + %llx [hole %llx- %llx] with err=%d\n",
 				       __func__, addr, vma->size,
 				       hole_start, hole_end, err);
-				goto err_close;
+				goto err_put;
 			}
 			i915_vma_unpin(vma);
 
@@ -600,14 +597,14 @@ static int walk_hole(struct i915_address_space *vm,
 				pr_err("%s incorrect at %llx + %llx\n",
 				       __func__, addr, vma->size);
 				err = -EINVAL;
-				goto err_close;
+				goto err_put;
 			}
 
 			err = i915_vma_unbind(vma);
 			if (err) {
 				pr_err("%s unbind failed at %llx + %llx  with err=%d\n",
 				       __func__, addr, vma->size, err);
-				goto err_close;
+				goto err_put;
 			}
 
 			GEM_BUG_ON(drm_mm_node_allocated(&vma->node));
@@ -616,13 +613,10 @@ static int walk_hole(struct i915_address_space *vm,
 					"%s timed out at %llx\n",
 					__func__, addr)) {
 				err = -EINTR;
-				goto err_close;
+				goto err_put;
 			}
 		}
 
-err_close:
-		if (!i915_vma_is_ggtt(vma))
-			i915_vma_close(vma);
 err_put:
 		i915_gem_object_put(obj);
 		if (err)
@@ -675,7 +669,7 @@ static int pot_hole(struct i915_address_space *vm,
 				       addr,
 				       hole_start, hole_end,
 				       err);
-				goto err;
+				goto err_obj;
 			}
 
 			if (!drm_mm_node_allocated(&vma->node) ||
@@ -685,7 +679,7 @@ static int pot_hole(struct i915_address_space *vm,
 				i915_vma_unpin(vma);
 				err = i915_vma_unbind(vma);
 				err = -EINVAL;
-				goto err;
+				goto err_obj;
 			}
 
 			i915_vma_unpin(vma);
@@ -697,13 +691,10 @@ static int pot_hole(struct i915_address_space *vm,
 				"%s timed out after %d/%d\n",
 				__func__, pot, fls64(hole_end - 1) - 1)) {
 			err = -EINTR;
-			goto err;
+			goto err_obj;
 		}
 	}
 
-err:
-	if (!i915_vma_is_ggtt(vma))
-		i915_vma_close(vma);
 err_obj:
 	i915_gem_object_put(obj);
 	return err;
@@ -778,7 +769,7 @@ static int drunk_hole(struct i915_address_space *vm,
 				       addr, BIT_ULL(size),
 				       hole_start, hole_end,
 				       err);
-				goto err;
+				goto err_obj;
 			}
 
 			if (!drm_mm_node_allocated(&vma->node) ||
@@ -788,7 +779,7 @@ static int drunk_hole(struct i915_address_space *vm,
 				i915_vma_unpin(vma);
 				err = i915_vma_unbind(vma);
 				err = -EINVAL;
-				goto err;
+				goto err_obj;
 			}
 
 			i915_vma_unpin(vma);
@@ -799,13 +790,10 @@ static int drunk_hole(struct i915_address_space *vm,
 					"%s timed out after %d/%d\n",
 					__func__, n, count)) {
 				err = -EINTR;
-				goto err;
+				goto err_obj;
 			}
 		}
 
-err:
-		if (!i915_vma_is_ggtt(vma))
-			i915_vma_close(vma);
 err_obj:
 		i915_gem_object_put(obj);
 		kfree(order);
@@ -1229,7 +1217,6 @@ static void track_vma_bind(struct i915_vma *vma)
 {
 	struct drm_i915_gem_object *obj = vma->obj;
 
-	atomic_inc(&obj->bind_count); /* track for eviction later */
 	__i915_gem_object_pin_pages(obj);
 
 	GEM_BUG_ON(vma->pages);
diff --git a/drivers/gpu/drm/i915/selftests/i915_mock_selftests.h b/drivers/gpu/drm/i915/selftests/i915_mock_selftests.h
index 5b39bab4da1d..6a2be7d0dd95 100644
--- a/drivers/gpu/drm/i915/selftests/i915_mock_selftests.h
+++ b/drivers/gpu/drm/i915/selftests/i915_mock_selftests.h
@@ -16,6 +16,7 @@
  * Tests are executed in order by igt/drv_selftest
  */
 selftest(sanitycheck, i915_mock_sanitycheck) /* keep first (igt selfcheck) */
+selftest(shmem, shmem_utils_mock_selftests)
 selftest(fence, i915_sw_fence_mock_selftests)
 selftest(scatterlist, scatterlist_mock_selftests)
 selftest(syncmap, i915_syncmap_mock_selftests)
diff --git a/drivers/gpu/drm/i915/selftests/i915_perf.c b/drivers/gpu/drm/i915/selftests/i915_perf.c
index d1a1568c47ba..5608fab98d5d 100644
--- a/drivers/gpu/drm/i915/selftests/i915_perf.c
+++ b/drivers/gpu/drm/i915/selftests/i915_perf.c
@@ -14,10 +14,85 @@
 #include "igt_flush_test.h"
 #include "lib_sw_fence.h"
 
+#define TEST_OA_CONFIG_UUID "12345678-1234-1234-1234-1234567890ab"
+
+static int
+alloc_empty_config(struct i915_perf *perf)
+{
+	struct i915_oa_config *oa_config;
+
+	oa_config = kzalloc(sizeof(*oa_config), GFP_KERNEL);
+	if (!oa_config)
+		return -ENOMEM;
+
+	oa_config->perf = perf;
+	kref_init(&oa_config->ref);
+
+	strlcpy(oa_config->uuid, TEST_OA_CONFIG_UUID, sizeof(oa_config->uuid));
+
+	mutex_lock(&perf->metrics_lock);
+
+	oa_config->id = idr_alloc(&perf->metrics_idr, oa_config, 2, 0, GFP_KERNEL);
+	if (oa_config->id < 0)  {
+		mutex_unlock(&perf->metrics_lock);
+		i915_oa_config_put(oa_config);
+		return -ENOMEM;
+	}
+
+	mutex_unlock(&perf->metrics_lock);
+
+	return 0;
+}
+
+static void
+destroy_empty_config(struct i915_perf *perf)
+{
+	struct i915_oa_config *oa_config = NULL, *tmp;
+	int id;
+
+	mutex_lock(&perf->metrics_lock);
+
+	idr_for_each_entry(&perf->metrics_idr, tmp, id) {
+		if (!strcmp(tmp->uuid, TEST_OA_CONFIG_UUID)) {
+			oa_config = tmp;
+			break;
+		}
+	}
+
+	if (oa_config)
+		idr_remove(&perf->metrics_idr, oa_config->id);
+
+	mutex_unlock(&perf->metrics_lock);
+
+	if (oa_config)
+		i915_oa_config_put(oa_config);
+}
+
+static struct i915_oa_config *
+get_empty_config(struct i915_perf *perf)
+{
+	struct i915_oa_config *oa_config = NULL, *tmp;
+	int id;
+
+	mutex_lock(&perf->metrics_lock);
+
+	idr_for_each_entry(&perf->metrics_idr, tmp, id) {
+		if (!strcmp(tmp->uuid, TEST_OA_CONFIG_UUID)) {
+			oa_config = i915_oa_config_get(tmp);
+			break;
+		}
+	}
+
+	mutex_unlock(&perf->metrics_lock);
+
+	return oa_config;
+}
+
 static struct i915_perf_stream *
 test_stream(struct i915_perf *perf)
 {
 	struct drm_i915_perf_open_param param = {};
+	struct i915_oa_config *oa_config = get_empty_config(perf);
 	struct perf_open_properties props = {
 		.engine = intel_engine_lookup_user(perf->i915,
 						   I915_ENGINE_CLASS_RENDER,
@@ -25,13 +100,19 @@ test_stream(struct i915_perf *perf)
 		.sample_flags = SAMPLE_OA_REPORT,
 		.oa_format = IS_GEN(perf->i915, 12) ?
 		I915_OA_FORMAT_A32u40_A4u32_B8_C8 : I915_OA_FORMAT_C4_B8,
-		.metrics_set = 1,
 	};
 	struct i915_perf_stream *stream;
 
+	if (!oa_config)
+		return NULL;
+
+	props.metrics_set = oa_config->id;
+
 	stream = kzalloc(sizeof(*stream), GFP_KERNEL);
-	if (!stream)
+	if (!stream) {
+		i915_oa_config_put(oa_config);
 		return NULL;
+	}
 
 	stream->perf = perf;
 
@@ -42,6 +123,8 @@ test_stream(struct i915_perf *perf)
 	}
 	mutex_unlock(&perf->lock);
 
+	i915_oa_config_put(oa_config);
+
 	return stream;
 }
 
@@ -206,6 +289,7 @@ int i915_perf_live_selftests(struct drm_i915_private *i915)
 		SUBTEST(live_noa_delay),
 	};
 	struct i915_perf *perf = &i915->perf;
+	int err;
 
 	if (!perf->metrics_kobj || !perf->ops.enable_metric_set)
 		return 0;
@@ -213,5 +297,13 @@ int i915_perf_live_selftests(struct drm_i915_private *i915)
 	if (intel_gt_is_wedged(&i915->gt))
 		return 0;
 
-	return i915_subtests(tests, i915);
+	err = alloc_empty_config(&i915->perf);
+	if (err)
+		return err;
+
+	err = i915_subtests(tests, i915);
+
+	destroy_empty_config(&i915->perf);
+
+	return err;
 }
diff --git a/drivers/gpu/drm/i915/selftests/i915_perf_selftests.h b/drivers/gpu/drm/i915/selftests/i915_perf_selftests.h
index 3bf7f53e9924..d8da142985eb 100644
--- a/drivers/gpu/drm/i915/selftests/i915_perf_selftests.h
+++ b/drivers/gpu/drm/i915/selftests/i915_perf_selftests.h
@@ -16,5 +16,6 @@
  * Tests are executed in order by igt/i915_selftest
  */
 selftest(engine_cs, intel_engine_cs_perf_selftests)
+selftest(request, i915_request_perf_selftests)
 selftest(blt, i915_gem_object_blt_perf_selftests)
 selftest(region, intel_memory_region_perf_selftests)
diff --git a/drivers/gpu/drm/i915/selftests/i915_request.c b/drivers/gpu/drm/i915/selftests/i915_request.c
index f89d9c42f1fa..15b1ca9f7a01 100644
--- a/drivers/gpu/drm/i915/selftests/i915_request.c
+++ b/drivers/gpu/drm/i915/selftests/i915_request.c
@@ -23,11 +23,13 @@
  */
 
 #include <linux/prime_numbers.h>
+#include <linux/pm_qos.h>
 
 #include "gem/i915_gem_pm.h"
 #include "gem/selftests/mock_context.h"
 
 #include "gt/intel_engine_pm.h"
+#include "gt/intel_engine_user.h"
 #include "gt/intel_gt.h"
 
 #include "i915_random.h"
@@ -51,6 +53,11 @@ static unsigned int num_uabi_engines(struct drm_i915_private *i915)
 	return count;
 }
 
+static struct intel_engine_cs *rcs0(struct drm_i915_private *i915)
+{
+	return intel_engine_lookup_user(i915, I915_ENGINE_CLASS_RENDER, 0);
+}
+
 static int igt_add_request(void *arg)
 {
 	struct drm_i915_private *i915 = arg;
@@ -58,7 +65,7 @@ static int igt_add_request(void *arg)
 
 	/* Basic preliminary test to create a request and let it loose! */
 
-	request = mock_request(i915->engine[RCS0]->kernel_context, HZ / 10);
+	request = mock_request(rcs0(i915)->kernel_context, HZ / 10);
 	if (!request)
 		return -ENOMEM;
 
@@ -76,7 +83,7 @@ static int igt_wait_request(void *arg)
 
 	/* Submit a request, then wait upon it */
 
-	request = mock_request(i915->engine[RCS0]->kernel_context, T);
+	request = mock_request(rcs0(i915)->kernel_context, T);
 	if (!request)
 		return -ENOMEM;
 
@@ -145,7 +152,7 @@ static int igt_fence_wait(void *arg)
 
 	/* Submit a request, treat it as a fence and wait upon it */
 
-	request = mock_request(i915->engine[RCS0]->kernel_context, T);
+	request = mock_request(rcs0(i915)->kernel_context, T);
 	if (!request)
 		return -ENOMEM;
 
@@ -420,7 +427,7 @@ static int mock_breadcrumbs_smoketest(void *arg)
 {
 	struct drm_i915_private *i915 = arg;
 	struct smoketest t = {
-		.engine = i915->engine[RCS0],
+		.engine = rcs0(i915),
 		.ncontexts = 1024,
 		.max_batch = 1024,
 		.request_alloc = __mock_request_alloc
@@ -1233,7 +1240,7 @@ static int live_parallel_engines(void *arg)
 		struct igt_live_test t;
 		unsigned int idx;
 
-		snprintf(name, sizeof(name), "%pS", fn);
+		snprintf(name, sizeof(name), "%ps", *fn);
 		err = igt_live_test_begin(&t, i915, __func__, name);
 		if (err)
 			break;
@@ -1470,3 +1477,572 @@ int i915_request_live_selftests(struct drm_i915_private *i915)
 
 	return i915_subtests(tests, i915);
 }
+
+static int switch_to_kernel_sync(struct intel_context *ce, int err)
+{
+	struct i915_request *rq;
+	struct dma_fence *fence;
+
+	rq = intel_engine_create_kernel_request(ce->engine);
+	if (IS_ERR(rq))
+		return PTR_ERR(rq);
+
+	fence = i915_active_fence_get(&ce->timeline->last_request);
+	if (fence) {
+		i915_request_await_dma_fence(rq, fence);
+		dma_fence_put(fence);
+	}
+
+	rq = i915_request_get(rq);
+	i915_request_add(rq);
+	if (i915_request_wait(rq, 0, HZ / 2) < 0 && !err)
+		err = -ETIME;
+	i915_request_put(rq);
+
+	while (!err && !intel_engine_is_idle(ce->engine))
+		intel_engine_flush_submission(ce->engine);
+
+	return err;
+}
+
+struct perf_stats {
+	struct intel_engine_cs *engine;
+	unsigned long count;
+	ktime_t time;
+	ktime_t busy;
+	u64 runtime;
+};
+
+struct perf_series {
+	struct drm_i915_private *i915;
+	unsigned int nengines;
+	struct intel_context *ce[];
+};
+
+static int s_sync0(void *arg)
+{
+	struct perf_series *ps = arg;
+	IGT_TIMEOUT(end_time);
+	unsigned int idx = 0;
+	int err = 0;
+
+	GEM_BUG_ON(!ps->nengines);
+	do {
+		struct i915_request *rq;
+
+		rq = i915_request_create(ps->ce[idx]);
+		if (IS_ERR(rq)) {
+			err = PTR_ERR(rq);
+			break;
+		}
+
+		i915_request_get(rq);
+		i915_request_add(rq);
+
+		if (i915_request_wait(rq, 0, HZ / 5) < 0)
+			err = -ETIME;
+		i915_request_put(rq);
+		if (err)
+			break;
+
+		if (++idx == ps->nengines)
+			idx = 0;
+	} while (!__igt_timeout(end_time, NULL));
+
+	return err;
+}
+
+static int s_sync1(void *arg)
+{
+	struct perf_series *ps = arg;
+	struct i915_request *prev = NULL;
+	IGT_TIMEOUT(end_time);
+	unsigned int idx = 0;
+	int err = 0;
+
+	GEM_BUG_ON(!ps->nengines);
+	do {
+		struct i915_request *rq;
+
+		rq = i915_request_create(ps->ce[idx]);
+		if (IS_ERR(rq)) {
+			err = PTR_ERR(rq);
+			break;
+		}
+
+		i915_request_get(rq);
+		i915_request_add(rq);
+
+		if (prev && i915_request_wait(prev, 0, HZ / 5) < 0)
+			err = -ETIME;
+		i915_request_put(prev);
+		prev = rq;
+		if (err)
+			break;
+
+		if (++idx == ps->nengines)
+			idx = 0;
+	} while (!__igt_timeout(end_time, NULL));
+	i915_request_put(prev);
+
+	return err;
+}
+
+static int s_many(void *arg)
+{
+	struct perf_series *ps = arg;
+	IGT_TIMEOUT(end_time);
+	unsigned int idx = 0;
+
+	GEM_BUG_ON(!ps->nengines);
+	do {
+		struct i915_request *rq;
+
+		rq = i915_request_create(ps->ce[idx]);
+		if (IS_ERR(rq))
+			return PTR_ERR(rq);
+
+		i915_request_add(rq);
+
+		if (++idx == ps->nengines)
+			idx = 0;
+	} while (!__igt_timeout(end_time, NULL));
+
+	return 0;
+}
+
+static int perf_series_engines(void *arg)
+{
+	struct drm_i915_private *i915 = arg;
+	static int (* const func[])(void *arg) = {
+		s_sync0,
+		s_sync1,
+		s_many,
+		NULL,
+	};
+	const unsigned int nengines = num_uabi_engines(i915);
+	struct intel_engine_cs *engine;
+	int (* const *fn)(void *arg);
+	struct pm_qos_request qos;
+	struct perf_stats *stats;
+	struct perf_series *ps;
+	unsigned int idx;
+	int err = 0;
+
+	stats = kcalloc(nengines, sizeof(*stats), GFP_KERNEL);
+	if (!stats)
+		return -ENOMEM;
+
+	ps = kzalloc(struct_size(ps, ce, nengines), GFP_KERNEL);
+	if (!ps) {
+		kfree(stats);
+		return -ENOMEM;
+	}
+
+	cpu_latency_qos_add_request(&qos, 0); /* disable cstates */
+
+	ps->i915 = i915;
+	ps->nengines = nengines;
+
+	idx = 0;
+	for_each_uabi_engine(engine, i915) {
+		struct intel_context *ce;
+
+		ce = intel_context_create(engine);
+		if (IS_ERR(ce))
+			goto out;
+
+		err = intel_context_pin(ce);
+		if (err) {
+			intel_context_put(ce);
+			goto out;
+		}
+
+		ps->ce[idx++] = ce;
+	}
+	GEM_BUG_ON(idx != ps->nengines);
+
+	for (fn = func; *fn && !err; fn++) {
+		char name[KSYM_NAME_LEN];
+		struct igt_live_test t;
+
+		snprintf(name, sizeof(name), "%ps", *fn);
+		err = igt_live_test_begin(&t, i915, __func__, name);
+		if (err)
+			break;
+
+		for (idx = 0; idx < nengines; idx++) {
+			struct perf_stats *p =
+				memset(&stats[idx], 0, sizeof(stats[idx]));
+			struct intel_context *ce = ps->ce[idx];
+
+			p->engine = ps->ce[idx]->engine;
+			intel_engine_pm_get(p->engine);
+
+			if (intel_engine_supports_stats(p->engine))
+				p->busy = intel_engine_get_busy_time(p->engine) + 1;
+			p->runtime = -intel_context_get_total_runtime_ns(ce);
+			p->time = ktime_get();
+		}
+
+		err = (*fn)(ps);
+		if (igt_live_test_end(&t))
+			err = -EIO;
+
+		for (idx = 0; idx < nengines; idx++) {
+			struct perf_stats *p = &stats[idx];
+			struct intel_context *ce = ps->ce[idx];
+			int integer, decimal;
+			u64 busy, dt;
+
+			p->time = ktime_sub(ktime_get(), p->time);
+			if (p->busy) {
+				p->busy = ktime_sub(intel_engine_get_busy_time(p->engine),
+						    p->busy - 1);
+			}
+
+			err = switch_to_kernel_sync(ce, err);
+			p->runtime += intel_context_get_total_runtime_ns(ce);
+			intel_engine_pm_put(p->engine);
+
+			busy = 100 * ktime_to_ns(p->busy);
+			dt = ktime_to_ns(p->time);
+			if (dt) {
+				integer = div64_u64(busy, dt);
+				busy -= integer * dt;
+				decimal = div64_u64(100 * busy, dt);
+			} else {
+				integer = 0;
+				decimal = 0;
+			}
+
+			pr_info("%s %5s: { seqno:%d, busy:%d.%02d%%, runtime:%lldms, walltime:%lldms }\n",
+				name, p->engine->name, ce->timeline->seqno,
+				integer, decimal,
+				div_u64(p->runtime, 1000 * 1000),
+				div_u64(ktime_to_ns(p->time), 1000 * 1000));
+		}
+	}
+
+out:
+	for (idx = 0; idx < nengines; idx++) {
+		if (IS_ERR_OR_NULL(ps->ce[idx]))
+			break;
+
+		intel_context_unpin(ps->ce[idx]);
+		intel_context_put(ps->ce[idx]);
+	}
+	kfree(ps);
+
+	cpu_latency_qos_remove_request(&qos);
+	kfree(stats);
+	return err;
+}
+
+static int p_sync0(void *arg)
+{
+	struct perf_stats *p = arg;
+	struct intel_engine_cs *engine = p->engine;
+	struct intel_context *ce;
+	IGT_TIMEOUT(end_time);
+	unsigned long count;
+	bool busy;
+	int err = 0;
+
+	ce = intel_context_create(engine);
+	if (IS_ERR(ce))
+		return PTR_ERR(ce);
+
+	err = intel_context_pin(ce);
+	if (err) {
+		intel_context_put(ce);
+		return err;
+	}
+
+	busy = false;
+	if (intel_engine_supports_stats(engine)) {
+		p->busy = intel_engine_get_busy_time(engine);
+		busy = true;
+	}
+
+	p->time = ktime_get();
+	count = 0;
+	do {
+		struct i915_request *rq;
+
+		rq = i915_request_create(ce);
+		if (IS_ERR(rq)) {
+			err = PTR_ERR(rq);
+			break;
+		}
+
+		i915_request_get(rq);
+		i915_request_add(rq);
+
+		err = 0;
+		if (i915_request_wait(rq, 0, HZ / 5) < 0)
+			err = -ETIME;
+		i915_request_put(rq);
+		if (err)
+			break;
+
+		count++;
+	} while (!__igt_timeout(end_time, NULL));
+	p->time = ktime_sub(ktime_get(), p->time);
+
+	if (busy) {
+		p->busy = ktime_sub(intel_engine_get_busy_time(engine),
+				    p->busy);
+	}
+
+	err = switch_to_kernel_sync(ce, err);
+	p->runtime = intel_context_get_total_runtime_ns(ce);
+	p->count = count;
+
+	intel_context_unpin(ce);
+	intel_context_put(ce);
+	return err;
+}
+
+static int p_sync1(void *arg)
+{
+	struct perf_stats *p = arg;
+	struct intel_engine_cs *engine = p->engine;
+	struct i915_request *prev = NULL;
+	struct intel_context *ce;
+	IGT_TIMEOUT(end_time);
+	unsigned long count;
+	bool busy;
+	int err = 0;
+
+	ce = intel_context_create(engine);
+	if (IS_ERR(ce))
+		return PTR_ERR(ce);
+
+	err = intel_context_pin(ce);
+	if (err) {
+		intel_context_put(ce);
+		return err;
+	}
+
+	busy = false;
+	if (intel_engine_supports_stats(engine)) {
+		p->busy = intel_engine_get_busy_time(engine);
+		busy = true;
+	}
+
+	p->time = ktime_get();
+	count = 0;
+	do {
+		struct i915_request *rq;
+
+		rq = i915_request_create(ce);
+		if (IS_ERR(rq)) {
+			err = PTR_ERR(rq);
+			break;
+		}
+
+		i915_request_get(rq);
+		i915_request_add(rq);
+
+		err = 0;
+		if (prev && i915_request_wait(prev, 0, HZ / 5) < 0)
+			err = -ETIME;
+		i915_request_put(prev);
+		prev = rq;
+		if (err)
+			break;
+
+		count++;
+	} while (!__igt_timeout(end_time, NULL));
+	i915_request_put(prev);
+	p->time = ktime_sub(ktime_get(), p->time);
+
+	if (busy) {
+		p->busy = ktime_sub(intel_engine_get_busy_time(engine),
+				    p->busy);
+	}
+
+	err = switch_to_kernel_sync(ce, err);
+	p->runtime = intel_context_get_total_runtime_ns(ce);
+	p->count = count;
+
+	intel_context_unpin(ce);
+	intel_context_put(ce);
+	return err;
+}
+
+static int p_many(void *arg)
+{
+	struct perf_stats *p = arg;
+	struct intel_engine_cs *engine = p->engine;
+	struct intel_context *ce;
+	IGT_TIMEOUT(end_time);
+	unsigned long count;
+	int err = 0;
+	bool busy;
+
+	ce = intel_context_create(engine);
+	if (IS_ERR(ce))
+		return PTR_ERR(ce);
+
+	err = intel_context_pin(ce);
+	if (err) {
+		intel_context_put(ce);
+		return err;
+	}
+
+	busy = false;
+	if (intel_engine_supports_stats(engine)) {
+		p->busy = intel_engine_get_busy_time(engine);
+		busy = true;
+	}
+
+	count = 0;
+	p->time = ktime_get();
+	do {
+		struct i915_request *rq;
+
+		rq = i915_request_create(ce);
+		if (IS_ERR(rq)) {
+			err = PTR_ERR(rq);
+			break;
+		}
+
+		i915_request_add(rq);
+		count++;
+	} while (!__igt_timeout(end_time, NULL));
+	p->time = ktime_sub(ktime_get(), p->time);
+
+	if (busy) {
+		p->busy = ktime_sub(intel_engine_get_busy_time(engine),
+				    p->busy);
+	}
+
+	err = switch_to_kernel_sync(ce, err);
+	p->runtime = intel_context_get_total_runtime_ns(ce);
+	p->count = count;
+
+	intel_context_unpin(ce);
+	intel_context_put(ce);
+	return err;
+}
+
+static int perf_parallel_engines(void *arg)
+{
+	struct drm_i915_private *i915 = arg;
+	static int (* const func[])(void *arg) = {
+		p_sync0,
+		p_sync1,
+		p_many,
+		NULL,
+	};
+	const unsigned int nengines = num_uabi_engines(i915);
+	struct intel_engine_cs *engine;
+	int (* const *fn)(void *arg);
+	struct pm_qos_request qos;
+	struct {
+		struct perf_stats p;
+		struct task_struct *tsk;
+	} *engines;
+	int err = 0;
+
+	engines = kcalloc(nengines, sizeof(*engines), GFP_KERNEL);
+	if (!engines)
+		return -ENOMEM;
+
+	cpu_latency_qos_add_request(&qos, 0);
+
+	for (fn = func; *fn; fn++) {
+		char name[KSYM_NAME_LEN];
+		struct igt_live_test t;
+		unsigned int idx;
+
+		snprintf(name, sizeof(name), "%ps", *fn);
+		err = igt_live_test_begin(&t, i915, __func__, name);
+		if (err)
+			break;
+
+		atomic_set(&i915->selftest.counter, nengines);
+
+		idx = 0;
+		for_each_uabi_engine(engine, i915) {
+			intel_engine_pm_get(engine);
+
+			memset(&engines[idx].p, 0, sizeof(engines[idx].p));
+			engines[idx].p.engine = engine;
+
+			engines[idx].tsk = kthread_run(*fn, &engines[idx].p,
+						       "igt:%s", engine->name);
+			if (IS_ERR(engines[idx].tsk)) {
+				err = PTR_ERR(engines[idx].tsk);
+				intel_engine_pm_put(engine);
+				break;
+			}
+			get_task_struct(engines[idx++].tsk);
+		}
+
+		yield(); /* start all threads before we kthread_stop() */
+
+		idx = 0;
+		for_each_uabi_engine(engine, i915) {
+			int status;
+
+			if (IS_ERR(engines[idx].tsk))
+				break;
+
+			status = kthread_stop(engines[idx].tsk);
+			if (status && !err)
+				err = status;
+
+			intel_engine_pm_put(engine);
+			put_task_struct(engines[idx++].tsk);
+		}
+
+		if (igt_live_test_end(&t))
+			err = -EIO;
+		if (err)
+			break;
+
+		idx = 0;
+		for_each_uabi_engine(engine, i915) {
+			struct perf_stats *p = &engines[idx].p;
+			u64 busy = 100 * ktime_to_ns(p->busy);
+			u64 dt = ktime_to_ns(p->time);
+			int integer, decimal;
+
+			if (dt) {
+				integer = div64_u64(busy, dt);
+				busy -= integer * dt;
+				decimal = div64_u64(100 * busy, dt);
+			} else {
+				integer = 0;
+				decimal = 0;
+			}
+
+			GEM_BUG_ON(engine != p->engine);
+			pr_info("%s %5s: { count:%lu, busy:%d.%02d%%, runtime:%lldms, walltime:%lldms }\n",
+				name, engine->name, p->count, integer, decimal,
+				div_u64(p->runtime, 1000 * 1000),
+				div_u64(ktime_to_ns(p->time), 1000 * 1000));
+			idx++;
+		}
+	}
+
+	cpu_latency_qos_remove_request(&qos);
+	kfree(engines);
+	return err;
+}
+
+int i915_request_perf_selftests(struct drm_i915_private *i915)
+{
+	static const struct i915_subtest tests[] = {
+		SUBTEST(perf_series_engines),
+		SUBTEST(perf_parallel_engines),
+	};
+
+	if (intel_gt_is_wedged(&i915->gt))
+		return 0;
+
+	return i915_subtests(tests, i915);
+}
diff --git a/drivers/gpu/drm/i915/selftests/i915_vma.c b/drivers/gpu/drm/i915/selftests/i915_vma.c
index 58b5f40a07dd..af89c7fc8f59 100644
--- a/drivers/gpu/drm/i915/selftests/i915_vma.c
+++ b/drivers/gpu/drm/i915/selftests/i915_vma.c
@@ -173,7 +173,7 @@ static int igt_vma_create(void *arg)
 		}
 
 		nc = 0;
-		for_each_prime_number(num_ctx, 2 * NUM_CONTEXT_TAG) {
+		for_each_prime_number(num_ctx, 2 * BITS_PER_LONG) {
 			for (; nc < num_ctx; nc++) {
 				ctx = mock_context(i915, "mock");
 				if (!ctx)
diff --git a/drivers/gpu/drm/i915/selftests/intel_memory_region.c b/drivers/gpu/drm/i915/selftests/intel_memory_region.c
index 2a1d4ba1f9f3..6e80d99048e4 100644
--- a/drivers/gpu/drm/i915/selftests/intel_memory_region.c
+++ b/drivers/gpu/drm/i915/selftests/intel_memory_region.c
@@ -594,8 +594,11 @@ create_region_for_mapping(struct intel_memory_region *mr, u64 size, u32 type,
 	void *addr;
 
 	obj = i915_gem_object_create_region(mr, size, 0);
-	if (IS_ERR(obj))
+	if (IS_ERR(obj)) {
+		if (PTR_ERR(obj) == -ENOSPC) /* Stolen memory */
+			return ERR_PTR(-ENODEV);
 		return obj;
+	}
 
 	addr = i915_gem_object_pin_map(obj, type);
 	if (IS_ERR(addr)) {
diff --git a/drivers/gpu/drm/i915/selftests/librapl.c b/drivers/gpu/drm/i915/selftests/librapl.c
new file mode 100644
index 000000000000..58710ac3f979
--- /dev/null
+++ b/drivers/gpu/drm/i915/selftests/librapl.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#include <asm/msr.h>
+
+#include "librapl.h"
+
+u64 librapl_energy_uJ(void)
+{
+	unsigned long long power;
+	u32 units;
+
+	if (rdmsrl_safe(MSR_RAPL_POWER_UNIT, &power))
+		return 0;
+
+	units = (power & 0x1f00) >> 8;
+
+	if (rdmsrl_safe(MSR_PP1_ENERGY_STATUS, &power))
+		return 0;
+
+	return (1000000 * power) >> units; /* convert to uJ */
+}
diff --git a/drivers/gpu/drm/i915/selftests/librapl.h b/drivers/gpu/drm/i915/selftests/librapl.h
new file mode 100644
index 000000000000..887f3e91dd05
--- /dev/null
+++ b/drivers/gpu/drm/i915/selftests/librapl.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef SELFTEST_LIBRAPL_H
+#define SELFTEST_LIBRAPL_H
+
+#include <linux/types.h>
+
+u64 librapl_energy_uJ(void);
+
+#endif /* SELFTEST_LIBRAPL_H */
diff --git a/drivers/gpu/drm/i915/selftests/mock_gem_device.c b/drivers/gpu/drm/i915/selftests/mock_gem_device.c
index 754d0eb6beaa..9b105b811f1f 100644
--- a/drivers/gpu/drm/i915/selftests/mock_gem_device.c
+++ b/drivers/gpu/drm/i915/selftests/mock_gem_device.c
@@ -25,6 +25,8 @@
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 
+#include <drm/drm_managed.h>
+
 #include "gt/intel_gt.h"
 #include "gt/intel_gt_requests.h"
 #include "gt/mock_engine.h"
@@ -55,6 +57,9 @@ static void mock_device_release(struct drm_device *dev)
 {
 	struct drm_i915_private *i915 = to_i915(dev);
 
+	if (!i915->do_release)
+		goto out;
+
 	mock_device_flush(i915);
 	intel_gt_driver_remove(&i915->gt);
 
@@ -71,8 +76,9 @@ static void mock_device_release(struct drm_device *dev)
 
 	drm_mode_config_cleanup(&i915->drm);
 
-	drm_dev_fini(&i915->drm);
+out:
 	put_device(&i915->drm.pdev->dev);
+	i915->drm.pdev = NULL;
 }
 
 static struct drm_driver mock_driver = {
@@ -114,9 +120,14 @@ struct drm_i915_private *mock_gem_device(void)
 	struct pci_dev *pdev;
 	int err;
 
-	pdev = kzalloc(sizeof(*pdev) + sizeof(*i915), GFP_KERNEL);
+	pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
 	if (!pdev)
-		goto err;
+		return NULL;
+	i915 = kzalloc(sizeof(*i915), GFP_KERNEL);
+	if (!i915) {
+		kfree(pdev);
+		return NULL;
+	}
 
 	device_initialize(&pdev->dev);
 	pdev->class = PCI_BASE_CLASS_DISPLAY << 16;
@@ -129,7 +140,6 @@ struct drm_i915_private *mock_gem_device(void)
 	pdev->dev.archdata.iommu = (void *)-1;
 #endif
 
-	i915 = (struct drm_i915_private *)(pdev + 1);
 	pci_set_drvdata(pdev, i915);
 
 	dev_pm_domain_set(&pdev->dev, &pm_domain);
@@ -141,9 +151,13 @@ struct drm_i915_private *mock_gem_device(void)
 	err = drm_dev_init(&i915->drm, &mock_driver, &pdev->dev);
 	if (err) {
 		pr_err("Failed to initialise mock GEM device: err=%d\n", err);
-		goto put_device;
+		put_device(&pdev->dev);
+		kfree(i915);
+
+		return NULL;
 	}
 	i915->drm.pdev = pdev;
+	drmm_add_final_kfree(&i915->drm, i915);
 
 	intel_runtime_pm_init_early(&i915->runtime_pm);
 
@@ -178,16 +192,18 @@ struct drm_i915_private *mock_gem_device(void)
 
 	mkwrite_device_info(i915)->engine_mask = BIT(0);
 
-	i915->engine[RCS0] = mock_engine(i915, "mock", RCS0);
-	if (!i915->engine[RCS0])
+	i915->gt.engine[RCS0] = mock_engine(i915, "mock", RCS0);
+	if (!i915->gt.engine[RCS0])
 		goto err_unlock;
 
-	if (mock_engine_init(i915->engine[RCS0]))
+	if (mock_engine_init(i915->gt.engine[RCS0]))
 		goto err_context;
 
 	__clear_bit(I915_WEDGED, &i915->gt.reset.flags);
 	intel_engines_driver_register(i915);
 
+	i915->do_release = true;
+
 	return i915;
 
 err_context:
@@ -198,9 +214,7 @@ struct drm_i915_private *mock_gem_device(void)
 	intel_gt_driver_late_release(&i915->gt);
 	intel_memory_regions_driver_release(i915);
 	drm_mode_config_cleanup(&i915->drm);
-	drm_dev_fini(&i915->drm);
-put_device:
-	put_device(&pdev->dev);
-err:
+	drm_dev_put(&i915->drm);
+
 	return NULL;
 }
diff --git a/drivers/gpu/drm/imx/dw_hdmi-imx.c b/drivers/gpu/drm/imx/dw_hdmi-imx.c
index f22cfbf9353e..ba4ca17fd4d8 100644
--- a/drivers/gpu/drm/imx/dw_hdmi-imx.c
+++ b/drivers/gpu/drm/imx/dw_hdmi-imx.c
@@ -18,6 +18,7 @@
 #include <drm/drm_edid.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_of.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "imx-drm.h"
 
@@ -143,10 +144,6 @@ static const struct drm_encoder_helper_funcs dw_hdmi_imx_encoder_helper_funcs =
 	.atomic_check = dw_hdmi_imx_atomic_check,
 };
 
-static const struct drm_encoder_funcs dw_hdmi_imx_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static enum drm_mode_status
 imx6q_hdmi_mode_valid(struct drm_connector *con,
 		      const struct drm_display_mode *mode)
@@ -236,8 +233,7 @@ static int dw_hdmi_imx_bind(struct device *dev, struct device *master,
 		return ret;
 
 	drm_encoder_helper_add(encoder, &dw_hdmi_imx_encoder_helper_funcs);
-	drm_encoder_init(drm, encoder, &dw_hdmi_imx_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
 	platform_set_drvdata(pdev, hdmi);
 
diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c
index da87c70e413b..2e38f1a5cf8d 100644
--- a/drivers/gpu/drm/imx/imx-drm-core.c
+++ b/drivers/gpu/drm/imx/imx-drm-core.c
@@ -42,12 +42,6 @@ void imx_drm_connector_destroy(struct drm_connector *connector)
 }
 EXPORT_SYMBOL_GPL(imx_drm_connector_destroy);
 
-void imx_drm_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-EXPORT_SYMBOL_GPL(imx_drm_encoder_destroy);
-
 static int imx_drm_atomic_check(struct drm_device *dev,
 				struct drm_atomic_state *state)
 {
@@ -139,8 +133,8 @@ int imx_drm_encoder_parse_of(struct drm_device *drm,
 
 	encoder->possible_crtcs = crtc_mask;
 
-	/* FIXME: this is the mask of outputs which can clone this output. */
-	encoder->possible_clones = ~0;
+	/* FIXME: cloning support not clear, disable it all for now */
+	encoder->possible_clones = 0;
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/imx/imx-drm.h b/drivers/gpu/drm/imx/imx-drm.h
index ab9c6f706eb3..c3e1a3f14d30 100644
--- a/drivers/gpu/drm/imx/imx-drm.h
+++ b/drivers/gpu/drm/imx/imx-drm.h
@@ -38,7 +38,6 @@ int imx_drm_encoder_parse_of(struct drm_device *drm,
 	struct drm_encoder *encoder, struct device_node *np);
 
 void imx_drm_connector_destroy(struct drm_connector *connector);
-void imx_drm_encoder_destroy(struct drm_encoder *encoder);
 
 int ipu_planes_assign_pre(struct drm_device *dev,
 			  struct drm_atomic_state *state);
diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c
index 4da22a94790c..66ea68e8da87 100644
--- a/drivers/gpu/drm/imx/imx-ldb.c
+++ b/drivers/gpu/drm/imx/imx-ldb.c
@@ -26,6 +26,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "imx-drm.h"
 
@@ -393,10 +394,6 @@ static const struct drm_connector_helper_funcs imx_ldb_connector_helper_funcs =
 	.best_encoder = imx_ldb_connector_best_encoder,
 };
 
-static const struct drm_encoder_funcs imx_ldb_encoder_funcs = {
-	.destroy = imx_drm_encoder_destroy,
-};
-
 static const struct drm_encoder_helper_funcs imx_ldb_encoder_helper_funcs = {
 	.atomic_mode_set = imx_ldb_encoder_atomic_mode_set,
 	.enable = imx_ldb_encoder_enable,
@@ -441,8 +438,7 @@ static int imx_ldb_register(struct drm_device *drm,
 	}
 
 	drm_encoder_helper_add(encoder, &imx_ldb_encoder_helper_funcs);
-	drm_encoder_init(drm, encoder, &imx_ldb_encoder_funcs,
-			 DRM_MODE_ENCODER_LVDS, NULL);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_LVDS);
 
 	if (imx_ldb_ch->bridge) {
 		ret = drm_bridge_attach(&imx_ldb_ch->encoder,
diff --git a/drivers/gpu/drm/imx/imx-tve.c b/drivers/gpu/drm/imx/imx-tve.c
index 5bbfaa2cd0f4..ee63782c77e9 100644
--- a/drivers/gpu/drm/imx/imx-tve.c
+++ b/drivers/gpu/drm/imx/imx-tve.c
@@ -21,6 +21,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "imx-drm.h"
 
@@ -348,10 +349,6 @@ static const struct drm_connector_helper_funcs imx_tve_connector_helper_funcs =
 	.mode_valid = imx_tve_connector_mode_valid,
 };
 
-static const struct drm_encoder_funcs imx_tve_encoder_funcs = {
-	.destroy = imx_drm_encoder_destroy,
-};
-
 static const struct drm_encoder_helper_funcs imx_tve_encoder_helper_funcs = {
 	.mode_set = imx_tve_encoder_mode_set,
 	.enable = imx_tve_encoder_enable,
@@ -479,8 +476,7 @@ static int imx_tve_register(struct drm_device *drm, struct imx_tve *tve)
 		return ret;
 
 	drm_encoder_helper_add(&tve->encoder, &imx_tve_encoder_helper_funcs);
-	drm_encoder_init(drm, &tve->encoder, &imx_tve_encoder_funcs,
-			 encoder_type, NULL);
+	drm_simple_encoder_init(drm, &tve->encoder, encoder_type);
 
 	drm_connector_helper_add(&tve->connector,
 			&imx_tve_connector_helper_funcs);
diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
index 08fafa4bf8c2..4465e9c602f8 100644
--- a/drivers/gpu/drm/imx/parallel-display.c
+++ b/drivers/gpu/drm/imx/parallel-display.c
@@ -18,6 +18,7 @@
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "imx-drm.h"
 
@@ -216,7 +217,7 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
 
 	if (next_bridge_state)
 		bus_flags = next_bridge_state->input_bus_cfg.flags;
-	else if (!imxpd->bus_format && di->num_bus_formats)
+	else if (di->num_bus_formats)
 		bus_flags = di->bus_flags;
 	else
 		bus_flags = imxpd->bus_flags;
@@ -256,10 +257,6 @@ static const struct drm_connector_helper_funcs imx_pd_connector_helper_funcs = {
 	.best_encoder = imx_pd_connector_best_encoder,
 };
 
-static const struct drm_encoder_funcs imx_pd_encoder_funcs = {
-	.destroy = imx_drm_encoder_destroy,
-};
-
 static const struct drm_bridge_funcs imx_pd_bridge_funcs = {
 	.enable = imx_pd_bridge_enable,
 	.disable = imx_pd_bridge_disable,
@@ -288,8 +285,7 @@ static int imx_pd_register(struct drm_device *drm,
 	 */
 	imxpd->connector.dpms = DRM_MODE_DPMS_OFF;
 
-	drm_encoder_init(drm, encoder, &imx_pd_encoder_funcs,
-			 DRM_MODE_ENCODER_NONE, NULL);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_NONE);
 
 	imxpd->bridge.funcs = &imx_pd_bridge_funcs;
 	drm_bridge_attach(encoder, &imxpd->bridge, NULL, 0);
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.c b/drivers/gpu/drm/ingenic/ingenic-drm.c
index 9dfe7cb530e1..632d72177123 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.c
@@ -23,11 +23,13 @@
 #include <drm/drm_fourcc.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_irq.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_plane.h>
 #include <drm/drm_plane_helper.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 #include <drm/drm_vblank.h>
 
 #define JZ_REG_LCD_CFG				0x00
@@ -488,15 +490,6 @@ static irqreturn_t ingenic_drm_irq_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-static void ingenic_drm_release(struct drm_device *drm)
-{
-	struct ingenic_drm *priv = drm_device_get_priv(drm);
-
-	drm_mode_config_cleanup(drm);
-	drm_dev_fini(drm);
-	kfree(priv);
-}
-
 static int ingenic_drm_enable_vblank(struct drm_crtc *crtc)
 {
 	struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
@@ -540,7 +533,6 @@ static struct drm_driver ingenic_drm_driver_data = {
 	.gem_prime_mmap		= drm_gem_cma_prime_mmap,
 
 	.irq_handler		= ingenic_drm_irq_handler,
-	.release		= ingenic_drm_release,
 };
 
 static const struct drm_plane_funcs ingenic_drm_primary_plane_funcs = {
@@ -592,10 +584,6 @@ static const struct drm_mode_config_funcs ingenic_drm_mode_config_funcs = {
 	.atomic_commit		= drm_atomic_helper_commit,
 };
 
-static const struct drm_encoder_funcs ingenic_drm_encoder_funcs = {
-	.destroy		= drm_encoder_cleanup,
-};
-
 static void ingenic_drm_free_dma_hwdesc(void *d)
 {
 	struct ingenic_drm *priv = d;
@@ -623,24 +611,21 @@ static int ingenic_drm_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
+	priv = devm_drm_dev_alloc(dev, &ingenic_drm_driver_data,
+				  struct ingenic_drm, drm);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
 
 	priv->soc_info = soc_info;
 	priv->dev = dev;
 	drm = &priv->drm;
-	drm->dev_private = priv;
 
 	platform_set_drvdata(pdev, priv);
 
-	ret = devm_drm_dev_init(dev, drm, &ingenic_drm_driver_data);
-	if (ret) {
-		kfree(priv);
+	ret = drmm_mode_config_init(drm);
+	if (ret)
 		return ret;
-	}
 
-	drm_mode_config_init(drm);
 	drm->mode_config.min_width = 0;
 	drm->mode_config.min_height = 0;
 	drm->mode_config.max_width = soc_info->max_width;
@@ -661,10 +646,8 @@ static int ingenic_drm_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "Failed to get platform irq");
+	if (irq < 0)
 		return irq;
-	}
 
 	if (soc_info->needs_dev_clk) {
 		priv->lcd_clk = devm_clk_get(dev, "lcd");
@@ -730,8 +713,8 @@ static int ingenic_drm_probe(struct platform_device *pdev)
 	drm_encoder_helper_add(&priv->encoder,
 			       &ingenic_drm_encoder_helper_funcs);
 
-	ret = drm_encoder_init(drm, &priv->encoder, &ingenic_drm_encoder_funcs,
-			       DRM_MODE_ENCODER_DPI, NULL);
+	ret = drm_simple_encoder_init(drm, &priv->encoder,
+				      DRM_MODE_ENCODER_DPI);
 	if (ret) {
 		dev_err(dev, "Failed to init encoder: %i", ret);
 		return ret;
@@ -791,9 +774,7 @@ static int ingenic_drm_probe(struct platform_device *pdev)
 		goto err_devclk_disable;
 	}
 
-	ret = drm_fbdev_generic_setup(drm, 32);
-	if (ret)
-		dev_warn(dev, "Unable to start fbdev emulation: %i", ret);
+	drm_fbdev_generic_setup(drm, 32);
 
 	return 0;
 
diff --git a/drivers/gpu/drm/lima/Kconfig b/drivers/gpu/drm/lima/Kconfig
index d589f09d04d9..fa1d4f5df31e 100644
--- a/drivers/gpu/drm/lima/Kconfig
+++ b/drivers/gpu/drm/lima/Kconfig
@@ -10,5 +10,7 @@ config DRM_LIMA
        depends on OF
        select DRM_SCHED
        select DRM_GEM_SHMEM_HELPER
+       select PM_DEVFREQ
+       select DEVFREQ_GOV_SIMPLE_ONDEMAND
        help
 	 DRM driver for ARM Mali 400/450 GPUs.
diff --git a/drivers/gpu/drm/lima/Makefile b/drivers/gpu/drm/lima/Makefile
index a85444b0a1d4..ca2097b8e1ad 100644
--- a/drivers/gpu/drm/lima/Makefile
+++ b/drivers/gpu/drm/lima/Makefile
@@ -14,6 +14,8 @@ lima-y := \
 	lima_sched.o \
 	lima_ctx.o \
 	lima_dlbu.o \
-	lima_bcast.o
+	lima_bcast.o \
+	lima_trace.o \
+	lima_devfreq.o
 
 obj-$(CONFIG_DRM_LIMA) += lima.o
diff --git a/drivers/gpu/drm/lima/lima_bcast.c b/drivers/gpu/drm/lima/lima_bcast.c
index 288398027bfa..fbc43f243c54 100644
--- a/drivers/gpu/drm/lima/lima_bcast.c
+++ b/drivers/gpu/drm/lima/lima_bcast.c
@@ -26,18 +26,33 @@ void lima_bcast_enable(struct lima_device *dev, int num_pp)
 	bcast_write(LIMA_BCAST_BROADCAST_MASK, mask);
 }
 
+static int lima_bcast_hw_init(struct lima_ip *ip)
+{
+	bcast_write(LIMA_BCAST_BROADCAST_MASK, ip->data.mask << 16);
+	bcast_write(LIMA_BCAST_INTERRUPT_MASK, ip->data.mask);
+	return 0;
+}
+
+int lima_bcast_resume(struct lima_ip *ip)
+{
+	return lima_bcast_hw_init(ip);
+}
+
+void lima_bcast_suspend(struct lima_ip *ip)
+{
+
+}
+
 int lima_bcast_init(struct lima_ip *ip)
 {
-	int i, mask = 0;
+	int i;
 
 	for (i = lima_ip_pp0; i <= lima_ip_pp7; i++) {
 		if (ip->dev->ip[i].present)
-			mask |= 1 << (i - lima_ip_pp0);
+			ip->data.mask |= 1 << (i - lima_ip_pp0);
 	}
 
-	bcast_write(LIMA_BCAST_BROADCAST_MASK, mask << 16);
-	bcast_write(LIMA_BCAST_INTERRUPT_MASK, mask);
-	return 0;
+	return lima_bcast_hw_init(ip);
 }
 
 void lima_bcast_fini(struct lima_ip *ip)
diff --git a/drivers/gpu/drm/lima/lima_bcast.h b/drivers/gpu/drm/lima/lima_bcast.h
index c47e58563d0a..465ee587bceb 100644
--- a/drivers/gpu/drm/lima/lima_bcast.h
+++ b/drivers/gpu/drm/lima/lima_bcast.h
@@ -6,6 +6,8 @@
 
 struct lima_ip;
 
+int lima_bcast_resume(struct lima_ip *ip);
+void lima_bcast_suspend(struct lima_ip *ip);
 int lima_bcast_init(struct lima_ip *ip);
 void lima_bcast_fini(struct lima_ip *ip);
 
diff --git a/drivers/gpu/drm/lima/lima_ctx.c b/drivers/gpu/drm/lima/lima_ctx.c
index 22fff6caa961..891d5cd5019a 100644
--- a/drivers/gpu/drm/lima/lima_ctx.c
+++ b/drivers/gpu/drm/lima/lima_ctx.c
@@ -27,6 +27,9 @@ int lima_ctx_create(struct lima_device *dev, struct lima_ctx_mgr *mgr, u32 *id)
 	if (err < 0)
 		goto err_out0;
 
+	ctx->pid = task_pid_nr(current);
+	get_task_comm(ctx->pname, current);
+
 	return 0;
 
 err_out0:
diff --git a/drivers/gpu/drm/lima/lima_ctx.h b/drivers/gpu/drm/lima/lima_ctx.h
index 6154e5c9bfe4..74e2be09090f 100644
--- a/drivers/gpu/drm/lima/lima_ctx.h
+++ b/drivers/gpu/drm/lima/lima_ctx.h
@@ -5,6 +5,7 @@
 #define __LIMA_CTX_H__
 
 #include <linux/xarray.h>
+#include <linux/sched.h>
 
 #include "lima_device.h"
 
@@ -13,6 +14,10 @@ struct lima_ctx {
 	struct lima_device *dev;
 	struct lima_sched_context context[lima_pipe_num];
 	atomic_t guilty;
+
+	/* debug info */
+	char pname[TASK_COMM_LEN];
+	pid_t pid;
 };
 
 struct lima_ctx_mgr {
diff --git a/drivers/gpu/drm/lima/lima_devfreq.c b/drivers/gpu/drm/lima/lima_devfreq.c
new file mode 100644
index 000000000000..bbe02817721b
--- /dev/null
+++ b/drivers/gpu/drm/lima/lima_devfreq.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * Based on panfrost_devfreq.c:
+ *   Copyright 2019 Collabora ltd.
+ */
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/devfreq_cooling.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/property.h>
+
+#include "lima_device.h"
+#include "lima_devfreq.h"
+
+static void lima_devfreq_update_utilization(struct lima_devfreq *devfreq)
+{
+	ktime_t now, last;
+
+	now = ktime_get();
+	last = devfreq->time_last_update;
+
+	if (devfreq->busy_count > 0)
+		devfreq->busy_time += ktime_sub(now, last);
+	else
+		devfreq->idle_time += ktime_sub(now, last);
+
+	devfreq->time_last_update = now;
+}
+
+static int lima_devfreq_target(struct device *dev, unsigned long *freq,
+			       u32 flags)
+{
+	struct dev_pm_opp *opp;
+	int err;
+
+	opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(opp))
+		return PTR_ERR(opp);
+	dev_pm_opp_put(opp);
+
+	err = dev_pm_opp_set_rate(dev, *freq);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static void lima_devfreq_reset(struct lima_devfreq *devfreq)
+{
+	devfreq->busy_time = 0;
+	devfreq->idle_time = 0;
+	devfreq->time_last_update = ktime_get();
+}
+
+static int lima_devfreq_get_dev_status(struct device *dev,
+				       struct devfreq_dev_status *status)
+{
+	struct lima_device *ldev = dev_get_drvdata(dev);
+	struct lima_devfreq *devfreq = &ldev->devfreq;
+	unsigned long irqflags;
+
+	status->current_frequency = clk_get_rate(ldev->clk_gpu);
+
+	spin_lock_irqsave(&devfreq->lock, irqflags);
+
+	lima_devfreq_update_utilization(devfreq);
+
+	status->total_time = ktime_to_ns(ktime_add(devfreq->busy_time,
+						   devfreq->idle_time));
+	status->busy_time = ktime_to_ns(devfreq->busy_time);
+
+	lima_devfreq_reset(devfreq);
+
+	spin_unlock_irqrestore(&devfreq->lock, irqflags);
+
+	dev_dbg(ldev->dev, "busy %lu total %lu %lu %% freq %lu MHz\n",
+		status->busy_time, status->total_time,
+		status->busy_time / (status->total_time / 100),
+		status->current_frequency / 1000 / 1000);
+
+	return 0;
+}
+
+static struct devfreq_dev_profile lima_devfreq_profile = {
+	.polling_ms = 50, /* ~3 frames */
+	.target = lima_devfreq_target,
+	.get_dev_status = lima_devfreq_get_dev_status,
+};
+
+void lima_devfreq_fini(struct lima_device *ldev)
+{
+	struct lima_devfreq *devfreq = &ldev->devfreq;
+
+	if (devfreq->cooling) {
+		devfreq_cooling_unregister(devfreq->cooling);
+		devfreq->cooling = NULL;
+	}
+
+	if (devfreq->devfreq) {
+		devm_devfreq_remove_device(ldev->dev, devfreq->devfreq);
+		devfreq->devfreq = NULL;
+	}
+
+	if (devfreq->opp_of_table_added) {
+		dev_pm_opp_of_remove_table(ldev->dev);
+		devfreq->opp_of_table_added = false;
+	}
+
+	if (devfreq->regulators_opp_table) {
+		dev_pm_opp_put_regulators(devfreq->regulators_opp_table);
+		devfreq->regulators_opp_table = NULL;
+	}
+
+	if (devfreq->clkname_opp_table) {
+		dev_pm_opp_put_clkname(devfreq->clkname_opp_table);
+		devfreq->clkname_opp_table = NULL;
+	}
+}
+
+int lima_devfreq_init(struct lima_device *ldev)
+{
+	struct thermal_cooling_device *cooling;
+	struct device *dev = ldev->dev;
+	struct opp_table *opp_table;
+	struct devfreq *devfreq;
+	struct lima_devfreq *ldevfreq = &ldev->devfreq;
+	struct dev_pm_opp *opp;
+	unsigned long cur_freq;
+	int ret;
+
+	if (!device_property_present(dev, "operating-points-v2"))
+		/* Optional, continue without devfreq */
+		return 0;
+
+	spin_lock_init(&ldevfreq->lock);
+
+	opp_table = dev_pm_opp_set_clkname(dev, "core");
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+		goto err_fini;
+	}
+
+	ldevfreq->clkname_opp_table = opp_table;
+
+	opp_table = dev_pm_opp_set_regulators(dev,
+					      (const char *[]){ "mali" },
+					      1);
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+
+		/* Continue if the optional regulator is missing */
+		if (ret != -ENODEV)
+			goto err_fini;
+	} else {
+		ldevfreq->regulators_opp_table = opp_table;
+	}
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret)
+		goto err_fini;
+	ldevfreq->opp_of_table_added = true;
+
+	lima_devfreq_reset(ldevfreq);
+
+	cur_freq = clk_get_rate(ldev->clk_gpu);
+
+	opp = devfreq_recommended_opp(dev, &cur_freq, 0);
+	if (IS_ERR(opp)) {
+		ret = PTR_ERR(opp);
+		goto err_fini;
+	}
+
+	lima_devfreq_profile.initial_freq = cur_freq;
+	dev_pm_opp_put(opp);
+
+	devfreq = devm_devfreq_add_device(dev, &lima_devfreq_profile,
+					  DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
+	if (IS_ERR(devfreq)) {
+		dev_err(dev, "Couldn't initialize GPU devfreq\n");
+		ret = PTR_ERR(devfreq);
+		goto err_fini;
+	}
+
+	ldevfreq->devfreq = devfreq;
+
+	cooling = of_devfreq_cooling_register(dev->of_node, devfreq);
+	if (IS_ERR(cooling))
+		dev_info(dev, "Failed to register cooling device\n");
+	else
+		ldevfreq->cooling = cooling;
+
+	return 0;
+
+err_fini:
+	lima_devfreq_fini(ldev);
+	return ret;
+}
+
+void lima_devfreq_record_busy(struct lima_devfreq *devfreq)
+{
+	unsigned long irqflags;
+
+	if (!devfreq->devfreq)
+		return;
+
+	spin_lock_irqsave(&devfreq->lock, irqflags);
+
+	lima_devfreq_update_utilization(devfreq);
+
+	devfreq->busy_count++;
+
+	spin_unlock_irqrestore(&devfreq->lock, irqflags);
+}
+
+void lima_devfreq_record_idle(struct lima_devfreq *devfreq)
+{
+	unsigned long irqflags;
+
+	if (!devfreq->devfreq)
+		return;
+
+	spin_lock_irqsave(&devfreq->lock, irqflags);
+
+	lima_devfreq_update_utilization(devfreq);
+
+	WARN_ON(--devfreq->busy_count < 0);
+
+	spin_unlock_irqrestore(&devfreq->lock, irqflags);
+}
+
+int lima_devfreq_resume(struct lima_devfreq *devfreq)
+{
+	unsigned long irqflags;
+
+	if (!devfreq->devfreq)
+		return 0;
+
+	spin_lock_irqsave(&devfreq->lock, irqflags);
+
+	lima_devfreq_reset(devfreq);
+
+	spin_unlock_irqrestore(&devfreq->lock, irqflags);
+
+	return devfreq_resume_device(devfreq->devfreq);
+}
+
+int lima_devfreq_suspend(struct lima_devfreq *devfreq)
+{
+	if (!devfreq->devfreq)
+		return 0;
+
+	return devfreq_suspend_device(devfreq->devfreq);
+}
diff --git a/drivers/gpu/drm/lima/lima_devfreq.h b/drivers/gpu/drm/lima/lima_devfreq.h
new file mode 100644
index 000000000000..5eed2975a375
--- /dev/null
+++ b/drivers/gpu/drm/lima/lima_devfreq.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com> */
+
+#ifndef __LIMA_DEVFREQ_H__
+#define __LIMA_DEVFREQ_H__
+
+#include <linux/spinlock.h>
+#include <linux/ktime.h>
+
+struct devfreq;
+struct opp_table;
+struct thermal_cooling_device;
+
+struct lima_device;
+
+struct lima_devfreq {
+	struct devfreq *devfreq;
+	struct opp_table *clkname_opp_table;
+	struct opp_table *regulators_opp_table;
+	struct thermal_cooling_device *cooling;
+	bool opp_of_table_added;
+
+	ktime_t busy_time;
+	ktime_t idle_time;
+	ktime_t time_last_update;
+	int busy_count;
+	/*
+	 * Protect busy_time, idle_time, time_last_update and busy_count
+	 * because these can be updated concurrently, for example by the GP
+	 * and PP interrupts.
+	 */
+	spinlock_t lock;
+};
+
+int lima_devfreq_init(struct lima_device *ldev);
+void lima_devfreq_fini(struct lima_device *ldev);
+
+void lima_devfreq_record_busy(struct lima_devfreq *devfreq);
+void lima_devfreq_record_idle(struct lima_devfreq *devfreq);
+
+int lima_devfreq_resume(struct lima_devfreq *devfreq);
+int lima_devfreq_suspend(struct lima_devfreq *devfreq);
+
+#endif
diff --git a/drivers/gpu/drm/lima/lima_device.c b/drivers/gpu/drm/lima/lima_device.c
index 19829b543024..65fdca366e41 100644
--- a/drivers/gpu/drm/lima/lima_device.c
+++ b/drivers/gpu/drm/lima/lima_device.c
@@ -25,6 +25,8 @@ struct lima_ip_desc {
 
 	int (*init)(struct lima_ip *ip);
 	void (*fini)(struct lima_ip *ip);
+	int (*resume)(struct lima_ip *ip);
+	void (*suspend)(struct lima_ip *ip);
 };
 
 #define LIMA_IP_DESC(ipname, mst0, mst1, off0, off1, func, irq) \
@@ -41,6 +43,8 @@ struct lima_ip_desc {
 		}, \
 		.init = lima_##func##_init, \
 		.fini = lima_##func##_fini, \
+		.resume = lima_##func##_resume, \
+		.suspend = lima_##func##_suspend, \
 	}
 
 static struct lima_ip_desc lima_ip_desc[lima_ip_num] = {
@@ -77,26 +81,10 @@ const char *lima_ip_name(struct lima_ip *ip)
 	return lima_ip_desc[ip->id].name;
 }
 
-static int lima_clk_init(struct lima_device *dev)
+static int lima_clk_enable(struct lima_device *dev)
 {
 	int err;
 
-	dev->clk_bus = devm_clk_get(dev->dev, "bus");
-	if (IS_ERR(dev->clk_bus)) {
-		err = PTR_ERR(dev->clk_bus);
-		if (err != -EPROBE_DEFER)
-			dev_err(dev->dev, "get bus clk failed %d\n", err);
-		return err;
-	}
-
-	dev->clk_gpu = devm_clk_get(dev->dev, "core");
-	if (IS_ERR(dev->clk_gpu)) {
-		err = PTR_ERR(dev->clk_gpu);
-		if (err != -EPROBE_DEFER)
-			dev_err(dev->dev, "get core clk failed %d\n", err);
-		return err;
-	}
-
 	err = clk_prepare_enable(dev->clk_bus);
 	if (err)
 		return err;
@@ -105,15 +93,7 @@ static int lima_clk_init(struct lima_device *dev)
 	if (err)
 		goto error_out0;
 
-	dev->reset = devm_reset_control_array_get_optional_shared(dev->dev);
-
-	if (IS_ERR(dev->reset)) {
-		err = PTR_ERR(dev->reset);
-		if (err != -EPROBE_DEFER)
-			dev_err(dev->dev, "get reset controller failed %d\n",
-				err);
-		goto error_out1;
-	} else if (dev->reset != NULL) {
+	if (dev->reset) {
 		err = reset_control_deassert(dev->reset);
 		if (err) {
 			dev_err(dev->dev,
@@ -131,14 +111,76 @@ static int lima_clk_init(struct lima_device *dev)
 	return err;
 }
 
-static void lima_clk_fini(struct lima_device *dev)
+static void lima_clk_disable(struct lima_device *dev)
 {
-	if (dev->reset != NULL)
+	if (dev->reset)
 		reset_control_assert(dev->reset);
 	clk_disable_unprepare(dev->clk_gpu);
 	clk_disable_unprepare(dev->clk_bus);
 }
 
+static int lima_clk_init(struct lima_device *dev)
+{
+	int err;
+
+	dev->clk_bus = devm_clk_get(dev->dev, "bus");
+	if (IS_ERR(dev->clk_bus)) {
+		err = PTR_ERR(dev->clk_bus);
+		if (err != -EPROBE_DEFER)
+			dev_err(dev->dev, "get bus clk failed %d\n", err);
+		dev->clk_bus = NULL;
+		return err;
+	}
+
+	dev->clk_gpu = devm_clk_get(dev->dev, "core");
+	if (IS_ERR(dev->clk_gpu)) {
+		err = PTR_ERR(dev->clk_gpu);
+		if (err != -EPROBE_DEFER)
+			dev_err(dev->dev, "get core clk failed %d\n", err);
+		dev->clk_gpu = NULL;
+		return err;
+	}
+
+	dev->reset = devm_reset_control_array_get_optional_shared(dev->dev);
+	if (IS_ERR(dev->reset)) {
+		err = PTR_ERR(dev->reset);
+		if (err != -EPROBE_DEFER)
+			dev_err(dev->dev, "get reset controller failed %d\n",
+				err);
+		dev->reset = NULL;
+		return err;
+	}
+
+	return lima_clk_enable(dev);
+}
+
+static void lima_clk_fini(struct lima_device *dev)
+{
+	lima_clk_disable(dev);
+}
+
+static int lima_regulator_enable(struct lima_device *dev)
+{
+	int ret;
+
+	if (!dev->regulator)
+		return 0;
+
+	ret = regulator_enable(dev->regulator);
+	if (ret < 0) {
+		dev_err(dev->dev, "failed to enable regulator: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void lima_regulator_disable(struct lima_device *dev)
+{
+	if (dev->regulator)
+		regulator_disable(dev->regulator);
+}
+
 static int lima_regulator_init(struct lima_device *dev)
 {
 	int ret;
@@ -154,25 +196,20 @@ static int lima_regulator_init(struct lima_device *dev)
 		return ret;
 	}
 
-	ret = regulator_enable(dev->regulator);
-	if (ret < 0) {
-		dev_err(dev->dev, "failed to enable regulator: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
+	return lima_regulator_enable(dev);
 }
 
 static void lima_regulator_fini(struct lima_device *dev)
 {
-	if (dev->regulator)
-		regulator_disable(dev->regulator);
+	lima_regulator_disable(dev);
 }
 
 static int lima_init_ip(struct lima_device *dev, int index)
 {
+	struct platform_device *pdev = to_platform_device(dev->dev);
 	struct lima_ip_desc *desc = lima_ip_desc + index;
 	struct lima_ip *ip = dev->ip + index;
+	const char *irq_name = desc->irq_name;
 	int offset = desc->offset[dev->id];
 	bool must = desc->must_have[dev->id];
 	int err;
@@ -183,8 +220,9 @@ static int lima_init_ip(struct lima_device *dev, int index)
 	ip->dev = dev;
 	ip->id = index;
 	ip->iomem = dev->iomem + offset;
-	if (desc->irq_name) {
-		err = platform_get_irq_byname(dev->pdev, desc->irq_name);
+	if (irq_name) {
+		err = must ? platform_get_irq_byname(pdev, irq_name) :
+			     platform_get_irq_byname_optional(pdev, irq_name);
 		if (err < 0)
 			goto out;
 		ip->irq = err;
@@ -209,11 +247,34 @@ static void lima_fini_ip(struct lima_device *ldev, int index)
 		desc->fini(ip);
 }
 
+static int lima_resume_ip(struct lima_device *ldev, int index)
+{
+	struct lima_ip_desc *desc = lima_ip_desc + index;
+	struct lima_ip *ip = ldev->ip + index;
+	int ret = 0;
+
+	if (ip->present)
+		ret = desc->resume(ip);
+
+	return ret;
+}
+
+static void lima_suspend_ip(struct lima_device *ldev, int index)
+{
+	struct lima_ip_desc *desc = lima_ip_desc + index;
+	struct lima_ip *ip = ldev->ip + index;
+
+	if (ip->present)
+		desc->suspend(ip);
+}
+
 static int lima_init_gp_pipe(struct lima_device *dev)
 {
 	struct lima_sched_pipe *pipe = dev->pipe + lima_pipe_gp;
 	int err;
 
+	pipe->ldev = dev;
+
 	err = lima_sched_pipe_init(pipe, "gp");
 	if (err)
 		return err;
@@ -244,6 +305,8 @@ static int lima_init_pp_pipe(struct lima_device *dev)
 	struct lima_sched_pipe *pipe = dev->pipe + lima_pipe_pp;
 	int err, i;
 
+	pipe->ldev = dev;
+
 	err = lima_sched_pipe_init(pipe, "pp");
 	if (err)
 		return err;
@@ -290,8 +353,8 @@ static void lima_fini_pp_pipe(struct lima_device *dev)
 
 int lima_device_init(struct lima_device *ldev)
 {
+	struct platform_device *pdev = to_platform_device(ldev->dev);
 	int err, i;
-	struct resource *res;
 
 	dma_set_coherent_mask(ldev->dev, DMA_BIT_MASK(32));
 
@@ -322,8 +385,7 @@ int lima_device_init(struct lima_device *ldev)
 	} else
 		ldev->va_end = LIMA_VA_RESERVE_END;
 
-	res = platform_get_resource(ldev->pdev, IORESOURCE_MEM, 0);
-	ldev->iomem = devm_ioremap_resource(ldev->dev, res);
+	ldev->iomem = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(ldev->iomem)) {
 		dev_err(ldev->dev, "fail to ioremap iomem\n");
 		err = PTR_ERR(ldev->iomem);
@@ -344,6 +406,12 @@ int lima_device_init(struct lima_device *ldev)
 	if (err)
 		goto err_out5;
 
+	ldev->dump.magic = LIMA_DUMP_MAGIC;
+	ldev->dump.version_major = LIMA_DUMP_MAJOR;
+	ldev->dump.version_minor = LIMA_DUMP_MINOR;
+	INIT_LIST_HEAD(&ldev->error_task_list);
+	mutex_init(&ldev->error_task_list_lock);
+
 	dev_info(ldev->dev, "bus rate = %lu\n", clk_get_rate(ldev->clk_bus));
 	dev_info(ldev->dev, "mod rate = %lu", clk_get_rate(ldev->clk_gpu));
 
@@ -370,6 +438,13 @@ int lima_device_init(struct lima_device *ldev)
 void lima_device_fini(struct lima_device *ldev)
 {
 	int i;
+	struct lima_sched_error_task *et, *tmp;
+
+	list_for_each_entry_safe(et, tmp, &ldev->error_task_list, list) {
+		list_del(&et->list);
+		kvfree(et);
+	}
+	mutex_destroy(&ldev->error_task_list_lock);
 
 	lima_fini_pp_pipe(ldev);
 	lima_fini_gp_pipe(ldev);
@@ -387,3 +462,72 @@ void lima_device_fini(struct lima_device *ldev)
 
 	lima_clk_fini(ldev);
 }
+
+int lima_device_resume(struct device *dev)
+{
+	struct lima_device *ldev = dev_get_drvdata(dev);
+	int i, err;
+
+	err = lima_clk_enable(ldev);
+	if (err) {
+		dev_err(dev, "resume clk fail %d\n", err);
+		return err;
+	}
+
+	err = lima_regulator_enable(ldev);
+	if (err) {
+		dev_err(dev, "resume regulator fail %d\n", err);
+		goto err_out0;
+	}
+
+	for (i = 0; i < lima_ip_num; i++) {
+		err = lima_resume_ip(ldev, i);
+		if (err) {
+			dev_err(dev, "resume ip %d fail\n", i);
+			goto err_out1;
+		}
+	}
+
+	err = lima_devfreq_resume(&ldev->devfreq);
+	if (err) {
+		dev_err(dev, "devfreq resume fail\n");
+		goto err_out1;
+	}
+
+	return 0;
+
+err_out1:
+	while (--i >= 0)
+		lima_suspend_ip(ldev, i);
+	lima_regulator_disable(ldev);
+err_out0:
+	lima_clk_disable(ldev);
+	return err;
+}
+
+int lima_device_suspend(struct device *dev)
+{
+	struct lima_device *ldev = dev_get_drvdata(dev);
+	int i, err;
+
+	/* check any task running */
+	for (i = 0; i < lima_pipe_num; i++) {
+		if (atomic_read(&ldev->pipe[i].base.hw_rq_count))
+			return -EBUSY;
+	}
+
+	err = lima_devfreq_suspend(&ldev->devfreq);
+	if (err) {
+		dev_err(dev, "devfreq suspend fail\n");
+		return err;
+	}
+
+	for (i = lima_ip_num - 1; i >= 0; i--)
+		lima_suspend_ip(ldev, i);
+
+	lima_regulator_disable(ldev);
+
+	lima_clk_disable(ldev);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/lima/lima_device.h b/drivers/gpu/drm/lima/lima_device.h
index 31158d86271c..41b9d7b4bcc7 100644
--- a/drivers/gpu/drm/lima/lima_device.h
+++ b/drivers/gpu/drm/lima/lima_device.h
@@ -6,8 +6,12 @@
 
 #include <drm/drm_device.h>
 #include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
 
 #include "lima_sched.h"
+#include "lima_dump.h"
+#include "lima_devfreq.h"
 
 enum lima_gpu_id {
 	lima_gpu_mali400 = 0,
@@ -60,6 +64,8 @@ struct lima_ip {
 		bool async_reset;
 		/* l2 cache */
 		spinlock_t lock;
+		/* pmu/bcast */
+		u32 mask;
 	} data;
 };
 
@@ -72,7 +78,6 @@ enum lima_pipe_id {
 struct lima_device {
 	struct device *dev;
 	struct drm_device *ddev;
-	struct platform_device *pdev;
 
 	enum lima_gpu_id id;
 	u32 gp_version;
@@ -94,6 +99,13 @@ struct lima_device {
 
 	u32 *dlbu_cpu;
 	dma_addr_t dlbu_dma;
+
+	struct lima_devfreq devfreq;
+
+	/* debug info */
+	struct lima_dump_head dump;
+	struct list_head error_task_list;
+	struct mutex error_task_list_lock;
 };
 
 static inline struct lima_device *
@@ -128,4 +140,7 @@ static inline int lima_poll_timeout(struct lima_ip *ip, lima_poll_func_t func,
 	return 0;
 }
 
+int lima_device_suspend(struct device *dev);
+int lima_device_resume(struct device *dev);
+
 #endif
diff --git a/drivers/gpu/drm/lima/lima_dlbu.c b/drivers/gpu/drm/lima/lima_dlbu.c
index 8399ceffb94b..c1d5ea35daa7 100644
--- a/drivers/gpu/drm/lima/lima_dlbu.c
+++ b/drivers/gpu/drm/lima/lima_dlbu.c
@@ -42,7 +42,7 @@ void lima_dlbu_set_reg(struct lima_ip *ip, u32 *reg)
 	dlbu_write(LIMA_DLBU_START_TILE_POS, reg[3]);
 }
 
-int lima_dlbu_init(struct lima_ip *ip)
+static int lima_dlbu_hw_init(struct lima_ip *ip)
 {
 	struct lima_device *dev = ip->dev;
 
@@ -52,6 +52,21 @@ int lima_dlbu_init(struct lima_ip *ip)
 	return 0;
 }
 
+int lima_dlbu_resume(struct lima_ip *ip)
+{
+	return lima_dlbu_hw_init(ip);
+}
+
+void lima_dlbu_suspend(struct lima_ip *ip)
+{
+
+}
+
+int lima_dlbu_init(struct lima_ip *ip)
+{
+	return lima_dlbu_hw_init(ip);
+}
+
 void lima_dlbu_fini(struct lima_ip *ip)
 {
 
diff --git a/drivers/gpu/drm/lima/lima_dlbu.h b/drivers/gpu/drm/lima/lima_dlbu.h
index 16f877984466..be71daaaee89 100644
--- a/drivers/gpu/drm/lima/lima_dlbu.h
+++ b/drivers/gpu/drm/lima/lima_dlbu.h
@@ -12,6 +12,8 @@ void lima_dlbu_disable(struct lima_device *dev);
 
 void lima_dlbu_set_reg(struct lima_ip *ip, u32 *reg);
 
+int lima_dlbu_resume(struct lima_ip *ip);
+void lima_dlbu_suspend(struct lima_ip *ip);
 int lima_dlbu_init(struct lima_ip *ip);
 void lima_dlbu_fini(struct lima_ip *ip);
 
diff --git a/drivers/gpu/drm/lima/lima_drv.c b/drivers/gpu/drm/lima/lima_drv.c
index 2daac64d8955..a831565af813 100644
--- a/drivers/gpu/drm/lima/lima_drv.c
+++ b/drivers/gpu/drm/lima/lima_drv.c
@@ -5,17 +5,20 @@
 #include <linux/of_platform.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <drm/drm_ioctl.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_prime.h>
 #include <drm/lima_drm.h>
 
+#include "lima_device.h"
 #include "lima_drv.h"
 #include "lima_gem.h"
 #include "lima_vm.h"
 
 int lima_sched_timeout_ms;
 uint lima_heap_init_nr_pages = 8;
+uint lima_max_error_tasks;
 
 MODULE_PARM_DESC(sched_timeout_ms, "task run timeout in ms");
 module_param_named(sched_timeout_ms, lima_sched_timeout_ms, int, 0444);
@@ -23,6 +26,9 @@ module_param_named(sched_timeout_ms, lima_sched_timeout_ms, int, 0444);
 MODULE_PARM_DESC(heap_init_nr_pages, "heap buffer init number of pages");
 module_param_named(heap_init_nr_pages, lima_heap_init_nr_pages, uint, 0444);
 
+MODULE_PARM_DESC(max_error_tasks, "max number of error tasks to save");
+module_param_named(max_error_tasks, lima_max_error_tasks, uint, 0644);
+
 static int lima_ioctl_get_param(struct drm_device *dev, void *data, struct drm_file *file)
 {
 	struct drm_lima_get_param *args = data;
@@ -272,6 +278,93 @@ static struct drm_driver lima_drm_driver = {
 	.gem_prime_mmap = drm_gem_prime_mmap,
 };
 
+struct lima_block_reader {
+	void *dst;
+	size_t base;
+	size_t count;
+	size_t off;
+	ssize_t read;
+};
+
+static bool lima_read_block(struct lima_block_reader *reader,
+			    void *src, size_t src_size)
+{
+	size_t max_off = reader->base + src_size;
+
+	if (reader->off < max_off) {
+		size_t size = min_t(size_t, max_off - reader->off,
+				    reader->count);
+
+		memcpy(reader->dst, src + (reader->off - reader->base), size);
+
+		reader->dst += size;
+		reader->off += size;
+		reader->read += size;
+		reader->count -= size;
+	}
+
+	reader->base = max_off;
+
+	return !!reader->count;
+}
+
+static ssize_t lima_error_state_read(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *attr, char *buf,
+				     loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct lima_device *ldev = dev_get_drvdata(dev);
+	struct lima_sched_error_task *et;
+	struct lima_block_reader reader = {
+		.dst = buf,
+		.count = count,
+		.off = off,
+	};
+
+	mutex_lock(&ldev->error_task_list_lock);
+
+	if (lima_read_block(&reader, &ldev->dump, sizeof(ldev->dump))) {
+		list_for_each_entry(et, &ldev->error_task_list, list) {
+			if (!lima_read_block(&reader, et->data, et->size))
+				break;
+		}
+	}
+
+	mutex_unlock(&ldev->error_task_list_lock);
+	return reader.read;
+}
+
+static ssize_t lima_error_state_write(struct file *file, struct kobject *kobj,
+				      struct bin_attribute *attr, char *buf,
+				      loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct lima_device *ldev = dev_get_drvdata(dev);
+	struct lima_sched_error_task *et, *tmp;
+
+	mutex_lock(&ldev->error_task_list_lock);
+
+	list_for_each_entry_safe(et, tmp, &ldev->error_task_list, list) {
+		list_del(&et->list);
+		kvfree(et);
+	}
+
+	ldev->dump.size = 0;
+	ldev->dump.num_tasks = 0;
+
+	mutex_unlock(&ldev->error_task_list_lock);
+
+	return count;
+}
+
+static const struct bin_attribute lima_error_state_attr = {
+	.attr.name = "error",
+	.attr.mode = 0600,
+	.size = 0,
+	.read = lima_error_state_read,
+	.write = lima_error_state_write,
+};
+
 static int lima_pdev_probe(struct platform_device *pdev)
 {
 	struct lima_device *ldev;
@@ -288,7 +381,6 @@ static int lima_pdev_probe(struct platform_device *pdev)
 		goto err_out0;
 	}
 
-	ldev->pdev = pdev;
 	ldev->dev = &pdev->dev;
 	ldev->id = (enum lima_gpu_id)of_device_get_match_data(&pdev->dev);
 
@@ -306,16 +398,34 @@ static int lima_pdev_probe(struct platform_device *pdev)
 	if (err)
 		goto err_out1;
 
+	err = lima_devfreq_init(ldev);
+	if (err) {
+		dev_err(&pdev->dev, "Fatal error during devfreq init\n");
+		goto err_out2;
+	}
+
+	pm_runtime_set_active(ldev->dev);
+	pm_runtime_mark_last_busy(ldev->dev);
+	pm_runtime_set_autosuspend_delay(ldev->dev, 200);
+	pm_runtime_use_autosuspend(ldev->dev);
+	pm_runtime_enable(ldev->dev);
+
 	/*
 	 * Register the DRM device with the core and the connectors with
 	 * sysfs.
 	 */
 	err = drm_dev_register(ddev, 0);
 	if (err < 0)
-		goto err_out2;
+		goto err_out3;
+
+	if (sysfs_create_bin_file(&ldev->dev->kobj, &lima_error_state_attr))
+		dev_warn(ldev->dev, "fail to create error state sysfs\n");
 
 	return 0;
 
+err_out3:
+	pm_runtime_disable(ldev->dev);
+	lima_devfreq_fini(ldev);
 err_out2:
 	lima_device_fini(ldev);
 err_out1:
@@ -330,8 +440,17 @@ static int lima_pdev_remove(struct platform_device *pdev)
 	struct lima_device *ldev = platform_get_drvdata(pdev);
 	struct drm_device *ddev = ldev->ddev;
 
+	sysfs_remove_bin_file(&ldev->dev->kobj, &lima_error_state_attr);
+
 	drm_dev_unregister(ddev);
+
+	/* stop autosuspend to make sure device is in active state */
+	pm_runtime_set_autosuspend_delay(ldev->dev, -1);
+	pm_runtime_disable(ldev->dev);
+
+	lima_devfreq_fini(ldev);
 	lima_device_fini(ldev);
+
 	drm_dev_put(ddev);
 	lima_sched_slab_fini();
 	return 0;
@@ -344,26 +463,22 @@ static const struct of_device_id dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dt_match);
 
+static const struct dev_pm_ops lima_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(lima_device_suspend, lima_device_resume, NULL)
+};
+
 static struct platform_driver lima_platform_driver = {
 	.probe      = lima_pdev_probe,
 	.remove     = lima_pdev_remove,
 	.driver     = {
 		.name   = "lima",
+		.pm	= &lima_pm_ops,
 		.of_match_table = dt_match,
 	},
 };
 
-static int __init lima_init(void)
-{
-	return platform_driver_register(&lima_platform_driver);
-}
-module_init(lima_init);
-
-static void __exit lima_exit(void)
-{
-	platform_driver_unregister(&lima_platform_driver);
-}
-module_exit(lima_exit);
+module_platform_driver(lima_platform_driver);
 
 MODULE_AUTHOR("Lima Project Developers");
 MODULE_DESCRIPTION("Lima DRM Driver");
diff --git a/drivers/gpu/drm/lima/lima_drv.h b/drivers/gpu/drm/lima/lima_drv.h
index f492ecc6a5d9..fdbd4077c768 100644
--- a/drivers/gpu/drm/lima/lima_drv.h
+++ b/drivers/gpu/drm/lima/lima_drv.h
@@ -10,6 +10,7 @@
 
 extern int lima_sched_timeout_ms;
 extern uint lima_heap_init_nr_pages;
+extern uint lima_max_error_tasks;
 
 struct lima_vm;
 struct lima_bo;
diff --git a/drivers/gpu/drm/lima/lima_dump.h b/drivers/gpu/drm/lima/lima_dump.h
new file mode 100644
index 000000000000..ca243d99c51b
--- /dev/null
+++ b/drivers/gpu/drm/lima/lima_dump.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/* Copyright 2020 Qiang Yu <yuq825@gmail.com> */
+
+#ifndef __LIMA_DUMP_H__
+#define __LIMA_DUMP_H__
+
+#include <linux/types.h>
+
+/**
+ * dump file format for all the information to start a lima task
+ *
+ * top level format
+ * | magic code "LIMA" | format version | num tasks | data size |
+ * | reserved | reserved | reserved | reserved |
+ * | task 1 ID | task 1 size | num chunks | reserved | task 1 data |
+ * | task 2 ID | task 2 size | num chunks | reserved | task 2 data |
+ * ...
+ *
+ * task data format
+ * | chunk 1 ID | chunk 1 size | reserved | reserved | chunk 1 data |
+ * | chunk 2 ID | chunk 2 size | reserved | reserved | chunk 2 data |
+ * ...
+ *
+ */
+
+#define LIMA_DUMP_MAJOR 1
+#define LIMA_DUMP_MINOR 0
+
+#define LIMA_DUMP_MAGIC 0x414d494c
+
+struct lima_dump_head {
+	__u32 magic;
+	__u16 version_major;
+	__u16 version_minor;
+	__u32 num_tasks;
+	__u32 size;
+	__u32 reserved[4];
+};
+
+#define LIMA_DUMP_TASK_GP   0
+#define LIMA_DUMP_TASK_PP   1
+#define LIMA_DUMP_TASK_NUM  2
+
+struct lima_dump_task {
+	__u32 id;
+	__u32 size;
+	__u32 num_chunks;
+	__u32 reserved;
+};
+
+#define LIMA_DUMP_CHUNK_FRAME         0
+#define LIMA_DUMP_CHUNK_BUFFER        1
+#define LIMA_DUMP_CHUNK_PROCESS_NAME  2
+#define LIMA_DUMP_CHUNK_PROCESS_ID    3
+#define LIMA_DUMP_CHUNK_NUM           4
+
+struct lima_dump_chunk {
+	__u32 id;
+	__u32 size;
+	__u32 reserved[2];
+};
+
+struct lima_dump_chunk_buffer {
+	__u32 id;
+	__u32 size;
+	__u32 va;
+	__u32 reserved;
+};
+
+struct lima_dump_chunk_pid {
+	__u32 id;
+	__u32 size;
+	__u32 pid;
+	__u32 reserved;
+};
+
+#endif
diff --git a/drivers/gpu/drm/lima/lima_gp.c b/drivers/gpu/drm/lima/lima_gp.c
index d8841c870d90..8dd501b7a3d0 100644
--- a/drivers/gpu/drm/lima/lima_gp.c
+++ b/drivers/gpu/drm/lima/lima_gp.c
@@ -274,6 +274,23 @@ static void lima_gp_print_version(struct lima_ip *ip)
 static struct kmem_cache *lima_gp_task_slab;
 static int lima_gp_task_slab_refcnt;
 
+static int lima_gp_hw_init(struct lima_ip *ip)
+{
+	ip->data.async_reset = false;
+	lima_gp_soft_reset_async(ip);
+	return lima_gp_soft_reset_async_wait(ip);
+}
+
+int lima_gp_resume(struct lima_ip *ip)
+{
+	return lima_gp_hw_init(ip);
+}
+
+void lima_gp_suspend(struct lima_ip *ip)
+{
+
+}
+
 int lima_gp_init(struct lima_ip *ip)
 {
 	struct lima_device *dev = ip->dev;
@@ -281,9 +298,7 @@ int lima_gp_init(struct lima_ip *ip)
 
 	lima_gp_print_version(ip);
 
-	ip->data.async_reset = false;
-	lima_gp_soft_reset_async(ip);
-	err = lima_gp_soft_reset_async_wait(ip);
+	err = lima_gp_hw_init(ip);
 	if (err)
 		return err;
 
diff --git a/drivers/gpu/drm/lima/lima_gp.h b/drivers/gpu/drm/lima/lima_gp.h
index 516e5c1babbb..02ec9af78a51 100644
--- a/drivers/gpu/drm/lima/lima_gp.h
+++ b/drivers/gpu/drm/lima/lima_gp.h
@@ -7,6 +7,8 @@
 struct lima_ip;
 struct lima_device;
 
+int lima_gp_resume(struct lima_ip *ip);
+void lima_gp_suspend(struct lima_ip *ip);
 int lima_gp_init(struct lima_ip *ip);
 void lima_gp_fini(struct lima_ip *ip);
 
diff --git a/drivers/gpu/drm/lima/lima_l2_cache.c b/drivers/gpu/drm/lima/lima_l2_cache.c
index 6873a7af5a5c..c4080a02957b 100644
--- a/drivers/gpu/drm/lima/lima_l2_cache.c
+++ b/drivers/gpu/drm/lima/lima_l2_cache.c
@@ -38,9 +38,35 @@ int lima_l2_cache_flush(struct lima_ip *ip)
 	return ret;
 }
 
+static int lima_l2_cache_hw_init(struct lima_ip *ip)
+{
+	int err;
+
+	err = lima_l2_cache_flush(ip);
+	if (err)
+		return err;
+
+	l2_cache_write(LIMA_L2_CACHE_ENABLE,
+		       LIMA_L2_CACHE_ENABLE_ACCESS |
+		       LIMA_L2_CACHE_ENABLE_READ_ALLOCATE);
+	l2_cache_write(LIMA_L2_CACHE_MAX_READS, 0x1c);
+
+	return 0;
+}
+
+int lima_l2_cache_resume(struct lima_ip *ip)
+{
+	return lima_l2_cache_hw_init(ip);
+}
+
+void lima_l2_cache_suspend(struct lima_ip *ip)
+{
+
+}
+
 int lima_l2_cache_init(struct lima_ip *ip)
 {
-	int i, err;
+	int i;
 	u32 size;
 	struct lima_device *dev = ip->dev;
 
@@ -63,15 +89,7 @@ int lima_l2_cache_init(struct lima_ip *ip)
 		 1 << (size & 0xff),
 		 1 << ((size >> 24) & 0xff));
 
-	err = lima_l2_cache_flush(ip);
-	if (err)
-		return err;
-
-	l2_cache_write(LIMA_L2_CACHE_ENABLE,
-		       LIMA_L2_CACHE_ENABLE_ACCESS|LIMA_L2_CACHE_ENABLE_READ_ALLOCATE);
-	l2_cache_write(LIMA_L2_CACHE_MAX_READS, 0x1c);
-
-	return 0;
+	return lima_l2_cache_hw_init(ip);
 }
 
 void lima_l2_cache_fini(struct lima_ip *ip)
diff --git a/drivers/gpu/drm/lima/lima_l2_cache.h b/drivers/gpu/drm/lima/lima_l2_cache.h
index c63fb676ff14..1aeeefd53fb9 100644
--- a/drivers/gpu/drm/lima/lima_l2_cache.h
+++ b/drivers/gpu/drm/lima/lima_l2_cache.h
@@ -6,6 +6,8 @@
 
 struct lima_ip;
 
+int lima_l2_cache_resume(struct lima_ip *ip);
+void lima_l2_cache_suspend(struct lima_ip *ip);
 int lima_l2_cache_init(struct lima_ip *ip);
 void lima_l2_cache_fini(struct lima_ip *ip);
 
diff --git a/drivers/gpu/drm/lima/lima_mmu.c b/drivers/gpu/drm/lima/lima_mmu.c
index f79d2af427e7..a1ae6c252dc2 100644
--- a/drivers/gpu/drm/lima/lima_mmu.c
+++ b/drivers/gpu/drm/lima/lima_mmu.c
@@ -59,12 +59,44 @@ static irqreturn_t lima_mmu_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-int lima_mmu_init(struct lima_ip *ip)
+static int lima_mmu_hw_init(struct lima_ip *ip)
 {
 	struct lima_device *dev = ip->dev;
 	int err;
 	u32 v;
 
+	mmu_write(LIMA_MMU_COMMAND, LIMA_MMU_COMMAND_HARD_RESET);
+	err = lima_mmu_send_command(LIMA_MMU_COMMAND_HARD_RESET,
+				    LIMA_MMU_DTE_ADDR, v, v == 0);
+	if (err)
+		return err;
+
+	mmu_write(LIMA_MMU_INT_MASK,
+		  LIMA_MMU_INT_PAGE_FAULT | LIMA_MMU_INT_READ_BUS_ERROR);
+	mmu_write(LIMA_MMU_DTE_ADDR, dev->empty_vm->pd.dma);
+	return lima_mmu_send_command(LIMA_MMU_COMMAND_ENABLE_PAGING,
+				     LIMA_MMU_STATUS, v,
+				     v & LIMA_MMU_STATUS_PAGING_ENABLED);
+}
+
+int lima_mmu_resume(struct lima_ip *ip)
+{
+	if (ip->id == lima_ip_ppmmu_bcast)
+		return 0;
+
+	return lima_mmu_hw_init(ip);
+}
+
+void lima_mmu_suspend(struct lima_ip *ip)
+{
+
+}
+
+int lima_mmu_init(struct lima_ip *ip)
+{
+	struct lima_device *dev = ip->dev;
+	int err;
+
 	if (ip->id == lima_ip_ppmmu_bcast)
 		return 0;
 
@@ -74,12 +106,6 @@ int lima_mmu_init(struct lima_ip *ip)
 		return -EIO;
 	}
 
-	mmu_write(LIMA_MMU_COMMAND, LIMA_MMU_COMMAND_HARD_RESET);
-	err = lima_mmu_send_command(LIMA_MMU_COMMAND_HARD_RESET,
-				    LIMA_MMU_DTE_ADDR, v, v == 0);
-	if (err)
-		return err;
-
 	err = devm_request_irq(dev->dev, ip->irq, lima_mmu_irq_handler,
 			       IRQF_SHARED, lima_ip_name(ip), ip);
 	if (err) {
@@ -87,11 +113,7 @@ int lima_mmu_init(struct lima_ip *ip)
 		return err;
 	}
 
-	mmu_write(LIMA_MMU_INT_MASK, LIMA_MMU_INT_PAGE_FAULT | LIMA_MMU_INT_READ_BUS_ERROR);
-	mmu_write(LIMA_MMU_DTE_ADDR, dev->empty_vm->pd.dma);
-	return lima_mmu_send_command(LIMA_MMU_COMMAND_ENABLE_PAGING,
-				     LIMA_MMU_STATUS, v,
-				     v & LIMA_MMU_STATUS_PAGING_ENABLED);
+	return lima_mmu_hw_init(ip);
 }
 
 void lima_mmu_fini(struct lima_ip *ip)
@@ -113,8 +135,7 @@ void lima_mmu_switch_vm(struct lima_ip *ip, struct lima_vm *vm)
 			      LIMA_MMU_STATUS, v,
 			      v & LIMA_MMU_STATUS_STALL_ACTIVE);
 
-	if (vm)
-		mmu_write(LIMA_MMU_DTE_ADDR, vm->pd.dma);
+	mmu_write(LIMA_MMU_DTE_ADDR, vm->pd.dma);
 
 	/* flush the TLB */
 	mmu_write(LIMA_MMU_COMMAND, LIMA_MMU_COMMAND_ZAP_CACHE);
diff --git a/drivers/gpu/drm/lima/lima_mmu.h b/drivers/gpu/drm/lima/lima_mmu.h
index 4f8ccbebcba1..f0c97ac75ea0 100644
--- a/drivers/gpu/drm/lima/lima_mmu.h
+++ b/drivers/gpu/drm/lima/lima_mmu.h
@@ -7,6 +7,8 @@
 struct lima_ip;
 struct lima_vm;
 
+int lima_mmu_resume(struct lima_ip *ip);
+void lima_mmu_suspend(struct lima_ip *ip);
 int lima_mmu_init(struct lima_ip *ip);
 void lima_mmu_fini(struct lima_ip *ip);
 
diff --git a/drivers/gpu/drm/lima/lima_pmu.c b/drivers/gpu/drm/lima/lima_pmu.c
index 571f6d661581..e397e1146e96 100644
--- a/drivers/gpu/drm/lima/lima_pmu.c
+++ b/drivers/gpu/drm/lima/lima_pmu.c
@@ -21,7 +21,7 @@ static int lima_pmu_wait_cmd(struct lima_ip *ip)
 				 v, v & LIMA_PMU_INT_CMD_MASK,
 				 100, 100000);
 	if (err) {
-		dev_err(dev->dev, "timeout wait pmd cmd\n");
+		dev_err(dev->dev, "timeout wait pmu cmd\n");
 		return err;
 	}
 
@@ -29,7 +29,41 @@ static int lima_pmu_wait_cmd(struct lima_ip *ip)
 	return 0;
 }
 
-int lima_pmu_init(struct lima_ip *ip)
+static u32 lima_pmu_get_ip_mask(struct lima_ip *ip)
+{
+	struct lima_device *dev = ip->dev;
+	u32 ret = 0;
+	int i;
+
+	ret |= LIMA_PMU_POWER_GP0_MASK;
+
+	if (dev->id == lima_gpu_mali400) {
+		ret |= LIMA_PMU_POWER_L2_MASK;
+		for (i = 0; i < 4; i++) {
+			if (dev->ip[lima_ip_pp0 + i].present)
+				ret |= LIMA_PMU_POWER_PP_MASK(i);
+		}
+	} else {
+		if (dev->ip[lima_ip_pp0].present)
+			ret |= LIMA450_PMU_POWER_PP0_MASK;
+		for (i = lima_ip_pp1; i <= lima_ip_pp3; i++) {
+			if (dev->ip[i].present) {
+				ret |= LIMA450_PMU_POWER_PP13_MASK;
+				break;
+			}
+		}
+		for (i = lima_ip_pp4; i <= lima_ip_pp7; i++) {
+			if (dev->ip[i].present) {
+				ret |= LIMA450_PMU_POWER_PP47_MASK;
+				break;
+			}
+		}
+	}
+
+	return ret;
+}
+
+static int lima_pmu_hw_init(struct lima_ip *ip)
 {
 	int err;
 	u32 stat;
@@ -54,7 +88,44 @@ int lima_pmu_init(struct lima_ip *ip)
 	return 0;
 }
 
-void lima_pmu_fini(struct lima_ip *ip)
+static void lima_pmu_hw_fini(struct lima_ip *ip)
 {
+	u32 stat;
+
+	if (!ip->data.mask)
+		ip->data.mask = lima_pmu_get_ip_mask(ip);
 
+	stat = ~pmu_read(LIMA_PMU_STATUS) & ip->data.mask;
+	if (stat) {
+		pmu_write(LIMA_PMU_POWER_DOWN, stat);
+
+		/* Don't wait for interrupt on Mali400 if all domains are
+		 * powered off because the HW won't generate an interrupt
+		 * in this case.
+		 */
+		if (ip->dev->id == lima_gpu_mali400)
+			pmu_write(LIMA_PMU_INT_CLEAR, LIMA_PMU_INT_CMD_MASK);
+		else
+			lima_pmu_wait_cmd(ip);
+	}
+}
+
+int lima_pmu_resume(struct lima_ip *ip)
+{
+	return lima_pmu_hw_init(ip);
+}
+
+void lima_pmu_suspend(struct lima_ip *ip)
+{
+	lima_pmu_hw_fini(ip);
+}
+
+int lima_pmu_init(struct lima_ip *ip)
+{
+	return lima_pmu_hw_init(ip);
+}
+
+void lima_pmu_fini(struct lima_ip *ip)
+{
+	lima_pmu_hw_fini(ip);
 }
diff --git a/drivers/gpu/drm/lima/lima_pmu.h b/drivers/gpu/drm/lima/lima_pmu.h
index a2a18775eb07..652dc7af3047 100644
--- a/drivers/gpu/drm/lima/lima_pmu.h
+++ b/drivers/gpu/drm/lima/lima_pmu.h
@@ -6,6 +6,8 @@
 
 struct lima_ip;
 
+int lima_pmu_resume(struct lima_ip *ip);
+void lima_pmu_suspend(struct lima_ip *ip);
 int lima_pmu_init(struct lima_ip *ip);
 void lima_pmu_fini(struct lima_ip *ip);
 
diff --git a/drivers/gpu/drm/lima/lima_pp.c b/drivers/gpu/drm/lima/lima_pp.c
index 8fef224b93c8..33f01383409c 100644
--- a/drivers/gpu/drm/lima/lima_pp.c
+++ b/drivers/gpu/drm/lima/lima_pp.c
@@ -223,6 +223,23 @@ static void lima_pp_print_version(struct lima_ip *ip)
 		 lima_ip_name(ip), name, major, minor);
 }
 
+static int lima_pp_hw_init(struct lima_ip *ip)
+{
+	ip->data.async_reset = false;
+	lima_pp_soft_reset_async(ip);
+	return lima_pp_soft_reset_async_wait(ip);
+}
+
+int lima_pp_resume(struct lima_ip *ip)
+{
+	return lima_pp_hw_init(ip);
+}
+
+void lima_pp_suspend(struct lima_ip *ip)
+{
+
+}
+
 int lima_pp_init(struct lima_ip *ip)
 {
 	struct lima_device *dev = ip->dev;
@@ -230,9 +247,7 @@ int lima_pp_init(struct lima_ip *ip)
 
 	lima_pp_print_version(ip);
 
-	ip->data.async_reset = false;
-	lima_pp_soft_reset_async(ip);
-	err = lima_pp_soft_reset_async_wait(ip);
+	err = lima_pp_hw_init(ip);
 	if (err)
 		return err;
 
@@ -254,6 +269,16 @@ void lima_pp_fini(struct lima_ip *ip)
 
 }
 
+int lima_pp_bcast_resume(struct lima_ip *ip)
+{
+	return 0;
+}
+
+void lima_pp_bcast_suspend(struct lima_ip *ip)
+{
+
+}
+
 int lima_pp_bcast_init(struct lima_ip *ip)
 {
 	struct lima_device *dev = ip->dev;
diff --git a/drivers/gpu/drm/lima/lima_pp.h b/drivers/gpu/drm/lima/lima_pp.h
index bf60c77b2633..16ec96de15a9 100644
--- a/drivers/gpu/drm/lima/lima_pp.h
+++ b/drivers/gpu/drm/lima/lima_pp.h
@@ -7,9 +7,13 @@
 struct lima_ip;
 struct lima_device;
 
+int lima_pp_resume(struct lima_ip *ip);
+void lima_pp_suspend(struct lima_ip *ip);
 int lima_pp_init(struct lima_ip *ip);
 void lima_pp_fini(struct lima_ip *ip);
 
+int lima_pp_bcast_resume(struct lima_ip *ip);
+void lima_pp_bcast_suspend(struct lima_ip *ip);
 int lima_pp_bcast_init(struct lima_ip *ip);
 void lima_pp_bcast_fini(struct lima_ip *ip);
 
diff --git a/drivers/gpu/drm/lima/lima_sched.c b/drivers/gpu/drm/lima/lima_sched.c
index 3886999b4533..e6cefda00279 100644
--- a/drivers/gpu/drm/lima/lima_sched.c
+++ b/drivers/gpu/drm/lima/lima_sched.c
@@ -3,14 +3,17 @@
 
 #include <linux/kthread.h>
 #include <linux/slab.h>
-#include <linux/xarray.h>
+#include <linux/vmalloc.h>
+#include <linux/pm_runtime.h>
 
+#include "lima_devfreq.h"
 #include "lima_drv.h"
 #include "lima_sched.h"
 #include "lima_vm.h"
 #include "lima_mmu.h"
 #include "lima_l2_cache.h"
 #include "lima_gem.h"
+#include "lima_trace.h"
 
 struct lima_fence {
 	struct dma_fence base;
@@ -176,6 +179,7 @@ struct dma_fence *lima_sched_context_queue_task(struct lima_sched_context *conte
 {
 	struct dma_fence *fence = dma_fence_get(&task->base.s_fence->finished);
 
+	trace_lima_task_submit(task);
 	drm_sched_entity_push_job(&task->base, &context->base);
 	return fence;
 }
@@ -191,14 +195,36 @@ static struct dma_fence *lima_sched_dependency(struct drm_sched_job *job,
 	return NULL;
 }
 
+static int lima_pm_busy(struct lima_device *ldev)
+{
+	int ret;
+
+	/* resume GPU if it has been suspended by runtime PM */
+	ret = pm_runtime_get_sync(ldev->dev);
+	if (ret < 0)
+		return ret;
+
+	lima_devfreq_record_busy(&ldev->devfreq);
+	return 0;
+}
+
+static void lima_pm_idle(struct lima_device *ldev)
+{
+	lima_devfreq_record_idle(&ldev->devfreq);
+
+	/* GPU can do auto runtime suspend */
+	pm_runtime_mark_last_busy(ldev->dev);
+	pm_runtime_put_autosuspend(ldev->dev);
+}
+
 static struct dma_fence *lima_sched_run_job(struct drm_sched_job *job)
 {
 	struct lima_sched_task *task = to_lima_task(job);
 	struct lima_sched_pipe *pipe = to_lima_pipe(job->sched);
+	struct lima_device *ldev = pipe->ldev;
 	struct lima_fence *fence;
 	struct dma_fence *ret;
-	struct lima_vm *vm = NULL, *last_vm = NULL;
-	int i;
+	int i, err;
 
 	/* after GPU reset */
 	if (job->s_fence->finished.error < 0)
@@ -207,6 +233,13 @@ static struct dma_fence *lima_sched_run_job(struct drm_sched_job *job)
 	fence = lima_fence_create(pipe);
 	if (!fence)
 		return NULL;
+
+	err = lima_pm_busy(ldev);
+	if (err < 0) {
+		dma_fence_put(&fence->base);
+		return NULL;
+	}
+
 	task->fence = &fence->base;
 
 	/* for caller usage of the fence, otherwise irq handler
@@ -234,21 +267,17 @@ static struct dma_fence *lima_sched_run_job(struct drm_sched_job *job)
 	for (i = 0; i < pipe->num_l2_cache; i++)
 		lima_l2_cache_flush(pipe->l2_cache[i]);
 
-	if (task->vm != pipe->current_vm) {
-		vm = lima_vm_get(task->vm);
-		last_vm = pipe->current_vm;
-		pipe->current_vm = task->vm;
-	}
+	lima_vm_put(pipe->current_vm);
+	pipe->current_vm = lima_vm_get(task->vm);
 
 	if (pipe->bcast_mmu)
-		lima_mmu_switch_vm(pipe->bcast_mmu, vm);
+		lima_mmu_switch_vm(pipe->bcast_mmu, pipe->current_vm);
 	else {
 		for (i = 0; i < pipe->num_mmu; i++)
-			lima_mmu_switch_vm(pipe->mmu[i], vm);
+			lima_mmu_switch_vm(pipe->mmu[i], pipe->current_vm);
 	}
 
-	if (last_vm)
-		lima_vm_put(last_vm);
+	trace_lima_task_run(task);
 
 	pipe->error = false;
 	pipe->task_run(pipe, task);
@@ -256,10 +285,139 @@ static struct dma_fence *lima_sched_run_job(struct drm_sched_job *job)
 	return task->fence;
 }
 
+static void lima_sched_build_error_task_list(struct lima_sched_task *task)
+{
+	struct lima_sched_error_task *et;
+	struct lima_sched_pipe *pipe = to_lima_pipe(task->base.sched);
+	struct lima_ip *ip = pipe->processor[0];
+	int pipe_id = ip->id == lima_ip_gp ? lima_pipe_gp : lima_pipe_pp;
+	struct lima_device *dev = ip->dev;
+	struct lima_sched_context *sched_ctx =
+		container_of(task->base.entity,
+			     struct lima_sched_context, base);
+	struct lima_ctx *ctx =
+		container_of(sched_ctx, struct lima_ctx, context[pipe_id]);
+	struct lima_dump_task *dt;
+	struct lima_dump_chunk *chunk;
+	struct lima_dump_chunk_pid *pid_chunk;
+	struct lima_dump_chunk_buffer *buffer_chunk;
+	u32 size, task_size, mem_size;
+	int i;
+
+	mutex_lock(&dev->error_task_list_lock);
+
+	if (dev->dump.num_tasks >= lima_max_error_tasks) {
+		dev_info(dev->dev, "fail to save task state from %s pid %d: "
+			 "error task list is full\n", ctx->pname, ctx->pid);
+		goto out;
+	}
+
+	/* frame chunk */
+	size = sizeof(struct lima_dump_chunk) + pipe->frame_size;
+	/* process name chunk */
+	size += sizeof(struct lima_dump_chunk) + sizeof(ctx->pname);
+	/* pid chunk */
+	size += sizeof(struct lima_dump_chunk);
+	/* buffer chunks */
+	for (i = 0; i < task->num_bos; i++) {
+		struct lima_bo *bo = task->bos[i];
+
+		size += sizeof(struct lima_dump_chunk);
+		size += bo->heap_size ? bo->heap_size : lima_bo_size(bo);
+	}
+
+	task_size = size + sizeof(struct lima_dump_task);
+	mem_size = task_size + sizeof(*et);
+	et = kvmalloc(mem_size, GFP_KERNEL);
+	if (!et) {
+		dev_err(dev->dev, "fail to alloc task dump buffer of size %x\n",
+			mem_size);
+		goto out;
+	}
+
+	et->data = et + 1;
+	et->size = task_size;
+
+	dt = et->data;
+	memset(dt, 0, sizeof(*dt));
+	dt->id = pipe_id;
+	dt->size = size;
+
+	chunk = (struct lima_dump_chunk *)(dt + 1);
+	memset(chunk, 0, sizeof(*chunk));
+	chunk->id = LIMA_DUMP_CHUNK_FRAME;
+	chunk->size = pipe->frame_size;
+	memcpy(chunk + 1, task->frame, pipe->frame_size);
+	dt->num_chunks++;
+
+	chunk = (void *)(chunk + 1) + chunk->size;
+	memset(chunk, 0, sizeof(*chunk));
+	chunk->id = LIMA_DUMP_CHUNK_PROCESS_NAME;
+	chunk->size = sizeof(ctx->pname);
+	memcpy(chunk + 1, ctx->pname, sizeof(ctx->pname));
+	dt->num_chunks++;
+
+	pid_chunk = (void *)(chunk + 1) + chunk->size;
+	memset(pid_chunk, 0, sizeof(*pid_chunk));
+	pid_chunk->id = LIMA_DUMP_CHUNK_PROCESS_ID;
+	pid_chunk->pid = ctx->pid;
+	dt->num_chunks++;
+
+	buffer_chunk = (void *)(pid_chunk + 1) + pid_chunk->size;
+	for (i = 0; i < task->num_bos; i++) {
+		struct lima_bo *bo = task->bos[i];
+		void *data;
+
+		memset(buffer_chunk, 0, sizeof(*buffer_chunk));
+		buffer_chunk->id = LIMA_DUMP_CHUNK_BUFFER;
+		buffer_chunk->va = lima_vm_get_va(task->vm, bo);
+
+		if (bo->heap_size) {
+			buffer_chunk->size = bo->heap_size;
+
+			data = vmap(bo->base.pages, bo->heap_size >> PAGE_SHIFT,
+				    VM_MAP, pgprot_writecombine(PAGE_KERNEL));
+			if (!data) {
+				kvfree(et);
+				goto out;
+			}
+
+			memcpy(buffer_chunk + 1, data, buffer_chunk->size);
+
+			vunmap(data);
+		} else {
+			buffer_chunk->size = lima_bo_size(bo);
+
+			data = drm_gem_shmem_vmap(&bo->base.base);
+			if (IS_ERR_OR_NULL(data)) {
+				kvfree(et);
+				goto out;
+			}
+
+			memcpy(buffer_chunk + 1, data, buffer_chunk->size);
+
+			drm_gem_shmem_vunmap(&bo->base.base, data);
+		}
+
+		buffer_chunk = (void *)(buffer_chunk + 1) + buffer_chunk->size;
+		dt->num_chunks++;
+	}
+
+	list_add(&et->list, &dev->error_task_list);
+	dev->dump.size += et->size;
+	dev->dump.num_tasks++;
+
+	dev_info(dev->dev, "save error task state success\n");
+
+out:
+	mutex_unlock(&dev->error_task_list_lock);
+}
+
 static void lima_sched_timedout_job(struct drm_sched_job *job)
 {
 	struct lima_sched_pipe *pipe = to_lima_pipe(job->sched);
 	struct lima_sched_task *task = to_lima_task(job);
+	struct lima_device *ldev = pipe->ldev;
 
 	if (!pipe->error)
 		DRM_ERROR("lima job timeout\n");
@@ -268,6 +426,8 @@ static void lima_sched_timedout_job(struct drm_sched_job *job)
 
 	drm_sched_increase_karma(&task->base);
 
+	lima_sched_build_error_task_list(task);
+
 	pipe->task_error(pipe);
 
 	if (pipe->bcast_mmu)
@@ -279,12 +439,12 @@ static void lima_sched_timedout_job(struct drm_sched_job *job)
 			lima_mmu_page_fault_resume(pipe->mmu[i]);
 	}
 
-	if (pipe->current_vm)
-		lima_vm_put(pipe->current_vm);
-
+	lima_vm_put(pipe->current_vm);
 	pipe->current_vm = NULL;
 	pipe->current_task = NULL;
 
+	lima_pm_idle(ldev);
+
 	drm_sched_resubmit_jobs(&pipe->base);
 	drm_sched_start(&pipe->base, true);
 }
@@ -355,6 +515,7 @@ void lima_sched_pipe_fini(struct lima_sched_pipe *pipe)
 void lima_sched_pipe_task_done(struct lima_sched_pipe *pipe)
 {
 	struct lima_sched_task *task = pipe->current_task;
+	struct lima_device *ldev = pipe->ldev;
 
 	if (pipe->error) {
 		if (task && task->recoverable)
@@ -364,5 +525,7 @@ void lima_sched_pipe_task_done(struct lima_sched_pipe *pipe)
 	} else {
 		pipe->task_fini(pipe);
 		dma_fence_signal(task->fence);
+
+		lima_pm_idle(ldev);
 	}
 }
diff --git a/drivers/gpu/drm/lima/lima_sched.h b/drivers/gpu/drm/lima/lima_sched.h
index d64393fb50a9..90f03c48ef4a 100644
--- a/drivers/gpu/drm/lima/lima_sched.h
+++ b/drivers/gpu/drm/lima/lima_sched.h
@@ -5,9 +5,18 @@
 #define __LIMA_SCHED_H__
 
 #include <drm/gpu_scheduler.h>
+#include <linux/list.h>
+#include <linux/xarray.h>
 
+struct lima_device;
 struct lima_vm;
 
+struct lima_sched_error_task {
+	struct list_head list;
+	void *data;
+	u32 size;
+};
+
 struct lima_sched_task {
 	struct drm_sched_job base;
 
@@ -44,6 +53,8 @@ struct lima_sched_pipe {
 	u32 fence_seqno;
 	spinlock_t fence_lock;
 
+	struct lima_device *ldev;
+
 	struct lima_sched_task *current_task;
 	struct lima_vm *current_vm;
 
diff --git a/drivers/gpu/drm/lima/lima_trace.c b/drivers/gpu/drm/lima/lima_trace.c
new file mode 100644
index 000000000000..ea1c7289bebc
--- /dev/null
+++ b/drivers/gpu/drm/lima/lima_trace.c
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/* Copyright 2020 Qiang Yu <yuq825@gmail.com> */
+
+#include "lima_sched.h"
+
+#define CREATE_TRACE_POINTS
+#include "lima_trace.h"
diff --git a/drivers/gpu/drm/lima/lima_trace.h b/drivers/gpu/drm/lima/lima_trace.h
new file mode 100644
index 000000000000..3a430e93d384
--- /dev/null
+++ b/drivers/gpu/drm/lima/lima_trace.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/* Copyright 2020 Qiang Yu <yuq825@gmail.com> */
+
+#if !defined(_LIMA_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _LIMA_TRACE_H_
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM lima
+#define TRACE_INCLUDE_FILE lima_trace
+
+DECLARE_EVENT_CLASS(lima_task,
+	TP_PROTO(struct lima_sched_task *task),
+	TP_ARGS(task),
+	TP_STRUCT__entry(
+		__field(uint64_t, task_id)
+		__field(unsigned int, context)
+		__field(unsigned int, seqno)
+		__string(pipe, task->base.sched->name)
+		),
+
+	TP_fast_assign(
+		__entry->task_id = task->base.id;
+		__entry->context = task->base.s_fence->finished.context;
+		__entry->seqno = task->base.s_fence->finished.seqno;
+		__assign_str(pipe, task->base.sched->name)
+		),
+
+	TP_printk("task=%llu, context=%u seqno=%u pipe=%s",
+		  __entry->task_id, __entry->context, __entry->seqno,
+		  __get_str(pipe))
+);
+
+DEFINE_EVENT(lima_task, lima_task_submit,
+	     TP_PROTO(struct lima_sched_task *task),
+	     TP_ARGS(task)
+);
+
+DEFINE_EVENT(lima_task, lima_task_run,
+	     TP_PROTO(struct lima_sched_task *task),
+	     TP_ARGS(task)
+);
+
+#endif
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH ../../drivers/gpu/drm/lima
+#include <trace/define_trace.h>
diff --git a/drivers/gpu/drm/lima/lima_vm.h b/drivers/gpu/drm/lima/lima_vm.h
index 22aeec77d84d..3a7c74822d8b 100644
--- a/drivers/gpu/drm/lima/lima_vm.h
+++ b/drivers/gpu/drm/lima/lima_vm.h
@@ -54,7 +54,8 @@ static inline struct lima_vm *lima_vm_get(struct lima_vm *vm)
 
 static inline void lima_vm_put(struct lima_vm *vm)
 {
-	kref_put(&vm->refcount, lima_vm_release);
+	if (vm)
+		kref_put(&vm->refcount, lima_vm_release);
 }
 
 void lima_vm_print(struct lima_vm *vm);
diff --git a/drivers/gpu/drm/mcde/mcde_display.c b/drivers/gpu/drm/mcde/mcde_display.c
index e59907e68854..04e1d38d41f7 100644
--- a/drivers/gpu/drm/mcde/mcde_display.c
+++ b/drivers/gpu/drm/mcde/mcde_display.c
@@ -948,7 +948,7 @@ static void mcde_display_disable(struct drm_simple_display_pipe *pipe)
 {
 	struct drm_crtc *crtc = &pipe->crtc;
 	struct drm_device *drm = crtc->dev;
-	struct mcde *mcde = drm->dev_private;
+	struct mcde *mcde = to_mcde(drm);
 	struct drm_pending_vblank_event *event;
 
 	drm_crtc_vblank_off(crtc);
@@ -1020,7 +1020,7 @@ static void mcde_display_update(struct drm_simple_display_pipe *pipe,
 {
 	struct drm_crtc *crtc = &pipe->crtc;
 	struct drm_device *drm = crtc->dev;
-	struct mcde *mcde = drm->dev_private;
+	struct mcde *mcde = to_mcde(drm);
 	struct drm_pending_vblank_event *event = crtc->state->event;
 	struct drm_plane *plane = &pipe->plane;
 	struct drm_plane_state *pstate = plane->state;
@@ -1078,7 +1078,7 @@ static int mcde_display_enable_vblank(struct drm_simple_display_pipe *pipe)
 {
 	struct drm_crtc *crtc = &pipe->crtc;
 	struct drm_device *drm = crtc->dev;
-	struct mcde *mcde = drm->dev_private;
+	struct mcde *mcde = to_mcde(drm);
 	u32 val;
 
 	/* Enable all VBLANK IRQs */
@@ -1097,7 +1097,7 @@ static void mcde_display_disable_vblank(struct drm_simple_display_pipe *pipe)
 {
 	struct drm_crtc *crtc = &pipe->crtc;
 	struct drm_device *drm = crtc->dev;
-	struct mcde *mcde = drm->dev_private;
+	struct mcde *mcde = to_mcde(drm);
 
 	/* Disable all VBLANK IRQs */
 	writel(0, mcde->regs + MCDE_IMSCPP);
@@ -1117,7 +1117,7 @@ static struct drm_simple_display_pipe_funcs mcde_display_funcs = {
 
 int mcde_display_init(struct drm_device *drm)
 {
-	struct mcde *mcde = drm->dev_private;
+	struct mcde *mcde = to_mcde(drm);
 	int ret;
 	static const u32 formats[] = {
 		DRM_FORMAT_ARGB8888,
diff --git a/drivers/gpu/drm/mcde/mcde_drm.h b/drivers/gpu/drm/mcde/mcde_drm.h
index 80edd6628979..679c2c4e6d9d 100644
--- a/drivers/gpu/drm/mcde/mcde_drm.h
+++ b/drivers/gpu/drm/mcde/mcde_drm.h
@@ -34,6 +34,8 @@ struct mcde {
 	struct regulator *vana;
 };
 
+#define to_mcde(dev) container_of(dev, struct mcde, drm)
+
 bool mcde_dsi_irq(struct mipi_dsi_device *mdsi);
 void mcde_dsi_te_request(struct mipi_dsi_device *mdsi);
 extern struct platform_driver mcde_dsi_driver;
diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c
index f28cb7a576ba..84f3e2dbd77b 100644
--- a/drivers/gpu/drm/mcde/mcde_drv.c
+++ b/drivers/gpu/drm/mcde/mcde_drv.c
@@ -72,6 +72,7 @@
 #include <drm/drm_gem.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_of.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_panel.h>
@@ -163,7 +164,7 @@ static irqreturn_t mcde_irq(int irq, void *data)
 static int mcde_modeset_init(struct drm_device *drm)
 {
 	struct drm_mode_config *mode_config;
-	struct mcde *mcde = drm->dev_private;
+	struct mcde *mcde = to_mcde(drm);
 	int ret;
 
 	if (!mcde->bridge) {
@@ -183,13 +184,13 @@ static int mcde_modeset_init(struct drm_device *drm)
 	ret = drm_vblank_init(drm, 1);
 	if (ret) {
 		dev_err(drm->dev, "failed to init vblank\n");
-		goto out_config;
+		return ret;
 	}
 
 	ret = mcde_display_init(drm);
 	if (ret) {
 		dev_err(drm->dev, "failed to init display\n");
-		goto out_config;
+		return ret;
 	}
 
 	/*
@@ -203,7 +204,7 @@ static int mcde_modeset_init(struct drm_device *drm)
 						    mcde->bridge);
 	if (ret) {
 		dev_err(drm->dev, "failed to attach display output bridge\n");
-		goto out_config;
+		return ret;
 	}
 
 	drm_mode_config_reset(drm);
@@ -211,19 +212,6 @@ static int mcde_modeset_init(struct drm_device *drm)
 	drm_fbdev_generic_setup(drm, 32);
 
 	return 0;
-
-out_config:
-	drm_mode_config_cleanup(drm);
-	return ret;
-}
-
-static void mcde_release(struct drm_device *drm)
-{
-	struct mcde *mcde = drm->dev_private;
-
-	drm_mode_config_cleanup(drm);
-	drm_dev_fini(drm);
-	kfree(mcde);
 }
 
 DEFINE_DRM_GEM_CMA_FOPS(drm_fops);
@@ -231,7 +219,6 @@ DEFINE_DRM_GEM_CMA_FOPS(drm_fops);
 static struct drm_driver mcde_drm_driver = {
 	.driver_features =
 		DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
-	.release = mcde_release,
 	.lastclose = drm_fb_helper_lastclose,
 	.ioctls = NULL,
 	.fops = &drm_fops,
@@ -259,7 +246,9 @@ static int mcde_drm_bind(struct device *dev)
 	struct drm_device *drm = dev_get_drvdata(dev);
 	int ret;
 
-	drm_mode_config_init(drm);
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ret;
 
 	ret = component_bind_all(drm->dev, drm);
 	if (ret) {
@@ -318,35 +307,27 @@ static int mcde_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	mcde = kzalloc(sizeof(*mcde), GFP_KERNEL);
-	if (!mcde)
-		return -ENOMEM;
-	mcde->dev = dev;
-
-	ret = drm_dev_init(&mcde->drm, &mcde_drm_driver, dev);
-	if (ret) {
-		kfree(mcde);
-		return ret;
-	}
+	mcde = devm_drm_dev_alloc(dev, &mcde_drm_driver, struct mcde, drm);
+	if (IS_ERR(mcde))
+		return PTR_ERR(mcde);
 	drm = &mcde->drm;
-	drm->dev_private = mcde;
+	mcde->dev = dev;
 	platform_set_drvdata(pdev, drm);
 
 	/* Enable continuous updates: this is what Linux' framebuffer expects */
 	mcde->oneshot_mode = false;
-	drm->dev_private = mcde;
 
 	/* First obtain and turn on the main power */
 	mcde->epod = devm_regulator_get(dev, "epod");
 	if (IS_ERR(mcde->epod)) {
 		ret = PTR_ERR(mcde->epod);
 		dev_err(dev, "can't get EPOD regulator\n");
-		goto dev_unref;
+		return ret;
 	}
 	ret = regulator_enable(mcde->epod);
 	if (ret) {
 		dev_err(dev, "can't enable EPOD regulator\n");
-		goto dev_unref;
+		return ret;
 	}
 	mcde->vana = devm_regulator_get(dev, "vana");
 	if (IS_ERR(mcde->vana)) {
@@ -497,8 +478,6 @@ static int mcde_probe(struct platform_device *pdev)
 	regulator_disable(mcde->vana);
 regulator_epod_off:
 	regulator_disable(mcde->epod);
-dev_unref:
-	drm_dev_put(drm);
 	return ret;
 
 }
@@ -506,13 +485,12 @@ static int mcde_probe(struct platform_device *pdev)
 static int mcde_remove(struct platform_device *pdev)
 {
 	struct drm_device *drm = platform_get_drvdata(pdev);
-	struct mcde *mcde = drm->dev_private;
+	struct mcde *mcde = to_mcde(drm);
 
 	component_master_del(&pdev->dev, &mcde_drm_comp_ops);
 	clk_disable_unprepare(mcde->mcde_clk);
 	regulator_disable(mcde->vana);
 	regulator_disable(mcde->epod);
-	drm_dev_put(drm);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c
index 7af5ebb0c436..1baa2324cdb9 100644
--- a/drivers/gpu/drm/mcde/mcde_dsi.c
+++ b/drivers/gpu/drm/mcde/mcde_dsi.c
@@ -1020,7 +1020,7 @@ static int mcde_dsi_bind(struct device *dev, struct device *master,
 			 void *data)
 {
 	struct drm_device *drm = data;
-	struct mcde *mcde = drm->dev_private;
+	struct mcde *mcde = to_mcde(drm);
 	struct mcde_dsi *d = dev_get_drvdata(dev);
 	struct device_node *child;
 	struct drm_panel *panel = NULL;
diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig
index fa5ffc4fe823..c420f5a3d33b 100644
--- a/drivers/gpu/drm/mediatek/Kconfig
+++ b/drivers/gpu/drm/mediatek/Kconfig
@@ -11,6 +11,7 @@ config DRM_MEDIATEK
 	select DRM_MIPI_DSI
 	select DRM_PANEL
 	select MEMORY
+	select MTK_MMSYS
 	select MTK_SMI
 	select VIDEOMODE_HELPERS
 	help
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_color.c b/drivers/gpu/drm/mediatek/mtk_disp_color.c
index 6fb0d6983a4a..3ae9c810845b 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_color.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_color.c
@@ -119,7 +119,10 @@ static int mtk_disp_color_probe(struct platform_device *pdev)
 	ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
 				&mtk_disp_color_funcs);
 	if (ret) {
-		dev_err(dev, "Failed to initialize component: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to initialize component: %d\n",
+				ret);
+
 		return ret;
 	}
 
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 891d80c73e04..28651bc579bc 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -386,7 +386,10 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 	ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
 				&mtk_disp_ovl_funcs);
 	if (ret) {
-		dev_err(dev, "Failed to initialize component: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to initialize component: %d\n",
+				ret);
+
 		return ret;
 	}
 
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index 0cb848d64206..e04319fedf46 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -294,7 +294,10 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
 	ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
 				&mtk_disp_rdma_funcs);
 	if (ret) {
-		dev_err(dev, "Failed to initialize component: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to initialize component: %d\n",
+				ret);
+
 		return ret;
 	}
 
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 4f0ce4cd5b8c..e290407db166 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -20,6 +20,7 @@
 #include <drm/drm_bridge.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_of.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "mtk_dpi_regs.h"
 #include "mtk_drm_ddp_comp.h"
@@ -509,15 +510,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	return 0;
 }
 
-static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
-	.destroy = mtk_dpi_encoder_destroy,
-};
-
 static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
 				       const struct drm_display_mode *mode,
 				       struct drm_display_mode *adjusted_mode)
@@ -596,8 +588,8 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
-	ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
-			       DRM_MODE_ENCODER_TMDS, NULL);
+	ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
+				      DRM_MODE_ENCODER_TMDS);
 	if (ret) {
 		dev_err(dev, "Failed to initialize decoder: %d\n", ret);
 		goto err_unregister;
@@ -716,21 +708,27 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	dpi->engine_clk = devm_clk_get(dev, "engine");
 	if (IS_ERR(dpi->engine_clk)) {
 		ret = PTR_ERR(dpi->engine_clk);
-		dev_err(dev, "Failed to get engine clock: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get engine clock: %d\n", ret);
+
 		return ret;
 	}
 
 	dpi->pixel_clk = devm_clk_get(dev, "pixel");
 	if (IS_ERR(dpi->pixel_clk)) {
 		ret = PTR_ERR(dpi->pixel_clk);
-		dev_err(dev, "Failed to get pixel clock: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get pixel clock: %d\n", ret);
+
 		return ret;
 	}
 
 	dpi->tvd_clk = devm_clk_get(dev, "pll");
 	if (IS_ERR(dpi->tvd_clk)) {
 		ret = PTR_ERR(dpi->tvd_clk);
-		dev_err(dev, "Failed to get tvdpll clock: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get tvdpll clock: %d\n", ret);
+
 		return ret;
 	}
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index fe85e487e477..fe46c4bac64d 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -6,6 +6,7 @@
 #include <linux/clk.h>
 #include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
+#include <linux/soc/mediatek/mtk-mmsys.h>
 
 #include <asm/barrier.h>
 #include <soc/mediatek/smi.h>
@@ -28,7 +29,7 @@
  * @enabled: records whether crtc_enable succeeded
  * @planes: array of 4 drm_plane structures, one for each overlay plane
  * @pending_planes: whether any plane has pending changes to be applied
- * @config_regs: memory mapped mmsys configuration register space
+ * @mmsys_dev: pointer to the mmsys device for configuration registers
  * @mutex: handle to one of the ten disp_mutex streams
  * @ddp_comp_nr: number of components in ddp_comp
  * @ddp_comp: array of pointers the mtk_ddp_comp structures used by this crtc
@@ -50,7 +51,7 @@ struct mtk_drm_crtc {
 	u32				cmdq_event;
 #endif
 
-	void __iomem			*config_regs;
+	struct device			*mmsys_dev;
 	struct mtk_disp_mutex		*mutex;
 	unsigned int			ddp_comp_nr;
 	struct mtk_ddp_comp		**ddp_comp;
@@ -300,9 +301,9 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 
 	DRM_DEBUG_DRIVER("mediatek_ddp_ddp_path_setup\n");
 	for (i = 0; i < mtk_crtc->ddp_comp_nr - 1; i++) {
-		mtk_ddp_add_comp_to_path(mtk_crtc->config_regs,
-					 mtk_crtc->ddp_comp[i]->id,
-					 mtk_crtc->ddp_comp[i + 1]->id);
+		mtk_mmsys_ddp_connect(mtk_crtc->mmsys_dev,
+				      mtk_crtc->ddp_comp[i]->id,
+				      mtk_crtc->ddp_comp[i + 1]->id);
 		mtk_disp_mutex_add_comp(mtk_crtc->mutex,
 					mtk_crtc->ddp_comp[i]->id);
 	}
@@ -360,9 +361,9 @@ static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc)
 					   mtk_crtc->ddp_comp[i]->id);
 	mtk_disp_mutex_disable(mtk_crtc->mutex);
 	for (i = 0; i < mtk_crtc->ddp_comp_nr - 1; i++) {
-		mtk_ddp_remove_comp_from_path(mtk_crtc->config_regs,
-					      mtk_crtc->ddp_comp[i]->id,
-					      mtk_crtc->ddp_comp[i + 1]->id);
+		mtk_mmsys_ddp_disconnect(mtk_crtc->mmsys_dev,
+					 mtk_crtc->ddp_comp[i]->id,
+					 mtk_crtc->ddp_comp[i + 1]->id);
 		mtk_disp_mutex_remove_comp(mtk_crtc->mutex,
 					   mtk_crtc->ddp_comp[i]->id);
 	}
@@ -766,7 +767,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 	if (!mtk_crtc)
 		return -ENOMEM;
 
-	mtk_crtc->config_regs = priv->config_regs;
+	mtk_crtc->mmsys_dev = priv->mmsys_dev;
 	mtk_crtc->ddp_comp_nr = path_len;
 	mtk_crtc->ddp_comp = devm_kmalloc_array(dev, mtk_crtc->ddp_comp_nr,
 						sizeof(*mtk_crtc->ddp_comp),
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 13035c906035..014c1bbe1df2 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -13,26 +13,6 @@
 #include "mtk_drm_ddp.h"
 #include "mtk_drm_ddp_comp.h"
 
-#define DISP_REG_CONFIG_DISP_OVL0_MOUT_EN	0x040
-#define DISP_REG_CONFIG_DISP_OVL1_MOUT_EN	0x044
-#define DISP_REG_CONFIG_DISP_OD_MOUT_EN		0x048
-#define DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN	0x04c
-#define DISP_REG_CONFIG_DISP_UFOE_MOUT_EN	0x050
-#define DISP_REG_CONFIG_DISP_COLOR0_SEL_IN	0x084
-#define DISP_REG_CONFIG_DISP_COLOR1_SEL_IN	0x088
-#define DISP_REG_CONFIG_DSIE_SEL_IN		0x0a4
-#define DISP_REG_CONFIG_DSIO_SEL_IN		0x0a8
-#define DISP_REG_CONFIG_DPI_SEL_IN		0x0ac
-#define DISP_REG_CONFIG_DISP_RDMA2_SOUT		0x0b8
-#define DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN	0x0c4
-#define DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN	0x0c8
-#define DISP_REG_CONFIG_MMSYS_CG_CON0		0x100
-
-#define DISP_REG_CONFIG_DISP_OVL_MOUT_EN	0x030
-#define DISP_REG_CONFIG_OUT_SEL			0x04c
-#define DISP_REG_CONFIG_DSI_SEL			0x050
-#define DISP_REG_CONFIG_DPI_SEL			0x064
-
 #define MT2701_DISP_MUTEX0_MOD0			0x2c
 #define MT2701_DISP_MUTEX0_SOF0			0x30
 
@@ -94,48 +74,6 @@
 #define MUTEX_SOF_DSI2			5
 #define MUTEX_SOF_DSI3			6
 
-#define OVL0_MOUT_EN_COLOR0		0x1
-#define OD_MOUT_EN_RDMA0		0x1
-#define OD1_MOUT_EN_RDMA1		BIT(16)
-#define UFOE_MOUT_EN_DSI0		0x1
-#define COLOR0_SEL_IN_OVL0		0x1
-#define OVL1_MOUT_EN_COLOR1		0x1
-#define GAMMA_MOUT_EN_RDMA1		0x1
-#define RDMA0_SOUT_DPI0			0x2
-#define RDMA0_SOUT_DPI1			0x3
-#define RDMA0_SOUT_DSI1			0x1
-#define RDMA0_SOUT_DSI2			0x4
-#define RDMA0_SOUT_DSI3			0x5
-#define RDMA1_SOUT_DPI0			0x2
-#define RDMA1_SOUT_DPI1			0x3
-#define RDMA1_SOUT_DSI1			0x1
-#define RDMA1_SOUT_DSI2			0x4
-#define RDMA1_SOUT_DSI3			0x5
-#define RDMA2_SOUT_DPI0			0x2
-#define RDMA2_SOUT_DPI1			0x3
-#define RDMA2_SOUT_DSI1			0x1
-#define RDMA2_SOUT_DSI2			0x4
-#define RDMA2_SOUT_DSI3			0x5
-#define DPI0_SEL_IN_RDMA1		0x1
-#define DPI0_SEL_IN_RDMA2		0x3
-#define DPI1_SEL_IN_RDMA1		(0x1 << 8)
-#define DPI1_SEL_IN_RDMA2		(0x3 << 8)
-#define DSI0_SEL_IN_RDMA1		0x1
-#define DSI0_SEL_IN_RDMA2		0x4
-#define DSI1_SEL_IN_RDMA1		0x1
-#define DSI1_SEL_IN_RDMA2		0x4
-#define DSI2_SEL_IN_RDMA1		(0x1 << 16)
-#define DSI2_SEL_IN_RDMA2		(0x4 << 16)
-#define DSI3_SEL_IN_RDMA1		(0x1 << 16)
-#define DSI3_SEL_IN_RDMA2		(0x4 << 16)
-#define COLOR1_SEL_IN_OVL1		0x1
-
-#define OVL_MOUT_EN_RDMA		0x1
-#define BLS_TO_DSI_RDMA1_TO_DPI1	0x8
-#define BLS_TO_DPI_RDMA1_TO_DSI		0x2
-#define DSI_SEL_IN_BLS			0x0
-#define DPI_SEL_IN_BLS			0x0
-#define DSI_SEL_IN_RDMA			0x1
 
 struct mtk_disp_mutex {
 	int id;
@@ -246,200 +184,6 @@ static const struct mtk_ddp_data mt8173_ddp_driver_data = {
 	.mutex_sof_reg = MT2701_DISP_MUTEX0_SOF0,
 };
 
-static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
-				    enum mtk_ddp_comp_id next,
-				    unsigned int *addr)
-{
-	unsigned int value;
-
-	if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_COLOR0) {
-		*addr = DISP_REG_CONFIG_DISP_OVL0_MOUT_EN;
-		value = OVL0_MOUT_EN_COLOR0;
-	} else if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_RDMA0) {
-		*addr = DISP_REG_CONFIG_DISP_OVL_MOUT_EN;
-		value = OVL_MOUT_EN_RDMA;
-	} else if (cur == DDP_COMPONENT_OD0 && next == DDP_COMPONENT_RDMA0) {
-		*addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
-		value = OD_MOUT_EN_RDMA0;
-	} else if (cur == DDP_COMPONENT_UFOE && next == DDP_COMPONENT_DSI0) {
-		*addr = DISP_REG_CONFIG_DISP_UFOE_MOUT_EN;
-		value = UFOE_MOUT_EN_DSI0;
-	} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
-		*addr = DISP_REG_CONFIG_DISP_OVL1_MOUT_EN;
-		value = OVL1_MOUT_EN_COLOR1;
-	} else if (cur == DDP_COMPONENT_GAMMA && next == DDP_COMPONENT_RDMA1) {
-		*addr = DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN;
-		value = GAMMA_MOUT_EN_RDMA1;
-	} else if (cur == DDP_COMPONENT_OD1 && next == DDP_COMPONENT_RDMA1) {
-		*addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
-		value = OD1_MOUT_EN_RDMA1;
-	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI0) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
-		value = RDMA0_SOUT_DPI0;
-	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI1) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
-		value = RDMA0_SOUT_DPI1;
-	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI1) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
-		value = RDMA0_SOUT_DSI1;
-	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI2) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
-		value = RDMA0_SOUT_DSI2;
-	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI3) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
-		value = RDMA0_SOUT_DSI3;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI1) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
-		value = RDMA1_SOUT_DSI1;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI2) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
-		value = RDMA1_SOUT_DSI2;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI3) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
-		value = RDMA1_SOUT_DSI3;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
-		value = RDMA1_SOUT_DPI0;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
-		value = RDMA1_SOUT_DPI1;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
-		value = RDMA2_SOUT_DPI0;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
-		value = RDMA2_SOUT_DPI1;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI1) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
-		value = RDMA2_SOUT_DSI1;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
-		value = RDMA2_SOUT_DSI2;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) {
-		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
-		value = RDMA2_SOUT_DSI3;
-	} else {
-		value = 0;
-	}
-
-	return value;
-}
-
-static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
-				   enum mtk_ddp_comp_id next,
-				   unsigned int *addr)
-{
-	unsigned int value;
-
-	if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_COLOR0) {
-		*addr = DISP_REG_CONFIG_DISP_COLOR0_SEL_IN;
-		value = COLOR0_SEL_IN_OVL0;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
-		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
-		value = DPI0_SEL_IN_RDMA1;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
-		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
-		value = DPI1_SEL_IN_RDMA1;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI0) {
-		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
-		value = DSI0_SEL_IN_RDMA1;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI1) {
-		*addr = DISP_REG_CONFIG_DSIO_SEL_IN;
-		value = DSI1_SEL_IN_RDMA1;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI2) {
-		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
-		value = DSI2_SEL_IN_RDMA1;
-	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI3) {
-		*addr = DISP_REG_CONFIG_DSIO_SEL_IN;
-		value = DSI3_SEL_IN_RDMA1;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
-		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
-		value = DPI0_SEL_IN_RDMA2;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
-		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
-		value = DPI1_SEL_IN_RDMA2;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI0) {
-		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
-		value = DSI0_SEL_IN_RDMA2;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI1) {
-		*addr = DISP_REG_CONFIG_DSIO_SEL_IN;
-		value = DSI1_SEL_IN_RDMA2;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) {
-		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
-		value = DSI2_SEL_IN_RDMA2;
-	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) {
-		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
-		value = DSI3_SEL_IN_RDMA2;
-	} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
-		*addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
-		value = COLOR1_SEL_IN_OVL1;
-	} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
-		*addr = DISP_REG_CONFIG_DSI_SEL;
-		value = DSI_SEL_IN_BLS;
-	} else {
-		value = 0;
-	}
-
-	return value;
-}
-
-static void mtk_ddp_sout_sel(void __iomem *config_regs,
-			     enum mtk_ddp_comp_id cur,
-			     enum mtk_ddp_comp_id next)
-{
-	if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
-		writel_relaxed(BLS_TO_DSI_RDMA1_TO_DPI1,
-			       config_regs + DISP_REG_CONFIG_OUT_SEL);
-	} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
-		writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
-			       config_regs + DISP_REG_CONFIG_OUT_SEL);
-		writel_relaxed(DSI_SEL_IN_RDMA,
-			       config_regs + DISP_REG_CONFIG_DSI_SEL);
-		writel_relaxed(DPI_SEL_IN_BLS,
-			       config_regs + DISP_REG_CONFIG_DPI_SEL);
-	}
-}
-
-void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
-			      enum mtk_ddp_comp_id cur,
-			      enum mtk_ddp_comp_id next)
-{
-	unsigned int addr, value, reg;
-
-	value = mtk_ddp_mout_en(cur, next, &addr);
-	if (value) {
-		reg = readl_relaxed(config_regs + addr) | value;
-		writel_relaxed(reg, config_regs + addr);
-	}
-
-	mtk_ddp_sout_sel(config_regs, cur, next);
-
-	value = mtk_ddp_sel_in(cur, next, &addr);
-	if (value) {
-		reg = readl_relaxed(config_regs + addr) | value;
-		writel_relaxed(reg, config_regs + addr);
-	}
-}
-
-void mtk_ddp_remove_comp_from_path(void __iomem *config_regs,
-				   enum mtk_ddp_comp_id cur,
-				   enum mtk_ddp_comp_id next)
-{
-	unsigned int addr, value, reg;
-
-	value = mtk_ddp_mout_en(cur, next, &addr);
-	if (value) {
-		reg = readl_relaxed(config_regs + addr) & ~value;
-		writel_relaxed(reg, config_regs + addr);
-	}
-
-	value = mtk_ddp_sel_in(cur, next, &addr);
-	if (value) {
-		reg = readl_relaxed(config_regs + addr) & ~value;
-		writel_relaxed(reg, config_regs + addr);
-	}
-}
-
 struct mtk_disp_mutex *mtk_disp_mutex_get(struct device *dev, unsigned int id)
 {
 	struct mtk_ddp *ddp = dev_get_drvdata(dev);
@@ -628,7 +372,8 @@ static int mtk_ddp_probe(struct platform_device *pdev)
 	if (!ddp->data->no_clk) {
 		ddp->clk = devm_clk_get(dev, NULL);
 		if (IS_ERR(ddp->clk)) {
-			dev_err(dev, "Failed to get clock\n");
+			if (PTR_ERR(ddp->clk) != -EPROBE_DEFER)
+				dev_err(dev, "Failed to get clock\n");
 			return PTR_ERR(ddp->clk);
 		}
 	}
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp.h
index 827be424a148..6b691a57be4a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.h
@@ -12,13 +12,6 @@ struct regmap;
 struct device;
 struct mtk_disp_mutex;
 
-void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
-			      enum mtk_ddp_comp_id cur,
-			      enum mtk_ddp_comp_id next);
-void mtk_ddp_remove_comp_from_path(void __iomem *config_regs,
-				   enum mtk_ddp_comp_id cur,
-				   enum mtk_ddp_comp_id next);
-
 struct mtk_disp_mutex *mtk_disp_mutex_get(struct device *dev, unsigned int id);
 int mtk_disp_mutex_prepare(struct mtk_disp_mutex *mutex);
 void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 0563c6813333..6bd369434d9d 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -10,6 +10,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
+#include <linux/soc/mediatek/mtk-mmsys.h>
 #include <linux/dma-mapping.h>
 
 #include <drm/drm_atomic.h>
@@ -162,7 +163,9 @@ static int mtk_drm_kms_init(struct drm_device *drm)
 	}
 	private->mutex_dev = &pdev->dev;
 
-	drm_mode_config_init(drm);
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ret;
 
 	drm->mode_config.min_width = 64;
 	drm->mode_config.min_height = 64;
@@ -179,7 +182,7 @@ static int mtk_drm_kms_init(struct drm_device *drm)
 
 	ret = component_bind_all(drm->dev, drm);
 	if (ret)
-		goto err_config_cleanup;
+		return ret;
 
 	/*
 	 * We currently support two fixed data streams, each optional,
@@ -255,8 +258,6 @@ static int mtk_drm_kms_init(struct drm_device *drm)
 		dma_dev->dma_parms = NULL;
 err_component_unbind:
 	component_unbind_all(drm->dev, drm);
-err_config_cleanup:
-	drm_mode_config_cleanup(drm);
 
 	return ret;
 }
@@ -272,7 +273,6 @@ static void mtk_drm_kms_deinit(struct drm_device *drm)
 		private->dma_dev->dma_parms = NULL;
 
 	component_unbind_all(drm->dev, drm);
-	drm_mode_config_cleanup(drm);
 }
 
 static const struct file_operations mtk_drm_fops = {
@@ -348,9 +348,7 @@ static int mtk_drm_bind(struct device *dev)
 	if (ret < 0)
 		goto err_deinit;
 
-	ret = drm_fbdev_generic_setup(drm, 32);
-	if (ret)
-		DRM_ERROR("Failed to initialize fbdev: %d\n", ret);
+	drm_fbdev_generic_setup(drm, 32);
 
 	return 0;
 
@@ -421,11 +419,22 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
 	{ }
 };
 
+static const struct of_device_id mtk_drm_of_ids[] = {
+	{ .compatible = "mediatek,mt2701-mmsys",
+	  .data = &mt2701_mmsys_driver_data},
+	{ .compatible = "mediatek,mt2712-mmsys",
+	  .data = &mt2712_mmsys_driver_data},
+	{ .compatible = "mediatek,mt8173-mmsys",
+	  .data = &mt8173_mmsys_driver_data},
+	{ }
+};
+
 static int mtk_drm_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct device_node *phandle = dev->parent->of_node;
+	const struct of_device_id *of_id;
 	struct mtk_drm_private *private;
-	struct resource *mem;
 	struct device_node *node;
 	struct component_match *match = NULL;
 	int ret;
@@ -436,18 +445,20 @@ static int mtk_drm_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	private->data = of_device_get_match_data(dev);
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	private->config_regs = devm_ioremap_resource(dev, mem);
-	if (IS_ERR(private->config_regs)) {
-		ret = PTR_ERR(private->config_regs);
-		dev_err(dev, "Failed to ioremap mmsys-config resource: %d\n",
-			ret);
-		return ret;
+	private->mmsys_dev = dev->parent;
+	if (!private->mmsys_dev) {
+		dev_err(dev, "Failed to get MMSYS device\n");
+		return -ENODEV;
 	}
 
+	of_id = of_match_node(mtk_drm_of_ids, phandle);
+	if (!of_id)
+		return -ENODEV;
+
+	private->data = of_id->data;
+
 	/* Iterate over sibling DISP function blocks */
-	for_each_child_of_node(dev->of_node->parent, node) {
+	for_each_child_of_node(phandle->parent, node) {
 		const struct of_device_id *of_id;
 		enum mtk_ddp_comp_type comp_type;
 		int comp_id;
@@ -581,22 +592,11 @@ static int mtk_drm_sys_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(mtk_drm_pm_ops, mtk_drm_sys_suspend,
 			 mtk_drm_sys_resume);
 
-static const struct of_device_id mtk_drm_of_ids[] = {
-	{ .compatible = "mediatek,mt2701-mmsys",
-	  .data = &mt2701_mmsys_driver_data},
-	{ .compatible = "mediatek,mt2712-mmsys",
-	  .data = &mt2712_mmsys_driver_data},
-	{ .compatible = "mediatek,mt8173-mmsys",
-	  .data = &mt8173_mmsys_driver_data},
-	{ }
-};
-
 static struct platform_driver mtk_drm_platform_driver = {
 	.probe	= mtk_drm_probe,
 	.remove	= mtk_drm_remove,
 	.driver	= {
 		.name	= "mediatek-drm",
-		.of_match_table = mtk_drm_of_ids,
 		.pm     = &mtk_drm_pm_ops,
 	},
 };
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index 17bc99b9f5d4..b5be63e53176 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -39,7 +39,7 @@ struct mtk_drm_private {
 
 	struct device_node *mutex_node;
 	struct device *mutex_dev;
-	void __iomem *config_regs;
+	struct device *mmsys_dev;
 	struct device_node *comp_node[DDP_COMPONENT_ID_MAX];
 	struct mtk_ddp_comp *ddp_comp[DDP_COMPONENT_ID_MAX];
 	const struct mtk_mmsys_driver_data *data;
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 0ede69830a9d..270bf22c98fe 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -22,6 +22,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "mtk_drm_ddp_comp.h"
 
@@ -787,15 +788,6 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
 	dsi->enabled = false;
 }
 
-static void mtk_dsi_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs mtk_dsi_encoder_funcs = {
-	.destroy = mtk_dsi_encoder_destroy,
-};
-
 static bool mtk_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
 				       const struct drm_display_mode *mode,
 				       struct drm_display_mode *adjusted_mode)
@@ -888,8 +880,8 @@ static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
 {
 	int ret;
 
-	ret = drm_encoder_init(drm, &dsi->encoder, &mtk_dsi_encoder_funcs,
-			       DRM_MODE_ENCODER_DSI, NULL);
+	ret = drm_simple_encoder_init(drm, &dsi->encoder,
+				      DRM_MODE_ENCODER_DSI);
 	if (ret) {
 		DRM_ERROR("Failed to encoder init to drm\n");
 		return ret;
@@ -1194,14 +1186,18 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 	dsi->engine_clk = devm_clk_get(dev, "engine");
 	if (IS_ERR(dsi->engine_clk)) {
 		ret = PTR_ERR(dsi->engine_clk);
-		dev_err(dev, "Failed to get engine clock: %d\n", ret);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get engine clock: %d\n", ret);
 		goto err_unregister_host;
 	}
 
 	dsi->digital_clk = devm_clk_get(dev, "digital");
 	if (IS_ERR(dsi->digital_clk)) {
 		ret = PTR_ERR(dsi->digital_clk);
-		dev_err(dev, "Failed to get digital clock: %d\n", ret);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get digital clock: %d\n", ret);
 		goto err_unregister_host;
 	}
 
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index ff43a3d80410..b0555a7cb3b4 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1474,7 +1474,9 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
 
 	ret = mtk_hdmi_get_all_clk(hdmi, np);
 	if (ret) {
-		dev_err(dev, "Failed to get clocks: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get clocks: %d\n", ret);
+
 		return ret;
 	}
 
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index b5f5eb7b4bb9..6f29fab79952 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -284,7 +284,9 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
 	/* Remove early framebuffers (ie. simplefb) */
 	meson_remove_framebuffers();
 
-	drm_mode_config_init(drm);
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		goto free_drm;
 	drm->mode_config.max_width = 3840;
 	drm->mode_config.max_height = 2160;
 	drm->mode_config.funcs = &meson_mode_config_funcs;
@@ -379,7 +381,6 @@ static void meson_drv_unbind(struct device *dev)
 	drm_dev_unregister(drm);
 	drm_irq_uninstall(drm);
 	drm_kms_helper_poll_fini(drm);
-	drm_mode_config_cleanup(drm);
 	drm_dev_put(drm);
 }
 
diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
index d5cbc47835bf..35338ed18209 100644
--- a/drivers/gpu/drm/meson/meson_plane.c
+++ b/drivers/gpu/drm/meson/meson_plane.c
@@ -223,7 +223,7 @@ static void meson_plane_atomic_update(struct drm_plane *plane,
 			priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_16 |
 						OSD_COLOR_MATRIX_16_RGB565;
 			break;
-		};
+		}
 	}
 
 	switch (fb->format->format) {
diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
index 7a5bad2f57d7..3298b7ef18b0 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.c
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
@@ -77,6 +77,8 @@ static int mga_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret)
 		goto err_mgag200_driver_unload;
 
+	drm_fbdev_generic_setup(dev, 0);
+
 	return 0;
 
 err_mgag200_driver_unload:
diff --git a/drivers/gpu/drm/mgag200/mgag200_main.c b/drivers/gpu/drm/mgag200/mgag200_main.c
index e278b6a547bd..b680cf47cbb9 100644
--- a/drivers/gpu/drm/mgag200/mgag200_main.c
+++ b/drivers/gpu/drm/mgag200/mgag200_main.c
@@ -181,10 +181,6 @@ int mgag200_driver_load(struct drm_device *dev, unsigned long flags)
 		dev_warn(&dev->pdev->dev,
 			"Could not initialize cursors. Not doing hardware cursors.\n");
 
-	r = drm_fbdev_generic_setup(mdev->dev, 0);
-	if (r)
-		goto err_modeset;
-
 	return 0;
 
 err_modeset:
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_debugfs.c b/drivers/gpu/drm/msm/adreno/a5xx_debugfs.c
index 075ecce4b5e0..8cae2ca4af6b 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_debugfs.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_debugfs.c
@@ -148,27 +148,19 @@ reset_set(void *data, u64 val)
 DEFINE_SIMPLE_ATTRIBUTE(reset_fops, NULL, reset_set, "%llx\n");
 
 
-int a5xx_debugfs_init(struct msm_gpu *gpu, struct drm_minor *minor)
+void a5xx_debugfs_init(struct msm_gpu *gpu, struct drm_minor *minor)
 {
 	struct drm_device *dev;
-	int ret;
 
 	if (!minor)
-		return 0;
+		return;
 
 	dev = minor->dev;
 
-	ret = drm_debugfs_create_files(a5xx_debugfs_list,
-			ARRAY_SIZE(a5xx_debugfs_list),
-			minor->debugfs_root, minor);
-
-	if (ret) {
-		DRM_DEV_ERROR(dev->dev, "could not install a5xx_debugfs_list\n");
-		return ret;
-	}
+	drm_debugfs_create_files(a5xx_debugfs_list,
+				 ARRAY_SIZE(a5xx_debugfs_list),
+				 minor->debugfs_root, minor);
 
 	debugfs_create_file("reset", S_IWUGO, minor->debugfs_root, dev,
 			    &reset_fops);
-
-	return 0;
 }
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.h b/drivers/gpu/drm/msm/adreno/a5xx_gpu.h
index 833468ce6b6d..54868d4e3958 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.h
@@ -41,7 +41,7 @@ struct a5xx_gpu {
 #define to_a5xx_gpu(x) container_of(x, struct a5xx_gpu, base)
 
 #ifdef CONFIG_DEBUG_FS
-int a5xx_debugfs_init(struct msm_gpu *gpu, struct drm_minor *minor);
+void a5xx_debugfs_init(struct msm_gpu *gpu, struct drm_minor *minor);
 #endif
 
 /*
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
index 211f5de99a44..9aba2910d83a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
@@ -170,7 +170,7 @@ struct dpu_global_state
  *
  * Main debugfs documentation is located at,
  *
- * Documentation/filesystems/debugfs.txt
+ * Documentation/filesystems/debugfs.rst
  *
  * @dpu_debugfs_setup_regset32: Initialize data for dpu_debugfs_create_regset32
  * @dpu_debugfs_create_regset32: Create 32-bit register dump file
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
index 47b989834af1..c902c6503675 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
@@ -259,17 +259,9 @@ static struct drm_info_list mdp5_debugfs_list[] = {
 
 static int mdp5_kms_debugfs_init(struct msm_kms *kms, struct drm_minor *minor)
 {
-	struct drm_device *dev = minor->dev;
-	int ret;
-
-	ret = drm_debugfs_create_files(mdp5_debugfs_list,
-			ARRAY_SIZE(mdp5_debugfs_list),
-			minor->debugfs_root, minor);
-
-	if (ret) {
-		DRM_DEV_ERROR(dev->dev, "could not install mdp5_debugfs_list\n");
-		return ret;
-	}
+	drm_debugfs_create_files(mdp5_debugfs_list,
+				 ARRAY_SIZE(mdp5_debugfs_list),
+				 minor->debugfs_root, minor);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/msm/msm_debugfs.c b/drivers/gpu/drm/msm/msm_debugfs.c
index 1c74381a4fc9..ee2e270f464c 100644
--- a/drivers/gpu/drm/msm/msm_debugfs.c
+++ b/drivers/gpu/drm/msm/msm_debugfs.c
@@ -214,31 +214,20 @@ int msm_debugfs_late_init(struct drm_device *dev)
 	return ret;
 }
 
-int msm_debugfs_init(struct drm_minor *minor)
+void msm_debugfs_init(struct drm_minor *minor)
 {
 	struct drm_device *dev = minor->dev;
 	struct msm_drm_private *priv = dev->dev_private;
-	int ret;
-
-	ret = drm_debugfs_create_files(msm_debugfs_list,
-			ARRAY_SIZE(msm_debugfs_list),
-			minor->debugfs_root, minor);
 
-	if (ret) {
-		DRM_DEV_ERROR(dev->dev, "could not install msm_debugfs_list\n");
-		return ret;
-	}
+	drm_debugfs_create_files(msm_debugfs_list,
+				 ARRAY_SIZE(msm_debugfs_list),
+				 minor->debugfs_root, minor);
 
 	debugfs_create_file("gpu", S_IRUSR, minor->debugfs_root,
 		dev, &msm_gpu_fops);
 
-	if (priv->kms && priv->kms->funcs->debugfs_init) {
-		ret = priv->kms->funcs->debugfs_init(priv->kms, minor);
-		if (ret)
-			return ret;
-	}
-
-	return ret;
+	if (priv->kms && priv->kms->funcs->debugfs_init)
+		priv->kms->funcs->debugfs_init(priv->kms, minor);
 }
 #endif
 
diff --git a/drivers/gpu/drm/msm/msm_debugfs.h b/drivers/gpu/drm/msm/msm_debugfs.h
index 2b91f8c178ad..ef58f66abbb3 100644
--- a/drivers/gpu/drm/msm/msm_debugfs.h
+++ b/drivers/gpu/drm/msm/msm_debugfs.h
@@ -8,7 +8,7 @@
 #define __MSM_DEBUGFS_H__
 
 #ifdef CONFIG_DEBUG_FS
-int msm_debugfs_init(struct drm_minor *minor);
+void msm_debugfs_init(struct drm_minor *minor);
 #endif
 
 #endif /* __MSM_DEBUGFS_H__ */
diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h
index be5bc2e8425c..6ccae4ba905c 100644
--- a/drivers/gpu/drm/msm/msm_gpu.h
+++ b/drivers/gpu/drm/msm/msm_gpu.h
@@ -57,7 +57,7 @@ struct msm_gpu_funcs {
 	void (*show)(struct msm_gpu *gpu, struct msm_gpu_state *state,
 			struct drm_printer *p);
 	/* for generation specific debugfs: */
-	int (*debugfs_init)(struct msm_gpu *gpu, struct drm_minor *minor);
+	void (*debugfs_init)(struct msm_gpu *gpu, struct drm_minor *minor);
 #endif
 	unsigned long (*gpu_busy)(struct msm_gpu *gpu);
 	struct msm_gpu_state *(*gpu_state_get)(struct msm_gpu *gpu);
diff --git a/drivers/gpu/drm/nouveau/nouveau_debugfs.c b/drivers/gpu/drm/nouveau/nouveau_debugfs.c
index 15a3d40edf02..63cb5e432f8a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_debugfs.c
+++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.c
@@ -217,7 +217,7 @@ static const struct nouveau_debugfs_files {
 	{"pstate", &nouveau_pstate_fops},
 };
 
-int
+void
 nouveau_drm_debugfs_init(struct drm_minor *minor)
 {
 	struct nouveau_drm *drm = nouveau_drm(minor->dev);
@@ -240,12 +240,10 @@ nouveau_drm_debugfs_init(struct drm_minor *minor)
 	 */
 	dentry = debugfs_lookup("vbios.rom", minor->debugfs_root);
 	if (!dentry)
-		return 0;
+		return;
 
 	d_inode(dentry)->i_size = drm->vbios.length;
 	dput(dentry);
-
-	return 0;
 }
 
 int
diff --git a/drivers/gpu/drm/nouveau/nouveau_debugfs.h b/drivers/gpu/drm/nouveau/nouveau_debugfs.h
index 8909c010e8ea..77f0323b38ba 100644
--- a/drivers/gpu/drm/nouveau/nouveau_debugfs.h
+++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.h
@@ -18,15 +18,13 @@ nouveau_debugfs(struct drm_device *dev)
 	return nouveau_drm(dev)->debugfs;
 }
 
-extern int  nouveau_drm_debugfs_init(struct drm_minor *);
+extern void  nouveau_drm_debugfs_init(struct drm_minor *);
 extern int  nouveau_debugfs_init(struct nouveau_drm *);
 extern void nouveau_debugfs_fini(struct nouveau_drm *);
 #else
-static inline int
+static inline void
 nouveau_drm_debugfs_init(struct drm_minor *minor)
-{
-       return 0;
-}
+{}
 
 static inline int
 nouveau_debugfs_init(struct nouveau_drm *drm)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ic.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ic.c
index 03b355dabab3..abf3eda683f0 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ic.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ic.c
@@ -36,8 +36,8 @@ probe_monitoring_device(struct nvkm_i2c_bus *bus,
 
 	request_module("%s%s", I2C_MODULE_PREFIX, info->type);
 
-	client = i2c_new_device(&bus->i2c, info);
-	if (!client)
+	client = i2c_new_client_device(&bus->i2c, info);
+	if (IS_ERR(client))
 		return false;
 
 	if (!client->dev.driver ||
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index 766553bb2f87..9701843ccf09 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -208,49 +208,6 @@ static const struct venc_config venc_config_ntsc_trm = {
 	.gen_ctrl				= 0x00F90000,
 };
 
-static const struct venc_config venc_config_pal_bdghi = {
-	.f_control				= 0,
-	.vidout_ctrl				= 0,
-	.sync_ctrl				= 0,
-	.hfltr_ctrl				= 0,
-	.x_color				= 0,
-	.line21					= 0,
-	.ln_sel					= 21,
-	.htrigger_vtrigger			= 0,
-	.tvdetgp_int_start_stop_x		= 0x00140001,
-	.tvdetgp_int_start_stop_y		= 0x00010001,
-	.gen_ctrl				= 0x00FB0000,
-
-	.llen					= 864-1,
-	.flens					= 625-1,
-	.cc_carr_wss_carr			= 0x2F7625ED,
-	.c_phase				= 0xDF,
-	.gain_u					= 0x111,
-	.gain_v					= 0x181,
-	.gain_y					= 0x140,
-	.black_level				= 0x3e,
-	.blank_level				= 0x3e,
-	.m_control				= 0<<2 | 1<<1,
-	.bstamp_wss_data			= 0x42,
-	.s_carr					= 0x2a098acb,
-	.l21__wc_ctl				= 0<<13 | 0x16<<8 | 0<<0,
-	.savid__eavid				= 0x06A70108,
-	.flen__fal				= 23<<16 | 624<<0,
-	.lal__phase_reset			= 2<<17 | 310<<0,
-	.hs_int_start_stop_x			= 0x00920358,
-	.hs_ext_start_stop_x			= 0x000F035F,
-	.vs_int_start_x				= 0x1a7<<16,
-	.vs_int_stop_x__vs_int_start_y		= 0x000601A7,
-	.vs_int_stop_y__vs_ext_start_x		= 0x01AF0036,
-	.vs_ext_stop_x__vs_ext_start_y		= 0x27101af,
-	.vs_ext_stop_y				= 0x05,
-	.avid_start_stop_x			= 0x03530082,
-	.avid_start_stop_y			= 0x0270002E,
-	.fid_int_start_x__fid_int_start_y	= 0x0005008A,
-	.fid_int_offset_y__fid_ext_start_x	= 0x002E0138,
-	.fid_ext_start_y__fid_ext_offset_y	= 0x01380005,
-};
-
 enum venc_videomode {
 	VENC_MODE_UNKNOWN,
 	VENC_MODE_PAL,
diff --git a/drivers/gpu/drm/omapdrm/omap_debugfs.c b/drivers/gpu/drm/omapdrm/omap_debugfs.c
index 34dfb33145b4..b57fbe8a0ac2 100644
--- a/drivers/gpu/drm/omapdrm/omap_debugfs.c
+++ b/drivers/gpu/drm/omapdrm/omap_debugfs.c
@@ -80,31 +80,16 @@ static struct drm_info_list omap_dmm_debugfs_list[] = {
 	{"tiler_map", tiler_map_show, 0},
 };
 
-int omap_debugfs_init(struct drm_minor *minor)
+void omap_debugfs_init(struct drm_minor *minor)
 {
-	struct drm_device *dev = minor->dev;
-	int ret;
-
-	ret = drm_debugfs_create_files(omap_debugfs_list,
-			ARRAY_SIZE(omap_debugfs_list),
-			minor->debugfs_root, minor);
-
-	if (ret) {
-		dev_err(dev->dev, "could not install omap_debugfs_list\n");
-		return ret;
-	}
+	drm_debugfs_create_files(omap_debugfs_list,
+				 ARRAY_SIZE(omap_debugfs_list),
+				 minor->debugfs_root, minor);
 
 	if (dmm_is_available())
-		ret = drm_debugfs_create_files(omap_dmm_debugfs_list,
-				ARRAY_SIZE(omap_dmm_debugfs_list),
-				minor->debugfs_root, minor);
-
-	if (ret) {
-		dev_err(dev->dev, "could not install omap_dmm_debugfs_list\n");
-		return ret;
-	}
-
-	return ret;
+		drm_debugfs_create_files(omap_dmm_debugfs_list,
+					 ARRAY_SIZE(omap_dmm_debugfs_list),
+					 minor->debugfs_root, minor);
 }
 
 #endif
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 7c4b66efcaa7..8a1fac680138 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -82,6 +82,6 @@ struct omap_drm_private {
 };
 
 
-int omap_debugfs_init(struct drm_minor *minor);
+void omap_debugfs_init(struct drm_minor *minor);
 
 #endif /* __OMAPDRM_DRV_H__ */
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index a1723c1b5fbf..d56258b9fcaf 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -137,6 +137,17 @@ config DRM_PANEL_KINGDISPLAY_KD097D04
 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
 	  the host and has a built-in LED backlight.
 
+config DRM_PANEL_LEADTEK_LTK050H3146W
+	tristate "Leadtek LTK050H3146W panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Leadtek LTK050H3146W
+	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
 config DRM_PANEL_LEADTEK_LTK500HD1829
 	tristate "Leadtek LTK500HD1829 panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 96a883cd6630..2335a1e32ae0 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
 obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
+obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
 obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
 obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 48a164257d18..f89861c8598a 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -696,6 +696,34 @@ static const struct panel_desc auo_b101uan08_3_desc = {
 	.init_cmds = auo_b101uan08_3_init_cmd,
 };
 
+static const struct drm_display_mode boe_tv105wum_nw0_default_mode = {
+	.clock = 159260,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 80,
+	.hsync_end = 1200 + 80 + 24,
+	.htotal = 1200 + 80 + 24 + 60,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 10,
+	.vsync_end = 1920 + 10 + 2,
+	.vtotal = 1920 + 10 + 2 + 14,
+	.vrefresh = 60,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct panel_desc boe_tv105wum_nw0_desc = {
+	.modes = &boe_tv105wum_nw0_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 141,
+		.height_mm = 226,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = boe_init_cmd,
+};
+
 static int boe_panel_get_modes(struct drm_panel *panel,
 			       struct drm_connector *connector)
 {
@@ -834,6 +862,9 @@ static const struct of_device_id boe_of_match[] = {
 	{ .compatible = "auo,b101uan08.3",
 	  .data = &auo_b101uan08_3_desc
 	},
+	{ .compatible = "boe,tv105wum-nw0",
+	  .data = &boe_tv105wum_nw0_desc
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, boe_of_match);
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
index 09935520e606..873b1c7059bd 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
@@ -379,7 +379,7 @@ static int ili9322_init(struct drm_panel *panel, struct ili9322 *ili)
 				"can't set up VCOM amplitude (%d)\n", ret);
 			return ret;
 		}
-	};
+	}
 
 	if (ili->vcom_high != U8_MAX) {
 		ret = regmap_write(ili->regmap, ILI9322_VCOM_HIGH,
@@ -388,7 +388,7 @@ static int ili9322_init(struct drm_panel *panel, struct ili9322 *ili)
 			dev_err(ili->dev, "can't set up VCOM high (%d)\n", ret);
 			return ret;
 		}
-	};
+	}
 
 	/* Set up gamma correction */
 	for (i = 0; i < ARRAY_SIZE(ili->gamma); i++) {
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
new file mode 100644
index 000000000000..5a7a31c8513e
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/display_timing.h>
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+struct ltk050h3146w_cmd {
+	char cmd;
+	char data;
+};
+
+struct ltk050h3146w;
+struct ltk050h3146w_desc {
+	const struct drm_display_mode *mode;
+	int (*init)(struct ltk050h3146w *ctx);
+};
+
+struct ltk050h3146w {
+	struct device *dev;
+	struct drm_panel panel;
+	struct gpio_desc *reset_gpio;
+	struct regulator *vci;
+	struct regulator *iovcc;
+	const struct ltk050h3146w_desc *panel_desc;
+	bool prepared;
+};
+
+static const struct ltk050h3146w_cmd page1_cmds[] = {
+	{ 0x22, 0x0A }, /* BGR SS GS */
+	{ 0x31, 0x00 }, /* column inversion */
+	{ 0x53, 0xA2 }, /* VCOM1 */
+	{ 0x55, 0xA2 }, /* VCOM2 */
+	{ 0x50, 0x81 }, /* VREG1OUT=5V */
+	{ 0x51, 0x85 }, /* VREG2OUT=-5V */
+	{ 0x62, 0x0D }, /* EQT Time setting */
+/*
+ * The vendor init selected page 1 here _again_
+ * Is this supposed to be page 2?
+ */
+	{ 0xA0, 0x00 },
+	{ 0xA1, 0x1A },
+	{ 0xA2, 0x28 },
+	{ 0xA3, 0x13 },
+	{ 0xA4, 0x16 },
+	{ 0xA5, 0x29 },
+	{ 0xA6, 0x1D },
+	{ 0xA7, 0x1E },
+	{ 0xA8, 0x84 },
+	{ 0xA9, 0x1C },
+	{ 0xAA, 0x28 },
+	{ 0xAB, 0x75 },
+	{ 0xAC, 0x1A },
+	{ 0xAD, 0x19 },
+	{ 0xAE, 0x4D },
+	{ 0xAF, 0x22 },
+	{ 0xB0, 0x28 },
+	{ 0xB1, 0x54 },
+	{ 0xB2, 0x66 },
+	{ 0xB3, 0x39 },
+	{ 0xC0, 0x00 },
+	{ 0xC1, 0x1A },
+	{ 0xC2, 0x28 },
+	{ 0xC3, 0x13 },
+	{ 0xC4, 0x16 },
+	{ 0xC5, 0x29 },
+	{ 0xC6, 0x1D },
+	{ 0xC7, 0x1E },
+	{ 0xC8, 0x84 },
+	{ 0xC9, 0x1C },
+	{ 0xCA, 0x28 },
+	{ 0xCB, 0x75 },
+	{ 0xCC, 0x1A },
+	{ 0xCD, 0x19 },
+	{ 0xCE, 0x4D },
+	{ 0xCF, 0x22 },
+	{ 0xD0, 0x28 },
+	{ 0xD1, 0x54 },
+	{ 0xD2, 0x66 },
+	{ 0xD3, 0x39 },
+};
+
+static const struct ltk050h3146w_cmd page3_cmds[] = {
+	{ 0x01, 0x00 },
+	{ 0x02, 0x00 },
+	{ 0x03, 0x73 },
+	{ 0x04, 0x00 },
+	{ 0x05, 0x00 },
+	{ 0x06, 0x0a },
+	{ 0x07, 0x00 },
+	{ 0x08, 0x00 },
+	{ 0x09, 0x01 },
+	{ 0x0a, 0x00 },
+	{ 0x0b, 0x00 },
+	{ 0x0c, 0x01 },
+	{ 0x0d, 0x00 },
+	{ 0x0e, 0x00 },
+	{ 0x0f, 0x1d },
+	{ 0x10, 0x1d },
+	{ 0x11, 0x00 },
+	{ 0x12, 0x00 },
+	{ 0x13, 0x00 },
+	{ 0x14, 0x00 },
+	{ 0x15, 0x00 },
+	{ 0x16, 0x00 },
+	{ 0x17, 0x00 },
+	{ 0x18, 0x00 },
+	{ 0x19, 0x00 },
+	{ 0x1a, 0x00 },
+	{ 0x1b, 0x00 },
+	{ 0x1c, 0x00 },
+	{ 0x1d, 0x00 },
+	{ 0x1e, 0x40 },
+	{ 0x1f, 0x80 },
+	{ 0x20, 0x06 },
+	{ 0x21, 0x02 },
+	{ 0x22, 0x00 },
+	{ 0x23, 0x00 },
+	{ 0x24, 0x00 },
+	{ 0x25, 0x00 },
+	{ 0x26, 0x00 },
+	{ 0x27, 0x00 },
+	{ 0x28, 0x33 },
+	{ 0x29, 0x03 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x00 },
+	{ 0x2c, 0x00 },
+	{ 0x2d, 0x00 },
+	{ 0x2e, 0x00 },
+	{ 0x2f, 0x00 },
+	{ 0x30, 0x00 },
+	{ 0x31, 0x00 },
+	{ 0x32, 0x00 },
+	{ 0x33, 0x00 },
+	{ 0x34, 0x04 },
+	{ 0x35, 0x00 },
+	{ 0x36, 0x00 },
+	{ 0x37, 0x00 },
+	{ 0x38, 0x3C },
+	{ 0x39, 0x35 },
+	{ 0x3A, 0x01 },
+	{ 0x3B, 0x40 },
+	{ 0x3C, 0x00 },
+	{ 0x3D, 0x01 },
+	{ 0x3E, 0x00 },
+	{ 0x3F, 0x00 },
+	{ 0x40, 0x00 },
+	{ 0x41, 0x88 },
+	{ 0x42, 0x00 },
+	{ 0x43, 0x00 },
+	{ 0x44, 0x1F },
+	{ 0x50, 0x01 },
+	{ 0x51, 0x23 },
+	{ 0x52, 0x45 },
+	{ 0x53, 0x67 },
+	{ 0x54, 0x89 },
+	{ 0x55, 0xab },
+	{ 0x56, 0x01 },
+	{ 0x57, 0x23 },
+	{ 0x58, 0x45 },
+	{ 0x59, 0x67 },
+	{ 0x5a, 0x89 },
+	{ 0x5b, 0xab },
+	{ 0x5c, 0xcd },
+	{ 0x5d, 0xef },
+	{ 0x5e, 0x11 },
+	{ 0x5f, 0x01 },
+	{ 0x60, 0x00 },
+	{ 0x61, 0x15 },
+	{ 0x62, 0x14 },
+	{ 0x63, 0x0E },
+	{ 0x64, 0x0F },
+	{ 0x65, 0x0C },
+	{ 0x66, 0x0D },
+	{ 0x67, 0x06 },
+	{ 0x68, 0x02 },
+	{ 0x69, 0x07 },
+	{ 0x6a, 0x02 },
+	{ 0x6b, 0x02 },
+	{ 0x6c, 0x02 },
+	{ 0x6d, 0x02 },
+	{ 0x6e, 0x02 },
+	{ 0x6f, 0x02 },
+	{ 0x70, 0x02 },
+	{ 0x71, 0x02 },
+	{ 0x72, 0x02 },
+	{ 0x73, 0x02 },
+	{ 0x74, 0x02 },
+	{ 0x75, 0x01 },
+	{ 0x76, 0x00 },
+	{ 0x77, 0x14 },
+	{ 0x78, 0x15 },
+	{ 0x79, 0x0E },
+	{ 0x7a, 0x0F },
+	{ 0x7b, 0x0C },
+	{ 0x7c, 0x0D },
+	{ 0x7d, 0x06 },
+	{ 0x7e, 0x02 },
+	{ 0x7f, 0x07 },
+	{ 0x80, 0x02 },
+	{ 0x81, 0x02 },
+	{ 0x82, 0x02 },
+	{ 0x83, 0x02 },
+	{ 0x84, 0x02 },
+	{ 0x85, 0x02 },
+	{ 0x86, 0x02 },
+	{ 0x87, 0x02 },
+	{ 0x88, 0x02 },
+	{ 0x89, 0x02 },
+	{ 0x8A, 0x02 },
+};
+
+static const struct ltk050h3146w_cmd page4_cmds[] = {
+	{ 0x70, 0x00 },
+	{ 0x71, 0x00 },
+	{ 0x82, 0x0F }, /* VGH_MOD clamp level=15v */
+	{ 0x84, 0x0F }, /* VGH clamp level 15V */
+	{ 0x85, 0x0D }, /* VGL clamp level (-10V) */
+	{ 0x32, 0xAC },
+	{ 0x8C, 0x80 },
+	{ 0x3C, 0xF5 },
+	{ 0xB5, 0x07 }, /* GAMMA OP */
+	{ 0x31, 0x45 }, /* SOURCE OP */
+	{ 0x3A, 0x24 }, /* PS_EN OFF */
+	{ 0x88, 0x33 }, /* LVD */
+};
+
+static inline
+struct ltk050h3146w *panel_to_ltk050h3146w(struct drm_panel *panel)
+{
+	return container_of(panel, struct ltk050h3146w, panel);
+}
+
+#define dsi_dcs_write_seq(dsi, cmd, seq...) do {			\
+		static const u8 d[] = { seq };				\
+		int ret;						\
+		ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d));	\
+		if (ret < 0)						\
+			return ret;					\
+	} while (0)
+
+static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	/*
+	 * Init sequence was supplied by the panel vendor without much
+	 * documentation.
+	 */
+	dsi_dcs_write_seq(dsi, 0xdf, 0x93, 0x65, 0xf8);
+	dsi_dcs_write_seq(dsi, 0xb0, 0x01, 0x03, 0x02, 0x00, 0x64, 0x06,
+			  0x01);
+	dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0xb5);
+	dsi_dcs_write_seq(dsi, 0xb3, 0x00, 0xb5);
+	dsi_dcs_write_seq(dsi, 0xb7, 0x00, 0xbf, 0x00, 0x00, 0xbf, 0x00);
+
+	dsi_dcs_write_seq(dsi, 0xb9, 0x00, 0xc4, 0x23, 0x07);
+	dsi_dcs_write_seq(dsi, 0xbb, 0x02, 0x01, 0x24, 0x00, 0x28, 0x0f,
+			  0x28, 0x04, 0xcc, 0xcc, 0xcc);
+	dsi_dcs_write_seq(dsi, 0xbc, 0x0f, 0x04);
+	dsi_dcs_write_seq(dsi, 0xbe, 0x1e, 0xf2);
+	dsi_dcs_write_seq(dsi, 0xc0, 0x26, 0x03);
+	dsi_dcs_write_seq(dsi, 0xc1, 0x00, 0x12);
+	dsi_dcs_write_seq(dsi, 0xc3, 0x04, 0x02, 0x02, 0x76, 0x01, 0x80,
+			  0x80);
+	dsi_dcs_write_seq(dsi, 0xc4, 0x24, 0x80, 0xb4, 0x81, 0x12, 0x0f,
+			  0x16, 0x00, 0x00);
+	dsi_dcs_write_seq(dsi, 0xc8, 0x7f, 0x72, 0x67, 0x5d, 0x5d, 0x50,
+			  0x56, 0x41, 0x59, 0x57, 0x55, 0x70, 0x5b, 0x5f,
+			  0x4f, 0x47, 0x38, 0x23, 0x08, 0x7f, 0x72, 0x67,
+			  0x5d, 0x5d, 0x50, 0x56, 0x41, 0x59, 0x57, 0x55,
+			  0x70, 0x5b, 0x5f, 0x4f, 0x47, 0x38, 0x23, 0x08);
+	dsi_dcs_write_seq(dsi, 0xd0, 0x1e, 0x1f, 0x57, 0x58, 0x48, 0x4a,
+			  0x44, 0x46, 0x40, 0x1f, 0x42, 0x1f, 0x1f, 0x1f,
+			  0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
+	dsi_dcs_write_seq(dsi, 0xd1, 0x1e, 0x1f, 0x57, 0x58, 0x49, 0x4b,
+			  0x45, 0x47, 0x41, 0x1f, 0x43, 0x1f, 0x1f, 0x1f,
+			  0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
+	dsi_dcs_write_seq(dsi, 0xd2, 0x1f, 0x1e, 0x17, 0x18, 0x07, 0x05,
+			  0x0b, 0x09, 0x03, 0x1f, 0x01, 0x1f, 0x1f, 0x1f,
+			  0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
+	dsi_dcs_write_seq(dsi, 0xd3, 0x1f, 0x1e, 0x17, 0x18, 0x06, 0x04,
+			  0x0a, 0x08, 0x02, 0x1f, 0x00, 0x1f, 0x1f, 0x1f,
+			  0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
+	dsi_dcs_write_seq(dsi, 0xd4, 0x00, 0x00, 0x00, 0x0c, 0x06, 0x20,
+			  0x01, 0x02, 0x00, 0x60, 0x15, 0xb0, 0x30, 0x03,
+			  0x04, 0x00, 0x60, 0x72, 0x0a, 0x00, 0x60, 0x08);
+	dsi_dcs_write_seq(dsi, 0xd5, 0x00, 0x06, 0x06, 0x00, 0x30, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0xbc, 0x50, 0x00, 0x05,
+			  0x21, 0x00, 0x60);
+	dsi_dcs_write_seq(dsi, 0xdd, 0x2c, 0xa3, 0x00);
+	dsi_dcs_write_seq(dsi, 0xde, 0x02);
+	dsi_dcs_write_seq(dsi, 0xb2, 0x32, 0x1c);
+	dsi_dcs_write_seq(dsi, 0xb7, 0x3b, 0x70, 0x00, 0x04);
+	dsi_dcs_write_seq(dsi, 0xc1, 0x11);
+	dsi_dcs_write_seq(dsi, 0xbb, 0x21, 0x22, 0x23, 0x24, 0x36, 0x37);
+	dsi_dcs_write_seq(dsi, 0xc2, 0x20, 0x38, 0x1e, 0x84);
+	dsi_dcs_write_seq(dsi, 0xde, 0x00);
+
+	ret = mipi_dsi_dcs_set_tear_on(dsi, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n",
+			      ret);
+		return ret;
+	}
+
+	msleep(60);
+
+	return 0;
+}
+
+static const struct drm_display_mode ltk050h3146w_mode = {
+	.hdisplay	= 720,
+	.hsync_start	= 720 + 42,
+	.hsync_end	= 720 + 42 + 8,
+	.htotal		= 720 + 42 + 8 + 42,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 12,
+	.vsync_end	= 1280 + 12 + 4,
+	.vtotal		= 1280 + 12 + 4 + 18,
+	.clock		= 64018,
+	.width_mm	= 62,
+	.height_mm	= 110,
+};
+
+static const struct ltk050h3146w_desc ltk050h3146w_data = {
+	.mode = &ltk050h3146w_mode,
+	.init = ltk050h3146w_init_sequence,
+};
+
+static int ltk050h3146w_a2_select_page(struct ltk050h3146w *ctx, int page)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	u8 d[3] = { 0x98, 0x81, page };
+
+	return mipi_dsi_dcs_write(dsi, 0xff, d, ARRAY_SIZE(d));
+}
+
+static int ltk050h3146w_a2_write_page(struct ltk050h3146w *ctx, int page,
+				      const struct ltk050h3146w_cmd *cmds,
+				      int num)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int i, ret;
+
+	ret = ltk050h3146w_a2_select_page(ctx, page);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "failed to select page %d: %d\n",
+			      page, ret);
+		return ret;
+	}
+
+	for (i = 0; i < num; i++) {
+		ret = mipi_dsi_generic_write(dsi, &cmds[i],
+					     sizeof(struct ltk050h3146w_cmd));
+		if (ret < 0) {
+			DRM_DEV_ERROR(ctx->dev,
+				      "failed to write page %d init cmds: %d\n",
+				       page, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int ltk050h3146w_a2_init_sequence(struct ltk050h3146w *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	/*
+	 * Init sequence was supplied by the panel vendor without much
+	 * documentation.
+	 */
+	ret = ltk050h3146w_a2_write_page(ctx, 3, page3_cmds,
+					 ARRAY_SIZE(page3_cmds));
+	if (ret < 0)
+		return ret;
+
+	ret = ltk050h3146w_a2_write_page(ctx, 4, page4_cmds,
+					 ARRAY_SIZE(page4_cmds));
+	if (ret < 0)
+		return ret;
+
+	ret = ltk050h3146w_a2_write_page(ctx, 1, page1_cmds,
+					 ARRAY_SIZE(page1_cmds));
+	if (ret < 0)
+		return ret;
+
+	ret = ltk050h3146w_a2_select_page(ctx, 0);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "failed to select page 0: %d\n", ret);
+		return ret;
+	}
+
+	/* vendor code called this without param, where there should be one */
+	ret = mipi_dsi_dcs_set_tear_on(dsi, 0);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n",
+			      ret);
+		return ret;
+	}
+
+	msleep(60);
+
+	return 0;
+}
+
+static const struct drm_display_mode ltk050h3146w_a2_mode = {
+	.hdisplay	= 720,
+	.hsync_start	= 720 + 42,
+	.hsync_end	= 720 + 42 + 10,
+	.htotal		= 720 + 42 + 10 + 60,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 18,
+	.vsync_end	= 1280 + 18 + 4,
+	.vtotal		= 1280 + 18 + 4 + 12,
+	.clock		= 65595,
+	.width_mm	= 62,
+	.height_mm	= 110,
+};
+
+static const struct ltk050h3146w_desc ltk050h3146w_a2_data = {
+	.mode = &ltk050h3146w_a2_mode,
+	.init = ltk050h3146w_a2_init_sequence,
+};
+
+static int ltk050h3146w_unprepare(struct drm_panel *panel)
+{
+	struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	if (!ctx->prepared)
+		return 0;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n",
+			      ret);
+		return ret;
+	}
+
+	mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n",
+			      ret);
+		return ret;
+	}
+
+	regulator_disable(ctx->iovcc);
+	regulator_disable(ctx->vci);
+
+	ctx->prepared = false;
+
+	return 0;
+}
+
+static int ltk050h3146w_prepare(struct drm_panel *panel)
+{
+	struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+	ret = regulator_enable(ctx->vci);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev,
+			      "Failed to enable vci supply: %d\n", ret);
+		return ret;
+	}
+	ret = regulator_enable(ctx->iovcc);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev,
+			      "Failed to enable iovcc supply: %d\n", ret);
+		goto disable_vci;
+	}
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(5000, 6000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	msleep(20);
+
+	ret = ctx->panel_desc->init(ctx);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
+			      ret);
+		goto disable_iovcc;
+	}
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+		goto disable_iovcc;
+	}
+
+	/* T9: 120ms */
+	msleep(120);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret);
+		goto disable_iovcc;
+	}
+
+	msleep(50);
+
+	ctx->prepared = true;
+
+	return 0;
+
+disable_iovcc:
+	regulator_disable(ctx->iovcc);
+disable_vci:
+	regulator_disable(ctx->vci);
+	return ret;
+}
+
+static int ltk050h3146w_get_modes(struct drm_panel *panel,
+				  struct drm_connector *connector)
+{
+	struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, ctx->panel_desc->mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs ltk050h3146w_funcs = {
+	.unprepare	= ltk050h3146w_unprepare,
+	.prepare	= ltk050h3146w_prepare,
+	.get_modes	= ltk050h3146w_get_modes,
+};
+
+static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct ltk050h3146w *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->panel_desc = of_device_get_match_data(dev);
+	if (!ctx->panel_desc)
+		return -EINVAL;
+
+	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	ctx->vci = devm_regulator_get(dev, "vci");
+	if (IS_ERR(ctx->vci)) {
+		ret = PTR_ERR(ctx->vci);
+		if (ret != -EPROBE_DEFER)
+			DRM_DEV_ERROR(dev,
+				      "Failed to request vci regulator: %d\n",
+				      ret);
+		return ret;
+	}
+
+	ctx->iovcc = devm_regulator_get(dev, "iovcc");
+	if (IS_ERR(ctx->iovcc)) {
+		ret = PTR_ERR(ctx->iovcc);
+		if (ret != -EPROBE_DEFER)
+			DRM_DEV_ERROR(dev,
+				      "Failed to request iovcc regulator: %d\n",
+				      ret);
+		return ret;
+	}
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
+
+	drm_panel_init(&ctx->panel, &dsi->dev, &ltk050h3146w_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return ret;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ltk050h3146w_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct ltk050h3146w *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = drm_panel_unprepare(&ctx->panel);
+	if (ret < 0)
+		DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
+			      ret);
+
+	ret = drm_panel_disable(&ctx->panel);
+	if (ret < 0)
+		DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
+			      ret);
+}
+
+static int ltk050h3146w_remove(struct mipi_dsi_device *dsi)
+{
+	struct ltk050h3146w *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ltk050h3146w_shutdown(dsi);
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
+			      ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id ltk050h3146w_of_match[] = {
+	{
+		.compatible = "leadtek,ltk050h3146w",
+		.data = &ltk050h3146w_data,
+	},
+	{
+		.compatible = "leadtek,ltk050h3146w-a2",
+		.data = &ltk050h3146w_a2_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ltk050h3146w_of_match);
+
+static struct mipi_dsi_driver ltk050h3146w_driver = {
+	.driver = {
+		.name = "panel-leadtek-ltk050h3146w",
+		.of_match_table = ltk050h3146w_of_match,
+	},
+	.probe	= ltk050h3146w_probe,
+	.remove = ltk050h3146w_remove,
+	.shutdown = ltk050h3146w_shutdown,
+};
+module_mipi_dsi_driver(ltk050h3146w_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
+MODULE_DESCRIPTION("DRM driver for Leadtek LTK050H3146W MIPI DSI panel");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
index 76ecf2de9c44..113ab9c0396b 100644
--- a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
+++ b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
@@ -377,7 +377,7 @@ static const struct drm_display_mode default_mode = {
 	.vsync_end	= 1280 + 30 + 4,
 	.vtotal		= 1280 + 30 + 4 + 12,
 	.vrefresh	= 60,
-	.clock		= 41600,
+	.clock		= 69217,
 	.width_mm	= 62,
 	.height_mm	= 110,
 };
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt39016.c b/drivers/gpu/drm/panel/panel-novatek-nt39016.c
index a470810f7dbe..05cae8d62d56 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt39016.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt39016.c
@@ -49,7 +49,8 @@ enum nt39016_regs {
 #define NT39016_SYSTEM_STANDBY	BIT(1)
 
 struct nt39016_panel_info {
-	struct drm_display_mode display_mode;
+	const struct drm_display_mode *display_modes;
+	unsigned int num_modes;
 	u16 width_mm, height_mm;
 	u32 bus_format, bus_flags;
 };
@@ -212,15 +213,22 @@ static int nt39016_get_modes(struct drm_panel *drm_panel,
 	struct nt39016 *panel = to_nt39016(drm_panel);
 	const struct nt39016_panel_info *panel_info = panel->panel_info;
 	struct drm_display_mode *mode;
+	unsigned int i;
 
-	mode = drm_mode_duplicate(connector->dev, &panel_info->display_mode);
-	if (!mode)
-		return -ENOMEM;
+	for (i = 0; i < panel_info->num_modes; i++) {
+		mode = drm_mode_duplicate(connector->dev,
+					  &panel_info->display_modes[i]);
+		if (!mode)
+			return -ENOMEM;
+
+		drm_mode_set_name(mode);
 
-	drm_mode_set_name(mode);
+		mode->type = DRM_MODE_TYPE_DRIVER;
+		if (panel_info->num_modes == 1)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
 
-	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
-	drm_mode_probed_add(connector, mode);
+		drm_mode_probed_add(connector, mode);
+	}
 
 	connector->display_info.bpc = 8;
 	connector->display_info.width_mm = panel_info->width_mm;
@@ -230,7 +238,7 @@ static int nt39016_get_modes(struct drm_panel *drm_panel,
 					 &panel_info->bus_format, 1);
 	connector->display_info.bus_flags = panel_info->bus_flags;
 
-	return 1;
+	return panel_info->num_modes;
 }
 
 static const struct drm_panel_funcs nt39016_funcs = {
@@ -316,8 +324,8 @@ static int nt39016_remove(struct spi_device *spi)
 	return 0;
 }
 
-static const struct nt39016_panel_info kd035g6_info = {
-	.display_mode = {
+static const struct drm_display_mode kd035g6_display_modes[] = {
+	{	/* 60 Hz */
 		.clock = 6000,
 		.hdisplay = 320,
 		.hsync_start = 320 + 10,
@@ -330,6 +338,24 @@ static const struct nt39016_panel_info kd035g6_info = {
 		.vrefresh = 60,
 		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
 	},
+	{	/* 50 Hz */
+		.clock = 5400,
+		.hdisplay = 320,
+		.hsync_start = 320 + 42,
+		.hsync_end = 320 + 42 + 50,
+		.htotal = 320 + 42 + 50 + 20,
+		.vdisplay = 240,
+		.vsync_start = 240 + 5,
+		.vsync_end = 240 + 5 + 1,
+		.vtotal = 240 + 5 + 1 + 4,
+		.vrefresh = 50,
+		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	},
+};
+
+static const struct nt39016_panel_info kd035g6_info = {
+	.display_modes = kd035g6_display_modes,
+	.num_modes = ARRAY_SIZE(kd035g6_display_modes),
 	.width_mm = 71,
 	.height_mm = 53,
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 3ad828eaefe1..5e56c68fbd3e 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -862,6 +862,31 @@ static const struct panel_desc auo_g104sn02 = {
 	},
 };
 
+static const struct drm_display_mode auo_g121ean01_mode = {
+	.clock = 66700,
+	.hdisplay = 1280,
+	.hsync_start = 1280 + 58,
+	.hsync_end = 1280 + 58 + 8,
+	.htotal = 1280 + 58 + 8 + 70,
+	.vdisplay = 800,
+	.vsync_start = 800 + 6,
+	.vsync_end = 800 + 6 + 4,
+	.vtotal = 800 + 6 + 4 + 10,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc auo_g121ean01 = {
+	.modes = &auo_g121ean01_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 261,
+		.height = 163,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct display_timing auo_g133han01_timings = {
 	.pixelclock = { 134000000, 141200000, 149000000 },
 	.hactive = { 1920, 1920, 1920 },
@@ -892,6 +917,31 @@ static const struct panel_desc auo_g133han01 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
+static const struct drm_display_mode auo_g156xtn01_mode = {
+	.clock = 76000,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 33,
+	.hsync_end = 1366 + 33 + 67,
+	.htotal = 1560,
+	.vdisplay = 768,
+	.vsync_start = 768 + 4,
+	.vsync_end = 768 + 4 + 4,
+	.vtotal = 806,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc auo_g156xtn01 = {
+	.modes = &auo_g156xtn01_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 344,
+		.height = 194,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct display_timing auo_g185han01_timings = {
 	.pixelclock = { 120000000, 144000000, 175000000 },
 	.hactive = { 1920, 1920, 1920 },
@@ -922,6 +972,36 @@ static const struct panel_desc auo_g185han01 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
+static const struct display_timing auo_g190ean01_timings = {
+	.pixelclock = { 90000000, 108000000, 135000000 },
+	.hactive = { 1280, 1280, 1280 },
+	.hfront_porch = { 126, 184, 1266 },
+	.hback_porch = { 84, 122, 844 },
+	.hsync_len = { 70, 102, 704 },
+	.vactive = { 1024, 1024, 1024 },
+	.vfront_porch = { 4, 26, 76 },
+	.vback_porch = { 2, 8, 25 },
+	.vsync_len = { 2, 8, 25 },
+};
+
+static const struct panel_desc auo_g190ean01 = {
+	.timings = &auo_g190ean01_timings,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 376,
+		.height = 301,
+	},
+	.delay = {
+		.prepare = 50,
+		.enable = 200,
+		.disable = 110,
+		.unprepare = 1000,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct display_timing auo_p320hvn03_timings = {
 	.pixelclock = { 106000000, 148500000, 164000000 },
 	.hactive = { 1920, 1920, 1920 },
@@ -1092,6 +1172,36 @@ static const struct panel_desc boe_nv101wxmn51 = {
 	},
 };
 
+static const struct drm_display_mode boe_nv133fhm_n61_modes = {
+	.clock = 147840,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 48,
+	.hsync_end = 1920 + 48 + 32,
+	.htotal = 1920 + 48 + 32 + 200,
+	.vdisplay = 1080,
+	.vsync_start = 1080 + 3,
+	.vsync_end = 1080 + 3 + 6,
+	.vtotal = 1080 + 3 + 6 + 31,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc boe_nv133fhm_n61 = {
+	.modes = &boe_nv133fhm_n61_modes,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 300,
+		.height = 187,
+	},
+	.delay = {
+		.hpd_absent_delay = 200,
+		.unprepare = 500,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
+	.connector_type = DRM_MODE_CONNECTOR_eDP,
+};
+
 static const struct drm_display_mode boe_nv140fhmn49_modes[] = {
 	{
 		.clock = 148500,
@@ -1980,6 +2090,37 @@ static const struct panel_desc innolux_zj070na_01p = {
 	},
 };
 
+static const struct drm_display_mode ivo_m133nwf4_r0_mode = {
+	.clock = 138778,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 24,
+	.hsync_end = 1920 + 24 + 48,
+	.htotal = 1920 + 24 + 48 + 88,
+	.vdisplay = 1080,
+	.vsync_start = 1080 + 3,
+	.vsync_end = 1080 + 3 + 12,
+	.vtotal = 1080 + 3 + 12 + 17,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+
+static const struct panel_desc ivo_m133nwf4_r0 = {
+	.modes = &ivo_m133nwf4_r0_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 294,
+		.height = 165,
+	},
+	.delay = {
+		.hpd_absent_delay = 200,
+		.unprepare = 500,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
+	.connector_type = DRM_MODE_CONNECTOR_eDP,
+};
+
 static const struct display_timing koe_tx14d24vm1bpa_timing = {
 	.pixelclock = { 5580000, 5850000, 6200000 },
 	.hactive = { 320, 320, 320 },
@@ -2168,6 +2309,7 @@ static const struct panel_desc lg_lp120up1 = {
 		.width = 267,
 		.height = 183,
 	},
+	.connector_type = DRM_MODE_CONNECTOR_eDP,
 };
 
 static const struct drm_display_mode lg_lp129qe_mode = {
@@ -3065,6 +3207,32 @@ static const struct panel_desc shelly_sca07010_bfn_lnn = {
 	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
 };
 
+static const struct drm_display_mode starry_kr070pe2t_mode = {
+	.clock = 33000,
+	.hdisplay = 800,
+	.hsync_start = 800 + 209,
+	.hsync_end = 800 + 209 + 1,
+	.htotal = 800 + 209 + 1 + 45,
+	.vdisplay = 480,
+	.vsync_start = 480 + 22,
+	.vsync_end = 480 + 22 + 1,
+	.vtotal = 480 + 22 + 1 + 22,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc starry_kr070pe2t = {
+	.modes = &starry_kr070pe2t_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 152,
+		.height = 86,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode starry_kr122ea0sra_mode = {
 	.clock = 147000,
 	.hdisplay = 1920,
@@ -3454,12 +3622,21 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "auo,g104sn02",
 		.data = &auo_g104sn02,
+	}, {
+		.compatible = "auo,g121ean01",
+		.data = &auo_g121ean01,
 	}, {
 		.compatible = "auo,g133han01",
 		.data = &auo_g133han01,
+	}, {
+		.compatible = "auo,g156xtn01",
+		.data = &auo_g156xtn01,
 	}, {
 		.compatible = "auo,g185han01",
 		.data = &auo_g185han01,
+	}, {
+		.compatible = "auo,g190ean01",
+		.data = &auo_g190ean01,
 	}, {
 		.compatible = "auo,p320hvn03",
 		.data = &auo_p320hvn03,
@@ -3478,6 +3655,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "boe,nv101wxmn51",
 		.data = &boe_nv101wxmn51,
+	}, {
+		.compatible = "boe,nv133fhm-n61",
+		.data = &boe_nv133fhm_n61,
 	}, {
 		.compatible = "boe,nv140fhmn49",
 		.data = &boe_nv140fhmn49,
@@ -3586,6 +3766,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "innolux,zj070na-01p",
 		.data = &innolux_zj070na_01p,
+	}, {
+		.compatible = "ivo,m133nwf4-r0",
+		.data = &ivo_m133nwf4_r0,
 	}, {
 		.compatible = "koe,tx14d24vm1bpa",
 		.data = &koe_tx14d24vm1bpa,
@@ -3715,6 +3898,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "shelly,sca07010-bfn-lnn",
 		.data = &shelly_sca07010_bfn_lnn,
+	}, {
+		.compatible = "starry,kr070pe2t",
+		.data = &starry_kr070pe2t,
 	}, {
 		.compatible = "starry,kr122ea0sra",
 		.data = &starry_kr122ea0sra,
diff --git a/drivers/gpu/drm/panel/panel-truly-nt35597.c b/drivers/gpu/drm/panel/panel-truly-nt35597.c
index 012ca62bf30e..f0ad6081570f 100644
--- a/drivers/gpu/drm/panel/panel-truly-nt35597.c
+++ b/drivers/gpu/drm/panel/panel-truly-nt35597.c
@@ -490,9 +490,7 @@ static int truly_nt35597_panel_add(struct truly_nt35597 *ctx)
 {
 	struct device *dev = ctx->dev;
 	int ret, i;
-	const struct nt35597_config *config;
 
-	config = ctx->config;
 	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
 		ctx->supplies[i].supply = regulator_names[i];
 
diff --git a/drivers/gpu/drm/pl111/Makefile b/drivers/gpu/drm/pl111/Makefile
index 0c70f0e91d21..67d430d433e0 100644
--- a/drivers/gpu/drm/pl111/Makefile
+++ b/drivers/gpu/drm/pl111/Makefile
@@ -3,7 +3,6 @@ pl111_drm-y +=	pl111_display.o \
 		pl111_versatile.o \
 		pl111_drv.o
 
-pl111_drm-$(CONFIG_ARCH_VEXPRESS) += pl111_vexpress.o
 pl111_drm-$(CONFIG_ARCH_NOMADIK) += pl111_nomadik.o
 pl111_drm-$(CONFIG_DEBUG_FS) += pl111_debugfs.o
 
diff --git a/drivers/gpu/drm/pl111/pl111_debugfs.c b/drivers/gpu/drm/pl111/pl111_debugfs.c
index 3c8e82016854..26ca8cdf3e60 100644
--- a/drivers/gpu/drm/pl111/pl111_debugfs.c
+++ b/drivers/gpu/drm/pl111/pl111_debugfs.c
@@ -51,10 +51,10 @@ static const struct drm_info_list pl111_debugfs_list[] = {
 	{"regs", pl111_debugfs_regs, 0},
 };
 
-int
+void
 pl111_debugfs_init(struct drm_minor *minor)
 {
-	return drm_debugfs_create_files(pl111_debugfs_list,
-					ARRAY_SIZE(pl111_debugfs_list),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(pl111_debugfs_list,
+				 ARRAY_SIZE(pl111_debugfs_list),
+				 minor->debugfs_root, minor);
 }
diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h
index 77d2da9a8a7c..ba399bcb792f 100644
--- a/drivers/gpu/drm/pl111/pl111_drm.h
+++ b/drivers/gpu/drm/pl111/pl111_drm.h
@@ -84,6 +84,6 @@ struct pl111_drm_dev_private {
 
 int pl111_display_init(struct drm_device *dev);
 irqreturn_t pl111_irq(int irq, void *data);
-int pl111_debugfs_init(struct drm_minor *minor);
+void pl111_debugfs_init(struct drm_minor *minor);
 
 #endif /* _PL111_DRM_H_ */
diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
index aa8aa8d9e405..da0c39dae874 100644
--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -90,10 +90,13 @@ static int pl111_modeset_init(struct drm_device *dev)
 	struct drm_panel *panel = NULL;
 	struct drm_bridge *bridge = NULL;
 	bool defer = false;
-	int ret = 0;
+	int ret;
 	int i;
 
-	drm_mode_config_init(dev);
+	ret = drmm_mode_config_init(dev);
+	if (ret)
+		return ret;
+
 	mode_config = &dev->mode_config;
 	mode_config->funcs = &mode_config_funcs;
 	mode_config->min_width = 1;
@@ -154,7 +157,7 @@ static int pl111_modeset_init(struct drm_device *dev)
 						    DRM_MODE_CONNECTOR_Unknown);
 		if (IS_ERR(bridge)) {
 			ret = PTR_ERR(bridge);
-			goto out_config;
+			goto finish;
 		}
 	} else if (bridge) {
 		dev_info(dev->dev, "Using non-panel bridge\n");
@@ -197,8 +200,6 @@ static int pl111_modeset_init(struct drm_device *dev)
 out_bridge:
 	if (panel)
 		drm_panel_bridge_remove(bridge);
-out_config:
-	drm_mode_config_cleanup(dev);
 finish:
 	return ret;
 }
@@ -343,7 +344,6 @@ static int pl111_amba_remove(struct amba_device *amba_dev)
 	drm_dev_unregister(drm);
 	if (priv->panel)
 		drm_panel_bridge_remove(priv->bridge);
-	drm_mode_config_cleanup(drm);
 	drm_dev_put(drm);
 	of_reserved_mem_device_release(dev);
 
@@ -444,6 +444,7 @@ static const struct amba_id pl111_id_table[] = {
 	},
 	{0, 0},
 };
+MODULE_DEVICE_TABLE(amba, pl111_id_table);
 
 static struct amba_driver pl111_amba_driver __maybe_unused = {
 	.drv = {
diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
index 4f325c410b5d..64f01a4e6767 100644
--- a/drivers/gpu/drm/pl111/pl111_versatile.c
+++ b/drivers/gpu/drm/pl111/pl111_versatile.c
@@ -8,9 +8,9 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/regmap.h>
+#include <linux/vexpress.h>
 
 #include "pl111_versatile.h"
-#include "pl111_vexpress.h"
 #include "pl111_drm.h"
 
 static struct regmap *versatile_syscon_map;
@@ -361,13 +361,110 @@ static const struct pl111_variant_data pl111_vexpress = {
 	.broken_clockdivider = true,
 };
 
+#define VEXPRESS_FPGAMUX_MOTHERBOARD		0x00
+#define VEXPRESS_FPGAMUX_DAUGHTERBOARD_1	0x01
+#define VEXPRESS_FPGAMUX_DAUGHTERBOARD_2	0x02
+
+static int pl111_vexpress_clcd_init(struct device *dev, struct device_node *np,
+				    struct pl111_drm_dev_private *priv)
+{
+	struct platform_device *pdev;
+	struct device_node *root;
+	struct device_node *child;
+	struct device_node *ct_clcd = NULL;
+	struct regmap *map;
+	bool has_coretile_clcd = false;
+	bool has_coretile_hdlcd = false;
+	bool mux_motherboard = true;
+	u32 val;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_VEXPRESS_CONFIG))
+		return -ENODEV;
+
+	/*
+	 * Check if we have a CLCD or HDLCD on the core tile by checking if a
+	 * CLCD or HDLCD is available in the root of the device tree.
+	 */
+	root = of_find_node_by_path("/");
+	if (!root)
+		return -EINVAL;
+
+	for_each_available_child_of_node(root, child) {
+		if (of_device_is_compatible(child, "arm,pl111")) {
+			has_coretile_clcd = true;
+			ct_clcd = child;
+			break;
+		}
+		if (of_device_is_compatible(child, "arm,hdlcd")) {
+			has_coretile_hdlcd = true;
+			of_node_put(child);
+			break;
+		}
+	}
+
+	of_node_put(root);
+
+	/*
+	 * If there is a coretile HDLCD and it has a driver,
+	 * do not mux the CLCD on the motherboard to the DVI.
+	 */
+	if (has_coretile_hdlcd && IS_ENABLED(CONFIG_DRM_HDLCD))
+		mux_motherboard = false;
+
+	/*
+	 * On the Vexpress CA9 we let the CLCD on the coretile
+	 * take precedence, so also in this case do not mux the
+	 * motherboard to the DVI.
+	 */
+	if (has_coretile_clcd)
+		mux_motherboard = false;
+
+	if (mux_motherboard) {
+		dev_info(dev, "DVI muxed to motherboard CLCD\n");
+		val = VEXPRESS_FPGAMUX_MOTHERBOARD;
+	} else if (ct_clcd == dev->of_node) {
+		dev_info(dev,
+			 "DVI muxed to daughterboard 1 (core tile) CLCD\n");
+		val = VEXPRESS_FPGAMUX_DAUGHTERBOARD_1;
+	} else {
+		dev_info(dev, "core tile graphics present\n");
+		dev_info(dev, "this device will be deactivated\n");
+		return -ENODEV;
+	}
+
+	/* Call into deep Vexpress configuration API */
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		dev_err(dev, "can't find the sysreg device, deferring\n");
+		return -EPROBE_DEFER;
+	}
+
+	map = devm_regmap_init_vexpress_config(&pdev->dev);
+	if (IS_ERR(map)) {
+		platform_device_put(pdev);
+		return PTR_ERR(map);
+	}
+
+	ret = regmap_write(map, 0, val);
+	platform_device_put(pdev);
+	if (ret) {
+		dev_err(dev, "error setting DVI muxmode\n");
+		return -ENODEV;
+	}
+
+	priv->variant = &pl111_vexpress;
+	dev_info(dev, "initializing Versatile Express PL111\n");
+
+	return 0;
+}
+
 int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 {
 	const struct of_device_id *clcd_id;
 	enum versatile_clcd versatile_clcd_type;
 	struct device_node *np;
 	struct regmap *map;
-	int ret;
 
 	np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match,
 					     &clcd_id);
@@ -378,6 +475,15 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 
 	versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
 
+	/* Versatile Express special handling */
+	if (versatile_clcd_type == VEXPRESS_CLCD_V2M) {
+		int ret = pl111_vexpress_clcd_init(dev, np, priv);
+		of_node_put(np);
+		if (ret)
+			dev_err(dev, "Versatile Express init failed - %d", ret);
+		return ret;
+	}
+
 	/*
 	 * On the Integrator, check if we should use the IM-PD1 instead,
 	 * if we find it, it will take precedence. This is on the Integrator/AP
@@ -390,37 +496,8 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 			versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
 	}
 
-	/* Versatile Express special handling */
-	if (versatile_clcd_type == VEXPRESS_CLCD_V2M) {
-		struct platform_device *pdev;
-
-		/* Registers a driver for the muxfpga */
-		ret = vexpress_muxfpga_init();
-		if (ret) {
-			dev_err(dev, "unable to initialize muxfpga driver\n");
-			of_node_put(np);
-			return ret;
-		}
-
-		/* Call into deep Vexpress configuration API */
-		pdev = of_find_device_by_node(np);
-		if (!pdev) {
-			dev_err(dev, "can't find the sysreg device, deferring\n");
-			of_node_put(np);
-			return -EPROBE_DEFER;
-		}
-		map = dev_get_drvdata(&pdev->dev);
-		if (!map) {
-			dev_err(dev, "sysreg has not yet probed\n");
-			platform_device_put(pdev);
-			of_node_put(np);
-			return -EPROBE_DEFER;
-		}
-	} else {
-		map = syscon_node_to_regmap(np);
-	}
+	map = syscon_node_to_regmap(np);
 	of_node_put(np);
-
 	if (IS_ERR(map)) {
 		dev_err(dev, "no Versatile syscon regmap\n");
 		return PTR_ERR(map);
@@ -466,13 +543,6 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 		priv->variant_display_disable = pl111_realview_clcd_disable;
 		dev_info(dev, "set up callbacks for RealView PL111\n");
 		break;
-	case VEXPRESS_CLCD_V2M:
-		priv->variant = &pl111_vexpress;
-		dev_info(dev, "initializing Versatile Express PL111\n");
-		ret = pl111_vexpress_clcd_init(dev, priv, map);
-		if (ret)
-			return ret;
-		break;
 	default:
 		dev_info(dev, "unknown Versatile system controller\n");
 		break;
diff --git a/drivers/gpu/drm/pl111/pl111_vexpress.c b/drivers/gpu/drm/pl111/pl111_vexpress.c
deleted file mode 100644
index 350570fe06b5..000000000000
--- a/drivers/gpu/drm/pl111/pl111_vexpress.c
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Versatile Express PL111 handling
- * Copyright (C) 2018 Linus Walleij
- *
- * This module binds to the "arm,vexpress-muxfpga" device on the
- * Versatile Express configuration bus and sets up which CLCD instance
- * gets muxed out on the DVI bridge.
- */
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/regmap.h>
-#include <linux/vexpress.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include "pl111_drm.h"
-#include "pl111_vexpress.h"
-
-#define VEXPRESS_FPGAMUX_MOTHERBOARD		0x00
-#define VEXPRESS_FPGAMUX_DAUGHTERBOARD_1	0x01
-#define VEXPRESS_FPGAMUX_DAUGHTERBOARD_2	0x02
-
-int pl111_vexpress_clcd_init(struct device *dev,
-			     struct pl111_drm_dev_private *priv,
-			     struct regmap *map)
-{
-	struct device_node *root;
-	struct device_node *child;
-	struct device_node *ct_clcd = NULL;
-	bool has_coretile_clcd = false;
-	bool has_coretile_hdlcd = false;
-	bool mux_motherboard = true;
-	u32 val;
-	int ret;
-
-	/*
-	 * Check if we have a CLCD or HDLCD on the core tile by checking if a
-	 * CLCD or HDLCD is available in the root of the device tree.
-	 */
-	root = of_find_node_by_path("/");
-	if (!root)
-		return -EINVAL;
-
-	for_each_available_child_of_node(root, child) {
-		if (of_device_is_compatible(child, "arm,pl111")) {
-			has_coretile_clcd = true;
-			ct_clcd = child;
-			break;
-		}
-		if (of_device_is_compatible(child, "arm,hdlcd")) {
-			has_coretile_hdlcd = true;
-			of_node_put(child);
-			break;
-		}
-	}
-
-	of_node_put(root);
-
-	/*
-	 * If there is a coretile HDLCD and it has a driver,
-	 * do not mux the CLCD on the motherboard to the DVI.
-	 */
-	if (has_coretile_hdlcd && IS_ENABLED(CONFIG_DRM_HDLCD))
-		mux_motherboard = false;
-
-	/*
-	 * On the Vexpress CA9 we let the CLCD on the coretile
-	 * take precedence, so also in this case do not mux the
-	 * motherboard to the DVI.
-	 */
-	if (has_coretile_clcd)
-		mux_motherboard = false;
-
-	if (mux_motherboard) {
-		dev_info(dev, "DVI muxed to motherboard CLCD\n");
-		val = VEXPRESS_FPGAMUX_MOTHERBOARD;
-	} else if (ct_clcd == dev->of_node) {
-		dev_info(dev,
-			 "DVI muxed to daughterboard 1 (core tile) CLCD\n");
-		val = VEXPRESS_FPGAMUX_DAUGHTERBOARD_1;
-	} else {
-		dev_info(dev, "core tile graphics present\n");
-		dev_info(dev, "this device will be deactivated\n");
-		return -ENODEV;
-	}
-
-	ret = regmap_write(map, 0, val);
-	if (ret) {
-		dev_err(dev, "error setting DVI muxmode\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-/*
- * This sets up the regmap pointer that will then be retrieved by
- * the detection code in pl111_versatile.c and passed in to the
- * pl111_vexpress_clcd_init() function above.
- */
-static int vexpress_muxfpga_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct regmap *map;
-
-	map = devm_regmap_init_vexpress_config(&pdev->dev);
-	if (IS_ERR(map))
-		return PTR_ERR(map);
-	dev_set_drvdata(dev, map);
-
-	return 0;
-}
-
-static const struct of_device_id vexpress_muxfpga_match[] = {
-	{ .compatible = "arm,vexpress-muxfpga", },
-	{}
-};
-
-static struct platform_driver vexpress_muxfpga_driver = {
-	.driver = {
-		.name = "vexpress-muxfpga",
-		.of_match_table = of_match_ptr(vexpress_muxfpga_match),
-	},
-	.probe = vexpress_muxfpga_probe,
-};
-
-int vexpress_muxfpga_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&vexpress_muxfpga_driver);
-	/* -EBUSY just means this driver is already registered */
-	if (ret == -EBUSY)
-		ret = 0;
-	return ret;
-}
diff --git a/drivers/gpu/drm/pl111/pl111_vexpress.h b/drivers/gpu/drm/pl111/pl111_vexpress.h
deleted file mode 100644
index 5d3681bb4c00..000000000000
--- a/drivers/gpu/drm/pl111/pl111_vexpress.h
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-struct device;
-struct pl111_drm_dev_private;
-struct regmap;
-
-#ifdef CONFIG_ARCH_VEXPRESS
-
-int pl111_vexpress_clcd_init(struct device *dev,
-			     struct pl111_drm_dev_private *priv,
-			     struct regmap *map);
-
-int vexpress_muxfpga_init(void);
-
-#else
-
-static inline int pl111_vexpress_clcd_init(struct device *dev,
-					   struct pl111_drm_dev_private *priv,
-					   struct regmap *map)
-{
-	return -ENODEV;
-}
-
-static inline int vexpress_muxfpga_init(void)
-{
-	return 0;
-}
-
-#endif
diff --git a/drivers/gpu/drm/qxl/qxl_cmd.c b/drivers/gpu/drm/qxl/qxl_cmd.c
index d1086b2a6892..05863b253d68 100644
--- a/drivers/gpu/drm/qxl/qxl_cmd.c
+++ b/drivers/gpu/drm/qxl/qxl_cmd.c
@@ -480,9 +480,10 @@ int qxl_hw_surface_alloc(struct qxl_device *qdev,
 		return ret;
 
 	ret = qxl_release_reserve_list(release, true);
-	if (ret)
+	if (ret) {
+		qxl_release_free(qdev, release);
 		return ret;
-
+	}
 	cmd = (struct qxl_surface_cmd *)qxl_release_map(qdev, release);
 	cmd->type = QXL_SURFACE_CMD_CREATE;
 	cmd->flags = QXL_SURF_FLAG_KEEP_DATA;
@@ -499,8 +500,8 @@ int qxl_hw_surface_alloc(struct qxl_device *qdev,
 	/* no need to add a release to the fence for this surface bo,
 	   since it is only released when we ask to destroy the surface
 	   and it would never signal otherwise */
-	qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
 
 	surf->hw_surf_alloc = true;
 	spin_lock(&qdev->surf_id_idr_lock);
@@ -542,9 +543,8 @@ int qxl_hw_surface_dealloc(struct qxl_device *qdev,
 	cmd->surface_id = id;
 	qxl_release_unmap(qdev, release, &cmd->release_info);
 
-	qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
-
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/qxl/qxl_debugfs.c b/drivers/gpu/drm/qxl/qxl_debugfs.c
index a4f4175bbdbe..524d35b648d8 100644
--- a/drivers/gpu/drm/qxl/qxl_debugfs.c
+++ b/drivers/gpu/drm/qxl/qxl_debugfs.c
@@ -39,7 +39,7 @@ static int
 qxl_debugfs_irq_received(struct seq_file *m, void *data)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
-	struct qxl_device *qdev = node->minor->dev->dev_private;
+	struct qxl_device *qdev = to_qxl(node->minor->dev);
 
 	seq_printf(m, "%d\n", atomic_read(&qdev->irq_received));
 	seq_printf(m, "%d\n", atomic_read(&qdev->irq_received_display));
@@ -53,7 +53,7 @@ static int
 qxl_debugfs_buffers_info(struct seq_file *m, void *data)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
-	struct qxl_device *qdev = node->minor->dev->dev_private;
+	struct qxl_device *qdev = to_qxl(node->minor->dev);
 	struct qxl_bo *bo;
 
 	list_for_each_entry(bo, &qdev->gem.objects, list) {
@@ -79,36 +79,29 @@ static struct drm_info_list qxl_debugfs_list[] = {
 #define QXL_DEBUGFS_ENTRIES ARRAY_SIZE(qxl_debugfs_list)
 #endif
 
-int
+void
 qxl_debugfs_init(struct drm_minor *minor)
 {
 #if defined(CONFIG_DEBUG_FS)
-	int r;
-	struct qxl_device *dev =
-		(struct qxl_device *) minor->dev->dev_private;
+	struct qxl_device *dev = to_qxl(minor->dev);
 
 	drm_debugfs_create_files(qxl_debugfs_list, QXL_DEBUGFS_ENTRIES,
 				 minor->debugfs_root, minor);
 
-	r = qxl_ttm_debugfs_init(dev);
-	if (r) {
-		DRM_ERROR("Failed to init TTM debugfs\n");
-		return r;
-	}
+	qxl_ttm_debugfs_init(dev);
 #endif
-	return 0;
 }
 
-int qxl_debugfs_add_files(struct qxl_device *qdev,
-			  struct drm_info_list *files,
-			  unsigned int nfiles)
+void qxl_debugfs_add_files(struct qxl_device *qdev,
+			   struct drm_info_list *files,
+			   unsigned int nfiles)
 {
 	unsigned int i;
 
 	for (i = 0; i < qdev->debugfs_count; i++) {
 		if (qdev->debugfs[i].files == files) {
 			/* Already registered */
-			return 0;
+			return;
 		}
 	}
 
@@ -116,7 +109,7 @@ int qxl_debugfs_add_files(struct qxl_device *qdev,
 	if (i > QXL_DEBUGFS_MAX_COMPONENTS) {
 		DRM_ERROR("Reached maximum number of debugfs components.\n");
 		DRM_ERROR("Report so we increase QXL_DEBUGFS_MAX_COMPONENTS.\n");
-		return -EINVAL;
+		return;
 	}
 	qdev->debugfs[qdev->debugfs_count].files = files;
 	qdev->debugfs[qdev->debugfs_count].num_files = nfiles;
@@ -126,5 +119,4 @@ int qxl_debugfs_add_files(struct qxl_device *qdev,
 				 qdev->ddev.primary->debugfs_root,
 				 qdev->ddev.primary);
 #endif
-	return 0;
 }
diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c
index 09583a08e141..9d45d5a4278f 100644
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -221,7 +221,7 @@ static int qxl_add_mode(struct drm_connector *connector,
 			bool preferred)
 {
 	struct drm_device *dev = connector->dev;
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_display_mode *mode = NULL;
 	int rc;
 
@@ -242,7 +242,7 @@ static int qxl_add_mode(struct drm_connector *connector,
 static int qxl_add_monitors_config_modes(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct qxl_output *output = drm_connector_to_qxl_output(connector);
 	int h = output->index;
 	struct qxl_head *head;
@@ -310,7 +310,7 @@ static void qxl_crtc_update_monitors_config(struct drm_crtc *crtc,
 					    const char *reason)
 {
 	struct drm_device *dev = crtc->dev;
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct qxl_crtc *qcrtc = to_qxl_crtc(crtc);
 	struct qxl_head head;
 	int oldcount, i = qcrtc->index;
@@ -400,7 +400,7 @@ static int qxl_framebuffer_surface_dirty(struct drm_framebuffer *fb,
 					 unsigned int num_clips)
 {
 	/* TODO: vmwgfx where this was cribbed from had locking. Why? */
-	struct qxl_device *qdev = fb->dev->dev_private;
+	struct qxl_device *qdev = to_qxl(fb->dev);
 	struct drm_clip_rect norect;
 	struct qxl_bo *qobj;
 	bool is_primary;
@@ -462,7 +462,7 @@ static const struct drm_crtc_helper_funcs qxl_crtc_helper_funcs = {
 static int qxl_primary_atomic_check(struct drm_plane *plane,
 				    struct drm_plane_state *state)
 {
-	struct qxl_device *qdev = plane->dev->dev_private;
+	struct qxl_device *qdev = to_qxl(plane->dev);
 	struct qxl_bo *bo;
 
 	if (!state->crtc || !state->fb)
@@ -476,7 +476,7 @@ static int qxl_primary_atomic_check(struct drm_plane *plane,
 static int qxl_primary_apply_cursor(struct drm_plane *plane)
 {
 	struct drm_device *dev = plane->dev;
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_framebuffer *fb = plane->state->fb;
 	struct qxl_crtc *qcrtc = to_qxl_crtc(plane->state->crtc);
 	struct qxl_cursor_cmd *cmd;
@@ -510,8 +510,8 @@ static int qxl_primary_apply_cursor(struct drm_plane *plane)
 	cmd->u.set.visible = 1;
 	qxl_release_unmap(qdev, release, &cmd->release_info);
 
-	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 
 	return ret;
 
@@ -523,7 +523,7 @@ static int qxl_primary_apply_cursor(struct drm_plane *plane)
 static void qxl_primary_atomic_update(struct drm_plane *plane,
 				      struct drm_plane_state *old_state)
 {
-	struct qxl_device *qdev = plane->dev->dev_private;
+	struct qxl_device *qdev = to_qxl(plane->dev);
 	struct qxl_bo *bo = gem_to_qxl_bo(plane->state->fb->obj[0]);
 	struct qxl_bo *primary;
 	struct drm_clip_rect norect = {
@@ -554,7 +554,7 @@ static void qxl_primary_atomic_update(struct drm_plane *plane,
 static void qxl_primary_atomic_disable(struct drm_plane *plane,
 				       struct drm_plane_state *old_state)
 {
-	struct qxl_device *qdev = plane->dev->dev_private;
+	struct qxl_device *qdev = to_qxl(plane->dev);
 
 	if (old_state->fb) {
 		struct qxl_bo *bo = gem_to_qxl_bo(old_state->fb->obj[0]);
@@ -570,7 +570,7 @@ static void qxl_cursor_atomic_update(struct drm_plane *plane,
 				     struct drm_plane_state *old_state)
 {
 	struct drm_device *dev = plane->dev;
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_framebuffer *fb = plane->state->fb;
 	struct qxl_crtc *qcrtc = to_qxl_crtc(plane->state->crtc);
 	struct qxl_release *release;
@@ -652,8 +652,8 @@ static void qxl_cursor_atomic_update(struct drm_plane *plane,
 	cmd->u.position.y = plane->state->crtc_y + fb->hot_y;
 
 	qxl_release_unmap(qdev, release, &cmd->release_info);
-	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 
 	if (old_cursor_bo != NULL)
 		qxl_bo_unpin(old_cursor_bo);
@@ -679,7 +679,7 @@ static void qxl_cursor_atomic_update(struct drm_plane *plane,
 static void qxl_cursor_atomic_disable(struct drm_plane *plane,
 				      struct drm_plane_state *old_state)
 {
-	struct qxl_device *qdev = plane->dev->dev_private;
+	struct qxl_device *qdev = to_qxl(plane->dev);
 	struct qxl_release *release;
 	struct qxl_cursor_cmd *cmd;
 	int ret;
@@ -700,8 +700,8 @@ static void qxl_cursor_atomic_disable(struct drm_plane *plane,
 	cmd->type = QXL_CURSOR_HIDE;
 	qxl_release_unmap(qdev, release, &cmd->release_info);
 
-	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 }
 
 static void qxl_update_dumb_head(struct qxl_device *qdev,
@@ -762,7 +762,7 @@ static void qxl_calc_dumb_shadow(struct qxl_device *qdev,
 static int qxl_plane_prepare_fb(struct drm_plane *plane,
 				struct drm_plane_state *new_state)
 {
-	struct qxl_device *qdev = plane->dev->dev_private;
+	struct qxl_device *qdev = to_qxl(plane->dev);
 	struct drm_gem_object *obj;
 	struct qxl_bo *user_bo;
 	struct qxl_surface surf;
@@ -923,7 +923,7 @@ static int qdev_crtc_init(struct drm_device *dev, int crtc_id)
 {
 	struct qxl_crtc *qxl_crtc;
 	struct drm_plane *primary, *cursor;
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	int r;
 
 	qxl_crtc = kzalloc(sizeof(struct qxl_crtc), GFP_KERNEL);
@@ -965,7 +965,7 @@ static int qdev_crtc_init(struct drm_device *dev, int crtc_id)
 static int qxl_conn_get_modes(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct qxl_output *output = drm_connector_to_qxl_output(connector);
 	unsigned int pwidth = 1024;
 	unsigned int pheight = 768;
@@ -991,7 +991,7 @@ static enum drm_mode_status qxl_conn_mode_valid(struct drm_connector *connector,
 			       struct drm_display_mode *mode)
 {
 	struct drm_device *ddev = connector->dev;
-	struct qxl_device *qdev = ddev->dev_private;
+	struct qxl_device *qdev = to_qxl(ddev);
 
 	if (qxl_check_mode(qdev, mode->hdisplay, mode->vdisplay) != 0)
 		return MODE_BAD;
@@ -1021,7 +1021,7 @@ static enum drm_connector_status qxl_conn_detect(
 	struct qxl_output *output =
 		drm_connector_to_qxl_output(connector);
 	struct drm_device *ddev = connector->dev;
-	struct qxl_device *qdev = ddev->dev_private;
+	struct qxl_device *qdev = to_qxl(ddev);
 	bool connected = false;
 
 	/* The first monitor is always connected */
@@ -1071,7 +1071,7 @@ static int qxl_mode_create_hotplug_mode_update_property(struct qxl_device *qdev)
 
 static int qdev_output_init(struct drm_device *dev, int num_output)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct qxl_output *qxl_output;
 	struct drm_connector *connector;
 	struct drm_encoder *encoder;
diff --git a/drivers/gpu/drm/qxl/qxl_draw.c b/drivers/gpu/drm/qxl/qxl_draw.c
index 5bebf1ea1c5d..3599db096973 100644
--- a/drivers/gpu/drm/qxl/qxl_draw.c
+++ b/drivers/gpu/drm/qxl/qxl_draw.c
@@ -209,9 +209,10 @@ void qxl_draw_dirty_fb(struct qxl_device *qdev,
 		goto out_release_backoff;
 
 	rects = drawable_set_clipping(qdev, num_clips, clips_bo);
-	if (!rects)
+	if (!rects) {
+		ret = -EINVAL;
 		goto out_release_backoff;
-
+	}
 	drawable = (struct qxl_drawable *)qxl_release_map(qdev, release);
 
 	drawable->clip.type = SPICE_CLIP_TYPE_RECTS;
@@ -242,8 +243,8 @@ void qxl_draw_dirty_fb(struct qxl_device *qdev,
 	}
 	qxl_bo_kunmap(clips_bo);
 
-	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 
 out_release_backoff:
 	if (ret)
diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c
index 4fda3f9b29f4..13872b882775 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.c
+++ b/drivers/gpu/drm/qxl/qxl_drv.c
@@ -81,13 +81,16 @@ qxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -EINVAL; /* TODO: ENODEV ? */
 	}
 
-	qdev = kzalloc(sizeof(struct qxl_device), GFP_KERNEL);
-	if (!qdev)
+	qdev = devm_drm_dev_alloc(&pdev->dev, &qxl_driver,
+				  struct qxl_device, ddev);
+	if (IS_ERR(qdev)) {
+		pr_err("Unable to init drm dev");
 		return -ENOMEM;
+	}
 
 	ret = pci_enable_device(pdev);
 	if (ret)
-		goto free_dev;
+		return ret;
 
 	ret = drm_fb_helper_remove_conflicting_pci_framebuffers(pdev, "qxl");
 	if (ret)
@@ -101,7 +104,7 @@ qxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	ret = qxl_device_init(qdev, &qxl_driver, pdev);
+	ret = qxl_device_init(qdev, pdev);
 	if (ret)
 		goto put_vga;
 
@@ -128,14 +131,13 @@ qxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		vga_put(pdev, VGA_RSRC_LEGACY_IO);
 disable_pci:
 	pci_disable_device(pdev);
-free_dev:
-	kfree(qdev);
+
 	return ret;
 }
 
 static void qxl_drm_release(struct drm_device *dev)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 
 	/*
 	 * TODO: qxl_device_fini() call should be in qxl_pci_remove(),
@@ -144,8 +146,6 @@ static void qxl_drm_release(struct drm_device *dev)
 	 */
 	qxl_modeset_fini(qdev);
 	qxl_device_fini(qdev);
-	dev->dev_private = NULL;
-	kfree(qdev);
 }
 
 static void
@@ -157,7 +157,6 @@ qxl_pci_remove(struct pci_dev *pdev)
 	drm_atomic_helper_shutdown(dev);
 	if (is_vga(pdev))
 		vga_put(pdev, VGA_RSRC_LEGACY_IO);
-	drm_dev_put(dev);
 }
 
 DEFINE_DRM_GEM_FOPS(qxl_fops);
@@ -165,7 +164,7 @@ DEFINE_DRM_GEM_FOPS(qxl_fops);
 static int qxl_drm_freeze(struct drm_device *dev)
 {
 	struct pci_dev *pdev = dev->pdev;
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	int ret;
 
 	ret = drm_mode_config_helper_suspend(dev);
@@ -187,7 +186,7 @@ static int qxl_drm_freeze(struct drm_device *dev)
 
 static int qxl_drm_resume(struct drm_device *dev, bool thaw)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 
 	qdev->ram_header->int_mask = QXL_INTERRUPT_MASK;
 	if (!thaw) {
@@ -246,7 +245,7 @@ static int qxl_pm_restore(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct drm_device *drm_dev = pci_get_drvdata(pdev);
-	struct qxl_device *qdev = drm_dev->dev_private;
+	struct qxl_device *qdev = to_qxl(drm_dev);
 
 	qxl_io_reset(qdev);
 	return qxl_drm_resume(drm_dev, false);
diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h
index 27e45a2d6b52..31e35f787df2 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.h
+++ b/drivers/gpu/drm/qxl/qxl_drv.h
@@ -190,13 +190,8 @@ struct qxl_debugfs {
 	unsigned int num_files;
 };
 
-int qxl_debugfs_add_files(struct qxl_device *rdev,
-			     struct drm_info_list *files,
-			     unsigned int nfiles);
 int qxl_debugfs_fence_init(struct qxl_device *rdev);
 
-struct qxl_device;
-
 struct qxl_device {
 	struct drm_device ddev;
 
@@ -276,11 +271,12 @@ struct qxl_device {
 	int monitors_config_height;
 };
 
+#define to_qxl(dev) container_of(dev, struct qxl_device, ddev)
+
 extern const struct drm_ioctl_desc qxl_ioctls[];
 extern int qxl_max_ioctl;
 
-int qxl_device_init(struct qxl_device *qdev, struct drm_driver *drv,
-		    struct pci_dev *pdev);
+int qxl_device_init(struct qxl_device *qdev, struct pci_dev *pdev);
 void qxl_device_fini(struct qxl_device *qdev);
 
 int qxl_modeset_init(struct qxl_device *qdev);
@@ -442,8 +438,8 @@ int qxl_garbage_collect(struct qxl_device *qdev);
 
 /* debugfs */
 
-int qxl_debugfs_init(struct drm_minor *minor);
-int qxl_ttm_debugfs_init(struct qxl_device *qdev);
+void qxl_debugfs_init(struct drm_minor *minor);
+void qxl_ttm_debugfs_init(struct qxl_device *qdev);
 
 /* qxl_prime.c */
 int qxl_gem_prime_pin(struct drm_gem_object *obj);
@@ -461,9 +457,9 @@ int qxl_gem_prime_mmap(struct drm_gem_object *obj,
 int qxl_irq_init(struct qxl_device *qdev);
 irqreturn_t qxl_irq_handler(int irq, void *arg);
 
-int qxl_debugfs_add_files(struct qxl_device *qdev,
-			  struct drm_info_list *files,
-			  unsigned int nfiles);
+void qxl_debugfs_add_files(struct qxl_device *qdev,
+			   struct drm_info_list *files,
+			   unsigned int nfiles);
 
 int qxl_surface_id_alloc(struct qxl_device *qdev,
 			 struct qxl_bo *surf);
diff --git a/drivers/gpu/drm/qxl/qxl_dumb.c b/drivers/gpu/drm/qxl/qxl_dumb.c
index 272d19b677d8..24e903383aa1 100644
--- a/drivers/gpu/drm/qxl/qxl_dumb.c
+++ b/drivers/gpu/drm/qxl/qxl_dumb.c
@@ -32,7 +32,7 @@ int qxl_mode_dumb_create(struct drm_file *file_priv,
 			    struct drm_device *dev,
 			    struct drm_mode_create_dumb *args)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct qxl_bo *qobj;
 	uint32_t handle;
 	int r;
diff --git a/drivers/gpu/drm/qxl/qxl_gem.c b/drivers/gpu/drm/qxl/qxl_gem.c
index 69f37db1027a..5ff6fa9b799c 100644
--- a/drivers/gpu/drm/qxl/qxl_gem.c
+++ b/drivers/gpu/drm/qxl/qxl_gem.c
@@ -34,7 +34,7 @@ void qxl_gem_object_free(struct drm_gem_object *gobj)
 	struct qxl_device *qdev;
 	struct ttm_buffer_object *tbo;
 
-	qdev = (struct qxl_device *)gobj->dev->dev_private;
+	qdev = to_qxl(gobj->dev);
 
 	qxl_surface_evict(qdev, qobj, false);
 
diff --git a/drivers/gpu/drm/qxl/qxl_image.c b/drivers/gpu/drm/qxl/qxl_image.c
index 43688ecdd8a0..60ab7151b84d 100644
--- a/drivers/gpu/drm/qxl/qxl_image.c
+++ b/drivers/gpu/drm/qxl/qxl_image.c
@@ -212,7 +212,8 @@ qxl_image_init_helper(struct qxl_device *qdev,
 		break;
 	default:
 		DRM_ERROR("unsupported image bit depth\n");
-		return -EINVAL; /* TODO: cleanup */
+		qxl_bo_kunmap_atomic_page(qdev, image_bo, ptr);
+		return -EINVAL;
 	}
 	image->u.bitmap.flags = QXL_BITMAP_TOP_DOWN;
 	image->u.bitmap.x = width;
diff --git a/drivers/gpu/drm/qxl/qxl_ioctl.c b/drivers/gpu/drm/qxl/qxl_ioctl.c
index 8117a45b3610..13bd1d11c703 100644
--- a/drivers/gpu/drm/qxl/qxl_ioctl.c
+++ b/drivers/gpu/drm/qxl/qxl_ioctl.c
@@ -36,7 +36,7 @@
 static int qxl_alloc_ioctl(struct drm_device *dev, void *data,
 			   struct drm_file *file_priv)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_qxl_alloc *qxl_alloc = data;
 	int ret;
 	struct qxl_bo *qobj;
@@ -64,7 +64,7 @@ static int qxl_alloc_ioctl(struct drm_device *dev, void *data,
 static int qxl_map_ioctl(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_qxl_map *qxl_map = data;
 
 	return qxl_mode_dumb_mmap(file_priv, &qdev->ddev, qxl_map->handle,
@@ -261,11 +261,8 @@ static int qxl_process_single_command(struct qxl_device *qdev,
 			apply_surf_reloc(qdev, &reloc_info[i]);
 	}
 
+	qxl_release_fence_buffer_objects(release);
 	ret = qxl_push_command_ring_release(qdev, release, cmd->type, true);
-	if (ret)
-		qxl_release_backoff_reserve_list(release);
-	else
-		qxl_release_fence_buffer_objects(release);
 
 out_free_bos:
 out_free_release:
@@ -279,7 +276,7 @@ static int qxl_process_single_command(struct qxl_device *qdev,
 static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data,
 				struct drm_file *file_priv)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_qxl_execbuffer *execbuffer = data;
 	struct drm_qxl_command user_cmd;
 	int cmd_num;
@@ -304,7 +301,7 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data,
 static int qxl_update_area_ioctl(struct drm_device *dev, void *data,
 				 struct drm_file *file)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_qxl_update_area *update_area = data;
 	struct qxl_rect area = {.left = update_area->left,
 				.top = update_area->top,
@@ -354,7 +351,7 @@ static int qxl_update_area_ioctl(struct drm_device *dev, void *data,
 static int qxl_getparam_ioctl(struct drm_device *dev, void *data,
 		       struct drm_file *file_priv)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_qxl_getparam *param = data;
 
 	switch (param->param) {
@@ -373,7 +370,7 @@ static int qxl_getparam_ioctl(struct drm_device *dev, void *data,
 static int qxl_clientcap_ioctl(struct drm_device *dev, void *data,
 				  struct drm_file *file_priv)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_qxl_clientcap *param = data;
 	int byte, idx;
 
@@ -394,7 +391,7 @@ static int qxl_clientcap_ioctl(struct drm_device *dev, void *data,
 static int qxl_alloc_surf_ioctl(struct drm_device *dev, void *data,
 				struct drm_file *file)
 {
-	struct qxl_device *qdev = dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	struct drm_qxl_alloc_surf *param = data;
 	struct qxl_bo *qobj;
 	int handle;
diff --git a/drivers/gpu/drm/qxl/qxl_irq.c b/drivers/gpu/drm/qxl/qxl_irq.c
index 8435af108632..1ba5a702d763 100644
--- a/drivers/gpu/drm/qxl/qxl_irq.c
+++ b/drivers/gpu/drm/qxl/qxl_irq.c
@@ -32,7 +32,7 @@
 irqreturn_t qxl_irq_handler(int irq, void *arg)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
-	struct qxl_device *qdev = (struct qxl_device *)dev->dev_private;
+	struct qxl_device *qdev = to_qxl(dev);
 	uint32_t pending;
 
 	pending = xchg(&qdev->ram_header->int_pending, 0);
diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c
index 70b20ee4741a..a6d873052cd4 100644
--- a/drivers/gpu/drm/qxl/qxl_kms.c
+++ b/drivers/gpu/drm/qxl/qxl_kms.c
@@ -27,6 +27,7 @@
 #include <linux/pci.h>
 
 #include <drm/drm_drv.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_probe_helper.h>
 
 #include "qxl_drv.h"
@@ -107,20 +108,12 @@ static void qxl_gc_work(struct work_struct *work)
 }
 
 int qxl_device_init(struct qxl_device *qdev,
-		    struct drm_driver *drv,
 		    struct pci_dev *pdev)
 {
 	int r, sb;
 
-	r = drm_dev_init(&qdev->ddev, drv, &pdev->dev);
-	if (r) {
-		pr_err("Unable to init drm dev");
-		goto error;
-	}
-
 	qdev->ddev.pdev = pdev;
 	pci_set_drvdata(pdev, &qdev->ddev);
-	qdev->ddev.dev_private = qdev;
 
 	mutex_init(&qdev->gem.mutex);
 	mutex_init(&qdev->update_area_mutex);
@@ -136,8 +129,7 @@ int qxl_device_init(struct qxl_device *qdev,
 	qdev->vram_mapping = io_mapping_create_wc(qdev->vram_base, pci_resource_len(pdev, 0));
 	if (!qdev->vram_mapping) {
 		pr_err("Unable to create vram_mapping");
-		r = -ENOMEM;
-		goto error;
+		return -ENOMEM;
 	}
 
 	if (pci_resource_len(pdev, 4) > 0) {
@@ -218,7 +210,7 @@ int qxl_device_init(struct qxl_device *qdev,
 				&(qdev->ram_header->cursor_ring_hdr),
 				sizeof(struct qxl_command),
 				QXL_CURSOR_RING_SIZE,
-				qdev->io_base + QXL_IO_NOTIFY_CMD,
+				qdev->io_base + QXL_IO_NOTIFY_CURSOR,
 				false,
 				&qdev->cursor_event);
 
@@ -291,7 +283,6 @@ int qxl_device_init(struct qxl_device *qdev,
 	io_mapping_free(qdev->surface_mapping);
 vram_mapping_free:
 	io_mapping_free(qdev->vram_mapping);
-error:
 	return r;
 }
 
diff --git a/drivers/gpu/drm/qxl/qxl_object.c b/drivers/gpu/drm/qxl/qxl_object.c
index ab72dc3476e9..edc8a9916872 100644
--- a/drivers/gpu/drm/qxl/qxl_object.c
+++ b/drivers/gpu/drm/qxl/qxl_object.c
@@ -33,7 +33,7 @@ static void qxl_ttm_bo_destroy(struct ttm_buffer_object *tbo)
 	struct qxl_device *qdev;
 
 	bo = to_qxl_bo(tbo);
-	qdev = (struct qxl_device *)bo->tbo.base.dev->dev_private;
+	qdev = to_qxl(bo->tbo.base.dev);
 
 	qxl_surface_evict(qdev, bo, false);
 	WARN_ON_ONCE(bo->map_count > 0);
diff --git a/drivers/gpu/drm/qxl/qxl_release.c b/drivers/gpu/drm/qxl/qxl_release.c
index 2feca734c7b1..4fae3e393da1 100644
--- a/drivers/gpu/drm/qxl/qxl_release.c
+++ b/drivers/gpu/drm/qxl/qxl_release.c
@@ -243,7 +243,7 @@ static int qxl_release_validate_bo(struct qxl_bo *bo)
 		return ret;
 
 	/* allocate a surface for reserved + validated buffers */
-	ret = qxl_bo_check_id(bo->tbo.base.dev->dev_private, bo);
+	ret = qxl_bo_check_id(to_qxl(bo->tbo.base.dev), bo);
 	if (ret)
 		return ret;
 	return 0;
diff --git a/drivers/gpu/drm/qxl/qxl_ttm.c b/drivers/gpu/drm/qxl/qxl_ttm.c
index 62a5e424971b..f09a712b1ed2 100644
--- a/drivers/gpu/drm/qxl/qxl_ttm.c
+++ b/drivers/gpu/drm/qxl/qxl_ttm.c
@@ -243,7 +243,7 @@ static void qxl_bo_move_notify(struct ttm_buffer_object *bo,
 	if (!qxl_ttm_bo_is_qxl_bo(bo))
 		return;
 	qbo = to_qxl_bo(bo);
-	qdev = qbo->tbo.base.dev->dev_private;
+	qdev = to_qxl(qbo->tbo.base.dev);
 
 	if (bo->mem.mem_type == TTM_PL_PRIV && qbo->surface_id)
 		qxl_surface_evict(qdev, qbo, new_mem ? true : false);
@@ -322,7 +322,7 @@ static int qxl_mm_dump_table(struct seq_file *m, void *data)
 }
 #endif
 
-int qxl_ttm_debugfs_init(struct qxl_device *qdev)
+void qxl_ttm_debugfs_init(struct qxl_device *qdev)
 {
 #if defined(CONFIG_DEBUG_FS)
 	static struct drm_info_list qxl_mem_types_list[QXL_DEBUGFS_MEM_TYPES];
@@ -343,8 +343,6 @@ int qxl_ttm_debugfs_init(struct qxl_device *qdev)
 			qxl_mem_types_list[i].data = qdev->mman.bdev.man[TTM_PL_PRIV].priv;
 
 	}
-	return qxl_debugfs_add_files(qdev, qxl_mem_types_list, i);
-#else
-	return 0;
+	qxl_debugfs_add_files(qdev, qxl_mem_types_list, i);
 #endif
 }
diff --git a/drivers/gpu/drm/r128/ati_pcigart.c b/drivers/gpu/drm/r128/ati_pcigart.c
index 9b4072f97215..3e76ae5a17ee 100644
--- a/drivers/gpu/drm/r128/ati_pcigart.c
+++ b/drivers/gpu/drm/r128/ati_pcigart.c
@@ -32,9 +32,10 @@
  */
 
 #include <linux/export.h>
+#include <linux/pci.h>
 
 #include <drm/drm_device.h>
-#include <drm/drm_pci.h>
+#include <drm/drm_legacy.h>
 #include <drm/drm_print.h>
 
 #include "ati_pcigart.h"
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index c693b2ca0329..11c97edde54d 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -3,42 +3,13 @@
 # Makefile for the drm device driver.  This driver provides support for the
 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
 
-ccflags-y := -Idrivers/gpu/drm/amd/include
-
 hostprogs := mkregtable
-clean-files := rn50_reg_safe.h r100_reg_safe.h r200_reg_safe.h rv515_reg_safe.h r300_reg_safe.h r420_reg_safe.h rs600_reg_safe.h r600_reg_safe.h evergreen_reg_safe.h cayman_reg_safe.h
+targets := rn50_reg_safe.h r100_reg_safe.h r200_reg_safe.h rv515_reg_safe.h r300_reg_safe.h r420_reg_safe.h rs600_reg_safe.h r600_reg_safe.h evergreen_reg_safe.h cayman_reg_safe.h
 
-quiet_cmd_mkregtable = MKREGTABLE $@
+quiet_cmd_mkregtable = MKREG   $@
       cmd_mkregtable = $(obj)/mkregtable $< > $@
 
-$(obj)/rn50_reg_safe.h: $(src)/reg_srcs/rn50 $(obj)/mkregtable
-	$(call if_changed,mkregtable)
-
-$(obj)/r100_reg_safe.h: $(src)/reg_srcs/r100 $(obj)/mkregtable
-	$(call if_changed,mkregtable)
-
-$(obj)/r200_reg_safe.h: $(src)/reg_srcs/r200 $(obj)/mkregtable
-	$(call if_changed,mkregtable)
-
-$(obj)/rv515_reg_safe.h: $(src)/reg_srcs/rv515 $(obj)/mkregtable
-	$(call if_changed,mkregtable)
-
-$(obj)/r300_reg_safe.h: $(src)/reg_srcs/r300 $(obj)/mkregtable
-	$(call if_changed,mkregtable)
-
-$(obj)/r420_reg_safe.h: $(src)/reg_srcs/r420 $(obj)/mkregtable
-	$(call if_changed,mkregtable)
-
-$(obj)/rs600_reg_safe.h: $(src)/reg_srcs/rs600 $(obj)/mkregtable
-	$(call if_changed,mkregtable)
-
-$(obj)/r600_reg_safe.h: $(src)/reg_srcs/r600 $(obj)/mkregtable
-	$(call if_changed,mkregtable)
-
-$(obj)/evergreen_reg_safe.h: $(src)/reg_srcs/evergreen $(obj)/mkregtable
-	$(call if_changed,mkregtable)
-
-$(obj)/cayman_reg_safe.h: $(src)/reg_srcs/cayman $(obj)/mkregtable
+$(obj)/%_reg_safe.h: $(src)/reg_srcs/% $(obj)/mkregtable FORCE
 	$(call if_changed,mkregtable)
 
 $(obj)/r100.o: $(obj)/r100_reg_safe.h $(obj)/rn50_reg_safe.h
diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c
index a9257bed3484..134aa2b01f90 100644
--- a/drivers/gpu/drm/radeon/ci_dpm.c
+++ b/drivers/gpu/drm/radeon/ci_dpm.c
@@ -65,13 +65,6 @@ static const struct ci_pt_defaults defaults_bonaire_xt =
 	{ 0x17C, 0x172, 0x180, 0x1BC, 0x1B3, 0x1BD, 0x206, 0x200, 0x203, 0x25D, 0x25A, 0x255, 0x2C3, 0x2C5, 0x2B4 }
 };
 
-static const struct ci_pt_defaults defaults_bonaire_pro =
-{
-	1, 0xF, 0xFD, 0x19, 5, 45, 0, 0x65062,
-	{ 0x8C,  0x23F, 0x244, 0xA6,  0x83,  0x85,  0x86,  0x86,  0x83,  0xDB,  0xDB,  0xDA,  0x67,  0x60,  0x5F  },
-	{ 0x187, 0x193, 0x193, 0x1C7, 0x1D1, 0x1D1, 0x210, 0x219, 0x219, 0x266, 0x26C, 0x26C, 0x2C9, 0x2CB, 0x2CB }
-};
-
 static const struct ci_pt_defaults defaults_saturn_xt =
 {
 	1, 0xF, 0xFD, 0x19, 5, 55, 0, 0x70000,
@@ -79,13 +72,6 @@ static const struct ci_pt_defaults defaults_saturn_xt =
 	{ 0x187, 0x187, 0x187, 0x1C7, 0x1C7, 0x1C7, 0x210, 0x210, 0x210, 0x266, 0x266, 0x266, 0x2C9, 0x2C9, 0x2C9 }
 };
 
-static const struct ci_pt_defaults defaults_saturn_pro =
-{
-	1, 0xF, 0xFD, 0x19, 5, 55, 0, 0x30000,
-	{ 0x96,  0x21D, 0x23B, 0xA1,  0x85,  0x87,  0x83,  0x84,  0x81,  0xE6,  0xE6,  0xE6,  0x71,  0x6A,  0x6A  },
-	{ 0x193, 0x19E, 0x19E, 0x1D2, 0x1DC, 0x1DC, 0x21A, 0x223, 0x223, 0x26E, 0x27E, 0x274, 0x2CF, 0x2D2, 0x2D2 }
-};
-
 static const struct ci_pt_config_reg didt_config_ci[] =
 {
 	{ 0x10, 0x000000ff, 0, 0x0, CISLANDS_CONFIGREG_DIDT_IND },
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 848ef68d9086..5d2591725189 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2111,7 +2111,7 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev)
 								    ucOverdriveThermalController];
 			info.addr = power_info->info.ucOverdriveControllerAddress >> 1;
 			strlcpy(info.type, name, sizeof(info.type));
-			i2c_new_device(&rdev->pm.i2c_bus->adapter, &info);
+			i2c_new_client_device(&rdev->pm.i2c_bus->adapter, &info);
 		}
 	}
 	num_modes = power_info->info.ucNumOfPowerModeEntries;
@@ -2351,7 +2351,7 @@ static void radeon_atombios_add_pplib_thermal_controller(struct radeon_device *r
 				const char *name = pp_lib_thermal_controller_names[controller->ucType];
 				info.addr = controller->ucI2cAddress >> 1;
 				strlcpy(info.type, name, sizeof(info.type));
-				i2c_new_device(&rdev->pm.i2c_bus->adapter, &info);
+				i2c_new_client_device(&rdev->pm.i2c_bus->adapter, &info);
 			}
 		} else {
 			DRM_INFO("Unknown thermal controller type %d at 0x%02x %s fan control\n",
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index c3e49c973812..d3c04df7e75d 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -2704,7 +2704,7 @@ void radeon_combios_get_power_modes(struct radeon_device *rdev)
 				const char *name = thermal_controller_names[thermal_controller];
 				info.addr = i2c_addr >> 1;
 				strlcpy(info.type, name, sizeof(info.type));
-				i2c_new_device(&rdev->pm.i2c_bus->adapter, &info);
+				i2c_new_client_device(&rdev->pm.i2c_bus->adapter, &info);
 			}
 		}
 	} else {
@@ -2721,7 +2721,7 @@ void radeon_combios_get_power_modes(struct radeon_device *rdev)
 				const char *name = "f75375";
 				info.addr = 0x28;
 				strlcpy(info.type, name, sizeof(info.type));
-				i2c_new_device(&rdev->pm.i2c_bus->adapter, &info);
+				i2c_new_client_device(&rdev->pm.i2c_bus->adapter, &info);
 				DRM_INFO("Possible %s thermal controller at 0x%02x\n",
 					 name, info.addr);
 			}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 59f8186a2415..bbb0883e8ce6 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -36,6 +36,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/vga_switcheroo.h>
 #include <linux/mmu_notifier.h>
+#include <linux/pci.h>
 
 #include <drm/drm_agpsupport.h>
 #include <drm/drm_crtc_helper.h>
@@ -44,7 +45,6 @@
 #include <drm/drm_file.h>
 #include <drm/drm_gem.h>
 #include <drm/drm_ioctl.h>
-#include <drm/drm_pci.h>
 #include <drm/drm_pciids.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_vblank.h>
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 58176db85952..372962358a18 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -158,7 +158,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	}
 
 	if (radeon_is_px(dev)) {
-		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NEVER_SKIP);
+		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 		pm_runtime_use_autosuspend(dev->dev);
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);
diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index 2cb85dbe728f..a167e1c36d24 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -252,24 +252,6 @@ static const struct si_dte_data dte_data_tahiti =
 	false
 };
 
-static const struct si_dte_data dte_data_tahiti_le =
-{
-	{ 0x1E8480, 0x7A1200, 0x2160EC0, 0x3938700, 0 },
-	{ 0x7D, 0x7D, 0x4E4, 0xB00, 0 },
-	0x5,
-	0xAFC8,
-	0x64,
-	0x32,
-	1,
-	0,
-	0x10,
-	{ 0x78, 0x7C, 0x82, 0x88, 0x8E, 0x94, 0x9A, 0xA0, 0xA6, 0xAC, 0xB0, 0xB4, 0xB8, 0xBC, 0xC0, 0xC4 },
-	{ 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700, 0x3938700 },
-	{ 0x2AF8, 0x2AF8, 0x29BB, 0x27F9, 0x2637, 0x2475, 0x22B3, 0x20F1, 0x1F2F, 0x1D6D, 0x1734, 0x1414, 0x10F4, 0xDD4, 0xAB4, 0x794 },
-	85,
-	true
-};
-
 static const struct si_dte_data dte_data_tahiti_pro =
 {
 	{ 0x1E8480, 0x3D0900, 0x989680, 0x2625A00, 0x0 },
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 654e2dd08146..3e67cf70f040 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -530,7 +530,6 @@ static int rcar_du_remove(struct platform_device *pdev)
 	drm_dev_unregister(ddev);
 
 	drm_kms_helper_poll_fini(ddev);
-	drm_mode_config_cleanup(ddev);
 
 	drm_dev_put(ddev);
 
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index c07c6a88aff0..b0335da0c161 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -13,6 +13,7 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_modeset_helper_vtables.h>
 #include <drm/drm_panel.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
@@ -23,13 +24,6 @@
  * Encoder
  */
 
-static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
-};
-
-static const struct drm_encoder_funcs encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static unsigned int rcar_du_encoder_count_ports(struct device_node *node)
 {
 	struct device_node *ports;
@@ -110,13 +104,11 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 		}
 	}
 
-	ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
-			       DRM_MODE_ENCODER_NONE, NULL);
+	ret = drm_simple_encoder_init(rcdu->ddev, encoder,
+				      DRM_MODE_ENCODER_NONE);
 	if (ret < 0)
 		goto done;
 
-	drm_encoder_helper_add(encoder, &encoder_helper_funcs);
-
 	/*
 	 * Attach the bridge to the encoder. The bridge will create the
 	 * connector.
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index fcfd916227d1..482329102f19 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -712,7 +712,9 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
 	unsigned int i;
 	int ret;
 
-	drm_mode_config_init(dev);
+	ret = drmm_mode_config_init(dev);
+	if (ret)
+		return ret;
 
 	dev->mode_config.min_width = 0;
 	dev->mode_config.min_height = 0;
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index ce98c08aa8b4..ade2327a10e2 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -26,6 +26,7 @@
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "rockchip_drm_drv.h"
 #include "rockchip_drm_vop.h"
@@ -258,10 +259,6 @@ static struct drm_encoder_helper_funcs rockchip_dp_encoder_helper_funcs = {
 	.atomic_check = rockchip_dp_drm_encoder_atomic_check,
 };
 
-static struct drm_encoder_funcs rockchip_dp_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int rockchip_dp_of_probe(struct rockchip_dp_device *dp)
 {
 	struct device *dev = dp->dev;
@@ -309,8 +306,8 @@ static int rockchip_dp_drm_create_encoder(struct rockchip_dp_device *dp)
 							     dev->of_node);
 	DRM_DEBUG_KMS("possible_crtcs = 0x%x\n", encoder->possible_crtcs);
 
-	ret = drm_encoder_init(drm_dev, encoder, &rockchip_dp_encoder_funcs,
-			       DRM_MODE_ENCODER_TMDS, NULL);
+	ret = drm_simple_encoder_init(drm_dev, encoder,
+				      DRM_MODE_ENCODER_TMDS);
 	if (ret) {
 		DRM_ERROR("failed to initialize encoder with drm\n");
 		return ret;
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index eed594bd38d3..c634b95b50f7 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -20,6 +20,7 @@
 #include <drm/drm_edid.h>
 #include <drm/drm_of.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "cdn-dp-core.h"
 #include "cdn-dp-reg.h"
@@ -689,10 +690,6 @@ static const struct drm_encoder_helper_funcs cdn_dp_encoder_helper_funcs = {
 	.atomic_check = cdn_dp_encoder_atomic_check,
 };
 
-static const struct drm_encoder_funcs cdn_dp_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int cdn_dp_parse_dt(struct cdn_dp_device *dp)
 {
 	struct device *dev = dp->dev;
@@ -1030,8 +1027,8 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 							     dev->of_node);
 	DRM_DEBUG_KMS("possible_crtcs = 0x%x\n", encoder->possible_crtcs);
 
-	ret = drm_encoder_init(drm_dev, encoder, &cdn_dp_encoder_funcs,
-			       DRM_MODE_ENCODER_TMDS, NULL);
+	ret = drm_simple_encoder_init(drm_dev, encoder,
+				      DRM_MODE_ENCODER_TMDS);
 	if (ret) {
 		DRM_ERROR("failed to initialize encoder with drm\n");
 		return ret;
@@ -1109,7 +1106,7 @@ static const struct component_ops cdn_dp_component_ops = {
 	.unbind = cdn_dp_unbind,
 };
 
-int cdn_dp_suspend(struct device *dev)
+static int cdn_dp_suspend(struct device *dev)
 {
 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
 	int ret = 0;
@@ -1123,7 +1120,7 @@ int cdn_dp_suspend(struct device *dev)
 	return ret;
 }
 
-int cdn_dp_resume(struct device *dev)
+static int cdn_dp_resume(struct device *dev)
 {
 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
 
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-reg.c b/drivers/gpu/drm/rockchip/cdn-dp-reg.c
index 7361c07cb4a7..9d2163ef4d6e 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-reg.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-reg.c
@@ -601,7 +601,7 @@ static int cdn_dp_get_msa_misc(struct video_info *video,
 	case YCBCR_4_2_0:
 		val[0] = 5;
 		break;
-	};
+	}
 
 	switch (video->color_depth) {
 	case 6:
@@ -619,7 +619,7 @@ static int cdn_dp_get_msa_misc(struct video_info *video,
 	case 16:
 		val[1] = 4;
 		break;
-	};
+	}
 
 	msa_misc = 2 * val[0] + 32 * val[1] +
 		   ((video->color_fmt == Y_ONLY) ? (1 << 14) : 0);
@@ -700,7 +700,7 @@ int cdn_dp_config_video(struct cdn_dp_device *dp)
 	case 16:
 		val = BCS_16;
 		break;
-	};
+	}
 
 	val += video->color_fmt << 8;
 	ret = cdn_dp_reg_write(dp, DP_FRAMER_PXL_REPR, val);
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index 6e1270e45f97..3feff0c45b3f 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -21,6 +21,7 @@
 #include <drm/bridge/dw_mipi_dsi.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_of.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "rockchip_drm_drv.h"
 #include "rockchip_drm_vop.h"
@@ -789,10 +790,6 @@ dw_mipi_dsi_encoder_helper_funcs = {
 	.disable = dw_mipi_dsi_encoder_disable,
 };
 
-static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int rockchip_dsi_drm_create_encoder(struct dw_mipi_dsi_rockchip *dsi,
 					   struct drm_device *drm_dev)
 {
@@ -802,8 +799,7 @@ static int rockchip_dsi_drm_create_encoder(struct dw_mipi_dsi_rockchip *dsi,
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
 							     dsi->dev->of_node);
 
-	ret = drm_encoder_init(drm_dev, encoder, &dw_mipi_dsi_encoder_funcs,
-			       DRM_MODE_ENCODER_DSI, NULL);
+	ret = drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_DSI);
 	if (ret) {
 		DRM_ERROR("Failed to initialize encoder with drm\n");
 		return ret;
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 7f56d8c3491d..121aa8a63a76 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -14,6 +14,7 @@
 #include <drm/drm_edid.h>
 #include <drm/drm_of.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "rockchip_drm_drv.h"
 #include "rockchip_drm_vop.h"
@@ -237,10 +238,6 @@ dw_hdmi_rockchip_mode_valid(struct drm_connector *connector,
 	return (valid) ? MODE_OK : MODE_BAD;
 }
 
-static const struct drm_encoder_funcs dw_hdmi_rockchip_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static void dw_hdmi_rockchip_encoder_disable(struct drm_encoder *encoder)
 {
 }
@@ -546,8 +543,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	}
 
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
-	drm_encoder_init(drm, encoder, &dw_hdmi_rockchip_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
 	platform_set_drvdata(pdev, hdmi);
 
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index e5864e823020..7afdc54eb3ec 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -19,6 +19,7 @@
 #include <drm/drm_edid.h>
 #include <drm/drm_of.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "rockchip_drm_drv.h"
 #include "rockchip_drm_vop.h"
@@ -532,10 +533,6 @@ static struct drm_encoder_helper_funcs inno_hdmi_encoder_helper_funcs = {
 	.atomic_check = inno_hdmi_encoder_atomic_check,
 };
 
-static struct drm_encoder_funcs inno_hdmi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static enum drm_connector_status
 inno_hdmi_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -617,8 +614,7 @@ static int inno_hdmi_register(struct drm_device *drm, struct inno_hdmi *hdmi)
 		return -EPROBE_DEFER;
 
 	drm_encoder_helper_add(encoder, &inno_hdmi_encoder_helper_funcs);
-	drm_encoder_init(drm, encoder, &inno_hdmi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
 	hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
 
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index fe203d38664e..1c546c3a8998 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -6,6 +6,7 @@
 
 #include <drm/drm_of.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include <linux/clk.h>
 #include <linux/mfd/syscon.h>
@@ -451,10 +452,6 @@ struct drm_encoder_helper_funcs rk3066_hdmi_encoder_helper_funcs = {
 	.atomic_check = rk3066_hdmi_encoder_atomic_check,
 };
 
-static const struct drm_encoder_funcs rk3066_hdmi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static enum drm_connector_status
 rk3066_hdmi_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -557,8 +554,7 @@ rk3066_hdmi_register(struct drm_device *drm, struct rk3066_hdmi *hdmi)
 		return -EPROBE_DEFER;
 
 	drm_encoder_helper_add(encoder, &rk3066_hdmi_encoder_helper_funcs);
-	drm_encoder_init(drm, encoder, &rk3066_hdmi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
 	hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
 
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 20ecb1508a22..0f3eb392fe39 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -135,14 +135,16 @@ static int rockchip_drm_bind(struct device *dev)
 	if (ret)
 		goto err_free;
 
-	drm_mode_config_init(drm_dev);
+	ret = drmm_mode_config_init(drm_dev);
+	if (ret)
+		goto err_iommu_cleanup;
 
 	rockchip_drm_mode_config_init(drm_dev);
 
 	/* Try to bind all sub drivers. */
 	ret = component_bind_all(dev, drm_dev);
 	if (ret)
-		goto err_mode_config_cleanup;
+		goto err_iommu_cleanup;
 
 	ret = drm_vblank_init(drm_dev, drm_dev->mode_config.num_crtc);
 	if (ret)
@@ -173,12 +175,9 @@ static int rockchip_drm_bind(struct device *dev)
 	rockchip_drm_fbdev_fini(drm_dev);
 err_unbind_all:
 	component_unbind_all(dev, drm_dev);
-err_mode_config_cleanup:
-	drm_mode_config_cleanup(drm_dev);
+err_iommu_cleanup:
 	rockchip_iommu_cleanup(drm_dev);
 err_free:
-	drm_dev->dev_private = NULL;
-	dev_set_drvdata(dev, NULL);
 	drm_dev_put(drm_dev);
 	return ret;
 }
@@ -194,11 +193,8 @@ static void rockchip_drm_unbind(struct device *dev)
 
 	drm_atomic_helper_shutdown(drm_dev);
 	component_unbind_all(dev, drm_dev);
-	drm_mode_config_cleanup(drm_dev);
 	rockchip_iommu_cleanup(drm_dev);
 
-	drm_dev->dev_private = NULL;
-	dev_set_drvdata(dev, NULL);
 	drm_dev_put(drm_dev);
 }
 
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index c5b06048124e..e33c2dcd0d4b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -30,6 +30,7 @@ struct rockchip_crtc_state {
 	int output_mode;
 	int output_bpc;
 	int output_flags;
+	bool enable_afbc;
 };
 #define to_rockchip_crtc_state(s) \
 		container_of(s, struct rockchip_crtc_state, base)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
index 221e72e71432..9b13c784b347 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
@@ -57,8 +57,49 @@ static const struct drm_mode_config_helper_funcs rockchip_mode_config_helpers =
 	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
 };
 
+static struct drm_framebuffer *
+rockchip_fb_create(struct drm_device *dev, struct drm_file *file,
+		   const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	struct drm_afbc_framebuffer *afbc_fb;
+	const struct drm_format_info *info;
+	int ret;
+
+	info = drm_get_format_info(dev, mode_cmd);
+	if (!info)
+		return ERR_PTR(-ENOMEM);
+
+	afbc_fb = kzalloc(sizeof(*afbc_fb), GFP_KERNEL);
+	if (!afbc_fb)
+		return ERR_PTR(-ENOMEM);
+
+	ret = drm_gem_fb_init_with_funcs(dev, &afbc_fb->base, file, mode_cmd,
+					 &rockchip_drm_fb_funcs);
+	if (ret) {
+		kfree(afbc_fb);
+		return ERR_PTR(ret);
+	}
+
+	if (drm_is_afbc(mode_cmd->modifier[0])) {
+		int ret, i;
+
+		ret = drm_gem_fb_afbc_init(dev, mode_cmd, afbc_fb);
+		if (ret) {
+			struct drm_gem_object **obj = afbc_fb->base.obj;
+
+			for (i = 0; i < info->num_planes; ++i)
+				drm_gem_object_put_unlocked(obj[i]);
+
+			kfree(afbc_fb);
+			return ERR_PTR(ret);
+		}
+	}
+
+	return &afbc_fb->base;
+}
+
 static const struct drm_mode_config_funcs rockchip_drm_mode_config_funcs = {
-	.fb_create = drm_gem_fb_create_with_dirty,
+	.fb_create = rockchip_fb_create,
 	.output_poll_changed = drm_fb_helper_output_poll_changed,
 	.atomic_check = drm_atomic_helper_check,
 	.atomic_commit = drm_atomic_helper_commit,
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index cecb2cc781f5..33463b79a37b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -91,9 +91,22 @@
 #define VOP_WIN_TO_INDEX(vop_win) \
 	((vop_win) - (vop_win)->vop->win)
 
+#define VOP_AFBC_SET(vop, name, v) \
+	do { \
+		if ((vop)->data->afbc) \
+			vop_reg_set((vop), &(vop)->data->afbc->name, \
+				    0, ~0, v, #name); \
+	} while (0)
+
 #define to_vop(x) container_of(x, struct vop, crtc)
 #define to_vop_win(x) container_of(x, struct vop_win, base)
 
+#define AFBC_FMT_RGB565		0x0
+#define AFBC_FMT_U8U8U8U8	0x5
+#define AFBC_FMT_U8U8U8		0x4
+
+#define AFBC_TILE_16x16		BIT(4)
+
 /*
  * The coefficients of the following matrix are all fixed points.
  * The format is S2.10 for the 3x3 part of the matrix, and S9.12 for the offsets.
@@ -274,6 +287,29 @@ static enum vop_data_format vop_convert_format(uint32_t format)
 	}
 }
 
+static int vop_convert_afbc_format(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+		return AFBC_FMT_U8U8U8U8;
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		return AFBC_FMT_U8U8U8;
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		return AFBC_FMT_RGB565;
+	/* either of the below should not be reachable */
+	default:
+		DRM_WARN_ONCE("unsupported AFBC format[%08x]\n", format);
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
 static uint16_t scl_vop_cal_scale(enum scale_mode mode, uint32_t src,
 				  uint32_t dst, bool is_horizontal,
 				  int vsu_mode, int *vskiplines)
@@ -598,6 +634,17 @@ static int vop_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
 			vop_win_disable(vop, vop_win);
 		}
 	}
+
+	if (vop->data->afbc) {
+		struct rockchip_crtc_state *s;
+		/*
+		 * Disable AFBC and forget there was a vop window with AFBC
+		 */
+		VOP_AFBC_SET(vop, enable, 0);
+		s = to_rockchip_crtc_state(crtc->state);
+		s->enable_afbc = false;
+	}
+
 	spin_unlock(&vop->reg_lock);
 
 	vop_cfg_done(vop);
@@ -710,6 +757,26 @@ static void vop_plane_destroy(struct drm_plane *plane)
 	drm_plane_cleanup(plane);
 }
 
+static inline bool rockchip_afbc(u64 modifier)
+{
+	return modifier == ROCKCHIP_AFBC_MOD;
+}
+
+static bool rockchip_mod_supported(struct drm_plane *plane,
+				   u32 format, u64 modifier)
+{
+	if (modifier == DRM_FORMAT_MOD_LINEAR)
+		return true;
+
+	if (!rockchip_afbc(modifier)) {
+		DRM_DEBUG_KMS("Unsupported format modifier 0x%llx\n", modifier);
+
+		return false;
+	}
+
+	return vop_convert_afbc_format(format) >= 0;
+}
+
 static int vop_plane_atomic_check(struct drm_plane *plane,
 			   struct drm_plane_state *state)
 {
@@ -758,6 +825,30 @@ static int vop_plane_atomic_check(struct drm_plane *plane,
 		return -EINVAL;
 	}
 
+	if (rockchip_afbc(fb->modifier)) {
+		struct vop *vop = to_vop(crtc);
+
+		if (!vop->data->afbc) {
+			DRM_ERROR("vop does not support AFBC\n");
+			return -EINVAL;
+		}
+
+		ret = vop_convert_afbc_format(fb->format->format);
+		if (ret < 0)
+			return ret;
+
+		if (state->src.x1 || state->src.y1) {
+			DRM_ERROR("AFBC does not support offset display, xpos=%d, ypos=%d, offset=%d\n", state->src.x1, state->src.y1, fb->offsets[0]);
+			return -EINVAL;
+		}
+
+		if (state->rotation && state->rotation != DRM_MODE_ROTATE_0) {
+			DRM_ERROR("No rotation support in AFBC, rotation=%d\n",
+				  state->rotation);
+			return -EINVAL;
+		}
+	}
+
 	return 0;
 }
 
@@ -846,6 +937,16 @@ static void vop_plane_atomic_update(struct drm_plane *plane,
 
 	spin_lock(&vop->reg_lock);
 
+	if (rockchip_afbc(fb->modifier)) {
+		int afbc_format = vop_convert_afbc_format(fb->format->format);
+
+		VOP_AFBC_SET(vop, format, afbc_format | AFBC_TILE_16x16);
+		VOP_AFBC_SET(vop, hreg_block_split, 0);
+		VOP_AFBC_SET(vop, win_sel, VOP_WIN_TO_INDEX(vop_win));
+		VOP_AFBC_SET(vop, hdr_ptr, dma_addr);
+		VOP_AFBC_SET(vop, pic_size, act_info);
+	}
+
 	VOP_WIN_SET(vop, win, format, format);
 	VOP_WIN_SET(vop, win, yrgb_vir, DIV_ROUND_UP(fb->pitches[0], 4));
 	VOP_WIN_SET(vop, win, yrgb_mst, dma_addr);
@@ -1001,6 +1102,7 @@ static const struct drm_plane_funcs vop_plane_funcs = {
 	.reset = drm_atomic_helper_plane_reset,
 	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+	.format_mod_supported = rockchip_mod_supported,
 };
 
 static int vop_crtc_enable_vblank(struct drm_crtc *crtc)
@@ -1310,6 +1412,10 @@ static int vop_crtc_atomic_check(struct drm_crtc *crtc,
 				 struct drm_crtc_state *crtc_state)
 {
 	struct vop *vop = to_vop(crtc);
+	struct drm_plane *plane;
+	struct drm_plane_state *plane_state;
+	struct rockchip_crtc_state *s;
+	int afbc_planes = 0;
 
 	if (vop->lut_regs && crtc_state->color_mgmt_changed &&
 	    crtc_state->gamma_lut) {
@@ -1323,6 +1429,27 @@ static int vop_crtc_atomic_check(struct drm_crtc *crtc,
 		}
 	}
 
+	drm_atomic_crtc_state_for_each_plane(plane, crtc_state) {
+		plane_state =
+			drm_atomic_get_plane_state(crtc_state->state, plane);
+		if (IS_ERR(plane_state)) {
+			DRM_DEBUG_KMS("Cannot get plane state for plane %s\n",
+				      plane->name);
+			return PTR_ERR(plane_state);
+		}
+
+		if (drm_is_afbc(plane_state->fb->modifier))
+			++afbc_planes;
+	}
+
+	if (afbc_planes > 1) {
+		DRM_DEBUG_KMS("Invalid number of AFBC planes; got %d, expected at most 1\n", afbc_planes);
+		return -EINVAL;
+	}
+
+	s = to_rockchip_crtc_state(crtc_state);
+	s->enable_afbc = afbc_planes > 0;
+
 	return 0;
 }
 
@@ -1333,6 +1460,7 @@ static void vop_crtc_atomic_flush(struct drm_crtc *crtc,
 	struct drm_plane_state *old_plane_state, *new_plane_state;
 	struct vop *vop = to_vop(crtc);
 	struct drm_plane *plane;
+	struct rockchip_crtc_state *s;
 	int i;
 
 	if (WARN_ON(!vop->is_enabled))
@@ -1340,6 +1468,9 @@ static void vop_crtc_atomic_flush(struct drm_crtc *crtc,
 
 	spin_lock(&vop->reg_lock);
 
+	/* Enable AFBC if there is some AFBC window, disable otherwise. */
+	s = to_rockchip_crtc_state(crtc->state);
+	VOP_AFBC_SET(vop, enable, s->enable_afbc);
 	vop_cfg_done(vop);
 
 	spin_unlock(&vop->reg_lock);
@@ -1634,7 +1765,8 @@ static int vop_create_crtc(struct vop *vop)
 					       0, &vop_plane_funcs,
 					       win_data->phy->data_formats,
 					       win_data->phy->nformats,
-					       NULL, win_data->type, NULL);
+					       win_data->phy->format_modifiers,
+					       win_data->type, NULL);
 		if (ret) {
 			DRM_DEV_ERROR(vop->dev, "failed to init plane %d\n",
 				      ret);
@@ -1678,7 +1810,8 @@ static int vop_create_crtc(struct vop *vop)
 					       &vop_plane_funcs,
 					       win_data->phy->data_formats,
 					       win_data->phy->nformats,
-					       NULL, win_data->type, NULL);
+					       win_data->phy->format_modifiers,
+					       win_data->type, NULL);
 		if (ret) {
 			DRM_DEV_ERROR(vop->dev, "failed to init overlay %d\n",
 				      ret);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
index cc672620d6e0..d03bdb531ef2 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
@@ -17,6 +17,11 @@
 
 #define NUM_YUV2YUV_COEFFICIENTS 12
 
+#define ROCKCHIP_AFBC_MOD \
+	DRM_FORMAT_MOD_ARM_AFBC( \
+		AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | AFBC_FORMAT_MOD_SPARSE \
+	)
+
 enum vop_data_format {
 	VOP_FMT_ARGB8888 = 0,
 	VOP_FMT_RGB888,
@@ -34,6 +39,16 @@ struct vop_reg {
 	bool relaxed;
 };
 
+struct vop_afbc {
+	struct vop_reg enable;
+	struct vop_reg win_sel;
+	struct vop_reg format;
+	struct vop_reg hreg_block_split;
+	struct vop_reg pic_size;
+	struct vop_reg hdr_ptr;
+	struct vop_reg rstn;
+};
+
 struct vop_modeset {
 	struct vop_reg htotal_pw;
 	struct vop_reg hact_st_end;
@@ -134,6 +149,7 @@ struct vop_win_phy {
 	const struct vop_scl_regs *scl;
 	const uint32_t *data_formats;
 	uint32_t nformats;
+	const uint64_t *format_modifiers;
 
 	struct vop_reg enable;
 	struct vop_reg gate;
@@ -173,6 +189,7 @@ struct vop_data {
 	const struct vop_misc *misc;
 	const struct vop_modeset *modeset;
 	const struct vop_output *output;
+	const struct vop_afbc *afbc;
 	const struct vop_win_yuv2yuv_data *win_yuv2yuv;
 	const struct vop_win_data *win;
 	unsigned int win_size;
diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
index 449a62908d21..63f967902c2d 100644
--- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
+++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
@@ -16,13 +16,14 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
+
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
-
 #include <drm/drm_dp_helper.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "rockchip_drm_drv.h"
 #include "rockchip_drm_vop.h"
@@ -435,10 +436,6 @@ struct drm_encoder_helper_funcs px30_lvds_encoder_helper_funcs = {
 	.atomic_check = rockchip_lvds_encoder_atomic_check,
 };
 
-static const struct drm_encoder_funcs rockchip_lvds_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int rk3288_lvds_probe(struct platform_device *pdev,
 			     struct rockchip_lvds *lvds)
 {
@@ -607,8 +604,7 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
 							     dev->of_node);
 
-	ret = drm_encoder_init(drm_dev, encoder, &rockchip_lvds_encoder_funcs,
-			       DRM_MODE_ENCODER_LVDS, NULL);
+	ret = drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_LVDS);
 	if (ret < 0) {
 		DRM_DEV_ERROR(drm_dev->dev,
 			      "failed to initialize encoder: %d\n", ret);
diff --git a/drivers/gpu/drm/rockchip/rockchip_rgb.c b/drivers/gpu/drm/rockchip/rockchip_rgb.c
index 90784781e515..9a771af5d0c9 100644
--- a/drivers/gpu/drm/rockchip/rockchip_rgb.c
+++ b/drivers/gpu/drm/rockchip/rockchip_rgb.c
@@ -14,6 +14,7 @@
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "rockchip_drm_drv.h"
 #include "rockchip_drm_vop.h"
@@ -67,10 +68,6 @@ struct drm_encoder_helper_funcs rockchip_rgb_encoder_helper_funcs = {
 	.atomic_check = rockchip_rgb_encoder_atomic_check,
 };
 
-static const struct drm_encoder_funcs rockchip_rgb_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
 				       struct drm_crtc *crtc,
 				       struct drm_device *drm_dev)
@@ -126,8 +123,7 @@ struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
 	encoder = &rgb->encoder;
 	encoder->possible_crtcs = drm_crtc_mask(crtc);
 
-	ret = drm_encoder_init(drm_dev, encoder, &rockchip_rgb_encoder_funcs,
-			       DRM_MODE_ENCODER_NONE, NULL);
+	ret = drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_NONE);
 	if (ret < 0) {
 		DRM_DEV_ERROR(drm_dev->dev,
 			      "failed to initialize encoder: %d\n", ret);
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
index 7a9d979c8d5d..2413deded22c 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -50,6 +50,17 @@ static const uint32_t formats_win_full[] = {
 	DRM_FORMAT_NV24,
 };
 
+static const uint64_t format_modifiers_win_full[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID,
+};
+
+static const uint64_t format_modifiers_win_full_afbc[] = {
+	ROCKCHIP_AFBC_MOD,
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID,
+};
+
 static const uint32_t formats_win_lite[] = {
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
@@ -61,6 +72,11 @@ static const uint32_t formats_win_lite[] = {
 	DRM_FORMAT_BGR565,
 };
 
+static const uint64_t format_modifiers_win_lite[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID,
+};
+
 static const struct vop_scl_regs rk3036_win_scl = {
 	.scale_yrgb_x = VOP_REG(RK3036_WIN0_SCL_FACTOR_YRGB, 0xffff, 0x0),
 	.scale_yrgb_y = VOP_REG(RK3036_WIN0_SCL_FACTOR_YRGB, 0xffff, 16),
@@ -72,6 +88,7 @@ static const struct vop_win_phy rk3036_win0_data = {
 	.scl = &rk3036_win_scl,
 	.data_formats = formats_win_full,
 	.nformats = ARRAY_SIZE(formats_win_full),
+	.format_modifiers = format_modifiers_win_full,
 	.enable = VOP_REG(RK3036_SYS_CTRL, 0x1, 0),
 	.format = VOP_REG(RK3036_SYS_CTRL, 0x7, 3),
 	.rb_swap = VOP_REG(RK3036_SYS_CTRL, 0x1, 15),
@@ -87,6 +104,7 @@ static const struct vop_win_phy rk3036_win0_data = {
 static const struct vop_win_phy rk3036_win1_data = {
 	.data_formats = formats_win_lite,
 	.nformats = ARRAY_SIZE(formats_win_lite),
+	.format_modifiers = format_modifiers_win_lite,
 	.enable = VOP_REG(RK3036_SYS_CTRL, 0x1, 1),
 	.format = VOP_REG(RK3036_SYS_CTRL, 0x7, 6),
 	.rb_swap = VOP_REG(RK3036_SYS_CTRL, 0x1, 19),
@@ -153,6 +171,7 @@ static const struct vop_data rk3036_vop = {
 static const struct vop_win_phy rk3126_win1_data = {
 	.data_formats = formats_win_lite,
 	.nformats = ARRAY_SIZE(formats_win_lite),
+	.format_modifiers = format_modifiers_win_lite,
 	.enable = VOP_REG(RK3036_SYS_CTRL, 0x1, 1),
 	.format = VOP_REG(RK3036_SYS_CTRL, 0x7, 6),
 	.rb_swap = VOP_REG(RK3036_SYS_CTRL, 0x1, 19),
@@ -234,6 +253,7 @@ static const struct vop_win_phy px30_win0_data = {
 	.scl = &px30_win_scl,
 	.data_formats = formats_win_full,
 	.nformats = ARRAY_SIZE(formats_win_full),
+	.format_modifiers = format_modifiers_win_full,
 	.enable = VOP_REG(PX30_WIN0_CTRL0, 0x1, 0),
 	.format = VOP_REG(PX30_WIN0_CTRL0, 0x7, 1),
 	.rb_swap = VOP_REG(PX30_WIN0_CTRL0, 0x1, 12),
@@ -249,6 +269,7 @@ static const struct vop_win_phy px30_win0_data = {
 static const struct vop_win_phy px30_win1_data = {
 	.data_formats = formats_win_lite,
 	.nformats = ARRAY_SIZE(formats_win_lite),
+	.format_modifiers = format_modifiers_win_lite,
 	.enable = VOP_REG(PX30_WIN1_CTRL0, 0x1, 0),
 	.format = VOP_REG(PX30_WIN1_CTRL0, 0x7, 4),
 	.rb_swap = VOP_REG(PX30_WIN1_CTRL0, 0x1, 12),
@@ -261,6 +282,7 @@ static const struct vop_win_phy px30_win1_data = {
 static const struct vop_win_phy px30_win2_data = {
 	.data_formats = formats_win_lite,
 	.nformats = ARRAY_SIZE(formats_win_lite),
+	.format_modifiers = format_modifiers_win_lite,
 	.gate = VOP_REG(PX30_WIN2_CTRL0, 0x1, 4),
 	.enable = VOP_REG(PX30_WIN2_CTRL0, 0x1, 0),
 	.format = VOP_REG(PX30_WIN2_CTRL0, 0x3, 5),
@@ -316,6 +338,7 @@ static const struct vop_win_phy rk3066_win0_data = {
 	.scl = &rk3066_win_scl,
 	.data_formats = formats_win_full,
 	.nformats = ARRAY_SIZE(formats_win_full),
+	.format_modifiers = format_modifiers_win_full,
 	.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 0),
 	.format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 4),
 	.rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 19),
@@ -332,6 +355,7 @@ static const struct vop_win_phy rk3066_win1_data = {
 	.scl = &rk3066_win_scl,
 	.data_formats = formats_win_full,
 	.nformats = ARRAY_SIZE(formats_win_full),
+	.format_modifiers = format_modifiers_win_full,
 	.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 1),
 	.format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 7),
 	.rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 23),
@@ -347,6 +371,7 @@ static const struct vop_win_phy rk3066_win1_data = {
 static const struct vop_win_phy rk3066_win2_data = {
 	.data_formats = formats_win_lite,
 	.nformats = ARRAY_SIZE(formats_win_lite),
+	.format_modifiers = format_modifiers_win_lite,
 	.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 2),
 	.format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 10),
 	.rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 27),
@@ -426,6 +451,7 @@ static const struct vop_win_phy rk3188_win0_data = {
 	.scl = &rk3188_win_scl,
 	.data_formats = formats_win_full,
 	.nformats = ARRAY_SIZE(formats_win_full),
+	.format_modifiers = format_modifiers_win_full,
 	.enable = VOP_REG(RK3188_SYS_CTRL, 0x1, 0),
 	.format = VOP_REG(RK3188_SYS_CTRL, 0x7, 3),
 	.rb_swap = VOP_REG(RK3188_SYS_CTRL, 0x1, 15),
@@ -440,6 +466,7 @@ static const struct vop_win_phy rk3188_win0_data = {
 static const struct vop_win_phy rk3188_win1_data = {
 	.data_formats = formats_win_lite,
 	.nformats = ARRAY_SIZE(formats_win_lite),
+	.format_modifiers = format_modifiers_win_lite,
 	.enable = VOP_REG(RK3188_SYS_CTRL, 0x1, 1),
 	.format = VOP_REG(RK3188_SYS_CTRL, 0x7, 6),
 	.rb_swap = VOP_REG(RK3188_SYS_CTRL, 0x1, 19),
@@ -545,6 +572,7 @@ static const struct vop_win_phy rk3288_win01_data = {
 	.scl = &rk3288_win_full_scl,
 	.data_formats = formats_win_full,
 	.nformats = ARRAY_SIZE(formats_win_full),
+	.format_modifiers = format_modifiers_win_full,
 	.enable = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 0),
 	.format = VOP_REG(RK3288_WIN0_CTRL0, 0x7, 1),
 	.rb_swap = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 12),
@@ -563,6 +591,7 @@ static const struct vop_win_phy rk3288_win01_data = {
 static const struct vop_win_phy rk3288_win23_data = {
 	.data_formats = formats_win_lite,
 	.nformats = ARRAY_SIZE(formats_win_lite),
+	.format_modifiers = format_modifiers_win_lite,
 	.enable = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 4),
 	.gate = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 0),
 	.format = VOP_REG(RK3288_WIN2_CTRL0, 0x7, 1),
@@ -677,6 +706,7 @@ static const struct vop_win_phy rk3368_win01_data = {
 	.scl = &rk3288_win_full_scl,
 	.data_formats = formats_win_full,
 	.nformats = ARRAY_SIZE(formats_win_full),
+	.format_modifiers = format_modifiers_win_full,
 	.enable = VOP_REG(RK3368_WIN0_CTRL0, 0x1, 0),
 	.format = VOP_REG(RK3368_WIN0_CTRL0, 0x7, 1),
 	.rb_swap = VOP_REG(RK3368_WIN0_CTRL0, 0x1, 12),
@@ -697,6 +727,7 @@ static const struct vop_win_phy rk3368_win01_data = {
 static const struct vop_win_phy rk3368_win23_data = {
 	.data_formats = formats_win_lite,
 	.nformats = ARRAY_SIZE(formats_win_lite),
+	.format_modifiers = format_modifiers_win_lite,
 	.gate = VOP_REG(RK3368_WIN2_CTRL0, 0x1, 0),
 	.enable = VOP_REG(RK3368_WIN2_CTRL0, 0x1, 4),
 	.format = VOP_REG(RK3368_WIN2_CTRL0, 0x3, 5),
@@ -817,6 +848,53 @@ static const struct vop_win_yuv2yuv_data rk3399_vop_big_win_yuv2yuv_data[] = {
 	  .y2r_en = VOP_REG(RK3399_YUV2YUV_WIN, 0x1, 9) },
 	{ .base = 0xC0, .phy = &rk3399_yuv2yuv_win23_data },
 	{ .base = 0x120, .phy = &rk3399_yuv2yuv_win23_data },
+
+};
+
+static const struct vop_win_phy rk3399_win01_data = {
+	.scl = &rk3288_win_full_scl,
+	.data_formats = formats_win_full,
+	.nformats = ARRAY_SIZE(formats_win_full),
+	.format_modifiers = format_modifiers_win_full_afbc,
+	.enable = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 0),
+	.format = VOP_REG(RK3288_WIN0_CTRL0, 0x7, 1),
+	.rb_swap = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 12),
+	.y_mir_en = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 22),
+	.act_info = VOP_REG(RK3288_WIN0_ACT_INFO, 0x1fff1fff, 0),
+	.dsp_info = VOP_REG(RK3288_WIN0_DSP_INFO, 0x0fff0fff, 0),
+	.dsp_st = VOP_REG(RK3288_WIN0_DSP_ST, 0x1fff1fff, 0),
+	.yrgb_mst = VOP_REG(RK3288_WIN0_YRGB_MST, 0xffffffff, 0),
+	.uv_mst = VOP_REG(RK3288_WIN0_CBR_MST, 0xffffffff, 0),
+	.yrgb_vir = VOP_REG(RK3288_WIN0_VIR, 0x3fff, 0),
+	.uv_vir = VOP_REG(RK3288_WIN0_VIR, 0x3fff, 16),
+	.src_alpha_ctl = VOP_REG(RK3288_WIN0_SRC_ALPHA_CTRL, 0xff, 0),
+	.dst_alpha_ctl = VOP_REG(RK3288_WIN0_DST_ALPHA_CTRL, 0xff, 0),
+};
+
+/*
+ * rk3399 vop big windows register layout is same as rk3288, but we
+ * have a separate rk3399 win data array here so that we can advertise
+ * AFBC on the primary plane.
+ */
+static const struct vop_win_data rk3399_vop_win_data[] = {
+	{ .base = 0x00, .phy = &rk3399_win01_data,
+	  .type = DRM_PLANE_TYPE_PRIMARY },
+	{ .base = 0x40, .phy = &rk3288_win01_data,
+	  .type = DRM_PLANE_TYPE_OVERLAY },
+	{ .base = 0x00, .phy = &rk3288_win23_data,
+	  .type = DRM_PLANE_TYPE_OVERLAY },
+	{ .base = 0x50, .phy = &rk3288_win23_data,
+	  .type = DRM_PLANE_TYPE_CURSOR },
+};
+
+static const struct vop_afbc rk3399_vop_afbc = {
+	.rstn = VOP_REG(RK3399_AFBCD0_CTRL, 0x1, 3),
+	.enable = VOP_REG(RK3399_AFBCD0_CTRL, 0x1, 0),
+	.win_sel = VOP_REG(RK3399_AFBCD0_CTRL, 0x3, 1),
+	.format = VOP_REG(RK3399_AFBCD0_CTRL, 0x1f, 16),
+	.hreg_block_split = VOP_REG(RK3399_AFBCD0_CTRL, 0x1, 21),
+	.hdr_ptr = VOP_REG(RK3399_AFBCD0_HDR_PTR, 0xffffffff, 0),
+	.pic_size = VOP_REG(RK3399_AFBCD0_PIC_SIZE, 0xffffffff, 0),
 };
 
 static const struct vop_data rk3399_vop_big = {
@@ -826,9 +904,10 @@ static const struct vop_data rk3399_vop_big = {
 	.common = &rk3288_common,
 	.modeset = &rk3288_modeset,
 	.output = &rk3399_output,
+	.afbc = &rk3399_vop_afbc,
 	.misc = &rk3368_misc,
-	.win = rk3368_vop_win_data,
-	.win_size = ARRAY_SIZE(rk3368_vop_win_data),
+	.win = rk3399_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3399_vop_win_data),
 	.win_yuv2yuv = rk3399_vop_big_win_yuv2yuv_data,
 };
 
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c
index 75a752d59ef1..03556dbfcafb 100644
--- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c
+++ b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c
@@ -17,6 +17,7 @@
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_plane_helper.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 #include <drm/drm_vblank.h>
 
 #include "shmob_drm_backlight.h"
@@ -558,15 +559,6 @@ static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
 	.mode_set = shmob_drm_encoder_mode_set,
 };
 
-static void shmob_drm_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs encoder_funcs = {
-	.destroy = shmob_drm_encoder_destroy,
-};
-
 int shmob_drm_encoder_create(struct shmob_drm_device *sdev)
 {
 	struct drm_encoder *encoder = &sdev->encoder.encoder;
@@ -576,8 +568,8 @@ int shmob_drm_encoder_create(struct shmob_drm_device *sdev)
 
 	encoder->possible_crtcs = 1;
 
-	ret = drm_encoder_init(sdev->ddev, encoder, &encoder_funcs,
-			       DRM_MODE_ENCODER_LVDS, NULL);
+	ret = drm_simple_encoder_init(sdev->ddev, encoder,
+				      DRM_MODE_ENCODER_LVDS);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/shmobile/shmob_drm_drv.c
index b8c0930959c7..ae9d6b8d3ca8 100644
--- a/drivers/gpu/drm/shmobile/shmob_drm_drv.c
+++ b/drivers/gpu/drm/shmobile/shmob_drm_drv.c
@@ -192,7 +192,6 @@ static int shmob_drm_remove(struct platform_device *pdev)
 
 	drm_dev_unregister(ddev);
 	drm_kms_helper_poll_fini(ddev);
-	drm_mode_config_cleanup(ddev);
 	drm_irq_uninstall(ddev);
 	drm_dev_put(ddev);
 
@@ -288,7 +287,6 @@ static int shmob_drm_probe(struct platform_device *pdev)
 	drm_irq_uninstall(ddev);
 err_modeset_cleanup:
 	drm_kms_helper_poll_fini(ddev);
-	drm_mode_config_cleanup(ddev);
 err_free_drm_dev:
 	drm_dev_put(ddev);
 
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.c b/drivers/gpu/drm/shmobile/shmob_drm_kms.c
index c51197b6fd85..7a866d6ce6bb 100644
--- a/drivers/gpu/drm/shmobile/shmob_drm_kms.c
+++ b/drivers/gpu/drm/shmobile/shmob_drm_kms.c
@@ -126,7 +126,11 @@ static const struct drm_mode_config_funcs shmob_drm_mode_config_funcs = {
 
 int shmob_drm_modeset_init(struct shmob_drm_device *sdev)
 {
-	drm_mode_config_init(sdev->ddev);
+	int ret;
+
+	ret = drmm_mode_config_init(sdev->ddev);
+	if (ret)
+		return ret;
 
 	shmob_drm_crtc_create(sdev);
 	shmob_drm_encoder_create(sdev);
diff --git a/drivers/gpu/drm/sti/sti_compositor.c b/drivers/gpu/drm/sti/sti_compositor.c
index c7652584255d..319962a2c17b 100644
--- a/drivers/gpu/drm/sti/sti_compositor.c
+++ b/drivers/gpu/drm/sti/sti_compositor.c
@@ -42,8 +42,8 @@ static const struct sti_compositor_data stih407_compositor_data = {
 	},
 };
 
-int sti_compositor_debugfs_init(struct sti_compositor *compo,
-				struct drm_minor *minor)
+void sti_compositor_debugfs_init(struct sti_compositor *compo,
+				 struct drm_minor *minor)
 {
 	unsigned int i;
 
@@ -54,8 +54,6 @@ int sti_compositor_debugfs_init(struct sti_compositor *compo,
 	for (i = 0; i < STI_MAX_MIXER; i++)
 		if (compo->mixer[i])
 			sti_mixer_debugfs_init(compo->mixer[i], minor);
-
-	return 0;
 }
 
 static int sti_compositor_bind(struct device *dev,
diff --git a/drivers/gpu/drm/sti/sti_compositor.h b/drivers/gpu/drm/sti/sti_compositor.h
index ac4bb3834810..25bb01bdd013 100644
--- a/drivers/gpu/drm/sti/sti_compositor.h
+++ b/drivers/gpu/drm/sti/sti_compositor.h
@@ -79,7 +79,7 @@ struct sti_compositor {
 	struct notifier_block vtg_vblank_nb[STI_MAX_MIXER];
 };
 
-int sti_compositor_debugfs_init(struct sti_compositor *compo,
-				struct drm_minor *minor);
+void sti_compositor_debugfs_init(struct sti_compositor *compo,
+				 struct drm_minor *minor);
 
 #endif
diff --git a/drivers/gpu/drm/sti/sti_crtc.c b/drivers/gpu/drm/sti/sti_crtc.c
index 49e6cb8f5836..6f37c104c46f 100644
--- a/drivers/gpu/drm/sti/sti_crtc.c
+++ b/drivers/gpu/drm/sti/sti_crtc.c
@@ -319,7 +319,7 @@ static int sti_crtc_late_register(struct drm_crtc *crtc)
 	struct sti_compositor *compo = dev_get_drvdata(mixer->dev);
 
 	if (drm_crtc_index(crtc) == 0)
-		return sti_compositor_debugfs_init(compo, crtc->dev->primary);
+		sti_compositor_debugfs_init(compo, crtc->dev->primary);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/sti/sti_cursor.c b/drivers/gpu/drm/sti/sti_cursor.c
index ea64c1dcaf63..a98057431023 100644
--- a/drivers/gpu/drm/sti/sti_cursor.c
+++ b/drivers/gpu/drm/sti/sti_cursor.c
@@ -131,17 +131,17 @@ static struct drm_info_list cursor_debugfs_files[] = {
 	{ "cursor", cursor_dbg_show, 0, NULL },
 };
 
-static int cursor_debugfs_init(struct sti_cursor *cursor,
-			       struct drm_minor *minor)
+static void cursor_debugfs_init(struct sti_cursor *cursor,
+				struct drm_minor *minor)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(cursor_debugfs_files); i++)
 		cursor_debugfs_files[i].data = cursor;
 
-	return drm_debugfs_create_files(cursor_debugfs_files,
-					ARRAY_SIZE(cursor_debugfs_files),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(cursor_debugfs_files,
+				 ARRAY_SIZE(cursor_debugfs_files),
+				 minor->debugfs_root, minor);
 }
 
 static void sti_cursor_argb8888_to_clut8(struct sti_cursor *cursor, u32 *src)
@@ -342,7 +342,9 @@ static int sti_cursor_late_register(struct drm_plane *drm_plane)
 	struct sti_plane *plane = to_sti_plane(drm_plane);
 	struct sti_cursor *cursor = to_sti_cursor(plane);
 
-	return cursor_debugfs_init(cursor, drm_plane->dev->primary);
+	cursor_debugfs_init(cursor, drm_plane->dev->primary);
+
+	return 0;
 }
 
 static const struct drm_plane_funcs sti_cursor_plane_helpers_funcs = {
diff --git a/drivers/gpu/drm/sti/sti_drv.c b/drivers/gpu/drm/sti/sti_drv.c
index 50870d8cbb76..3f9db3e3f397 100644
--- a/drivers/gpu/drm/sti/sti_drv.c
+++ b/drivers/gpu/drm/sti/sti_drv.c
@@ -92,24 +92,16 @@ static struct drm_info_list sti_drm_dbg_list[] = {
 	{"fps_get", sti_drm_fps_dbg_show, 0},
 };
 
-static int sti_drm_dbg_init(struct drm_minor *minor)
+static void sti_drm_dbg_init(struct drm_minor *minor)
 {
-	int ret;
-
-	ret = drm_debugfs_create_files(sti_drm_dbg_list,
-				       ARRAY_SIZE(sti_drm_dbg_list),
-				       minor->debugfs_root, minor);
-	if (ret)
-		goto err;
+	drm_debugfs_create_files(sti_drm_dbg_list,
+				 ARRAY_SIZE(sti_drm_dbg_list),
+				 minor->debugfs_root, minor);
 
 	debugfs_create_file("fps_show", S_IRUGO | S_IWUSR, minor->debugfs_root,
 			    minor->dev, &sti_drm_fps_fops);
 
 	DRM_INFO("%s: debugfs installed\n", DRIVER_NAME);
-	return 0;
-err:
-	DRM_ERROR("%s: cannot install debugfs\n", DRIVER_NAME);
-	return ret;
 }
 
 static const struct drm_mode_config_funcs sti_mode_config_funcs = {
diff --git a/drivers/gpu/drm/sti/sti_dvo.c b/drivers/gpu/drm/sti/sti_dvo.c
index 3d04bfca21a0..de4af7735c46 100644
--- a/drivers/gpu/drm/sti/sti_dvo.c
+++ b/drivers/gpu/drm/sti/sti_dvo.c
@@ -196,16 +196,16 @@ static struct drm_info_list dvo_debugfs_files[] = {
 	{ "dvo", dvo_dbg_show, 0, NULL },
 };
 
-static int dvo_debugfs_init(struct sti_dvo *dvo, struct drm_minor *minor)
+static void dvo_debugfs_init(struct sti_dvo *dvo, struct drm_minor *minor)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(dvo_debugfs_files); i++)
 		dvo_debugfs_files[i].data = dvo;
 
-	return drm_debugfs_create_files(dvo_debugfs_files,
-					ARRAY_SIZE(dvo_debugfs_files),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(dvo_debugfs_files,
+				 ARRAY_SIZE(dvo_debugfs_files),
+				 minor->debugfs_root, minor);
 }
 
 static void sti_dvo_disable(struct drm_bridge *bridge)
@@ -405,10 +405,7 @@ static int sti_dvo_late_register(struct drm_connector *connector)
 		= to_sti_dvo_connector(connector);
 	struct sti_dvo *dvo = dvo_connector->dvo;
 
-	if (dvo_debugfs_init(dvo, dvo->drm_dev->primary)) {
-		DRM_ERROR("DVO debugfs setup failed\n");
-		return -EINVAL;
-	}
+	dvo_debugfs_init(dvo, dvo->drm_dev->primary);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/sti/sti_gdp.c b/drivers/gpu/drm/sti/sti_gdp.c
index 11595c748844..2d5a2b5b78b8 100644
--- a/drivers/gpu/drm/sti/sti_gdp.c
+++ b/drivers/gpu/drm/sti/sti_gdp.c
@@ -343,9 +343,10 @@ static int gdp_debugfs_init(struct sti_gdp *gdp, struct drm_minor *minor)
 	for (i = 0; i < nb_files; i++)
 		gdp_debugfs_files[i].data = gdp;
 
-	return drm_debugfs_create_files(gdp_debugfs_files,
-					nb_files,
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(gdp_debugfs_files,
+				 nb_files,
+				 minor->debugfs_root, minor);
+	return 0;
 }
 
 static int sti_gdp_fourcc2format(int fourcc)
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
index f3f28d79b0e4..a1ec891eaf3a 100644
--- a/drivers/gpu/drm/sti/sti_hda.c
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -367,16 +367,16 @@ static struct drm_info_list hda_debugfs_files[] = {
 	{ "hda", hda_dbg_show, 0, NULL },
 };
 
-static int hda_debugfs_init(struct sti_hda *hda, struct drm_minor *minor)
+static void hda_debugfs_init(struct sti_hda *hda, struct drm_minor *minor)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(hda_debugfs_files); i++)
 		hda_debugfs_files[i].data = hda;
 
-	return drm_debugfs_create_files(hda_debugfs_files,
-					ARRAY_SIZE(hda_debugfs_files),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(hda_debugfs_files,
+				 ARRAY_SIZE(hda_debugfs_files),
+				 minor->debugfs_root, minor);
 }
 
 /**
@@ -643,10 +643,7 @@ static int sti_hda_late_register(struct drm_connector *connector)
 		= to_sti_hda_connector(connector);
 	struct sti_hda *hda = hda_connector->hda;
 
-	if (hda_debugfs_init(hda, hda->drm_dev->primary)) {
-		DRM_ERROR("HDA debugfs setup failed\n");
-		return -EINVAL;
-	}
+	hda_debugfs_init(hda, hda->drm_dev->primary);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index 18eaf786ffa4..5b15c4974e6b 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -727,16 +727,16 @@ static struct drm_info_list hdmi_debugfs_files[] = {
 	{ "hdmi", hdmi_dbg_show, 0, NULL },
 };
 
-static int hdmi_debugfs_init(struct sti_hdmi *hdmi, struct drm_minor *minor)
+static void hdmi_debugfs_init(struct sti_hdmi *hdmi, struct drm_minor *minor)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(hdmi_debugfs_files); i++)
 		hdmi_debugfs_files[i].data = hdmi;
 
-	return drm_debugfs_create_files(hdmi_debugfs_files,
-					ARRAY_SIZE(hdmi_debugfs_files),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(hdmi_debugfs_files,
+				 ARRAY_SIZE(hdmi_debugfs_files),
+				 minor->debugfs_root, minor);
 }
 
 static void sti_hdmi_disable(struct drm_bridge *bridge)
@@ -1113,10 +1113,7 @@ static int sti_hdmi_late_register(struct drm_connector *connector)
 		= to_sti_hdmi_connector(connector);
 	struct sti_hdmi *hdmi = hdmi_connector->hdmi;
 
-	if (hdmi_debugfs_init(hdmi, hdmi->drm_dev->primary)) {
-		DRM_ERROR("HDMI debugfs setup failed\n");
-		return -EINVAL;
-	}
+	hdmi_debugfs_init(hdmi, hdmi->drm_dev->primary);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/sti/sti_hqvdp.c b/drivers/gpu/drm/sti/sti_hqvdp.c
index 1015abe0ce08..5a4e12194a77 100644
--- a/drivers/gpu/drm/sti/sti_hqvdp.c
+++ b/drivers/gpu/drm/sti/sti_hqvdp.c
@@ -639,16 +639,16 @@ static struct drm_info_list hqvdp_debugfs_files[] = {
 	{ "hqvdp", hqvdp_dbg_show, 0, NULL },
 };
 
-static int hqvdp_debugfs_init(struct sti_hqvdp *hqvdp, struct drm_minor *minor)
+static void hqvdp_debugfs_init(struct sti_hqvdp *hqvdp, struct drm_minor *minor)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(hqvdp_debugfs_files); i++)
 		hqvdp_debugfs_files[i].data = hqvdp;
 
-	return drm_debugfs_create_files(hqvdp_debugfs_files,
-					ARRAY_SIZE(hqvdp_debugfs_files),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(hqvdp_debugfs_files,
+				 ARRAY_SIZE(hqvdp_debugfs_files),
+				 minor->debugfs_root, minor);
 }
 
 /**
@@ -1274,7 +1274,9 @@ static int sti_hqvdp_late_register(struct drm_plane *drm_plane)
 	struct sti_plane *plane = to_sti_plane(drm_plane);
 	struct sti_hqvdp *hqvdp = to_sti_hqvdp(plane);
 
-	return hqvdp_debugfs_init(hqvdp, drm_plane->dev->primary);
+	hqvdp_debugfs_init(hqvdp, drm_plane->dev->primary);
+
+	return 0;
 }
 
 static const struct drm_plane_funcs sti_hqvdp_plane_helpers_funcs = {
diff --git a/drivers/gpu/drm/sti/sti_mixer.c b/drivers/gpu/drm/sti/sti_mixer.c
index c3a3e1e5fc8a..7e5f14646625 100644
--- a/drivers/gpu/drm/sti/sti_mixer.c
+++ b/drivers/gpu/drm/sti/sti_mixer.c
@@ -178,7 +178,7 @@ static struct drm_info_list mixer1_debugfs_files[] = {
 	{ "mixer_aux", mixer_dbg_show, 0, NULL },
 };
 
-int sti_mixer_debugfs_init(struct sti_mixer *mixer, struct drm_minor *minor)
+void sti_mixer_debugfs_init(struct sti_mixer *mixer, struct drm_minor *minor)
 {
 	unsigned int i;
 	struct drm_info_list *mixer_debugfs_files;
@@ -194,15 +194,15 @@ int sti_mixer_debugfs_init(struct sti_mixer *mixer, struct drm_minor *minor)
 		nb_files = ARRAY_SIZE(mixer1_debugfs_files);
 		break;
 	default:
-		return -EINVAL;
+		return;
 	}
 
 	for (i = 0; i < nb_files; i++)
 		mixer_debugfs_files[i].data = mixer;
 
-	return drm_debugfs_create_files(mixer_debugfs_files,
-					nb_files,
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(mixer_debugfs_files,
+				 nb_files,
+				 minor->debugfs_root, minor);
 }
 
 void sti_mixer_set_background_status(struct sti_mixer *mixer, bool enable)
diff --git a/drivers/gpu/drm/sti/sti_mixer.h b/drivers/gpu/drm/sti/sti_mixer.h
index d9544246913a..ab06beb7b258 100644
--- a/drivers/gpu/drm/sti/sti_mixer.h
+++ b/drivers/gpu/drm/sti/sti_mixer.h
@@ -58,7 +58,7 @@ int sti_mixer_active_video_area(struct sti_mixer *mixer,
 
 void sti_mixer_set_background_status(struct sti_mixer *mixer, bool enable);
 
-int sti_mixer_debugfs_init(struct sti_mixer *mixer, struct drm_minor *minor);
+void sti_mixer_debugfs_init(struct sti_mixer *mixer, struct drm_minor *minor);
 
 /* depth in Cross-bar control = z order */
 #define GAM_MIXER_NB_DEPTH_LEVEL 6
diff --git a/drivers/gpu/drm/sti/sti_tvout.c b/drivers/gpu/drm/sti/sti_tvout.c
index c36a8da373cb..df3817f0fd30 100644
--- a/drivers/gpu/drm/sti/sti_tvout.c
+++ b/drivers/gpu/drm/sti/sti_tvout.c
@@ -570,16 +570,16 @@ static struct drm_info_list tvout_debugfs_files[] = {
 	{ "tvout", tvout_dbg_show, 0, NULL },
 };
 
-static int tvout_debugfs_init(struct sti_tvout *tvout, struct drm_minor *minor)
+static void tvout_debugfs_init(struct sti_tvout *tvout, struct drm_minor *minor)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(tvout_debugfs_files); i++)
 		tvout_debugfs_files[i].data = tvout;
 
-	return drm_debugfs_create_files(tvout_debugfs_files,
-					ARRAY_SIZE(tvout_debugfs_files),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(tvout_debugfs_files,
+				 ARRAY_SIZE(tvout_debugfs_files),
+				 minor->debugfs_root, minor);
 }
 
 static void sti_tvout_encoder_dpms(struct drm_encoder *encoder, int mode)
@@ -603,14 +603,11 @@ static void sti_tvout_encoder_destroy(struct drm_encoder *encoder)
 static int sti_tvout_late_register(struct drm_encoder *encoder)
 {
 	struct sti_tvout *tvout = to_sti_tvout(encoder);
-	int ret;
 
 	if (tvout->debugfs_registered)
 		return 0;
 
-	ret = tvout_debugfs_init(tvout, encoder->dev->primary);
-	if (ret)
-		return ret;
+	tvout_debugfs_init(tvout, encoder->dev->primary);
 
 	tvout->debugfs_registered = true;
 	return 0;
diff --git a/drivers/gpu/drm/sti/sti_vid.c b/drivers/gpu/drm/sti/sti_vid.c
index 2d4230410464..2d818397918d 100644
--- a/drivers/gpu/drm/sti/sti_vid.c
+++ b/drivers/gpu/drm/sti/sti_vid.c
@@ -124,16 +124,16 @@ static struct drm_info_list vid_debugfs_files[] = {
 	{ "vid", vid_dbg_show, 0, NULL },
 };
 
-int vid_debugfs_init(struct sti_vid *vid, struct drm_minor *minor)
+void vid_debugfs_init(struct sti_vid *vid, struct drm_minor *minor)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vid_debugfs_files); i++)
 		vid_debugfs_files[i].data = vid;
 
-	return drm_debugfs_create_files(vid_debugfs_files,
-					ARRAY_SIZE(vid_debugfs_files),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(vid_debugfs_files,
+				 ARRAY_SIZE(vid_debugfs_files),
+				 minor->debugfs_root, minor);
 }
 
 void sti_vid_commit(struct sti_vid *vid,
diff --git a/drivers/gpu/drm/sti/sti_vid.h b/drivers/gpu/drm/sti/sti_vid.h
index 9dbd78461de1..991849ba50b5 100644
--- a/drivers/gpu/drm/sti/sti_vid.h
+++ b/drivers/gpu/drm/sti/sti_vid.h
@@ -26,6 +26,6 @@ void sti_vid_disable(struct sti_vid *vid);
 struct sti_vid *sti_vid_create(struct device *dev, struct drm_device *drm_dev,
 			       int id, void __iomem *baseaddr);
 
-int vid_debugfs_init(struct sti_vid *vid, struct drm_minor *minor);
+void vid_debugfs_init(struct sti_vid *vid, struct drm_minor *minor);
 
 #endif
diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
index ea9fcbdc68b3..0f85dd86cafa 100644
--- a/drivers/gpu/drm/stm/drv.c
+++ b/drivers/gpu/drm/stm/drv.c
@@ -88,7 +88,9 @@ static int drv_load(struct drm_device *ddev)
 
 	ddev->dev_private = (void *)ldev;
 
-	drm_mode_config_init(ddev);
+	ret = drmm_mode_config_init(ddev);
+	if (ret)
+		return ret;
 
 	/*
 	 * set max width and height as default value.
@@ -103,7 +105,7 @@ static int drv_load(struct drm_device *ddev)
 
 	ret = ltdc_load(ddev);
 	if (ret)
-		goto err;
+		return ret;
 
 	drm_mode_config_reset(ddev);
 	drm_kms_helper_poll_init(ddev);
@@ -111,9 +113,6 @@ static int drv_load(struct drm_device *ddev)
 	platform_set_drvdata(pdev, ddev);
 
 	return 0;
-err:
-	drm_mode_config_cleanup(ddev);
-	return ret;
 }
 
 static void drv_unload(struct drm_device *ddev)
@@ -122,7 +121,6 @@ static void drv_unload(struct drm_device *ddev)
 
 	drm_kms_helper_poll_fini(ddev);
 	ltdc_unload(ddev);
-	drm_mode_config_cleanup(ddev);
 }
 
 static __maybe_unused int drv_suspend(struct device *dev)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index df585fe64f61..f894968d6e45 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -42,8 +42,6 @@
 
 #define MAX_IRQ 4
 
-#define MAX_ENDPOINTS 2
-
 #define HWVER_10200 0x010200
 #define HWVER_10300 0x010300
 #define HWVER_20101 0x020101
@@ -1201,36 +1199,20 @@ int ltdc_load(struct drm_device *ddev)
 	struct ltdc_device *ldev = ddev->dev_private;
 	struct device *dev = ddev->dev;
 	struct device_node *np = dev->of_node;
-	struct drm_bridge *bridge[MAX_ENDPOINTS] = {NULL};
-	struct drm_panel *panel[MAX_ENDPOINTS] = {NULL};
+	struct drm_bridge *bridge;
+	struct drm_panel *panel;
 	struct drm_crtc *crtc;
 	struct reset_control *rstc;
 	struct resource *res;
-	int irq, ret, i, endpoint_not_ready = -ENODEV;
+	int irq, i, nb_endpoints;
+	int ret = -ENODEV;
 
 	DRM_DEBUG_DRIVER("\n");
 
-	/* Get endpoints if any */
-	for (i = 0; i < MAX_ENDPOINTS; i++) {
-		ret = drm_of_find_panel_or_bridge(np, 0, i, &panel[i],
-						  &bridge[i]);
-
-		/*
-		 * If at least one endpoint is -EPROBE_DEFER, defer probing,
-		 * else if at least one endpoint is ready, continue probing.
-		 */
-		if (ret == -EPROBE_DEFER)
-			return ret;
-		else if (!ret)
-			endpoint_not_ready = 0;
-	}
-
-	if (endpoint_not_ready)
-		return endpoint_not_ready;
-
-	rstc = devm_reset_control_get_exclusive(dev, NULL);
-
-	mutex_init(&ldev->err_lock);
+	/* Get number of endpoints */
+	nb_endpoints = of_graph_get_endpoint_count(np);
+	if (!nb_endpoints)
+		return -ENODEV;
 
 	ldev->pixel_clk = devm_clk_get(dev, "lcd");
 	if (IS_ERR(ldev->pixel_clk)) {
@@ -1244,6 +1226,43 @@ int ltdc_load(struct drm_device *ddev)
 		return -ENODEV;
 	}
 
+	/* Get endpoints if any */
+	for (i = 0; i < nb_endpoints; i++) {
+		ret = drm_of_find_panel_or_bridge(np, 0, i, &panel, &bridge);
+
+		/*
+		 * If at least one endpoint is -ENODEV, continue probing,
+		 * else if at least one endpoint returned an error
+		 * (ie -EPROBE_DEFER) then stop probing.
+		 */
+		if (ret == -ENODEV)
+			continue;
+		else if (ret)
+			goto err;
+
+		if (panel) {
+			bridge = drm_panel_bridge_add_typed(panel,
+							    DRM_MODE_CONNECTOR_DPI);
+			if (IS_ERR(bridge)) {
+				DRM_ERROR("panel-bridge endpoint %d\n", i);
+				ret = PTR_ERR(bridge);
+				goto err;
+			}
+		}
+
+		if (bridge) {
+			ret = ltdc_encoder_init(ddev, bridge);
+			if (ret) {
+				DRM_ERROR("init encoder endpoint %d\n", i);
+				goto err;
+			}
+		}
+	}
+
+	rstc = devm_reset_control_get_exclusive(dev, NULL);
+
+	mutex_init(&ldev->err_lock);
+
 	if (!IS_ERR(rstc)) {
 		reset_control_assert(rstc);
 		usleep_range(10, 20);
@@ -1285,27 +1304,7 @@ int ltdc_load(struct drm_device *ddev)
 			DRM_ERROR("Failed to register LTDC interrupt\n");
 			goto err;
 		}
-	}
 
-	/* Add endpoints panels or bridges if any */
-	for (i = 0; i < MAX_ENDPOINTS; i++) {
-		if (panel[i]) {
-			bridge[i] = drm_panel_bridge_add_typed(panel[i],
-							       DRM_MODE_CONNECTOR_DPI);
-			if (IS_ERR(bridge[i])) {
-				DRM_ERROR("panel-bridge endpoint %d\n", i);
-				ret = PTR_ERR(bridge[i]);
-				goto err;
-			}
-		}
-
-		if (bridge[i]) {
-			ret = ltdc_encoder_init(ddev, bridge[i]);
-			if (ret) {
-				DRM_ERROR("init encoder endpoint %d\n", i);
-				goto err;
-			}
-		}
 	}
 
 	crtc = devm_kzalloc(dev, sizeof(*crtc), GFP_KERNEL);
@@ -1340,8 +1339,8 @@ int ltdc_load(struct drm_device *ddev)
 
 	return 0;
 err:
-	for (i = 0; i < MAX_ENDPOINTS; i++)
-		drm_panel_bridge_remove(bridge[i]);
+	for (i = 0; i < nb_endpoints; i++)
+		drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
 
 	clk_disable_unprepare(ldev->pixel_clk);
 
@@ -1350,11 +1349,14 @@ int ltdc_load(struct drm_device *ddev)
 
 void ltdc_unload(struct drm_device *ddev)
 {
-	int i;
+	struct device *dev = ddev->dev;
+	int nb_endpoints, i;
 
 	DRM_DEBUG_DRIVER("\n");
 
-	for (i = 0; i < MAX_ENDPOINTS; i++)
+	nb_endpoints = of_graph_get_endpoint_count(dev->of_node);
+
+	for (i = 0; i < nb_endpoints; i++)
 		drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
 
 	pm_runtime_disable(ddev->dev);
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index 68d4644ac2dc..ce07ddc3e058 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -22,6 +22,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "sun4i_backend.h"
 #include "sun4i_crtc.h"
@@ -204,10 +205,6 @@ static const struct drm_encoder_helper_funcs sun4i_hdmi_helper_funcs = {
 	.mode_valid	= sun4i_hdmi_mode_valid,
 };
 
-static const struct drm_encoder_funcs sun4i_hdmi_funcs = {
-	.destroy	= drm_encoder_cleanup,
-};
-
 static int sun4i_hdmi_get_modes(struct drm_connector *connector)
 {
 	struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
@@ -282,7 +279,7 @@ static const struct drm_connector_funcs sun4i_hdmi_connector_funcs = {
 };
 
 #ifdef CONFIG_DRM_SUN4I_HDMI_CEC
-static bool sun4i_hdmi_cec_pin_read(struct cec_adapter *adap)
+static int sun4i_hdmi_cec_pin_read(struct cec_adapter *adap)
 {
 	struct sun4i_hdmi *hdmi = cec_get_drvdata(adap);
 
@@ -611,11 +608,8 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
 
 	drm_encoder_helper_add(&hdmi->encoder,
 			       &sun4i_hdmi_helper_funcs);
-	ret = drm_encoder_init(drm,
-			       &hdmi->encoder,
-			       &sun4i_hdmi_funcs,
-			       DRM_MODE_ENCODER_TMDS,
-			       NULL);
+	ret = drm_simple_encoder_init(drm, &hdmi->encoder,
+				      DRM_MODE_ENCODER_TMDS);
 	if (ret) {
 		dev_err(dev, "Couldn't initialise the HDMI encoder\n");
 		goto err_put_ddc_i2c;
diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.c b/drivers/gpu/drm/sun4i/sun4i_lvds.c
index 26e5c7ceb8ff..ffda3184aa12 100644
--- a/drivers/gpu/drm/sun4i/sun4i_lvds.c
+++ b/drivers/gpu/drm/sun4i/sun4i_lvds.c
@@ -12,6 +12,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "sun4i_crtc.h"
 #include "sun4i_tcon.h"
@@ -96,10 +97,6 @@ static const struct drm_encoder_helper_funcs sun4i_lvds_enc_helper_funcs = {
 	.enable		= sun4i_lvds_encoder_enable,
 };
 
-static const struct drm_encoder_funcs sun4i_lvds_enc_funcs = {
-	.destroy	= drm_encoder_cleanup,
-};
-
 int sun4i_lvds_init(struct drm_device *drm, struct sun4i_tcon *tcon)
 {
 	struct drm_encoder *encoder;
@@ -121,11 +118,8 @@ int sun4i_lvds_init(struct drm_device *drm, struct sun4i_tcon *tcon)
 
 	drm_encoder_helper_add(&lvds->encoder,
 			       &sun4i_lvds_enc_helper_funcs);
-	ret = drm_encoder_init(drm,
-			       &lvds->encoder,
-			       &sun4i_lvds_enc_funcs,
-			       DRM_MODE_ENCODER_LVDS,
-			       NULL);
+	ret = drm_simple_encoder_init(drm, &lvds->encoder,
+				      DRM_MODE_ENCODER_LVDS);
 	if (ret) {
 		dev_err(drm->dev, "Couldn't initialise the lvds encoder\n");
 		goto err_out;
diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c
index 3b23d5be3cf3..5a7d43939ae6 100644
--- a/drivers/gpu/drm/sun4i/sun4i_rgb.c
+++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c
@@ -14,6 +14,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "sun4i_crtc.h"
 #include "sun4i_tcon.h"
@@ -188,15 +189,6 @@ static struct drm_encoder_helper_funcs sun4i_rgb_enc_helper_funcs = {
 	.mode_valid	= sun4i_rgb_mode_valid,
 };
 
-static void sun4i_rgb_enc_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static struct drm_encoder_funcs sun4i_rgb_enc_funcs = {
-	.destroy	= sun4i_rgb_enc_destroy,
-};
-
 int sun4i_rgb_init(struct drm_device *drm, struct sun4i_tcon *tcon)
 {
 	struct drm_encoder *encoder;
@@ -218,11 +210,8 @@ int sun4i_rgb_init(struct drm_device *drm, struct sun4i_tcon *tcon)
 
 	drm_encoder_helper_add(&rgb->encoder,
 			       &sun4i_rgb_enc_helper_funcs);
-	ret = drm_encoder_init(drm,
-			       &rgb->encoder,
-			       &sun4i_rgb_enc_funcs,
-			       DRM_MODE_ENCODER_NONE,
-			       NULL);
+	ret = drm_simple_encoder_init(drm, &rgb->encoder,
+				      DRM_MODE_ENCODER_NONE);
 	if (ret) {
 		dev_err(drm->dev, "Couldn't initialise the rgb encoder\n");
 		goto err_out;
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 624437b27cdc..359b56e43b83 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -812,10 +812,8 @@ static int sun4i_tcon_init_irq(struct device *dev,
 	int irq, ret;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "Couldn't retrieve the TCON interrupt\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(dev, irq, sun4i_tcon_handler, 0,
 			       dev_name(dev), tcon);
diff --git a/drivers/gpu/drm/sun4i/sun4i_tv.c b/drivers/gpu/drm/sun4i/sun4i_tv.c
index 39c15282e448..63f4428ac3bf 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tv.c
@@ -19,6 +19,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "sun4i_crtc.h"
 #include "sun4i_drv.h"
@@ -473,15 +474,6 @@ static struct drm_encoder_helper_funcs sun4i_tv_helper_funcs = {
 	.mode_set	= sun4i_tv_mode_set,
 };
 
-static void sun4i_tv_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static struct drm_encoder_funcs sun4i_tv_funcs = {
-	.destroy	= sun4i_tv_destroy,
-};
-
 static int sun4i_tv_comp_get_modes(struct drm_connector *connector)
 {
 	int i;
@@ -592,11 +584,8 @@ static int sun4i_tv_bind(struct device *dev, struct device *master,
 
 	drm_encoder_helper_add(&tv->encoder,
 			       &sun4i_tv_helper_funcs);
-	ret = drm_encoder_init(drm,
-			       &tv->encoder,
-			       &sun4i_tv_funcs,
-			       DRM_MODE_ENCODER_TVDAC,
-			       NULL);
+	ret = drm_simple_encoder_init(drm, &tv->encoder,
+				      DRM_MODE_ENCODER_TVDAC);
 	if (ret) {
 		dev_err(dev, "Couldn't initialise the TV encoder\n");
 		goto err_disable_clk;
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 059939789730..f6c67dd87a05 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -24,6 +24,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "sun4i_crtc.h"
 #include "sun4i_tcon.h"
@@ -846,10 +847,6 @@ static const struct drm_encoder_helper_funcs sun6i_dsi_enc_helper_funcs = {
 	.enable		= sun6i_dsi_encoder_enable,
 };
 
-static const struct drm_encoder_funcs sun6i_dsi_enc_funcs = {
-	.destroy	= drm_encoder_cleanup,
-};
-
 static u32 sun6i_dsi_dcs_build_pkt_hdr(struct sun6i_dsi *dsi,
 				       const struct mipi_dsi_msg *msg)
 {
@@ -1062,11 +1059,8 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
 
 	drm_encoder_helper_add(&dsi->encoder,
 			       &sun6i_dsi_enc_helper_funcs);
-	ret = drm_encoder_init(drm,
-			       &dsi->encoder,
-			       &sun6i_dsi_enc_funcs,
-			       DRM_MODE_ENCODER_DSI,
-			       NULL);
+	ret = drm_simple_encoder_init(drm, &dsi->encoder,
+				      DRM_MODE_ENCODER_DSI);
 	if (ret) {
 		dev_err(dsi->dev, "Couldn't initialise the DSI encoder\n");
 		return ret;
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
index e8a317d5ba19..972682bb8000 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
@@ -10,6 +10,7 @@
 
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_of.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "sun8i_dw_hdmi.h"
 #include "sun8i_tcon_top.h"
@@ -29,10 +30,6 @@ sun8i_dw_hdmi_encoder_helper_funcs = {
 	.mode_set = sun8i_dw_hdmi_encoder_mode_set,
 };
 
-static const struct drm_encoder_funcs sun8i_dw_hdmi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static enum drm_mode_status
 sun8i_dw_hdmi_mode_valid_a83t(struct drm_connector *connector,
 			      const struct drm_display_mode *mode)
@@ -220,8 +217,7 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
 	}
 
 	drm_encoder_helper_add(encoder, &sun8i_dw_hdmi_encoder_helper_funcs);
-	drm_encoder_init(drm, encoder, &sun8i_dw_hdmi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
 	sun8i_hdmi_phy_init(hdmi->phy);
 
diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
index 4a64f7ae437a..56cc037fd312 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
@@ -27,314 +27,225 @@
 #include "sun8i_vi_layer.h"
 #include "sunxi_engine.h"
 
+struct de2_fmt_info {
+	u32	drm_fmt;
+	u32	de2_fmt;
+};
+
 static const struct de2_fmt_info de2_formats[] = {
 	{
 		.drm_fmt = DRM_FORMAT_ARGB8888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ARGB8888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_ABGR8888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ABGR8888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_RGBA8888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_RGBA8888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_BGRA8888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_BGRA8888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_XRGB8888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_XRGB8888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_XBGR8888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_XBGR8888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_RGBX8888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_RGBX8888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_BGRX8888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_BGRX8888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_RGB888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_RGB888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_BGR888,
 		.de2_fmt = SUN8I_MIXER_FBFMT_BGR888,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_RGB565,
 		.de2_fmt = SUN8I_MIXER_FBFMT_RGB565,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_BGR565,
 		.de2_fmt = SUN8I_MIXER_FBFMT_BGR565,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_ARGB4444,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ARGB4444,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		/* for DE2 VI layer which ignores alpha */
 		.drm_fmt = DRM_FORMAT_XRGB4444,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ARGB4444,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_ABGR4444,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ABGR4444,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		/* for DE2 VI layer which ignores alpha */
 		.drm_fmt = DRM_FORMAT_XBGR4444,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ABGR4444,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_RGBA4444,
 		.de2_fmt = SUN8I_MIXER_FBFMT_RGBA4444,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		/* for DE2 VI layer which ignores alpha */
 		.drm_fmt = DRM_FORMAT_RGBX4444,
 		.de2_fmt = SUN8I_MIXER_FBFMT_RGBA4444,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_BGRA4444,
 		.de2_fmt = SUN8I_MIXER_FBFMT_BGRA4444,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		/* for DE2 VI layer which ignores alpha */
 		.drm_fmt = DRM_FORMAT_BGRX4444,
 		.de2_fmt = SUN8I_MIXER_FBFMT_BGRA4444,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_ARGB1555,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ARGB1555,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		/* for DE2 VI layer which ignores alpha */
 		.drm_fmt = DRM_FORMAT_XRGB1555,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ARGB1555,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_ABGR1555,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ABGR1555,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		/* for DE2 VI layer which ignores alpha */
 		.drm_fmt = DRM_FORMAT_XBGR1555,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ABGR1555,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_RGBA5551,
 		.de2_fmt = SUN8I_MIXER_FBFMT_RGBA5551,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		/* for DE2 VI layer which ignores alpha */
 		.drm_fmt = DRM_FORMAT_RGBX5551,
 		.de2_fmt = SUN8I_MIXER_FBFMT_RGBA5551,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_BGRA5551,
 		.de2_fmt = SUN8I_MIXER_FBFMT_BGRA5551,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		/* for DE2 VI layer which ignores alpha */
 		.drm_fmt = DRM_FORMAT_BGRX5551,
 		.de2_fmt = SUN8I_MIXER_FBFMT_BGRA5551,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_ARGB2101010,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ARGB2101010,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_ABGR2101010,
 		.de2_fmt = SUN8I_MIXER_FBFMT_ABGR2101010,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_RGBA1010102,
 		.de2_fmt = SUN8I_MIXER_FBFMT_RGBA1010102,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_BGRA1010102,
 		.de2_fmt = SUN8I_MIXER_FBFMT_BGRA1010102,
-		.rgb = true,
-		.csc = SUN8I_CSC_MODE_OFF,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_UYVY,
 		.de2_fmt = SUN8I_MIXER_FBFMT_UYVY,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_VYUY,
 		.de2_fmt = SUN8I_MIXER_FBFMT_VYUY,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_YUYV,
 		.de2_fmt = SUN8I_MIXER_FBFMT_YUYV,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_YVYU,
 		.de2_fmt = SUN8I_MIXER_FBFMT_YVYU,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_NV16,
 		.de2_fmt = SUN8I_MIXER_FBFMT_NV16,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_NV61,
 		.de2_fmt = SUN8I_MIXER_FBFMT_NV61,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_NV12,
 		.de2_fmt = SUN8I_MIXER_FBFMT_NV12,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_NV21,
 		.de2_fmt = SUN8I_MIXER_FBFMT_NV21,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_YUV422,
 		.de2_fmt = SUN8I_MIXER_FBFMT_YUV422,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_YUV420,
 		.de2_fmt = SUN8I_MIXER_FBFMT_YUV420,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_YUV411,
 		.de2_fmt = SUN8I_MIXER_FBFMT_YUV411,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_YVU422,
 		.de2_fmt = SUN8I_MIXER_FBFMT_YUV422,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YVU2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_YVU420,
 		.de2_fmt = SUN8I_MIXER_FBFMT_YUV420,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YVU2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_YVU411,
 		.de2_fmt = SUN8I_MIXER_FBFMT_YUV411,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YVU2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_P010,
 		.de2_fmt = SUN8I_MIXER_FBFMT_P010_YUV,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 	{
 		.drm_fmt = DRM_FORMAT_P210,
 		.de2_fmt = SUN8I_MIXER_FBFMT_P210_YUV,
-		.rgb = false,
-		.csc = SUN8I_CSC_MODE_YUV2RGB,
 	},
 };
 
-const struct de2_fmt_info *sun8i_mixer_format_info(u32 format)
+int sun8i_mixer_drm_format_to_hw(u32 format, u32 *hw_format)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(de2_formats); ++i)
-		if (de2_formats[i].drm_fmt == format)
-			return &de2_formats[i];
+		if (de2_formats[i].drm_fmt == format) {
+			*hw_format = de2_formats[i].de2_fmt;
+			return 0;
+		}
 
-	return NULL;
+	return -EINVAL;
 }
 
 static void sun8i_mixer_commit(struct sunxi_engine *engine)
diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.h b/drivers/gpu/drm/sun4i/sun8i_mixer.h
index 345b28b0a80a..7576b523fdbb 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.h
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.h
@@ -10,7 +10,6 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include "sun8i_csc.h"
 #include "sunxi_engine.h"
 
 #define SUN8I_MIXER_SIZE(w, h)			(((h) - 1) << 16 | ((w) - 1))
@@ -144,13 +143,6 @@
 #define SUN50I_MIXER_CDC0_EN			0xd0000
 #define SUN50I_MIXER_CDC1_EN			0xd8000
 
-struct de2_fmt_info {
-	u32			drm_fmt;
-	u32			de2_fmt;
-	bool			rgb;
-	enum sun8i_csc_mode	csc;
-};
-
 /**
  * struct sun8i_mixer_cfg - mixer HW configuration
  * @vi_num: number of VI channels
@@ -210,5 +202,5 @@ sun8i_channel_base(struct sun8i_mixer *mixer, int channel)
 		return DE2_CH_BASE + channel * DE2_CH_SIZE;
 }
 
-const struct de2_fmt_info *sun8i_mixer_format_info(u32 format);
+int sun8i_mixer_drm_format_to_hw(u32 format, u32 *hw_format);
 #endif /* _SUN8I_MIXER_H_ */
diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
index c87fd842918e..54f937a7d5e7 100644
--- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
@@ -19,8 +19,8 @@
 #include <drm/drm_plane_helper.h>
 #include <drm/drm_probe_helper.h>
 
-#include "sun8i_ui_layer.h"
 #include "sun8i_mixer.h"
+#include "sun8i_ui_layer.h"
 #include "sun8i_ui_scaler.h"
 
 static void sun8i_ui_layer_enable(struct sun8i_mixer *mixer, int channel,
@@ -174,18 +174,20 @@ static int sun8i_ui_layer_update_formats(struct sun8i_mixer *mixer, int channel,
 					 int overlay, struct drm_plane *plane)
 {
 	struct drm_plane_state *state = plane->state;
-	const struct de2_fmt_info *fmt_info;
-	u32 val, ch_base;
+	const struct drm_format_info *fmt;
+	u32 val, ch_base, hw_fmt;
+	int ret;
 
 	ch_base = sun8i_channel_base(mixer, channel);
 
-	fmt_info = sun8i_mixer_format_info(state->fb->format->format);
-	if (!fmt_info || !fmt_info->rgb) {
+	fmt = state->fb->format;
+	ret = sun8i_mixer_drm_format_to_hw(fmt->format, &hw_fmt);
+	if (ret || fmt->is_yuv) {
 		DRM_DEBUG_DRIVER("Invalid format\n");
 		return -EINVAL;
 	}
 
-	val = fmt_info->de2_fmt << SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_OFFSET;
+	val = hw_fmt << SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_OFFSET;
 	regmap_update_bits(mixer->engine.regs,
 			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch_base, overlay),
 			   SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_MASK, val);
diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
index b8398ca18b0f..22c8c5375d0d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
@@ -12,8 +12,9 @@
 #include <drm/drm_plane_helper.h>
 #include <drm/drm_probe_helper.h>
 
-#include "sun8i_vi_layer.h"
+#include "sun8i_csc.h"
 #include "sun8i_mixer.h"
+#include "sun8i_vi_layer.h"
 #include "sun8i_vi_scaler.h"
 
 static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int channel,
@@ -210,28 +211,47 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel,
 	return 0;
 }
 
+static bool sun8i_vi_layer_get_csc_mode(const struct drm_format_info *format)
+{
+	if (!format->is_yuv)
+		return SUN8I_CSC_MODE_OFF;
+
+	switch (format->format) {
+	case DRM_FORMAT_YVU411:
+	case DRM_FORMAT_YVU420:
+	case DRM_FORMAT_YVU422:
+	case DRM_FORMAT_YVU444:
+		return SUN8I_CSC_MODE_YVU2RGB;
+	default:
+		return SUN8I_CSC_MODE_YUV2RGB;
+	}
+}
+
 static int sun8i_vi_layer_update_formats(struct sun8i_mixer *mixer, int channel,
 					 int overlay, struct drm_plane *plane)
 {
 	struct drm_plane_state *state = plane->state;
-	const struct de2_fmt_info *fmt_info;
-	u32 val, ch_base;
+	u32 val, ch_base, csc_mode, hw_fmt;
+	const struct drm_format_info *fmt;
+	int ret;
 
 	ch_base = sun8i_channel_base(mixer, channel);
 
-	fmt_info = sun8i_mixer_format_info(state->fb->format->format);
-	if (!fmt_info) {
+	fmt = state->fb->format;
+	ret = sun8i_mixer_drm_format_to_hw(fmt->format, &hw_fmt);
+	if (ret) {
 		DRM_DEBUG_DRIVER("Invalid format\n");
-		return -EINVAL;
+		return ret;
 	}
 
-	val = fmt_info->de2_fmt << SUN8I_MIXER_CHAN_VI_LAYER_ATTR_FBFMT_OFFSET;
+	val = hw_fmt << SUN8I_MIXER_CHAN_VI_LAYER_ATTR_FBFMT_OFFSET;
 	regmap_update_bits(mixer->engine.regs,
 			   SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base, overlay),
 			   SUN8I_MIXER_CHAN_VI_LAYER_ATTR_FBFMT_MASK, val);
 
-	if (fmt_info->csc != SUN8I_CSC_MODE_OFF) {
-		sun8i_csc_set_ccsc_coefficients(mixer, channel, fmt_info->csc,
+	csc_mode = sun8i_vi_layer_get_csc_mode(fmt);
+	if (csc_mode != SUN8I_CSC_MODE_OFF) {
+		sun8i_csc_set_ccsc_coefficients(mixer, channel, csc_mode,
 						state->color_encoding,
 						state->color_range);
 		sun8i_csc_enable_ccsc(mixer, channel, true);
@@ -239,7 +259,7 @@ static int sun8i_vi_layer_update_formats(struct sun8i_mixer *mixer, int channel,
 		sun8i_csc_enable_ccsc(mixer, channel, false);
 	}
 
-	if (fmt_info->rgb)
+	if (!fmt->is_yuv)
 		val = SUN8I_MIXER_CHAN_VI_LAYER_ATTR_RGB_MODE;
 	else
 		val = 0;
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 1a7b08f35776..83f31c6e891c 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -1496,7 +1496,6 @@ static int tegra_dc_late_register(struct drm_crtc *crtc)
 	struct drm_minor *minor = crtc->dev->primary;
 	struct dentry *root;
 	struct tegra_dc *dc = to_tegra_dc(crtc);
-	int err;
 
 #ifdef CONFIG_DEBUG_FS
 	root = crtc->debugfs_entry;
@@ -1512,17 +1511,9 @@ static int tegra_dc_late_register(struct drm_crtc *crtc)
 	for (i = 0; i < count; i++)
 		dc->debugfs_files[i].data = dc;
 
-	err = drm_debugfs_create_files(dc->debugfs_files, count, root, minor);
-	if (err < 0)
-		goto free;
+	drm_debugfs_create_files(dc->debugfs_files, count, root, minor);
 
 	return 0;
-
-free:
-	kfree(dc->debugfs_files);
-	dc->debugfs_files = NULL;
-
-	return err;
 }
 
 static void tegra_dc_early_unregister(struct drm_crtc *crtc)
diff --git a/drivers/gpu/drm/tegra/dpaux.c b/drivers/gpu/drm/tegra/dpaux.c
index 7dfb50f65067..105fb9cdbb3b 100644
--- a/drivers/gpu/drm/tegra/dpaux.c
+++ b/drivers/gpu/drm/tegra/dpaux.c
@@ -5,12 +5,10 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index bd268028fb3d..211906347f3f 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -839,11 +839,11 @@ static struct drm_info_list tegra_debugfs_list[] = {
 	{ "iova", tegra_debugfs_iova, 0 },
 };
 
-static int tegra_debugfs_init(struct drm_minor *minor)
+static void tegra_debugfs_init(struct drm_minor *minor)
 {
-	return drm_debugfs_create_files(tegra_debugfs_list,
-					ARRAY_SIZE(tegra_debugfs_list),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(tegra_debugfs_list,
+				 ARRAY_SIZE(tegra_debugfs_list),
+				 minor->debugfs_root, minor);
 }
 #endif
 
@@ -1039,6 +1039,7 @@ void tegra_drm_free(struct tegra_drm *tegra, size_t size, void *virt,
 
 static bool host1x_drm_wants_iommu(struct host1x_device *dev)
 {
+	struct host1x *host1x = dev_get_drvdata(dev->dev.parent);
 	struct iommu_domain *domain;
 
 	/*
@@ -1076,7 +1077,7 @@ static bool host1x_drm_wants_iommu(struct host1x_device *dev)
 	 * sufficient and whether or not the host1x is attached to an IOMMU
 	 * doesn't matter.
 	 */
-	if (!domain && dma_get_mask(dev->dev.parent) <= DMA_BIT_MASK(32))
+	if (!domain && host1x_get_dma_mask(host1x) <= DMA_BIT_MASK(32))
 		return true;
 
 	return domain != NULL;
diff --git a/drivers/gpu/drm/tegra/drm.h b/drivers/gpu/drm/tegra/drm.h
index ed99b67deb29..b25443255be6 100644
--- a/drivers/gpu/drm/tegra/drm.h
+++ b/drivers/gpu/drm/tegra/drm.h
@@ -9,7 +9,7 @@
 
 #include <linux/host1x.h>
 #include <linux/iova.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_edid.h>
@@ -152,8 +152,6 @@ enum drm_connector_status
 tegra_output_connector_detect(struct drm_connector *connector, bool force);
 void tegra_output_connector_destroy(struct drm_connector *connector);
 
-void tegra_output_encoder_destroy(struct drm_encoder *encoder);
-
 /* from dpaux.c */
 struct drm_dp_aux *drm_dp_aux_find_by_of_node(struct device_node *np);
 enum drm_connector_status drm_dp_aux_detect(struct drm_dp_aux *aux);
diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 88b9d64c77bf..38beab9ab4f8 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -22,6 +22,7 @@
 #include <drm/drm_file.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_panel.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "dc.h"
 #include "drm.h"
@@ -234,7 +235,6 @@ static int tegra_dsi_late_register(struct drm_connector *connector)
 	struct drm_minor *minor = connector->dev->primary;
 	struct dentry *root = connector->debugfs_entry;
 	struct tegra_dsi *dsi = to_dsi(output);
-	int err;
 
 	dsi->debugfs_files = kmemdup(debugfs_files, sizeof(debugfs_files),
 				     GFP_KERNEL);
@@ -244,17 +244,9 @@ static int tegra_dsi_late_register(struct drm_connector *connector)
 	for (i = 0; i < count; i++)
 		dsi->debugfs_files[i].data = dsi;
 
-	err = drm_debugfs_create_files(dsi->debugfs_files, count, root, minor);
-	if (err < 0)
-		goto free;
+	drm_debugfs_create_files(dsi->debugfs_files, count, root, minor);
 
 	return 0;
-
-free:
-	kfree(dsi->debugfs_files);
-	dsi->debugfs_files = NULL;
-
-	return err;
 }
 
 static void tegra_dsi_early_unregister(struct drm_connector *connector)
@@ -824,10 +816,6 @@ static const struct drm_connector_helper_funcs tegra_dsi_connector_helper_funcs
 	.mode_valid = tegra_dsi_connector_mode_valid,
 };
 
-static const struct drm_encoder_funcs tegra_dsi_encoder_funcs = {
-	.destroy = tegra_output_encoder_destroy,
-};
-
 static void tegra_dsi_unprepare(struct tegra_dsi *dsi)
 {
 	int err;
@@ -1058,9 +1046,8 @@ static int tegra_dsi_init(struct host1x_client *client)
 					 &tegra_dsi_connector_helper_funcs);
 		dsi->output.connector.dpms = DRM_MODE_DPMS_OFF;
 
-		drm_encoder_init(drm, &dsi->output.encoder,
-				 &tegra_dsi_encoder_funcs,
-				 DRM_MODE_ENCODER_DSI, NULL);
+		drm_simple_encoder_init(drm, &dsi->output.encoder,
+					DRM_MODE_ENCODER_DSI);
 		drm_encoder_helper_add(&dsi->output.encoder,
 				       &tegra_dsi_encoder_helper_funcs);
 
diff --git a/drivers/gpu/drm/tegra/fb.c b/drivers/gpu/drm/tegra/fb.c
index b8a328f53862..2b0666ac681b 100644
--- a/drivers/gpu/drm/tegra/fb.c
+++ b/drivers/gpu/drm/tegra/fb.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2012 NVIDIA CORPORATION.  All rights reserved.
  *
  * Based on the KMS/FB CMA helpers
- *   Copyright (C) 2012 Analog Device Inc.
+ *   Copyright (C) 2012 Analog Devices Inc.
  */
 
 #include <linux/console.h>
diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c
index 38252c0f068d..d09a24931c87 100644
--- a/drivers/gpu/drm/tegra/hdmi.c
+++ b/drivers/gpu/drm/tegra/hdmi.c
@@ -7,7 +7,6 @@
 #include <linux/clk.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
 #include <linux/hdmi.h>
 #include <linux/math64.h>
 #include <linux/module.h>
@@ -22,6 +21,7 @@
 #include <drm/drm_file.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "hda.h"
 #include "hdmi.h"
@@ -1064,7 +1064,6 @@ static int tegra_hdmi_late_register(struct drm_connector *connector)
 	struct drm_minor *minor = connector->dev->primary;
 	struct dentry *root = connector->debugfs_entry;
 	struct tegra_hdmi *hdmi = to_hdmi(output);
-	int err;
 
 	hdmi->debugfs_files = kmemdup(debugfs_files, sizeof(debugfs_files),
 				      GFP_KERNEL);
@@ -1074,17 +1073,9 @@ static int tegra_hdmi_late_register(struct drm_connector *connector)
 	for (i = 0; i < count; i++)
 		hdmi->debugfs_files[i].data = hdmi;
 
-	err = drm_debugfs_create_files(hdmi->debugfs_files, count, root, minor);
-	if (err < 0)
-		goto free;
+	drm_debugfs_create_files(hdmi->debugfs_files, count, root, minor);
 
 	return 0;
-
-free:
-	kfree(hdmi->debugfs_files);
-	hdmi->debugfs_files = NULL;
-
-	return err;
 }
 
 static void tegra_hdmi_early_unregister(struct drm_connector *connector)
@@ -1136,10 +1127,6 @@ tegra_hdmi_connector_helper_funcs = {
 	.mode_valid = tegra_hdmi_connector_mode_valid,
 };
 
-static const struct drm_encoder_funcs tegra_hdmi_encoder_funcs = {
-	.destroy = tegra_output_encoder_destroy,
-};
-
 static void tegra_hdmi_encoder_disable(struct drm_encoder *encoder)
 {
 	struct tegra_output *output = encoder_to_output(encoder);
@@ -1445,8 +1432,8 @@ static int tegra_hdmi_init(struct host1x_client *client)
 				 &tegra_hdmi_connector_helper_funcs);
 	hdmi->output.connector.dpms = DRM_MODE_DPMS_OFF;
 
-	drm_encoder_init(drm, &hdmi->output.encoder, &tegra_hdmi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm, &hdmi->output.encoder,
+				DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(&hdmi->output.encoder,
 			       &tegra_hdmi_encoder_helper_funcs);
 
diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c
index a264259b97a2..e36e5e7c2f69 100644
--- a/drivers/gpu/drm/tegra/output.c
+++ b/drivers/gpu/drm/tegra/output.c
@@ -6,6 +6,7 @@
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_panel.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "drm.h"
 #include "dc.h"
@@ -79,11 +80,6 @@ void tegra_output_connector_destroy(struct drm_connector *connector)
 	drm_connector_cleanup(connector);
 }
 
-void tegra_output_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
 static irqreturn_t hpd_irq(int irq, void *data)
 {
 	struct tegra_output *output = data;
diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
index 4be4dfd4a68a..0562a7eb793f 100644
--- a/drivers/gpu/drm/tegra/rgb.c
+++ b/drivers/gpu/drm/tegra/rgb.c
@@ -8,6 +8,7 @@
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_panel.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "drm.h"
 #include "dc.h"
@@ -110,10 +111,6 @@ static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs
 	.mode_valid = tegra_rgb_connector_mode_valid,
 };
 
-static const struct drm_encoder_funcs tegra_rgb_encoder_funcs = {
-	.destroy = tegra_output_encoder_destroy,
-};
-
 static void tegra_rgb_encoder_disable(struct drm_encoder *encoder)
 {
 	struct tegra_output *output = encoder_to_output(encoder);
@@ -281,8 +278,7 @@ int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc)
 				 &tegra_rgb_connector_helper_funcs);
 	output->connector.dpms = DRM_MODE_DPMS_OFF;
 
-	drm_encoder_init(drm, &output->encoder, &tegra_rgb_encoder_funcs,
-			 DRM_MODE_ENCODER_LVDS, NULL);
+	drm_simple_encoder_init(drm, &output->encoder, DRM_MODE_ENCODER_LVDS);
 	drm_encoder_helper_add(&output->encoder,
 			       &tegra_rgb_encoder_helper_funcs);
 
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 81226a4953c1..7cbcf9617f5e 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -6,7 +6,6 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/debugfs.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
@@ -23,6 +22,7 @@
 #include <drm/drm_file.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_scdc_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "dc.h"
 #include "dp.h"
@@ -1687,7 +1687,6 @@ static int tegra_sor_late_register(struct drm_connector *connector)
 	struct drm_minor *minor = connector->dev->primary;
 	struct dentry *root = connector->debugfs_entry;
 	struct tegra_sor *sor = to_sor(output);
-	int err;
 
 	sor->debugfs_files = kmemdup(debugfs_files, sizeof(debugfs_files),
 				     GFP_KERNEL);
@@ -1697,17 +1696,9 @@ static int tegra_sor_late_register(struct drm_connector *connector)
 	for (i = 0; i < count; i++)
 		sor->debugfs_files[i].data = sor;
 
-	err = drm_debugfs_create_files(sor->debugfs_files, count, root, minor);
-	if (err < 0)
-		goto free;
+	drm_debugfs_create_files(sor->debugfs_files, count, root, minor);
 
 	return 0;
-
-free:
-	kfree(sor->debugfs_files);
-	sor->debugfs_files = NULL;
-
-	return err;
 }
 
 static void tegra_sor_early_unregister(struct drm_connector *connector)
@@ -1805,10 +1796,6 @@ static const struct drm_connector_helper_funcs tegra_sor_connector_helper_funcs
 	.mode_valid = tegra_sor_connector_mode_valid,
 };
 
-static const struct drm_encoder_funcs tegra_sor_encoder_funcs = {
-	.destroy = tegra_output_encoder_destroy,
-};
-
 static int
 tegra_sor_encoder_atomic_check(struct drm_encoder *encoder,
 			       struct drm_crtc_state *crtc_state,
@@ -3102,8 +3089,7 @@ static int tegra_sor_init(struct host1x_client *client)
 				 &tegra_sor_connector_helper_funcs);
 	sor->output.connector.dpms = DRM_MODE_DPMS_OFF;
 
-	drm_encoder_init(drm, &sor->output.encoder, &tegra_sor_encoder_funcs,
-			 encoder, NULL);
+	drm_simple_encoder_init(drm, &sor->output.encoder, encoder);
 	drm_encoder_helper_add(&sor->output.encoder, helpers);
 
 	drm_connector_attach_encoder(&sor->output.connector,
diff --git a/drivers/gpu/drm/tidss/tidss_crtc.c b/drivers/gpu/drm/tidss/tidss_crtc.c
index 3221a707e073..89a226912de8 100644
--- a/drivers/gpu/drm/tidss/tidss_crtc.c
+++ b/drivers/gpu/drm/tidss/tidss_crtc.c
@@ -24,7 +24,7 @@
 static void tidss_crtc_finish_page_flip(struct tidss_crtc *tcrtc)
 {
 	struct drm_device *ddev = tcrtc->crtc.dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	struct drm_pending_vblank_event *event;
 	unsigned long flags;
 	bool busy;
@@ -88,7 +88,7 @@ static int tidss_crtc_atomic_check(struct drm_crtc *crtc,
 				   struct drm_crtc_state *state)
 {
 	struct drm_device *ddev = crtc->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	struct dispc_device *dispc = tidss->dispc;
 	struct tidss_crtc *tcrtc = to_tidss_crtc(crtc);
 	u32 hw_videoport = tcrtc->hw_videoport;
@@ -165,7 +165,7 @@ static void tidss_crtc_atomic_flush(struct drm_crtc *crtc,
 {
 	struct tidss_crtc *tcrtc = to_tidss_crtc(crtc);
 	struct drm_device *ddev = crtc->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	unsigned long flags;
 
 	dev_dbg(ddev->dev,
@@ -216,7 +216,7 @@ static void tidss_crtc_atomic_enable(struct drm_crtc *crtc,
 {
 	struct tidss_crtc *tcrtc = to_tidss_crtc(crtc);
 	struct drm_device *ddev = crtc->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
 	unsigned long flags;
 	int r;
@@ -259,7 +259,7 @@ static void tidss_crtc_atomic_disable(struct drm_crtc *crtc,
 {
 	struct tidss_crtc *tcrtc = to_tidss_crtc(crtc);
 	struct drm_device *ddev = crtc->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	unsigned long flags;
 
 	dev_dbg(ddev->dev, "%s, event %p\n", __func__, crtc->state->event);
@@ -295,7 +295,7 @@ enum drm_mode_status tidss_crtc_mode_valid(struct drm_crtc *crtc,
 {
 	struct tidss_crtc *tcrtc = to_tidss_crtc(crtc);
 	struct drm_device *ddev = crtc->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 
 	return dispc_vp_mode_valid(tidss->dispc, tcrtc->hw_videoport, mode);
 }
@@ -314,7 +314,7 @@ static const struct drm_crtc_helper_funcs tidss_crtc_helper_funcs = {
 static int tidss_crtc_enable_vblank(struct drm_crtc *crtc)
 {
 	struct drm_device *ddev = crtc->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 
 	dev_dbg(ddev->dev, "%s\n", __func__);
 
@@ -328,7 +328,7 @@ static int tidss_crtc_enable_vblank(struct drm_crtc *crtc)
 static void tidss_crtc_disable_vblank(struct drm_crtc *crtc)
 {
 	struct drm_device *ddev = crtc->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 
 	dev_dbg(ddev->dev, "%s\n", __func__);
 
diff --git a/drivers/gpu/drm/tidss/tidss_drv.c b/drivers/gpu/drm/tidss/tidss_drv.c
index d95e4be2c7b9..99edc66ebdef 100644
--- a/drivers/gpu/drm/tidss/tidss_drv.c
+++ b/drivers/gpu/drm/tidss/tidss_drv.c
@@ -17,6 +17,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_irq.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_probe_helper.h>
 
 #include "tidss_dispc.h"
@@ -102,15 +103,7 @@ static const struct dev_pm_ops tidss_pm_ops = {
 
 static void tidss_release(struct drm_device *ddev)
 {
-	struct tidss_device *tidss = ddev->dev_private;
-
 	drm_kms_helper_poll_fini(ddev);
-
-	tidss_modeset_cleanup(tidss);
-
-	drm_dev_fini(ddev);
-
-	kfree(tidss);
 }
 
 DEFINE_DRM_GEM_CMA_FOPS(tidss_fops);
@@ -142,26 +135,18 @@ static int tidss_probe(struct platform_device *pdev)
 
 	dev_dbg(dev, "%s\n", __func__);
 
-	/* Can't use devm_* since drm_device's lifetime may exceed dev's */
-	tidss = kzalloc(sizeof(*tidss), GFP_KERNEL);
-	if (!tidss)
-		return -ENOMEM;
+	tidss = devm_drm_dev_alloc(&pdev->dev, &tidss_driver,
+				   struct tidss_device, ddev);
+	if (IS_ERR(tidss))
+		return PTR_ERR(tidss);
 
 	ddev = &tidss->ddev;
 
-	ret = devm_drm_dev_init(&pdev->dev, ddev, &tidss_driver);
-	if (ret) {
-		kfree(ddev);
-		return ret;
-	}
-
 	tidss->dev = dev;
 	tidss->feat = of_device_get_match_data(dev);
 
 	platform_set_drvdata(pdev, tidss);
 
-	ddev->dev_private = tidss;
-
 	ret = dispc_init(tidss);
 	if (ret) {
 		dev_err(dev, "failed to initialize dispc: %d\n", ret);
diff --git a/drivers/gpu/drm/tidss/tidss_drv.h b/drivers/gpu/drm/tidss/tidss_drv.h
index e2aa6436ad18..3b0a3d87b7c4 100644
--- a/drivers/gpu/drm/tidss/tidss_drv.h
+++ b/drivers/gpu/drm/tidss/tidss_drv.h
@@ -29,10 +29,10 @@ struct tidss_device {
 
 	spinlock_t wait_lock;	/* protects the irq masks */
 	dispc_irq_t irq_mask;	/* enabled irqs in addition to wait_list */
-
-	struct drm_atomic_state *saved_state;
 };
 
+#define to_tidss(__dev) container_of(__dev, struct tidss_device, ddev)
+
 int tidss_runtime_get(struct tidss_device *tidss);
 void tidss_runtime_put(struct tidss_device *tidss);
 
diff --git a/drivers/gpu/drm/tidss/tidss_encoder.c b/drivers/gpu/drm/tidss/tidss_encoder.c
index 30bf2a65949c..4c0558286f5e 100644
--- a/drivers/gpu/drm/tidss/tidss_encoder.c
+++ b/drivers/gpu/drm/tidss/tidss_encoder.c
@@ -8,8 +8,9 @@
 
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
-#include <drm/drm_panel.h>
 #include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "tidss_crtc.h"
 #include "tidss_drv.h"
@@ -55,38 +56,25 @@ static int tidss_encoder_atomic_check(struct drm_encoder *encoder,
 	return 0;
 }
 
-static void tidss_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-	kfree(encoder);
-}
-
 static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
 	.atomic_check = tidss_encoder_atomic_check,
 };
 
-static const struct drm_encoder_funcs encoder_funcs = {
-	.destroy = tidss_encoder_destroy,
-};
-
 struct drm_encoder *tidss_encoder_create(struct tidss_device *tidss,
 					 u32 encoder_type, u32 possible_crtcs)
 {
 	struct drm_encoder *enc;
 	int ret;
 
-	enc = kzalloc(sizeof(*enc), GFP_KERNEL);
+	enc = devm_kzalloc(tidss->dev, sizeof(*enc), GFP_KERNEL);
 	if (!enc)
 		return ERR_PTR(-ENOMEM);
 
 	enc->possible_crtcs = possible_crtcs;
 
-	ret = drm_encoder_init(&tidss->ddev, enc, &encoder_funcs,
-			       encoder_type, NULL);
-	if (ret < 0) {
-		kfree(enc);
+	ret = drm_simple_encoder_init(&tidss->ddev, enc, encoder_type);
+	if (ret < 0)
 		return ERR_PTR(ret);
-	}
 
 	drm_encoder_helper_add(enc, &encoder_helper_funcs);
 
diff --git a/drivers/gpu/drm/tidss/tidss_irq.c b/drivers/gpu/drm/tidss/tidss_irq.c
index 612c046738e5..1b80f2d62e0a 100644
--- a/drivers/gpu/drm/tidss/tidss_irq.c
+++ b/drivers/gpu/drm/tidss/tidss_irq.c
@@ -23,7 +23,7 @@ static void tidss_irq_update(struct tidss_device *tidss)
 void tidss_irq_enable_vblank(struct drm_crtc *crtc)
 {
 	struct drm_device *ddev = crtc->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	struct tidss_crtc *tcrtc = to_tidss_crtc(crtc);
 	u32 hw_videoport = tcrtc->hw_videoport;
 	unsigned long flags;
@@ -38,7 +38,7 @@ void tidss_irq_enable_vblank(struct drm_crtc *crtc)
 void tidss_irq_disable_vblank(struct drm_crtc *crtc)
 {
 	struct drm_device *ddev = crtc->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	struct tidss_crtc *tcrtc = to_tidss_crtc(crtc);
 	u32 hw_videoport = tcrtc->hw_videoport;
 	unsigned long flags;
@@ -53,7 +53,7 @@ void tidss_irq_disable_vblank(struct drm_crtc *crtc)
 irqreturn_t tidss_irq_handler(int irq, void *arg)
 {
 	struct drm_device *ddev = (struct drm_device *)arg;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	unsigned int id;
 	dispc_irq_t irqstatus;
 
@@ -95,7 +95,7 @@ void tidss_irq_resume(struct tidss_device *tidss)
 
 void tidss_irq_preinstall(struct drm_device *ddev)
 {
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 
 	spin_lock_init(&tidss->wait_lock);
 
@@ -109,7 +109,7 @@ void tidss_irq_preinstall(struct drm_device *ddev)
 
 int tidss_irq_postinstall(struct drm_device *ddev)
 {
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	unsigned long flags;
 	unsigned int i;
 
@@ -138,7 +138,7 @@ int tidss_irq_postinstall(struct drm_device *ddev)
 
 void tidss_irq_uninstall(struct drm_device *ddev)
 {
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 
 	tidss_runtime_get(tidss);
 	dispc_set_irqenable(tidss->dispc, 0);
diff --git a/drivers/gpu/drm/tidss/tidss_kms.c b/drivers/gpu/drm/tidss/tidss_kms.c
index 7d419960b030..4b99e9fa84a5 100644
--- a/drivers/gpu/drm/tidss/tidss_kms.c
+++ b/drivers/gpu/drm/tidss/tidss_kms.c
@@ -25,7 +25,7 @@
 static void tidss_atomic_commit_tail(struct drm_atomic_state *old_state)
 {
 	struct drm_device *ddev = old_state->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 
 	dev_dbg(ddev->dev, "%s\n", __func__);
 
@@ -258,7 +258,9 @@ int tidss_modeset_init(struct tidss_device *tidss)
 
 	dev_dbg(tidss->dev, "%s\n", __func__);
 
-	drm_mode_config_init(ddev);
+	ret = drmm_mode_config_init(ddev);
+	if (ret)
+		return ret;
 
 	ddev->mode_config.min_width = 8;
 	ddev->mode_config.min_height = 8;
@@ -270,11 +272,11 @@ int tidss_modeset_init(struct tidss_device *tidss)
 
 	ret = tidss_dispc_modeset_init(tidss);
 	if (ret)
-		goto err_mode_config_cleanup;
+		return ret;
 
 	ret = drm_vblank_init(ddev, tidss->num_crtcs);
 	if (ret)
-		goto err_mode_config_cleanup;
+		return ret;
 
 	/* Start with vertical blanking interrupt reporting disabled. */
 	for (i = 0; i < tidss->num_crtcs; ++i)
@@ -285,15 +287,4 @@ int tidss_modeset_init(struct tidss_device *tidss)
 	dev_dbg(tidss->dev, "%s done\n", __func__);
 
 	return 0;
-
-err_mode_config_cleanup:
-	drm_mode_config_cleanup(ddev);
-	return ret;
-}
-
-void tidss_modeset_cleanup(struct tidss_device *tidss)
-{
-	struct drm_device *ddev = &tidss->ddev;
-
-	drm_mode_config_cleanup(ddev);
 }
diff --git a/drivers/gpu/drm/tidss/tidss_kms.h b/drivers/gpu/drm/tidss/tidss_kms.h
index dda5625d0128..99aaff099f22 100644
--- a/drivers/gpu/drm/tidss/tidss_kms.h
+++ b/drivers/gpu/drm/tidss/tidss_kms.h
@@ -10,6 +10,5 @@
 struct tidss_device;
 
 int tidss_modeset_init(struct tidss_device *tidss);
-void tidss_modeset_cleanup(struct tidss_device *tidss);
 
 #endif
diff --git a/drivers/gpu/drm/tidss/tidss_plane.c b/drivers/gpu/drm/tidss/tidss_plane.c
index 798488948fc5..0a563eabcbb9 100644
--- a/drivers/gpu/drm/tidss/tidss_plane.c
+++ b/drivers/gpu/drm/tidss/tidss_plane.c
@@ -22,7 +22,7 @@ static int tidss_plane_atomic_check(struct drm_plane *plane,
 				    struct drm_plane_state *state)
 {
 	struct drm_device *ddev = plane->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	struct tidss_plane *tplane = to_tidss_plane(plane);
 	const struct drm_format_info *finfo;
 	struct drm_crtc_state *crtc_state;
@@ -101,7 +101,7 @@ static void tidss_plane_atomic_update(struct drm_plane *plane,
 				      struct drm_plane_state *old_state)
 {
 	struct drm_device *ddev = plane->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	struct tidss_plane *tplane = to_tidss_plane(plane);
 	struct drm_plane_state *state = plane->state;
 	u32 hw_videoport;
@@ -133,7 +133,7 @@ static void tidss_plane_atomic_disable(struct drm_plane *plane,
 				       struct drm_plane_state *old_state)
 {
 	struct drm_device *ddev = plane->dev;
-	struct tidss_device *tidss = ddev->dev_private;
+	struct tidss_device *tidss = to_tidss(ddev);
 	struct tidss_plane *tplane = to_tidss_plane(plane);
 
 	dev_dbg(ddev->dev, "%s\n", __func__);
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
index 0791a0200cc3..a5e9ee4c7fbf 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
@@ -390,10 +390,9 @@ static int tilcdc_init(struct drm_driver *ddrv, struct device *dev)
 	ret = drm_dev_register(ddev, 0);
 	if (ret)
 		goto init_failed;
+	priv->is_registered = true;
 
 	drm_fbdev_generic_setup(ddev, bpp);
-
-	priv->is_registered = true;
 	return 0;
 
 init_failed:
@@ -478,26 +477,17 @@ static struct drm_info_list tilcdc_debugfs_list[] = {
 		{ "mm",   tilcdc_mm_show,   0 },
 };
 
-static int tilcdc_debugfs_init(struct drm_minor *minor)
+static void tilcdc_debugfs_init(struct drm_minor *minor)
 {
-	struct drm_device *dev = minor->dev;
 	struct tilcdc_module *mod;
-	int ret;
 
-	ret = drm_debugfs_create_files(tilcdc_debugfs_list,
-			ARRAY_SIZE(tilcdc_debugfs_list),
-			minor->debugfs_root, minor);
+	drm_debugfs_create_files(tilcdc_debugfs_list,
+				 ARRAY_SIZE(tilcdc_debugfs_list),
+				 minor->debugfs_root, minor);
 
 	list_for_each_entry(mod, &module_list, list)
 		if (mod->funcs->debugfs_init)
 			mod->funcs->debugfs_init(mod, minor);
-
-	if (ret) {
-		dev_err(dev->dev, "could not install tilcdc_debugfs_list\n");
-		return ret;
-	}
-
-	return ret;
 }
 #endif
 
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_external.c b/drivers/gpu/drm/tilcdc/tilcdc_external.c
index 28b7f703236e..b177525588c1 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_external.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_external.c
@@ -10,6 +10,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_of.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "tilcdc_drv.h"
 #include "tilcdc_external.h"
@@ -83,10 +84,6 @@ int tilcdc_add_component_encoder(struct drm_device *ddev)
 	return 0;
 }
 
-static const struct drm_encoder_funcs tilcdc_external_encoder_funcs = {
-	.destroy	= drm_encoder_cleanup,
-};
-
 static
 int tilcdc_attach_bridge(struct drm_device *ddev, struct drm_bridge *bridge)
 {
@@ -131,9 +128,8 @@ int tilcdc_attach_external_device(struct drm_device *ddev)
 	if (!priv->external_encoder)
 		return -ENOMEM;
 
-	ret = drm_encoder_init(ddev, priv->external_encoder,
-			       &tilcdc_external_encoder_funcs,
-			       DRM_MODE_ENCODER_NONE, NULL);
+	ret = drm_simple_encoder_init(ddev, priv->external_encoder,
+				      DRM_MODE_ENCODER_NONE);
 	if (ret) {
 		dev_err(ddev->dev, "drm_encoder_init() failed %d\n", ret);
 		return ret;
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
index 5584e656b857..12823d60c4e8 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
@@ -16,6 +16,7 @@
 #include <drm/drm_connector.h>
 #include <drm/drm_modeset_helper_vtables.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "tilcdc_drv.h"
 #include "tilcdc_panel.h"
@@ -74,10 +75,6 @@ static void panel_encoder_mode_set(struct drm_encoder *encoder,
 	/* nothing needed */
 }
 
-static const struct drm_encoder_funcs panel_encoder_funcs = {
-		.destroy        = drm_encoder_cleanup,
-};
-
 static const struct drm_encoder_helper_funcs panel_encoder_helper_funcs = {
 		.dpms           = panel_encoder_dpms,
 		.prepare        = panel_encoder_prepare,
@@ -102,8 +99,7 @@ static struct drm_encoder *panel_encoder_create(struct drm_device *dev,
 	encoder = &panel_encoder->base;
 	encoder->possible_crtcs = 1;
 
-	ret = drm_encoder_init(dev, encoder, &panel_encoder_funcs,
-			DRM_MODE_ENCODER_LVDS, NULL);
+	ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS);
 	if (ret < 0)
 		goto fail;
 
diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
index 4160e74e4751..2b6414f0fa75 100644
--- a/drivers/gpu/drm/tiny/Kconfig
+++ b/drivers/gpu/drm/tiny/Kconfig
@@ -1,5 +1,24 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
+config DRM_CIRRUS_QEMU
+	tristate "Cirrus driver for QEMU emulated device"
+	depends on DRM && PCI && MMU
+	select DRM_KMS_HELPER
+	select DRM_GEM_SHMEM_HELPER
+	help
+	 This is a KMS driver for emulated cirrus device in qemu.
+	 It is *NOT* intended for real cirrus devices. This requires
+	 the modesetting userspace X.org driver.
+
+	 Cirrus is obsolete, the hardware was designed in the 90ies
+	 and can't keep up with todays needs.  More background:
+	 https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
+
+	 Better alternatives are:
+	   - stdvga (DRM_BOCHS, qemu -vga std, default in qemu 2.2+)
+	   - qxl (DRM_QXL, qemu -vga qxl, works best with spice)
+	   - virtio (DRM_VIRTIO_GPU), qemu -vga virtio)
+
 config DRM_GM12U320
 	tristate "GM12U320 driver for USB projectors"
 	depends on DRM && USB
diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile
index c96ceee71453..6ae4e9e5a35f 100644
--- a/drivers/gpu/drm/tiny/Makefile
+++ b/drivers/gpu/drm/tiny/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
+obj-$(CONFIG_DRM_CIRRUS_QEMU)		+= cirrus.o
 obj-$(CONFIG_DRM_GM12U320)		+= gm12u320.o
 obj-$(CONFIG_TINYDRM_HX8357D)		+= hx8357d.o
 obj-$(CONFIG_TINYDRM_ILI9225)		+= ili9225.o
diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
new file mode 100644
index 000000000000..744a8e337e41
--- /dev/null
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -0,0 +1,660 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2012-2019 Red Hat
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License version 2. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Authors: Matthew Garrett
+ *	    Dave Airlie
+ *	    Gerd Hoffmann
+ *
+ * Portions of this code derived from cirrusfb.c:
+ * drivers/video/cirrusfb.c - driver for Cirrus Logic chipsets
+ *
+ * Copyright 1999-2001 Jeff Garzik <jgarzik@pobox.com>
+ */
+
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include <video/cirrus.h>
+#include <video/vga.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_file.h>
+#include <drm/drm_format_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_gem_shmem_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_ioctl.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#define DRIVER_NAME "cirrus"
+#define DRIVER_DESC "qemu cirrus vga"
+#define DRIVER_DATE "2019"
+#define DRIVER_MAJOR 2
+#define DRIVER_MINOR 0
+
+#define CIRRUS_MAX_PITCH (0x1FF << 3)      /* (4096 - 1) & ~111b bytes */
+#define CIRRUS_VRAM_SIZE (4 * 1024 * 1024) /* 4 MB */
+
+struct cirrus_device {
+	struct drm_device	       dev;
+	struct drm_simple_display_pipe pipe;
+	struct drm_connector	       conn;
+	unsigned int		       cpp;
+	unsigned int		       pitch;
+	void __iomem		       *vram;
+	void __iomem		       *mmio;
+};
+
+#define to_cirrus(_dev) container_of(_dev, struct cirrus_device, dev)
+
+/* ------------------------------------------------------------------ */
+/*
+ * The meat of this driver. The core passes us a mode and we have to program
+ * it. The modesetting here is the bare minimum required to satisfy the qemu
+ * emulation of this hardware, and running this against a real device is
+ * likely to result in an inadequately programmed mode. We've already had
+ * the opportunity to modify the mode, so whatever we receive here should
+ * be something that can be correctly programmed and displayed
+ */
+
+#define SEQ_INDEX 4
+#define SEQ_DATA 5
+
+static u8 rreg_seq(struct cirrus_device *cirrus, u8 reg)
+{
+	iowrite8(reg, cirrus->mmio + SEQ_INDEX);
+	return ioread8(cirrus->mmio + SEQ_DATA);
+}
+
+static void wreg_seq(struct cirrus_device *cirrus, u8 reg, u8 val)
+{
+	iowrite8(reg, cirrus->mmio + SEQ_INDEX);
+	iowrite8(val, cirrus->mmio + SEQ_DATA);
+}
+
+#define CRT_INDEX 0x14
+#define CRT_DATA 0x15
+
+static u8 rreg_crt(struct cirrus_device *cirrus, u8 reg)
+{
+	iowrite8(reg, cirrus->mmio + CRT_INDEX);
+	return ioread8(cirrus->mmio + CRT_DATA);
+}
+
+static void wreg_crt(struct cirrus_device *cirrus, u8 reg, u8 val)
+{
+	iowrite8(reg, cirrus->mmio + CRT_INDEX);
+	iowrite8(val, cirrus->mmio + CRT_DATA);
+}
+
+#define GFX_INDEX 0xe
+#define GFX_DATA 0xf
+
+static void wreg_gfx(struct cirrus_device *cirrus, u8 reg, u8 val)
+{
+	iowrite8(reg, cirrus->mmio + GFX_INDEX);
+	iowrite8(val, cirrus->mmio + GFX_DATA);
+}
+
+#define VGA_DAC_MASK  0x06
+
+static void wreg_hdr(struct cirrus_device *cirrus, u8 val)
+{
+	ioread8(cirrus->mmio + VGA_DAC_MASK);
+	ioread8(cirrus->mmio + VGA_DAC_MASK);
+	ioread8(cirrus->mmio + VGA_DAC_MASK);
+	ioread8(cirrus->mmio + VGA_DAC_MASK);
+	iowrite8(val, cirrus->mmio + VGA_DAC_MASK);
+}
+
+static int cirrus_convert_to(struct drm_framebuffer *fb)
+{
+	if (fb->format->cpp[0] == 4 && fb->pitches[0] > CIRRUS_MAX_PITCH) {
+		if (fb->width * 3 <= CIRRUS_MAX_PITCH)
+			/* convert from XR24 to RG24 */
+			return 3;
+		else
+			/* convert from XR24 to RG16 */
+			return 2;
+	}
+	return 0;
+}
+
+static int cirrus_cpp(struct drm_framebuffer *fb)
+{
+	int convert_cpp = cirrus_convert_to(fb);
+
+	if (convert_cpp)
+		return convert_cpp;
+	return fb->format->cpp[0];
+}
+
+static int cirrus_pitch(struct drm_framebuffer *fb)
+{
+	int convert_cpp = cirrus_convert_to(fb);
+
+	if (convert_cpp)
+		return convert_cpp * fb->width;
+	return fb->pitches[0];
+}
+
+static void cirrus_set_start_address(struct cirrus_device *cirrus, u32 offset)
+{
+	int idx;
+	u32 addr;
+	u8 tmp;
+
+	if (!drm_dev_enter(&cirrus->dev, &idx))
+		return;
+
+	addr = offset >> 2;
+	wreg_crt(cirrus, 0x0c, (u8)((addr >> 8) & 0xff));
+	wreg_crt(cirrus, 0x0d, (u8)(addr & 0xff));
+
+	tmp = rreg_crt(cirrus, 0x1b);
+	tmp &= 0xf2;
+	tmp |= (addr >> 16) & 0x01;
+	tmp |= (addr >> 15) & 0x0c;
+	wreg_crt(cirrus, 0x1b, tmp);
+
+	tmp = rreg_crt(cirrus, 0x1d);
+	tmp &= 0x7f;
+	tmp |= (addr >> 12) & 0x80;
+	wreg_crt(cirrus, 0x1d, tmp);
+
+	drm_dev_exit(idx);
+}
+
+static int cirrus_mode_set(struct cirrus_device *cirrus,
+			   struct drm_display_mode *mode,
+			   struct drm_framebuffer *fb)
+{
+	int hsyncstart, hsyncend, htotal, hdispend;
+	int vtotal, vdispend;
+	int tmp, idx;
+	int sr07 = 0, hdr = 0;
+
+	if (!drm_dev_enter(&cirrus->dev, &idx))
+		return -1;
+
+	htotal = mode->htotal / 8;
+	hsyncend = mode->hsync_end / 8;
+	hsyncstart = mode->hsync_start / 8;
+	hdispend = mode->hdisplay / 8;
+
+	vtotal = mode->vtotal;
+	vdispend = mode->vdisplay;
+
+	vdispend -= 1;
+	vtotal -= 2;
+
+	htotal -= 5;
+	hdispend -= 1;
+	hsyncstart += 1;
+	hsyncend += 1;
+
+	wreg_crt(cirrus, VGA_CRTC_V_SYNC_END, 0x20);
+	wreg_crt(cirrus, VGA_CRTC_H_TOTAL, htotal);
+	wreg_crt(cirrus, VGA_CRTC_H_DISP, hdispend);
+	wreg_crt(cirrus, VGA_CRTC_H_SYNC_START, hsyncstart);
+	wreg_crt(cirrus, VGA_CRTC_H_SYNC_END, hsyncend);
+	wreg_crt(cirrus, VGA_CRTC_V_TOTAL, vtotal & 0xff);
+	wreg_crt(cirrus, VGA_CRTC_V_DISP_END, vdispend & 0xff);
+
+	tmp = 0x40;
+	if ((vdispend + 1) & 512)
+		tmp |= 0x20;
+	wreg_crt(cirrus, VGA_CRTC_MAX_SCAN, tmp);
+
+	/*
+	 * Overflow bits for values that don't fit in the standard registers
+	 */
+	tmp = 0x10;
+	if (vtotal & 0x100)
+		tmp |= 0x01;
+	if (vdispend & 0x100)
+		tmp |= 0x02;
+	if ((vdispend + 1) & 0x100)
+		tmp |= 0x08;
+	if (vtotal & 0x200)
+		tmp |= 0x20;
+	if (vdispend & 0x200)
+		tmp |= 0x40;
+	wreg_crt(cirrus, VGA_CRTC_OVERFLOW, tmp);
+
+	tmp = 0;
+
+	/* More overflow bits */
+
+	if ((htotal + 5) & 0x40)
+		tmp |= 0x10;
+	if ((htotal + 5) & 0x80)
+		tmp |= 0x20;
+	if (vtotal & 0x100)
+		tmp |= 0x40;
+	if (vtotal & 0x200)
+		tmp |= 0x80;
+
+	wreg_crt(cirrus, CL_CRT1A, tmp);
+
+	/* Disable Hercules/CGA compatibility */
+	wreg_crt(cirrus, VGA_CRTC_MODE, 0x03);
+
+	sr07 = rreg_seq(cirrus, 0x07);
+	sr07 &= 0xe0;
+	hdr = 0;
+
+	cirrus->cpp = cirrus_cpp(fb);
+	switch (cirrus->cpp * 8) {
+	case 8:
+		sr07 |= 0x11;
+		break;
+	case 16:
+		sr07 |= 0x17;
+		hdr = 0xc1;
+		break;
+	case 24:
+		sr07 |= 0x15;
+		hdr = 0xc5;
+		break;
+	case 32:
+		sr07 |= 0x19;
+		hdr = 0xc5;
+		break;
+	default:
+		drm_dev_exit(idx);
+		return -1;
+	}
+
+	wreg_seq(cirrus, 0x7, sr07);
+
+	/* Program the pitch */
+	cirrus->pitch = cirrus_pitch(fb);
+	tmp = cirrus->pitch / 8;
+	wreg_crt(cirrus, VGA_CRTC_OFFSET, tmp);
+
+	/* Enable extended blanking and pitch bits, and enable full memory */
+	tmp = 0x22;
+	tmp |= (cirrus->pitch >> 7) & 0x10;
+	tmp |= (cirrus->pitch >> 6) & 0x40;
+	wreg_crt(cirrus, 0x1b, tmp);
+
+	/* Enable high-colour modes */
+	wreg_gfx(cirrus, VGA_GFX_MODE, 0x40);
+
+	/* And set graphics mode */
+	wreg_gfx(cirrus, VGA_GFX_MISC, 0x01);
+
+	wreg_hdr(cirrus, hdr);
+
+	cirrus_set_start_address(cirrus, 0);
+
+	/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
+	outb(0x20, 0x3c0);
+
+	drm_dev_exit(idx);
+	return 0;
+}
+
+static int cirrus_fb_blit_rect(struct drm_framebuffer *fb,
+			       struct drm_rect *rect)
+{
+	struct cirrus_device *cirrus = to_cirrus(fb->dev);
+	void *vmap;
+	int idx, ret;
+
+	ret = -ENODEV;
+	if (!drm_dev_enter(&cirrus->dev, &idx))
+		goto out;
+
+	ret = -ENOMEM;
+	vmap = drm_gem_shmem_vmap(fb->obj[0]);
+	if (!vmap)
+		goto out_dev_exit;
+
+	if (cirrus->cpp == fb->format->cpp[0])
+		drm_fb_memcpy_dstclip(cirrus->vram,
+				      vmap, fb, rect);
+
+	else if (fb->format->cpp[0] == 4 && cirrus->cpp == 2)
+		drm_fb_xrgb8888_to_rgb565_dstclip(cirrus->vram,
+						  cirrus->pitch,
+						  vmap, fb, rect, false);
+
+	else if (fb->format->cpp[0] == 4 && cirrus->cpp == 3)
+		drm_fb_xrgb8888_to_rgb888_dstclip(cirrus->vram,
+						  cirrus->pitch,
+						  vmap, fb, rect);
+
+	else
+		WARN_ON_ONCE("cpp mismatch");
+
+	drm_gem_shmem_vunmap(fb->obj[0], vmap);
+	ret = 0;
+
+out_dev_exit:
+	drm_dev_exit(idx);
+out:
+	return ret;
+}
+
+static int cirrus_fb_blit_fullscreen(struct drm_framebuffer *fb)
+{
+	struct drm_rect fullscreen = {
+		.x1 = 0,
+		.x2 = fb->width,
+		.y1 = 0,
+		.y2 = fb->height,
+	};
+	return cirrus_fb_blit_rect(fb, &fullscreen);
+}
+
+static int cirrus_check_size(int width, int height,
+			     struct drm_framebuffer *fb)
+{
+	int pitch = width * 2;
+
+	if (fb)
+		pitch = cirrus_pitch(fb);
+
+	if (pitch > CIRRUS_MAX_PITCH)
+		return -EINVAL;
+	if (pitch * height > CIRRUS_VRAM_SIZE)
+		return -EINVAL;
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+/* cirrus connector						      */
+
+static int cirrus_conn_get_modes(struct drm_connector *conn)
+{
+	int count;
+
+	count = drm_add_modes_noedid(conn,
+				     conn->dev->mode_config.max_width,
+				     conn->dev->mode_config.max_height);
+	drm_set_preferred_mode(conn, 1024, 768);
+	return count;
+}
+
+static const struct drm_connector_helper_funcs cirrus_conn_helper_funcs = {
+	.get_modes = cirrus_conn_get_modes,
+};
+
+static const struct drm_connector_funcs cirrus_conn_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int cirrus_conn_init(struct cirrus_device *cirrus)
+{
+	drm_connector_helper_add(&cirrus->conn, &cirrus_conn_helper_funcs);
+	return drm_connector_init(&cirrus->dev, &cirrus->conn,
+				  &cirrus_conn_funcs, DRM_MODE_CONNECTOR_VGA);
+
+}
+
+/* ------------------------------------------------------------------ */
+/* cirrus (simple) display pipe					      */
+
+static enum drm_mode_status cirrus_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
+						   const struct drm_display_mode *mode)
+{
+	if (cirrus_check_size(mode->hdisplay, mode->vdisplay, NULL) < 0)
+		return MODE_BAD;
+	return MODE_OK;
+}
+
+static int cirrus_pipe_check(struct drm_simple_display_pipe *pipe,
+			     struct drm_plane_state *plane_state,
+			     struct drm_crtc_state *crtc_state)
+{
+	struct drm_framebuffer *fb = plane_state->fb;
+
+	if (!fb)
+		return 0;
+	return cirrus_check_size(fb->width, fb->height, fb);
+}
+
+static void cirrus_pipe_enable(struct drm_simple_display_pipe *pipe,
+			       struct drm_crtc_state *crtc_state,
+			       struct drm_plane_state *plane_state)
+{
+	struct cirrus_device *cirrus = to_cirrus(pipe->crtc.dev);
+
+	cirrus_mode_set(cirrus, &crtc_state->mode, plane_state->fb);
+	cirrus_fb_blit_fullscreen(plane_state->fb);
+}
+
+static void cirrus_pipe_update(struct drm_simple_display_pipe *pipe,
+			       struct drm_plane_state *old_state)
+{
+	struct cirrus_device *cirrus = to_cirrus(pipe->crtc.dev);
+	struct drm_plane_state *state = pipe->plane.state;
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_rect rect;
+
+	if (pipe->plane.state->fb &&
+	    cirrus->cpp != cirrus_cpp(pipe->plane.state->fb))
+		cirrus_mode_set(cirrus, &crtc->mode,
+				pipe->plane.state->fb);
+
+	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
+		cirrus_fb_blit_rect(pipe->plane.state->fb, &rect);
+}
+
+static const struct drm_simple_display_pipe_funcs cirrus_pipe_funcs = {
+	.mode_valid = cirrus_pipe_mode_valid,
+	.check	    = cirrus_pipe_check,
+	.enable	    = cirrus_pipe_enable,
+	.update	    = cirrus_pipe_update,
+};
+
+static const uint32_t cirrus_formats[] = {
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_XRGB8888,
+};
+
+static const uint64_t cirrus_modifiers[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID
+};
+
+static int cirrus_pipe_init(struct cirrus_device *cirrus)
+{
+	return drm_simple_display_pipe_init(&cirrus->dev,
+					    &cirrus->pipe,
+					    &cirrus_pipe_funcs,
+					    cirrus_formats,
+					    ARRAY_SIZE(cirrus_formats),
+					    cirrus_modifiers,
+					    &cirrus->conn);
+}
+
+/* ------------------------------------------------------------------ */
+/* cirrus framebuffers & mode config				      */
+
+static struct drm_framebuffer*
+cirrus_fb_create(struct drm_device *dev, struct drm_file *file_priv,
+		 const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	if (mode_cmd->pixel_format != DRM_FORMAT_RGB565 &&
+	    mode_cmd->pixel_format != DRM_FORMAT_RGB888 &&
+	    mode_cmd->pixel_format != DRM_FORMAT_XRGB8888)
+		return ERR_PTR(-EINVAL);
+	if (cirrus_check_size(mode_cmd->width, mode_cmd->height, NULL) < 0)
+		return ERR_PTR(-EINVAL);
+	return drm_gem_fb_create_with_dirty(dev, file_priv, mode_cmd);
+}
+
+static const struct drm_mode_config_funcs cirrus_mode_config_funcs = {
+	.fb_create = cirrus_fb_create,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static int cirrus_mode_config_init(struct cirrus_device *cirrus)
+{
+	struct drm_device *dev = &cirrus->dev;
+	int ret;
+
+	ret = drmm_mode_config_init(dev);
+	if (ret)
+		return ret;
+
+	dev->mode_config.min_width = 0;
+	dev->mode_config.min_height = 0;
+	dev->mode_config.max_width = CIRRUS_MAX_PITCH / 2;
+	dev->mode_config.max_height = 1024;
+	dev->mode_config.preferred_depth = 16;
+	dev->mode_config.prefer_shadow = 0;
+	dev->mode_config.funcs = &cirrus_mode_config_funcs;
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+DEFINE_DRM_GEM_FOPS(cirrus_fops);
+
+static struct drm_driver cirrus_driver = {
+	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
+
+	.name		 = DRIVER_NAME,
+	.desc		 = DRIVER_DESC,
+	.date		 = DRIVER_DATE,
+	.major		 = DRIVER_MAJOR,
+	.minor		 = DRIVER_MINOR,
+
+	.fops		 = &cirrus_fops,
+	DRM_GEM_SHMEM_DRIVER_OPS,
+};
+
+static int cirrus_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
+{
+	struct drm_device *dev;
+	struct cirrus_device *cirrus;
+	int ret;
+
+	ret = drm_fb_helper_remove_conflicting_pci_framebuffers(pdev, "cirrusdrmfb");
+	if (ret)
+		return ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pci_request_regions(pdev, DRIVER_NAME);
+	if (ret)
+		return ret;
+
+	ret = -ENOMEM;
+	cirrus = devm_drm_dev_alloc(&pdev->dev, &cirrus_driver,
+				    struct cirrus_device, dev);
+	if (IS_ERR(cirrus))
+		return PTR_ERR(cirrus);
+
+	dev = &cirrus->dev;
+
+	cirrus->vram = devm_ioremap(&pdev->dev, pci_resource_start(pdev, 0),
+				    pci_resource_len(pdev, 0));
+	if (cirrus->vram == NULL)
+		return -ENOMEM;
+
+	cirrus->mmio = devm_ioremap(&pdev->dev, pci_resource_start(pdev, 1),
+				    pci_resource_len(pdev, 1));
+	if (cirrus->mmio == NULL)
+		return -ENOMEM;
+
+	ret = cirrus_mode_config_init(cirrus);
+	if (ret)
+		return ret;
+
+	ret = cirrus_conn_init(cirrus);
+	if (ret < 0)
+		return ret;
+
+	ret = cirrus_pipe_init(cirrus);
+	if (ret < 0)
+		return ret;
+
+	drm_mode_config_reset(dev);
+
+	dev->pdev = pdev;
+	pci_set_drvdata(pdev, dev);
+	ret = drm_dev_register(dev, 0);
+	if (ret)
+		return ret;
+
+	drm_fbdev_generic_setup(dev, dev->mode_config.preferred_depth);
+	return 0;
+}
+
+static void cirrus_pci_remove(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+
+	drm_dev_unplug(dev);
+	drm_atomic_helper_shutdown(dev);
+}
+
+static const struct pci_device_id pciidlist[] = {
+	{
+		.vendor    = PCI_VENDOR_ID_CIRRUS,
+		.device    = PCI_DEVICE_ID_CIRRUS_5446,
+		/* only bind to the cirrus chip in qemu */
+		.subvendor = PCI_SUBVENDOR_ID_REDHAT_QUMRANET,
+		.subdevice = PCI_SUBDEVICE_ID_QEMU,
+	}, {
+		.vendor    = PCI_VENDOR_ID_CIRRUS,
+		.device    = PCI_DEVICE_ID_CIRRUS_5446,
+		.subvendor = PCI_VENDOR_ID_XEN,
+		.subdevice = 0x0001,
+	},
+	{ /* end if list */ }
+};
+
+static struct pci_driver cirrus_pci_driver = {
+	.name = DRIVER_NAME,
+	.id_table = pciidlist,
+	.probe = cirrus_pci_probe,
+	.remove = cirrus_pci_remove,
+};
+
+static int __init cirrus_init(void)
+{
+	if (vgacon_text_force())
+		return -EINVAL;
+	return pci_register_driver(&cirrus_pci_driver);
+}
+
+static void __exit cirrus_exit(void)
+{
+	pci_unregister_driver(&cirrus_pci_driver);
+}
+
+module_init(cirrus_init);
+module_exit(cirrus_exit);
+
+MODULE_DEVICE_TABLE(pci, pciidlist);
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/tiny/gm12u320.c b/drivers/gpu/drm/tiny/gm12u320.c
index a48173441ae0..cc397671f689 100644
--- a/drivers/gpu/drm/tiny/gm12u320.c
+++ b/drivers/gpu/drm/tiny/gm12u320.c
@@ -19,6 +19,7 @@
 #include <drm/drm_gem_shmem_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_ioctl.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_modeset_helper_vtables.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_simple_kms_helper.h>
@@ -87,18 +88,18 @@ struct gm12u320_device {
 	struct usb_device               *udev;
 	unsigned char                   *cmd_buf;
 	unsigned char                   *data_buf[GM12U320_BLOCK_COUNT];
-	bool                             pipe_enabled;
 	struct {
-		bool                     run;
-		struct workqueue_struct *workq;
-		struct work_struct       work;
-		wait_queue_head_t        waitq;
+		struct delayed_work       work;
 		struct mutex             lock;
 		struct drm_framebuffer  *fb;
 		struct drm_rect          rect;
+		int frame;
+		int draw_status_timeout;
 	} fb_update;
 };
 
+#define to_gm12u320(__dev) container_of(__dev, struct gm12u320_device, dev)
+
 static const char cmd_data[CMD_SIZE] = {
 	0x55, 0x53, 0x42, 0x43, 0x00, 0x00, 0x00, 0x00,
 	0x68, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x10, 0xff,
@@ -159,7 +160,7 @@ static int gm12u320_usb_alloc(struct gm12u320_device *gm12u320)
 	int i, block_size;
 	const char *hdr;
 
-	gm12u320->cmd_buf = kmalloc(CMD_SIZE, GFP_KERNEL);
+	gm12u320->cmd_buf = drmm_kmalloc(&gm12u320->dev, CMD_SIZE, GFP_KERNEL);
 	if (!gm12u320->cmd_buf)
 		return -ENOMEM;
 
@@ -172,7 +173,8 @@ static int gm12u320_usb_alloc(struct gm12u320_device *gm12u320)
 			hdr = data_block_header;
 		}
 
-		gm12u320->data_buf[i] = kzalloc(block_size, GFP_KERNEL);
+		gm12u320->data_buf[i] = drmm_kzalloc(&gm12u320->dev,
+						     block_size, GFP_KERNEL);
 		if (!gm12u320->data_buf[i])
 			return -ENOMEM;
 
@@ -182,26 +184,9 @@ static int gm12u320_usb_alloc(struct gm12u320_device *gm12u320)
 		       data_block_footer, DATA_BLOCK_FOOTER_SIZE);
 	}
 
-	gm12u320->fb_update.workq = create_singlethread_workqueue(DRIVER_NAME);
-	if (!gm12u320->fb_update.workq)
-		return -ENOMEM;
-
 	return 0;
 }
 
-static void gm12u320_usb_free(struct gm12u320_device *gm12u320)
-{
-	int i;
-
-	if (gm12u320->fb_update.workq)
-		destroy_workqueue(gm12u320->fb_update.workq);
-
-	for (i = 0; i < GM12U320_BLOCK_COUNT; i++)
-		kfree(gm12u320->data_buf[i]);
-
-	kfree(gm12u320->cmd_buf);
-}
-
 static int gm12u320_misc_request(struct gm12u320_device *gm12u320,
 				 u8 req_a, u8 req_b,
 				 u8 arg_a, u8 arg_b, u8 arg_c, u8 arg_d)
@@ -344,80 +329,77 @@ static void gm12u320_copy_fb_to_blocks(struct gm12u320_device *gm12u320)
 static void gm12u320_fb_update_work(struct work_struct *work)
 {
 	struct gm12u320_device *gm12u320 =
-		container_of(work, struct gm12u320_device, fb_update.work);
-	int draw_status_timeout = FIRST_FRAME_TIMEOUT;
+		container_of(to_delayed_work(work), struct gm12u320_device,
+			     fb_update.work);
 	int block, block_size, len;
-	int frame = 0;
 	int ret = 0;
 
-	while (gm12u320->fb_update.run) {
-		gm12u320_copy_fb_to_blocks(gm12u320);
-
-		for (block = 0; block < GM12U320_BLOCK_COUNT; block++) {
-			if (block == GM12U320_BLOCK_COUNT - 1)
-				block_size = DATA_LAST_BLOCK_SIZE;
-			else
-				block_size = DATA_BLOCK_SIZE;
-
-			/* Send data command to device */
-			memcpy(gm12u320->cmd_buf, cmd_data, CMD_SIZE);
-			gm12u320->cmd_buf[8] = block_size & 0xff;
-			gm12u320->cmd_buf[9] = block_size >> 8;
-			gm12u320->cmd_buf[20] = 0xfc - block * 4;
-			gm12u320->cmd_buf[21] = block | (frame << 7);
-
-			ret = usb_bulk_msg(gm12u320->udev,
-				usb_sndbulkpipe(gm12u320->udev, DATA_SND_EPT),
-				gm12u320->cmd_buf, CMD_SIZE, &len,
-				CMD_TIMEOUT);
-			if (ret || len != CMD_SIZE)
-				goto err;
-
-			/* Send data block to device */
-			ret = usb_bulk_msg(gm12u320->udev,
-				usb_sndbulkpipe(gm12u320->udev, DATA_SND_EPT),
-				gm12u320->data_buf[block], block_size,
-				&len, DATA_TIMEOUT);
-			if (ret || len != block_size)
-				goto err;
-
-			/* Read status */
-			ret = usb_bulk_msg(gm12u320->udev,
-				usb_rcvbulkpipe(gm12u320->udev, DATA_RCV_EPT),
-				gm12u320->cmd_buf, READ_STATUS_SIZE, &len,
-				CMD_TIMEOUT);
-			if (ret || len != READ_STATUS_SIZE)
-				goto err;
-		}
+	gm12u320_copy_fb_to_blocks(gm12u320);
+
+	for (block = 0; block < GM12U320_BLOCK_COUNT; block++) {
+		if (block == GM12U320_BLOCK_COUNT - 1)
+			block_size = DATA_LAST_BLOCK_SIZE;
+		else
+			block_size = DATA_BLOCK_SIZE;
+
+		/* Send data command to device */
+		memcpy(gm12u320->cmd_buf, cmd_data, CMD_SIZE);
+		gm12u320->cmd_buf[8] = block_size & 0xff;
+		gm12u320->cmd_buf[9] = block_size >> 8;
+		gm12u320->cmd_buf[20] = 0xfc - block * 4;
+		gm12u320->cmd_buf[21] =
+			block | (gm12u320->fb_update.frame << 7);
 
-		/* Send draw command to device */
-		memcpy(gm12u320->cmd_buf, cmd_draw, CMD_SIZE);
 		ret = usb_bulk_msg(gm12u320->udev,
 			usb_sndbulkpipe(gm12u320->udev, DATA_SND_EPT),
-			gm12u320->cmd_buf, CMD_SIZE, &len, CMD_TIMEOUT);
+			gm12u320->cmd_buf, CMD_SIZE, &len,
+			CMD_TIMEOUT);
 		if (ret || len != CMD_SIZE)
 			goto err;
 
+		/* Send data block to device */
+		ret = usb_bulk_msg(gm12u320->udev,
+			usb_sndbulkpipe(gm12u320->udev, DATA_SND_EPT),
+			gm12u320->data_buf[block], block_size,
+			&len, DATA_TIMEOUT);
+		if (ret || len != block_size)
+			goto err;
+
 		/* Read status */
 		ret = usb_bulk_msg(gm12u320->udev,
 			usb_rcvbulkpipe(gm12u320->udev, DATA_RCV_EPT),
 			gm12u320->cmd_buf, READ_STATUS_SIZE, &len,
-			draw_status_timeout);
+			CMD_TIMEOUT);
 		if (ret || len != READ_STATUS_SIZE)
 			goto err;
-
-		draw_status_timeout = CMD_TIMEOUT;
-		frame = !frame;
-
-		/*
-		 * We must draw a frame every 2s otherwise the projector
-		 * switches back to showing its logo.
-		 */
-		wait_event_timeout(gm12u320->fb_update.waitq,
-				   !gm12u320->fb_update.run ||
-					gm12u320->fb_update.fb != NULL,
-				   IDLE_TIMEOUT);
 	}
+
+	/* Send draw command to device */
+	memcpy(gm12u320->cmd_buf, cmd_draw, CMD_SIZE);
+	ret = usb_bulk_msg(gm12u320->udev,
+		usb_sndbulkpipe(gm12u320->udev, DATA_SND_EPT),
+		gm12u320->cmd_buf, CMD_SIZE, &len, CMD_TIMEOUT);
+	if (ret || len != CMD_SIZE)
+		goto err;
+
+	/* Read status */
+	ret = usb_bulk_msg(gm12u320->udev,
+		usb_rcvbulkpipe(gm12u320->udev, DATA_RCV_EPT),
+		gm12u320->cmd_buf, READ_STATUS_SIZE, &len,
+		gm12u320->fb_update.draw_status_timeout);
+	if (ret || len != READ_STATUS_SIZE)
+		goto err;
+
+	gm12u320->fb_update.draw_status_timeout = CMD_TIMEOUT;
+	gm12u320->fb_update.frame = !gm12u320->fb_update.frame;
+
+	/*
+	 * We must draw a frame every 2s otherwise the projector
+	 * switches back to showing its logo.
+	 */
+	queue_delayed_work(system_long_wq, &gm12u320->fb_update.work,
+			   IDLE_TIMEOUT);
+
 	return;
 err:
 	/* Do not log errors caused by module unload or device unplug */
@@ -428,7 +410,7 @@ static void gm12u320_fb_update_work(struct work_struct *work)
 static void gm12u320_fb_mark_dirty(struct drm_framebuffer *fb,
 				   struct drm_rect *dirty)
 {
-	struct gm12u320_device *gm12u320 = fb->dev->dev_private;
+	struct gm12u320_device *gm12u320 = to_gm12u320(fb->dev);
 	struct drm_framebuffer *old_fb = NULL;
 	bool wakeup = false;
 
@@ -452,36 +434,24 @@ static void gm12u320_fb_mark_dirty(struct drm_framebuffer *fb,
 	mutex_unlock(&gm12u320->fb_update.lock);
 
 	if (wakeup)
-		wake_up(&gm12u320->fb_update.waitq);
+		mod_delayed_work(system_long_wq, &gm12u320->fb_update.work, 0);
 
 	if (old_fb)
 		drm_framebuffer_put(old_fb);
 }
 
-static void gm12u320_start_fb_update(struct gm12u320_device *gm12u320)
-{
-	mutex_lock(&gm12u320->fb_update.lock);
-	gm12u320->fb_update.run = true;
-	mutex_unlock(&gm12u320->fb_update.lock);
-
-	queue_work(gm12u320->fb_update.workq, &gm12u320->fb_update.work);
-}
-
 static void gm12u320_stop_fb_update(struct gm12u320_device *gm12u320)
 {
-	mutex_lock(&gm12u320->fb_update.lock);
-	gm12u320->fb_update.run = false;
-	mutex_unlock(&gm12u320->fb_update.lock);
+	struct drm_framebuffer *old_fb;
 
-	wake_up(&gm12u320->fb_update.waitq);
-	cancel_work_sync(&gm12u320->fb_update.work);
+	cancel_delayed_work_sync(&gm12u320->fb_update.work);
 
 	mutex_lock(&gm12u320->fb_update.lock);
-	if (gm12u320->fb_update.fb) {
-		drm_framebuffer_put(gm12u320->fb_update.fb);
-		gm12u320->fb_update.fb = NULL;
-	}
+	old_fb = gm12u320->fb_update.fb;
+	gm12u320->fb_update.fb = NULL;
 	mutex_unlock(&gm12u320->fb_update.lock);
+
+	drm_framebuffer_put(old_fb);
 }
 
 static int gm12u320_set_ecomode(struct gm12u320_device *gm12u320)
@@ -589,20 +559,18 @@ static void gm12u320_pipe_enable(struct drm_simple_display_pipe *pipe,
 				 struct drm_crtc_state *crtc_state,
 				 struct drm_plane_state *plane_state)
 {
-	struct gm12u320_device *gm12u320 = pipe->crtc.dev->dev_private;
 	struct drm_rect rect = { 0, 0, GM12U320_USER_WIDTH, GM12U320_HEIGHT };
+	struct gm12u320_device *gm12u320 = to_gm12u320(pipe->crtc.dev);
 
+	gm12u320->fb_update.draw_status_timeout = FIRST_FRAME_TIMEOUT;
 	gm12u320_fb_mark_dirty(plane_state->fb, &rect);
-	gm12u320_start_fb_update(gm12u320);
-	gm12u320->pipe_enabled = true;
 }
 
 static void gm12u320_pipe_disable(struct drm_simple_display_pipe *pipe)
 {
-	struct gm12u320_device *gm12u320 = pipe->crtc.dev->dev_private;
+	struct gm12u320_device *gm12u320 = to_gm12u320(pipe->crtc.dev);
 
 	gm12u320_stop_fb_update(gm12u320);
-	gm12u320->pipe_enabled = false;
 }
 
 static void gm12u320_pipe_update(struct drm_simple_display_pipe *pipe,
@@ -630,16 +598,6 @@ static const uint64_t gm12u320_pipe_modifiers[] = {
 	DRM_FORMAT_MOD_INVALID
 };
 
-static void gm12u320_driver_release(struct drm_device *dev)
-{
-	struct gm12u320_device *gm12u320 = dev->dev_private;
-
-	gm12u320_usb_free(gm12u320);
-	drm_mode_config_cleanup(dev);
-	drm_dev_fini(dev);
-	kfree(gm12u320);
-}
-
 DEFINE_DRM_GEM_FOPS(gm12u320_fops);
 
 static struct drm_driver gm12u320_drm_driver = {
@@ -651,7 +609,6 @@ static struct drm_driver gm12u320_drm_driver = {
 	.major		 = DRIVER_MAJOR,
 	.minor		 = DRIVER_MINOR,
 
-	.release	 = gm12u320_driver_release,
 	.fops		 = &gm12u320_fops,
 	DRM_GEM_SHMEM_DRIVER_OPS,
 };
@@ -676,24 +633,21 @@ static int gm12u320_usb_probe(struct usb_interface *interface,
 	if (interface->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
-	gm12u320 = kzalloc(sizeof(*gm12u320), GFP_KERNEL);
-	if (gm12u320 == NULL)
-		return -ENOMEM;
+	gm12u320 = devm_drm_dev_alloc(&interface->dev, &gm12u320_drm_driver,
+				      struct gm12u320_device, dev);
+	if (IS_ERR(gm12u320))
+		return PTR_ERR(gm12u320);
 
 	gm12u320->udev = interface_to_usbdev(interface);
-	INIT_WORK(&gm12u320->fb_update.work, gm12u320_fb_update_work);
+	INIT_DELAYED_WORK(&gm12u320->fb_update.work, gm12u320_fb_update_work);
 	mutex_init(&gm12u320->fb_update.lock);
-	init_waitqueue_head(&gm12u320->fb_update.waitq);
 
 	dev = &gm12u320->dev;
-	ret = drm_dev_init(dev, &gm12u320_drm_driver, &interface->dev);
-	if (ret) {
-		kfree(gm12u320);
+
+	ret = drmm_mode_config_init(dev);
+	if (ret)
 		return ret;
-	}
-	dev->dev_private = gm12u320;
 
-	drm_mode_config_init(dev);
 	dev->mode_config.min_width = GM12U320_USER_WIDTH;
 	dev->mode_config.max_width = GM12U320_USER_WIDTH;
 	dev->mode_config.min_height = GM12U320_HEIGHT;
@@ -702,15 +656,15 @@ static int gm12u320_usb_probe(struct usb_interface *interface,
 
 	ret = gm12u320_usb_alloc(gm12u320);
 	if (ret)
-		goto err_put;
+		return ret;
 
 	ret = gm12u320_set_ecomode(gm12u320);
 	if (ret)
-		goto err_put;
+		return ret;
 
 	ret = gm12u320_conn_init(gm12u320);
 	if (ret)
-		goto err_put;
+		return ret;
 
 	ret = drm_simple_display_pipe_init(&gm12u320->dev,
 					   &gm12u320->pipe,
@@ -720,56 +674,44 @@ static int gm12u320_usb_probe(struct usb_interface *interface,
 					   gm12u320_pipe_modifiers,
 					   &gm12u320->conn);
 	if (ret)
-		goto err_put;
+		return ret;
 
 	drm_mode_config_reset(dev);
 
 	usb_set_intfdata(interface, dev);
 	ret = drm_dev_register(dev, 0);
 	if (ret)
-		goto err_put;
+		return ret;
 
 	drm_fbdev_generic_setup(dev, 0);
 
 	return 0;
-
-err_put:
-	drm_dev_put(dev);
-	return ret;
 }
 
 static void gm12u320_usb_disconnect(struct usb_interface *interface)
 {
 	struct drm_device *dev = usb_get_intfdata(interface);
-	struct gm12u320_device *gm12u320 = dev->dev_private;
 
-	gm12u320_stop_fb_update(gm12u320);
 	drm_dev_unplug(dev);
-	drm_dev_put(dev);
+	drm_atomic_helper_shutdown(dev);
 }
 
 static __maybe_unused int gm12u320_suspend(struct usb_interface *interface,
 					   pm_message_t message)
 {
 	struct drm_device *dev = usb_get_intfdata(interface);
-	struct gm12u320_device *gm12u320 = dev->dev_private;
 
-	if (gm12u320->pipe_enabled)
-		gm12u320_stop_fb_update(gm12u320);
-
-	return 0;
+	return drm_mode_config_helper_suspend(dev);
 }
 
 static __maybe_unused int gm12u320_resume(struct usb_interface *interface)
 {
 	struct drm_device *dev = usb_get_intfdata(interface);
-	struct gm12u320_device *gm12u320 = dev->dev_private;
+	struct gm12u320_device *gm12u320 = to_gm12u320(dev);
 
 	gm12u320_set_ecomode(gm12u320);
-	if (gm12u320->pipe_enabled)
-		gm12u320_start_fb_update(gm12u320);
 
-	return 0;
+	return drm_mode_config_helper_resume(dev);
 }
 
 static const struct usb_device_id id_table[] = {
diff --git a/drivers/gpu/drm/tiny/hx8357d.c b/drivers/gpu/drm/tiny/hx8357d.c
index 9af8ff84974f..b4bc358a3269 100644
--- a/drivers/gpu/drm/tiny/hx8357d.c
+++ b/drivers/gpu/drm/tiny/hx8357d.c
@@ -21,6 +21,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_mipi_dbi.h>
 #include <drm/drm_modeset_helper.h>
 #include <video/mipi_display.h>
@@ -195,7 +196,6 @@ DEFINE_DRM_GEM_CMA_FOPS(hx8357d_fops);
 static struct drm_driver hx8357d_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 	.fops			= &hx8357d_fops,
-	.release		= mipi_dbi_release,
 	DRM_GEM_CMA_VMAP_DRIVER_OPS,
 	.debugfs_init		= mipi_dbi_debugfs_init,
 	.name			= "hx8357d",
@@ -226,18 +226,12 @@ static int hx8357d_probe(struct spi_device *spi)
 	u32 rotation = 0;
 	int ret;
 
-	dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
-	if (!dbidev)
-		return -ENOMEM;
+	dbidev = devm_drm_dev_alloc(dev, &hx8357d_driver,
+				    struct mipi_dbi_dev, drm);
+	if (IS_ERR(dbidev))
+		return PTR_ERR(dbidev);
 
 	drm = &dbidev->drm;
-	ret = devm_drm_dev_init(dev, drm, &hx8357d_driver);
-	if (ret) {
-		kfree(dbidev);
-		return ret;
-	}
-
-	drm_mode_config_init(drm);
 
 	dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW);
 	if (IS_ERR(dc)) {
diff --git a/drivers/gpu/drm/tiny/ili9225.c b/drivers/gpu/drm/tiny/ili9225.c
index 802fb8dde1b6..d1a5ab6747d5 100644
--- a/drivers/gpu/drm/tiny/ili9225.c
+++ b/drivers/gpu/drm/tiny/ili9225.c
@@ -24,6 +24,7 @@
 #include <drm/drm_fourcc.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_mipi_dbi.h>
 #include <drm/drm_rect.h>
 
@@ -345,7 +346,6 @@ DEFINE_DRM_GEM_CMA_FOPS(ili9225_fops);
 static struct drm_driver ili9225_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 	.fops			= &ili9225_fops,
-	.release		= mipi_dbi_release,
 	DRM_GEM_CMA_VMAP_DRIVER_OPS,
 	.name			= "ili9225",
 	.desc			= "Ilitek ILI9225",
@@ -376,19 +376,13 @@ static int ili9225_probe(struct spi_device *spi)
 	u32 rotation = 0;
 	int ret;
 
-	dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
-	if (!dbidev)
-		return -ENOMEM;
+	dbidev = devm_drm_dev_alloc(dev, &ili9225_driver,
+				    struct mipi_dbi_dev, drm);
+	if (IS_ERR(dbidev))
+		return PTR_ERR(dbidev);
 
 	dbi = &dbidev->dbi;
 	drm = &dbidev->drm;
-	ret = devm_drm_dev_init(dev, drm, &ili9225_driver);
-	if (ret) {
-		kfree(dbidev);
-		return ret;
-	}
-
-	drm_mode_config_init(drm);
 
 	dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(dbi->reset)) {
diff --git a/drivers/gpu/drm/tiny/ili9341.c b/drivers/gpu/drm/tiny/ili9341.c
index 33b51dc7faa8..bb819f45a5d3 100644
--- a/drivers/gpu/drm/tiny/ili9341.c
+++ b/drivers/gpu/drm/tiny/ili9341.c
@@ -20,6 +20,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_mipi_dbi.h>
 #include <drm/drm_modeset_helper.h>
 #include <video/mipi_display.h>
@@ -151,7 +152,6 @@ DEFINE_DRM_GEM_CMA_FOPS(ili9341_fops);
 static struct drm_driver ili9341_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 	.fops			= &ili9341_fops,
-	.release		= mipi_dbi_release,
 	DRM_GEM_CMA_VMAP_DRIVER_OPS,
 	.debugfs_init		= mipi_dbi_debugfs_init,
 	.name			= "ili9341",
@@ -183,19 +183,13 @@ static int ili9341_probe(struct spi_device *spi)
 	u32 rotation = 0;
 	int ret;
 
-	dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
-	if (!dbidev)
-		return -ENOMEM;
+	dbidev = devm_drm_dev_alloc(dev, &ili9341_driver,
+				    struct mipi_dbi_dev, drm);
+	if (IS_ERR(dbidev))
+		return PTR_ERR(dbidev);
 
 	dbi = &dbidev->dbi;
 	drm = &dbidev->drm;
-	ret = devm_drm_dev_init(dev, drm, &ili9341_driver);
-	if (ret) {
-		kfree(dbidev);
-		return ret;
-	}
-
-	drm_mode_config_init(drm);
 
 	dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(dbi->reset)) {
diff --git a/drivers/gpu/drm/tiny/ili9486.c b/drivers/gpu/drm/tiny/ili9486.c
index 532560aebb1e..2702ea557d29 100644
--- a/drivers/gpu/drm/tiny/ili9486.c
+++ b/drivers/gpu/drm/tiny/ili9486.c
@@ -19,6 +19,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_mipi_dbi.h>
 #include <drm/drm_modeset_helper.h>
 
@@ -164,7 +165,6 @@ DEFINE_DRM_GEM_CMA_FOPS(ili9486_fops);
 static struct drm_driver ili9486_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 	.fops			= &ili9486_fops,
-	.release		= mipi_dbi_release,
 	DRM_GEM_CMA_VMAP_DRIVER_OPS,
 	.debugfs_init		= mipi_dbi_debugfs_init,
 	.name			= "ili9486",
@@ -197,19 +197,13 @@ static int ili9486_probe(struct spi_device *spi)
 	u32 rotation = 0;
 	int ret;
 
-	dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
-	if (!dbidev)
-		return -ENOMEM;
+	dbidev = devm_drm_dev_alloc(dev, &ili9486_driver,
+				    struct mipi_dbi_dev, drm);
+	if (IS_ERR(dbidev))
+		return PTR_ERR(dbidev);
 
 	dbi = &dbidev->dbi;
 	drm = &dbidev->drm;
-	ret = devm_drm_dev_init(dev, drm, &ili9486_driver);
-	if (ret) {
-		kfree(dbidev);
-		return ret;
-	}
-
-	drm_mode_config_init(drm);
 
 	dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(dbi->reset)) {
diff --git a/drivers/gpu/drm/tiny/mi0283qt.c b/drivers/gpu/drm/tiny/mi0283qt.c
index e2cfd9a17143..08ac549ab0f7 100644
--- a/drivers/gpu/drm/tiny/mi0283qt.c
+++ b/drivers/gpu/drm/tiny/mi0283qt.c
@@ -18,6 +18,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_mipi_dbi.h>
 #include <drm/drm_modeset_helper.h>
 #include <video/mipi_display.h>
@@ -155,7 +156,6 @@ DEFINE_DRM_GEM_CMA_FOPS(mi0283qt_fops);
 static struct drm_driver mi0283qt_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 	.fops			= &mi0283qt_fops,
-	.release		= mipi_dbi_release,
 	DRM_GEM_CMA_VMAP_DRIVER_OPS,
 	.debugfs_init		= mipi_dbi_debugfs_init,
 	.name			= "mi0283qt",
@@ -187,19 +187,13 @@ static int mi0283qt_probe(struct spi_device *spi)
 	u32 rotation = 0;
 	int ret;
 
-	dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
-	if (!dbidev)
-		return -ENOMEM;
+	dbidev = devm_drm_dev_alloc(dev, &mi0283qt_driver,
+				    struct mipi_dbi_dev, drm);
+	if (IS_ERR(dbidev))
+		return PTR_ERR(dbidev);
 
 	dbi = &dbidev->dbi;
 	drm = &dbidev->drm;
-	ret = devm_drm_dev_init(dev, drm, &mi0283qt_driver);
-	if (ret) {
-		kfree(dbidev);
-		return ret;
-	}
-
-	drm_mode_config_init(drm);
 
 	dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(dbi->reset)) {
diff --git a/drivers/gpu/drm/tiny/repaper.c b/drivers/gpu/drm/tiny/repaper.c
index f5ebcaf7ee3a..1c0e7169545b 100644
--- a/drivers/gpu/drm/tiny/repaper.c
+++ b/drivers/gpu/drm/tiny/repaper.c
@@ -31,6 +31,7 @@
 #include <drm/drm_format_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_rect.h>
 #include <drm/drm_probe_helper.h>
@@ -908,17 +909,6 @@ static const struct drm_mode_config_funcs repaper_mode_config_funcs = {
 	.atomic_commit = drm_atomic_helper_commit,
 };
 
-static void repaper_release(struct drm_device *drm)
-{
-	struct repaper_epd *epd = drm_to_epd(drm);
-
-	DRM_DEBUG_DRIVER("\n");
-
-	drm_mode_config_cleanup(drm);
-	drm_dev_fini(drm);
-	kfree(epd);
-}
-
 static const uint32_t repaper_formats[] = {
 	DRM_FORMAT_XRGB8888,
 };
@@ -956,7 +946,6 @@ DEFINE_DRM_GEM_CMA_FOPS(repaper_fops);
 static struct drm_driver repaper_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 	.fops			= &repaper_fops,
-	.release		= repaper_release,
 	DRM_GEM_CMA_VMAP_DRIVER_OPS,
 	.name			= "repaper",
 	.desc			= "Pervasive Displays RePaper e-ink panels",
@@ -1013,19 +1002,16 @@ static int repaper_probe(struct spi_device *spi)
 		}
 	}
 
-	epd = kzalloc(sizeof(*epd), GFP_KERNEL);
-	if (!epd)
-		return -ENOMEM;
+	epd = devm_drm_dev_alloc(dev, &repaper_driver,
+				 struct repaper_epd, drm);
+	if (IS_ERR(epd))
+		return PTR_ERR(epd);
 
 	drm = &epd->drm;
 
-	ret = devm_drm_dev_init(dev, drm, &repaper_driver);
-	if (ret) {
-		kfree(epd);
+	ret = drmm_mode_config_init(drm);
+	if (ret)
 		return ret;
-	}
-
-	drm_mode_config_init(drm);
 	drm->mode_config.funcs = &repaper_mode_config_funcs;
 
 	epd->spi = spi;
diff --git a/drivers/gpu/drm/tiny/st7586.c b/drivers/gpu/drm/tiny/st7586.c
index 9ef559dd3191..2a1fae422f7a 100644
--- a/drivers/gpu/drm/tiny/st7586.c
+++ b/drivers/gpu/drm/tiny/st7586.c
@@ -21,6 +21,7 @@
 #include <drm/drm_format_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_mipi_dbi.h>
 #include <drm/drm_rect.h>
 
@@ -284,7 +285,6 @@ DEFINE_DRM_GEM_CMA_FOPS(st7586_fops);
 static struct drm_driver st7586_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 	.fops			= &st7586_fops,
-	.release		= mipi_dbi_release,
 	DRM_GEM_CMA_VMAP_DRIVER_OPS,
 	.debugfs_init		= mipi_dbi_debugfs_init,
 	.name			= "st7586",
@@ -317,19 +317,13 @@ static int st7586_probe(struct spi_device *spi)
 	size_t bufsize;
 	int ret;
 
-	dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
-	if (!dbidev)
-		return -ENOMEM;
+	dbidev = devm_drm_dev_alloc(dev, &st7586_driver,
+				    struct mipi_dbi_dev, drm);
+	if (IS_ERR(dbidev))
+		return PTR_ERR(dbidev);
 
 	dbi = &dbidev->dbi;
 	drm = &dbidev->drm;
-	ret = devm_drm_dev_init(dev, drm, &st7586_driver);
-	if (ret) {
-		kfree(dbidev);
-		return ret;
-	}
-
-	drm_mode_config_init(drm);
 
 	bufsize = (st7586_mode.vdisplay + 2) / 3 * st7586_mode.hdisplay;
 
diff --git a/drivers/gpu/drm/tiny/st7735r.c b/drivers/gpu/drm/tiny/st7735r.c
index 3cd9b8d9888d..0af1b15efdf8 100644
--- a/drivers/gpu/drm/tiny/st7735r.c
+++ b/drivers/gpu/drm/tiny/st7735r.c
@@ -21,6 +21,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_mipi_dbi.h>
 
 #define ST7735R_FRMCTR1		0xb1
@@ -156,7 +157,6 @@ DEFINE_DRM_GEM_CMA_FOPS(st7735r_fops);
 static struct drm_driver st7735r_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 	.fops			= &st7735r_fops,
-	.release		= mipi_dbi_release,
 	DRM_GEM_CMA_VMAP_DRIVER_OPS,
 	.debugfs_init		= mipi_dbi_debugfs_init,
 	.name			= "st7735r",
@@ -195,22 +195,16 @@ static int st7735r_probe(struct spi_device *spi)
 	if (!cfg)
 		cfg = (void *)spi_get_device_id(spi)->driver_data;
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
+	priv = devm_drm_dev_alloc(dev, &st7735r_driver,
+				  struct st7735r_priv, dbidev.drm);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
 
 	dbidev = &priv->dbidev;
 	priv->cfg = cfg;
 
 	dbi = &dbidev->dbi;
 	drm = &dbidev->drm;
-	ret = devm_drm_dev_init(dev, drm, &st7735r_driver);
-	if (ret) {
-		kfree(dbidev);
-		return ret;
-	}
-
-	drm_mode_config_init(drm);
 
 	dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(dbi->reset)) {
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 9e07c3f75156..46d0d068cd65 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -518,7 +518,7 @@ static bool ttm_bo_delayed_delete(struct ttm_bo_device *bdev, bool remove_all)
 	INIT_LIST_HEAD(&removed);
 
 	spin_lock(&glob->lru_lock);
-	while (!list_empty(&bdev->ddestroy)) {
+	while (!list_empty(&bdev->ddestroy) && !need_resched()) {
 		struct ttm_buffer_object *bo;
 
 		bo = list_first_entry(&bdev->ddestroy, struct ttm_buffer_object,
@@ -588,7 +588,8 @@ static void ttm_bo_release(struct kref *kref)
 		ttm_mem_io_unlock(man);
 	}
 
-	if (!dma_resv_test_signaled_rcu(bo->base.resv, true)) {
+	if (!dma_resv_test_signaled_rcu(bo->base.resv, true) ||
+	    !dma_resv_trylock(bo->base.resv)) {
 		/* The BO is not idle, resurrect it for delayed destroy */
 		ttm_bo_flush_all_fences(bo);
 		bo->deleted = true;
@@ -621,6 +622,7 @@ static void ttm_bo_release(struct kref *kref)
 	spin_unlock(&ttm_bo_glob.lru_lock);
 
 	ttm_bo_cleanup_memtype_use(bo);
+	dma_resv_unlock(bo->base.resv);
 
 	BUG_ON(bo->mem.mm_node != NULL);
 	atomic_dec(&ttm_bo_glob.bo_count);
diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c
index 0afdfb0d1fe1..cdc1c42e1669 100644
--- a/drivers/gpu/drm/udl/udl_connector.c
+++ b/drivers/gpu/drm/udl/udl_connector.c
@@ -59,7 +59,7 @@ static int udl_get_modes(struct drm_connector *connector)
 static enum drm_mode_status udl_mode_valid(struct drm_connector *connector,
 			  struct drm_display_mode *mode)
 {
-	struct udl_device *udl = connector->dev->dev_private;
+	struct udl_device *udl = to_udl(connector->dev);
 	if (!udl->sku_pixel_limit)
 		return 0;
 
@@ -72,7 +72,7 @@ static enum drm_mode_status udl_mode_valid(struct drm_connector *connector,
 static enum drm_connector_status
 udl_detect(struct drm_connector *connector, bool force)
 {
-	struct udl_device *udl = connector->dev->dev_private;
+	struct udl_device *udl = to_udl(connector->dev);
 	struct udl_drm_connector *udl_connector =
 					container_of(connector,
 					struct udl_drm_connector,
diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
index e6c1cd77d4d4..d1aa50fd6d65 100644
--- a/drivers/gpu/drm/udl/udl_drv.c
+++ b/drivers/gpu/drm/udl/udl_drv.c
@@ -10,6 +10,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_file.h>
 #include <drm/drm_gem_shmem_helper.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_ioctl.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_print.h>
@@ -33,17 +34,8 @@ static int udl_usb_resume(struct usb_interface *interface)
 
 DEFINE_DRM_GEM_FOPS(udl_driver_fops);
 
-static void udl_driver_release(struct drm_device *dev)
-{
-	udl_fini(dev);
-	udl_modeset_cleanup(dev);
-	drm_dev_fini(dev);
-	kfree(dev);
-}
-
 static struct drm_driver driver = {
 	.driver_features = DRIVER_ATOMIC | DRIVER_GEM | DRIVER_MODESET,
-	.release = udl_driver_release,
 
 	/* gem hooks */
 	.gem_create_object = udl_driver_gem_create_object,
@@ -65,27 +57,19 @@ static struct udl_device *udl_driver_create(struct usb_interface *interface)
 	struct udl_device *udl;
 	int r;
 
-	udl = kzalloc(sizeof(*udl), GFP_KERNEL);
-	if (!udl)
-		return ERR_PTR(-ENOMEM);
-
-	r = drm_dev_init(&udl->drm, &driver, &interface->dev);
-	if (r) {
-		kfree(udl);
-		return ERR_PTR(r);
-	}
+	udl = devm_drm_dev_alloc(&interface->dev, &driver,
+				 struct udl_device, drm);
+	if (IS_ERR(udl))
+		return udl;
 
 	udl->udev = udev;
-	udl->drm.dev_private = udl;
 
 	r = udl_init(udl);
-	if (r) {
-		drm_dev_fini(&udl->drm);
-		kfree(udl);
+	if (r)
 		return ERR_PTR(r);
-	}
 
 	usb_set_intfdata(interface, udl);
+
 	return udl;
 }
 
@@ -101,31 +85,22 @@ static int udl_usb_probe(struct usb_interface *interface,
 
 	r = drm_dev_register(&udl->drm, 0);
 	if (r)
-		goto err_free;
+		return r;
 
 	DRM_INFO("Initialized udl on minor %d\n", udl->drm.primary->index);
 
-	r = drm_fbdev_generic_setup(&udl->drm, 0);
-	if (r)
-		goto err_drm_dev_unregister;
+	drm_fbdev_generic_setup(&udl->drm, 0);
 
 	return 0;
-
-err_drm_dev_unregister:
-	drm_dev_unregister(&udl->drm);
-err_free:
-	drm_dev_put(&udl->drm);
-	return r;
 }
 
 static void udl_usb_disconnect(struct usb_interface *interface)
 {
 	struct drm_device *dev = usb_get_intfdata(interface);
 
-	drm_kms_helper_poll_disable(dev);
+	drm_kms_helper_poll_fini(dev);
 	udl_drop_usb(dev);
 	drm_dev_unplug(dev);
-	drm_dev_put(dev);
 }
 
 /*
diff --git a/drivers/gpu/drm/udl/udl_drv.h b/drivers/gpu/drm/udl/udl_drv.h
index e67227c44cc4..2642f94a63fc 100644
--- a/drivers/gpu/drm/udl/udl_drv.h
+++ b/drivers/gpu/drm/udl/udl_drv.h
@@ -68,7 +68,6 @@ struct udl_device {
 
 /* modeset */
 int udl_modeset_init(struct drm_device *dev);
-void udl_modeset_cleanup(struct drm_device *dev);
 struct drm_connector *udl_connector_init(struct drm_device *dev);
 
 struct urb *udl_get_urb(struct drm_device *dev);
@@ -77,7 +76,6 @@ int udl_submit_urb(struct drm_device *dev, struct urb *urb, size_t len);
 void udl_urb_completion(struct urb *urb);
 
 int udl_init(struct udl_device *udl);
-void udl_fini(struct drm_device *dev);
 
 int udl_render_hline(struct drm_device *dev, int log_bpp, struct urb **urb_ptr,
 		     const char *front, char **urb_buf_ptr,
diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c
index 538718919916..f5d27f2a5654 100644
--- a/drivers/gpu/drm/udl/udl_main.c
+++ b/drivers/gpu/drm/udl/udl_main.c
@@ -351,13 +351,3 @@ int udl_drop_usb(struct drm_device *dev)
 	udl_free_urb_list(dev);
 	return 0;
 }
-
-void udl_fini(struct drm_device *dev)
-{
-	struct udl_device *udl = to_udl(dev);
-
-	drm_kms_helper_poll_fini(dev);
-
-	if (udl->urbs.count)
-		udl_free_urb_list(dev);
-}
diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c
index d59ebac70b15..99518a826435 100644
--- a/drivers/gpu/drm/udl/udl_modeset.c
+++ b/drivers/gpu/drm/udl/udl_modeset.c
@@ -215,7 +215,7 @@ static char *udl_dummy_render(char *wrptr)
 static int udl_crtc_write_mode_to_hw(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
-	struct udl_device *udl = dev->dev_private;
+	struct udl_device *udl = to_udl(dev);
 	struct urb *urb;
 	char *buf;
 	int retval;
@@ -369,7 +369,7 @@ udl_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 	struct drm_crtc *crtc = &pipe->crtc;
 	struct drm_device *dev = crtc->dev;
 	struct drm_framebuffer *fb = plane_state->fb;
-	struct udl_device *udl = dev->dev_private;
+	struct udl_device *udl = to_udl(dev);
 	struct drm_display_mode *mode = &crtc_state->mode;
 	char *buf;
 	char *wrptr;
@@ -464,11 +464,13 @@ static const struct drm_mode_config_funcs udl_mode_funcs = {
 int udl_modeset_init(struct drm_device *dev)
 {
 	size_t format_count = ARRAY_SIZE(udl_simple_display_pipe_formats);
-	struct udl_device *udl = dev->dev_private;
+	struct udl_device *udl = to_udl(dev);
 	struct drm_connector *connector;
 	int ret;
 
-	drm_mode_config_init(dev);
+	ret = drmm_mode_config_init(dev);
+	if (ret)
+		return ret;
 
 	dev->mode_config.min_width = 640;
 	dev->mode_config.min_height = 480;
@@ -482,10 +484,8 @@ int udl_modeset_init(struct drm_device *dev)
 	dev->mode_config.funcs = &udl_mode_funcs;
 
 	connector = udl_connector_init(dev);
-	if (IS_ERR(connector)) {
-		ret = PTR_ERR(connector);
-		goto err_drm_mode_config_cleanup;
-	}
+	if (IS_ERR(connector))
+		return PTR_ERR(connector);
 
 	format_count = ARRAY_SIZE(udl_simple_display_pipe_formats);
 
@@ -494,18 +494,9 @@ int udl_modeset_init(struct drm_device *dev)
 					   udl_simple_display_pipe_formats,
 					   format_count, NULL, connector);
 	if (ret)
-		goto err_drm_mode_config_cleanup;
+		return ret;
 
 	drm_mode_config_reset(dev);
 
 	return 0;
-
-err_drm_mode_config_cleanup:
-	drm_mode_config_cleanup(dev);
-	return ret;
-}
-
-void udl_modeset_cleanup(struct drm_device *dev)
-{
-	drm_mode_config_cleanup(dev);
 }
diff --git a/drivers/gpu/drm/v3d/v3d_debugfs.c b/drivers/gpu/drm/v3d/v3d_debugfs.c
index 9e953ce64ef7..e76b24bb8828 100644
--- a/drivers/gpu/drm/v3d/v3d_debugfs.c
+++ b/drivers/gpu/drm/v3d/v3d_debugfs.c
@@ -132,7 +132,7 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
 	u32 ident0, ident1, ident2, ident3, cores;
 	int ret, core;
 
-	ret = pm_runtime_get_sync(v3d->dev);
+	ret = pm_runtime_get_sync(v3d->drm.dev);
 	if (ret < 0)
 		return ret;
 
@@ -187,8 +187,8 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
 			   (misccfg & V3D_MISCCFG_OVRTMUOUT) != 0);
 	}
 
-	pm_runtime_mark_last_busy(v3d->dev);
-	pm_runtime_put_autosuspend(v3d->dev);
+	pm_runtime_mark_last_busy(v3d->drm.dev);
+	pm_runtime_put_autosuspend(v3d->drm.dev);
 
 	return 0;
 }
@@ -219,7 +219,7 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
 	int measure_ms = 1000;
 	int ret;
 
-	ret = pm_runtime_get_sync(v3d->dev);
+	ret = pm_runtime_get_sync(v3d->drm.dev);
 	if (ret < 0)
 		return ret;
 
@@ -245,8 +245,8 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
 		   cycles / (measure_ms * 1000),
 		   (cycles / (measure_ms * 100)) % 10);
 
-	pm_runtime_mark_last_busy(v3d->dev);
-	pm_runtime_put_autosuspend(v3d->dev);
+	pm_runtime_mark_last_busy(v3d->drm.dev);
+	pm_runtime_put_autosuspend(v3d->drm.dev);
 
 	return 0;
 }
@@ -258,10 +258,10 @@ static const struct drm_info_list v3d_debugfs_list[] = {
 	{"bo_stats", v3d_debugfs_bo_stats, 0},
 };
 
-int
+void
 v3d_debugfs_init(struct drm_minor *minor)
 {
-	return drm_debugfs_create_files(v3d_debugfs_list,
-					ARRAY_SIZE(v3d_debugfs_list),
-					minor->debugfs_root, minor);
+	drm_debugfs_create_files(v3d_debugfs_list,
+				 ARRAY_SIZE(v3d_debugfs_list),
+				 minor->debugfs_root, minor);
 }
diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c
index eaa8e9682373..82a7dfdd14c2 100644
--- a/drivers/gpu/drm/v3d/v3d_drv.c
+++ b/drivers/gpu/drm/v3d/v3d_drv.c
@@ -25,6 +25,7 @@
 #include <drm/drm_drv.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_fb_helper.h>
+#include <drm/drm_managed.h>
 #include <uapi/drm/v3d_drm.h>
 
 #include "v3d_drv.h"
@@ -104,7 +105,7 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
 		if (args->value != 0)
 			return -EINVAL;
 
-		ret = pm_runtime_get_sync(v3d->dev);
+		ret = pm_runtime_get_sync(v3d->drm.dev);
 		if (ret < 0)
 			return ret;
 		if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 &&
@@ -113,8 +114,8 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
 		} else {
 			args->value = V3D_READ(offset);
 		}
-		pm_runtime_mark_last_busy(v3d->dev);
-		pm_runtime_put_autosuspend(v3d->dev);
+		pm_runtime_mark_last_busy(v3d->drm.dev);
+		pm_runtime_put_autosuspend(v3d->drm.dev);
 		return 0;
 	}
 
@@ -234,9 +235,9 @@ static int
 map_regs(struct v3d_dev *v3d, void __iomem **regs, const char *name)
 {
 	struct resource *res =
-		platform_get_resource_byname(v3d->pdev, IORESOURCE_MEM, name);
+		platform_get_resource_byname(v3d_to_pdev(v3d), IORESOURCE_MEM, name);
 
-	*regs = devm_ioremap_resource(v3d->dev, res);
+	*regs = devm_ioremap_resource(v3d->drm.dev, res);
 	return PTR_ERR_OR_ZERO(*regs);
 }
 
@@ -250,20 +251,21 @@ static int v3d_platform_drm_probe(struct platform_device *pdev)
 	u32 ident1;
 
 
-	v3d = kzalloc(sizeof(*v3d), GFP_KERNEL);
-	if (!v3d)
-		return -ENOMEM;
-	v3d->dev = dev;
-	v3d->pdev = pdev;
+	v3d = devm_drm_dev_alloc(dev, &v3d_drm_driver, struct v3d_dev, drm);
+	if (IS_ERR(v3d))
+		return PTR_ERR(v3d);
+
 	drm = &v3d->drm;
 
+	platform_set_drvdata(pdev, drm);
+
 	ret = map_regs(v3d, &v3d->hub_regs, "hub");
 	if (ret)
-		goto dev_free;
+		return ret;
 
 	ret = map_regs(v3d, &v3d->core_regs[0], "core0");
 	if (ret)
-		goto dev_free;
+		return ret;
 
 	mmu_debug = V3D_READ(V3D_MMU_DEBUG_INFO);
 	dev->coherent_dma_mask =
@@ -281,45 +283,37 @@ static int v3d_platform_drm_probe(struct platform_device *pdev)
 		ret = PTR_ERR(v3d->reset);
 
 		if (ret == -EPROBE_DEFER)
-			goto dev_free;
+			return ret;
 
 		v3d->reset = NULL;
 		ret = map_regs(v3d, &v3d->bridge_regs, "bridge");
 		if (ret) {
 			dev_err(dev,
 				"Failed to get reset control or bridge regs\n");
-			goto dev_free;
+			return ret;
 		}
 	}
 
 	if (v3d->ver < 41) {
 		ret = map_regs(v3d, &v3d->gca_regs, "gca");
 		if (ret)
-			goto dev_free;
+			return ret;
 	}
 
 	v3d->mmu_scratch = dma_alloc_wc(dev, 4096, &v3d->mmu_scratch_paddr,
 					GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO);
 	if (!v3d->mmu_scratch) {
 		dev_err(dev, "Failed to allocate MMU scratch page\n");
-		ret = -ENOMEM;
-		goto dev_free;
+		return -ENOMEM;
 	}
 
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_set_autosuspend_delay(dev, 50);
 	pm_runtime_enable(dev);
 
-	ret = drm_dev_init(&v3d->drm, &v3d_drm_driver, dev);
-	if (ret)
-		goto dma_free;
-
-	platform_set_drvdata(pdev, drm);
-	drm->dev_private = v3d;
-
 	ret = v3d_gem_init(drm);
 	if (ret)
-		goto dev_destroy;
+		goto dma_free;
 
 	ret = v3d_irq_init(v3d);
 	if (ret)
@@ -335,12 +329,8 @@ static int v3d_platform_drm_probe(struct platform_device *pdev)
 	v3d_irq_disable(v3d);
 gem_destroy:
 	v3d_gem_destroy(drm);
-dev_destroy:
-	drm_dev_put(drm);
 dma_free:
 	dma_free_wc(dev, 4096, v3d->mmu_scratch, v3d->mmu_scratch_paddr);
-dev_free:
-	kfree(v3d);
 	return ret;
 }
 
@@ -353,9 +343,8 @@ static int v3d_platform_drm_remove(struct platform_device *pdev)
 
 	v3d_gem_destroy(drm);
 
-	drm_dev_put(drm);
-
-	dma_free_wc(v3d->dev, 4096, v3d->mmu_scratch, v3d->mmu_scratch_paddr);
+	dma_free_wc(v3d->drm.dev, 4096, v3d->mmu_scratch,
+		    v3d->mmu_scratch_paddr);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/v3d/v3d_drv.h b/drivers/gpu/drm/v3d/v3d_drv.h
index ac2603334587..8a390738d65b 100644
--- a/drivers/gpu/drm/v3d/v3d_drv.h
+++ b/drivers/gpu/drm/v3d/v3d_drv.h
@@ -14,7 +14,6 @@
 #include "uapi/drm/v3d_drm.h"
 
 struct clk;
-struct device;
 struct platform_device;
 struct reset_control;
 
@@ -47,8 +46,6 @@ struct v3d_dev {
 	int ver;
 	bool single_irq_line;
 
-	struct device *dev;
-	struct platform_device *pdev;
 	void __iomem *hub_regs;
 	void __iomem *core_regs[3];
 	void __iomem *bridge_regs;
@@ -121,7 +118,7 @@ struct v3d_dev {
 static inline struct v3d_dev *
 to_v3d_dev(struct drm_device *dev)
 {
-	return (struct v3d_dev *)dev->dev_private;
+	return container_of(dev, struct v3d_dev, drm);
 }
 
 static inline bool
@@ -130,6 +127,8 @@ v3d_has_csd(struct v3d_dev *v3d)
 	return v3d->ver >= 41;
 }
 
+#define v3d_to_pdev(v3d) to_platform_device((v3d)->drm.dev)
+
 /* The per-fd struct, which tracks the MMU mappings. */
 struct v3d_file_priv {
 	struct v3d_dev *v3d;
@@ -316,7 +315,7 @@ struct drm_gem_object *v3d_prime_import_sg_table(struct drm_device *dev,
 						 struct sg_table *sgt);
 
 /* v3d_debugfs.c */
-int v3d_debugfs_init(struct drm_minor *minor);
+void v3d_debugfs_init(struct drm_minor *minor);
 
 /* v3d_fence.c */
 extern const struct dma_fence_ops v3d_fence_ops;
diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
index 549dde83408b..09a7639cf161 100644
--- a/drivers/gpu/drm/v3d/v3d_gem.c
+++ b/drivers/gpu/drm/v3d/v3d_gem.c
@@ -370,8 +370,8 @@ v3d_job_free(struct kref *ref)
 	dma_fence_put(job->irq_fence);
 	dma_fence_put(job->done_fence);
 
-	pm_runtime_mark_last_busy(job->v3d->dev);
-	pm_runtime_put_autosuspend(job->v3d->dev);
+	pm_runtime_mark_last_busy(job->v3d->drm.dev);
+	pm_runtime_put_autosuspend(job->v3d->drm.dev);
 
 	kfree(job);
 }
@@ -439,7 +439,7 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
 	job->v3d = v3d;
 	job->free = free;
 
-	ret = pm_runtime_get_sync(v3d->dev);
+	ret = pm_runtime_get_sync(v3d->drm.dev);
 	if (ret < 0)
 		return ret;
 
@@ -458,7 +458,7 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
 	return 0;
 fail:
 	xa_destroy(&job->deps);
-	pm_runtime_put_autosuspend(v3d->dev);
+	pm_runtime_put_autosuspend(v3d->drm.dev);
 	return ret;
 }
 
@@ -886,12 +886,12 @@ v3d_gem_init(struct drm_device *dev)
 	 */
 	drm_mm_init(&v3d->mm, 1, pt_size / sizeof(u32) - 1);
 
-	v3d->pt = dma_alloc_wc(v3d->dev, pt_size,
+	v3d->pt = dma_alloc_wc(v3d->drm.dev, pt_size,
 			       &v3d->pt_paddr,
 			       GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO);
 	if (!v3d->pt) {
 		drm_mm_takedown(&v3d->mm);
-		dev_err(v3d->dev,
+		dev_err(v3d->drm.dev,
 			"Failed to allocate page tables. "
 			"Please ensure you have CMA enabled.\n");
 		return -ENOMEM;
@@ -903,7 +903,7 @@ v3d_gem_init(struct drm_device *dev)
 	ret = v3d_sched_init(v3d);
 	if (ret) {
 		drm_mm_takedown(&v3d->mm);
-		dma_free_coherent(v3d->dev, 4096 * 1024, (void *)v3d->pt,
+		dma_free_coherent(v3d->drm.dev, 4096 * 1024, (void *)v3d->pt,
 				  v3d->pt_paddr);
 	}
 
@@ -925,5 +925,6 @@ v3d_gem_destroy(struct drm_device *dev)
 
 	drm_mm_takedown(&v3d->mm);
 
-	dma_free_coherent(v3d->dev, 4096 * 1024, (void *)v3d->pt, v3d->pt_paddr);
+	dma_free_coherent(v3d->drm.dev, 4096 * 1024, (void *)v3d->pt,
+			  v3d->pt_paddr);
 }
diff --git a/drivers/gpu/drm/v3d/v3d_irq.c b/drivers/gpu/drm/v3d/v3d_irq.c
index 662e67279a7b..51b65263c657 100644
--- a/drivers/gpu/drm/v3d/v3d_irq.c
+++ b/drivers/gpu/drm/v3d/v3d_irq.c
@@ -128,7 +128,7 @@ v3d_irq(int irq, void *arg)
 	 * always-allowed mode.
 	 */
 	if (intsts & V3D_INT_GMPV)
-		dev_err(v3d->dev, "GMP violation\n");
+		dev_err(v3d->drm.dev, "GMP violation\n");
 
 	/* V3D 4.2 wires the hub and core IRQs together, so if we &
 	 * didn't see the common one then check hub for MMU IRQs.
@@ -189,7 +189,7 @@ v3d_hub_irq(int irq, void *arg)
 				client = v3d41_axi_ids[axi_id];
 		}
 
-		dev_err(v3d->dev, "MMU error from client %s (%d) at 0x%llx%s%s%s\n",
+		dev_err(v3d->drm.dev, "MMU error from client %s (%d) at 0x%llx%s%s%s\n",
 			client, axi_id, (long long)vio_addr,
 			((intsts & V3D_HUB_INT_MMU_WRV) ?
 			 ", write violation" : ""),
@@ -217,16 +217,17 @@ v3d_irq_init(struct v3d_dev *v3d)
 		V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS);
 	V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS);
 
-	irq1 = platform_get_irq(v3d->pdev, 1);
+	irq1 = platform_get_irq(v3d_to_pdev(v3d), 1);
 	if (irq1 == -EPROBE_DEFER)
 		return irq1;
 	if (irq1 > 0) {
-		ret = devm_request_irq(v3d->dev, irq1,
+		ret = devm_request_irq(v3d->drm.dev, irq1,
 				       v3d_irq, IRQF_SHARED,
 				       "v3d_core0", v3d);
 		if (ret)
 			goto fail;
-		ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0),
+		ret = devm_request_irq(v3d->drm.dev,
+				       platform_get_irq(v3d_to_pdev(v3d), 0),
 				       v3d_hub_irq, IRQF_SHARED,
 				       "v3d_hub", v3d);
 		if (ret)
@@ -234,7 +235,8 @@ v3d_irq_init(struct v3d_dev *v3d)
 	} else {
 		v3d->single_irq_line = true;
 
-		ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0),
+		ret = devm_request_irq(v3d->drm.dev,
+				       platform_get_irq(v3d_to_pdev(v3d), 0),
 				       v3d_irq, IRQF_SHARED,
 				       "v3d", v3d);
 		if (ret)
@@ -246,7 +248,7 @@ v3d_irq_init(struct v3d_dev *v3d)
 
 fail:
 	if (ret != -EPROBE_DEFER)
-		dev_err(v3d->dev, "IRQ setup failed: %d\n", ret);
+		dev_err(v3d->drm.dev, "IRQ setup failed: %d\n", ret);
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/v3d/v3d_mmu.c b/drivers/gpu/drm/v3d/v3d_mmu.c
index 395e81d97163..3b81ea28c0bb 100644
--- a/drivers/gpu/drm/v3d/v3d_mmu.c
+++ b/drivers/gpu/drm/v3d/v3d_mmu.c
@@ -40,7 +40,7 @@ static int v3d_mmu_flush_all(struct v3d_dev *v3d)
 	ret = wait_for(!(V3D_READ(V3D_MMU_CTL) &
 			 V3D_MMU_CTL_TLB_CLEARING), 100);
 	if (ret)
-		dev_err(v3d->dev, "TLB clear wait idle pre-wait failed\n");
+		dev_err(v3d->drm.dev, "TLB clear wait idle pre-wait failed\n");
 
 	V3D_WRITE(V3D_MMU_CTL, V3D_READ(V3D_MMU_CTL) |
 		  V3D_MMU_CTL_TLB_CLEAR);
@@ -52,14 +52,14 @@ static int v3d_mmu_flush_all(struct v3d_dev *v3d)
 	ret = wait_for(!(V3D_READ(V3D_MMU_CTL) &
 			 V3D_MMU_CTL_TLB_CLEARING), 100);
 	if (ret) {
-		dev_err(v3d->dev, "TLB clear wait idle failed\n");
+		dev_err(v3d->drm.dev, "TLB clear wait idle failed\n");
 		return ret;
 	}
 
 	ret = wait_for(!(V3D_READ(V3D_MMUC_CONTROL) &
 			 V3D_MMUC_CONTROL_FLUSHING), 100);
 	if (ret)
-		dev_err(v3d->dev, "MMUC flush wait idle failed\n");
+		dev_err(v3d->drm.dev, "MMUC flush wait idle failed\n");
 
 	return ret;
 }
@@ -109,7 +109,7 @@ void v3d_mmu_insert_ptes(struct v3d_bo *bo)
 		     shmem_obj->base.size >> V3D_MMU_PAGE_SHIFT);
 
 	if (v3d_mmu_flush_all(v3d))
-		dev_err(v3d->dev, "MMU flush timeout\n");
+		dev_err(v3d->drm.dev, "MMU flush timeout\n");
 }
 
 void v3d_mmu_remove_ptes(struct v3d_bo *bo)
@@ -122,5 +122,5 @@ void v3d_mmu_remove_ptes(struct v3d_bo *bo)
 		v3d->pt[page] = 0;
 
 	if (v3d_mmu_flush_all(v3d))
-		dev_err(v3d->dev, "MMU flush timeout\n");
+		dev_err(v3d->drm.dev, "MMU flush timeout\n");
 }
diff --git a/drivers/gpu/drm/v3d/v3d_sched.c b/drivers/gpu/drm/v3d/v3d_sched.c
index 8c2df6d95283..0747614a78f0 100644
--- a/drivers/gpu/drm/v3d/v3d_sched.c
+++ b/drivers/gpu/drm/v3d/v3d_sched.c
@@ -403,7 +403,7 @@ v3d_sched_init(struct v3d_dev *v3d)
 			     msecs_to_jiffies(hang_limit_ms),
 			     "v3d_bin");
 	if (ret) {
-		dev_err(v3d->dev, "Failed to create bin scheduler: %d.", ret);
+		dev_err(v3d->drm.dev, "Failed to create bin scheduler: %d.", ret);
 		return ret;
 	}
 
@@ -413,7 +413,7 @@ v3d_sched_init(struct v3d_dev *v3d)
 			     msecs_to_jiffies(hang_limit_ms),
 			     "v3d_render");
 	if (ret) {
-		dev_err(v3d->dev, "Failed to create render scheduler: %d.",
+		dev_err(v3d->drm.dev, "Failed to create render scheduler: %d.",
 			ret);
 		v3d_sched_fini(v3d);
 		return ret;
@@ -425,7 +425,7 @@ v3d_sched_init(struct v3d_dev *v3d)
 			     msecs_to_jiffies(hang_limit_ms),
 			     "v3d_tfu");
 	if (ret) {
-		dev_err(v3d->dev, "Failed to create TFU scheduler: %d.",
+		dev_err(v3d->drm.dev, "Failed to create TFU scheduler: %d.",
 			ret);
 		v3d_sched_fini(v3d);
 		return ret;
@@ -438,7 +438,7 @@ v3d_sched_init(struct v3d_dev *v3d)
 				     msecs_to_jiffies(hang_limit_ms),
 				     "v3d_csd");
 		if (ret) {
-			dev_err(v3d->dev, "Failed to create CSD scheduler: %d.",
+			dev_err(v3d->drm.dev, "Failed to create CSD scheduler: %d.",
 				ret);
 			v3d_sched_fini(v3d);
 			return ret;
@@ -450,7 +450,7 @@ v3d_sched_init(struct v3d_dev *v3d)
 				     msecs_to_jiffies(hang_limit_ms),
 				     "v3d_cache_clean");
 		if (ret) {
-			dev_err(v3d->dev, "Failed to create CACHE_CLEAN scheduler: %d.",
+			dev_err(v3d->drm.dev, "Failed to create CACHE_CLEAN scheduler: %d.",
 				ret);
 			v3d_sched_fini(v3d);
 			return ret;
diff --git a/drivers/gpu/drm/vboxvideo/vbox_drv.c b/drivers/gpu/drm/vboxvideo/vbox_drv.c
index ac8f75db2ecd..cf2e3e6a2388 100644
--- a/drivers/gpu/drm/vboxvideo/vbox_drv.c
+++ b/drivers/gpu/drm/vboxvideo/vbox_drv.c
@@ -17,6 +17,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_file.h>
 #include <drm/drm_ioctl.h>
+#include <drm/drm_managed.h>
 
 #include "vbox_drv.h"
 
@@ -45,28 +46,22 @@ static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret)
 		return ret;
 
-	vbox = kzalloc(sizeof(*vbox), GFP_KERNEL);
-	if (!vbox)
-		return -ENOMEM;
-
-	ret = drm_dev_init(&vbox->ddev, &driver, &pdev->dev);
-	if (ret) {
-		kfree(vbox);
-		return ret;
-	}
+	vbox = devm_drm_dev_alloc(&pdev->dev, &driver,
+				  struct vbox_private, ddev);
+	if (IS_ERR(vbox))
+		return PTR_ERR(vbox);
 
 	vbox->ddev.pdev = pdev;
-	vbox->ddev.dev_private = vbox;
 	pci_set_drvdata(pdev, vbox);
 	mutex_init(&vbox->hw_mutex);
 
-	ret = pci_enable_device(pdev);
+	ret = pcim_enable_device(pdev);
 	if (ret)
-		goto err_dev_put;
+		return ret;
 
 	ret = vbox_hw_init(vbox);
 	if (ret)
-		goto err_pci_disable;
+		return ret;
 
 	ret = vbox_mm_init(vbox);
 	if (ret)
@@ -80,14 +75,12 @@ static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret)
 		goto err_mode_fini;
 
-	ret = drm_fbdev_generic_setup(&vbox->ddev, 32);
-	if (ret)
-		goto err_irq_fini;
-
 	ret = drm_dev_register(&vbox->ddev, 0);
 	if (ret)
 		goto err_irq_fini;
 
+	drm_fbdev_generic_setup(&vbox->ddev, 32);
+
 	return 0;
 
 err_irq_fini:
@@ -98,10 +91,6 @@ static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	vbox_mm_fini(vbox);
 err_hw_fini:
 	vbox_hw_fini(vbox);
-err_pci_disable:
-	pci_disable_device(pdev);
-err_dev_put:
-	drm_dev_put(&vbox->ddev);
 	return ret;
 }
 
@@ -114,7 +103,6 @@ static void vbox_pci_remove(struct pci_dev *pdev)
 	vbox_mode_fini(vbox);
 	vbox_mm_fini(vbox);
 	vbox_hw_fini(vbox);
-	drm_dev_put(&vbox->ddev);
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/gpu/drm/vboxvideo/vbox_drv.h b/drivers/gpu/drm/vboxvideo/vbox_drv.h
index 87421903816c..ac7c2effc46f 100644
--- a/drivers/gpu/drm/vboxvideo/vbox_drv.h
+++ b/drivers/gpu/drm/vboxvideo/vbox_drv.h
@@ -127,6 +127,7 @@ struct vbox_encoder {
 #define to_vbox_crtc(x) container_of(x, struct vbox_crtc, base)
 #define to_vbox_connector(x) container_of(x, struct vbox_connector, base)
 #define to_vbox_encoder(x) container_of(x, struct vbox_encoder, base)
+#define to_vbox_dev(x) container_of(x, struct vbox_private, ddev)
 
 bool vbox_check_supported(u16 id);
 int vbox_hw_init(struct vbox_private *vbox);
diff --git a/drivers/gpu/drm/vboxvideo/vbox_irq.c b/drivers/gpu/drm/vboxvideo/vbox_irq.c
index 16a1e29f5292..631657fa554f 100644
--- a/drivers/gpu/drm/vboxvideo/vbox_irq.c
+++ b/drivers/gpu/drm/vboxvideo/vbox_irq.c
@@ -34,7 +34,7 @@ void vbox_report_hotplug(struct vbox_private *vbox)
 irqreturn_t vbox_irq_handler(int irq, void *arg)
 {
 	struct drm_device *dev = (struct drm_device *)arg;
-	struct vbox_private *vbox = (struct vbox_private *)dev->dev_private;
+	struct vbox_private *vbox = to_vbox_dev(dev);
 	u32 host_flags = vbox_get_flags(vbox);
 
 	if (!(host_flags & HGSMIHOSTFLAGS_IRQ))
diff --git a/drivers/gpu/drm/vboxvideo/vbox_main.c b/drivers/gpu/drm/vboxvideo/vbox_main.c
index 9dcab115a261..d68d9bad7674 100644
--- a/drivers/gpu/drm/vboxvideo/vbox_main.c
+++ b/drivers/gpu/drm/vboxvideo/vbox_main.c
@@ -71,8 +71,6 @@ static void vbox_accel_fini(struct vbox_private *vbox)
 
 	for (i = 0; i < vbox->num_crtcs; ++i)
 		vbva_disable(&vbox->vbva_info[i], vbox->guest_pool, i);
-
-	pci_iounmap(vbox->ddev.pdev, vbox->vbva_buffers);
 }
 
 /* Do we support the 4.3 plus mode hint reporting interface? */
@@ -123,21 +121,22 @@ int vbox_hw_init(struct vbox_private *vbox)
 		return -ENOMEM;
 
 	/* Create guest-heap mem-pool use 2^4 = 16 byte chunks */
-	vbox->guest_pool = gen_pool_create(4, -1);
+	vbox->guest_pool = devm_gen_pool_create(vbox->ddev.dev, 4, -1,
+						"vboxvideo-accel");
 	if (!vbox->guest_pool)
-		goto err_unmap_guest_heap;
+		return -ENOMEM;
 
 	ret = gen_pool_add_virt(vbox->guest_pool,
 				(unsigned long)vbox->guest_heap,
 				GUEST_HEAP_OFFSET(vbox),
 				GUEST_HEAP_USABLE_SIZE, -1);
 	if (ret)
-		goto err_destroy_guest_pool;
+		return ret;
 
 	ret = hgsmi_test_query_conf(vbox->guest_pool);
 	if (ret) {
 		DRM_ERROR("vboxvideo: hgsmi_test_query_conf failed\n");
-		goto err_destroy_guest_pool;
+		return ret;
 	}
 
 	/* Reduce available VRAM size to reflect the guest heap. */
@@ -149,33 +148,23 @@ int vbox_hw_init(struct vbox_private *vbox)
 
 	if (!have_hgsmi_mode_hints(vbox)) {
 		ret = -ENOTSUPP;
-		goto err_destroy_guest_pool;
+		return ret;
 	}
 
 	vbox->last_mode_hints = devm_kcalloc(vbox->ddev.dev, vbox->num_crtcs,
 					     sizeof(struct vbva_modehint),
 					     GFP_KERNEL);
-	if (!vbox->last_mode_hints) {
-		ret = -ENOMEM;
-		goto err_destroy_guest_pool;
-	}
+	if (!vbox->last_mode_hints)
+		return -ENOMEM;
 
 	ret = vbox_accel_init(vbox);
 	if (ret)
-		goto err_destroy_guest_pool;
+		return ret;
 
 	return 0;
-
-err_destroy_guest_pool:
-	gen_pool_destroy(vbox->guest_pool);
-err_unmap_guest_heap:
-	pci_iounmap(vbox->ddev.pdev, vbox->guest_heap);
-	return ret;
 }
 
 void vbox_hw_fini(struct vbox_private *vbox)
 {
 	vbox_accel_fini(vbox);
-	gen_pool_destroy(vbox->guest_pool);
-	pci_iounmap(vbox->ddev.pdev, vbox->guest_heap);
 }
diff --git a/drivers/gpu/drm/vboxvideo/vbox_mode.c b/drivers/gpu/drm/vboxvideo/vbox_mode.c
index 0883a435e62b..d9a5af62af89 100644
--- a/drivers/gpu/drm/vboxvideo/vbox_mode.c
+++ b/drivers/gpu/drm/vboxvideo/vbox_mode.c
@@ -36,7 +36,7 @@ static void vbox_do_modeset(struct drm_crtc *crtc)
 	u16 flags;
 	s32 x_offset, y_offset;
 
-	vbox = crtc->dev->dev_private;
+	vbox = to_vbox_dev(crtc->dev);
 	width = vbox_crtc->width ? vbox_crtc->width : 640;
 	height = vbox_crtc->height ? vbox_crtc->height : 480;
 	bpp = fb ? fb->format->cpp[0] * 8 : 32;
@@ -77,7 +77,7 @@ static void vbox_do_modeset(struct drm_crtc *crtc)
 static int vbox_set_view(struct drm_crtc *crtc)
 {
 	struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
-	struct vbox_private *vbox = crtc->dev->dev_private;
+	struct vbox_private *vbox = to_vbox_dev(crtc->dev);
 	struct vbva_infoview *p;
 
 	/*
@@ -174,7 +174,7 @@ static void vbox_crtc_set_base_and_mode(struct drm_crtc *crtc,
 					int x, int y)
 {
 	struct drm_gem_vram_object *gbo = drm_gem_vram_of_gem(fb->obj[0]);
-	struct vbox_private *vbox = crtc->dev->dev_private;
+	struct vbox_private *vbox = to_vbox_dev(crtc->dev);
 	struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
 	bool needs_modeset = drm_atomic_crtc_needs_modeset(crtc->state);
 
@@ -272,7 +272,7 @@ static void vbox_primary_atomic_update(struct drm_plane *plane,
 {
 	struct drm_crtc *crtc = plane->state->crtc;
 	struct drm_framebuffer *fb = plane->state->fb;
-	struct vbox_private *vbox = fb->dev->dev_private;
+	struct vbox_private *vbox = to_vbox_dev(fb->dev);
 	struct drm_mode_rect *clips;
 	uint32_t num_clips, i;
 
@@ -704,7 +704,7 @@ static int vbox_get_modes(struct drm_connector *connector)
 	int preferred_width, preferred_height;
 
 	vbox_connector = to_vbox_connector(connector);
-	vbox = connector->dev->dev_private;
+	vbox = to_vbox_dev(connector->dev);
 
 	hgsmi_report_flags_location(vbox->guest_pool, GUEST_HEAP_OFFSET(vbox) +
 				    HOST_FLAGS_OFFSET);
diff --git a/drivers/gpu/drm/vboxvideo/vbox_ttm.c b/drivers/gpu/drm/vboxvideo/vbox_ttm.c
index 976423d0c3cc..f5a06675da43 100644
--- a/drivers/gpu/drm/vboxvideo/vbox_ttm.c
+++ b/drivers/gpu/drm/vboxvideo/vbox_ttm.c
@@ -24,25 +24,13 @@ int vbox_mm_init(struct vbox_private *vbox)
 		return ret;
 	}
 
-#ifdef DRM_MTRR_WC
-	vbox->fb_mtrr = drm_mtrr_add(pci_resource_start(dev->pdev, 0),
-				     pci_resource_len(dev->pdev, 0),
-				     DRM_MTRR_WC);
-#else
 	vbox->fb_mtrr = arch_phys_wc_add(pci_resource_start(dev->pdev, 0),
 					 pci_resource_len(dev->pdev, 0));
-#endif
 	return 0;
 }
 
 void vbox_mm_fini(struct vbox_private *vbox)
 {
-#ifdef DRM_MTRR_WC
-	drm_mtrr_del(vbox->fb_mtrr,
-		     pci_resource_start(vbox->ddev.pdev, 0),
-		     pci_resource_len(vbox->ddev.pdev, 0), DRM_MTRR_WC);
-#else
 	arch_phys_wc_del(vbox->fb_mtrr);
-#endif
 	drm_vram_helper_release_mm(&vbox->ddev);
 }
diff --git a/drivers/gpu/drm/vc4/vc4_debugfs.c b/drivers/gpu/drm/vc4/vc4_debugfs.c
index b61b2d3407b5..4fbbf980a299 100644
--- a/drivers/gpu/drm/vc4/vc4_debugfs.c
+++ b/drivers/gpu/drm/vc4/vc4_debugfs.c
@@ -20,7 +20,7 @@ struct vc4_debugfs_info_entry {
  * Called at drm_dev_register() time on each of the minors registered
  * by the DRM device, to attach the debugfs files.
  */
-int
+void
 vc4_debugfs_init(struct drm_minor *minor)
 {
 	struct vc4_dev *vc4 = to_vc4_dev(minor->dev);
@@ -30,14 +30,9 @@ vc4_debugfs_init(struct drm_minor *minor)
 			    minor->debugfs_root, &vc4->load_tracker_enabled);
 
 	list_for_each_entry(entry, &vc4->debugfs_list, link) {
-		int ret = drm_debugfs_create_files(&entry->info, 1,
-						   minor->debugfs_root, minor);
-
-		if (ret)
-			return ret;
+		drm_debugfs_create_files(&entry->info, 1,
+					 minor->debugfs_root, minor);
 	}
-
-	return 0;
 }
 
 static int vc4_debugfs_regset32(struct seq_file *m, void *unused)
diff --git a/drivers/gpu/drm/vc4/vc4_dpi.c b/drivers/gpu/drm/vc4/vc4_dpi.c
index 6dfede03396e..a90f2545baee 100644
--- a/drivers/gpu/drm/vc4/vc4_dpi.c
+++ b/drivers/gpu/drm/vc4/vc4_dpi.c
@@ -17,6 +17,7 @@
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/of_graph.h>
@@ -114,10 +115,6 @@ static const struct debugfs_reg32 dpi_regs[] = {
 	VC4_REG32(DPI_ID),
 };
 
-static const struct drm_encoder_funcs vc4_dpi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static void vc4_dpi_encoder_disable(struct drm_encoder *encoder)
 {
 	struct vc4_dpi_encoder *vc4_encoder = to_vc4_dpi_encoder(encoder);
@@ -309,8 +306,7 @@ static int vc4_dpi_bind(struct device *dev, struct device *master, void *data)
 	if (ret)
 		DRM_ERROR("Failed to turn on core clock: %d\n", ret);
 
-	drm_encoder_init(drm, dpi->encoder, &vc4_dpi_encoder_funcs,
-			 DRM_MODE_ENCODER_DPI, NULL);
+	drm_simple_encoder_init(drm, dpi->encoder, DRM_MODE_ENCODER_DPI);
 	drm_encoder_helper_add(dpi->encoder, &vc4_dpi_encoder_helper_funcs);
 
 	ret = vc4_dpi_init_bridge(dpi);
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 139d25a8328e..3b1f02efefbe 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -759,7 +759,7 @@ void vc4_crtc_get_margins(struct drm_crtc_state *state,
 			  unsigned int *top, unsigned int *bottom);
 
 /* vc4_debugfs.c */
-int vc4_debugfs_init(struct drm_minor *minor);
+void vc4_debugfs_init(struct drm_minor *minor);
 #ifdef CONFIG_DEBUG_FS
 void vc4_debugfs_add_file(struct drm_device *drm,
 			  const char *filename,
diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index d99b1d526651..eaf276978ee7 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -37,6 +37,7 @@
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "vc4_drv.h"
 #include "vc4_regs.h"
@@ -652,15 +653,6 @@ static const struct debugfs_reg32 dsi1_regs[] = {
 	VC4_REG32(DSI1_ID),
 };
 
-static void vc4_dsi_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs vc4_dsi_encoder_funcs = {
-	.destroy = vc4_dsi_encoder_destroy,
-};
-
 static void vc4_dsi_latch_ulps(struct vc4_dsi *dsi, bool latch)
 {
 	u32 afec0 = DSI_PORT_READ(PHY_AFEC0);
@@ -1615,8 +1607,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 	if (dsi->port == 1)
 		vc4->dsi1 = dsi;
 
-	drm_encoder_init(drm, dsi->encoder, &vc4_dsi_encoder_funcs,
-			 DRM_MODE_ENCODER_DSI, NULL);
+	drm_simple_encoder_init(drm, dsi->encoder, DRM_MODE_ENCODER_DSI);
 	drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs);
 
 	ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL, 0);
@@ -1656,7 +1647,7 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master,
 	 * normally.
 	 */
 	list_splice_init(&dsi->bridge_chain, &dsi->encoder->bridge_chain);
-	vc4_dsi_encoder_destroy(dsi->encoder);
+	drm_encoder_cleanup(dsi->encoder);
 
 	if (dsi->port == 1)
 		vc4->dsi1 = NULL;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 340719238753..625bfcf52dc4 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -34,6 +34,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/i2c.h>
@@ -306,15 +307,6 @@ static struct drm_connector *vc4_hdmi_connector_init(struct drm_device *dev,
 	return connector;
 }
 
-static void vc4_hdmi_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs vc4_hdmi_encoder_funcs = {
-	.destroy = vc4_hdmi_encoder_destroy,
-};
-
 static int vc4_hdmi_stop_packet(struct drm_encoder *encoder,
 				enum hdmi_infoframe_type type)
 {
@@ -1406,8 +1398,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	}
 	pm_runtime_enable(dev);
 
-	drm_encoder_init(drm, hdmi->encoder, &vc4_hdmi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm, hdmi->encoder, DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(hdmi->encoder, &vc4_hdmi_encoder_helper_funcs);
 
 	hdmi->connector =
@@ -1465,7 +1456,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	vc4_hdmi_connector_destroy(hdmi->connector);
 #endif
 err_destroy_encoder:
-	vc4_hdmi_encoder_destroy(hdmi->encoder);
+	drm_encoder_cleanup(hdmi->encoder);
 err_unprepare_hsm:
 	clk_disable_unprepare(hdmi->hsm_clock);
 	pm_runtime_disable(dev);
@@ -1484,7 +1475,7 @@ static void vc4_hdmi_unbind(struct device *dev, struct device *master,
 
 	cec_unregister_adapter(hdmi->cec_adap);
 	vc4_hdmi_connector_destroy(hdmi->connector);
-	vc4_hdmi_encoder_destroy(hdmi->encoder);
+	drm_encoder_cleanup(hdmi->encoder);
 
 	clk_disable_unprepare(hdmi->hsm_clock);
 	pm_runtime_disable(dev);
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 7402bc768664..bd5b8eb58b18 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -17,6 +17,7 @@
 #include <drm/drm_edid.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/of_graph.h>
@@ -374,10 +375,6 @@ static struct drm_connector *vc4_vec_connector_init(struct drm_device *dev,
 	return connector;
 }
 
-static const struct drm_encoder_funcs vc4_vec_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static void vc4_vec_encoder_disable(struct drm_encoder *encoder)
 {
 	struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder);
@@ -566,8 +563,7 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	pm_runtime_enable(dev);
 
-	drm_encoder_init(drm, vec->encoder, &vc4_vec_encoder_funcs,
-			 DRM_MODE_ENCODER_TVDAC, NULL);
+	drm_simple_encoder_init(drm, vec->encoder, DRM_MODE_ENCODER_TVDAC);
 	drm_encoder_helper_add(vec->encoder, &vc4_vec_encoder_helper_funcs);
 
 	vec->connector = vc4_vec_connector_init(drm, vec);
diff --git a/drivers/gpu/drm/vgem/vgem_drv.c b/drivers/gpu/drm/vgem/vgem_drv.c
index 909eba43664a..ec1a8ebb6f1b 100644
--- a/drivers/gpu/drm/vgem/vgem_drv.c
+++ b/drivers/gpu/drm/vgem/vgem_drv.c
@@ -39,6 +39,7 @@
 #include <drm/drm_drv.h>
 #include <drm/drm_file.h>
 #include <drm/drm_ioctl.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_prime.h>
 
 #include "vgem_drv.h"
@@ -431,9 +432,6 @@ static void vgem_release(struct drm_device *dev)
 	struct vgem_device *vgem = container_of(dev, typeof(*vgem), drm);
 
 	platform_device_unregister(vgem->platform);
-	drm_dev_fini(&vgem->drm);
-
-	kfree(vgem);
 }
 
 static struct drm_driver vgem_driver = {
@@ -489,16 +487,19 @@ static int __init vgem_init(void)
 			   &vgem_device->platform->dev);
 	if (ret)
 		goto out_unregister;
+	drmm_add_final_kfree(&vgem_device->drm, vgem_device);
 
 	/* Final step: expose the device/driver to userspace */
-	ret  = drm_dev_register(&vgem_device->drm, 0);
+	ret = drm_dev_register(&vgem_device->drm, 0);
 	if (ret)
-		goto out_fini;
+		goto out_put;
 
 	return 0;
 
-out_fini:
-	drm_dev_fini(&vgem_device->drm);
+out_put:
+	drm_dev_put(&vgem_device->drm);
+	return ret;
+
 out_unregister:
 	platform_device_unregister(vgem_device->platform);
 out_free:
diff --git a/drivers/gpu/drm/virtio/virtgpu_debugfs.c b/drivers/gpu/drm/virtio/virtgpu_debugfs.c
index e27120d512b0..3221520f61f0 100644
--- a/drivers/gpu/drm/virtio/virtgpu_debugfs.c
+++ b/drivers/gpu/drm/virtio/virtgpu_debugfs.c
@@ -72,11 +72,10 @@ static struct drm_info_list virtio_gpu_debugfs_list[] = {
 
 #define VIRTIO_GPU_DEBUGFS_ENTRIES ARRAY_SIZE(virtio_gpu_debugfs_list)
 
-int
+void
 virtio_gpu_debugfs_init(struct drm_minor *minor)
 {
 	drm_debugfs_create_files(virtio_gpu_debugfs_list,
 				 VIRTIO_GPU_DEBUGFS_ENTRIES,
 				 minor->debugfs_root, minor);
-	return 0;
 }
diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c
index 2b7e6ae65546..cc7fd957a307 100644
--- a/drivers/gpu/drm/virtio/virtgpu_display.c
+++ b/drivers/gpu/drm/virtio/virtgpu_display.c
@@ -30,6 +30,7 @@
 #include <drm/drm_fourcc.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "virtgpu_drv.h"
 
@@ -240,10 +241,6 @@ static const struct drm_connector_funcs virtio_gpu_connector_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
-static const struct drm_encoder_funcs virtio_gpu_enc_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int vgdev_output_init(struct virtio_gpu_device *vgdev, int index)
 {
 	struct drm_device *dev = vgdev->ddev;
@@ -276,8 +273,7 @@ static int vgdev_output_init(struct virtio_gpu_device *vgdev, int index)
 	if (vgdev->has_edid)
 		drm_connector_attach_edid_property(connector);
 
-	drm_encoder_init(dev, encoder, &virtio_gpu_enc_funcs,
-			 DRM_MODE_ENCODER_VIRTUAL, NULL);
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_VIRTUAL);
 	drm_encoder_helper_add(encoder, &virtio_gpu_enc_helper_funcs);
 	encoder->possible_crtcs = 1 << index;
 
diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.h b/drivers/gpu/drm/virtio/virtgpu_drv.h
index c1824bdf2418..49bebdee6d91 100644
--- a/drivers/gpu/drm/virtio/virtgpu_drv.h
+++ b/drivers/gpu/drm/virtio/virtgpu_drv.h
@@ -218,26 +218,18 @@ struct virtio_gpu_fpriv {
 	struct mutex context_lock;
 };
 
-/* virtio_ioctl.c */
+/* virtgpu_ioctl.c */
 #define DRM_VIRTIO_NUM_IOCTLS 10
 extern struct drm_ioctl_desc virtio_gpu_ioctls[DRM_VIRTIO_NUM_IOCTLS];
 
-/* virtio_kms.c */
+/* virtgpu_kms.c */
 int virtio_gpu_init(struct drm_device *dev);
 void virtio_gpu_deinit(struct drm_device *dev);
 void virtio_gpu_release(struct drm_device *dev);
 int virtio_gpu_driver_open(struct drm_device *dev, struct drm_file *file);
 void virtio_gpu_driver_postclose(struct drm_device *dev, struct drm_file *file);
 
-/* virtio_gem.c */
-void virtio_gpu_gem_free_object(struct drm_gem_object *gem_obj);
-int virtio_gpu_gem_init(struct virtio_gpu_device *vgdev);
-void virtio_gpu_gem_fini(struct virtio_gpu_device *vgdev);
-int virtio_gpu_gem_create(struct drm_file *file,
-			  struct drm_device *dev,
-			  struct virtio_gpu_object_params *params,
-			  struct drm_gem_object **obj_p,
-			  uint32_t *handle_p);
+/* virtgpu_gem.c */
 int virtio_gpu_gem_object_open(struct drm_gem_object *obj,
 			       struct drm_file *file);
 void virtio_gpu_gem_object_close(struct drm_gem_object *obj,
@@ -263,7 +255,7 @@ void virtio_gpu_array_put_free_delayed(struct virtio_gpu_device *vgdev,
 				       struct virtio_gpu_object_array *objs);
 void virtio_gpu_array_put_free_work(struct work_struct *work);
 
-/* virtio vg */
+/* virtgpu_vq.c */
 int virtio_gpu_alloc_vbufs(struct virtio_gpu_device *vgdev);
 void virtio_gpu_free_vbufs(struct virtio_gpu_device *vgdev);
 void virtio_gpu_cmd_create_resource(struct virtio_gpu_device *vgdev,
@@ -287,10 +279,10 @@ void virtio_gpu_cmd_set_scanout(struct virtio_gpu_device *vgdev,
 				uint32_t scanout_id, uint32_t resource_id,
 				uint32_t width, uint32_t height,
 				uint32_t x, uint32_t y);
-int virtio_gpu_object_attach(struct virtio_gpu_device *vgdev,
-			     struct virtio_gpu_object *obj,
-			     struct virtio_gpu_mem_entry *ents,
-			     unsigned int nents);
+void virtio_gpu_object_attach(struct virtio_gpu_device *vgdev,
+			      struct virtio_gpu_object *obj,
+			      struct virtio_gpu_mem_entry *ents,
+			      unsigned int nents);
 int virtio_gpu_attach_status_page(struct virtio_gpu_device *vgdev);
 int virtio_gpu_detach_status_page(struct virtio_gpu_device *vgdev);
 void virtio_gpu_cursor_ping(struct virtio_gpu_device *vgdev,
@@ -343,17 +335,17 @@ void virtio_gpu_dequeue_fence_func(struct work_struct *work);
 
 void virtio_gpu_notify(struct virtio_gpu_device *vgdev);
 
-/* virtio_gpu_display.c */
+/* virtgpu_display.c */
 void virtio_gpu_modeset_init(struct virtio_gpu_device *vgdev);
 void virtio_gpu_modeset_fini(struct virtio_gpu_device *vgdev);
 
-/* virtio_gpu_plane.c */
+/* virtgpu_plane.c */
 uint32_t virtio_gpu_translate_format(uint32_t drm_fourcc);
 struct drm_plane *virtio_gpu_plane_init(struct virtio_gpu_device *vgdev,
 					enum drm_plane_type type,
 					int index);
 
-/* virtio_gpu_fence.c */
+/* virtgpu_fence.c */
 struct virtio_gpu_fence *virtio_gpu_fence_alloc(
 	struct virtio_gpu_device *vgdev);
 void virtio_gpu_fence_emit(struct virtio_gpu_device *vgdev,
@@ -362,7 +354,7 @@ void virtio_gpu_fence_emit(struct virtio_gpu_device *vgdev,
 void virtio_gpu_fence_event_process(struct virtio_gpu_device *vdev,
 				    u64 last_seq);
 
-/* virtio_gpu_object */
+/* virtgpu_object.c */
 void virtio_gpu_cleanup_object(struct virtio_gpu_object *bo);
 struct drm_gem_object *virtio_gpu_create_object(struct drm_device *dev,
 						size_t size);
@@ -378,7 +370,7 @@ struct drm_gem_object *virtgpu_gem_prime_import_sg_table(
 	struct drm_device *dev, struct dma_buf_attachment *attach,
 	struct sg_table *sgt);
 
-/* virgl debugfs */
-int virtio_gpu_debugfs_init(struct drm_minor *minor);
+/* virtgpu_debugfs.c */
+void virtio_gpu_debugfs_init(struct drm_minor *minor);
 
 #endif
diff --git a/drivers/gpu/drm/virtio/virtgpu_gem.c b/drivers/gpu/drm/virtio/virtgpu_gem.c
index 0d6152c99a27..1025658be4df 100644
--- a/drivers/gpu/drm/virtio/virtgpu_gem.c
+++ b/drivers/gpu/drm/virtio/virtgpu_gem.c
@@ -28,11 +28,11 @@
 
 #include "virtgpu_drv.h"
 
-int virtio_gpu_gem_create(struct drm_file *file,
-			  struct drm_device *dev,
-			  struct virtio_gpu_object_params *params,
-			  struct drm_gem_object **obj_p,
-			  uint32_t *handle_p)
+static int virtio_gpu_gem_create(struct drm_file *file,
+				 struct drm_device *dev,
+				 struct virtio_gpu_object_params *params,
+				 struct drm_gem_object **obj_p,
+				 uint32_t *handle_p)
 {
 	struct virtio_gpu_device *vgdev = dev->dev_private;
 	struct virtio_gpu_object *obj;
@@ -114,7 +114,7 @@ int virtio_gpu_gem_object_open(struct drm_gem_object *obj,
 	struct virtio_gpu_object_array *objs;
 
 	if (!vgdev->has_virgl_3d)
-		return 0;
+		goto out_notify;
 
 	objs = virtio_gpu_array_alloc(1);
 	if (!objs)
@@ -123,6 +123,7 @@ int virtio_gpu_gem_object_open(struct drm_gem_object *obj,
 
 	virtio_gpu_cmd_context_attach_resource(vgdev, vfpriv->ctx_id,
 					       objs);
+out_notify:
 	virtio_gpu_notify(vgdev);
 	return 0;
 }
diff --git a/drivers/gpu/drm/virtio/virtgpu_ioctl.c b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
index 3f60bf2fe05a..4625d557862b 100644
--- a/drivers/gpu/drm/virtio/virtgpu_ioctl.c
+++ b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
@@ -48,7 +48,6 @@ static void virtio_gpu_create_context(struct drm_device *dev,
 	get_task_comm(dbgname, current);
 	virtio_gpu_cmd_context_create(vgdev, vfpriv->ctx_id,
 				      strlen(dbgname), dbgname);
-	virtio_gpu_notify(vgdev);
 	vfpriv->context_created = true;
 
 out_unlock:
diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c
index f4ea4cef5e23..0a5c8cf409fb 100644
--- a/drivers/gpu/drm/virtio/virtgpu_kms.c
+++ b/drivers/gpu/drm/virtio/virtgpu_kms.c
@@ -53,14 +53,6 @@ static void virtio_gpu_config_changed_work_func(struct work_struct *work)
 		      events_clear, &events_clear);
 }
 
-static void virtio_gpu_context_destroy(struct virtio_gpu_device *vgdev,
-				      uint32_t ctx_id)
-{
-	virtio_gpu_cmd_context_destroy(vgdev, ctx_id);
-	virtio_gpu_notify(vgdev);
-	ida_free(&vgdev->ctx_id_ida, ctx_id - 1);
-}
-
 static void virtio_gpu_init_vq(struct virtio_gpu_queue *vgvq,
 			       void (*work_func)(struct work_struct *work))
 {
@@ -275,14 +267,17 @@ int virtio_gpu_driver_open(struct drm_device *dev, struct drm_file *file)
 void virtio_gpu_driver_postclose(struct drm_device *dev, struct drm_file *file)
 {
 	struct virtio_gpu_device *vgdev = dev->dev_private;
-	struct virtio_gpu_fpriv *vfpriv;
+	struct virtio_gpu_fpriv *vfpriv = file->driver_priv;
 
 	if (!vgdev->has_virgl_3d)
 		return;
 
-	vfpriv = file->driver_priv;
+	if (vfpriv->context_created) {
+		virtio_gpu_cmd_context_destroy(vgdev, vfpriv->ctx_id);
+		virtio_gpu_notify(vgdev);
+	}
 
-	virtio_gpu_context_destroy(vgdev, vfpriv->ctx_id);
+	ida_free(&vgdev->ctx_id_ida, vfpriv->ctx_id - 1);
 	mutex_destroy(&vfpriv->context_lock);
 	kfree(vfpriv);
 	file->driver_priv = NULL;
diff --git a/drivers/gpu/drm/virtio/virtgpu_object.c b/drivers/gpu/drm/virtio/virtgpu_object.c
index d9039bb7c5e3..6ccbd01cd888 100644
--- a/drivers/gpu/drm/virtio/virtgpu_object.c
+++ b/drivers/gpu/drm/virtio/virtgpu_object.c
@@ -235,13 +235,8 @@ int virtio_gpu_object_create(struct virtio_gpu_device *vgdev,
 		return ret;
 	}
 
-	ret = virtio_gpu_object_attach(vgdev, bo, ents, nents);
-	if (ret != 0) {
-		virtio_gpu_free_object(&shmem_obj->base);
-		return ret;
-	}
+	virtio_gpu_object_attach(vgdev, bo, ents, nents);
 
-	virtio_gpu_notify(vgdev);
 	*bo_ptr = bo;
 	return 0;
 
diff --git a/drivers/gpu/drm/virtio/virtgpu_vq.c b/drivers/gpu/drm/virtio/virtgpu_vq.c
index 73854915ec34..9e663a5d9952 100644
--- a/drivers/gpu/drm/virtio/virtgpu_vq.c
+++ b/drivers/gpu/drm/virtio/virtgpu_vq.c
@@ -1087,14 +1087,13 @@ void virtio_gpu_cmd_submit(struct virtio_gpu_device *vgdev,
 	virtio_gpu_queue_fenced_ctrl_buffer(vgdev, vbuf, fence);
 }
 
-int virtio_gpu_object_attach(struct virtio_gpu_device *vgdev,
-			     struct virtio_gpu_object *obj,
-			     struct virtio_gpu_mem_entry *ents,
-			     unsigned int nents)
+void virtio_gpu_object_attach(struct virtio_gpu_device *vgdev,
+			      struct virtio_gpu_object *obj,
+			      struct virtio_gpu_mem_entry *ents,
+			      unsigned int nents)
 {
 	virtio_gpu_cmd_resource_attach_backing(vgdev, obj->hw_res_handle,
 					       ents, nents, NULL);
-	return 0;
 }
 
 void virtio_gpu_cursor_ping(struct virtio_gpu_device *vgdev,
diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
index 860de052e820..eef85f1a0ce5 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.c
+++ b/drivers/gpu/drm/vkms/vkms_drv.c
@@ -21,6 +21,7 @@
 #include <drm/drm_file.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_ioctl.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_vblank.h>
 
@@ -63,7 +64,6 @@ static void vkms_release(struct drm_device *dev)
 	platform_device_unregister(vkms->platform);
 	drm_atomic_helper_shutdown(&vkms->drm);
 	drm_mode_config_cleanup(&vkms->drm);
-	drm_dev_fini(&vkms->drm);
 	destroy_workqueue(vkms->output.composer_workq);
 }
 
@@ -158,13 +158,14 @@ static int __init vkms_init(void)
 			   &vkms_device->platform->dev);
 	if (ret)
 		goto out_unregister;
+	drmm_add_final_kfree(&vkms_device->drm, vkms_device);
 
 	ret = dma_coerce_mask_and_coherent(vkms_device->drm.dev,
 					   DMA_BIT_MASK(64));
 
 	if (ret) {
 		DRM_ERROR("Could not initialize DMA support\n");
-		goto out_fini;
+		goto out_put;
 	}
 
 	vkms_device->drm.irq_enabled = true;
@@ -172,25 +173,25 @@ static int __init vkms_init(void)
 	ret = drm_vblank_init(&vkms_device->drm, 1);
 	if (ret) {
 		DRM_ERROR("Failed to vblank\n");
-		goto out_fini;
+		goto out_put;
 	}
 
 	ret = vkms_modeset_init(vkms_device);
 	if (ret)
-		goto out_fini;
+		goto out_put;
 
 	ret = drm_dev_register(&vkms_device->drm, 0);
 	if (ret)
-		goto out_fini;
+		goto out_put;
 
 	return 0;
 
-out_fini:
-	drm_dev_fini(&vkms_device->drm);
+out_put:
+	drm_dev_put(&vkms_device->drm);
+	return ret;
 
 out_unregister:
 	platform_device_unregister(vkms_device->platform);
-
 out_free:
 	kfree(vkms_device);
 	return ret;
@@ -205,8 +206,6 @@ static void __exit vkms_exit(void)
 
 	drm_dev_unregister(&vkms_device->drm);
 	drm_dev_put(&vkms_device->drm);
-
-	kfree(vkms_device);
 }
 
 module_init(vkms_init);
diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
index fb1941a6522c..85afb77e97f0 100644
--- a/drivers/gpu/drm/vkms/vkms_output.c
+++ b/drivers/gpu/drm/vkms/vkms_output.c
@@ -3,6 +3,7 @@
 #include "vkms_drv.h"
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 static void vkms_connector_destroy(struct drm_connector *connector)
 {
@@ -17,10 +18,6 @@ static const struct drm_connector_funcs vkms_connector_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
-static const struct drm_encoder_funcs vkms_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int vkms_conn_get_modes(struct drm_connector *connector)
 {
 	int count;
@@ -70,8 +67,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
 
 	drm_connector_helper_add(connector, &vkms_conn_helper_funcs);
 
-	ret = drm_encoder_init(dev, encoder, &vkms_encoder_funcs,
-			       DRM_MODE_ENCODER_VIRTUAL, NULL);
+	ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_VIRTUAL);
 	if (ret) {
 		DRM_ERROR("Failed to init encoder\n");
 		goto err_encoder;
diff --git a/drivers/gpu/drm/xen/xen_drm_front.c b/drivers/gpu/drm/xen/xen_drm_front.c
index 374142018171..1fd458e877ca 100644
--- a/drivers/gpu/drm/xen/xen_drm_front.c
+++ b/drivers/gpu/drm/xen/xen_drm_front.c
@@ -460,9 +460,6 @@ static void xen_drm_drv_release(struct drm_device *dev)
 	drm_atomic_helper_shutdown(dev);
 	drm_mode_config_cleanup(dev);
 
-	drm_dev_fini(dev);
-	kfree(dev);
-
 	if (front_info->cfg.be_alloc)
 		xenbus_switch_state(front_info->xb_dev,
 				    XenbusStateInitialising);
@@ -561,6 +558,7 @@ static int xen_drm_drv_init(struct xen_drm_front_info *front_info)
 fail_modeset:
 	drm_kms_helper_poll_fini(drm_dev);
 	drm_mode_config_cleanup(drm_dev);
+	drm_dev_put(drm_dev);
 fail:
 	kfree(drm_info);
 	return ret;
diff --git a/drivers/gpu/drm/zte/zx_hdmi.c b/drivers/gpu/drm/zte/zx_hdmi.c
index b98a1420dcd3..76a16d997a23 100644
--- a/drivers/gpu/drm/zte/zx_hdmi.c
+++ b/drivers/gpu/drm/zte/zx_hdmi.c
@@ -20,6 +20,7 @@
 #include <drm/drm_of.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_print.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include <sound/hdmi-codec.h>
 
@@ -254,10 +255,6 @@ static const struct drm_encoder_helper_funcs zx_hdmi_encoder_helper_funcs = {
 	.mode_set = zx_hdmi_encoder_mode_set,
 };
 
-static const struct drm_encoder_funcs zx_hdmi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int zx_hdmi_connector_get_modes(struct drm_connector *connector)
 {
 	struct zx_hdmi *hdmi = to_zx_hdmi(connector);
@@ -313,8 +310,7 @@ static int zx_hdmi_register(struct drm_device *drm, struct zx_hdmi *hdmi)
 
 	encoder->possible_crtcs = VOU_CRTC_MASK;
 
-	drm_encoder_init(drm, encoder, &zx_hdmi_encoder_funcs,
-			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(encoder, &zx_hdmi_encoder_helper_funcs);
 
 	hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
diff --git a/drivers/gpu/drm/zte/zx_tvenc.c b/drivers/gpu/drm/zte/zx_tvenc.c
index c598b7daf1f1..d8a89ba383bc 100644
--- a/drivers/gpu/drm/zte/zx_tvenc.c
+++ b/drivers/gpu/drm/zte/zx_tvenc.c
@@ -14,6 +14,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "zx_drm_drv.h"
 #include "zx_tvenc_regs.h"
@@ -218,10 +219,6 @@ static const struct drm_encoder_helper_funcs zx_tvenc_encoder_helper_funcs = {
 	.mode_set = zx_tvenc_encoder_mode_set,
 };
 
-static const struct drm_encoder_funcs zx_tvenc_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int zx_tvenc_connector_get_modes(struct drm_connector *connector)
 {
 	struct zx_tvenc *tvenc = to_zx_tvenc(connector);
@@ -285,8 +282,7 @@ static int zx_tvenc_register(struct drm_device *drm, struct zx_tvenc *tvenc)
 	 */
 	encoder->possible_crtcs = BIT(1);
 
-	drm_encoder_init(drm, encoder, &zx_tvenc_encoder_funcs,
-			 DRM_MODE_ENCODER_TVDAC, NULL);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TVDAC);
 	drm_encoder_helper_add(encoder, &zx_tvenc_encoder_helper_funcs);
 
 	connector->interlace_allowed = true;
diff --git a/drivers/gpu/drm/zte/zx_vga.c b/drivers/gpu/drm/zte/zx_vga.c
index c4fa3bbaba78..a7ed7f5ca837 100644
--- a/drivers/gpu/drm/zte/zx_vga.c
+++ b/drivers/gpu/drm/zte/zx_vga.c
@@ -14,6 +14,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "zx_drm_drv.h"
 #include "zx_vga_regs.h"
@@ -72,10 +73,6 @@ static const struct drm_encoder_helper_funcs zx_vga_encoder_helper_funcs = {
 	.disable = zx_vga_encoder_disable,
 };
 
-static const struct drm_encoder_funcs zx_vga_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
 static int zx_vga_connector_get_modes(struct drm_connector *connector)
 {
 	struct zx_vga *vga = to_zx_vga(connector);
@@ -154,8 +151,7 @@ static int zx_vga_register(struct drm_device *drm, struct zx_vga *vga)
 
 	encoder->possible_crtcs = VOU_CRTC_MASK;
 
-	ret = drm_encoder_init(drm, encoder, &zx_vga_encoder_funcs,
-			       DRM_MODE_ENCODER_DAC, NULL);
+	ret = drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_DAC);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "failed to init encoder: %d\n", ret);
 		return ret;
diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c
index 388bcc2889aa..d24344e91922 100644
--- a/drivers/gpu/host1x/dev.c
+++ b/drivers/gpu/host1x/dev.c
@@ -192,17 +192,55 @@ static void host1x_setup_sid_table(struct host1x *host)
 	}
 }
 
+static bool host1x_wants_iommu(struct host1x *host1x)
+{
+	/*
+	 * If we support addressing a maximum of 32 bits of physical memory
+	 * and if the host1x firewall is enabled, there's no need to enable
+	 * IOMMU support. This can happen for example on Tegra20, Tegra30
+	 * and Tegra114.
+	 *
+	 * Tegra124 and later can address up to 34 bits of physical memory and
+	 * many platforms come equipped with more than 2 GiB of system memory,
+	 * which requires crossing the 4 GiB boundary. But there's a catch: on
+	 * SoCs before Tegra186 (i.e. Tegra124 and Tegra210), the host1x can
+	 * only address up to 32 bits of memory in GATHER opcodes, which means
+	 * that command buffers need to either be in the first 2 GiB of system
+	 * memory (which could quickly lead to memory exhaustion), or command
+	 * buffers need to be treated differently from other buffers (which is
+	 * not possible with the current ABI).
+	 *
+	 * A third option is to use the IOMMU in these cases to make sure all
+	 * buffers will be mapped into a 32-bit IOVA space that host1x can
+	 * address. This allows all of the system memory to be used and works
+	 * within the limitations of the host1x on these SoCs.
+	 *
+	 * In summary, default to enable IOMMU on Tegra124 and later. For any
+	 * of the earlier SoCs, only use the IOMMU for additional safety when
+	 * the host1x firewall is disabled.
+	 */
+	if (host1x->info->dma_mask <= DMA_BIT_MASK(32)) {
+		if (IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL))
+			return false;
+	}
+
+	return true;
+}
+
 static struct iommu_domain *host1x_iommu_attach(struct host1x *host)
 {
 	struct iommu_domain *domain = iommu_get_domain_for_dev(host->dev);
 	int err;
 
 	/*
-	 * If the host1x firewall is enabled, there's no need to enable IOMMU
-	 * support. Similarly, if host1x is already attached to an IOMMU (via
-	 * the DMA API), don't try to attach again.
+	 * We may not always want to enable IOMMU support (for example if the
+	 * host1x firewall is already enabled and we don't support addressing
+	 * more than 32 bits of physical memory), so check for that first.
+	 *
+	 * Similarly, if host1x is already attached to an IOMMU (via the DMA
+	 * API), don't try to attach again.
 	 */
-	if (IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL) || domain)
+	if (!host1x_wants_iommu(host) || domain)
 		return domain;
 
 	host->group = iommu_group_get(host->dev);
@@ -502,6 +540,19 @@ static void __exit tegra_host1x_exit(void)
 }
 module_exit(tegra_host1x_exit);
 
+/**
+ * host1x_get_dma_mask() - query the supported DMA mask for host1x
+ * @host1x: host1x instance
+ *
+ * Note that this returns the supported DMA mask for host1x, which can be
+ * different from the applicable DMA mask under certain circumstances.
+ */
+u64 host1x_get_dma_mask(struct host1x *host1x)
+{
+	return host1x->info->dma_mask;
+}
+EXPORT_SYMBOL(host1x_get_dma_mask);
+
 MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
 MODULE_AUTHOR("Terje Bergstrom <tbergstrom@nvidia.com>");
 MODULE_DESCRIPTION("Host1x driver for Tegra products");
diff --git a/drivers/greybus/arpc.h b/drivers/greybus/arpc.h
index c8b83c5cfa79..b9ea81b55b29 100644
--- a/drivers/greybus/arpc.h
+++ b/drivers/greybus/arpc.h
@@ -21,7 +21,7 @@ struct arpc_request_message {
 	__le16	id;		/* RPC unique id */
 	__le16	size;		/* Size in bytes of header + payload */
 	__u8	type;		/* RPC type */
-	__u8	data[0];	/* ARPC data */
+	__u8	data[];	/* ARPC data */
 } __packed;
 
 struct arpc_response_message {
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 7c89edbd6c5a..d54e7ae80de5 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -42,7 +42,7 @@ config HIDRAW
 	---help---
 	Say Y here if you want to support HID devices (from the USB
 	specification standpoint) that aren't strictly user interface
-	devices, like monitor controls and Uninterruptable Power Supplies.
+	devices, like monitor controls and Uninterruptible Power Supplies.
 
 	This module supports these devices separately using a separate
 	event interface on /dev/hidraw.
@@ -538,14 +538,14 @@ config HID_LOGITECH
 	Support for Logitech devices that are not fully compliant with HID standard.
 
 config HID_LOGITECH_DJ
-	tristate "Logitech Unifying receivers full support"
+	tristate "Logitech receivers full support"
 	depends on USB_HID
 	depends on HIDRAW
 	depends on HID_LOGITECH
 	select HID_LOGITECH_HIDPP
 	---help---
-	Say Y if you want support for Logitech Unifying receivers and devices.
-	Unifying receivers are capable of pairing up to 6 Logitech compliant
+	Say Y if you want support for Logitech receivers and devices.
+	Logitech receivers are capable of pairing multiple Logitech compliant
 	devices to the same receiver. Without this driver it will be handled by
 	generic USB_HID driver and all incoming events will be multiplexed
 	into a single mouse and a single keyboard device.
@@ -1140,7 +1140,7 @@ config HID_SENSOR_CUSTOM_SENSOR
 	  to decide how to interpret these special sensor ids and process in
 	  the user space. Currently some manufacturers are using these ids for
 	  sensor calibration and debugging other sensors. Manufacturers
-	  should't use these special custom sensor ids to export any of the
+	  shouldn't use these special custom sensor ids to export any of the
 	  standard sensors.
 	  Select this config option for custom/generic sensor support.
 
@@ -1155,6 +1155,7 @@ config HID_ALPS
 config HID_MCP2221
 	tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support"
 	depends on USB_HID && I2C
+	depends on GPIOLIB
 	---help---
 	Provides I2C and SMBUS host adapter functionality over USB-HID
 	through MCP2221 device.
diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c
index fa704153cb00..b2ad319a74b9 100644
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -802,6 +802,7 @@ static int alps_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		break;
 	case HID_DEVICE_ID_ALPS_U1_DUAL:
 	case HID_DEVICE_ID_ALPS_U1:
+	case HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY:
 		data->dev_type = U1;
 		break;
 	default:
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b18b13147a6f..7354fa79cb67 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -79,10 +79,10 @@
 #define HID_DEVICE_ID_ALPS_U1_DUAL_PTP	0x121F
 #define HID_DEVICE_ID_ALPS_U1_DUAL_3BTN_PTP	0x1220
 #define HID_DEVICE_ID_ALPS_U1		0x1215
+#define HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY         0x121E
 #define HID_DEVICE_ID_ALPS_T4_BTNLESS	0x120C
 #define HID_DEVICE_ID_ALPS_1222		0x1222
 
-
 #define USB_VENDOR_ID_AMI		0x046b
 #define USB_DEVICE_ID_AMI_VIRT_KEYBOARD_AND_MOUSE	0xff10
 
@@ -385,6 +385,7 @@
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7349	0x7349
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_73F7	0x73f7
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001	0xa001
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_C002	0xc002
 
 #define USB_VENDOR_ID_ELAN		0x04f3
 #define USB_DEVICE_ID_TOSHIBA_CLICK_L9W	0x0401
@@ -759,6 +760,7 @@
 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2	0xc218
 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2	0xc219
 #define USB_DEVICE_ID_LOGITECH_G15_LCD		0xc222
+#define USB_DEVICE_ID_LOGITECH_G11		0xc225
 #define USB_DEVICE_ID_LOGITECH_G15_V2_LCD	0xc227
 #define USB_DEVICE_ID_LOGITECH_G510		0xc22d
 #define USB_DEVICE_ID_LOGITECH_G510_USB_AUDIO	0xc22e
@@ -1097,6 +1099,9 @@
 #define USB_DEVICE_ID_SYMBOL_SCANNER_2	0x1300
 #define USB_DEVICE_ID_SYMBOL_SCANNER_3	0x1200
 
+#define I2C_VENDOR_ID_SYNAPTICS     0x06cb
+#define I2C_PRODUCT_ID_SYNAPTICS_SYNA2393   0x7a13
+
 #define USB_VENDOR_ID_SYNAPTICS		0x06cb
 #define USB_DEVICE_ID_SYNAPTICS_TP	0x0001
 #define USB_DEVICE_ID_SYNAPTICS_INT_TP	0x0002
diff --git a/drivers/hid/hid-lg-g15.c b/drivers/hid/hid-lg-g15.c
index ad4b5412a9f4..ef0cbcd7540d 100644
--- a/drivers/hid/hid-lg-g15.c
+++ b/drivers/hid/hid-lg-g15.c
@@ -872,6 +872,10 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
 }
 
 static const struct hid_device_id lg_g15_devices[] = {
+	/* The G11 is a G15 without the LCD, treat it as a G15 */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_G11),
+		.driver_data = LG_G15 },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
 			 USB_DEVICE_ID_LOGITECH_G15_LCD),
 		.driver_data = LG_G15 },
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index ed9b1c1f460d..48dff5d6b605 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  HID driver for Logitech Unifying receivers
+ *  HID driver for Logitech receivers
  *
  *  Copyright (c) 2011 Logitech
  */
@@ -701,7 +701,7 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
 			type_str, dj_hiddev->product);
 	} else {
 		snprintf(dj_hiddev->name, sizeof(dj_hiddev->name),
-			"Logitech Unifying Device. Wireless PID:%04x",
+			"Logitech Wireless Device PID:%04x",
 			dj_hiddev->product);
 	}
 
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 094f4f1b6555..1e1cf8eae649 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  HIDPP protocol for Logitech Unifying receivers
+ *  HIDPP protocol for Logitech receivers
  *
  *  Copyright (c) 2011 Logitech (c)
  *  Copyright (c) 2012-2013 Google (c)
diff --git a/drivers/hid/hid-mcp2221.c b/drivers/hid/hid-mcp2221.c
index d958475f8c81..e1b93ce32e01 100644
--- a/drivers/hid/hid-mcp2221.c
+++ b/drivers/hid/hid-mcp2221.c
@@ -15,6 +15,7 @@
 #include <linux/hid.h>
 #include <linux/hidraw.h>
 #include <linux/i2c.h>
+#include <linux/gpio/driver.h>
 #include "hid-ids.h"
 
 /* Commands codes in a raw output report */
@@ -27,6 +28,8 @@ enum {
 	MCP2221_I2C_PARAM_OR_STATUS	= 0x10,
 	MCP2221_I2C_SET_SPEED = 0x20,
 	MCP2221_I2C_CANCEL = 0x10,
+	MCP2221_GPIO_SET = 0x50,
+	MCP2221_GPIO_GET = 0x51,
 };
 
 /* Response codes in a raw input report */
@@ -42,6 +45,8 @@ enum {
 	MCP2221_I2C_WRADDRL_SEND = 0x21,
 	MCP2221_I2C_ADDR_NACK = 0x25,
 	MCP2221_I2C_READ_COMPL = 0x55,
+	MCP2221_ALT_F_NOT_GPIOV = 0xEE,
+	MCP2221_ALT_F_NOT_GPIOD = 0xEF,
 };
 
 /*
@@ -59,6 +64,9 @@ struct mcp2221 {
 	int rxbuf_idx;
 	int status;
 	u8 cur_i2c_clk_div;
+	struct gpio_chip *gc;
+	u8 gp_idx;
+	u8 gpio_dir;
 };
 
 /*
@@ -526,6 +534,110 @@ static const struct i2c_algorithm mcp_i2c_algo = {
 	.functionality = mcp_i2c_func,
 };
 
+static int mcp_gpio_get(struct gpio_chip *gc,
+				unsigned int offset)
+{
+	int ret;
+	struct mcp2221 *mcp = gpiochip_get_data(gc);
+
+	mcp->txbuf[0] = MCP2221_GPIO_GET;
+
+	mcp->gp_idx = (offset + 1) * 2;
+
+	mutex_lock(&mcp->lock);
+	ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+	mutex_unlock(&mcp->lock);
+
+	return ret;
+}
+
+static void mcp_gpio_set(struct gpio_chip *gc,
+				unsigned int offset, int value)
+{
+	struct mcp2221 *mcp = gpiochip_get_data(gc);
+
+	memset(mcp->txbuf, 0, 18);
+	mcp->txbuf[0] = MCP2221_GPIO_SET;
+
+	mcp->gp_idx = ((offset + 1) * 4) - 1;
+
+	mcp->txbuf[mcp->gp_idx - 1] = 1;
+	mcp->txbuf[mcp->gp_idx] = !!value;
+
+	mutex_lock(&mcp->lock);
+	mcp_send_data_req_status(mcp, mcp->txbuf, 18);
+	mutex_unlock(&mcp->lock);
+}
+
+static int mcp_gpio_dir_set(struct mcp2221 *mcp,
+				unsigned int offset, u8 val)
+{
+	memset(mcp->txbuf, 0, 18);
+	mcp->txbuf[0] = MCP2221_GPIO_SET;
+
+	mcp->gp_idx = (offset + 1) * 5;
+
+	mcp->txbuf[mcp->gp_idx - 1] = 1;
+	mcp->txbuf[mcp->gp_idx] = val;
+
+	return mcp_send_data_req_status(mcp, mcp->txbuf, 18);
+}
+
+static int mcp_gpio_direction_input(struct gpio_chip *gc,
+				unsigned int offset)
+{
+	int ret;
+	struct mcp2221 *mcp = gpiochip_get_data(gc);
+
+	mutex_lock(&mcp->lock);
+	ret = mcp_gpio_dir_set(mcp, offset, 0);
+	mutex_unlock(&mcp->lock);
+
+	return ret;
+}
+
+static int mcp_gpio_direction_output(struct gpio_chip *gc,
+				unsigned int offset, int value)
+{
+	int ret;
+	struct mcp2221 *mcp = gpiochip_get_data(gc);
+
+	mutex_lock(&mcp->lock);
+	ret = mcp_gpio_dir_set(mcp, offset, 1);
+	mutex_unlock(&mcp->lock);
+
+	/* Can't configure as output, bailout early */
+	if (ret)
+		return ret;
+
+	mcp_gpio_set(gc, offset, value);
+
+	return 0;
+}
+
+static int mcp_gpio_get_direction(struct gpio_chip *gc,
+				unsigned int offset)
+{
+	int ret;
+	struct mcp2221 *mcp = gpiochip_get_data(gc);
+
+	mcp->txbuf[0] = MCP2221_GPIO_GET;
+
+	mcp->gp_idx = (offset + 1) * 2;
+
+	mutex_lock(&mcp->lock);
+	ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+	mutex_unlock(&mcp->lock);
+
+	if (ret)
+		return ret;
+
+	if (mcp->gpio_dir)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
 /* Gives current state of i2c engine inside mcp2221 */
 static int mcp_get_i2c_eng_state(struct mcp2221 *mcp,
 				u8 *data, u8 idx)
@@ -638,6 +750,39 @@ static int mcp2221_raw_event(struct hid_device *hdev,
 		complete(&mcp->wait_in_report);
 		break;
 
+	case MCP2221_GPIO_GET:
+		switch (data[1]) {
+		case MCP2221_SUCCESS:
+			if ((data[mcp->gp_idx] == MCP2221_ALT_F_NOT_GPIOV) ||
+				(data[mcp->gp_idx + 1] == MCP2221_ALT_F_NOT_GPIOD)) {
+				mcp->status = -ENOENT;
+			} else {
+				mcp->status = !!data[mcp->gp_idx];
+				mcp->gpio_dir = !!data[mcp->gp_idx + 1];
+			}
+			break;
+		default:
+			mcp->status = -EAGAIN;
+		}
+		complete(&mcp->wait_in_report);
+		break;
+
+	case MCP2221_GPIO_SET:
+		switch (data[1]) {
+		case MCP2221_SUCCESS:
+			if ((data[mcp->gp_idx] == MCP2221_ALT_F_NOT_GPIOV) ||
+				(data[mcp->gp_idx - 1] == MCP2221_ALT_F_NOT_GPIOV)) {
+				mcp->status = -ENOENT;
+			} else {
+				mcp->status = 0;
+			}
+			break;
+		default:
+			mcp->status = -EAGAIN;
+		}
+		complete(&mcp->wait_in_report);
+		break;
+
 	default:
 		mcp->status = -EIO;
 		complete(&mcp->wait_in_report);
@@ -702,8 +847,32 @@ static int mcp2221_probe(struct hid_device *hdev,
 	}
 	i2c_set_adapdata(&mcp->adapter, mcp);
 
+	/* Setup GPIO chip */
+	mcp->gc = devm_kzalloc(&hdev->dev, sizeof(*mcp->gc), GFP_KERNEL);
+	if (!mcp->gc) {
+		ret = -ENOMEM;
+		goto err_gc;
+	}
+
+	mcp->gc->label = "mcp2221_gpio";
+	mcp->gc->direction_input = mcp_gpio_direction_input;
+	mcp->gc->direction_output = mcp_gpio_direction_output;
+	mcp->gc->get_direction = mcp_gpio_get_direction;
+	mcp->gc->set = mcp_gpio_set;
+	mcp->gc->get = mcp_gpio_get;
+	mcp->gc->ngpio = 4;
+	mcp->gc->base = -1;
+	mcp->gc->can_sleep = 1;
+	mcp->gc->parent = &hdev->dev;
+
+	ret = devm_gpiochip_add_data(&hdev->dev, mcp->gc, mcp);
+	if (ret)
+		goto err_gc;
+
 	return 0;
 
+err_gc:
+	i2c_del_adapter(&mcp->adapter);
 err_i2c:
 	hid_hw_close(mcp->hdev);
 err_hstop:
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 362805ddf377..03c720b47306 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1922,6 +1922,9 @@ static const struct hid_device_id mt_devices[] = {
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
+	{ .driver_data = MT_CLS_EGALAX,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_C002) },
 
 	/* Elitegroup panel */
 	{ .driver_data = MT_CLS_SERIAL,
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 009000c5d55c..294c84e136d7 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -177,6 +177,8 @@ static const struct i2c_hid_quirks {
 		 I2C_HID_QUIRK_BOGUS_IRQ },
 	{ USB_VENDOR_ID_ALPS_JP, HID_ANY_ID,
 		 I2C_HID_QUIRK_RESET_ON_RESUME },
+	{ I2C_VENDOR_ID_SYNAPTICS, I2C_PRODUCT_ID_SYNAPTICS_SYNA2393,
+		 I2C_HID_QUIRK_RESET_ON_RESUME },
 	{ USB_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_LENOVO_LEGION_Y720,
 		I2C_HID_QUIRK_BAD_INPUT_SIZE },
 	{ 0, 0 }
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index c7bc9db5b192..17a638f15082 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -682,16 +682,21 @@ static int usbhid_open(struct hid_device *hid)
 	struct usbhid_device *usbhid = hid->driver_data;
 	int res;
 
+	mutex_lock(&usbhid->mutex);
+
 	set_bit(HID_OPENED, &usbhid->iofl);
 
-	if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
-		return 0;
+	if (hid->quirks & HID_QUIRK_ALWAYS_POLL) {
+		res = 0;
+		goto Done;
+	}
 
 	res = usb_autopm_get_interface(usbhid->intf);
 	/* the device must be awake to reliably request remote wakeup */
 	if (res < 0) {
 		clear_bit(HID_OPENED, &usbhid->iofl);
-		return -EIO;
+		res = -EIO;
+		goto Done;
 	}
 
 	usbhid->intf->needs_remote_wakeup = 1;
@@ -725,6 +730,9 @@ static int usbhid_open(struct hid_device *hid)
 		msleep(50);
 
 	clear_bit(HID_RESUME_RUNNING, &usbhid->iofl);
+
+ Done:
+	mutex_unlock(&usbhid->mutex);
 	return res;
 }
 
@@ -732,6 +740,8 @@ static void usbhid_close(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
 
+	mutex_lock(&usbhid->mutex);
+
 	/*
 	 * Make sure we don't restart data acquisition due to
 	 * a resumption we no longer care about by avoiding racing
@@ -743,12 +753,13 @@ static void usbhid_close(struct hid_device *hid)
 		clear_bit(HID_IN_POLLING, &usbhid->iofl);
 	spin_unlock_irq(&usbhid->lock);
 
-	if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
-		return;
+	if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) {
+		hid_cancel_delayed_stuff(usbhid);
+		usb_kill_urb(usbhid->urbin);
+		usbhid->intf->needs_remote_wakeup = 0;
+	}
 
-	hid_cancel_delayed_stuff(usbhid);
-	usb_kill_urb(usbhid->urbin);
-	usbhid->intf->needs_remote_wakeup = 0;
+	mutex_unlock(&usbhid->mutex);
 }
 
 /*
@@ -1057,6 +1068,8 @@ static int usbhid_start(struct hid_device *hid)
 	unsigned int n, insize = 0;
 	int ret;
 
+	mutex_lock(&usbhid->mutex);
+
 	clear_bit(HID_DISCONNECTED, &usbhid->iofl);
 
 	usbhid->bufsize = HID_MIN_BUFFER_SIZE;
@@ -1177,6 +1190,8 @@ static int usbhid_start(struct hid_device *hid)
 		usbhid_set_leds(hid);
 		device_set_wakeup_enable(&dev->dev, 1);
 	}
+
+	mutex_unlock(&usbhid->mutex);
 	return 0;
 
 fail:
@@ -1187,6 +1202,7 @@ static int usbhid_start(struct hid_device *hid)
 	usbhid->urbout = NULL;
 	usbhid->urbctrl = NULL;
 	hid_free_buffers(dev, hid);
+	mutex_unlock(&usbhid->mutex);
 	return ret;
 }
 
@@ -1202,6 +1218,8 @@ static void usbhid_stop(struct hid_device *hid)
 		usbhid->intf->needs_remote_wakeup = 0;
 	}
 
+	mutex_lock(&usbhid->mutex);
+
 	clear_bit(HID_STARTED, &usbhid->iofl);
 	spin_lock_irq(&usbhid->lock);	/* Sync with error and led handlers */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);
@@ -1222,6 +1240,8 @@ static void usbhid_stop(struct hid_device *hid)
 	usbhid->urbout = NULL;
 
 	hid_free_buffers(hid_to_usb_dev(hid), hid);
+
+	mutex_unlock(&usbhid->mutex);
 }
 
 static int usbhid_power(struct hid_device *hid, int lvl)
@@ -1382,6 +1402,7 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *
 	INIT_WORK(&usbhid->reset_work, hid_reset);
 	timer_setup(&usbhid->io_retry, hid_retry_timeout, 0);
 	spin_lock_init(&usbhid->lock);
+	mutex_init(&usbhid->mutex);
 
 	ret = hid_add_device(hid);
 	if (ret) {
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 8620408bd7af..75fe85d3d27a 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -80,6 +80,7 @@ struct usbhid_device {
 	dma_addr_t outbuf_dma;                                          /* Output buffer dma */
 	unsigned long last_out;							/* record of last output for timeouts */
 
+	struct mutex mutex;						/* start/stop/open/close */
 	spinlock_t lock;						/* fifo spinlock */
 	unsigned long iofl;                                             /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
 	struct timer_list io_retry;                                     /* Retry timer */
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 5ded94b7bf68..cd71e7133944 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -319,9 +319,11 @@ static void wacom_feature_mapping(struct hid_device *hdev,
 			data[0] = field->report->id;
 			ret = wacom_get_report(hdev, HID_FEATURE_REPORT,
 					       data, n, WAC_CMD_RETRIES);
-			if (ret == n) {
+			if (ret == n && features->type == HID_GENERIC) {
 				ret = hid_report_raw_event(hdev,
 					HID_FEATURE_REPORT, data, n, 0);
+			} else if (ret == 2 && features->type != HID_GENERIC) {
+				features->touch_max = data[1];
 			} else {
 				features->touch_max = 16;
 				hid_warn(hdev, "wacom_feature_mapping: "
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index d99a9d407671..1c96809b51c9 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1427,11 +1427,13 @@ static void wacom_intuos_pro2_bt_pad(struct wacom_wac *wacom)
 {
 	struct input_dev *pad_input = wacom->pad_input;
 	unsigned char *data = wacom->data;
+	int nbuttons = wacom->features.numbered_buttons;
 
-	int buttons = data[282] | ((data[281] & 0x40) << 2);
+	int expresskeys = data[282];
+	int center = (data[281] & 0x40) >> 6;
 	int ring = data[285] & 0x7F;
 	bool ringstatus = data[285] & 0x80;
-	bool prox = buttons || ringstatus;
+	bool prox = expresskeys || center || ringstatus;
 
 	/* Fix touchring data: userspace expects 0 at left and increasing clockwise */
 	ring = 71 - ring;
@@ -1439,7 +1441,8 @@ static void wacom_intuos_pro2_bt_pad(struct wacom_wac *wacom)
 	if (ring > 71)
 		ring -= 72;
 
-	wacom_report_numbered_buttons(pad_input, 9, buttons);
+	wacom_report_numbered_buttons(pad_input, nbuttons,
+                                      expresskeys | (center << (nbuttons - 1)));
 
 	input_report_abs(pad_input, ABS_WHEEL, ringstatus ? ring : 0);
 
@@ -2637,9 +2640,25 @@ static void wacom_wac_finger_pre_report(struct hid_device *hdev,
 			case HID_DG_TIPSWITCH:
 				hid_data->last_slot_field = equivalent_usage;
 				break;
+			case HID_DG_CONTACTCOUNT:
+				hid_data->cc_report = report->id;
+				hid_data->cc_index = i;
+				hid_data->cc_value_index = j;
+				break;
 			}
 		}
 	}
+
+	if (hid_data->cc_report != 0 &&
+	    hid_data->cc_index >= 0) {
+		struct hid_field *field = report->field[hid_data->cc_index];
+		int value = field->value[hid_data->cc_value_index];
+		if (value)
+			hid_data->num_expected = value;
+	}
+	else {
+		hid_data->num_expected = wacom_wac->features.touch_max;
+	}
 }
 
 static void wacom_wac_finger_report(struct hid_device *hdev,
@@ -2649,7 +2668,6 @@ static void wacom_wac_finger_report(struct hid_device *hdev,
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
 	struct input_dev *input = wacom_wac->touch_input;
 	unsigned touch_max = wacom_wac->features.touch_max;
-	struct hid_data *hid_data = &wacom_wac->hid_data;
 
 	/* If more packets of data are expected, give us a chance to
 	 * process them rather than immediately syncing a partial
@@ -2663,7 +2681,6 @@ static void wacom_wac_finger_report(struct hid_device *hdev,
 
 	input_sync(input);
 	wacom_wac->hid_data.num_received = 0;
-	hid_data->num_expected = 0;
 
 	/* keep touch state for pen event */
 	wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(wacom_wac);
@@ -2738,73 +2755,12 @@ static void wacom_report_events(struct hid_device *hdev,
 	}
 }
 
-static void wacom_set_num_expected(struct hid_device *hdev,
-				   struct hid_report *report,
-				   int collection_index,
-				   struct hid_field *field,
-				   int field_index)
-{
-	struct wacom *wacom = hid_get_drvdata(hdev);
-	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
-	struct hid_data *hid_data = &wacom_wac->hid_data;
-	unsigned int original_collection_level =
-		hdev->collection[collection_index].level;
-	bool end_collection = false;
-	int i;
-
-	if (hid_data->num_expected)
-		return;
-
-	// find the contact count value for this segment
-	for (i = field_index; i < report->maxfield && !end_collection; i++) {
-		struct hid_field *field = report->field[i];
-		unsigned int field_level =
-			hdev->collection[field->usage[0].collection_index].level;
-		unsigned int j;
-
-		if (field_level != original_collection_level)
-			continue;
-
-		for (j = 0; j < field->maxusage; j++) {
-			struct hid_usage *usage = &field->usage[j];
-
-			if (usage->collection_index != collection_index) {
-				end_collection = true;
-				break;
-			}
-			if (wacom_equivalent_usage(usage->hid) == HID_DG_CONTACTCOUNT) {
-				hid_data->cc_report = report->id;
-				hid_data->cc_index = i;
-				hid_data->cc_value_index = j;
-
-				if (hid_data->cc_report != 0 &&
-				    hid_data->cc_index >= 0) {
-
-					struct hid_field *field =
-						report->field[hid_data->cc_index];
-					int value =
-						field->value[hid_data->cc_value_index];
-
-					if (value)
-						hid_data->num_expected = value;
-				}
-			}
-		}
-	}
-
-	if (hid_data->cc_report == 0 || hid_data->cc_index < 0)
-		hid_data->num_expected = wacom_wac->features.touch_max;
-}
-
 static int wacom_wac_collection(struct hid_device *hdev, struct hid_report *report,
 			 int collection_index, struct hid_field *field,
 			 int field_index)
 {
 	struct wacom *wacom = hid_get_drvdata(hdev);
 
-	if (WACOM_FINGER_FIELD(field))
-		wacom_set_num_expected(hdev, report, collection_index, field,
-				       field_index);
 	wacom_report_events(hdev, report, collection_index, field_index);
 
 	/*
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 23f358cb7f49..90070b337c10 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -289,6 +289,34 @@ int vmbus_send_tl_connect_request(const guid_t *shv_guest_servie_id,
 }
 EXPORT_SYMBOL_GPL(vmbus_send_tl_connect_request);
 
+/*
+ * Set/change the vCPU (@target_vp) the channel (@child_relid) will interrupt.
+ *
+ * CHANNELMSG_MODIFYCHANNEL messages are aynchronous.  Also, Hyper-V does not
+ * ACK such messages.  IOW we can't know when the host will stop interrupting
+ * the "old" vCPU and start interrupting the "new" vCPU for the given channel.
+ *
+ * The CHANNELMSG_MODIFYCHANNEL message type is supported since VMBus version
+ * VERSION_WIN10_V4_1.
+ */
+int vmbus_send_modifychannel(u32 child_relid, u32 target_vp)
+{
+	struct vmbus_channel_modifychannel conn_msg;
+	int ret;
+
+	memset(&conn_msg, 0, sizeof(conn_msg));
+	conn_msg.header.msgtype = CHANNELMSG_MODIFYCHANNEL;
+	conn_msg.child_relid = child_relid;
+	conn_msg.target_vp = target_vp;
+
+	ret = vmbus_post_msg(&conn_msg, sizeof(conn_msg), true);
+
+	trace_vmbus_send_modifychannel(&conn_msg, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(vmbus_send_modifychannel);
+
 /*
  * create_gpadl_header - Creates a gpadl for the specified buffer
  */
@@ -594,35 +622,31 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
 }
 EXPORT_SYMBOL_GPL(vmbus_teardown_gpadl);
 
-static void reset_channel_cb(void *arg)
-{
-	struct vmbus_channel *channel = arg;
-
-	channel->onchannel_callback = NULL;
-}
-
 void vmbus_reset_channel_cb(struct vmbus_channel *channel)
 {
+	unsigned long flags;
+
 	/*
 	 * vmbus_on_event(), running in the per-channel tasklet, can race
 	 * with vmbus_close_internal() in the case of SMP guest, e.g., when
 	 * the former is accessing channel->inbound.ring_buffer, the latter
 	 * could be freeing the ring_buffer pages, so here we must stop it
 	 * first.
+	 *
+	 * vmbus_chan_sched() might call the netvsc driver callback function
+	 * that ends up scheduling NAPI work that accesses the ring buffer.
+	 * At this point, we have to ensure that any such work is completed
+	 * and that the channel ring buffer is no longer being accessed, cf.
+	 * the calls to napi_disable() in netvsc_device_remove().
 	 */
 	tasklet_disable(&channel->callback_event);
 
-	channel->sc_creation_callback = NULL;
+	/* See the inline comments in vmbus_chan_sched(). */
+	spin_lock_irqsave(&channel->sched_lock, flags);
+	channel->onchannel_callback = NULL;
+	spin_unlock_irqrestore(&channel->sched_lock, flags);
 
-	/* Stop the callback asap */
-	if (channel->target_cpu != get_cpu()) {
-		put_cpu();
-		smp_call_function_single(channel->target_cpu, reset_channel_cb,
-					 channel, true);
-	} else {
-		reset_channel_cb(channel);
-		put_cpu();
-	}
+	channel->sc_creation_callback = NULL;
 
 	/* Re-enable tasklet for use on re-open */
 	tasklet_enable(&channel->callback_event);
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 501c43c5851d..fde806d6525b 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
+#include <linux/cpu.h>
 #include <linux/hyperv.h>
 #include <asm/mshyperv.h>
 
@@ -315,11 +316,11 @@ static struct vmbus_channel *alloc_channel(void)
 	if (!channel)
 		return NULL;
 
+	spin_lock_init(&channel->sched_lock);
 	spin_lock_init(&channel->lock);
 	init_completion(&channel->rescind_event);
 
 	INIT_LIST_HEAD(&channel->sc_list);
-	INIT_LIST_HEAD(&channel->percpu_list);
 
 	tasklet_init(&channel->callback_event,
 		     vmbus_on_event, (unsigned long)channel);
@@ -340,23 +341,49 @@ static void free_channel(struct vmbus_channel *channel)
 	kobject_put(&channel->kobj);
 }
 
-static void percpu_channel_enq(void *arg)
+void vmbus_channel_map_relid(struct vmbus_channel *channel)
 {
-	struct vmbus_channel *channel = arg;
-	struct hv_per_cpu_context *hv_cpu
-		= this_cpu_ptr(hv_context.cpu_context);
-
-	list_add_tail_rcu(&channel->percpu_list, &hv_cpu->chan_list);
+	if (WARN_ON(channel->offermsg.child_relid >= MAX_CHANNEL_RELIDS))
+		return;
+	/*
+	 * The mapping of the channel's relid is visible from the CPUs that
+	 * execute vmbus_chan_sched() by the time that vmbus_chan_sched() will
+	 * execute:
+	 *
+	 *  (a) In the "normal (i.e., not resuming from hibernation)" path,
+	 *      the full barrier in smp_store_mb() guarantees that the store
+	 *      is propagated to all CPUs before the add_channel_work work
+	 *      is queued.  In turn, add_channel_work is queued before the
+	 *      channel's ring buffer is allocated/initialized and the
+	 *      OPENCHANNEL message for the channel is sent in vmbus_open().
+	 *      Hyper-V won't start sending the interrupts for the channel
+	 *      before the OPENCHANNEL message is acked.  The memory barrier
+	 *      in vmbus_chan_sched() -> sync_test_and_clear_bit() ensures
+	 *      that vmbus_chan_sched() must find the channel's relid in
+	 *      recv_int_page before retrieving the channel pointer from the
+	 *      array of channels.
+	 *
+	 *  (b) In the "resuming from hibernation" path, the smp_store_mb()
+	 *      guarantees that the store is propagated to all CPUs before
+	 *      the VMBus connection is marked as ready for the resume event
+	 *      (cf. check_ready_for_resume_event()).  The interrupt handler
+	 *      of the VMBus driver and vmbus_chan_sched() can not run before
+	 *      vmbus_bus_resume() has completed execution (cf. resume_noirq).
+	 */
+	smp_store_mb(
+		vmbus_connection.channels[channel->offermsg.child_relid],
+		channel);
 }
 
-static void percpu_channel_deq(void *arg)
+void vmbus_channel_unmap_relid(struct vmbus_channel *channel)
 {
-	struct vmbus_channel *channel = arg;
-
-	list_del_rcu(&channel->percpu_list);
+	if (WARN_ON(channel->offermsg.child_relid >= MAX_CHANNEL_RELIDS))
+		return;
+	WRITE_ONCE(
+		vmbus_connection.channels[channel->offermsg.child_relid],
+		NULL);
 }
 
-
 static void vmbus_release_relid(u32 relid)
 {
 	struct vmbus_channel_relid_released msg;
@@ -373,40 +400,37 @@ static void vmbus_release_relid(u32 relid)
 
 void hv_process_channel_removal(struct vmbus_channel *channel)
 {
-	struct vmbus_channel *primary_channel;
 	unsigned long flags;
 
-	BUG_ON(!mutex_is_locked(&vmbus_connection.channel_mutex));
+	lockdep_assert_held(&vmbus_connection.channel_mutex);
 	BUG_ON(!channel->rescind);
 
-	if (channel->target_cpu != get_cpu()) {
-		put_cpu();
-		smp_call_function_single(channel->target_cpu,
-					 percpu_channel_deq, channel, true);
-	} else {
-		percpu_channel_deq(channel);
-		put_cpu();
-	}
+	/*
+	 * hv_process_channel_removal() could find INVALID_RELID only for
+	 * hv_sock channels.  See the inline comments in vmbus_onoffer().
+	 */
+	WARN_ON(channel->offermsg.child_relid == INVALID_RELID &&
+		!is_hvsock_channel(channel));
+
+	/*
+	 * Upon suspend, an in-use hv_sock channel is removed from the array of
+	 * channels and the relid is invalidated.  After hibernation, when the
+	 * user-space appplication destroys the channel, it's unnecessary and
+	 * unsafe to remove the channel from the array of channels.  See also
+	 * the inline comments before the call of vmbus_release_relid() below.
+	 */
+	if (channel->offermsg.child_relid != INVALID_RELID)
+		vmbus_channel_unmap_relid(channel);
 
 	if (channel->primary_channel == NULL) {
 		list_del(&channel->listentry);
-
-		primary_channel = channel;
 	} else {
-		primary_channel = channel->primary_channel;
+		struct vmbus_channel *primary_channel = channel->primary_channel;
 		spin_lock_irqsave(&primary_channel->lock, flags);
 		list_del(&channel->sc_list);
 		spin_unlock_irqrestore(&primary_channel->lock, flags);
 	}
 
-	/*
-	 * We need to free the bit for init_vp_index() to work in the case
-	 * of sub-channel, when we reload drivers like hv_netvsc.
-	 */
-	if (channel->affinity_policy == HV_LOCALIZED)
-		cpumask_clear_cpu(channel->target_cpu,
-				  &primary_channel->alloced_cpus_in_node);
-
 	/*
 	 * Upon suspend, an in-use hv_sock channel is marked as "rescinded" and
 	 * the relid is invalidated; after hibernation, when the user-space app
@@ -440,23 +464,8 @@ static void vmbus_add_channel_work(struct work_struct *work)
 		container_of(work, struct vmbus_channel, add_channel_work);
 	struct vmbus_channel *primary_channel = newchannel->primary_channel;
 	unsigned long flags;
-	u16 dev_type;
 	int ret;
 
-	dev_type = hv_get_dev_type(newchannel);
-
-	init_vp_index(newchannel, dev_type);
-
-	if (newchannel->target_cpu != get_cpu()) {
-		put_cpu();
-		smp_call_function_single(newchannel->target_cpu,
-					 percpu_channel_enq,
-					 newchannel, true);
-	} else {
-		percpu_channel_enq(newchannel);
-		put_cpu();
-	}
-
 	/*
 	 * This state is used to indicate a successful open
 	 * so that when we do close the channel normally, we
@@ -488,7 +497,7 @@ static void vmbus_add_channel_work(struct work_struct *work)
 	if (!newchannel->device_obj)
 		goto err_deq_chan;
 
-	newchannel->device_obj->device_id = dev_type;
+	newchannel->device_obj->device_id = hv_get_dev_type(newchannel);
 	/*
 	 * Add the new device to the bus. This will kick off device-driver
 	 * binding which eventually invokes the device driver's AddDevice()
@@ -523,17 +532,10 @@ static void vmbus_add_channel_work(struct work_struct *work)
 		spin_unlock_irqrestore(&primary_channel->lock, flags);
 	}
 
-	mutex_unlock(&vmbus_connection.channel_mutex);
+	/* vmbus_process_offer() has mapped the channel. */
+	vmbus_channel_unmap_relid(newchannel);
 
-	if (newchannel->target_cpu != get_cpu()) {
-		put_cpu();
-		smp_call_function_single(newchannel->target_cpu,
-					 percpu_channel_deq,
-					 newchannel, true);
-	} else {
-		percpu_channel_deq(newchannel);
-		put_cpu();
-	}
+	mutex_unlock(&vmbus_connection.channel_mutex);
 
 	vmbus_release_relid(newchannel->offermsg.child_relid);
 
@@ -551,6 +553,25 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 	unsigned long flags;
 	bool fnew = true;
 
+	/*
+	 * Initialize the target_CPU before inserting the channel in
+	 * the chn_list and sc_list lists, within the channel_mutex
+	 * critical section:
+	 *
+	 * CPU1				CPU2
+	 *
+	 * [vmbus_process_offer()]	[hv_syninc_cleanup()]
+	 *
+	 * STORE target_cpu		LOCK channel_mutex
+	 * LOCK channel_mutex		SEARCH chn_list
+	 * INSERT chn_list		LOAD target_cpu
+	 * UNLOCK channel_mutex		UNLOCK channel_mutex
+	 *
+	 * Forbids: CPU2's SEARCH from seeing CPU1's INSERT &&
+	 * 		CPU2's LOAD from *not* seing CPU1's STORE
+	 */
+	init_vp_index(newchannel, hv_get_dev_type(newchannel));
+
 	mutex_lock(&vmbus_connection.channel_mutex);
 
 	/* Remember the channels that should be cleaned up upon suspend. */
@@ -599,6 +620,8 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 		spin_unlock_irqrestore(&channel->lock, flags);
 	}
 
+	vmbus_channel_map_relid(newchannel);
+
 	mutex_unlock(&vmbus_connection.channel_mutex);
 
 	/*
@@ -643,62 +666,64 @@ static DEFINE_SPINLOCK(bind_channel_to_cpu_lock);
 /*
  * Starting with Win8, we can statically distribute the incoming
  * channel interrupt load by binding a channel to VCPU.
- * We distribute the interrupt loads to one or more NUMA nodes based on
- * the channel's affinity_policy.
  *
  * For pre-win8 hosts or non-performance critical channels we assign the
- * first CPU in the first NUMA node.
+ * VMBUS_CONNECT_CPU.
+ *
+ * Starting with win8, performance critical channels will be distributed
+ * evenly among all the available NUMA nodes.  Once the node is assigned,
+ * we will assign the CPU based on a simple round robin scheme.
  */
 static void init_vp_index(struct vmbus_channel *channel, u16 dev_type)
 {
-	u32 cur_cpu;
 	bool perf_chn = vmbus_devs[dev_type].perf_device;
-	struct vmbus_channel *primary = channel->primary_channel;
-	int next_node;
 	cpumask_var_t available_mask;
 	struct cpumask *alloced_mask;
+	u32 target_cpu;
+	int numa_node;
 
 	if ((vmbus_proto_version == VERSION_WS2008) ||
 	    (vmbus_proto_version == VERSION_WIN7) || (!perf_chn) ||
 	    !alloc_cpumask_var(&available_mask, GFP_KERNEL)) {
 		/*
 		 * Prior to win8, all channel interrupts are
-		 * delivered on cpu 0.
+		 * delivered on VMBUS_CONNECT_CPU.
 		 * Also if the channel is not a performance critical
-		 * channel, bind it to cpu 0.
-		 * In case alloc_cpumask_var() fails, bind it to cpu 0.
+		 * channel, bind it to VMBUS_CONNECT_CPU.
+		 * In case alloc_cpumask_var() fails, bind it to
+		 * VMBUS_CONNECT_CPU.
 		 */
-		channel->numa_node = 0;
-		channel->target_cpu = 0;
-		channel->target_vp = hv_cpu_number_to_vp_number(0);
+		channel->numa_node = cpu_to_node(VMBUS_CONNECT_CPU);
+		channel->target_cpu = VMBUS_CONNECT_CPU;
+		channel->target_vp =
+			hv_cpu_number_to_vp_number(VMBUS_CONNECT_CPU);
 		return;
 	}
 
-	spin_lock(&bind_channel_to_cpu_lock);
+	/* No CPUs can come up or down during this. */
+	cpus_read_lock();
 
 	/*
-	 * Based on the channel affinity policy, we will assign the NUMA
-	 * nodes.
+	 * Serializes the accesses to the global variable next_numa_node_id.
+	 * See also the header comment of the spin lock declaration.
 	 */
+	spin_lock(&bind_channel_to_cpu_lock);
 
-	if ((channel->affinity_policy == HV_BALANCED) || (!primary)) {
-		while (true) {
-			next_node = next_numa_node_id++;
-			if (next_node == nr_node_ids) {
-				next_node = next_numa_node_id = 0;
-				continue;
-			}
-			if (cpumask_empty(cpumask_of_node(next_node)))
-				continue;
-			break;
+	while (true) {
+		numa_node = next_numa_node_id++;
+		if (numa_node == nr_node_ids) {
+			next_numa_node_id = 0;
+			continue;
 		}
-		channel->numa_node = next_node;
-		primary = channel;
+		if (cpumask_empty(cpumask_of_node(numa_node)))
+			continue;
+		break;
 	}
-	alloced_mask = &hv_context.hv_numa_map[primary->numa_node];
+	channel->numa_node = numa_node;
+	alloced_mask = &hv_context.hv_numa_map[numa_node];
 
 	if (cpumask_weight(alloced_mask) ==
-	    cpumask_weight(cpumask_of_node(primary->numa_node))) {
+	    cpumask_weight(cpumask_of_node(numa_node))) {
 		/*
 		 * We have cycled through all the CPUs in the node;
 		 * reset the alloced map.
@@ -706,59 +731,16 @@ static void init_vp_index(struct vmbus_channel *channel, u16 dev_type)
 		cpumask_clear(alloced_mask);
 	}
 
-	cpumask_xor(available_mask, alloced_mask,
-		    cpumask_of_node(primary->numa_node));
+	cpumask_xor(available_mask, alloced_mask, cpumask_of_node(numa_node));
 
-	cur_cpu = -1;
-
-	if (primary->affinity_policy == HV_LOCALIZED) {
-		/*
-		 * Normally Hyper-V host doesn't create more subchannels
-		 * than there are VCPUs on the node but it is possible when not
-		 * all present VCPUs on the node are initialized by guest.
-		 * Clear the alloced_cpus_in_node to start over.
-		 */
-		if (cpumask_equal(&primary->alloced_cpus_in_node,
-				  cpumask_of_node(primary->numa_node)))
-			cpumask_clear(&primary->alloced_cpus_in_node);
-	}
+	target_cpu = cpumask_first(available_mask);
+	cpumask_set_cpu(target_cpu, alloced_mask);
 
-	while (true) {
-		cur_cpu = cpumask_next(cur_cpu, available_mask);
-		if (cur_cpu >= nr_cpu_ids) {
-			cur_cpu = -1;
-			cpumask_copy(available_mask,
-				     cpumask_of_node(primary->numa_node));
-			continue;
-		}
-
-		if (primary->affinity_policy == HV_LOCALIZED) {
-			/*
-			 * NOTE: in the case of sub-channel, we clear the
-			 * sub-channel related bit(s) in
-			 * primary->alloced_cpus_in_node in
-			 * hv_process_channel_removal(), so when we
-			 * reload drivers like hv_netvsc in SMP guest, here
-			 * we're able to re-allocate
-			 * bit from primary->alloced_cpus_in_node.
-			 */
-			if (!cpumask_test_cpu(cur_cpu,
-					      &primary->alloced_cpus_in_node)) {
-				cpumask_set_cpu(cur_cpu,
-						&primary->alloced_cpus_in_node);
-				cpumask_set_cpu(cur_cpu, alloced_mask);
-				break;
-			}
-		} else {
-			cpumask_set_cpu(cur_cpu, alloced_mask);
-			break;
-		}
-	}
-
-	channel->target_cpu = cur_cpu;
-	channel->target_vp = hv_cpu_number_to_vp_number(cur_cpu);
+	channel->target_cpu = target_cpu;
+	channel->target_vp = hv_cpu_number_to_vp_number(target_cpu);
 
 	spin_unlock(&bind_channel_to_cpu_lock);
+	cpus_read_unlock();
 
 	free_cpumask_var(available_mask);
 }
@@ -940,8 +922,6 @@ static void vmbus_onoffer(struct vmbus_channel_message_header *hdr)
 	oldchannel = find_primary_channel_by_offer(offer);
 
 	if (oldchannel != NULL) {
-		atomic_dec(&vmbus_connection.offer_in_progress);
-
 		/*
 		 * We're resuming from hibernation: all the sub-channel and
 		 * hv_sock channels we had before the hibernation should have
@@ -949,36 +929,65 @@ static void vmbus_onoffer(struct vmbus_channel_message_header *hdr)
 		 * primary channel that we had before the hibernation.
 		 */
 
+		/*
+		 * { Initially: channel relid = INVALID_RELID,
+		 *		channels[valid_relid] = NULL }
+		 *
+		 * CPU1					CPU2
+		 *
+		 * [vmbus_onoffer()]			[vmbus_device_release()]
+		 *
+		 * LOCK channel_mutex			LOCK channel_mutex
+		 * STORE channel relid = valid_relid	LOAD r1 = channel relid
+		 * MAP_RELID channel			if (r1 != INVALID_RELID)
+		 * UNLOCK channel_mutex			  UNMAP_RELID channel
+		 *					UNLOCK channel_mutex
+		 *
+		 * Forbids: r1 == valid_relid &&
+		 * 		channels[valid_relid] == channel
+		 *
+		 * Note.  r1 can be INVALID_RELID only for an hv_sock channel.
+		 * None of the hv_sock channels which were present before the
+		 * suspend are re-offered upon the resume.  See the WARN_ON()
+		 * in hv_process_channel_removal().
+		 */
+		mutex_lock(&vmbus_connection.channel_mutex);
+
+		atomic_dec(&vmbus_connection.offer_in_progress);
+
 		WARN_ON(oldchannel->offermsg.child_relid != INVALID_RELID);
 		/* Fix up the relid. */
 		oldchannel->offermsg.child_relid = offer->child_relid;
 
 		offer_sz = sizeof(*offer);
-		if (memcmp(offer, &oldchannel->offermsg, offer_sz) == 0) {
-			check_ready_for_resume_event();
-			return;
+		if (memcmp(offer, &oldchannel->offermsg, offer_sz) != 0) {
+			/*
+			 * This is not an error, since the host can also change
+			 * the other field(s) of the offer, e.g. on WS RS5
+			 * (Build 17763), the offer->connection_id of the
+			 * Mellanox VF vmbus device can change when the host
+			 * reoffers the device upon resume.
+			 */
+			pr_debug("vmbus offer changed: relid=%d\n",
+				 offer->child_relid);
+
+			print_hex_dump_debug("Old vmbus offer: ",
+					     DUMP_PREFIX_OFFSET, 16, 4,
+					     &oldchannel->offermsg, offer_sz,
+					     false);
+			print_hex_dump_debug("New vmbus offer: ",
+					     DUMP_PREFIX_OFFSET, 16, 4,
+					     offer, offer_sz, false);
+
+			/* Fix up the old channel. */
+			vmbus_setup_channel_state(oldchannel, offer);
 		}
 
-		/*
-		 * This is not an error, since the host can also change the
-		 * other field(s) of the offer, e.g. on WS RS5 (Build 17763),
-		 * the offer->connection_id of the Mellanox VF vmbus device
-		 * can change when the host reoffers the device upon resume.
-		 */
-		pr_debug("vmbus offer changed: relid=%d\n",
-			 offer->child_relid);
-
-		print_hex_dump_debug("Old vmbus offer: ", DUMP_PREFIX_OFFSET,
-				     16, 4, &oldchannel->offermsg, offer_sz,
-				     false);
-		print_hex_dump_debug("New vmbus offer: ", DUMP_PREFIX_OFFSET,
-				     16, 4, offer, offer_sz, false);
-
-		/* Fix up the old channel. */
-		vmbus_setup_channel_state(oldchannel, offer);
-
+		/* Add the channel back to the array of channels. */
+		vmbus_channel_map_relid(oldchannel);
 		check_ready_for_resume_event();
 
+		mutex_unlock(&vmbus_connection.channel_mutex);
 		return;
 	}
 
@@ -1028,11 +1037,22 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
 	 * offer comes in first and then the rescind.
 	 * Since we process these events in work elements,
 	 * and with preemption, we may end up processing
-	 * the events out of order. Given that we handle these
-	 * work elements on the same CPU, this is possible only
-	 * in the case of preemption. In any case wait here
-	 * until the offer processing has moved beyond the
-	 * point where the channel is discoverable.
+	 * the events out of order.  We rely on the synchronization
+	 * provided by offer_in_progress and by channel_mutex for
+	 * ordering these events:
+	 *
+	 * { Initially: offer_in_progress = 1 }
+	 *
+	 * CPU1				CPU2
+	 *
+	 * [vmbus_onoffer()]		[vmbus_onoffer_rescind()]
+	 *
+	 * LOCK channel_mutex		WAIT_ON offer_in_progress == 0
+	 * DECREMENT offer_in_progress	LOCK channel_mutex
+	 * STORE channels[]		LOAD channels[]
+	 * UNLOCK channel_mutex		UNLOCK channel_mutex
+	 *
+	 * Forbids: CPU2's LOAD from *not* seeing CPU1's STORE
 	 */
 
 	while (atomic_read(&vmbus_connection.offer_in_progress) != 0) {
@@ -1332,30 +1352,36 @@ static void vmbus_onversion_response(
 /* Channel message dispatch table */
 const struct vmbus_channel_message_table_entry
 channel_message_table[CHANNELMSG_COUNT] = {
-	{ CHANNELMSG_INVALID,			0, NULL },
-	{ CHANNELMSG_OFFERCHANNEL,		0, vmbus_onoffer },
-	{ CHANNELMSG_RESCIND_CHANNELOFFER,	0, vmbus_onoffer_rescind },
-	{ CHANNELMSG_REQUESTOFFERS,		0, NULL },
-	{ CHANNELMSG_ALLOFFERS_DELIVERED,	1, vmbus_onoffers_delivered },
-	{ CHANNELMSG_OPENCHANNEL,		0, NULL },
-	{ CHANNELMSG_OPENCHANNEL_RESULT,	1, vmbus_onopen_result },
-	{ CHANNELMSG_CLOSECHANNEL,		0, NULL },
-	{ CHANNELMSG_GPADL_HEADER,		0, NULL },
-	{ CHANNELMSG_GPADL_BODY,		0, NULL },
-	{ CHANNELMSG_GPADL_CREATED,		1, vmbus_ongpadl_created },
-	{ CHANNELMSG_GPADL_TEARDOWN,		0, NULL },
-	{ CHANNELMSG_GPADL_TORNDOWN,		1, vmbus_ongpadl_torndown },
-	{ CHANNELMSG_RELID_RELEASED,		0, NULL },
-	{ CHANNELMSG_INITIATE_CONTACT,		0, NULL },
-	{ CHANNELMSG_VERSION_RESPONSE,		1, vmbus_onversion_response },
-	{ CHANNELMSG_UNLOAD,			0, NULL },
-	{ CHANNELMSG_UNLOAD_RESPONSE,		1, vmbus_unload_response },
-	{ CHANNELMSG_18,			0, NULL },
-	{ CHANNELMSG_19,			0, NULL },
-	{ CHANNELMSG_20,			0, NULL },
-	{ CHANNELMSG_TL_CONNECT_REQUEST,	0, NULL },
-	{ CHANNELMSG_22,			0, NULL },
-	{ CHANNELMSG_TL_CONNECT_RESULT,		0, NULL },
+	{ CHANNELMSG_INVALID,			0, NULL, 0},
+	{ CHANNELMSG_OFFERCHANNEL,		0, vmbus_onoffer,
+		sizeof(struct vmbus_channel_offer_channel)},
+	{ CHANNELMSG_RESCIND_CHANNELOFFER,	0, vmbus_onoffer_rescind,
+		sizeof(struct vmbus_channel_rescind_offer) },
+	{ CHANNELMSG_REQUESTOFFERS,		0, NULL, 0},
+	{ CHANNELMSG_ALLOFFERS_DELIVERED,	1, vmbus_onoffers_delivered, 0},
+	{ CHANNELMSG_OPENCHANNEL,		0, NULL, 0},
+	{ CHANNELMSG_OPENCHANNEL_RESULT,	1, vmbus_onopen_result,
+		sizeof(struct vmbus_channel_open_result)},
+	{ CHANNELMSG_CLOSECHANNEL,		0, NULL, 0},
+	{ CHANNELMSG_GPADL_HEADER,		0, NULL, 0},
+	{ CHANNELMSG_GPADL_BODY,		0, NULL, 0},
+	{ CHANNELMSG_GPADL_CREATED,		1, vmbus_ongpadl_created,
+		sizeof(struct vmbus_channel_gpadl_created)},
+	{ CHANNELMSG_GPADL_TEARDOWN,		0, NULL, 0},
+	{ CHANNELMSG_GPADL_TORNDOWN,		1, vmbus_ongpadl_torndown,
+		sizeof(struct vmbus_channel_gpadl_torndown) },
+	{ CHANNELMSG_RELID_RELEASED,		0, NULL, 0},
+	{ CHANNELMSG_INITIATE_CONTACT,		0, NULL, 0},
+	{ CHANNELMSG_VERSION_RESPONSE,		1, vmbus_onversion_response,
+		sizeof(struct vmbus_channel_version_response)},
+	{ CHANNELMSG_UNLOAD,			0, NULL, 0},
+	{ CHANNELMSG_UNLOAD_RESPONSE,		1, vmbus_unload_response, 0},
+	{ CHANNELMSG_18,			0, NULL, 0},
+	{ CHANNELMSG_19,			0, NULL, 0},
+	{ CHANNELMSG_20,			0, NULL, 0},
+	{ CHANNELMSG_TL_CONNECT_REQUEST,	0, NULL, 0},
+	{ CHANNELMSG_MODIFYCHANNEL,		0, NULL, 0},
+	{ CHANNELMSG_TL_CONNECT_RESULT,		0, NULL, 0},
 };
 
 /*
@@ -1363,13 +1389,8 @@ channel_message_table[CHANNELMSG_COUNT] = {
  *
  * This is invoked in the vmbus worker thread context.
  */
-void vmbus_onmessage(void *context)
+void vmbus_onmessage(struct vmbus_channel_message_header *hdr)
 {
-	struct hv_message *msg = context;
-	struct vmbus_channel_message_header *hdr;
-
-	hdr = (struct vmbus_channel_message_header *)msg->u.payload;
-
 	trace_vmbus_on_message(hdr);
 
 	/*
diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index 74e77de89b4f..11170d9a2e1a 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -69,7 +69,6 @@ MODULE_PARM_DESC(max_version,
 int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version)
 {
 	int ret = 0;
-	unsigned int cur_cpu;
 	struct vmbus_channel_initiate_contact *msg;
 	unsigned long flags;
 
@@ -102,24 +101,7 @@ int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version)
 
 	msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages[0]);
 	msg->monitor_page2 = virt_to_phys(vmbus_connection.monitor_pages[1]);
-	/*
-	 * We want all channel messages to be delivered on CPU 0.
-	 * This has been the behavior pre-win8. This is not
-	 * perf issue and having all channel messages delivered on CPU 0
-	 * would be ok.
-	 * For post win8 hosts, we support receiving channel messagges on
-	 * all the CPUs. This is needed for kexec to work correctly where
-	 * the CPU attempting to connect may not be CPU 0.
-	 */
-	if (version >= VERSION_WIN8_1) {
-		cur_cpu = get_cpu();
-		msg->target_vcpu = hv_cpu_number_to_vp_number(cur_cpu);
-		vmbus_connection.connect_cpu = cur_cpu;
-		put_cpu();
-	} else {
-		msg->target_vcpu = 0;
-		vmbus_connection.connect_cpu = 0;
-	}
+	msg->target_vcpu = hv_cpu_number_to_vp_number(VMBUS_CONNECT_CPU);
 
 	/*
 	 * Add to list before we send the request since we may
@@ -266,6 +248,14 @@ int vmbus_connect(void)
 	pr_info("Vmbus version:%d.%d\n",
 		version >> 16, version & 0xFFFF);
 
+	vmbus_connection.channels = kcalloc(MAX_CHANNEL_RELIDS,
+					    sizeof(struct vmbus_channel *),
+					    GFP_KERNEL);
+	if (vmbus_connection.channels == NULL) {
+		ret = -ENOMEM;
+		goto cleanup;
+	}
+
 	kfree(msginfo);
 	return 0;
 
@@ -313,33 +303,9 @@ void vmbus_disconnect(void)
  */
 struct vmbus_channel *relid2channel(u32 relid)
 {
-	struct vmbus_channel *channel;
-	struct vmbus_channel *found_channel  = NULL;
-	struct list_head *cur, *tmp;
-	struct vmbus_channel *cur_sc;
-
-	BUG_ON(!mutex_is_locked(&vmbus_connection.channel_mutex));
-
-	list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) {
-		if (channel->offermsg.child_relid == relid) {
-			found_channel = channel;
-			break;
-		} else if (!list_empty(&channel->sc_list)) {
-			/*
-			 * Deal with sub-channels.
-			 */
-			list_for_each_safe(cur, tmp, &channel->sc_list) {
-				cur_sc = list_entry(cur, struct vmbus_channel,
-							sc_list);
-				if (cur_sc->offermsg.child_relid == relid) {
-					found_channel = cur_sc;
-					break;
-				}
-			}
-		}
-	}
-
-	return found_channel;
+	if (WARN_ON(relid >= MAX_CHANNEL_RELIDS))
+		return NULL;
+	return READ_ONCE(vmbus_connection.channels[relid]);
 }
 
 /*
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index 6098e0cbdb4b..857290dcfd95 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -117,8 +117,6 @@ int hv_synic_alloc(void)
 			pr_err("Unable to allocate post msg page\n");
 			goto err;
 		}
-
-		INIT_LIST_HEAD(&hv_cpu->chan_list);
 	}
 
 	return 0;
@@ -184,11 +182,7 @@ void hv_synic_enable_regs(unsigned int cpu)
 
 	shared_sint.vector = HYPERVISOR_CALLBACK_VECTOR;
 	shared_sint.masked = false;
-	if (ms_hyperv.hints & HV_DEPRECATING_AEOI_RECOMMENDED)
-		shared_sint.auto_eoi = false;
-	else
-		shared_sint.auto_eoi = true;
-
+	shared_sint.auto_eoi = hv_recommend_using_aeoi();
 	hv_set_synint_state(VMBUS_MESSAGE_SINT, shared_sint.as_uint64);
 
 	/* Enable the global synic bit */
@@ -249,11 +243,19 @@ int hv_synic_cleanup(unsigned int cpu)
 	bool channel_found = false;
 	unsigned long flags;
 
+	/*
+	 * Hyper-V does not provide a way to change the connect CPU once
+	 * it is set; we must prevent the connect CPU from going offline.
+	 */
+	if (cpu == VMBUS_CONNECT_CPU)
+		return -EBUSY;
+
 	/*
 	 * Search for channels which are bound to the CPU we're about to
-	 * cleanup. In case we find one and vmbus is still connected we need to
-	 * fail, this will effectively prevent CPU offlining. There is no way
-	 * we can re-bind channels to different CPUs for now.
+	 * cleanup.  In case we find one and vmbus is still connected, we
+	 * fail; this will effectively prevent CPU offlining.
+	 *
+	 * TODO: Re-bind the channels to different CPUs.
 	 */
 	mutex_lock(&vmbus_connection.channel_mutex);
 	list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) {
diff --git a/drivers/hv/hv_fcopy.c b/drivers/hv/hv_fcopy.c
index bb9ba3f7c794..5040d7e0cd9e 100644
--- a/drivers/hv/hv_fcopy.c
+++ b/drivers/hv/hv_fcopy.c
@@ -71,7 +71,7 @@ static void fcopy_poll_wrapper(void *channel)
 {
 	/* Transaction is finished, reset the state here to avoid races. */
 	fcopy_transaction.state = HVUTIL_READY;
-	hv_fcopy_onchannelcallback(channel);
+	tasklet_schedule(&((struct vmbus_channel *)channel)->callback_event);
 }
 
 static void fcopy_timeout_func(struct work_struct *dummy)
diff --git a/drivers/hv/hv_snapshot.c b/drivers/hv/hv_snapshot.c
index 1c75b38f0d6d..783779e4cc1a 100644
--- a/drivers/hv/hv_snapshot.c
+++ b/drivers/hv/hv_snapshot.c
@@ -80,7 +80,7 @@ static void vss_poll_wrapper(void *channel)
 {
 	/* Transaction is finished, reset the state here to avoid races. */
 	vss_transaction.state = HVUTIL_READY;
-	hv_vss_onchannelcallback(channel);
+	tasklet_schedule(&((struct vmbus_channel *)channel)->callback_event);
 }
 
 /*
diff --git a/drivers/hv/hv_trace.h b/drivers/hv/hv_trace.h
index e70783e33680..6063bb21bb13 100644
--- a/drivers/hv/hv_trace.h
+++ b/drivers/hv/hv_trace.h
@@ -44,10 +44,8 @@ TRACE_EVENT(vmbus_onoffer,
 			   __entry->monitorid = offer->monitorid;
 			   __entry->is_ddc_int = offer->is_dedicated_interrupt;
 			   __entry->connection_id = offer->connection_id;
-			   memcpy(__entry->if_type,
-				  &offer->offer.if_type.b, 16);
-			   memcpy(__entry->if_instance,
-				  &offer->offer.if_instance.b, 16);
+			   export_guid(__entry->if_type, &offer->offer.if_type);
+			   export_guid(__entry->if_instance, &offer->offer.if_instance);
 			   __entry->chn_flags = offer->offer.chn_flags;
 			   __entry->mmio_mb = offer->offer.mmio_megabytes;
 			   __entry->sub_idx = offer->offer.sub_channel_index;
@@ -286,8 +284,8 @@ TRACE_EVENT(vmbus_send_tl_connect_request,
 		    __field(int, ret)
 		    ),
 	    TP_fast_assign(
-		    memcpy(__entry->guest_id, &msg->guest_endpoint_id.b, 16);
-		    memcpy(__entry->host_id, &msg->host_service_id.b, 16);
+		    export_guid(__entry->guest_id, &msg->guest_endpoint_id);
+		    export_guid(__entry->host_id, &msg->host_service_id);
 		    __entry->ret = ret;
 		    ),
 	    TP_printk("sending guest_endpoint_id %pUl, host_service_id %pUl, "
@@ -296,6 +294,25 @@ TRACE_EVENT(vmbus_send_tl_connect_request,
 		    )
 	);
 
+TRACE_EVENT(vmbus_send_modifychannel,
+	    TP_PROTO(const struct vmbus_channel_modifychannel *msg,
+		     int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, target_vp)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->target_vp = msg->target_vp;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("binding child_relid 0x%x to target_vp 0x%x, ret %d",
+		      __entry->child_relid, __entry->target_vp, __entry->ret
+		    )
+	);
+
 DECLARE_EVENT_CLASS(vmbus_channel,
 	TP_PROTO(const struct vmbus_channel *channel),
 	TP_ARGS(channel),
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 70b30e223a57..5e5cebe5d048 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -132,12 +132,6 @@ struct hv_per_cpu_context {
 	 * basis.
 	 */
 	struct tasklet_struct msg_dpc;
-
-	/*
-	 * To optimize the mapping of relid to channel, maintain
-	 * per-cpu list of the channels based on their CPU affinity.
-	 */
-	struct list_head chan_list;
 };
 
 struct hv_context {
@@ -202,6 +196,8 @@ int hv_ringbuffer_read(struct vmbus_channel *channel,
 /* TODO: Need to make this configurable */
 #define MAX_NUM_CHANNELS_SUPPORTED	256
 
+#define MAX_CHANNEL_RELIDS					\
+	max(MAX_NUM_CHANNELS_SUPPORTED, HV_EVENT_FLAGS_COUNT)
 
 enum vmbus_connect_state {
 	DISCONNECTED,
@@ -212,12 +208,13 @@ enum vmbus_connect_state {
 
 #define MAX_SIZE_CHANNEL_MESSAGE	HV_MESSAGE_PAYLOAD_BYTE_COUNT
 
-struct vmbus_connection {
-	/*
-	 * CPU on which the initial host contact was made.
-	 */
-	int connect_cpu;
+/*
+ * The CPU that Hyper-V will interrupt for VMBUS messages, such as
+ * CHANNELMSG_OFFERCHANNEL and CHANNELMSG_RESCIND_CHANNELOFFER.
+ */
+#define VMBUS_CONNECT_CPU	0
 
+struct vmbus_connection {
 	u32 msg_conn_id;
 
 	atomic_t offer_in_progress;
@@ -250,6 +247,9 @@ struct vmbus_connection {
 	struct list_head chn_list;
 	struct mutex channel_mutex;
 
+	/* Array of channels */
+	struct vmbus_channel **channels;
+
 	/*
 	 * An offer message is handled first on the work_queue, and then
 	 * is further handled on handle_primary_chan_wq or
@@ -317,6 +317,7 @@ struct vmbus_channel_message_table_entry {
 	enum vmbus_channel_message_type message_type;
 	enum vmbus_message_handler_type handler_type;
 	void (*message_handler)(struct vmbus_channel_message_header *msg);
+	u32 min_payload_len;
 };
 
 extern const struct vmbus_channel_message_table_entry
@@ -336,6 +337,9 @@ int vmbus_add_channel_kobj(struct hv_device *device_obj,
 
 void vmbus_remove_channel_attr_group(struct vmbus_channel *channel);
 
+void vmbus_channel_map_relid(struct vmbus_channel *channel);
+void vmbus_channel_unmap_relid(struct vmbus_channel *channel);
+
 struct vmbus_channel *relid2channel(u32 relid);
 
 void vmbus_free_channels(void);
@@ -374,12 +378,7 @@ static inline void hv_poll_channel(struct vmbus_channel *channel,
 {
 	if (!channel)
 		return;
-
-	if (in_interrupt() && (channel->target_cpu == smp_processor_id())) {
-		cb(channel);
-		return;
-	}
-	smp_call_function_single(channel->target_cpu, cb, channel, true);
+	cb(channel);
 }
 
 enum hvutil_device_state {
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index a68bce4d0ddb..8651c58e8922 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -117,14 +117,6 @@ static int vmbus_exists(void)
 	return 0;
 }
 
-#define VMBUS_ALIAS_LEN ((sizeof((struct hv_vmbus_device_id *)0)->guid) * 2)
-static void print_alias_name(struct hv_device *hv_dev, char *alias_name)
-{
-	int i;
-	for (i = 0; i < VMBUS_ALIAS_LEN; i += 2)
-		sprintf(&alias_name[i], "%02x", hv_dev->dev_type.b[i/2]);
-}
-
 static u8 channel_monitor_group(const struct vmbus_channel *channel)
 {
 	return (u8)channel->offermsg.monitorid / 32;
@@ -201,7 +193,7 @@ static ssize_t class_id_show(struct device *dev,
 	if (!hv_dev->channel)
 		return -ENODEV;
 	return sprintf(buf, "{%pUl}\n",
-		       hv_dev->channel->offermsg.offer.if_type.b);
+		       &hv_dev->channel->offermsg.offer.if_type);
 }
 static DEVICE_ATTR_RO(class_id);
 
@@ -213,7 +205,7 @@ static ssize_t device_id_show(struct device *dev,
 	if (!hv_dev->channel)
 		return -ENODEV;
 	return sprintf(buf, "{%pUl}\n",
-		       hv_dev->channel->offermsg.offer.if_instance.b);
+		       &hv_dev->channel->offermsg.offer.if_instance);
 }
 static DEVICE_ATTR_RO(device_id);
 
@@ -221,10 +213,8 @@ static ssize_t modalias_show(struct device *dev,
 			     struct device_attribute *dev_attr, char *buf)
 {
 	struct hv_device *hv_dev = device_to_hv_device(dev);
-	char alias_name[VMBUS_ALIAS_LEN + 1];
 
-	print_alias_name(hv_dev, alias_name);
-	return sprintf(buf, "vmbus:%s\n", alias_name);
+	return sprintf(buf, "vmbus:%*phN\n", UUID_SIZE, &hv_dev->dev_type);
 }
 static DEVICE_ATTR_RO(modalias);
 
@@ -693,12 +683,9 @@ __ATTRIBUTE_GROUPS(vmbus_dev);
 static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env)
 {
 	struct hv_device *dev = device_to_hv_device(device);
-	int ret;
-	char alias_name[VMBUS_ALIAS_LEN + 1];
+	const char *format = "MODALIAS=vmbus:%*phN";
 
-	print_alias_name(dev, alias_name);
-	ret = add_uevent_var(env, "MODALIAS=vmbus:%s", alias_name);
-	return ret;
+	return add_uevent_var(env, format, UUID_SIZE, &dev->dev_type);
 }
 
 static const struct hv_vmbus_device_id *
@@ -978,6 +965,9 @@ static int vmbus_resume(struct device *child_device)
 
 	return drv->resume(dev);
 }
+#else
+#define vmbus_suspend NULL
+#define vmbus_resume NULL
 #endif /* CONFIG_PM_SLEEP */
 
 /*
@@ -997,11 +987,22 @@ static void vmbus_device_release(struct device *device)
 }
 
 /*
- * Note: we must use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS rather than
- * SET_SYSTEM_SLEEP_PM_OPS: see the comment before vmbus_bus_pm.
+ * Note: we must use the "noirq" ops: see the comment before vmbus_bus_pm.
+ *
+ * suspend_noirq/resume_noirq are set to NULL to support Suspend-to-Idle: we
+ * shouldn't suspend the vmbus devices upon Suspend-to-Idle, otherwise there
+ * is no way to wake up a Generation-2 VM.
+ *
+ * The other 4 ops are for hibernation.
  */
+
 static const struct dev_pm_ops vmbus_pm = {
-	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(vmbus_suspend, vmbus_resume)
+	.suspend_noirq	= NULL,
+	.resume_noirq	= NULL,
+	.freeze_noirq	= vmbus_suspend,
+	.thaw_noirq	= vmbus_resume,
+	.poweroff_noirq	= vmbus_suspend,
+	.restore_noirq	= vmbus_resume,
 };
 
 /* The one and only one */
@@ -1019,7 +1020,10 @@ static struct bus_type  hv_bus = {
 
 struct onmessage_work_context {
 	struct work_struct work;
-	struct hv_message msg;
+	struct {
+		struct hv_message_header header;
+		u8 payload[];
+	} msg;
 };
 
 static void vmbus_onmessage_work(struct work_struct *work)
@@ -1032,7 +1036,8 @@ static void vmbus_onmessage_work(struct work_struct *work)
 
 	ctx = container_of(work, struct onmessage_work_context,
 			   work);
-	vmbus_onmessage(&ctx->msg);
+	vmbus_onmessage((struct vmbus_channel_message_header *)
+			&ctx->msg.payload);
 	kfree(ctx);
 }
 
@@ -1047,6 +1052,13 @@ void vmbus_on_msg_dpc(unsigned long data)
 	struct onmessage_work_context *ctx;
 	u32 message_type = msg->header.message_type;
 
+	/*
+	 * 'enum vmbus_channel_message_type' is supposed to always be 'u32' as
+	 * it is being used in 'struct vmbus_channel_message_header' definition
+	 * which is supposed to match hypervisor ABI.
+	 */
+	BUILD_BUG_ON(sizeof(enum vmbus_channel_message_type) != sizeof(u32));
+
 	if (message_type == HVMSG_NONE)
 		/* no msg */
 		return;
@@ -1060,41 +1072,88 @@ void vmbus_on_msg_dpc(unsigned long data)
 		goto msg_handled;
 	}
 
+	if (msg->header.payload_size > HV_MESSAGE_PAYLOAD_BYTE_COUNT) {
+		WARN_ONCE(1, "payload size is too large (%d)\n",
+			  msg->header.payload_size);
+		goto msg_handled;
+	}
+
 	entry = &channel_message_table[hdr->msgtype];
 
 	if (!entry->message_handler)
 		goto msg_handled;
 
+	if (msg->header.payload_size < entry->min_payload_len) {
+		WARN_ONCE(1, "message too short: msgtype=%d len=%d\n",
+			  hdr->msgtype, msg->header.payload_size);
+		goto msg_handled;
+	}
+
 	if (entry->handler_type	== VMHT_BLOCKING) {
-		ctx = kmalloc(sizeof(*ctx), GFP_ATOMIC);
+		ctx = kmalloc(sizeof(*ctx) + msg->header.payload_size,
+			      GFP_ATOMIC);
 		if (ctx == NULL)
 			return;
 
 		INIT_WORK(&ctx->work, vmbus_onmessage_work);
-		memcpy(&ctx->msg, msg, sizeof(*msg));
+		memcpy(&ctx->msg, msg, sizeof(msg->header) +
+		       msg->header.payload_size);
 
 		/*
 		 * The host can generate a rescind message while we
 		 * may still be handling the original offer. We deal with
-		 * this condition by ensuring the processing is done on the
-		 * same CPU.
+		 * this condition by relying on the synchronization provided
+		 * by offer_in_progress and by channel_mutex.  See also the
+		 * inline comments in vmbus_onoffer_rescind().
 		 */
 		switch (hdr->msgtype) {
 		case CHANNELMSG_RESCIND_CHANNELOFFER:
 			/*
 			 * If we are handling the rescind message;
 			 * schedule the work on the global work queue.
+			 *
+			 * The OFFER message and the RESCIND message should
+			 * not be handled by the same serialized work queue,
+			 * because the OFFER handler may call vmbus_open(),
+			 * which tries to open the channel by sending an
+			 * OPEN_CHANNEL message to the host and waits for
+			 * the host's response; however, if the host has
+			 * rescinded the channel before it receives the
+			 * OPEN_CHANNEL message, the host just silently
+			 * ignores the OPEN_CHANNEL message; as a result,
+			 * the guest's OFFER handler hangs for ever, if we
+			 * handle the RESCIND message in the same serialized
+			 * work queue: the RESCIND handler can not start to
+			 * run before the OFFER handler finishes.
 			 */
-			schedule_work_on(vmbus_connection.connect_cpu,
-					 &ctx->work);
+			schedule_work(&ctx->work);
 			break;
 
 		case CHANNELMSG_OFFERCHANNEL:
+			/*
+			 * The host sends the offer message of a given channel
+			 * before sending the rescind message of the same
+			 * channel.  These messages are sent to the guest's
+			 * connect CPU; the guest then starts processing them
+			 * in the tasklet handler on this CPU:
+			 *
+			 * VMBUS_CONNECT_CPU
+			 *
+			 * [vmbus_on_msg_dpc()]
+			 * atomic_inc()  // CHANNELMSG_OFFERCHANNEL
+			 * queue_work()
+			 * ...
+			 * [vmbus_on_msg_dpc()]
+			 * schedule_work()  // CHANNELMSG_RESCIND_CHANNELOFFER
+			 *
+			 * We rely on the memory-ordering properties of the
+			 * queue_work() and schedule_work() primitives, which
+			 * guarantee that the atomic increment will be visible
+			 * to the CPUs which will execute the offer & rescind
+			 * works by the time these works will start execution.
+			 */
 			atomic_inc(&vmbus_connection.offer_in_progress);
-			queue_work_on(vmbus_connection.connect_cpu,
-				      vmbus_connection.work_queue,
-				      &ctx->work);
-			break;
+			fallthrough;
 
 		default:
 			queue_work(vmbus_connection.work_queue, &ctx->work);
@@ -1119,10 +1178,11 @@ static void vmbus_force_channel_rescinded(struct vmbus_channel *channel)
 	WARN_ON(!is_hvsock_channel(channel));
 
 	/*
-	 * sizeof(*ctx) is small and the allocation should really not fail,
+	 * Allocation size is small and the allocation should really not fail,
 	 * otherwise the state of the hv_sock connections ends up in limbo.
 	 */
-	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL | __GFP_NOFAIL);
+	ctx = kzalloc(sizeof(*ctx) + sizeof(*rescind),
+		      GFP_KERNEL | __GFP_NOFAIL);
 
 	/*
 	 * So far, these are not really used by Linux. Just set them to the
@@ -1132,30 +1192,16 @@ static void vmbus_force_channel_rescinded(struct vmbus_channel *channel)
 	ctx->msg.header.payload_size = sizeof(*rescind);
 
 	/* These values are actually used by Linux. */
-	rescind = (struct vmbus_channel_rescind_offer *)ctx->msg.u.payload;
+	rescind = (struct vmbus_channel_rescind_offer *)ctx->msg.payload;
 	rescind->header.msgtype = CHANNELMSG_RESCIND_CHANNELOFFER;
 	rescind->child_relid = channel->offermsg.child_relid;
 
 	INIT_WORK(&ctx->work, vmbus_onmessage_work);
 
-	queue_work_on(vmbus_connection.connect_cpu,
-		      vmbus_connection.work_queue,
-		      &ctx->work);
+	queue_work(vmbus_connection.work_queue, &ctx->work);
 }
 #endif /* CONFIG_PM_SLEEP */
 
-/*
- * Direct callback for channels using other deferred processing
- */
-static void vmbus_channel_isr(struct vmbus_channel *channel)
-{
-	void (*callback_fn)(void *);
-
-	callback_fn = READ_ONCE(channel->onchannel_callback);
-	if (likely(callback_fn != NULL))
-		(*callback_fn)(channel->channel_callback_context);
-}
-
 /*
  * Schedule all channels with events pending
  */
@@ -1186,6 +1232,7 @@ static void vmbus_chan_sched(struct hv_per_cpu_context *hv_cpu)
 		return;
 
 	for_each_set_bit(relid, recv_int_page, maxbits) {
+		void (*callback_fn)(void *context);
 		struct vmbus_channel *channel;
 
 		if (!sync_test_and_clear_bit(relid, recv_int_page))
@@ -1195,33 +1242,54 @@ static void vmbus_chan_sched(struct hv_per_cpu_context *hv_cpu)
 		if (relid == 0)
 			continue;
 
+		/*
+		 * Pairs with the kfree_rcu() in vmbus_chan_release().
+		 * Guarantees that the channel data structure doesn't
+		 * get freed while the channel pointer below is being
+		 * dereferenced.
+		 */
 		rcu_read_lock();
 
 		/* Find channel based on relid */
-		list_for_each_entry_rcu(channel, &hv_cpu->chan_list, percpu_list) {
-			if (channel->offermsg.child_relid != relid)
-				continue;
+		channel = relid2channel(relid);
+		if (channel == NULL)
+			goto sched_unlock_rcu;
 
-			if (channel->rescind)
-				continue;
+		if (channel->rescind)
+			goto sched_unlock_rcu;
 
-			trace_vmbus_chan_sched(channel);
+		/*
+		 * Make sure that the ring buffer data structure doesn't get
+		 * freed while we dereference the ring buffer pointer.  Test
+		 * for the channel's onchannel_callback being NULL within a
+		 * sched_lock critical section.  See also the inline comments
+		 * in vmbus_reset_channel_cb().
+		 */
+		spin_lock(&channel->sched_lock);
 
-			++channel->interrupts;
+		callback_fn = channel->onchannel_callback;
+		if (unlikely(callback_fn == NULL))
+			goto sched_unlock;
 
-			switch (channel->callback_mode) {
-			case HV_CALL_ISR:
-				vmbus_channel_isr(channel);
-				break;
+		trace_vmbus_chan_sched(channel);
 
-			case HV_CALL_BATCHED:
-				hv_begin_read(&channel->inbound);
-				/* fallthrough */
-			case HV_CALL_DIRECT:
-				tasklet_schedule(&channel->callback_event);
-			}
+		++channel->interrupts;
+
+		switch (channel->callback_mode) {
+		case HV_CALL_ISR:
+			(*callback_fn)(channel->channel_callback_context);
+			break;
+
+		case HV_CALL_BATCHED:
+			hv_begin_read(&channel->inbound);
+			fallthrough;
+		case HV_CALL_DIRECT:
+			tasklet_schedule(&channel->callback_event);
 		}
 
+sched_unlock:
+		spin_unlock(&channel->sched_lock);
+sched_unlock_rcu:
 		rcu_read_unlock();
 	}
 }
@@ -1539,8 +1607,24 @@ static ssize_t vmbus_chan_attr_show(struct kobject *kobj,
 	return attribute->show(chan, buf);
 }
 
+static ssize_t vmbus_chan_attr_store(struct kobject *kobj,
+				     struct attribute *attr, const char *buf,
+				     size_t count)
+{
+	const struct vmbus_chan_attribute *attribute
+		= container_of(attr, struct vmbus_chan_attribute, attr);
+	struct vmbus_channel *chan
+		= container_of(kobj, struct vmbus_channel, kobj);
+
+	if (!attribute->store)
+		return -EIO;
+
+	return attribute->store(chan, buf, count);
+}
+
 static const struct sysfs_ops vmbus_chan_sysfs_ops = {
 	.show = vmbus_chan_attr_show,
+	.store = vmbus_chan_attr_store,
 };
 
 static ssize_t out_mask_show(struct vmbus_channel *channel, char *buf)
@@ -1611,11 +1695,103 @@ static ssize_t write_avail_show(struct vmbus_channel *channel, char *buf)
 }
 static VMBUS_CHAN_ATTR_RO(write_avail);
 
-static ssize_t show_target_cpu(struct vmbus_channel *channel, char *buf)
+static ssize_t target_cpu_show(struct vmbus_channel *channel, char *buf)
 {
 	return sprintf(buf, "%u\n", channel->target_cpu);
 }
-static VMBUS_CHAN_ATTR(cpu, S_IRUGO, show_target_cpu, NULL);
+static ssize_t target_cpu_store(struct vmbus_channel *channel,
+				const char *buf, size_t count)
+{
+	ssize_t ret = count;
+	u32 target_cpu;
+
+	if (vmbus_proto_version < VERSION_WIN10_V4_1)
+		return -EIO;
+
+	if (sscanf(buf, "%uu", &target_cpu) != 1)
+		return -EIO;
+
+	/* Validate target_cpu for the cpumask_test_cpu() operation below. */
+	if (target_cpu >= nr_cpumask_bits)
+		return -EINVAL;
+
+	/* No CPUs should come up or down during this. */
+	cpus_read_lock();
+
+	if (!cpumask_test_cpu(target_cpu, cpu_online_mask)) {
+		cpus_read_unlock();
+		return -EINVAL;
+	}
+
+	/*
+	 * Synchronizes target_cpu_store() and channel closure:
+	 *
+	 * { Initially: state = CHANNEL_OPENED }
+	 *
+	 * CPU1				CPU2
+	 *
+	 * [target_cpu_store()]		[vmbus_disconnect_ring()]
+	 *
+	 * LOCK channel_mutex		LOCK channel_mutex
+	 * LOAD r1 = state		LOAD r2 = state
+	 * IF (r1 == CHANNEL_OPENED)	IF (r2 == CHANNEL_OPENED)
+	 *   SEND MODIFYCHANNEL		  STORE state = CHANNEL_OPEN
+	 *   [...]			  SEND CLOSECHANNEL
+	 * UNLOCK channel_mutex		UNLOCK channel_mutex
+	 *
+	 * Forbids: r1 == r2 == CHANNEL_OPENED (i.e., CPU1's LOCK precedes
+	 * 		CPU2's LOCK) && CPU2's SEND precedes CPU1's SEND
+	 *
+	 * Note.  The host processes the channel messages "sequentially", in
+	 * the order in which they are received on a per-partition basis.
+	 */
+	mutex_lock(&vmbus_connection.channel_mutex);
+
+	/*
+	 * Hyper-V will ignore MODIFYCHANNEL messages for "non-open" channels;
+	 * avoid sending the message and fail here for such channels.
+	 */
+	if (channel->state != CHANNEL_OPENED_STATE) {
+		ret = -EIO;
+		goto cpu_store_unlock;
+	}
+
+	if (channel->target_cpu == target_cpu)
+		goto cpu_store_unlock;
+
+	if (vmbus_send_modifychannel(channel->offermsg.child_relid,
+				     hv_cpu_number_to_vp_number(target_cpu))) {
+		ret = -EIO;
+		goto cpu_store_unlock;
+	}
+
+	/*
+	 * Warning.  At this point, there is *no* guarantee that the host will
+	 * have successfully processed the vmbus_send_modifychannel() request.
+	 * See the header comment of vmbus_send_modifychannel() for more info.
+	 *
+	 * Lags in the processing of the above vmbus_send_modifychannel() can
+	 * result in missed interrupts if the "old" target CPU is taken offline
+	 * before Hyper-V starts sending interrupts to the "new" target CPU.
+	 * But apart from this offlining scenario, the code tolerates such
+	 * lags.  It will function correctly even if a channel interrupt comes
+	 * in on a CPU that is different from the channel target_cpu value.
+	 */
+
+	if (channel->change_target_cpu_callback)
+		(*channel->change_target_cpu_callback)(channel,
+				channel->target_cpu, target_cpu);
+
+	channel->target_cpu = target_cpu;
+	channel->target_vp = hv_cpu_number_to_vp_number(target_cpu);
+	channel->numa_node = cpu_to_node(target_cpu);
+
+cpu_store_unlock:
+	mutex_unlock(&vmbus_connection.channel_mutex);
+	cpus_read_unlock();
+	return ret;
+}
+static VMBUS_CHAN_ATTR(cpu, 0644, target_cpu_show, target_cpu_store);
 
 static ssize_t channel_pending_show(struct vmbus_channel *channel,
 				    char *buf)
@@ -1816,7 +1992,7 @@ int vmbus_device_register(struct hv_device *child_device_obj)
 	int ret;
 
 	dev_set_name(&child_device_obj->device, "%pUl",
-		     child_device_obj->channel->offermsg.offer.if_instance.b);
+		     &child_device_obj->channel->offermsg.offer.if_instance);
 
 	child_device_obj->device.bus = &hv_bus;
 	child_device_obj->device.parent = &hv_acpi_dev->dev;
@@ -2207,9 +2383,12 @@ static int vmbus_bus_suspend(struct device *dev)
 
 	list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) {
 		/*
-		 * Invalidate the field. Upon resume, vmbus_onoffer() will fix
-		 * up the field, and the other fields (if necessary).
+		 * Remove the channel from the array of channels and invalidate
+		 * the channel's relid.  Upon resume, vmbus_onoffer() will fix
+		 * up the relid (and other fields, if necessary) and add the
+		 * channel back to the array.
 		 */
+		vmbus_channel_unmap_relid(channel);
 		channel->offermsg.child_relid = INVALID_RELID;
 
 		if (is_hvsock_channel(channel)) {
@@ -2281,6 +2460,9 @@ static int vmbus_bus_resume(struct device *dev)
 
 	return 0;
 }
+#else
+#define vmbus_bus_suspend NULL
+#define vmbus_bus_resume NULL
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct acpi_device_id vmbus_acpi_device_ids[] = {
@@ -2291,16 +2473,24 @@ static const struct acpi_device_id vmbus_acpi_device_ids[] = {
 MODULE_DEVICE_TABLE(acpi, vmbus_acpi_device_ids);
 
 /*
- * Note: we must use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS rather than
- * SET_SYSTEM_SLEEP_PM_OPS, otherwise NIC SR-IOV can not work, because the
- * "pci_dev_pm_ops" uses the "noirq" callbacks: in the resume path, the
- * pci "noirq" restore callback runs before "non-noirq" callbacks (see
+ * Note: we must use the "no_irq" ops, otherwise hibernation can not work with
+ * PCI device assignment, because "pci_dev_pm_ops" uses the "noirq" ops: in
+ * the resume path, the pci "noirq" restore op runs before "non-noirq" op (see
  * resume_target_kernel() -> dpm_resume_start(), and hibernation_restore() ->
  * dpm_resume_end()). This means vmbus_bus_resume() and the pci-hyperv's
- * resume callback must also run via the "noirq" callbacks.
+ * resume callback must also run via the "noirq" ops.
+ *
+ * Set suspend_noirq/resume_noirq to NULL for Suspend-to-Idle: see the comment
+ * earlier in this file before vmbus_pm.
  */
+
 static const struct dev_pm_ops vmbus_bus_pm = {
-	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(vmbus_bus_suspend, vmbus_bus_resume)
+	.suspend_noirq	= NULL,
+	.resume_noirq	= NULL,
+	.freeze_noirq	= vmbus_bus_suspend,
+	.thaw_noirq	= vmbus_bus_resume,
+	.poweroff_noirq	= vmbus_bus_suspend,
+	.restore_noirq	= vmbus_bus_resume
 };
 
 static struct acpi_driver vmbus_acpi_driver = {
@@ -2445,6 +2635,7 @@ static void __exit vmbus_exit(void)
 	hv_debug_rm_all_dir();
 
 	vmbus_free_channels();
+	kfree(vmbus_connection.channels);
 
 	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) {
 		kmsg_dump_unregister(&hv_kmsg_dumper);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4c62f900bf7e..a08765c80a49 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1340,10 +1340,12 @@ config SENSORS_NCT7802
 
 config SENSORS_NCT7904
 	tristate "Nuvoton NCT7904"
-	depends on I2C
+	depends on I2C && WATCHDOG
+	select WATCHDOG_CORE
 	help
 	  If you say yes here you get support for the Nuvoton NCT7904
-	  hardware monitoring chip, including manual fan speed control.
+	  hardware monitoring chip, including manual fan speed control
+	  and support for the integrated watchdog.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called nct7904.
diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index ab719d372b0d..16be012a95ed 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -1072,13 +1072,6 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro"),
 		},
 	},
-	{
-		.ident = "Dell XPS421",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XPS L421X"),
-		},
-	},
 	{
 		.ident = "Dell Studio",
 		.matches = {
@@ -1087,14 +1080,6 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {
 		},
 		.driver_data = (void *)&i8k_config_data[DELL_STUDIO],
 	},
-	{
-		.ident = "Dell XPS 13",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XPS13"),
-		},
-		.driver_data = (void *)&i8k_config_data[DELL_XPS],
-	},
 	{
 		.ident = "Dell XPS M140",
 		.matches = {
@@ -1104,17 +1089,10 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {
 		.driver_data = (void *)&i8k_config_data[DELL_XPS],
 	},
 	{
-		.ident = "Dell XPS 15 9560",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 15 9560"),
-		},
-	},
-	{
-		.ident = "Dell XPS 15 9570",
+		.ident = "Dell XPS",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 15 9570"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS"),
 		},
 	},
 	{ }
diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index 4122e59f0bb4..ae2b84263a44 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -25,7 +25,7 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 #include <linux/of_device.h>
-
+#include <linux/acpi.h>
 
 #define DRVNAME		"lm70"
 
@@ -148,18 +148,50 @@ static const struct of_device_id lm70_of_ids[] = {
 MODULE_DEVICE_TABLE(of, lm70_of_ids);
 #endif
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id lm70_acpi_ids[] = {
+	{
+		.id = "LM000070",
+		.driver_data = LM70_CHIP_LM70,
+	},
+	{
+		.id = "TMP00121",
+		.driver_data = LM70_CHIP_TMP121,
+	},
+	{
+		.id = "LM000071",
+		.driver_data = LM70_CHIP_LM71,
+	},
+	{
+		.id = "LM000074",
+		.driver_data = LM70_CHIP_LM74,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, lm70_acpi_ids);
+#endif
+
 static int lm70_probe(struct spi_device *spi)
 {
-	const struct of_device_id *match;
+	const struct of_device_id *of_match;
 	struct device *hwmon_dev;
 	struct lm70 *p_lm70;
 	int chip;
 
-	match = of_match_device(lm70_of_ids, &spi->dev);
-	if (match)
-		chip = (int)(uintptr_t)match->data;
-	else
-		chip = spi_get_device_id(spi)->driver_data;
+	of_match = of_match_device(lm70_of_ids, &spi->dev);
+	if (of_match)
+		chip = (int)(uintptr_t)of_match->data;
+	else {
+#ifdef CONFIG_ACPI
+		const struct acpi_device_id *acpi_match;
+
+		acpi_match = acpi_match_device(lm70_acpi_ids, &spi->dev);
+		if (acpi_match)
+			chip = (int)(uintptr_t)acpi_match->driver_data;
+		else
+#endif
+			chip = spi_get_device_id(spi)->driver_data;
+	}
 
 	/* signaling is SPI_MODE_0 */
 	if (spi->mode & (SPI_CPOL | SPI_CPHA))
@@ -195,6 +227,7 @@ static struct spi_driver lm70_driver = {
 	.driver = {
 		.name	= "lm70",
 		.of_match_table	= of_match_ptr(lm70_of_ids),
+		.acpi_match_table = ACPI_PTR(lm70_acpi_ids),
 	},
 	.id_table = lm70_ids,
 	.probe	= lm70_probe,
diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
index 1f5743d68984..571a6491a21f 100644
--- a/drivers/hwmon/nct7904.c
+++ b/drivers/hwmon/nct7904.c
@@ -8,6 +8,9 @@
  * Copyright (c) 2019 Advantech
  * Author: Amy.Shih <amy.shih@advantech.com.tw>
  *
+ * Copyright (c) 2020 Advantech
+ * Author: Yuechao Zhao <yuechao.zhao@advantech.com.cn>
+ *
  * Supports the following chips:
  *
  * Chip        #vin  #fan  #pwm  #temp  #dts  chip ID
@@ -20,6 +23,7 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
 #include <linux/hwmon.h>
+#include <linux/watchdog.h>
 
 #define VENDOR_ID_REG		0x7A	/* Any bank */
 #define NUVOTON_ID		0x50
@@ -87,18 +91,42 @@
 #define FANCTL1_FMR_REG		0x00	/* Bank 3; 1 reg per channel */
 #define FANCTL1_OUT_REG		0x10	/* Bank 3; 1 reg per channel */
 
+#define WDT_LOCK_REG		0xE0	/* W/O Lock Watchdog Register */
+#define WDT_EN_REG		0xE1	/* R/O Watchdog Enable Register */
+#define WDT_STS_REG		0xE2	/* R/O Watchdog Status Register */
+#define WDT_TIMER_REG		0xE3	/* R/W Watchdog Timer Register */
+#define WDT_SOFT_EN		0x55	/* Enable soft watchdog timer */
+#define WDT_SOFT_DIS		0xAA	/* Disable soft watchdog timer */
+
 #define VOLT_MONITOR_MODE	0x0
 #define THERMAL_DIODE_MODE	0x1
 #define THERMISTOR_MODE		0x3
 
 #define ENABLE_TSI	BIT(1)
 
+#define WATCHDOG_TIMEOUT	1	/* 1 minute default timeout */
+
+/*The timeout range is 1-255 minutes*/
+#define MIN_TIMEOUT		(1 * 60)
+#define MAX_TIMEOUT		(255 * 60)
+
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes. 1 <= timeout <= 255, default="
+			__MODULE_STRING(WATCHODOG_TIMEOUT) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started once started (default="
+			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
 static const unsigned short normal_i2c[] = {
 	0x2d, 0x2e, I2C_CLIENT_END
 };
 
 struct nct7904_data {
 	struct i2c_client *client;
+	struct watchdog_device wdt;
 	struct mutex bank_lock;
 	int bank_sel;
 	u32 fanin_mask;
@@ -889,6 +917,95 @@ static const struct hwmon_chip_info nct7904_chip_info = {
 	.info = nct7904_info,
 };
 
+/*
+ * Watchdog Function
+ */
+static int nct7904_wdt_start(struct watchdog_device *wdt)
+{
+	struct nct7904_data *data = watchdog_get_drvdata(wdt);
+
+	/* Enable soft watchdog timer */
+	return nct7904_write_reg(data, BANK_0, WDT_LOCK_REG, WDT_SOFT_EN);
+}
+
+static int nct7904_wdt_stop(struct watchdog_device *wdt)
+{
+	struct nct7904_data *data = watchdog_get_drvdata(wdt);
+
+	return nct7904_write_reg(data, BANK_0, WDT_LOCK_REG, WDT_SOFT_DIS);
+}
+
+static int nct7904_wdt_set_timeout(struct watchdog_device *wdt,
+				   unsigned int timeout)
+{
+	struct nct7904_data *data = watchdog_get_drvdata(wdt);
+	/*
+	 * The NCT7904 is very special in watchdog function.
+	 * Its minimum unit is minutes. And wdt->timeout needs
+	 * to match the actual timeout selected. So, this needs
+	 * to be: wdt->timeout = timeout / 60 * 60.
+	 * For example, if the user configures a timeout of
+	 * 119 seconds, the actual timeout will be 60 seconds.
+	 * So, wdt->timeout must then be set to 60 seconds.
+	 */
+	wdt->timeout = timeout / 60 * 60;
+
+	return nct7904_write_reg(data, BANK_0, WDT_TIMER_REG,
+				 wdt->timeout / 60);
+}
+
+static int nct7904_wdt_ping(struct watchdog_device *wdt)
+{
+	/*
+	 * Note:
+	 * NCT7904 does not support refreshing WDT_TIMER_REG register when
+	 * the watchdog is active. Please disable watchdog before feeding
+	 * the watchdog and enable it again.
+	 */
+	struct nct7904_data *data = watchdog_get_drvdata(wdt);
+	int ret;
+
+	/* Disable soft watchdog timer */
+	ret = nct7904_write_reg(data, BANK_0, WDT_LOCK_REG, WDT_SOFT_DIS);
+	if (ret < 0)
+		return ret;
+
+	/* feed watchdog */
+	ret = nct7904_write_reg(data, BANK_0, WDT_TIMER_REG, wdt->timeout / 60);
+	if (ret < 0)
+		return ret;
+
+	/* Enable soft watchdog timer */
+	return nct7904_write_reg(data, BANK_0, WDT_TIMER_REG, WDT_SOFT_EN);
+}
+
+static unsigned int nct7904_wdt_get_timeleft(struct watchdog_device *wdt)
+{
+	struct nct7904_data *data = watchdog_get_drvdata(wdt);
+	int ret;
+
+	ret = nct7904_read_reg(data, BANK_0, WDT_TIMER_REG);
+	if (ret < 0)
+		return 0;
+
+	return ret * 60;
+}
+
+static const struct watchdog_info nct7904_wdt_info = {
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE,
+	.identity	= "nct7904 watchdog",
+};
+
+static const struct watchdog_ops nct7904_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= nct7904_wdt_start,
+	.stop		= nct7904_wdt_stop,
+	.ping		= nct7904_wdt_ping,
+	.set_timeout	= nct7904_wdt_set_timeout,
+	.get_timeleft	= nct7904_wdt_get_timeleft,
+};
+
 static int nct7904_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -1012,7 +1129,26 @@ static int nct7904_probe(struct i2c_client *client,
 	hwmon_dev =
 		devm_hwmon_device_register_with_info(dev, client->name, data,
 						     &nct7904_chip_info, NULL);
-	return PTR_ERR_OR_ZERO(hwmon_dev);
+	ret = PTR_ERR_OR_ZERO(hwmon_dev);
+	if (ret)
+		return ret;
+
+	/* Watchdog initialization */
+	data->wdt.ops = &nct7904_wdt_ops;
+	data->wdt.info = &nct7904_wdt_info;
+
+	data->wdt.timeout = timeout * 60; /* in seconds */
+	data->wdt.min_timeout = MIN_TIMEOUT;
+	data->wdt.max_timeout = MAX_TIMEOUT;
+	data->wdt.parent = &client->dev;
+
+	watchdog_init_timeout(&data->wdt, timeout * 60, &client->dev);
+	watchdog_set_nowayout(&data->wdt, nowayout);
+	watchdog_set_drvdata(&data->wdt, data);
+
+	watchdog_stop_on_unregister(&data->wdt);
+
+	return devm_watchdog_register_device(dev, &data->wdt);
 }
 
 static const struct i2c_device_id nct7904_id[] = {
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index 83e841be1081..02dbb5ca3bcf 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -107,7 +107,7 @@ config CORESIGHT_CPU_DEBUG
 	  can quickly get to know program counter (PC), secure state,
 	  exception level, etc. Before use debugging functionality, platform
 	  needs to ensure the clock domain and power domain are enabled
-	  properly, please refer Documentation/trace/coresight-cpu-debug.rst
+	  properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst
 	  for detailed description and the example for usage.
 
 config CORESIGHT_CTI
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
index 0e3e72f0f510..19497d1d92bf 100644
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@@ -2,7 +2,8 @@
 #
 # Makefile for CoreSight drivers.
 #
-obj-$(CONFIG_CORESIGHT) += coresight.o coresight-etm-perf.o coresight-platform.o
+obj-$(CONFIG_CORESIGHT) += coresight.o coresight-etm-perf.o \
+			   coresight-platform.o coresight-sysfs.o
 obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o \
 					     coresight-tmc-etf.o \
 					     coresight-tmc-etr.o
diff --git a/drivers/hwtracing/coresight/coresight-cti-platform.c b/drivers/hwtracing/coresight/coresight-cti-platform.c
index b44d83142b62..ebd8b92f854a 100644
--- a/drivers/hwtracing/coresight/coresight-cti-platform.c
+++ b/drivers/hwtracing/coresight/coresight-cti-platform.c
@@ -2,11 +2,16 @@
 /*
  * Copyright (c) 2019, The Linaro Limited. All rights reserved.
  */
+#include <linux/coresight.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/property.h>
 
 #include <dt-bindings/arm/coresight-cti-dt.h>
-#include <linux/of.h>
 
 #include "coresight-cti.h"
+#include "coresight-priv.h"
 
 /* Number of CTI signals in the v8 architecturally defined connection */
 #define NR_V8PE_IN_SIGS		2
@@ -429,8 +434,7 @@ static int cti_plat_create_impdef_connections(struct device *dev,
 }
 
 /* get the hardware configuration & connection data. */
-int cti_plat_get_hw_data(struct device *dev,
-			 struct cti_drvdata *drvdata)
+static int cti_plat_get_hw_data(struct device *dev, struct cti_drvdata *drvdata)
 {
 	int rc = 0;
 	struct cti_device *cti_dev = &drvdata->ctidev;
diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c
index 1f8fb7c15e80..392757f3a019 100644
--- a/drivers/hwtracing/coresight/coresight-cti-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c
@@ -4,7 +4,13 @@
  * Author: Mike Leach <mike.leach@linaro.org>
  */
 
+#include <linux/atomic.h>
 #include <linux/coresight.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
 
 #include "coresight-cti.h"
 
@@ -1036,8 +1042,8 @@ static int cti_create_con_sysfs_attr(struct device *dev,
 				     enum cti_conn_attr_type attr_type,
 				     int attr_idx)
 {
-	struct dev_ext_attribute *eattr = 0;
-	char *name = 0;
+	struct dev_ext_attribute *eattr;
+	char *name;
 
 	eattr = devm_kzalloc(dev, sizeof(struct dev_ext_attribute),
 				    GFP_KERNEL);
@@ -1139,7 +1145,7 @@ static int cti_create_con_attr_set(struct device *dev, int con_idx,
 }
 
 /* create the array of group pointers for the CTI sysfs groups */
-int cti_create_cons_groups(struct device *dev, struct cti_device *ctidev)
+static int cti_create_cons_groups(struct device *dev, struct cti_device *ctidev)
 {
 	int nr_groups;
 
@@ -1156,8 +1162,8 @@ int cti_create_cons_groups(struct device *dev, struct cti_device *ctidev)
 int cti_create_cons_sysfs(struct device *dev, struct cti_drvdata *drvdata)
 {
 	struct cti_device *ctidev = &drvdata->ctidev;
-	int err = 0, con_idx = 0, i;
-	struct cti_trig_con *tc = NULL;
+	int err, con_idx = 0, i;
+	struct cti_trig_con *tc;
 
 	err = cti_create_cons_groups(dev, ctidev);
 	if (err)
diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c
index aa6e0249bd70..be61c1705916 100644
--- a/drivers/hwtracing/coresight/coresight-cti.c
+++ b/drivers/hwtracing/coresight/coresight-cti.c
@@ -4,7 +4,20 @@
  * Author: Mike Leach <mike.leach@linaro.org>
  */
 
+#include <linux/amba/bus.h>
+#include <linux/atomic.h>
+#include <linux/bits.h>
+#include <linux/coresight.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
+#include <linux/spinlock.h>
+
+#include "coresight-priv.h"
 #include "coresight-cti.h"
 
 /**
@@ -19,7 +32,7 @@
  */
 
 /* net of CTI devices connected via CTM */
-LIST_HEAD(ect_net);
+static LIST_HEAD(ect_net);
 
 /* protect the list */
 static DEFINE_MUTEX(ect_mutex);
@@ -442,6 +455,34 @@ int cti_channel_setop(struct device *dev, enum cti_chan_set_op op,
 	return err;
 }
 
+static bool cti_add_sysfs_link(struct cti_drvdata *drvdata,
+			       struct cti_trig_con *tc)
+{
+	struct coresight_sysfs_link link_info;
+	int link_err = 0;
+
+	link_info.orig = drvdata->csdev;
+	link_info.orig_name = tc->con_dev_name;
+	link_info.target = tc->con_dev;
+	link_info.target_name = dev_name(&drvdata->csdev->dev);
+
+	link_err = coresight_add_sysfs_link(&link_info);
+	if (link_err)
+		dev_warn(&drvdata->csdev->dev,
+			 "Failed to set CTI sysfs link %s<=>%s\n",
+			 link_info.orig_name, link_info.target_name);
+	return !link_err;
+}
+
+static void cti_remove_sysfs_link(struct cti_trig_con *tc)
+{
+	struct coresight_sysfs_link link_info;
+
+	link_info.orig_name = tc->con_dev_name;
+	link_info.target = tc->con_dev;
+	coresight_remove_sysfs_link(&link_info);
+}
+
 /*
  * Look for a matching connection device name in the list of connections.
  * If found then swap in the csdev name, set trig con association pointer
@@ -452,6 +493,8 @@ cti_match_fixup_csdev(struct cti_device *ctidev, const char *node_name,
 		      struct coresight_device *csdev)
 {
 	struct cti_trig_con *tc;
+	struct cti_drvdata *drvdata = container_of(ctidev, struct cti_drvdata,
+						   ctidev);
 
 	list_for_each_entry(tc, &ctidev->trig_cons, node) {
 		if (tc->con_dev_name) {
@@ -459,7 +502,12 @@ cti_match_fixup_csdev(struct cti_device *ctidev, const char *node_name,
 				/* match: so swap in csdev name & dev */
 				tc->con_dev_name = dev_name(&csdev->dev);
 				tc->con_dev = csdev;
-				return true;
+				/* try to set sysfs link */
+				if (cti_add_sysfs_link(drvdata, tc))
+					return true;
+				/* link failed - remove CTI reference */
+				tc->con_dev = NULL;
+				break;
 			}
 		}
 	}
@@ -522,6 +570,7 @@ void cti_remove_assoc_from_csdev(struct coresight_device *csdev)
 		ctidev = &ctidrv->ctidev;
 		list_for_each_entry(tc, &ctidev->trig_cons, node) {
 			if (tc->con_dev == csdev->ect_dev) {
+				cti_remove_sysfs_link(tc);
 				tc->con_dev = NULL;
 				break;
 			}
@@ -543,10 +592,16 @@ static void cti_update_conn_xrefs(struct cti_drvdata *drvdata)
 	struct cti_device *ctidev = &drvdata->ctidev;
 
 	list_for_each_entry(tc, &ctidev->trig_cons, node) {
-		if (tc->con_dev)
-			/* set tc->con_dev->ect_dev */
-			coresight_set_assoc_ectdev_mutex(tc->con_dev,
+		if (tc->con_dev) {
+			/* if we can set the sysfs link */
+			if (cti_add_sysfs_link(drvdata, tc))
+				/* set the CTI/csdev association */
+				coresight_set_assoc_ectdev_mutex(tc->con_dev,
 							 drvdata->csdev);
+			else
+				/* otherwise remove reference from CTI */
+				tc->con_dev = NULL;
+		}
 	}
 }
 
@@ -559,6 +614,8 @@ static void cti_remove_conn_xrefs(struct cti_drvdata *drvdata)
 		if (tc->con_dev) {
 			coresight_set_assoc_ectdev_mutex(tc->con_dev,
 							 NULL);
+			cti_remove_sysfs_link(tc);
+			tc->con_dev = NULL;
 		}
 	}
 }
@@ -578,12 +635,12 @@ int cti_disable(struct coresight_device *csdev)
 	return cti_disable_hw(drvdata);
 }
 
-const struct coresight_ops_ect cti_ops_ect = {
+static const struct coresight_ops_ect cti_ops_ect = {
 	.enable = cti_enable,
 	.disable = cti_disable,
 };
 
-const struct coresight_ops cti_ops = {
+static const struct coresight_ops cti_ops = {
 	.ect_ops = &cti_ops_ect,
 };
 
diff --git a/drivers/hwtracing/coresight/coresight-cti.h b/drivers/hwtracing/coresight/coresight-cti.h
index 004df3ab9dd0..acf7b545e6b9 100644
--- a/drivers/hwtracing/coresight/coresight-cti.h
+++ b/drivers/hwtracing/coresight/coresight-cti.h
@@ -7,8 +7,14 @@
 #ifndef _CORESIGHT_CORESIGHT_CTI_H
 #define _CORESIGHT_CORESIGHT_CTI_H
 
-#include <asm/local.h>
+#include <linux/coresight.h>
+#include <linux/device.h>
+#include <linux/fwnode.h>
+#include <linux/list.h>
 #include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
 #include "coresight-priv.h"
 
 /*
diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c
index 3810290e6d07..03e3f2590191 100644
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@@ -717,7 +717,7 @@ static const struct attribute_group coresight_etb_mgmt_group = {
 	.name = "mgmt",
 };
 
-const struct attribute_group *coresight_etb_groups[] = {
+static const struct attribute_group *coresight_etb_groups[] = {
 	&coresight_etb_group,
 	&coresight_etb_mgmt_group,
 	NULL,
diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c
index e2cb6873c3f2..bf22dcfd3327 100644
--- a/drivers/hwtracing/coresight/coresight-etm3x.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x.c
@@ -504,7 +504,7 @@ static int etm_enable_perf(struct coresight_device *csdev,
 static int etm_enable_sysfs(struct coresight_device *csdev)
 {
 	struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
-	struct etm_enable_arg arg = { 0 };
+	struct etm_enable_arg arg = { };
 	int ret;
 
 	spin_lock(&drvdata->spinlock);
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index ce41482431f9..b673e738bc9a 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -205,7 +205,7 @@ static ssize_t reset_store(struct device *dev,
 	 * started state. ARM recommends start-stop logic is set before
 	 * each trace run.
 	 */
-	config->vinst_ctrl |= BIT(0);
+	config->vinst_ctrl = BIT(0);
 	if (drvdata->nr_addr_cmp == true) {
 		config->mode |= ETM_MODE_VIEWINST_STARTSTOP;
 		/* SSSTATUS, bit[9] */
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index a90d757f7043..fb0f5f4f3a91 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -412,7 +412,7 @@ static int etm4_enable_perf(struct coresight_device *csdev,
 static int etm4_enable_sysfs(struct coresight_device *csdev)
 {
 	struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
-	struct etm4_enable_arg arg = { 0 };
+	struct etm4_enable_arg arg = { };
 	int ret;
 
 	spin_lock(&drvdata->spinlock);
@@ -791,7 +791,7 @@ static void etm4_set_default_config(struct etmv4_config *config)
 	config->ts_ctrl = 0x0;
 
 	/* TRCVICTLR::EVENT = 0x01, select the always on logic */
-	config->vinst_ctrl |= BIT(0);
+	config->vinst_ctrl = BIT(0);
 }
 
 static u64 etm4_get_ns_access_type(struct etmv4_config *config)
@@ -894,17 +894,8 @@ static void etm4_set_start_stop_filter(struct etmv4_config *config,
 
 static void etm4_set_default_filter(struct etmv4_config *config)
 {
-	u64 start, stop;
-
-	/*
-	 * Configure address range comparator '0' to encompass all
-	 * possible addresses.
-	 */
-	start = 0x0;
-	stop = ~0x0;
-
-	etm4_set_comparator_filter(config, start, stop,
-				   ETM_DEFAULT_ADDR_COMP);
+	/* Trace everything 'default' filter achieved by no filtering */
+	config->viiectlr = 0x0;
 
 	/*
 	 * TRCVICTLR::SSSTATUS == 1, the start-stop logic is
@@ -925,11 +916,9 @@ static void etm4_set_default(struct etmv4_config *config)
 	/*
 	 * Make default initialisation trace everything
 	 *
-	 * Select the "always true" resource selector on the
-	 * "Enablign Event" line and configure address range comparator
-	 * '0' to trace all the possible address range.  From there
-	 * configure the "include/exclude" engine to include address
-	 * range comparator '0'.
+	 * This is done by a minimum default config sufficient to enable
+	 * full instruction trace - with a default filter for trace all
+	 * achieved by having no filtering.
 	 */
 	etm4_set_default_config(config);
 	etm4_set_default_filter(config);
@@ -1552,10 +1541,13 @@ static const struct amba_id etm4_ids[] = {
 	CS_AMBA_ID(0x000bb95a),			/* Cortex-A72 */
 	CS_AMBA_ID(0x000bb959),			/* Cortex-A73 */
 	CS_AMBA_UCI_ID(0x000bb9da, uci_id_etm4),/* Cortex-A35 */
+	CS_AMBA_UCI_ID(0x000bbd0c, uci_id_etm4),/* Neoverse N1 */
 	CS_AMBA_UCI_ID(0x000f0205, uci_id_etm4),/* Qualcomm Kryo */
 	CS_AMBA_UCI_ID(0x000f0211, uci_id_etm4),/* Qualcomm Kryo */
-	CS_AMBA_ID(0x000bb802),			/* Qualcomm Kryo 385 Cortex-A55 */
-	CS_AMBA_ID(0x000bb803),			/* Qualcomm Kryo 385 Cortex-A75 */
+	CS_AMBA_UCI_ID(0x000bb802, uci_id_etm4),/* Qualcomm Kryo 385 Cortex-A55 */
+	CS_AMBA_UCI_ID(0x000bb803, uci_id_etm4),/* Qualcomm Kryo 385 Cortex-A75 */
+	CS_AMBA_UCI_ID(0x000bb805, uci_id_etm4),/* Qualcomm Kryo 4XX Cortex-A55 */
+	CS_AMBA_UCI_ID(0x000bb804, uci_id_etm4),/* Qualcomm Kryo 4XX Cortex-A76 */
 	CS_AMBA_UCI_ID(0x000cc0af, uci_id_etm4),/* Marvell ThunderX2 */
 	{},
 };
diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c
index 43418a2126ff..e4912abda3aa 100644
--- a/drivers/hwtracing/coresight/coresight-platform.c
+++ b/drivers/hwtracing/coresight/coresight-platform.c
@@ -87,6 +87,7 @@ static void of_coresight_get_ports_legacy(const struct device_node *node,
 					  int *nr_inport, int *nr_outport)
 {
 	struct device_node *ep = NULL;
+	struct of_endpoint endpoint;
 	int in = 0, out = 0;
 
 	do {
@@ -94,10 +95,16 @@ static void of_coresight_get_ports_legacy(const struct device_node *node,
 		if (!ep)
 			break;
 
-		if (of_coresight_legacy_ep_is_input(ep))
-			in++;
-		else
-			out++;
+		if (of_graph_parse_endpoint(ep, &endpoint))
+			continue;
+
+		if (of_coresight_legacy_ep_is_input(ep)) {
+			in = (endpoint.port + 1 > in) ?
+				endpoint.port + 1 : in;
+		} else {
+			out = (endpoint.port + 1) > out ?
+				endpoint.port + 1 : out;
+		}
 
 	} while (ep);
 
@@ -137,9 +144,16 @@ of_coresight_count_ports(struct device_node *port_parent)
 {
 	int i = 0;
 	struct device_node *ep = NULL;
+	struct of_endpoint endpoint;
+
+	while ((ep = of_graph_get_next_endpoint(port_parent, ep))) {
+		/* Defer error handling to parsing */
+		if (of_graph_parse_endpoint(ep, &endpoint))
+			continue;
+		if (endpoint.port + 1 > i)
+			i = endpoint.port + 1;
+	}
 
-	while ((ep = of_graph_get_next_endpoint(port_parent, ep)))
-		i++;
 	return i;
 }
 
@@ -191,14 +205,12 @@ static int of_coresight_get_cpu(struct device *dev)
  * Parses the local port, remote device name and the remote port.
  *
  * Returns :
- *	 1	- If the parsing is successful and a connection record
- *		  was created for an output connection.
  *	 0	- If the parsing completed without any fatal errors.
  *	-Errno	- Fatal error, abort the scanning.
  */
 static int of_coresight_parse_endpoint(struct device *dev,
 				       struct device_node *ep,
-				       struct coresight_connection *conn)
+				       struct coresight_platform_data *pdata)
 {
 	int ret = 0;
 	struct of_endpoint endpoint, rendpoint;
@@ -206,6 +218,7 @@ static int of_coresight_parse_endpoint(struct device *dev,
 	struct device_node *rep = NULL;
 	struct device *rdev = NULL;
 	struct fwnode_handle *rdev_fwnode;
+	struct coresight_connection *conn;
 
 	do {
 		/* Parse the local port details */
@@ -232,6 +245,13 @@ static int of_coresight_parse_endpoint(struct device *dev,
 			break;
 		}
 
+		conn = &pdata->conns[endpoint.port];
+		if (conn->child_fwnode) {
+			dev_warn(dev, "Duplicate output port %d\n",
+				 endpoint.port);
+			ret = -EINVAL;
+			break;
+		}
 		conn->outport = endpoint.port;
 		/*
 		 * Hold the refcount to the target device. This could be
@@ -244,7 +264,6 @@ static int of_coresight_parse_endpoint(struct device *dev,
 		conn->child_fwnode = fwnode_handle_get(rdev_fwnode);
 		conn->child_port = rendpoint.port;
 		/* Connection record updated */
-		ret = 1;
 	} while (0);
 
 	of_node_put(rparent);
@@ -258,7 +277,6 @@ static int of_get_coresight_platform_data(struct device *dev,
 					  struct coresight_platform_data *pdata)
 {
 	int ret = 0;
-	struct coresight_connection *conn;
 	struct device_node *ep = NULL;
 	const struct device_node *parent = NULL;
 	bool legacy_binding = false;
@@ -287,8 +305,6 @@ static int of_get_coresight_platform_data(struct device *dev,
 		dev_warn_once(dev, "Uses obsolete Coresight DT bindings\n");
 	}
 
-	conn = pdata->conns;
-
 	/* Iterate through each output port to discover topology */
 	while ((ep = of_graph_get_next_endpoint(parent, ep))) {
 		/*
@@ -300,15 +316,9 @@ static int of_get_coresight_platform_data(struct device *dev,
 		if (legacy_binding && of_coresight_legacy_ep_is_input(ep))
 			continue;
 
-		ret = of_coresight_parse_endpoint(dev, ep, conn);
-		switch (ret) {
-		case 1:
-			conn++;		/* Fall through */
-		case 0:
-			break;
-		default:
+		ret = of_coresight_parse_endpoint(dev, ep, pdata);
+		if (ret)
 			return ret;
-		}
 	}
 
 	return 0;
@@ -501,7 +511,7 @@ static inline bool acpi_validate_dsd_graph(const union acpi_object *graph)
 }
 
 /* acpi_get_dsd_graph	- Find the _DSD Graph property for the given device. */
-const union acpi_object *
+static const union acpi_object *
 acpi_get_dsd_graph(struct acpi_device *adev)
 {
 	int i;
@@ -564,7 +574,7 @@ acpi_validate_coresight_graph(const union acpi_object *cs_graph)
  * Returns the pointer to the CoreSight Graph Package when found. Otherwise
  * returns NULL.
  */
-const union acpi_object *
+static const union acpi_object *
 acpi_get_coresight_graph(struct acpi_device *adev)
 {
 	const union acpi_object *graph_list, *graph;
@@ -647,6 +657,16 @@ static int acpi_coresight_parse_link(struct acpi_device *adev,
 		 *    coresight_remove_match().
 		 */
 		conn->child_fwnode = fwnode_handle_get(&r_adev->fwnode);
+	} else if (dir == ACPI_CORESIGHT_LINK_SLAVE) {
+		/*
+		 * We are only interested in the port number
+		 * for the input ports at this component.
+		 * Store the port number in child_port.
+		 */
+		conn->child_port = fields[0].integer.value;
+	} else {
+		/* Invalid direction */
+		return -EINVAL;
 	}
 
 	return dir;
@@ -692,10 +712,20 @@ static int acpi_coresight_parse_graph(struct acpi_device *adev,
 			return dir;
 
 		if (dir == ACPI_CORESIGHT_LINK_MASTER) {
-			pdata->nr_outport++;
+			if (ptr->outport > pdata->nr_outport)
+				pdata->nr_outport = ptr->outport;
 			ptr++;
 		} else {
-			pdata->nr_inport++;
+			WARN_ON(pdata->nr_inport == ptr->child_port);
+			/*
+			 * We do not track input port connections for a device.
+			 * However we need the highest port number described,
+			 * which can be recorded now and reuse this connection
+			 * record for an output connection. Hence, do not move
+			 * the ptr for input connections
+			 */
+			if (ptr->child_port > pdata->nr_inport)
+				pdata->nr_inport = ptr->child_port;
 		}
 	}
 
@@ -704,8 +734,13 @@ static int acpi_coresight_parse_graph(struct acpi_device *adev,
 		return rc;
 
 	/* Copy the connection information to the final location */
-	for (i = 0; i < pdata->nr_outport; i++)
-		pdata->conns[i] = conns[i];
+	for (i = 0; conns + i < ptr; i++) {
+		int port = conns[i].outport;
+
+		/* Duplicate output port */
+		WARN_ON(pdata->conns[port].child_fwnode);
+		pdata->conns[port] = conns[i];
+	}
 
 	devm_kfree(&adev->dev, conns);
 	return 0;
@@ -822,7 +857,7 @@ coresight_get_platform_data(struct device *dev)
 error:
 	if (!IS_ERR_OR_NULL(pdata))
 		/* Cleanup the connection information */
-		coresight_release_platform_data(pdata);
+		coresight_release_platform_data(NULL, pdata);
 	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(coresight_get_platform_data);
diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h
index 890f9a5c97c6..36c943ae94d5 100644
--- a/drivers/hwtracing/coresight/coresight-priv.h
+++ b/drivers/hwtracing/coresight/coresight-priv.h
@@ -153,6 +153,15 @@ struct coresight_device *coresight_get_sink_by_id(u32 id);
 struct list_head *coresight_build_path(struct coresight_device *csdev,
 				       struct coresight_device *sink);
 void coresight_release_path(struct list_head *path);
+int coresight_add_sysfs_link(struct coresight_sysfs_link *info);
+void coresight_remove_sysfs_link(struct coresight_sysfs_link *info);
+int coresight_create_conns_sysfs_group(struct coresight_device *csdev);
+void coresight_remove_conns_sysfs_group(struct coresight_device *csdev);
+int coresight_make_links(struct coresight_device *orig,
+			 struct coresight_connection *conn,
+			 struct coresight_device *target);
+void coresight_remove_links(struct coresight_device *orig,
+			    struct coresight_connection *conn);
 
 #ifdef CONFIG_CORESIGHT_SOURCE_ETM3X
 extern int etm_readl_cp14(u32 off, unsigned int *val);
@@ -206,12 +215,16 @@ cti_remove_assoc_from_csdev(struct coresight_device *csdev) {}
 /* extract the data value from a UCI structure given amba_id pointer. */
 static inline void *coresight_get_uci_data(const struct amba_id *id)
 {
-	if (id->data)
-		return ((struct amba_cs_uci_id *)(id->data))->data;
-	return 0;
+	struct amba_cs_uci_id *uci_id = id->data;
+
+	if (!uci_id)
+		return NULL;
+
+	return uci_id->data;
 }
 
-void coresight_release_platform_data(struct coresight_platform_data *pdata);
+void coresight_release_platform_data(struct coresight_device *csdev,
+				     struct coresight_platform_data *pdata);
 struct coresight_device *
 coresight_find_csdev_by_fwnode(struct fwnode_handle *r_fwnode);
 void coresight_set_assoc_ectdev_mutex(struct coresight_device *csdev,
diff --git a/drivers/hwtracing/coresight/coresight-sysfs.c b/drivers/hwtracing/coresight/coresight-sysfs.c
new file mode 100644
index 000000000000..82afeaf2ccc4
--- /dev/null
+++ b/drivers/hwtracing/coresight/coresight-sysfs.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Limited, All rights reserved.
+ * Author: Mike Leach <mike.leach@linaro.org>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+
+#include "coresight-priv.h"
+
+/*
+ * Connections group - links attribute.
+ * Count of created links between coresight components in the group.
+ */
+static ssize_t nr_links_show(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	struct coresight_device *csdev = to_coresight_device(dev);
+
+	return sprintf(buf, "%d\n", csdev->nr_links);
+}
+static DEVICE_ATTR_RO(nr_links);
+
+static struct attribute *coresight_conns_attrs[] = {
+	&dev_attr_nr_links.attr,
+	NULL,
+};
+
+static struct attribute_group coresight_conns_group = {
+	.attrs = coresight_conns_attrs,
+	.name = "connections",
+};
+
+/*
+ * Create connections group for CoreSight devices.
+ * This group will then be used to collate the sysfs links between
+ * devices.
+ */
+int coresight_create_conns_sysfs_group(struct coresight_device *csdev)
+{
+	int ret = 0;
+
+	if (!csdev)
+		return -EINVAL;
+
+	ret = sysfs_create_group(&csdev->dev.kobj, &coresight_conns_group);
+	if (ret)
+		return ret;
+
+	csdev->has_conns_grp = true;
+	return ret;
+}
+
+void coresight_remove_conns_sysfs_group(struct coresight_device *csdev)
+{
+	if (!csdev)
+		return;
+
+	if (csdev->has_conns_grp) {
+		sysfs_remove_group(&csdev->dev.kobj, &coresight_conns_group);
+		csdev->has_conns_grp = false;
+	}
+}
+
+int coresight_add_sysfs_link(struct coresight_sysfs_link *info)
+{
+	int ret = 0;
+
+	if (!info)
+		return -EINVAL;
+	if (!info->orig || !info->target ||
+	    !info->orig_name || !info->target_name)
+		return -EINVAL;
+	if (!info->orig->has_conns_grp || !info->target->has_conns_grp)
+		return -EINVAL;
+
+	/* first link orig->target */
+	ret = sysfs_add_link_to_group(&info->orig->dev.kobj,
+				      coresight_conns_group.name,
+				      &info->target->dev.kobj,
+				      info->orig_name);
+	if (ret)
+		return ret;
+
+	/* second link target->orig */
+	ret = sysfs_add_link_to_group(&info->target->dev.kobj,
+				      coresight_conns_group.name,
+				      &info->orig->dev.kobj,
+				      info->target_name);
+
+	/* error in second link - remove first - otherwise inc counts */
+	if (ret) {
+		sysfs_remove_link_from_group(&info->orig->dev.kobj,
+					     coresight_conns_group.name,
+					     info->orig_name);
+	} else {
+		info->orig->nr_links++;
+		info->target->nr_links++;
+	}
+
+	return ret;
+}
+
+void coresight_remove_sysfs_link(struct coresight_sysfs_link *info)
+{
+	if (!info)
+		return;
+	if (!info->orig || !info->target ||
+	    !info->orig_name || !info->target_name)
+		return;
+
+	sysfs_remove_link_from_group(&info->orig->dev.kobj,
+				     coresight_conns_group.name,
+				     info->orig_name);
+
+	sysfs_remove_link_from_group(&info->target->dev.kobj,
+				     coresight_conns_group.name,
+				     info->target_name);
+
+	info->orig->nr_links--;
+	info->target->nr_links--;
+}
+
+/*
+ * coresight_make_links: Make a link for a connection from a @orig
+ * device to @target, represented by @conn.
+ *
+ *   e.g, for devOrig[output_X] -> devTarget[input_Y] is represented
+ *   as two symbolic links :
+ *
+ *	/sys/.../devOrig/out:X	-> /sys/.../devTarget/
+ *	/sys/.../devTarget/in:Y	-> /sys/.../devOrig/
+ *
+ * The link names are allocated for a device where it appears. i.e, the
+ * "out" link on the master and "in" link on the slave device.
+ * The link info is stored in the connection record for avoiding
+ * the reconstruction of names for removal.
+ */
+int coresight_make_links(struct coresight_device *orig,
+			 struct coresight_connection *conn,
+			 struct coresight_device *target)
+{
+	int ret = -ENOMEM;
+	char *outs = NULL, *ins = NULL;
+	struct coresight_sysfs_link *link = NULL;
+
+	do {
+		outs = devm_kasprintf(&orig->dev, GFP_KERNEL,
+				      "out:%d", conn->outport);
+		if (!outs)
+			break;
+		ins = devm_kasprintf(&target->dev, GFP_KERNEL,
+				     "in:%d", conn->child_port);
+		if (!ins)
+			break;
+		link = devm_kzalloc(&orig->dev,
+				    sizeof(struct coresight_sysfs_link),
+				    GFP_KERNEL);
+		if (!link)
+			break;
+
+		link->orig = orig;
+		link->target = target;
+		link->orig_name = outs;
+		link->target_name = ins;
+
+		ret = coresight_add_sysfs_link(link);
+		if (ret)
+			break;
+
+		conn->link = link;
+
+		/*
+		 * Install the device connection. This also indicates that
+		 * the links are operational on both ends.
+		 */
+		conn->child_dev = target;
+		return 0;
+	} while (0);
+
+	return ret;
+}
+
+/*
+ * coresight_remove_links: Remove the sysfs links for a given connection @conn,
+ * from @orig device to @target device. See coresight_make_links() for more
+ * details.
+ */
+void coresight_remove_links(struct coresight_device *orig,
+			    struct coresight_connection *conn)
+{
+	if (!orig || !conn->link)
+		return;
+
+	coresight_remove_sysfs_link(conn->link);
+
+	devm_kfree(&conn->child_dev->dev, conn->link->target_name);
+	devm_kfree(&orig->dev, conn->link->orig_name);
+	devm_kfree(&orig->dev, conn->link);
+	conn->link = NULL;
+	conn->child_dev = NULL;
+}
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
index d0cc3985b72a..36cce2bfb744 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@@ -596,13 +596,6 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
 		goto out;
 	}
 
-	/* There is no point in reading a TMC in HW FIFO mode */
-	mode = readl_relaxed(drvdata->base + TMC_MODE);
-	if (mode != TMC_MODE_CIRCULAR_BUFFER) {
-		ret = -EINVAL;
-		goto out;
-	}
-
 	/* Don't interfere if operated from Perf */
 	if (drvdata->mode == CS_MODE_PERF) {
 		ret = -EINVAL;
@@ -616,8 +609,15 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
 	}
 
 	/* Disable the TMC if need be */
-	if (drvdata->mode == CS_MODE_SYSFS)
+	if (drvdata->mode == CS_MODE_SYSFS) {
+		/* There is no point in reading a TMC in HW FIFO mode */
+		mode = readl_relaxed(drvdata->base + TMC_MODE);
+		if (mode != TMC_MODE_CIRCULAR_BUFFER) {
+			ret = -EINVAL;
+			goto out;
+		}
 		__tmc_etb_disable_hw(drvdata);
+	}
 
 	drvdata->reading = true;
 out:
diff --git a/drivers/hwtracing/coresight/coresight-tmc.c b/drivers/hwtracing/coresight/coresight-tmc.c
index 1cf82fa58289..39fba1d16e6e 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.c
+++ b/drivers/hwtracing/coresight/coresight-tmc.c
@@ -361,7 +361,7 @@ static const struct attribute_group coresight_tmc_mgmt_group = {
 	.name = "mgmt",
 };
 
-const struct attribute_group *coresight_tmc_groups[] = {
+static const struct attribute_group *coresight_tmc_groups[] = {
 	&coresight_tmc_group,
 	&coresight_tmc_mgmt_group,
 	NULL,
diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c
index c71553c09f8e..f3efbb3b2b4d 100644
--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@@ -1031,7 +1031,7 @@ static void coresight_device_release(struct device *dev)
 
 static int coresight_orphan_match(struct device *dev, void *data)
 {
-	int i;
+	int i, ret = 0;
 	bool still_orphan = false;
 	struct coresight_device *csdev, *i_csdev;
 	struct coresight_connection *conn;
@@ -1053,49 +1053,62 @@ static int coresight_orphan_match(struct device *dev, void *data)
 	for (i = 0; i < i_csdev->pdata->nr_outport; i++) {
 		conn = &i_csdev->pdata->conns[i];
 
+		/* Skip the port if FW doesn't describe it */
+		if (!conn->child_fwnode)
+			continue;
 		/* We have found at least one orphan connection */
 		if (conn->child_dev == NULL) {
 			/* Does it match this newly added device? */
-			if (conn->child_fwnode == csdev->dev.fwnode)
-				conn->child_dev = csdev;
-			else
+			if (conn->child_fwnode == csdev->dev.fwnode) {
+				ret = coresight_make_links(i_csdev,
+							   conn, csdev);
+				if (ret)
+					return ret;
+			} else {
 				/* This component still has an orphan */
 				still_orphan = true;
+			}
 		}
 	}
 
 	i_csdev->orphan = still_orphan;
 
 	/*
-	 * Returning '0' ensures that all known component on the
-	 * bus will be checked.
+	 * Returning '0' in case we didn't encounter any error,
+	 * ensures that all known component on the bus will be checked.
 	 */
 	return 0;
 }
 
-static void coresight_fixup_orphan_conns(struct coresight_device *csdev)
+static int coresight_fixup_orphan_conns(struct coresight_device *csdev)
 {
-	/*
-	 * No need to check for a return value as orphan connection(s)
-	 * are hooked-up with each newly added component.
-	 */
-	bus_for_each_dev(&coresight_bustype, NULL,
+	return bus_for_each_dev(&coresight_bustype, NULL,
 			 csdev, coresight_orphan_match);
 }
 
 
-static void coresight_fixup_device_conns(struct coresight_device *csdev)
+static int coresight_fixup_device_conns(struct coresight_device *csdev)
 {
-	int i;
+	int i, ret = 0;
 
 	for (i = 0; i < csdev->pdata->nr_outport; i++) {
 		struct coresight_connection *conn = &csdev->pdata->conns[i];
 
+		if (!conn->child_fwnode)
+			continue;
 		conn->child_dev =
 			coresight_find_csdev_by_fwnode(conn->child_fwnode);
-		if (!conn->child_dev)
+		if (conn->child_dev) {
+			ret = coresight_make_links(csdev, conn,
+						   conn->child_dev);
+			if (ret)
+				break;
+		} else {
 			csdev->orphan = true;
+		}
 	}
+
+	return 0;
 }
 
 static int coresight_remove_match(struct device *dev, void *data)
@@ -1118,12 +1131,12 @@ static int coresight_remove_match(struct device *dev, void *data)
 	for (i = 0; i < iterator->pdata->nr_outport; i++) {
 		conn = &iterator->pdata->conns[i];
 
-		if (conn->child_dev == NULL)
+		if (conn->child_dev == NULL || conn->child_fwnode == NULL)
 			continue;
 
 		if (csdev->dev.fwnode == conn->child_fwnode) {
 			iterator->orphan = true;
-			conn->child_dev = NULL;
+			coresight_remove_links(iterator, conn);
 			/*
 			 * Drop the reference to the handle for the remote
 			 * device acquired in parsing the connections from
@@ -1213,16 +1226,27 @@ postcore_initcall(coresight_init);
  * coresight_release_platform_data: Release references to the devices connected
  * to the output port of this device.
  */
-void coresight_release_platform_data(struct coresight_platform_data *pdata)
+void coresight_release_platform_data(struct coresight_device *csdev,
+				     struct coresight_platform_data *pdata)
 {
 	int i;
+	struct coresight_connection *conns = pdata->conns;
 
 	for (i = 0; i < pdata->nr_outport; i++) {
-		if (pdata->conns[i].child_fwnode) {
-			fwnode_handle_put(pdata->conns[i].child_fwnode);
+		/* If we have made the links, remove them now */
+		if (csdev && conns[i].child_dev)
+			coresight_remove_links(csdev, &conns[i]);
+		/*
+		 * Drop the refcount and clear the handle as this device
+		 * is going away
+		 */
+		if (conns[i].child_fwnode) {
+			fwnode_handle_put(conns[i].child_fwnode);
 			pdata->conns[i].child_fwnode = NULL;
 		}
 	}
+	if (csdev)
+		coresight_remove_conns_sysfs_group(csdev);
 }
 
 struct coresight_device *coresight_register(struct coresight_desc *desc)
@@ -1304,11 +1328,19 @@ struct coresight_device *coresight_register(struct coresight_desc *desc)
 
 	mutex_lock(&coresight_mutex);
 
-	coresight_fixup_device_conns(csdev);
-	coresight_fixup_orphan_conns(csdev);
-	cti_add_assoc_to_csdev(csdev);
+	ret = coresight_create_conns_sysfs_group(csdev);
+	if (!ret)
+		ret = coresight_fixup_device_conns(csdev);
+	if (!ret)
+		ret = coresight_fixup_orphan_conns(csdev);
+	if (!ret)
+		cti_add_assoc_to_csdev(csdev);
 
 	mutex_unlock(&coresight_mutex);
+	if (ret) {
+		coresight_unregister(csdev);
+		return ERR_PTR(ret);
+	}
 
 	return csdev;
 
@@ -1316,7 +1348,7 @@ struct coresight_device *coresight_register(struct coresight_desc *desc)
 	kfree(csdev);
 err_out:
 	/* Cleanup the connection information */
-	coresight_release_platform_data(desc->pdata);
+	coresight_release_platform_data(NULL, desc->pdata);
 	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(coresight_register);
@@ -1326,7 +1358,7 @@ void coresight_unregister(struct coresight_device *csdev)
 	etm_perf_del_symlink_sink(csdev);
 	/* Remove references of that device in the topology */
 	coresight_remove_conns(csdev);
-	coresight_release_platform_data(csdev->pdata);
+	coresight_release_platform_data(csdev, csdev->pdata);
 	device_unregister(&csdev->dev);
 }
 EXPORT_SYMBOL_GPL(coresight_unregister);
diff --git a/drivers/hwtracing/stm/policy.c b/drivers/hwtracing/stm/policy.c
index 4f932a419752..603b4a9969d3 100644
--- a/drivers/hwtracing/stm/policy.c
+++ b/drivers/hwtracing/stm/policy.c
@@ -34,7 +34,7 @@ struct stp_policy_node {
 	unsigned int		first_channel;
 	unsigned int		last_channel;
 	/* this is the one that's exposed to the attributes */
-	unsigned char		priv[0];
+	unsigned char		priv[];
 };
 
 void *stp_policy_node_priv(struct stp_policy_node *pn)
diff --git a/drivers/hwtracing/stm/stm.h b/drivers/hwtracing/stm/stm.h
index 3569439d53bb..a9be49fc7a6b 100644
--- a/drivers/hwtracing/stm/stm.h
+++ b/drivers/hwtracing/stm/stm.h
@@ -23,7 +23,7 @@ void *stp_policy_node_priv(struct stp_policy_node *pn);
 
 struct stp_master {
 	unsigned int	nr_free;
-	unsigned long	chan_map[0];
+	unsigned long	chan_map[];
 };
 
 struct stm_device {
@@ -42,7 +42,7 @@ struct stm_device {
 	const struct config_item_type		*pdrv_node_type;
 	/* master allocation */
 	spinlock_t		mc_lock;
-	struct stp_master	*masters[0];
+	struct stp_master	*masters[];
 };
 
 #define to_stm_device(_d)				\
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2ddca08f8a76..2f6e39b41e6c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -475,8 +475,8 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
-		   COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC || \
+		   ARCH_BCM_63XX || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
@@ -885,6 +885,16 @@ config I2C_PXA_SLAVE
 	  is necessary for systems where the PXA may be a target on the
 	  I2C bus.
 
+config I2C_QCOM_CCI
+	tristate "Qualcomm Camera Control Interface"
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in camera control interface on the Qualcomm SoCs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-qcom-cci.
+
 config I2C_QCOM_GENI
 	tristate "Qualcomm Technologies Inc.'s GENI based I2C controller"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 25d60889713c..c852d2737037 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
+obj-$(CONFIG_I2C_QCOM_CCI)	+= i2c-qcom-cci.o
 obj-$(CONFIG_I2C_QCOM_GENI)	+= i2c-qcom-geni.o
 obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
 obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c
index f5c00f903df3..d40d6691dbb9 100644
--- a/drivers/i2c/busses/i2c-altera.c
+++ b/drivers/i2c/busses/i2c-altera.c
@@ -382,23 +382,19 @@ static const struct i2c_algorithm altr_i2c_algo = {
 static int altr_i2c_probe(struct platform_device *pdev)
 {
 	struct altr_i2c_dev *idev = NULL;
-	struct resource *res;
 	int irq, ret;
 
 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
 	if (!idev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	idev->base = devm_ioremap_resource(&pdev->dev, res);
+	idev->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(idev->base))
 		return PTR_ERR(idev->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "missing interrupt resource\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	idev->i2c_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(idev->i2c_clk)) {
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index be3681d08a8d..5294b73beca8 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -734,7 +734,6 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct axxia_i2c_dev *idev = NULL;
-	struct resource *res;
 	void __iomem *base;
 	int ret = 0;
 
@@ -742,16 +741,13 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 	if (!idev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
 	idev->irq = platform_get_irq(pdev, 0);
-	if (idev->irq < 0) {
-		dev_err(&pdev->dev, "missing interrupt resource\n");
+	if (idev->irq < 0)
 		return idev->irq;
-	}
 
 	idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c");
 	if (IS_ERR(idev->i2c_clk)) {
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 44be0926b566..8a3c98866fb7 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -79,6 +79,7 @@
 #define M_CMD_STATUS_RX_FIFO_FULL    0x6
 #define M_CMD_PROTOCOL_SHIFT         9
 #define M_CMD_PROTOCOL_MASK          0xf
+#define M_CMD_PROTOCOL_QUICK         0x0
 #define M_CMD_PROTOCOL_BLK_WR        0x7
 #define M_CMD_PROTOCOL_BLK_RD        0x8
 #define M_CMD_PROTOCOL_PROCESS       0xa
@@ -360,6 +361,9 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
 			value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
 			i2c_slave_event(iproc_i2c->slave,
 					I2C_SLAVE_WRITE_RECEIVED, &value);
+			if (rx_status == I2C_SLAVE_RX_END)
+				i2c_slave_event(iproc_i2c->slave,
+						I2C_SLAVE_STOP, &value);
 		}
 	} else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
 		/* Master read other than start */
@@ -765,7 +769,11 @@ static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c,
 	 * number of bytes to read
 	 */
 	val = BIT(M_CMD_START_BUSY_SHIFT);
-	if (msg->flags & I2C_M_RD) {
+
+	if (msg->len == 0) {
+		/* SMBUS QUICK Command (Read/Write) */
+		val |= (M_CMD_PROTOCOL_QUICK << M_CMD_PROTOCOL_SHIFT);
+	} else if (msg->flags & I2C_M_RD) {
 		u32 protocol;
 
 		iproc_i2c->rx_bytes = 0;
@@ -827,8 +835,7 @@ static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
 {
 	u32 val;
 
-	/* We do not support the SMBUS Quick command */
-	val = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+	val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 
 	if (adap->algo->reg_slave)
 		val |= I2C_FUNC_SLAVE;
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 572aebbb254e..ed5e1275ae46 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -750,7 +750,6 @@ static int bcm_kona_i2c_probe(struct platform_device *pdev)
 	int rc = 0;
 	struct bcm_kona_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *iomem;
 
 	/* Allocate memory for private data structure */
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
@@ -762,8 +761,7 @@ static int bcm_kona_i2c_probe(struct platform_device *pdev)
 	init_completion(&dev->done);
 
 	/* Map hardware registers */
-	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dev->base = devm_ioremap_resource(dev->device, iomem);
+	dev->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(dev->base))
 		return -ENOMEM;
 
@@ -823,8 +821,7 @@ static int bcm_kona_i2c_probe(struct platform_device *pdev)
 	/* Get the interrupt number */
 	dev->irq = platform_get_irq(pdev, 0);
 	if (dev->irq < 0) {
-		dev_err(dev->device, "no irq resource\n");
-		rc = -ENODEV;
+		rc = dev->irq;
 		goto probe_disable_clk;
 	}
 
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 169a2836922d..d4e0a0f6732a 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -647,20 +647,22 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
 		int_name = NULL;
 
 	/* Get the interrupt number */
-	dev->irq = platform_get_irq(pdev, 0);
+	dev->irq = platform_get_irq_optional(pdev, 0);
 
 	/* disable the bsc interrupt line */
 	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
 
 	/* register the ISR handler */
-	rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr,
-			      IRQF_SHARED,
-			      int_name ? int_name : pdev->name,
-			      dev);
-
-	if (rc) {
-		dev_dbg(dev->device, "falling back to polling mode");
-		dev->irq = -1;
+	if (dev->irq >= 0) {
+		rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr,
+				      IRQF_SHARED,
+				      int_name ? int_name : pdev->name,
+				      dev);
+
+		if (rc) {
+			dev_dbg(dev->device, "falling back to polling mode");
+			dev->irq = -1;
+		}
 	}
 
 	if (of_property_read_u32(dev->device->of_node,
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 89d58f7d2a25..4b72398af505 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -23,6 +23,7 @@
 #define CDNS_I2C_ISR_OFFSET		0x10 /* IRQ Status Register, RW */
 #define CDNS_I2C_XFER_SIZE_OFFSET	0x14 /* Transfer Size Register, RW */
 #define CDNS_I2C_TIME_OUT_OFFSET	0x1C /* Time Out Register, RW */
+#define CDNS_I2C_IMR_OFFSET		0x20 /* IRQ Mask Register, RO */
 #define CDNS_I2C_IER_OFFSET		0x24 /* IRQ Enable Register, WO */
 #define CDNS_I2C_IDR_OFFSET		0x28 /* IRQ Disable Register, WO */
 
@@ -40,9 +41,17 @@
 #define CDNS_I2C_CR_DIVB_SHIFT		8
 #define CDNS_I2C_CR_DIVB_MASK		(0x3f << CDNS_I2C_CR_DIVB_SHIFT)
 
+#define CDNS_I2C_CR_MASTER_EN_MASK	(CDNS_I2C_CR_NEA | \
+					 CDNS_I2C_CR_ACK_EN | \
+					 CDNS_I2C_CR_MS)
+
+#define CDNS_I2C_CR_SLAVE_EN_MASK	~CDNS_I2C_CR_MASTER_EN_MASK
+
 /* Status Register Bit mask definitions */
 #define CDNS_I2C_SR_BA		BIT(8)
+#define CDNS_I2C_SR_TXDV	BIT(6)
 #define CDNS_I2C_SR_RXDV	BIT(5)
+#define CDNS_I2C_SR_RXRW	BIT(3)
 
 /*
  * I2C Address Register Bit mask definitions
@@ -91,6 +100,14 @@
 					 CDNS_I2C_IXR_DATA | \
 					 CDNS_I2C_IXR_COMP)
 
+#define CDNS_I2C_IXR_SLAVE_INTR_MASK	(CDNS_I2C_IXR_RX_UNF | \
+					 CDNS_I2C_IXR_TX_OVF | \
+					 CDNS_I2C_IXR_RX_OVF | \
+					 CDNS_I2C_IXR_TO | \
+					 CDNS_I2C_IXR_NACK | \
+					 CDNS_I2C_IXR_DATA | \
+					 CDNS_I2C_IXR_COMP)
+
 #define CDNS_I2C_TIMEOUT		msecs_to_jiffies(1000)
 /* timeout for pm runtime autosuspend */
 #define CNDS_I2C_PM_TIMEOUT		1000	/* ms */
@@ -114,6 +131,32 @@
 #define cdns_i2c_readreg(offset)       readl_relaxed(id->membase + offset)
 #define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+/**
+ * enum cdns_i2c_mode - I2C Controller current operating mode
+ *
+ * @CDNS_I2C_MODE_SLAVE:       I2C controller operating in slave mode
+ * @CDNS_I2C_MODE_MASTER:      I2C Controller operating in master mode
+ */
+enum cdns_i2c_mode {
+	CDNS_I2C_MODE_SLAVE,
+	CDNS_I2C_MODE_MASTER,
+};
+
+/**
+ * enum cdns_i2c_slave_mode - Slave state when I2C is operating in slave mode
+ *
+ * @CDNS_I2C_SLAVE_STATE_IDLE: I2C slave idle
+ * @CDNS_I2C_SLAVE_STATE_SEND: I2C slave sending data to master
+ * @CDNS_I2C_SLAVE_STATE_RECV: I2C slave receiving data from master
+ */
+enum cdns_i2c_slave_state {
+	CDNS_I2C_SLAVE_STATE_IDLE,
+	CDNS_I2C_SLAVE_STATE_SEND,
+	CDNS_I2C_SLAVE_STATE_RECV,
+};
+#endif
+
 /**
  * struct cdns_i2c - I2C device private data structure
  *
@@ -135,6 +178,10 @@
  * @clk:		Pointer to struct clk
  * @clk_rate_change_nb:	Notifier block for clock rate changes
  * @quirks:		flag for broken hold bit usage in r1p10
+ * @ctrl_reg_diva_divb: value of fields DIV_A and DIV_B from CR register
+ * @slave:		Registered slave instance.
+ * @dev_mode:		I2C operating role(master/slave).
+ * @slave_state:	I2C Slave state(idle/read/write).
  */
 struct cdns_i2c {
 	struct device		*dev;
@@ -155,6 +202,12 @@ struct cdns_i2c {
 	struct clk *clk;
 	struct notifier_block clk_rate_change_nb;
 	u32 quirks;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	u16 ctrl_reg_diva_divb;
+	struct i2c_client *slave;
+	enum cdns_i2c_mode dev_mode;
+	enum cdns_i2c_slave_state slave_state;
+#endif
 };
 
 struct cdns_platform_data {
@@ -183,17 +236,155 @@ static inline bool cdns_is_holdquirk(struct cdns_i2c *id, bool hold_wrkaround)
 		(id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1));
 }
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static void cdns_i2c_set_mode(enum cdns_i2c_mode mode, struct cdns_i2c *id)
+{
+	/* Disable all interrupts */
+	cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK, CDNS_I2C_IDR_OFFSET);
+
+	/* Clear FIFO and transfer size */
+	cdns_i2c_writereg(CDNS_I2C_CR_CLR_FIFO, CDNS_I2C_CR_OFFSET);
+
+	/* Update device mode and state */
+	id->dev_mode = mode;
+	id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+
+	switch (mode) {
+	case CDNS_I2C_MODE_MASTER:
+		/* Enable i2c master */
+		cdns_i2c_writereg(id->ctrl_reg_diva_divb |
+				  CDNS_I2C_CR_MASTER_EN_MASK,
+				  CDNS_I2C_CR_OFFSET);
+		/*
+		 * This delay is needed to give the IP some time to switch to
+		 * the master mode. With lower values(like 110 us) i2cdetect
+		 * will not detect any slave and without this delay, the IP will
+		 * trigger a timeout interrupt.
+		 */
+		usleep_range(115, 125);
+		break;
+	case CDNS_I2C_MODE_SLAVE:
+		/* Enable i2c slave */
+		cdns_i2c_writereg(id->ctrl_reg_diva_divb &
+				  CDNS_I2C_CR_SLAVE_EN_MASK,
+				  CDNS_I2C_CR_OFFSET);
+
+		/* Setting slave address */
+		cdns_i2c_writereg(id->slave->addr & CDNS_I2C_ADDR_MASK,
+				  CDNS_I2C_ADDR_OFFSET);
+
+		/* Enable slave send/receive interrupts */
+		cdns_i2c_writereg(CDNS_I2C_IXR_SLAVE_INTR_MASK,
+				  CDNS_I2C_IER_OFFSET);
+		break;
+	}
+}
+
+static void cdns_i2c_slave_rcv_data(struct cdns_i2c *id)
+{
+	u8 bytes;
+	unsigned char data;
+
+	/* Prepare backend for data reception */
+	if (id->slave_state == CDNS_I2C_SLAVE_STATE_IDLE) {
+		id->slave_state = CDNS_I2C_SLAVE_STATE_RECV;
+		i2c_slave_event(id->slave, I2C_SLAVE_WRITE_REQUESTED, NULL);
+	}
+
+	/* Fetch number of bytes to receive */
+	bytes = cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+
+	/* Read data and send to backend */
+	while (bytes--) {
+		data = cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+		i2c_slave_event(id->slave, I2C_SLAVE_WRITE_RECEIVED, &data);
+	}
+}
+
+static void cdns_i2c_slave_send_data(struct cdns_i2c *id)
+{
+	u8 data;
+
+	/* Prepare backend for data transmission */
+	if (id->slave_state == CDNS_I2C_SLAVE_STATE_IDLE) {
+		id->slave_state = CDNS_I2C_SLAVE_STATE_SEND;
+		i2c_slave_event(id->slave, I2C_SLAVE_READ_REQUESTED, &data);
+	} else {
+		i2c_slave_event(id->slave, I2C_SLAVE_READ_PROCESSED, &data);
+	}
+
+	/* Send data over bus */
+	cdns_i2c_writereg(data, CDNS_I2C_DATA_OFFSET);
+}
+
 /**
- * cdns_i2c_isr - Interrupt handler for the I2C device
- * @irq:	irq number for the I2C device
- * @ptr:	void pointer to cdns_i2c structure
+ * cdns_i2c_slave_isr - Interrupt handler for the I2C device in slave role
+ * @ptr:       Pointer to I2C device private data
+ *
+ * This function handles the data interrupt and transfer complete interrupt of
+ * the I2C device in slave role.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_slave_isr(void *ptr)
+{
+	struct cdns_i2c *id = ptr;
+	unsigned int isr_status, i2c_status;
+
+	/* Fetch the interrupt status */
+	isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+	cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+	/* Ignore masked interrupts */
+	isr_status &= ~cdns_i2c_readreg(CDNS_I2C_IMR_OFFSET);
+
+	/* Fetch transfer mode (send/receive) */
+	i2c_status = cdns_i2c_readreg(CDNS_I2C_SR_OFFSET);
+
+	/* Handle data send/receive */
+	if (i2c_status & CDNS_I2C_SR_RXRW) {
+		/* Send data to master */
+		if (isr_status & CDNS_I2C_IXR_DATA)
+			cdns_i2c_slave_send_data(id);
+
+		if (isr_status & CDNS_I2C_IXR_COMP) {
+			id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+			i2c_slave_event(id->slave, I2C_SLAVE_STOP, NULL);
+		}
+	} else {
+		/* Receive data from master */
+		if (isr_status & CDNS_I2C_IXR_DATA)
+			cdns_i2c_slave_rcv_data(id);
+
+		if (isr_status & CDNS_I2C_IXR_COMP) {
+			cdns_i2c_slave_rcv_data(id);
+			id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+			i2c_slave_event(id->slave, I2C_SLAVE_STOP, NULL);
+		}
+	}
+
+	/* Master indicated xfer stop or fifo underflow/overflow */
+	if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_RX_OVF |
+			  CDNS_I2C_IXR_RX_UNF | CDNS_I2C_IXR_TX_OVF)) {
+		id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+		i2c_slave_event(id->slave, I2C_SLAVE_STOP, NULL);
+		cdns_i2c_writereg(CDNS_I2C_CR_CLR_FIFO, CDNS_I2C_CR_OFFSET);
+	}
+
+	return IRQ_HANDLED;
+}
+#endif
+
+/**
+ * cdns_i2c_master_isr - Interrupt handler for the I2C device in master role
+ * @ptr:       Pointer to I2C device private data
  *
  * This function handles the data interrupt, transfer complete interrupt and
- * the error interrupts of the I2C device.
+ * the error interrupts of the I2C device in master role.
  *
  * Return: IRQ_HANDLED always
  */
-static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
+static irqreturn_t cdns_i2c_master_isr(void *ptr)
 {
 	unsigned int isr_status, avail_bytes, updatetx;
 	unsigned int bytes_to_send;
@@ -357,6 +548,27 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
 	return status;
 }
 
+/**
+ * cdns_i2c_isr - Interrupt handler for the I2C device
+ * @irq:	irq number for the I2C device
+ * @ptr:	void pointer to cdns_i2c structure
+ *
+ * This function passes the control to slave/master based on current role of
+ * i2c controller.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
+{
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	struct cdns_i2c *id = ptr;
+
+	if (id->dev_mode == CDNS_I2C_MODE_SLAVE)
+		return cdns_i2c_slave_isr(ptr);
+#endif
+	return cdns_i2c_master_isr(ptr);
+}
+
 /**
  * cdns_i2c_mrecv - Prepare and start a master receive operation
  * @id:		pointer to the i2c device structure
@@ -577,10 +789,28 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	u32 reg;
 	struct cdns_i2c *id = adap->algo_data;
 	bool hold_quirk;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	bool change_role = false;
+#endif
 
 	ret = pm_runtime_get_sync(id->dev);
 	if (ret < 0)
 		return ret;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* Check i2c operating mode and switch if possible */
+	if (id->dev_mode == CDNS_I2C_MODE_SLAVE) {
+		if (id->slave_state != CDNS_I2C_SLAVE_STATE_IDLE)
+			return -EAGAIN;
+
+		/* Set mode to master */
+		cdns_i2c_set_mode(CDNS_I2C_MODE_MASTER, id);
+
+		/* Mark flag to change role once xfer is completed */
+		change_role = true;
+	}
+#endif
+
 	/* Check if the bus is free */
 	if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA) {
 		ret = -EAGAIN;
@@ -639,7 +869,15 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	}
 
 	ret = num;
+
 out:
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* Switch i2c mode to slave */
+	if (change_role)
+		cdns_i2c_set_mode(CDNS_I2C_MODE_SLAVE, id);
+#endif
+
 	pm_runtime_mark_last_busy(id->dev);
 	pm_runtime_put_autosuspend(id->dev);
 	return ret;
@@ -653,14 +891,67 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
  */
 static u32 cdns_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
-		(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
-		I2C_FUNC_SMBUS_BLOCK_DATA;
+	u32 func = I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+			(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+			I2C_FUNC_SMBUS_BLOCK_DATA;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	func |= I2C_FUNC_SLAVE;
+#endif
+
+	return func;
 }
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static int cdns_reg_slave(struct i2c_client *slave)
+{
+	int ret;
+	struct cdns_i2c *id = container_of(slave->adapter, struct cdns_i2c,
+									adap);
+
+	if (id->slave)
+		return -EBUSY;
+
+	if (slave->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+
+	ret = pm_runtime_get_sync(id->dev);
+	if (ret < 0)
+		return ret;
+
+	/* Store slave information */
+	id->slave = slave;
+
+	/* Enable I2C slave */
+	cdns_i2c_set_mode(CDNS_I2C_MODE_SLAVE, id);
+
+	return 0;
+}
+
+static int cdns_unreg_slave(struct i2c_client *slave)
+{
+	struct cdns_i2c *id = container_of(slave->adapter, struct cdns_i2c,
+									adap);
+
+	pm_runtime_put(id->dev);
+
+	/* Remove slave information */
+	id->slave = NULL;
+
+	/* Enable I2C master */
+	cdns_i2c_set_mode(CDNS_I2C_MODE_MASTER, id);
+
+	return 0;
+}
+#endif
+
 static const struct i2c_algorithm cdns_i2c_algo = {
 	.master_xfer	= cdns_i2c_master_xfer,
 	.functionality	= cdns_i2c_func,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	.reg_slave	= cdns_reg_slave,
+	.unreg_slave	= cdns_unreg_slave,
+#endif
 };
 
 /**
@@ -755,7 +1046,10 @@ static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
 	ctrl_reg |= ((div_a << CDNS_I2C_CR_DIVA_SHIFT) |
 			(div_b << CDNS_I2C_CR_DIVB_SHIFT));
 	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
-
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	id->ctrl_reg_diva_divb = ctrl_reg & (CDNS_I2C_CR_DIVA_MASK |
+				 CDNS_I2C_CR_DIVB_MASK);
+#endif
 	return 0;
 }
 
@@ -906,8 +1200,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 		id->quirks = data->quirks;
 	}
 
-	r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	id->membase = devm_ioremap_resource(&pdev->dev, r_mem);
+	id->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &r_mem);
 	if (IS_ERR(id->membase))
 		return PTR_ERR(id->membase);
 
@@ -949,8 +1242,12 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 	if (ret || (id->i2c_clk > I2C_MAX_FAST_MODE_FREQ))
 		id->i2c_clk = I2C_MAX_STANDARD_MODE_FREQ;
 
-	cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
-			  CDNS_I2C_CR_OFFSET);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* Set initial mode to master */
+	id->dev_mode = CDNS_I2C_MODE_MASTER;
+	id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+#endif
+	cdns_i2c_writereg(CDNS_I2C_CR_MASTER_EN_MASK, CDNS_I2C_CR_OFFSET);
 
 	ret = cdns_i2c_setclk(id->input_clk, id);
 	if (ret) {
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index 35e55feda763..f80d79e973cd 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -314,10 +314,8 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	int ret, reg, irq;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Error missing irq resource\n");
-		return -EINVAL;
-	}
+	if (irq < 0)
+		return irq;
 
 	adap = devm_kzalloc(&pdev->dev, sizeof(*adap), GFP_KERNEL);
 	if (!adap)
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index e3ceb256a380..232a7679b69b 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -761,7 +761,6 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 {
 	struct davinci_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *mem;
 	struct i2c_bus_recovery_info *rinfo;
 	int r, irq;
 
@@ -814,8 +813,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dev->base = devm_ioremap_resource(&pdev->dev, mem);
+	dev->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(dev->base)) {
 		return PTR_ERR(dev->base);
 	}
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 3a58eef20936..b6c17b550d31 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -76,14 +76,27 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 	 */
 	if (t->bus_freq_hz == 1000000) {
 		/*
-		 * Check are fast mode plus parameters available and use
-		 * fast mode if not.
+		 * Check are Fast Mode Plus parameters available. Calculate
+		 * SCL timing parameters for Fast Mode Plus if not set.
 		 */
 		if (dev->fp_hcnt && dev->fp_lcnt) {
 			dev->fs_hcnt = dev->fp_hcnt;
 			dev->fs_lcnt = dev->fp_lcnt;
-			fp_str = " Plus";
+		} else {
+			ic_clk = i2c_dw_clk_rate(dev);
+			dev->fs_hcnt =
+				i2c_dw_scl_hcnt(ic_clk,
+						260,	/* tHIGH = 260 ns */
+						sda_falling_time,
+						0,	/* DW default */
+						0);	/* No offset */
+			dev->fs_lcnt =
+				i2c_dw_scl_lcnt(ic_clk,
+						500,	/* tLOW = 500 ns */
+						scl_falling_time,
+						0);	/* No offset */
 		}
+		fp_str = " Plus";
 	}
 	/*
 	 * Calculate SCL timing parameters for fast mode if not set. They are
@@ -116,10 +129,22 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 			dev->master_cfg |= DW_IC_CON_SPEED_FAST;
 			dev->hs_hcnt = 0;
 			dev->hs_lcnt = 0;
-		} else if (dev->hs_hcnt && dev->hs_lcnt) {
-			dev_dbg(dev->dev, "High Speed Mode HCNT:LCNT = %d:%d\n",
-				dev->hs_hcnt, dev->hs_lcnt);
+		} else if (!dev->hs_hcnt || !dev->hs_lcnt) {
+			ic_clk = i2c_dw_clk_rate(dev);
+			dev->hs_hcnt =
+				i2c_dw_scl_hcnt(ic_clk,
+						160,	/* tHIGH = 160 ns */
+						sda_falling_time,
+						0,	/* DW default */
+						0);	/* No offset */
+			dev->hs_lcnt =
+				i2c_dw_scl_lcnt(ic_clk,
+						320,	/* tLOW = 320 ns */
+						scl_falling_time,
+						0);	/* No offset */
 		}
+		dev_dbg(dev->dev, "High Speed Mode HCNT:LCNT = %d:%d\n",
+			dev->hs_hcnt, dev->hs_lcnt);
 	}
 
 	ret = i2c_dw_set_sda_hold(dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5536673060cc..c429d664f655 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -357,12 +357,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
 		dev_pm_set_driver_flags(&pdev->dev,
 					DPM_FLAG_SMART_PREPARE |
-					DPM_FLAG_LEAVE_SUSPENDED);
+					DPM_FLAG_MAY_SKIP_RESUME);
 	} else {
 		dev_pm_set_driver_flags(&pdev->dev,
 					DPM_FLAG_SMART_PREPARE |
 					DPM_FLAG_SMART_SUSPEND |
-					DPM_FLAG_LEAVE_SUSPENDED);
+					DPM_FLAG_MAY_SKIP_RESUME);
 	}
 
 	/* The code below assumes runtime PM to be disabled. */
diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c
index 056a5c4f0833..332f00437479 100644
--- a/drivers/i2c/busses/i2c-digicolor.c
+++ b/drivers/i2c/busses/i2c-digicolor.c
@@ -290,7 +290,6 @@ static int dc_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct dc_i2c *i2c;
-	struct resource *r;
 	int ret = 0, irq;
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct dc_i2c), GFP_KERNEL);
@@ -311,8 +310,7 @@ static int dc_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(i2c->clk))
 		return PTR_ERR(i2c->clk);
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->regs = devm_ioremap_resource(&pdev->dev, r);
+	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs))
 		return PTR_ERR(i2c->regs);
 
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index 959d4912ec0d..1a319352e51b 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -361,15 +361,13 @@ static const struct i2c_algorithm em_i2c_algo = {
 static int em_i2c_probe(struct platform_device *pdev)
 {
 	struct em_i2c_device *priv;
-	struct resource *r;
 	int ret;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->base = devm_ioremap_resource(&pdev->dev, r);
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 527030953ba1..ba7033c9e157 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -736,7 +736,6 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct exynos5_i2c *i2c;
-	struct resource *mem;
 	int ret;
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL);
@@ -762,8 +761,7 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs)) {
 		ret = PTR_ERR(i2c->regs);
 		goto err_clk;
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 6610304b6dc6..ab15b1ec2ab3 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -388,7 +388,6 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct hix5hd2_i2c_priv *priv;
-	struct resource *mem;
 	unsigned int freq;
 	int irq, ret;
 
@@ -409,8 +408,7 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 		}
 	}
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->regs = devm_ioremap_resource(&pdev->dev, mem);
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->regs))
 		return PTR_ERR(priv->regs);
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index a9c03f5c3482..4f333889489c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1439,9 +1439,9 @@ static int i801_add_mux(struct i801_priv *priv)
 		return -ENOMEM;
 	lookup->dev_id = "i2c-mux-gpio";
 	for (i = 0; i < mux_config->n_gpios; i++) {
-		lookup->table[i].chip_label = mux_config->gpio_chip;
-		lookup->table[i].chip_hwnum = mux_config->gpios[i];
-		lookup->table[i].con_id = "mux";
+		lookup->table[i] = (struct gpiod_lookup)
+			GPIO_LOOKUP(mux_config->gpio_chip,
+				    mux_config->gpios[i], "mux", 0);
 	}
 	gpiod_add_lookup_table(lookup);
 	priv->lookup = lookup;
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 422097a31c95..98a89301ed2a 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -1330,7 +1330,6 @@ static int img_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	struct img_i2c *i2c;
-	struct resource *res;
 	int irq, ret;
 	u32 val;
 
@@ -1338,16 +1337,13 @@ static int img_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	i2c->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->base))
 		return PTR_ERR(i2c->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "can't get irq number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	i2c->sys_clk = devm_clk_get(&pdev->dev, "sys");
 	if (IS_ERR(i2c->sys_clk)) {
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 94743ba581fe..9db6ccded5e9 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -551,10 +551,8 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 		return PTR_ERR(lpi2c_imx->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "can't get irq number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	lpi2c_imx->adapter.owner	= THIS_MODULE;
 	lpi2c_imx->adapter.algo		= &lpi2c_imx_algo;
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index b426fc956938..ba831df6661e 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -763,7 +763,6 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 	int ret = 0;
 	unsigned int clk_freq = 0;
 	unsigned short tmp;
-	struct resource *r;
 	struct jz4780_i2c *i2c;
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct jz4780_i2c), GFP_KERNEL);
@@ -787,8 +786,7 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 	init_completion(&i2c->trans_waitq);
 	spin_lock_init(&i2c->lock);
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->iomem = devm_ioremap_resource(&pdev->dev, r);
+	i2c->iomem = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->iomem))
 		return PTR_ERR(i2c->iomem);
 
diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c
index 13b0c12e2dba..4e30c5267142 100644
--- a/drivers/i2c/busses/i2c-lpc2k.c
+++ b/drivers/i2c/busses/i2c-lpc2k.c
@@ -346,7 +346,6 @@ static const struct i2c_algorithm i2c_lpc2k_algorithm = {
 static int i2c_lpc2k_probe(struct platform_device *pdev)
 {
 	struct lpc2k_i2c *i2c;
-	struct resource *res;
 	u32 bus_clk_rate;
 	u32 scl_high;
 	u32 clkrate;
@@ -356,16 +355,13 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	i2c->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->base))
 		return PTR_ERR(i2c->base);
 
 	i2c->irq = platform_get_irq(pdev, 0);
-	if (i2c->irq < 0) {
-		dev_err(&pdev->dev, "can't get interrupt resource\n");
+	if (i2c->irq < 0)
 		return i2c->irq;
-	}
 
 	init_waitqueue_head(&i2c->wait);
 
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 06b3bed78421..c5dec572fc48 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -397,7 +397,6 @@ static int meson_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct meson_i2c *i2c;
-	struct resource *mem;
 	struct i2c_timings timings;
 	int irq, ret = 0;
 
@@ -422,16 +421,13 @@ static int meson_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(i2c->clk);
 	}
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs))
 		return PTR_ERR(i2c->regs);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "can't find IRQ\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, irq, meson_i2c_irq, 0, NULL, i2c);
 	if (ret < 0) {
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9b8f1d8552ea..829b8c98ae51 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -877,7 +877,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 {
 	struct mv64xxx_i2c_data		*drv_data;
 	struct mv64xxx_i2c_pdata	*pdata = dev_get_platdata(&pd->dev);
-	struct resource	*r;
 	int	rc;
 
 	if ((!pdata && !pd->dev.of_node))
@@ -888,8 +887,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 	if (!drv_data)
 		return -ENOMEM;
 
-	r = platform_get_resource(pd, IORESOURCE_MEM, 0);
-	drv_data->reg_base = devm_ioremap_resource(&pd->dev, r);
+	drv_data->reg_base = devm_platform_ioremap_resource(pd, 0);
 	if (IS_ERR(drv_data->reg_base))
 		return PTR_ERR(drv_data->reg_base);
 
diff --git a/drivers/i2c/busses/i2c-octeon-platdrv.c b/drivers/i2c/busses/i2c-octeon-platdrv.c
index 64bda83e65ac..0c227963c8d6 100644
--- a/drivers/i2c/busses/i2c-octeon-platdrv.c
+++ b/drivers/i2c/busses/i2c-octeon-platdrv.c
@@ -136,7 +136,6 @@ static int octeon_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	int irq, result = 0, hlc_irq = 0;
-	struct resource *res_mem;
 	struct octeon_i2c *i2c;
 	bool cn78xx_style;
 
@@ -167,8 +166,7 @@ static int octeon_i2c_probe(struct platform_device *pdev)
 	i2c->roff.twsi_int = 0x10;
 	i2c->roff.sw_twsi_ext = 0x18;
 
-	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->twsi_base = devm_ioremap_resource(&pdev->dev, res_mem);
+	i2c->twsi_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->twsi_base)) {
 		result = PTR_ERR(i2c->twsi_base);
 		goto out;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 71b4637c86b7..175c590b93b7 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1365,10 +1365,8 @@ omap_i2c_probe(struct platform_device *pdev)
 	u16 minor, major;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq resource?\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	omap = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL);
 	if (!omap)
diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c
index 3ab8be62c581..672f1f239bd6 100644
--- a/drivers/i2c/busses/i2c-owl.c
+++ b/drivers/i2c/busses/i2c-owl.c
@@ -396,23 +396,19 @@ static int owl_i2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct owl_i2c_dev *i2c_dev;
-	struct resource *res;
 	int ret, irq;
 
 	i2c_dev = devm_kzalloc(dev, sizeof(*i2c_dev), GFP_KERNEL);
 	if (!i2c_dev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c_dev->base = devm_ioremap_resource(dev, res);
+	i2c_dev->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c_dev->base))
 		return PTR_ERR(i2c_dev->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "failed to get IRQ number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency",
 				 &i2c_dev->bus_freq))
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 635dd697ac0b..546426a470cc 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -149,8 +149,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	i2c->reg_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(i2c->reg_base))
 		return PTR_ERR(i2c->reg_base);
 
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 30ded6422e7b..69740a4ff1db 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -977,7 +977,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	if (dev->vendor == PCI_VENDOR_ID_AMD &&
-	    dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) {
+	    (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS ||
+	     dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)) {
 		retval = piix4_setup_sb800(dev, id, 1);
 	}
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 686c06f31625..5d7207c10f1d 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -720,7 +720,6 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 
 	alg_data->irq = platform_get_irq(pdev, 0);
 	if (alg_data->irq < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ from platform resource\n");
 		ret = alg_data->irq;
 		goto out_clock;
 	}
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index d565714c1f13..81506c2dab65 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -207,18 +207,18 @@ static u32 i2c_powermac_get_addr(struct i2c_adapter *adap,
 					   struct pmac_i2c_bus *bus,
 					   struct device_node *node)
 {
-	const __be32 *prop;
-	int len;
+	u32 prop;
+	int ret;
 
 	/* First check for valid "reg" */
-	prop = of_get_property(node, "reg", &len);
-	if (prop && (len >= sizeof(int)))
-		return (be32_to_cpup(prop) & 0xff) >> 1;
+	ret = of_property_read_u32(node, "reg", &prop);
+	if (ret == 0)
+		return (prop & 0xff) >> 1;
 
 	/* Then check old-style "i2c-address" */
-	prop = of_get_property(node, "i2c-address", &len);
-	if (prop && (len >= sizeof(int)))
-		return (be32_to_cpup(prop) & 0xff) >> 1;
+	ret = of_property_read_u32(node, "i2c-address", &prop);
+	if (ret == 0)
+		return (prop & 0xff) >> 1;
 
 	/* Now handle some devices with missing "reg" properties */
 	if (of_node_name_eq(node, "cereal"))
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 466e4f681d7a..37246cbbe14c 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1267,10 +1267,8 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		return PTR_ERR(i2c->reg_base);
 
 	irq = platform_get_irq(dev, 0);
-	if (irq < 0) {
-		dev_err(&dev->dev, "no irq resource: %d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
 	/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
 	i2c->adap.nr = dev->id;
diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
new file mode 100644
index 000000000000..f13735beca58
--- /dev/null
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -0,0 +1,791 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2012-2016, The Linux Foundation. All rights reserved.
+// Copyright (c) 2017-20 Linaro Limited.
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define CCI_HW_VERSION				0x0
+#define CCI_RESET_CMD				0x004
+#define CCI_RESET_CMD_MASK			0x0f73f3f7
+#define CCI_RESET_CMD_M0_MASK			0x000003f1
+#define CCI_RESET_CMD_M1_MASK			0x0003f001
+#define CCI_QUEUE_START				0x008
+#define CCI_HALT_REQ				0x034
+#define CCI_HALT_REQ_I2C_M0_Q0Q1		BIT(0)
+#define CCI_HALT_REQ_I2C_M1_Q0Q1		BIT(1)
+
+#define CCI_I2C_Mm_SCL_CTL(m)			(0x100 + 0x100 * (m))
+#define CCI_I2C_Mm_SDA_CTL_0(m)			(0x104 + 0x100 * (m))
+#define CCI_I2C_Mm_SDA_CTL_1(m)			(0x108 + 0x100 * (m))
+#define CCI_I2C_Mm_SDA_CTL_2(m)			(0x10c + 0x100 * (m))
+#define CCI_I2C_Mm_MISC_CTL(m)			(0x110 + 0x100 * (m))
+
+#define CCI_I2C_Mm_READ_DATA(m)			(0x118 + 0x100 * (m))
+#define CCI_I2C_Mm_READ_BUF_LEVEL(m)		(0x11c + 0x100 * (m))
+#define CCI_I2C_Mm_Qn_EXEC_WORD_CNT(m, n)	(0x300 + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_CUR_WORD_CNT(m, n)	(0x304 + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_CUR_CMD(m, n)		(0x308 + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_REPORT_STATUS(m, n)	(0x30c + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_LOAD_DATA(m, n)		(0x310 + 0x200 * (m) + 0x100 * (n))
+
+#define CCI_IRQ_GLOBAL_CLEAR_CMD		0xc00
+#define CCI_IRQ_MASK_0				0xc04
+#define CCI_IRQ_MASK_0_I2C_M0_RD_DONE		BIT(0)
+#define CCI_IRQ_MASK_0_I2C_M0_Q0_REPORT		BIT(4)
+#define CCI_IRQ_MASK_0_I2C_M0_Q1_REPORT		BIT(8)
+#define CCI_IRQ_MASK_0_I2C_M1_RD_DONE		BIT(12)
+#define CCI_IRQ_MASK_0_I2C_M1_Q0_REPORT		BIT(16)
+#define CCI_IRQ_MASK_0_I2C_M1_Q1_REPORT		BIT(20)
+#define CCI_IRQ_MASK_0_RST_DONE_ACK		BIT(24)
+#define CCI_IRQ_MASK_0_I2C_M0_Q0Q1_HALT_ACK	BIT(25)
+#define CCI_IRQ_MASK_0_I2C_M1_Q0Q1_HALT_ACK	BIT(26)
+#define CCI_IRQ_MASK_0_I2C_M0_ERROR		0x18000ee6
+#define CCI_IRQ_MASK_0_I2C_M1_ERROR		0x60ee6000
+#define CCI_IRQ_CLEAR_0				0xc08
+#define CCI_IRQ_STATUS_0			0xc0c
+#define CCI_IRQ_STATUS_0_I2C_M0_RD_DONE		BIT(0)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q0_REPORT	BIT(4)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q1_REPORT	BIT(8)
+#define CCI_IRQ_STATUS_0_I2C_M1_RD_DONE		BIT(12)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q0_REPORT	BIT(16)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q1_REPORT	BIT(20)
+#define CCI_IRQ_STATUS_0_RST_DONE_ACK		BIT(24)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q0Q1_HALT_ACK	BIT(25)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q0Q1_HALT_ACK	BIT(26)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q0_NACK_ERR	BIT(27)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q1_NACK_ERR	BIT(28)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q0_NACK_ERR	BIT(29)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q1_NACK_ERR	BIT(30)
+#define CCI_IRQ_STATUS_0_I2C_M0_ERROR		0x18000ee6
+#define CCI_IRQ_STATUS_0_I2C_M1_ERROR		0x60ee6000
+
+#define CCI_TIMEOUT	(msecs_to_jiffies(100))
+#define NUM_MASTERS	2
+#define NUM_QUEUES	2
+
+/* Max number of resources + 1 for a NULL terminator */
+#define CCI_RES_MAX	6
+
+#define CCI_I2C_SET_PARAM	1
+#define CCI_I2C_REPORT		8
+#define CCI_I2C_WRITE		9
+#define CCI_I2C_READ		10
+
+#define CCI_I2C_REPORT_IRQ_EN	BIT(8)
+
+enum {
+	I2C_MODE_STANDARD,
+	I2C_MODE_FAST,
+	I2C_MODE_FAST_PLUS,
+};
+
+enum cci_i2c_queue_t {
+	QUEUE_0,
+	QUEUE_1
+};
+
+struct hw_params {
+	u16 thigh; /* HIGH period of the SCL clock in clock ticks */
+	u16 tlow; /* LOW period of the SCL clock */
+	u16 tsu_sto; /* set-up time for STOP condition */
+	u16 tsu_sta; /* set-up time for a repeated START condition */
+	u16 thd_dat; /* data hold time */
+	u16 thd_sta; /* hold time (repeated) START condition */
+	u16 tbuf; /* bus free time between a STOP and START condition */
+	u8 scl_stretch_en;
+	u16 trdhld;
+	u16 tsp; /* pulse width of spikes suppressed by the input filter */
+};
+
+struct cci;
+
+struct cci_master {
+	struct i2c_adapter adap;
+	u16 master;
+	u8 mode;
+	int status;
+	struct completion irq_complete;
+	struct cci *cci;
+};
+
+struct cci_data {
+	unsigned int num_masters;
+	struct i2c_adapter_quirks quirks;
+	u16 queue_size[NUM_QUEUES];
+	unsigned long cci_clk_rate;
+	struct hw_params params[3];
+};
+
+struct cci {
+	struct device *dev;
+	void __iomem *base;
+	unsigned int irq;
+	const struct cci_data *data;
+	struct clk_bulk_data *clocks;
+	int nclocks;
+	struct cci_master master[NUM_MASTERS];
+};
+
+static irqreturn_t cci_isr(int irq, void *dev)
+{
+	struct cci *cci = dev;
+	u32 val, reset = 0;
+	int ret = IRQ_NONE;
+
+	val = readl(cci->base + CCI_IRQ_STATUS_0);
+	writel(val, cci->base + CCI_IRQ_CLEAR_0);
+	writel(0x1, cci->base + CCI_IRQ_GLOBAL_CLEAR_CMD);
+
+	if (val & CCI_IRQ_STATUS_0_RST_DONE_ACK) {
+		complete(&cci->master[0].irq_complete);
+		if (cci->master[1].master)
+			complete(&cci->master[1].irq_complete);
+		ret = IRQ_HANDLED;
+	}
+
+	if (val & CCI_IRQ_STATUS_0_I2C_M0_RD_DONE ||
+			val & CCI_IRQ_STATUS_0_I2C_M0_Q0_REPORT ||
+			val & CCI_IRQ_STATUS_0_I2C_M0_Q1_REPORT) {
+		cci->master[0].status = 0;
+		complete(&cci->master[0].irq_complete);
+		ret = IRQ_HANDLED;
+	}
+
+	if (val & CCI_IRQ_STATUS_0_I2C_M1_RD_DONE ||
+			val & CCI_IRQ_STATUS_0_I2C_M1_Q0_REPORT ||
+			val & CCI_IRQ_STATUS_0_I2C_M1_Q1_REPORT) {
+		cci->master[1].status = 0;
+		complete(&cci->master[1].irq_complete);
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M0_Q0Q1_HALT_ACK)) {
+		reset = CCI_RESET_CMD_M0_MASK;
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M1_Q0Q1_HALT_ACK)) {
+		reset = CCI_RESET_CMD_M1_MASK;
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(reset))
+		writel(reset, cci->base + CCI_RESET_CMD);
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M0_ERROR)) {
+		if (val & CCI_IRQ_STATUS_0_I2C_M0_Q0_NACK_ERR ||
+			val & CCI_IRQ_STATUS_0_I2C_M0_Q1_NACK_ERR)
+			cci->master[0].status = -ENXIO;
+		else
+			cci->master[0].status = -EIO;
+
+		writel(CCI_HALT_REQ_I2C_M0_Q0Q1, cci->base + CCI_HALT_REQ);
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M1_ERROR)) {
+		if (val & CCI_IRQ_STATUS_0_I2C_M1_Q0_NACK_ERR ||
+			val & CCI_IRQ_STATUS_0_I2C_M1_Q1_NACK_ERR)
+			cci->master[0].status = -ENXIO;
+		else
+			cci->master[0].status = -EIO;
+
+		writel(CCI_HALT_REQ_I2C_M1_Q0Q1, cci->base + CCI_HALT_REQ);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int cci_halt(struct cci *cci, u8 master_num)
+{
+	struct cci_master *master;
+	u32 val;
+
+	if (master_num >= cci->data->num_masters) {
+		dev_err(cci->dev, "Unsupported master idx (%u)\n", master_num);
+		return -EINVAL;
+	}
+
+	val = BIT(master_num);
+	master = &cci->master[master_num];
+
+	reinit_completion(&master->irq_complete);
+	writel(val, cci->base + CCI_HALT_REQ);
+
+	if (!wait_for_completion_timeout(&master->irq_complete, CCI_TIMEOUT)) {
+		dev_err(cci->dev, "CCI halt timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cci_reset(struct cci *cci)
+{
+	/*
+	 * we reset the whole controller, here and for implicity use
+	 * master[0].xxx for waiting on it.
+	 */
+	reinit_completion(&cci->master[0].irq_complete);
+	writel(CCI_RESET_CMD_MASK, cci->base + CCI_RESET_CMD);
+
+	if (!wait_for_completion_timeout(&cci->master[0].irq_complete,
+					 CCI_TIMEOUT)) {
+		dev_err(cci->dev, "CCI reset timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cci_init(struct cci *cci)
+{
+	u32 val = CCI_IRQ_MASK_0_I2C_M0_RD_DONE |
+			CCI_IRQ_MASK_0_I2C_M0_Q0_REPORT |
+			CCI_IRQ_MASK_0_I2C_M0_Q1_REPORT |
+			CCI_IRQ_MASK_0_I2C_M1_RD_DONE |
+			CCI_IRQ_MASK_0_I2C_M1_Q0_REPORT |
+			CCI_IRQ_MASK_0_I2C_M1_Q1_REPORT |
+			CCI_IRQ_MASK_0_RST_DONE_ACK |
+			CCI_IRQ_MASK_0_I2C_M0_Q0Q1_HALT_ACK |
+			CCI_IRQ_MASK_0_I2C_M1_Q0Q1_HALT_ACK |
+			CCI_IRQ_MASK_0_I2C_M0_ERROR |
+			CCI_IRQ_MASK_0_I2C_M1_ERROR;
+	int i;
+
+	writel(val, cci->base + CCI_IRQ_MASK_0);
+
+	for (i = 0; i < cci->data->num_masters; i++) {
+		int mode = cci->master[i].mode;
+		const struct hw_params *hw;
+
+		if (!cci->master[i].cci)
+			continue;
+
+		hw = &cci->data->params[mode];
+
+		val = hw->thigh << 16 | hw->tlow;
+		writel(val, cci->base + CCI_I2C_Mm_SCL_CTL(i));
+
+		val = hw->tsu_sto << 16 | hw->tsu_sta;
+		writel(val, cci->base + CCI_I2C_Mm_SDA_CTL_0(i));
+
+		val = hw->thd_dat << 16 | hw->thd_sta;
+		writel(val, cci->base + CCI_I2C_Mm_SDA_CTL_1(i));
+
+		val = hw->tbuf;
+		writel(val, cci->base + CCI_I2C_Mm_SDA_CTL_2(i));
+
+		val = hw->scl_stretch_en << 8 | hw->trdhld << 4 | hw->tsp;
+		writel(val, cci->base + CCI_I2C_Mm_MISC_CTL(i));
+	}
+
+	return 0;
+}
+
+static int cci_run_queue(struct cci *cci, u8 master, u8 queue)
+{
+	u32 val;
+
+	val = readl(cci->base + CCI_I2C_Mm_Qn_CUR_WORD_CNT(master, queue));
+	writel(val, cci->base + CCI_I2C_Mm_Qn_EXEC_WORD_CNT(master, queue));
+
+	reinit_completion(&cci->master[master].irq_complete);
+	val = BIT(master * 2 + queue);
+	writel(val, cci->base + CCI_QUEUE_START);
+
+	if (!wait_for_completion_timeout(&cci->master[master].irq_complete,
+					 CCI_TIMEOUT)) {
+		dev_err(cci->dev, "master %d queue %d timeout\n",
+			master, queue);
+		cci_reset(cci);
+		cci_init(cci);
+		return -ETIMEDOUT;
+	}
+
+	return cci->master[master].status;
+}
+
+static int cci_validate_queue(struct cci *cci, u8 master, u8 queue)
+{
+	u32 val;
+
+	val = readl(cci->base + CCI_I2C_Mm_Qn_CUR_WORD_CNT(master, queue));
+	if (val == cci->data->queue_size[queue])
+		return -EINVAL;
+
+	if (!val)
+		return 0;
+
+	val = CCI_I2C_REPORT | CCI_I2C_REPORT_IRQ_EN;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	return cci_run_queue(cci, master, queue);
+}
+
+static int cci_i2c_read(struct cci *cci, u16 master,
+			u16 addr, u8 *buf, u16 len)
+{
+	u32 val, words_read, words_exp;
+	u8 queue = QUEUE_1;
+	int i, index = 0, ret;
+	bool first = true;
+
+	/*
+	 * Call validate queue to make sure queue is empty before starting.
+	 * This is to avoid overflow / underflow of queue.
+	 */
+	ret = cci_validate_queue(cci, master, queue);
+	if (ret < 0)
+		return ret;
+
+	val = CCI_I2C_SET_PARAM | (addr & 0x7f) << 4;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	val = CCI_I2C_READ | len << 4;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	ret = cci_run_queue(cci, master, queue);
+	if (ret < 0)
+		return ret;
+
+	words_read = readl(cci->base + CCI_I2C_Mm_READ_BUF_LEVEL(master));
+	words_exp = len / 4 + 1;
+	if (words_read != words_exp) {
+		dev_err(cci->dev, "words read = %d, words expected = %d\n",
+			words_read, words_exp);
+		return -EIO;
+	}
+
+	do {
+		val = readl(cci->base + CCI_I2C_Mm_READ_DATA(master));
+
+		for (i = 0; i < 4 && index < len; i++) {
+			if (first) {
+				/* The LS byte of this register represents the
+				 * first byte read from the slave during a read
+				 * access.
+				 */
+				first = false;
+				continue;
+			}
+			buf[index++] = (val >> (i * 8)) & 0xff;
+		}
+	} while (--words_read);
+
+	return 0;
+}
+
+static int cci_i2c_write(struct cci *cci, u16 master,
+			 u16 addr, u8 *buf, u16 len)
+{
+	u8 queue = QUEUE_0;
+	u8 load[12] = { 0 };
+	int i = 0, j, ret;
+	u32 val;
+
+	/*
+	 * Call validate queue to make sure queue is empty before starting.
+	 * This is to avoid overflow / underflow of queue.
+	 */
+	ret = cci_validate_queue(cci, master, queue);
+	if (ret < 0)
+		return ret;
+
+	val = CCI_I2C_SET_PARAM | (addr & 0x7f) << 4;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	load[i++] = CCI_I2C_WRITE | len << 4;
+
+	for (j = 0; j < len; j++)
+		load[i++] = buf[j];
+
+	for (j = 0; j < i; j += 4) {
+		val = load[j];
+		val |= load[j + 1] << 8;
+		val |= load[j + 2] << 16;
+		val |= load[j + 3] << 24;
+		writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+	}
+
+	val = CCI_I2C_REPORT | CCI_I2C_REPORT_IRQ_EN;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	return cci_run_queue(cci, master, queue);
+}
+
+static int cci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct cci_master *cci_master = i2c_get_adapdata(adap);
+	struct cci *cci = cci_master->cci;
+	int i, ret;
+
+	ret = pm_runtime_get_sync(cci->dev);
+	if (ret < 0)
+		goto err;
+
+	for (i = 0; i < num; i++) {
+		if (msgs[i].flags & I2C_M_RD)
+			ret = cci_i2c_read(cci, cci_master->master,
+					   msgs[i].addr, msgs[i].buf,
+					   msgs[i].len);
+		else
+			ret = cci_i2c_write(cci, cci_master->master,
+					    msgs[i].addr, msgs[i].buf,
+					    msgs[i].len);
+
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+err:
+	pm_runtime_mark_last_busy(cci->dev);
+	pm_runtime_put_autosuspend(cci->dev);
+
+	return ret;
+}
+
+static u32 cci_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm cci_algo = {
+	.master_xfer	= cci_xfer,
+	.functionality	= cci_func,
+};
+
+static int cci_enable_clocks(struct cci *cci)
+{
+	return clk_bulk_prepare_enable(cci->nclocks, cci->clocks);
+}
+
+static void cci_disable_clocks(struct cci *cci)
+{
+	clk_bulk_disable_unprepare(cci->nclocks, cci->clocks);
+}
+
+static int __maybe_unused cci_suspend_runtime(struct device *dev)
+{
+	struct cci *cci = dev_get_drvdata(dev);
+
+	cci_disable_clocks(cci);
+	return 0;
+}
+
+static int __maybe_unused cci_resume_runtime(struct device *dev)
+{
+	struct cci *cci = dev_get_drvdata(dev);
+	int ret;
+
+	ret = cci_enable_clocks(cci);
+	if (ret)
+		return ret;
+
+	cci_init(cci);
+	return 0;
+}
+
+static int __maybe_unused cci_suspend(struct device *dev)
+{
+	if (!pm_runtime_suspended(dev))
+		return cci_suspend_runtime(dev);
+
+	return 0;
+}
+
+static int __maybe_unused cci_resume(struct device *dev)
+{
+	cci_resume_runtime(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_request_autosuspend(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops qcom_cci_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(cci_suspend, cci_resume)
+	SET_RUNTIME_PM_OPS(cci_suspend_runtime, cci_resume_runtime, NULL)
+};
+
+static int cci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned long cci_clk_rate = 0;
+	struct device_node *child;
+	struct resource *r;
+	struct cci *cci;
+	int ret, i;
+	u32 val;
+
+	cci = devm_kzalloc(dev, sizeof(*cci), GFP_KERNEL);
+	if (!cci)
+		return -ENOMEM;
+
+	cci->dev = dev;
+	platform_set_drvdata(pdev, cci);
+	cci->data = device_get_match_data(dev);
+	if (!cci->data)
+		return -ENOENT;
+
+	for_each_available_child_of_node(dev->of_node, child) {
+		u32 idx;
+
+		ret = of_property_read_u32(child, "reg", &idx);
+		if (ret) {
+			dev_err(dev, "%pOF invalid 'reg' property", child);
+			continue;
+		}
+
+		if (idx >= cci->data->num_masters) {
+			dev_err(dev, "%pOF invalid 'reg' value: %u (max is %u)",
+				child, idx, cci->data->num_masters - 1);
+			continue;
+		}
+
+		cci->master[idx].adap.quirks = &cci->data->quirks;
+		cci->master[idx].adap.algo = &cci_algo;
+		cci->master[idx].adap.dev.parent = dev;
+		cci->master[idx].adap.dev.of_node = child;
+		cci->master[idx].master = idx;
+		cci->master[idx].cci = cci;
+
+		i2c_set_adapdata(&cci->master[idx].adap, &cci->master[idx]);
+		snprintf(cci->master[idx].adap.name,
+			 sizeof(cci->master[idx].adap.name), "Qualcomm-CCI");
+
+		cci->master[idx].mode = I2C_MODE_STANDARD;
+		ret = of_property_read_u32(child, "clock-frequency", &val);
+		if (!ret) {
+			if (val == 400000)
+				cci->master[idx].mode = I2C_MODE_FAST;
+			else if (val == 1000000)
+				cci->master[idx].mode = I2C_MODE_FAST_PLUS;
+		}
+
+		init_completion(&cci->master[idx].irq_complete);
+	}
+
+	/* Memory */
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cci->base = devm_ioremap_resource(dev, r);
+	if (IS_ERR(cci->base))
+		return PTR_ERR(cci->base);
+
+	/* Clocks */
+
+	ret = devm_clk_bulk_get_all(dev, &cci->clocks);
+	if (ret < 1) {
+		dev_err(dev, "failed to get clocks %d\n", ret);
+		return ret;
+	}
+	cci->nclocks = ret;
+
+	/* Retrieve CCI clock rate */
+	for (i = 0; i < cci->nclocks; i++) {
+		if (!strcmp(cci->clocks[i].id, "cci")) {
+			cci_clk_rate = clk_get_rate(cci->clocks[i].clk);
+			break;
+		}
+	}
+
+	if (cci_clk_rate != cci->data->cci_clk_rate) {
+		/* cci clock set by the bootloader or via assigned clock rate
+		 * in DT.
+		 */
+		dev_warn(dev, "Found %lu cci clk rate while %lu was expected\n",
+			 cci_clk_rate, cci->data->cci_clk_rate);
+	}
+
+	ret = cci_enable_clocks(cci);
+	if (ret < 0)
+		return ret;
+
+	/* Interrupt */
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto disable_clocks;
+	cci->irq = ret;
+
+	ret = devm_request_irq(dev, cci->irq, cci_isr, 0, dev_name(dev), cci);
+	if (ret < 0) {
+		dev_err(dev, "request_irq failed, ret: %d\n", ret);
+		goto disable_clocks;
+	}
+
+	val = readl(cci->base + CCI_HW_VERSION);
+	dev_dbg(dev, "CCI HW version = 0x%08x", val);
+
+	ret = cci_reset(cci);
+	if (ret < 0)
+		goto error;
+
+	ret = cci_init(cci);
+	if (ret < 0)
+		goto error;
+
+	for (i = 0; i < cci->data->num_masters; i++) {
+		if (!cci->master[i].cci)
+			continue;
+
+		ret = i2c_add_adapter(&cci->master[i].adap);
+		if (ret < 0)
+			goto error_i2c;
+	}
+
+	pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+error_i2c:
+	for (; i >= 0; i--) {
+		if (cci->master[i].cci)
+			i2c_del_adapter(&cci->master[i].adap);
+	}
+error:
+	disable_irq(cci->irq);
+disable_clocks:
+	cci_disable_clocks(cci);
+
+	return ret;
+}
+
+static int cci_remove(struct platform_device *pdev)
+{
+	struct cci *cci = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < cci->data->num_masters; i++) {
+		if (cci->master[i].cci)
+			i2c_del_adapter(&cci->master[i].adap);
+		cci_halt(cci, i);
+	}
+
+	disable_irq(cci->irq);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	return 0;
+}
+
+static const struct cci_data cci_v1_data = {
+	.num_masters = 1,
+	.queue_size = { 64, 16 },
+	.quirks = {
+		.max_write_len = 10,
+		.max_read_len = 12,
+	},
+	.cci_clk_rate =  19200000,
+	.params[I2C_MODE_STANDARD] = {
+		.thigh = 78,
+		.tlow = 114,
+		.tsu_sto = 28,
+		.tsu_sta = 28,
+		.thd_dat = 10,
+		.thd_sta = 77,
+		.tbuf = 118,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 1
+	},
+	.params[I2C_MODE_FAST] = {
+		.thigh = 20,
+		.tlow = 28,
+		.tsu_sto = 21,
+		.tsu_sta = 21,
+		.thd_dat = 13,
+		.thd_sta = 18,
+		.tbuf = 32,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+};
+
+static const struct cci_data cci_v2_data = {
+	.num_masters = 2,
+	.queue_size = { 64, 16 },
+	.quirks = {
+		.max_write_len = 11,
+		.max_read_len = 12,
+	},
+	.cci_clk_rate =  37500000,
+	.params[I2C_MODE_STANDARD] = {
+		.thigh = 201,
+		.tlow = 174,
+		.tsu_sto = 204,
+		.tsu_sta = 231,
+		.thd_dat = 22,
+		.thd_sta = 162,
+		.tbuf = 227,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+	.params[I2C_MODE_FAST] = {
+		.thigh = 38,
+		.tlow = 56,
+		.tsu_sto = 40,
+		.tsu_sta = 40,
+		.thd_dat = 22,
+		.thd_sta = 35,
+		.tbuf = 62,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+	.params[I2C_MODE_FAST_PLUS] = {
+		.thigh = 16,
+		.tlow = 22,
+		.tsu_sto = 17,
+		.tsu_sta = 18,
+		.thd_dat = 16,
+		.thd_sta = 15,
+		.tbuf = 24,
+		.scl_stretch_en = 0,
+		.trdhld = 3,
+		.tsp = 3
+	},
+};
+
+static const struct of_device_id cci_dt_match[] = {
+	{ .compatible = "qcom,msm8916-cci", .data = &cci_v1_data},
+	{ .compatible = "qcom,msm8996-cci", .data = &cci_v2_data},
+	{ .compatible = "qcom,sdm845-cci", .data = &cci_v2_data},
+	{}
+};
+MODULE_DEVICE_TABLE(of, cci_dt_match);
+
+static struct platform_driver qcom_cci_driver = {
+	.probe  = cci_probe,
+	.remove = cci_remove,
+	.driver = {
+		.name = "i2c-qcom-cci",
+		.of_match_table = cci_dt_match,
+		.pm = &qcom_cci_pm,
+	},
+};
+
+module_platform_driver(qcom_cci_driver);
+
+MODULE_DESCRIPTION("Qualcomm Camera Control Interface driver");
+MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>");
+MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 748872a9b0fc..fbc04b60cfd1 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -956,10 +956,8 @@ static void qup_i2c_conf_v1(struct qup_i2c_dev *qup)
 	u32 qup_config = I2C_MINI_CORE | I2C_N_VAL;
 	u32 io_mode = QUP_REPACK_EN;
 
-	blk->is_tx_blk_mode =
-		blk->total_tx_len > qup->out_fifo_sz ? true : false;
-	blk->is_rx_blk_mode =
-		blk->total_rx_len > qup->in_fifo_sz ? true : false;
+	blk->is_tx_blk_mode = blk->total_tx_len > qup->out_fifo_sz;
+	blk->is_rx_blk_mode = blk->total_rx_len > qup->in_fifo_sz;
 
 	if (blk->is_tx_blk_mode) {
 		io_mode |= QUP_OUTPUT_BLK_MODE;
@@ -1528,9 +1526,9 @@ qup_i2c_determine_mode_v2(struct qup_i2c_dev *qup,
 		qup->use_dma = true;
 	} else {
 		qup->blk.is_tx_blk_mode = max_tx_len > qup->out_fifo_sz -
-			QUP_MAX_TAGS_LEN ? true : false;
+			QUP_MAX_TAGS_LEN;
 		qup->blk.is_rx_blk_mode = max_rx_len > qup->in_fifo_sz -
-			READ_RX_TAGS_LEN ? true : false;
+			READ_RX_TAGS_LEN;
 	}
 
 	return 0;
@@ -1660,7 +1658,6 @@ static int qup_i2c_probe(struct platform_device *pdev)
 	static const int blk_sizes[] = {4, 16, 32};
 	struct qup_i2c_dev *qup;
 	unsigned long one_bit_t;
-	struct resource *res;
 	u32 io_mode, hw_ver, size;
 	int ret, fs_div, hs_div;
 	u32 src_clk_freq = DEFAULT_SRC_CLK;
@@ -1757,16 +1754,13 @@ static int qup_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	qup->base = devm_ioremap_resource(qup->dev, res);
+	qup->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(qup->base))
 		return PTR_ERR(qup->base);
 
 	qup->irq = platform_get_irq(pdev, 0);
-	if (qup->irq < 0) {
-		dev_err(qup->dev, "No IRQ defined\n");
+	if (qup->irq < 0)
 		return qup->irq;
-	}
 
 	if (has_acpi_companion(qup->dev)) {
 		ret = device_property_read_u32(qup->dev,
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 3b5397aa4ca6..a45c4bf1ec01 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -938,9 +938,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->clk);
 	}
 
-	priv->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	priv->io = devm_ioremap_resource(dev, priv->res);
+	priv->io = devm_platform_get_and_ioremap_resource(pdev, 0, &priv->res);
 	if (IS_ERR(priv->io))
 		return PTR_ERR(priv->io);
 
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 73272d4296bb..bc698240c4aa 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1193,7 +1193,6 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *match;
 	struct rk3x_i2c *i2c;
-	struct resource *mem;
 	int ret = 0;
 	int bus_nr;
 	u32 value;
@@ -1223,8 +1222,7 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 	spin_lock_init(&i2c->lock);
 	init_waitqueue_head(&i2c->wait);
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs))
 		return PTR_ERR(i2c->regs);
 
@@ -1262,10 +1260,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 
 	/* IRQ setup */
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "cannot find rk3x IRQ\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, irq, rk3x_i2c_irq,
 			       0, dev_name(&pdev->dev), i2c);
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index a459e00c6851..d7f72ec331e8 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -271,7 +271,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 {
 	struct sirfsoc_i2c *siic;
 	struct i2c_adapter *adap;
-	struct resource *mem_res;
 	struct clk *clk;
 	int bitrate;
 	int ctrl_speed;
@@ -309,8 +308,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 	adap = &siic->adapter;
 	adap->class = I2C_CLASS_DEPRECATED;
 
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	siic->base = devm_ioremap_resource(&pdev->dev, mem_res);
+	siic->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(siic->base)) {
 		err = PTR_ERR(siic->base);
 		goto out;
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 123a42bfe3b1..19cda6742423 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -492,10 +492,8 @@ static int sprd_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(i2c_dev->base);
 
 	i2c_dev->irq = platform_get_irq(pdev, 0);
-	if (i2c_dev->irq < 0) {
-		dev_err(&pdev->dev, "failed to get irq resource\n");
+	if (i2c_dev->irq < 0)
 		return i2c_dev->irq;
-	}
 
 	i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
 	init_completion(&i2c_dev->complete);
diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
index 1da347e6a358..3f69a3bb6119 100644
--- a/drivers/i2c/busses/i2c-stm32.c
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -25,8 +25,9 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	/* Request and configure I2C TX dma channel */
 	dma->chan_tx = dma_request_chan(dev, "tx");
 	if (IS_ERR(dma->chan_tx)) {
-		dev_dbg(dev, "can't request DMA tx channel\n");
 		ret = PTR_ERR(dma->chan_tx);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "can't request DMA tx channel\n");
 		goto fail_al;
 	}
 
@@ -44,8 +45,10 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	/* Request and configure I2C RX dma channel */
 	dma->chan_rx = dma_request_chan(dev, "rx");
 	if (IS_ERR(dma->chan_rx)) {
-		dev_err(dev, "can't request DMA rx channel\n");
 		ret = PTR_ERR(dma->chan_rx);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "can't request DMA rx channel\n");
+
 		goto fail_tx;
 	}
 
@@ -73,7 +76,8 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	dma_release_channel(dma->chan_tx);
 fail_al:
 	devm_kfree(dev, dma);
-	dev_info(dev, "can't use DMA\n");
+	if (ret != -EPROBE_DEFER)
+		dev_info(dev, "can't use DMA\n");
 
 	return ERR_PTR(ret);
 }
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index d6a69dfcac3f..48e269284369 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -797,8 +797,10 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
-		dev_err(&pdev->dev, "Error: Missing controller reset\n");
 		ret = PTR_ERR(rst);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
+
 		goto clk_free;
 	}
 	reset_control_assert(rst);
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 330ffed011e0..9c9e10ea9199 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -189,8 +189,6 @@ struct stm32f7_i2c_regs {
 /**
  * struct stm32f7_i2c_spec - private i2c specification timing
  * @rate: I2C bus speed (Hz)
- * @rate_min: 80% of I2C bus speed (Hz)
- * @rate_max: 100% of I2C bus speed (Hz)
  * @fall_max: Max fall time of both SDA and SCL signals (ns)
  * @rise_max: Max rise time of both SDA and SCL signals (ns)
  * @hddat_min: Min data hold time (ns)
@@ -201,8 +199,6 @@ struct stm32f7_i2c_regs {
  */
 struct stm32f7_i2c_spec {
 	u32 rate;
-	u32 rate_min;
-	u32 rate_max;
 	u32 fall_max;
 	u32 rise_max;
 	u32 hddat_min;
@@ -214,7 +210,6 @@ struct stm32f7_i2c_spec {
 
 /**
  * struct stm32f7_i2c_setup - private I2C timing setup parameters
- * @speed: I2C speed mode (standard, Fast Plus)
  * @speed_freq: I2C speed frequency  (Hz)
  * @clock_src: I2C clock source frequency (Hz)
  * @rise_time: Rise time (ns)
@@ -224,7 +219,6 @@ struct stm32f7_i2c_spec {
  * @fmp_clr_offset: Fast Mode Plus clear register offset from set register
  */
 struct stm32f7_i2c_setup {
-	enum stm32_i2c_speed speed;
 	u32 speed_freq;
 	u32 clock_src;
 	u32 rise_time;
@@ -287,7 +281,7 @@ struct stm32f7_i2c_msg {
  * @base: virtual memory area
  * @complete: completion of I2C message
  * @clk: hw i2c clock
- * @speed: I2C clock frequency of the controller. Standard, Fast or Fast+
+ * @bus_rate: I2C clock frequency of the controller
  * @msg: Pointer to data to be written
  * @msg_num: number of I2C messages to be executed
  * @msg_id: message identifiant
@@ -314,7 +308,7 @@ struct stm32f7_i2c_dev {
 	void __iomem *base;
 	struct completion complete;
 	struct clk *clk;
-	int speed;
+	unsigned int bus_rate;
 	struct i2c_msg *msg;
 	unsigned int msg_num;
 	unsigned int msg_id;
@@ -342,11 +336,9 @@ struct stm32f7_i2c_dev {
  * Table10. Characteristics of the SDA and SCL bus lines for Standard, Fast,
  * and Fast-mode Plus I2C-bus devices
  */
-static struct stm32f7_i2c_spec i2c_specs[] = {
-	[STM32_I2C_SPEED_STANDARD] = {
+static struct stm32f7_i2c_spec stm32f7_i2c_specs[] = {
+	{
 		.rate = I2C_MAX_STANDARD_MODE_FREQ,
-		.rate_min = I2C_MAX_STANDARD_MODE_FREQ * 8 / 10,	/* 80% */
-		.rate_max = I2C_MAX_STANDARD_MODE_FREQ,
 		.fall_max = 300,
 		.rise_max = 1000,
 		.hddat_min = 0,
@@ -355,10 +347,8 @@ static struct stm32f7_i2c_spec i2c_specs[] = {
 		.l_min = 4700,
 		.h_min = 4000,
 	},
-	[STM32_I2C_SPEED_FAST] = {
+	{
 		.rate = I2C_MAX_FAST_MODE_FREQ,
-		.rate_min = I2C_MAX_FAST_MODE_FREQ * 8 / 10,		/* 80% */
-		.rate_max = I2C_MAX_FAST_MODE_FREQ,
 		.fall_max = 300,
 		.rise_max = 300,
 		.hddat_min = 0,
@@ -367,10 +357,8 @@ static struct stm32f7_i2c_spec i2c_specs[] = {
 		.l_min = 1300,
 		.h_min = 600,
 	},
-	[STM32_I2C_SPEED_FAST_PLUS] = {
+	{
 		.rate = I2C_MAX_FAST_MODE_PLUS_FREQ,
-		.rate_min = I2C_MAX_FAST_MODE_PLUS_FREQ * 8 / 10,	/* 80% */
-		.rate_max = I2C_MAX_FAST_MODE_PLUS_FREQ,
 		.fall_max = 100,
 		.rise_max = 120,
 		.hddat_min = 0,
@@ -411,10 +399,23 @@ static void stm32f7_i2c_disable_irq(struct stm32f7_i2c_dev *i2c_dev, u32 mask)
 	stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, mask);
 }
 
+static struct stm32f7_i2c_spec *stm32f7_get_specs(u32 rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(stm32f7_i2c_specs); i++)
+		if (rate <= stm32f7_i2c_specs[i].rate)
+			return &stm32f7_i2c_specs[i];
+
+	return ERR_PTR(-EINVAL);
+}
+
+#define	RATE_MIN(rate)	((rate) * 8 / 10)
 static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 				      struct stm32f7_i2c_setup *setup,
 				      struct stm32f7_i2c_timings *output)
 {
+	struct stm32f7_i2c_spec *specs;
 	u32 p_prev = STM32F7_PRESC_MAX;
 	u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC,
 				       setup->clock_src);
@@ -432,18 +433,19 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 	u16 p, l, a, h;
 	int ret = 0;
 
-	if (setup->speed >= STM32_I2C_SPEED_END) {
-		dev_err(i2c_dev->dev, "speed out of bound {%d/%d}\n",
-			setup->speed, STM32_I2C_SPEED_END - 1);
+	specs = stm32f7_get_specs(setup->speed_freq);
+	if (specs == ERR_PTR(-EINVAL)) {
+		dev_err(i2c_dev->dev, "speed out of bound {%d}\n",
+			setup->speed_freq);
 		return -EINVAL;
 	}
 
-	if ((setup->rise_time > i2c_specs[setup->speed].rise_max) ||
-	    (setup->fall_time > i2c_specs[setup->speed].fall_max)) {
+	if ((setup->rise_time > specs->rise_max) ||
+	    (setup->fall_time > specs->fall_max)) {
 		dev_err(i2c_dev->dev,
 			"timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
-			setup->rise_time, i2c_specs[setup->speed].rise_max,
-			setup->fall_time, i2c_specs[setup->speed].fall_max);
+			setup->rise_time, specs->rise_max,
+			setup->fall_time, specs->fall_max);
 		return -EINVAL;
 	}
 
@@ -454,12 +456,6 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 		return -EINVAL;
 	}
 
-	if (setup->speed_freq > i2c_specs[setup->speed].rate) {
-		dev_err(i2c_dev->dev, "ERROR: Freq {%d/%d}\n",
-			setup->speed_freq, i2c_specs[setup->speed].rate);
-		return -EINVAL;
-	}
-
 	/*  Analog and Digital Filters */
 	af_delay_min =
 		(setup->analog_filter ?
@@ -469,13 +465,13 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 		 STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0);
 	dnf_delay = setup->dnf * i2cclk;
 
-	sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time -
+	sdadel_min = specs->hddat_min + setup->fall_time -
 		af_delay_min - (setup->dnf + 3) * i2cclk;
 
-	sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time -
+	sdadel_max = specs->vddat_max - setup->rise_time -
 		af_delay_max - (setup->dnf + 4) * i2cclk;
 
-	scldel_min = setup->rise_time + i2c_specs[setup->speed].sudat_min;
+	scldel_min = setup->rise_time + specs->sudat_min;
 
 	if (sdadel_min < 0)
 		sdadel_min = 0;
@@ -530,8 +526,8 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 
 	tsync = af_delay_min + dnf_delay + (2 * i2cclk);
 	s = NULL;
-	clk_max = NSEC_PER_SEC / i2c_specs[setup->speed].rate_min;
-	clk_min = NSEC_PER_SEC / i2c_specs[setup->speed].rate_max;
+	clk_max = NSEC_PER_SEC / RATE_MIN(setup->speed_freq);
+	clk_min = NSEC_PER_SEC / setup->speed_freq;
 
 	/*
 	 * Among Prescaler possibilities discovered above figures out SCL Low
@@ -549,7 +545,7 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 		for (l = 0; l < STM32F7_SCLL_MAX; l++) {
 			u32 tscl_l = (l + 1) * prescaler + tsync;
 
-			if ((tscl_l < i2c_specs[setup->speed].l_min) ||
+			if ((tscl_l < specs->l_min) ||
 			    (i2cclk >=
 			     ((tscl_l - af_delay_min - dnf_delay) / 4))) {
 				continue;
@@ -561,7 +557,7 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 					setup->rise_time + setup->fall_time;
 
 				if ((tscl >= clk_min) && (tscl <= clk_max) &&
-				    (tscl_h >= i2c_specs[setup->speed].h_min) &&
+				    (tscl_h >= specs->h_min) &&
 				    (i2cclk < tscl_h)) {
 					int clk_error = tscl - i2cbus;
 
@@ -607,6 +603,17 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 	return ret;
 }
 
+static u32 stm32f7_get_lower_rate(u32 rate)
+{
+	int i = ARRAY_SIZE(stm32f7_i2c_specs);
+
+	while (i--)
+		if (stm32f7_i2c_specs[i].rate < rate)
+			break;
+
+	return stm32f7_i2c_specs[i].rate;
+}
+
 static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 				    struct stm32f7_i2c_setup *setup)
 {
@@ -619,18 +626,15 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 
 	i2c_parse_fw_timings(i2c_dev->dev, t, false);
 
-	if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_PLUS_FREQ)
-		i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS;
-	else if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_FREQ)
-		i2c_dev->speed = STM32_I2C_SPEED_FAST;
-	else
-		i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
+	if (t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) {
+		dev_err(i2c_dev->dev, "Invalid bus speed (%i>%i)\n",
+			t->bus_freq_hz, I2C_MAX_FAST_MODE_PLUS_FREQ);
+		return -EINVAL;
+	}
 
+	setup->speed_freq = t->bus_freq_hz;
 	i2c_dev->setup.rise_time = t->scl_rise_ns;
 	i2c_dev->setup.fall_time = t->scl_fall_ns;
-
-	setup->speed = i2c_dev->speed;
-	setup->speed_freq = i2c_specs[setup->speed].rate;
 	setup->clock_src = clk_get_rate(i2c_dev->clk);
 
 	if (!setup->clock_src) {
@@ -644,17 +648,13 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 		if (ret) {
 			dev_err(i2c_dev->dev,
 				"failed to compute I2C timings.\n");
-			if (i2c_dev->speed > STM32_I2C_SPEED_STANDARD) {
-				i2c_dev->speed--;
-				setup->speed = i2c_dev->speed;
-				setup->speed_freq =
-					i2c_specs[setup->speed].rate;
-				dev_warn(i2c_dev->dev,
-					 "downgrade I2C Speed Freq to (%i)\n",
-					 i2c_specs[setup->speed].rate);
-			} else {
+			if (setup->speed_freq <= I2C_MAX_STANDARD_MODE_FREQ)
 				break;
-			}
+			setup->speed_freq =
+				stm32f7_get_lower_rate(setup->speed_freq);
+			dev_warn(i2c_dev->dev,
+				 "downgrade I2C Speed Freq to (%i)\n",
+				 setup->speed_freq);
 		}
 	} while (ret);
 
@@ -663,13 +663,15 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 		return ret;
 	}
 
-	dev_dbg(i2c_dev->dev, "I2C Speed(%i), Freq(%i), Clk Source(%i)\n",
-		setup->speed, setup->speed_freq, setup->clock_src);
+	dev_dbg(i2c_dev->dev, "I2C Speed(%i), Clk Source(%i)\n",
+		setup->speed_freq, setup->clock_src);
 	dev_dbg(i2c_dev->dev, "I2C Rise(%i) and Fall(%i) Time\n",
 		setup->rise_time, setup->fall_time);
 	dev_dbg(i2c_dev->dev, "I2C Analog Filter(%s), DNF(%i)\n",
 		(setup->analog_filter ? "On" : "Off"), setup->dnf);
 
+	i2c_dev->bus_rate = setup->speed_freq;
+
 	return 0;
 }
 
@@ -1462,7 +1464,8 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
 
 	/* NACK received */
 	if (status & STM32F7_I2C_ISR_NACKF) {
-		dev_dbg(i2c_dev->dev, "<%s>: Receive NACK\n", __func__);
+		dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
+			__func__, f7_msg->addr);
 		writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
 		f7_msg->result = -ENXIO;
 	}
@@ -1866,7 +1869,7 @@ static int stm32f7_i2c_write_fm_plus_bits(struct stm32f7_i2c_dev *i2c_dev,
 {
 	int ret;
 
-	if (i2c_dev->speed != STM32_I2C_SPEED_FAST_PLUS ||
+	if (i2c_dev->bus_rate <= I2C_MAX_FAST_MODE_FREQ ||
 	    IS_ERR_OR_NULL(i2c_dev->regmap))
 		/* Optional */
 		return 0;
@@ -1940,8 +1943,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (!i2c_dev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+	i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(i2c_dev->base))
 		return PTR_ERR(i2c_dev->base);
 	phy_addr = (dma_addr_t)res->start;
@@ -1967,7 +1969,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk)) {
-		dev_err(&pdev->dev, "Error: Missing controller clock\n");
+		if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get controller clock\n");
 		return PTR_ERR(i2c_dev->clk);
 	}
 
@@ -1979,8 +1982,10 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	rst = devm_reset_control_get(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
-		dev_err(&pdev->dev, "Error: Missing controller reset\n");
 		ret = PTR_ERR(rst);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
+
 		goto clk_free;
 	}
 	reset_control_assert(rst);
@@ -2020,7 +2025,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		goto clk_free;
 
-	if (i2c_dev->speed == STM32_I2C_SPEED_FAST_PLUS) {
+	/* Setup Fast mode plus if necessary */
+	if (i2c_dev->bus_rate > I2C_MAX_FAST_MODE_FREQ) {
 		ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
 		if (ret)
 			goto clk_free;
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index ba6b60caa45e..64d739baf480 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -860,7 +860,6 @@ static int stu300_probe(struct platform_device *pdev)
 {
 	struct stu300_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *res;
 	int bus_nr;
 	int ret = 0;
 
@@ -876,8 +875,7 @@ static int stu300_probe(struct platform_device *pdev)
 	}
 
 	dev->pdev = pdev;
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dev->virtbase = devm_ioremap_resource(&pdev->dev, res);
+	dev->virtbase = devm_platform_ioremap_resource(pdev, 0);
 	dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
 		"base %p\n", bus_nr, dev->virtbase);
 	if (IS_ERR(dev->virtbase))
diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c
index e5293f0b3318..2f6f6468214d 100644
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -187,7 +187,6 @@ static int p2wi_probe(struct platform_device *pdev)
 	struct device_node *childnp;
 	unsigned long parent_clk_freq;
 	u32 clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
-	struct resource *r;
 	struct p2wi *p2wi;
 	u32 slave_addr;
 	int clk_div;
@@ -231,17 +230,14 @@ static int p2wi_probe(struct platform_device *pdev)
 		p2wi->slave_addr = slave_addr;
 	}
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	p2wi->regs = devm_ioremap_resource(dev, r);
+	p2wi->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(p2wi->regs))
 		return PTR_ERR(p2wi->regs);
 
 	strlcpy(p2wi->adapter.name, pdev->name, sizeof(p2wi->adapter.name));
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "failed to retrieve irq: %d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
 	p2wi->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(p2wi->clk)) {
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
index 9099d0a67ace..c9a3dba6a75d 100644
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -536,7 +536,6 @@ static const struct i2c_adapter synquacer_i2c_ops = {
 static int synquacer_i2c_probe(struct platform_device *pdev)
 {
 	struct synquacer_i2c *i2c;
-	struct resource *r;
 	u32 bus_speed;
 	int ret;
 
@@ -574,16 +573,13 @@ static int synquacer_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->base = devm_ioremap_resource(&pdev->dev, r);
+	i2c->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->base))
 		return PTR_ERR(i2c->base);
 
 	i2c->irq = platform_get_irq(pdev, 0);
-	if (i2c->irq < 0) {
-		dev_err(&pdev->dev, "no IRQ resource found\n");
+	if (i2c->irq < 0)
 		return -ENODEV;
-	}
 
 	ret = devm_request_irq(&pdev->dev, i2c->irq, synquacer_i2c_isr,
 			       0, dev_name(&pdev->dev), i2c);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 8280ac7cc1b7..4c4d17ddc96b 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -996,13 +996,14 @@ tegra_i2c_poll_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 	do {
 		u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
-		if (status)
+		if (status) {
 			tegra_i2c_isr(i2c_dev->irq, i2c_dev);
 
-		if (completion_done(complete)) {
-			s64 delta = ktime_ms_delta(ktimeout, ktime);
+			if (completion_done(complete)) {
+				s64 delta = ktime_ms_delta(ktimeout, ktime);
 
-			return msecs_to_jiffies(delta) ?: 1;
+				return msecs_to_jiffies(delta) ?: 1;
+			}
 		}
 
 		ktime = ktime_get();
@@ -1029,18 +1030,14 @@ tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 		disable_irq(i2c_dev->irq);
 
 		/*
-		 * Under some rare circumstances (like running KASAN +
-		 * NFS root) CPU, which handles interrupt, may stuck in
-		 * uninterruptible state for a significant time.  In this
-		 * case we will get timeout if I2C transfer is running on
-		 * a sibling CPU, despite of IRQ being raised.
-		 *
-		 * In order to handle this rare condition, the IRQ status
-		 * needs to be checked after timeout.
+		 * There is a chance that completion may happen after IRQ
+		 * synchronization, which is done by disable_irq().
 		 */
-		if (ret == 0)
-			ret = tegra_i2c_poll_completion_timeout(i2c_dev,
-								complete, 0);
+		if (ret == 0 && completion_done(complete)) {
+			dev_warn(i2c_dev->dev,
+				 "completion done after timeout\n");
+			ret = 1;
+		}
 	}
 
 	return ret;
@@ -1219,15 +1216,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		time_left = tegra_i2c_wait_completion_timeout(
 				i2c_dev, &i2c_dev->dma_complete, xfer_time);
 
-		/*
-		 * Synchronize DMA first, since dmaengine_terminate_sync()
-		 * performs synchronization after the transfer's termination
-		 * and we want to get a completion if transfer succeeded.
-		 */
-		dmaengine_synchronize(i2c_dev->msg_read ?
-				      i2c_dev->rx_dma_chan :
-				      i2c_dev->tx_dma_chan);
-
 		dmaengine_terminate_sync(i2c_dev->msg_read ?
 					 i2c_dev->rx_dma_chan :
 					 i2c_dev->tx_dma_chan);
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index 2b258d54d68c..cb4666c54a23 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -529,10 +529,8 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->membase);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "failed to get IRQ number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
 		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 668b1fa2b0ef..ee00a44bf4c7 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -324,10 +324,8 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->membase);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "failed to get IRQ number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
 		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index 391c878a7cdc..f2241cedf5d3 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -506,23 +506,19 @@ static int xlp9xx_i2c_smbus_setup(struct xlp9xx_i2c_dev *priv,
 static int xlp9xx_i2c_probe(struct platform_device *pdev)
 {
 	struct xlp9xx_i2c_dev *priv;
-	struct resource *res;
 	int err = 0;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
 	priv->irq = platform_get_irq(pdev, 0);
-	if (priv->irq <= 0) {
-		dev_err(&pdev->dev, "invalid irq!\n");
+	if (priv->irq <= 0)
 		return priv->irq;
-	}
 	/* SMBAlert irq */
 	priv->alert_data.irq = platform_get_irq(pdev, 1);
 	if (priv->alert_data.irq <= 0)
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 282f161a8b08..126d1393e548 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -362,7 +362,6 @@ static int xlr_i2c_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *match;
 	struct xlr_i2c_private  *priv;
-	struct resource *res;
 	struct clk *clk;
 	unsigned long clk_rate;
 	unsigned long clk_div;
@@ -380,8 +379,7 @@ static int xlr_i2c_probe(struct platform_device *pdev)
 	else
 		priv->cfg = &xlr_i2c_config_default;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->iobase = devm_ioremap_resource(&pdev->dev, res);
+	priv->iobase = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->iobase))
 		return PTR_ERR(priv->iobase);
 
diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c
index 5f3318559b8d..8db9519695a6 100644
--- a/drivers/i2c/busses/i2c-zx2967.c
+++ b/drivers/i2c/busses/i2c-zx2967.c
@@ -502,7 +502,6 @@ static int zx2967_i2c_probe(struct platform_device *pdev)
 {
 	struct zx2967_i2c *i2c;
 	void __iomem *reg_base;
-	struct resource *res;
 	struct clk *clk;
 	int ret;
 
@@ -510,8 +509,7 @@ static int zx2967_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg_base = devm_ioremap_resource(&pdev->dev, res);
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg_base))
 		return PTR_ERR(reg_base);
 
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index a66912782064..139aea351ffb 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1588,6 +1588,18 @@ void i2c_del_adapter(struct i2c_adapter *adap)
 }
 EXPORT_SYMBOL(i2c_del_adapter);
 
+static void i2c_parse_timing(struct device *dev, char *prop_name, u32 *cur_val_p,
+			    u32 def_val, bool use_def)
+{
+	int ret;
+
+	ret = device_property_read_u32(dev, prop_name, cur_val_p);
+	if (ret && use_def)
+		*cur_val_p = def_val;
+
+	dev_dbg(dev, "%s: %u\n", prop_name, *cur_val_p);
+}
+
 /**
  * i2c_parse_fw_timings - get I2C related timing parameters from firmware
  * @dev: The device to scan for I2C timing properties
@@ -1606,49 +1618,28 @@ EXPORT_SYMBOL(i2c_del_adapter);
  */
 void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
 {
-	int ret;
-
-	ret = device_property_read_u32(dev, "clock-frequency", &t->bus_freq_hz);
-	if (ret && use_defaults)
-		t->bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
-
-	ret = device_property_read_u32(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns);
-	if (ret && use_defaults) {
-		if (t->bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ)
-			t->scl_rise_ns = 1000;
-		else if (t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ)
-			t->scl_rise_ns = 300;
-		else
-			t->scl_rise_ns = 120;
-	}
-
-	ret = device_property_read_u32(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns);
-	if (ret && use_defaults) {
-		if (t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ)
-			t->scl_fall_ns = 300;
-		else
-			t->scl_fall_ns = 120;
-	}
-
-	ret = device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns);
-	if (ret && use_defaults)
-		t->scl_int_delay_ns = 0;
+	bool u = use_defaults;
+	u32 d;
 
-	ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns);
-	if (ret && use_defaults)
-		t->sda_fall_ns = t->scl_fall_ns;
+	i2c_parse_timing(dev, "clock-frequency", &t->bus_freq_hz,
+			 I2C_MAX_STANDARD_MODE_FREQ, u);
 
-	ret = device_property_read_u32(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns);
-	if (ret && use_defaults)
-		t->sda_hold_ns = 0;
+	d = t->bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ ? 1000 :
+	    t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
+	i2c_parse_timing(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns, d, u);
 
-	ret = device_property_read_u32(dev, "i2c-digital-filter-width-ns", &t->digital_filter_width_ns);
-	if (ret && use_defaults)
-		t->digital_filter_width_ns = 0;
+	d = t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
+	i2c_parse_timing(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns, d, u);
 
-	ret = device_property_read_u32(dev, "i2c-analog-filter-cutoff-frequency", &t->analog_filter_cutoff_freq_hz);
-	if (ret && use_defaults)
-		t->analog_filter_cutoff_freq_hz = 0;
+	i2c_parse_timing(dev, "i2c-scl-internal-delay-ns",
+			 &t->scl_int_delay_ns, 0, u);
+	i2c_parse_timing(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns,
+			 t->scl_fall_ns, u);
+	i2c_parse_timing(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns, 0, u);
+	i2c_parse_timing(dev, "i2c-digital-filter-width-ns",
+			 &t->digital_filter_width_ns, 0, u);
+	i2c_parse_timing(dev, "i2c-analog-filter-cutoff-frequency",
+			 &t->analog_filter_cutoff_freq_hz, 0, u);
 }
 EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
 
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
index cb415b10642f..f868dfc362a6 100644
--- a/drivers/i2c/i2c-slave-eeprom.c
+++ b/drivers/i2c/i2c-slave-eeprom.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/bitfield.h>
+#include <linux/firmware.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -120,6 +121,26 @@ static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kob
 	return count;
 }
 
+static int i2c_slave_init_eeprom_data(struct eeprom_data *eeprom, struct i2c_client *client,
+				      unsigned int size)
+{
+	const struct firmware *fw;
+	const char *eeprom_data;
+	int ret = device_property_read_string(&client->dev, "firmware-name", &eeprom_data);
+
+	if (!ret) {
+		ret = request_firmware_into_buf(&fw, eeprom_data, &client->dev,
+						eeprom->buffer, size);
+		if (ret)
+			return ret;
+		release_firmware(fw);
+	} else {
+		/* An empty eeprom typically has all bits set to 1 */
+		memset(eeprom->buffer, 0xff, size);
+	}
+	return 0;
+}
+
 static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct eeprom_data *eeprom;
@@ -138,6 +159,10 @@ static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_de
 	spin_lock_init(&eeprom->buffer_lock);
 	i2c_set_clientdata(client, eeprom);
 
+	ret = i2c_slave_init_eeprom_data(eeprom, client, size);
+	if (ret)
+		return ret;
+
 	sysfs_bin_attr_init(&eeprom->bin);
 	eeprom->bin.attr.name = "slave-eeprom";
 	eeprom->bin.attr.mode = S_IRUSR | S_IWUSR;
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index d79cd6d54b3a..97f2e29265da 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1008,7 +1008,6 @@ static int i3c_master_getmrl_locked(struct i3c_master_controller *master,
 				    struct i3c_device_info *info)
 {
 	struct i3c_ccc_cmd_dest dest;
-	unsigned int expected_len;
 	struct i3c_ccc_mrl *mrl;
 	struct i3c_ccc_cmd cmd;
 	int ret;
@@ -1024,22 +1023,23 @@ static int i3c_master_getmrl_locked(struct i3c_master_controller *master,
 	if (!(info->bcr & I3C_BCR_IBI_PAYLOAD))
 		dest.payload.len -= 1;
 
-	expected_len = dest.payload.len;
 	i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMRL, &dest, 1);
 	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
 	if (ret)
 		goto out;
 
-	if (dest.payload.len != expected_len) {
+	switch (dest.payload.len) {
+	case 3:
+		info->max_ibi_len = mrl->ibi_len;
+		fallthrough;
+	case 2:
+		info->max_read_len = be16_to_cpu(mrl->read_len);
+		break;
+	default:
 		ret = -EIO;
 		goto out;
 	}
 
-	info->max_read_len = be16_to_cpu(mrl->read_len);
-
-	if (info->bcr & I3C_BCR_IBI_PAYLOAD)
-		info->max_ibi_len = mrl->ibi_len;
-
 out:
 	i3c_ccc_cmd_dest_cleanup(&dest);
 
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index b137f27a34d5..c31f1d2b3b07 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -233,10 +233,13 @@ static ide_startstop_t do_special(ide_drive_t *drive)
 void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct scatterlist *sg = hwif->sg_table;
+	struct scatterlist *sg = hwif->sg_table, *last_sg = NULL;
 	struct request *rq = cmd->rq;
 
-	cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
+	cmd->sg_nents = __blk_rq_map_sg(drive->queue, rq, sg, &last_sg);
+	if (blk_rq_bytes(rq) && (blk_rq_bytes(rq) & rq->q->dma_pad_mask))
+		last_sg->length +=
+			(rq->q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1;
 }
 EXPORT_SYMBOL_GPL(ide_map_sg);
 
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 5d91a6dda894..24ebe9e76915 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -238,7 +238,7 @@ config IIO_ST_ACCEL_3AXIS
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
 	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
-	  LNG2DM, LIS3DE, LIS2DE12
+	  LNG2DM, LIS3DE, LIS2DE12, LIS2HH12
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:
diff --git a/drivers/iio/accel/kxsd9-i2c.c b/drivers/iio/accel/kxsd9-i2c.c
index 38411e1c155b..b6f3de7ef8ea 100644
--- a/drivers/iio/accel/kxsd9-i2c.c
+++ b/drivers/iio/accel/kxsd9-i2c.c
@@ -21,8 +21,8 @@ static int kxsd9_i2c_probe(struct i2c_client *i2c,
 
 	regmap = devm_regmap_init_i2c(i2c, &config);
 	if (IS_ERR(regmap)) {
-		dev_err(&i2c->dev, "Failed to register i2c regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&i2c->dev, "Failed to register i2c regmap: %pe\n",
+			regmap);
 		return PTR_ERR(regmap);
 	}
 
diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c
index 3d5bea651923..9d07642c0de1 100644
--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -135,7 +135,7 @@ static int mxc4005_read_xyz(struct mxc4005_data *data)
 	int ret;
 
 	ret = regmap_bulk_read(data->regmap, MXC4005_REG_XOUT_UPPER,
-			       (u8 *) data->buffer, sizeof(data->buffer));
+			       data->buffer, sizeof(data->buffer));
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read axes\n");
 		return ret;
@@ -150,7 +150,7 @@ static int mxc4005_read_axis(struct mxc4005_data *data,
 	__be16 reg;
 	int ret;
 
-	ret = regmap_bulk_read(data->regmap, addr, (u8 *) &reg, sizeof(reg));
+	ret = regmap_bulk_read(data->regmap, addr, &reg, sizeof(reg));
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read reg %02x\n", addr);
 		return ret;
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 5b13e293cade..5d356288e001 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -35,6 +35,7 @@ enum st_accel_type {
 	LIS2DW12,
 	LIS3DHH,
 	LIS2DE12,
+	LIS2HH12,
 	ST_ACCEL_MAX,
 };
 
@@ -59,6 +60,7 @@ enum st_accel_type {
 #define LIS3DHH_ACCEL_DEV_NAME		"lis3dhh"
 #define LIS3DE_ACCEL_DEV_NAME		"lis3de"
 #define LIS2DE12_ACCEL_DEV_NAME		"lis2de12"
+#define LIS2HH12_ACCEL_DEV_NAME		"lis2hh12"
 
 /**
 * struct st_sensors_platform_data - default accel platform data
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index 9f2b40474b8e..b5c814ef1637 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -37,8 +37,7 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
 	if (err < 0)
 		return err;
 
-	err = st_sensors_set_axis_enable(indio_dev,
-					 (u8)indio_dev->active_scan_mask[0]);
+	err = st_sensors_set_axis_enable(indio_dev, indio_dev->active_scan_mask[0]);
 	if (err < 0)
 		goto st_accel_buffer_predisable;
 
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 7320275c7e56..43c50167d220 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -904,6 +904,83 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		.multi_read_bit = true,
 		.bootime = 2,
 	},
+	{
+		.wai = 0x41,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LIS2HH12_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0x70,
+			.odr_avl = {
+				{ .hz = 10, .value = 0x01, },
+				{ .hz = 50, .value = 0x02, },
+				{ .hz = 100, .value = 0x03, },
+				{ .hz = 200, .value = 0x04, },
+				{ .hz = 400, .value = 0x05, },
+				{ .hz = 800, .value = 0x06, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0x70,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(61),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(122),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(244),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x20,
+			.mask = 0x08,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x01,
+			},
+			.int2 = {
+				.addr = 0x25,
+				.mask = 0x01,
+			},
+			.addr_ihl = 0x24,
+			.mask_ihl = 0x02,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+
 };
 
 static int st_accel_read_raw(struct iio_dev *indio_dev,
@@ -1170,8 +1247,7 @@ EXPORT_SYMBOL(st_accel_get_settings);
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
-	struct st_sensors_platform_data *pdata =
-		(struct st_sensors_platform_data *)adata->dev->platform_data;
+	struct st_sensors_platform_data *pdata = dev_get_platdata(adata->dev);
 	struct iio_chan_spec *channels;
 	size_t channels_size;
 	int err;
@@ -1204,8 +1280,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 			 "failed to apply ACPI orientation data: %d\n", err);
 
 	indio_dev->channels = channels;
-	adata->current_fullscale = (struct st_sensor_fullscale_avl *)
-					&adata->sensor_settings->fs.fs_avl[0];
+	adata->current_fullscale = &adata->sensor_settings->fs.fs_avl[0];
 	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
 
 	if (!pdata)
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 6b283be26ebc..360e16f2cadb 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -104,6 +104,10 @@ static const struct of_device_id st_accel_of_match[] = {
 		.compatible = "st,lis2de12",
 		.data = LIS2DE12_ACCEL_DEV_NAME,
 	},
+	{
+		.compatible = "st,lis2hh12",
+		.data = LIS2HH12_ACCEL_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -138,6 +142,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
 	{ LIS2DW12_ACCEL_DEV_NAME },
 	{ LIS3DE_ACCEL_DEV_NAME },
 	{ LIS2DE12_ACCEL_DEV_NAME },
+	{ LIS2HH12_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 12bb8b7ca1ff..c48c00077775 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -246,6 +246,41 @@ config AD799X
 	  To compile this driver as a module, choose M here: the module will be
 	  called ad799x.
 
+config AD9467
+	tristate "Analog Devices AD9467 High Speed ADC driver"
+	depends on SPI
+	select ADI_AXI_ADC
+	help
+	  Say yes here to build support for Analog Devices:
+	  * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter
+
+	  The driver requires the assistance of the AXI ADC IP core to operate,
+	  since SPI is used for configuration only, while data has to be
+	  streamed into memory via DMA.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ad9467.
+
+config ADI_AXI_ADC
+	tristate "Analog Devices Generic AXI ADC IP core driver"
+	select IIO_BUFFER
+	select IIO_BUFFER_HW_CONSUMER
+	select IIO_BUFFER_DMAENGINE
+	help
+	  Say yes here to build support for Analog Devices Generic
+	  AXI ADC IP core. The IP core is used for interfacing with
+	  analog-to-digital (ADC) converters that require either a high-speed
+	  serial interface (JESD204B/C) or a source synchronous parallel
+	  interface (LVDS/CMOS).
+	  Typically (for such devices) SPI will be used for configuration only,
+	  while this IP core handles the streaming of data into memory via DMA.
+
+	  Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adi-axi-adc.
+
 config ASPEED_ADC
 	tristate "Aspeed ADC"
 	depends on ARCH_ASPEED || COMPILE_TEST
@@ -595,6 +630,16 @@ config MAX1118
 	  To compile this driver as a module, choose M here: the module will be
 	  called max1118.
 
+config MAX1241
+	tristate "Maxim max1241 ADC driver"
+	depends on SPI_MASTER
+	help
+	  Say yes here to build support for Maxim max1241 12-bit, single-channel
+	  ADC.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called max1241.
+
 config MAX1363
 	tristate "Maxim max1363 ADC driver"
 	depends on I2C
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 637807861112..2f5bc224412b 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -26,6 +26,8 @@ obj-$(CONFIG_AD7793) += ad7793.o
 obj-$(CONFIG_AD7887) += ad7887.o
 obj-$(CONFIG_AD7949) += ad7949.o
 obj-$(CONFIG_AD799X) += ad799x.o
+obj-$(CONFIG_AD9467) += ad9467.o
+obj-$(CONFIG_ADI_AXI_ADC) += adi-axi-adc.o
 obj-$(CONFIG_ASPEED_ADC) += aspeed_adc.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
 obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
@@ -57,6 +59,7 @@ obj-$(CONFIG_LTC2497) += ltc2497.o ltc2497-core.o
 obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX11100) += max11100.o
 obj-$(CONFIG_MAX1118) += max1118.o
+obj-$(CONFIG_MAX1241) += max1241.o
 obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MAX9611) += max9611.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index 76747488044b..e9984a38fc4c 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -12,9 +12,11 @@
 #include <linux/sysfs.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/bitops.h>
+#include <linux/delay.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -27,6 +29,8 @@ struct ad7476_state;
 struct ad7476_chip_info {
 	unsigned int			int_vref_uv;
 	struct iio_chan_spec		channel[2];
+	/* channels used when convst gpio is defined */
+	struct iio_chan_spec		convst_channel[2];
 	void (*reset)(struct ad7476_state *);
 };
 
@@ -34,6 +38,7 @@ struct ad7476_state {
 	struct spi_device		*spi;
 	const struct ad7476_chip_info	*chip_info;
 	struct regulator		*reg;
+	struct gpio_desc		*convst_gpio;
 	struct spi_transfer		xfer;
 	struct spi_message		msg;
 	/*
@@ -64,6 +69,17 @@ enum ad7476_supported_device_ids {
 	ID_ADS7868,
 };
 
+static void ad7091_convst(struct ad7476_state *st)
+{
+	if (!st->convst_gpio)
+		return;
+
+	gpiod_set_value(st->convst_gpio, 0);
+	udelay(1); /* CONVST pulse width: 10 ns min */
+	gpiod_set_value(st->convst_gpio, 1);
+	udelay(1); /* Conversion time: 650 ns max */
+}
+
 static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 {
 	struct iio_poll_func *pf = p;
@@ -71,6 +87,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 	struct ad7476_state *st = iio_priv(indio_dev);
 	int b_sent;
 
+	ad7091_convst(st);
+
 	b_sent = spi_sync(st->spi, &st->msg);
 	if (b_sent < 0)
 		goto done;
@@ -93,6 +111,8 @@ static int ad7476_scan_direct(struct ad7476_state *st)
 {
 	int ret;
 
+	ad7091_convst(st);
+
 	ret = spi_sync(st->spi, &st->msg);
 	if (ret)
 		return ret;
@@ -160,6 +180,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 #define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \
 		BIT(IIO_CHAN_INFO_RAW))
 #define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0)
+#define AD7091R_CONVST_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), \
+		BIT(IIO_CHAN_INFO_RAW))
 #define ADS786X_CHAN(bits) _AD7476_CHAN((bits), 12 - (bits), \
 		BIT(IIO_CHAN_INFO_RAW))
 
@@ -167,6 +189,8 @@ static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
 	[ID_AD7091R] = {
 		.channel[0] = AD7091R_CHAN(12),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+		.convst_channel[0] = AD7091R_CONVST_CHAN(12),
+		.convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 		.reset = ad7091_reset,
 	},
 	[ID_AD7276] = {
@@ -232,6 +256,13 @@ static const struct iio_info ad7476_info = {
 	.read_raw = &ad7476_read_raw,
 };
 
+static void ad7476_reg_disable(void *data)
+{
+	struct ad7476_state *st = data;
+
+	regulator_disable(st->reg);
+}
+
 static int ad7476_probe(struct spi_device *spi)
 {
 	struct ad7476_state *st;
@@ -254,6 +285,17 @@ static int ad7476_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
+	ret = devm_add_action_or_reset(&spi->dev, ad7476_reg_disable,
+				       st);
+	if (ret)
+		return ret;
+
+	st->convst_gpio = devm_gpiod_get_optional(&spi->dev,
+						  "adi,conversion-start",
+						  GPIOD_OUT_LOW);
+	if (IS_ERR(st->convst_gpio))
+		return PTR_ERR(st->convst_gpio);
+
 	spi_set_drvdata(spi, indio_dev);
 
 	st->spi = spi;
@@ -266,6 +308,9 @@ static int ad7476_probe(struct spi_device *spi)
 	indio_dev->channels = st->chip_info->channel;
 	indio_dev->num_channels = 2;
 	indio_dev->info = &ad7476_info;
+
+	if (st->convst_gpio && st->chip_info->convst_channel)
+		indio_dev->channels = st->chip_info->convst_channel;
 	/* Setup default message */
 
 	st->xfer.rx_buf = &st->data;
@@ -295,19 +340,8 @@ static int ad7476_probe(struct spi_device *spi)
 	return ret;
 }
 
-static int ad7476_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-	struct ad7476_state *st = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-	regulator_disable(st->reg);
-
-	return 0;
-}
-
 static const struct spi_device_id ad7476_id[] = {
+	{"ad7091", ID_AD7091R},
 	{"ad7091r", ID_AD7091R},
 	{"ad7273", ID_AD7277},
 	{"ad7274", ID_AD7276},
@@ -343,7 +377,6 @@ static struct spi_driver ad7476_driver = {
 		.name	= "ad7476",
 	},
 	.probe		= ad7476_probe,
-	.remove		= ad7476_remove,
 	.id_table	= ad7476_id,
 };
 module_spi_driver(ad7476_driver);
diff --git a/drivers/iio/adc/ad7780.c b/drivers/iio/adc/ad7780.c
index 291c1a898129..f47606ebbbbe 100644
--- a/drivers/iio/adc/ad7780.c
+++ b/drivers/iio/adc/ad7780.c
@@ -206,10 +206,29 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = {
 	.irq_flags = IRQF_TRIGGER_LOW,
 };
 
-#define AD7780_CHANNEL(bits, wordsize) \
-	AD_SD_CHANNEL(1, 0, 0, bits, 32, (wordsize) - (bits))
-#define AD7170_CHANNEL(bits, wordsize) \
-	AD_SD_CHANNEL_NO_SAMP_FREQ(1, 0, 0, bits, 32, (wordsize) - (bits))
+#define _AD7780_CHANNEL(_bits, _wordsize, _mask_all)		\
+{								\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = 0,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+		BIT(IIO_CHAN_INFO_OFFSET),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.info_mask_shared_by_all = _mask_all,			\
+	.scan_index = 1,					\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = (_bits),				\
+		.storagebits = 32,				\
+		.shift = (_wordsize) - (_bits),			\
+		.endianness = IIO_BE,				\
+	},							\
+}
+
+#define AD7780_CHANNEL(_bits, _wordsize)	\
+	_AD7780_CHANNEL(_bits, _wordsize, BIT(IIO_CHAN_INFO_SAMP_FREQ))
+#define AD7170_CHANNEL(_bits, _wordsize)	\
+	_AD7780_CHANNEL(_bits, _wordsize, 0)
 
 static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
 	[ID_AD7170] = {
diff --git a/drivers/iio/adc/ad7791.c b/drivers/iio/adc/ad7791.c
index abb239392631..48432b6f6002 100644
--- a/drivers/iio/adc/ad7791.c
+++ b/drivers/iio/adc/ad7791.c
@@ -64,25 +64,73 @@
 #define AD7791_MODE_SEL_MASK		(0x3 << 6)
 #define AD7791_MODE_SEL(x)		((x) << 6)
 
+#define __AD7991_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+	_storagebits, _shift, _extend_name, _type, _mask_all) \
+	{ \
+		.type = (_type), \
+		.differential = (_channel2 == -1 ? 0 : 1), \
+		.indexed = 1, \
+		.channel = (_channel1), \
+		.channel2 = (_channel2), \
+		.address = (_address), \
+		.extend_name = (_extend_name), \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_OFFSET), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = _mask_all, \
+		.scan_index = (_si), \
+		.scan_type = { \
+			.sign = 'u', \
+			.realbits = (_bits), \
+			.storagebits = (_storagebits), \
+			.shift = (_shift), \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+#define AD7991_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
+	_storagebits, _shift) \
+	__AD7991_CHANNEL(_si, _channel, _channel, _address, _bits, \
+		_storagebits, _shift, "shorted", IIO_VOLTAGE, \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7991_CHANNEL(_si, _channel, _address, _bits, \
+	_storagebits, _shift) \
+	__AD7991_CHANNEL(_si, _channel, -1, _address, _bits, \
+		_storagebits, _shift, NULL, IIO_VOLTAGE, \
+		 BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7991_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+	_storagebits, _shift) \
+	__AD7991_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+		_storagebits, _shift, NULL, IIO_VOLTAGE, \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7991_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \
+	_shift) \
+	__AD7991_CHANNEL(_si, _channel, -1, _address, _bits, \
+		_storagebits, _shift, "supply", IIO_VOLTAGE, \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
 #define DECLARE_AD7787_CHANNELS(name, bits, storagebits) \
 const struct iio_chan_spec name[] = { \
-	AD_SD_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
+	AD7991_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
 		(bits), (storagebits), 0), \
-	AD_SD_CHANNEL(1, 1, AD7791_CH_AIN2, (bits), (storagebits), 0), \
-	AD_SD_SHORTED_CHANNEL(2, 0, AD7791_CH_AIN1N_AIN1N, \
+	AD7991_CHANNEL(1, 1, AD7791_CH_AIN2, (bits), (storagebits), 0), \
+	AD7991_SHORTED_CHANNEL(2, 0, AD7791_CH_AIN1N_AIN1N, \
 		(bits), (storagebits), 0), \
-	AD_SD_SUPPLY_CHANNEL(3, 2, AD7791_CH_AVDD_MONITOR,  \
+	AD7991_SUPPLY_CHANNEL(3, 2, AD7791_CH_AVDD_MONITOR,  \
 		(bits), (storagebits), 0), \
 	IIO_CHAN_SOFT_TIMESTAMP(4), \
 }
 
 #define DECLARE_AD7791_CHANNELS(name, bits, storagebits) \
 const struct iio_chan_spec name[] = { \
-	AD_SD_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
+	AD7991_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
 		(bits), (storagebits), 0), \
-	AD_SD_SHORTED_CHANNEL(1, 0, AD7791_CH_AIN1N_AIN1N, \
+	AD7991_SHORTED_CHANNEL(1, 0, AD7791_CH_AIN1N_AIN1N, \
 		(bits), (storagebits), 0), \
-	AD_SD_SUPPLY_CHANNEL(2, 1, AD7791_CH_AVDD_MONITOR, \
+	AD7991_SUPPLY_CHANNEL(2, 1, AD7791_CH_AVDD_MONITOR, \
 		(bits), (storagebits), 0), \
 	IIO_CHAN_SOFT_TIMESTAMP(3), \
 }
@@ -444,5 +492,5 @@ static struct spi_driver ad7791_driver = {
 module_spi_driver(ad7791_driver);
 
 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-MODULE_DESCRIPTION("Analog Device AD7787/AD7788/AD7789/AD7790/AD7791 ADC driver");
+MODULE_DESCRIPTION("Analog Devices AD7787/AD7788/AD7789/AD7790/AD7791 ADC driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index e5691e330323..808485f42415 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -354,29 +354,28 @@ static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
 static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797,
 	sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4");
 
-static ssize_t ad7793_show_scale_available(struct device *dev,
-			struct device_attribute *attr, char *buf)
+static int ad7793_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7793_state *st = iio_priv(indio_dev);
-	int i, len = 0;
 
-	for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
-		len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0],
-			       st->scale_avail[i][1]);
-
-	len += sprintf(buf + len, "\n");
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (int *)st->scale_avail;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		/* Values are stored in a 2D matrix  */
+		*length = ARRAY_SIZE(st->scale_avail) * 2;
 
-	return len;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
 }
 
-static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available,
-		in_voltage-voltage_scale_available, S_IRUGO,
-		ad7793_show_scale_available, NULL, 0);
-
 static struct attribute *ad7793_attributes[] = {
 	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
-	&iio_dev_attr_in_m_in_scale_available.dev_attr.attr,
 	NULL
 };
 
@@ -534,6 +533,7 @@ static const struct iio_info ad7793_info = {
 	.read_raw = &ad7793_read_raw,
 	.write_raw = &ad7793_write_raw,
 	.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
+	.read_avail = ad7793_read_avail,
 	.attrs = &ad7793_attribute_group,
 	.validate_trigger = ad_sd_validate_trigger,
 };
@@ -546,47 +546,113 @@ static const struct iio_info ad7797_info = {
 	.validate_trigger = ad_sd_validate_trigger,
 };
 
+#define __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+	_storagebits, _shift, _extend_name, _type, _mask_type_av, _mask_all) \
+	{ \
+		.type = (_type), \
+		.differential = (_channel2 == -1 ? 0 : 1), \
+		.indexed = 1, \
+		.channel = (_channel1), \
+		.channel2 = (_channel2), \
+		.address = (_address), \
+		.extend_name = (_extend_name), \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_OFFSET), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_type_available = (_mask_type_av), \
+		.info_mask_shared_by_all = _mask_all, \
+		.scan_index = (_si), \
+		.scan_type = { \
+			.sign = 'u', \
+			.realbits = (_bits), \
+			.storagebits = (_storagebits), \
+			.shift = (_shift), \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+#define AD7793_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+	_storagebits, _shift) \
+	__AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+		_storagebits, _shift, NULL, IIO_VOLTAGE, \
+		BIT(IIO_CHAN_INFO_SCALE), \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7793_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
+	_storagebits, _shift) \
+	__AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \
+		_storagebits, _shift, "shorted", IIO_VOLTAGE, \
+		BIT(IIO_CHAN_INFO_SCALE), \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7793_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \
+	__AD7793_CHANNEL(_si, 0, -1, _address, _bits, \
+		_storagebits, _shift, NULL, IIO_TEMP, \
+		0, \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7793_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \
+	_shift) \
+	__AD7793_CHANNEL(_si, _channel, -1, _address, _bits, \
+		_storagebits, _shift, "supply", IIO_VOLTAGE, \
+		0, \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7797_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+	_storagebits, _shift) \
+	__AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+		_storagebits, _shift, NULL, IIO_VOLTAGE, \
+		0, \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7797_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
+	_storagebits, _shift) \
+	__AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \
+		_storagebits, _shift, "shorted", IIO_VOLTAGE, \
+		0, \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
 #define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \
 const struct iio_chan_spec _name##_channels[] = { \
-	AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \
-	AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \
-	AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \
-	AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \
-	AD_SD_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \
-	AD_SD_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \
+	AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \
+	AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \
+	AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \
+	AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \
+	AD7793_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \
+	AD7793_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \
 	IIO_CHAN_SOFT_TIMESTAMP(6), \
 }
 
 #define DECLARE_AD7795_CHANNELS(_name, _b, _sb) \
 const struct iio_chan_spec _name##_channels[] = { \
-	AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
-	AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
-	AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
-	AD_SD_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \
-	AD_SD_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \
-	AD_SD_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \
-	AD_SD_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
-	AD_SD_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \
-	AD_SD_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
+	AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
+	AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
+	AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
+	AD7793_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \
+	AD7793_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \
+	AD7793_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \
+	AD7793_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
+	AD7793_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \
+	AD7793_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
 	IIO_CHAN_SOFT_TIMESTAMP(9), \
 }
 
 #define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \
 const struct iio_chan_spec _name##_channels[] = { \
-	AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
-	AD_SD_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
-	AD_SD_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \
-	AD_SD_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
+	AD7797_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
+	AD7797_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
+	AD7793_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \
+	AD7793_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
 	IIO_CHAN_SOFT_TIMESTAMP(4), \
 }
 
 #define DECLARE_AD7799_CHANNELS(_name, _b, _sb) \
 const struct iio_chan_spec _name##_channels[] = { \
-	AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
-	AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
-	AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
-	AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
-	AD_SD_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
+	AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
+	AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
+	AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
+	AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
+	AD7793_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
 	IIO_CHAN_SOFT_TIMESTAMP(5), \
 }
 
diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
new file mode 100644
index 000000000000..1e8fd83b9bc2
--- /dev/null
+++ b/drivers/iio/adc/ad9467.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices AD9467 SPI ADC driver
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_device.h>
+
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/clk.h>
+
+#include <linux/iio/adc/adi-axi-adc.h>
+
+/*
+ * ADI High-Speed ADC common spi interface registers
+ * See Application-Note AN-877:
+ *   https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf
+ */
+
+#define AN877_ADC_REG_CHIP_PORT_CONF		0x00
+#define AN877_ADC_REG_CHIP_ID			0x01
+#define AN877_ADC_REG_CHIP_GRADE		0x02
+#define AN877_ADC_REG_CHAN_INDEX		0x05
+#define AN877_ADC_REG_TRANSFER			0xFF
+#define AN877_ADC_REG_MODES			0x08
+#define AN877_ADC_REG_TEST_IO			0x0D
+#define AN877_ADC_REG_ADC_INPUT			0x0F
+#define AN877_ADC_REG_OFFSET			0x10
+#define AN877_ADC_REG_OUTPUT_MODE		0x14
+#define AN877_ADC_REG_OUTPUT_ADJUST		0x15
+#define AN877_ADC_REG_OUTPUT_PHASE		0x16
+#define AN877_ADC_REG_OUTPUT_DELAY		0x17
+#define AN877_ADC_REG_VREF			0x18
+#define AN877_ADC_REG_ANALOG_INPUT		0x2C
+
+/* AN877_ADC_REG_TEST_IO */
+#define AN877_ADC_TESTMODE_OFF			0x0
+#define AN877_ADC_TESTMODE_MIDSCALE_SHORT	0x1
+#define AN877_ADC_TESTMODE_POS_FULLSCALE	0x2
+#define AN877_ADC_TESTMODE_NEG_FULLSCALE	0x3
+#define AN877_ADC_TESTMODE_ALT_CHECKERBOARD	0x4
+#define AN877_ADC_TESTMODE_PN23_SEQ		0x5
+#define AN877_ADC_TESTMODE_PN9_SEQ		0x6
+#define AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE	0x7
+#define AN877_ADC_TESTMODE_USER			0x8
+#define AN877_ADC_TESTMODE_BIT_TOGGLE		0x9
+#define AN877_ADC_TESTMODE_SYNC			0xA
+#define AN877_ADC_TESTMODE_ONE_BIT_HIGH		0xB
+#define AN877_ADC_TESTMODE_MIXED_BIT_FREQUENCY	0xC
+#define AN877_ADC_TESTMODE_RAMP			0xF
+
+/* AN877_ADC_REG_TRANSFER */
+#define AN877_ADC_TRANSFER_SYNC			0x1
+
+/* AN877_ADC_REG_OUTPUT_MODE */
+#define AN877_ADC_OUTPUT_MODE_OFFSET_BINARY	0x0
+#define AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT	0x1
+#define AN877_ADC_OUTPUT_MODE_GRAY_CODE		0x2
+
+/* AN877_ADC_REG_OUTPUT_PHASE */
+#define AN877_ADC_OUTPUT_EVEN_ODD_MODE_EN	0x20
+#define AN877_ADC_INVERT_DCO_CLK		0x80
+
+/* AN877_ADC_REG_OUTPUT_DELAY */
+#define AN877_ADC_DCO_DELAY_ENABLE		0x80
+
+/*
+ * Analog Devices AD9467 16-Bit, 200/250 MSPS ADC
+ */
+
+#define CHIPID_AD9467			0x50
+#define AD9467_DEF_OUTPUT_MODE		0x08
+#define AD9467_REG_VREF_MASK		0x0F
+
+enum {
+	ID_AD9467,
+};
+
+struct ad9467_state {
+	struct spi_device		*spi;
+	struct clk			*clk;
+	unsigned int			output_mode;
+
+	struct gpio_desc		*pwrdown_gpio;
+	struct gpio_desc		*reset_gpio;
+};
+
+static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
+{
+	unsigned char tbuf[2], rbuf[1];
+	int ret;
+
+	tbuf[0] = 0x80 | (reg >> 8);
+	tbuf[1] = reg & 0xFF;
+
+	ret = spi_write_then_read(spi,
+				  tbuf, ARRAY_SIZE(tbuf),
+				  rbuf, ARRAY_SIZE(rbuf));
+
+	if (ret < 0)
+		return ret;
+
+	return rbuf[0];
+}
+
+static int ad9467_spi_write(struct spi_device *spi, unsigned int reg,
+			    unsigned int val)
+{
+	unsigned char buf[3];
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xFF;
+	buf[2] = val;
+
+	return spi_write(spi, buf, ARRAY_SIZE(buf));
+}
+
+static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg,
+			     unsigned int writeval, unsigned int *readval)
+{
+	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+	struct spi_device *spi = st->spi;
+	int ret;
+
+	if (readval == NULL) {
+		ret = ad9467_spi_write(spi, reg, writeval);
+		ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
+				 AN877_ADC_TRANSFER_SYNC);
+		return ret;
+	}
+
+	ret = ad9467_spi_read(spi, reg);
+	if (ret < 0)
+		return ret;
+	*readval = ret;
+
+	return 0;
+}
+
+static const unsigned int ad9467_scale_table[][2] = {
+	{2000, 0}, {2100, 6}, {2200, 7},
+	{2300, 8}, {2400, 9}, {2500, 10},
+};
+
+static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index,
+			       unsigned int *val, unsigned int *val2)
+{
+	const struct adi_axi_adc_chip_info *info = conv->chip_info;
+	const struct iio_chan_spec *chan = &info->channels[0];
+	unsigned int tmp;
+
+	tmp = (info->scale_table[index][0] * 1000000ULL) >>
+			chan->scan_type.realbits;
+	*val = tmp / 1000000;
+	*val2 = tmp % 1000000;
+}
+
+#define AD9467_CHAN(_chan, _si, _bits, _sign)				\
+{									\
+	.type = IIO_VOLTAGE,						\
+	.indexed = 1,							\
+	.channel = _chan,						\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),				\
+	.scan_index = _si,						\
+	.scan_type = {							\
+		.sign = _sign,						\
+		.realbits = _bits,					\
+		.storagebits = 16,					\
+	},								\
+}
+
+static const struct iio_chan_spec ad9467_channels[] = {
+	AD9467_CHAN(0, 0, 16, 'S'),
+};
+
+static const struct adi_axi_adc_chip_info ad9467_chip_tbl[] = {
+	[ID_AD9467] = {
+		.id = CHIPID_AD9467,
+		.max_rate = 250000000UL,
+		.scale_table = ad9467_scale_table,
+		.num_scales = ARRAY_SIZE(ad9467_scale_table),
+		.channels = ad9467_channels,
+		.num_channels = ARRAY_SIZE(ad9467_channels),
+	},
+};
+
+static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2)
+{
+	const struct adi_axi_adc_chip_info *info = conv->chip_info;
+	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+	unsigned int i, vref_val, vref_mask;
+
+	vref_val = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF);
+
+	switch (info->id) {
+	case CHIPID_AD9467:
+		vref_mask = AD9467_REG_VREF_MASK;
+		break;
+	default:
+		vref_mask = 0xFFFF;
+		break;
+	}
+
+	vref_val &= vref_mask;
+
+	for (i = 0; i < info->num_scales; i++) {
+		if (vref_val == info->scale_table[i][1])
+			break;
+	}
+
+	if (i == info->num_scales)
+		return -ERANGE;
+
+	__ad9467_get_scale(conv, i, val, val2);
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
+{
+	const struct adi_axi_adc_chip_info *info = conv->chip_info;
+	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+	unsigned int scale_val[2];
+	unsigned int i;
+
+	if (val != 0)
+		return -EINVAL;
+
+	for (i = 0; i < info->num_scales; i++) {
+		__ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]);
+		if (scale_val[0] != val || scale_val[1] != val2)
+			continue;
+
+		ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
+				 info->scale_table[i][1]);
+		ad9467_spi_write(st->spi, AN877_ADC_REG_TRANSFER,
+				 AN877_ADC_TRANSFER_SYNC);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int ad9467_read_raw(struct adi_axi_adc_conv *conv,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long m)
+{
+	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+
+	switch (m) {
+	case IIO_CHAN_INFO_SCALE:
+		return ad9467_get_scale(conv, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = clk_get_rate(st->clk);
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad9467_write_raw(struct adi_axi_adc_conv *conv,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	const struct adi_axi_adc_chip_info *info = conv->chip_info;
+	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+	long r_clk;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return ad9467_set_scale(conv, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		r_clk = clk_round_rate(st->clk, val);
+		if (r_clk < 0 || r_clk > info->max_rate) {
+			dev_warn(&st->spi->dev,
+				 "Error setting ADC sample rate %ld", r_clk);
+			return -EINVAL;
+		}
+
+		return clk_set_rate(st->clk, r_clk);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
+{
+	int ret;
+
+	ret = ad9467_spi_write(spi, AN877_ADC_REG_OUTPUT_MODE, mode);
+	if (ret < 0)
+		return ret;
+
+	return ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
+				AN877_ADC_TRANSFER_SYNC);
+}
+
+static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
+{
+	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+
+	return ad9467_outputmode_set(st->spi, st->output_mode);
+}
+
+static int ad9467_setup(struct ad9467_state *st, unsigned int chip_id)
+{
+	switch (chip_id) {
+	case CHIPID_AD9467:
+		st->output_mode = AD9467_DEF_OUTPUT_MODE |
+				  AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void ad9467_clk_disable(void *data)
+{
+	struct ad9467_state *st = data;
+
+	clk_disable_unprepare(st->clk);
+}
+
+static int ad9467_probe(struct spi_device *spi)
+{
+	const struct adi_axi_adc_chip_info *info;
+	struct adi_axi_adc_conv *conv;
+	struct ad9467_state *st;
+	unsigned int id;
+	int ret;
+
+	info = of_device_get_match_data(&spi->dev);
+	if (!info)
+		return -ENODEV;
+
+	conv = devm_adi_axi_adc_conv_register(&spi->dev, sizeof(*st));
+	if (IS_ERR(conv))
+		return PTR_ERR(conv);
+
+	st = adi_axi_adc_conv_priv(conv);
+	st->spi = spi;
+
+	st->clk = devm_clk_get(&spi->dev, "adc-clk");
+	if (IS_ERR(st->clk))
+		return PTR_ERR(st->clk);
+
+	ret = clk_prepare_enable(st->clk);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st);
+	if (ret)
+		return ret;
+
+	st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
+						   GPIOD_OUT_LOW);
+	if (IS_ERR(st->pwrdown_gpio))
+		return PTR_ERR(st->pwrdown_gpio);
+
+	st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+						 GPIOD_OUT_LOW);
+	if (IS_ERR(st->reset_gpio))
+		return PTR_ERR(st->reset_gpio);
+
+	if (st->reset_gpio) {
+		udelay(1);
+		ret = gpiod_direction_output(st->reset_gpio, 1);
+		if (ret)
+			return ret;
+		mdelay(10);
+	}
+
+	spi_set_drvdata(spi, st);
+
+	conv->chip_info = info;
+
+	id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID);
+	if (id != conv->chip_info->id) {
+		dev_err(&spi->dev, "Unrecognized CHIP_ID 0x%X\n", id);
+		return -ENODEV;
+	}
+
+	conv->reg_access = ad9467_reg_access;
+	conv->write_raw = ad9467_write_raw;
+	conv->read_raw = ad9467_read_raw;
+	conv->preenable_setup = ad9467_preenable_setup;
+
+	return ad9467_setup(st, id);
+}
+
+static const struct of_device_id ad9467_of_match[] = {
+	{ .compatible = "adi,ad9467", .data = &ad9467_chip_tbl[ID_AD9467], },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ad9467_of_match);
+
+static struct spi_driver ad9467_driver = {
+	.driver = {
+		.name = "ad9467",
+		.of_match_table = ad9467_of_match,
+	},
+	.probe = ad9467_probe,
+};
+module_spi_driver(ad9467_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
new file mode 100644
index 000000000000..c24c8da99eb4
--- /dev/null
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices Generic AXI ADC IP core
+ * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/buffer-dmaengine.h>
+
+#include <linux/fpga/adi-axi-common.h>
+#include <linux/iio/adc/adi-axi-adc.h>
+
+/**
+ * Register definitions:
+ *   https://wiki.analog.com/resources/fpga/docs/axi_adc_ip#register_map
+ */
+
+/* ADC controls */
+
+#define ADI_AXI_REG_RSTN			0x0040
+#define   ADI_AXI_REG_RSTN_CE_N			BIT(2)
+#define   ADI_AXI_REG_RSTN_MMCM_RSTN		BIT(1)
+#define   ADI_AXI_REG_RSTN_RSTN			BIT(0)
+
+/* ADC Channel controls */
+
+#define ADI_AXI_REG_CHAN_CTRL(c)		(0x0400 + (c) * 0x40)
+#define   ADI_AXI_REG_CHAN_CTRL_LB_OWR		BIT(11)
+#define   ADI_AXI_REG_CHAN_CTRL_PN_SEL_OWR	BIT(10)
+#define   ADI_AXI_REG_CHAN_CTRL_IQCOR_EN	BIT(9)
+#define   ADI_AXI_REG_CHAN_CTRL_DCFILT_EN	BIT(8)
+#define   ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT	BIT(6)
+#define   ADI_AXI_REG_CHAN_CTRL_FMT_TYPE	BIT(5)
+#define   ADI_AXI_REG_CHAN_CTRL_FMT_EN		BIT(4)
+#define   ADI_AXI_REG_CHAN_CTRL_PN_TYPE_OWR	BIT(1)
+#define   ADI_AXI_REG_CHAN_CTRL_ENABLE		BIT(0)
+
+#define ADI_AXI_REG_CHAN_CTRL_DEFAULTS		\
+	(ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT |	\
+	 ADI_AXI_REG_CHAN_CTRL_FMT_EN |		\
+	 ADI_AXI_REG_CHAN_CTRL_ENABLE)
+
+struct adi_axi_adc_core_info {
+	unsigned int				version;
+};
+
+struct adi_axi_adc_state {
+	struct mutex				lock;
+
+	struct adi_axi_adc_client		*client;
+	void __iomem				*regs;
+};
+
+struct adi_axi_adc_client {
+	struct list_head			entry;
+	struct adi_axi_adc_conv			conv;
+	struct adi_axi_adc_state		*state;
+	struct device				*dev;
+	const struct adi_axi_adc_core_info	*info;
+};
+
+static LIST_HEAD(registered_clients);
+static DEFINE_MUTEX(registered_clients_lock);
+
+static struct adi_axi_adc_client *conv_to_client(struct adi_axi_adc_conv *conv)
+{
+	return container_of(conv, struct adi_axi_adc_client, conv);
+}
+
+void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv)
+{
+	struct adi_axi_adc_client *cl = conv_to_client(conv);
+
+	return (char *)cl + ALIGN(sizeof(struct adi_axi_adc_client), IIO_ALIGN);
+}
+EXPORT_SYMBOL_GPL(adi_axi_adc_conv_priv);
+
+static void adi_axi_adc_write(struct adi_axi_adc_state *st,
+			      unsigned int reg,
+			      unsigned int val)
+{
+	iowrite32(val, st->regs + reg);
+}
+
+static unsigned int adi_axi_adc_read(struct adi_axi_adc_state *st,
+				     unsigned int reg)
+{
+	return ioread32(st->regs + reg);
+}
+
+static int adi_axi_adc_config_dma_buffer(struct device *dev,
+					 struct iio_dev *indio_dev)
+{
+	struct iio_buffer *buffer;
+	const char *dma_name;
+
+	if (!device_property_present(dev, "dmas"))
+		return 0;
+
+	if (device_property_read_string(dev, "dma-names", &dma_name))
+		dma_name = "rx";
+
+	buffer = devm_iio_dmaengine_buffer_alloc(indio_dev->dev.parent,
+						 dma_name);
+	if (IS_ERR(buffer))
+		return PTR_ERR(buffer);
+
+	indio_dev->modes |= INDIO_BUFFER_HARDWARE;
+	iio_device_attach_buffer(indio_dev, buffer);
+
+	return 0;
+}
+
+static int adi_axi_adc_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct adi_axi_adc_state *st = iio_priv(indio_dev);
+	struct adi_axi_adc_conv *conv = &st->client->conv;
+
+	if (!conv->read_raw)
+		return -EOPNOTSUPP;
+
+	return conv->read_raw(conv, chan, val, val2, mask);
+}
+
+static int adi_axi_adc_write_raw(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int val, int val2, long mask)
+{
+	struct adi_axi_adc_state *st = iio_priv(indio_dev);
+	struct adi_axi_adc_conv *conv = &st->client->conv;
+
+	if (!conv->write_raw)
+		return -EOPNOTSUPP;
+
+	return conv->write_raw(conv, chan, val, val2, mask);
+}
+
+static int adi_axi_adc_update_scan_mode(struct iio_dev *indio_dev,
+					const unsigned long *scan_mask)
+{
+	struct adi_axi_adc_state *st = iio_priv(indio_dev);
+	struct adi_axi_adc_conv *conv = &st->client->conv;
+	unsigned int i, ctrl;
+
+	for (i = 0; i < conv->chip_info->num_channels; i++) {
+		ctrl = adi_axi_adc_read(st, ADI_AXI_REG_CHAN_CTRL(i));
+
+		if (test_bit(i, scan_mask))
+			ctrl |= ADI_AXI_REG_CHAN_CTRL_ENABLE;
+		else
+			ctrl &= ~ADI_AXI_REG_CHAN_CTRL_ENABLE;
+
+		adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i), ctrl);
+	}
+
+	return 0;
+}
+
+static struct adi_axi_adc_conv *adi_axi_adc_conv_register(struct device *dev,
+							  size_t sizeof_priv)
+{
+	struct adi_axi_adc_client *cl;
+	size_t alloc_size;
+
+	alloc_size = ALIGN(sizeof(struct adi_axi_adc_client), IIO_ALIGN);
+	if (sizeof_priv)
+		alloc_size += ALIGN(sizeof_priv, IIO_ALIGN);
+
+	cl = kzalloc(alloc_size, GFP_KERNEL);
+	if (!cl)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_lock(&registered_clients_lock);
+
+	cl->dev = get_device(dev);
+
+	list_add_tail(&cl->entry, &registered_clients);
+
+	mutex_unlock(&registered_clients_lock);
+
+	return &cl->conv;
+}
+
+static void adi_axi_adc_conv_unregister(struct adi_axi_adc_conv *conv)
+{
+	struct adi_axi_adc_client *cl = conv_to_client(conv);
+
+	mutex_lock(&registered_clients_lock);
+
+	list_del(&cl->entry);
+	put_device(cl->dev);
+
+	mutex_unlock(&registered_clients_lock);
+
+	kfree(cl);
+}
+
+static void devm_adi_axi_adc_conv_release(struct device *dev, void *res)
+{
+	adi_axi_adc_conv_unregister(*(struct adi_axi_adc_conv **)res);
+}
+
+struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev,
+							size_t sizeof_priv)
+{
+	struct adi_axi_adc_conv **ptr, *conv;
+
+	ptr = devres_alloc(devm_adi_axi_adc_conv_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	conv = adi_axi_adc_conv_register(dev, sizeof_priv);
+	if (IS_ERR(conv)) {
+		devres_free(ptr);
+		return ERR_CAST(conv);
+	}
+
+	*ptr = conv;
+	devres_add(dev, ptr);
+
+	return conv;
+}
+EXPORT_SYMBOL_GPL(devm_adi_axi_adc_conv_register);
+
+static ssize_t in_voltage_scale_available_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct adi_axi_adc_state *st = iio_priv(indio_dev);
+	struct adi_axi_adc_conv *conv = &st->client->conv;
+	size_t len = 0;
+	int i;
+
+	for (i = 0; i < conv->chip_info->num_scales; i++) {
+		const unsigned int *s = conv->chip_info->scale_table[i];
+
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+				 "%u.%06u ", s[0], s[1]);
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
+
+enum {
+	ADI_AXI_ATTR_SCALE_AVAIL,
+};
+
+#define ADI_AXI_ATTR(_en_, _file_)			\
+	[ADI_AXI_ATTR_##_en_] = &iio_dev_attr_##_file_.dev_attr.attr
+
+static struct attribute *adi_axi_adc_attributes[] = {
+	ADI_AXI_ATTR(SCALE_AVAIL, in_voltage_scale_available),
+	NULL
+};
+
+static umode_t axi_adc_attr_is_visible(struct kobject *kobj,
+				       struct attribute *attr, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct adi_axi_adc_state *st = iio_priv(indio_dev);
+	struct adi_axi_adc_conv *conv = &st->client->conv;
+
+	switch (n) {
+	case ADI_AXI_ATTR_SCALE_AVAIL:
+		if (!conv->chip_info->num_scales)
+			return 0;
+		return attr->mode;
+	default:
+		return attr->mode;
+	}
+}
+
+static const struct attribute_group adi_axi_adc_attribute_group = {
+	.attrs = adi_axi_adc_attributes,
+	.is_visible = axi_adc_attr_is_visible,
+};
+
+static const struct iio_info adi_axi_adc_info = {
+	.read_raw = &adi_axi_adc_read_raw,
+	.write_raw = &adi_axi_adc_write_raw,
+	.attrs = &adi_axi_adc_attribute_group,
+	.update_scan_mode = &adi_axi_adc_update_scan_mode,
+};
+
+static const struct adi_axi_adc_core_info adi_axi_adc_10_0_a_info = {
+	.version = ADI_AXI_PCORE_VER(10, 0, 'a'),
+};
+
+static struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev)
+{
+	const struct adi_axi_adc_core_info *info;
+	struct adi_axi_adc_client *cl;
+	struct device_node *cln;
+
+	info = of_device_get_match_data(dev);
+	if (!info)
+		return ERR_PTR(-ENODEV);
+
+	cln = of_parse_phandle(dev->of_node, "adi,adc-dev", 0);
+	if (!cln) {
+		dev_err(dev, "No 'adi,adc-dev' node defined\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	mutex_lock(&registered_clients_lock);
+
+	list_for_each_entry(cl, &registered_clients, entry) {
+		if (!cl->dev)
+			continue;
+
+		if (cl->dev->of_node != cln)
+			continue;
+
+		if (!try_module_get(dev->driver->owner)) {
+			mutex_unlock(&registered_clients_lock);
+			return ERR_PTR(-ENODEV);
+		}
+
+		get_device(dev);
+		cl->info = info;
+		mutex_unlock(&registered_clients_lock);
+		return cl;
+	}
+
+	mutex_unlock(&registered_clients_lock);
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+
+static int adi_axi_adc_setup_channels(struct device *dev,
+				      struct adi_axi_adc_state *st)
+{
+	struct adi_axi_adc_conv *conv = &st->client->conv;
+	int i, ret;
+
+	if (conv->preenable_setup) {
+		ret = conv->preenable_setup(conv);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < conv->chip_info->num_channels; i++) {
+		adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i),
+				  ADI_AXI_REG_CHAN_CTRL_DEFAULTS);
+	}
+
+	return 0;
+}
+
+static void axi_adc_reset(struct adi_axi_adc_state *st)
+{
+	adi_axi_adc_write(st, ADI_AXI_REG_RSTN, 0);
+	mdelay(10);
+	adi_axi_adc_write(st, ADI_AXI_REG_RSTN, ADI_AXI_REG_RSTN_MMCM_RSTN);
+	mdelay(10);
+	adi_axi_adc_write(st, ADI_AXI_REG_RSTN,
+			  ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN);
+}
+
+static void adi_axi_adc_cleanup(void *data)
+{
+	struct adi_axi_adc_client *cl = data;
+
+	put_device(cl->dev);
+	module_put(cl->dev->driver->owner);
+}
+
+static int adi_axi_adc_probe(struct platform_device *pdev)
+{
+	struct adi_axi_adc_conv *conv;
+	struct iio_dev *indio_dev;
+	struct adi_axi_adc_client *cl;
+	struct adi_axi_adc_state *st;
+	unsigned int ver;
+	int ret;
+
+	cl = adi_axi_adc_attach_client(&pdev->dev);
+	if (IS_ERR(cl))
+		return PTR_ERR(cl);
+
+	ret = devm_add_action_or_reset(&pdev->dev, adi_axi_adc_cleanup, cl);
+	if (ret)
+		return ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	st->client = cl;
+	cl->state = st;
+	mutex_init(&st->lock);
+
+	st->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(st->regs))
+		return PTR_ERR(st->regs);
+
+	conv = &st->client->conv;
+
+	axi_adc_reset(st);
+
+	ver = adi_axi_adc_read(st, ADI_AXI_REG_VERSION);
+
+	if (cl->info->version > ver) {
+		dev_err(&pdev->dev,
+			"IP core version is too old. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
+			ADI_AXI_PCORE_VER_MAJOR(cl->info->version),
+			ADI_AXI_PCORE_VER_MINOR(cl->info->version),
+			ADI_AXI_PCORE_VER_PATCH(cl->info->version),
+			ADI_AXI_PCORE_VER_MAJOR(ver),
+			ADI_AXI_PCORE_VER_MINOR(ver),
+			ADI_AXI_PCORE_VER_PATCH(ver));
+		return -ENODEV;
+	}
+
+	indio_dev->info = &adi_axi_adc_info;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = "adi-axi-adc";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->num_channels = conv->chip_info->num_channels;
+	indio_dev->channels = conv->chip_info->channels;
+
+	ret = adi_axi_adc_config_dma_buffer(&pdev->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = adi_axi_adc_setup_channels(&pdev->dev, st);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(&pdev->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	dev_info(&pdev->dev, "AXI ADC IP core (%d.%.2d.%c) probed\n",
+		 ADI_AXI_PCORE_VER_MAJOR(ver),
+		 ADI_AXI_PCORE_VER_MINOR(ver),
+		 ADI_AXI_PCORE_VER_PATCH(ver));
+
+	return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id adi_axi_adc_of_match[] = {
+	{ .compatible = "adi,axi-adc-10.0.a", .data = &adi_axi_adc_10_0_a_info },
+	{ /* end of list */ }
+};
+MODULE_DEVICE_TABLE(of, adi_axi_adc_of_match);
+
+static struct platform_driver adi_axi_adc_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = adi_axi_adc_of_match,
+	},
+	.probe = adi_axi_adc_probe,
+};
+module_platform_driver(adi_axi_adc_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices Generic AXI ADC IP core driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index abe99856c823..0368b6dc6d60 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -1152,7 +1152,6 @@ static int at91_adc_probe(struct platform_device *pdev)
 	int ret;
 	struct iio_dev *idev;
 	struct at91_adc_state *st;
-	struct resource *res;
 	u32 reg;
 
 	idev = devm_iio_device_alloc(&pdev->dev, sizeof(struct at91_adc_state));
@@ -1182,9 +1181,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	if (st->irq < 0)
 		return -ENODEV;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	st->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	st->reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(st->reg_base))
 		return PTR_ERR(st->reg_base);
 
diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index fa71489195c6..b0a4dc88ba9b 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -294,7 +294,6 @@ static int mx25_gcq_probe(struct platform_device *pdev)
 	struct mx25_gcq_priv *priv;
 	struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	void __iomem *mem;
 	int ret;
 	int i;
@@ -305,8 +304,7 @@ static int mx25_gcq_probe(struct platform_device *pdev)
 
 	priv = iio_priv(indio_dev);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mem = devm_ioremap_resource(dev, res);
+	mem = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(mem))
 		return PTR_ERR(mem);
 
diff --git a/drivers/iio/adc/intel_mrfld_adc.c b/drivers/iio/adc/intel_mrfld_adc.c
index c35a1beb817c..a6d2e1f27e76 100644
--- a/drivers/iio/adc/intel_mrfld_adc.c
+++ b/drivers/iio/adc/intel_mrfld_adc.c
@@ -75,7 +75,7 @@ static int mrfld_adc_single_conv(struct iio_dev *indio_dev,
 	struct regmap *regmap = adc->regmap;
 	unsigned int req;
 	long timeout;
-	u8 buf[2];
+	__be16 value;
 	int ret;
 
 	reinit_completion(&adc->completion);
@@ -105,11 +105,11 @@ static int mrfld_adc_single_conv(struct iio_dev *indio_dev,
 		goto done;
 	}
 
-	ret = regmap_bulk_read(regmap, chan->address, buf, 2);
+	ret = regmap_bulk_read(regmap, chan->address, &value, sizeof(value));
 	if (ret)
 		goto done;
 
-	*result = get_unaligned_be16(buf);
+	*result = be16_to_cpu(value);
 	ret = IIO_VAL_INT;
 
 done:
diff --git a/drivers/iio/adc/max1241.c b/drivers/iio/adc/max1241.c
new file mode 100644
index 000000000000..541939c7abca
--- /dev/null
+++ b/drivers/iio/adc/max1241.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MAX1241 low-power, 12-bit serial ADC
+ *
+ * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define MAX1241_VAL_MASK GENMASK(11, 0)
+#define MAX1241_SHUTDOWN_DELAY_USEC 4
+
+enum max1241_id {
+	max1241,
+};
+
+struct max1241 {
+	struct spi_device *spi;
+	struct mutex lock;
+	struct regulator *vdd;
+	struct regulator *vref;
+	struct gpio_desc *shutdown;
+
+	__be16 data ____cacheline_aligned;
+};
+
+static const struct iio_chan_spec max1241_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static int max1241_read(struct max1241 *adc)
+{
+	struct spi_transfer xfers[] = {
+		/*
+		 * Begin conversion by bringing /CS low for at least
+		 * tconv us.
+		 */
+		{
+			.len = 0,
+			.delay.value = 8,
+			.delay.unit = SPI_DELAY_UNIT_USECS,
+		},
+		/*
+		 * Then read two bytes of data in our RX buffer.
+		 */
+		{
+			.rx_buf = &adc->data,
+			.len = 2,
+		},
+	};
+
+	return spi_sync_transfer(adc->spi, xfers, ARRAY_SIZE(xfers));
+}
+
+static int max1241_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	int ret, vref_uV;
+	struct max1241 *adc = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+
+		if (adc->shutdown) {
+			gpiod_set_value(adc->shutdown, 0);
+			udelay(MAX1241_SHUTDOWN_DELAY_USEC);
+			ret = max1241_read(adc);
+			gpiod_set_value(adc->shutdown, 1);
+		} else
+			ret = max1241_read(adc);
+
+		if (ret) {
+			mutex_unlock(&adc->lock);
+			return ret;
+		}
+
+		*val = (be16_to_cpu(adc->data) >> 3) & MAX1241_VAL_MASK;
+
+		mutex_unlock(&adc->lock);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		vref_uV = regulator_get_voltage(adc->vref);
+
+		if (vref_uV < 0)
+			return vref_uV;
+
+		*val = vref_uV / 1000;
+		*val2 = 12;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info max1241_info = {
+	.read_raw = max1241_read_raw,
+};
+
+static void max1241_disable_vdd_action(void *data)
+{
+	struct max1241 *adc = data;
+	struct device *dev = &adc->spi->dev;
+	int err;
+
+	err = regulator_disable(adc->vdd);
+	if (err)
+		dev_err(dev, "could not disable vdd regulator.\n");
+}
+
+static void max1241_disable_vref_action(void *data)
+{
+	struct max1241 *adc = data;
+	struct device *dev = &adc->spi->dev;
+	int err;
+
+	err = regulator_disable(adc->vref);
+	if (err)
+		dev_err(dev, "could not disable vref regulator.\n");
+}
+
+static int max1241_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct iio_dev *indio_dev;
+	struct max1241 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	spi_set_drvdata(spi, indio_dev);
+
+	adc->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(adc->vdd)) {
+		dev_err(dev, "failed to get vdd regulator\n");
+		return PTR_ERR(adc->vdd);
+	}
+
+	ret = regulator_enable(adc->vdd);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, max1241_disable_vdd_action, adc);
+	if (ret) {
+		dev_err(dev, "could not set up vdd regulator cleanup action\n");
+		return ret;
+	}
+
+	adc->vref = devm_regulator_get(dev, "vref");
+	if (IS_ERR(adc->vref)) {
+		dev_err(dev, "failed to get vref regulator\n");
+		return PTR_ERR(adc->vref);
+	}
+
+	ret = regulator_enable(adc->vref);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, max1241_disable_vref_action, adc);
+	if (ret) {
+		dev_err(dev, "could not set up vref regulator cleanup action\n");
+		return ret;
+	}
+
+	adc->shutdown = devm_gpiod_get_optional(dev, "shutdown",
+						GPIOD_OUT_HIGH);
+	if (IS_ERR(adc->shutdown))
+		return PTR_ERR(adc->shutdown);
+
+	if (adc->shutdown)
+		dev_dbg(dev, "shutdown pin passed, low-power mode enabled");
+	else
+		dev_dbg(dev, "no shutdown pin passed, low-power mode disabled");
+
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &max1241_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = max1241_channels;
+	indio_dev->num_channels = ARRAY_SIZE(max1241_channels);
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct spi_device_id max1241_id[] = {
+	{ "max1241", max1241 },
+	{}
+};
+
+static const struct of_device_id max1241_dt_ids[] = {
+	{ .compatible = "maxim,max1241" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, max1241_dt_ids);
+
+static struct spi_driver max1241_spi_driver = {
+	.driver = {
+		.name = "max1241",
+		.of_match_table = max1241_dt_ids,
+	},
+	.probe = max1241_probe,
+	.id_table = max1241_id,
+};
+module_spi_driver(max1241_spi_driver);
+
+MODULE_AUTHOR("Alexandru Lazar <alazar@startmail.com>");
+MODULE_DESCRIPTION("MAX1241 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 5c2cc61b666e..9d92017c79b2 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -150,6 +150,7 @@ struct max1363_chip_info {
  * @current_mode:	the scan mode of this chip
  * @requestedmask:	a valid requested set of channels
  * @reg:		supply regulator
+ * @lock		lock to ensure state is consistent
  * @monitor_on:		whether monitor mode is enabled
  * @monitor_speed:	parameter corresponding to device monitor speed setting
  * @mask_high:		bitmask for enabled high thresholds
@@ -169,6 +170,7 @@ struct max1363_state {
 	const struct max1363_mode	*current_mode;
 	u32				requestedmask;
 	struct regulator		*reg;
+	struct mutex			lock;
 
 	/* Using monitor modes and buffer at the same time is
 	   currently not supported */
@@ -364,7 +366,11 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
 	struct max1363_state *st = iio_priv(indio_dev);
 	struct i2c_client *client = st->client;
 
-	mutex_lock(&indio_dev->mlock);
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+	mutex_lock(&st->lock);
+
 	/*
 	 * If monitor mode is enabled, the method for reading a single
 	 * channel will have to be rather different and has not yet
@@ -372,7 +378,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
 	 *
 	 * Also, cannot read directly if buffered capture enabled.
 	 */
-	if (st->monitor_on || iio_buffer_enabled(indio_dev)) {
+	if (st->monitor_on) {
 		ret = -EBUSY;
 		goto error_ret;
 	}
@@ -404,8 +410,10 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
 		data = rxbuf[0];
 	}
 	*val = data;
+
 error_ret:
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
+	iio_device_release_direct_mode(indio_dev);
 	return ret;
 
 }
@@ -705,9 +713,9 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,
 	if (!found)
 		return -EINVAL;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 	st->monitor_speed = i;
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 
 	return 0;
 }
@@ -810,12 +818,12 @@ static int max1363_read_event_config(struct iio_dev *indio_dev,
 	int val;
 	int number = chan->channel;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 	if (dir == IIO_EV_DIR_FALLING)
 		val = (1 << number) & st->mask_low;
 	else
 		val = (1 << number) & st->mask_high;
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 
 	return val;
 }
@@ -962,7 +970,11 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,
 	u16 unifiedmask;
 	int number = chan->channel;
 
-	mutex_lock(&indio_dev->mlock);
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+	mutex_lock(&st->lock);
+
 	unifiedmask = st->mask_low | st->mask_high;
 	if (dir == IIO_EV_DIR_FALLING) {
 
@@ -989,7 +1001,8 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,
 
 	max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low));
 error_ret:
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
+	iio_device_release_direct_mode(indio_dev);
 
 	return ret;
 }
@@ -1587,6 +1600,7 @@ static int max1363_probe(struct i2c_client *client,
 
 	st = iio_priv(indio_dev);
 
+	mutex_init(&st->lock);
 	st->reg = devm_regulator_get(&client->dev, "vcc");
 	if (IS_ERR(st->reg)) {
 		ret = PTR_ERR(st->reg);
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 176e1cb4abb1..0f2c1738a90d 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -496,7 +496,6 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
 				struct iio_dev *indio_dev)
 {
 	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
-	struct resource *mem;
 	void __iomem *base;
 	int ret;
 
@@ -508,8 +507,7 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
 	indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
 	indio_dev->channels = sun8i_a33_gpadc_channels;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, mem);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 6fd06e4eff73..d7fecab9252e 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -3,7 +3,7 @@
  * Xilinx XADC driver
  *
  * Copyright 2013-2014 Analog Devices Inc.
- *  Author: Lars-Peter Clauen <lars@metafoo.de>
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
  *
  * Documentation for the parts can be found at:
  *  - XADC hardmacro: Xilinx UG480
@@ -663,7 +663,7 @@ static int xadc_trigger_set_state(struct iio_trigger *trigger, bool state)
 	mutex_lock(&xadc->mutex);
 
 	if (state) {
-		/* Only one of the two triggers can be active at the a time. */
+		/* Only one of the two triggers can be active at a time. */
 		if (xadc->trigger != NULL) {
 			ret = -EBUSY;
 			goto err_out;
diff --git a/drivers/iio/adc/xilinx-xadc-events.c b/drivers/iio/adc/xilinx-xadc-events.c
index dbfd5da290a4..2357f585720a 100644
--- a/drivers/iio/adc/xilinx-xadc-events.c
+++ b/drivers/iio/adc/xilinx-xadc-events.c
@@ -3,7 +3,7 @@
  * Xilinx XADC driver
  *
  * Copyright 2013 Analog Devices Inc.
- *  Author: Lars-Peter Clauen <lars@metafoo.de>
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
  */
 
 #include <linux/iio/events.h>
diff --git a/drivers/iio/adc/xilinx-xadc.h b/drivers/iio/adc/xilinx-xadc.h
index 4017f18b0a4f..25abed9c0285 100644
--- a/drivers/iio/adc/xilinx-xadc.h
+++ b/drivers/iio/adc/xilinx-xadc.h
@@ -3,7 +3,7 @@
  * Xilinx XADC driver
  *
  * Copyright 2013 Analog Devices Inc.
- *  Author: Lars-Peter Clauen <lars@metafoo.de>
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
  */
 
 #ifndef __IIO_XILINX_XADC__
diff --git a/drivers/iio/buffer/industrialio-buffer-dma.c b/drivers/iio/buffer/industrialio-buffer-dma.c
index a74bd9c0587c..d348af8b9705 100644
--- a/drivers/iio/buffer/industrialio-buffer-dma.c
+++ b/drivers/iio/buffer/industrialio-buffer-dma.c
@@ -12,7 +12,6 @@
 #include <linux/mutex.h>
 #include <linux/sched.h>
 #include <linux/poll.h>
-#include <linux/iio/buffer.h>
 #include <linux/iio/buffer_impl.h>
 #include <linux/iio/buffer-dma.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
index b129693af0fd..6dedf12b69a4 100644
--- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c
+++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
@@ -134,7 +134,7 @@ static ssize_t iio_dmaengine_buffer_get_length_align(struct device *dev,
 	struct dmaengine_buffer *dmaengine_buffer =
 		iio_buffer_to_dmaengine_buffer(indio_dev->buffer);
 
-	return sprintf(buf, "%u\n", dmaengine_buffer->align);
+	return sprintf(buf, "%zu\n", dmaengine_buffer->align);
 }
 
 static IIO_DEVICE_ATTR(length_align_bytes, 0444,
@@ -229,6 +229,45 @@ void iio_dmaengine_buffer_free(struct iio_buffer *buffer)
 }
 EXPORT_SYMBOL_GPL(iio_dmaengine_buffer_free);
 
+static void __devm_iio_dmaengine_buffer_free(struct device *dev, void *res)
+{
+	iio_dmaengine_buffer_free(*(struct iio_buffer **)res);
+}
+
+/**
+ * devm_iio_dmaengine_buffer_alloc() - Resource-managed iio_dmaengine_buffer_alloc()
+ * @dev: Parent device for the buffer
+ * @channel: DMA channel name, typically "rx".
+ *
+ * This allocates a new IIO buffer which internally uses the DMAengine framework
+ * to perform its transfers. The parent device will be used to request the DMA
+ * channel.
+ *
+ * The buffer will be automatically de-allocated once the device gets destroyed.
+ */
+struct iio_buffer *devm_iio_dmaengine_buffer_alloc(struct device *dev,
+	const char *channel)
+{
+	struct iio_buffer **bufferp, *buffer;
+
+	bufferp = devres_alloc(__devm_iio_dmaengine_buffer_free,
+			       sizeof(*bufferp), GFP_KERNEL);
+	if (!bufferp)
+		return ERR_PTR(-ENOMEM);
+
+	buffer = iio_dmaengine_buffer_alloc(dev, channel);
+	if (IS_ERR(buffer)) {
+		devres_free(bufferp);
+		return buffer;
+	}
+
+	*bufferp = buffer;
+	devres_add(dev, bufferp);
+
+	return buffer;
+}
+EXPORT_SYMBOL_GPL(devm_iio_dmaengine_buffer_alloc);
+
 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
 MODULE_DESCRIPTION("DMA buffer for the IIO framework");
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/buffer/industrialio-hw-consumer.c b/drivers/iio/buffer/industrialio-hw-consumer.c
index 95165697d8ae..f2d27788f666 100644
--- a/drivers/iio/buffer/industrialio-hw-consumer.c
+++ b/drivers/iio/buffer/industrialio-hw-consumer.c
@@ -142,17 +142,6 @@ static void devm_iio_hw_consumer_release(struct device *dev, void *res)
 	iio_hw_consumer_free(*(struct iio_hw_consumer **)res);
 }
 
-static int devm_iio_hw_consumer_match(struct device *dev, void *res, void *data)
-{
-	struct iio_hw_consumer **r = res;
-
-	if (!r || !*r) {
-		WARN_ON(!r || !*r);
-		return 0;
-	}
-	return *r == data;
-}
-
 /**
  * devm_iio_hw_consumer_alloc - Resource-managed iio_hw_consumer_alloc()
  * @dev: Pointer to consumer device.
@@ -160,9 +149,6 @@ static int devm_iio_hw_consumer_match(struct device *dev, void *res, void *data)
  * Managed iio_hw_consumer_alloc. iio_hw_consumer allocated with this function
  * is automatically freed on driver detach.
  *
- * If an iio_hw_consumer allocated with this function needs to be freed
- * separately, devm_iio_hw_consumer_free() must be used.
- *
  * returns pointer to allocated iio_hw_consumer on success, NULL on failure.
  */
 struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev)
@@ -186,23 +172,6 @@ struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_alloc);
 
-/**
- * devm_iio_hw_consumer_free - Resource-managed iio_hw_consumer_free()
- * @dev: Pointer to consumer device.
- * @hwc: iio_hw_consumer to free.
- *
- * Free iio_hw_consumer allocated with devm_iio_hw_consumer_alloc().
- */
-void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc)
-{
-	int rc;
-
-	rc = devres_release(dev, devm_iio_hw_consumer_release,
-			    devm_iio_hw_consumer_match, hwc);
-	WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_free);
-
 /**
  * iio_hw_consumer_enable() - Enable IIO hardware consumer
  * @hwc: iio_hw_consumer to enable.
diff --git a/drivers/iio/buffer/industrialio-triggered-buffer.c b/drivers/iio/buffer/industrialio-triggered-buffer.c
index cb322b2f09cd..e8046c1ecd6b 100644
--- a/drivers/iio/buffer/industrialio-triggered-buffer.c
+++ b/drivers/iio/buffer/industrialio-triggered-buffer.c
@@ -126,17 +126,6 @@ int devm_iio_triggered_buffer_setup(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_iio_triggered_buffer_setup);
 
-void devm_iio_triggered_buffer_cleanup(struct device *dev,
-				       struct iio_dev *indio_dev)
-{
-	int rc;
-
-	rc = devres_release(dev, devm_iio_triggered_buffer_clean,
-			    devm_iio_device_match, indio_dev);
-	WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_triggered_buffer_cleanup);
-
 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
 MODULE_DESCRIPTION("IIO helper functions for setting up triggered buffers");
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/buffer/kfifo_buf.c b/drivers/iio/buffer/kfifo_buf.c
index 3150f8ab984b..1359abed3b31 100644
--- a/drivers/iio/buffer/kfifo_buf.c
+++ b/drivers/iio/buffer/kfifo_buf.c
@@ -179,16 +179,6 @@ static void devm_iio_kfifo_release(struct device *dev, void *res)
 	iio_kfifo_free(*(struct iio_buffer **)res);
 }
 
-static int devm_iio_kfifo_match(struct device *dev, void *res, void *data)
-{
-	struct iio_buffer **r = res;
-
-	if (WARN_ON(!r || !*r))
-		return 0;
-
-	return *r == data;
-}
-
 /**
  * devm_iio_fifo_allocate - Resource-managed iio_kfifo_allocate()
  * @dev:		Device to allocate kfifo buffer for
@@ -216,16 +206,4 @@ struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev)
 }
 EXPORT_SYMBOL(devm_iio_kfifo_allocate);
 
-/**
- * devm_iio_fifo_free - Resource-managed iio_kfifo_free()
- * @dev:		Device the buffer belongs to
- * @r:			The buffer associated with the device
- */
-void devm_iio_kfifo_free(struct device *dev, struct iio_buffer *r)
-{
-	WARN_ON(devres_release(dev, devm_iio_kfifo_release,
-			       devm_iio_kfifo_match, r));
-}
-EXPORT_SYMBOL(devm_iio_kfifo_free);
-
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c
index 82d470561ad3..973cdb4f1e83 100644
--- a/drivers/iio/chemical/atlas-sensor.c
+++ b/drivers/iio/chemical/atlas-sensor.c
@@ -426,8 +426,7 @@ static irqreturn_t atlas_trigger_handler(int irq, void *private)
 	int ret;
 
 	ret = regmap_bulk_read(data->regmap, data->chip->data_reg,
-			      (u8 *) &data->buffer,
-			      sizeof(__be32) * channels);
+			      &data->buffer, sizeof(__be32) * channels);
 
 	if (!ret)
 		iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
@@ -463,7 +462,7 @@ static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val)
 	if (suspended)
 		msleep(data->chip->delay);
 
-	ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val));
+	ret = regmap_bulk_read(data->regmap, reg, val, sizeof(*val));
 
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
@@ -485,7 +484,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 		switch (chan->type) {
 		case IIO_TEMP:
 			ret = regmap_bulk_read(data->regmap, chan->address,
-					      (u8 *) &reg, sizeof(reg));
+					       &reg, sizeof(reg));
 			break;
 		case IIO_PH:
 		case IIO_CONCENTRATION:
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index ccde4c65ff93..13773e01699b 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -114,14 +114,16 @@ static int bme680_read_calib(struct bme680_data *data,
 	__le16 buf;
 
 	/* Temperature related coefficients */
-	ret = regmap_bulk_read(data->regmap, BME680_T1_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_T1_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_T1_LSB_REG\n");
 		return ret;
 	}
 	calib->par_t1 = le16_to_cpu(buf);
 
-	ret = regmap_bulk_read(data->regmap, BME680_T2_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_T2_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_T2_LSB_REG\n");
 		return ret;
@@ -136,14 +138,16 @@ static int bme680_read_calib(struct bme680_data *data,
 	calib->par_t3 = tmp;
 
 	/* Pressure related coefficients */
-	ret = regmap_bulk_read(data->regmap, BME680_P1_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P1_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P1_LSB_REG\n");
 		return ret;
 	}
 	calib->par_p1 = le16_to_cpu(buf);
 
-	ret = regmap_bulk_read(data->regmap, BME680_P2_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P2_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P2_LSB_REG\n");
 		return ret;
@@ -157,14 +161,16 @@ static int bme680_read_calib(struct bme680_data *data,
 	}
 	calib->par_p3 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BME680_P4_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P4_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P4_LSB_REG\n");
 		return ret;
 	}
 	calib->par_p4 = le16_to_cpu(buf);
 
-	ret = regmap_bulk_read(data->regmap, BME680_P5_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P5_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P5_LSB_REG\n");
 		return ret;
@@ -185,14 +191,16 @@ static int bme680_read_calib(struct bme680_data *data,
 	}
 	calib->par_p7 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BME680_P8_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P8_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P8_LSB_REG\n");
 		return ret;
 	}
 	calib->par_p8 = le16_to_cpu(buf);
 
-	ret = regmap_bulk_read(data->regmap, BME680_P9_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P9_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P9_LSB_REG\n");
 		return ret;
@@ -276,8 +284,8 @@ static int bme680_read_calib(struct bme680_data *data,
 	}
 	calib->par_gh1 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BME680_GH2_LSB_REG, (u8 *) &buf,
-			       2);
+	ret = regmap_bulk_read(data->regmap, BME680_GH2_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_GH2_LSB_REG\n");
 		return ret;
@@ -615,7 +623,7 @@ static int bme680_read_temp(struct bme680_data *data, int *val)
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB,
-			       (u8 *) &tmp, 3);
+			       &tmp, 3);
 	if (ret < 0) {
 		dev_err(dev, "failed to read temperature\n");
 		return ret;
@@ -656,7 +664,7 @@ static int bme680_read_press(struct bme680_data *data,
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_PRESS_MSB,
-			       (u8 *) &tmp, 3);
+			       &tmp, 3);
 	if (ret < 0) {
 		dev_err(dev, "failed to read pressure\n");
 		return ret;
@@ -689,7 +697,7 @@ static int bme680_read_humid(struct bme680_data *data,
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BM6880_REG_HUMIDITY_MSB,
-			       (u8 *) &tmp, 2);
+			       &tmp, sizeof(tmp));
 	if (ret < 0) {
 		dev_err(dev, "failed to read humidity\n");
 		return ret;
@@ -754,7 +762,7 @@ static int bme680_read_gas(struct bme680_data *data,
 	}
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_GAS_MSB,
-			       (u8 *) &tmp, 2);
+			       &tmp, sizeof(tmp));
 	if (ret < 0) {
 		dev_err(dev, "failed to read gas resistance\n");
 		return ret;
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 13bdfbbf5f71..cccd4c26dfa4 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -150,8 +150,7 @@ static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
 	if (err < 0)
 		goto st_accel_set_fullscale_error;
 
-	sdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-					&sdata->sensor_settings->fs.fs_avl[i];
+	sdata->current_fullscale = &sdata->sensor_settings->fs.fs_avl[i];
 	return err;
 
 st_accel_set_fullscale_error:
@@ -278,8 +277,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 	    !sdata->sensor_settings->drdy_irq.int2.addr) {
 		if (pdata->drdy_int_pin)
 			dev_info(&indio_dev->dev,
-				 "DRDY on pin INT%d specified, but sensor "
-				 "does not support interrupts\n",
+				 "DRDY on pin INT%d specified, but sensor does not support interrupts\n",
 				 pdata->drdy_int_pin);
 		return 0;
 	}
diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
index 286830fb5d35..b400560bac93 100644
--- a/drivers/iio/common/st_sensors/st_sensors_i2c.c
+++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
@@ -49,8 +49,8 @@ int st_sensors_i2c_configure(struct iio_dev *indio_dev,
 
 	sdata->regmap = devm_regmap_init_i2c(client, config);
 	if (IS_ERR(sdata->regmap)) {
-		dev_err(&client->dev, "Failed to register i2c regmap (%d)\n",
-			(int)PTR_ERR(sdata->regmap));
+		dev_err(&client->dev, "Failed to register i2c regmap (%ld)\n",
+			PTR_ERR(sdata->regmap));
 		return PTR_ERR(sdata->regmap);
 	}
 
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
index 1275fb0eda31..ee70515bb89f 100644
--- a/drivers/iio/common/st_sensors/st_sensors_spi.c
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -44,7 +44,7 @@ static bool st_sensors_is_spi_3_wire(struct spi_device *spi)
 	if (device_property_read_bool(dev, "spi-3wire"))
 		return true;
 
-	pdata = (struct st_sensors_platform_data *)dev->platform_data;
+	pdata = dev_get_platdata(dev);
 	if (pdata && pdata->spi_3wire)
 		return true;
 
@@ -101,8 +101,8 @@ int st_sensors_spi_configure(struct iio_dev *indio_dev,
 
 	sdata->regmap = devm_regmap_init_spi(spi, config);
 	if (IS_ERR(sdata->regmap)) {
-		dev_err(&spi->dev, "Failed to register spi regmap (%d)\n",
-			(int)PTR_ERR(sdata->regmap));
+		dev_err(&spi->dev, "Failed to register spi regmap (%ld)\n",
+			PTR_ERR(sdata->regmap));
 		return PTR_ERR(sdata->regmap);
 	}
 
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index e817537cdfb5..0507283bd4c1 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -44,8 +44,7 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
 			  sdata->sensor_settings->drdy_irq.stat_drdy.addr,
 			  &status);
 	if (ret < 0) {
-		dev_err(sdata->dev,
-			"error checking samples available\n");
+		dev_err(sdata->dev, "error checking samples available\n");
 		return ret;
 	}
 
@@ -148,9 +147,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 	case IRQF_TRIGGER_LOW:
 		if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
 			dev_err(&indio_dev->dev,
-				"falling/low specified for IRQ "
-				"but hardware supports only rising/high: "
-				"will request rising/high\n");
+				"falling/low specified for IRQ but hardware supports only rising/high: will request rising/high\n");
 			if (irq_trig == IRQF_TRIGGER_FALLING)
 				irq_trig = IRQF_TRIGGER_RISING;
 			if (irq_trig == IRQF_TRIGGER_LOW)
@@ -163,8 +160,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 			if (err < 0)
 				goto iio_trigger_free;
 			dev_info(&indio_dev->dev,
-				 "interrupts on the falling edge or "
-				 "active low level\n");
+				 "interrupts on the falling edge or active low level\n");
 		}
 		break;
 	case IRQF_TRIGGER_RISING:
@@ -178,8 +174,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 	default:
 		/* This is the most preferred mode, if possible */
 		dev_err(&indio_dev->dev,
-			"unsupported IRQ trigger specified (%lx), enforce "
-			"rising edge\n", irq_trig);
+			"unsupported IRQ trigger specified (%lx), enforce rising edge\n", irq_trig);
 		irq_trig = IRQF_TRIGGER_RISING;
 	}
 
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 7eaf77707b0b..6daeddf37f60 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -61,7 +61,7 @@ config BMG160
 	help
 	  Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor
 	  driver connected via I2C or SPI. This driver also supports BMI055
-	  gyroscope.
+	  and BMI088 gyroscope.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called bmg160_i2c or bmg160_spi.
diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c
index 4fc9c6a3321f..b3fa46bd02cb 100644
--- a/drivers/iio/gyro/bmg160_i2c.c
+++ b/drivers/iio/gyro/bmg160_i2c.c
@@ -21,8 +21,8 @@ static int bmg160_i2c_probe(struct i2c_client *client,
 
 	regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
 	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+			regmap);
 		return PTR_ERR(regmap);
 	}
 
@@ -42,6 +42,7 @@ static int bmg160_i2c_remove(struct i2c_client *client)
 static const struct acpi_device_id bmg160_acpi_match[] = {
 	{"BMG0160", 0},
 	{"BMI055B", 0},
+	{"BMI088B", 0},
 	{},
 };
 
@@ -50,6 +51,7 @@ MODULE_DEVICE_TABLE(acpi, bmg160_acpi_match);
 static const struct i2c_device_id bmg160_i2c_id[] = {
 	{"bmg160", 0},
 	{"bmi055_gyro", 0},
+	{"bmi088_gyro", 0},
 	{}
 };
 
diff --git a/drivers/iio/gyro/bmg160_spi.c b/drivers/iio/gyro/bmg160_spi.c
index 182a59c42507..745962e1e423 100644
--- a/drivers/iio/gyro/bmg160_spi.c
+++ b/drivers/iio/gyro/bmg160_spi.c
@@ -19,8 +19,8 @@ static int bmg160_spi_probe(struct spi_device *spi)
 
 	regmap = devm_regmap_init_spi(spi, &bmg160_regmap_spi_conf);
 	if (IS_ERR(regmap)) {
-		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+			regmap);
 		return PTR_ERR(regmap);
 	}
 
@@ -37,6 +37,7 @@ static int bmg160_spi_remove(struct spi_device *spi)
 static const struct spi_device_id bmg160_spi_id[] = {
 	{"bmg160", 0},
 	{"bmi055_gyro", 0},
+	{"bmi088_gyro", 0},
 	{}
 };
 
diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c
index afa8018b9238..ef5bcbc4b45b 100644
--- a/drivers/iio/gyro/mpu3050-i2c.c
+++ b/drivers/iio/gyro/mpu3050-i2c.c
@@ -51,8 +51,8 @@ static int mpu3050_i2c_probe(struct i2c_client *client,
 
 	regmap = devm_regmap_init_i2c(client, &mpu3050_i2c_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+			regmap);
 		return PTR_ERR(regmap);
 	}
 
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
index 7465ad62391c..9c92ff7a82be 100644
--- a/drivers/iio/gyro/st_gyro_buffer.c
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -37,8 +37,7 @@ static int st_gyro_buffer_postenable(struct iio_dev *indio_dev)
 	if (err < 0)
 		return err;
 
-	err = st_sensors_set_axis_enable(indio_dev,
-					 (u8)indio_dev->active_scan_mask[0]);
+	err = st_sensors_set_axis_enable(indio_dev, indio_dev->active_scan_mask[0]);
 	if (err < 0)
 		goto st_gyro_buffer_predisable;
 
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 26c50b24bc08..c8aa051995d3 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -460,6 +460,7 @@ EXPORT_SYMBOL(st_gyro_get_settings);
 int st_gyro_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *gdata = iio_priv(indio_dev);
+	struct st_sensors_platform_data *pdata;
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -477,12 +478,12 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
 	indio_dev->channels = gdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
-	gdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-					&gdata->sensor_settings->fs.fs_avl[0];
+	gdata->current_fullscale = &gdata->sensor_settings->fs.fs_avl[0];
 	gdata->odr = gdata->sensor_settings->odr.odr_avl[0].hz;
 
-	err = st_sensors_init_sensor(indio_dev,
-				(struct st_sensors_platform_data *)&gyro_pdata);
+	pdata = (struct st_sensors_platform_data *)&gyro_pdata;
+
+	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
 		goto st_gyro_power_off;
 
diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c
index 84010501762d..546fc37ad75d 100644
--- a/drivers/iio/health/max30100.c
+++ b/drivers/iio/health/max30100.c
@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -267,11 +267,10 @@ static int max30100_get_current_idx(unsigned int val, int *reg)
 static int max30100_led_init(struct max30100_data *data)
 {
 	struct device *dev = &data->client->dev;
-	struct device_node *np = dev->of_node;
 	unsigned int val[2];
 	int reg, ret;
 
-	ret = of_property_read_u32_array(np, "maxim,led-current-microamp",
+	ret = device_property_read_u32_array(dev, "maxim,led-current-microamp",
 					(unsigned int *) &val, 2);
 	if (ret) {
 		/* Default to 24 mA RED LED, 50 mA IR LED */
@@ -502,7 +501,7 @@ MODULE_DEVICE_TABLE(of, max30100_dt_ids);
 static struct i2c_driver max30100_driver = {
 	.driver = {
 		.name	= MAX30100_DRV_NAME,
-		.of_match_table	= of_match_ptr(max30100_dt_ids),
+		.of_match_table	= max30100_dt_ids,
 	},
 	.probe		= max30100_probe,
 	.remove		= max30100_remove,
diff --git a/drivers/iio/humidity/hts221_buffer.c b/drivers/iio/humidity/hts221_buffer.c
index 81d50a861c22..9fb3f33614d4 100644
--- a/drivers/iio/humidity/hts221_buffer.c
+++ b/drivers/iio/humidity/hts221_buffer.c
@@ -74,10 +74,9 @@ static irqreturn_t hts221_trigger_handler_thread(int irq, void *private)
 
 int hts221_allocate_trigger(struct hts221_hw *hw)
 {
+	struct st_sensors_platform_data *pdata = dev_get_platdata(hw->dev);
 	struct iio_dev *iio_dev = iio_priv_to_dev(hw);
 	bool irq_active_low = false, open_drain = false;
-	struct device_node *np = hw->dev->of_node;
-	struct st_sensors_platform_data *pdata;
 	unsigned long irq_type;
 	int err;
 
@@ -106,8 +105,7 @@ int hts221_allocate_trigger(struct hts221_hw *hw)
 	if (err < 0)
 		return err;
 
-	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
-	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
+	if (device_property_read_bool(hw->dev, "drive-open-drain") ||
 	    (pdata && pdata->open_drain)) {
 		irq_type |= IRQF_SHARED;
 		open_drain = true;
diff --git a/drivers/iio/humidity/hts221_i2c.c b/drivers/iio/humidity/hts221_i2c.c
index 4272b7030c44..cab39c4756f8 100644
--- a/drivers/iio/humidity/hts221_i2c.c
+++ b/drivers/iio/humidity/hts221_i2c.c
@@ -32,8 +32,8 @@ static int hts221_i2c_probe(struct i2c_client *client,
 
 	regmap = devm_regmap_init_i2c(client, &hts221_i2c_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
+			PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
 
@@ -63,7 +63,7 @@ static struct i2c_driver hts221_driver = {
 	.driver = {
 		.name = "hts221_i2c",
 		.pm = &hts221_pm_ops,
-		.of_match_table = of_match_ptr(hts221_i2c_of_match),
+		.of_match_table = hts221_i2c_of_match,
 		.acpi_match_table = ACPI_PTR(hts221_acpi_match),
 	},
 	.probe = hts221_i2c_probe,
diff --git a/drivers/iio/humidity/hts221_spi.c b/drivers/iio/humidity/hts221_spi.c
index 055dba8897d2..729e86e433b1 100644
--- a/drivers/iio/humidity/hts221_spi.c
+++ b/drivers/iio/humidity/hts221_spi.c
@@ -31,8 +31,8 @@ static int hts221_spi_probe(struct spi_device *spi)
 
 	regmap = devm_regmap_init_spi(spi, &hts221_spi_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
+			PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
 
@@ -56,7 +56,7 @@ static struct spi_driver hts221_driver = {
 	.driver = {
 		.name = "hts221_spi",
 		.pm = &hts221_pm_ops,
-		.of_match_table = of_match_ptr(hts221_spi_of_match),
+		.of_match_table = hts221_spi_of_match,
 	},
 	.probe = hts221_spi_probe,
 	.id_table = hts221_spi_id_table,
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index a8afd01de4f3..2e7d0d337f8f 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -419,7 +419,7 @@ int __adis_initial_startup(struct adis *adis)
 
 	if (prod_id != adis->data->prod_id)
 		dev_warn(&adis->spi->dev,
-			 "Device ID(%u) and product ID(%u) do not match.",
+			 "Device ID(%u) and product ID(%u) do not match.\n",
 			 adis->data->prod_id, prod_id);
 
 	return 0;
diff --git a/drivers/iio/imu/adis16400.c b/drivers/iio/imu/adis16400.c
index 05e70c1c4835..4445c242709c 100644
--- a/drivers/iio/imu/adis16400.c
+++ b/drivers/iio/imu/adis16400.c
@@ -258,7 +258,7 @@ static int adis16400_show_product_id(void *arg, u64 *val)
 
 	return 0;
 }
-DEFINE_SIMPLE_ATTRIBUTE(adis16400_product_id_fops,
+DEFINE_DEBUGFS_ATTRIBUTE(adis16400_product_id_fops,
 	adis16400_show_product_id, NULL, "%lld\n");
 
 static int adis16400_show_flash_count(void *arg, u64 *val)
@@ -275,7 +275,7 @@ static int adis16400_show_flash_count(void *arg, u64 *val)
 
 	return 0;
 }
-DEFINE_SIMPLE_ATTRIBUTE(adis16400_flash_count_fops,
+DEFINE_DEBUGFS_ATTRIBUTE(adis16400_flash_count_fops,
 	adis16400_show_flash_count, NULL, "%lld\n");
 
 static int adis16400_debugfs_init(struct iio_dev *indio_dev)
@@ -283,15 +283,16 @@ static int adis16400_debugfs_init(struct iio_dev *indio_dev)
 	struct adis16400_state *st = iio_priv(indio_dev);
 
 	if (st->variant->flags & ADIS16400_HAS_SERIAL_NUMBER)
-		debugfs_create_file("serial_number", 0400,
-			indio_dev->debugfs_dentry, st,
-			&adis16400_serial_number_fops);
+		debugfs_create_file_unsafe("serial_number", 0400,
+				indio_dev->debugfs_dentry, st,
+				&adis16400_serial_number_fops);
 	if (st->variant->flags & ADIS16400_HAS_PROD_ID)
-		debugfs_create_file("product_id", 0400,
+		debugfs_create_file_unsafe("product_id", 0400,
+				indio_dev->debugfs_dentry, st,
+				&adis16400_product_id_fops);
+	debugfs_create_file_unsafe("flash_count", 0400,
 			indio_dev->debugfs_dentry, st,
-			&adis16400_product_id_fops);
-	debugfs_create_file("flash_count", 0400, indio_dev->debugfs_dentry,
-		st, &adis16400_flash_count_fops);
+			&adis16400_flash_count_fops);
 
 	return 0;
 }
diff --git a/drivers/iio/imu/adis16460.c b/drivers/iio/imu/adis16460.c
index 0027683d0256..0957f5cfe9c0 100644
--- a/drivers/iio/imu/adis16460.c
+++ b/drivers/iio/imu/adis16460.c
@@ -87,8 +87,8 @@ static int adis16460_show_serial_number(void *arg, u64 *val)
 
 	return 0;
 }
-DEFINE_SIMPLE_ATTRIBUTE(adis16460_serial_number_fops,
-	adis16460_show_serial_number, NULL, "0x%.4llx\n");
+DEFINE_DEBUGFS_ATTRIBUTE(adis16460_serial_number_fops,
+		adis16460_show_serial_number, NULL, "0x%.4llx\n");
 
 static int adis16460_show_product_id(void *arg, u64 *val)
 {
@@ -105,8 +105,8 @@ static int adis16460_show_product_id(void *arg, u64 *val)
 
 	return 0;
 }
-DEFINE_SIMPLE_ATTRIBUTE(adis16460_product_id_fops,
-	adis16460_show_product_id, NULL, "%llu\n");
+DEFINE_DEBUGFS_ATTRIBUTE(adis16460_product_id_fops,
+		adis16460_show_product_id, NULL, "%llu\n");
 
 static int adis16460_show_flash_count(void *arg, u64 *val)
 {
@@ -123,19 +123,22 @@ static int adis16460_show_flash_count(void *arg, u64 *val)
 
 	return 0;
 }
-DEFINE_SIMPLE_ATTRIBUTE(adis16460_flash_count_fops,
-	adis16460_show_flash_count, NULL, "%lld\n");
+DEFINE_DEBUGFS_ATTRIBUTE(adis16460_flash_count_fops,
+		adis16460_show_flash_count, NULL, "%lld\n");
 
 static int adis16460_debugfs_init(struct iio_dev *indio_dev)
 {
 	struct adis16460 *adis16460 = iio_priv(indio_dev);
 
-	debugfs_create_file("serial_number", 0400, indio_dev->debugfs_dentry,
-		adis16460, &adis16460_serial_number_fops);
-	debugfs_create_file("product_id", 0400, indio_dev->debugfs_dentry,
-		adis16460, &adis16460_product_id_fops);
-	debugfs_create_file("flash_count", 0400, indio_dev->debugfs_dentry,
-		adis16460, &adis16460_flash_count_fops);
+	debugfs_create_file_unsafe("serial_number", 0400,
+			indio_dev->debugfs_dentry, adis16460,
+			&adis16460_serial_number_fops);
+	debugfs_create_file_unsafe("product_id", 0400,
+			indio_dev->debugfs_dentry, adis16460,
+			&adis16460_product_id_fops);
+	debugfs_create_file_unsafe("flash_count", 0400,
+			indio_dev->debugfs_dentry, adis16460,
+			&adis16460_flash_count_fops);
 
 	return 0;
 }
diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c
index e36f5e82d400..26398614eddf 100644
--- a/drivers/iio/imu/bmi160/bmi160_i2c.c
+++ b/drivers/iio/imu/bmi160/bmi160_i2c.c
@@ -24,8 +24,8 @@ static int bmi160_i2c_probe(struct i2c_client *client,
 
 	regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+			regmap);
 		return PTR_ERR(regmap);
 	}
 
diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c
index c19e3df35559..61389b41c6d9 100644
--- a/drivers/iio/imu/bmi160/bmi160_spi.c
+++ b/drivers/iio/imu/bmi160/bmi160_spi.c
@@ -20,8 +20,8 @@ static int bmi160_spi_probe(struct spi_device *spi)
 
 	regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+			regmap);
 		return PTR_ERR(regmap);
 	}
 	return bmi160_core_probe(&spi->dev, regmap, id->name, true);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
index 2f8560ba4572..c27d06035c8b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
@@ -135,6 +135,7 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
 	st->mux_client = NULL;
 	if (ACPI_HANDLE(&client->dev)) {
 		struct i2c_board_info info;
+		struct i2c_client *mux_client;
 		struct acpi_device *adev;
 		int ret = -1;
 
@@ -172,9 +173,10 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
 			} else
 				return 0; /* no secondary addr, which is OK */
 		}
-		st->mux_client = i2c_new_device(st->muxc->adapter[0], &info);
-		if (!st->mux_client)
-			return -ENODEV;
+		mux_client = i2c_new_client_device(st->muxc->adapter[0], &info);
+		if (IS_ERR(mux_client))
+			return PTR_ERR(mux_client);
+		st->mux_client = mux_client;
 	}
 
 	return 0;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 0b8d2f7a0165..4d604fe842e5 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -526,7 +526,7 @@ static int inv_mpu6050_sensor_set(struct inv_mpu6050_state  *st, int reg,
 	__be16 d = cpu_to_be16(val);
 
 	ind = (axis - IIO_MOD_X) * 2;
-	result = regmap_bulk_write(st->map, reg + ind, (u8 *)&d, 2);
+	result = regmap_bulk_write(st->map, reg + ind, &d, sizeof(d));
 	if (result)
 		return -EINVAL;
 
@@ -540,7 +540,7 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state  *st, int reg,
 	__be16 d;
 
 	ind = (axis - IIO_MOD_X) * 2;
-	result = regmap_bulk_read(st->map, reg + ind, (u8 *)&d, 2);
+	result = regmap_bulk_read(st->map, reg + ind, &d, sizeof(d));
 	if (result)
 		return -EINVAL;
 	*val = (short)be16_to_cpup(&d);
@@ -1248,12 +1248,31 @@ static const struct attribute_group inv_attribute_group = {
 	.attrs = inv_attributes
 };
 
+static int inv_mpu6050_reg_access(struct iio_dev *indio_dev,
+				  unsigned int reg,
+				  unsigned int writeval,
+				  unsigned int *readval)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+	if (readval)
+		ret = regmap_read(st->map, reg, readval);
+	else
+		ret = regmap_write(st->map, reg, writeval);
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
 static const struct iio_info mpu_info = {
 	.read_raw = &inv_mpu6050_read_raw,
 	.write_raw = &inv_mpu6050_write_raw,
 	.write_raw_get_fmt = &inv_write_raw_get_fmt,
 	.attrs = &inv_attribute_group,
 	.validate_trigger = inv_mpu6050_validate_trigger,
+	.debugfs_reg_access = &inv_mpu6050_reg_access,
 };
 
 /**
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index 6993d3b87bb0..28cfae1e61cf 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -122,8 +122,8 @@ static int inv_mpu_probe(struct i2c_client *client,
 
 	regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+			regmap);
 		return PTR_ERR(regmap);
 	}
 
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index 673b198e6368..6f968ce687e1 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -53,8 +53,8 @@ static int inv_mpu_probe(struct spi_device *spi)
 
 	regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+			regmap);
 		return PTR_ERR(regmap);
 	}
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 41cb20cb3809..b56df409ed0f 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -111,7 +111,7 @@ struct st_lsm6dsx_odr {
 	u8 val;
 };
 
-#define ST_LSM6DSX_ODR_LIST_SIZE	6
+#define ST_LSM6DSX_ODR_LIST_SIZE	8
 struct st_lsm6dsx_odr_table_entry {
 	struct st_lsm6dsx_reg reg;
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 64ef07a30726..e20d2ca928cc 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -88,6 +88,69 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
 			.len = 6,
 		},
 	},
+	/* LIS3MDL */
+	{
+		.i2c_addr = { 0x1e },
+		.wai = {
+			.addr = 0x0f,
+			.val = 0x3d,
+		},
+		.id = ST_LSM6DSX_ID_MAGN,
+		.odr_table = {
+			.reg = {
+				.addr = 0x20,
+				.mask = GENMASK(4, 2),
+			},
+			.odr_avl[0] = {  1000, 0x0 },
+			.odr_avl[1] = {  2000, 0x1 },
+			.odr_avl[2] = {  3000, 0x2 },
+			.odr_avl[3] = {  5000, 0x3 },
+			.odr_avl[4] = { 10000, 0x4 },
+			.odr_avl[5] = { 20000, 0x5 },
+			.odr_avl[6] = { 40000, 0x6 },
+			.odr_avl[7] = { 80000, 0x7 },
+			.odr_len = 8,
+		},
+		.fs_table = {
+			.reg = {
+				.addr = 0x21,
+				.mask = GENMASK(6, 5),
+			},
+			.fs_avl[0] = {
+				.gain = 146,
+				.val = 0x00,
+			}, /* 4000 uG/LSB */
+			.fs_avl[1] = {
+				.gain = 292,
+				.val = 0x01,
+			}, /* 8000 uG/LSB */
+			.fs_avl[2] = {
+				.gain = 438,
+				.val = 0x02,
+			}, /* 12000 uG/LSB */
+			.fs_avl[3] = {
+				.gain = 584,
+				.val = 0x03,
+			}, /* 16000 uG/LSB */
+			.fs_len = 4,
+		},
+		.pwr_table = {
+			.reg = {
+				.addr = 0x22,
+				.mask = GENMASK(1, 0),
+			},
+			.off_val = 0x2,
+			.on_val = 0x0,
+		},
+		.bdu = {
+			.addr = 0x24,
+			.mask = BIT(6),
+		},
+		.out = {
+			.addr = 0x28,
+			.len = 6,
+		},
+	},
 };
 
 static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
@@ -518,6 +581,36 @@ st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
 	return ret;
 }
 
+static int
+st_lsm6dsx_shub_set_full_scale(struct st_lsm6dsx_sensor *sensor,
+			       u32 gain)
+{
+	const struct st_lsm6dsx_fs_table_entry *fs_table;
+	int i, err;
+
+	fs_table = &sensor->ext_info.settings->fs_table;
+	if (!fs_table->reg.addr)
+		return -ENOTSUPP;
+
+	for (i = 0; i < fs_table->fs_len; i++) {
+		if (fs_table->fs_avl[i].gain == gain)
+			break;
+	}
+
+	if (i == fs_table->fs_len)
+		return -EINVAL;
+
+	err = st_lsm6dsx_shub_write_with_mask(sensor, fs_table->reg.addr,
+					      fs_table->reg.mask,
+					      fs_table->fs_avl[i].val);
+	if (err < 0)
+		return err;
+
+	sensor->gain = gain;
+
+	return 0;
+}
+
 static int
 st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
 			  struct iio_chan_spec const *chan,
@@ -552,6 +645,9 @@ st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
 		}
 		break;
 	}
+	case IIO_CHAN_INFO_SCALE:
+		err = st_lsm6dsx_shub_set_full_scale(sensor, val2);
+		break;
 	default:
 		err = -EINVAL;
 		break;
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 4ada5592aa2b..221157136af6 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -316,8 +316,7 @@ static int iio_scan_mask_set(struct iio_dev *indio_dev,
 	const unsigned long *mask;
 	unsigned long *trialmask;
 
-	trialmask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
-			    sizeof(*trialmask), GFP_KERNEL);
+	trialmask = bitmap_zalloc(indio_dev->masklength, GFP_KERNEL);
 	if (trialmask == NULL)
 		return -ENOMEM;
 	if (!indio_dev->masklength) {
@@ -687,6 +686,13 @@ static int iio_verify_update(struct iio_dev *indio_dev,
 	bool scan_timestamp;
 	unsigned int modes;
 
+	if (insert_buffer &&
+	    bitmap_empty(insert_buffer->scan_mask, indio_dev->masklength)) {
+		dev_dbg(&indio_dev->dev,
+			"At least one scan element must be enabled first\n");
+		return -EINVAL;
+	}
+
 	memset(config, 0, sizeof(*config));
 	config->watermark = ~0;
 
@@ -1277,11 +1283,6 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
 
 	indio_dev->groups[indio_dev->groupcounter++] = &buffer->buffer_group;
 
-	if (buffer->scan_el_attrs != NULL) {
-		attr = buffer->scan_el_attrs->attrs;
-		while (*attr++ != NULL)
-			attrcount_orig++;
-	}
 	attrcount = attrcount_orig;
 	INIT_LIST_HEAD(&buffer->scan_el_dev_attr_list);
 	channels = indio_dev->channels;
@@ -1319,9 +1320,6 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
 		ret = -ENOMEM;
 		goto error_free_scan_mask;
 	}
-	if (buffer->scan_el_attrs)
-		memcpy(buffer->scan_el_group.attrs, buffer->scan_el_attrs,
-		       sizeof(buffer->scan_el_group.attrs[0])*attrcount_orig);
 	attrn = attrcount_orig;
 
 	list_for_each_entry(p, &buffer->scan_el_dev_attr_list, l)
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 24f7bbff4938..31d7664c5b4f 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -572,46 +572,46 @@ static ssize_t __iio_format_value(char *buf, size_t len, unsigned int type,
 
 	switch (type) {
 	case IIO_VAL_INT:
-		return snprintf(buf, len, "%d", vals[0]);
+		return scnprintf(buf, len, "%d", vals[0]);
 	case IIO_VAL_INT_PLUS_MICRO_DB:
 		scale_db = true;
 		/* fall through */
 	case IIO_VAL_INT_PLUS_MICRO:
 		if (vals[1] < 0)
-			return snprintf(buf, len, "-%d.%06u%s", abs(vals[0]),
+			return scnprintf(buf, len, "-%d.%06u%s", abs(vals[0]),
 					-vals[1], scale_db ? " dB" : "");
 		else
-			return snprintf(buf, len, "%d.%06u%s", vals[0], vals[1],
+			return scnprintf(buf, len, "%d.%06u%s", vals[0], vals[1],
 					scale_db ? " dB" : "");
 	case IIO_VAL_INT_PLUS_NANO:
 		if (vals[1] < 0)
-			return snprintf(buf, len, "-%d.%09u", abs(vals[0]),
+			return scnprintf(buf, len, "-%d.%09u", abs(vals[0]),
 					-vals[1]);
 		else
-			return snprintf(buf, len, "%d.%09u", vals[0], vals[1]);
+			return scnprintf(buf, len, "%d.%09u", vals[0], vals[1]);
 	case IIO_VAL_FRACTIONAL:
 		tmp = div_s64((s64)vals[0] * 1000000000LL, vals[1]);
 		tmp1 = vals[1];
 		tmp0 = (int)div_s64_rem(tmp, 1000000000, &tmp1);
-		return snprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
+		return scnprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
 	case IIO_VAL_FRACTIONAL_LOG2:
 		tmp = shift_right((s64)vals[0] * 1000000000LL, vals[1]);
 		tmp0 = (int)div_s64_rem(tmp, 1000000000LL, &tmp1);
-		return snprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
+		return scnprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
 	case IIO_VAL_INT_MULTIPLE:
 	{
 		int i;
 		int l = 0;
 
 		for (i = 0; i < size; ++i) {
-			l += snprintf(&buf[l], len - l, "%d ", vals[i]);
+			l += scnprintf(&buf[l], len - l, "%d ", vals[i]);
 			if (l >= len)
 				break;
 		}
 		return l;
 	}
 	case IIO_VAL_CHAR:
-		return snprintf(buf, len, "%c", (char)vals[0]);
+		return scnprintf(buf, len, "%c", (char)vals[0]);
 	default:
 		return 0;
 	}
@@ -682,10 +682,10 @@ static ssize_t iio_format_avail_list(char *buf, const int *vals,
 			if (len >= PAGE_SIZE)
 				return -EFBIG;
 			if (i < length - 1)
-				len += snprintf(buf + len, PAGE_SIZE - len,
+				len += scnprintf(buf + len, PAGE_SIZE - len,
 						" ");
 			else
-				len += snprintf(buf + len, PAGE_SIZE - len,
+				len += scnprintf(buf + len, PAGE_SIZE - len,
 						"\n");
 			if (len >= PAGE_SIZE)
 				return -EFBIG;
@@ -698,10 +698,10 @@ static ssize_t iio_format_avail_list(char *buf, const int *vals,
 			if (len >= PAGE_SIZE)
 				return -EFBIG;
 			if (i < length / 2 - 1)
-				len += snprintf(buf + len, PAGE_SIZE - len,
+				len += scnprintf(buf + len, PAGE_SIZE - len,
 						" ");
 			else
-				len += snprintf(buf + len, PAGE_SIZE - len,
+				len += scnprintf(buf + len, PAGE_SIZE - len,
 						"\n");
 			if (len >= PAGE_SIZE)
 				return -EFBIG;
@@ -725,10 +725,10 @@ static ssize_t iio_format_avail_range(char *buf, const int *vals, int type)
 			if (len >= PAGE_SIZE)
 				return -EFBIG;
 			if (i < 2)
-				len += snprintf(buf + len, PAGE_SIZE - len,
+				len += scnprintf(buf + len, PAGE_SIZE - len,
 						" ");
 			else
-				len += snprintf(buf + len, PAGE_SIZE - len,
+				len += scnprintf(buf + len, PAGE_SIZE - len,
 						"]\n");
 			if (len >= PAGE_SIZE)
 				return -EFBIG;
@@ -741,10 +741,10 @@ static ssize_t iio_format_avail_range(char *buf, const int *vals, int type)
 			if (len >= PAGE_SIZE)
 				return -EFBIG;
 			if (i < 2)
-				len += snprintf(buf + len, PAGE_SIZE - len,
+				len += scnprintf(buf + len, PAGE_SIZE - len,
 						" ");
 			else
-				len += snprintf(buf + len, PAGE_SIZE - len,
+				len += scnprintf(buf + len, PAGE_SIZE - len,
 						"]\n");
 			if (len >= PAGE_SIZE)
 				return -EFBIG;
@@ -1549,17 +1549,6 @@ static void devm_iio_device_release(struct device *dev, void *res)
 	iio_device_free(*(struct iio_dev **)res);
 }
 
-int devm_iio_device_match(struct device *dev, void *res, void *data)
-{
-	struct iio_dev **r = res;
-	if (!r || !*r) {
-		WARN_ON(!r || !*r);
-		return 0;
-	}
-	return *r == data;
-}
-EXPORT_SYMBOL_GPL(devm_iio_device_match);
-
 /**
  * devm_iio_device_alloc - Resource-managed iio_device_alloc()
  * @dev:		Device to allocate iio_dev for
@@ -1568,9 +1557,6 @@ EXPORT_SYMBOL_GPL(devm_iio_device_match);
  * Managed iio_device_alloc. iio_dev allocated with this function is
  * automatically freed on driver detach.
  *
- * If an iio_dev allocated with this function needs to be freed separately,
- * devm_iio_device_free() must be used.
- *
  * RETURNS:
  * Pointer to allocated iio_dev on success, NULL on failure.
  */
@@ -1595,23 +1581,6 @@ struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv)
 }
 EXPORT_SYMBOL_GPL(devm_iio_device_alloc);
 
-/**
- * devm_iio_device_free - Resource-managed iio_device_free()
- * @dev:		Device this iio_dev belongs to
- * @iio_dev:		the iio_dev associated with the device
- *
- * Free iio_dev allocated with devm_iio_device_alloc().
- */
-void devm_iio_device_free(struct device *dev, struct iio_dev *iio_dev)
-{
-	int rc;
-
-	rc = devres_release(dev, devm_iio_device_release,
-			    devm_iio_device_match, iio_dev);
-	WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_device_free);
-
 /**
  * iio_chrdev_open() - chrdev file open for buffer access and ioctls
  * @inode:	Inode structure for identifying the device in the file system
@@ -1714,6 +1683,9 @@ int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod)
 {
 	int ret;
 
+	if (!indio_dev->info)
+		return -EINVAL;
+
 	indio_dev->driver_module = this_mod;
 	/* If the calling driver did not initialize of_node, do it here */
 	if (!indio_dev->dev.of_node && indio_dev->dev.parent)
@@ -1726,9 +1698,6 @@ int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod)
 	if (ret < 0)
 		return ret;
 
-	if (!indio_dev->info)
-		return -EINVAL;
-
 	/* configure elements for the chrdev */
 	indio_dev->dev.devt = MKDEV(MAJOR(iio_devt), indio_dev->id);
 
@@ -1833,23 +1802,6 @@ int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
 }
 EXPORT_SYMBOL_GPL(__devm_iio_device_register);
 
-/**
- * devm_iio_device_unregister - Resource-managed iio_device_unregister()
- * @dev:	Device this iio_dev belongs to
- * @indio_dev:	the iio_dev associated with the device
- *
- * Unregister iio_dev registered with devm_iio_device_register().
- */
-void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev)
-{
-	int rc;
-
-	rc = devres_release(dev, devm_iio_device_unreg,
-			    devm_iio_device_match, indio_dev);
-	WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_device_unregister);
-
 /**
  * iio_device_claim_direct_mode - Keep device in direct mode
  * @indio_dev:	the iio_dev associated with the device
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 3908a9a90035..53d1931f6be8 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -585,18 +585,6 @@ static void devm_iio_trigger_release(struct device *dev, void *res)
 	iio_trigger_free(*(struct iio_trigger **)res);
 }
 
-static int devm_iio_trigger_match(struct device *dev, void *res, void *data)
-{
-	struct iio_trigger **r = res;
-
-	if (!r || !*r) {
-		WARN_ON(!r || !*r);
-		return 0;
-	}
-
-	return *r == data;
-}
-
 /**
  * devm_iio_trigger_alloc - Resource-managed iio_trigger_alloc()
  * @dev:		Device to allocate iio_trigger for
@@ -608,9 +596,6 @@ static int devm_iio_trigger_match(struct device *dev, void *res, void *data)
  * Managed iio_trigger_alloc.  iio_trigger allocated with this function is
  * automatically freed on driver detach.
  *
- * If an iio_trigger allocated with this function needs to be freed separately,
- * devm_iio_trigger_free() must be used.
- *
  * RETURNS:
  * Pointer to allocated iio_trigger on success, NULL on failure.
  */
@@ -640,23 +625,6 @@ struct iio_trigger *devm_iio_trigger_alloc(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_iio_trigger_alloc);
 
-/**
- * devm_iio_trigger_free - Resource-managed iio_trigger_free()
- * @dev:		Device this iio_dev belongs to
- * @iio_trig:		the iio_trigger associated with the device
- *
- * Free iio_trigger allocated with devm_iio_trigger_alloc().
- */
-void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig)
-{
-	int rc;
-
-	rc = devres_release(dev, devm_iio_trigger_release,
-			    devm_iio_trigger_match, iio_trig);
-	WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_trigger_free);
-
 static void devm_iio_trigger_unreg(struct device *dev, void *res)
 {
 	iio_trigger_unregister(*(struct iio_trigger **)res);
@@ -673,9 +641,6 @@ static void devm_iio_trigger_unreg(struct device *dev, void *res)
  * calls iio_trigger_register() internally. Refer to that function for more
  * information.
  *
- * If an iio_trigger registered with this function needs to be unregistered
- * separately, devm_iio_trigger_unregister() must be used.
- *
  * RETURNS:
  * 0 on success, negative error number on failure.
  */
@@ -701,24 +666,6 @@ int __devm_iio_trigger_register(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(__devm_iio_trigger_register);
 
-/**
- * devm_iio_trigger_unregister - Resource-managed iio_trigger_unregister()
- * @dev:	device this iio_trigger belongs to
- * @trig_info:	the trigger associated with the device
- *
- * Unregister trigger registered with devm_iio_trigger_register().
- */
-void devm_iio_trigger_unregister(struct device *dev,
-				 struct iio_trigger *trig_info)
-{
-	int rc;
-
-	rc = devres_release(dev, devm_iio_trigger_unreg, devm_iio_trigger_match,
-			    trig_info);
-	WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_trigger_unregister);
-
 bool iio_trigger_using_own(struct iio_dev *indio_dev)
 {
 	return indio_dev->trig->attached_own_device;
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index 5a8351c9a426..ede99e0d5371 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -360,18 +360,6 @@ static void devm_iio_channel_free(struct device *dev, void *res)
 	iio_channel_release(channel);
 }
 
-static int devm_iio_channel_match(struct device *dev, void *res, void *data)
-{
-	struct iio_channel **r = res;
-
-	if (!r || !*r) {
-		WARN_ON(!r || !*r);
-		return 0;
-	}
-
-	return *r == data;
-}
-
 struct iio_channel *devm_iio_channel_get(struct device *dev,
 					 const char *channel_name)
 {
@@ -394,13 +382,6 @@ struct iio_channel *devm_iio_channel_get(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_iio_channel_get);
 
-void devm_iio_channel_release(struct device *dev, struct iio_channel *channel)
-{
-	WARN_ON(devres_release(dev, devm_iio_channel_free,
-			       devm_iio_channel_match, channel));
-}
-EXPORT_SYMBOL_GPL(devm_iio_channel_release);
-
 struct iio_channel *iio_channel_get_all(struct device *dev)
 {
 	const char *name;
@@ -514,14 +495,6 @@ struct iio_channel *devm_iio_channel_get_all(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(devm_iio_channel_get_all);
 
-void devm_iio_channel_release_all(struct device *dev,
-				  struct iio_channel *channels)
-{
-	WARN_ON(devres_release(dev, devm_iio_channel_free_all,
-			       devm_iio_channel_match, channels));
-}
-EXPORT_SYMBOL_GPL(devm_iio_channel_release_all);
-
 static int iio_channel_read(struct iio_channel *chan, int *val, int *val2,
 	enum iio_chan_info_enum info)
 {
diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c
index e37894f0ae0b..95611f5eff01 100644
--- a/drivers/iio/light/isl29125.c
+++ b/drivers/iio/light/isl29125.c
@@ -213,13 +213,24 @@ static const struct iio_info isl29125_info = {
 	.attrs = &isl29125_attribute_group,
 };
 
-static int isl29125_buffer_preenable(struct iio_dev *indio_dev)
+static int isl29125_buffer_postenable(struct iio_dev *indio_dev)
 {
 	struct isl29125_data *data = iio_priv(indio_dev);
+	int err;
+
+	err = iio_triggered_buffer_postenable(indio_dev);
+	if (err)
+		return err;
 
 	data->conf1 |= ISL29125_MODE_RGB;
-	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+	err = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
 		data->conf1);
+	if (err) {
+		iio_triggered_buffer_predisable(indio_dev);
+		return err;
+	}
+
+	return 0;
 }
 
 static int isl29125_buffer_predisable(struct iio_dev *indio_dev)
@@ -227,19 +238,18 @@ static int isl29125_buffer_predisable(struct iio_dev *indio_dev)
 	struct isl29125_data *data = iio_priv(indio_dev);
 	int ret;
 
-	ret = iio_triggered_buffer_predisable(indio_dev);
-	if (ret < 0)
-		return ret;
-
 	data->conf1 &= ~ISL29125_MODE_MASK;
 	data->conf1 |= ISL29125_MODE_PD;
-	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+	ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
 		data->conf1);
+
+	iio_triggered_buffer_predisable(indio_dev);
+
+	return ret;
 }
 
 static const struct iio_buffer_setup_ops isl29125_buffer_setup_ops = {
-	.preenable = isl29125_buffer_preenable,
-	.postenable = &iio_triggered_buffer_postenable,
+	.postenable = isl29125_buffer_postenable,
 	.predisable = isl29125_buffer_predisable,
 };
 
diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
index 71f99d2a22c1..0626927251bb 100644
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1263,7 +1263,7 @@ static irqreturn_t ltr501_trigger_handler(int irq, void *p)
 
 	if (mask & LTR501_STATUS_ALS_RDY) {
 		ret = regmap_bulk_read(data->regmap, LTR501_ALS_DATA1,
-				       (u8 *)als_buf, sizeof(als_buf));
+				       als_buf, sizeof(als_buf));
 		if (ret < 0)
 			return ret;
 		if (test_bit(0, indio_dev->active_scan_mask))
diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c
index 4889bbeb0c73..400724069d19 100644
--- a/drivers/iio/light/st_uvis25_i2c.c
+++ b/drivers/iio/light/st_uvis25_i2c.c
@@ -31,8 +31,8 @@ static int st_uvis25_i2c_probe(struct i2c_client *client,
 
 	regmap = devm_regmap_init_i2c(client, &st_uvis25_i2c_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
+			PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
 
diff --git a/drivers/iio/light/st_uvis25_spi.c b/drivers/iio/light/st_uvis25_spi.c
index a9ceae4f58b3..cd3761a3ee3f 100644
--- a/drivers/iio/light/st_uvis25_spi.c
+++ b/drivers/iio/light/st_uvis25_spi.c
@@ -31,8 +31,8 @@ static int st_uvis25_spi_probe(struct spi_device *spi)
 
 	regmap = devm_regmap_init_spi(spi, &st_uvis25_spi_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
+			PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
 
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index d8c40a83097d..27a5c28aac7f 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -69,7 +69,7 @@
 #define TSL2563_TIMING_GAIN16	0x10
 #define TSL2563_TIMING_GAIN1	0x00
 
-#define TSL2563_INT_DISBLED	0x00
+#define TSL2563_INT_DISABLED	0x00
 #define TSL2563_INT_LEVEL	0x10
 #define TSL2563_INT_PERSIST(n)	((n) & 0x0F)
 
diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
index be37fcbd4654..9fbde9b71b63 100644
--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -932,7 +932,7 @@ static ssize_t in_illuminance0_target_input_show(struct device *dev,
 {
 	struct tsl2772_chip *chip = iio_priv(dev_to_iio_dev(dev));
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", chip->settings.als_cal_target);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", chip->settings.als_cal_target);
 }
 
 static ssize_t in_illuminance0_target_input_store(struct device *dev,
@@ -986,7 +986,7 @@ static ssize_t in_illuminance0_lux_table_show(struct device *dev,
 	int offset = 0;
 
 	while (i < TSL2772_MAX_LUX_TABLE_SIZE) {
-		offset += snprintf(buf + offset, PAGE_SIZE, "%u,%u,",
+		offset += scnprintf(buf + offset, PAGE_SIZE - offset, "%u,%u,",
 			chip->tsl2772_device_lux[i].ch0,
 			chip->tsl2772_device_lux[i].ch1);
 		if (chip->tsl2772_device_lux[i].ch0 == 0) {
@@ -1000,7 +1000,7 @@ static ssize_t in_illuminance0_lux_table_show(struct device *dev,
 		i++;
 	}
 
-	offset += snprintf(buf + offset, PAGE_SIZE, "\n");
+	offset += scnprintf(buf + offset, PAGE_SIZE - offset, "\n");
 	return offset;
 }
 
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index ec803c1e81df..985cc39ede8e 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -83,6 +83,7 @@ struct vcnl4000_data {
 	struct mutex vcnl4000_lock;
 	struct vcnl4200_channel vcnl4200_al;
 	struct vcnl4200_channel vcnl4200_ps;
+	uint32_t near_level;
 };
 
 struct vcnl4000_chip_spec {
@@ -343,6 +344,25 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
 	},
 };
 
+static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
+					uintptr_t priv,
+					const struct iio_chan_spec *chan,
+					char *buf)
+{
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	return sprintf(buf, "%u\n", data->near_level);
+}
+
+static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
+	{
+		.name = "nearlevel",
+		.shared = IIO_SEPARATE,
+		.read = vcnl4000_read_near_level,
+	},
+	{ /* sentinel */ }
+};
+
 static const struct iio_chan_spec vcnl4000_channels[] = {
 	{
 		.type = IIO_LIGHT,
@@ -351,6 +371,7 @@ static const struct iio_chan_spec vcnl4000_channels[] = {
 	}, {
 		.type = IIO_PROXIMITY,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.ext_info = vcnl4000_ext_info,
 	}
 };
 
@@ -440,6 +461,10 @@ static int vcnl4000_probe(struct i2c_client *client,
 	dev_dbg(&client->dev, "%s Ambient light/proximity sensor, Rev: %02x\n",
 		data->chip_spec->prod, data->rev);
 
+	if (device_property_read_u32(&client->dev, "proximity-near-level",
+				     &data->near_level))
+		data->near_level = 0;
+
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &vcnl4000_info;
 	indio_dev->channels = vcnl4000_channels;
diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c
index d32996702110..372c80c25dd4 100644
--- a/drivers/iio/magnetometer/ak8974.c
+++ b/drivers/iio/magnetometer/ak8974.c
@@ -746,7 +746,12 @@ static int ak8974_probe(struct i2c_client *i2c,
 				      ARRAY_SIZE(ak8974->regs),
 				      ak8974->regs);
 	if (ret < 0) {
-		dev_err(&i2c->dev, "cannot get regulators\n");
+		if (ret != -EPROBE_DEFER)
+			dev_err(&i2c->dev, "cannot get regulators: %d\n", ret);
+		else
+			dev_dbg(&i2c->dev,
+				"regulators unavailable, deferring probe\n");
+
 		return ret;
 	}
 
diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c
index ed9be0490d77..c6ed3ea8460a 100644
--- a/drivers/iio/magnetometer/bmc150_magn_spi.c
+++ b/drivers/iio/magnetometer/bmc150_magn_spi.c
@@ -22,8 +22,8 @@ static int bmc150_magn_spi_probe(struct spi_device *spi)
 
 	regmap = devm_regmap_init_spi(spi, &bmc150_magn_regmap_config);
 	if (IS_ERR(regmap)) {
-		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
-			(int)PTR_ERR(regmap));
+		dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+			regmap);
 		return PTR_ERR(regmap);
 	}
 	return bmc150_magn_probe(&spi->dev, regmap, spi->irq, id->name);
diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c
index 425cdd07b4e5..1787d656d009 100644
--- a/drivers/iio/magnetometer/mmc35240.c
+++ b/drivers/iio/magnetometer/mmc35240.c
@@ -239,7 +239,7 @@ static int mmc35240_init(struct mmc35240_data *data)
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, MMC35240_OTP_START_ADDR,
-			       (u8 *)otp_data, sizeof(otp_data));
+			       otp_data, sizeof(otp_data));
 	if (ret < 0)
 		return ret;
 
@@ -295,7 +295,7 @@ static int mmc35240_read_measurement(struct mmc35240_data *data, __le16 buf[3])
 	if (ret < 0)
 		return ret;
 
-	return regmap_bulk_read(data->regmap, MMC35240_REG_XOUT_L, (u8 *)buf,
+	return regmap_bulk_read(data->regmap, MMC35240_REG_XOUT_L, buf,
 				3 * sizeof(__le16));
 }
 
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index e68184a93a6d..79de721e6015 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -506,8 +506,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 	indio_dev->channels = mdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
-	mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-					&mdata->sensor_settings->fs.fs_avl[0];
+	mdata->current_fullscale = &mdata->sensor_settings->fs.fs_avl[0];
 	mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;
 
 	err = st_sensors_init_sensor(indio_dev, NULL);
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 29c209cc1108..a33048390118 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -337,8 +337,7 @@ static int bmp280_read_temp(struct bmp280_data *data,
 	__be32 tmp = 0;
 	s32 adc_temp, comp_temp;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
-			       (u8 *) &tmp, 3);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, &tmp, 3);
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read temperature\n");
 		return ret;
@@ -377,8 +376,7 @@ static int bmp280_read_press(struct bmp280_data *data,
 	if (ret < 0)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
-			       (u8 *) &tmp, 3);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, &tmp, 3);
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read pressure\n");
 		return ret;
@@ -400,8 +398,8 @@ static int bmp280_read_press(struct bmp280_data *data,
 
 static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
 {
+	__be16 tmp;
 	int ret;
-	__be16 tmp = 0;
 	s32 adc_humidity;
 	u32 comp_humidity;
 
@@ -410,8 +408,7 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
 	if (ret < 0)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB,
-			       (u8 *) &tmp, 2);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, &tmp, 2);
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read humidity\n");
 		return ret;
@@ -575,57 +572,38 @@ static int bmp280_write_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static ssize_t bmp280_show_avail(char *buf, const int *vals, const int n)
+static int bmp280_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
 {
-	size_t len = 0;
-	int i;
-
-	for (i = 0; i < n; i++)
-		len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", vals[i]);
-
-	buf[len - 1] = '\n';
-
-	return len;
-}
-
-static ssize_t bmp280_show_temp_oversampling_avail(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
-
-	return bmp280_show_avail(buf, data->chip_info->oversampling_temp_avail,
-				 data->chip_info->num_oversampling_temp_avail);
-}
-
-static ssize_t bmp280_show_press_oversampling_avail(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
+	struct bmp280_data *data = iio_priv(indio_dev);
 
-	return bmp280_show_avail(buf, data->chip_info->oversampling_press_avail,
-				 data->chip_info->num_oversampling_press_avail);
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		switch (chan->type) {
+		case IIO_PRESSURE:
+			*vals = data->chip_info->oversampling_press_avail;
+			*length = data->chip_info->num_oversampling_press_avail;
+			break;
+		case IIO_TEMP:
+			*vals = data->chip_info->oversampling_temp_avail;
+			*length = data->chip_info->num_oversampling_temp_avail;
+			break;
+		default:
+			return -EINVAL;
+		}
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
 }
 
-static IIO_DEVICE_ATTR(in_temp_oversampling_ratio_available,
-	S_IRUGO, bmp280_show_temp_oversampling_avail, NULL, 0);
-
-static IIO_DEVICE_ATTR(in_pressure_oversampling_ratio_available,
-	S_IRUGO, bmp280_show_press_oversampling_avail, NULL, 0);
-
-static struct attribute *bmp280_attributes[] = {
-	&iio_dev_attr_in_temp_oversampling_ratio_available.dev_attr.attr,
-	&iio_dev_attr_in_pressure_oversampling_ratio_available.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group bmp280_attrs_group = {
-	.attrs = bmp280_attributes,
-};
-
 static const struct iio_info bmp280_info = {
 	.read_raw = &bmp280_read_raw,
+	.read_avail = &bmp280_read_avail,
 	.write_raw = &bmp280_write_raw,
-	.attrs = &bmp280_attrs_group,
 };
 
 static int bmp280_chip_config(struct bmp280_data *data)
@@ -713,7 +691,7 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
 	unsigned int ctrl;
 
 	if (data->use_eoc)
-		init_completion(&data->done);
+		reinit_completion(&data->done);
 
 	ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
 	if (ret)
@@ -752,14 +730,14 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
 
 static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
 {
+	__be16 tmp;
 	int ret;
-	__be16 tmp = 0;
 
 	ret = bmp180_measure(data, BMP180_MEAS_TEMP);
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 2);
+	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 2);
 	if (ret)
 		return ret;
 
@@ -856,7 +834,7 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 3);
+	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 3);
 	if (ret)
 		return ret;
 
@@ -965,10 +943,12 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
 
 	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
 	if (irq_trig != IRQF_TRIGGER_RISING) {
-		dev_err(dev, "non-rising trigger given for EOC interrupt, "
-			"trying to enforce it\n");
+		dev_err(dev, "non-rising trigger given for EOC interrupt, trying to enforce it\n");
 		irq_trig = IRQF_TRIGGER_RISING;
 	}
+
+	init_completion(&data->done);
+
 	ret = devm_request_threaded_irq(dev,
 			irq,
 			bmp085_eoc_irq,
@@ -1082,9 +1062,9 @@ int bmp280_common_probe(struct device *dev,
 	usleep_range(data->start_up_time, data->start_up_time + 100);
 
 	/* Bring chip out of reset if there is an assigned GPIO line */
-	gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	/* Deassert the signal */
-	if (!IS_ERR(gpiod)) {
+	if (gpiod) {
 		dev_info(dev, "release reset\n");
 		gpiod_set_value(gpiod, 0);
 	}
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index bd972cec4830..789a2928504a 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -683,8 +683,7 @@ EXPORT_SYMBOL(st_press_get_settings);
 int st_press_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *press_data = iio_priv(indio_dev);
-	struct st_sensors_platform_data *pdata =
-		(struct st_sensors_platform_data *)press_data->dev->platform_data;
+	struct st_sensors_platform_data *pdata = dev_get_platdata(press_data->dev);
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -708,9 +707,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 	indio_dev->channels = press_data->sensor_settings->ch;
 	indio_dev->num_channels = press_data->sensor_settings->num_ch;
 
-	press_data->current_fullscale =
-		(struct st_sensor_fullscale_avl *)
-			&press_data->sensor_settings->fs.fs_avl[0];
+	press_data->current_fullscale = &press_data->sensor_settings->fs.fs_avl[0];
 
 	press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
 
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index 37606d400805..d57e8cc17e42 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -101,6 +101,19 @@ config SRF04
 	  To compile this driver as a module, choose M here: the
 	  module will be called srf04.
 
+config SX9310
+	tristate "SX9310/SX9311 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive
+	  proximity/button sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9310.
+
 config SX9500
 	tristate "SX9500 Semtech proximity sensor"
 	select IIO_BUFFER
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
index c591b019304e..25e5a04da101 100644
--- a/drivers/iio/proximity/Makefile
+++ b/drivers/iio/proximity/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_PING)		+= ping.o
 obj-$(CONFIG_RFD77402)		+= rfd77402.o
 obj-$(CONFIG_SRF04)		+= srf04.o
 obj-$(CONFIG_SRF08)		+= srf08.o
+obj-$(CONFIG_SX9310)		+= sx9310.o
 obj-$(CONFIG_SX9500)		+= sx9500.o
 obj-$(CONFIG_VL53L0X_I2C)	+= vl53l0x-i2c.o
 
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
new file mode 100644
index 000000000000..d161f3061e35
--- /dev/null
+++ b/drivers/iio/proximity/sx9310.c
@@ -0,0 +1,1069 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 Google LLC.
+ *
+ * Driver for Semtech's SX9310/SX9311 capacitive proximity/button solution.
+ * Based on SX9500 driver and Semtech driver using the input framework
+ * <https://my.syncplicity.com/share/teouwsim8niiaud/
+ *          linux-driver-SX9310_NoSmartHSensing>.
+ * Reworked April 2019 by Evan Green <evgreen@chromium.org>
+ * and January 2020 by Daniel Campello <campello@chromium.org>
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+/* Register definitions. */
+#define SX9310_REG_IRQ_SRC				0x00
+#define SX9310_REG_STAT0				0x01
+#define SX9310_REG_STAT1				0x02
+#define SX9310_REG_IRQ_MSK				0x03
+#define   SX9310_CONVDONE_IRQ				BIT(3)
+#define   SX9310_FAR_IRQ				BIT(5)
+#define   SX9310_CLOSE_IRQ				BIT(6)
+#define   SX9310_EVENT_IRQ				(SX9310_FAR_IRQ | \
+							 SX9310_CLOSE_IRQ)
+#define SX9310_REG_IRQ_FUNC				0x04
+
+#define SX9310_REG_PROX_CTRL0				0x10
+#define   SX9310_REG_PROX_CTRL0_PROXSTAT2		0x10
+#define   SX9310_REG_PROX_CTRL0_EN_MASK			0x0F
+#define SX9310_REG_PROX_CTRL1				0x11
+#define SX9310_REG_PROX_CTRL2				0x12
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_ALL		0x80
+#define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	0x04
+#define SX9310_REG_PROX_CTRL3				0x13
+#define   SX9310_REG_PROX_CTRL3_GAIN0_X8		0x0c
+#define   SX9310_REG_PROX_CTRL3_GAIN12_X4		0x02
+#define SX9310_REG_PROX_CTRL4				0x14
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST	0x07
+#define SX9310_REG_PROX_CTRL5				0x15
+#define   SX9310_REG_PROX_CTRL5_RANGE_SMALL		0xc0
+#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1		0x04
+#define   SX9310_REG_PROX_CTRL5_RAWFILT_1P25		0x02
+#define SX9310_REG_PROX_CTRL6				0x16
+#define   SX9310_REG_PROX_CTRL6_COMP_COMMON		0x20
+#define SX9310_REG_PROX_CTRL7				0x17
+#define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		0x08
+#define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_512		0x05
+#define SX9310_REG_PROX_CTRL8				0x18
+#define SX9310_REG_PROX_CTRL9				0x19
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH12_28		0x40
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96		0x88
+#define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900	0x03
+#define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500	0x05
+#define SX9310_REG_PROX_CTRL10				0x1a
+#define   SX9310_REG_PROX_CTRL10_HYST_6PCT		0x10
+#define   SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8	0x12
+#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8		0x03
+#define SX9310_REG_PROX_CTRL11				0x1b
+#define SX9310_REG_PROX_CTRL12				0x1c
+#define SX9310_REG_PROX_CTRL13				0x1d
+#define SX9310_REG_PROX_CTRL14				0x1e
+#define SX9310_REG_PROX_CTRL15				0x1f
+#define SX9310_REG_PROX_CTRL16				0x20
+#define SX9310_REG_PROX_CTRL17				0x21
+#define SX9310_REG_PROX_CTRL18				0x22
+#define SX9310_REG_PROX_CTRL19				0x23
+#define SX9310_REG_SAR_CTRL0				0x2a
+#define   SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES		0x40
+#define   SX9310_REG_SAR_CTRL0_SARHYST_8		0x10
+#define SX9310_REG_SAR_CTRL1				0x2b
+/* Each increment of the slope register is 0.0078125. */
+#define   SX9310_REG_SAR_CTRL1_SLOPE(_hnslope)		(_hnslope / 78125)
+#define SX9310_REG_SAR_CTRL2				0x2c
+#define   SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT	0x3c
+
+#define SX9310_REG_SENSOR_SEL				0x30
+
+#define SX9310_REG_USE_MSB				0x31
+#define SX9310_REG_USE_LSB				0x32
+
+#define SX9310_REG_AVG_MSB				0x33
+#define SX9310_REG_AVG_LSB				0x34
+
+#define SX9310_REG_DIFF_MSB				0x35
+#define SX9310_REG_DIFF_LSB				0x36
+
+#define SX9310_REG_OFFSET_MSB				0x37
+#define SX9310_REG_OFFSET_LSB				0x38
+
+#define SX9310_REG_SAR_MSB				0x39
+#define SX9310_REG_SAR_LSB				0x3a
+
+#define SX9310_REG_I2CADDR				0x40
+#define SX9310_REG_PAUSE				0x41
+#define SX9310_REG_WHOAMI				0x42
+#define   SX9310_WHOAMI_VALUE				0x01
+#define   SX9311_WHOAMI_VALUE				0x02
+
+#define SX9310_REG_RESET				0x7f
+#define   SX9310_SOFT_RESET				0xde
+
+#define SX9310_SCAN_PERIOD_MASK				GENMASK(7, 4)
+#define SX9310_SCAN_PERIOD_SHIFT			4
+
+#define SX9310_COMPSTAT_MASK				GENMASK(3, 0)
+
+/* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
+#define SX9310_NUM_CHANNELS				4
+#define SX9310_CHAN_ENABLED_MASK			GENMASK(3, 0)
+
+struct sx9310_data {
+	/* Serialize access to registers and channel configuration */
+	struct mutex mutex;
+	struct i2c_client *client;
+	struct iio_trigger *trig;
+	struct regmap *regmap;
+	/*
+	 * Last reading of the proximity status for each channel.
+	 * We only send an event to user space when this changes.
+	 */
+	bool prox_stat[SX9310_NUM_CHANNELS];
+	bool trigger_enabled;
+	__be16 buffer[SX9310_NUM_CHANNELS +
+		      4]; /* 64-bit data + 64-bit timestamp */
+	/* Remember enabled channels and sample rate during suspend. */
+	unsigned int suspend_ctrl0;
+	struct completion completion;
+	unsigned int chan_read, chan_event;
+	int channel_users[SX9310_NUM_CHANNELS];
+	int whoami;
+};
+
+static const struct iio_event_spec sx9310_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+#define SX9310_NAMED_CHANNEL(idx, name)					 \
+	{								 \
+		.type = IIO_PROXIMITY,					 \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		 \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.indexed = 1,						 \
+		.channel = idx,						 \
+		.extend_name = name,					 \
+		.address = SX9310_REG_DIFF_MSB,				 \
+		.event_spec = sx9310_events,				 \
+		.num_event_specs = ARRAY_SIZE(sx9310_events),		 \
+		.scan_index = idx,					 \
+		.scan_type = {						 \
+			.sign = 's',					 \
+			.realbits = 12,					 \
+			.storagebits = 16,				 \
+			.endianness = IIO_BE,				 \
+		},							 \
+	}
+#define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL)
+
+static const struct iio_chan_spec sx9310_channels[] = {
+	SX9310_CHANNEL(0),			/* CS0 */
+	SX9310_CHANNEL(1),			/* CS1 */
+	SX9310_CHANNEL(2),			/* CS2 */
+	SX9310_NAMED_CHANNEL(3, "comb"),	/* COMB */
+
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+/*
+ * Each entry contains the integer part (val) and the fractional part, in micro
+ * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO.
+ */
+static const struct {
+	int val;
+	int val2;
+} sx9310_samp_freq_table[] = {
+	{ 500, 0 }, /* 0000: Min (no idle time) */
+	{ 66, 666666 }, /* 0001: 15 ms */
+	{ 33, 333333 }, /* 0010: 30 ms (Typ.) */
+	{ 22, 222222 }, /* 0011: 45 ms */
+	{ 16, 666666 }, /* 0100: 60 ms */
+	{ 11, 111111 }, /* 0101: 90 ms */
+	{ 8, 333333 }, /* 0110: 120 ms */
+	{ 5, 0 }, /* 0111: 200 ms */
+	{ 2, 500000 }, /* 1000: 400 ms */
+	{ 1, 666666 }, /* 1001: 600 ms */
+	{ 1, 250000 }, /* 1010: 800 ms */
+	{ 1, 0 }, /* 1011: 1 s */
+	{ 0, 500000 }, /* 1100: 2 s */
+	{ 0, 333333 }, /* 1101: 3 s */
+	{ 0, 250000 }, /* 1110: 4 s */
+	{ 0, 200000 }, /* 1111: 5 s */
+};
+static const unsigned int sx9310_scan_period_table[] = {
+	2,   15,  30,  45,   60,   90,	 120,  200,
+	400, 600, 800, 1000, 2000, 3000, 4000, 5000,
+};
+
+static ssize_t sx9310_show_samp_freq_avail(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	size_t len = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%d ",
+				 sx9310_samp_freq_table[i].val,
+				 sx9310_samp_freq_table[i].val2);
+	buf[len - 1] = '\n';
+	return len;
+}
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sx9310_show_samp_freq_avail);
+
+static const struct regmap_range sx9310_writable_reg_ranges[] = {
+	regmap_reg_range(SX9310_REG_IRQ_MSK, SX9310_REG_IRQ_FUNC),
+	regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
+	regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
+	regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SENSOR_SEL),
+	regmap_reg_range(SX9310_REG_OFFSET_MSB, SX9310_REG_OFFSET_LSB),
+	regmap_reg_range(SX9310_REG_PAUSE, SX9310_REG_PAUSE),
+	regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
+};
+
+static const struct regmap_access_table sx9310_writeable_regs = {
+	.yes_ranges = sx9310_writable_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9310_writable_reg_ranges),
+};
+
+static const struct regmap_range sx9310_readable_reg_ranges[] = {
+	regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_IRQ_FUNC),
+	regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
+	regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
+	regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB),
+	regmap_reg_range(SX9310_REG_I2CADDR, SX9310_REG_WHOAMI),
+	regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
+};
+
+static const struct regmap_access_table sx9310_readable_regs = {
+	.yes_ranges = sx9310_readable_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9310_readable_reg_ranges),
+};
+
+static const struct regmap_range sx9310_volatile_reg_ranges[] = {
+	regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_STAT1),
+	regmap_reg_range(SX9310_REG_USE_MSB, SX9310_REG_DIFF_LSB),
+	regmap_reg_range(SX9310_REG_SAR_MSB, SX9310_REG_SAR_LSB),
+	regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
+};
+
+static const struct regmap_access_table sx9310_volatile_regs = {
+	.yes_ranges = sx9310_volatile_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9310_volatile_reg_ranges),
+};
+
+static const struct regmap_config sx9310_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SX9310_REG_RESET,
+	.cache_type = REGCACHE_RBTREE,
+
+	.wr_table = &sx9310_writeable_regs,
+	.rd_table = &sx9310_readable_regs,
+	.volatile_table = &sx9310_volatile_regs,
+};
+
+static int sx9310_update_chan_en(struct sx9310_data *data,
+				 unsigned int chan_read,
+				 unsigned int chan_event)
+{
+	int ret;
+
+	if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
+		ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
+					 SX9310_CHAN_ENABLED_MASK,
+					 chan_read | chan_event);
+		if (ret)
+			return ret;
+	}
+	data->chan_read = chan_read;
+	data->chan_event = chan_event;
+	return 0;
+}
+
+static int sx9310_get_read_channel(struct sx9310_data *data, int channel)
+{
+	return sx9310_update_chan_en(data, data->chan_read | BIT(channel),
+				     data->chan_event);
+}
+
+static int sx9310_put_read_channel(struct sx9310_data *data, int channel)
+{
+	return sx9310_update_chan_en(data, data->chan_read & ~BIT(channel),
+				     data->chan_event);
+}
+
+static int sx9310_get_event_channel(struct sx9310_data *data, int channel)
+{
+	return sx9310_update_chan_en(data, data->chan_read,
+				     data->chan_event | BIT(channel));
+}
+
+static int sx9310_put_event_channel(struct sx9310_data *data, int channel)
+{
+	return sx9310_update_chan_en(data, data->chan_read,
+				     data->chan_event & ~BIT(channel));
+}
+
+static int sx9310_enable_irq(struct sx9310_data *data, unsigned int irq)
+{
+	return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, irq);
+}
+
+static int sx9310_disable_irq(struct sx9310_data *data, unsigned int irq)
+{
+	return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, 0);
+}
+
+static int sx9310_read_prox_data(struct sx9310_data *data,
+				 const struct iio_chan_spec *chan, __be16 *val)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel);
+	if (ret < 0)
+		return ret;
+
+	return regmap_bulk_read(data->regmap, chan->address, val, 2);
+}
+
+/*
+ * If we have no interrupt support, we have to wait for a scan period
+ * after enabling a channel to get a result.
+ */
+static int sx9310_wait_for_sample(struct sx9310_data *data)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val);
+	if (ret < 0)
+		return ret;
+
+	val = (val & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+
+	msleep(sx9310_scan_period_table[val]);
+
+	return 0;
+}
+
+static int sx9310_read_proximity(struct sx9310_data *data,
+				 const struct iio_chan_spec *chan, int *val)
+{
+	int ret = 0;
+	__be16 rawval;
+
+	mutex_lock(&data->mutex);
+
+	ret = sx9310_get_read_channel(data, chan->channel);
+	if (ret < 0)
+		goto out;
+
+	ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
+	if (ret < 0)
+		goto out_put_channel;
+
+	mutex_unlock(&data->mutex);
+
+	if (data->client->irq > 0) {
+		ret = wait_for_completion_interruptible(&data->completion);
+		reinit_completion(&data->completion);
+	} else {
+		ret = sx9310_wait_for_sample(data);
+	}
+
+	mutex_lock(&data->mutex);
+
+	if (ret < 0)
+		goto out_disable_irq;
+
+	ret = sx9310_read_prox_data(data, chan, &rawval);
+	if (ret < 0)
+		goto out_disable_irq;
+
+	*val = sign_extend32(be16_to_cpu(rawval),
+			     (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
+
+	ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+	if (ret < 0)
+		goto out_put_channel;
+
+	ret = sx9310_put_read_channel(data, chan->channel);
+	if (ret < 0)
+		goto out;
+
+	mutex_unlock(&data->mutex);
+
+	return IIO_VAL_INT;
+
+out_disable_irq:
+	sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+out_put_channel:
+	sx9310_put_read_channel(data, chan->channel);
+out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
+{
+	unsigned int regval;
+	int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
+
+	if (ret < 0)
+		return ret;
+
+	regval = (regval & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+	*val = sx9310_samp_freq_table[regval].val;
+	*val2 = sx9310_samp_freq_table[regval].val2;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int sx9310_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan, int *val,
+			   int *val2, long mask)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx9310_read_proximity(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9310_read_samp_freq(data, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
+		if (val == sx9310_samp_freq_table[i].val &&
+		    val2 == sx9310_samp_freq_table[i].val2)
+			break;
+
+	if (i == ARRAY_SIZE(sx9310_samp_freq_table))
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
+				 SX9310_SCAN_PERIOD_MASK,
+				 i << SX9310_SCAN_PERIOD_SHIFT);
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9310_write_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan, int val, int val2,
+			    long mask)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+		return -EINVAL;
+
+	return sx9310_set_samp_freq(data, val, val2);
+}
+
+static irqreturn_t sx9310_irq_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct sx9310_data *data = iio_priv(indio_dev);
+
+	if (data->trigger_enabled)
+		iio_trigger_poll(data->trig);
+
+	/*
+	 * Even if no event is enabled, we need to wake the thread to
+	 * clear the interrupt state by reading SX9310_REG_IRQ_SRC.  It
+	 * is not possible to do that here because regmap_read takes a
+	 * mutex.
+	 */
+	return IRQ_WAKE_THREAD;
+}
+
+static void sx9310_push_events(struct iio_dev *indio_dev)
+{
+	int ret;
+	unsigned int val, chan;
+	struct sx9310_data *data = iio_priv(indio_dev);
+	s64 timestamp = iio_get_time_ns(indio_dev);
+
+	/* Read proximity state on all channels */
+	ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "i2c transfer error in irq\n");
+		return;
+	}
+
+	for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
+		int dir;
+		u64 ev;
+		bool new_prox = val & BIT(chan);
+
+		if (!(data->chan_event & BIT(chan)))
+			continue;
+		if (new_prox == data->prox_stat[chan])
+			/* No change on this channel. */
+			continue;
+
+		dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+		ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
+					  IIO_EV_TYPE_THRESH, dir);
+
+		iio_push_event(indio_dev, ev, timestamp);
+		data->prox_stat[chan] = new_prox;
+	}
+}
+
+static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct sx9310_data *data = iio_priv(indio_dev);
+	int ret;
+	unsigned int val;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "i2c transfer error in irq\n");
+		goto out;
+	}
+
+	if (val & SX9310_EVENT_IRQ)
+		sx9310_push_events(indio_dev);
+
+	if (val & SX9310_CONVDONE_IRQ)
+		complete(&data->completion);
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static int sx9310_read_event_config(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+
+	return !!(data->chan_event & BIT(chan->channel));
+}
+
+static int sx9310_write_event_config(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir, int state)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+	int ret;
+
+	/* If the state hasn't changed, there's nothing to do. */
+	if (!!(data->chan_event & BIT(chan->channel)) == state)
+		return 0;
+
+	mutex_lock(&data->mutex);
+	if (state) {
+		ret = sx9310_get_event_channel(data, chan->channel);
+		if (ret < 0)
+			goto out_unlock;
+		if (!(data->chan_event & ~BIT(chan->channel))) {
+			ret = sx9310_enable_irq(data, SX9310_EVENT_IRQ);
+			if (ret < 0)
+				sx9310_put_event_channel(data, chan->channel);
+		}
+	} else {
+		ret = sx9310_put_event_channel(data, chan->channel);
+		if (ret < 0)
+			goto out_unlock;
+		if (!data->chan_event) {
+			ret = sx9310_disable_irq(data, SX9310_EVENT_IRQ);
+			if (ret < 0)
+				sx9310_get_event_channel(data, chan->channel);
+		}
+	}
+
+out_unlock:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static struct attribute *sx9310_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group sx9310_attribute_group = {
+	.attrs = sx9310_attributes,
+};
+
+static const struct iio_info sx9310_info = {
+	.attrs = &sx9310_attribute_group,
+	.read_raw = sx9310_read_raw,
+	.write_raw = sx9310_write_raw,
+	.read_event_config = sx9310_read_event_config,
+	.write_event_config = sx9310_write_event_config,
+};
+
+static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct sx9310_data *data = iio_priv(indio_dev);
+	int ret = 0;
+
+	mutex_lock(&data->mutex);
+
+	if (state)
+		ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
+	else if (!data->chan_read)
+		ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+	if (ret < 0)
+		goto out;
+
+	data->trigger_enabled = state;
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static const struct iio_trigger_ops sx9310_trigger_ops = {
+	.set_trigger_state = sx9310_set_trigger_state,
+};
+
+static irqreturn_t sx9310_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct sx9310_data *data = iio_priv(indio_dev);
+	__be16 val;
+	int bit, ret, i = 0;
+
+	mutex_lock(&data->mutex);
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		ret = sx9310_read_prox_data(data, &indio_dev->channels[bit],
+					    &val);
+		if (ret < 0)
+			goto out;
+
+		data->buffer[i++] = val;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+					   pf->timestamp);
+
+out:
+	mutex_unlock(&data->mutex);
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+	unsigned int channels = 0;
+	int bit, ret;
+
+	mutex_lock(&data->mutex);
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength)
+		channels |= BIT(indio_dev->channels[bit].channel);
+
+	ret = sx9310_update_chan_en(data, channels, data->chan_event);
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int sx9310_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = sx9310_update_chan_en(data, 0, data->chan_event);
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static const struct iio_buffer_setup_ops sx9310_buffer_setup_ops = {
+	.preenable = sx9310_buffer_preenable,
+	.postenable = iio_triggered_buffer_postenable,
+	.predisable = iio_triggered_buffer_predisable,
+	.postdisable = sx9310_buffer_postdisable,
+};
+
+struct sx9310_reg_default {
+	u8 reg;
+	u8 def;
+};
+
+#define SX_INIT(_reg, _def)			\
+	{					\
+		.reg = SX9310_REG_##_reg,	\
+		.def = _def,			\
+	}
+
+static const struct sx9310_reg_default sx9310_default_regs[] = {
+	SX_INIT(IRQ_MSK, 0x00),
+	SX_INIT(IRQ_FUNC, 0x00),
+	/*
+	 * The lower 4 bits should not be set as it enable sensors measurements.
+	 * Turning the detection on before the configuration values are set to
+	 * good values can cause the device to return erroneous readings.
+	 */
+	SX_INIT(PROX_CTRL0, SX9310_REG_PROX_CTRL0_PROXSTAT2),
+	SX_INIT(PROX_CTRL1, 0x00),
+	SX_INIT(PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_ALL |
+			    SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC),
+	SX_INIT(PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
+			    SX9310_REG_PROX_CTRL3_GAIN12_X4),
+	SX_INIT(PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST),
+	SX_INIT(PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
+			    SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
+			    SX9310_REG_PROX_CTRL5_RAWFILT_1P25),
+	SX_INIT(PROX_CTRL6, SX9310_REG_PROX_CTRL6_COMP_COMMON),
+	SX_INIT(PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
+			    SX9310_REG_PROX_CTRL7_AVGPOSFILT_512),
+	SX_INIT(PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
+			    SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500),
+	SX_INIT(PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 |
+			    SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900),
+	SX_INIT(PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
+			     SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 |
+			     SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8),
+	SX_INIT(PROX_CTRL11, 0x00),
+	SX_INIT(PROX_CTRL12, 0x00),
+	SX_INIT(PROX_CTRL13, 0x00),
+	SX_INIT(PROX_CTRL14, 0x00),
+	SX_INIT(PROX_CTRL15, 0x00),
+	SX_INIT(PROX_CTRL16, 0x00),
+	SX_INIT(PROX_CTRL17, 0x00),
+	SX_INIT(PROX_CTRL18, 0x00),
+	SX_INIT(PROX_CTRL19, 0x00),
+	SX_INIT(SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
+			   SX9310_REG_SAR_CTRL0_SARHYST_8),
+	SX_INIT(SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250)),
+	SX_INIT(SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT),
+};
+
+/* Activate all channels and perform an initial compensation. */
+static int sx9310_init_compensation(struct iio_dev *indio_dev)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+	int i, ret;
+	unsigned int val;
+	unsigned int ctrl0;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0);
+	if (ret < 0)
+		return ret;
+
+	/* run the compensation phase on all channels */
+	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
+			   ctrl0 | SX9310_REG_PROX_CTRL0_EN_MASK);
+	if (ret < 0)
+		return ret;
+
+	for (i = 100; i >= 0; i--) {
+		msleep(20);
+		ret = regmap_read(data->regmap, SX9310_REG_STAT1, &val);
+		if (ret < 0)
+			goto out;
+		if (!(val & SX9310_COMPSTAT_MASK))
+			break;
+	}
+
+	if (i < 0) {
+		dev_err(&data->client->dev,
+			"initial compensation timed out: 0x%02x", val);
+		ret = -ETIMEDOUT;
+	}
+
+out:
+	regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
+	return ret;
+}
+
+static int sx9310_init_device(struct iio_dev *indio_dev)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+	const struct sx9310_reg_default *initval;
+	int ret;
+	unsigned int i, val;
+
+	ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(1000, 2000); /* power-up time is ~1ms. */
+
+	/* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */
+	ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
+	if (ret < 0)
+		return ret;
+
+	/* Program some sane defaults. */
+	for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
+		initval = &sx9310_default_regs[i];
+		ret = regmap_write(data->regmap, initval->reg, initval->def);
+		if (ret < 0)
+			return ret;
+	}
+
+	return sx9310_init_compensation(indio_dev);
+}
+
+static int sx9310_set_indio_dev_name(struct device *dev,
+				     struct iio_dev *indio_dev,
+				     const struct i2c_device_id *id, int whoami)
+{
+	const struct acpi_device_id *acpi_id;
+
+	/* id will be NULL when enumerated via ACPI */
+	if (id) {
+		if (id->driver_data != whoami)
+			dev_err(dev, "WHOAMI does not match i2c_device_id: %s",
+				id->name);
+	} else if (ACPI_HANDLE(dev)) {
+		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+		if (!acpi_id)
+			return -ENODEV;
+		if (acpi_id->driver_data != whoami)
+			dev_err(dev, "WHOAMI does not match acpi_device_id: %s",
+				acpi_id->id);
+	} else
+		return -ENODEV;
+
+	switch (whoami) {
+	case SX9310_WHOAMI_VALUE:
+		indio_dev->name = "sx9310";
+		break;
+	case SX9311_WHOAMI_VALUE:
+		indio_dev->name = "sx9311";
+		break;
+	default:
+		dev_err(dev, "unexpected WHOAMI response: %u", whoami);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int sx9310_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct iio_dev *indio_dev;
+	struct sx9310_data *data;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->mutex);
+	init_completion(&data->completion);
+
+	data->regmap = devm_regmap_init_i2c(client, &sx9310_regmap_config);
+	if (IS_ERR(data->regmap))
+		return PTR_ERR(data->regmap);
+
+	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
+	if (ret < 0) {
+		dev_err(&client->dev, "error in reading WHOAMI register: %d",
+			ret);
+		return ret;
+	}
+
+	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, id,
+					data->whoami);
+	if (ret < 0)
+		return ret;
+
+	ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = sx9310_channels;
+	indio_dev->num_channels = ARRAY_SIZE(sx9310_channels);
+	indio_dev->info = &sx9310_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	i2c_set_clientdata(client, indio_dev);
+
+	ret = sx9310_init_device(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						sx9310_irq_handler,
+						sx9310_irq_thread_handler,
+						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						"sx9310_event", indio_dev);
+		if (ret < 0)
+			return ret;
+
+		data->trig =
+			devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
+					       indio_dev->name, indio_dev->id);
+		if (!data->trig)
+			return -ENOMEM;
+
+		data->trig->dev.parent = &client->dev;
+		data->trig->ops = &sx9310_trigger_ops;
+		iio_trigger_set_drvdata(data->trig, indio_dev);
+
+		ret = devm_iio_trigger_register(&client->dev, data->trig);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
+					      iio_pollfunc_store_time,
+					      sx9310_trigger_handler,
+					      &sx9310_buffer_setup_ops);
+	if (ret < 0)
+		return ret;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static int __maybe_unused sx9310_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct sx9310_data *data = iio_priv(indio_dev);
+	u8 ctrl0;
+	int ret;
+
+	disable_irq_nosync(data->client->irq);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
+			  &data->suspend_ctrl0);
+
+	if (ret)
+		goto out;
+
+	ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_EN_MASK;
+	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 0);
+
+out:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int __maybe_unused sx9310_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct sx9310_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
+			   data->suspend_ctrl0);
+
+out:
+	mutex_unlock(&data->mutex);
+
+	enable_irq(data->client->irq);
+
+	return ret;
+}
+
+static const struct dev_pm_ops sx9310_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sx9310_suspend, sx9310_resume)
+};
+
+static const struct acpi_device_id sx9310_acpi_match[] = {
+	{ "STH9310", SX9310_WHOAMI_VALUE },
+	{ "STH9311", SX9311_WHOAMI_VALUE },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
+
+static const struct of_device_id sx9310_of_match[] = {
+	{ .compatible = "semtech,sx9310" },
+	{ .compatible = "semtech,sx9311" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sx9310_of_match);
+
+static const struct i2c_device_id sx9310_id[] = {
+	{ "sx9310", SX9310_WHOAMI_VALUE },
+	{ "sx9311", SX9311_WHOAMI_VALUE },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, sx9310_id);
+
+static struct i2c_driver sx9310_driver = {
+	.driver = {
+		.name	= "sx9310",
+		.acpi_match_table = ACPI_PTR(sx9310_acpi_match),
+		.of_match_table = of_match_ptr(sx9310_of_match),
+		.pm = &sx9310_pm_ops,
+	},
+	.probe		= sx9310_probe,
+	.id_table	= sx9310_id,
+};
+module_i2c_driver(sx9310_driver);
+
+MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
+MODULE_AUTHOR("Daniel Campello <campello@chromium.org>");
+MODULE_DESCRIPTION("Driver for Semtech SX9310/SX9311 proximity sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
index d39c0d6b77f1..8976e8d59826 100644
--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -390,8 +390,8 @@ static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
 	 * For custom steinhart, the full u32 is taken. For all the others
 	 * the MSB is discarded.
 	 */
-	const u8 n_size = (is_steinhart == true) ? 4 : 3;
-	const u8 e_size = (is_steinhart == true) ? sizeof(u32) : sizeof(u64);
+	const u8 n_size = is_steinhart ? 4 : 3;
+	const u8 e_size = is_steinhart ? sizeof(u32) : sizeof(u64);
 
 	n_entries = of_property_count_elems_of_size(np, propname, e_size);
 	/* n_entries must be an even number */
diff --git a/drivers/iio/trigger/iio-trig-hrtimer.c b/drivers/iio/trigger/iio-trig-hrtimer.c
index a5e670726717..f59bf8d58586 100644
--- a/drivers/iio/trigger/iio-trig-hrtimer.c
+++ b/drivers/iio/trigger/iio-trig-hrtimer.c
@@ -4,7 +4,7 @@
  *
  * Copyright (C) Intuitive Aerial AB
  * Written by Marten Svanfeldt, marten@intuitiveaerial.com
- * Copyright (C) 2012, Analog Device Inc.
+ * Copyright (C) 2012, Analog Devices Inc.
  *	Author: Lars-Peter Clausen <lars@metafoo.de>
  * Copyright (C) 2015, Intel Corporation
  */
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 4794113ecd59..17f14e0eafe4 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -862,7 +862,7 @@ static struct cm_id_private *cm_alloc_id_priv(struct ib_device *device,
 
 	ret = xa_alloc_cyclic_irq(&cm.local_id_table, &id, NULL, xa_limit_32b,
 				  &cm.local_id_next, GFP_KERNEL);
-	if (ret)
+	if (ret < 0)
 		goto error;
 	cm_id_priv->id.local_id = (__force __be32)id ^ cm.random_id_operand;
 
@@ -1828,11 +1828,9 @@ static void cm_format_mra(struct cm_mra_msg *mra_msg,
 
 static void cm_format_rej(struct cm_rej_msg *rej_msg,
 			  struct cm_id_private *cm_id_priv,
-			  enum ib_cm_rej_reason reason,
-			  void *ari,
-			  u8 ari_length,
-			  const void *private_data,
-			  u8 private_data_len)
+			  enum ib_cm_rej_reason reason, void *ari,
+			  u8 ari_length, const void *private_data,
+			  u8 private_data_len, enum ib_cm_state state)
 {
 	lockdep_assert_held(&cm_id_priv->lock);
 
@@ -1840,7 +1838,7 @@ static void cm_format_rej(struct cm_rej_msg *rej_msg,
 	IBA_SET(CM_REJ_REMOTE_COMM_ID, rej_msg,
 		be32_to_cpu(cm_id_priv->id.remote_id));
 
-	switch(cm_id_priv->id.state) {
+	switch (state) {
 	case IB_CM_REQ_RCVD:
 		IBA_SET(CM_REJ_LOCAL_COMM_ID, rej_msg, be32_to_cpu(0));
 		IBA_SET(CM_REJ_MESSAGE_REJECTED, rej_msg, CM_MSG_RESPONSE_REQ);
@@ -1905,8 +1903,9 @@ static void cm_dup_req_handler(struct cm_work *work,
 			      cm_id_priv->private_data_len);
 		break;
 	case IB_CM_TIMEWAIT:
-		cm_format_rej((struct cm_rej_msg *) msg->mad, cm_id_priv,
-			      IB_CM_REJ_STALE_CONN, NULL, 0, NULL, 0);
+		cm_format_rej((struct cm_rej_msg *)msg->mad, cm_id_priv,
+			      IB_CM_REJ_STALE_CONN, NULL, 0, NULL, 0,
+			      IB_CM_TIMEWAIT);
 		break;
 	default:
 		goto unlock;
@@ -2904,6 +2903,7 @@ static int cm_send_rej_locked(struct cm_id_private *cm_id_priv,
 			      u8 ari_length, const void *private_data,
 			      u8 private_data_len)
 {
+	enum ib_cm_state state = cm_id_priv->id.state;
 	struct ib_mad_send_buf *msg;
 	int ret;
 
@@ -2913,7 +2913,7 @@ static int cm_send_rej_locked(struct cm_id_private *cm_id_priv,
 	    (ari && ari_length > IB_CM_REJ_ARI_LENGTH))
 		return -EINVAL;
 
-	switch (cm_id_priv->id.state) {
+	switch (state) {
 	case IB_CM_REQ_SENT:
 	case IB_CM_MRA_REQ_RCVD:
 	case IB_CM_REQ_RCVD:
@@ -2925,7 +2925,8 @@ static int cm_send_rej_locked(struct cm_id_private *cm_id_priv,
 		if (ret)
 			return ret;
 		cm_format_rej((struct cm_rej_msg *)msg->mad, cm_id_priv, reason,
-			      ari, ari_length, private_data, private_data_len);
+			      ari, ari_length, private_data, private_data_len,
+			      state);
 		break;
 	case IB_CM_REP_SENT:
 	case IB_CM_MRA_REP_RCVD:
@@ -2934,7 +2935,8 @@ static int cm_send_rej_locked(struct cm_id_private *cm_id_priv,
 		if (ret)
 			return ret;
 		cm_format_rej((struct cm_rej_msg *)msg->mad, cm_id_priv, reason,
-			      ari, ari_length, private_data, private_data_len);
+			      ari, ari_length, private_data, private_data_len,
+			      state);
 		break;
 	default:
 		pr_debug("%s: local_id %d, cm_id->state: %d\n", __func__,
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 26e6f7df247b..6406a597dfb6 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -91,7 +91,13 @@ const char *__attribute_const__ rdma_reject_msg(struct rdma_cm_id *id,
 }
 EXPORT_SYMBOL(rdma_reject_msg);
 
-bool rdma_is_consumer_reject(struct rdma_cm_id *id, int reason)
+/**
+ * rdma_is_consumer_reject - return true if the consumer rejected the connect
+ *                           request.
+ * @id: Communication identifier that received the REJECT event.
+ * @reason: Value returned in the REJECT event status field.
+ */
+static bool rdma_is_consumer_reject(struct rdma_cm_id *id, int reason)
 {
 	if (rdma_ib_or_roce(id->device, id->port_num))
 		return reason == IB_CM_REJ_CONSUMER_DEFINED;
@@ -102,7 +108,6 @@ bool rdma_is_consumer_reject(struct rdma_cm_id *id, int reason)
 	WARN_ON_ONCE(1);
 	return false;
 }
-EXPORT_SYMBOL(rdma_is_consumer_reject);
 
 const void *rdma_consumer_reject_data(struct rdma_cm_id *id,
 				      struct rdma_cm_event *ev, u8 *data_len)
diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index d0b3d35ad3e4..8abc72d889d1 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -158,11 +158,7 @@ static void *xan_find_marked(struct xarray *xa, unsigned long *indexp,
 	void *entry;
 
 	rcu_read_lock();
-	do {
-		entry = xas_find_marked(&xas, ULONG_MAX, filter);
-		if (xa_is_zero(entry))
-			break;
-	} while (xas_retry(&xas, entry));
+	entry = xas_find_marked(&xas, ULONG_MAX, filter);
 	rcu_read_unlock();
 
 	if (entry) {
diff --git a/drivers/infiniband/core/rdma_core.c b/drivers/infiniband/core/rdma_core.c
index 5128cb16bb48..177333d8bcda 100644
--- a/drivers/infiniband/core/rdma_core.c
+++ b/drivers/infiniband/core/rdma_core.c
@@ -360,7 +360,7 @@ lookup_get_fd_uobject(const struct uverbs_api_object *obj,
 	 * uverbs_uobject_fd_release(), and the caller is expected to ensure
 	 * that release is never done while a call to lookup is possible.
 	 */
-	if (f->f_op != fd_type->fops) {
+	if (f->f_op != fd_type->fops || uobject->ufile != ufile) {
 		fput(f);
 		return ERR_PTR(-EBADF);
 	}
@@ -474,16 +474,15 @@ alloc_begin_fd_uobject(const struct uverbs_api_object *obj,
 	filp = anon_inode_getfile(fd_type->name, fd_type->fops, NULL,
 				  fd_type->flags);
 	if (IS_ERR(filp)) {
+		uverbs_uobject_put(uobj);
 		uobj = ERR_CAST(filp);
-		goto err_uobj;
+		goto err_fd;
 	}
 	uobj->object = filp;
 
 	uobj->id = new_fd;
 	return uobj;
 
-err_uobj:
-	uverbs_uobject_put(uobj);
 err_fd:
 	put_unused_fd(new_fd);
 	return uobj;
@@ -679,7 +678,6 @@ void rdma_lookup_put_uobject(struct ib_uobject *uobj,
 			     enum rdma_lookup_mode mode)
 {
 	assert_uverbs_usecnt(uobj, mode);
-	uobj->uapi_object->type_class->lookup_put(uobj, mode);
 	/*
 	 * In order to unlock an object, either decrease its usecnt for
 	 * read access or zero it in case of exclusive access. See
@@ -696,6 +694,7 @@ void rdma_lookup_put_uobject(struct ib_uobject *uobj,
 		break;
 	}
 
+	uobj->uapi_object->type_class->lookup_put(uobj, mode);
 	/* Pairs with the kref obtained by type->lookup_get */
 	uverbs_uobject_put(uobj);
 }
diff --git a/drivers/infiniband/core/rw.c b/drivers/infiniband/core/rw.c
index 557efbf29197..614cff89fc71 100644
--- a/drivers/infiniband/core/rw.c
+++ b/drivers/infiniband/core/rw.c
@@ -129,7 +129,7 @@ static int rdma_rw_init_mr_wrs(struct rdma_rw_ctx *ctx, struct ib_qp *qp,
 						    qp->integrity_en);
 	int i, j, ret = 0, count = 0;
 
-	ctx->nr_ops = (sg_cnt + pages_per_mr - 1) / pages_per_mr;
+	ctx->nr_ops = DIV_ROUND_UP(sg_cnt, pages_per_mr);
 	ctx->reg = kcalloc(ctx->nr_ops, sizeof(*ctx->reg), GFP_KERNEL);
 	if (!ctx->reg) {
 		ret = -ENOMEM;
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index 74e0058fcf9e..2dd326f2beed 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -1412,17 +1412,13 @@ void ib_sa_pack_path(struct sa_path_rec *rec, void *attribute)
 EXPORT_SYMBOL(ib_sa_pack_path);
 
 static bool ib_sa_opa_pathrecord_support(struct ib_sa_client *client,
-					 struct ib_device *device,
+					 struct ib_sa_device *sa_dev,
 					 u8 port_num)
 {
-	struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client);
 	struct ib_sa_port *port;
 	unsigned long flags;
 	bool ret = false;
 
-	if (!sa_dev)
-		return ret;
-
 	port = &sa_dev->port[port_num - sa_dev->start_port];
 	spin_lock_irqsave(&port->classport_lock, flags);
 	if (!port->classport_info.valid)
@@ -1450,8 +1446,8 @@ enum opa_pr_supported {
  * query is possible.
  */
 static int opa_pr_query_possible(struct ib_sa_client *client,
-				 struct ib_device *device,
-				 u8 port_num,
+				 struct ib_sa_device *sa_dev,
+				 struct ib_device *device, u8 port_num,
 				 struct sa_path_rec *rec)
 {
 	struct ib_port_attr port_attr;
@@ -1459,7 +1455,7 @@ static int opa_pr_query_possible(struct ib_sa_client *client,
 	if (ib_query_port(device, port_num, &port_attr))
 		return PR_NOT_SUPPORTED;
 
-	if (ib_sa_opa_pathrecord_support(client, device, port_num))
+	if (ib_sa_opa_pathrecord_support(client, sa_dev, port_num))
 		return PR_OPA_SUPPORTED;
 
 	if (port_attr.lid >= be16_to_cpu(IB_MULTICAST_LID_BASE))
@@ -1574,7 +1570,8 @@ int ib_sa_path_rec_get(struct ib_sa_client *client,
 
 	query->sa_query.port     = port;
 	if (rec->rec_type == SA_PATH_REC_TYPE_OPA) {
-		status = opa_pr_query_possible(client, device, port_num, rec);
+		status = opa_pr_query_possible(client, sa_dev, device, port_num,
+					       rec);
 		if (status == PR_NOT_SUPPORTED) {
 			ret = -EINVAL;
 			goto err1;
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 2d4083bf4a04..2100568f84b1 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -296,6 +296,8 @@ static __poll_t ib_uverbs_event_poll(struct ib_uverbs_event_queue *ev_queue,
 	spin_lock_irq(&ev_queue->lock);
 	if (!list_empty(&ev_queue->event_list))
 		pollflags = EPOLLIN | EPOLLRDNORM;
+	else if (ev_queue->is_closed)
+		pollflags = EPOLLERR;
 	spin_unlock_irq(&ev_queue->lock);
 
 	return pollflags;
@@ -820,6 +822,10 @@ void uverbs_user_mmap_disassociate(struct ib_uverbs_file *ufile)
 			ret = mmget_not_zero(mm);
 			if (!ret) {
 				list_del_init(&priv->list);
+				if (priv->entry) {
+					rdma_user_mmap_entry_put(priv->entry);
+					priv->entry = NULL;
+				}
 				mm = NULL;
 				continue;
 			}
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 56a71337112c..3bfadd8effcc 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -2574,6 +2574,7 @@ EXPORT_SYMBOL(ib_map_mr_sg_pi);
  * @page_size:     page vector desired page size
  *
  * Constraints:
+ *
  * - The first sg element is allowed to have an offset.
  * - Each sg element must either be aligned to page_size or virtually
  *   contiguous to the previous element. In case an sg element has a
@@ -2607,10 +2608,12 @@ EXPORT_SYMBOL(ib_map_mr_sg);
  * @mr:            memory region
  * @sgl:           dma mapped scatterlist
  * @sg_nents:      number of entries in sg
- * @sg_offset_p:   IN:  start offset in bytes into sg
- *                 OUT: offset in bytes for element n of the sg of the first
+ * @sg_offset_p:   ==== =======================================================
+ *                 IN   start offset in bytes into sg
+ *                 OUT  offset in bytes for element n of the sg of the first
  *                      byte that has not been processed where n is the return
  *                      value of this function.
+ *                 ==== =======================================================
  * @set_page:      driver page assignment function pointer
  *
  * Core service helper for drivers to convert the largest
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index 95f6d493d1b9..d98348e82422 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -856,7 +856,7 @@ static int bnxt_re_init_user_qp(struct bnxt_re_dev *rdev, struct bnxt_re_pd *pd,
 	if (ib_copy_from_udata(&ureq, udata, sizeof(ureq)))
 		return -EFAULT;
 
-	bytes = (qplib_qp->sq.max_wqe * BNXT_QPLIB_MAX_SQE_ENTRY_SIZE);
+	bytes = (qplib_qp->sq.max_wqe * qplib_qp->sq.wqe_size);
 	/* Consider mapping PSN search memory only for RC QPs. */
 	if (qplib_qp->type == CMDQ_CREATE_QP_TYPE_RC) {
 		psn_sz = bnxt_qplib_is_chip_gen_p5(rdev->chip_ctx) ?
@@ -879,7 +879,7 @@ static int bnxt_re_init_user_qp(struct bnxt_re_dev *rdev, struct bnxt_re_pd *pd,
 	qplib_qp->qp_handle = ureq.qp_handle;
 
 	if (!qp->qplib_qp.srq) {
-		bytes = (qplib_qp->rq.max_wqe * BNXT_QPLIB_MAX_RQE_ENTRY_SIZE);
+		bytes = (qplib_qp->rq.max_wqe * qplib_qp->rq.wqe_size);
 		bytes = PAGE_ALIGN(bytes);
 		umem = ib_umem_get(&rdev->ibdev, ureq.qprva, bytes,
 				   IB_ACCESS_LOCAL_WRITE);
@@ -976,6 +976,7 @@ static struct bnxt_re_qp *bnxt_re_create_shadow_qp
 	qp->qplib_qp.sig_type = true;
 
 	/* Shadow QP SQ depth should be same as QP1 RQ depth */
+	qp->qplib_qp.sq.wqe_size = bnxt_re_get_swqe_size();
 	qp->qplib_qp.sq.max_wqe = qp1_qp->rq.max_wqe;
 	qp->qplib_qp.sq.max_sge = 2;
 	/* Q full delta can be 1 since it is internal QP */
@@ -986,6 +987,7 @@ static struct bnxt_re_qp *bnxt_re_create_shadow_qp
 	qp->qplib_qp.scq = qp1_qp->scq;
 	qp->qplib_qp.rcq = qp1_qp->rcq;
 
+	qp->qplib_qp.rq.wqe_size = bnxt_re_get_rwqe_size();
 	qp->qplib_qp.rq.max_wqe = qp1_qp->rq.max_wqe;
 	qp->qplib_qp.rq.max_sge = qp1_qp->rq.max_sge;
 	/* Q full delta can be 1 since it is internal QP */
@@ -1021,10 +1023,12 @@ static int bnxt_re_init_rq_attr(struct bnxt_re_qp *qp,
 	struct bnxt_qplib_dev_attr *dev_attr;
 	struct bnxt_qplib_qp *qplqp;
 	struct bnxt_re_dev *rdev;
+	struct bnxt_qplib_q *rq;
 	int entries;
 
 	rdev = qp->rdev;
 	qplqp = &qp->qplib_qp;
+	rq = &qplqp->rq;
 	dev_attr = &rdev->dev_attr;
 
 	if (init_attr->srq) {
@@ -1036,23 +1040,21 @@ static int bnxt_re_init_rq_attr(struct bnxt_re_qp *qp,
 			return -EINVAL;
 		}
 		qplqp->srq = &srq->qplib_srq;
-		qplqp->rq.max_wqe = 0;
+		rq->max_wqe = 0;
 	} else {
+		rq->wqe_size = bnxt_re_get_rwqe_size();
 		/* Allocate 1 more than what's provided so posting max doesn't
 		 * mean empty.
 		 */
 		entries = roundup_pow_of_two(init_attr->cap.max_recv_wr + 1);
-		qplqp->rq.max_wqe = min_t(u32, entries,
-					  dev_attr->max_qp_wqes + 1);
-
-		qplqp->rq.q_full_delta = qplqp->rq.max_wqe -
-					 init_attr->cap.max_recv_wr;
-		qplqp->rq.max_sge = init_attr->cap.max_recv_sge;
-		if (qplqp->rq.max_sge > dev_attr->max_qp_sges)
-			qplqp->rq.max_sge = dev_attr->max_qp_sges;
+		rq->max_wqe = min_t(u32, entries, dev_attr->max_qp_wqes + 1);
+		rq->q_full_delta = rq->max_wqe - init_attr->cap.max_recv_wr;
+		rq->max_sge = init_attr->cap.max_recv_sge;
+		if (rq->max_sge > dev_attr->max_qp_sges)
+			rq->max_sge = dev_attr->max_qp_sges;
 	}
-	qplqp->rq.sg_info.pgsize = PAGE_SIZE;
-	qplqp->rq.sg_info.pgshft = PAGE_SHIFT;
+	rq->sg_info.pgsize = PAGE_SIZE;
+	rq->sg_info.pgshft = PAGE_SHIFT;
 
 	return 0;
 }
@@ -1080,15 +1082,18 @@ static void bnxt_re_init_sq_attr(struct bnxt_re_qp *qp,
 	struct bnxt_qplib_dev_attr *dev_attr;
 	struct bnxt_qplib_qp *qplqp;
 	struct bnxt_re_dev *rdev;
+	struct bnxt_qplib_q *sq;
 	int entries;
 
 	rdev = qp->rdev;
 	qplqp = &qp->qplib_qp;
+	sq = &qplqp->sq;
 	dev_attr = &rdev->dev_attr;
 
-	qplqp->sq.max_sge = init_attr->cap.max_send_sge;
-	if (qplqp->sq.max_sge > dev_attr->max_qp_sges)
-		qplqp->sq.max_sge = dev_attr->max_qp_sges;
+	sq->wqe_size = bnxt_re_get_swqe_size();
+	sq->max_sge = init_attr->cap.max_send_sge;
+	if (sq->max_sge > dev_attr->max_qp_sges)
+		sq->max_sge = dev_attr->max_qp_sges;
 	/*
 	 * Change the SQ depth if user has requested minimum using
 	 * configfs. Only supported for kernel consumers
@@ -1096,9 +1101,9 @@ static void bnxt_re_init_sq_attr(struct bnxt_re_qp *qp,
 	entries = init_attr->cap.max_send_wr;
 	/* Allocate 128 + 1 more than what's provided */
 	entries = roundup_pow_of_two(entries + BNXT_QPLIB_RESERVED_QP_WRS + 1);
-	qplqp->sq.max_wqe = min_t(u32, entries, dev_attr->max_qp_wqes +
-			BNXT_QPLIB_RESERVED_QP_WRS + 1);
-	qplqp->sq.q_full_delta = BNXT_QPLIB_RESERVED_QP_WRS + 1;
+	sq->max_wqe = min_t(u32, entries, dev_attr->max_qp_wqes +
+			    BNXT_QPLIB_RESERVED_QP_WRS + 1);
+	sq->q_full_delta = BNXT_QPLIB_RESERVED_QP_WRS + 1;
 	/*
 	 * Reserving one slot for Phantom WQE. Application can
 	 * post one extra entry in this case. But allowing this to avoid
@@ -1511,7 +1516,7 @@ static int bnxt_re_init_user_srq(struct bnxt_re_dev *rdev,
 	if (ib_copy_from_udata(&ureq, udata, sizeof(ureq)))
 		return -EFAULT;
 
-	bytes = (qplib_srq->max_wqe * BNXT_QPLIB_MAX_RQE_ENTRY_SIZE);
+	bytes = (qplib_srq->max_wqe * qplib_srq->wqe_size);
 	bytes = PAGE_ALIGN(bytes);
 	umem = ib_umem_get(&rdev->ibdev, ureq.srqva, bytes,
 			   IB_ACCESS_LOCAL_WRITE);
@@ -1534,15 +1539,20 @@ int bnxt_re_create_srq(struct ib_srq *ib_srq,
 		       struct ib_srq_init_attr *srq_init_attr,
 		       struct ib_udata *udata)
 {
-	struct ib_pd *ib_pd = ib_srq->pd;
-	struct bnxt_re_pd *pd = container_of(ib_pd, struct bnxt_re_pd, ib_pd);
-	struct bnxt_re_dev *rdev = pd->rdev;
-	struct bnxt_qplib_dev_attr *dev_attr = &rdev->dev_attr;
-	struct bnxt_re_srq *srq =
-		container_of(ib_srq, struct bnxt_re_srq, ib_srq);
+	struct bnxt_qplib_dev_attr *dev_attr;
 	struct bnxt_qplib_nq *nq = NULL;
+	struct bnxt_re_dev *rdev;
+	struct bnxt_re_srq *srq;
+	struct bnxt_re_pd *pd;
+	struct ib_pd *ib_pd;
 	int rc, entries;
 
+	ib_pd = ib_srq->pd;
+	pd = container_of(ib_pd, struct bnxt_re_pd, ib_pd);
+	rdev = pd->rdev;
+	dev_attr = &rdev->dev_attr;
+	srq = container_of(ib_srq, struct bnxt_re_srq, ib_srq);
+
 	if (srq_init_attr->attr.max_wr >= dev_attr->max_srq_wqes) {
 		ibdev_err(&rdev->ibdev, "Create CQ failed - max exceeded");
 		rc = -EINVAL;
@@ -1563,8 +1573,9 @@ int bnxt_re_create_srq(struct ib_srq *ib_srq,
 	entries = roundup_pow_of_two(srq_init_attr->attr.max_wr + 1);
 	if (entries > dev_attr->max_srq_wqes + 1)
 		entries = dev_attr->max_srq_wqes + 1;
-
 	srq->qplib_srq.max_wqe = entries;
+
+	srq->qplib_srq.wqe_size = bnxt_re_get_rwqe_size();
 	srq->qplib_srq.max_sge = srq_init_attr->attr.max_sge;
 	srq->qplib_srq.threshold = srq_init_attr->attr.srq_limit;
 	srq->srq_limit = srq_init_attr->attr.srq_limit;
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.h b/drivers/infiniband/hw/bnxt_re/ib_verbs.h
index 23d972da5652..18dd46f46cf4 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.h
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.h
@@ -142,6 +142,16 @@ struct bnxt_re_ucontext {
 	spinlock_t		sh_lock;	/* protect shpg */
 };
 
+static inline u16 bnxt_re_get_swqe_size(void)
+{
+	return sizeof(struct sq_send);
+}
+
+static inline u16 bnxt_re_get_rwqe_size(void)
+{
+	return sizeof(struct rq_wqe);
+}
+
 int bnxt_re_query_device(struct ib_device *ibdev,
 			 struct ib_device_attr *ib_attr,
 			 struct ib_udata *udata);
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
index 899a5d2c100e..c5e29577cd43 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
@@ -300,12 +300,12 @@ static void bnxt_qplib_service_nq(unsigned long data)
 {
 	struct bnxt_qplib_nq *nq = (struct bnxt_qplib_nq *)data;
 	struct bnxt_qplib_hwq *hwq = &nq->hwq;
-	struct nq_base *nqe, **nq_ptr;
-	struct bnxt_qplib_cq *cq;
-	int num_cqne_processed = 0;
 	int num_srqne_processed = 0;
+	int num_cqne_processed = 0;
+	struct bnxt_qplib_cq *cq;
 	int budget = nq->budget;
 	u32 sw_cons, raw_cons;
+	struct nq_base *nqe;
 	uintptr_t q_handle;
 	u16 type;
 
@@ -314,8 +314,7 @@ static void bnxt_qplib_service_nq(unsigned long data)
 	raw_cons = hwq->cons;
 	while (budget--) {
 		sw_cons = HWQ_CMP(raw_cons, hwq);
-		nq_ptr = (struct nq_base **)hwq->pbl_ptr;
-		nqe = &nq_ptr[NQE_PG(sw_cons)][NQE_IDX(sw_cons)];
+		nqe = bnxt_qplib_get_qe(hwq, sw_cons, NULL);
 		if (!NQE_CMP_VALID(nqe, raw_cons, hwq->max_elements))
 			break;
 
@@ -392,13 +391,11 @@ static irqreturn_t bnxt_qplib_nq_irq(int irq, void *dev_instance)
 {
 	struct bnxt_qplib_nq *nq = dev_instance;
 	struct bnxt_qplib_hwq *hwq = &nq->hwq;
-	struct nq_base **nq_ptr;
 	u32 sw_cons;
 
 	/* Prefetch the NQ element */
 	sw_cons = HWQ_CMP(hwq->cons, hwq);
-	nq_ptr = (struct nq_base **)nq->hwq.pbl_ptr;
-	prefetch(&nq_ptr[NQE_PG(sw_cons)][NQE_IDX(sw_cons)]);
+	prefetch(bnxt_qplib_get_qe(hwq, sw_cons, NULL));
 
 	/* Fan out to CPU affinitized kthreads? */
 	tasklet_schedule(&nq->nq_tasklet);
@@ -612,12 +609,13 @@ int bnxt_qplib_create_srq(struct bnxt_qplib_res *res,
 	struct cmdq_create_srq req;
 	struct bnxt_qplib_pbl *pbl;
 	u16 cmd_flags = 0;
+	u16 pg_sz_lvl;
 	int rc, idx;
 
 	hwq_attr.res = res;
 	hwq_attr.sginfo = &srq->sg_info;
 	hwq_attr.depth = srq->max_wqe;
-	hwq_attr.stride = BNXT_QPLIB_MAX_RQE_ENTRY_SIZE;
+	hwq_attr.stride = srq->wqe_size;
 	hwq_attr.type = HWQ_TYPE_QUEUE;
 	rc = bnxt_qplib_alloc_init_hwq(&srq->hwq, &hwq_attr);
 	if (rc)
@@ -638,22 +636,11 @@ int bnxt_qplib_create_srq(struct bnxt_qplib_res *res,
 
 	req.srq_size = cpu_to_le16((u16)srq->hwq.max_elements);
 	pbl = &srq->hwq.pbl[PBL_LVL_0];
-	req.pg_size_lvl = cpu_to_le16((((u16)srq->hwq.level &
-				      CMDQ_CREATE_SRQ_LVL_MASK) <<
-				      CMDQ_CREATE_SRQ_LVL_SFT) |
-				      (pbl->pg_size == ROCE_PG_SIZE_4K ?
-				       CMDQ_CREATE_SRQ_PG_SIZE_PG_4K :
-				       pbl->pg_size == ROCE_PG_SIZE_8K ?
-				       CMDQ_CREATE_SRQ_PG_SIZE_PG_8K :
-				       pbl->pg_size == ROCE_PG_SIZE_64K ?
-				       CMDQ_CREATE_SRQ_PG_SIZE_PG_64K :
-				       pbl->pg_size == ROCE_PG_SIZE_2M ?
-				       CMDQ_CREATE_SRQ_PG_SIZE_PG_2M :
-				       pbl->pg_size == ROCE_PG_SIZE_8M ?
-				       CMDQ_CREATE_SRQ_PG_SIZE_PG_8M :
-				       pbl->pg_size == ROCE_PG_SIZE_1G ?
-				       CMDQ_CREATE_SRQ_PG_SIZE_PG_1G :
-				       CMDQ_CREATE_SRQ_PG_SIZE_PG_4K));
+	pg_sz_lvl = ((u16)bnxt_qplib_base_pg_size(&srq->hwq) <<
+		     CMDQ_CREATE_SRQ_PG_SIZE_SFT);
+	pg_sz_lvl |= (srq->hwq.level & CMDQ_CREATE_SRQ_LVL_MASK) <<
+		      CMDQ_CREATE_SRQ_LVL_SFT;
+	req.pg_size_lvl = cpu_to_le16(pg_sz_lvl);
 	req.pbl = cpu_to_le64(pbl->pg_map_arr[0]);
 	req.pd_id = cpu_to_le32(srq->pd->id);
 	req.eventq_id = cpu_to_le16(srq->eventq_hw_ring_id);
@@ -740,7 +727,7 @@ int bnxt_qplib_post_srq_recv(struct bnxt_qplib_srq *srq,
 			     struct bnxt_qplib_swqe *wqe)
 {
 	struct bnxt_qplib_hwq *srq_hwq = &srq->hwq;
-	struct rq_wqe *srqe, **srqe_ptr;
+	struct rq_wqe *srqe;
 	struct sq_sge *hw_sge;
 	u32 sw_prod, sw_cons, count = 0;
 	int i, rc = 0, next;
@@ -758,9 +745,8 @@ int bnxt_qplib_post_srq_recv(struct bnxt_qplib_srq *srq,
 	spin_unlock(&srq_hwq->lock);
 
 	sw_prod = HWQ_CMP(srq_hwq->prod, srq_hwq);
-	srqe_ptr = (struct rq_wqe **)srq_hwq->pbl_ptr;
-	srqe = &srqe_ptr[RQE_PG(sw_prod)][RQE_IDX(sw_prod)];
-	memset(srqe, 0, BNXT_QPLIB_MAX_RQE_ENTRY_SIZE);
+	srqe = bnxt_qplib_get_qe(srq_hwq, sw_prod, NULL);
+	memset(srqe, 0, srq->wqe_size);
 	/* Calculate wqe_size16 and data_len */
 	for (i = 0, hw_sge = (struct sq_sge *)srqe->data;
 	     i < wqe->num_sge; i++, hw_sge++) {
@@ -809,6 +795,7 @@ int bnxt_qplib_create_qp1(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 	struct bnxt_qplib_pbl *pbl;
 	u16 cmd_flags = 0;
 	u32 qp_flags = 0;
+	u8 pg_sz_lvl;
 	int rc;
 
 	RCFW_CMD_PREP(req, CREATE_QP1, cmd_flags);
@@ -822,7 +809,7 @@ int bnxt_qplib_create_qp1(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 	hwq_attr.res = res;
 	hwq_attr.sginfo = &sq->sg_info;
 	hwq_attr.depth = sq->max_wqe;
-	hwq_attr.stride = BNXT_QPLIB_MAX_SQE_ENTRY_SIZE;
+	hwq_attr.stride = sq->wqe_size;
 	hwq_attr.type = HWQ_TYPE_QUEUE;
 	rc = bnxt_qplib_alloc_init_hwq(&sq->hwq, &hwq_attr);
 	if (rc)
@@ -835,33 +822,18 @@ int bnxt_qplib_create_qp1(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 	}
 	pbl = &sq->hwq.pbl[PBL_LVL_0];
 	req.sq_pbl = cpu_to_le64(pbl->pg_map_arr[0]);
-	req.sq_pg_size_sq_lvl =
-		((sq->hwq.level & CMDQ_CREATE_QP1_SQ_LVL_MASK)
-				<<  CMDQ_CREATE_QP1_SQ_LVL_SFT) |
-		(pbl->pg_size == ROCE_PG_SIZE_4K ?
-				CMDQ_CREATE_QP1_SQ_PG_SIZE_PG_4K :
-		 pbl->pg_size == ROCE_PG_SIZE_8K ?
-				CMDQ_CREATE_QP1_SQ_PG_SIZE_PG_8K :
-		 pbl->pg_size == ROCE_PG_SIZE_64K ?
-				CMDQ_CREATE_QP1_SQ_PG_SIZE_PG_64K :
-		 pbl->pg_size == ROCE_PG_SIZE_2M ?
-				CMDQ_CREATE_QP1_SQ_PG_SIZE_PG_2M :
-		 pbl->pg_size == ROCE_PG_SIZE_8M ?
-				CMDQ_CREATE_QP1_SQ_PG_SIZE_PG_8M :
-		 pbl->pg_size == ROCE_PG_SIZE_1G ?
-				CMDQ_CREATE_QP1_SQ_PG_SIZE_PG_1G :
-		 CMDQ_CREATE_QP1_SQ_PG_SIZE_PG_4K);
+	pg_sz_lvl = (bnxt_qplib_base_pg_size(&sq->hwq) <<
+		     CMDQ_CREATE_QP1_SQ_PG_SIZE_SFT);
+	pg_sz_lvl |= (sq->hwq.level & CMDQ_CREATE_QP1_SQ_LVL_MASK);
+	req.sq_pg_size_sq_lvl = pg_sz_lvl;
 
 	if (qp->scq)
 		req.scq_cid = cpu_to_le32(qp->scq->id);
-
-	qp_flags |= CMDQ_CREATE_QP1_QP_FLAGS_RESERVED_LKEY_ENABLE;
-
 	/* RQ */
 	if (rq->max_wqe) {
 		hwq_attr.res = res;
 		hwq_attr.sginfo = &rq->sg_info;
-		hwq_attr.stride = BNXT_QPLIB_MAX_RQE_ENTRY_SIZE;
+		hwq_attr.stride = rq->wqe_size;
 		hwq_attr.depth = qp->rq.max_wqe;
 		hwq_attr.type = HWQ_TYPE_QUEUE;
 		rc = bnxt_qplib_alloc_init_hwq(&rq->hwq, &hwq_attr);
@@ -876,32 +848,20 @@ int bnxt_qplib_create_qp1(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 		}
 		pbl = &rq->hwq.pbl[PBL_LVL_0];
 		req.rq_pbl = cpu_to_le64(pbl->pg_map_arr[0]);
-		req.rq_pg_size_rq_lvl =
-			((rq->hwq.level & CMDQ_CREATE_QP1_RQ_LVL_MASK) <<
-			 CMDQ_CREATE_QP1_RQ_LVL_SFT) |
-				(pbl->pg_size == ROCE_PG_SIZE_4K ?
-					CMDQ_CREATE_QP1_RQ_PG_SIZE_PG_4K :
-				 pbl->pg_size == ROCE_PG_SIZE_8K ?
-					CMDQ_CREATE_QP1_RQ_PG_SIZE_PG_8K :
-				 pbl->pg_size == ROCE_PG_SIZE_64K ?
-					CMDQ_CREATE_QP1_RQ_PG_SIZE_PG_64K :
-				 pbl->pg_size == ROCE_PG_SIZE_2M ?
-					CMDQ_CREATE_QP1_RQ_PG_SIZE_PG_2M :
-				 pbl->pg_size == ROCE_PG_SIZE_8M ?
-					CMDQ_CREATE_QP1_RQ_PG_SIZE_PG_8M :
-				 pbl->pg_size == ROCE_PG_SIZE_1G ?
-					CMDQ_CREATE_QP1_RQ_PG_SIZE_PG_1G :
-				 CMDQ_CREATE_QP1_RQ_PG_SIZE_PG_4K);
+		pg_sz_lvl = (bnxt_qplib_base_pg_size(&rq->hwq) <<
+			     CMDQ_CREATE_QP1_RQ_PG_SIZE_SFT);
+		pg_sz_lvl |= (rq->hwq.level & CMDQ_CREATE_QP1_RQ_LVL_MASK);
+		req.rq_pg_size_rq_lvl = pg_sz_lvl;
 		if (qp->rcq)
 			req.rcq_cid = cpu_to_le32(qp->rcq->id);
 	}
-
 	/* Header buffer - allow hdr_buf pass in */
 	rc = bnxt_qplib_alloc_qp_hdr_buf(res, qp);
 	if (rc) {
 		rc = -ENOMEM;
 		goto fail;
 	}
+	qp_flags |= CMDQ_CREATE_QP1_QP_FLAGS_RESERVED_LKEY_ENABLE;
 	req.qp_flags = cpu_to_le32(qp_flags);
 	req.sq_size = cpu_to_le32(sq->hwq.max_elements);
 	req.rq_size = cpu_to_le32(rq->hwq.max_elements);
@@ -948,23 +908,47 @@ int bnxt_qplib_create_qp1(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 	return rc;
 }
 
+static void bnxt_qplib_init_psn_ptr(struct bnxt_qplib_qp *qp, int size)
+{
+	struct bnxt_qplib_hwq *hwq;
+	struct bnxt_qplib_q *sq;
+	u64 fpsne, psne, psn_pg;
+	u16 indx_pad = 0, indx;
+	u16 pg_num, pg_indx;
+	u64 *page;
+
+	sq = &qp->sq;
+	hwq = &sq->hwq;
+
+	fpsne = (u64)bnxt_qplib_get_qe(hwq, hwq->max_elements, &psn_pg);
+	if (!IS_ALIGNED(fpsne, PAGE_SIZE))
+		indx_pad = ALIGN(fpsne, PAGE_SIZE) / size;
+
+	page = (u64 *)psn_pg;
+	for (indx = 0; indx < hwq->max_elements; indx++) {
+		pg_num = (indx + indx_pad) / (PAGE_SIZE / size);
+		pg_indx = (indx + indx_pad) % (PAGE_SIZE / size);
+		psne = page[pg_num] + pg_indx * size;
+		sq->swq[indx].psn_ext = (struct sq_psn_search_ext *)psne;
+		sq->swq[indx].psn_search = (struct sq_psn_search *)psne;
+	}
+}
+
 int bnxt_qplib_create_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 {
 	struct bnxt_qplib_rcfw *rcfw = res->rcfw;
 	struct bnxt_qplib_hwq_attr hwq_attr = {};
-	unsigned long int psn_search, poff = 0;
 	struct bnxt_qplib_sg_info sginfo = {};
-	struct sq_psn_search **psn_search_ptr;
 	struct bnxt_qplib_q *sq = &qp->sq;
 	struct bnxt_qplib_q *rq = &qp->rq;
-	int i, rc, req_size, psn_sz = 0;
-	struct sq_send **hw_sq_send_ptr;
 	struct creq_create_qp_resp resp;
+	int rc, req_size, psn_sz = 0;
 	struct bnxt_qplib_hwq *xrrq;
 	u16 cmd_flags = 0, max_ssge;
-	struct cmdq_create_qp req;
 	struct bnxt_qplib_pbl *pbl;
+	struct cmdq_create_qp req;
 	u32 qp_flags = 0;
+	u8 pg_sz_lvl;
 	u16 max_rsge;
 
 	RCFW_CMD_PREP(req, CREATE_QP, cmd_flags);
@@ -983,7 +967,7 @@ int bnxt_qplib_create_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 
 	hwq_attr.res = res;
 	hwq_attr.sginfo = &sq->sg_info;
-	hwq_attr.stride = BNXT_QPLIB_MAX_SQE_ENTRY_SIZE;
+	hwq_attr.stride = sq->wqe_size;
 	hwq_attr.depth = sq->max_wqe;
 	hwq_attr.aux_stride = psn_sz;
 	hwq_attr.aux_depth = hwq_attr.depth;
@@ -997,64 +981,25 @@ int bnxt_qplib_create_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 		rc = -ENOMEM;
 		goto fail_sq;
 	}
-	hw_sq_send_ptr = (struct sq_send **)sq->hwq.pbl_ptr;
-	if (psn_sz) {
-		psn_search_ptr = (struct sq_psn_search **)
-				  &hw_sq_send_ptr[get_sqe_pg
-					(sq->hwq.max_elements)];
-		psn_search = (unsigned long int)
-			      &hw_sq_send_ptr[get_sqe_pg(sq->hwq.max_elements)]
-			      [get_sqe_idx(sq->hwq.max_elements)];
-		if (psn_search & ~PAGE_MASK) {
-			/* If the psn_search does not start on a page boundary,
-			 * then calculate the offset
-			 */
-			poff = (psn_search & ~PAGE_MASK) /
-				BNXT_QPLIB_MAX_PSNE_ENTRY_SIZE;
-		}
-		for (i = 0; i < sq->hwq.max_elements; i++) {
-			sq->swq[i].psn_search =
-				&psn_search_ptr[get_psne_pg(i + poff)]
-					       [get_psne_idx(i + poff)];
-			/*psns_ext will be used only for P5 chips. */
-			sq->swq[i].psn_ext =
-				(struct sq_psn_search_ext *)
-				&psn_search_ptr[get_psne_pg(i + poff)]
-					       [get_psne_idx(i + poff)];
-		}
-	}
+
+	if (psn_sz)
+		bnxt_qplib_init_psn_ptr(qp, psn_sz);
+
 	pbl = &sq->hwq.pbl[PBL_LVL_0];
 	req.sq_pbl = cpu_to_le64(pbl->pg_map_arr[0]);
-	req.sq_pg_size_sq_lvl =
-		((sq->hwq.level & CMDQ_CREATE_QP_SQ_LVL_MASK)
-				 <<  CMDQ_CREATE_QP_SQ_LVL_SFT) |
-		(pbl->pg_size == ROCE_PG_SIZE_4K ?
-				CMDQ_CREATE_QP_SQ_PG_SIZE_PG_4K :
-		 pbl->pg_size == ROCE_PG_SIZE_8K ?
-				CMDQ_CREATE_QP_SQ_PG_SIZE_PG_8K :
-		 pbl->pg_size == ROCE_PG_SIZE_64K ?
-				CMDQ_CREATE_QP_SQ_PG_SIZE_PG_64K :
-		 pbl->pg_size == ROCE_PG_SIZE_2M ?
-				CMDQ_CREATE_QP_SQ_PG_SIZE_PG_2M :
-		 pbl->pg_size == ROCE_PG_SIZE_8M ?
-				CMDQ_CREATE_QP_SQ_PG_SIZE_PG_8M :
-		 pbl->pg_size == ROCE_PG_SIZE_1G ?
-				CMDQ_CREATE_QP_SQ_PG_SIZE_PG_1G :
-		 CMDQ_CREATE_QP_SQ_PG_SIZE_PG_4K);
+	pg_sz_lvl = (bnxt_qplib_base_pg_size(&sq->hwq) <<
+		     CMDQ_CREATE_QP_SQ_PG_SIZE_SFT);
+	pg_sz_lvl |= (sq->hwq.level & CMDQ_CREATE_QP_SQ_LVL_MASK);
+	req.sq_pg_size_sq_lvl = pg_sz_lvl;
 
 	if (qp->scq)
 		req.scq_cid = cpu_to_le32(qp->scq->id);
 
-	qp_flags |= CMDQ_CREATE_QP_QP_FLAGS_RESERVED_LKEY_ENABLE;
-	qp_flags |= CMDQ_CREATE_QP_QP_FLAGS_FR_PMR_ENABLED;
-	if (qp->sig_type)
-		qp_flags |= CMDQ_CREATE_QP_QP_FLAGS_FORCE_COMPLETION;
-
 	/* RQ */
 	if (rq->max_wqe) {
 		hwq_attr.res = res;
 		hwq_attr.sginfo = &rq->sg_info;
-		hwq_attr.stride = BNXT_QPLIB_MAX_RQE_ENTRY_SIZE;
+		hwq_attr.stride = rq->wqe_size;
 		hwq_attr.depth = rq->max_wqe;
 		hwq_attr.aux_stride = 0;
 		hwq_attr.aux_depth = 0;
@@ -1071,22 +1016,10 @@ int bnxt_qplib_create_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 		}
 		pbl = &rq->hwq.pbl[PBL_LVL_0];
 		req.rq_pbl = cpu_to_le64(pbl->pg_map_arr[0]);
-		req.rq_pg_size_rq_lvl =
-			((rq->hwq.level & CMDQ_CREATE_QP_RQ_LVL_MASK) <<
-			 CMDQ_CREATE_QP_RQ_LVL_SFT) |
-				(pbl->pg_size == ROCE_PG_SIZE_4K ?
-					CMDQ_CREATE_QP_RQ_PG_SIZE_PG_4K :
-				 pbl->pg_size == ROCE_PG_SIZE_8K ?
-					CMDQ_CREATE_QP_RQ_PG_SIZE_PG_8K :
-				 pbl->pg_size == ROCE_PG_SIZE_64K ?
-					CMDQ_CREATE_QP_RQ_PG_SIZE_PG_64K :
-				 pbl->pg_size == ROCE_PG_SIZE_2M ?
-					CMDQ_CREATE_QP_RQ_PG_SIZE_PG_2M :
-				 pbl->pg_size == ROCE_PG_SIZE_8M ?
-					CMDQ_CREATE_QP_RQ_PG_SIZE_PG_8M :
-				 pbl->pg_size == ROCE_PG_SIZE_1G ?
-					CMDQ_CREATE_QP_RQ_PG_SIZE_PG_1G :
-				 CMDQ_CREATE_QP_RQ_PG_SIZE_PG_4K);
+		pg_sz_lvl = (bnxt_qplib_base_pg_size(&rq->hwq) <<
+			     CMDQ_CREATE_QP_RQ_PG_SIZE_SFT);
+		pg_sz_lvl |= (rq->hwq.level & CMDQ_CREATE_QP_RQ_LVL_MASK);
+		req.rq_pg_size_rq_lvl = pg_sz_lvl;
 	} else {
 		/* SRQ */
 		if (qp->srq) {
@@ -1097,7 +1030,13 @@ int bnxt_qplib_create_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 
 	if (qp->rcq)
 		req.rcq_cid = cpu_to_le32(qp->rcq->id);
+
+	qp_flags |= CMDQ_CREATE_QP_QP_FLAGS_RESERVED_LKEY_ENABLE;
+	qp_flags |= CMDQ_CREATE_QP_QP_FLAGS_FR_PMR_ENABLED;
+	if (qp->sig_type)
+		qp_flags |= CMDQ_CREATE_QP_QP_FLAGS_FORCE_COMPLETION;
 	req.qp_flags = cpu_to_le32(qp_flags);
+
 	req.sq_size = cpu_to_le32(sq->hwq.max_elements);
 	req.rq_size = cpu_to_le32(rq->hwq.max_elements);
 	qp->sq_hdr_buf = NULL;
@@ -1483,12 +1422,11 @@ int bnxt_qplib_query_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 static void __clean_cq(struct bnxt_qplib_cq *cq, u64 qp)
 {
 	struct bnxt_qplib_hwq *cq_hwq = &cq->hwq;
-	struct cq_base *hw_cqe, **hw_cqe_ptr;
+	struct cq_base *hw_cqe;
 	int i;
 
 	for (i = 0; i < cq_hwq->max_elements; i++) {
-		hw_cqe_ptr = (struct cq_base **)cq_hwq->pbl_ptr;
-		hw_cqe = &hw_cqe_ptr[CQE_PG(i)][CQE_IDX(i)];
+		hw_cqe = bnxt_qplib_get_qe(cq_hwq, i, NULL);
 		if (!CQE_CMP_VALID(hw_cqe, i, cq_hwq->max_elements))
 			continue;
 		/*
@@ -1615,6 +1553,34 @@ void *bnxt_qplib_get_qp1_rq_buf(struct bnxt_qplib_qp *qp,
 	return NULL;
 }
 
+static void bnxt_qplib_fill_psn_search(struct bnxt_qplib_qp *qp,
+				       struct bnxt_qplib_swqe *wqe,
+				       struct bnxt_qplib_swq *swq)
+{
+	struct sq_psn_search_ext *psns_ext;
+	struct sq_psn_search *psns;
+	u32 flg_npsn;
+	u32 op_spsn;
+
+	psns = swq->psn_search;
+	psns_ext = swq->psn_ext;
+
+	op_spsn = ((swq->start_psn << SQ_PSN_SEARCH_START_PSN_SFT) &
+		    SQ_PSN_SEARCH_START_PSN_MASK);
+	op_spsn |= ((wqe->type << SQ_PSN_SEARCH_OPCODE_SFT) &
+		     SQ_PSN_SEARCH_OPCODE_MASK);
+	flg_npsn = ((swq->next_psn << SQ_PSN_SEARCH_NEXT_PSN_SFT) &
+		     SQ_PSN_SEARCH_NEXT_PSN_MASK);
+
+	if (bnxt_qplib_is_chip_gen_p5(qp->cctx)) {
+		psns_ext->opcode_start_psn = cpu_to_le32(op_spsn);
+		psns_ext->flags_next_psn = cpu_to_le32(flg_npsn);
+	} else {
+		psns->opcode_start_psn = cpu_to_le32(op_spsn);
+		psns->flags_next_psn = cpu_to_le32(flg_npsn);
+	}
+}
+
 void bnxt_qplib_post_send_db(struct bnxt_qplib_qp *qp)
 {
 	struct bnxt_qplib_q *sq = &qp->sq;
@@ -1625,16 +1591,16 @@ void bnxt_qplib_post_send_db(struct bnxt_qplib_qp *qp)
 int bnxt_qplib_post_send(struct bnxt_qplib_qp *qp,
 			 struct bnxt_qplib_swqe *wqe)
 {
+	struct bnxt_qplib_nq_work *nq_work = NULL;
+	int i, rc = 0, data_len = 0, pkt_num = 0;
 	struct bnxt_qplib_q *sq = &qp->sq;
+	struct sq_send *hw_sq_send_hdr;
 	struct bnxt_qplib_swq *swq;
-	struct sq_send *hw_sq_send_hdr, **hw_sq_send_ptr;
-	struct sq_sge *hw_sge;
-	struct bnxt_qplib_nq_work *nq_work = NULL;
 	bool sch_handler = false;
-	u32 sw_prod;
+	struct sq_sge *hw_sge;
 	u8 wqe_size16;
-	int i, rc = 0, data_len = 0, pkt_num = 0;
 	__le32 temp32;
+	u32 sw_prod;
 
 	if (qp->state != CMDQ_MODIFY_QP_NEW_STATE_RTS) {
 		if (qp->state == CMDQ_MODIFY_QP_NEW_STATE_ERR) {
@@ -1663,11 +1629,8 @@ int bnxt_qplib_post_send(struct bnxt_qplib_qp *qp,
 		swq->flags |= SQ_SEND_FLAGS_SIGNAL_COMP;
 	swq->start_psn = sq->psn & BTH_PSN_MASK;
 
-	hw_sq_send_ptr = (struct sq_send **)sq->hwq.pbl_ptr;
-	hw_sq_send_hdr = &hw_sq_send_ptr[get_sqe_pg(sw_prod)]
-					[get_sqe_idx(sw_prod)];
-
-	memset(hw_sq_send_hdr, 0, BNXT_QPLIB_MAX_SQE_ENTRY_SIZE);
+	hw_sq_send_hdr = bnxt_qplib_get_qe(&sq->hwq, sw_prod, NULL);
+	memset(hw_sq_send_hdr, 0, sq->wqe_size);
 
 	if (wqe->flags & BNXT_QPLIB_SWQE_FLAGS_INLINE) {
 		/* Copy the inline data */
@@ -1854,28 +1817,8 @@ int bnxt_qplib_post_send(struct bnxt_qplib_qp *qp,
 		goto done;
 	}
 	swq->next_psn = sq->psn & BTH_PSN_MASK;
-	if (swq->psn_search) {
-		u32 opcd_spsn;
-		u32 flg_npsn;
-
-		opcd_spsn = ((swq->start_psn << SQ_PSN_SEARCH_START_PSN_SFT) &
-			      SQ_PSN_SEARCH_START_PSN_MASK);
-		opcd_spsn |= ((wqe->type << SQ_PSN_SEARCH_OPCODE_SFT) &
-			       SQ_PSN_SEARCH_OPCODE_MASK);
-		flg_npsn = ((swq->next_psn << SQ_PSN_SEARCH_NEXT_PSN_SFT) &
-			     SQ_PSN_SEARCH_NEXT_PSN_MASK);
-		if (bnxt_qplib_is_chip_gen_p5(qp->cctx)) {
-			swq->psn_ext->opcode_start_psn =
-						cpu_to_le32(opcd_spsn);
-			swq->psn_ext->flags_next_psn =
-						cpu_to_le32(flg_npsn);
-		} else {
-			swq->psn_search->opcode_start_psn =
-						cpu_to_le32(opcd_spsn);
-			swq->psn_search->flags_next_psn =
-						cpu_to_le32(flg_npsn);
-		}
-	}
+	if (qp->type == CMDQ_CREATE_QP_TYPE_RC)
+		bnxt_qplib_fill_psn_search(qp, wqe, swq);
 queue_err:
 	if (sch_handler) {
 		/* Store the ULP info in the software structures */
@@ -1918,13 +1861,13 @@ void bnxt_qplib_post_recv_db(struct bnxt_qplib_qp *qp)
 int bnxt_qplib_post_recv(struct bnxt_qplib_qp *qp,
 			 struct bnxt_qplib_swqe *wqe)
 {
-	struct bnxt_qplib_q *rq = &qp->rq;
-	struct rq_wqe *rqe, **rqe_ptr;
-	struct sq_sge *hw_sge;
 	struct bnxt_qplib_nq_work *nq_work = NULL;
+	struct bnxt_qplib_q *rq = &qp->rq;
 	bool sch_handler = false;
-	u32 sw_prod;
+	struct sq_sge *hw_sge;
+	struct rq_wqe *rqe;
 	int i, rc = 0;
+	u32 sw_prod;
 
 	if (qp->state == CMDQ_MODIFY_QP_NEW_STATE_ERR) {
 		sch_handler = true;
@@ -1941,10 +1884,8 @@ int bnxt_qplib_post_recv(struct bnxt_qplib_qp *qp,
 	sw_prod = HWQ_CMP(rq->hwq.prod, &rq->hwq);
 	rq->swq[sw_prod].wr_id = wqe->wr_id;
 
-	rqe_ptr = (struct rq_wqe **)rq->hwq.pbl_ptr;
-	rqe = &rqe_ptr[RQE_PG(sw_prod)][RQE_IDX(sw_prod)];
-
-	memset(rqe, 0, BNXT_QPLIB_MAX_RQE_ENTRY_SIZE);
+	rqe = bnxt_qplib_get_qe(&rq->hwq, sw_prod, NULL);
+	memset(rqe, 0, rq->wqe_size);
 
 	/* Calculate wqe_size16 and data_len */
 	for (i = 0, hw_sge = (struct sq_sge *)rqe->data;
@@ -1997,9 +1938,10 @@ int bnxt_qplib_create_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq)
 	struct bnxt_qplib_rcfw *rcfw = res->rcfw;
 	struct bnxt_qplib_hwq_attr hwq_attr = {};
 	struct creq_create_cq_resp resp;
-	struct cmdq_create_cq req;
 	struct bnxt_qplib_pbl *pbl;
+	struct cmdq_create_cq req;
 	u16 cmd_flags = 0;
+	u32 pg_sz_lvl;
 	int rc;
 
 	hwq_attr.res = res;
@@ -2020,22 +1962,13 @@ int bnxt_qplib_create_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq)
 	}
 	req.dpi = cpu_to_le32(cq->dpi->dpi);
 	req.cq_handle = cpu_to_le64(cq->cq_handle);
-
 	req.cq_size = cpu_to_le32(cq->hwq.max_elements);
 	pbl = &cq->hwq.pbl[PBL_LVL_0];
-	req.pg_size_lvl = cpu_to_le32(
-	    ((cq->hwq.level & CMDQ_CREATE_CQ_LVL_MASK) <<
-						CMDQ_CREATE_CQ_LVL_SFT) |
-	    (pbl->pg_size == ROCE_PG_SIZE_4K ? CMDQ_CREATE_CQ_PG_SIZE_PG_4K :
-	     pbl->pg_size == ROCE_PG_SIZE_8K ? CMDQ_CREATE_CQ_PG_SIZE_PG_8K :
-	     pbl->pg_size == ROCE_PG_SIZE_64K ? CMDQ_CREATE_CQ_PG_SIZE_PG_64K :
-	     pbl->pg_size == ROCE_PG_SIZE_2M ? CMDQ_CREATE_CQ_PG_SIZE_PG_2M :
-	     pbl->pg_size == ROCE_PG_SIZE_8M ? CMDQ_CREATE_CQ_PG_SIZE_PG_8M :
-	     pbl->pg_size == ROCE_PG_SIZE_1G ? CMDQ_CREATE_CQ_PG_SIZE_PG_1G :
-	     CMDQ_CREATE_CQ_PG_SIZE_PG_4K));
-
+	pg_sz_lvl = (bnxt_qplib_base_pg_size(&cq->hwq) <<
+		     CMDQ_CREATE_CQ_PG_SIZE_SFT);
+	pg_sz_lvl |= (cq->hwq.level & CMDQ_CREATE_CQ_LVL_MASK);
+	req.pg_size_lvl = cpu_to_le32(pg_sz_lvl);
 	req.pbl = cpu_to_le64(pbl->pg_map_arr[0]);
-
 	req.cq_fco_cnq_id = cpu_to_le32(
 			(cq->cnq_hw_ring_id & CMDQ_CREATE_CQ_CNQ_ID_MASK) <<
 			 CMDQ_CREATE_CQ_CNQ_ID_SFT);
@@ -2194,13 +2127,13 @@ void bnxt_qplib_mark_qp_error(void *qp_handle)
 static int do_wa9060(struct bnxt_qplib_qp *qp, struct bnxt_qplib_cq *cq,
 		     u32 cq_cons, u32 sw_sq_cons, u32 cqe_sq_cons)
 {
-	struct bnxt_qplib_q *sq = &qp->sq;
-	struct bnxt_qplib_swq *swq;
 	u32 peek_sw_cq_cons, peek_raw_cq_cons, peek_sq_cons_idx;
-	struct cq_base *peek_hwcqe, **peek_hw_cqe_ptr;
+	struct bnxt_qplib_q *sq = &qp->sq;
 	struct cq_req *peek_req_hwcqe;
 	struct bnxt_qplib_qp *peek_qp;
 	struct bnxt_qplib_q *peek_sq;
+	struct bnxt_qplib_swq *swq;
+	struct cq_base *peek_hwcqe;
 	int i, rc = 0;
 
 	/* Normal mode */
@@ -2230,9 +2163,8 @@ static int do_wa9060(struct bnxt_qplib_qp *qp, struct bnxt_qplib_cq *cq,
 		i = cq->hwq.max_elements;
 		while (i--) {
 			peek_sw_cq_cons = HWQ_CMP((peek_sw_cq_cons), &cq->hwq);
-			peek_hw_cqe_ptr = (struct cq_base **)cq->hwq.pbl_ptr;
-			peek_hwcqe = &peek_hw_cqe_ptr[CQE_PG(peek_sw_cq_cons)]
-						     [CQE_IDX(peek_sw_cq_cons)];
+			peek_hwcqe = bnxt_qplib_get_qe(&cq->hwq,
+						       peek_sw_cq_cons, NULL);
 			/* If the next hwcqe is VALID */
 			if (CQE_CMP_VALID(peek_hwcqe, peek_raw_cq_cons,
 					  cq->hwq.max_elements)) {
@@ -2294,11 +2226,11 @@ static int bnxt_qplib_cq_process_req(struct bnxt_qplib_cq *cq,
 				     struct bnxt_qplib_cqe **pcqe, int *budget,
 				     u32 cq_cons, struct bnxt_qplib_qp **lib_qp)
 {
-	struct bnxt_qplib_qp *qp;
-	struct bnxt_qplib_q *sq;
-	struct bnxt_qplib_cqe *cqe;
 	u32 sw_sq_cons, cqe_sq_cons;
 	struct bnxt_qplib_swq *swq;
+	struct bnxt_qplib_cqe *cqe;
+	struct bnxt_qplib_qp *qp;
+	struct bnxt_qplib_q *sq;
 	int rc = 0;
 
 	qp = (struct bnxt_qplib_qp *)((unsigned long)
@@ -2408,10 +2340,10 @@ static int bnxt_qplib_cq_process_res_rc(struct bnxt_qplib_cq *cq,
 					struct bnxt_qplib_cqe **pcqe,
 					int *budget)
 {
-	struct bnxt_qplib_qp *qp;
-	struct bnxt_qplib_q *rq;
 	struct bnxt_qplib_srq *srq;
 	struct bnxt_qplib_cqe *cqe;
+	struct bnxt_qplib_qp *qp;
+	struct bnxt_qplib_q *rq;
 	u32 wr_id_idx;
 	int rc = 0;
 
@@ -2483,10 +2415,10 @@ static int bnxt_qplib_cq_process_res_ud(struct bnxt_qplib_cq *cq,
 					struct bnxt_qplib_cqe **pcqe,
 					int *budget)
 {
-	struct bnxt_qplib_qp *qp;
-	struct bnxt_qplib_q *rq;
 	struct bnxt_qplib_srq *srq;
 	struct bnxt_qplib_cqe *cqe;
+	struct bnxt_qplib_qp *qp;
+	struct bnxt_qplib_q *rq;
 	u32 wr_id_idx;
 	int rc = 0;
 
@@ -2561,15 +2493,13 @@ static int bnxt_qplib_cq_process_res_ud(struct bnxt_qplib_cq *cq,
 
 bool bnxt_qplib_is_cq_empty(struct bnxt_qplib_cq *cq)
 {
-	struct cq_base *hw_cqe, **hw_cqe_ptr;
+	struct cq_base *hw_cqe;
 	u32 sw_cons, raw_cons;
 	bool rc = true;
 
 	raw_cons = cq->hwq.cons;
 	sw_cons = HWQ_CMP(raw_cons, &cq->hwq);
-	hw_cqe_ptr = (struct cq_base **)cq->hwq.pbl_ptr;
-	hw_cqe = &hw_cqe_ptr[CQE_PG(sw_cons)][CQE_IDX(sw_cons)];
-
+	hw_cqe = bnxt_qplib_get_qe(&cq->hwq, sw_cons, NULL);
 	 /* Check for Valid bit. If the CQE is valid, return false */
 	rc = !CQE_CMP_VALID(hw_cqe, raw_cons, cq->hwq.max_elements);
 	return rc;
@@ -2813,7 +2743,7 @@ int bnxt_qplib_process_flush_list(struct bnxt_qplib_cq *cq,
 int bnxt_qplib_poll_cq(struct bnxt_qplib_cq *cq, struct bnxt_qplib_cqe *cqe,
 		       int num_cqes, struct bnxt_qplib_qp **lib_qp)
 {
-	struct cq_base *hw_cqe, **hw_cqe_ptr;
+	struct cq_base *hw_cqe;
 	u32 sw_cons, raw_cons;
 	int budget, rc = 0;
 
@@ -2822,8 +2752,7 @@ int bnxt_qplib_poll_cq(struct bnxt_qplib_cq *cq, struct bnxt_qplib_cqe *cqe,
 
 	while (budget) {
 		sw_cons = HWQ_CMP(raw_cons, &cq->hwq);
-		hw_cqe_ptr = (struct cq_base **)cq->hwq.pbl_ptr;
-		hw_cqe = &hw_cqe_ptr[CQE_PG(sw_cons)][CQE_IDX(sw_cons)];
+		hw_cqe = bnxt_qplib_get_qe(&cq->hwq, sw_cons, NULL);
 
 		/* Check for Valid bit */
 		if (!CQE_CMP_VALID(hw_cqe, raw_cons, cq->hwq.max_elements))
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.h b/drivers/infiniband/hw/bnxt_re/qplib_fp.h
index 7edb70b6bb16..568ca390322c 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.h
@@ -45,6 +45,7 @@ struct bnxt_qplib_srq {
 	struct bnxt_qplib_db_info	dbinfo;
 	u64				srq_handle;
 	u32				id;
+	u16				wqe_size;
 	u32				max_wqe;
 	u32				max_sge;
 	u32				threshold;
@@ -65,38 +66,7 @@ struct bnxt_qplib_sge {
 	u32				size;
 };
 
-#define BNXT_QPLIB_MAX_SQE_ENTRY_SIZE	sizeof(struct sq_send)
-
-#define SQE_CNT_PER_PG		(PAGE_SIZE / BNXT_QPLIB_MAX_SQE_ENTRY_SIZE)
-#define SQE_MAX_IDX_PER_PG	(SQE_CNT_PER_PG - 1)
-
-static inline u32 get_sqe_pg(u32 val)
-{
-	return ((val & ~SQE_MAX_IDX_PER_PG) / SQE_CNT_PER_PG);
-}
-
-static inline u32 get_sqe_idx(u32 val)
-{
-	return (val & SQE_MAX_IDX_PER_PG);
-}
-
-#define BNXT_QPLIB_MAX_PSNE_ENTRY_SIZE	sizeof(struct sq_psn_search)
-
-#define PSNE_CNT_PER_PG		(PAGE_SIZE / BNXT_QPLIB_MAX_PSNE_ENTRY_SIZE)
-#define PSNE_MAX_IDX_PER_PG	(PSNE_CNT_PER_PG - 1)
-
-static inline u32 get_psne_pg(u32 val)
-{
-	return ((val & ~PSNE_MAX_IDX_PER_PG) / PSNE_CNT_PER_PG);
-}
-
-static inline u32 get_psne_idx(u32 val)
-{
-	return (val & PSNE_MAX_IDX_PER_PG);
-}
-
 #define BNXT_QPLIB_QP_MAX_SGL	6
-
 struct bnxt_qplib_swq {
 	u64				wr_id;
 	int				next_idx;
@@ -226,19 +196,13 @@ struct bnxt_qplib_swqe {
 	};
 };
 
-#define BNXT_QPLIB_MAX_RQE_ENTRY_SIZE	sizeof(struct rq_wqe)
-
-#define RQE_CNT_PER_PG		(PAGE_SIZE / BNXT_QPLIB_MAX_RQE_ENTRY_SIZE)
-#define RQE_MAX_IDX_PER_PG	(RQE_CNT_PER_PG - 1)
-#define RQE_PG(x)		(((x) & ~RQE_MAX_IDX_PER_PG) / RQE_CNT_PER_PG)
-#define RQE_IDX(x)		((x) & RQE_MAX_IDX_PER_PG)
-
 struct bnxt_qplib_q {
 	struct bnxt_qplib_hwq		hwq;
 	struct bnxt_qplib_swq		*swq;
 	struct bnxt_qplib_db_info	dbinfo;
 	struct bnxt_qplib_sg_info	sg_info;
 	u32				max_wqe;
+	u16				wqe_size;
 	u16				q_full_delta;
 	u16				max_sge;
 	u32				psn;
@@ -256,7 +220,7 @@ struct bnxt_qplib_qp {
 	struct bnxt_qplib_dpi		*dpi;
 	struct bnxt_qplib_chip_ctx	*cctx;
 	u64				qp_handle;
-#define        BNXT_QPLIB_QP_ID_INVALID        0xFFFFFFFF
+#define BNXT_QPLIB_QP_ID_INVALID        0xFFFFFFFF
 	u32				id;
 	u8				type;
 	u8				sig_type;
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
index f01e864bb611..4e211162acee 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
@@ -89,10 +89,9 @@ static int __send_message(struct bnxt_qplib_rcfw *rcfw, struct cmdq_base *req,
 			  struct creq_base *resp, void *sb, u8 is_block)
 {
 	struct bnxt_qplib_cmdq_ctx *cmdq = &rcfw->cmdq;
-	struct bnxt_qplib_cmdqe *cmdqe, **hwq_ptr;
 	struct bnxt_qplib_hwq *hwq = &cmdq->hwq;
 	struct bnxt_qplib_crsqe *crsqe;
-	u32 cmdq_depth = rcfw->cmdq_depth;
+	struct bnxt_qplib_cmdqe *cmdqe;
 	u32 sw_prod, cmdq_prod;
 	struct pci_dev *pdev;
 	unsigned long flags;
@@ -163,13 +162,11 @@ static int __send_message(struct bnxt_qplib_rcfw *rcfw, struct cmdq_base *req,
 				  BNXT_QPLIB_CMDQE_UNITS;
 	}
 
-	hwq_ptr = (struct bnxt_qplib_cmdqe **)hwq->pbl_ptr;
 	preq = (u8 *)req;
 	do {
 		/* Locate the next cmdq slot */
 		sw_prod = HWQ_CMP(hwq->prod, hwq);
-		cmdqe = &hwq_ptr[get_cmdq_pg(sw_prod, cmdq_depth)]
-				[get_cmdq_idx(sw_prod, cmdq_depth)];
+		cmdqe = bnxt_qplib_get_qe(hwq, sw_prod, NULL);
 		if (!cmdqe) {
 			dev_err(&pdev->dev,
 				"RCFW request failed with no cmdqe!\n");
@@ -378,7 +375,7 @@ static void bnxt_qplib_service_creq(unsigned long data)
 	struct bnxt_qplib_creq_ctx *creq = &rcfw->creq;
 	u32 type, budget = CREQ_ENTRY_POLL_BUDGET;
 	struct bnxt_qplib_hwq *hwq = &creq->hwq;
-	struct creq_base *creqe, **hwq_ptr;
+	struct creq_base *creqe;
 	u32 sw_cons, raw_cons;
 	unsigned long flags;
 
@@ -387,8 +384,7 @@ static void bnxt_qplib_service_creq(unsigned long data)
 	raw_cons = hwq->cons;
 	while (budget > 0) {
 		sw_cons = HWQ_CMP(raw_cons, hwq);
-		hwq_ptr = (struct creq_base **)hwq->pbl_ptr;
-		creqe = &hwq_ptr[get_creq_pg(sw_cons)][get_creq_idx(sw_cons)];
+		creqe = bnxt_qplib_get_qe(hwq, sw_cons, NULL);
 		if (!CREQ_CMP_VALID(creqe, raw_cons, hwq->max_elements))
 			break;
 		/* The valid test of the entry must be done first before
@@ -434,7 +430,6 @@ static irqreturn_t bnxt_qplib_creq_irq(int irq, void *dev_instance)
 {
 	struct bnxt_qplib_rcfw *rcfw = dev_instance;
 	struct bnxt_qplib_creq_ctx *creq;
-	struct creq_base **creq_ptr;
 	struct bnxt_qplib_hwq *hwq;
 	u32 sw_cons;
 
@@ -442,8 +437,7 @@ static irqreturn_t bnxt_qplib_creq_irq(int irq, void *dev_instance)
 	hwq = &creq->hwq;
 	/* Prefetch the CREQ element */
 	sw_cons = HWQ_CMP(hwq->cons, hwq);
-	creq_ptr = (struct creq_base **)creq->hwq.pbl_ptr;
-	prefetch(&creq_ptr[get_creq_pg(sw_cons)][get_creq_idx(sw_cons)]);
+	prefetch(bnxt_qplib_get_qe(hwq, sw_cons, NULL));
 
 	tasklet_schedule(&creq->creq_tasklet);
 
@@ -468,29 +462,13 @@ int bnxt_qplib_deinit_rcfw(struct bnxt_qplib_rcfw *rcfw)
 	return 0;
 }
 
-static int __get_pbl_pg_idx(struct bnxt_qplib_pbl *pbl)
-{
-	return (pbl->pg_size == ROCE_PG_SIZE_4K ?
-				      CMDQ_INITIALIZE_FW_QPC_PG_SIZE_PG_4K :
-		pbl->pg_size == ROCE_PG_SIZE_8K ?
-				      CMDQ_INITIALIZE_FW_QPC_PG_SIZE_PG_8K :
-		pbl->pg_size == ROCE_PG_SIZE_64K ?
-				      CMDQ_INITIALIZE_FW_QPC_PG_SIZE_PG_64K :
-		pbl->pg_size == ROCE_PG_SIZE_2M ?
-				      CMDQ_INITIALIZE_FW_QPC_PG_SIZE_PG_2M :
-		pbl->pg_size == ROCE_PG_SIZE_8M ?
-				      CMDQ_INITIALIZE_FW_QPC_PG_SIZE_PG_8M :
-		pbl->pg_size == ROCE_PG_SIZE_1G ?
-				      CMDQ_INITIALIZE_FW_QPC_PG_SIZE_PG_1G :
-				      CMDQ_INITIALIZE_FW_QPC_PG_SIZE_PG_4K);
-}
-
 int bnxt_qplib_init_rcfw(struct bnxt_qplib_rcfw *rcfw,
 			 struct bnxt_qplib_ctx *ctx, int is_virtfn)
 {
-	struct cmdq_initialize_fw req;
 	struct creq_initialize_fw_resp resp;
-	u16 cmd_flags = 0, level;
+	struct cmdq_initialize_fw req;
+	u16 cmd_flags = 0;
+	u8 pgsz, lvl;
 	int rc;
 
 	RCFW_CMD_PREP(req, INITIALIZE_FW, cmd_flags);
@@ -511,32 +489,30 @@ int bnxt_qplib_init_rcfw(struct bnxt_qplib_rcfw *rcfw,
 	if (bnxt_qplib_is_chip_gen_p5(rcfw->res->cctx))
 		goto config_vf_res;
 
-	level = ctx->qpc_tbl.level;
-	req.qpc_pg_size_qpc_lvl = (level << CMDQ_INITIALIZE_FW_QPC_LVL_SFT) |
-				__get_pbl_pg_idx(&ctx->qpc_tbl.pbl[level]);
-	level = ctx->mrw_tbl.level;
-	req.mrw_pg_size_mrw_lvl = (level << CMDQ_INITIALIZE_FW_MRW_LVL_SFT) |
-				__get_pbl_pg_idx(&ctx->mrw_tbl.pbl[level]);
-	level = ctx->srqc_tbl.level;
-	req.srq_pg_size_srq_lvl = (level << CMDQ_INITIALIZE_FW_SRQ_LVL_SFT) |
-				__get_pbl_pg_idx(&ctx->srqc_tbl.pbl[level]);
-	level = ctx->cq_tbl.level;
-	req.cq_pg_size_cq_lvl = (level << CMDQ_INITIALIZE_FW_CQ_LVL_SFT) |
-				__get_pbl_pg_idx(&ctx->cq_tbl.pbl[level]);
-	level = ctx->srqc_tbl.level;
-	req.srq_pg_size_srq_lvl = (level << CMDQ_INITIALIZE_FW_SRQ_LVL_SFT) |
-				__get_pbl_pg_idx(&ctx->srqc_tbl.pbl[level]);
-	level = ctx->cq_tbl.level;
-	req.cq_pg_size_cq_lvl = (level << CMDQ_INITIALIZE_FW_CQ_LVL_SFT) |
-				__get_pbl_pg_idx(&ctx->cq_tbl.pbl[level]);
-	level = ctx->tim_tbl.level;
-	req.tim_pg_size_tim_lvl = (level << CMDQ_INITIALIZE_FW_TIM_LVL_SFT) |
-				  __get_pbl_pg_idx(&ctx->tim_tbl.pbl[level]);
-	level = ctx->tqm_ctx.pde.level;
-	req.tqm_pg_size_tqm_lvl =
-		(level << CMDQ_INITIALIZE_FW_TQM_LVL_SFT) |
-		 __get_pbl_pg_idx(&ctx->tqm_ctx.pde.pbl[level]);
-
+	lvl = ctx->qpc_tbl.level;
+	pgsz = bnxt_qplib_base_pg_size(&ctx->qpc_tbl);
+	req.qpc_pg_size_qpc_lvl = (pgsz << CMDQ_INITIALIZE_FW_QPC_PG_SIZE_SFT) |
+				   lvl;
+	lvl = ctx->mrw_tbl.level;
+	pgsz = bnxt_qplib_base_pg_size(&ctx->mrw_tbl);
+	req.mrw_pg_size_mrw_lvl = (pgsz << CMDQ_INITIALIZE_FW_QPC_PG_SIZE_SFT) |
+				   lvl;
+	lvl = ctx->srqc_tbl.level;
+	pgsz = bnxt_qplib_base_pg_size(&ctx->srqc_tbl);
+	req.srq_pg_size_srq_lvl = (pgsz << CMDQ_INITIALIZE_FW_QPC_PG_SIZE_SFT) |
+				   lvl;
+	lvl = ctx->cq_tbl.level;
+	pgsz = bnxt_qplib_base_pg_size(&ctx->cq_tbl);
+	req.cq_pg_size_cq_lvl = (pgsz << CMDQ_INITIALIZE_FW_QPC_PG_SIZE_SFT) |
+				 lvl;
+	lvl = ctx->tim_tbl.level;
+	pgsz = bnxt_qplib_base_pg_size(&ctx->tim_tbl);
+	req.tim_pg_size_tim_lvl = (pgsz << CMDQ_INITIALIZE_FW_QPC_PG_SIZE_SFT) |
+				   lvl;
+	lvl = ctx->tqm_ctx.pde.level;
+	pgsz = bnxt_qplib_base_pg_size(&ctx->tqm_ctx.pde);
+	req.tqm_pg_size_tqm_lvl = (pgsz << CMDQ_INITIALIZE_FW_QPC_PG_SIZE_SFT) |
+				   lvl;
 	req.qpc_page_dir =
 		cpu_to_le64(ctx->qpc_tbl.pbl[PBL_LVL_0].pg_map_arr[0]);
 	req.mrw_page_dir =
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h
index 411fce3493b6..157387636d00 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h
@@ -87,12 +87,6 @@ static inline u32 bnxt_qplib_cmdqe_page_size(u32 depth)
 	return (bnxt_qplib_cmdqe_npages(depth) * PAGE_SIZE);
 }
 
-static inline u32 bnxt_qplib_cmdqe_cnt_per_pg(u32 depth)
-{
-	return (bnxt_qplib_cmdqe_page_size(depth) /
-		 BNXT_QPLIB_CMDQE_UNITS);
-}
-
 /* Set the cmd_size to a factor of CMDQE unit */
 static inline void bnxt_qplib_set_cmd_slots(struct cmdq_base *req)
 {
@@ -100,30 +94,12 @@ static inline void bnxt_qplib_set_cmd_slots(struct cmdq_base *req)
 			 BNXT_QPLIB_CMDQE_UNITS;
 }
 
-#define MAX_CMDQ_IDX(depth)		((depth) - 1)
-
-static inline u32 bnxt_qplib_max_cmdq_idx_per_pg(u32 depth)
-{
-	return (bnxt_qplib_cmdqe_cnt_per_pg(depth) - 1);
-}
-
 #define RCFW_MAX_COOKIE_VALUE		0x7FFF
 #define RCFW_CMD_IS_BLOCKING		0x8000
 #define RCFW_BLOCKED_CMD_WAIT_COUNT	0x4E20
 
 #define HWRM_VERSION_RCFW_CMDQ_DEPTH_CHECK 0x1000900020011ULL
 
-static inline u32 get_cmdq_pg(u32 val, u32 depth)
-{
-	return (val & ~(bnxt_qplib_max_cmdq_idx_per_pg(depth))) /
-		(bnxt_qplib_cmdqe_cnt_per_pg(depth));
-}
-
-static inline u32 get_cmdq_idx(u32 val, u32 depth)
-{
-	return val & (bnxt_qplib_max_cmdq_idx_per_pg(depth));
-}
-
 /* Crsq buf is 1024-Byte */
 struct bnxt_qplib_crsbe {
 	u8			data[1024];
@@ -133,76 +109,9 @@ struct bnxt_qplib_crsbe {
 /* Allocate 1 per QP for async error notification for now */
 #define BNXT_QPLIB_CREQE_MAX_CNT	(64 * 1024)
 #define BNXT_QPLIB_CREQE_UNITS		16	/* 16-Bytes per prod unit */
-#define BNXT_QPLIB_CREQE_CNT_PER_PG	(PAGE_SIZE / BNXT_QPLIB_CREQE_UNITS)
-
-#define MAX_CREQ_IDX			(BNXT_QPLIB_CREQE_MAX_CNT - 1)
-#define MAX_CREQ_IDX_PER_PG		(BNXT_QPLIB_CREQE_CNT_PER_PG - 1)
-
-static inline u32 get_creq_pg(u32 val)
-{
-	return (val & ~MAX_CREQ_IDX_PER_PG) / BNXT_QPLIB_CREQE_CNT_PER_PG;
-}
-
-static inline u32 get_creq_idx(u32 val)
-{
-	return val & MAX_CREQ_IDX_PER_PG;
-}
-
-#define BNXT_QPLIB_CREQE_PER_PG	(PAGE_SIZE / sizeof(struct creq_base))
-
 #define CREQ_CMP_VALID(hdr, raw_cons, cp_bit)			\
 	(!!((hdr)->v & CREQ_BASE_V) ==				\
 	   !((raw_cons) & (cp_bit)))
-
-#define CREQ_DB_KEY_CP			(0x2 << CMPL_DOORBELL_KEY_SFT)
-#define CREQ_DB_IDX_VALID		CMPL_DOORBELL_IDX_VALID
-#define CREQ_DB_IRQ_DIS			CMPL_DOORBELL_MASK
-#define CREQ_DB_CP_FLAGS_REARM		(CREQ_DB_KEY_CP |	\
-					 CREQ_DB_IDX_VALID)
-#define CREQ_DB_CP_FLAGS		(CREQ_DB_KEY_CP |	\
-					 CREQ_DB_IDX_VALID |	\
-					 CREQ_DB_IRQ_DIS)
-
-static inline void bnxt_qplib_ring_creq_db64(void __iomem *db, u32 index,
-					     u32 xid, bool arm)
-{
-	u64 val = 0;
-
-	val = xid & DBC_DBC_XID_MASK;
-	val |= DBC_DBC_PATH_ROCE;
-	val |= arm ? DBC_DBC_TYPE_NQ_ARM : DBC_DBC_TYPE_NQ;
-	val <<= 32;
-	val |= index & DBC_DBC_INDEX_MASK;
-
-	writeq(val, db);
-}
-
-static inline void bnxt_qplib_ring_creq_db_rearm(void __iomem *db, u32 raw_cons,
-						 u32 max_elements, u32 xid,
-						 bool gen_p5)
-{
-	u32 index = raw_cons & (max_elements - 1);
-
-	if (gen_p5)
-		bnxt_qplib_ring_creq_db64(db, index, xid, true);
-	else
-		writel(CREQ_DB_CP_FLAGS_REARM | (index & DBC_DBC32_XID_MASK),
-		       db);
-}
-
-static inline void bnxt_qplib_ring_creq_db(void __iomem *db, u32 raw_cons,
-					   u32 max_elements, u32 xid,
-					   bool gen_p5)
-{
-	u32 index = raw_cons & (max_elements - 1);
-
-	if (gen_p5)
-		bnxt_qplib_ring_creq_db64(db, index, xid, true);
-	else
-		writel(CREQ_DB_CP_FLAGS | (index & DBC_DBC32_XID_MASK),
-		       db);
-}
-
 #define CREQ_ENTRY_POLL_BUDGET		0x100
 
 /* HWQ */
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_res.c b/drivers/infiniband/hw/bnxt_re/qplib_res.c
index cab1adf1fed9..7efa6e5dce62 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_res.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_res.c
@@ -347,6 +347,7 @@ int bnxt_qplib_alloc_init_hwq(struct bnxt_qplib_hwq *hwq,
 	hwq->depth = hwq_attr->depth;
 	hwq->max_elements = depth;
 	hwq->element_size = stride;
+	hwq->qe_ppg = pg_size / stride;
 	/* For direct access to the elements */
 	lvl = hwq->level;
 	if (hwq_attr->sginfo->nopte && hwq->level)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_res.h b/drivers/infiniband/hw/bnxt_re/qplib_res.h
index 95b645dbbc2d..c29cbd3a2d7b 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_res.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_res.h
@@ -80,6 +80,15 @@ enum bnxt_qplib_pbl_lvl {
 #define ROCE_PG_SIZE_8M		(8 * 1024 * 1024)
 #define ROCE_PG_SIZE_1G		(1024 * 1024 * 1024)
 
+enum bnxt_qplib_hwrm_pg_size {
+	BNXT_QPLIB_HWRM_PG_SIZE_4K	= 0,
+	BNXT_QPLIB_HWRM_PG_SIZE_8K	= 1,
+	BNXT_QPLIB_HWRM_PG_SIZE_64K	= 2,
+	BNXT_QPLIB_HWRM_PG_SIZE_2M	= 3,
+	BNXT_QPLIB_HWRM_PG_SIZE_8M	= 4,
+	BNXT_QPLIB_HWRM_PG_SIZE_1G	= 5,
+};
+
 struct bnxt_qplib_reg_desc {
 	u8		bar_id;
 	resource_size_t	bar_base;
@@ -126,6 +135,7 @@ struct bnxt_qplib_hwq {
 	u32				max_elements;
 	u32				depth;
 	u16				element_size;	/* Size of each entry */
+	u16				qe_ppg;	/* queue entry per page */
 
 	u32				prod;		/* raw */
 	u32				cons;		/* raw */
@@ -263,6 +273,49 @@ static inline u8 bnxt_qplib_get_ring_type(struct bnxt_qplib_chip_ctx *cctx)
 	       RING_ALLOC_REQ_RING_TYPE_ROCE_CMPL;
 }
 
+static inline u8 bnxt_qplib_base_pg_size(struct bnxt_qplib_hwq *hwq)
+{
+	u8 pg_size = BNXT_QPLIB_HWRM_PG_SIZE_4K;
+	struct bnxt_qplib_pbl *pbl;
+
+	pbl = &hwq->pbl[PBL_LVL_0];
+	switch (pbl->pg_size) {
+	case ROCE_PG_SIZE_4K:
+		pg_size = BNXT_QPLIB_HWRM_PG_SIZE_4K;
+		break;
+	case ROCE_PG_SIZE_8K:
+		pg_size = BNXT_QPLIB_HWRM_PG_SIZE_8K;
+		break;
+	case ROCE_PG_SIZE_64K:
+		pg_size = BNXT_QPLIB_HWRM_PG_SIZE_64K;
+		break;
+	case ROCE_PG_SIZE_2M:
+		pg_size = BNXT_QPLIB_HWRM_PG_SIZE_2M;
+		break;
+	case ROCE_PG_SIZE_8M:
+		pg_size = BNXT_QPLIB_HWRM_PG_SIZE_8M;
+		break;
+	case ROCE_PG_SIZE_1G:
+		pg_size = BNXT_QPLIB_HWRM_PG_SIZE_1G;
+		break;
+	default:
+		break;
+	}
+
+	return pg_size;
+}
+
+static inline void *bnxt_qplib_get_qe(struct bnxt_qplib_hwq *hwq,
+				      u32 indx, u64 *pg)
+{
+	u32 pg_num, pg_idx;
+
+	pg_num = (indx / hwq->qe_ppg);
+	pg_idx = (indx % hwq->qe_ppg);
+	if (pg)
+		*pg = (u64)&hwq->pbl_ptr[pg_num];
+	return (void *)(hwq->pbl_ptr[pg_num] + hwq->element_size * pg_idx);
+}
 
 #define to_bnxt_qplib(ptr, type, member)	\
 	container_of(ptr, type, member)
diff --git a/drivers/infiniband/hw/bnxt_re/roce_hsi.h b/drivers/infiniband/hw/bnxt_re/roce_hsi.h
index e4b09e7c2175..6f00f07420b7 100644
--- a/drivers/infiniband/hw/bnxt_re/roce_hsi.h
+++ b/drivers/infiniband/hw/bnxt_re/roce_hsi.h
@@ -210,6 +210,20 @@ struct sq_send {
 	__le32 data[24];
 };
 
+/* sq_send_hdr (size:256b/32B) */
+struct sq_send_hdr {
+	u8	wqe_type;
+	u8	flags;
+	u8	wqe_size;
+	u8	reserved8_1;
+	__le32	inv_key_or_imm_data;
+	__le32	length;
+	__le32	q_key;
+	__le32	dst_qp;
+	__le32	avid;
+	__le64	reserved64;
+};
+
 /* Send Raw Ethernet and QP1 SQ WQE (40 bytes) */
 struct sq_send_raweth_qp1 {
 	u8 wqe_type;
@@ -265,6 +279,21 @@ struct sq_send_raweth_qp1 {
 	__le32 data[24];
 };
 
+/* sq_send_raweth_qp1_hdr (size:256b/32B) */
+struct sq_send_raweth_qp1_hdr {
+	u8	wqe_type;
+	u8	flags;
+	u8	wqe_size;
+	u8	reserved8;
+	__le16	lflags;
+	__le16	cfa_action;
+	__le32	length;
+	__le32	reserved32_1;
+	__le32	cfa_meta;
+	__le32	reserved32_2;
+	__le64	reserved64;
+};
+
 /* RDMA SQ WQE (40 bytes) */
 struct sq_rdma {
 	u8 wqe_type;
@@ -288,6 +317,20 @@ struct sq_rdma {
 	__le32 data[24];
 };
 
+/* sq_rdma_hdr (size:256b/32B) */
+struct sq_rdma_hdr {
+	u8	wqe_type;
+	u8	flags;
+	u8	wqe_size;
+	u8	reserved8;
+	__le32	imm_data;
+	__le32	length;
+	__le32	reserved32_1;
+	__le64	remote_va;
+	__le32	remote_key;
+	__le32	reserved32_2;
+};
+
 /* Atomic SQ WQE (40 bytes) */
 struct sq_atomic {
 	u8 wqe_type;
@@ -307,6 +350,17 @@ struct sq_atomic {
 	__le32 data[24];
 };
 
+/* sq_atomic_hdr (size:256b/32B) */
+struct sq_atomic_hdr {
+	u8	wqe_type;
+	u8	flags;
+	__le16	reserved16;
+	__le32	remote_key;
+	__le64	remote_va;
+	__le64	swap_data;
+	__le64	cmp_data;
+};
+
 /* Local Invalidate SQ WQE (40 bytes) */
 struct sq_localinvalidate {
 	u8 wqe_type;
@@ -324,6 +378,16 @@ struct sq_localinvalidate {
 	__le32 data[24];
 };
 
+/* sq_localinvalidate_hdr (size:256b/32B) */
+struct sq_localinvalidate_hdr {
+	u8	wqe_type;
+	u8	flags;
+	__le16	reserved16;
+	__le32	inv_l_key;
+	__le64	reserved64;
+	u8	reserved128[16];
+};
+
 /* FR-PMR SQ WQE (40 bytes) */
 struct sq_fr_pmr {
 	u8 wqe_type;
@@ -380,6 +444,21 @@ struct sq_fr_pmr {
 	__le32 data[24];
 };
 
+/* sq_fr_pmr_hdr (size:256b/32B) */
+struct sq_fr_pmr_hdr {
+	u8	wqe_type;
+	u8	flags;
+	u8	access_cntl;
+	u8	zero_based_page_size_log;
+	__le32	l_key;
+	u8	length[5];
+	u8	reserved8_1;
+	u8	reserved8_2;
+	u8	numlevels_pbl_page_size_log;
+	__le64	pblptr;
+	__le64	va;
+};
+
 /* Bind SQ WQE (40 bytes) */
 struct sq_bind {
 	u8 wqe_type;
@@ -417,6 +496,22 @@ struct sq_bind {
 	#define SQ_BIND_DATA_SFT				    0
 };
 
+/* sq_bind_hdr (size:256b/32B) */
+struct sq_bind_hdr {
+	u8	wqe_type;
+	u8	flags;
+	u8	access_cntl;
+	u8	reserved8_1;
+	u8	mw_type_zero_based;
+	u8	reserved8_2;
+	__le16	reserved16;
+	__le32	parent_l_key;
+	__le32	l_key;
+	__le64	va;
+	u8	length[5];
+	u8	reserved24[3];
+};
+
 /* RQ/SRQ WQE Structures */
 /* RQ/SRQ WQE (40 bytes) */
 struct rq_wqe {
@@ -435,6 +530,17 @@ struct rq_wqe {
 	__le32 data[24];
 };
 
+/* rq_wqe_hdr (size:256b/32B) */
+struct rq_wqe_hdr {
+	u8	wqe_type;
+	u8	flags;
+	u8	wqe_size;
+	u8	reserved8;
+	__le32	reserved32;
+	__le32	wr_id[2];
+	u8	reserved128[16];
+};
+
 /* CQ CQE Structures */
 /* Base CQE (32 bytes) */
 struct cq_base {
diff --git a/drivers/infiniband/hw/hns/hns_roce_alloc.c b/drivers/infiniband/hw/hns/hns_roce_alloc.c
index da574c26e063..e04e7596d979 100644
--- a/drivers/infiniband/hw/hns/hns_roce_alloc.c
+++ b/drivers/infiniband/hw/hns/hns_roce_alloc.c
@@ -157,84 +157,78 @@ void hns_roce_bitmap_cleanup(struct hns_roce_bitmap *bitmap)
 	kfree(bitmap->table);
 }
 
-void hns_roce_buf_free(struct hns_roce_dev *hr_dev, u32 size,
-		       struct hns_roce_buf *buf)
+void hns_roce_buf_free(struct hns_roce_dev *hr_dev, struct hns_roce_buf *buf)
 {
-	int i;
 	struct device *dev = hr_dev->dev;
+	u32 size = buf->size;
+	int i;
+
+	if (size == 0)
+		return;
+
+	buf->size = 0;
 
-	if (buf->nbufs == 1) {
+	if (hns_roce_buf_is_direct(buf)) {
 		dma_free_coherent(dev, size, buf->direct.buf, buf->direct.map);
 	} else {
-		for (i = 0; i < buf->nbufs; ++i)
+		for (i = 0; i < buf->npages; ++i)
 			if (buf->page_list[i].buf)
 				dma_free_coherent(dev, 1 << buf->page_shift,
 						  buf->page_list[i].buf,
 						  buf->page_list[i].map);
 		kfree(buf->page_list);
+		buf->page_list = NULL;
 	}
 }
 
 int hns_roce_buf_alloc(struct hns_roce_dev *hr_dev, u32 size, u32 max_direct,
 		       struct hns_roce_buf *buf, u32 page_shift)
 {
-	int i = 0;
-	dma_addr_t t;
+	struct hns_roce_buf_list *buf_list;
 	struct device *dev = hr_dev->dev;
-	u32 page_size = 1 << page_shift;
-	u32 order;
+	u32 page_size;
+	int i;
+
+	/* The minimum shift of the page accessed by hw is PAGE_ADDR_SHIFT */
+	buf->page_shift = max_t(int, PAGE_ADDR_SHIFT, page_shift);
 
-	/* SQ/RQ buf lease than one page, SQ + RQ = 8K */
+	page_size = 1 << buf->page_shift;
+	buf->npages = DIV_ROUND_UP(size, page_size);
+
+	/* required size is not bigger than one trunk size */
 	if (size <= max_direct) {
-		buf->nbufs = 1;
-		/* Npages calculated by page_size */
-		order = get_order(size);
-		if (order <= page_shift - PAGE_SHIFT)
-			order = 0;
-		else
-			order -= page_shift - PAGE_SHIFT;
-		buf->npages = 1 << order;
-		buf->page_shift = page_shift;
-		/* MTT PA must be recorded in 4k alignment, t is 4k aligned */
-		buf->direct.buf = dma_alloc_coherent(dev, size, &t,
+		buf->page_list = NULL;
+		buf->direct.buf = dma_alloc_coherent(dev, size,
+						     &buf->direct.map,
 						     GFP_KERNEL);
 		if (!buf->direct.buf)
 			return -ENOMEM;
-
-		buf->direct.map = t;
-
-		while (t & ((1 << buf->page_shift) - 1)) {
-			--buf->page_shift;
-			buf->npages *= 2;
-		}
 	} else {
-		buf->nbufs = (size + page_size - 1) / page_size;
-		buf->npages = buf->nbufs;
-		buf->page_shift = page_shift;
-		buf->page_list = kcalloc(buf->nbufs, sizeof(*buf->page_list),
-					 GFP_KERNEL);
-
-		if (!buf->page_list)
+		buf_list = kcalloc(buf->npages, sizeof(*buf_list), GFP_KERNEL);
+		if (!buf_list)
 			return -ENOMEM;
 
-		for (i = 0; i < buf->nbufs; ++i) {
-			buf->page_list[i].buf = dma_alloc_coherent(dev,
-								   page_size,
-								   &t,
-								   GFP_KERNEL);
-
-			if (!buf->page_list[i].buf)
-				goto err_free;
+		for (i = 0; i < buf->npages; i++) {
+			buf_list[i].buf = dma_alloc_coherent(dev, page_size,
+							     &buf_list[i].map,
+							     GFP_KERNEL);
+			if (!buf_list[i].buf)
+				break;
+		}
 
-			buf->page_list[i].map = t;
+		if (i != buf->npages && i > 0) {
+			while (i-- > 0)
+				dma_free_coherent(dev, page_size,
+						  buf_list[i].buf,
+						  buf_list[i].map);
+			kfree(buf_list);
+			return -ENOMEM;
 		}
+		buf->page_list = buf_list;
 	}
+	buf->size = size;
 
 	return 0;
-
-err_free:
-	hns_roce_buf_free(hr_dev, size, buf);
-	return -ENOMEM;
 }
 
 int hns_roce_get_kmem_bufs(struct hns_roce_dev *hr_dev, dma_addr_t *bufs,
@@ -246,18 +240,14 @@ int hns_roce_get_kmem_bufs(struct hns_roce_dev *hr_dev, dma_addr_t *bufs,
 	end = start + buf_cnt;
 	if (end > buf->npages) {
 		dev_err(hr_dev->dev,
-			"invalid kmem region,offset %d,buf_cnt %d,total %d!\n",
+			"Failed to check kmem bufs, end %d + %d total %d!\n",
 			start, buf_cnt, buf->npages);
 		return -EINVAL;
 	}
 
 	total = 0;
 	for (i = start; i < end; i++)
-		if (buf->nbufs == 1)
-			bufs[total++] = buf->direct.map +
-					((dma_addr_t)i << buf->page_shift);
-		else
-			bufs[total++] = buf->page_list[i].map;
+		bufs[total++] = hns_roce_buf_page(buf, i);
 
 	return total;
 }
@@ -271,8 +261,9 @@ int hns_roce_get_umem_bufs(struct hns_roce_dev *hr_dev, dma_addr_t *bufs,
 	int idx = 0;
 	u64 addr;
 
-	if (page_shift < PAGE_SHIFT) {
-		dev_err(hr_dev->dev, "invalid page shift %d!\n", page_shift);
+	if (page_shift < PAGE_ADDR_SHIFT) {
+		dev_err(hr_dev->dev, "Failed to check umem page shift %d!\n",
+			page_shift);
 		return -EINVAL;
 	}
 
diff --git a/drivers/infiniband/hw/hns/hns_roce_cq.c b/drivers/infiniband/hw/hns/hns_roce_cq.c
index 5bfb52ffd590..d2d7074bbe69 100644
--- a/drivers/infiniband/hw/hns/hns_roce_cq.c
+++ b/drivers/infiniband/hw/hns/hns_roce_cq.c
@@ -39,51 +39,40 @@
 #include <rdma/hns-abi.h>
 #include "hns_roce_common.h"
 
-static int hns_roce_alloc_cqc(struct hns_roce_dev *hr_dev,
-			      struct hns_roce_cq *hr_cq)
+static int alloc_cqc(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq)
 {
 	struct hns_roce_cmd_mailbox *mailbox;
-	struct hns_roce_hem_table *mtt_table;
 	struct hns_roce_cq_table *cq_table;
-	struct device *dev = hr_dev->dev;
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	u64 mtts[MTT_MIN_COUNT] = { 0 };
 	dma_addr_t dma_handle;
-	u64 *mtts;
 	int ret;
 
-	cq_table = &hr_dev->cq_table;
-
-	/* Get the physical address of cq buf */
-	if (hns_roce_check_whether_mhop(hr_dev, HEM_TYPE_CQE))
-		mtt_table = &hr_dev->mr_table.mtt_cqe_table;
-	else
-		mtt_table = &hr_dev->mr_table.mtt_table;
-
-	mtts = hns_roce_table_find(hr_dev, mtt_table, hr_cq->mtt.first_seg,
-				   &dma_handle);
-
-	if (!mtts) {
-		dev_err(dev, "Failed to find mtt for CQ buf.\n");
+	ret = hns_roce_mtr_find(hr_dev, &hr_cq->mtr, 0, mtts, ARRAY_SIZE(mtts),
+				&dma_handle);
+	if (ret < 1) {
+		ibdev_err(ibdev, "Failed to find CQ mtr\n");
 		return -EINVAL;
 	}
 
+	cq_table = &hr_dev->cq_table;
 	ret = hns_roce_bitmap_alloc(&cq_table->bitmap, &hr_cq->cqn);
 	if (ret) {
-		dev_err(dev, "Num of CQ out of range.\n");
+		ibdev_err(ibdev, "Failed to alloc CQ bitmap, err %d\n", ret);
 		return ret;
 	}
 
 	/* Get CQC memory HEM(Hardware Entry Memory) table */
 	ret = hns_roce_table_get(hr_dev, &cq_table->table, hr_cq->cqn);
 	if (ret) {
-		dev_err(dev,
-			"Get context mem failed(%d) when CQ(0x%lx) alloc.\n",
-			ret, hr_cq->cqn);
+		ibdev_err(ibdev, "Failed to get CQ(0x%lx) context, err %d\n",
+			  hr_cq->cqn, ret);
 		goto err_out;
 	}
 
 	ret = xa_err(xa_store(&cq_table->array, hr_cq->cqn, hr_cq, GFP_KERNEL));
 	if (ret) {
-		dev_err(dev, "Failed to xa_store CQ.\n");
+		ibdev_err(ibdev, "Failed to xa_store CQ\n");
 		goto err_put;
 	}
 
@@ -101,9 +90,9 @@ static int hns_roce_alloc_cqc(struct hns_roce_dev *hr_dev,
 			HNS_ROCE_CMD_CREATE_CQC, HNS_ROCE_CMD_TIMEOUT_MSECS);
 	hns_roce_free_cmd_mailbox(hr_dev, mailbox);
 	if (ret) {
-		dev_err(dev,
-			"Send cmd mailbox failed(%d) when CQ(0x%lx) alloc.\n",
-			ret, hr_cq->cqn);
+		ibdev_err(ibdev,
+			  "Failed to send create cmd for CQ(0x%lx), err %d\n",
+			  hr_cq->cqn, ret);
 		goto err_xa;
 	}
 
@@ -126,7 +115,7 @@ static int hns_roce_alloc_cqc(struct hns_roce_dev *hr_dev,
 	return ret;
 }
 
-void hns_roce_free_cqc(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq)
+static void free_cqc(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq)
 {
 	struct hns_roce_cq_table *cq_table = &hr_dev->cq_table;
 	struct device *dev = hr_dev->dev;
@@ -153,190 +142,86 @@ void hns_roce_free_cqc(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq)
 	hns_roce_bitmap_free(&cq_table->bitmap, hr_cq->cqn, BITMAP_NO_RR);
 }
 
-static int get_cq_umem(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq,
-		       struct hns_roce_ib_create_cq ucmd,
-		       struct ib_udata *udata)
-{
-	struct hns_roce_buf *buf = &hr_cq->buf;
-	struct hns_roce_mtt *mtt = &hr_cq->mtt;
-	struct ib_umem **umem = &hr_cq->umem;
-	u32 npages;
-	int ret;
-
-	*umem = ib_umem_get(&hr_dev->ib_dev, ucmd.buf_addr, buf->size,
-			    IB_ACCESS_LOCAL_WRITE);
-	if (IS_ERR(*umem))
-		return PTR_ERR(*umem);
-
-	if (hns_roce_check_whether_mhop(hr_dev, HEM_TYPE_CQE))
-		mtt->mtt_type = MTT_TYPE_CQE;
-	else
-		mtt->mtt_type = MTT_TYPE_WQE;
-
-	npages = DIV_ROUND_UP(ib_umem_page_count(*umem),
-			      1 << hr_dev->caps.cqe_buf_pg_sz);
-	ret = hns_roce_mtt_init(hr_dev, npages, buf->page_shift, mtt);
-	if (ret)
-		goto err_buf;
-
-	ret = hns_roce_ib_umem_write_mtt(hr_dev, mtt, *umem);
-	if (ret)
-		goto err_mtt;
-
-	return 0;
-
-err_mtt:
-	hns_roce_mtt_cleanup(hr_dev, mtt);
-
-err_buf:
-	ib_umem_release(*umem);
-	return ret;
-}
-
-static int alloc_cq_buf(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq)
+static int alloc_cq_buf(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq,
+			struct ib_udata *udata, unsigned long addr)
 {
-	struct hns_roce_buf *buf = &hr_cq->buf;
-	struct hns_roce_mtt *mtt = &hr_cq->mtt;
-	int ret;
-
-	ret = hns_roce_buf_alloc(hr_dev, buf->size, (1 << buf->page_shift) * 2,
-				 buf, buf->page_shift);
-	if (ret)
-		goto out;
-
-	if (hns_roce_check_whether_mhop(hr_dev, HEM_TYPE_CQE))
-		mtt->mtt_type = MTT_TYPE_CQE;
-	else
-		mtt->mtt_type = MTT_TYPE_WQE;
-
-	ret = hns_roce_mtt_init(hr_dev, buf->npages, buf->page_shift, mtt);
-	if (ret)
-		goto err_buf;
-
-	ret = hns_roce_buf_write_mtt(hr_dev, mtt, buf);
-	if (ret)
-		goto err_mtt;
-
-	return 0;
-
-err_mtt:
-	hns_roce_mtt_cleanup(hr_dev, mtt);
-
-err_buf:
-	hns_roce_buf_free(hr_dev, buf->size, buf);
-
-out:
-	return ret;
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	struct hns_roce_buf_attr buf_attr = {};
+	int err;
+
+	buf_attr.page_shift = hr_dev->caps.cqe_buf_pg_sz + PAGE_ADDR_SHIFT;
+	buf_attr.region[0].size = hr_cq->cq_depth * hr_dev->caps.cq_entry_sz;
+	buf_attr.region[0].hopnum = hr_dev->caps.cqe_hop_num;
+	buf_attr.region_count = 1;
+	buf_attr.fixed_page = true;
+
+	err = hns_roce_mtr_create(hr_dev, &hr_cq->mtr, &buf_attr,
+				  hr_dev->caps.cqe_ba_pg_sz + PAGE_ADDR_SHIFT,
+				  udata, addr);
+	if (err)
+		ibdev_err(ibdev, "Failed to alloc CQ mtr, err %d\n", err);
+
+	return err;
 }
 
 static void free_cq_buf(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq)
 {
-	hns_roce_buf_free(hr_dev, hr_cq->buf.size, &hr_cq->buf);
+	hns_roce_mtr_destroy(hr_dev, &hr_cq->mtr);
 }
 
-static int create_user_cq(struct hns_roce_dev *hr_dev,
-			  struct hns_roce_cq *hr_cq,
-			  struct ib_udata *udata,
-			  struct hns_roce_ib_create_cq_resp *resp)
+static int alloc_cq_db(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq,
+		       struct ib_udata *udata, unsigned long addr,
+		       struct hns_roce_ib_create_cq_resp *resp)
 {
-	struct hns_roce_ib_create_cq ucmd;
-	struct device *dev = hr_dev->dev;
-	int ret;
-	struct hns_roce_ucontext *context = rdma_udata_to_drv_context(
-				   udata, struct hns_roce_ucontext, ibucontext);
-
-	if (ib_copy_from_udata(&ucmd, udata, sizeof(ucmd))) {
-		dev_err(dev, "Failed to copy_from_udata.\n");
-		return -EFAULT;
-	}
+	bool has_db = hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_RECORD_DB;
+	struct hns_roce_ucontext *uctx;
+	int err;
 
-	/* Get user space address, write it into mtt table */
-	ret = get_cq_umem(hr_dev, hr_cq, ucmd, udata);
-	if (ret) {
-		dev_err(dev, "Failed to get_cq_umem.\n");
-		return ret;
-	}
-
-	if (hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_RECORD_DB &&
-	    udata->outlen >= offsetofend(typeof(*resp), cap_flags)) {
-		ret = hns_roce_db_map_user(context, udata, ucmd.db_addr,
-					   &hr_cq->db);
-		if (ret) {
-			dev_err(dev, "cq record doorbell map failed!\n");
-			goto err_mtt;
+	if (udata) {
+		if (has_db &&
+		    udata->outlen >= offsetofend(typeof(*resp), cap_flags)) {
+			uctx = rdma_udata_to_drv_context(udata,
+					struct hns_roce_ucontext, ibucontext);
+			err = hns_roce_db_map_user(uctx, udata, addr,
+						   &hr_cq->db);
+			if (err)
+				return err;
+			hr_cq->db_en = 1;
+			resp->cap_flags |= HNS_ROCE_SUPPORT_CQ_RECORD_DB;
 		}
-		hr_cq->db_en = 1;
-		resp->cap_flags |= HNS_ROCE_SUPPORT_CQ_RECORD_DB;
-	}
-
-	return 0;
-
-err_mtt:
-	hns_roce_mtt_cleanup(hr_dev, &hr_cq->mtt);
-	ib_umem_release(hr_cq->umem);
-
-	return ret;
-}
-
-static int create_kernel_cq(struct hns_roce_dev *hr_dev,
-			    struct hns_roce_cq *hr_cq)
-{
-	struct device *dev = hr_dev->dev;
-	int ret;
-
-	if (hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_RECORD_DB) {
-		ret = hns_roce_alloc_db(hr_dev, &hr_cq->db, 1);
-		if (ret)
-			return ret;
-
-		hr_cq->set_ci_db = hr_cq->db.db_record;
-		*hr_cq->set_ci_db = 0;
-		hr_cq->db_en = 1;
-	}
-
-	/* Init mtt table and write buff address to mtt table */
-	ret = alloc_cq_buf(hr_dev, hr_cq);
-	if (ret) {
-		dev_err(dev, "Failed to alloc_cq_buf.\n");
-		goto err_db;
+	} else {
+		if (has_db) {
+			err = hns_roce_alloc_db(hr_dev, &hr_cq->db, 1);
+			if (err)
+				return err;
+			hr_cq->set_ci_db = hr_cq->db.db_record;
+			*hr_cq->set_ci_db = 0;
+			hr_cq->db_en = 1;
+		}
+		hr_cq->cq_db_l = hr_dev->reg_base + hr_dev->odb_offset +
+				 DB_REG_OFFSET * hr_dev->priv_uar.index;
 	}
 
-	hr_cq->cq_db_l = hr_dev->reg_base + hr_dev->odb_offset +
-			 DB_REG_OFFSET * hr_dev->priv_uar.index;
-
 	return 0;
-
-err_db:
-	if (hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_RECORD_DB)
-		hns_roce_free_db(hr_dev, &hr_cq->db);
-
-	return ret;
 }
 
-static void destroy_user_cq(struct hns_roce_dev *hr_dev,
-			    struct hns_roce_cq *hr_cq,
-			    struct ib_udata *udata,
-			    struct hns_roce_ib_create_cq_resp *resp)
+static void free_cq_db(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq,
+		       struct ib_udata *udata)
 {
-	struct hns_roce_ucontext *context = rdma_udata_to_drv_context(
-				   udata, struct hns_roce_ucontext, ibucontext);
+	struct hns_roce_ucontext *uctx;
 
-	if (hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_RECORD_DB &&
-	    udata->outlen >= offsetofend(typeof(*resp), cap_flags))
-		hns_roce_db_unmap_user(context, &hr_cq->db);
-
-	hns_roce_mtt_cleanup(hr_dev, &hr_cq->mtt);
-	ib_umem_release(hr_cq->umem);
-}
-
-static void destroy_kernel_cq(struct hns_roce_dev *hr_dev,
-			      struct hns_roce_cq *hr_cq)
-{
-	hns_roce_mtt_cleanup(hr_dev, &hr_cq->mtt);
-	free_cq_buf(hr_dev, hr_cq);
+	if (!hr_cq->db_en)
+		return;
 
-	if (hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_RECORD_DB)
+	hr_cq->db_en = 0;
+	if (udata) {
+		uctx = rdma_udata_to_drv_context(udata,
+						 struct hns_roce_ucontext,
+						 ibucontext);
+		hns_roce_db_unmap_user(uctx, &hr_cq->db);
+	} else {
 		hns_roce_free_db(hr_dev, &hr_cq->db);
+	}
 }
 
 int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr,
@@ -345,20 +230,21 @@ int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr,
 	struct hns_roce_dev *hr_dev = to_hr_dev(ib_cq->device);
 	struct hns_roce_ib_create_cq_resp resp = {};
 	struct hns_roce_cq *hr_cq = to_hr_cq(ib_cq);
-	struct device *dev = hr_dev->dev;
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	struct hns_roce_ib_create_cq ucmd = {};
 	int vector = attr->comp_vector;
 	u32 cq_entries = attr->cqe;
 	int ret;
 
 	if (cq_entries < 1 || cq_entries > hr_dev->caps.max_cqes) {
-		dev_err(dev, "Create CQ failed. entries=%d, max=%d\n",
-			cq_entries, hr_dev->caps.max_cqes);
+		ibdev_err(ibdev, "Failed to check CQ count %d max=%d\n",
+			  cq_entries, hr_dev->caps.max_cqes);
 		return -EINVAL;
 	}
 
 	if (vector >= hr_dev->caps.num_comp_vectors) {
-		dev_err(dev, "Create CQ failed, vector=%d, max=%d\n",
-			vector, hr_dev->caps.num_comp_vectors);
+		ibdev_err(ibdev, "Failed to check CQ vector=%d max=%d\n",
+			  vector, hr_dev->caps.num_comp_vectors);
 		return -EINVAL;
 	}
 
@@ -367,30 +253,35 @@ int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr,
 	hr_cq->ib_cq.cqe = cq_entries - 1; /* used as cqe index */
 	hr_cq->cq_depth = cq_entries;
 	hr_cq->vector = vector;
-	hr_cq->buf.size = hr_cq->cq_depth * hr_dev->caps.cq_entry_sz;
-	hr_cq->buf.page_shift = PAGE_SHIFT + hr_dev->caps.cqe_buf_pg_sz;
 	spin_lock_init(&hr_cq->lock);
 	INIT_LIST_HEAD(&hr_cq->sq_list);
 	INIT_LIST_HEAD(&hr_cq->rq_list);
 
 	if (udata) {
-		ret = create_user_cq(hr_dev, hr_cq, udata, &resp);
-		if (ret) {
-			dev_err(dev, "Create cq failed in user mode!\n");
-			goto err_cq;
-		}
-	} else {
-		ret = create_kernel_cq(hr_dev, hr_cq);
+		ret = ib_copy_from_udata(&ucmd, udata, sizeof(ucmd));
 		if (ret) {
-			dev_err(dev, "Create cq failed in kernel mode!\n");
-			goto err_cq;
+			ibdev_err(ibdev, "Failed to copy CQ udata, err %d\n",
+				  ret);
+			return ret;
 		}
 	}
 
-	ret = hns_roce_alloc_cqc(hr_dev, hr_cq);
+	ret = alloc_cq_buf(hr_dev, hr_cq, udata, ucmd.buf_addr);
+	if (ret) {
+		ibdev_err(ibdev, "Failed to alloc CQ buf, err %d\n", ret);
+		return ret;
+	}
+
+	ret = alloc_cq_db(hr_dev, hr_cq, udata, ucmd.db_addr, &resp);
 	if (ret) {
-		dev_err(dev, "Alloc CQ failed(%d).\n", ret);
-		goto err_dbmap;
+		ibdev_err(ibdev, "Failed to alloc CQ db, err %d\n", ret);
+		goto err_cq_buf;
+	}
+
+	ret = alloc_cqc(hr_dev, hr_cq);
+	if (ret) {
+		ibdev_err(ibdev, "Failed to alloc CQ context, err %d\n", ret);
+		goto err_cq_db;
 	}
 
 	/*
@@ -412,15 +303,11 @@ int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr,
 	return 0;
 
 err_cqc:
-	hns_roce_free_cqc(hr_dev, hr_cq);
-
-err_dbmap:
-	if (udata)
-		destroy_user_cq(hr_dev, hr_cq, udata, &resp);
-	else
-		destroy_kernel_cq(hr_dev, hr_cq);
-
-err_cq:
+	free_cqc(hr_dev, hr_cq);
+err_cq_db:
+	free_cq_db(hr_dev, hr_cq, udata);
+err_cq_buf:
+	free_cq_buf(hr_dev, hr_cq);
 	return ret;
 }
 
@@ -429,28 +316,12 @@ void hns_roce_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
 	struct hns_roce_dev *hr_dev = to_hr_dev(ib_cq->device);
 	struct hns_roce_cq *hr_cq = to_hr_cq(ib_cq);
 
-	if (hr_dev->hw->destroy_cq) {
+	if (hr_dev->hw->destroy_cq)
 		hr_dev->hw->destroy_cq(ib_cq, udata);
-		return;
-	}
-
-	hns_roce_free_cqc(hr_dev, hr_cq);
-	hns_roce_mtt_cleanup(hr_dev, &hr_cq->mtt);
 
-	ib_umem_release(hr_cq->umem);
-	if (udata) {
-		if (hr_cq->db_en == 1)
-			hns_roce_db_unmap_user(rdma_udata_to_drv_context(
-						       udata,
-						       struct hns_roce_ucontext,
-						       ibucontext),
-					       &hr_cq->db);
-	} else {
-		/* Free the buff of stored cq */
-		free_cq_buf(hr_dev, hr_cq);
-		if (hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_RECORD_DB)
-			hns_roce_free_db(hr_dev, &hr_cq->db);
-	}
+	free_cq_buf(hr_dev, hr_cq);
+	free_cq_db(hr_dev, hr_cq, udata);
+	free_cqc(hr_dev, hr_cq);
 }
 
 void hns_roce_cq_completion(struct hns_roce_dev *hr_dev, u32 cqn)
diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h
index f6b3cf6b95d6..ecbfeb6dbdd4 100644
--- a/drivers/infiniband/hw/hns/hns_roce_device.h
+++ b/drivers/infiniband/hw/hns/hns_roce_device.h
@@ -271,6 +271,9 @@ enum {
 
 #define PAGE_ADDR_SHIFT				12
 
+/* The minimum page count for hardware access page directly. */
+#define HNS_HW_DIRECT_PAGE_COUNT 2
+
 struct hns_roce_uar {
 	u64		pfn;
 	unsigned long	index;
@@ -357,13 +360,32 @@ struct hns_roce_hem_list {
 	struct list_head mid_bt[HNS_ROCE_MAX_BT_REGION][HNS_ROCE_MAX_BT_LEVEL];
 	struct list_head btm_bt; /* link all bottom bt in @mid_bt */
 	dma_addr_t root_ba; /* pointer to the root ba table */
-	int bt_pg_shift;
+};
+
+struct hns_roce_buf_attr {
+	struct {
+		size_t	size;  /* region size */
+		int	hopnum; /* multi-hop addressing hop num */
+	} region[HNS_ROCE_MAX_BT_REGION];
+	int region_count; /* valid region count */
+	int page_shift;  /* buffer page shift */
+	bool fixed_page; /* decide page shift is fixed-size or maximum size */
+	int user_access; /* umem access flag */
+	bool mtt_only; /* only alloc buffer-required MTT memory */
 };
 
 /* memory translate region */
 struct hns_roce_mtr {
-	struct hns_roce_hem_list hem_list;
-	int buf_pg_shift;
+	struct hns_roce_hem_list hem_list; /* multi-hop addressing resource */
+	struct ib_umem		 *umem; /* user space buffer */
+	struct hns_roce_buf	 *kmem; /* kernel space buffer */
+	struct {
+		dma_addr_t	 root_ba; /* root BA table's address */
+		bool		 is_direct; /* addressing without BA table */
+		int		 ba_pg_shift; /* BA table page shift */
+		int		 buf_pg_shift; /* buffer page shift */
+		int		 buf_pg_count;  /* buffer page count */
+	} hem_cfg; /* config for hardware addressing */
 };
 
 struct hns_roce_mw {
@@ -446,7 +468,6 @@ struct hns_roce_buf_list {
 struct hns_roce_buf {
 	struct hns_roce_buf_list	direct;
 	struct hns_roce_buf_list	*page_list;
-	int				nbufs;
 	u32				npages;
 	u32				size;
 	int				page_shift;
@@ -482,12 +503,10 @@ struct hns_roce_db {
 
 struct hns_roce_cq {
 	struct ib_cq			ib_cq;
-	struct hns_roce_buf		buf;
-	struct hns_roce_mtt		mtt;
+	struct hns_roce_mtr		mtr;
 	struct hns_roce_db		db;
 	u8				db_en;
 	spinlock_t			lock;
-	struct ib_umem			*umem;
 	u32				cq_depth;
 	u32				cons_index;
 	u32				*set_ci_db;
@@ -505,11 +524,8 @@ struct hns_roce_cq {
 };
 
 struct hns_roce_idx_que {
-	struct hns_roce_buf		idx_buf;
+	struct hns_roce_mtr		mtr;
 	int				entry_sz;
-	u32				buf_size;
-	struct ib_umem			*umem;
-	struct hns_roce_mtt		mtt;
 	unsigned long			*bitmap;
 };
 
@@ -524,10 +540,9 @@ struct hns_roce_srq {
 	atomic_t		refcount;
 	struct completion	free;
 
-	struct hns_roce_buf	buf;
+	struct hns_roce_mtr	buf_mtr;
+
 	u64		       *wrid;
-	struct ib_umem	       *umem;
-	struct hns_roce_mtt	mtt;
 	struct hns_roce_idx_que idx_que;
 	spinlock_t		lock;
 	int			head;
@@ -656,7 +671,6 @@ struct hns_roce_work {
 
 struct hns_roce_qp {
 	struct ib_qp		ibqp;
-	struct hns_roce_buf	hr_buf;
 	struct hns_roce_wq	rq;
 	struct hns_roce_db	rdb;
 	struct hns_roce_db	sdb;
@@ -666,10 +680,7 @@ struct hns_roce_qp {
 	u32			sq_signal_bits;
 	struct hns_roce_wq	sq;
 
-	struct ib_umem		*umem;
-	struct hns_roce_mtt	mtt;
 	struct hns_roce_mtr	mtr;
-	int                     wqe_bt_pg_shift;
 
 	u32			buff_size;
 	struct mutex		mutex;
@@ -769,17 +780,11 @@ struct hns_roce_eq {
 	int				over_ignore;
 	int				coalesce;
 	int				arm_st;
-	u64				eqe_ba;
-	int				eqe_ba_pg_sz;
-	int				eqe_buf_pg_sz;
 	int				hop_num;
 	struct hns_roce_mtr		mtr;
-	struct hns_roce_buf		buf;
 	int				eq_max_cnt;
 	int				eq_period;
 	int				shift;
-	dma_addr_t			cur_eqe_ba;
-	dma_addr_t			nxt_eqe_ba;
 	int				event_type;
 	int				sub_type;
 };
@@ -1102,15 +1107,39 @@ static inline struct hns_roce_qp
 	return xa_load(&hr_dev->qp_table_xa, qpn & (hr_dev->caps.num_qps - 1));
 }
 
+static inline bool hns_roce_buf_is_direct(struct hns_roce_buf *buf)
+{
+	if (buf->page_list)
+		return false;
+
+	return true;
+}
+
 static inline void *hns_roce_buf_offset(struct hns_roce_buf *buf, int offset)
 {
-	u32 page_size = 1 << buf->page_shift;
+	if (hns_roce_buf_is_direct(buf))
+		return (char *)(buf->direct.buf) + (offset & (buf->size - 1));
 
-	if (buf->nbufs == 1)
-		return (char *)(buf->direct.buf) + offset;
+	return (char *)(buf->page_list[offset >> buf->page_shift].buf) +
+	       (offset & ((1 << buf->page_shift) - 1));
+}
+
+static inline dma_addr_t hns_roce_buf_page(struct hns_roce_buf *buf, int idx)
+{
+	if (hns_roce_buf_is_direct(buf))
+		return buf->direct.map + ((dma_addr_t)idx << buf->page_shift);
 	else
-		return (char *)(buf->page_list[offset >> buf->page_shift].buf) +
-		       (offset & (page_size - 1));
+		return buf->page_list[idx].map;
+}
+
+static inline u64 to_hr_hw_page_addr(u64 addr)
+{
+	return addr >> PAGE_ADDR_SHIFT;
+}
+
+static inline u32 to_hr_hw_page_shift(u32 page_shift)
+{
+	return page_shift - PAGE_ADDR_SHIFT;
 }
 
 int hns_roce_init_uar_table(struct hns_roce_dev *dev);
@@ -1144,6 +1173,14 @@ void hns_roce_mtr_cleanup(struct hns_roce_dev *hr_dev,
 #define MTT_MIN_COUNT	 2
 int hns_roce_mtr_find(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
 		      int offset, u64 *mtt_buf, int mtt_max, u64 *base_addr);
+int hns_roce_mtr_create(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
+			struct hns_roce_buf_attr *buf_attr, int page_shift,
+			struct ib_udata *udata, unsigned long user_addr);
+void hns_roce_mtr_destroy(struct hns_roce_dev *hr_dev,
+			  struct hns_roce_mtr *mtr);
+int hns_roce_mtr_map(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
+		     struct hns_roce_buf_region *regions, int region_cnt,
+		     dma_addr_t *pages, int page_cnt);
 
 int hns_roce_init_pd_table(struct hns_roce_dev *hr_dev);
 int hns_roce_init_mr_table(struct hns_roce_dev *hr_dev);
@@ -1200,8 +1237,7 @@ struct ib_mw *hns_roce_alloc_mw(struct ib_pd *pd, enum ib_mw_type,
 				struct ib_udata *udata);
 int hns_roce_dealloc_mw(struct ib_mw *ibmw);
 
-void hns_roce_buf_free(struct hns_roce_dev *hr_dev, u32 size,
-		       struct hns_roce_buf *buf);
+void hns_roce_buf_free(struct hns_roce_dev *hr_dev, struct hns_roce_buf *buf);
 int hns_roce_buf_alloc(struct hns_roce_dev *hr_dev, u32 size, u32 max_direct,
 		       struct hns_roce_buf *buf, u32 page_shift);
 
@@ -1254,8 +1290,6 @@ int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr,
 		       struct ib_udata *udata);
 
 void hns_roce_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata);
-void hns_roce_free_cqc(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq);
-
 int hns_roce_db_map_user(struct hns_roce_ucontext *context,
 			 struct ib_udata *udata, unsigned long virt,
 			 struct hns_roce_db *db);
diff --git a/drivers/infiniband/hw/hns/hns_roce_hem.c b/drivers/infiniband/hw/hns/hns_roce_hem.c
index 263338b90d7a..a245e753afe9 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hem.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hem.c
@@ -1505,7 +1505,7 @@ static int hem_list_alloc_root_bt(struct hns_roce_dev *hr_dev,
 int hns_roce_hem_list_request(struct hns_roce_dev *hr_dev,
 			      struct hns_roce_hem_list *hem_list,
 			      const struct hns_roce_buf_region *regions,
-			      int region_cnt)
+			      int region_cnt, int bt_pg_shift)
 {
 	const struct hns_roce_buf_region *r;
 	int ofs, end;
@@ -1519,7 +1519,7 @@ int hns_roce_hem_list_request(struct hns_roce_dev *hr_dev,
 		return -EINVAL;
 	}
 
-	unit = (1 << hem_list->bt_pg_shift) / BA_BYTE_LEN;
+	unit = (1 << bt_pg_shift) / BA_BYTE_LEN;
 	for (i = 0; i < region_cnt; i++) {
 		r = &regions[i];
 		if (!r->count)
@@ -1566,8 +1566,7 @@ void hns_roce_hem_list_release(struct hns_roce_dev *hr_dev,
 	hem_list->root_ba = 0;
 }
 
-void hns_roce_hem_list_init(struct hns_roce_hem_list *hem_list,
-			    int bt_page_order)
+void hns_roce_hem_list_init(struct hns_roce_hem_list *hem_list)
 {
 	int i, j;
 
@@ -1576,8 +1575,6 @@ void hns_roce_hem_list_init(struct hns_roce_hem_list *hem_list,
 	for (i = 0; i < HNS_ROCE_MAX_BT_REGION; i++)
 		for (j = 0; j < HNS_ROCE_MAX_BT_LEVEL; j++)
 			INIT_LIST_HEAD(&hem_list->mid_bt[i][j]);
-
-	hem_list->bt_pg_shift = bt_page_order;
 }
 
 void *hns_roce_hem_list_find_mtt(struct hns_roce_dev *hr_dev,
diff --git a/drivers/infiniband/hw/hns/hns_roce_hem.h b/drivers/infiniband/hw/hns/hns_roce_hem.h
index 3bb8f78fb7b0..a00b6c27735a 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hem.h
+++ b/drivers/infiniband/hw/hns/hns_roce_hem.h
@@ -133,14 +133,13 @@ int hns_roce_calc_hem_mhop(struct hns_roce_dev *hr_dev,
 			   struct hns_roce_hem_mhop *mhop);
 bool hns_roce_check_whether_mhop(struct hns_roce_dev *hr_dev, u32 type);
 
-void hns_roce_hem_list_init(struct hns_roce_hem_list *hem_list,
-			    int bt_page_order);
+void hns_roce_hem_list_init(struct hns_roce_hem_list *hem_list);
 int hns_roce_hem_list_calc_root_ba(const struct hns_roce_buf_region *regions,
 				   int region_cnt, int unit);
 int hns_roce_hem_list_request(struct hns_roce_dev *hr_dev,
 			      struct hns_roce_hem_list *hem_list,
 			      const struct hns_roce_buf_region *regions,
-			      int region_cnt);
+			      int region_cnt, int bt_pg_shift);
 void hns_roce_hem_list_release(struct hns_roce_dev *hr_dev,
 			       struct hns_roce_hem_list *hem_list);
 void *hns_roce_hem_list_find_mtt(struct hns_roce_dev *hr_dev,
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
index 5ff028d77be3..49775cda83dc 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
@@ -1972,7 +1972,8 @@ static int hns_roce_v1_write_mtpt(void *mb_buf, struct hns_roce_mr *mr,
 
 static void *get_cqe(struct hns_roce_cq *hr_cq, int n)
 {
-	return hns_roce_buf_offset(&hr_cq->buf, n * HNS_ROCE_V1_CQE_ENTRY_SIZE);
+	return hns_roce_buf_offset(hr_cq->mtr.kmem,
+				   n * HNS_ROCE_V1_CQE_ENTRY_SIZE);
 }
 
 static void *get_sw_cqe(struct hns_roce_cq *hr_cq, int n)
@@ -2479,7 +2480,6 @@ static int hns_roce_v1_clear_hem(struct hns_roce_dev *hr_dev,
 }
 
 static int hns_roce_v1_qp_modify(struct hns_roce_dev *hr_dev,
-				 struct hns_roce_mtt *mtt,
 				 enum hns_roce_qp_state cur_state,
 				 enum hns_roce_qp_state new_state,
 				 struct hns_roce_qp_context *context,
@@ -2560,6 +2560,29 @@ static int hns_roce_v1_qp_modify(struct hns_roce_dev *hr_dev,
 	return ret;
 }
 
+static int find_wqe_mtt(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp,
+			u64 *sq_ba, u64 *rq_ba, dma_addr_t *bt_ba)
+{
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	int rq_pa_start;
+	int count;
+
+	count = hns_roce_mtr_find(hr_dev, &hr_qp->mtr, 0, sq_ba, 1, bt_ba);
+	if (count < 1) {
+		ibdev_err(ibdev, "Failed to find SQ ba\n");
+		return -ENOBUFS;
+	}
+	rq_pa_start = hr_qp->rq.offset >> hr_qp->mtr.hem_cfg.buf_pg_shift;
+	count = hns_roce_mtr_find(hr_dev, &hr_qp->mtr, rq_pa_start, rq_ba, 1,
+				  NULL);
+	if (!count) {
+		ibdev_err(ibdev, "Failed to find RQ ba\n");
+		return -ENOBUFS;
+	}
+
+	return 0;
+}
+
 static int hns_roce_v1_m_sqp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 			     int attr_mask, enum ib_qp_state cur_state,
 			     enum ib_qp_state new_state)
@@ -2567,25 +2590,20 @@ static int hns_roce_v1_m_sqp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 	struct hns_roce_dev *hr_dev = to_hr_dev(ibqp->device);
 	struct hns_roce_qp *hr_qp = to_hr_qp(ibqp);
 	struct hns_roce_sqp_context *context;
-	struct device *dev = &hr_dev->pdev->dev;
 	dma_addr_t dma_handle = 0;
 	u32 __iomem *addr;
-	int rq_pa_start;
+	u64 sq_ba = 0;
+	u64 rq_ba = 0;
 	__le32 tmp;
 	u32 reg_val;
-	u64 *mtts;
 
 	context = kzalloc(sizeof(*context), GFP_KERNEL);
 	if (!context)
 		return -ENOMEM;
 
 	/* Search QP buf's MTTs */
-	mtts = hns_roce_table_find(hr_dev, &hr_dev->mr_table.mtt_table,
-				   hr_qp->mtt.first_seg, &dma_handle);
-	if (!mtts) {
-		dev_err(dev, "qp buf pa find failed\n");
+	if (find_wqe_mtt(hr_dev, hr_qp, &sq_ba, &rq_ba, &dma_handle))
 		goto out;
-	}
 
 	if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) {
 		roce_set_field(context->qp1c_bytes_4,
@@ -2599,11 +2617,11 @@ static int hns_roce_v1_m_sqp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 		roce_set_field(context->qp1c_bytes_4, QP1C_BYTES_4_PD_M,
 			       QP1C_BYTES_4_PD_S, to_hr_pd(ibqp->pd)->pdn);
 
-		context->sq_rq_bt_l = cpu_to_le32((u32)(dma_handle));
+		context->sq_rq_bt_l = cpu_to_le32(dma_handle);
 		roce_set_field(context->qp1c_bytes_12,
 			       QP1C_BYTES_12_SQ_RQ_BT_H_M,
 			       QP1C_BYTES_12_SQ_RQ_BT_H_S,
-			       ((u32)(dma_handle >> 32)));
+			       upper_32_bits(dma_handle));
 
 		roce_set_field(context->qp1c_bytes_16, QP1C_BYTES_16_RQ_HEAD_M,
 			       QP1C_BYTES_16_RQ_HEAD_S, hr_qp->rq.head);
@@ -2624,14 +2642,12 @@ static int hns_roce_v1_m_sqp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 		roce_set_field(context->qp1c_bytes_20, QP1C_BYTES_20_PKEY_IDX_M,
 			       QP1C_BYTES_20_PKEY_IDX_S, attr->pkey_index);
 
-		rq_pa_start = (u32)hr_qp->rq.offset / PAGE_SIZE;
-		context->cur_rq_wqe_ba_l =
-				cpu_to_le32((u32)(mtts[rq_pa_start]));
+		context->cur_rq_wqe_ba_l = cpu_to_le32(rq_ba);
 
 		roce_set_field(context->qp1c_bytes_28,
 			       QP1C_BYTES_28_CUR_RQ_WQE_BA_H_M,
 			       QP1C_BYTES_28_CUR_RQ_WQE_BA_H_S,
-			       (mtts[rq_pa_start]) >> 32);
+			       upper_32_bits(rq_ba));
 		roce_set_field(context->qp1c_bytes_28,
 			       QP1C_BYTES_28_RQ_CUR_IDX_M,
 			       QP1C_BYTES_28_RQ_CUR_IDX_S, 0);
@@ -2645,12 +2661,12 @@ static int hns_roce_v1_m_sqp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 			       QP1C_BYTES_32_TX_CQ_NUM_S,
 			       to_hr_cq(ibqp->send_cq)->cqn);
 
-		context->cur_sq_wqe_ba_l  = cpu_to_le32((u32)mtts[0]);
+		context->cur_sq_wqe_ba_l = cpu_to_le32(sq_ba);
 
 		roce_set_field(context->qp1c_bytes_40,
 			       QP1C_BYTES_40_CUR_SQ_WQE_BA_H_M,
 			       QP1C_BYTES_40_CUR_SQ_WQE_BA_H_S,
-			       (mtts[0]) >> 32);
+			       upper_32_bits(sq_ba));
 		roce_set_field(context->qp1c_bytes_40,
 			       QP1C_BYTES_40_SQ_CUR_IDX_M,
 			       QP1C_BYTES_40_SQ_CUR_IDX_S, 0);
@@ -2704,6 +2720,28 @@ static int hns_roce_v1_m_sqp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 	return -EINVAL;
 }
 
+static bool check_qp_state(enum ib_qp_state cur_state,
+			   enum ib_qp_state new_state)
+{
+	static const bool sm[][IB_QPS_ERR + 1] = {
+		[IB_QPS_RESET] = { [IB_QPS_RESET] = true,
+				   [IB_QPS_INIT] = true },
+		[IB_QPS_INIT] = { [IB_QPS_RESET] = true,
+				  [IB_QPS_INIT] = true,
+				  [IB_QPS_RTR] = true,
+				  [IB_QPS_ERR] = true },
+		[IB_QPS_RTR] = { [IB_QPS_RESET] = true,
+				 [IB_QPS_RTS] = true,
+				 [IB_QPS_ERR] = true },
+		[IB_QPS_RTS] = { [IB_QPS_RESET] = true, [IB_QPS_ERR] = true },
+		[IB_QPS_SQD] = {},
+		[IB_QPS_SQE] = {},
+		[IB_QPS_ERR] = { [IB_QPS_RESET] = true, [IB_QPS_ERR] = true }
+	};
+
+	return sm[cur_state][new_state];
+}
+
 static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 			    int attr_mask, enum ib_qp_state cur_state,
 			    enum ib_qp_state new_state)
@@ -2716,26 +2754,29 @@ static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 	dma_addr_t dma_handle_2 = 0;
 	dma_addr_t dma_handle = 0;
 	__le32 doorbell[2] = {0};
-	int rq_pa_start = 0;
 	u64 *mtts_2 = NULL;
 	int ret = -EINVAL;
-	u64 *mtts = NULL;
+	u64 sq_ba = 0;
+	u64 rq_ba = 0;
 	int port;
 	u8 port_num;
 	u8 *dmac;
 	u8 *smac;
 
+	if (!check_qp_state(cur_state, new_state)) {
+		ibdev_err(ibqp->device,
+			  "not support QP(%u) status from %d to %d\n",
+			  ibqp->qp_num, cur_state, new_state);
+		return -EINVAL;
+	}
+
 	context = kzalloc(sizeof(*context), GFP_KERNEL);
 	if (!context)
 		return -ENOMEM;
 
 	/* Search qp buf's mtts */
-	mtts = hns_roce_table_find(hr_dev, &hr_dev->mr_table.mtt_table,
-				   hr_qp->mtt.first_seg, &dma_handle);
-	if (mtts == NULL) {
-		dev_err(dev, "qp buf pa find failed\n");
+	if (find_wqe_mtt(hr_dev, hr_qp, &sq_ba, &rq_ba, &dma_handle))
 		goto out;
-	}
 
 	/* Search IRRL's mtts */
 	mtts_2 = hns_roce_table_find(hr_dev, &hr_dev->qp_table.irrl_table,
@@ -2890,11 +2931,11 @@ static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 
 		dmac = (u8 *)attr->ah_attr.roce.dmac;
 
-		context->sq_rq_bt_l = cpu_to_le32((u32)(dma_handle));
+		context->sq_rq_bt_l = cpu_to_le32(dma_handle);
 		roce_set_field(context->qpc_bytes_24,
 			       QP_CONTEXT_QPC_BYTES_24_SQ_RQ_BT_H_M,
 			       QP_CONTEXT_QPC_BYTES_24_SQ_RQ_BT_H_S,
-			       ((u32)(dma_handle >> 32)));
+			       upper_32_bits(dma_handle));
 		roce_set_bit(context->qpc_bytes_24,
 			     QP_CONTEXT_QPC_BYTE_24_REMOTE_ENABLE_E2E_CREDITS_S,
 			     1);
@@ -2993,14 +3034,12 @@ static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 			       QP_CONTEXT_QPC_BYTES_68_RQ_CUR_INDEX_M,
 			       QP_CONTEXT_QPC_BYTES_68_RQ_CUR_INDEX_S, 0);
 
-		rq_pa_start = (u32)hr_qp->rq.offset / PAGE_SIZE;
-		context->cur_rq_wqe_ba_l =
-				cpu_to_le32((u32)(mtts[rq_pa_start]));
+		context->cur_rq_wqe_ba_l = cpu_to_le32(rq_ba);
 
 		roce_set_field(context->qpc_bytes_76,
 			QP_CONTEXT_QPC_BYTES_76_CUR_RQ_WQE_BA_H_M,
 			QP_CONTEXT_QPC_BYTES_76_CUR_RQ_WQE_BA_H_S,
-			mtts[rq_pa_start] >> 32);
+			upper_32_bits(rq_ba));
 		roce_set_field(context->qpc_bytes_76,
 			       QP_CONTEXT_QPC_BYTES_76_RX_REQ_MSN_M,
 			       QP_CONTEXT_QPC_BYTES_76_RX_REQ_MSN_S, 0);
@@ -3062,8 +3101,7 @@ static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 			       QP_CONTEXT_QPC_BYTES_156_SL_S,
 			       rdma_ah_get_sl(&attr->ah_attr));
 		hr_qp->sl = rdma_ah_get_sl(&attr->ah_attr);
-	} else if (cur_state == IB_QPS_RTR &&
-		new_state == IB_QPS_RTS) {
+	} else if (cur_state == IB_QPS_RTR && new_state == IB_QPS_RTS) {
 		/* If exist optional param, return error */
 		if ((attr_mask & IB_QP_ALT_PATH) ||
 		    (attr_mask & IB_QP_ACCESS_FLAGS) ||
@@ -3075,12 +3113,12 @@ static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 			goto out;
 		}
 
-		context->rx_cur_sq_wqe_ba_l = cpu_to_le32((u32)(mtts[0]));
+		context->rx_cur_sq_wqe_ba_l = cpu_to_le32(sq_ba);
 
 		roce_set_field(context->qpc_bytes_120,
 			       QP_CONTEXT_QPC_BYTES_120_RX_CUR_SQ_WQE_BA_H_M,
 			       QP_CONTEXT_QPC_BYTES_120_RX_CUR_SQ_WQE_BA_H_S,
-			       (mtts[0]) >> 32);
+			       upper_32_bits(sq_ba));
 
 		roce_set_field(context->qpc_bytes_124,
 			       QP_CONTEXT_QPC_BYTES_124_RX_ACK_MSN_M,
@@ -3223,28 +3261,18 @@ static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 			       QP_CONTEXT_QPC_BYTES_180_SQ_HEAD_M,
 			       QP_CONTEXT_QPC_BYTES_180_SQ_HEAD_S, 0);
 
-		context->tx_cur_sq_wqe_ba_l = cpu_to_le32((u32)(mtts[0]));
+		context->tx_cur_sq_wqe_ba_l = cpu_to_le32(sq_ba);
 
 		roce_set_field(context->qpc_bytes_188,
 			       QP_CONTEXT_QPC_BYTES_188_TX_CUR_SQ_WQE_BA_H_M,
 			       QP_CONTEXT_QPC_BYTES_188_TX_CUR_SQ_WQE_BA_H_S,
-			       (mtts[0]) >> 32);
+			       upper_32_bits(sq_ba));
 		roce_set_bit(context->qpc_bytes_188,
 			     QP_CONTEXT_QPC_BYTES_188_PKT_RETRY_FLG_S, 0);
 		roce_set_field(context->qpc_bytes_188,
 			       QP_CONTEXT_QPC_BYTES_188_TX_RETRY_CUR_INDEX_M,
 			       QP_CONTEXT_QPC_BYTES_188_TX_RETRY_CUR_INDEX_S,
 			       0);
-	} else if (!((cur_state == IB_QPS_INIT && new_state == IB_QPS_RESET) ||
-		   (cur_state == IB_QPS_INIT && new_state == IB_QPS_ERR) ||
-		   (cur_state == IB_QPS_RTR && new_state == IB_QPS_RESET) ||
-		   (cur_state == IB_QPS_RTR && new_state == IB_QPS_ERR) ||
-		   (cur_state == IB_QPS_RTS && new_state == IB_QPS_RESET) ||
-		   (cur_state == IB_QPS_RTS && new_state == IB_QPS_ERR) ||
-		   (cur_state == IB_QPS_ERR && new_state == IB_QPS_RESET) ||
-		   (cur_state == IB_QPS_ERR && new_state == IB_QPS_ERR))) {
-		dev_err(dev, "not support this status migration\n");
-		goto out;
 	}
 
 	/* Every status migrate must change state */
@@ -3253,8 +3281,7 @@ static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 		       QP_CONTEXT_QPC_BYTES_144_QP_STATE_S, new_state);
 
 	/* SW pass context to HW */
-	ret = hns_roce_v1_qp_modify(hr_dev, &hr_qp->mtt,
-				    to_hns_roce_state(cur_state),
+	ret = hns_roce_v1_qp_modify(hr_dev, to_hns_roce_state(cur_state),
 				    to_hns_roce_state(new_state), context,
 				    hr_qp);
 	if (ret) {
@@ -3636,8 +3663,6 @@ static void hns_roce_v1_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
 	u32 cqe_cnt_cur;
 	int wait_time = 0;
 
-	hns_roce_free_cqc(hr_dev, hr_cq);
-
 	/*
 	 * Before freeing cq buffer, we need to ensure that the outstanding CQE
 	 * have been written by checking the CQE counter.
@@ -3660,14 +3685,6 @@ static void hns_roce_v1_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
 		}
 		wait_time++;
 	}
-
-	hns_roce_mtt_cleanup(hr_dev, &hr_cq->mtt);
-
-	ib_umem_release(hr_cq->umem);
-	if (!udata) {
-		/* Free the buff of stored cq */
-		hns_roce_buf_free(hr_dev, hr_cq->buf.size, &hr_cq->buf);
-	}
 }
 
 static void set_eq_cons_index_v1(struct hns_roce_eq *eq, int req_not)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index c3316672b70e..2a8c3893bccd 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -164,7 +164,7 @@ static void set_extend_sge(struct hns_roce_qp *qp, const struct ib_send_wr *wr,
 		num_in_wqe = HNS_ROCE_V2_UC_RC_SGE_NUM_IN_WQE;
 	extend_sge_num = valid_num_sge - num_in_wqe;
 	sg = wr->sg_list + num_in_wqe;
-	shift = qp->hr_buf.page_shift;
+	shift = qp->mtr.hem_cfg.buf_pg_shift;
 
 	/*
 	 * Check whether wr->num_sge sges are in the same page. If not, we
@@ -2040,8 +2040,6 @@ static int hns_roce_config_link_table(struct hns_roce_dev *hr_dev,
 
 	page_num = link_tbl->npages;
 	entry = link_tbl->table.buf;
-	memset(req_a, 0, sizeof(*req_a));
-	memset(req_b, 0, sizeof(*req_b));
 
 	for (i = 0; i < 2; i++) {
 		hns_roce_cmq_setup_basic_desc(&desc[i], opcode, false);
@@ -2050,39 +2048,30 @@ static int hns_roce_config_link_table(struct hns_roce_dev *hr_dev,
 			desc[i].flag |= cpu_to_le16(HNS_ROCE_CMD_FLAG_NEXT);
 		else
 			desc[i].flag &= ~cpu_to_le16(HNS_ROCE_CMD_FLAG_NEXT);
-
-		if (i == 0) {
-			req_a->base_addr_l =
-				cpu_to_le32(link_tbl->table.map & 0xffffffff);
-			req_a->base_addr_h =
-				cpu_to_le32(link_tbl->table.map >> 32);
-			roce_set_field(req_a->depth_pgsz_init_en,
-				       CFG_LLM_QUE_DEPTH_M, CFG_LLM_QUE_DEPTH_S,
-				       link_tbl->npages);
-			roce_set_field(req_a->depth_pgsz_init_en,
-				       CFG_LLM_QUE_PGSZ_M, CFG_LLM_QUE_PGSZ_S,
-				       link_tbl->pg_sz);
-			req_a->head_ba_l = cpu_to_le32(entry[0].blk_ba0);
-			req_a->head_ba_h_nxtptr =
-				cpu_to_le32(entry[0].blk_ba1_nxt_ptr);
-			roce_set_field(req_a->head_ptr, CFG_LLM_HEAD_PTR_M,
-				       CFG_LLM_HEAD_PTR_S, 0);
-		} else {
-			req_b->tail_ba_l =
-				cpu_to_le32(entry[page_num - 1].blk_ba0);
-			roce_set_field(req_b->tail_ba_h, CFG_LLM_TAIL_BA_H_M,
-				       CFG_LLM_TAIL_BA_H_S,
-				       entry[page_num - 1].blk_ba1_nxt_ptr &
-					       HNS_ROCE_LINK_TABLE_BA1_M);
-			roce_set_field(req_b->tail_ptr, CFG_LLM_TAIL_PTR_M,
-				       CFG_LLM_TAIL_PTR_S,
-				       (entry[page_num - 2].blk_ba1_nxt_ptr &
-					HNS_ROCE_LINK_TABLE_NXT_PTR_M) >>
-					       HNS_ROCE_LINK_TABLE_NXT_PTR_S);
-		}
 	}
+
+	req_a->base_addr_l = cpu_to_le32(link_tbl->table.map & 0xffffffff);
+	req_a->base_addr_h = cpu_to_le32(link_tbl->table.map >> 32);
+	roce_set_field(req_a->depth_pgsz_init_en, CFG_LLM_QUE_DEPTH_M,
+		       CFG_LLM_QUE_DEPTH_S, link_tbl->npages);
+	roce_set_field(req_a->depth_pgsz_init_en, CFG_LLM_QUE_PGSZ_M,
+		       CFG_LLM_QUE_PGSZ_S, link_tbl->pg_sz);
 	roce_set_field(req_a->depth_pgsz_init_en, CFG_LLM_INIT_EN_M,
 		       CFG_LLM_INIT_EN_S, 1);
+	req_a->head_ba_l = cpu_to_le32(entry[0].blk_ba0);
+	req_a->head_ba_h_nxtptr = cpu_to_le32(entry[0].blk_ba1_nxt_ptr);
+	roce_set_field(req_a->head_ptr, CFG_LLM_HEAD_PTR_M, CFG_LLM_HEAD_PTR_S,
+		       0);
+
+	req_b->tail_ba_l = cpu_to_le32(entry[page_num - 1].blk_ba0);
+	roce_set_field(req_b->tail_ba_h, CFG_LLM_TAIL_BA_H_M,
+		       CFG_LLM_TAIL_BA_H_S,
+		       entry[page_num - 1].blk_ba1_nxt_ptr &
+		       HNS_ROCE_LINK_TABLE_BA1_M);
+	roce_set_field(req_b->tail_ptr, CFG_LLM_TAIL_PTR_M, CFG_LLM_TAIL_PTR_S,
+		       (entry[page_num - 2].blk_ba1_nxt_ptr &
+			HNS_ROCE_LINK_TABLE_NXT_PTR_M) >>
+			HNS_ROCE_LINK_TABLE_NXT_PTR_S);
 
 	return hns_roce_cmq_send(hr_dev, desc, 2);
 }
@@ -2438,12 +2427,9 @@ static int hns_roce_v2_set_mac(struct hns_roce_dev *hr_dev, u8 phy_port,
 	reg_smac_l = *(u32 *)(&addr[0]);
 	reg_smac_h = *(u16 *)(&addr[4]);
 
-	memset(smac_tb, 0, sizeof(*smac_tb));
-	roce_set_field(smac_tb->tb_idx_rsv,
-		       CFG_SMAC_TB_IDX_M,
+	roce_set_field(smac_tb->tb_idx_rsv, CFG_SMAC_TB_IDX_M,
 		       CFG_SMAC_TB_IDX_S, phy_port);
-	roce_set_field(smac_tb->vf_smac_h_rsv,
-		       CFG_SMAC_TB_VF_SMAC_H_M,
+	roce_set_field(smac_tb->vf_smac_h_rsv, CFG_SMAC_TB_VF_SMAC_H_M,
 		       CFG_SMAC_TB_VF_SMAC_H_S, reg_smac_h);
 	smac_tb->vf_smac_l = cpu_to_le32(reg_smac_l);
 
@@ -2680,7 +2666,8 @@ static int hns_roce_v2_mw_write_mtpt(void *mb_buf, struct hns_roce_mw *mw)
 
 static void *get_cqe_v2(struct hns_roce_cq *hr_cq, int n)
 {
-	return hns_roce_buf_offset(&hr_cq->buf, n * HNS_ROCE_V2_CQE_ENTRY_SIZE);
+	return hns_roce_buf_offset(hr_cq->mtr.kmem,
+				   n * HNS_ROCE_V2_CQE_ENTRY_SIZE);
 }
 
 static void *get_sw_cqe_v2(struct hns_roce_cq *hr_cq, int n)
@@ -2699,7 +2686,7 @@ static struct hns_roce_v2_cqe *next_cqe_sw_v2(struct hns_roce_cq *hr_cq)
 
 static void *get_srq_wqe(struct hns_roce_srq *srq, int n)
 {
-	return hns_roce_buf_offset(&srq->buf, n << srq->wqe_shift);
+	return hns_roce_buf_offset(srq->buf_mtr.kmem, n << srq->wqe_shift);
 }
 
 static void hns_roce_free_srq_wqe(struct hns_roce_srq *srq, int wqe_index)
@@ -2801,30 +2788,30 @@ static void hns_roce_v2_write_cqc(struct hns_roce_dev *hr_dev,
 	roce_set_field(cq_context->byte_8_cqn, V2_CQC_BYTE_8_CQN_M,
 		       V2_CQC_BYTE_8_CQN_S, hr_cq->cqn);
 
-	cq_context->cqe_cur_blk_addr = cpu_to_le32(mtts[0] >> PAGE_ADDR_SHIFT);
+	cq_context->cqe_cur_blk_addr = cpu_to_le32(to_hr_hw_page_addr(mtts[0]));
 
 	roce_set_field(cq_context->byte_16_hop_addr,
 		       V2_CQC_BYTE_16_CQE_CUR_BLK_ADDR_M,
 		       V2_CQC_BYTE_16_CQE_CUR_BLK_ADDR_S,
-		       mtts[0] >> (32 + PAGE_ADDR_SHIFT));
+		       upper_32_bits(to_hr_hw_page_addr(mtts[0])));
 	roce_set_field(cq_context->byte_16_hop_addr,
 		       V2_CQC_BYTE_16_CQE_HOP_NUM_M,
 		       V2_CQC_BYTE_16_CQE_HOP_NUM_S, hr_dev->caps.cqe_hop_num ==
 		       HNS_ROCE_HOP_NUM_0 ? 0 : hr_dev->caps.cqe_hop_num);
 
-	cq_context->cqe_nxt_blk_addr = cpu_to_le32(mtts[1] >> PAGE_ADDR_SHIFT);
+	cq_context->cqe_nxt_blk_addr = cpu_to_le32(to_hr_hw_page_addr(mtts[1]));
 	roce_set_field(cq_context->byte_24_pgsz_addr,
 		       V2_CQC_BYTE_24_CQE_NXT_BLK_ADDR_M,
 		       V2_CQC_BYTE_24_CQE_NXT_BLK_ADDR_S,
-		       mtts[1] >> (32 + PAGE_ADDR_SHIFT));
+		       upper_32_bits(to_hr_hw_page_addr(mtts[1])));
 	roce_set_field(cq_context->byte_24_pgsz_addr,
 		       V2_CQC_BYTE_24_CQE_BA_PG_SZ_M,
 		       V2_CQC_BYTE_24_CQE_BA_PG_SZ_S,
-		       hr_dev->caps.cqe_ba_pg_sz + PG_SHIFT_OFFSET);
+		       to_hr_hw_page_shift(hr_cq->mtr.hem_cfg.ba_pg_shift));
 	roce_set_field(cq_context->byte_24_pgsz_addr,
 		       V2_CQC_BYTE_24_CQE_BUF_PG_SZ_M,
 		       V2_CQC_BYTE_24_CQE_BUF_PG_SZ_S,
-		       hr_dev->caps.cqe_buf_pg_sz + PG_SHIFT_OFFSET);
+		       to_hr_hw_page_shift(hr_cq->mtr.hem_cfg.buf_pg_shift));
 
 	cq_context->cqe_ba = cpu_to_le32(dma_handle >> 3);
 
@@ -2968,6 +2955,61 @@ static int hns_roce_v2_sw_poll_cq(struct hns_roce_cq *hr_cq, int num_entries,
 	return npolled;
 }
 
+static void get_cqe_status(struct hns_roce_dev *hr_dev, struct hns_roce_qp *qp,
+			   struct hns_roce_v2_cqe *cqe, struct ib_wc *wc)
+{
+	static const struct {
+		u32 cqe_status;
+		enum ib_wc_status wc_status;
+	} map[] = {
+		{ HNS_ROCE_CQE_V2_SUCCESS, IB_WC_SUCCESS },
+		{ HNS_ROCE_CQE_V2_LOCAL_LENGTH_ERR, IB_WC_LOC_LEN_ERR },
+		{ HNS_ROCE_CQE_V2_LOCAL_QP_OP_ERR, IB_WC_LOC_QP_OP_ERR },
+		{ HNS_ROCE_CQE_V2_LOCAL_PROT_ERR, IB_WC_LOC_PROT_ERR },
+		{ HNS_ROCE_CQE_V2_WR_FLUSH_ERR, IB_WC_WR_FLUSH_ERR },
+		{ HNS_ROCE_CQE_V2_MW_BIND_ERR, IB_WC_MW_BIND_ERR },
+		{ HNS_ROCE_CQE_V2_BAD_RESP_ERR, IB_WC_BAD_RESP_ERR },
+		{ HNS_ROCE_CQE_V2_LOCAL_ACCESS_ERR, IB_WC_LOC_ACCESS_ERR },
+		{ HNS_ROCE_CQE_V2_REMOTE_INVAL_REQ_ERR, IB_WC_REM_INV_REQ_ERR },
+		{ HNS_ROCE_CQE_V2_REMOTE_ACCESS_ERR, IB_WC_REM_ACCESS_ERR },
+		{ HNS_ROCE_CQE_V2_REMOTE_OP_ERR, IB_WC_REM_OP_ERR },
+		{ HNS_ROCE_CQE_V2_TRANSPORT_RETRY_EXC_ERR,
+		  IB_WC_RETRY_EXC_ERR },
+		{ HNS_ROCE_CQE_V2_RNR_RETRY_EXC_ERR, IB_WC_RNR_RETRY_EXC_ERR },
+		{ HNS_ROCE_CQE_V2_REMOTE_ABORT_ERR, IB_WC_REM_ABORT_ERR },
+	};
+
+	u32 cqe_status = roce_get_field(cqe->byte_4, V2_CQE_BYTE_4_STATUS_M,
+					V2_CQE_BYTE_4_STATUS_S);
+	int i;
+
+	wc->status = IB_WC_GENERAL_ERR;
+	for (i = 0; i < ARRAY_SIZE(map); i++)
+		if (cqe_status == map[i].cqe_status) {
+			wc->status = map[i].wc_status;
+			break;
+		}
+
+	if (wc->status == IB_WC_SUCCESS || wc->status == IB_WC_WR_FLUSH_ERR)
+		return;
+
+	ibdev_err(&hr_dev->ib_dev, "error cqe status 0x%x:\n", cqe_status);
+	print_hex_dump(KERN_ERR, "", DUMP_PREFIX_NONE, 16, 4, cqe,
+		       sizeof(*cqe), false);
+
+	/*
+	 * Hip08 hardware cannot flush the WQEs in SQ/RQ if the QP state gets
+	 * into errored mode. Hence, as a workaround to this hardware
+	 * limitation, driver needs to assist in flushing. But the flushing
+	 * operation uses mailbox to convey the QP state to the hardware and
+	 * which can sleep due to the mutex protection around the mailbox calls.
+	 * Hence, use the deferred flush for now. Once wc error detected, the
+	 * flushing operation is needed.
+	 */
+	if (!test_and_set_bit(HNS_ROCE_FLUSH_FLAG, &qp->flush_flag))
+		init_flush_work(hr_dev, qp);
+}
+
 static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
 				struct hns_roce_qp **cur_qp, struct ib_wc *wc)
 {
@@ -2979,7 +3021,6 @@ static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
 	int is_send;
 	u16 wqe_ctr;
 	u32 opcode;
-	u32 status;
 	int qpn;
 	int ret;
 
@@ -3009,7 +3050,6 @@ static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
 		*cur_qp = hr_qp;
 	}
 
-	hr_qp = *cur_qp;
 	wc->qp = &(*cur_qp)->ibqp;
 	wc->vendor_err = 0;
 
@@ -3044,77 +3084,8 @@ static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
 		++wq->tail;
 	}
 
-	status = roce_get_field(cqe->byte_4, V2_CQE_BYTE_4_STATUS_M,
-				V2_CQE_BYTE_4_STATUS_S);
-	switch (status & HNS_ROCE_V2_CQE_STATUS_MASK) {
-	case HNS_ROCE_CQE_V2_SUCCESS:
-		wc->status = IB_WC_SUCCESS;
-		break;
-	case HNS_ROCE_CQE_V2_LOCAL_LENGTH_ERR:
-		wc->status = IB_WC_LOC_LEN_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_LOCAL_QP_OP_ERR:
-		wc->status = IB_WC_LOC_QP_OP_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_LOCAL_PROT_ERR:
-		wc->status = IB_WC_LOC_PROT_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_WR_FLUSH_ERR:
-		wc->status = IB_WC_WR_FLUSH_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_MW_BIND_ERR:
-		wc->status = IB_WC_MW_BIND_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_BAD_RESP_ERR:
-		wc->status = IB_WC_BAD_RESP_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_LOCAL_ACCESS_ERR:
-		wc->status = IB_WC_LOC_ACCESS_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_REMOTE_INVAL_REQ_ERR:
-		wc->status = IB_WC_REM_INV_REQ_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_REMOTE_ACCESS_ERR:
-		wc->status = IB_WC_REM_ACCESS_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_REMOTE_OP_ERR:
-		wc->status = IB_WC_REM_OP_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_TRANSPORT_RETRY_EXC_ERR:
-		wc->status = IB_WC_RETRY_EXC_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_RNR_RETRY_EXC_ERR:
-		wc->status = IB_WC_RNR_RETRY_EXC_ERR;
-		break;
-	case HNS_ROCE_CQE_V2_REMOTE_ABORT_ERR:
-		wc->status = IB_WC_REM_ABORT_ERR;
-		break;
-	default:
-		wc->status = IB_WC_GENERAL_ERR;
-		break;
-	}
-
-	/*
-	 * Hip08 hardware cannot flush the WQEs in SQ/RQ if the QP state gets
-	 * into errored mode. Hence, as a workaround to this hardware
-	 * limitation, driver needs to assist in flushing. But the flushing
-	 * operation uses mailbox to convey the QP state to the hardware and
-	 * which can sleep due to the mutex protection around the mailbox calls.
-	 * Hence, use the deferred flush for now. Once wc error detected, the
-	 * flushing operation is needed.
-	 */
-	if (wc->status != IB_WC_SUCCESS &&
-	    wc->status != IB_WC_WR_FLUSH_ERR) {
-		ibdev_err(&hr_dev->ib_dev, "error cqe status is: 0x%x\n",
-			  status & HNS_ROCE_V2_CQE_STATUS_MASK);
-
-		if (!test_and_set_bit(HNS_ROCE_FLUSH_FLAG, &hr_qp->flush_flag))
-			init_flush_work(hr_dev, hr_qp);
-
-		return 0;
-	}
-
-	if (wc->status == IB_WC_WR_FLUSH_ERR)
+	get_cqe_status(hr_dev, *cur_qp, cqe, wc);
+	if (wc->status != IB_WC_SUCCESS)
 		return 0;
 
 	if (is_send) {
@@ -3757,7 +3728,7 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp,
 	int port;
 
 	/* Search qp buf's mtts */
-	page_size = 1 << (hr_dev->caps.mtt_buf_pg_sz + PAGE_SHIFT);
+	page_size = 1 << hr_qp->mtr.hem_cfg.buf_pg_shift;
 	count = hns_roce_mtr_find(hr_dev, &hr_qp->mtr,
 				  hr_qp->rq.offset / page_size, mtts,
 				  MTT_MIN_COUNT, &wqe_sge_ba);
@@ -3831,7 +3802,7 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp,
 	roce_set_field(context->byte_16_buf_ba_pg_sz,
 		       V2_QPC_BYTE_16_WQE_SGE_BA_PG_SZ_M,
 		       V2_QPC_BYTE_16_WQE_SGE_BA_PG_SZ_S,
-		       hr_qp->wqe_bt_pg_shift + PG_SHIFT_OFFSET);
+		       to_hr_hw_page_shift(hr_qp->mtr.hem_cfg.ba_pg_shift));
 	roce_set_field(qpc_mask->byte_16_buf_ba_pg_sz,
 		       V2_QPC_BYTE_16_WQE_SGE_BA_PG_SZ_M,
 		       V2_QPC_BYTE_16_WQE_SGE_BA_PG_SZ_S, 0);
@@ -3839,29 +3810,29 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp,
 	roce_set_field(context->byte_16_buf_ba_pg_sz,
 		       V2_QPC_BYTE_16_WQE_SGE_BUF_PG_SZ_M,
 		       V2_QPC_BYTE_16_WQE_SGE_BUF_PG_SZ_S,
-		       hr_dev->caps.mtt_buf_pg_sz + PG_SHIFT_OFFSET);
+		       to_hr_hw_page_shift(hr_qp->mtr.hem_cfg.buf_pg_shift));
 	roce_set_field(qpc_mask->byte_16_buf_ba_pg_sz,
 		       V2_QPC_BYTE_16_WQE_SGE_BUF_PG_SZ_M,
 		       V2_QPC_BYTE_16_WQE_SGE_BUF_PG_SZ_S, 0);
 
-	context->rq_cur_blk_addr = cpu_to_le32(mtts[0] >> PAGE_ADDR_SHIFT);
+	context->rq_cur_blk_addr = cpu_to_le32(to_hr_hw_page_addr(mtts[0]));
 	qpc_mask->rq_cur_blk_addr = 0;
 
 	roce_set_field(context->byte_92_srq_info,
 		       V2_QPC_BYTE_92_RQ_CUR_BLK_ADDR_M,
 		       V2_QPC_BYTE_92_RQ_CUR_BLK_ADDR_S,
-		       mtts[0] >> (32 + PAGE_ADDR_SHIFT));
+		       upper_32_bits(to_hr_hw_page_addr(mtts[0])));
 	roce_set_field(qpc_mask->byte_92_srq_info,
 		       V2_QPC_BYTE_92_RQ_CUR_BLK_ADDR_M,
 		       V2_QPC_BYTE_92_RQ_CUR_BLK_ADDR_S, 0);
 
-	context->rq_nxt_blk_addr = cpu_to_le32(mtts[1] >> PAGE_ADDR_SHIFT);
+	context->rq_nxt_blk_addr = cpu_to_le32(to_hr_hw_page_addr(mtts[1]));
 	qpc_mask->rq_nxt_blk_addr = 0;
 
 	roce_set_field(context->byte_104_rq_sge,
 		       V2_QPC_BYTE_104_RQ_NXT_BLK_ADDR_M,
 		       V2_QPC_BYTE_104_RQ_NXT_BLK_ADDR_S,
-		       mtts[1] >> (32 + PAGE_ADDR_SHIFT));
+		       upper_32_bits(to_hr_hw_page_addr(mtts[1])));
 	roce_set_field(qpc_mask->byte_104_rq_sge,
 		       V2_QPC_BYTE_104_RQ_NXT_BLK_ADDR_M,
 		       V2_QPC_BYTE_104_RQ_NXT_BLK_ADDR_S, 0);
@@ -3995,18 +3966,18 @@ static int modify_qp_rtr_to_rts(struct ib_qp *ibqp,
 	/* Search qp buf's mtts */
 	count = hns_roce_mtr_find(hr_dev, &hr_qp->mtr, 0, &sq_cur_blk, 1, NULL);
 	if (count < 1) {
-		ibdev_err(ibdev, "failed to find buf pa of QP(0x%lx)\n",
+		ibdev_err(ibdev, "failed to find QP(0x%lx) SQ buf\n",
 			  hr_qp->qpn);
 		return -EINVAL;
 	}
 
 	if (hr_qp->sge.offset) {
-		page_size = 1 << (hr_dev->caps.mtt_buf_pg_sz + PAGE_SHIFT);
+		page_size = 1 << hr_qp->mtr.hem_cfg.buf_pg_shift;
 		count = hns_roce_mtr_find(hr_dev, &hr_qp->mtr,
 					  hr_qp->sge.offset / page_size,
 					  &sge_cur_blk, 1, NULL);
 		if (count < 1) {
-			ibdev_err(ibdev, "failed to find sge pa of QP(0x%lx)\n",
+			ibdev_err(ibdev, "failed to find QP(0x%lx) SGE buf\n",
 				  hr_qp->qpn);
 			return -EINVAL;
 		}
@@ -4024,11 +3995,11 @@ static int modify_qp_rtr_to_rts(struct ib_qp *ibqp,
 	 * we should set all bits of the relevant fields in context mask to
 	 * 0 at the same time, else set them to 0x1.
 	 */
-	context->sq_cur_blk_addr = cpu_to_le32(sq_cur_blk >> PAGE_ADDR_SHIFT);
+	context->sq_cur_blk_addr = cpu_to_le32(to_hr_hw_page_addr(sq_cur_blk));
 	roce_set_field(context->byte_168_irrl_idx,
 		       V2_QPC_BYTE_168_SQ_CUR_BLK_ADDR_M,
 		       V2_QPC_BYTE_168_SQ_CUR_BLK_ADDR_S,
-		       sq_cur_blk >> (32 + PAGE_ADDR_SHIFT));
+		       upper_32_bits(to_hr_hw_page_addr(sq_cur_blk)));
 	qpc_mask->sq_cur_blk_addr = 0;
 	roce_set_field(qpc_mask->byte_168_irrl_idx,
 		       V2_QPC_BYTE_168_SQ_CUR_BLK_ADDR_M,
@@ -4036,26 +4007,24 @@ static int modify_qp_rtr_to_rts(struct ib_qp *ibqp,
 
 	context->sq_cur_sge_blk_addr = ((ibqp->qp_type == IB_QPT_GSI) ||
 		       hr_qp->sq.max_gs > HNS_ROCE_V2_UC_RC_SGE_NUM_IN_WQE) ?
-		       cpu_to_le32(sge_cur_blk >>
-		       PAGE_ADDR_SHIFT) : 0;
+		       cpu_to_le32(to_hr_hw_page_addr(sge_cur_blk)) : 0;
 	roce_set_field(context->byte_184_irrl_idx,
 		       V2_QPC_BYTE_184_SQ_CUR_SGE_BLK_ADDR_M,
 		       V2_QPC_BYTE_184_SQ_CUR_SGE_BLK_ADDR_S,
 		       ((ibqp->qp_type == IB_QPT_GSI) || hr_qp->sq.max_gs >
 		       HNS_ROCE_V2_UC_RC_SGE_NUM_IN_WQE) ?
-		       (sge_cur_blk >>
-		       (32 + PAGE_ADDR_SHIFT)) : 0);
+		       upper_32_bits(to_hr_hw_page_addr(sge_cur_blk)) : 0);
 	qpc_mask->sq_cur_sge_blk_addr = 0;
 	roce_set_field(qpc_mask->byte_184_irrl_idx,
 		       V2_QPC_BYTE_184_SQ_CUR_SGE_BLK_ADDR_M,
 		       V2_QPC_BYTE_184_SQ_CUR_SGE_BLK_ADDR_S, 0);
 
 	context->rx_sq_cur_blk_addr =
-		cpu_to_le32(sq_cur_blk >> PAGE_ADDR_SHIFT);
+		cpu_to_le32(to_hr_hw_page_addr(sq_cur_blk));
 	roce_set_field(context->byte_232_irrl_sge,
 		       V2_QPC_BYTE_232_RX_SQ_CUR_BLK_ADDR_M,
 		       V2_QPC_BYTE_232_RX_SQ_CUR_BLK_ADDR_S,
-		       sq_cur_blk >> (32 + PAGE_ADDR_SHIFT));
+		       upper_32_bits(to_hr_hw_page_addr(sq_cur_blk)));
 	qpc_mask->rx_sq_cur_blk_addr = 0;
 	roce_set_field(qpc_mask->byte_232_irrl_sge,
 		       V2_QPC_BYTE_232_RX_SQ_CUR_BLK_ADDR_M,
@@ -4108,21 +4077,6 @@ static int modify_qp_rtr_to_rts(struct ib_qp *ibqp,
 	return 0;
 }
 
-static inline bool hns_roce_v2_check_qp_stat(enum ib_qp_state cur_state,
-					     enum ib_qp_state new_state)
-{
-
-	if ((cur_state != IB_QPS_RESET &&
-	    (new_state == IB_QPS_ERR || new_state == IB_QPS_RESET)) ||
-	    ((cur_state == IB_QPS_RTS || cur_state == IB_QPS_SQD) &&
-	    (new_state == IB_QPS_RTS || new_state == IB_QPS_SQD)) ||
-	    (cur_state == IB_QPS_SQE && new_state == IB_QPS_RTS))
-		return true;
-
-	return false;
-
-}
-
 static int hns_roce_v2_set_path(struct ib_qp *ibqp,
 				const struct ib_qp_attr *attr,
 				int attr_mask,
@@ -4226,6 +4180,28 @@ static int hns_roce_v2_set_path(struct ib_qp *ibqp,
 	return 0;
 }
 
+static bool check_qp_state(enum ib_qp_state cur_state,
+			   enum ib_qp_state new_state)
+{
+	static const bool sm[][IB_QPS_ERR + 1] = {
+		[IB_QPS_RESET] = { [IB_QPS_RESET] = true,
+				   [IB_QPS_INIT] = true },
+		[IB_QPS_INIT] = { [IB_QPS_RESET] = true,
+				  [IB_QPS_INIT] = true,
+				  [IB_QPS_RTR] = true,
+				  [IB_QPS_ERR] = true },
+		[IB_QPS_RTR] = { [IB_QPS_RESET] = true,
+				 [IB_QPS_RTS] = true,
+				 [IB_QPS_ERR] = true },
+		[IB_QPS_RTS] = { [IB_QPS_RESET] = true, [IB_QPS_ERR] = true },
+		[IB_QPS_SQD] = {},
+		[IB_QPS_SQE] = {},
+		[IB_QPS_ERR] = { [IB_QPS_RESET] = true, [IB_QPS_ERR] = true }
+	};
+
+	return sm[cur_state][new_state];
+}
+
 static int hns_roce_v2_set_abs_fields(struct ib_qp *ibqp,
 				      const struct ib_qp_attr *attr,
 				      int attr_mask,
@@ -4237,6 +4213,11 @@ static int hns_roce_v2_set_abs_fields(struct ib_qp *ibqp,
 	struct hns_roce_dev *hr_dev = to_hr_dev(ibqp->device);
 	int ret = 0;
 
+	if (!check_qp_state(cur_state, new_state)) {
+		ibdev_err(&hr_dev->ib_dev, "Illegal state for QP!\n");
+		return -EINVAL;
+	}
+
 	if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) {
 		memset(qpc_mask, 0, sizeof(*qpc_mask));
 		modify_qp_reset_to_init(ibqp, attr, attr_mask, context,
@@ -4247,23 +4228,11 @@ static int hns_roce_v2_set_abs_fields(struct ib_qp *ibqp,
 	} else if (cur_state == IB_QPS_INIT && new_state == IB_QPS_RTR) {
 		ret = modify_qp_init_to_rtr(ibqp, attr, attr_mask, context,
 					    qpc_mask);
-		if (ret)
-			goto out;
 	} else if (cur_state == IB_QPS_RTR && new_state == IB_QPS_RTS) {
 		ret = modify_qp_rtr_to_rts(ibqp, attr, attr_mask, context,
 					   qpc_mask);
-		if (ret)
-			goto out;
-	} else if (hns_roce_v2_check_qp_stat(cur_state, new_state)) {
-		/* Nothing */
-		;
-	} else {
-		ibdev_err(&hr_dev->ib_dev, "Illegal state for QP!\n");
-		ret = -EINVAL;
-		goto out;
 	}
 
-out:
 	return ret;
 }
 
@@ -4554,19 +4523,20 @@ static int hns_roce_v2_modify_qp(struct ib_qp *ibqp,
 	return ret;
 }
 
-static inline enum ib_qp_state to_ib_qp_st(enum hns_roce_v2_qp_state state)
+static int to_ib_qp_st(enum hns_roce_v2_qp_state state)
 {
-	switch (state) {
-	case HNS_ROCE_QP_ST_RST:	return IB_QPS_RESET;
-	case HNS_ROCE_QP_ST_INIT:	return IB_QPS_INIT;
-	case HNS_ROCE_QP_ST_RTR:	return IB_QPS_RTR;
-	case HNS_ROCE_QP_ST_RTS:	return IB_QPS_RTS;
-	case HNS_ROCE_QP_ST_SQ_DRAINING:
-	case HNS_ROCE_QP_ST_SQD:	return IB_QPS_SQD;
-	case HNS_ROCE_QP_ST_SQER:	return IB_QPS_SQE;
-	case HNS_ROCE_QP_ST_ERR:	return IB_QPS_ERR;
-	default:			return -1;
-	}
+	static const enum ib_qp_state map[] = {
+		[HNS_ROCE_QP_ST_RST] = IB_QPS_RESET,
+		[HNS_ROCE_QP_ST_INIT] = IB_QPS_INIT,
+		[HNS_ROCE_QP_ST_RTR] = IB_QPS_RTR,
+		[HNS_ROCE_QP_ST_RTS] = IB_QPS_RTS,
+		[HNS_ROCE_QP_ST_SQD] = IB_QPS_SQD,
+		[HNS_ROCE_QP_ST_SQER] = IB_QPS_SQE,
+		[HNS_ROCE_QP_ST_ERR] = IB_QPS_ERR,
+		[HNS_ROCE_QP_ST_SQ_DRAINING] = IB_QPS_SQD
+	};
+
+	return (state < ARRAY_SIZE(map)) ? map[state] : -1;
 }
 
 static int hns_roce_v2_query_qpc(struct hns_roce_dev *hr_dev,
@@ -4989,24 +4959,14 @@ static void set_eq_cons_index_v2(struct hns_roce_eq *eq)
 	hns_roce_write64(hr_dev, doorbell, eq->doorbell);
 }
 
-static inline void *get_eqe_buf(struct hns_roce_eq *eq, unsigned long offset)
-{
-	u32 buf_chk_sz;
-
-	buf_chk_sz = 1 << (eq->eqe_buf_pg_sz + PAGE_SHIFT);
-	if (eq->buf.nbufs == 1)
-		return eq->buf.direct.buf + offset % buf_chk_sz;
-	else
-		return eq->buf.page_list[offset / buf_chk_sz].buf +
-		       offset % buf_chk_sz;
-}
-
 static struct hns_roce_aeqe *next_aeqe_sw_v2(struct hns_roce_eq *eq)
 {
 	struct hns_roce_aeqe *aeqe;
 
-	aeqe = get_eqe_buf(eq, (eq->cons_index & (eq->entries - 1)) *
-			   HNS_ROCE_AEQ_ENTRY_SIZE);
+	aeqe = hns_roce_buf_offset(eq->mtr.kmem,
+				   (eq->cons_index & (eq->entries - 1)) *
+				   HNS_ROCE_AEQ_ENTRY_SIZE);
+
 	return (roce_get_bit(aeqe->asyn, HNS_ROCE_V2_AEQ_AEQE_OWNER_S) ^
 		!!(eq->cons_index & eq->entries)) ? aeqe : NULL;
 }
@@ -5103,8 +5063,9 @@ static struct hns_roce_ceqe *next_ceqe_sw_v2(struct hns_roce_eq *eq)
 {
 	struct hns_roce_ceqe *ceqe;
 
-	ceqe = get_eqe_buf(eq, (eq->cons_index & (eq->entries - 1)) *
-			   HNS_ROCE_CEQ_ENTRY_SIZE);
+	ceqe = hns_roce_buf_offset(eq->mtr.kmem,
+				   (eq->cons_index & (eq->entries - 1)) *
+				   HNS_ROCE_CEQ_ENTRY_SIZE);
 	return (!!(roce_get_bit(ceqe->comp, HNS_ROCE_V2_CEQ_CEQE_OWNER_S))) ^
 		(!!(eq->cons_index & eq->entries)) ? ceqe : NULL;
 }
@@ -5263,17 +5224,15 @@ static void hns_roce_v2_destroy_eqc(struct hns_roce_dev *hr_dev, int eqn)
 
 static void free_eq_buf(struct hns_roce_dev *hr_dev, struct hns_roce_eq *eq)
 {
-	if (!eq->hop_num || eq->hop_num == HNS_ROCE_HOP_NUM_0)
-		hns_roce_mtr_cleanup(hr_dev, &eq->mtr);
-	hns_roce_buf_free(hr_dev, eq->buf.size, &eq->buf);
+	hns_roce_mtr_destroy(hr_dev, &eq->mtr);
 }
 
-static void hns_roce_config_eqc(struct hns_roce_dev *hr_dev,
-				struct hns_roce_eq *eq,
-				void *mb_buf)
+static int config_eqc(struct hns_roce_dev *hr_dev, struct hns_roce_eq *eq,
+		      void *mb_buf)
 {
+	u64 eqe_ba[MTT_MIN_COUNT] = { 0 };
 	struct hns_roce_eq_context *eqc;
-	u64 ba[MTT_MIN_COUNT] = { 0 };
+	u64 bt_ba = 0;
 	int count;
 
 	eqc = mb_buf;
@@ -5281,31 +5240,18 @@ static void hns_roce_config_eqc(struct hns_roce_dev *hr_dev,
 
 	/* init eqc */
 	eq->doorbell = hr_dev->reg_base + ROCEE_VF_EQ_DB_CFG0_REG;
-	eq->hop_num = hr_dev->caps.eqe_hop_num;
 	eq->cons_index = 0;
 	eq->over_ignore = HNS_ROCE_V2_EQ_OVER_IGNORE_0;
 	eq->coalesce = HNS_ROCE_V2_EQ_COALESCE_0;
 	eq->arm_st = HNS_ROCE_V2_EQ_ALWAYS_ARMED;
-	eq->eqe_ba_pg_sz = hr_dev->caps.eqe_ba_pg_sz;
-	eq->eqe_buf_pg_sz = hr_dev->caps.eqe_buf_pg_sz;
 	eq->shift = ilog2((unsigned int)eq->entries);
 
-	/* if not muti-hop, eqe buffer only use one trunk */
-	if (!eq->hop_num || eq->hop_num == HNS_ROCE_HOP_NUM_0) {
-		eq->eqe_ba = eq->buf.direct.map;
-		eq->cur_eqe_ba = eq->eqe_ba;
-		if (eq->buf.npages > 1)
-			eq->nxt_eqe_ba = eq->eqe_ba + (1 << eq->eqe_buf_pg_sz);
-		else
-			eq->nxt_eqe_ba = eq->eqe_ba;
-	} else {
-		count = hns_roce_mtr_find(hr_dev, &eq->mtr, 0, ba,
-					  MTT_MIN_COUNT, &eq->eqe_ba);
-		eq->cur_eqe_ba = ba[0];
-		if (count > 1)
-			eq->nxt_eqe_ba = ba[1];
-		else
-			eq->nxt_eqe_ba = ba[0];
+	/* if not multi-hop, eqe buffer only use one trunk */
+	count = hns_roce_mtr_find(hr_dev, &eq->mtr, 0, eqe_ba, MTT_MIN_COUNT,
+				  &bt_ba);
+	if (count < 1) {
+		dev_err(hr_dev->dev, "failed to find EQE mtr\n");
+		return -ENOBUFS;
 	}
 
 	/* set eqc state */
@@ -5339,12 +5285,12 @@ static void hns_roce_config_eqc(struct hns_roce_dev *hr_dev,
 	/* set eqe_ba_pg_sz */
 	roce_set_field(eqc->byte_8, HNS_ROCE_EQC_BA_PG_SZ_M,
 		       HNS_ROCE_EQC_BA_PG_SZ_S,
-		       eq->eqe_ba_pg_sz + PG_SHIFT_OFFSET);
+		       to_hr_hw_page_shift(eq->mtr.hem_cfg.ba_pg_shift));
 
 	/* set eqe_buf_pg_sz */
 	roce_set_field(eqc->byte_8, HNS_ROCE_EQC_BUF_PG_SZ_M,
 		       HNS_ROCE_EQC_BUF_PG_SZ_S,
-		       eq->eqe_buf_pg_sz + PG_SHIFT_OFFSET);
+		       to_hr_hw_page_shift(eq->mtr.hem_cfg.buf_pg_shift));
 
 	/* set eq_producer_idx */
 	roce_set_field(eqc->byte_8, HNS_ROCE_EQC_PROD_INDX_M,
@@ -5363,13 +5309,13 @@ static void hns_roce_config_eqc(struct hns_roce_dev *hr_dev,
 		       HNS_ROCE_EQC_REPORT_TIMER_S,
 		       HNS_ROCE_EQ_INIT_REPORT_TIMER);
 
-	/* set eqe_ba [34:3] */
+	/* set bt_ba [34:3] */
 	roce_set_field(eqc->eqe_ba0, HNS_ROCE_EQC_EQE_BA_L_M,
-		       HNS_ROCE_EQC_EQE_BA_L_S, eq->eqe_ba >> 3);
+		       HNS_ROCE_EQC_EQE_BA_L_S, bt_ba >> 3);
 
-	/* set eqe_ba [64:35] */
+	/* set bt_ba [64:35] */
 	roce_set_field(eqc->eqe_ba1, HNS_ROCE_EQC_EQE_BA_H_M,
-		       HNS_ROCE_EQC_EQE_BA_H_S, eq->eqe_ba >> 35);
+		       HNS_ROCE_EQC_EQE_BA_H_S, bt_ba >> 35);
 
 	/* set eq shift */
 	roce_set_field(eqc->byte_28, HNS_ROCE_EQC_SHIFT_M, HNS_ROCE_EQC_SHIFT_S,
@@ -5381,15 +5327,15 @@ static void hns_roce_config_eqc(struct hns_roce_dev *hr_dev,
 
 	/* set cur_eqe_ba [27:12] */
 	roce_set_field(eqc->byte_28, HNS_ROCE_EQC_CUR_EQE_BA_L_M,
-		       HNS_ROCE_EQC_CUR_EQE_BA_L_S, eq->cur_eqe_ba >> 12);
+		       HNS_ROCE_EQC_CUR_EQE_BA_L_S, eqe_ba[0] >> 12);
 
 	/* set cur_eqe_ba [59:28] */
 	roce_set_field(eqc->byte_32, HNS_ROCE_EQC_CUR_EQE_BA_M_M,
-		       HNS_ROCE_EQC_CUR_EQE_BA_M_S, eq->cur_eqe_ba >> 28);
+		       HNS_ROCE_EQC_CUR_EQE_BA_M_S, eqe_ba[0] >> 28);
 
 	/* set cur_eqe_ba [63:60] */
 	roce_set_field(eqc->byte_36, HNS_ROCE_EQC_CUR_EQE_BA_H_M,
-		       HNS_ROCE_EQC_CUR_EQE_BA_H_S, eq->cur_eqe_ba >> 60);
+		       HNS_ROCE_EQC_CUR_EQE_BA_H_S, eqe_ba[0] >> 60);
 
 	/* set eq consumer idx */
 	roce_set_field(eqc->byte_36, HNS_ROCE_EQC_CONS_INDX_M,
@@ -5397,97 +5343,38 @@ static void hns_roce_config_eqc(struct hns_roce_dev *hr_dev,
 
 	/* set nex_eqe_ba[43:12] */
 	roce_set_field(eqc->nxt_eqe_ba0, HNS_ROCE_EQC_NXT_EQE_BA_L_M,
-		       HNS_ROCE_EQC_NXT_EQE_BA_L_S, eq->nxt_eqe_ba >> 12);
+		       HNS_ROCE_EQC_NXT_EQE_BA_L_S, eqe_ba[1] >> 12);
 
 	/* set nex_eqe_ba[63:44] */
 	roce_set_field(eqc->nxt_eqe_ba1, HNS_ROCE_EQC_NXT_EQE_BA_H_M,
-		       HNS_ROCE_EQC_NXT_EQE_BA_H_S, eq->nxt_eqe_ba >> 44);
-}
-
-static int map_eq_buf(struct hns_roce_dev *hr_dev, struct hns_roce_eq *eq,
-		      u32 page_shift)
-{
-	struct hns_roce_buf_region region = {};
-	dma_addr_t *buf_list = NULL;
-	int ba_num;
-	int ret;
-
-	ba_num = DIV_ROUND_UP(PAGE_ALIGN(eq->entries * eq->eqe_size),
-			      1 << page_shift);
-	hns_roce_init_buf_region(&region, hr_dev->caps.eqe_hop_num, 0, ba_num);
-
-	/* alloc a tmp list for storing eq buf address */
-	ret = hns_roce_alloc_buf_list(&region, &buf_list, 1);
-	if (ret) {
-		dev_err(hr_dev->dev, "alloc eq buf_list error\n");
-		return ret;
-	}
-
-	ba_num = hns_roce_get_kmem_bufs(hr_dev, buf_list, region.count,
-					region.offset, &eq->buf);
-	if (ba_num != region.count) {
-		dev_err(hr_dev->dev, "get eqe buf err,expect %d,ret %d.\n",
-			region.count, ba_num);
-		ret = -ENOBUFS;
-		goto done;
-	}
-
-	hns_roce_mtr_init(&eq->mtr, PAGE_SHIFT + hr_dev->caps.eqe_ba_pg_sz,
-			  page_shift);
-	ret = hns_roce_mtr_attach(hr_dev, &eq->mtr, &buf_list, &region, 1);
-	if (ret)
-		dev_err(hr_dev->dev, "mtr attach error for eqe\n");
-
-	goto done;
-
-	hns_roce_mtr_cleanup(hr_dev, &eq->mtr);
-done:
-	hns_roce_free_buf_list(&buf_list, 1);
+		       HNS_ROCE_EQC_NXT_EQE_BA_H_S, eqe_ba[1] >> 44);
 
-	return ret;
+	return 0;
 }
 
 static int alloc_eq_buf(struct hns_roce_dev *hr_dev, struct hns_roce_eq *eq)
 {
-	struct hns_roce_buf *buf = &eq->buf;
-	bool is_mhop = false;
-	u32 page_shift;
-	u32 mhop_num;
-	u32 max_size;
-	int ret;
+	struct hns_roce_buf_attr buf_attr = {};
+	int err;
 
-	page_shift = PAGE_SHIFT + hr_dev->caps.eqe_buf_pg_sz;
-	mhop_num = hr_dev->caps.eqe_hop_num;
-	if (!mhop_num) {
-		max_size = 1 << page_shift;
-		buf->size = max_size;
-	} else if (mhop_num == HNS_ROCE_HOP_NUM_0) {
-		max_size = eq->entries * eq->eqe_size;
-		buf->size = max_size;
-	} else {
-		max_size = 1 << page_shift;
-		buf->size = PAGE_ALIGN(eq->entries * eq->eqe_size);
-		is_mhop = true;
-	}
+	if (hr_dev->caps.eqe_hop_num == HNS_ROCE_HOP_NUM_0)
+		eq->hop_num = 0;
+	else
+		eq->hop_num = hr_dev->caps.eqe_hop_num;
 
-	ret = hns_roce_buf_alloc(hr_dev, buf->size, max_size, buf, page_shift);
-	if (ret) {
-		dev_err(hr_dev->dev, "alloc eq buf error\n");
-		return ret;
-	}
+	buf_attr.page_shift = hr_dev->caps.eqe_buf_pg_sz + PAGE_ADDR_SHIFT;
+	buf_attr.region[0].size = eq->entries * eq->eqe_size;
+	buf_attr.region[0].hopnum = eq->hop_num;
+	buf_attr.region_count = 1;
+	buf_attr.fixed_page = true;
 
-	if (is_mhop) {
-		ret = map_eq_buf(hr_dev, eq, page_shift);
-		if (ret) {
-			dev_err(hr_dev->dev, "map roce buf error\n");
-			goto err_alloc;
-		}
-	}
+	err = hns_roce_mtr_create(hr_dev, &eq->mtr, &buf_attr,
+				  hr_dev->caps.srqwqe_ba_pg_sz +
+				  PAGE_ADDR_SHIFT, NULL, 0);
+	if (err)
+		dev_err(hr_dev->dev, "Failed to alloc EQE mtr, err %d\n", err);
 
-	return 0;
-err_alloc:
-	hns_roce_buf_free(hr_dev, buf->size, buf);
-	return ret;
+	return err;
 }
 
 static int hns_roce_v2_create_eq(struct hns_roce_dev *hr_dev,
@@ -5499,15 +5386,16 @@ static int hns_roce_v2_create_eq(struct hns_roce_dev *hr_dev,
 
 	/* Allocate mailbox memory */
 	mailbox = hns_roce_alloc_cmd_mailbox(hr_dev);
-	if (IS_ERR(mailbox))
-		return PTR_ERR(mailbox);
+	if (IS_ERR_OR_NULL(mailbox))
+		return -ENOMEM;
 
 	ret = alloc_eq_buf(hr_dev, eq);
-	if (ret) {
-		ret = -ENOMEM;
+	if (ret)
 		goto free_cmd_mbox;
-	}
-	hns_roce_config_eqc(hr_dev, eq, mailbox->buf);
+
+	ret = config_eqc(hr_dev, eq, mailbox->buf);
+	if (ret)
+		goto err_cmd_mbox;
 
 	ret = hns_roce_cmd_mbox(hr_dev, mailbox->dma, 0, eq->eqn, 0,
 				eq_cmd, HNS_ROCE_CMD_TIMEOUT_MSECS);
@@ -5783,43 +5671,45 @@ static void hns_roce_v2_write_srqc(struct hns_roce_dev *hr_dev,
 		       dma_handle_idx >> 35);
 
 	srq_context->idx_cur_blk_addr =
-		cpu_to_le32(mtts_idx[0] >> PAGE_ADDR_SHIFT);
+		cpu_to_le32(to_hr_hw_page_addr(mtts_idx[0]));
 	roce_set_field(srq_context->byte_44_idxbufpgsz_addr,
 		       SRQC_BYTE_44_SRQ_IDX_CUR_BLK_ADDR_M,
 		       SRQC_BYTE_44_SRQ_IDX_CUR_BLK_ADDR_S,
-		       mtts_idx[0] >> (32 + PAGE_ADDR_SHIFT));
+		       upper_32_bits(to_hr_hw_page_addr(mtts_idx[0])));
 	roce_set_field(srq_context->byte_44_idxbufpgsz_addr,
 		       SRQC_BYTE_44_SRQ_IDX_HOP_NUM_M,
 		       SRQC_BYTE_44_SRQ_IDX_HOP_NUM_S,
 		       hr_dev->caps.idx_hop_num == HNS_ROCE_HOP_NUM_0 ? 0 :
 		       hr_dev->caps.idx_hop_num);
 
-	roce_set_field(srq_context->byte_44_idxbufpgsz_addr,
-		       SRQC_BYTE_44_SRQ_IDX_BA_PG_SZ_M,
-		       SRQC_BYTE_44_SRQ_IDX_BA_PG_SZ_S,
-		       hr_dev->caps.idx_ba_pg_sz + PG_SHIFT_OFFSET);
-	roce_set_field(srq_context->byte_44_idxbufpgsz_addr,
-		       SRQC_BYTE_44_SRQ_IDX_BUF_PG_SZ_M,
-		       SRQC_BYTE_44_SRQ_IDX_BUF_PG_SZ_S,
-		       hr_dev->caps.idx_buf_pg_sz + PG_SHIFT_OFFSET);
+	roce_set_field(
+		srq_context->byte_44_idxbufpgsz_addr,
+		SRQC_BYTE_44_SRQ_IDX_BA_PG_SZ_M,
+		SRQC_BYTE_44_SRQ_IDX_BA_PG_SZ_S,
+		to_hr_hw_page_shift(srq->idx_que.mtr.hem_cfg.ba_pg_shift));
+	roce_set_field(
+		srq_context->byte_44_idxbufpgsz_addr,
+		SRQC_BYTE_44_SRQ_IDX_BUF_PG_SZ_M,
+		SRQC_BYTE_44_SRQ_IDX_BUF_PG_SZ_S,
+		to_hr_hw_page_shift(srq->idx_que.mtr.hem_cfg.buf_pg_shift));
 
 	srq_context->idx_nxt_blk_addr =
-		cpu_to_le32(mtts_idx[1] >> PAGE_ADDR_SHIFT);
+		cpu_to_le32(to_hr_hw_page_addr(mtts_idx[1]));
 	roce_set_field(srq_context->rsv_idxnxtblkaddr,
 		       SRQC_BYTE_52_SRQ_IDX_NXT_BLK_ADDR_M,
 		       SRQC_BYTE_52_SRQ_IDX_NXT_BLK_ADDR_S,
-		       mtts_idx[1] >> (32 + PAGE_ADDR_SHIFT));
+		       upper_32_bits(to_hr_hw_page_addr(mtts_idx[1])));
 	roce_set_field(srq_context->byte_56_xrc_cqn,
 		       SRQC_BYTE_56_SRQ_XRC_CQN_M, SRQC_BYTE_56_SRQ_XRC_CQN_S,
 		       cqn);
 	roce_set_field(srq_context->byte_56_xrc_cqn,
 		       SRQC_BYTE_56_SRQ_WQE_BA_PG_SZ_M,
 		       SRQC_BYTE_56_SRQ_WQE_BA_PG_SZ_S,
-		       hr_dev->caps.srqwqe_ba_pg_sz + PG_SHIFT_OFFSET);
+		       to_hr_hw_page_shift(srq->buf_mtr.hem_cfg.ba_pg_shift));
 	roce_set_field(srq_context->byte_56_xrc_cqn,
 		       SRQC_BYTE_56_SRQ_WQE_BUF_PG_SZ_M,
 		       SRQC_BYTE_56_SRQ_WQE_BUF_PG_SZ_S,
-		       hr_dev->caps.srqwqe_buf_pg_sz + PG_SHIFT_OFFSET);
+		       to_hr_hw_page_shift(srq->buf_mtr.hem_cfg.buf_pg_shift));
 
 	roce_set_bit(srq_context->db_record_addr_record_en,
 		     SRQC_BYTE_60_SRQ_RECORD_EN_S, 0);
@@ -5931,7 +5821,7 @@ static void fill_idx_queue(struct hns_roce_idx_que *idx_que,
 {
 	unsigned int *addr;
 
-	addr = (unsigned int *)hns_roce_buf_offset(&idx_que->idx_buf,
+	addr = (unsigned int *)hns_roce_buf_offset(idx_que->mtr.kmem,
 						   cur_idx * idx_que->entry_sz);
 	*addr = wqe_idx;
 }
diff --git a/drivers/infiniband/hw/hns/hns_roce_mr.c b/drivers/infiniband/hw/hns/hns_roce_mr.c
index 176f34692f88..99e3876e712c 100644
--- a/drivers/infiniband/hw/hns/hns_roce_mr.c
+++ b/drivers/infiniband/hw/hns/hns_roce_mr.c
@@ -900,13 +900,9 @@ int hns_roce_buf_write_mtt(struct hns_roce_dev *hr_dev,
 	if (!page_list)
 		return -ENOMEM;
 
-	for (i = 0; i < buf->npages; ++i) {
-		if (buf->nbufs == 1)
-			page_list[i] = buf->direct.map + (i << buf->page_shift);
-		else
-			page_list[i] = buf->page_list[i].map;
+	for (i = 0; i < buf->npages; ++i)
+		page_list[i] = hns_roce_buf_page(buf, i);
 
-	}
 	ret = hns_roce_write_mtt(hr_dev, mtt, 0, buf->npages, page_list);
 
 	kfree(page_list);
@@ -1567,8 +1563,9 @@ int hns_roce_dealloc_mw(struct ib_mw *ibmw)
 void hns_roce_mtr_init(struct hns_roce_mtr *mtr, int bt_pg_shift,
 		       int buf_pg_shift)
 {
-	hns_roce_hem_list_init(&mtr->hem_list, bt_pg_shift);
-	mtr->buf_pg_shift = buf_pg_shift;
+	hns_roce_hem_list_init(&mtr->hem_list);
+	mtr->hem_cfg.buf_pg_shift = buf_pg_shift;
+	mtr->hem_cfg.ba_pg_shift = bt_pg_shift;
 }
 
 void hns_roce_mtr_cleanup(struct hns_roce_dev *hr_dev,
@@ -1577,19 +1574,23 @@ void hns_roce_mtr_cleanup(struct hns_roce_dev *hr_dev,
 	hns_roce_hem_list_release(hr_dev, &mtr->hem_list);
 }
 
-static int hns_roce_write_mtr(struct hns_roce_dev *hr_dev,
-			      struct hns_roce_mtr *mtr, dma_addr_t *bufs,
-			      struct hns_roce_buf_region *r)
+static int mtr_map_region(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
+			  dma_addr_t *pages, struct hns_roce_buf_region *region)
 {
+	__le64 *mtts;
 	int offset;
 	int count;
 	int npage;
-	u64 *mtts;
+	u64 addr;
 	int end;
 	int i;
 
-	offset = r->offset;
-	end = offset + r->count;
+	/* if hopnum is 0, buffer cannot store BAs, so skip write mtt */
+	if (!region->hopnum)
+		return 0;
+
+	offset = region->offset;
+	end = offset + region->count;
 	npage = 0;
 	while (offset < end) {
 		mtts = hns_roce_hem_list_find_mtt(hr_dev, &mtr->hem_list,
@@ -1597,13 +1598,13 @@ static int hns_roce_write_mtr(struct hns_roce_dev *hr_dev,
 		if (!mtts)
 			return -ENOBUFS;
 
-		/* Save page addr, low 12 bits : 0 */
 		for (i = 0; i < count; i++) {
 			if (hr_dev->hw_rev == HNS_ROCE_HW_VER1)
-				mtts[i] = bufs[npage] >> PAGE_ADDR_SHIFT;
+				addr = to_hr_hw_page_addr(pages[npage]);
 			else
-				mtts[i] = bufs[npage];
+				addr = pages[npage];
 
+			mtts[i] = cpu_to_le64(addr);
 			npage++;
 		}
 		offset += count;
@@ -1621,13 +1622,14 @@ int hns_roce_mtr_attach(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
 	int i;
 
 	ret = hns_roce_hem_list_request(hr_dev, &mtr->hem_list, regions,
-					region_cnt);
+					region_cnt, mtr->hem_cfg.ba_pg_shift);
 	if (ret)
 		return ret;
 
+	mtr->hem_cfg.root_ba = mtr->hem_list.root_ba;
 	for (i = 0; i < region_cnt; i++) {
 		r = &regions[i];
-		ret = hns_roce_write_mtr(hr_dev, mtr, bufs[i], r);
+		ret = mtr_map_region(hr_dev, mtr, bufs[i], r);
 		if (ret) {
 			dev_err(hr_dev->dev,
 				"write mtr[%d/%d] err %d,offset=%d.\n",
@@ -1644,37 +1646,412 @@ int hns_roce_mtr_attach(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
 	return ret;
 }
 
+static inline bool mtr_has_mtt(struct hns_roce_buf_attr *attr)
+{
+	int i;
+
+	for (i = 0; i < attr->region_count; i++)
+		if (attr->region[i].hopnum != HNS_ROCE_HOP_NUM_0 &&
+		    attr->region[i].hopnum > 0)
+			return true;
+
+	/* because the mtr only one root base address, when hopnum is 0 means
+	 * root base address equals the first buffer address, thus all alloced
+	 * memory must in a continuous space accessed by direct mode.
+	 */
+	return false;
+}
+
+static inline size_t mtr_bufs_size(struct hns_roce_buf_attr *attr)
+{
+	size_t size = 0;
+	int i;
+
+	for (i = 0; i < attr->region_count; i++)
+		size += attr->region[i].size;
+
+	return size;
+}
+
+static inline int mtr_umem_page_count(struct ib_umem *umem, int page_shift)
+{
+	int count = ib_umem_page_count(umem);
+
+	if (page_shift >= PAGE_SHIFT)
+		count >>= page_shift - PAGE_SHIFT;
+	else
+		count <<= PAGE_SHIFT - page_shift;
+
+	return count;
+}
+
+static inline size_t mtr_kmem_direct_size(bool is_direct, size_t alloc_size,
+					  int page_shift)
+{
+	if (is_direct)
+		return ALIGN(alloc_size, 1 << page_shift);
+	else
+		return HNS_HW_DIRECT_PAGE_COUNT << page_shift;
+}
+
+/*
+ * check the given pages in continuous address space
+ * Returns 0 on success, or the error page num.
+ */
+static inline int mtr_check_direct_pages(dma_addr_t *pages, int page_count,
+					 int page_shift)
+{
+	size_t page_size = 1 << page_shift;
+	int i;
+
+	for (i = 1; i < page_count; i++)
+		if (pages[i] - pages[i - 1] != page_size)
+			return i;
+
+	return 0;
+}
+
+static void mtr_free_bufs(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr)
+{
+	/* release user buffers */
+	if (mtr->umem) {
+		ib_umem_release(mtr->umem);
+		mtr->umem = NULL;
+	}
+
+	/* release kernel buffers */
+	if (mtr->kmem) {
+		hns_roce_buf_free(hr_dev, mtr->kmem);
+		kfree(mtr->kmem);
+		mtr->kmem = NULL;
+	}
+}
+
+static int mtr_alloc_bufs(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
+			  struct hns_roce_buf_attr *buf_attr, bool is_direct,
+			  struct ib_udata *udata, unsigned long user_addr)
+{
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	int max_pg_shift = buf_attr->page_shift;
+	int best_pg_shift = 0;
+	int all_pg_count = 0;
+	size_t direct_size;
+	size_t total_size;
+	unsigned long tmp;
+	int ret = 0;
+
+	total_size = mtr_bufs_size(buf_attr);
+	if (total_size < 1) {
+		ibdev_err(ibdev, "Failed to check mtr size\n");
+		return -EINVAL;
+	}
+
+	if (udata) {
+		mtr->kmem = NULL;
+		mtr->umem = ib_umem_get(ibdev, user_addr, total_size,
+					buf_attr->user_access);
+		if (IS_ERR_OR_NULL(mtr->umem)) {
+			ibdev_err(ibdev, "Failed to get umem, ret %ld\n",
+				  PTR_ERR(mtr->umem));
+			return -ENOMEM;
+		}
+		if (buf_attr->fixed_page) {
+			best_pg_shift = max_pg_shift;
+		} else {
+			tmp = GENMASK(max_pg_shift, 0);
+			ret = ib_umem_find_best_pgsz(mtr->umem, tmp, user_addr);
+			best_pg_shift = (ret <= PAGE_SIZE) ?
+					PAGE_SHIFT : ilog2(ret);
+		}
+		all_pg_count = mtr_umem_page_count(mtr->umem, best_pg_shift);
+		ret = 0;
+	} else {
+		mtr->umem = NULL;
+		mtr->kmem = kzalloc(sizeof(*mtr->kmem), GFP_KERNEL);
+		if (!mtr->kmem) {
+			ibdev_err(ibdev, "Failed to alloc kmem\n");
+			return -ENOMEM;
+		}
+		direct_size = mtr_kmem_direct_size(is_direct, total_size,
+						   max_pg_shift);
+		ret = hns_roce_buf_alloc(hr_dev, total_size, direct_size,
+					 mtr->kmem, max_pg_shift);
+		if (ret) {
+			ibdev_err(ibdev, "Failed to alloc kmem, ret %d\n", ret);
+			goto err_alloc_mem;
+		} else {
+			best_pg_shift = max_pg_shift;
+			all_pg_count = mtr->kmem->npages;
+		}
+	}
+
+	/* must bigger than minimum hardware page shift */
+	if (best_pg_shift < PAGE_ADDR_SHIFT || all_pg_count < 1) {
+		ret = -EINVAL;
+		ibdev_err(ibdev, "Failed to check mtr page shift %d count %d\n",
+			  best_pg_shift, all_pg_count);
+		goto err_alloc_mem;
+	}
+
+	mtr->hem_cfg.buf_pg_shift = best_pg_shift;
+	mtr->hem_cfg.buf_pg_count = all_pg_count;
+
+	return 0;
+err_alloc_mem:
+	mtr_free_bufs(hr_dev, mtr);
+	return ret;
+}
+
+static int mtr_get_pages(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
+			 dma_addr_t *pages, int count, int page_shift)
+{
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	int npage;
+	int err;
+
+	if (mtr->umem)
+		npage = hns_roce_get_umem_bufs(hr_dev, pages, count, 0,
+					       mtr->umem, page_shift);
+	else
+		npage = hns_roce_get_kmem_bufs(hr_dev, pages, count, 0,
+					       mtr->kmem);
+
+	if (mtr->hem_cfg.is_direct && npage > 1) {
+		err = mtr_check_direct_pages(pages, npage, page_shift);
+		if (err) {
+			ibdev_err(ibdev, "Failed to check %s direct page-%d\n",
+				  mtr->umem ? "user" : "kernel", err);
+			npage = err;
+		}
+	}
+
+	return npage;
+}
+
+int hns_roce_mtr_map(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
+		     struct hns_roce_buf_region *regions, int region_cnt,
+		     dma_addr_t *pages, int page_cnt)
+{
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	struct hns_roce_buf_region *r;
+	int err;
+	int i;
+
+	for (i = 0; i < region_cnt; i++) {
+		r = &regions[i];
+		if (r->offset + r->count > page_cnt) {
+			err = -EINVAL;
+			ibdev_err(ibdev,
+				  "Failed to check mtr%d end %d + %d, max %d\n",
+				  i, r->offset, r->count, page_cnt);
+			return err;
+		}
+
+		err = mtr_map_region(hr_dev, mtr, &pages[r->offset], r);
+		if (err) {
+			ibdev_err(ibdev,
+				  "Failed to map mtr%d offset %d, err %d\n",
+				  i, r->offset, err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
 int hns_roce_mtr_find(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
 		      int offset, u64 *mtt_buf, int mtt_max, u64 *base_addr)
 {
-	u64 *mtts = mtt_buf;
 	int mtt_count;
 	int total = 0;
-	u64 *addr;
+	__le64 *mtts;
 	int npage;
+	u64 addr;
 	int left;
 
-	if (mtts == NULL || mtt_max < 1)
+	if (!mtt_buf || mtt_max < 1)
 		goto done;
 
+	/* no mtt memory in direct mode, so just return the buffer address */
+	if (mtr->hem_cfg.is_direct) {
+		npage = offset;
+		for (total = 0; total < mtt_max; total++, npage++) {
+			addr = mtr->hem_cfg.root_ba +
+			       (npage << mtr->hem_cfg.buf_pg_shift);
+
+			if (hr_dev->hw_rev == HNS_ROCE_HW_VER1)
+				mtt_buf[total] = to_hr_hw_page_addr(addr);
+			else
+				mtt_buf[total] = addr;
+		}
+
+		goto done;
+	}
+
 	left = mtt_max;
 	while (left > 0) {
 		mtt_count = 0;
-		addr = hns_roce_hem_list_find_mtt(hr_dev, &mtr->hem_list,
+		mtts = hns_roce_hem_list_find_mtt(hr_dev, &mtr->hem_list,
 						  offset + total,
 						  &mtt_count, NULL);
-		if (!addr || !mtt_count)
+		if (!mtts || !mtt_count)
 			goto done;
 
 		npage = min(mtt_count, left);
-		memcpy(&mtts[total], addr, BA_BYTE_LEN * npage);
 		left -= npage;
-		total += npage;
+		for (mtt_count = 0; mtt_count < npage; mtt_count++)
+			mtt_buf[total++] = le64_to_cpu(mtts[mtt_count]);
 	}
 
 done:
 	if (base_addr)
-		*base_addr = mtr->hem_list.root_ba;
+		*base_addr = mtr->hem_cfg.root_ba;
 
 	return total;
 }
+
+/* convert buffer size to page index and page count */
+static int mtr_init_region(struct hns_roce_buf_attr *attr, int page_cnt,
+			   struct hns_roce_buf_region *regions, int region_cnt,
+			   int page_shift)
+{
+	unsigned int page_size = 1 << page_shift;
+	int max_region = attr->region_count;
+	struct hns_roce_buf_region *r;
+	int page_idx = 0;
+	int i = 0;
+
+	for (; i < region_cnt && i < max_region && page_idx < page_cnt; i++) {
+		r = &regions[i];
+		r->hopnum = attr->region[i].hopnum == HNS_ROCE_HOP_NUM_0 ?
+			    0 : attr->region[i].hopnum;
+		r->offset = page_idx;
+		r->count = DIV_ROUND_UP(attr->region[i].size, page_size);
+		page_idx += r->count;
+	}
+
+	return i;
+}
+
+/**
+ * hns_roce_mtr_create - Create hns memory translate region.
+ *
+ * @mtr: memory translate region
+ * @init_attr: init attribute for creating mtr
+ * @page_shift: page shift for multi-hop base address table
+ * @udata: user space context, if it's NULL, means kernel space
+ * @user_addr: userspace virtual address to start at
+ * @buf_alloced: mtr has private buffer, true means need to alloc
+ */
+int hns_roce_mtr_create(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
+			struct hns_roce_buf_attr *buf_attr, int page_shift,
+			struct ib_udata *udata, unsigned long user_addr)
+{
+	struct hns_roce_buf_region regions[HNS_ROCE_MAX_BT_REGION] = {};
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	dma_addr_t *pages = NULL;
+	int region_cnt = 0;
+	int all_pg_cnt;
+	int get_pg_cnt;
+	bool has_mtt;
+	int err = 0;
+
+	has_mtt = mtr_has_mtt(buf_attr);
+	/* if buffer only need mtt, just init the hem cfg */
+	if (buf_attr->mtt_only) {
+		mtr->hem_cfg.buf_pg_shift = buf_attr->page_shift;
+		mtr->hem_cfg.buf_pg_count = mtr_bufs_size(buf_attr) >>
+					    buf_attr->page_shift;
+		mtr->umem = NULL;
+		mtr->kmem = NULL;
+	} else {
+		err = mtr_alloc_bufs(hr_dev, mtr, buf_attr, !has_mtt, udata,
+				     user_addr);
+		if (err) {
+			ibdev_err(ibdev, "Failed to alloc mtr bufs, err %d\n",
+				  err);
+			return err;
+		}
+	}
+
+	/* alloc mtt memory */
+	all_pg_cnt = mtr->hem_cfg.buf_pg_count;
+	hns_roce_hem_list_init(&mtr->hem_list);
+	mtr->hem_cfg.is_direct = !has_mtt;
+	mtr->hem_cfg.ba_pg_shift = page_shift;
+	if (has_mtt) {
+		region_cnt = mtr_init_region(buf_attr, all_pg_cnt,
+					     regions, ARRAY_SIZE(regions),
+					     mtr->hem_cfg.buf_pg_shift);
+		if (region_cnt < 1) {
+			err = -ENOBUFS;
+			ibdev_err(ibdev, "Failed to init mtr region %d\n",
+				  region_cnt);
+			goto err_alloc_bufs;
+		}
+		err = hns_roce_hem_list_request(hr_dev, &mtr->hem_list,
+						regions, region_cnt,
+						page_shift);
+		if (err) {
+			ibdev_err(ibdev, "Failed to request mtr hem, err %d\n",
+				  err);
+			goto err_alloc_bufs;
+		}
+		mtr->hem_cfg.root_ba = mtr->hem_list.root_ba;
+	}
+
+	/* no buffer to map */
+	if (buf_attr->mtt_only)
+		return 0;
+
+	/* alloc a tmp array to store buffer's dma address */
+	pages = kvcalloc(all_pg_cnt, sizeof(dma_addr_t), GFP_KERNEL);
+	if (!pages) {
+		err = -ENOMEM;
+		ibdev_err(ibdev, "Failed to alloc mtr page list %d\n",
+			  all_pg_cnt);
+		goto err_alloc_hem_list;
+	}
+
+	get_pg_cnt = mtr_get_pages(hr_dev, mtr, pages, all_pg_cnt,
+				   mtr->hem_cfg.buf_pg_shift);
+	if (get_pg_cnt != all_pg_cnt) {
+		ibdev_err(ibdev, "Failed to get mtr page %d != %d\n",
+			  get_pg_cnt, all_pg_cnt);
+		err = -ENOBUFS;
+		goto err_alloc_page_list;
+	}
+
+	if (!has_mtt) {
+		mtr->hem_cfg.root_ba = pages[0];
+	} else {
+		/* write buffer's dma address to BA table */
+		err = hns_roce_mtr_map(hr_dev, mtr, regions, region_cnt, pages,
+				       all_pg_cnt);
+		if (err) {
+			ibdev_err(ibdev, "Failed to map mtr pages, err %d\n",
+				  err);
+			goto err_alloc_page_list;
+		}
+	}
+
+	/* drop tmp array */
+	kvfree(pages);
+	return 0;
+err_alloc_page_list:
+	kvfree(pages);
+err_alloc_hem_list:
+	hns_roce_hem_list_release(hr_dev, &mtr->hem_list);
+err_alloc_bufs:
+	mtr_free_bufs(hr_dev, mtr);
+	return err;
+}
+
+void hns_roce_mtr_destroy(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr)
+{
+	/* release multi-hop addressing resource */
+	hns_roce_hem_list_release(hr_dev, &mtr->hem_list);
+
+	/* free buffers */
+	mtr_free_bufs(hr_dev, mtr);
+}
diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c
index 6317901c4b4f..d05d3cb7de39 100644
--- a/drivers/infiniband/hw/hns/hns_roce_qp.c
+++ b/drivers/infiniband/hw/hns/hns_roce_qp.c
@@ -512,63 +512,57 @@ static int set_user_sq_size(struct hns_roce_dev *hr_dev,
 
 static int split_wqe_buf_region(struct hns_roce_dev *hr_dev,
 				struct hns_roce_qp *hr_qp,
-				struct hns_roce_buf_region *regions,
-				int region_max, int page_shift)
+				struct hns_roce_buf_attr *buf_attr)
 {
-	int page_size = 1 << page_shift;
 	bool is_extend_sge;
-	int region_cnt = 0;
 	int buf_size;
-	int buf_cnt;
+	int idx = 0;
 
-	if (hr_qp->buff_size < 1 || region_max < 1)
-		return region_cnt;
+	if (hr_qp->buff_size < 1)
+		return -EINVAL;
+
+	buf_attr->page_shift = PAGE_ADDR_SHIFT + hr_dev->caps.mtt_buf_pg_sz;
+	buf_attr->fixed_page = true;
+	buf_attr->region_count = 0;
 
 	if (hr_qp->sge.sge_cnt > 0)
 		is_extend_sge = true;
 	else
 		is_extend_sge = false;
 
-	/* sq region */
+	/* SQ WQE */
 	if (is_extend_sge)
 		buf_size = hr_qp->sge.offset - hr_qp->sq.offset;
 	else
 		buf_size = hr_qp->rq.offset - hr_qp->sq.offset;
 
-	if (buf_size > 0 && region_cnt < region_max) {
-		buf_cnt = DIV_ROUND_UP(buf_size, page_size);
-		hns_roce_init_buf_region(&regions[region_cnt],
-					 hr_dev->caps.wqe_sq_hop_num,
-					 hr_qp->sq.offset / page_size,
-					 buf_cnt);
-		region_cnt++;
+	if (buf_size > 0 && idx < ARRAY_SIZE(buf_attr->region)) {
+		buf_attr->region[idx].size = buf_size;
+		buf_attr->region[idx].hopnum = hr_dev->caps.wqe_sq_hop_num;
+		idx++;
 	}
 
-	/* sge region */
-	if (is_extend_sge) {
-		buf_size = hr_qp->rq.offset - hr_qp->sge.offset;
-		if (buf_size > 0 && region_cnt < region_max) {
-			buf_cnt = DIV_ROUND_UP(buf_size, page_size);
-			hns_roce_init_buf_region(&regions[region_cnt],
-						 hr_dev->caps.wqe_sge_hop_num,
-						 hr_qp->sge.offset / page_size,
-						 buf_cnt);
-			region_cnt++;
-		}
+	/* extend SGE in SQ WQE */
+	buf_size = hr_qp->rq.offset - hr_qp->sge.offset;
+	if (buf_size > 0 && is_extend_sge &&
+	    idx < ARRAY_SIZE(buf_attr->region)) {
+		buf_attr->region[idx].size = buf_size;
+		buf_attr->region[idx].hopnum =
+					hr_dev->caps.wqe_sge_hop_num;
+		idx++;
 	}
 
-	/* rq region */
+	/* RQ WQE */
 	buf_size = hr_qp->buff_size - hr_qp->rq.offset;
-	if (buf_size > 0) {
-		buf_cnt = DIV_ROUND_UP(buf_size, page_size);
-		hns_roce_init_buf_region(&regions[region_cnt],
-					 hr_dev->caps.wqe_rq_hop_num,
-					 hr_qp->rq.offset / page_size,
-					 buf_cnt);
-		region_cnt++;
+	if (buf_size > 0 && idx < ARRAY_SIZE(buf_attr->region)) {
+		buf_attr->region[idx].size = buf_size;
+		buf_attr->region[idx].hopnum = hr_dev->caps.wqe_rq_hop_num;
+		idx++;
 	}
 
-	return region_cnt;
+	buf_attr->region_count = idx;
+
+	return 0;
 }
 
 static int set_extend_sge_param(struct hns_roce_dev *hr_dev,
@@ -731,72 +725,12 @@ static void free_rq_inline_buf(struct hns_roce_qp *hr_qp)
 	kfree(hr_qp->rq_inl_buf.wqe_list);
 }
 
-static int map_wqe_buf(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp,
-		       u32 page_shift, bool is_user)
-{
-/* WQE buffer include 3 parts: SQ, extend SGE and RQ. */
-#define HNS_ROCE_WQE_REGION_MAX	 3
-	struct hns_roce_buf_region regions[HNS_ROCE_WQE_REGION_MAX] = {};
-	dma_addr_t *buf_list[HNS_ROCE_WQE_REGION_MAX] = {};
-	struct ib_device *ibdev = &hr_dev->ib_dev;
-	struct hns_roce_buf_region *r;
-	int region_count;
-	int buf_count;
-	int ret;
-	int i;
-
-	region_count = split_wqe_buf_region(hr_dev, hr_qp, regions,
-					    ARRAY_SIZE(regions), page_shift);
-
-	/* alloc a tmp list to store WQE buffers address */
-	ret = hns_roce_alloc_buf_list(regions, buf_list, region_count);
-	if (ret) {
-		ibdev_err(ibdev, "Failed to alloc WQE buffer list\n");
-		return ret;
-	}
-
-	for (i = 0; i < region_count; i++) {
-		r = &regions[i];
-		if (is_user)
-			buf_count = hns_roce_get_umem_bufs(hr_dev, buf_list[i],
-					r->count, r->offset, hr_qp->umem,
-					page_shift);
-		else
-			buf_count = hns_roce_get_kmem_bufs(hr_dev, buf_list[i],
-					r->count, r->offset, &hr_qp->hr_buf);
-
-		if (buf_count != r->count) {
-			ibdev_err(ibdev, "Failed to get %s WQE buf, expect %d = %d.\n",
-				  is_user ? "user" : "kernel",
-				  r->count, buf_count);
-			ret = -ENOBUFS;
-			goto done;
-		}
-	}
-
-	hr_qp->wqe_bt_pg_shift = hr_dev->caps.mtt_ba_pg_sz;
-	hns_roce_mtr_init(&hr_qp->mtr, PAGE_SHIFT + hr_qp->wqe_bt_pg_shift,
-			  page_shift);
-	ret = hns_roce_mtr_attach(hr_dev, &hr_qp->mtr, buf_list, regions,
-				  region_count);
-	if (ret)
-		ibdev_err(ibdev, "Failed to attach WQE's mtr\n");
-
-	goto done;
-
-	hns_roce_mtr_cleanup(hr_dev, &hr_qp->mtr);
-done:
-	hns_roce_free_buf_list(buf_list, region_count);
-
-	return ret;
-}
-
 static int alloc_qp_buf(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp,
 			struct ib_qp_init_attr *init_attr,
 			struct ib_udata *udata, unsigned long addr)
 {
-	u32 page_shift = PAGE_SHIFT + hr_dev->caps.mtt_buf_pg_sz;
 	struct ib_device *ibdev = &hr_dev->ib_dev;
+	struct hns_roce_buf_attr buf_attr = {};
 	bool is_rq_buf_inline;
 	int ret;
 
@@ -810,54 +744,30 @@ static int alloc_qp_buf(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp,
 		}
 	}
 
-	if (udata) {
-		hr_qp->umem = ib_umem_get(ibdev, addr, hr_qp->buff_size, 0);
-		if (IS_ERR(hr_qp->umem)) {
-			ret = PTR_ERR(hr_qp->umem);
-			goto err_inline;
-		}
-	} else {
-		ret = hns_roce_buf_alloc(hr_dev, hr_qp->buff_size,
-					 (1 << page_shift) * 2,
-					 &hr_qp->hr_buf, page_shift);
-		if (ret)
-			goto err_inline;
+	ret = split_wqe_buf_region(hr_dev, hr_qp, &buf_attr);
+	if (ret) {
+		ibdev_err(ibdev, "Failed to split WQE buf, ret %d\n", ret);
+		goto err_inline;
+	}
+	ret = hns_roce_mtr_create(hr_dev, &hr_qp->mtr, &buf_attr,
+				  PAGE_ADDR_SHIFT + hr_dev->caps.mtt_ba_pg_sz,
+				  udata, addr);
+	if (ret) {
+		ibdev_err(ibdev, "Failed to create WQE mtr, ret %d\n", ret);
+		goto err_inline;
 	}
-
-	ret = map_wqe_buf(hr_dev, hr_qp, page_shift, udata);
-	if (ret)
-		goto err_alloc;
 
 	return 0;
-
 err_inline:
 	if (is_rq_buf_inline)
 		free_rq_inline_buf(hr_qp);
 
-err_alloc:
-	if (udata) {
-		ib_umem_release(hr_qp->umem);
-		hr_qp->umem = NULL;
-	} else {
-		hns_roce_buf_free(hr_dev, hr_qp->buff_size, &hr_qp->hr_buf);
-	}
-
-	ibdev_err(ibdev, "Failed to alloc WQE buffer, ret %d.\n", ret);
-
 	return ret;
 }
 
 static void free_qp_buf(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp)
 {
-	hns_roce_mtr_cleanup(hr_dev, &hr_qp->mtr);
-	if (hr_qp->umem) {
-		ib_umem_release(hr_qp->umem);
-		hr_qp->umem = NULL;
-	}
-
-	if (hr_qp->hr_buf.nbufs > 0)
-		hns_roce_buf_free(hr_dev, hr_qp->buff_size, &hr_qp->hr_buf);
-
+	hns_roce_mtr_destroy(hr_dev, &hr_qp->mtr);
 	if ((hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_RQ_INLINE) &&
 	     hr_qp->rq.wqe_cnt)
 		free_rq_inline_buf(hr_qp);
@@ -1431,10 +1341,9 @@ void hns_roce_unlock_cqs(struct hns_roce_cq *send_cq,
 	}
 }
 
-static void *get_wqe(struct hns_roce_qp *hr_qp, int offset)
+static inline void *get_wqe(struct hns_roce_qp *hr_qp, int offset)
 {
-
-	return hns_roce_buf_offset(&hr_qp->hr_buf, offset);
+	return hns_roce_buf_offset(hr_qp->mtr.kmem, offset);
 }
 
 void *hns_roce_get_recv_wqe(struct hns_roce_qp *hr_qp, int n)
@@ -1449,8 +1358,7 @@ void *hns_roce_get_send_wqe(struct hns_roce_qp *hr_qp, int n)
 
 void *hns_roce_get_extend_sge(struct hns_roce_qp *hr_qp, int n)
 {
-	return hns_roce_buf_offset(&hr_qp->hr_buf, hr_qp->sge.offset +
-					(n << hr_qp->sge.sge_shift));
+	return get_wqe(hr_qp, hr_qp->sge.offset + (n << hr_qp->sge.sge_shift));
 }
 
 bool hns_roce_wq_overflow(struct hns_roce_wq *hr_wq, int nreq,
diff --git a/drivers/infiniband/hw/hns/hns_roce_srq.c b/drivers/infiniband/hw/hns/hns_roce_srq.c
index 5b3dd1a337d4..e413a9737ae6 100644
--- a/drivers/infiniband/hw/hns/hns_roce_srq.c
+++ b/drivers/infiniband/hw/hns/hns_roce_srq.c
@@ -77,56 +77,56 @@ static int hns_roce_hw_destroy_srq(struct hns_roce_dev *dev,
 				 HNS_ROCE_CMD_TIMEOUT_MSECS);
 }
 
-static int hns_roce_srq_alloc(struct hns_roce_dev *hr_dev, u32 pdn, u32 cqn,
-			      u16 xrcd, struct hns_roce_mtt *hr_mtt,
-			      u64 db_rec_addr, struct hns_roce_srq *srq)
+static int alloc_srqc(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq,
+		      u32 pdn, u32 cqn, u16 xrcd, u64 db_rec_addr)
 {
 	struct hns_roce_srq_table *srq_table = &hr_dev->srq_table;
+	struct ib_device *ibdev = &hr_dev->ib_dev;
 	struct hns_roce_cmd_mailbox *mailbox;
-	dma_addr_t dma_handle_wqe;
-	dma_addr_t dma_handle_idx;
-	u64 *mtts_wqe;
-	u64 *mtts_idx;
+	u64 mtts_wqe[MTT_MIN_COUNT] = { 0 };
+	u64 mtts_idx[MTT_MIN_COUNT] = { 0 };
+	dma_addr_t dma_handle_wqe = 0;
+	dma_addr_t dma_handle_idx = 0;
 	int ret;
 
 	/* Get the physical address of srq buf */
-	mtts_wqe = hns_roce_table_find(hr_dev,
-				       &hr_dev->mr_table.mtt_srqwqe_table,
-				       srq->mtt.first_seg,
-				       &dma_handle_wqe);
-	if (!mtts_wqe) {
-		dev_err(hr_dev->dev, "Failed to find mtt for srq buf.\n");
-		return -EINVAL;
+	ret = hns_roce_mtr_find(hr_dev, &srq->buf_mtr, 0, mtts_wqe,
+				ARRAY_SIZE(mtts_wqe), &dma_handle_wqe);
+	if (ret < 1) {
+		ibdev_err(ibdev, "Failed to find mtr for SRQ WQE\n");
+		return -ENOBUFS;
 	}
 
 	/* Get physical address of idx que buf */
-	mtts_idx = hns_roce_table_find(hr_dev, &hr_dev->mr_table.mtt_idx_table,
-				       srq->idx_que.mtt.first_seg,
-				       &dma_handle_idx);
-	if (!mtts_idx) {
-		dev_err(hr_dev->dev,
-			"Failed to find mtt for srq idx queue buf.\n");
-		return -EINVAL;
+	ret = hns_roce_mtr_find(hr_dev, &srq->idx_que.mtr, 0, mtts_idx,
+				ARRAY_SIZE(mtts_idx), &dma_handle_idx);
+	if (ret < 1) {
+		ibdev_err(ibdev, "Failed to find mtr for SRQ idx\n");
+		return -ENOBUFS;
 	}
 
 	ret = hns_roce_bitmap_alloc(&srq_table->bitmap, &srq->srqn);
 	if (ret) {
-		dev_err(hr_dev->dev,
-			"Failed to alloc a bit from srq bitmap.\n");
+		ibdev_err(ibdev, "Failed to alloc SRQ number, err %d\n", ret);
 		return -ENOMEM;
 	}
 
 	ret = hns_roce_table_get(hr_dev, &srq_table->table, srq->srqn);
-	if (ret)
+	if (ret) {
+		ibdev_err(ibdev, "Failed to get SRQC table, err %d\n", ret);
 		goto err_out;
+	}
 
 	ret = xa_err(xa_store(&srq_table->xa, srq->srqn, srq, GFP_KERNEL));
-	if (ret)
+	if (ret) {
+		ibdev_err(ibdev, "Failed to store SRQC, err %d\n", ret);
 		goto err_put;
+	}
 
 	mailbox = hns_roce_alloc_cmd_mailbox(hr_dev);
-	if (IS_ERR(mailbox)) {
-		ret = PTR_ERR(mailbox);
+	if (IS_ERR_OR_NULL(mailbox)) {
+		ret = -ENOMEM;
+		ibdev_err(ibdev, "Failed to alloc mailbox for SRQC\n");
 		goto err_xa;
 	}
 
@@ -136,8 +136,10 @@ static int hns_roce_srq_alloc(struct hns_roce_dev *hr_dev, u32 pdn, u32 cqn,
 
 	ret = hns_roce_hw_create_srq(hr_dev, mailbox, srq->srqn);
 	hns_roce_free_cmd_mailbox(hr_dev, mailbox);
-	if (ret)
+	if (ret) {
+		ibdev_err(ibdev, "Failed to config SRQC, err %d\n", ret);
 		goto err_xa;
+	}
 
 	atomic_set(&srq->refcount, 1);
 	init_completion(&srq->free);
@@ -154,8 +156,7 @@ static int hns_roce_srq_alloc(struct hns_roce_dev *hr_dev, u32 pdn, u32 cqn,
 	return ret;
 }
 
-static void hns_roce_srq_free(struct hns_roce_dev *hr_dev,
-			      struct hns_roce_srq *srq)
+static void free_srqc(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq)
 {
 	struct hns_roce_srq_table *srq_table = &hr_dev->srq_table;
 	int ret;
@@ -175,187 +176,104 @@ static void hns_roce_srq_free(struct hns_roce_dev *hr_dev,
 	hns_roce_bitmap_free(&srq_table->bitmap, srq->srqn, BITMAP_NO_RR);
 }
 
-static int create_user_srq(struct hns_roce_srq *srq, struct ib_udata *udata,
-			   int srq_buf_size)
+static int alloc_srq_buf(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq,
+			 struct ib_udata *udata, unsigned long addr)
 {
-	struct hns_roce_dev *hr_dev = to_hr_dev(srq->ibsrq.device);
-	struct hns_roce_ib_create_srq  ucmd;
-	struct hns_roce_buf *buf;
-	int ret;
-
-	if (ib_copy_from_udata(&ucmd, udata, sizeof(ucmd)))
-		return -EFAULT;
-
-	srq->umem =
-		ib_umem_get(srq->ibsrq.device, ucmd.buf_addr, srq_buf_size, 0);
-	if (IS_ERR(srq->umem))
-		return PTR_ERR(srq->umem);
-
-	buf = &srq->buf;
-	buf->npages = (ib_umem_page_count(srq->umem) +
-		       (1 << hr_dev->caps.srqwqe_buf_pg_sz) - 1) /
-		      (1 << hr_dev->caps.srqwqe_buf_pg_sz);
-	buf->page_shift = PAGE_SHIFT + hr_dev->caps.srqwqe_buf_pg_sz;
-	ret = hns_roce_mtt_init(hr_dev, buf->npages, buf->page_shift,
-				&srq->mtt);
-	if (ret)
-		goto err_user_buf;
-
-	ret = hns_roce_ib_umem_write_mtt(hr_dev, &srq->mtt, srq->umem);
-	if (ret)
-		goto err_user_srq_mtt;
-
-	/* config index queue BA */
-	srq->idx_que.umem = ib_umem_get(srq->ibsrq.device, ucmd.que_addr,
-					srq->idx_que.buf_size, 0);
-	if (IS_ERR(srq->idx_que.umem)) {
-		dev_err(hr_dev->dev, "ib_umem_get error for index queue\n");
-		ret = PTR_ERR(srq->idx_que.umem);
-		goto err_user_srq_mtt;
-	}
-
-	buf = &srq->idx_que.idx_buf;
-	buf->npages = DIV_ROUND_UP(ib_umem_page_count(srq->idx_que.umem),
-				   1 << hr_dev->caps.idx_buf_pg_sz);
-	buf->page_shift = PAGE_SHIFT + hr_dev->caps.idx_buf_pg_sz;
-	ret = hns_roce_mtt_init(hr_dev, buf->npages, buf->page_shift,
-				&srq->idx_que.mtt);
-	if (ret) {
-		dev_err(hr_dev->dev, "hns_roce_mtt_init error for idx que\n");
-		goto err_user_idx_mtt;
-	}
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	struct hns_roce_buf_attr buf_attr = {};
+	int sge_size;
+	int err;
 
-	ret = hns_roce_ib_umem_write_mtt(hr_dev, &srq->idx_que.mtt,
-					 srq->idx_que.umem);
-	if (ret) {
-		dev_err(hr_dev->dev,
-			"hns_roce_ib_umem_write_mtt error for idx que\n");
-		goto err_user_idx_buf;
-	}
-
-	return 0;
+	sge_size = roundup_pow_of_two(max(HNS_ROCE_SGE_SIZE,
+					  HNS_ROCE_SGE_SIZE * srq->max_gs));
 
-err_user_idx_buf:
-	hns_roce_mtt_cleanup(hr_dev, &srq->idx_que.mtt);
+	srq->wqe_shift = ilog2(sge_size);
 
-err_user_idx_mtt:
-	ib_umem_release(srq->idx_que.umem);
+	buf_attr.page_shift = hr_dev->caps.srqwqe_buf_pg_sz + PAGE_ADDR_SHIFT;
+	buf_attr.region[0].size = srq->wqe_cnt * sge_size;
+	buf_attr.region[0].hopnum = hr_dev->caps.srqwqe_hop_num;
+	buf_attr.region_count = 1;
+	buf_attr.fixed_page = true;
 
-err_user_srq_mtt:
-	hns_roce_mtt_cleanup(hr_dev, &srq->mtt);
+	err = hns_roce_mtr_create(hr_dev, &srq->buf_mtr, &buf_attr,
+				  hr_dev->caps.srqwqe_ba_pg_sz +
+				  PAGE_ADDR_SHIFT, udata, addr);
+	if (err)
+		ibdev_err(ibdev, "Failed to alloc SRQ buf mtr, err %d\n", err);
 
-err_user_buf:
-	ib_umem_release(srq->umem);
+	return err;
+}
 
-	return ret;
+static void free_srq_buf(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq)
+{
+	hns_roce_mtr_destroy(hr_dev, &srq->buf_mtr);
 }
 
-static int hns_roce_create_idx_que(struct ib_pd *pd, struct hns_roce_srq *srq,
-				   u32 page_shift)
+static int alloc_srq_idx(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq,
+			 struct ib_udata *udata, unsigned long addr)
 {
-	struct hns_roce_dev *hr_dev = to_hr_dev(pd->device);
 	struct hns_roce_idx_que *idx_que = &srq->idx_que;
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	struct hns_roce_buf_attr buf_attr = {};
+	int err;
 
-	idx_que->bitmap = bitmap_zalloc(srq->wqe_cnt, GFP_KERNEL);
-	if (!idx_que->bitmap)
-		return -ENOMEM;
+	srq->idx_que.entry_sz = HNS_ROCE_IDX_QUE_ENTRY_SZ;
 
-	idx_que->buf_size = srq->idx_que.buf_size;
+	buf_attr.page_shift = hr_dev->caps.idx_buf_pg_sz + PAGE_ADDR_SHIFT;
+	buf_attr.region[0].size = srq->wqe_cnt * HNS_ROCE_IDX_QUE_ENTRY_SZ;
+	buf_attr.region[0].hopnum = hr_dev->caps.idx_hop_num;
+	buf_attr.region_count = 1;
+	buf_attr.fixed_page = true;
+
+	err = hns_roce_mtr_create(hr_dev, &idx_que->mtr, &buf_attr,
+				  hr_dev->caps.idx_ba_pg_sz + PAGE_ADDR_SHIFT,
+				  udata, addr);
+	if (err) {
+		ibdev_err(ibdev, "Failed to alloc SRQ idx mtr, err %d\n", err);
+		return err;
+	}
+
+	if (!udata) {
+		idx_que->bitmap = bitmap_zalloc(srq->wqe_cnt, GFP_KERNEL);
+		if (!idx_que->bitmap) {
+			ibdev_err(ibdev, "Failed to alloc SRQ idx bitmap\n");
+			err = -ENOMEM;
+			goto err_idx_mtr;
+		}
 
-	if (hns_roce_buf_alloc(hr_dev, idx_que->buf_size, (1 << page_shift) * 2,
-			       &idx_que->idx_buf, page_shift)) {
-		bitmap_free(idx_que->bitmap);
-		return -ENOMEM;
 	}
 
 	return 0;
+err_idx_mtr:
+	hns_roce_mtr_destroy(hr_dev, &idx_que->mtr);
+
+	return err;
 }
 
-static int create_kernel_srq(struct hns_roce_srq *srq, int srq_buf_size)
+static void free_srq_idx(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq)
 {
-	struct hns_roce_dev *hr_dev = to_hr_dev(srq->ibsrq.device);
-	u32 page_shift = PAGE_SHIFT + hr_dev->caps.srqwqe_buf_pg_sz;
-	int ret;
+	struct hns_roce_idx_que *idx_que = &srq->idx_que;
 
-	if (hns_roce_buf_alloc(hr_dev, srq_buf_size, (1 << page_shift) * 2,
-			       &srq->buf, page_shift))
-		return -ENOMEM;
+	bitmap_free(idx_que->bitmap);
+	idx_que->bitmap = NULL;
+	hns_roce_mtr_destroy(hr_dev, &idx_que->mtr);
+}
 
+static int alloc_srq_wrid(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq)
+{
 	srq->head = 0;
 	srq->tail = srq->wqe_cnt - 1;
-
-	ret = hns_roce_mtt_init(hr_dev, srq->buf.npages, srq->buf.page_shift,
-				&srq->mtt);
-	if (ret)
-		goto err_kernel_buf;
-
-	ret = hns_roce_buf_write_mtt(hr_dev, &srq->mtt, &srq->buf);
-	if (ret)
-		goto err_kernel_srq_mtt;
-
-	page_shift = PAGE_SHIFT + hr_dev->caps.idx_buf_pg_sz;
-	ret = hns_roce_create_idx_que(srq->ibsrq.pd, srq, page_shift);
-	if (ret) {
-		dev_err(hr_dev->dev, "Create idx queue fail(%d)!\n", ret);
-		goto err_kernel_srq_mtt;
-	}
-
-	/* Init mtt table for idx_que */
-	ret = hns_roce_mtt_init(hr_dev, srq->idx_que.idx_buf.npages,
-				srq->idx_que.idx_buf.page_shift,
-				&srq->idx_que.mtt);
-	if (ret)
-		goto err_kernel_create_idx;
-
-	/* Write buffer address into the mtt table */
-	ret = hns_roce_buf_write_mtt(hr_dev, &srq->idx_que.mtt,
-				     &srq->idx_que.idx_buf);
-	if (ret)
-		goto err_kernel_idx_buf;
-
 	srq->wrid = kvmalloc_array(srq->wqe_cnt, sizeof(u64), GFP_KERNEL);
-	if (!srq->wrid) {
-		ret = -ENOMEM;
-		goto err_kernel_idx_buf;
-	}
+	if (!srq->wrid)
+		return -ENOMEM;
 
 	return 0;
-
-err_kernel_idx_buf:
-	hns_roce_mtt_cleanup(hr_dev, &srq->idx_que.mtt);
-
-err_kernel_create_idx:
-	hns_roce_buf_free(hr_dev, srq->idx_que.buf_size,
-			  &srq->idx_que.idx_buf);
-	kfree(srq->idx_que.bitmap);
-
-err_kernel_srq_mtt:
-	hns_roce_mtt_cleanup(hr_dev, &srq->mtt);
-
-err_kernel_buf:
-	hns_roce_buf_free(hr_dev, srq_buf_size, &srq->buf);
-
-	return ret;
-}
-
-static void destroy_user_srq(struct hns_roce_dev *hr_dev,
-			     struct hns_roce_srq *srq)
-{
-	hns_roce_mtt_cleanup(hr_dev, &srq->idx_que.mtt);
-	ib_umem_release(srq->idx_que.umem);
-	hns_roce_mtt_cleanup(hr_dev, &srq->mtt);
-	ib_umem_release(srq->umem);
 }
 
-static void destroy_kernel_srq(struct hns_roce_dev *hr_dev,
-			       struct hns_roce_srq *srq, int srq_buf_size)
+static void free_srq_wrid(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq)
 {
-	kvfree(srq->wrid);
-	hns_roce_mtt_cleanup(hr_dev, &srq->idx_que.mtt);
-	hns_roce_buf_free(hr_dev, srq->idx_que.buf_size, &srq->idx_que.idx_buf);
-	kfree(srq->idx_que.bitmap);
-	hns_roce_mtt_cleanup(hr_dev, &srq->mtt);
-	hns_roce_buf_free(hr_dev, srq_buf_size, &srq->buf);
+	kfree(srq->wrid);
+	srq->wrid = NULL;
 }
 
 int hns_roce_create_srq(struct ib_srq *ib_srq,
@@ -365,8 +283,8 @@ int hns_roce_create_srq(struct ib_srq *ib_srq,
 	struct hns_roce_dev *hr_dev = to_hr_dev(ib_srq->device);
 	struct hns_roce_ib_create_srq_resp resp = {};
 	struct hns_roce_srq *srq = to_hr_srq(ib_srq);
-	int srq_desc_size;
-	int srq_buf_size;
+	struct ib_device *ibdev = &hr_dev->ib_dev;
+	struct hns_roce_ib_create_srq ucmd = {};
 	int ret = 0;
 	u32 cqn;
 
@@ -381,41 +299,45 @@ int hns_roce_create_srq(struct ib_srq *ib_srq,
 	srq->wqe_cnt = roundup_pow_of_two(init_attr->attr.max_wr + 1);
 	srq->max_gs = init_attr->attr.max_sge;
 
-	srq_desc_size = roundup_pow_of_two(max(HNS_ROCE_SGE_SIZE,
-					HNS_ROCE_SGE_SIZE * srq->max_gs));
-
-	srq->wqe_shift = ilog2(srq_desc_size);
-
-	srq_buf_size = srq->wqe_cnt * srq_desc_size;
-
-	srq->idx_que.entry_sz = HNS_ROCE_IDX_QUE_ENTRY_SZ;
-	srq->idx_que.buf_size = srq->wqe_cnt * srq->idx_que.entry_sz;
-	srq->mtt.mtt_type = MTT_TYPE_SRQWQE;
-	srq->idx_que.mtt.mtt_type = MTT_TYPE_IDX;
-
 	if (udata) {
-		ret = create_user_srq(srq, udata, srq_buf_size);
+		ret = ib_copy_from_udata(&ucmd, udata, sizeof(ucmd));
 		if (ret) {
-			dev_err(hr_dev->dev, "Create user srq failed\n");
-			goto err_srq;
+			ibdev_err(ibdev, "Failed to copy SRQ udata, err %d\n",
+				  ret);
+			return ret;
 		}
-	} else {
-		ret = create_kernel_srq(srq, srq_buf_size);
+	}
+
+	ret = alloc_srq_buf(hr_dev, srq, udata, ucmd.buf_addr);
+	if (ret) {
+		ibdev_err(ibdev, "Failed to alloc SRQ buffer, err %d\n", ret);
+		return ret;
+	}
+
+	ret = alloc_srq_idx(hr_dev, srq, udata, ucmd.que_addr);
+	if (ret) {
+		ibdev_err(ibdev, "Failed to alloc SRQ idx, err %d\n", ret);
+		goto err_buf_alloc;
+	}
+
+	if (!udata) {
+		ret = alloc_srq_wrid(hr_dev, srq);
 		if (ret) {
-			dev_err(hr_dev->dev, "Create kernel srq failed\n");
-			goto err_srq;
+			ibdev_err(ibdev, "Failed to alloc SRQ wrid, err %d\n",
+				  ret);
+			goto err_idx_alloc;
 		}
 	}
 
 	cqn = ib_srq_has_cq(init_attr->srq_type) ?
 	      to_hr_cq(init_attr->ext.cq)->cqn : 0;
-
 	srq->db_reg_l = hr_dev->reg_base + SRQ_DB_REG;
 
-	ret = hns_roce_srq_alloc(hr_dev, to_hr_pd(ib_srq->pd)->pdn, cqn, 0,
-				 &srq->mtt, 0, srq);
-	if (ret)
-		goto err_wrid;
+	ret = alloc_srqc(hr_dev, srq, to_hr_pd(ib_srq->pd)->pdn, cqn, 0, 0);
+	if (ret) {
+		ibdev_err(ibdev, "Failed to alloc SRQ context, err %d\n", ret);
+		goto err_wrid_alloc;
+	}
 
 	srq->event = hns_roce_ib_srq_event;
 	resp.srqn = srq->srqn;
@@ -431,15 +353,13 @@ int hns_roce_create_srq(struct ib_srq *ib_srq,
 	return 0;
 
 err_srqc_alloc:
-	hns_roce_srq_free(hr_dev, srq);
-
-err_wrid:
-	if (udata)
-		destroy_user_srq(hr_dev, srq);
-	else
-		destroy_kernel_srq(hr_dev, srq, srq_buf_size);
-
-err_srq:
+	free_srqc(hr_dev, srq);
+err_wrid_alloc:
+	free_srq_wrid(hr_dev, srq);
+err_idx_alloc:
+	free_srq_idx(hr_dev, srq);
+err_buf_alloc:
+	free_srq_buf(hr_dev, srq);
 	return ret;
 }
 
@@ -448,18 +368,10 @@ void hns_roce_destroy_srq(struct ib_srq *ibsrq, struct ib_udata *udata)
 	struct hns_roce_dev *hr_dev = to_hr_dev(ibsrq->device);
 	struct hns_roce_srq *srq = to_hr_srq(ibsrq);
 
-	hns_roce_srq_free(hr_dev, srq);
-	hns_roce_mtt_cleanup(hr_dev, &srq->mtt);
-
-	if (udata) {
-		hns_roce_mtt_cleanup(hr_dev, &srq->idx_que.mtt);
-	} else {
-		kvfree(srq->wrid);
-		hns_roce_buf_free(hr_dev, srq->wqe_cnt << srq->wqe_shift,
-				  &srq->buf);
-	}
-	ib_umem_release(srq->idx_que.umem);
-	ib_umem_release(srq->umem);
+	free_srqc(hr_dev, srq);
+	free_srq_idx(hr_dev, srq);
+	free_srq_wrid(hr_dev, srq);
+	free_srq_buf(hr_dev, srq);
 }
 
 int hns_roce_init_srq_table(struct hns_roce_dev *hr_dev)
diff --git a/drivers/infiniband/hw/i40iw/i40iw_ctrl.c b/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
index e8b4b3743661..688f19667221 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
@@ -1046,7 +1046,7 @@ i40iw_sc_query_rdma_features(struct i40iw_sc_cqp *cqp,
 	u64 header;
 
 	wqe = i40iw_sc_cqp_get_next_send_wqe(cqp, scratch);
-	if (wqe)
+	if (!wqe)
 		return I40IW_ERR_RING_FULL;
 
 	set_64bit_val(wqe, 32, feat_mem->pa);
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index a66518a5c938..275722cec8c6 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1499,8 +1499,9 @@ static int __mlx4_ib_create_default_rules(
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(pdefault_rules->rules_create_list); i++) {
+		union ib_flow_spec ib_spec = {};
 		int ret;
-		union ib_flow_spec ib_spec;
+
 		switch (pdefault_rules->rules_create_list[i]) {
 		case 0:
 			/* no rule */
diff --git a/drivers/infiniband/hw/mlx5/Makefile b/drivers/infiniband/hw/mlx5/Makefile
index 2a334800f109..228be05fbaf8 100644
--- a/drivers/infiniband/hw/mlx5/Makefile
+++ b/drivers/infiniband/hw/mlx5/Makefile
@@ -1,11 +1,25 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_MLX5_INFINIBAND)	+= mlx5_ib.o
+obj-$(CONFIG_MLX5_INFINIBAND) += mlx5_ib.o
+
+mlx5_ib-y := ah.o \
+	     cmd.o \
+	     cong.o \
+	     cq.o \
+	     doorbell.o \
+	     gsi.o \
+	     ib_virt.o \
+	     mad.o \
+	     main.o \
+	     mem.o \
+	     mr.o \
+	     qp.o \
+	     qpc.o \
+	     restrack.o \
+	     srq.o \
+	     srq_cmd.o
 
-mlx5_ib-y :=	main.o cq.o doorbell.o qp.o mem.o srq_cmd.o \
-		srq.o mr.o ah.o mad.o gsi.o ib_virt.o cmd.o \
-		cong.o restrack.o
 mlx5_ib-$(CONFIG_INFINIBAND_ON_DEMAND_PAGING) += odp.o
 mlx5_ib-$(CONFIG_MLX5_ESWITCH) += ib_rep.o
-mlx5_ib-$(CONFIG_INFINIBAND_USER_ACCESS) += devx.o
-mlx5_ib-$(CONFIG_INFINIBAND_USER_ACCESS) += flow.o
-mlx5_ib-$(CONFIG_INFINIBAND_USER_ACCESS) += qos.o
+mlx5_ib-$(CONFIG_INFINIBAND_USER_ACCESS) += devx.o \
+					    flow.o \
+					    qos.o
diff --git a/drivers/infiniband/hw/mlx5/cmd.c b/drivers/infiniband/hw/mlx5/cmd.c
index 4c26492ab8a3..a2fcbc49131e 100644
--- a/drivers/infiniband/hw/mlx5/cmd.c
+++ b/drivers/infiniband/hw/mlx5/cmd.c
@@ -327,23 +327,6 @@ int mlx5_cmd_xrcd_dealloc(struct mlx5_core_dev *dev, u32 xrcdn, u16 uid)
 	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
 }
 
-int mlx5_cmd_alloc_q_counter(struct mlx5_core_dev *dev, u16 *counter_id,
-			     u16 uid)
-{
-	u32 in[MLX5_ST_SZ_DW(alloc_q_counter_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(alloc_q_counter_out)] = {0};
-	int err;
-
-	MLX5_SET(alloc_q_counter_in, in, opcode, MLX5_CMD_OP_ALLOC_Q_COUNTER);
-	MLX5_SET(alloc_q_counter_in, in, uid, uid);
-
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-	if (!err)
-		*counter_id = MLX5_GET(alloc_q_counter_out, out,
-				       counter_set_id);
-	return err;
-}
-
 int mlx5_cmd_mad_ifc(struct mlx5_core_dev *dev, const void *inb, void *outb,
 		     u16 opmod, u8 port)
 {
diff --git a/drivers/infiniband/hw/mlx5/cmd.h b/drivers/infiniband/hw/mlx5/cmd.h
index 945ebce73613..43079b18d9b4 100644
--- a/drivers/infiniband/hw/mlx5/cmd.h
+++ b/drivers/infiniband/hw/mlx5/cmd.h
@@ -61,8 +61,6 @@ int mlx5_cmd_detach_mcg(struct mlx5_core_dev *dev, union ib_gid *mgid,
 			u32 qpn, u16 uid);
 int mlx5_cmd_xrcd_alloc(struct mlx5_core_dev *dev, u32 *xrcdn, u16 uid);
 int mlx5_cmd_xrcd_dealloc(struct mlx5_core_dev *dev, u32 xrcdn, u16 uid);
-int mlx5_cmd_alloc_q_counter(struct mlx5_core_dev *dev, u16 *counter_id,
-			     u16 uid);
 int mlx5_cmd_mad_ifc(struct mlx5_core_dev *dev, const void *inb, void *outb,
 		     u16 opmod, u8 port);
 #endif /* MLX5_IB_CMD_H */
diff --git a/drivers/infiniband/hw/mlx5/cq.c b/drivers/infiniband/hw/mlx5/cq.c
index 146ba2966744..0c18cb6a2f14 100644
--- a/drivers/infiniband/hw/mlx5/cq.c
+++ b/drivers/infiniband/hw/mlx5/cq.c
@@ -36,6 +36,7 @@
 #include <rdma/ib_cache.h>
 #include "mlx5_ib.h"
 #include "srq.h"
+#include "qp.h"
 
 static void mlx5_ib_cq_comp(struct mlx5_core_cq *cq, struct mlx5_eqe *eqe)
 {
@@ -201,7 +202,7 @@ static void handle_responder(struct ib_wc *wc, struct mlx5_cqe64 *cqe,
 	case MLX5_CQE_RESP_WR_IMM:
 		wc->opcode	= IB_WC_RECV_RDMA_WITH_IMM;
 		wc->wc_flags	= IB_WC_WITH_IMM;
-		wc->ex.imm_data = cqe->imm_inval_pkey;
+		wc->ex.imm_data = cqe->immediate;
 		break;
 	case MLX5_CQE_RESP_SEND:
 		wc->opcode   = IB_WC_RECV;
@@ -213,12 +214,12 @@ static void handle_responder(struct ib_wc *wc, struct mlx5_cqe64 *cqe,
 	case MLX5_CQE_RESP_SEND_IMM:
 		wc->opcode	= IB_WC_RECV;
 		wc->wc_flags	= IB_WC_WITH_IMM;
-		wc->ex.imm_data = cqe->imm_inval_pkey;
+		wc->ex.imm_data = cqe->immediate;
 		break;
 	case MLX5_CQE_RESP_SEND_INV:
 		wc->opcode	= IB_WC_RECV;
 		wc->wc_flags	= IB_WC_WITH_INVALIDATE;
-		wc->ex.invalidate_rkey = be32_to_cpu(cqe->imm_inval_pkey);
+		wc->ex.invalidate_rkey = be32_to_cpu(cqe->inval_rkey);
 		break;
 	}
 	wc->src_qp	   = be32_to_cpu(cqe->flags_rqpn) & 0xffffff;
@@ -226,7 +227,7 @@ static void handle_responder(struct ib_wc *wc, struct mlx5_cqe64 *cqe,
 	g = (be32_to_cpu(cqe->flags_rqpn) >> 28) & 3;
 	wc->wc_flags |= g ? IB_WC_GRH : 0;
 	if (unlikely(is_qp1(qp->ibqp.qp_type))) {
-		u16 pkey = be32_to_cpu(cqe->imm_inval_pkey) & 0xffff;
+		u16 pkey = be32_to_cpu(cqe->pkey) & 0xffff;
 
 		ib_find_cached_pkey(&dev->ib_dev, qp->port, pkey,
 				    &wc->pkey_index);
@@ -484,7 +485,7 @@ static int mlx5_poll_one(struct mlx5_ib_cq *cq,
 		 * because CQs will be locked while QPs are removed
 		 * from the table.
 		 */
-		mqp = __mlx5_qp_lookup(dev->mdev, qpn);
+		mqp = radix_tree_lookup(&dev->qp_table.tree, qpn);
 		*cur_qp = to_mibqp(mqp);
 	}
 
diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c
index 46e1ab771f10..35b98c2d64d5 100644
--- a/drivers/infiniband/hw/mlx5/devx.c
+++ b/drivers/infiniband/hw/mlx5/devx.c
@@ -14,6 +14,7 @@
 #include <linux/mlx5/driver.h>
 #include <linux/mlx5/fs.h>
 #include "mlx5_ib.h"
+#include "qp.h"
 #include <linux/xarray.h>
 
 #define UVERBS_MODULE_NAME mlx5_ib
@@ -1356,7 +1357,7 @@ static int devx_obj_cleanup(struct ib_uobject *uobject,
 	}
 
 	if (obj->flags & DEVX_OBJ_FLAGS_DCT)
-		ret = mlx5_core_destroy_dct(obj->ib_dev->mdev, &obj->core_dct);
+		ret = mlx5_core_destroy_dct(obj->ib_dev, &obj->core_dct);
 	else if (obj->flags & DEVX_OBJ_FLAGS_CQ)
 		ret = mlx5_core_destroy_cq(obj->ib_dev->mdev, &obj->core_cq);
 	else
@@ -1450,9 +1451,8 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_DEVX_OBJ_CREATE)(
 
 	if (opcode == MLX5_CMD_OP_CREATE_DCT) {
 		obj->flags |= DEVX_OBJ_FLAGS_DCT;
-		err = mlx5_core_create_dct(dev->mdev, &obj->core_dct,
-					   cmd_in, cmd_in_len,
-					   cmd_out, cmd_out_len);
+		err = mlx5_core_create_dct(dev, &obj->core_dct, cmd_in,
+					   cmd_in_len, cmd_out, cmd_out_len);
 	} else if (opcode == MLX5_CMD_OP_CREATE_CQ) {
 		obj->flags |= DEVX_OBJ_FLAGS_CQ;
 		obj->core_cq.comp = devx_cq_comp;
@@ -1499,7 +1499,7 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_DEVX_OBJ_CREATE)(
 
 obj_destroy:
 	if (obj->flags & DEVX_OBJ_FLAGS_DCT)
-		mlx5_core_destroy_dct(obj->ib_dev->mdev, &obj->core_dct);
+		mlx5_core_destroy_dct(obj->ib_dev, &obj->core_dct);
 	else if (obj->flags & DEVX_OBJ_FLAGS_CQ)
 		mlx5_core_destroy_cq(obj->ib_dev->mdev, &obj->core_cq);
 	else
diff --git a/drivers/infiniband/hw/mlx5/flow.c b/drivers/infiniband/hw/mlx5/flow.c
index 862b7bf3e646..69cb7e6e8955 100644
--- a/drivers/infiniband/hw/mlx5/flow.c
+++ b/drivers/infiniband/hw/mlx5/flow.c
@@ -427,7 +427,7 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_FLOW_ACTION_CREATE_MODIFY_HEADER)(
 
 	num_actions = uverbs_attr_ptr_get_array_size(
 		attrs, MLX5_IB_ATTR_CREATE_MODIFY_HEADER_ACTIONS_PRM,
-		MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto));
+		MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto));
 	if (num_actions < 0)
 		return num_actions;
 
@@ -648,7 +648,7 @@ DECLARE_UVERBS_NAMED_METHOD(
 			UA_MANDATORY),
 	UVERBS_ATTR_PTR_IN(MLX5_IB_ATTR_CREATE_MODIFY_HEADER_ACTIONS_PRM,
 			   UVERBS_ATTR_MIN_SIZE(MLX5_UN_SZ_BYTES(
-				   set_action_in_add_action_in_auto)),
+				   set_add_copy_action_in_auto)),
 			   UA_MANDATORY,
 			   UA_ALLOC_AND_COPY),
 	UVERBS_ATTR_CONST_IN(MLX5_IB_ATTR_CREATE_MODIFY_HEADER_FT_TYPE,
diff --git a/drivers/infiniband/hw/mlx5/ib_virt.c b/drivers/infiniband/hw/mlx5/ib_virt.c
index b61165359954..46b2d370fb3f 100644
--- a/drivers/infiniband/hw/mlx5/ib_virt.c
+++ b/drivers/infiniband/hw/mlx5/ib_virt.c
@@ -134,7 +134,7 @@ int mlx5_ib_get_vf_stats(struct ib_device *device, int vf,
 	if (!out)
 		return -ENOMEM;
 
-	err = mlx5_core_query_vport_counter(mdev, true, vf, port, out, out_sz);
+	err = mlx5_core_query_vport_counter(mdev, true, vf, port, out);
 	if (err)
 		goto ex;
 
diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c
index 14e0c17de6a9..454ce5de2de7 100644
--- a/drivers/infiniband/hw/mlx5/mad.c
+++ b/drivers/infiniband/hw/mlx5/mad.c
@@ -30,7 +30,6 @@
  * SOFTWARE.
  */
 
-#include <linux/mlx5/cmd.h>
 #include <linux/mlx5/vport.h>
 #include <rdma/ib_mad.h>
 #include <rdma/ib_smi.h>
@@ -188,8 +187,8 @@ static int process_pma_cmd(struct mlx5_ib_dev *dev, u8 port_num,
 			goto done;
 		}
 
-		err = mlx5_core_query_vport_counter(mdev, 0, 0,
-						    mdev_port_num, out_cnt, sz);
+		err = mlx5_core_query_vport_counter(mdev, 0, 0, mdev_port_num,
+						    out_cnt);
 		if (!err)
 			pma_cnt_ext_assign(pma_cnt_ext, out_cnt);
 	} else {
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 6679756506e6..65e0e24d463b 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -59,6 +59,7 @@
 #include "ib_rep.h"
 #include "cmd.h"
 #include "srq.h"
+#include "qp.h"
 #include <linux/mlx5/fs_helpers.h>
 #include <linux/mlx5/accel.h>
 #include <rdma/uverbs_std_types.h>
@@ -2443,7 +2444,7 @@ static int handle_alloc_dm_sw_icm(struct ib_ucontext *ctx,
 	act_size = roundup_pow_of_two(act_size);
 
 	dm->size = act_size;
-	err = mlx5_dm_sw_icm_alloc(dev, type, act_size,
+	err = mlx5_dm_sw_icm_alloc(dev, type, act_size, attr->alignment,
 				   to_mucontext(ctx)->devx_uid, &dm->dev_addr,
 				   &dm->icm_dm.obj_id);
 	if (err)
@@ -4632,8 +4633,7 @@ static void delay_drop_handler(struct work_struct *work)
 	atomic_inc(&delay_drop->events_cnt);
 
 	mutex_lock(&delay_drop->lock);
-	err = mlx5_core_set_delay_drop(delay_drop->dev->mdev,
-				       delay_drop->timeout);
+	err = mlx5_core_set_delay_drop(delay_drop->dev, delay_drop->timeout);
 	if (err) {
 		mlx5_ib_warn(delay_drop->dev, "Failed to set delay drop, timeout=%u\n",
 			     delay_drop->timeout);
@@ -5439,15 +5439,21 @@ static bool is_mdev_switchdev_mode(const struct mlx5_core_dev *mdev)
 
 static void mlx5_ib_dealloc_counters(struct mlx5_ib_dev *dev)
 {
+	u32 in[MLX5_ST_SZ_DW(dealloc_q_counter_in)] = {};
 	int num_cnt_ports;
 	int i;
 
 	num_cnt_ports = is_mdev_switchdev_mode(dev->mdev) ? 1 : dev->num_ports;
 
+	MLX5_SET(dealloc_q_counter_in, in, opcode,
+		 MLX5_CMD_OP_DEALLOC_Q_COUNTER);
+
 	for (i = 0; i < num_cnt_ports; i++) {
-		if (dev->port[i].cnts.set_id_valid)
-			mlx5_core_dealloc_q_counter(dev->mdev,
-						    dev->port[i].cnts.set_id);
+		if (dev->port[i].cnts.set_id) {
+			MLX5_SET(dealloc_q_counter_in, in, counter_set_id,
+				 dev->port[i].cnts.set_id);
+			mlx5_cmd_exec_in(dev->mdev, dealloc_q_counter, in);
+		}
 		kfree(dev->port[i].cnts.names);
 		kfree(dev->port[i].cnts.offsets);
 	}
@@ -5556,11 +5562,14 @@ static void mlx5_ib_fill_counters(struct mlx5_ib_dev *dev,
 
 static int mlx5_ib_alloc_counters(struct mlx5_ib_dev *dev)
 {
+	u32 out[MLX5_ST_SZ_DW(alloc_q_counter_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(alloc_q_counter_in)] = {};
 	int num_cnt_ports;
 	int err = 0;
 	int i;
 	bool is_shared;
 
+	MLX5_SET(alloc_q_counter_in, in, opcode, MLX5_CMD_OP_ALLOC_Q_COUNTER);
 	is_shared = MLX5_CAP_GEN(dev->mdev, log_max_uctx) != 0;
 	num_cnt_ports = is_mdev_switchdev_mode(dev->mdev) ? 1 : dev->num_ports;
 
@@ -5572,17 +5581,19 @@ static int mlx5_ib_alloc_counters(struct mlx5_ib_dev *dev)
 		mlx5_ib_fill_counters(dev, dev->port[i].cnts.names,
 				      dev->port[i].cnts.offsets);
 
-		err = mlx5_cmd_alloc_q_counter(dev->mdev,
-					       &dev->port[i].cnts.set_id,
-					       is_shared ?
-					       MLX5_SHARED_RESOURCE_UID : 0);
+		MLX5_SET(alloc_q_counter_in, in, uid,
+			 is_shared ? MLX5_SHARED_RESOURCE_UID : 0);
+
+		err = mlx5_cmd_exec_inout(dev->mdev, alloc_q_counter, in, out);
 		if (err) {
 			mlx5_ib_warn(dev,
 				     "couldn't allocate queue counter for port %d, err %d\n",
 				     i + 1, err);
 			goto err_alloc;
 		}
-		dev->port[i].cnts.set_id_valid = true;
+
+		dev->port[i].cnts.set_id =
+			MLX5_GET(alloc_q_counter_out, out, counter_set_id);
 	}
 	return 0;
 
@@ -5638,27 +5649,23 @@ static int mlx5_ib_query_q_counters(struct mlx5_core_dev *mdev,
 				    struct rdma_hw_stats *stats,
 				    u16 set_id)
 {
-	int outlen = MLX5_ST_SZ_BYTES(query_q_counter_out);
-	void *out;
+	u32 out[MLX5_ST_SZ_DW(query_q_counter_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_q_counter_in)] = {};
 	__be32 val;
 	int ret, i;
 
-	out = kvzalloc(outlen, GFP_KERNEL);
-	if (!out)
-		return -ENOMEM;
-
-	ret = mlx5_core_query_q_counter(mdev, set_id, 0, out, outlen);
+	MLX5_SET(query_q_counter_in, in, opcode, MLX5_CMD_OP_QUERY_Q_COUNTER);
+	MLX5_SET(query_q_counter_in, in, counter_set_id, set_id);
+	ret = mlx5_cmd_exec_inout(mdev, query_q_counter, in, out);
 	if (ret)
-		goto free;
+		return ret;
 
 	for (i = 0; i < cnts->num_q_counters; i++) {
-		val = *(__be32 *)(out + cnts->offsets[i]);
+		val = *(__be32 *)((void *)out + cnts->offsets[i]);
 		stats->value[i] = (u64)be32_to_cpu(val);
 	}
 
-free:
-	kvfree(out);
-	return ret;
+	return 0;
 }
 
 static int mlx5_ib_query_ext_ppcnt_counters(struct mlx5_ib_dev *dev,
@@ -5765,20 +5772,38 @@ static int mlx5_ib_counter_update_stats(struct rdma_counter *counter)
 					counter->stats, counter->id);
 }
 
+static int mlx5_ib_counter_dealloc(struct rdma_counter *counter)
+{
+	struct mlx5_ib_dev *dev = to_mdev(counter->device);
+	u32 in[MLX5_ST_SZ_DW(dealloc_q_counter_in)] = {};
+
+	if (!counter->id)
+		return 0;
+
+	MLX5_SET(dealloc_q_counter_in, in, opcode,
+		 MLX5_CMD_OP_DEALLOC_Q_COUNTER);
+	MLX5_SET(dealloc_q_counter_in, in, counter_set_id, counter->id);
+	return mlx5_cmd_exec_in(dev->mdev, dealloc_q_counter, in);
+}
+
 static int mlx5_ib_counter_bind_qp(struct rdma_counter *counter,
 				   struct ib_qp *qp)
 {
 	struct mlx5_ib_dev *dev = to_mdev(qp->device);
-	u16 cnt_set_id = 0;
 	int err;
 
 	if (!counter->id) {
-		err = mlx5_cmd_alloc_q_counter(dev->mdev,
-					       &cnt_set_id,
-					       MLX5_SHARED_RESOURCE_UID);
+		u32 out[MLX5_ST_SZ_DW(alloc_q_counter_out)] = {};
+		u32 in[MLX5_ST_SZ_DW(alloc_q_counter_in)] = {};
+
+		MLX5_SET(alloc_q_counter_in, in, opcode,
+			 MLX5_CMD_OP_ALLOC_Q_COUNTER);
+		MLX5_SET(alloc_q_counter_in, in, uid, MLX5_SHARED_RESOURCE_UID);
+		err = mlx5_cmd_exec_inout(dev->mdev, alloc_q_counter, in, out);
 		if (err)
 			return err;
-		counter->id = cnt_set_id;
+		counter->id =
+			MLX5_GET(alloc_q_counter_out, out, counter_set_id);
 	}
 
 	err = mlx5_ib_qp_set_counter(qp, counter);
@@ -5788,7 +5813,7 @@ static int mlx5_ib_counter_bind_qp(struct rdma_counter *counter,
 	return 0;
 
 fail_set_counter:
-	mlx5_core_dealloc_q_counter(dev->mdev, cnt_set_id);
+	mlx5_ib_counter_dealloc(counter);
 	counter->id = 0;
 
 	return err;
@@ -5799,13 +5824,6 @@ static int mlx5_ib_counter_unbind_qp(struct ib_qp *qp)
 	return mlx5_ib_qp_set_counter(qp, NULL);
 }
 
-static int mlx5_ib_counter_dealloc(struct rdma_counter *counter)
-{
-	struct mlx5_ib_dev *dev = to_mdev(counter->device);
-
-	return mlx5_core_dealloc_q_counter(dev->mdev, counter->id);
-}
-
 static int mlx5_ib_rn_get_params(struct ib_device *device, u8 port_num,
 				 enum rdma_netdev_t type,
 				 struct rdma_netdev_alloc_params *params)
@@ -7175,6 +7193,9 @@ static const struct mlx5_ib_profile pf_profile = {
 	STAGE_CREATE(MLX5_IB_STAGE_ROCE,
 		     mlx5_ib_stage_roce_init,
 		     mlx5_ib_stage_roce_cleanup),
+	STAGE_CREATE(MLX5_IB_STAGE_QP,
+		     mlx5_init_qp_table,
+		     mlx5_cleanup_qp_table),
 	STAGE_CREATE(MLX5_IB_STAGE_SRQ,
 		     mlx5_init_srq_table,
 		     mlx5_cleanup_srq_table),
@@ -7232,6 +7253,9 @@ const struct mlx5_ib_profile raw_eth_profile = {
 	STAGE_CREATE(MLX5_IB_STAGE_ROCE,
 		     mlx5_ib_stage_raw_eth_roce_init,
 		     mlx5_ib_stage_raw_eth_roce_cleanup),
+	STAGE_CREATE(MLX5_IB_STAGE_QP,
+		     mlx5_init_qp_table,
+		     mlx5_cleanup_qp_table),
 	STAGE_CREATE(MLX5_IB_STAGE_SRQ,
 		     mlx5_init_srq_table,
 		     mlx5_cleanup_srq_table),
diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
index a4e522385de0..aaabb8a98eed 100644
--- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
+++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
@@ -780,7 +780,6 @@ struct mlx5_ib_counters {
 	u32 num_cong_counters;
 	u32 num_ext_ppcnt_counters;
 	u16 set_id;
-	bool set_id_valid;
 };
 
 struct mlx5_ib_multiport_info;
@@ -870,6 +869,7 @@ enum mlx5_ib_stages {
 	MLX5_IB_STAGE_CAPS,
 	MLX5_IB_STAGE_NON_DEFAULT_CB,
 	MLX5_IB_STAGE_ROCE,
+	MLX5_IB_STAGE_QP,
 	MLX5_IB_STAGE_SRQ,
 	MLX5_IB_STAGE_DEVICE_RESOURCES,
 	MLX5_IB_STAGE_DEVICE_NOTIFIER,
@@ -1065,6 +1065,7 @@ struct mlx5_ib_dev {
 	struct mlx5_dm		dm;
 	u16			devx_whitelist_uid;
 	struct mlx5_srq_table   srq_table;
+	struct mlx5_qp_table    qp_table;
 	struct mlx5_async_ctx   async_ctx;
 	struct mlx5_devx_event_table devx_event_table;
 	struct mlx5_var_table var_table;
diff --git a/drivers/infiniband/hw/mlx5/odp.c b/drivers/infiniband/hw/mlx5/odp.c
index 3de7606d4a1a..16af1105cfcf 100644
--- a/drivers/infiniband/hw/mlx5/odp.c
+++ b/drivers/infiniband/hw/mlx5/odp.c
@@ -36,6 +36,7 @@
 
 #include "mlx5_ib.h"
 #include "cmd.h"
+#include "qp.h"
 
 #include <linux/mlx5/eq.h>
 
@@ -1219,7 +1220,7 @@ static inline struct mlx5_core_rsc_common *odp_get_rsc(struct mlx5_ib_dev *dev,
 	case MLX5_WQE_PF_TYPE_REQ_SEND_OR_WRITE:
 	case MLX5_WQE_PF_TYPE_RESP:
 	case MLX5_WQE_PF_TYPE_REQ_READ_OR_ATOMIC:
-		common = mlx5_core_res_hold(dev->mdev, wq_num, MLX5_RES_QP);
+		common = mlx5_core_res_hold(dev, wq_num, MLX5_RES_QP);
 		break;
 	default:
 		break;
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 1456db4b6295..d93eec5d3277 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -39,6 +39,7 @@
 #include "mlx5_ib.h"
 #include "ib_rep.h"
 #include "cmd.h"
+#include "qp.h"
 
 /* not supported currently */
 static int wq_signature;
@@ -1254,7 +1255,7 @@ static int create_raw_packet_qp_tis(struct mlx5_ib_dev *dev,
 				    struct mlx5_ib_sq *sq, u32 tdn,
 				    struct ib_pd *pd)
 {
-	u32 in[MLX5_ST_SZ_DW(create_tis_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(create_tis_in)] = {};
 	void *tisc = MLX5_ADDR_OF(create_tis_in, in, ctx);
 
 	MLX5_SET(create_tis_in, in, uid, to_mpd(pd)->uid);
@@ -1262,7 +1263,7 @@ static int create_raw_packet_qp_tis(struct mlx5_ib_dev *dev,
 	if (qp->flags & MLX5_IB_QP_UNDERLAY)
 		MLX5_SET(tisc, tisc, underlay_qpn, qp->underlay_qpn);
 
-	return mlx5_core_create_tis(dev->mdev, in, sizeof(in), &sq->tisn);
+	return mlx5_core_create_tis(dev->mdev, in, &sq->tisn);
 }
 
 static void destroy_raw_packet_qp_tis(struct mlx5_ib_dev *dev,
@@ -1336,7 +1337,7 @@ static int create_raw_packet_qp_sq(struct mlx5_ib_dev *dev,
 	pas = (__be64 *)MLX5_ADDR_OF(wq, wq, pas);
 	mlx5_ib_populate_pas(dev, sq->ubuffer.umem, page_shift, pas, 0);
 
-	err = mlx5_core_create_sq_tracked(dev->mdev, in, inlen, &sq->base.mqp);
+	err = mlx5_core_create_sq_tracked(dev, in, inlen, &sq->base.mqp);
 
 	kvfree(in);
 
@@ -1356,7 +1357,7 @@ static void destroy_raw_packet_qp_sq(struct mlx5_ib_dev *dev,
 				     struct mlx5_ib_sq *sq)
 {
 	destroy_flow_rule_vport_sq(sq);
-	mlx5_core_destroy_sq_tracked(dev->mdev, &sq->base.mqp);
+	mlx5_core_destroy_sq_tracked(dev, &sq->base.mqp);
 	ib_umem_release(sq->ubuffer.umem);
 }
 
@@ -1426,7 +1427,7 @@ static int create_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
 	qp_pas = (__be64 *)MLX5_ADDR_OF(create_qp_in, qpin, pas);
 	memcpy(pas, qp_pas, rq_pas_size);
 
-	err = mlx5_core_create_rq_tracked(dev->mdev, in, inlen, &rq->base.mqp);
+	err = mlx5_core_create_rq_tracked(dev, in, inlen, &rq->base.mqp);
 
 	kvfree(in);
 
@@ -1436,7 +1437,7 @@ static int create_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
 static void destroy_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
 				     struct mlx5_ib_rq *rq)
 {
-	mlx5_core_destroy_rq_tracked(dev->mdev, &rq->base.mqp);
+	mlx5_core_destroy_rq_tracked(dev, &rq->base.mqp);
 }
 
 static bool tunnel_offload_supported(struct mlx5_core_dev *dev)
@@ -1459,9 +1460,8 @@ static void destroy_raw_packet_qp_tir(struct mlx5_ib_dev *dev,
 
 static int create_raw_packet_qp_tir(struct mlx5_ib_dev *dev,
 				    struct mlx5_ib_rq *rq, u32 tdn,
-				    u32 *qp_flags_en,
-				    struct ib_pd *pd,
-				    u32 *out, int outlen)
+				    u32 *qp_flags_en, struct ib_pd *pd,
+				    u32 *out)
 {
 	u8 lb_flag = 0;
 	u32 *in;
@@ -1494,9 +1494,8 @@ static int create_raw_packet_qp_tir(struct mlx5_ib_dev *dev,
 	}
 
 	MLX5_SET(tirc, tirc, self_lb_block, lb_flag);
-
-	err = mlx5_core_create_tir_out(dev->mdev, in, inlen, out, outlen);
-
+	MLX5_SET(create_tir_in, in, opcode, MLX5_CMD_OP_CREATE_TIR);
+	err = mlx5_cmd_exec_inout(dev->mdev, create_tir, in, out);
 	rq->tirn = MLX5_GET(create_tir_out, out, tirn);
 	if (!err && MLX5_GET(tirc, tirc, self_lb_block)) {
 		err = mlx5_ib_enable_lb(dev, false, true);
@@ -1556,9 +1555,8 @@ static int create_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 		if (err)
 			goto err_destroy_sq;
 
-		err = create_raw_packet_qp_tir(
-			dev, rq, tdn, &qp->flags_en, pd, out,
-			MLX5_ST_SZ_BYTES(create_tir_out));
+		err = create_raw_packet_qp_tir(dev, rq, tdn, &qp->flags_en, pd,
+					       out);
 		if (err)
 			goto err_destroy_rq;
 
@@ -1853,7 +1851,8 @@ static int create_rss_raw_qp_tir(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 	MLX5_SET(rx_hash_field_select, hfso, selected_fields, selected_fields);
 
 create_tir:
-	err = mlx5_core_create_tir_out(dev->mdev, in, inlen, out, outlen);
+	MLX5_SET(create_tir_in, in, opcode, MLX5_CMD_OP_CREATE_TIR);
+	err = mlx5_cmd_exec_inout(dev->mdev, create_tir, in, out);
 
 	qp->rss_qp.tirn = MLX5_GET(create_tir_out, out, tirn);
 	if (!err && MLX5_GET(tirc, tirc, self_lb_block)) {
@@ -2347,7 +2346,7 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
 		err = create_raw_packet_qp(dev, qp, in, inlen, pd, udata,
 					   &resp);
 	} else {
-		err = mlx5_core_create_qp(dev->mdev, &base->mqp, in, inlen);
+		err = mlx5_core_create_qp(dev, &base->mqp, in, inlen);
 	}
 
 	if (err) {
@@ -2513,8 +2512,7 @@ static void destroy_qp_common(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 	if (qp->state != IB_QPS_RESET) {
 		if (qp->ibqp.qp_type != IB_QPT_RAW_PACKET &&
 		    !(qp->flags & MLX5_IB_QP_UNDERLAY)) {
-			err = mlx5_core_qp_modify(dev->mdev,
-						  MLX5_CMD_OP_2RST_QP, 0,
+			err = mlx5_core_qp_modify(dev, MLX5_CMD_OP_2RST_QP, 0,
 						  NULL, &base->mqp);
 		} else {
 			struct mlx5_modify_raw_qp_param raw_qp_param = {
@@ -2555,7 +2553,7 @@ static void destroy_qp_common(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 	    qp->flags & MLX5_IB_QP_UNDERLAY) {
 		destroy_raw_packet_qp(dev, qp);
 	} else {
-		err = mlx5_core_destroy_qp(dev->mdev, &base->mqp);
+		err = mlx5_core_destroy_qp(dev, &base->mqp);
 		if (err)
 			mlx5_ib_warn(dev, "failed to destroy QP 0x%x\n",
 				     base->mqp.qpn);
@@ -2818,7 +2816,7 @@ static int mlx5_ib_destroy_dct(struct mlx5_ib_qp *mqp)
 	if (mqp->state == IB_QPS_RTR) {
 		int err;
 
-		err = mlx5_core_destroy_dct(dev->mdev, &mqp->dct.mdct);
+		err = mlx5_core_destroy_dct(dev, &mqp->dct.mdct);
 		if (err) {
 			mlx5_ib_warn(dev, "failed to destroy DCT %d\n", err);
 			return err;
@@ -2933,7 +2931,7 @@ static int modify_raw_packet_eth_prio(struct mlx5_core_dev *dev,
 	tisc = MLX5_ADDR_OF(modify_tis_in, in, ctx);
 	MLX5_SET(tisc, tisc, prio, ((sl & 0x7) << 1));
 
-	err = mlx5_core_modify_tis(dev, sq->tisn, in, inlen);
+	err = mlx5_core_modify_tis(dev, sq->tisn, in);
 
 	kvfree(in);
 
@@ -2960,7 +2958,7 @@ static int modify_raw_packet_tx_affinity(struct mlx5_core_dev *dev,
 	tisc = MLX5_ADDR_OF(modify_tis_in, in, ctx);
 	MLX5_SET(tisc, tisc, lag_tx_port_affinity, tx_affinity);
 
-	err = mlx5_core_modify_tis(dev, sq->tisn, in, inlen);
+	err = mlx5_core_modify_tis(dev, sq->tisn, in);
 
 	kvfree(in);
 
@@ -3240,7 +3238,7 @@ static int modify_raw_packet_qp_rq(
 				"RAW PACKET QP counters are not supported on current FW\n");
 	}
 
-	err = mlx5_core_modify_rq(dev->mdev, rq->base.mqp.qpn, in, inlen);
+	err = mlx5_core_modify_rq(dev->mdev, rq->base.mqp.qpn, in);
 	if (err)
 		goto out;
 
@@ -3303,7 +3301,7 @@ static int modify_raw_packet_qp_sq(
 		MLX5_SET(sqc, sqc, packet_pacing_rate_limit_index, rl_index);
 	}
 
-	err = mlx5_core_modify_sq(dev, sq->base.mqp.qpn, in, inlen);
+	err = mlx5_core_modify_sq(dev, sq->base.mqp.qpn, in);
 	if (err) {
 		/* Remove new rate from table if failed */
 		if (new_rate_added)
@@ -3462,10 +3460,9 @@ static int __mlx5_ib_qp_set_counter(struct ib_qp *qp,
 	base = &mqp->trans_qp.base;
 	context.qp_counter_set_usr_page &= cpu_to_be32(0xffffff);
 	context.qp_counter_set_usr_page |= cpu_to_be32(set_id << 24);
-	return mlx5_core_qp_modify(dev->mdev,
-				   MLX5_CMD_OP_RTS2RTS_QP,
-				   MLX5_QP_OPTPAR_COUNTER_SET_ID,
-				   &context, &base->mqp);
+	return mlx5_core_qp_modify(dev, MLX5_CMD_OP_RTS2RTS_QP,
+				   MLX5_QP_OPTPAR_COUNTER_SET_ID, &context,
+				   &base->mqp);
 }
 
 static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
@@ -3752,8 +3749,7 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
 
 		err = modify_raw_packet_qp(dev, qp, &raw_qp_param, tx_affinity);
 	} else {
-		err = mlx5_core_qp_modify(dev->mdev, op, optpar, context,
-					  &base->mqp);
+		err = mlx5_core_qp_modify(dev, op, optpar, context, &base->mqp);
 	}
 
 	if (err)
@@ -3927,7 +3923,7 @@ static int mlx5_ib_modify_dct(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		MLX5_SET(dctc, dctc, my_addr_index, attr->ah_attr.grh.sgid_index);
 		MLX5_SET(dctc, dctc, hop_limit, attr->ah_attr.grh.hop_limit);
 
-		err = mlx5_core_create_dct(dev->mdev, &qp->dct.mdct, qp->dct.in,
+		err = mlx5_core_create_dct(dev, &qp->dct.mdct, qp->dct.in,
 					   MLX5_ST_SZ_BYTES(create_dct_in), out,
 					   sizeof(out));
 		if (err)
@@ -3935,7 +3931,7 @@ static int mlx5_ib_modify_dct(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		resp.dctn = qp->dct.mdct.mqp.qpn;
 		err = ib_copy_to_udata(udata, &resp, resp.response_length);
 		if (err) {
-			mlx5_core_destroy_dct(dev->mdev, &qp->dct.mdct);
+			mlx5_core_destroy_dct(dev, &qp->dct.mdct);
 			return err;
 		}
 	} else {
@@ -5558,7 +5554,9 @@ static void to_rdma_ah_attr(struct mlx5_ib_dev *ibdev,
 	rdma_ah_set_path_bits(ah_attr, path->grh_mlid & 0x7f);
 	rdma_ah_set_static_rate(ah_attr,
 				path->static_rate ? path->static_rate - 5 : 0);
-	if (path->grh_mlid & (1 << 7)) {
+
+	if (path->grh_mlid & (1 << 7) ||
+	    ah_attr->type == RDMA_AH_ATTR_TYPE_ROCE) {
 		u32 tc_fl = be32_to_cpu(path->tclass_flowlabel);
 
 		rdma_ah_set_grh(ah_attr, NULL,
@@ -5697,8 +5695,7 @@ static int query_qp_attr(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 	if (!outb)
 		return -ENOMEM;
 
-	err = mlx5_core_qp_query(dev->mdev, &qp->trans_qp.base.mqp, outb,
-				 outlen);
+	err = mlx5_core_qp_query(dev, &qp->trans_qp.base.mqp, outb, outlen);
 	if (err)
 		goto out;
 
@@ -5776,7 +5773,7 @@ static int mlx5_ib_dct_query_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *mqp,
 	if (!out)
 		return -ENOMEM;
 
-	err = mlx5_core_dct_query(dev->mdev, dct, out, outlen);
+	err = mlx5_core_dct_query(dev, dct, out, outlen);
 	if (err)
 		goto out;
 
@@ -5962,7 +5959,7 @@ static int set_delay_drop(struct mlx5_ib_dev *dev)
 	if (dev->delay_drop.activate)
 		goto out;
 
-	err = mlx5_core_set_delay_drop(dev->mdev, dev->delay_drop.timeout);
+	err = mlx5_core_set_delay_drop(dev, dev->delay_drop.timeout);
 	if (err)
 		goto out;
 
@@ -6068,13 +6065,13 @@ static int  create_rq(struct mlx5_ib_rwq *rwq, struct ib_pd *pd,
 	}
 	rq_pas0 = (__be64 *)MLX5_ADDR_OF(wq, wq, pas);
 	mlx5_ib_populate_pas(dev, rwq->umem, rwq->page_shift, rq_pas0, 0);
-	err = mlx5_core_create_rq_tracked(dev->mdev, in, inlen, &rwq->core_qp);
+	err = mlx5_core_create_rq_tracked(dev, in, inlen, &rwq->core_qp);
 	if (!err && init_attr->create_flags & IB_WQ_FLAGS_DELAY_DROP) {
 		err = set_delay_drop(dev);
 		if (err) {
 			mlx5_ib_warn(dev, "Failed to enable delay drop err=%d\n",
 				     err);
-			mlx5_core_destroy_rq_tracked(dev->mdev, &rwq->core_qp);
+			mlx5_core_destroy_rq_tracked(dev, &rwq->core_qp);
 		} else {
 			rwq->create_flags |= MLX5_IB_WQ_FLAGS_DELAY_DROP;
 		}
@@ -6256,7 +6253,7 @@ struct ib_wq *mlx5_ib_create_wq(struct ib_pd *pd,
 	return &rwq->ibwq;
 
 err_copy:
-	mlx5_core_destroy_rq_tracked(dev->mdev, &rwq->core_qp);
+	mlx5_core_destroy_rq_tracked(dev, &rwq->core_qp);
 err_user_rq:
 	destroy_user_rq(dev, pd, rwq, udata);
 err:
@@ -6269,7 +6266,7 @@ void mlx5_ib_destroy_wq(struct ib_wq *wq, struct ib_udata *udata)
 	struct mlx5_ib_dev *dev = to_mdev(wq->device);
 	struct mlx5_ib_rwq *rwq = to_mrwq(wq);
 
-	mlx5_core_destroy_rq_tracked(dev->mdev, &rwq->core_qp);
+	mlx5_core_destroy_rq_tracked(dev, &rwq->core_qp);
 	destroy_user_rq(dev, wq->pd, rwq, udata);
 	kfree(rwq);
 }
@@ -6447,7 +6444,7 @@ int mlx5_ib_modify_wq(struct ib_wq *wq, struct ib_wq_attr *wq_attr,
 				"Receive WQ counters are not supported on current FW\n");
 	}
 
-	err = mlx5_core_modify_rq(dev->mdev, rwq->core_qp.qpn, in, inlen);
+	err = mlx5_core_modify_rq(dev->mdev, rwq->core_qp.qpn, in);
 	if (!err)
 		rwq->ibwq.state = (wq_state == MLX5_RQC_STATE_ERR) ? IB_WQS_ERR : wq_state;
 
diff --git a/drivers/infiniband/hw/mlx5/qp.h b/drivers/infiniband/hw/mlx5/qp.h
new file mode 100644
index 000000000000..ad9d76e3e18a
--- /dev/null
+++ b/drivers/infiniband/hw/mlx5/qp.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/*
+ * Copyright (c) 2013-2020, Mellanox Technologies inc. All rights reserved.
+ */
+
+#ifndef _MLX5_IB_QP_H
+#define _MLX5_IB_QP_H
+
+#include "mlx5_ib.h"
+
+int mlx5_init_qp_table(struct mlx5_ib_dev *dev);
+void mlx5_cleanup_qp_table(struct mlx5_ib_dev *dev);
+
+int mlx5_core_create_dct(struct mlx5_ib_dev *dev, struct mlx5_core_dct *qp,
+			 u32 *in, int inlen, u32 *out, int outlen);
+int mlx5_core_create_qp(struct mlx5_ib_dev *dev, struct mlx5_core_qp *qp,
+			u32 *in, int inlen);
+int mlx5_core_qp_modify(struct mlx5_ib_dev *dev, u16 opcode, u32 opt_param_mask,
+			void *qpc, struct mlx5_core_qp *qp);
+int mlx5_core_destroy_qp(struct mlx5_ib_dev *dev, struct mlx5_core_qp *qp);
+int mlx5_core_destroy_dct(struct mlx5_ib_dev *dev, struct mlx5_core_dct *dct);
+int mlx5_core_qp_query(struct mlx5_ib_dev *dev, struct mlx5_core_qp *qp,
+		       u32 *out, int outlen);
+int mlx5_core_dct_query(struct mlx5_ib_dev *dev, struct mlx5_core_dct *dct,
+			u32 *out, int outlen);
+
+int mlx5_core_set_delay_drop(struct mlx5_ib_dev *dev, u32 timeout_usec);
+
+void mlx5_core_destroy_rq_tracked(struct mlx5_ib_dev *dev,
+				  struct mlx5_core_qp *rq);
+int mlx5_core_create_sq_tracked(struct mlx5_ib_dev *dev, u32 *in, int inlen,
+				struct mlx5_core_qp *sq);
+void mlx5_core_destroy_sq_tracked(struct mlx5_ib_dev *dev,
+				  struct mlx5_core_qp *sq);
+
+int mlx5_core_create_rq_tracked(struct mlx5_ib_dev *dev, u32 *in, int inlen,
+				struct mlx5_core_qp *rq);
+
+struct mlx5_core_rsc_common *mlx5_core_res_hold(struct mlx5_ib_dev *dev,
+						int res_num,
+						enum mlx5_res_type res_type);
+void mlx5_core_res_put(struct mlx5_core_rsc_common *res);
+
+int mlx5_core_xrcd_alloc(struct mlx5_ib_dev *dev, u32 *xrcdn);
+int mlx5_core_xrcd_dealloc(struct mlx5_ib_dev *dev, u32 xrcdn);
+#endif /* _MLX5_IB_QP_H */
diff --git a/drivers/infiniband/hw/mlx5/qpc.c b/drivers/infiniband/hw/mlx5/qpc.c
new file mode 100644
index 000000000000..ea62735042f0
--- /dev/null
+++ b/drivers/infiniband/hw/mlx5/qpc.c
@@ -0,0 +1,605 @@
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+/*
+ * Copyright (c) 2013-2020, Mellanox Technologies inc. All rights reserved.
+ */
+
+#include <linux/gfp.h>
+#include <linux/mlx5/qp.h>
+#include <linux/mlx5/driver.h>
+#include "mlx5_ib.h"
+#include "qp.h"
+
+static int mlx5_core_drain_dct(struct mlx5_ib_dev *dev,
+			       struct mlx5_core_dct *dct);
+
+static struct mlx5_core_rsc_common *
+mlx5_get_rsc(struct mlx5_qp_table *table, u32 rsn)
+{
+	struct mlx5_core_rsc_common *common;
+	unsigned long flags;
+
+	spin_lock_irqsave(&table->lock, flags);
+
+	common = radix_tree_lookup(&table->tree, rsn);
+	if (common)
+		refcount_inc(&common->refcount);
+
+	spin_unlock_irqrestore(&table->lock, flags);
+
+	return common;
+}
+
+void mlx5_core_put_rsc(struct mlx5_core_rsc_common *common)
+{
+	if (refcount_dec_and_test(&common->refcount))
+		complete(&common->free);
+}
+
+static u64 qp_allowed_event_types(void)
+{
+	u64 mask;
+
+	mask = BIT(MLX5_EVENT_TYPE_PATH_MIG) |
+	       BIT(MLX5_EVENT_TYPE_COMM_EST) |
+	       BIT(MLX5_EVENT_TYPE_SQ_DRAINED) |
+	       BIT(MLX5_EVENT_TYPE_SRQ_LAST_WQE) |
+	       BIT(MLX5_EVENT_TYPE_WQ_CATAS_ERROR) |
+	       BIT(MLX5_EVENT_TYPE_PATH_MIG_FAILED) |
+	       BIT(MLX5_EVENT_TYPE_WQ_INVAL_REQ_ERROR) |
+	       BIT(MLX5_EVENT_TYPE_WQ_ACCESS_ERROR);
+
+	return mask;
+}
+
+static u64 rq_allowed_event_types(void)
+{
+	u64 mask;
+
+	mask = BIT(MLX5_EVENT_TYPE_SRQ_LAST_WQE) |
+	       BIT(MLX5_EVENT_TYPE_WQ_CATAS_ERROR);
+
+	return mask;
+}
+
+static u64 sq_allowed_event_types(void)
+{
+	return BIT(MLX5_EVENT_TYPE_WQ_CATAS_ERROR);
+}
+
+static u64 dct_allowed_event_types(void)
+{
+	return BIT(MLX5_EVENT_TYPE_DCT_DRAINED);
+}
+
+static bool is_event_type_allowed(int rsc_type, int event_type)
+{
+	switch (rsc_type) {
+	case MLX5_EVENT_QUEUE_TYPE_QP:
+		return BIT(event_type) & qp_allowed_event_types();
+	case MLX5_EVENT_QUEUE_TYPE_RQ:
+		return BIT(event_type) & rq_allowed_event_types();
+	case MLX5_EVENT_QUEUE_TYPE_SQ:
+		return BIT(event_type) & sq_allowed_event_types();
+	case MLX5_EVENT_QUEUE_TYPE_DCT:
+		return BIT(event_type) & dct_allowed_event_types();
+	default:
+		WARN(1, "Event arrived for unknown resource type");
+		return false;
+	}
+}
+
+static int rsc_event_notifier(struct notifier_block *nb,
+			      unsigned long type, void *data)
+{
+	struct mlx5_core_rsc_common *common;
+	struct mlx5_qp_table *table;
+	struct mlx5_core_dct *dct;
+	u8 event_type = (u8)type;
+	struct mlx5_core_qp *qp;
+	struct mlx5_eqe *eqe;
+	u32 rsn;
+
+	switch (event_type) {
+	case MLX5_EVENT_TYPE_DCT_DRAINED:
+		eqe = data;
+		rsn = be32_to_cpu(eqe->data.dct.dctn) & 0xffffff;
+		rsn |= (MLX5_RES_DCT << MLX5_USER_INDEX_LEN);
+		break;
+	case MLX5_EVENT_TYPE_PATH_MIG:
+	case MLX5_EVENT_TYPE_COMM_EST:
+	case MLX5_EVENT_TYPE_SQ_DRAINED:
+	case MLX5_EVENT_TYPE_SRQ_LAST_WQE:
+	case MLX5_EVENT_TYPE_WQ_CATAS_ERROR:
+	case MLX5_EVENT_TYPE_PATH_MIG_FAILED:
+	case MLX5_EVENT_TYPE_WQ_INVAL_REQ_ERROR:
+	case MLX5_EVENT_TYPE_WQ_ACCESS_ERROR:
+		eqe = data;
+		rsn = be32_to_cpu(eqe->data.qp_srq.qp_srq_n) & 0xffffff;
+		rsn |= (eqe->data.qp_srq.type << MLX5_USER_INDEX_LEN);
+		break;
+	default:
+		return NOTIFY_DONE;
+	}
+
+	table = container_of(nb, struct mlx5_qp_table, nb);
+	common = mlx5_get_rsc(table, rsn);
+	if (!common)
+		return NOTIFY_OK;
+
+	if (!is_event_type_allowed((rsn >> MLX5_USER_INDEX_LEN), event_type))
+		goto out;
+
+	switch (common->res) {
+	case MLX5_RES_QP:
+	case MLX5_RES_RQ:
+	case MLX5_RES_SQ:
+		qp = (struct mlx5_core_qp *)common;
+		qp->event(qp, event_type);
+		break;
+	case MLX5_RES_DCT:
+		dct = (struct mlx5_core_dct *)common;
+		if (event_type == MLX5_EVENT_TYPE_DCT_DRAINED)
+			complete(&dct->drained);
+		break;
+	default:
+		break;
+	}
+out:
+	mlx5_core_put_rsc(common);
+
+	return NOTIFY_OK;
+}
+
+static int create_resource_common(struct mlx5_ib_dev *dev,
+				  struct mlx5_core_qp *qp, int rsc_type)
+{
+	struct mlx5_qp_table *table = &dev->qp_table;
+	int err;
+
+	qp->common.res = rsc_type;
+	spin_lock_irq(&table->lock);
+	err = radix_tree_insert(&table->tree,
+				qp->qpn | (rsc_type << MLX5_USER_INDEX_LEN),
+				qp);
+	spin_unlock_irq(&table->lock);
+	if (err)
+		return err;
+
+	refcount_set(&qp->common.refcount, 1);
+	init_completion(&qp->common.free);
+	qp->pid = current->pid;
+
+	return 0;
+}
+
+static void destroy_resource_common(struct mlx5_ib_dev *dev,
+				    struct mlx5_core_qp *qp)
+{
+	struct mlx5_qp_table *table = &dev->qp_table;
+	unsigned long flags;
+
+	spin_lock_irqsave(&table->lock, flags);
+	radix_tree_delete(&table->tree,
+			  qp->qpn | (qp->common.res << MLX5_USER_INDEX_LEN));
+	spin_unlock_irqrestore(&table->lock, flags);
+	mlx5_core_put_rsc((struct mlx5_core_rsc_common *)qp);
+	wait_for_completion(&qp->common.free);
+}
+
+static int _mlx5_core_destroy_dct(struct mlx5_ib_dev *dev,
+				  struct mlx5_core_dct *dct, bool need_cleanup)
+{
+	u32 in[MLX5_ST_SZ_DW(destroy_dct_in)] = {};
+	struct mlx5_core_qp *qp = &dct->mqp;
+	int err;
+
+	err = mlx5_core_drain_dct(dev, dct);
+	if (err) {
+		if (dev->mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR)
+			goto destroy;
+
+		return err;
+	}
+	wait_for_completion(&dct->drained);
+destroy:
+	if (need_cleanup)
+		destroy_resource_common(dev, &dct->mqp);
+	MLX5_SET(destroy_dct_in, in, opcode, MLX5_CMD_OP_DESTROY_DCT);
+	MLX5_SET(destroy_dct_in, in, dctn, qp->qpn);
+	MLX5_SET(destroy_dct_in, in, uid, qp->uid);
+	err = mlx5_cmd_exec_in(dev->mdev, destroy_dct, in);
+	return err;
+}
+
+int mlx5_core_create_dct(struct mlx5_ib_dev *dev, struct mlx5_core_dct *dct,
+			 u32 *in, int inlen, u32 *out, int outlen)
+{
+	struct mlx5_core_qp *qp = &dct->mqp;
+	int err;
+
+	init_completion(&dct->drained);
+	MLX5_SET(create_dct_in, in, opcode, MLX5_CMD_OP_CREATE_DCT);
+
+	err = mlx5_cmd_exec(dev->mdev, in, inlen, out, outlen);
+	if (err)
+		return err;
+
+	qp->qpn = MLX5_GET(create_dct_out, out, dctn);
+	qp->uid = MLX5_GET(create_dct_in, in, uid);
+	err = create_resource_common(dev, qp, MLX5_RES_DCT);
+	if (err)
+		goto err_cmd;
+
+	return 0;
+err_cmd:
+	_mlx5_core_destroy_dct(dev, dct, false);
+	return err;
+}
+
+int mlx5_core_create_qp(struct mlx5_ib_dev *dev, struct mlx5_core_qp *qp,
+			u32 *in, int inlen)
+{
+	u32 out[MLX5_ST_SZ_DW(create_qp_out)] = {};
+	u32 din[MLX5_ST_SZ_DW(destroy_qp_in)] = {};
+	int err;
+
+	MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP);
+
+	err = mlx5_cmd_exec(dev->mdev, in, inlen, out, sizeof(out));
+	if (err)
+		return err;
+
+	qp->uid = MLX5_GET(create_qp_in, in, uid);
+	qp->qpn = MLX5_GET(create_qp_out, out, qpn);
+
+	err = create_resource_common(dev, qp, MLX5_RES_QP);
+	if (err)
+		goto err_cmd;
+
+	mlx5_debug_qp_add(dev->mdev, qp);
+
+	return 0;
+
+err_cmd:
+	MLX5_SET(destroy_qp_in, din, opcode, MLX5_CMD_OP_DESTROY_QP);
+	MLX5_SET(destroy_qp_in, din, qpn, qp->qpn);
+	MLX5_SET(destroy_qp_in, din, uid, qp->uid);
+	mlx5_cmd_exec_in(dev->mdev, destroy_qp, din);
+	return err;
+}
+
+static int mlx5_core_drain_dct(struct mlx5_ib_dev *dev,
+			       struct mlx5_core_dct *dct)
+{
+	u32 in[MLX5_ST_SZ_DW(drain_dct_in)] = {};
+	struct mlx5_core_qp *qp = &dct->mqp;
+
+	MLX5_SET(drain_dct_in, in, opcode, MLX5_CMD_OP_DRAIN_DCT);
+	MLX5_SET(drain_dct_in, in, dctn, qp->qpn);
+	MLX5_SET(drain_dct_in, in, uid, qp->uid);
+	return mlx5_cmd_exec_in(dev->mdev, drain_dct, in);
+}
+
+int mlx5_core_destroy_dct(struct mlx5_ib_dev *dev,
+			  struct mlx5_core_dct *dct)
+{
+	return _mlx5_core_destroy_dct(dev, dct, true);
+}
+
+int mlx5_core_destroy_qp(struct mlx5_ib_dev *dev, struct mlx5_core_qp *qp)
+{
+	u32 in[MLX5_ST_SZ_DW(destroy_qp_in)] = {};
+
+	mlx5_debug_qp_remove(dev->mdev, qp);
+
+	destroy_resource_common(dev, qp);
+
+	MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP);
+	MLX5_SET(destroy_qp_in, in, qpn, qp->qpn);
+	MLX5_SET(destroy_qp_in, in, uid, qp->uid);
+	mlx5_cmd_exec_in(dev->mdev, destroy_qp, in);
+	return 0;
+}
+
+int mlx5_core_set_delay_drop(struct mlx5_ib_dev *dev,
+			     u32 timeout_usec)
+{
+	u32 in[MLX5_ST_SZ_DW(set_delay_drop_params_in)] = {};
+
+	MLX5_SET(set_delay_drop_params_in, in, opcode,
+		 MLX5_CMD_OP_SET_DELAY_DROP_PARAMS);
+	MLX5_SET(set_delay_drop_params_in, in, delay_drop_timeout,
+		 timeout_usec / 100);
+	return mlx5_cmd_exec_in(dev->mdev, set_delay_drop_params, in);
+}
+
+struct mbox_info {
+	u32 *in;
+	u32 *out;
+	int inlen;
+	int outlen;
+};
+
+static int mbox_alloc(struct mbox_info *mbox, int inlen, int outlen)
+{
+	mbox->inlen  = inlen;
+	mbox->outlen = outlen;
+	mbox->in = kzalloc(mbox->inlen, GFP_KERNEL);
+	mbox->out = kzalloc(mbox->outlen, GFP_KERNEL);
+	if (!mbox->in || !mbox->out) {
+		kfree(mbox->in);
+		kfree(mbox->out);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void mbox_free(struct mbox_info *mbox)
+{
+	kfree(mbox->in);
+	kfree(mbox->out);
+}
+
+static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
+				u32 opt_param_mask, void *qpc,
+				struct mbox_info *mbox, u16 uid)
+{
+	mbox->out = NULL;
+	mbox->in = NULL;
+
+#define MBOX_ALLOC(mbox, typ)  \
+	mbox_alloc(mbox, MLX5_ST_SZ_BYTES(typ##_in), MLX5_ST_SZ_BYTES(typ##_out))
+
+#define MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid)                            \
+	do {                                                                   \
+		MLX5_SET(typ##_in, in, opcode, _opcode);                       \
+		MLX5_SET(typ##_in, in, qpn, _qpn);                             \
+		MLX5_SET(typ##_in, in, uid, _uid);                             \
+	} while (0)
+
+#define MOD_QP_IN_SET_QPC(typ, in, _opcode, _qpn, _opt_p, _qpc, _uid)          \
+	do {                                                                   \
+		MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid);                   \
+		MLX5_SET(typ##_in, in, opt_param_mask, _opt_p);                \
+		memcpy(MLX5_ADDR_OF(typ##_in, in, qpc), _qpc,                  \
+		       MLX5_ST_SZ_BYTES(qpc));                                 \
+	} while (0)
+
+	switch (opcode) {
+	/* 2RST & 2ERR */
+	case MLX5_CMD_OP_2RST_QP:
+		if (MBOX_ALLOC(mbox, qp_2rst))
+			return -ENOMEM;
+		MOD_QP_IN_SET(qp_2rst, mbox->in, opcode, qpn, uid);
+		break;
+	case MLX5_CMD_OP_2ERR_QP:
+		if (MBOX_ALLOC(mbox, qp_2err))
+			return -ENOMEM;
+		MOD_QP_IN_SET(qp_2err, mbox->in, opcode, qpn, uid);
+		break;
+
+	/* MODIFY with QPC */
+	case MLX5_CMD_OP_RST2INIT_QP:
+		if (MBOX_ALLOC(mbox, rst2init_qp))
+			return -ENOMEM;
+		MOD_QP_IN_SET_QPC(rst2init_qp, mbox->in, opcode, qpn,
+				  opt_param_mask, qpc, uid);
+		break;
+	case MLX5_CMD_OP_INIT2RTR_QP:
+		if (MBOX_ALLOC(mbox, init2rtr_qp))
+			return -ENOMEM;
+		MOD_QP_IN_SET_QPC(init2rtr_qp, mbox->in, opcode, qpn,
+				  opt_param_mask, qpc, uid);
+		break;
+	case MLX5_CMD_OP_RTR2RTS_QP:
+		if (MBOX_ALLOC(mbox, rtr2rts_qp))
+			return -ENOMEM;
+		MOD_QP_IN_SET_QPC(rtr2rts_qp, mbox->in, opcode, qpn,
+				  opt_param_mask, qpc, uid);
+		break;
+	case MLX5_CMD_OP_RTS2RTS_QP:
+		if (MBOX_ALLOC(mbox, rts2rts_qp))
+			return -ENOMEM;
+		MOD_QP_IN_SET_QPC(rts2rts_qp, mbox->in, opcode, qpn,
+				  opt_param_mask, qpc, uid);
+		break;
+	case MLX5_CMD_OP_SQERR2RTS_QP:
+		if (MBOX_ALLOC(mbox, sqerr2rts_qp))
+			return -ENOMEM;
+		MOD_QP_IN_SET_QPC(sqerr2rts_qp, mbox->in, opcode, qpn,
+				  opt_param_mask, qpc, uid);
+		break;
+	case MLX5_CMD_OP_INIT2INIT_QP:
+		if (MBOX_ALLOC(mbox, init2init_qp))
+			return -ENOMEM;
+		MOD_QP_IN_SET_QPC(init2init_qp, mbox->in, opcode, qpn,
+				  opt_param_mask, qpc, uid);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int mlx5_core_qp_modify(struct mlx5_ib_dev *dev, u16 opcode, u32 opt_param_mask,
+			void *qpc, struct mlx5_core_qp *qp)
+{
+	struct mbox_info mbox;
+	int err;
+
+	err = modify_qp_mbox_alloc(dev->mdev, opcode, qp->qpn,
+				   opt_param_mask, qpc, &mbox, qp->uid);
+	if (err)
+		return err;
+
+	err = mlx5_cmd_exec(dev->mdev, mbox.in, mbox.inlen, mbox.out,
+			    mbox.outlen);
+	mbox_free(&mbox);
+	return err;
+}
+
+int mlx5_init_qp_table(struct mlx5_ib_dev *dev)
+{
+	struct mlx5_qp_table *table = &dev->qp_table;
+
+	spin_lock_init(&table->lock);
+	INIT_RADIX_TREE(&table->tree, GFP_ATOMIC);
+	mlx5_qp_debugfs_init(dev->mdev);
+
+	table->nb.notifier_call = rsc_event_notifier;
+	mlx5_notifier_register(dev->mdev, &table->nb);
+
+	return 0;
+}
+
+void mlx5_cleanup_qp_table(struct mlx5_ib_dev *dev)
+{
+	struct mlx5_qp_table *table = &dev->qp_table;
+
+	mlx5_notifier_unregister(dev->mdev, &table->nb);
+	mlx5_qp_debugfs_cleanup(dev->mdev);
+}
+
+int mlx5_core_qp_query(struct mlx5_ib_dev *dev, struct mlx5_core_qp *qp,
+		       u32 *out, int outlen)
+{
+	u32 in[MLX5_ST_SZ_DW(query_qp_in)] = {};
+
+	MLX5_SET(query_qp_in, in, opcode, MLX5_CMD_OP_QUERY_QP);
+	MLX5_SET(query_qp_in, in, qpn, qp->qpn);
+	return mlx5_cmd_exec(dev->mdev, in, sizeof(in), out, outlen);
+}
+
+int mlx5_core_dct_query(struct mlx5_ib_dev *dev, struct mlx5_core_dct *dct,
+			u32 *out, int outlen)
+{
+	u32 in[MLX5_ST_SZ_DW(query_dct_in)] = {};
+	struct mlx5_core_qp *qp = &dct->mqp;
+
+	MLX5_SET(query_dct_in, in, opcode, MLX5_CMD_OP_QUERY_DCT);
+	MLX5_SET(query_dct_in, in, dctn, qp->qpn);
+
+	return mlx5_cmd_exec(dev->mdev, (void *)&in, sizeof(in), (void *)out,
+			     outlen);
+}
+
+int mlx5_core_xrcd_alloc(struct mlx5_ib_dev *dev, u32 *xrcdn)
+{
+	u32 out[MLX5_ST_SZ_DW(alloc_xrcd_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(alloc_xrcd_in)] = {};
+	int err;
+
+	MLX5_SET(alloc_xrcd_in, in, opcode, MLX5_CMD_OP_ALLOC_XRCD);
+	err = mlx5_cmd_exec_inout(dev->mdev, alloc_xrcd, in, out);
+	if (!err)
+		*xrcdn = MLX5_GET(alloc_xrcd_out, out, xrcd);
+	return err;
+}
+
+int mlx5_core_xrcd_dealloc(struct mlx5_ib_dev *dev, u32 xrcdn)
+{
+	u32 in[MLX5_ST_SZ_DW(dealloc_xrcd_in)] = {};
+
+	MLX5_SET(dealloc_xrcd_in, in, opcode, MLX5_CMD_OP_DEALLOC_XRCD);
+	MLX5_SET(dealloc_xrcd_in, in, xrcd, xrcdn);
+	return mlx5_cmd_exec_in(dev->mdev, dealloc_xrcd, in);
+}
+
+static void destroy_rq_tracked(struct mlx5_ib_dev *dev, u32 rqn, u16 uid)
+{
+	u32 in[MLX5_ST_SZ_DW(destroy_rq_in)] = {};
+
+	MLX5_SET(destroy_rq_in, in, opcode, MLX5_CMD_OP_DESTROY_RQ);
+	MLX5_SET(destroy_rq_in, in, rqn, rqn);
+	MLX5_SET(destroy_rq_in, in, uid, uid);
+	mlx5_cmd_exec_in(dev->mdev, destroy_rq, in);
+}
+
+int mlx5_core_create_rq_tracked(struct mlx5_ib_dev *dev, u32 *in, int inlen,
+				struct mlx5_core_qp *rq)
+{
+	int err;
+	u32 rqn;
+
+	err = mlx5_core_create_rq(dev->mdev, in, inlen, &rqn);
+	if (err)
+		return err;
+
+	rq->uid = MLX5_GET(create_rq_in, in, uid);
+	rq->qpn = rqn;
+	err = create_resource_common(dev, rq, MLX5_RES_RQ);
+	if (err)
+		goto err_destroy_rq;
+
+	return 0;
+
+err_destroy_rq:
+	destroy_rq_tracked(dev, rq->qpn, rq->uid);
+
+	return err;
+}
+
+void mlx5_core_destroy_rq_tracked(struct mlx5_ib_dev *dev,
+				  struct mlx5_core_qp *rq)
+{
+	destroy_resource_common(dev, rq);
+	destroy_rq_tracked(dev, rq->qpn, rq->uid);
+}
+
+static void destroy_sq_tracked(struct mlx5_ib_dev *dev, u32 sqn, u16 uid)
+{
+	u32 in[MLX5_ST_SZ_DW(destroy_sq_in)] = {};
+
+	MLX5_SET(destroy_sq_in, in, opcode, MLX5_CMD_OP_DESTROY_SQ);
+	MLX5_SET(destroy_sq_in, in, sqn, sqn);
+	MLX5_SET(destroy_sq_in, in, uid, uid);
+	mlx5_cmd_exec_in(dev->mdev, destroy_sq, in);
+}
+
+int mlx5_core_create_sq_tracked(struct mlx5_ib_dev *dev, u32 *in, int inlen,
+				struct mlx5_core_qp *sq)
+{
+	u32 out[MLX5_ST_SZ_DW(create_sq_out)] = {};
+	int err;
+
+	MLX5_SET(create_sq_in, in, opcode, MLX5_CMD_OP_CREATE_SQ);
+	err = mlx5_cmd_exec(dev->mdev, in, inlen, out, sizeof(out));
+	if (err)
+		return err;
+
+	sq->qpn = MLX5_GET(create_sq_out, out, sqn);
+	sq->uid = MLX5_GET(create_sq_in, in, uid);
+	err = create_resource_common(dev, sq, MLX5_RES_SQ);
+	if (err)
+		goto err_destroy_sq;
+
+	return 0;
+
+err_destroy_sq:
+	destroy_sq_tracked(dev, sq->qpn, sq->uid);
+
+	return err;
+}
+
+void mlx5_core_destroy_sq_tracked(struct mlx5_ib_dev *dev,
+				  struct mlx5_core_qp *sq)
+{
+	destroy_resource_common(dev, sq);
+	destroy_sq_tracked(dev, sq->qpn, sq->uid);
+}
+
+struct mlx5_core_rsc_common *mlx5_core_res_hold(struct mlx5_ib_dev *dev,
+						int res_num,
+						enum mlx5_res_type res_type)
+{
+	u32 rsn = res_num | (res_type << MLX5_USER_INDEX_LEN);
+	struct mlx5_qp_table *table = &dev->qp_table;
+
+	return mlx5_get_rsc(table, rsn);
+}
+
+void mlx5_core_res_put(struct mlx5_core_rsc_common *res)
+{
+	mlx5_core_put_rsc(res);
+}
diff --git a/drivers/infiniband/hw/mlx5/srq.c b/drivers/infiniband/hw/mlx5/srq.c
index b1a8a9175040..6d1ff13d2283 100644
--- a/drivers/infiniband/hw/mlx5/srq.c
+++ b/drivers/infiniband/hw/mlx5/srq.c
@@ -310,12 +310,18 @@ int mlx5_ib_create_srq(struct ib_srq *ib_srq,
 	srq->msrq.event = mlx5_ib_srq_event;
 	srq->ibsrq.ext.xrc.srq_num = srq->msrq.srqn;
 
-	if (udata)
-		if (ib_copy_to_udata(udata, &srq->msrq.srqn, sizeof(__u32))) {
+	if (udata) {
+		struct mlx5_ib_create_srq_resp resp = {
+			.srqn = srq->msrq.srqn,
+		};
+
+		if (ib_copy_to_udata(udata, &resp, min(udata->outlen,
+				     sizeof(resp)))) {
 			mlx5_ib_dbg(dev, "copy to user failed\n");
 			err = -EFAULT;
 			goto err_core;
 		}
+	}
 
 	init_attr->attr.max_wr = srq->msrq.max - 1;
 
diff --git a/drivers/infiniband/hw/mlx5/srq_cmd.c b/drivers/infiniband/hw/mlx5/srq_cmd.c
index 8fc3630a9d4c..c851570791af 100644
--- a/drivers/infiniband/hw/mlx5/srq_cmd.c
+++ b/drivers/infiniband/hw/mlx5/srq_cmd.c
@@ -5,9 +5,9 @@
 
 #include <linux/kernel.h>
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include "mlx5_ib.h"
 #include "srq.h"
+#include "qp.h"
 
 static int get_pas_size(struct mlx5_srq_attr *in)
 {
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 91d64dd71a8a..8bcbc884e5b6 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -2375,7 +2375,6 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd)
 	struct qib_devdata *dd = ppd->dd;
 	u64 val, guid, ibc;
 	unsigned long flags;
-	int ret = 0;
 
 	/*
 	 * SerDes model not in Pd, but still need to
@@ -2510,7 +2509,7 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd)
 		val | ERR_MASK_N(IBStatusChanged));
 
 	/* Always zero until we start messing with SerDes for real */
-	return ret;
+	return 0;
 }
 
 /**
@@ -6875,7 +6874,7 @@ static int init_sdma_7322_regs(struct qib_pportdata *ppd)
 	struct qib_devdata *dd = ppd->dd;
 	unsigned lastbuf, erstbuf;
 	u64 senddmabufmask[3] = { 0 };
-	int n, ret = 0;
+	int n;
 
 	qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys);
 	qib_sdma_7322_setlengen(ppd);
@@ -6904,7 +6903,7 @@ static int init_sdma_7322_regs(struct qib_pportdata *ppd)
 	qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]);
 	qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]);
 	qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]);
-	return ret;
+	return 0;
 }
 
 /* sdma_lock must be held */
diff --git a/drivers/infiniband/sw/rdmavt/cq.c b/drivers/infiniband/sw/rdmavt/cq.c
index 5724cbbe38b1..04d2e72017fe 100644
--- a/drivers/infiniband/sw/rdmavt/cq.c
+++ b/drivers/infiniband/sw/rdmavt/cq.c
@@ -248,8 +248,8 @@ int rvt_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
 	 */
 	if (udata && udata->outlen >= sizeof(__u64)) {
 		cq->ip = rvt_create_mmap_info(rdi, sz, udata, u_wc);
-		if (!cq->ip) {
-			err = -ENOMEM;
+		if (IS_ERR(cq->ip)) {
+			err = PTR_ERR(cq->ip);
 			goto bail_wc;
 		}
 
diff --git a/drivers/infiniband/sw/rdmavt/mmap.c b/drivers/infiniband/sw/rdmavt/mmap.c
index 652f4a7efc1b..37853aa3bcf7 100644
--- a/drivers/infiniband/sw/rdmavt/mmap.c
+++ b/drivers/infiniband/sw/rdmavt/mmap.c
@@ -154,7 +154,7 @@ int rvt_mmap(struct ib_ucontext *context, struct vm_area_struct *vma)
  * @udata: user data (must be valid!)
  * @obj: opaque pointer to a cq, wq etc
  *
- * Return: rvt_mmap struct on success
+ * Return: rvt_mmap struct on success, ERR_PTR on failure
  */
 struct rvt_mmap_info *rvt_create_mmap_info(struct rvt_dev_info *rdi, u32 size,
 					   struct ib_udata *udata, void *obj)
@@ -166,7 +166,7 @@ struct rvt_mmap_info *rvt_create_mmap_info(struct rvt_dev_info *rdi, u32 size,
 
 	ip = kmalloc_node(sizeof(*ip), GFP_KERNEL, rdi->dparms.node);
 	if (!ip)
-		return ip;
+		return ERR_PTR(-ENOMEM);
 
 	size = PAGE_ALIGN(size);
 
diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c
index 0e1b291d2cec..500a7ee04c44 100644
--- a/drivers/infiniband/sw/rdmavt/qp.c
+++ b/drivers/infiniband/sw/rdmavt/qp.c
@@ -1244,8 +1244,8 @@ struct ib_qp *rvt_create_qp(struct ib_pd *ibpd,
 
 			qp->ip = rvt_create_mmap_info(rdi, s, udata,
 						      qp->r_rq.wq);
-			if (!qp->ip) {
-				ret = ERR_PTR(-ENOMEM);
+			if (IS_ERR(qp->ip)) {
+				ret = ERR_CAST(qp->ip);
 				goto bail_qpn;
 			}
 
diff --git a/drivers/infiniband/sw/rdmavt/srq.c b/drivers/infiniband/sw/rdmavt/srq.c
index 24fef021d51d..f547c115af03 100644
--- a/drivers/infiniband/sw/rdmavt/srq.c
+++ b/drivers/infiniband/sw/rdmavt/srq.c
@@ -111,8 +111,8 @@ int rvt_create_srq(struct ib_srq *ibsrq, struct ib_srq_init_attr *srq_init_attr,
 		u32 s = sizeof(struct rvt_rwq) + srq->rq.size * sz;
 
 		srq->ip = rvt_create_mmap_info(dev, s, udata, srq->rq.wq);
-		if (!srq->ip) {
-			ret = -ENOMEM;
+		if (IS_ERR(srq->ip)) {
+			ret = PTR_ERR(srq->ip);
 			goto bail_wq;
 		}
 
diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
index 4afdd2e20883..5642eefb4ba1 100644
--- a/drivers/infiniband/sw/rxe/rxe.c
+++ b/drivers/infiniband/sw/rxe/rxe.c
@@ -77,6 +77,7 @@ static void rxe_init_device_param(struct rxe_dev *rxe)
 {
 	rxe->max_inline_data			= RXE_MAX_INLINE_DATA;
 
+	rxe->attr.vendor_id			= RXE_VENDOR_ID;
 	rxe->attr.max_mr_size			= RXE_MAX_MR_SIZE;
 	rxe->attr.page_size_cap			= RXE_PAGE_SIZE_CAP;
 	rxe->attr.max_qp			= RXE_MAX_QP;
diff --git a/drivers/infiniband/sw/rxe/rxe_param.h b/drivers/infiniband/sw/rxe/rxe_param.h
index f59616b02477..99e9d8ba9767 100644
--- a/drivers/infiniband/sw/rxe/rxe_param.h
+++ b/drivers/infiniband/sw/rxe/rxe_param.h
@@ -127,6 +127,9 @@ enum rxe_device_param {
 
 	/* Delay before calling arbiter timer */
 	RXE_NSEC_ARB_TIMER_DELAY	= 200,
+
+	/* IBTA v1.4 A3.3.1 VENDOR INFORMATION section */
+	RXE_VENDOR_ID			= 0XFFFFFF,
 };
 
 /* default/initial rxe port parameters */
diff --git a/drivers/infiniband/sw/siw/siw_qp_tx.c b/drivers/infiniband/sw/siw/siw_qp_tx.c
index ae92c8080967..9f53aa4feb87 100644
--- a/drivers/infiniband/sw/siw/siw_qp_tx.c
+++ b/drivers/infiniband/sw/siw/siw_qp_tx.c
@@ -920,20 +920,27 @@ static int siw_fastreg_mr(struct ib_pd *pd, struct siw_sqe *sqe)
 {
 	struct ib_mr *base_mr = (struct ib_mr *)(uintptr_t)sqe->base_mr;
 	struct siw_device *sdev = to_siw_dev(pd->device);
-	struct siw_mem *mem = siw_mem_id2obj(sdev, sqe->rkey  >> 8);
+	struct siw_mem *mem;
 	int rv = 0;
 
 	siw_dbg_pd(pd, "STag 0x%08x\n", sqe->rkey);
 
-	if (unlikely(!mem || !base_mr)) {
+	if (unlikely(!base_mr)) {
 		pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);
 		return -EINVAL;
 	}
+
 	if (unlikely(base_mr->rkey >> 8 != sqe->rkey  >> 8)) {
 		pr_warn("siw: fastreg: STag 0x%08x: bad MR\n", sqe->rkey);
-		rv = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
+
+	mem = siw_mem_id2obj(sdev, sqe->rkey  >> 8);
+	if (unlikely(!mem)) {
+		pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);
+		return -EINVAL;
+	}
+
 	if (unlikely(mem->pd != pd)) {
 		pr_warn("siw: fastreg: PD mismatch\n");
 		rv = -EINVAL;
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 98552749d71c..9d02d8088f1c 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -135,14 +135,11 @@ static bool srpt_set_ch_state(struct srpt_rdma_ch *ch, enum rdma_ch_state new)
 static void srpt_event_handler(struct ib_event_handler *handler,
 			       struct ib_event *event)
 {
-	struct srpt_device *sdev;
+	struct srpt_device *sdev =
+		container_of(handler, struct srpt_device, event_handler);
 	struct srpt_port *sport;
 	u8 port_num;
 
-	sdev = ib_get_client_data(event->device, &srpt_client);
-	if (!sdev || sdev->device != event->device)
-		return;
-
 	pr_debug("ASYNC event= %d on device= %s\n", event->event,
 		 dev_name(&sdev->device->dev));
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index cb6e3a5f509c..e494295d1c7b 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -282,7 +282,8 @@ static void evdev_pass_values(struct evdev_client *client,
 	spin_unlock(&client->buffer_lock);
 
 	if (wakeup)
-		wake_up_interruptible(&evdev->wait);
+		wake_up_interruptible_poll(&evdev->wait,
+			EPOLLIN | EPOLLOUT | EPOLLRDNORM | EPOLLWRNORM);
 }
 
 /*
@@ -326,20 +327,6 @@ static int evdev_fasync(int fd, struct file *file, int on)
 	return fasync_helper(fd, file, on, &client->fasync);
 }
 
-static int evdev_flush(struct file *file, fl_owner_t id)
-{
-	struct evdev_client *client = file->private_data;
-	struct evdev *evdev = client->evdev;
-
-	mutex_lock(&evdev->mutex);
-
-	if (evdev->exist && !client->revoked)
-		input_flush_device(&evdev->handle, file);
-
-	mutex_unlock(&evdev->mutex);
-	return 0;
-}
-
 static void evdev_free(struct device *dev)
 {
 	struct evdev *evdev = container_of(dev, struct evdev, dev);
@@ -443,7 +430,7 @@ static void evdev_hangup(struct evdev *evdev)
 		kill_fasync(&client->fasync, SIGIO, POLL_HUP);
 	spin_unlock(&evdev->client_lock);
 
-	wake_up_interruptible(&evdev->wait);
+	wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR);
 }
 
 static int evdev_release(struct inode *inode, struct file *file)
@@ -453,6 +440,10 @@ static int evdev_release(struct inode *inode, struct file *file)
 	unsigned int i;
 
 	mutex_lock(&evdev->mutex);
+
+	if (evdev->exist && !client->revoked)
+		input_flush_device(&evdev->handle, file);
+
 	evdev_ungrab(evdev, client);
 	mutex_unlock(&evdev->mutex);
 
@@ -955,7 +946,7 @@ static int evdev_revoke(struct evdev *evdev, struct evdev_client *client,
 	client->revoked = true;
 	evdev_ungrab(evdev, client);
 	input_flush_device(&evdev->handle, file);
-	wake_up_interruptible(&evdev->wait);
+	wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR);
 
 	return 0;
 }
@@ -1310,7 +1301,6 @@ static const struct file_operations evdev_fops = {
 	.compat_ioctl	= evdev_ioctl_compat,
 #endif
 	.fasync		= evdev_fasync,
-	.flush		= evdev_flush,
 	.llseek		= no_llseek,
 };
 
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 6b40a1c68f9f..c77cdb3b62b5 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -458,6 +458,16 @@ static const u8 xboxone_fw2015_init[] = {
 	0x05, 0x20, 0x00, 0x01, 0x00
 };
 
+/*
+ * This packet is required for Xbox One S (0x045e:0x02ea)
+ * and Xbox One Elite Series 2 (0x045e:0x0b00) pads to
+ * initialize the controller that was previously used in
+ * Bluetooth mode.
+ */
+static const u8 xboxone_s_init[] = {
+	0x05, 0x20, 0x00, 0x0f, 0x06
+};
+
 /*
  * This packet is required for the Titanfall 2 Xbox One pads
  * (0x0e6f:0x0165) to finish initialization and for Hori pads
@@ -516,6 +526,8 @@ static const struct xboxone_init_packet xboxone_init_packets[] = {
 	XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
+	XBOXONE_INIT_PKT(0x045e, 0x02ea, xboxone_s_init),
+	XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init1),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init2),
 	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 28de965a08d5..793ecbbda32c 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -701,7 +701,7 @@ config KEYBOARD_SPEAR
 	  Say Y here if you want to use the SPEAR keyboard.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called spear-keboard.
+	  module will be called spear-keyboard.
 
 config KEYBOARD_TC3589X
 	tristate "TC3589X Keypad support"
diff --git a/drivers/input/keyboard/applespi.c b/drivers/input/keyboard/applespi.c
index d38398526965..14362ebab9a9 100644
--- a/drivers/input/keyboard/applespi.c
+++ b/drivers/input/keyboard/applespi.c
@@ -186,7 +186,7 @@ struct touchpad_protocol {
 	u8			number_of_fingers;
 	u8			clicked2;
 	u8			unknown3[16];
-	struct tp_finger	fingers[0];
+	struct tp_finger	fingers[];
 };
 
 /**
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 7e3eae54c192..6ec28265771d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -24,6 +24,7 @@
 #include <linux/libps2.h>
 #include <linux/mutex.h>
 #include <linux/dmi.h>
+#include <linux/property.h>
 
 #define DRIVER_DESC	"AT and PS/2 keyboard driver"
 
@@ -63,6 +64,11 @@ static bool atkbd_terminal;
 module_param_named(terminal, atkbd_terminal, bool, 0);
 MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
 
+#define MAX_FUNCTION_ROW_KEYS	24
+
+#define SCANCODE(keymap)	((keymap >> 16) & 0xFFFF)
+#define KEYCODE(keymap)		(keymap & 0xFFFF)
+
 /*
  * Scancode to keycode tables. These are just the default setting, and
  * are loadable via a userland utility.
@@ -230,6 +236,9 @@ struct atkbd {
 
 	/* Serializes reconnect(), attr->set() and event work */
 	struct mutex mutex;
+
+	u32 function_row_physmap[MAX_FUNCTION_ROW_KEYS];
+	int num_function_row_keys;
 };
 
 /*
@@ -283,6 +292,7 @@ static struct device_attribute atkbd_attr_##_name =				\
 	__ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL);
 
 ATKBD_DEFINE_RO_ATTR(err_count);
+ATKBD_DEFINE_RO_ATTR(function_row_physmap);
 
 static struct attribute *atkbd_attributes[] = {
 	&atkbd_attr_extra.attr,
@@ -292,11 +302,42 @@ static struct attribute *atkbd_attributes[] = {
 	&atkbd_attr_softrepeat.attr,
 	&atkbd_attr_softraw.attr,
 	&atkbd_attr_err_count.attr,
+	&atkbd_attr_function_row_physmap.attr,
 	NULL
 };
 
+static ssize_t atkbd_show_function_row_physmap(struct atkbd *atkbd, char *buf)
+{
+	ssize_t size = 0;
+	int i;
+
+	if (!atkbd->num_function_row_keys)
+		return 0;
+
+	for (i = 0; i < atkbd->num_function_row_keys; i++)
+		size += scnprintf(buf + size, PAGE_SIZE - size, "%02X ",
+				  atkbd->function_row_physmap[i]);
+	size += scnprintf(buf + size, PAGE_SIZE - size, "\n");
+	return size;
+}
+
+static umode_t atkbd_attr_is_visible(struct kobject *kobj,
+				struct attribute *attr, int i)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct serio *serio = to_serio_port(dev);
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+
+	if (attr == &atkbd_attr_function_row_physmap.attr &&
+	    !atkbd->num_function_row_keys)
+		return 0;
+
+	return attr->mode;
+}
+
 static struct attribute_group atkbd_attribute_group = {
 	.attrs	= atkbd_attributes,
+	.is_visible = atkbd_attr_is_visible,
 };
 
 static const unsigned int xl_table[] = {
@@ -994,6 +1035,39 @@ static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
 	return code;
 }
 
+static int atkbd_get_keymap_from_fwnode(struct atkbd *atkbd)
+{
+	struct device *dev = &atkbd->ps2dev.serio->dev;
+	int i, n;
+	u32 *ptr;
+	u16 scancode, keycode;
+
+	/* Parse "linux,keymap" property */
+	n = device_property_count_u32(dev, "linux,keymap");
+	if (n <= 0 || n > ATKBD_KEYMAP_SIZE)
+		return -ENXIO;
+
+	ptr = kcalloc(n, sizeof(u32), GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	if (device_property_read_u32_array(dev, "linux,keymap", ptr, n)) {
+		dev_err(dev, "problem parsing FW keymap property\n");
+		kfree(ptr);
+		return -EINVAL;
+	}
+
+	memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
+	for (i = 0; i < n; i++) {
+		scancode = SCANCODE(ptr[i]);
+		keycode = KEYCODE(ptr[i]);
+		atkbd->keycode[scancode] = keycode;
+	}
+
+	kfree(ptr);
+	return 0;
+}
+
 /*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
@@ -1001,13 +1075,16 @@ static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
 
 static void atkbd_set_keycode_table(struct atkbd *atkbd)
 {
+	struct device *dev = &atkbd->ps2dev.serio->dev;
 	unsigned int scancode;
 	int i, j;
 
 	memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
 	bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE);
 
-	if (atkbd->translated) {
+	if (!atkbd_get_keymap_from_fwnode(atkbd)) {
+		dev_dbg(dev, "Using FW keymap\n");
+	} else if (atkbd->translated) {
 		for (i = 0; i < 128; i++) {
 			scancode = atkbd_unxlate_table[i];
 			atkbd->keycode[i] = atkbd_set2_keycode[scancode];
@@ -1121,6 +1198,22 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd)
 	}
 }
 
+static void atkbd_parse_fwnode_data(struct serio *serio)
+{
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+	struct device *dev = &serio->dev;
+	int n;
+
+	/* Parse "function-row-physmap" property */
+	n = device_property_count_u32(dev, "function-row-physmap");
+	if (n > 0 && n <= MAX_FUNCTION_ROW_KEYS &&
+	    !device_property_read_u32_array(dev, "function-row-physmap",
+					    atkbd->function_row_physmap, n)) {
+		atkbd->num_function_row_keys = n;
+		dev_dbg(dev, "FW reported %d function-row key locations\n", n);
+	}
+}
+
 /*
  * atkbd_connect() is called when the serio module finds an interface
  * that isn't handled yet by an appropriate device driver. We check if
@@ -1184,6 +1277,8 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 		atkbd->id = 0xab00;
 	}
 
+	atkbd_parse_fwnode_data(serio);
+
 	atkbd_set_keycode_table(atkbd);
 	atkbd_set_device_attrs(atkbd);
 
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index 2b71c5a51f90..fc1793ca2f17 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -347,18 +347,14 @@ static int cros_ec_keyb_info(struct cros_ec_device *ec_dev,
 	params->info_type = info_type;
 	params->event_type = event_type;
 
-	ret = cros_ec_cmd_xfer(ec_dev, msg);
-	if (ret < 0) {
-		dev_warn(ec_dev->dev, "Transfer error %d/%d: %d\n",
-			 (int)info_type, (int)event_type, ret);
-	} else if (msg->result == EC_RES_INVALID_VERSION) {
+	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
+	if (ret == -ENOTSUPP) {
 		/* With older ECs we just return 0 for everything */
 		memset(result, 0, result_size);
 		ret = 0;
-	} else if (msg->result != EC_RES_SUCCESS) {
-		dev_warn(ec_dev->dev, "Error getting info %d/%d: %d\n",
-			 (int)info_type, (int)event_type, msg->result);
-		ret = -EPROTO;
+	} else if (ret < 0) {
+		dev_warn(ec_dev->dev, "Transfer error %d/%d: %d\n",
+			 (int)info_type, (int)event_type, ret);
 	} else if (ret != result_size) {
 		dev_warn(ec_dev->dev, "Wrong size %d/%d: %d != %zu\n",
 			 (int)info_type, (int)event_type,
diff --git a/drivers/input/keyboard/dlink-dir685-touchkeys.c b/drivers/input/keyboard/dlink-dir685-touchkeys.c
index b0ead7199c40..a69dcc3bd30c 100644
--- a/drivers/input/keyboard/dlink-dir685-touchkeys.c
+++ b/drivers/input/keyboard/dlink-dir685-touchkeys.c
@@ -143,7 +143,7 @@ MODULE_DEVICE_TABLE(of, dir685_tk_of_match);
 
 static struct i2c_driver dir685_tk_i2c_driver = {
 	.driver = {
-		.name	= "dlin-dir685-touchkeys",
+		.name	= "dlink-dir685-touchkeys",
 		.of_match_table = of_match_ptr(dir685_tk_of_match),
 	},
 	.probe		= dir685_tk_probe,
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 21758767ccf0..9b0f9665dcb0 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -374,5 +374,5 @@ static void __exit tca6416_keypad_exit(void)
 module_exit(tca6416_keypad_exit);
 
 MODULE_AUTHOR("Sriramakrishnan <srk@ti.com>");
-MODULE_DESCRIPTION("Keypad driver over tca6146 IO expander");
+MODULE_DESCRIPTION("Keypad driver over tca6416 IO expander");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7e2e658d551c..293e55fb7a4e 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -265,17 +265,6 @@ config INPUT_APANEL
 	 To compile this driver as a module, choose M here: the module will
 	 be called apanel.
 
-config INPUT_GP2A
-	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
-	depends on I2C
-	depends on GPIOLIB || COMPILE_TEST
-	help
-	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
-	  hooked to an I2C bus.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called gp2ap002a00f.
-
 config INPUT_GPIO_BEEPER
 	tristate "Generic GPIO Beeper support"
 	depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 8fd187f314bd..1db1815ce803 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_INPUT_E3X0_BUTTON)		+= e3x0-button.o
 obj-$(CONFIG_INPUT_DRV260X_HAPTICS)	+= drv260x.o
 obj-$(CONFIG_INPUT_DRV2665_HAPTICS)	+= drv2665.o
 obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
-obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
 obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o
 obj-$(CONFIG_INPUT_GPIO_DECODER)	+= gpio_decoder.o
 obj-$(CONFIG_INPUT_GPIO_VIBRA)		+= gpio-vibra.o
diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
deleted file mode 100644
index 90abda8eea67..000000000000
--- a/drivers/input/misc/gp2ap002a00f.c
+++ /dev/null
@@ -1,281 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
- *
- * Author: Courtney Cavin <courtney.cavin@sonyericsson.com>
- * Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/input/gp2ap002a00f.h>
-
-struct gp2a_data {
-	struct input_dev *input;
-	const struct gp2a_platform_data *pdata;
-	struct i2c_client *i2c_client;
-};
-
-enum gp2a_addr {
-	GP2A_ADDR_PROX	= 0x0,
-	GP2A_ADDR_GAIN	= 0x1,
-	GP2A_ADDR_HYS	= 0x2,
-	GP2A_ADDR_CYCLE	= 0x3,
-	GP2A_ADDR_OPMOD	= 0x4,
-	GP2A_ADDR_CON	= 0x6
-};
-
-enum gp2a_controls {
-	/* Software Shutdown control: 0 = shutdown, 1 = normal operation */
-	GP2A_CTRL_SSD	= 0x01
-};
-
-static int gp2a_report(struct gp2a_data *dt)
-{
-	int vo = gpio_get_value(dt->pdata->vout_gpio);
-
-	input_report_switch(dt->input, SW_FRONT_PROXIMITY, !vo);
-	input_sync(dt->input);
-
-	return 0;
-}
-
-static irqreturn_t gp2a_irq(int irq, void *handle)
-{
-	struct gp2a_data *dt = handle;
-
-	gp2a_report(dt);
-
-	return IRQ_HANDLED;
-}
-
-static int gp2a_enable(struct gp2a_data *dt)
-{
-	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
-					 GP2A_CTRL_SSD);
-}
-
-static int gp2a_disable(struct gp2a_data *dt)
-{
-	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
-					 0x00);
-}
-
-static int gp2a_device_open(struct input_dev *dev)
-{
-	struct gp2a_data *dt = input_get_drvdata(dev);
-	int error;
-
-	error = gp2a_enable(dt);
-	if (error < 0) {
-		dev_err(&dt->i2c_client->dev,
-			"unable to activate, err %d\n", error);
-		return error;
-	}
-
-	gp2a_report(dt);
-
-	return 0;
-}
-
-static void gp2a_device_close(struct input_dev *dev)
-{
-	struct gp2a_data *dt = input_get_drvdata(dev);
-	int error;
-
-	error = gp2a_disable(dt);
-	if (error < 0)
-		dev_err(&dt->i2c_client->dev,
-			"unable to deactivate, err %d\n", error);
-}
-
-static int gp2a_initialize(struct gp2a_data *dt)
-{
-	int error;
-
-	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
-					  0x08);
-	if (error < 0)
-		return error;
-
-	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
-					  0xc2);
-	if (error < 0)
-		return error;
-
-	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
-					  0x04);
-	if (error < 0)
-		return error;
-
-	error = gp2a_disable(dt);
-
-	return error;
-}
-
-static int gp2a_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
-{
-	const struct gp2a_platform_data *pdata = dev_get_platdata(&client->dev);
-	struct gp2a_data *dt;
-	int error;
-
-	if (!pdata)
-		return -EINVAL;
-
-	if (pdata->hw_setup) {
-		error = pdata->hw_setup(client);
-		if (error < 0)
-			return error;
-	}
-
-	error = gpio_request_one(pdata->vout_gpio, GPIOF_IN, GP2A_I2C_NAME);
-	if (error)
-		goto err_hw_shutdown;
-
-	dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
-	if (!dt) {
-		error = -ENOMEM;
-		goto err_free_gpio;
-	}
-
-	dt->pdata = pdata;
-	dt->i2c_client = client;
-
-	error = gp2a_initialize(dt);
-	if (error < 0)
-		goto err_free_mem;
-
-	dt->input = input_allocate_device();
-	if (!dt->input) {
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
-
-	input_set_drvdata(dt->input, dt);
-
-	dt->input->open = gp2a_device_open;
-	dt->input->close = gp2a_device_close;
-	dt->input->name = GP2A_I2C_NAME;
-	dt->input->id.bustype = BUS_I2C;
-	dt->input->dev.parent = &client->dev;
-
-	input_set_capability(dt->input, EV_SW, SW_FRONT_PROXIMITY);
-
-	error = request_threaded_irq(client->irq, NULL, gp2a_irq,
-			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-				IRQF_ONESHOT,
-			GP2A_I2C_NAME, dt);
-	if (error) {
-		dev_err(&client->dev, "irq request failed\n");
-		goto err_free_input_dev;
-	}
-
-	error = input_register_device(dt->input);
-	if (error) {
-		dev_err(&client->dev, "device registration failed\n");
-		goto err_free_irq;
-	}
-
-	device_init_wakeup(&client->dev, pdata->wakeup);
-	i2c_set_clientdata(client, dt);
-
-	return 0;
-
-err_free_irq:
-	free_irq(client->irq, dt);
-err_free_input_dev:
-	input_free_device(dt->input);
-err_free_mem:
-	kfree(dt);
-err_free_gpio:
-	gpio_free(pdata->vout_gpio);
-err_hw_shutdown:
-	if (pdata->hw_shutdown)
-		pdata->hw_shutdown(client);
-	return error;
-}
-
-static int gp2a_remove(struct i2c_client *client)
-{
-	struct gp2a_data *dt = i2c_get_clientdata(client);
-	const struct gp2a_platform_data *pdata = dt->pdata;
-
-	free_irq(client->irq, dt);
-
-	input_unregister_device(dt->input);
-	kfree(dt);
-
-	gpio_free(pdata->vout_gpio);
-
-	if (pdata->hw_shutdown)
-		pdata->hw_shutdown(client);
-
-	return 0;
-}
-
-static int __maybe_unused gp2a_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct gp2a_data *dt = i2c_get_clientdata(client);
-	int retval = 0;
-
-	if (device_may_wakeup(&client->dev)) {
-		enable_irq_wake(client->irq);
-	} else {
-		mutex_lock(&dt->input->mutex);
-		if (dt->input->users)
-			retval = gp2a_disable(dt);
-		mutex_unlock(&dt->input->mutex);
-	}
-
-	return retval;
-}
-
-static int __maybe_unused gp2a_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct gp2a_data *dt = i2c_get_clientdata(client);
-	int retval = 0;
-
-	if (device_may_wakeup(&client->dev)) {
-		disable_irq_wake(client->irq);
-	} else {
-		mutex_lock(&dt->input->mutex);
-		if (dt->input->users)
-			retval = gp2a_enable(dt);
-		mutex_unlock(&dt->input->mutex);
-	}
-
-	return retval;
-}
-
-static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
-
-static const struct i2c_device_id gp2a_i2c_id[] = {
-	{ GP2A_I2C_NAME, 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, gp2a_i2c_id);
-
-static struct i2c_driver gp2a_i2c_driver = {
-	.driver = {
-		.name	= GP2A_I2C_NAME,
-		.pm	= &gp2a_pm,
-	},
-	.probe		= gp2a_probe,
-	.remove		= gp2a_remove,
-	.id_table	= gp2a_i2c_id,
-};
-
-module_i2c_driver(gp2a_i2c_driver);
-
-MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>");
-MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 190b9974526b..258d5fe3d395 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -205,7 +205,7 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
 
 	if (count) {
 		kfree(attn_data.data);
-		attn_data.data = NULL;
+		drvdata->attn_data.data = NULL;
 	}
 
 	if (!kfifo_is_empty(&drvdata->attn_fifo))
@@ -1210,7 +1210,8 @@ static int rmi_driver_probe(struct device *dev)
 	if (data->input) {
 		rmi_driver_set_input_name(rmi_dev, data->input);
 		if (!rmi_dev->xport->input) {
-			if (input_register_device(data->input)) {
+			retval = input_register_device(data->input);
+			if (retval) {
 				dev_err(dev, "%s: Failed to register input device.\n",
 					__func__);
 				goto err_destroy_functions;
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 08e919dbeb5d..7b08ff8ddf35 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -662,6 +662,13 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"),
 		},
 	},
+	{
+		/* Lenovo ThinkPad Twist S230u */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
+		},
+	},
 	{ }
 };
 
@@ -938,6 +945,7 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *
 	}
 	i8042_pnp_id_to_string(dev->id, i8042_kbd_firmware_id,
 			       sizeof(i8042_kbd_firmware_id));
+	i8042_kbd_fwnode = dev_fwnode(&dev->dev);
 
 	/* Keyboard ports are always supposed to be wakeup-enabled */
 	device_set_wakeup_enable(&dev->dev, true);
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 20ff2bed3917..0dddf273afd9 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -21,6 +21,7 @@
 #include <linux/i8042.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <linux/property.h>
 
 #include <asm/io.h>
 
@@ -124,6 +125,7 @@ MODULE_PARM_DESC(unmask_kbd_data, "Unconditional enable (may reveal sensitive da
 static bool i8042_bypass_aux_irq_test;
 static char i8042_kbd_firmware_id[128];
 static char i8042_aux_firmware_id[128];
+static struct fwnode_handle *i8042_kbd_fwnode;
 
 #include "i8042.h"
 
@@ -1335,6 +1337,7 @@ static int __init i8042_create_kbd_port(void)
 	strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
 	strlcpy(serio->firmware_id, i8042_kbd_firmware_id,
 		sizeof(serio->firmware_id));
+	set_primary_fwnode(&serio->dev, i8042_kbd_fwnode);
 
 	port->serio = serio;
 	port->irq = I8042_KBD_IRQ;
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 14c577c16b16..2289f9638116 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -19,6 +19,7 @@
  */
 
 
+#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
@@ -73,6 +74,7 @@
 #define FW_POS_STATE		1
 #define FW_POS_TOTAL		2
 #define FW_POS_XY		3
+#define FW_POS_TOOL_TYPE	33
 #define FW_POS_CHECKSUM		34
 #define FW_POS_WIDTH		35
 #define FW_POS_PRESSURE		45
@@ -842,6 +844,7 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
 {
 	struct input_dev *input = ts->input;
 	unsigned int n_fingers;
+	unsigned int tool_type;
 	u16 finger_state;
 	int i;
 
@@ -852,6 +855,10 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
 	dev_dbg(&ts->client->dev,
 		"n_fingers: %u, state: %04x\n",  n_fingers, finger_state);
 
+	/* Note: all fingers have the same tool type */
+	tool_type = buf[FW_POS_TOOL_TYPE] & BIT(0) ?
+			MT_TOOL_FINGER : MT_TOOL_PALM;
+
 	for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
 		if (finger_state & 1) {
 			unsigned int x, y, p, w;
@@ -867,7 +874,7 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
 				i, x, y, p, w);
 
 			input_mt_slot(input, i);
-			input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+			input_mt_report_slot_state(input, tool_type, true);
 			input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
 			input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
 			input_event(input, EV_ABS, ABS_MT_PRESSURE, p);
@@ -1307,6 +1314,8 @@ static int elants_i2c_probe(struct i2c_client *client,
 	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
 	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE,
+			     0, MT_TOOL_PALM, 0, 0);
 	input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
 	input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
 	input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 69c6d559eeb0..5bdf4ac1a303 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -54,6 +54,7 @@
 enum mms_type {
 	TYPE_MMS114	= 114,
 	TYPE_MMS152	= 152,
+	TYPE_MMS345L	= 345,
 };
 
 struct mms114_data {
@@ -91,15 +92,15 @@ static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,
 	if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL)
 		BUG();
 
-	/* Write register: use repeated start */
+	/* Write register */
 	xfer[0].addr = client->addr;
-	xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART;
+	xfer[0].flags = client->flags & I2C_M_TEN;
 	xfer[0].len = 1;
 	xfer[0].buf = &buf;
 
 	/* Read data */
 	xfer[1].addr = client->addr;
-	xfer[1].flags = I2C_M_RD;
+	xfer[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD;
 	xfer[1].len = len;
 	xfer[1].buf = val;
 
@@ -250,6 +251,15 @@ static int mms114_get_version(struct mms114_data *data)
 	int error;
 
 	switch (data->type) {
+	case TYPE_MMS345L:
+		error = __mms114_read_reg(data, MMS152_FW_REV, 3, buf);
+		if (error)
+			return error;
+
+		dev_info(dev, "TSP FW Rev: bootloader 0x%x / core 0x%x / config 0x%x\n",
+			 buf[0], buf[1], buf[2]);
+		break;
+
 	case TYPE_MMS152:
 		error = __mms114_read_reg(data, MMS152_FW_REV, 3, buf);
 		if (error)
@@ -287,8 +297,8 @@ static int mms114_setup_regs(struct mms114_data *data)
 	if (error < 0)
 		return error;
 
-	/* MMS152 has no configuration or power on registers */
-	if (data->type == TYPE_MMS152)
+	/* Only MMS114 has configuration and power on registers */
+	if (data->type != TYPE_MMS114)
 		return 0;
 
 	error = mms114_set_active(data, true);
@@ -428,10 +438,8 @@ static int mms114_probe(struct i2c_client *client,
 	const void *match_data;
 	int error;
 
-	if (!i2c_check_functionality(client->adapter,
-				I2C_FUNC_PROTOCOL_MANGLING)) {
-		dev_err(&client->dev,
-			"Need i2c bus that supports protocol mangling\n");
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "Not supported I2C adapter\n");
 		return -ENODEV;
 	}
 
@@ -599,6 +607,9 @@ static const struct of_device_id mms114_dt_match[] = {
 	}, {
 		.compatible = "melfas,mms152",
 		.data = (void *)TYPE_MMS152,
+	}, {
+		.compatible = "melfas,mms345l",
+		.data = (void *)TYPE_MMS345L,
 	},
 	{ }
 };
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 16d70201de4a..397cb1d3f481 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -182,6 +182,7 @@ static const struct usb_device_id usbtouch_devices[] = {
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+	{USB_DEVICE(0x255e, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES},
diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
index a03c6d6833df..96fb9ff5ff2e 100644
--- a/drivers/interconnect/qcom/osm-l3.c
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -78,7 +78,7 @@ static struct qcom_icc_node *sdm845_osm_l3_nodes[] = {
 	[SLAVE_OSM_L3] = &sdm845_osm_l3,
 };
 
-const static struct qcom_icc_desc sdm845_icc_osm_l3 = {
+static const struct qcom_icc_desc sdm845_icc_osm_l3 = {
 	.nodes = sdm845_osm_l3_nodes,
 	.num_nodes = ARRAY_SIZE(sdm845_osm_l3_nodes),
 };
@@ -91,7 +91,7 @@ static struct qcom_icc_node *sc7180_osm_l3_nodes[] = {
 	[SLAVE_OSM_L3] = &sc7180_osm_l3,
 };
 
-const static struct qcom_icc_desc sc7180_icc_osm_l3 = {
+static const struct qcom_icc_desc sc7180_icc_osm_l3 = {
 	.nodes = sc7180_osm_l3_nodes,
 	.num_nodes = ARRAY_SIZE(sc7180_osm_l3_nodes),
 };
diff --git a/drivers/interconnect/qcom/sdm845.c b/drivers/interconnect/qcom/sdm845.c
index b013b80caa45..f6c7b969520d 100644
--- a/drivers/interconnect/qcom/sdm845.c
+++ b/drivers/interconnect/qcom/sdm845.c
@@ -192,7 +192,7 @@ static struct qcom_icc_node *aggre1_noc_nodes[] = {
 	[SLAVE_ANOC_PCIE_A1NOC_SNOC] = &qns_pcie_a1noc_snoc,
 };
 
-const static struct qcom_icc_desc sdm845_aggre1_noc = {
+static const struct qcom_icc_desc sdm845_aggre1_noc = {
 	.nodes = aggre1_noc_nodes,
 	.num_nodes = ARRAY_SIZE(aggre1_noc_nodes),
 	.bcms = aggre1_noc_bcms,
@@ -220,7 +220,7 @@ static struct qcom_icc_node *aggre2_noc_nodes[] = {
 	[SLAVE_SERVICE_A2NOC] = &srvc_aggre2_noc,
 };
 
-const static struct qcom_icc_desc sdm845_aggre2_noc = {
+static const struct qcom_icc_desc sdm845_aggre2_noc = {
 	.nodes = aggre2_noc_nodes,
 	.num_nodes = ARRAY_SIZE(aggre2_noc_nodes),
 	.bcms = aggre2_noc_bcms,
@@ -281,7 +281,7 @@ static struct qcom_icc_node *config_noc_nodes[] = {
 	[SLAVE_SERVICE_CNOC] = &srvc_cnoc,
 };
 
-const static struct qcom_icc_desc sdm845_config_noc = {
+static const struct qcom_icc_desc sdm845_config_noc = {
 	.nodes = config_noc_nodes,
 	.num_nodes = ARRAY_SIZE(config_noc_nodes),
 	.bcms = config_noc_bcms,
@@ -297,7 +297,7 @@ static struct qcom_icc_node *dc_noc_nodes[] = {
 	[SLAVE_MEM_NOC_CFG] = &qhs_memnoc,
 };
 
-const static struct qcom_icc_desc sdm845_dc_noc = {
+static const struct qcom_icc_desc sdm845_dc_noc = {
 	.nodes = dc_noc_nodes,
 	.num_nodes = ARRAY_SIZE(dc_noc_nodes),
 	.bcms = dc_noc_bcms,
@@ -315,7 +315,7 @@ static struct qcom_icc_node *gladiator_noc_nodes[] = {
 	[SLAVE_SERVICE_GNOC] = &srvc_gnoc,
 };
 
-const static struct qcom_icc_desc sdm845_gladiator_noc = {
+static const struct qcom_icc_desc sdm845_gladiator_noc = {
 	.nodes = gladiator_noc_nodes,
 	.num_nodes = ARRAY_SIZE(gladiator_noc_nodes),
 	.bcms = gladiator_noc_bcms,
@@ -350,7 +350,7 @@ static struct qcom_icc_node *mem_noc_nodes[] = {
 	[SLAVE_EBI1] = &ebi,
 };
 
-const static struct qcom_icc_desc sdm845_mem_noc = {
+static const struct qcom_icc_desc sdm845_mem_noc = {
 	.nodes = mem_noc_nodes,
 	.num_nodes = ARRAY_SIZE(mem_noc_nodes),
 	.bcms = mem_noc_bcms,
@@ -384,7 +384,7 @@ static struct qcom_icc_node *mmss_noc_nodes[] = {
 	[SLAVE_CAMNOC_UNCOMP] = &qns_camnoc_uncomp,
 };
 
-const static struct qcom_icc_desc sdm845_mmss_noc = {
+static const struct qcom_icc_desc sdm845_mmss_noc = {
 	.nodes = mmss_noc_nodes,
 	.num_nodes = ARRAY_SIZE(mmss_noc_nodes),
 	.bcms = mmss_noc_bcms,
@@ -430,7 +430,7 @@ static struct qcom_icc_node *system_noc_nodes[] = {
 	[SLAVE_TCU] = &xs_sys_tcu_cfg,
 };
 
-const static struct qcom_icc_desc sdm845_system_noc = {
+static const struct qcom_icc_desc sdm845_system_noc = {
 	.nodes = system_noc_nodes,
 	.num_nodes = ARRAY_SIZE(system_noc_nodes),
 	.bcms = system_noc_bcms,
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index ba128d1cdaee..4959f5df21bd 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -952,7 +952,7 @@ static void __iommu_dma_free(struct device *dev, size_t size, void *cpu_addr)
 
 	/* Non-coherent atomic allocation? Easy */
 	if (IS_ENABLED(CONFIG_DMA_DIRECT_REMAP) &&
-	    dma_free_from_pool(cpu_addr, alloc_size))
+	    dma_free_from_pool(dev, cpu_addr, alloc_size))
 		return;
 
 	if (IS_ENABLED(CONFIG_DMA_REMAP) && is_vmalloc_addr(cpu_addr)) {
@@ -1035,7 +1035,8 @@ static void *iommu_dma_alloc(struct device *dev, size_t size,
 
 	if (IS_ENABLED(CONFIG_DMA_DIRECT_REMAP) &&
 	    !gfpflags_allow_blocking(gfp) && !coherent)
-		cpu_addr = dma_alloc_from_pool(PAGE_ALIGN(size), &page, gfp);
+		cpu_addr = dma_alloc_from_pool(dev, PAGE_ALIGN(size), &page,
+					       gfp);
 	else
 		cpu_addr = iommu_dma_alloc_pages(dev, size, &page, gfp, attrs);
 	if (!cpu_addr)
diff --git a/drivers/iommu/s390-iommu.c b/drivers/iommu/s390-iommu.c
index 1137f3ddcb85..c60d5c776fc6 100644
--- a/drivers/iommu/s390-iommu.c
+++ b/drivers/iommu/s390-iommu.c
@@ -87,7 +87,7 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 				    struct device *dev)
 {
 	struct s390_domain *s390_domain = to_s390_domain(domain);
-	struct zpci_dev *zdev = to_pci_dev(dev)->sysdata;
+	struct zpci_dev *zdev = to_zpci_dev(dev);
 	struct s390_domain_device *domain_device;
 	unsigned long flags;
 	int rc;
@@ -139,7 +139,7 @@ static void s390_iommu_detach_device(struct iommu_domain *domain,
 				     struct device *dev)
 {
 	struct s390_domain *s390_domain = to_s390_domain(domain);
-	struct zpci_dev *zdev = to_pci_dev(dev)->sysdata;
+	struct zpci_dev *zdev = to_zpci_dev(dev);
 	struct s390_domain_device *domain_device, *tmp;
 	unsigned long flags;
 	int found = 0;
@@ -169,7 +169,7 @@ static void s390_iommu_detach_device(struct iommu_domain *domain,
 static int s390_iommu_add_device(struct device *dev)
 {
 	struct iommu_group *group = iommu_group_get_for_dev(dev);
-	struct zpci_dev *zdev = to_pci_dev(dev)->sysdata;
+	struct zpci_dev *zdev = to_zpci_dev(dev);
 
 	if (IS_ERR(group))
 		return PTR_ERR(group);
@@ -182,7 +182,7 @@ static int s390_iommu_add_device(struct device *dev)
 
 static void s390_iommu_remove_device(struct device *dev)
 {
-	struct zpci_dev *zdev = to_pci_dev(dev)->sysdata;
+	struct zpci_dev *zdev = to_zpci_dev(dev);
 	struct iommu_domain *domain;
 
 	/*
diff --git a/drivers/irqchip/irq-renesas-h8300h.c b/drivers/irqchip/irq-renesas-h8300h.c
index 1054d74b7edd..42e2918eee2f 100644
--- a/drivers/irqchip/irq-renesas-h8300h.c
+++ b/drivers/irqchip/irq-renesas-h8300h.c
@@ -24,7 +24,10 @@ static const char ipr_bit[] = {
 
 static void __iomem *intc_baseaddr;
 
-#define IPR (intc_baseaddr + 6)
+#define ICSR (intc_baseaddr + 2)
+#define IER  (intc_baseaddr + 3)
+#define ISR  (intc_baseaddr + 4)
+#define IPR  (intc_baseaddr + 6)
 
 static void h8300h_disable_irq(struct irq_data *data)
 {
@@ -38,6 +41,8 @@ static void h8300h_disable_irq(struct irq_data *data)
 		else
 			ctrl_bclr(bit & 7, (IPR+1));
 	}
+	if (irq < 6)
+		ctrl_bclr(irq, IER);
 }
 
 static void h8300h_enable_irq(struct irq_data *data)
@@ -52,12 +57,24 @@ static void h8300h_enable_irq(struct irq_data *data)
 		else
 			ctrl_bset(bit & 7, (IPR+1));
 	}
+	if (irq < 6)
+		ctrl_bset(irq, IER);
+}
+
+static void h8300h_ack_irq(struct irq_data *data)
+{
+	int bit;
+	int irq = data->irq - 12;
+
+	if (irq < 6)
+		ctrl_bclr(irq, ISR);
 }
 
 struct irq_chip h8300h_irq_chip = {
 	.name		= "H8/300H-INTC",
 	.irq_enable	= h8300h_enable_irq,
 	.irq_disable	= h8300h_disable_irq,
+	.irq_eoi	= h8300h_ack_irq,
 };
 
 static int irq_map(struct irq_domain *h, unsigned int virq,
diff --git a/drivers/irqchip/irq-renesas-h8s.c b/drivers/irqchip/irq-renesas-h8s.c
index 4e2461bae944..0b8d9d7ef2ee 100644
--- a/drivers/irqchip/irq-renesas-h8s.c
+++ b/drivers/irqchip/irq-renesas-h8s.c
@@ -11,8 +11,11 @@
 #include <linux/of_irq.h>
 #include <asm/io.h>
 
-static void *intc_baseaddr;
-#define IPRA (intc_baseaddr)
+static void *ipr_base;
+static void *icr_base;
+#define IPRA (ipr_base)
+#define IER  (icr_base + 2)
+#define ISR  (icr_base + 4)
 
 static const unsigned char ipr_table[] = {
 	0x03, 0x02, 0x01, 0x00, 0x13, 0x12, 0x11, 0x10, /* 16 - 23 */
@@ -36,13 +39,22 @@ static void h8s_disable_irq(struct irq_data *data)
 	int pos;
 	void __iomem *addr;
 	unsigned short pri;
-	int irq = data->irq;
+	int irq = data->irq - 16;
+	unsigned short ier;
+
+	if (irq < 0)
+		return;
 
-	addr = IPRA + ((ipr_table[irq - 16] & 0xf0) >> 3);
-	pos = (ipr_table[irq - 16] & 0x0f) * 4;
+	addr = IPRA + ((ipr_table[irq] & 0xf0) >> 3);
+	pos = (ipr_table[irq] & 0x0f) * 4;
 	pri = ~(0x000f << pos);
-	pri &= readw(addr);
-	writew(pri, addr);
+	pri &= __raw_readw(addr);
+	__raw_writew(pri, addr);
+	if (irq < 16) {
+		ier = __raw_readw(IER);
+		ier &= ~(1 << irq);
+		__raw_writew(ier, IER);
+	}
 }
 
 static void h8s_enable_irq(struct irq_data *data)
@@ -50,20 +62,43 @@ static void h8s_enable_irq(struct irq_data *data)
 	int pos;
 	void __iomem *addr;
 	unsigned short pri;
-	int irq = data->irq;
+	int irq = data->irq - 16;
+	unsigned short ier;
+
+	if (irq < 0)
+		return;
 
-	addr = IPRA + ((ipr_table[irq - 16] & 0xf0) >> 3);
-	pos = (ipr_table[irq - 16] & 0x0f) * 4;
+	addr = IPRA + ((ipr_table[irq] & 0xf0) >> 3);
+	pos = (ipr_table[irq] & 0x0f) * 4;
 	pri = ~(0x000f << pos);
-	pri &= readw(addr);
+	pri &= __raw_readw(addr);
 	pri |= 1 << pos;
-	writew(pri, addr);
+	__raw_writew(pri, addr);
+	if (irq < 16) {
+		ier = __raw_readw(IER);
+		ier &= ~(1 << irq);
+		__raw_writew(ier, IER);
+	}
+}
+
+static void h8s_ack_irq(struct irq_data *data)
+{
+	int irq = data->irq;
+	uint16_t isr;
+
+	if (irq >= 16 && irq < 32) {
+		irq -= 16;
+		isr = __raw_readw(ISR);
+		isr &= ~(1 << irq);
+		__raw_writew(isr, ISR);
+	}
 }
 
 struct irq_chip h8s_irq_chip = {
 	.name		= "H8S-INTC",
 	.irq_enable	= h8s_enable_irq,
 	.irq_disable	= h8s_disable_irq,
+	.irq_ack	= h8s_ack_irq,
 };
 
 static __init int irq_map(struct irq_domain *h, unsigned int virq,
@@ -85,14 +120,16 @@ static int __init h8s_intc_of_init(struct device_node *intc,
 	struct irq_domain *domain;
 	int n;
 
-	intc_baseaddr = of_iomap(intc, 0);
-	BUG_ON(!intc_baseaddr);
+	ipr_base = of_iomap(intc, 0);
+	icr_base = of_iomap(intc, 1);
+	BUG_ON(!ipr_base || !icr_base);
 
 	/* All interrupt priority is 0 (disable) */
 	/* IPRA to IPRK */
 	for (n = 0; n <= 'k' - 'a'; n++)
-		writew(0x0000, IPRA + (n * 2));
+		__raw_writew(0x0000, IPRA + (n * 2));
 
+	__raw_writew(0xffff, IER);
 	domain = irq_domain_add_linear(intc, NR_IRQS, &irq_ops, NULL);
 	BUG_ON(!domain);
 	irq_set_default_host(domain);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c664d84e1667..9cdc4cfc5d11 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -83,6 +83,17 @@ config LEDS_APU
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-apu.
 
+config LEDS_ARIEL
+	tristate "Dell Wyse 3020 status LED support"
+	depends on LEDS_CLASS
+	depends on (MACH_MMP3_DT && MFD_ENE_KB3930) || COMPILE_TEST
+	help
+	  This driver adds support for controlling the front panel status
+	  LEDs on Dell Wyse 3020 (Ariel) board via the KB3930 Embedded
+	  Controller.
+
+	  Say Y to if your machine is a Dell Wyse 3020 thin client.
+
 config LEDS_AS3645A
 	tristate "AS3645A and LM3555 LED flash controllers support"
 	depends on I2C && LEDS_CLASS_FLASH
@@ -857,6 +868,14 @@ config LEDS_IP30
 	  To compile this driver as a module, choose M here: the module
 	  will be called leds-ip30.
 
+config LEDS_SGM3140
+	tristate "LED support for the SGM3140"
+	depends on LEDS_CLASS_FLASH
+	depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
+	help
+	  This option enables support for the SGM3140 500mA Buck/Boost Charge
+	  Pump LED Driver.
+
 comment "LED Triggers"
 source "drivers/leds/trigger/Kconfig"
 
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 45235d5fb218..d0dff504f108 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_LEDS_AAT1290)		+= leds-aat1290.o
 obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
 obj-$(CONFIG_LEDS_AN30259A)		+= leds-an30259a.o
 obj-$(CONFIG_LEDS_APU)			+= leds-apu.o
+obj-$(CONFIG_LEDS_ARIEL)		+= leds-ariel.o
 obj-$(CONFIG_LEDS_AS3645A)		+= leds-as3645a.o
 obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
 obj-$(CONFIG_LEDS_BCM6328)		+= leds-bcm6328.o
@@ -77,6 +78,7 @@ obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
 obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
 obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
 obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
+obj-$(CONFIG_LEDS_SGM3140)		+= leds-sgm3140.o
 obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
 obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
diff --git a/drivers/leds/leds-ariel.c b/drivers/leds/leds-ariel.c
new file mode 100644
index 000000000000..bb68ba23a7d4
--- /dev/null
+++ b/drivers/leds/leds-ariel.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0-or-later
+/*
+ * Dell Wyse 3020 a.k.a. "Ariel" Embedded Controller LED Driver
+ *
+ * Copyright (C) 2020 Lubomir Rintel
+ */
+
+#include <linux/module.h>
+#include <linux/leds.h>
+#include <linux/regmap.h>
+#include <linux/of_platform.h>
+
+enum ec_index {
+	EC_BLUE_LED	= 0x01,
+	EC_AMBER_LED	= 0x02,
+	EC_GREEN_LED	= 0x03,
+};
+
+enum {
+	EC_LED_OFF	= 0x00,
+	EC_LED_STILL	= 0x01,
+	EC_LED_FADE	= 0x02,
+	EC_LED_BLINK	= 0x03,
+};
+
+struct ariel_led {
+	struct regmap *ec_ram;
+	enum ec_index ec_index;
+	struct led_classdev led_cdev;
+};
+
+#define led_cdev_to_ariel_led(c) container_of(c, struct ariel_led, led_cdev)
+
+static enum led_brightness ariel_led_get(struct led_classdev *led_cdev)
+{
+	struct ariel_led *led = led_cdev_to_ariel_led(led_cdev);
+	unsigned int led_status = 0;
+
+	if (regmap_read(led->ec_ram, led->ec_index, &led_status))
+		return LED_OFF;
+
+	if (led_status == EC_LED_STILL)
+		return LED_FULL;
+	else
+		return LED_OFF;
+}
+
+static void ariel_led_set(struct led_classdev *led_cdev,
+			  enum led_brightness brightness)
+{
+	struct ariel_led *led = led_cdev_to_ariel_led(led_cdev);
+
+	if (brightness == LED_OFF)
+		regmap_write(led->ec_ram, led->ec_index, EC_LED_OFF);
+	else
+		regmap_write(led->ec_ram, led->ec_index, EC_LED_STILL);
+}
+
+static int ariel_blink_set(struct led_classdev *led_cdev,
+			   unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct ariel_led *led = led_cdev_to_ariel_led(led_cdev);
+
+	if (*delay_on == 0 && *delay_off == 0)
+		return -EINVAL;
+
+	if (*delay_on == 0) {
+		regmap_write(led->ec_ram, led->ec_index, EC_LED_OFF);
+	} else if (*delay_off == 0) {
+		regmap_write(led->ec_ram, led->ec_index, EC_LED_STILL);
+	} else {
+		*delay_on = 500;
+		*delay_off = 500;
+		regmap_write(led->ec_ram, led->ec_index, EC_LED_BLINK);
+	}
+
+	return 0;
+}
+
+#define NLEDS 3
+
+static int ariel_led_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ariel_led *leds;
+	struct regmap *ec_ram;
+	int ret;
+	int i;
+
+	ec_ram = dev_get_regmap(dev->parent, "ec_ram");
+	if (!ec_ram)
+		return -ENODEV;
+
+	leds = devm_kcalloc(dev, NLEDS, sizeof(*leds), GFP_KERNEL);
+	if (!leds)
+		return -ENOMEM;
+
+	leds[0].ec_index = EC_BLUE_LED;
+	leds[0].led_cdev.name = "blue:power",
+	leds[0].led_cdev.default_trigger = "default-on";
+
+	leds[1].ec_index = EC_AMBER_LED;
+	leds[1].led_cdev.name = "amber:status",
+
+	leds[2].ec_index = EC_GREEN_LED;
+	leds[2].led_cdev.name = "green:status",
+	leds[2].led_cdev.default_trigger = "default-on";
+
+	for (i = 0; i < NLEDS; i++) {
+		leds[i].ec_ram = ec_ram;
+		leds[i].led_cdev.brightness_get = ariel_led_get;
+		leds[i].led_cdev.brightness_set = ariel_led_set;
+		leds[i].led_cdev.blink_set = ariel_blink_set;
+
+		ret = devm_led_classdev_register(dev, &leds[i].led_cdev);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver ariel_led_driver = {
+	.probe = ariel_led_probe,
+	.driver = {
+		.name = "dell-wyse-ariel-led",
+	},
+};
+module_platform_driver(ariel_led_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("Dell Wyse 3020 Status LEDs Driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
index a5abb499574b..11ce05249751 100644
--- a/drivers/leds/leds-lm355x.c
+++ b/drivers/leds/leds-lm355x.c
@@ -7,7 +7,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
diff --git a/drivers/leds/leds-lp3952.c b/drivers/leds/leds-lp3952.c
index 4e4e542774cb..6ee9131fbf25 100644
--- a/drivers/leds/leds-lp3952.c
+++ b/drivers/leds/leds-lp3952.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c
index c94995f0daa2..9079850e6ea4 100644
--- a/drivers/leds/leds-lt3593.c
+++ b/drivers/leds/leds-lt3593.c
@@ -5,7 +5,6 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c
index 14ef4ccdda3a..ceceeb6a0e96 100644
--- a/drivers/leds/leds-netxbig.c
+++ b/drivers/leds/leds-netxbig.c
@@ -12,16 +12,17 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/leds.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 struct netxbig_gpio_ext {
-	unsigned int	*addr;
+	struct gpio_desc **addr;
 	int		num_addr;
-	unsigned int	*data;
+	struct gpio_desc **data;
 	int		num_data;
-	unsigned int	enable;
+	struct gpio_desc *enable;
 };
 
 enum netxbig_led_mode {
@@ -69,7 +70,7 @@ static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr)
 	int pin;
 
 	for (pin = 0; pin < gpio_ext->num_addr; pin++)
-		gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1);
+		gpiod_set_value(gpio_ext->addr[pin], (addr >> pin) & 1);
 }
 
 static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data)
@@ -77,14 +78,14 @@ static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data)
 	int pin;
 
 	for (pin = 0; pin < gpio_ext->num_data; pin++)
-		gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1);
+		gpiod_set_value(gpio_ext->data[pin], (data >> pin) & 1);
 }
 
 static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext)
 {
 	/* Enable select is done on the raising edge. */
-	gpio_set_value(gpio_ext->enable, 0);
-	gpio_set_value(gpio_ext->enable, 1);
+	gpiod_set_value(gpio_ext->enable, 0);
+	gpiod_set_value(gpio_ext->enable, 1);
 }
 
 static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext,
@@ -99,41 +100,6 @@ static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext,
 	spin_unlock_irqrestore(&gpio_ext_lock, flags);
 }
 
-static int gpio_ext_init(struct platform_device *pdev,
-			 struct netxbig_gpio_ext *gpio_ext)
-{
-	int err;
-	int i;
-
-	if (unlikely(!gpio_ext))
-		return -EINVAL;
-
-	/* Configure address GPIOs. */
-	for (i = 0; i < gpio_ext->num_addr; i++) {
-		err = devm_gpio_request_one(&pdev->dev, gpio_ext->addr[i],
-					    GPIOF_OUT_INIT_LOW,
-					    "GPIO extension addr");
-		if (err)
-			return err;
-	}
-	/* Configure data GPIOs. */
-	for (i = 0; i < gpio_ext->num_data; i++) {
-		err = devm_gpio_request_one(&pdev->dev, gpio_ext->data[i],
-					    GPIOF_OUT_INIT_LOW,
-					    "GPIO extension data");
-		if (err)
-			return err;
-	}
-	/* Configure "enable select" GPIO. */
-	err = devm_gpio_request_one(&pdev->dev, gpio_ext->enable,
-				    GPIOF_OUT_INIT_LOW,
-				    "GPIO extension enable");
-	if (err)
-		return err;
-
-	return 0;
-}
-
 /*
  * Class LED driver.
  */
@@ -347,15 +313,47 @@ static int create_netxbig_led(struct platform_device *pdev,
 	return devm_led_classdev_register(&pdev->dev, &led_dat->cdev);
 }
 
-static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
-				 struct netxbig_gpio_ext *gpio_ext)
+/**
+ * netxbig_gpio_ext_remove() - Clean up GPIO extension data
+ * @data: managed resource data to clean up
+ *
+ * Since we pick GPIO descriptors from another device than the device our
+ * driver is probing to, we need to register a specific callback to free
+ * these up using managed resources.
+ */
+static void netxbig_gpio_ext_remove(void *data)
+{
+	struct netxbig_gpio_ext *gpio_ext = data;
+	int i;
+
+	for (i = 0; i < gpio_ext->num_addr; i++)
+		gpiod_put(gpio_ext->addr[i]);
+	for (i = 0; i < gpio_ext->num_data; i++)
+		gpiod_put(gpio_ext->data[i]);
+	gpiod_put(gpio_ext->enable);
+}
+
+/**
+ * netxbig_gpio_ext_get() - Obtain GPIO extension device data
+ * @dev: main LED device
+ * @gpio_ext_dev: the GPIO extension device
+ * @gpio_ext: the data structure holding the GPIO extension data
+ *
+ * This function walks the subdevice that only contain GPIO line
+ * handles in the device tree and obtains the GPIO descriptors from that
+ * device.
+ */
+static int netxbig_gpio_ext_get(struct device *dev,
+				struct device *gpio_ext_dev,
+				struct netxbig_gpio_ext *gpio_ext)
 {
-	int *addr, *data;
+	struct gpio_desc **addr, **data;
 	int num_addr, num_data;
+	struct gpio_desc *gpiod;
 	int ret;
 	int i;
 
-	ret = of_gpio_named_count(np, "addr-gpios");
+	ret = gpiod_count(gpio_ext_dev, "addr");
 	if (ret < 0) {
 		dev_err(dev,
 			"Failed to count GPIOs in DT property addr-gpios\n");
@@ -366,16 +364,25 @@ static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
 	if (!addr)
 		return -ENOMEM;
 
+	/*
+	 * We cannot use devm_ managed resources with these GPIO descriptors
+	 * since they are associated with the "GPIO extension device" which
+	 * does not probe any driver. The device tree parser will however
+	 * populate a platform device for it so we can anyway obtain the
+	 * GPIO descriptors from the device.
+	 */
 	for (i = 0; i < num_addr; i++) {
-		ret = of_get_named_gpio(np, "addr-gpios", i);
-		if (ret < 0)
-			return ret;
-		addr[i] = ret;
+		gpiod = gpiod_get_index(gpio_ext_dev, "addr", i,
+					GPIOD_OUT_LOW);
+		if (IS_ERR(gpiod))
+			return PTR_ERR(gpiod);
+		gpiod_set_consumer_name(gpiod, "GPIO extension addr");
+		addr[i] = gpiod;
 	}
 	gpio_ext->addr = addr;
 	gpio_ext->num_addr = num_addr;
 
-	ret = of_gpio_named_count(np, "data-gpios");
+	ret = gpiod_count(gpio_ext_dev, "data");
 	if (ret < 0) {
 		dev_err(dev,
 			"Failed to count GPIOs in DT property data-gpios\n");
@@ -387,23 +394,26 @@ static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
 		return -ENOMEM;
 
 	for (i = 0; i < num_data; i++) {
-		ret = of_get_named_gpio(np, "data-gpios", i);
-		if (ret < 0)
-			return ret;
-		data[i] = ret;
+		gpiod = gpiod_get_index(gpio_ext_dev, "data", i,
+					GPIOD_OUT_LOW);
+		if (IS_ERR(gpiod))
+			return PTR_ERR(gpiod);
+		gpiod_set_consumer_name(gpiod, "GPIO extension data");
+		data[i] = gpiod;
 	}
 	gpio_ext->data = data;
 	gpio_ext->num_data = num_data;
 
-	ret = of_get_named_gpio(np, "enable-gpio", 0);
-	if (ret < 0) {
+	gpiod = gpiod_get(gpio_ext_dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod)) {
 		dev_err(dev,
 			"Failed to get GPIO from DT property enable-gpio\n");
-		return ret;
+		return PTR_ERR(gpiod);
 	}
-	gpio_ext->enable = ret;
+	gpiod_set_consumer_name(gpiod, "GPIO extension enable");
+	gpio_ext->enable = gpiod;
 
-	return 0;
+	return devm_add_action_or_reset(dev, netxbig_gpio_ext_remove, gpio_ext);
 }
 
 static int netxbig_leds_get_of_pdata(struct device *dev,
@@ -411,6 +421,8 @@ static int netxbig_leds_get_of_pdata(struct device *dev,
 {
 	struct device_node *np = dev->of_node;
 	struct device_node *gpio_ext_np;
+	struct platform_device *gpio_ext_pdev;
+	struct device *gpio_ext_dev;
 	struct device_node *child;
 	struct netxbig_gpio_ext *gpio_ext;
 	struct netxbig_led_timer *timers;
@@ -426,13 +438,19 @@ static int netxbig_leds_get_of_pdata(struct device *dev,
 		dev_err(dev, "Failed to get DT handle gpio-ext\n");
 		return -EINVAL;
 	}
+	gpio_ext_pdev = of_find_device_by_node(gpio_ext_np);
+	if (!gpio_ext_pdev) {
+		dev_err(dev, "Failed to find platform device for gpio-ext\n");
+		return -ENODEV;
+	}
+	gpio_ext_dev = &gpio_ext_pdev->dev;
 
 	gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL);
 	if (!gpio_ext) {
 		of_node_put(gpio_ext_np);
 		return -ENOMEM;
 	}
-	ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext);
+	ret = netxbig_gpio_ext_get(dev, gpio_ext_dev, gpio_ext);
 	of_node_put(gpio_ext_np);
 	if (ret)
 		return ret;
@@ -585,10 +603,6 @@ static int netxbig_led_probe(struct platform_device *pdev)
 	if (!leds_data)
 		return -ENOMEM;
 
-	ret = gpio_ext_init(pdev, pdata->gpio_ext);
-	if (ret < 0)
-		return ret;
-
 	for (i = 0; i < pdata->num_leds; i++) {
 		ret = create_netxbig_led(pdev, pdata,
 					 &leds_data[i], &pdata->leds[i]);
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index 6c8a724aac51..ef7b91bd2064 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -91,15 +91,21 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
 	pwm_init_state(led_data->pwm, &led_data->pwmstate);
 
 	ret = devm_led_classdev_register(dev, &led_data->cdev);
-	if (ret == 0) {
-		priv->num_leds++;
-		led_pwm_set(&led_data->cdev, led_data->cdev.brightness);
-	} else {
+	if (ret) {
 		dev_err(dev, "failed to register PWM led for %s: %d\n",
 			led->name, ret);
+		return ret;
 	}
 
-	return ret;
+	ret = led_pwm_set(&led_data->cdev, led_data->cdev.brightness);
+	if (ret) {
+		dev_err(dev, "failed to set led PWM value for %s: %d",
+			led->name, ret);
+		return ret;
+	}
+
+	priv->num_leds++;
+	return 0;
 }
 
 static int led_pwm_create_fwnode(struct device *dev, struct led_pwm_priv *priv)
diff --git a/drivers/leds/leds-sgm3140.c b/drivers/leds/leds-sgm3140.c
new file mode 100644
index 000000000000..c494b934ae09
--- /dev/null
+++ b/drivers/leds/leds-sgm3140.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2020 Luca Weiss <luca@z3ntu.xyz>
+
+#include <linux/gpio/consumer.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/platform_device.h>
+
+#include <media/v4l2-flash-led-class.h>
+
+#define FLASH_TIMEOUT_DEFAULT		250000U /* 250ms */
+#define FLASH_MAX_TIMEOUT_DEFAULT	300000U /* 300ms */
+
+struct sgm3140 {
+	struct led_classdev_flash fled_cdev;
+	struct v4l2_flash *v4l2_flash;
+
+	struct timer_list powerdown_timer;
+
+	struct gpio_desc *flash_gpio;
+	struct gpio_desc *enable_gpio;
+	struct regulator *vin_regulator;
+
+	bool enabled;
+
+	/* current timeout in us */
+	u32 timeout;
+	/* maximum timeout in us */
+	u32 max_timeout;
+};
+
+static struct sgm3140 *flcdev_to_sgm3140(struct led_classdev_flash *flcdev)
+{
+	return container_of(flcdev, struct sgm3140, fled_cdev);
+}
+
+static int sgm3140_strobe_set(struct led_classdev_flash *fled_cdev, bool state)
+{
+	struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev);
+	int ret;
+
+	if (priv->enabled == state)
+		return 0;
+
+	if (state) {
+		ret = regulator_enable(priv->vin_regulator);
+		if (ret) {
+			dev_err(fled_cdev->led_cdev.dev,
+				"failed to enable regulator: %d\n", ret);
+			return ret;
+		}
+		gpiod_set_value_cansleep(priv->flash_gpio, 1);
+		gpiod_set_value_cansleep(priv->enable_gpio, 1);
+		mod_timer(&priv->powerdown_timer,
+			  jiffies + usecs_to_jiffies(priv->timeout));
+	} else {
+		del_timer_sync(&priv->powerdown_timer);
+		gpiod_set_value_cansleep(priv->enable_gpio, 0);
+		gpiod_set_value_cansleep(priv->flash_gpio, 0);
+		ret = regulator_disable(priv->vin_regulator);
+		if (ret) {
+			dev_err(fled_cdev->led_cdev.dev,
+				"failed to disable regulator: %d\n", ret);
+			return ret;
+		}
+	}
+
+	priv->enabled = state;
+
+	return 0;
+}
+
+static int sgm3140_strobe_get(struct led_classdev_flash *fled_cdev, bool *state)
+{
+	struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev);
+
+	*state = timer_pending(&priv->powerdown_timer);
+
+	return 0;
+}
+
+static int sgm3140_timeout_set(struct led_classdev_flash *fled_cdev,
+			       u32 timeout)
+{
+	struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev);
+
+	priv->timeout = timeout;
+
+	return 0;
+}
+
+static const struct led_flash_ops sgm3140_flash_ops = {
+	.strobe_set = sgm3140_strobe_set,
+	.strobe_get = sgm3140_strobe_get,
+	.timeout_set = sgm3140_timeout_set,
+};
+
+static int sgm3140_brightness_set(struct led_classdev *led_cdev,
+				  enum led_brightness brightness)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+	struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev);
+	bool enable = brightness == LED_ON;
+	int ret;
+
+	if (priv->enabled == enable)
+		return 0;
+
+	if (enable) {
+		ret = regulator_enable(priv->vin_regulator);
+		if (ret) {
+			dev_err(led_cdev->dev,
+				"failed to enable regulator: %d\n", ret);
+			return ret;
+		}
+		gpiod_set_value_cansleep(priv->enable_gpio, 1);
+	} else {
+		gpiod_set_value_cansleep(priv->enable_gpio, 0);
+		ret = regulator_disable(priv->vin_regulator);
+		if (ret) {
+			dev_err(led_cdev->dev,
+				"failed to disable regulator: %d\n", ret);
+			return ret;
+		}
+	}
+
+	priv->enabled = enable;
+
+	return 0;
+}
+
+static void sgm3140_powerdown_timer(struct timer_list *t)
+{
+	struct sgm3140 *priv = from_timer(priv, t, powerdown_timer);
+
+	gpiod_set_value(priv->enable_gpio, 0);
+	gpiod_set_value(priv->flash_gpio, 0);
+	regulator_disable(priv->vin_regulator);
+
+	priv->enabled = false;
+}
+
+static void sgm3140_init_flash_timeout(struct sgm3140 *priv)
+{
+	struct led_classdev_flash *fled_cdev = &priv->fled_cdev;
+	struct led_flash_setting *s;
+
+	/* Init flash timeout setting */
+	s = &fled_cdev->timeout;
+	s->min = 1;
+	s->max = priv->max_timeout;
+	s->step = 1;
+	s->val = FLASH_TIMEOUT_DEFAULT;
+}
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static void sgm3140_init_v4l2_flash_config(struct sgm3140 *priv,
+					struct v4l2_flash_config *v4l2_sd_cfg)
+{
+	struct led_classdev *led_cdev = &priv->fled_cdev.led_cdev;
+	struct led_flash_setting *s;
+
+	strscpy(v4l2_sd_cfg->dev_name, led_cdev->dev->kobj.name,
+		sizeof(v4l2_sd_cfg->dev_name));
+
+	/* Init flash intensity setting */
+	s = &v4l2_sd_cfg->intensity;
+	s->min = 0;
+	s->max = 1;
+	s->step = 1;
+	s->val = 1;
+}
+
+#else
+static void sgm3140_init_v4l2_flash_config(struct sgm3140 *priv,
+					struct v4l2_flash_config *v4l2_sd_cfg)
+{
+}
+#endif
+
+static int sgm3140_probe(struct platform_device *pdev)
+{
+	struct sgm3140 *priv;
+	struct led_classdev *led_cdev;
+	struct led_classdev_flash *fled_cdev;
+	struct led_init_data init_data = {};
+	struct fwnode_handle *child_node;
+	struct v4l2_flash_config v4l2_sd_cfg = {};
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->flash_gpio = devm_gpiod_get(&pdev->dev, "flash", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(priv->flash_gpio);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Failed to request flash gpio: %d\n", ret);
+		return ret;
+	}
+
+	priv->enable_gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(priv->enable_gpio);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Failed to request enable gpio: %d\n", ret);
+		return ret;
+	}
+
+	priv->vin_regulator = devm_regulator_get(&pdev->dev, "vin");
+	ret = PTR_ERR_OR_ZERO(priv->vin_regulator);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Failed to request regulator: %d\n", ret);
+		return ret;
+	}
+
+	child_node = fwnode_get_next_available_child_node(pdev->dev.fwnode,
+							  NULL);
+	if (!child_node) {
+		dev_err(&pdev->dev,
+			"No fwnode child node found for connected LED.\n");
+		return -EINVAL;
+	}
+
+	ret = fwnode_property_read_u32(child_node, "flash-max-timeout-us",
+				       &priv->max_timeout);
+	if (ret) {
+		priv->max_timeout = FLASH_MAX_TIMEOUT_DEFAULT;
+		dev_warn(&pdev->dev,
+			 "flash-max-timeout-us property missing\n");
+	}
+
+	/*
+	 * Set default timeout to FLASH_DEFAULT_TIMEOUT except if max_timeout
+	 * from DT is lower.
+	 */
+	priv->timeout = min(priv->max_timeout, FLASH_TIMEOUT_DEFAULT);
+
+	timer_setup(&priv->powerdown_timer, sgm3140_powerdown_timer, 0);
+
+	fled_cdev = &priv->fled_cdev;
+	led_cdev = &fled_cdev->led_cdev;
+
+	fled_cdev->ops = &sgm3140_flash_ops;
+
+	led_cdev->brightness_set_blocking = sgm3140_brightness_set;
+	led_cdev->max_brightness = LED_ON;
+	led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+	sgm3140_init_flash_timeout(priv);
+
+	init_data.fwnode = child_node;
+
+	platform_set_drvdata(pdev, priv);
+
+	/* Register in the LED subsystem */
+	ret = devm_led_classdev_flash_register_ext(&pdev->dev,
+						   fled_cdev, &init_data);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register flash device: %d\n",
+			ret);
+		goto err;
+	}
+
+	sgm3140_init_v4l2_flash_config(priv, &v4l2_sd_cfg);
+
+	/* Create V4L2 Flash subdev */
+	priv->v4l2_flash = v4l2_flash_init(&pdev->dev,
+					   child_node,
+					   fled_cdev, NULL,
+					   &v4l2_sd_cfg);
+	if (IS_ERR(priv->v4l2_flash)) {
+		ret = PTR_ERR(priv->v4l2_flash);
+		goto err;
+	}
+
+	return ret;
+
+err:
+	fwnode_handle_put(child_node);
+	return ret;
+}
+
+static int sgm3140_remove(struct platform_device *pdev)
+{
+	struct sgm3140 *priv = platform_get_drvdata(pdev);
+
+	del_timer_sync(&priv->powerdown_timer);
+
+	v4l2_flash_release(priv->v4l2_flash);
+
+	return 0;
+}
+
+static const struct of_device_id sgm3140_dt_match[] = {
+	{ .compatible = "sgmicro,sgm3140" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sgm3140_dt_match);
+
+static struct platform_driver sgm3140_driver = {
+	.probe	= sgm3140_probe,
+	.remove	= sgm3140_remove,
+	.driver	= {
+		.name	= "sgm3140",
+		.of_match_table = sgm3140_dt_match,
+	},
+};
+
+module_platform_driver(sgm3140_driver);
+
+MODULE_AUTHOR("Luca Weiss <luca@z3ntu.xyz>");
+MODULE_DESCRIPTION("SG Micro SGM3140 charge pump led driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
index 58be20cae183..1128ac75443c 100644
--- a/drivers/leds/leds-tca6507.c
+++ b/drivers/leds/leds-tca6507.c
@@ -93,7 +93,7 @@
 #include <linux/leds.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/workqueue.h>
 #include <linux/leds-tca6507.h>
 #include <linux/of.h>
diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c
index a8911ebd30e5..0929f1275814 100644
--- a/drivers/leds/leds-tlc591xx.c
+++ b/drivers/leds/leds-tlc591xx.c
@@ -214,8 +214,9 @@ tlc591xx_probe(struct i2c_client *client,
 		err = devm_led_classdev_register_ext(dev, &led->ldev,
 						     &init_data);
 		if (err < 0) {
-			dev_err(dev, "couldn't register LED %s\n",
-				led->ldev.name);
+			if (err != -EPROBE_DEFER)
+				dev_err(dev, "couldn't register LED %s\n",
+					led->ldev.name);
 			return err;
 		}
 	}
diff --git a/drivers/leds/trigger/ledtrig-timer.c b/drivers/leds/trigger/ledtrig-timer.c
index 34a68604c46c..b4688d1d9d2b 100644
--- a/drivers/leds/trigger/ledtrig-timer.c
+++ b/drivers/leds/trigger/ledtrig-timer.c
@@ -28,7 +28,7 @@ static ssize_t led_delay_on_store(struct device *dev,
 {
 	struct led_classdev *led_cdev = led_trigger_get_led(dev);
 	unsigned long state;
-	ssize_t ret = -EINVAL;
+	ssize_t ret;
 
 	ret = kstrtoul(buf, 10, &state);
 	if (ret)
@@ -53,7 +53,7 @@ static ssize_t led_delay_off_store(struct device *dev,
 {
 	struct led_classdev *led_cdev = led_trigger_get_led(dev);
 	unsigned long state;
-	ssize_t ret = -EINVAL;
+	ssize_t ret;
 
 	ret = kstrtoul(buf, 10, &state);
 	if (ret)
diff --git a/drivers/lightnvm/pblk-init.c b/drivers/lightnvm/pblk-init.c
index 9a967a2e83dd..6e677ff62cc9 100644
--- a/drivers/lightnvm/pblk-init.c
+++ b/drivers/lightnvm/pblk-init.c
@@ -145,9 +145,8 @@ static int pblk_l2p_init(struct pblk *pblk, bool factory_init)
 	int ret = 0;
 
 	map_size = pblk_trans_map_size(pblk);
-	pblk->trans_map = __vmalloc(map_size, GFP_KERNEL | __GFP_NOWARN
-					| __GFP_RETRY_MAYFAIL | __GFP_HIGHMEM,
-					PAGE_KERNEL);
+	pblk->trans_map = __vmalloc(map_size, GFP_KERNEL | __GFP_NOWARN |
+				    __GFP_RETRY_MAYFAIL | __GFP_HIGHMEM);
 	if (!pblk->trans_map) {
 		pblk_err(pblk, "failed to allocate L2P (need %zu of memory)\n",
 				map_size);
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 7af0c536d568..28b8581b44dd 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -183,8 +183,7 @@ static void mac_hid_stop_emulation(void)
 }
 
 static int mac_hid_toggle_emumouse(struct ctl_table *table, int write,
-				   void __user *buffer, size_t *lenp,
-				   loff_t *ppos)
+				   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *valp = table->data;
 	int old_val = *valp;
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index d6d5ab23c088..6cb6188a61df 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -269,6 +269,7 @@ config DM_UNSTRIPED
 config DM_CRYPT
 	tristate "Crypt target support"
 	depends on BLK_DEV_DM
+	depends on (ENCRYPTED_KEYS || ENCRYPTED_KEYS=n)
 	select CRYPTO
 	select CRYPTO_CBC
 	select CRYPTO_ESSIV
@@ -336,6 +337,14 @@ config DM_WRITECACHE
 	   The writecache target doesn't cache reads because reads are supposed
 	   to be cached in standard RAM.
 
+config DM_EBS
+	tristate "Emulated block size target (EXPERIMENTAL)"
+	depends on BLK_DEV_DM
+	select DM_BUFIO
+	help
+	  dm-ebs emulates smaller logical block size on backing devices
+	  with larger ones (e.g. 512 byte sectors on 4K native disks).
+
 config DM_ERA
        tristate "Era target (EXPERIMENTAL)"
        depends on BLK_DEV_DM
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index d91a7edcd2ab..9a2d673f94bc 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -17,6 +17,7 @@ dm-thin-pool-y	+= dm-thin.o dm-thin-metadata.o
 dm-cache-y	+= dm-cache-target.o dm-cache-metadata.o dm-cache-policy.o \
 		    dm-cache-background-tracker.o
 dm-cache-smq-y   += dm-cache-policy-smq.o
+dm-ebs-y	+= dm-ebs-target.o
 dm-era-y	+= dm-era-target.o
 dm-clone-y	+= dm-clone-target.o dm-clone-metadata.o
 dm-verity-y	+= dm-verity-target.o
@@ -65,6 +66,7 @@ obj-$(CONFIG_DM_THIN_PROVISIONING)	+= dm-thin-pool.o
 obj-$(CONFIG_DM_VERITY)		+= dm-verity.o
 obj-$(CONFIG_DM_CACHE)		+= dm-cache.o
 obj-$(CONFIG_DM_CACHE_SMQ)	+= dm-cache-smq.o
+obj-$(CONFIG_DM_EBS)		+= dm-ebs.o
 obj-$(CONFIG_DM_ERA)		+= dm-era.o
 obj-$(CONFIG_DM_CLONE)		+= dm-clone.o
 obj-$(CONFIG_DM_LOG_WRITES)	+= dm-log-writes.o
diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c
index 71a90fbec314..77d1a2697517 100644
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -1372,7 +1372,6 @@ void bch_flash_dev_request_init(struct bcache_device *d)
 {
 	struct gendisk *g = d->disk;
 
-	g->queue->make_request_fn		= flash_dev_make_request;
 	g->queue->backing_dev_info->congested_fn = flash_dev_congested;
 	d->cache_miss				= flash_dev_cache_miss;
 	d->ioctl				= flash_dev_ioctl;
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
index 2d519c223562..c35f224400c1 100644
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -400,13 +400,13 @@ static void *alloc_buffer_data(struct dm_bufio_client *c, gfp_t gfp_mask,
 	 */
 	if (gfp_mask & __GFP_NORETRY) {
 		unsigned noio_flag = memalloc_noio_save();
-		void *ptr = __vmalloc(c->block_size, gfp_mask, PAGE_KERNEL);
+		void *ptr = __vmalloc(c->block_size, gfp_mask);
 
 		memalloc_noio_restore(noio_flag);
 		return ptr;
 	}
 
-	return __vmalloc(c->block_size, gfp_mask, PAGE_KERNEL);
+	return __vmalloc(c->block_size, gfp_mask);
 }
 
 /*
@@ -631,6 +631,19 @@ static void use_bio(struct dm_buffer *b, int rw, sector_t sector,
 	submit_bio(bio);
 }
 
+static inline sector_t block_to_sector(struct dm_bufio_client *c, sector_t block)
+{
+	sector_t sector;
+
+	if (likely(c->sectors_per_block_bits >= 0))
+		sector = block << c->sectors_per_block_bits;
+	else
+		sector = block * (c->block_size >> SECTOR_SHIFT);
+	sector += c->start;
+
+	return sector;
+}
+
 static void submit_io(struct dm_buffer *b, int rw, void (*end_io)(struct dm_buffer *, blk_status_t))
 {
 	unsigned n_sectors;
@@ -639,11 +652,7 @@ static void submit_io(struct dm_buffer *b, int rw, void (*end_io)(struct dm_buff
 
 	b->end_io = end_io;
 
-	if (likely(b->c->sectors_per_block_bits >= 0))
-		sector = b->block << b->c->sectors_per_block_bits;
-	else
-		sector = b->block * (b->c->block_size >> SECTOR_SHIFT);
-	sector += b->c->start;
+	sector = block_to_sector(b->c, b->block);
 
 	if (rw != REQ_OP_WRITE) {
 		n_sectors = b->c->block_size >> SECTOR_SHIFT;
@@ -1325,6 +1334,56 @@ int dm_bufio_issue_flush(struct dm_bufio_client *c)
 }
 EXPORT_SYMBOL_GPL(dm_bufio_issue_flush);
 
+/*
+ * Use dm-io to send a discard request to flush the device.
+ */
+int dm_bufio_issue_discard(struct dm_bufio_client *c, sector_t block, sector_t count)
+{
+	struct dm_io_request io_req = {
+		.bi_op = REQ_OP_DISCARD,
+		.bi_op_flags = REQ_SYNC,
+		.mem.type = DM_IO_KMEM,
+		.mem.ptr.addr = NULL,
+		.client = c->dm_io,
+	};
+	struct dm_io_region io_reg = {
+		.bdev = c->bdev,
+		.sector = block_to_sector(c, block),
+		.count = block_to_sector(c, count),
+	};
+
+	BUG_ON(dm_bufio_in_request());
+
+	return dm_io(&io_req, 1, &io_reg, NULL);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_issue_discard);
+
+/*
+ * Free the specified range of buffers. If a buffer is held by other process, it
+ * is not freed. If a buffer is dirty, it is discarded without writeback.
+ * Finally, send the discard request to the device.
+ */
+int dm_bufio_discard_buffers(struct dm_bufio_client *c, sector_t block, sector_t count)
+{
+	sector_t i;
+
+	for (i = block; i < block + count; i++) {
+		struct dm_buffer *b;
+		dm_bufio_lock(c);
+		b = __find(c, i);
+		if (b && likely(!b->hold_count)) {
+			wait_on_bit_io(&b->state, B_READING, TASK_UNINTERRUPTIBLE);
+			wait_on_bit_io(&b->state, B_WRITING, TASK_UNINTERRUPTIBLE);
+			__unlink_buffer(b);
+			__free_buffer_wake(b);
+		}
+		dm_bufio_unlock(c);
+	}
+
+	return dm_bufio_issue_discard(c, block, count);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_discard_buffers);
+
 /*
  * We first delete any other buffer that may be at that new location.
  *
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 3df90daba89e..71c651465bdd 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -34,7 +34,9 @@
 #include <crypto/aead.h>
 #include <crypto/authenc.h>
 #include <linux/rtnetlink.h> /* for struct rtattr and RTA macros only */
+#include <linux/key-type.h>
 #include <keys/user-type.h>
+#include <keys/encrypted-type.h>
 
 #include <linux/device-mapper.h>
 
@@ -212,7 +214,7 @@ struct crypt_config {
 	struct mutex bio_alloc_lock;
 
 	u8 *authenc_key; /* space for keys in authenc() format (if used) */
-	u8 key[0];
+	u8 key[];
 };
 
 #define MIN_IOS		64
@@ -2215,12 +2217,47 @@ static bool contains_whitespace(const char *str)
 	return false;
 }
 
+static int set_key_user(struct crypt_config *cc, struct key *key)
+{
+	const struct user_key_payload *ukp;
+
+	ukp = user_key_payload_locked(key);
+	if (!ukp)
+		return -EKEYREVOKED;
+
+	if (cc->key_size != ukp->datalen)
+		return -EINVAL;
+
+	memcpy(cc->key, ukp->data, cc->key_size);
+
+	return 0;
+}
+
+#if defined(CONFIG_ENCRYPTED_KEYS) || defined(CONFIG_ENCRYPTED_KEYS_MODULE)
+static int set_key_encrypted(struct crypt_config *cc, struct key *key)
+{
+	const struct encrypted_key_payload *ekp;
+
+	ekp = key->payload.data[0];
+	if (!ekp)
+		return -EKEYREVOKED;
+
+	if (cc->key_size != ekp->decrypted_datalen)
+		return -EINVAL;
+
+	memcpy(cc->key, ekp->decrypted_data, cc->key_size);
+
+	return 0;
+}
+#endif /* CONFIG_ENCRYPTED_KEYS */
+
 static int crypt_set_keyring_key(struct crypt_config *cc, const char *key_string)
 {
 	char *new_key_string, *key_desc;
 	int ret;
+	struct key_type *type;
 	struct key *key;
-	const struct user_key_payload *ukp;
+	int (*set_key)(struct crypt_config *cc, struct key *key);
 
 	/*
 	 * Reject key_string with whitespace. dm core currently lacks code for
@@ -2236,16 +2273,26 @@ static int crypt_set_keyring_key(struct crypt_config *cc, const char *key_string
 	if (!key_desc || key_desc == key_string || !strlen(key_desc + 1))
 		return -EINVAL;
 
-	if (strncmp(key_string, "logon:", key_desc - key_string + 1) &&
-	    strncmp(key_string, "user:", key_desc - key_string + 1))
+	if (!strncmp(key_string, "logon:", key_desc - key_string + 1)) {
+		type = &key_type_logon;
+		set_key = set_key_user;
+	} else if (!strncmp(key_string, "user:", key_desc - key_string + 1)) {
+		type = &key_type_user;
+		set_key = set_key_user;
+#if defined(CONFIG_ENCRYPTED_KEYS) || defined(CONFIG_ENCRYPTED_KEYS_MODULE)
+	} else if (!strncmp(key_string, "encrypted:", key_desc - key_string + 1)) {
+		type = &key_type_encrypted;
+		set_key = set_key_encrypted;
+#endif
+	} else {
 		return -EINVAL;
+	}
 
 	new_key_string = kstrdup(key_string, GFP_KERNEL);
 	if (!new_key_string)
 		return -ENOMEM;
 
-	key = request_key(key_string[0] == 'l' ? &key_type_logon : &key_type_user,
-			  key_desc + 1, NULL);
+	key = request_key(type, key_desc + 1, NULL);
 	if (IS_ERR(key)) {
 		kzfree(new_key_string);
 		return PTR_ERR(key);
@@ -2253,23 +2300,14 @@ static int crypt_set_keyring_key(struct crypt_config *cc, const char *key_string
 
 	down_read(&key->sem);
 
-	ukp = user_key_payload_locked(key);
-	if (!ukp) {
-		up_read(&key->sem);
-		key_put(key);
-		kzfree(new_key_string);
-		return -EKEYREVOKED;
-	}
-
-	if (cc->key_size != ukp->datalen) {
+	ret = set_key(cc, key);
+	if (ret < 0) {
 		up_read(&key->sem);
 		key_put(key);
 		kzfree(new_key_string);
-		return -EINVAL;
+		return ret;
 	}
 
-	memcpy(cc->key, ukp->data, cc->key_size);
-
 	up_read(&key->sem);
 	key_put(key);
 
@@ -2323,7 +2361,7 @@ static int get_key_size(char **key_string)
 	return (*key_string[0] == ':') ? -EINVAL : strlen(*key_string) >> 1;
 }
 
-#endif
+#endif /* CONFIG_KEYS */
 
 static int crypt_set_key(struct crypt_config *cc, char *key)
 {
@@ -3282,7 +3320,7 @@ static void crypt_io_hints(struct dm_target *ti, struct queue_limits *limits)
 
 static struct target_type crypt_target = {
 	.name   = "crypt",
-	.version = {1, 20, 0},
+	.version = {1, 21, 0},
 	.module = THIS_MODULE,
 	.ctr    = crypt_ctr,
 	.dtr    = crypt_dtr,
diff --git a/drivers/md/dm-ebs-target.c b/drivers/md/dm-ebs-target.c
new file mode 100644
index 000000000000..ae3f5fad3b39
--- /dev/null
+++ b/drivers/md/dm-ebs-target.c
@@ -0,0 +1,471 @@
+/*
+ * Copyright (C) 2020 Red Hat GmbH
+ *
+ * This file is released under the GPL.
+ *
+ * Device-mapper target to emulate smaller logical block
+ * size on backing devices exposing (natively) larger ones.
+ *
+ * E.g. 512 byte sector emulation on 4K native disks.
+ */
+
+#include "dm.h"
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/dm-bufio.h>
+
+#define DM_MSG_PREFIX "ebs"
+
+static void ebs_dtr(struct dm_target *ti);
+
+/* Emulated block size context. */
+struct ebs_c {
+	struct dm_dev *dev;		/* Underlying device to emulate block size on. */
+	struct dm_bufio_client *bufio;	/* Use dm-bufio for read and read-modify-write processing. */
+	struct workqueue_struct *wq;	/* Workqueue for ^ processing of bios. */
+	struct work_struct ws;		/* Work item used for ^. */
+	struct bio_list bios_in;	/* Worker bios input list. */
+	spinlock_t lock;		/* Guard bios input list above. */
+	sector_t start;			/* <start> table line argument, see ebs_ctr below. */
+	unsigned int e_bs;		/* Emulated block size in sectors exposed to upper layer. */
+	unsigned int u_bs;		/* Underlying block size in sectors retrievd from/set on lower layer device. */
+	unsigned char block_shift;	/* bitshift sectors -> blocks used in dm-bufio API. */
+	bool u_bs_set:1;		/* Flag to indicate underlying block size is set on table line. */
+};
+
+static inline sector_t __sector_to_block(struct ebs_c *ec, sector_t sector)
+{
+	return sector >> ec->block_shift;
+}
+
+static inline sector_t __block_mod(sector_t sector, unsigned int bs)
+{
+	return sector & (bs - 1);
+}
+
+/* Return number of blocks for a bio, accounting for misalignement of start and end sectors. */
+static inline unsigned int __nr_blocks(struct ebs_c *ec, struct bio *bio)
+{
+	sector_t end_sector = __block_mod(bio->bi_iter.bi_sector, ec->u_bs) + bio_sectors(bio);
+
+	return __sector_to_block(ec, end_sector) + (__block_mod(end_sector, ec->u_bs) ? 1 : 0);
+}
+
+static inline bool __ebs_check_bs(unsigned int bs)
+{
+	return bs && is_power_of_2(bs);
+}
+
+/*
+ * READ/WRITE:
+ *
+ * copy blocks between bufio blocks and bio vector's (partial/overlapping) pages.
+ */
+static int __ebs_rw_bvec(struct ebs_c *ec, int rw, struct bio_vec *bv, struct bvec_iter *iter)
+{
+	int r = 0;
+	unsigned char *ba, *pa;
+	unsigned int cur_len;
+	unsigned int bv_len = bv->bv_len;
+	unsigned int buf_off = to_bytes(__block_mod(iter->bi_sector, ec->u_bs));
+	sector_t block = __sector_to_block(ec, iter->bi_sector);
+	struct dm_buffer *b;
+
+	if (unlikely(!bv->bv_page || !bv_len))
+		return -EIO;
+
+	pa = page_address(bv->bv_page) + bv->bv_offset;
+
+	/* Handle overlapping page <-> blocks */
+	while (bv_len) {
+		cur_len = min(dm_bufio_get_block_size(ec->bufio) - buf_off, bv_len);
+
+		/* Avoid reading for writes in case bio vector's page overwrites block completely. */
+		if (rw == READ || buf_off || bv_len < dm_bufio_get_block_size(ec->bufio))
+			ba = dm_bufio_read(ec->bufio, block, &b);
+		else
+			ba = dm_bufio_new(ec->bufio, block, &b);
+
+		if (unlikely(IS_ERR(ba))) {
+			/*
+			 * Carry on with next buffer, if any, to issue all possible
+			 * data but return error.
+			 */
+			r = PTR_ERR(ba);
+		} else {
+			/* Copy data to/from bio to buffer if read/new was successful above. */
+			ba += buf_off;
+			if (rw == READ) {
+				memcpy(pa, ba, cur_len);
+				flush_dcache_page(bv->bv_page);
+			} else {
+				flush_dcache_page(bv->bv_page);
+				memcpy(ba, pa, cur_len);
+				dm_bufio_mark_partial_buffer_dirty(b, buf_off, buf_off + cur_len);
+			}
+
+			dm_bufio_release(b);
+		}
+
+		pa += cur_len;
+		bv_len -= cur_len;
+		buf_off = 0;
+		block++;
+	}
+
+	return r;
+}
+
+/* READ/WRITE: iterate bio vector's copying between (partial) pages and bufio blocks. */
+static int __ebs_rw_bio(struct ebs_c *ec, int rw, struct bio *bio)
+{
+	int r = 0, rr;
+	struct bio_vec bv;
+	struct bvec_iter iter;
+
+	bio_for_each_bvec(bv, bio, iter) {
+		rr = __ebs_rw_bvec(ec, rw, &bv, &iter);
+		if (rr)
+			r = rr;
+	}
+
+	return r;
+}
+
+/*
+ * Discard bio's blocks, i.e. pass discards down.
+ *
+ * Avoid discarding partial blocks at beginning and end;
+ * return 0 in case no blocks can be discarded as a result.
+ */
+static int __ebs_discard_bio(struct ebs_c *ec, struct bio *bio)
+{
+	sector_t block, blocks, sector = bio->bi_iter.bi_sector;
+
+	block = __sector_to_block(ec, sector);
+	blocks = __nr_blocks(ec, bio);
+
+	/*
+	 * Partial first underlying block (__nr_blocks() may have
+	 * resulted in one block).
+	 */
+	if (__block_mod(sector, ec->u_bs)) {
+		block++;
+		blocks--;
+	}
+
+	/* Partial last underlying block if any. */
+	if (blocks && __block_mod(bio_end_sector(bio), ec->u_bs))
+		blocks--;
+
+	return blocks ? dm_bufio_issue_discard(ec->bufio, block, blocks) : 0;
+}
+
+/* Release blocks them from the bufio cache. */
+static void __ebs_forget_bio(struct ebs_c *ec, struct bio *bio)
+{
+	sector_t blocks, sector = bio->bi_iter.bi_sector;
+
+	blocks = __nr_blocks(ec, bio);
+	for (; blocks--; sector += ec->u_bs)
+		dm_bufio_forget(ec->bufio, __sector_to_block(ec, sector));
+}
+
+/* Worker funtion to process incoming bios. */
+static void __ebs_process_bios(struct work_struct *ws)
+{
+	int r;
+	bool write = false;
+	sector_t block1, block2;
+	struct ebs_c *ec = container_of(ws, struct ebs_c, ws);
+	struct bio *bio;
+	struct bio_list bios;
+
+	bio_list_init(&bios);
+
+	spin_lock_irq(&ec->lock);
+	bios = ec->bios_in;
+	bio_list_init(&ec->bios_in);
+	spin_unlock_irq(&ec->lock);
+
+	/* Prefetch all read and any mis-aligned write buffers */
+	bio_list_for_each(bio, &bios) {
+		block1 = __sector_to_block(ec, bio->bi_iter.bi_sector);
+		if (bio_op(bio) == REQ_OP_READ)
+			dm_bufio_prefetch(ec->bufio, block1, __nr_blocks(ec, bio));
+		else if (bio_op(bio) == REQ_OP_WRITE && !(bio->bi_opf & REQ_PREFLUSH)) {
+			block2 = __sector_to_block(ec, bio_end_sector(bio));
+			if (__block_mod(bio->bi_iter.bi_sector, ec->u_bs))
+				dm_bufio_prefetch(ec->bufio, block1, 1);
+			if (__block_mod(bio_end_sector(bio), ec->u_bs) && block2 != block1)
+				dm_bufio_prefetch(ec->bufio, block2, 1);
+		}
+	}
+
+	bio_list_for_each(bio, &bios) {
+		r = -EIO;
+		if (bio_op(bio) == REQ_OP_READ)
+			r = __ebs_rw_bio(ec, READ, bio);
+		else if (bio_op(bio) == REQ_OP_WRITE) {
+			write = true;
+			r = __ebs_rw_bio(ec, WRITE, bio);
+		} else if (bio_op(bio) == REQ_OP_DISCARD) {
+			__ebs_forget_bio(ec, bio);
+			r = __ebs_discard_bio(ec, bio);
+		}
+
+		if (r < 0)
+			bio->bi_status = errno_to_blk_status(r);
+	}
+
+	/*
+	 * We write dirty buffers after processing I/O on them
+	 * but before we endio thus addressing REQ_FUA/REQ_SYNC.
+	 */
+	r = write ? dm_bufio_write_dirty_buffers(ec->bufio) : 0;
+
+	while ((bio = bio_list_pop(&bios))) {
+		/* Any other request is endioed. */
+		if (unlikely(r && bio_op(bio) == REQ_OP_WRITE))
+			bio_io_error(bio);
+		else
+			bio_endio(bio);
+	}
+}
+
+/*
+ * Construct an emulated block size mapping: <dev_path> <offset> <ebs> [<ubs>]
+ *
+ * <dev_path>: path of the underlying device
+ * <offset>: offset in 512 bytes sectors into <dev_path>
+ * <ebs>: emulated block size in units of 512 bytes exposed to the upper layer
+ * [<ubs>]: underlying block size in units of 512 bytes imposed on the lower layer;
+ * 	    optional, if not supplied, retrieve logical block size from underlying device
+ */
+static int ebs_ctr(struct dm_target *ti, unsigned int argc, char **argv)
+{
+	int r;
+	unsigned short tmp1;
+	unsigned long long tmp;
+	char dummy;
+	struct ebs_c *ec;
+
+	if (argc < 3 || argc > 4) {
+		ti->error = "Invalid argument count";
+		return -EINVAL;
+	}
+
+	ec = ti->private = kzalloc(sizeof(*ec), GFP_KERNEL);
+	if (!ec) {
+		ti->error = "Cannot allocate ebs context";
+		return -ENOMEM;
+	}
+
+	r = -EINVAL;
+	if (sscanf(argv[1], "%llu%c", &tmp, &dummy) != 1 ||
+	    tmp != (sector_t)tmp ||
+	    (sector_t)tmp >= ti->len) {
+		ti->error = "Invalid device offset sector";
+		goto bad;
+	}
+	ec->start = tmp;
+
+	if (sscanf(argv[2], "%hu%c", &tmp1, &dummy) != 1 ||
+	    !__ebs_check_bs(tmp1) ||
+	    to_bytes(tmp1) > PAGE_SIZE) {
+		ti->error = "Invalid emulated block size";
+		goto bad;
+	}
+	ec->e_bs = tmp1;
+
+	if (argc > 3) {
+		if (sscanf(argv[3], "%hu%c", &tmp1, &dummy) != 1 || !__ebs_check_bs(tmp1)) {
+			ti->error = "Invalid underlying block size";
+			goto bad;
+		}
+		ec->u_bs = tmp1;
+		ec->u_bs_set = true;
+	} else
+		ec->u_bs_set = false;
+
+	r = dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), &ec->dev);
+	if (r) {
+		ti->error = "Device lookup failed";
+		ec->dev = NULL;
+		goto bad;
+	}
+
+	r = -EINVAL;
+	if (!ec->u_bs_set) {
+		ec->u_bs = to_sector(bdev_logical_block_size(ec->dev->bdev));
+		if (!__ebs_check_bs(ec->u_bs)) {
+			ti->error = "Invalid retrieved underlying block size";
+			goto bad;
+		}
+	}
+
+	if (!ec->u_bs_set && ec->e_bs == ec->u_bs)
+		DMINFO("Emulation superfluous: emulated equal to underlying block size");
+
+	if (__block_mod(ec->start, ec->u_bs)) {
+		ti->error = "Device offset must be multiple of underlying block size";
+		goto bad;
+	}
+
+	ec->bufio = dm_bufio_client_create(ec->dev->bdev, to_bytes(ec->u_bs), 1, 0, NULL, NULL);
+	if (IS_ERR(ec->bufio)) {
+		ti->error = "Cannot create dm bufio client";
+		r = PTR_ERR(ec->bufio);
+		ec->bufio = NULL;
+		goto bad;
+	}
+
+	ec->wq = alloc_ordered_workqueue("dm-" DM_MSG_PREFIX, WQ_MEM_RECLAIM);
+	if (!ec->wq) {
+		ti->error = "Cannot create dm-" DM_MSG_PREFIX " workqueue";
+		r = -ENOMEM;
+		goto bad;
+	}
+
+	ec->block_shift = __ffs(ec->u_bs);
+	INIT_WORK(&ec->ws, &__ebs_process_bios);
+	bio_list_init(&ec->bios_in);
+	spin_lock_init(&ec->lock);
+
+	ti->num_flush_bios = 1;
+	ti->num_discard_bios = 1;
+	ti->num_secure_erase_bios = 0;
+	ti->num_write_same_bios = 0;
+	ti->num_write_zeroes_bios = 0;
+	return 0;
+bad:
+	ebs_dtr(ti);
+	return r;
+}
+
+static void ebs_dtr(struct dm_target *ti)
+{
+	struct ebs_c *ec = ti->private;
+
+	if (ec->wq)
+		destroy_workqueue(ec->wq);
+	if (ec->bufio)
+		dm_bufio_client_destroy(ec->bufio);
+	if (ec->dev)
+		dm_put_device(ti, ec->dev);
+	kfree(ec);
+}
+
+static int ebs_map(struct dm_target *ti, struct bio *bio)
+{
+	struct ebs_c *ec = ti->private;
+
+	bio_set_dev(bio, ec->dev->bdev);
+	bio->bi_iter.bi_sector = ec->start + dm_target_offset(ti, bio->bi_iter.bi_sector);
+
+	if (unlikely(bio->bi_opf & REQ_OP_FLUSH))
+		return DM_MAPIO_REMAPPED;
+	/*
+	 * Only queue for bufio processing in case of partial or overlapping buffers
+	 * -or-
+	 * emulation with ebs == ubs aiming for tests of dm-bufio overhead.
+	 */
+	if (likely(__block_mod(bio->bi_iter.bi_sector, ec->u_bs) ||
+		   __block_mod(bio_end_sector(bio), ec->u_bs) ||
+		   ec->e_bs == ec->u_bs)) {
+		spin_lock_irq(&ec->lock);
+		bio_list_add(&ec->bios_in, bio);
+		spin_unlock_irq(&ec->lock);
+
+		queue_work(ec->wq, &ec->ws);
+
+		return DM_MAPIO_SUBMITTED;
+	}
+
+	/* Forget any buffer content relative to this direct backing device I/O. */
+	__ebs_forget_bio(ec, bio);
+
+	return DM_MAPIO_REMAPPED;
+}
+
+static void ebs_status(struct dm_target *ti, status_type_t type,
+		       unsigned status_flags, char *result, unsigned maxlen)
+{
+	struct ebs_c *ec = ti->private;
+
+	switch (type) {
+	case STATUSTYPE_INFO:
+		*result = '\0';
+		break;
+	case STATUSTYPE_TABLE:
+		snprintf(result, maxlen, ec->u_bs_set ? "%s %llu %u %u" : "%s %llu %u",
+			 ec->dev->name, (unsigned long long) ec->start, ec->e_bs, ec->u_bs);
+		break;
+	}
+}
+
+static int ebs_prepare_ioctl(struct dm_target *ti, struct block_device **bdev)
+{
+	struct ebs_c *ec = ti->private;
+	struct dm_dev *dev = ec->dev;
+
+	/*
+	 * Only pass ioctls through if the device sizes match exactly.
+	 */
+	*bdev = dev->bdev;
+	return !!(ec->start || ti->len != i_size_read(dev->bdev->bd_inode) >> SECTOR_SHIFT);
+}
+
+static void ebs_io_hints(struct dm_target *ti, struct queue_limits *limits)
+{
+	struct ebs_c *ec = ti->private;
+
+	limits->logical_block_size = to_bytes(ec->e_bs);
+	limits->physical_block_size = to_bytes(ec->u_bs);
+	limits->alignment_offset = limits->physical_block_size;
+	blk_limits_io_min(limits, limits->logical_block_size);
+}
+
+static int ebs_iterate_devices(struct dm_target *ti,
+				  iterate_devices_callout_fn fn, void *data)
+{
+	struct ebs_c *ec = ti->private;
+
+	return fn(ti, ec->dev, ec->start, ti->len, data);
+}
+
+static struct target_type ebs_target = {
+	.name		 = "ebs",
+	.version	 = {1, 0, 1},
+	.features	 = DM_TARGET_PASSES_INTEGRITY,
+	.module		 = THIS_MODULE,
+	.ctr		 = ebs_ctr,
+	.dtr		 = ebs_dtr,
+	.map		 = ebs_map,
+	.status		 = ebs_status,
+	.io_hints	 = ebs_io_hints,
+	.prepare_ioctl	 = ebs_prepare_ioctl,
+	.iterate_devices = ebs_iterate_devices,
+};
+
+static int __init dm_ebs_init(void)
+{
+	int r = dm_register_target(&ebs_target);
+
+	if (r < 0)
+		DMERR("register failed %d", r);
+
+	return r;
+}
+
+static void dm_ebs_exit(void)
+{
+	dm_unregister_target(&ebs_target);
+}
+
+module_init(dm_ebs_init);
+module_exit(dm_ebs_exit);
+
+MODULE_AUTHOR("Heinz Mauelshagen <dm-devel@redhat.com>");
+MODULE_DESCRIPTION(DM_NAME " emulated block size target");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index 4094c47eca7f..fe39ed31b20d 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -92,7 +92,7 @@ struct journal_entry {
 		} s;
 		__u64 sector;
 	} u;
-	commit_id_t last_bytes[0];
+	commit_id_t last_bytes[];
 	/* __u8 tag[0]; */
 };
 
diff --git a/drivers/md/dm-log-writes.c b/drivers/md/dm-log-writes.c
index 8ea20b56b4d6..e3d35c6c9f71 100644
--- a/drivers/md/dm-log-writes.c
+++ b/drivers/md/dm-log-writes.c
@@ -127,7 +127,7 @@ struct pending_block {
 	char *data;
 	u32 datalen;
 	struct list_head list;
-	struct bio_vec vecs[0];
+	struct bio_vec vecs[];
 };
 
 struct per_bio_data {
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 58fd137b6ae1..e0c800cf87a9 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -585,10 +585,12 @@ static struct pgpath *__map_bio(struct multipath *m, struct bio *bio)
 
 	/* Do we need to select a new pgpath? */
 	pgpath = READ_ONCE(m->current_pgpath);
-	queue_io = test_bit(MPATHF_QUEUE_IO, &m->flags);
-	if (!pgpath || !queue_io)
+	if (!pgpath || !test_bit(MPATHF_QUEUE_IO, &m->flags))
 		pgpath = choose_pgpath(m, bio->bi_iter.bi_size);
 
+	/* MPATHF_QUEUE_IO might have been cleared by choose_pgpath. */
+	queue_io = test_bit(MPATHF_QUEUE_IO, &m->flags);
+
 	if ((pgpath && queue_io) ||
 	    (!pgpath && test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))) {
 		/* Queue for the daemon to resubmit */
@@ -1916,7 +1918,7 @@ static int multipath_prepare_ioctl(struct dm_target *ti,
 	int r;
 
 	current_pgpath = READ_ONCE(m->current_pgpath);
-	if (!current_pgpath)
+	if (!current_pgpath || !test_bit(MPATHF_QUEUE_IO, &m->flags))
 		current_pgpath = choose_pgpath(m, 0);
 
 	if (current_pgpath) {
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 9a18bef0a5ff..10e8b2fe787b 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -254,7 +254,7 @@ struct raid_set {
 		int mode;
 	} journal_dev;
 
-	struct raid_dev dev[0];
+	struct raid_dev dev[];
 };
 
 static void rs_config_backup(struct raid_set *rs, struct rs_layout *l)
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 089aed57e083..2f655d9f4200 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -83,7 +83,7 @@ struct mirror_set {
 	struct work_struct trigger_event;
 
 	unsigned nr_mirrors;
-	struct mirror mirror[0];
+	struct mirror mirror[];
 };
 
 DECLARE_DM_KCOPYD_THROTTLE_WITH_MODULE_PARM(raid1_resync_throttle,
diff --git a/drivers/md/dm-stats.c b/drivers/md/dm-stats.c
index 71417048256a..35d368c418d0 100644
--- a/drivers/md/dm-stats.c
+++ b/drivers/md/dm-stats.c
@@ -56,7 +56,7 @@ struct dm_stat {
 	size_t percpu_alloc_size;
 	size_t histogram_alloc_size;
 	struct dm_stat_percpu *stat_percpu[NR_CPUS];
-	struct dm_stat_shared stat_shared[0];
+	struct dm_stat_shared stat_shared[];
 };
 
 #define STAT_PRECISE_TIMESTAMPS		1
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index fa813c0f993d..151d022b032d 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -41,7 +41,7 @@ struct stripe_c {
 	/* Work struct used for triggering events*/
 	struct work_struct trigger_event;
 
-	struct stripe stripe[0];
+	struct stripe stripe[];
 };
 
 /*
diff --git a/drivers/md/dm-switch.c b/drivers/md/dm-switch.c
index 8a0f057b8122..bff4c7fa1cd2 100644
--- a/drivers/md/dm-switch.c
+++ b/drivers/md/dm-switch.c
@@ -53,7 +53,7 @@ struct switch_ctx {
 	/*
 	 * Array of dm devices to switch between.
 	 */
-	struct switch_path path_list[0];
+	struct switch_path path_list[];
 };
 
 static struct switch_ctx *alloc_switch_ctx(struct dm_target *ti, unsigned nr_paths,
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 0a2cc197f62b..8277b959e00b 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -279,7 +279,6 @@ static struct dm_dev_internal *find_device(struct list_head *l, dev_t dev)
 static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev,
 				  sector_t start, sector_t len, void *data)
 {
-	struct request_queue *q;
 	struct queue_limits *limits = data;
 	struct block_device *bdev = dev->bdev;
 	sector_t dev_size =
@@ -288,22 +287,6 @@ static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev,
 		limits->logical_block_size >> SECTOR_SHIFT;
 	char b[BDEVNAME_SIZE];
 
-	/*
-	 * Some devices exist without request functions,
-	 * such as loop devices not yet bound to backing files.
-	 * Forbid the use of such devices.
-	 */
-	q = bdev_get_queue(bdev);
-	if (!q || !q->make_request_fn) {
-		DMWARN("%s: %s is not yet initialised: "
-		       "start=%llu, len=%llu, dev_size=%llu",
-		       dm_device_name(ti->table->md), bdevname(bdev, b),
-		       (unsigned long long)start,
-		       (unsigned long long)len,
-		       (unsigned long long)dev_size);
-		return 1;
-	}
-
 	if (!dev_size)
 		return 0;
 
diff --git a/drivers/md/dm-verity-fec.c b/drivers/md/dm-verity-fec.c
index 49147e634046..fb41b4f23c48 100644
--- a/drivers/md/dm-verity-fec.c
+++ b/drivers/md/dm-verity-fec.c
@@ -435,7 +435,7 @@ int verity_fec_decode(struct dm_verity *v, struct dm_verity_io *io,
 	fio->level++;
 
 	if (type == DM_VERITY_BLOCK_TYPE_METADATA)
-		block += v->data_blocks;
+		block = block - v->hash_start + v->data_blocks;
 
 	/*
 	 * For RS(M, N), the continuous FEC data is divided into blocks of N
diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c
index 114927da9cc9..613c171b1b6d 100644
--- a/drivers/md/dm-writecache.c
+++ b/drivers/md/dm-writecache.c
@@ -931,6 +931,24 @@ static int writecache_alloc_entries(struct dm_writecache *wc)
 	return 0;
 }
 
+static int writecache_read_metadata(struct dm_writecache *wc, sector_t n_sectors)
+{
+	struct dm_io_region region;
+	struct dm_io_request req;
+
+	region.bdev = wc->ssd_dev->bdev;
+	region.sector = wc->start_sector;
+	region.count = n_sectors;
+	req.bi_op = REQ_OP_READ;
+	req.bi_op_flags = REQ_SYNC;
+	req.mem.type = DM_IO_VMA;
+	req.mem.ptr.vma = (char *)wc->memory_map;
+	req.client = wc->dm_io;
+	req.notify.fn = NULL;
+
+	return dm_io(&req, 1, &region, NULL);
+}
+
 static void writecache_resume(struct dm_target *ti)
 {
 	struct dm_writecache *wc = ti->private;
@@ -941,8 +959,18 @@ static void writecache_resume(struct dm_target *ti)
 
 	wc_lock(wc);
 
-	if (WC_MODE_PMEM(wc))
+	if (WC_MODE_PMEM(wc)) {
 		persistent_memory_invalidate_cache(wc->memory_map, wc->memory_map_size);
+	} else {
+		r = writecache_read_metadata(wc, wc->metadata_sectors);
+		if (r) {
+			size_t sb_entries_offset;
+			writecache_error(wc, r, "unable to read metadata: %d", r);
+			sb_entries_offset = offsetof(struct wc_memory_superblock, entries);
+			memset((char *)wc->memory_map + sb_entries_offset, -1,
+			       (wc->metadata_sectors << SECTOR_SHIFT) - sb_entries_offset);
+		}
+	}
 
 	wc->tree = RB_ROOT;
 	INIT_LIST_HEAD(&wc->lru);
@@ -2102,6 +2130,12 @@ static int writecache_ctr(struct dm_target *ti, unsigned argc, char **argv)
 		ti->error = "Invalid block size";
 		goto bad;
 	}
+	if (wc->block_size < bdev_logical_block_size(wc->dev->bdev) ||
+	    wc->block_size < bdev_logical_block_size(wc->ssd_dev->bdev)) {
+		r = -EINVAL;
+		ti->error = "Block size is smaller than device logical block size";
+		goto bad;
+	}
 	wc->block_size_bits = __ffs(wc->block_size);
 
 	wc->max_writeback_jobs = MAX_WRITEBACK_JOBS;
@@ -2200,8 +2234,6 @@ static int writecache_ctr(struct dm_target *ti, unsigned argc, char **argv)
 			goto bad;
 		}
 	} else {
-		struct dm_io_region region;
-		struct dm_io_request req;
 		size_t n_blocks, n_metadata_blocks;
 		uint64_t n_bitmap_bits;
 
@@ -2258,19 +2290,9 @@ static int writecache_ctr(struct dm_target *ti, unsigned argc, char **argv)
 			goto bad;
 		}
 
-		region.bdev = wc->ssd_dev->bdev;
-		region.sector = wc->start_sector;
-		region.count = wc->metadata_sectors;
-		req.bi_op = REQ_OP_READ;
-		req.bi_op_flags = REQ_SYNC;
-		req.mem.type = DM_IO_VMA;
-		req.mem.ptr.vma = (char *)wc->memory_map;
-		req.client = wc->dm_io;
-		req.notify.fn = NULL;
-
-		r = dm_io(&req, 1, &region, NULL);
+		r = writecache_read_metadata(wc, wc->block_size >> SECTOR_SHIFT);
 		if (r) {
-			ti->error = "Unable to read metadata";
+			ti->error = "Unable to read first block of metadata";
 			goto bad;
 		}
 	}
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index db9e46114653..0eb93da44ea2 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1788,6 +1788,9 @@ static blk_qc_t dm_make_request(struct request_queue *q, struct bio *bio)
 	int srcu_idx;
 	struct dm_table *map;
 
+	if (dm_get_md_type(md) == DM_TYPE_REQUEST_BASED)
+		return blk_mq_make_request(q, bio);
+
 	map = dm_get_live_table(md, &srcu_idx);
 
 	/* if we're suspended, we have to queue this io for later */
diff --git a/drivers/md/md-linear.h b/drivers/md/md-linear.h
index 8381d651d4ed..24e97db50ebb 100644
--- a/drivers/md/md-linear.h
+++ b/drivers/md/md-linear.h
@@ -12,6 +12,6 @@ struct linear_conf
 	struct rcu_head		rcu;
 	sector_t		array_sectors;
 	int			raid_disks; /* a copy of mddev->raid_disks */
-	struct dev_info		disks[0];
+	struct dev_info		disks[];
 };
 #endif
diff --git a/drivers/md/persistent-data/dm-btree-internal.h b/drivers/md/persistent-data/dm-btree-internal.h
index a240990a7f33..f4e644dd8101 100644
--- a/drivers/md/persistent-data/dm-btree-internal.h
+++ b/drivers/md/persistent-data/dm-btree-internal.h
@@ -38,7 +38,7 @@ struct node_header {
 
 struct btree_node {
 	struct node_header header;
-	__le64 keys[0];
+	__le64 keys[];
 } __packed;
 
 
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index e7ccad898736..b7eb09e8c025 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -180,7 +180,7 @@ struct r1bio {
 	 * if the IO is in WRITE direction, then multiple bios are used.
 	 * We choose the number when they are allocated.
 	 */
-	struct bio		*bios[0];
+	struct bio		*bios[];
 	/* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/
 };
 
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index d3eaaf3eb1bc..79cd2b7d3128 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -153,7 +153,7 @@ struct r10bio {
 		};
 		sector_t	addr;
 		int		devnum;
-	} devs[0];
+	} devs[];
 };
 
 /* bits for r10bio.state */
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 9dfea5c4b6ab..a6d073f2e036 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -3,42 +3,81 @@
 # Multimedia device configuration
 #
 
-config CEC_CORE
-	tristate
-
-config CEC_NOTIFIER
-	bool
-
-config CEC_PIN
-	bool
-
+#
+# NOTE: CEC and Remote Controller support should not depend on MEDIA_SUPPORT
+#
 source "drivers/media/rc/Kconfig"
+source "drivers/media/cec/Kconfig"
 
 menuconfig MEDIA_SUPPORT
 	tristate "Multimedia support"
 	depends on HAS_IOMEM
 	help
-	  If you want to use Webcams, Video grabber devices and/or TV devices
-	  enable this option and other options below.
+	  If you want to use media devices, including Webcams, Video grabber
+	  devices and/or TV devices, V4L2 codecs, etc, enable this option
+	  and other options below.
+
 	  Additional info and docs are available on the web at
 	  <https://linuxtv.org>
 
 if MEDIA_SUPPORT
 
-comment "Multimedia core support"
+config MEDIA_SUPPORT_FILTER
+	bool "Filter media drivers"
+	depends on MEDIA_SUPPORT
+	default y if !EMBEDDED && !EXPERT
+	help
+	   Configuring the media subsystem can be complex, as there are
+	   hundreds of drivers and other config options.
+
+	   This menu offers option that will help the Kernel's config
+	   system to hide drivers that are out of the scope of the
+	   user needs, and disabling core support for unused APIs.
+
+	   If not selected, all non-optional media core functionality
+	   needed to support media drivers will be enabled. Also, all
+	   media device drivers should be shown.
+
+config MEDIA_SUBDRV_AUTOSELECT
+	bool "Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)"
+	depends on HAS_IOMEM
+	select I2C
+	select I2C_MUX
+	default y if MEDIA_SUPPORT_FILTER
+	help
+	  By default, a media driver auto-selects all possible ancillary
+	  devices such as tuners, sensors, video encoders/decoders and
+	  frontends, that are used by any of the supported devices.
+
+	  This is generally the right thing to do, except when there
+	  are strict constraints with regards to the kernel size,
+	  like on embedded systems.
+
+	  Use this option with care, as deselecting ancillary drivers which
+	  are, in fact, necessary will result in the lack of the needed
+	  functionality for your device (it may not tune or may not have
+	  the needed demodulators).
+
+	  If unsure say Y.
+
+menu "Media device types"
 
 #
 # Multimedia support - automatically enable V4L2 and DVB core
 #
 config MEDIA_CAMERA_SUPPORT
-	bool "Cameras/video grabbers support"
+	bool
+	prompt "Cameras and video grabbers" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
 	help
 	  Enable support for webcams and video grabbers.
 
 	  Say Y when you have a webcam or a video capture grabber board.
 
 config MEDIA_ANALOG_TV_SUPPORT
-	bool "Analog TV support"
+	bool
+	prompt "Analog TV" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
 	help
 	  Enable analog TV support.
 
@@ -50,7 +89,9 @@ config MEDIA_ANALOG_TV_SUPPORT
 		will disable support for them.
 
 config MEDIA_DIGITAL_TV_SUPPORT
-	bool "Digital TV support"
+	bool
+	prompt "Digital TV" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
 	help
 	  Enable digital TV support.
 
@@ -58,7 +99,9 @@ config MEDIA_DIGITAL_TV_SUPPORT
 	  hybrid digital TV and analog TV.
 
 config MEDIA_RADIO_SUPPORT
-	bool "AM/FM radio receivers/transmitters support"
+	bool
+	prompt "AM/FM radio receivers/transmitters" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
 	help
 	  Enable AM/FM radio support.
 
@@ -72,47 +115,65 @@ config MEDIA_RADIO_SUPPORT
 		disable support for them.
 
 config MEDIA_SDR_SUPPORT
-	bool "Software defined radio support"
+	bool
+	prompt "Software defined radio" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
 	help
 	  Enable software defined radio support.
 
 	  Say Y when you have a software defined radio device.
 
-config MEDIA_CEC_SUPPORT
-	bool "HDMI CEC support"
+config MEDIA_PLATFORM_SUPPORT
+	bool
+	prompt "Platform-specific devices" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
 	help
-	  Enable support for HDMI CEC (Consumer Electronics Control),
-	  which is an optional HDMI feature.
+	  Enable support for complex cameras, codecs, and other hardware
+	  that are integrated at the CPU, GPU or on Image Signalling Processor
+	  and don't use PCI, USB or Firewire buses.
 
-	  Say Y when you have an HDMI receiver, transmitter or a USB CEC
-	  adapter that supports HDMI CEC.
+	  This is found on Embedded hardware (SoC), on V4L2 codecs and
+	  on some GPU and newer CPU chipsets.
 
-source "drivers/media/cec/Kconfig"
+	  Say Y when you want to be able so see such devices.
 
-source "drivers/media/mc/Kconfig"
+config MEDIA_TEST_SUPPORT
+	bool
+	prompt "Test drivers" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Those drivers should not be used on production Kernels, but
+	  can be useful on debug ones. It enables several dummy drivers
+	  that simulate a real hardware. Very useful to test userspace
+	  applications and to validate if the subsystem core is doesn't
+	  have regressions.
 
-#
-# Video4Linux support
-#	Only enables if one of the V4L2 types (ATV, webcam, radio) is selected
-#
+	  Say Y if you want to use some virtual test driver.
+
+	  In case of doubts, say N.
+	  Say Y when you have a software defined radio device.
+endmenu # media device types
+
+
+menu "Media core support"
+	visible if !MEDIA_SUPPORT_FILTER
 
 config VIDEO_DEV
-	tristate
-	depends on MEDIA_SUPPORT
-	depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
-	default y
+	tristate "Video4Linux core"
+	default MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT || MEDIA_PLATFORM_SUPPORT || MEDIA_TEST_SUPPORT
+	help
+	  Enables the V4L2 API, used by cameras, analog TV, video grabbers,
+	  radio devices and by some input devices.
 
-config VIDEO_V4L2_SUBDEV_API
-	bool "V4L2 sub-device userspace API"
-	depends on VIDEO_DEV && MEDIA_CONTROLLER
+config MEDIA_CONTROLLER
+	bool "Media Controller API"
+	default MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_PLATFORM_SUPPORT
 	help
-	  Enables the V4L2 sub-device pad-level userspace API used to configure
-	  video format, size and frame rate between hardware blocks.
+	  Enable the media controller API used to query media devices internal
+	  topology and configure it dynamically.
 
 	  This API is mostly used by camera interfaces in embedded platforms.
 
-source "drivers/media/v4l2-core/Kconfig"
-
 #
 # DVB Core
 #	Only enables if one of DTV is selected
@@ -120,98 +181,73 @@ source "drivers/media/v4l2-core/Kconfig"
 
 config DVB_CORE
 	tristate
-	depends on MEDIA_SUPPORT
 	depends on MEDIA_DIGITAL_TV_SUPPORT
 	depends on (I2C || I2C=n)
-	default y
+	default MEDIA_DIGITAL_TV_SUPPORT
 	select CRC32
-
-config DVB_MMAP
-	bool "Enable DVB memory-mapped API (EXPERIMENTAL)"
-	depends on DVB_CORE
-	depends on VIDEO_V4L2=y || VIDEO_V4L2=DVB_CORE
-	select VIDEOBUF2_VMALLOC
 	help
-	  This option enables DVB experimental memory-mapped API, which
-	  reduces the number of context switches to read DVB buffers, as
-	  the buffers can use mmap() syscalls.
+	  Enables the DVB API, used by Digital TV devices. Supports several
+	  standards, including DVB, ATSC, ISDB and CMDB.
 
-	  Support for it is experimental. Use with care. If unsure,
-	  say N.
+endmenu # Media core support
 
-config DVB_NET
-	bool "DVB Network Support"
-	default (NET && INET)
-	depends on NET && INET && DVB_CORE
-	help
-	  This option enables DVB Network Support which is a part of the DVB
-	  standard. It is used, for example, by automatic firmware updates used
-	  on Set-Top-Boxes. It can also be used to access the Internet via the
-	  DVB card, if the network provider supports it.
+#
+# Extra per-media API core functionality
 
-	  You may want to disable the network support on embedded devices. If
-	  unsure say Y.
+menu "Video4Linux options"
+	visible if VIDEO_DEV
 
-# This Kconfig option is used by both PCI and USB drivers
-config TTPCI_EEPROM
-	tristate
-	depends on I2C
+source "drivers/media/v4l2-core/Kconfig"
+endmenu
+
+menu "Media controller options"
+	visible if MEDIA_CONTROLLER
+
+source "drivers/media/mc/Kconfig"
+endmenu
+
+menu "Digital TV options"
+	visible if DVB_CORE
 
 source "drivers/media/dvb-core/Kconfig"
+endmenu
 
-comment "Media drivers"
+menu "Media drivers"
 
-#
-# V4L platform/mem2mem drivers
-#
+comment "Drivers filtered as selected at 'Filter media drivers'"
+	depends on MEDIA_SUPPORT_FILTER
 
 source "drivers/media/usb/Kconfig"
 source "drivers/media/pci/Kconfig"
-source "drivers/media/platform/Kconfig"
-source "drivers/media/mmc/Kconfig"
 source "drivers/media/radio/Kconfig"
 
-comment "Supported FireWire (IEEE 1394) Adapters"
-	depends on DVB_CORE && FIREWIRE
-source "drivers/media/firewire/Kconfig"
-
 # Common driver options
 source "drivers/media/common/Kconfig"
 
-comment "Media ancillary drivers (tuners, sensors, i2c, spi, frontends)"
-
-#
-# Ancillary drivers (tuners, i2c, spi, frontends)
-#
+if MEDIA_PLATFORM_SUPPORT
+source "drivers/media/platform/Kconfig"
+source "drivers/media/mmc/Kconfig"
+endif
 
-config MEDIA_SUBDRV_AUTOSELECT
-	bool "Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)"
-	depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT || MEDIA_SDR_SUPPORT
-	depends on HAS_IOMEM
-	select I2C
-	select I2C_MUX
-	default y if !EMBEDDED
-	help
-	  By default, a media driver auto-selects all possible ancillary
-	  devices such as tuners, sensors, video encoders/decoders and
-	  frontends, that are used by any of the supported devices.
+if MEDIA_TEST_SUPPORT
+source "drivers/media/test-drivers/Kconfig"
+endif
 
-	  This is generally the right thing to do, except when there
-	  are strict constraints with regards to the kernel size,
-	  like on embedded systems.
+source "drivers/media/firewire/Kconfig"
 
-	  Use this option with care, as deselecting ancillary drivers which
-	  are, in fact, necessary will result in the lack of the needed
-	  functionality for your device (it may not tune or may not have
-	  the needed demodulators).
+endmenu
 
-	  If unsure say Y.
+#
+# Ancillary drivers (tuners, i2c, spi, frontends)
+#
 
 config MEDIA_HIDE_ANCILLARY_SUBDRV
 	bool
 	depends on MEDIA_SUBDRV_AUTOSELECT && !COMPILE_TEST && !EXPERT
 	default y
 
+menu "Media ancillary drivers"
+
 config MEDIA_ATTACH
 	bool
 	depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
@@ -223,4 +259,6 @@ source "drivers/media/spi/Kconfig"
 source "drivers/media/tuners/Kconfig"
 source "drivers/media/dvb-frontends/Kconfig"
 
+endmenu
+
 endif # MEDIA_SUPPORT
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index f215f0a89f9e..d18357bf1346 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -29,6 +29,6 @@ obj-$(CONFIG_CEC_CORE) += cec/
 # Finally, merge the drivers that require the core
 #
 
-obj-y += common/ platform/ pci/ usb/ mmc/ firewire/ spi/
+obj-y += common/ platform/ pci/ usb/ mmc/ firewire/ spi/ test-drivers/
 obj-$(CONFIG_VIDEO_DEV) += radio/
 
diff --git a/drivers/media/cec/Kconfig b/drivers/media/cec/Kconfig
index c01919713ab9..eea74b7cfa8c 100644
--- a/drivers/media/cec/Kconfig
+++ b/drivers/media/cec/Kconfig
@@ -1,4 +1,13 @@
 # SPDX-License-Identifier: GPL-2.0-only
+config CEC_CORE
+	tristate
+
+config CEC_NOTIFIER
+	bool
+
+config CEC_PIN
+	bool
+
 config MEDIA_CEC_RC
 	bool "HDMI CEC RC integration"
 	depends on CEC_CORE && RC_CORE
@@ -11,3 +20,19 @@ config CEC_PIN_ERROR_INJ
 	depends on CEC_PIN && DEBUG_FS
 	help
 	  This option enables CEC error injection using debugfs.
+
+menuconfig MEDIA_CEC_SUPPORT
+	bool
+	prompt "HDMI CEC drivers"
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable support for HDMI CEC (Consumer Electronics Control),
+	  which is an optional HDMI feature.
+
+	  Say Y when you have an HDMI receiver, transmitter or a USB CEC
+	  adapter that supports HDMI CEC.
+
+if MEDIA_CEC_SUPPORT
+source "drivers/media/cec/platform/Kconfig"
+source "drivers/media/cec/usb/Kconfig"
+endif
diff --git a/drivers/media/cec/Makefile b/drivers/media/cec/Makefile
index ad8677d8c896..74e80e1b3571 100644
--- a/drivers/media/cec/Makefile
+++ b/drivers/media/cec/Makefile
@@ -1,16 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-cec-objs := cec-core.o cec-adap.o cec-api.o
-
-ifeq ($(CONFIG_CEC_NOTIFIER),y)
-  cec-objs += cec-notifier.o
-endif
-
-ifeq ($(CONFIG_CEC_PIN),y)
-  cec-objs += cec-pin.o
-endif
-
-ifeq ($(CONFIG_CEC_PIN_ERROR_INJ),y)
-  cec-objs += cec-pin-error-inj.o
-endif
-
-obj-$(CONFIG_CEC_CORE) += cec.o
+obj-y += core/ platform/ usb/
diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
deleted file mode 100644
index 6c95dc471d4c..000000000000
--- a/drivers/media/cec/cec-adap.c
+++ /dev/null
@@ -1,2199 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * cec-adap.c - HDMI Consumer Electronics Control framework - CEC adapter
- *
- * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/kmod.h>
-#include <linux/ktime.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <drm/drm_connector.h>
-#include <drm/drm_device.h>
-#include <drm/drm_edid.h>
-#include <drm/drm_file.h>
-
-#include "cec-priv.h"
-
-static void cec_fill_msg_report_features(struct cec_adapter *adap,
-					 struct cec_msg *msg,
-					 unsigned int la_idx);
-
-/*
- * 400 ms is the time it takes for one 16 byte message to be
- * transferred and 5 is the maximum number of retries. Add
- * another 100 ms as a margin. So if the transmit doesn't
- * finish before that time something is really wrong and we
- * have to time out.
- *
- * This is a sign that something it really wrong and a warning
- * will be issued.
- */
-#define CEC_XFER_TIMEOUT_MS (5 * 400 + 100)
-
-#define call_op(adap, op, arg...) \
-	(adap->ops->op ? adap->ops->op(adap, ## arg) : 0)
-
-#define call_void_op(adap, op, arg...)			\
-	do {						\
-		if (adap->ops->op)			\
-			adap->ops->op(adap, ## arg);	\
-	} while (0)
-
-static int cec_log_addr2idx(const struct cec_adapter *adap, u8 log_addr)
-{
-	int i;
-
-	for (i = 0; i < adap->log_addrs.num_log_addrs; i++)
-		if (adap->log_addrs.log_addr[i] == log_addr)
-			return i;
-	return -1;
-}
-
-static unsigned int cec_log_addr2dev(const struct cec_adapter *adap, u8 log_addr)
-{
-	int i = cec_log_addr2idx(adap, log_addr);
-
-	return adap->log_addrs.primary_device_type[i < 0 ? 0 : i];
-}
-
-u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
-			   unsigned int *offset)
-{
-	unsigned int loc = cec_get_edid_spa_location(edid, size);
-
-	if (offset)
-		*offset = loc;
-	if (loc == 0)
-		return CEC_PHYS_ADDR_INVALID;
-	return (edid[loc] << 8) | edid[loc + 1];
-}
-EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr);
-
-void cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info,
-				 const struct drm_connector *connector)
-{
-	memset(conn_info, 0, sizeof(*conn_info));
-	conn_info->type = CEC_CONNECTOR_TYPE_DRM;
-	conn_info->drm.card_no = connector->dev->primary->index;
-	conn_info->drm.connector_id = connector->base.id;
-}
-EXPORT_SYMBOL_GPL(cec_fill_conn_info_from_drm);
-
-/*
- * Queue a new event for this filehandle. If ts == 0, then set it
- * to the current time.
- *
- * We keep a queue of at most max_event events where max_event differs
- * per event. If the queue becomes full, then drop the oldest event and
- * keep track of how many events we've dropped.
- */
-void cec_queue_event_fh(struct cec_fh *fh,
-			const struct cec_event *new_ev, u64 ts)
-{
-	static const u16 max_events[CEC_NUM_EVENTS] = {
-		1, 1, 800, 800, 8, 8, 8, 8
-	};
-	struct cec_event_entry *entry;
-	unsigned int ev_idx = new_ev->event - 1;
-
-	if (WARN_ON(ev_idx >= ARRAY_SIZE(fh->events)))
-		return;
-
-	if (ts == 0)
-		ts = ktime_get_ns();
-
-	mutex_lock(&fh->lock);
-	if (ev_idx < CEC_NUM_CORE_EVENTS)
-		entry = &fh->core_events[ev_idx];
-	else
-		entry = kmalloc(sizeof(*entry), GFP_KERNEL);
-	if (entry) {
-		if (new_ev->event == CEC_EVENT_LOST_MSGS &&
-		    fh->queued_events[ev_idx]) {
-			entry->ev.lost_msgs.lost_msgs +=
-				new_ev->lost_msgs.lost_msgs;
-			goto unlock;
-		}
-		entry->ev = *new_ev;
-		entry->ev.ts = ts;
-
-		if (fh->queued_events[ev_idx] < max_events[ev_idx]) {
-			/* Add new msg at the end of the queue */
-			list_add_tail(&entry->list, &fh->events[ev_idx]);
-			fh->queued_events[ev_idx]++;
-			fh->total_queued_events++;
-			goto unlock;
-		}
-
-		if (ev_idx >= CEC_NUM_CORE_EVENTS) {
-			list_add_tail(&entry->list, &fh->events[ev_idx]);
-			/* drop the oldest event */
-			entry = list_first_entry(&fh->events[ev_idx],
-						 struct cec_event_entry, list);
-			list_del(&entry->list);
-			kfree(entry);
-		}
-	}
-	/* Mark that events were lost */
-	entry = list_first_entry_or_null(&fh->events[ev_idx],
-					 struct cec_event_entry, list);
-	if (entry)
-		entry->ev.flags |= CEC_EVENT_FL_DROPPED_EVENTS;
-
-unlock:
-	mutex_unlock(&fh->lock);
-	wake_up_interruptible(&fh->wait);
-}
-
-/* Queue a new event for all open filehandles. */
-static void cec_queue_event(struct cec_adapter *adap,
-			    const struct cec_event *ev)
-{
-	u64 ts = ktime_get_ns();
-	struct cec_fh *fh;
-
-	mutex_lock(&adap->devnode.lock);
-	list_for_each_entry(fh, &adap->devnode.fhs, list)
-		cec_queue_event_fh(fh, ev, ts);
-	mutex_unlock(&adap->devnode.lock);
-}
-
-/* Notify userspace that the CEC pin changed state at the given time. */
-void cec_queue_pin_cec_event(struct cec_adapter *adap, bool is_high,
-			     bool dropped_events, ktime_t ts)
-{
-	struct cec_event ev = {
-		.event = is_high ? CEC_EVENT_PIN_CEC_HIGH :
-				   CEC_EVENT_PIN_CEC_LOW,
-		.flags = dropped_events ? CEC_EVENT_FL_DROPPED_EVENTS : 0,
-	};
-	struct cec_fh *fh;
-
-	mutex_lock(&adap->devnode.lock);
-	list_for_each_entry(fh, &adap->devnode.fhs, list)
-		if (fh->mode_follower == CEC_MODE_MONITOR_PIN)
-			cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
-	mutex_unlock(&adap->devnode.lock);
-}
-EXPORT_SYMBOL_GPL(cec_queue_pin_cec_event);
-
-/* Notify userspace that the HPD pin changed state at the given time. */
-void cec_queue_pin_hpd_event(struct cec_adapter *adap, bool is_high, ktime_t ts)
-{
-	struct cec_event ev = {
-		.event = is_high ? CEC_EVENT_PIN_HPD_HIGH :
-				   CEC_EVENT_PIN_HPD_LOW,
-	};
-	struct cec_fh *fh;
-
-	mutex_lock(&adap->devnode.lock);
-	list_for_each_entry(fh, &adap->devnode.fhs, list)
-		cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
-	mutex_unlock(&adap->devnode.lock);
-}
-EXPORT_SYMBOL_GPL(cec_queue_pin_hpd_event);
-
-/* Notify userspace that the 5V pin changed state at the given time. */
-void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts)
-{
-	struct cec_event ev = {
-		.event = is_high ? CEC_EVENT_PIN_5V_HIGH :
-				   CEC_EVENT_PIN_5V_LOW,
-	};
-	struct cec_fh *fh;
-
-	mutex_lock(&adap->devnode.lock);
-	list_for_each_entry(fh, &adap->devnode.fhs, list)
-		cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
-	mutex_unlock(&adap->devnode.lock);
-}
-EXPORT_SYMBOL_GPL(cec_queue_pin_5v_event);
-
-/*
- * Queue a new message for this filehandle.
- *
- * We keep a queue of at most CEC_MAX_MSG_RX_QUEUE_SZ messages. If the
- * queue becomes full, then drop the oldest message and keep track
- * of how many messages we've dropped.
- */
-static void cec_queue_msg_fh(struct cec_fh *fh, const struct cec_msg *msg)
-{
-	static const struct cec_event ev_lost_msgs = {
-		.event = CEC_EVENT_LOST_MSGS,
-		.flags = 0,
-		{
-			.lost_msgs = { 1 },
-		},
-	};
-	struct cec_msg_entry *entry;
-
-	mutex_lock(&fh->lock);
-	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
-	if (entry) {
-		entry->msg = *msg;
-		/* Add new msg at the end of the queue */
-		list_add_tail(&entry->list, &fh->msgs);
-
-		if (fh->queued_msgs < CEC_MAX_MSG_RX_QUEUE_SZ) {
-			/* All is fine if there is enough room */
-			fh->queued_msgs++;
-			mutex_unlock(&fh->lock);
-			wake_up_interruptible(&fh->wait);
-			return;
-		}
-
-		/*
-		 * if the message queue is full, then drop the oldest one and
-		 * send a lost message event.
-		 */
-		entry = list_first_entry(&fh->msgs, struct cec_msg_entry, list);
-		list_del(&entry->list);
-		kfree(entry);
-	}
-	mutex_unlock(&fh->lock);
-
-	/*
-	 * We lost a message, either because kmalloc failed or the queue
-	 * was full.
-	 */
-	cec_queue_event_fh(fh, &ev_lost_msgs, ktime_get_ns());
-}
-
-/*
- * Queue the message for those filehandles that are in monitor mode.
- * If valid_la is true (this message is for us or was sent by us),
- * then pass it on to any monitoring filehandle. If this message
- * isn't for us or from us, then only give it to filehandles that
- * are in MONITOR_ALL mode.
- *
- * This can only happen if the CEC_CAP_MONITOR_ALL capability is
- * set and the CEC adapter was placed in 'monitor all' mode.
- */
-static void cec_queue_msg_monitor(struct cec_adapter *adap,
-				  const struct cec_msg *msg,
-				  bool valid_la)
-{
-	struct cec_fh *fh;
-	u32 monitor_mode = valid_la ? CEC_MODE_MONITOR :
-				      CEC_MODE_MONITOR_ALL;
-
-	mutex_lock(&adap->devnode.lock);
-	list_for_each_entry(fh, &adap->devnode.fhs, list) {
-		if (fh->mode_follower >= monitor_mode)
-			cec_queue_msg_fh(fh, msg);
-	}
-	mutex_unlock(&adap->devnode.lock);
-}
-
-/*
- * Queue the message for follower filehandles.
- */
-static void cec_queue_msg_followers(struct cec_adapter *adap,
-				    const struct cec_msg *msg)
-{
-	struct cec_fh *fh;
-
-	mutex_lock(&adap->devnode.lock);
-	list_for_each_entry(fh, &adap->devnode.fhs, list) {
-		if (fh->mode_follower == CEC_MODE_FOLLOWER)
-			cec_queue_msg_fh(fh, msg);
-	}
-	mutex_unlock(&adap->devnode.lock);
-}
-
-/* Notify userspace of an adapter state change. */
-static void cec_post_state_event(struct cec_adapter *adap)
-{
-	struct cec_event ev = {
-		.event = CEC_EVENT_STATE_CHANGE,
-	};
-
-	ev.state_change.phys_addr = adap->phys_addr;
-	ev.state_change.log_addr_mask = adap->log_addrs.log_addr_mask;
-	ev.state_change.have_conn_info =
-		adap->conn_info.type != CEC_CONNECTOR_TYPE_NO_CONNECTOR;
-	cec_queue_event(adap, &ev);
-}
-
-/*
- * A CEC transmit (and a possible wait for reply) completed.
- * If this was in blocking mode, then complete it, otherwise
- * queue the message for userspace to dequeue later.
- *
- * This function is called with adap->lock held.
- */
-static void cec_data_completed(struct cec_data *data)
-{
-	/*
-	 * Delete this transmit from the filehandle's xfer_list since
-	 * we're done with it.
-	 *
-	 * Note that if the filehandle is closed before this transmit
-	 * finished, then the release() function will set data->fh to NULL.
-	 * Without that we would be referring to a closed filehandle.
-	 */
-	if (data->fh)
-		list_del(&data->xfer_list);
-
-	if (data->blocking) {
-		/*
-		 * Someone is blocking so mark the message as completed
-		 * and call complete.
-		 */
-		data->completed = true;
-		complete(&data->c);
-	} else {
-		/*
-		 * No blocking, so just queue the message if needed and
-		 * free the memory.
-		 */
-		if (data->fh)
-			cec_queue_msg_fh(data->fh, &data->msg);
-		kfree(data);
-	}
-}
-
-/*
- * A pending CEC transmit needs to be cancelled, either because the CEC
- * adapter is disabled or the transmit takes an impossibly long time to
- * finish.
- *
- * This function is called with adap->lock held.
- */
-static void cec_data_cancel(struct cec_data *data, u8 tx_status)
-{
-	/*
-	 * It's either the current transmit, or it is a pending
-	 * transmit. Take the appropriate action to clear it.
-	 */
-	if (data->adap->transmitting == data) {
-		data->adap->transmitting = NULL;
-	} else {
-		list_del_init(&data->list);
-		if (!(data->msg.tx_status & CEC_TX_STATUS_OK))
-			if (!WARN_ON(!data->adap->transmit_queue_sz))
-				data->adap->transmit_queue_sz--;
-	}
-
-	if (data->msg.tx_status & CEC_TX_STATUS_OK) {
-		data->msg.rx_ts = ktime_get_ns();
-		data->msg.rx_status = CEC_RX_STATUS_ABORTED;
-	} else {
-		data->msg.tx_ts = ktime_get_ns();
-		data->msg.tx_status |= tx_status |
-				       CEC_TX_STATUS_MAX_RETRIES;
-		data->msg.tx_error_cnt++;
-		data->attempts = 0;
-	}
-
-	/* Queue transmitted message for monitoring purposes */
-	cec_queue_msg_monitor(data->adap, &data->msg, 1);
-
-	cec_data_completed(data);
-}
-
-/*
- * Flush all pending transmits and cancel any pending timeout work.
- *
- * This function is called with adap->lock held.
- */
-static void cec_flush(struct cec_adapter *adap)
-{
-	struct cec_data *data, *n;
-
-	/*
-	 * If the adapter is disabled, or we're asked to stop,
-	 * then cancel any pending transmits.
-	 */
-	while (!list_empty(&adap->transmit_queue)) {
-		data = list_first_entry(&adap->transmit_queue,
-					struct cec_data, list);
-		cec_data_cancel(data, CEC_TX_STATUS_ABORTED);
-	}
-	if (adap->transmitting)
-		cec_data_cancel(adap->transmitting, CEC_TX_STATUS_ABORTED);
-
-	/* Cancel the pending timeout work. */
-	list_for_each_entry_safe(data, n, &adap->wait_queue, list) {
-		if (cancel_delayed_work(&data->work))
-			cec_data_cancel(data, CEC_TX_STATUS_OK);
-		/*
-		 * If cancel_delayed_work returned false, then
-		 * the cec_wait_timeout function is running,
-		 * which will call cec_data_completed. So no
-		 * need to do anything special in that case.
-		 */
-	}
-	/*
-	 * If something went wrong and this counter isn't what it should
-	 * be, then this will reset it back to 0. Warn if it is not 0,
-	 * since it indicates a bug, either in this framework or in a
-	 * CEC driver.
-	 */
-	if (WARN_ON(adap->transmit_queue_sz))
-		adap->transmit_queue_sz = 0;
-}
-
-/*
- * Main CEC state machine
- *
- * Wait until the thread should be stopped, or we are not transmitting and
- * a new transmit message is queued up, in which case we start transmitting
- * that message. When the adapter finished transmitting the message it will
- * call cec_transmit_done().
- *
- * If the adapter is disabled, then remove all queued messages instead.
- *
- * If the current transmit times out, then cancel that transmit.
- */
-int cec_thread_func(void *_adap)
-{
-	struct cec_adapter *adap = _adap;
-
-	for (;;) {
-		unsigned int signal_free_time;
-		struct cec_data *data;
-		bool timeout = false;
-		u8 attempts;
-
-		if (adap->transmit_in_progress) {
-			int err;
-
-			/*
-			 * We are transmitting a message, so add a timeout
-			 * to prevent the state machine to get stuck waiting
-			 * for this message to finalize and add a check to
-			 * see if the adapter is disabled in which case the
-			 * transmit should be canceled.
-			 */
-			err = wait_event_interruptible_timeout(adap->kthread_waitq,
-				(adap->needs_hpd &&
-				 (!adap->is_configured && !adap->is_configuring)) ||
-				kthread_should_stop() ||
-				(!adap->transmit_in_progress &&
-				 !list_empty(&adap->transmit_queue)),
-				msecs_to_jiffies(CEC_XFER_TIMEOUT_MS));
-			timeout = err == 0;
-		} else {
-			/* Otherwise we just wait for something to happen. */
-			wait_event_interruptible(adap->kthread_waitq,
-				kthread_should_stop() ||
-				(!adap->transmit_in_progress &&
-				 !list_empty(&adap->transmit_queue)));
-		}
-
-		mutex_lock(&adap->lock);
-
-		if ((adap->needs_hpd &&
-		     (!adap->is_configured && !adap->is_configuring)) ||
-		    kthread_should_stop()) {
-			cec_flush(adap);
-			goto unlock;
-		}
-
-		if (adap->transmit_in_progress && timeout) {
-			/*
-			 * If we timeout, then log that. Normally this does
-			 * not happen and it is an indication of a faulty CEC
-			 * adapter driver, or the CEC bus is in some weird
-			 * state. On rare occasions it can happen if there is
-			 * so much traffic on the bus that the adapter was
-			 * unable to transmit for CEC_XFER_TIMEOUT_MS (2.1s).
-			 */
-			if (adap->transmitting) {
-				pr_warn("cec-%s: message %*ph timed out\n", adap->name,
-					adap->transmitting->msg.len,
-					adap->transmitting->msg.msg);
-				/* Just give up on this. */
-				cec_data_cancel(adap->transmitting,
-						CEC_TX_STATUS_TIMEOUT);
-			} else {
-				pr_warn("cec-%s: transmit timed out\n", adap->name);
-			}
-			adap->transmit_in_progress = false;
-			adap->tx_timeouts++;
-			goto unlock;
-		}
-
-		/*
-		 * If we are still transmitting, or there is nothing new to
-		 * transmit, then just continue waiting.
-		 */
-		if (adap->transmit_in_progress || list_empty(&adap->transmit_queue))
-			goto unlock;
-
-		/* Get a new message to transmit */
-		data = list_first_entry(&adap->transmit_queue,
-					struct cec_data, list);
-		list_del_init(&data->list);
-		if (!WARN_ON(!data->adap->transmit_queue_sz))
-			adap->transmit_queue_sz--;
-
-		/* Make this the current transmitting message */
-		adap->transmitting = data;
-
-		/*
-		 * Suggested number of attempts as per the CEC 2.0 spec:
-		 * 4 attempts is the default, except for 'secondary poll
-		 * messages', i.e. poll messages not sent during the adapter
-		 * configuration phase when it allocates logical addresses.
-		 */
-		if (data->msg.len == 1 && adap->is_configured)
-			attempts = 2;
-		else
-			attempts = 4;
-
-		/* Set the suggested signal free time */
-		if (data->attempts) {
-			/* should be >= 3 data bit periods for a retry */
-			signal_free_time = CEC_SIGNAL_FREE_TIME_RETRY;
-		} else if (adap->last_initiator !=
-			   cec_msg_initiator(&data->msg)) {
-			/* should be >= 5 data bit periods for new initiator */
-			signal_free_time = CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
-			adap->last_initiator = cec_msg_initiator(&data->msg);
-		} else {
-			/*
-			 * should be >= 7 data bit periods for sending another
-			 * frame immediately after another.
-			 */
-			signal_free_time = CEC_SIGNAL_FREE_TIME_NEXT_XFER;
-		}
-		if (data->attempts == 0)
-			data->attempts = attempts;
-
-		/* Tell the adapter to transmit, cancel on error */
-		if (adap->ops->adap_transmit(adap, data->attempts,
-					     signal_free_time, &data->msg))
-			cec_data_cancel(data, CEC_TX_STATUS_ABORTED);
-		else
-			adap->transmit_in_progress = true;
-
-unlock:
-		mutex_unlock(&adap->lock);
-
-		if (kthread_should_stop())
-			break;
-	}
-	return 0;
-}
-
-/*
- * Called by the CEC adapter if a transmit finished.
- */
-void cec_transmit_done_ts(struct cec_adapter *adap, u8 status,
-			  u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt,
-			  u8 error_cnt, ktime_t ts)
-{
-	struct cec_data *data;
-	struct cec_msg *msg;
-	unsigned int attempts_made = arb_lost_cnt + nack_cnt +
-				     low_drive_cnt + error_cnt;
-
-	dprintk(2, "%s: status 0x%02x\n", __func__, status);
-	if (attempts_made < 1)
-		attempts_made = 1;
-
-	mutex_lock(&adap->lock);
-	data = adap->transmitting;
-	if (!data) {
-		/*
-		 * This might happen if a transmit was issued and the cable is
-		 * unplugged while the transmit is ongoing. Ignore this
-		 * transmit in that case.
-		 */
-		if (!adap->transmit_in_progress)
-			dprintk(1, "%s was called without an ongoing transmit!\n",
-				__func__);
-		adap->transmit_in_progress = false;
-		goto wake_thread;
-	}
-	adap->transmit_in_progress = false;
-
-	msg = &data->msg;
-
-	/* Drivers must fill in the status! */
-	WARN_ON(status == 0);
-	msg->tx_ts = ktime_to_ns(ts);
-	msg->tx_status |= status;
-	msg->tx_arb_lost_cnt += arb_lost_cnt;
-	msg->tx_nack_cnt += nack_cnt;
-	msg->tx_low_drive_cnt += low_drive_cnt;
-	msg->tx_error_cnt += error_cnt;
-
-	/* Mark that we're done with this transmit */
-	adap->transmitting = NULL;
-
-	/*
-	 * If there are still retry attempts left and there was an error and
-	 * the hardware didn't signal that it retried itself (by setting
-	 * CEC_TX_STATUS_MAX_RETRIES), then we will retry ourselves.
-	 */
-	if (data->attempts > attempts_made &&
-	    !(status & (CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_OK))) {
-		/* Retry this message */
-		data->attempts -= attempts_made;
-		if (msg->timeout)
-			dprintk(2, "retransmit: %*ph (attempts: %d, wait for 0x%02x)\n",
-				msg->len, msg->msg, data->attempts, msg->reply);
-		else
-			dprintk(2, "retransmit: %*ph (attempts: %d)\n",
-				msg->len, msg->msg, data->attempts);
-		/* Add the message in front of the transmit queue */
-		list_add(&data->list, &adap->transmit_queue);
-		adap->transmit_queue_sz++;
-		goto wake_thread;
-	}
-
-	data->attempts = 0;
-
-	/* Always set CEC_TX_STATUS_MAX_RETRIES on error */
-	if (!(status & CEC_TX_STATUS_OK))
-		msg->tx_status |= CEC_TX_STATUS_MAX_RETRIES;
-
-	/* Queue transmitted message for monitoring purposes */
-	cec_queue_msg_monitor(adap, msg, 1);
-
-	if ((status & CEC_TX_STATUS_OK) && adap->is_configured &&
-	    msg->timeout) {
-		/*
-		 * Queue the message into the wait queue if we want to wait
-		 * for a reply.
-		 */
-		list_add_tail(&data->list, &adap->wait_queue);
-		schedule_delayed_work(&data->work,
-				      msecs_to_jiffies(msg->timeout));
-	} else {
-		/* Otherwise we're done */
-		cec_data_completed(data);
-	}
-
-wake_thread:
-	/*
-	 * Wake up the main thread to see if another message is ready
-	 * for transmitting or to retry the current message.
-	 */
-	wake_up_interruptible(&adap->kthread_waitq);
-	mutex_unlock(&adap->lock);
-}
-EXPORT_SYMBOL_GPL(cec_transmit_done_ts);
-
-void cec_transmit_attempt_done_ts(struct cec_adapter *adap,
-				  u8 status, ktime_t ts)
-{
-	switch (status & ~CEC_TX_STATUS_MAX_RETRIES) {
-	case CEC_TX_STATUS_OK:
-		cec_transmit_done_ts(adap, status, 0, 0, 0, 0, ts);
-		return;
-	case CEC_TX_STATUS_ARB_LOST:
-		cec_transmit_done_ts(adap, status, 1, 0, 0, 0, ts);
-		return;
-	case CEC_TX_STATUS_NACK:
-		cec_transmit_done_ts(adap, status, 0, 1, 0, 0, ts);
-		return;
-	case CEC_TX_STATUS_LOW_DRIVE:
-		cec_transmit_done_ts(adap, status, 0, 0, 1, 0, ts);
-		return;
-	case CEC_TX_STATUS_ERROR:
-		cec_transmit_done_ts(adap, status, 0, 0, 0, 1, ts);
-		return;
-	default:
-		/* Should never happen */
-		WARN(1, "cec-%s: invalid status 0x%02x\n", adap->name, status);
-		return;
-	}
-}
-EXPORT_SYMBOL_GPL(cec_transmit_attempt_done_ts);
-
-/*
- * Called when waiting for a reply times out.
- */
-static void cec_wait_timeout(struct work_struct *work)
-{
-	struct cec_data *data = container_of(work, struct cec_data, work.work);
-	struct cec_adapter *adap = data->adap;
-
-	mutex_lock(&adap->lock);
-	/*
-	 * Sanity check in case the timeout and the arrival of the message
-	 * happened at the same time.
-	 */
-	if (list_empty(&data->list))
-		goto unlock;
-
-	/* Mark the message as timed out */
-	list_del_init(&data->list);
-	data->msg.rx_ts = ktime_get_ns();
-	data->msg.rx_status = CEC_RX_STATUS_TIMEOUT;
-	cec_data_completed(data);
-unlock:
-	mutex_unlock(&adap->lock);
-}
-
-/*
- * Transmit a message. The fh argument may be NULL if the transmit is not
- * associated with a specific filehandle.
- *
- * This function is called with adap->lock held.
- */
-int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg,
-			struct cec_fh *fh, bool block)
-{
-	struct cec_data *data;
-	bool is_raw = msg_is_raw(msg);
-
-	msg->rx_ts = 0;
-	msg->tx_ts = 0;
-	msg->rx_status = 0;
-	msg->tx_status = 0;
-	msg->tx_arb_lost_cnt = 0;
-	msg->tx_nack_cnt = 0;
-	msg->tx_low_drive_cnt = 0;
-	msg->tx_error_cnt = 0;
-	msg->sequence = 0;
-
-	if (msg->reply && msg->timeout == 0) {
-		/* Make sure the timeout isn't 0. */
-		msg->timeout = 1000;
-	}
-	msg->flags &= CEC_MSG_FL_REPLY_TO_FOLLOWERS | CEC_MSG_FL_RAW;
-
-	if (!msg->timeout)
-		msg->flags &= ~CEC_MSG_FL_REPLY_TO_FOLLOWERS;
-
-	/* Sanity checks */
-	if (msg->len == 0 || msg->len > CEC_MAX_MSG_SIZE) {
-		dprintk(1, "%s: invalid length %d\n", __func__, msg->len);
-		return -EINVAL;
-	}
-
-	memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
-
-	if (msg->timeout)
-		dprintk(2, "%s: %*ph (wait for 0x%02x%s)\n",
-			__func__, msg->len, msg->msg, msg->reply,
-			!block ? ", nb" : "");
-	else
-		dprintk(2, "%s: %*ph%s\n",
-			__func__, msg->len, msg->msg, !block ? " (nb)" : "");
-
-	if (msg->timeout && msg->len == 1) {
-		dprintk(1, "%s: can't reply to poll msg\n", __func__);
-		return -EINVAL;
-	}
-
-	if (is_raw) {
-		if (!capable(CAP_SYS_RAWIO))
-			return -EPERM;
-	} else {
-		/* A CDC-Only device can only send CDC messages */
-		if ((adap->log_addrs.flags & CEC_LOG_ADDRS_FL_CDC_ONLY) &&
-		    (msg->len == 1 || msg->msg[1] != CEC_MSG_CDC_MESSAGE)) {
-			dprintk(1, "%s: not a CDC message\n", __func__);
-			return -EINVAL;
-		}
-
-		if (msg->len >= 4 && msg->msg[1] == CEC_MSG_CDC_MESSAGE) {
-			msg->msg[2] = adap->phys_addr >> 8;
-			msg->msg[3] = adap->phys_addr & 0xff;
-		}
-
-		if (msg->len == 1) {
-			if (cec_msg_destination(msg) == 0xf) {
-				dprintk(1, "%s: invalid poll message\n",
-					__func__);
-				return -EINVAL;
-			}
-			if (cec_has_log_addr(adap, cec_msg_destination(msg))) {
-				/*
-				 * If the destination is a logical address our
-				 * adapter has already claimed, then just NACK
-				 * this. It depends on the hardware what it will
-				 * do with a POLL to itself (some OK this), so
-				 * it is just as easy to handle it here so the
-				 * behavior will be consistent.
-				 */
-				msg->tx_ts = ktime_get_ns();
-				msg->tx_status = CEC_TX_STATUS_NACK |
-					CEC_TX_STATUS_MAX_RETRIES;
-				msg->tx_nack_cnt = 1;
-				msg->sequence = ++adap->sequence;
-				if (!msg->sequence)
-					msg->sequence = ++adap->sequence;
-				return 0;
-			}
-		}
-		if (msg->len > 1 && !cec_msg_is_broadcast(msg) &&
-		    cec_has_log_addr(adap, cec_msg_destination(msg))) {
-			dprintk(1, "%s: destination is the adapter itself\n",
-				__func__);
-			return -EINVAL;
-		}
-		if (msg->len > 1 && adap->is_configured &&
-		    !cec_has_log_addr(adap, cec_msg_initiator(msg))) {
-			dprintk(1, "%s: initiator has unknown logical address %d\n",
-				__func__, cec_msg_initiator(msg));
-			return -EINVAL;
-		}
-		/*
-		 * Special case: allow Ping and IMAGE/TEXT_VIEW_ON to be
-		 * transmitted to a TV, even if the adapter is unconfigured.
-		 * This makes it possible to detect or wake up displays that
-		 * pull down the HPD when in standby.
-		 */
-		if (!adap->is_configured && !adap->is_configuring &&
-		    (msg->len > 2 ||
-		     cec_msg_destination(msg) != CEC_LOG_ADDR_TV ||
-		     (msg->len == 2 && msg->msg[1] != CEC_MSG_IMAGE_VIEW_ON &&
-		      msg->msg[1] != CEC_MSG_TEXT_VIEW_ON))) {
-			dprintk(1, "%s: adapter is unconfigured\n", __func__);
-			return -ENONET;
-		}
-	}
-
-	if (!adap->is_configured && !adap->is_configuring) {
-		if (adap->needs_hpd) {
-			dprintk(1, "%s: adapter is unconfigured and needs HPD\n",
-				__func__);
-			return -ENONET;
-		}
-		if (msg->reply) {
-			dprintk(1, "%s: invalid msg->reply\n", __func__);
-			return -EINVAL;
-		}
-	}
-
-	if (adap->transmit_queue_sz >= CEC_MAX_MSG_TX_QUEUE_SZ) {
-		dprintk(2, "%s: transmit queue full\n", __func__);
-		return -EBUSY;
-	}
-
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	msg->sequence = ++adap->sequence;
-	if (!msg->sequence)
-		msg->sequence = ++adap->sequence;
-
-	data->msg = *msg;
-	data->fh = fh;
-	data->adap = adap;
-	data->blocking = block;
-
-	init_completion(&data->c);
-	INIT_DELAYED_WORK(&data->work, cec_wait_timeout);
-
-	if (fh)
-		list_add_tail(&data->xfer_list, &fh->xfer_list);
-
-	list_add_tail(&data->list, &adap->transmit_queue);
-	adap->transmit_queue_sz++;
-	if (!adap->transmitting)
-		wake_up_interruptible(&adap->kthread_waitq);
-
-	/* All done if we don't need to block waiting for completion */
-	if (!block)
-		return 0;
-
-	/*
-	 * Release the lock and wait, retake the lock afterwards.
-	 */
-	mutex_unlock(&adap->lock);
-	wait_for_completion_killable(&data->c);
-	if (!data->completed)
-		cancel_delayed_work_sync(&data->work);
-	mutex_lock(&adap->lock);
-
-	/* Cancel the transmit if it was interrupted */
-	if (!data->completed)
-		cec_data_cancel(data, CEC_TX_STATUS_ABORTED);
-
-	/* The transmit completed (possibly with an error) */
-	*msg = data->msg;
-	kfree(data);
-	return 0;
-}
-
-/* Helper function to be used by drivers and this framework. */
-int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
-		     bool block)
-{
-	int ret;
-
-	mutex_lock(&adap->lock);
-	ret = cec_transmit_msg_fh(adap, msg, NULL, block);
-	mutex_unlock(&adap->lock);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(cec_transmit_msg);
-
-/*
- * I don't like forward references but without this the low-level
- * cec_received_msg() function would come after a bunch of high-level
- * CEC protocol handling functions. That was very confusing.
- */
-static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
-			      bool is_reply);
-
-#define DIRECTED	0x80
-#define BCAST1_4	0x40
-#define BCAST2_0	0x20	/* broadcast only allowed for >= 2.0 */
-#define BCAST		(BCAST1_4 | BCAST2_0)
-#define BOTH		(BCAST | DIRECTED)
-
-/*
- * Specify minimum length and whether the message is directed, broadcast
- * or both. Messages that do not match the criteria are ignored as per
- * the CEC specification.
- */
-static const u8 cec_msg_size[256] = {
-	[CEC_MSG_ACTIVE_SOURCE] = 4 | BCAST,
-	[CEC_MSG_IMAGE_VIEW_ON] = 2 | DIRECTED,
-	[CEC_MSG_TEXT_VIEW_ON] = 2 | DIRECTED,
-	[CEC_MSG_INACTIVE_SOURCE] = 4 | DIRECTED,
-	[CEC_MSG_REQUEST_ACTIVE_SOURCE] = 2 | BCAST,
-	[CEC_MSG_ROUTING_CHANGE] = 6 | BCAST,
-	[CEC_MSG_ROUTING_INFORMATION] = 4 | BCAST,
-	[CEC_MSG_SET_STREAM_PATH] = 4 | BCAST,
-	[CEC_MSG_STANDBY] = 2 | BOTH,
-	[CEC_MSG_RECORD_OFF] = 2 | DIRECTED,
-	[CEC_MSG_RECORD_ON] = 3 | DIRECTED,
-	[CEC_MSG_RECORD_STATUS] = 3 | DIRECTED,
-	[CEC_MSG_RECORD_TV_SCREEN] = 2 | DIRECTED,
-	[CEC_MSG_CLEAR_ANALOGUE_TIMER] = 13 | DIRECTED,
-	[CEC_MSG_CLEAR_DIGITAL_TIMER] = 16 | DIRECTED,
-	[CEC_MSG_CLEAR_EXT_TIMER] = 13 | DIRECTED,
-	[CEC_MSG_SET_ANALOGUE_TIMER] = 13 | DIRECTED,
-	[CEC_MSG_SET_DIGITAL_TIMER] = 16 | DIRECTED,
-	[CEC_MSG_SET_EXT_TIMER] = 13 | DIRECTED,
-	[CEC_MSG_SET_TIMER_PROGRAM_TITLE] = 2 | DIRECTED,
-	[CEC_MSG_TIMER_CLEARED_STATUS] = 3 | DIRECTED,
-	[CEC_MSG_TIMER_STATUS] = 3 | DIRECTED,
-	[CEC_MSG_CEC_VERSION] = 3 | DIRECTED,
-	[CEC_MSG_GET_CEC_VERSION] = 2 | DIRECTED,
-	[CEC_MSG_GIVE_PHYSICAL_ADDR] = 2 | DIRECTED,
-	[CEC_MSG_GET_MENU_LANGUAGE] = 2 | DIRECTED,
-	[CEC_MSG_REPORT_PHYSICAL_ADDR] = 5 | BCAST,
-	[CEC_MSG_SET_MENU_LANGUAGE] = 5 | BCAST,
-	[CEC_MSG_REPORT_FEATURES] = 6 | BCAST,
-	[CEC_MSG_GIVE_FEATURES] = 2 | DIRECTED,
-	[CEC_MSG_DECK_CONTROL] = 3 | DIRECTED,
-	[CEC_MSG_DECK_STATUS] = 3 | DIRECTED,
-	[CEC_MSG_GIVE_DECK_STATUS] = 3 | DIRECTED,
-	[CEC_MSG_PLAY] = 3 | DIRECTED,
-	[CEC_MSG_GIVE_TUNER_DEVICE_STATUS] = 3 | DIRECTED,
-	[CEC_MSG_SELECT_ANALOGUE_SERVICE] = 6 | DIRECTED,
-	[CEC_MSG_SELECT_DIGITAL_SERVICE] = 9 | DIRECTED,
-	[CEC_MSG_TUNER_DEVICE_STATUS] = 7 | DIRECTED,
-	[CEC_MSG_TUNER_STEP_DECREMENT] = 2 | DIRECTED,
-	[CEC_MSG_TUNER_STEP_INCREMENT] = 2 | DIRECTED,
-	[CEC_MSG_DEVICE_VENDOR_ID] = 5 | BCAST,
-	[CEC_MSG_GIVE_DEVICE_VENDOR_ID] = 2 | DIRECTED,
-	[CEC_MSG_VENDOR_COMMAND] = 2 | DIRECTED,
-	[CEC_MSG_VENDOR_COMMAND_WITH_ID] = 5 | BOTH,
-	[CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN] = 2 | BOTH,
-	[CEC_MSG_VENDOR_REMOTE_BUTTON_UP] = 2 | BOTH,
-	[CEC_MSG_SET_OSD_STRING] = 3 | DIRECTED,
-	[CEC_MSG_GIVE_OSD_NAME] = 2 | DIRECTED,
-	[CEC_MSG_SET_OSD_NAME] = 2 | DIRECTED,
-	[CEC_MSG_MENU_REQUEST] = 3 | DIRECTED,
-	[CEC_MSG_MENU_STATUS] = 3 | DIRECTED,
-	[CEC_MSG_USER_CONTROL_PRESSED] = 3 | DIRECTED,
-	[CEC_MSG_USER_CONTROL_RELEASED] = 2 | DIRECTED,
-	[CEC_MSG_GIVE_DEVICE_POWER_STATUS] = 2 | DIRECTED,
-	[CEC_MSG_REPORT_POWER_STATUS] = 3 | DIRECTED | BCAST2_0,
-	[CEC_MSG_FEATURE_ABORT] = 4 | DIRECTED,
-	[CEC_MSG_ABORT] = 2 | DIRECTED,
-	[CEC_MSG_GIVE_AUDIO_STATUS] = 2 | DIRECTED,
-	[CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS] = 2 | DIRECTED,
-	[CEC_MSG_REPORT_AUDIO_STATUS] = 3 | DIRECTED,
-	[CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED,
-	[CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED,
-	[CEC_MSG_SET_SYSTEM_AUDIO_MODE] = 3 | BOTH,
-	[CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST] = 2 | DIRECTED,
-	[CEC_MSG_SYSTEM_AUDIO_MODE_STATUS] = 3 | DIRECTED,
-	[CEC_MSG_SET_AUDIO_RATE] = 3 | DIRECTED,
-	[CEC_MSG_INITIATE_ARC] = 2 | DIRECTED,
-	[CEC_MSG_REPORT_ARC_INITIATED] = 2 | DIRECTED,
-	[CEC_MSG_REPORT_ARC_TERMINATED] = 2 | DIRECTED,
-	[CEC_MSG_REQUEST_ARC_INITIATION] = 2 | DIRECTED,
-	[CEC_MSG_REQUEST_ARC_TERMINATION] = 2 | DIRECTED,
-	[CEC_MSG_TERMINATE_ARC] = 2 | DIRECTED,
-	[CEC_MSG_REQUEST_CURRENT_LATENCY] = 4 | BCAST,
-	[CEC_MSG_REPORT_CURRENT_LATENCY] = 6 | BCAST,
-	[CEC_MSG_CDC_MESSAGE] = 2 | BCAST,
-};
-
-/* Called by the CEC adapter if a message is received */
-void cec_received_msg_ts(struct cec_adapter *adap,
-			 struct cec_msg *msg, ktime_t ts)
-{
-	struct cec_data *data;
-	u8 msg_init = cec_msg_initiator(msg);
-	u8 msg_dest = cec_msg_destination(msg);
-	u8 cmd = msg->msg[1];
-	bool is_reply = false;
-	bool valid_la = true;
-	u8 min_len = 0;
-
-	if (WARN_ON(!msg->len || msg->len > CEC_MAX_MSG_SIZE))
-		return;
-
-	/*
-	 * Some CEC adapters will receive the messages that they transmitted.
-	 * This test filters out those messages by checking if we are the
-	 * initiator, and just returning in that case.
-	 *
-	 * Note that this won't work if this is an Unregistered device.
-	 *
-	 * It is bad practice if the hardware receives the message that it
-	 * transmitted and luckily most CEC adapters behave correctly in this
-	 * respect.
-	 */
-	if (msg_init != CEC_LOG_ADDR_UNREGISTERED &&
-	    cec_has_log_addr(adap, msg_init))
-		return;
-
-	msg->rx_ts = ktime_to_ns(ts);
-	msg->rx_status = CEC_RX_STATUS_OK;
-	msg->sequence = msg->reply = msg->timeout = 0;
-	msg->tx_status = 0;
-	msg->tx_ts = 0;
-	msg->tx_arb_lost_cnt = 0;
-	msg->tx_nack_cnt = 0;
-	msg->tx_low_drive_cnt = 0;
-	msg->tx_error_cnt = 0;
-	msg->flags = 0;
-	memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
-
-	mutex_lock(&adap->lock);
-	dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
-
-	adap->last_initiator = 0xff;
-
-	/* Check if this message was for us (directed or broadcast). */
-	if (!cec_msg_is_broadcast(msg))
-		valid_la = cec_has_log_addr(adap, msg_dest);
-
-	/*
-	 * Check if the length is not too short or if the message is a
-	 * broadcast message where a directed message was expected or
-	 * vice versa. If so, then the message has to be ignored (according
-	 * to section CEC 7.3 and CEC 12.2).
-	 */
-	if (valid_la && msg->len > 1 && cec_msg_size[cmd]) {
-		u8 dir_fl = cec_msg_size[cmd] & BOTH;
-
-		min_len = cec_msg_size[cmd] & 0x1f;
-		if (msg->len < min_len)
-			valid_la = false;
-		else if (!cec_msg_is_broadcast(msg) && !(dir_fl & DIRECTED))
-			valid_la = false;
-		else if (cec_msg_is_broadcast(msg) && !(dir_fl & BCAST))
-			valid_la = false;
-		else if (cec_msg_is_broadcast(msg) &&
-			 adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0 &&
-			 !(dir_fl & BCAST1_4))
-			valid_la = false;
-	}
-	if (valid_la && min_len) {
-		/* These messages have special length requirements */
-		switch (cmd) {
-		case CEC_MSG_TIMER_STATUS:
-			if (msg->msg[2] & 0x10) {
-				switch (msg->msg[2] & 0xf) {
-				case CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE:
-				case CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE:
-					if (msg->len < 5)
-						valid_la = false;
-					break;
-				}
-			} else if ((msg->msg[2] & 0xf) == CEC_OP_PROG_ERROR_DUPLICATE) {
-				if (msg->len < 5)
-					valid_la = false;
-			}
-			break;
-		case CEC_MSG_RECORD_ON:
-			switch (msg->msg[2]) {
-			case CEC_OP_RECORD_SRC_OWN:
-				break;
-			case CEC_OP_RECORD_SRC_DIGITAL:
-				if (msg->len < 10)
-					valid_la = false;
-				break;
-			case CEC_OP_RECORD_SRC_ANALOG:
-				if (msg->len < 7)
-					valid_la = false;
-				break;
-			case CEC_OP_RECORD_SRC_EXT_PLUG:
-				if (msg->len < 4)
-					valid_la = false;
-				break;
-			case CEC_OP_RECORD_SRC_EXT_PHYS_ADDR:
-				if (msg->len < 5)
-					valid_la = false;
-				break;
-			}
-			break;
-		}
-	}
-
-	/* It's a valid message and not a poll or CDC message */
-	if (valid_la && msg->len > 1 && cmd != CEC_MSG_CDC_MESSAGE) {
-		bool abort = cmd == CEC_MSG_FEATURE_ABORT;
-
-		/* The aborted command is in msg[2] */
-		if (abort)
-			cmd = msg->msg[2];
-
-		/*
-		 * Walk over all transmitted messages that are waiting for a
-		 * reply.
-		 */
-		list_for_each_entry(data, &adap->wait_queue, list) {
-			struct cec_msg *dst = &data->msg;
-
-			/*
-			 * The *only* CEC message that has two possible replies
-			 * is CEC_MSG_INITIATE_ARC.
-			 * In this case allow either of the two replies.
-			 */
-			if (!abort && dst->msg[1] == CEC_MSG_INITIATE_ARC &&
-			    (cmd == CEC_MSG_REPORT_ARC_INITIATED ||
-			     cmd == CEC_MSG_REPORT_ARC_TERMINATED) &&
-			    (dst->reply == CEC_MSG_REPORT_ARC_INITIATED ||
-			     dst->reply == CEC_MSG_REPORT_ARC_TERMINATED))
-				dst->reply = cmd;
-
-			/* Does the command match? */
-			if ((abort && cmd != dst->msg[1]) ||
-			    (!abort && cmd != dst->reply))
-				continue;
-
-			/* Does the addressing match? */
-			if (msg_init != cec_msg_destination(dst) &&
-			    !cec_msg_is_broadcast(dst))
-				continue;
-
-			/* We got a reply */
-			memcpy(dst->msg, msg->msg, msg->len);
-			dst->len = msg->len;
-			dst->rx_ts = msg->rx_ts;
-			dst->rx_status = msg->rx_status;
-			if (abort)
-				dst->rx_status |= CEC_RX_STATUS_FEATURE_ABORT;
-			msg->flags = dst->flags;
-			/* Remove it from the wait_queue */
-			list_del_init(&data->list);
-
-			/* Cancel the pending timeout work */
-			if (!cancel_delayed_work(&data->work)) {
-				mutex_unlock(&adap->lock);
-				flush_scheduled_work();
-				mutex_lock(&adap->lock);
-			}
-			/*
-			 * Mark this as a reply, provided someone is still
-			 * waiting for the answer.
-			 */
-			if (data->fh)
-				is_reply = true;
-			cec_data_completed(data);
-			break;
-		}
-	}
-	mutex_unlock(&adap->lock);
-
-	/* Pass the message on to any monitoring filehandles */
-	cec_queue_msg_monitor(adap, msg, valid_la);
-
-	/* We're done if it is not for us or a poll message */
-	if (!valid_la || msg->len <= 1)
-		return;
-
-	if (adap->log_addrs.log_addr_mask == 0)
-		return;
-
-	/*
-	 * Process the message on the protocol level. If is_reply is true,
-	 * then cec_receive_notify() won't pass on the reply to the listener(s)
-	 * since that was already done by cec_data_completed() above.
-	 */
-	cec_receive_notify(adap, msg, is_reply);
-}
-EXPORT_SYMBOL_GPL(cec_received_msg_ts);
-
-/* Logical Address Handling */
-
-/*
- * Attempt to claim a specific logical address.
- *
- * This function is called with adap->lock held.
- */
-static int cec_config_log_addr(struct cec_adapter *adap,
-			       unsigned int idx,
-			       unsigned int log_addr)
-{
-	struct cec_log_addrs *las = &adap->log_addrs;
-	struct cec_msg msg = { };
-	const unsigned int max_retries = 2;
-	unsigned int i;
-	int err;
-
-	if (cec_has_log_addr(adap, log_addr))
-		return 0;
-
-	/* Send poll message */
-	msg.len = 1;
-	msg.msg[0] = (log_addr << 4) | log_addr;
-
-	for (i = 0; i < max_retries; i++) {
-		err = cec_transmit_msg_fh(adap, &msg, NULL, true);
-
-		/*
-		 * While trying to poll the physical address was reset
-		 * and the adapter was unconfigured, so bail out.
-		 */
-		if (!adap->is_configuring)
-			return -EINTR;
-
-		if (err)
-			return err;
-
-		/*
-		 * The message was aborted due to a disconnect or
-		 * unconfigure, just bail out.
-		 */
-		if (msg.tx_status & CEC_TX_STATUS_ABORTED)
-			return -EINTR;
-		if (msg.tx_status & CEC_TX_STATUS_OK)
-			return 0;
-		if (msg.tx_status & CEC_TX_STATUS_NACK)
-			break;
-		/*
-		 * Retry up to max_retries times if the message was neither
-		 * OKed or NACKed. This can happen due to e.g. a Lost
-		 * Arbitration condition.
-		 */
-	}
-
-	/*
-	 * If we are unable to get an OK or a NACK after max_retries attempts
-	 * (and note that each attempt already consists of four polls), then
-	 * then we assume that something is really weird and that it is not a
-	 * good idea to try and claim this logical address.
-	 */
-	if (i == max_retries)
-		return 0;
-
-	/*
-	 * Message not acknowledged, so this logical
-	 * address is free to use.
-	 */
-	err = adap->ops->adap_log_addr(adap, log_addr);
-	if (err)
-		return err;
-
-	las->log_addr[idx] = log_addr;
-	las->log_addr_mask |= 1 << log_addr;
-	adap->phys_addrs[log_addr] = adap->phys_addr;
-	return 1;
-}
-
-/*
- * Unconfigure the adapter: clear all logical addresses and send
- * the state changed event.
- *
- * This function is called with adap->lock held.
- */
-static void cec_adap_unconfigure(struct cec_adapter *adap)
-{
-	if (!adap->needs_hpd ||
-	    adap->phys_addr != CEC_PHYS_ADDR_INVALID)
-		WARN_ON(adap->ops->adap_log_addr(adap, CEC_LOG_ADDR_INVALID));
-	adap->log_addrs.log_addr_mask = 0;
-	adap->is_configuring = false;
-	adap->is_configured = false;
-	memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs));
-	cec_flush(adap);
-	wake_up_interruptible(&adap->kthread_waitq);
-	cec_post_state_event(adap);
-}
-
-/*
- * Attempt to claim the required logical addresses.
- */
-static int cec_config_thread_func(void *arg)
-{
-	/* The various LAs for each type of device */
-	static const u8 tv_log_addrs[] = {
-		CEC_LOG_ADDR_TV, CEC_LOG_ADDR_SPECIFIC,
-		CEC_LOG_ADDR_INVALID
-	};
-	static const u8 record_log_addrs[] = {
-		CEC_LOG_ADDR_RECORD_1, CEC_LOG_ADDR_RECORD_2,
-		CEC_LOG_ADDR_RECORD_3,
-		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
-		CEC_LOG_ADDR_INVALID
-	};
-	static const u8 tuner_log_addrs[] = {
-		CEC_LOG_ADDR_TUNER_1, CEC_LOG_ADDR_TUNER_2,
-		CEC_LOG_ADDR_TUNER_3, CEC_LOG_ADDR_TUNER_4,
-		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
-		CEC_LOG_ADDR_INVALID
-	};
-	static const u8 playback_log_addrs[] = {
-		CEC_LOG_ADDR_PLAYBACK_1, CEC_LOG_ADDR_PLAYBACK_2,
-		CEC_LOG_ADDR_PLAYBACK_3,
-		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
-		CEC_LOG_ADDR_INVALID
-	};
-	static const u8 audiosystem_log_addrs[] = {
-		CEC_LOG_ADDR_AUDIOSYSTEM,
-		CEC_LOG_ADDR_INVALID
-	};
-	static const u8 specific_use_log_addrs[] = {
-		CEC_LOG_ADDR_SPECIFIC,
-		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
-		CEC_LOG_ADDR_INVALID
-	};
-	static const u8 *type2addrs[6] = {
-		[CEC_LOG_ADDR_TYPE_TV] = tv_log_addrs,
-		[CEC_LOG_ADDR_TYPE_RECORD] = record_log_addrs,
-		[CEC_LOG_ADDR_TYPE_TUNER] = tuner_log_addrs,
-		[CEC_LOG_ADDR_TYPE_PLAYBACK] = playback_log_addrs,
-		[CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = audiosystem_log_addrs,
-		[CEC_LOG_ADDR_TYPE_SPECIFIC] = specific_use_log_addrs,
-	};
-	static const u16 type2mask[] = {
-		[CEC_LOG_ADDR_TYPE_TV] = CEC_LOG_ADDR_MASK_TV,
-		[CEC_LOG_ADDR_TYPE_RECORD] = CEC_LOG_ADDR_MASK_RECORD,
-		[CEC_LOG_ADDR_TYPE_TUNER] = CEC_LOG_ADDR_MASK_TUNER,
-		[CEC_LOG_ADDR_TYPE_PLAYBACK] = CEC_LOG_ADDR_MASK_PLAYBACK,
-		[CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = CEC_LOG_ADDR_MASK_AUDIOSYSTEM,
-		[CEC_LOG_ADDR_TYPE_SPECIFIC] = CEC_LOG_ADDR_MASK_SPECIFIC,
-	};
-	struct cec_adapter *adap = arg;
-	struct cec_log_addrs *las = &adap->log_addrs;
-	int err;
-	int i, j;
-
-	mutex_lock(&adap->lock);
-	dprintk(1, "physical address: %x.%x.%x.%x, claim %d logical addresses\n",
-		cec_phys_addr_exp(adap->phys_addr), las->num_log_addrs);
-	las->log_addr_mask = 0;
-
-	if (las->log_addr_type[0] == CEC_LOG_ADDR_TYPE_UNREGISTERED)
-		goto configured;
-
-	for (i = 0; i < las->num_log_addrs; i++) {
-		unsigned int type = las->log_addr_type[i];
-		const u8 *la_list;
-		u8 last_la;
-
-		/*
-		 * The TV functionality can only map to physical address 0.
-		 * For any other address, try the Specific functionality
-		 * instead as per the spec.
-		 */
-		if (adap->phys_addr && type == CEC_LOG_ADDR_TYPE_TV)
-			type = CEC_LOG_ADDR_TYPE_SPECIFIC;
-
-		la_list = type2addrs[type];
-		last_la = las->log_addr[i];
-		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
-		if (last_la == CEC_LOG_ADDR_INVALID ||
-		    last_la == CEC_LOG_ADDR_UNREGISTERED ||
-		    !((1 << last_la) & type2mask[type]))
-			last_la = la_list[0];
-
-		err = cec_config_log_addr(adap, i, last_la);
-		if (err > 0) /* Reused last LA */
-			continue;
-
-		if (err < 0)
-			goto unconfigure;
-
-		for (j = 0; la_list[j] != CEC_LOG_ADDR_INVALID; j++) {
-			/* Tried this one already, skip it */
-			if (la_list[j] == last_la)
-				continue;
-			/* The backup addresses are CEC 2.0 specific */
-			if ((la_list[j] == CEC_LOG_ADDR_BACKUP_1 ||
-			     la_list[j] == CEC_LOG_ADDR_BACKUP_2) &&
-			    las->cec_version < CEC_OP_CEC_VERSION_2_0)
-				continue;
-
-			err = cec_config_log_addr(adap, i, la_list[j]);
-			if (err == 0) /* LA is in use */
-				continue;
-			if (err < 0)
-				goto unconfigure;
-			/* Done, claimed an LA */
-			break;
-		}
-
-		if (la_list[j] == CEC_LOG_ADDR_INVALID)
-			dprintk(1, "could not claim LA %d\n", i);
-	}
-
-	if (adap->log_addrs.log_addr_mask == 0 &&
-	    !(las->flags & CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK))
-		goto unconfigure;
-
-configured:
-	if (adap->log_addrs.log_addr_mask == 0) {
-		/* Fall back to unregistered */
-		las->log_addr[0] = CEC_LOG_ADDR_UNREGISTERED;
-		las->log_addr_mask = 1 << las->log_addr[0];
-		for (i = 1; i < las->num_log_addrs; i++)
-			las->log_addr[i] = CEC_LOG_ADDR_INVALID;
-	}
-	for (i = las->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++)
-		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
-	adap->is_configured = true;
-	adap->is_configuring = false;
-	cec_post_state_event(adap);
-
-	/*
-	 * Now post the Report Features and Report Physical Address broadcast
-	 * messages. Note that these are non-blocking transmits, meaning that
-	 * they are just queued up and once adap->lock is unlocked the main
-	 * thread will kick in and start transmitting these.
-	 *
-	 * If after this function is done (but before one or more of these
-	 * messages are actually transmitted) the CEC adapter is unconfigured,
-	 * then any remaining messages will be dropped by the main thread.
-	 */
-	for (i = 0; i < las->num_log_addrs; i++) {
-		struct cec_msg msg = {};
-
-		if (las->log_addr[i] == CEC_LOG_ADDR_INVALID ||
-		    (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY))
-			continue;
-
-		msg.msg[0] = (las->log_addr[i] << 4) | 0x0f;
-
-		/* Report Features must come first according to CEC 2.0 */
-		if (las->log_addr[i] != CEC_LOG_ADDR_UNREGISTERED &&
-		    adap->log_addrs.cec_version >= CEC_OP_CEC_VERSION_2_0) {
-			cec_fill_msg_report_features(adap, &msg, i);
-			cec_transmit_msg_fh(adap, &msg, NULL, false);
-		}
-
-		/* Report Physical Address */
-		cec_msg_report_physical_addr(&msg, adap->phys_addr,
-					     las->primary_device_type[i]);
-		dprintk(1, "config: la %d pa %x.%x.%x.%x\n",
-			las->log_addr[i],
-			cec_phys_addr_exp(adap->phys_addr));
-		cec_transmit_msg_fh(adap, &msg, NULL, false);
-
-		/* Report Vendor ID */
-		if (adap->log_addrs.vendor_id != CEC_VENDOR_ID_NONE) {
-			cec_msg_device_vendor_id(&msg,
-						 adap->log_addrs.vendor_id);
-			cec_transmit_msg_fh(adap, &msg, NULL, false);
-		}
-	}
-	adap->kthread_config = NULL;
-	complete(&adap->config_completion);
-	mutex_unlock(&adap->lock);
-	return 0;
-
-unconfigure:
-	for (i = 0; i < las->num_log_addrs; i++)
-		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
-	cec_adap_unconfigure(adap);
-	adap->kthread_config = NULL;
-	mutex_unlock(&adap->lock);
-	complete(&adap->config_completion);
-	return 0;
-}
-
-/*
- * Called from either __cec_s_phys_addr or __cec_s_log_addrs to claim the
- * logical addresses.
- *
- * This function is called with adap->lock held.
- */
-static void cec_claim_log_addrs(struct cec_adapter *adap, bool block)
-{
-	if (WARN_ON(adap->is_configuring || adap->is_configured))
-		return;
-
-	init_completion(&adap->config_completion);
-
-	/* Ready to kick off the thread */
-	adap->is_configuring = true;
-	adap->kthread_config = kthread_run(cec_config_thread_func, adap,
-					   "ceccfg-%s", adap->name);
-	if (IS_ERR(adap->kthread_config)) {
-		adap->kthread_config = NULL;
-	} else if (block) {
-		mutex_unlock(&adap->lock);
-		wait_for_completion(&adap->config_completion);
-		mutex_lock(&adap->lock);
-	}
-}
-
-/* Set a new physical address and send an event notifying userspace of this.
- *
- * This function is called with adap->lock held.
- */
-void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
-{
-	if (phys_addr == adap->phys_addr)
-		return;
-	if (phys_addr != CEC_PHYS_ADDR_INVALID && adap->devnode.unregistered)
-		return;
-
-	dprintk(1, "new physical address %x.%x.%x.%x\n",
-		cec_phys_addr_exp(phys_addr));
-	if (phys_addr == CEC_PHYS_ADDR_INVALID ||
-	    adap->phys_addr != CEC_PHYS_ADDR_INVALID) {
-		adap->phys_addr = CEC_PHYS_ADDR_INVALID;
-		cec_post_state_event(adap);
-		cec_adap_unconfigure(adap);
-		/* Disabling monitor all mode should always succeed */
-		if (adap->monitor_all_cnt)
-			WARN_ON(call_op(adap, adap_monitor_all_enable, false));
-		mutex_lock(&adap->devnode.lock);
-		if (adap->needs_hpd || list_empty(&adap->devnode.fhs)) {
-			WARN_ON(adap->ops->adap_enable(adap, false));
-			adap->transmit_in_progress = false;
-			wake_up_interruptible(&adap->kthread_waitq);
-		}
-		mutex_unlock(&adap->devnode.lock);
-		if (phys_addr == CEC_PHYS_ADDR_INVALID)
-			return;
-	}
-
-	mutex_lock(&adap->devnode.lock);
-	adap->last_initiator = 0xff;
-	adap->transmit_in_progress = false;
-
-	if ((adap->needs_hpd || list_empty(&adap->devnode.fhs)) &&
-	    adap->ops->adap_enable(adap, true)) {
-		mutex_unlock(&adap->devnode.lock);
-		return;
-	}
-
-	if (adap->monitor_all_cnt &&
-	    call_op(adap, adap_monitor_all_enable, true)) {
-		if (adap->needs_hpd || list_empty(&adap->devnode.fhs))
-			WARN_ON(adap->ops->adap_enable(adap, false));
-		mutex_unlock(&adap->devnode.lock);
-		return;
-	}
-	mutex_unlock(&adap->devnode.lock);
-
-	adap->phys_addr = phys_addr;
-	cec_post_state_event(adap);
-	if (adap->log_addrs.num_log_addrs)
-		cec_claim_log_addrs(adap, block);
-}
-
-void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
-{
-	if (IS_ERR_OR_NULL(adap))
-		return;
-
-	mutex_lock(&adap->lock);
-	__cec_s_phys_addr(adap, phys_addr, block);
-	mutex_unlock(&adap->lock);
-}
-EXPORT_SYMBOL_GPL(cec_s_phys_addr);
-
-void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
-			       const struct edid *edid)
-{
-	u16 pa = CEC_PHYS_ADDR_INVALID;
-
-	if (edid && edid->extensions)
-		pa = cec_get_edid_phys_addr((const u8 *)edid,
-				EDID_LENGTH * (edid->extensions + 1), NULL);
-	cec_s_phys_addr(adap, pa, false);
-}
-EXPORT_SYMBOL_GPL(cec_s_phys_addr_from_edid);
-
-void cec_s_conn_info(struct cec_adapter *adap,
-		     const struct cec_connector_info *conn_info)
-{
-	if (IS_ERR_OR_NULL(adap))
-		return;
-
-	if (!(adap->capabilities & CEC_CAP_CONNECTOR_INFO))
-		return;
-
-	mutex_lock(&adap->lock);
-	if (conn_info)
-		adap->conn_info = *conn_info;
-	else
-		memset(&adap->conn_info, 0, sizeof(adap->conn_info));
-	cec_post_state_event(adap);
-	mutex_unlock(&adap->lock);
-}
-EXPORT_SYMBOL_GPL(cec_s_conn_info);
-
-/*
- * Called from either the ioctl or a driver to set the logical addresses.
- *
- * This function is called with adap->lock held.
- */
-int __cec_s_log_addrs(struct cec_adapter *adap,
-		      struct cec_log_addrs *log_addrs, bool block)
-{
-	u16 type_mask = 0;
-	int i;
-
-	if (adap->devnode.unregistered)
-		return -ENODEV;
-
-	if (!log_addrs || log_addrs->num_log_addrs == 0) {
-		cec_adap_unconfigure(adap);
-		adap->log_addrs.num_log_addrs = 0;
-		for (i = 0; i < CEC_MAX_LOG_ADDRS; i++)
-			adap->log_addrs.log_addr[i] = CEC_LOG_ADDR_INVALID;
-		adap->log_addrs.osd_name[0] = '\0';
-		adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE;
-		adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0;
-		return 0;
-	}
-
-	if (log_addrs->flags & CEC_LOG_ADDRS_FL_CDC_ONLY) {
-		/*
-		 * Sanitize log_addrs fields if a CDC-Only device is
-		 * requested.
-		 */
-		log_addrs->num_log_addrs = 1;
-		log_addrs->osd_name[0] = '\0';
-		log_addrs->vendor_id = CEC_VENDOR_ID_NONE;
-		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
-		/*
-		 * This is just an internal convention since a CDC-Only device
-		 * doesn't have to be a switch. But switches already use
-		 * unregistered, so it makes some kind of sense to pick this
-		 * as the primary device. Since a CDC-Only device never sends
-		 * any 'normal' CEC messages this primary device type is never
-		 * sent over the CEC bus.
-		 */
-		log_addrs->primary_device_type[0] = CEC_OP_PRIM_DEVTYPE_SWITCH;
-		log_addrs->all_device_types[0] = 0;
-		log_addrs->features[0][0] = 0;
-		log_addrs->features[0][1] = 0;
-	}
-
-	/* Ensure the osd name is 0-terminated */
-	log_addrs->osd_name[sizeof(log_addrs->osd_name) - 1] = '\0';
-
-	/* Sanity checks */
-	if (log_addrs->num_log_addrs > adap->available_log_addrs) {
-		dprintk(1, "num_log_addrs > %d\n", adap->available_log_addrs);
-		return -EINVAL;
-	}
-
-	/*
-	 * Vendor ID is a 24 bit number, so check if the value is
-	 * within the correct range.
-	 */
-	if (log_addrs->vendor_id != CEC_VENDOR_ID_NONE &&
-	    (log_addrs->vendor_id & 0xff000000) != 0) {
-		dprintk(1, "invalid vendor ID\n");
-		return -EINVAL;
-	}
-
-	if (log_addrs->cec_version != CEC_OP_CEC_VERSION_1_4 &&
-	    log_addrs->cec_version != CEC_OP_CEC_VERSION_2_0) {
-		dprintk(1, "invalid CEC version\n");
-		return -EINVAL;
-	}
-
-	if (log_addrs->num_log_addrs > 1)
-		for (i = 0; i < log_addrs->num_log_addrs; i++)
-			if (log_addrs->log_addr_type[i] ==
-					CEC_LOG_ADDR_TYPE_UNREGISTERED) {
-				dprintk(1, "num_log_addrs > 1 can't be combined with unregistered LA\n");
-				return -EINVAL;
-			}
-
-	for (i = 0; i < log_addrs->num_log_addrs; i++) {
-		const u8 feature_sz = ARRAY_SIZE(log_addrs->features[0]);
-		u8 *features = log_addrs->features[i];
-		bool op_is_dev_features = false;
-		unsigned j;
-
-		log_addrs->log_addr[i] = CEC_LOG_ADDR_INVALID;
-		if (type_mask & (1 << log_addrs->log_addr_type[i])) {
-			dprintk(1, "duplicate logical address type\n");
-			return -EINVAL;
-		}
-		type_mask |= 1 << log_addrs->log_addr_type[i];
-		if ((type_mask & (1 << CEC_LOG_ADDR_TYPE_RECORD)) &&
-		    (type_mask & (1 << CEC_LOG_ADDR_TYPE_PLAYBACK))) {
-			/* Record already contains the playback functionality */
-			dprintk(1, "invalid record + playback combination\n");
-			return -EINVAL;
-		}
-		if (log_addrs->primary_device_type[i] >
-					CEC_OP_PRIM_DEVTYPE_PROCESSOR) {
-			dprintk(1, "unknown primary device type\n");
-			return -EINVAL;
-		}
-		if (log_addrs->primary_device_type[i] == 2) {
-			dprintk(1, "invalid primary device type\n");
-			return -EINVAL;
-		}
-		if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) {
-			dprintk(1, "unknown logical address type\n");
-			return -EINVAL;
-		}
-		for (j = 0; j < feature_sz; j++) {
-			if ((features[j] & 0x80) == 0) {
-				if (op_is_dev_features)
-					break;
-				op_is_dev_features = true;
-			}
-		}
-		if (!op_is_dev_features || j == feature_sz) {
-			dprintk(1, "malformed features\n");
-			return -EINVAL;
-		}
-		/* Zero unused part of the feature array */
-		memset(features + j + 1, 0, feature_sz - j - 1);
-	}
-
-	if (log_addrs->cec_version >= CEC_OP_CEC_VERSION_2_0) {
-		if (log_addrs->num_log_addrs > 2) {
-			dprintk(1, "CEC 2.0 allows no more than 2 logical addresses\n");
-			return -EINVAL;
-		}
-		if (log_addrs->num_log_addrs == 2) {
-			if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_AUDIOSYSTEM) |
-					   (1 << CEC_LOG_ADDR_TYPE_TV)))) {
-				dprintk(1, "two LAs is only allowed for audiosystem and TV\n");
-				return -EINVAL;
-			}
-			if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_PLAYBACK) |
-					   (1 << CEC_LOG_ADDR_TYPE_RECORD)))) {
-				dprintk(1, "an audiosystem/TV can only be combined with record or playback\n");
-				return -EINVAL;
-			}
-		}
-	}
-
-	/* Zero unused LAs */
-	for (i = log_addrs->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++) {
-		log_addrs->primary_device_type[i] = 0;
-		log_addrs->log_addr_type[i] = 0;
-		log_addrs->all_device_types[i] = 0;
-		memset(log_addrs->features[i], 0,
-		       sizeof(log_addrs->features[i]));
-	}
-
-	log_addrs->log_addr_mask = adap->log_addrs.log_addr_mask;
-	adap->log_addrs = *log_addrs;
-	if (adap->phys_addr != CEC_PHYS_ADDR_INVALID)
-		cec_claim_log_addrs(adap, block);
-	return 0;
-}
-
-int cec_s_log_addrs(struct cec_adapter *adap,
-		    struct cec_log_addrs *log_addrs, bool block)
-{
-	int err;
-
-	mutex_lock(&adap->lock);
-	err = __cec_s_log_addrs(adap, log_addrs, block);
-	mutex_unlock(&adap->lock);
-	return err;
-}
-EXPORT_SYMBOL_GPL(cec_s_log_addrs);
-
-/* High-level core CEC message handling */
-
-/* Fill in the Report Features message */
-static void cec_fill_msg_report_features(struct cec_adapter *adap,
-					 struct cec_msg *msg,
-					 unsigned int la_idx)
-{
-	const struct cec_log_addrs *las = &adap->log_addrs;
-	const u8 *features = las->features[la_idx];
-	bool op_is_dev_features = false;
-	unsigned int idx;
-
-	/* Report Features */
-	msg->msg[0] = (las->log_addr[la_idx] << 4) | 0x0f;
-	msg->len = 4;
-	msg->msg[1] = CEC_MSG_REPORT_FEATURES;
-	msg->msg[2] = adap->log_addrs.cec_version;
-	msg->msg[3] = las->all_device_types[la_idx];
-
-	/* Write RC Profiles first, then Device Features */
-	for (idx = 0; idx < ARRAY_SIZE(las->features[0]); idx++) {
-		msg->msg[msg->len++] = features[idx];
-		if ((features[idx] & CEC_OP_FEAT_EXT) == 0) {
-			if (op_is_dev_features)
-				break;
-			op_is_dev_features = true;
-		}
-	}
-}
-
-/* Transmit the Feature Abort message */
-static int cec_feature_abort_reason(struct cec_adapter *adap,
-				    struct cec_msg *msg, u8 reason)
-{
-	struct cec_msg tx_msg = { };
-
-	/*
-	 * Don't reply with CEC_MSG_FEATURE_ABORT to a CEC_MSG_FEATURE_ABORT
-	 * message!
-	 */
-	if (msg->msg[1] == CEC_MSG_FEATURE_ABORT)
-		return 0;
-	/* Don't Feature Abort messages from 'Unregistered' */
-	if (cec_msg_initiator(msg) == CEC_LOG_ADDR_UNREGISTERED)
-		return 0;
-	cec_msg_set_reply_to(&tx_msg, msg);
-	cec_msg_feature_abort(&tx_msg, msg->msg[1], reason);
-	return cec_transmit_msg(adap, &tx_msg, false);
-}
-
-static int cec_feature_abort(struct cec_adapter *adap, struct cec_msg *msg)
-{
-	return cec_feature_abort_reason(adap, msg,
-					CEC_OP_ABORT_UNRECOGNIZED_OP);
-}
-
-static int cec_feature_refused(struct cec_adapter *adap, struct cec_msg *msg)
-{
-	return cec_feature_abort_reason(adap, msg,
-					CEC_OP_ABORT_REFUSED);
-}
-
-/*
- * Called when a CEC message is received. This function will do any
- * necessary core processing. The is_reply bool is true if this message
- * is a reply to an earlier transmit.
- *
- * The message is either a broadcast message or a valid directed message.
- */
-static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
-			      bool is_reply)
-{
-	bool is_broadcast = cec_msg_is_broadcast(msg);
-	u8 dest_laddr = cec_msg_destination(msg);
-	u8 init_laddr = cec_msg_initiator(msg);
-	u8 devtype = cec_log_addr2dev(adap, dest_laddr);
-	int la_idx = cec_log_addr2idx(adap, dest_laddr);
-	bool from_unregistered = init_laddr == 0xf;
-	struct cec_msg tx_cec_msg = { };
-
-	dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
-
-	/* If this is a CDC-Only device, then ignore any non-CDC messages */
-	if (cec_is_cdc_only(&adap->log_addrs) &&
-	    msg->msg[1] != CEC_MSG_CDC_MESSAGE)
-		return 0;
-
-	if (adap->ops->received) {
-		/* Allow drivers to process the message first */
-		if (adap->ops->received(adap, msg) != -ENOMSG)
-			return 0;
-	}
-
-	/*
-	 * REPORT_PHYSICAL_ADDR, CEC_MSG_USER_CONTROL_PRESSED and
-	 * CEC_MSG_USER_CONTROL_RELEASED messages always have to be
-	 * handled by the CEC core, even if the passthrough mode is on.
-	 * The others are just ignored if passthrough mode is on.
-	 */
-	switch (msg->msg[1]) {
-	case CEC_MSG_GET_CEC_VERSION:
-	case CEC_MSG_ABORT:
-	case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
-	case CEC_MSG_GIVE_OSD_NAME:
-		/*
-		 * These messages reply with a directed message, so ignore if
-		 * the initiator is Unregistered.
-		 */
-		if (!adap->passthrough && from_unregistered)
-			return 0;
-		/* Fall through */
-	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
-	case CEC_MSG_GIVE_FEATURES:
-	case CEC_MSG_GIVE_PHYSICAL_ADDR:
-		/*
-		 * Skip processing these messages if the passthrough mode
-		 * is on.
-		 */
-		if (adap->passthrough)
-			goto skip_processing;
-		/* Ignore if addressing is wrong */
-		if (is_broadcast)
-			return 0;
-		break;
-
-	case CEC_MSG_USER_CONTROL_PRESSED:
-	case CEC_MSG_USER_CONTROL_RELEASED:
-		/* Wrong addressing mode: don't process */
-		if (is_broadcast || from_unregistered)
-			goto skip_processing;
-		break;
-
-	case CEC_MSG_REPORT_PHYSICAL_ADDR:
-		/*
-		 * This message is always processed, regardless of the
-		 * passthrough setting.
-		 *
-		 * Exception: don't process if wrong addressing mode.
-		 */
-		if (!is_broadcast)
-			goto skip_processing;
-		break;
-
-	default:
-		break;
-	}
-
-	cec_msg_set_reply_to(&tx_cec_msg, msg);
-
-	switch (msg->msg[1]) {
-	/* The following messages are processed but still passed through */
-	case CEC_MSG_REPORT_PHYSICAL_ADDR: {
-		u16 pa = (msg->msg[2] << 8) | msg->msg[3];
-
-		if (!from_unregistered)
-			adap->phys_addrs[init_laddr] = pa;
-		dprintk(1, "reported physical address %x.%x.%x.%x for logical address %d\n",
-			cec_phys_addr_exp(pa), init_laddr);
-		break;
-	}
-
-	case CEC_MSG_USER_CONTROL_PRESSED:
-		if (!(adap->capabilities & CEC_CAP_RC) ||
-		    !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU))
-			break;
-
-#ifdef CONFIG_MEDIA_CEC_RC
-		switch (msg->msg[2]) {
-		/*
-		 * Play function, this message can have variable length
-		 * depending on the specific play function that is used.
-		 */
-		case CEC_OP_UI_CMD_PLAY_FUNCTION:
-			if (msg->len == 2)
-				rc_keydown(adap->rc, RC_PROTO_CEC,
-					   msg->msg[2], 0);
-			else
-				rc_keydown(adap->rc, RC_PROTO_CEC,
-					   msg->msg[2] << 8 | msg->msg[3], 0);
-			break;
-		/*
-		 * Other function messages that are not handled.
-		 * Currently the RC framework does not allow to supply an
-		 * additional parameter to a keypress. These "keys" contain
-		 * other information such as channel number, an input number
-		 * etc.
-		 * For the time being these messages are not processed by the
-		 * framework and are simply forwarded to the user space.
-		 */
-		case CEC_OP_UI_CMD_SELECT_BROADCAST_TYPE:
-		case CEC_OP_UI_CMD_SELECT_SOUND_PRESENTATION:
-		case CEC_OP_UI_CMD_TUNE_FUNCTION:
-		case CEC_OP_UI_CMD_SELECT_MEDIA_FUNCTION:
-		case CEC_OP_UI_CMD_SELECT_AV_INPUT_FUNCTION:
-		case CEC_OP_UI_CMD_SELECT_AUDIO_INPUT_FUNCTION:
-			break;
-		default:
-			rc_keydown(adap->rc, RC_PROTO_CEC, msg->msg[2], 0);
-			break;
-		}
-#endif
-		break;
-
-	case CEC_MSG_USER_CONTROL_RELEASED:
-		if (!(adap->capabilities & CEC_CAP_RC) ||
-		    !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU))
-			break;
-#ifdef CONFIG_MEDIA_CEC_RC
-		rc_keyup(adap->rc);
-#endif
-		break;
-
-	/*
-	 * The remaining messages are only processed if the passthrough mode
-	 * is off.
-	 */
-	case CEC_MSG_GET_CEC_VERSION:
-		cec_msg_cec_version(&tx_cec_msg, adap->log_addrs.cec_version);
-		return cec_transmit_msg(adap, &tx_cec_msg, false);
-
-	case CEC_MSG_GIVE_PHYSICAL_ADDR:
-		/* Do nothing for CEC switches using addr 15 */
-		if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH && dest_laddr == 15)
-			return 0;
-		cec_msg_report_physical_addr(&tx_cec_msg, adap->phys_addr, devtype);
-		return cec_transmit_msg(adap, &tx_cec_msg, false);
-
-	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
-		if (adap->log_addrs.vendor_id == CEC_VENDOR_ID_NONE)
-			return cec_feature_abort(adap, msg);
-		cec_msg_device_vendor_id(&tx_cec_msg, adap->log_addrs.vendor_id);
-		return cec_transmit_msg(adap, &tx_cec_msg, false);
-
-	case CEC_MSG_ABORT:
-		/* Do nothing for CEC switches */
-		if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH)
-			return 0;
-		return cec_feature_refused(adap, msg);
-
-	case CEC_MSG_GIVE_OSD_NAME: {
-		if (adap->log_addrs.osd_name[0] == 0)
-			return cec_feature_abort(adap, msg);
-		cec_msg_set_osd_name(&tx_cec_msg, adap->log_addrs.osd_name);
-		return cec_transmit_msg(adap, &tx_cec_msg, false);
-	}
-
-	case CEC_MSG_GIVE_FEATURES:
-		if (adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0)
-			return cec_feature_abort(adap, msg);
-		cec_fill_msg_report_features(adap, &tx_cec_msg, la_idx);
-		return cec_transmit_msg(adap, &tx_cec_msg, false);
-
-	default:
-		/*
-		 * Unprocessed messages are aborted if userspace isn't doing
-		 * any processing either.
-		 */
-		if (!is_broadcast && !is_reply && !adap->follower_cnt &&
-		    !adap->cec_follower && msg->msg[1] != CEC_MSG_FEATURE_ABORT)
-			return cec_feature_abort(adap, msg);
-		break;
-	}
-
-skip_processing:
-	/* If this was a reply, then we're done, unless otherwise specified */
-	if (is_reply && !(msg->flags & CEC_MSG_FL_REPLY_TO_FOLLOWERS))
-		return 0;
-
-	/*
-	 * Send to the exclusive follower if there is one, otherwise send
-	 * to all followers.
-	 */
-	if (adap->cec_follower)
-		cec_queue_msg_fh(adap->cec_follower, msg);
-	else
-		cec_queue_msg_followers(adap, msg);
-	return 0;
-}
-
-/*
- * Helper functions to keep track of the 'monitor all' use count.
- *
- * These functions are called with adap->lock held.
- */
-int cec_monitor_all_cnt_inc(struct cec_adapter *adap)
-{
-	int ret = 0;
-
-	if (adap->monitor_all_cnt == 0)
-		ret = call_op(adap, adap_monitor_all_enable, 1);
-	if (ret == 0)
-		adap->monitor_all_cnt++;
-	return ret;
-}
-
-void cec_monitor_all_cnt_dec(struct cec_adapter *adap)
-{
-	adap->monitor_all_cnt--;
-	if (adap->monitor_all_cnt == 0)
-		WARN_ON(call_op(adap, adap_monitor_all_enable, 0));
-}
-
-/*
- * Helper functions to keep track of the 'monitor pin' use count.
- *
- * These functions are called with adap->lock held.
- */
-int cec_monitor_pin_cnt_inc(struct cec_adapter *adap)
-{
-	int ret = 0;
-
-	if (adap->monitor_pin_cnt == 0)
-		ret = call_op(adap, adap_monitor_pin_enable, 1);
-	if (ret == 0)
-		adap->monitor_pin_cnt++;
-	return ret;
-}
-
-void cec_monitor_pin_cnt_dec(struct cec_adapter *adap)
-{
-	adap->monitor_pin_cnt--;
-	if (adap->monitor_pin_cnt == 0)
-		WARN_ON(call_op(adap, adap_monitor_pin_enable, 0));
-}
-
-#ifdef CONFIG_DEBUG_FS
-/*
- * Log the current state of the CEC adapter.
- * Very useful for debugging.
- */
-int cec_adap_status(struct seq_file *file, void *priv)
-{
-	struct cec_adapter *adap = dev_get_drvdata(file->private);
-	struct cec_data *data;
-
-	mutex_lock(&adap->lock);
-	seq_printf(file, "configured: %d\n", adap->is_configured);
-	seq_printf(file, "configuring: %d\n", adap->is_configuring);
-	seq_printf(file, "phys_addr: %x.%x.%x.%x\n",
-		   cec_phys_addr_exp(adap->phys_addr));
-	seq_printf(file, "number of LAs: %d\n", adap->log_addrs.num_log_addrs);
-	seq_printf(file, "LA mask: 0x%04x\n", adap->log_addrs.log_addr_mask);
-	if (adap->cec_follower)
-		seq_printf(file, "has CEC follower%s\n",
-			   adap->passthrough ? " (in passthrough mode)" : "");
-	if (adap->cec_initiator)
-		seq_puts(file, "has CEC initiator\n");
-	if (adap->monitor_all_cnt)
-		seq_printf(file, "file handles in Monitor All mode: %u\n",
-			   adap->monitor_all_cnt);
-	if (adap->tx_timeouts) {
-		seq_printf(file, "transmit timeouts: %u\n",
-			   adap->tx_timeouts);
-		adap->tx_timeouts = 0;
-	}
-	data = adap->transmitting;
-	if (data)
-		seq_printf(file, "transmitting message: %*ph (reply: %02x, timeout: %ums)\n",
-			   data->msg.len, data->msg.msg, data->msg.reply,
-			   data->msg.timeout);
-	seq_printf(file, "pending transmits: %u\n", adap->transmit_queue_sz);
-	list_for_each_entry(data, &adap->transmit_queue, list) {
-		seq_printf(file, "queued tx message: %*ph (reply: %02x, timeout: %ums)\n",
-			   data->msg.len, data->msg.msg, data->msg.reply,
-			   data->msg.timeout);
-	}
-	list_for_each_entry(data, &adap->wait_queue, list) {
-		seq_printf(file, "message waiting for reply: %*ph (reply: %02x, timeout: %ums)\n",
-			   data->msg.len, data->msg.msg, data->msg.reply,
-			   data->msg.timeout);
-	}
-
-	call_void_op(adap, adap_status, file);
-	mutex_unlock(&adap->lock);
-	return 0;
-}
-#endif
diff --git a/drivers/media/cec/cec-api.c b/drivers/media/cec/cec-api.c
deleted file mode 100644
index 17d1cb2e5f97..000000000000
--- a/drivers/media/cec/cec-api.c
+++ /dev/null
@@ -1,701 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * cec-api.c - HDMI Consumer Electronics Control framework - API
- *
- * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/kmod.h>
-#include <linux/ktime.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/uaccess.h>
-#include <linux/version.h>
-
-#include <media/cec-pin.h>
-#include "cec-priv.h"
-#include "cec-pin-priv.h"
-
-static inline struct cec_devnode *cec_devnode_data(struct file *filp)
-{
-	struct cec_fh *fh = filp->private_data;
-
-	return &fh->adap->devnode;
-}
-
-/* CEC file operations */
-
-static __poll_t cec_poll(struct file *filp,
-			     struct poll_table_struct *poll)
-{
-	struct cec_fh *fh = filp->private_data;
-	struct cec_adapter *adap = fh->adap;
-	__poll_t res = 0;
-
-	poll_wait(filp, &fh->wait, poll);
-	if (!cec_is_registered(adap))
-		return EPOLLERR | EPOLLHUP;
-	mutex_lock(&adap->lock);
-	if (adap->is_configured &&
-	    adap->transmit_queue_sz < CEC_MAX_MSG_TX_QUEUE_SZ)
-		res |= EPOLLOUT | EPOLLWRNORM;
-	if (fh->queued_msgs)
-		res |= EPOLLIN | EPOLLRDNORM;
-	if (fh->total_queued_events)
-		res |= EPOLLPRI;
-	mutex_unlock(&adap->lock);
-	return res;
-}
-
-static bool cec_is_busy(const struct cec_adapter *adap,
-			const struct cec_fh *fh)
-{
-	bool valid_initiator = adap->cec_initiator && adap->cec_initiator == fh;
-	bool valid_follower = adap->cec_follower && adap->cec_follower == fh;
-
-	/*
-	 * Exclusive initiators and followers can always access the CEC adapter
-	 */
-	if (valid_initiator || valid_follower)
-		return false;
-	/*
-	 * All others can only access the CEC adapter if there is no
-	 * exclusive initiator and they are in INITIATOR mode.
-	 */
-	return adap->cec_initiator ||
-	       fh->mode_initiator == CEC_MODE_NO_INITIATOR;
-}
-
-static long cec_adap_g_caps(struct cec_adapter *adap,
-			    struct cec_caps __user *parg)
-{
-	struct cec_caps caps = {};
-
-	strscpy(caps.driver, adap->devnode.dev.parent->driver->name,
-		sizeof(caps.driver));
-	strscpy(caps.name, adap->name, sizeof(caps.name));
-	caps.available_log_addrs = adap->available_log_addrs;
-	caps.capabilities = adap->capabilities;
-	caps.version = LINUX_VERSION_CODE;
-	if (copy_to_user(parg, &caps, sizeof(caps)))
-		return -EFAULT;
-	return 0;
-}
-
-static long cec_adap_g_phys_addr(struct cec_adapter *adap,
-				 __u16 __user *parg)
-{
-	u16 phys_addr;
-
-	mutex_lock(&adap->lock);
-	phys_addr = adap->phys_addr;
-	mutex_unlock(&adap->lock);
-	if (copy_to_user(parg, &phys_addr, sizeof(phys_addr)))
-		return -EFAULT;
-	return 0;
-}
-
-static int cec_validate_phys_addr(u16 phys_addr)
-{
-	int i;
-
-	if (phys_addr == CEC_PHYS_ADDR_INVALID)
-		return 0;
-	for (i = 0; i < 16; i += 4)
-		if (phys_addr & (0xf << i))
-			break;
-	if (i == 16)
-		return 0;
-	for (i += 4; i < 16; i += 4)
-		if ((phys_addr & (0xf << i)) == 0)
-			return -EINVAL;
-	return 0;
-}
-
-static long cec_adap_s_phys_addr(struct cec_adapter *adap, struct cec_fh *fh,
-				 bool block, __u16 __user *parg)
-{
-	u16 phys_addr;
-	long err;
-
-	if (!(adap->capabilities & CEC_CAP_PHYS_ADDR))
-		return -ENOTTY;
-	if (copy_from_user(&phys_addr, parg, sizeof(phys_addr)))
-		return -EFAULT;
-
-	err = cec_validate_phys_addr(phys_addr);
-	if (err)
-		return err;
-	mutex_lock(&adap->lock);
-	if (cec_is_busy(adap, fh))
-		err = -EBUSY;
-	else
-		__cec_s_phys_addr(adap, phys_addr, block);
-	mutex_unlock(&adap->lock);
-	return err;
-}
-
-static long cec_adap_g_log_addrs(struct cec_adapter *adap,
-				 struct cec_log_addrs __user *parg)
-{
-	struct cec_log_addrs log_addrs;
-
-	mutex_lock(&adap->lock);
-	log_addrs = adap->log_addrs;
-	if (!adap->is_configured)
-		memset(log_addrs.log_addr, CEC_LOG_ADDR_INVALID,
-		       sizeof(log_addrs.log_addr));
-	mutex_unlock(&adap->lock);
-
-	if (copy_to_user(parg, &log_addrs, sizeof(log_addrs)))
-		return -EFAULT;
-	return 0;
-}
-
-static long cec_adap_s_log_addrs(struct cec_adapter *adap, struct cec_fh *fh,
-				 bool block, struct cec_log_addrs __user *parg)
-{
-	struct cec_log_addrs log_addrs;
-	long err = -EBUSY;
-
-	if (!(adap->capabilities & CEC_CAP_LOG_ADDRS))
-		return -ENOTTY;
-	if (copy_from_user(&log_addrs, parg, sizeof(log_addrs)))
-		return -EFAULT;
-	log_addrs.flags &= CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK |
-			   CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU |
-			   CEC_LOG_ADDRS_FL_CDC_ONLY;
-	mutex_lock(&adap->lock);
-	if (!adap->is_configuring &&
-	    (!log_addrs.num_log_addrs || !adap->is_configured) &&
-	    !cec_is_busy(adap, fh)) {
-		err = __cec_s_log_addrs(adap, &log_addrs, block);
-		if (!err)
-			log_addrs = adap->log_addrs;
-	}
-	mutex_unlock(&adap->lock);
-	if (err)
-		return err;
-	if (copy_to_user(parg, &log_addrs, sizeof(log_addrs)))
-		return -EFAULT;
-	return 0;
-}
-
-static long cec_adap_g_connector_info(struct cec_adapter *adap,
-				      struct cec_log_addrs __user *parg)
-{
-	int ret = 0;
-
-	if (!(adap->capabilities & CEC_CAP_CONNECTOR_INFO))
-		return -ENOTTY;
-
-	mutex_lock(&adap->lock);
-	if (copy_to_user(parg, &adap->conn_info, sizeof(adap->conn_info)))
-		ret = -EFAULT;
-	mutex_unlock(&adap->lock);
-	return ret;
-}
-
-static long cec_transmit(struct cec_adapter *adap, struct cec_fh *fh,
-			 bool block, struct cec_msg __user *parg)
-{
-	struct cec_msg msg = {};
-	long err = 0;
-
-	if (!(adap->capabilities & CEC_CAP_TRANSMIT))
-		return -ENOTTY;
-	if (copy_from_user(&msg, parg, sizeof(msg)))
-		return -EFAULT;
-
-	mutex_lock(&adap->lock);
-	if (adap->log_addrs.num_log_addrs == 0)
-		err = -EPERM;
-	else if (adap->is_configuring)
-		err = -ENONET;
-	else if (cec_is_busy(adap, fh))
-		err = -EBUSY;
-	else
-		err = cec_transmit_msg_fh(adap, &msg, fh, block);
-	mutex_unlock(&adap->lock);
-	if (err)
-		return err;
-	if (copy_to_user(parg, &msg, sizeof(msg)))
-		return -EFAULT;
-	return 0;
-}
-
-/* Called by CEC_RECEIVE: wait for a message to arrive */
-static int cec_receive_msg(struct cec_fh *fh, struct cec_msg *msg, bool block)
-{
-	u32 timeout = msg->timeout;
-	int res;
-
-	do {
-		mutex_lock(&fh->lock);
-		/* Are there received messages queued up? */
-		if (fh->queued_msgs) {
-			/* Yes, return the first one */
-			struct cec_msg_entry *entry =
-				list_first_entry(&fh->msgs,
-						 struct cec_msg_entry, list);
-
-			list_del(&entry->list);
-			*msg = entry->msg;
-			kfree(entry);
-			fh->queued_msgs--;
-			mutex_unlock(&fh->lock);
-			/* restore original timeout value */
-			msg->timeout = timeout;
-			return 0;
-		}
-
-		/* No, return EAGAIN in non-blocking mode or wait */
-		mutex_unlock(&fh->lock);
-
-		/* Return when in non-blocking mode */
-		if (!block)
-			return -EAGAIN;
-
-		if (msg->timeout) {
-			/* The user specified a timeout */
-			res = wait_event_interruptible_timeout(fh->wait,
-							       fh->queued_msgs,
-				msecs_to_jiffies(msg->timeout));
-			if (res == 0)
-				res = -ETIMEDOUT;
-			else if (res > 0)
-				res = 0;
-		} else {
-			/* Wait indefinitely */
-			res = wait_event_interruptible(fh->wait,
-						       fh->queued_msgs);
-		}
-		/* Exit on error, otherwise loop to get the new message */
-	} while (!res);
-	return res;
-}
-
-static long cec_receive(struct cec_adapter *adap, struct cec_fh *fh,
-			bool block, struct cec_msg __user *parg)
-{
-	struct cec_msg msg = {};
-	long err;
-
-	if (copy_from_user(&msg, parg, sizeof(msg)))
-		return -EFAULT;
-
-	err = cec_receive_msg(fh, &msg, block);
-	if (err)
-		return err;
-	msg.flags = 0;
-	if (copy_to_user(parg, &msg, sizeof(msg)))
-		return -EFAULT;
-	return 0;
-}
-
-static long cec_dqevent(struct cec_adapter *adap, struct cec_fh *fh,
-			bool block, struct cec_event __user *parg)
-{
-	struct cec_event_entry *ev = NULL;
-	u64 ts = ~0ULL;
-	unsigned int i;
-	unsigned int ev_idx;
-	long err = 0;
-
-	mutex_lock(&fh->lock);
-	while (!fh->total_queued_events && block) {
-		mutex_unlock(&fh->lock);
-		err = wait_event_interruptible(fh->wait,
-					       fh->total_queued_events);
-		if (err)
-			return err;
-		mutex_lock(&fh->lock);
-	}
-
-	/* Find the oldest event */
-	for (i = 0; i < CEC_NUM_EVENTS; i++) {
-		struct cec_event_entry *entry =
-			list_first_entry_or_null(&fh->events[i],
-						 struct cec_event_entry, list);
-
-		if (entry && entry->ev.ts <= ts) {
-			ev = entry;
-			ev_idx = i;
-			ts = ev->ev.ts;
-		}
-	}
-
-	if (!ev) {
-		err = -EAGAIN;
-		goto unlock;
-	}
-	list_del(&ev->list);
-
-	if (copy_to_user(parg, &ev->ev, sizeof(ev->ev)))
-		err = -EFAULT;
-	if (ev_idx >= CEC_NUM_CORE_EVENTS)
-		kfree(ev);
-	fh->queued_events[ev_idx]--;
-	fh->total_queued_events--;
-
-unlock:
-	mutex_unlock(&fh->lock);
-	return err;
-}
-
-static long cec_g_mode(struct cec_adapter *adap, struct cec_fh *fh,
-		       u32 __user *parg)
-{
-	u32 mode = fh->mode_initiator | fh->mode_follower;
-
-	if (copy_to_user(parg, &mode, sizeof(mode)))
-		return -EFAULT;
-	return 0;
-}
-
-static long cec_s_mode(struct cec_adapter *adap, struct cec_fh *fh,
-		       u32 __user *parg)
-{
-	u32 mode;
-	u8 mode_initiator;
-	u8 mode_follower;
-	bool send_pin_event = false;
-	long err = 0;
-
-	if (copy_from_user(&mode, parg, sizeof(mode)))
-		return -EFAULT;
-	if (mode & ~(CEC_MODE_INITIATOR_MSK | CEC_MODE_FOLLOWER_MSK)) {
-		dprintk(1, "%s: invalid mode bits set\n", __func__);
-		return -EINVAL;
-	}
-
-	mode_initiator = mode & CEC_MODE_INITIATOR_MSK;
-	mode_follower = mode & CEC_MODE_FOLLOWER_MSK;
-
-	if (mode_initiator > CEC_MODE_EXCL_INITIATOR ||
-	    mode_follower > CEC_MODE_MONITOR_ALL) {
-		dprintk(1, "%s: unknown mode\n", __func__);
-		return -EINVAL;
-	}
-
-	if (mode_follower == CEC_MODE_MONITOR_ALL &&
-	    !(adap->capabilities & CEC_CAP_MONITOR_ALL)) {
-		dprintk(1, "%s: MONITOR_ALL not supported\n", __func__);
-		return -EINVAL;
-	}
-
-	if (mode_follower == CEC_MODE_MONITOR_PIN &&
-	    !(adap->capabilities & CEC_CAP_MONITOR_PIN)) {
-		dprintk(1, "%s: MONITOR_PIN not supported\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Follower modes should always be able to send CEC messages */
-	if ((mode_initiator == CEC_MODE_NO_INITIATOR ||
-	     !(adap->capabilities & CEC_CAP_TRANSMIT)) &&
-	    mode_follower >= CEC_MODE_FOLLOWER &&
-	    mode_follower <= CEC_MODE_EXCL_FOLLOWER_PASSTHRU) {
-		dprintk(1, "%s: cannot transmit\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Monitor modes require CEC_MODE_NO_INITIATOR */
-	if (mode_initiator && mode_follower >= CEC_MODE_MONITOR_PIN) {
-		dprintk(1, "%s: monitor modes require NO_INITIATOR\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	/* Monitor modes require CAP_NET_ADMIN */
-	if (mode_follower >= CEC_MODE_MONITOR_PIN && !capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	mutex_lock(&adap->lock);
-	/*
-	 * You can't become exclusive follower if someone else already
-	 * has that job.
-	 */
-	if ((mode_follower == CEC_MODE_EXCL_FOLLOWER ||
-	     mode_follower == CEC_MODE_EXCL_FOLLOWER_PASSTHRU) &&
-	    adap->cec_follower && adap->cec_follower != fh)
-		err = -EBUSY;
-	/*
-	 * You can't become exclusive initiator if someone else already
-	 * has that job.
-	 */
-	if (mode_initiator == CEC_MODE_EXCL_INITIATOR &&
-	    adap->cec_initiator && adap->cec_initiator != fh)
-		err = -EBUSY;
-
-	if (!err) {
-		bool old_mon_all = fh->mode_follower == CEC_MODE_MONITOR_ALL;
-		bool new_mon_all = mode_follower == CEC_MODE_MONITOR_ALL;
-
-		if (old_mon_all != new_mon_all) {
-			if (new_mon_all)
-				err = cec_monitor_all_cnt_inc(adap);
-			else
-				cec_monitor_all_cnt_dec(adap);
-		}
-	}
-
-	if (!err) {
-		bool old_mon_pin = fh->mode_follower == CEC_MODE_MONITOR_PIN;
-		bool new_mon_pin = mode_follower == CEC_MODE_MONITOR_PIN;
-
-		if (old_mon_pin != new_mon_pin) {
-			send_pin_event = new_mon_pin;
-			if (new_mon_pin)
-				err = cec_monitor_pin_cnt_inc(adap);
-			else
-				cec_monitor_pin_cnt_dec(adap);
-		}
-	}
-
-	if (err) {
-		mutex_unlock(&adap->lock);
-		return err;
-	}
-
-	if (fh->mode_follower == CEC_MODE_FOLLOWER)
-		adap->follower_cnt--;
-	if (mode_follower == CEC_MODE_FOLLOWER)
-		adap->follower_cnt++;
-	if (send_pin_event) {
-		struct cec_event ev = {
-			.flags = CEC_EVENT_FL_INITIAL_STATE,
-		};
-
-		ev.event = adap->cec_pin_is_high ? CEC_EVENT_PIN_CEC_HIGH :
-						   CEC_EVENT_PIN_CEC_LOW;
-		cec_queue_event_fh(fh, &ev, 0);
-	}
-	if (mode_follower == CEC_MODE_EXCL_FOLLOWER ||
-	    mode_follower == CEC_MODE_EXCL_FOLLOWER_PASSTHRU) {
-		adap->passthrough =
-			mode_follower == CEC_MODE_EXCL_FOLLOWER_PASSTHRU;
-		adap->cec_follower = fh;
-	} else if (adap->cec_follower == fh) {
-		adap->passthrough = false;
-		adap->cec_follower = NULL;
-	}
-	if (mode_initiator == CEC_MODE_EXCL_INITIATOR)
-		adap->cec_initiator = fh;
-	else if (adap->cec_initiator == fh)
-		adap->cec_initiator = NULL;
-	fh->mode_initiator = mode_initiator;
-	fh->mode_follower = mode_follower;
-	mutex_unlock(&adap->lock);
-	return 0;
-}
-
-static long cec_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-	struct cec_fh *fh = filp->private_data;
-	struct cec_adapter *adap = fh->adap;
-	bool block = !(filp->f_flags & O_NONBLOCK);
-	void __user *parg = (void __user *)arg;
-
-	if (!cec_is_registered(adap))
-		return -ENODEV;
-
-	switch (cmd) {
-	case CEC_ADAP_G_CAPS:
-		return cec_adap_g_caps(adap, parg);
-
-	case CEC_ADAP_G_PHYS_ADDR:
-		return cec_adap_g_phys_addr(adap, parg);
-
-	case CEC_ADAP_S_PHYS_ADDR:
-		return cec_adap_s_phys_addr(adap, fh, block, parg);
-
-	case CEC_ADAP_G_LOG_ADDRS:
-		return cec_adap_g_log_addrs(adap, parg);
-
-	case CEC_ADAP_S_LOG_ADDRS:
-		return cec_adap_s_log_addrs(adap, fh, block, parg);
-
-	case CEC_ADAP_G_CONNECTOR_INFO:
-		return cec_adap_g_connector_info(adap, parg);
-
-	case CEC_TRANSMIT:
-		return cec_transmit(adap, fh, block, parg);
-
-	case CEC_RECEIVE:
-		return cec_receive(adap, fh, block, parg);
-
-	case CEC_DQEVENT:
-		return cec_dqevent(adap, fh, block, parg);
-
-	case CEC_G_MODE:
-		return cec_g_mode(adap, fh, parg);
-
-	case CEC_S_MODE:
-		return cec_s_mode(adap, fh, parg);
-
-	default:
-		return -ENOTTY;
-	}
-}
-
-static int cec_open(struct inode *inode, struct file *filp)
-{
-	struct cec_devnode *devnode =
-		container_of(inode->i_cdev, struct cec_devnode, cdev);
-	struct cec_adapter *adap = to_cec_adapter(devnode);
-	struct cec_fh *fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	/*
-	 * Initial events that are automatically sent when the cec device is
-	 * opened.
-	 */
-	struct cec_event ev = {
-		.event = CEC_EVENT_STATE_CHANGE,
-		.flags = CEC_EVENT_FL_INITIAL_STATE,
-	};
-	unsigned int i;
-	int err;
-
-	if (!fh)
-		return -ENOMEM;
-
-	INIT_LIST_HEAD(&fh->msgs);
-	INIT_LIST_HEAD(&fh->xfer_list);
-	for (i = 0; i < CEC_NUM_EVENTS; i++)
-		INIT_LIST_HEAD(&fh->events[i]);
-	mutex_init(&fh->lock);
-	init_waitqueue_head(&fh->wait);
-
-	fh->mode_initiator = CEC_MODE_INITIATOR;
-	fh->adap = adap;
-
-	err = cec_get_device(devnode);
-	if (err) {
-		kfree(fh);
-		return err;
-	}
-
-	mutex_lock(&devnode->lock);
-	if (list_empty(&devnode->fhs) &&
-	    !adap->needs_hpd &&
-	    adap->phys_addr == CEC_PHYS_ADDR_INVALID) {
-		err = adap->ops->adap_enable(adap, true);
-		if (err) {
-			mutex_unlock(&devnode->lock);
-			kfree(fh);
-			return err;
-		}
-	}
-	filp->private_data = fh;
-
-	/* Queue up initial state events */
-	ev.state_change.phys_addr = adap->phys_addr;
-	ev.state_change.log_addr_mask = adap->log_addrs.log_addr_mask;
-	ev.state_change.have_conn_info =
-		adap->conn_info.type != CEC_CONNECTOR_TYPE_NO_CONNECTOR;
-	cec_queue_event_fh(fh, &ev, 0);
-#ifdef CONFIG_CEC_PIN
-	if (adap->pin && adap->pin->ops->read_hpd) {
-		err = adap->pin->ops->read_hpd(adap);
-		if (err >= 0) {
-			ev.event = err ? CEC_EVENT_PIN_HPD_HIGH :
-					 CEC_EVENT_PIN_HPD_LOW;
-			cec_queue_event_fh(fh, &ev, 0);
-		}
-	}
-	if (adap->pin && adap->pin->ops->read_5v) {
-		err = adap->pin->ops->read_5v(adap);
-		if (err >= 0) {
-			ev.event = err ? CEC_EVENT_PIN_5V_HIGH :
-					 CEC_EVENT_PIN_5V_LOW;
-			cec_queue_event_fh(fh, &ev, 0);
-		}
-	}
-#endif
-
-	list_add(&fh->list, &devnode->fhs);
-	mutex_unlock(&devnode->lock);
-
-	return 0;
-}
-
-/* Override for the release function */
-static int cec_release(struct inode *inode, struct file *filp)
-{
-	struct cec_devnode *devnode = cec_devnode_data(filp);
-	struct cec_adapter *adap = to_cec_adapter(devnode);
-	struct cec_fh *fh = filp->private_data;
-	unsigned int i;
-
-	mutex_lock(&adap->lock);
-	if (adap->cec_initiator == fh)
-		adap->cec_initiator = NULL;
-	if (adap->cec_follower == fh) {
-		adap->cec_follower = NULL;
-		adap->passthrough = false;
-	}
-	if (fh->mode_follower == CEC_MODE_FOLLOWER)
-		adap->follower_cnt--;
-	if (fh->mode_follower == CEC_MODE_MONITOR_PIN)
-		cec_monitor_pin_cnt_dec(adap);
-	if (fh->mode_follower == CEC_MODE_MONITOR_ALL)
-		cec_monitor_all_cnt_dec(adap);
-	mutex_unlock(&adap->lock);
-
-	mutex_lock(&devnode->lock);
-	list_del(&fh->list);
-	if (cec_is_registered(adap) && list_empty(&devnode->fhs) &&
-	    !adap->needs_hpd && adap->phys_addr == CEC_PHYS_ADDR_INVALID) {
-		WARN_ON(adap->ops->adap_enable(adap, false));
-	}
-	mutex_unlock(&devnode->lock);
-
-	/* Unhook pending transmits from this filehandle. */
-	mutex_lock(&adap->lock);
-	while (!list_empty(&fh->xfer_list)) {
-		struct cec_data *data =
-			list_first_entry(&fh->xfer_list, struct cec_data, xfer_list);
-
-		data->blocking = false;
-		data->fh = NULL;
-		list_del(&data->xfer_list);
-	}
-	mutex_unlock(&adap->lock);
-	while (!list_empty(&fh->msgs)) {
-		struct cec_msg_entry *entry =
-			list_first_entry(&fh->msgs, struct cec_msg_entry, list);
-
-		list_del(&entry->list);
-		kfree(entry);
-	}
-	for (i = CEC_NUM_CORE_EVENTS; i < CEC_NUM_EVENTS; i++) {
-		while (!list_empty(&fh->events[i])) {
-			struct cec_event_entry *entry =
-				list_first_entry(&fh->events[i],
-						 struct cec_event_entry, list);
-
-			list_del(&entry->list);
-			kfree(entry);
-		}
-	}
-	kfree(fh);
-
-	cec_put_device(devnode);
-	filp->private_data = NULL;
-	return 0;
-}
-
-const struct file_operations cec_devnode_fops = {
-	.owner = THIS_MODULE,
-	.open = cec_open,
-	.unlocked_ioctl = cec_ioctl,
-	.compat_ioctl = cec_ioctl,
-	.release = cec_release,
-	.poll = cec_poll,
-	.llseek = no_llseek,
-};
diff --git a/drivers/media/cec/cec-core.c b/drivers/media/cec/cec-core.c
deleted file mode 100644
index 0c52e1bb3910..000000000000
--- a/drivers/media/cec/cec-core.c
+++ /dev/null
@@ -1,465 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * cec-core.c - HDMI Consumer Electronics Control framework - Core
- *
- * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/kmod.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include "cec-priv.h"
-
-#define CEC_NUM_DEVICES	256
-#define CEC_NAME	"cec"
-
-int cec_debug;
-module_param_named(debug, cec_debug, int, 0644);
-MODULE_PARM_DESC(debug, "debug level (0-2)");
-
-static bool debug_phys_addr;
-module_param(debug_phys_addr, bool, 0644);
-MODULE_PARM_DESC(debug_phys_addr, "add CEC_CAP_PHYS_ADDR if set");
-
-static dev_t cec_dev_t;
-
-/* Active devices */
-static DEFINE_MUTEX(cec_devnode_lock);
-static DECLARE_BITMAP(cec_devnode_nums, CEC_NUM_DEVICES);
-
-static struct dentry *top_cec_dir;
-
-/* dev to cec_devnode */
-#define to_cec_devnode(cd) container_of(cd, struct cec_devnode, dev)
-
-int cec_get_device(struct cec_devnode *devnode)
-{
-	/*
-	 * Check if the cec device is available. This needs to be done with
-	 * the devnode->lock held to prevent an open/unregister race:
-	 * without the lock, the device could be unregistered and freed between
-	 * the devnode->registered check and get_device() calls, leading to
-	 * a crash.
-	 */
-	mutex_lock(&devnode->lock);
-	/*
-	 * return ENXIO if the cec device has been removed
-	 * already or if it is not registered anymore.
-	 */
-	if (!devnode->registered) {
-		mutex_unlock(&devnode->lock);
-		return -ENXIO;
-	}
-	/* and increase the device refcount */
-	get_device(&devnode->dev);
-	mutex_unlock(&devnode->lock);
-	return 0;
-}
-
-void cec_put_device(struct cec_devnode *devnode)
-{
-	put_device(&devnode->dev);
-}
-
-/* Called when the last user of the cec device exits. */
-static void cec_devnode_release(struct device *cd)
-{
-	struct cec_devnode *devnode = to_cec_devnode(cd);
-
-	mutex_lock(&cec_devnode_lock);
-	/* Mark device node number as free */
-	clear_bit(devnode->minor, cec_devnode_nums);
-	mutex_unlock(&cec_devnode_lock);
-
-	cec_delete_adapter(to_cec_adapter(devnode));
-}
-
-static struct bus_type cec_bus_type = {
-	.name = CEC_NAME,
-};
-
-/*
- * Register a cec device node
- *
- * The registration code assigns minor numbers and registers the new device node
- * with the kernel. An error is returned if no free minor number can be found,
- * or if the registration of the device node fails.
- *
- * Zero is returned on success.
- *
- * Note that if the cec_devnode_register call fails, the release() callback of
- * the cec_devnode structure is *not* called, so the caller is responsible for
- * freeing any data.
- */
-static int __must_check cec_devnode_register(struct cec_devnode *devnode,
-					     struct module *owner)
-{
-	int minor;
-	int ret;
-
-	/* Part 1: Find a free minor number */
-	mutex_lock(&cec_devnode_lock);
-	minor = find_next_zero_bit(cec_devnode_nums, CEC_NUM_DEVICES, 0);
-	if (minor == CEC_NUM_DEVICES) {
-		mutex_unlock(&cec_devnode_lock);
-		pr_err("could not get a free minor\n");
-		return -ENFILE;
-	}
-
-	set_bit(minor, cec_devnode_nums);
-	mutex_unlock(&cec_devnode_lock);
-
-	devnode->minor = minor;
-	devnode->dev.bus = &cec_bus_type;
-	devnode->dev.devt = MKDEV(MAJOR(cec_dev_t), minor);
-	devnode->dev.release = cec_devnode_release;
-	dev_set_name(&devnode->dev, "cec%d", devnode->minor);
-	device_initialize(&devnode->dev);
-
-	/* Part 2: Initialize and register the character device */
-	cdev_init(&devnode->cdev, &cec_devnode_fops);
-	devnode->cdev.owner = owner;
-	kobject_set_name(&devnode->cdev.kobj, "cec%d", devnode->minor);
-
-	devnode->registered = true;
-	ret = cdev_device_add(&devnode->cdev, &devnode->dev);
-	if (ret) {
-		devnode->registered = false;
-		pr_err("%s: cdev_device_add failed\n", __func__);
-		goto clr_bit;
-	}
-
-	return 0;
-
-clr_bit:
-	mutex_lock(&cec_devnode_lock);
-	clear_bit(devnode->minor, cec_devnode_nums);
-	mutex_unlock(&cec_devnode_lock);
-	return ret;
-}
-
-/*
- * Unregister a cec device node
- *
- * This unregisters the passed device. Future open calls will be met with
- * errors.
- *
- * This function can safely be called if the device node has never been
- * registered or has already been unregistered.
- */
-static void cec_devnode_unregister(struct cec_adapter *adap)
-{
-	struct cec_devnode *devnode = &adap->devnode;
-	struct cec_fh *fh;
-
-	mutex_lock(&devnode->lock);
-
-	/* Check if devnode was never registered or already unregistered */
-	if (!devnode->registered || devnode->unregistered) {
-		mutex_unlock(&devnode->lock);
-		return;
-	}
-
-	list_for_each_entry(fh, &devnode->fhs, list)
-		wake_up_interruptible(&fh->wait);
-
-	devnode->registered = false;
-	devnode->unregistered = true;
-	mutex_unlock(&devnode->lock);
-
-	mutex_lock(&adap->lock);
-	__cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false);
-	__cec_s_log_addrs(adap, NULL, false);
-	mutex_unlock(&adap->lock);
-
-	cdev_device_del(&devnode->cdev, &devnode->dev);
-	put_device(&devnode->dev);
-}
-
-#ifdef CONFIG_DEBUG_FS
-static ssize_t cec_error_inj_write(struct file *file,
-	const char __user *ubuf, size_t count, loff_t *ppos)
-{
-	struct seq_file *sf = file->private_data;
-	struct cec_adapter *adap = sf->private;
-	char *buf;
-	char *line;
-	char *p;
-
-	buf = memdup_user_nul(ubuf, min_t(size_t, PAGE_SIZE, count));
-	if (IS_ERR(buf))
-		return PTR_ERR(buf);
-	p = buf;
-	while (p && *p) {
-		p = skip_spaces(p);
-		line = strsep(&p, "\n");
-		if (!*line || *line == '#')
-			continue;
-		if (!adap->ops->error_inj_parse_line(adap, line)) {
-			kfree(buf);
-			return -EINVAL;
-		}
-	}
-	kfree(buf);
-	return count;
-}
-
-static int cec_error_inj_show(struct seq_file *sf, void *unused)
-{
-	struct cec_adapter *adap = sf->private;
-
-	return adap->ops->error_inj_show(adap, sf);
-}
-
-static int cec_error_inj_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, cec_error_inj_show, inode->i_private);
-}
-
-static const struct file_operations cec_error_inj_fops = {
-	.open = cec_error_inj_open,
-	.write = cec_error_inj_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-#endif
-
-struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops,
-					 void *priv, const char *name, u32 caps,
-					 u8 available_las)
-{
-	struct cec_adapter *adap;
-	int res;
-
-#ifndef CONFIG_MEDIA_CEC_RC
-	caps &= ~CEC_CAP_RC;
-#endif
-
-	if (WARN_ON(!caps))
-		return ERR_PTR(-EINVAL);
-	if (WARN_ON(!ops))
-		return ERR_PTR(-EINVAL);
-	if (WARN_ON(!available_las || available_las > CEC_MAX_LOG_ADDRS))
-		return ERR_PTR(-EINVAL);
-	adap = kzalloc(sizeof(*adap), GFP_KERNEL);
-	if (!adap)
-		return ERR_PTR(-ENOMEM);
-	strscpy(adap->name, name, sizeof(adap->name));
-	adap->phys_addr = CEC_PHYS_ADDR_INVALID;
-	adap->cec_pin_is_high = true;
-	adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0;
-	adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE;
-	adap->capabilities = caps;
-	if (debug_phys_addr)
-		adap->capabilities |= CEC_CAP_PHYS_ADDR;
-	adap->needs_hpd = caps & CEC_CAP_NEEDS_HPD;
-	adap->available_log_addrs = available_las;
-	adap->sequence = 0;
-	adap->ops = ops;
-	adap->priv = priv;
-	memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs));
-	mutex_init(&adap->lock);
-	INIT_LIST_HEAD(&adap->transmit_queue);
-	INIT_LIST_HEAD(&adap->wait_queue);
-	init_waitqueue_head(&adap->kthread_waitq);
-
-	/* adap->devnode initialization */
-	INIT_LIST_HEAD(&adap->devnode.fhs);
-	mutex_init(&adap->devnode.lock);
-
-	adap->kthread = kthread_run(cec_thread_func, adap, "cec-%s", name);
-	if (IS_ERR(adap->kthread)) {
-		pr_err("cec-%s: kernel_thread() failed\n", name);
-		res = PTR_ERR(adap->kthread);
-		kfree(adap);
-		return ERR_PTR(res);
-	}
-
-#ifdef CONFIG_MEDIA_CEC_RC
-	if (!(caps & CEC_CAP_RC))
-		return adap;
-
-	/* Prepare the RC input device */
-	adap->rc = rc_allocate_device(RC_DRIVER_SCANCODE);
-	if (!adap->rc) {
-		pr_err("cec-%s: failed to allocate memory for rc_dev\n",
-		       name);
-		kthread_stop(adap->kthread);
-		kfree(adap);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	snprintf(adap->input_phys, sizeof(adap->input_phys),
-		 "%s/input0", adap->name);
-
-	adap->rc->device_name = adap->name;
-	adap->rc->input_phys = adap->input_phys;
-	adap->rc->input_id.bustype = BUS_CEC;
-	adap->rc->input_id.vendor = 0;
-	adap->rc->input_id.product = 0;
-	adap->rc->input_id.version = 1;
-	adap->rc->driver_name = CEC_NAME;
-	adap->rc->allowed_protocols = RC_PROTO_BIT_CEC;
-	adap->rc->priv = adap;
-	adap->rc->map_name = RC_MAP_CEC;
-	adap->rc->timeout = MS_TO_NS(550);
-#endif
-	return adap;
-}
-EXPORT_SYMBOL_GPL(cec_allocate_adapter);
-
-int cec_register_adapter(struct cec_adapter *adap,
-			 struct device *parent)
-{
-	int res;
-
-	if (IS_ERR_OR_NULL(adap))
-		return 0;
-
-	if (WARN_ON(!parent))
-		return -EINVAL;
-
-	adap->owner = parent->driver->owner;
-	adap->devnode.dev.parent = parent;
-
-#ifdef CONFIG_MEDIA_CEC_RC
-	if (adap->capabilities & CEC_CAP_RC) {
-		adap->rc->dev.parent = parent;
-		res = rc_register_device(adap->rc);
-
-		if (res) {
-			pr_err("cec-%s: failed to prepare input device\n",
-			       adap->name);
-			rc_free_device(adap->rc);
-			adap->rc = NULL;
-			return res;
-		}
-	}
-#endif
-
-	res = cec_devnode_register(&adap->devnode, adap->owner);
-	if (res) {
-#ifdef CONFIG_MEDIA_CEC_RC
-		/* Note: rc_unregister also calls rc_free */
-		rc_unregister_device(adap->rc);
-		adap->rc = NULL;
-#endif
-		return res;
-	}
-
-	dev_set_drvdata(&adap->devnode.dev, adap);
-#ifdef CONFIG_DEBUG_FS
-	if (!top_cec_dir)
-		return 0;
-
-	adap->cec_dir = debugfs_create_dir(dev_name(&adap->devnode.dev), top_cec_dir);
-	if (IS_ERR_OR_NULL(adap->cec_dir)) {
-		pr_warn("cec-%s: Failed to create debugfs dir\n", adap->name);
-		return 0;
-	}
-	adap->status_file = debugfs_create_devm_seqfile(&adap->devnode.dev,
-		"status", adap->cec_dir, cec_adap_status);
-	if (IS_ERR_OR_NULL(adap->status_file)) {
-		pr_warn("cec-%s: Failed to create status file\n", adap->name);
-		debugfs_remove_recursive(adap->cec_dir);
-		adap->cec_dir = NULL;
-		return 0;
-	}
-	if (!adap->ops->error_inj_show || !adap->ops->error_inj_parse_line)
-		return 0;
-	adap->error_inj_file = debugfs_create_file("error-inj", 0644,
-						   adap->cec_dir, adap,
-						   &cec_error_inj_fops);
-	if (IS_ERR_OR_NULL(adap->error_inj_file))
-		pr_warn("cec-%s: Failed to create error-inj file\n",
-			adap->name);
-#endif
-	return 0;
-}
-EXPORT_SYMBOL_GPL(cec_register_adapter);
-
-void cec_unregister_adapter(struct cec_adapter *adap)
-{
-	if (IS_ERR_OR_NULL(adap))
-		return;
-
-#ifdef CONFIG_MEDIA_CEC_RC
-	/* Note: rc_unregister also calls rc_free */
-	rc_unregister_device(adap->rc);
-	adap->rc = NULL;
-#endif
-	debugfs_remove_recursive(adap->cec_dir);
-#ifdef CONFIG_CEC_NOTIFIER
-	cec_notifier_cec_adap_unregister(adap->notifier, adap);
-#endif
-	cec_devnode_unregister(adap);
-}
-EXPORT_SYMBOL_GPL(cec_unregister_adapter);
-
-void cec_delete_adapter(struct cec_adapter *adap)
-{
-	if (IS_ERR_OR_NULL(adap))
-		return;
-	kthread_stop(adap->kthread);
-	if (adap->kthread_config)
-		kthread_stop(adap->kthread_config);
-	if (adap->ops->adap_free)
-		adap->ops->adap_free(adap);
-#ifdef CONFIG_MEDIA_CEC_RC
-	rc_free_device(adap->rc);
-#endif
-	kfree(adap);
-}
-EXPORT_SYMBOL_GPL(cec_delete_adapter);
-
-/*
- *	Initialise cec for linux
- */
-static int __init cec_devnode_init(void)
-{
-	int ret = alloc_chrdev_region(&cec_dev_t, 0, CEC_NUM_DEVICES, CEC_NAME);
-
-	if (ret < 0) {
-		pr_warn("cec: unable to allocate major\n");
-		return ret;
-	}
-
-#ifdef CONFIG_DEBUG_FS
-	top_cec_dir = debugfs_create_dir("cec", NULL);
-	if (IS_ERR_OR_NULL(top_cec_dir)) {
-		pr_warn("cec: Failed to create debugfs cec dir\n");
-		top_cec_dir = NULL;
-	}
-#endif
-
-	ret = bus_register(&cec_bus_type);
-	if (ret < 0) {
-		unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
-		pr_warn("cec: bus_register failed\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static void __exit cec_devnode_exit(void)
-{
-	debugfs_remove_recursive(top_cec_dir);
-	bus_unregister(&cec_bus_type);
-	unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
-}
-
-subsys_initcall(cec_devnode_init);
-module_exit(cec_devnode_exit)
-
-MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
-MODULE_DESCRIPTION("Device node registration for cec drivers");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/cec/cec-notifier.c b/drivers/media/cec/cec-notifier.c
deleted file mode 100644
index e748cd54b45d..000000000000
--- a/drivers/media/cec/cec-notifier.c
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * cec-notifier.c - notify CEC drivers of physical address changes
- *
- * Copyright 2016 Russell King <rmk+kernel@arm.linux.org.uk>
- * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/export.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/kref.h>
-#include <linux/of_platform.h>
-
-#include <media/cec.h>
-#include <media/cec-notifier.h>
-#include <drm/drm_edid.h>
-
-struct cec_notifier {
-	struct mutex lock;
-	struct list_head head;
-	struct kref kref;
-	struct device *hdmi_dev;
-	struct cec_connector_info conn_info;
-	const char *port_name;
-	struct cec_adapter *cec_adap;
-
-	u16 phys_addr;
-};
-
-static LIST_HEAD(cec_notifiers);
-static DEFINE_MUTEX(cec_notifiers_lock);
-
-/**
- * cec_notifier_get_conn - find or create a new cec_notifier for the given
- * device and connector tuple.
- * @hdmi_dev: device that sends the events.
- * @port_name: the connector name from which the event occurs
- *
- * If a notifier for device @dev already exists, then increase the refcount
- * and return that notifier.
- *
- * If it doesn't exist, then allocate a new notifier struct and return a
- * pointer to that new struct.
- *
- * Return NULL if the memory could not be allocated.
- */
-static struct cec_notifier *
-cec_notifier_get_conn(struct device *hdmi_dev, const char *port_name)
-{
-	struct cec_notifier *n;
-
-	mutex_lock(&cec_notifiers_lock);
-	list_for_each_entry(n, &cec_notifiers, head) {
-		if (n->hdmi_dev == hdmi_dev &&
-		    (!port_name ||
-		     (n->port_name && !strcmp(n->port_name, port_name)))) {
-			kref_get(&n->kref);
-			mutex_unlock(&cec_notifiers_lock);
-			return n;
-		}
-	}
-	n = kzalloc(sizeof(*n), GFP_KERNEL);
-	if (!n)
-		goto unlock;
-	n->hdmi_dev = hdmi_dev;
-	if (port_name) {
-		n->port_name = kstrdup(port_name, GFP_KERNEL);
-		if (!n->port_name) {
-			kfree(n);
-			n = NULL;
-			goto unlock;
-		}
-	}
-	n->phys_addr = CEC_PHYS_ADDR_INVALID;
-
-	mutex_init(&n->lock);
-	kref_init(&n->kref);
-	list_add_tail(&n->head, &cec_notifiers);
-unlock:
-	mutex_unlock(&cec_notifiers_lock);
-	return n;
-}
-
-static void cec_notifier_release(struct kref *kref)
-{
-	struct cec_notifier *n =
-		container_of(kref, struct cec_notifier, kref);
-
-	list_del(&n->head);
-	kfree(n->port_name);
-	kfree(n);
-}
-
-static void cec_notifier_put(struct cec_notifier *n)
-{
-	mutex_lock(&cec_notifiers_lock);
-	kref_put(&n->kref, cec_notifier_release);
-	mutex_unlock(&cec_notifiers_lock);
-}
-
-struct cec_notifier *
-cec_notifier_conn_register(struct device *hdmi_dev, const char *port_name,
-			   const struct cec_connector_info *conn_info)
-{
-	struct cec_notifier *n = cec_notifier_get_conn(hdmi_dev, port_name);
-
-	if (!n)
-		return n;
-
-	mutex_lock(&n->lock);
-	n->phys_addr = CEC_PHYS_ADDR_INVALID;
-	if (conn_info)
-		n->conn_info = *conn_info;
-	else
-		memset(&n->conn_info, 0, sizeof(n->conn_info));
-	if (n->cec_adap) {
-		cec_phys_addr_invalidate(n->cec_adap);
-		cec_s_conn_info(n->cec_adap, conn_info);
-	}
-	mutex_unlock(&n->lock);
-	return n;
-}
-EXPORT_SYMBOL_GPL(cec_notifier_conn_register);
-
-void cec_notifier_conn_unregister(struct cec_notifier *n)
-{
-	if (!n)
-		return;
-
-	mutex_lock(&n->lock);
-	memset(&n->conn_info, 0, sizeof(n->conn_info));
-	n->phys_addr = CEC_PHYS_ADDR_INVALID;
-	if (n->cec_adap) {
-		cec_phys_addr_invalidate(n->cec_adap);
-		cec_s_conn_info(n->cec_adap, NULL);
-	}
-	mutex_unlock(&n->lock);
-	cec_notifier_put(n);
-}
-EXPORT_SYMBOL_GPL(cec_notifier_conn_unregister);
-
-struct cec_notifier *
-cec_notifier_cec_adap_register(struct device *hdmi_dev, const char *port_name,
-			       struct cec_adapter *adap)
-{
-	struct cec_notifier *n;
-
-	if (WARN_ON(!adap))
-		return NULL;
-
-	n = cec_notifier_get_conn(hdmi_dev, port_name);
-	if (!n)
-		return n;
-
-	mutex_lock(&n->lock);
-	n->cec_adap = adap;
-	adap->conn_info = n->conn_info;
-	adap->notifier = n;
-	cec_s_phys_addr(adap, n->phys_addr, false);
-	mutex_unlock(&n->lock);
-	return n;
-}
-EXPORT_SYMBOL_GPL(cec_notifier_cec_adap_register);
-
-void cec_notifier_cec_adap_unregister(struct cec_notifier *n,
-				      struct cec_adapter *adap)
-{
-	if (!n)
-		return;
-
-	mutex_lock(&n->lock);
-	adap->notifier = NULL;
-	n->cec_adap = NULL;
-	mutex_unlock(&n->lock);
-	cec_notifier_put(n);
-}
-EXPORT_SYMBOL_GPL(cec_notifier_cec_adap_unregister);
-
-void cec_notifier_set_phys_addr(struct cec_notifier *n, u16 pa)
-{
-	if (n == NULL)
-		return;
-
-	mutex_lock(&n->lock);
-	n->phys_addr = pa;
-	if (n->cec_adap)
-		cec_s_phys_addr(n->cec_adap, n->phys_addr, false);
-	mutex_unlock(&n->lock);
-}
-EXPORT_SYMBOL_GPL(cec_notifier_set_phys_addr);
-
-void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n,
-					  const struct edid *edid)
-{
-	u16 pa = CEC_PHYS_ADDR_INVALID;
-
-	if (n == NULL)
-		return;
-
-	if (edid && edid->extensions)
-		pa = cec_get_edid_phys_addr((const u8 *)edid,
-				EDID_LENGTH * (edid->extensions + 1), NULL);
-	cec_notifier_set_phys_addr(n, pa);
-}
-EXPORT_SYMBOL_GPL(cec_notifier_set_phys_addr_from_edid);
-
-struct device *cec_notifier_parse_hdmi_phandle(struct device *dev)
-{
-	struct platform_device *hdmi_pdev;
-	struct device *hdmi_dev = NULL;
-	struct device_node *np;
-
-	np = of_parse_phandle(dev->of_node, "hdmi-phandle", 0);
-
-	if (!np) {
-		dev_err(dev, "Failed to find HDMI node in device tree\n");
-		return ERR_PTR(-ENODEV);
-	}
-	hdmi_pdev = of_find_device_by_node(np);
-	of_node_put(np);
-	if (hdmi_pdev) {
-		hdmi_dev = &hdmi_pdev->dev;
-		/*
-		 * Note that the device struct is only used as a key into the
-		 * cec_notifiers list, it is never actually accessed.
-		 * So we decrement the reference here so we don't leak
-		 * memory.
-		 */
-		put_device(hdmi_dev);
-		return hdmi_dev;
-	}
-	return ERR_PTR(-EPROBE_DEFER);
-}
-EXPORT_SYMBOL_GPL(cec_notifier_parse_hdmi_phandle);
diff --git a/drivers/media/cec/cec-pin-error-inj.c b/drivers/media/cec/cec-pin-error-inj.c
deleted file mode 100644
index c0088d3b8e3d..000000000000
--- a/drivers/media/cec/cec-pin-error-inj.c
+++ /dev/null
@@ -1,345 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/sched/types.h>
-
-#include <media/cec-pin.h>
-#include "cec-pin-priv.h"
-
-struct cec_error_inj_cmd {
-	unsigned int mode_offset;
-	int arg_idx;
-	const char *cmd;
-};
-
-static const struct cec_error_inj_cmd cec_error_inj_cmds[] = {
-	{ CEC_ERROR_INJ_RX_NACK_OFFSET, -1, "rx-nack" },
-	{ CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET,
-	  CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX, "rx-low-drive" },
-	{ CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET, -1, "rx-add-byte" },
-	{ CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET, -1, "rx-remove-byte" },
-	{ CEC_ERROR_INJ_RX_ARB_LOST_OFFSET,
-	  CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX, "rx-arb-lost" },
-
-	{ CEC_ERROR_INJ_TX_NO_EOM_OFFSET, -1, "tx-no-eom" },
-	{ CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET, -1, "tx-early-eom" },
-	{ CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET,
-	  CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX, "tx-add-bytes" },
-	{ CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET, -1, "tx-remove-byte" },
-	{ CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET,
-	  CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX, "tx-short-bit" },
-	{ CEC_ERROR_INJ_TX_LONG_BIT_OFFSET,
-	  CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX, "tx-long-bit" },
-	{ CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET,
-	  CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX, "tx-custom-bit" },
-	{ CEC_ERROR_INJ_TX_SHORT_START_OFFSET, -1, "tx-short-start" },
-	{ CEC_ERROR_INJ_TX_LONG_START_OFFSET, -1, "tx-long-start" },
-	{ CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET, -1, "tx-custom-start" },
-	{ CEC_ERROR_INJ_TX_LAST_BIT_OFFSET,
-	  CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX, "tx-last-bit" },
-	{ CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET,
-	  CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX, "tx-low-drive" },
-	{ 0, -1, NULL }
-};
-
-u16 cec_pin_rx_error_inj(struct cec_pin *pin)
-{
-	u16 cmd = CEC_ERROR_INJ_OP_ANY;
-
-	/* Only when 18 bits have been received do we have a valid cmd */
-	if (!(pin->error_inj[cmd] & CEC_ERROR_INJ_RX_MASK) &&
-	    pin->rx_bit >= 18)
-		cmd = pin->rx_msg.msg[1];
-	return (pin->error_inj[cmd] & CEC_ERROR_INJ_RX_MASK) ? cmd :
-		CEC_ERROR_INJ_OP_ANY;
-}
-
-u16 cec_pin_tx_error_inj(struct cec_pin *pin)
-{
-	u16 cmd = CEC_ERROR_INJ_OP_ANY;
-
-	if (!(pin->error_inj[cmd] & CEC_ERROR_INJ_TX_MASK) &&
-	    pin->tx_msg.len > 1)
-		cmd = pin->tx_msg.msg[1];
-	return (pin->error_inj[cmd] & CEC_ERROR_INJ_TX_MASK) ? cmd :
-		CEC_ERROR_INJ_OP_ANY;
-}
-
-bool cec_pin_error_inj_parse_line(struct cec_adapter *adap, char *line)
-{
-	static const char *delims = " \t\r";
-	struct cec_pin *pin = adap->pin;
-	unsigned int i;
-	bool has_pos = false;
-	char *p = line;
-	char *token;
-	char *comma;
-	u64 *error;
-	u8 *args;
-	bool has_op;
-	u8 op;
-	u8 mode;
-	u8 pos;
-
-	p = skip_spaces(p);
-	token = strsep(&p, delims);
-	if (!strcmp(token, "clear")) {
-		memset(pin->error_inj, 0, sizeof(pin->error_inj));
-		pin->rx_toggle = pin->tx_toggle = false;
-		pin->tx_ignore_nack_until_eom = false;
-		pin->tx_custom_pulse = false;
-		pin->tx_custom_low_usecs = CEC_TIM_CUSTOM_DEFAULT;
-		pin->tx_custom_high_usecs = CEC_TIM_CUSTOM_DEFAULT;
-		return true;
-	}
-	if (!strcmp(token, "rx-clear")) {
-		for (i = 0; i <= CEC_ERROR_INJ_OP_ANY; i++)
-			pin->error_inj[i] &= ~CEC_ERROR_INJ_RX_MASK;
-		pin->rx_toggle = false;
-		return true;
-	}
-	if (!strcmp(token, "tx-clear")) {
-		for (i = 0; i <= CEC_ERROR_INJ_OP_ANY; i++)
-			pin->error_inj[i] &= ~CEC_ERROR_INJ_TX_MASK;
-		pin->tx_toggle = false;
-		pin->tx_ignore_nack_until_eom = false;
-		pin->tx_custom_pulse = false;
-		pin->tx_custom_low_usecs = CEC_TIM_CUSTOM_DEFAULT;
-		pin->tx_custom_high_usecs = CEC_TIM_CUSTOM_DEFAULT;
-		return true;
-	}
-	if (!strcmp(token, "tx-ignore-nack-until-eom")) {
-		pin->tx_ignore_nack_until_eom = true;
-		return true;
-	}
-	if (!strcmp(token, "tx-custom-pulse")) {
-		pin->tx_custom_pulse = true;
-		cec_pin_start_timer(pin);
-		return true;
-	}
-	if (!p)
-		return false;
-
-	p = skip_spaces(p);
-	if (!strcmp(token, "tx-custom-low-usecs")) {
-		u32 usecs;
-
-		if (kstrtou32(p, 0, &usecs) || usecs > 10000000)
-			return false;
-		pin->tx_custom_low_usecs = usecs;
-		return true;
-	}
-	if (!strcmp(token, "tx-custom-high-usecs")) {
-		u32 usecs;
-
-		if (kstrtou32(p, 0, &usecs) || usecs > 10000000)
-			return false;
-		pin->tx_custom_high_usecs = usecs;
-		return true;
-	}
-
-	comma = strchr(token, ',');
-	if (comma)
-		*comma++ = '\0';
-	if (!strcmp(token, "any")) {
-		has_op = false;
-		error = pin->error_inj + CEC_ERROR_INJ_OP_ANY;
-		args = pin->error_inj_args[CEC_ERROR_INJ_OP_ANY];
-	} else if (!kstrtou8(token, 0, &op)) {
-		has_op = true;
-		error = pin->error_inj + op;
-		args = pin->error_inj_args[op];
-	} else {
-		return false;
-	}
-
-	mode = CEC_ERROR_INJ_MODE_ONCE;
-	if (comma) {
-		if (!strcmp(comma, "off"))
-			mode = CEC_ERROR_INJ_MODE_OFF;
-		else if (!strcmp(comma, "once"))
-			mode = CEC_ERROR_INJ_MODE_ONCE;
-		else if (!strcmp(comma, "always"))
-			mode = CEC_ERROR_INJ_MODE_ALWAYS;
-		else if (!strcmp(comma, "toggle"))
-			mode = CEC_ERROR_INJ_MODE_TOGGLE;
-		else
-			return false;
-	}
-
-	token = strsep(&p, delims);
-	if (p) {
-		p = skip_spaces(p);
-		has_pos = !kstrtou8(p, 0, &pos);
-	}
-
-	if (!strcmp(token, "clear")) {
-		*error = 0;
-		return true;
-	}
-	if (!strcmp(token, "rx-clear")) {
-		*error &= ~CEC_ERROR_INJ_RX_MASK;
-		return true;
-	}
-	if (!strcmp(token, "tx-clear")) {
-		*error &= ~CEC_ERROR_INJ_TX_MASK;
-		return true;
-	}
-
-	for (i = 0; cec_error_inj_cmds[i].cmd; i++) {
-		const char *cmd = cec_error_inj_cmds[i].cmd;
-		unsigned int mode_offset;
-		u64 mode_mask;
-		int arg_idx;
-		bool is_bit_pos = true;
-
-		if (strcmp(token, cmd))
-			continue;
-
-		mode_offset = cec_error_inj_cmds[i].mode_offset;
-		mode_mask = CEC_ERROR_INJ_MODE_MASK << mode_offset;
-		arg_idx = cec_error_inj_cmds[i].arg_idx;
-
-		if (mode_offset == CEC_ERROR_INJ_RX_ARB_LOST_OFFSET) {
-			if (has_op)
-				return false;
-			if (!has_pos)
-				pos = 0x0f;
-			is_bit_pos = false;
-		} else if (mode_offset == CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET) {
-			if (!has_pos || !pos)
-				return false;
-			is_bit_pos = false;
-		}
-
-		if (arg_idx >= 0 && is_bit_pos) {
-			if (!has_pos || pos >= 160)
-				return false;
-			if (has_op && pos < 10 + 8)
-				return false;
-			/* Invalid bit position may not be the Ack bit */
-			if ((mode_offset == CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET ||
-			     mode_offset == CEC_ERROR_INJ_TX_LONG_BIT_OFFSET ||
-			     mode_offset == CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET) &&
-			    (pos % 10) == 9)
-				return false;
-		}
-		*error &= ~mode_mask;
-		*error |= (u64)mode << mode_offset;
-		if (arg_idx >= 0)
-			args[arg_idx] = pos;
-		return true;
-	}
-	return false;
-}
-
-static void cec_pin_show_cmd(struct seq_file *sf, u32 cmd, u8 mode)
-{
-	if (cmd == CEC_ERROR_INJ_OP_ANY)
-		seq_puts(sf, "any,");
-	else
-		seq_printf(sf, "0x%02x,", cmd);
-	switch (mode) {
-	case CEC_ERROR_INJ_MODE_ONCE:
-		seq_puts(sf, "once ");
-		break;
-	case CEC_ERROR_INJ_MODE_ALWAYS:
-		seq_puts(sf, "always ");
-		break;
-	case CEC_ERROR_INJ_MODE_TOGGLE:
-		seq_puts(sf, "toggle ");
-		break;
-	default:
-		seq_puts(sf, "off ");
-		break;
-	}
-}
-
-int cec_pin_error_inj_show(struct cec_adapter *adap, struct seq_file *sf)
-{
-	struct cec_pin *pin = adap->pin;
-	unsigned int i, j;
-
-	seq_puts(sf, "# Clear error injections:\n");
-	seq_puts(sf, "#   clear          clear all rx and tx error injections\n");
-	seq_puts(sf, "#   rx-clear       clear all rx error injections\n");
-	seq_puts(sf, "#   tx-clear       clear all tx error injections\n");
-	seq_puts(sf, "#   <op> clear     clear all rx and tx error injections for <op>\n");
-	seq_puts(sf, "#   <op> rx-clear  clear all rx error injections for <op>\n");
-	seq_puts(sf, "#   <op> tx-clear  clear all tx error injections for <op>\n");
-	seq_puts(sf, "#\n");
-	seq_puts(sf, "# RX error injection:\n");
-	seq_puts(sf, "#   <op>[,<mode>] rx-nack              NACK the message instead of sending an ACK\n");
-	seq_puts(sf, "#   <op>[,<mode>] rx-low-drive <bit>   force a low-drive condition at this bit position\n");
-	seq_puts(sf, "#   <op>[,<mode>] rx-add-byte          add a spurious byte to the received CEC message\n");
-	seq_puts(sf, "#   <op>[,<mode>] rx-remove-byte       remove the last byte from the received CEC message\n");
-	seq_puts(sf, "#   <op>[,<mode>] rx-arb-lost <poll>   generate a POLL message to trigger an arbitration lost\n");
-	seq_puts(sf, "#\n");
-	seq_puts(sf, "# TX error injection settings:\n");
-	seq_puts(sf, "#   tx-ignore-nack-until-eom           ignore early NACKs until EOM\n");
-	seq_puts(sf, "#   tx-custom-low-usecs <usecs>        define the 'low' time for the custom pulse\n");
-	seq_puts(sf, "#   tx-custom-high-usecs <usecs>       define the 'high' time for the custom pulse\n");
-	seq_puts(sf, "#   tx-custom-pulse                    transmit the custom pulse once the bus is idle\n");
-	seq_puts(sf, "#\n");
-	seq_puts(sf, "# TX error injection:\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-no-eom            don't set the EOM bit\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-early-eom         set the EOM bit one byte too soon\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-add-bytes <num>   append <num> (1-255) spurious bytes to the message\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-remove-byte       drop the last byte from the message\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-short-bit <bit>   make this bit shorter than allowed\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-long-bit <bit>    make this bit longer than allowed\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-custom-bit <bit>  send the custom pulse instead of this bit\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-short-start       send a start pulse that's too short\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-long-start        send a start pulse that's too long\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-custom-start      send the custom pulse instead of the start pulse\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-last-bit <bit>    stop sending after this bit\n");
-	seq_puts(sf, "#   <op>[,<mode>] tx-low-drive <bit>   force a low-drive condition at this bit position\n");
-	seq_puts(sf, "#\n");
-	seq_puts(sf, "# <op>       CEC message opcode (0-255) or 'any'\n");
-	seq_puts(sf, "# <mode>     'once' (default), 'always', 'toggle' or 'off'\n");
-	seq_puts(sf, "# <bit>      CEC message bit (0-159)\n");
-	seq_puts(sf, "#            10 bits per 'byte': bits 0-7: data, bit 8: EOM, bit 9: ACK\n");
-	seq_puts(sf, "# <poll>     CEC poll message used to test arbitration lost (0x00-0xff, default 0x0f)\n");
-	seq_puts(sf, "# <usecs>    microseconds (0-10000000, default 1000)\n");
-
-	seq_puts(sf, "\nclear\n");
-
-	for (i = 0; i < ARRAY_SIZE(pin->error_inj); i++) {
-		u64 e = pin->error_inj[i];
-
-		for (j = 0; cec_error_inj_cmds[j].cmd; j++) {
-			const char *cmd = cec_error_inj_cmds[j].cmd;
-			unsigned int mode;
-			unsigned int mode_offset;
-			int arg_idx;
-
-			mode_offset = cec_error_inj_cmds[j].mode_offset;
-			arg_idx = cec_error_inj_cmds[j].arg_idx;
-			mode = (e >> mode_offset) & CEC_ERROR_INJ_MODE_MASK;
-			if (!mode)
-				continue;
-			cec_pin_show_cmd(sf, i, mode);
-			seq_puts(sf, cmd);
-			if (arg_idx >= 0)
-				seq_printf(sf, " %u",
-					   pin->error_inj_args[i][arg_idx]);
-			seq_puts(sf, "\n");
-		}
-	}
-
-	if (pin->tx_ignore_nack_until_eom)
-		seq_puts(sf, "tx-ignore-nack-until-eom\n");
-	if (pin->tx_custom_pulse)
-		seq_puts(sf, "tx-custom-pulse\n");
-	if (pin->tx_custom_low_usecs != CEC_TIM_CUSTOM_DEFAULT)
-		seq_printf(sf, "tx-custom-low-usecs %u\n",
-			   pin->tx_custom_low_usecs);
-	if (pin->tx_custom_high_usecs != CEC_TIM_CUSTOM_DEFAULT)
-		seq_printf(sf, "tx-custom-high-usecs %u\n",
-			   pin->tx_custom_high_usecs);
-	return 0;
-}
diff --git a/drivers/media/cec/cec-pin-priv.h b/drivers/media/cec/cec-pin-priv.h
deleted file mode 100644
index f423db8855d9..000000000000
--- a/drivers/media/cec/cec-pin-priv.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * cec-pin-priv.h - internal cec-pin header
- *
- * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef LINUX_CEC_PIN_PRIV_H
-#define LINUX_CEC_PIN_PRIV_H
-
-#include <linux/types.h>
-#include <linux/atomic.h>
-#include <media/cec-pin.h>
-
-enum cec_pin_state {
-	/* CEC is off */
-	CEC_ST_OFF,
-	/* CEC is idle, waiting for Rx or Tx */
-	CEC_ST_IDLE,
-
-	/* Tx states */
-
-	/* Pending Tx, waiting for Signal Free Time to expire */
-	CEC_ST_TX_WAIT,
-	/* Low-drive was detected, wait for bus to go high */
-	CEC_ST_TX_WAIT_FOR_HIGH,
-	/* Drive CEC low for the start bit */
-	CEC_ST_TX_START_BIT_LOW,
-	/* Drive CEC high for the start bit */
-	CEC_ST_TX_START_BIT_HIGH,
-	/* Generate a start bit period that is too short */
-	CEC_ST_TX_START_BIT_HIGH_SHORT,
-	/* Generate a start bit period that is too long */
-	CEC_ST_TX_START_BIT_HIGH_LONG,
-	/* Drive CEC low for the start bit using the custom timing */
-	CEC_ST_TX_START_BIT_LOW_CUSTOM,
-	/* Drive CEC high for the start bit using the custom timing */
-	CEC_ST_TX_START_BIT_HIGH_CUSTOM,
-	/* Drive CEC low for the 0 bit */
-	CEC_ST_TX_DATA_BIT_0_LOW,
-	/* Drive CEC high for the 0 bit */
-	CEC_ST_TX_DATA_BIT_0_HIGH,
-	/* Generate a bit period that is too short */
-	CEC_ST_TX_DATA_BIT_0_HIGH_SHORT,
-	/* Generate a bit period that is too long */
-	CEC_ST_TX_DATA_BIT_0_HIGH_LONG,
-	/* Drive CEC low for the 1 bit */
-	CEC_ST_TX_DATA_BIT_1_LOW,
-	/* Drive CEC high for the 1 bit */
-	CEC_ST_TX_DATA_BIT_1_HIGH,
-	/* Generate a bit period that is too short */
-	CEC_ST_TX_DATA_BIT_1_HIGH_SHORT,
-	/* Generate a bit period that is too long */
-	CEC_ST_TX_DATA_BIT_1_HIGH_LONG,
-	/*
-	 * Wait for start of sample time to check for Ack bit or first
-	 * four initiator bits to check for Arbitration Lost.
-	 */
-	CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE,
-	/* Wait for end of bit period after sampling */
-	CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE,
-	/* Generate a bit period that is too short */
-	CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT,
-	/* Generate a bit period that is too long */
-	CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG,
-	/* Drive CEC low for a data bit using the custom timing */
-	CEC_ST_TX_DATA_BIT_LOW_CUSTOM,
-	/* Drive CEC high for a data bit using the custom timing */
-	CEC_ST_TX_DATA_BIT_HIGH_CUSTOM,
-	/* Drive CEC low for a standalone pulse using the custom timing */
-	CEC_ST_TX_PULSE_LOW_CUSTOM,
-	/* Drive CEC high for a standalone pulse using the custom timing */
-	CEC_ST_TX_PULSE_HIGH_CUSTOM,
-	/* Start low drive */
-	CEC_ST_TX_LOW_DRIVE,
-
-	/* Rx states */
-
-	/* Start bit low detected */
-	CEC_ST_RX_START_BIT_LOW,
-	/* Start bit high detected */
-	CEC_ST_RX_START_BIT_HIGH,
-	/* Wait for bit sample time */
-	CEC_ST_RX_DATA_SAMPLE,
-	/* Wait for earliest end of bit period after sampling */
-	CEC_ST_RX_DATA_POST_SAMPLE,
-	/* Wait for CEC to go low (i.e. end of bit period) */
-	CEC_ST_RX_DATA_WAIT_FOR_LOW,
-	/* Drive CEC low to send 0 Ack bit */
-	CEC_ST_RX_ACK_LOW,
-	/* End of 0 Ack time, wait for earliest end of bit period */
-	CEC_ST_RX_ACK_LOW_POST,
-	/* Wait for CEC to go high (i.e. end of bit period */
-	CEC_ST_RX_ACK_HIGH_POST,
-	/* Wait for earliest end of bit period and end of message */
-	CEC_ST_RX_ACK_FINISH,
-	/* Start low drive */
-	CEC_ST_RX_LOW_DRIVE,
-
-	/* Monitor pin using interrupts */
-	CEC_ST_RX_IRQ,
-
-	/* Total number of pin states */
-	CEC_PIN_STATES
-};
-
-/* Error Injection */
-
-/* Error injection modes */
-#define CEC_ERROR_INJ_MODE_OFF				0
-#define CEC_ERROR_INJ_MODE_ONCE				1
-#define CEC_ERROR_INJ_MODE_ALWAYS			2
-#define CEC_ERROR_INJ_MODE_TOGGLE			3
-#define CEC_ERROR_INJ_MODE_MASK				3ULL
-
-/* Receive error injection options */
-#define CEC_ERROR_INJ_RX_NACK_OFFSET			0
-#define CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET		2
-#define CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET		4
-#define CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET		6
-#define CEC_ERROR_INJ_RX_ARB_LOST_OFFSET		8
-#define CEC_ERROR_INJ_RX_MASK				0xffffULL
-
-/* Transmit error injection options */
-#define CEC_ERROR_INJ_TX_NO_EOM_OFFSET			16
-#define CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET		18
-#define CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET		20
-#define CEC_ERROR_INJ_TX_LONG_BIT_OFFSET		22
-#define CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET		24
-#define CEC_ERROR_INJ_TX_SHORT_START_OFFSET		26
-#define CEC_ERROR_INJ_TX_LONG_START_OFFSET		28
-#define CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET		30
-#define CEC_ERROR_INJ_TX_LAST_BIT_OFFSET		32
-#define CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET		34
-#define CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET		36
-#define CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET		38
-#define CEC_ERROR_INJ_TX_MASK				0xffffffffffff0000ULL
-
-#define CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX		0
-#define CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX		1
-
-#define CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX		2
-#define CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX		3
-#define CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX		4
-#define CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX		5
-#define CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX		6
-#define CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX		7
-#define CEC_ERROR_INJ_NUM_ARGS				8
-
-/* Special CEC op values */
-#define CEC_ERROR_INJ_OP_ANY				0x00000100
-
-/* The default for the low/high time of the custom pulse */
-#define CEC_TIM_CUSTOM_DEFAULT				1000
-
-#define CEC_NUM_PIN_EVENTS				128
-#define CEC_PIN_EVENT_FL_IS_HIGH			(1 << 0)
-#define CEC_PIN_EVENT_FL_DROPPED			(1 << 1)
-
-#define CEC_PIN_IRQ_UNCHANGED	0
-#define CEC_PIN_IRQ_DISABLE	1
-#define CEC_PIN_IRQ_ENABLE	2
-
-struct cec_pin {
-	struct cec_adapter		*adap;
-	const struct cec_pin_ops	*ops;
-	struct task_struct		*kthread;
-	wait_queue_head_t		kthread_waitq;
-	struct hrtimer			timer;
-	ktime_t				ts;
-	unsigned int			wait_usecs;
-	u16				la_mask;
-	bool				enabled;
-	bool				monitor_all;
-	bool				rx_eom;
-	bool				enable_irq_failed;
-	enum cec_pin_state		state;
-	struct cec_msg			tx_msg;
-	u32				tx_bit;
-	bool				tx_nacked;
-	u32				tx_signal_free_time;
-	bool				tx_toggle;
-	struct cec_msg			rx_msg;
-	u32				rx_bit;
-	bool				rx_toggle;
-	u32				rx_start_bit_low_too_short_cnt;
-	u64				rx_start_bit_low_too_short_ts;
-	u32				rx_start_bit_low_too_short_delta;
-	u32				rx_start_bit_too_short_cnt;
-	u64				rx_start_bit_too_short_ts;
-	u32				rx_start_bit_too_short_delta;
-	u32				rx_start_bit_too_long_cnt;
-	u32				rx_data_bit_too_short_cnt;
-	u64				rx_data_bit_too_short_ts;
-	u32				rx_data_bit_too_short_delta;
-	u32				rx_data_bit_too_long_cnt;
-	u32				rx_low_drive_cnt;
-
-	struct cec_msg			work_rx_msg;
-	u8				work_tx_status;
-	ktime_t				work_tx_ts;
-	atomic_t			work_irq_change;
-	atomic_t			work_pin_num_events;
-	unsigned int			work_pin_events_wr;
-	unsigned int			work_pin_events_rd;
-	ktime_t				work_pin_ts[CEC_NUM_PIN_EVENTS];
-	u8				work_pin_events[CEC_NUM_PIN_EVENTS];
-	bool				work_pin_events_dropped;
-	u32				work_pin_events_dropped_cnt;
-	ktime_t				timer_ts;
-	u32				timer_cnt;
-	u32				timer_100ms_overruns;
-	u32				timer_300ms_overruns;
-	u32				timer_max_overrun;
-	u32				timer_sum_overrun;
-
-	u32				tx_custom_low_usecs;
-	u32				tx_custom_high_usecs;
-	bool				tx_ignore_nack_until_eom;
-	bool				tx_custom_pulse;
-	bool				tx_generated_poll;
-	bool				tx_post_eom;
-	u8				tx_extra_bytes;
-	u32				tx_low_drive_cnt;
-#ifdef CONFIG_CEC_PIN_ERROR_INJ
-	u64				error_inj[CEC_ERROR_INJ_OP_ANY + 1];
-	u8				error_inj_args[CEC_ERROR_INJ_OP_ANY + 1][CEC_ERROR_INJ_NUM_ARGS];
-#endif
-};
-
-void cec_pin_start_timer(struct cec_pin *pin);
-
-#ifdef CONFIG_CEC_PIN_ERROR_INJ
-bool cec_pin_error_inj_parse_line(struct cec_adapter *adap, char *line);
-int cec_pin_error_inj_show(struct cec_adapter *adap, struct seq_file *sf);
-
-u16 cec_pin_rx_error_inj(struct cec_pin *pin);
-u16 cec_pin_tx_error_inj(struct cec_pin *pin);
-#endif
-
-#endif
diff --git a/drivers/media/cec/cec-pin.c b/drivers/media/cec/cec-pin.c
deleted file mode 100644
index 660fe111f540..000000000000
--- a/drivers/media/cec/cec-pin.c
+++ /dev/null
@@ -1,1345 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/sched/types.h>
-
-#include <media/cec-pin.h>
-#include "cec-pin-priv.h"
-
-/* All timings are in microseconds */
-
-/* start bit timings */
-#define CEC_TIM_START_BIT_LOW		3700
-#define CEC_TIM_START_BIT_LOW_MIN	3500
-#define CEC_TIM_START_BIT_LOW_MAX	3900
-#define CEC_TIM_START_BIT_TOTAL		4500
-#define CEC_TIM_START_BIT_TOTAL_MIN	4300
-#define CEC_TIM_START_BIT_TOTAL_MAX	4700
-
-/* data bit timings */
-#define CEC_TIM_DATA_BIT_0_LOW		1500
-#define CEC_TIM_DATA_BIT_0_LOW_MIN	1300
-#define CEC_TIM_DATA_BIT_0_LOW_MAX	1700
-#define CEC_TIM_DATA_BIT_1_LOW		600
-#define CEC_TIM_DATA_BIT_1_LOW_MIN	400
-#define CEC_TIM_DATA_BIT_1_LOW_MAX	800
-#define CEC_TIM_DATA_BIT_TOTAL		2400
-#define CEC_TIM_DATA_BIT_TOTAL_MIN	2050
-#define CEC_TIM_DATA_BIT_TOTAL_MAX	2750
-/* earliest safe time to sample the bit state */
-#define CEC_TIM_DATA_BIT_SAMPLE		850
-/* earliest time the bit is back to 1 (T7 + 50) */
-#define CEC_TIM_DATA_BIT_HIGH		1750
-
-/* when idle, sample once per millisecond */
-#define CEC_TIM_IDLE_SAMPLE		1000
-/* when processing the start bit, sample twice per millisecond */
-#define CEC_TIM_START_BIT_SAMPLE	500
-/* when polling for a state change, sample once every 50 microseconds */
-#define CEC_TIM_SAMPLE			50
-
-#define CEC_TIM_LOW_DRIVE_ERROR		(1.5 * CEC_TIM_DATA_BIT_TOTAL)
-
-/*
- * Total data bit time that is too short/long for a valid bit,
- * used for error injection.
- */
-#define CEC_TIM_DATA_BIT_TOTAL_SHORT	1800
-#define CEC_TIM_DATA_BIT_TOTAL_LONG	2900
-
-/*
- * Total start bit time that is too short/long for a valid bit,
- * used for error injection.
- */
-#define CEC_TIM_START_BIT_TOTAL_SHORT	4100
-#define CEC_TIM_START_BIT_TOTAL_LONG	5000
-
-/* Data bits are 0-7, EOM is bit 8 and ACK is bit 9 */
-#define EOM_BIT				8
-#define ACK_BIT				9
-
-struct cec_state {
-	const char * const name;
-	unsigned int usecs;
-};
-
-static const struct cec_state states[CEC_PIN_STATES] = {
-	{ "Off",		   0 },
-	{ "Idle",		   CEC_TIM_IDLE_SAMPLE },
-	{ "Tx Wait",		   CEC_TIM_SAMPLE },
-	{ "Tx Wait for High",	   CEC_TIM_IDLE_SAMPLE },
-	{ "Tx Start Bit Low",	   CEC_TIM_START_BIT_LOW },
-	{ "Tx Start Bit High",	   CEC_TIM_START_BIT_TOTAL - CEC_TIM_START_BIT_LOW },
-	{ "Tx Start Bit High Short", CEC_TIM_START_BIT_TOTAL_SHORT - CEC_TIM_START_BIT_LOW },
-	{ "Tx Start Bit High Long", CEC_TIM_START_BIT_TOTAL_LONG - CEC_TIM_START_BIT_LOW },
-	{ "Tx Start Bit Low Custom", 0 },
-	{ "Tx Start Bit High Custom", 0 },
-	{ "Tx Data 0 Low",	   CEC_TIM_DATA_BIT_0_LOW },
-	{ "Tx Data 0 High",	   CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_0_LOW },
-	{ "Tx Data 0 High Short",  CEC_TIM_DATA_BIT_TOTAL_SHORT - CEC_TIM_DATA_BIT_0_LOW },
-	{ "Tx Data 0 High Long",   CEC_TIM_DATA_BIT_TOTAL_LONG - CEC_TIM_DATA_BIT_0_LOW },
-	{ "Tx Data 1 Low",	   CEC_TIM_DATA_BIT_1_LOW },
-	{ "Tx Data 1 High",	   CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_1_LOW },
-	{ "Tx Data 1 High Short",  CEC_TIM_DATA_BIT_TOTAL_SHORT - CEC_TIM_DATA_BIT_1_LOW },
-	{ "Tx Data 1 High Long",   CEC_TIM_DATA_BIT_TOTAL_LONG - CEC_TIM_DATA_BIT_1_LOW },
-	{ "Tx Data 1 High Pre Sample", CEC_TIM_DATA_BIT_SAMPLE - CEC_TIM_DATA_BIT_1_LOW },
-	{ "Tx Data 1 High Post Sample", CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_SAMPLE },
-	{ "Tx Data 1 High Post Sample Short", CEC_TIM_DATA_BIT_TOTAL_SHORT - CEC_TIM_DATA_BIT_SAMPLE },
-	{ "Tx Data 1 High Post Sample Long", CEC_TIM_DATA_BIT_TOTAL_LONG - CEC_TIM_DATA_BIT_SAMPLE },
-	{ "Tx Data Bit Low Custom", 0 },
-	{ "Tx Data Bit High Custom", 0 },
-	{ "Tx Pulse Low Custom",   0 },
-	{ "Tx Pulse High Custom",  0 },
-	{ "Tx Low Drive",	   CEC_TIM_LOW_DRIVE_ERROR },
-	{ "Rx Start Bit Low",	   CEC_TIM_SAMPLE },
-	{ "Rx Start Bit High",	   CEC_TIM_SAMPLE },
-	{ "Rx Data Sample",	   CEC_TIM_DATA_BIT_SAMPLE },
-	{ "Rx Data Post Sample",   CEC_TIM_DATA_BIT_HIGH - CEC_TIM_DATA_BIT_SAMPLE },
-	{ "Rx Data Wait for Low",  CEC_TIM_SAMPLE },
-	{ "Rx Ack Low",		   CEC_TIM_DATA_BIT_0_LOW },
-	{ "Rx Ack Low Post",	   CEC_TIM_DATA_BIT_HIGH - CEC_TIM_DATA_BIT_0_LOW },
-	{ "Rx Ack High Post",	   CEC_TIM_DATA_BIT_HIGH },
-	{ "Rx Ack Finish",	   CEC_TIM_DATA_BIT_TOTAL_MIN - CEC_TIM_DATA_BIT_HIGH },
-	{ "Rx Low Drive",	   CEC_TIM_LOW_DRIVE_ERROR },
-	{ "Rx Irq",		   0 },
-};
-
-static void cec_pin_update(struct cec_pin *pin, bool v, bool force)
-{
-	if (!force && v == pin->adap->cec_pin_is_high)
-		return;
-
-	pin->adap->cec_pin_is_high = v;
-	if (atomic_read(&pin->work_pin_num_events) < CEC_NUM_PIN_EVENTS) {
-		u8 ev = v;
-
-		if (pin->work_pin_events_dropped) {
-			pin->work_pin_events_dropped = false;
-			ev |= CEC_PIN_EVENT_FL_DROPPED;
-		}
-		pin->work_pin_events[pin->work_pin_events_wr] = ev;
-		pin->work_pin_ts[pin->work_pin_events_wr] = ktime_get();
-		pin->work_pin_events_wr =
-			(pin->work_pin_events_wr + 1) % CEC_NUM_PIN_EVENTS;
-		atomic_inc(&pin->work_pin_num_events);
-	} else {
-		pin->work_pin_events_dropped = true;
-		pin->work_pin_events_dropped_cnt++;
-	}
-	wake_up_interruptible(&pin->kthread_waitq);
-}
-
-static bool cec_pin_read(struct cec_pin *pin)
-{
-	bool v = pin->ops->read(pin->adap);
-
-	cec_pin_update(pin, v, false);
-	return v;
-}
-
-static void cec_pin_low(struct cec_pin *pin)
-{
-	pin->ops->low(pin->adap);
-	cec_pin_update(pin, false, false);
-}
-
-static bool cec_pin_high(struct cec_pin *pin)
-{
-	pin->ops->high(pin->adap);
-	return cec_pin_read(pin);
-}
-
-static bool rx_error_inj(struct cec_pin *pin, unsigned int mode_offset,
-			 int arg_idx, u8 *arg)
-{
-#ifdef CONFIG_CEC_PIN_ERROR_INJ
-	u16 cmd = cec_pin_rx_error_inj(pin);
-	u64 e = pin->error_inj[cmd];
-	unsigned int mode = (e >> mode_offset) & CEC_ERROR_INJ_MODE_MASK;
-
-	if (arg_idx >= 0) {
-		u8 pos = pin->error_inj_args[cmd][arg_idx];
-
-		if (arg)
-			*arg = pos;
-		else if (pos != pin->rx_bit)
-			return false;
-	}
-
-	switch (mode) {
-	case CEC_ERROR_INJ_MODE_ONCE:
-		pin->error_inj[cmd] &=
-			~(CEC_ERROR_INJ_MODE_MASK << mode_offset);
-		return true;
-	case CEC_ERROR_INJ_MODE_ALWAYS:
-		return true;
-	case CEC_ERROR_INJ_MODE_TOGGLE:
-		return pin->rx_toggle;
-	default:
-		return false;
-	}
-#else
-	return false;
-#endif
-}
-
-static bool rx_nack(struct cec_pin *pin)
-{
-	return rx_error_inj(pin, CEC_ERROR_INJ_RX_NACK_OFFSET, -1, NULL);
-}
-
-static bool rx_low_drive(struct cec_pin *pin)
-{
-	return rx_error_inj(pin, CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET,
-			    CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX, NULL);
-}
-
-static bool rx_add_byte(struct cec_pin *pin)
-{
-	return rx_error_inj(pin, CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET, -1, NULL);
-}
-
-static bool rx_remove_byte(struct cec_pin *pin)
-{
-	return rx_error_inj(pin, CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET, -1, NULL);
-}
-
-static bool rx_arb_lost(struct cec_pin *pin, u8 *poll)
-{
-	return pin->tx_msg.len == 0 &&
-		rx_error_inj(pin, CEC_ERROR_INJ_RX_ARB_LOST_OFFSET,
-			     CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX, poll);
-}
-
-static bool tx_error_inj(struct cec_pin *pin, unsigned int mode_offset,
-			 int arg_idx, u8 *arg)
-{
-#ifdef CONFIG_CEC_PIN_ERROR_INJ
-	u16 cmd = cec_pin_tx_error_inj(pin);
-	u64 e = pin->error_inj[cmd];
-	unsigned int mode = (e >> mode_offset) & CEC_ERROR_INJ_MODE_MASK;
-
-	if (arg_idx >= 0) {
-		u8 pos = pin->error_inj_args[cmd][arg_idx];
-
-		if (arg)
-			*arg = pos;
-		else if (pos != pin->tx_bit)
-			return false;
-	}
-
-	switch (mode) {
-	case CEC_ERROR_INJ_MODE_ONCE:
-		pin->error_inj[cmd] &=
-			~(CEC_ERROR_INJ_MODE_MASK << mode_offset);
-		return true;
-	case CEC_ERROR_INJ_MODE_ALWAYS:
-		return true;
-	case CEC_ERROR_INJ_MODE_TOGGLE:
-		return pin->tx_toggle;
-	default:
-		return false;
-	}
-#else
-	return false;
-#endif
-}
-
-static bool tx_no_eom(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_NO_EOM_OFFSET, -1, NULL);
-}
-
-static bool tx_early_eom(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET, -1, NULL);
-}
-
-static bool tx_short_bit(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET,
-			    CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX, NULL);
-}
-
-static bool tx_long_bit(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_LONG_BIT_OFFSET,
-			    CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX, NULL);
-}
-
-static bool tx_custom_bit(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET,
-			    CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX, NULL);
-}
-
-static bool tx_short_start(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_SHORT_START_OFFSET, -1, NULL);
-}
-
-static bool tx_long_start(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_LONG_START_OFFSET, -1, NULL);
-}
-
-static bool tx_custom_start(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET,
-			    -1, NULL);
-}
-
-static bool tx_last_bit(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_LAST_BIT_OFFSET,
-			    CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX, NULL);
-}
-
-static u8 tx_add_bytes(struct cec_pin *pin)
-{
-	u8 bytes;
-
-	if (tx_error_inj(pin, CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET,
-			 CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX, &bytes))
-		return bytes;
-	return 0;
-}
-
-static bool tx_remove_byte(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET, -1, NULL);
-}
-
-static bool tx_low_drive(struct cec_pin *pin)
-{
-	return tx_error_inj(pin, CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET,
-			    CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX, NULL);
-}
-
-static void cec_pin_to_idle(struct cec_pin *pin)
-{
-	/*
-	 * Reset all status fields, release the bus and
-	 * go to idle state.
-	 */
-	pin->rx_bit = pin->tx_bit = 0;
-	pin->rx_msg.len = 0;
-	memset(pin->rx_msg.msg, 0, sizeof(pin->rx_msg.msg));
-	pin->ts = ns_to_ktime(0);
-	pin->tx_generated_poll = false;
-	pin->tx_post_eom = false;
-	if (pin->state >= CEC_ST_TX_WAIT &&
-	    pin->state <= CEC_ST_TX_LOW_DRIVE)
-		pin->tx_toggle ^= 1;
-	if (pin->state >= CEC_ST_RX_START_BIT_LOW &&
-	    pin->state <= CEC_ST_RX_LOW_DRIVE)
-		pin->rx_toggle ^= 1;
-	pin->state = CEC_ST_IDLE;
-}
-
-/*
- * Handle Transmit-related states
- *
- * Basic state changes when transmitting:
- *
- * Idle -> Tx Wait (waiting for the end of signal free time) ->
- *	Tx Start Bit Low -> Tx Start Bit High ->
- *
- *   Regular data bits + EOM:
- *	Tx Data 0 Low -> Tx Data 0 High ->
- *   or:
- *	Tx Data 1 Low -> Tx Data 1 High ->
- *
- *   First 4 data bits or Ack bit:
- *	Tx Data 0 Low -> Tx Data 0 High ->
- *   or:
- *	Tx Data 1 Low -> Tx Data 1 High -> Tx Data 1 Pre Sample ->
- *		Tx Data 1 Post Sample ->
- *
- *   After the last Ack go to Idle.
- *
- * If it detects a Low Drive condition then:
- *	Tx Wait For High -> Idle
- *
- * If it loses arbitration, then it switches to state Rx Data Post Sample.
- */
-static void cec_pin_tx_states(struct cec_pin *pin, ktime_t ts)
-{
-	bool v;
-	bool is_ack_bit, ack;
-
-	switch (pin->state) {
-	case CEC_ST_TX_WAIT_FOR_HIGH:
-		if (cec_pin_read(pin))
-			cec_pin_to_idle(pin);
-		break;
-
-	case CEC_ST_TX_START_BIT_LOW:
-		if (tx_short_start(pin)) {
-			/*
-			 * Error Injection: send an invalid (too short)
-			 * start pulse.
-			 */
-			pin->state = CEC_ST_TX_START_BIT_HIGH_SHORT;
-		} else if (tx_long_start(pin)) {
-			/*
-			 * Error Injection: send an invalid (too long)
-			 * start pulse.
-			 */
-			pin->state = CEC_ST_TX_START_BIT_HIGH_LONG;
-		} else {
-			pin->state = CEC_ST_TX_START_BIT_HIGH;
-		}
-		/* Generate start bit */
-		cec_pin_high(pin);
-		break;
-
-	case CEC_ST_TX_START_BIT_LOW_CUSTOM:
-		pin->state = CEC_ST_TX_START_BIT_HIGH_CUSTOM;
-		/* Generate start bit */
-		cec_pin_high(pin);
-		break;
-
-	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG:
-		if (pin->tx_nacked) {
-			cec_pin_to_idle(pin);
-			pin->tx_msg.len = 0;
-			if (pin->tx_generated_poll)
-				break;
-			pin->work_tx_ts = ts;
-			pin->work_tx_status = CEC_TX_STATUS_NACK;
-			wake_up_interruptible(&pin->kthread_waitq);
-			break;
-		}
-		/* fall through */
-	case CEC_ST_TX_DATA_BIT_0_HIGH:
-	case CEC_ST_TX_DATA_BIT_0_HIGH_SHORT:
-	case CEC_ST_TX_DATA_BIT_0_HIGH_LONG:
-	case CEC_ST_TX_DATA_BIT_1_HIGH:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_SHORT:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_LONG:
-		/*
-		 * If the read value is 1, then all is OK, otherwise we have a
-		 * low drive condition.
-		 *
-		 * Special case: when we generate a poll message due to an
-		 * Arbitration Lost error injection, then ignore this since
-		 * the pin can actually be low in that case.
-		 */
-		if (!cec_pin_read(pin) && !pin->tx_generated_poll) {
-			/*
-			 * It's 0, so someone detected an error and pulled the
-			 * line low for 1.5 times the nominal bit period.
-			 */
-			pin->tx_msg.len = 0;
-			pin->state = CEC_ST_TX_WAIT_FOR_HIGH;
-			pin->work_tx_ts = ts;
-			pin->work_tx_status = CEC_TX_STATUS_LOW_DRIVE;
-			pin->tx_low_drive_cnt++;
-			wake_up_interruptible(&pin->kthread_waitq);
-			break;
-		}
-		/* fall through */
-	case CEC_ST_TX_DATA_BIT_HIGH_CUSTOM:
-		if (tx_last_bit(pin)) {
-			/* Error Injection: just stop sending after this bit */
-			cec_pin_to_idle(pin);
-			pin->tx_msg.len = 0;
-			if (pin->tx_generated_poll)
-				break;
-			pin->work_tx_ts = ts;
-			pin->work_tx_status = CEC_TX_STATUS_OK;
-			wake_up_interruptible(&pin->kthread_waitq);
-			break;
-		}
-		pin->tx_bit++;
-		/* fall through */
-	case CEC_ST_TX_START_BIT_HIGH:
-	case CEC_ST_TX_START_BIT_HIGH_SHORT:
-	case CEC_ST_TX_START_BIT_HIGH_LONG:
-	case CEC_ST_TX_START_BIT_HIGH_CUSTOM:
-		if (tx_low_drive(pin)) {
-			/* Error injection: go to low drive */
-			cec_pin_low(pin);
-			pin->state = CEC_ST_TX_LOW_DRIVE;
-			pin->tx_msg.len = 0;
-			if (pin->tx_generated_poll)
-				break;
-			pin->work_tx_ts = ts;
-			pin->work_tx_status = CEC_TX_STATUS_LOW_DRIVE;
-			pin->tx_low_drive_cnt++;
-			wake_up_interruptible(&pin->kthread_waitq);
-			break;
-		}
-		if (pin->tx_bit / 10 >= pin->tx_msg.len + pin->tx_extra_bytes) {
-			cec_pin_to_idle(pin);
-			pin->tx_msg.len = 0;
-			if (pin->tx_generated_poll)
-				break;
-			pin->work_tx_ts = ts;
-			pin->work_tx_status = CEC_TX_STATUS_OK;
-			wake_up_interruptible(&pin->kthread_waitq);
-			break;
-		}
-
-		switch (pin->tx_bit % 10) {
-		default: {
-			/*
-			 * In the CEC_ERROR_INJ_TX_ADD_BYTES case we transmit
-			 * extra bytes, so pin->tx_bit / 10 can become >= 16.
-			 * Generate bit values for those extra bytes instead
-			 * of reading them from the transmit buffer.
-			 */
-			unsigned int idx = (pin->tx_bit / 10);
-			u8 val = idx;
-
-			if (idx < pin->tx_msg.len)
-				val = pin->tx_msg.msg[idx];
-			v = val & (1 << (7 - (pin->tx_bit % 10)));
-
-			pin->state = v ? CEC_ST_TX_DATA_BIT_1_LOW :
-					 CEC_ST_TX_DATA_BIT_0_LOW;
-			break;
-		}
-		case EOM_BIT: {
-			unsigned int tot_len = pin->tx_msg.len +
-					       pin->tx_extra_bytes;
-			unsigned int tx_byte_idx = pin->tx_bit / 10;
-
-			v = !pin->tx_post_eom && tx_byte_idx == tot_len - 1;
-			if (tot_len > 1 && tx_byte_idx == tot_len - 2 &&
-			    tx_early_eom(pin)) {
-				/* Error injection: set EOM one byte early */
-				v = true;
-				pin->tx_post_eom = true;
-			} else if (v && tx_no_eom(pin)) {
-				/* Error injection: no EOM */
-				v = false;
-			}
-			pin->state = v ? CEC_ST_TX_DATA_BIT_1_LOW :
-					 CEC_ST_TX_DATA_BIT_0_LOW;
-			break;
-		}
-		case ACK_BIT:
-			pin->state = CEC_ST_TX_DATA_BIT_1_LOW;
-			break;
-		}
-		if (tx_custom_bit(pin))
-			pin->state = CEC_ST_TX_DATA_BIT_LOW_CUSTOM;
-		cec_pin_low(pin);
-		break;
-
-	case CEC_ST_TX_DATA_BIT_0_LOW:
-	case CEC_ST_TX_DATA_BIT_1_LOW:
-		v = pin->state == CEC_ST_TX_DATA_BIT_1_LOW;
-		is_ack_bit = pin->tx_bit % 10 == ACK_BIT;
-		if (v && (pin->tx_bit < 4 || is_ack_bit)) {
-			pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE;
-		} else if (!is_ack_bit && tx_short_bit(pin)) {
-			/* Error Injection: send an invalid (too short) bit */
-			pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH_SHORT :
-					 CEC_ST_TX_DATA_BIT_0_HIGH_SHORT;
-		} else if (!is_ack_bit && tx_long_bit(pin)) {
-			/* Error Injection: send an invalid (too long) bit */
-			pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH_LONG :
-					 CEC_ST_TX_DATA_BIT_0_HIGH_LONG;
-		} else {
-			pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH :
-					 CEC_ST_TX_DATA_BIT_0_HIGH;
-		}
-		cec_pin_high(pin);
-		break;
-
-	case CEC_ST_TX_DATA_BIT_LOW_CUSTOM:
-		pin->state = CEC_ST_TX_DATA_BIT_HIGH_CUSTOM;
-		cec_pin_high(pin);
-		break;
-
-	case CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE:
-		/* Read the CEC value at the sample time */
-		v = cec_pin_read(pin);
-		is_ack_bit = pin->tx_bit % 10 == ACK_BIT;
-		/*
-		 * If v == 0 and we're within the first 4 bits
-		 * of the initiator, then someone else started
-		 * transmitting and we lost the arbitration
-		 * (i.e. the logical address of the other
-		 * transmitter has more leading 0 bits in the
-		 * initiator).
-		 */
-		if (!v && !is_ack_bit && !pin->tx_generated_poll) {
-			pin->tx_msg.len = 0;
-			pin->work_tx_ts = ts;
-			pin->work_tx_status = CEC_TX_STATUS_ARB_LOST;
-			wake_up_interruptible(&pin->kthread_waitq);
-			pin->rx_bit = pin->tx_bit;
-			pin->tx_bit = 0;
-			memset(pin->rx_msg.msg, 0, sizeof(pin->rx_msg.msg));
-			pin->rx_msg.msg[0] = pin->tx_msg.msg[0];
-			pin->rx_msg.msg[0] &= (0xff << (8 - pin->rx_bit));
-			pin->rx_msg.len = 0;
-			pin->ts = ktime_sub_us(ts, CEC_TIM_DATA_BIT_SAMPLE);
-			pin->state = CEC_ST_RX_DATA_POST_SAMPLE;
-			pin->rx_bit++;
-			break;
-		}
-		pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE;
-		if (!is_ack_bit && tx_short_bit(pin)) {
-			/* Error Injection: send an invalid (too short) bit */
-			pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT;
-		} else if (!is_ack_bit && tx_long_bit(pin)) {
-			/* Error Injection: send an invalid (too long) bit */
-			pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG;
-		}
-		if (!is_ack_bit)
-			break;
-		/* Was the message ACKed? */
-		ack = cec_msg_is_broadcast(&pin->tx_msg) ? v : !v;
-		if (!ack && (!pin->tx_ignore_nack_until_eom ||
-		    pin->tx_bit / 10 == pin->tx_msg.len - 1) &&
-		    !pin->tx_post_eom) {
-			/*
-			 * Note: the CEC spec is ambiguous regarding
-			 * what action to take when a NACK appears
-			 * before the last byte of the payload was
-			 * transmitted: either stop transmitting
-			 * immediately, or wait until the last byte
-			 * was transmitted.
-			 *
-			 * Most CEC implementations appear to stop
-			 * immediately, and that's what we do here
-			 * as well.
-			 */
-			pin->tx_nacked = true;
-		}
-		break;
-
-	case CEC_ST_TX_PULSE_LOW_CUSTOM:
-		cec_pin_high(pin);
-		pin->state = CEC_ST_TX_PULSE_HIGH_CUSTOM;
-		break;
-
-	case CEC_ST_TX_PULSE_HIGH_CUSTOM:
-		cec_pin_to_idle(pin);
-		break;
-
-	default:
-		break;
-	}
-}
-
-/*
- * Handle Receive-related states
- *
- * Basic state changes when receiving:
- *
- *	Rx Start Bit Low -> Rx Start Bit High ->
- *   Regular data bits + EOM:
- *	Rx Data Sample -> Rx Data Post Sample -> Rx Data High ->
- *   Ack bit 0:
- *	Rx Ack Low -> Rx Ack Low Post -> Rx Data High ->
- *   Ack bit 1:
- *	Rx Ack High Post -> Rx Data High ->
- *   Ack bit 0 && EOM:
- *	Rx Ack Low -> Rx Ack Low Post -> Rx Ack Finish -> Idle
- */
-static void cec_pin_rx_states(struct cec_pin *pin, ktime_t ts)
-{
-	s32 delta;
-	bool v;
-	bool ack;
-	bool bcast, for_us;
-	u8 dest;
-	u8 poll;
-
-	switch (pin->state) {
-	/* Receive states */
-	case CEC_ST_RX_START_BIT_LOW:
-		v = cec_pin_read(pin);
-		if (!v)
-			break;
-		pin->state = CEC_ST_RX_START_BIT_HIGH;
-		delta = ktime_us_delta(ts, pin->ts);
-		/* Start bit low is too short, go back to idle */
-		if (delta < CEC_TIM_START_BIT_LOW_MIN - CEC_TIM_IDLE_SAMPLE) {
-			if (!pin->rx_start_bit_low_too_short_cnt++) {
-				pin->rx_start_bit_low_too_short_ts = ktime_to_ns(pin->ts);
-				pin->rx_start_bit_low_too_short_delta = delta;
-			}
-			cec_pin_to_idle(pin);
-			break;
-		}
-		if (rx_arb_lost(pin, &poll)) {
-			cec_msg_init(&pin->tx_msg, poll >> 4, poll & 0xf);
-			pin->tx_generated_poll = true;
-			pin->tx_extra_bytes = 0;
-			pin->state = CEC_ST_TX_START_BIT_HIGH;
-			pin->ts = ts;
-		}
-		break;
-
-	case CEC_ST_RX_START_BIT_HIGH:
-		v = cec_pin_read(pin);
-		delta = ktime_us_delta(ts, pin->ts);
-		/*
-		 * Unfortunately the spec does not specify when to give up
-		 * and go to idle. We just pick TOTAL_LONG.
-		 */
-		if (v && delta > CEC_TIM_START_BIT_TOTAL_LONG) {
-			pin->rx_start_bit_too_long_cnt++;
-			cec_pin_to_idle(pin);
-			break;
-		}
-		if (v)
-			break;
-		/* Start bit is too short, go back to idle */
-		if (delta < CEC_TIM_START_BIT_TOTAL_MIN - CEC_TIM_IDLE_SAMPLE) {
-			if (!pin->rx_start_bit_too_short_cnt++) {
-				pin->rx_start_bit_too_short_ts = ktime_to_ns(pin->ts);
-				pin->rx_start_bit_too_short_delta = delta;
-			}
-			cec_pin_to_idle(pin);
-			break;
-		}
-		if (rx_low_drive(pin)) {
-			/* Error injection: go to low drive */
-			cec_pin_low(pin);
-			pin->state = CEC_ST_RX_LOW_DRIVE;
-			pin->rx_low_drive_cnt++;
-			break;
-		}
-		pin->state = CEC_ST_RX_DATA_SAMPLE;
-		pin->ts = ts;
-		pin->rx_eom = false;
-		break;
-
-	case CEC_ST_RX_DATA_SAMPLE:
-		v = cec_pin_read(pin);
-		pin->state = CEC_ST_RX_DATA_POST_SAMPLE;
-		switch (pin->rx_bit % 10) {
-		default:
-			if (pin->rx_bit / 10 < CEC_MAX_MSG_SIZE)
-				pin->rx_msg.msg[pin->rx_bit / 10] |=
-					v << (7 - (pin->rx_bit % 10));
-			break;
-		case EOM_BIT:
-			pin->rx_eom = v;
-			pin->rx_msg.len = pin->rx_bit / 10 + 1;
-			break;
-		case ACK_BIT:
-			break;
-		}
-		pin->rx_bit++;
-		break;
-
-	case CEC_ST_RX_DATA_POST_SAMPLE:
-		pin->state = CEC_ST_RX_DATA_WAIT_FOR_LOW;
-		break;
-
-	case CEC_ST_RX_DATA_WAIT_FOR_LOW:
-		v = cec_pin_read(pin);
-		delta = ktime_us_delta(ts, pin->ts);
-		/*
-		 * Unfortunately the spec does not specify when to give up
-		 * and go to idle. We just pick TOTAL_LONG.
-		 */
-		if (v && delta > CEC_TIM_DATA_BIT_TOTAL_LONG) {
-			pin->rx_data_bit_too_long_cnt++;
-			cec_pin_to_idle(pin);
-			break;
-		}
-		if (v)
-			break;
-
-		if (rx_low_drive(pin)) {
-			/* Error injection: go to low drive */
-			cec_pin_low(pin);
-			pin->state = CEC_ST_RX_LOW_DRIVE;
-			pin->rx_low_drive_cnt++;
-			break;
-		}
-
-		/*
-		 * Go to low drive state when the total bit time is
-		 * too short.
-		 */
-		if (delta < CEC_TIM_DATA_BIT_TOTAL_MIN) {
-			if (!pin->rx_data_bit_too_short_cnt++) {
-				pin->rx_data_bit_too_short_ts = ktime_to_ns(pin->ts);
-				pin->rx_data_bit_too_short_delta = delta;
-			}
-			cec_pin_low(pin);
-			pin->state = CEC_ST_RX_LOW_DRIVE;
-			pin->rx_low_drive_cnt++;
-			break;
-		}
-		pin->ts = ts;
-		if (pin->rx_bit % 10 != 9) {
-			pin->state = CEC_ST_RX_DATA_SAMPLE;
-			break;
-		}
-
-		dest = cec_msg_destination(&pin->rx_msg);
-		bcast = dest == CEC_LOG_ADDR_BROADCAST;
-		/* for_us == broadcast or directed to us */
-		for_us = bcast || (pin->la_mask & (1 << dest));
-		/* ACK bit value */
-		ack = bcast ? 1 : !for_us;
-
-		if (for_us && rx_nack(pin)) {
-			/* Error injection: toggle the ACK bit */
-			ack = !ack;
-		}
-
-		if (ack) {
-			/* No need to write to the bus, just wait */
-			pin->state = CEC_ST_RX_ACK_HIGH_POST;
-			break;
-		}
-		cec_pin_low(pin);
-		pin->state = CEC_ST_RX_ACK_LOW;
-		break;
-
-	case CEC_ST_RX_ACK_LOW:
-		cec_pin_high(pin);
-		pin->state = CEC_ST_RX_ACK_LOW_POST;
-		break;
-
-	case CEC_ST_RX_ACK_LOW_POST:
-	case CEC_ST_RX_ACK_HIGH_POST:
-		v = cec_pin_read(pin);
-		if (v && pin->rx_eom) {
-			pin->work_rx_msg = pin->rx_msg;
-			pin->work_rx_msg.rx_ts = ktime_to_ns(ts);
-			wake_up_interruptible(&pin->kthread_waitq);
-			pin->ts = ts;
-			pin->state = CEC_ST_RX_ACK_FINISH;
-			break;
-		}
-		pin->rx_bit++;
-		pin->state = CEC_ST_RX_DATA_WAIT_FOR_LOW;
-		break;
-
-	case CEC_ST_RX_ACK_FINISH:
-		cec_pin_to_idle(pin);
-		break;
-
-	default:
-		break;
-	}
-}
-
-/*
- * Main timer function
- *
- */
-static enum hrtimer_restart cec_pin_timer(struct hrtimer *timer)
-{
-	struct cec_pin *pin = container_of(timer, struct cec_pin, timer);
-	struct cec_adapter *adap = pin->adap;
-	ktime_t ts;
-	s32 delta;
-	u32 usecs;
-
-	ts = ktime_get();
-	if (ktime_to_ns(pin->timer_ts)) {
-		delta = ktime_us_delta(ts, pin->timer_ts);
-		pin->timer_cnt++;
-		if (delta > 100 && pin->state != CEC_ST_IDLE) {
-			/* Keep track of timer overruns */
-			pin->timer_sum_overrun += delta;
-			pin->timer_100ms_overruns++;
-			if (delta > 300)
-				pin->timer_300ms_overruns++;
-			if (delta > pin->timer_max_overrun)
-				pin->timer_max_overrun = delta;
-		}
-	}
-	if (adap->monitor_pin_cnt)
-		cec_pin_read(pin);
-
-	if (pin->wait_usecs) {
-		/*
-		 * If we are monitoring the pin, then we have to
-		 * sample at regular intervals.
-		 */
-		if (pin->wait_usecs > 150) {
-			pin->wait_usecs -= 100;
-			pin->timer_ts = ktime_add_us(ts, 100);
-			hrtimer_forward_now(timer, ns_to_ktime(100000));
-			return HRTIMER_RESTART;
-		}
-		if (pin->wait_usecs > 100) {
-			pin->wait_usecs /= 2;
-			pin->timer_ts = ktime_add_us(ts, pin->wait_usecs);
-			hrtimer_forward_now(timer,
-					ns_to_ktime(pin->wait_usecs * 1000));
-			return HRTIMER_RESTART;
-		}
-		pin->timer_ts = ktime_add_us(ts, pin->wait_usecs);
-		hrtimer_forward_now(timer,
-				    ns_to_ktime(pin->wait_usecs * 1000));
-		pin->wait_usecs = 0;
-		return HRTIMER_RESTART;
-	}
-
-	switch (pin->state) {
-	/* Transmit states */
-	case CEC_ST_TX_WAIT_FOR_HIGH:
-	case CEC_ST_TX_START_BIT_LOW:
-	case CEC_ST_TX_START_BIT_HIGH:
-	case CEC_ST_TX_START_BIT_HIGH_SHORT:
-	case CEC_ST_TX_START_BIT_HIGH_LONG:
-	case CEC_ST_TX_START_BIT_LOW_CUSTOM:
-	case CEC_ST_TX_START_BIT_HIGH_CUSTOM:
-	case CEC_ST_TX_DATA_BIT_0_LOW:
-	case CEC_ST_TX_DATA_BIT_0_HIGH:
-	case CEC_ST_TX_DATA_BIT_0_HIGH_SHORT:
-	case CEC_ST_TX_DATA_BIT_0_HIGH_LONG:
-	case CEC_ST_TX_DATA_BIT_1_LOW:
-	case CEC_ST_TX_DATA_BIT_1_HIGH:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_SHORT:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_LONG:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT:
-	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG:
-	case CEC_ST_TX_DATA_BIT_LOW_CUSTOM:
-	case CEC_ST_TX_DATA_BIT_HIGH_CUSTOM:
-	case CEC_ST_TX_PULSE_LOW_CUSTOM:
-	case CEC_ST_TX_PULSE_HIGH_CUSTOM:
-		cec_pin_tx_states(pin, ts);
-		break;
-
-	/* Receive states */
-	case CEC_ST_RX_START_BIT_LOW:
-	case CEC_ST_RX_START_BIT_HIGH:
-	case CEC_ST_RX_DATA_SAMPLE:
-	case CEC_ST_RX_DATA_POST_SAMPLE:
-	case CEC_ST_RX_DATA_WAIT_FOR_LOW:
-	case CEC_ST_RX_ACK_LOW:
-	case CEC_ST_RX_ACK_LOW_POST:
-	case CEC_ST_RX_ACK_HIGH_POST:
-	case CEC_ST_RX_ACK_FINISH:
-		cec_pin_rx_states(pin, ts);
-		break;
-
-	case CEC_ST_IDLE:
-	case CEC_ST_TX_WAIT:
-		if (!cec_pin_high(pin)) {
-			/* Start bit, switch to receive state */
-			pin->ts = ts;
-			pin->state = CEC_ST_RX_START_BIT_LOW;
-			/*
-			 * If a transmit is pending, then that transmit should
-			 * use a signal free time of no more than
-			 * CEC_SIGNAL_FREE_TIME_NEW_INITIATOR since it will
-			 * have a new initiator due to the receive that is now
-			 * starting.
-			 */
-			if (pin->tx_msg.len && pin->tx_signal_free_time >
-			    CEC_SIGNAL_FREE_TIME_NEW_INITIATOR)
-				pin->tx_signal_free_time =
-					CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
-			break;
-		}
-		if (ktime_to_ns(pin->ts) == 0)
-			pin->ts = ts;
-		if (pin->tx_msg.len) {
-			/*
-			 * Check if the bus has been free for long enough
-			 * so we can kick off the pending transmit.
-			 */
-			delta = ktime_us_delta(ts, pin->ts);
-			if (delta / CEC_TIM_DATA_BIT_TOTAL >
-			    pin->tx_signal_free_time) {
-				pin->tx_nacked = false;
-				if (tx_custom_start(pin))
-					pin->state = CEC_ST_TX_START_BIT_LOW_CUSTOM;
-				else
-					pin->state = CEC_ST_TX_START_BIT_LOW;
-				/* Generate start bit */
-				cec_pin_low(pin);
-				break;
-			}
-			if (delta / CEC_TIM_DATA_BIT_TOTAL >
-			    pin->tx_signal_free_time - 1)
-				pin->state = CEC_ST_TX_WAIT;
-			break;
-		}
-		if (pin->tx_custom_pulse && pin->state == CEC_ST_IDLE) {
-			pin->tx_custom_pulse = false;
-			/* Generate custom pulse */
-			cec_pin_low(pin);
-			pin->state = CEC_ST_TX_PULSE_LOW_CUSTOM;
-			break;
-		}
-		if (pin->state != CEC_ST_IDLE || pin->ops->enable_irq == NULL ||
-		    pin->enable_irq_failed || adap->is_configuring ||
-		    adap->is_configured || adap->monitor_all_cnt)
-			break;
-		/* Switch to interrupt mode */
-		atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_ENABLE);
-		pin->state = CEC_ST_RX_IRQ;
-		wake_up_interruptible(&pin->kthread_waitq);
-		return HRTIMER_NORESTART;
-
-	case CEC_ST_TX_LOW_DRIVE:
-	case CEC_ST_RX_LOW_DRIVE:
-		cec_pin_high(pin);
-		cec_pin_to_idle(pin);
-		break;
-
-	default:
-		break;
-	}
-
-	switch (pin->state) {
-	case CEC_ST_TX_START_BIT_LOW_CUSTOM:
-	case CEC_ST_TX_DATA_BIT_LOW_CUSTOM:
-	case CEC_ST_TX_PULSE_LOW_CUSTOM:
-		usecs = pin->tx_custom_low_usecs;
-		break;
-	case CEC_ST_TX_START_BIT_HIGH_CUSTOM:
-	case CEC_ST_TX_DATA_BIT_HIGH_CUSTOM:
-	case CEC_ST_TX_PULSE_HIGH_CUSTOM:
-		usecs = pin->tx_custom_high_usecs;
-		break;
-	default:
-		usecs = states[pin->state].usecs;
-		break;
-	}
-
-	if (!adap->monitor_pin_cnt || usecs <= 150) {
-		pin->wait_usecs = 0;
-		pin->timer_ts = ktime_add_us(ts, usecs);
-		hrtimer_forward_now(timer,
-				ns_to_ktime(usecs * 1000));
-		return HRTIMER_RESTART;
-	}
-	pin->wait_usecs = usecs - 100;
-	pin->timer_ts = ktime_add_us(ts, 100);
-	hrtimer_forward_now(timer, ns_to_ktime(100000));
-	return HRTIMER_RESTART;
-}
-
-static int cec_pin_thread_func(void *_adap)
-{
-	struct cec_adapter *adap = _adap;
-	struct cec_pin *pin = adap->pin;
-
-	for (;;) {
-		wait_event_interruptible(pin->kthread_waitq,
-			kthread_should_stop() ||
-			pin->work_rx_msg.len ||
-			pin->work_tx_status ||
-			atomic_read(&pin->work_irq_change) ||
-			atomic_read(&pin->work_pin_num_events));
-
-		if (pin->work_rx_msg.len) {
-			struct cec_msg *msg = &pin->work_rx_msg;
-
-			if (msg->len > 1 && msg->len < CEC_MAX_MSG_SIZE &&
-			    rx_add_byte(pin)) {
-				/* Error injection: add byte to the message */
-				msg->msg[msg->len++] = 0x55;
-			}
-			if (msg->len > 2 && rx_remove_byte(pin)) {
-				/* Error injection: remove byte from message */
-				msg->len--;
-			}
-			if (msg->len > CEC_MAX_MSG_SIZE)
-				msg->len = CEC_MAX_MSG_SIZE;
-			cec_received_msg_ts(adap, msg,
-				ns_to_ktime(pin->work_rx_msg.rx_ts));
-			msg->len = 0;
-		}
-		if (pin->work_tx_status) {
-			unsigned int tx_status = pin->work_tx_status;
-
-			pin->work_tx_status = 0;
-			cec_transmit_attempt_done_ts(adap, tx_status,
-						     pin->work_tx_ts);
-		}
-
-		while (atomic_read(&pin->work_pin_num_events)) {
-			unsigned int idx = pin->work_pin_events_rd;
-			u8 v = pin->work_pin_events[idx];
-
-			cec_queue_pin_cec_event(adap,
-						v & CEC_PIN_EVENT_FL_IS_HIGH,
-						v & CEC_PIN_EVENT_FL_DROPPED,
-						pin->work_pin_ts[idx]);
-			pin->work_pin_events_rd = (idx + 1) % CEC_NUM_PIN_EVENTS;
-			atomic_dec(&pin->work_pin_num_events);
-		}
-
-		switch (atomic_xchg(&pin->work_irq_change,
-				    CEC_PIN_IRQ_UNCHANGED)) {
-		case CEC_PIN_IRQ_DISABLE:
-			pin->ops->disable_irq(adap);
-			cec_pin_high(pin);
-			cec_pin_to_idle(pin);
-			hrtimer_start(&pin->timer, ns_to_ktime(0),
-				      HRTIMER_MODE_REL);
-			break;
-		case CEC_PIN_IRQ_ENABLE:
-			pin->enable_irq_failed = !pin->ops->enable_irq(adap);
-			if (pin->enable_irq_failed) {
-				cec_pin_to_idle(pin);
-				hrtimer_start(&pin->timer, ns_to_ktime(0),
-					      HRTIMER_MODE_REL);
-			}
-			break;
-		default:
-			break;
-		}
-
-		if (kthread_should_stop())
-			break;
-	}
-	return 0;
-}
-
-static int cec_pin_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct cec_pin *pin = adap->pin;
-
-	pin->enabled = enable;
-	if (enable) {
-		atomic_set(&pin->work_pin_num_events, 0);
-		pin->work_pin_events_rd = pin->work_pin_events_wr = 0;
-		pin->work_pin_events_dropped = false;
-		cec_pin_read(pin);
-		cec_pin_to_idle(pin);
-		pin->tx_msg.len = 0;
-		pin->timer_ts = ns_to_ktime(0);
-		atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_UNCHANGED);
-		pin->kthread = kthread_run(cec_pin_thread_func, adap,
-					   "cec-pin");
-		if (IS_ERR(pin->kthread)) {
-			pr_err("cec-pin: kernel_thread() failed\n");
-			return PTR_ERR(pin->kthread);
-		}
-		hrtimer_start(&pin->timer, ns_to_ktime(0),
-			      HRTIMER_MODE_REL);
-	} else {
-		if (pin->ops->disable_irq)
-			pin->ops->disable_irq(adap);
-		hrtimer_cancel(&pin->timer);
-		kthread_stop(pin->kthread);
-		cec_pin_read(pin);
-		cec_pin_to_idle(pin);
-		pin->state = CEC_ST_OFF;
-	}
-	return 0;
-}
-
-static int cec_pin_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
-{
-	struct cec_pin *pin = adap->pin;
-
-	if (log_addr == CEC_LOG_ADDR_INVALID)
-		pin->la_mask = 0;
-	else
-		pin->la_mask |= (1 << log_addr);
-	return 0;
-}
-
-void cec_pin_start_timer(struct cec_pin *pin)
-{
-	if (pin->state != CEC_ST_RX_IRQ)
-		return;
-
-	atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_UNCHANGED);
-	pin->ops->disable_irq(pin->adap);
-	cec_pin_high(pin);
-	cec_pin_to_idle(pin);
-	hrtimer_start(&pin->timer, ns_to_ktime(0), HRTIMER_MODE_REL);
-}
-
-static int cec_pin_adap_transmit(struct cec_adapter *adap, u8 attempts,
-				      u32 signal_free_time, struct cec_msg *msg)
-{
-	struct cec_pin *pin = adap->pin;
-
-	/*
-	 * If a receive is in progress, then this transmit should use
-	 * a signal free time of max CEC_SIGNAL_FREE_TIME_NEW_INITIATOR
-	 * since when it starts transmitting it will have a new initiator.
-	 */
-	if (pin->state != CEC_ST_IDLE &&
-	    signal_free_time > CEC_SIGNAL_FREE_TIME_NEW_INITIATOR)
-		signal_free_time = CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
-
-	pin->tx_signal_free_time = signal_free_time;
-	pin->tx_extra_bytes = 0;
-	pin->tx_msg = *msg;
-	if (msg->len > 1) {
-		/* Error injection: add byte to the message */
-		pin->tx_extra_bytes = tx_add_bytes(pin);
-	}
-	if (msg->len > 2 && tx_remove_byte(pin)) {
-		/* Error injection: remove byte from the message */
-		pin->tx_msg.len--;
-	}
-	pin->work_tx_status = 0;
-	pin->tx_bit = 0;
-	cec_pin_start_timer(pin);
-	return 0;
-}
-
-static void cec_pin_adap_status(struct cec_adapter *adap,
-				       struct seq_file *file)
-{
-	struct cec_pin *pin = adap->pin;
-
-	seq_printf(file, "state: %s\n", states[pin->state].name);
-	seq_printf(file, "tx_bit: %d\n", pin->tx_bit);
-	seq_printf(file, "rx_bit: %d\n", pin->rx_bit);
-	seq_printf(file, "cec pin: %d\n", pin->ops->read(adap));
-	seq_printf(file, "cec pin events dropped: %u\n",
-		   pin->work_pin_events_dropped_cnt);
-	seq_printf(file, "irq failed: %d\n", pin->enable_irq_failed);
-	if (pin->timer_100ms_overruns) {
-		seq_printf(file, "timer overruns > 100ms: %u of %u\n",
-			   pin->timer_100ms_overruns, pin->timer_cnt);
-		seq_printf(file, "timer overruns > 300ms: %u of %u\n",
-			   pin->timer_300ms_overruns, pin->timer_cnt);
-		seq_printf(file, "max timer overrun: %u usecs\n",
-			   pin->timer_max_overrun);
-		seq_printf(file, "avg timer overrun: %u usecs\n",
-			   pin->timer_sum_overrun / pin->timer_100ms_overruns);
-	}
-	if (pin->rx_start_bit_low_too_short_cnt)
-		seq_printf(file,
-			   "rx start bit low too short: %u (delta %u, ts %llu)\n",
-			   pin->rx_start_bit_low_too_short_cnt,
-			   pin->rx_start_bit_low_too_short_delta,
-			   pin->rx_start_bit_low_too_short_ts);
-	if (pin->rx_start_bit_too_short_cnt)
-		seq_printf(file,
-			   "rx start bit too short: %u (delta %u, ts %llu)\n",
-			   pin->rx_start_bit_too_short_cnt,
-			   pin->rx_start_bit_too_short_delta,
-			   pin->rx_start_bit_too_short_ts);
-	if (pin->rx_start_bit_too_long_cnt)
-		seq_printf(file, "rx start bit too long: %u\n",
-			   pin->rx_start_bit_too_long_cnt);
-	if (pin->rx_data_bit_too_short_cnt)
-		seq_printf(file,
-			   "rx data bit too short: %u (delta %u, ts %llu)\n",
-			   pin->rx_data_bit_too_short_cnt,
-			   pin->rx_data_bit_too_short_delta,
-			   pin->rx_data_bit_too_short_ts);
-	if (pin->rx_data_bit_too_long_cnt)
-		seq_printf(file, "rx data bit too long: %u\n",
-			   pin->rx_data_bit_too_long_cnt);
-	seq_printf(file, "rx initiated low drive: %u\n", pin->rx_low_drive_cnt);
-	seq_printf(file, "tx detected low drive: %u\n", pin->tx_low_drive_cnt);
-	pin->work_pin_events_dropped_cnt = 0;
-	pin->timer_cnt = 0;
-	pin->timer_100ms_overruns = 0;
-	pin->timer_300ms_overruns = 0;
-	pin->timer_max_overrun = 0;
-	pin->timer_sum_overrun = 0;
-	pin->rx_start_bit_low_too_short_cnt = 0;
-	pin->rx_start_bit_too_short_cnt = 0;
-	pin->rx_start_bit_too_long_cnt = 0;
-	pin->rx_data_bit_too_short_cnt = 0;
-	pin->rx_data_bit_too_long_cnt = 0;
-	pin->rx_low_drive_cnt = 0;
-	pin->tx_low_drive_cnt = 0;
-	if (pin->ops->status)
-		pin->ops->status(adap, file);
-}
-
-static int cec_pin_adap_monitor_all_enable(struct cec_adapter *adap,
-						  bool enable)
-{
-	struct cec_pin *pin = adap->pin;
-
-	pin->monitor_all = enable;
-	return 0;
-}
-
-static void cec_pin_adap_free(struct cec_adapter *adap)
-{
-	struct cec_pin *pin = adap->pin;
-
-	if (pin->ops->free)
-		pin->ops->free(adap);
-	adap->pin = NULL;
-	kfree(pin);
-}
-
-static int cec_pin_received(struct cec_adapter *adap, struct cec_msg *msg)
-{
-	struct cec_pin *pin = adap->pin;
-
-	if (pin->ops->received)
-		return pin->ops->received(adap, msg);
-	return -ENOMSG;
-}
-
-void cec_pin_changed(struct cec_adapter *adap, bool value)
-{
-	struct cec_pin *pin = adap->pin;
-
-	cec_pin_update(pin, value, false);
-	if (!value && (adap->is_configuring || adap->is_configured ||
-		       adap->monitor_all_cnt))
-		atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_DISABLE);
-}
-EXPORT_SYMBOL_GPL(cec_pin_changed);
-
-static const struct cec_adap_ops cec_pin_adap_ops = {
-	.adap_enable = cec_pin_adap_enable,
-	.adap_monitor_all_enable = cec_pin_adap_monitor_all_enable,
-	.adap_log_addr = cec_pin_adap_log_addr,
-	.adap_transmit = cec_pin_adap_transmit,
-	.adap_status = cec_pin_adap_status,
-	.adap_free = cec_pin_adap_free,
-#ifdef CONFIG_CEC_PIN_ERROR_INJ
-	.error_inj_parse_line = cec_pin_error_inj_parse_line,
-	.error_inj_show = cec_pin_error_inj_show,
-#endif
-	.received = cec_pin_received,
-};
-
-struct cec_adapter *cec_pin_allocate_adapter(const struct cec_pin_ops *pin_ops,
-					void *priv, const char *name, u32 caps)
-{
-	struct cec_adapter *adap;
-	struct cec_pin *pin = kzalloc(sizeof(*pin), GFP_KERNEL);
-
-	if (pin == NULL)
-		return ERR_PTR(-ENOMEM);
-	pin->ops = pin_ops;
-	hrtimer_init(&pin->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	pin->timer.function = cec_pin_timer;
-	init_waitqueue_head(&pin->kthread_waitq);
-	pin->tx_custom_low_usecs = CEC_TIM_CUSTOM_DEFAULT;
-	pin->tx_custom_high_usecs = CEC_TIM_CUSTOM_DEFAULT;
-
-	adap = cec_allocate_adapter(&cec_pin_adap_ops, priv, name,
-			    caps | CEC_CAP_MONITOR_ALL | CEC_CAP_MONITOR_PIN,
-			    CEC_MAX_LOG_ADDRS);
-
-	if (IS_ERR(adap)) {
-		kfree(pin);
-		return adap;
-	}
-
-	adap->pin = pin;
-	pin->adap = adap;
-	cec_pin_update(pin, cec_pin_high(pin), true);
-	return adap;
-}
-EXPORT_SYMBOL_GPL(cec_pin_allocate_adapter);
diff --git a/drivers/media/cec/cec-priv.h b/drivers/media/cec/cec-priv.h
deleted file mode 100644
index 9bbd05053d42..000000000000
--- a/drivers/media/cec/cec-priv.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * cec-priv.h - HDMI Consumer Electronics Control internal header
- *
- * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _CEC_PRIV_H
-#define _CEC_PRIV_H
-
-#include <linux/cec-funcs.h>
-#include <media/cec-notifier.h>
-
-#define dprintk(lvl, fmt, arg...)					\
-	do {								\
-		if (lvl <= cec_debug)					\
-			pr_info("cec-%s: " fmt, adap->name, ## arg);	\
-	} while (0)
-
-/* devnode to cec_adapter */
-#define to_cec_adapter(node) container_of(node, struct cec_adapter, devnode)
-
-static inline bool msg_is_raw(const struct cec_msg *msg)
-{
-	return msg->flags & CEC_MSG_FL_RAW;
-}
-
-/* cec-core.c */
-extern int cec_debug;
-int cec_get_device(struct cec_devnode *devnode);
-void cec_put_device(struct cec_devnode *devnode);
-
-/* cec-adap.c */
-int cec_monitor_all_cnt_inc(struct cec_adapter *adap);
-void cec_monitor_all_cnt_dec(struct cec_adapter *adap);
-int cec_monitor_pin_cnt_inc(struct cec_adapter *adap);
-void cec_monitor_pin_cnt_dec(struct cec_adapter *adap);
-int cec_adap_status(struct seq_file *file, void *priv);
-int cec_thread_func(void *_adap);
-void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block);
-int __cec_s_log_addrs(struct cec_adapter *adap,
-		      struct cec_log_addrs *log_addrs, bool block);
-int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg,
-			struct cec_fh *fh, bool block);
-void cec_queue_event_fh(struct cec_fh *fh,
-			const struct cec_event *new_ev, u64 ts);
-
-/* cec-api.c */
-extern const struct file_operations cec_devnode_fops;
-
-#endif
diff --git a/drivers/media/cec/core/Makefile b/drivers/media/cec/core/Makefile
new file mode 100644
index 000000000000..ad8677d8c896
--- /dev/null
+++ b/drivers/media/cec/core/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+cec-objs := cec-core.o cec-adap.o cec-api.o
+
+ifeq ($(CONFIG_CEC_NOTIFIER),y)
+  cec-objs += cec-notifier.o
+endif
+
+ifeq ($(CONFIG_CEC_PIN),y)
+  cec-objs += cec-pin.o
+endif
+
+ifeq ($(CONFIG_CEC_PIN_ERROR_INJ),y)
+  cec-objs += cec-pin-error-inj.o
+endif
+
+obj-$(CONFIG_CEC_CORE) += cec.o
diff --git a/drivers/media/cec/core/cec-adap.c b/drivers/media/cec/core/cec-adap.c
new file mode 100644
index 000000000000..6c95dc471d4c
--- /dev/null
+++ b/drivers/media/cec/core/cec-adap.c
@@ -0,0 +1,2199 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cec-adap.c - HDMI Consumer Electronics Control framework - CEC adapter
+ *
+ * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/ktime.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_device.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_file.h>
+
+#include "cec-priv.h"
+
+static void cec_fill_msg_report_features(struct cec_adapter *adap,
+					 struct cec_msg *msg,
+					 unsigned int la_idx);
+
+/*
+ * 400 ms is the time it takes for one 16 byte message to be
+ * transferred and 5 is the maximum number of retries. Add
+ * another 100 ms as a margin. So if the transmit doesn't
+ * finish before that time something is really wrong and we
+ * have to time out.
+ *
+ * This is a sign that something it really wrong and a warning
+ * will be issued.
+ */
+#define CEC_XFER_TIMEOUT_MS (5 * 400 + 100)
+
+#define call_op(adap, op, arg...) \
+	(adap->ops->op ? adap->ops->op(adap, ## arg) : 0)
+
+#define call_void_op(adap, op, arg...)			\
+	do {						\
+		if (adap->ops->op)			\
+			adap->ops->op(adap, ## arg);	\
+	} while (0)
+
+static int cec_log_addr2idx(const struct cec_adapter *adap, u8 log_addr)
+{
+	int i;
+
+	for (i = 0; i < adap->log_addrs.num_log_addrs; i++)
+		if (adap->log_addrs.log_addr[i] == log_addr)
+			return i;
+	return -1;
+}
+
+static unsigned int cec_log_addr2dev(const struct cec_adapter *adap, u8 log_addr)
+{
+	int i = cec_log_addr2idx(adap, log_addr);
+
+	return adap->log_addrs.primary_device_type[i < 0 ? 0 : i];
+}
+
+u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
+			   unsigned int *offset)
+{
+	unsigned int loc = cec_get_edid_spa_location(edid, size);
+
+	if (offset)
+		*offset = loc;
+	if (loc == 0)
+		return CEC_PHYS_ADDR_INVALID;
+	return (edid[loc] << 8) | edid[loc + 1];
+}
+EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr);
+
+void cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info,
+				 const struct drm_connector *connector)
+{
+	memset(conn_info, 0, sizeof(*conn_info));
+	conn_info->type = CEC_CONNECTOR_TYPE_DRM;
+	conn_info->drm.card_no = connector->dev->primary->index;
+	conn_info->drm.connector_id = connector->base.id;
+}
+EXPORT_SYMBOL_GPL(cec_fill_conn_info_from_drm);
+
+/*
+ * Queue a new event for this filehandle. If ts == 0, then set it
+ * to the current time.
+ *
+ * We keep a queue of at most max_event events where max_event differs
+ * per event. If the queue becomes full, then drop the oldest event and
+ * keep track of how many events we've dropped.
+ */
+void cec_queue_event_fh(struct cec_fh *fh,
+			const struct cec_event *new_ev, u64 ts)
+{
+	static const u16 max_events[CEC_NUM_EVENTS] = {
+		1, 1, 800, 800, 8, 8, 8, 8
+	};
+	struct cec_event_entry *entry;
+	unsigned int ev_idx = new_ev->event - 1;
+
+	if (WARN_ON(ev_idx >= ARRAY_SIZE(fh->events)))
+		return;
+
+	if (ts == 0)
+		ts = ktime_get_ns();
+
+	mutex_lock(&fh->lock);
+	if (ev_idx < CEC_NUM_CORE_EVENTS)
+		entry = &fh->core_events[ev_idx];
+	else
+		entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (entry) {
+		if (new_ev->event == CEC_EVENT_LOST_MSGS &&
+		    fh->queued_events[ev_idx]) {
+			entry->ev.lost_msgs.lost_msgs +=
+				new_ev->lost_msgs.lost_msgs;
+			goto unlock;
+		}
+		entry->ev = *new_ev;
+		entry->ev.ts = ts;
+
+		if (fh->queued_events[ev_idx] < max_events[ev_idx]) {
+			/* Add new msg at the end of the queue */
+			list_add_tail(&entry->list, &fh->events[ev_idx]);
+			fh->queued_events[ev_idx]++;
+			fh->total_queued_events++;
+			goto unlock;
+		}
+
+		if (ev_idx >= CEC_NUM_CORE_EVENTS) {
+			list_add_tail(&entry->list, &fh->events[ev_idx]);
+			/* drop the oldest event */
+			entry = list_first_entry(&fh->events[ev_idx],
+						 struct cec_event_entry, list);
+			list_del(&entry->list);
+			kfree(entry);
+		}
+	}
+	/* Mark that events were lost */
+	entry = list_first_entry_or_null(&fh->events[ev_idx],
+					 struct cec_event_entry, list);
+	if (entry)
+		entry->ev.flags |= CEC_EVENT_FL_DROPPED_EVENTS;
+
+unlock:
+	mutex_unlock(&fh->lock);
+	wake_up_interruptible(&fh->wait);
+}
+
+/* Queue a new event for all open filehandles. */
+static void cec_queue_event(struct cec_adapter *adap,
+			    const struct cec_event *ev)
+{
+	u64 ts = ktime_get_ns();
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		cec_queue_event_fh(fh, ev, ts);
+	mutex_unlock(&adap->devnode.lock);
+}
+
+/* Notify userspace that the CEC pin changed state at the given time. */
+void cec_queue_pin_cec_event(struct cec_adapter *adap, bool is_high,
+			     bool dropped_events, ktime_t ts)
+{
+	struct cec_event ev = {
+		.event = is_high ? CEC_EVENT_PIN_CEC_HIGH :
+				   CEC_EVENT_PIN_CEC_LOW,
+		.flags = dropped_events ? CEC_EVENT_FL_DROPPED_EVENTS : 0,
+	};
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		if (fh->mode_follower == CEC_MODE_MONITOR_PIN)
+			cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
+	mutex_unlock(&adap->devnode.lock);
+}
+EXPORT_SYMBOL_GPL(cec_queue_pin_cec_event);
+
+/* Notify userspace that the HPD pin changed state at the given time. */
+void cec_queue_pin_hpd_event(struct cec_adapter *adap, bool is_high, ktime_t ts)
+{
+	struct cec_event ev = {
+		.event = is_high ? CEC_EVENT_PIN_HPD_HIGH :
+				   CEC_EVENT_PIN_HPD_LOW,
+	};
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
+	mutex_unlock(&adap->devnode.lock);
+}
+EXPORT_SYMBOL_GPL(cec_queue_pin_hpd_event);
+
+/* Notify userspace that the 5V pin changed state at the given time. */
+void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts)
+{
+	struct cec_event ev = {
+		.event = is_high ? CEC_EVENT_PIN_5V_HIGH :
+				   CEC_EVENT_PIN_5V_LOW,
+	};
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
+	mutex_unlock(&adap->devnode.lock);
+}
+EXPORT_SYMBOL_GPL(cec_queue_pin_5v_event);
+
+/*
+ * Queue a new message for this filehandle.
+ *
+ * We keep a queue of at most CEC_MAX_MSG_RX_QUEUE_SZ messages. If the
+ * queue becomes full, then drop the oldest message and keep track
+ * of how many messages we've dropped.
+ */
+static void cec_queue_msg_fh(struct cec_fh *fh, const struct cec_msg *msg)
+{
+	static const struct cec_event ev_lost_msgs = {
+		.event = CEC_EVENT_LOST_MSGS,
+		.flags = 0,
+		{
+			.lost_msgs = { 1 },
+		},
+	};
+	struct cec_msg_entry *entry;
+
+	mutex_lock(&fh->lock);
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (entry) {
+		entry->msg = *msg;
+		/* Add new msg at the end of the queue */
+		list_add_tail(&entry->list, &fh->msgs);
+
+		if (fh->queued_msgs < CEC_MAX_MSG_RX_QUEUE_SZ) {
+			/* All is fine if there is enough room */
+			fh->queued_msgs++;
+			mutex_unlock(&fh->lock);
+			wake_up_interruptible(&fh->wait);
+			return;
+		}
+
+		/*
+		 * if the message queue is full, then drop the oldest one and
+		 * send a lost message event.
+		 */
+		entry = list_first_entry(&fh->msgs, struct cec_msg_entry, list);
+		list_del(&entry->list);
+		kfree(entry);
+	}
+	mutex_unlock(&fh->lock);
+
+	/*
+	 * We lost a message, either because kmalloc failed or the queue
+	 * was full.
+	 */
+	cec_queue_event_fh(fh, &ev_lost_msgs, ktime_get_ns());
+}
+
+/*
+ * Queue the message for those filehandles that are in monitor mode.
+ * If valid_la is true (this message is for us or was sent by us),
+ * then pass it on to any monitoring filehandle. If this message
+ * isn't for us or from us, then only give it to filehandles that
+ * are in MONITOR_ALL mode.
+ *
+ * This can only happen if the CEC_CAP_MONITOR_ALL capability is
+ * set and the CEC adapter was placed in 'monitor all' mode.
+ */
+static void cec_queue_msg_monitor(struct cec_adapter *adap,
+				  const struct cec_msg *msg,
+				  bool valid_la)
+{
+	struct cec_fh *fh;
+	u32 monitor_mode = valid_la ? CEC_MODE_MONITOR :
+				      CEC_MODE_MONITOR_ALL;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list) {
+		if (fh->mode_follower >= monitor_mode)
+			cec_queue_msg_fh(fh, msg);
+	}
+	mutex_unlock(&adap->devnode.lock);
+}
+
+/*
+ * Queue the message for follower filehandles.
+ */
+static void cec_queue_msg_followers(struct cec_adapter *adap,
+				    const struct cec_msg *msg)
+{
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list) {
+		if (fh->mode_follower == CEC_MODE_FOLLOWER)
+			cec_queue_msg_fh(fh, msg);
+	}
+	mutex_unlock(&adap->devnode.lock);
+}
+
+/* Notify userspace of an adapter state change. */
+static void cec_post_state_event(struct cec_adapter *adap)
+{
+	struct cec_event ev = {
+		.event = CEC_EVENT_STATE_CHANGE,
+	};
+
+	ev.state_change.phys_addr = adap->phys_addr;
+	ev.state_change.log_addr_mask = adap->log_addrs.log_addr_mask;
+	ev.state_change.have_conn_info =
+		adap->conn_info.type != CEC_CONNECTOR_TYPE_NO_CONNECTOR;
+	cec_queue_event(adap, &ev);
+}
+
+/*
+ * A CEC transmit (and a possible wait for reply) completed.
+ * If this was in blocking mode, then complete it, otherwise
+ * queue the message for userspace to dequeue later.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_data_completed(struct cec_data *data)
+{
+	/*
+	 * Delete this transmit from the filehandle's xfer_list since
+	 * we're done with it.
+	 *
+	 * Note that if the filehandle is closed before this transmit
+	 * finished, then the release() function will set data->fh to NULL.
+	 * Without that we would be referring to a closed filehandle.
+	 */
+	if (data->fh)
+		list_del(&data->xfer_list);
+
+	if (data->blocking) {
+		/*
+		 * Someone is blocking so mark the message as completed
+		 * and call complete.
+		 */
+		data->completed = true;
+		complete(&data->c);
+	} else {
+		/*
+		 * No blocking, so just queue the message if needed and
+		 * free the memory.
+		 */
+		if (data->fh)
+			cec_queue_msg_fh(data->fh, &data->msg);
+		kfree(data);
+	}
+}
+
+/*
+ * A pending CEC transmit needs to be cancelled, either because the CEC
+ * adapter is disabled or the transmit takes an impossibly long time to
+ * finish.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_data_cancel(struct cec_data *data, u8 tx_status)
+{
+	/*
+	 * It's either the current transmit, or it is a pending
+	 * transmit. Take the appropriate action to clear it.
+	 */
+	if (data->adap->transmitting == data) {
+		data->adap->transmitting = NULL;
+	} else {
+		list_del_init(&data->list);
+		if (!(data->msg.tx_status & CEC_TX_STATUS_OK))
+			if (!WARN_ON(!data->adap->transmit_queue_sz))
+				data->adap->transmit_queue_sz--;
+	}
+
+	if (data->msg.tx_status & CEC_TX_STATUS_OK) {
+		data->msg.rx_ts = ktime_get_ns();
+		data->msg.rx_status = CEC_RX_STATUS_ABORTED;
+	} else {
+		data->msg.tx_ts = ktime_get_ns();
+		data->msg.tx_status |= tx_status |
+				       CEC_TX_STATUS_MAX_RETRIES;
+		data->msg.tx_error_cnt++;
+		data->attempts = 0;
+	}
+
+	/* Queue transmitted message for monitoring purposes */
+	cec_queue_msg_monitor(data->adap, &data->msg, 1);
+
+	cec_data_completed(data);
+}
+
+/*
+ * Flush all pending transmits and cancel any pending timeout work.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_flush(struct cec_adapter *adap)
+{
+	struct cec_data *data, *n;
+
+	/*
+	 * If the adapter is disabled, or we're asked to stop,
+	 * then cancel any pending transmits.
+	 */
+	while (!list_empty(&adap->transmit_queue)) {
+		data = list_first_entry(&adap->transmit_queue,
+					struct cec_data, list);
+		cec_data_cancel(data, CEC_TX_STATUS_ABORTED);
+	}
+	if (adap->transmitting)
+		cec_data_cancel(adap->transmitting, CEC_TX_STATUS_ABORTED);
+
+	/* Cancel the pending timeout work. */
+	list_for_each_entry_safe(data, n, &adap->wait_queue, list) {
+		if (cancel_delayed_work(&data->work))
+			cec_data_cancel(data, CEC_TX_STATUS_OK);
+		/*
+		 * If cancel_delayed_work returned false, then
+		 * the cec_wait_timeout function is running,
+		 * which will call cec_data_completed. So no
+		 * need to do anything special in that case.
+		 */
+	}
+	/*
+	 * If something went wrong and this counter isn't what it should
+	 * be, then this will reset it back to 0. Warn if it is not 0,
+	 * since it indicates a bug, either in this framework or in a
+	 * CEC driver.
+	 */
+	if (WARN_ON(adap->transmit_queue_sz))
+		adap->transmit_queue_sz = 0;
+}
+
+/*
+ * Main CEC state machine
+ *
+ * Wait until the thread should be stopped, or we are not transmitting and
+ * a new transmit message is queued up, in which case we start transmitting
+ * that message. When the adapter finished transmitting the message it will
+ * call cec_transmit_done().
+ *
+ * If the adapter is disabled, then remove all queued messages instead.
+ *
+ * If the current transmit times out, then cancel that transmit.
+ */
+int cec_thread_func(void *_adap)
+{
+	struct cec_adapter *adap = _adap;
+
+	for (;;) {
+		unsigned int signal_free_time;
+		struct cec_data *data;
+		bool timeout = false;
+		u8 attempts;
+
+		if (adap->transmit_in_progress) {
+			int err;
+
+			/*
+			 * We are transmitting a message, so add a timeout
+			 * to prevent the state machine to get stuck waiting
+			 * for this message to finalize and add a check to
+			 * see if the adapter is disabled in which case the
+			 * transmit should be canceled.
+			 */
+			err = wait_event_interruptible_timeout(adap->kthread_waitq,
+				(adap->needs_hpd &&
+				 (!adap->is_configured && !adap->is_configuring)) ||
+				kthread_should_stop() ||
+				(!adap->transmit_in_progress &&
+				 !list_empty(&adap->transmit_queue)),
+				msecs_to_jiffies(CEC_XFER_TIMEOUT_MS));
+			timeout = err == 0;
+		} else {
+			/* Otherwise we just wait for something to happen. */
+			wait_event_interruptible(adap->kthread_waitq,
+				kthread_should_stop() ||
+				(!adap->transmit_in_progress &&
+				 !list_empty(&adap->transmit_queue)));
+		}
+
+		mutex_lock(&adap->lock);
+
+		if ((adap->needs_hpd &&
+		     (!adap->is_configured && !adap->is_configuring)) ||
+		    kthread_should_stop()) {
+			cec_flush(adap);
+			goto unlock;
+		}
+
+		if (adap->transmit_in_progress && timeout) {
+			/*
+			 * If we timeout, then log that. Normally this does
+			 * not happen and it is an indication of a faulty CEC
+			 * adapter driver, or the CEC bus is in some weird
+			 * state. On rare occasions it can happen if there is
+			 * so much traffic on the bus that the adapter was
+			 * unable to transmit for CEC_XFER_TIMEOUT_MS (2.1s).
+			 */
+			if (adap->transmitting) {
+				pr_warn("cec-%s: message %*ph timed out\n", adap->name,
+					adap->transmitting->msg.len,
+					adap->transmitting->msg.msg);
+				/* Just give up on this. */
+				cec_data_cancel(adap->transmitting,
+						CEC_TX_STATUS_TIMEOUT);
+			} else {
+				pr_warn("cec-%s: transmit timed out\n", adap->name);
+			}
+			adap->transmit_in_progress = false;
+			adap->tx_timeouts++;
+			goto unlock;
+		}
+
+		/*
+		 * If we are still transmitting, or there is nothing new to
+		 * transmit, then just continue waiting.
+		 */
+		if (adap->transmit_in_progress || list_empty(&adap->transmit_queue))
+			goto unlock;
+
+		/* Get a new message to transmit */
+		data = list_first_entry(&adap->transmit_queue,
+					struct cec_data, list);
+		list_del_init(&data->list);
+		if (!WARN_ON(!data->adap->transmit_queue_sz))
+			adap->transmit_queue_sz--;
+
+		/* Make this the current transmitting message */
+		adap->transmitting = data;
+
+		/*
+		 * Suggested number of attempts as per the CEC 2.0 spec:
+		 * 4 attempts is the default, except for 'secondary poll
+		 * messages', i.e. poll messages not sent during the adapter
+		 * configuration phase when it allocates logical addresses.
+		 */
+		if (data->msg.len == 1 && adap->is_configured)
+			attempts = 2;
+		else
+			attempts = 4;
+
+		/* Set the suggested signal free time */
+		if (data->attempts) {
+			/* should be >= 3 data bit periods for a retry */
+			signal_free_time = CEC_SIGNAL_FREE_TIME_RETRY;
+		} else if (adap->last_initiator !=
+			   cec_msg_initiator(&data->msg)) {
+			/* should be >= 5 data bit periods for new initiator */
+			signal_free_time = CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
+			adap->last_initiator = cec_msg_initiator(&data->msg);
+		} else {
+			/*
+			 * should be >= 7 data bit periods for sending another
+			 * frame immediately after another.
+			 */
+			signal_free_time = CEC_SIGNAL_FREE_TIME_NEXT_XFER;
+		}
+		if (data->attempts == 0)
+			data->attempts = attempts;
+
+		/* Tell the adapter to transmit, cancel on error */
+		if (adap->ops->adap_transmit(adap, data->attempts,
+					     signal_free_time, &data->msg))
+			cec_data_cancel(data, CEC_TX_STATUS_ABORTED);
+		else
+			adap->transmit_in_progress = true;
+
+unlock:
+		mutex_unlock(&adap->lock);
+
+		if (kthread_should_stop())
+			break;
+	}
+	return 0;
+}
+
+/*
+ * Called by the CEC adapter if a transmit finished.
+ */
+void cec_transmit_done_ts(struct cec_adapter *adap, u8 status,
+			  u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt,
+			  u8 error_cnt, ktime_t ts)
+{
+	struct cec_data *data;
+	struct cec_msg *msg;
+	unsigned int attempts_made = arb_lost_cnt + nack_cnt +
+				     low_drive_cnt + error_cnt;
+
+	dprintk(2, "%s: status 0x%02x\n", __func__, status);
+	if (attempts_made < 1)
+		attempts_made = 1;
+
+	mutex_lock(&adap->lock);
+	data = adap->transmitting;
+	if (!data) {
+		/*
+		 * This might happen if a transmit was issued and the cable is
+		 * unplugged while the transmit is ongoing. Ignore this
+		 * transmit in that case.
+		 */
+		if (!adap->transmit_in_progress)
+			dprintk(1, "%s was called without an ongoing transmit!\n",
+				__func__);
+		adap->transmit_in_progress = false;
+		goto wake_thread;
+	}
+	adap->transmit_in_progress = false;
+
+	msg = &data->msg;
+
+	/* Drivers must fill in the status! */
+	WARN_ON(status == 0);
+	msg->tx_ts = ktime_to_ns(ts);
+	msg->tx_status |= status;
+	msg->tx_arb_lost_cnt += arb_lost_cnt;
+	msg->tx_nack_cnt += nack_cnt;
+	msg->tx_low_drive_cnt += low_drive_cnt;
+	msg->tx_error_cnt += error_cnt;
+
+	/* Mark that we're done with this transmit */
+	adap->transmitting = NULL;
+
+	/*
+	 * If there are still retry attempts left and there was an error and
+	 * the hardware didn't signal that it retried itself (by setting
+	 * CEC_TX_STATUS_MAX_RETRIES), then we will retry ourselves.
+	 */
+	if (data->attempts > attempts_made &&
+	    !(status & (CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_OK))) {
+		/* Retry this message */
+		data->attempts -= attempts_made;
+		if (msg->timeout)
+			dprintk(2, "retransmit: %*ph (attempts: %d, wait for 0x%02x)\n",
+				msg->len, msg->msg, data->attempts, msg->reply);
+		else
+			dprintk(2, "retransmit: %*ph (attempts: %d)\n",
+				msg->len, msg->msg, data->attempts);
+		/* Add the message in front of the transmit queue */
+		list_add(&data->list, &adap->transmit_queue);
+		adap->transmit_queue_sz++;
+		goto wake_thread;
+	}
+
+	data->attempts = 0;
+
+	/* Always set CEC_TX_STATUS_MAX_RETRIES on error */
+	if (!(status & CEC_TX_STATUS_OK))
+		msg->tx_status |= CEC_TX_STATUS_MAX_RETRIES;
+
+	/* Queue transmitted message for monitoring purposes */
+	cec_queue_msg_monitor(adap, msg, 1);
+
+	if ((status & CEC_TX_STATUS_OK) && adap->is_configured &&
+	    msg->timeout) {
+		/*
+		 * Queue the message into the wait queue if we want to wait
+		 * for a reply.
+		 */
+		list_add_tail(&data->list, &adap->wait_queue);
+		schedule_delayed_work(&data->work,
+				      msecs_to_jiffies(msg->timeout));
+	} else {
+		/* Otherwise we're done */
+		cec_data_completed(data);
+	}
+
+wake_thread:
+	/*
+	 * Wake up the main thread to see if another message is ready
+	 * for transmitting or to retry the current message.
+	 */
+	wake_up_interruptible(&adap->kthread_waitq);
+	mutex_unlock(&adap->lock);
+}
+EXPORT_SYMBOL_GPL(cec_transmit_done_ts);
+
+void cec_transmit_attempt_done_ts(struct cec_adapter *adap,
+				  u8 status, ktime_t ts)
+{
+	switch (status & ~CEC_TX_STATUS_MAX_RETRIES) {
+	case CEC_TX_STATUS_OK:
+		cec_transmit_done_ts(adap, status, 0, 0, 0, 0, ts);
+		return;
+	case CEC_TX_STATUS_ARB_LOST:
+		cec_transmit_done_ts(adap, status, 1, 0, 0, 0, ts);
+		return;
+	case CEC_TX_STATUS_NACK:
+		cec_transmit_done_ts(adap, status, 0, 1, 0, 0, ts);
+		return;
+	case CEC_TX_STATUS_LOW_DRIVE:
+		cec_transmit_done_ts(adap, status, 0, 0, 1, 0, ts);
+		return;
+	case CEC_TX_STATUS_ERROR:
+		cec_transmit_done_ts(adap, status, 0, 0, 0, 1, ts);
+		return;
+	default:
+		/* Should never happen */
+		WARN(1, "cec-%s: invalid status 0x%02x\n", adap->name, status);
+		return;
+	}
+}
+EXPORT_SYMBOL_GPL(cec_transmit_attempt_done_ts);
+
+/*
+ * Called when waiting for a reply times out.
+ */
+static void cec_wait_timeout(struct work_struct *work)
+{
+	struct cec_data *data = container_of(work, struct cec_data, work.work);
+	struct cec_adapter *adap = data->adap;
+
+	mutex_lock(&adap->lock);
+	/*
+	 * Sanity check in case the timeout and the arrival of the message
+	 * happened at the same time.
+	 */
+	if (list_empty(&data->list))
+		goto unlock;
+
+	/* Mark the message as timed out */
+	list_del_init(&data->list);
+	data->msg.rx_ts = ktime_get_ns();
+	data->msg.rx_status = CEC_RX_STATUS_TIMEOUT;
+	cec_data_completed(data);
+unlock:
+	mutex_unlock(&adap->lock);
+}
+
+/*
+ * Transmit a message. The fh argument may be NULL if the transmit is not
+ * associated with a specific filehandle.
+ *
+ * This function is called with adap->lock held.
+ */
+int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg,
+			struct cec_fh *fh, bool block)
+{
+	struct cec_data *data;
+	bool is_raw = msg_is_raw(msg);
+
+	msg->rx_ts = 0;
+	msg->tx_ts = 0;
+	msg->rx_status = 0;
+	msg->tx_status = 0;
+	msg->tx_arb_lost_cnt = 0;
+	msg->tx_nack_cnt = 0;
+	msg->tx_low_drive_cnt = 0;
+	msg->tx_error_cnt = 0;
+	msg->sequence = 0;
+
+	if (msg->reply && msg->timeout == 0) {
+		/* Make sure the timeout isn't 0. */
+		msg->timeout = 1000;
+	}
+	msg->flags &= CEC_MSG_FL_REPLY_TO_FOLLOWERS | CEC_MSG_FL_RAW;
+
+	if (!msg->timeout)
+		msg->flags &= ~CEC_MSG_FL_REPLY_TO_FOLLOWERS;
+
+	/* Sanity checks */
+	if (msg->len == 0 || msg->len > CEC_MAX_MSG_SIZE) {
+		dprintk(1, "%s: invalid length %d\n", __func__, msg->len);
+		return -EINVAL;
+	}
+
+	memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
+
+	if (msg->timeout)
+		dprintk(2, "%s: %*ph (wait for 0x%02x%s)\n",
+			__func__, msg->len, msg->msg, msg->reply,
+			!block ? ", nb" : "");
+	else
+		dprintk(2, "%s: %*ph%s\n",
+			__func__, msg->len, msg->msg, !block ? " (nb)" : "");
+
+	if (msg->timeout && msg->len == 1) {
+		dprintk(1, "%s: can't reply to poll msg\n", __func__);
+		return -EINVAL;
+	}
+
+	if (is_raw) {
+		if (!capable(CAP_SYS_RAWIO))
+			return -EPERM;
+	} else {
+		/* A CDC-Only device can only send CDC messages */
+		if ((adap->log_addrs.flags & CEC_LOG_ADDRS_FL_CDC_ONLY) &&
+		    (msg->len == 1 || msg->msg[1] != CEC_MSG_CDC_MESSAGE)) {
+			dprintk(1, "%s: not a CDC message\n", __func__);
+			return -EINVAL;
+		}
+
+		if (msg->len >= 4 && msg->msg[1] == CEC_MSG_CDC_MESSAGE) {
+			msg->msg[2] = adap->phys_addr >> 8;
+			msg->msg[3] = adap->phys_addr & 0xff;
+		}
+
+		if (msg->len == 1) {
+			if (cec_msg_destination(msg) == 0xf) {
+				dprintk(1, "%s: invalid poll message\n",
+					__func__);
+				return -EINVAL;
+			}
+			if (cec_has_log_addr(adap, cec_msg_destination(msg))) {
+				/*
+				 * If the destination is a logical address our
+				 * adapter has already claimed, then just NACK
+				 * this. It depends on the hardware what it will
+				 * do with a POLL to itself (some OK this), so
+				 * it is just as easy to handle it here so the
+				 * behavior will be consistent.
+				 */
+				msg->tx_ts = ktime_get_ns();
+				msg->tx_status = CEC_TX_STATUS_NACK |
+					CEC_TX_STATUS_MAX_RETRIES;
+				msg->tx_nack_cnt = 1;
+				msg->sequence = ++adap->sequence;
+				if (!msg->sequence)
+					msg->sequence = ++adap->sequence;
+				return 0;
+			}
+		}
+		if (msg->len > 1 && !cec_msg_is_broadcast(msg) &&
+		    cec_has_log_addr(adap, cec_msg_destination(msg))) {
+			dprintk(1, "%s: destination is the adapter itself\n",
+				__func__);
+			return -EINVAL;
+		}
+		if (msg->len > 1 && adap->is_configured &&
+		    !cec_has_log_addr(adap, cec_msg_initiator(msg))) {
+			dprintk(1, "%s: initiator has unknown logical address %d\n",
+				__func__, cec_msg_initiator(msg));
+			return -EINVAL;
+		}
+		/*
+		 * Special case: allow Ping and IMAGE/TEXT_VIEW_ON to be
+		 * transmitted to a TV, even if the adapter is unconfigured.
+		 * This makes it possible to detect or wake up displays that
+		 * pull down the HPD when in standby.
+		 */
+		if (!adap->is_configured && !adap->is_configuring &&
+		    (msg->len > 2 ||
+		     cec_msg_destination(msg) != CEC_LOG_ADDR_TV ||
+		     (msg->len == 2 && msg->msg[1] != CEC_MSG_IMAGE_VIEW_ON &&
+		      msg->msg[1] != CEC_MSG_TEXT_VIEW_ON))) {
+			dprintk(1, "%s: adapter is unconfigured\n", __func__);
+			return -ENONET;
+		}
+	}
+
+	if (!adap->is_configured && !adap->is_configuring) {
+		if (adap->needs_hpd) {
+			dprintk(1, "%s: adapter is unconfigured and needs HPD\n",
+				__func__);
+			return -ENONET;
+		}
+		if (msg->reply) {
+			dprintk(1, "%s: invalid msg->reply\n", __func__);
+			return -EINVAL;
+		}
+	}
+
+	if (adap->transmit_queue_sz >= CEC_MAX_MSG_TX_QUEUE_SZ) {
+		dprintk(2, "%s: transmit queue full\n", __func__);
+		return -EBUSY;
+	}
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	msg->sequence = ++adap->sequence;
+	if (!msg->sequence)
+		msg->sequence = ++adap->sequence;
+
+	data->msg = *msg;
+	data->fh = fh;
+	data->adap = adap;
+	data->blocking = block;
+
+	init_completion(&data->c);
+	INIT_DELAYED_WORK(&data->work, cec_wait_timeout);
+
+	if (fh)
+		list_add_tail(&data->xfer_list, &fh->xfer_list);
+
+	list_add_tail(&data->list, &adap->transmit_queue);
+	adap->transmit_queue_sz++;
+	if (!adap->transmitting)
+		wake_up_interruptible(&adap->kthread_waitq);
+
+	/* All done if we don't need to block waiting for completion */
+	if (!block)
+		return 0;
+
+	/*
+	 * Release the lock and wait, retake the lock afterwards.
+	 */
+	mutex_unlock(&adap->lock);
+	wait_for_completion_killable(&data->c);
+	if (!data->completed)
+		cancel_delayed_work_sync(&data->work);
+	mutex_lock(&adap->lock);
+
+	/* Cancel the transmit if it was interrupted */
+	if (!data->completed)
+		cec_data_cancel(data, CEC_TX_STATUS_ABORTED);
+
+	/* The transmit completed (possibly with an error) */
+	*msg = data->msg;
+	kfree(data);
+	return 0;
+}
+
+/* Helper function to be used by drivers and this framework. */
+int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
+		     bool block)
+{
+	int ret;
+
+	mutex_lock(&adap->lock);
+	ret = cec_transmit_msg_fh(adap, msg, NULL, block);
+	mutex_unlock(&adap->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cec_transmit_msg);
+
+/*
+ * I don't like forward references but without this the low-level
+ * cec_received_msg() function would come after a bunch of high-level
+ * CEC protocol handling functions. That was very confusing.
+ */
+static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
+			      bool is_reply);
+
+#define DIRECTED	0x80
+#define BCAST1_4	0x40
+#define BCAST2_0	0x20	/* broadcast only allowed for >= 2.0 */
+#define BCAST		(BCAST1_4 | BCAST2_0)
+#define BOTH		(BCAST | DIRECTED)
+
+/*
+ * Specify minimum length and whether the message is directed, broadcast
+ * or both. Messages that do not match the criteria are ignored as per
+ * the CEC specification.
+ */
+static const u8 cec_msg_size[256] = {
+	[CEC_MSG_ACTIVE_SOURCE] = 4 | BCAST,
+	[CEC_MSG_IMAGE_VIEW_ON] = 2 | DIRECTED,
+	[CEC_MSG_TEXT_VIEW_ON] = 2 | DIRECTED,
+	[CEC_MSG_INACTIVE_SOURCE] = 4 | DIRECTED,
+	[CEC_MSG_REQUEST_ACTIVE_SOURCE] = 2 | BCAST,
+	[CEC_MSG_ROUTING_CHANGE] = 6 | BCAST,
+	[CEC_MSG_ROUTING_INFORMATION] = 4 | BCAST,
+	[CEC_MSG_SET_STREAM_PATH] = 4 | BCAST,
+	[CEC_MSG_STANDBY] = 2 | BOTH,
+	[CEC_MSG_RECORD_OFF] = 2 | DIRECTED,
+	[CEC_MSG_RECORD_ON] = 3 | DIRECTED,
+	[CEC_MSG_RECORD_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_RECORD_TV_SCREEN] = 2 | DIRECTED,
+	[CEC_MSG_CLEAR_ANALOGUE_TIMER] = 13 | DIRECTED,
+	[CEC_MSG_CLEAR_DIGITAL_TIMER] = 16 | DIRECTED,
+	[CEC_MSG_CLEAR_EXT_TIMER] = 13 | DIRECTED,
+	[CEC_MSG_SET_ANALOGUE_TIMER] = 13 | DIRECTED,
+	[CEC_MSG_SET_DIGITAL_TIMER] = 16 | DIRECTED,
+	[CEC_MSG_SET_EXT_TIMER] = 13 | DIRECTED,
+	[CEC_MSG_SET_TIMER_PROGRAM_TITLE] = 2 | DIRECTED,
+	[CEC_MSG_TIMER_CLEARED_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_TIMER_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_CEC_VERSION] = 3 | DIRECTED,
+	[CEC_MSG_GET_CEC_VERSION] = 2 | DIRECTED,
+	[CEC_MSG_GIVE_PHYSICAL_ADDR] = 2 | DIRECTED,
+	[CEC_MSG_GET_MENU_LANGUAGE] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_PHYSICAL_ADDR] = 5 | BCAST,
+	[CEC_MSG_SET_MENU_LANGUAGE] = 5 | BCAST,
+	[CEC_MSG_REPORT_FEATURES] = 6 | BCAST,
+	[CEC_MSG_GIVE_FEATURES] = 2 | DIRECTED,
+	[CEC_MSG_DECK_CONTROL] = 3 | DIRECTED,
+	[CEC_MSG_DECK_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_GIVE_DECK_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_PLAY] = 3 | DIRECTED,
+	[CEC_MSG_GIVE_TUNER_DEVICE_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_SELECT_ANALOGUE_SERVICE] = 6 | DIRECTED,
+	[CEC_MSG_SELECT_DIGITAL_SERVICE] = 9 | DIRECTED,
+	[CEC_MSG_TUNER_DEVICE_STATUS] = 7 | DIRECTED,
+	[CEC_MSG_TUNER_STEP_DECREMENT] = 2 | DIRECTED,
+	[CEC_MSG_TUNER_STEP_INCREMENT] = 2 | DIRECTED,
+	[CEC_MSG_DEVICE_VENDOR_ID] = 5 | BCAST,
+	[CEC_MSG_GIVE_DEVICE_VENDOR_ID] = 2 | DIRECTED,
+	[CEC_MSG_VENDOR_COMMAND] = 2 | DIRECTED,
+	[CEC_MSG_VENDOR_COMMAND_WITH_ID] = 5 | BOTH,
+	[CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN] = 2 | BOTH,
+	[CEC_MSG_VENDOR_REMOTE_BUTTON_UP] = 2 | BOTH,
+	[CEC_MSG_SET_OSD_STRING] = 3 | DIRECTED,
+	[CEC_MSG_GIVE_OSD_NAME] = 2 | DIRECTED,
+	[CEC_MSG_SET_OSD_NAME] = 2 | DIRECTED,
+	[CEC_MSG_MENU_REQUEST] = 3 | DIRECTED,
+	[CEC_MSG_MENU_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_USER_CONTROL_PRESSED] = 3 | DIRECTED,
+	[CEC_MSG_USER_CONTROL_RELEASED] = 2 | DIRECTED,
+	[CEC_MSG_GIVE_DEVICE_POWER_STATUS] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_POWER_STATUS] = 3 | DIRECTED | BCAST2_0,
+	[CEC_MSG_FEATURE_ABORT] = 4 | DIRECTED,
+	[CEC_MSG_ABORT] = 2 | DIRECTED,
+	[CEC_MSG_GIVE_AUDIO_STATUS] = 2 | DIRECTED,
+	[CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_AUDIO_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED,
+	[CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED,
+	[CEC_MSG_SET_SYSTEM_AUDIO_MODE] = 3 | BOTH,
+	[CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST] = 2 | DIRECTED,
+	[CEC_MSG_SYSTEM_AUDIO_MODE_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_SET_AUDIO_RATE] = 3 | DIRECTED,
+	[CEC_MSG_INITIATE_ARC] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_ARC_INITIATED] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_ARC_TERMINATED] = 2 | DIRECTED,
+	[CEC_MSG_REQUEST_ARC_INITIATION] = 2 | DIRECTED,
+	[CEC_MSG_REQUEST_ARC_TERMINATION] = 2 | DIRECTED,
+	[CEC_MSG_TERMINATE_ARC] = 2 | DIRECTED,
+	[CEC_MSG_REQUEST_CURRENT_LATENCY] = 4 | BCAST,
+	[CEC_MSG_REPORT_CURRENT_LATENCY] = 6 | BCAST,
+	[CEC_MSG_CDC_MESSAGE] = 2 | BCAST,
+};
+
+/* Called by the CEC adapter if a message is received */
+void cec_received_msg_ts(struct cec_adapter *adap,
+			 struct cec_msg *msg, ktime_t ts)
+{
+	struct cec_data *data;
+	u8 msg_init = cec_msg_initiator(msg);
+	u8 msg_dest = cec_msg_destination(msg);
+	u8 cmd = msg->msg[1];
+	bool is_reply = false;
+	bool valid_la = true;
+	u8 min_len = 0;
+
+	if (WARN_ON(!msg->len || msg->len > CEC_MAX_MSG_SIZE))
+		return;
+
+	/*
+	 * Some CEC adapters will receive the messages that they transmitted.
+	 * This test filters out those messages by checking if we are the
+	 * initiator, and just returning in that case.
+	 *
+	 * Note that this won't work if this is an Unregistered device.
+	 *
+	 * It is bad practice if the hardware receives the message that it
+	 * transmitted and luckily most CEC adapters behave correctly in this
+	 * respect.
+	 */
+	if (msg_init != CEC_LOG_ADDR_UNREGISTERED &&
+	    cec_has_log_addr(adap, msg_init))
+		return;
+
+	msg->rx_ts = ktime_to_ns(ts);
+	msg->rx_status = CEC_RX_STATUS_OK;
+	msg->sequence = msg->reply = msg->timeout = 0;
+	msg->tx_status = 0;
+	msg->tx_ts = 0;
+	msg->tx_arb_lost_cnt = 0;
+	msg->tx_nack_cnt = 0;
+	msg->tx_low_drive_cnt = 0;
+	msg->tx_error_cnt = 0;
+	msg->flags = 0;
+	memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
+
+	mutex_lock(&adap->lock);
+	dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
+
+	adap->last_initiator = 0xff;
+
+	/* Check if this message was for us (directed or broadcast). */
+	if (!cec_msg_is_broadcast(msg))
+		valid_la = cec_has_log_addr(adap, msg_dest);
+
+	/*
+	 * Check if the length is not too short or if the message is a
+	 * broadcast message where a directed message was expected or
+	 * vice versa. If so, then the message has to be ignored (according
+	 * to section CEC 7.3 and CEC 12.2).
+	 */
+	if (valid_la && msg->len > 1 && cec_msg_size[cmd]) {
+		u8 dir_fl = cec_msg_size[cmd] & BOTH;
+
+		min_len = cec_msg_size[cmd] & 0x1f;
+		if (msg->len < min_len)
+			valid_la = false;
+		else if (!cec_msg_is_broadcast(msg) && !(dir_fl & DIRECTED))
+			valid_la = false;
+		else if (cec_msg_is_broadcast(msg) && !(dir_fl & BCAST))
+			valid_la = false;
+		else if (cec_msg_is_broadcast(msg) &&
+			 adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0 &&
+			 !(dir_fl & BCAST1_4))
+			valid_la = false;
+	}
+	if (valid_la && min_len) {
+		/* These messages have special length requirements */
+		switch (cmd) {
+		case CEC_MSG_TIMER_STATUS:
+			if (msg->msg[2] & 0x10) {
+				switch (msg->msg[2] & 0xf) {
+				case CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE:
+				case CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE:
+					if (msg->len < 5)
+						valid_la = false;
+					break;
+				}
+			} else if ((msg->msg[2] & 0xf) == CEC_OP_PROG_ERROR_DUPLICATE) {
+				if (msg->len < 5)
+					valid_la = false;
+			}
+			break;
+		case CEC_MSG_RECORD_ON:
+			switch (msg->msg[2]) {
+			case CEC_OP_RECORD_SRC_OWN:
+				break;
+			case CEC_OP_RECORD_SRC_DIGITAL:
+				if (msg->len < 10)
+					valid_la = false;
+				break;
+			case CEC_OP_RECORD_SRC_ANALOG:
+				if (msg->len < 7)
+					valid_la = false;
+				break;
+			case CEC_OP_RECORD_SRC_EXT_PLUG:
+				if (msg->len < 4)
+					valid_la = false;
+				break;
+			case CEC_OP_RECORD_SRC_EXT_PHYS_ADDR:
+				if (msg->len < 5)
+					valid_la = false;
+				break;
+			}
+			break;
+		}
+	}
+
+	/* It's a valid message and not a poll or CDC message */
+	if (valid_la && msg->len > 1 && cmd != CEC_MSG_CDC_MESSAGE) {
+		bool abort = cmd == CEC_MSG_FEATURE_ABORT;
+
+		/* The aborted command is in msg[2] */
+		if (abort)
+			cmd = msg->msg[2];
+
+		/*
+		 * Walk over all transmitted messages that are waiting for a
+		 * reply.
+		 */
+		list_for_each_entry(data, &adap->wait_queue, list) {
+			struct cec_msg *dst = &data->msg;
+
+			/*
+			 * The *only* CEC message that has two possible replies
+			 * is CEC_MSG_INITIATE_ARC.
+			 * In this case allow either of the two replies.
+			 */
+			if (!abort && dst->msg[1] == CEC_MSG_INITIATE_ARC &&
+			    (cmd == CEC_MSG_REPORT_ARC_INITIATED ||
+			     cmd == CEC_MSG_REPORT_ARC_TERMINATED) &&
+			    (dst->reply == CEC_MSG_REPORT_ARC_INITIATED ||
+			     dst->reply == CEC_MSG_REPORT_ARC_TERMINATED))
+				dst->reply = cmd;
+
+			/* Does the command match? */
+			if ((abort && cmd != dst->msg[1]) ||
+			    (!abort && cmd != dst->reply))
+				continue;
+
+			/* Does the addressing match? */
+			if (msg_init != cec_msg_destination(dst) &&
+			    !cec_msg_is_broadcast(dst))
+				continue;
+
+			/* We got a reply */
+			memcpy(dst->msg, msg->msg, msg->len);
+			dst->len = msg->len;
+			dst->rx_ts = msg->rx_ts;
+			dst->rx_status = msg->rx_status;
+			if (abort)
+				dst->rx_status |= CEC_RX_STATUS_FEATURE_ABORT;
+			msg->flags = dst->flags;
+			/* Remove it from the wait_queue */
+			list_del_init(&data->list);
+
+			/* Cancel the pending timeout work */
+			if (!cancel_delayed_work(&data->work)) {
+				mutex_unlock(&adap->lock);
+				flush_scheduled_work();
+				mutex_lock(&adap->lock);
+			}
+			/*
+			 * Mark this as a reply, provided someone is still
+			 * waiting for the answer.
+			 */
+			if (data->fh)
+				is_reply = true;
+			cec_data_completed(data);
+			break;
+		}
+	}
+	mutex_unlock(&adap->lock);
+
+	/* Pass the message on to any monitoring filehandles */
+	cec_queue_msg_monitor(adap, msg, valid_la);
+
+	/* We're done if it is not for us or a poll message */
+	if (!valid_la || msg->len <= 1)
+		return;
+
+	if (adap->log_addrs.log_addr_mask == 0)
+		return;
+
+	/*
+	 * Process the message on the protocol level. If is_reply is true,
+	 * then cec_receive_notify() won't pass on the reply to the listener(s)
+	 * since that was already done by cec_data_completed() above.
+	 */
+	cec_receive_notify(adap, msg, is_reply);
+}
+EXPORT_SYMBOL_GPL(cec_received_msg_ts);
+
+/* Logical Address Handling */
+
+/*
+ * Attempt to claim a specific logical address.
+ *
+ * This function is called with adap->lock held.
+ */
+static int cec_config_log_addr(struct cec_adapter *adap,
+			       unsigned int idx,
+			       unsigned int log_addr)
+{
+	struct cec_log_addrs *las = &adap->log_addrs;
+	struct cec_msg msg = { };
+	const unsigned int max_retries = 2;
+	unsigned int i;
+	int err;
+
+	if (cec_has_log_addr(adap, log_addr))
+		return 0;
+
+	/* Send poll message */
+	msg.len = 1;
+	msg.msg[0] = (log_addr << 4) | log_addr;
+
+	for (i = 0; i < max_retries; i++) {
+		err = cec_transmit_msg_fh(adap, &msg, NULL, true);
+
+		/*
+		 * While trying to poll the physical address was reset
+		 * and the adapter was unconfigured, so bail out.
+		 */
+		if (!adap->is_configuring)
+			return -EINTR;
+
+		if (err)
+			return err;
+
+		/*
+		 * The message was aborted due to a disconnect or
+		 * unconfigure, just bail out.
+		 */
+		if (msg.tx_status & CEC_TX_STATUS_ABORTED)
+			return -EINTR;
+		if (msg.tx_status & CEC_TX_STATUS_OK)
+			return 0;
+		if (msg.tx_status & CEC_TX_STATUS_NACK)
+			break;
+		/*
+		 * Retry up to max_retries times if the message was neither
+		 * OKed or NACKed. This can happen due to e.g. a Lost
+		 * Arbitration condition.
+		 */
+	}
+
+	/*
+	 * If we are unable to get an OK or a NACK after max_retries attempts
+	 * (and note that each attempt already consists of four polls), then
+	 * then we assume that something is really weird and that it is not a
+	 * good idea to try and claim this logical address.
+	 */
+	if (i == max_retries)
+		return 0;
+
+	/*
+	 * Message not acknowledged, so this logical
+	 * address is free to use.
+	 */
+	err = adap->ops->adap_log_addr(adap, log_addr);
+	if (err)
+		return err;
+
+	las->log_addr[idx] = log_addr;
+	las->log_addr_mask |= 1 << log_addr;
+	adap->phys_addrs[log_addr] = adap->phys_addr;
+	return 1;
+}
+
+/*
+ * Unconfigure the adapter: clear all logical addresses and send
+ * the state changed event.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_adap_unconfigure(struct cec_adapter *adap)
+{
+	if (!adap->needs_hpd ||
+	    adap->phys_addr != CEC_PHYS_ADDR_INVALID)
+		WARN_ON(adap->ops->adap_log_addr(adap, CEC_LOG_ADDR_INVALID));
+	adap->log_addrs.log_addr_mask = 0;
+	adap->is_configuring = false;
+	adap->is_configured = false;
+	memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs));
+	cec_flush(adap);
+	wake_up_interruptible(&adap->kthread_waitq);
+	cec_post_state_event(adap);
+}
+
+/*
+ * Attempt to claim the required logical addresses.
+ */
+static int cec_config_thread_func(void *arg)
+{
+	/* The various LAs for each type of device */
+	static const u8 tv_log_addrs[] = {
+		CEC_LOG_ADDR_TV, CEC_LOG_ADDR_SPECIFIC,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 record_log_addrs[] = {
+		CEC_LOG_ADDR_RECORD_1, CEC_LOG_ADDR_RECORD_2,
+		CEC_LOG_ADDR_RECORD_3,
+		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 tuner_log_addrs[] = {
+		CEC_LOG_ADDR_TUNER_1, CEC_LOG_ADDR_TUNER_2,
+		CEC_LOG_ADDR_TUNER_3, CEC_LOG_ADDR_TUNER_4,
+		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 playback_log_addrs[] = {
+		CEC_LOG_ADDR_PLAYBACK_1, CEC_LOG_ADDR_PLAYBACK_2,
+		CEC_LOG_ADDR_PLAYBACK_3,
+		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 audiosystem_log_addrs[] = {
+		CEC_LOG_ADDR_AUDIOSYSTEM,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 specific_use_log_addrs[] = {
+		CEC_LOG_ADDR_SPECIFIC,
+		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 *type2addrs[6] = {
+		[CEC_LOG_ADDR_TYPE_TV] = tv_log_addrs,
+		[CEC_LOG_ADDR_TYPE_RECORD] = record_log_addrs,
+		[CEC_LOG_ADDR_TYPE_TUNER] = tuner_log_addrs,
+		[CEC_LOG_ADDR_TYPE_PLAYBACK] = playback_log_addrs,
+		[CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = audiosystem_log_addrs,
+		[CEC_LOG_ADDR_TYPE_SPECIFIC] = specific_use_log_addrs,
+	};
+	static const u16 type2mask[] = {
+		[CEC_LOG_ADDR_TYPE_TV] = CEC_LOG_ADDR_MASK_TV,
+		[CEC_LOG_ADDR_TYPE_RECORD] = CEC_LOG_ADDR_MASK_RECORD,
+		[CEC_LOG_ADDR_TYPE_TUNER] = CEC_LOG_ADDR_MASK_TUNER,
+		[CEC_LOG_ADDR_TYPE_PLAYBACK] = CEC_LOG_ADDR_MASK_PLAYBACK,
+		[CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = CEC_LOG_ADDR_MASK_AUDIOSYSTEM,
+		[CEC_LOG_ADDR_TYPE_SPECIFIC] = CEC_LOG_ADDR_MASK_SPECIFIC,
+	};
+	struct cec_adapter *adap = arg;
+	struct cec_log_addrs *las = &adap->log_addrs;
+	int err;
+	int i, j;
+
+	mutex_lock(&adap->lock);
+	dprintk(1, "physical address: %x.%x.%x.%x, claim %d logical addresses\n",
+		cec_phys_addr_exp(adap->phys_addr), las->num_log_addrs);
+	las->log_addr_mask = 0;
+
+	if (las->log_addr_type[0] == CEC_LOG_ADDR_TYPE_UNREGISTERED)
+		goto configured;
+
+	for (i = 0; i < las->num_log_addrs; i++) {
+		unsigned int type = las->log_addr_type[i];
+		const u8 *la_list;
+		u8 last_la;
+
+		/*
+		 * The TV functionality can only map to physical address 0.
+		 * For any other address, try the Specific functionality
+		 * instead as per the spec.
+		 */
+		if (adap->phys_addr && type == CEC_LOG_ADDR_TYPE_TV)
+			type = CEC_LOG_ADDR_TYPE_SPECIFIC;
+
+		la_list = type2addrs[type];
+		last_la = las->log_addr[i];
+		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
+		if (last_la == CEC_LOG_ADDR_INVALID ||
+		    last_la == CEC_LOG_ADDR_UNREGISTERED ||
+		    !((1 << last_la) & type2mask[type]))
+			last_la = la_list[0];
+
+		err = cec_config_log_addr(adap, i, last_la);
+		if (err > 0) /* Reused last LA */
+			continue;
+
+		if (err < 0)
+			goto unconfigure;
+
+		for (j = 0; la_list[j] != CEC_LOG_ADDR_INVALID; j++) {
+			/* Tried this one already, skip it */
+			if (la_list[j] == last_la)
+				continue;
+			/* The backup addresses are CEC 2.0 specific */
+			if ((la_list[j] == CEC_LOG_ADDR_BACKUP_1 ||
+			     la_list[j] == CEC_LOG_ADDR_BACKUP_2) &&
+			    las->cec_version < CEC_OP_CEC_VERSION_2_0)
+				continue;
+
+			err = cec_config_log_addr(adap, i, la_list[j]);
+			if (err == 0) /* LA is in use */
+				continue;
+			if (err < 0)
+				goto unconfigure;
+			/* Done, claimed an LA */
+			break;
+		}
+
+		if (la_list[j] == CEC_LOG_ADDR_INVALID)
+			dprintk(1, "could not claim LA %d\n", i);
+	}
+
+	if (adap->log_addrs.log_addr_mask == 0 &&
+	    !(las->flags & CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK))
+		goto unconfigure;
+
+configured:
+	if (adap->log_addrs.log_addr_mask == 0) {
+		/* Fall back to unregistered */
+		las->log_addr[0] = CEC_LOG_ADDR_UNREGISTERED;
+		las->log_addr_mask = 1 << las->log_addr[0];
+		for (i = 1; i < las->num_log_addrs; i++)
+			las->log_addr[i] = CEC_LOG_ADDR_INVALID;
+	}
+	for (i = las->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++)
+		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
+	adap->is_configured = true;
+	adap->is_configuring = false;
+	cec_post_state_event(adap);
+
+	/*
+	 * Now post the Report Features and Report Physical Address broadcast
+	 * messages. Note that these are non-blocking transmits, meaning that
+	 * they are just queued up and once adap->lock is unlocked the main
+	 * thread will kick in and start transmitting these.
+	 *
+	 * If after this function is done (but before one or more of these
+	 * messages are actually transmitted) the CEC adapter is unconfigured,
+	 * then any remaining messages will be dropped by the main thread.
+	 */
+	for (i = 0; i < las->num_log_addrs; i++) {
+		struct cec_msg msg = {};
+
+		if (las->log_addr[i] == CEC_LOG_ADDR_INVALID ||
+		    (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY))
+			continue;
+
+		msg.msg[0] = (las->log_addr[i] << 4) | 0x0f;
+
+		/* Report Features must come first according to CEC 2.0 */
+		if (las->log_addr[i] != CEC_LOG_ADDR_UNREGISTERED &&
+		    adap->log_addrs.cec_version >= CEC_OP_CEC_VERSION_2_0) {
+			cec_fill_msg_report_features(adap, &msg, i);
+			cec_transmit_msg_fh(adap, &msg, NULL, false);
+		}
+
+		/* Report Physical Address */
+		cec_msg_report_physical_addr(&msg, adap->phys_addr,
+					     las->primary_device_type[i]);
+		dprintk(1, "config: la %d pa %x.%x.%x.%x\n",
+			las->log_addr[i],
+			cec_phys_addr_exp(adap->phys_addr));
+		cec_transmit_msg_fh(adap, &msg, NULL, false);
+
+		/* Report Vendor ID */
+		if (adap->log_addrs.vendor_id != CEC_VENDOR_ID_NONE) {
+			cec_msg_device_vendor_id(&msg,
+						 adap->log_addrs.vendor_id);
+			cec_transmit_msg_fh(adap, &msg, NULL, false);
+		}
+	}
+	adap->kthread_config = NULL;
+	complete(&adap->config_completion);
+	mutex_unlock(&adap->lock);
+	return 0;
+
+unconfigure:
+	for (i = 0; i < las->num_log_addrs; i++)
+		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
+	cec_adap_unconfigure(adap);
+	adap->kthread_config = NULL;
+	mutex_unlock(&adap->lock);
+	complete(&adap->config_completion);
+	return 0;
+}
+
+/*
+ * Called from either __cec_s_phys_addr or __cec_s_log_addrs to claim the
+ * logical addresses.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_claim_log_addrs(struct cec_adapter *adap, bool block)
+{
+	if (WARN_ON(adap->is_configuring || adap->is_configured))
+		return;
+
+	init_completion(&adap->config_completion);
+
+	/* Ready to kick off the thread */
+	adap->is_configuring = true;
+	adap->kthread_config = kthread_run(cec_config_thread_func, adap,
+					   "ceccfg-%s", adap->name);
+	if (IS_ERR(adap->kthread_config)) {
+		adap->kthread_config = NULL;
+	} else if (block) {
+		mutex_unlock(&adap->lock);
+		wait_for_completion(&adap->config_completion);
+		mutex_lock(&adap->lock);
+	}
+}
+
+/* Set a new physical address and send an event notifying userspace of this.
+ *
+ * This function is called with adap->lock held.
+ */
+void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
+{
+	if (phys_addr == adap->phys_addr)
+		return;
+	if (phys_addr != CEC_PHYS_ADDR_INVALID && adap->devnode.unregistered)
+		return;
+
+	dprintk(1, "new physical address %x.%x.%x.%x\n",
+		cec_phys_addr_exp(phys_addr));
+	if (phys_addr == CEC_PHYS_ADDR_INVALID ||
+	    adap->phys_addr != CEC_PHYS_ADDR_INVALID) {
+		adap->phys_addr = CEC_PHYS_ADDR_INVALID;
+		cec_post_state_event(adap);
+		cec_adap_unconfigure(adap);
+		/* Disabling monitor all mode should always succeed */
+		if (adap->monitor_all_cnt)
+			WARN_ON(call_op(adap, adap_monitor_all_enable, false));
+		mutex_lock(&adap->devnode.lock);
+		if (adap->needs_hpd || list_empty(&adap->devnode.fhs)) {
+			WARN_ON(adap->ops->adap_enable(adap, false));
+			adap->transmit_in_progress = false;
+			wake_up_interruptible(&adap->kthread_waitq);
+		}
+		mutex_unlock(&adap->devnode.lock);
+		if (phys_addr == CEC_PHYS_ADDR_INVALID)
+			return;
+	}
+
+	mutex_lock(&adap->devnode.lock);
+	adap->last_initiator = 0xff;
+	adap->transmit_in_progress = false;
+
+	if ((adap->needs_hpd || list_empty(&adap->devnode.fhs)) &&
+	    adap->ops->adap_enable(adap, true)) {
+		mutex_unlock(&adap->devnode.lock);
+		return;
+	}
+
+	if (adap->monitor_all_cnt &&
+	    call_op(adap, adap_monitor_all_enable, true)) {
+		if (adap->needs_hpd || list_empty(&adap->devnode.fhs))
+			WARN_ON(adap->ops->adap_enable(adap, false));
+		mutex_unlock(&adap->devnode.lock);
+		return;
+	}
+	mutex_unlock(&adap->devnode.lock);
+
+	adap->phys_addr = phys_addr;
+	cec_post_state_event(adap);
+	if (adap->log_addrs.num_log_addrs)
+		cec_claim_log_addrs(adap, block);
+}
+
+void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
+{
+	if (IS_ERR_OR_NULL(adap))
+		return;
+
+	mutex_lock(&adap->lock);
+	__cec_s_phys_addr(adap, phys_addr, block);
+	mutex_unlock(&adap->lock);
+}
+EXPORT_SYMBOL_GPL(cec_s_phys_addr);
+
+void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
+			       const struct edid *edid)
+{
+	u16 pa = CEC_PHYS_ADDR_INVALID;
+
+	if (edid && edid->extensions)
+		pa = cec_get_edid_phys_addr((const u8 *)edid,
+				EDID_LENGTH * (edid->extensions + 1), NULL);
+	cec_s_phys_addr(adap, pa, false);
+}
+EXPORT_SYMBOL_GPL(cec_s_phys_addr_from_edid);
+
+void cec_s_conn_info(struct cec_adapter *adap,
+		     const struct cec_connector_info *conn_info)
+{
+	if (IS_ERR_OR_NULL(adap))
+		return;
+
+	if (!(adap->capabilities & CEC_CAP_CONNECTOR_INFO))
+		return;
+
+	mutex_lock(&adap->lock);
+	if (conn_info)
+		adap->conn_info = *conn_info;
+	else
+		memset(&adap->conn_info, 0, sizeof(adap->conn_info));
+	cec_post_state_event(adap);
+	mutex_unlock(&adap->lock);
+}
+EXPORT_SYMBOL_GPL(cec_s_conn_info);
+
+/*
+ * Called from either the ioctl or a driver to set the logical addresses.
+ *
+ * This function is called with adap->lock held.
+ */
+int __cec_s_log_addrs(struct cec_adapter *adap,
+		      struct cec_log_addrs *log_addrs, bool block)
+{
+	u16 type_mask = 0;
+	int i;
+
+	if (adap->devnode.unregistered)
+		return -ENODEV;
+
+	if (!log_addrs || log_addrs->num_log_addrs == 0) {
+		cec_adap_unconfigure(adap);
+		adap->log_addrs.num_log_addrs = 0;
+		for (i = 0; i < CEC_MAX_LOG_ADDRS; i++)
+			adap->log_addrs.log_addr[i] = CEC_LOG_ADDR_INVALID;
+		adap->log_addrs.osd_name[0] = '\0';
+		adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE;
+		adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0;
+		return 0;
+	}
+
+	if (log_addrs->flags & CEC_LOG_ADDRS_FL_CDC_ONLY) {
+		/*
+		 * Sanitize log_addrs fields if a CDC-Only device is
+		 * requested.
+		 */
+		log_addrs->num_log_addrs = 1;
+		log_addrs->osd_name[0] = '\0';
+		log_addrs->vendor_id = CEC_VENDOR_ID_NONE;
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
+		/*
+		 * This is just an internal convention since a CDC-Only device
+		 * doesn't have to be a switch. But switches already use
+		 * unregistered, so it makes some kind of sense to pick this
+		 * as the primary device. Since a CDC-Only device never sends
+		 * any 'normal' CEC messages this primary device type is never
+		 * sent over the CEC bus.
+		 */
+		log_addrs->primary_device_type[0] = CEC_OP_PRIM_DEVTYPE_SWITCH;
+		log_addrs->all_device_types[0] = 0;
+		log_addrs->features[0][0] = 0;
+		log_addrs->features[0][1] = 0;
+	}
+
+	/* Ensure the osd name is 0-terminated */
+	log_addrs->osd_name[sizeof(log_addrs->osd_name) - 1] = '\0';
+
+	/* Sanity checks */
+	if (log_addrs->num_log_addrs > adap->available_log_addrs) {
+		dprintk(1, "num_log_addrs > %d\n", adap->available_log_addrs);
+		return -EINVAL;
+	}
+
+	/*
+	 * Vendor ID is a 24 bit number, so check if the value is
+	 * within the correct range.
+	 */
+	if (log_addrs->vendor_id != CEC_VENDOR_ID_NONE &&
+	    (log_addrs->vendor_id & 0xff000000) != 0) {
+		dprintk(1, "invalid vendor ID\n");
+		return -EINVAL;
+	}
+
+	if (log_addrs->cec_version != CEC_OP_CEC_VERSION_1_4 &&
+	    log_addrs->cec_version != CEC_OP_CEC_VERSION_2_0) {
+		dprintk(1, "invalid CEC version\n");
+		return -EINVAL;
+	}
+
+	if (log_addrs->num_log_addrs > 1)
+		for (i = 0; i < log_addrs->num_log_addrs; i++)
+			if (log_addrs->log_addr_type[i] ==
+					CEC_LOG_ADDR_TYPE_UNREGISTERED) {
+				dprintk(1, "num_log_addrs > 1 can't be combined with unregistered LA\n");
+				return -EINVAL;
+			}
+
+	for (i = 0; i < log_addrs->num_log_addrs; i++) {
+		const u8 feature_sz = ARRAY_SIZE(log_addrs->features[0]);
+		u8 *features = log_addrs->features[i];
+		bool op_is_dev_features = false;
+		unsigned j;
+
+		log_addrs->log_addr[i] = CEC_LOG_ADDR_INVALID;
+		if (type_mask & (1 << log_addrs->log_addr_type[i])) {
+			dprintk(1, "duplicate logical address type\n");
+			return -EINVAL;
+		}
+		type_mask |= 1 << log_addrs->log_addr_type[i];
+		if ((type_mask & (1 << CEC_LOG_ADDR_TYPE_RECORD)) &&
+		    (type_mask & (1 << CEC_LOG_ADDR_TYPE_PLAYBACK))) {
+			/* Record already contains the playback functionality */
+			dprintk(1, "invalid record + playback combination\n");
+			return -EINVAL;
+		}
+		if (log_addrs->primary_device_type[i] >
+					CEC_OP_PRIM_DEVTYPE_PROCESSOR) {
+			dprintk(1, "unknown primary device type\n");
+			return -EINVAL;
+		}
+		if (log_addrs->primary_device_type[i] == 2) {
+			dprintk(1, "invalid primary device type\n");
+			return -EINVAL;
+		}
+		if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) {
+			dprintk(1, "unknown logical address type\n");
+			return -EINVAL;
+		}
+		for (j = 0; j < feature_sz; j++) {
+			if ((features[j] & 0x80) == 0) {
+				if (op_is_dev_features)
+					break;
+				op_is_dev_features = true;
+			}
+		}
+		if (!op_is_dev_features || j == feature_sz) {
+			dprintk(1, "malformed features\n");
+			return -EINVAL;
+		}
+		/* Zero unused part of the feature array */
+		memset(features + j + 1, 0, feature_sz - j - 1);
+	}
+
+	if (log_addrs->cec_version >= CEC_OP_CEC_VERSION_2_0) {
+		if (log_addrs->num_log_addrs > 2) {
+			dprintk(1, "CEC 2.0 allows no more than 2 logical addresses\n");
+			return -EINVAL;
+		}
+		if (log_addrs->num_log_addrs == 2) {
+			if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_AUDIOSYSTEM) |
+					   (1 << CEC_LOG_ADDR_TYPE_TV)))) {
+				dprintk(1, "two LAs is only allowed for audiosystem and TV\n");
+				return -EINVAL;
+			}
+			if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_PLAYBACK) |
+					   (1 << CEC_LOG_ADDR_TYPE_RECORD)))) {
+				dprintk(1, "an audiosystem/TV can only be combined with record or playback\n");
+				return -EINVAL;
+			}
+		}
+	}
+
+	/* Zero unused LAs */
+	for (i = log_addrs->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++) {
+		log_addrs->primary_device_type[i] = 0;
+		log_addrs->log_addr_type[i] = 0;
+		log_addrs->all_device_types[i] = 0;
+		memset(log_addrs->features[i], 0,
+		       sizeof(log_addrs->features[i]));
+	}
+
+	log_addrs->log_addr_mask = adap->log_addrs.log_addr_mask;
+	adap->log_addrs = *log_addrs;
+	if (adap->phys_addr != CEC_PHYS_ADDR_INVALID)
+		cec_claim_log_addrs(adap, block);
+	return 0;
+}
+
+int cec_s_log_addrs(struct cec_adapter *adap,
+		    struct cec_log_addrs *log_addrs, bool block)
+{
+	int err;
+
+	mutex_lock(&adap->lock);
+	err = __cec_s_log_addrs(adap, log_addrs, block);
+	mutex_unlock(&adap->lock);
+	return err;
+}
+EXPORT_SYMBOL_GPL(cec_s_log_addrs);
+
+/* High-level core CEC message handling */
+
+/* Fill in the Report Features message */
+static void cec_fill_msg_report_features(struct cec_adapter *adap,
+					 struct cec_msg *msg,
+					 unsigned int la_idx)
+{
+	const struct cec_log_addrs *las = &adap->log_addrs;
+	const u8 *features = las->features[la_idx];
+	bool op_is_dev_features = false;
+	unsigned int idx;
+
+	/* Report Features */
+	msg->msg[0] = (las->log_addr[la_idx] << 4) | 0x0f;
+	msg->len = 4;
+	msg->msg[1] = CEC_MSG_REPORT_FEATURES;
+	msg->msg[2] = adap->log_addrs.cec_version;
+	msg->msg[3] = las->all_device_types[la_idx];
+
+	/* Write RC Profiles first, then Device Features */
+	for (idx = 0; idx < ARRAY_SIZE(las->features[0]); idx++) {
+		msg->msg[msg->len++] = features[idx];
+		if ((features[idx] & CEC_OP_FEAT_EXT) == 0) {
+			if (op_is_dev_features)
+				break;
+			op_is_dev_features = true;
+		}
+	}
+}
+
+/* Transmit the Feature Abort message */
+static int cec_feature_abort_reason(struct cec_adapter *adap,
+				    struct cec_msg *msg, u8 reason)
+{
+	struct cec_msg tx_msg = { };
+
+	/*
+	 * Don't reply with CEC_MSG_FEATURE_ABORT to a CEC_MSG_FEATURE_ABORT
+	 * message!
+	 */
+	if (msg->msg[1] == CEC_MSG_FEATURE_ABORT)
+		return 0;
+	/* Don't Feature Abort messages from 'Unregistered' */
+	if (cec_msg_initiator(msg) == CEC_LOG_ADDR_UNREGISTERED)
+		return 0;
+	cec_msg_set_reply_to(&tx_msg, msg);
+	cec_msg_feature_abort(&tx_msg, msg->msg[1], reason);
+	return cec_transmit_msg(adap, &tx_msg, false);
+}
+
+static int cec_feature_abort(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	return cec_feature_abort_reason(adap, msg,
+					CEC_OP_ABORT_UNRECOGNIZED_OP);
+}
+
+static int cec_feature_refused(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	return cec_feature_abort_reason(adap, msg,
+					CEC_OP_ABORT_REFUSED);
+}
+
+/*
+ * Called when a CEC message is received. This function will do any
+ * necessary core processing. The is_reply bool is true if this message
+ * is a reply to an earlier transmit.
+ *
+ * The message is either a broadcast message or a valid directed message.
+ */
+static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
+			      bool is_reply)
+{
+	bool is_broadcast = cec_msg_is_broadcast(msg);
+	u8 dest_laddr = cec_msg_destination(msg);
+	u8 init_laddr = cec_msg_initiator(msg);
+	u8 devtype = cec_log_addr2dev(adap, dest_laddr);
+	int la_idx = cec_log_addr2idx(adap, dest_laddr);
+	bool from_unregistered = init_laddr == 0xf;
+	struct cec_msg tx_cec_msg = { };
+
+	dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
+
+	/* If this is a CDC-Only device, then ignore any non-CDC messages */
+	if (cec_is_cdc_only(&adap->log_addrs) &&
+	    msg->msg[1] != CEC_MSG_CDC_MESSAGE)
+		return 0;
+
+	if (adap->ops->received) {
+		/* Allow drivers to process the message first */
+		if (adap->ops->received(adap, msg) != -ENOMSG)
+			return 0;
+	}
+
+	/*
+	 * REPORT_PHYSICAL_ADDR, CEC_MSG_USER_CONTROL_PRESSED and
+	 * CEC_MSG_USER_CONTROL_RELEASED messages always have to be
+	 * handled by the CEC core, even if the passthrough mode is on.
+	 * The others are just ignored if passthrough mode is on.
+	 */
+	switch (msg->msg[1]) {
+	case CEC_MSG_GET_CEC_VERSION:
+	case CEC_MSG_ABORT:
+	case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
+	case CEC_MSG_GIVE_OSD_NAME:
+		/*
+		 * These messages reply with a directed message, so ignore if
+		 * the initiator is Unregistered.
+		 */
+		if (!adap->passthrough && from_unregistered)
+			return 0;
+		/* Fall through */
+	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
+	case CEC_MSG_GIVE_FEATURES:
+	case CEC_MSG_GIVE_PHYSICAL_ADDR:
+		/*
+		 * Skip processing these messages if the passthrough mode
+		 * is on.
+		 */
+		if (adap->passthrough)
+			goto skip_processing;
+		/* Ignore if addressing is wrong */
+		if (is_broadcast)
+			return 0;
+		break;
+
+	case CEC_MSG_USER_CONTROL_PRESSED:
+	case CEC_MSG_USER_CONTROL_RELEASED:
+		/* Wrong addressing mode: don't process */
+		if (is_broadcast || from_unregistered)
+			goto skip_processing;
+		break;
+
+	case CEC_MSG_REPORT_PHYSICAL_ADDR:
+		/*
+		 * This message is always processed, regardless of the
+		 * passthrough setting.
+		 *
+		 * Exception: don't process if wrong addressing mode.
+		 */
+		if (!is_broadcast)
+			goto skip_processing;
+		break;
+
+	default:
+		break;
+	}
+
+	cec_msg_set_reply_to(&tx_cec_msg, msg);
+
+	switch (msg->msg[1]) {
+	/* The following messages are processed but still passed through */
+	case CEC_MSG_REPORT_PHYSICAL_ADDR: {
+		u16 pa = (msg->msg[2] << 8) | msg->msg[3];
+
+		if (!from_unregistered)
+			adap->phys_addrs[init_laddr] = pa;
+		dprintk(1, "reported physical address %x.%x.%x.%x for logical address %d\n",
+			cec_phys_addr_exp(pa), init_laddr);
+		break;
+	}
+
+	case CEC_MSG_USER_CONTROL_PRESSED:
+		if (!(adap->capabilities & CEC_CAP_RC) ||
+		    !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU))
+			break;
+
+#ifdef CONFIG_MEDIA_CEC_RC
+		switch (msg->msg[2]) {
+		/*
+		 * Play function, this message can have variable length
+		 * depending on the specific play function that is used.
+		 */
+		case CEC_OP_UI_CMD_PLAY_FUNCTION:
+			if (msg->len == 2)
+				rc_keydown(adap->rc, RC_PROTO_CEC,
+					   msg->msg[2], 0);
+			else
+				rc_keydown(adap->rc, RC_PROTO_CEC,
+					   msg->msg[2] << 8 | msg->msg[3], 0);
+			break;
+		/*
+		 * Other function messages that are not handled.
+		 * Currently the RC framework does not allow to supply an
+		 * additional parameter to a keypress. These "keys" contain
+		 * other information such as channel number, an input number
+		 * etc.
+		 * For the time being these messages are not processed by the
+		 * framework and are simply forwarded to the user space.
+		 */
+		case CEC_OP_UI_CMD_SELECT_BROADCAST_TYPE:
+		case CEC_OP_UI_CMD_SELECT_SOUND_PRESENTATION:
+		case CEC_OP_UI_CMD_TUNE_FUNCTION:
+		case CEC_OP_UI_CMD_SELECT_MEDIA_FUNCTION:
+		case CEC_OP_UI_CMD_SELECT_AV_INPUT_FUNCTION:
+		case CEC_OP_UI_CMD_SELECT_AUDIO_INPUT_FUNCTION:
+			break;
+		default:
+			rc_keydown(adap->rc, RC_PROTO_CEC, msg->msg[2], 0);
+			break;
+		}
+#endif
+		break;
+
+	case CEC_MSG_USER_CONTROL_RELEASED:
+		if (!(adap->capabilities & CEC_CAP_RC) ||
+		    !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU))
+			break;
+#ifdef CONFIG_MEDIA_CEC_RC
+		rc_keyup(adap->rc);
+#endif
+		break;
+
+	/*
+	 * The remaining messages are only processed if the passthrough mode
+	 * is off.
+	 */
+	case CEC_MSG_GET_CEC_VERSION:
+		cec_msg_cec_version(&tx_cec_msg, adap->log_addrs.cec_version);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_GIVE_PHYSICAL_ADDR:
+		/* Do nothing for CEC switches using addr 15 */
+		if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH && dest_laddr == 15)
+			return 0;
+		cec_msg_report_physical_addr(&tx_cec_msg, adap->phys_addr, devtype);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
+		if (adap->log_addrs.vendor_id == CEC_VENDOR_ID_NONE)
+			return cec_feature_abort(adap, msg);
+		cec_msg_device_vendor_id(&tx_cec_msg, adap->log_addrs.vendor_id);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_ABORT:
+		/* Do nothing for CEC switches */
+		if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH)
+			return 0;
+		return cec_feature_refused(adap, msg);
+
+	case CEC_MSG_GIVE_OSD_NAME: {
+		if (adap->log_addrs.osd_name[0] == 0)
+			return cec_feature_abort(adap, msg);
+		cec_msg_set_osd_name(&tx_cec_msg, adap->log_addrs.osd_name);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+	}
+
+	case CEC_MSG_GIVE_FEATURES:
+		if (adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0)
+			return cec_feature_abort(adap, msg);
+		cec_fill_msg_report_features(adap, &tx_cec_msg, la_idx);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	default:
+		/*
+		 * Unprocessed messages are aborted if userspace isn't doing
+		 * any processing either.
+		 */
+		if (!is_broadcast && !is_reply && !adap->follower_cnt &&
+		    !adap->cec_follower && msg->msg[1] != CEC_MSG_FEATURE_ABORT)
+			return cec_feature_abort(adap, msg);
+		break;
+	}
+
+skip_processing:
+	/* If this was a reply, then we're done, unless otherwise specified */
+	if (is_reply && !(msg->flags & CEC_MSG_FL_REPLY_TO_FOLLOWERS))
+		return 0;
+
+	/*
+	 * Send to the exclusive follower if there is one, otherwise send
+	 * to all followers.
+	 */
+	if (adap->cec_follower)
+		cec_queue_msg_fh(adap->cec_follower, msg);
+	else
+		cec_queue_msg_followers(adap, msg);
+	return 0;
+}
+
+/*
+ * Helper functions to keep track of the 'monitor all' use count.
+ *
+ * These functions are called with adap->lock held.
+ */
+int cec_monitor_all_cnt_inc(struct cec_adapter *adap)
+{
+	int ret = 0;
+
+	if (adap->monitor_all_cnt == 0)
+		ret = call_op(adap, adap_monitor_all_enable, 1);
+	if (ret == 0)
+		adap->monitor_all_cnt++;
+	return ret;
+}
+
+void cec_monitor_all_cnt_dec(struct cec_adapter *adap)
+{
+	adap->monitor_all_cnt--;
+	if (adap->monitor_all_cnt == 0)
+		WARN_ON(call_op(adap, adap_monitor_all_enable, 0));
+}
+
+/*
+ * Helper functions to keep track of the 'monitor pin' use count.
+ *
+ * These functions are called with adap->lock held.
+ */
+int cec_monitor_pin_cnt_inc(struct cec_adapter *adap)
+{
+	int ret = 0;
+
+	if (adap->monitor_pin_cnt == 0)
+		ret = call_op(adap, adap_monitor_pin_enable, 1);
+	if (ret == 0)
+		adap->monitor_pin_cnt++;
+	return ret;
+}
+
+void cec_monitor_pin_cnt_dec(struct cec_adapter *adap)
+{
+	adap->monitor_pin_cnt--;
+	if (adap->monitor_pin_cnt == 0)
+		WARN_ON(call_op(adap, adap_monitor_pin_enable, 0));
+}
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * Log the current state of the CEC adapter.
+ * Very useful for debugging.
+ */
+int cec_adap_status(struct seq_file *file, void *priv)
+{
+	struct cec_adapter *adap = dev_get_drvdata(file->private);
+	struct cec_data *data;
+
+	mutex_lock(&adap->lock);
+	seq_printf(file, "configured: %d\n", adap->is_configured);
+	seq_printf(file, "configuring: %d\n", adap->is_configuring);
+	seq_printf(file, "phys_addr: %x.%x.%x.%x\n",
+		   cec_phys_addr_exp(adap->phys_addr));
+	seq_printf(file, "number of LAs: %d\n", adap->log_addrs.num_log_addrs);
+	seq_printf(file, "LA mask: 0x%04x\n", adap->log_addrs.log_addr_mask);
+	if (adap->cec_follower)
+		seq_printf(file, "has CEC follower%s\n",
+			   adap->passthrough ? " (in passthrough mode)" : "");
+	if (adap->cec_initiator)
+		seq_puts(file, "has CEC initiator\n");
+	if (adap->monitor_all_cnt)
+		seq_printf(file, "file handles in Monitor All mode: %u\n",
+			   adap->monitor_all_cnt);
+	if (adap->tx_timeouts) {
+		seq_printf(file, "transmit timeouts: %u\n",
+			   adap->tx_timeouts);
+		adap->tx_timeouts = 0;
+	}
+	data = adap->transmitting;
+	if (data)
+		seq_printf(file, "transmitting message: %*ph (reply: %02x, timeout: %ums)\n",
+			   data->msg.len, data->msg.msg, data->msg.reply,
+			   data->msg.timeout);
+	seq_printf(file, "pending transmits: %u\n", adap->transmit_queue_sz);
+	list_for_each_entry(data, &adap->transmit_queue, list) {
+		seq_printf(file, "queued tx message: %*ph (reply: %02x, timeout: %ums)\n",
+			   data->msg.len, data->msg.msg, data->msg.reply,
+			   data->msg.timeout);
+	}
+	list_for_each_entry(data, &adap->wait_queue, list) {
+		seq_printf(file, "message waiting for reply: %*ph (reply: %02x, timeout: %ums)\n",
+			   data->msg.len, data->msg.msg, data->msg.reply,
+			   data->msg.timeout);
+	}
+
+	call_void_op(adap, adap_status, file);
+	mutex_unlock(&adap->lock);
+	return 0;
+}
+#endif
diff --git a/drivers/media/cec/core/cec-api.c b/drivers/media/cec/core/cec-api.c
new file mode 100644
index 000000000000..17d1cb2e5f97
--- /dev/null
+++ b/drivers/media/cec/core/cec-api.c
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cec-api.c - HDMI Consumer Electronics Control framework - API
+ *
+ * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/ktime.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/version.h>
+
+#include <media/cec-pin.h>
+#include "cec-priv.h"
+#include "cec-pin-priv.h"
+
+static inline struct cec_devnode *cec_devnode_data(struct file *filp)
+{
+	struct cec_fh *fh = filp->private_data;
+
+	return &fh->adap->devnode;
+}
+
+/* CEC file operations */
+
+static __poll_t cec_poll(struct file *filp,
+			     struct poll_table_struct *poll)
+{
+	struct cec_fh *fh = filp->private_data;
+	struct cec_adapter *adap = fh->adap;
+	__poll_t res = 0;
+
+	poll_wait(filp, &fh->wait, poll);
+	if (!cec_is_registered(adap))
+		return EPOLLERR | EPOLLHUP;
+	mutex_lock(&adap->lock);
+	if (adap->is_configured &&
+	    adap->transmit_queue_sz < CEC_MAX_MSG_TX_QUEUE_SZ)
+		res |= EPOLLOUT | EPOLLWRNORM;
+	if (fh->queued_msgs)
+		res |= EPOLLIN | EPOLLRDNORM;
+	if (fh->total_queued_events)
+		res |= EPOLLPRI;
+	mutex_unlock(&adap->lock);
+	return res;
+}
+
+static bool cec_is_busy(const struct cec_adapter *adap,
+			const struct cec_fh *fh)
+{
+	bool valid_initiator = adap->cec_initiator && adap->cec_initiator == fh;
+	bool valid_follower = adap->cec_follower && adap->cec_follower == fh;
+
+	/*
+	 * Exclusive initiators and followers can always access the CEC adapter
+	 */
+	if (valid_initiator || valid_follower)
+		return false;
+	/*
+	 * All others can only access the CEC adapter if there is no
+	 * exclusive initiator and they are in INITIATOR mode.
+	 */
+	return adap->cec_initiator ||
+	       fh->mode_initiator == CEC_MODE_NO_INITIATOR;
+}
+
+static long cec_adap_g_caps(struct cec_adapter *adap,
+			    struct cec_caps __user *parg)
+{
+	struct cec_caps caps = {};
+
+	strscpy(caps.driver, adap->devnode.dev.parent->driver->name,
+		sizeof(caps.driver));
+	strscpy(caps.name, adap->name, sizeof(caps.name));
+	caps.available_log_addrs = adap->available_log_addrs;
+	caps.capabilities = adap->capabilities;
+	caps.version = LINUX_VERSION_CODE;
+	if (copy_to_user(parg, &caps, sizeof(caps)))
+		return -EFAULT;
+	return 0;
+}
+
+static long cec_adap_g_phys_addr(struct cec_adapter *adap,
+				 __u16 __user *parg)
+{
+	u16 phys_addr;
+
+	mutex_lock(&adap->lock);
+	phys_addr = adap->phys_addr;
+	mutex_unlock(&adap->lock);
+	if (copy_to_user(parg, &phys_addr, sizeof(phys_addr)))
+		return -EFAULT;
+	return 0;
+}
+
+static int cec_validate_phys_addr(u16 phys_addr)
+{
+	int i;
+
+	if (phys_addr == CEC_PHYS_ADDR_INVALID)
+		return 0;
+	for (i = 0; i < 16; i += 4)
+		if (phys_addr & (0xf << i))
+			break;
+	if (i == 16)
+		return 0;
+	for (i += 4; i < 16; i += 4)
+		if ((phys_addr & (0xf << i)) == 0)
+			return -EINVAL;
+	return 0;
+}
+
+static long cec_adap_s_phys_addr(struct cec_adapter *adap, struct cec_fh *fh,
+				 bool block, __u16 __user *parg)
+{
+	u16 phys_addr;
+	long err;
+
+	if (!(adap->capabilities & CEC_CAP_PHYS_ADDR))
+		return -ENOTTY;
+	if (copy_from_user(&phys_addr, parg, sizeof(phys_addr)))
+		return -EFAULT;
+
+	err = cec_validate_phys_addr(phys_addr);
+	if (err)
+		return err;
+	mutex_lock(&adap->lock);
+	if (cec_is_busy(adap, fh))
+		err = -EBUSY;
+	else
+		__cec_s_phys_addr(adap, phys_addr, block);
+	mutex_unlock(&adap->lock);
+	return err;
+}
+
+static long cec_adap_g_log_addrs(struct cec_adapter *adap,
+				 struct cec_log_addrs __user *parg)
+{
+	struct cec_log_addrs log_addrs;
+
+	mutex_lock(&adap->lock);
+	log_addrs = adap->log_addrs;
+	if (!adap->is_configured)
+		memset(log_addrs.log_addr, CEC_LOG_ADDR_INVALID,
+		       sizeof(log_addrs.log_addr));
+	mutex_unlock(&adap->lock);
+
+	if (copy_to_user(parg, &log_addrs, sizeof(log_addrs)))
+		return -EFAULT;
+	return 0;
+}
+
+static long cec_adap_s_log_addrs(struct cec_adapter *adap, struct cec_fh *fh,
+				 bool block, struct cec_log_addrs __user *parg)
+{
+	struct cec_log_addrs log_addrs;
+	long err = -EBUSY;
+
+	if (!(adap->capabilities & CEC_CAP_LOG_ADDRS))
+		return -ENOTTY;
+	if (copy_from_user(&log_addrs, parg, sizeof(log_addrs)))
+		return -EFAULT;
+	log_addrs.flags &= CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK |
+			   CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU |
+			   CEC_LOG_ADDRS_FL_CDC_ONLY;
+	mutex_lock(&adap->lock);
+	if (!adap->is_configuring &&
+	    (!log_addrs.num_log_addrs || !adap->is_configured) &&
+	    !cec_is_busy(adap, fh)) {
+		err = __cec_s_log_addrs(adap, &log_addrs, block);
+		if (!err)
+			log_addrs = adap->log_addrs;
+	}
+	mutex_unlock(&adap->lock);
+	if (err)
+		return err;
+	if (copy_to_user(parg, &log_addrs, sizeof(log_addrs)))
+		return -EFAULT;
+	return 0;
+}
+
+static long cec_adap_g_connector_info(struct cec_adapter *adap,
+				      struct cec_log_addrs __user *parg)
+{
+	int ret = 0;
+
+	if (!(adap->capabilities & CEC_CAP_CONNECTOR_INFO))
+		return -ENOTTY;
+
+	mutex_lock(&adap->lock);
+	if (copy_to_user(parg, &adap->conn_info, sizeof(adap->conn_info)))
+		ret = -EFAULT;
+	mutex_unlock(&adap->lock);
+	return ret;
+}
+
+static long cec_transmit(struct cec_adapter *adap, struct cec_fh *fh,
+			 bool block, struct cec_msg __user *parg)
+{
+	struct cec_msg msg = {};
+	long err = 0;
+
+	if (!(adap->capabilities & CEC_CAP_TRANSMIT))
+		return -ENOTTY;
+	if (copy_from_user(&msg, parg, sizeof(msg)))
+		return -EFAULT;
+
+	mutex_lock(&adap->lock);
+	if (adap->log_addrs.num_log_addrs == 0)
+		err = -EPERM;
+	else if (adap->is_configuring)
+		err = -ENONET;
+	else if (cec_is_busy(adap, fh))
+		err = -EBUSY;
+	else
+		err = cec_transmit_msg_fh(adap, &msg, fh, block);
+	mutex_unlock(&adap->lock);
+	if (err)
+		return err;
+	if (copy_to_user(parg, &msg, sizeof(msg)))
+		return -EFAULT;
+	return 0;
+}
+
+/* Called by CEC_RECEIVE: wait for a message to arrive */
+static int cec_receive_msg(struct cec_fh *fh, struct cec_msg *msg, bool block)
+{
+	u32 timeout = msg->timeout;
+	int res;
+
+	do {
+		mutex_lock(&fh->lock);
+		/* Are there received messages queued up? */
+		if (fh->queued_msgs) {
+			/* Yes, return the first one */
+			struct cec_msg_entry *entry =
+				list_first_entry(&fh->msgs,
+						 struct cec_msg_entry, list);
+
+			list_del(&entry->list);
+			*msg = entry->msg;
+			kfree(entry);
+			fh->queued_msgs--;
+			mutex_unlock(&fh->lock);
+			/* restore original timeout value */
+			msg->timeout = timeout;
+			return 0;
+		}
+
+		/* No, return EAGAIN in non-blocking mode or wait */
+		mutex_unlock(&fh->lock);
+
+		/* Return when in non-blocking mode */
+		if (!block)
+			return -EAGAIN;
+
+		if (msg->timeout) {
+			/* The user specified a timeout */
+			res = wait_event_interruptible_timeout(fh->wait,
+							       fh->queued_msgs,
+				msecs_to_jiffies(msg->timeout));
+			if (res == 0)
+				res = -ETIMEDOUT;
+			else if (res > 0)
+				res = 0;
+		} else {
+			/* Wait indefinitely */
+			res = wait_event_interruptible(fh->wait,
+						       fh->queued_msgs);
+		}
+		/* Exit on error, otherwise loop to get the new message */
+	} while (!res);
+	return res;
+}
+
+static long cec_receive(struct cec_adapter *adap, struct cec_fh *fh,
+			bool block, struct cec_msg __user *parg)
+{
+	struct cec_msg msg = {};
+	long err;
+
+	if (copy_from_user(&msg, parg, sizeof(msg)))
+		return -EFAULT;
+
+	err = cec_receive_msg(fh, &msg, block);
+	if (err)
+		return err;
+	msg.flags = 0;
+	if (copy_to_user(parg, &msg, sizeof(msg)))
+		return -EFAULT;
+	return 0;
+}
+
+static long cec_dqevent(struct cec_adapter *adap, struct cec_fh *fh,
+			bool block, struct cec_event __user *parg)
+{
+	struct cec_event_entry *ev = NULL;
+	u64 ts = ~0ULL;
+	unsigned int i;
+	unsigned int ev_idx;
+	long err = 0;
+
+	mutex_lock(&fh->lock);
+	while (!fh->total_queued_events && block) {
+		mutex_unlock(&fh->lock);
+		err = wait_event_interruptible(fh->wait,
+					       fh->total_queued_events);
+		if (err)
+			return err;
+		mutex_lock(&fh->lock);
+	}
+
+	/* Find the oldest event */
+	for (i = 0; i < CEC_NUM_EVENTS; i++) {
+		struct cec_event_entry *entry =
+			list_first_entry_or_null(&fh->events[i],
+						 struct cec_event_entry, list);
+
+		if (entry && entry->ev.ts <= ts) {
+			ev = entry;
+			ev_idx = i;
+			ts = ev->ev.ts;
+		}
+	}
+
+	if (!ev) {
+		err = -EAGAIN;
+		goto unlock;
+	}
+	list_del(&ev->list);
+
+	if (copy_to_user(parg, &ev->ev, sizeof(ev->ev)))
+		err = -EFAULT;
+	if (ev_idx >= CEC_NUM_CORE_EVENTS)
+		kfree(ev);
+	fh->queued_events[ev_idx]--;
+	fh->total_queued_events--;
+
+unlock:
+	mutex_unlock(&fh->lock);
+	return err;
+}
+
+static long cec_g_mode(struct cec_adapter *adap, struct cec_fh *fh,
+		       u32 __user *parg)
+{
+	u32 mode = fh->mode_initiator | fh->mode_follower;
+
+	if (copy_to_user(parg, &mode, sizeof(mode)))
+		return -EFAULT;
+	return 0;
+}
+
+static long cec_s_mode(struct cec_adapter *adap, struct cec_fh *fh,
+		       u32 __user *parg)
+{
+	u32 mode;
+	u8 mode_initiator;
+	u8 mode_follower;
+	bool send_pin_event = false;
+	long err = 0;
+
+	if (copy_from_user(&mode, parg, sizeof(mode)))
+		return -EFAULT;
+	if (mode & ~(CEC_MODE_INITIATOR_MSK | CEC_MODE_FOLLOWER_MSK)) {
+		dprintk(1, "%s: invalid mode bits set\n", __func__);
+		return -EINVAL;
+	}
+
+	mode_initiator = mode & CEC_MODE_INITIATOR_MSK;
+	mode_follower = mode & CEC_MODE_FOLLOWER_MSK;
+
+	if (mode_initiator > CEC_MODE_EXCL_INITIATOR ||
+	    mode_follower > CEC_MODE_MONITOR_ALL) {
+		dprintk(1, "%s: unknown mode\n", __func__);
+		return -EINVAL;
+	}
+
+	if (mode_follower == CEC_MODE_MONITOR_ALL &&
+	    !(adap->capabilities & CEC_CAP_MONITOR_ALL)) {
+		dprintk(1, "%s: MONITOR_ALL not supported\n", __func__);
+		return -EINVAL;
+	}
+
+	if (mode_follower == CEC_MODE_MONITOR_PIN &&
+	    !(adap->capabilities & CEC_CAP_MONITOR_PIN)) {
+		dprintk(1, "%s: MONITOR_PIN not supported\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Follower modes should always be able to send CEC messages */
+	if ((mode_initiator == CEC_MODE_NO_INITIATOR ||
+	     !(adap->capabilities & CEC_CAP_TRANSMIT)) &&
+	    mode_follower >= CEC_MODE_FOLLOWER &&
+	    mode_follower <= CEC_MODE_EXCL_FOLLOWER_PASSTHRU) {
+		dprintk(1, "%s: cannot transmit\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Monitor modes require CEC_MODE_NO_INITIATOR */
+	if (mode_initiator && mode_follower >= CEC_MODE_MONITOR_PIN) {
+		dprintk(1, "%s: monitor modes require NO_INITIATOR\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	/* Monitor modes require CAP_NET_ADMIN */
+	if (mode_follower >= CEC_MODE_MONITOR_PIN && !capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	mutex_lock(&adap->lock);
+	/*
+	 * You can't become exclusive follower if someone else already
+	 * has that job.
+	 */
+	if ((mode_follower == CEC_MODE_EXCL_FOLLOWER ||
+	     mode_follower == CEC_MODE_EXCL_FOLLOWER_PASSTHRU) &&
+	    adap->cec_follower && adap->cec_follower != fh)
+		err = -EBUSY;
+	/*
+	 * You can't become exclusive initiator if someone else already
+	 * has that job.
+	 */
+	if (mode_initiator == CEC_MODE_EXCL_INITIATOR &&
+	    adap->cec_initiator && adap->cec_initiator != fh)
+		err = -EBUSY;
+
+	if (!err) {
+		bool old_mon_all = fh->mode_follower == CEC_MODE_MONITOR_ALL;
+		bool new_mon_all = mode_follower == CEC_MODE_MONITOR_ALL;
+
+		if (old_mon_all != new_mon_all) {
+			if (new_mon_all)
+				err = cec_monitor_all_cnt_inc(adap);
+			else
+				cec_monitor_all_cnt_dec(adap);
+		}
+	}
+
+	if (!err) {
+		bool old_mon_pin = fh->mode_follower == CEC_MODE_MONITOR_PIN;
+		bool new_mon_pin = mode_follower == CEC_MODE_MONITOR_PIN;
+
+		if (old_mon_pin != new_mon_pin) {
+			send_pin_event = new_mon_pin;
+			if (new_mon_pin)
+				err = cec_monitor_pin_cnt_inc(adap);
+			else
+				cec_monitor_pin_cnt_dec(adap);
+		}
+	}
+
+	if (err) {
+		mutex_unlock(&adap->lock);
+		return err;
+	}
+
+	if (fh->mode_follower == CEC_MODE_FOLLOWER)
+		adap->follower_cnt--;
+	if (mode_follower == CEC_MODE_FOLLOWER)
+		adap->follower_cnt++;
+	if (send_pin_event) {
+		struct cec_event ev = {
+			.flags = CEC_EVENT_FL_INITIAL_STATE,
+		};
+
+		ev.event = adap->cec_pin_is_high ? CEC_EVENT_PIN_CEC_HIGH :
+						   CEC_EVENT_PIN_CEC_LOW;
+		cec_queue_event_fh(fh, &ev, 0);
+	}
+	if (mode_follower == CEC_MODE_EXCL_FOLLOWER ||
+	    mode_follower == CEC_MODE_EXCL_FOLLOWER_PASSTHRU) {
+		adap->passthrough =
+			mode_follower == CEC_MODE_EXCL_FOLLOWER_PASSTHRU;
+		adap->cec_follower = fh;
+	} else if (adap->cec_follower == fh) {
+		adap->passthrough = false;
+		adap->cec_follower = NULL;
+	}
+	if (mode_initiator == CEC_MODE_EXCL_INITIATOR)
+		adap->cec_initiator = fh;
+	else if (adap->cec_initiator == fh)
+		adap->cec_initiator = NULL;
+	fh->mode_initiator = mode_initiator;
+	fh->mode_follower = mode_follower;
+	mutex_unlock(&adap->lock);
+	return 0;
+}
+
+static long cec_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	struct cec_fh *fh = filp->private_data;
+	struct cec_adapter *adap = fh->adap;
+	bool block = !(filp->f_flags & O_NONBLOCK);
+	void __user *parg = (void __user *)arg;
+
+	if (!cec_is_registered(adap))
+		return -ENODEV;
+
+	switch (cmd) {
+	case CEC_ADAP_G_CAPS:
+		return cec_adap_g_caps(adap, parg);
+
+	case CEC_ADAP_G_PHYS_ADDR:
+		return cec_adap_g_phys_addr(adap, parg);
+
+	case CEC_ADAP_S_PHYS_ADDR:
+		return cec_adap_s_phys_addr(adap, fh, block, parg);
+
+	case CEC_ADAP_G_LOG_ADDRS:
+		return cec_adap_g_log_addrs(adap, parg);
+
+	case CEC_ADAP_S_LOG_ADDRS:
+		return cec_adap_s_log_addrs(adap, fh, block, parg);
+
+	case CEC_ADAP_G_CONNECTOR_INFO:
+		return cec_adap_g_connector_info(adap, parg);
+
+	case CEC_TRANSMIT:
+		return cec_transmit(adap, fh, block, parg);
+
+	case CEC_RECEIVE:
+		return cec_receive(adap, fh, block, parg);
+
+	case CEC_DQEVENT:
+		return cec_dqevent(adap, fh, block, parg);
+
+	case CEC_G_MODE:
+		return cec_g_mode(adap, fh, parg);
+
+	case CEC_S_MODE:
+		return cec_s_mode(adap, fh, parg);
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int cec_open(struct inode *inode, struct file *filp)
+{
+	struct cec_devnode *devnode =
+		container_of(inode->i_cdev, struct cec_devnode, cdev);
+	struct cec_adapter *adap = to_cec_adapter(devnode);
+	struct cec_fh *fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+	/*
+	 * Initial events that are automatically sent when the cec device is
+	 * opened.
+	 */
+	struct cec_event ev = {
+		.event = CEC_EVENT_STATE_CHANGE,
+		.flags = CEC_EVENT_FL_INITIAL_STATE,
+	};
+	unsigned int i;
+	int err;
+
+	if (!fh)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&fh->msgs);
+	INIT_LIST_HEAD(&fh->xfer_list);
+	for (i = 0; i < CEC_NUM_EVENTS; i++)
+		INIT_LIST_HEAD(&fh->events[i]);
+	mutex_init(&fh->lock);
+	init_waitqueue_head(&fh->wait);
+
+	fh->mode_initiator = CEC_MODE_INITIATOR;
+	fh->adap = adap;
+
+	err = cec_get_device(devnode);
+	if (err) {
+		kfree(fh);
+		return err;
+	}
+
+	mutex_lock(&devnode->lock);
+	if (list_empty(&devnode->fhs) &&
+	    !adap->needs_hpd &&
+	    adap->phys_addr == CEC_PHYS_ADDR_INVALID) {
+		err = adap->ops->adap_enable(adap, true);
+		if (err) {
+			mutex_unlock(&devnode->lock);
+			kfree(fh);
+			return err;
+		}
+	}
+	filp->private_data = fh;
+
+	/* Queue up initial state events */
+	ev.state_change.phys_addr = adap->phys_addr;
+	ev.state_change.log_addr_mask = adap->log_addrs.log_addr_mask;
+	ev.state_change.have_conn_info =
+		adap->conn_info.type != CEC_CONNECTOR_TYPE_NO_CONNECTOR;
+	cec_queue_event_fh(fh, &ev, 0);
+#ifdef CONFIG_CEC_PIN
+	if (adap->pin && adap->pin->ops->read_hpd) {
+		err = adap->pin->ops->read_hpd(adap);
+		if (err >= 0) {
+			ev.event = err ? CEC_EVENT_PIN_HPD_HIGH :
+					 CEC_EVENT_PIN_HPD_LOW;
+			cec_queue_event_fh(fh, &ev, 0);
+		}
+	}
+	if (adap->pin && adap->pin->ops->read_5v) {
+		err = adap->pin->ops->read_5v(adap);
+		if (err >= 0) {
+			ev.event = err ? CEC_EVENT_PIN_5V_HIGH :
+					 CEC_EVENT_PIN_5V_LOW;
+			cec_queue_event_fh(fh, &ev, 0);
+		}
+	}
+#endif
+
+	list_add(&fh->list, &devnode->fhs);
+	mutex_unlock(&devnode->lock);
+
+	return 0;
+}
+
+/* Override for the release function */
+static int cec_release(struct inode *inode, struct file *filp)
+{
+	struct cec_devnode *devnode = cec_devnode_data(filp);
+	struct cec_adapter *adap = to_cec_adapter(devnode);
+	struct cec_fh *fh = filp->private_data;
+	unsigned int i;
+
+	mutex_lock(&adap->lock);
+	if (adap->cec_initiator == fh)
+		adap->cec_initiator = NULL;
+	if (adap->cec_follower == fh) {
+		adap->cec_follower = NULL;
+		adap->passthrough = false;
+	}
+	if (fh->mode_follower == CEC_MODE_FOLLOWER)
+		adap->follower_cnt--;
+	if (fh->mode_follower == CEC_MODE_MONITOR_PIN)
+		cec_monitor_pin_cnt_dec(adap);
+	if (fh->mode_follower == CEC_MODE_MONITOR_ALL)
+		cec_monitor_all_cnt_dec(adap);
+	mutex_unlock(&adap->lock);
+
+	mutex_lock(&devnode->lock);
+	list_del(&fh->list);
+	if (cec_is_registered(adap) && list_empty(&devnode->fhs) &&
+	    !adap->needs_hpd && adap->phys_addr == CEC_PHYS_ADDR_INVALID) {
+		WARN_ON(adap->ops->adap_enable(adap, false));
+	}
+	mutex_unlock(&devnode->lock);
+
+	/* Unhook pending transmits from this filehandle. */
+	mutex_lock(&adap->lock);
+	while (!list_empty(&fh->xfer_list)) {
+		struct cec_data *data =
+			list_first_entry(&fh->xfer_list, struct cec_data, xfer_list);
+
+		data->blocking = false;
+		data->fh = NULL;
+		list_del(&data->xfer_list);
+	}
+	mutex_unlock(&adap->lock);
+	while (!list_empty(&fh->msgs)) {
+		struct cec_msg_entry *entry =
+			list_first_entry(&fh->msgs, struct cec_msg_entry, list);
+
+		list_del(&entry->list);
+		kfree(entry);
+	}
+	for (i = CEC_NUM_CORE_EVENTS; i < CEC_NUM_EVENTS; i++) {
+		while (!list_empty(&fh->events[i])) {
+			struct cec_event_entry *entry =
+				list_first_entry(&fh->events[i],
+						 struct cec_event_entry, list);
+
+			list_del(&entry->list);
+			kfree(entry);
+		}
+	}
+	kfree(fh);
+
+	cec_put_device(devnode);
+	filp->private_data = NULL;
+	return 0;
+}
+
+const struct file_operations cec_devnode_fops = {
+	.owner = THIS_MODULE,
+	.open = cec_open,
+	.unlocked_ioctl = cec_ioctl,
+	.compat_ioctl = cec_ioctl,
+	.release = cec_release,
+	.poll = cec_poll,
+	.llseek = no_llseek,
+};
diff --git a/drivers/media/cec/core/cec-core.c b/drivers/media/cec/core/cec-core.c
new file mode 100644
index 000000000000..0c52e1bb3910
--- /dev/null
+++ b/drivers/media/cec/core/cec-core.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cec-core.c - HDMI Consumer Electronics Control framework - Core
+ *
+ * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include "cec-priv.h"
+
+#define CEC_NUM_DEVICES	256
+#define CEC_NAME	"cec"
+
+int cec_debug;
+module_param_named(debug, cec_debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+static bool debug_phys_addr;
+module_param(debug_phys_addr, bool, 0644);
+MODULE_PARM_DESC(debug_phys_addr, "add CEC_CAP_PHYS_ADDR if set");
+
+static dev_t cec_dev_t;
+
+/* Active devices */
+static DEFINE_MUTEX(cec_devnode_lock);
+static DECLARE_BITMAP(cec_devnode_nums, CEC_NUM_DEVICES);
+
+static struct dentry *top_cec_dir;
+
+/* dev to cec_devnode */
+#define to_cec_devnode(cd) container_of(cd, struct cec_devnode, dev)
+
+int cec_get_device(struct cec_devnode *devnode)
+{
+	/*
+	 * Check if the cec device is available. This needs to be done with
+	 * the devnode->lock held to prevent an open/unregister race:
+	 * without the lock, the device could be unregistered and freed between
+	 * the devnode->registered check and get_device() calls, leading to
+	 * a crash.
+	 */
+	mutex_lock(&devnode->lock);
+	/*
+	 * return ENXIO if the cec device has been removed
+	 * already or if it is not registered anymore.
+	 */
+	if (!devnode->registered) {
+		mutex_unlock(&devnode->lock);
+		return -ENXIO;
+	}
+	/* and increase the device refcount */
+	get_device(&devnode->dev);
+	mutex_unlock(&devnode->lock);
+	return 0;
+}
+
+void cec_put_device(struct cec_devnode *devnode)
+{
+	put_device(&devnode->dev);
+}
+
+/* Called when the last user of the cec device exits. */
+static void cec_devnode_release(struct device *cd)
+{
+	struct cec_devnode *devnode = to_cec_devnode(cd);
+
+	mutex_lock(&cec_devnode_lock);
+	/* Mark device node number as free */
+	clear_bit(devnode->minor, cec_devnode_nums);
+	mutex_unlock(&cec_devnode_lock);
+
+	cec_delete_adapter(to_cec_adapter(devnode));
+}
+
+static struct bus_type cec_bus_type = {
+	.name = CEC_NAME,
+};
+
+/*
+ * Register a cec device node
+ *
+ * The registration code assigns minor numbers and registers the new device node
+ * with the kernel. An error is returned if no free minor number can be found,
+ * or if the registration of the device node fails.
+ *
+ * Zero is returned on success.
+ *
+ * Note that if the cec_devnode_register call fails, the release() callback of
+ * the cec_devnode structure is *not* called, so the caller is responsible for
+ * freeing any data.
+ */
+static int __must_check cec_devnode_register(struct cec_devnode *devnode,
+					     struct module *owner)
+{
+	int minor;
+	int ret;
+
+	/* Part 1: Find a free minor number */
+	mutex_lock(&cec_devnode_lock);
+	minor = find_next_zero_bit(cec_devnode_nums, CEC_NUM_DEVICES, 0);
+	if (minor == CEC_NUM_DEVICES) {
+		mutex_unlock(&cec_devnode_lock);
+		pr_err("could not get a free minor\n");
+		return -ENFILE;
+	}
+
+	set_bit(minor, cec_devnode_nums);
+	mutex_unlock(&cec_devnode_lock);
+
+	devnode->minor = minor;
+	devnode->dev.bus = &cec_bus_type;
+	devnode->dev.devt = MKDEV(MAJOR(cec_dev_t), minor);
+	devnode->dev.release = cec_devnode_release;
+	dev_set_name(&devnode->dev, "cec%d", devnode->minor);
+	device_initialize(&devnode->dev);
+
+	/* Part 2: Initialize and register the character device */
+	cdev_init(&devnode->cdev, &cec_devnode_fops);
+	devnode->cdev.owner = owner;
+	kobject_set_name(&devnode->cdev.kobj, "cec%d", devnode->minor);
+
+	devnode->registered = true;
+	ret = cdev_device_add(&devnode->cdev, &devnode->dev);
+	if (ret) {
+		devnode->registered = false;
+		pr_err("%s: cdev_device_add failed\n", __func__);
+		goto clr_bit;
+	}
+
+	return 0;
+
+clr_bit:
+	mutex_lock(&cec_devnode_lock);
+	clear_bit(devnode->minor, cec_devnode_nums);
+	mutex_unlock(&cec_devnode_lock);
+	return ret;
+}
+
+/*
+ * Unregister a cec device node
+ *
+ * This unregisters the passed device. Future open calls will be met with
+ * errors.
+ *
+ * This function can safely be called if the device node has never been
+ * registered or has already been unregistered.
+ */
+static void cec_devnode_unregister(struct cec_adapter *adap)
+{
+	struct cec_devnode *devnode = &adap->devnode;
+	struct cec_fh *fh;
+
+	mutex_lock(&devnode->lock);
+
+	/* Check if devnode was never registered or already unregistered */
+	if (!devnode->registered || devnode->unregistered) {
+		mutex_unlock(&devnode->lock);
+		return;
+	}
+
+	list_for_each_entry(fh, &devnode->fhs, list)
+		wake_up_interruptible(&fh->wait);
+
+	devnode->registered = false;
+	devnode->unregistered = true;
+	mutex_unlock(&devnode->lock);
+
+	mutex_lock(&adap->lock);
+	__cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false);
+	__cec_s_log_addrs(adap, NULL, false);
+	mutex_unlock(&adap->lock);
+
+	cdev_device_del(&devnode->cdev, &devnode->dev);
+	put_device(&devnode->dev);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t cec_error_inj_write(struct file *file,
+	const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct seq_file *sf = file->private_data;
+	struct cec_adapter *adap = sf->private;
+	char *buf;
+	char *line;
+	char *p;
+
+	buf = memdup_user_nul(ubuf, min_t(size_t, PAGE_SIZE, count));
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+	p = buf;
+	while (p && *p) {
+		p = skip_spaces(p);
+		line = strsep(&p, "\n");
+		if (!*line || *line == '#')
+			continue;
+		if (!adap->ops->error_inj_parse_line(adap, line)) {
+			kfree(buf);
+			return -EINVAL;
+		}
+	}
+	kfree(buf);
+	return count;
+}
+
+static int cec_error_inj_show(struct seq_file *sf, void *unused)
+{
+	struct cec_adapter *adap = sf->private;
+
+	return adap->ops->error_inj_show(adap, sf);
+}
+
+static int cec_error_inj_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cec_error_inj_show, inode->i_private);
+}
+
+static const struct file_operations cec_error_inj_fops = {
+	.open = cec_error_inj_open,
+	.write = cec_error_inj_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+#endif
+
+struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops,
+					 void *priv, const char *name, u32 caps,
+					 u8 available_las)
+{
+	struct cec_adapter *adap;
+	int res;
+
+#ifndef CONFIG_MEDIA_CEC_RC
+	caps &= ~CEC_CAP_RC;
+#endif
+
+	if (WARN_ON(!caps))
+		return ERR_PTR(-EINVAL);
+	if (WARN_ON(!ops))
+		return ERR_PTR(-EINVAL);
+	if (WARN_ON(!available_las || available_las > CEC_MAX_LOG_ADDRS))
+		return ERR_PTR(-EINVAL);
+	adap = kzalloc(sizeof(*adap), GFP_KERNEL);
+	if (!adap)
+		return ERR_PTR(-ENOMEM);
+	strscpy(adap->name, name, sizeof(adap->name));
+	adap->phys_addr = CEC_PHYS_ADDR_INVALID;
+	adap->cec_pin_is_high = true;
+	adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0;
+	adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE;
+	adap->capabilities = caps;
+	if (debug_phys_addr)
+		adap->capabilities |= CEC_CAP_PHYS_ADDR;
+	adap->needs_hpd = caps & CEC_CAP_NEEDS_HPD;
+	adap->available_log_addrs = available_las;
+	adap->sequence = 0;
+	adap->ops = ops;
+	adap->priv = priv;
+	memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs));
+	mutex_init(&adap->lock);
+	INIT_LIST_HEAD(&adap->transmit_queue);
+	INIT_LIST_HEAD(&adap->wait_queue);
+	init_waitqueue_head(&adap->kthread_waitq);
+
+	/* adap->devnode initialization */
+	INIT_LIST_HEAD(&adap->devnode.fhs);
+	mutex_init(&adap->devnode.lock);
+
+	adap->kthread = kthread_run(cec_thread_func, adap, "cec-%s", name);
+	if (IS_ERR(adap->kthread)) {
+		pr_err("cec-%s: kernel_thread() failed\n", name);
+		res = PTR_ERR(adap->kthread);
+		kfree(adap);
+		return ERR_PTR(res);
+	}
+
+#ifdef CONFIG_MEDIA_CEC_RC
+	if (!(caps & CEC_CAP_RC))
+		return adap;
+
+	/* Prepare the RC input device */
+	adap->rc = rc_allocate_device(RC_DRIVER_SCANCODE);
+	if (!adap->rc) {
+		pr_err("cec-%s: failed to allocate memory for rc_dev\n",
+		       name);
+		kthread_stop(adap->kthread);
+		kfree(adap);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	snprintf(adap->input_phys, sizeof(adap->input_phys),
+		 "%s/input0", adap->name);
+
+	adap->rc->device_name = adap->name;
+	adap->rc->input_phys = adap->input_phys;
+	adap->rc->input_id.bustype = BUS_CEC;
+	adap->rc->input_id.vendor = 0;
+	adap->rc->input_id.product = 0;
+	adap->rc->input_id.version = 1;
+	adap->rc->driver_name = CEC_NAME;
+	adap->rc->allowed_protocols = RC_PROTO_BIT_CEC;
+	adap->rc->priv = adap;
+	adap->rc->map_name = RC_MAP_CEC;
+	adap->rc->timeout = MS_TO_NS(550);
+#endif
+	return adap;
+}
+EXPORT_SYMBOL_GPL(cec_allocate_adapter);
+
+int cec_register_adapter(struct cec_adapter *adap,
+			 struct device *parent)
+{
+	int res;
+
+	if (IS_ERR_OR_NULL(adap))
+		return 0;
+
+	if (WARN_ON(!parent))
+		return -EINVAL;
+
+	adap->owner = parent->driver->owner;
+	adap->devnode.dev.parent = parent;
+
+#ifdef CONFIG_MEDIA_CEC_RC
+	if (adap->capabilities & CEC_CAP_RC) {
+		adap->rc->dev.parent = parent;
+		res = rc_register_device(adap->rc);
+
+		if (res) {
+			pr_err("cec-%s: failed to prepare input device\n",
+			       adap->name);
+			rc_free_device(adap->rc);
+			adap->rc = NULL;
+			return res;
+		}
+	}
+#endif
+
+	res = cec_devnode_register(&adap->devnode, adap->owner);
+	if (res) {
+#ifdef CONFIG_MEDIA_CEC_RC
+		/* Note: rc_unregister also calls rc_free */
+		rc_unregister_device(adap->rc);
+		adap->rc = NULL;
+#endif
+		return res;
+	}
+
+	dev_set_drvdata(&adap->devnode.dev, adap);
+#ifdef CONFIG_DEBUG_FS
+	if (!top_cec_dir)
+		return 0;
+
+	adap->cec_dir = debugfs_create_dir(dev_name(&adap->devnode.dev), top_cec_dir);
+	if (IS_ERR_OR_NULL(adap->cec_dir)) {
+		pr_warn("cec-%s: Failed to create debugfs dir\n", adap->name);
+		return 0;
+	}
+	adap->status_file = debugfs_create_devm_seqfile(&adap->devnode.dev,
+		"status", adap->cec_dir, cec_adap_status);
+	if (IS_ERR_OR_NULL(adap->status_file)) {
+		pr_warn("cec-%s: Failed to create status file\n", adap->name);
+		debugfs_remove_recursive(adap->cec_dir);
+		adap->cec_dir = NULL;
+		return 0;
+	}
+	if (!adap->ops->error_inj_show || !adap->ops->error_inj_parse_line)
+		return 0;
+	adap->error_inj_file = debugfs_create_file("error-inj", 0644,
+						   adap->cec_dir, adap,
+						   &cec_error_inj_fops);
+	if (IS_ERR_OR_NULL(adap->error_inj_file))
+		pr_warn("cec-%s: Failed to create error-inj file\n",
+			adap->name);
+#endif
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cec_register_adapter);
+
+void cec_unregister_adapter(struct cec_adapter *adap)
+{
+	if (IS_ERR_OR_NULL(adap))
+		return;
+
+#ifdef CONFIG_MEDIA_CEC_RC
+	/* Note: rc_unregister also calls rc_free */
+	rc_unregister_device(adap->rc);
+	adap->rc = NULL;
+#endif
+	debugfs_remove_recursive(adap->cec_dir);
+#ifdef CONFIG_CEC_NOTIFIER
+	cec_notifier_cec_adap_unregister(adap->notifier, adap);
+#endif
+	cec_devnode_unregister(adap);
+}
+EXPORT_SYMBOL_GPL(cec_unregister_adapter);
+
+void cec_delete_adapter(struct cec_adapter *adap)
+{
+	if (IS_ERR_OR_NULL(adap))
+		return;
+	kthread_stop(adap->kthread);
+	if (adap->kthread_config)
+		kthread_stop(adap->kthread_config);
+	if (adap->ops->adap_free)
+		adap->ops->adap_free(adap);
+#ifdef CONFIG_MEDIA_CEC_RC
+	rc_free_device(adap->rc);
+#endif
+	kfree(adap);
+}
+EXPORT_SYMBOL_GPL(cec_delete_adapter);
+
+/*
+ *	Initialise cec for linux
+ */
+static int __init cec_devnode_init(void)
+{
+	int ret = alloc_chrdev_region(&cec_dev_t, 0, CEC_NUM_DEVICES, CEC_NAME);
+
+	if (ret < 0) {
+		pr_warn("cec: unable to allocate major\n");
+		return ret;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	top_cec_dir = debugfs_create_dir("cec", NULL);
+	if (IS_ERR_OR_NULL(top_cec_dir)) {
+		pr_warn("cec: Failed to create debugfs cec dir\n");
+		top_cec_dir = NULL;
+	}
+#endif
+
+	ret = bus_register(&cec_bus_type);
+	if (ret < 0) {
+		unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
+		pr_warn("cec: bus_register failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void __exit cec_devnode_exit(void)
+{
+	debugfs_remove_recursive(top_cec_dir);
+	bus_unregister(&cec_bus_type);
+	unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
+}
+
+subsys_initcall(cec_devnode_init);
+module_exit(cec_devnode_exit)
+
+MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
+MODULE_DESCRIPTION("Device node registration for cec drivers");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/cec/core/cec-notifier.c b/drivers/media/cec/core/cec-notifier.c
new file mode 100644
index 000000000000..517e0035fc99
--- /dev/null
+++ b/drivers/media/cec/core/cec-notifier.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cec-notifier.c - notify CEC drivers of physical address changes
+ *
+ * Copyright 2016 Russell King.
+ * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/export.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/kref.h>
+#include <linux/of_platform.h>
+
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+#include <drm/drm_edid.h>
+
+struct cec_notifier {
+	struct mutex lock;
+	struct list_head head;
+	struct kref kref;
+	struct device *hdmi_dev;
+	struct cec_connector_info conn_info;
+	const char *port_name;
+	struct cec_adapter *cec_adap;
+
+	u16 phys_addr;
+};
+
+static LIST_HEAD(cec_notifiers);
+static DEFINE_MUTEX(cec_notifiers_lock);
+
+/**
+ * cec_notifier_get_conn - find or create a new cec_notifier for the given
+ * device and connector tuple.
+ * @hdmi_dev: device that sends the events.
+ * @port_name: the connector name from which the event occurs
+ *
+ * If a notifier for device @dev already exists, then increase the refcount
+ * and return that notifier.
+ *
+ * If it doesn't exist, then allocate a new notifier struct and return a
+ * pointer to that new struct.
+ *
+ * Return NULL if the memory could not be allocated.
+ */
+static struct cec_notifier *
+cec_notifier_get_conn(struct device *hdmi_dev, const char *port_name)
+{
+	struct cec_notifier *n;
+
+	mutex_lock(&cec_notifiers_lock);
+	list_for_each_entry(n, &cec_notifiers, head) {
+		if (n->hdmi_dev == hdmi_dev &&
+		    (!port_name ||
+		     (n->port_name && !strcmp(n->port_name, port_name)))) {
+			kref_get(&n->kref);
+			mutex_unlock(&cec_notifiers_lock);
+			return n;
+		}
+	}
+	n = kzalloc(sizeof(*n), GFP_KERNEL);
+	if (!n)
+		goto unlock;
+	n->hdmi_dev = hdmi_dev;
+	if (port_name) {
+		n->port_name = kstrdup(port_name, GFP_KERNEL);
+		if (!n->port_name) {
+			kfree(n);
+			n = NULL;
+			goto unlock;
+		}
+	}
+	n->phys_addr = CEC_PHYS_ADDR_INVALID;
+
+	mutex_init(&n->lock);
+	kref_init(&n->kref);
+	list_add_tail(&n->head, &cec_notifiers);
+unlock:
+	mutex_unlock(&cec_notifiers_lock);
+	return n;
+}
+
+static void cec_notifier_release(struct kref *kref)
+{
+	struct cec_notifier *n =
+		container_of(kref, struct cec_notifier, kref);
+
+	list_del(&n->head);
+	kfree(n->port_name);
+	kfree(n);
+}
+
+static void cec_notifier_put(struct cec_notifier *n)
+{
+	mutex_lock(&cec_notifiers_lock);
+	kref_put(&n->kref, cec_notifier_release);
+	mutex_unlock(&cec_notifiers_lock);
+}
+
+struct cec_notifier *
+cec_notifier_conn_register(struct device *hdmi_dev, const char *port_name,
+			   const struct cec_connector_info *conn_info)
+{
+	struct cec_notifier *n = cec_notifier_get_conn(hdmi_dev, port_name);
+
+	if (!n)
+		return n;
+
+	mutex_lock(&n->lock);
+	n->phys_addr = CEC_PHYS_ADDR_INVALID;
+	if (conn_info)
+		n->conn_info = *conn_info;
+	else
+		memset(&n->conn_info, 0, sizeof(n->conn_info));
+	if (n->cec_adap) {
+		cec_phys_addr_invalidate(n->cec_adap);
+		cec_s_conn_info(n->cec_adap, conn_info);
+	}
+	mutex_unlock(&n->lock);
+	return n;
+}
+EXPORT_SYMBOL_GPL(cec_notifier_conn_register);
+
+void cec_notifier_conn_unregister(struct cec_notifier *n)
+{
+	if (!n)
+		return;
+
+	mutex_lock(&n->lock);
+	memset(&n->conn_info, 0, sizeof(n->conn_info));
+	n->phys_addr = CEC_PHYS_ADDR_INVALID;
+	if (n->cec_adap) {
+		cec_phys_addr_invalidate(n->cec_adap);
+		cec_s_conn_info(n->cec_adap, NULL);
+	}
+	mutex_unlock(&n->lock);
+	cec_notifier_put(n);
+}
+EXPORT_SYMBOL_GPL(cec_notifier_conn_unregister);
+
+struct cec_notifier *
+cec_notifier_cec_adap_register(struct device *hdmi_dev, const char *port_name,
+			       struct cec_adapter *adap)
+{
+	struct cec_notifier *n;
+
+	if (WARN_ON(!adap))
+		return NULL;
+
+	n = cec_notifier_get_conn(hdmi_dev, port_name);
+	if (!n)
+		return n;
+
+	mutex_lock(&n->lock);
+	n->cec_adap = adap;
+	adap->conn_info = n->conn_info;
+	adap->notifier = n;
+	cec_s_phys_addr(adap, n->phys_addr, false);
+	mutex_unlock(&n->lock);
+	return n;
+}
+EXPORT_SYMBOL_GPL(cec_notifier_cec_adap_register);
+
+void cec_notifier_cec_adap_unregister(struct cec_notifier *n,
+				      struct cec_adapter *adap)
+{
+	if (!n)
+		return;
+
+	mutex_lock(&n->lock);
+	adap->notifier = NULL;
+	n->cec_adap = NULL;
+	mutex_unlock(&n->lock);
+	cec_notifier_put(n);
+}
+EXPORT_SYMBOL_GPL(cec_notifier_cec_adap_unregister);
+
+void cec_notifier_set_phys_addr(struct cec_notifier *n, u16 pa)
+{
+	if (n == NULL)
+		return;
+
+	mutex_lock(&n->lock);
+	n->phys_addr = pa;
+	if (n->cec_adap)
+		cec_s_phys_addr(n->cec_adap, n->phys_addr, false);
+	mutex_unlock(&n->lock);
+}
+EXPORT_SYMBOL_GPL(cec_notifier_set_phys_addr);
+
+void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n,
+					  const struct edid *edid)
+{
+	u16 pa = CEC_PHYS_ADDR_INVALID;
+
+	if (n == NULL)
+		return;
+
+	if (edid && edid->extensions)
+		pa = cec_get_edid_phys_addr((const u8 *)edid,
+				EDID_LENGTH * (edid->extensions + 1), NULL);
+	cec_notifier_set_phys_addr(n, pa);
+}
+EXPORT_SYMBOL_GPL(cec_notifier_set_phys_addr_from_edid);
+
+struct device *cec_notifier_parse_hdmi_phandle(struct device *dev)
+{
+	struct platform_device *hdmi_pdev;
+	struct device *hdmi_dev = NULL;
+	struct device_node *np;
+
+	np = of_parse_phandle(dev->of_node, "hdmi-phandle", 0);
+
+	if (!np) {
+		dev_err(dev, "Failed to find HDMI node in device tree\n");
+		return ERR_PTR(-ENODEV);
+	}
+	hdmi_pdev = of_find_device_by_node(np);
+	of_node_put(np);
+	if (hdmi_pdev) {
+		hdmi_dev = &hdmi_pdev->dev;
+		/*
+		 * Note that the device struct is only used as a key into the
+		 * cec_notifiers list, it is never actually accessed.
+		 * So we decrement the reference here so we don't leak
+		 * memory.
+		 */
+		put_device(hdmi_dev);
+		return hdmi_dev;
+	}
+	return ERR_PTR(-EPROBE_DEFER);
+}
+EXPORT_SYMBOL_GPL(cec_notifier_parse_hdmi_phandle);
diff --git a/drivers/media/cec/core/cec-pin-error-inj.c b/drivers/media/cec/core/cec-pin-error-inj.c
new file mode 100644
index 000000000000..c0088d3b8e3d
--- /dev/null
+++ b/drivers/media/cec/core/cec-pin-error-inj.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched/types.h>
+
+#include <media/cec-pin.h>
+#include "cec-pin-priv.h"
+
+struct cec_error_inj_cmd {
+	unsigned int mode_offset;
+	int arg_idx;
+	const char *cmd;
+};
+
+static const struct cec_error_inj_cmd cec_error_inj_cmds[] = {
+	{ CEC_ERROR_INJ_RX_NACK_OFFSET, -1, "rx-nack" },
+	{ CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET,
+	  CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX, "rx-low-drive" },
+	{ CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET, -1, "rx-add-byte" },
+	{ CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET, -1, "rx-remove-byte" },
+	{ CEC_ERROR_INJ_RX_ARB_LOST_OFFSET,
+	  CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX, "rx-arb-lost" },
+
+	{ CEC_ERROR_INJ_TX_NO_EOM_OFFSET, -1, "tx-no-eom" },
+	{ CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET, -1, "tx-early-eom" },
+	{ CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET,
+	  CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX, "tx-add-bytes" },
+	{ CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET, -1, "tx-remove-byte" },
+	{ CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET,
+	  CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX, "tx-short-bit" },
+	{ CEC_ERROR_INJ_TX_LONG_BIT_OFFSET,
+	  CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX, "tx-long-bit" },
+	{ CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET,
+	  CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX, "tx-custom-bit" },
+	{ CEC_ERROR_INJ_TX_SHORT_START_OFFSET, -1, "tx-short-start" },
+	{ CEC_ERROR_INJ_TX_LONG_START_OFFSET, -1, "tx-long-start" },
+	{ CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET, -1, "tx-custom-start" },
+	{ CEC_ERROR_INJ_TX_LAST_BIT_OFFSET,
+	  CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX, "tx-last-bit" },
+	{ CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET,
+	  CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX, "tx-low-drive" },
+	{ 0, -1, NULL }
+};
+
+u16 cec_pin_rx_error_inj(struct cec_pin *pin)
+{
+	u16 cmd = CEC_ERROR_INJ_OP_ANY;
+
+	/* Only when 18 bits have been received do we have a valid cmd */
+	if (!(pin->error_inj[cmd] & CEC_ERROR_INJ_RX_MASK) &&
+	    pin->rx_bit >= 18)
+		cmd = pin->rx_msg.msg[1];
+	return (pin->error_inj[cmd] & CEC_ERROR_INJ_RX_MASK) ? cmd :
+		CEC_ERROR_INJ_OP_ANY;
+}
+
+u16 cec_pin_tx_error_inj(struct cec_pin *pin)
+{
+	u16 cmd = CEC_ERROR_INJ_OP_ANY;
+
+	if (!(pin->error_inj[cmd] & CEC_ERROR_INJ_TX_MASK) &&
+	    pin->tx_msg.len > 1)
+		cmd = pin->tx_msg.msg[1];
+	return (pin->error_inj[cmd] & CEC_ERROR_INJ_TX_MASK) ? cmd :
+		CEC_ERROR_INJ_OP_ANY;
+}
+
+bool cec_pin_error_inj_parse_line(struct cec_adapter *adap, char *line)
+{
+	static const char *delims = " \t\r";
+	struct cec_pin *pin = adap->pin;
+	unsigned int i;
+	bool has_pos = false;
+	char *p = line;
+	char *token;
+	char *comma;
+	u64 *error;
+	u8 *args;
+	bool has_op;
+	u8 op;
+	u8 mode;
+	u8 pos;
+
+	p = skip_spaces(p);
+	token = strsep(&p, delims);
+	if (!strcmp(token, "clear")) {
+		memset(pin->error_inj, 0, sizeof(pin->error_inj));
+		pin->rx_toggle = pin->tx_toggle = false;
+		pin->tx_ignore_nack_until_eom = false;
+		pin->tx_custom_pulse = false;
+		pin->tx_custom_low_usecs = CEC_TIM_CUSTOM_DEFAULT;
+		pin->tx_custom_high_usecs = CEC_TIM_CUSTOM_DEFAULT;
+		return true;
+	}
+	if (!strcmp(token, "rx-clear")) {
+		for (i = 0; i <= CEC_ERROR_INJ_OP_ANY; i++)
+			pin->error_inj[i] &= ~CEC_ERROR_INJ_RX_MASK;
+		pin->rx_toggle = false;
+		return true;
+	}
+	if (!strcmp(token, "tx-clear")) {
+		for (i = 0; i <= CEC_ERROR_INJ_OP_ANY; i++)
+			pin->error_inj[i] &= ~CEC_ERROR_INJ_TX_MASK;
+		pin->tx_toggle = false;
+		pin->tx_ignore_nack_until_eom = false;
+		pin->tx_custom_pulse = false;
+		pin->tx_custom_low_usecs = CEC_TIM_CUSTOM_DEFAULT;
+		pin->tx_custom_high_usecs = CEC_TIM_CUSTOM_DEFAULT;
+		return true;
+	}
+	if (!strcmp(token, "tx-ignore-nack-until-eom")) {
+		pin->tx_ignore_nack_until_eom = true;
+		return true;
+	}
+	if (!strcmp(token, "tx-custom-pulse")) {
+		pin->tx_custom_pulse = true;
+		cec_pin_start_timer(pin);
+		return true;
+	}
+	if (!p)
+		return false;
+
+	p = skip_spaces(p);
+	if (!strcmp(token, "tx-custom-low-usecs")) {
+		u32 usecs;
+
+		if (kstrtou32(p, 0, &usecs) || usecs > 10000000)
+			return false;
+		pin->tx_custom_low_usecs = usecs;
+		return true;
+	}
+	if (!strcmp(token, "tx-custom-high-usecs")) {
+		u32 usecs;
+
+		if (kstrtou32(p, 0, &usecs) || usecs > 10000000)
+			return false;
+		pin->tx_custom_high_usecs = usecs;
+		return true;
+	}
+
+	comma = strchr(token, ',');
+	if (comma)
+		*comma++ = '\0';
+	if (!strcmp(token, "any")) {
+		has_op = false;
+		error = pin->error_inj + CEC_ERROR_INJ_OP_ANY;
+		args = pin->error_inj_args[CEC_ERROR_INJ_OP_ANY];
+	} else if (!kstrtou8(token, 0, &op)) {
+		has_op = true;
+		error = pin->error_inj + op;
+		args = pin->error_inj_args[op];
+	} else {
+		return false;
+	}
+
+	mode = CEC_ERROR_INJ_MODE_ONCE;
+	if (comma) {
+		if (!strcmp(comma, "off"))
+			mode = CEC_ERROR_INJ_MODE_OFF;
+		else if (!strcmp(comma, "once"))
+			mode = CEC_ERROR_INJ_MODE_ONCE;
+		else if (!strcmp(comma, "always"))
+			mode = CEC_ERROR_INJ_MODE_ALWAYS;
+		else if (!strcmp(comma, "toggle"))
+			mode = CEC_ERROR_INJ_MODE_TOGGLE;
+		else
+			return false;
+	}
+
+	token = strsep(&p, delims);
+	if (p) {
+		p = skip_spaces(p);
+		has_pos = !kstrtou8(p, 0, &pos);
+	}
+
+	if (!strcmp(token, "clear")) {
+		*error = 0;
+		return true;
+	}
+	if (!strcmp(token, "rx-clear")) {
+		*error &= ~CEC_ERROR_INJ_RX_MASK;
+		return true;
+	}
+	if (!strcmp(token, "tx-clear")) {
+		*error &= ~CEC_ERROR_INJ_TX_MASK;
+		return true;
+	}
+
+	for (i = 0; cec_error_inj_cmds[i].cmd; i++) {
+		const char *cmd = cec_error_inj_cmds[i].cmd;
+		unsigned int mode_offset;
+		u64 mode_mask;
+		int arg_idx;
+		bool is_bit_pos = true;
+
+		if (strcmp(token, cmd))
+			continue;
+
+		mode_offset = cec_error_inj_cmds[i].mode_offset;
+		mode_mask = CEC_ERROR_INJ_MODE_MASK << mode_offset;
+		arg_idx = cec_error_inj_cmds[i].arg_idx;
+
+		if (mode_offset == CEC_ERROR_INJ_RX_ARB_LOST_OFFSET) {
+			if (has_op)
+				return false;
+			if (!has_pos)
+				pos = 0x0f;
+			is_bit_pos = false;
+		} else if (mode_offset == CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET) {
+			if (!has_pos || !pos)
+				return false;
+			is_bit_pos = false;
+		}
+
+		if (arg_idx >= 0 && is_bit_pos) {
+			if (!has_pos || pos >= 160)
+				return false;
+			if (has_op && pos < 10 + 8)
+				return false;
+			/* Invalid bit position may not be the Ack bit */
+			if ((mode_offset == CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET ||
+			     mode_offset == CEC_ERROR_INJ_TX_LONG_BIT_OFFSET ||
+			     mode_offset == CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET) &&
+			    (pos % 10) == 9)
+				return false;
+		}
+		*error &= ~mode_mask;
+		*error |= (u64)mode << mode_offset;
+		if (arg_idx >= 0)
+			args[arg_idx] = pos;
+		return true;
+	}
+	return false;
+}
+
+static void cec_pin_show_cmd(struct seq_file *sf, u32 cmd, u8 mode)
+{
+	if (cmd == CEC_ERROR_INJ_OP_ANY)
+		seq_puts(sf, "any,");
+	else
+		seq_printf(sf, "0x%02x,", cmd);
+	switch (mode) {
+	case CEC_ERROR_INJ_MODE_ONCE:
+		seq_puts(sf, "once ");
+		break;
+	case CEC_ERROR_INJ_MODE_ALWAYS:
+		seq_puts(sf, "always ");
+		break;
+	case CEC_ERROR_INJ_MODE_TOGGLE:
+		seq_puts(sf, "toggle ");
+		break;
+	default:
+		seq_puts(sf, "off ");
+		break;
+	}
+}
+
+int cec_pin_error_inj_show(struct cec_adapter *adap, struct seq_file *sf)
+{
+	struct cec_pin *pin = adap->pin;
+	unsigned int i, j;
+
+	seq_puts(sf, "# Clear error injections:\n");
+	seq_puts(sf, "#   clear          clear all rx and tx error injections\n");
+	seq_puts(sf, "#   rx-clear       clear all rx error injections\n");
+	seq_puts(sf, "#   tx-clear       clear all tx error injections\n");
+	seq_puts(sf, "#   <op> clear     clear all rx and tx error injections for <op>\n");
+	seq_puts(sf, "#   <op> rx-clear  clear all rx error injections for <op>\n");
+	seq_puts(sf, "#   <op> tx-clear  clear all tx error injections for <op>\n");
+	seq_puts(sf, "#\n");
+	seq_puts(sf, "# RX error injection:\n");
+	seq_puts(sf, "#   <op>[,<mode>] rx-nack              NACK the message instead of sending an ACK\n");
+	seq_puts(sf, "#   <op>[,<mode>] rx-low-drive <bit>   force a low-drive condition at this bit position\n");
+	seq_puts(sf, "#   <op>[,<mode>] rx-add-byte          add a spurious byte to the received CEC message\n");
+	seq_puts(sf, "#   <op>[,<mode>] rx-remove-byte       remove the last byte from the received CEC message\n");
+	seq_puts(sf, "#   <op>[,<mode>] rx-arb-lost <poll>   generate a POLL message to trigger an arbitration lost\n");
+	seq_puts(sf, "#\n");
+	seq_puts(sf, "# TX error injection settings:\n");
+	seq_puts(sf, "#   tx-ignore-nack-until-eom           ignore early NACKs until EOM\n");
+	seq_puts(sf, "#   tx-custom-low-usecs <usecs>        define the 'low' time for the custom pulse\n");
+	seq_puts(sf, "#   tx-custom-high-usecs <usecs>       define the 'high' time for the custom pulse\n");
+	seq_puts(sf, "#   tx-custom-pulse                    transmit the custom pulse once the bus is idle\n");
+	seq_puts(sf, "#\n");
+	seq_puts(sf, "# TX error injection:\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-no-eom            don't set the EOM bit\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-early-eom         set the EOM bit one byte too soon\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-add-bytes <num>   append <num> (1-255) spurious bytes to the message\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-remove-byte       drop the last byte from the message\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-short-bit <bit>   make this bit shorter than allowed\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-long-bit <bit>    make this bit longer than allowed\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-custom-bit <bit>  send the custom pulse instead of this bit\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-short-start       send a start pulse that's too short\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-long-start        send a start pulse that's too long\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-custom-start      send the custom pulse instead of the start pulse\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-last-bit <bit>    stop sending after this bit\n");
+	seq_puts(sf, "#   <op>[,<mode>] tx-low-drive <bit>   force a low-drive condition at this bit position\n");
+	seq_puts(sf, "#\n");
+	seq_puts(sf, "# <op>       CEC message opcode (0-255) or 'any'\n");
+	seq_puts(sf, "# <mode>     'once' (default), 'always', 'toggle' or 'off'\n");
+	seq_puts(sf, "# <bit>      CEC message bit (0-159)\n");
+	seq_puts(sf, "#            10 bits per 'byte': bits 0-7: data, bit 8: EOM, bit 9: ACK\n");
+	seq_puts(sf, "# <poll>     CEC poll message used to test arbitration lost (0x00-0xff, default 0x0f)\n");
+	seq_puts(sf, "# <usecs>    microseconds (0-10000000, default 1000)\n");
+
+	seq_puts(sf, "\nclear\n");
+
+	for (i = 0; i < ARRAY_SIZE(pin->error_inj); i++) {
+		u64 e = pin->error_inj[i];
+
+		for (j = 0; cec_error_inj_cmds[j].cmd; j++) {
+			const char *cmd = cec_error_inj_cmds[j].cmd;
+			unsigned int mode;
+			unsigned int mode_offset;
+			int arg_idx;
+
+			mode_offset = cec_error_inj_cmds[j].mode_offset;
+			arg_idx = cec_error_inj_cmds[j].arg_idx;
+			mode = (e >> mode_offset) & CEC_ERROR_INJ_MODE_MASK;
+			if (!mode)
+				continue;
+			cec_pin_show_cmd(sf, i, mode);
+			seq_puts(sf, cmd);
+			if (arg_idx >= 0)
+				seq_printf(sf, " %u",
+					   pin->error_inj_args[i][arg_idx]);
+			seq_puts(sf, "\n");
+		}
+	}
+
+	if (pin->tx_ignore_nack_until_eom)
+		seq_puts(sf, "tx-ignore-nack-until-eom\n");
+	if (pin->tx_custom_pulse)
+		seq_puts(sf, "tx-custom-pulse\n");
+	if (pin->tx_custom_low_usecs != CEC_TIM_CUSTOM_DEFAULT)
+		seq_printf(sf, "tx-custom-low-usecs %u\n",
+			   pin->tx_custom_low_usecs);
+	if (pin->tx_custom_high_usecs != CEC_TIM_CUSTOM_DEFAULT)
+		seq_printf(sf, "tx-custom-high-usecs %u\n",
+			   pin->tx_custom_high_usecs);
+	return 0;
+}
diff --git a/drivers/media/cec/core/cec-pin-priv.h b/drivers/media/cec/core/cec-pin-priv.h
new file mode 100644
index 000000000000..f423db8855d9
--- /dev/null
+++ b/drivers/media/cec/core/cec-pin-priv.h
@@ -0,0 +1,241 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * cec-pin-priv.h - internal cec-pin header
+ *
+ * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef LINUX_CEC_PIN_PRIV_H
+#define LINUX_CEC_PIN_PRIV_H
+
+#include <linux/types.h>
+#include <linux/atomic.h>
+#include <media/cec-pin.h>
+
+enum cec_pin_state {
+	/* CEC is off */
+	CEC_ST_OFF,
+	/* CEC is idle, waiting for Rx or Tx */
+	CEC_ST_IDLE,
+
+	/* Tx states */
+
+	/* Pending Tx, waiting for Signal Free Time to expire */
+	CEC_ST_TX_WAIT,
+	/* Low-drive was detected, wait for bus to go high */
+	CEC_ST_TX_WAIT_FOR_HIGH,
+	/* Drive CEC low for the start bit */
+	CEC_ST_TX_START_BIT_LOW,
+	/* Drive CEC high for the start bit */
+	CEC_ST_TX_START_BIT_HIGH,
+	/* Generate a start bit period that is too short */
+	CEC_ST_TX_START_BIT_HIGH_SHORT,
+	/* Generate a start bit period that is too long */
+	CEC_ST_TX_START_BIT_HIGH_LONG,
+	/* Drive CEC low for the start bit using the custom timing */
+	CEC_ST_TX_START_BIT_LOW_CUSTOM,
+	/* Drive CEC high for the start bit using the custom timing */
+	CEC_ST_TX_START_BIT_HIGH_CUSTOM,
+	/* Drive CEC low for the 0 bit */
+	CEC_ST_TX_DATA_BIT_0_LOW,
+	/* Drive CEC high for the 0 bit */
+	CEC_ST_TX_DATA_BIT_0_HIGH,
+	/* Generate a bit period that is too short */
+	CEC_ST_TX_DATA_BIT_0_HIGH_SHORT,
+	/* Generate a bit period that is too long */
+	CEC_ST_TX_DATA_BIT_0_HIGH_LONG,
+	/* Drive CEC low for the 1 bit */
+	CEC_ST_TX_DATA_BIT_1_LOW,
+	/* Drive CEC high for the 1 bit */
+	CEC_ST_TX_DATA_BIT_1_HIGH,
+	/* Generate a bit period that is too short */
+	CEC_ST_TX_DATA_BIT_1_HIGH_SHORT,
+	/* Generate a bit period that is too long */
+	CEC_ST_TX_DATA_BIT_1_HIGH_LONG,
+	/*
+	 * Wait for start of sample time to check for Ack bit or first
+	 * four initiator bits to check for Arbitration Lost.
+	 */
+	CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE,
+	/* Wait for end of bit period after sampling */
+	CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE,
+	/* Generate a bit period that is too short */
+	CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT,
+	/* Generate a bit period that is too long */
+	CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG,
+	/* Drive CEC low for a data bit using the custom timing */
+	CEC_ST_TX_DATA_BIT_LOW_CUSTOM,
+	/* Drive CEC high for a data bit using the custom timing */
+	CEC_ST_TX_DATA_BIT_HIGH_CUSTOM,
+	/* Drive CEC low for a standalone pulse using the custom timing */
+	CEC_ST_TX_PULSE_LOW_CUSTOM,
+	/* Drive CEC high for a standalone pulse using the custom timing */
+	CEC_ST_TX_PULSE_HIGH_CUSTOM,
+	/* Start low drive */
+	CEC_ST_TX_LOW_DRIVE,
+
+	/* Rx states */
+
+	/* Start bit low detected */
+	CEC_ST_RX_START_BIT_LOW,
+	/* Start bit high detected */
+	CEC_ST_RX_START_BIT_HIGH,
+	/* Wait for bit sample time */
+	CEC_ST_RX_DATA_SAMPLE,
+	/* Wait for earliest end of bit period after sampling */
+	CEC_ST_RX_DATA_POST_SAMPLE,
+	/* Wait for CEC to go low (i.e. end of bit period) */
+	CEC_ST_RX_DATA_WAIT_FOR_LOW,
+	/* Drive CEC low to send 0 Ack bit */
+	CEC_ST_RX_ACK_LOW,
+	/* End of 0 Ack time, wait for earliest end of bit period */
+	CEC_ST_RX_ACK_LOW_POST,
+	/* Wait for CEC to go high (i.e. end of bit period */
+	CEC_ST_RX_ACK_HIGH_POST,
+	/* Wait for earliest end of bit period and end of message */
+	CEC_ST_RX_ACK_FINISH,
+	/* Start low drive */
+	CEC_ST_RX_LOW_DRIVE,
+
+	/* Monitor pin using interrupts */
+	CEC_ST_RX_IRQ,
+
+	/* Total number of pin states */
+	CEC_PIN_STATES
+};
+
+/* Error Injection */
+
+/* Error injection modes */
+#define CEC_ERROR_INJ_MODE_OFF				0
+#define CEC_ERROR_INJ_MODE_ONCE				1
+#define CEC_ERROR_INJ_MODE_ALWAYS			2
+#define CEC_ERROR_INJ_MODE_TOGGLE			3
+#define CEC_ERROR_INJ_MODE_MASK				3ULL
+
+/* Receive error injection options */
+#define CEC_ERROR_INJ_RX_NACK_OFFSET			0
+#define CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET		2
+#define CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET		4
+#define CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET		6
+#define CEC_ERROR_INJ_RX_ARB_LOST_OFFSET		8
+#define CEC_ERROR_INJ_RX_MASK				0xffffULL
+
+/* Transmit error injection options */
+#define CEC_ERROR_INJ_TX_NO_EOM_OFFSET			16
+#define CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET		18
+#define CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET		20
+#define CEC_ERROR_INJ_TX_LONG_BIT_OFFSET		22
+#define CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET		24
+#define CEC_ERROR_INJ_TX_SHORT_START_OFFSET		26
+#define CEC_ERROR_INJ_TX_LONG_START_OFFSET		28
+#define CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET		30
+#define CEC_ERROR_INJ_TX_LAST_BIT_OFFSET		32
+#define CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET		34
+#define CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET		36
+#define CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET		38
+#define CEC_ERROR_INJ_TX_MASK				0xffffffffffff0000ULL
+
+#define CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX		0
+#define CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX		1
+
+#define CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX		2
+#define CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX		3
+#define CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX		4
+#define CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX		5
+#define CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX		6
+#define CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX		7
+#define CEC_ERROR_INJ_NUM_ARGS				8
+
+/* Special CEC op values */
+#define CEC_ERROR_INJ_OP_ANY				0x00000100
+
+/* The default for the low/high time of the custom pulse */
+#define CEC_TIM_CUSTOM_DEFAULT				1000
+
+#define CEC_NUM_PIN_EVENTS				128
+#define CEC_PIN_EVENT_FL_IS_HIGH			(1 << 0)
+#define CEC_PIN_EVENT_FL_DROPPED			(1 << 1)
+
+#define CEC_PIN_IRQ_UNCHANGED	0
+#define CEC_PIN_IRQ_DISABLE	1
+#define CEC_PIN_IRQ_ENABLE	2
+
+struct cec_pin {
+	struct cec_adapter		*adap;
+	const struct cec_pin_ops	*ops;
+	struct task_struct		*kthread;
+	wait_queue_head_t		kthread_waitq;
+	struct hrtimer			timer;
+	ktime_t				ts;
+	unsigned int			wait_usecs;
+	u16				la_mask;
+	bool				enabled;
+	bool				monitor_all;
+	bool				rx_eom;
+	bool				enable_irq_failed;
+	enum cec_pin_state		state;
+	struct cec_msg			tx_msg;
+	u32				tx_bit;
+	bool				tx_nacked;
+	u32				tx_signal_free_time;
+	bool				tx_toggle;
+	struct cec_msg			rx_msg;
+	u32				rx_bit;
+	bool				rx_toggle;
+	u32				rx_start_bit_low_too_short_cnt;
+	u64				rx_start_bit_low_too_short_ts;
+	u32				rx_start_bit_low_too_short_delta;
+	u32				rx_start_bit_too_short_cnt;
+	u64				rx_start_bit_too_short_ts;
+	u32				rx_start_bit_too_short_delta;
+	u32				rx_start_bit_too_long_cnt;
+	u32				rx_data_bit_too_short_cnt;
+	u64				rx_data_bit_too_short_ts;
+	u32				rx_data_bit_too_short_delta;
+	u32				rx_data_bit_too_long_cnt;
+	u32				rx_low_drive_cnt;
+
+	struct cec_msg			work_rx_msg;
+	u8				work_tx_status;
+	ktime_t				work_tx_ts;
+	atomic_t			work_irq_change;
+	atomic_t			work_pin_num_events;
+	unsigned int			work_pin_events_wr;
+	unsigned int			work_pin_events_rd;
+	ktime_t				work_pin_ts[CEC_NUM_PIN_EVENTS];
+	u8				work_pin_events[CEC_NUM_PIN_EVENTS];
+	bool				work_pin_events_dropped;
+	u32				work_pin_events_dropped_cnt;
+	ktime_t				timer_ts;
+	u32				timer_cnt;
+	u32				timer_100ms_overruns;
+	u32				timer_300ms_overruns;
+	u32				timer_max_overrun;
+	u32				timer_sum_overrun;
+
+	u32				tx_custom_low_usecs;
+	u32				tx_custom_high_usecs;
+	bool				tx_ignore_nack_until_eom;
+	bool				tx_custom_pulse;
+	bool				tx_generated_poll;
+	bool				tx_post_eom;
+	u8				tx_extra_bytes;
+	u32				tx_low_drive_cnt;
+#ifdef CONFIG_CEC_PIN_ERROR_INJ
+	u64				error_inj[CEC_ERROR_INJ_OP_ANY + 1];
+	u8				error_inj_args[CEC_ERROR_INJ_OP_ANY + 1][CEC_ERROR_INJ_NUM_ARGS];
+#endif
+};
+
+void cec_pin_start_timer(struct cec_pin *pin);
+
+#ifdef CONFIG_CEC_PIN_ERROR_INJ
+bool cec_pin_error_inj_parse_line(struct cec_adapter *adap, char *line);
+int cec_pin_error_inj_show(struct cec_adapter *adap, struct seq_file *sf);
+
+u16 cec_pin_rx_error_inj(struct cec_pin *pin);
+u16 cec_pin_tx_error_inj(struct cec_pin *pin);
+#endif
+
+#endif
diff --git a/drivers/media/cec/core/cec-pin.c b/drivers/media/cec/core/cec-pin.c
new file mode 100644
index 000000000000..660fe111f540
--- /dev/null
+++ b/drivers/media/cec/core/cec-pin.c
@@ -0,0 +1,1345 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched/types.h>
+
+#include <media/cec-pin.h>
+#include "cec-pin-priv.h"
+
+/* All timings are in microseconds */
+
+/* start bit timings */
+#define CEC_TIM_START_BIT_LOW		3700
+#define CEC_TIM_START_BIT_LOW_MIN	3500
+#define CEC_TIM_START_BIT_LOW_MAX	3900
+#define CEC_TIM_START_BIT_TOTAL		4500
+#define CEC_TIM_START_BIT_TOTAL_MIN	4300
+#define CEC_TIM_START_BIT_TOTAL_MAX	4700
+
+/* data bit timings */
+#define CEC_TIM_DATA_BIT_0_LOW		1500
+#define CEC_TIM_DATA_BIT_0_LOW_MIN	1300
+#define CEC_TIM_DATA_BIT_0_LOW_MAX	1700
+#define CEC_TIM_DATA_BIT_1_LOW		600
+#define CEC_TIM_DATA_BIT_1_LOW_MIN	400
+#define CEC_TIM_DATA_BIT_1_LOW_MAX	800
+#define CEC_TIM_DATA_BIT_TOTAL		2400
+#define CEC_TIM_DATA_BIT_TOTAL_MIN	2050
+#define CEC_TIM_DATA_BIT_TOTAL_MAX	2750
+/* earliest safe time to sample the bit state */
+#define CEC_TIM_DATA_BIT_SAMPLE		850
+/* earliest time the bit is back to 1 (T7 + 50) */
+#define CEC_TIM_DATA_BIT_HIGH		1750
+
+/* when idle, sample once per millisecond */
+#define CEC_TIM_IDLE_SAMPLE		1000
+/* when processing the start bit, sample twice per millisecond */
+#define CEC_TIM_START_BIT_SAMPLE	500
+/* when polling for a state change, sample once every 50 microseconds */
+#define CEC_TIM_SAMPLE			50
+
+#define CEC_TIM_LOW_DRIVE_ERROR		(1.5 * CEC_TIM_DATA_BIT_TOTAL)
+
+/*
+ * Total data bit time that is too short/long for a valid bit,
+ * used for error injection.
+ */
+#define CEC_TIM_DATA_BIT_TOTAL_SHORT	1800
+#define CEC_TIM_DATA_BIT_TOTAL_LONG	2900
+
+/*
+ * Total start bit time that is too short/long for a valid bit,
+ * used for error injection.
+ */
+#define CEC_TIM_START_BIT_TOTAL_SHORT	4100
+#define CEC_TIM_START_BIT_TOTAL_LONG	5000
+
+/* Data bits are 0-7, EOM is bit 8 and ACK is bit 9 */
+#define EOM_BIT				8
+#define ACK_BIT				9
+
+struct cec_state {
+	const char * const name;
+	unsigned int usecs;
+};
+
+static const struct cec_state states[CEC_PIN_STATES] = {
+	{ "Off",		   0 },
+	{ "Idle",		   CEC_TIM_IDLE_SAMPLE },
+	{ "Tx Wait",		   CEC_TIM_SAMPLE },
+	{ "Tx Wait for High",	   CEC_TIM_IDLE_SAMPLE },
+	{ "Tx Start Bit Low",	   CEC_TIM_START_BIT_LOW },
+	{ "Tx Start Bit High",	   CEC_TIM_START_BIT_TOTAL - CEC_TIM_START_BIT_LOW },
+	{ "Tx Start Bit High Short", CEC_TIM_START_BIT_TOTAL_SHORT - CEC_TIM_START_BIT_LOW },
+	{ "Tx Start Bit High Long", CEC_TIM_START_BIT_TOTAL_LONG - CEC_TIM_START_BIT_LOW },
+	{ "Tx Start Bit Low Custom", 0 },
+	{ "Tx Start Bit High Custom", 0 },
+	{ "Tx Data 0 Low",	   CEC_TIM_DATA_BIT_0_LOW },
+	{ "Tx Data 0 High",	   CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_0_LOW },
+	{ "Tx Data 0 High Short",  CEC_TIM_DATA_BIT_TOTAL_SHORT - CEC_TIM_DATA_BIT_0_LOW },
+	{ "Tx Data 0 High Long",   CEC_TIM_DATA_BIT_TOTAL_LONG - CEC_TIM_DATA_BIT_0_LOW },
+	{ "Tx Data 1 Low",	   CEC_TIM_DATA_BIT_1_LOW },
+	{ "Tx Data 1 High",	   CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_1_LOW },
+	{ "Tx Data 1 High Short",  CEC_TIM_DATA_BIT_TOTAL_SHORT - CEC_TIM_DATA_BIT_1_LOW },
+	{ "Tx Data 1 High Long",   CEC_TIM_DATA_BIT_TOTAL_LONG - CEC_TIM_DATA_BIT_1_LOW },
+	{ "Tx Data 1 High Pre Sample", CEC_TIM_DATA_BIT_SAMPLE - CEC_TIM_DATA_BIT_1_LOW },
+	{ "Tx Data 1 High Post Sample", CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_SAMPLE },
+	{ "Tx Data 1 High Post Sample Short", CEC_TIM_DATA_BIT_TOTAL_SHORT - CEC_TIM_DATA_BIT_SAMPLE },
+	{ "Tx Data 1 High Post Sample Long", CEC_TIM_DATA_BIT_TOTAL_LONG - CEC_TIM_DATA_BIT_SAMPLE },
+	{ "Tx Data Bit Low Custom", 0 },
+	{ "Tx Data Bit High Custom", 0 },
+	{ "Tx Pulse Low Custom",   0 },
+	{ "Tx Pulse High Custom",  0 },
+	{ "Tx Low Drive",	   CEC_TIM_LOW_DRIVE_ERROR },
+	{ "Rx Start Bit Low",	   CEC_TIM_SAMPLE },
+	{ "Rx Start Bit High",	   CEC_TIM_SAMPLE },
+	{ "Rx Data Sample",	   CEC_TIM_DATA_BIT_SAMPLE },
+	{ "Rx Data Post Sample",   CEC_TIM_DATA_BIT_HIGH - CEC_TIM_DATA_BIT_SAMPLE },
+	{ "Rx Data Wait for Low",  CEC_TIM_SAMPLE },
+	{ "Rx Ack Low",		   CEC_TIM_DATA_BIT_0_LOW },
+	{ "Rx Ack Low Post",	   CEC_TIM_DATA_BIT_HIGH - CEC_TIM_DATA_BIT_0_LOW },
+	{ "Rx Ack High Post",	   CEC_TIM_DATA_BIT_HIGH },
+	{ "Rx Ack Finish",	   CEC_TIM_DATA_BIT_TOTAL_MIN - CEC_TIM_DATA_BIT_HIGH },
+	{ "Rx Low Drive",	   CEC_TIM_LOW_DRIVE_ERROR },
+	{ "Rx Irq",		   0 },
+};
+
+static void cec_pin_update(struct cec_pin *pin, bool v, bool force)
+{
+	if (!force && v == pin->adap->cec_pin_is_high)
+		return;
+
+	pin->adap->cec_pin_is_high = v;
+	if (atomic_read(&pin->work_pin_num_events) < CEC_NUM_PIN_EVENTS) {
+		u8 ev = v;
+
+		if (pin->work_pin_events_dropped) {
+			pin->work_pin_events_dropped = false;
+			ev |= CEC_PIN_EVENT_FL_DROPPED;
+		}
+		pin->work_pin_events[pin->work_pin_events_wr] = ev;
+		pin->work_pin_ts[pin->work_pin_events_wr] = ktime_get();
+		pin->work_pin_events_wr =
+			(pin->work_pin_events_wr + 1) % CEC_NUM_PIN_EVENTS;
+		atomic_inc(&pin->work_pin_num_events);
+	} else {
+		pin->work_pin_events_dropped = true;
+		pin->work_pin_events_dropped_cnt++;
+	}
+	wake_up_interruptible(&pin->kthread_waitq);
+}
+
+static bool cec_pin_read(struct cec_pin *pin)
+{
+	bool v = pin->ops->read(pin->adap);
+
+	cec_pin_update(pin, v, false);
+	return v;
+}
+
+static void cec_pin_low(struct cec_pin *pin)
+{
+	pin->ops->low(pin->adap);
+	cec_pin_update(pin, false, false);
+}
+
+static bool cec_pin_high(struct cec_pin *pin)
+{
+	pin->ops->high(pin->adap);
+	return cec_pin_read(pin);
+}
+
+static bool rx_error_inj(struct cec_pin *pin, unsigned int mode_offset,
+			 int arg_idx, u8 *arg)
+{
+#ifdef CONFIG_CEC_PIN_ERROR_INJ
+	u16 cmd = cec_pin_rx_error_inj(pin);
+	u64 e = pin->error_inj[cmd];
+	unsigned int mode = (e >> mode_offset) & CEC_ERROR_INJ_MODE_MASK;
+
+	if (arg_idx >= 0) {
+		u8 pos = pin->error_inj_args[cmd][arg_idx];
+
+		if (arg)
+			*arg = pos;
+		else if (pos != pin->rx_bit)
+			return false;
+	}
+
+	switch (mode) {
+	case CEC_ERROR_INJ_MODE_ONCE:
+		pin->error_inj[cmd] &=
+			~(CEC_ERROR_INJ_MODE_MASK << mode_offset);
+		return true;
+	case CEC_ERROR_INJ_MODE_ALWAYS:
+		return true;
+	case CEC_ERROR_INJ_MODE_TOGGLE:
+		return pin->rx_toggle;
+	default:
+		return false;
+	}
+#else
+	return false;
+#endif
+}
+
+static bool rx_nack(struct cec_pin *pin)
+{
+	return rx_error_inj(pin, CEC_ERROR_INJ_RX_NACK_OFFSET, -1, NULL);
+}
+
+static bool rx_low_drive(struct cec_pin *pin)
+{
+	return rx_error_inj(pin, CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET,
+			    CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX, NULL);
+}
+
+static bool rx_add_byte(struct cec_pin *pin)
+{
+	return rx_error_inj(pin, CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET, -1, NULL);
+}
+
+static bool rx_remove_byte(struct cec_pin *pin)
+{
+	return rx_error_inj(pin, CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET, -1, NULL);
+}
+
+static bool rx_arb_lost(struct cec_pin *pin, u8 *poll)
+{
+	return pin->tx_msg.len == 0 &&
+		rx_error_inj(pin, CEC_ERROR_INJ_RX_ARB_LOST_OFFSET,
+			     CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX, poll);
+}
+
+static bool tx_error_inj(struct cec_pin *pin, unsigned int mode_offset,
+			 int arg_idx, u8 *arg)
+{
+#ifdef CONFIG_CEC_PIN_ERROR_INJ
+	u16 cmd = cec_pin_tx_error_inj(pin);
+	u64 e = pin->error_inj[cmd];
+	unsigned int mode = (e >> mode_offset) & CEC_ERROR_INJ_MODE_MASK;
+
+	if (arg_idx >= 0) {
+		u8 pos = pin->error_inj_args[cmd][arg_idx];
+
+		if (arg)
+			*arg = pos;
+		else if (pos != pin->tx_bit)
+			return false;
+	}
+
+	switch (mode) {
+	case CEC_ERROR_INJ_MODE_ONCE:
+		pin->error_inj[cmd] &=
+			~(CEC_ERROR_INJ_MODE_MASK << mode_offset);
+		return true;
+	case CEC_ERROR_INJ_MODE_ALWAYS:
+		return true;
+	case CEC_ERROR_INJ_MODE_TOGGLE:
+		return pin->tx_toggle;
+	default:
+		return false;
+	}
+#else
+	return false;
+#endif
+}
+
+static bool tx_no_eom(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_NO_EOM_OFFSET, -1, NULL);
+}
+
+static bool tx_early_eom(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET, -1, NULL);
+}
+
+static bool tx_short_bit(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET,
+			    CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX, NULL);
+}
+
+static bool tx_long_bit(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_LONG_BIT_OFFSET,
+			    CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX, NULL);
+}
+
+static bool tx_custom_bit(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET,
+			    CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX, NULL);
+}
+
+static bool tx_short_start(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_SHORT_START_OFFSET, -1, NULL);
+}
+
+static bool tx_long_start(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_LONG_START_OFFSET, -1, NULL);
+}
+
+static bool tx_custom_start(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET,
+			    -1, NULL);
+}
+
+static bool tx_last_bit(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_LAST_BIT_OFFSET,
+			    CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX, NULL);
+}
+
+static u8 tx_add_bytes(struct cec_pin *pin)
+{
+	u8 bytes;
+
+	if (tx_error_inj(pin, CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET,
+			 CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX, &bytes))
+		return bytes;
+	return 0;
+}
+
+static bool tx_remove_byte(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET, -1, NULL);
+}
+
+static bool tx_low_drive(struct cec_pin *pin)
+{
+	return tx_error_inj(pin, CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET,
+			    CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX, NULL);
+}
+
+static void cec_pin_to_idle(struct cec_pin *pin)
+{
+	/*
+	 * Reset all status fields, release the bus and
+	 * go to idle state.
+	 */
+	pin->rx_bit = pin->tx_bit = 0;
+	pin->rx_msg.len = 0;
+	memset(pin->rx_msg.msg, 0, sizeof(pin->rx_msg.msg));
+	pin->ts = ns_to_ktime(0);
+	pin->tx_generated_poll = false;
+	pin->tx_post_eom = false;
+	if (pin->state >= CEC_ST_TX_WAIT &&
+	    pin->state <= CEC_ST_TX_LOW_DRIVE)
+		pin->tx_toggle ^= 1;
+	if (pin->state >= CEC_ST_RX_START_BIT_LOW &&
+	    pin->state <= CEC_ST_RX_LOW_DRIVE)
+		pin->rx_toggle ^= 1;
+	pin->state = CEC_ST_IDLE;
+}
+
+/*
+ * Handle Transmit-related states
+ *
+ * Basic state changes when transmitting:
+ *
+ * Idle -> Tx Wait (waiting for the end of signal free time) ->
+ *	Tx Start Bit Low -> Tx Start Bit High ->
+ *
+ *   Regular data bits + EOM:
+ *	Tx Data 0 Low -> Tx Data 0 High ->
+ *   or:
+ *	Tx Data 1 Low -> Tx Data 1 High ->
+ *
+ *   First 4 data bits or Ack bit:
+ *	Tx Data 0 Low -> Tx Data 0 High ->
+ *   or:
+ *	Tx Data 1 Low -> Tx Data 1 High -> Tx Data 1 Pre Sample ->
+ *		Tx Data 1 Post Sample ->
+ *
+ *   After the last Ack go to Idle.
+ *
+ * If it detects a Low Drive condition then:
+ *	Tx Wait For High -> Idle
+ *
+ * If it loses arbitration, then it switches to state Rx Data Post Sample.
+ */
+static void cec_pin_tx_states(struct cec_pin *pin, ktime_t ts)
+{
+	bool v;
+	bool is_ack_bit, ack;
+
+	switch (pin->state) {
+	case CEC_ST_TX_WAIT_FOR_HIGH:
+		if (cec_pin_read(pin))
+			cec_pin_to_idle(pin);
+		break;
+
+	case CEC_ST_TX_START_BIT_LOW:
+		if (tx_short_start(pin)) {
+			/*
+			 * Error Injection: send an invalid (too short)
+			 * start pulse.
+			 */
+			pin->state = CEC_ST_TX_START_BIT_HIGH_SHORT;
+		} else if (tx_long_start(pin)) {
+			/*
+			 * Error Injection: send an invalid (too long)
+			 * start pulse.
+			 */
+			pin->state = CEC_ST_TX_START_BIT_HIGH_LONG;
+		} else {
+			pin->state = CEC_ST_TX_START_BIT_HIGH;
+		}
+		/* Generate start bit */
+		cec_pin_high(pin);
+		break;
+
+	case CEC_ST_TX_START_BIT_LOW_CUSTOM:
+		pin->state = CEC_ST_TX_START_BIT_HIGH_CUSTOM;
+		/* Generate start bit */
+		cec_pin_high(pin);
+		break;
+
+	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG:
+		if (pin->tx_nacked) {
+			cec_pin_to_idle(pin);
+			pin->tx_msg.len = 0;
+			if (pin->tx_generated_poll)
+				break;
+			pin->work_tx_ts = ts;
+			pin->work_tx_status = CEC_TX_STATUS_NACK;
+			wake_up_interruptible(&pin->kthread_waitq);
+			break;
+		}
+		/* fall through */
+	case CEC_ST_TX_DATA_BIT_0_HIGH:
+	case CEC_ST_TX_DATA_BIT_0_HIGH_SHORT:
+	case CEC_ST_TX_DATA_BIT_0_HIGH_LONG:
+	case CEC_ST_TX_DATA_BIT_1_HIGH:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_SHORT:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_LONG:
+		/*
+		 * If the read value is 1, then all is OK, otherwise we have a
+		 * low drive condition.
+		 *
+		 * Special case: when we generate a poll message due to an
+		 * Arbitration Lost error injection, then ignore this since
+		 * the pin can actually be low in that case.
+		 */
+		if (!cec_pin_read(pin) && !pin->tx_generated_poll) {
+			/*
+			 * It's 0, so someone detected an error and pulled the
+			 * line low for 1.5 times the nominal bit period.
+			 */
+			pin->tx_msg.len = 0;
+			pin->state = CEC_ST_TX_WAIT_FOR_HIGH;
+			pin->work_tx_ts = ts;
+			pin->work_tx_status = CEC_TX_STATUS_LOW_DRIVE;
+			pin->tx_low_drive_cnt++;
+			wake_up_interruptible(&pin->kthread_waitq);
+			break;
+		}
+		/* fall through */
+	case CEC_ST_TX_DATA_BIT_HIGH_CUSTOM:
+		if (tx_last_bit(pin)) {
+			/* Error Injection: just stop sending after this bit */
+			cec_pin_to_idle(pin);
+			pin->tx_msg.len = 0;
+			if (pin->tx_generated_poll)
+				break;
+			pin->work_tx_ts = ts;
+			pin->work_tx_status = CEC_TX_STATUS_OK;
+			wake_up_interruptible(&pin->kthread_waitq);
+			break;
+		}
+		pin->tx_bit++;
+		/* fall through */
+	case CEC_ST_TX_START_BIT_HIGH:
+	case CEC_ST_TX_START_BIT_HIGH_SHORT:
+	case CEC_ST_TX_START_BIT_HIGH_LONG:
+	case CEC_ST_TX_START_BIT_HIGH_CUSTOM:
+		if (tx_low_drive(pin)) {
+			/* Error injection: go to low drive */
+			cec_pin_low(pin);
+			pin->state = CEC_ST_TX_LOW_DRIVE;
+			pin->tx_msg.len = 0;
+			if (pin->tx_generated_poll)
+				break;
+			pin->work_tx_ts = ts;
+			pin->work_tx_status = CEC_TX_STATUS_LOW_DRIVE;
+			pin->tx_low_drive_cnt++;
+			wake_up_interruptible(&pin->kthread_waitq);
+			break;
+		}
+		if (pin->tx_bit / 10 >= pin->tx_msg.len + pin->tx_extra_bytes) {
+			cec_pin_to_idle(pin);
+			pin->tx_msg.len = 0;
+			if (pin->tx_generated_poll)
+				break;
+			pin->work_tx_ts = ts;
+			pin->work_tx_status = CEC_TX_STATUS_OK;
+			wake_up_interruptible(&pin->kthread_waitq);
+			break;
+		}
+
+		switch (pin->tx_bit % 10) {
+		default: {
+			/*
+			 * In the CEC_ERROR_INJ_TX_ADD_BYTES case we transmit
+			 * extra bytes, so pin->tx_bit / 10 can become >= 16.
+			 * Generate bit values for those extra bytes instead
+			 * of reading them from the transmit buffer.
+			 */
+			unsigned int idx = (pin->tx_bit / 10);
+			u8 val = idx;
+
+			if (idx < pin->tx_msg.len)
+				val = pin->tx_msg.msg[idx];
+			v = val & (1 << (7 - (pin->tx_bit % 10)));
+
+			pin->state = v ? CEC_ST_TX_DATA_BIT_1_LOW :
+					 CEC_ST_TX_DATA_BIT_0_LOW;
+			break;
+		}
+		case EOM_BIT: {
+			unsigned int tot_len = pin->tx_msg.len +
+					       pin->tx_extra_bytes;
+			unsigned int tx_byte_idx = pin->tx_bit / 10;
+
+			v = !pin->tx_post_eom && tx_byte_idx == tot_len - 1;
+			if (tot_len > 1 && tx_byte_idx == tot_len - 2 &&
+			    tx_early_eom(pin)) {
+				/* Error injection: set EOM one byte early */
+				v = true;
+				pin->tx_post_eom = true;
+			} else if (v && tx_no_eom(pin)) {
+				/* Error injection: no EOM */
+				v = false;
+			}
+			pin->state = v ? CEC_ST_TX_DATA_BIT_1_LOW :
+					 CEC_ST_TX_DATA_BIT_0_LOW;
+			break;
+		}
+		case ACK_BIT:
+			pin->state = CEC_ST_TX_DATA_BIT_1_LOW;
+			break;
+		}
+		if (tx_custom_bit(pin))
+			pin->state = CEC_ST_TX_DATA_BIT_LOW_CUSTOM;
+		cec_pin_low(pin);
+		break;
+
+	case CEC_ST_TX_DATA_BIT_0_LOW:
+	case CEC_ST_TX_DATA_BIT_1_LOW:
+		v = pin->state == CEC_ST_TX_DATA_BIT_1_LOW;
+		is_ack_bit = pin->tx_bit % 10 == ACK_BIT;
+		if (v && (pin->tx_bit < 4 || is_ack_bit)) {
+			pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE;
+		} else if (!is_ack_bit && tx_short_bit(pin)) {
+			/* Error Injection: send an invalid (too short) bit */
+			pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH_SHORT :
+					 CEC_ST_TX_DATA_BIT_0_HIGH_SHORT;
+		} else if (!is_ack_bit && tx_long_bit(pin)) {
+			/* Error Injection: send an invalid (too long) bit */
+			pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH_LONG :
+					 CEC_ST_TX_DATA_BIT_0_HIGH_LONG;
+		} else {
+			pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH :
+					 CEC_ST_TX_DATA_BIT_0_HIGH;
+		}
+		cec_pin_high(pin);
+		break;
+
+	case CEC_ST_TX_DATA_BIT_LOW_CUSTOM:
+		pin->state = CEC_ST_TX_DATA_BIT_HIGH_CUSTOM;
+		cec_pin_high(pin);
+		break;
+
+	case CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE:
+		/* Read the CEC value at the sample time */
+		v = cec_pin_read(pin);
+		is_ack_bit = pin->tx_bit % 10 == ACK_BIT;
+		/*
+		 * If v == 0 and we're within the first 4 bits
+		 * of the initiator, then someone else started
+		 * transmitting and we lost the arbitration
+		 * (i.e. the logical address of the other
+		 * transmitter has more leading 0 bits in the
+		 * initiator).
+		 */
+		if (!v && !is_ack_bit && !pin->tx_generated_poll) {
+			pin->tx_msg.len = 0;
+			pin->work_tx_ts = ts;
+			pin->work_tx_status = CEC_TX_STATUS_ARB_LOST;
+			wake_up_interruptible(&pin->kthread_waitq);
+			pin->rx_bit = pin->tx_bit;
+			pin->tx_bit = 0;
+			memset(pin->rx_msg.msg, 0, sizeof(pin->rx_msg.msg));
+			pin->rx_msg.msg[0] = pin->tx_msg.msg[0];
+			pin->rx_msg.msg[0] &= (0xff << (8 - pin->rx_bit));
+			pin->rx_msg.len = 0;
+			pin->ts = ktime_sub_us(ts, CEC_TIM_DATA_BIT_SAMPLE);
+			pin->state = CEC_ST_RX_DATA_POST_SAMPLE;
+			pin->rx_bit++;
+			break;
+		}
+		pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE;
+		if (!is_ack_bit && tx_short_bit(pin)) {
+			/* Error Injection: send an invalid (too short) bit */
+			pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT;
+		} else if (!is_ack_bit && tx_long_bit(pin)) {
+			/* Error Injection: send an invalid (too long) bit */
+			pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG;
+		}
+		if (!is_ack_bit)
+			break;
+		/* Was the message ACKed? */
+		ack = cec_msg_is_broadcast(&pin->tx_msg) ? v : !v;
+		if (!ack && (!pin->tx_ignore_nack_until_eom ||
+		    pin->tx_bit / 10 == pin->tx_msg.len - 1) &&
+		    !pin->tx_post_eom) {
+			/*
+			 * Note: the CEC spec is ambiguous regarding
+			 * what action to take when a NACK appears
+			 * before the last byte of the payload was
+			 * transmitted: either stop transmitting
+			 * immediately, or wait until the last byte
+			 * was transmitted.
+			 *
+			 * Most CEC implementations appear to stop
+			 * immediately, and that's what we do here
+			 * as well.
+			 */
+			pin->tx_nacked = true;
+		}
+		break;
+
+	case CEC_ST_TX_PULSE_LOW_CUSTOM:
+		cec_pin_high(pin);
+		pin->state = CEC_ST_TX_PULSE_HIGH_CUSTOM;
+		break;
+
+	case CEC_ST_TX_PULSE_HIGH_CUSTOM:
+		cec_pin_to_idle(pin);
+		break;
+
+	default:
+		break;
+	}
+}
+
+/*
+ * Handle Receive-related states
+ *
+ * Basic state changes when receiving:
+ *
+ *	Rx Start Bit Low -> Rx Start Bit High ->
+ *   Regular data bits + EOM:
+ *	Rx Data Sample -> Rx Data Post Sample -> Rx Data High ->
+ *   Ack bit 0:
+ *	Rx Ack Low -> Rx Ack Low Post -> Rx Data High ->
+ *   Ack bit 1:
+ *	Rx Ack High Post -> Rx Data High ->
+ *   Ack bit 0 && EOM:
+ *	Rx Ack Low -> Rx Ack Low Post -> Rx Ack Finish -> Idle
+ */
+static void cec_pin_rx_states(struct cec_pin *pin, ktime_t ts)
+{
+	s32 delta;
+	bool v;
+	bool ack;
+	bool bcast, for_us;
+	u8 dest;
+	u8 poll;
+
+	switch (pin->state) {
+	/* Receive states */
+	case CEC_ST_RX_START_BIT_LOW:
+		v = cec_pin_read(pin);
+		if (!v)
+			break;
+		pin->state = CEC_ST_RX_START_BIT_HIGH;
+		delta = ktime_us_delta(ts, pin->ts);
+		/* Start bit low is too short, go back to idle */
+		if (delta < CEC_TIM_START_BIT_LOW_MIN - CEC_TIM_IDLE_SAMPLE) {
+			if (!pin->rx_start_bit_low_too_short_cnt++) {
+				pin->rx_start_bit_low_too_short_ts = ktime_to_ns(pin->ts);
+				pin->rx_start_bit_low_too_short_delta = delta;
+			}
+			cec_pin_to_idle(pin);
+			break;
+		}
+		if (rx_arb_lost(pin, &poll)) {
+			cec_msg_init(&pin->tx_msg, poll >> 4, poll & 0xf);
+			pin->tx_generated_poll = true;
+			pin->tx_extra_bytes = 0;
+			pin->state = CEC_ST_TX_START_BIT_HIGH;
+			pin->ts = ts;
+		}
+		break;
+
+	case CEC_ST_RX_START_BIT_HIGH:
+		v = cec_pin_read(pin);
+		delta = ktime_us_delta(ts, pin->ts);
+		/*
+		 * Unfortunately the spec does not specify when to give up
+		 * and go to idle. We just pick TOTAL_LONG.
+		 */
+		if (v && delta > CEC_TIM_START_BIT_TOTAL_LONG) {
+			pin->rx_start_bit_too_long_cnt++;
+			cec_pin_to_idle(pin);
+			break;
+		}
+		if (v)
+			break;
+		/* Start bit is too short, go back to idle */
+		if (delta < CEC_TIM_START_BIT_TOTAL_MIN - CEC_TIM_IDLE_SAMPLE) {
+			if (!pin->rx_start_bit_too_short_cnt++) {
+				pin->rx_start_bit_too_short_ts = ktime_to_ns(pin->ts);
+				pin->rx_start_bit_too_short_delta = delta;
+			}
+			cec_pin_to_idle(pin);
+			break;
+		}
+		if (rx_low_drive(pin)) {
+			/* Error injection: go to low drive */
+			cec_pin_low(pin);
+			pin->state = CEC_ST_RX_LOW_DRIVE;
+			pin->rx_low_drive_cnt++;
+			break;
+		}
+		pin->state = CEC_ST_RX_DATA_SAMPLE;
+		pin->ts = ts;
+		pin->rx_eom = false;
+		break;
+
+	case CEC_ST_RX_DATA_SAMPLE:
+		v = cec_pin_read(pin);
+		pin->state = CEC_ST_RX_DATA_POST_SAMPLE;
+		switch (pin->rx_bit % 10) {
+		default:
+			if (pin->rx_bit / 10 < CEC_MAX_MSG_SIZE)
+				pin->rx_msg.msg[pin->rx_bit / 10] |=
+					v << (7 - (pin->rx_bit % 10));
+			break;
+		case EOM_BIT:
+			pin->rx_eom = v;
+			pin->rx_msg.len = pin->rx_bit / 10 + 1;
+			break;
+		case ACK_BIT:
+			break;
+		}
+		pin->rx_bit++;
+		break;
+
+	case CEC_ST_RX_DATA_POST_SAMPLE:
+		pin->state = CEC_ST_RX_DATA_WAIT_FOR_LOW;
+		break;
+
+	case CEC_ST_RX_DATA_WAIT_FOR_LOW:
+		v = cec_pin_read(pin);
+		delta = ktime_us_delta(ts, pin->ts);
+		/*
+		 * Unfortunately the spec does not specify when to give up
+		 * and go to idle. We just pick TOTAL_LONG.
+		 */
+		if (v && delta > CEC_TIM_DATA_BIT_TOTAL_LONG) {
+			pin->rx_data_bit_too_long_cnt++;
+			cec_pin_to_idle(pin);
+			break;
+		}
+		if (v)
+			break;
+
+		if (rx_low_drive(pin)) {
+			/* Error injection: go to low drive */
+			cec_pin_low(pin);
+			pin->state = CEC_ST_RX_LOW_DRIVE;
+			pin->rx_low_drive_cnt++;
+			break;
+		}
+
+		/*
+		 * Go to low drive state when the total bit time is
+		 * too short.
+		 */
+		if (delta < CEC_TIM_DATA_BIT_TOTAL_MIN) {
+			if (!pin->rx_data_bit_too_short_cnt++) {
+				pin->rx_data_bit_too_short_ts = ktime_to_ns(pin->ts);
+				pin->rx_data_bit_too_short_delta = delta;
+			}
+			cec_pin_low(pin);
+			pin->state = CEC_ST_RX_LOW_DRIVE;
+			pin->rx_low_drive_cnt++;
+			break;
+		}
+		pin->ts = ts;
+		if (pin->rx_bit % 10 != 9) {
+			pin->state = CEC_ST_RX_DATA_SAMPLE;
+			break;
+		}
+
+		dest = cec_msg_destination(&pin->rx_msg);
+		bcast = dest == CEC_LOG_ADDR_BROADCAST;
+		/* for_us == broadcast or directed to us */
+		for_us = bcast || (pin->la_mask & (1 << dest));
+		/* ACK bit value */
+		ack = bcast ? 1 : !for_us;
+
+		if (for_us && rx_nack(pin)) {
+			/* Error injection: toggle the ACK bit */
+			ack = !ack;
+		}
+
+		if (ack) {
+			/* No need to write to the bus, just wait */
+			pin->state = CEC_ST_RX_ACK_HIGH_POST;
+			break;
+		}
+		cec_pin_low(pin);
+		pin->state = CEC_ST_RX_ACK_LOW;
+		break;
+
+	case CEC_ST_RX_ACK_LOW:
+		cec_pin_high(pin);
+		pin->state = CEC_ST_RX_ACK_LOW_POST;
+		break;
+
+	case CEC_ST_RX_ACK_LOW_POST:
+	case CEC_ST_RX_ACK_HIGH_POST:
+		v = cec_pin_read(pin);
+		if (v && pin->rx_eom) {
+			pin->work_rx_msg = pin->rx_msg;
+			pin->work_rx_msg.rx_ts = ktime_to_ns(ts);
+			wake_up_interruptible(&pin->kthread_waitq);
+			pin->ts = ts;
+			pin->state = CEC_ST_RX_ACK_FINISH;
+			break;
+		}
+		pin->rx_bit++;
+		pin->state = CEC_ST_RX_DATA_WAIT_FOR_LOW;
+		break;
+
+	case CEC_ST_RX_ACK_FINISH:
+		cec_pin_to_idle(pin);
+		break;
+
+	default:
+		break;
+	}
+}
+
+/*
+ * Main timer function
+ *
+ */
+static enum hrtimer_restart cec_pin_timer(struct hrtimer *timer)
+{
+	struct cec_pin *pin = container_of(timer, struct cec_pin, timer);
+	struct cec_adapter *adap = pin->adap;
+	ktime_t ts;
+	s32 delta;
+	u32 usecs;
+
+	ts = ktime_get();
+	if (ktime_to_ns(pin->timer_ts)) {
+		delta = ktime_us_delta(ts, pin->timer_ts);
+		pin->timer_cnt++;
+		if (delta > 100 && pin->state != CEC_ST_IDLE) {
+			/* Keep track of timer overruns */
+			pin->timer_sum_overrun += delta;
+			pin->timer_100ms_overruns++;
+			if (delta > 300)
+				pin->timer_300ms_overruns++;
+			if (delta > pin->timer_max_overrun)
+				pin->timer_max_overrun = delta;
+		}
+	}
+	if (adap->monitor_pin_cnt)
+		cec_pin_read(pin);
+
+	if (pin->wait_usecs) {
+		/*
+		 * If we are monitoring the pin, then we have to
+		 * sample at regular intervals.
+		 */
+		if (pin->wait_usecs > 150) {
+			pin->wait_usecs -= 100;
+			pin->timer_ts = ktime_add_us(ts, 100);
+			hrtimer_forward_now(timer, ns_to_ktime(100000));
+			return HRTIMER_RESTART;
+		}
+		if (pin->wait_usecs > 100) {
+			pin->wait_usecs /= 2;
+			pin->timer_ts = ktime_add_us(ts, pin->wait_usecs);
+			hrtimer_forward_now(timer,
+					ns_to_ktime(pin->wait_usecs * 1000));
+			return HRTIMER_RESTART;
+		}
+		pin->timer_ts = ktime_add_us(ts, pin->wait_usecs);
+		hrtimer_forward_now(timer,
+				    ns_to_ktime(pin->wait_usecs * 1000));
+		pin->wait_usecs = 0;
+		return HRTIMER_RESTART;
+	}
+
+	switch (pin->state) {
+	/* Transmit states */
+	case CEC_ST_TX_WAIT_FOR_HIGH:
+	case CEC_ST_TX_START_BIT_LOW:
+	case CEC_ST_TX_START_BIT_HIGH:
+	case CEC_ST_TX_START_BIT_HIGH_SHORT:
+	case CEC_ST_TX_START_BIT_HIGH_LONG:
+	case CEC_ST_TX_START_BIT_LOW_CUSTOM:
+	case CEC_ST_TX_START_BIT_HIGH_CUSTOM:
+	case CEC_ST_TX_DATA_BIT_0_LOW:
+	case CEC_ST_TX_DATA_BIT_0_HIGH:
+	case CEC_ST_TX_DATA_BIT_0_HIGH_SHORT:
+	case CEC_ST_TX_DATA_BIT_0_HIGH_LONG:
+	case CEC_ST_TX_DATA_BIT_1_LOW:
+	case CEC_ST_TX_DATA_BIT_1_HIGH:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_SHORT:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_LONG:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT:
+	case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG:
+	case CEC_ST_TX_DATA_BIT_LOW_CUSTOM:
+	case CEC_ST_TX_DATA_BIT_HIGH_CUSTOM:
+	case CEC_ST_TX_PULSE_LOW_CUSTOM:
+	case CEC_ST_TX_PULSE_HIGH_CUSTOM:
+		cec_pin_tx_states(pin, ts);
+		break;
+
+	/* Receive states */
+	case CEC_ST_RX_START_BIT_LOW:
+	case CEC_ST_RX_START_BIT_HIGH:
+	case CEC_ST_RX_DATA_SAMPLE:
+	case CEC_ST_RX_DATA_POST_SAMPLE:
+	case CEC_ST_RX_DATA_WAIT_FOR_LOW:
+	case CEC_ST_RX_ACK_LOW:
+	case CEC_ST_RX_ACK_LOW_POST:
+	case CEC_ST_RX_ACK_HIGH_POST:
+	case CEC_ST_RX_ACK_FINISH:
+		cec_pin_rx_states(pin, ts);
+		break;
+
+	case CEC_ST_IDLE:
+	case CEC_ST_TX_WAIT:
+		if (!cec_pin_high(pin)) {
+			/* Start bit, switch to receive state */
+			pin->ts = ts;
+			pin->state = CEC_ST_RX_START_BIT_LOW;
+			/*
+			 * If a transmit is pending, then that transmit should
+			 * use a signal free time of no more than
+			 * CEC_SIGNAL_FREE_TIME_NEW_INITIATOR since it will
+			 * have a new initiator due to the receive that is now
+			 * starting.
+			 */
+			if (pin->tx_msg.len && pin->tx_signal_free_time >
+			    CEC_SIGNAL_FREE_TIME_NEW_INITIATOR)
+				pin->tx_signal_free_time =
+					CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
+			break;
+		}
+		if (ktime_to_ns(pin->ts) == 0)
+			pin->ts = ts;
+		if (pin->tx_msg.len) {
+			/*
+			 * Check if the bus has been free for long enough
+			 * so we can kick off the pending transmit.
+			 */
+			delta = ktime_us_delta(ts, pin->ts);
+			if (delta / CEC_TIM_DATA_BIT_TOTAL >
+			    pin->tx_signal_free_time) {
+				pin->tx_nacked = false;
+				if (tx_custom_start(pin))
+					pin->state = CEC_ST_TX_START_BIT_LOW_CUSTOM;
+				else
+					pin->state = CEC_ST_TX_START_BIT_LOW;
+				/* Generate start bit */
+				cec_pin_low(pin);
+				break;
+			}
+			if (delta / CEC_TIM_DATA_BIT_TOTAL >
+			    pin->tx_signal_free_time - 1)
+				pin->state = CEC_ST_TX_WAIT;
+			break;
+		}
+		if (pin->tx_custom_pulse && pin->state == CEC_ST_IDLE) {
+			pin->tx_custom_pulse = false;
+			/* Generate custom pulse */
+			cec_pin_low(pin);
+			pin->state = CEC_ST_TX_PULSE_LOW_CUSTOM;
+			break;
+		}
+		if (pin->state != CEC_ST_IDLE || pin->ops->enable_irq == NULL ||
+		    pin->enable_irq_failed || adap->is_configuring ||
+		    adap->is_configured || adap->monitor_all_cnt)
+			break;
+		/* Switch to interrupt mode */
+		atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_ENABLE);
+		pin->state = CEC_ST_RX_IRQ;
+		wake_up_interruptible(&pin->kthread_waitq);
+		return HRTIMER_NORESTART;
+
+	case CEC_ST_TX_LOW_DRIVE:
+	case CEC_ST_RX_LOW_DRIVE:
+		cec_pin_high(pin);
+		cec_pin_to_idle(pin);
+		break;
+
+	default:
+		break;
+	}
+
+	switch (pin->state) {
+	case CEC_ST_TX_START_BIT_LOW_CUSTOM:
+	case CEC_ST_TX_DATA_BIT_LOW_CUSTOM:
+	case CEC_ST_TX_PULSE_LOW_CUSTOM:
+		usecs = pin->tx_custom_low_usecs;
+		break;
+	case CEC_ST_TX_START_BIT_HIGH_CUSTOM:
+	case CEC_ST_TX_DATA_BIT_HIGH_CUSTOM:
+	case CEC_ST_TX_PULSE_HIGH_CUSTOM:
+		usecs = pin->tx_custom_high_usecs;
+		break;
+	default:
+		usecs = states[pin->state].usecs;
+		break;
+	}
+
+	if (!adap->monitor_pin_cnt || usecs <= 150) {
+		pin->wait_usecs = 0;
+		pin->timer_ts = ktime_add_us(ts, usecs);
+		hrtimer_forward_now(timer,
+				ns_to_ktime(usecs * 1000));
+		return HRTIMER_RESTART;
+	}
+	pin->wait_usecs = usecs - 100;
+	pin->timer_ts = ktime_add_us(ts, 100);
+	hrtimer_forward_now(timer, ns_to_ktime(100000));
+	return HRTIMER_RESTART;
+}
+
+static int cec_pin_thread_func(void *_adap)
+{
+	struct cec_adapter *adap = _adap;
+	struct cec_pin *pin = adap->pin;
+
+	for (;;) {
+		wait_event_interruptible(pin->kthread_waitq,
+			kthread_should_stop() ||
+			pin->work_rx_msg.len ||
+			pin->work_tx_status ||
+			atomic_read(&pin->work_irq_change) ||
+			atomic_read(&pin->work_pin_num_events));
+
+		if (pin->work_rx_msg.len) {
+			struct cec_msg *msg = &pin->work_rx_msg;
+
+			if (msg->len > 1 && msg->len < CEC_MAX_MSG_SIZE &&
+			    rx_add_byte(pin)) {
+				/* Error injection: add byte to the message */
+				msg->msg[msg->len++] = 0x55;
+			}
+			if (msg->len > 2 && rx_remove_byte(pin)) {
+				/* Error injection: remove byte from message */
+				msg->len--;
+			}
+			if (msg->len > CEC_MAX_MSG_SIZE)
+				msg->len = CEC_MAX_MSG_SIZE;
+			cec_received_msg_ts(adap, msg,
+				ns_to_ktime(pin->work_rx_msg.rx_ts));
+			msg->len = 0;
+		}
+		if (pin->work_tx_status) {
+			unsigned int tx_status = pin->work_tx_status;
+
+			pin->work_tx_status = 0;
+			cec_transmit_attempt_done_ts(adap, tx_status,
+						     pin->work_tx_ts);
+		}
+
+		while (atomic_read(&pin->work_pin_num_events)) {
+			unsigned int idx = pin->work_pin_events_rd;
+			u8 v = pin->work_pin_events[idx];
+
+			cec_queue_pin_cec_event(adap,
+						v & CEC_PIN_EVENT_FL_IS_HIGH,
+						v & CEC_PIN_EVENT_FL_DROPPED,
+						pin->work_pin_ts[idx]);
+			pin->work_pin_events_rd = (idx + 1) % CEC_NUM_PIN_EVENTS;
+			atomic_dec(&pin->work_pin_num_events);
+		}
+
+		switch (atomic_xchg(&pin->work_irq_change,
+				    CEC_PIN_IRQ_UNCHANGED)) {
+		case CEC_PIN_IRQ_DISABLE:
+			pin->ops->disable_irq(adap);
+			cec_pin_high(pin);
+			cec_pin_to_idle(pin);
+			hrtimer_start(&pin->timer, ns_to_ktime(0),
+				      HRTIMER_MODE_REL);
+			break;
+		case CEC_PIN_IRQ_ENABLE:
+			pin->enable_irq_failed = !pin->ops->enable_irq(adap);
+			if (pin->enable_irq_failed) {
+				cec_pin_to_idle(pin);
+				hrtimer_start(&pin->timer, ns_to_ktime(0),
+					      HRTIMER_MODE_REL);
+			}
+			break;
+		default:
+			break;
+		}
+
+		if (kthread_should_stop())
+			break;
+	}
+	return 0;
+}
+
+static int cec_pin_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct cec_pin *pin = adap->pin;
+
+	pin->enabled = enable;
+	if (enable) {
+		atomic_set(&pin->work_pin_num_events, 0);
+		pin->work_pin_events_rd = pin->work_pin_events_wr = 0;
+		pin->work_pin_events_dropped = false;
+		cec_pin_read(pin);
+		cec_pin_to_idle(pin);
+		pin->tx_msg.len = 0;
+		pin->timer_ts = ns_to_ktime(0);
+		atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_UNCHANGED);
+		pin->kthread = kthread_run(cec_pin_thread_func, adap,
+					   "cec-pin");
+		if (IS_ERR(pin->kthread)) {
+			pr_err("cec-pin: kernel_thread() failed\n");
+			return PTR_ERR(pin->kthread);
+		}
+		hrtimer_start(&pin->timer, ns_to_ktime(0),
+			      HRTIMER_MODE_REL);
+	} else {
+		if (pin->ops->disable_irq)
+			pin->ops->disable_irq(adap);
+		hrtimer_cancel(&pin->timer);
+		kthread_stop(pin->kthread);
+		cec_pin_read(pin);
+		cec_pin_to_idle(pin);
+		pin->state = CEC_ST_OFF;
+	}
+	return 0;
+}
+
+static int cec_pin_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+	struct cec_pin *pin = adap->pin;
+
+	if (log_addr == CEC_LOG_ADDR_INVALID)
+		pin->la_mask = 0;
+	else
+		pin->la_mask |= (1 << log_addr);
+	return 0;
+}
+
+void cec_pin_start_timer(struct cec_pin *pin)
+{
+	if (pin->state != CEC_ST_RX_IRQ)
+		return;
+
+	atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_UNCHANGED);
+	pin->ops->disable_irq(pin->adap);
+	cec_pin_high(pin);
+	cec_pin_to_idle(pin);
+	hrtimer_start(&pin->timer, ns_to_ktime(0), HRTIMER_MODE_REL);
+}
+
+static int cec_pin_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				      u32 signal_free_time, struct cec_msg *msg)
+{
+	struct cec_pin *pin = adap->pin;
+
+	/*
+	 * If a receive is in progress, then this transmit should use
+	 * a signal free time of max CEC_SIGNAL_FREE_TIME_NEW_INITIATOR
+	 * since when it starts transmitting it will have a new initiator.
+	 */
+	if (pin->state != CEC_ST_IDLE &&
+	    signal_free_time > CEC_SIGNAL_FREE_TIME_NEW_INITIATOR)
+		signal_free_time = CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
+
+	pin->tx_signal_free_time = signal_free_time;
+	pin->tx_extra_bytes = 0;
+	pin->tx_msg = *msg;
+	if (msg->len > 1) {
+		/* Error injection: add byte to the message */
+		pin->tx_extra_bytes = tx_add_bytes(pin);
+	}
+	if (msg->len > 2 && tx_remove_byte(pin)) {
+		/* Error injection: remove byte from the message */
+		pin->tx_msg.len--;
+	}
+	pin->work_tx_status = 0;
+	pin->tx_bit = 0;
+	cec_pin_start_timer(pin);
+	return 0;
+}
+
+static void cec_pin_adap_status(struct cec_adapter *adap,
+				       struct seq_file *file)
+{
+	struct cec_pin *pin = adap->pin;
+
+	seq_printf(file, "state: %s\n", states[pin->state].name);
+	seq_printf(file, "tx_bit: %d\n", pin->tx_bit);
+	seq_printf(file, "rx_bit: %d\n", pin->rx_bit);
+	seq_printf(file, "cec pin: %d\n", pin->ops->read(adap));
+	seq_printf(file, "cec pin events dropped: %u\n",
+		   pin->work_pin_events_dropped_cnt);
+	seq_printf(file, "irq failed: %d\n", pin->enable_irq_failed);
+	if (pin->timer_100ms_overruns) {
+		seq_printf(file, "timer overruns > 100ms: %u of %u\n",
+			   pin->timer_100ms_overruns, pin->timer_cnt);
+		seq_printf(file, "timer overruns > 300ms: %u of %u\n",
+			   pin->timer_300ms_overruns, pin->timer_cnt);
+		seq_printf(file, "max timer overrun: %u usecs\n",
+			   pin->timer_max_overrun);
+		seq_printf(file, "avg timer overrun: %u usecs\n",
+			   pin->timer_sum_overrun / pin->timer_100ms_overruns);
+	}
+	if (pin->rx_start_bit_low_too_short_cnt)
+		seq_printf(file,
+			   "rx start bit low too short: %u (delta %u, ts %llu)\n",
+			   pin->rx_start_bit_low_too_short_cnt,
+			   pin->rx_start_bit_low_too_short_delta,
+			   pin->rx_start_bit_low_too_short_ts);
+	if (pin->rx_start_bit_too_short_cnt)
+		seq_printf(file,
+			   "rx start bit too short: %u (delta %u, ts %llu)\n",
+			   pin->rx_start_bit_too_short_cnt,
+			   pin->rx_start_bit_too_short_delta,
+			   pin->rx_start_bit_too_short_ts);
+	if (pin->rx_start_bit_too_long_cnt)
+		seq_printf(file, "rx start bit too long: %u\n",
+			   pin->rx_start_bit_too_long_cnt);
+	if (pin->rx_data_bit_too_short_cnt)
+		seq_printf(file,
+			   "rx data bit too short: %u (delta %u, ts %llu)\n",
+			   pin->rx_data_bit_too_short_cnt,
+			   pin->rx_data_bit_too_short_delta,
+			   pin->rx_data_bit_too_short_ts);
+	if (pin->rx_data_bit_too_long_cnt)
+		seq_printf(file, "rx data bit too long: %u\n",
+			   pin->rx_data_bit_too_long_cnt);
+	seq_printf(file, "rx initiated low drive: %u\n", pin->rx_low_drive_cnt);
+	seq_printf(file, "tx detected low drive: %u\n", pin->tx_low_drive_cnt);
+	pin->work_pin_events_dropped_cnt = 0;
+	pin->timer_cnt = 0;
+	pin->timer_100ms_overruns = 0;
+	pin->timer_300ms_overruns = 0;
+	pin->timer_max_overrun = 0;
+	pin->timer_sum_overrun = 0;
+	pin->rx_start_bit_low_too_short_cnt = 0;
+	pin->rx_start_bit_too_short_cnt = 0;
+	pin->rx_start_bit_too_long_cnt = 0;
+	pin->rx_data_bit_too_short_cnt = 0;
+	pin->rx_data_bit_too_long_cnt = 0;
+	pin->rx_low_drive_cnt = 0;
+	pin->tx_low_drive_cnt = 0;
+	if (pin->ops->status)
+		pin->ops->status(adap, file);
+}
+
+static int cec_pin_adap_monitor_all_enable(struct cec_adapter *adap,
+						  bool enable)
+{
+	struct cec_pin *pin = adap->pin;
+
+	pin->monitor_all = enable;
+	return 0;
+}
+
+static void cec_pin_adap_free(struct cec_adapter *adap)
+{
+	struct cec_pin *pin = adap->pin;
+
+	if (pin->ops->free)
+		pin->ops->free(adap);
+	adap->pin = NULL;
+	kfree(pin);
+}
+
+static int cec_pin_received(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	struct cec_pin *pin = adap->pin;
+
+	if (pin->ops->received)
+		return pin->ops->received(adap, msg);
+	return -ENOMSG;
+}
+
+void cec_pin_changed(struct cec_adapter *adap, bool value)
+{
+	struct cec_pin *pin = adap->pin;
+
+	cec_pin_update(pin, value, false);
+	if (!value && (adap->is_configuring || adap->is_configured ||
+		       adap->monitor_all_cnt))
+		atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_DISABLE);
+}
+EXPORT_SYMBOL_GPL(cec_pin_changed);
+
+static const struct cec_adap_ops cec_pin_adap_ops = {
+	.adap_enable = cec_pin_adap_enable,
+	.adap_monitor_all_enable = cec_pin_adap_monitor_all_enable,
+	.adap_log_addr = cec_pin_adap_log_addr,
+	.adap_transmit = cec_pin_adap_transmit,
+	.adap_status = cec_pin_adap_status,
+	.adap_free = cec_pin_adap_free,
+#ifdef CONFIG_CEC_PIN_ERROR_INJ
+	.error_inj_parse_line = cec_pin_error_inj_parse_line,
+	.error_inj_show = cec_pin_error_inj_show,
+#endif
+	.received = cec_pin_received,
+};
+
+struct cec_adapter *cec_pin_allocate_adapter(const struct cec_pin_ops *pin_ops,
+					void *priv, const char *name, u32 caps)
+{
+	struct cec_adapter *adap;
+	struct cec_pin *pin = kzalloc(sizeof(*pin), GFP_KERNEL);
+
+	if (pin == NULL)
+		return ERR_PTR(-ENOMEM);
+	pin->ops = pin_ops;
+	hrtimer_init(&pin->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	pin->timer.function = cec_pin_timer;
+	init_waitqueue_head(&pin->kthread_waitq);
+	pin->tx_custom_low_usecs = CEC_TIM_CUSTOM_DEFAULT;
+	pin->tx_custom_high_usecs = CEC_TIM_CUSTOM_DEFAULT;
+
+	adap = cec_allocate_adapter(&cec_pin_adap_ops, priv, name,
+			    caps | CEC_CAP_MONITOR_ALL | CEC_CAP_MONITOR_PIN,
+			    CEC_MAX_LOG_ADDRS);
+
+	if (IS_ERR(adap)) {
+		kfree(pin);
+		return adap;
+	}
+
+	adap->pin = pin;
+	pin->adap = adap;
+	cec_pin_update(pin, cec_pin_high(pin), true);
+	return adap;
+}
+EXPORT_SYMBOL_GPL(cec_pin_allocate_adapter);
diff --git a/drivers/media/cec/core/cec-priv.h b/drivers/media/cec/core/cec-priv.h
new file mode 100644
index 000000000000..9bbd05053d42
--- /dev/null
+++ b/drivers/media/cec/core/cec-priv.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * cec-priv.h - HDMI Consumer Electronics Control internal header
+ *
+ * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _CEC_PRIV_H
+#define _CEC_PRIV_H
+
+#include <linux/cec-funcs.h>
+#include <media/cec-notifier.h>
+
+#define dprintk(lvl, fmt, arg...)					\
+	do {								\
+		if (lvl <= cec_debug)					\
+			pr_info("cec-%s: " fmt, adap->name, ## arg);	\
+	} while (0)
+
+/* devnode to cec_adapter */
+#define to_cec_adapter(node) container_of(node, struct cec_adapter, devnode)
+
+static inline bool msg_is_raw(const struct cec_msg *msg)
+{
+	return msg->flags & CEC_MSG_FL_RAW;
+}
+
+/* cec-core.c */
+extern int cec_debug;
+int cec_get_device(struct cec_devnode *devnode);
+void cec_put_device(struct cec_devnode *devnode);
+
+/* cec-adap.c */
+int cec_monitor_all_cnt_inc(struct cec_adapter *adap);
+void cec_monitor_all_cnt_dec(struct cec_adapter *adap);
+int cec_monitor_pin_cnt_inc(struct cec_adapter *adap);
+void cec_monitor_pin_cnt_dec(struct cec_adapter *adap);
+int cec_adap_status(struct seq_file *file, void *priv);
+int cec_thread_func(void *_adap);
+void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block);
+int __cec_s_log_addrs(struct cec_adapter *adap,
+		      struct cec_log_addrs *log_addrs, bool block);
+int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg,
+			struct cec_fh *fh, bool block);
+void cec_queue_event_fh(struct cec_fh *fh,
+			const struct cec_event *new_ev, u64 ts);
+
+/* cec-api.c */
+extern const struct file_operations cec_devnode_fops;
+
+#endif
diff --git a/drivers/media/cec/platform/Kconfig b/drivers/media/cec/platform/Kconfig
new file mode 100644
index 000000000000..350533cd8261
--- /dev/null
+++ b/drivers/media/cec/platform/Kconfig
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Platform drivers
+
+config CEC_CROS_EC
+	tristate "ChromeOS EC CEC driver"
+	depends on CROS_EC
+	select CEC_CORE
+	select CEC_NOTIFIER
+	select CROS_EC_PROTO
+	help
+	  If you say yes here you will get support for the
+	  ChromeOS Embedded Controller's CEC.
+	  The CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_MESON_AO
+	tristate "Amlogic Meson AO CEC driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for Amlogic Meson SoCs AO CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+
+config CEC_MESON_G12A_AO
+	tristate "Amlogic Meson G12A AO CEC driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on COMMON_CLK && OF
+	select REGMAP
+	select REGMAP_MMIO
+	select CEC_CORE
+	select CEC_NOTIFIER
+	---help---
+	  This is a driver for Amlogic Meson G12A SoCs AO CEC interface.
+	  This driver if for the new AO-CEC module found in G12A SoCs,
+	  usually named AO_CEC_B in documentation.
+	  It uses the generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_GPIO
+	tristate "Generic GPIO-based CEC driver"
+	depends on PREEMPTION || COMPILE_TEST
+	select CEC_CORE
+	select CEC_PIN
+	select CEC_NOTIFIER
+	select GPIOLIB
+	help
+	  This is a generic GPIO-based CEC driver.
+	  The CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_SAMSUNG_S5P
+	tristate "Samsung S5P CEC driver"
+	depends on ARCH_EXYNOS || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for Samsung S5P HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_STI
+	tristate "STMicroelectronics STiH4xx HDMI CEC driver"
+	depends on ARCH_STI || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for STIH4xx HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_STM32
+	tristate "STMicroelectronics STM32 HDMI CEC driver"
+	depends on ARCH_STM32 || COMPILE_TEST
+	select REGMAP
+	select REGMAP_MMIO
+	select CEC_CORE
+	help
+	  This is a driver for STM32 interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_TEGRA
+	tristate "Tegra HDMI CEC driver"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for the Tegra HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  The CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_SECO
+	tristate "SECO Boards HDMI CEC driver"
+	depends on (X86 || IA64) || COMPILE_TEST
+	depends on PCI && DMI
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for SECO Boards integrated CEC interface.
+	  Selecting it will enable support for this device.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_SECO_RC
+	bool "SECO Boards IR RC5 support"
+	depends on CEC_SECO
+	depends on RC_CORE=y || RC_CORE = CEC_SECO
+	help
+	  If you say yes here you will get support for the
+	  SECO Boards Consumer-IR in seco-cec driver.
+	  The embedded controller supports RC5 protocol only, default mapping
+	  is set to rc-hauppauge.
diff --git a/drivers/media/cec/platform/Makefile b/drivers/media/cec/platform/Makefile
new file mode 100644
index 000000000000..3a947159b25a
--- /dev/null
+++ b/drivers/media/cec/platform/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the CEC platform device drivers.
+#
+
+# Please keep it in alphabetic order
+obj-$(CONFIG_CEC_CROS_EC)	+= cros-ec/
+obj-$(CONFIG_CEC_GPIO)		+= cec-gpio/
+obj-$(CONFIG_CEC_MESON_AO)	+= meson/
+obj-$(CONFIG_CEC_SAMSUNG_S5P)	+= s5p/
+obj-$(CONFIG_CEC_SECO)		+= seco/
+obj-$(CONFIG_CEC_STI)		+= sti/
+obj-$(CONFIG_CEC_TEGRA)		+= tegra/
+
diff --git a/drivers/media/cec/platform/cec-gpio/Makefile b/drivers/media/cec/platform/cec-gpio/Makefile
new file mode 100644
index 000000000000..a40c621dbd24
--- /dev/null
+++ b/drivers/media/cec/platform/cec-gpio/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CEC_GPIO) += cec-gpio.o
diff --git a/drivers/media/cec/platform/cec-gpio/cec-gpio.c b/drivers/media/cec/platform/cec-gpio/cec-gpio.c
new file mode 100644
index 000000000000..c8c4efc83f5f
--- /dev/null
+++ b/drivers/media/cec/platform/cec-gpio/cec-gpio.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <media/cec-notifier.h>
+#include <media/cec-pin.h>
+
+struct cec_gpio {
+	struct cec_adapter	*adap;
+	struct cec_notifier	*notifier;
+	struct device		*dev;
+
+	struct gpio_desc	*cec_gpio;
+	int			cec_irq;
+	bool			cec_is_low;
+
+	struct gpio_desc	*hpd_gpio;
+	int			hpd_irq;
+	bool			hpd_is_high;
+	ktime_t			hpd_ts;
+
+	struct gpio_desc	*v5_gpio;
+	int			v5_irq;
+	bool			v5_is_high;
+	ktime_t			v5_ts;
+};
+
+static int cec_gpio_read(struct cec_adapter *adap)
+{
+	struct cec_gpio *cec = cec_get_drvdata(adap);
+
+	if (cec->cec_is_low)
+		return 0;
+	return gpiod_get_value(cec->cec_gpio);
+}
+
+static void cec_gpio_high(struct cec_adapter *adap)
+{
+	struct cec_gpio *cec = cec_get_drvdata(adap);
+
+	if (!cec->cec_is_low)
+		return;
+	cec->cec_is_low = false;
+	gpiod_set_value(cec->cec_gpio, 1);
+}
+
+static void cec_gpio_low(struct cec_adapter *adap)
+{
+	struct cec_gpio *cec = cec_get_drvdata(adap);
+
+	if (cec->cec_is_low)
+		return;
+	cec->cec_is_low = true;
+	gpiod_set_value(cec->cec_gpio, 0);
+}
+
+static irqreturn_t cec_hpd_gpio_irq_handler_thread(int irq, void *priv)
+{
+	struct cec_gpio *cec = priv;
+
+	cec_queue_pin_hpd_event(cec->adap, cec->hpd_is_high, cec->hpd_ts);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t cec_5v_gpio_irq_handler(int irq, void *priv)
+{
+	struct cec_gpio *cec = priv;
+	int val = gpiod_get_value(cec->v5_gpio);
+	bool is_high = val > 0;
+
+	if (val < 0 || is_high == cec->v5_is_high)
+		return IRQ_HANDLED;
+	cec->v5_ts = ktime_get();
+	cec->v5_is_high = is_high;
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t cec_5v_gpio_irq_handler_thread(int irq, void *priv)
+{
+	struct cec_gpio *cec = priv;
+
+	cec_queue_pin_5v_event(cec->adap, cec->v5_is_high, cec->v5_ts);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t cec_hpd_gpio_irq_handler(int irq, void *priv)
+{
+	struct cec_gpio *cec = priv;
+	int val = gpiod_get_value(cec->hpd_gpio);
+	bool is_high = val > 0;
+
+	if (val < 0 || is_high == cec->hpd_is_high)
+		return IRQ_HANDLED;
+	cec->hpd_ts = ktime_get();
+	cec->hpd_is_high = is_high;
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t cec_gpio_irq_handler(int irq, void *priv)
+{
+	struct cec_gpio *cec = priv;
+	int val = gpiod_get_value(cec->cec_gpio);
+
+	if (val >= 0)
+		cec_pin_changed(cec->adap, val > 0);
+	return IRQ_HANDLED;
+}
+
+static bool cec_gpio_enable_irq(struct cec_adapter *adap)
+{
+	struct cec_gpio *cec = cec_get_drvdata(adap);
+
+	enable_irq(cec->cec_irq);
+	return true;
+}
+
+static void cec_gpio_disable_irq(struct cec_adapter *adap)
+{
+	struct cec_gpio *cec = cec_get_drvdata(adap);
+
+	disable_irq(cec->cec_irq);
+}
+
+static void cec_gpio_status(struct cec_adapter *adap, struct seq_file *file)
+{
+	struct cec_gpio *cec = cec_get_drvdata(adap);
+
+	seq_printf(file, "mode: %s\n", cec->cec_is_low ? "low-drive" : "read");
+	seq_printf(file, "using irq: %d\n", cec->cec_irq);
+	if (cec->hpd_gpio)
+		seq_printf(file, "hpd: %s\n",
+			   cec->hpd_is_high ? "high" : "low");
+	if (cec->v5_gpio)
+		seq_printf(file, "5V: %s\n",
+			   cec->v5_is_high ? "high" : "low");
+}
+
+static int cec_gpio_read_hpd(struct cec_adapter *adap)
+{
+	struct cec_gpio *cec = cec_get_drvdata(adap);
+
+	if (!cec->hpd_gpio)
+		return -ENOTTY;
+	return gpiod_get_value(cec->hpd_gpio);
+}
+
+static int cec_gpio_read_5v(struct cec_adapter *adap)
+{
+	struct cec_gpio *cec = cec_get_drvdata(adap);
+
+	if (!cec->v5_gpio)
+		return -ENOTTY;
+	return gpiod_get_value(cec->v5_gpio);
+}
+
+static void cec_gpio_free(struct cec_adapter *adap)
+{
+	cec_gpio_disable_irq(adap);
+}
+
+static const struct cec_pin_ops cec_gpio_pin_ops = {
+	.read = cec_gpio_read,
+	.low = cec_gpio_low,
+	.high = cec_gpio_high,
+	.enable_irq = cec_gpio_enable_irq,
+	.disable_irq = cec_gpio_disable_irq,
+	.status = cec_gpio_status,
+	.free = cec_gpio_free,
+	.read_hpd = cec_gpio_read_hpd,
+	.read_5v = cec_gpio_read_5v,
+};
+
+static int cec_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *hdmi_dev;
+	struct cec_gpio *cec;
+	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_MONITOR_ALL | CEC_CAP_MONITOR_PIN;
+	int ret;
+
+	hdmi_dev = cec_notifier_parse_hdmi_phandle(dev);
+	if (PTR_ERR(hdmi_dev) == -EPROBE_DEFER)
+		return PTR_ERR(hdmi_dev);
+	if (IS_ERR(hdmi_dev))
+		caps |= CEC_CAP_PHYS_ADDR;
+
+	cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL);
+	if (!cec)
+		return -ENOMEM;
+
+	cec->dev = dev;
+
+	cec->cec_gpio = devm_gpiod_get(dev, "cec", GPIOD_OUT_HIGH_OPEN_DRAIN);
+	if (IS_ERR(cec->cec_gpio))
+		return PTR_ERR(cec->cec_gpio);
+	cec->cec_irq = gpiod_to_irq(cec->cec_gpio);
+
+	cec->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
+	if (IS_ERR(cec->hpd_gpio))
+		return PTR_ERR(cec->hpd_gpio);
+
+	cec->v5_gpio = devm_gpiod_get_optional(dev, "v5", GPIOD_IN);
+	if (IS_ERR(cec->v5_gpio))
+		return PTR_ERR(cec->v5_gpio);
+
+	cec->adap = cec_pin_allocate_adapter(&cec_gpio_pin_ops,
+					     cec, pdev->name, caps);
+	if (IS_ERR(cec->adap))
+		return PTR_ERR(cec->adap);
+
+	ret = devm_request_irq(dev, cec->cec_irq, cec_gpio_irq_handler,
+			       IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			       cec->adap->name, cec);
+	if (ret)
+		goto del_adap;
+
+	cec_gpio_disable_irq(cec->adap);
+
+	if (cec->hpd_gpio) {
+		cec->hpd_irq = gpiod_to_irq(cec->hpd_gpio);
+		ret = devm_request_threaded_irq(dev, cec->hpd_irq,
+			cec_hpd_gpio_irq_handler,
+			cec_hpd_gpio_irq_handler_thread,
+			IRQF_ONESHOT |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"hpd-gpio", cec);
+		if (ret)
+			goto del_adap;
+	}
+
+	if (cec->v5_gpio) {
+		cec->v5_irq = gpiod_to_irq(cec->v5_gpio);
+		ret = devm_request_threaded_irq(dev, cec->v5_irq,
+			cec_5v_gpio_irq_handler,
+			cec_5v_gpio_irq_handler_thread,
+			IRQF_ONESHOT |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"v5-gpio", cec);
+		if (ret)
+			goto del_adap;
+	}
+
+	if (!IS_ERR(hdmi_dev)) {
+		cec->notifier = cec_notifier_cec_adap_register(hdmi_dev, NULL,
+							       cec->adap);
+		if (!cec->notifier) {
+			ret = -ENOMEM;
+			goto del_adap;
+		}
+	}
+
+	ret = cec_register_adapter(cec->adap, &pdev->dev);
+	if (ret)
+		goto unreg_notifier;
+
+	platform_set_drvdata(pdev, cec);
+	return 0;
+
+unreg_notifier:
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+del_adap:
+	cec_delete_adapter(cec->adap);
+	return ret;
+}
+
+static int cec_gpio_remove(struct platform_device *pdev)
+{
+	struct cec_gpio *cec = platform_get_drvdata(pdev);
+
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+	cec_unregister_adapter(cec->adap);
+	return 0;
+}
+
+static const struct of_device_id cec_gpio_match[] = {
+	{
+		.compatible	= "cec-gpio",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, cec_gpio_match);
+
+static struct platform_driver cec_gpio_pdrv = {
+	.probe	= cec_gpio_probe,
+	.remove = cec_gpio_remove,
+	.driver = {
+		.name		= "cec-gpio",
+		.of_match_table	= cec_gpio_match,
+	},
+};
+
+module_platform_driver(cec_gpio_pdrv);
+
+MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("CEC GPIO driver");
diff --git a/drivers/media/cec/platform/cros-ec/Makefile b/drivers/media/cec/platform/cros-ec/Makefile
new file mode 100644
index 000000000000..d7e3511078ef
--- /dev/null
+++ b/drivers/media/cec/platform/cros-ec/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CEC_CROS_EC) += cros-ec-cec.o
diff --git a/drivers/media/cec/platform/cros-ec/cros-ec-cec.c b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
new file mode 100644
index 000000000000..0e7e2772f08f
--- /dev/null
+++ b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CEC driver for ChromeOS Embedded Controller
+ *
+ * Copyright (c) 2018 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/cec.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+#define DRV_NAME	"cros-ec-cec"
+
+/**
+ * struct cros_ec_cec - Driver data for EC CEC
+ *
+ * @cros_ec: Pointer to EC device
+ * @notifier: Notifier info for responding to EC events
+ * @adap: CEC adapter
+ * @notify: CEC notifier pointer
+ * @rx_msg: storage for a received message
+ */
+struct cros_ec_cec {
+	struct cros_ec_device *cros_ec;
+	struct notifier_block notifier;
+	struct cec_adapter *adap;
+	struct cec_notifier *notify;
+	struct cec_msg rx_msg;
+};
+
+static void handle_cec_message(struct cros_ec_cec *cros_ec_cec)
+{
+	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
+	uint8_t *cec_message = cros_ec->event_data.data.cec_message;
+	unsigned int len = cros_ec->event_size;
+
+	cros_ec_cec->rx_msg.len = len;
+	memcpy(cros_ec_cec->rx_msg.msg, cec_message, len);
+
+	cec_received_msg(cros_ec_cec->adap, &cros_ec_cec->rx_msg);
+}
+
+static void handle_cec_event(struct cros_ec_cec *cros_ec_cec)
+{
+	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
+	uint32_t events = cros_ec->event_data.data.cec_events;
+
+	if (events & EC_MKBP_CEC_SEND_OK)
+		cec_transmit_attempt_done(cros_ec_cec->adap,
+					  CEC_TX_STATUS_OK);
+
+	/* FW takes care of all retries, tell core to avoid more retries */
+	if (events & EC_MKBP_CEC_SEND_FAILED)
+		cec_transmit_attempt_done(cros_ec_cec->adap,
+					  CEC_TX_STATUS_MAX_RETRIES |
+					  CEC_TX_STATUS_NACK);
+}
+
+static int cros_ec_cec_event(struct notifier_block *nb,
+			     unsigned long queued_during_suspend,
+			     void *_notify)
+{
+	struct cros_ec_cec *cros_ec_cec;
+	struct cros_ec_device *cros_ec;
+
+	cros_ec_cec = container_of(nb, struct cros_ec_cec, notifier);
+	cros_ec = cros_ec_cec->cros_ec;
+
+	if (cros_ec->event_data.event_type == EC_MKBP_EVENT_CEC_EVENT) {
+		handle_cec_event(cros_ec_cec);
+		return NOTIFY_OK;
+	}
+
+	if (cros_ec->event_data.event_type == EC_MKBP_EVENT_CEC_MESSAGE) {
+		handle_cec_message(cros_ec_cec);
+		return NOTIFY_OK;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int cros_ec_cec_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	struct cros_ec_cec *cros_ec_cec = adap->priv;
+	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
+	struct {
+		struct cros_ec_command msg;
+		struct ec_params_cec_set data;
+	} __packed msg = {};
+	int ret;
+
+	msg.msg.command = EC_CMD_CEC_SET;
+	msg.msg.outsize = sizeof(msg.data);
+	msg.data.cmd = CEC_CMD_LOGICAL_ADDRESS;
+	msg.data.val = logical_addr;
+
+	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
+	if (ret < 0) {
+		dev_err(cros_ec->dev,
+			"error setting CEC logical address on EC: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cros_ec_cec_transmit(struct cec_adapter *adap, u8 attempts,
+				u32 signal_free_time, struct cec_msg *cec_msg)
+{
+	struct cros_ec_cec *cros_ec_cec = adap->priv;
+	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
+	struct {
+		struct cros_ec_command msg;
+		struct ec_params_cec_write data;
+	} __packed msg = {};
+	int ret;
+
+	msg.msg.command = EC_CMD_CEC_WRITE_MSG;
+	msg.msg.outsize = cec_msg->len;
+	memcpy(msg.data.msg, cec_msg->msg, cec_msg->len);
+
+	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
+	if (ret < 0) {
+		dev_err(cros_ec->dev,
+			"error writing CEC msg on EC: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cros_ec_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct cros_ec_cec *cros_ec_cec = adap->priv;
+	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
+	struct {
+		struct cros_ec_command msg;
+		struct ec_params_cec_set data;
+	} __packed msg = {};
+	int ret;
+
+	msg.msg.command = EC_CMD_CEC_SET;
+	msg.msg.outsize = sizeof(msg.data);
+	msg.data.cmd = CEC_CMD_ENABLE;
+	msg.data.val = enable;
+
+	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
+	if (ret < 0) {
+		dev_err(cros_ec->dev,
+			"error %sabling CEC on EC: %d\n",
+			(enable ? "en" : "dis"), ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct cec_adap_ops cros_ec_cec_ops = {
+	.adap_enable = cros_ec_cec_adap_enable,
+	.adap_log_addr = cros_ec_cec_set_log_addr,
+	.adap_transmit = cros_ec_cec_transmit,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_ec_cec_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cros_ec_cec *cros_ec_cec = dev_get_drvdata(&pdev->dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(cros_ec_cec->cros_ec->irq);
+
+	return 0;
+}
+
+static int cros_ec_cec_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cros_ec_cec *cros_ec_cec = dev_get_drvdata(&pdev->dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(cros_ec_cec->cros_ec->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_cec_pm_ops,
+	cros_ec_cec_suspend, cros_ec_cec_resume);
+
+#if IS_ENABLED(CONFIG_PCI) && IS_ENABLED(CONFIG_DMI)
+
+/*
+ * The Firmware only handles a single CEC interface tied to a single HDMI
+ * connector we specify along with the DRM device name handling the HDMI output
+ */
+
+struct cec_dmi_match {
+	const char *sys_vendor;
+	const char *product_name;
+	const char *devname;
+	const char *conn;
+};
+
+static const struct cec_dmi_match cec_dmi_match_table[] = {
+	/* Google Fizz */
+	{ "Google", "Fizz", "0000:00:02.0", "Port B" },
+};
+
+static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
+						const char **conn)
+{
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(cec_dmi_match_table) ; ++i) {
+		const struct cec_dmi_match *m = &cec_dmi_match_table[i];
+
+		if (dmi_match(DMI_SYS_VENDOR, m->sys_vendor) &&
+		    dmi_match(DMI_PRODUCT_NAME, m->product_name)) {
+			struct device *d;
+
+			/* Find the device, bail out if not yet registered */
+			d = bus_find_device_by_name(&pci_bus_type, NULL,
+						    m->devname);
+			if (!d)
+				return ERR_PTR(-EPROBE_DEFER);
+			put_device(d);
+			*conn = m->conn;
+			return d;
+		}
+	}
+
+	/* Hardware support must be added in the cec_dmi_match_table */
+	dev_warn(dev, "CEC notifier not configured for this hardware\n");
+
+	return ERR_PTR(-ENODEV);
+}
+
+#else
+
+static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
+						const char **conn)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+#endif
+
+static int cros_ec_cec_probe(struct platform_device *pdev)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pdev->dev.parent);
+	struct cros_ec_device *cros_ec = ec_dev->ec_dev;
+	struct cros_ec_cec *cros_ec_cec;
+	struct device *hdmi_dev;
+	const char *conn = NULL;
+	int ret;
+
+	hdmi_dev = cros_ec_cec_find_hdmi_dev(&pdev->dev, &conn);
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	cros_ec_cec = devm_kzalloc(&pdev->dev, sizeof(*cros_ec_cec),
+				   GFP_KERNEL);
+	if (!cros_ec_cec)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, cros_ec_cec);
+	cros_ec_cec->cros_ec = cros_ec;
+
+	ret = device_init_wakeup(&pdev->dev, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize wakeup\n");
+		return ret;
+	}
+
+	cros_ec_cec->adap = cec_allocate_adapter(&cros_ec_cec_ops, cros_ec_cec,
+						 DRV_NAME,
+						 CEC_CAP_DEFAULTS |
+						 CEC_CAP_CONNECTOR_INFO, 1);
+	if (IS_ERR(cros_ec_cec->adap))
+		return PTR_ERR(cros_ec_cec->adap);
+
+	cros_ec_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, conn,
+							     cros_ec_cec->adap);
+	if (!cros_ec_cec->notify) {
+		ret = -ENOMEM;
+		goto out_probe_adapter;
+	}
+
+	/* Get CEC events from the EC. */
+	cros_ec_cec->notifier.notifier_call = cros_ec_cec_event;
+	ret = blocking_notifier_chain_register(&cros_ec->event_notifier,
+					       &cros_ec_cec->notifier);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register notifier\n");
+		goto out_probe_notify;
+	}
+
+	ret = cec_register_adapter(cros_ec_cec->adap, &pdev->dev);
+	if (ret < 0)
+		goto out_probe_notify;
+
+	return 0;
+
+out_probe_notify:
+	cec_notifier_cec_adap_unregister(cros_ec_cec->notify,
+					 cros_ec_cec->adap);
+out_probe_adapter:
+	cec_delete_adapter(cros_ec_cec->adap);
+	return ret;
+}
+
+static int cros_ec_cec_remove(struct platform_device *pdev)
+{
+	struct cros_ec_cec *cros_ec_cec = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(
+			&cros_ec_cec->cros_ec->event_notifier,
+			&cros_ec_cec->notifier);
+
+	if (ret) {
+		dev_err(dev, "failed to unregister notifier\n");
+		return ret;
+	}
+
+	cec_notifier_cec_adap_unregister(cros_ec_cec->notify,
+					 cros_ec_cec->adap);
+	cec_unregister_adapter(cros_ec_cec->adap);
+
+	return 0;
+}
+
+static struct platform_driver cros_ec_cec_driver = {
+	.probe = cros_ec_cec_probe,
+	.remove  = cros_ec_cec_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &cros_ec_cec_pm_ops,
+	},
+};
+
+module_platform_driver(cros_ec_cec_driver);
+
+MODULE_DESCRIPTION("CEC driver for ChromeOS ECs");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/media/cec/platform/meson/Makefile b/drivers/media/cec/platform/meson/Makefile
new file mode 100644
index 000000000000..34fc5d444d0e
--- /dev/null
+++ b/drivers/media/cec/platform/meson/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CEC_MESON_AO)	+= ao-cec.o
+obj-$(CONFIG_CEC_MESON_G12A_AO)	+= ao-cec-g12a.o
diff --git a/drivers/media/cec/platform/meson/ao-cec-g12a.c b/drivers/media/cec/platform/meson/ao-cec-g12a.c
new file mode 100644
index 000000000000..891533060d49
--- /dev/null
+++ b/drivers/media/cec/platform/meson/ao-cec-g12a.c
@@ -0,0 +1,796 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Amlogic Meson AO CEC G12A Controller
+ *
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+#include <linux/clk-provider.h>
+
+/* CEC Registers */
+
+#define CECB_CLK_CNTL_REG0		0x00
+
+#define CECB_CLK_CNTL_N1		GENMASK(11, 0)
+#define CECB_CLK_CNTL_N2		GENMASK(23, 12)
+#define CECB_CLK_CNTL_DUAL_EN		BIT(28)
+#define CECB_CLK_CNTL_OUTPUT_EN		BIT(30)
+#define CECB_CLK_CNTL_INPUT_EN		BIT(31)
+
+#define CECB_CLK_CNTL_REG1		0x04
+
+#define CECB_CLK_CNTL_M1		GENMASK(11, 0)
+#define CECB_CLK_CNTL_M2		GENMASK(23, 12)
+#define CECB_CLK_CNTL_BYPASS_EN		BIT(24)
+
+/*
+ * [14:12] Filter_del. For glitch-filtering CEC line, ignore signal
+ *       change pulse width < filter_del * T(filter_tick) * 3.
+ * [9:8] Filter_tick_sel: Select which periodical pulse for
+ *       glitch-filtering CEC line signal.
+ *  - 0=Use T(xtal)*3 = 125ns;
+ *  - 1=Use once-per-1us pulse;
+ *  - 2=Use once-per-10us pulse;
+ *  - 3=Use once-per-100us pulse.
+ * [3]   Sysclk_en. 0=Disable system clock; 1=Enable system clock.
+ * [2:1] cntl_clk
+ *  - 0 = Disable clk (Power-off mode)
+ *  - 1 = Enable gated clock (Normal mode)
+ *  - 2 = Enable free-run clk (Debug mode)
+ * [0] SW_RESET 1=Apply reset; 0=No reset.
+ */
+#define CECB_GEN_CNTL_REG		0x08
+
+#define CECB_GEN_CNTL_RESET		BIT(0)
+#define CECB_GEN_CNTL_CLK_DISABLE	0
+#define CECB_GEN_CNTL_CLK_ENABLE	1
+#define CECB_GEN_CNTL_CLK_ENABLE_DBG	2
+#define CECB_GEN_CNTL_CLK_CTRL_MASK	GENMASK(2, 1)
+#define CECB_GEN_CNTL_SYS_CLK_EN	BIT(3)
+#define CECB_GEN_CNTL_FILTER_TICK_125NS	0
+#define CECB_GEN_CNTL_FILTER_TICK_1US	1
+#define CECB_GEN_CNTL_FILTER_TICK_10US	2
+#define CECB_GEN_CNTL_FILTER_TICK_100US	3
+#define CECB_GEN_CNTL_FILTER_TICK_SEL	GENMASK(9, 8)
+#define CECB_GEN_CNTL_FILTER_DEL	GENMASK(14, 12)
+
+/*
+ * [7:0] cec_reg_addr
+ * [15:8] cec_reg_wrdata
+ * [16] cec_reg_wr
+ *  - 0 = Read
+ *  - 1 = Write
+ * [31:24] cec_reg_rddata
+ */
+#define CECB_RW_REG			0x0c
+
+#define CECB_RW_ADDR			GENMASK(7, 0)
+#define CECB_RW_WR_DATA			GENMASK(15, 8)
+#define CECB_RW_WRITE_EN		BIT(16)
+#define CECB_RW_BUS_BUSY		BIT(23)
+#define CECB_RW_RD_DATA			GENMASK(31, 24)
+
+/*
+ * [0] DONE Interrupt
+ * [1] End Of Message Interrupt
+ * [2] Not Acknowlegde Interrupt
+ * [3] Arbitration Loss Interrupt
+ * [4] Initiator Error Interrupt
+ * [5] Follower Error Interrupt
+ * [6] Wake-Up Interrupt
+ */
+#define CECB_INTR_MASKN_REG		0x10
+#define CECB_INTR_CLR_REG		0x14
+#define CECB_INTR_STAT_REG		0x18
+
+#define CECB_INTR_DONE			BIT(0)
+#define CECB_INTR_EOM			BIT(1)
+#define CECB_INTR_NACK			BIT(2)
+#define CECB_INTR_ARB_LOSS		BIT(3)
+#define CECB_INTR_INITIATOR_ERR		BIT(4)
+#define CECB_INTR_FOLLOWER_ERR		BIT(5)
+#define CECB_INTR_WAKE_UP		BIT(6)
+
+/* CEC Commands */
+
+#define CECB_CTRL		0x00
+
+#define CECB_CTRL_SEND		BIT(0)
+#define CECB_CTRL_TYPE		GENMASK(2, 1)
+#define CECB_CTRL_TYPE_RETRY	0
+#define CECB_CTRL_TYPE_NEW	1
+#define CECB_CTRL_TYPE_NEXT	2
+
+#define CECB_CTRL2		0x01
+
+#define CECB_CTRL2_RISE_DEL_MAX	GENMASK(4, 0)
+
+#define CECB_INTR_MASK		0x02
+#define CECB_LADD_LOW		0x05
+#define CECB_LADD_HIGH		0x06
+#define CECB_TX_CNT		0x07
+#define CECB_RX_CNT		0x08
+#define CECB_STAT0		0x09
+#define CECB_TX_DATA00		0x10
+#define CECB_TX_DATA01		0x11
+#define CECB_TX_DATA02		0x12
+#define CECB_TX_DATA03		0x13
+#define CECB_TX_DATA04		0x14
+#define CECB_TX_DATA05		0x15
+#define CECB_TX_DATA06		0x16
+#define CECB_TX_DATA07		0x17
+#define CECB_TX_DATA08		0x18
+#define CECB_TX_DATA09		0x19
+#define CECB_TX_DATA10		0x1A
+#define CECB_TX_DATA11		0x1B
+#define CECB_TX_DATA12		0x1C
+#define CECB_TX_DATA13		0x1D
+#define CECB_TX_DATA14		0x1E
+#define CECB_TX_DATA15		0x1F
+#define CECB_RX_DATA00		0x20
+#define CECB_RX_DATA01		0x21
+#define CECB_RX_DATA02		0x22
+#define CECB_RX_DATA03		0x23
+#define CECB_RX_DATA04		0x24
+#define CECB_RX_DATA05		0x25
+#define CECB_RX_DATA06		0x26
+#define CECB_RX_DATA07		0x27
+#define CECB_RX_DATA08		0x28
+#define CECB_RX_DATA09		0x29
+#define CECB_RX_DATA10		0x2A
+#define CECB_RX_DATA11		0x2B
+#define CECB_RX_DATA12		0x2C
+#define CECB_RX_DATA13		0x2D
+#define CECB_RX_DATA14		0x2E
+#define CECB_RX_DATA15		0x2F
+#define CECB_LOCK_BUF		0x30
+
+#define CECB_LOCK_BUF_EN	BIT(0)
+
+#define CECB_WAKEUPCTRL		0x31
+
+struct meson_ao_cec_g12a_data {
+	/* Setup the internal CECB_CTRL2 register */
+	bool				ctrl2_setup;
+};
+
+struct meson_ao_cec_g12a_device {
+	struct platform_device		*pdev;
+	struct regmap			*regmap;
+	struct regmap			*regmap_cec;
+	spinlock_t			cec_reg_lock;
+	struct cec_notifier		*notify;
+	struct cec_adapter		*adap;
+	struct cec_msg			rx_msg;
+	struct clk			*oscin;
+	struct clk			*core;
+	const struct meson_ao_cec_g12a_data *data;
+};
+
+static const struct regmap_config meson_ao_cec_g12a_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = CECB_INTR_STAT_REG,
+};
+
+/*
+ * The AO-CECB embeds a dual/divider to generate a more precise
+ * 32,768KHz clock for CEC core clock.
+ *                      ______   ______
+ *                     |      | |      |
+ *         ______      | Div1 |-| Cnt1 |       ______
+ *        |      |    /|______| |______|\     |      |
+ * Xtal-->| Gate |---|  ______   ______  X-X--| Gate |-->
+ *        |______| |  \|      | |      |/  |  |______|
+ *                 |   | Div2 |-| Cnt2 |   |
+ *                 |   |______| |______|   |
+ *                 |_______________________|
+ *
+ * The dividing can be switched to single or dual, with a counter
+ * for each divider to set when the switching is done.
+ * The entire dividing mechanism can be also bypassed.
+ */
+
+struct meson_ao_cec_g12a_dualdiv_clk {
+	struct clk_hw hw;
+	struct regmap *regmap;
+};
+
+#define hw_to_meson_ao_cec_g12a_dualdiv_clk(_hw)			\
+	container_of(_hw, struct meson_ao_cec_g12a_dualdiv_clk, hw)	\
+
+static unsigned long
+meson_ao_cec_g12a_dualdiv_clk_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
+		hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
+	unsigned long n1;
+	u32 reg0, reg1;
+
+	regmap_read(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0, &reg0);
+	regmap_read(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0, &reg1);
+
+	if (reg1 & CECB_CLK_CNTL_BYPASS_EN)
+		return parent_rate;
+
+	if (reg0 & CECB_CLK_CNTL_DUAL_EN) {
+		unsigned long n2, m1, m2, f1, f2, p1, p2;
+
+		n1 = FIELD_GET(CECB_CLK_CNTL_N1, reg0) + 1;
+		n2 = FIELD_GET(CECB_CLK_CNTL_N2, reg0) + 1;
+
+		m1 = FIELD_GET(CECB_CLK_CNTL_M1, reg1) + 1;
+		m2 = FIELD_GET(CECB_CLK_CNTL_M1, reg1) + 1;
+
+		f1 = DIV_ROUND_CLOSEST(parent_rate, n1);
+		f2 = DIV_ROUND_CLOSEST(parent_rate, n2);
+
+		p1 = DIV_ROUND_CLOSEST(100000000 * m1, f1 * (m1 + m2));
+		p2 = DIV_ROUND_CLOSEST(100000000 * m2, f2 * (m1 + m2));
+
+		return DIV_ROUND_UP(100000000, p1 + p2);
+	}
+
+	n1 = FIELD_GET(CECB_CLK_CNTL_N1, reg0) + 1;
+
+	return DIV_ROUND_CLOSEST(parent_rate, n1);
+}
+
+static int meson_ao_cec_g12a_dualdiv_clk_enable(struct clk_hw *hw)
+{
+	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
+		hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
+
+
+	/* Disable Input & Output */
+	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
+			   CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN,
+			   0);
+
+	/* Set N1 & N2 */
+	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
+			   CECB_CLK_CNTL_N1,
+			   FIELD_PREP(CECB_CLK_CNTL_N1, 733 - 1));
+
+	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
+			   CECB_CLK_CNTL_N2,
+			   FIELD_PREP(CECB_CLK_CNTL_N2, 732 - 1));
+
+	/* Set M1 & M2 */
+	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG1,
+			   CECB_CLK_CNTL_M1,
+			   FIELD_PREP(CECB_CLK_CNTL_M1, 8 - 1));
+
+	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG1,
+			   CECB_CLK_CNTL_M2,
+			   FIELD_PREP(CECB_CLK_CNTL_M2, 11 - 1));
+
+	/* Enable Dual divisor */
+	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
+			   CECB_CLK_CNTL_DUAL_EN, CECB_CLK_CNTL_DUAL_EN);
+
+	/* Disable divisor bypass */
+	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG1,
+			   CECB_CLK_CNTL_BYPASS_EN, 0);
+
+	/* Enable Input & Output */
+	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
+			   CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN,
+			   CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN);
+
+	return 0;
+}
+
+static void meson_ao_cec_g12a_dualdiv_clk_disable(struct clk_hw *hw)
+{
+	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
+		hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
+
+	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
+			   CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN,
+			   0);
+}
+
+static int meson_ao_cec_g12a_dualdiv_clk_is_enabled(struct clk_hw *hw)
+{
+	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
+		hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
+	int val;
+
+	regmap_read(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0, &val);
+
+	return !!(val & (CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN));
+}
+
+static const struct clk_ops meson_ao_cec_g12a_dualdiv_clk_ops = {
+	.recalc_rate	= meson_ao_cec_g12a_dualdiv_clk_recalc_rate,
+	.is_enabled	= meson_ao_cec_g12a_dualdiv_clk_is_enabled,
+	.enable		= meson_ao_cec_g12a_dualdiv_clk_enable,
+	.disable	= meson_ao_cec_g12a_dualdiv_clk_disable,
+};
+
+static int meson_ao_cec_g12a_setup_clk(struct meson_ao_cec_g12a_device *ao_cec)
+{
+	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk;
+	struct device *dev = &ao_cec->pdev->dev;
+	struct clk_init_data init;
+	const char *parent_name;
+	struct clk *clk;
+	char *name;
+
+	dualdiv_clk = devm_kzalloc(dev, sizeof(*dualdiv_clk), GFP_KERNEL);
+	if (!dualdiv_clk)
+		return -ENOMEM;
+
+	name = kasprintf(GFP_KERNEL, "%s#dualdiv_clk", dev_name(dev));
+	if (!name)
+		return -ENOMEM;
+
+	parent_name = __clk_get_name(ao_cec->oscin);
+
+	init.name = name;
+	init.ops = &meson_ao_cec_g12a_dualdiv_clk_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	dualdiv_clk->regmap = ao_cec->regmap;
+	dualdiv_clk->hw.init = &init;
+
+	clk = devm_clk_register(dev, &dualdiv_clk->hw);
+	kfree(name);
+	if (IS_ERR(clk)) {
+		dev_err(dev, "failed to register clock\n");
+		return PTR_ERR(clk);
+	}
+
+	ao_cec->core = clk;
+
+	return 0;
+}
+
+static int meson_ao_cec_g12a_read(void *context, unsigned int addr,
+				  unsigned int *data)
+{
+	struct meson_ao_cec_g12a_device *ao_cec = context;
+	u32 reg = FIELD_PREP(CECB_RW_ADDR, addr);
+	int ret = 0;
+
+	ret = regmap_write(ao_cec->regmap, CECB_RW_REG, reg);
+	if (ret)
+		return ret;
+
+	ret = regmap_read_poll_timeout(ao_cec->regmap, CECB_RW_REG, reg,
+				       !(reg & CECB_RW_BUS_BUSY),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(ao_cec->regmap, CECB_RW_REG, &reg);
+
+	*data = FIELD_GET(CECB_RW_RD_DATA, reg);
+
+	return ret;
+}
+
+static int meson_ao_cec_g12a_write(void *context, unsigned int addr,
+				   unsigned int data)
+{
+	struct meson_ao_cec_g12a_device *ao_cec = context;
+	u32 reg = FIELD_PREP(CECB_RW_ADDR, addr) |
+		  FIELD_PREP(CECB_RW_WR_DATA, data) |
+		  CECB_RW_WRITE_EN;
+
+	return regmap_write(ao_cec->regmap, CECB_RW_REG, reg);
+}
+
+static const struct regmap_config meson_ao_cec_g12a_cec_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_read = meson_ao_cec_g12a_read,
+	.reg_write = meson_ao_cec_g12a_write,
+	.max_register = 0xffff,
+};
+
+static inline void
+meson_ao_cec_g12a_irq_setup(struct meson_ao_cec_g12a_device *ao_cec,
+			    bool enable)
+{
+	u32 cfg = CECB_INTR_DONE | CECB_INTR_EOM | CECB_INTR_NACK |
+		  CECB_INTR_ARB_LOSS | CECB_INTR_INITIATOR_ERR |
+		  CECB_INTR_FOLLOWER_ERR;
+
+	regmap_write(ao_cec->regmap, CECB_INTR_MASKN_REG,
+		     enable ? cfg : 0);
+}
+
+static void meson_ao_cec_g12a_irq_rx(struct meson_ao_cec_g12a_device *ao_cec)
+{
+	int i, ret = 0;
+	u32 val;
+
+	ret = regmap_read(ao_cec->regmap_cec, CECB_RX_CNT, &val);
+
+	ao_cec->rx_msg.len = val;
+	if (ao_cec->rx_msg.len > CEC_MAX_MSG_SIZE)
+		ao_cec->rx_msg.len = CEC_MAX_MSG_SIZE;
+
+	for (i = 0; i < ao_cec->rx_msg.len; i++) {
+		ret |= regmap_read(ao_cec->regmap_cec,
+				   CECB_RX_DATA00 + i, &val);
+
+		ao_cec->rx_msg.msg[i] = val & 0xff;
+	}
+
+	ret |= regmap_write(ao_cec->regmap_cec, CECB_LOCK_BUF, 0);
+	if (ret)
+		return;
+
+	cec_received_msg(ao_cec->adap, &ao_cec->rx_msg);
+}
+
+static irqreturn_t meson_ao_cec_g12a_irq(int irq, void *data)
+{
+	struct meson_ao_cec_g12a_device *ao_cec = data;
+	u32 stat;
+
+	regmap_read(ao_cec->regmap, CECB_INTR_STAT_REG, &stat);
+	if (stat)
+		return IRQ_WAKE_THREAD;
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t meson_ao_cec_g12a_irq_thread(int irq, void *data)
+{
+	struct meson_ao_cec_g12a_device *ao_cec = data;
+	u32 stat;
+
+	regmap_read(ao_cec->regmap, CECB_INTR_STAT_REG, &stat);
+	regmap_write(ao_cec->regmap, CECB_INTR_CLR_REG, stat);
+
+	if (stat & CECB_INTR_DONE)
+		cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_OK);
+
+	if (stat & CECB_INTR_EOM)
+		meson_ao_cec_g12a_irq_rx(ao_cec);
+
+	if (stat & CECB_INTR_NACK)
+		cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_NACK);
+
+	if (stat & CECB_INTR_ARB_LOSS) {
+		regmap_write(ao_cec->regmap_cec, CECB_TX_CNT, 0);
+		regmap_update_bits(ao_cec->regmap_cec, CECB_CTRL,
+				   CECB_CTRL_SEND | CECB_CTRL_TYPE, 0);
+		cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_ARB_LOST);
+	}
+
+	/* Initiator reports an error on the CEC bus */
+	if (stat & CECB_INTR_INITIATOR_ERR)
+		cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_ERROR);
+
+	/* Follower reports a receive error, just reset RX buffer */
+	if (stat & CECB_INTR_FOLLOWER_ERR)
+		regmap_write(ao_cec->regmap_cec, CECB_LOCK_BUF, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int
+meson_ao_cec_g12a_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	struct meson_ao_cec_g12a_device *ao_cec = adap->priv;
+	int ret = 0;
+
+	if (logical_addr == CEC_LOG_ADDR_INVALID) {
+		/* Assume this will allways succeed */
+		regmap_write(ao_cec->regmap_cec, CECB_LADD_LOW, 0);
+		regmap_write(ao_cec->regmap_cec, CECB_LADD_HIGH, 0);
+
+		return 0;
+	} else if (logical_addr < 8) {
+		ret = regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_LOW,
+					 BIT(logical_addr),
+					 BIT(logical_addr));
+	} else {
+		ret = regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_HIGH,
+					 BIT(logical_addr - 8),
+					 BIT(logical_addr - 8));
+	}
+
+	/* Always set Broadcast/Unregistered 15 address */
+	ret |= regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_HIGH,
+				  BIT(CEC_LOG_ADDR_UNREGISTERED - 8),
+				  BIT(CEC_LOG_ADDR_UNREGISTERED - 8));
+
+	return ret ? -EIO : 0;
+}
+
+static int meson_ao_cec_g12a_transmit(struct cec_adapter *adap, u8 attempts,
+				 u32 signal_free_time, struct cec_msg *msg)
+{
+	struct meson_ao_cec_g12a_device *ao_cec = adap->priv;
+	unsigned int type;
+	int ret = 0;
+	u32 val;
+	int i;
+
+	/* Check if RX is in progress */
+	ret = regmap_read(ao_cec->regmap_cec, CECB_LOCK_BUF, &val);
+	if (ret)
+		return ret;
+	if (val & CECB_LOCK_BUF_EN)
+		return -EBUSY;
+
+	/* Check if TX Busy */
+	ret = regmap_read(ao_cec->regmap_cec, CECB_CTRL, &val);
+	if (ret)
+		return ret;
+	if (val & CECB_CTRL_SEND)
+		return -EBUSY;
+
+	switch (signal_free_time) {
+	case CEC_SIGNAL_FREE_TIME_RETRY:
+		type = CECB_CTRL_TYPE_RETRY;
+		break;
+	case CEC_SIGNAL_FREE_TIME_NEXT_XFER:
+		type = CECB_CTRL_TYPE_NEXT;
+		break;
+	case CEC_SIGNAL_FREE_TIME_NEW_INITIATOR:
+	default:
+		type = CECB_CTRL_TYPE_NEW;
+		break;
+	}
+
+	for (i = 0; i < msg->len; i++)
+		ret |= regmap_write(ao_cec->regmap_cec, CECB_TX_DATA00 + i,
+				    msg->msg[i]);
+
+	ret |= regmap_write(ao_cec->regmap_cec, CECB_TX_CNT, msg->len);
+	if (ret)
+		return -EIO;
+
+	ret = regmap_update_bits(ao_cec->regmap_cec, CECB_CTRL,
+				 CECB_CTRL_SEND |
+				 CECB_CTRL_TYPE,
+				 CECB_CTRL_SEND |
+				 FIELD_PREP(CECB_CTRL_TYPE, type));
+
+	return ret;
+}
+
+static int meson_ao_cec_g12a_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct meson_ao_cec_g12a_device *ao_cec = adap->priv;
+
+	meson_ao_cec_g12a_irq_setup(ao_cec, false);
+
+	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
+			   CECB_GEN_CNTL_RESET, CECB_GEN_CNTL_RESET);
+
+	if (!enable)
+		return 0;
+
+	/* Setup Filter */
+	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
+			   CECB_GEN_CNTL_FILTER_TICK_SEL |
+			   CECB_GEN_CNTL_FILTER_DEL,
+			   FIELD_PREP(CECB_GEN_CNTL_FILTER_TICK_SEL,
+				      CECB_GEN_CNTL_FILTER_TICK_1US) |
+			   FIELD_PREP(CECB_GEN_CNTL_FILTER_DEL, 7));
+
+	/* Enable System Clock */
+	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
+			   CECB_GEN_CNTL_SYS_CLK_EN,
+			   CECB_GEN_CNTL_SYS_CLK_EN);
+
+	/* Enable gated clock (Normal mode). */
+	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
+			   CECB_GEN_CNTL_CLK_CTRL_MASK,
+			    FIELD_PREP(CECB_GEN_CNTL_CLK_CTRL_MASK,
+				       CECB_GEN_CNTL_CLK_ENABLE));
+
+	/* Release Reset */
+	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
+			   CECB_GEN_CNTL_RESET, 0);
+
+	if (ao_cec->data->ctrl2_setup)
+		regmap_write(ao_cec->regmap_cec, CECB_CTRL2,
+			     FIELD_PREP(CECB_CTRL2_RISE_DEL_MAX, 2));
+
+	meson_ao_cec_g12a_irq_setup(ao_cec, true);
+
+	return 0;
+}
+
+static const struct cec_adap_ops meson_ao_cec_g12a_ops = {
+	.adap_enable = meson_ao_cec_g12a_adap_enable,
+	.adap_log_addr = meson_ao_cec_g12a_set_log_addr,
+	.adap_transmit = meson_ao_cec_g12a_transmit,
+};
+
+static int meson_ao_cec_g12a_probe(struct platform_device *pdev)
+{
+	struct meson_ao_cec_g12a_device *ao_cec;
+	struct device *hdmi_dev;
+	struct resource *res;
+	void __iomem *base;
+	int ret, irq;
+
+	hdmi_dev = cec_notifier_parse_hdmi_phandle(&pdev->dev);
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	ao_cec = devm_kzalloc(&pdev->dev, sizeof(*ao_cec), GFP_KERNEL);
+	if (!ao_cec)
+		return -ENOMEM;
+
+	ao_cec->data = of_device_get_match_data(&pdev->dev);
+	if (!ao_cec->data) {
+		dev_err(&pdev->dev, "failed to get match data\n");
+		return -ENODEV;
+	}
+
+	spin_lock_init(&ao_cec->cec_reg_lock);
+	ao_cec->pdev = pdev;
+
+	ao_cec->adap = cec_allocate_adapter(&meson_ao_cec_g12a_ops, ao_cec,
+					    "meson_g12a_ao_cec",
+					    CEC_CAP_DEFAULTS |
+					    CEC_CAP_CONNECTOR_INFO,
+					    CEC_MAX_LOG_ADDRS);
+	if (IS_ERR(ao_cec->adap))
+		return PTR_ERR(ao_cec->adap);
+
+	ao_cec->adap->owner = THIS_MODULE;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base)) {
+		ret = PTR_ERR(base);
+		goto out_probe_adapter;
+	}
+
+	ao_cec->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					       &meson_ao_cec_g12a_regmap_conf);
+	if (IS_ERR(ao_cec->regmap)) {
+		ret = PTR_ERR(ao_cec->regmap);
+		goto out_probe_adapter;
+	}
+
+	ao_cec->regmap_cec = devm_regmap_init(&pdev->dev, NULL, ao_cec,
+					   &meson_ao_cec_g12a_cec_regmap_conf);
+	if (IS_ERR(ao_cec->regmap_cec)) {
+		ret = PTR_ERR(ao_cec->regmap_cec);
+		goto out_probe_adapter;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_threaded_irq(&pdev->dev, irq,
+					meson_ao_cec_g12a_irq,
+					meson_ao_cec_g12a_irq_thread,
+					0, NULL, ao_cec);
+	if (ret) {
+		dev_err(&pdev->dev, "irq request failed\n");
+		goto out_probe_adapter;
+	}
+
+	ao_cec->oscin = devm_clk_get(&pdev->dev, "oscin");
+	if (IS_ERR(ao_cec->oscin)) {
+		dev_err(&pdev->dev, "oscin clock request failed\n");
+		ret = PTR_ERR(ao_cec->oscin);
+		goto out_probe_adapter;
+	}
+
+	ret = meson_ao_cec_g12a_setup_clk(ao_cec);
+	if (ret)
+		goto out_probe_adapter;
+
+	ret = clk_prepare_enable(ao_cec->core);
+	if (ret) {
+		dev_err(&pdev->dev, "core clock enable failed\n");
+		goto out_probe_adapter;
+	}
+
+	device_reset_optional(&pdev->dev);
+
+	platform_set_drvdata(pdev, ao_cec);
+
+	ao_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, NULL,
+							ao_cec->adap);
+	if (!ao_cec->notify) {
+		ret = -ENOMEM;
+		goto out_probe_core_clk;
+	}
+
+	ret = cec_register_adapter(ao_cec->adap, &pdev->dev);
+	if (ret < 0)
+		goto out_probe_notify;
+
+	/* Setup Hardware */
+	regmap_write(ao_cec->regmap, CECB_GEN_CNTL_REG, CECB_GEN_CNTL_RESET);
+
+	return 0;
+
+out_probe_notify:
+	cec_notifier_cec_adap_unregister(ao_cec->notify, ao_cec->adap);
+
+out_probe_core_clk:
+	clk_disable_unprepare(ao_cec->core);
+
+out_probe_adapter:
+	cec_delete_adapter(ao_cec->adap);
+
+	dev_err(&pdev->dev, "CEC controller registration failed\n");
+
+	return ret;
+}
+
+static int meson_ao_cec_g12a_remove(struct platform_device *pdev)
+{
+	struct meson_ao_cec_g12a_device *ao_cec = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(ao_cec->core);
+
+	cec_notifier_cec_adap_unregister(ao_cec->notify, ao_cec->adap);
+
+	cec_unregister_adapter(ao_cec->adap);
+
+	return 0;
+}
+
+static const struct meson_ao_cec_g12a_data ao_cec_g12a_data = {
+	.ctrl2_setup = false,
+};
+
+static const struct meson_ao_cec_g12a_data ao_cec_sm1_data = {
+	.ctrl2_setup = true,
+};
+
+static const struct of_device_id meson_ao_cec_g12a_of_match[] = {
+	{
+		.compatible = "amlogic,meson-g12a-ao-cec",
+		.data = &ao_cec_g12a_data,
+	},
+	{
+		.compatible = "amlogic,meson-sm1-ao-cec",
+		.data = &ao_cec_sm1_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, meson_ao_cec_g12a_of_match);
+
+static struct platform_driver meson_ao_cec_g12a_driver = {
+	.probe   = meson_ao_cec_g12a_probe,
+	.remove  = meson_ao_cec_g12a_remove,
+	.driver  = {
+		.name = "meson-ao-cec-g12a",
+		.of_match_table = of_match_ptr(meson_ao_cec_g12a_of_match),
+	},
+};
+
+module_platform_driver(meson_ao_cec_g12a_driver);
+
+MODULE_DESCRIPTION("Meson AO CEC G12A Controller driver");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/cec/platform/meson/ao-cec.c b/drivers/media/cec/platform/meson/ao-cec.c
new file mode 100644
index 000000000000..09aff82c3773
--- /dev/null
+++ b/drivers/media/cec/platform/meson/ao-cec.c
@@ -0,0 +1,732 @@
+/*
+ * Driver for Amlogic Meson AO CEC Controller
+ *
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+/* CEC Registers */
+
+/*
+ * [2:1] cntl_clk
+ *  - 0 = Disable clk (Power-off mode)
+ *  - 1 = Enable gated clock (Normal mode)
+ *  - 2 = Enable free-run clk (Debug mode)
+ */
+#define CEC_GEN_CNTL_REG		0x00
+
+#define CEC_GEN_CNTL_RESET		BIT(0)
+#define CEC_GEN_CNTL_CLK_DISABLE	0
+#define CEC_GEN_CNTL_CLK_ENABLE		1
+#define CEC_GEN_CNTL_CLK_ENABLE_DBG	2
+#define CEC_GEN_CNTL_CLK_CTRL_MASK	GENMASK(2, 1)
+
+/*
+ * [7:0] cec_reg_addr
+ * [15:8] cec_reg_wrdata
+ * [16] cec_reg_wr
+ *  - 0 = Read
+ *  - 1 = Write
+ * [23] bus free
+ * [31:24] cec_reg_rddata
+ */
+#define CEC_RW_REG			0x04
+
+#define CEC_RW_ADDR			GENMASK(7, 0)
+#define CEC_RW_WR_DATA			GENMASK(15, 8)
+#define CEC_RW_WRITE_EN			BIT(16)
+#define CEC_RW_BUS_BUSY			BIT(23)
+#define CEC_RW_RD_DATA			GENMASK(31, 24)
+
+/*
+ * [1] tx intr
+ * [2] rx intr
+ */
+#define CEC_INTR_MASKN_REG		0x08
+#define CEC_INTR_CLR_REG		0x0c
+#define CEC_INTR_STAT_REG		0x10
+
+#define CEC_INTR_TX			BIT(1)
+#define CEC_INTR_RX			BIT(2)
+
+/* CEC Commands */
+
+#define CEC_TX_MSG_0_HEADER		0x00
+#define CEC_TX_MSG_1_OPCODE		0x01
+#define CEC_TX_MSG_2_OP1		0x02
+#define CEC_TX_MSG_3_OP2		0x03
+#define CEC_TX_MSG_4_OP3		0x04
+#define CEC_TX_MSG_5_OP4		0x05
+#define CEC_TX_MSG_6_OP5		0x06
+#define CEC_TX_MSG_7_OP6		0x07
+#define CEC_TX_MSG_8_OP7		0x08
+#define CEC_TX_MSG_9_OP8		0x09
+#define CEC_TX_MSG_A_OP9		0x0A
+#define CEC_TX_MSG_B_OP10		0x0B
+#define CEC_TX_MSG_C_OP11		0x0C
+#define CEC_TX_MSG_D_OP12		0x0D
+#define CEC_TX_MSG_E_OP13		0x0E
+#define CEC_TX_MSG_F_OP14		0x0F
+#define CEC_TX_MSG_LENGTH		0x10
+#define CEC_TX_MSG_CMD			0x11
+#define CEC_TX_WRITE_BUF		0x12
+#define CEC_TX_CLEAR_BUF		0x13
+#define CEC_RX_MSG_CMD			0x14
+#define CEC_RX_CLEAR_BUF		0x15
+#define CEC_LOGICAL_ADDR0		0x16
+#define CEC_LOGICAL_ADDR1		0x17
+#define CEC_LOGICAL_ADDR2		0x18
+#define CEC_LOGICAL_ADDR3		0x19
+#define CEC_LOGICAL_ADDR4		0x1A
+#define CEC_CLOCK_DIV_H			0x1B
+#define CEC_CLOCK_DIV_L			0x1C
+#define CEC_QUIESCENT_25MS_BIT7_0	0x20
+#define CEC_QUIESCENT_25MS_BIT11_8	0x21
+#define CEC_STARTBITMINL2H_3MS5_BIT7_0	0x22
+#define CEC_STARTBITMINL2H_3MS5_BIT8	0x23
+#define CEC_STARTBITMAXL2H_3MS9_BIT7_0	0x24
+#define CEC_STARTBITMAXL2H_3MS9_BIT8	0x25
+#define CEC_STARTBITMINH_0MS6_BIT7_0	0x26
+#define CEC_STARTBITMINH_0MS6_BIT8	0x27
+#define CEC_STARTBITMAXH_1MS0_BIT7_0	0x28
+#define CEC_STARTBITMAXH_1MS0_BIT8	0x29
+#define CEC_STARTBITMINTOT_4MS3_BIT7_0	0x2A
+#define CEC_STARTBITMINTOT_4MS3_BIT9_8	0x2B
+#define CEC_STARTBITMAXTOT_4MS7_BIT7_0	0x2C
+#define CEC_STARTBITMAXTOT_4MS7_BIT9_8	0x2D
+#define CEC_LOGIC1MINL2H_0MS4_BIT7_0	0x2E
+#define CEC_LOGIC1MINL2H_0MS4_BIT8	0x2F
+#define CEC_LOGIC1MAXL2H_0MS8_BIT7_0	0x30
+#define CEC_LOGIC1MAXL2H_0MS8_BIT8	0x31
+#define CEC_LOGIC0MINL2H_1MS3_BIT7_0	0x32
+#define CEC_LOGIC0MINL2H_1MS3_BIT8	0x33
+#define CEC_LOGIC0MAXL2H_1MS7_BIT7_0	0x34
+#define CEC_LOGIC0MAXL2H_1MS7_BIT8	0x35
+#define CEC_LOGICMINTOTAL_2MS05_BIT7_0	0x36
+#define CEC_LOGICMINTOTAL_2MS05_BIT9_8	0x37
+#define CEC_LOGICMAXHIGH_2MS8_BIT7_0	0x38
+#define CEC_LOGICMAXHIGH_2MS8_BIT8	0x39
+#define CEC_LOGICERRLOW_3MS4_BIT7_0	0x3A
+#define CEC_LOGICERRLOW_3MS4_BIT8	0x3B
+#define CEC_NOMSMPPOINT_1MS05		0x3C
+#define CEC_DELCNTR_LOGICERR		0x3E
+#define CEC_TXTIME_17MS_BIT7_0		0x40
+#define CEC_TXTIME_17MS_BIT10_8		0x41
+#define CEC_TXTIME_2BIT_BIT7_0		0x42
+#define CEC_TXTIME_2BIT_BIT10_8		0x43
+#define CEC_TXTIME_4BIT_BIT7_0		0x44
+#define CEC_TXTIME_4BIT_BIT10_8		0x45
+#define CEC_STARTBITNOML2H_3MS7_BIT7_0	0x46
+#define CEC_STARTBITNOML2H_3MS7_BIT8	0x47
+#define CEC_STARTBITNOMH_0MS8_BIT7_0	0x48
+#define CEC_STARTBITNOMH_0MS8_BIT8	0x49
+#define CEC_LOGIC1NOML2H_0MS6_BIT7_0	0x4A
+#define CEC_LOGIC1NOML2H_0MS6_BIT8	0x4B
+#define CEC_LOGIC0NOML2H_1MS5_BIT7_0	0x4C
+#define CEC_LOGIC0NOML2H_1MS5_BIT8	0x4D
+#define CEC_LOGIC1NOMH_1MS8_BIT7_0	0x4E
+#define CEC_LOGIC1NOMH_1MS8_BIT8	0x4F
+#define CEC_LOGIC0NOMH_0MS9_BIT7_0	0x50
+#define CEC_LOGIC0NOMH_0MS9_BIT8	0x51
+#define CEC_LOGICERRLOW_3MS6_BIT7_0	0x52
+#define CEC_LOGICERRLOW_3MS6_BIT8	0x53
+#define CEC_CHKCONTENTION_0MS1		0x54
+#define CEC_PREPARENXTBIT_0MS05_BIT7_0	0x56
+#define CEC_PREPARENXTBIT_0MS05_BIT8	0x57
+#define CEC_NOMSMPACKPOINT_0MS45	0x58
+#define CEC_ACK0NOML2H_1MS5_BIT7_0	0x5A
+#define CEC_ACK0NOML2H_1MS5_BIT8	0x5B
+#define CEC_BUGFIX_DISABLE_0		0x60
+#define CEC_BUGFIX_DISABLE_1		0x61
+#define CEC_RX_MSG_0_HEADER		0x80
+#define CEC_RX_MSG_1_OPCODE		0x81
+#define CEC_RX_MSG_2_OP1		0x82
+#define CEC_RX_MSG_3_OP2		0x83
+#define CEC_RX_MSG_4_OP3		0x84
+#define CEC_RX_MSG_5_OP4		0x85
+#define CEC_RX_MSG_6_OP5		0x86
+#define CEC_RX_MSG_7_OP6		0x87
+#define CEC_RX_MSG_8_OP7		0x88
+#define CEC_RX_MSG_9_OP8		0x89
+#define CEC_RX_MSG_A_OP9		0x8A
+#define CEC_RX_MSG_B_OP10		0x8B
+#define CEC_RX_MSG_C_OP11		0x8C
+#define CEC_RX_MSG_D_OP12		0x8D
+#define CEC_RX_MSG_E_OP13		0x8E
+#define CEC_RX_MSG_F_OP14		0x8F
+#define CEC_RX_MSG_LENGTH		0x90
+#define CEC_RX_MSG_STATUS		0x91
+#define CEC_RX_NUM_MSG			0x92
+#define CEC_TX_MSG_STATUS		0x93
+#define CEC_TX_NUM_MSG			0x94
+
+
+/* CEC_TX_MSG_CMD definition */
+#define TX_NO_OP	0  /* No transaction */
+#define TX_REQ_CURRENT	1  /* Transmit earliest message in buffer */
+#define TX_ABORT	2  /* Abort transmitting earliest message */
+#define TX_REQ_NEXT	3  /* Overwrite earliest msg, transmit next */
+
+/* tx_msg_status definition */
+#define TX_IDLE		0  /* No transaction */
+#define TX_BUSY		1  /* Transmitter is busy */
+#define TX_DONE		2  /* Message successfully transmitted */
+#define TX_ERROR	3  /* Message transmitted with error */
+
+/* rx_msg_cmd */
+#define RX_NO_OP	0  /* No transaction */
+#define RX_ACK_CURRENT	1  /* Read earliest message in buffer */
+#define RX_DISABLE	2  /* Disable receiving latest message */
+#define RX_ACK_NEXT	3  /* Clear earliest msg, read next */
+
+/* rx_msg_status */
+#define RX_IDLE		0  /* No transaction */
+#define RX_BUSY		1  /* Receiver is busy */
+#define RX_DONE		2  /* Message has been received successfully */
+#define RX_ERROR	3  /* Message has been received with error */
+
+/* RX_CLEAR_BUF options */
+#define CLEAR_START	1
+#define CLEAR_STOP	0
+
+/* CEC_LOGICAL_ADDRx options */
+#define LOGICAL_ADDR_MASK	0xf
+#define LOGICAL_ADDR_VALID	BIT(4)
+#define LOGICAL_ADDR_DISABLE	0
+
+#define CEC_CLK_RATE		32768
+
+struct meson_ao_cec_device {
+	struct platform_device		*pdev;
+	void __iomem			*base;
+	struct clk			*core;
+	spinlock_t			cec_reg_lock;
+	struct cec_notifier		*notify;
+	struct cec_adapter		*adap;
+	struct cec_msg			rx_msg;
+};
+
+#define writel_bits_relaxed(mask, val, addr) \
+	writel_relaxed((readl_relaxed(addr) & ~(mask)) | (val), addr)
+
+static inline int meson_ao_cec_wait_busy(struct meson_ao_cec_device *ao_cec)
+{
+	ktime_t timeout = ktime_add_us(ktime_get(), 5000);
+
+	while (readl_relaxed(ao_cec->base + CEC_RW_REG) & CEC_RW_BUS_BUSY) {
+		if (ktime_compare(ktime_get(), timeout) > 0)
+			return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void meson_ao_cec_read(struct meson_ao_cec_device *ao_cec,
+			     unsigned long address, u8 *data,
+			     int *res)
+{
+	unsigned long flags;
+	u32 reg = FIELD_PREP(CEC_RW_ADDR, address);
+	int ret = 0;
+
+	if (res && *res)
+		return;
+
+	spin_lock_irqsave(&ao_cec->cec_reg_lock, flags);
+
+	ret = meson_ao_cec_wait_busy(ao_cec);
+	if (ret)
+		goto read_out;
+
+	writel_relaxed(reg, ao_cec->base + CEC_RW_REG);
+
+	ret = meson_ao_cec_wait_busy(ao_cec);
+	if (ret)
+		goto read_out;
+
+	*data = FIELD_GET(CEC_RW_RD_DATA,
+			  readl_relaxed(ao_cec->base + CEC_RW_REG));
+
+read_out:
+	spin_unlock_irqrestore(&ao_cec->cec_reg_lock, flags);
+
+	if (res)
+		*res = ret;
+}
+
+static void meson_ao_cec_write(struct meson_ao_cec_device *ao_cec,
+			       unsigned long address, u8 data,
+			       int *res)
+{
+	unsigned long flags;
+	u32 reg = FIELD_PREP(CEC_RW_ADDR, address) |
+		  FIELD_PREP(CEC_RW_WR_DATA, data) |
+		  CEC_RW_WRITE_EN;
+	int ret = 0;
+
+	if (res && *res)
+		return;
+
+	spin_lock_irqsave(&ao_cec->cec_reg_lock, flags);
+
+	ret = meson_ao_cec_wait_busy(ao_cec);
+	if (ret)
+		goto write_out;
+
+	writel_relaxed(reg, ao_cec->base + CEC_RW_REG);
+
+write_out:
+	spin_unlock_irqrestore(&ao_cec->cec_reg_lock, flags);
+
+	if (res)
+		*res = ret;
+}
+
+static inline void meson_ao_cec_irq_setup(struct meson_ao_cec_device *ao_cec,
+				      bool enable)
+{
+	u32 cfg = CEC_INTR_TX | CEC_INTR_RX;
+
+	writel_bits_relaxed(cfg, enable ? cfg : 0,
+			    ao_cec->base + CEC_INTR_MASKN_REG);
+}
+
+static inline int meson_ao_cec_clear(struct meson_ao_cec_device *ao_cec)
+{
+	int ret = 0;
+
+	meson_ao_cec_write(ao_cec, CEC_RX_MSG_CMD, RX_DISABLE, &ret);
+	meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_ABORT, &ret);
+	meson_ao_cec_write(ao_cec, CEC_RX_CLEAR_BUF, 1, &ret);
+	meson_ao_cec_write(ao_cec, CEC_TX_CLEAR_BUF, 1, &ret);
+	if (ret)
+		return ret;
+
+	udelay(100);
+
+	meson_ao_cec_write(ao_cec, CEC_RX_CLEAR_BUF, 0, &ret);
+	meson_ao_cec_write(ao_cec, CEC_TX_CLEAR_BUF, 0, &ret);
+	if (ret)
+		return ret;
+
+	udelay(100);
+
+	meson_ao_cec_write(ao_cec, CEC_RX_MSG_CMD, RX_NO_OP, &ret);
+	meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_NO_OP, &ret);
+
+	return ret;
+}
+
+static int meson_ao_cec_arbit_bit_time_set(struct meson_ao_cec_device *ao_cec,
+					   unsigned int bit_set,
+					   unsigned int time_set)
+{
+	int ret = 0;
+
+	switch (bit_set) {
+	case CEC_SIGNAL_FREE_TIME_RETRY:
+		meson_ao_cec_write(ao_cec, CEC_TXTIME_4BIT_BIT7_0,
+				   time_set & 0xff, &ret);
+		meson_ao_cec_write(ao_cec, CEC_TXTIME_4BIT_BIT10_8,
+				   (time_set >> 8) & 0x7, &ret);
+		break;
+
+	case CEC_SIGNAL_FREE_TIME_NEW_INITIATOR:
+		meson_ao_cec_write(ao_cec, CEC_TXTIME_2BIT_BIT7_0,
+				   time_set & 0xff, &ret);
+		meson_ao_cec_write(ao_cec, CEC_TXTIME_2BIT_BIT10_8,
+				   (time_set >> 8) & 0x7, &ret);
+		break;
+
+	case CEC_SIGNAL_FREE_TIME_NEXT_XFER:
+		meson_ao_cec_write(ao_cec, CEC_TXTIME_17MS_BIT7_0,
+				   time_set & 0xff, &ret);
+		meson_ao_cec_write(ao_cec, CEC_TXTIME_17MS_BIT10_8,
+				   (time_set >> 8) & 0x7, &ret);
+		break;
+	}
+
+	return ret;
+}
+
+static irqreturn_t meson_ao_cec_irq(int irq, void *data)
+{
+	struct meson_ao_cec_device *ao_cec = data;
+	u32 stat = readl_relaxed(ao_cec->base + CEC_INTR_STAT_REG);
+
+	if (stat)
+		return IRQ_WAKE_THREAD;
+
+	return IRQ_NONE;
+}
+
+static void meson_ao_cec_irq_tx(struct meson_ao_cec_device *ao_cec)
+{
+	unsigned long tx_status = 0;
+	u8 stat;
+	int ret = 0;
+
+	meson_ao_cec_read(ao_cec, CEC_TX_MSG_STATUS, &stat, &ret);
+	if (ret)
+		goto tx_reg_err;
+
+	switch (stat) {
+	case TX_DONE:
+		tx_status = CEC_TX_STATUS_OK;
+		break;
+
+	case TX_BUSY:
+		tx_status = CEC_TX_STATUS_ARB_LOST;
+		break;
+
+	case TX_IDLE:
+		tx_status = CEC_TX_STATUS_LOW_DRIVE;
+		break;
+
+	case TX_ERROR:
+	default:
+		tx_status = CEC_TX_STATUS_NACK;
+		break;
+	}
+
+	/* Clear Interruption */
+	writel_relaxed(CEC_INTR_TX, ao_cec->base + CEC_INTR_CLR_REG);
+
+	/* Stop TX */
+	meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_NO_OP, &ret);
+	if (ret)
+		goto tx_reg_err;
+
+	cec_transmit_attempt_done(ao_cec->adap, tx_status);
+	return;
+
+tx_reg_err:
+	cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_ERROR);
+}
+
+static void meson_ao_cec_irq_rx(struct meson_ao_cec_device *ao_cec)
+{
+	int i, ret = 0;
+	u8 reg;
+
+	meson_ao_cec_read(ao_cec, CEC_RX_MSG_STATUS, &reg, &ret);
+	if (reg != RX_DONE)
+		goto rx_out;
+
+	meson_ao_cec_read(ao_cec, CEC_RX_NUM_MSG, &reg, &ret);
+	if (reg != 1)
+		goto rx_out;
+
+	meson_ao_cec_read(ao_cec, CEC_RX_MSG_LENGTH, &reg, &ret);
+
+	ao_cec->rx_msg.len = reg + 1;
+	if (ao_cec->rx_msg.len > CEC_MAX_MSG_SIZE)
+		ao_cec->rx_msg.len = CEC_MAX_MSG_SIZE;
+
+	for (i = 0; i < ao_cec->rx_msg.len; i++) {
+		u8 byte;
+
+		meson_ao_cec_read(ao_cec, CEC_RX_MSG_0_HEADER + i, &byte, &ret);
+
+		ao_cec->rx_msg.msg[i] = byte;
+	}
+
+	if (ret)
+		goto rx_out;
+
+	cec_received_msg(ao_cec->adap, &ao_cec->rx_msg);
+
+rx_out:
+	/* Clear Interruption */
+	writel_relaxed(CEC_INTR_RX, ao_cec->base + CEC_INTR_CLR_REG);
+
+	/* Ack RX message */
+	meson_ao_cec_write(ao_cec, CEC_RX_MSG_CMD, RX_ACK_CURRENT, &ret);
+	meson_ao_cec_write(ao_cec, CEC_RX_MSG_CMD, RX_NO_OP, &ret);
+
+	/* Clear RX buffer */
+	meson_ao_cec_write(ao_cec, CEC_RX_CLEAR_BUF, CLEAR_START, &ret);
+	meson_ao_cec_write(ao_cec, CEC_RX_CLEAR_BUF, CLEAR_STOP, &ret);
+}
+
+static irqreturn_t meson_ao_cec_irq_thread(int irq, void *data)
+{
+	struct meson_ao_cec_device *ao_cec = data;
+	u32 stat = readl_relaxed(ao_cec->base + CEC_INTR_STAT_REG);
+
+	if (stat & CEC_INTR_TX)
+		meson_ao_cec_irq_tx(ao_cec);
+
+	meson_ao_cec_irq_rx(ao_cec);
+
+	return IRQ_HANDLED;
+}
+
+static int meson_ao_cec_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	struct meson_ao_cec_device *ao_cec = adap->priv;
+	int ret = 0;
+
+	meson_ao_cec_write(ao_cec, CEC_LOGICAL_ADDR0,
+			   LOGICAL_ADDR_DISABLE, &ret);
+	if (ret)
+		return ret;
+
+	ret = meson_ao_cec_clear(ao_cec);
+	if (ret)
+		return ret;
+
+	if (logical_addr == CEC_LOG_ADDR_INVALID)
+		return 0;
+
+	meson_ao_cec_write(ao_cec, CEC_LOGICAL_ADDR0,
+			   logical_addr & LOGICAL_ADDR_MASK, &ret);
+	if (ret)
+		return ret;
+
+	udelay(100);
+
+	meson_ao_cec_write(ao_cec, CEC_LOGICAL_ADDR0,
+			   (logical_addr & LOGICAL_ADDR_MASK) |
+			   LOGICAL_ADDR_VALID, &ret);
+
+	return ret;
+}
+
+static int meson_ao_cec_transmit(struct cec_adapter *adap, u8 attempts,
+				 u32 signal_free_time, struct cec_msg *msg)
+{
+	struct meson_ao_cec_device *ao_cec = adap->priv;
+	int i, ret = 0;
+	u8 reg;
+
+	meson_ao_cec_read(ao_cec, CEC_TX_MSG_STATUS, &reg, &ret);
+	if (ret)
+		return ret;
+
+	if (reg == TX_BUSY) {
+		dev_dbg(&ao_cec->pdev->dev, "%s: busy TX: aborting\n",
+			__func__);
+		meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_ABORT, &ret);
+	}
+
+	for (i = 0; i < msg->len; i++) {
+		meson_ao_cec_write(ao_cec, CEC_TX_MSG_0_HEADER + i,
+				   msg->msg[i], &ret);
+	}
+
+	meson_ao_cec_write(ao_cec, CEC_TX_MSG_LENGTH, msg->len - 1, &ret);
+	meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_REQ_CURRENT, &ret);
+
+	return ret;
+}
+
+static int meson_ao_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct meson_ao_cec_device *ao_cec = adap->priv;
+	int ret;
+
+	meson_ao_cec_irq_setup(ao_cec, false);
+
+	writel_bits_relaxed(CEC_GEN_CNTL_RESET, CEC_GEN_CNTL_RESET,
+			    ao_cec->base + CEC_GEN_CNTL_REG);
+
+	if (!enable)
+		return 0;
+
+	/* Enable gated clock (Normal mode). */
+	writel_bits_relaxed(CEC_GEN_CNTL_CLK_CTRL_MASK,
+			    FIELD_PREP(CEC_GEN_CNTL_CLK_CTRL_MASK,
+				       CEC_GEN_CNTL_CLK_ENABLE),
+			    ao_cec->base + CEC_GEN_CNTL_REG);
+
+	udelay(100);
+
+	/* Release Reset */
+	writel_bits_relaxed(CEC_GEN_CNTL_RESET, 0,
+			    ao_cec->base + CEC_GEN_CNTL_REG);
+
+	/* Clear buffers */
+	ret = meson_ao_cec_clear(ao_cec);
+	if (ret)
+		return ret;
+
+	/* CEC arbitration 3/5/7 bit time set. */
+	ret = meson_ao_cec_arbit_bit_time_set(ao_cec,
+					CEC_SIGNAL_FREE_TIME_RETRY,
+					0x118);
+	if (ret)
+		return ret;
+	ret = meson_ao_cec_arbit_bit_time_set(ao_cec,
+					CEC_SIGNAL_FREE_TIME_NEW_INITIATOR,
+					0x000);
+	if (ret)
+		return ret;
+	ret = meson_ao_cec_arbit_bit_time_set(ao_cec,
+					CEC_SIGNAL_FREE_TIME_NEXT_XFER,
+					0x2aa);
+	if (ret)
+		return ret;
+
+	meson_ao_cec_irq_setup(ao_cec, true);
+
+	return 0;
+}
+
+static const struct cec_adap_ops meson_ao_cec_ops = {
+	.adap_enable = meson_ao_cec_adap_enable,
+	.adap_log_addr = meson_ao_cec_set_log_addr,
+	.adap_transmit = meson_ao_cec_transmit,
+};
+
+static int meson_ao_cec_probe(struct platform_device *pdev)
+{
+	struct meson_ao_cec_device *ao_cec;
+	struct device *hdmi_dev;
+	struct resource *res;
+	int ret, irq;
+
+	hdmi_dev = cec_notifier_parse_hdmi_phandle(&pdev->dev);
+
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	ao_cec = devm_kzalloc(&pdev->dev, sizeof(*ao_cec), GFP_KERNEL);
+	if (!ao_cec)
+		return -ENOMEM;
+
+	spin_lock_init(&ao_cec->cec_reg_lock);
+
+	ao_cec->adap = cec_allocate_adapter(&meson_ao_cec_ops, ao_cec,
+					    "meson_ao_cec",
+					    CEC_CAP_DEFAULTS |
+					    CEC_CAP_CONNECTOR_INFO,
+					    1); /* Use 1 for now */
+	if (IS_ERR(ao_cec->adap))
+		return PTR_ERR(ao_cec->adap);
+
+	ao_cec->adap->owner = THIS_MODULE;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ao_cec->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ao_cec->base)) {
+		ret = PTR_ERR(ao_cec->base);
+		goto out_probe_adapter;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_threaded_irq(&pdev->dev, irq,
+					meson_ao_cec_irq,
+					meson_ao_cec_irq_thread,
+					0, NULL, ao_cec);
+	if (ret) {
+		dev_err(&pdev->dev, "irq request failed\n");
+		goto out_probe_adapter;
+	}
+
+	ao_cec->core = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(ao_cec->core)) {
+		dev_err(&pdev->dev, "core clock request failed\n");
+		ret = PTR_ERR(ao_cec->core);
+		goto out_probe_adapter;
+	}
+
+	ret = clk_prepare_enable(ao_cec->core);
+	if (ret) {
+		dev_err(&pdev->dev, "core clock enable failed\n");
+		goto out_probe_adapter;
+	}
+
+	ret = clk_set_rate(ao_cec->core, CEC_CLK_RATE);
+	if (ret) {
+		dev_err(&pdev->dev, "core clock set rate failed\n");
+		goto out_probe_clk;
+	}
+
+	device_reset_optional(&pdev->dev);
+
+	ao_cec->pdev = pdev;
+	platform_set_drvdata(pdev, ao_cec);
+
+	ao_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, NULL,
+							ao_cec->adap);
+	if (!ao_cec->notify) {
+		ret = -ENOMEM;
+		goto out_probe_clk;
+	}
+
+	ret = cec_register_adapter(ao_cec->adap, &pdev->dev);
+	if (ret < 0)
+		goto out_probe_notify;
+
+	/* Setup Hardware */
+	writel_relaxed(CEC_GEN_CNTL_RESET,
+		       ao_cec->base + CEC_GEN_CNTL_REG);
+
+	return 0;
+
+out_probe_notify:
+	cec_notifier_cec_adap_unregister(ao_cec->notify, ao_cec->adap);
+
+out_probe_clk:
+	clk_disable_unprepare(ao_cec->core);
+
+out_probe_adapter:
+	cec_delete_adapter(ao_cec->adap);
+
+	dev_err(&pdev->dev, "CEC controller registration failed\n");
+
+	return ret;
+}
+
+static int meson_ao_cec_remove(struct platform_device *pdev)
+{
+	struct meson_ao_cec_device *ao_cec = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(ao_cec->core);
+
+	cec_notifier_cec_adap_unregister(ao_cec->notify, ao_cec->adap);
+	cec_unregister_adapter(ao_cec->adap);
+
+	return 0;
+}
+
+static const struct of_device_id meson_ao_cec_of_match[] = {
+	{ .compatible = "amlogic,meson-gx-ao-cec", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, meson_ao_cec_of_match);
+
+static struct platform_driver meson_ao_cec_driver = {
+	.probe   = meson_ao_cec_probe,
+	.remove  = meson_ao_cec_remove,
+	.driver  = {
+		.name = "meson-ao-cec",
+		.of_match_table = of_match_ptr(meson_ao_cec_of_match),
+	},
+};
+
+module_platform_driver(meson_ao_cec_driver);
+
+MODULE_DESCRIPTION("Meson AO CEC Controller driver");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/cec/platform/s5p/Makefile b/drivers/media/cec/platform/s5p/Makefile
new file mode 100644
index 000000000000..92bf7b8557c5
--- /dev/null
+++ b/drivers/media/cec/platform/s5p/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CEC_SAMSUNG_S5P)	+= s5p-cec.o
+s5p-cec-y += s5p_cec.o exynos_hdmi_cecctrl.o
diff --git a/drivers/media/cec/platform/s5p/exynos_hdmi_cec.h b/drivers/media/cec/platform/s5p/exynos_hdmi_cec.h
new file mode 100644
index 000000000000..325db8c432bd
--- /dev/null
+++ b/drivers/media/cec/platform/s5p/exynos_hdmi_cec.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* drivers/media/platform/s5p-cec/exynos_hdmi_cec.h
+ *
+ * Copyright (c) 2010, 2014 Samsung Electronics
+ *		http://www.samsung.com/
+ *
+ * Header file for interface of Samsung Exynos hdmi cec hardware
+ */
+
+#ifndef _EXYNOS_HDMI_CEC_H_
+#define _EXYNOS_HDMI_CEC_H_ __FILE__
+
+#include <linux/regmap.h>
+#include "s5p_cec.h"
+
+void s5p_cec_set_divider(struct s5p_cec_dev *cec);
+void s5p_cec_enable_rx(struct s5p_cec_dev *cec);
+void s5p_cec_mask_rx_interrupts(struct s5p_cec_dev *cec);
+void s5p_cec_unmask_rx_interrupts(struct s5p_cec_dev *cec);
+void s5p_cec_mask_tx_interrupts(struct s5p_cec_dev *cec);
+void s5p_cec_unmask_tx_interrupts(struct s5p_cec_dev *cec);
+void s5p_cec_reset(struct s5p_cec_dev *cec);
+void s5p_cec_tx_reset(struct s5p_cec_dev *cec);
+void s5p_cec_rx_reset(struct s5p_cec_dev *cec);
+void s5p_cec_threshold(struct s5p_cec_dev *cec);
+void s5p_cec_copy_packet(struct s5p_cec_dev *cec, char *data,
+			 size_t count, u8 retries);
+void s5p_cec_set_addr(struct s5p_cec_dev *cec, u32 addr);
+u32 s5p_cec_get_status(struct s5p_cec_dev *cec);
+void s5p_clr_pending_tx(struct s5p_cec_dev *cec);
+void s5p_clr_pending_rx(struct s5p_cec_dev *cec);
+void s5p_cec_get_rx_buf(struct s5p_cec_dev *cec, u32 size, u8 *buffer);
+
+#endif /* _EXYNOS_HDMI_CEC_H_ */
diff --git a/drivers/media/cec/platform/s5p/exynos_hdmi_cecctrl.c b/drivers/media/cec/platform/s5p/exynos_hdmi_cecctrl.c
new file mode 100644
index 000000000000..eb981ebce362
--- /dev/null
+++ b/drivers/media/cec/platform/s5p/exynos_hdmi_cecctrl.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c
+ *
+ * Copyright (c) 2009, 2014 Samsung Electronics
+ *		http://www.samsung.com/
+ *
+ * cec ftn file for Samsung TVOUT driver
+ */
+
+#include <linux/io.h>
+#include <linux/device.h>
+
+#include "exynos_hdmi_cec.h"
+#include "regs-cec.h"
+
+#define S5P_HDMI_FIN			24000000
+#define CEC_DIV_RATIO			320000
+
+#define CEC_MESSAGE_BROADCAST_MASK	0x0F
+#define CEC_MESSAGE_BROADCAST		0x0F
+#define CEC_FILTER_THRESHOLD		0x15
+
+void s5p_cec_set_divider(struct s5p_cec_dev *cec)
+{
+	u32 div_ratio, div_val;
+	unsigned int reg;
+
+	div_ratio  = S5P_HDMI_FIN / CEC_DIV_RATIO - 1;
+
+	if (regmap_read(cec->pmu, EXYNOS_HDMI_PHY_CONTROL, &reg)) {
+		dev_err(cec->dev, "failed to read phy control\n");
+		return;
+	}
+
+	reg = (reg & ~(0x3FF << 16)) | (div_ratio << 16);
+
+	if (regmap_write(cec->pmu, EXYNOS_HDMI_PHY_CONTROL, reg)) {
+		dev_err(cec->dev, "failed to write phy control\n");
+		return;
+	}
+
+	div_val = CEC_DIV_RATIO * 0.00005 - 1;
+
+	writeb(0x0, cec->reg + S5P_CEC_DIVISOR_3);
+	writeb(0x0, cec->reg + S5P_CEC_DIVISOR_2);
+	writeb(0x0, cec->reg + S5P_CEC_DIVISOR_1);
+	writeb(div_val, cec->reg + S5P_CEC_DIVISOR_0);
+}
+
+void s5p_cec_enable_rx(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_RX_CTRL);
+	reg |= S5P_CEC_RX_CTRL_ENABLE;
+	writeb(reg, cec->reg + S5P_CEC_RX_CTRL);
+}
+
+void s5p_cec_mask_rx_interrupts(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
+	reg |= S5P_CEC_IRQ_RX_DONE;
+	reg |= S5P_CEC_IRQ_RX_ERROR;
+	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
+}
+
+void s5p_cec_unmask_rx_interrupts(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
+	reg &= ~S5P_CEC_IRQ_RX_DONE;
+	reg &= ~S5P_CEC_IRQ_RX_ERROR;
+	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
+}
+
+void s5p_cec_mask_tx_interrupts(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
+	reg |= S5P_CEC_IRQ_TX_DONE;
+	reg |= S5P_CEC_IRQ_TX_ERROR;
+	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
+}
+
+void s5p_cec_unmask_tx_interrupts(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
+	reg &= ~S5P_CEC_IRQ_TX_DONE;
+	reg &= ~S5P_CEC_IRQ_TX_ERROR;
+	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
+}
+
+void s5p_cec_reset(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	writeb(S5P_CEC_RX_CTRL_RESET, cec->reg + S5P_CEC_RX_CTRL);
+	writeb(S5P_CEC_TX_CTRL_RESET, cec->reg + S5P_CEC_TX_CTRL);
+
+	reg = readb(cec->reg + 0xc4);
+	reg &= ~0x1;
+	writeb(reg, cec->reg + 0xc4);
+}
+
+void s5p_cec_tx_reset(struct s5p_cec_dev *cec)
+{
+	writeb(S5P_CEC_TX_CTRL_RESET, cec->reg + S5P_CEC_TX_CTRL);
+}
+
+void s5p_cec_rx_reset(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	writeb(S5P_CEC_RX_CTRL_RESET, cec->reg + S5P_CEC_RX_CTRL);
+
+	reg = readb(cec->reg + 0xc4);
+	reg &= ~0x1;
+	writeb(reg, cec->reg + 0xc4);
+}
+
+void s5p_cec_threshold(struct s5p_cec_dev *cec)
+{
+	writeb(CEC_FILTER_THRESHOLD, cec->reg + S5P_CEC_RX_FILTER_TH);
+	writeb(0, cec->reg + S5P_CEC_RX_FILTER_CTRL);
+}
+
+void s5p_cec_copy_packet(struct s5p_cec_dev *cec, char *data,
+			 size_t count, u8 retries)
+{
+	int i = 0;
+	u8 reg;
+
+	while (i < count) {
+		writeb(data[i], cec->reg + (S5P_CEC_TX_BUFF0 + (i * 4)));
+		i++;
+	}
+
+	writeb(count, cec->reg + S5P_CEC_TX_BYTES);
+	reg = readb(cec->reg + S5P_CEC_TX_CTRL);
+	reg |= S5P_CEC_TX_CTRL_START;
+	reg &= ~0x70;
+	reg |= retries << 4;
+
+	if ((data[0] & CEC_MESSAGE_BROADCAST_MASK) == CEC_MESSAGE_BROADCAST) {
+		dev_dbg(cec->dev, "Broadcast");
+		reg |= S5P_CEC_TX_CTRL_BCAST;
+	} else {
+		dev_dbg(cec->dev, "No Broadcast");
+		reg &= ~S5P_CEC_TX_CTRL_BCAST;
+	}
+
+	writeb(reg, cec->reg + S5P_CEC_TX_CTRL);
+	dev_dbg(cec->dev, "cec-tx: cec count (%zu): %*ph", count,
+		(int)count, data);
+}
+
+void s5p_cec_set_addr(struct s5p_cec_dev *cec, u32 addr)
+{
+	writeb(addr & 0x0F, cec->reg + S5P_CEC_LOGIC_ADDR);
+}
+
+u32 s5p_cec_get_status(struct s5p_cec_dev *cec)
+{
+	u32 status = 0;
+
+	status = readb(cec->reg + S5P_CEC_STATUS_0) & 0xf;
+	status |= (readb(cec->reg + S5P_CEC_TX_STAT1) & 0xf) << 4;
+	status |= readb(cec->reg + S5P_CEC_STATUS_1) << 8;
+	status |= readb(cec->reg + S5P_CEC_STATUS_2) << 16;
+	status |= readb(cec->reg + S5P_CEC_STATUS_3) << 24;
+
+	dev_dbg(cec->dev, "status = 0x%x!\n", status);
+
+	return status;
+}
+
+void s5p_clr_pending_tx(struct s5p_cec_dev *cec)
+{
+	writeb(S5P_CEC_IRQ_TX_DONE | S5P_CEC_IRQ_TX_ERROR,
+	       cec->reg + S5P_CEC_IRQ_CLEAR);
+}
+
+void s5p_clr_pending_rx(struct s5p_cec_dev *cec)
+{
+	writeb(S5P_CEC_IRQ_RX_DONE | S5P_CEC_IRQ_RX_ERROR,
+	       cec->reg + S5P_CEC_IRQ_CLEAR);
+}
+
+void s5p_cec_get_rx_buf(struct s5p_cec_dev *cec, u32 size, u8 *buffer)
+{
+	u32 i = 0;
+	char debug[40];
+
+	while (i < size) {
+		buffer[i] = readb(cec->reg + S5P_CEC_RX_BUFF0 + (i * 4));
+		sprintf(debug + i * 2, "%02x ", buffer[i]);
+		i++;
+	}
+	dev_dbg(cec->dev, "cec-rx: cec size(%d): %s", size, debug);
+}
diff --git a/drivers/media/cec/platform/s5p/regs-cec.h b/drivers/media/cec/platform/s5p/regs-cec.h
new file mode 100644
index 000000000000..447f717028a2
--- /dev/null
+++ b/drivers/media/cec/platform/s5p/regs-cec.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* drivers/media/platform/s5p-cec/regs-cec.h
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *		http://www.samsung.com/
+ *
+ *  register header file for Samsung TVOUT driver
+ */
+
+#ifndef __EXYNOS_REGS__H
+#define __EXYNOS_REGS__H
+
+/*
+ * Register part
+ */
+#define S5P_CEC_STATUS_0			(0x0000)
+#define S5P_CEC_STATUS_1			(0x0004)
+#define S5P_CEC_STATUS_2			(0x0008)
+#define S5P_CEC_STATUS_3			(0x000C)
+#define S5P_CEC_IRQ_MASK			(0x0010)
+#define S5P_CEC_IRQ_CLEAR			(0x0014)
+#define S5P_CEC_LOGIC_ADDR			(0x0020)
+#define S5P_CEC_DIVISOR_0			(0x0030)
+#define S5P_CEC_DIVISOR_1			(0x0034)
+#define S5P_CEC_DIVISOR_2			(0x0038)
+#define S5P_CEC_DIVISOR_3			(0x003C)
+
+#define S5P_CEC_TX_CTRL				(0x0040)
+#define S5P_CEC_TX_BYTES			(0x0044)
+#define S5P_CEC_TX_STAT0			(0x0060)
+#define S5P_CEC_TX_STAT1			(0x0064)
+#define S5P_CEC_TX_BUFF0			(0x0080)
+#define S5P_CEC_TX_BUFF1			(0x0084)
+#define S5P_CEC_TX_BUFF2			(0x0088)
+#define S5P_CEC_TX_BUFF3			(0x008C)
+#define S5P_CEC_TX_BUFF4			(0x0090)
+#define S5P_CEC_TX_BUFF5			(0x0094)
+#define S5P_CEC_TX_BUFF6			(0x0098)
+#define S5P_CEC_TX_BUFF7			(0x009C)
+#define S5P_CEC_TX_BUFF8			(0x00A0)
+#define S5P_CEC_TX_BUFF9			(0x00A4)
+#define S5P_CEC_TX_BUFF10			(0x00A8)
+#define S5P_CEC_TX_BUFF11			(0x00AC)
+#define S5P_CEC_TX_BUFF12			(0x00B0)
+#define S5P_CEC_TX_BUFF13			(0x00B4)
+#define S5P_CEC_TX_BUFF14			(0x00B8)
+#define S5P_CEC_TX_BUFF15			(0x00BC)
+
+#define S5P_CEC_RX_CTRL				(0x00C0)
+#define S5P_CEC_RX_STAT0			(0x00E0)
+#define S5P_CEC_RX_STAT1			(0x00E4)
+#define S5P_CEC_RX_BUFF0			(0x0100)
+#define S5P_CEC_RX_BUFF1			(0x0104)
+#define S5P_CEC_RX_BUFF2			(0x0108)
+#define S5P_CEC_RX_BUFF3			(0x010C)
+#define S5P_CEC_RX_BUFF4			(0x0110)
+#define S5P_CEC_RX_BUFF5			(0x0114)
+#define S5P_CEC_RX_BUFF6			(0x0118)
+#define S5P_CEC_RX_BUFF7			(0x011C)
+#define S5P_CEC_RX_BUFF8			(0x0120)
+#define S5P_CEC_RX_BUFF9			(0x0124)
+#define S5P_CEC_RX_BUFF10			(0x0128)
+#define S5P_CEC_RX_BUFF11			(0x012C)
+#define S5P_CEC_RX_BUFF12			(0x0130)
+#define S5P_CEC_RX_BUFF13			(0x0134)
+#define S5P_CEC_RX_BUFF14			(0x0138)
+#define S5P_CEC_RX_BUFF15			(0x013C)
+
+#define S5P_CEC_RX_FILTER_CTRL			(0x0180)
+#define S5P_CEC_RX_FILTER_TH			(0x0184)
+
+/*
+ * Bit definition part
+ */
+#define S5P_CEC_IRQ_TX_DONE			(1<<0)
+#define S5P_CEC_IRQ_TX_ERROR			(1<<1)
+#define S5P_CEC_IRQ_RX_DONE			(1<<4)
+#define S5P_CEC_IRQ_RX_ERROR			(1<<5)
+
+#define S5P_CEC_TX_CTRL_START			(1<<0)
+#define S5P_CEC_TX_CTRL_BCAST			(1<<1)
+#define S5P_CEC_TX_CTRL_RETRY			(0x04<<4)
+#define S5P_CEC_TX_CTRL_RESET			(1<<7)
+
+#define S5P_CEC_RX_CTRL_ENABLE			(1<<0)
+#define S5P_CEC_RX_CTRL_RESET			(1<<7)
+
+#define S5P_CEC_LOGIC_ADDR_MASK			(0xF)
+
+/* PMU Registers for PHY */
+#define EXYNOS_HDMI_PHY_CONTROL			0x700
+
+#endif	/* __EXYNOS_REGS__H	*/
diff --git a/drivers/media/cec/platform/s5p/s5p_cec.c b/drivers/media/cec/platform/s5p/s5p_cec.c
new file mode 100644
index 000000000000..2a3e7ffefe0a
--- /dev/null
+++ b/drivers/media/cec/platform/s5p/s5p_cec.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* drivers/media/platform/s5p-cec/s5p_cec.c
+ *
+ * Samsung S5P CEC driver
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This driver is based on the "cec interface driver for exynos soc" by
+ * SangPil Moon.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+#include "exynos_hdmi_cec.h"
+#include "regs-cec.h"
+#include "s5p_cec.h"
+
+#define CEC_NAME	"s5p-cec"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+static int s5p_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct s5p_cec_dev *cec = cec_get_drvdata(adap);
+
+	if (enable) {
+		pm_runtime_get_sync(cec->dev);
+
+		s5p_cec_reset(cec);
+
+		s5p_cec_set_divider(cec);
+		s5p_cec_threshold(cec);
+
+		s5p_cec_unmask_tx_interrupts(cec);
+		s5p_cec_unmask_rx_interrupts(cec);
+		s5p_cec_enable_rx(cec);
+	} else {
+		s5p_cec_mask_tx_interrupts(cec);
+		s5p_cec_mask_rx_interrupts(cec);
+		pm_runtime_disable(cec->dev);
+	}
+
+	return 0;
+}
+
+static int s5p_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
+{
+	struct s5p_cec_dev *cec = cec_get_drvdata(adap);
+
+	s5p_cec_set_addr(cec, addr);
+	return 0;
+}
+
+static int s5p_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				 u32 signal_free_time, struct cec_msg *msg)
+{
+	struct s5p_cec_dev *cec = cec_get_drvdata(adap);
+
+	/*
+	 * Unclear if 0 retries are allowed by the hardware, so have 1 as
+	 * the minimum.
+	 */
+	s5p_cec_copy_packet(cec, msg->msg, msg->len, max(1, attempts - 1));
+	return 0;
+}
+
+static irqreturn_t s5p_cec_irq_handler(int irq, void *priv)
+{
+	struct s5p_cec_dev *cec = priv;
+	u32 status = 0;
+
+	status = s5p_cec_get_status(cec);
+
+	dev_dbg(cec->dev, "irq received\n");
+
+	if (status & CEC_STATUS_TX_DONE) {
+		if (status & CEC_STATUS_TX_NACK) {
+			dev_dbg(cec->dev, "CEC_STATUS_TX_NACK set\n");
+			cec->tx = STATE_NACK;
+		} else if (status & CEC_STATUS_TX_ERROR) {
+			dev_dbg(cec->dev, "CEC_STATUS_TX_ERROR set\n");
+			cec->tx = STATE_ERROR;
+		} else {
+			dev_dbg(cec->dev, "CEC_STATUS_TX_DONE\n");
+			cec->tx = STATE_DONE;
+		}
+		s5p_clr_pending_tx(cec);
+	}
+
+	if (status & CEC_STATUS_RX_DONE) {
+		if (status & CEC_STATUS_RX_ERROR) {
+			dev_dbg(cec->dev, "CEC_STATUS_RX_ERROR set\n");
+			s5p_cec_rx_reset(cec);
+			s5p_cec_enable_rx(cec);
+		} else {
+			dev_dbg(cec->dev, "CEC_STATUS_RX_DONE set\n");
+			if (cec->rx != STATE_IDLE)
+				dev_dbg(cec->dev, "Buffer overrun (worker did not process previous message)\n");
+			cec->rx = STATE_BUSY;
+			cec->msg.len = status >> 24;
+			cec->msg.rx_status = CEC_RX_STATUS_OK;
+			s5p_cec_get_rx_buf(cec, cec->msg.len,
+					cec->msg.msg);
+			cec->rx = STATE_DONE;
+			s5p_cec_enable_rx(cec);
+		}
+		/* Clear interrupt pending bit */
+		s5p_clr_pending_rx(cec);
+	}
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t s5p_cec_irq_handler_thread(int irq, void *priv)
+{
+	struct s5p_cec_dev *cec = priv;
+
+	dev_dbg(cec->dev, "irq processing thread\n");
+	switch (cec->tx) {
+	case STATE_DONE:
+		cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
+		cec->tx = STATE_IDLE;
+		break;
+	case STATE_NACK:
+		cec_transmit_done(cec->adap,
+			CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_NACK,
+			0, 1, 0, 0);
+		cec->tx = STATE_IDLE;
+		break;
+	case STATE_ERROR:
+		cec_transmit_done(cec->adap,
+			CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_ERROR,
+			0, 0, 0, 1);
+		cec->tx = STATE_IDLE;
+		break;
+	case STATE_BUSY:
+		dev_err(cec->dev, "state set to busy, this should not occur here\n");
+		break;
+	default:
+		break;
+	}
+
+	switch (cec->rx) {
+	case STATE_DONE:
+		cec_received_msg(cec->adap, &cec->msg);
+		cec->rx = STATE_IDLE;
+		break;
+	default:
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static const struct cec_adap_ops s5p_cec_adap_ops = {
+	.adap_enable = s5p_cec_adap_enable,
+	.adap_log_addr = s5p_cec_adap_log_addr,
+	.adap_transmit = s5p_cec_adap_transmit,
+};
+
+static int s5p_cec_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *hdmi_dev;
+	struct resource *res;
+	struct s5p_cec_dev *cec;
+	bool needs_hpd = of_property_read_bool(pdev->dev.of_node, "needs-hpd");
+	int ret;
+
+	hdmi_dev = cec_notifier_parse_hdmi_phandle(dev);
+
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	cec = devm_kzalloc(&pdev->dev, sizeof(*cec), GFP_KERNEL);
+	if (!cec)
+		return -ENOMEM;
+
+	cec->dev = dev;
+
+	cec->irq = platform_get_irq(pdev, 0);
+	if (cec->irq < 0)
+		return cec->irq;
+
+	ret = devm_request_threaded_irq(dev, cec->irq, s5p_cec_irq_handler,
+		s5p_cec_irq_handler_thread, 0, pdev->name, cec);
+	if (ret)
+		return ret;
+
+	cec->clk = devm_clk_get(dev, "hdmicec");
+	if (IS_ERR(cec->clk))
+		return PTR_ERR(cec->clk);
+
+	cec->pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
+						 "samsung,syscon-phandle");
+	if (IS_ERR(cec->pmu))
+		return -EPROBE_DEFER;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cec->reg = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cec->reg))
+		return PTR_ERR(cec->reg);
+
+	cec->adap = cec_allocate_adapter(&s5p_cec_adap_ops, cec, CEC_NAME,
+		CEC_CAP_DEFAULTS | (needs_hpd ? CEC_CAP_NEEDS_HPD : 0) |
+		CEC_CAP_CONNECTOR_INFO, 1);
+	ret = PTR_ERR_OR_ZERO(cec->adap);
+	if (ret)
+		return ret;
+
+	cec->notifier = cec_notifier_cec_adap_register(hdmi_dev, NULL,
+						       cec->adap);
+	if (!cec->notifier) {
+		ret = -ENOMEM;
+		goto err_delete_adapter;
+	}
+
+	ret = cec_register_adapter(cec->adap, &pdev->dev);
+	if (ret)
+		goto err_notifier;
+
+	platform_set_drvdata(pdev, cec);
+	pm_runtime_enable(dev);
+
+	dev_dbg(dev, "successfully probed\n");
+	return 0;
+
+err_notifier:
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+
+err_delete_adapter:
+	cec_delete_adapter(cec->adap);
+	return ret;
+}
+
+static int s5p_cec_remove(struct platform_device *pdev)
+{
+	struct s5p_cec_dev *cec = platform_get_drvdata(pdev);
+
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+	cec_unregister_adapter(cec->adap);
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static int __maybe_unused s5p_cec_runtime_suspend(struct device *dev)
+{
+	struct s5p_cec_dev *cec = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(cec->clk);
+	return 0;
+}
+
+static int __maybe_unused s5p_cec_runtime_resume(struct device *dev)
+{
+	struct s5p_cec_dev *cec = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(cec->clk);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static const struct dev_pm_ops s5p_cec_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(s5p_cec_runtime_suspend, s5p_cec_runtime_resume,
+			   NULL)
+};
+
+static const struct of_device_id s5p_cec_match[] = {
+	{
+		.compatible	= "samsung,s5p-cec",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, s5p_cec_match);
+
+static struct platform_driver s5p_cec_pdrv = {
+	.probe	= s5p_cec_probe,
+	.remove	= s5p_cec_remove,
+	.driver	= {
+		.name		= CEC_NAME,
+		.of_match_table	= s5p_cec_match,
+		.pm		= &s5p_cec_pm_ops,
+	},
+};
+
+module_platform_driver(s5p_cec_pdrv);
+
+MODULE_AUTHOR("Kamil Debski <kamil@wypas.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Samsung S5P CEC driver");
diff --git a/drivers/media/cec/platform/s5p/s5p_cec.h b/drivers/media/cec/platform/s5p/s5p_cec.h
new file mode 100644
index 000000000000..34d033b20f96
--- /dev/null
+++ b/drivers/media/cec/platform/s5p/s5p_cec.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* drivers/media/platform/s5p-cec/s5p_cec.h
+ *
+ * Samsung S5P HDMI CEC driver
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ */
+
+#ifndef _S5P_CEC_H_
+#define _S5P_CEC_H_ __FILE__
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <media/cec.h>
+
+#include "exynos_hdmi_cec.h"
+#include "regs-cec.h"
+#include "s5p_cec.h"
+
+#define CEC_NAME	"s5p-cec"
+
+#define CEC_STATUS_TX_RUNNING		(1 << 0)
+#define CEC_STATUS_TX_TRANSFERRING	(1 << 1)
+#define CEC_STATUS_TX_DONE		(1 << 2)
+#define CEC_STATUS_TX_ERROR		(1 << 3)
+#define CEC_STATUS_TX_NACK		(1 << 4)
+#define CEC_STATUS_TX_BYTES		(0xFF << 8)
+#define CEC_STATUS_RX_RUNNING		(1 << 16)
+#define CEC_STATUS_RX_RECEIVING		(1 << 17)
+#define CEC_STATUS_RX_DONE		(1 << 18)
+#define CEC_STATUS_RX_ERROR		(1 << 19)
+#define CEC_STATUS_RX_BCAST		(1 << 20)
+#define CEC_STATUS_RX_BYTES		(0xFF << 24)
+
+#define CEC_WORKER_TX_DONE		(1 << 0)
+#define CEC_WORKER_RX_MSG		(1 << 1)
+
+/* CEC Rx buffer size */
+#define CEC_RX_BUFF_SIZE		16
+/* CEC Tx buffer size */
+#define CEC_TX_BUFF_SIZE		16
+
+enum cec_state {
+	STATE_IDLE,
+	STATE_BUSY,
+	STATE_DONE,
+	STATE_NACK,
+	STATE_ERROR
+};
+
+struct cec_notifier;
+
+struct s5p_cec_dev {
+	struct cec_adapter	*adap;
+	struct clk		*clk;
+	struct device		*dev;
+	struct mutex		lock;
+	struct regmap           *pmu;
+	struct cec_notifier	*notifier;
+	int			irq;
+	void __iomem		*reg;
+
+	enum cec_state		rx;
+	enum cec_state		tx;
+	struct cec_msg		msg;
+};
+
+#endif /* _S5P_CEC_H_ */
diff --git a/drivers/media/cec/platform/seco/Makefile b/drivers/media/cec/platform/seco/Makefile
new file mode 100644
index 000000000000..aa1ca8ccdb8b
--- /dev/null
+++ b/drivers/media/cec/platform/seco/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CEC_SECO) += seco-cec.o
diff --git a/drivers/media/cec/platform/seco/seco-cec.c b/drivers/media/cec/platform/seco/seco-cec.c
new file mode 100644
index 000000000000..075dd79beb6f
--- /dev/null
+++ b/drivers/media/cec/platform/seco/seco-cec.c
@@ -0,0 +1,803 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * CEC driver for SECO X86 Boards
+ *
+ * Author:  Ettore Chimenti <ek5.chimenti@gmail.com>
+ * Copyright (C) 2018, SECO SpA.
+ * Copyright (C) 2018, Aidilab Srl.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* CEC Framework */
+#include <media/cec-notifier.h>
+
+#include "seco-cec.h"
+
+struct secocec_data {
+	struct device *dev;
+	struct platform_device *pdev;
+	struct cec_adapter *cec_adap;
+	struct cec_notifier *notifier;
+	struct rc_dev *ir;
+	char ir_input_phys[32];
+	int irq;
+};
+
+#define smb_wr16(cmd, data) smb_word_op(CMD_WORD_DATA, SECOCEC_MICRO_ADDRESS, \
+					     cmd, data, SMBUS_WRITE, NULL)
+#define smb_rd16(cmd, res) smb_word_op(CMD_WORD_DATA, SECOCEC_MICRO_ADDRESS, \
+				       cmd, 0, SMBUS_READ, res)
+
+static int smb_word_op(short data_format, u16 slave_addr, u8 cmd, u16 data,
+		       u8 operation, u16 *result)
+{
+	unsigned int count;
+	short _data_format;
+	int status = 0;
+
+	switch (data_format) {
+	case CMD_BYTE_DATA:
+		_data_format = BRA_SMB_CMD_BYTE_DATA;
+		break;
+	case CMD_WORD_DATA:
+		_data_format = BRA_SMB_CMD_WORD_DATA;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Active wait until ready */
+	for (count = 0; count <= SMBTIMEOUT; ++count) {
+		if (!(inb(HSTS) & BRA_INUSE_STS))
+			break;
+		udelay(SMB_POLL_UDELAY);
+	}
+
+	if (count > SMBTIMEOUT)
+		/* Reset the lock instead of failing */
+		outb(0xff, HSTS);
+
+	outb(0x00, HCNT);
+	outb((u8)(slave_addr & 0xfe) | operation, XMIT_SLVA);
+	outb(cmd, HCMD);
+	inb(HCNT);
+
+	if (operation == SMBUS_WRITE) {
+		outb((u8)data, HDAT0);
+		outb((u8)(data >> 8), HDAT1);
+	}
+
+	outb(BRA_START + _data_format, HCNT);
+
+	for (count = 0; count <= SMBTIMEOUT; count++) {
+		if (!(inb(HSTS) & BRA_HOST_BUSY))
+			break;
+		udelay(SMB_POLL_UDELAY);
+	}
+
+	if (count > SMBTIMEOUT) {
+		status = -EBUSY;
+		goto err;
+	}
+
+	if (inb(HSTS) & BRA_HSTS_ERR_MASK) {
+		status = -EIO;
+		goto err;
+	}
+
+	if (operation == SMBUS_READ)
+		*result = ((inb(HDAT0) & 0xff) + ((inb(HDAT1) & 0xff) << 8));
+
+err:
+	outb(0xff, HSTS);
+	return status;
+}
+
+static int secocec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct secocec_data *cec = cec_get_drvdata(adap);
+	struct device *dev = cec->dev;
+	u16 val = 0;
+	int status;
+
+	if (enable) {
+		/* Clear the status register */
+		status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+		if (status)
+			goto err;
+
+		status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+		if (status)
+			goto err;
+
+		/* Enable the interrupts */
+		status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+		if (status)
+			goto err;
+
+		status = smb_wr16(SECOCEC_ENABLE_REG_1,
+				  val | SECOCEC_ENABLE_REG_1_CEC);
+		if (status)
+			goto err;
+
+		dev_dbg(dev, "Device enabled");
+	} else {
+		/* Clear the status register */
+		status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+		status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+
+		/* Disable the interrupts */
+		status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+		status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
+				  ~SECOCEC_ENABLE_REG_1_CEC &
+				  ~SECOCEC_ENABLE_REG_1_IR);
+
+		dev_dbg(dev, "Device disabled");
+	}
+
+	return 0;
+err:
+	return status;
+}
+
+static int secocec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	u16 enable_val = 0;
+	int status;
+
+	/* Disable device */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &enable_val);
+	if (status)
+		return status;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  enable_val & ~SECOCEC_ENABLE_REG_1_CEC);
+	if (status)
+		return status;
+
+	/* Write logical address
+	 * NOTE: CEC_LOG_ADDR_INVALID is mapped to the 'Unregistered' LA
+	 */
+	status = smb_wr16(SECOCEC_DEVICE_LA, logical_addr & 0xf);
+	if (status)
+		return status;
+
+	/* Re-enable device */
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  enable_val | SECOCEC_ENABLE_REG_1_CEC);
+	if (status)
+		return status;
+
+	return 0;
+}
+
+static int secocec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				 u32 signal_free_time, struct cec_msg *msg)
+{
+	u16 payload_len, payload_id_len, destination, val = 0;
+	u8 *payload_msg;
+	int status;
+	u8 i;
+
+	/* Device msg len already accounts for header */
+	payload_id_len = msg->len - 1;
+
+	/* Send data length */
+	status = smb_wr16(SECOCEC_WRITE_DATA_LENGTH, payload_id_len);
+	if (status)
+		goto err;
+
+	/* Send Operation ID if present */
+	if (payload_id_len > 0) {
+		status = smb_wr16(SECOCEC_WRITE_OPERATION_ID, msg->msg[1]);
+		if (status)
+			goto err;
+	}
+	/* Send data if present */
+	if (payload_id_len > 1) {
+		/* Only data; */
+		payload_len = msg->len - 2;
+		payload_msg = &msg->msg[2];
+
+		/* Copy message into registers */
+		for (i = 0; i < payload_len; i += 2) {
+			/* hi byte */
+			val = payload_msg[i + 1] << 8;
+
+			/* lo byte */
+			val |= payload_msg[i];
+
+			status = smb_wr16(SECOCEC_WRITE_DATA_00 + i / 2, val);
+			if (status)
+				goto err;
+		}
+	}
+	/* Send msg source/destination and fire msg */
+	destination = msg->msg[0];
+	status = smb_wr16(SECOCEC_WRITE_BYTE0, destination);
+	if (status)
+		goto err;
+
+	return 0;
+
+err:
+	return status;
+}
+
+static void secocec_tx_done(struct cec_adapter *adap, u16 status_val)
+{
+	if (status_val & SECOCEC_STATUS_TX_ERROR_MASK) {
+		if (status_val & SECOCEC_STATUS_TX_NACK_ERROR)
+			cec_transmit_attempt_done(adap, CEC_TX_STATUS_NACK);
+		else
+			cec_transmit_attempt_done(adap, CEC_TX_STATUS_ERROR);
+	} else {
+		cec_transmit_attempt_done(adap, CEC_TX_STATUS_OK);
+	}
+
+	/* Reset status reg */
+	status_val = SECOCEC_STATUS_TX_ERROR_MASK |
+		SECOCEC_STATUS_MSG_SENT_MASK |
+		SECOCEC_STATUS_TX_NACK_ERROR;
+	smb_wr16(SECOCEC_STATUS, status_val);
+}
+
+static void secocec_rx_done(struct cec_adapter *adap, u16 status_val)
+{
+	struct secocec_data *cec = cec_get_drvdata(adap);
+	struct device *dev = cec->dev;
+	struct cec_msg msg = { };
+	bool flag_overflow = false;
+	u8 payload_len, i = 0;
+	u8 *payload_msg;
+	u16 val = 0;
+	int status;
+
+	if (status_val & SECOCEC_STATUS_RX_OVERFLOW_MASK) {
+		/* NOTE: Untested, it also might not be necessary */
+		dev_warn(dev, "Received more than 16 bytes. Discarding");
+		flag_overflow = true;
+	}
+
+	if (status_val & SECOCEC_STATUS_RX_ERROR_MASK) {
+		dev_warn(dev, "Message received with errors. Discarding");
+		status = -EIO;
+		goto rxerr;
+	}
+
+	/* Read message length */
+	status = smb_rd16(SECOCEC_READ_DATA_LENGTH, &val);
+	if (status)
+		return;
+
+	/* Device msg len already accounts for the header */
+	msg.len = min(val + 1, CEC_MAX_MSG_SIZE);
+
+	/* Read logical address */
+	status = smb_rd16(SECOCEC_READ_BYTE0, &val);
+	if (status)
+		return;
+
+	/* device stores source LA and destination */
+	msg.msg[0] = val;
+
+	/* Read operation ID */
+	status = smb_rd16(SECOCEC_READ_OPERATION_ID, &val);
+	if (status)
+		return;
+
+	msg.msg[1] = val;
+
+	/* Read data if present */
+	if (msg.len > 1) {
+		payload_len = msg.len - 2;
+		payload_msg = &msg.msg[2];
+
+		/* device stores 2 bytes in every 16-bit val */
+		for (i = 0; i < payload_len; i += 2) {
+			status = smb_rd16(SECOCEC_READ_DATA_00 + i / 2, &val);
+			if (status)
+				return;
+
+			/* low byte, skipping header */
+			payload_msg[i] = val & 0x00ff;
+
+			/* hi byte */
+			payload_msg[i + 1] = (val & 0xff00) >> 8;
+		}
+	}
+
+	cec_received_msg(cec->cec_adap, &msg);
+
+	/* Reset status reg */
+	status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK;
+	if (flag_overflow)
+		status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
+
+	status = smb_wr16(SECOCEC_STATUS, status_val);
+
+	return;
+
+rxerr:
+	/* Reset error reg */
+	status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK |
+		SECOCEC_STATUS_RX_ERROR_MASK;
+	if (flag_overflow)
+		status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
+	smb_wr16(SECOCEC_STATUS, status_val);
+}
+
+static const struct cec_adap_ops secocec_cec_adap_ops = {
+	/* Low-level callbacks */
+	.adap_enable = secocec_adap_enable,
+	.adap_log_addr = secocec_adap_log_addr,
+	.adap_transmit = secocec_adap_transmit,
+};
+
+#ifdef CONFIG_CEC_SECO_RC
+static int secocec_ir_probe(void *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	int status;
+	u16 val;
+
+	/* Prepare the RC input device */
+	cec->ir = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE);
+	if (!cec->ir)
+		return -ENOMEM;
+
+	snprintf(cec->ir_input_phys, sizeof(cec->ir_input_phys),
+		 "%s/input0", dev_name(dev));
+
+	cec->ir->device_name = dev_name(dev);
+	cec->ir->input_phys = cec->ir_input_phys;
+	cec->ir->input_id.bustype = BUS_HOST;
+	cec->ir->input_id.vendor = 0;
+	cec->ir->input_id.product = 0;
+	cec->ir->input_id.version = 1;
+	cec->ir->driver_name = SECOCEC_DEV_NAME;
+	cec->ir->allowed_protocols = RC_PROTO_BIT_RC5;
+	cec->ir->priv = cec;
+	cec->ir->map_name = RC_MAP_HAUPPAUGE;
+	cec->ir->timeout = MS_TO_NS(100);
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status != 0)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status != 0)
+		goto err;
+
+	/* Enable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status != 0)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  val | SECOCEC_ENABLE_REG_1_IR);
+	if (status != 0)
+		goto err;
+
+	dev_dbg(dev, "IR enabled");
+
+	status = devm_rc_register_device(dev, cec->ir);
+
+	if (status) {
+		dev_err(dev, "Failed to prepare input device");
+		cec->ir = NULL;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+
+	smb_wr16(SECOCEC_ENABLE_REG_1,
+		 val & ~SECOCEC_ENABLE_REG_1_IR);
+
+	dev_dbg(dev, "IR disabled");
+	return status;
+}
+
+static int secocec_ir_rx(struct secocec_data *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	u16 val, status, key, addr, toggle;
+
+	if (!cec->ir)
+		return -ENODEV;
+
+	status = smb_rd16(SECOCEC_IR_READ_DATA, &val);
+	if (status != 0)
+		goto err;
+
+	key = val & SECOCEC_IR_COMMAND_MASK;
+	addr = (val & SECOCEC_IR_ADDRESS_MASK) >> SECOCEC_IR_ADDRESS_SHL;
+	toggle = (val & SECOCEC_IR_TOGGLE_MASK) >> SECOCEC_IR_TOGGLE_SHL;
+
+	rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle);
+
+	dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x", key,
+		addr, toggle);
+
+	return 0;
+
+err:
+	dev_err(dev, "IR Receive message failed (%d)", status);
+	return -EIO;
+}
+#else
+static void secocec_ir_rx(struct secocec_data *priv)
+{
+}
+
+static int secocec_ir_probe(void *priv)
+{
+	return 0;
+}
+#endif
+
+static irqreturn_t secocec_irq_handler(int irq, void *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	u16 status_val, cec_val, val = 0;
+	int status;
+
+	/*  Read status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &status_val);
+	if (status)
+		goto err;
+
+	if (status_val & SECOCEC_STATUS_REG_1_CEC) {
+		/* Read CEC status register */
+		status = smb_rd16(SECOCEC_STATUS, &cec_val);
+		if (status)
+			goto err;
+
+		if (cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK)
+			secocec_rx_done(cec->cec_adap, cec_val);
+
+		if (cec_val & SECOCEC_STATUS_MSG_SENT_MASK)
+			secocec_tx_done(cec->cec_adap, cec_val);
+
+		if ((~cec_val & SECOCEC_STATUS_MSG_SENT_MASK) &&
+		    (~cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK))
+			dev_warn_once(dev,
+				      "Message not received or sent, but interrupt fired");
+
+		val = SECOCEC_STATUS_REG_1_CEC;
+	}
+
+	if (status_val & SECOCEC_STATUS_REG_1_IR) {
+		val |= SECOCEC_STATUS_REG_1_IR;
+
+		secocec_ir_rx(cec);
+	}
+
+	/*  Reset status register */
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status)
+		goto err;
+
+	return IRQ_HANDLED;
+
+err:
+	dev_err_once(dev, "IRQ: R/W SMBus operation failed (%d)", status);
+
+	/*  Reset status register */
+	val = SECOCEC_STATUS_REG_1_CEC | SECOCEC_STATUS_REG_1_IR;
+	smb_wr16(SECOCEC_STATUS_REG_1, val);
+
+	return IRQ_HANDLED;
+}
+
+struct cec_dmi_match {
+	const char *sys_vendor;
+	const char *product_name;
+	const char *devname;
+	const char *conn;
+};
+
+static const struct cec_dmi_match secocec_dmi_match_table[] = {
+	/* UDOO X86 */
+	{ "SECO", "UDOO x86", "0000:00:02.0", "Port B" },
+};
+
+static struct device *secocec_cec_find_hdmi_dev(struct device *dev,
+						const char **conn)
+{
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(secocec_dmi_match_table) ; ++i) {
+		const struct cec_dmi_match *m = &secocec_dmi_match_table[i];
+
+		if (dmi_match(DMI_SYS_VENDOR, m->sys_vendor) &&
+		    dmi_match(DMI_PRODUCT_NAME, m->product_name)) {
+			struct device *d;
+
+			/* Find the device, bail out if not yet registered */
+			d = bus_find_device_by_name(&pci_bus_type, NULL,
+						    m->devname);
+			if (!d)
+				return ERR_PTR(-EPROBE_DEFER);
+
+			put_device(d);
+			*conn = m->conn;
+			return d;
+		}
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static int secocec_acpi_probe(struct secocec_data *sdev)
+{
+	struct device *dev = sdev->dev;
+	struct gpio_desc *gpio;
+	int irq = 0;
+
+	gpio = devm_gpiod_get(dev, NULL, GPIOF_IN);
+	if (IS_ERR(gpio)) {
+		dev_err(dev, "Cannot request interrupt gpio");
+		return PTR_ERR(gpio);
+	}
+
+	irq = gpiod_to_irq(gpio);
+	if (irq < 0) {
+		dev_err(dev, "Cannot find valid irq");
+		return -ENODEV;
+	}
+	dev_dbg(dev, "irq-gpio is bound to IRQ %d", irq);
+
+	sdev->irq = irq;
+
+	return 0;
+}
+
+static int secocec_probe(struct platform_device *pdev)
+{
+	struct secocec_data *secocec;
+	struct device *dev = &pdev->dev;
+	struct device *hdmi_dev;
+	const char *conn = NULL;
+	int ret;
+	u16 val;
+
+	hdmi_dev = secocec_cec_find_hdmi_dev(&pdev->dev, &conn);
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	secocec = devm_kzalloc(dev, sizeof(*secocec), GFP_KERNEL);
+	if (!secocec)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, secocec);
+
+	/* Request SMBus regions */
+	if (!request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")) {
+		dev_err(dev, "Request memory region failed");
+		return -ENXIO;
+	}
+
+	secocec->pdev = pdev;
+	secocec->dev = dev;
+
+	if (!has_acpi_companion(dev)) {
+		dev_dbg(dev, "Cannot find any ACPI companion");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	ret = secocec_acpi_probe(secocec);
+	if (ret) {
+		dev_err(dev, "Cannot assign gpio to IRQ");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* Firmware version check */
+	ret = smb_rd16(SECOCEC_VERSION, &val);
+	if (ret) {
+		dev_err(dev, "Cannot check fw version");
+		goto err;
+	}
+	if (val < SECOCEC_LATEST_FW) {
+		dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x",
+			val, SECOCEC_LATEST_FW);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = devm_request_threaded_irq(dev,
+					secocec->irq,
+					NULL,
+					secocec_irq_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dev_name(&pdev->dev), secocec);
+
+	if (ret) {
+		dev_err(dev, "Cannot request IRQ %d", secocec->irq);
+		ret = -EIO;
+		goto err;
+	}
+
+	/* Allocate CEC adapter */
+	secocec->cec_adap = cec_allocate_adapter(&secocec_cec_adap_ops,
+						 secocec,
+						 dev_name(dev),
+						 CEC_CAP_DEFAULTS |
+						 CEC_CAP_CONNECTOR_INFO,
+						 SECOCEC_MAX_ADDRS);
+
+	if (IS_ERR(secocec->cec_adap)) {
+		ret = PTR_ERR(secocec->cec_adap);
+		goto err;
+	}
+
+	secocec->notifier = cec_notifier_cec_adap_register(hdmi_dev, conn,
+							   secocec->cec_adap);
+	if (!secocec->notifier) {
+		ret = -ENOMEM;
+		goto err_delete_adapter;
+	}
+
+	ret = cec_register_adapter(secocec->cec_adap, dev);
+	if (ret)
+		goto err_notifier;
+
+	ret = secocec_ir_probe(secocec);
+	if (ret)
+		goto err_notifier;
+
+	platform_set_drvdata(pdev, secocec);
+
+	dev_dbg(dev, "Device registered");
+
+	return ret;
+
+err_notifier:
+	cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
+err_delete_adapter:
+	cec_delete_adapter(secocec->cec_adap);
+err:
+	release_region(BRA_SMB_BASE_ADDR, 7);
+	dev_err(dev, "%s device probe failed\n", dev_name(dev));
+
+	return ret;
+}
+
+static int secocec_remove(struct platform_device *pdev)
+{
+	struct secocec_data *secocec = platform_get_drvdata(pdev);
+	u16 val;
+
+	if (secocec->ir) {
+		smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+
+		smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR);
+
+		dev_dbg(&pdev->dev, "IR disabled");
+	}
+	cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
+	cec_unregister_adapter(secocec->cec_adap);
+
+	release_region(BRA_SMB_BASE_ADDR, 7);
+
+	dev_dbg(&pdev->dev, "CEC device removed");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int secocec_suspend(struct device *dev)
+{
+	int status;
+	u16 val;
+
+	dev_dbg(dev, "Device going to suspend, disabling");
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status)
+		goto err;
+
+	/* Disable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
+			  ~SECOCEC_ENABLE_REG_1_CEC & ~SECOCEC_ENABLE_REG_1_IR);
+	if (status)
+		goto err;
+
+	return 0;
+
+err:
+	dev_err(dev, "Suspend failed (err: %d)", status);
+	return status;
+}
+
+static int secocec_resume(struct device *dev)
+{
+	int status;
+	u16 val;
+
+	dev_dbg(dev, "Resuming device from suspend");
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status)
+		goto err;
+
+	/* Enable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1, val | SECOCEC_ENABLE_REG_1_CEC);
+	if (status)
+		goto err;
+
+	dev_dbg(dev, "Device resumed from suspend");
+
+	return 0;
+
+err:
+	dev_err(dev, "Resume failed (err: %d)", status);
+	return status;
+}
+
+static SIMPLE_DEV_PM_OPS(secocec_pm_ops, secocec_suspend, secocec_resume);
+#define SECOCEC_PM_OPS (&secocec_pm_ops)
+#else
+#define SECOCEC_PM_OPS NULL
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id secocec_acpi_match[] = {
+	{"CEC00001", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(acpi, secocec_acpi_match);
+#endif
+
+static struct platform_driver secocec_driver = {
+	.driver = {
+		   .name = SECOCEC_DEV_NAME,
+		   .acpi_match_table = ACPI_PTR(secocec_acpi_match),
+		   .pm = SECOCEC_PM_OPS,
+	},
+	.probe = secocec_probe,
+	.remove = secocec_remove,
+};
+
+module_platform_driver(secocec_driver);
+
+MODULE_DESCRIPTION("SECO CEC X86 Driver");
+MODULE_AUTHOR("Ettore Chimenti <ek5.chimenti@gmail.com>");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/media/cec/platform/seco/seco-cec.h b/drivers/media/cec/platform/seco/seco-cec.h
new file mode 100644
index 000000000000..843de8c7dfd4
--- /dev/null
+++ b/drivers/media/cec/platform/seco/seco-cec.h
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * SECO X86 Boards CEC register defines
+ *
+ * Author:  Ettore Chimenti <ek5.chimenti@gmail.com>
+ * Copyright (C) 2018, SECO Spa.
+ * Copyright (C) 2018, Aidilab Srl.
+ */
+
+#ifndef __SECO_CEC_H__
+#define __SECO_CEC_H__
+
+#define SECOCEC_MAX_ADDRS		1
+#define SECOCEC_DEV_NAME		"secocec"
+#define SECOCEC_LATEST_FW		0x0f0b
+
+#define SMBTIMEOUT			0xfff
+#define SMB_POLL_UDELAY			10
+
+#define SMBUS_WRITE			0
+#define SMBUS_READ			1
+
+#define CMD_BYTE_DATA			0
+#define CMD_WORD_DATA			1
+
+/*
+ * SMBus definitons for Braswell
+ */
+
+#define BRA_DONE_STATUS			BIT(7)
+#define BRA_INUSE_STS			BIT(6)
+#define BRA_FAILED_OP			BIT(4)
+#define BRA_BUS_ERR			BIT(3)
+#define BRA_DEV_ERR			BIT(2)
+#define BRA_INTR			BIT(1)
+#define BRA_HOST_BUSY			BIT(0)
+#define BRA_HSTS_ERR_MASK   (BRA_FAILED_OP | BRA_BUS_ERR | BRA_DEV_ERR)
+
+#define BRA_PEC_EN			BIT(7)
+#define BRA_START			BIT(6)
+#define BRA_LAST__BYTE			BIT(5)
+#define BRA_INTREN			BIT(0)
+#define BRA_SMB_CMD			(7 << 2)
+#define BRA_SMB_CMD_QUICK		(0 << 2)
+#define BRA_SMB_CMD_BYTE		(1 << 2)
+#define BRA_SMB_CMD_BYTE_DATA		(2 << 2)
+#define BRA_SMB_CMD_WORD_DATA		(3 << 2)
+#define BRA_SMB_CMD_PROCESS_CALL	(4 << 2)
+#define BRA_SMB_CMD_BLOCK		(5 << 2)
+#define BRA_SMB_CMD_I2CREAD		(6 << 2)
+#define BRA_SMB_CMD_BLOCK_PROCESS	(7 << 2)
+
+#define BRA_SMB_BASE_ADDR  0x2040
+#define HSTS               (BRA_SMB_BASE_ADDR + 0)
+#define HCNT               (BRA_SMB_BASE_ADDR + 2)
+#define HCMD               (BRA_SMB_BASE_ADDR + 3)
+#define XMIT_SLVA          (BRA_SMB_BASE_ADDR + 4)
+#define HDAT0              (BRA_SMB_BASE_ADDR + 5)
+#define HDAT1              (BRA_SMB_BASE_ADDR + 6)
+
+/*
+ * Microcontroller Address
+ */
+
+#define SECOCEC_MICRO_ADDRESS		0x40
+
+/*
+ * STM32 SMBus Registers
+ */
+
+#define SECOCEC_VERSION			0x00
+#define SECOCEC_ENABLE_REG_1		0x01
+#define SECOCEC_ENABLE_REG_2		0x02
+#define SECOCEC_STATUS_REG_1		0x03
+#define SECOCEC_STATUS_REG_2		0x04
+
+#define SECOCEC_STATUS			0x28
+#define SECOCEC_DEVICE_LA		0x29
+#define SECOCEC_READ_OPERATION_ID	0x2a
+#define SECOCEC_READ_DATA_LENGTH	0x2b
+#define SECOCEC_READ_DATA_00		0x2c
+#define SECOCEC_READ_DATA_02		0x2d
+#define SECOCEC_READ_DATA_04		0x2e
+#define SECOCEC_READ_DATA_06		0x2f
+#define SECOCEC_READ_DATA_08		0x30
+#define SECOCEC_READ_DATA_10		0x31
+#define SECOCEC_READ_DATA_12		0x32
+#define SECOCEC_READ_BYTE0		0x33
+#define SECOCEC_WRITE_OPERATION_ID	0x34
+#define SECOCEC_WRITE_DATA_LENGTH	0x35
+#define SECOCEC_WRITE_DATA_00		0x36
+#define SECOCEC_WRITE_DATA_02		0x37
+#define SECOCEC_WRITE_DATA_04		0x38
+#define SECOCEC_WRITE_DATA_06		0x39
+#define SECOCEC_WRITE_DATA_08		0x3a
+#define SECOCEC_WRITE_DATA_10		0x3b
+#define SECOCEC_WRITE_DATA_12		0x3c
+#define SECOCEC_WRITE_BYTE0		0x3d
+
+#define SECOCEC_IR_READ_DATA		0x3e
+
+/*
+ * IR
+ */
+
+#define SECOCEC_IR_COMMAND_MASK		0x007F
+#define SECOCEC_IR_COMMAND_SHL		0
+#define SECOCEC_IR_ADDRESS_MASK		0x1F00
+#define SECOCEC_IR_ADDRESS_SHL		8
+#define SECOCEC_IR_TOGGLE_MASK		0x8000
+#define SECOCEC_IR_TOGGLE_SHL		15
+
+/*
+ * Enabling register
+ */
+
+#define SECOCEC_ENABLE_REG_1_CEC		0x1000
+#define SECOCEC_ENABLE_REG_1_IR			0x2000
+#define SECOCEC_ENABLE_REG_1_IR_PASSTHROUGH	0x4000
+
+/*
+ * Status register
+ */
+
+#define SECOCEC_STATUS_REG_1_CEC	SECOCEC_ENABLE_REG_1_CEC
+#define SECOCEC_STATUS_REG_1_IR		SECOCEC_ENABLE_REG_1_IR
+#define SECOCEC_STATUS_REG_1_IR_PASSTHR	SECOCEC_ENABLE_REG_1_IR_PASSTHR
+
+/*
+ * Status data
+ */
+
+#define SECOCEC_STATUS_MSG_RECEIVED_MASK	BIT(0)
+#define SECOCEC_STATUS_RX_ERROR_MASK		BIT(1)
+#define SECOCEC_STATUS_MSG_SENT_MASK		BIT(2)
+#define SECOCEC_STATUS_TX_ERROR_MASK		BIT(3)
+
+#define SECOCEC_STATUS_TX_NACK_ERROR		BIT(4)
+#define SECOCEC_STATUS_RX_OVERFLOW_MASK		BIT(5)
+
+#endif /* __SECO_CEC_H__ */
diff --git a/drivers/media/cec/platform/sti/Makefile b/drivers/media/cec/platform/sti/Makefile
new file mode 100644
index 000000000000..26ec5ba1c633
--- /dev/null
+++ b/drivers/media/cec/platform/sti/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CEC_STI) += stih-cec.o
diff --git a/drivers/media/cec/platform/sti/stih-cec.c b/drivers/media/cec/platform/sti/stih-cec.c
new file mode 100644
index 000000000000..f0c73e64b586
--- /dev/null
+++ b/drivers/media/cec/platform/sti/stih-cec.c
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * STIH4xx CEC driver
+ * Copyright (C) STMicroelectronics SA 2016
+ *
+ */
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+#define CEC_NAME	"stih-cec"
+
+/* CEC registers  */
+#define CEC_CLK_DIV           0x0
+#define CEC_CTRL              0x4
+#define CEC_IRQ_CTRL          0x8
+#define CEC_STATUS            0xC
+#define CEC_EXT_STATUS        0x10
+#define CEC_TX_CTRL           0x14
+#define CEC_FREE_TIME_THRESH  0x18
+#define CEC_BIT_TOUT_THRESH   0x1C
+#define CEC_BIT_PULSE_THRESH  0x20
+#define CEC_DATA              0x24
+#define CEC_TX_ARRAY_CTRL     0x28
+#define CEC_CTRL2             0x2C
+#define CEC_TX_ERROR_STS      0x30
+#define CEC_ADDR_TABLE        0x34
+#define CEC_DATA_ARRAY_CTRL   0x38
+#define CEC_DATA_ARRAY_STATUS 0x3C
+#define CEC_TX_DATA_BASE      0x40
+#define CEC_TX_DATA_TOP       0x50
+#define CEC_TX_DATA_SIZE      0x1
+#define CEC_RX_DATA_BASE      0x54
+#define CEC_RX_DATA_TOP       0x64
+#define CEC_RX_DATA_SIZE      0x1
+
+/* CEC_CTRL2 */
+#define CEC_LINE_INACTIVE_EN   BIT(0)
+#define CEC_AUTO_BUS_ERR_EN    BIT(1)
+#define CEC_STOP_ON_ARB_ERR_EN BIT(2)
+#define CEC_TX_REQ_WAIT_EN     BIT(3)
+
+/* CEC_DATA_ARRAY_CTRL */
+#define CEC_TX_ARRAY_EN          BIT(0)
+#define CEC_RX_ARRAY_EN          BIT(1)
+#define CEC_TX_ARRAY_RESET       BIT(2)
+#define CEC_RX_ARRAY_RESET       BIT(3)
+#define CEC_TX_N_OF_BYTES_IRQ_EN BIT(4)
+#define CEC_TX_STOP_ON_NACK      BIT(7)
+
+/* CEC_TX_ARRAY_CTRL */
+#define CEC_TX_N_OF_BYTES  0x1F
+#define CEC_TX_START       BIT(5)
+#define CEC_TX_AUTO_SOM_EN BIT(6)
+#define CEC_TX_AUTO_EOM_EN BIT(7)
+
+/* CEC_IRQ_CTRL */
+#define CEC_TX_DONE_IRQ_EN   BIT(0)
+#define CEC_ERROR_IRQ_EN     BIT(2)
+#define CEC_RX_DONE_IRQ_EN   BIT(3)
+#define CEC_RX_SOM_IRQ_EN    BIT(4)
+#define CEC_RX_EOM_IRQ_EN    BIT(5)
+#define CEC_FREE_TIME_IRQ_EN BIT(6)
+#define CEC_PIN_STS_IRQ_EN   BIT(7)
+
+/* CEC_CTRL */
+#define CEC_IN_FILTER_EN    BIT(0)
+#define CEC_PWR_SAVE_EN     BIT(1)
+#define CEC_EN              BIT(4)
+#define CEC_ACK_CTRL        BIT(5)
+#define CEC_RX_RESET_EN     BIT(6)
+#define CEC_IGNORE_RX_ERROR BIT(7)
+
+/* CEC_STATUS */
+#define CEC_TX_DONE_STS       BIT(0)
+#define CEC_TX_ACK_GET_STS    BIT(1)
+#define CEC_ERROR_STS         BIT(2)
+#define CEC_RX_DONE_STS       BIT(3)
+#define CEC_RX_SOM_STS        BIT(4)
+#define CEC_RX_EOM_STS        BIT(5)
+#define CEC_FREE_TIME_IRQ_STS BIT(6)
+#define CEC_PIN_STS           BIT(7)
+#define CEC_SBIT_TOUT_STS     BIT(8)
+#define CEC_DBIT_TOUT_STS     BIT(9)
+#define CEC_LPULSE_ERROR_STS  BIT(10)
+#define CEC_HPULSE_ERROR_STS  BIT(11)
+#define CEC_TX_ERROR          BIT(12)
+#define CEC_TX_ARB_ERROR      BIT(13)
+#define CEC_RX_ERROR_MIN      BIT(14)
+#define CEC_RX_ERROR_MAX      BIT(15)
+
+/* Signal free time in bit periods (2.4ms) */
+#define CEC_PRESENT_INIT_SFT 7
+#define CEC_NEW_INIT_SFT     5
+#define CEC_RETRANSMIT_SFT   3
+
+/* Constants for CEC_BIT_TOUT_THRESH register */
+#define CEC_SBIT_TOUT_47MS BIT(1)
+#define CEC_SBIT_TOUT_48MS (BIT(0) | BIT(1))
+#define CEC_SBIT_TOUT_50MS BIT(2)
+#define CEC_DBIT_TOUT_27MS BIT(0)
+#define CEC_DBIT_TOUT_28MS BIT(1)
+#define CEC_DBIT_TOUT_29MS (BIT(0) | BIT(1))
+
+/* Constants for CEC_BIT_PULSE_THRESH register */
+#define CEC_BIT_LPULSE_03MS BIT(1)
+#define CEC_BIT_HPULSE_03MS BIT(3)
+
+/* Constants for CEC_DATA_ARRAY_STATUS register */
+#define CEC_RX_N_OF_BYTES                     0x1F
+#define CEC_TX_N_OF_BYTES_SENT                BIT(5)
+#define CEC_RX_OVERRUN                        BIT(6)
+
+struct stih_cec {
+	struct cec_adapter	*adap;
+	struct device		*dev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	int			irq;
+	u32			irq_status;
+	struct cec_notifier	*notifier;
+};
+
+static int stih_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct stih_cec *cec = cec_get_drvdata(adap);
+
+	if (enable) {
+		/* The doc says (input TCLK_PERIOD * CEC_CLK_DIV) = 0.1ms */
+		unsigned long clk_freq = clk_get_rate(cec->clk);
+		u32 cec_clk_div = clk_freq / 10000;
+
+		writel(cec_clk_div, cec->regs + CEC_CLK_DIV);
+
+		/* Configuration of the durations activating a timeout */
+		writel(CEC_SBIT_TOUT_47MS | (CEC_DBIT_TOUT_28MS << 4),
+		       cec->regs + CEC_BIT_TOUT_THRESH);
+
+		/* Configuration of the smallest allowed duration for pulses */
+		writel(CEC_BIT_LPULSE_03MS | CEC_BIT_HPULSE_03MS,
+		       cec->regs + CEC_BIT_PULSE_THRESH);
+
+		/* Minimum received bit period threshold */
+		writel(BIT(5) | BIT(7), cec->regs + CEC_TX_CTRL);
+
+		/* Configuration of transceiver data arrays */
+		writel(CEC_TX_ARRAY_EN | CEC_RX_ARRAY_EN | CEC_TX_STOP_ON_NACK,
+		       cec->regs + CEC_DATA_ARRAY_CTRL);
+
+		/* Configuration of the control bits for CEC Transceiver */
+		writel(CEC_IN_FILTER_EN | CEC_EN | CEC_RX_RESET_EN,
+		       cec->regs + CEC_CTRL);
+
+		/* Clear logical addresses */
+		writel(0, cec->regs + CEC_ADDR_TABLE);
+
+		/* Clear the status register */
+		writel(0x0, cec->regs + CEC_STATUS);
+
+		/* Enable the interrupts */
+		writel(CEC_TX_DONE_IRQ_EN | CEC_RX_DONE_IRQ_EN |
+		       CEC_RX_SOM_IRQ_EN | CEC_RX_EOM_IRQ_EN |
+		       CEC_ERROR_IRQ_EN,
+		       cec->regs + CEC_IRQ_CTRL);
+
+	} else {
+		/* Clear logical addresses */
+		writel(0, cec->regs + CEC_ADDR_TABLE);
+
+		/* Clear the status register */
+		writel(0x0, cec->regs + CEC_STATUS);
+
+		/* Disable the interrupts */
+		writel(0, cec->regs + CEC_IRQ_CTRL);
+	}
+
+	return 0;
+}
+
+static int stih_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	struct stih_cec *cec = cec_get_drvdata(adap);
+	u32 reg = readl(cec->regs + CEC_ADDR_TABLE);
+
+	reg |= 1 << logical_addr;
+
+	if (logical_addr == CEC_LOG_ADDR_INVALID)
+		reg = 0;
+
+	writel(reg, cec->regs + CEC_ADDR_TABLE);
+
+	return 0;
+}
+
+static int stih_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				  u32 signal_free_time, struct cec_msg *msg)
+{
+	struct stih_cec *cec = cec_get_drvdata(adap);
+	int i;
+
+	/* Copy message into registers */
+	for (i = 0; i < msg->len; i++)
+		writeb(msg->msg[i], cec->regs + CEC_TX_DATA_BASE + i);
+
+	/*
+	 * Start transmission, configure hardware to add start and stop bits
+	 * Signal free time is handled by the hardware
+	 */
+	writel(CEC_TX_AUTO_SOM_EN | CEC_TX_AUTO_EOM_EN | CEC_TX_START |
+	       msg->len, cec->regs + CEC_TX_ARRAY_CTRL);
+
+	return 0;
+}
+
+static void stih_tx_done(struct stih_cec *cec, u32 status)
+{
+	if (status & CEC_TX_ERROR) {
+		cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_ERROR);
+		return;
+	}
+
+	if (status & CEC_TX_ARB_ERROR) {
+		cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_ARB_LOST);
+		return;
+	}
+
+	if (!(status & CEC_TX_ACK_GET_STS)) {
+		cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_NACK);
+		return;
+	}
+
+	cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_OK);
+}
+
+static void stih_rx_done(struct stih_cec *cec, u32 status)
+{
+	struct cec_msg msg = {};
+	u8 i;
+
+	if (status & CEC_RX_ERROR_MIN)
+		return;
+
+	if (status & CEC_RX_ERROR_MAX)
+		return;
+
+	msg.len = readl(cec->regs + CEC_DATA_ARRAY_STATUS) & 0x1f;
+
+	if (!msg.len)
+		return;
+
+	if (msg.len > 16)
+		msg.len = 16;
+
+	for (i = 0; i < msg.len; i++)
+		msg.msg[i] = readl(cec->regs + CEC_RX_DATA_BASE + i);
+
+	cec_received_msg(cec->adap, &msg);
+}
+
+static irqreturn_t stih_cec_irq_handler_thread(int irq, void *priv)
+{
+	struct stih_cec *cec = priv;
+
+	if (cec->irq_status & CEC_TX_DONE_STS)
+		stih_tx_done(cec, cec->irq_status);
+
+	if (cec->irq_status & CEC_RX_DONE_STS)
+		stih_rx_done(cec, cec->irq_status);
+
+	cec->irq_status = 0;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stih_cec_irq_handler(int irq, void *priv)
+{
+	struct stih_cec *cec = priv;
+
+	cec->irq_status = readl(cec->regs + CEC_STATUS);
+	writel(cec->irq_status, cec->regs + CEC_STATUS);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static const struct cec_adap_ops sti_cec_adap_ops = {
+	.adap_enable = stih_cec_adap_enable,
+	.adap_log_addr = stih_cec_adap_log_addr,
+	.adap_transmit = stih_cec_adap_transmit,
+};
+
+static int stih_cec_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct stih_cec *cec;
+	struct device *hdmi_dev;
+	int ret;
+
+	hdmi_dev = cec_notifier_parse_hdmi_phandle(dev);
+
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL);
+	if (!cec)
+		return -ENOMEM;
+
+	cec->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cec->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cec->regs))
+		return PTR_ERR(cec->regs);
+
+	cec->irq = platform_get_irq(pdev, 0);
+	if (cec->irq < 0)
+		return cec->irq;
+
+	ret = devm_request_threaded_irq(dev, cec->irq, stih_cec_irq_handler,
+					stih_cec_irq_handler_thread, 0,
+					pdev->name, cec);
+	if (ret)
+		return ret;
+
+	cec->clk = devm_clk_get(dev, "cec-clk");
+	if (IS_ERR(cec->clk)) {
+		dev_err(dev, "Cannot get cec clock\n");
+		return PTR_ERR(cec->clk);
+	}
+
+	cec->adap = cec_allocate_adapter(&sti_cec_adap_ops, cec, CEC_NAME,
+					 CEC_CAP_DEFAULTS |
+					 CEC_CAP_CONNECTOR_INFO,
+					 CEC_MAX_LOG_ADDRS);
+	ret = PTR_ERR_OR_ZERO(cec->adap);
+	if (ret)
+		return ret;
+
+	cec->notifier = cec_notifier_cec_adap_register(hdmi_dev, NULL,
+						       cec->adap);
+	if (!cec->notifier) {
+		ret = -ENOMEM;
+		goto err_delete_adapter;
+	}
+
+	ret = cec_register_adapter(cec->adap, &pdev->dev);
+	if (ret)
+		goto err_notifier;
+
+	platform_set_drvdata(pdev, cec);
+	return 0;
+
+err_notifier:
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+
+err_delete_adapter:
+	cec_delete_adapter(cec->adap);
+	return ret;
+}
+
+static int stih_cec_remove(struct platform_device *pdev)
+{
+	struct stih_cec *cec = platform_get_drvdata(pdev);
+
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+	cec_unregister_adapter(cec->adap);
+
+	return 0;
+}
+
+static const struct of_device_id stih_cec_match[] = {
+	{
+		.compatible	= "st,stih-cec",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, stih_cec_match);
+
+static struct platform_driver stih_cec_pdrv = {
+	.probe	= stih_cec_probe,
+	.remove = stih_cec_remove,
+	.driver = {
+		.name		= CEC_NAME,
+		.of_match_table	= stih_cec_match,
+	},
+};
+
+module_platform_driver(stih_cec_pdrv);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@linaro.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("STIH4xx CEC driver");
diff --git a/drivers/media/cec/platform/stm32/Makefile b/drivers/media/cec/platform/stm32/Makefile
new file mode 100644
index 000000000000..b7597a00befa
--- /dev/null
+++ b/drivers/media/cec/platform/stm32/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CEC_STM32) += stm32-cec.o
diff --git a/drivers/media/cec/platform/stm32/stm32-cec.c b/drivers/media/cec/platform/stm32/stm32-cec.c
new file mode 100644
index 000000000000..ea4b1ebfca99
--- /dev/null
+++ b/drivers/media/cec/platform/stm32/stm32-cec.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * STM32 CEC driver
+ * Copyright (C) STMicroelectronics SA 2017
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <media/cec.h>
+
+#define CEC_NAME	"stm32-cec"
+
+/* CEC registers  */
+#define CEC_CR		0x0000 /* Control Register */
+#define CEC_CFGR	0x0004 /* ConFiGuration Register */
+#define CEC_TXDR	0x0008 /* Rx data Register */
+#define CEC_RXDR	0x000C /* Rx data Register */
+#define CEC_ISR		0x0010 /* Interrupt and status Register */
+#define CEC_IER		0x0014 /* Interrupt enable Register */
+
+#define TXEOM		BIT(2)
+#define TXSOM		BIT(1)
+#define CECEN		BIT(0)
+
+#define LSTN		BIT(31)
+#define OAR		GENMASK(30, 16)
+#define SFTOP		BIT(8)
+#define BRDNOGEN	BIT(7)
+#define LBPEGEN		BIT(6)
+#define BREGEN		BIT(5)
+#define BRESTP		BIT(4)
+#define RXTOL		BIT(3)
+#define SFT		GENMASK(2, 0)
+#define FULL_CFG	(LSTN | SFTOP | BRDNOGEN | LBPEGEN | BREGEN | BRESTP \
+			 | RXTOL)
+
+#define TXACKE		BIT(12)
+#define TXERR		BIT(11)
+#define TXUDR		BIT(10)
+#define TXEND		BIT(9)
+#define TXBR		BIT(8)
+#define ARBLST		BIT(7)
+#define RXACKE		BIT(6)
+#define RXOVR		BIT(2)
+#define RXEND		BIT(1)
+#define RXBR		BIT(0)
+
+#define ALL_TX_IT	(TXEND | TXBR | TXACKE | TXERR | TXUDR | ARBLST)
+#define ALL_RX_IT	(RXEND | RXBR | RXACKE | RXOVR)
+
+/*
+ * 400 ms is the time it takes for one 16 byte message to be
+ * transferred and 5 is the maximum number of retries. Add
+ * another 100 ms as a margin.
+ */
+#define CEC_XFER_TIMEOUT_MS (5 * 400 + 100)
+
+struct stm32_cec {
+	struct cec_adapter	*adap;
+	struct device		*dev;
+	struct clk		*clk_cec;
+	struct clk		*clk_hdmi_cec;
+	struct reset_control	*rstc;
+	struct regmap		*regmap;
+	int			irq;
+	u32			irq_status;
+	struct cec_msg		rx_msg;
+	struct cec_msg		tx_msg;
+	int			tx_cnt;
+};
+
+static void cec_hw_init(struct stm32_cec *cec)
+{
+	regmap_update_bits(cec->regmap, CEC_CR, TXEOM | TXSOM | CECEN, 0);
+
+	regmap_update_bits(cec->regmap, CEC_IER, ALL_TX_IT | ALL_RX_IT,
+			   ALL_TX_IT | ALL_RX_IT);
+
+	regmap_update_bits(cec->regmap, CEC_CFGR, FULL_CFG, FULL_CFG);
+}
+
+static void stm32_tx_done(struct stm32_cec *cec, u32 status)
+{
+	if (status & (TXERR | TXUDR)) {
+		cec_transmit_done(cec->adap, CEC_TX_STATUS_ERROR,
+				  0, 0, 0, 1);
+		return;
+	}
+
+	if (status & ARBLST) {
+		cec_transmit_done(cec->adap, CEC_TX_STATUS_ARB_LOST,
+				  1, 0, 0, 0);
+		return;
+	}
+
+	if (status & TXACKE) {
+		cec_transmit_done(cec->adap, CEC_TX_STATUS_NACK,
+				  0, 1, 0, 0);
+		return;
+	}
+
+	if (cec->irq_status & TXBR) {
+		/* send next byte */
+		if (cec->tx_cnt < cec->tx_msg.len)
+			regmap_write(cec->regmap, CEC_TXDR,
+				     cec->tx_msg.msg[cec->tx_cnt++]);
+
+		/* TXEOM is set to command transmission of the last byte */
+		if (cec->tx_cnt == cec->tx_msg.len)
+			regmap_update_bits(cec->regmap, CEC_CR, TXEOM, TXEOM);
+	}
+
+	if (cec->irq_status & TXEND)
+		cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
+}
+
+static void stm32_rx_done(struct stm32_cec *cec, u32 status)
+{
+	if (cec->irq_status & (RXACKE | RXOVR)) {
+		cec->rx_msg.len = 0;
+		return;
+	}
+
+	if (cec->irq_status & RXBR) {
+		u32 val;
+
+		regmap_read(cec->regmap, CEC_RXDR, &val);
+		cec->rx_msg.msg[cec->rx_msg.len++] = val & 0xFF;
+	}
+
+	if (cec->irq_status & RXEND) {
+		cec_received_msg(cec->adap, &cec->rx_msg);
+		cec->rx_msg.len = 0;
+	}
+}
+
+static irqreturn_t stm32_cec_irq_thread(int irq, void *arg)
+{
+	struct stm32_cec *cec = arg;
+
+	if (cec->irq_status & ALL_TX_IT)
+		stm32_tx_done(cec, cec->irq_status);
+
+	if (cec->irq_status & ALL_RX_IT)
+		stm32_rx_done(cec, cec->irq_status);
+
+	cec->irq_status = 0;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stm32_cec_irq_handler(int irq, void *arg)
+{
+	struct stm32_cec *cec = arg;
+
+	regmap_read(cec->regmap, CEC_ISR, &cec->irq_status);
+
+	regmap_update_bits(cec->regmap, CEC_ISR,
+			   ALL_TX_IT | ALL_RX_IT,
+			   ALL_TX_IT | ALL_RX_IT);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static int stm32_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct stm32_cec *cec = adap->priv;
+	int ret = 0;
+
+	if (enable) {
+		ret = clk_enable(cec->clk_cec);
+		if (ret)
+			dev_err(cec->dev, "fail to enable cec clock\n");
+
+		clk_enable(cec->clk_hdmi_cec);
+		regmap_update_bits(cec->regmap, CEC_CR, CECEN, CECEN);
+	} else {
+		clk_disable(cec->clk_cec);
+		clk_disable(cec->clk_hdmi_cec);
+		regmap_update_bits(cec->regmap, CEC_CR, CECEN, 0);
+	}
+
+	return ret;
+}
+
+static int stm32_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	struct stm32_cec *cec = adap->priv;
+	u32 oar = (1 << logical_addr) << 16;
+	u32 val;
+
+	/* Poll every 100µs the register CEC_CR to wait end of transmission */
+	regmap_read_poll_timeout(cec->regmap, CEC_CR, val, !(val & TXSOM),
+				 100, CEC_XFER_TIMEOUT_MS * 1000);
+	regmap_update_bits(cec->regmap, CEC_CR, CECEN, 0);
+
+	if (logical_addr == CEC_LOG_ADDR_INVALID)
+		regmap_update_bits(cec->regmap, CEC_CFGR, OAR, 0);
+	else
+		regmap_update_bits(cec->regmap, CEC_CFGR, oar, oar);
+
+	regmap_update_bits(cec->regmap, CEC_CR, CECEN, CECEN);
+
+	return 0;
+}
+
+static int stm32_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				   u32 signal_free_time, struct cec_msg *msg)
+{
+	struct stm32_cec *cec = adap->priv;
+
+	/* Copy message */
+	cec->tx_msg = *msg;
+	cec->tx_cnt = 0;
+
+	/*
+	 * If the CEC message consists of only one byte,
+	 * TXEOM must be set before of TXSOM.
+	 */
+	if (cec->tx_msg.len == 1)
+		regmap_update_bits(cec->regmap, CEC_CR, TXEOM, TXEOM);
+
+	/* TXSOM is set to command transmission of the first byte */
+	regmap_update_bits(cec->regmap, CEC_CR, TXSOM, TXSOM);
+
+	/* Write the header (first byte of message) */
+	regmap_write(cec->regmap, CEC_TXDR, cec->tx_msg.msg[0]);
+	cec->tx_cnt++;
+
+	return 0;
+}
+
+static const struct cec_adap_ops stm32_cec_adap_ops = {
+	.adap_enable = stm32_cec_adap_enable,
+	.adap_log_addr = stm32_cec_adap_log_addr,
+	.adap_transmit = stm32_cec_adap_transmit,
+};
+
+static const struct regmap_config stm32_cec_regmap_cfg = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = sizeof(u32),
+	.max_register = 0x14,
+	.fast_io = true,
+};
+
+static int stm32_cec_probe(struct platform_device *pdev)
+{
+	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_PHYS_ADDR | CEC_MODE_MONITOR_ALL;
+	struct resource *res;
+	struct stm32_cec *cec;
+	void __iomem *mmio;
+	int ret;
+
+	cec = devm_kzalloc(&pdev->dev, sizeof(*cec), GFP_KERNEL);
+	if (!cec)
+		return -ENOMEM;
+
+	cec->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mmio = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mmio))
+		return PTR_ERR(mmio);
+
+	cec->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "cec", mmio,
+						&stm32_cec_regmap_cfg);
+
+	if (IS_ERR(cec->regmap))
+		return PTR_ERR(cec->regmap);
+
+	cec->irq = platform_get_irq(pdev, 0);
+	if (cec->irq < 0)
+		return cec->irq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, cec->irq,
+					stm32_cec_irq_handler,
+					stm32_cec_irq_thread,
+					0,
+					pdev->name, cec);
+	if (ret)
+		return ret;
+
+	cec->clk_cec = devm_clk_get(&pdev->dev, "cec");
+	if (IS_ERR(cec->clk_cec)) {
+		if (PTR_ERR(cec->clk_cec) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Cannot get cec clock\n");
+
+		return PTR_ERR(cec->clk_cec);
+	}
+
+	ret = clk_prepare(cec->clk_cec);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to prepare cec clock\n");
+		return ret;
+	}
+
+	cec->clk_hdmi_cec = devm_clk_get(&pdev->dev, "hdmi-cec");
+	if (IS_ERR(cec->clk_hdmi_cec) &&
+	    PTR_ERR(cec->clk_hdmi_cec) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	if (!IS_ERR(cec->clk_hdmi_cec)) {
+		ret = clk_prepare(cec->clk_hdmi_cec);
+		if (ret) {
+			dev_err(&pdev->dev, "Can't prepare hdmi-cec clock\n");
+			return ret;
+		}
+	}
+
+	/*
+	 * CEC_CAP_PHYS_ADDR caps should be removed when a cec notifier is
+	 * available for example when a drm driver can provide edid
+	 */
+	cec->adap = cec_allocate_adapter(&stm32_cec_adap_ops, cec,
+			CEC_NAME, caps,	CEC_MAX_LOG_ADDRS);
+	ret = PTR_ERR_OR_ZERO(cec->adap);
+	if (ret)
+		return ret;
+
+	ret = cec_register_adapter(cec->adap, &pdev->dev);
+	if (ret) {
+		cec_delete_adapter(cec->adap);
+		return ret;
+	}
+
+	cec_hw_init(cec);
+
+	platform_set_drvdata(pdev, cec);
+
+	return 0;
+}
+
+static int stm32_cec_remove(struct platform_device *pdev)
+{
+	struct stm32_cec *cec = platform_get_drvdata(pdev);
+
+	clk_unprepare(cec->clk_cec);
+	clk_unprepare(cec->clk_hdmi_cec);
+
+	cec_unregister_adapter(cec->adap);
+
+	return 0;
+}
+
+static const struct of_device_id stm32_cec_of_match[] = {
+	{ .compatible = "st,stm32-cec" },
+	{ /* end node */ }
+};
+MODULE_DEVICE_TABLE(of, stm32_cec_of_match);
+
+static struct platform_driver stm32_cec_driver = {
+	.probe  = stm32_cec_probe,
+	.remove = stm32_cec_remove,
+	.driver = {
+		.name		= CEC_NAME,
+		.of_match_table = stm32_cec_of_match,
+	},
+};
+
+module_platform_driver(stm32_cec_driver);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
+MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 Consumer Electronics Control");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/cec/platform/tegra/Makefile b/drivers/media/cec/platform/tegra/Makefile
new file mode 100644
index 000000000000..275d1c019d49
--- /dev/null
+++ b/drivers/media/cec/platform/tegra/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CEC_TEGRA)	+= tegra_cec.o
diff --git a/drivers/media/cec/platform/tegra/tegra_cec.c b/drivers/media/cec/platform/tegra/tegra_cec.c
new file mode 100644
index 000000000000..1ac0c70a5981
--- /dev/null
+++ b/drivers/media/cec/platform/tegra/tegra_cec.c
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Tegra CEC implementation
+ *
+ * The original 3.10 CEC driver using a custom API:
+ *
+ * Copyright (c) 2012-2015, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Conversion to the CEC framework and to the mainline kernel:
+ *
+ * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/clk/tegra.h>
+
+#include <media/cec-notifier.h>
+
+#include "tegra_cec.h"
+
+#define TEGRA_CEC_NAME "tegra-cec"
+
+struct tegra_cec {
+	struct cec_adapter	*adap;
+	struct device		*dev;
+	struct clk		*clk;
+	void __iomem		*cec_base;
+	struct cec_notifier	*notifier;
+	int			tegra_cec_irq;
+	bool			rx_done;
+	bool			tx_done;
+	int			tx_status;
+	u8			rx_buf[CEC_MAX_MSG_SIZE];
+	u8			rx_buf_cnt;
+	u32			tx_buf[CEC_MAX_MSG_SIZE];
+	u8			tx_buf_cur;
+	u8			tx_buf_cnt;
+};
+
+static inline u32 cec_read(struct tegra_cec *cec, u32 reg)
+{
+	return readl(cec->cec_base + reg);
+}
+
+static inline void cec_write(struct tegra_cec *cec, u32 reg, u32 val)
+{
+	writel(val, cec->cec_base + reg);
+}
+
+static void tegra_cec_error_recovery(struct tegra_cec *cec)
+{
+	u32 hw_ctrl;
+
+	hw_ctrl = cec_read(cec, TEGRA_CEC_HW_CONTROL);
+	cec_write(cec, TEGRA_CEC_HW_CONTROL, 0);
+	cec_write(cec, TEGRA_CEC_INT_STAT, 0xffffffff);
+	cec_write(cec, TEGRA_CEC_HW_CONTROL, hw_ctrl);
+}
+
+static irqreturn_t tegra_cec_irq_thread_handler(int irq, void *data)
+{
+	struct device *dev = data;
+	struct tegra_cec *cec = dev_get_drvdata(dev);
+
+	if (cec->tx_done) {
+		cec_transmit_attempt_done(cec->adap, cec->tx_status);
+		cec->tx_done = false;
+	}
+	if (cec->rx_done) {
+		struct cec_msg msg = {};
+
+		msg.len = cec->rx_buf_cnt;
+		memcpy(msg.msg, cec->rx_buf, msg.len);
+		cec_received_msg(cec->adap, &msg);
+		cec->rx_done = false;
+		cec->rx_buf_cnt = 0;
+	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t tegra_cec_irq_handler(int irq, void *data)
+{
+	struct device *dev = data;
+	struct tegra_cec *cec = dev_get_drvdata(dev);
+	u32 status, mask;
+
+	status = cec_read(cec, TEGRA_CEC_INT_STAT);
+	mask = cec_read(cec, TEGRA_CEC_INT_MASK);
+
+	status &= mask;
+
+	if (!status)
+		return IRQ_HANDLED;
+
+	if (status & TEGRA_CEC_INT_STAT_TX_REGISTER_UNDERRUN) {
+		dev_err(dev, "TX underrun, interrupt timing issue!\n");
+
+		tegra_cec_error_recovery(cec);
+		cec_write(cec, TEGRA_CEC_INT_MASK,
+			  mask & ~TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY);
+
+		cec->tx_done = true;
+		cec->tx_status = CEC_TX_STATUS_ERROR;
+		return IRQ_WAKE_THREAD;
+	}
+
+	if ((status & TEGRA_CEC_INT_STAT_TX_ARBITRATION_FAILED) ||
+		   (status & TEGRA_CEC_INT_STAT_TX_BUS_ANOMALY_DETECTED)) {
+		tegra_cec_error_recovery(cec);
+		cec_write(cec, TEGRA_CEC_INT_MASK,
+			  mask & ~TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY);
+
+		cec->tx_done = true;
+		if (status & TEGRA_CEC_INT_STAT_TX_BUS_ANOMALY_DETECTED)
+			cec->tx_status = CEC_TX_STATUS_LOW_DRIVE;
+		else
+			cec->tx_status = CEC_TX_STATUS_ARB_LOST;
+		return IRQ_WAKE_THREAD;
+	}
+
+	if (status & TEGRA_CEC_INT_STAT_TX_FRAME_TRANSMITTED) {
+		cec_write(cec, TEGRA_CEC_INT_STAT,
+			  TEGRA_CEC_INT_STAT_TX_FRAME_TRANSMITTED);
+
+		if (status & TEGRA_CEC_INT_STAT_TX_FRAME_OR_BLOCK_NAKD) {
+			tegra_cec_error_recovery(cec);
+
+			cec->tx_done = true;
+			cec->tx_status = CEC_TX_STATUS_NACK;
+		} else {
+			cec->tx_done = true;
+			cec->tx_status = CEC_TX_STATUS_OK;
+		}
+		return IRQ_WAKE_THREAD;
+	}
+
+	if (status & TEGRA_CEC_INT_STAT_TX_FRAME_OR_BLOCK_NAKD)
+		dev_warn(dev, "TX NAKed on the fly!\n");
+
+	if (status & TEGRA_CEC_INT_STAT_TX_REGISTER_EMPTY) {
+		if (cec->tx_buf_cur == cec->tx_buf_cnt) {
+			cec_write(cec, TEGRA_CEC_INT_MASK,
+				  mask & ~TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY);
+		} else {
+			cec_write(cec, TEGRA_CEC_TX_REGISTER,
+				  cec->tx_buf[cec->tx_buf_cur++]);
+			cec_write(cec, TEGRA_CEC_INT_STAT,
+				  TEGRA_CEC_INT_STAT_TX_REGISTER_EMPTY);
+		}
+	}
+
+	if (status & TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED) {
+		cec_write(cec, TEGRA_CEC_INT_STAT,
+			  TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED);
+		cec->rx_done = false;
+		cec->rx_buf_cnt = 0;
+	}
+	if (status & TEGRA_CEC_INT_STAT_RX_REGISTER_FULL) {
+		u32 v;
+
+		cec_write(cec, TEGRA_CEC_INT_STAT,
+			  TEGRA_CEC_INT_STAT_RX_REGISTER_FULL);
+		v = cec_read(cec, TEGRA_CEC_RX_REGISTER);
+		if (cec->rx_buf_cnt < CEC_MAX_MSG_SIZE)
+			cec->rx_buf[cec->rx_buf_cnt++] = v & 0xff;
+		if (v & TEGRA_CEC_RX_REGISTER_EOM) {
+			cec->rx_done = true;
+			return IRQ_WAKE_THREAD;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int tegra_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct tegra_cec *cec = adap->priv;
+
+	cec->rx_buf_cnt = 0;
+	cec->tx_buf_cnt = 0;
+	cec->tx_buf_cur = 0;
+
+	cec_write(cec, TEGRA_CEC_HW_CONTROL, 0);
+	cec_write(cec, TEGRA_CEC_INT_MASK, 0);
+	cec_write(cec, TEGRA_CEC_INT_STAT, 0xffffffff);
+	cec_write(cec, TEGRA_CEC_SW_CONTROL, 0);
+
+	if (!enable)
+		return 0;
+
+	cec_write(cec, TEGRA_CEC_INPUT_FILTER, (1U << 31) | 0x20);
+
+	cec_write(cec, TEGRA_CEC_RX_TIMING_0,
+		  (0x7a << TEGRA_CEC_RX_TIM0_START_BIT_MAX_LO_TIME_SHIFT) |
+		  (0x6d << TEGRA_CEC_RX_TIM0_START_BIT_MIN_LO_TIME_SHIFT) |
+		  (0x93 << TEGRA_CEC_RX_TIM0_START_BIT_MAX_DURATION_SHIFT) |
+		  (0x86 << TEGRA_CEC_RX_TIM0_START_BIT_MIN_DURATION_SHIFT));
+
+	cec_write(cec, TEGRA_CEC_RX_TIMING_1,
+		  (0x35 << TEGRA_CEC_RX_TIM1_DATA_BIT_MAX_LO_TIME_SHIFT) |
+		  (0x21 << TEGRA_CEC_RX_TIM1_DATA_BIT_SAMPLE_TIME_SHIFT) |
+		  (0x56 << TEGRA_CEC_RX_TIM1_DATA_BIT_MAX_DURATION_SHIFT) |
+		  (0x40 << TEGRA_CEC_RX_TIM1_DATA_BIT_MIN_DURATION_SHIFT));
+
+	cec_write(cec, TEGRA_CEC_RX_TIMING_2,
+		  (0x50 << TEGRA_CEC_RX_TIM2_END_OF_BLOCK_TIME_SHIFT));
+
+	cec_write(cec, TEGRA_CEC_TX_TIMING_0,
+		  (0x74 << TEGRA_CEC_TX_TIM0_START_BIT_LO_TIME_SHIFT) |
+		  (0x8d << TEGRA_CEC_TX_TIM0_START_BIT_DURATION_SHIFT) |
+		  (0x08 << TEGRA_CEC_TX_TIM0_BUS_XITION_TIME_SHIFT) |
+		  (0x71 << TEGRA_CEC_TX_TIM0_BUS_ERROR_LO_TIME_SHIFT));
+
+	cec_write(cec, TEGRA_CEC_TX_TIMING_1,
+		  (0x2f << TEGRA_CEC_TX_TIM1_LO_DATA_BIT_LO_TIME_SHIFT) |
+		  (0x13 << TEGRA_CEC_TX_TIM1_HI_DATA_BIT_LO_TIME_SHIFT) |
+		  (0x4b << TEGRA_CEC_TX_TIM1_DATA_BIT_DURATION_SHIFT) |
+		  (0x21 << TEGRA_CEC_TX_TIM1_ACK_NAK_BIT_SAMPLE_TIME_SHIFT));
+
+	cec_write(cec, TEGRA_CEC_TX_TIMING_2,
+		  (0x07 << TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_ADDITIONAL_FRAME_SHIFT) |
+		  (0x05 << TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_NEW_FRAME_SHIFT) |
+		  (0x03 << TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_RETRY_FRAME_SHIFT));
+
+	cec_write(cec, TEGRA_CEC_INT_MASK,
+		  TEGRA_CEC_INT_MASK_TX_REGISTER_UNDERRUN |
+		  TEGRA_CEC_INT_MASK_TX_FRAME_OR_BLOCK_NAKD |
+		  TEGRA_CEC_INT_MASK_TX_ARBITRATION_FAILED |
+		  TEGRA_CEC_INT_MASK_TX_BUS_ANOMALY_DETECTED |
+		  TEGRA_CEC_INT_MASK_TX_FRAME_TRANSMITTED |
+		  TEGRA_CEC_INT_MASK_RX_REGISTER_FULL |
+		  TEGRA_CEC_INT_MASK_RX_START_BIT_DETECTED);
+
+	cec_write(cec, TEGRA_CEC_HW_CONTROL, TEGRA_CEC_HWCTRL_TX_RX_MODE);
+	return 0;
+}
+
+static int tegra_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	struct tegra_cec *cec = adap->priv;
+	u32 state = cec_read(cec, TEGRA_CEC_HW_CONTROL);
+
+	if (logical_addr == CEC_LOG_ADDR_INVALID)
+		state &= ~TEGRA_CEC_HWCTRL_RX_LADDR_MASK;
+	else
+		state |= TEGRA_CEC_HWCTRL_RX_LADDR((1 << logical_addr));
+
+	cec_write(cec, TEGRA_CEC_HW_CONTROL, state);
+	return 0;
+}
+
+static int tegra_cec_adap_monitor_all_enable(struct cec_adapter *adap,
+					     bool enable)
+{
+	struct tegra_cec *cec = adap->priv;
+	u32 reg = cec_read(cec, TEGRA_CEC_HW_CONTROL);
+
+	if (enable)
+		reg |= TEGRA_CEC_HWCTRL_RX_SNOOP;
+	else
+		reg &= ~TEGRA_CEC_HWCTRL_RX_SNOOP;
+	cec_write(cec, TEGRA_CEC_HW_CONTROL, reg);
+	return 0;
+}
+
+static int tegra_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				   u32 signal_free_time_ms, struct cec_msg *msg)
+{
+	bool retry_xfer = signal_free_time_ms == CEC_SIGNAL_FREE_TIME_RETRY;
+	struct tegra_cec *cec = adap->priv;
+	unsigned int i;
+	u32 mode = 0;
+	u32 mask;
+
+	if (cec_msg_is_broadcast(msg))
+		mode = TEGRA_CEC_TX_REG_BCAST;
+
+	cec->tx_buf_cur = 0;
+	cec->tx_buf_cnt = msg->len;
+
+	for (i = 0; i < msg->len; i++) {
+		cec->tx_buf[i] = mode | msg->msg[i];
+		if (i == 0)
+			cec->tx_buf[i] |= TEGRA_CEC_TX_REG_START_BIT;
+		if (i == msg->len - 1)
+			cec->tx_buf[i] |= TEGRA_CEC_TX_REG_EOM;
+		if (i == 0 && retry_xfer)
+			cec->tx_buf[i] |= TEGRA_CEC_TX_REG_RETRY;
+	}
+
+	mask = cec_read(cec, TEGRA_CEC_INT_MASK);
+	cec_write(cec, TEGRA_CEC_INT_MASK,
+		  mask | TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY);
+
+	return 0;
+}
+
+static const struct cec_adap_ops tegra_cec_ops = {
+	.adap_enable = tegra_cec_adap_enable,
+	.adap_log_addr = tegra_cec_adap_log_addr,
+	.adap_transmit = tegra_cec_adap_transmit,
+	.adap_monitor_all_enable = tegra_cec_adap_monitor_all_enable,
+};
+
+static int tegra_cec_probe(struct platform_device *pdev)
+{
+	struct device *hdmi_dev;
+	struct tegra_cec *cec;
+	struct resource *res;
+	int ret = 0;
+
+	hdmi_dev = cec_notifier_parse_hdmi_phandle(&pdev->dev);
+
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	cec = devm_kzalloc(&pdev->dev, sizeof(struct tegra_cec), GFP_KERNEL);
+
+	if (!cec)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Unable to allocate resources for device\n");
+		return -EBUSY;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
+		pdev->name)) {
+		dev_err(&pdev->dev,
+			"Unable to request mem region for device\n");
+		return -EBUSY;
+	}
+
+	cec->tegra_cec_irq = platform_get_irq(pdev, 0);
+
+	if (cec->tegra_cec_irq <= 0)
+		return -EBUSY;
+
+	cec->cec_base = devm_ioremap(&pdev->dev, res->start,
+					     resource_size(res));
+
+	if (!cec->cec_base) {
+		dev_err(&pdev->dev, "Unable to grab IOs for device\n");
+		return -EBUSY;
+	}
+
+	cec->clk = devm_clk_get(&pdev->dev, "cec");
+
+	if (IS_ERR_OR_NULL(cec->clk)) {
+		dev_err(&pdev->dev, "Can't get clock for CEC\n");
+		return -ENOENT;
+	}
+
+	clk_prepare_enable(cec->clk);
+
+	/* set context info. */
+	cec->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, cec);
+
+	ret = devm_request_threaded_irq(&pdev->dev, cec->tegra_cec_irq,
+		tegra_cec_irq_handler, tegra_cec_irq_thread_handler,
+		0, "cec_irq", &pdev->dev);
+
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Unable to request interrupt for device\n");
+		goto err_clk;
+	}
+
+	cec->adap = cec_allocate_adapter(&tegra_cec_ops, cec, TEGRA_CEC_NAME,
+			CEC_CAP_DEFAULTS | CEC_CAP_MONITOR_ALL |
+			CEC_CAP_CONNECTOR_INFO,
+			CEC_MAX_LOG_ADDRS);
+	if (IS_ERR(cec->adap)) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "Couldn't create cec adapter\n");
+		goto err_clk;
+	}
+
+	cec->notifier = cec_notifier_cec_adap_register(hdmi_dev, NULL,
+						       cec->adap);
+	if (!cec->notifier) {
+		ret = -ENOMEM;
+		goto err_adapter;
+	}
+
+	ret = cec_register_adapter(cec->adap, &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't register device\n");
+		goto err_notifier;
+	}
+
+	return 0;
+
+err_notifier:
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+err_adapter:
+	cec_delete_adapter(cec->adap);
+err_clk:
+	clk_disable_unprepare(cec->clk);
+	return ret;
+}
+
+static int tegra_cec_remove(struct platform_device *pdev)
+{
+	struct tegra_cec *cec = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(cec->clk);
+
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+	cec_unregister_adapter(cec->adap);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tegra_cec_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct tegra_cec *cec = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(cec->clk);
+
+	dev_notice(&pdev->dev, "suspended\n");
+	return 0;
+}
+
+static int tegra_cec_resume(struct platform_device *pdev)
+{
+	struct tegra_cec *cec = platform_get_drvdata(pdev);
+
+	dev_notice(&pdev->dev, "Resuming\n");
+
+	clk_prepare_enable(cec->clk);
+
+	return 0;
+}
+#endif
+
+static const struct of_device_id tegra_cec_of_match[] = {
+	{ .compatible = "nvidia,tegra114-cec", },
+	{ .compatible = "nvidia,tegra124-cec", },
+	{ .compatible = "nvidia,tegra210-cec", },
+	{},
+};
+
+static struct platform_driver tegra_cec_driver = {
+	.driver = {
+		.name = TEGRA_CEC_NAME,
+		.of_match_table = of_match_ptr(tegra_cec_of_match),
+	},
+	.probe = tegra_cec_probe,
+	.remove = tegra_cec_remove,
+
+#ifdef CONFIG_PM
+	.suspend = tegra_cec_suspend,
+	.resume = tegra_cec_resume,
+#endif
+};
+
+module_platform_driver(tegra_cec_driver);
+
+MODULE_DESCRIPTION("Tegra HDMI CEC driver");
+MODULE_AUTHOR("NVIDIA CORPORATION");
+MODULE_AUTHOR("Cisco Systems, Inc. and/or its affiliates");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/cec/platform/tegra/tegra_cec.h b/drivers/media/cec/platform/tegra/tegra_cec.h
new file mode 100644
index 000000000000..8c370be38e1e
--- /dev/null
+++ b/drivers/media/cec/platform/tegra/tegra_cec.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Tegra CEC register definitions
+ *
+ * The original 3.10 CEC driver using a custom API:
+ *
+ * Copyright (c) 2012-2015, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Conversion to the CEC framework and to the mainline kernel:
+ *
+ * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef TEGRA_CEC_H
+#define TEGRA_CEC_H
+
+/* CEC registers */
+#define TEGRA_CEC_SW_CONTROL	0x000
+#define TEGRA_CEC_HW_CONTROL	0x004
+#define TEGRA_CEC_INPUT_FILTER	0x008
+#define TEGRA_CEC_TX_REGISTER	0x010
+#define TEGRA_CEC_RX_REGISTER	0x014
+#define TEGRA_CEC_RX_TIMING_0	0x018
+#define TEGRA_CEC_RX_TIMING_1	0x01c
+#define TEGRA_CEC_RX_TIMING_2	0x020
+#define TEGRA_CEC_TX_TIMING_0	0x024
+#define TEGRA_CEC_TX_TIMING_1	0x028
+#define TEGRA_CEC_TX_TIMING_2	0x02c
+#define TEGRA_CEC_INT_STAT	0x030
+#define TEGRA_CEC_INT_MASK	0x034
+#define TEGRA_CEC_HW_DEBUG_RX	0x038
+#define TEGRA_CEC_HW_DEBUG_TX	0x03c
+
+#define TEGRA_CEC_HWCTRL_RX_LADDR_MASK				0x7fff
+#define TEGRA_CEC_HWCTRL_RX_LADDR(x)	\
+	((x) & TEGRA_CEC_HWCTRL_RX_LADDR_MASK)
+#define TEGRA_CEC_HWCTRL_RX_SNOOP				BIT(15)
+#define TEGRA_CEC_HWCTRL_RX_NAK_MODE				BIT(16)
+#define TEGRA_CEC_HWCTRL_TX_NAK_MODE				BIT(24)
+#define TEGRA_CEC_HWCTRL_FAST_SIM_MODE				BIT(30)
+#define TEGRA_CEC_HWCTRL_TX_RX_MODE				BIT(31)
+
+#define TEGRA_CEC_INPUT_FILTER_MODE				BIT(31)
+#define TEGRA_CEC_INPUT_FILTER_FIFO_LENGTH_SHIFT		0
+
+#define TEGRA_CEC_TX_REG_DATA_SHIFT				0
+#define TEGRA_CEC_TX_REG_EOM					BIT(8)
+#define TEGRA_CEC_TX_REG_BCAST					BIT(12)
+#define TEGRA_CEC_TX_REG_START_BIT				BIT(16)
+#define TEGRA_CEC_TX_REG_RETRY					BIT(17)
+
+#define TEGRA_CEC_RX_REGISTER_SHIFT				0
+#define TEGRA_CEC_RX_REGISTER_EOM				BIT(8)
+#define TEGRA_CEC_RX_REGISTER_ACK				BIT(9)
+
+#define TEGRA_CEC_RX_TIM0_START_BIT_MAX_LO_TIME_SHIFT		0
+#define TEGRA_CEC_RX_TIM0_START_BIT_MIN_LO_TIME_SHIFT		8
+#define TEGRA_CEC_RX_TIM0_START_BIT_MAX_DURATION_SHIFT		16
+#define TEGRA_CEC_RX_TIM0_START_BIT_MIN_DURATION_SHIFT		24
+
+#define TEGRA_CEC_RX_TIM1_DATA_BIT_MAX_LO_TIME_SHIFT		0
+#define TEGRA_CEC_RX_TIM1_DATA_BIT_SAMPLE_TIME_SHIFT		8
+#define TEGRA_CEC_RX_TIM1_DATA_BIT_MAX_DURATION_SHIFT		16
+#define TEGRA_CEC_RX_TIM1_DATA_BIT_MIN_DURATION_SHIFT		24
+
+#define TEGRA_CEC_RX_TIM2_END_OF_BLOCK_TIME_SHIFT		0
+
+#define TEGRA_CEC_TX_TIM0_START_BIT_LO_TIME_SHIFT		0
+#define TEGRA_CEC_TX_TIM0_START_BIT_DURATION_SHIFT		8
+#define TEGRA_CEC_TX_TIM0_BUS_XITION_TIME_SHIFT			16
+#define TEGRA_CEC_TX_TIM0_BUS_ERROR_LO_TIME_SHIFT		24
+
+#define TEGRA_CEC_TX_TIM1_LO_DATA_BIT_LO_TIME_SHIFT		0
+#define TEGRA_CEC_TX_TIM1_HI_DATA_BIT_LO_TIME_SHIFT		8
+#define TEGRA_CEC_TX_TIM1_DATA_BIT_DURATION_SHIFT		16
+#define TEGRA_CEC_TX_TIM1_ACK_NAK_BIT_SAMPLE_TIME_SHIFT		24
+
+#define TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_ADDITIONAL_FRAME_SHIFT	0
+#define TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_NEW_FRAME_SHIFT		4
+#define TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_RETRY_FRAME_SHIFT	8
+
+#define TEGRA_CEC_INT_STAT_TX_REGISTER_EMPTY			BIT(0)
+#define TEGRA_CEC_INT_STAT_TX_REGISTER_UNDERRUN			BIT(1)
+#define TEGRA_CEC_INT_STAT_TX_FRAME_OR_BLOCK_NAKD		BIT(2)
+#define TEGRA_CEC_INT_STAT_TX_ARBITRATION_FAILED		BIT(3)
+#define TEGRA_CEC_INT_STAT_TX_BUS_ANOMALY_DETECTED		BIT(4)
+#define TEGRA_CEC_INT_STAT_TX_FRAME_TRANSMITTED			BIT(5)
+#define TEGRA_CEC_INT_STAT_RX_REGISTER_FULL			BIT(8)
+#define TEGRA_CEC_INT_STAT_RX_REGISTER_OVERRUN			BIT(9)
+#define TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED		BIT(10)
+#define TEGRA_CEC_INT_STAT_RX_BUS_ANOMALY_DETECTED		BIT(11)
+#define TEGRA_CEC_INT_STAT_RX_BUS_ERROR_DETECTED		BIT(12)
+#define TEGRA_CEC_INT_STAT_FILTERED_RX_DATA_PIN_TRANSITION_H2L	BIT(13)
+#define TEGRA_CEC_INT_STAT_FILTERED_RX_DATA_PIN_TRANSITION_L2H	BIT(14)
+
+#define TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY			BIT(0)
+#define TEGRA_CEC_INT_MASK_TX_REGISTER_UNDERRUN			BIT(1)
+#define TEGRA_CEC_INT_MASK_TX_FRAME_OR_BLOCK_NAKD		BIT(2)
+#define TEGRA_CEC_INT_MASK_TX_ARBITRATION_FAILED		BIT(3)
+#define TEGRA_CEC_INT_MASK_TX_BUS_ANOMALY_DETECTED		BIT(4)
+#define TEGRA_CEC_INT_MASK_TX_FRAME_TRANSMITTED			BIT(5)
+#define TEGRA_CEC_INT_MASK_RX_REGISTER_FULL			BIT(8)
+#define TEGRA_CEC_INT_MASK_RX_REGISTER_OVERRUN			BIT(9)
+#define TEGRA_CEC_INT_MASK_RX_START_BIT_DETECTED		BIT(10)
+#define TEGRA_CEC_INT_MASK_RX_BUS_ANOMALY_DETECTED		BIT(11)
+#define TEGRA_CEC_INT_MASK_RX_BUS_ERROR_DETECTED		BIT(12)
+#define TEGRA_CEC_INT_MASK_FILTERED_RX_DATA_PIN_TRANSITION_H2L	BIT(13)
+#define TEGRA_CEC_INT_MASK_FILTERED_RX_DATA_PIN_TRANSITION_L2H	BIT(14)
+
+#define TEGRA_CEC_HW_DEBUG_TX_DURATION_COUNT_SHIFT		0
+#define TEGRA_CEC_HW_DEBUG_TX_TXBIT_COUNT_SHIFT			17
+#define TEGRA_CEC_HW_DEBUG_TX_STATE_SHIFT			21
+#define TEGRA_CEC_HW_DEBUG_TX_FORCELOOUT			BIT(25)
+#define TEGRA_CEC_HW_DEBUG_TX_TXDATABIT_SAMPLE_TIMER		BIT(26)
+
+#endif /* TEGRA_CEC_H */
diff --git a/drivers/media/cec/usb/Kconfig b/drivers/media/cec/usb/Kconfig
new file mode 100644
index 000000000000..3f3a5c75287a
--- /dev/null
+++ b/drivers/media/cec/usb/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# USB drivers
+
+if USB_SUPPORT && TTY
+source "drivers/media/cec/usb/pulse8/Kconfig"
+source "drivers/media/cec/usb/rainshadow/Kconfig"
+endif
diff --git a/drivers/media/cec/usb/Makefile b/drivers/media/cec/usb/Makefile
new file mode 100644
index 000000000000..e4183d1bfa9a
--- /dev/null
+++ b/drivers/media/cec/usb/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the CEC USB device drivers.
+#
+obj-$(CONFIG_USB_PULSE8_CEC) += pulse8/
+obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow/
diff --git a/drivers/media/cec/usb/pulse8/Kconfig b/drivers/media/cec/usb/pulse8/Kconfig
new file mode 100644
index 000000000000..a0224ef80e6c
--- /dev/null
+++ b/drivers/media/cec/usb/pulse8/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config USB_PULSE8_CEC
+	tristate "Pulse Eight HDMI CEC"
+	select CEC_CORE
+	select USB
+	select USB_ACM
+	select SERIO
+	select SERIO_SERPORT
+	help
+	  This is a cec driver for the Pulse Eight HDMI CEC device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pulse8-cec.
diff --git a/drivers/media/cec/usb/pulse8/Makefile b/drivers/media/cec/usb/pulse8/Makefile
new file mode 100644
index 000000000000..7816c68bf928
--- /dev/null
+++ b/drivers/media/cec/usb/pulse8/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec.o
diff --git a/drivers/media/cec/usb/pulse8/pulse8-cec.c b/drivers/media/cec/usb/pulse8/pulse8-cec.c
new file mode 100644
index 000000000000..0655aa9ecf28
--- /dev/null
+++ b/drivers/media/cec/usb/pulse8/pulse8-cec.c
@@ -0,0 +1,909 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Pulse Eight HDMI CEC driver
+ *
+ * Copyright 2016 Hans Verkuil <hverkuil@xs4all.nl
+ */
+
+/*
+ * Notes:
+ *
+ * - Devices with firmware version < 2 do not store their configuration in
+ *   EEPROM.
+ *
+ * - In autonomous mode, only messages from a TV will be acknowledged, even
+ *   polling messages. Upon receiving a message from a TV, the dongle will
+ *   respond to messages from any logical address.
+ *
+ * - In autonomous mode, the dongle will by default reply Feature Abort
+ *   [Unrecognized Opcode] when it receives Give Device Vendor ID. It will
+ *   however observe vendor ID's reported by other devices and possibly
+ *   alter this behavior. When TV's (and TV's only) report that their vendor ID
+ *   is LG (0x00e091), the dongle will itself reply that it has the same vendor
+ *   ID, and it will respond to at least one vendor specific command.
+ *
+ * - In autonomous mode, the dongle is known to attempt wakeup if it receives
+ *   <User Control Pressed> ["Power On"], ["Power] or ["Power Toggle"], or if it
+ *   receives <Set Stream Path> with its own physical address. It also does this
+ *   if it receives <Vendor Specific Command> [0x03 0x00] from an LG TV.
+ */
+
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+
+#include <media/cec.h>
+
+MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>");
+MODULE_DESCRIPTION("Pulse Eight HDMI CEC driver");
+MODULE_LICENSE("GPL");
+
+static int debug;
+static int persistent_config;
+module_param(debug, int, 0644);
+module_param(persistent_config, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+MODULE_PARM_DESC(persistent_config, "read config from persistent memory (0-1)");
+
+enum pulse8_msgcodes {
+	MSGCODE_NOTHING = 0,
+	MSGCODE_PING,
+	MSGCODE_TIMEOUT_ERROR,
+	MSGCODE_HIGH_ERROR,
+	MSGCODE_LOW_ERROR,
+	MSGCODE_FRAME_START,
+	MSGCODE_FRAME_DATA,
+	MSGCODE_RECEIVE_FAILED,
+	MSGCODE_COMMAND_ACCEPTED,	/* 0x08 */
+	MSGCODE_COMMAND_REJECTED,
+	MSGCODE_SET_ACK_MASK,
+	MSGCODE_TRANSMIT,
+	MSGCODE_TRANSMIT_EOM,
+	MSGCODE_TRANSMIT_IDLETIME,
+	MSGCODE_TRANSMIT_ACK_POLARITY,
+	MSGCODE_TRANSMIT_LINE_TIMEOUT,
+	MSGCODE_TRANSMIT_SUCCEEDED,	/* 0x10 */
+	MSGCODE_TRANSMIT_FAILED_LINE,
+	MSGCODE_TRANSMIT_FAILED_ACK,
+	MSGCODE_TRANSMIT_FAILED_TIMEOUT_DATA,
+	MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE,
+	MSGCODE_FIRMWARE_VERSION,
+	MSGCODE_START_BOOTLOADER,
+	MSGCODE_GET_BUILDDATE,
+	MSGCODE_SET_CONTROLLED,		/* 0x18 */
+	MSGCODE_GET_AUTO_ENABLED,
+	MSGCODE_SET_AUTO_ENABLED,
+	MSGCODE_GET_DEFAULT_LOGICAL_ADDRESS,
+	MSGCODE_SET_DEFAULT_LOGICAL_ADDRESS,
+	MSGCODE_GET_LOGICAL_ADDRESS_MASK,
+	MSGCODE_SET_LOGICAL_ADDRESS_MASK,
+	MSGCODE_GET_PHYSICAL_ADDRESS,
+	MSGCODE_SET_PHYSICAL_ADDRESS,	/* 0x20 */
+	MSGCODE_GET_DEVICE_TYPE,
+	MSGCODE_SET_DEVICE_TYPE,
+	MSGCODE_GET_HDMI_VERSION,
+	MSGCODE_SET_HDMI_VERSION,
+	MSGCODE_GET_OSD_NAME,
+	MSGCODE_SET_OSD_NAME,
+	MSGCODE_WRITE_EEPROM,
+	MSGCODE_GET_ADAPTER_TYPE,	/* 0x28 */
+	MSGCODE_SET_ACTIVE_SOURCE,
+
+	MSGCODE_FRAME_EOM = 0x80,
+	MSGCODE_FRAME_ACK = 0x40,
+};
+
+static const char * const pulse8_msgnames[] = {
+	"NOTHING",
+	"PING",
+	"TIMEOUT_ERROR",
+	"HIGH_ERROR",
+	"LOW_ERROR",
+	"FRAME_START",
+	"FRAME_DATA",
+	"RECEIVE_FAILED",
+	"COMMAND_ACCEPTED",
+	"COMMAND_REJECTED",
+	"SET_ACK_MASK",
+	"TRANSMIT",
+	"TRANSMIT_EOM",
+	"TRANSMIT_IDLETIME",
+	"TRANSMIT_ACK_POLARITY",
+	"TRANSMIT_LINE_TIMEOUT",
+	"TRANSMIT_SUCCEEDED",
+	"TRANSMIT_FAILED_LINE",
+	"TRANSMIT_FAILED_ACK",
+	"TRANSMIT_FAILED_TIMEOUT_DATA",
+	"TRANSMIT_FAILED_TIMEOUT_LINE",
+	"FIRMWARE_VERSION",
+	"START_BOOTLOADER",
+	"GET_BUILDDATE",
+	"SET_CONTROLLED",
+	"GET_AUTO_ENABLED",
+	"SET_AUTO_ENABLED",
+	"GET_DEFAULT_LOGICAL_ADDRESS",
+	"SET_DEFAULT_LOGICAL_ADDRESS",
+	"GET_LOGICAL_ADDRESS_MASK",
+	"SET_LOGICAL_ADDRESS_MASK",
+	"GET_PHYSICAL_ADDRESS",
+	"SET_PHYSICAL_ADDRESS",
+	"GET_DEVICE_TYPE",
+	"SET_DEVICE_TYPE",
+	"GET_HDMI_VERSION",
+	"SET_HDMI_VERSION",
+	"GET_OSD_NAME",
+	"SET_OSD_NAME",
+	"WRITE_EEPROM",
+	"GET_ADAPTER_TYPE",
+	"SET_ACTIVE_SOURCE",
+};
+
+static const char *pulse8_msgname(u8 cmd)
+{
+	static char unknown_msg[5];
+
+	if ((cmd & 0x3f) < ARRAY_SIZE(pulse8_msgnames))
+		return pulse8_msgnames[cmd & 0x3f];
+	snprintf(unknown_msg, sizeof(unknown_msg), "0x%02x", cmd);
+	return unknown_msg;
+}
+
+#define MSGSTART	0xff
+#define MSGEND		0xfe
+#define MSGESC		0xfd
+#define MSGOFFSET	3
+
+#define DATA_SIZE 256
+
+#define PING_PERIOD	(15 * HZ)
+
+#define NUM_MSGS 8
+
+struct pulse8 {
+	struct device *dev;
+	struct serio *serio;
+	struct cec_adapter *adap;
+	unsigned int vers;
+
+	struct delayed_work ping_eeprom_work;
+
+	struct work_struct irq_work;
+	struct cec_msg rx_msg[NUM_MSGS];
+	unsigned int rx_msg_cur_idx, rx_msg_num;
+	/* protect rx_msg_cur_idx and rx_msg_num */
+	spinlock_t msg_lock;
+	u8 new_rx_msg[CEC_MAX_MSG_SIZE];
+	u8 new_rx_msg_len;
+
+	struct work_struct tx_work;
+	u32 tx_done_status;
+	u32 tx_signal_free_time;
+	struct cec_msg tx_msg;
+	bool tx_msg_is_bcast;
+
+	struct completion cmd_done;
+	u8 data[DATA_SIZE];
+	unsigned int len;
+	u8 buf[DATA_SIZE];
+	unsigned int idx;
+	bool escape;
+	bool started;
+
+	/* locks access to the adapter */
+	struct mutex lock;
+	bool config_pending;
+	bool restoring_config;
+	bool autonomous;
+};
+
+static int pulse8_send(struct serio *serio, const u8 *command, u8 cmd_len)
+{
+	int err = 0;
+
+	err = serio_write(serio, MSGSTART);
+	if (err)
+		return err;
+	for (; !err && cmd_len; command++, cmd_len--) {
+		if (*command >= MSGESC) {
+			err = serio_write(serio, MSGESC);
+			if (!err)
+				err = serio_write(serio, *command - MSGOFFSET);
+		} else {
+			err = serio_write(serio, *command);
+		}
+	}
+	if (!err)
+		err = serio_write(serio, MSGEND);
+
+	return err;
+}
+
+static int pulse8_send_and_wait_once(struct pulse8 *pulse8,
+				     const u8 *cmd, u8 cmd_len,
+				     u8 response, u8 size)
+{
+	int err;
+
+	if (debug > 1)
+		dev_info(pulse8->dev, "transmit %s: %*ph\n",
+			 pulse8_msgname(cmd[0]), cmd_len, cmd);
+	init_completion(&pulse8->cmd_done);
+
+	err = pulse8_send(pulse8->serio, cmd, cmd_len);
+	if (err)
+		return err;
+
+	if (!wait_for_completion_timeout(&pulse8->cmd_done, HZ))
+		return -ETIMEDOUT;
+	if ((pulse8->data[0] & 0x3f) == MSGCODE_COMMAND_REJECTED &&
+	    cmd[0] != MSGCODE_SET_CONTROLLED &&
+	    cmd[0] != MSGCODE_SET_AUTO_ENABLED &&
+	    cmd[0] != MSGCODE_GET_BUILDDATE)
+		return -ENOTTY;
+	if (response &&
+	    ((pulse8->data[0] & 0x3f) != response || pulse8->len < size + 1)) {
+		dev_info(pulse8->dev, "transmit %s failed with %s\n",
+			 pulse8_msgname(cmd[0]),
+			 pulse8_msgname(pulse8->data[0]));
+		return -EIO;
+	}
+	return 0;
+}
+
+static int pulse8_send_and_wait(struct pulse8 *pulse8,
+				const u8 *cmd, u8 cmd_len, u8 response, u8 size)
+{
+	u8 cmd_sc[2];
+	int err;
+
+	err = pulse8_send_and_wait_once(pulse8, cmd, cmd_len, response, size);
+	if (err != -ENOTTY)
+		return err;
+
+	cmd_sc[0] = MSGCODE_SET_CONTROLLED;
+	cmd_sc[1] = 1;
+	err = pulse8_send_and_wait_once(pulse8, cmd_sc, 2,
+					MSGCODE_COMMAND_ACCEPTED, 1);
+	if (!err)
+		err = pulse8_send_and_wait_once(pulse8, cmd, cmd_len,
+						response, size);
+	return err == -ENOTTY ? -EIO : err;
+}
+
+static void pulse8_tx_work_handler(struct work_struct *work)
+{
+	struct pulse8 *pulse8 = container_of(work, struct pulse8, tx_work);
+	struct cec_msg *msg = &pulse8->tx_msg;
+	unsigned int i;
+	u8 cmd[2];
+	int err;
+
+	if (msg->len == 0)
+		return;
+
+	mutex_lock(&pulse8->lock);
+	cmd[0] = MSGCODE_TRANSMIT_IDLETIME;
+	cmd[1] = pulse8->tx_signal_free_time;
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 1);
+	cmd[0] = MSGCODE_TRANSMIT_ACK_POLARITY;
+	cmd[1] = cec_msg_is_broadcast(msg);
+	pulse8->tx_msg_is_bcast = cec_msg_is_broadcast(msg);
+	if (!err)
+		err = pulse8_send_and_wait(pulse8, cmd, 2,
+					   MSGCODE_COMMAND_ACCEPTED, 1);
+	cmd[0] = msg->len == 1 ? MSGCODE_TRANSMIT_EOM : MSGCODE_TRANSMIT;
+	cmd[1] = msg->msg[0];
+	if (!err)
+		err = pulse8_send_and_wait(pulse8, cmd, 2,
+					   MSGCODE_COMMAND_ACCEPTED, 1);
+	if (!err && msg->len > 1) {
+		for (i = 1; !err && i < msg->len; i++) {
+			cmd[0] = ((i == msg->len - 1)) ?
+				MSGCODE_TRANSMIT_EOM : MSGCODE_TRANSMIT;
+			cmd[1] = msg->msg[i];
+			err = pulse8_send_and_wait(pulse8, cmd, 2,
+						   MSGCODE_COMMAND_ACCEPTED, 1);
+		}
+	}
+	if (err && debug)
+		dev_info(pulse8->dev, "%s(0x%02x) failed with error %d for msg %*ph\n",
+			 pulse8_msgname(cmd[0]), cmd[1],
+			 err, msg->len, msg->msg);
+	msg->len = 0;
+	mutex_unlock(&pulse8->lock);
+	if (err)
+		cec_transmit_attempt_done(pulse8->adap, CEC_TX_STATUS_ERROR);
+}
+
+static void pulse8_irq_work_handler(struct work_struct *work)
+{
+	struct pulse8 *pulse8 =
+		container_of(work, struct pulse8, irq_work);
+	unsigned long flags;
+	u32 status;
+
+	spin_lock_irqsave(&pulse8->msg_lock, flags);
+	while (pulse8->rx_msg_num) {
+		spin_unlock_irqrestore(&pulse8->msg_lock, flags);
+		if (debug)
+			dev_info(pulse8->dev, "adap received %*ph\n",
+				 pulse8->rx_msg[pulse8->rx_msg_cur_idx].len,
+				 pulse8->rx_msg[pulse8->rx_msg_cur_idx].msg);
+		cec_received_msg(pulse8->adap,
+				 &pulse8->rx_msg[pulse8->rx_msg_cur_idx]);
+		spin_lock_irqsave(&pulse8->msg_lock, flags);
+		if (pulse8->rx_msg_num)
+			pulse8->rx_msg_num--;
+		pulse8->rx_msg_cur_idx =
+			(pulse8->rx_msg_cur_idx + 1) % NUM_MSGS;
+	}
+	spin_unlock_irqrestore(&pulse8->msg_lock, flags);
+
+	mutex_lock(&pulse8->lock);
+	status = pulse8->tx_done_status;
+	pulse8->tx_done_status = 0;
+	mutex_unlock(&pulse8->lock);
+	if (status)
+		cec_transmit_attempt_done(pulse8->adap, status);
+}
+
+static irqreturn_t pulse8_interrupt(struct serio *serio, unsigned char data,
+				    unsigned int flags)
+{
+	struct pulse8 *pulse8 = serio_get_drvdata(serio);
+	unsigned long irq_flags;
+	unsigned int idx;
+
+	if (!pulse8->started && data != MSGSTART)
+		return IRQ_HANDLED;
+	if (data == MSGESC) {
+		pulse8->escape = true;
+		return IRQ_HANDLED;
+	}
+	if (pulse8->escape) {
+		data += MSGOFFSET;
+		pulse8->escape = false;
+	} else if (data == MSGEND) {
+		u8 msgcode = pulse8->buf[0];
+
+		if (debug > 1)
+			dev_info(pulse8->dev, "received %s: %*ph\n",
+				 pulse8_msgname(msgcode),
+				 pulse8->idx, pulse8->buf);
+		switch (msgcode & 0x3f) {
+		case MSGCODE_FRAME_START:
+			/*
+			 * Test if we are receiving a new msg when a previous
+			 * message is still pending.
+			 */
+			if (!(msgcode & MSGCODE_FRAME_EOM)) {
+				pulse8->new_rx_msg_len = 1;
+				pulse8->new_rx_msg[0] = pulse8->buf[1];
+				break;
+			}
+			/* fall through */
+		case MSGCODE_FRAME_DATA:
+			if (pulse8->new_rx_msg_len < CEC_MAX_MSG_SIZE)
+				pulse8->new_rx_msg[pulse8->new_rx_msg_len++] =
+					pulse8->buf[1];
+			if (!(msgcode & MSGCODE_FRAME_EOM))
+				break;
+
+			spin_lock_irqsave(&pulse8->msg_lock, irq_flags);
+			idx = (pulse8->rx_msg_cur_idx + pulse8->rx_msg_num) %
+				NUM_MSGS;
+			if (pulse8->rx_msg_num == NUM_MSGS) {
+				dev_warn(pulse8->dev,
+					 "message queue is full, dropping %*ph\n",
+					 pulse8->new_rx_msg_len,
+					 pulse8->new_rx_msg);
+				spin_unlock_irqrestore(&pulse8->msg_lock,
+						       irq_flags);
+				pulse8->new_rx_msg_len = 0;
+				break;
+			}
+			pulse8->rx_msg_num++;
+			memcpy(pulse8->rx_msg[idx].msg, pulse8->new_rx_msg,
+			       pulse8->new_rx_msg_len);
+			pulse8->rx_msg[idx].len = pulse8->new_rx_msg_len;
+			spin_unlock_irqrestore(&pulse8->msg_lock, irq_flags);
+			schedule_work(&pulse8->irq_work);
+			pulse8->new_rx_msg_len = 0;
+			break;
+		case MSGCODE_TRANSMIT_SUCCEEDED:
+			WARN_ON(pulse8->tx_done_status);
+			pulse8->tx_done_status = CEC_TX_STATUS_OK;
+			schedule_work(&pulse8->irq_work);
+			break;
+		case MSGCODE_TRANSMIT_FAILED_ACK:
+			/*
+			 * A NACK for a broadcast message makes no sense, these
+			 * seem to be spurious messages and are skipped.
+			 */
+			if (pulse8->tx_msg_is_bcast)
+				break;
+			WARN_ON(pulse8->tx_done_status);
+			pulse8->tx_done_status = CEC_TX_STATUS_NACK;
+			schedule_work(&pulse8->irq_work);
+			break;
+		case MSGCODE_TRANSMIT_FAILED_LINE:
+		case MSGCODE_TRANSMIT_FAILED_TIMEOUT_DATA:
+		case MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE:
+			WARN_ON(pulse8->tx_done_status);
+			pulse8->tx_done_status = CEC_TX_STATUS_ERROR;
+			schedule_work(&pulse8->irq_work);
+			break;
+		case MSGCODE_HIGH_ERROR:
+		case MSGCODE_LOW_ERROR:
+		case MSGCODE_RECEIVE_FAILED:
+		case MSGCODE_TIMEOUT_ERROR:
+			pulse8->new_rx_msg_len = 0;
+			break;
+		case MSGCODE_COMMAND_ACCEPTED:
+		case MSGCODE_COMMAND_REJECTED:
+		default:
+			if (pulse8->idx == 0)
+				break;
+			memcpy(pulse8->data, pulse8->buf, pulse8->idx);
+			pulse8->len = pulse8->idx;
+			complete(&pulse8->cmd_done);
+			break;
+		}
+		pulse8->idx = 0;
+		pulse8->started = false;
+		return IRQ_HANDLED;
+	} else if (data == MSGSTART) {
+		pulse8->idx = 0;
+		pulse8->started = true;
+		return IRQ_HANDLED;
+	}
+
+	if (pulse8->idx >= DATA_SIZE) {
+		dev_dbg(pulse8->dev,
+			"throwing away %d bytes of garbage\n", pulse8->idx);
+		pulse8->idx = 0;
+	}
+	pulse8->buf[pulse8->idx++] = data;
+	return IRQ_HANDLED;
+}
+
+static int pulse8_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct pulse8 *pulse8 = cec_get_drvdata(adap);
+	u8 cmd[16];
+	int err;
+
+	mutex_lock(&pulse8->lock);
+	cmd[0] = MSGCODE_SET_CONTROLLED;
+	cmd[1] = enable;
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 1);
+	if (!enable) {
+		pulse8->rx_msg_num = 0;
+		pulse8->tx_done_status = 0;
+	}
+	mutex_unlock(&pulse8->lock);
+	return enable ? err : 0;
+}
+
+static int pulse8_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+	struct pulse8 *pulse8 = cec_get_drvdata(adap);
+	u16 mask = 0;
+	u16 pa = adap->phys_addr;
+	u8 cmd[16];
+	int err = 0;
+
+	mutex_lock(&pulse8->lock);
+	if (log_addr != CEC_LOG_ADDR_INVALID)
+		mask = 1 << log_addr;
+	cmd[0] = MSGCODE_SET_ACK_MASK;
+	cmd[1] = mask >> 8;
+	cmd[2] = mask & 0xff;
+	err = pulse8_send_and_wait(pulse8, cmd, 3,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if ((err && mask != 0) || pulse8->restoring_config)
+		goto unlock;
+
+	cmd[0] = MSGCODE_SET_AUTO_ENABLED;
+	cmd[1] = log_addr == CEC_LOG_ADDR_INVALID ? 0 : 1;
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+	pulse8->autonomous = cmd[1];
+	if (log_addr == CEC_LOG_ADDR_INVALID)
+		goto unlock;
+
+	cmd[0] = MSGCODE_SET_DEVICE_TYPE;
+	cmd[1] = adap->log_addrs.primary_device_type[0];
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+
+	switch (adap->log_addrs.primary_device_type[0]) {
+	case CEC_OP_PRIM_DEVTYPE_TV:
+		mask = CEC_LOG_ADDR_MASK_TV;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_RECORD:
+		mask = CEC_LOG_ADDR_MASK_RECORD;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_TUNER:
+		mask = CEC_LOG_ADDR_MASK_TUNER;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_PLAYBACK:
+		mask = CEC_LOG_ADDR_MASK_PLAYBACK;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM:
+		mask = CEC_LOG_ADDR_MASK_AUDIOSYSTEM;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_SWITCH:
+		mask = CEC_LOG_ADDR_MASK_UNREGISTERED;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_PROCESSOR:
+		mask = CEC_LOG_ADDR_MASK_SPECIFIC;
+		break;
+	default:
+		mask = 0;
+		break;
+	}
+	cmd[0] = MSGCODE_SET_LOGICAL_ADDRESS_MASK;
+	cmd[1] = mask >> 8;
+	cmd[2] = mask & 0xff;
+	err = pulse8_send_and_wait(pulse8, cmd, 3,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+
+	cmd[0] = MSGCODE_SET_DEFAULT_LOGICAL_ADDRESS;
+	cmd[1] = log_addr;
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+
+	cmd[0] = MSGCODE_SET_PHYSICAL_ADDRESS;
+	cmd[1] = pa >> 8;
+	cmd[2] = pa & 0xff;
+	err = pulse8_send_and_wait(pulse8, cmd, 3,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+
+	cmd[0] = MSGCODE_SET_HDMI_VERSION;
+	cmd[1] = adap->log_addrs.cec_version;
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+
+	if (adap->log_addrs.osd_name[0]) {
+		size_t osd_len = strlen(adap->log_addrs.osd_name);
+		char *osd_str = cmd + 1;
+
+		cmd[0] = MSGCODE_SET_OSD_NAME;
+		strscpy(cmd + 1, adap->log_addrs.osd_name, sizeof(cmd) - 1);
+		if (osd_len < 4) {
+			memset(osd_str + osd_len, ' ', 4 - osd_len);
+			osd_len = 4;
+			osd_str[osd_len] = '\0';
+			strscpy(adap->log_addrs.osd_name, osd_str,
+				sizeof(adap->log_addrs.osd_name));
+		}
+		err = pulse8_send_and_wait(pulse8, cmd, 1 + osd_len,
+					   MSGCODE_COMMAND_ACCEPTED, 0);
+		if (err)
+			goto unlock;
+	}
+
+unlock:
+	if (pulse8->restoring_config)
+		pulse8->restoring_config = false;
+	else
+		pulse8->config_pending = true;
+	mutex_unlock(&pulse8->lock);
+	return log_addr == CEC_LOG_ADDR_INVALID ? 0 : err;
+}
+
+static int pulse8_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				    u32 signal_free_time, struct cec_msg *msg)
+{
+	struct pulse8 *pulse8 = cec_get_drvdata(adap);
+
+	pulse8->tx_msg = *msg;
+	if (debug)
+		dev_info(pulse8->dev, "adap transmit %*ph\n",
+			 msg->len, msg->msg);
+	pulse8->tx_signal_free_time = signal_free_time;
+	schedule_work(&pulse8->tx_work);
+	return 0;
+}
+
+static void pulse8_cec_adap_free(struct cec_adapter *adap)
+{
+	struct pulse8 *pulse8 = cec_get_drvdata(adap);
+
+	cancel_delayed_work_sync(&pulse8->ping_eeprom_work);
+	cancel_work_sync(&pulse8->irq_work);
+	cancel_work_sync(&pulse8->tx_work);
+	kfree(pulse8);
+}
+
+static const struct cec_adap_ops pulse8_cec_adap_ops = {
+	.adap_enable = pulse8_cec_adap_enable,
+	.adap_log_addr = pulse8_cec_adap_log_addr,
+	.adap_transmit = pulse8_cec_adap_transmit,
+	.adap_free = pulse8_cec_adap_free,
+};
+
+static void pulse8_disconnect(struct serio *serio)
+{
+	struct pulse8 *pulse8 = serio_get_drvdata(serio);
+
+	cec_unregister_adapter(pulse8->adap);
+	pulse8->serio = NULL;
+	serio_set_drvdata(serio, NULL);
+	serio_close(serio);
+}
+
+static int pulse8_setup(struct pulse8 *pulse8, struct serio *serio,
+			struct cec_log_addrs *log_addrs, u16 *pa)
+{
+	u8 *data = pulse8->data + 1;
+	u8 cmd[2];
+	int err;
+	struct tm tm;
+	time64_t date;
+
+	pulse8->vers = 0;
+
+	cmd[0] = MSGCODE_FIRMWARE_VERSION;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 2);
+	if (err)
+		return err;
+	pulse8->vers = (data[0] << 8) | data[1];
+	dev_info(pulse8->dev, "Firmware version %04x\n", pulse8->vers);
+	if (pulse8->vers < 2) {
+		*pa = CEC_PHYS_ADDR_INVALID;
+		return 0;
+	}
+
+	cmd[0] = MSGCODE_GET_BUILDDATE;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 4);
+	if (err)
+		return err;
+	date = (data[0] << 24) | (data[1] << 16) | (data[2] << 8) | data[3];
+	time64_to_tm(date, 0, &tm);
+	dev_info(pulse8->dev, "Firmware build date %04ld.%02d.%02d %02d:%02d:%02d\n",
+		 tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+		 tm.tm_hour, tm.tm_min, tm.tm_sec);
+
+	dev_dbg(pulse8->dev, "Persistent config:\n");
+	cmd[0] = MSGCODE_GET_AUTO_ENABLED;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+	if (err)
+		return err;
+	pulse8->autonomous = data[0];
+	dev_dbg(pulse8->dev, "Autonomous mode: %s",
+		data[0] ? "on" : "off");
+
+	cmd[0] = MSGCODE_GET_DEVICE_TYPE;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+	if (err)
+		return err;
+	log_addrs->primary_device_type[0] = data[0];
+	dev_dbg(pulse8->dev, "Primary device type: %d\n", data[0]);
+	switch (log_addrs->primary_device_type[0]) {
+	case CEC_OP_PRIM_DEVTYPE_TV:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_TV;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_TV;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_RECORD:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_RECORD;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_RECORD;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_TUNER:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_TUNER;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_TUNER;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_PLAYBACK:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_PLAYBACK;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_PLAYBACK;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_PLAYBACK;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_SWITCH:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_PROCESSOR:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_SPECIFIC;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
+		break;
+	default:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
+		dev_info(pulse8->dev, "Unknown Primary Device Type: %d\n",
+			 log_addrs->primary_device_type[0]);
+		break;
+	}
+
+	cmd[0] = MSGCODE_GET_LOGICAL_ADDRESS_MASK;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 2);
+	if (err)
+		return err;
+	log_addrs->log_addr_mask = (data[0] << 8) | data[1];
+	dev_dbg(pulse8->dev, "Logical address ACK mask: %x\n",
+		log_addrs->log_addr_mask);
+	if (log_addrs->log_addr_mask)
+		log_addrs->num_log_addrs = 1;
+
+	cmd[0] = MSGCODE_GET_PHYSICAL_ADDRESS;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+	if (err)
+		return err;
+	*pa = (data[0] << 8) | data[1];
+	dev_dbg(pulse8->dev, "Physical address: %x.%x.%x.%x\n",
+		cec_phys_addr_exp(*pa));
+
+	cmd[0] = MSGCODE_GET_HDMI_VERSION;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+	if (err)
+		return err;
+	log_addrs->cec_version = data[0];
+	dev_dbg(pulse8->dev, "CEC version: %d\n", log_addrs->cec_version);
+
+	cmd[0] = MSGCODE_GET_OSD_NAME;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 0);
+	if (err)
+		return err;
+	strscpy(log_addrs->osd_name, data, sizeof(log_addrs->osd_name));
+	dev_dbg(pulse8->dev, "OSD name: %s\n", log_addrs->osd_name);
+
+	return 0;
+}
+
+static int pulse8_apply_persistent_config(struct pulse8 *pulse8,
+					  struct cec_log_addrs *log_addrs,
+					  u16 pa)
+{
+	int err;
+
+	err = cec_s_log_addrs(pulse8->adap, log_addrs, false);
+	if (err)
+		return err;
+
+	cec_s_phys_addr(pulse8->adap, pa, false);
+
+	return 0;
+}
+
+static void pulse8_ping_eeprom_work_handler(struct work_struct *work)
+{
+	struct pulse8 *pulse8 =
+		container_of(work, struct pulse8, ping_eeprom_work.work);
+	u8 cmd;
+
+	mutex_lock(&pulse8->lock);
+	cmd = MSGCODE_PING;
+	pulse8_send_and_wait(pulse8, &cmd, 1,
+			     MSGCODE_COMMAND_ACCEPTED, 0);
+
+	if (pulse8->vers < 2)
+		goto unlock;
+
+	if (pulse8->config_pending && persistent_config) {
+		dev_dbg(pulse8->dev, "writing pending config to EEPROM\n");
+		cmd = MSGCODE_WRITE_EEPROM;
+		if (pulse8_send_and_wait(pulse8, &cmd, 1,
+					 MSGCODE_COMMAND_ACCEPTED, 0))
+			dev_info(pulse8->dev, "failed to write pending config to EEPROM\n");
+		else
+			pulse8->config_pending = false;
+	}
+unlock:
+	schedule_delayed_work(&pulse8->ping_eeprom_work, PING_PERIOD);
+	mutex_unlock(&pulse8->lock);
+}
+
+static int pulse8_connect(struct serio *serio, struct serio_driver *drv)
+{
+	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_PHYS_ADDR | CEC_CAP_MONITOR_ALL;
+	struct pulse8 *pulse8;
+	int err = -ENOMEM;
+	struct cec_log_addrs log_addrs = {};
+	u16 pa = CEC_PHYS_ADDR_INVALID;
+
+	pulse8 = kzalloc(sizeof(*pulse8), GFP_KERNEL);
+
+	if (!pulse8)
+		return -ENOMEM;
+
+	pulse8->serio = serio;
+	pulse8->adap = cec_allocate_adapter(&pulse8_cec_adap_ops, pulse8,
+					    dev_name(&serio->dev), caps, 1);
+	err = PTR_ERR_OR_ZERO(pulse8->adap);
+	if (err < 0)
+		goto free_device;
+
+	pulse8->dev = &serio->dev;
+	serio_set_drvdata(serio, pulse8);
+	INIT_WORK(&pulse8->irq_work, pulse8_irq_work_handler);
+	INIT_WORK(&pulse8->tx_work, pulse8_tx_work_handler);
+	INIT_DELAYED_WORK(&pulse8->ping_eeprom_work,
+			  pulse8_ping_eeprom_work_handler);
+	mutex_init(&pulse8->lock);
+	spin_lock_init(&pulse8->msg_lock);
+	pulse8->config_pending = false;
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto delete_adap;
+
+	err = pulse8_setup(pulse8, serio, &log_addrs, &pa);
+	if (err)
+		goto close_serio;
+
+	err = cec_register_adapter(pulse8->adap, &serio->dev);
+	if (err < 0)
+		goto close_serio;
+
+	pulse8->dev = &pulse8->adap->devnode.dev;
+
+	if (persistent_config && pulse8->autonomous) {
+		err = pulse8_apply_persistent_config(pulse8, &log_addrs, pa);
+		if (err)
+			goto close_serio;
+		pulse8->restoring_config = true;
+	}
+
+	schedule_delayed_work(&pulse8->ping_eeprom_work, PING_PERIOD);
+
+	return 0;
+
+close_serio:
+	pulse8->serio = NULL;
+	serio_set_drvdata(serio, NULL);
+	serio_close(serio);
+delete_adap:
+	cec_delete_adapter(pulse8->adap);
+free_device:
+	kfree(pulse8);
+	return err;
+}
+
+static const struct serio_device_id pulse8_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_PULSE8_CEC,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, pulse8_serio_ids);
+
+static struct serio_driver pulse8_drv = {
+	.driver		= {
+		.name	= "pulse8-cec",
+	},
+	.description	= "Pulse Eight HDMI CEC driver",
+	.id_table	= pulse8_serio_ids,
+	.interrupt	= pulse8_interrupt,
+	.connect	= pulse8_connect,
+	.disconnect	= pulse8_disconnect,
+};
+
+module_serio_driver(pulse8_drv);
diff --git a/drivers/media/cec/usb/rainshadow/Kconfig b/drivers/media/cec/usb/rainshadow/Kconfig
new file mode 100644
index 000000000000..c9ef2c192b17
--- /dev/null
+++ b/drivers/media/cec/usb/rainshadow/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config USB_RAINSHADOW_CEC
+	tristate "RainShadow Tech HDMI CEC"
+	select CEC_CORE
+	select USB
+	select USB_ACM
+	select SERIO
+	select SERIO_SERPORT
+	help
+	  This is a cec driver for the RainShadow Tech HDMI CEC device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rainshadow-cec.
diff --git a/drivers/media/cec/usb/rainshadow/Makefile b/drivers/media/cec/usb/rainshadow/Makefile
new file mode 100644
index 000000000000..47b33c574c3e
--- /dev/null
+++ b/drivers/media/cec/usb/rainshadow/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec.o
diff --git a/drivers/media/cec/usb/rainshadow/rainshadow-cec.c b/drivers/media/cec/usb/rainshadow/rainshadow-cec.c
new file mode 100644
index 000000000000..ee870ea1a886
--- /dev/null
+++ b/drivers/media/cec/usb/rainshadow/rainshadow-cec.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RainShadow Tech HDMI CEC driver
+ *
+ * Copyright 2016 Hans Verkuil <hverkuil@xs4all.nl
+ */
+
+/*
+ * Notes:
+ *
+ * The higher level protocols are currently disabled. This can be added
+ * later, similar to how this is done for the Pulse Eight CEC driver.
+ *
+ * Documentation of the protocol is available here:
+ *
+ * http://rainshadowtech.com/doc/HDMICECtoUSBandRS232v2.0.pdf
+ */
+
+#include <linux/completion.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+#include <linux/workqueue.h>
+
+#include <media/cec.h>
+
+MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>");
+MODULE_DESCRIPTION("RainShadow Tech HDMI CEC driver");
+MODULE_LICENSE("GPL");
+
+#define DATA_SIZE 256
+
+struct rain {
+	struct device *dev;
+	struct serio *serio;
+	struct cec_adapter *adap;
+	struct completion cmd_done;
+	struct work_struct work;
+
+	/* Low-level ringbuffer, collecting incoming characters */
+	char buf[DATA_SIZE];
+	unsigned int buf_rd_idx;
+	unsigned int buf_wr_idx;
+	unsigned int buf_len;
+	spinlock_t buf_lock;
+
+	/* command buffer */
+	char cmd[DATA_SIZE];
+	unsigned int cmd_idx;
+	bool cmd_started;
+
+	/* reply to a command, only used to store the firmware version */
+	char cmd_reply[DATA_SIZE];
+
+	struct mutex write_lock;
+};
+
+static void rain_process_msg(struct rain *rain)
+{
+	struct cec_msg msg = {};
+	const char *cmd = rain->cmd + 3;
+	int stat = -1;
+
+	for (; *cmd; cmd++) {
+		if (!isxdigit(*cmd))
+			continue;
+		if (isxdigit(cmd[0]) && isxdigit(cmd[1])) {
+			if (msg.len == CEC_MAX_MSG_SIZE)
+				break;
+			if (hex2bin(msg.msg + msg.len, cmd, 1))
+				continue;
+			msg.len++;
+			cmd++;
+			continue;
+		}
+		if (!cmd[1])
+			stat = hex_to_bin(cmd[0]);
+		break;
+	}
+
+	if (rain->cmd[0] == 'R') {
+		if (stat == 1 || stat == 2)
+			cec_received_msg(rain->adap, &msg);
+		return;
+	}
+
+	switch (stat) {
+	case 1:
+		cec_transmit_attempt_done(rain->adap, CEC_TX_STATUS_OK);
+		break;
+	case 2:
+		cec_transmit_attempt_done(rain->adap, CEC_TX_STATUS_NACK);
+		break;
+	default:
+		cec_transmit_attempt_done(rain->adap, CEC_TX_STATUS_LOW_DRIVE);
+		break;
+	}
+}
+
+static void rain_irq_work_handler(struct work_struct *work)
+{
+	struct rain *rain =
+		container_of(work, struct rain, work);
+
+	while (true) {
+		unsigned long flags;
+		char data;
+
+		spin_lock_irqsave(&rain->buf_lock, flags);
+		if (!rain->buf_len) {
+			spin_unlock_irqrestore(&rain->buf_lock, flags);
+			break;
+		}
+
+		data = rain->buf[rain->buf_rd_idx];
+		rain->buf_len--;
+		rain->buf_rd_idx = (rain->buf_rd_idx + 1) & 0xff;
+
+		spin_unlock_irqrestore(&rain->buf_lock, flags);
+
+		if (!rain->cmd_started && data != '?')
+			continue;
+
+		switch (data) {
+		case '\r':
+			rain->cmd[rain->cmd_idx] = '\0';
+			dev_dbg(rain->dev, "received: %s\n", rain->cmd);
+			if (!memcmp(rain->cmd, "REC", 3) ||
+			    !memcmp(rain->cmd, "STA", 3)) {
+				rain_process_msg(rain);
+			} else {
+				strscpy(rain->cmd_reply, rain->cmd,
+					sizeof(rain->cmd_reply));
+				complete(&rain->cmd_done);
+			}
+			rain->cmd_idx = 0;
+			rain->cmd_started = false;
+			break;
+
+		case '\n':
+			rain->cmd_idx = 0;
+			rain->cmd_started = false;
+			break;
+
+		case '?':
+			rain->cmd_idx = 0;
+			rain->cmd_started = true;
+			break;
+
+		default:
+			if (rain->cmd_idx >= DATA_SIZE - 1) {
+				dev_dbg(rain->dev,
+					"throwing away %d bytes of garbage\n", rain->cmd_idx);
+				rain->cmd_idx = 0;
+			}
+			rain->cmd[rain->cmd_idx++] = data;
+			break;
+		}
+	}
+}
+
+static irqreturn_t rain_interrupt(struct serio *serio, unsigned char data,
+				    unsigned int flags)
+{
+	struct rain *rain = serio_get_drvdata(serio);
+
+	if (rain->buf_len == DATA_SIZE) {
+		dev_warn_once(rain->dev, "buffer overflow\n");
+		return IRQ_HANDLED;
+	}
+	spin_lock(&rain->buf_lock);
+	rain->buf_len++;
+	rain->buf[rain->buf_wr_idx] = data;
+	rain->buf_wr_idx = (rain->buf_wr_idx + 1) & 0xff;
+	spin_unlock(&rain->buf_lock);
+	schedule_work(&rain->work);
+	return IRQ_HANDLED;
+}
+
+static void rain_disconnect(struct serio *serio)
+{
+	struct rain *rain = serio_get_drvdata(serio);
+
+	cancel_work_sync(&rain->work);
+	cec_unregister_adapter(rain->adap);
+	dev_info(&serio->dev, "disconnected\n");
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	kfree(rain);
+}
+
+static int rain_send(struct rain *rain, const char *command)
+{
+	int err = serio_write(rain->serio, '!');
+
+	dev_dbg(rain->dev, "send: %s\n", command);
+	while (!err && *command)
+		err = serio_write(rain->serio, *command++);
+	if (!err)
+		err = serio_write(rain->serio, '~');
+
+	return err;
+}
+
+static int rain_send_and_wait(struct rain *rain,
+			      const char *cmd, const char *reply)
+{
+	int err;
+
+	init_completion(&rain->cmd_done);
+
+	mutex_lock(&rain->write_lock);
+	err = rain_send(rain, cmd);
+	if (err)
+		goto err;
+
+	if (!wait_for_completion_timeout(&rain->cmd_done, HZ)) {
+		err = -ETIMEDOUT;
+		goto err;
+	}
+	if (reply && strncmp(rain->cmd_reply, reply, strlen(reply))) {
+		dev_dbg(rain->dev,
+			 "transmit of '%s': received '%s' instead of '%s'\n",
+			 cmd, rain->cmd_reply, reply);
+		err = -EIO;
+	}
+err:
+	mutex_unlock(&rain->write_lock);
+	return err;
+}
+
+static int rain_setup(struct rain *rain, struct serio *serio,
+			struct cec_log_addrs *log_addrs, u16 *pa)
+{
+	int err;
+
+	err = rain_send_and_wait(rain, "R", "REV");
+	if (err)
+		return err;
+	dev_info(rain->dev, "Firmware version %s\n", rain->cmd_reply + 4);
+
+	err = rain_send_and_wait(rain, "Q 1", "QTY");
+	if (err)
+		return err;
+	err = rain_send_and_wait(rain, "c0000", "CFG");
+	if (err)
+		return err;
+	return rain_send_and_wait(rain, "A F 0000", "ADR");
+}
+
+static int rain_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	return 0;
+}
+
+static int rain_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+	struct rain *rain = cec_get_drvdata(adap);
+	u8 cmd[16];
+
+	if (log_addr == CEC_LOG_ADDR_INVALID)
+		log_addr = CEC_LOG_ADDR_UNREGISTERED;
+	snprintf(cmd, sizeof(cmd), "A %x", log_addr);
+	return rain_send_and_wait(rain, cmd, "ADR");
+}
+
+static int rain_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				    u32 signal_free_time, struct cec_msg *msg)
+{
+	struct rain *rain = cec_get_drvdata(adap);
+	char cmd[2 * CEC_MAX_MSG_SIZE + 16];
+	unsigned int i;
+	int err;
+
+	if (msg->len == 1) {
+		snprintf(cmd, sizeof(cmd), "x%x", cec_msg_destination(msg));
+	} else {
+		char hex[3];
+
+		snprintf(cmd, sizeof(cmd), "x%x %02x ",
+			 cec_msg_destination(msg), msg->msg[1]);
+		for (i = 2; i < msg->len; i++) {
+			snprintf(hex, sizeof(hex), "%02x", msg->msg[i]);
+			strlcat(cmd, hex, sizeof(cmd));
+		}
+	}
+	mutex_lock(&rain->write_lock);
+	err = rain_send(rain, cmd);
+	mutex_unlock(&rain->write_lock);
+	return err;
+}
+
+static const struct cec_adap_ops rain_cec_adap_ops = {
+	.adap_enable = rain_cec_adap_enable,
+	.adap_log_addr = rain_cec_adap_log_addr,
+	.adap_transmit = rain_cec_adap_transmit,
+};
+
+static int rain_connect(struct serio *serio, struct serio_driver *drv)
+{
+	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_PHYS_ADDR | CEC_CAP_MONITOR_ALL;
+	struct rain *rain;
+	int err = -ENOMEM;
+	struct cec_log_addrs log_addrs = {};
+	u16 pa = CEC_PHYS_ADDR_INVALID;
+
+	rain = kzalloc(sizeof(*rain), GFP_KERNEL);
+
+	if (!rain)
+		return -ENOMEM;
+
+	rain->serio = serio;
+	rain->adap = cec_allocate_adapter(&rain_cec_adap_ops, rain,
+					  dev_name(&serio->dev), caps, 1);
+	err = PTR_ERR_OR_ZERO(rain->adap);
+	if (err < 0)
+		goto free_device;
+
+	rain->dev = &serio->dev;
+	serio_set_drvdata(serio, rain);
+	INIT_WORK(&rain->work, rain_irq_work_handler);
+	mutex_init(&rain->write_lock);
+	spin_lock_init(&rain->buf_lock);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto delete_adap;
+
+	err = rain_setup(rain, serio, &log_addrs, &pa);
+	if (err)
+		goto close_serio;
+
+	err = cec_register_adapter(rain->adap, &serio->dev);
+	if (err < 0)
+		goto close_serio;
+
+	rain->dev = &rain->adap->devnode.dev;
+	return 0;
+
+close_serio:
+	serio_close(serio);
+delete_adap:
+	cec_delete_adapter(rain->adap);
+	serio_set_drvdata(serio, NULL);
+free_device:
+	kfree(rain);
+	return err;
+}
+
+static const struct serio_device_id rain_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_RAINSHADOW_CEC,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, rain_serio_ids);
+
+static struct serio_driver rain_drv = {
+	.driver		= {
+		.name	= "rainshadow-cec",
+	},
+	.description	= "RainShadow Tech HDMI CEC driver",
+	.id_table	= rain_serio_ids,
+	.interrupt	= rain_interrupt,
+	.connect	= rain_connect,
+	.disconnect	= rain_disconnect,
+};
+
+module_serio_driver(rain_drv);
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig
index 1990b7f09454..4ea03b7899a8 100644
--- a/drivers/media/common/Kconfig
+++ b/drivers/media/common/Kconfig
@@ -14,7 +14,7 @@ config VIDEO_TVEEPROM
 	depends on I2C
 
 config CYPRESS_FIRMWARE
-	tristate "Cypress firmware helper routines"
+	tristate
 	depends on USB
 
 source "drivers/media/common/videobuf2/Kconfig"
diff --git a/drivers/media/common/videobuf2/videobuf2-dma-sg.c b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
index 6db60e9d5183..92072a08af25 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-sg.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
@@ -309,8 +309,7 @@ static void *vb2_dma_sg_vaddr(void *buf_priv)
 		if (buf->db_attach)
 			buf->vaddr = dma_buf_vmap(buf->db_attach->dmabuf);
 		else
-			buf->vaddr = vm_map_ram(buf->pages,
-					buf->num_pages, -1, PAGE_KERNEL);
+			buf->vaddr = vm_map_ram(buf->pages, buf->num_pages, -1);
 	}
 
 	/* add offset in case userptr is not page-aligned */
diff --git a/drivers/media/common/videobuf2/videobuf2-vmalloc.c b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
index 1a4f0ca87c7c..c66fda4a65e4 100644
--- a/drivers/media/common/videobuf2/videobuf2-vmalloc.c
+++ b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
@@ -107,8 +107,7 @@ static void *vb2_vmalloc_get_userptr(struct device *dev, unsigned long vaddr,
 		buf->vaddr = (__force void *)
 			ioremap(__pfn_to_phys(nums[0]), size + offset);
 	} else {
-		buf->vaddr = vm_map_ram(frame_vector_pages(vec), n_pages, -1,
-					PAGE_KERNEL);
+		buf->vaddr = vm_map_ram(frame_vector_pages(vec), n_pages, -1);
 	}
 
 	if (!buf->vaddr)
diff --git a/drivers/media/dvb-core/Kconfig b/drivers/media/dvb-core/Kconfig
index 90e038d5ffd9..6ffac618417b 100644
--- a/drivers/media/dvb-core/Kconfig
+++ b/drivers/media/dvb-core/Kconfig
@@ -3,6 +3,32 @@
 # DVB device configuration
 #
 
+config DVB_MMAP
+	bool "Enable DVB memory-mapped API (EXPERIMENTAL)"
+	depends on DVB_CORE
+	depends on VIDEO_V4L2=y || VIDEO_V4L2=DVB_CORE
+	select VIDEOBUF2_VMALLOC
+	help
+	  This option enables DVB experimental memory-mapped API, which
+	  reduces the number of context switches to read DVB buffers, as
+	  the buffers can use mmap() syscalls.
+
+	  Support for it is experimental. Use with care. If unsure,
+	  say N.
+
+config DVB_NET
+	bool "DVB Network Support"
+	default (NET && INET)
+	depends on NET && INET && DVB_CORE
+	help
+	  This option enables DVB Network Support which is a part of the DVB
+	  standard. It is used, for example, by automatic firmware updates used
+	  on Set-Top-Boxes. It can also be used to access the Internet via the
+	  DVB card, if the network provider supports it.
+
+	  You may want to disable the network support on embedded devices. If
+	  unsure say Y.
+
 config DVB_MAX_ADAPTERS
 	int "maximum number of DVB/ATSC adapters"
 	depends on DVB_CORE
@@ -19,6 +45,7 @@ config DVB_MAX_ADAPTERS
 config DVB_DYNAMIC_MINORS
 	bool "Dynamic DVB minor allocation"
 	depends on DVB_CORE
+	default y
 	help
 	  If you say Y here, the DVB subsystem will use dynamic minor
 	  allocation for any device that uses the DVB major number.
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index a29e9ddf9c82..643b851a6b60 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -1,4 +1,8 @@
-comment "DVB Frontend drivers hidden by 'Autoselect ancillary drivers'"
+# SPDX-License-Identifier: GPL-2.0
+
+if MEDIA_DIGITAL_TV_SUPPORT
+
+comment "DVB Frontend drivers auto-selected by 'Autoselect ancillary drivers'"
 	depends on MEDIA_HIDE_ANCILLARY_SUBDRV
 
 menu "Customise DVB Frontends"
@@ -943,9 +947,15 @@ config DVB_SP2
 	help
 	  CIMaX SP2/SP2HF Common Interface module.
 
+endmenu # Customise DVB Frontends
+
+endif # MEDIA_DIGITAL_TV_SUPPORT
+
 comment "Tools to develop new frontends"
+	depends on MEDIA_TEST_SUPPORT
 
 config DVB_DUMMY_FE
 	tristate "Dummy frontend driver"
-	depends on DVB_CORE
-endmenu
+	depends on MEDIA_TEST_SUPPORT && DVB_CORE
+	help
+	  Dummy skeleton frontend driver.
diff --git a/drivers/media/dvb-frontends/dib3000.h b/drivers/media/dvb-frontends/dib3000.h
index 9118a7a48ef2..3f129efa21de 100644
--- a/drivers/media/dvb-frontends/dib3000.h
+++ b/drivers/media/dvb-frontends/dib3000.h
@@ -14,7 +14,7 @@
  *  Amaury Demol from DiBcom for providing specs and driver
  *  sources, on which this driver (and the dvb-dibusb) are based.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 
 #ifndef DIB3000_H
diff --git a/drivers/media/dvb-frontends/dib3000mb.c b/drivers/media/dvb-frontends/dib3000mb.c
index 46ed0e20c8fa..0f0480d8576d 100644
--- a/drivers/media/dvb-frontends/dib3000mb.c
+++ b/drivers/media/dvb-frontends/dib3000mb.c
@@ -14,7 +14,7 @@
  *  Amaury Demol from DiBcom for providing specs and driver
  *  sources, on which this driver (and the dvb-dibusb) are based.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/media/dvb-frontends/eds1547.h b/drivers/media/dvb-frontends/eds1547.h
index 907254b85708..bb85a6e27076 100644
--- a/drivers/media/dvb-frontends/eds1547.h
+++ b/drivers/media/dvb-frontends/eds1547.h
@@ -3,7 +3,7 @@
 *
 * Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
 *
-* see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+* see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
 */
 
 #ifndef EDS1547
diff --git a/drivers/media/dvb-frontends/lgdt3306a.c b/drivers/media/dvb-frontends/lgdt3306a.c
index 6c4adec58174..d3c330e035c4 100644
--- a/drivers/media/dvb-frontends/lgdt3306a.c
+++ b/drivers/media/dvb-frontends/lgdt3306a.c
@@ -846,6 +846,7 @@ static int lgdt3306a_fe_sleep(struct dvb_frontend *fe)
 static int lgdt3306a_init(struct dvb_frontend *fe)
 {
 	struct lgdt3306a_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 	u8 val;
 	int ret;
 
@@ -997,6 +998,9 @@ static int lgdt3306a_init(struct dvb_frontend *fe)
 	ret = lgdt3306a_sleep(state);
 	lg_chkerr(ret);
 
+	c->cnr.len = 1;
+	c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
 fail:
 	return ret;
 }
@@ -1597,6 +1601,7 @@ static int lgdt3306a_read_status(struct dvb_frontend *fe,
 				 enum fe_status *status)
 {
 	struct lgdt3306a_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 	u16 strength = 0;
 	int ret = 0;
 
@@ -1637,6 +1642,15 @@ static int lgdt3306a_read_status(struct dvb_frontend *fe,
 		default:
 			ret = -EINVAL;
 		}
+
+		if (*status & FE_HAS_SYNC) {
+			c->cnr.len = 1;
+			c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
+			c->cnr.stat[0].svalue = lgdt3306a_calculate_snr_x100(state) * 10;
+		} else {
+			c->cnr.len = 1;
+			c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+		}
 	}
 	return ret;
 }
diff --git a/drivers/media/dvb-frontends/m88ds3103.c b/drivers/media/dvb-frontends/m88ds3103.c
index d2c28dcf6b42..f204e715bc59 100644
--- a/drivers/media/dvb-frontends/m88ds3103.c
+++ b/drivers/media/dvb-frontends/m88ds3103.c
@@ -980,6 +980,8 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe)
 			goto err;
 
 		ret = m88ds3103_update_bits(dev, 0xc9, 0x08, 0x08);
+		if (ret)
+			goto err;
 	}
 
 	dev_dbg(&client->dev, "carrier offset=%d\n",
@@ -1898,7 +1900,7 @@ static int m88ds3103_probe(struct i2c_client *client,
 		if (ret)
 			goto err_kfree;
 		dev->dt_addr = ((utmp & 0x80) == 0) ? 0x42 >> 1 : 0x40 >> 1;
-		dev_err(&client->dev, "dt addr is 0x%02x", dev->dt_addr);
+		dev_dbg(&client->dev, "dt addr is 0x%02x\n", dev->dt_addr);
 
 		dev->dt_client = i2c_new_dummy_device(client->adapter,
 						      dev->dt_addr);
diff --git a/drivers/media/dvb-frontends/z0194a.h b/drivers/media/dvb-frontends/z0194a.h
index 21442905d116..3446ccbf3c1c 100644
--- a/drivers/media/dvb-frontends/z0194a.h
+++ b/drivers/media/dvb-frontends/z0194a.h
@@ -3,7 +3,7 @@
 *
 * Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
 *
-* see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+* see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
 */
 
 #ifndef Z0194A
diff --git a/drivers/media/firewire/Kconfig b/drivers/media/firewire/Kconfig
index e7837da5905b..0c1f326f581f 100644
--- a/drivers/media/firewire/Kconfig
+++ b/drivers/media/firewire/Kconfig
@@ -1,7 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0-only
+if DVB_CORE && FIREWIRE
+comment "FireWire (IEEE 1394) Adapters"
+
 config DVB_FIREDTV
 	tristate "FireDTV and FloppyDTV"
-	depends on DVB_CORE && FIREWIRE
 	help
 	  Support for DVB receivers from Digital Everywhere
 	  which are connected via IEEE 1394 (FireWire).
@@ -18,3 +20,4 @@ config DVB_FIREDTV_INPUT
 	def_bool INPUT = y || (INPUT = m && DVB_FIREDTV = m)
 
 endif # DVB_FIREDTV
+endif # DVB_CORE && FIREWIRE
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 125d596c13dd..3abc80373ec0 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -5,6 +5,9 @@
 
 if VIDEO_V4L2
 
+comment "IR I2C driver auto-selected by 'Autoselect ancillary drivers'"
+	depends on MEDIA_SUBDRV_AUTOSELECT && I2C && RC_CORE
+
 config VIDEO_IR_I2C
 	tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT || EXPERT
 	depends on I2C && RC_CORE
@@ -19,17 +22,18 @@ config VIDEO_IR_I2C
 	  In doubt, say Y.
 
 #
-# Encoder / Decoder module configuration
+# V4L2 I2C drivers that aren't related with Camera support
 #
 
-comment "I2C drivers hidden by 'Autoselect ancillary drivers'"
+comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'"
 	depends on MEDIA_HIDE_ANCILLARY_SUBDRV
+#
+# Encoder / Decoder module configuration
+#
 
-menu "I2C Encoders, decoders, sensors and other helper chips"
+menu "Audio decoders, processors and mixers"
 	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 
-comment "Audio decoders, processors and mixers"
-
 config VIDEO_TVAUDIO
 	tristate "Simple audio decoder chips"
 	depends on VIDEO_V4L2 && I2C
@@ -62,11 +66,13 @@ config VIDEO_TDA9840
 
 config VIDEO_TDA1997X
 	tristate "NXP TDA1997x HDMI receiver"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && I2C
 	depends on SND_SOC
 	select HDMI
 	select SND_PCM
 	select V4L2_FWNODE
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
 
@@ -185,8 +191,10 @@ config VIDEO_SONY_BTF_MPX
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called sony-btf-mpx.
+endmenu
 
-comment "RDS decoders"
+menu "RDS decoders"
+	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 
 config VIDEO_SAA6588
 	tristate "SAA6588 Radio Chip RDS decoder support"
@@ -199,12 +207,16 @@ config VIDEO_SAA6588
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called saa6588.
+endmenu
 
-comment "Video decoders"
+menu "Video decoders"
+	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 
 config VIDEO_ADV7180
 	tristate "Analog Devices ADV7180 decoder"
-	depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on GPIOLIB && VIDEO_V4L2 && I2C
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  Support for the Analog Devices ADV7180 video decoder.
 
@@ -223,8 +235,10 @@ config VIDEO_ADV7183
 
 config VIDEO_ADV748X
 	tristate "Analog Devices ADV748x decoder"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && I2C
 	depends on OF
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select REGMAP_I2C
 	select V4L2_FWNODE
 	help
@@ -236,8 +250,10 @@ config VIDEO_ADV748X
 
 config VIDEO_ADV7604
 	tristate "Analog Devices ADV7604 decoder"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && I2C
 	depends on GPIOLIB || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select REGMAP_I2C
 	select HDMI
 	select V4L2_FWNODE
@@ -260,7 +276,9 @@ config VIDEO_ADV7604_CEC
 
 config VIDEO_ADV7842
 	tristate "Analog Devices ADV7842 decoder"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && I2C
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select HDMI
 	help
 	  Support for the Analog Devices ADV7842 video decoder.
@@ -347,7 +365,9 @@ config VIDEO_SAA711X
 
 config VIDEO_TC358743
 	tristate "Toshiba TC358743 decoder"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && I2C
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select HDMI
 	select V4L2_FWNODE
 	help
@@ -457,7 +477,10 @@ config VIDEO_SAA717X
 
 source "drivers/media/i2c/cx25840/Kconfig"
 
-comment "Video encoders"
+endmenu
+
+menu "Video encoders"
+	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 
 config VIDEO_SAA7127
 	tristate "Philips SAA7127/9 digital video encoders"
@@ -515,8 +538,10 @@ config VIDEO_ADV7393
 
 config VIDEO_ADV7511
 	tristate "Analog Devices ADV7511 encoder"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && I2C
 	depends on DRM_I2C_ADV7511=n || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select HDMI
 	help
 	  Support for the Analog Devices ADV7511 video encoder.
@@ -536,7 +561,10 @@ config VIDEO_ADV7511_CEC
 
 config VIDEO_AD9389B
 	tristate "Analog Devices AD9389B encoder"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && I2C
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+
 	help
 	  Support for the Analog Devices AD9389B video encoder.
 
@@ -559,8 +587,124 @@ config VIDEO_THS8200
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ths8200.
+endmenu
+
+menu "Video improvement chips"
+	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_UPD64031A
+	tristate "NEC Electronics uPD64031A Ghost Reduction"
+	depends on VIDEO_V4L2 && I2C
+	help
+	  Support for the NEC Electronics uPD64031A Ghost Reduction
+	  video chip. It is most often found in NTSC TV cards made for
+	  Japan and is used to reduce the 'ghosting' effect that can
+	  be present in analog TV broadcasts.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd64031a.
+
+config VIDEO_UPD64083
+	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
+	depends on VIDEO_V4L2 && I2C
+	help
+	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+	  separation video chip. It is used to improve the quality of
+	  the colors of a composite signal.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd64083.
+endmenu
+
+menu "Audio/Video compression chips"
+	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_SAA6752HS
+	tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
+	depends on VIDEO_V4L2 && I2C
+	select CRC32
+	help
+	  Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
+	  audio encoder with multiplexer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa6752hs.
+
+endmenu
+
+menu "SDR tuner chips"
+	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 
-comment "Camera sensor devices"
+config SDR_MAX2175
+	tristate "Maxim 2175 RF to Bits tuner"
+	depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
+	select REGMAP_I2C
+	help
+	  Support for Maxim 2175 tuner. It is an advanced analog/digital
+	  radio receiver with RF-to-Bits front-end designed for SDR solutions.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called max2175.
+
+
+endmenu
+
+menu "Miscellaneous helper chips"
+	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_THS7303
+	tristate "THS7303/53 Video Amplifier"
+	depends on VIDEO_V4L2 && I2C
+	help
+	  Support for TI THS7303/53 video amplifier
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ths7303.
+
+config VIDEO_M52790
+	tristate "Mitsubishi M52790 A/V switch"
+	depends on VIDEO_V4L2 && I2C
+	help
+	 Support for the Mitsubishi M52790 A/V switch.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called m52790.
+
+config VIDEO_I2C
+	tristate "I2C transport video support"
+	depends on VIDEO_V4L2 && I2C
+	select VIDEOBUF2_VMALLOC
+	imply HWMON
+	help
+	  Enable the I2C transport video support which supports the
+	  following:
+	   * Panasonic AMG88xx Grid-Eye Sensors
+	   * Melexis MLX90640 Thermal Cameras
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called video-i2c
+
+config VIDEO_ST_MIPID02
+	tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select V4L2_FWNODE
+	help
+	  Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
+	  It is used to allow usage of CSI-2 sensor with PARALLEL port
+	  controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called st-mipid02.
+endmenu
+
+#
+# V4L2 I2C drivers that are related with Camera support
+#
+
+menu "Camera sensor devices"
+	visible if MEDIA_CAMERA_SUPPORT
 
 config VIDEO_APTINA_PLL
 	tristate
@@ -568,12 +712,11 @@ config VIDEO_APTINA_PLL
 config VIDEO_SMIAPP_PLL
 	tristate
 
-if MEDIA_CAMERA_SUPPORT
-
 config VIDEO_HI556
 	tristate "Hynix Hi-556 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CONTROLLER
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the Hynix
@@ -584,8 +727,10 @@ config VIDEO_HI556
 
 config VIDEO_IMX214
 	tristate "Sony IMX214 sensor support"
-	depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on GPIOLIB && I2C && VIDEO_V4L2
 	depends on V4L2_FWNODE
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select REGMAP_I2C
 	help
 	  This is a Video4Linux2 sensor driver for the Sony
@@ -596,7 +741,9 @@ config VIDEO_IMX214
 
 config VIDEO_IMX219
 	tristate "Sony IMX219 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the Sony
@@ -607,7 +754,9 @@ config VIDEO_IMX219
 
 config VIDEO_IMX258
 	tristate "Sony IMX258 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This is a Video4Linux2 sensor driver for the Sony
 	  IMX258 camera.
@@ -617,7 +766,9 @@ config VIDEO_IMX258
 
 config VIDEO_IMX274
 	tristate "Sony IMX274 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select REGMAP_I2C
 	help
 	  This is a V4L2 sensor driver for the Sony IMX274
@@ -625,7 +776,9 @@ config VIDEO_IMX274
 
 config VIDEO_IMX290
 	tristate "Sony IMX290 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select REGMAP_I2C
 	select V4L2_FWNODE
 	help
@@ -637,7 +790,9 @@ config VIDEO_IMX290
 
 config VIDEO_IMX319
 	tristate "Sony IMX319 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This is a Video4Linux2 sensor driver for the Sony
 	  IMX319 camera.
@@ -647,7 +802,9 @@ config VIDEO_IMX319
 
 config VIDEO_IMX355
 	tristate "Sony IMX355 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This is a Video4Linux2 sensor driver for the Sony
 	  IMX355 camera.
@@ -678,7 +835,8 @@ config VIDEO_OV2659
 
 config VIDEO_OV2680
 	tristate "OmniVision OV2680 sensor support"
-	depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
+	depends on VIDEO_V4L2 && I2C
+	select MEDIA_CONTROLLER
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -689,7 +847,8 @@ config VIDEO_OV2680
 
 config VIDEO_OV2685
 	tristate "OmniVision OV2685 sensor support"
-	depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
+	depends on VIDEO_V4L2 && I2C
+	select MEDIA_CONTROLLER
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -701,7 +860,9 @@ config VIDEO_OV2685
 config VIDEO_OV5640
 	tristate "OmniVision OV5640 sensor support"
 	depends on OF
-	depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on GPIOLIB && VIDEO_V4L2 && I2C
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the Omnivision
@@ -710,7 +871,9 @@ config VIDEO_OV5640
 config VIDEO_OV5645
 	tristate "OmniVision OV5645 sensor support"
 	depends on OF
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -721,7 +884,9 @@ config VIDEO_OV5645
 
 config VIDEO_OV5647
 	tristate "OmniVision OV5647 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -742,8 +907,9 @@ config VIDEO_OV6650
 
 config VIDEO_OV5670
 	tristate "OmniVision OV5670 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CONTROLLER
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -754,8 +920,9 @@ config VIDEO_OV5670
 
 config VIDEO_OV5675
 	tristate "OmniVision OV5675 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CONTROLLER
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -777,7 +944,9 @@ config VIDEO_OV5695
 
 config VIDEO_OV7251
 	tristate "OmniVision OV7251 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -826,7 +995,9 @@ config VIDEO_OV7740
 
 config VIDEO_OV8856
 	tristate "OmniVision OV8856 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -844,7 +1015,9 @@ config VIDEO_OV9640
 
 config VIDEO_OV9650
 	tristate "OmniVision OV9650/OV9652 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select REGMAP_SCCB
 	help
 	  This is a V4L2 sensor driver for the Omnivision
@@ -852,7 +1025,9 @@ config VIDEO_OV9650
 
 config VIDEO_OV13858
 	tristate "OmniVision OV13858 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -870,14 +1045,18 @@ config VIDEO_VS6624
 
 config VIDEO_MT9M001
 	tristate "mt9m001 support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This driver supports MT9M001 cameras from Micron, monochrome
 	  and colour models.
 
 config VIDEO_MT9M032
 	tristate "MT9M032 camera sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEO_APTINA_PLL
 	help
 	  This driver supports MT9M032 camera sensors from Aptina, monochrome
@@ -893,7 +1072,9 @@ config VIDEO_MT9M111
 
 config VIDEO_MT9P031
 	tristate "Aptina MT9P031 support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEO_APTINA_PLL
 	help
 	  This is a Video4Linux2 sensor driver for the Aptina
@@ -901,7 +1082,9 @@ config VIDEO_MT9P031
 
 config VIDEO_MT9T001
 	tristate "Aptina MT9T001 support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This is a Video4Linux2 sensor driver for the Aptina
 	  (Micron) mt0t001 3 Mpixel camera.
@@ -926,7 +1109,9 @@ config VIDEO_MT9V011
 
 config VIDEO_MT9V032
 	tristate "Micron MT9V032 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select REGMAP_I2C
 	select V4L2_FWNODE
 	help
@@ -951,7 +1136,9 @@ config VIDEO_SR030PC30
 
 config VIDEO_NOON010PC30
 	tristate "Siliconfile NOON010PC30 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This driver supports NOON010PC30 CIF camera from Siliconfile
 
@@ -969,21 +1156,27 @@ config VIDEO_RJ54N1
 
 config VIDEO_S5K6AA
 	tristate "Samsung S5K6AAFX sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
 	  camera sensor with an embedded SoC image signal processor.
 
 config VIDEO_S5K6A3
 	tristate "Samsung S5K6A3 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This is a V4L2 sensor driver for Samsung S5K6A3 raw
 	  camera sensor.
 
 config VIDEO_S5K4ECGX
 	tristate "Samsung S5K4ECGX sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select CRC32
 	help
 	  This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
@@ -991,7 +1184,9 @@ config VIDEO_S5K4ECGX
 
 config VIDEO_S5K5BAF
 	tristate "Samsung S5K5BAF sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a V4L2 sensor driver for Samsung S5K5BAF 2M
@@ -1002,28 +1197,32 @@ source "drivers/media/i2c/et8ek8/Kconfig"
 
 config VIDEO_S5C73M3
 	tristate "Samsung S5C73M3 sensor support"
-	depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && SPI && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a V4L2 sensor driver for Samsung S5C73M3
 	  8 Mpixel camera.
-endif
 
-comment "Lens drivers"
+endmenu
 
-if MEDIA_CAMERA_SUPPORT
+menu "Lens drivers"
+	visible if MEDIA_CAMERA_SUPPORT
 
 config VIDEO_AD5820
 	tristate "AD5820 lens voice coil support"
-	depends on GPIOLIB && I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on GPIOLIB && I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
 	help
 	  This is a driver for the AD5820 camera lens voice coil.
 	  It is used for example in Nokia N900 (RX-51).
 
 config VIDEO_AK7375
 	tristate "AK7375 lens voice coil support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This is a driver for the AK7375 camera lens voice coil.
 	  AK7375 is a 12 bit DAC with 120mA output current sink
@@ -1032,8 +1231,9 @@ config VIDEO_AK7375
 
 config VIDEO_DW9714
 	tristate "DW9714 lens voice coil support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This is a driver for the DW9714 camera lens voice coil.
 	  DW9714 is a 10 bit DAC with 120mA output current sink
@@ -1042,30 +1242,32 @@ config VIDEO_DW9714
 
 config VIDEO_DW9807_VCM
 	tristate "DW9807 lens voice coil support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This is a driver for the DW9807 camera lens voice coil.
 	  DW9807 is a 10 bit DAC with 100mA output current sink
 	  capability. This is designed for linear control of
 	  voice coil motors, controlled via I2C serial interface.
 
-endif
-
-comment "Flash devices"
+endmenu
 
-if MEDIA_CAMERA_SUPPORT
+menu "Flash devices"
+	visible if MEDIA_CAMERA_SUPPORT
 
 config VIDEO_ADP1653
 	tristate "ADP1653 flash support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
 	help
 	  This is a driver for the ADP1653 flash controller. It is used for
 	  example in Nokia N900.
 
 config VIDEO_LM3560
 	tristate "LM3560 dual flash driver support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
 	select REGMAP_I2C
 	help
 	  This is a driver for the lm3560 dual flash controllers. It controls
@@ -1073,112 +1275,12 @@ config VIDEO_LM3560
 
 config VIDEO_LM3646
 	tristate "LM3646 dual flash driver support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
 	select REGMAP_I2C
 	help
 	  This is a driver for the lm3646 dual flash controllers. It controls
 	  flash, torch LEDs.
-
-endif
-
-comment "Video improvement chips"
-
-config VIDEO_UPD64031A
-	tristate "NEC Electronics uPD64031A Ghost Reduction"
-	depends on VIDEO_V4L2 && I2C
-	help
-	  Support for the NEC Electronics uPD64031A Ghost Reduction
-	  video chip. It is most often found in NTSC TV cards made for
-	  Japan and is used to reduce the 'ghosting' effect that can
-	  be present in analog TV broadcasts.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called upd64031a.
-
-config VIDEO_UPD64083
-	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
-	depends on VIDEO_V4L2 && I2C
-	help
-	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
-	  separation video chip. It is used to improve the quality of
-	  the colors of a composite signal.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called upd64083.
-
-comment "Audio/Video compression chips"
-
-config VIDEO_SAA6752HS
-	tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
-	depends on VIDEO_V4L2 && I2C
-	select CRC32
-	help
-	  Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
-	  audio encoder with multiplexer.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa6752hs.
-
-comment "SDR tuner chips"
-
-config SDR_MAX2175
-	tristate "Maxim 2175 RF to Bits tuner"
-	depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
-	select REGMAP_I2C
-	help
-	  Support for Maxim 2175 tuner. It is an advanced analog/digital
-	  radio receiver with RF-to-Bits front-end designed for SDR solutions.
-
-	  To compile this driver as a module, choose M here; the
-	  module will be called max2175.
-
-comment "Miscellaneous helper chips"
-
-config VIDEO_THS7303
-	tristate "THS7303/53 Video Amplifier"
-	depends on VIDEO_V4L2 && I2C
-	help
-	  Support for TI THS7303/53 video amplifier
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ths7303.
-
-config VIDEO_M52790
-	tristate "Mitsubishi M52790 A/V switch"
-	depends on VIDEO_V4L2 && I2C
-	help
-	 Support for the Mitsubishi M52790 A/V switch.
-
-	 To compile this driver as a module, choose M here: the
-	 module will be called m52790.
-
-config VIDEO_I2C
-	tristate "I2C transport video support"
-	depends on VIDEO_V4L2 && I2C
-	select VIDEOBUF2_VMALLOC
-	imply HWMON
-	help
-	  Enable the I2C transport video support which supports the
-	  following:
-	   * Panasonic AMG88xx Grid-Eye Sensors
-	   * Melexis MLX90640 Thermal Cameras
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called video-i2c
-
-config VIDEO_ST_MIPID02
-	tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	select V4L2_FWNODE
-	help
-	  Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
-	  It is used to allow usage of CSI-2 sensor with PARALLEL port
-	  controller.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called st-mipid02.
-
 endmenu
 
-endif
+endif # VIDEO_V4L2
diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c
index 0de946fe2109..e2e935f78986 100644
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -997,14 +997,14 @@ static void cx23885_initialize(struct i2c_client *client)
 	 */
 	cx25840_write4(client, 0x404, 0x0010253e);
 
-	/* CC on  - Undocumented Register */
+	/* CC on  - VBI_LINE_CTRL3, FLD_VBI_MD_LINE12 */
 	cx25840_write(client, state->vbi_regs_offset + 0x42f, 0x66);
 
 	/* HVR-1250 / HVR1850 DIF related */
 	/* Power everything up */
 	cx25840_write4(client, 0x130, 0x0);
 
-	/* Undocumented */
+	/* SRC_COMB_CFG */
 	if (is_cx23888(state))
 		cx25840_write4(client, 0x454, 0x6628021F);
 	else
@@ -1486,24 +1486,24 @@ static int set_input(struct i2c_client *client,
 			cx25840_write4(client, 0x410, 0xffff0dbf);
 			cx25840_write4(client, 0x414, 0x00137d03);
 
-			cx25840_write4(client, state->vbi_regs_offset + 0x42c,
-				       0x42600000);
-			cx25840_write4(client, state->vbi_regs_offset + 0x430,
-				       0x0000039b);
-			cx25840_write4(client, state->vbi_regs_offset + 0x438,
-				       0x00000000);
-
-			cx25840_write4(client, state->vbi_regs_offset + 0x440,
-				       0xF8E3E824);
-			cx25840_write4(client, state->vbi_regs_offset + 0x444,
-				       0x401040dc);
-			cx25840_write4(client, state->vbi_regs_offset + 0x448,
-				       0xcd3f02a0);
-			cx25840_write4(client, state->vbi_regs_offset + 0x44c,
-				       0x161f1000);
-			cx25840_write4(client, state->vbi_regs_offset + 0x450,
-				       0x00000802);
-
+			if (is_cx23888(state)) {
+				/* 888 MISC_TIM_CTRL */
+				cx25840_write4(client, 0x42c, 0x42600000);
+				/* 888 FIELD_COUNT */
+				cx25840_write4(client, 0x430, 0x0000039b);
+				/* 888 VSCALE_CTRL */
+				cx25840_write4(client, 0x438, 0x00000000);
+				/* 888 DFE_CTRL1 */
+				cx25840_write4(client, 0x440, 0xF8E3E824);
+				/* 888 DFE_CTRL2 */
+				cx25840_write4(client, 0x444, 0x401040dc);
+				/* 888 DFE_CTRL3 */
+				cx25840_write4(client, 0x448, 0xcd3f02a0);
+				/* 888 PLL_CTRL */
+				cx25840_write4(client, 0x44c, 0x161f1000);
+				/* 888 HTL_CTRL */
+				cx25840_write4(client, 0x450, 0x00000802);
+			}
 			cx25840_write4(client, 0x91c, 0x01000000);
 			cx25840_write4(client, 0x8e0, 0x03063870);
 			cx25840_write4(client, 0x8d4, 0x7FFF0024);
diff --git a/drivers/media/i2c/et8ek8/Kconfig b/drivers/media/i2c/et8ek8/Kconfig
index 1c6909874d56..afcc4ea764f6 100644
--- a/drivers/media/i2c/et8ek8/Kconfig
+++ b/drivers/media/i2c/et8ek8/Kconfig
@@ -1,7 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config VIDEO_ET8EK8
 	tristate "ET8EK8 camera sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  This is a driver for the Toshiba ET8EK8 5 MP camera sensor.
diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig
index e573482f269f..6f0ef33b7ee1 100644
--- a/drivers/media/i2c/m5mols/Kconfig
+++ b/drivers/media/i2c/m5mols/Kconfig
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config VIDEO_M5MOLS
 	tristate "Fujitsu M-5MOLS 8MP sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  This driver supports Fujitsu M-5MOLS camera sensor with ISP
diff --git a/drivers/media/i2c/max2175.c b/drivers/media/i2c/max2175.c
index 506a30e69ced..03b4ed3a61b8 100644
--- a/drivers/media/i2c/max2175.c
+++ b/drivers/media/i2c/max2175.c
@@ -1194,7 +1194,7 @@ static const struct v4l2_ctrl_ops max2175_ctrl_ops = {
 
 /*
  * I2S output enable/disable configuration. This is a private control.
- * Refer to Documentation/media/v4l-drivers/max2175.rst for more details.
+ * Refer to Documentation/userspace-api/media/drivers/max2175.rst for more details.
  */
 static const struct v4l2_ctrl_config max2175_i2s_en = {
 	.ops = &max2175_ctrl_ops,
@@ -1210,7 +1210,7 @@ static const struct v4l2_ctrl_config max2175_i2s_en = {
 
 /*
  * HSLS value control LO freq adjacent location configuration.
- * Refer to Documentation/media/v4l-drivers/max2175.rst for more details.
+ * Refer to Documentation/userspace-api/media/drivers/max2175.rst for more details.
  */
 static const struct v4l2_ctrl_config max2175_hsls = {
 	.ops = &max2175_ctrl_ops,
@@ -1226,7 +1226,7 @@ static const struct v4l2_ctrl_config max2175_hsls = {
 /*
  * Rx modes below are a set of preset configurations that decides the tuner's
  * sck and sample rate of transmission. They are separate for EU & NA regions.
- * Refer to Documentation/media/v4l-drivers/max2175.rst for more details.
+ * Refer to Documentation/userspace-api/media/drivers/max2175.rst for more details.
  */
 static const char * const max2175_ctrl_eu_rx_modes[] = {
 	[MAX2175_EU_FM_1_2]	= "EU FM 1.2",
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 854031f0b64a..2fe4a7ac0592 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -3093,8 +3093,8 @@ static int ov5640_probe(struct i2c_client *client)
 free_ctrls:
 	v4l2_ctrl_handler_free(&sensor->ctrls.handler);
 entity_cleanup:
-	mutex_destroy(&sensor->lock);
 	media_entity_cleanup(&sensor->sd.entity);
+	mutex_destroy(&sensor->lock);
 	return ret;
 }
 
@@ -3104,9 +3104,9 @@ static int ov5640_remove(struct i2c_client *client)
 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
 
 	v4l2_async_unregister_subdev(&sensor->sd);
-	mutex_destroy(&sensor->lock);
 	media_entity_cleanup(&sensor->sd.entity);
 	v4l2_ctrl_handler_free(&sensor->ctrls.handler);
+	mutex_destroy(&sensor->lock);
 
 	return 0;
 }
diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c
index cdfe008ba39f..42584a088273 100644
--- a/drivers/media/i2c/s5k5baf.c
+++ b/drivers/media/i2c/s5k5baf.c
@@ -281,7 +281,7 @@ struct s5k5baf_fw {
 		u16 id;
 		u16 offset;
 	} seq[0];
-	u16 data[0];
+	u16 data[];
 };
 
 struct s5k5baf {
diff --git a/drivers/media/i2c/smiapp/Kconfig b/drivers/media/i2c/smiapp/Kconfig
index fcaa7f9494a8..6893b532824f 100644
--- a/drivers/media/i2c/smiapp/Kconfig
+++ b/drivers/media/i2c/smiapp/Kconfig
@@ -1,8 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config VIDEO_SMIAPP
 	tristate "SMIA++/SMIA sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
-	depends on MEDIA_CAMERA_SUPPORT
+	depends on I2C && VIDEO_V4L2 && HAVE_CLK
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEO_SMIAPP_PLL
 	select V4L2_FWNODE
 	help
diff --git a/drivers/media/mc/Kconfig b/drivers/media/mc/Kconfig
index 3b9795cfcb36..4815b9dde9af 100644
--- a/drivers/media/mc/Kconfig
+++ b/drivers/media/mc/Kconfig
@@ -1,17 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+
 #
 # Media controller
-#	Selectable only for webcam/grabbers, as other drivers don't use it
 #
 
-config MEDIA_CONTROLLER
-	bool "Media Controller API"
-	depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
-	help
-	  Enable the media controller API used to query media devices internal
-	  topology and configure it dynamically.
-
-	  This API is mostly used by camera interfaces in embedded platforms.
-
 config MEDIA_CONTROLLER_DVB
 	bool "Enable Media controller for DVB (EXPERIMENTAL)"
 	depends on MEDIA_CONTROLLER && DVB_CORE
@@ -21,8 +13,8 @@ config MEDIA_CONTROLLER_DVB
 	  This is currently experimental.
 
 config MEDIA_CONTROLLER_REQUEST_API
-	bool "Enable Media controller Request API (EXPERIMENTAL)"
-	depends on MEDIA_CONTROLLER && STAGING_MEDIA
+	bool
+	depends on MEDIA_CONTROLLER
 	help
 	  DO NOT ENABLE THIS OPTION UNLESS YOU KNOW WHAT YOU'RE DOING.
 
@@ -31,3 +23,6 @@ config MEDIA_CONTROLLER_REQUEST_API
 
 	  There is currently no intention to provide API or ABI stability for
 	  this new API as of yet.
+
+comment "Please notice that the enabled Media controller Request API is EXPERIMENTAL"
+	depends on MEDIA_CONTROLLER_REQUEST_API
diff --git a/drivers/media/mmc/Kconfig b/drivers/media/mmc/Kconfig
index de0528c6994a..75aa6de08d53 100644
--- a/drivers/media/mmc/Kconfig
+++ b/drivers/media/mmc/Kconfig
@@ -1,3 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-comment "Supported MMC/SDIO adapters"
 source "drivers/media/mmc/siano/Kconfig"
diff --git a/drivers/media/mmc/siano/Kconfig b/drivers/media/mmc/siano/Kconfig
index 1919f6fea8b1..570696019a9e 100644
--- a/drivers/media/mmc/siano/Kconfig
+++ b/drivers/media/mmc/siano/Kconfig
@@ -2,6 +2,8 @@
 #
 # Siano Mobile Silicon Digital TV device configuration
 #
+comment "MMC/SDIO DVB adapters"
+	depends on DVB_CORE && HAS_DMA && MMC
 
 config SMS_SDIO_DRV
 	tristate "Siano SMS1xxx based MDTV via SDIO interface"
diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
index dcb3719f440e..2cd8e328dda9 100644
--- a/drivers/media/pci/Kconfig
+++ b/drivers/media/pci/Kconfig
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
-if PCI && MEDIA_SUPPORT
+
+if PCI
 
 menuconfig MEDIA_PCI_SUPPORT
 	bool "Media PCI Adapters"
@@ -56,5 +57,16 @@ endif
 
 source "drivers/media/pci/intel/ipu3/Kconfig"
 
+config VIDEO_PCI_SKELETON
+	tristate "Skeleton PCI V4L2 driver"
+	depends on SAMPLES
+	depends on MEDIA_TEST_SUPPORT
+	depends on PCI && VIDEO_V4L2
+	select VIDEOBUF2_MEMOPS
+	select VIDEOBUF2_DMA_CONTIG
+	help
+	  Enable build of the skeleton PCI driver, used as a reference
+	  when developing new drivers.
+
 endif #MEDIA_PCI_SUPPORT
 endif #PCI
diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig
index 75d172a6f54c..3f56decbb681 100644
--- a/drivers/media/pci/bt8xx/Kconfig
+++ b/drivers/media/pci/bt8xx/Kconfig
@@ -17,7 +17,7 @@ config VIDEO_BT848
 	help
 	  Support for BT848 based frame grabber/overlay boards. This includes
 	  the Miro, Hauppauge and STB boards. Please read the material in
-	  <file:Documentation/media/v4l-drivers/bttv.rst> for more information.
+	  <file:Documentation/admin-guide/media/bttv.rst> for more information.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called bttv.
diff --git a/drivers/media/pci/cobalt/Kconfig b/drivers/media/pci/cobalt/Kconfig
index e0e7df460a92..d8d9ea6b09bc 100644
--- a/drivers/media/pci/cobalt/Kconfig
+++ b/drivers/media/pci/cobalt/Kconfig
@@ -1,11 +1,13 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config VIDEO_COBALT
 	tristate "Cisco Cobalt support"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && I2C
 	depends on PCI_MSI && MTD_COMPLEX_MAPPINGS
 	depends on (GPIOLIB && DRM_I2C_ADV7511=n) || COMPILE_TEST
 	depends on SND
 	depends on MTD
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select I2C_ALGOBIT
 	select SND_PCM
 	select VIDEO_ADV7604
diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c
index 3178df3c4922..c41bae118415 100644
--- a/drivers/media/pci/cx18/cx18-streams.c
+++ b/drivers/media/pci/cx18/cx18-streams.c
@@ -845,7 +845,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
 
 		/*
 		 * Audio related reset according to
-		 * Documentation/media/v4l-drivers/cx2341x.rst
+		 * Documentation/driver-api/media/drivers/cx2341x-devel.rst
 		 */
 		if (atomic_read(&cx->ana_capturing) == 0)
 			cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
@@ -853,7 +853,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
 
 		/*
 		 * Number of lines for Field 1 & Field 2 according to
-		 * Documentation/media/v4l-drivers/cx2341x.rst
+		 * Documentation/driver-api/media/drivers/cx2341x-devel.rst
 		 * Field 1 is 312 for 625 line systems in BT.656
 		 * Field 2 is 313 for 625 line systems in BT.656
 		 */
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 8e5a2c580821..570a4a09c387 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -703,8 +703,19 @@ struct cx23885_board cx23885_boards[] = {
 	},
 	[CX23885_BOARD_HAUPPAUGE_HVR5525] = {
 		.name		= "Hauppauge WinTV-HVR5525",
+		.porta		= CX23885_ANALOG_VIDEO,
 		.portb		= CX23885_MPEG_DVB,
 		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.force_bff	= 1,
+		.input		= {{
+			.type	= CX23885_VMUX_TELEVISION,
+			.vmux	=	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		} },
 	},
 	[CX23885_BOARD_VIEWCAST_260E] = {
 		.name		= "ViewCast 260e",
@@ -757,32 +768,61 @@ struct cx23885_board cx23885_boards[] = {
 		} },
 	},
 	[CX23885_BOARD_HAUPPAUGE_QUADHD_DVB] = {
-		.name        = "Hauppauge WinTV-QuadHD-DVB",
+		.name         = "Hauppauge WinTV-QuadHD-DVB",
+		.porta        = CX23885_ANALOG_VIDEO,
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		} },
 	},
 	[CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885] = {
-		.name       = "Hauppauge WinTV-QuadHD-DVB(885)",
+		.name         = "Hauppauge WinTV-QuadHD-DVB(885)",
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
+		.tuner_type   = TUNER_ABSENT,
 	},
 	[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC] = {
-		.name        = "Hauppauge WinTV-QuadHD-ATSC",
+		.name         = "Hauppauge WinTV-QuadHD-ATSC",
+		.porta        = CX23885_ANALOG_VIDEO,
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		} },
 	},
 	[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885] = {
-		.name       = "Hauppauge WinTV-QuadHD-ATSC(885)",
+		.name         = "Hauppauge WinTV-QuadHD-ATSC(885)",
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
+		.tuner_type   = TUNER_ABSENT,
 	},
 	[CX23885_BOARD_HAUPPAUGE_HVR1265_K4] = {
 		.name		= "Hauppauge WinTV-HVR-1265(161111)",
 		.porta          = CX23885_ANALOG_VIDEO,
 		.portc		= CX23885_MPEG_DVB,
 		.tuner_type     = TUNER_ABSENT,
-		.force_bff	= 1,
 		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		}, {
 			.type   = CX23885_VMUX_COMPOSITE1,
 			.vmux   =	CX25840_VIN7_CH3 |
 					CX25840_VIN4_CH2 |
@@ -2350,6 +2390,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
 	case CX23885_BOARD_MYGICA_X8506:
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 494751a067a3..45c2f4afceb8 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -2314,6 +2314,12 @@ static int dvb_register(struct cx23885_tsport *port)
 				goto frontend_detach;
 			}
 			port->i2c_client_tuner = client_tuner;
+
+			dev->ts1.analog_fe.tuner_priv = client_tuner;
+			memcpy(&dev->ts1.analog_fe.ops.tuner_ops,
+			       &fe0->dvb.frontend->ops.tuner_ops,
+			       sizeof(struct dvb_tuner_ops));
+
 			break;
 		}
 		break;
@@ -2367,6 +2373,16 @@ static int dvb_register(struct cx23885_tsport *port)
 				goto frontend_detach;
 			}
 			port->i2c_client_tuner = client_tuner;
+
+			/* we only attach tuner for analog on the 888 version */
+			if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB) {
+				pr_info("%s(): QUADHD_DVB analog setup\n",
+					__func__);
+				dev->ts1.analog_fe.tuner_priv = client_tuner;
+				memcpy(&dev->ts1.analog_fe.ops.tuner_ops,
+				       &fe0->dvb.frontend->ops.tuner_ops,
+				       sizeof(struct dvb_tuner_ops));
+			}
 			break;
 
 		/* port c - terrestrial/cable */
@@ -2456,6 +2472,16 @@ static int dvb_register(struct cx23885_tsport *port)
 				goto frontend_detach;
 			}
 			port->i2c_client_tuner = client_tuner;
+
+			/* we only attach tuner for analog on the 888 version */
+			if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC) {
+				pr_info("%s(): QUADHD_ATSC analog setup\n",
+					__func__);
+				dev->ts1.analog_fe.tuner_priv = client_tuner;
+				memcpy(&dev->ts1.analog_fe.ops.tuner_ops,
+				       &fe0->dvb.frontend->ops.tuner_ops,
+				       sizeof(struct dvb_tuner_ops));
+			}
 			break;
 
 		/* port c - terrestrial/cable */
@@ -2527,6 +2553,11 @@ static int dvb_register(struct cx23885_tsport *port)
 				goto frontend_detach;
 			}
 			port->i2c_client_tuner = client_tuner;
+
+			dev->ts1.analog_fe.tuner_priv = client_tuner;
+			memcpy(&dev->ts1.analog_fe.ops.tuner_ops,
+			       &fe0->dvb.frontend->ops.tuner_ops,
+			       sizeof(struct dvb_tuner_ops));
 			break;
 		}
 		break;
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
index 000c108b94fd..440d108b7ddd 100644
--- a/drivers/media/pci/cx23885/cx23885-video.c
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -253,7 +253,10 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1265_K4) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB) ||
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR5525) ||
 		(dev->board == CX23885_BOARD_MYGICA_X8507) ||
 		(dev->board == CX23885_BOARD_AVERMEDIA_HC81R) ||
 		(dev->board == CX23885_BOARD_VIEWCAST_260E) ||
@@ -636,8 +639,18 @@ static int vidioc_querycap(struct file *file, void  *priv,
 			    V4L2_CAP_AUDIO | V4L2_CAP_VBI_CAPTURE |
 			    V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VBI_CAPTURE |
 			    V4L2_CAP_DEVICE_CAPS;
-	if (dev->tuner_type != TUNER_ABSENT)
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		cap->capabilities |= V4L2_CAP_TUNER;
+		break;
+	default:
+		if (dev->tuner_type != TUNER_ABSENT)
+			cap->capabilities |= V4L2_CAP_TUNER;
+		break;
+	}
 	return 0;
 }
 
@@ -883,8 +896,17 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 {
 	struct cx23885_dev *dev = video_drvdata(file);
 
-	if (dev->tuner_type == TUNER_ABSENT)
-		return -EINVAL;
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		break;
+	default:
+		if (dev->tuner_type == TUNER_ABSENT)
+			return -EINVAL;
+		break;
+	}
 	if (0 != t->index)
 		return -EINVAL;
 
@@ -899,8 +921,17 @@ static int vidioc_s_tuner(struct file *file, void *priv,
 {
 	struct cx23885_dev *dev = video_drvdata(file);
 
-	if (dev->tuner_type == TUNER_ABSENT)
-		return -EINVAL;
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		break;
+	default:
+		if (dev->tuner_type == TUNER_ABSENT)
+			return -EINVAL;
+		break;
+	}
 	if (0 != t->index)
 		return -EINVAL;
 	/* Update the A/V core */
@@ -914,9 +945,17 @@ static int vidioc_g_frequency(struct file *file, void *priv,
 {
 	struct cx23885_dev *dev = video_drvdata(file);
 
-	if (dev->tuner_type == TUNER_ABSENT)
-		return -EINVAL;
-
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		break;
+	default:
+		if (dev->tuner_type == TUNER_ABSENT)
+			return -EINVAL;
+		break;
+	}
 	f->type = V4L2_TUNER_ANALOG_TV;
 	f->frequency = dev->freq;
 
@@ -930,8 +969,17 @@ static int cx23885_set_freq(struct cx23885_dev *dev, const struct v4l2_frequency
 	struct v4l2_ctrl *mute;
 	int old_mute_val = 1;
 
-	if (dev->tuner_type == TUNER_ABSENT)
-		return -EINVAL;
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		break;
+	default:
+		if (dev->tuner_type == TUNER_ABSENT)
+			return -EINVAL;
+		break;
+	}
 	if (unlikely(f->tuner != 0))
 		return -EINVAL;
 
@@ -996,7 +1044,10 @@ static int cx23885_set_freq_via_ops(struct cx23885_dev *dev,
 	if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
 	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
 	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
-	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1265_K4))
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1265_K4) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR5525) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC))
 		fe = &dev->ts1.analog_fe;
 
 	if (fe && fe->ops.tuner_ops.set_analog_params) {
@@ -1027,6 +1078,9 @@ int cx23885_set_frequency(struct file *file, void *priv,
 	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		ret = cx23885_set_freq_via_ops(dev, f);
 		break;
 	default:
@@ -1302,8 +1356,18 @@ int cx23885_video_register(struct cx23885_dev *dev)
 	dev->video_dev->queue = &dev->vb2_vidq;
 	dev->video_dev->device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
 				      V4L2_CAP_AUDIO | V4L2_CAP_VIDEO_CAPTURE;
-	if (dev->tuner_type != TUNER_ABSENT)
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		dev->video_dev->device_caps |= V4L2_CAP_TUNER;
+		break;
+	default:
+		if (dev->tuner_type != TUNER_ABSENT)
+			dev->video_dev->device_caps |= V4L2_CAP_TUNER;
+	}
+
 	err = video_register_device(dev->video_dev, VFL_TYPE_VIDEO,
 				    video_nr[dev->nr]);
 	if (err < 0) {
@@ -1320,8 +1384,17 @@ int cx23885_video_register(struct cx23885_dev *dev)
 	dev->vbi_dev->queue = &dev->vb2_vbiq;
 	dev->vbi_dev->device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
 				    V4L2_CAP_AUDIO | V4L2_CAP_VBI_CAPTURE;
-	if (dev->tuner_type != TUNER_ABSENT)
+	switch (dev->board) { /* i2c device tuners */
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		dev->vbi_dev->device_caps |= V4L2_CAP_TUNER;
+		break;
+	default:
+		if (dev->tuner_type != TUNER_ABSENT)
+			dev->vbi_dev->device_caps |= V4L2_CAP_TUNER;
+	}
 	err = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
 				    vbi_nr[dev->nr]);
 	if (err < 0) {
diff --git a/drivers/media/pci/cx88/cx88-core.c b/drivers/media/pci/cx88/cx88-core.c
index dcadf78657d6..48c8a3429542 100644
--- a/drivers/media/pci/cx88/cx88-core.c
+++ b/drivers/media/pci/cx88/cx88-core.c
@@ -1070,8 +1070,7 @@ void cx88_core_put(struct cx88_core *core, struct pci_dev *pci)
 	mutex_lock(&devlist);
 	cx88_ir_fini(core);
 	if (core->i2c_rc == 0) {
-		if (core->i2c_rtc)
-			i2c_unregister_device(core->i2c_rtc);
+		i2c_unregister_device(core->i2c_rtc);
 		i2c_del_adapter(&core->i2c_adap);
 	}
 	list_del(&core->devlist);
diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c
index c7c2acd55266..7e0fed9cd200 100644
--- a/drivers/media/pci/cx88/cx88-input.c
+++ b/drivers/media/pci/cx88/cx88-input.c
@@ -638,7 +638,7 @@ void cx88_i2c_init_ir(struct cx88_core *core)
 				   I2C_SMBUS_READ, 0,
 				   I2C_SMBUS_QUICK, NULL) >= 0) {
 			info.addr = *addrp;
-			i2c_new_device(&core->i2c_adap, &info);
+			i2c_new_client_device(&core->i2c_adap, &info);
 			break;
 		}
 	}
diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c
index 6aabc45aa93c..ba0e9660a047 100644
--- a/drivers/media/pci/cx88/cx88-video.c
+++ b/drivers/media/pci/cx88/cx88-video.c
@@ -1385,7 +1385,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
 		};
 
 		request_module("rtc-isl1208");
-		core->i2c_rtc = i2c_new_device(&core->i2c_adap, &rtc_info);
+		core->i2c_rtc = i2c_new_client_device(&core->i2c_adap, &rtc_info);
 	}
 		/* fall-through */
 	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
diff --git a/drivers/media/pci/ddbridge/Kconfig b/drivers/media/pci/ddbridge/Kconfig
index dab34fb85c09..169efd558e45 100644
--- a/drivers/media/pci/ddbridge/Kconfig
+++ b/drivers/media/pci/ddbridge/Kconfig
@@ -15,7 +15,6 @@ config DVB_DDBRIDGE
 	select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_MXL5XX if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT
-	select DVB_DUMMY_FE if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for cards with the Digital Devices PCI express bridge:
 	  - Octopus PCIe Bridge
diff --git a/drivers/media/pci/ddbridge/Makefile b/drivers/media/pci/ddbridge/Makefile
index 2b77c8d0eb2e..5e7eab81173b 100644
--- a/drivers/media/pci/ddbridge/Makefile
+++ b/drivers/media/pci/ddbridge/Makefile
@@ -7,7 +7,7 @@ ddbridge-objs := ddbridge-main.o ddbridge-core.o ddbridge-ci.o \
 		ddbridge-hw.o ddbridge-i2c.o ddbridge-max.o ddbridge-mci.o \
 		ddbridge-sx8.o
 
-obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o
+obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o ddbridge-dummy-fe.o
 
 ccflags-y += -I $(srctree)/drivers/media/dvb-frontends/
 ccflags-y += -I $(srctree)/drivers/media/tuners/
diff --git a/drivers/media/pci/ddbridge/ddbridge-core.c b/drivers/media/pci/ddbridge/ddbridge-core.c
index 7a2d19682fe3..7cabb9e9ffe2 100644
--- a/drivers/media/pci/ddbridge/ddbridge-core.c
+++ b/drivers/media/pci/ddbridge/ddbridge-core.c
@@ -50,7 +50,7 @@
 #include "stv6111.h"
 #include "lnbh25.h"
 #include "cxd2099.h"
-#include "dvb_dummy_fe.h"
+#include "ddbridge-dummy-fe.h"
 
 /****************************************************************************/
 
@@ -1265,7 +1265,7 @@ static int demod_attach_dummy(struct ddb_input *input)
 	struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1];
 	struct device *dev = input->port->dev->dev;
 
-	dvb->fe = dvb_attach(dvb_dummy_fe_qam_attach);
+	dvb->fe = dvb_attach(ddbridge_dummy_fe_qam_attach);
 	if (!dvb->fe) {
 		dev_err(dev, "QAM dummy attach failed!\n");
 		return -ENODEV;
diff --git a/drivers/media/pci/ddbridge/ddbridge-dummy-fe.c b/drivers/media/pci/ddbridge/ddbridge-dummy-fe.c
new file mode 100644
index 000000000000..6868a0c4fc82
--- /dev/null
+++ b/drivers/media/pci/ddbridge/ddbridge-dummy-fe.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for Dummy Frontend
+ *
+ *  Written by Emard <emard@softhome.net>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include <media/dvb_frontend.h>
+#include "ddbridge-dummy-fe.h"
+
+struct ddbridge_dummy_fe_state {
+	struct dvb_frontend frontend;
+};
+
+static int ddbridge_dummy_fe_read_status(struct dvb_frontend *fe,
+				    enum fe_status *status)
+{
+	*status = FE_HAS_SIGNAL
+		| FE_HAS_CARRIER
+		| FE_HAS_VITERBI
+		| FE_HAS_SYNC
+		| FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int ddbridge_dummy_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	*ber = 0;
+	return 0;
+}
+
+static int ddbridge_dummy_fe_read_signal_strength(struct dvb_frontend *fe,
+					     u16 *strength)
+{
+	*strength = 0;
+	return 0;
+}
+
+static int ddbridge_dummy_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	*snr = 0;
+	return 0;
+}
+
+static int ddbridge_dummy_fe_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	*ucblocks = 0;
+	return 0;
+}
+
+/*
+ * Should only be implemented if it actually reads something from the hardware.
+ * Also, it should check for the locks, in order to avoid report wrong data
+ * to userspace.
+ */
+static int ddbridge_dummy_fe_get_frontend(struct dvb_frontend *fe,
+				     struct dtv_frontend_properties *p)
+{
+	return 0;
+}
+
+static int ddbridge_dummy_fe_set_frontend(struct dvb_frontend *fe)
+{
+	if (fe->ops.tuner_ops.set_params) {
+		fe->ops.tuner_ops.set_params(fe);
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 0);
+	}
+
+	return 0;
+}
+
+static int ddbridge_dummy_fe_sleep(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static int ddbridge_dummy_fe_init(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static void ddbridge_dummy_fe_release(struct dvb_frontend *fe)
+{
+	struct ddbridge_dummy_fe_state *state = fe->demodulator_priv;
+
+	kfree(state);
+}
+
+static const struct dvb_frontend_ops ddbridge_dummy_fe_qam_ops;
+
+struct dvb_frontend *ddbridge_dummy_fe_qam_attach(void)
+{
+	struct ddbridge_dummy_fe_state *state = NULL;
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct ddbridge_dummy_fe_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops,
+	       &ddbridge_dummy_fe_qam_ops,
+	       sizeof(struct dvb_frontend_ops));
+
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+}
+EXPORT_SYMBOL(ddbridge_dummy_fe_qam_attach);
+
+static const struct dvb_frontend_ops ddbridge_dummy_fe_qam_ops = {
+	.delsys = { SYS_DVBC_ANNEX_A },
+	.info = {
+		.name			= "ddbridge dummy DVB-C",
+		.frequency_min_hz	=  51 * MHz,
+		.frequency_max_hz	= 858 * MHz,
+		.frequency_stepsize_hz	= 62500,
+		/* symbol_rate_min: SACLK/64 == (XIN/2)/64 */
+		.symbol_rate_min	= (57840000 / 2) / 64,
+		.symbol_rate_max	= (57840000 / 2) / 4,   /* SACLK/4 */
+		.caps = FE_CAN_QAM_16 |
+			FE_CAN_QAM_32 |
+			FE_CAN_QAM_64 |
+			FE_CAN_QAM_128 |
+			FE_CAN_QAM_256 |
+			FE_CAN_FEC_AUTO |
+			FE_CAN_INVERSION_AUTO
+	},
+
+	.release = ddbridge_dummy_fe_release,
+
+	.init = ddbridge_dummy_fe_init,
+	.sleep = ddbridge_dummy_fe_sleep,
+
+	.set_frontend = ddbridge_dummy_fe_set_frontend,
+	.get_frontend = ddbridge_dummy_fe_get_frontend,
+
+	.read_status = ddbridge_dummy_fe_read_status,
+	.read_ber = ddbridge_dummy_fe_read_ber,
+	.read_signal_strength = ddbridge_dummy_fe_read_signal_strength,
+	.read_snr = ddbridge_dummy_fe_read_snr,
+	.read_ucblocks = ddbridge_dummy_fe_read_ucblocks,
+};
+
+MODULE_DESCRIPTION("ddbridge dummy Frontend");
+MODULE_AUTHOR("Emard");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/ddbridge/ddbridge-dummy-fe.h b/drivers/media/pci/ddbridge/ddbridge-dummy-fe.h
new file mode 100644
index 000000000000..ddf189c09524
--- /dev/null
+++ b/drivers/media/pci/ddbridge/ddbridge-dummy-fe.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for Dummy Frontend
+ *
+ *  Written by Emard <emard@softhome.net>
+ */
+
+#ifndef DDBRIDGE_DUMMY_FE_H
+#define DDBRIDGE_DUMMY_FE_H
+
+#include <linux/dvb/frontend.h>
+#include <media/dvb_frontend.h>
+
+struct dvb_frontend *ddbridge_dummy_fe_qam_attach(void);
+
+#endif // DDBRIDGE_DUMMY_FE_H
diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig
index f35bba16b60e..82d7f17e6a02 100644
--- a/drivers/media/pci/intel/ipu3/Kconfig
+++ b/drivers/media/pci/intel/ipu3/Kconfig
@@ -2,9 +2,9 @@
 config VIDEO_IPU3_CIO2
 	tristate "Intel ipu3-cio2 driver"
 	depends on VIDEO_V4L2 && PCI
-	depends on VIDEO_V4L2_SUBDEV_API
 	depends on (X86 && ACPI) || COMPILE_TEST
-	depends on MEDIA_CONTROLLER
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	select VIDEOBUF2_DMA_SG
 
diff --git a/drivers/media/pci/meye/Kconfig b/drivers/media/pci/meye/Kconfig
index b37da612dd0c..fed1f4a01817 100644
--- a/drivers/media/pci/meye/Kconfig
+++ b/drivers/media/pci/meye/Kconfig
@@ -7,7 +7,7 @@ config VIDEO_MEYE
 	help
 	  This is the video4linux driver for the Motion Eye camera found
 	  in the Vaio Picturebook laptops. Please read the material in
-	  <file:Documentation/media/v4l-drivers/meye.rst> for more information.
+	  <file:Documentation/admin-guide/media/meye.rst> for more information.
 
 	  If you say Y or M here, you need to say Y or M to "Sony Laptop
 	  Extras" in the misc device section.
diff --git a/drivers/media/pci/saa7134/saa7134-input.c b/drivers/media/pci/saa7134/saa7134-input.c
index 9aea7c30380b..8610eb473b39 100644
--- a/drivers/media/pci/saa7134/saa7134-input.c
+++ b/drivers/media/pci/saa7134/saa7134-input.c
@@ -982,7 +982,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 
 	if (dev->init_data.name)
 		info.platform_data = &dev->init_data;
-	i2c_new_device(&dev->i2c_adap, &info);
+	i2c_new_client_device(&dev->i2c_adap, &info);
 }
 
 static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
diff --git a/drivers/media/pci/sta2x11/Kconfig b/drivers/media/pci/sta2x11/Kconfig
index 011b766f0bff..4dd98f94a91e 100644
--- a/drivers/media/pci/sta2x11/Kconfig
+++ b/drivers/media/pci/sta2x11/Kconfig
@@ -1,12 +1,12 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config STA2X11_VIP
 	tristate "STA2X11 VIP Video For Linux"
+	depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS && I2C
 	depends on STA2X11 || COMPILE_TEST
 	select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEOBUF2_DMA_CONTIG
-	depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS
-	depends on VIDEO_V4L2_SUBDEV_API
-	depends on I2C
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  Say Y for support for STA2X11 VIP (Video Input Port) capture
 	  device.
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index e01bbb9dd1c1..8110373fb0e9 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -5,7 +5,6 @@
 
 menuconfig V4L_PLATFORM_DRIVERS
 	bool "V4L platform devices"
-	depends on MEDIA_CAMERA_SUPPORT
 	help
 	  Say Y here to enable support for platform-specific V4L drivers.
 
@@ -15,7 +14,7 @@ source "drivers/media/platform/marvell-ccic/Kconfig"
 
 config VIDEO_VIA_CAMERA
 	tristate "VIAFB camera controller support"
-	depends on FB_VIA
+	depends on FB_VIA && VIDEO_V4L2
 	select VIDEOBUF2_DMA_SG
 	select VIDEO_OV7670
 	help
@@ -43,7 +42,6 @@ config VIDEO_ASPEED
 
 config VIDEO_SH_VOU
 	tristate "SuperH VOU video output driver"
-	depends on MEDIA_CAMERA_SUPPORT
 	depends on VIDEO_DEV && I2C
 	depends on ARCH_SHMOBILE || COMPILE_TEST
 	select VIDEOBUF2_DMA_CONTIG
@@ -65,7 +63,9 @@ config VIDEO_VIU
 config VIDEO_MUX
 	tristate "Video Multiplexer"
 	select MULTIPLEXER
-	depends on VIDEO_V4L2 && OF && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER
+	depends on VIDEO_V4L2 && OF
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select REGMAP
 	select V4L2_FWNODE
 	help
@@ -73,10 +73,12 @@ config VIDEO_MUX
 
 config VIDEO_OMAP3
 	tristate "OMAP 3 Camera support"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && I2C
 	depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST
 	depends on COMMON_CLK && OF
 	select ARM_DMA_USE_IOMMU if OMAP_IOMMU
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	select MFD_SYSCON
 	select V4L2_FWNODE
@@ -101,16 +103,19 @@ config VIDEO_PXA27x
 
 config VIDEO_QCOM_CAMSS
 	tristate "Qualcomm V4L2 Camera Subsystem driver"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2
 	depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_SG
 	select V4L2_FWNODE
 
 config VIDEO_S3C_CAMIF
 	tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
-	depends on PM
+	depends on VIDEO_V4L2 && I2C && PM
 	depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	help
 	  This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
@@ -121,9 +126,10 @@ config VIDEO_S3C_CAMIF
 
 config VIDEO_STM32_DCMI
 	tristate "STM32 Digital Camera Memory Interface (DCMI) support"
-	depends on VIDEO_V4L2 && OF && MEDIA_CONTROLLER
+	depends on VIDEO_V4L2 && OF
 	depends on ARCH_STM32 || COMPILE_TEST
 	select VIDEOBUF2_DMA_CONTIG
+	select MEDIA_CONTROLLER
 	select V4L2_FWNODE
 	help
 	  This module makes the STM32 Digital Camera Memory Interface (DCMI)
@@ -150,7 +156,9 @@ source "drivers/media/platform/sunxi/Kconfig"
 
 config VIDEO_TI_CAL
 	tristate "TI CAL (Camera Adaptation Layer) driver"
-	depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_DEV && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_FWNODE
@@ -165,7 +173,6 @@ endif # V4L_PLATFORM_DRIVERS
 menuconfig V4L_MEM2MEM_DRIVERS
 	bool "Memory-to-memory multimedia devices"
 	depends on VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT
 	help
 	  Say Y here to enable selecting drivers for V4L devices that
 	  use system memory for both source and destination buffers, as opposed
@@ -180,6 +187,7 @@ config VIDEO_CODA
 	select SRAM
 	select VIDEOBUF2_DMA_CONTIG
 	select VIDEOBUF2_VMALLOC
+	select V4L2_JPEG_HELPER
 	select V4L2_MEM2MEM_DEV
 	select GENERIC_ALLOCATOR
 	help
@@ -435,9 +443,11 @@ config VIDEO_RENESAS_FCP
 
 config VIDEO_RENESAS_VSP1
 	tristate "Renesas VSP1 Video Processing Engine"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2
 	depends on ARCH_RENESAS || COMPILE_TEST
 	depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	select VIDEOBUF2_VMALLOC
 	help
@@ -532,29 +542,6 @@ config VIDEO_TI_SC
 config VIDEO_TI_CSC
 	tristate
 
-menuconfig V4L_TEST_DRIVERS
-	bool "Media test drivers"
-	depends on MEDIA_CAMERA_SUPPORT
-
-if V4L_TEST_DRIVERS
-
-source "drivers/media/platform/vimc/Kconfig"
-
-source "drivers/media/platform/vivid/Kconfig"
-
-config VIDEO_VIM2M
-	tristate "Virtual Memory-to-Memory Driver"
-	depends on VIDEO_DEV && VIDEO_V4L2
-	select VIDEOBUF2_VMALLOC
-	select V4L2_MEM2MEM_DEV
-	help
-	  This is a virtual test device for the memory-to-memory driver
-	  framework.
-
-source "drivers/media/platform/vicodec/Kconfig"
-
-endif #V4L_TEST_DRIVERS
-
 menuconfig DVB_PLATFORM_DRIVERS
 	bool "DVB platform devices"
 	depends on MEDIA_DIGITAL_TV_SUPPORT
@@ -565,131 +552,6 @@ if DVB_PLATFORM_DRIVERS
 source "drivers/media/platform/sti/c8sectpfe/Kconfig"
 endif #DVB_PLATFORM_DRIVERS
 
-menuconfig CEC_PLATFORM_DRIVERS
-	bool "CEC platform devices"
-	depends on MEDIA_CEC_SUPPORT
-
-if CEC_PLATFORM_DRIVERS
-
-config VIDEO_CROS_EC_CEC
-	tristate "ChromeOS EC CEC driver"
-	depends on CROS_EC
-	select CEC_CORE
-	select CEC_NOTIFIER
-	select CROS_EC_PROTO
-	help
-	  If you say yes here you will get support for the
-	  ChromeOS Embedded Controller's CEC.
-	  The CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_MESON_AO_CEC
-	tristate "Amlogic Meson AO CEC driver"
-	depends on ARCH_MESON || COMPILE_TEST
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for Amlogic Meson SoCs AO CEC interface. It uses the
-	  generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-
-config VIDEO_MESON_G12A_AO_CEC
-	tristate "Amlogic Meson G12A AO CEC driver"
-	depends on ARCH_MESON || COMPILE_TEST
-	depends on COMMON_CLK && OF
-	select REGMAP
-	select REGMAP_MMIO
-	select CEC_CORE
-	select CEC_NOTIFIER
-	---help---
-	  This is a driver for Amlogic Meson G12A SoCs AO CEC interface.
-	  This driver if for the new AO-CEC module found in G12A SoCs,
-	  usually named AO_CEC_B in documentation.
-	  It uses the generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config CEC_GPIO
-	tristate "Generic GPIO-based CEC driver"
-	depends on PREEMPTION || COMPILE_TEST
-	select CEC_CORE
-	select CEC_PIN
-	select CEC_NOTIFIER
-	select GPIOLIB
-	help
-	  This is a generic GPIO-based CEC driver.
-	  The CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_SAMSUNG_S5P_CEC
-	tristate "Samsung S5P CEC driver"
-	depends on ARCH_EXYNOS || COMPILE_TEST
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for Samsung S5P HDMI CEC interface. It uses the
-	  generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_STI_HDMI_CEC
-	tristate "STMicroelectronics STiH4xx HDMI CEC driver"
-	depends on ARCH_STI || COMPILE_TEST
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for STIH4xx HDMI CEC interface. It uses the
-	  generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_STM32_HDMI_CEC
-	tristate "STMicroelectronics STM32 HDMI CEC driver"
-	depends on ARCH_STM32 || COMPILE_TEST
-	select REGMAP
-	select REGMAP_MMIO
-	select CEC_CORE
-	help
-	  This is a driver for STM32 interface. It uses the
-	  generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_TEGRA_HDMI_CEC
-	tristate "Tegra HDMI CEC driver"
-	depends on ARCH_TEGRA || COMPILE_TEST
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for the Tegra HDMI CEC interface. It uses the
-	  generic CEC framework interface.
-	  The CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_SECO_CEC
-	tristate "SECO Boards HDMI CEC driver"
-	depends on (X86 || IA64) || COMPILE_TEST
-	depends on PCI && DMI
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for SECO Boards integrated CEC interface.
-	  Selecting it will enable support for this device.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_SECO_RC
-	bool "SECO Boards IR RC5 support"
-	depends on VIDEO_SECO_CEC
-	depends on RC_CORE=y || RC_CORE = VIDEO_SECO_CEC
-	help
-	  If you say yes here you will get support for the
-	  SECO Boards Consumer-IR in seco-cec driver.
-	  The embedded controller supports RC5 protocol only, default mapping
-	  is set to rc-hauppauge.
-
-endif #CEC_PLATFORM_DRIVERS
-
 menuconfig SDR_PLATFORM_DRIVERS
 	bool "SDR platform devices"
 	depends on MEDIA_SDR_SUPPORT
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index d13db96e3015..ac31d4748869 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -14,11 +14,6 @@ obj-$(CONFIG_VIDEO_PXA27x)	+= pxa_camera.o
 
 obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o
 
-obj-$(CONFIG_VIDEO_VIMC)		+= vimc/
-obj-$(CONFIG_VIDEO_VIVID)		+= vivid/
-obj-$(CONFIG_VIDEO_VIM2M)		+= vim2m.o
-obj-$(CONFIG_VIDEO_VICODEC)		+= vicodec/
-
 obj-y	+= ti-vpe/
 
 obj-$(CONFIG_VIDEO_MX2_EMMAPRP)		+= mx2_emmaprp.o
@@ -28,8 +23,6 @@ obj-$(CONFIG_VIDEO_IMX_PXP)		+= imx-pxp.o
 
 obj-$(CONFIG_VIDEO_SH_VEU)		+= sh_veu.o
 
-obj-$(CONFIG_CEC_GPIO)			+= cec-gpio/
-
 obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE)	+= m2m-deinterlace.o
 
 obj-$(CONFIG_VIDEO_MUX)			+= video-mux.o
@@ -40,22 +33,16 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG)	+= s5p-jpeg/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC)	+= s5p-mfc/
 
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D)	+= s5p-g2d/
-obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC)	+= s5p-cec/
 obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC)	+= exynos-gsc/
 
 obj-$(CONFIG_VIDEO_STI_BDISP)		+= sti/bdisp/
 obj-$(CONFIG_VIDEO_STI_HVA)		+= sti/hva/
 obj-$(CONFIG_DVB_C8SECTPFE)		+= sti/c8sectpfe/
-obj-$(CONFIG_VIDEO_STI_HDMI_CEC)	+= sti/cec/
 
 obj-$(CONFIG_VIDEO_STI_DELTA)		+= sti/delta/
 
-obj-$(CONFIG_VIDEO_TEGRA_HDMI_CEC)	+= tegra-cec/
-
 obj-y					+= stm32/
 
-obj-$(CONFIG_VIDEO_SECO_CEC)		+= seco-cec/
-
 obj-y					+= davinci/
 
 obj-$(CONFIG_VIDEO_SH_VOU)		+= sh_vou.o
@@ -94,8 +81,4 @@ obj-$(CONFIG_VIDEO_QCOM_CAMSS)		+= qcom/camss/
 
 obj-$(CONFIG_VIDEO_QCOM_VENUS)		+= qcom/venus/
 
-obj-y					+= meson/
-
-obj-y					+= cros-ec-cec/
-
 obj-y					+= sunxi/
diff --git a/drivers/media/platform/am437x/Kconfig b/drivers/media/platform/am437x/Kconfig
index d6f2e3d0cbef..9ef898f512de 100644
--- a/drivers/media/platform/am437x/Kconfig
+++ b/drivers/media/platform/am437x/Kconfig
@@ -1,8 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config VIDEO_AM437X_VPFE
 	tristate "TI AM437x VPFE video capture driver"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2
 	depends on SOC_AM43XX || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_FWNODE
 	help
diff --git a/drivers/media/platform/atmel/Kconfig b/drivers/media/platform/atmel/Kconfig
index 5ae3f60b81b1..1850fe7f9360 100644
--- a/drivers/media/platform/atmel/Kconfig
+++ b/drivers/media/platform/atmel/Kconfig
@@ -1,8 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config VIDEO_ATMEL_ISC
 	tristate "ATMEL Image Sensor Controller (ISC) support"
-	depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && COMMON_CLK
 	depends on ARCH_AT91 || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	select REGMAP_MMIO
 	select V4L2_FWNODE
diff --git a/drivers/media/platform/cadence/Kconfig b/drivers/media/platform/cadence/Kconfig
index c154e368d701..80cf601323ce 100644
--- a/drivers/media/platform/cadence/Kconfig
+++ b/drivers/media/platform/cadence/Kconfig
@@ -13,8 +13,8 @@ if VIDEO_CADENCE
 config VIDEO_CADENCE_CSI2RX
 	tristate "Cadence MIPI-CSI2 RX Controller"
 	depends on VIDEO_V4L2
-	depends on MEDIA_CONTROLLER
-	depends on VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  Support for the Cadence MIPI CSI2 Receiver controller.
@@ -25,8 +25,8 @@ config VIDEO_CADENCE_CSI2RX
 config VIDEO_CADENCE_CSI2TX
 	tristate "Cadence MIPI-CSI2 TX Controller"
 	depends on VIDEO_V4L2
-	depends on MEDIA_CONTROLLER
-	depends on VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  Support for the Cadence MIPI CSI2 Transceiver controller.
diff --git a/drivers/media/platform/cec-gpio/Makefile b/drivers/media/platform/cec-gpio/Makefile
deleted file mode 100644
index a40c621dbd24..000000000000
--- a/drivers/media/platform/cec-gpio/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_CEC_GPIO) += cec-gpio.o
diff --git a/drivers/media/platform/cec-gpio/cec-gpio.c b/drivers/media/platform/cec-gpio/cec-gpio.c
deleted file mode 100644
index 42d2c2cd9a78..000000000000
--- a/drivers/media/platform/cec-gpio/cec-gpio.c
+++ /dev/null
@@ -1,298 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <media/cec-notifier.h>
-#include <media/cec-pin.h>
-
-struct cec_gpio {
-	struct cec_adapter	*adap;
-	struct cec_notifier	*notifier;
-	struct device		*dev;
-
-	struct gpio_desc	*cec_gpio;
-	int			cec_irq;
-	bool			cec_is_low;
-
-	struct gpio_desc	*hpd_gpio;
-	int			hpd_irq;
-	bool			hpd_is_high;
-	ktime_t			hpd_ts;
-
-	struct gpio_desc	*v5_gpio;
-	int			v5_irq;
-	bool			v5_is_high;
-	ktime_t			v5_ts;
-};
-
-static bool cec_gpio_read(struct cec_adapter *adap)
-{
-	struct cec_gpio *cec = cec_get_drvdata(adap);
-
-	if (cec->cec_is_low)
-		return false;
-	return gpiod_get_value(cec->cec_gpio);
-}
-
-static void cec_gpio_high(struct cec_adapter *adap)
-{
-	struct cec_gpio *cec = cec_get_drvdata(adap);
-
-	if (!cec->cec_is_low)
-		return;
-	cec->cec_is_low = false;
-	gpiod_set_value(cec->cec_gpio, 1);
-}
-
-static void cec_gpio_low(struct cec_adapter *adap)
-{
-	struct cec_gpio *cec = cec_get_drvdata(adap);
-
-	if (cec->cec_is_low)
-		return;
-	cec->cec_is_low = true;
-	gpiod_set_value(cec->cec_gpio, 0);
-}
-
-static irqreturn_t cec_hpd_gpio_irq_handler_thread(int irq, void *priv)
-{
-	struct cec_gpio *cec = priv;
-
-	cec_queue_pin_hpd_event(cec->adap, cec->hpd_is_high, cec->hpd_ts);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t cec_5v_gpio_irq_handler(int irq, void *priv)
-{
-	struct cec_gpio *cec = priv;
-	bool is_high = gpiod_get_value(cec->v5_gpio);
-
-	if (is_high == cec->v5_is_high)
-		return IRQ_HANDLED;
-	cec->v5_ts = ktime_get();
-	cec->v5_is_high = is_high;
-	return IRQ_WAKE_THREAD;
-}
-
-static irqreturn_t cec_5v_gpio_irq_handler_thread(int irq, void *priv)
-{
-	struct cec_gpio *cec = priv;
-
-	cec_queue_pin_5v_event(cec->adap, cec->v5_is_high, cec->v5_ts);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t cec_hpd_gpio_irq_handler(int irq, void *priv)
-{
-	struct cec_gpio *cec = priv;
-	bool is_high = gpiod_get_value(cec->hpd_gpio);
-
-	if (is_high == cec->hpd_is_high)
-		return IRQ_HANDLED;
-	cec->hpd_ts = ktime_get();
-	cec->hpd_is_high = is_high;
-	return IRQ_WAKE_THREAD;
-}
-
-static irqreturn_t cec_gpio_irq_handler(int irq, void *priv)
-{
-	struct cec_gpio *cec = priv;
-
-	cec_pin_changed(cec->adap, gpiod_get_value(cec->cec_gpio));
-	return IRQ_HANDLED;
-}
-
-static bool cec_gpio_enable_irq(struct cec_adapter *adap)
-{
-	struct cec_gpio *cec = cec_get_drvdata(adap);
-
-	enable_irq(cec->cec_irq);
-	return true;
-}
-
-static void cec_gpio_disable_irq(struct cec_adapter *adap)
-{
-	struct cec_gpio *cec = cec_get_drvdata(adap);
-
-	disable_irq(cec->cec_irq);
-}
-
-static void cec_gpio_status(struct cec_adapter *adap, struct seq_file *file)
-{
-	struct cec_gpio *cec = cec_get_drvdata(adap);
-
-	seq_printf(file, "mode: %s\n", cec->cec_is_low ? "low-drive" : "read");
-	seq_printf(file, "using irq: %d\n", cec->cec_irq);
-	if (cec->hpd_gpio)
-		seq_printf(file, "hpd: %s\n",
-			   cec->hpd_is_high ? "high" : "low");
-	if (cec->v5_gpio)
-		seq_printf(file, "5V: %s\n",
-			   cec->v5_is_high ? "high" : "low");
-}
-
-static int cec_gpio_read_hpd(struct cec_adapter *adap)
-{
-	struct cec_gpio *cec = cec_get_drvdata(adap);
-
-	if (!cec->hpd_gpio)
-		return -ENOTTY;
-	return gpiod_get_value(cec->hpd_gpio);
-}
-
-static int cec_gpio_read_5v(struct cec_adapter *adap)
-{
-	struct cec_gpio *cec = cec_get_drvdata(adap);
-
-	if (!cec->v5_gpio)
-		return -ENOTTY;
-	return gpiod_get_value(cec->v5_gpio);
-}
-
-static void cec_gpio_free(struct cec_adapter *adap)
-{
-	cec_gpio_disable_irq(adap);
-}
-
-static const struct cec_pin_ops cec_gpio_pin_ops = {
-	.read = cec_gpio_read,
-	.low = cec_gpio_low,
-	.high = cec_gpio_high,
-	.enable_irq = cec_gpio_enable_irq,
-	.disable_irq = cec_gpio_disable_irq,
-	.status = cec_gpio_status,
-	.free = cec_gpio_free,
-	.read_hpd = cec_gpio_read_hpd,
-	.read_5v = cec_gpio_read_5v,
-};
-
-static int cec_gpio_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device *hdmi_dev;
-	struct cec_gpio *cec;
-	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_MONITOR_ALL | CEC_CAP_MONITOR_PIN;
-	int ret;
-
-	hdmi_dev = cec_notifier_parse_hdmi_phandle(dev);
-	if (PTR_ERR(hdmi_dev) == -EPROBE_DEFER)
-		return PTR_ERR(hdmi_dev);
-	if (IS_ERR(hdmi_dev))
-		caps |= CEC_CAP_PHYS_ADDR;
-
-	cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL);
-	if (!cec)
-		return -ENOMEM;
-
-	cec->dev = dev;
-
-	cec->cec_gpio = devm_gpiod_get(dev, "cec", GPIOD_OUT_HIGH_OPEN_DRAIN);
-	if (IS_ERR(cec->cec_gpio))
-		return PTR_ERR(cec->cec_gpio);
-	cec->cec_irq = gpiod_to_irq(cec->cec_gpio);
-
-	cec->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
-	if (IS_ERR(cec->hpd_gpio))
-		return PTR_ERR(cec->hpd_gpio);
-
-	cec->v5_gpio = devm_gpiod_get_optional(dev, "v5", GPIOD_IN);
-	if (IS_ERR(cec->v5_gpio))
-		return PTR_ERR(cec->v5_gpio);
-
-	cec->adap = cec_pin_allocate_adapter(&cec_gpio_pin_ops,
-					     cec, pdev->name, caps);
-	if (IS_ERR(cec->adap))
-		return PTR_ERR(cec->adap);
-
-	ret = devm_request_irq(dev, cec->cec_irq, cec_gpio_irq_handler,
-			       IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			       cec->adap->name, cec);
-	if (ret)
-		goto del_adap;
-
-	cec_gpio_disable_irq(cec->adap);
-
-	if (cec->hpd_gpio) {
-		cec->hpd_irq = gpiod_to_irq(cec->hpd_gpio);
-		ret = devm_request_threaded_irq(dev, cec->hpd_irq,
-			cec_hpd_gpio_irq_handler,
-			cec_hpd_gpio_irq_handler_thread,
-			IRQF_ONESHOT |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"hpd-gpio", cec);
-		if (ret)
-			goto del_adap;
-	}
-
-	if (cec->v5_gpio) {
-		cec->v5_irq = gpiod_to_irq(cec->v5_gpio);
-		ret = devm_request_threaded_irq(dev, cec->v5_irq,
-			cec_5v_gpio_irq_handler,
-			cec_5v_gpio_irq_handler_thread,
-			IRQF_ONESHOT |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"v5-gpio", cec);
-		if (ret)
-			goto del_adap;
-	}
-
-	if (!IS_ERR(hdmi_dev)) {
-		cec->notifier = cec_notifier_cec_adap_register(hdmi_dev, NULL,
-							       cec->adap);
-		if (!cec->notifier) {
-			ret = -ENOMEM;
-			goto del_adap;
-		}
-	}
-
-	ret = cec_register_adapter(cec->adap, &pdev->dev);
-	if (ret)
-		goto unreg_notifier;
-
-	platform_set_drvdata(pdev, cec);
-	return 0;
-
-unreg_notifier:
-	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
-del_adap:
-	cec_delete_adapter(cec->adap);
-	return ret;
-}
-
-static int cec_gpio_remove(struct platform_device *pdev)
-{
-	struct cec_gpio *cec = platform_get_drvdata(pdev);
-
-	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
-	cec_unregister_adapter(cec->adap);
-	return 0;
-}
-
-static const struct of_device_id cec_gpio_match[] = {
-	{
-		.compatible	= "cec-gpio",
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, cec_gpio_match);
-
-static struct platform_driver cec_gpio_pdrv = {
-	.probe	= cec_gpio_probe,
-	.remove = cec_gpio_remove,
-	.driver = {
-		.name		= "cec-gpio",
-		.of_match_table	= cec_gpio_match,
-	},
-};
-
-module_platform_driver(cec_gpio_pdrv);
-
-MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("CEC GPIO driver");
diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c
index 3443396ba5f3..b021604eceaa 100644
--- a/drivers/media/platform/coda/coda-bit.c
+++ b/drivers/media/platform/coda/coda-bit.c
@@ -1215,7 +1215,8 @@ static int coda_start_encoding(struct coda_ctx *ctx)
 		coda_write(dev, value, CODA_CMD_ENC_SEQ_GOP_SIZE);
 	}
 
-	if (ctx->params.bitrate) {
+	if (ctx->params.bitrate && (ctx->params.frame_rc_enable ||
+				    ctx->params.mb_rc_enable)) {
 		ctx->params.bitrate_changed = false;
 		ctx->params.h264_intra_qp_changed = false;
 
@@ -1276,7 +1277,11 @@ static int coda_start_encoding(struct coda_ctx *ctx)
 	}
 	coda_write(dev, value, CODA_CMD_ENC_SEQ_OPTION);
 
-	coda_write(dev, 0, CODA_CMD_ENC_SEQ_RC_INTERVAL_MODE);
+	if (ctx->params.frame_rc_enable && !ctx->params.mb_rc_enable)
+		value = 1;
+	else
+		value = 0;
+	coda_write(dev, value, CODA_CMD_ENC_SEQ_RC_INTERVAL_MODE);
 
 	coda_setup_iram(ctx);
 
diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index d0d093dd8f7c..6f41f74d492c 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -159,6 +159,7 @@ static const struct coda_codec coda9_codecs[] = {
 	CODA_CODEC(CODA9_MODE_DECODE_H264, V4L2_PIX_FMT_H264,   V4L2_PIX_FMT_YUV420, 1920, 1088),
 	CODA_CODEC(CODA9_MODE_DECODE_MP2,  V4L2_PIX_FMT_MPEG2,  V4L2_PIX_FMT_YUV420, 1920, 1088),
 	CODA_CODEC(CODA9_MODE_DECODE_MP4,  V4L2_PIX_FMT_MPEG4,  V4L2_PIX_FMT_YUV420, 1920, 1088),
+	CODA_CODEC(CODA9_MODE_DECODE_MJPG, V4L2_PIX_FMT_JPEG,	V4L2_PIX_FMT_YUV420, 8192, 8192),
 };
 
 struct coda_video_device {
@@ -252,6 +253,22 @@ static const struct coda_video_device coda9_jpeg_encoder = {
 	},
 };
 
+static const struct coda_video_device coda9_jpeg_decoder = {
+	.name = "coda-jpeg-decoder",
+	.type = CODA_INST_DECODER,
+	.ops = &coda9_jpeg_decode_ops,
+	.direct = true,
+	.src_formats = {
+		V4L2_PIX_FMT_JPEG,
+	},
+	.dst_formats = {
+		V4L2_PIX_FMT_NV12,
+		V4L2_PIX_FMT_YUV420,
+		V4L2_PIX_FMT_YVU420,
+		V4L2_PIX_FMT_YUV422P,
+	},
+};
+
 static const struct coda_video_device *codadx6_video_devices[] = {
 	&coda_bit_encoder,
 };
@@ -270,6 +287,7 @@ static const struct coda_video_device *coda7_video_devices[] = {
 
 static const struct coda_video_device *coda9_video_devices[] = {
 	&coda9_jpeg_encoder,
+	&coda9_jpeg_decoder,
 	&coda_bit_encoder,
 	&coda_bit_decoder,
 };
@@ -411,6 +429,12 @@ static int coda_querycap(struct file *file, void *priv,
 	return 0;
 }
 
+static const u32 coda_formats_420[CODA_MAX_FORMATS] = {
+		V4L2_PIX_FMT_NV12,
+		V4L2_PIX_FMT_YUV420,
+		V4L2_PIX_FMT_YVU420,
+};
+
 static int coda_enum_fmt(struct file *file, void *priv,
 			 struct v4l2_fmtdesc *f)
 {
@@ -421,10 +445,33 @@ static int coda_enum_fmt(struct file *file, void *priv,
 
 	if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
 		formats = cvd->src_formats;
-	else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		struct coda_q_data *q_data_src;
+		struct vb2_queue *src_vq;
+
 		formats = cvd->dst_formats;
-	else
+
+		/*
+		 * If the source format is already fixed, only allow the same
+		 * chroma subsampling.
+		 */
+		q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+		src_vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
+					 V4L2_BUF_TYPE_VIDEO_OUTPUT);
+		if (q_data_src->fourcc == V4L2_PIX_FMT_JPEG &&
+		    vb2_is_streaming(src_vq)) {
+			if (ctx->params.jpeg_chroma_subsampling ==
+			    V4L2_JPEG_CHROMA_SUBSAMPLING_420) {
+				formats = coda_formats_420;
+			} else if (ctx->params.jpeg_chroma_subsampling ==
+				   V4L2_JPEG_CHROMA_SUBSAMPLING_422) {
+				f->pixelformat = V4L2_PIX_FMT_YUV422P;
+				return f->index ? -EINVAL : 0;
+			}
+		}
+	} else {
 		return -EINVAL;
+	}
 
 	if (f->index >= CODA_MAX_FORMATS || formats[f->index] == 0)
 		return -EINVAL;
@@ -614,12 +661,23 @@ static int coda_try_fmt_vid_cap(struct file *file, void *priv,
 
 	/*
 	 * If the source format is already fixed, only allow the same output
-	 * resolution
+	 * resolution. When decoding JPEG images, we also have to make sure to
+	 * use the same chroma subsampling.
 	 */
 	src_vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
 	if (vb2_is_streaming(src_vq)) {
 		f->fmt.pix.width = q_data_src->width;
 		f->fmt.pix.height = q_data_src->height;
+
+		if (q_data_src->fourcc == V4L2_PIX_FMT_JPEG) {
+			if (ctx->params.jpeg_chroma_subsampling ==
+			    V4L2_JPEG_CHROMA_SUBSAMPLING_420 &&
+			    f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV422P)
+				f->fmt.pix.pixelformat = V4L2_PIX_FMT_NV12;
+			else if (ctx->params.jpeg_chroma_subsampling ==
+				 V4L2_JPEG_CHROMA_SUBSAMPLING_422)
+				f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P;
+		}
 	}
 
 	f->fmt.pix.colorspace = ctx->colorspace;
@@ -637,12 +695,18 @@ static int coda_try_fmt_vid_cap(struct file *file, void *priv,
 	if (ret < 0)
 		return ret;
 
-	/* The h.264 decoder only returns complete 16x16 macroblocks */
-	if (codec && codec->src_fourcc == V4L2_PIX_FMT_H264) {
-		f->fmt.pix.height = round_up(f->fmt.pix.height, 16);
+	/* The decoders always write complete macroblocks or MCUs */
+	if (ctx->inst_type == CODA_INST_DECODER) {
 		f->fmt.pix.bytesperline = round_up(f->fmt.pix.width, 16);
-		f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
-				       f->fmt.pix.height * 3 / 2;
+		f->fmt.pix.height = round_up(f->fmt.pix.height, 16);
+		if (codec->src_fourcc == V4L2_PIX_FMT_JPEG &&
+		    f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV422P) {
+			f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
+					       f->fmt.pix.height * 2;
+		} else {
+			f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
+					       f->fmt.pix.height * 3 / 2;
+		}
 
 		ret = coda_try_fmt_vdoa(ctx, f, &use_vdoa);
 		if (ret < 0)
@@ -747,6 +811,7 @@ static int coda_s_fmt(struct coda_ctx *ctx, struct v4l2_format *f,
 		/* else fall through */
 	case V4L2_PIX_FMT_YUV420:
 	case V4L2_PIX_FMT_YVU420:
+	case V4L2_PIX_FMT_YUV422P:
 		ctx->tiled_map_type = GDI_LINEAR_FRAME_MAP;
 		break;
 	default:
@@ -1088,6 +1153,51 @@ static int coda_try_decoder_cmd(struct file *file, void *fh,
 	return v4l2_m2m_ioctl_try_decoder_cmd(file, fh, dc);
 }
 
+static bool coda_mark_last_meta(struct coda_ctx *ctx)
+{
+	struct coda_buffer_meta *meta;
+
+	coda_dbg(1, ctx, "marking last meta\n");
+
+	spin_lock(&ctx->buffer_meta_lock);
+	if (list_empty(&ctx->buffer_meta_list)) {
+		spin_unlock(&ctx->buffer_meta_lock);
+		return false;
+	}
+
+	meta = list_last_entry(&ctx->buffer_meta_list, struct coda_buffer_meta,
+			       list);
+	meta->last = true;
+
+	spin_unlock(&ctx->buffer_meta_lock);
+	return true;
+}
+
+static bool coda_mark_last_dst_buf(struct coda_ctx *ctx)
+{
+	struct vb2_v4l2_buffer *buf;
+	struct vb2_buffer *dst_vb;
+	struct vb2_queue *dst_vq;
+	unsigned long flags;
+
+	coda_dbg(1, ctx, "marking last capture buffer\n");
+
+	dst_vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	spin_lock_irqsave(&dst_vq->done_lock, flags);
+	if (list_empty(&dst_vq->done_list)) {
+		spin_unlock_irqrestore(&dst_vq->done_lock, flags);
+		return false;
+	}
+
+	dst_vb = list_last_entry(&dst_vq->done_list, struct vb2_buffer,
+				 done_entry);
+	buf = to_vb2_v4l2_buffer(dst_vb);
+	buf->flags |= V4L2_BUF_FLAG_LAST;
+
+	spin_unlock_irqrestore(&dst_vq->done_lock, flags);
+	return true;
+}
+
 static int coda_decoder_cmd(struct file *file, void *fh,
 			    struct v4l2_decoder_cmd *dc)
 {
@@ -1120,6 +1230,8 @@ static int coda_decoder_cmd(struct file *file, void *fh,
 		stream_end = false;
 		wakeup = false;
 
+		mutex_lock(&ctx->wakeup_mutex);
+
 		buf = v4l2_m2m_last_src_buf(ctx->fh.m2m_ctx);
 		if (buf) {
 			coda_dbg(1, ctx, "marking last pending buffer\n");
@@ -1132,22 +1244,14 @@ static int coda_decoder_cmd(struct file *file, void *fh,
 				stream_end = true;
 			}
 		} else {
-			coda_dbg(1, ctx, "marking last meta\n");
-
-			/* Mark last meta */
-			spin_lock(&ctx->buffer_meta_lock);
-			if (!list_empty(&ctx->buffer_meta_list)) {
-				struct coda_buffer_meta *meta;
-
-				meta = list_last_entry(&ctx->buffer_meta_list,
-						       struct coda_buffer_meta,
-						       list);
-				meta->last = true;
-				stream_end = true;
-			} else {
-				wakeup = true;
-			}
-			spin_unlock(&ctx->buffer_meta_lock);
+			if (ctx->use_bit)
+				if (coda_mark_last_meta(ctx))
+					stream_end = true;
+				else
+					wakeup = true;
+			else
+				if (!coda_mark_last_dst_buf(ctx))
+					wakeup = true;
 		}
 
 		if (stream_end) {
@@ -1164,6 +1268,7 @@ static int coda_decoder_cmd(struct file *file, void *fh,
 			coda_wake_up_capture_queue(ctx);
 		}
 
+		mutex_unlock(&ctx->wakeup_mutex);
 		break;
 	default:
 		return -EINVAL;
@@ -1894,6 +1999,42 @@ static int coda_start_streaming(struct vb2_queue *q, unsigned int count)
 			}
 		}
 
+		/*
+		 * Check the first input JPEG buffer to determine chroma
+		 * subsampling.
+		 */
+		if (q_data_src->fourcc == V4L2_PIX_FMT_JPEG) {
+			buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+			ret = coda_jpeg_decode_header(ctx, &buf->vb2_buf);
+			if (ret < 0) {
+				v4l2_err(v4l2_dev,
+					 "failed to decode JPEG header: %d\n",
+					 ret);
+				goto err;
+			}
+
+			q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+			q_data_dst->width = round_up(q_data_src->width, 16);
+			q_data_dst->height = round_up(q_data_src->height, 16);
+			q_data_dst->bytesperline = q_data_dst->width;
+			if (ctx->params.jpeg_chroma_subsampling ==
+			    V4L2_JPEG_CHROMA_SUBSAMPLING_420) {
+				q_data_dst->sizeimage =
+						q_data_dst->bytesperline *
+						q_data_dst->height * 3 / 2;
+				if (q_data_dst->fourcc != V4L2_PIX_FMT_YUV420)
+					q_data_dst->fourcc = V4L2_PIX_FMT_NV12;
+			} else {
+				q_data_dst->sizeimage =
+						q_data_dst->bytesperline *
+						q_data_dst->height * 2;
+				q_data_dst->fourcc = V4L2_PIX_FMT_YUV422P;
+			}
+			q_data_dst->rect.left = 0;
+			q_data_dst->rect.top = 0;
+			q_data_dst->rect.width = q_data_src->width;
+			q_data_dst->rect.height = q_data_src->height;
+		}
 		ctx->streamon_out = 1;
 	} else {
 		ctx->streamon_cap = 1;
@@ -2082,6 +2223,12 @@ static int coda_s_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_MPEG_VIDEO_H264_CONSTRAINED_INTRA_PREDICTION:
 		ctx->params.h264_constrained_intra_pred_flag = ctrl->val;
 		break;
+	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:
+		ctx->params.frame_rc_enable = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:
+		ctx->params.mb_rc_enable = ctrl->val;
+		break;
 	case V4L2_CID_MPEG_VIDEO_H264_CHROMA_QP_INDEX_OFFSET:
 		ctx->params.h264_chroma_qp_index_offset = ctrl->val;
 		break;
@@ -2180,6 +2327,10 @@ static void coda_encode_ctrls(struct coda_ctx *ctx)
 	v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops,
 		V4L2_CID_MPEG_VIDEO_H264_CONSTRAINED_INTRA_PREDICTION, 0, 1, 1,
 		0);
+	v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops,
+		V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE, 0, 1, 1, 1);
+	v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops,
+		V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE, 0, 1, 1, 1);
 	v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops,
 		V4L2_CID_MPEG_VIDEO_H264_CHROMA_QP_INDEX_OFFSET, -12, 12, 1, 0);
 	v4l2_ctrl_new_std_menu(&ctx->ctrls, &coda_ctrl_ops,
diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c
index 92234fd1f4fd..00d19859db50 100644
--- a/drivers/media/platform/coda/coda-jpeg.c
+++ b/drivers/media/platform/coda/coda-jpeg.c
@@ -15,6 +15,7 @@
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-fh.h>
+#include <media/v4l2-jpeg.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-core.h>
 #include <media/videobuf2-dma-contig.h>
@@ -23,10 +24,12 @@
 #include "trace.h"
 
 #define SOI_MARKER	0xffd8
+#define APP9_MARKER	0xffe9
 #define DRI_MARKER	0xffdd
 #define DQT_MARKER	0xffdb
 #define DHT_MARKER	0xffc4
 #define SOF_MARKER	0xffc0
+#define SOS_MARKER	0xffda
 #define EOI_MARKER	0xffd9
 
 enum {
@@ -37,6 +40,18 @@ enum {
 	CODA9_JPEG_FORMAT_400,
 };
 
+struct coda_huff_tab {
+	u8 luma_dc[16 + 12];
+	u8 chroma_dc[16 + 12];
+	u8 luma_ac[16 + 162];
+	u8 chroma_ac[16 + 162];
+
+	/* DC Luma, DC Chroma, AC Luma, AC Chroma */
+	s16	min[4 * 16];
+	s16	max[4 * 16];
+	s8	ptr[4 * 16];
+};
+
 #define CODA9_JPEG_ENC_HUFF_DATA_SIZE	(256 + 256 + 16 + 16)
 
 /*
@@ -247,6 +262,291 @@ bool coda_jpeg_check_buffer(struct coda_ctx *ctx, struct vb2_buffer *vb)
 	return false;
 }
 
+static int coda9_jpeg_gen_dec_huff_tab(struct coda_ctx *ctx, int tab_num);
+
+int coda_jpeg_decode_header(struct coda_ctx *ctx, struct vb2_buffer *vb)
+{
+	struct coda_dev *dev = ctx->dev;
+	u8 *buf = vb2_plane_vaddr(vb, 0);
+	size_t len = vb2_get_plane_payload(vb, 0);
+	struct v4l2_jpeg_scan_header scan_header;
+	struct v4l2_jpeg_reference quantization_tables[4] = { };
+	struct v4l2_jpeg_reference huffman_tables[4] = { };
+	struct v4l2_jpeg_header header = {
+		.scan = &scan_header,
+		.quantization_tables = quantization_tables,
+		.huffman_tables = huffman_tables,
+	};
+	struct coda_q_data *q_data_src;
+	struct coda_huff_tab *huff_tab;
+	int i, j, ret;
+
+	ret = v4l2_jpeg_parse_header(buf, len, &header);
+	if (ret < 0) {
+		v4l2_err(&dev->v4l2_dev, "failed to parse header\n");
+		return ret;
+	}
+
+	ctx->params.jpeg_restart_interval = header.restart_interval;
+
+	/* check frame header */
+	if (header.frame.height > ctx->codec->max_h ||
+	    header.frame.width > ctx->codec->max_w) {
+		v4l2_err(&dev->v4l2_dev, "invalid dimensions: %dx%d\n",
+			 header.frame.width, header.frame.height);
+		return -EINVAL;
+	}
+
+	q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	if (header.frame.height != q_data_src->height ||
+	    header.frame.width != q_data_src->width) {
+		v4l2_err(&dev->v4l2_dev,
+			 "dimensions don't match format: %dx%d\n",
+			 header.frame.width, header.frame.height);
+		return -EINVAL;
+	}
+
+	if (header.frame.num_components != 3) {
+		v4l2_err(&dev->v4l2_dev,
+			 "unsupported number of components: %d\n",
+			 header.frame.num_components);
+		return -EINVAL;
+	}
+
+	/* install quantization tables */
+	if (quantization_tables[3].start) {
+		v4l2_err(&dev->v4l2_dev,
+			 "only 3 quantization tables supported\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < 3; i++) {
+		if (!quantization_tables[i].start)
+			continue;
+		if (quantization_tables[i].length != 64) {
+			v4l2_err(&dev->v4l2_dev,
+				 "only 8-bit quantization tables supported\n");
+			continue;
+		}
+		if (!ctx->params.jpeg_qmat_tab[i])
+			ctx->params.jpeg_qmat_tab[i] = kmalloc(64, GFP_KERNEL);
+		memcpy(ctx->params.jpeg_qmat_tab[i],
+		       quantization_tables[i].start, 64);
+	}
+
+	/* install Huffman tables */
+	for (i = 0; i < 4; i++) {
+		if (!huffman_tables[i].start) {
+			v4l2_err(&dev->v4l2_dev, "missing Huffman table\n");
+			return -EINVAL;
+		}
+		/* AC tables should be between 17 -> 178, DC between 17 -> 28 */
+		if (huffman_tables[i].length < 17 ||
+		    huffman_tables[i].length > 178 ||
+		    ((i & 2) == 0 && huffman_tables[i].length > 28)) {
+			v4l2_err(&dev->v4l2_dev,
+				 "invalid Huffman table %d length: %zu\n",
+				 i, huffman_tables[i].length);
+			return -EINVAL;
+		}
+	}
+	huff_tab = ctx->params.jpeg_huff_tab;
+	if (!huff_tab) {
+		huff_tab = kzalloc(sizeof(struct coda_huff_tab), GFP_KERNEL);
+		if (!huff_tab)
+			return -ENOMEM;
+		ctx->params.jpeg_huff_tab = huff_tab;
+	}
+
+	memset(huff_tab, 0, sizeof(*huff_tab));
+	memcpy(huff_tab->luma_dc, huffman_tables[0].start, huffman_tables[0].length);
+	memcpy(huff_tab->chroma_dc, huffman_tables[1].start, huffman_tables[1].length);
+	memcpy(huff_tab->luma_ac, huffman_tables[2].start, huffman_tables[2].length);
+	memcpy(huff_tab->chroma_ac, huffman_tables[3].start, huffman_tables[3].length);
+
+	/* check scan header */
+	for (i = 0; i < scan_header.num_components; i++) {
+		struct v4l2_jpeg_scan_component_spec *scan_component;
+
+		scan_component = &scan_header.component[i];
+		for (j = 0; j < header.frame.num_components; j++) {
+			if (header.frame.component[j].component_identifier ==
+			    scan_component->component_selector)
+				break;
+		}
+		if (j == header.frame.num_components)
+			continue;
+
+		ctx->params.jpeg_huff_dc_index[j] =
+			scan_component->dc_entropy_coding_table_selector;
+		ctx->params.jpeg_huff_ac_index[j] =
+			scan_component->ac_entropy_coding_table_selector;
+	}
+
+	/* Generate Huffman table information */
+	for (i = 0; i < 4; i++)
+		coda9_jpeg_gen_dec_huff_tab(ctx, i);
+
+	/* start of entropy coded segment */
+	ctx->jpeg_ecs_offset = header.ecs_offset;
+
+	switch (header.frame.subsampling) {
+	case V4L2_JPEG_CHROMA_SUBSAMPLING_420:
+	case V4L2_JPEG_CHROMA_SUBSAMPLING_422:
+		ctx->params.jpeg_chroma_subsampling = header.frame.subsampling;
+		break;
+	default:
+		v4l2_err(&dev->v4l2_dev, "chroma subsampling not supported: %d",
+			 header.frame.subsampling);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static inline void coda9_jpeg_write_huff_values(struct coda_dev *dev, u8 *bits,
+						int num_values)
+{
+	s8 *values = (s8 *)(bits + 16);
+	int huff_length, i;
+
+	for (huff_length = 0, i = 0; i < 16; i++)
+		huff_length += bits[i];
+	for (i = huff_length; i < num_values; i++)
+		values[i] = -1;
+	for (i = 0; i < num_values; i++)
+		coda_write(dev, (s32)values[i], CODA9_REG_JPEG_HUFF_DATA);
+}
+
+static int coda9_jpeg_dec_huff_setup(struct coda_ctx *ctx)
+{
+	struct coda_huff_tab *huff_tab = ctx->params.jpeg_huff_tab;
+	struct coda_dev *dev = ctx->dev;
+	s16 *huff_min = huff_tab->min;
+	s16 *huff_max = huff_tab->max;
+	s8 *huff_ptr = huff_tab->ptr;
+	int i;
+
+	/* MIN Tables */
+	coda_write(dev, 0x003, CODA9_REG_JPEG_HUFF_CTRL);
+	coda_write(dev, 0x000, CODA9_REG_JPEG_HUFF_ADDR);
+	for (i = 0; i < 4 * 16; i++)
+		coda_write(dev, (s32)huff_min[i], CODA9_REG_JPEG_HUFF_DATA);
+
+	/* MAX Tables */
+	coda_write(dev, 0x403, CODA9_REG_JPEG_HUFF_CTRL);
+	coda_write(dev, 0x440, CODA9_REG_JPEG_HUFF_ADDR);
+	for (i = 0; i < 4 * 16; i++)
+		coda_write(dev, (s32)huff_max[i], CODA9_REG_JPEG_HUFF_DATA);
+
+	/* PTR Tables */
+	coda_write(dev, 0x803, CODA9_REG_JPEG_HUFF_CTRL);
+	coda_write(dev, 0x880, CODA9_REG_JPEG_HUFF_ADDR);
+	for (i = 0; i < 4 * 16; i++)
+		coda_write(dev, (s32)huff_ptr[i], CODA9_REG_JPEG_HUFF_DATA);
+
+	/* VAL Tables: DC Luma, DC Chroma, AC Luma, AC Chroma */
+	coda_write(dev, 0xc03, CODA9_REG_JPEG_HUFF_CTRL);
+	coda9_jpeg_write_huff_values(dev, huff_tab->luma_dc, 12);
+	coda9_jpeg_write_huff_values(dev, huff_tab->chroma_dc, 12);
+	coda9_jpeg_write_huff_values(dev, huff_tab->luma_ac, 162);
+	coda9_jpeg_write_huff_values(dev, huff_tab->chroma_ac, 162);
+	coda_write(dev, 0x000, CODA9_REG_JPEG_HUFF_CTRL);
+	return 0;
+}
+
+static inline void coda9_jpeg_write_qmat_tab(struct coda_dev *dev,
+					     u8 *qmat, int index)
+{
+	int i;
+
+	coda_write(dev, index | 0x3, CODA9_REG_JPEG_QMAT_CTRL);
+	for (i = 0; i < 64; i++)
+		coda_write(dev, qmat[i], CODA9_REG_JPEG_QMAT_DATA);
+	coda_write(dev, 0, CODA9_REG_JPEG_QMAT_CTRL);
+}
+
+static void coda9_jpeg_qmat_setup(struct coda_ctx *ctx)
+{
+	struct coda_dev *dev = ctx->dev;
+	int *qmat_index = ctx->params.jpeg_qmat_index;
+	u8 **qmat_tab = ctx->params.jpeg_qmat_tab;
+
+	coda9_jpeg_write_qmat_tab(dev, qmat_tab[qmat_index[0]], 0x00);
+	coda9_jpeg_write_qmat_tab(dev, qmat_tab[qmat_index[1]], 0x40);
+	coda9_jpeg_write_qmat_tab(dev, qmat_tab[qmat_index[2]], 0x80);
+}
+
+static void coda9_jpeg_dec_bbc_gbu_setup(struct coda_ctx *ctx,
+					 struct vb2_buffer *buf, u32 ecs_offset)
+{
+	struct coda_dev *dev = ctx->dev;
+	int page_ptr, word_ptr, bit_ptr;
+	u32 bbc_base_addr, end_addr;
+	int bbc_cur_pos;
+	int ret, val;
+
+	bbc_base_addr = vb2_dma_contig_plane_dma_addr(buf, 0);
+	end_addr = bbc_base_addr + vb2_get_plane_payload(buf, 0);
+
+	page_ptr = ecs_offset / 256;
+	word_ptr = (ecs_offset % 256) / 4;
+	if (page_ptr & 1)
+		word_ptr += 64;
+	bit_ptr = (ecs_offset % 4) * 8;
+	if (word_ptr & 1)
+		bit_ptr += 32;
+	word_ptr &= ~0x1;
+
+	coda_write(dev, end_addr, CODA9_REG_JPEG_BBC_WR_PTR);
+	coda_write(dev, bbc_base_addr, CODA9_REG_JPEG_BBC_BAS_ADDR);
+
+	/* Leave 3 256-byte page margin to avoid a BBC interrupt */
+	coda_write(dev, end_addr + 256 * 3 + 256, CODA9_REG_JPEG_BBC_END_ADDR);
+	val = DIV_ROUND_UP(vb2_plane_size(buf, 0), 256) + 3;
+	coda_write(dev, BIT(31) | val, CODA9_REG_JPEG_BBC_STRM_CTRL);
+
+	bbc_cur_pos = page_ptr;
+	coda_write(dev, bbc_cur_pos, CODA9_REG_JPEG_BBC_CUR_POS);
+	coda_write(dev, bbc_base_addr + (bbc_cur_pos << 8),
+			CODA9_REG_JPEG_BBC_EXT_ADDR);
+	coda_write(dev, (bbc_cur_pos & 1) << 6, CODA9_REG_JPEG_BBC_INT_ADDR);
+	coda_write(dev, 64, CODA9_REG_JPEG_BBC_DATA_CNT);
+	coda_write(dev, 0, CODA9_REG_JPEG_BBC_COMMAND);
+	do {
+		ret = coda_read(dev, CODA9_REG_JPEG_BBC_BUSY);
+	} while (ret == 1);
+
+	bbc_cur_pos++;
+	coda_write(dev, bbc_cur_pos, CODA9_REG_JPEG_BBC_CUR_POS);
+	coda_write(dev, bbc_base_addr + (bbc_cur_pos << 8),
+			CODA9_REG_JPEG_BBC_EXT_ADDR);
+	coda_write(dev, (bbc_cur_pos & 1) << 6, CODA9_REG_JPEG_BBC_INT_ADDR);
+	coda_write(dev, 64, CODA9_REG_JPEG_BBC_DATA_CNT);
+	coda_write(dev, 0, CODA9_REG_JPEG_BBC_COMMAND);
+	do {
+		ret = coda_read(dev, CODA9_REG_JPEG_BBC_BUSY);
+	} while (ret == 1);
+
+	bbc_cur_pos++;
+	coda_write(dev, bbc_cur_pos, CODA9_REG_JPEG_BBC_CUR_POS);
+	coda_write(dev, 1, CODA9_REG_JPEG_BBC_CTRL);
+
+	coda_write(dev, 0, CODA9_REG_JPEG_GBU_TT_CNT);
+	coda_write(dev, word_ptr, CODA9_REG_JPEG_GBU_WD_PTR);
+	coda_write(dev, 0, CODA9_REG_JPEG_GBU_BBSR);
+	coda_write(dev, 127, CODA9_REG_JPEG_GBU_BBER);
+	if (page_ptr & 1) {
+		coda_write(dev, 0, CODA9_REG_JPEG_GBU_BBIR);
+		coda_write(dev, 0, CODA9_REG_JPEG_GBU_BBHR);
+	} else {
+		coda_write(dev, 64, CODA9_REG_JPEG_GBU_BBIR);
+		coda_write(dev, 64, CODA9_REG_JPEG_GBU_BBHR);
+	}
+	coda_write(dev, 4, CODA9_REG_JPEG_GBU_CTRL);
+	coda_write(dev, bit_ptr, CODA9_REG_JPEG_GBU_FF_RPTR);
+	coda_write(dev, 3, CODA9_REG_JPEG_GBU_CTRL);
+}
+
 static const int bus_req_num[] = {
 	[CODA9_JPEG_FORMAT_420] = 2,
 	[CODA9_JPEG_FORMAT_422] = 3,
@@ -345,6 +645,71 @@ static int coda9_jpeg_gen_enc_huff_tab(struct coda_ctx *ctx, int tab_num,
 #define DC_TABLE_INDEX1		    2
 #define AC_TABLE_INDEX1		    3
 
+static u8 *coda9_jpeg_get_huff_bits(struct coda_ctx *ctx, int tab_num)
+{
+	struct coda_huff_tab *huff_tab = ctx->params.jpeg_huff_tab;
+
+	if (!huff_tab)
+		return NULL;
+
+	switch (tab_num) {
+	case DC_TABLE_INDEX0: return huff_tab->luma_dc;
+	case AC_TABLE_INDEX0: return huff_tab->luma_ac;
+	case DC_TABLE_INDEX1: return huff_tab->chroma_dc;
+	case AC_TABLE_INDEX1: return huff_tab->chroma_ac;
+	}
+
+	return NULL;
+}
+
+static int coda9_jpeg_gen_dec_huff_tab(struct coda_ctx *ctx, int tab_num)
+{
+	int ptr_cnt = 0, huff_code = 0, zero_flag = 0, data_flag = 0;
+	u8 *huff_bits;
+	s16 *huff_max;
+	s16 *huff_min;
+	s8 *huff_ptr;
+	int ofs;
+	int i;
+
+	huff_bits = coda9_jpeg_get_huff_bits(ctx, tab_num);
+	if (!huff_bits)
+		return -EINVAL;
+
+	/* DC/AC Luma, DC/AC Chroma -> DC Luma/Chroma, AC Luma/Chroma */
+	ofs = ((tab_num & 1) << 1) | ((tab_num >> 1) & 1);
+	ofs *= 16;
+
+	huff_ptr = ctx->params.jpeg_huff_tab->ptr + ofs;
+	huff_max = ctx->params.jpeg_huff_tab->max + ofs;
+	huff_min = ctx->params.jpeg_huff_tab->min + ofs;
+
+	for (i = 0; i < 16; i++) {
+		if (huff_bits[i]) {
+			huff_ptr[i] = ptr_cnt;
+			ptr_cnt += huff_bits[i];
+			huff_min[i] = huff_code;
+			huff_max[i] = huff_code + (huff_bits[i] - 1);
+			data_flag = 1;
+			zero_flag = 0;
+		} else {
+			huff_ptr[i] = -1;
+			huff_min[i] = -1;
+			huff_max[i] = -1;
+			zero_flag = 1;
+		}
+
+		if (data_flag == 1) {
+			if (zero_flag == 1)
+				huff_code <<= 1;
+			else
+				huff_code = (huff_max[i] + 1) << 1;
+		}
+	}
+
+	return 0;
+}
+
 static int coda9_jpeg_load_huff_tab(struct coda_ctx *ctx)
 {
 	struct {
@@ -880,6 +1245,13 @@ static void coda9_jpeg_finish_encode(struct coda_ctx *ctx)
 	coda_dbg(1, ctx, "job finished: encoded frame (%u)%s\n",
 		 dst_buf->sequence,
 		 (dst_buf->flags & V4L2_BUF_FLAG_LAST) ? " (last)" : "");
+
+	/*
+	 * Reset JPEG processing unit after each encode run to work
+	 * around hangups when switching context between encoder and
+	 * decoder.
+	 */
+	coda_hw_reset(ctx);
 }
 
 static void coda9_jpeg_release(struct coda_ctx *ctx)
@@ -893,6 +1265,7 @@ static void coda9_jpeg_release(struct coda_ctx *ctx)
 	for (i = 0; i < 3; i++)
 		kfree(ctx->params.jpeg_qmat_tab[i]);
 	kfree(ctx->params.jpeg_huff_data);
+	kfree(ctx->params.jpeg_huff_tab);
 }
 
 const struct coda_context_ops coda9_jpeg_encode_ops = {
@@ -903,6 +1276,210 @@ const struct coda_context_ops coda9_jpeg_encode_ops = {
 	.release = coda9_jpeg_release,
 };
 
+/*
+ * Decoder context operations
+ */
+
+static int coda9_jpeg_start_decoding(struct coda_ctx *ctx)
+{
+	ctx->params.jpeg_qmat_index[0] = 0;
+	ctx->params.jpeg_qmat_index[1] = 1;
+	ctx->params.jpeg_qmat_index[2] = 1;
+	ctx->params.jpeg_qmat_tab[0] = luma_q;
+	ctx->params.jpeg_qmat_tab[1] = chroma_q;
+	/* nothing more to do here */
+
+	/* TODO: we could already scan the first header to get the chroma
+	 * format.
+	 */
+
+	return 0;
+}
+
+static int coda9_jpeg_prepare_decode(struct coda_ctx *ctx)
+{
+	struct coda_dev *dev = ctx->dev;
+	int aligned_width, aligned_height;
+	int chroma_format;
+	int ret;
+	u32 val, dst_fourcc;
+	struct coda_q_data *q_data_src, *q_data_dst;
+	struct vb2_v4l2_buffer *src_buf, *dst_buf;
+	int chroma_interleave;
+
+	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+	q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	dst_fourcc = q_data_dst->fourcc;
+
+	if (vb2_get_plane_payload(&src_buf->vb2_buf, 0) == 0)
+		vb2_set_plane_payload(&src_buf->vb2_buf, 0,
+				      vb2_plane_size(&src_buf->vb2_buf, 0));
+
+	chroma_format = coda9_jpeg_chroma_format(q_data_dst->fourcc);
+	if (chroma_format < 0) {
+		v4l2_m2m_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx);
+		return chroma_format;
+	}
+
+	ret = coda_jpeg_decode_header(ctx, &src_buf->vb2_buf);
+	if (ret < 0) {
+		v4l2_err(&dev->v4l2_dev, "failed to decode JPEG header: %d\n",
+			 ret);
+
+		src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+		dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+		v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE);
+		v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
+
+		v4l2_m2m_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx);
+		return ret;
+	}
+
+	/* Round image dimensions to multiple of MCU size */
+	aligned_width = round_up(q_data_src->width, width_align[chroma_format]);
+	aligned_height = round_up(q_data_src->height, height_align[chroma_format]);
+	if (aligned_width != q_data_dst->bytesperline) {
+		v4l2_err(&dev->v4l2_dev, "stride mismatch: %d != %d\n",
+			 aligned_width, q_data_dst->bytesperline);
+	}
+
+	coda_set_gdi_regs(ctx);
+
+	val = ctx->params.jpeg_huff_ac_index[0] << 12 |
+	      ctx->params.jpeg_huff_ac_index[1] << 11 |
+	      ctx->params.jpeg_huff_ac_index[2] << 10 |
+	      ctx->params.jpeg_huff_dc_index[0] << 9 |
+	      ctx->params.jpeg_huff_dc_index[1] << 8 |
+	      ctx->params.jpeg_huff_dc_index[2] << 7;
+	if (ctx->params.jpeg_huff_tab)
+		val |= CODA9_JPEG_PIC_CTRL_USER_HUFFMAN_EN;
+	coda_write(dev, val, CODA9_REG_JPEG_PIC_CTRL);
+
+	coda_write(dev, aligned_width << 16 | aligned_height,
+			CODA9_REG_JPEG_PIC_SIZE);
+
+	chroma_interleave = (dst_fourcc == V4L2_PIX_FMT_NV12);
+	coda_write(dev, 0, CODA9_REG_JPEG_ROT_INFO);
+	coda_write(dev, bus_req_num[chroma_format], CODA9_REG_JPEG_OP_INFO);
+	coda_write(dev, mcu_info[chroma_format], CODA9_REG_JPEG_MCU_INFO);
+	coda_write(dev, 0, CODA9_REG_JPEG_SCL_INFO);
+	coda_write(dev, chroma_interleave, CODA9_REG_JPEG_DPB_CONFIG);
+	coda_write(dev, ctx->params.jpeg_restart_interval,
+			CODA9_REG_JPEG_RST_INTVAL);
+
+	if (ctx->params.jpeg_huff_tab) {
+		ret = coda9_jpeg_dec_huff_setup(ctx);
+		if (ret < 0) {
+			v4l2_err(&dev->v4l2_dev,
+				 "failed to set up Huffman tables: %d\n", ret);
+			v4l2_m2m_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx);
+			return ret;
+		}
+	}
+
+	coda9_jpeg_qmat_setup(ctx);
+
+	coda9_jpeg_dec_bbc_gbu_setup(ctx, &src_buf->vb2_buf,
+				     ctx->jpeg_ecs_offset);
+
+	coda_write(dev, 0, CODA9_REG_JPEG_RST_INDEX);
+	coda_write(dev, 0, CODA9_REG_JPEG_RST_COUNT);
+
+	coda_write(dev, 0, CODA9_REG_JPEG_DPCM_DIFF_Y);
+	coda_write(dev, 0, CODA9_REG_JPEG_DPCM_DIFF_CB);
+	coda_write(dev, 0, CODA9_REG_JPEG_DPCM_DIFF_CR);
+
+	coda_write(dev, 0, CODA9_REG_JPEG_ROT_INFO);
+
+	coda_write(dev, 1, CODA9_GDI_CONTROL);
+	do {
+		ret = coda_read(dev, CODA9_GDI_STATUS);
+	} while (!ret);
+
+	val = (chroma_format << 17) | (chroma_interleave << 16) |
+	      q_data_dst->bytesperline;
+	if (ctx->tiled_map_type == GDI_TILED_FRAME_MB_RASTER_MAP)
+		val |= 3 << 20;
+	coda_write(dev, val, CODA9_GDI_INFO_CONTROL);
+
+	coda_write(dev, aligned_width << 16 | aligned_height,
+			CODA9_GDI_INFO_PIC_SIZE);
+
+	coda_write_base(ctx, q_data_dst, dst_buf, CODA9_GDI_INFO_BASE_Y);
+
+	coda_write(dev, 0, CODA9_REG_JPEG_DPB_BASE00);
+	coda_write(dev, 0, CODA9_GDI_CONTROL);
+	coda_write(dev, 1, CODA9_GDI_PIC_INIT_HOST);
+
+	trace_coda_jpeg_run(ctx, src_buf);
+
+	coda_write(dev, 1, CODA9_REG_JPEG_PIC_START);
+
+	return 0;
+}
+
+static void coda9_jpeg_finish_decode(struct coda_ctx *ctx)
+{
+	struct coda_dev *dev = ctx->dev;
+	struct vb2_v4l2_buffer *dst_buf, *src_buf;
+	struct coda_q_data *q_data_dst;
+	u32 err_mb;
+
+	err_mb = coda_read(dev, CODA9_REG_JPEG_PIC_ERRMB);
+	if (err_mb)
+		v4l2_err(&dev->v4l2_dev, "ERRMB: 0x%x\n", err_mb);
+
+	coda_write(dev, 0, CODA9_REG_JPEG_BBC_FLUSH_CMD);
+
+	/*
+	 * Lock to make sure that a decoder stop command running in parallel
+	 * will either already have marked src_buf as last, or it will wake up
+	 * the capture queue after the buffers are returned.
+	 */
+	mutex_lock(&ctx->wakeup_mutex);
+	src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+	dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+	dst_buf->sequence = ctx->osequence++;
+
+	trace_coda_jpeg_done(ctx, dst_buf);
+
+	dst_buf->flags &= ~(V4L2_BUF_FLAG_PFRAME | V4L2_BUF_FLAG_LAST);
+	dst_buf->flags |= V4L2_BUF_FLAG_KEYFRAME;
+	dst_buf->flags |= src_buf->flags & V4L2_BUF_FLAG_LAST;
+
+	v4l2_m2m_buf_copy_metadata(src_buf, dst_buf, false);
+
+	q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	vb2_set_plane_payload(&dst_buf->vb2_buf, 0, q_data_dst->sizeimage);
+
+	v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE);
+	coda_m2m_buf_done(ctx, dst_buf, err_mb ? VB2_BUF_STATE_ERROR :
+						 VB2_BUF_STATE_DONE);
+
+	mutex_unlock(&ctx->wakeup_mutex);
+
+	coda_dbg(1, ctx, "job finished: decoded frame (%u)%s\n",
+		 dst_buf->sequence,
+		 (dst_buf->flags & V4L2_BUF_FLAG_LAST) ? " (last)" : "");
+
+	/*
+	 * Reset JPEG processing unit after each decode run to work
+	 * around hangups when switching context between encoder and
+	 * decoder.
+	 */
+	coda_hw_reset(ctx);
+}
+
+const struct coda_context_ops coda9_jpeg_decode_ops = {
+	.queue_init = coda_encoder_queue_init, /* non-bitstream operation */
+	.start_streaming = coda9_jpeg_start_decoding,
+	.prepare_run = coda9_jpeg_prepare_decode,
+	.finish_run = coda9_jpeg_finish_decode,
+	.release = coda9_jpeg_release,
+};
+
 irqreturn_t coda9_jpeg_irq_handler(int irq, void *data)
 {
 	struct coda_dev *dev = data;
diff --git a/drivers/media/platform/coda/coda.h b/drivers/media/platform/coda/coda.h
index 43bda175f517..b81f3aca9209 100644
--- a/drivers/media/platform/coda/coda.h
+++ b/drivers/media/platform/coda/coda.h
@@ -69,7 +69,7 @@ struct coda_aux_buf {
 
 struct coda_dev {
 	struct v4l2_device	v4l2_dev;
-	struct video_device	vfd[5];
+	struct video_device	vfd[6];
 	struct device		*dev;
 	const struct coda_devtype *devtype;
 	int			firmware;
@@ -123,10 +123,15 @@ struct coda_params {
 	u8			mpeg4_inter_qp;
 	u8			gop_size;
 	int			intra_refresh;
+	enum v4l2_jpeg_chroma_subsampling jpeg_chroma_subsampling;
 	u8			jpeg_quality;
 	u8			jpeg_restart_interval;
 	u8			*jpeg_qmat_tab[3];
+	int			jpeg_qmat_index[3];
+	int			jpeg_huff_dc_index[3];
+	int			jpeg_huff_ac_index[3];
 	u32			*jpeg_huff_data;
+	struct coda_huff_tab	*jpeg_huff_tab;
 	int			codec_mode;
 	int			codec_mode_aux;
 	enum v4l2_mpeg_video_multi_slice_mode slice_mode;
@@ -143,6 +148,8 @@ struct coda_params {
 	bool			h264_intra_qp_changed;
 	bool			intra_refresh_changed;
 	bool			slice_mode_changed;
+	bool			frame_rc_enable;
+	bool			mb_rc_enable;
 };
 
 struct coda_buffer_meta {
@@ -238,6 +245,7 @@ struct coda_ctx {
 	struct v4l2_fh			fh;
 	int				gopcounter;
 	int				runcounter;
+	int				jpeg_ecs_offset;
 	char				vpu_header[3][64];
 	int				vpu_header_size[3];
 	struct kfifo			bitstream_fifo;
@@ -362,12 +370,14 @@ void coda_update_profile_level_ctrls(struct coda_ctx *ctx, u8 profile_idc,
 				     u8 level_idc);
 
 bool coda_jpeg_check_buffer(struct coda_ctx *ctx, struct vb2_buffer *vb);
+int coda_jpeg_decode_header(struct coda_ctx *ctx, struct vb2_buffer *vb);
 int coda_jpeg_write_tables(struct coda_ctx *ctx);
 void coda_set_jpeg_compression_quality(struct coda_ctx *ctx, int quality);
 
 extern const struct coda_context_ops coda_bit_encode_ops;
 extern const struct coda_context_ops coda_bit_decode_ops;
 extern const struct coda_context_ops coda9_jpeg_encode_ops;
+extern const struct coda_context_ops coda9_jpeg_decode_ops;
 
 irqreturn_t coda_irq_handler(int irq, void *data);
 irqreturn_t coda9_jpeg_irq_handler(int irq, void *data);
diff --git a/drivers/media/platform/cros-ec-cec/Makefile b/drivers/media/platform/cros-ec-cec/Makefile
deleted file mode 100644
index 2615cdc6e227..000000000000
--- a/drivers/media/platform/cros-ec-cec/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_CROS_EC_CEC) += cros-ec-cec.o
diff --git a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
deleted file mode 100644
index 0e7e2772f08f..000000000000
--- a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * CEC driver for ChromeOS Embedded Controller
- *
- * Copyright (c) 2018 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/dmi.h>
-#include <linux/pci.h>
-#include <linux/cec.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/cros_ec_commands.h>
-#include <linux/platform_data/cros_ec_proto.h>
-#include <media/cec.h>
-#include <media/cec-notifier.h>
-
-#define DRV_NAME	"cros-ec-cec"
-
-/**
- * struct cros_ec_cec - Driver data for EC CEC
- *
- * @cros_ec: Pointer to EC device
- * @notifier: Notifier info for responding to EC events
- * @adap: CEC adapter
- * @notify: CEC notifier pointer
- * @rx_msg: storage for a received message
- */
-struct cros_ec_cec {
-	struct cros_ec_device *cros_ec;
-	struct notifier_block notifier;
-	struct cec_adapter *adap;
-	struct cec_notifier *notify;
-	struct cec_msg rx_msg;
-};
-
-static void handle_cec_message(struct cros_ec_cec *cros_ec_cec)
-{
-	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
-	uint8_t *cec_message = cros_ec->event_data.data.cec_message;
-	unsigned int len = cros_ec->event_size;
-
-	cros_ec_cec->rx_msg.len = len;
-	memcpy(cros_ec_cec->rx_msg.msg, cec_message, len);
-
-	cec_received_msg(cros_ec_cec->adap, &cros_ec_cec->rx_msg);
-}
-
-static void handle_cec_event(struct cros_ec_cec *cros_ec_cec)
-{
-	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
-	uint32_t events = cros_ec->event_data.data.cec_events;
-
-	if (events & EC_MKBP_CEC_SEND_OK)
-		cec_transmit_attempt_done(cros_ec_cec->adap,
-					  CEC_TX_STATUS_OK);
-
-	/* FW takes care of all retries, tell core to avoid more retries */
-	if (events & EC_MKBP_CEC_SEND_FAILED)
-		cec_transmit_attempt_done(cros_ec_cec->adap,
-					  CEC_TX_STATUS_MAX_RETRIES |
-					  CEC_TX_STATUS_NACK);
-}
-
-static int cros_ec_cec_event(struct notifier_block *nb,
-			     unsigned long queued_during_suspend,
-			     void *_notify)
-{
-	struct cros_ec_cec *cros_ec_cec;
-	struct cros_ec_device *cros_ec;
-
-	cros_ec_cec = container_of(nb, struct cros_ec_cec, notifier);
-	cros_ec = cros_ec_cec->cros_ec;
-
-	if (cros_ec->event_data.event_type == EC_MKBP_EVENT_CEC_EVENT) {
-		handle_cec_event(cros_ec_cec);
-		return NOTIFY_OK;
-	}
-
-	if (cros_ec->event_data.event_type == EC_MKBP_EVENT_CEC_MESSAGE) {
-		handle_cec_message(cros_ec_cec);
-		return NOTIFY_OK;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static int cros_ec_cec_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
-{
-	struct cros_ec_cec *cros_ec_cec = adap->priv;
-	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
-	struct {
-		struct cros_ec_command msg;
-		struct ec_params_cec_set data;
-	} __packed msg = {};
-	int ret;
-
-	msg.msg.command = EC_CMD_CEC_SET;
-	msg.msg.outsize = sizeof(msg.data);
-	msg.data.cmd = CEC_CMD_LOGICAL_ADDRESS;
-	msg.data.val = logical_addr;
-
-	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
-	if (ret < 0) {
-		dev_err(cros_ec->dev,
-			"error setting CEC logical address on EC: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int cros_ec_cec_transmit(struct cec_adapter *adap, u8 attempts,
-				u32 signal_free_time, struct cec_msg *cec_msg)
-{
-	struct cros_ec_cec *cros_ec_cec = adap->priv;
-	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
-	struct {
-		struct cros_ec_command msg;
-		struct ec_params_cec_write data;
-	} __packed msg = {};
-	int ret;
-
-	msg.msg.command = EC_CMD_CEC_WRITE_MSG;
-	msg.msg.outsize = cec_msg->len;
-	memcpy(msg.data.msg, cec_msg->msg, cec_msg->len);
-
-	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
-	if (ret < 0) {
-		dev_err(cros_ec->dev,
-			"error writing CEC msg on EC: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int cros_ec_cec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct cros_ec_cec *cros_ec_cec = adap->priv;
-	struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
-	struct {
-		struct cros_ec_command msg;
-		struct ec_params_cec_set data;
-	} __packed msg = {};
-	int ret;
-
-	msg.msg.command = EC_CMD_CEC_SET;
-	msg.msg.outsize = sizeof(msg.data);
-	msg.data.cmd = CEC_CMD_ENABLE;
-	msg.data.val = enable;
-
-	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
-	if (ret < 0) {
-		dev_err(cros_ec->dev,
-			"error %sabling CEC on EC: %d\n",
-			(enable ? "en" : "dis"), ret);
-		return ret;
-	}
-
-	return 0;
-}
-
-static const struct cec_adap_ops cros_ec_cec_ops = {
-	.adap_enable = cros_ec_cec_adap_enable,
-	.adap_log_addr = cros_ec_cec_set_log_addr,
-	.adap_transmit = cros_ec_cec_transmit,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int cros_ec_cec_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct cros_ec_cec *cros_ec_cec = dev_get_drvdata(&pdev->dev);
-
-	if (device_may_wakeup(dev))
-		enable_irq_wake(cros_ec_cec->cros_ec->irq);
-
-	return 0;
-}
-
-static int cros_ec_cec_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct cros_ec_cec *cros_ec_cec = dev_get_drvdata(&pdev->dev);
-
-	if (device_may_wakeup(dev))
-		disable_irq_wake(cros_ec_cec->cros_ec->irq);
-
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(cros_ec_cec_pm_ops,
-	cros_ec_cec_suspend, cros_ec_cec_resume);
-
-#if IS_ENABLED(CONFIG_PCI) && IS_ENABLED(CONFIG_DMI)
-
-/*
- * The Firmware only handles a single CEC interface tied to a single HDMI
- * connector we specify along with the DRM device name handling the HDMI output
- */
-
-struct cec_dmi_match {
-	const char *sys_vendor;
-	const char *product_name;
-	const char *devname;
-	const char *conn;
-};
-
-static const struct cec_dmi_match cec_dmi_match_table[] = {
-	/* Google Fizz */
-	{ "Google", "Fizz", "0000:00:02.0", "Port B" },
-};
-
-static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
-						const char **conn)
-{
-	int i;
-
-	for (i = 0 ; i < ARRAY_SIZE(cec_dmi_match_table) ; ++i) {
-		const struct cec_dmi_match *m = &cec_dmi_match_table[i];
-
-		if (dmi_match(DMI_SYS_VENDOR, m->sys_vendor) &&
-		    dmi_match(DMI_PRODUCT_NAME, m->product_name)) {
-			struct device *d;
-
-			/* Find the device, bail out if not yet registered */
-			d = bus_find_device_by_name(&pci_bus_type, NULL,
-						    m->devname);
-			if (!d)
-				return ERR_PTR(-EPROBE_DEFER);
-			put_device(d);
-			*conn = m->conn;
-			return d;
-		}
-	}
-
-	/* Hardware support must be added in the cec_dmi_match_table */
-	dev_warn(dev, "CEC notifier not configured for this hardware\n");
-
-	return ERR_PTR(-ENODEV);
-}
-
-#else
-
-static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
-						const char **conn)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-#endif
-
-static int cros_ec_cec_probe(struct platform_device *pdev)
-{
-	struct cros_ec_dev *ec_dev = dev_get_drvdata(pdev->dev.parent);
-	struct cros_ec_device *cros_ec = ec_dev->ec_dev;
-	struct cros_ec_cec *cros_ec_cec;
-	struct device *hdmi_dev;
-	const char *conn = NULL;
-	int ret;
-
-	hdmi_dev = cros_ec_cec_find_hdmi_dev(&pdev->dev, &conn);
-	if (IS_ERR(hdmi_dev))
-		return PTR_ERR(hdmi_dev);
-
-	cros_ec_cec = devm_kzalloc(&pdev->dev, sizeof(*cros_ec_cec),
-				   GFP_KERNEL);
-	if (!cros_ec_cec)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, cros_ec_cec);
-	cros_ec_cec->cros_ec = cros_ec;
-
-	ret = device_init_wakeup(&pdev->dev, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize wakeup\n");
-		return ret;
-	}
-
-	cros_ec_cec->adap = cec_allocate_adapter(&cros_ec_cec_ops, cros_ec_cec,
-						 DRV_NAME,
-						 CEC_CAP_DEFAULTS |
-						 CEC_CAP_CONNECTOR_INFO, 1);
-	if (IS_ERR(cros_ec_cec->adap))
-		return PTR_ERR(cros_ec_cec->adap);
-
-	cros_ec_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, conn,
-							     cros_ec_cec->adap);
-	if (!cros_ec_cec->notify) {
-		ret = -ENOMEM;
-		goto out_probe_adapter;
-	}
-
-	/* Get CEC events from the EC. */
-	cros_ec_cec->notifier.notifier_call = cros_ec_cec_event;
-	ret = blocking_notifier_chain_register(&cros_ec->event_notifier,
-					       &cros_ec_cec->notifier);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register notifier\n");
-		goto out_probe_notify;
-	}
-
-	ret = cec_register_adapter(cros_ec_cec->adap, &pdev->dev);
-	if (ret < 0)
-		goto out_probe_notify;
-
-	return 0;
-
-out_probe_notify:
-	cec_notifier_cec_adap_unregister(cros_ec_cec->notify,
-					 cros_ec_cec->adap);
-out_probe_adapter:
-	cec_delete_adapter(cros_ec_cec->adap);
-	return ret;
-}
-
-static int cros_ec_cec_remove(struct platform_device *pdev)
-{
-	struct cros_ec_cec *cros_ec_cec = platform_get_drvdata(pdev);
-	struct device *dev = &pdev->dev;
-	int ret;
-
-	ret = blocking_notifier_chain_unregister(
-			&cros_ec_cec->cros_ec->event_notifier,
-			&cros_ec_cec->notifier);
-
-	if (ret) {
-		dev_err(dev, "failed to unregister notifier\n");
-		return ret;
-	}
-
-	cec_notifier_cec_adap_unregister(cros_ec_cec->notify,
-					 cros_ec_cec->adap);
-	cec_unregister_adapter(cros_ec_cec->adap);
-
-	return 0;
-}
-
-static struct platform_driver cros_ec_cec_driver = {
-	.probe = cros_ec_cec_probe,
-	.remove  = cros_ec_cec_remove,
-	.driver = {
-		.name = DRV_NAME,
-		.pm = &cros_ec_cec_pm_ops,
-	},
-};
-
-module_platform_driver(cros_ec_cec_driver);
-
-MODULE_DESCRIPTION("CEC driver for ChromeOS ECs");
-MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
index ead14c49d4f5..7d55fd45240e 100644
--- a/drivers/media/platform/davinci/vpif_display.c
+++ b/drivers/media/platform/davinci/vpif_display.c
@@ -1225,7 +1225,6 @@ static int vpif_probe_complete(void)
 probe_out:
 	for (k = 0; k < j; k++) {
 		ch = vpif_obj.dev[k];
-		common = &ch->common[k];
 		video_unregister_device(&ch->video_dev);
 	}
 	return err;
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index be4effcbfe7b..136d3b2a0fbb 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -2,9 +2,10 @@
 
 config VIDEO_SAMSUNG_EXYNOS4_IS
 	tristate "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && OF && COMMON_CLK
 	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
-	depends on OF && COMMON_CLK
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
 	help
 	  Say Y here to enable camera host interface devices for
diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c
index 37fdcc53a1c4..9a09a10a3631 100644
--- a/drivers/media/platform/marvell-ccic/cafe-driver.c
+++ b/drivers/media/platform/marvell-ccic/cafe-driver.c
@@ -556,7 +556,7 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 	clkdev_create(mcam->mclk, "xclk", "%d-%04x",
 		i2c_adapter_id(cam->i2c_adapter), ov7670_info.addr);
 
-	if (i2c_new_device(cam->i2c_adapter, &ov7670_info)) {
+	if (!IS_ERR(i2c_new_client_device(cam->i2c_adapter, &ov7670_info))) {
 		cam->registered = 1;
 		return 0;
 	}
diff --git a/drivers/media/platform/meson/Makefile b/drivers/media/platform/meson/Makefile
deleted file mode 100644
index 6bf728addbf8..000000000000
--- a/drivers/media/platform/meson/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_MESON_AO_CEC)	+= ao-cec.o
-obj-$(CONFIG_VIDEO_MESON_G12A_AO_CEC)	+= ao-cec-g12a.o
diff --git a/drivers/media/platform/meson/ao-cec-g12a.c b/drivers/media/platform/meson/ao-cec-g12a.c
deleted file mode 100644
index 891533060d49..000000000000
--- a/drivers/media/platform/meson/ao-cec-g12a.c
+++ /dev/null
@@ -1,796 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Driver for Amlogic Meson AO CEC G12A Controller
- *
- * Copyright (C) 2017 Amlogic, Inc. All rights reserved
- * Copyright (C) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <linux/bitfield.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/reset.h>
-#include <linux/slab.h>
-#include <linux/regmap.h>
-#include <media/cec.h>
-#include <media/cec-notifier.h>
-#include <linux/clk-provider.h>
-
-/* CEC Registers */
-
-#define CECB_CLK_CNTL_REG0		0x00
-
-#define CECB_CLK_CNTL_N1		GENMASK(11, 0)
-#define CECB_CLK_CNTL_N2		GENMASK(23, 12)
-#define CECB_CLK_CNTL_DUAL_EN		BIT(28)
-#define CECB_CLK_CNTL_OUTPUT_EN		BIT(30)
-#define CECB_CLK_CNTL_INPUT_EN		BIT(31)
-
-#define CECB_CLK_CNTL_REG1		0x04
-
-#define CECB_CLK_CNTL_M1		GENMASK(11, 0)
-#define CECB_CLK_CNTL_M2		GENMASK(23, 12)
-#define CECB_CLK_CNTL_BYPASS_EN		BIT(24)
-
-/*
- * [14:12] Filter_del. For glitch-filtering CEC line, ignore signal
- *       change pulse width < filter_del * T(filter_tick) * 3.
- * [9:8] Filter_tick_sel: Select which periodical pulse for
- *       glitch-filtering CEC line signal.
- *  - 0=Use T(xtal)*3 = 125ns;
- *  - 1=Use once-per-1us pulse;
- *  - 2=Use once-per-10us pulse;
- *  - 3=Use once-per-100us pulse.
- * [3]   Sysclk_en. 0=Disable system clock; 1=Enable system clock.
- * [2:1] cntl_clk
- *  - 0 = Disable clk (Power-off mode)
- *  - 1 = Enable gated clock (Normal mode)
- *  - 2 = Enable free-run clk (Debug mode)
- * [0] SW_RESET 1=Apply reset; 0=No reset.
- */
-#define CECB_GEN_CNTL_REG		0x08
-
-#define CECB_GEN_CNTL_RESET		BIT(0)
-#define CECB_GEN_CNTL_CLK_DISABLE	0
-#define CECB_GEN_CNTL_CLK_ENABLE	1
-#define CECB_GEN_CNTL_CLK_ENABLE_DBG	2
-#define CECB_GEN_CNTL_CLK_CTRL_MASK	GENMASK(2, 1)
-#define CECB_GEN_CNTL_SYS_CLK_EN	BIT(3)
-#define CECB_GEN_CNTL_FILTER_TICK_125NS	0
-#define CECB_GEN_CNTL_FILTER_TICK_1US	1
-#define CECB_GEN_CNTL_FILTER_TICK_10US	2
-#define CECB_GEN_CNTL_FILTER_TICK_100US	3
-#define CECB_GEN_CNTL_FILTER_TICK_SEL	GENMASK(9, 8)
-#define CECB_GEN_CNTL_FILTER_DEL	GENMASK(14, 12)
-
-/*
- * [7:0] cec_reg_addr
- * [15:8] cec_reg_wrdata
- * [16] cec_reg_wr
- *  - 0 = Read
- *  - 1 = Write
- * [31:24] cec_reg_rddata
- */
-#define CECB_RW_REG			0x0c
-
-#define CECB_RW_ADDR			GENMASK(7, 0)
-#define CECB_RW_WR_DATA			GENMASK(15, 8)
-#define CECB_RW_WRITE_EN		BIT(16)
-#define CECB_RW_BUS_BUSY		BIT(23)
-#define CECB_RW_RD_DATA			GENMASK(31, 24)
-
-/*
- * [0] DONE Interrupt
- * [1] End Of Message Interrupt
- * [2] Not Acknowlegde Interrupt
- * [3] Arbitration Loss Interrupt
- * [4] Initiator Error Interrupt
- * [5] Follower Error Interrupt
- * [6] Wake-Up Interrupt
- */
-#define CECB_INTR_MASKN_REG		0x10
-#define CECB_INTR_CLR_REG		0x14
-#define CECB_INTR_STAT_REG		0x18
-
-#define CECB_INTR_DONE			BIT(0)
-#define CECB_INTR_EOM			BIT(1)
-#define CECB_INTR_NACK			BIT(2)
-#define CECB_INTR_ARB_LOSS		BIT(3)
-#define CECB_INTR_INITIATOR_ERR		BIT(4)
-#define CECB_INTR_FOLLOWER_ERR		BIT(5)
-#define CECB_INTR_WAKE_UP		BIT(6)
-
-/* CEC Commands */
-
-#define CECB_CTRL		0x00
-
-#define CECB_CTRL_SEND		BIT(0)
-#define CECB_CTRL_TYPE		GENMASK(2, 1)
-#define CECB_CTRL_TYPE_RETRY	0
-#define CECB_CTRL_TYPE_NEW	1
-#define CECB_CTRL_TYPE_NEXT	2
-
-#define CECB_CTRL2		0x01
-
-#define CECB_CTRL2_RISE_DEL_MAX	GENMASK(4, 0)
-
-#define CECB_INTR_MASK		0x02
-#define CECB_LADD_LOW		0x05
-#define CECB_LADD_HIGH		0x06
-#define CECB_TX_CNT		0x07
-#define CECB_RX_CNT		0x08
-#define CECB_STAT0		0x09
-#define CECB_TX_DATA00		0x10
-#define CECB_TX_DATA01		0x11
-#define CECB_TX_DATA02		0x12
-#define CECB_TX_DATA03		0x13
-#define CECB_TX_DATA04		0x14
-#define CECB_TX_DATA05		0x15
-#define CECB_TX_DATA06		0x16
-#define CECB_TX_DATA07		0x17
-#define CECB_TX_DATA08		0x18
-#define CECB_TX_DATA09		0x19
-#define CECB_TX_DATA10		0x1A
-#define CECB_TX_DATA11		0x1B
-#define CECB_TX_DATA12		0x1C
-#define CECB_TX_DATA13		0x1D
-#define CECB_TX_DATA14		0x1E
-#define CECB_TX_DATA15		0x1F
-#define CECB_RX_DATA00		0x20
-#define CECB_RX_DATA01		0x21
-#define CECB_RX_DATA02		0x22
-#define CECB_RX_DATA03		0x23
-#define CECB_RX_DATA04		0x24
-#define CECB_RX_DATA05		0x25
-#define CECB_RX_DATA06		0x26
-#define CECB_RX_DATA07		0x27
-#define CECB_RX_DATA08		0x28
-#define CECB_RX_DATA09		0x29
-#define CECB_RX_DATA10		0x2A
-#define CECB_RX_DATA11		0x2B
-#define CECB_RX_DATA12		0x2C
-#define CECB_RX_DATA13		0x2D
-#define CECB_RX_DATA14		0x2E
-#define CECB_RX_DATA15		0x2F
-#define CECB_LOCK_BUF		0x30
-
-#define CECB_LOCK_BUF_EN	BIT(0)
-
-#define CECB_WAKEUPCTRL		0x31
-
-struct meson_ao_cec_g12a_data {
-	/* Setup the internal CECB_CTRL2 register */
-	bool				ctrl2_setup;
-};
-
-struct meson_ao_cec_g12a_device {
-	struct platform_device		*pdev;
-	struct regmap			*regmap;
-	struct regmap			*regmap_cec;
-	spinlock_t			cec_reg_lock;
-	struct cec_notifier		*notify;
-	struct cec_adapter		*adap;
-	struct cec_msg			rx_msg;
-	struct clk			*oscin;
-	struct clk			*core;
-	const struct meson_ao_cec_g12a_data *data;
-};
-
-static const struct regmap_config meson_ao_cec_g12a_regmap_conf = {
-	.reg_bits = 8,
-	.val_bits = 32,
-	.reg_stride = 4,
-	.max_register = CECB_INTR_STAT_REG,
-};
-
-/*
- * The AO-CECB embeds a dual/divider to generate a more precise
- * 32,768KHz clock for CEC core clock.
- *                      ______   ______
- *                     |      | |      |
- *         ______      | Div1 |-| Cnt1 |       ______
- *        |      |    /|______| |______|\     |      |
- * Xtal-->| Gate |---|  ______   ______  X-X--| Gate |-->
- *        |______| |  \|      | |      |/  |  |______|
- *                 |   | Div2 |-| Cnt2 |   |
- *                 |   |______| |______|   |
- *                 |_______________________|
- *
- * The dividing can be switched to single or dual, with a counter
- * for each divider to set when the switching is done.
- * The entire dividing mechanism can be also bypassed.
- */
-
-struct meson_ao_cec_g12a_dualdiv_clk {
-	struct clk_hw hw;
-	struct regmap *regmap;
-};
-
-#define hw_to_meson_ao_cec_g12a_dualdiv_clk(_hw)			\
-	container_of(_hw, struct meson_ao_cec_g12a_dualdiv_clk, hw)	\
-
-static unsigned long
-meson_ao_cec_g12a_dualdiv_clk_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
-{
-	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
-		hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
-	unsigned long n1;
-	u32 reg0, reg1;
-
-	regmap_read(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0, &reg0);
-	regmap_read(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0, &reg1);
-
-	if (reg1 & CECB_CLK_CNTL_BYPASS_EN)
-		return parent_rate;
-
-	if (reg0 & CECB_CLK_CNTL_DUAL_EN) {
-		unsigned long n2, m1, m2, f1, f2, p1, p2;
-
-		n1 = FIELD_GET(CECB_CLK_CNTL_N1, reg0) + 1;
-		n2 = FIELD_GET(CECB_CLK_CNTL_N2, reg0) + 1;
-
-		m1 = FIELD_GET(CECB_CLK_CNTL_M1, reg1) + 1;
-		m2 = FIELD_GET(CECB_CLK_CNTL_M1, reg1) + 1;
-
-		f1 = DIV_ROUND_CLOSEST(parent_rate, n1);
-		f2 = DIV_ROUND_CLOSEST(parent_rate, n2);
-
-		p1 = DIV_ROUND_CLOSEST(100000000 * m1, f1 * (m1 + m2));
-		p2 = DIV_ROUND_CLOSEST(100000000 * m2, f2 * (m1 + m2));
-
-		return DIV_ROUND_UP(100000000, p1 + p2);
-	}
-
-	n1 = FIELD_GET(CECB_CLK_CNTL_N1, reg0) + 1;
-
-	return DIV_ROUND_CLOSEST(parent_rate, n1);
-}
-
-static int meson_ao_cec_g12a_dualdiv_clk_enable(struct clk_hw *hw)
-{
-	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
-		hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
-
-
-	/* Disable Input & Output */
-	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
-			   CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN,
-			   0);
-
-	/* Set N1 & N2 */
-	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
-			   CECB_CLK_CNTL_N1,
-			   FIELD_PREP(CECB_CLK_CNTL_N1, 733 - 1));
-
-	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
-			   CECB_CLK_CNTL_N2,
-			   FIELD_PREP(CECB_CLK_CNTL_N2, 732 - 1));
-
-	/* Set M1 & M2 */
-	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG1,
-			   CECB_CLK_CNTL_M1,
-			   FIELD_PREP(CECB_CLK_CNTL_M1, 8 - 1));
-
-	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG1,
-			   CECB_CLK_CNTL_M2,
-			   FIELD_PREP(CECB_CLK_CNTL_M2, 11 - 1));
-
-	/* Enable Dual divisor */
-	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
-			   CECB_CLK_CNTL_DUAL_EN, CECB_CLK_CNTL_DUAL_EN);
-
-	/* Disable divisor bypass */
-	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG1,
-			   CECB_CLK_CNTL_BYPASS_EN, 0);
-
-	/* Enable Input & Output */
-	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
-			   CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN,
-			   CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN);
-
-	return 0;
-}
-
-static void meson_ao_cec_g12a_dualdiv_clk_disable(struct clk_hw *hw)
-{
-	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
-		hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
-
-	regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
-			   CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN,
-			   0);
-}
-
-static int meson_ao_cec_g12a_dualdiv_clk_is_enabled(struct clk_hw *hw)
-{
-	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
-		hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
-	int val;
-
-	regmap_read(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0, &val);
-
-	return !!(val & (CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN));
-}
-
-static const struct clk_ops meson_ao_cec_g12a_dualdiv_clk_ops = {
-	.recalc_rate	= meson_ao_cec_g12a_dualdiv_clk_recalc_rate,
-	.is_enabled	= meson_ao_cec_g12a_dualdiv_clk_is_enabled,
-	.enable		= meson_ao_cec_g12a_dualdiv_clk_enable,
-	.disable	= meson_ao_cec_g12a_dualdiv_clk_disable,
-};
-
-static int meson_ao_cec_g12a_setup_clk(struct meson_ao_cec_g12a_device *ao_cec)
-{
-	struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk;
-	struct device *dev = &ao_cec->pdev->dev;
-	struct clk_init_data init;
-	const char *parent_name;
-	struct clk *clk;
-	char *name;
-
-	dualdiv_clk = devm_kzalloc(dev, sizeof(*dualdiv_clk), GFP_KERNEL);
-	if (!dualdiv_clk)
-		return -ENOMEM;
-
-	name = kasprintf(GFP_KERNEL, "%s#dualdiv_clk", dev_name(dev));
-	if (!name)
-		return -ENOMEM;
-
-	parent_name = __clk_get_name(ao_cec->oscin);
-
-	init.name = name;
-	init.ops = &meson_ao_cec_g12a_dualdiv_clk_ops;
-	init.flags = 0;
-	init.parent_names = &parent_name;
-	init.num_parents = 1;
-	dualdiv_clk->regmap = ao_cec->regmap;
-	dualdiv_clk->hw.init = &init;
-
-	clk = devm_clk_register(dev, &dualdiv_clk->hw);
-	kfree(name);
-	if (IS_ERR(clk)) {
-		dev_err(dev, "failed to register clock\n");
-		return PTR_ERR(clk);
-	}
-
-	ao_cec->core = clk;
-
-	return 0;
-}
-
-static int meson_ao_cec_g12a_read(void *context, unsigned int addr,
-				  unsigned int *data)
-{
-	struct meson_ao_cec_g12a_device *ao_cec = context;
-	u32 reg = FIELD_PREP(CECB_RW_ADDR, addr);
-	int ret = 0;
-
-	ret = regmap_write(ao_cec->regmap, CECB_RW_REG, reg);
-	if (ret)
-		return ret;
-
-	ret = regmap_read_poll_timeout(ao_cec->regmap, CECB_RW_REG, reg,
-				       !(reg & CECB_RW_BUS_BUSY),
-				       5, 1000);
-	if (ret)
-		return ret;
-
-	ret = regmap_read(ao_cec->regmap, CECB_RW_REG, &reg);
-
-	*data = FIELD_GET(CECB_RW_RD_DATA, reg);
-
-	return ret;
-}
-
-static int meson_ao_cec_g12a_write(void *context, unsigned int addr,
-				   unsigned int data)
-{
-	struct meson_ao_cec_g12a_device *ao_cec = context;
-	u32 reg = FIELD_PREP(CECB_RW_ADDR, addr) |
-		  FIELD_PREP(CECB_RW_WR_DATA, data) |
-		  CECB_RW_WRITE_EN;
-
-	return regmap_write(ao_cec->regmap, CECB_RW_REG, reg);
-}
-
-static const struct regmap_config meson_ao_cec_g12a_cec_regmap_conf = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.reg_read = meson_ao_cec_g12a_read,
-	.reg_write = meson_ao_cec_g12a_write,
-	.max_register = 0xffff,
-};
-
-static inline void
-meson_ao_cec_g12a_irq_setup(struct meson_ao_cec_g12a_device *ao_cec,
-			    bool enable)
-{
-	u32 cfg = CECB_INTR_DONE | CECB_INTR_EOM | CECB_INTR_NACK |
-		  CECB_INTR_ARB_LOSS | CECB_INTR_INITIATOR_ERR |
-		  CECB_INTR_FOLLOWER_ERR;
-
-	regmap_write(ao_cec->regmap, CECB_INTR_MASKN_REG,
-		     enable ? cfg : 0);
-}
-
-static void meson_ao_cec_g12a_irq_rx(struct meson_ao_cec_g12a_device *ao_cec)
-{
-	int i, ret = 0;
-	u32 val;
-
-	ret = regmap_read(ao_cec->regmap_cec, CECB_RX_CNT, &val);
-
-	ao_cec->rx_msg.len = val;
-	if (ao_cec->rx_msg.len > CEC_MAX_MSG_SIZE)
-		ao_cec->rx_msg.len = CEC_MAX_MSG_SIZE;
-
-	for (i = 0; i < ao_cec->rx_msg.len; i++) {
-		ret |= regmap_read(ao_cec->regmap_cec,
-				   CECB_RX_DATA00 + i, &val);
-
-		ao_cec->rx_msg.msg[i] = val & 0xff;
-	}
-
-	ret |= regmap_write(ao_cec->regmap_cec, CECB_LOCK_BUF, 0);
-	if (ret)
-		return;
-
-	cec_received_msg(ao_cec->adap, &ao_cec->rx_msg);
-}
-
-static irqreturn_t meson_ao_cec_g12a_irq(int irq, void *data)
-{
-	struct meson_ao_cec_g12a_device *ao_cec = data;
-	u32 stat;
-
-	regmap_read(ao_cec->regmap, CECB_INTR_STAT_REG, &stat);
-	if (stat)
-		return IRQ_WAKE_THREAD;
-
-	return IRQ_NONE;
-}
-
-static irqreturn_t meson_ao_cec_g12a_irq_thread(int irq, void *data)
-{
-	struct meson_ao_cec_g12a_device *ao_cec = data;
-	u32 stat;
-
-	regmap_read(ao_cec->regmap, CECB_INTR_STAT_REG, &stat);
-	regmap_write(ao_cec->regmap, CECB_INTR_CLR_REG, stat);
-
-	if (stat & CECB_INTR_DONE)
-		cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_OK);
-
-	if (stat & CECB_INTR_EOM)
-		meson_ao_cec_g12a_irq_rx(ao_cec);
-
-	if (stat & CECB_INTR_NACK)
-		cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_NACK);
-
-	if (stat & CECB_INTR_ARB_LOSS) {
-		regmap_write(ao_cec->regmap_cec, CECB_TX_CNT, 0);
-		regmap_update_bits(ao_cec->regmap_cec, CECB_CTRL,
-				   CECB_CTRL_SEND | CECB_CTRL_TYPE, 0);
-		cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_ARB_LOST);
-	}
-
-	/* Initiator reports an error on the CEC bus */
-	if (stat & CECB_INTR_INITIATOR_ERR)
-		cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_ERROR);
-
-	/* Follower reports a receive error, just reset RX buffer */
-	if (stat & CECB_INTR_FOLLOWER_ERR)
-		regmap_write(ao_cec->regmap_cec, CECB_LOCK_BUF, 0);
-
-	return IRQ_HANDLED;
-}
-
-static int
-meson_ao_cec_g12a_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
-{
-	struct meson_ao_cec_g12a_device *ao_cec = adap->priv;
-	int ret = 0;
-
-	if (logical_addr == CEC_LOG_ADDR_INVALID) {
-		/* Assume this will allways succeed */
-		regmap_write(ao_cec->regmap_cec, CECB_LADD_LOW, 0);
-		regmap_write(ao_cec->regmap_cec, CECB_LADD_HIGH, 0);
-
-		return 0;
-	} else if (logical_addr < 8) {
-		ret = regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_LOW,
-					 BIT(logical_addr),
-					 BIT(logical_addr));
-	} else {
-		ret = regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_HIGH,
-					 BIT(logical_addr - 8),
-					 BIT(logical_addr - 8));
-	}
-
-	/* Always set Broadcast/Unregistered 15 address */
-	ret |= regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_HIGH,
-				  BIT(CEC_LOG_ADDR_UNREGISTERED - 8),
-				  BIT(CEC_LOG_ADDR_UNREGISTERED - 8));
-
-	return ret ? -EIO : 0;
-}
-
-static int meson_ao_cec_g12a_transmit(struct cec_adapter *adap, u8 attempts,
-				 u32 signal_free_time, struct cec_msg *msg)
-{
-	struct meson_ao_cec_g12a_device *ao_cec = adap->priv;
-	unsigned int type;
-	int ret = 0;
-	u32 val;
-	int i;
-
-	/* Check if RX is in progress */
-	ret = regmap_read(ao_cec->regmap_cec, CECB_LOCK_BUF, &val);
-	if (ret)
-		return ret;
-	if (val & CECB_LOCK_BUF_EN)
-		return -EBUSY;
-
-	/* Check if TX Busy */
-	ret = regmap_read(ao_cec->regmap_cec, CECB_CTRL, &val);
-	if (ret)
-		return ret;
-	if (val & CECB_CTRL_SEND)
-		return -EBUSY;
-
-	switch (signal_free_time) {
-	case CEC_SIGNAL_FREE_TIME_RETRY:
-		type = CECB_CTRL_TYPE_RETRY;
-		break;
-	case CEC_SIGNAL_FREE_TIME_NEXT_XFER:
-		type = CECB_CTRL_TYPE_NEXT;
-		break;
-	case CEC_SIGNAL_FREE_TIME_NEW_INITIATOR:
-	default:
-		type = CECB_CTRL_TYPE_NEW;
-		break;
-	}
-
-	for (i = 0; i < msg->len; i++)
-		ret |= regmap_write(ao_cec->regmap_cec, CECB_TX_DATA00 + i,
-				    msg->msg[i]);
-
-	ret |= regmap_write(ao_cec->regmap_cec, CECB_TX_CNT, msg->len);
-	if (ret)
-		return -EIO;
-
-	ret = regmap_update_bits(ao_cec->regmap_cec, CECB_CTRL,
-				 CECB_CTRL_SEND |
-				 CECB_CTRL_TYPE,
-				 CECB_CTRL_SEND |
-				 FIELD_PREP(CECB_CTRL_TYPE, type));
-
-	return ret;
-}
-
-static int meson_ao_cec_g12a_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct meson_ao_cec_g12a_device *ao_cec = adap->priv;
-
-	meson_ao_cec_g12a_irq_setup(ao_cec, false);
-
-	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
-			   CECB_GEN_CNTL_RESET, CECB_GEN_CNTL_RESET);
-
-	if (!enable)
-		return 0;
-
-	/* Setup Filter */
-	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
-			   CECB_GEN_CNTL_FILTER_TICK_SEL |
-			   CECB_GEN_CNTL_FILTER_DEL,
-			   FIELD_PREP(CECB_GEN_CNTL_FILTER_TICK_SEL,
-				      CECB_GEN_CNTL_FILTER_TICK_1US) |
-			   FIELD_PREP(CECB_GEN_CNTL_FILTER_DEL, 7));
-
-	/* Enable System Clock */
-	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
-			   CECB_GEN_CNTL_SYS_CLK_EN,
-			   CECB_GEN_CNTL_SYS_CLK_EN);
-
-	/* Enable gated clock (Normal mode). */
-	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
-			   CECB_GEN_CNTL_CLK_CTRL_MASK,
-			    FIELD_PREP(CECB_GEN_CNTL_CLK_CTRL_MASK,
-				       CECB_GEN_CNTL_CLK_ENABLE));
-
-	/* Release Reset */
-	regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
-			   CECB_GEN_CNTL_RESET, 0);
-
-	if (ao_cec->data->ctrl2_setup)
-		regmap_write(ao_cec->regmap_cec, CECB_CTRL2,
-			     FIELD_PREP(CECB_CTRL2_RISE_DEL_MAX, 2));
-
-	meson_ao_cec_g12a_irq_setup(ao_cec, true);
-
-	return 0;
-}
-
-static const struct cec_adap_ops meson_ao_cec_g12a_ops = {
-	.adap_enable = meson_ao_cec_g12a_adap_enable,
-	.adap_log_addr = meson_ao_cec_g12a_set_log_addr,
-	.adap_transmit = meson_ao_cec_g12a_transmit,
-};
-
-static int meson_ao_cec_g12a_probe(struct platform_device *pdev)
-{
-	struct meson_ao_cec_g12a_device *ao_cec;
-	struct device *hdmi_dev;
-	struct resource *res;
-	void __iomem *base;
-	int ret, irq;
-
-	hdmi_dev = cec_notifier_parse_hdmi_phandle(&pdev->dev);
-	if (IS_ERR(hdmi_dev))
-		return PTR_ERR(hdmi_dev);
-
-	ao_cec = devm_kzalloc(&pdev->dev, sizeof(*ao_cec), GFP_KERNEL);
-	if (!ao_cec)
-		return -ENOMEM;
-
-	ao_cec->data = of_device_get_match_data(&pdev->dev);
-	if (!ao_cec->data) {
-		dev_err(&pdev->dev, "failed to get match data\n");
-		return -ENODEV;
-	}
-
-	spin_lock_init(&ao_cec->cec_reg_lock);
-	ao_cec->pdev = pdev;
-
-	ao_cec->adap = cec_allocate_adapter(&meson_ao_cec_g12a_ops, ao_cec,
-					    "meson_g12a_ao_cec",
-					    CEC_CAP_DEFAULTS |
-					    CEC_CAP_CONNECTOR_INFO,
-					    CEC_MAX_LOG_ADDRS);
-	if (IS_ERR(ao_cec->adap))
-		return PTR_ERR(ao_cec->adap);
-
-	ao_cec->adap->owner = THIS_MODULE;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(base)) {
-		ret = PTR_ERR(base);
-		goto out_probe_adapter;
-	}
-
-	ao_cec->regmap = devm_regmap_init_mmio(&pdev->dev, base,
-					       &meson_ao_cec_g12a_regmap_conf);
-	if (IS_ERR(ao_cec->regmap)) {
-		ret = PTR_ERR(ao_cec->regmap);
-		goto out_probe_adapter;
-	}
-
-	ao_cec->regmap_cec = devm_regmap_init(&pdev->dev, NULL, ao_cec,
-					   &meson_ao_cec_g12a_cec_regmap_conf);
-	if (IS_ERR(ao_cec->regmap_cec)) {
-		ret = PTR_ERR(ao_cec->regmap_cec);
-		goto out_probe_adapter;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	ret = devm_request_threaded_irq(&pdev->dev, irq,
-					meson_ao_cec_g12a_irq,
-					meson_ao_cec_g12a_irq_thread,
-					0, NULL, ao_cec);
-	if (ret) {
-		dev_err(&pdev->dev, "irq request failed\n");
-		goto out_probe_adapter;
-	}
-
-	ao_cec->oscin = devm_clk_get(&pdev->dev, "oscin");
-	if (IS_ERR(ao_cec->oscin)) {
-		dev_err(&pdev->dev, "oscin clock request failed\n");
-		ret = PTR_ERR(ao_cec->oscin);
-		goto out_probe_adapter;
-	}
-
-	ret = meson_ao_cec_g12a_setup_clk(ao_cec);
-	if (ret)
-		goto out_probe_adapter;
-
-	ret = clk_prepare_enable(ao_cec->core);
-	if (ret) {
-		dev_err(&pdev->dev, "core clock enable failed\n");
-		goto out_probe_adapter;
-	}
-
-	device_reset_optional(&pdev->dev);
-
-	platform_set_drvdata(pdev, ao_cec);
-
-	ao_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, NULL,
-							ao_cec->adap);
-	if (!ao_cec->notify) {
-		ret = -ENOMEM;
-		goto out_probe_core_clk;
-	}
-
-	ret = cec_register_adapter(ao_cec->adap, &pdev->dev);
-	if (ret < 0)
-		goto out_probe_notify;
-
-	/* Setup Hardware */
-	regmap_write(ao_cec->regmap, CECB_GEN_CNTL_REG, CECB_GEN_CNTL_RESET);
-
-	return 0;
-
-out_probe_notify:
-	cec_notifier_cec_adap_unregister(ao_cec->notify, ao_cec->adap);
-
-out_probe_core_clk:
-	clk_disable_unprepare(ao_cec->core);
-
-out_probe_adapter:
-	cec_delete_adapter(ao_cec->adap);
-
-	dev_err(&pdev->dev, "CEC controller registration failed\n");
-
-	return ret;
-}
-
-static int meson_ao_cec_g12a_remove(struct platform_device *pdev)
-{
-	struct meson_ao_cec_g12a_device *ao_cec = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(ao_cec->core);
-
-	cec_notifier_cec_adap_unregister(ao_cec->notify, ao_cec->adap);
-
-	cec_unregister_adapter(ao_cec->adap);
-
-	return 0;
-}
-
-static const struct meson_ao_cec_g12a_data ao_cec_g12a_data = {
-	.ctrl2_setup = false,
-};
-
-static const struct meson_ao_cec_g12a_data ao_cec_sm1_data = {
-	.ctrl2_setup = true,
-};
-
-static const struct of_device_id meson_ao_cec_g12a_of_match[] = {
-	{
-		.compatible = "amlogic,meson-g12a-ao-cec",
-		.data = &ao_cec_g12a_data,
-	},
-	{
-		.compatible = "amlogic,meson-sm1-ao-cec",
-		.data = &ao_cec_sm1_data,
-	},
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, meson_ao_cec_g12a_of_match);
-
-static struct platform_driver meson_ao_cec_g12a_driver = {
-	.probe   = meson_ao_cec_g12a_probe,
-	.remove  = meson_ao_cec_g12a_remove,
-	.driver  = {
-		.name = "meson-ao-cec-g12a",
-		.of_match_table = of_match_ptr(meson_ao_cec_g12a_of_match),
-	},
-};
-
-module_platform_driver(meson_ao_cec_g12a_driver);
-
-MODULE_DESCRIPTION("Meson AO CEC G12A Controller driver");
-MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/meson/ao-cec.c b/drivers/media/platform/meson/ao-cec.c
deleted file mode 100644
index 09aff82c3773..000000000000
--- a/drivers/media/platform/meson/ao-cec.c
+++ /dev/null
@@ -1,732 +0,0 @@
-/*
- * Driver for Amlogic Meson AO CEC Controller
- *
- * Copyright (C) 2015 Amlogic, Inc. All rights reserved
- * Copyright (C) 2017 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/bitfield.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/reset.h>
-#include <media/cec.h>
-#include <media/cec-notifier.h>
-
-/* CEC Registers */
-
-/*
- * [2:1] cntl_clk
- *  - 0 = Disable clk (Power-off mode)
- *  - 1 = Enable gated clock (Normal mode)
- *  - 2 = Enable free-run clk (Debug mode)
- */
-#define CEC_GEN_CNTL_REG		0x00
-
-#define CEC_GEN_CNTL_RESET		BIT(0)
-#define CEC_GEN_CNTL_CLK_DISABLE	0
-#define CEC_GEN_CNTL_CLK_ENABLE		1
-#define CEC_GEN_CNTL_CLK_ENABLE_DBG	2
-#define CEC_GEN_CNTL_CLK_CTRL_MASK	GENMASK(2, 1)
-
-/*
- * [7:0] cec_reg_addr
- * [15:8] cec_reg_wrdata
- * [16] cec_reg_wr
- *  - 0 = Read
- *  - 1 = Write
- * [23] bus free
- * [31:24] cec_reg_rddata
- */
-#define CEC_RW_REG			0x04
-
-#define CEC_RW_ADDR			GENMASK(7, 0)
-#define CEC_RW_WR_DATA			GENMASK(15, 8)
-#define CEC_RW_WRITE_EN			BIT(16)
-#define CEC_RW_BUS_BUSY			BIT(23)
-#define CEC_RW_RD_DATA			GENMASK(31, 24)
-
-/*
- * [1] tx intr
- * [2] rx intr
- */
-#define CEC_INTR_MASKN_REG		0x08
-#define CEC_INTR_CLR_REG		0x0c
-#define CEC_INTR_STAT_REG		0x10
-
-#define CEC_INTR_TX			BIT(1)
-#define CEC_INTR_RX			BIT(2)
-
-/* CEC Commands */
-
-#define CEC_TX_MSG_0_HEADER		0x00
-#define CEC_TX_MSG_1_OPCODE		0x01
-#define CEC_TX_MSG_2_OP1		0x02
-#define CEC_TX_MSG_3_OP2		0x03
-#define CEC_TX_MSG_4_OP3		0x04
-#define CEC_TX_MSG_5_OP4		0x05
-#define CEC_TX_MSG_6_OP5		0x06
-#define CEC_TX_MSG_7_OP6		0x07
-#define CEC_TX_MSG_8_OP7		0x08
-#define CEC_TX_MSG_9_OP8		0x09
-#define CEC_TX_MSG_A_OP9		0x0A
-#define CEC_TX_MSG_B_OP10		0x0B
-#define CEC_TX_MSG_C_OP11		0x0C
-#define CEC_TX_MSG_D_OP12		0x0D
-#define CEC_TX_MSG_E_OP13		0x0E
-#define CEC_TX_MSG_F_OP14		0x0F
-#define CEC_TX_MSG_LENGTH		0x10
-#define CEC_TX_MSG_CMD			0x11
-#define CEC_TX_WRITE_BUF		0x12
-#define CEC_TX_CLEAR_BUF		0x13
-#define CEC_RX_MSG_CMD			0x14
-#define CEC_RX_CLEAR_BUF		0x15
-#define CEC_LOGICAL_ADDR0		0x16
-#define CEC_LOGICAL_ADDR1		0x17
-#define CEC_LOGICAL_ADDR2		0x18
-#define CEC_LOGICAL_ADDR3		0x19
-#define CEC_LOGICAL_ADDR4		0x1A
-#define CEC_CLOCK_DIV_H			0x1B
-#define CEC_CLOCK_DIV_L			0x1C
-#define CEC_QUIESCENT_25MS_BIT7_0	0x20
-#define CEC_QUIESCENT_25MS_BIT11_8	0x21
-#define CEC_STARTBITMINL2H_3MS5_BIT7_0	0x22
-#define CEC_STARTBITMINL2H_3MS5_BIT8	0x23
-#define CEC_STARTBITMAXL2H_3MS9_BIT7_0	0x24
-#define CEC_STARTBITMAXL2H_3MS9_BIT8	0x25
-#define CEC_STARTBITMINH_0MS6_BIT7_0	0x26
-#define CEC_STARTBITMINH_0MS6_BIT8	0x27
-#define CEC_STARTBITMAXH_1MS0_BIT7_0	0x28
-#define CEC_STARTBITMAXH_1MS0_BIT8	0x29
-#define CEC_STARTBITMINTOT_4MS3_BIT7_0	0x2A
-#define CEC_STARTBITMINTOT_4MS3_BIT9_8	0x2B
-#define CEC_STARTBITMAXTOT_4MS7_BIT7_0	0x2C
-#define CEC_STARTBITMAXTOT_4MS7_BIT9_8	0x2D
-#define CEC_LOGIC1MINL2H_0MS4_BIT7_0	0x2E
-#define CEC_LOGIC1MINL2H_0MS4_BIT8	0x2F
-#define CEC_LOGIC1MAXL2H_0MS8_BIT7_0	0x30
-#define CEC_LOGIC1MAXL2H_0MS8_BIT8	0x31
-#define CEC_LOGIC0MINL2H_1MS3_BIT7_0	0x32
-#define CEC_LOGIC0MINL2H_1MS3_BIT8	0x33
-#define CEC_LOGIC0MAXL2H_1MS7_BIT7_0	0x34
-#define CEC_LOGIC0MAXL2H_1MS7_BIT8	0x35
-#define CEC_LOGICMINTOTAL_2MS05_BIT7_0	0x36
-#define CEC_LOGICMINTOTAL_2MS05_BIT9_8	0x37
-#define CEC_LOGICMAXHIGH_2MS8_BIT7_0	0x38
-#define CEC_LOGICMAXHIGH_2MS8_BIT8	0x39
-#define CEC_LOGICERRLOW_3MS4_BIT7_0	0x3A
-#define CEC_LOGICERRLOW_3MS4_BIT8	0x3B
-#define CEC_NOMSMPPOINT_1MS05		0x3C
-#define CEC_DELCNTR_LOGICERR		0x3E
-#define CEC_TXTIME_17MS_BIT7_0		0x40
-#define CEC_TXTIME_17MS_BIT10_8		0x41
-#define CEC_TXTIME_2BIT_BIT7_0		0x42
-#define CEC_TXTIME_2BIT_BIT10_8		0x43
-#define CEC_TXTIME_4BIT_BIT7_0		0x44
-#define CEC_TXTIME_4BIT_BIT10_8		0x45
-#define CEC_STARTBITNOML2H_3MS7_BIT7_0	0x46
-#define CEC_STARTBITNOML2H_3MS7_BIT8	0x47
-#define CEC_STARTBITNOMH_0MS8_BIT7_0	0x48
-#define CEC_STARTBITNOMH_0MS8_BIT8	0x49
-#define CEC_LOGIC1NOML2H_0MS6_BIT7_0	0x4A
-#define CEC_LOGIC1NOML2H_0MS6_BIT8	0x4B
-#define CEC_LOGIC0NOML2H_1MS5_BIT7_0	0x4C
-#define CEC_LOGIC0NOML2H_1MS5_BIT8	0x4D
-#define CEC_LOGIC1NOMH_1MS8_BIT7_0	0x4E
-#define CEC_LOGIC1NOMH_1MS8_BIT8	0x4F
-#define CEC_LOGIC0NOMH_0MS9_BIT7_0	0x50
-#define CEC_LOGIC0NOMH_0MS9_BIT8	0x51
-#define CEC_LOGICERRLOW_3MS6_BIT7_0	0x52
-#define CEC_LOGICERRLOW_3MS6_BIT8	0x53
-#define CEC_CHKCONTENTION_0MS1		0x54
-#define CEC_PREPARENXTBIT_0MS05_BIT7_0	0x56
-#define CEC_PREPARENXTBIT_0MS05_BIT8	0x57
-#define CEC_NOMSMPACKPOINT_0MS45	0x58
-#define CEC_ACK0NOML2H_1MS5_BIT7_0	0x5A
-#define CEC_ACK0NOML2H_1MS5_BIT8	0x5B
-#define CEC_BUGFIX_DISABLE_0		0x60
-#define CEC_BUGFIX_DISABLE_1		0x61
-#define CEC_RX_MSG_0_HEADER		0x80
-#define CEC_RX_MSG_1_OPCODE		0x81
-#define CEC_RX_MSG_2_OP1		0x82
-#define CEC_RX_MSG_3_OP2		0x83
-#define CEC_RX_MSG_4_OP3		0x84
-#define CEC_RX_MSG_5_OP4		0x85
-#define CEC_RX_MSG_6_OP5		0x86
-#define CEC_RX_MSG_7_OP6		0x87
-#define CEC_RX_MSG_8_OP7		0x88
-#define CEC_RX_MSG_9_OP8		0x89
-#define CEC_RX_MSG_A_OP9		0x8A
-#define CEC_RX_MSG_B_OP10		0x8B
-#define CEC_RX_MSG_C_OP11		0x8C
-#define CEC_RX_MSG_D_OP12		0x8D
-#define CEC_RX_MSG_E_OP13		0x8E
-#define CEC_RX_MSG_F_OP14		0x8F
-#define CEC_RX_MSG_LENGTH		0x90
-#define CEC_RX_MSG_STATUS		0x91
-#define CEC_RX_NUM_MSG			0x92
-#define CEC_TX_MSG_STATUS		0x93
-#define CEC_TX_NUM_MSG			0x94
-
-
-/* CEC_TX_MSG_CMD definition */
-#define TX_NO_OP	0  /* No transaction */
-#define TX_REQ_CURRENT	1  /* Transmit earliest message in buffer */
-#define TX_ABORT	2  /* Abort transmitting earliest message */
-#define TX_REQ_NEXT	3  /* Overwrite earliest msg, transmit next */
-
-/* tx_msg_status definition */
-#define TX_IDLE		0  /* No transaction */
-#define TX_BUSY		1  /* Transmitter is busy */
-#define TX_DONE		2  /* Message successfully transmitted */
-#define TX_ERROR	3  /* Message transmitted with error */
-
-/* rx_msg_cmd */
-#define RX_NO_OP	0  /* No transaction */
-#define RX_ACK_CURRENT	1  /* Read earliest message in buffer */
-#define RX_DISABLE	2  /* Disable receiving latest message */
-#define RX_ACK_NEXT	3  /* Clear earliest msg, read next */
-
-/* rx_msg_status */
-#define RX_IDLE		0  /* No transaction */
-#define RX_BUSY		1  /* Receiver is busy */
-#define RX_DONE		2  /* Message has been received successfully */
-#define RX_ERROR	3  /* Message has been received with error */
-
-/* RX_CLEAR_BUF options */
-#define CLEAR_START	1
-#define CLEAR_STOP	0
-
-/* CEC_LOGICAL_ADDRx options */
-#define LOGICAL_ADDR_MASK	0xf
-#define LOGICAL_ADDR_VALID	BIT(4)
-#define LOGICAL_ADDR_DISABLE	0
-
-#define CEC_CLK_RATE		32768
-
-struct meson_ao_cec_device {
-	struct platform_device		*pdev;
-	void __iomem			*base;
-	struct clk			*core;
-	spinlock_t			cec_reg_lock;
-	struct cec_notifier		*notify;
-	struct cec_adapter		*adap;
-	struct cec_msg			rx_msg;
-};
-
-#define writel_bits_relaxed(mask, val, addr) \
-	writel_relaxed((readl_relaxed(addr) & ~(mask)) | (val), addr)
-
-static inline int meson_ao_cec_wait_busy(struct meson_ao_cec_device *ao_cec)
-{
-	ktime_t timeout = ktime_add_us(ktime_get(), 5000);
-
-	while (readl_relaxed(ao_cec->base + CEC_RW_REG) & CEC_RW_BUS_BUSY) {
-		if (ktime_compare(ktime_get(), timeout) > 0)
-			return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static void meson_ao_cec_read(struct meson_ao_cec_device *ao_cec,
-			     unsigned long address, u8 *data,
-			     int *res)
-{
-	unsigned long flags;
-	u32 reg = FIELD_PREP(CEC_RW_ADDR, address);
-	int ret = 0;
-
-	if (res && *res)
-		return;
-
-	spin_lock_irqsave(&ao_cec->cec_reg_lock, flags);
-
-	ret = meson_ao_cec_wait_busy(ao_cec);
-	if (ret)
-		goto read_out;
-
-	writel_relaxed(reg, ao_cec->base + CEC_RW_REG);
-
-	ret = meson_ao_cec_wait_busy(ao_cec);
-	if (ret)
-		goto read_out;
-
-	*data = FIELD_GET(CEC_RW_RD_DATA,
-			  readl_relaxed(ao_cec->base + CEC_RW_REG));
-
-read_out:
-	spin_unlock_irqrestore(&ao_cec->cec_reg_lock, flags);
-
-	if (res)
-		*res = ret;
-}
-
-static void meson_ao_cec_write(struct meson_ao_cec_device *ao_cec,
-			       unsigned long address, u8 data,
-			       int *res)
-{
-	unsigned long flags;
-	u32 reg = FIELD_PREP(CEC_RW_ADDR, address) |
-		  FIELD_PREP(CEC_RW_WR_DATA, data) |
-		  CEC_RW_WRITE_EN;
-	int ret = 0;
-
-	if (res && *res)
-		return;
-
-	spin_lock_irqsave(&ao_cec->cec_reg_lock, flags);
-
-	ret = meson_ao_cec_wait_busy(ao_cec);
-	if (ret)
-		goto write_out;
-
-	writel_relaxed(reg, ao_cec->base + CEC_RW_REG);
-
-write_out:
-	spin_unlock_irqrestore(&ao_cec->cec_reg_lock, flags);
-
-	if (res)
-		*res = ret;
-}
-
-static inline void meson_ao_cec_irq_setup(struct meson_ao_cec_device *ao_cec,
-				      bool enable)
-{
-	u32 cfg = CEC_INTR_TX | CEC_INTR_RX;
-
-	writel_bits_relaxed(cfg, enable ? cfg : 0,
-			    ao_cec->base + CEC_INTR_MASKN_REG);
-}
-
-static inline int meson_ao_cec_clear(struct meson_ao_cec_device *ao_cec)
-{
-	int ret = 0;
-
-	meson_ao_cec_write(ao_cec, CEC_RX_MSG_CMD, RX_DISABLE, &ret);
-	meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_ABORT, &ret);
-	meson_ao_cec_write(ao_cec, CEC_RX_CLEAR_BUF, 1, &ret);
-	meson_ao_cec_write(ao_cec, CEC_TX_CLEAR_BUF, 1, &ret);
-	if (ret)
-		return ret;
-
-	udelay(100);
-
-	meson_ao_cec_write(ao_cec, CEC_RX_CLEAR_BUF, 0, &ret);
-	meson_ao_cec_write(ao_cec, CEC_TX_CLEAR_BUF, 0, &ret);
-	if (ret)
-		return ret;
-
-	udelay(100);
-
-	meson_ao_cec_write(ao_cec, CEC_RX_MSG_CMD, RX_NO_OP, &ret);
-	meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_NO_OP, &ret);
-
-	return ret;
-}
-
-static int meson_ao_cec_arbit_bit_time_set(struct meson_ao_cec_device *ao_cec,
-					   unsigned int bit_set,
-					   unsigned int time_set)
-{
-	int ret = 0;
-
-	switch (bit_set) {
-	case CEC_SIGNAL_FREE_TIME_RETRY:
-		meson_ao_cec_write(ao_cec, CEC_TXTIME_4BIT_BIT7_0,
-				   time_set & 0xff, &ret);
-		meson_ao_cec_write(ao_cec, CEC_TXTIME_4BIT_BIT10_8,
-				   (time_set >> 8) & 0x7, &ret);
-		break;
-
-	case CEC_SIGNAL_FREE_TIME_NEW_INITIATOR:
-		meson_ao_cec_write(ao_cec, CEC_TXTIME_2BIT_BIT7_0,
-				   time_set & 0xff, &ret);
-		meson_ao_cec_write(ao_cec, CEC_TXTIME_2BIT_BIT10_8,
-				   (time_set >> 8) & 0x7, &ret);
-		break;
-
-	case CEC_SIGNAL_FREE_TIME_NEXT_XFER:
-		meson_ao_cec_write(ao_cec, CEC_TXTIME_17MS_BIT7_0,
-				   time_set & 0xff, &ret);
-		meson_ao_cec_write(ao_cec, CEC_TXTIME_17MS_BIT10_8,
-				   (time_set >> 8) & 0x7, &ret);
-		break;
-	}
-
-	return ret;
-}
-
-static irqreturn_t meson_ao_cec_irq(int irq, void *data)
-{
-	struct meson_ao_cec_device *ao_cec = data;
-	u32 stat = readl_relaxed(ao_cec->base + CEC_INTR_STAT_REG);
-
-	if (stat)
-		return IRQ_WAKE_THREAD;
-
-	return IRQ_NONE;
-}
-
-static void meson_ao_cec_irq_tx(struct meson_ao_cec_device *ao_cec)
-{
-	unsigned long tx_status = 0;
-	u8 stat;
-	int ret = 0;
-
-	meson_ao_cec_read(ao_cec, CEC_TX_MSG_STATUS, &stat, &ret);
-	if (ret)
-		goto tx_reg_err;
-
-	switch (stat) {
-	case TX_DONE:
-		tx_status = CEC_TX_STATUS_OK;
-		break;
-
-	case TX_BUSY:
-		tx_status = CEC_TX_STATUS_ARB_LOST;
-		break;
-
-	case TX_IDLE:
-		tx_status = CEC_TX_STATUS_LOW_DRIVE;
-		break;
-
-	case TX_ERROR:
-	default:
-		tx_status = CEC_TX_STATUS_NACK;
-		break;
-	}
-
-	/* Clear Interruption */
-	writel_relaxed(CEC_INTR_TX, ao_cec->base + CEC_INTR_CLR_REG);
-
-	/* Stop TX */
-	meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_NO_OP, &ret);
-	if (ret)
-		goto tx_reg_err;
-
-	cec_transmit_attempt_done(ao_cec->adap, tx_status);
-	return;
-
-tx_reg_err:
-	cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_ERROR);
-}
-
-static void meson_ao_cec_irq_rx(struct meson_ao_cec_device *ao_cec)
-{
-	int i, ret = 0;
-	u8 reg;
-
-	meson_ao_cec_read(ao_cec, CEC_RX_MSG_STATUS, &reg, &ret);
-	if (reg != RX_DONE)
-		goto rx_out;
-
-	meson_ao_cec_read(ao_cec, CEC_RX_NUM_MSG, &reg, &ret);
-	if (reg != 1)
-		goto rx_out;
-
-	meson_ao_cec_read(ao_cec, CEC_RX_MSG_LENGTH, &reg, &ret);
-
-	ao_cec->rx_msg.len = reg + 1;
-	if (ao_cec->rx_msg.len > CEC_MAX_MSG_SIZE)
-		ao_cec->rx_msg.len = CEC_MAX_MSG_SIZE;
-
-	for (i = 0; i < ao_cec->rx_msg.len; i++) {
-		u8 byte;
-
-		meson_ao_cec_read(ao_cec, CEC_RX_MSG_0_HEADER + i, &byte, &ret);
-
-		ao_cec->rx_msg.msg[i] = byte;
-	}
-
-	if (ret)
-		goto rx_out;
-
-	cec_received_msg(ao_cec->adap, &ao_cec->rx_msg);
-
-rx_out:
-	/* Clear Interruption */
-	writel_relaxed(CEC_INTR_RX, ao_cec->base + CEC_INTR_CLR_REG);
-
-	/* Ack RX message */
-	meson_ao_cec_write(ao_cec, CEC_RX_MSG_CMD, RX_ACK_CURRENT, &ret);
-	meson_ao_cec_write(ao_cec, CEC_RX_MSG_CMD, RX_NO_OP, &ret);
-
-	/* Clear RX buffer */
-	meson_ao_cec_write(ao_cec, CEC_RX_CLEAR_BUF, CLEAR_START, &ret);
-	meson_ao_cec_write(ao_cec, CEC_RX_CLEAR_BUF, CLEAR_STOP, &ret);
-}
-
-static irqreturn_t meson_ao_cec_irq_thread(int irq, void *data)
-{
-	struct meson_ao_cec_device *ao_cec = data;
-	u32 stat = readl_relaxed(ao_cec->base + CEC_INTR_STAT_REG);
-
-	if (stat & CEC_INTR_TX)
-		meson_ao_cec_irq_tx(ao_cec);
-
-	meson_ao_cec_irq_rx(ao_cec);
-
-	return IRQ_HANDLED;
-}
-
-static int meson_ao_cec_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
-{
-	struct meson_ao_cec_device *ao_cec = adap->priv;
-	int ret = 0;
-
-	meson_ao_cec_write(ao_cec, CEC_LOGICAL_ADDR0,
-			   LOGICAL_ADDR_DISABLE, &ret);
-	if (ret)
-		return ret;
-
-	ret = meson_ao_cec_clear(ao_cec);
-	if (ret)
-		return ret;
-
-	if (logical_addr == CEC_LOG_ADDR_INVALID)
-		return 0;
-
-	meson_ao_cec_write(ao_cec, CEC_LOGICAL_ADDR0,
-			   logical_addr & LOGICAL_ADDR_MASK, &ret);
-	if (ret)
-		return ret;
-
-	udelay(100);
-
-	meson_ao_cec_write(ao_cec, CEC_LOGICAL_ADDR0,
-			   (logical_addr & LOGICAL_ADDR_MASK) |
-			   LOGICAL_ADDR_VALID, &ret);
-
-	return ret;
-}
-
-static int meson_ao_cec_transmit(struct cec_adapter *adap, u8 attempts,
-				 u32 signal_free_time, struct cec_msg *msg)
-{
-	struct meson_ao_cec_device *ao_cec = adap->priv;
-	int i, ret = 0;
-	u8 reg;
-
-	meson_ao_cec_read(ao_cec, CEC_TX_MSG_STATUS, &reg, &ret);
-	if (ret)
-		return ret;
-
-	if (reg == TX_BUSY) {
-		dev_dbg(&ao_cec->pdev->dev, "%s: busy TX: aborting\n",
-			__func__);
-		meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_ABORT, &ret);
-	}
-
-	for (i = 0; i < msg->len; i++) {
-		meson_ao_cec_write(ao_cec, CEC_TX_MSG_0_HEADER + i,
-				   msg->msg[i], &ret);
-	}
-
-	meson_ao_cec_write(ao_cec, CEC_TX_MSG_LENGTH, msg->len - 1, &ret);
-	meson_ao_cec_write(ao_cec, CEC_TX_MSG_CMD, TX_REQ_CURRENT, &ret);
-
-	return ret;
-}
-
-static int meson_ao_cec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct meson_ao_cec_device *ao_cec = adap->priv;
-	int ret;
-
-	meson_ao_cec_irq_setup(ao_cec, false);
-
-	writel_bits_relaxed(CEC_GEN_CNTL_RESET, CEC_GEN_CNTL_RESET,
-			    ao_cec->base + CEC_GEN_CNTL_REG);
-
-	if (!enable)
-		return 0;
-
-	/* Enable gated clock (Normal mode). */
-	writel_bits_relaxed(CEC_GEN_CNTL_CLK_CTRL_MASK,
-			    FIELD_PREP(CEC_GEN_CNTL_CLK_CTRL_MASK,
-				       CEC_GEN_CNTL_CLK_ENABLE),
-			    ao_cec->base + CEC_GEN_CNTL_REG);
-
-	udelay(100);
-
-	/* Release Reset */
-	writel_bits_relaxed(CEC_GEN_CNTL_RESET, 0,
-			    ao_cec->base + CEC_GEN_CNTL_REG);
-
-	/* Clear buffers */
-	ret = meson_ao_cec_clear(ao_cec);
-	if (ret)
-		return ret;
-
-	/* CEC arbitration 3/5/7 bit time set. */
-	ret = meson_ao_cec_arbit_bit_time_set(ao_cec,
-					CEC_SIGNAL_FREE_TIME_RETRY,
-					0x118);
-	if (ret)
-		return ret;
-	ret = meson_ao_cec_arbit_bit_time_set(ao_cec,
-					CEC_SIGNAL_FREE_TIME_NEW_INITIATOR,
-					0x000);
-	if (ret)
-		return ret;
-	ret = meson_ao_cec_arbit_bit_time_set(ao_cec,
-					CEC_SIGNAL_FREE_TIME_NEXT_XFER,
-					0x2aa);
-	if (ret)
-		return ret;
-
-	meson_ao_cec_irq_setup(ao_cec, true);
-
-	return 0;
-}
-
-static const struct cec_adap_ops meson_ao_cec_ops = {
-	.adap_enable = meson_ao_cec_adap_enable,
-	.adap_log_addr = meson_ao_cec_set_log_addr,
-	.adap_transmit = meson_ao_cec_transmit,
-};
-
-static int meson_ao_cec_probe(struct platform_device *pdev)
-{
-	struct meson_ao_cec_device *ao_cec;
-	struct device *hdmi_dev;
-	struct resource *res;
-	int ret, irq;
-
-	hdmi_dev = cec_notifier_parse_hdmi_phandle(&pdev->dev);
-
-	if (IS_ERR(hdmi_dev))
-		return PTR_ERR(hdmi_dev);
-
-	ao_cec = devm_kzalloc(&pdev->dev, sizeof(*ao_cec), GFP_KERNEL);
-	if (!ao_cec)
-		return -ENOMEM;
-
-	spin_lock_init(&ao_cec->cec_reg_lock);
-
-	ao_cec->adap = cec_allocate_adapter(&meson_ao_cec_ops, ao_cec,
-					    "meson_ao_cec",
-					    CEC_CAP_DEFAULTS |
-					    CEC_CAP_CONNECTOR_INFO,
-					    1); /* Use 1 for now */
-	if (IS_ERR(ao_cec->adap))
-		return PTR_ERR(ao_cec->adap);
-
-	ao_cec->adap->owner = THIS_MODULE;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ao_cec->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(ao_cec->base)) {
-		ret = PTR_ERR(ao_cec->base);
-		goto out_probe_adapter;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	ret = devm_request_threaded_irq(&pdev->dev, irq,
-					meson_ao_cec_irq,
-					meson_ao_cec_irq_thread,
-					0, NULL, ao_cec);
-	if (ret) {
-		dev_err(&pdev->dev, "irq request failed\n");
-		goto out_probe_adapter;
-	}
-
-	ao_cec->core = devm_clk_get(&pdev->dev, "core");
-	if (IS_ERR(ao_cec->core)) {
-		dev_err(&pdev->dev, "core clock request failed\n");
-		ret = PTR_ERR(ao_cec->core);
-		goto out_probe_adapter;
-	}
-
-	ret = clk_prepare_enable(ao_cec->core);
-	if (ret) {
-		dev_err(&pdev->dev, "core clock enable failed\n");
-		goto out_probe_adapter;
-	}
-
-	ret = clk_set_rate(ao_cec->core, CEC_CLK_RATE);
-	if (ret) {
-		dev_err(&pdev->dev, "core clock set rate failed\n");
-		goto out_probe_clk;
-	}
-
-	device_reset_optional(&pdev->dev);
-
-	ao_cec->pdev = pdev;
-	platform_set_drvdata(pdev, ao_cec);
-
-	ao_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, NULL,
-							ao_cec->adap);
-	if (!ao_cec->notify) {
-		ret = -ENOMEM;
-		goto out_probe_clk;
-	}
-
-	ret = cec_register_adapter(ao_cec->adap, &pdev->dev);
-	if (ret < 0)
-		goto out_probe_notify;
-
-	/* Setup Hardware */
-	writel_relaxed(CEC_GEN_CNTL_RESET,
-		       ao_cec->base + CEC_GEN_CNTL_REG);
-
-	return 0;
-
-out_probe_notify:
-	cec_notifier_cec_adap_unregister(ao_cec->notify, ao_cec->adap);
-
-out_probe_clk:
-	clk_disable_unprepare(ao_cec->core);
-
-out_probe_adapter:
-	cec_delete_adapter(ao_cec->adap);
-
-	dev_err(&pdev->dev, "CEC controller registration failed\n");
-
-	return ret;
-}
-
-static int meson_ao_cec_remove(struct platform_device *pdev)
-{
-	struct meson_ao_cec_device *ao_cec = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(ao_cec->core);
-
-	cec_notifier_cec_adap_unregister(ao_cec->notify, ao_cec->adap);
-	cec_unregister_adapter(ao_cec->adap);
-
-	return 0;
-}
-
-static const struct of_device_id meson_ao_cec_of_match[] = {
-	{ .compatible = "amlogic,meson-gx-ao-cec", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, meson_ao_cec_of_match);
-
-static struct platform_driver meson_ao_cec_driver = {
-	.probe   = meson_ao_cec_probe,
-	.remove  = meson_ao_cec_remove,
-	.driver  = {
-		.name = "meson-ao-cec",
-		.of_match_table = of_match_ptr(meson_ao_cec_of_match),
-	},
-};
-
-module_platform_driver(meson_ao_cec_driver);
-
-MODULE_DESCRIPTION("Meson AO CEC Controller driver");
-MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index 14991685adb7..58abfbdfb82d 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -15,10 +15,10 @@
 
 
 static const char * const mtk_mdp_comp_stem[MTK_MDP_COMP_TYPE_MAX] = {
-	"mdp_rdma",
-	"mdp_rsz",
-	"mdp_wdma",
-	"mdp_wrot",
+	"mdp-rdma",
+	"mdp-rsz",
+	"mdp-wdma",
+	"mdp-wrot",
 };
 
 struct mtk_mdp_comp_match {
diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index 70c85a2a10f5..3c5fe737d36f 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -1016,7 +1016,7 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev,
  *  - a videobuffer is queued on the pcdev->capture list
  *
  * Please check the "DMA hot chaining timeslice issue" in
- *   Documentation/media/v4l-drivers/pxa_camera.rst
+ *   Documentation/driver-api/media/drivers/pxa_camera.rst
  *
  * Context: should only be called within the dma irq handler
  */
@@ -1438,7 +1438,7 @@ static void pxac_vb2_queue(struct vb2_buffer *vb)
 
 /*
  * Please check the DMA prepared buffer structure in :
- *   Documentation/media/v4l-drivers/pxa_camera.rst
+ *   Documentation/driver-api/media/drivers/pxa_camera.rst
  * Please check also in pxa_camera_check_link_miss() to understand why DMA chain
  * modification while DMA chain is running will work anyway.
  */
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 194b10b98767..4395cb96fb04 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -210,6 +210,8 @@ static int venus_probe(struct platform_device *pdev)
 	if (!core->res)
 		return -ENODEV;
 
+	mutex_init(&core->pm_lock);
+
 	core->pm_ops = venus_pm_get(core->res->hfi_version);
 	if (!core->pm_ops)
 		return -ENODEV;
@@ -242,10 +244,6 @@ static int venus_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = icc_set_bw(core->cpucfg_path, 0, kbps_to_icc(1000));
-	if (ret)
-		return ret;
-
 	ret = hfi_create(core, &venus_core_ops);
 	if (ret)
 		return ret;
@@ -336,6 +334,7 @@ static int venus_remove(struct platform_device *pdev)
 	icc_put(core->cpucfg_path);
 
 	v4l2_device_unregister(&core->v4l2_dev);
+	mutex_destroy(&core->pm_lock);
 
 	return ret;
 }
@@ -350,6 +349,10 @@ static __maybe_unused int venus_runtime_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
+	ret = icc_set_bw(core->cpucfg_path, 0, 0);
+	if (ret)
+		return ret;
+
 	if (pm_ops->core_power)
 		ret = pm_ops->core_power(dev, POWER_OFF);
 
@@ -368,6 +371,10 @@ static __maybe_unused int venus_runtime_resume(struct device *dev)
 			return ret;
 	}
 
+	ret = icc_set_bw(core->cpucfg_path, 0, kbps_to_icc(1000));
+	if (ret)
+		return ret;
+
 	return hfi_core_resume(core, false);
 }
 
diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
index bd3ac6a4501f..3ab644a39786 100644
--- a/drivers/media/platform/qcom/venus/core.h
+++ b/drivers/media/platform/qcom/venus/core.h
@@ -128,6 +128,7 @@ struct venus_caps {
  * @error:	an error returned during last HFI sync operations
  * @sys_error:	an error flag that signal system error event
  * @core_ops:	the core operations
+ * @pm_lock:	a lock for PM operations
  * @enc_codecs:	encoders supported by this core
  * @dec_codecs:	decoders supported by this core
  * @max_sessions_supported:	holds the maximum number of sessions
@@ -168,6 +169,7 @@ struct venus_core {
 	bool sys_error;
 	const struct hfi_core_ops *core_ops;
 	const struct venus_pm_ops *pm_ops;
+	struct mutex pm_lock;
 	unsigned long enc_codecs;
 	unsigned long dec_codecs;
 	unsigned int max_sessions_supported;
diff --git a/drivers/media/platform/qcom/venus/hfi_cmds.h b/drivers/media/platform/qcom/venus/hfi_cmds.h
index cae9d5d61c0c..83705e237f1c 100644
--- a/drivers/media/platform/qcom/venus/hfi_cmds.h
+++ b/drivers/media/platform/qcom/venus/hfi_cmds.h
@@ -107,7 +107,7 @@ struct hfi_session_abort_pkt {
 struct hfi_session_set_property_pkt {
 	struct hfi_session_hdr_pkt shdr;
 	u32 num_properties;
-	u32 data[0];
+	u32 data[];
 };
 
 struct hfi_session_set_buffers_pkt {
diff --git a/drivers/media/platform/qcom/venus/hfi_msgs.h b/drivers/media/platform/qcom/venus/hfi_msgs.h
index 7694b1d25d9d..526d9f5b487b 100644
--- a/drivers/media/platform/qcom/venus/hfi_msgs.h
+++ b/drivers/media/platform/qcom/venus/hfi_msgs.h
@@ -155,7 +155,7 @@ struct hfi_msg_session_empty_buffer_done_pkt {
 	u32 input_tag;
 	u32 packet_buffer;
 	u32 extradata_buffer;
-	u32 data[0];
+	u32 data[];
 };
 
 struct hfi_msg_session_fbd_compressed_pkt {
@@ -175,7 +175,7 @@ struct hfi_msg_session_fbd_compressed_pkt {
 	u32 picture_type;
 	u32 packet_buffer;
 	u32 extradata_buffer;
-	u32 data[0];
+	u32 data[];
 };
 
 struct hfi_msg_session_fbd_uncompressed_plane0_pkt {
@@ -202,7 +202,7 @@ struct hfi_msg_session_fbd_uncompressed_plane0_pkt {
 	u32 picture_type;
 	u32 packet_buffer;
 	u32 extradata_buffer;
-	u32 data[0];
+	u32 data[];
 };
 
 struct hfi_msg_session_fbd_uncompressed_plane1_pkt {
@@ -211,7 +211,7 @@ struct hfi_msg_session_fbd_uncompressed_plane1_pkt {
 	u32 filled_len;
 	u32 offset;
 	u32 packet_buffer2;
-	u32 data[0];
+	u32 data[];
 };
 
 struct hfi_msg_session_fbd_uncompressed_plane2_pkt {
@@ -220,7 +220,7 @@ struct hfi_msg_session_fbd_uncompressed_plane2_pkt {
 	u32 filled_len;
 	u32 offset;
 	u32 packet_buffer3;
-	u32 data[0];
+	u32 data[];
 };
 
 struct hfi_msg_session_parse_sequence_header_done_pkt {
diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c
index 4ed2628585a1..e8e1ecf7cf4a 100644
--- a/drivers/media/platform/qcom/venus/vdec.c
+++ b/drivers/media/platform/qcom/venus/vdec.c
@@ -545,6 +545,64 @@ static const struct v4l2_ioctl_ops vdec_ioctl_ops = {
 	.vidioc_decoder_cmd = vdec_decoder_cmd,
 };
 
+static int vdec_pm_get(struct venus_inst *inst)
+{
+	struct venus_core *core = inst->core;
+	struct device *dev = core->dev_dec;
+	int ret;
+
+	mutex_lock(&core->pm_lock);
+	ret = pm_runtime_get_sync(dev);
+	mutex_unlock(&core->pm_lock);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int vdec_pm_put(struct venus_inst *inst, bool autosuspend)
+{
+	struct venus_core *core = inst->core;
+	struct device *dev = core->dev_dec;
+	int ret;
+
+	mutex_lock(&core->pm_lock);
+
+	if (autosuspend)
+		ret = pm_runtime_put_autosuspend(dev);
+	else
+		ret = pm_runtime_put_sync(dev);
+
+	mutex_unlock(&core->pm_lock);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int vdec_pm_get_put(struct venus_inst *inst)
+{
+	struct venus_core *core = inst->core;
+	struct device *dev = core->dev_dec;
+	int ret = 0;
+
+	mutex_lock(&core->pm_lock);
+
+	if (pm_runtime_suspended(dev)) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto error;
+
+		ret = pm_runtime_put_autosuspend(dev);
+	}
+
+error:
+	mutex_unlock(&core->pm_lock);
+
+	return ret < 0 ? ret : 0;
+}
+
+static void vdec_pm_touch(struct venus_inst *inst)
+{
+	pm_runtime_mark_last_busy(inst->core->dev_dec);
+}
+
 static int vdec_set_properties(struct venus_inst *inst)
 {
 	struct vdec_controls *ctr = &inst->controls.dec;
@@ -746,11 +804,19 @@ static int vdec_queue_setup(struct vb2_queue *q,
 		return 0;
 	}
 
-	ret = vdec_session_init(inst);
+	ret = vdec_pm_get(inst);
 	if (ret)
 		return ret;
 
+	ret = vdec_session_init(inst);
+	if (ret)
+		goto put_power;
+
 	ret = vdec_num_buffers(inst, &in_num, &out_num);
+	if (ret)
+		goto put_power;
+
+	ret = vdec_pm_put(inst, false);
 	if (ret)
 		return ret;
 
@@ -786,6 +852,10 @@ static int vdec_queue_setup(struct vb2_queue *q,
 	}
 
 	return ret;
+
+put_power:
+	vdec_pm_put(inst, false);
+	return ret;
 }
 
 static int vdec_verify_conf(struct venus_inst *inst)
@@ -947,14 +1017,23 @@ static int vdec_start_streaming(struct vb2_queue *q, unsigned int count)
 
 	mutex_lock(&inst->lock);
 
-	ret = venus_pm_acquire_core(inst);
-	if (ret)
-		goto error;
-
-	if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+	if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
 		ret = vdec_start_capture(inst);
-	else
+	} else {
+		ret = vdec_pm_get(inst);
+		if (ret)
+			goto error;
+
+		ret = venus_pm_acquire_core(inst);
+		if (ret)
+			goto put_power;
+
+		ret = vdec_pm_put(inst, true);
+		if (ret)
+			goto error;
+
 		ret = vdec_start_output(inst);
+	}
 
 	if (ret)
 		goto error;
@@ -962,6 +1041,8 @@ static int vdec_start_streaming(struct vb2_queue *q, unsigned int count)
 	mutex_unlock(&inst->lock);
 	return 0;
 
+put_power:
+	vdec_pm_put(inst, false);
 error:
 	venus_helper_buffers_done(inst, VB2_BUF_STATE_QUEUED);
 	mutex_unlock(&inst->lock);
@@ -1055,8 +1136,9 @@ static void vdec_session_release(struct venus_inst *inst)
 	struct venus_core *core = inst->core;
 	int ret, abort = 0;
 
-	mutex_lock(&inst->lock);
+	vdec_pm_get(inst);
 
+	mutex_lock(&inst->lock);
 	inst->codec_state = VENUS_DEC_STATE_DEINIT;
 
 	ret = hfi_session_stop(inst);
@@ -1078,10 +1160,11 @@ static void vdec_session_release(struct venus_inst *inst)
 
 	venus_helper_free_dpb_bufs(inst);
 	venus_pm_load_scale(inst);
-	venus_pm_release_core(inst);
 	INIT_LIST_HEAD(&inst->registeredbufs);
-
 	mutex_unlock(&inst->lock);
+
+	venus_pm_release_core(inst);
+	vdec_pm_put(inst, false);
 }
 
 static int vdec_buf_init(struct vb2_buffer *vb)
@@ -1102,6 +1185,15 @@ static void vdec_buf_cleanup(struct vb2_buffer *vb)
 		vdec_session_release(inst);
 }
 
+static void vdec_vb2_buf_queue(struct vb2_buffer *vb)
+{
+	struct venus_inst *inst = vb2_get_drv_priv(vb->vb2_queue);
+
+	vdec_pm_get_put(inst);
+
+	venus_helper_vb2_buf_queue(vb);
+}
+
 static const struct vb2_ops vdec_vb2_ops = {
 	.queue_setup = vdec_queue_setup,
 	.buf_init = vdec_buf_init,
@@ -1109,7 +1201,7 @@ static const struct vb2_ops vdec_vb2_ops = {
 	.buf_prepare = venus_helper_vb2_buf_prepare,
 	.start_streaming = vdec_start_streaming,
 	.stop_streaming = vdec_stop_streaming,
-	.buf_queue = venus_helper_vb2_buf_queue,
+	.buf_queue = vdec_vb2_buf_queue,
 };
 
 static void vdec_buf_done(struct venus_inst *inst, unsigned int buf_type,
@@ -1121,6 +1213,8 @@ static void vdec_buf_done(struct venus_inst *inst, unsigned int buf_type,
 	struct vb2_buffer *vb;
 	unsigned int type;
 
+	vdec_pm_touch(inst);
+
 	if (buf_type == HFI_BUFFER_INPUT)
 		type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
 	else
@@ -1227,6 +1321,8 @@ static void vdec_event_notify(struct venus_inst *inst, u32 event,
 	struct venus_core *core = inst->core;
 	struct device *dev = core->dev_dec;
 
+	vdec_pm_touch(inst);
+
 	switch (event) {
 	case EVT_SESSION_ERROR:
 		inst->session_error = true;
@@ -1347,13 +1443,9 @@ static int vdec_open(struct file *file)
 	init_waitqueue_head(&inst->reconf_wait);
 	venus_helper_init_instance(inst);
 
-	ret = pm_runtime_get_sync(core->dev_dec);
-	if (ret < 0)
-		goto err_free_inst;
-
 	ret = vdec_ctrl_init(inst);
 	if (ret)
-		goto err_put_sync;
+		goto err_free;
 
 	ret = hfi_session_create(inst, &vdec_hfi_ops);
 	if (ret)
@@ -1392,9 +1484,7 @@ static int vdec_open(struct file *file)
 	hfi_session_destroy(inst);
 err_ctrl_deinit:
 	vdec_ctrl_deinit(inst);
-err_put_sync:
-	pm_runtime_put_sync(core->dev_dec);
-err_free_inst:
+err_free:
 	kfree(inst);
 	return ret;
 }
@@ -1403,6 +1493,8 @@ static int vdec_close(struct file *file)
 {
 	struct venus_inst *inst = to_inst(file);
 
+	vdec_pm_get(inst);
+
 	v4l2_m2m_ctx_release(inst->m2m_ctx);
 	v4l2_m2m_release(inst->m2m_dev);
 	vdec_ctrl_deinit(inst);
@@ -1411,7 +1503,7 @@ static int vdec_close(struct file *file)
 	v4l2_fh_del(&inst->fh);
 	v4l2_fh_exit(&inst->fh);
 
-	pm_runtime_put_sync(inst->core->dev_dec);
+	vdec_pm_put(inst, false);
 
 	kfree(inst);
 	return 0;
@@ -1468,6 +1560,8 @@ static int vdec_probe(struct platform_device *pdev)
 	core->dev_dec = dev;
 
 	video_set_drvdata(vdev, core);
+	pm_runtime_set_autosuspend_delay(dev, 2000);
+	pm_runtime_use_autosuspend(dev);
 	pm_runtime_enable(dev);
 
 	return 0;
diff --git a/drivers/media/platform/rcar-fcp.c b/drivers/media/platform/rcar-fcp.c
index 43c78620c9d8..5c6b00737fe7 100644
--- a/drivers/media/platform/rcar-fcp.c
+++ b/drivers/media/platform/rcar-fcp.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
@@ -21,6 +22,7 @@
 struct rcar_fcp_device {
 	struct list_head list;
 	struct device *dev;
+	struct device_dma_parameters dma_parms;
 };
 
 static LIST_HEAD(fcp_devices);
@@ -136,6 +138,9 @@ static int rcar_fcp_probe(struct platform_device *pdev)
 
 	fcp->dev = &pdev->dev;
 
+	fcp->dev->dma_parms = &fcp->dma_parms;
+	dma_set_max_seg_size(fcp->dev, DMA_BIT_MASK(32));
+
 	pm_runtime_enable(&pdev->dev);
 
 	mutex_lock(&fcp_lock);
diff --git a/drivers/media/platform/rcar-vin/Kconfig b/drivers/media/platform/rcar-vin/Kconfig
index 240ac3f3c941..ca0d906dce2f 100644
--- a/drivers/media/platform/rcar-vin/Kconfig
+++ b/drivers/media/platform/rcar-vin/Kconfig
@@ -1,8 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 config VIDEO_RCAR_CSI2
 	tristate "R-Car MIPI CSI-2 Receiver"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF
+	depends on VIDEO_V4L2 && OF
 	depends on ARCH_RENESAS || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select RESET_CONTROLLER
 	select V4L2_FWNODE
 	help
@@ -14,8 +16,10 @@ config VIDEO_RCAR_CSI2
 
 config VIDEO_RCAR_VIN
 	tristate "R-Car Video Input (VIN) Driver"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && MEDIA_CONTROLLER
+	depends on VIDEO_V4L2 && OF
 	depends on ARCH_RENESAS || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_FWNODE
 	help
diff --git a/drivers/media/platform/s5p-cec/Makefile b/drivers/media/platform/s5p-cec/Makefile
deleted file mode 100644
index bd0103b91bee..000000000000
--- a/drivers/media/platform/s5p-cec/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC)	+= s5p-cec.o
-s5p-cec-y += s5p_cec.o exynos_hdmi_cecctrl.o
diff --git a/drivers/media/platform/s5p-cec/exynos_hdmi_cec.h b/drivers/media/platform/s5p-cec/exynos_hdmi_cec.h
deleted file mode 100644
index 325db8c432bd..000000000000
--- a/drivers/media/platform/s5p-cec/exynos_hdmi_cec.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* drivers/media/platform/s5p-cec/exynos_hdmi_cec.h
- *
- * Copyright (c) 2010, 2014 Samsung Electronics
- *		http://www.samsung.com/
- *
- * Header file for interface of Samsung Exynos hdmi cec hardware
- */
-
-#ifndef _EXYNOS_HDMI_CEC_H_
-#define _EXYNOS_HDMI_CEC_H_ __FILE__
-
-#include <linux/regmap.h>
-#include "s5p_cec.h"
-
-void s5p_cec_set_divider(struct s5p_cec_dev *cec);
-void s5p_cec_enable_rx(struct s5p_cec_dev *cec);
-void s5p_cec_mask_rx_interrupts(struct s5p_cec_dev *cec);
-void s5p_cec_unmask_rx_interrupts(struct s5p_cec_dev *cec);
-void s5p_cec_mask_tx_interrupts(struct s5p_cec_dev *cec);
-void s5p_cec_unmask_tx_interrupts(struct s5p_cec_dev *cec);
-void s5p_cec_reset(struct s5p_cec_dev *cec);
-void s5p_cec_tx_reset(struct s5p_cec_dev *cec);
-void s5p_cec_rx_reset(struct s5p_cec_dev *cec);
-void s5p_cec_threshold(struct s5p_cec_dev *cec);
-void s5p_cec_copy_packet(struct s5p_cec_dev *cec, char *data,
-			 size_t count, u8 retries);
-void s5p_cec_set_addr(struct s5p_cec_dev *cec, u32 addr);
-u32 s5p_cec_get_status(struct s5p_cec_dev *cec);
-void s5p_clr_pending_tx(struct s5p_cec_dev *cec);
-void s5p_clr_pending_rx(struct s5p_cec_dev *cec);
-void s5p_cec_get_rx_buf(struct s5p_cec_dev *cec, u32 size, u8 *buffer);
-
-#endif /* _EXYNOS_HDMI_CEC_H_ */
diff --git a/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c b/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c
deleted file mode 100644
index eb981ebce362..000000000000
--- a/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c
- *
- * Copyright (c) 2009, 2014 Samsung Electronics
- *		http://www.samsung.com/
- *
- * cec ftn file for Samsung TVOUT driver
- */
-
-#include <linux/io.h>
-#include <linux/device.h>
-
-#include "exynos_hdmi_cec.h"
-#include "regs-cec.h"
-
-#define S5P_HDMI_FIN			24000000
-#define CEC_DIV_RATIO			320000
-
-#define CEC_MESSAGE_BROADCAST_MASK	0x0F
-#define CEC_MESSAGE_BROADCAST		0x0F
-#define CEC_FILTER_THRESHOLD		0x15
-
-void s5p_cec_set_divider(struct s5p_cec_dev *cec)
-{
-	u32 div_ratio, div_val;
-	unsigned int reg;
-
-	div_ratio  = S5P_HDMI_FIN / CEC_DIV_RATIO - 1;
-
-	if (regmap_read(cec->pmu, EXYNOS_HDMI_PHY_CONTROL, &reg)) {
-		dev_err(cec->dev, "failed to read phy control\n");
-		return;
-	}
-
-	reg = (reg & ~(0x3FF << 16)) | (div_ratio << 16);
-
-	if (regmap_write(cec->pmu, EXYNOS_HDMI_PHY_CONTROL, reg)) {
-		dev_err(cec->dev, "failed to write phy control\n");
-		return;
-	}
-
-	div_val = CEC_DIV_RATIO * 0.00005 - 1;
-
-	writeb(0x0, cec->reg + S5P_CEC_DIVISOR_3);
-	writeb(0x0, cec->reg + S5P_CEC_DIVISOR_2);
-	writeb(0x0, cec->reg + S5P_CEC_DIVISOR_1);
-	writeb(div_val, cec->reg + S5P_CEC_DIVISOR_0);
-}
-
-void s5p_cec_enable_rx(struct s5p_cec_dev *cec)
-{
-	u8 reg;
-
-	reg = readb(cec->reg + S5P_CEC_RX_CTRL);
-	reg |= S5P_CEC_RX_CTRL_ENABLE;
-	writeb(reg, cec->reg + S5P_CEC_RX_CTRL);
-}
-
-void s5p_cec_mask_rx_interrupts(struct s5p_cec_dev *cec)
-{
-	u8 reg;
-
-	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
-	reg |= S5P_CEC_IRQ_RX_DONE;
-	reg |= S5P_CEC_IRQ_RX_ERROR;
-	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
-}
-
-void s5p_cec_unmask_rx_interrupts(struct s5p_cec_dev *cec)
-{
-	u8 reg;
-
-	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
-	reg &= ~S5P_CEC_IRQ_RX_DONE;
-	reg &= ~S5P_CEC_IRQ_RX_ERROR;
-	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
-}
-
-void s5p_cec_mask_tx_interrupts(struct s5p_cec_dev *cec)
-{
-	u8 reg;
-
-	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
-	reg |= S5P_CEC_IRQ_TX_DONE;
-	reg |= S5P_CEC_IRQ_TX_ERROR;
-	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
-}
-
-void s5p_cec_unmask_tx_interrupts(struct s5p_cec_dev *cec)
-{
-	u8 reg;
-
-	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
-	reg &= ~S5P_CEC_IRQ_TX_DONE;
-	reg &= ~S5P_CEC_IRQ_TX_ERROR;
-	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
-}
-
-void s5p_cec_reset(struct s5p_cec_dev *cec)
-{
-	u8 reg;
-
-	writeb(S5P_CEC_RX_CTRL_RESET, cec->reg + S5P_CEC_RX_CTRL);
-	writeb(S5P_CEC_TX_CTRL_RESET, cec->reg + S5P_CEC_TX_CTRL);
-
-	reg = readb(cec->reg + 0xc4);
-	reg &= ~0x1;
-	writeb(reg, cec->reg + 0xc4);
-}
-
-void s5p_cec_tx_reset(struct s5p_cec_dev *cec)
-{
-	writeb(S5P_CEC_TX_CTRL_RESET, cec->reg + S5P_CEC_TX_CTRL);
-}
-
-void s5p_cec_rx_reset(struct s5p_cec_dev *cec)
-{
-	u8 reg;
-
-	writeb(S5P_CEC_RX_CTRL_RESET, cec->reg + S5P_CEC_RX_CTRL);
-
-	reg = readb(cec->reg + 0xc4);
-	reg &= ~0x1;
-	writeb(reg, cec->reg + 0xc4);
-}
-
-void s5p_cec_threshold(struct s5p_cec_dev *cec)
-{
-	writeb(CEC_FILTER_THRESHOLD, cec->reg + S5P_CEC_RX_FILTER_TH);
-	writeb(0, cec->reg + S5P_CEC_RX_FILTER_CTRL);
-}
-
-void s5p_cec_copy_packet(struct s5p_cec_dev *cec, char *data,
-			 size_t count, u8 retries)
-{
-	int i = 0;
-	u8 reg;
-
-	while (i < count) {
-		writeb(data[i], cec->reg + (S5P_CEC_TX_BUFF0 + (i * 4)));
-		i++;
-	}
-
-	writeb(count, cec->reg + S5P_CEC_TX_BYTES);
-	reg = readb(cec->reg + S5P_CEC_TX_CTRL);
-	reg |= S5P_CEC_TX_CTRL_START;
-	reg &= ~0x70;
-	reg |= retries << 4;
-
-	if ((data[0] & CEC_MESSAGE_BROADCAST_MASK) == CEC_MESSAGE_BROADCAST) {
-		dev_dbg(cec->dev, "Broadcast");
-		reg |= S5P_CEC_TX_CTRL_BCAST;
-	} else {
-		dev_dbg(cec->dev, "No Broadcast");
-		reg &= ~S5P_CEC_TX_CTRL_BCAST;
-	}
-
-	writeb(reg, cec->reg + S5P_CEC_TX_CTRL);
-	dev_dbg(cec->dev, "cec-tx: cec count (%zu): %*ph", count,
-		(int)count, data);
-}
-
-void s5p_cec_set_addr(struct s5p_cec_dev *cec, u32 addr)
-{
-	writeb(addr & 0x0F, cec->reg + S5P_CEC_LOGIC_ADDR);
-}
-
-u32 s5p_cec_get_status(struct s5p_cec_dev *cec)
-{
-	u32 status = 0;
-
-	status = readb(cec->reg + S5P_CEC_STATUS_0) & 0xf;
-	status |= (readb(cec->reg + S5P_CEC_TX_STAT1) & 0xf) << 4;
-	status |= readb(cec->reg + S5P_CEC_STATUS_1) << 8;
-	status |= readb(cec->reg + S5P_CEC_STATUS_2) << 16;
-	status |= readb(cec->reg + S5P_CEC_STATUS_3) << 24;
-
-	dev_dbg(cec->dev, "status = 0x%x!\n", status);
-
-	return status;
-}
-
-void s5p_clr_pending_tx(struct s5p_cec_dev *cec)
-{
-	writeb(S5P_CEC_IRQ_TX_DONE | S5P_CEC_IRQ_TX_ERROR,
-	       cec->reg + S5P_CEC_IRQ_CLEAR);
-}
-
-void s5p_clr_pending_rx(struct s5p_cec_dev *cec)
-{
-	writeb(S5P_CEC_IRQ_RX_DONE | S5P_CEC_IRQ_RX_ERROR,
-	       cec->reg + S5P_CEC_IRQ_CLEAR);
-}
-
-void s5p_cec_get_rx_buf(struct s5p_cec_dev *cec, u32 size, u8 *buffer)
-{
-	u32 i = 0;
-	char debug[40];
-
-	while (i < size) {
-		buffer[i] = readb(cec->reg + S5P_CEC_RX_BUFF0 + (i * 4));
-		sprintf(debug + i * 2, "%02x ", buffer[i]);
-		i++;
-	}
-	dev_dbg(cec->dev, "cec-rx: cec size(%d): %s", size, debug);
-}
diff --git a/drivers/media/platform/s5p-cec/regs-cec.h b/drivers/media/platform/s5p-cec/regs-cec.h
deleted file mode 100644
index 447f717028a2..000000000000
--- a/drivers/media/platform/s5p-cec/regs-cec.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* drivers/media/platform/s5p-cec/regs-cec.h
- *
- * Copyright (c) 2010 Samsung Electronics
- *		http://www.samsung.com/
- *
- *  register header file for Samsung TVOUT driver
- */
-
-#ifndef __EXYNOS_REGS__H
-#define __EXYNOS_REGS__H
-
-/*
- * Register part
- */
-#define S5P_CEC_STATUS_0			(0x0000)
-#define S5P_CEC_STATUS_1			(0x0004)
-#define S5P_CEC_STATUS_2			(0x0008)
-#define S5P_CEC_STATUS_3			(0x000C)
-#define S5P_CEC_IRQ_MASK			(0x0010)
-#define S5P_CEC_IRQ_CLEAR			(0x0014)
-#define S5P_CEC_LOGIC_ADDR			(0x0020)
-#define S5P_CEC_DIVISOR_0			(0x0030)
-#define S5P_CEC_DIVISOR_1			(0x0034)
-#define S5P_CEC_DIVISOR_2			(0x0038)
-#define S5P_CEC_DIVISOR_3			(0x003C)
-
-#define S5P_CEC_TX_CTRL				(0x0040)
-#define S5P_CEC_TX_BYTES			(0x0044)
-#define S5P_CEC_TX_STAT0			(0x0060)
-#define S5P_CEC_TX_STAT1			(0x0064)
-#define S5P_CEC_TX_BUFF0			(0x0080)
-#define S5P_CEC_TX_BUFF1			(0x0084)
-#define S5P_CEC_TX_BUFF2			(0x0088)
-#define S5P_CEC_TX_BUFF3			(0x008C)
-#define S5P_CEC_TX_BUFF4			(0x0090)
-#define S5P_CEC_TX_BUFF5			(0x0094)
-#define S5P_CEC_TX_BUFF6			(0x0098)
-#define S5P_CEC_TX_BUFF7			(0x009C)
-#define S5P_CEC_TX_BUFF8			(0x00A0)
-#define S5P_CEC_TX_BUFF9			(0x00A4)
-#define S5P_CEC_TX_BUFF10			(0x00A8)
-#define S5P_CEC_TX_BUFF11			(0x00AC)
-#define S5P_CEC_TX_BUFF12			(0x00B0)
-#define S5P_CEC_TX_BUFF13			(0x00B4)
-#define S5P_CEC_TX_BUFF14			(0x00B8)
-#define S5P_CEC_TX_BUFF15			(0x00BC)
-
-#define S5P_CEC_RX_CTRL				(0x00C0)
-#define S5P_CEC_RX_STAT0			(0x00E0)
-#define S5P_CEC_RX_STAT1			(0x00E4)
-#define S5P_CEC_RX_BUFF0			(0x0100)
-#define S5P_CEC_RX_BUFF1			(0x0104)
-#define S5P_CEC_RX_BUFF2			(0x0108)
-#define S5P_CEC_RX_BUFF3			(0x010C)
-#define S5P_CEC_RX_BUFF4			(0x0110)
-#define S5P_CEC_RX_BUFF5			(0x0114)
-#define S5P_CEC_RX_BUFF6			(0x0118)
-#define S5P_CEC_RX_BUFF7			(0x011C)
-#define S5P_CEC_RX_BUFF8			(0x0120)
-#define S5P_CEC_RX_BUFF9			(0x0124)
-#define S5P_CEC_RX_BUFF10			(0x0128)
-#define S5P_CEC_RX_BUFF11			(0x012C)
-#define S5P_CEC_RX_BUFF12			(0x0130)
-#define S5P_CEC_RX_BUFF13			(0x0134)
-#define S5P_CEC_RX_BUFF14			(0x0138)
-#define S5P_CEC_RX_BUFF15			(0x013C)
-
-#define S5P_CEC_RX_FILTER_CTRL			(0x0180)
-#define S5P_CEC_RX_FILTER_TH			(0x0184)
-
-/*
- * Bit definition part
- */
-#define S5P_CEC_IRQ_TX_DONE			(1<<0)
-#define S5P_CEC_IRQ_TX_ERROR			(1<<1)
-#define S5P_CEC_IRQ_RX_DONE			(1<<4)
-#define S5P_CEC_IRQ_RX_ERROR			(1<<5)
-
-#define S5P_CEC_TX_CTRL_START			(1<<0)
-#define S5P_CEC_TX_CTRL_BCAST			(1<<1)
-#define S5P_CEC_TX_CTRL_RETRY			(0x04<<4)
-#define S5P_CEC_TX_CTRL_RESET			(1<<7)
-
-#define S5P_CEC_RX_CTRL_ENABLE			(1<<0)
-#define S5P_CEC_RX_CTRL_RESET			(1<<7)
-
-#define S5P_CEC_LOGIC_ADDR_MASK			(0xF)
-
-/* PMU Registers for PHY */
-#define EXYNOS_HDMI_PHY_CONTROL			0x700
-
-#endif	/* __EXYNOS_REGS__H	*/
diff --git a/drivers/media/platform/s5p-cec/s5p_cec.c b/drivers/media/platform/s5p-cec/s5p_cec.c
deleted file mode 100644
index 2a3e7ffefe0a..000000000000
--- a/drivers/media/platform/s5p-cec/s5p_cec.c
+++ /dev/null
@@ -1,307 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* drivers/media/platform/s5p-cec/s5p_cec.c
- *
- * Samsung S5P CEC driver
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *
- * This driver is based on the "cec interface driver for exynos soc" by
- * SangPil Moon.
- */
-
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <media/cec.h>
-#include <media/cec-notifier.h>
-
-#include "exynos_hdmi_cec.h"
-#include "regs-cec.h"
-#include "s5p_cec.h"
-
-#define CEC_NAME	"s5p-cec"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "debug level (0-2)");
-
-static int s5p_cec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct s5p_cec_dev *cec = cec_get_drvdata(adap);
-
-	if (enable) {
-		pm_runtime_get_sync(cec->dev);
-
-		s5p_cec_reset(cec);
-
-		s5p_cec_set_divider(cec);
-		s5p_cec_threshold(cec);
-
-		s5p_cec_unmask_tx_interrupts(cec);
-		s5p_cec_unmask_rx_interrupts(cec);
-		s5p_cec_enable_rx(cec);
-	} else {
-		s5p_cec_mask_tx_interrupts(cec);
-		s5p_cec_mask_rx_interrupts(cec);
-		pm_runtime_disable(cec->dev);
-	}
-
-	return 0;
-}
-
-static int s5p_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
-{
-	struct s5p_cec_dev *cec = cec_get_drvdata(adap);
-
-	s5p_cec_set_addr(cec, addr);
-	return 0;
-}
-
-static int s5p_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
-				 u32 signal_free_time, struct cec_msg *msg)
-{
-	struct s5p_cec_dev *cec = cec_get_drvdata(adap);
-
-	/*
-	 * Unclear if 0 retries are allowed by the hardware, so have 1 as
-	 * the minimum.
-	 */
-	s5p_cec_copy_packet(cec, msg->msg, msg->len, max(1, attempts - 1));
-	return 0;
-}
-
-static irqreturn_t s5p_cec_irq_handler(int irq, void *priv)
-{
-	struct s5p_cec_dev *cec = priv;
-	u32 status = 0;
-
-	status = s5p_cec_get_status(cec);
-
-	dev_dbg(cec->dev, "irq received\n");
-
-	if (status & CEC_STATUS_TX_DONE) {
-		if (status & CEC_STATUS_TX_NACK) {
-			dev_dbg(cec->dev, "CEC_STATUS_TX_NACK set\n");
-			cec->tx = STATE_NACK;
-		} else if (status & CEC_STATUS_TX_ERROR) {
-			dev_dbg(cec->dev, "CEC_STATUS_TX_ERROR set\n");
-			cec->tx = STATE_ERROR;
-		} else {
-			dev_dbg(cec->dev, "CEC_STATUS_TX_DONE\n");
-			cec->tx = STATE_DONE;
-		}
-		s5p_clr_pending_tx(cec);
-	}
-
-	if (status & CEC_STATUS_RX_DONE) {
-		if (status & CEC_STATUS_RX_ERROR) {
-			dev_dbg(cec->dev, "CEC_STATUS_RX_ERROR set\n");
-			s5p_cec_rx_reset(cec);
-			s5p_cec_enable_rx(cec);
-		} else {
-			dev_dbg(cec->dev, "CEC_STATUS_RX_DONE set\n");
-			if (cec->rx != STATE_IDLE)
-				dev_dbg(cec->dev, "Buffer overrun (worker did not process previous message)\n");
-			cec->rx = STATE_BUSY;
-			cec->msg.len = status >> 24;
-			cec->msg.rx_status = CEC_RX_STATUS_OK;
-			s5p_cec_get_rx_buf(cec, cec->msg.len,
-					cec->msg.msg);
-			cec->rx = STATE_DONE;
-			s5p_cec_enable_rx(cec);
-		}
-		/* Clear interrupt pending bit */
-		s5p_clr_pending_rx(cec);
-	}
-	return IRQ_WAKE_THREAD;
-}
-
-static irqreturn_t s5p_cec_irq_handler_thread(int irq, void *priv)
-{
-	struct s5p_cec_dev *cec = priv;
-
-	dev_dbg(cec->dev, "irq processing thread\n");
-	switch (cec->tx) {
-	case STATE_DONE:
-		cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
-		cec->tx = STATE_IDLE;
-		break;
-	case STATE_NACK:
-		cec_transmit_done(cec->adap,
-			CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_NACK,
-			0, 1, 0, 0);
-		cec->tx = STATE_IDLE;
-		break;
-	case STATE_ERROR:
-		cec_transmit_done(cec->adap,
-			CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_ERROR,
-			0, 0, 0, 1);
-		cec->tx = STATE_IDLE;
-		break;
-	case STATE_BUSY:
-		dev_err(cec->dev, "state set to busy, this should not occur here\n");
-		break;
-	default:
-		break;
-	}
-
-	switch (cec->rx) {
-	case STATE_DONE:
-		cec_received_msg(cec->adap, &cec->msg);
-		cec->rx = STATE_IDLE;
-		break;
-	default:
-		break;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static const struct cec_adap_ops s5p_cec_adap_ops = {
-	.adap_enable = s5p_cec_adap_enable,
-	.adap_log_addr = s5p_cec_adap_log_addr,
-	.adap_transmit = s5p_cec_adap_transmit,
-};
-
-static int s5p_cec_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device *hdmi_dev;
-	struct resource *res;
-	struct s5p_cec_dev *cec;
-	bool needs_hpd = of_property_read_bool(pdev->dev.of_node, "needs-hpd");
-	int ret;
-
-	hdmi_dev = cec_notifier_parse_hdmi_phandle(dev);
-
-	if (IS_ERR(hdmi_dev))
-		return PTR_ERR(hdmi_dev);
-
-	cec = devm_kzalloc(&pdev->dev, sizeof(*cec), GFP_KERNEL);
-	if (!cec)
-		return -ENOMEM;
-
-	cec->dev = dev;
-
-	cec->irq = platform_get_irq(pdev, 0);
-	if (cec->irq < 0)
-		return cec->irq;
-
-	ret = devm_request_threaded_irq(dev, cec->irq, s5p_cec_irq_handler,
-		s5p_cec_irq_handler_thread, 0, pdev->name, cec);
-	if (ret)
-		return ret;
-
-	cec->clk = devm_clk_get(dev, "hdmicec");
-	if (IS_ERR(cec->clk))
-		return PTR_ERR(cec->clk);
-
-	cec->pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
-						 "samsung,syscon-phandle");
-	if (IS_ERR(cec->pmu))
-		return -EPROBE_DEFER;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	cec->reg = devm_ioremap_resource(dev, res);
-	if (IS_ERR(cec->reg))
-		return PTR_ERR(cec->reg);
-
-	cec->adap = cec_allocate_adapter(&s5p_cec_adap_ops, cec, CEC_NAME,
-		CEC_CAP_DEFAULTS | (needs_hpd ? CEC_CAP_NEEDS_HPD : 0) |
-		CEC_CAP_CONNECTOR_INFO, 1);
-	ret = PTR_ERR_OR_ZERO(cec->adap);
-	if (ret)
-		return ret;
-
-	cec->notifier = cec_notifier_cec_adap_register(hdmi_dev, NULL,
-						       cec->adap);
-	if (!cec->notifier) {
-		ret = -ENOMEM;
-		goto err_delete_adapter;
-	}
-
-	ret = cec_register_adapter(cec->adap, &pdev->dev);
-	if (ret)
-		goto err_notifier;
-
-	platform_set_drvdata(pdev, cec);
-	pm_runtime_enable(dev);
-
-	dev_dbg(dev, "successfully probed\n");
-	return 0;
-
-err_notifier:
-	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
-
-err_delete_adapter:
-	cec_delete_adapter(cec->adap);
-	return ret;
-}
-
-static int s5p_cec_remove(struct platform_device *pdev)
-{
-	struct s5p_cec_dev *cec = platform_get_drvdata(pdev);
-
-	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
-	cec_unregister_adapter(cec->adap);
-	pm_runtime_disable(&pdev->dev);
-	return 0;
-}
-
-static int __maybe_unused s5p_cec_runtime_suspend(struct device *dev)
-{
-	struct s5p_cec_dev *cec = dev_get_drvdata(dev);
-
-	clk_disable_unprepare(cec->clk);
-	return 0;
-}
-
-static int __maybe_unused s5p_cec_runtime_resume(struct device *dev)
-{
-	struct s5p_cec_dev *cec = dev_get_drvdata(dev);
-	int ret;
-
-	ret = clk_prepare_enable(cec->clk);
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-static const struct dev_pm_ops s5p_cec_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				pm_runtime_force_resume)
-	SET_RUNTIME_PM_OPS(s5p_cec_runtime_suspend, s5p_cec_runtime_resume,
-			   NULL)
-};
-
-static const struct of_device_id s5p_cec_match[] = {
-	{
-		.compatible	= "samsung,s5p-cec",
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, s5p_cec_match);
-
-static struct platform_driver s5p_cec_pdrv = {
-	.probe	= s5p_cec_probe,
-	.remove	= s5p_cec_remove,
-	.driver	= {
-		.name		= CEC_NAME,
-		.of_match_table	= s5p_cec_match,
-		.pm		= &s5p_cec_pm_ops,
-	},
-};
-
-module_platform_driver(s5p_cec_pdrv);
-
-MODULE_AUTHOR("Kamil Debski <kamil@wypas.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Samsung S5P CEC driver");
diff --git a/drivers/media/platform/s5p-cec/s5p_cec.h b/drivers/media/platform/s5p-cec/s5p_cec.h
deleted file mode 100644
index 34d033b20f96..000000000000
--- a/drivers/media/platform/s5p-cec/s5p_cec.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* drivers/media/platform/s5p-cec/s5p_cec.h
- *
- * Samsung S5P HDMI CEC driver
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- */
-
-#ifndef _S5P_CEC_H_
-#define _S5P_CEC_H_ __FILE__
-
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <media/cec.h>
-
-#include "exynos_hdmi_cec.h"
-#include "regs-cec.h"
-#include "s5p_cec.h"
-
-#define CEC_NAME	"s5p-cec"
-
-#define CEC_STATUS_TX_RUNNING		(1 << 0)
-#define CEC_STATUS_TX_TRANSFERRING	(1 << 1)
-#define CEC_STATUS_TX_DONE		(1 << 2)
-#define CEC_STATUS_TX_ERROR		(1 << 3)
-#define CEC_STATUS_TX_NACK		(1 << 4)
-#define CEC_STATUS_TX_BYTES		(0xFF << 8)
-#define CEC_STATUS_RX_RUNNING		(1 << 16)
-#define CEC_STATUS_RX_RECEIVING		(1 << 17)
-#define CEC_STATUS_RX_DONE		(1 << 18)
-#define CEC_STATUS_RX_ERROR		(1 << 19)
-#define CEC_STATUS_RX_BCAST		(1 << 20)
-#define CEC_STATUS_RX_BYTES		(0xFF << 24)
-
-#define CEC_WORKER_TX_DONE		(1 << 0)
-#define CEC_WORKER_RX_MSG		(1 << 1)
-
-/* CEC Rx buffer size */
-#define CEC_RX_BUFF_SIZE		16
-/* CEC Tx buffer size */
-#define CEC_TX_BUFF_SIZE		16
-
-enum cec_state {
-	STATE_IDLE,
-	STATE_BUSY,
-	STATE_DONE,
-	STATE_NACK,
-	STATE_ERROR
-};
-
-struct cec_notifier;
-
-struct s5p_cec_dev {
-	struct cec_adapter	*adap;
-	struct clk		*clk;
-	struct device		*dev;
-	struct mutex		lock;
-	struct regmap           *pmu;
-	struct cec_notifier	*notifier;
-	int			irq;
-	void __iomem		*reg;
-
-	enum cec_state		rx;
-	enum cec_state		tx;
-	struct cec_msg		msg;
-};
-
-#endif /* _S5P_CEC_H_ */
diff --git a/drivers/media/platform/seco-cec/Makefile b/drivers/media/platform/seco-cec/Makefile
deleted file mode 100644
index 79fde6947ff2..000000000000
--- a/drivers/media/platform/seco-cec/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_SECO_CEC) += seco-cec.o
diff --git a/drivers/media/platform/seco-cec/seco-cec.c b/drivers/media/platform/seco-cec/seco-cec.c
deleted file mode 100644
index 2ff62a488b27..000000000000
--- a/drivers/media/platform/seco-cec/seco-cec.c
+++ /dev/null
@@ -1,803 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
-/*
- * CEC driver for SECO X86 Boards
- *
- * Author:  Ettore Chimenti <ek5.chimenti@gmail.com>
- * Copyright (C) 2018, SECO SpA.
- * Copyright (C) 2018, Aidilab Srl.
- */
-
-#include <linux/module.h>
-#include <linux/acpi.h>
-#include <linux/delay.h>
-#include <linux/dmi.h>
-#include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-
-/* CEC Framework */
-#include <media/cec-notifier.h>
-
-#include "seco-cec.h"
-
-struct secocec_data {
-	struct device *dev;
-	struct platform_device *pdev;
-	struct cec_adapter *cec_adap;
-	struct cec_notifier *notifier;
-	struct rc_dev *ir;
-	char ir_input_phys[32];
-	int irq;
-};
-
-#define smb_wr16(cmd, data) smb_word_op(CMD_WORD_DATA, SECOCEC_MICRO_ADDRESS, \
-					     cmd, data, SMBUS_WRITE, NULL)
-#define smb_rd16(cmd, res) smb_word_op(CMD_WORD_DATA, SECOCEC_MICRO_ADDRESS, \
-				       cmd, 0, SMBUS_READ, res)
-
-static int smb_word_op(short data_format, u16 slave_addr, u8 cmd, u16 data,
-		       u8 operation, u16 *result)
-{
-	unsigned int count;
-	short _data_format;
-	int status = 0;
-
-	switch (data_format) {
-	case CMD_BYTE_DATA:
-		_data_format = BRA_SMB_CMD_BYTE_DATA;
-		break;
-	case CMD_WORD_DATA:
-		_data_format = BRA_SMB_CMD_WORD_DATA;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* Active wait until ready */
-	for (count = 0; count <= SMBTIMEOUT; ++count) {
-		if (!(inb(HSTS) & BRA_INUSE_STS))
-			break;
-		udelay(SMB_POLL_UDELAY);
-	}
-
-	if (count > SMBTIMEOUT)
-		/* Reset the lock instead of failing */
-		outb(0xff, HSTS);
-
-	outb(0x00, HCNT);
-	outb((u8)(slave_addr & 0xfe) | operation, XMIT_SLVA);
-	outb(cmd, HCMD);
-	inb(HCNT);
-
-	if (operation == SMBUS_WRITE) {
-		outb((u8)data, HDAT0);
-		outb((u8)(data >> 8), HDAT1);
-	}
-
-	outb(BRA_START + _data_format, HCNT);
-
-	for (count = 0; count <= SMBTIMEOUT; count++) {
-		if (!(inb(HSTS) & BRA_HOST_BUSY))
-			break;
-		udelay(SMB_POLL_UDELAY);
-	}
-
-	if (count > SMBTIMEOUT) {
-		status = -EBUSY;
-		goto err;
-	}
-
-	if (inb(HSTS) & BRA_HSTS_ERR_MASK) {
-		status = -EIO;
-		goto err;
-	}
-
-	if (operation == SMBUS_READ)
-		*result = ((inb(HDAT0) & 0xff) + ((inb(HDAT1) & 0xff) << 8));
-
-err:
-	outb(0xff, HSTS);
-	return status;
-}
-
-static int secocec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct secocec_data *cec = cec_get_drvdata(adap);
-	struct device *dev = cec->dev;
-	u16 val = 0;
-	int status;
-
-	if (enable) {
-		/* Clear the status register */
-		status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
-		if (status)
-			goto err;
-
-		status = smb_wr16(SECOCEC_STATUS_REG_1, val);
-		if (status)
-			goto err;
-
-		/* Enable the interrupts */
-		status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
-		if (status)
-			goto err;
-
-		status = smb_wr16(SECOCEC_ENABLE_REG_1,
-				  val | SECOCEC_ENABLE_REG_1_CEC);
-		if (status)
-			goto err;
-
-		dev_dbg(dev, "Device enabled");
-	} else {
-		/* Clear the status register */
-		status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
-		status = smb_wr16(SECOCEC_STATUS_REG_1, val);
-
-		/* Disable the interrupts */
-		status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
-		status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
-				  ~SECOCEC_ENABLE_REG_1_CEC &
-				  ~SECOCEC_ENABLE_REG_1_IR);
-
-		dev_dbg(dev, "Device disabled");
-	}
-
-	return 0;
-err:
-	return status;
-}
-
-static int secocec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
-{
-	u16 enable_val = 0;
-	int status;
-
-	/* Disable device */
-	status = smb_rd16(SECOCEC_ENABLE_REG_1, &enable_val);
-	if (status)
-		return status;
-
-	status = smb_wr16(SECOCEC_ENABLE_REG_1,
-			  enable_val & ~SECOCEC_ENABLE_REG_1_CEC);
-	if (status)
-		return status;
-
-	/* Write logical address
-	 * NOTE: CEC_LOG_ADDR_INVALID is mapped to the 'Unregistered' LA
-	 */
-	status = smb_wr16(SECOCEC_DEVICE_LA, logical_addr & 0xf);
-	if (status)
-		return status;
-
-	/* Re-enable device */
-	status = smb_wr16(SECOCEC_ENABLE_REG_1,
-			  enable_val | SECOCEC_ENABLE_REG_1_CEC);
-	if (status)
-		return status;
-
-	return 0;
-}
-
-static int secocec_adap_transmit(struct cec_adapter *adap, u8 attempts,
-				 u32 signal_free_time, struct cec_msg *msg)
-{
-	u16 payload_len, payload_id_len, destination, val = 0;
-	u8 *payload_msg;
-	int status;
-	u8 i;
-
-	/* Device msg len already accounts for header */
-	payload_id_len = msg->len - 1;
-
-	/* Send data length */
-	status = smb_wr16(SECOCEC_WRITE_DATA_LENGTH, payload_id_len);
-	if (status)
-		goto err;
-
-	/* Send Operation ID if present */
-	if (payload_id_len > 0) {
-		status = smb_wr16(SECOCEC_WRITE_OPERATION_ID, msg->msg[1]);
-		if (status)
-			goto err;
-	}
-	/* Send data if present */
-	if (payload_id_len > 1) {
-		/* Only data; */
-		payload_len = msg->len - 2;
-		payload_msg = &msg->msg[2];
-
-		/* Copy message into registers */
-		for (i = 0; i < payload_len; i += 2) {
-			/* hi byte */
-			val = payload_msg[i + 1] << 8;
-
-			/* lo byte */
-			val |= payload_msg[i];
-
-			status = smb_wr16(SECOCEC_WRITE_DATA_00 + i / 2, val);
-			if (status)
-				goto err;
-		}
-	}
-	/* Send msg source/destination and fire msg */
-	destination = msg->msg[0];
-	status = smb_wr16(SECOCEC_WRITE_BYTE0, destination);
-	if (status)
-		goto err;
-
-	return 0;
-
-err:
-	return status;
-}
-
-static void secocec_tx_done(struct cec_adapter *adap, u16 status_val)
-{
-	if (status_val & SECOCEC_STATUS_TX_ERROR_MASK) {
-		if (status_val & SECOCEC_STATUS_TX_NACK_ERROR)
-			cec_transmit_attempt_done(adap, CEC_TX_STATUS_NACK);
-		else
-			cec_transmit_attempt_done(adap, CEC_TX_STATUS_ERROR);
-	} else {
-		cec_transmit_attempt_done(adap, CEC_TX_STATUS_OK);
-	}
-
-	/* Reset status reg */
-	status_val = SECOCEC_STATUS_TX_ERROR_MASK |
-		SECOCEC_STATUS_MSG_SENT_MASK |
-		SECOCEC_STATUS_TX_NACK_ERROR;
-	smb_wr16(SECOCEC_STATUS, status_val);
-}
-
-static void secocec_rx_done(struct cec_adapter *adap, u16 status_val)
-{
-	struct secocec_data *cec = cec_get_drvdata(adap);
-	struct device *dev = cec->dev;
-	struct cec_msg msg = { };
-	bool flag_overflow = false;
-	u8 payload_len, i = 0;
-	u8 *payload_msg;
-	u16 val = 0;
-	int status;
-
-	if (status_val & SECOCEC_STATUS_RX_OVERFLOW_MASK) {
-		/* NOTE: Untested, it also might not be necessary */
-		dev_warn(dev, "Received more than 16 bytes. Discarding");
-		flag_overflow = true;
-	}
-
-	if (status_val & SECOCEC_STATUS_RX_ERROR_MASK) {
-		dev_warn(dev, "Message received with errors. Discarding");
-		status = -EIO;
-		goto rxerr;
-	}
-
-	/* Read message length */
-	status = smb_rd16(SECOCEC_READ_DATA_LENGTH, &val);
-	if (status)
-		return;
-
-	/* Device msg len already accounts for the header */
-	msg.len = min(val + 1, CEC_MAX_MSG_SIZE);
-
-	/* Read logical address */
-	status = smb_rd16(SECOCEC_READ_BYTE0, &val);
-	if (status)
-		return;
-
-	/* device stores source LA and destination */
-	msg.msg[0] = val;
-
-	/* Read operation ID */
-	status = smb_rd16(SECOCEC_READ_OPERATION_ID, &val);
-	if (status)
-		return;
-
-	msg.msg[1] = val;
-
-	/* Read data if present */
-	if (msg.len > 1) {
-		payload_len = msg.len - 2;
-		payload_msg = &msg.msg[2];
-
-		/* device stores 2 bytes in every 16-bit val */
-		for (i = 0; i < payload_len; i += 2) {
-			status = smb_rd16(SECOCEC_READ_DATA_00 + i / 2, &val);
-			if (status)
-				return;
-
-			/* low byte, skipping header */
-			payload_msg[i] = val & 0x00ff;
-
-			/* hi byte */
-			payload_msg[i + 1] = (val & 0xff00) >> 8;
-		}
-	}
-
-	cec_received_msg(cec->cec_adap, &msg);
-
-	/* Reset status reg */
-	status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK;
-	if (flag_overflow)
-		status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
-
-	status = smb_wr16(SECOCEC_STATUS, status_val);
-
-	return;
-
-rxerr:
-	/* Reset error reg */
-	status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK |
-		SECOCEC_STATUS_RX_ERROR_MASK;
-	if (flag_overflow)
-		status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
-	smb_wr16(SECOCEC_STATUS, status_val);
-}
-
-static const struct cec_adap_ops secocec_cec_adap_ops = {
-	/* Low-level callbacks */
-	.adap_enable = secocec_adap_enable,
-	.adap_log_addr = secocec_adap_log_addr,
-	.adap_transmit = secocec_adap_transmit,
-};
-
-#ifdef CONFIG_VIDEO_SECO_RC
-static int secocec_ir_probe(void *priv)
-{
-	struct secocec_data *cec = priv;
-	struct device *dev = cec->dev;
-	int status;
-	u16 val;
-
-	/* Prepare the RC input device */
-	cec->ir = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE);
-	if (!cec->ir)
-		return -ENOMEM;
-
-	snprintf(cec->ir_input_phys, sizeof(cec->ir_input_phys),
-		 "%s/input0", dev_name(dev));
-
-	cec->ir->device_name = dev_name(dev);
-	cec->ir->input_phys = cec->ir_input_phys;
-	cec->ir->input_id.bustype = BUS_HOST;
-	cec->ir->input_id.vendor = 0;
-	cec->ir->input_id.product = 0;
-	cec->ir->input_id.version = 1;
-	cec->ir->driver_name = SECOCEC_DEV_NAME;
-	cec->ir->allowed_protocols = RC_PROTO_BIT_RC5;
-	cec->ir->priv = cec;
-	cec->ir->map_name = RC_MAP_HAUPPAUGE;
-	cec->ir->timeout = MS_TO_NS(100);
-
-	/* Clear the status register */
-	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
-	if (status != 0)
-		goto err;
-
-	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
-	if (status != 0)
-		goto err;
-
-	/* Enable the interrupts */
-	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
-	if (status != 0)
-		goto err;
-
-	status = smb_wr16(SECOCEC_ENABLE_REG_1,
-			  val | SECOCEC_ENABLE_REG_1_IR);
-	if (status != 0)
-		goto err;
-
-	dev_dbg(dev, "IR enabled");
-
-	status = devm_rc_register_device(dev, cec->ir);
-
-	if (status) {
-		dev_err(dev, "Failed to prepare input device");
-		cec->ir = NULL;
-		goto err;
-	}
-
-	return 0;
-
-err:
-	smb_rd16(SECOCEC_ENABLE_REG_1, &val);
-
-	smb_wr16(SECOCEC_ENABLE_REG_1,
-		 val & ~SECOCEC_ENABLE_REG_1_IR);
-
-	dev_dbg(dev, "IR disabled");
-	return status;
-}
-
-static int secocec_ir_rx(struct secocec_data *priv)
-{
-	struct secocec_data *cec = priv;
-	struct device *dev = cec->dev;
-	u16 val, status, key, addr, toggle;
-
-	if (!cec->ir)
-		return -ENODEV;
-
-	status = smb_rd16(SECOCEC_IR_READ_DATA, &val);
-	if (status != 0)
-		goto err;
-
-	key = val & SECOCEC_IR_COMMAND_MASK;
-	addr = (val & SECOCEC_IR_ADDRESS_MASK) >> SECOCEC_IR_ADDRESS_SHL;
-	toggle = (val & SECOCEC_IR_TOGGLE_MASK) >> SECOCEC_IR_TOGGLE_SHL;
-
-	rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle);
-
-	dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x", key,
-		addr, toggle);
-
-	return 0;
-
-err:
-	dev_err(dev, "IR Receive message failed (%d)", status);
-	return -EIO;
-}
-#else
-static void secocec_ir_rx(struct secocec_data *priv)
-{
-}
-
-static int secocec_ir_probe(void *priv)
-{
-	return 0;
-}
-#endif
-
-static irqreturn_t secocec_irq_handler(int irq, void *priv)
-{
-	struct secocec_data *cec = priv;
-	struct device *dev = cec->dev;
-	u16 status_val, cec_val, val = 0;
-	int status;
-
-	/*  Read status register */
-	status = smb_rd16(SECOCEC_STATUS_REG_1, &status_val);
-	if (status)
-		goto err;
-
-	if (status_val & SECOCEC_STATUS_REG_1_CEC) {
-		/* Read CEC status register */
-		status = smb_rd16(SECOCEC_STATUS, &cec_val);
-		if (status)
-			goto err;
-
-		if (cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK)
-			secocec_rx_done(cec->cec_adap, cec_val);
-
-		if (cec_val & SECOCEC_STATUS_MSG_SENT_MASK)
-			secocec_tx_done(cec->cec_adap, cec_val);
-
-		if ((~cec_val & SECOCEC_STATUS_MSG_SENT_MASK) &&
-		    (~cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK))
-			dev_warn_once(dev,
-				      "Message not received or sent, but interrupt fired");
-
-		val = SECOCEC_STATUS_REG_1_CEC;
-	}
-
-	if (status_val & SECOCEC_STATUS_REG_1_IR) {
-		val |= SECOCEC_STATUS_REG_1_IR;
-
-		secocec_ir_rx(cec);
-	}
-
-	/*  Reset status register */
-	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
-	if (status)
-		goto err;
-
-	return IRQ_HANDLED;
-
-err:
-	dev_err_once(dev, "IRQ: R/W SMBus operation failed (%d)", status);
-
-	/*  Reset status register */
-	val = SECOCEC_STATUS_REG_1_CEC | SECOCEC_STATUS_REG_1_IR;
-	smb_wr16(SECOCEC_STATUS_REG_1, val);
-
-	return IRQ_HANDLED;
-}
-
-struct cec_dmi_match {
-	const char *sys_vendor;
-	const char *product_name;
-	const char *devname;
-	const char *conn;
-};
-
-static const struct cec_dmi_match secocec_dmi_match_table[] = {
-	/* UDOO X86 */
-	{ "SECO", "UDOO x86", "0000:00:02.0", "Port B" },
-};
-
-static struct device *secocec_cec_find_hdmi_dev(struct device *dev,
-						const char **conn)
-{
-	int i;
-
-	for (i = 0 ; i < ARRAY_SIZE(secocec_dmi_match_table) ; ++i) {
-		const struct cec_dmi_match *m = &secocec_dmi_match_table[i];
-
-		if (dmi_match(DMI_SYS_VENDOR, m->sys_vendor) &&
-		    dmi_match(DMI_PRODUCT_NAME, m->product_name)) {
-			struct device *d;
-
-			/* Find the device, bail out if not yet registered */
-			d = bus_find_device_by_name(&pci_bus_type, NULL,
-						    m->devname);
-			if (!d)
-				return ERR_PTR(-EPROBE_DEFER);
-
-			put_device(d);
-			*conn = m->conn;
-			return d;
-		}
-	}
-
-	return ERR_PTR(-EINVAL);
-}
-
-static int secocec_acpi_probe(struct secocec_data *sdev)
-{
-	struct device *dev = sdev->dev;
-	struct gpio_desc *gpio;
-	int irq = 0;
-
-	gpio = devm_gpiod_get(dev, NULL, GPIOF_IN);
-	if (IS_ERR(gpio)) {
-		dev_err(dev, "Cannot request interrupt gpio");
-		return PTR_ERR(gpio);
-	}
-
-	irq = gpiod_to_irq(gpio);
-	if (irq < 0) {
-		dev_err(dev, "Cannot find valid irq");
-		return -ENODEV;
-	}
-	dev_dbg(dev, "irq-gpio is bound to IRQ %d", irq);
-
-	sdev->irq = irq;
-
-	return 0;
-}
-
-static int secocec_probe(struct platform_device *pdev)
-{
-	struct secocec_data *secocec;
-	struct device *dev = &pdev->dev;
-	struct device *hdmi_dev;
-	const char *conn = NULL;
-	int ret;
-	u16 val;
-
-	hdmi_dev = secocec_cec_find_hdmi_dev(&pdev->dev, &conn);
-	if (IS_ERR(hdmi_dev))
-		return PTR_ERR(hdmi_dev);
-
-	secocec = devm_kzalloc(dev, sizeof(*secocec), GFP_KERNEL);
-	if (!secocec)
-		return -ENOMEM;
-
-	dev_set_drvdata(dev, secocec);
-
-	/* Request SMBus regions */
-	if (!request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")) {
-		dev_err(dev, "Request memory region failed");
-		return -ENXIO;
-	}
-
-	secocec->pdev = pdev;
-	secocec->dev = dev;
-
-	if (!has_acpi_companion(dev)) {
-		dev_dbg(dev, "Cannot find any ACPI companion");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	ret = secocec_acpi_probe(secocec);
-	if (ret) {
-		dev_err(dev, "Cannot assign gpio to IRQ");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	/* Firmware version check */
-	ret = smb_rd16(SECOCEC_VERSION, &val);
-	if (ret) {
-		dev_err(dev, "Cannot check fw version");
-		goto err;
-	}
-	if (val < SECOCEC_LATEST_FW) {
-		dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x",
-			val, SECOCEC_LATEST_FW);
-		ret = -EINVAL;
-		goto err;
-	}
-
-	ret = devm_request_threaded_irq(dev,
-					secocec->irq,
-					NULL,
-					secocec_irq_handler,
-					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-					dev_name(&pdev->dev), secocec);
-
-	if (ret) {
-		dev_err(dev, "Cannot request IRQ %d", secocec->irq);
-		ret = -EIO;
-		goto err;
-	}
-
-	/* Allocate CEC adapter */
-	secocec->cec_adap = cec_allocate_adapter(&secocec_cec_adap_ops,
-						 secocec,
-						 dev_name(dev),
-						 CEC_CAP_DEFAULTS |
-						 CEC_CAP_CONNECTOR_INFO,
-						 SECOCEC_MAX_ADDRS);
-
-	if (IS_ERR(secocec->cec_adap)) {
-		ret = PTR_ERR(secocec->cec_adap);
-		goto err;
-	}
-
-	secocec->notifier = cec_notifier_cec_adap_register(hdmi_dev, conn,
-							   secocec->cec_adap);
-	if (!secocec->notifier) {
-		ret = -ENOMEM;
-		goto err_delete_adapter;
-	}
-
-	ret = cec_register_adapter(secocec->cec_adap, dev);
-	if (ret)
-		goto err_notifier;
-
-	ret = secocec_ir_probe(secocec);
-	if (ret)
-		goto err_notifier;
-
-	platform_set_drvdata(pdev, secocec);
-
-	dev_dbg(dev, "Device registered");
-
-	return ret;
-
-err_notifier:
-	cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
-err_delete_adapter:
-	cec_delete_adapter(secocec->cec_adap);
-err:
-	release_region(BRA_SMB_BASE_ADDR, 7);
-	dev_err(dev, "%s device probe failed\n", dev_name(dev));
-
-	return ret;
-}
-
-static int secocec_remove(struct platform_device *pdev)
-{
-	struct secocec_data *secocec = platform_get_drvdata(pdev);
-	u16 val;
-
-	if (secocec->ir) {
-		smb_rd16(SECOCEC_ENABLE_REG_1, &val);
-
-		smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR);
-
-		dev_dbg(&pdev->dev, "IR disabled");
-	}
-	cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
-	cec_unregister_adapter(secocec->cec_adap);
-
-	release_region(BRA_SMB_BASE_ADDR, 7);
-
-	dev_dbg(&pdev->dev, "CEC device removed");
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int secocec_suspend(struct device *dev)
-{
-	int status;
-	u16 val;
-
-	dev_dbg(dev, "Device going to suspend, disabling");
-
-	/* Clear the status register */
-	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
-	if (status)
-		goto err;
-
-	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
-	if (status)
-		goto err;
-
-	/* Disable the interrupts */
-	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
-	if (status)
-		goto err;
-
-	status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
-			  ~SECOCEC_ENABLE_REG_1_CEC & ~SECOCEC_ENABLE_REG_1_IR);
-	if (status)
-		goto err;
-
-	return 0;
-
-err:
-	dev_err(dev, "Suspend failed (err: %d)", status);
-	return status;
-}
-
-static int secocec_resume(struct device *dev)
-{
-	int status;
-	u16 val;
-
-	dev_dbg(dev, "Resuming device from suspend");
-
-	/* Clear the status register */
-	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
-	if (status)
-		goto err;
-
-	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
-	if (status)
-		goto err;
-
-	/* Enable the interrupts */
-	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
-	if (status)
-		goto err;
-
-	status = smb_wr16(SECOCEC_ENABLE_REG_1, val | SECOCEC_ENABLE_REG_1_CEC);
-	if (status)
-		goto err;
-
-	dev_dbg(dev, "Device resumed from suspend");
-
-	return 0;
-
-err:
-	dev_err(dev, "Resume failed (err: %d)", status);
-	return status;
-}
-
-static SIMPLE_DEV_PM_OPS(secocec_pm_ops, secocec_suspend, secocec_resume);
-#define SECOCEC_PM_OPS (&secocec_pm_ops)
-#else
-#define SECOCEC_PM_OPS NULL
-#endif
-
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id secocec_acpi_match[] = {
-	{"CEC00001", 0},
-	{},
-};
-
-MODULE_DEVICE_TABLE(acpi, secocec_acpi_match);
-#endif
-
-static struct platform_driver secocec_driver = {
-	.driver = {
-		   .name = SECOCEC_DEV_NAME,
-		   .acpi_match_table = ACPI_PTR(secocec_acpi_match),
-		   .pm = SECOCEC_PM_OPS,
-	},
-	.probe = secocec_probe,
-	.remove = secocec_remove,
-};
-
-module_platform_driver(secocec_driver);
-
-MODULE_DESCRIPTION("SECO CEC X86 Driver");
-MODULE_AUTHOR("Ettore Chimenti <ek5.chimenti@gmail.com>");
-MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/media/platform/seco-cec/seco-cec.h b/drivers/media/platform/seco-cec/seco-cec.h
deleted file mode 100644
index 843de8c7dfd4..000000000000
--- a/drivers/media/platform/seco-cec/seco-cec.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
-/*
- * SECO X86 Boards CEC register defines
- *
- * Author:  Ettore Chimenti <ek5.chimenti@gmail.com>
- * Copyright (C) 2018, SECO Spa.
- * Copyright (C) 2018, Aidilab Srl.
- */
-
-#ifndef __SECO_CEC_H__
-#define __SECO_CEC_H__
-
-#define SECOCEC_MAX_ADDRS		1
-#define SECOCEC_DEV_NAME		"secocec"
-#define SECOCEC_LATEST_FW		0x0f0b
-
-#define SMBTIMEOUT			0xfff
-#define SMB_POLL_UDELAY			10
-
-#define SMBUS_WRITE			0
-#define SMBUS_READ			1
-
-#define CMD_BYTE_DATA			0
-#define CMD_WORD_DATA			1
-
-/*
- * SMBus definitons for Braswell
- */
-
-#define BRA_DONE_STATUS			BIT(7)
-#define BRA_INUSE_STS			BIT(6)
-#define BRA_FAILED_OP			BIT(4)
-#define BRA_BUS_ERR			BIT(3)
-#define BRA_DEV_ERR			BIT(2)
-#define BRA_INTR			BIT(1)
-#define BRA_HOST_BUSY			BIT(0)
-#define BRA_HSTS_ERR_MASK   (BRA_FAILED_OP | BRA_BUS_ERR | BRA_DEV_ERR)
-
-#define BRA_PEC_EN			BIT(7)
-#define BRA_START			BIT(6)
-#define BRA_LAST__BYTE			BIT(5)
-#define BRA_INTREN			BIT(0)
-#define BRA_SMB_CMD			(7 << 2)
-#define BRA_SMB_CMD_QUICK		(0 << 2)
-#define BRA_SMB_CMD_BYTE		(1 << 2)
-#define BRA_SMB_CMD_BYTE_DATA		(2 << 2)
-#define BRA_SMB_CMD_WORD_DATA		(3 << 2)
-#define BRA_SMB_CMD_PROCESS_CALL	(4 << 2)
-#define BRA_SMB_CMD_BLOCK		(5 << 2)
-#define BRA_SMB_CMD_I2CREAD		(6 << 2)
-#define BRA_SMB_CMD_BLOCK_PROCESS	(7 << 2)
-
-#define BRA_SMB_BASE_ADDR  0x2040
-#define HSTS               (BRA_SMB_BASE_ADDR + 0)
-#define HCNT               (BRA_SMB_BASE_ADDR + 2)
-#define HCMD               (BRA_SMB_BASE_ADDR + 3)
-#define XMIT_SLVA          (BRA_SMB_BASE_ADDR + 4)
-#define HDAT0              (BRA_SMB_BASE_ADDR + 5)
-#define HDAT1              (BRA_SMB_BASE_ADDR + 6)
-
-/*
- * Microcontroller Address
- */
-
-#define SECOCEC_MICRO_ADDRESS		0x40
-
-/*
- * STM32 SMBus Registers
- */
-
-#define SECOCEC_VERSION			0x00
-#define SECOCEC_ENABLE_REG_1		0x01
-#define SECOCEC_ENABLE_REG_2		0x02
-#define SECOCEC_STATUS_REG_1		0x03
-#define SECOCEC_STATUS_REG_2		0x04
-
-#define SECOCEC_STATUS			0x28
-#define SECOCEC_DEVICE_LA		0x29
-#define SECOCEC_READ_OPERATION_ID	0x2a
-#define SECOCEC_READ_DATA_LENGTH	0x2b
-#define SECOCEC_READ_DATA_00		0x2c
-#define SECOCEC_READ_DATA_02		0x2d
-#define SECOCEC_READ_DATA_04		0x2e
-#define SECOCEC_READ_DATA_06		0x2f
-#define SECOCEC_READ_DATA_08		0x30
-#define SECOCEC_READ_DATA_10		0x31
-#define SECOCEC_READ_DATA_12		0x32
-#define SECOCEC_READ_BYTE0		0x33
-#define SECOCEC_WRITE_OPERATION_ID	0x34
-#define SECOCEC_WRITE_DATA_LENGTH	0x35
-#define SECOCEC_WRITE_DATA_00		0x36
-#define SECOCEC_WRITE_DATA_02		0x37
-#define SECOCEC_WRITE_DATA_04		0x38
-#define SECOCEC_WRITE_DATA_06		0x39
-#define SECOCEC_WRITE_DATA_08		0x3a
-#define SECOCEC_WRITE_DATA_10		0x3b
-#define SECOCEC_WRITE_DATA_12		0x3c
-#define SECOCEC_WRITE_BYTE0		0x3d
-
-#define SECOCEC_IR_READ_DATA		0x3e
-
-/*
- * IR
- */
-
-#define SECOCEC_IR_COMMAND_MASK		0x007F
-#define SECOCEC_IR_COMMAND_SHL		0
-#define SECOCEC_IR_ADDRESS_MASK		0x1F00
-#define SECOCEC_IR_ADDRESS_SHL		8
-#define SECOCEC_IR_TOGGLE_MASK		0x8000
-#define SECOCEC_IR_TOGGLE_SHL		15
-
-/*
- * Enabling register
- */
-
-#define SECOCEC_ENABLE_REG_1_CEC		0x1000
-#define SECOCEC_ENABLE_REG_1_IR			0x2000
-#define SECOCEC_ENABLE_REG_1_IR_PASSTHROUGH	0x4000
-
-/*
- * Status register
- */
-
-#define SECOCEC_STATUS_REG_1_CEC	SECOCEC_ENABLE_REG_1_CEC
-#define SECOCEC_STATUS_REG_1_IR		SECOCEC_ENABLE_REG_1_IR
-#define SECOCEC_STATUS_REG_1_IR_PASSTHR	SECOCEC_ENABLE_REG_1_IR_PASSTHR
-
-/*
- * Status data
- */
-
-#define SECOCEC_STATUS_MSG_RECEIVED_MASK	BIT(0)
-#define SECOCEC_STATUS_RX_ERROR_MASK		BIT(1)
-#define SECOCEC_STATUS_MSG_SENT_MASK		BIT(2)
-#define SECOCEC_STATUS_TX_ERROR_MASK		BIT(3)
-
-#define SECOCEC_STATUS_TX_NACK_ERROR		BIT(4)
-#define SECOCEC_STATUS_RX_OVERFLOW_MASK		BIT(5)
-
-#endif /* __SECO_CEC_H__ */
diff --git a/drivers/media/platform/sti/cec/Makefile b/drivers/media/platform/sti/cec/Makefile
deleted file mode 100644
index d0c6b4ae94d6..000000000000
--- a/drivers/media/platform/sti/cec/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += stih-cec.o
diff --git a/drivers/media/platform/sti/cec/stih-cec.c b/drivers/media/platform/sti/cec/stih-cec.c
deleted file mode 100644
index f0c73e64b586..000000000000
--- a/drivers/media/platform/sti/cec/stih-cec.c
+++ /dev/null
@@ -1,400 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * STIH4xx CEC driver
- * Copyright (C) STMicroelectronics SA 2016
- *
- */
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-
-#include <media/cec.h>
-#include <media/cec-notifier.h>
-
-#define CEC_NAME	"stih-cec"
-
-/* CEC registers  */
-#define CEC_CLK_DIV           0x0
-#define CEC_CTRL              0x4
-#define CEC_IRQ_CTRL          0x8
-#define CEC_STATUS            0xC
-#define CEC_EXT_STATUS        0x10
-#define CEC_TX_CTRL           0x14
-#define CEC_FREE_TIME_THRESH  0x18
-#define CEC_BIT_TOUT_THRESH   0x1C
-#define CEC_BIT_PULSE_THRESH  0x20
-#define CEC_DATA              0x24
-#define CEC_TX_ARRAY_CTRL     0x28
-#define CEC_CTRL2             0x2C
-#define CEC_TX_ERROR_STS      0x30
-#define CEC_ADDR_TABLE        0x34
-#define CEC_DATA_ARRAY_CTRL   0x38
-#define CEC_DATA_ARRAY_STATUS 0x3C
-#define CEC_TX_DATA_BASE      0x40
-#define CEC_TX_DATA_TOP       0x50
-#define CEC_TX_DATA_SIZE      0x1
-#define CEC_RX_DATA_BASE      0x54
-#define CEC_RX_DATA_TOP       0x64
-#define CEC_RX_DATA_SIZE      0x1
-
-/* CEC_CTRL2 */
-#define CEC_LINE_INACTIVE_EN   BIT(0)
-#define CEC_AUTO_BUS_ERR_EN    BIT(1)
-#define CEC_STOP_ON_ARB_ERR_EN BIT(2)
-#define CEC_TX_REQ_WAIT_EN     BIT(3)
-
-/* CEC_DATA_ARRAY_CTRL */
-#define CEC_TX_ARRAY_EN          BIT(0)
-#define CEC_RX_ARRAY_EN          BIT(1)
-#define CEC_TX_ARRAY_RESET       BIT(2)
-#define CEC_RX_ARRAY_RESET       BIT(3)
-#define CEC_TX_N_OF_BYTES_IRQ_EN BIT(4)
-#define CEC_TX_STOP_ON_NACK      BIT(7)
-
-/* CEC_TX_ARRAY_CTRL */
-#define CEC_TX_N_OF_BYTES  0x1F
-#define CEC_TX_START       BIT(5)
-#define CEC_TX_AUTO_SOM_EN BIT(6)
-#define CEC_TX_AUTO_EOM_EN BIT(7)
-
-/* CEC_IRQ_CTRL */
-#define CEC_TX_DONE_IRQ_EN   BIT(0)
-#define CEC_ERROR_IRQ_EN     BIT(2)
-#define CEC_RX_DONE_IRQ_EN   BIT(3)
-#define CEC_RX_SOM_IRQ_EN    BIT(4)
-#define CEC_RX_EOM_IRQ_EN    BIT(5)
-#define CEC_FREE_TIME_IRQ_EN BIT(6)
-#define CEC_PIN_STS_IRQ_EN   BIT(7)
-
-/* CEC_CTRL */
-#define CEC_IN_FILTER_EN    BIT(0)
-#define CEC_PWR_SAVE_EN     BIT(1)
-#define CEC_EN              BIT(4)
-#define CEC_ACK_CTRL        BIT(5)
-#define CEC_RX_RESET_EN     BIT(6)
-#define CEC_IGNORE_RX_ERROR BIT(7)
-
-/* CEC_STATUS */
-#define CEC_TX_DONE_STS       BIT(0)
-#define CEC_TX_ACK_GET_STS    BIT(1)
-#define CEC_ERROR_STS         BIT(2)
-#define CEC_RX_DONE_STS       BIT(3)
-#define CEC_RX_SOM_STS        BIT(4)
-#define CEC_RX_EOM_STS        BIT(5)
-#define CEC_FREE_TIME_IRQ_STS BIT(6)
-#define CEC_PIN_STS           BIT(7)
-#define CEC_SBIT_TOUT_STS     BIT(8)
-#define CEC_DBIT_TOUT_STS     BIT(9)
-#define CEC_LPULSE_ERROR_STS  BIT(10)
-#define CEC_HPULSE_ERROR_STS  BIT(11)
-#define CEC_TX_ERROR          BIT(12)
-#define CEC_TX_ARB_ERROR      BIT(13)
-#define CEC_RX_ERROR_MIN      BIT(14)
-#define CEC_RX_ERROR_MAX      BIT(15)
-
-/* Signal free time in bit periods (2.4ms) */
-#define CEC_PRESENT_INIT_SFT 7
-#define CEC_NEW_INIT_SFT     5
-#define CEC_RETRANSMIT_SFT   3
-
-/* Constants for CEC_BIT_TOUT_THRESH register */
-#define CEC_SBIT_TOUT_47MS BIT(1)
-#define CEC_SBIT_TOUT_48MS (BIT(0) | BIT(1))
-#define CEC_SBIT_TOUT_50MS BIT(2)
-#define CEC_DBIT_TOUT_27MS BIT(0)
-#define CEC_DBIT_TOUT_28MS BIT(1)
-#define CEC_DBIT_TOUT_29MS (BIT(0) | BIT(1))
-
-/* Constants for CEC_BIT_PULSE_THRESH register */
-#define CEC_BIT_LPULSE_03MS BIT(1)
-#define CEC_BIT_HPULSE_03MS BIT(3)
-
-/* Constants for CEC_DATA_ARRAY_STATUS register */
-#define CEC_RX_N_OF_BYTES                     0x1F
-#define CEC_TX_N_OF_BYTES_SENT                BIT(5)
-#define CEC_RX_OVERRUN                        BIT(6)
-
-struct stih_cec {
-	struct cec_adapter	*adap;
-	struct device		*dev;
-	struct clk		*clk;
-	void __iomem		*regs;
-	int			irq;
-	u32			irq_status;
-	struct cec_notifier	*notifier;
-};
-
-static int stih_cec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct stih_cec *cec = cec_get_drvdata(adap);
-
-	if (enable) {
-		/* The doc says (input TCLK_PERIOD * CEC_CLK_DIV) = 0.1ms */
-		unsigned long clk_freq = clk_get_rate(cec->clk);
-		u32 cec_clk_div = clk_freq / 10000;
-
-		writel(cec_clk_div, cec->regs + CEC_CLK_DIV);
-
-		/* Configuration of the durations activating a timeout */
-		writel(CEC_SBIT_TOUT_47MS | (CEC_DBIT_TOUT_28MS << 4),
-		       cec->regs + CEC_BIT_TOUT_THRESH);
-
-		/* Configuration of the smallest allowed duration for pulses */
-		writel(CEC_BIT_LPULSE_03MS | CEC_BIT_HPULSE_03MS,
-		       cec->regs + CEC_BIT_PULSE_THRESH);
-
-		/* Minimum received bit period threshold */
-		writel(BIT(5) | BIT(7), cec->regs + CEC_TX_CTRL);
-
-		/* Configuration of transceiver data arrays */
-		writel(CEC_TX_ARRAY_EN | CEC_RX_ARRAY_EN | CEC_TX_STOP_ON_NACK,
-		       cec->regs + CEC_DATA_ARRAY_CTRL);
-
-		/* Configuration of the control bits for CEC Transceiver */
-		writel(CEC_IN_FILTER_EN | CEC_EN | CEC_RX_RESET_EN,
-		       cec->regs + CEC_CTRL);
-
-		/* Clear logical addresses */
-		writel(0, cec->regs + CEC_ADDR_TABLE);
-
-		/* Clear the status register */
-		writel(0x0, cec->regs + CEC_STATUS);
-
-		/* Enable the interrupts */
-		writel(CEC_TX_DONE_IRQ_EN | CEC_RX_DONE_IRQ_EN |
-		       CEC_RX_SOM_IRQ_EN | CEC_RX_EOM_IRQ_EN |
-		       CEC_ERROR_IRQ_EN,
-		       cec->regs + CEC_IRQ_CTRL);
-
-	} else {
-		/* Clear logical addresses */
-		writel(0, cec->regs + CEC_ADDR_TABLE);
-
-		/* Clear the status register */
-		writel(0x0, cec->regs + CEC_STATUS);
-
-		/* Disable the interrupts */
-		writel(0, cec->regs + CEC_IRQ_CTRL);
-	}
-
-	return 0;
-}
-
-static int stih_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
-{
-	struct stih_cec *cec = cec_get_drvdata(adap);
-	u32 reg = readl(cec->regs + CEC_ADDR_TABLE);
-
-	reg |= 1 << logical_addr;
-
-	if (logical_addr == CEC_LOG_ADDR_INVALID)
-		reg = 0;
-
-	writel(reg, cec->regs + CEC_ADDR_TABLE);
-
-	return 0;
-}
-
-static int stih_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
-				  u32 signal_free_time, struct cec_msg *msg)
-{
-	struct stih_cec *cec = cec_get_drvdata(adap);
-	int i;
-
-	/* Copy message into registers */
-	for (i = 0; i < msg->len; i++)
-		writeb(msg->msg[i], cec->regs + CEC_TX_DATA_BASE + i);
-
-	/*
-	 * Start transmission, configure hardware to add start and stop bits
-	 * Signal free time is handled by the hardware
-	 */
-	writel(CEC_TX_AUTO_SOM_EN | CEC_TX_AUTO_EOM_EN | CEC_TX_START |
-	       msg->len, cec->regs + CEC_TX_ARRAY_CTRL);
-
-	return 0;
-}
-
-static void stih_tx_done(struct stih_cec *cec, u32 status)
-{
-	if (status & CEC_TX_ERROR) {
-		cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_ERROR);
-		return;
-	}
-
-	if (status & CEC_TX_ARB_ERROR) {
-		cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_ARB_LOST);
-		return;
-	}
-
-	if (!(status & CEC_TX_ACK_GET_STS)) {
-		cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_NACK);
-		return;
-	}
-
-	cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_OK);
-}
-
-static void stih_rx_done(struct stih_cec *cec, u32 status)
-{
-	struct cec_msg msg = {};
-	u8 i;
-
-	if (status & CEC_RX_ERROR_MIN)
-		return;
-
-	if (status & CEC_RX_ERROR_MAX)
-		return;
-
-	msg.len = readl(cec->regs + CEC_DATA_ARRAY_STATUS) & 0x1f;
-
-	if (!msg.len)
-		return;
-
-	if (msg.len > 16)
-		msg.len = 16;
-
-	for (i = 0; i < msg.len; i++)
-		msg.msg[i] = readl(cec->regs + CEC_RX_DATA_BASE + i);
-
-	cec_received_msg(cec->adap, &msg);
-}
-
-static irqreturn_t stih_cec_irq_handler_thread(int irq, void *priv)
-{
-	struct stih_cec *cec = priv;
-
-	if (cec->irq_status & CEC_TX_DONE_STS)
-		stih_tx_done(cec, cec->irq_status);
-
-	if (cec->irq_status & CEC_RX_DONE_STS)
-		stih_rx_done(cec, cec->irq_status);
-
-	cec->irq_status = 0;
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t stih_cec_irq_handler(int irq, void *priv)
-{
-	struct stih_cec *cec = priv;
-
-	cec->irq_status = readl(cec->regs + CEC_STATUS);
-	writel(cec->irq_status, cec->regs + CEC_STATUS);
-
-	return IRQ_WAKE_THREAD;
-}
-
-static const struct cec_adap_ops sti_cec_adap_ops = {
-	.adap_enable = stih_cec_adap_enable,
-	.adap_log_addr = stih_cec_adap_log_addr,
-	.adap_transmit = stih_cec_adap_transmit,
-};
-
-static int stih_cec_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct resource *res;
-	struct stih_cec *cec;
-	struct device *hdmi_dev;
-	int ret;
-
-	hdmi_dev = cec_notifier_parse_hdmi_phandle(dev);
-
-	if (IS_ERR(hdmi_dev))
-		return PTR_ERR(hdmi_dev);
-
-	cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL);
-	if (!cec)
-		return -ENOMEM;
-
-	cec->dev = dev;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	cec->regs = devm_ioremap_resource(dev, res);
-	if (IS_ERR(cec->regs))
-		return PTR_ERR(cec->regs);
-
-	cec->irq = platform_get_irq(pdev, 0);
-	if (cec->irq < 0)
-		return cec->irq;
-
-	ret = devm_request_threaded_irq(dev, cec->irq, stih_cec_irq_handler,
-					stih_cec_irq_handler_thread, 0,
-					pdev->name, cec);
-	if (ret)
-		return ret;
-
-	cec->clk = devm_clk_get(dev, "cec-clk");
-	if (IS_ERR(cec->clk)) {
-		dev_err(dev, "Cannot get cec clock\n");
-		return PTR_ERR(cec->clk);
-	}
-
-	cec->adap = cec_allocate_adapter(&sti_cec_adap_ops, cec, CEC_NAME,
-					 CEC_CAP_DEFAULTS |
-					 CEC_CAP_CONNECTOR_INFO,
-					 CEC_MAX_LOG_ADDRS);
-	ret = PTR_ERR_OR_ZERO(cec->adap);
-	if (ret)
-		return ret;
-
-	cec->notifier = cec_notifier_cec_adap_register(hdmi_dev, NULL,
-						       cec->adap);
-	if (!cec->notifier) {
-		ret = -ENOMEM;
-		goto err_delete_adapter;
-	}
-
-	ret = cec_register_adapter(cec->adap, &pdev->dev);
-	if (ret)
-		goto err_notifier;
-
-	platform_set_drvdata(pdev, cec);
-	return 0;
-
-err_notifier:
-	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
-
-err_delete_adapter:
-	cec_delete_adapter(cec->adap);
-	return ret;
-}
-
-static int stih_cec_remove(struct platform_device *pdev)
-{
-	struct stih_cec *cec = platform_get_drvdata(pdev);
-
-	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
-	cec_unregister_adapter(cec->adap);
-
-	return 0;
-}
-
-static const struct of_device_id stih_cec_match[] = {
-	{
-		.compatible	= "st,stih-cec",
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, stih_cec_match);
-
-static struct platform_driver stih_cec_pdrv = {
-	.probe	= stih_cec_probe,
-	.remove = stih_cec_remove,
-	.driver = {
-		.name		= CEC_NAME,
-		.of_match_table	= stih_cec_match,
-	},
-};
-
-module_platform_driver(stih_cec_pdrv);
-
-MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@linaro.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("STIH4xx CEC driver");
diff --git a/drivers/media/platform/sti/delta/delta-ipc.c b/drivers/media/platform/sti/delta/delta-ipc.c
index 186d88f02ecd..371429d81ea1 100644
--- a/drivers/media/platform/sti/delta/delta-ipc.c
+++ b/drivers/media/platform/sti/delta/delta-ipc.c
@@ -175,8 +175,8 @@ int delta_ipc_open(struct delta_ctx *pctx, const char *name,
 	msg.ipc_buf_size = ipc_buf_size;
 	msg.ipc_buf_paddr = ctx->ipc_buf->paddr;
 
-	memcpy(msg.name, name, sizeof(msg.name));
-	msg.name[sizeof(msg.name) - 1] = 0;
+	memset(msg.name, 0, sizeof(msg.name));
+	strcpy(msg.name, name);
 
 	msg.param_size = param->size;
 	memcpy(ctx->ipc_buf->vaddr, param->data, msg.param_size);
diff --git a/drivers/media/platform/stm32/Makefile b/drivers/media/platform/stm32/Makefile
index 5ed73599ca44..48b36db2c2e2 100644
--- a/drivers/media/platform/stm32/Makefile
+++ b/drivers/media/platform/stm32/Makefile
@@ -1,3 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32-dcmi.o
-obj-$(CONFIG_VIDEO_STM32_HDMI_CEC) += stm32-cec.o
diff --git a/drivers/media/platform/stm32/stm32-cec.c b/drivers/media/platform/stm32/stm32-cec.c
deleted file mode 100644
index ea4b1ebfca99..000000000000
--- a/drivers/media/platform/stm32/stm32-cec.c
+++ /dev/null
@@ -1,374 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * STM32 CEC driver
- * Copyright (C) STMicroelectronics SA 2017
- *
- */
-
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-
-#include <media/cec.h>
-
-#define CEC_NAME	"stm32-cec"
-
-/* CEC registers  */
-#define CEC_CR		0x0000 /* Control Register */
-#define CEC_CFGR	0x0004 /* ConFiGuration Register */
-#define CEC_TXDR	0x0008 /* Rx data Register */
-#define CEC_RXDR	0x000C /* Rx data Register */
-#define CEC_ISR		0x0010 /* Interrupt and status Register */
-#define CEC_IER		0x0014 /* Interrupt enable Register */
-
-#define TXEOM		BIT(2)
-#define TXSOM		BIT(1)
-#define CECEN		BIT(0)
-
-#define LSTN		BIT(31)
-#define OAR		GENMASK(30, 16)
-#define SFTOP		BIT(8)
-#define BRDNOGEN	BIT(7)
-#define LBPEGEN		BIT(6)
-#define BREGEN		BIT(5)
-#define BRESTP		BIT(4)
-#define RXTOL		BIT(3)
-#define SFT		GENMASK(2, 0)
-#define FULL_CFG	(LSTN | SFTOP | BRDNOGEN | LBPEGEN | BREGEN | BRESTP \
-			 | RXTOL)
-
-#define TXACKE		BIT(12)
-#define TXERR		BIT(11)
-#define TXUDR		BIT(10)
-#define TXEND		BIT(9)
-#define TXBR		BIT(8)
-#define ARBLST		BIT(7)
-#define RXACKE		BIT(6)
-#define RXOVR		BIT(2)
-#define RXEND		BIT(1)
-#define RXBR		BIT(0)
-
-#define ALL_TX_IT	(TXEND | TXBR | TXACKE | TXERR | TXUDR | ARBLST)
-#define ALL_RX_IT	(RXEND | RXBR | RXACKE | RXOVR)
-
-/*
- * 400 ms is the time it takes for one 16 byte message to be
- * transferred and 5 is the maximum number of retries. Add
- * another 100 ms as a margin.
- */
-#define CEC_XFER_TIMEOUT_MS (5 * 400 + 100)
-
-struct stm32_cec {
-	struct cec_adapter	*adap;
-	struct device		*dev;
-	struct clk		*clk_cec;
-	struct clk		*clk_hdmi_cec;
-	struct reset_control	*rstc;
-	struct regmap		*regmap;
-	int			irq;
-	u32			irq_status;
-	struct cec_msg		rx_msg;
-	struct cec_msg		tx_msg;
-	int			tx_cnt;
-};
-
-static void cec_hw_init(struct stm32_cec *cec)
-{
-	regmap_update_bits(cec->regmap, CEC_CR, TXEOM | TXSOM | CECEN, 0);
-
-	regmap_update_bits(cec->regmap, CEC_IER, ALL_TX_IT | ALL_RX_IT,
-			   ALL_TX_IT | ALL_RX_IT);
-
-	regmap_update_bits(cec->regmap, CEC_CFGR, FULL_CFG, FULL_CFG);
-}
-
-static void stm32_tx_done(struct stm32_cec *cec, u32 status)
-{
-	if (status & (TXERR | TXUDR)) {
-		cec_transmit_done(cec->adap, CEC_TX_STATUS_ERROR,
-				  0, 0, 0, 1);
-		return;
-	}
-
-	if (status & ARBLST) {
-		cec_transmit_done(cec->adap, CEC_TX_STATUS_ARB_LOST,
-				  1, 0, 0, 0);
-		return;
-	}
-
-	if (status & TXACKE) {
-		cec_transmit_done(cec->adap, CEC_TX_STATUS_NACK,
-				  0, 1, 0, 0);
-		return;
-	}
-
-	if (cec->irq_status & TXBR) {
-		/* send next byte */
-		if (cec->tx_cnt < cec->tx_msg.len)
-			regmap_write(cec->regmap, CEC_TXDR,
-				     cec->tx_msg.msg[cec->tx_cnt++]);
-
-		/* TXEOM is set to command transmission of the last byte */
-		if (cec->tx_cnt == cec->tx_msg.len)
-			regmap_update_bits(cec->regmap, CEC_CR, TXEOM, TXEOM);
-	}
-
-	if (cec->irq_status & TXEND)
-		cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
-}
-
-static void stm32_rx_done(struct stm32_cec *cec, u32 status)
-{
-	if (cec->irq_status & (RXACKE | RXOVR)) {
-		cec->rx_msg.len = 0;
-		return;
-	}
-
-	if (cec->irq_status & RXBR) {
-		u32 val;
-
-		regmap_read(cec->regmap, CEC_RXDR, &val);
-		cec->rx_msg.msg[cec->rx_msg.len++] = val & 0xFF;
-	}
-
-	if (cec->irq_status & RXEND) {
-		cec_received_msg(cec->adap, &cec->rx_msg);
-		cec->rx_msg.len = 0;
-	}
-}
-
-static irqreturn_t stm32_cec_irq_thread(int irq, void *arg)
-{
-	struct stm32_cec *cec = arg;
-
-	if (cec->irq_status & ALL_TX_IT)
-		stm32_tx_done(cec, cec->irq_status);
-
-	if (cec->irq_status & ALL_RX_IT)
-		stm32_rx_done(cec, cec->irq_status);
-
-	cec->irq_status = 0;
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t stm32_cec_irq_handler(int irq, void *arg)
-{
-	struct stm32_cec *cec = arg;
-
-	regmap_read(cec->regmap, CEC_ISR, &cec->irq_status);
-
-	regmap_update_bits(cec->regmap, CEC_ISR,
-			   ALL_TX_IT | ALL_RX_IT,
-			   ALL_TX_IT | ALL_RX_IT);
-
-	return IRQ_WAKE_THREAD;
-}
-
-static int stm32_cec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct stm32_cec *cec = adap->priv;
-	int ret = 0;
-
-	if (enable) {
-		ret = clk_enable(cec->clk_cec);
-		if (ret)
-			dev_err(cec->dev, "fail to enable cec clock\n");
-
-		clk_enable(cec->clk_hdmi_cec);
-		regmap_update_bits(cec->regmap, CEC_CR, CECEN, CECEN);
-	} else {
-		clk_disable(cec->clk_cec);
-		clk_disable(cec->clk_hdmi_cec);
-		regmap_update_bits(cec->regmap, CEC_CR, CECEN, 0);
-	}
-
-	return ret;
-}
-
-static int stm32_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
-{
-	struct stm32_cec *cec = adap->priv;
-	u32 oar = (1 << logical_addr) << 16;
-	u32 val;
-
-	/* Poll every 100µs the register CEC_CR to wait end of transmission */
-	regmap_read_poll_timeout(cec->regmap, CEC_CR, val, !(val & TXSOM),
-				 100, CEC_XFER_TIMEOUT_MS * 1000);
-	regmap_update_bits(cec->regmap, CEC_CR, CECEN, 0);
-
-	if (logical_addr == CEC_LOG_ADDR_INVALID)
-		regmap_update_bits(cec->regmap, CEC_CFGR, OAR, 0);
-	else
-		regmap_update_bits(cec->regmap, CEC_CFGR, oar, oar);
-
-	regmap_update_bits(cec->regmap, CEC_CR, CECEN, CECEN);
-
-	return 0;
-}
-
-static int stm32_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
-				   u32 signal_free_time, struct cec_msg *msg)
-{
-	struct stm32_cec *cec = adap->priv;
-
-	/* Copy message */
-	cec->tx_msg = *msg;
-	cec->tx_cnt = 0;
-
-	/*
-	 * If the CEC message consists of only one byte,
-	 * TXEOM must be set before of TXSOM.
-	 */
-	if (cec->tx_msg.len == 1)
-		regmap_update_bits(cec->regmap, CEC_CR, TXEOM, TXEOM);
-
-	/* TXSOM is set to command transmission of the first byte */
-	regmap_update_bits(cec->regmap, CEC_CR, TXSOM, TXSOM);
-
-	/* Write the header (first byte of message) */
-	regmap_write(cec->regmap, CEC_TXDR, cec->tx_msg.msg[0]);
-	cec->tx_cnt++;
-
-	return 0;
-}
-
-static const struct cec_adap_ops stm32_cec_adap_ops = {
-	.adap_enable = stm32_cec_adap_enable,
-	.adap_log_addr = stm32_cec_adap_log_addr,
-	.adap_transmit = stm32_cec_adap_transmit,
-};
-
-static const struct regmap_config stm32_cec_regmap_cfg = {
-	.reg_bits = 32,
-	.val_bits = 32,
-	.reg_stride = sizeof(u32),
-	.max_register = 0x14,
-	.fast_io = true,
-};
-
-static int stm32_cec_probe(struct platform_device *pdev)
-{
-	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_PHYS_ADDR | CEC_MODE_MONITOR_ALL;
-	struct resource *res;
-	struct stm32_cec *cec;
-	void __iomem *mmio;
-	int ret;
-
-	cec = devm_kzalloc(&pdev->dev, sizeof(*cec), GFP_KERNEL);
-	if (!cec)
-		return -ENOMEM;
-
-	cec->dev = &pdev->dev;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mmio = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(mmio))
-		return PTR_ERR(mmio);
-
-	cec->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "cec", mmio,
-						&stm32_cec_regmap_cfg);
-
-	if (IS_ERR(cec->regmap))
-		return PTR_ERR(cec->regmap);
-
-	cec->irq = platform_get_irq(pdev, 0);
-	if (cec->irq < 0)
-		return cec->irq;
-
-	ret = devm_request_threaded_irq(&pdev->dev, cec->irq,
-					stm32_cec_irq_handler,
-					stm32_cec_irq_thread,
-					0,
-					pdev->name, cec);
-	if (ret)
-		return ret;
-
-	cec->clk_cec = devm_clk_get(&pdev->dev, "cec");
-	if (IS_ERR(cec->clk_cec)) {
-		if (PTR_ERR(cec->clk_cec) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Cannot get cec clock\n");
-
-		return PTR_ERR(cec->clk_cec);
-	}
-
-	ret = clk_prepare(cec->clk_cec);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to prepare cec clock\n");
-		return ret;
-	}
-
-	cec->clk_hdmi_cec = devm_clk_get(&pdev->dev, "hdmi-cec");
-	if (IS_ERR(cec->clk_hdmi_cec) &&
-	    PTR_ERR(cec->clk_hdmi_cec) == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-
-	if (!IS_ERR(cec->clk_hdmi_cec)) {
-		ret = clk_prepare(cec->clk_hdmi_cec);
-		if (ret) {
-			dev_err(&pdev->dev, "Can't prepare hdmi-cec clock\n");
-			return ret;
-		}
-	}
-
-	/*
-	 * CEC_CAP_PHYS_ADDR caps should be removed when a cec notifier is
-	 * available for example when a drm driver can provide edid
-	 */
-	cec->adap = cec_allocate_adapter(&stm32_cec_adap_ops, cec,
-			CEC_NAME, caps,	CEC_MAX_LOG_ADDRS);
-	ret = PTR_ERR_OR_ZERO(cec->adap);
-	if (ret)
-		return ret;
-
-	ret = cec_register_adapter(cec->adap, &pdev->dev);
-	if (ret) {
-		cec_delete_adapter(cec->adap);
-		return ret;
-	}
-
-	cec_hw_init(cec);
-
-	platform_set_drvdata(pdev, cec);
-
-	return 0;
-}
-
-static int stm32_cec_remove(struct platform_device *pdev)
-{
-	struct stm32_cec *cec = platform_get_drvdata(pdev);
-
-	clk_unprepare(cec->clk_cec);
-	clk_unprepare(cec->clk_hdmi_cec);
-
-	cec_unregister_adapter(cec->adap);
-
-	return 0;
-}
-
-static const struct of_device_id stm32_cec_of_match[] = {
-	{ .compatible = "st,stm32-cec" },
-	{ /* end node */ }
-};
-MODULE_DEVICE_TABLE(of, stm32_cec_of_match);
-
-static struct platform_driver stm32_cec_driver = {
-	.probe  = stm32_cec_probe,
-	.remove = stm32_cec_remove,
-	.driver = {
-		.name		= CEC_NAME,
-		.of_match_table = stm32_cec_of_match,
-	},
-};
-
-module_platform_driver(stm32_cec_driver);
-
-MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
-MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
-MODULE_DESCRIPTION("STMicroelectronics STM32 Consumer Electronics Control");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/platform/sunxi/Kconfig b/drivers/media/platform/sunxi/Kconfig
index 71808e93ac2e..7151cc249afa 100644
--- a/drivers/media/platform/sunxi/Kconfig
+++ b/drivers/media/platform/sunxi/Kconfig
@@ -1,2 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
 source "drivers/media/platform/sunxi/sun4i-csi/Kconfig"
 source "drivers/media/platform/sunxi/sun6i-csi/Kconfig"
diff --git a/drivers/media/platform/sunxi/Makefile b/drivers/media/platform/sunxi/Makefile
index ff0993f70dc3..fc537c9f5ca9 100644
--- a/drivers/media/platform/sunxi/Makefile
+++ b/drivers/media/platform/sunxi/Makefile
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
 obj-y		+= sun4i-csi/
 obj-y		+= sun6i-csi/
 obj-y		+= sun8i-di/
diff --git a/drivers/media/platform/sunxi/sun4i-csi/Kconfig b/drivers/media/platform/sunxi/sun4i-csi/Kconfig
index e86e29b6a603..903c6152f6e8 100644
--- a/drivers/media/platform/sunxi/sun4i-csi/Kconfig
+++ b/drivers/media/platform/sunxi/sun4i-csi/Kconfig
@@ -1,7 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+
 config VIDEO_SUN4I_CSI
 	tristate "Allwinner A10 CMOS Sensor Interface Support"
-	depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API && HAS_DMA
+	depends on VIDEO_V4L2 && COMMON_CLK  && HAS_DMA
 	depends on ARCH_SUNXI || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_FWNODE
 	help
diff --git a/drivers/media/platform/sunxi/sun4i-csi/Makefile b/drivers/media/platform/sunxi/sun4i-csi/Makefile
index 7c790a57f5ee..5062b006d63e 100644
--- a/drivers/media/platform/sunxi/sun4i-csi/Makefile
+++ b/drivers/media/platform/sunxi/sun4i-csi/Makefile
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
 sun4i-csi-y += sun4i_csi.o
 sun4i-csi-y += sun4i_dma.o
 sun4i-csi-y += sun4i_v4l2.o
diff --git a/drivers/media/platform/sunxi/sun6i-csi/Kconfig b/drivers/media/platform/sunxi/sun6i-csi/Kconfig
index 269b3ebf4f52..586e3fb3a80d 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/Kconfig
+++ b/drivers/media/platform/sunxi/sun6i-csi/Kconfig
@@ -1,8 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config VIDEO_SUN6I_CSI
 	tristate "Allwinner V3s Camera Sensor Interface driver"
-	depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API && HAS_DMA
+	depends on VIDEO_V4L2 && COMMON_CLK  && HAS_DMA
 	depends on ARCH_SUNXI || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	select REGMAP_MMIO
 	select V4L2_FWNODE
diff --git a/drivers/media/platform/tegra-cec/Makefile b/drivers/media/platform/tegra-cec/Makefile
deleted file mode 100644
index 97e57c7493c0..000000000000
--- a/drivers/media/platform/tegra-cec/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_TEGRA_HDMI_CEC)	+= tegra_cec.o
diff --git a/drivers/media/platform/tegra-cec/tegra_cec.c b/drivers/media/platform/tegra-cec/tegra_cec.c
deleted file mode 100644
index 1ac0c70a5981..000000000000
--- a/drivers/media/platform/tegra-cec/tegra_cec.c
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Tegra CEC implementation
- *
- * The original 3.10 CEC driver using a custom API:
- *
- * Copyright (c) 2012-2015, NVIDIA CORPORATION.  All rights reserved.
- *
- * Conversion to the CEC framework and to the mainline kernel:
- *
- * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/clk/tegra.h>
-
-#include <media/cec-notifier.h>
-
-#include "tegra_cec.h"
-
-#define TEGRA_CEC_NAME "tegra-cec"
-
-struct tegra_cec {
-	struct cec_adapter	*adap;
-	struct device		*dev;
-	struct clk		*clk;
-	void __iomem		*cec_base;
-	struct cec_notifier	*notifier;
-	int			tegra_cec_irq;
-	bool			rx_done;
-	bool			tx_done;
-	int			tx_status;
-	u8			rx_buf[CEC_MAX_MSG_SIZE];
-	u8			rx_buf_cnt;
-	u32			tx_buf[CEC_MAX_MSG_SIZE];
-	u8			tx_buf_cur;
-	u8			tx_buf_cnt;
-};
-
-static inline u32 cec_read(struct tegra_cec *cec, u32 reg)
-{
-	return readl(cec->cec_base + reg);
-}
-
-static inline void cec_write(struct tegra_cec *cec, u32 reg, u32 val)
-{
-	writel(val, cec->cec_base + reg);
-}
-
-static void tegra_cec_error_recovery(struct tegra_cec *cec)
-{
-	u32 hw_ctrl;
-
-	hw_ctrl = cec_read(cec, TEGRA_CEC_HW_CONTROL);
-	cec_write(cec, TEGRA_CEC_HW_CONTROL, 0);
-	cec_write(cec, TEGRA_CEC_INT_STAT, 0xffffffff);
-	cec_write(cec, TEGRA_CEC_HW_CONTROL, hw_ctrl);
-}
-
-static irqreturn_t tegra_cec_irq_thread_handler(int irq, void *data)
-{
-	struct device *dev = data;
-	struct tegra_cec *cec = dev_get_drvdata(dev);
-
-	if (cec->tx_done) {
-		cec_transmit_attempt_done(cec->adap, cec->tx_status);
-		cec->tx_done = false;
-	}
-	if (cec->rx_done) {
-		struct cec_msg msg = {};
-
-		msg.len = cec->rx_buf_cnt;
-		memcpy(msg.msg, cec->rx_buf, msg.len);
-		cec_received_msg(cec->adap, &msg);
-		cec->rx_done = false;
-		cec->rx_buf_cnt = 0;
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t tegra_cec_irq_handler(int irq, void *data)
-{
-	struct device *dev = data;
-	struct tegra_cec *cec = dev_get_drvdata(dev);
-	u32 status, mask;
-
-	status = cec_read(cec, TEGRA_CEC_INT_STAT);
-	mask = cec_read(cec, TEGRA_CEC_INT_MASK);
-
-	status &= mask;
-
-	if (!status)
-		return IRQ_HANDLED;
-
-	if (status & TEGRA_CEC_INT_STAT_TX_REGISTER_UNDERRUN) {
-		dev_err(dev, "TX underrun, interrupt timing issue!\n");
-
-		tegra_cec_error_recovery(cec);
-		cec_write(cec, TEGRA_CEC_INT_MASK,
-			  mask & ~TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY);
-
-		cec->tx_done = true;
-		cec->tx_status = CEC_TX_STATUS_ERROR;
-		return IRQ_WAKE_THREAD;
-	}
-
-	if ((status & TEGRA_CEC_INT_STAT_TX_ARBITRATION_FAILED) ||
-		   (status & TEGRA_CEC_INT_STAT_TX_BUS_ANOMALY_DETECTED)) {
-		tegra_cec_error_recovery(cec);
-		cec_write(cec, TEGRA_CEC_INT_MASK,
-			  mask & ~TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY);
-
-		cec->tx_done = true;
-		if (status & TEGRA_CEC_INT_STAT_TX_BUS_ANOMALY_DETECTED)
-			cec->tx_status = CEC_TX_STATUS_LOW_DRIVE;
-		else
-			cec->tx_status = CEC_TX_STATUS_ARB_LOST;
-		return IRQ_WAKE_THREAD;
-	}
-
-	if (status & TEGRA_CEC_INT_STAT_TX_FRAME_TRANSMITTED) {
-		cec_write(cec, TEGRA_CEC_INT_STAT,
-			  TEGRA_CEC_INT_STAT_TX_FRAME_TRANSMITTED);
-
-		if (status & TEGRA_CEC_INT_STAT_TX_FRAME_OR_BLOCK_NAKD) {
-			tegra_cec_error_recovery(cec);
-
-			cec->tx_done = true;
-			cec->tx_status = CEC_TX_STATUS_NACK;
-		} else {
-			cec->tx_done = true;
-			cec->tx_status = CEC_TX_STATUS_OK;
-		}
-		return IRQ_WAKE_THREAD;
-	}
-
-	if (status & TEGRA_CEC_INT_STAT_TX_FRAME_OR_BLOCK_NAKD)
-		dev_warn(dev, "TX NAKed on the fly!\n");
-
-	if (status & TEGRA_CEC_INT_STAT_TX_REGISTER_EMPTY) {
-		if (cec->tx_buf_cur == cec->tx_buf_cnt) {
-			cec_write(cec, TEGRA_CEC_INT_MASK,
-				  mask & ~TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY);
-		} else {
-			cec_write(cec, TEGRA_CEC_TX_REGISTER,
-				  cec->tx_buf[cec->tx_buf_cur++]);
-			cec_write(cec, TEGRA_CEC_INT_STAT,
-				  TEGRA_CEC_INT_STAT_TX_REGISTER_EMPTY);
-		}
-	}
-
-	if (status & TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED) {
-		cec_write(cec, TEGRA_CEC_INT_STAT,
-			  TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED);
-		cec->rx_done = false;
-		cec->rx_buf_cnt = 0;
-	}
-	if (status & TEGRA_CEC_INT_STAT_RX_REGISTER_FULL) {
-		u32 v;
-
-		cec_write(cec, TEGRA_CEC_INT_STAT,
-			  TEGRA_CEC_INT_STAT_RX_REGISTER_FULL);
-		v = cec_read(cec, TEGRA_CEC_RX_REGISTER);
-		if (cec->rx_buf_cnt < CEC_MAX_MSG_SIZE)
-			cec->rx_buf[cec->rx_buf_cnt++] = v & 0xff;
-		if (v & TEGRA_CEC_RX_REGISTER_EOM) {
-			cec->rx_done = true;
-			return IRQ_WAKE_THREAD;
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int tegra_cec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct tegra_cec *cec = adap->priv;
-
-	cec->rx_buf_cnt = 0;
-	cec->tx_buf_cnt = 0;
-	cec->tx_buf_cur = 0;
-
-	cec_write(cec, TEGRA_CEC_HW_CONTROL, 0);
-	cec_write(cec, TEGRA_CEC_INT_MASK, 0);
-	cec_write(cec, TEGRA_CEC_INT_STAT, 0xffffffff);
-	cec_write(cec, TEGRA_CEC_SW_CONTROL, 0);
-
-	if (!enable)
-		return 0;
-
-	cec_write(cec, TEGRA_CEC_INPUT_FILTER, (1U << 31) | 0x20);
-
-	cec_write(cec, TEGRA_CEC_RX_TIMING_0,
-		  (0x7a << TEGRA_CEC_RX_TIM0_START_BIT_MAX_LO_TIME_SHIFT) |
-		  (0x6d << TEGRA_CEC_RX_TIM0_START_BIT_MIN_LO_TIME_SHIFT) |
-		  (0x93 << TEGRA_CEC_RX_TIM0_START_BIT_MAX_DURATION_SHIFT) |
-		  (0x86 << TEGRA_CEC_RX_TIM0_START_BIT_MIN_DURATION_SHIFT));
-
-	cec_write(cec, TEGRA_CEC_RX_TIMING_1,
-		  (0x35 << TEGRA_CEC_RX_TIM1_DATA_BIT_MAX_LO_TIME_SHIFT) |
-		  (0x21 << TEGRA_CEC_RX_TIM1_DATA_BIT_SAMPLE_TIME_SHIFT) |
-		  (0x56 << TEGRA_CEC_RX_TIM1_DATA_BIT_MAX_DURATION_SHIFT) |
-		  (0x40 << TEGRA_CEC_RX_TIM1_DATA_BIT_MIN_DURATION_SHIFT));
-
-	cec_write(cec, TEGRA_CEC_RX_TIMING_2,
-		  (0x50 << TEGRA_CEC_RX_TIM2_END_OF_BLOCK_TIME_SHIFT));
-
-	cec_write(cec, TEGRA_CEC_TX_TIMING_0,
-		  (0x74 << TEGRA_CEC_TX_TIM0_START_BIT_LO_TIME_SHIFT) |
-		  (0x8d << TEGRA_CEC_TX_TIM0_START_BIT_DURATION_SHIFT) |
-		  (0x08 << TEGRA_CEC_TX_TIM0_BUS_XITION_TIME_SHIFT) |
-		  (0x71 << TEGRA_CEC_TX_TIM0_BUS_ERROR_LO_TIME_SHIFT));
-
-	cec_write(cec, TEGRA_CEC_TX_TIMING_1,
-		  (0x2f << TEGRA_CEC_TX_TIM1_LO_DATA_BIT_LO_TIME_SHIFT) |
-		  (0x13 << TEGRA_CEC_TX_TIM1_HI_DATA_BIT_LO_TIME_SHIFT) |
-		  (0x4b << TEGRA_CEC_TX_TIM1_DATA_BIT_DURATION_SHIFT) |
-		  (0x21 << TEGRA_CEC_TX_TIM1_ACK_NAK_BIT_SAMPLE_TIME_SHIFT));
-
-	cec_write(cec, TEGRA_CEC_TX_TIMING_2,
-		  (0x07 << TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_ADDITIONAL_FRAME_SHIFT) |
-		  (0x05 << TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_NEW_FRAME_SHIFT) |
-		  (0x03 << TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_RETRY_FRAME_SHIFT));
-
-	cec_write(cec, TEGRA_CEC_INT_MASK,
-		  TEGRA_CEC_INT_MASK_TX_REGISTER_UNDERRUN |
-		  TEGRA_CEC_INT_MASK_TX_FRAME_OR_BLOCK_NAKD |
-		  TEGRA_CEC_INT_MASK_TX_ARBITRATION_FAILED |
-		  TEGRA_CEC_INT_MASK_TX_BUS_ANOMALY_DETECTED |
-		  TEGRA_CEC_INT_MASK_TX_FRAME_TRANSMITTED |
-		  TEGRA_CEC_INT_MASK_RX_REGISTER_FULL |
-		  TEGRA_CEC_INT_MASK_RX_START_BIT_DETECTED);
-
-	cec_write(cec, TEGRA_CEC_HW_CONTROL, TEGRA_CEC_HWCTRL_TX_RX_MODE);
-	return 0;
-}
-
-static int tegra_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
-{
-	struct tegra_cec *cec = adap->priv;
-	u32 state = cec_read(cec, TEGRA_CEC_HW_CONTROL);
-
-	if (logical_addr == CEC_LOG_ADDR_INVALID)
-		state &= ~TEGRA_CEC_HWCTRL_RX_LADDR_MASK;
-	else
-		state |= TEGRA_CEC_HWCTRL_RX_LADDR((1 << logical_addr));
-
-	cec_write(cec, TEGRA_CEC_HW_CONTROL, state);
-	return 0;
-}
-
-static int tegra_cec_adap_monitor_all_enable(struct cec_adapter *adap,
-					     bool enable)
-{
-	struct tegra_cec *cec = adap->priv;
-	u32 reg = cec_read(cec, TEGRA_CEC_HW_CONTROL);
-
-	if (enable)
-		reg |= TEGRA_CEC_HWCTRL_RX_SNOOP;
-	else
-		reg &= ~TEGRA_CEC_HWCTRL_RX_SNOOP;
-	cec_write(cec, TEGRA_CEC_HW_CONTROL, reg);
-	return 0;
-}
-
-static int tegra_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
-				   u32 signal_free_time_ms, struct cec_msg *msg)
-{
-	bool retry_xfer = signal_free_time_ms == CEC_SIGNAL_FREE_TIME_RETRY;
-	struct tegra_cec *cec = adap->priv;
-	unsigned int i;
-	u32 mode = 0;
-	u32 mask;
-
-	if (cec_msg_is_broadcast(msg))
-		mode = TEGRA_CEC_TX_REG_BCAST;
-
-	cec->tx_buf_cur = 0;
-	cec->tx_buf_cnt = msg->len;
-
-	for (i = 0; i < msg->len; i++) {
-		cec->tx_buf[i] = mode | msg->msg[i];
-		if (i == 0)
-			cec->tx_buf[i] |= TEGRA_CEC_TX_REG_START_BIT;
-		if (i == msg->len - 1)
-			cec->tx_buf[i] |= TEGRA_CEC_TX_REG_EOM;
-		if (i == 0 && retry_xfer)
-			cec->tx_buf[i] |= TEGRA_CEC_TX_REG_RETRY;
-	}
-
-	mask = cec_read(cec, TEGRA_CEC_INT_MASK);
-	cec_write(cec, TEGRA_CEC_INT_MASK,
-		  mask | TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY);
-
-	return 0;
-}
-
-static const struct cec_adap_ops tegra_cec_ops = {
-	.adap_enable = tegra_cec_adap_enable,
-	.adap_log_addr = tegra_cec_adap_log_addr,
-	.adap_transmit = tegra_cec_adap_transmit,
-	.adap_monitor_all_enable = tegra_cec_adap_monitor_all_enable,
-};
-
-static int tegra_cec_probe(struct platform_device *pdev)
-{
-	struct device *hdmi_dev;
-	struct tegra_cec *cec;
-	struct resource *res;
-	int ret = 0;
-
-	hdmi_dev = cec_notifier_parse_hdmi_phandle(&pdev->dev);
-
-	if (IS_ERR(hdmi_dev))
-		return PTR_ERR(hdmi_dev);
-
-	cec = devm_kzalloc(&pdev->dev, sizeof(struct tegra_cec), GFP_KERNEL);
-
-	if (!cec)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	if (!res) {
-		dev_err(&pdev->dev,
-			"Unable to allocate resources for device\n");
-		return -EBUSY;
-	}
-
-	if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
-		pdev->name)) {
-		dev_err(&pdev->dev,
-			"Unable to request mem region for device\n");
-		return -EBUSY;
-	}
-
-	cec->tegra_cec_irq = platform_get_irq(pdev, 0);
-
-	if (cec->tegra_cec_irq <= 0)
-		return -EBUSY;
-
-	cec->cec_base = devm_ioremap(&pdev->dev, res->start,
-					     resource_size(res));
-
-	if (!cec->cec_base) {
-		dev_err(&pdev->dev, "Unable to grab IOs for device\n");
-		return -EBUSY;
-	}
-
-	cec->clk = devm_clk_get(&pdev->dev, "cec");
-
-	if (IS_ERR_OR_NULL(cec->clk)) {
-		dev_err(&pdev->dev, "Can't get clock for CEC\n");
-		return -ENOENT;
-	}
-
-	clk_prepare_enable(cec->clk);
-
-	/* set context info. */
-	cec->dev = &pdev->dev;
-
-	platform_set_drvdata(pdev, cec);
-
-	ret = devm_request_threaded_irq(&pdev->dev, cec->tegra_cec_irq,
-		tegra_cec_irq_handler, tegra_cec_irq_thread_handler,
-		0, "cec_irq", &pdev->dev);
-
-	if (ret) {
-		dev_err(&pdev->dev,
-			"Unable to request interrupt for device\n");
-		goto err_clk;
-	}
-
-	cec->adap = cec_allocate_adapter(&tegra_cec_ops, cec, TEGRA_CEC_NAME,
-			CEC_CAP_DEFAULTS | CEC_CAP_MONITOR_ALL |
-			CEC_CAP_CONNECTOR_INFO,
-			CEC_MAX_LOG_ADDRS);
-	if (IS_ERR(cec->adap)) {
-		ret = -ENOMEM;
-		dev_err(&pdev->dev, "Couldn't create cec adapter\n");
-		goto err_clk;
-	}
-
-	cec->notifier = cec_notifier_cec_adap_register(hdmi_dev, NULL,
-						       cec->adap);
-	if (!cec->notifier) {
-		ret = -ENOMEM;
-		goto err_adapter;
-	}
-
-	ret = cec_register_adapter(cec->adap, &pdev->dev);
-	if (ret) {
-		dev_err(&pdev->dev, "Couldn't register device\n");
-		goto err_notifier;
-	}
-
-	return 0;
-
-err_notifier:
-	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
-err_adapter:
-	cec_delete_adapter(cec->adap);
-err_clk:
-	clk_disable_unprepare(cec->clk);
-	return ret;
-}
-
-static int tegra_cec_remove(struct platform_device *pdev)
-{
-	struct tegra_cec *cec = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(cec->clk);
-
-	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
-	cec_unregister_adapter(cec->adap);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int tegra_cec_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct tegra_cec *cec = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(cec->clk);
-
-	dev_notice(&pdev->dev, "suspended\n");
-	return 0;
-}
-
-static int tegra_cec_resume(struct platform_device *pdev)
-{
-	struct tegra_cec *cec = platform_get_drvdata(pdev);
-
-	dev_notice(&pdev->dev, "Resuming\n");
-
-	clk_prepare_enable(cec->clk);
-
-	return 0;
-}
-#endif
-
-static const struct of_device_id tegra_cec_of_match[] = {
-	{ .compatible = "nvidia,tegra114-cec", },
-	{ .compatible = "nvidia,tegra124-cec", },
-	{ .compatible = "nvidia,tegra210-cec", },
-	{},
-};
-
-static struct platform_driver tegra_cec_driver = {
-	.driver = {
-		.name = TEGRA_CEC_NAME,
-		.of_match_table = of_match_ptr(tegra_cec_of_match),
-	},
-	.probe = tegra_cec_probe,
-	.remove = tegra_cec_remove,
-
-#ifdef CONFIG_PM
-	.suspend = tegra_cec_suspend,
-	.resume = tegra_cec_resume,
-#endif
-};
-
-module_platform_driver(tegra_cec_driver);
-
-MODULE_DESCRIPTION("Tegra HDMI CEC driver");
-MODULE_AUTHOR("NVIDIA CORPORATION");
-MODULE_AUTHOR("Cisco Systems, Inc. and/or its affiliates");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/platform/tegra-cec/tegra_cec.h b/drivers/media/platform/tegra-cec/tegra_cec.h
deleted file mode 100644
index 8c370be38e1e..000000000000
--- a/drivers/media/platform/tegra-cec/tegra_cec.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Tegra CEC register definitions
- *
- * The original 3.10 CEC driver using a custom API:
- *
- * Copyright (c) 2012-2015, NVIDIA CORPORATION.  All rights reserved.
- *
- * Conversion to the CEC framework and to the mainline kernel:
- *
- * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef TEGRA_CEC_H
-#define TEGRA_CEC_H
-
-/* CEC registers */
-#define TEGRA_CEC_SW_CONTROL	0x000
-#define TEGRA_CEC_HW_CONTROL	0x004
-#define TEGRA_CEC_INPUT_FILTER	0x008
-#define TEGRA_CEC_TX_REGISTER	0x010
-#define TEGRA_CEC_RX_REGISTER	0x014
-#define TEGRA_CEC_RX_TIMING_0	0x018
-#define TEGRA_CEC_RX_TIMING_1	0x01c
-#define TEGRA_CEC_RX_TIMING_2	0x020
-#define TEGRA_CEC_TX_TIMING_0	0x024
-#define TEGRA_CEC_TX_TIMING_1	0x028
-#define TEGRA_CEC_TX_TIMING_2	0x02c
-#define TEGRA_CEC_INT_STAT	0x030
-#define TEGRA_CEC_INT_MASK	0x034
-#define TEGRA_CEC_HW_DEBUG_RX	0x038
-#define TEGRA_CEC_HW_DEBUG_TX	0x03c
-
-#define TEGRA_CEC_HWCTRL_RX_LADDR_MASK				0x7fff
-#define TEGRA_CEC_HWCTRL_RX_LADDR(x)	\
-	((x) & TEGRA_CEC_HWCTRL_RX_LADDR_MASK)
-#define TEGRA_CEC_HWCTRL_RX_SNOOP				BIT(15)
-#define TEGRA_CEC_HWCTRL_RX_NAK_MODE				BIT(16)
-#define TEGRA_CEC_HWCTRL_TX_NAK_MODE				BIT(24)
-#define TEGRA_CEC_HWCTRL_FAST_SIM_MODE				BIT(30)
-#define TEGRA_CEC_HWCTRL_TX_RX_MODE				BIT(31)
-
-#define TEGRA_CEC_INPUT_FILTER_MODE				BIT(31)
-#define TEGRA_CEC_INPUT_FILTER_FIFO_LENGTH_SHIFT		0
-
-#define TEGRA_CEC_TX_REG_DATA_SHIFT				0
-#define TEGRA_CEC_TX_REG_EOM					BIT(8)
-#define TEGRA_CEC_TX_REG_BCAST					BIT(12)
-#define TEGRA_CEC_TX_REG_START_BIT				BIT(16)
-#define TEGRA_CEC_TX_REG_RETRY					BIT(17)
-
-#define TEGRA_CEC_RX_REGISTER_SHIFT				0
-#define TEGRA_CEC_RX_REGISTER_EOM				BIT(8)
-#define TEGRA_CEC_RX_REGISTER_ACK				BIT(9)
-
-#define TEGRA_CEC_RX_TIM0_START_BIT_MAX_LO_TIME_SHIFT		0
-#define TEGRA_CEC_RX_TIM0_START_BIT_MIN_LO_TIME_SHIFT		8
-#define TEGRA_CEC_RX_TIM0_START_BIT_MAX_DURATION_SHIFT		16
-#define TEGRA_CEC_RX_TIM0_START_BIT_MIN_DURATION_SHIFT		24
-
-#define TEGRA_CEC_RX_TIM1_DATA_BIT_MAX_LO_TIME_SHIFT		0
-#define TEGRA_CEC_RX_TIM1_DATA_BIT_SAMPLE_TIME_SHIFT		8
-#define TEGRA_CEC_RX_TIM1_DATA_BIT_MAX_DURATION_SHIFT		16
-#define TEGRA_CEC_RX_TIM1_DATA_BIT_MIN_DURATION_SHIFT		24
-
-#define TEGRA_CEC_RX_TIM2_END_OF_BLOCK_TIME_SHIFT		0
-
-#define TEGRA_CEC_TX_TIM0_START_BIT_LO_TIME_SHIFT		0
-#define TEGRA_CEC_TX_TIM0_START_BIT_DURATION_SHIFT		8
-#define TEGRA_CEC_TX_TIM0_BUS_XITION_TIME_SHIFT			16
-#define TEGRA_CEC_TX_TIM0_BUS_ERROR_LO_TIME_SHIFT		24
-
-#define TEGRA_CEC_TX_TIM1_LO_DATA_BIT_LO_TIME_SHIFT		0
-#define TEGRA_CEC_TX_TIM1_HI_DATA_BIT_LO_TIME_SHIFT		8
-#define TEGRA_CEC_TX_TIM1_DATA_BIT_DURATION_SHIFT		16
-#define TEGRA_CEC_TX_TIM1_ACK_NAK_BIT_SAMPLE_TIME_SHIFT		24
-
-#define TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_ADDITIONAL_FRAME_SHIFT	0
-#define TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_NEW_FRAME_SHIFT		4
-#define TEGRA_CEC_TX_TIM2_BUS_IDLE_TIME_RETRY_FRAME_SHIFT	8
-
-#define TEGRA_CEC_INT_STAT_TX_REGISTER_EMPTY			BIT(0)
-#define TEGRA_CEC_INT_STAT_TX_REGISTER_UNDERRUN			BIT(1)
-#define TEGRA_CEC_INT_STAT_TX_FRAME_OR_BLOCK_NAKD		BIT(2)
-#define TEGRA_CEC_INT_STAT_TX_ARBITRATION_FAILED		BIT(3)
-#define TEGRA_CEC_INT_STAT_TX_BUS_ANOMALY_DETECTED		BIT(4)
-#define TEGRA_CEC_INT_STAT_TX_FRAME_TRANSMITTED			BIT(5)
-#define TEGRA_CEC_INT_STAT_RX_REGISTER_FULL			BIT(8)
-#define TEGRA_CEC_INT_STAT_RX_REGISTER_OVERRUN			BIT(9)
-#define TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED		BIT(10)
-#define TEGRA_CEC_INT_STAT_RX_BUS_ANOMALY_DETECTED		BIT(11)
-#define TEGRA_CEC_INT_STAT_RX_BUS_ERROR_DETECTED		BIT(12)
-#define TEGRA_CEC_INT_STAT_FILTERED_RX_DATA_PIN_TRANSITION_H2L	BIT(13)
-#define TEGRA_CEC_INT_STAT_FILTERED_RX_DATA_PIN_TRANSITION_L2H	BIT(14)
-
-#define TEGRA_CEC_INT_MASK_TX_REGISTER_EMPTY			BIT(0)
-#define TEGRA_CEC_INT_MASK_TX_REGISTER_UNDERRUN			BIT(1)
-#define TEGRA_CEC_INT_MASK_TX_FRAME_OR_BLOCK_NAKD		BIT(2)
-#define TEGRA_CEC_INT_MASK_TX_ARBITRATION_FAILED		BIT(3)
-#define TEGRA_CEC_INT_MASK_TX_BUS_ANOMALY_DETECTED		BIT(4)
-#define TEGRA_CEC_INT_MASK_TX_FRAME_TRANSMITTED			BIT(5)
-#define TEGRA_CEC_INT_MASK_RX_REGISTER_FULL			BIT(8)
-#define TEGRA_CEC_INT_MASK_RX_REGISTER_OVERRUN			BIT(9)
-#define TEGRA_CEC_INT_MASK_RX_START_BIT_DETECTED		BIT(10)
-#define TEGRA_CEC_INT_MASK_RX_BUS_ANOMALY_DETECTED		BIT(11)
-#define TEGRA_CEC_INT_MASK_RX_BUS_ERROR_DETECTED		BIT(12)
-#define TEGRA_CEC_INT_MASK_FILTERED_RX_DATA_PIN_TRANSITION_H2L	BIT(13)
-#define TEGRA_CEC_INT_MASK_FILTERED_RX_DATA_PIN_TRANSITION_L2H	BIT(14)
-
-#define TEGRA_CEC_HW_DEBUG_TX_DURATION_COUNT_SHIFT		0
-#define TEGRA_CEC_HW_DEBUG_TX_TXBIT_COUNT_SHIFT			17
-#define TEGRA_CEC_HW_DEBUG_TX_STATE_SHIFT			21
-#define TEGRA_CEC_HW_DEBUG_TX_FORCELOOUT			BIT(25)
-#define TEGRA_CEC_HW_DEBUG_TX_TXDATABIT_SAMPLE_TIMER		BIT(26)
-
-#endif /* TEGRA_CEC_H */
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 6c8f3702eac0..49204872e711 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -6,6 +6,7 @@
  * Benoit Parrot, <bparrot@ti.com>
  */
 
+#include <linux/clk.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/ioctl.h>
@@ -340,6 +341,7 @@ static const struct cal_data am654_cal_data = {
  * all instances.
  */
 struct cal_dev {
+	struct clk		*fclk;
 	int			irq;
 	void __iomem		*base;
 	struct resource		*res;
@@ -412,6 +414,8 @@ struct cal_ctx {
 	struct cal_buffer	*cur_frm;
 	/* Pointer pointing to next v4l2_buffer */
 	struct cal_buffer	*next_frm;
+
+	bool dma_act;
 };
 
 static const struct cal_fmt *find_format_by_pix(struct cal_ctx *ctx,
@@ -643,36 +647,12 @@ static void i913_errata(struct cal_dev *dev, unsigned int port)
 {
 	u32 reg10 = reg_read(dev->cc[port], CAL_CSI2_PHY_REG10);
 
-	set_field(&reg10, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE,
-		  CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK);
+	set_field(&reg10, 1, CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK);
 
 	cal_dbg(1, dev, "CSI2_%d_REG10 = 0x%08x\n", port, reg10);
 	reg_write(dev->cc[port], CAL_CSI2_PHY_REG10, reg10);
 }
 
-static int cal_runtime_get(struct cal_dev *dev)
-{
-	int r;
-
-	r = pm_runtime_get_sync(&dev->pdev->dev);
-
-	if (dev->flags & DRA72_CAL_PRE_ES2_LDO_DISABLE) {
-		/*
-		 * Apply errata on both port eveytime we (re-)enable
-		 * the clock
-		 */
-		i913_errata(dev, 0);
-		i913_errata(dev, 1);
-	}
-
-	return r;
-}
-
-static inline void cal_runtime_put(struct cal_dev *dev)
-{
-	pm_runtime_put_sync(&dev->pdev->dev);
-}
-
 static void cal_quickdump_regs(struct cal_dev *dev)
 {
 	cal_info(dev, "CAL Registers @ 0x%pa:\n", &dev->res->start);
@@ -704,16 +684,31 @@ static void cal_quickdump_regs(struct cal_dev *dev)
  */
 static void enable_irqs(struct cal_ctx *ctx)
 {
+	u32 val;
+
+	const u32 cio_err_mask =
+		CAL_CSI2_COMPLEXIO_IRQ_LANE_ERRORS_MASK |
+		CAL_CSI2_COMPLEXIO_IRQ_FIFO_OVR_MASK |
+		CAL_CSI2_COMPLEXIO_IRQ_SHORT_PACKET_MASK |
+		CAL_CSI2_COMPLEXIO_IRQ_ECC_NO_CORRECTION_MASK;
+
+	/* Enable CIO error irqs */
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_SET(1),
+		  CAL_HL_IRQ_CIO_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_IRQENABLE(ctx->csi2_port),
+		  cio_err_mask);
+
+	/* Always enable OCPO error */
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_SET(1), CAL_HL_IRQ_OCPO_ERR_MASK);
+
 	/* Enable IRQ_WDMA_END 0/1 */
-	reg_write_field(ctx->dev,
-			CAL_HL_IRQENABLE_SET(2),
-			CAL_HL_IRQ_ENABLE,
-			CAL_HL_IRQ_MASK(ctx->csi2_port));
+	val = 0;
+	set_field(&val, 1, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_SET(2), val);
 	/* Enable IRQ_WDMA_START 0/1 */
-	reg_write_field(ctx->dev,
-			CAL_HL_IRQENABLE_SET(3),
-			CAL_HL_IRQ_ENABLE,
-			CAL_HL_IRQ_MASK(ctx->csi2_port));
+	val = 0;
+	set_field(&val, 1, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_SET(3), val);
 	/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
 	reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0xFF000000);
 }
@@ -722,24 +717,59 @@ static void disable_irqs(struct cal_ctx *ctx)
 {
 	u32 val;
 
+	/* Disable CIO error irqs */
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(1),
+		  CAL_HL_IRQ_CIO_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_IRQENABLE(ctx->csi2_port),
+		  0);
+
 	/* Disable IRQ_WDMA_END 0/1 */
 	val = 0;
-	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	set_field(&val, 1, CAL_HL_IRQ_MASK(ctx->csi2_port));
 	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(2), val);
 	/* Disable IRQ_WDMA_START 0/1 */
 	val = 0;
-	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	set_field(&val, 1, CAL_HL_IRQ_MASK(ctx->csi2_port));
 	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(3), val);
 	/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
 	reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
 }
 
+static void csi2_cio_power(struct cal_ctx *ctx, bool enable)
+{
+	u32 target_state;
+	unsigned int i;
+
+	target_state = enable ? CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON :
+		       CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF;
+
+	reg_write_field(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+			target_state, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
+
+	for (i = 0; i < 10; i++) {
+		u32 current_state;
+
+		current_state = reg_read_field(ctx->dev,
+					       CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+					       CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK);
+
+		if (current_state == target_state)
+			break;
+
+		usleep_range(1000, 1100);
+	}
+
+	if (i == 10)
+		ctx_err(ctx, "Failed to power %s complexio\n",
+			enable ? "up" : "down");
+}
+
 static void csi2_phy_config(struct cal_ctx *ctx);
 
 static void csi2_phy_init(struct cal_ctx *ctx)
 {
-	int i;
 	u32 val;
+	u32 sscounter;
 
 	/* Steps
 	 *  1. Configure D-PHY mode and enable required lanes
@@ -762,66 +792,90 @@ static void csi2_phy_init(struct cal_ctx *ctx)
 	camerarx_phy_enable(ctx);
 
 	/* 2. Reset complex IO - Do not wait for reset completion */
-	val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
-	set_field(&val, CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
-		  CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
-	reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
+	reg_write_field(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+			CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
+			CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
 	ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x De-assert Complex IO Reset\n",
 		ctx->csi2_port,
 		reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port)));
 
-	/* Dummy read to allow SCP to complete */
-	val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
+	/* Dummy read to allow SCP reset to complete */
+	reg_read(ctx->cc, CAL_CSI2_PHY_REG0);
 
 	/* 3.A. Program Phy Timing Parameters */
 	csi2_phy_config(ctx);
 
 	/* 3.B. Program Stop States */
+	/*
+	 * The stop-state-counter is based on fclk cycles, and we always use
+	 * the x16 and x4 settings, so stop-state-timeout =
+	 * fclk-cycle * 16 * 4 * counter.
+	 *
+	 * Stop-state-timeout must be more than 100us as per CSI2 spec, so we
+	 * calculate a timeout that's 100us (rounding up).
+	 */
+	sscounter = DIV_ROUND_UP(clk_get_rate(ctx->dev->fclk), 10000 *  16 * 4);
+
 	val = reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port));
-	set_field(&val, CAL_GEN_ENABLE,
-		  CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
-	set_field(&val, CAL_GEN_DISABLE,
-		  CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
-	set_field(&val, 407, CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK);
+	set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
+	set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
+	set_field(&val, sscounter, CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK);
 	reg_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val);
 	ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x Stop States\n",
 		ctx->csi2_port,
 		reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port)));
 
 	/* 4. Force FORCERXMODE */
-	val = reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port));
-	set_field(&val, CAL_GEN_ENABLE,
-		  CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
-	reg_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val);
+	reg_write_field(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port),
+			1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
 	ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x Force RXMODE\n",
 		ctx->csi2_port,
 		reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port)));
 
 	/* E. Power up the PHY using the complex IO */
-	val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
-	set_field(&val, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON,
-		  CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
-	reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
+	csi2_cio_power(ctx, true);
+}
 
-	/* F. Wait for power up completion */
-	for (i = 0; i < 10; i++) {
+static void csi2_wait_complexio_reset(struct cal_ctx *ctx)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(750);
+	while (time_before(jiffies, timeout)) {
 		if (reg_read_field(ctx->dev,
 				   CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
-				   CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK) ==
-		    CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_ON)
+				   CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
+		    CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
 			break;
-		usleep_range(1000, 1100);
+		usleep_range(500, 5000);
 	}
-	ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Powered UP %s\n",
-		ctx->csi2_port,
-		reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port)),
-		(i >= 10) ? "(timeout)" : "");
+
+	if (reg_read_field(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+			   CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) !=
+			   CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
+		ctx_err(ctx, "Timeout waiting for Complex IO reset done\n");
 }
 
-static void csi2_wait_for_phy(struct cal_ctx *ctx)
+static void csi2_wait_stop_state(struct cal_ctx *ctx)
 {
-	int i;
+	unsigned long timeout;
 
+	timeout = jiffies + msecs_to_jiffies(750);
+	while (time_before(jiffies, timeout)) {
+		if (reg_read_field(ctx->dev,
+				   CAL_CSI2_TIMING(ctx->csi2_port),
+				   CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) == 0)
+			break;
+		usleep_range(500, 5000);
+	}
+
+	if (reg_read_field(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port),
+			   CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) != 0)
+		ctx_err(ctx, "Timeout waiting for stop state\n");
+}
+
+static void csi2_wait_for_phy(struct cal_ctx *ctx)
+{
 	/* Steps
 	 *  2. Wait for completion of reset
 	 *          Note if the external sensor is not sending byte clock,
@@ -832,32 +886,10 @@ static void csi2_wait_for_phy(struct cal_ctx *ctx)
 	 */
 
 	/* 2. Wait for reset completion */
-	for (i = 0; i < 250; i++) {
-		if (reg_read_field(ctx->dev,
-				   CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
-				   CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
-		    CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
-			break;
-		usleep_range(1000, 1100);
-	}
-	ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Complex IO Reset Done (%d) %s\n",
-		ctx->csi2_port,
-		reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port)), i,
-		(i >= 250) ? "(timeout)" : "");
+	csi2_wait_complexio_reset(ctx);
 
 	/* 4. G. Wait for all enabled lane to reach stop state */
-	for (i = 0; i < 10; i++) {
-		if (reg_read_field(ctx->dev,
-				   CAL_CSI2_TIMING(ctx->csi2_port),
-				   CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) ==
-		    CAL_GEN_DISABLE)
-			break;
-		usleep_range(1000, 1100);
-	}
-	ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x Stop State Reached %s\n",
-		ctx->csi2_port,
-		reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port)),
-		(i >= 10) ? "(timeout)" : "");
+	csi2_wait_stop_state(ctx);
 
 	ctx_dbg(1, ctx, "CSI2_%d_REG1 = 0x%08x (Bit(31,28) should be set!)\n",
 		(ctx->csi2_port - 1), reg_read(ctx->cc, CAL_CSI2_PHY_REG1));
@@ -866,33 +898,13 @@ static void csi2_wait_for_phy(struct cal_ctx *ctx)
 static void csi2_phy_deinit(struct cal_ctx *ctx)
 {
 	int i;
-	u32 val;
 
-	/* Power down the PHY using the complex IO */
-	val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
-	set_field(&val, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF,
-		  CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
-	reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
-
-	/* Wait for power down completion */
-	for (i = 0; i < 10; i++) {
-		if (reg_read_field(ctx->dev,
-				   CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
-				   CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK) ==
-		    CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_OFF)
-			break;
-		usleep_range(1000, 1100);
-	}
-	ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Powered Down %s\n",
-		ctx->csi2_port,
-		reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port)),
-		(i >= 10) ? "(timeout)" : "");
+	csi2_cio_power(ctx, false);
 
 	/* Assert Comple IO Reset */
-	val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
-	set_field(&val, CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL,
-		  CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
-	reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
+	reg_write_field(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+			CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL,
+			CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
 
 	/* Wait for power down completion */
 	for (i = 0; i < 10; i++) {
@@ -942,14 +954,15 @@ static void csi2_lane_config(struct cal_ctx *ctx)
 
 static void csi2_ppi_enable(struct cal_ctx *ctx)
 {
+	reg_write(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port), BIT(3));
 	reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port),
-			CAL_GEN_ENABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
+			1, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
 }
 
 static void csi2_ppi_disable(struct cal_ctx *ctx)
 {
 	reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port),
-			CAL_GEN_DISABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
+			0, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
 }
 
 static void csi2_ctx_config(struct cal_ctx *ctx)
@@ -969,8 +982,7 @@ static void csi2_ctx_config(struct cal_ctx *ctx)
 	set_field(&val, 0x1, CAL_CSI2_CTX_DT_MASK);
 	/* Virtual Channel from the CSI2 sensor usually 0! */
 	set_field(&val, ctx->virtual_channel, CAL_CSI2_CTX_VC_MASK);
-	/* NUM_LINES_PER_FRAME => 0 means auto detect */
-	set_field(&val, 0, CAL_CSI2_CTX_LINES_MASK);
+	set_field(&val, ctx->v_fmt.fmt.pix.height, CAL_CSI2_CTX_LINES_MASK);
 	set_field(&val, CAL_CSI2_CTX_ATT_PIX, CAL_CSI2_CTX_ATT_MASK);
 	set_field(&val, CAL_CSI2_CTX_PACK_MODE_LINE,
 		  CAL_CSI2_CTX_PACK_MODE_MASK);
@@ -1024,7 +1036,7 @@ static void pix_proc_config(struct cal_ctx *ctx)
 	set_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK);
 	set_field(&val, pack, CAL_PIX_PROC_PACK_MASK);
 	set_field(&val, ctx->csi2_port, CAL_PIX_PROC_CPORT_MASK);
-	set_field(&val, CAL_GEN_ENABLE, CAL_PIX_PROC_EN_MASK);
+	set_field(&val, 1, CAL_PIX_PROC_EN_MASK);
 	reg_write(ctx->dev, CAL_PIX_PROC(ctx->csi2_port), val);
 	ctx_dbg(3, ctx, "CAL_PIX_PROC(%d) = 0x%08x\n", ctx->csi2_port,
 		reg_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port)));
@@ -1044,7 +1056,7 @@ static void cal_wr_dma_config(struct cal_ctx *ctx,
 		  CAL_WR_DMA_CTRL_MODE_MASK);
 	set_field(&val, CAL_WR_DMA_CTRL_PATTERN_LINEAR,
 		  CAL_WR_DMA_CTRL_PATTERN_MASK);
-	set_field(&val, CAL_GEN_ENABLE, CAL_WR_DMA_CTRL_STALL_RD_MASK);
+	set_field(&val, 1, CAL_WR_DMA_CTRL_STALL_RD_MASK);
 	reg_write(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port), val);
 	ctx_dbg(3, ctx, "CAL_WR_DMA_CTRL(%d) = 0x%08x\n", ctx->csi2_port,
 		reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port)));
@@ -1192,57 +1204,74 @@ static irqreturn_t cal_irq(int irq_cal, void *data)
 	struct cal_dev *dev = (struct cal_dev *)data;
 	struct cal_ctx *ctx;
 	struct cal_dmaqueue *dma_q;
-	u32 irqst2, irqst3;
+	u32 irqst1, irqst2, irqst3;
+
+	irqst1 = reg_read(dev, CAL_HL_IRQSTATUS(1));
+	if (irqst1) {
+		int i;
+
+		reg_write(dev, CAL_HL_IRQSTATUS(1), irqst1);
+
+		if (irqst1 & CAL_HL_IRQ_OCPO_ERR_MASK)
+			dev_err_ratelimited(&dev->pdev->dev, "OCPO ERROR\n");
+
+		for (i = 1; i <= 2; ++i) {
+			if (irqst1 & CAL_HL_IRQ_CIO_MASK(i)) {
+				u32 cio_stat = reg_read(dev,
+							CAL_CSI2_COMPLEXIO_IRQSTATUS(i));
+
+				dev_err_ratelimited(&dev->pdev->dev,
+						    "CIO%d error: %#08x\n", i, cio_stat);
+
+				reg_write(dev, CAL_CSI2_COMPLEXIO_IRQSTATUS(i),
+					  cio_stat);
+			}
+		}
+	}
 
 	/* Check which DMA just finished */
 	irqst2 = reg_read(dev, CAL_HL_IRQSTATUS(2));
 	if (irqst2) {
+		int i;
+
 		/* Clear Interrupt status */
 		reg_write(dev, CAL_HL_IRQSTATUS(2), irqst2);
 
-		/* Need to check both port */
-		if (isportirqset(irqst2, 1)) {
-			ctx = dev->ctx[0];
+		for (i = 1; i <= 2; ++i) {
+			if (isportirqset(irqst2, i)) {
+				ctx = dev->ctx[i - 1];
 
-			if (ctx->cur_frm != ctx->next_frm)
-				cal_process_buffer_complete(ctx);
-		}
+				spin_lock(&ctx->slock);
+				ctx->dma_act = false;
 
-		if (isportirqset(irqst2, 2)) {
-			ctx = dev->ctx[1];
+				if (ctx->cur_frm != ctx->next_frm)
+					cal_process_buffer_complete(ctx);
 
-			if (ctx->cur_frm != ctx->next_frm)
-				cal_process_buffer_complete(ctx);
+				spin_unlock(&ctx->slock);
+			}
 		}
 	}
 
 	/* Check which DMA just started */
 	irqst3 = reg_read(dev, CAL_HL_IRQSTATUS(3));
 	if (irqst3) {
+		int i;
+
 		/* Clear Interrupt status */
 		reg_write(dev, CAL_HL_IRQSTATUS(3), irqst3);
 
-		/* Need to check both port */
-		if (isportirqset(irqst3, 1)) {
-			ctx = dev->ctx[0];
-			dma_q = &ctx->vidq;
-
-			spin_lock(&ctx->slock);
-			if (!list_empty(&dma_q->active) &&
-			    ctx->cur_frm == ctx->next_frm)
-				cal_schedule_next_buffer(ctx);
-			spin_unlock(&ctx->slock);
-		}
-
-		if (isportirqset(irqst3, 2)) {
-			ctx = dev->ctx[1];
-			dma_q = &ctx->vidq;
-
-			spin_lock(&ctx->slock);
-			if (!list_empty(&dma_q->active) &&
-			    ctx->cur_frm == ctx->next_frm)
-				cal_schedule_next_buffer(ctx);
-			spin_unlock(&ctx->slock);
+		for (i = 1; i <= 2; ++i) {
+			if (isportirqset(irqst3, i)) {
+				ctx = dev->ctx[i - 1];
+				dma_q = &ctx->vidq;
+
+				spin_lock(&ctx->slock);
+				ctx->dma_act = true;
+				if (!list_empty(&dma_q->active) &&
+				    ctx->cur_frm == ctx->next_frm)
+					cal_schedule_next_buffer(ctx);
+				spin_unlock(&ctx->slock);
+			}
 		}
 	}
 
@@ -1665,7 +1694,7 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 		goto err;
 	}
 
-	cal_runtime_get(ctx->dev);
+	pm_runtime_get_sync(&ctx->dev->pdev->dev);
 
 	csi2_ctx_config(ctx);
 	pix_proc_config(ctx);
@@ -1680,7 +1709,7 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 	if (ret) {
 		v4l2_subdev_call(ctx->sensor, core, s_power, 0);
 		ctx_err(ctx, "stream on failed in subdev\n");
-		cal_runtime_put(ctx->dev);
+		pm_runtime_put_sync(&ctx->dev->pdev->dev);
 		goto err;
 	}
 
@@ -1711,10 +1740,27 @@ static void cal_stop_streaming(struct vb2_queue *vq)
 	struct cal_ctx *ctx = vb2_get_drv_priv(vq);
 	struct cal_dmaqueue *dma_q = &ctx->vidq;
 	struct cal_buffer *buf, *tmp;
+	unsigned long timeout;
 	unsigned long flags;
 	int ret;
+	bool dma_act;
 
 	csi2_ppi_disable(ctx);
+
+	/* wait for stream and dma to finish */
+	dma_act = true;
+	timeout = jiffies + msecs_to_jiffies(500);
+	while (dma_act && time_before(jiffies, timeout)) {
+		msleep(50);
+
+		spin_lock_irqsave(&ctx->slock, flags);
+		dma_act = ctx->dma_act;
+		spin_unlock_irqrestore(&ctx->slock, flags);
+	}
+
+	if (dma_act)
+		ctx_err(ctx, "failed to disable dma cleanly\n");
+
 	disable_irqs(ctx);
 	csi2_phy_deinit(ctx);
 
@@ -1743,7 +1789,7 @@ static void cal_stop_streaming(struct vb2_queue *vq)
 	ctx->next_frm = NULL;
 	spin_unlock_irqrestore(&ctx->slock, flags);
 
-	cal_runtime_put(ctx->dev);
+	pm_runtime_put_sync(&ctx->dev->pdev->dev);
 }
 
 static const struct vb2_ops cal_video_qops = {
@@ -2223,6 +2269,12 @@ static int cal_probe(struct platform_device *pdev)
 	/* save pdev pointer */
 	dev->pdev = pdev;
 
+	dev->fclk = devm_clk_get(&pdev->dev, "fck");
+	if (IS_ERR(dev->fclk)) {
+		dev_err(&pdev->dev, "cannot get CAL fclk\n");
+		return PTR_ERR(dev->fclk);
+	}
+
 	syscon_camerrx = syscon_regmap_lookup_by_phandle(parent,
 							 "ti,camerrx-control");
 	ret = of_property_read_u32_index(parent, "ti,camerrx-control", 1,
@@ -2296,20 +2348,24 @@ static int cal_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
+
 	pm_runtime_enable(&pdev->dev);
 
-	ret = cal_runtime_get(dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret)
 		goto runtime_disable;
 
 	/* Just check we can actually access the module */
 	cal_get_hwinfo(dev);
 
-	cal_runtime_put(dev);
+	pm_runtime_put_sync(&pdev->dev);
 
 	return 0;
 
 runtime_disable:
+	vb2_dma_contig_clear_max_seg_size(&pdev->dev);
+
 	pm_runtime_disable(&pdev->dev);
 	for (i = 0; i < CAL_NUM_CONTEXT; i++) {
 		ctx = dev->ctx[i];
@@ -2333,7 +2389,7 @@ static int cal_remove(struct platform_device *pdev)
 
 	cal_dbg(1, dev, "Removing %s\n", CAL_MODULE_NAME);
 
-	cal_runtime_get(dev);
+	pm_runtime_get_sync(&pdev->dev);
 
 	for (i = 0; i < CAL_NUM_CONTEXT; i++) {
 		ctx = dev->ctx[i];
@@ -2349,9 +2405,11 @@ static int cal_remove(struct platform_device *pdev)
 		}
 	}
 
-	cal_runtime_put(dev);
+	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
+	vb2_dma_contig_clear_max_seg_size(&pdev->dev);
+
 	return 0;
 }
 
@@ -2378,11 +2436,32 @@ static const struct of_device_id cal_of_match[] = {
 MODULE_DEVICE_TABLE(of, cal_of_match);
 #endif
 
+static int cal_runtime_resume(struct device *dev)
+{
+	struct cal_dev *caldev = dev_get_drvdata(dev);
+
+	if (caldev->flags & DRA72_CAL_PRE_ES2_LDO_DISABLE) {
+		/*
+		 * Apply errata on both port everytime we (re-)enable
+		 * the clock
+		 */
+		i913_errata(caldev, 0);
+		i913_errata(caldev, 1);
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops cal_pm_ops = {
+	.runtime_resume = cal_runtime_resume,
+};
+
 static struct platform_driver cal_pdrv = {
 	.probe		= cal_probe,
 	.remove		= cal_remove,
 	.driver		= {
 		.name	= CAL_MODULE_NAME,
+		.pm	= &cal_pm_ops,
 		.of_match_table = of_match_ptr(cal_of_match),
 	},
 };
diff --git a/drivers/media/platform/ti-vpe/cal_regs.h b/drivers/media/platform/ti-vpe/cal_regs.h
index 0b76d1186074..ac54a2fe7bb6 100644
--- a/drivers/media/platform/ti-vpe/cal_regs.h
+++ b/drivers/media/platform/ti-vpe/cal_regs.h
@@ -100,15 +100,6 @@
 /* CAL Control Module Core Camerrx Control register offsets */
 #define CM_CTRL_CORE_CAMERRX_CONTROL	0x000
 
-/*********************************************************************
-* Generic value used in various field below
-*********************************************************************/
-
-#define CAL_GEN_DISABLE			0
-#define CAL_GEN_ENABLE			1
-#define CAL_GEN_FALSE			0
-#define CAL_GEN_TRUE			1
-
 /*********************************************************************
 * Field Definition Macros
 *********************************************************************/
@@ -151,12 +142,11 @@
 #define CAL_HL_IRQ_EOI_LINE_NUMBER_EOI0			0
 
 #define CAL_HL_IRQ_MASK(m)			BIT((m) - 1)
-#define CAL_HL_IRQ_NOACTION				0x0
-#define CAL_HL_IRQ_ENABLE				0x1
-#define CAL_HL_IRQ_CLEAR				0x1
-#define CAL_HL_IRQ_DISABLED				0x0
-#define CAL_HL_IRQ_ENABLED				0x1
-#define CAL_HL_IRQ_PENDING				0x1
+
+#define CAL_HL_IRQ_OCPO_ERR_MASK		BIT(6)
+
+#define CAL_HL_IRQ_CIO_MASK(i)			BIT(16 + ((i) - 1) * 8)
+#define CAL_HL_IRQ_VC_MASK(i)			BIT(17 + ((i) - 1) * 8)
 
 #define CAL_PIX_PROC_EN_MASK			BIT(0)
 #define CAL_PIX_PROC_EXTRACT_MASK		GENMASK(4, 1)
@@ -414,6 +404,7 @@
 #define CAL_CSI2_COMPLEXIO_IRQ_ERRCONTROL3_MASK		BIT(17)
 #define CAL_CSI2_COMPLEXIO_IRQ_ERRCONTROL4_MASK		BIT(18)
 #define CAL_CSI2_COMPLEXIO_IRQ_ERRCONTROL5_MASK		BIT(19)
+#define CAL_CSI2_COMPLEXIO_IRQ_LANE_ERRORS_MASK		GENMASK(19, 0)
 #define CAL_CSI2_COMPLEXIO_IRQ_STATEULPM1_MASK		BIT(20)
 #define CAL_CSI2_COMPLEXIO_IRQ_STATEULPM2_MASK		BIT(21)
 #define CAL_CSI2_COMPLEXIO_IRQ_STATEULPM3_MASK		BIT(22)
diff --git a/drivers/media/platform/vicodec/Kconfig b/drivers/media/platform/vicodec/Kconfig
deleted file mode 100644
index 89456665cb16..000000000000
--- a/drivers/media/platform/vicodec/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config VIDEO_VICODEC
-	tristate "Virtual Codec Driver"
-	depends on VIDEO_DEV && VIDEO_V4L2
-	select VIDEOBUF2_VMALLOC
-	select V4L2_MEM2MEM_DEV
-	help
-	  Driver for a Virtual Codec
-
-	  This driver can be compared to the vim2m driver for emulating
-	  a video device node that exposes an emulated hardware codec.
-
-	  When in doubt, say N.
diff --git a/drivers/media/platform/vicodec/Makefile b/drivers/media/platform/vicodec/Makefile
deleted file mode 100644
index 01bf7e9308a6..000000000000
--- a/drivers/media/platform/vicodec/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-vicodec-objs := vicodec-core.o codec-fwht.o codec-v4l2-fwht.o
-
-obj-$(CONFIG_VIDEO_VICODEC) += vicodec.o
diff --git a/drivers/media/platform/vicodec/codec-fwht.c b/drivers/media/platform/vicodec/codec-fwht.c
deleted file mode 100644
index 31faf319e508..000000000000
--- a/drivers/media/platform/vicodec/codec-fwht.c
+++ /dev/null
@@ -1,958 +0,0 @@
-// SPDX-License-Identifier: LGPL-2.1+
-/*
- * Copyright 2016 Tom aan de Wiel
- * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- *
- * 8x8 Fast Walsh Hadamard Transform in sequency order based on the paper:
- *
- * A Recursive Algorithm for Sequency-Ordered Fast Walsh Transforms,
- * R.D. Brown, 1977
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include "codec-fwht.h"
-
-#define OVERFLOW_BIT BIT(14)
-
-/*
- * Note: bit 0 of the header must always be 0. Otherwise it cannot
- * be guaranteed that the magic 8 byte sequence (see below) can
- * never occur in the rlc output.
- */
-#define PFRAME_BIT BIT(15)
-#define DUPS_MASK 0x1ffe
-
-#define PBLOCK 0
-#define IBLOCK 1
-
-#define ALL_ZEROS 15
-
-static const uint8_t zigzag[64] = {
-	0,
-	1,  8,
-	2,  9, 16,
-	3, 10, 17, 24,
-	4, 11, 18, 25, 32,
-	5, 12, 19, 26, 33, 40,
-	6, 13, 20, 27, 34, 41, 48,
-	7, 14, 21, 28, 35, 42, 49, 56,
-	15, 22, 29, 36, 43, 50, 57,
-	23, 30, 37, 44, 51, 58,
-	31, 38, 45, 52, 59,
-	39, 46, 53, 60,
-	47, 54, 61,
-	55, 62,
-	63,
-};
-
-/*
- * noinline_for_stack to work around
- * https://bugs.llvm.org/show_bug.cgi?id=38809
- */
-static int noinline_for_stack
-rlc(const s16 *in, __be16 *output, int blocktype)
-{
-	s16 block[8 * 8];
-	s16 *wp = block;
-	int i = 0;
-	int x, y;
-	int ret = 0;
-
-	/* read in block from framebuffer */
-	int lastzero_run = 0;
-	int to_encode;
-
-	for (y = 0; y < 8; y++) {
-		for (x = 0; x < 8; x++) {
-			*wp = in[x + y * 8];
-			wp++;
-		}
-	}
-
-	/* keep track of amount of trailing zeros */
-	for (i = 63; i >= 0 && !block[zigzag[i]]; i--)
-		lastzero_run++;
-
-	*output++ = (blocktype == PBLOCK ? htons(PFRAME_BIT) : 0);
-	ret++;
-
-	to_encode = 8 * 8 - (lastzero_run > 14 ? lastzero_run : 0);
-
-	i = 0;
-	while (i < to_encode) {
-		int cnt = 0;
-		int tmp;
-
-		/* count leading zeros */
-		while ((tmp = block[zigzag[i]]) == 0 && cnt < 14) {
-			cnt++;
-			i++;
-			if (i == to_encode) {
-				cnt--;
-				break;
-			}
-		}
-		/* 4 bits for run, 12 for coefficient (quantization by 4) */
-		*output++ = htons((cnt | tmp << 4));
-		i++;
-		ret++;
-	}
-	if (lastzero_run > 14) {
-		*output = htons(ALL_ZEROS | 0);
-		ret++;
-	}
-
-	return ret;
-}
-
-/*
- * This function will worst-case increase rlc_in by 65*2 bytes:
- * one s16 value for the header and 8 * 8 coefficients of type s16.
- */
-static noinline_for_stack u16
-derlc(const __be16 **rlc_in, s16 *dwht_out, const __be16 *end_of_input)
-{
-	/* header */
-	const __be16 *input = *rlc_in;
-	u16 stat;
-	int dec_count = 0;
-	s16 block[8 * 8 + 16];
-	s16 *wp = block;
-	int i;
-
-	if (input > end_of_input)
-		return OVERFLOW_BIT;
-	stat = ntohs(*input++);
-
-	/*
-	 * Now de-compress, it expands one byte to up to 15 bytes
-	 * (or fills the remainder of the 64 bytes with zeroes if it
-	 * is the last byte to expand).
-	 *
-	 * So block has to be 8 * 8 + 16 bytes, the '+ 16' is to
-	 * allow for overflow if the incoming data was malformed.
-	 */
-	while (dec_count < 8 * 8) {
-		s16 in;
-		int length;
-		int coeff;
-
-		if (input > end_of_input)
-			return OVERFLOW_BIT;
-		in = ntohs(*input++);
-		length = in & 0xf;
-		coeff = in >> 4;
-
-		/* fill remainder with zeros */
-		if (length == 15) {
-			for (i = 0; i < 64 - dec_count; i++)
-				*wp++ = 0;
-			break;
-		}
-
-		for (i = 0; i < length; i++)
-			*wp++ = 0;
-		*wp++ = coeff;
-		dec_count += length + 1;
-	}
-
-	wp = block;
-
-	for (i = 0; i < 64; i++) {
-		int pos = zigzag[i];
-		int y = pos / 8;
-		int x = pos % 8;
-
-		dwht_out[x + y * 8] = *wp++;
-	}
-	*rlc_in = input;
-	return stat;
-}
-
-static const int quant_table[] = {
-	2, 2, 2, 2, 2, 2,  2,  2,
-	2, 2, 2, 2, 2, 2,  2,  2,
-	2, 2, 2, 2, 2, 2,  2,  3,
-	2, 2, 2, 2, 2, 2,  3,  6,
-	2, 2, 2, 2, 2, 3,  6,  6,
-	2, 2, 2, 2, 3, 6,  6,  6,
-	2, 2, 2, 3, 6, 6,  6,  6,
-	2, 2, 3, 6, 6, 6,  6,  8,
-};
-
-static const int quant_table_p[] = {
-	3, 3, 3, 3, 3, 3,  3,  3,
-	3, 3, 3, 3, 3, 3,  3,  3,
-	3, 3, 3, 3, 3, 3,  3,  3,
-	3, 3, 3, 3, 3, 3,  3,  6,
-	3, 3, 3, 3, 3, 3,  6,  6,
-	3, 3, 3, 3, 3, 6,  6,  9,
-	3, 3, 3, 3, 6, 6,  9,  9,
-	3, 3, 3, 6, 6, 9,  9,  10,
-};
-
-static void quantize_intra(s16 *coeff, s16 *de_coeff, u16 qp)
-{
-	const int *quant = quant_table;
-	int i, j;
-
-	for (j = 0; j < 8; j++) {
-		for (i = 0; i < 8; i++, quant++, coeff++, de_coeff++) {
-			*coeff >>= *quant;
-			if (*coeff >= -qp && *coeff <= qp)
-				*coeff = *de_coeff = 0;
-			else
-				*de_coeff = *coeff << *quant;
-		}
-	}
-}
-
-static void dequantize_intra(s16 *coeff)
-{
-	const int *quant = quant_table;
-	int i, j;
-
-	for (j = 0; j < 8; j++)
-		for (i = 0; i < 8; i++, quant++, coeff++)
-			*coeff <<= *quant;
-}
-
-static void quantize_inter(s16 *coeff, s16 *de_coeff, u16 qp)
-{
-	const int *quant = quant_table_p;
-	int i, j;
-
-	for (j = 0; j < 8; j++) {
-		for (i = 0; i < 8; i++, quant++, coeff++, de_coeff++) {
-			*coeff >>= *quant;
-			if (*coeff >= -qp && *coeff <= qp)
-				*coeff = *de_coeff = 0;
-			else
-				*de_coeff = *coeff << *quant;
-		}
-	}
-}
-
-static void dequantize_inter(s16 *coeff)
-{
-	const int *quant = quant_table_p;
-	int i, j;
-
-	for (j = 0; j < 8; j++)
-		for (i = 0; i < 8; i++, quant++, coeff++)
-			*coeff <<= *quant;
-}
-
-static void noinline_for_stack fwht(const u8 *block, s16 *output_block,
-				    unsigned int stride,
-				    unsigned int input_step, bool intra)
-{
-	/* we'll need more than 8 bits for the transformed coefficients */
-	s32 workspace1[8], workspace2[8];
-	const u8 *tmp = block;
-	s16 *out = output_block;
-	int add = intra ? 256 : 0;
-	unsigned int i;
-
-	/* stage 1 */
-	for (i = 0; i < 8; i++, tmp += stride, out += 8) {
-		switch (input_step) {
-		case 1:
-			workspace1[0]  = tmp[0] + tmp[1] - add;
-			workspace1[1]  = tmp[0] - tmp[1];
-
-			workspace1[2]  = tmp[2] + tmp[3] - add;
-			workspace1[3]  = tmp[2] - tmp[3];
-
-			workspace1[4]  = tmp[4] + tmp[5] - add;
-			workspace1[5]  = tmp[4] - tmp[5];
-
-			workspace1[6]  = tmp[6] + tmp[7] - add;
-			workspace1[7]  = tmp[6] - tmp[7];
-			break;
-		case 2:
-			workspace1[0]  = tmp[0] + tmp[2] - add;
-			workspace1[1]  = tmp[0] - tmp[2];
-
-			workspace1[2]  = tmp[4] + tmp[6] - add;
-			workspace1[3]  = tmp[4] - tmp[6];
-
-			workspace1[4]  = tmp[8] + tmp[10] - add;
-			workspace1[5]  = tmp[8] - tmp[10];
-
-			workspace1[6]  = tmp[12] + tmp[14] - add;
-			workspace1[7]  = tmp[12] - tmp[14];
-			break;
-		case 3:
-			workspace1[0]  = tmp[0] + tmp[3] - add;
-			workspace1[1]  = tmp[0] - tmp[3];
-
-			workspace1[2]  = tmp[6] + tmp[9] - add;
-			workspace1[3]  = tmp[6] - tmp[9];
-
-			workspace1[4]  = tmp[12] + tmp[15] - add;
-			workspace1[5]  = tmp[12] - tmp[15];
-
-			workspace1[6]  = tmp[18] + tmp[21] - add;
-			workspace1[7]  = tmp[18] - tmp[21];
-			break;
-		default:
-			workspace1[0]  = tmp[0] + tmp[4] - add;
-			workspace1[1]  = tmp[0] - tmp[4];
-
-			workspace1[2]  = tmp[8] + tmp[12] - add;
-			workspace1[3]  = tmp[8] - tmp[12];
-
-			workspace1[4]  = tmp[16] + tmp[20] - add;
-			workspace1[5]  = tmp[16] - tmp[20];
-
-			workspace1[6]  = tmp[24] + tmp[28] - add;
-			workspace1[7]  = tmp[24] - tmp[28];
-			break;
-		}
-
-		/* stage 2 */
-		workspace2[0] = workspace1[0] + workspace1[2];
-		workspace2[1] = workspace1[0] - workspace1[2];
-		workspace2[2] = workspace1[1] - workspace1[3];
-		workspace2[3] = workspace1[1] + workspace1[3];
-
-		workspace2[4] = workspace1[4] + workspace1[6];
-		workspace2[5] = workspace1[4] - workspace1[6];
-		workspace2[6] = workspace1[5] - workspace1[7];
-		workspace2[7] = workspace1[5] + workspace1[7];
-
-		/* stage 3 */
-		out[0] = workspace2[0] + workspace2[4];
-		out[1] = workspace2[0] - workspace2[4];
-		out[2] = workspace2[1] - workspace2[5];
-		out[3] = workspace2[1] + workspace2[5];
-		out[4] = workspace2[2] + workspace2[6];
-		out[5] = workspace2[2] - workspace2[6];
-		out[6] = workspace2[3] - workspace2[7];
-		out[7] = workspace2[3] + workspace2[7];
-	}
-
-	out = output_block;
-
-	for (i = 0; i < 8; i++, out++) {
-		/* stage 1 */
-		workspace1[0]  = out[0] + out[1 * 8];
-		workspace1[1]  = out[0] - out[1 * 8];
-
-		workspace1[2]  = out[2 * 8] + out[3 * 8];
-		workspace1[3]  = out[2 * 8] - out[3 * 8];
-
-		workspace1[4]  = out[4 * 8] + out[5 * 8];
-		workspace1[5]  = out[4 * 8] - out[5 * 8];
-
-		workspace1[6]  = out[6 * 8] + out[7 * 8];
-		workspace1[7]  = out[6 * 8] - out[7 * 8];
-
-		/* stage 2 */
-		workspace2[0] = workspace1[0] + workspace1[2];
-		workspace2[1] = workspace1[0] - workspace1[2];
-		workspace2[2] = workspace1[1] - workspace1[3];
-		workspace2[3] = workspace1[1] + workspace1[3];
-
-		workspace2[4] = workspace1[4] + workspace1[6];
-		workspace2[5] = workspace1[4] - workspace1[6];
-		workspace2[6] = workspace1[5] - workspace1[7];
-		workspace2[7] = workspace1[5] + workspace1[7];
-		/* stage 3 */
-		out[0 * 8] = workspace2[0] + workspace2[4];
-		out[1 * 8] = workspace2[0] - workspace2[4];
-		out[2 * 8] = workspace2[1] - workspace2[5];
-		out[3 * 8] = workspace2[1] + workspace2[5];
-		out[4 * 8] = workspace2[2] + workspace2[6];
-		out[5 * 8] = workspace2[2] - workspace2[6];
-		out[6 * 8] = workspace2[3] - workspace2[7];
-		out[7 * 8] = workspace2[3] + workspace2[7];
-	}
-}
-
-/*
- * Not the nicest way of doing it, but P-blocks get twice the range of
- * that of the I-blocks. Therefore we need a type bigger than 8 bits.
- * Furthermore values can be negative... This is just a version that
- * works with 16 signed data
- */
-static void noinline_for_stack
-fwht16(const s16 *block, s16 *output_block, int stride, int intra)
-{
-	/* we'll need more than 8 bits for the transformed coefficients */
-	s32 workspace1[8], workspace2[8];
-	const s16 *tmp = block;
-	s16 *out = output_block;
-	int i;
-
-	for (i = 0; i < 8; i++, tmp += stride, out += 8) {
-		/* stage 1 */
-		workspace1[0]  = tmp[0] + tmp[1];
-		workspace1[1]  = tmp[0] - tmp[1];
-
-		workspace1[2]  = tmp[2] + tmp[3];
-		workspace1[3]  = tmp[2] - tmp[3];
-
-		workspace1[4]  = tmp[4] + tmp[5];
-		workspace1[5]  = tmp[4] - tmp[5];
-
-		workspace1[6]  = tmp[6] + tmp[7];
-		workspace1[7]  = tmp[6] - tmp[7];
-
-		/* stage 2 */
-		workspace2[0] = workspace1[0] + workspace1[2];
-		workspace2[1] = workspace1[0] - workspace1[2];
-		workspace2[2] = workspace1[1] - workspace1[3];
-		workspace2[3] = workspace1[1] + workspace1[3];
-
-		workspace2[4] = workspace1[4] + workspace1[6];
-		workspace2[5] = workspace1[4] - workspace1[6];
-		workspace2[6] = workspace1[5] - workspace1[7];
-		workspace2[7] = workspace1[5] + workspace1[7];
-
-		/* stage 3 */
-		out[0] = workspace2[0] + workspace2[4];
-		out[1] = workspace2[0] - workspace2[4];
-		out[2] = workspace2[1] - workspace2[5];
-		out[3] = workspace2[1] + workspace2[5];
-		out[4] = workspace2[2] + workspace2[6];
-		out[5] = workspace2[2] - workspace2[6];
-		out[6] = workspace2[3] - workspace2[7];
-		out[7] = workspace2[3] + workspace2[7];
-	}
-
-	out = output_block;
-
-	for (i = 0; i < 8; i++, out++) {
-		/* stage 1 */
-		workspace1[0]  = out[0] + out[1*8];
-		workspace1[1]  = out[0] - out[1*8];
-
-		workspace1[2]  = out[2*8] + out[3*8];
-		workspace1[3]  = out[2*8] - out[3*8];
-
-		workspace1[4]  = out[4*8] + out[5*8];
-		workspace1[5]  = out[4*8] - out[5*8];
-
-		workspace1[6]  = out[6*8] + out[7*8];
-		workspace1[7]  = out[6*8] - out[7*8];
-
-		/* stage 2 */
-		workspace2[0] = workspace1[0] + workspace1[2];
-		workspace2[1] = workspace1[0] - workspace1[2];
-		workspace2[2] = workspace1[1] - workspace1[3];
-		workspace2[3] = workspace1[1] + workspace1[3];
-
-		workspace2[4] = workspace1[4] + workspace1[6];
-		workspace2[5] = workspace1[4] - workspace1[6];
-		workspace2[6] = workspace1[5] - workspace1[7];
-		workspace2[7] = workspace1[5] + workspace1[7];
-
-		/* stage 3 */
-		out[0*8] = workspace2[0] + workspace2[4];
-		out[1*8] = workspace2[0] - workspace2[4];
-		out[2*8] = workspace2[1] - workspace2[5];
-		out[3*8] = workspace2[1] + workspace2[5];
-		out[4*8] = workspace2[2] + workspace2[6];
-		out[5*8] = workspace2[2] - workspace2[6];
-		out[6*8] = workspace2[3] - workspace2[7];
-		out[7*8] = workspace2[3] + workspace2[7];
-	}
-}
-
-static noinline_for_stack void
-ifwht(const s16 *block, s16 *output_block, int intra)
-{
-	/*
-	 * we'll need more than 8 bits for the transformed coefficients
-	 * use native unit of cpu
-	 */
-	int workspace1[8], workspace2[8];
-	int inter = intra ? 0 : 1;
-	const s16 *tmp = block;
-	s16 *out = output_block;
-	int i;
-
-	for (i = 0; i < 8; i++, tmp += 8, out += 8) {
-		/* stage 1 */
-		workspace1[0]  = tmp[0] + tmp[1];
-		workspace1[1]  = tmp[0] - tmp[1];
-
-		workspace1[2]  = tmp[2] + tmp[3];
-		workspace1[3]  = tmp[2] - tmp[3];
-
-		workspace1[4]  = tmp[4] + tmp[5];
-		workspace1[5]  = tmp[4] - tmp[5];
-
-		workspace1[6]  = tmp[6] + tmp[7];
-		workspace1[7]  = tmp[6] - tmp[7];
-
-		/* stage 2 */
-		workspace2[0] = workspace1[0] + workspace1[2];
-		workspace2[1] = workspace1[0] - workspace1[2];
-		workspace2[2] = workspace1[1] - workspace1[3];
-		workspace2[3] = workspace1[1] + workspace1[3];
-
-		workspace2[4] = workspace1[4] + workspace1[6];
-		workspace2[5] = workspace1[4] - workspace1[6];
-		workspace2[6] = workspace1[5] - workspace1[7];
-		workspace2[7] = workspace1[5] + workspace1[7];
-
-		/* stage 3 */
-		out[0] = workspace2[0] + workspace2[4];
-		out[1] = workspace2[0] - workspace2[4];
-		out[2] = workspace2[1] - workspace2[5];
-		out[3] = workspace2[1] + workspace2[5];
-		out[4] = workspace2[2] + workspace2[6];
-		out[5] = workspace2[2] - workspace2[6];
-		out[6] = workspace2[3] - workspace2[7];
-		out[7] = workspace2[3] + workspace2[7];
-	}
-
-	out = output_block;
-
-	for (i = 0; i < 8; i++, out++) {
-		/* stage 1 */
-		workspace1[0]  = out[0] + out[1 * 8];
-		workspace1[1]  = out[0] - out[1 * 8];
-
-		workspace1[2]  = out[2 * 8] + out[3 * 8];
-		workspace1[3]  = out[2 * 8] - out[3 * 8];
-
-		workspace1[4]  = out[4 * 8] + out[5 * 8];
-		workspace1[5]  = out[4 * 8] - out[5 * 8];
-
-		workspace1[6]  = out[6 * 8] + out[7 * 8];
-		workspace1[7]  = out[6 * 8] - out[7 * 8];
-
-		/* stage 2 */
-		workspace2[0] = workspace1[0] + workspace1[2];
-		workspace2[1] = workspace1[0] - workspace1[2];
-		workspace2[2] = workspace1[1] - workspace1[3];
-		workspace2[3] = workspace1[1] + workspace1[3];
-
-		workspace2[4] = workspace1[4] + workspace1[6];
-		workspace2[5] = workspace1[4] - workspace1[6];
-		workspace2[6] = workspace1[5] - workspace1[7];
-		workspace2[7] = workspace1[5] + workspace1[7];
-
-		/* stage 3 */
-		if (inter) {
-			int d;
-
-			out[0 * 8] = workspace2[0] + workspace2[4];
-			out[1 * 8] = workspace2[0] - workspace2[4];
-			out[2 * 8] = workspace2[1] - workspace2[5];
-			out[3 * 8] = workspace2[1] + workspace2[5];
-			out[4 * 8] = workspace2[2] + workspace2[6];
-			out[5 * 8] = workspace2[2] - workspace2[6];
-			out[6 * 8] = workspace2[3] - workspace2[7];
-			out[7 * 8] = workspace2[3] + workspace2[7];
-
-			for (d = 0; d < 8; d++)
-				out[8 * d] >>= 6;
-		} else {
-			int d;
-
-			out[0 * 8] = workspace2[0] + workspace2[4];
-			out[1 * 8] = workspace2[0] - workspace2[4];
-			out[2 * 8] = workspace2[1] - workspace2[5];
-			out[3 * 8] = workspace2[1] + workspace2[5];
-			out[4 * 8] = workspace2[2] + workspace2[6];
-			out[5 * 8] = workspace2[2] - workspace2[6];
-			out[6 * 8] = workspace2[3] - workspace2[7];
-			out[7 * 8] = workspace2[3] + workspace2[7];
-
-			for (d = 0; d < 8; d++) {
-				out[8 * d] >>= 6;
-				out[8 * d] += 128;
-			}
-		}
-	}
-}
-
-static void fill_encoder_block(const u8 *input, s16 *dst,
-			       unsigned int stride, unsigned int input_step)
-{
-	int i, j;
-
-	for (i = 0; i < 8; i++) {
-		for (j = 0; j < 8; j++, input += input_step)
-			*dst++ = *input;
-		input += stride - 8 * input_step;
-	}
-}
-
-static int var_intra(const s16 *input)
-{
-	int32_t mean = 0;
-	int32_t ret = 0;
-	const s16 *tmp = input;
-	int i;
-
-	for (i = 0; i < 8 * 8; i++, tmp++)
-		mean += *tmp;
-	mean /= 64;
-	tmp = input;
-	for (i = 0; i < 8 * 8; i++, tmp++)
-		ret += (*tmp - mean) < 0 ? -(*tmp - mean) : (*tmp - mean);
-	return ret;
-}
-
-static int var_inter(const s16 *old, const s16 *new)
-{
-	int32_t ret = 0;
-	int i;
-
-	for (i = 0; i < 8 * 8; i++, old++, new++)
-		ret += (*old - *new) < 0 ? -(*old - *new) : (*old - *new);
-	return ret;
-}
-
-static noinline_for_stack int
-decide_blocktype(const u8 *cur, const u8 *reference, s16 *deltablock,
-		 unsigned int stride, unsigned int input_step)
-{
-	s16 tmp[64];
-	s16 old[64];
-	s16 *work = tmp;
-	unsigned int k, l;
-	int vari;
-	int vard;
-
-	fill_encoder_block(cur, tmp, stride, input_step);
-	fill_encoder_block(reference, old, 8, 1);
-	vari = var_intra(tmp);
-
-	for (k = 0; k < 8; k++) {
-		for (l = 0; l < 8; l++) {
-			*deltablock = *work - *reference;
-			deltablock++;
-			work++;
-			reference++;
-		}
-	}
-	deltablock -= 64;
-	vard = var_inter(old, tmp);
-	return vari <= vard ? IBLOCK : PBLOCK;
-}
-
-static void fill_decoder_block(u8 *dst, const s16 *input, int stride,
-			       unsigned int dst_step)
-{
-	int i, j;
-
-	for (i = 0; i < 8; i++) {
-		for (j = 0; j < 8; j++, input++, dst += dst_step) {
-			if (*input < 0)
-				*dst = 0;
-			else if (*input > 255)
-				*dst = 255;
-			else
-				*dst = *input;
-		}
-		dst += stride - (8 * dst_step);
-	}
-}
-
-static void add_deltas(s16 *deltas, const u8 *ref, int stride,
-		       unsigned int ref_step)
-{
-	int k, l;
-
-	for (k = 0; k < 8; k++) {
-		for (l = 0; l < 8; l++) {
-			*deltas += *ref;
-			ref += ref_step;
-			/*
-			 * Due to quantizing, it might possible that the
-			 * decoded coefficients are slightly out of range
-			 */
-			if (*deltas < 0)
-				*deltas = 0;
-			else if (*deltas > 255)
-				*deltas = 255;
-			deltas++;
-		}
-		ref += stride - (8 * ref_step);
-	}
-}
-
-static u32 encode_plane(u8 *input, u8 *refp, __be16 **rlco, __be16 *rlco_max,
-			struct fwht_cframe *cf, u32 height, u32 width,
-			u32 stride, unsigned int input_step,
-			bool is_intra, bool next_is_intra)
-{
-	u8 *input_start = input;
-	__be16 *rlco_start = *rlco;
-	s16 deltablock[64];
-	__be16 pframe_bit = htons(PFRAME_BIT);
-	u32 encoding = 0;
-	unsigned int last_size = 0;
-	unsigned int i, j;
-
-	width = round_up(width, 8);
-	height = round_up(height, 8);
-
-	for (j = 0; j < height / 8; j++) {
-		input = input_start + j * 8 * stride;
-		for (i = 0; i < width / 8; i++) {
-			/* intra code, first frame is always intra coded. */
-			int blocktype = IBLOCK;
-			unsigned int size;
-
-			if (!is_intra)
-				blocktype = decide_blocktype(input, refp,
-					deltablock, stride, input_step);
-			if (blocktype == IBLOCK) {
-				fwht(input, cf->coeffs, stride, input_step, 1);
-				quantize_intra(cf->coeffs, cf->de_coeffs,
-					       cf->i_frame_qp);
-			} else {
-				/* inter code */
-				encoding |= FWHT_FRAME_PCODED;
-				fwht16(deltablock, cf->coeffs, 8, 0);
-				quantize_inter(cf->coeffs, cf->de_coeffs,
-					       cf->p_frame_qp);
-			}
-			if (!next_is_intra) {
-				ifwht(cf->de_coeffs, cf->de_fwht, blocktype);
-
-				if (blocktype == PBLOCK)
-					add_deltas(cf->de_fwht, refp, 8, 1);
-				fill_decoder_block(refp, cf->de_fwht, 8, 1);
-			}
-
-			input += 8 * input_step;
-			refp += 8 * 8;
-
-			size = rlc(cf->coeffs, *rlco, blocktype);
-			if (last_size == size &&
-			    !memcmp(*rlco + 1, *rlco - size + 1, 2 * size - 2)) {
-				__be16 *last_rlco = *rlco - size;
-				s16 hdr = ntohs(*last_rlco);
-
-				if (!((*last_rlco ^ **rlco) & pframe_bit) &&
-				    (hdr & DUPS_MASK) < DUPS_MASK)
-					*last_rlco = htons(hdr + 2);
-				else
-					*rlco += size;
-			} else {
-				*rlco += size;
-			}
-			if (*rlco >= rlco_max) {
-				encoding |= FWHT_FRAME_UNENCODED;
-				goto exit_loop;
-			}
-			last_size = size;
-		}
-	}
-
-exit_loop:
-	if (encoding & FWHT_FRAME_UNENCODED) {
-		u8 *out = (u8 *)rlco_start;
-		u8 *p;
-
-		input = input_start;
-		/*
-		 * The compressed stream should never contain the magic
-		 * header, so when we copy the YUV data we replace 0xff
-		 * by 0xfe. Since YUV is limited range such values
-		 * shouldn't appear anyway.
-		 */
-		for (j = 0; j < height; j++) {
-			for (i = 0, p = input; i < width; i++, p += input_step)
-				*out++ = (*p == 0xff) ? 0xfe : *p;
-			input += stride;
-		}
-		*rlco = (__be16 *)out;
-		encoding &= ~FWHT_FRAME_PCODED;
-	}
-	return encoding;
-}
-
-u32 fwht_encode_frame(struct fwht_raw_frame *frm,
-		      struct fwht_raw_frame *ref_frm,
-		      struct fwht_cframe *cf,
-		      bool is_intra, bool next_is_intra,
-		      unsigned int width, unsigned int height,
-		      unsigned int stride, unsigned int chroma_stride)
-{
-	unsigned int size = height * width;
-	__be16 *rlco = cf->rlc_data;
-	__be16 *rlco_max;
-	u32 encoding;
-
-	rlco_max = rlco + size / 2 - 256;
-	encoding = encode_plane(frm->luma, ref_frm->luma, &rlco, rlco_max, cf,
-				height, width, stride,
-				frm->luma_alpha_step, is_intra, next_is_intra);
-	if (encoding & FWHT_FRAME_UNENCODED)
-		encoding |= FWHT_LUMA_UNENCODED;
-	encoding &= ~FWHT_FRAME_UNENCODED;
-
-	if (frm->components_num >= 3) {
-		u32 chroma_h = height / frm->height_div;
-		u32 chroma_w = width / frm->width_div;
-		unsigned int chroma_size = chroma_h * chroma_w;
-
-		rlco_max = rlco + chroma_size / 2 - 256;
-		encoding |= encode_plane(frm->cb, ref_frm->cb, &rlco, rlco_max,
-					 cf, chroma_h, chroma_w,
-					 chroma_stride, frm->chroma_step,
-					 is_intra, next_is_intra);
-		if (encoding & FWHT_FRAME_UNENCODED)
-			encoding |= FWHT_CB_UNENCODED;
-		encoding &= ~FWHT_FRAME_UNENCODED;
-		rlco_max = rlco + chroma_size / 2 - 256;
-		encoding |= encode_plane(frm->cr, ref_frm->cr, &rlco, rlco_max,
-					 cf, chroma_h, chroma_w,
-					 chroma_stride, frm->chroma_step,
-					 is_intra, next_is_intra);
-		if (encoding & FWHT_FRAME_UNENCODED)
-			encoding |= FWHT_CR_UNENCODED;
-		encoding &= ~FWHT_FRAME_UNENCODED;
-	}
-
-	if (frm->components_num == 4) {
-		rlco_max = rlco + size / 2 - 256;
-		encoding |= encode_plane(frm->alpha, ref_frm->alpha, &rlco,
-					 rlco_max, cf, height, width,
-					 stride, frm->luma_alpha_step,
-					 is_intra, next_is_intra);
-		if (encoding & FWHT_FRAME_UNENCODED)
-			encoding |= FWHT_ALPHA_UNENCODED;
-		encoding &= ~FWHT_FRAME_UNENCODED;
-	}
-
-	cf->size = (rlco - cf->rlc_data) * sizeof(*rlco);
-	return encoding;
-}
-
-static bool decode_plane(struct fwht_cframe *cf, const __be16 **rlco,
-			 u32 height, u32 width, const u8 *ref, u32 ref_stride,
-			 unsigned int ref_step, u8 *dst,
-			 unsigned int dst_stride, unsigned int dst_step,
-			 bool uncompressed, const __be16 *end_of_rlco_buf)
-{
-	unsigned int copies = 0;
-	s16 copy[8 * 8];
-	u16 stat;
-	unsigned int i, j;
-	bool is_intra = !ref;
-
-	width = round_up(width, 8);
-	height = round_up(height, 8);
-
-	if (uncompressed) {
-		int i;
-
-		if (end_of_rlco_buf + 1 < *rlco + width * height / 2)
-			return false;
-		for (i = 0; i < height; i++) {
-			memcpy(dst, *rlco, width);
-			dst += dst_stride;
-			*rlco += width / 2;
-		}
-		return true;
-	}
-
-	/*
-	 * When decoding each macroblock the rlco pointer will be increased
-	 * by 65 * 2 bytes worst-case.
-	 * To avoid overflow the buffer has to be 65/64th of the actual raw
-	 * image size, just in case someone feeds it malicious data.
-	 */
-	for (j = 0; j < height / 8; j++) {
-		for (i = 0; i < width / 8; i++) {
-			const u8 *refp = ref + j * 8 * ref_stride +
-				i * 8 * ref_step;
-			u8 *dstp = dst + j * 8 * dst_stride + i * 8 * dst_step;
-
-			if (copies) {
-				memcpy(cf->de_fwht, copy, sizeof(copy));
-				if ((stat & PFRAME_BIT) && !is_intra)
-					add_deltas(cf->de_fwht, refp,
-						   ref_stride, ref_step);
-				fill_decoder_block(dstp, cf->de_fwht,
-						   dst_stride, dst_step);
-				copies--;
-				continue;
-			}
-
-			stat = derlc(rlco, cf->coeffs, end_of_rlco_buf);
-			if (stat & OVERFLOW_BIT)
-				return false;
-			if ((stat & PFRAME_BIT) && !is_intra)
-				dequantize_inter(cf->coeffs);
-			else
-				dequantize_intra(cf->coeffs);
-
-			ifwht(cf->coeffs, cf->de_fwht,
-			      ((stat & PFRAME_BIT) && !is_intra) ? 0 : 1);
-
-			copies = (stat & DUPS_MASK) >> 1;
-			if (copies)
-				memcpy(copy, cf->de_fwht, sizeof(copy));
-			if ((stat & PFRAME_BIT) && !is_intra)
-				add_deltas(cf->de_fwht, refp,
-					   ref_stride, ref_step);
-			fill_decoder_block(dstp, cf->de_fwht, dst_stride,
-					   dst_step);
-		}
-	}
-	return true;
-}
-
-bool fwht_decode_frame(struct fwht_cframe *cf, u32 hdr_flags,
-		       unsigned int components_num, unsigned int width,
-		       unsigned int height, const struct fwht_raw_frame *ref,
-		       unsigned int ref_stride, unsigned int ref_chroma_stride,
-		       struct fwht_raw_frame *dst, unsigned int dst_stride,
-		       unsigned int dst_chroma_stride)
-{
-	const __be16 *rlco = cf->rlc_data;
-	const __be16 *end_of_rlco_buf = cf->rlc_data +
-			(cf->size / sizeof(*rlco)) - 1;
-
-	if (!decode_plane(cf, &rlco, height, width, ref->luma, ref_stride,
-			  ref->luma_alpha_step, dst->luma, dst_stride,
-			  dst->luma_alpha_step,
-			  hdr_flags & FWHT_FL_LUMA_IS_UNCOMPRESSED,
-			  end_of_rlco_buf))
-		return false;
-
-	if (components_num >= 3) {
-		u32 h = height;
-		u32 w = width;
-
-		if (!(hdr_flags & FWHT_FL_CHROMA_FULL_HEIGHT))
-			h /= 2;
-		if (!(hdr_flags & FWHT_FL_CHROMA_FULL_WIDTH))
-			w /= 2;
-
-		if (!decode_plane(cf, &rlco, h, w, ref->cb, ref_chroma_stride,
-				  ref->chroma_step, dst->cb, dst_chroma_stride,
-				  dst->chroma_step,
-				  hdr_flags & FWHT_FL_CB_IS_UNCOMPRESSED,
-				  end_of_rlco_buf))
-			return false;
-		if (!decode_plane(cf, &rlco, h, w, ref->cr, ref_chroma_stride,
-				  ref->chroma_step, dst->cr, dst_chroma_stride,
-				  dst->chroma_step,
-				  hdr_flags & FWHT_FL_CR_IS_UNCOMPRESSED,
-				  end_of_rlco_buf))
-			return false;
-	}
-
-	if (components_num == 4)
-		if (!decode_plane(cf, &rlco, height, width, ref->alpha, ref_stride,
-				  ref->luma_alpha_step, dst->alpha, dst_stride,
-				  dst->luma_alpha_step,
-				  hdr_flags & FWHT_FL_ALPHA_IS_UNCOMPRESSED,
-				  end_of_rlco_buf))
-			return false;
-	return true;
-}
diff --git a/drivers/media/platform/vicodec/codec-fwht.h b/drivers/media/platform/vicodec/codec-fwht.h
deleted file mode 100644
index b6fec2b1cbca..000000000000
--- a/drivers/media/platform/vicodec/codec-fwht.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: LGPL-2.1+ */
-/*
- * Copyright 2016 Tom aan de Wiel
- * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef CODEC_FWHT_H
-#define CODEC_FWHT_H
-
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <asm/byteorder.h>
-
-/*
- * The compressed format consists of a fwht_cframe_hdr struct followed by the
- * compressed frame data. The header contains the size of that data.
- * Each Y, Cb and Cr plane is compressed separately. If the compressed
- * size of each plane becomes larger than the uncompressed size, then
- * that plane is stored uncompressed and the corresponding bit is set
- * in the flags field of the header.
- *
- * Each compressed plane consists of macroblocks and each macroblock
- * is run-length-encoded. Each macroblock starts with a 16 bit value.
- * Bit 15 indicates if this is a P-coded macroblock (1) or not (0).
- * P-coded macroblocks contain a delta against the previous frame.
- *
- * Bits 1-12 contain a number. If non-zero, then this same macroblock
- * repeats that number of times. This results in a high degree of
- * compression for generated images like colorbars.
- *
- * Following this macroblock header the MB coefficients are run-length
- * encoded: the top 12 bits contain the coefficient, the bottom 4 bits
- * tell how many times this coefficient occurs. The value 0xf indicates
- * that the remainder of the macroblock should be filled with zeroes.
- *
- * All 16 and 32 bit values are stored in big-endian (network) order.
- *
- * Each fwht_cframe_hdr starts with an 8 byte magic header that is
- * guaranteed not to occur in the compressed frame data. This header
- * can be used to sync to the next frame.
- *
- * This codec uses the Fast Walsh Hadamard Transform. Tom aan de Wiel
- * developed this as part of a university project, specifically for use
- * with this driver. His project report can be found here:
- *
- * https://hverkuil.home.xs4all.nl/fwht.pdf
- */
-
-/*
- * This is a sequence of 8 bytes with the low 4 bits set to 0xf.
- *
- * This sequence cannot occur in the encoded data
- *
- * Note that these two magic values are symmetrical so endian issues here.
- */
-#define FWHT_MAGIC1 0x4f4f4f4f
-#define FWHT_MAGIC2 0xffffffff
-
-#define FWHT_VERSION 3
-
-/* Set if this is an interlaced format */
-#define FWHT_FL_IS_INTERLACED		BIT(0)
-/* Set if this is a bottom-first (NTSC) interlaced format */
-#define FWHT_FL_IS_BOTTOM_FIRST		BIT(1)
-/* Set if each 'frame' contains just one field */
-#define FWHT_FL_IS_ALTERNATE		BIT(2)
-/*
- * If FWHT_FL_IS_ALTERNATE was set, then this is set if this
- * 'frame' is the bottom field, else it is the top field.
- */
-#define FWHT_FL_IS_BOTTOM_FIELD		BIT(3)
-/* Set if this frame is uncompressed */
-#define FWHT_FL_LUMA_IS_UNCOMPRESSED	BIT(4)
-#define FWHT_FL_CB_IS_UNCOMPRESSED	BIT(5)
-#define FWHT_FL_CR_IS_UNCOMPRESSED	BIT(6)
-#define FWHT_FL_CHROMA_FULL_HEIGHT	BIT(7)
-#define FWHT_FL_CHROMA_FULL_WIDTH	BIT(8)
-#define FWHT_FL_ALPHA_IS_UNCOMPRESSED	BIT(9)
-#define FWHT_FL_I_FRAME			BIT(10)
-
-/* A 4-values flag - the number of components - 1 */
-#define FWHT_FL_COMPONENTS_NUM_MSK	GENMASK(18, 16)
-#define FWHT_FL_COMPONENTS_NUM_OFFSET	16
-
-#define FWHT_FL_PIXENC_MSK	GENMASK(20, 19)
-#define FWHT_FL_PIXENC_OFFSET	19
-#define FWHT_FL_PIXENC_YUV	(1 << FWHT_FL_PIXENC_OFFSET)
-#define FWHT_FL_PIXENC_RGB	(2 << FWHT_FL_PIXENC_OFFSET)
-#define FWHT_FL_PIXENC_HSV	(3 << FWHT_FL_PIXENC_OFFSET)
-
-/*
- * A macro to calculate the needed padding in order to make sure
- * both luma and chroma components resolutions are rounded up to
- * a multiple of 8
- */
-#define vic_round_dim(dim, div) (round_up((dim) / (div), 8) * (div))
-
-struct fwht_cframe_hdr {
-	u32 magic1;
-	u32 magic2;
-	__be32 version;
-	__be32 width, height;
-	__be32 flags;
-	__be32 colorspace;
-	__be32 xfer_func;
-	__be32 ycbcr_enc;
-	__be32 quantization;
-	__be32 size;
-};
-
-struct fwht_cframe {
-	u16 i_frame_qp;
-	u16 p_frame_qp;
-	__be16 *rlc_data;
-	s16 coeffs[8 * 8];
-	s16 de_coeffs[8 * 8];
-	s16 de_fwht[8 * 8];
-	u32 size;
-};
-
-struct fwht_raw_frame {
-	unsigned int width_div;
-	unsigned int height_div;
-	unsigned int luma_alpha_step;
-	unsigned int chroma_step;
-	unsigned int components_num;
-	u8 *buf;
-	u8 *luma, *cb, *cr, *alpha;
-};
-
-#define FWHT_FRAME_PCODED	BIT(0)
-#define FWHT_FRAME_UNENCODED	BIT(1)
-#define FWHT_LUMA_UNENCODED	BIT(2)
-#define FWHT_CB_UNENCODED	BIT(3)
-#define FWHT_CR_UNENCODED	BIT(4)
-#define FWHT_ALPHA_UNENCODED	BIT(5)
-
-u32 fwht_encode_frame(struct fwht_raw_frame *frm,
-		      struct fwht_raw_frame *ref_frm,
-		      struct fwht_cframe *cf,
-		      bool is_intra, bool next_is_intra,
-		      unsigned int width, unsigned int height,
-		      unsigned int stride, unsigned int chroma_stride);
-bool fwht_decode_frame(struct fwht_cframe *cf, u32 hdr_flags,
-		unsigned int components_num, unsigned int width,
-		unsigned int height, const struct fwht_raw_frame *ref,
-		unsigned int ref_stride, unsigned int ref_chroma_stride,
-		struct fwht_raw_frame *dst, unsigned int dst_stride,
-		unsigned int dst_chroma_stride);
-#endif
diff --git a/drivers/media/platform/vicodec/codec-v4l2-fwht.c b/drivers/media/platform/vicodec/codec-v4l2-fwht.c
deleted file mode 100644
index b6e39fbd8ad5..000000000000
--- a/drivers/media/platform/vicodec/codec-v4l2-fwht.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: LGPL-2.1
-/*
- * A V4L2 frontend for the FWHT codec
- *
- * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/videodev2.h>
-#include "codec-v4l2-fwht.h"
-
-static const struct v4l2_fwht_pixfmt_info v4l2_fwht_pixfmts[] = {
-	{ V4L2_PIX_FMT_YUV420,  1, 3, 2, 1, 1, 2, 2, 3, 3, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_YVU420,  1, 3, 2, 1, 1, 2, 2, 3, 3, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_YUV422P, 1, 2, 1, 1, 1, 2, 1, 3, 3, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_NV12,    1, 3, 2, 1, 2, 2, 2, 3, 2, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_NV21,    1, 3, 2, 1, 2, 2, 2, 3, 2, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_NV16,    1, 2, 1, 1, 2, 2, 1, 3, 2, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_NV61,    1, 2, 1, 1, 2, 2, 1, 3, 2, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_NV24,    1, 3, 1, 1, 2, 1, 1, 3, 2, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_NV42,    1, 3, 1, 1, 2, 1, 1, 3, 2, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_YUYV,    2, 2, 1, 2, 4, 2, 1, 3, 1, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_YVYU,    2, 2, 1, 2, 4, 2, 1, 3, 1, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_UYVY,    2, 2, 1, 2, 4, 2, 1, 3, 1, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_VYUY,    2, 2, 1, 2, 4, 2, 1, 3, 1, FWHT_FL_PIXENC_YUV},
-	{ V4L2_PIX_FMT_BGR24,   3, 3, 1, 3, 3, 1, 1, 3, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_RGB24,   3, 3, 1, 3, 3, 1, 1, 3, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_HSV24,   3, 3, 1, 3, 3, 1, 1, 3, 1, FWHT_FL_PIXENC_HSV},
-	{ V4L2_PIX_FMT_BGR32,   4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_XBGR32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_ABGR32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_RGB32,   4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_XRGB32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_ARGB32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_BGRX32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_BGRA32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_RGBX32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_RGBA32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
-	{ V4L2_PIX_FMT_HSV32,   4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_HSV},
-	{ V4L2_PIX_FMT_GREY,    1, 1, 1, 1, 0, 1, 1, 1, 1, FWHT_FL_PIXENC_RGB},
-};
-
-bool v4l2_fwht_validate_fmt(const struct v4l2_fwht_pixfmt_info *info,
-			    u32 width_div, u32 height_div, u32 components_num,
-			    u32 pixenc)
-{
-	if (info->width_div == width_div &&
-	    info->height_div == height_div &&
-	    (!pixenc || info->pixenc == pixenc) &&
-	    info->components_num == components_num)
-		return true;
-	return false;
-}
-
-const struct v4l2_fwht_pixfmt_info *v4l2_fwht_find_nth_fmt(u32 width_div,
-							  u32 height_div,
-							  u32 components_num,
-							  u32 pixenc,
-							  unsigned int start_idx)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(v4l2_fwht_pixfmts); i++) {
-		bool is_valid = v4l2_fwht_validate_fmt(&v4l2_fwht_pixfmts[i],
-						       width_div, height_div,
-						       components_num, pixenc);
-		if (is_valid) {
-			if (start_idx == 0)
-				return v4l2_fwht_pixfmts + i;
-			start_idx--;
-		}
-	}
-	return NULL;
-}
-
-const struct v4l2_fwht_pixfmt_info *v4l2_fwht_find_pixfmt(u32 pixelformat)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(v4l2_fwht_pixfmts); i++)
-		if (v4l2_fwht_pixfmts[i].id == pixelformat)
-			return v4l2_fwht_pixfmts + i;
-	return NULL;
-}
-
-const struct v4l2_fwht_pixfmt_info *v4l2_fwht_get_pixfmt(u32 idx)
-{
-	if (idx >= ARRAY_SIZE(v4l2_fwht_pixfmts))
-		return NULL;
-	return v4l2_fwht_pixfmts + idx;
-}
-
-static int prepare_raw_frame(struct fwht_raw_frame *rf,
-			 const struct v4l2_fwht_pixfmt_info *info, u8 *buf,
-			 unsigned int size)
-{
-	rf->luma = buf;
-	rf->width_div = info->width_div;
-	rf->height_div = info->height_div;
-	rf->luma_alpha_step = info->luma_alpha_step;
-	rf->chroma_step = info->chroma_step;
-	rf->alpha = NULL;
-	rf->components_num = info->components_num;
-
-	/*
-	 * The buffer is NULL if it is the reference
-	 * frame of an I-frame in the stateless decoder
-	 */
-	if (!buf) {
-		rf->luma = NULL;
-		rf->cb = NULL;
-		rf->cr = NULL;
-		rf->alpha = NULL;
-		return 0;
-	}
-	switch (info->id) {
-	case V4L2_PIX_FMT_GREY:
-		rf->cb = NULL;
-		rf->cr = NULL;
-		break;
-	case V4L2_PIX_FMT_YUV420:
-		rf->cb = rf->luma + size;
-		rf->cr = rf->cb + size / 4;
-		break;
-	case V4L2_PIX_FMT_YVU420:
-		rf->cr = rf->luma + size;
-		rf->cb = rf->cr + size / 4;
-		break;
-	case V4L2_PIX_FMT_YUV422P:
-		rf->cb = rf->luma + size;
-		rf->cr = rf->cb + size / 2;
-		break;
-	case V4L2_PIX_FMT_NV12:
-	case V4L2_PIX_FMT_NV16:
-	case V4L2_PIX_FMT_NV24:
-		rf->cb = rf->luma + size;
-		rf->cr = rf->cb + 1;
-		break;
-	case V4L2_PIX_FMT_NV21:
-	case V4L2_PIX_FMT_NV61:
-	case V4L2_PIX_FMT_NV42:
-		rf->cr = rf->luma + size;
-		rf->cb = rf->cr + 1;
-		break;
-	case V4L2_PIX_FMT_YUYV:
-		rf->cb = rf->luma + 1;
-		rf->cr = rf->cb + 2;
-		break;
-	case V4L2_PIX_FMT_YVYU:
-		rf->cr = rf->luma + 1;
-		rf->cb = rf->cr + 2;
-		break;
-	case V4L2_PIX_FMT_UYVY:
-		rf->cb = rf->luma;
-		rf->cr = rf->cb + 2;
-		rf->luma++;
-		break;
-	case V4L2_PIX_FMT_VYUY:
-		rf->cr = rf->luma;
-		rf->cb = rf->cr + 2;
-		rf->luma++;
-		break;
-	case V4L2_PIX_FMT_RGB24:
-	case V4L2_PIX_FMT_HSV24:
-		rf->cr = rf->luma;
-		rf->cb = rf->cr + 2;
-		rf->luma++;
-		break;
-	case V4L2_PIX_FMT_BGR24:
-		rf->cb = rf->luma;
-		rf->cr = rf->cb + 2;
-		rf->luma++;
-		break;
-	case V4L2_PIX_FMT_RGB32:
-	case V4L2_PIX_FMT_XRGB32:
-	case V4L2_PIX_FMT_HSV32:
-	case V4L2_PIX_FMT_ARGB32:
-		rf->alpha = rf->luma;
-		rf->cr = rf->luma + 1;
-		rf->cb = rf->cr + 2;
-		rf->luma += 2;
-		break;
-	case V4L2_PIX_FMT_BGR32:
-	case V4L2_PIX_FMT_XBGR32:
-	case V4L2_PIX_FMT_ABGR32:
-		rf->cb = rf->luma;
-		rf->cr = rf->cb + 2;
-		rf->luma++;
-		rf->alpha = rf->cr + 1;
-		break;
-	case V4L2_PIX_FMT_BGRX32:
-	case V4L2_PIX_FMT_BGRA32:
-		rf->alpha = rf->luma;
-		rf->cb = rf->luma + 1;
-		rf->cr = rf->cb + 2;
-		rf->luma += 2;
-		break;
-	case V4L2_PIX_FMT_RGBX32:
-	case V4L2_PIX_FMT_RGBA32:
-		rf->alpha = rf->luma + 3;
-		rf->cr = rf->luma;
-		rf->cb = rf->cr + 2;
-		rf->luma++;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-int v4l2_fwht_encode(struct v4l2_fwht_state *state, u8 *p_in, u8 *p_out)
-{
-	unsigned int size = state->stride * state->coded_height;
-	unsigned int chroma_stride = state->stride;
-	const struct v4l2_fwht_pixfmt_info *info = state->info;
-	struct fwht_cframe_hdr *p_hdr;
-	struct fwht_cframe cf;
-	struct fwht_raw_frame rf;
-	u32 encoding;
-	u32 flags = 0;
-
-	if (!info)
-		return -EINVAL;
-
-	if (prepare_raw_frame(&rf, info, p_in, size))
-		return -EINVAL;
-
-	if (info->planes_num == 3)
-		chroma_stride /= 2;
-
-	if (info->id == V4L2_PIX_FMT_NV24 ||
-	    info->id == V4L2_PIX_FMT_NV42)
-		chroma_stride *= 2;
-
-	cf.i_frame_qp = state->i_frame_qp;
-	cf.p_frame_qp = state->p_frame_qp;
-	cf.rlc_data = (__be16 *)(p_out + sizeof(*p_hdr));
-
-	encoding = fwht_encode_frame(&rf, &state->ref_frame, &cf,
-				     !state->gop_cnt,
-				     state->gop_cnt == state->gop_size - 1,
-				     state->visible_width,
-				     state->visible_height,
-				     state->stride, chroma_stride);
-	if (!(encoding & FWHT_FRAME_PCODED))
-		state->gop_cnt = 0;
-	if (++state->gop_cnt >= state->gop_size)
-		state->gop_cnt = 0;
-
-	p_hdr = (struct fwht_cframe_hdr *)p_out;
-	p_hdr->magic1 = FWHT_MAGIC1;
-	p_hdr->magic2 = FWHT_MAGIC2;
-	p_hdr->version = htonl(FWHT_VERSION);
-	p_hdr->width = htonl(state->visible_width);
-	p_hdr->height = htonl(state->visible_height);
-	flags |= (info->components_num - 1) << FWHT_FL_COMPONENTS_NUM_OFFSET;
-	flags |= info->pixenc;
-	if (encoding & FWHT_LUMA_UNENCODED)
-		flags |= FWHT_FL_LUMA_IS_UNCOMPRESSED;
-	if (encoding & FWHT_CB_UNENCODED)
-		flags |= FWHT_FL_CB_IS_UNCOMPRESSED;
-	if (encoding & FWHT_CR_UNENCODED)
-		flags |= FWHT_FL_CR_IS_UNCOMPRESSED;
-	if (encoding & FWHT_ALPHA_UNENCODED)
-		flags |= FWHT_FL_ALPHA_IS_UNCOMPRESSED;
-	if (!(encoding & FWHT_FRAME_PCODED))
-		flags |= FWHT_FL_I_FRAME;
-	if (rf.height_div == 1)
-		flags |= FWHT_FL_CHROMA_FULL_HEIGHT;
-	if (rf.width_div == 1)
-		flags |= FWHT_FL_CHROMA_FULL_WIDTH;
-	p_hdr->flags = htonl(flags);
-	p_hdr->colorspace = htonl(state->colorspace);
-	p_hdr->xfer_func = htonl(state->xfer_func);
-	p_hdr->ycbcr_enc = htonl(state->ycbcr_enc);
-	p_hdr->quantization = htonl(state->quantization);
-	p_hdr->size = htonl(cf.size);
-	return cf.size + sizeof(*p_hdr);
-}
-
-int v4l2_fwht_decode(struct v4l2_fwht_state *state, u8 *p_in, u8 *p_out)
-{
-	u32 flags;
-	struct fwht_cframe cf;
-	unsigned int components_num = 3;
-	unsigned int version;
-	const struct v4l2_fwht_pixfmt_info *info;
-	unsigned int hdr_width_div, hdr_height_div;
-	struct fwht_raw_frame dst_rf;
-	unsigned int dst_chroma_stride = state->stride;
-	unsigned int ref_chroma_stride = state->ref_stride;
-	unsigned int dst_size = state->stride * state->coded_height;
-	unsigned int ref_size;
-
-	if (!state->info)
-		return -EINVAL;
-
-	info = state->info;
-
-	version = ntohl(state->header.version);
-	if (!version || version > FWHT_VERSION) {
-		pr_err("version %d is not supported, current version is %d\n",
-		       version, FWHT_VERSION);
-		return -EINVAL;
-	}
-
-	if (state->header.magic1 != FWHT_MAGIC1 ||
-	    state->header.magic2 != FWHT_MAGIC2)
-		return -EINVAL;
-
-	/* TODO: support resolution changes */
-	if (ntohl(state->header.width)  != state->visible_width ||
-	    ntohl(state->header.height) != state->visible_height)
-		return -EINVAL;
-
-	flags = ntohl(state->header.flags);
-
-	if (version >= 2) {
-		if ((flags & FWHT_FL_PIXENC_MSK) != info->pixenc)
-			return -EINVAL;
-		components_num = 1 + ((flags & FWHT_FL_COMPONENTS_NUM_MSK) >>
-				FWHT_FL_COMPONENTS_NUM_OFFSET);
-	}
-
-	if (components_num != info->components_num)
-		return -EINVAL;
-
-	state->colorspace = ntohl(state->header.colorspace);
-	state->xfer_func = ntohl(state->header.xfer_func);
-	state->ycbcr_enc = ntohl(state->header.ycbcr_enc);
-	state->quantization = ntohl(state->header.quantization);
-	cf.rlc_data = (__be16 *)p_in;
-	cf.size = ntohl(state->header.size);
-
-	hdr_width_div = (flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
-	hdr_height_div = (flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
-	if (hdr_width_div != info->width_div ||
-	    hdr_height_div != info->height_div)
-		return -EINVAL;
-
-	if (prepare_raw_frame(&dst_rf, info, p_out, dst_size))
-		return -EINVAL;
-	if (info->planes_num == 3) {
-		dst_chroma_stride /= 2;
-		ref_chroma_stride /= 2;
-	}
-	if (info->id == V4L2_PIX_FMT_NV24 ||
-	    info->id == V4L2_PIX_FMT_NV42) {
-		dst_chroma_stride *= 2;
-		ref_chroma_stride *= 2;
-	}
-
-
-	ref_size = state->ref_stride * state->coded_height;
-
-	if (prepare_raw_frame(&state->ref_frame, info, state->ref_frame.buf,
-			      ref_size))
-		return -EINVAL;
-
-	if (!fwht_decode_frame(&cf, flags, components_num,
-			state->visible_width, state->visible_height,
-			&state->ref_frame, state->ref_stride, ref_chroma_stride,
-			&dst_rf, state->stride, dst_chroma_stride))
-		return -EINVAL;
-	return 0;
-}
diff --git a/drivers/media/platform/vicodec/codec-v4l2-fwht.h b/drivers/media/platform/vicodec/codec-v4l2-fwht.h
deleted file mode 100644
index 1a0d2a9f931a..000000000000
--- a/drivers/media/platform/vicodec/codec-v4l2-fwht.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: LGPL-2.1 */
-/*
- * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef CODEC_V4L2_FWHT_H
-#define CODEC_V4L2_FWHT_H
-
-#include "codec-fwht.h"
-
-struct v4l2_fwht_pixfmt_info {
-	u32 id;
-	unsigned int bytesperline_mult;
-	unsigned int sizeimage_mult;
-	unsigned int sizeimage_div;
-	unsigned int luma_alpha_step;
-	unsigned int chroma_step;
-	/* Chroma plane subsampling */
-	unsigned int width_div;
-	unsigned int height_div;
-	unsigned int components_num;
-	unsigned int planes_num;
-	unsigned int pixenc;
-};
-
-struct v4l2_fwht_state {
-	const struct v4l2_fwht_pixfmt_info *info;
-	unsigned int visible_width;
-	unsigned int visible_height;
-	unsigned int coded_width;
-	unsigned int coded_height;
-	unsigned int stride;
-	unsigned int ref_stride;
-	unsigned int gop_size;
-	unsigned int gop_cnt;
-	u16 i_frame_qp;
-	u16 p_frame_qp;
-
-	enum v4l2_colorspace colorspace;
-	enum v4l2_ycbcr_encoding ycbcr_enc;
-	enum v4l2_xfer_func xfer_func;
-	enum v4l2_quantization quantization;
-
-	struct fwht_raw_frame ref_frame;
-	struct fwht_cframe_hdr header;
-	u8 *compressed_frame;
-	u64 ref_frame_ts;
-};
-
-const struct v4l2_fwht_pixfmt_info *v4l2_fwht_find_pixfmt(u32 pixelformat);
-const struct v4l2_fwht_pixfmt_info *v4l2_fwht_get_pixfmt(u32 idx);
-bool v4l2_fwht_validate_fmt(const struct v4l2_fwht_pixfmt_info *info,
-			    u32 width_div, u32 height_div, u32 components_num,
-			    u32 pixenc);
-const struct v4l2_fwht_pixfmt_info *v4l2_fwht_find_nth_fmt(u32 width_div,
-							  u32 height_div,
-							  u32 components_num,
-							  u32 pixenc,
-							  unsigned int start_idx);
-
-int v4l2_fwht_encode(struct v4l2_fwht_state *state, u8 *p_in, u8 *p_out);
-int v4l2_fwht_decode(struct v4l2_fwht_state *state, u8 *p_in, u8 *p_out);
-
-#endif
diff --git a/drivers/media/platform/vicodec/vicodec-core.c b/drivers/media/platform/vicodec/vicodec-core.c
deleted file mode 100644
index 30ced1c21387..000000000000
--- a/drivers/media/platform/vicodec/vicodec-core.c
+++ /dev/null
@@ -1,2238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * A virtual codec example device.
- *
- * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- *
- * This is a virtual codec device driver for testing the codec framework.
- * It simulates a device that uses memory buffers for both source and
- * destination and encodes or decodes the data.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-#include <linux/platform_device.h>
-#include <media/v4l2-mem2mem.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-event.h>
-#include <media/videobuf2-vmalloc.h>
-
-#include "codec-v4l2-fwht.h"
-
-MODULE_DESCRIPTION("Virtual codec device");
-MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
-MODULE_LICENSE("GPL v2");
-
-static bool multiplanar;
-module_param(multiplanar, bool, 0444);
-MODULE_PARM_DESC(multiplanar,
-		 " use multi-planar API instead of single-planar API");
-
-static unsigned int debug;
-module_param(debug, uint, 0644);
-MODULE_PARM_DESC(debug, " activates debug info");
-
-#define VICODEC_NAME		"vicodec"
-#define MAX_WIDTH		4096U
-#define MIN_WIDTH		640U
-#define MAX_HEIGHT		2160U
-#define MIN_HEIGHT		360U
-
-#define dprintk(dev, fmt, arg...) \
-	v4l2_dbg(1, debug, &dev->v4l2_dev, "%s: " fmt, __func__, ## arg)
-
-
-struct pixfmt_info {
-	u32 id;
-	unsigned int bytesperline_mult;
-	unsigned int sizeimage_mult;
-	unsigned int sizeimage_div;
-	unsigned int luma_step;
-	unsigned int chroma_step;
-	/* Chroma plane subsampling */
-	unsigned int width_div;
-	unsigned int height_div;
-};
-
-static const struct v4l2_fwht_pixfmt_info pixfmt_fwht = {
-	V4L2_PIX_FMT_FWHT, 0, 3, 1, 1, 1, 1, 1, 0, 1
-};
-
-static const struct v4l2_fwht_pixfmt_info pixfmt_stateless_fwht = {
-	V4L2_PIX_FMT_FWHT_STATELESS, 0, 3, 1, 1, 1, 1, 1, 0, 1
-};
-
-static void vicodec_dev_release(struct device *dev)
-{
-}
-
-static struct platform_device vicodec_pdev = {
-	.name		= VICODEC_NAME,
-	.dev.release	= vicodec_dev_release,
-};
-
-/* Per-queue, driver-specific private data */
-struct vicodec_q_data {
-	unsigned int		coded_width;
-	unsigned int		coded_height;
-	unsigned int		visible_width;
-	unsigned int		visible_height;
-	unsigned int		sizeimage;
-	unsigned int		vb2_sizeimage;
-	unsigned int		sequence;
-	const struct v4l2_fwht_pixfmt_info *info;
-};
-
-enum {
-	V4L2_M2M_SRC = 0,
-	V4L2_M2M_DST = 1,
-};
-
-struct vicodec_dev_instance {
-	struct video_device     vfd;
-	struct mutex            mutex;
-	spinlock_t              lock;
-	struct v4l2_m2m_dev     *m2m_dev;
-};
-
-struct vicodec_dev {
-	struct v4l2_device	v4l2_dev;
-	struct vicodec_dev_instance stateful_enc;
-	struct vicodec_dev_instance stateful_dec;
-	struct vicodec_dev_instance stateless_dec;
-#ifdef CONFIG_MEDIA_CONTROLLER
-	struct media_device	mdev;
-#endif
-
-};
-
-struct vicodec_ctx {
-	struct v4l2_fh		fh;
-	struct vicodec_dev	*dev;
-	bool			is_enc;
-	bool			is_stateless;
-	spinlock_t		*lock;
-
-	struct v4l2_ctrl_handler hdl;
-
-	/* Source and destination queue data */
-	struct vicodec_q_data   q_data[2];
-	struct v4l2_fwht_state	state;
-
-	u32			cur_buf_offset;
-	u32			comp_max_size;
-	u32			comp_size;
-	u32			header_size;
-	u32			comp_magic_cnt;
-	bool			comp_has_frame;
-	bool			comp_has_next_frame;
-	bool			first_source_change_sent;
-	bool			source_changed;
-};
-
-static const struct v4l2_event vicodec_eos_event = {
-	.type = V4L2_EVENT_EOS
-};
-
-static inline struct vicodec_ctx *file2ctx(struct file *file)
-{
-	return container_of(file->private_data, struct vicodec_ctx, fh);
-}
-
-static struct vicodec_q_data *get_q_data(struct vicodec_ctx *ctx,
-					 enum v4l2_buf_type type)
-{
-	switch (type) {
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		return &ctx->q_data[V4L2_M2M_SRC];
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
-		return &ctx->q_data[V4L2_M2M_DST];
-	default:
-		break;
-	}
-	return NULL;
-}
-
-static void copy_cap_to_ref(const u8 *cap, const struct v4l2_fwht_pixfmt_info *info,
-		struct v4l2_fwht_state *state)
-{
-	int plane_idx;
-	u8 *p_ref = state->ref_frame.buf;
-	unsigned int cap_stride = state->stride;
-	unsigned int ref_stride = state->ref_stride;
-
-	for (plane_idx = 0; plane_idx < info->planes_num; plane_idx++) {
-		int i;
-		unsigned int h_div = (plane_idx == 1 || plane_idx == 2) ?
-			info->height_div : 1;
-		const u8 *row_cap = cap;
-		u8 *row_ref = p_ref;
-
-		if (info->planes_num == 3 && plane_idx == 1) {
-			cap_stride /= 2;
-			ref_stride /= 2;
-		}
-
-		if (plane_idx == 1 &&
-		    (info->id == V4L2_PIX_FMT_NV24 ||
-		     info->id == V4L2_PIX_FMT_NV42)) {
-			cap_stride *= 2;
-			ref_stride *= 2;
-		}
-
-		for (i = 0; i < state->visible_height / h_div; i++) {
-			memcpy(row_ref, row_cap, ref_stride);
-			row_ref += ref_stride;
-			row_cap += cap_stride;
-		}
-		cap += cap_stride * (state->coded_height / h_div);
-		p_ref += ref_stride * (state->coded_height / h_div);
-	}
-}
-
-static bool validate_by_version(unsigned int flags, unsigned int version)
-{
-	if (!version || version > FWHT_VERSION)
-		return false;
-
-	if (version >= 2) {
-		unsigned int components_num = 1 +
-			((flags & FWHT_FL_COMPONENTS_NUM_MSK) >>
-			 FWHT_FL_COMPONENTS_NUM_OFFSET);
-		unsigned int pixenc = flags & FWHT_FL_PIXENC_MSK;
-
-		if (components_num == 0 || components_num > 4 || !pixenc)
-			return false;
-	}
-	return true;
-}
-
-static bool validate_stateless_params_flags(const struct v4l2_ctrl_fwht_params *params,
-					    const struct v4l2_fwht_pixfmt_info *cur_info)
-{
-	unsigned int width_div =
-		(params->flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
-	unsigned int height_div =
-		(params->flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
-	unsigned int components_num = 3;
-	unsigned int pixenc = 0;
-
-	if (params->version < 3)
-		return false;
-
-	components_num = 1 + ((params->flags & FWHT_FL_COMPONENTS_NUM_MSK) >>
-			      FWHT_FL_COMPONENTS_NUM_OFFSET);
-	pixenc = (params->flags & FWHT_FL_PIXENC_MSK);
-	if (v4l2_fwht_validate_fmt(cur_info, width_div, height_div,
-				    components_num, pixenc))
-		return true;
-	return false;
-}
-
-
-static void update_state_from_header(struct vicodec_ctx *ctx)
-{
-	const struct fwht_cframe_hdr *p_hdr = &ctx->state.header;
-
-	ctx->state.visible_width = ntohl(p_hdr->width);
-	ctx->state.visible_height = ntohl(p_hdr->height);
-	ctx->state.colorspace = ntohl(p_hdr->colorspace);
-	ctx->state.xfer_func = ntohl(p_hdr->xfer_func);
-	ctx->state.ycbcr_enc = ntohl(p_hdr->ycbcr_enc);
-	ctx->state.quantization = ntohl(p_hdr->quantization);
-}
-
-static int device_process(struct vicodec_ctx *ctx,
-			  struct vb2_v4l2_buffer *src_vb,
-			  struct vb2_v4l2_buffer *dst_vb)
-{
-	struct vicodec_dev *dev = ctx->dev;
-	struct v4l2_fwht_state *state = &ctx->state;
-	u8 *p_src, *p_dst;
-	int ret = 0;
-
-	if (ctx->is_enc || ctx->is_stateless)
-		p_src = vb2_plane_vaddr(&src_vb->vb2_buf, 0);
-	else
-		p_src = state->compressed_frame;
-
-	if (ctx->is_stateless) {
-		struct media_request *src_req = src_vb->vb2_buf.req_obj.req;
-
-		ret = v4l2_ctrl_request_setup(src_req, &ctx->hdl);
-		if (ret)
-			return ret;
-		update_state_from_header(ctx);
-
-		ctx->state.header.size =
-			htonl(vb2_get_plane_payload(&src_vb->vb2_buf, 0));
-		/*
-		 * set the reference buffer from the reference timestamp
-		 * only if this is a P-frame
-		 */
-		if (!(ntohl(ctx->state.header.flags) & FWHT_FL_I_FRAME)) {
-			struct vb2_buffer *ref_vb2_buf;
-			int ref_buf_idx;
-			struct vb2_queue *vq_cap =
-				v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
-						V4L2_BUF_TYPE_VIDEO_CAPTURE);
-
-			ref_buf_idx = vb2_find_timestamp(vq_cap,
-							 ctx->state.ref_frame_ts, 0);
-			if (ref_buf_idx < 0)
-				return -EINVAL;
-
-			ref_vb2_buf = vq_cap->bufs[ref_buf_idx];
-			if (ref_vb2_buf->state == VB2_BUF_STATE_ERROR)
-				ret = -EINVAL;
-			ctx->state.ref_frame.buf =
-				vb2_plane_vaddr(ref_vb2_buf, 0);
-		} else {
-			ctx->state.ref_frame.buf = NULL;
-		}
-	}
-	p_dst = vb2_plane_vaddr(&dst_vb->vb2_buf, 0);
-	if (!p_src || !p_dst) {
-		v4l2_err(&dev->v4l2_dev,
-			 "Acquiring kernel pointers to buffers failed\n");
-		return -EFAULT;
-	}
-
-	if (ctx->is_enc) {
-		struct vicodec_q_data *q_src;
-		int comp_sz_or_errcode;
-
-		q_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
-		state->info = q_src->info;
-		comp_sz_or_errcode = v4l2_fwht_encode(state, p_src, p_dst);
-		if (comp_sz_or_errcode < 0)
-			return comp_sz_or_errcode;
-		vb2_set_plane_payload(&dst_vb->vb2_buf, 0, comp_sz_or_errcode);
-	} else {
-		struct vicodec_q_data *q_dst;
-		unsigned int comp_frame_size = ntohl(ctx->state.header.size);
-
-		q_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
-		if (comp_frame_size > ctx->comp_max_size)
-			return -EINVAL;
-		state->info = q_dst->info;
-		ret = v4l2_fwht_decode(state, p_src, p_dst);
-		if (ret < 0)
-			return ret;
-		if (!ctx->is_stateless)
-			copy_cap_to_ref(p_dst, ctx->state.info, &ctx->state);
-
-		vb2_set_plane_payload(&dst_vb->vb2_buf, 0, q_dst->sizeimage);
-		if (ntohl(ctx->state.header.flags) & FWHT_FL_I_FRAME)
-			dst_vb->flags |= V4L2_BUF_FLAG_KEYFRAME;
-		else
-			dst_vb->flags |= V4L2_BUF_FLAG_PFRAME;
-	}
-	return ret;
-}
-
-/*
- * mem2mem callbacks
- */
-static enum vb2_buffer_state get_next_header(struct vicodec_ctx *ctx,
-					     u8 **pp, u32 sz)
-{
-	static const u8 magic[] = {
-		0x4f, 0x4f, 0x4f, 0x4f, 0xff, 0xff, 0xff, 0xff
-	};
-	u8 *p = *pp;
-	u32 state;
-	u8 *header = (u8 *)&ctx->state.header;
-
-	state = VB2_BUF_STATE_DONE;
-
-	if (!ctx->header_size) {
-		state = VB2_BUF_STATE_ERROR;
-		for (; p < *pp + sz; p++) {
-			u32 copy;
-
-			p = memchr(p, magic[ctx->comp_magic_cnt],
-				   *pp + sz - p);
-			if (!p) {
-				ctx->comp_magic_cnt = 0;
-				p = *pp + sz;
-				break;
-			}
-			copy = sizeof(magic) - ctx->comp_magic_cnt;
-			if (*pp + sz - p < copy)
-				copy = *pp + sz - p;
-
-			memcpy(header + ctx->comp_magic_cnt, p, copy);
-			ctx->comp_magic_cnt += copy;
-			if (!memcmp(header, magic, ctx->comp_magic_cnt)) {
-				p += copy;
-				state = VB2_BUF_STATE_DONE;
-				break;
-			}
-			ctx->comp_magic_cnt = 0;
-		}
-		if (ctx->comp_magic_cnt < sizeof(magic)) {
-			*pp = p;
-			return state;
-		}
-		ctx->header_size = sizeof(magic);
-	}
-
-	if (ctx->header_size < sizeof(struct fwht_cframe_hdr)) {
-		u32 copy = sizeof(struct fwht_cframe_hdr) - ctx->header_size;
-
-		if (*pp + sz - p < copy)
-			copy = *pp + sz - p;
-
-		memcpy(header + ctx->header_size, p, copy);
-		p += copy;
-		ctx->header_size += copy;
-	}
-	*pp = p;
-	return state;
-}
-
-/* device_run() - prepares and starts the device */
-static void device_run(void *priv)
-{
-	struct vicodec_ctx *ctx = priv;
-	struct vicodec_dev *dev = ctx->dev;
-	struct vb2_v4l2_buffer *src_buf, *dst_buf;
-	struct vicodec_q_data *q_src, *q_dst;
-	u32 state;
-	struct media_request *src_req;
-
-	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
-	dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
-	src_req = src_buf->vb2_buf.req_obj.req;
-
-	q_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
-	q_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
-
-	state = VB2_BUF_STATE_DONE;
-	if (device_process(ctx, src_buf, dst_buf))
-		state = VB2_BUF_STATE_ERROR;
-	else
-		dst_buf->sequence = q_dst->sequence++;
-	dst_buf->flags &= ~V4L2_BUF_FLAG_LAST;
-	v4l2_m2m_buf_copy_metadata(src_buf, dst_buf, false);
-
-	spin_lock(ctx->lock);
-	if (!ctx->comp_has_next_frame &&
-	    v4l2_m2m_is_last_draining_src_buf(ctx->fh.m2m_ctx, src_buf)) {
-		dst_buf->flags |= V4L2_BUF_FLAG_LAST;
-		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
-		v4l2_m2m_mark_stopped(ctx->fh.m2m_ctx);
-	}
-	if (ctx->is_enc || ctx->is_stateless) {
-		src_buf->sequence = q_src->sequence++;
-		src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
-		v4l2_m2m_buf_done(src_buf, state);
-	} else if (vb2_get_plane_payload(&src_buf->vb2_buf, 0) == ctx->cur_buf_offset) {
-		src_buf->sequence = q_src->sequence++;
-		src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
-		v4l2_m2m_buf_done(src_buf, state);
-		ctx->cur_buf_offset = 0;
-		ctx->comp_has_next_frame = false;
-	}
-	v4l2_m2m_buf_done(dst_buf, state);
-
-	ctx->comp_size = 0;
-	ctx->header_size = 0;
-	ctx->comp_magic_cnt = 0;
-	ctx->comp_has_frame = false;
-	spin_unlock(ctx->lock);
-	if (ctx->is_stateless && src_req)
-		v4l2_ctrl_request_complete(src_req, &ctx->hdl);
-
-	if (ctx->is_enc)
-		v4l2_m2m_job_finish(dev->stateful_enc.m2m_dev, ctx->fh.m2m_ctx);
-	else if (ctx->is_stateless)
-		v4l2_m2m_job_finish(dev->stateless_dec.m2m_dev,
-				    ctx->fh.m2m_ctx);
-	else
-		v4l2_m2m_job_finish(dev->stateful_dec.m2m_dev, ctx->fh.m2m_ctx);
-}
-
-static void job_remove_src_buf(struct vicodec_ctx *ctx, u32 state)
-{
-	struct vb2_v4l2_buffer *src_buf;
-	struct vicodec_q_data *q_src;
-
-	q_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
-	spin_lock(ctx->lock);
-	src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
-	src_buf->sequence = q_src->sequence++;
-	v4l2_m2m_buf_done(src_buf, state);
-	ctx->cur_buf_offset = 0;
-	spin_unlock(ctx->lock);
-}
-
-static const struct v4l2_fwht_pixfmt_info *
-info_from_header(const struct fwht_cframe_hdr *p_hdr)
-{
-	unsigned int flags = ntohl(p_hdr->flags);
-	unsigned int width_div = (flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
-	unsigned int height_div = (flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
-	unsigned int components_num = 3;
-	unsigned int pixenc = 0;
-	unsigned int version = ntohl(p_hdr->version);
-
-	if (version >= 2) {
-		components_num = 1 + ((flags & FWHT_FL_COMPONENTS_NUM_MSK) >>
-				FWHT_FL_COMPONENTS_NUM_OFFSET);
-		pixenc = (flags & FWHT_FL_PIXENC_MSK);
-	}
-	return v4l2_fwht_find_nth_fmt(width_div, height_div,
-				     components_num, pixenc, 0);
-}
-
-static bool is_header_valid(const struct fwht_cframe_hdr *p_hdr)
-{
-	const struct v4l2_fwht_pixfmt_info *info;
-	unsigned int w = ntohl(p_hdr->width);
-	unsigned int h = ntohl(p_hdr->height);
-	unsigned int version = ntohl(p_hdr->version);
-	unsigned int flags = ntohl(p_hdr->flags);
-
-	if (w < MIN_WIDTH || w > MAX_WIDTH || h < MIN_HEIGHT || h > MAX_HEIGHT)
-		return false;
-
-	if (!validate_by_version(flags, version))
-		return false;
-
-	info = info_from_header(p_hdr);
-	if (!info)
-		return false;
-	return true;
-}
-
-static void update_capture_data_from_header(struct vicodec_ctx *ctx)
-{
-	struct vicodec_q_data *q_dst = get_q_data(ctx,
-						  V4L2_BUF_TYPE_VIDEO_CAPTURE);
-	const struct fwht_cframe_hdr *p_hdr = &ctx->state.header;
-	const struct v4l2_fwht_pixfmt_info *info = info_from_header(p_hdr);
-	unsigned int flags = ntohl(p_hdr->flags);
-	unsigned int hdr_width_div = (flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
-	unsigned int hdr_height_div = (flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
-
-	/*
-	 * This function should not be used by a stateless codec since
-	 * it changes values in q_data that are not request specific
-	 */
-	WARN_ON(ctx->is_stateless);
-
-	q_dst->info = info;
-	q_dst->visible_width = ntohl(p_hdr->width);
-	q_dst->visible_height = ntohl(p_hdr->height);
-	q_dst->coded_width = vic_round_dim(q_dst->visible_width, hdr_width_div);
-	q_dst->coded_height = vic_round_dim(q_dst->visible_height,
-					    hdr_height_div);
-
-	q_dst->sizeimage = q_dst->coded_width * q_dst->coded_height *
-		q_dst->info->sizeimage_mult / q_dst->info->sizeimage_div;
-	ctx->state.colorspace = ntohl(p_hdr->colorspace);
-
-	ctx->state.xfer_func = ntohl(p_hdr->xfer_func);
-	ctx->state.ycbcr_enc = ntohl(p_hdr->ycbcr_enc);
-	ctx->state.quantization = ntohl(p_hdr->quantization);
-}
-
-static void set_last_buffer(struct vb2_v4l2_buffer *dst_buf,
-			    const struct vb2_v4l2_buffer *src_buf,
-			    struct vicodec_ctx *ctx)
-{
-	struct vicodec_q_data *q_dst = get_q_data(ctx,
-						  V4L2_BUF_TYPE_VIDEO_CAPTURE);
-
-	vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
-	dst_buf->sequence = q_dst->sequence++;
-
-	v4l2_m2m_buf_copy_metadata(src_buf, dst_buf, !ctx->is_enc);
-	dst_buf->flags |= V4L2_BUF_FLAG_LAST;
-	v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
-}
-
-static int job_ready(void *priv)
-{
-	static const u8 magic[] = {
-		0x4f, 0x4f, 0x4f, 0x4f, 0xff, 0xff, 0xff, 0xff
-	};
-	struct vicodec_ctx *ctx = priv;
-	struct vb2_v4l2_buffer *src_buf;
-	u8 *p_src;
-	u8 *p;
-	u32 sz;
-	u32 state;
-	struct vicodec_q_data *q_dst = get_q_data(ctx,
-						  V4L2_BUF_TYPE_VIDEO_CAPTURE);
-	unsigned int flags;
-	unsigned int hdr_width_div;
-	unsigned int hdr_height_div;
-	unsigned int max_to_copy;
-	unsigned int comp_frame_size;
-
-	if (ctx->source_changed)
-		return 0;
-	if (ctx->is_stateless || ctx->is_enc || ctx->comp_has_frame)
-		return 1;
-
-restart:
-	ctx->comp_has_next_frame = false;
-	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
-	if (!src_buf)
-		return 0;
-	p_src = vb2_plane_vaddr(&src_buf->vb2_buf, 0);
-	sz = vb2_get_plane_payload(&src_buf->vb2_buf, 0);
-	p = p_src + ctx->cur_buf_offset;
-
-	state = VB2_BUF_STATE_DONE;
-
-	if (ctx->header_size < sizeof(struct fwht_cframe_hdr)) {
-		state = get_next_header(ctx, &p, p_src + sz - p);
-		if (ctx->header_size < sizeof(struct fwht_cframe_hdr)) {
-			if (v4l2_m2m_is_last_draining_src_buf(ctx->fh.m2m_ctx,
-							      src_buf))
-				return 1;
-			job_remove_src_buf(ctx, state);
-			goto restart;
-		}
-	}
-
-	comp_frame_size = ntohl(ctx->state.header.size);
-
-	/*
-	 * The current scanned frame might be the first frame of a new
-	 * resolution so its size might be larger than ctx->comp_max_size.
-	 * In that case it is copied up to the current buffer capacity and
-	 * the copy will continue after allocating new large enough buffer
-	 * when restreaming
-	 */
-	max_to_copy = min(comp_frame_size, ctx->comp_max_size);
-
-	if (ctx->comp_size < max_to_copy) {
-		u32 copy = max_to_copy - ctx->comp_size;
-
-		if (copy > p_src + sz - p)
-			copy = p_src + sz - p;
-
-		memcpy(ctx->state.compressed_frame + ctx->comp_size,
-		       p, copy);
-		p += copy;
-		ctx->comp_size += copy;
-		if (ctx->comp_size < max_to_copy) {
-			if (v4l2_m2m_is_last_draining_src_buf(ctx->fh.m2m_ctx,
-							      src_buf))
-				return 1;
-			job_remove_src_buf(ctx, state);
-			goto restart;
-		}
-	}
-	ctx->cur_buf_offset = p - p_src;
-	if (ctx->comp_size == comp_frame_size)
-		ctx->comp_has_frame = true;
-	ctx->comp_has_next_frame = false;
-	if (ctx->comp_has_frame && sz - ctx->cur_buf_offset >=
-			sizeof(struct fwht_cframe_hdr)) {
-		struct fwht_cframe_hdr *p_hdr = (struct fwht_cframe_hdr *)p;
-		u32 frame_size = ntohl(p_hdr->size);
-		u32 remaining = sz - ctx->cur_buf_offset - sizeof(*p_hdr);
-
-		if (!memcmp(p, magic, sizeof(magic)))
-			ctx->comp_has_next_frame = remaining >= frame_size;
-	}
-	/*
-	 * if the header is invalid the device_run will just drop the frame
-	 * with an error
-	 */
-	if (!is_header_valid(&ctx->state.header) && ctx->comp_has_frame)
-		return 1;
-	flags = ntohl(ctx->state.header.flags);
-	hdr_width_div = (flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
-	hdr_height_div = (flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
-
-	if (ntohl(ctx->state.header.width) != q_dst->visible_width ||
-	    ntohl(ctx->state.header.height) != q_dst->visible_height ||
-	    !q_dst->info ||
-	    hdr_width_div != q_dst->info->width_div ||
-	    hdr_height_div != q_dst->info->height_div) {
-		static const struct v4l2_event rs_event = {
-			.type = V4L2_EVENT_SOURCE_CHANGE,
-			.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
-		};
-
-		struct vb2_v4l2_buffer *dst_buf =
-			v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
-
-		update_capture_data_from_header(ctx);
-		v4l2_event_queue_fh(&ctx->fh, &rs_event);
-		set_last_buffer(dst_buf, src_buf, ctx);
-		ctx->source_changed = true;
-		return 0;
-	}
-	return 1;
-}
-
-/*
- * video ioctls
- */
-
-static const struct v4l2_fwht_pixfmt_info *find_fmt(u32 fmt)
-{
-	const struct v4l2_fwht_pixfmt_info *info =
-		v4l2_fwht_find_pixfmt(fmt);
-
-	if (!info)
-		info = v4l2_fwht_get_pixfmt(0);
-	return info;
-}
-
-static int vidioc_querycap(struct file *file, void *priv,
-			   struct v4l2_capability *cap)
-{
-	strscpy(cap->driver, VICODEC_NAME, sizeof(cap->driver));
-	strscpy(cap->card, VICODEC_NAME, sizeof(cap->card));
-	snprintf(cap->bus_info, sizeof(cap->bus_info),
-			"platform:%s", VICODEC_NAME);
-	return 0;
-}
-
-static int enum_fmt(struct v4l2_fmtdesc *f, struct vicodec_ctx *ctx,
-		    bool is_out)
-{
-	bool is_uncomp = (ctx->is_enc && is_out) || (!ctx->is_enc && !is_out);
-
-	if (V4L2_TYPE_IS_MULTIPLANAR(f->type) && !multiplanar)
-		return -EINVAL;
-	if (!V4L2_TYPE_IS_MULTIPLANAR(f->type) && multiplanar)
-		return -EINVAL;
-
-	if (is_uncomp) {
-		const struct v4l2_fwht_pixfmt_info *info =
-					get_q_data(ctx, f->type)->info;
-
-		if (ctx->is_enc ||
-		    !vb2_is_streaming(&ctx->fh.m2m_ctx->cap_q_ctx.q))
-			info = v4l2_fwht_get_pixfmt(f->index);
-		else
-			info = v4l2_fwht_find_nth_fmt(info->width_div,
-						     info->height_div,
-						     info->components_num,
-						     info->pixenc,
-						     f->index);
-		if (!info)
-			return -EINVAL;
-		f->pixelformat = info->id;
-	} else {
-		if (f->index)
-			return -EINVAL;
-		f->pixelformat = ctx->is_stateless ?
-			V4L2_PIX_FMT_FWHT_STATELESS : V4L2_PIX_FMT_FWHT;
-		if (!ctx->is_enc && !ctx->is_stateless)
-			f->flags = V4L2_FMT_FLAG_DYN_RESOLUTION |
-				   V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM;
-	}
-	return 0;
-}
-
-static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
-				   struct v4l2_fmtdesc *f)
-{
-	struct vicodec_ctx *ctx = file2ctx(file);
-
-	return enum_fmt(f, ctx, false);
-}
-
-static int vidioc_enum_fmt_vid_out(struct file *file, void *priv,
-				   struct v4l2_fmtdesc *f)
-{
-	struct vicodec_ctx *ctx = file2ctx(file);
-
-	return enum_fmt(f, ctx, true);
-}
-
-static int vidioc_g_fmt(struct vicodec_ctx *ctx, struct v4l2_format *f)
-{
-	struct vb2_queue *vq;
-	struct vicodec_q_data *q_data;
-	struct v4l2_pix_format_mplane *pix_mp;
-	struct v4l2_pix_format *pix;
-	const struct v4l2_fwht_pixfmt_info *info;
-
-	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
-	if (!vq)
-		return -EINVAL;
-
-	q_data = get_q_data(ctx, f->type);
-	info = q_data->info;
-
-	switch (f->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		if (multiplanar)
-			return -EINVAL;
-		pix = &f->fmt.pix;
-		pix->width = q_data->coded_width;
-		pix->height = q_data->coded_height;
-		pix->field = V4L2_FIELD_NONE;
-		pix->pixelformat = info->id;
-		pix->bytesperline = q_data->coded_width *
-					info->bytesperline_mult;
-		pix->sizeimage = q_data->sizeimage;
-		pix->colorspace = ctx->state.colorspace;
-		pix->xfer_func = ctx->state.xfer_func;
-		pix->ycbcr_enc = ctx->state.ycbcr_enc;
-		pix->quantization = ctx->state.quantization;
-		break;
-
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		if (!multiplanar)
-			return -EINVAL;
-		pix_mp = &f->fmt.pix_mp;
-		pix_mp->width = q_data->coded_width;
-		pix_mp->height = q_data->coded_height;
-		pix_mp->field = V4L2_FIELD_NONE;
-		pix_mp->pixelformat = info->id;
-		pix_mp->num_planes = 1;
-		pix_mp->plane_fmt[0].bytesperline =
-				q_data->coded_width * info->bytesperline_mult;
-		pix_mp->plane_fmt[0].sizeimage = q_data->sizeimage;
-		pix_mp->colorspace = ctx->state.colorspace;
-		pix_mp->xfer_func = ctx->state.xfer_func;
-		pix_mp->ycbcr_enc = ctx->state.ycbcr_enc;
-		pix_mp->quantization = ctx->state.quantization;
-		memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
-		memset(pix_mp->plane_fmt[0].reserved, 0,
-		       sizeof(pix_mp->plane_fmt[0].reserved));
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int vidioc_g_fmt_vid_out(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	return vidioc_g_fmt(file2ctx(file), f);
-}
-
-static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	return vidioc_g_fmt(file2ctx(file), f);
-}
-
-static int vidioc_try_fmt(struct vicodec_ctx *ctx, struct v4l2_format *f)
-{
-	struct v4l2_pix_format_mplane *pix_mp;
-	struct v4l2_pix_format *pix;
-	struct v4l2_plane_pix_format *plane;
-	const struct v4l2_fwht_pixfmt_info *info = ctx->is_stateless ?
-		&pixfmt_stateless_fwht : &pixfmt_fwht;
-
-	switch (f->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		pix = &f->fmt.pix;
-		if (pix->pixelformat != V4L2_PIX_FMT_FWHT &&
-		    pix->pixelformat != V4L2_PIX_FMT_FWHT_STATELESS)
-			info = find_fmt(pix->pixelformat);
-
-		pix->width = clamp(pix->width, MIN_WIDTH, MAX_WIDTH);
-		pix->width = vic_round_dim(pix->width, info->width_div);
-
-		pix->height = clamp(pix->height, MIN_HEIGHT, MAX_HEIGHT);
-		pix->height = vic_round_dim(pix->height, info->height_div);
-
-		pix->field = V4L2_FIELD_NONE;
-		pix->bytesperline =
-			pix->width * info->bytesperline_mult;
-		pix->sizeimage = pix->width * pix->height *
-			info->sizeimage_mult / info->sizeimage_div;
-		if (pix->pixelformat == V4L2_PIX_FMT_FWHT)
-			pix->sizeimage += sizeof(struct fwht_cframe_hdr);
-		break;
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		pix_mp = &f->fmt.pix_mp;
-		plane = pix_mp->plane_fmt;
-		if (pix_mp->pixelformat != V4L2_PIX_FMT_FWHT &&
-		    pix_mp->pixelformat != V4L2_PIX_FMT_FWHT_STATELESS)
-			info = find_fmt(pix_mp->pixelformat);
-		pix_mp->num_planes = 1;
-
-		pix_mp->width = clamp(pix_mp->width, MIN_WIDTH, MAX_WIDTH);
-		pix_mp->width = vic_round_dim(pix_mp->width, info->width_div);
-
-		pix_mp->height = clamp(pix_mp->height, MIN_HEIGHT, MAX_HEIGHT);
-		pix_mp->height = vic_round_dim(pix_mp->height,
-					       info->height_div);
-
-		pix_mp->field = V4L2_FIELD_NONE;
-		plane->bytesperline =
-			pix_mp->width * info->bytesperline_mult;
-		plane->sizeimage = pix_mp->width * pix_mp->height *
-			info->sizeimage_mult / info->sizeimage_div;
-		if (pix_mp->pixelformat == V4L2_PIX_FMT_FWHT)
-			plane->sizeimage += sizeof(struct fwht_cframe_hdr);
-		memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
-		memset(plane->reserved, 0, sizeof(plane->reserved));
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct vicodec_ctx *ctx = file2ctx(file);
-	struct v4l2_pix_format_mplane *pix_mp;
-	struct v4l2_pix_format *pix;
-
-	switch (f->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (multiplanar)
-			return -EINVAL;
-		pix = &f->fmt.pix;
-		pix->pixelformat = ctx->is_enc ? V4L2_PIX_FMT_FWHT :
-				   find_fmt(f->fmt.pix.pixelformat)->id;
-		pix->colorspace = ctx->state.colorspace;
-		pix->xfer_func = ctx->state.xfer_func;
-		pix->ycbcr_enc = ctx->state.ycbcr_enc;
-		pix->quantization = ctx->state.quantization;
-		break;
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
-		if (!multiplanar)
-			return -EINVAL;
-		pix_mp = &f->fmt.pix_mp;
-		pix_mp->pixelformat = ctx->is_enc ? V4L2_PIX_FMT_FWHT :
-				      find_fmt(pix_mp->pixelformat)->id;
-		pix_mp->colorspace = ctx->state.colorspace;
-		pix_mp->xfer_func = ctx->state.xfer_func;
-		pix_mp->ycbcr_enc = ctx->state.ycbcr_enc;
-		pix_mp->quantization = ctx->state.quantization;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return vidioc_try_fmt(ctx, f);
-}
-
-static int vidioc_try_fmt_vid_out(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct vicodec_ctx *ctx = file2ctx(file);
-	struct v4l2_pix_format_mplane *pix_mp;
-	struct v4l2_pix_format *pix;
-
-	switch (f->type) {
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		if (multiplanar)
-			return -EINVAL;
-		pix = &f->fmt.pix;
-		if (ctx->is_enc)
-			pix->pixelformat = find_fmt(pix->pixelformat)->id;
-		else if (ctx->is_stateless)
-			pix->pixelformat = V4L2_PIX_FMT_FWHT_STATELESS;
-		else
-			pix->pixelformat = V4L2_PIX_FMT_FWHT;
-		if (!pix->colorspace)
-			pix->colorspace = V4L2_COLORSPACE_REC709;
-		break;
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		if (!multiplanar)
-			return -EINVAL;
-		pix_mp = &f->fmt.pix_mp;
-		if (ctx->is_enc)
-			pix_mp->pixelformat = find_fmt(pix_mp->pixelformat)->id;
-		else if (ctx->is_stateless)
-			pix_mp->pixelformat = V4L2_PIX_FMT_FWHT_STATELESS;
-		else
-			pix_mp->pixelformat = V4L2_PIX_FMT_FWHT;
-		if (!pix_mp->colorspace)
-			pix_mp->colorspace = V4L2_COLORSPACE_REC709;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return vidioc_try_fmt(ctx, f);
-}
-
-static int vidioc_s_fmt(struct vicodec_ctx *ctx, struct v4l2_format *f)
-{
-	struct vicodec_q_data *q_data;
-	struct vb2_queue *vq;
-	bool fmt_changed = true;
-	struct v4l2_pix_format_mplane *pix_mp;
-	struct v4l2_pix_format *pix;
-
-	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
-	if (!vq)
-		return -EINVAL;
-
-	q_data = get_q_data(ctx, f->type);
-	if (!q_data)
-		return -EINVAL;
-
-	switch (f->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		pix = &f->fmt.pix;
-		if (ctx->is_enc && V4L2_TYPE_IS_OUTPUT(f->type))
-			fmt_changed =
-				!q_data->info ||
-				q_data->info->id != pix->pixelformat ||
-				q_data->coded_width != pix->width ||
-				q_data->coded_height != pix->height;
-
-		if (vb2_is_busy(vq) && fmt_changed)
-			return -EBUSY;
-
-		if (pix->pixelformat == V4L2_PIX_FMT_FWHT)
-			q_data->info = &pixfmt_fwht;
-		else if (pix->pixelformat == V4L2_PIX_FMT_FWHT_STATELESS)
-			q_data->info = &pixfmt_stateless_fwht;
-		else
-			q_data->info = find_fmt(pix->pixelformat);
-		q_data->coded_width = pix->width;
-		q_data->coded_height = pix->height;
-		q_data->sizeimage = pix->sizeimage;
-		break;
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		pix_mp = &f->fmt.pix_mp;
-		if (ctx->is_enc && V4L2_TYPE_IS_OUTPUT(f->type))
-			fmt_changed =
-				!q_data->info ||
-				q_data->info->id != pix_mp->pixelformat ||
-				q_data->coded_width != pix_mp->width ||
-				q_data->coded_height != pix_mp->height;
-
-		if (vb2_is_busy(vq) && fmt_changed)
-			return -EBUSY;
-
-		if (pix_mp->pixelformat == V4L2_PIX_FMT_FWHT)
-			q_data->info = &pixfmt_fwht;
-		else if (pix_mp->pixelformat == V4L2_PIX_FMT_FWHT_STATELESS)
-			q_data->info = &pixfmt_stateless_fwht;
-		else
-			q_data->info = find_fmt(pix_mp->pixelformat);
-		q_data->coded_width = pix_mp->width;
-		q_data->coded_height = pix_mp->height;
-		q_data->sizeimage = pix_mp->plane_fmt[0].sizeimage;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dprintk(ctx->dev,
-		"Setting format for type %d, coded wxh: %dx%d, fourcc: 0x%08x\n",
-		f->type, q_data->coded_width, q_data->coded_height,
-		q_data->info->id);
-
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	int ret;
-
-	ret = vidioc_try_fmt_vid_cap(file, priv, f);
-	if (ret)
-		return ret;
-
-	return vidioc_s_fmt(file2ctx(file), f);
-}
-
-static int vidioc_s_fmt_vid_out(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct vicodec_ctx *ctx = file2ctx(file);
-	struct vicodec_q_data *q_data;
-	struct vicodec_q_data *q_data_cap;
-	struct v4l2_pix_format *pix;
-	struct v4l2_pix_format_mplane *pix_mp;
-	u32 coded_w = 0, coded_h = 0;
-	unsigned int size = 0;
-	int ret;
-
-	q_data = get_q_data(ctx, f->type);
-	q_data_cap = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
-
-	ret = vidioc_try_fmt_vid_out(file, priv, f);
-	if (ret)
-		return ret;
-
-	if (ctx->is_enc) {
-		struct vb2_queue *vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
-		struct vb2_queue *vq_cap = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
-							   V4L2_BUF_TYPE_VIDEO_CAPTURE);
-		const struct v4l2_fwht_pixfmt_info *info = ctx->is_stateless ?
-			&pixfmt_stateless_fwht : &pixfmt_fwht;
-
-		if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
-			coded_w = f->fmt.pix.width;
-			coded_h = f->fmt.pix.height;
-		} else {
-			coded_w = f->fmt.pix_mp.width;
-			coded_h = f->fmt.pix_mp.height;
-		}
-		if (vb2_is_busy(vq) && (coded_w != q_data->coded_width ||
-					coded_h != q_data->coded_height))
-			return -EBUSY;
-		size = coded_w * coded_h *
-			info->sizeimage_mult / info->sizeimage_div;
-		if (!ctx->is_stateless)
-			size += sizeof(struct fwht_cframe_hdr);
-
-		if (vb2_is_busy(vq_cap) && size > q_data_cap->sizeimage)
-			return -EBUSY;
-	}
-
-	ret = vidioc_s_fmt(file2ctx(file), f);
-	if (!ret) {
-		if (ctx->is_enc) {
-			q_data->visible_width = coded_w;
-			q_data->visible_height = coded_h;
-			q_data_cap->coded_width = coded_w;
-			q_data_cap->coded_height = coded_h;
-			q_data_cap->sizeimage = size;
-		}
-
-		switch (f->type) {
-		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-			pix = &f->fmt.pix;
-			ctx->state.colorspace = pix->colorspace;
-			ctx->state.xfer_func = pix->xfer_func;
-			ctx->state.ycbcr_enc = pix->ycbcr_enc;
-			ctx->state.quantization = pix->quantization;
-			break;
-		case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-			pix_mp = &f->fmt.pix_mp;
-			ctx->state.colorspace = pix_mp->colorspace;
-			ctx->state.xfer_func = pix_mp->xfer_func;
-			ctx->state.ycbcr_enc = pix_mp->ycbcr_enc;
-			ctx->state.quantization = pix_mp->quantization;
-			break;
-		default:
-			break;
-		}
-	}
-	return ret;
-}
-
-static int vidioc_g_selection(struct file *file, void *priv,
-			      struct v4l2_selection *s)
-{
-	struct vicodec_ctx *ctx = file2ctx(file);
-	struct vicodec_q_data *q_data;
-
-	q_data = get_q_data(ctx, s->type);
-	if (!q_data)
-		return -EINVAL;
-	/*
-	 * encoder supports only cropping on the OUTPUT buffer
-	 * decoder supports only composing on the CAPTURE buffer
-	 */
-	if (ctx->is_enc && s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
-		switch (s->target) {
-		case V4L2_SEL_TGT_CROP:
-			s->r.left = 0;
-			s->r.top = 0;
-			s->r.width = q_data->visible_width;
-			s->r.height = q_data->visible_height;
-			return 0;
-		case V4L2_SEL_TGT_CROP_DEFAULT:
-		case V4L2_SEL_TGT_CROP_BOUNDS:
-			s->r.left = 0;
-			s->r.top = 0;
-			s->r.width = q_data->coded_width;
-			s->r.height = q_data->coded_height;
-			return 0;
-		}
-	} else if (!ctx->is_enc && s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		switch (s->target) {
-		case V4L2_SEL_TGT_COMPOSE:
-			s->r.left = 0;
-			s->r.top = 0;
-			s->r.width = q_data->visible_width;
-			s->r.height = q_data->visible_height;
-			return 0;
-		case V4L2_SEL_TGT_COMPOSE_DEFAULT:
-		case V4L2_SEL_TGT_COMPOSE_BOUNDS:
-			s->r.left = 0;
-			s->r.top = 0;
-			s->r.width = q_data->coded_width;
-			s->r.height = q_data->coded_height;
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static int vidioc_s_selection(struct file *file, void *priv,
-			      struct v4l2_selection *s)
-{
-	struct vicodec_ctx *ctx = file2ctx(file);
-	struct vicodec_q_data *q_data;
-
-	if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
-		return -EINVAL;
-
-	q_data = get_q_data(ctx, s->type);
-	if (!q_data)
-		return -EINVAL;
-
-	if (!ctx->is_enc || s->target != V4L2_SEL_TGT_CROP)
-		return -EINVAL;
-
-	s->r.left = 0;
-	s->r.top = 0;
-	q_data->visible_width = clamp(s->r.width, MIN_WIDTH,
-				      q_data->coded_width);
-	s->r.width = q_data->visible_width;
-	q_data->visible_height = clamp(s->r.height, MIN_HEIGHT,
-				       q_data->coded_height);
-	s->r.height = q_data->visible_height;
-	return 0;
-}
-
-static int vicodec_encoder_cmd(struct file *file, void *fh,
-			    struct v4l2_encoder_cmd *ec)
-{
-	struct vicodec_ctx *ctx = file2ctx(file);
-	int ret;
-
-	ret = v4l2_m2m_ioctl_try_encoder_cmd(file, fh, ec);
-	if (ret < 0)
-		return ret;
-
-	if (!vb2_is_streaming(&ctx->fh.m2m_ctx->cap_q_ctx.q) ||
-	    !vb2_is_streaming(&ctx->fh.m2m_ctx->out_q_ctx.q))
-		return 0;
-
-	ret = v4l2_m2m_ioctl_encoder_cmd(file, fh, ec);
-	if (ret < 0)
-		return ret;
-
-	if (ec->cmd == V4L2_ENC_CMD_STOP &&
-	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
-		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
-
-	if (ec->cmd == V4L2_ENC_CMD_START &&
-	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
-		vb2_clear_last_buffer_dequeued(&ctx->fh.m2m_ctx->cap_q_ctx.q);
-
-	return 0;
-}
-
-static int vicodec_decoder_cmd(struct file *file, void *fh,
-			    struct v4l2_decoder_cmd *dc)
-{
-	struct vicodec_ctx *ctx = file2ctx(file);
-	int ret;
-
-	ret = v4l2_m2m_ioctl_try_decoder_cmd(file, fh, dc);
-	if (ret < 0)
-		return ret;
-
-	if (!vb2_is_streaming(&ctx->fh.m2m_ctx->cap_q_ctx.q) ||
-	    !vb2_is_streaming(&ctx->fh.m2m_ctx->out_q_ctx.q))
-		return 0;
-
-	ret = v4l2_m2m_ioctl_decoder_cmd(file, fh, dc);
-	if (ret < 0)
-		return ret;
-
-	if (dc->cmd == V4L2_DEC_CMD_STOP &&
-	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
-		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
-
-	if (dc->cmd == V4L2_DEC_CMD_START &&
-	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
-		vb2_clear_last_buffer_dequeued(&ctx->fh.m2m_ctx->cap_q_ctx.q);
-
-	return 0;
-}
-
-static int vicodec_enum_framesizes(struct file *file, void *fh,
-				   struct v4l2_frmsizeenum *fsize)
-{
-	switch (fsize->pixel_format) {
-	case V4L2_PIX_FMT_FWHT_STATELESS:
-		break;
-	case V4L2_PIX_FMT_FWHT:
-		break;
-	default:
-		if (find_fmt(fsize->pixel_format)->id == fsize->pixel_format)
-			break;
-		return -EINVAL;
-	}
-
-	if (fsize->index)
-		return -EINVAL;
-
-	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
-
-	fsize->stepwise.min_width = MIN_WIDTH;
-	fsize->stepwise.max_width = MAX_WIDTH;
-	fsize->stepwise.step_width = 8;
-	fsize->stepwise.min_height = MIN_HEIGHT;
-	fsize->stepwise.max_height = MAX_HEIGHT;
-	fsize->stepwise.step_height = 8;
-
-	return 0;
-}
-
-static int vicodec_subscribe_event(struct v4l2_fh *fh,
-				const struct v4l2_event_subscription *sub)
-{
-	struct vicodec_ctx *ctx = container_of(fh, struct vicodec_ctx, fh);
-
-	switch (sub->type) {
-	case V4L2_EVENT_SOURCE_CHANGE:
-		if (ctx->is_enc)
-			return -EINVAL;
-		/* fall through */
-	case V4L2_EVENT_EOS:
-		if (ctx->is_stateless)
-			return -EINVAL;
-		return v4l2_event_subscribe(fh, sub, 0, NULL);
-	default:
-		return v4l2_ctrl_subscribe_event(fh, sub);
-	}
-}
-
-static const struct v4l2_ioctl_ops vicodec_ioctl_ops = {
-	.vidioc_querycap	= vidioc_querycap,
-
-	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap	= vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap	= vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap	= vidioc_s_fmt_vid_cap,
-
-	.vidioc_g_fmt_vid_cap_mplane	= vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap_mplane	= vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap_mplane	= vidioc_s_fmt_vid_cap,
-
-	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out,
-	.vidioc_g_fmt_vid_out	= vidioc_g_fmt_vid_out,
-	.vidioc_try_fmt_vid_out	= vidioc_try_fmt_vid_out,
-	.vidioc_s_fmt_vid_out	= vidioc_s_fmt_vid_out,
-
-	.vidioc_g_fmt_vid_out_mplane	= vidioc_g_fmt_vid_out,
-	.vidioc_try_fmt_vid_out_mplane	= vidioc_try_fmt_vid_out,
-	.vidioc_s_fmt_vid_out_mplane	= vidioc_s_fmt_vid_out,
-
-	.vidioc_reqbufs		= v4l2_m2m_ioctl_reqbufs,
-	.vidioc_querybuf	= v4l2_m2m_ioctl_querybuf,
-	.vidioc_qbuf		= v4l2_m2m_ioctl_qbuf,
-	.vidioc_dqbuf		= v4l2_m2m_ioctl_dqbuf,
-	.vidioc_prepare_buf	= v4l2_m2m_ioctl_prepare_buf,
-	.vidioc_create_bufs	= v4l2_m2m_ioctl_create_bufs,
-	.vidioc_expbuf		= v4l2_m2m_ioctl_expbuf,
-
-	.vidioc_streamon	= v4l2_m2m_ioctl_streamon,
-	.vidioc_streamoff	= v4l2_m2m_ioctl_streamoff,
-
-	.vidioc_g_selection	= vidioc_g_selection,
-	.vidioc_s_selection	= vidioc_s_selection,
-
-	.vidioc_try_encoder_cmd	= v4l2_m2m_ioctl_try_encoder_cmd,
-	.vidioc_encoder_cmd	= vicodec_encoder_cmd,
-	.vidioc_try_decoder_cmd	= v4l2_m2m_ioctl_try_decoder_cmd,
-	.vidioc_decoder_cmd	= vicodec_decoder_cmd,
-	.vidioc_enum_framesizes = vicodec_enum_framesizes,
-
-	.vidioc_subscribe_event = vicodec_subscribe_event,
-	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-};
-
-
-/*
- * Queue operations
- */
-
-static int vicodec_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-			       unsigned int *nplanes, unsigned int sizes[],
-			       struct device *alloc_devs[])
-{
-	struct vicodec_ctx *ctx = vb2_get_drv_priv(vq);
-	struct vicodec_q_data *q_data = get_q_data(ctx, vq->type);
-	unsigned int size = q_data->sizeimage;
-
-	if (*nplanes)
-		return sizes[0] < size ? -EINVAL : 0;
-
-	*nplanes = 1;
-	sizes[0] = size;
-	q_data->vb2_sizeimage = size;
-	return 0;
-}
-
-static int vicodec_buf_out_validate(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-
-	vbuf->field = V4L2_FIELD_NONE;
-	return 0;
-}
-
-static int vicodec_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vicodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
-	struct vicodec_q_data *q_data;
-
-	dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type);
-
-	q_data = get_q_data(ctx, vb->vb2_queue->type);
-	if (V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) {
-		if (vbuf->field == V4L2_FIELD_ANY)
-			vbuf->field = V4L2_FIELD_NONE;
-		if (vbuf->field != V4L2_FIELD_NONE) {
-			dprintk(ctx->dev, "%s field isn't supported\n",
-					__func__);
-			return -EINVAL;
-		}
-	}
-
-	if (vb2_plane_size(vb, 0) < q_data->vb2_sizeimage) {
-		dprintk(ctx->dev,
-			"%s data will not fit into plane (%lu < %lu)\n",
-			__func__, vb2_plane_size(vb, 0),
-			(long)q_data->vb2_sizeimage);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void vicodec_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vicodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
-	unsigned int sz = vb2_get_plane_payload(&vbuf->vb2_buf, 0);
-	u8 *p_src = vb2_plane_vaddr(&vbuf->vb2_buf, 0);
-	u8 *p = p_src;
-	struct vb2_queue *vq_out = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
-						   V4L2_BUF_TYPE_VIDEO_OUTPUT);
-	struct vb2_queue *vq_cap = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
-						   V4L2_BUF_TYPE_VIDEO_CAPTURE);
-	bool header_valid = false;
-	static const struct v4l2_event rs_event = {
-		.type = V4L2_EVENT_SOURCE_CHANGE,
-		.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
-	};
-
-	if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type) &&
-	    vb2_is_streaming(vb->vb2_queue) &&
-	    v4l2_m2m_dst_buf_is_last(ctx->fh.m2m_ctx)) {
-		unsigned int i;
-
-		for (i = 0; i < vb->num_planes; i++)
-			vb->planes[i].bytesused = 0;
-
-		vbuf->field = V4L2_FIELD_NONE;
-		vbuf->sequence =
-			get_q_data(ctx, vb->vb2_queue->type)->sequence++;
-
-		v4l2_m2m_last_buffer_done(ctx->fh.m2m_ctx, vbuf);
-		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
-		return;
-	}
-
-	/* buf_queue handles only the first source change event */
-	if (ctx->first_source_change_sent) {
-		v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
-		return;
-	}
-
-	/*
-	 * if both queues are streaming, the source change event is
-	 * handled in job_ready
-	 */
-	if (vb2_is_streaming(vq_cap) && vb2_is_streaming(vq_out)) {
-		v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
-		return;
-	}
-
-	/*
-	 * source change event is relevant only for the stateful decoder
-	 * in the compressed stream
-	 */
-	if (ctx->is_stateless || ctx->is_enc ||
-	    !V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) {
-		v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
-		return;
-	}
-
-	do {
-		enum vb2_buffer_state state =
-			get_next_header(ctx, &p, p_src + sz - p);
-
-		if (ctx->header_size < sizeof(struct fwht_cframe_hdr)) {
-			v4l2_m2m_buf_done(vbuf, state);
-			return;
-		}
-		header_valid = is_header_valid(&ctx->state.header);
-		/*
-		 * p points right after the end of the header in the
-		 * buffer. If the header is invalid we set p to point
-		 * to the next byte after the start of the header
-		 */
-		if (!header_valid) {
-			p = p - sizeof(struct fwht_cframe_hdr) + 1;
-			if (p < p_src)
-				p = p_src;
-			ctx->header_size = 0;
-			ctx->comp_magic_cnt = 0;
-		}
-
-	} while (!header_valid);
-
-	ctx->cur_buf_offset = p - p_src;
-	update_capture_data_from_header(ctx);
-	ctx->first_source_change_sent = true;
-	v4l2_event_queue_fh(&ctx->fh, &rs_event);
-	v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
-}
-
-static void vicodec_return_bufs(struct vb2_queue *q, u32 state)
-{
-	struct vicodec_ctx *ctx = vb2_get_drv_priv(q);
-	struct vb2_v4l2_buffer *vbuf;
-
-	for (;;) {
-		if (V4L2_TYPE_IS_OUTPUT(q->type))
-			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
-		else
-			vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
-		if (vbuf == NULL)
-			return;
-		v4l2_ctrl_request_complete(vbuf->vb2_buf.req_obj.req,
-					   &ctx->hdl);
-		spin_lock(ctx->lock);
-		v4l2_m2m_buf_done(vbuf, state);
-		spin_unlock(ctx->lock);
-	}
-}
-
-static unsigned int total_frame_size(struct vicodec_q_data *q_data)
-{
-	unsigned int size;
-	unsigned int chroma_div;
-
-	if (!q_data->info) {
-		WARN_ON(1);
-		return 0;
-	}
-	size = q_data->coded_width * q_data->coded_height;
-	chroma_div = q_data->info->width_div * q_data->info->height_div;
-
-	if (q_data->info->components_num == 4)
-		return 2 * size + 2 * (size / chroma_div);
-	else if (q_data->info->components_num == 3)
-		return size + 2 * (size / chroma_div);
-	return size;
-}
-
-static int vicodec_start_streaming(struct vb2_queue *q,
-				   unsigned int count)
-{
-	struct vicodec_ctx *ctx = vb2_get_drv_priv(q);
-	struct vicodec_q_data *q_data = get_q_data(ctx, q->type);
-	struct v4l2_fwht_state *state = &ctx->state;
-	const struct v4l2_fwht_pixfmt_info *info = q_data->info;
-	unsigned int size = q_data->coded_width * q_data->coded_height;
-	unsigned int chroma_div;
-	unsigned int total_planes_size;
-	u8 *new_comp_frame = NULL;
-
-	chroma_div = info->width_div * info->height_div;
-	q_data->sequence = 0;
-
-	v4l2_m2m_update_start_streaming_state(ctx->fh.m2m_ctx, q);
-
-	state->gop_cnt = 0;
-
-	if ((V4L2_TYPE_IS_OUTPUT(q->type) && !ctx->is_enc) ||
-	    (!V4L2_TYPE_IS_OUTPUT(q->type) && ctx->is_enc))
-		return 0;
-
-	if (info->id == V4L2_PIX_FMT_FWHT ||
-	    info->id == V4L2_PIX_FMT_FWHT_STATELESS) {
-		vicodec_return_bufs(q, VB2_BUF_STATE_QUEUED);
-		return -EINVAL;
-	}
-	total_planes_size = total_frame_size(q_data);
-	ctx->comp_max_size = total_planes_size;
-
-	state->visible_width = q_data->visible_width;
-	state->visible_height = q_data->visible_height;
-	state->coded_width = q_data->coded_width;
-	state->coded_height = q_data->coded_height;
-	state->stride = q_data->coded_width *
-				info->bytesperline_mult;
-
-	if (ctx->is_stateless) {
-		state->ref_stride = state->stride;
-		return 0;
-	}
-	state->ref_stride = q_data->coded_width * info->luma_alpha_step;
-
-	state->ref_frame.buf = kvmalloc(total_planes_size, GFP_KERNEL);
-	state->ref_frame.luma = state->ref_frame.buf;
-	new_comp_frame = kvmalloc(ctx->comp_max_size, GFP_KERNEL);
-
-	if (!state->ref_frame.luma || !new_comp_frame) {
-		kvfree(state->ref_frame.luma);
-		kvfree(new_comp_frame);
-		vicodec_return_bufs(q, VB2_BUF_STATE_QUEUED);
-		return -ENOMEM;
-	}
-	/*
-	 * if state->compressed_frame was already allocated then
-	 * it contain data of the first frame of the new resolution
-	 */
-	if (state->compressed_frame) {
-		if (ctx->comp_size > ctx->comp_max_size)
-			ctx->comp_size = ctx->comp_max_size;
-
-		memcpy(new_comp_frame,
-		       state->compressed_frame, ctx->comp_size);
-	}
-
-	kvfree(state->compressed_frame);
-	state->compressed_frame = new_comp_frame;
-
-	if (info->components_num < 3) {
-		state->ref_frame.cb = NULL;
-		state->ref_frame.cr = NULL;
-		state->ref_frame.alpha = NULL;
-		return 0;
-	}
-
-	state->ref_frame.cb = state->ref_frame.luma + size;
-	state->ref_frame.cr = state->ref_frame.cb + size / chroma_div;
-
-	if (info->components_num == 4)
-		state->ref_frame.alpha =
-			state->ref_frame.cr + size / chroma_div;
-	else
-		state->ref_frame.alpha = NULL;
-
-	return 0;
-}
-
-static void vicodec_stop_streaming(struct vb2_queue *q)
-{
-	struct vicodec_ctx *ctx = vb2_get_drv_priv(q);
-
-	vicodec_return_bufs(q, VB2_BUF_STATE_ERROR);
-
-	v4l2_m2m_update_stop_streaming_state(ctx->fh.m2m_ctx, q);
-
-	if (V4L2_TYPE_IS_OUTPUT(q->type) &&
-	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
-		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
-
-	if (!ctx->is_enc && V4L2_TYPE_IS_OUTPUT(q->type))
-		ctx->first_source_change_sent = false;
-
-	if ((!V4L2_TYPE_IS_OUTPUT(q->type) && !ctx->is_enc) ||
-	    (V4L2_TYPE_IS_OUTPUT(q->type) && ctx->is_enc)) {
-		if (!ctx->is_stateless)
-			kvfree(ctx->state.ref_frame.buf);
-		ctx->state.ref_frame.buf = NULL;
-		ctx->state.ref_frame.luma = NULL;
-		ctx->comp_max_size = 0;
-		ctx->source_changed = false;
-	}
-	if (V4L2_TYPE_IS_OUTPUT(q->type) && !ctx->is_enc) {
-		ctx->cur_buf_offset = 0;
-		ctx->comp_size = 0;
-		ctx->header_size = 0;
-		ctx->comp_magic_cnt = 0;
-		ctx->comp_has_frame = 0;
-		ctx->comp_has_next_frame = 0;
-	}
-}
-
-static void vicodec_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vicodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->hdl);
-}
-
-
-static const struct vb2_ops vicodec_qops = {
-	.queue_setup		= vicodec_queue_setup,
-	.buf_out_validate	= vicodec_buf_out_validate,
-	.buf_prepare		= vicodec_buf_prepare,
-	.buf_queue		= vicodec_buf_queue,
-	.buf_request_complete	= vicodec_buf_request_complete,
-	.start_streaming	= vicodec_start_streaming,
-	.stop_streaming		= vicodec_stop_streaming,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
-};
-
-static int queue_init(void *priv, struct vb2_queue *src_vq,
-		      struct vb2_queue *dst_vq)
-{
-	struct vicodec_ctx *ctx = priv;
-	int ret;
-
-	src_vq->type = (multiplanar ?
-			V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :
-			V4L2_BUF_TYPE_VIDEO_OUTPUT);
-	src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
-	src_vq->drv_priv = ctx;
-	src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
-	src_vq->ops = &vicodec_qops;
-	src_vq->mem_ops = &vb2_vmalloc_memops;
-	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
-	if (ctx->is_enc)
-		src_vq->lock = &ctx->dev->stateful_enc.mutex;
-	else if (ctx->is_stateless)
-		src_vq->lock = &ctx->dev->stateless_dec.mutex;
-	else
-		src_vq->lock = &ctx->dev->stateful_dec.mutex;
-	src_vq->supports_requests = ctx->is_stateless;
-	src_vq->requires_requests = ctx->is_stateless;
-	ret = vb2_queue_init(src_vq);
-	if (ret)
-		return ret;
-
-	dst_vq->type = (multiplanar ?
-			V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :
-			V4L2_BUF_TYPE_VIDEO_CAPTURE);
-	dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
-	dst_vq->drv_priv = ctx;
-	dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
-	dst_vq->ops = &vicodec_qops;
-	dst_vq->mem_ops = &vb2_vmalloc_memops;
-	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
-	dst_vq->lock = src_vq->lock;
-
-	return vb2_queue_init(dst_vq);
-}
-
-static int vicodec_try_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vicodec_ctx *ctx = container_of(ctrl->handler,
-			struct vicodec_ctx, hdl);
-	const struct v4l2_ctrl_fwht_params *params;
-	struct vicodec_q_data *q_dst = get_q_data(ctx,
-			V4L2_BUF_TYPE_VIDEO_CAPTURE);
-
-	switch (ctrl->id) {
-	case V4L2_CID_MPEG_VIDEO_FWHT_PARAMS:
-		if (!q_dst->info)
-			return -EINVAL;
-		params = ctrl->p_new.p_fwht_params;
-		if (params->width > q_dst->coded_width ||
-		    params->width < MIN_WIDTH ||
-		    params->height > q_dst->coded_height ||
-		    params->height < MIN_HEIGHT)
-			return -EINVAL;
-		if (!validate_by_version(params->flags, params->version))
-			return -EINVAL;
-		if (!validate_stateless_params_flags(params, q_dst->info))
-			return -EINVAL;
-		return 0;
-	default:
-		return 0;
-	}
-	return 0;
-}
-
-static void update_header_from_stateless_params(struct vicodec_ctx *ctx,
-						const struct v4l2_ctrl_fwht_params *params)
-{
-	struct fwht_cframe_hdr *p_hdr = &ctx->state.header;
-
-	p_hdr->magic1 = FWHT_MAGIC1;
-	p_hdr->magic2 = FWHT_MAGIC2;
-	p_hdr->version = htonl(params->version);
-	p_hdr->width = htonl(params->width);
-	p_hdr->height = htonl(params->height);
-	p_hdr->flags = htonl(params->flags);
-	p_hdr->colorspace = htonl(params->colorspace);
-	p_hdr->xfer_func = htonl(params->xfer_func);
-	p_hdr->ycbcr_enc = htonl(params->ycbcr_enc);
-	p_hdr->quantization = htonl(params->quantization);
-}
-
-static int vicodec_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vicodec_ctx *ctx = container_of(ctrl->handler,
-					       struct vicodec_ctx, hdl);
-	const struct v4l2_ctrl_fwht_params *params;
-
-	switch (ctrl->id) {
-	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
-		ctx->state.gop_size = ctrl->val;
-		return 0;
-	case V4L2_CID_FWHT_I_FRAME_QP:
-		ctx->state.i_frame_qp = ctrl->val;
-		return 0;
-	case V4L2_CID_FWHT_P_FRAME_QP:
-		ctx->state.p_frame_qp = ctrl->val;
-		return 0;
-	case V4L2_CID_MPEG_VIDEO_FWHT_PARAMS:
-		params = ctrl->p_new.p_fwht_params;
-		update_header_from_stateless_params(ctx, params);
-		ctx->state.ref_frame_ts = params->backward_ref_ts;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static const struct v4l2_ctrl_ops vicodec_ctrl_ops = {
-	.s_ctrl = vicodec_s_ctrl,
-	.try_ctrl = vicodec_try_ctrl,
-};
-
-static const struct v4l2_ctrl_config vicodec_ctrl_stateless_state = {
-	.ops		= &vicodec_ctrl_ops,
-	.id		= V4L2_CID_MPEG_VIDEO_FWHT_PARAMS,
-	.elem_size      = sizeof(struct v4l2_ctrl_fwht_params),
-};
-
-/*
- * File operations
- */
-static int vicodec_open(struct file *file)
-{
-	const struct v4l2_fwht_pixfmt_info *info = v4l2_fwht_get_pixfmt(0);
-	struct video_device *vfd = video_devdata(file);
-	struct vicodec_dev *dev = video_drvdata(file);
-	struct vicodec_ctx *ctx = NULL;
-	struct v4l2_ctrl_handler *hdl;
-	unsigned int raw_size;
-	unsigned int comp_size;
-	int rc = 0;
-
-	if (mutex_lock_interruptible(vfd->lock))
-		return -ERESTARTSYS;
-	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
-	if (!ctx) {
-		rc = -ENOMEM;
-		goto open_unlock;
-	}
-
-	if (vfd == &dev->stateful_enc.vfd)
-		ctx->is_enc = true;
-	else if (vfd == &dev->stateless_dec.vfd)
-		ctx->is_stateless = true;
-
-	v4l2_fh_init(&ctx->fh, video_devdata(file));
-	file->private_data = &ctx->fh;
-	ctx->dev = dev;
-	hdl = &ctx->hdl;
-	v4l2_ctrl_handler_init(hdl, 5);
-	v4l2_ctrl_new_std(hdl, &vicodec_ctrl_ops, V4L2_CID_MPEG_VIDEO_GOP_SIZE,
-			  1, 16, 1, 10);
-	v4l2_ctrl_new_std(hdl, &vicodec_ctrl_ops, V4L2_CID_FWHT_I_FRAME_QP,
-			  1, 31, 1, 20);
-	v4l2_ctrl_new_std(hdl, &vicodec_ctrl_ops, V4L2_CID_FWHT_P_FRAME_QP,
-			  1, 31, 1, 20);
-	if (ctx->is_enc)
-		v4l2_ctrl_new_std(hdl, &vicodec_ctrl_ops,
-				  V4L2_CID_MIN_BUFFERS_FOR_OUTPUT, 1, 1, 1, 1);
-	if (ctx->is_stateless)
-		v4l2_ctrl_new_custom(hdl, &vicodec_ctrl_stateless_state, NULL);
-	if (hdl->error) {
-		rc = hdl->error;
-		v4l2_ctrl_handler_free(hdl);
-		kfree(ctx);
-		goto open_unlock;
-	}
-	ctx->fh.ctrl_handler = hdl;
-	v4l2_ctrl_handler_setup(hdl);
-
-	if (ctx->is_enc)
-		ctx->q_data[V4L2_M2M_SRC].info = info;
-	else if (ctx->is_stateless)
-		ctx->q_data[V4L2_M2M_SRC].info = &pixfmt_stateless_fwht;
-	else
-		ctx->q_data[V4L2_M2M_SRC].info = &pixfmt_fwht;
-	ctx->q_data[V4L2_M2M_SRC].coded_width = 1280;
-	ctx->q_data[V4L2_M2M_SRC].coded_height = 720;
-	ctx->q_data[V4L2_M2M_SRC].visible_width = 1280;
-	ctx->q_data[V4L2_M2M_SRC].visible_height = 720;
-	raw_size = 1280 * 720 * info->sizeimage_mult / info->sizeimage_div;
-	comp_size = 1280 * 720 * pixfmt_fwht.sizeimage_mult /
-				 pixfmt_fwht.sizeimage_div;
-	if (ctx->is_enc)
-		ctx->q_data[V4L2_M2M_SRC].sizeimage = raw_size;
-	else if (ctx->is_stateless)
-		ctx->q_data[V4L2_M2M_SRC].sizeimage = comp_size;
-	else
-		ctx->q_data[V4L2_M2M_SRC].sizeimage =
-			comp_size + sizeof(struct fwht_cframe_hdr);
-	ctx->q_data[V4L2_M2M_DST] = ctx->q_data[V4L2_M2M_SRC];
-	if (ctx->is_enc) {
-		ctx->q_data[V4L2_M2M_DST].info = &pixfmt_fwht;
-		ctx->q_data[V4L2_M2M_DST].sizeimage =
-			comp_size + sizeof(struct fwht_cframe_hdr);
-	} else {
-		ctx->q_data[V4L2_M2M_DST].info = info;
-		ctx->q_data[V4L2_M2M_DST].sizeimage = raw_size;
-	}
-
-	ctx->state.colorspace = V4L2_COLORSPACE_REC709;
-
-	if (ctx->is_enc) {
-		ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->stateful_enc.m2m_dev,
-						    ctx, &queue_init);
-		ctx->lock = &dev->stateful_enc.lock;
-	} else if (ctx->is_stateless) {
-		ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->stateless_dec.m2m_dev,
-						    ctx, &queue_init);
-		ctx->lock = &dev->stateless_dec.lock;
-	} else {
-		ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->stateful_dec.m2m_dev,
-						    ctx, &queue_init);
-		ctx->lock = &dev->stateful_dec.lock;
-	}
-
-	if (IS_ERR(ctx->fh.m2m_ctx)) {
-		rc = PTR_ERR(ctx->fh.m2m_ctx);
-
-		v4l2_ctrl_handler_free(hdl);
-		v4l2_fh_exit(&ctx->fh);
-		kfree(ctx);
-		goto open_unlock;
-	}
-
-	v4l2_fh_add(&ctx->fh);
-
-open_unlock:
-	mutex_unlock(vfd->lock);
-	return rc;
-}
-
-static int vicodec_release(struct file *file)
-{
-	struct video_device *vfd = video_devdata(file);
-	struct vicodec_ctx *ctx = file2ctx(file);
-
-	mutex_lock(vfd->lock);
-	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
-	mutex_unlock(vfd->lock);
-	v4l2_fh_del(&ctx->fh);
-	v4l2_fh_exit(&ctx->fh);
-	v4l2_ctrl_handler_free(&ctx->hdl);
-	kvfree(ctx->state.compressed_frame);
-	kfree(ctx);
-
-	return 0;
-}
-
-static int vicodec_request_validate(struct media_request *req)
-{
-	struct media_request_object *obj;
-	struct v4l2_ctrl_handler *parent_hdl, *hdl;
-	struct vicodec_ctx *ctx = NULL;
-	struct v4l2_ctrl *ctrl;
-	unsigned int count;
-
-	list_for_each_entry(obj, &req->objects, list) {
-		struct vb2_buffer *vb;
-
-		if (vb2_request_object_is_buffer(obj)) {
-			vb = container_of(obj, struct vb2_buffer, req_obj);
-			ctx = vb2_get_drv_priv(vb->vb2_queue);
-
-			break;
-		}
-	}
-
-	if (!ctx) {
-		pr_err("No buffer was provided with the request\n");
-		return -ENOENT;
-	}
-
-	count = vb2_request_buffer_cnt(req);
-	if (!count) {
-		v4l2_info(&ctx->dev->v4l2_dev,
-			  "No buffer was provided with the request\n");
-		return -ENOENT;
-	} else if (count > 1) {
-		v4l2_info(&ctx->dev->v4l2_dev,
-			  "More than one buffer was provided with the request\n");
-		return -EINVAL;
-	}
-
-	parent_hdl = &ctx->hdl;
-
-	hdl = v4l2_ctrl_request_hdl_find(req, parent_hdl);
-	if (!hdl) {
-		v4l2_info(&ctx->dev->v4l2_dev, "Missing codec control\n");
-		return -ENOENT;
-	}
-	ctrl = v4l2_ctrl_request_hdl_ctrl_find(hdl,
-					       vicodec_ctrl_stateless_state.id);
-	if (!ctrl) {
-		v4l2_info(&ctx->dev->v4l2_dev,
-			  "Missing required codec control\n");
-		return -ENOENT;
-	}
-
-	return vb2_request_validate(req);
-}
-
-static const struct v4l2_file_operations vicodec_fops = {
-	.owner		= THIS_MODULE,
-	.open		= vicodec_open,
-	.release	= vicodec_release,
-	.poll		= v4l2_m2m_fop_poll,
-	.unlocked_ioctl	= video_ioctl2,
-	.mmap		= v4l2_m2m_fop_mmap,
-};
-
-static const struct video_device vicodec_videodev = {
-	.name		= VICODEC_NAME,
-	.vfl_dir	= VFL_DIR_M2M,
-	.fops		= &vicodec_fops,
-	.ioctl_ops	= &vicodec_ioctl_ops,
-	.minor		= -1,
-	.release	= video_device_release_empty,
-};
-
-static const struct media_device_ops vicodec_m2m_media_ops = {
-	.req_validate	= vicodec_request_validate,
-	.req_queue	= v4l2_m2m_request_queue,
-};
-
-static const struct v4l2_m2m_ops m2m_ops = {
-	.device_run	= device_run,
-	.job_ready	= job_ready,
-};
-
-static int register_instance(struct vicodec_dev *dev,
-			     struct vicodec_dev_instance *dev_instance,
-			     const char *name, bool is_enc)
-{
-	struct video_device *vfd;
-	int ret;
-
-	spin_lock_init(&dev_instance->lock);
-	mutex_init(&dev_instance->mutex);
-	dev_instance->m2m_dev = v4l2_m2m_init(&m2m_ops);
-	if (IS_ERR(dev_instance->m2m_dev)) {
-		v4l2_err(&dev->v4l2_dev, "Failed to init vicodec enc device\n");
-		return PTR_ERR(dev_instance->m2m_dev);
-	}
-
-	dev_instance->vfd = vicodec_videodev;
-	vfd = &dev_instance->vfd;
-	vfd->lock = &dev_instance->mutex;
-	vfd->v4l2_dev = &dev->v4l2_dev;
-	strscpy(vfd->name, name, sizeof(vfd->name));
-	vfd->device_caps = V4L2_CAP_STREAMING |
-		(multiplanar ? V4L2_CAP_VIDEO_M2M_MPLANE : V4L2_CAP_VIDEO_M2M);
-	if (is_enc) {
-		v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD);
-		v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD);
-	} else {
-		v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD);
-		v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD);
-	}
-	video_set_drvdata(vfd, dev);
-
-	ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
-	if (ret) {
-		v4l2_err(&dev->v4l2_dev, "Failed to register video device '%s'\n", name);
-		v4l2_m2m_release(dev_instance->m2m_dev);
-		return ret;
-	}
-	v4l2_info(&dev->v4l2_dev, "Device '%s' registered as /dev/video%d\n",
-		  name, vfd->num);
-	return 0;
-}
-
-static void vicodec_v4l2_dev_release(struct v4l2_device *v4l2_dev)
-{
-	struct vicodec_dev *dev = container_of(v4l2_dev, struct vicodec_dev, v4l2_dev);
-
-	v4l2_device_unregister(&dev->v4l2_dev);
-	v4l2_m2m_release(dev->stateful_enc.m2m_dev);
-	v4l2_m2m_release(dev->stateful_dec.m2m_dev);
-	v4l2_m2m_release(dev->stateless_dec.m2m_dev);
-#ifdef CONFIG_MEDIA_CONTROLLER
-	media_device_cleanup(&dev->mdev);
-#endif
-	kfree(dev);
-}
-
-static int vicodec_probe(struct platform_device *pdev)
-{
-	struct vicodec_dev *dev;
-	int ret;
-
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
-	if (ret)
-		goto free_dev;
-
-	dev->v4l2_dev.release = vicodec_v4l2_dev_release;
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-	dev->mdev.dev = &pdev->dev;
-	strscpy(dev->mdev.model, "vicodec", sizeof(dev->mdev.model));
-	strscpy(dev->mdev.bus_info, "platform:vicodec",
-		sizeof(dev->mdev.bus_info));
-	media_device_init(&dev->mdev);
-	dev->mdev.ops = &vicodec_m2m_media_ops;
-	dev->v4l2_dev.mdev = &dev->mdev;
-#endif
-
-	platform_set_drvdata(pdev, dev);
-
-	if (register_instance(dev, &dev->stateful_enc,
-			      "stateful-encoder", true))
-		goto unreg_dev;
-
-	if (register_instance(dev, &dev->stateful_dec,
-			      "stateful-decoder", false))
-		goto unreg_sf_enc;
-
-	if (register_instance(dev, &dev->stateless_dec,
-			      "stateless-decoder", false))
-		goto unreg_sf_dec;
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-	ret = v4l2_m2m_register_media_controller(dev->stateful_enc.m2m_dev,
-						 &dev->stateful_enc.vfd,
-						 MEDIA_ENT_F_PROC_VIDEO_ENCODER);
-	if (ret) {
-		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller for enc\n");
-		goto unreg_m2m;
-	}
-
-	ret = v4l2_m2m_register_media_controller(dev->stateful_dec.m2m_dev,
-						 &dev->stateful_dec.vfd,
-						 MEDIA_ENT_F_PROC_VIDEO_DECODER);
-	if (ret) {
-		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller for dec\n");
-		goto unreg_m2m_sf_enc_mc;
-	}
-
-	ret = v4l2_m2m_register_media_controller(dev->stateless_dec.m2m_dev,
-						 &dev->stateless_dec.vfd,
-						 MEDIA_ENT_F_PROC_VIDEO_DECODER);
-	if (ret) {
-		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller for stateless dec\n");
-		goto unreg_m2m_sf_dec_mc;
-	}
-
-	ret = media_device_register(&dev->mdev);
-	if (ret) {
-		v4l2_err(&dev->v4l2_dev, "Failed to register mem2mem media device\n");
-		goto unreg_m2m_sl_dec_mc;
-	}
-#endif
-	return 0;
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-unreg_m2m_sl_dec_mc:
-	v4l2_m2m_unregister_media_controller(dev->stateless_dec.m2m_dev);
-unreg_m2m_sf_dec_mc:
-	v4l2_m2m_unregister_media_controller(dev->stateful_dec.m2m_dev);
-unreg_m2m_sf_enc_mc:
-	v4l2_m2m_unregister_media_controller(dev->stateful_enc.m2m_dev);
-unreg_m2m:
-	video_unregister_device(&dev->stateless_dec.vfd);
-	v4l2_m2m_release(dev->stateless_dec.m2m_dev);
-#endif
-unreg_sf_dec:
-	video_unregister_device(&dev->stateful_dec.vfd);
-	v4l2_m2m_release(dev->stateful_dec.m2m_dev);
-unreg_sf_enc:
-	video_unregister_device(&dev->stateful_enc.vfd);
-	v4l2_m2m_release(dev->stateful_enc.m2m_dev);
-unreg_dev:
-	v4l2_device_unregister(&dev->v4l2_dev);
-free_dev:
-	kfree(dev);
-
-	return ret;
-}
-
-static int vicodec_remove(struct platform_device *pdev)
-{
-	struct vicodec_dev *dev = platform_get_drvdata(pdev);
-
-	v4l2_info(&dev->v4l2_dev, "Removing " VICODEC_NAME);
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-	media_device_unregister(&dev->mdev);
-	v4l2_m2m_unregister_media_controller(dev->stateful_enc.m2m_dev);
-	v4l2_m2m_unregister_media_controller(dev->stateful_dec.m2m_dev);
-	v4l2_m2m_unregister_media_controller(dev->stateless_dec.m2m_dev);
-#endif
-
-	video_unregister_device(&dev->stateful_enc.vfd);
-	video_unregister_device(&dev->stateful_dec.vfd);
-	video_unregister_device(&dev->stateless_dec.vfd);
-	v4l2_device_put(&dev->v4l2_dev);
-
-	return 0;
-}
-
-static struct platform_driver vicodec_pdrv = {
-	.probe		= vicodec_probe,
-	.remove		= vicodec_remove,
-	.driver		= {
-		.name	= VICODEC_NAME,
-	},
-};
-
-static void __exit vicodec_exit(void)
-{
-	platform_driver_unregister(&vicodec_pdrv);
-	platform_device_unregister(&vicodec_pdev);
-}
-
-static int __init vicodec_init(void)
-{
-	int ret;
-
-	ret = platform_device_register(&vicodec_pdev);
-	if (ret)
-		return ret;
-
-	ret = platform_driver_register(&vicodec_pdrv);
-	if (ret)
-		platform_device_unregister(&vicodec_pdev);
-
-	return ret;
-}
-
-module_init(vicodec_init);
-module_exit(vicodec_exit);
diff --git a/drivers/media/platform/vim2m.c b/drivers/media/platform/vim2m.c
deleted file mode 100644
index ac6717fbb764..000000000000
--- a/drivers/media/platform/vim2m.c
+++ /dev/null
@@ -1,1441 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * A virtual v4l2-mem2mem example device.
- *
- * This is a virtual device driver for testing mem-to-mem videobuf framework.
- * It simulates a device that uses memory buffers for both source and
- * destination, processes the data and issues an "irq" (simulated by a delayed
- * workqueue).
- * The device is capable of multi-instance, multi-buffer-per-transaction
- * operation (via the mem2mem framework).
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * Pawel Osciak, <pawel@osciak.com>
- * Marek Szyprowski, <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version
- */
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-#include <linux/platform_device.h>
-#include <media/v4l2-mem2mem.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-event.h>
-#include <media/videobuf2-vmalloc.h>
-
-MODULE_DESCRIPTION("Virtual device for mem2mem framework testing");
-MODULE_AUTHOR("Pawel Osciak, <pawel@osciak.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.2");
-MODULE_ALIAS("mem2mem_testdev");
-
-static unsigned int debug;
-module_param(debug, uint, 0644);
-MODULE_PARM_DESC(debug, "debug level");
-
-/* Default transaction time in msec */
-static unsigned int default_transtime = 40; /* Max 25 fps */
-module_param(default_transtime, uint, 0644);
-MODULE_PARM_DESC(default_transtime, "default transaction time in ms");
-
-#define MIN_W 32
-#define MIN_H 32
-#define MAX_W 640
-#define MAX_H 480
-
-/* Pixel alignment for non-bayer formats */
-#define WIDTH_ALIGN 2
-#define HEIGHT_ALIGN 1
-
-/* Pixel alignment for bayer formats */
-#define BAYER_WIDTH_ALIGN  2
-#define BAYER_HEIGHT_ALIGN 2
-
-/* Flags that indicate a format can be used for capture/output */
-#define MEM2MEM_CAPTURE	BIT(0)
-#define MEM2MEM_OUTPUT	BIT(1)
-
-#define MEM2MEM_NAME		"vim2m"
-
-/* Per queue */
-#define MEM2MEM_DEF_NUM_BUFS	VIDEO_MAX_FRAME
-/* In bytes, per queue */
-#define MEM2MEM_VID_MEM_LIMIT	(16 * 1024 * 1024)
-
-/* Flags that indicate processing mode */
-#define MEM2MEM_HFLIP	BIT(0)
-#define MEM2MEM_VFLIP	BIT(1)
-
-#define dprintk(dev, lvl, fmt, arg...) \
-	v4l2_dbg(lvl, debug, &(dev)->v4l2_dev, "%s: " fmt, __func__, ## arg)
-
-static void vim2m_dev_release(struct device *dev)
-{}
-
-static struct platform_device vim2m_pdev = {
-	.name		= MEM2MEM_NAME,
-	.dev.release	= vim2m_dev_release,
-};
-
-struct vim2m_fmt {
-	u32	fourcc;
-	int	depth;
-	/* Types the format can be used for */
-	u32     types;
-};
-
-static struct vim2m_fmt formats[] = {
-	{
-		.fourcc	= V4L2_PIX_FMT_RGB565,  /* rrrrrggg gggbbbbb */
-		.depth	= 16,
-		.types  = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_RGB565X, /* gggbbbbb rrrrrggg */
-		.depth	= 16,
-		.types  = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_RGB24,
-		.depth	= 24,
-		.types  = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_BGR24,
-		.depth	= 24,
-		.types  = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_YUYV,
-		.depth	= 16,
-		.types  = MEM2MEM_CAPTURE,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_SBGGR8,
-		.depth	= 8,
-		.types  = MEM2MEM_CAPTURE,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_SGBRG8,
-		.depth	= 8,
-		.types  = MEM2MEM_CAPTURE,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_SGRBG8,
-		.depth	= 8,
-		.types  = MEM2MEM_CAPTURE,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_SRGGB8,
-		.depth	= 8,
-		.types  = MEM2MEM_CAPTURE,
-	},
-};
-
-#define NUM_FORMATS ARRAY_SIZE(formats)
-
-/* Per-queue, driver-specific private data */
-struct vim2m_q_data {
-	unsigned int		width;
-	unsigned int		height;
-	unsigned int		sizeimage;
-	unsigned int		sequence;
-	struct vim2m_fmt	*fmt;
-};
-
-enum {
-	V4L2_M2M_SRC = 0,
-	V4L2_M2M_DST = 1,
-};
-
-#define V4L2_CID_TRANS_TIME_MSEC	(V4L2_CID_USER_BASE + 0x1000)
-#define V4L2_CID_TRANS_NUM_BUFS		(V4L2_CID_USER_BASE + 0x1001)
-
-static struct vim2m_fmt *find_format(u32 fourcc)
-{
-	struct vim2m_fmt *fmt;
-	unsigned int k;
-
-	for (k = 0; k < NUM_FORMATS; k++) {
-		fmt = &formats[k];
-		if (fmt->fourcc == fourcc)
-			break;
-	}
-
-	if (k == NUM_FORMATS)
-		return NULL;
-
-	return &formats[k];
-}
-
-static void get_alignment(u32 fourcc,
-			  unsigned int *walign, unsigned int *halign)
-{
-	switch (fourcc) {
-	case V4L2_PIX_FMT_SBGGR8:
-	case V4L2_PIX_FMT_SGBRG8:
-	case V4L2_PIX_FMT_SGRBG8:
-	case V4L2_PIX_FMT_SRGGB8:
-		*walign = BAYER_WIDTH_ALIGN;
-		*halign = BAYER_HEIGHT_ALIGN;
-		return;
-	default:
-		*walign = WIDTH_ALIGN;
-		*halign = HEIGHT_ALIGN;
-		return;
-	}
-}
-
-struct vim2m_dev {
-	struct v4l2_device	v4l2_dev;
-	struct video_device	vfd;
-#ifdef CONFIG_MEDIA_CONTROLLER
-	struct media_device	mdev;
-#endif
-
-	atomic_t		num_inst;
-	struct mutex		dev_mutex;
-
-	struct v4l2_m2m_dev	*m2m_dev;
-};
-
-struct vim2m_ctx {
-	struct v4l2_fh		fh;
-	struct vim2m_dev	*dev;
-
-	struct v4l2_ctrl_handler hdl;
-
-	/* Processed buffers in this transaction */
-	u8			num_processed;
-
-	/* Transaction length (i.e. how many buffers per transaction) */
-	u32			translen;
-	/* Transaction time (i.e. simulated processing time) in milliseconds */
-	u32			transtime;
-
-	struct mutex		vb_mutex;
-	struct delayed_work	work_run;
-	spinlock_t		irqlock;
-
-	/* Abort requested by m2m */
-	int			aborting;
-
-	/* Processing mode */
-	int			mode;
-
-	enum v4l2_colorspace	colorspace;
-	enum v4l2_ycbcr_encoding ycbcr_enc;
-	enum v4l2_xfer_func	xfer_func;
-	enum v4l2_quantization	quant;
-
-	/* Source and destination queue data */
-	struct vim2m_q_data   q_data[2];
-};
-
-static inline struct vim2m_ctx *file2ctx(struct file *file)
-{
-	return container_of(file->private_data, struct vim2m_ctx, fh);
-}
-
-static struct vim2m_q_data *get_q_data(struct vim2m_ctx *ctx,
-				       enum v4l2_buf_type type)
-{
-	switch (type) {
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return &ctx->q_data[V4L2_M2M_SRC];
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		return &ctx->q_data[V4L2_M2M_DST];
-	default:
-		return NULL;
-	}
-}
-
-static const char *type_name(enum v4l2_buf_type type)
-{
-	switch (type) {
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return "Output";
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		return "Capture";
-	default:
-		return "Invalid";
-	}
-}
-
-#define CLIP(__color) \
-	(u8)(((__color) > 0xff) ? 0xff : (((__color) < 0) ? 0 : (__color)))
-
-static void copy_line(struct vim2m_q_data *q_data_out,
-		      u8 *src, u8 *dst, bool reverse)
-{
-	int x, depth = q_data_out->fmt->depth >> 3;
-
-	if (!reverse) {
-		memcpy(dst, src, q_data_out->width * depth);
-	} else {
-		for (x = 0; x < q_data_out->width >> 1; x++) {
-			memcpy(dst, src, depth);
-			memcpy(dst + depth, src - depth, depth);
-			src -= depth << 1;
-			dst += depth << 1;
-		}
-		return;
-	}
-}
-
-static void copy_two_pixels(struct vim2m_q_data *q_data_in,
-			    struct vim2m_q_data *q_data_out,
-			    u8 *src[2], u8 **dst, int ypos, bool reverse)
-{
-	struct vim2m_fmt *out = q_data_out->fmt;
-	struct vim2m_fmt *in = q_data_in->fmt;
-	u8 _r[2], _g[2], _b[2], *r, *g, *b;
-	int i;
-
-	/* Step 1: read two consecutive pixels from src pointer */
-
-	r = _r;
-	g = _g;
-	b = _b;
-
-	switch (in->fourcc) {
-	case V4L2_PIX_FMT_RGB565: /* rrrrrggg gggbbbbb */
-		for (i = 0; i < 2; i++) {
-			u16 pix = le16_to_cpu(*(__le16 *)(src[i]));
-
-			*r++ = (u8)(((pix & 0xf800) >> 11) << 3) | 0x07;
-			*g++ = (u8)((((pix & 0x07e0) >> 5)) << 2) | 0x03;
-			*b++ = (u8)((pix & 0x1f) << 3) | 0x07;
-		}
-		break;
-	case V4L2_PIX_FMT_RGB565X: /* gggbbbbb rrrrrggg */
-		for (i = 0; i < 2; i++) {
-			u16 pix = be16_to_cpu(*(__be16 *)(src[i]));
-
-			*r++ = (u8)(((pix & 0xf800) >> 11) << 3) | 0x07;
-			*g++ = (u8)((((pix & 0x07e0) >> 5)) << 2) | 0x03;
-			*b++ = (u8)((pix & 0x1f) << 3) | 0x07;
-		}
-		break;
-	default:
-	case V4L2_PIX_FMT_RGB24:
-		for (i = 0; i < 2; i++) {
-			*r++ = src[i][0];
-			*g++ = src[i][1];
-			*b++ = src[i][2];
-		}
-		break;
-	case V4L2_PIX_FMT_BGR24:
-		for (i = 0; i < 2; i++) {
-			*b++ = src[i][0];
-			*g++ = src[i][1];
-			*r++ = src[i][2];
-		}
-		break;
-	}
-
-	/* Step 2: store two consecutive points, reversing them if needed */
-
-	r = _r;
-	g = _g;
-	b = _b;
-
-	switch (out->fourcc) {
-	case V4L2_PIX_FMT_RGB565: /* rrrrrggg gggbbbbb */
-		for (i = 0; i < 2; i++) {
-			u16 pix;
-			__le16 *dst_pix = (__le16 *)*dst;
-
-			pix = ((*r << 8) & 0xf800) | ((*g << 3) & 0x07e0) |
-			      (*b >> 3);
-
-			*dst_pix = cpu_to_le16(pix);
-
-			*dst += 2;
-		}
-		return;
-	case V4L2_PIX_FMT_RGB565X: /* gggbbbbb rrrrrggg */
-		for (i = 0; i < 2; i++) {
-			u16 pix;
-			__be16 *dst_pix = (__be16 *)*dst;
-
-			pix = ((*r << 8) & 0xf800) | ((*g << 3) & 0x07e0) |
-			      (*b >> 3);
-
-			*dst_pix = cpu_to_be16(pix);
-
-			*dst += 2;
-		}
-		return;
-	case V4L2_PIX_FMT_RGB24:
-		for (i = 0; i < 2; i++) {
-			*(*dst)++ = *r++;
-			*(*dst)++ = *g++;
-			*(*dst)++ = *b++;
-		}
-		return;
-	case V4L2_PIX_FMT_BGR24:
-		for (i = 0; i < 2; i++) {
-			*(*dst)++ = *b++;
-			*(*dst)++ = *g++;
-			*(*dst)++ = *r++;
-		}
-		return;
-	case V4L2_PIX_FMT_YUYV:
-	default:
-	{
-		u8 y, y1, u, v;
-
-		y = ((8453  * (*r) + 16594 * (*g) +  3223 * (*b)
-		     + 524288) >> 15);
-		u = ((-4878 * (*r) - 9578  * (*g) + 14456 * (*b)
-		     + 4210688) >> 15);
-		v = ((14456 * (*r++) - 12105 * (*g++) - 2351 * (*b++)
-		     + 4210688) >> 15);
-		y1 = ((8453 * (*r) + 16594 * (*g) +  3223 * (*b)
-		     + 524288) >> 15);
-
-		*(*dst)++ = y;
-		*(*dst)++ = u;
-
-		*(*dst)++ = y1;
-		*(*dst)++ = v;
-		return;
-	}
-	case V4L2_PIX_FMT_SBGGR8:
-		if (!(ypos & 1)) {
-			*(*dst)++ = *b;
-			*(*dst)++ = *++g;
-		} else {
-			*(*dst)++ = *g;
-			*(*dst)++ = *++r;
-		}
-		return;
-	case V4L2_PIX_FMT_SGBRG8:
-		if (!(ypos & 1)) {
-			*(*dst)++ = *g;
-			*(*dst)++ = *++b;
-		} else {
-			*(*dst)++ = *r;
-			*(*dst)++ = *++g;
-		}
-		return;
-	case V4L2_PIX_FMT_SGRBG8:
-		if (!(ypos & 1)) {
-			*(*dst)++ = *g;
-			*(*dst)++ = *++r;
-		} else {
-			*(*dst)++ = *b;
-			*(*dst)++ = *++g;
-		}
-		return;
-	case V4L2_PIX_FMT_SRGGB8:
-		if (!(ypos & 1)) {
-			*(*dst)++ = *r;
-			*(*dst)++ = *++g;
-		} else {
-			*(*dst)++ = *g;
-			*(*dst)++ = *++b;
-		}
-		return;
-	}
-}
-
-static int device_process(struct vim2m_ctx *ctx,
-			  struct vb2_v4l2_buffer *in_vb,
-			  struct vb2_v4l2_buffer *out_vb)
-{
-	struct vim2m_dev *dev = ctx->dev;
-	struct vim2m_q_data *q_data_in, *q_data_out;
-	u8 *p_in, *p_line, *p_in_x[2], *p, *p_out;
-	unsigned int width, height, bytesperline, bytes_per_pixel;
-	unsigned int x, y, y_in, y_out, x_int, x_fract, x_err, x_offset;
-	int start, end, step;
-
-	q_data_in = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
-	if (!q_data_in)
-		return 0;
-	bytesperline = (q_data_in->width * q_data_in->fmt->depth) >> 3;
-	bytes_per_pixel = q_data_in->fmt->depth >> 3;
-
-	q_data_out = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
-	if (!q_data_out)
-		return 0;
-
-	/* As we're doing scaling, use the output dimensions here */
-	height = q_data_out->height;
-	width = q_data_out->width;
-
-	p_in = vb2_plane_vaddr(&in_vb->vb2_buf, 0);
-	p_out = vb2_plane_vaddr(&out_vb->vb2_buf, 0);
-	if (!p_in || !p_out) {
-		v4l2_err(&dev->v4l2_dev,
-			 "Acquiring kernel pointers to buffers failed\n");
-		return -EFAULT;
-	}
-
-	out_vb->sequence = q_data_out->sequence++;
-	in_vb->sequence = q_data_in->sequence++;
-	v4l2_m2m_buf_copy_metadata(in_vb, out_vb, true);
-
-	if (ctx->mode & MEM2MEM_VFLIP) {
-		start = height - 1;
-		end = -1;
-		step = -1;
-	} else {
-		start = 0;
-		end = height;
-		step = 1;
-	}
-	y_out = 0;
-
-	/*
-	 * When format and resolution are identical,
-	 * we can use a faster copy logic
-	 */
-	if (q_data_in->fmt->fourcc == q_data_out->fmt->fourcc &&
-	    q_data_in->width == q_data_out->width &&
-	    q_data_in->height == q_data_out->height) {
-		for (y = start; y != end; y += step, y_out++) {
-			p = p_in + (y * bytesperline);
-			if (ctx->mode & MEM2MEM_HFLIP)
-				p += bytesperline - (q_data_in->fmt->depth >> 3);
-
-			copy_line(q_data_out, p, p_out,
-				  ctx->mode & MEM2MEM_HFLIP);
-
-			p_out += bytesperline;
-		}
-		return 0;
-	}
-
-	/* Slower algorithm with format conversion, hflip, vflip and scaler */
-
-	/* To speed scaler up, use Bresenham for X dimension */
-	x_int = q_data_in->width / q_data_out->width;
-	x_fract = q_data_in->width % q_data_out->width;
-
-	for (y = start; y != end; y += step, y_out++) {
-		y_in = (y * q_data_in->height) / q_data_out->height;
-		x_offset = 0;
-		x_err = 0;
-
-		p_line = p_in + (y_in * bytesperline);
-		if (ctx->mode & MEM2MEM_HFLIP)
-			p_line += bytesperline - (q_data_in->fmt->depth >> 3);
-		p_in_x[0] = p_line;
-
-		for (x = 0; x < width >> 1; x++) {
-			x_offset += x_int;
-			x_err += x_fract;
-			if (x_err > width) {
-				x_offset++;
-				x_err -= width;
-			}
-
-			if (ctx->mode & MEM2MEM_HFLIP)
-				p_in_x[1] = p_line - x_offset * bytes_per_pixel;
-			else
-				p_in_x[1] = p_line + x_offset * bytes_per_pixel;
-
-			copy_two_pixels(q_data_in, q_data_out,
-					p_in_x, &p_out, y_out,
-					ctx->mode & MEM2MEM_HFLIP);
-
-			/* Calculate the next p_in_x0 */
-			x_offset += x_int;
-			x_err += x_fract;
-			if (x_err > width) {
-				x_offset++;
-				x_err -= width;
-			}
-
-			if (ctx->mode & MEM2MEM_HFLIP)
-				p_in_x[0] = p_line - x_offset * bytes_per_pixel;
-			else
-				p_in_x[0] = p_line + x_offset * bytes_per_pixel;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * mem2mem callbacks
- */
-
-/*
- * job_ready() - check whether an instance is ready to be scheduled to run
- */
-static int job_ready(void *priv)
-{
-	struct vim2m_ctx *ctx = priv;
-
-	if (v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) < ctx->translen
-	    || v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx) < ctx->translen) {
-		dprintk(ctx->dev, 1, "Not enough buffers available\n");
-		return 0;
-	}
-
-	return 1;
-}
-
-static void job_abort(void *priv)
-{
-	struct vim2m_ctx *ctx = priv;
-
-	/* Will cancel the transaction in the next interrupt handler */
-	ctx->aborting = 1;
-}
-
-/* device_run() - prepares and starts the device
- *
- * This simulates all the immediate preparations required before starting
- * a device. This will be called by the framework when it decides to schedule
- * a particular instance.
- */
-static void device_run(void *priv)
-{
-	struct vim2m_ctx *ctx = priv;
-	struct vb2_v4l2_buffer *src_buf, *dst_buf;
-
-	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
-	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
-
-	/* Apply request controls if any */
-	v4l2_ctrl_request_setup(src_buf->vb2_buf.req_obj.req,
-				&ctx->hdl);
-
-	device_process(ctx, src_buf, dst_buf);
-
-	/* Complete request controls if any */
-	v4l2_ctrl_request_complete(src_buf->vb2_buf.req_obj.req,
-				   &ctx->hdl);
-
-	/* Run delayed work, which simulates a hardware irq  */
-	schedule_delayed_work(&ctx->work_run, msecs_to_jiffies(ctx->transtime));
-}
-
-static void device_work(struct work_struct *w)
-{
-	struct vim2m_ctx *curr_ctx;
-	struct vim2m_dev *vim2m_dev;
-	struct vb2_v4l2_buffer *src_vb, *dst_vb;
-	unsigned long flags;
-
-	curr_ctx = container_of(w, struct vim2m_ctx, work_run.work);
-
-	if (!curr_ctx) {
-		pr_err("Instance released before the end of transaction\n");
-		return;
-	}
-
-	vim2m_dev = curr_ctx->dev;
-
-	src_vb = v4l2_m2m_src_buf_remove(curr_ctx->fh.m2m_ctx);
-	dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->fh.m2m_ctx);
-
-	curr_ctx->num_processed++;
-
-	spin_lock_irqsave(&curr_ctx->irqlock, flags);
-	v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_DONE);
-	v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_DONE);
-	spin_unlock_irqrestore(&curr_ctx->irqlock, flags);
-
-	if (curr_ctx->num_processed == curr_ctx->translen
-	    || curr_ctx->aborting) {
-		dprintk(curr_ctx->dev, 2, "Finishing capture buffer fill\n");
-		curr_ctx->num_processed = 0;
-		v4l2_m2m_job_finish(vim2m_dev->m2m_dev, curr_ctx->fh.m2m_ctx);
-	} else {
-		device_run(curr_ctx);
-	}
-}
-
-/*
- * video ioctls
- */
-static int vidioc_querycap(struct file *file, void *priv,
-			   struct v4l2_capability *cap)
-{
-	strscpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver));
-	strscpy(cap->card, MEM2MEM_NAME, sizeof(cap->card));
-	snprintf(cap->bus_info, sizeof(cap->bus_info),
-		 "platform:%s", MEM2MEM_NAME);
-	return 0;
-}
-
-static int enum_fmt(struct v4l2_fmtdesc *f, u32 type)
-{
-	int i, num;
-	struct vim2m_fmt *fmt;
-
-	num = 0;
-
-	for (i = 0; i < NUM_FORMATS; ++i) {
-		if (formats[i].types & type) {
-			/* index-th format of type type found ? */
-			if (num == f->index)
-				break;
-			/*
-			 * Correct type but haven't reached our index yet,
-			 * just increment per-type index
-			 */
-			++num;
-		}
-	}
-
-	if (i < NUM_FORMATS) {
-		/* Format found */
-		fmt = &formats[i];
-		f->pixelformat = fmt->fourcc;
-		return 0;
-	}
-
-	/* Format not found */
-	return -EINVAL;
-}
-
-static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
-				   struct v4l2_fmtdesc *f)
-{
-	return enum_fmt(f, MEM2MEM_CAPTURE);
-}
-
-static int vidioc_enum_fmt_vid_out(struct file *file, void *priv,
-				   struct v4l2_fmtdesc *f)
-{
-	return enum_fmt(f, MEM2MEM_OUTPUT);
-}
-
-static int vidioc_enum_framesizes(struct file *file, void *priv,
-				  struct v4l2_frmsizeenum *fsize)
-{
-	if (fsize->index != 0)
-		return -EINVAL;
-
-	if (!find_format(fsize->pixel_format))
-		return -EINVAL;
-
-	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
-	fsize->stepwise.min_width = MIN_W;
-	fsize->stepwise.min_height = MIN_H;
-	fsize->stepwise.max_width = MAX_W;
-	fsize->stepwise.max_height = MAX_H;
-
-	get_alignment(fsize->pixel_format,
-		      &fsize->stepwise.step_width,
-		      &fsize->stepwise.step_height);
-	return 0;
-}
-
-static int vidioc_g_fmt(struct vim2m_ctx *ctx, struct v4l2_format *f)
-{
-	struct vb2_queue *vq;
-	struct vim2m_q_data *q_data;
-
-	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
-	if (!vq)
-		return -EINVAL;
-
-	q_data = get_q_data(ctx, f->type);
-	if (!q_data)
-		return -EINVAL;
-
-	f->fmt.pix.width	= q_data->width;
-	f->fmt.pix.height	= q_data->height;
-	f->fmt.pix.field	= V4L2_FIELD_NONE;
-	f->fmt.pix.pixelformat	= q_data->fmt->fourcc;
-	f->fmt.pix.bytesperline	= (q_data->width * q_data->fmt->depth) >> 3;
-	f->fmt.pix.sizeimage	= q_data->sizeimage;
-	f->fmt.pix.colorspace	= ctx->colorspace;
-	f->fmt.pix.xfer_func	= ctx->xfer_func;
-	f->fmt.pix.ycbcr_enc	= ctx->ycbcr_enc;
-	f->fmt.pix.quantization	= ctx->quant;
-
-	return 0;
-}
-
-static int vidioc_g_fmt_vid_out(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	return vidioc_g_fmt(file2ctx(file), f);
-}
-
-static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	return vidioc_g_fmt(file2ctx(file), f);
-}
-
-static int vidioc_try_fmt(struct v4l2_format *f, struct vim2m_fmt *fmt)
-{
-	int walign, halign;
-	/*
-	 * V4L2 specification specifies the driver corrects the
-	 * format struct if any of the dimensions is unsupported
-	 */
-	if (f->fmt.pix.height < MIN_H)
-		f->fmt.pix.height = MIN_H;
-	else if (f->fmt.pix.height > MAX_H)
-		f->fmt.pix.height = MAX_H;
-
-	if (f->fmt.pix.width < MIN_W)
-		f->fmt.pix.width = MIN_W;
-	else if (f->fmt.pix.width > MAX_W)
-		f->fmt.pix.width = MAX_W;
-
-	get_alignment(f->fmt.pix.pixelformat, &walign, &halign);
-	f->fmt.pix.width &= ~(walign - 1);
-	f->fmt.pix.height &= ~(halign - 1);
-	f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3;
-	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
-	f->fmt.pix.field = V4L2_FIELD_NONE;
-
-	return 0;
-}
-
-static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct vim2m_fmt *fmt;
-	struct vim2m_ctx *ctx = file2ctx(file);
-
-	fmt = find_format(f->fmt.pix.pixelformat);
-	if (!fmt) {
-		f->fmt.pix.pixelformat = formats[0].fourcc;
-		fmt = find_format(f->fmt.pix.pixelformat);
-	}
-	if (!(fmt->types & MEM2MEM_CAPTURE)) {
-		v4l2_err(&ctx->dev->v4l2_dev,
-			 "Fourcc format (0x%08x) invalid.\n",
-			 f->fmt.pix.pixelformat);
-		return -EINVAL;
-	}
-	f->fmt.pix.colorspace = ctx->colorspace;
-	f->fmt.pix.xfer_func = ctx->xfer_func;
-	f->fmt.pix.ycbcr_enc = ctx->ycbcr_enc;
-	f->fmt.pix.quantization = ctx->quant;
-
-	return vidioc_try_fmt(f, fmt);
-}
-
-static int vidioc_try_fmt_vid_out(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct vim2m_fmt *fmt;
-	struct vim2m_ctx *ctx = file2ctx(file);
-
-	fmt = find_format(f->fmt.pix.pixelformat);
-	if (!fmt) {
-		f->fmt.pix.pixelformat = formats[0].fourcc;
-		fmt = find_format(f->fmt.pix.pixelformat);
-	}
-	if (!(fmt->types & MEM2MEM_OUTPUT)) {
-		v4l2_err(&ctx->dev->v4l2_dev,
-			 "Fourcc format (0x%08x) invalid.\n",
-			 f->fmt.pix.pixelformat);
-		return -EINVAL;
-	}
-	if (!f->fmt.pix.colorspace)
-		f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709;
-
-	return vidioc_try_fmt(f, fmt);
-}
-
-static int vidioc_s_fmt(struct vim2m_ctx *ctx, struct v4l2_format *f)
-{
-	struct vim2m_q_data *q_data;
-	struct vb2_queue *vq;
-
-	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
-	if (!vq)
-		return -EINVAL;
-
-	q_data = get_q_data(ctx, f->type);
-	if (!q_data)
-		return -EINVAL;
-
-	if (vb2_is_busy(vq)) {
-		v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__);
-		return -EBUSY;
-	}
-
-	q_data->fmt		= find_format(f->fmt.pix.pixelformat);
-	q_data->width		= f->fmt.pix.width;
-	q_data->height		= f->fmt.pix.height;
-	q_data->sizeimage	= q_data->width * q_data->height
-				* q_data->fmt->depth >> 3;
-
-	dprintk(ctx->dev, 1,
-		"Format for type %s: %dx%d (%d bpp), fmt: %c%c%c%c\n",
-		type_name(f->type), q_data->width, q_data->height,
-		q_data->fmt->depth,
-		(q_data->fmt->fourcc & 0xff),
-		(q_data->fmt->fourcc >>  8) & 0xff,
-		(q_data->fmt->fourcc >> 16) & 0xff,
-		(q_data->fmt->fourcc >> 24) & 0xff);
-
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	int ret;
-
-	ret = vidioc_try_fmt_vid_cap(file, priv, f);
-	if (ret)
-		return ret;
-
-	return vidioc_s_fmt(file2ctx(file), f);
-}
-
-static int vidioc_s_fmt_vid_out(struct file *file, void *priv,
-				struct v4l2_format *f)
-{
-	struct vim2m_ctx *ctx = file2ctx(file);
-	int ret;
-
-	ret = vidioc_try_fmt_vid_out(file, priv, f);
-	if (ret)
-		return ret;
-
-	ret = vidioc_s_fmt(file2ctx(file), f);
-	if (!ret) {
-		ctx->colorspace = f->fmt.pix.colorspace;
-		ctx->xfer_func = f->fmt.pix.xfer_func;
-		ctx->ycbcr_enc = f->fmt.pix.ycbcr_enc;
-		ctx->quant = f->fmt.pix.quantization;
-	}
-	return ret;
-}
-
-static int vim2m_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vim2m_ctx *ctx =
-		container_of(ctrl->handler, struct vim2m_ctx, hdl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_HFLIP:
-		if (ctrl->val)
-			ctx->mode |= MEM2MEM_HFLIP;
-		else
-			ctx->mode &= ~MEM2MEM_HFLIP;
-		break;
-
-	case V4L2_CID_VFLIP:
-		if (ctrl->val)
-			ctx->mode |= MEM2MEM_VFLIP;
-		else
-			ctx->mode &= ~MEM2MEM_VFLIP;
-		break;
-
-	case V4L2_CID_TRANS_TIME_MSEC:
-		ctx->transtime = ctrl->val;
-		if (ctx->transtime < 1)
-			ctx->transtime = 1;
-		break;
-
-	case V4L2_CID_TRANS_NUM_BUFS:
-		ctx->translen = ctrl->val;
-		break;
-
-	default:
-		v4l2_err(&ctx->dev->v4l2_dev, "Invalid control\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vim2m_ctrl_ops = {
-	.s_ctrl = vim2m_s_ctrl,
-};
-
-static const struct v4l2_ioctl_ops vim2m_ioctl_ops = {
-	.vidioc_querycap	= vidioc_querycap,
-
-	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
-	.vidioc_enum_framesizes = vidioc_enum_framesizes,
-	.vidioc_g_fmt_vid_cap	= vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap	= vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap	= vidioc_s_fmt_vid_cap,
-
-	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out,
-	.vidioc_g_fmt_vid_out	= vidioc_g_fmt_vid_out,
-	.vidioc_try_fmt_vid_out	= vidioc_try_fmt_vid_out,
-	.vidioc_s_fmt_vid_out	= vidioc_s_fmt_vid_out,
-
-	.vidioc_reqbufs		= v4l2_m2m_ioctl_reqbufs,
-	.vidioc_querybuf	= v4l2_m2m_ioctl_querybuf,
-	.vidioc_qbuf		= v4l2_m2m_ioctl_qbuf,
-	.vidioc_dqbuf		= v4l2_m2m_ioctl_dqbuf,
-	.vidioc_prepare_buf	= v4l2_m2m_ioctl_prepare_buf,
-	.vidioc_create_bufs	= v4l2_m2m_ioctl_create_bufs,
-	.vidioc_expbuf		= v4l2_m2m_ioctl_expbuf,
-
-	.vidioc_streamon	= v4l2_m2m_ioctl_streamon,
-	.vidioc_streamoff	= v4l2_m2m_ioctl_streamoff,
-
-	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
-	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-};
-
-/*
- * Queue operations
- */
-
-static int vim2m_queue_setup(struct vb2_queue *vq,
-			     unsigned int *nbuffers,
-			     unsigned int *nplanes,
-			     unsigned int sizes[],
-			     struct device *alloc_devs[])
-{
-	struct vim2m_ctx *ctx = vb2_get_drv_priv(vq);
-	struct vim2m_q_data *q_data;
-	unsigned int size, count = *nbuffers;
-
-	q_data = get_q_data(ctx, vq->type);
-	if (!q_data)
-		return -EINVAL;
-
-	size = q_data->width * q_data->height * q_data->fmt->depth >> 3;
-
-	while (size * count > MEM2MEM_VID_MEM_LIMIT)
-		(count)--;
-	*nbuffers = count;
-
-	if (*nplanes)
-		return sizes[0] < size ? -EINVAL : 0;
-
-	*nplanes = 1;
-	sizes[0] = size;
-
-	dprintk(ctx->dev, 1, "%s: get %d buffer(s) of size %d each.\n",
-		type_name(vq->type), count, size);
-
-	return 0;
-}
-
-static int vim2m_buf_out_validate(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vim2m_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
-
-	if (vbuf->field == V4L2_FIELD_ANY)
-		vbuf->field = V4L2_FIELD_NONE;
-	if (vbuf->field != V4L2_FIELD_NONE) {
-		dprintk(ctx->dev, 1, "%s field isn't supported\n", __func__);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int vim2m_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vim2m_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
-	struct vim2m_q_data *q_data;
-
-	dprintk(ctx->dev, 2, "type: %s\n", type_name(vb->vb2_queue->type));
-
-	q_data = get_q_data(ctx, vb->vb2_queue->type);
-	if (!q_data)
-		return -EINVAL;
-	if (vb2_plane_size(vb, 0) < q_data->sizeimage) {
-		dprintk(ctx->dev, 1,
-			"%s data will not fit into plane (%lu < %lu)\n",
-			__func__, vb2_plane_size(vb, 0),
-			(long)q_data->sizeimage);
-		return -EINVAL;
-	}
-
-	vb2_set_plane_payload(vb, 0, q_data->sizeimage);
-
-	return 0;
-}
-
-static void vim2m_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vim2m_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
-}
-
-static int vim2m_start_streaming(struct vb2_queue *q, unsigned int count)
-{
-	struct vim2m_ctx *ctx = vb2_get_drv_priv(q);
-	struct vim2m_q_data *q_data = get_q_data(ctx, q->type);
-
-	if (!q_data)
-		return -EINVAL;
-
-	if (V4L2_TYPE_IS_OUTPUT(q->type))
-		ctx->aborting = 0;
-
-	q_data->sequence = 0;
-	return 0;
-}
-
-static void vim2m_stop_streaming(struct vb2_queue *q)
-{
-	struct vim2m_ctx *ctx = vb2_get_drv_priv(q);
-	struct vb2_v4l2_buffer *vbuf;
-	unsigned long flags;
-
-	cancel_delayed_work_sync(&ctx->work_run);
-
-	for (;;) {
-		if (V4L2_TYPE_IS_OUTPUT(q->type))
-			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
-		else
-			vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
-		if (!vbuf)
-			return;
-		v4l2_ctrl_request_complete(vbuf->vb2_buf.req_obj.req,
-					   &ctx->hdl);
-		spin_lock_irqsave(&ctx->irqlock, flags);
-		v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
-		spin_unlock_irqrestore(&ctx->irqlock, flags);
-	}
-}
-
-static void vim2m_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vim2m_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->hdl);
-}
-
-static const struct vb2_ops vim2m_qops = {
-	.queue_setup	 = vim2m_queue_setup,
-	.buf_out_validate	 = vim2m_buf_out_validate,
-	.buf_prepare	 = vim2m_buf_prepare,
-	.buf_queue	 = vim2m_buf_queue,
-	.start_streaming = vim2m_start_streaming,
-	.stop_streaming  = vim2m_stop_streaming,
-	.wait_prepare	 = vb2_ops_wait_prepare,
-	.wait_finish	 = vb2_ops_wait_finish,
-	.buf_request_complete = vim2m_buf_request_complete,
-};
-
-static int queue_init(void *priv, struct vb2_queue *src_vq,
-		      struct vb2_queue *dst_vq)
-{
-	struct vim2m_ctx *ctx = priv;
-	int ret;
-
-	src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-	src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
-	src_vq->drv_priv = ctx;
-	src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
-	src_vq->ops = &vim2m_qops;
-	src_vq->mem_ops = &vb2_vmalloc_memops;
-	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
-	src_vq->lock = &ctx->vb_mutex;
-	src_vq->supports_requests = true;
-
-	ret = vb2_queue_init(src_vq);
-	if (ret)
-		return ret;
-
-	dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
-	dst_vq->drv_priv = ctx;
-	dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
-	dst_vq->ops = &vim2m_qops;
-	dst_vq->mem_ops = &vb2_vmalloc_memops;
-	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
-	dst_vq->lock = &ctx->vb_mutex;
-
-	return vb2_queue_init(dst_vq);
-}
-
-static struct v4l2_ctrl_config vim2m_ctrl_trans_time_msec = {
-	.ops = &vim2m_ctrl_ops,
-	.id = V4L2_CID_TRANS_TIME_MSEC,
-	.name = "Transaction Time (msec)",
-	.type = V4L2_CTRL_TYPE_INTEGER,
-	.min = 1,
-	.max = 10001,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vim2m_ctrl_trans_num_bufs = {
-	.ops = &vim2m_ctrl_ops,
-	.id = V4L2_CID_TRANS_NUM_BUFS,
-	.name = "Buffers Per Transaction",
-	.type = V4L2_CTRL_TYPE_INTEGER,
-	.def = 1,
-	.min = 1,
-	.max = MEM2MEM_DEF_NUM_BUFS,
-	.step = 1,
-};
-
-/*
- * File operations
- */
-static int vim2m_open(struct file *file)
-{
-	struct vim2m_dev *dev = video_drvdata(file);
-	struct vim2m_ctx *ctx = NULL;
-	struct v4l2_ctrl_handler *hdl;
-	int rc = 0;
-
-	if (mutex_lock_interruptible(&dev->dev_mutex))
-		return -ERESTARTSYS;
-	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
-	if (!ctx) {
-		rc = -ENOMEM;
-		goto open_unlock;
-	}
-
-	v4l2_fh_init(&ctx->fh, video_devdata(file));
-	file->private_data = &ctx->fh;
-	ctx->dev = dev;
-	hdl = &ctx->hdl;
-	v4l2_ctrl_handler_init(hdl, 4);
-	v4l2_ctrl_new_std(hdl, &vim2m_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
-	v4l2_ctrl_new_std(hdl, &vim2m_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
-
-	vim2m_ctrl_trans_time_msec.def = default_transtime;
-	v4l2_ctrl_new_custom(hdl, &vim2m_ctrl_trans_time_msec, NULL);
-	v4l2_ctrl_new_custom(hdl, &vim2m_ctrl_trans_num_bufs, NULL);
-	if (hdl->error) {
-		rc = hdl->error;
-		v4l2_ctrl_handler_free(hdl);
-		kfree(ctx);
-		goto open_unlock;
-	}
-	ctx->fh.ctrl_handler = hdl;
-	v4l2_ctrl_handler_setup(hdl);
-
-	ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0];
-	ctx->q_data[V4L2_M2M_SRC].width = 640;
-	ctx->q_data[V4L2_M2M_SRC].height = 480;
-	ctx->q_data[V4L2_M2M_SRC].sizeimage =
-		ctx->q_data[V4L2_M2M_SRC].width *
-		ctx->q_data[V4L2_M2M_SRC].height *
-		(ctx->q_data[V4L2_M2M_SRC].fmt->depth >> 3);
-	ctx->q_data[V4L2_M2M_DST] = ctx->q_data[V4L2_M2M_SRC];
-	ctx->colorspace = V4L2_COLORSPACE_REC709;
-
-	ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
-
-	mutex_init(&ctx->vb_mutex);
-	spin_lock_init(&ctx->irqlock);
-	INIT_DELAYED_WORK(&ctx->work_run, device_work);
-
-	if (IS_ERR(ctx->fh.m2m_ctx)) {
-		rc = PTR_ERR(ctx->fh.m2m_ctx);
-
-		v4l2_ctrl_handler_free(hdl);
-		v4l2_fh_exit(&ctx->fh);
-		kfree(ctx);
-		goto open_unlock;
-	}
-
-	v4l2_fh_add(&ctx->fh);
-	atomic_inc(&dev->num_inst);
-
-	dprintk(dev, 1, "Created instance: %p, m2m_ctx: %p\n",
-		ctx, ctx->fh.m2m_ctx);
-
-open_unlock:
-	mutex_unlock(&dev->dev_mutex);
-	return rc;
-}
-
-static int vim2m_release(struct file *file)
-{
-	struct vim2m_dev *dev = video_drvdata(file);
-	struct vim2m_ctx *ctx = file2ctx(file);
-
-	dprintk(dev, 1, "Releasing instance %p\n", ctx);
-
-	v4l2_fh_del(&ctx->fh);
-	v4l2_fh_exit(&ctx->fh);
-	v4l2_ctrl_handler_free(&ctx->hdl);
-	mutex_lock(&dev->dev_mutex);
-	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
-	mutex_unlock(&dev->dev_mutex);
-	kfree(ctx);
-
-	atomic_dec(&dev->num_inst);
-
-	return 0;
-}
-
-static void vim2m_device_release(struct video_device *vdev)
-{
-	struct vim2m_dev *dev = container_of(vdev, struct vim2m_dev, vfd);
-
-	v4l2_device_unregister(&dev->v4l2_dev);
-	v4l2_m2m_release(dev->m2m_dev);
-#ifdef CONFIG_MEDIA_CONTROLLER
-	media_device_cleanup(&dev->mdev);
-#endif
-	kfree(dev);
-}
-
-static const struct v4l2_file_operations vim2m_fops = {
-	.owner		= THIS_MODULE,
-	.open		= vim2m_open,
-	.release	= vim2m_release,
-	.poll		= v4l2_m2m_fop_poll,
-	.unlocked_ioctl	= video_ioctl2,
-	.mmap		= v4l2_m2m_fop_mmap,
-};
-
-static const struct video_device vim2m_videodev = {
-	.name		= MEM2MEM_NAME,
-	.vfl_dir	= VFL_DIR_M2M,
-	.fops		= &vim2m_fops,
-	.ioctl_ops	= &vim2m_ioctl_ops,
-	.minor		= -1,
-	.release	= vim2m_device_release,
-	.device_caps	= V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING,
-};
-
-static const struct v4l2_m2m_ops m2m_ops = {
-	.device_run	= device_run,
-	.job_ready	= job_ready,
-	.job_abort	= job_abort,
-};
-
-static const struct media_device_ops m2m_media_ops = {
-	.req_validate = vb2_request_validate,
-	.req_queue = v4l2_m2m_request_queue,
-};
-
-static int vim2m_probe(struct platform_device *pdev)
-{
-	struct vim2m_dev *dev;
-	struct video_device *vfd;
-	int ret;
-
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
-	if (ret)
-		goto error_free;
-
-	atomic_set(&dev->num_inst, 0);
-	mutex_init(&dev->dev_mutex);
-
-	dev->vfd = vim2m_videodev;
-	vfd = &dev->vfd;
-	vfd->lock = &dev->dev_mutex;
-	vfd->v4l2_dev = &dev->v4l2_dev;
-
-	ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
-	if (ret) {
-		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
-		goto error_v4l2;
-	}
-
-	video_set_drvdata(vfd, dev);
-	v4l2_info(&dev->v4l2_dev,
-		  "Device registered as /dev/video%d\n", vfd->num);
-
-	platform_set_drvdata(pdev, dev);
-
-	dev->m2m_dev = v4l2_m2m_init(&m2m_ops);
-	if (IS_ERR(dev->m2m_dev)) {
-		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n");
-		ret = PTR_ERR(dev->m2m_dev);
-		dev->m2m_dev = NULL;
-		goto error_dev;
-	}
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-	dev->mdev.dev = &pdev->dev;
-	strscpy(dev->mdev.model, "vim2m", sizeof(dev->mdev.model));
-	strscpy(dev->mdev.bus_info, "platform:vim2m",
-		sizeof(dev->mdev.bus_info));
-	media_device_init(&dev->mdev);
-	dev->mdev.ops = &m2m_media_ops;
-	dev->v4l2_dev.mdev = &dev->mdev;
-
-	ret = v4l2_m2m_register_media_controller(dev->m2m_dev, vfd,
-						 MEDIA_ENT_F_PROC_VIDEO_SCALER);
-	if (ret) {
-		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller\n");
-		goto error_dev;
-	}
-
-	ret = media_device_register(&dev->mdev);
-	if (ret) {
-		v4l2_err(&dev->v4l2_dev, "Failed to register mem2mem media device\n");
-		goto error_m2m_mc;
-	}
-#endif
-	return 0;
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-error_m2m_mc:
-	v4l2_m2m_unregister_media_controller(dev->m2m_dev);
-#endif
-error_dev:
-	video_unregister_device(&dev->vfd);
-	/* vim2m_device_release called by video_unregister_device to release various objects */
-	return ret;
-error_v4l2:
-	v4l2_device_unregister(&dev->v4l2_dev);
-error_free:
-	kfree(dev);
-
-	return ret;
-}
-
-static int vim2m_remove(struct platform_device *pdev)
-{
-	struct vim2m_dev *dev = platform_get_drvdata(pdev);
-
-	v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME);
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-	media_device_unregister(&dev->mdev);
-	v4l2_m2m_unregister_media_controller(dev->m2m_dev);
-#endif
-	video_unregister_device(&dev->vfd);
-
-	return 0;
-}
-
-static struct platform_driver vim2m_pdrv = {
-	.probe		= vim2m_probe,
-	.remove		= vim2m_remove,
-	.driver		= {
-		.name	= MEM2MEM_NAME,
-	},
-};
-
-static void __exit vim2m_exit(void)
-{
-	platform_driver_unregister(&vim2m_pdrv);
-	platform_device_unregister(&vim2m_pdev);
-}
-
-static int __init vim2m_init(void)
-{
-	int ret;
-
-	ret = platform_device_register(&vim2m_pdev);
-	if (ret)
-		return ret;
-
-	ret = platform_driver_register(&vim2m_pdrv);
-	if (ret)
-		platform_device_unregister(&vim2m_pdev);
-
-	return ret;
-}
-
-module_init(vim2m_init);
-module_exit(vim2m_exit);
diff --git a/drivers/media/platform/vimc/Kconfig b/drivers/media/platform/vimc/Kconfig
deleted file mode 100644
index bd221d3e1a4a..000000000000
--- a/drivers/media/platform/vimc/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config VIDEO_VIMC
-	tristate "Virtual Media Controller Driver (VIMC)"
-	depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	select VIDEOBUF2_VMALLOC
-	select VIDEO_V4L2_TPG
-	help
-	  Skeleton driver for Virtual Media Controller
-
-	  This driver can be compared to the vivid driver for emulating
-	  a media node that exposes a complex media topology. The topology
-	  is hard coded for now but is meant to be highly configurable in
-	  the future.
-
-	  When in doubt, say N.
diff --git a/drivers/media/platform/vimc/Makefile b/drivers/media/platform/vimc/Makefile
deleted file mode 100644
index a53b2b532e9f..000000000000
--- a/drivers/media/platform/vimc/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-vimc-y := vimc-core.o vimc-common.o vimc-streamer.o vimc-capture.o \
-		vimc-debayer.o vimc-scaler.o vimc-sensor.o
-
-obj-$(CONFIG_VIDEO_VIMC) += vimc.o
-
diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c
deleted file mode 100644
index 23e740c1c5c0..000000000000
--- a/drivers/media/platform/vimc/vimc-capture.c
+++ /dev/null
@@ -1,480 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * vimc-capture.c Virtual Media Controller Driver
- *
- * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
- */
-
-#include <media/v4l2-ioctl.h>
-#include <media/videobuf2-core.h>
-#include <media/videobuf2-vmalloc.h>
-
-#include "vimc-common.h"
-#include "vimc-streamer.h"
-
-struct vimc_cap_device {
-	struct vimc_ent_device ved;
-	struct video_device vdev;
-	struct v4l2_pix_format format;
-	struct vb2_queue queue;
-	struct list_head buf_list;
-	/*
-	 * NOTE: in a real driver, a spin lock must be used to access the
-	 * queue because the frames are generated from a hardware interruption
-	 * and the isr is not allowed to sleep.
-	 * Even if it is not necessary a spinlock in the vimc driver, we
-	 * use it here as a code reference
-	 */
-	spinlock_t qlock;
-	struct mutex lock;
-	u32 sequence;
-	struct vimc_stream stream;
-	struct media_pad pad;
-};
-
-static const struct v4l2_pix_format fmt_default = {
-	.width = 640,
-	.height = 480,
-	.pixelformat = V4L2_PIX_FMT_RGB24,
-	.field = V4L2_FIELD_NONE,
-	.colorspace = V4L2_COLORSPACE_DEFAULT,
-};
-
-struct vimc_cap_buffer {
-	/*
-	 * struct vb2_v4l2_buffer must be the first element
-	 * the videobuf2 framework will allocate this struct based on
-	 * buf_struct_size and use the first sizeof(struct vb2_buffer) bytes of
-	 * memory as a vb2_buffer
-	 */
-	struct vb2_v4l2_buffer vb2;
-	struct list_head list;
-};
-
-static int vimc_cap_querycap(struct file *file, void *priv,
-			     struct v4l2_capability *cap)
-{
-	strscpy(cap->driver, VIMC_PDEV_NAME, sizeof(cap->driver));
-	strscpy(cap->card, KBUILD_MODNAME, sizeof(cap->card));
-	snprintf(cap->bus_info, sizeof(cap->bus_info),
-		 "platform:%s", VIMC_PDEV_NAME);
-
-	return 0;
-}
-
-static void vimc_cap_get_format(struct vimc_ent_device *ved,
-				struct v4l2_pix_format *fmt)
-{
-	struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device,
-						    ved);
-
-	*fmt = vcap->format;
-}
-
-static int vimc_cap_g_fmt_vid_cap(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct vimc_cap_device *vcap = video_drvdata(file);
-
-	f->fmt.pix = vcap->format;
-
-	return 0;
-}
-
-static int vimc_cap_try_fmt_vid_cap(struct file *file, void *priv,
-				    struct v4l2_format *f)
-{
-	struct v4l2_pix_format *format = &f->fmt.pix;
-	const struct vimc_pix_map *vpix;
-
-	format->width = clamp_t(u32, format->width, VIMC_FRAME_MIN_WIDTH,
-				VIMC_FRAME_MAX_WIDTH) & ~1;
-	format->height = clamp_t(u32, format->height, VIMC_FRAME_MIN_HEIGHT,
-				 VIMC_FRAME_MAX_HEIGHT) & ~1;
-
-	/* Don't accept a pixelformat that is not on the table */
-	vpix = vimc_pix_map_by_pixelformat(format->pixelformat);
-	if (!vpix) {
-		format->pixelformat = fmt_default.pixelformat;
-		vpix = vimc_pix_map_by_pixelformat(format->pixelformat);
-	}
-	/* TODO: Add support for custom bytesperline values */
-	format->bytesperline = format->width * vpix->bpp;
-	format->sizeimage = format->bytesperline * format->height;
-
-	if (format->field == V4L2_FIELD_ANY)
-		format->field = fmt_default.field;
-
-	vimc_colorimetry_clamp(format);
-
-	return 0;
-}
-
-static int vimc_cap_s_fmt_vid_cap(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct vimc_cap_device *vcap = video_drvdata(file);
-	int ret;
-
-	/* Do not change the format while stream is on */
-	if (vb2_is_busy(&vcap->queue))
-		return -EBUSY;
-
-	ret = vimc_cap_try_fmt_vid_cap(file, priv, f);
-	if (ret)
-		return ret;
-
-	dev_dbg(vcap->ved.dev, "%s: format update: "
-		"old:%dx%d (0x%x, %d, %d, %d, %d) "
-		"new:%dx%d (0x%x, %d, %d, %d, %d)\n", vcap->vdev.name,
-		/* old */
-		vcap->format.width, vcap->format.height,
-		vcap->format.pixelformat, vcap->format.colorspace,
-		vcap->format.quantization, vcap->format.xfer_func,
-		vcap->format.ycbcr_enc,
-		/* new */
-		f->fmt.pix.width, f->fmt.pix.height,
-		f->fmt.pix.pixelformat,	f->fmt.pix.colorspace,
-		f->fmt.pix.quantization, f->fmt.pix.xfer_func,
-		f->fmt.pix.ycbcr_enc);
-
-	vcap->format = f->fmt.pix;
-
-	return 0;
-}
-
-static int vimc_cap_enum_fmt_vid_cap(struct file *file, void *priv,
-				     struct v4l2_fmtdesc *f)
-{
-	const struct vimc_pix_map *vpix = vimc_pix_map_by_index(f->index);
-
-	if (!vpix)
-		return -EINVAL;
-
-	f->pixelformat = vpix->pixelformat;
-
-	return 0;
-}
-
-static int vimc_cap_enum_framesizes(struct file *file, void *fh,
-				    struct v4l2_frmsizeenum *fsize)
-{
-	const struct vimc_pix_map *vpix;
-
-	if (fsize->index)
-		return -EINVAL;
-
-	/* Only accept code in the pix map table */
-	vpix = vimc_pix_map_by_code(fsize->pixel_format);
-	if (!vpix)
-		return -EINVAL;
-
-	fsize->type = V4L2_FRMSIZE_TYPE_CONTINUOUS;
-	fsize->stepwise.min_width = VIMC_FRAME_MIN_WIDTH;
-	fsize->stepwise.max_width = VIMC_FRAME_MAX_WIDTH;
-	fsize->stepwise.min_height = VIMC_FRAME_MIN_HEIGHT;
-	fsize->stepwise.max_height = VIMC_FRAME_MAX_HEIGHT;
-	fsize->stepwise.step_width = 1;
-	fsize->stepwise.step_height = 1;
-
-	return 0;
-}
-
-static const struct v4l2_file_operations vimc_cap_fops = {
-	.owner		= THIS_MODULE,
-	.open		= v4l2_fh_open,
-	.release	= vb2_fop_release,
-	.read           = vb2_fop_read,
-	.poll		= vb2_fop_poll,
-	.unlocked_ioctl = video_ioctl2,
-	.mmap           = vb2_fop_mmap,
-};
-
-static const struct v4l2_ioctl_ops vimc_cap_ioctl_ops = {
-	.vidioc_querycap = vimc_cap_querycap,
-
-	.vidioc_g_fmt_vid_cap = vimc_cap_g_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vimc_cap_s_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap = vimc_cap_try_fmt_vid_cap,
-	.vidioc_enum_fmt_vid_cap = vimc_cap_enum_fmt_vid_cap,
-	.vidioc_enum_framesizes = vimc_cap_enum_framesizes,
-
-	.vidioc_reqbufs = vb2_ioctl_reqbufs,
-	.vidioc_create_bufs = vb2_ioctl_create_bufs,
-	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
-	.vidioc_querybuf = vb2_ioctl_querybuf,
-	.vidioc_qbuf = vb2_ioctl_qbuf,
-	.vidioc_dqbuf = vb2_ioctl_dqbuf,
-	.vidioc_expbuf = vb2_ioctl_expbuf,
-	.vidioc_streamon = vb2_ioctl_streamon,
-	.vidioc_streamoff = vb2_ioctl_streamoff,
-};
-
-static void vimc_cap_return_all_buffers(struct vimc_cap_device *vcap,
-					enum vb2_buffer_state state)
-{
-	struct vimc_cap_buffer *vbuf, *node;
-
-	spin_lock(&vcap->qlock);
-
-	list_for_each_entry_safe(vbuf, node, &vcap->buf_list, list) {
-		list_del(&vbuf->list);
-		vb2_buffer_done(&vbuf->vb2.vb2_buf, state);
-	}
-
-	spin_unlock(&vcap->qlock);
-}
-
-static int vimc_cap_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
-	struct vimc_cap_device *vcap = vb2_get_drv_priv(vq);
-	struct media_entity *entity = &vcap->vdev.entity;
-	int ret;
-
-	vcap->sequence = 0;
-
-	/* Start the media pipeline */
-	ret = media_pipeline_start(entity, &vcap->stream.pipe);
-	if (ret) {
-		vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED);
-		return ret;
-	}
-
-	ret = vimc_streamer_s_stream(&vcap->stream, &vcap->ved, 1);
-	if (ret) {
-		media_pipeline_stop(entity);
-		vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED);
-		return ret;
-	}
-
-	return 0;
-}
-
-/*
- * Stop the stream engine. Any remaining buffers in the stream queue are
- * dequeued and passed on to the vb2 framework marked as STATE_ERROR.
- */
-static void vimc_cap_stop_streaming(struct vb2_queue *vq)
-{
-	struct vimc_cap_device *vcap = vb2_get_drv_priv(vq);
-
-	vimc_streamer_s_stream(&vcap->stream, &vcap->ved, 0);
-
-	/* Stop the media pipeline */
-	media_pipeline_stop(&vcap->vdev.entity);
-
-	/* Release all active buffers */
-	vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_ERROR);
-}
-
-static void vimc_cap_buf_queue(struct vb2_buffer *vb2_buf)
-{
-	struct vimc_cap_device *vcap = vb2_get_drv_priv(vb2_buf->vb2_queue);
-	struct vimc_cap_buffer *buf = container_of(vb2_buf,
-						   struct vimc_cap_buffer,
-						   vb2.vb2_buf);
-
-	spin_lock(&vcap->qlock);
-	list_add_tail(&buf->list, &vcap->buf_list);
-	spin_unlock(&vcap->qlock);
-}
-
-static int vimc_cap_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-				unsigned int *nplanes, unsigned int sizes[],
-				struct device *alloc_devs[])
-{
-	struct vimc_cap_device *vcap = vb2_get_drv_priv(vq);
-
-	if (*nplanes)
-		return sizes[0] < vcap->format.sizeimage ? -EINVAL : 0;
-	/* We don't support multiplanes for now */
-	*nplanes = 1;
-	sizes[0] = vcap->format.sizeimage;
-
-	return 0;
-}
-
-static int vimc_cap_buffer_prepare(struct vb2_buffer *vb)
-{
-	struct vimc_cap_device *vcap = vb2_get_drv_priv(vb->vb2_queue);
-	unsigned long size = vcap->format.sizeimage;
-
-	if (vb2_plane_size(vb, 0) < size) {
-		dev_err(vcap->ved.dev, "%s: buffer too small (%lu < %lu)\n",
-			vcap->vdev.name, vb2_plane_size(vb, 0), size);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static const struct vb2_ops vimc_cap_qops = {
-	.start_streaming	= vimc_cap_start_streaming,
-	.stop_streaming		= vimc_cap_stop_streaming,
-	.buf_queue		= vimc_cap_buf_queue,
-	.queue_setup		= vimc_cap_queue_setup,
-	.buf_prepare		= vimc_cap_buffer_prepare,
-	/*
-	 * Since q->lock is set we can use the standard
-	 * vb2_ops_wait_prepare/finish helper functions.
-	 */
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
-};
-
-static const struct media_entity_operations vimc_cap_mops = {
-	.link_validate		= vimc_vdev_link_validate,
-};
-
-void vimc_cap_release(struct vimc_ent_device *ved)
-{
-	struct vimc_cap_device *vcap =
-		container_of(ved, struct vimc_cap_device, ved);
-
-	media_entity_cleanup(vcap->ved.ent);
-	kfree(vcap);
-}
-
-void vimc_cap_unregister(struct vimc_ent_device *ved)
-{
-	struct vimc_cap_device *vcap =
-		container_of(ved, struct vimc_cap_device, ved);
-
-	vb2_queue_release(&vcap->queue);
-	video_unregister_device(&vcap->vdev);
-}
-
-static void *vimc_cap_process_frame(struct vimc_ent_device *ved,
-				    const void *frame)
-{
-	struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device,
-						    ved);
-	struct vimc_cap_buffer *vimc_buf;
-	void *vbuf;
-
-	spin_lock(&vcap->qlock);
-
-	/* Get the first entry of the list */
-	vimc_buf = list_first_entry_or_null(&vcap->buf_list,
-					    typeof(*vimc_buf), list);
-	if (!vimc_buf) {
-		spin_unlock(&vcap->qlock);
-		return ERR_PTR(-EAGAIN);
-	}
-
-	/* Remove this entry from the list */
-	list_del(&vimc_buf->list);
-
-	spin_unlock(&vcap->qlock);
-
-	/* Fill the buffer */
-	vimc_buf->vb2.vb2_buf.timestamp = ktime_get_ns();
-	vimc_buf->vb2.sequence = vcap->sequence++;
-	vimc_buf->vb2.field = vcap->format.field;
-
-	vbuf = vb2_plane_vaddr(&vimc_buf->vb2.vb2_buf, 0);
-
-	memcpy(vbuf, frame, vcap->format.sizeimage);
-
-	/* Set it as ready */
-	vb2_set_plane_payload(&vimc_buf->vb2.vb2_buf, 0,
-			      vcap->format.sizeimage);
-	vb2_buffer_done(&vimc_buf->vb2.vb2_buf, VB2_BUF_STATE_DONE);
-	return NULL;
-}
-
-struct vimc_ent_device *vimc_cap_add(struct vimc_device *vimc,
-				     const char *vcfg_name)
-{
-	struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
-	const struct vimc_pix_map *vpix;
-	struct vimc_cap_device *vcap;
-	struct video_device *vdev;
-	struct vb2_queue *q;
-	int ret;
-
-	/* Allocate the vimc_cap_device struct */
-	vcap = kzalloc(sizeof(*vcap), GFP_KERNEL);
-	if (!vcap)
-		return NULL;
-
-	/* Initialize the media entity */
-	vcap->vdev.entity.name = vcfg_name;
-	vcap->vdev.entity.function = MEDIA_ENT_F_IO_V4L;
-	vcap->pad.flags = MEDIA_PAD_FL_SINK;
-	ret = media_entity_pads_init(&vcap->vdev.entity,
-				     1, &vcap->pad);
-	if (ret)
-		goto err_free_vcap;
-
-	/* Initialize the lock */
-	mutex_init(&vcap->lock);
-
-	/* Initialize the vb2 queue */
-	q = &vcap->queue;
-	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_USERPTR;
-	q->drv_priv = vcap;
-	q->buf_struct_size = sizeof(struct vimc_cap_buffer);
-	q->ops = &vimc_cap_qops;
-	q->mem_ops = &vb2_vmalloc_memops;
-	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
-	q->min_buffers_needed = 2;
-	q->lock = &vcap->lock;
-
-	ret = vb2_queue_init(q);
-	if (ret) {
-		dev_err(vimc->mdev.dev, "%s: vb2 queue init failed (err=%d)\n",
-			vcfg_name, ret);
-		goto err_clean_m_ent;
-	}
-
-	/* Initialize buffer list and its lock */
-	INIT_LIST_HEAD(&vcap->buf_list);
-	spin_lock_init(&vcap->qlock);
-
-	/* Set default frame format */
-	vcap->format = fmt_default;
-	vpix = vimc_pix_map_by_pixelformat(vcap->format.pixelformat);
-	vcap->format.bytesperline = vcap->format.width * vpix->bpp;
-	vcap->format.sizeimage = vcap->format.bytesperline *
-				 vcap->format.height;
-
-	/* Fill the vimc_ent_device struct */
-	vcap->ved.ent = &vcap->vdev.entity;
-	vcap->ved.process_frame = vimc_cap_process_frame;
-	vcap->ved.vdev_get_format = vimc_cap_get_format;
-	vcap->ved.dev = vimc->mdev.dev;
-
-	/* Initialize the video_device struct */
-	vdev = &vcap->vdev;
-	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-	vdev->entity.ops = &vimc_cap_mops;
-	vdev->release = video_device_release_empty;
-	vdev->fops = &vimc_cap_fops;
-	vdev->ioctl_ops = &vimc_cap_ioctl_ops;
-	vdev->lock = &vcap->lock;
-	vdev->queue = q;
-	vdev->v4l2_dev = v4l2_dev;
-	vdev->vfl_dir = VFL_DIR_RX;
-	strscpy(vdev->name, vcfg_name, sizeof(vdev->name));
-	video_set_drvdata(vdev, &vcap->ved);
-
-	/* Register the video_device with the v4l2 and the media framework */
-	ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
-	if (ret) {
-		dev_err(vimc->mdev.dev, "%s: video register failed (err=%d)\n",
-			vcap->vdev.name, ret);
-		goto err_release_queue;
-	}
-
-	return &vcap->ved;
-
-err_release_queue:
-	vb2_queue_release(q);
-err_clean_m_ent:
-	media_entity_cleanup(&vcap->vdev.entity);
-err_free_vcap:
-	kfree(vcap);
-
-	return NULL;
-}
diff --git a/drivers/media/platform/vimc/vimc-common.c b/drivers/media/platform/vimc/vimc-common.c
deleted file mode 100644
index c95c17c048f2..000000000000
--- a/drivers/media/platform/vimc/vimc-common.c
+++ /dev/null
@@ -1,369 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * vimc-common.c Virtual Media Controller Driver
- *
- * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include "vimc-common.h"
-
-/*
- * NOTE: non-bayer formats need to come first (necessary for enum_mbus_code
- * in the scaler)
- */
-static const struct vimc_pix_map vimc_pix_map_list[] = {
-	/* TODO: add all missing formats */
-
-	/* RGB formats */
-	{
-		.code = MEDIA_BUS_FMT_BGR888_1X24,
-		.pixelformat = V4L2_PIX_FMT_BGR24,
-		.bpp = 3,
-		.bayer = false,
-	},
-	{
-		.code = MEDIA_BUS_FMT_RGB888_1X24,
-		.pixelformat = V4L2_PIX_FMT_RGB24,
-		.bpp = 3,
-		.bayer = false,
-	},
-	{
-		.code = MEDIA_BUS_FMT_ARGB8888_1X32,
-		.pixelformat = V4L2_PIX_FMT_ARGB32,
-		.bpp = 4,
-		.bayer = false,
-	},
-
-	/* Bayer formats */
-	{
-		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SBGGR8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SGBRG8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SGRBG8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SRGGB8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
-		.pixelformat = V4L2_PIX_FMT_SBGGR10,
-		.bpp = 2,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
-		.pixelformat = V4L2_PIX_FMT_SGBRG10,
-		.bpp = 2,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
-		.pixelformat = V4L2_PIX_FMT_SGRBG10,
-		.bpp = 2,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
-		.pixelformat = V4L2_PIX_FMT_SRGGB10,
-		.bpp = 2,
-		.bayer = true,
-	},
-
-	/* 10bit raw bayer a-law compressed to 8 bits */
-	{
-		.code = MEDIA_BUS_FMT_SBGGR10_ALAW8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SBGGR10ALAW8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGBRG10_ALAW8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SGBRG10ALAW8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SGRBG10ALAW8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SRGGB10_ALAW8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SRGGB10ALAW8,
-		.bpp = 1,
-		.bayer = true,
-	},
-
-	/* 10bit raw bayer DPCM compressed to 8 bits */
-	{
-		.code = MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SBGGR10DPCM8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SGBRG10DPCM8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8,
-		.pixelformat = V4L2_PIX_FMT_SRGGB10DPCM8,
-		.bpp = 1,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
-		.pixelformat = V4L2_PIX_FMT_SBGGR12,
-		.bpp = 2,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
-		.pixelformat = V4L2_PIX_FMT_SGBRG12,
-		.bpp = 2,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
-		.pixelformat = V4L2_PIX_FMT_SGRBG12,
-		.bpp = 2,
-		.bayer = true,
-	},
-	{
-		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
-		.pixelformat = V4L2_PIX_FMT_SRGGB12,
-		.bpp = 2,
-		.bayer = true,
-	},
-};
-
-bool vimc_is_source(struct media_entity *ent)
-{
-	unsigned int i;
-
-	for (i = 0; i < ent->num_pads; i++)
-		if (ent->pads[i].flags & MEDIA_PAD_FL_SINK)
-			return false;
-	return true;
-}
-
-const struct vimc_pix_map *vimc_pix_map_by_index(unsigned int i)
-{
-	if (i >= ARRAY_SIZE(vimc_pix_map_list))
-		return NULL;
-
-	return &vimc_pix_map_list[i];
-}
-
-const struct vimc_pix_map *vimc_pix_map_by_code(u32 code)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(vimc_pix_map_list); i++) {
-		if (vimc_pix_map_list[i].code == code)
-			return &vimc_pix_map_list[i];
-	}
-	return NULL;
-}
-
-const struct vimc_pix_map *vimc_pix_map_by_pixelformat(u32 pixelformat)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(vimc_pix_map_list); i++) {
-		if (vimc_pix_map_list[i].pixelformat == pixelformat)
-			return &vimc_pix_map_list[i];
-	}
-	return NULL;
-}
-
-static int vimc_get_pix_format(struct media_pad *pad,
-			       struct v4l2_pix_format *fmt)
-{
-	if (is_media_entity_v4l2_subdev(pad->entity)) {
-		struct v4l2_subdev *sd =
-			media_entity_to_v4l2_subdev(pad->entity);
-		struct v4l2_subdev_format sd_fmt;
-		const struct vimc_pix_map *pix_map;
-		int ret;
-
-		sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-		sd_fmt.pad = pad->index;
-
-		ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &sd_fmt);
-		if (ret)
-			return ret;
-
-		v4l2_fill_pix_format(fmt, &sd_fmt.format);
-		pix_map = vimc_pix_map_by_code(sd_fmt.format.code);
-		fmt->pixelformat = pix_map->pixelformat;
-	} else if (is_media_entity_v4l2_video_device(pad->entity)) {
-		struct video_device *vdev = container_of(pad->entity,
-							 struct video_device,
-							 entity);
-		struct vimc_ent_device *ved = video_get_drvdata(vdev);
-
-		if (!ved->vdev_get_format)
-			return -ENOIOCTLCMD;
-
-		ved->vdev_get_format(ved, fmt);
-	} else {
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-int vimc_vdev_link_validate(struct media_link *link)
-{
-	struct v4l2_pix_format source_fmt, sink_fmt;
-	int ret;
-
-	ret = vimc_get_pix_format(link->source, &source_fmt);
-	if (ret)
-		return ret;
-
-	ret = vimc_get_pix_format(link->sink, &sink_fmt);
-	if (ret)
-		return ret;
-
-	pr_info("vimc link validate: "
-		"%s:src:%dx%d (0x%x, %d, %d, %d, %d) "
-		"%s:snk:%dx%d (0x%x, %d, %d, %d, %d)\n",
-		/* src */
-		link->source->entity->name,
-		source_fmt.width, source_fmt.height,
-		source_fmt.pixelformat, source_fmt.colorspace,
-		source_fmt.quantization, source_fmt.xfer_func,
-		source_fmt.ycbcr_enc,
-		/* sink */
-		link->sink->entity->name,
-		sink_fmt.width, sink_fmt.height,
-		sink_fmt.pixelformat, sink_fmt.colorspace,
-		sink_fmt.quantization, sink_fmt.xfer_func,
-		sink_fmt.ycbcr_enc);
-
-	/* The width, height and pixelformat must match. */
-	if (source_fmt.width != sink_fmt.width ||
-	    source_fmt.height != sink_fmt.height ||
-	    source_fmt.pixelformat != sink_fmt.pixelformat)
-		return -EPIPE;
-
-	/*
-	 * The field order must match, or the sink field order must be NONE
-	 * to support interlaced hardware connected to bridges that support
-	 * progressive formats only.
-	 */
-	if (source_fmt.field != sink_fmt.field &&
-	    sink_fmt.field != V4L2_FIELD_NONE)
-		return -EPIPE;
-
-	/*
-	 * If colorspace is DEFAULT, then assume all the colorimetry is also
-	 * DEFAULT, return 0 to skip comparing the other colorimetry parameters
-	 */
-	if (source_fmt.colorspace == V4L2_COLORSPACE_DEFAULT ||
-	    sink_fmt.colorspace == V4L2_COLORSPACE_DEFAULT)
-		return 0;
-
-	/* Colorspace must match. */
-	if (source_fmt.colorspace != sink_fmt.colorspace)
-		return -EPIPE;
-
-	/* Colorimetry must match if they are not set to DEFAULT */
-	if (source_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT &&
-	    sink_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT &&
-	    source_fmt.ycbcr_enc != sink_fmt.ycbcr_enc)
-		return -EPIPE;
-
-	if (source_fmt.quantization != V4L2_QUANTIZATION_DEFAULT &&
-	    sink_fmt.quantization != V4L2_QUANTIZATION_DEFAULT &&
-	    source_fmt.quantization != sink_fmt.quantization)
-		return -EPIPE;
-
-	if (source_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT &&
-	    sink_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT &&
-	    source_fmt.xfer_func != sink_fmt.xfer_func)
-		return -EPIPE;
-
-	return 0;
-}
-
-static const struct media_entity_operations vimc_ent_sd_mops = {
-	.link_validate = v4l2_subdev_link_validate,
-};
-
-int vimc_ent_sd_register(struct vimc_ent_device *ved,
-			 struct v4l2_subdev *sd,
-			 struct v4l2_device *v4l2_dev,
-			 const char *const name,
-			 u32 function,
-			 u16 num_pads,
-			 struct media_pad *pads,
-			 const struct v4l2_subdev_ops *sd_ops)
-{
-	int ret;
-
-	/* Fill the vimc_ent_device struct */
-	ved->ent = &sd->entity;
-
-	/* Initialize the subdev */
-	v4l2_subdev_init(sd, sd_ops);
-	sd->entity.function = function;
-	sd->entity.ops = &vimc_ent_sd_mops;
-	sd->owner = THIS_MODULE;
-	strscpy(sd->name, name, sizeof(sd->name));
-	v4l2_set_subdevdata(sd, ved);
-
-	/* Expose this subdev to user space */
-	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-	if (sd->ctrl_handler)
-		sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS;
-
-	/* Initialize the media entity */
-	ret = media_entity_pads_init(&sd->entity, num_pads, pads);
-	if (ret)
-		return ret;
-
-	/* Register the subdev with the v4l2 and the media framework */
-	ret = v4l2_device_register_subdev(v4l2_dev, sd);
-	if (ret) {
-		dev_err(v4l2_dev->dev,
-			"%s: subdev register failed (err=%d)\n",
-			name, ret);
-		goto err_clean_m_ent;
-	}
-
-	return 0;
-
-err_clean_m_ent:
-	media_entity_cleanup(&sd->entity);
-	return ret;
-}
diff --git a/drivers/media/platform/vimc/vimc-common.h b/drivers/media/platform/vimc/vimc-common.h
deleted file mode 100644
index 616d5a6b0754..000000000000
--- a/drivers/media/platform/vimc/vimc-common.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * vimc-common.h Virtual Media Controller Driver
- *
- * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
- */
-
-#ifndef _VIMC_COMMON_H_
-#define _VIMC_COMMON_H_
-
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <media/media-device.h>
-#include <media/v4l2-device.h>
-
-#define VIMC_PDEV_NAME "vimc"
-
-/* VIMC-specific controls */
-#define VIMC_CID_VIMC_BASE		(0x00f00000 | 0xf000)
-#define VIMC_CID_VIMC_CLASS		(0x00f00000 | 1)
-#define VIMC_CID_TEST_PATTERN		(VIMC_CID_VIMC_BASE + 0)
-#define VIMC_CID_MEAN_WIN_SIZE		(VIMC_CID_VIMC_BASE + 1)
-
-#define VIMC_FRAME_MAX_WIDTH 4096
-#define VIMC_FRAME_MAX_HEIGHT 2160
-#define VIMC_FRAME_MIN_WIDTH 16
-#define VIMC_FRAME_MIN_HEIGHT 16
-
-#define VIMC_FRAME_INDEX(lin, col, width, bpp) ((lin * width + col) * bpp)
-
-/* Source and sink pad checks */
-#define VIMC_IS_SRC(pad)	(pad)
-#define VIMC_IS_SINK(pad)	(!(pad))
-
-/**
- * struct vimc_colorimetry_clamp - Adjust colorimetry parameters
- *
- * @fmt:		the pointer to struct v4l2_pix_format or
- *			struct v4l2_mbus_framefmt
- *
- * Entities must check if colorimetry given by the userspace is valid, if not
- * then set them as DEFAULT
- */
-#define vimc_colorimetry_clamp(fmt)					\
-do {									\
-	if ((fmt)->colorspace == V4L2_COLORSPACE_DEFAULT		\
-	    || (fmt)->colorspace > V4L2_COLORSPACE_DCI_P3) {		\
-		(fmt)->colorspace = V4L2_COLORSPACE_DEFAULT;		\
-		(fmt)->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;		\
-		(fmt)->quantization = V4L2_QUANTIZATION_DEFAULT;	\
-		(fmt)->xfer_func = V4L2_XFER_FUNC_DEFAULT;		\
-	}								\
-	if ((fmt)->ycbcr_enc > V4L2_YCBCR_ENC_SMPTE240M)		\
-		(fmt)->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;		\
-	if ((fmt)->quantization > V4L2_QUANTIZATION_LIM_RANGE)		\
-		(fmt)->quantization = V4L2_QUANTIZATION_DEFAULT;	\
-	if ((fmt)->xfer_func > V4L2_XFER_FUNC_SMPTE2084)		\
-		(fmt)->xfer_func = V4L2_XFER_FUNC_DEFAULT;		\
-} while (0)
-
-/**
- * struct vimc_pix_map - maps media bus code with v4l2 pixel format
- *
- * @code:		media bus format code defined by MEDIA_BUS_FMT_* macros
- * @bbp:		number of bytes each pixel occupies
- * @pixelformat:	pixel format devined by V4L2_PIX_FMT_* macros
- *
- * Struct which matches the MEDIA_BUS_FMT_* codes with the corresponding
- * V4L2_PIX_FMT_* fourcc pixelformat and its bytes per pixel (bpp)
- */
-struct vimc_pix_map {
-	unsigned int code;
-	unsigned int bpp;
-	u32 pixelformat;
-	bool bayer;
-};
-
-/**
- * struct vimc_ent_device - core struct that represents an entity in the
- * topology
- *
- * @dev:		a pointer of the device struct of the driver
- * @ent:		the pointer to struct media_entity for the node
- * @process_frame:	callback send a frame to that node
- * @vdev_get_format:	callback that returns the current format a pad, used
- *			only when is_media_entity_v4l2_video_device(ent) returns
- *			true
- *
- * Each node of the topology must create a vimc_ent_device struct. Depending on
- * the node it will be of an instance of v4l2_subdev or video_device struct
- * where both contains a struct media_entity.
- * Those structures should embedded the vimc_ent_device struct through
- * v4l2_set_subdevdata() and video_set_drvdata() respectivaly, allowing the
- * vimc_ent_device struct to be retrieved from the corresponding struct
- * media_entity
- */
-struct vimc_ent_device {
-	struct device *dev;
-	struct media_entity *ent;
-	void * (*process_frame)(struct vimc_ent_device *ved,
-				const void *frame);
-	void (*vdev_get_format)(struct vimc_ent_device *ved,
-			      struct v4l2_pix_format *fmt);
-};
-
-/**
- * struct vimc_device - main device for vimc driver
- *
- * @pipe_cfg	pointer to the vimc pipeline configuration structure
- * @ent_devs	array of vimc_ent_device pointers
- * @mdev	the associated media_device parent
- * @v4l2_dev	Internal v4l2 parent device
- */
-struct vimc_device {
-	const struct vimc_pipeline_config *pipe_cfg;
-	struct vimc_ent_device **ent_devs;
-	struct media_device mdev;
-	struct v4l2_device v4l2_dev;
-};
-
-/**
- * struct vimc_ent_config	Structure which describes individual
- *				configuration for each entity
- *
- * @name			entity name
- * @ved				pointer to vimc_ent_device (a node in the
- *					topology)
- * @add				initializes and registers
- *					vim entity - called from vimc-core
- * @unregister			unregisters vimc entity - called from vimc-core
- * @release			releases vimc entity - called from the v4l2_dev
- *					release callback
- */
-struct vimc_ent_config {
-	const char *name;
-	struct vimc_ent_device *(*add)(struct vimc_device *vimc,
-				       const char *vcfg_name);
-	void (*unregister)(struct vimc_ent_device *ved);
-	void (*release)(struct vimc_ent_device *ved);
-};
-
-/**
- * vimc_is_source - returns true if the entity has only source pads
- *
- * @ent: pointer to &struct media_entity
- *
- */
-bool vimc_is_source(struct media_entity *ent);
-
-/* prototypes for vimc_ent_config hooks */
-struct vimc_ent_device *vimc_cap_add(struct vimc_device *vimc,
-				     const char *vcfg_name);
-void vimc_cap_unregister(struct vimc_ent_device *ved);
-void vimc_cap_release(struct vimc_ent_device *ved);
-
-struct vimc_ent_device *vimc_deb_add(struct vimc_device *vimc,
-				     const char *vcfg_name);
-void vimc_deb_release(struct vimc_ent_device *ved);
-
-struct vimc_ent_device *vimc_sca_add(struct vimc_device *vimc,
-				     const char *vcfg_name);
-void vimc_sca_release(struct vimc_ent_device *ved);
-
-struct vimc_ent_device *vimc_sen_add(struct vimc_device *vimc,
-				     const char *vcfg_name);
-void vimc_sen_release(struct vimc_ent_device *ved);
-
-/**
- * vimc_pix_map_by_index - get vimc_pix_map struct by its index
- *
- * @i:			index of the vimc_pix_map struct in vimc_pix_map_list
- */
-const struct vimc_pix_map *vimc_pix_map_by_index(unsigned int i);
-
-/**
- * vimc_pix_map_by_code - get vimc_pix_map struct by media bus code
- *
- * @code:		media bus format code defined by MEDIA_BUS_FMT_* macros
- */
-const struct vimc_pix_map *vimc_pix_map_by_code(u32 code);
-
-/**
- * vimc_pix_map_by_pixelformat - get vimc_pix_map struct by v4l2 pixel format
- *
- * @pixelformat:	pixel format devined by V4L2_PIX_FMT_* macros
- */
-const struct vimc_pix_map *vimc_pix_map_by_pixelformat(u32 pixelformat);
-
-/**
- * vimc_ent_sd_register - initialize and register a subdev node
- *
- * @ved:	the vimc_ent_device struct to be initialize
- * @sd:		the v4l2_subdev struct to be initialize and registered
- * @v4l2_dev:	the v4l2 device to register the v4l2_subdev
- * @name:	name of the sub-device. Please notice that the name must be
- *		unique.
- * @function:	media entity function defined by MEDIA_ENT_F_* macros
- * @num_pads:	number of pads to initialize
- * @pads:	the array of pads of the entity, the caller should set the
-		flags of the pads
- * @sd_ops:	pointer to &struct v4l2_subdev_ops.
- *
- * Helper function initialize and register the struct vimc_ent_device and struct
- * v4l2_subdev which represents a subdev node in the topology
- */
-int vimc_ent_sd_register(struct vimc_ent_device *ved,
-			 struct v4l2_subdev *sd,
-			 struct v4l2_device *v4l2_dev,
-			 const char *const name,
-			 u32 function,
-			 u16 num_pads,
-			 struct media_pad *pads,
-			 const struct v4l2_subdev_ops *sd_ops);
-
-/**
- * vimc_vdev_link_validate - validates a media link
- *
- * @link: pointer to &struct media_link
- *
- * This function calls validates if a media link is valid for streaming.
- */
-int vimc_vdev_link_validate(struct media_link *link);
-
-#endif
diff --git a/drivers/media/platform/vimc/vimc-core.c b/drivers/media/platform/vimc/vimc-core.c
deleted file mode 100644
index 339126e565dc..000000000000
--- a/drivers/media/platform/vimc/vimc-core.c
+++ /dev/null
@@ -1,381 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * vimc-core.c Virtual Media Controller Driver
- *
- * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <media/media-device.h>
-#include <media/v4l2-device.h>
-
-#include "vimc-common.h"
-
-#define VIMC_MDEV_MODEL_NAME "VIMC MDEV"
-
-#define VIMC_ENT_LINK(src, srcpad, sink, sinkpad, link_flags) {	\
-	.src_ent = src,						\
-	.src_pad = srcpad,					\
-	.sink_ent = sink,					\
-	.sink_pad = sinkpad,					\
-	.flags = link_flags,					\
-}
-
-/* Structure which describes links between entities */
-struct vimc_ent_link {
-	unsigned int src_ent;
-	u16 src_pad;
-	unsigned int sink_ent;
-	u16 sink_pad;
-	u32 flags;
-};
-
-/* Structure which describes the whole topology */
-struct vimc_pipeline_config {
-	const struct vimc_ent_config *ents;
-	size_t num_ents;
-	const struct vimc_ent_link *links;
-	size_t num_links;
-};
-
-/* --------------------------------------------------------------------------
- * Topology Configuration
- */
-
-static struct vimc_ent_config ent_config[] = {
-	{
-		.name = "Sensor A",
-		.add = vimc_sen_add,
-		.release = vimc_sen_release,
-	},
-	{
-		.name = "Sensor B",
-		.add = vimc_sen_add,
-		.release = vimc_sen_release,
-	},
-	{
-		.name = "Debayer A",
-		.add = vimc_deb_add,
-		.release = vimc_deb_release,
-	},
-	{
-		.name = "Debayer B",
-		.add = vimc_deb_add,
-		.release = vimc_deb_release,
-	},
-	{
-		.name = "Raw Capture 0",
-		.add = vimc_cap_add,
-		.unregister = vimc_cap_unregister,
-		.release = vimc_cap_release,
-	},
-	{
-		.name = "Raw Capture 1",
-		.add = vimc_cap_add,
-		.unregister = vimc_cap_unregister,
-		.release = vimc_cap_release,
-	},
-	{
-		/* TODO: change this to vimc-input when it is implemented */
-		.name = "RGB/YUV Input",
-		.add = vimc_sen_add,
-		.release = vimc_sen_release,
-	},
-	{
-		.name = "Scaler",
-		.add = vimc_sca_add,
-		.release = vimc_sca_release,
-	},
-	{
-		.name = "RGB/YUV Capture",
-		.add = vimc_cap_add,
-		.unregister = vimc_cap_unregister,
-		.release = vimc_cap_release,
-	},
-};
-
-static const struct vimc_ent_link ent_links[] = {
-	/* Link: Sensor A (Pad 0)->(Pad 0) Debayer A */
-	VIMC_ENT_LINK(0, 0, 2, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
-	/* Link: Sensor A (Pad 0)->(Pad 0) Raw Capture 0 */
-	VIMC_ENT_LINK(0, 0, 4, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
-	/* Link: Sensor B (Pad 0)->(Pad 0) Debayer B */
-	VIMC_ENT_LINK(1, 0, 3, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
-	/* Link: Sensor B (Pad 0)->(Pad 0) Raw Capture 1 */
-	VIMC_ENT_LINK(1, 0, 5, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
-	/* Link: Debayer A (Pad 1)->(Pad 0) Scaler */
-	VIMC_ENT_LINK(2, 1, 7, 0, MEDIA_LNK_FL_ENABLED),
-	/* Link: Debayer B (Pad 1)->(Pad 0) Scaler */
-	VIMC_ENT_LINK(3, 1, 7, 0, 0),
-	/* Link: RGB/YUV Input (Pad 0)->(Pad 0) Scaler */
-	VIMC_ENT_LINK(6, 0, 7, 0, 0),
-	/* Link: Scaler (Pad 1)->(Pad 0) RGB/YUV Capture */
-	VIMC_ENT_LINK(7, 1, 8, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
-};
-
-static struct vimc_pipeline_config pipe_cfg = {
-	.ents		= ent_config,
-	.num_ents	= ARRAY_SIZE(ent_config),
-	.links		= ent_links,
-	.num_links	= ARRAY_SIZE(ent_links)
-};
-
-/* -------------------------------------------------------------------------- */
-
-static void vimc_rm_links(struct vimc_device *vimc)
-{
-	unsigned int i;
-
-	for (i = 0; i < vimc->pipe_cfg->num_ents; i++)
-		media_entity_remove_links(vimc->ent_devs[i]->ent);
-}
-
-static int vimc_create_links(struct vimc_device *vimc)
-{
-	unsigned int i;
-	int ret;
-
-	/* Initialize the links between entities */
-	for (i = 0; i < vimc->pipe_cfg->num_links; i++) {
-		const struct vimc_ent_link *link = &vimc->pipe_cfg->links[i];
-
-		struct vimc_ent_device *ved_src =
-			vimc->ent_devs[link->src_ent];
-		struct vimc_ent_device *ved_sink =
-			vimc->ent_devs[link->sink_ent];
-
-		ret = media_create_pad_link(ved_src->ent, link->src_pad,
-					    ved_sink->ent, link->sink_pad,
-					    link->flags);
-		if (ret)
-			goto err_rm_links;
-	}
-
-	return 0;
-
-err_rm_links:
-	vimc_rm_links(vimc);
-	return ret;
-}
-
-static int vimc_add_subdevs(struct vimc_device *vimc)
-{
-	unsigned int i;
-
-	for (i = 0; i < vimc->pipe_cfg->num_ents; i++) {
-		dev_dbg(vimc->mdev.dev, "new entity for %s\n",
-			vimc->pipe_cfg->ents[i].name);
-		vimc->ent_devs[i] = vimc->pipe_cfg->ents[i].add(vimc,
-					vimc->pipe_cfg->ents[i].name);
-		if (!vimc->ent_devs[i]) {
-			dev_err(vimc->mdev.dev, "add new entity for %s\n",
-				vimc->pipe_cfg->ents[i].name);
-			return -EINVAL;
-		}
-	}
-	return 0;
-}
-
-static void vimc_release_subdevs(struct vimc_device *vimc)
-{
-	unsigned int i;
-
-	for (i = 0; i < vimc->pipe_cfg->num_ents; i++)
-		if (vimc->ent_devs[i])
-			vimc->pipe_cfg->ents[i].release(vimc->ent_devs[i]);
-}
-
-static void vimc_unregister_subdevs(struct vimc_device *vimc)
-{
-	unsigned int i;
-
-	for (i = 0; i < vimc->pipe_cfg->num_ents; i++)
-		if (vimc->ent_devs[i] && vimc->pipe_cfg->ents[i].unregister)
-			vimc->pipe_cfg->ents[i].unregister(vimc->ent_devs[i]);
-}
-
-static void vimc_v4l2_dev_release(struct v4l2_device *v4l2_dev)
-{
-	struct vimc_device *vimc =
-		container_of(v4l2_dev, struct vimc_device, v4l2_dev);
-
-	vimc_release_subdevs(vimc);
-	media_device_cleanup(&vimc->mdev);
-	kfree(vimc->ent_devs);
-	kfree(vimc);
-}
-
-static int vimc_register_devices(struct vimc_device *vimc)
-{
-	int ret;
-
-	/* Register the v4l2 struct */
-	ret = v4l2_device_register(vimc->mdev.dev, &vimc->v4l2_dev);
-	if (ret) {
-		dev_err(vimc->mdev.dev,
-			"v4l2 device register failed (err=%d)\n", ret);
-		return ret;
-	}
-	/* allocate ent_devs */
-	vimc->ent_devs = kcalloc(vimc->pipe_cfg->num_ents,
-				 sizeof(*vimc->ent_devs), GFP_KERNEL);
-	if (!vimc->ent_devs) {
-		ret = -ENOMEM;
-		goto err_v4l2_unregister;
-	}
-
-	/* Invoke entity config hooks to initialize and register subdevs */
-	ret = vimc_add_subdevs(vimc);
-	if (ret)
-		/* remove sundevs that got added */
-		goto err_rm_subdevs;
-
-	/* Initialize links */
-	ret = vimc_create_links(vimc);
-	if (ret)
-		goto err_rm_subdevs;
-
-	/* Register the media device */
-	ret = media_device_register(&vimc->mdev);
-	if (ret) {
-		dev_err(vimc->mdev.dev,
-			"media device register failed (err=%d)\n", ret);
-		goto err_rm_subdevs;
-	}
-
-	/* Expose all subdev's nodes*/
-	ret = v4l2_device_register_subdev_nodes(&vimc->v4l2_dev);
-	if (ret) {
-		dev_err(vimc->mdev.dev,
-			"vimc subdev nodes registration failed (err=%d)\n",
-			ret);
-		goto err_mdev_unregister;
-	}
-
-	return 0;
-
-err_mdev_unregister:
-	media_device_unregister(&vimc->mdev);
-err_rm_subdevs:
-	vimc_unregister_subdevs(vimc);
-	vimc_release_subdevs(vimc);
-	kfree(vimc->ent_devs);
-err_v4l2_unregister:
-	v4l2_device_unregister(&vimc->v4l2_dev);
-
-	return ret;
-}
-
-static void vimc_unregister(struct vimc_device *vimc)
-{
-	vimc_unregister_subdevs(vimc);
-	media_device_unregister(&vimc->mdev);
-	v4l2_device_unregister(&vimc->v4l2_dev);
-}
-
-static int vimc_probe(struct platform_device *pdev)
-{
-	struct vimc_device *vimc;
-	int ret;
-
-	dev_dbg(&pdev->dev, "probe");
-
-	vimc = kzalloc(sizeof(*vimc), GFP_KERNEL);
-	if (!vimc)
-		return -ENOMEM;
-
-	vimc->pipe_cfg = &pipe_cfg;
-
-	/* Link the media device within the v4l2_device */
-	vimc->v4l2_dev.mdev = &vimc->mdev;
-
-	/* Initialize media device */
-	strscpy(vimc->mdev.model, VIMC_MDEV_MODEL_NAME,
-		sizeof(vimc->mdev.model));
-	snprintf(vimc->mdev.bus_info, sizeof(vimc->mdev.bus_info),
-		 "platform:%s", VIMC_PDEV_NAME);
-	vimc->mdev.dev = &pdev->dev;
-	media_device_init(&vimc->mdev);
-
-	ret = vimc_register_devices(vimc);
-	if (ret) {
-		media_device_cleanup(&vimc->mdev);
-		kfree(vimc);
-		return ret;
-	}
-	/*
-	 * the release cb is set only after successful registration.
-	 * if the registration fails, we release directly from probe
-	 */
-
-	vimc->v4l2_dev.release = vimc_v4l2_dev_release;
-	platform_set_drvdata(pdev, vimc);
-	return 0;
-}
-
-static int vimc_remove(struct platform_device *pdev)
-{
-	struct vimc_device *vimc = platform_get_drvdata(pdev);
-
-	dev_dbg(&pdev->dev, "remove");
-
-	vimc_unregister(vimc);
-	v4l2_device_put(&vimc->v4l2_dev);
-
-	return 0;
-}
-
-static void vimc_dev_release(struct device *dev)
-{
-}
-
-static struct platform_device vimc_pdev = {
-	.name = VIMC_PDEV_NAME,
-	.dev.release = vimc_dev_release,
-};
-
-static struct platform_driver vimc_pdrv = {
-	.probe		= vimc_probe,
-	.remove		= vimc_remove,
-	.driver		= {
-		.name	= VIMC_PDEV_NAME,
-	},
-};
-
-static int __init vimc_init(void)
-{
-	int ret;
-
-	ret = platform_device_register(&vimc_pdev);
-	if (ret) {
-		dev_err(&vimc_pdev.dev,
-			"platform device registration failed (err=%d)\n", ret);
-		return ret;
-	}
-
-	ret = platform_driver_register(&vimc_pdrv);
-	if (ret) {
-		dev_err(&vimc_pdev.dev,
-			"platform driver registration failed (err=%d)\n", ret);
-		platform_driver_unregister(&vimc_pdrv);
-		return ret;
-	}
-
-	return 0;
-}
-
-static void __exit vimc_exit(void)
-{
-	platform_driver_unregister(&vimc_pdrv);
-
-	platform_device_unregister(&vimc_pdev);
-}
-
-module_init(vimc_init);
-module_exit(vimc_exit);
-
-MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC)");
-MODULE_AUTHOR("Helen Fornazier <helen.fornazier@gmail.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c
deleted file mode 100644
index baf6bf9f65b5..000000000000
--- a/drivers/media/platform/vimc/vimc-debayer.c
+++ /dev/null
@@ -1,581 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * vimc-debayer.c Virtual Media Controller Driver
- *
- * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
- */
-
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/vmalloc.h>
-#include <linux/v4l2-mediabus.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-subdev.h>
-
-#include "vimc-common.h"
-
-enum vimc_deb_rgb_colors {
-	VIMC_DEB_RED = 0,
-	VIMC_DEB_GREEN = 1,
-	VIMC_DEB_BLUE = 2,
-};
-
-struct vimc_deb_pix_map {
-	u32 code;
-	enum vimc_deb_rgb_colors order[2][2];
-};
-
-struct vimc_deb_device {
-	struct vimc_ent_device ved;
-	struct v4l2_subdev sd;
-	/* The active format */
-	struct v4l2_mbus_framefmt sink_fmt;
-	u32 src_code;
-	void (*set_rgb_src)(struct vimc_deb_device *vdeb, unsigned int lin,
-			    unsigned int col, unsigned int rgb[3]);
-	/* Values calculated when the stream starts */
-	u8 *src_frame;
-	const struct vimc_deb_pix_map *sink_pix_map;
-	unsigned int sink_bpp;
-	unsigned int mean_win_size;
-	struct v4l2_ctrl_handler hdl;
-	struct media_pad pads[2];
-};
-
-static const struct v4l2_mbus_framefmt sink_fmt_default = {
-	.width = 640,
-	.height = 480,
-	.code = MEDIA_BUS_FMT_SRGGB8_1X8,
-	.field = V4L2_FIELD_NONE,
-	.colorspace = V4L2_COLORSPACE_DEFAULT,
-};
-
-static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = {
-	{
-		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
-		.order = { { VIMC_DEB_BLUE, VIMC_DEB_GREEN },
-			   { VIMC_DEB_GREEN, VIMC_DEB_RED } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
-		.order = { { VIMC_DEB_GREEN, VIMC_DEB_BLUE },
-			   { VIMC_DEB_RED, VIMC_DEB_GREEN } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
-		.order = { { VIMC_DEB_GREEN, VIMC_DEB_RED },
-			   { VIMC_DEB_BLUE, VIMC_DEB_GREEN } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
-		.order = { { VIMC_DEB_RED, VIMC_DEB_GREEN },
-			   { VIMC_DEB_GREEN, VIMC_DEB_BLUE } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
-		.order = { { VIMC_DEB_BLUE, VIMC_DEB_GREEN },
-			   { VIMC_DEB_GREEN, VIMC_DEB_RED } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
-		.order = { { VIMC_DEB_GREEN, VIMC_DEB_BLUE },
-			   { VIMC_DEB_RED, VIMC_DEB_GREEN } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
-		.order = { { VIMC_DEB_GREEN, VIMC_DEB_RED },
-			   { VIMC_DEB_BLUE, VIMC_DEB_GREEN } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
-		.order = { { VIMC_DEB_RED, VIMC_DEB_GREEN },
-			   { VIMC_DEB_GREEN, VIMC_DEB_BLUE } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
-		.order = { { VIMC_DEB_BLUE, VIMC_DEB_GREEN },
-			   { VIMC_DEB_GREEN, VIMC_DEB_RED } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
-		.order = { { VIMC_DEB_GREEN, VIMC_DEB_BLUE },
-			   { VIMC_DEB_RED, VIMC_DEB_GREEN } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
-		.order = { { VIMC_DEB_GREEN, VIMC_DEB_RED },
-			   { VIMC_DEB_BLUE, VIMC_DEB_GREEN } }
-	},
-	{
-		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
-		.order = { { VIMC_DEB_RED, VIMC_DEB_GREEN },
-			   { VIMC_DEB_GREEN, VIMC_DEB_BLUE } }
-	},
-};
-
-static const struct vimc_deb_pix_map *vimc_deb_pix_map_by_code(u32 code)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(vimc_deb_pix_map_list); i++)
-		if (vimc_deb_pix_map_list[i].code == code)
-			return &vimc_deb_pix_map_list[i];
-
-	return NULL;
-}
-
-static int vimc_deb_init_cfg(struct v4l2_subdev *sd,
-			     struct v4l2_subdev_pad_config *cfg)
-{
-	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
-	struct v4l2_mbus_framefmt *mf;
-	unsigned int i;
-
-	mf = v4l2_subdev_get_try_format(sd, cfg, 0);
-	*mf = sink_fmt_default;
-
-	for (i = 1; i < sd->entity.num_pads; i++) {
-		mf = v4l2_subdev_get_try_format(sd, cfg, i);
-		*mf = sink_fmt_default;
-		mf->code = vdeb->src_code;
-	}
-
-	return 0;
-}
-
-static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd,
-				   struct v4l2_subdev_pad_config *cfg,
-				   struct v4l2_subdev_mbus_code_enum *code)
-{
-	/* We only support one format for source pads */
-	if (VIMC_IS_SRC(code->pad)) {
-		struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
-
-		if (code->index)
-			return -EINVAL;
-
-		code->code = vdeb->src_code;
-	} else {
-		if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list))
-			return -EINVAL;
-
-		code->code = vimc_deb_pix_map_list[code->index].code;
-	}
-
-	return 0;
-}
-
-static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd,
-				    struct v4l2_subdev_pad_config *cfg,
-				    struct v4l2_subdev_frame_size_enum *fse)
-{
-	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
-
-	if (fse->index)
-		return -EINVAL;
-
-	if (VIMC_IS_SINK(fse->pad)) {
-		const struct vimc_deb_pix_map *vpix =
-			vimc_deb_pix_map_by_code(fse->code);
-
-		if (!vpix)
-			return -EINVAL;
-	} else if (fse->code != vdeb->src_code) {
-		return -EINVAL;
-	}
-
-	fse->min_width = VIMC_FRAME_MIN_WIDTH;
-	fse->max_width = VIMC_FRAME_MAX_WIDTH;
-	fse->min_height = VIMC_FRAME_MIN_HEIGHT;
-	fse->max_height = VIMC_FRAME_MAX_HEIGHT;
-
-	return 0;
-}
-
-static int vimc_deb_get_fmt(struct v4l2_subdev *sd,
-			    struct v4l2_subdev_pad_config *cfg,
-			    struct v4l2_subdev_format *fmt)
-{
-	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
-
-	/* Get the current sink format */
-	fmt->format = fmt->which == V4L2_SUBDEV_FORMAT_TRY ?
-		      *v4l2_subdev_get_try_format(sd, cfg, 0) :
-		      vdeb->sink_fmt;
-
-	/* Set the right code for the source pad */
-	if (VIMC_IS_SRC(fmt->pad))
-		fmt->format.code = vdeb->src_code;
-
-	return 0;
-}
-
-static void vimc_deb_adjust_sink_fmt(struct v4l2_mbus_framefmt *fmt)
-{
-	const struct vimc_deb_pix_map *vpix;
-
-	/* Don't accept a code that is not on the debayer table */
-	vpix = vimc_deb_pix_map_by_code(fmt->code);
-	if (!vpix)
-		fmt->code = sink_fmt_default.code;
-
-	fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH,
-			     VIMC_FRAME_MAX_WIDTH) & ~1;
-	fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT,
-			      VIMC_FRAME_MAX_HEIGHT) & ~1;
-
-	if (fmt->field == V4L2_FIELD_ANY)
-		fmt->field = sink_fmt_default.field;
-
-	vimc_colorimetry_clamp(fmt);
-}
-
-static int vimc_deb_set_fmt(struct v4l2_subdev *sd,
-			    struct v4l2_subdev_pad_config *cfg,
-			    struct v4l2_subdev_format *fmt)
-{
-	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
-	struct v4l2_mbus_framefmt *sink_fmt;
-
-	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		/* Do not change the format while stream is on */
-		if (vdeb->src_frame)
-			return -EBUSY;
-
-		sink_fmt = &vdeb->sink_fmt;
-	} else {
-		sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
-	}
-
-	/*
-	 * Do not change the format of the source pad,
-	 * it is propagated from the sink
-	 */
-	if (VIMC_IS_SRC(fmt->pad)) {
-		fmt->format = *sink_fmt;
-		/* TODO: Add support for other formats */
-		fmt->format.code = vdeb->src_code;
-	} else {
-		/* Set the new format in the sink pad */
-		vimc_deb_adjust_sink_fmt(&fmt->format);
-
-		dev_dbg(vdeb->ved.dev, "%s: sink format update: "
-			"old:%dx%d (0x%x, %d, %d, %d, %d) "
-			"new:%dx%d (0x%x, %d, %d, %d, %d)\n", vdeb->sd.name,
-			/* old */
-			sink_fmt->width, sink_fmt->height, sink_fmt->code,
-			sink_fmt->colorspace, sink_fmt->quantization,
-			sink_fmt->xfer_func, sink_fmt->ycbcr_enc,
-			/* new */
-			fmt->format.width, fmt->format.height, fmt->format.code,
-			fmt->format.colorspace,	fmt->format.quantization,
-			fmt->format.xfer_func, fmt->format.ycbcr_enc);
-
-		*sink_fmt = fmt->format;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_subdev_pad_ops vimc_deb_pad_ops = {
-	.init_cfg		= vimc_deb_init_cfg,
-	.enum_mbus_code		= vimc_deb_enum_mbus_code,
-	.enum_frame_size	= vimc_deb_enum_frame_size,
-	.get_fmt		= vimc_deb_get_fmt,
-	.set_fmt		= vimc_deb_set_fmt,
-};
-
-static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb,
-						  unsigned int lin,
-						  unsigned int col,
-						  unsigned int rgb[3])
-{
-	unsigned int i, index;
-
-	index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3);
-	for (i = 0; i < 3; i++)
-		vdeb->src_frame[index + i] = rgb[i];
-}
-
-static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
-
-	if (enable) {
-		const struct vimc_pix_map *vpix;
-		unsigned int frame_size;
-
-		if (vdeb->src_frame)
-			return 0;
-
-		/* Calculate the frame size of the source pad */
-		vpix = vimc_pix_map_by_code(vdeb->src_code);
-		frame_size = vdeb->sink_fmt.width * vdeb->sink_fmt.height *
-				vpix->bpp;
-
-		/* Save the bytes per pixel of the sink */
-		vpix = vimc_pix_map_by_code(vdeb->sink_fmt.code);
-		vdeb->sink_bpp = vpix->bpp;
-
-		/* Get the corresponding pixel map from the table */
-		vdeb->sink_pix_map =
-			vimc_deb_pix_map_by_code(vdeb->sink_fmt.code);
-
-		/*
-		 * Allocate the frame buffer. Use vmalloc to be able to
-		 * allocate a large amount of memory
-		 */
-		vdeb->src_frame = vmalloc(frame_size);
-		if (!vdeb->src_frame)
-			return -ENOMEM;
-
-	} else {
-		if (!vdeb->src_frame)
-			return 0;
-
-		vfree(vdeb->src_frame);
-		vdeb->src_frame = NULL;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_subdev_core_ops vimc_deb_core_ops = {
-	.log_status = v4l2_ctrl_subdev_log_status,
-	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
-	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
-};
-
-static const struct v4l2_subdev_video_ops vimc_deb_video_ops = {
-	.s_stream = vimc_deb_s_stream,
-};
-
-static const struct v4l2_subdev_ops vimc_deb_ops = {
-	.core = &vimc_deb_core_ops,
-	.pad = &vimc_deb_pad_ops,
-	.video = &vimc_deb_video_ops,
-};
-
-static unsigned int vimc_deb_get_val(const u8 *bytes,
-				     const unsigned int n_bytes)
-{
-	unsigned int i;
-	unsigned int acc = 0;
-
-	for (i = 0; i < n_bytes; i++)
-		acc = acc + (bytes[i] << (8 * i));
-
-	return acc;
-}
-
-static void vimc_deb_calc_rgb_sink(struct vimc_deb_device *vdeb,
-				   const u8 *frame,
-				   const unsigned int lin,
-				   const unsigned int col,
-				   unsigned int rgb[3])
-{
-	unsigned int i, seek, wlin, wcol;
-	unsigned int n_rgb[3] = {0, 0, 0};
-
-	for (i = 0; i < 3; i++)
-		rgb[i] = 0;
-
-	/*
-	 * Calculate how many we need to subtract to get to the pixel in
-	 * the top left corner of the mean window (considering the current
-	 * pixel as the center)
-	 */
-	seek = vdeb->mean_win_size / 2;
-
-	/* Sum the values of the colors in the mean window */
-
-	dev_dbg(vdeb->ved.dev,
-		"deb: %s: --- Calc pixel %dx%d, window mean %d, seek %d ---\n",
-		vdeb->sd.name, lin, col, vdeb->sink_fmt.height, seek);
-
-	/*
-	 * Iterate through all the lines in the mean window, start
-	 * with zero if the pixel is outside the frame and don't pass
-	 * the height when the pixel is in the bottom border of the
-	 * frame
-	 */
-	for (wlin = seek > lin ? 0 : lin - seek;
-	     wlin < lin + seek + 1 && wlin < vdeb->sink_fmt.height;
-	     wlin++) {
-
-		/*
-		 * Iterate through all the columns in the mean window, start
-		 * with zero if the pixel is outside the frame and don't pass
-		 * the width when the pixel is in the right border of the
-		 * frame
-		 */
-		for (wcol = seek > col ? 0 : col - seek;
-		     wcol < col + seek + 1 && wcol < vdeb->sink_fmt.width;
-		     wcol++) {
-			enum vimc_deb_rgb_colors color;
-			unsigned int index;
-
-			/* Check which color this pixel is */
-			color = vdeb->sink_pix_map->order[wlin % 2][wcol % 2];
-
-			index = VIMC_FRAME_INDEX(wlin, wcol,
-						 vdeb->sink_fmt.width,
-						 vdeb->sink_bpp);
-
-			dev_dbg(vdeb->ved.dev,
-				"deb: %s: RGB CALC: frame index %d, win pos %dx%d, color %d\n",
-				vdeb->sd.name, index, wlin, wcol, color);
-
-			/* Get its value */
-			rgb[color] = rgb[color] +
-				vimc_deb_get_val(&frame[index], vdeb->sink_bpp);
-
-			/* Save how many values we already added */
-			n_rgb[color]++;
-
-			dev_dbg(vdeb->ved.dev, "deb: %s: RGB CALC: val %d, n %d\n",
-				vdeb->sd.name, rgb[color], n_rgb[color]);
-		}
-	}
-
-	/* Calculate the mean */
-	for (i = 0; i < 3; i++) {
-		dev_dbg(vdeb->ved.dev,
-			"deb: %s: PRE CALC: %dx%d Color %d, val %d, n %d\n",
-			vdeb->sd.name, lin, col, i, rgb[i], n_rgb[i]);
-
-		if (n_rgb[i])
-			rgb[i] = rgb[i] / n_rgb[i];
-
-		dev_dbg(vdeb->ved.dev,
-			"deb: %s: FINAL CALC: %dx%d Color %d, val %d\n",
-			vdeb->sd.name, lin, col, i, rgb[i]);
-	}
-}
-
-static void *vimc_deb_process_frame(struct vimc_ent_device *ved,
-				    const void *sink_frame)
-{
-	struct vimc_deb_device *vdeb = container_of(ved, struct vimc_deb_device,
-						    ved);
-	unsigned int rgb[3];
-	unsigned int i, j;
-
-	/* If the stream in this node is not active, just return */
-	if (!vdeb->src_frame)
-		return ERR_PTR(-EINVAL);
-
-	for (i = 0; i < vdeb->sink_fmt.height; i++)
-		for (j = 0; j < vdeb->sink_fmt.width; j++) {
-			vimc_deb_calc_rgb_sink(vdeb, sink_frame, i, j, rgb);
-			vdeb->set_rgb_src(vdeb, i, j, rgb);
-		}
-
-	return vdeb->src_frame;
-}
-
-static int vimc_deb_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vimc_deb_device *vdeb =
-		container_of(ctrl->handler, struct vimc_deb_device, hdl);
-
-	switch (ctrl->id) {
-	case VIMC_CID_MEAN_WIN_SIZE:
-		vdeb->mean_win_size = ctrl->val;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vimc_deb_ctrl_ops = {
-	.s_ctrl = vimc_deb_s_ctrl,
-};
-
-void vimc_deb_release(struct vimc_ent_device *ved)
-{
-	struct vimc_deb_device *vdeb =
-		container_of(ved, struct vimc_deb_device, ved);
-
-	v4l2_ctrl_handler_free(&vdeb->hdl);
-	media_entity_cleanup(vdeb->ved.ent);
-	kfree(vdeb);
-}
-
-static const struct v4l2_ctrl_config vimc_deb_ctrl_class = {
-	.flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY,
-	.id = VIMC_CID_VIMC_CLASS,
-	.name = "VIMC Controls",
-	.type = V4L2_CTRL_TYPE_CTRL_CLASS,
-};
-
-static const struct v4l2_ctrl_config vimc_deb_ctrl_mean_win_size = {
-	.ops = &vimc_deb_ctrl_ops,
-	.id = VIMC_CID_MEAN_WIN_SIZE,
-	.name = "Debayer Mean Window Size",
-	.type = V4L2_CTRL_TYPE_INTEGER,
-	.min = 1,
-	.max = 25,
-	.step = 2,
-	.def = 3,
-};
-
-struct vimc_ent_device *vimc_deb_add(struct vimc_device *vimc,
-				     const char *vcfg_name)
-{
-	struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
-	struct vimc_deb_device *vdeb;
-	int ret;
-
-	/* Allocate the vdeb struct */
-	vdeb = kzalloc(sizeof(*vdeb), GFP_KERNEL);
-	if (!vdeb)
-		return NULL;
-
-	/* Create controls: */
-	v4l2_ctrl_handler_init(&vdeb->hdl, 2);
-	v4l2_ctrl_new_custom(&vdeb->hdl, &vimc_deb_ctrl_class, NULL);
-	v4l2_ctrl_new_custom(&vdeb->hdl, &vimc_deb_ctrl_mean_win_size, NULL);
-	vdeb->sd.ctrl_handler = &vdeb->hdl;
-	if (vdeb->hdl.error) {
-		ret = vdeb->hdl.error;
-		goto err_free_vdeb;
-	}
-
-	/* Initialize ved and sd */
-	vdeb->pads[0].flags = MEDIA_PAD_FL_SINK;
-	vdeb->pads[1].flags = MEDIA_PAD_FL_SOURCE;
-
-	ret = vimc_ent_sd_register(&vdeb->ved, &vdeb->sd, v4l2_dev,
-				   vcfg_name,
-				   MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV, 2,
-				   vdeb->pads, &vimc_deb_ops);
-	if (ret)
-		goto err_free_hdl;
-
-	vdeb->ved.process_frame = vimc_deb_process_frame;
-	vdeb->ved.dev = vimc->mdev.dev;
-	vdeb->mean_win_size = vimc_deb_ctrl_mean_win_size.def;
-
-	/* Initialize the frame format */
-	vdeb->sink_fmt = sink_fmt_default;
-	/*
-	 * TODO: Add support for more output formats, we only support
-	 * RGB888 for now
-	 * NOTE: the src format is always the same as the sink, except
-	 * for the code
-	 */
-	vdeb->src_code = MEDIA_BUS_FMT_RGB888_1X24;
-	vdeb->set_rgb_src = vimc_deb_set_rgb_mbus_fmt_rgb888_1x24;
-
-	return &vdeb->ved;
-
-err_free_hdl:
-	v4l2_ctrl_handler_free(&vdeb->hdl);
-err_free_vdeb:
-	kfree(vdeb);
-
-	return NULL;
-}
diff --git a/drivers/media/platform/vimc/vimc-scaler.c b/drivers/media/platform/vimc/vimc-scaler.c
deleted file mode 100644
index 7521439747c5..000000000000
--- a/drivers/media/platform/vimc/vimc-scaler.c
+++ /dev/null
@@ -1,511 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * vimc-scaler.c Virtual Media Controller Driver
- *
- * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
- */
-
-#include <linux/moduleparam.h>
-#include <linux/vmalloc.h>
-#include <linux/v4l2-mediabus.h>
-#include <media/v4l2-rect.h>
-#include <media/v4l2-subdev.h>
-
-#include "vimc-common.h"
-
-static unsigned int sca_mult = 3;
-module_param(sca_mult, uint, 0000);
-MODULE_PARM_DESC(sca_mult, " the image size multiplier");
-
-#define MAX_ZOOM	8
-
-#define VIMC_SCA_FMT_WIDTH_DEFAULT  640
-#define VIMC_SCA_FMT_HEIGHT_DEFAULT 480
-
-struct vimc_sca_device {
-	struct vimc_ent_device ved;
-	struct v4l2_subdev sd;
-	/* NOTE: the source fmt is the same as the sink
-	 * with the width and hight multiplied by mult
-	 */
-	struct v4l2_mbus_framefmt sink_fmt;
-	struct v4l2_rect crop_rect;
-	/* Values calculated when the stream starts */
-	u8 *src_frame;
-	unsigned int src_line_size;
-	unsigned int bpp;
-	struct media_pad pads[2];
-};
-
-static const struct v4l2_mbus_framefmt sink_fmt_default = {
-	.width = VIMC_SCA_FMT_WIDTH_DEFAULT,
-	.height = VIMC_SCA_FMT_HEIGHT_DEFAULT,
-	.code = MEDIA_BUS_FMT_RGB888_1X24,
-	.field = V4L2_FIELD_NONE,
-	.colorspace = V4L2_COLORSPACE_DEFAULT,
-};
-
-static const struct v4l2_rect crop_rect_default = {
-	.width = VIMC_SCA_FMT_WIDTH_DEFAULT,
-	.height = VIMC_SCA_FMT_HEIGHT_DEFAULT,
-	.top = 0,
-	.left = 0,
-};
-
-static const struct v4l2_rect crop_rect_min = {
-	.width = VIMC_FRAME_MIN_WIDTH,
-	.height = VIMC_FRAME_MIN_HEIGHT,
-	.top = 0,
-	.left = 0,
-};
-
-static struct v4l2_rect
-vimc_sca_get_crop_bound_sink(const struct v4l2_mbus_framefmt *sink_fmt)
-{
-	/* Get the crop bounds to clamp the crop rectangle correctly */
-	struct v4l2_rect r = {
-		.left = 0,
-		.top = 0,
-		.width = sink_fmt->width,
-		.height = sink_fmt->height,
-	};
-	return r;
-}
-
-static void vimc_sca_adjust_sink_crop(struct v4l2_rect *r,
-				      const struct v4l2_mbus_framefmt *sink_fmt)
-{
-	const struct v4l2_rect sink_rect =
-		vimc_sca_get_crop_bound_sink(sink_fmt);
-
-	/* Disallow rectangles smaller than the minimal one. */
-	v4l2_rect_set_min_size(r, &crop_rect_min);
-	v4l2_rect_map_inside(r, &sink_rect);
-}
-
-static int vimc_sca_init_cfg(struct v4l2_subdev *sd,
-			     struct v4l2_subdev_pad_config *cfg)
-{
-	struct v4l2_mbus_framefmt *mf;
-	struct v4l2_rect *r;
-	unsigned int i;
-
-	mf = v4l2_subdev_get_try_format(sd, cfg, 0);
-	*mf = sink_fmt_default;
-
-	r = v4l2_subdev_get_try_crop(sd, cfg, 0);
-	*r = crop_rect_default;
-
-	for (i = 1; i < sd->entity.num_pads; i++) {
-		mf = v4l2_subdev_get_try_format(sd, cfg, i);
-		*mf = sink_fmt_default;
-		mf->width = mf->width * sca_mult;
-		mf->height = mf->height * sca_mult;
-	}
-
-	return 0;
-}
-
-static int vimc_sca_enum_mbus_code(struct v4l2_subdev *sd,
-				   struct v4l2_subdev_pad_config *cfg,
-				   struct v4l2_subdev_mbus_code_enum *code)
-{
-	const struct vimc_pix_map *vpix = vimc_pix_map_by_index(code->index);
-
-	/* We don't support bayer format */
-	if (!vpix || vpix->bayer)
-		return -EINVAL;
-
-	code->code = vpix->code;
-
-	return 0;
-}
-
-static int vimc_sca_enum_frame_size(struct v4l2_subdev *sd,
-				    struct v4l2_subdev_pad_config *cfg,
-				    struct v4l2_subdev_frame_size_enum *fse)
-{
-	const struct vimc_pix_map *vpix;
-
-	if (fse->index)
-		return -EINVAL;
-
-	/* Only accept code in the pix map table in non bayer format */
-	vpix = vimc_pix_map_by_code(fse->code);
-	if (!vpix || vpix->bayer)
-		return -EINVAL;
-
-	fse->min_width = VIMC_FRAME_MIN_WIDTH;
-	fse->min_height = VIMC_FRAME_MIN_HEIGHT;
-
-	if (VIMC_IS_SINK(fse->pad)) {
-		fse->max_width = VIMC_FRAME_MAX_WIDTH;
-		fse->max_height = VIMC_FRAME_MAX_HEIGHT;
-	} else {
-		fse->max_width = VIMC_FRAME_MAX_WIDTH * MAX_ZOOM;
-		fse->max_height = VIMC_FRAME_MAX_HEIGHT * MAX_ZOOM;
-	}
-
-	return 0;
-}
-
-static int vimc_sca_get_fmt(struct v4l2_subdev *sd,
-			    struct v4l2_subdev_pad_config *cfg,
-			    struct v4l2_subdev_format *format)
-{
-	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
-	struct v4l2_rect *crop_rect;
-
-	/* Get the current sink format */
-	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
-		format->format = *v4l2_subdev_get_try_format(sd, cfg, 0);
-		crop_rect = v4l2_subdev_get_try_crop(sd, cfg, 0);
-	} else {
-		format->format = vsca->sink_fmt;
-		crop_rect = &vsca->crop_rect;
-	}
-
-	/* Scale the frame size for the source pad */
-	if (VIMC_IS_SRC(format->pad)) {
-		format->format.width = crop_rect->width * sca_mult;
-		format->format.height = crop_rect->height * sca_mult;
-	}
-
-	return 0;
-}
-
-static void vimc_sca_adjust_sink_fmt(struct v4l2_mbus_framefmt *fmt)
-{
-	const struct vimc_pix_map *vpix;
-
-	/* Only accept code in the pix map table in non bayer format */
-	vpix = vimc_pix_map_by_code(fmt->code);
-	if (!vpix || vpix->bayer)
-		fmt->code = sink_fmt_default.code;
-
-	fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH,
-			     VIMC_FRAME_MAX_WIDTH) & ~1;
-	fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT,
-			      VIMC_FRAME_MAX_HEIGHT) & ~1;
-
-	if (fmt->field == V4L2_FIELD_ANY)
-		fmt->field = sink_fmt_default.field;
-
-	vimc_colorimetry_clamp(fmt);
-}
-
-static int vimc_sca_set_fmt(struct v4l2_subdev *sd,
-			    struct v4l2_subdev_pad_config *cfg,
-			    struct v4l2_subdev_format *fmt)
-{
-	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
-	struct v4l2_mbus_framefmt *sink_fmt;
-	struct v4l2_rect *crop_rect;
-
-	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		/* Do not change the format while stream is on */
-		if (vsca->src_frame)
-			return -EBUSY;
-
-		sink_fmt = &vsca->sink_fmt;
-		crop_rect = &vsca->crop_rect;
-	} else {
-		sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
-		crop_rect = v4l2_subdev_get_try_crop(sd, cfg, 0);
-	}
-
-	/*
-	 * Do not change the format of the source pad,
-	 * it is propagated from the sink
-	 */
-	if (VIMC_IS_SRC(fmt->pad)) {
-		fmt->format = *sink_fmt;
-		fmt->format.width = crop_rect->width * sca_mult;
-		fmt->format.height = crop_rect->height * sca_mult;
-	} else {
-		/* Set the new format in the sink pad */
-		vimc_sca_adjust_sink_fmt(&fmt->format);
-
-		dev_dbg(vsca->ved.dev, "%s: sink format update: "
-			"old:%dx%d (0x%x, %d, %d, %d, %d) "
-			"new:%dx%d (0x%x, %d, %d, %d, %d)\n", vsca->sd.name,
-			/* old */
-			sink_fmt->width, sink_fmt->height, sink_fmt->code,
-			sink_fmt->colorspace, sink_fmt->quantization,
-			sink_fmt->xfer_func, sink_fmt->ycbcr_enc,
-			/* new */
-			fmt->format.width, fmt->format.height, fmt->format.code,
-			fmt->format.colorspace,	fmt->format.quantization,
-			fmt->format.xfer_func, fmt->format.ycbcr_enc);
-
-		*sink_fmt = fmt->format;
-
-		/* Do the crop, but respect the current bounds */
-		vimc_sca_adjust_sink_crop(crop_rect, sink_fmt);
-	}
-
-	return 0;
-}
-
-static int vimc_sca_get_selection(struct v4l2_subdev *sd,
-				  struct v4l2_subdev_pad_config *cfg,
-				  struct v4l2_subdev_selection *sel)
-{
-	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
-	struct v4l2_mbus_framefmt *sink_fmt;
-	struct v4l2_rect *crop_rect;
-
-	if (VIMC_IS_SRC(sel->pad))
-		return -EINVAL;
-
-	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		sink_fmt = &vsca->sink_fmt;
-		crop_rect = &vsca->crop_rect;
-	} else {
-		sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
-		crop_rect = v4l2_subdev_get_try_crop(sd, cfg, 0);
-	}
-
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP:
-		sel->r = *crop_rect;
-		break;
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		sel->r = vimc_sca_get_crop_bound_sink(sink_fmt);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int vimc_sca_set_selection(struct v4l2_subdev *sd,
-				  struct v4l2_subdev_pad_config *cfg,
-				  struct v4l2_subdev_selection *sel)
-{
-	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
-	struct v4l2_mbus_framefmt *sink_fmt;
-	struct v4l2_rect *crop_rect;
-
-	if (VIMC_IS_SRC(sel->pad))
-		return -EINVAL;
-
-	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		/* Do not change the format while stream is on */
-		if (vsca->src_frame)
-			return -EBUSY;
-
-		crop_rect = &vsca->crop_rect;
-		sink_fmt = &vsca->sink_fmt;
-	} else {
-		crop_rect = v4l2_subdev_get_try_crop(sd, cfg, 0);
-		sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
-	}
-
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP:
-		/* Do the crop, but respect the current bounds */
-		vimc_sca_adjust_sink_crop(&sel->r, sink_fmt);
-		*crop_rect = sel->r;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_subdev_pad_ops vimc_sca_pad_ops = {
-	.init_cfg		= vimc_sca_init_cfg,
-	.enum_mbus_code		= vimc_sca_enum_mbus_code,
-	.enum_frame_size	= vimc_sca_enum_frame_size,
-	.get_fmt		= vimc_sca_get_fmt,
-	.set_fmt		= vimc_sca_set_fmt,
-	.get_selection		= vimc_sca_get_selection,
-	.set_selection		= vimc_sca_set_selection,
-};
-
-static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
-
-	if (enable) {
-		const struct vimc_pix_map *vpix;
-		unsigned int frame_size;
-
-		if (vsca->src_frame)
-			return 0;
-
-		/* Save the bytes per pixel of the sink */
-		vpix = vimc_pix_map_by_code(vsca->sink_fmt.code);
-		vsca->bpp = vpix->bpp;
-
-		/* Calculate the width in bytes of the src frame */
-		vsca->src_line_size = vsca->crop_rect.width *
-				      sca_mult * vsca->bpp;
-
-		/* Calculate the frame size of the source pad */
-		frame_size = vsca->src_line_size * vsca->crop_rect.height *
-			     sca_mult;
-
-		/* Allocate the frame buffer. Use vmalloc to be able to
-		 * allocate a large amount of memory
-		 */
-		vsca->src_frame = vmalloc(frame_size);
-		if (!vsca->src_frame)
-			return -ENOMEM;
-
-	} else {
-		if (!vsca->src_frame)
-			return 0;
-
-		vfree(vsca->src_frame);
-		vsca->src_frame = NULL;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_subdev_video_ops vimc_sca_video_ops = {
-	.s_stream = vimc_sca_s_stream,
-};
-
-static const struct v4l2_subdev_ops vimc_sca_ops = {
-	.pad = &vimc_sca_pad_ops,
-	.video = &vimc_sca_video_ops,
-};
-
-static void vimc_sca_fill_pix(u8 *const ptr,
-			      const u8 *const pixel,
-			      const unsigned int bpp)
-{
-	unsigned int i;
-
-	/* copy the pixel to the pointer */
-	for (i = 0; i < bpp; i++)
-		ptr[i] = pixel[i];
-}
-
-static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca,
-			       unsigned int lin, unsigned int col,
-			       const u8 *const sink_frame)
-{
-	const struct v4l2_rect crop_rect = vsca->crop_rect;
-	unsigned int i, j, index;
-	const u8 *pixel;
-
-	/* Point to the pixel value in position (lin, col) in the sink frame */
-	index = VIMC_FRAME_INDEX(lin, col,
-				 vsca->sink_fmt.width,
-				 vsca->bpp);
-	pixel = &sink_frame[index];
-
-	dev_dbg(vsca->ved.dev,
-		"sca: %s: --- scale_pix sink pos %dx%d, index %d ---\n",
-		vsca->sd.name, lin, col, index);
-
-	/* point to the place we are going to put the first pixel
-	 * in the scaled src frame
-	 */
-	lin -= crop_rect.top;
-	col -= crop_rect.left;
-	index = VIMC_FRAME_INDEX(lin * sca_mult, col * sca_mult,
-				 crop_rect.width * sca_mult, vsca->bpp);
-
-	dev_dbg(vsca->ved.dev, "sca: %s: scale_pix src pos %dx%d, index %d\n",
-		vsca->sd.name, lin * sca_mult, col * sca_mult, index);
-
-	/* Repeat this pixel mult times */
-	for (i = 0; i < sca_mult; i++) {
-		/* Iterate through each beginning of a
-		 * pixel repetition in a line
-		 */
-		for (j = 0; j < sca_mult * vsca->bpp; j += vsca->bpp) {
-			dev_dbg(vsca->ved.dev,
-				"sca: %s: sca: scale_pix src pos %d\n",
-				vsca->sd.name, index + j);
-
-			/* copy the pixel to the position index + j */
-			vimc_sca_fill_pix(&vsca->src_frame[index + j],
-					  pixel, vsca->bpp);
-		}
-
-		/* move the index to the next line */
-		index += vsca->src_line_size;
-	}
-}
-
-static void vimc_sca_fill_src_frame(const struct vimc_sca_device *const vsca,
-				    const u8 *const sink_frame)
-{
-	const struct v4l2_rect r = vsca->crop_rect;
-	unsigned int i, j;
-
-	/* Scale each pixel from the original sink frame */
-	/* TODO: implement scale down, only scale up is supported for now */
-	for (i = r.top; i < r.top + r.height; i++)
-		for (j = r.left; j < r.left + r.width; j++)
-			vimc_sca_scale_pix(vsca, i, j, sink_frame);
-}
-
-static void *vimc_sca_process_frame(struct vimc_ent_device *ved,
-				    const void *sink_frame)
-{
-	struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device,
-						    ved);
-
-	/* If the stream in this node is not active, just return */
-	if (!vsca->src_frame)
-		return ERR_PTR(-EINVAL);
-
-	vimc_sca_fill_src_frame(vsca, sink_frame);
-
-	return vsca->src_frame;
-};
-
-void vimc_sca_release(struct vimc_ent_device *ved)
-{
-	struct vimc_sca_device *vsca =
-		container_of(ved, struct vimc_sca_device, ved);
-
-	media_entity_cleanup(vsca->ved.ent);
-	kfree(vsca);
-}
-
-struct vimc_ent_device *vimc_sca_add(struct vimc_device *vimc,
-				     const char *vcfg_name)
-{
-	struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
-	struct vimc_sca_device *vsca;
-	int ret;
-
-	/* Allocate the vsca struct */
-	vsca = kzalloc(sizeof(*vsca), GFP_KERNEL);
-	if (!vsca)
-		return NULL;
-
-	/* Initialize ved and sd */
-	vsca->pads[0].flags = MEDIA_PAD_FL_SINK;
-	vsca->pads[1].flags = MEDIA_PAD_FL_SOURCE;
-
-	ret = vimc_ent_sd_register(&vsca->ved, &vsca->sd, v4l2_dev,
-				   vcfg_name,
-				   MEDIA_ENT_F_PROC_VIDEO_SCALER, 2,
-				   vsca->pads, &vimc_sca_ops);
-	if (ret) {
-		kfree(vsca);
-		return NULL;
-	}
-
-	vsca->ved.process_frame = vimc_sca_process_frame;
-	vsca->ved.dev = vimc->mdev.dev;
-
-	/* Initialize the frame format */
-	vsca->sink_fmt = sink_fmt_default;
-
-	/* Initialize the crop selection */
-	vsca->crop_rect = crop_rect_default;
-
-	return &vsca->ved;
-}
diff --git a/drivers/media/platform/vimc/vimc-sensor.c b/drivers/media/platform/vimc/vimc-sensor.c
deleted file mode 100644
index 92daee58209e..000000000000
--- a/drivers/media/platform/vimc/vimc-sensor.c
+++ /dev/null
@@ -1,376 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * vimc-sensor.c Virtual Media Controller Driver
- *
- * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
- */
-
-#include <linux/v4l2-mediabus.h>
-#include <linux/vmalloc.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-subdev.h>
-#include <media/tpg/v4l2-tpg.h>
-
-#include "vimc-common.h"
-
-struct vimc_sen_device {
-	struct vimc_ent_device ved;
-	struct v4l2_subdev sd;
-	struct tpg_data tpg;
-	u8 *frame;
-	/* The active format */
-	struct v4l2_mbus_framefmt mbus_format;
-	struct v4l2_ctrl_handler hdl;
-	struct media_pad pad;
-};
-
-static const struct v4l2_mbus_framefmt fmt_default = {
-	.width = 640,
-	.height = 480,
-	.code = MEDIA_BUS_FMT_RGB888_1X24,
-	.field = V4L2_FIELD_NONE,
-	.colorspace = V4L2_COLORSPACE_DEFAULT,
-};
-
-static int vimc_sen_init_cfg(struct v4l2_subdev *sd,
-			     struct v4l2_subdev_pad_config *cfg)
-{
-	unsigned int i;
-
-	for (i = 0; i < sd->entity.num_pads; i++) {
-		struct v4l2_mbus_framefmt *mf;
-
-		mf = v4l2_subdev_get_try_format(sd, cfg, i);
-		*mf = fmt_default;
-	}
-
-	return 0;
-}
-
-static int vimc_sen_enum_mbus_code(struct v4l2_subdev *sd,
-				   struct v4l2_subdev_pad_config *cfg,
-				   struct v4l2_subdev_mbus_code_enum *code)
-{
-	const struct vimc_pix_map *vpix = vimc_pix_map_by_index(code->index);
-
-	if (!vpix)
-		return -EINVAL;
-
-	code->code = vpix->code;
-
-	return 0;
-}
-
-static int vimc_sen_enum_frame_size(struct v4l2_subdev *sd,
-				    struct v4l2_subdev_pad_config *cfg,
-				    struct v4l2_subdev_frame_size_enum *fse)
-{
-	const struct vimc_pix_map *vpix;
-
-	if (fse->index)
-		return -EINVAL;
-
-	/* Only accept code in the pix map table */
-	vpix = vimc_pix_map_by_code(fse->code);
-	if (!vpix)
-		return -EINVAL;
-
-	fse->min_width = VIMC_FRAME_MIN_WIDTH;
-	fse->max_width = VIMC_FRAME_MAX_WIDTH;
-	fse->min_height = VIMC_FRAME_MIN_HEIGHT;
-	fse->max_height = VIMC_FRAME_MAX_HEIGHT;
-
-	return 0;
-}
-
-static int vimc_sen_get_fmt(struct v4l2_subdev *sd,
-			    struct v4l2_subdev_pad_config *cfg,
-			    struct v4l2_subdev_format *fmt)
-{
-	struct vimc_sen_device *vsen =
-				container_of(sd, struct vimc_sen_device, sd);
-
-	fmt->format = fmt->which == V4L2_SUBDEV_FORMAT_TRY ?
-		      *v4l2_subdev_get_try_format(sd, cfg, fmt->pad) :
-		      vsen->mbus_format;
-
-	return 0;
-}
-
-static void vimc_sen_tpg_s_format(struct vimc_sen_device *vsen)
-{
-	const struct vimc_pix_map *vpix =
-				vimc_pix_map_by_code(vsen->mbus_format.code);
-
-	tpg_reset_source(&vsen->tpg, vsen->mbus_format.width,
-			 vsen->mbus_format.height, vsen->mbus_format.field);
-	tpg_s_bytesperline(&vsen->tpg, 0, vsen->mbus_format.width * vpix->bpp);
-	tpg_s_buf_height(&vsen->tpg, vsen->mbus_format.height);
-	tpg_s_fourcc(&vsen->tpg, vpix->pixelformat);
-	/* TODO: add support for V4L2_FIELD_ALTERNATE */
-	tpg_s_field(&vsen->tpg, vsen->mbus_format.field, false);
-	tpg_s_colorspace(&vsen->tpg, vsen->mbus_format.colorspace);
-	tpg_s_ycbcr_enc(&vsen->tpg, vsen->mbus_format.ycbcr_enc);
-	tpg_s_quantization(&vsen->tpg, vsen->mbus_format.quantization);
-	tpg_s_xfer_func(&vsen->tpg, vsen->mbus_format.xfer_func);
-}
-
-static void vimc_sen_adjust_fmt(struct v4l2_mbus_framefmt *fmt)
-{
-	const struct vimc_pix_map *vpix;
-
-	/* Only accept code in the pix map table */
-	vpix = vimc_pix_map_by_code(fmt->code);
-	if (!vpix)
-		fmt->code = fmt_default.code;
-
-	fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH,
-			     VIMC_FRAME_MAX_WIDTH) & ~1;
-	fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT,
-			      VIMC_FRAME_MAX_HEIGHT) & ~1;
-
-	/* TODO: add support for V4L2_FIELD_ALTERNATE */
-	if (fmt->field == V4L2_FIELD_ANY || fmt->field == V4L2_FIELD_ALTERNATE)
-		fmt->field = fmt_default.field;
-
-	vimc_colorimetry_clamp(fmt);
-}
-
-static int vimc_sen_set_fmt(struct v4l2_subdev *sd,
-			    struct v4l2_subdev_pad_config *cfg,
-			    struct v4l2_subdev_format *fmt)
-{
-	struct vimc_sen_device *vsen = v4l2_get_subdevdata(sd);
-	struct v4l2_mbus_framefmt *mf;
-
-	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		/* Do not change the format while stream is on */
-		if (vsen->frame)
-			return -EBUSY;
-
-		mf = &vsen->mbus_format;
-	} else {
-		mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
-	}
-
-	/* Set the new format */
-	vimc_sen_adjust_fmt(&fmt->format);
-
-	dev_dbg(vsen->ved.dev, "%s: format update: "
-		"old:%dx%d (0x%x, %d, %d, %d, %d) "
-		"new:%dx%d (0x%x, %d, %d, %d, %d)\n", vsen->sd.name,
-		/* old */
-		mf->width, mf->height, mf->code,
-		mf->colorspace,	mf->quantization,
-		mf->xfer_func, mf->ycbcr_enc,
-		/* new */
-		fmt->format.width, fmt->format.height, fmt->format.code,
-		fmt->format.colorspace, fmt->format.quantization,
-		fmt->format.xfer_func, fmt->format.ycbcr_enc);
-
-	*mf = fmt->format;
-
-	return 0;
-}
-
-static const struct v4l2_subdev_pad_ops vimc_sen_pad_ops = {
-	.init_cfg		= vimc_sen_init_cfg,
-	.enum_mbus_code		= vimc_sen_enum_mbus_code,
-	.enum_frame_size	= vimc_sen_enum_frame_size,
-	.get_fmt		= vimc_sen_get_fmt,
-	.set_fmt		= vimc_sen_set_fmt,
-};
-
-static void *vimc_sen_process_frame(struct vimc_ent_device *ved,
-				    const void *sink_frame)
-{
-	struct vimc_sen_device *vsen = container_of(ved, struct vimc_sen_device,
-						    ved);
-
-	tpg_fill_plane_buffer(&vsen->tpg, 0, 0, vsen->frame);
-	return vsen->frame;
-}
-
-static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct vimc_sen_device *vsen =
-				container_of(sd, struct vimc_sen_device, sd);
-
-	if (enable) {
-		const struct vimc_pix_map *vpix;
-		unsigned int frame_size;
-
-		/* Calculate the frame size */
-		vpix = vimc_pix_map_by_code(vsen->mbus_format.code);
-		frame_size = vsen->mbus_format.width * vpix->bpp *
-			     vsen->mbus_format.height;
-
-		/*
-		 * Allocate the frame buffer. Use vmalloc to be able to
-		 * allocate a large amount of memory
-		 */
-		vsen->frame = vmalloc(frame_size);
-		if (!vsen->frame)
-			return -ENOMEM;
-
-		/* configure the test pattern generator */
-		vimc_sen_tpg_s_format(vsen);
-
-	} else {
-
-		vfree(vsen->frame);
-		vsen->frame = NULL;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_subdev_core_ops vimc_sen_core_ops = {
-	.log_status = v4l2_ctrl_subdev_log_status,
-	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
-	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
-};
-
-static const struct v4l2_subdev_video_ops vimc_sen_video_ops = {
-	.s_stream = vimc_sen_s_stream,
-};
-
-static const struct v4l2_subdev_ops vimc_sen_ops = {
-	.core = &vimc_sen_core_ops,
-	.pad = &vimc_sen_pad_ops,
-	.video = &vimc_sen_video_ops,
-};
-
-static int vimc_sen_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vimc_sen_device *vsen =
-		container_of(ctrl->handler, struct vimc_sen_device, hdl);
-
-	switch (ctrl->id) {
-	case VIMC_CID_TEST_PATTERN:
-		tpg_s_pattern(&vsen->tpg, ctrl->val);
-		break;
-	case V4L2_CID_HFLIP:
-		tpg_s_hflip(&vsen->tpg, ctrl->val);
-		break;
-	case V4L2_CID_VFLIP:
-		tpg_s_vflip(&vsen->tpg, ctrl->val);
-		break;
-	case V4L2_CID_BRIGHTNESS:
-		tpg_s_brightness(&vsen->tpg, ctrl->val);
-		break;
-	case V4L2_CID_CONTRAST:
-		tpg_s_contrast(&vsen->tpg, ctrl->val);
-		break;
-	case V4L2_CID_HUE:
-		tpg_s_hue(&vsen->tpg, ctrl->val);
-		break;
-	case V4L2_CID_SATURATION:
-		tpg_s_saturation(&vsen->tpg, ctrl->val);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vimc_sen_ctrl_ops = {
-	.s_ctrl = vimc_sen_s_ctrl,
-};
-
-void vimc_sen_release(struct vimc_ent_device *ved)
-{
-	struct vimc_sen_device *vsen =
-		container_of(ved, struct vimc_sen_device, ved);
-
-	v4l2_ctrl_handler_free(&vsen->hdl);
-	tpg_free(&vsen->tpg);
-	media_entity_cleanup(vsen->ved.ent);
-	kfree(vsen);
-}
-
-/* Image Processing Controls */
-static const struct v4l2_ctrl_config vimc_sen_ctrl_class = {
-	.flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY,
-	.id = VIMC_CID_VIMC_CLASS,
-	.name = "VIMC Controls",
-	.type = V4L2_CTRL_TYPE_CTRL_CLASS,
-};
-
-static const struct v4l2_ctrl_config vimc_sen_ctrl_test_pattern = {
-	.ops = &vimc_sen_ctrl_ops,
-	.id = VIMC_CID_TEST_PATTERN,
-	.name = "Test Pattern",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = TPG_PAT_NOISE,
-	.qmenu = tpg_pattern_strings,
-};
-
-struct vimc_ent_device *vimc_sen_add(struct vimc_device *vimc,
-				     const char *vcfg_name)
-{
-	struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
-	struct vimc_sen_device *vsen;
-	int ret;
-
-	/* Allocate the vsen struct */
-	vsen = kzalloc(sizeof(*vsen), GFP_KERNEL);
-	if (!vsen)
-		return NULL;
-
-	v4l2_ctrl_handler_init(&vsen->hdl, 4);
-
-	v4l2_ctrl_new_custom(&vsen->hdl, &vimc_sen_ctrl_class, NULL);
-	v4l2_ctrl_new_custom(&vsen->hdl, &vimc_sen_ctrl_test_pattern, NULL);
-	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
-			  V4L2_CID_VFLIP, 0, 1, 1, 0);
-	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
-			  V4L2_CID_HFLIP, 0, 1, 1, 0);
-	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
-			  V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
-			  V4L2_CID_CONTRAST, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
-			  V4L2_CID_HUE, -128, 127, 1, 0);
-	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
-			  V4L2_CID_SATURATION, 0, 255, 1, 128);
-	vsen->sd.ctrl_handler = &vsen->hdl;
-	if (vsen->hdl.error) {
-		ret = vsen->hdl.error;
-		goto err_free_vsen;
-	}
-
-	/* Initialize the test pattern generator */
-	tpg_init(&vsen->tpg, vsen->mbus_format.width,
-		 vsen->mbus_format.height);
-	ret = tpg_alloc(&vsen->tpg, VIMC_FRAME_MAX_WIDTH);
-	if (ret)
-		goto err_free_hdl;
-
-	/* Initialize ved and sd */
-	vsen->pad.flags = MEDIA_PAD_FL_SOURCE;
-	ret = vimc_ent_sd_register(&vsen->ved, &vsen->sd, v4l2_dev,
-				   vcfg_name,
-				   MEDIA_ENT_F_CAM_SENSOR, 1, &vsen->pad,
-				   &vimc_sen_ops);
-	if (ret)
-		goto err_free_tpg;
-
-	vsen->ved.process_frame = vimc_sen_process_frame;
-	vsen->ved.dev = vimc->mdev.dev;
-
-	/* Initialize the frame format */
-	vsen->mbus_format = fmt_default;
-
-	return &vsen->ved;
-
-err_free_tpg:
-	tpg_free(&vsen->tpg);
-err_free_hdl:
-	v4l2_ctrl_handler_free(&vsen->hdl);
-err_free_vsen:
-	kfree(vsen);
-
-	return NULL;
-}
diff --git a/drivers/media/platform/vimc/vimc-streamer.c b/drivers/media/platform/vimc/vimc-streamer.c
deleted file mode 100644
index 65feb3c596db..000000000000
--- a/drivers/media/platform/vimc/vimc-streamer.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * vimc-streamer.c Virtual Media Controller Driver
- *
- * Copyright (C) 2018 Lucas A. M. Magalhães <lucmaga@gmail.com>
- *
- */
-
-#include <linux/init.h>
-#include <linux/freezer.h>
-#include <linux/kthread.h>
-
-#include "vimc-streamer.h"
-
-/**
- * vimc_get_source_entity - get the entity connected with the first sink pad
- *
- * @ent:	reference media_entity
- *
- * Helper function that returns the media entity containing the source pad
- * linked with the first sink pad from the given media entity pad list.
- *
- * Return: The source pad or NULL, if it wasn't found.
- */
-static struct media_entity *vimc_get_source_entity(struct media_entity *ent)
-{
-	struct media_pad *pad;
-	int i;
-
-	for (i = 0; i < ent->num_pads; i++) {
-		if (ent->pads[i].flags & MEDIA_PAD_FL_SOURCE)
-			continue;
-		pad = media_entity_remote_pad(&ent->pads[i]);
-		return pad ? pad->entity : NULL;
-	}
-	return NULL;
-}
-
-/**
- * vimc_streamer_pipeline_terminate - Disable stream in all ved in stream
- *
- * @stream: the pointer to the stream structure with the pipeline to be
- *	    disabled.
- *
- * Calls s_stream to disable the stream in each entity of the pipeline
- *
- */
-static void vimc_streamer_pipeline_terminate(struct vimc_stream *stream)
-{
-	struct vimc_ent_device *ved;
-	struct v4l2_subdev *sd;
-
-	while (stream->pipe_size) {
-		stream->pipe_size--;
-		ved = stream->ved_pipeline[stream->pipe_size];
-		stream->ved_pipeline[stream->pipe_size] = NULL;
-
-		if (!is_media_entity_v4l2_subdev(ved->ent))
-			continue;
-
-		sd = media_entity_to_v4l2_subdev(ved->ent);
-		v4l2_subdev_call(sd, video, s_stream, 0);
-	}
-}
-
-/**
- * vimc_streamer_pipeline_init - Initializes the stream structure
- *
- * @stream: the pointer to the stream structure to be initialized
- * @ved:    the pointer to the vimc entity initializing the stream
- *
- * Initializes the stream structure. Walks through the entity graph to
- * construct the pipeline used later on the streamer thread.
- * Calls vimc_streamer_s_stream() to enable stream in all entities of
- * the pipeline.
- *
- * Return: 0 if success, error code otherwise.
- */
-static int vimc_streamer_pipeline_init(struct vimc_stream *stream,
-				       struct vimc_ent_device *ved)
-{
-	struct media_entity *entity;
-	struct video_device *vdev;
-	struct v4l2_subdev *sd;
-	int ret = 0;
-
-	stream->pipe_size = 0;
-	while (stream->pipe_size < VIMC_STREAMER_PIPELINE_MAX_SIZE) {
-		if (!ved) {
-			vimc_streamer_pipeline_terminate(stream);
-			return -EINVAL;
-		}
-		stream->ved_pipeline[stream->pipe_size++] = ved;
-
-		if (is_media_entity_v4l2_subdev(ved->ent)) {
-			sd = media_entity_to_v4l2_subdev(ved->ent);
-			ret = v4l2_subdev_call(sd, video, s_stream, 1);
-			if (ret && ret != -ENOIOCTLCMD) {
-				dev_err(ved->dev, "subdev_call error %s\n",
-					ved->ent->name);
-				vimc_streamer_pipeline_terminate(stream);
-				return ret;
-			}
-		}
-
-		entity = vimc_get_source_entity(ved->ent);
-		/* Check if the end of the pipeline was reached */
-		if (!entity) {
-			/* the first entity of the pipe should be source only */
-			if (!vimc_is_source(ved->ent)) {
-				dev_err(ved->dev,
-					"first entity in the pipe '%s' is not a source\n",
-					ved->ent->name);
-				vimc_streamer_pipeline_terminate(stream);
-				return -EPIPE;
-			}
-			return 0;
-		}
-
-		/* Get the next device in the pipeline */
-		if (is_media_entity_v4l2_subdev(entity)) {
-			sd = media_entity_to_v4l2_subdev(entity);
-			ved = v4l2_get_subdevdata(sd);
-		} else {
-			vdev = container_of(entity,
-					    struct video_device,
-					    entity);
-			ved = video_get_drvdata(vdev);
-		}
-	}
-
-	vimc_streamer_pipeline_terminate(stream);
-	return -EINVAL;
-}
-
-/**
- * vimc_streamer_thread - Process frames through the pipeline
- *
- * @data:	vimc_stream struct of the current stream
- *
- * From the source to the sink, gets a frame from each subdevice and send to
- * the next one of the pipeline at a fixed framerate.
- *
- * Return:
- * Always zero (created as ``int`` instead of ``void`` to comply with
- * kthread API).
- */
-static int vimc_streamer_thread(void *data)
-{
-	struct vimc_stream *stream = data;
-	u8 *frame = NULL;
-	int i;
-
-	set_freezable();
-
-	for (;;) {
-		try_to_freeze();
-		if (kthread_should_stop())
-			break;
-
-		for (i = stream->pipe_size - 1; i >= 0; i--) {
-			frame = stream->ved_pipeline[i]->process_frame(
-					stream->ved_pipeline[i], frame);
-			if (!frame || IS_ERR(frame))
-				break;
-		}
-		//wait for 60hz
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(HZ / 60);
-	}
-
-	return 0;
-}
-
-/**
- * vimc_streamer_s_stream - Start/stop the streaming on the media pipeline
- *
- * @stream:	the pointer to the stream structure of the current stream
- * @ved:	pointer to the vimc entity of the entity of the stream
- * @enable:	flag to determine if stream should start/stop
- *
- * When starting, check if there is no ``stream->kthread`` allocated. This
- * should indicate that a stream is already running. Then, it initializes the
- * pipeline, creates and runs a kthread to consume buffers through the pipeline.
- * When stopping, analogously check if there is a stream running, stop the
- * thread and terminates the pipeline.
- *
- * Return: 0 if success, error code otherwise.
- */
-int vimc_streamer_s_stream(struct vimc_stream *stream,
-			   struct vimc_ent_device *ved,
-			   int enable)
-{
-	int ret;
-
-	if (!stream || !ved)
-		return -EINVAL;
-
-	if (enable) {
-		if (stream->kthread)
-			return 0;
-
-		ret = vimc_streamer_pipeline_init(stream, ved);
-		if (ret)
-			return ret;
-
-		stream->kthread = kthread_run(vimc_streamer_thread, stream,
-					      "vimc-streamer thread");
-
-		if (IS_ERR(stream->kthread)) {
-			ret = PTR_ERR(stream->kthread);
-			dev_err(ved->dev, "kthread_run failed with %d\n", ret);
-			vimc_streamer_pipeline_terminate(stream);
-			stream->kthread = NULL;
-			return ret;
-		}
-
-	} else {
-		if (!stream->kthread)
-			return 0;
-
-		ret = kthread_stop(stream->kthread);
-		/*
-		 * kthread_stop returns -EINTR in cases when streamon was
-		 * immediately followed by streamoff, and the thread didn't had
-		 * a chance to run. Ignore errors to stop the stream in the
-		 * pipeline.
-		 */
-		if (ret)
-			dev_dbg(ved->dev, "kthread_stop returned '%d'\n", ret);
-
-		stream->kthread = NULL;
-
-		vimc_streamer_pipeline_terminate(stream);
-	}
-
-	return 0;
-}
diff --git a/drivers/media/platform/vimc/vimc-streamer.h b/drivers/media/platform/vimc/vimc-streamer.h
deleted file mode 100644
index fe3c51f15fad..000000000000
--- a/drivers/media/platform/vimc/vimc-streamer.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * vimc-streamer.h Virtual Media Controller Driver
- *
- * Copyright (C) 2018 Lucas A. M. Magalhães <lucmaga@gmail.com>
- *
- */
-
-#ifndef _VIMC_STREAMER_H_
-#define _VIMC_STREAMER_H_
-
-#include <media/media-device.h>
-
-#include "vimc-common.h"
-
-#define VIMC_STREAMER_PIPELINE_MAX_SIZE 16
-
-/**
- * struct vimc_stream - struct that represents a stream in the pipeline
- *
- * @pipe:		the media pipeline object associated with this stream
- * @ved_pipeline:	array containing all the entities participating in the
- * stream. The order is from a video device (usually a capture device) where
- * stream_on was called, to the entity generating the first base image to be
- * processed in the pipeline.
- * @pipe_size:		size of @ved_pipeline
- * @kthread:		thread that generates the frames of the stream.
- *
- * When the user call stream_on in a video device, struct vimc_stream is
- * used to keep track of all entities and subdevices that generates and
- * process frames for the stream.
- */
-struct vimc_stream {
-	struct media_pipeline pipe;
-	struct vimc_ent_device *ved_pipeline[VIMC_STREAMER_PIPELINE_MAX_SIZE];
-	unsigned int pipe_size;
-	struct task_struct *kthread;
-};
-
-int vimc_streamer_s_stream(struct vimc_stream *stream,
-			   struct vimc_ent_device *ved,
-			   int enable);
-
-#endif  //_VIMC_STREAMER_H_
diff --git a/drivers/media/platform/vivid/Kconfig b/drivers/media/platform/vivid/Kconfig
deleted file mode 100644
index e2ff06edfa93..000000000000
--- a/drivers/media/platform/vivid/Kconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config VIDEO_VIVID
-	tristate "Virtual Video Test Driver"
-	depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FB
-	depends on HAS_DMA
-	select FONT_SUPPORT
-	select FONT_8x16
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VIDEOBUF2_VMALLOC
-	select VIDEOBUF2_DMA_CONTIG
-	select VIDEO_V4L2_TPG
-	help
-	  Enables a virtual video driver. This driver emulates a webcam,
-	  TV, S-Video and HDMI capture hardware, including VBI support for
-	  the SDTV inputs. Also video output, VBI output, radio receivers,
-	  transmitters and software defined radio capture is emulated.
-
-	  It is highly configurable and is ideal for testing applications.
-	  Error injection is supported to test rare errors that are hard
-	  to reproduce in real hardware.
-
-	  Say Y here if you want to test video apps or debug V4L devices.
-	  When in doubt, say N.
-
-config VIDEO_VIVID_CEC
-	bool "Enable CEC emulation support"
-	depends on VIDEO_VIVID
-	select CEC_CORE
-	help
-	  When selected the vivid module will emulate the optional
-	  HDMI CEC feature.
-
-config VIDEO_VIVID_MAX_DEVS
-	int "Maximum number of devices"
-	depends on VIDEO_VIVID
-	default "64"
-	help
-	  This allows you to specify the maximum number of devices supported
-	  by the vivid driver.
diff --git a/drivers/media/platform/vivid/Makefile b/drivers/media/platform/vivid/Makefile
deleted file mode 100644
index b12ad0152a3e..000000000000
--- a/drivers/media/platform/vivid/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-vivid-objs := vivid-core.o vivid-ctrls.o vivid-vid-common.o vivid-vbi-gen.o \
-		vivid-vid-cap.o vivid-vid-out.o vivid-kthread-cap.o vivid-kthread-out.o \
-		vivid-radio-rx.o vivid-radio-tx.o vivid-radio-common.o \
-		vivid-rds-gen.o vivid-sdr-cap.o vivid-vbi-cap.o vivid-vbi-out.o \
-		vivid-osd.o vivid-meta-cap.o vivid-meta-out.o \
-		vivid-kthread-touch.o vivid-touch-cap.o
-ifeq ($(CONFIG_VIDEO_VIVID_CEC),y)
-  vivid-objs += vivid-cec.o
-endif
-
-obj-$(CONFIG_VIDEO_VIVID) += vivid.o
diff --git a/drivers/media/platform/vivid/vivid-cec.c b/drivers/media/platform/vivid/vivid-cec.c
deleted file mode 100644
index 4d2413e87730..000000000000
--- a/drivers/media/platform/vivid/vivid-cec.c
+++ /dev/null
@@ -1,286 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-cec.c - A Virtual Video Test Driver, cec emulation
- *
- * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <media/cec.h>
-
-#include "vivid-core.h"
-#include "vivid-cec.h"
-
-#define CEC_TIM_START_BIT_TOTAL		4500
-#define CEC_TIM_START_BIT_LOW		3700
-#define CEC_TIM_START_BIT_HIGH		800
-#define CEC_TIM_DATA_BIT_TOTAL		2400
-#define CEC_TIM_DATA_BIT_0_LOW		1500
-#define CEC_TIM_DATA_BIT_0_HIGH		900
-#define CEC_TIM_DATA_BIT_1_LOW		600
-#define CEC_TIM_DATA_BIT_1_HIGH		1800
-
-void vivid_cec_bus_free_work(struct vivid_dev *dev)
-{
-	spin_lock(&dev->cec_slock);
-	while (!list_empty(&dev->cec_work_list)) {
-		struct vivid_cec_work *cw =
-			list_first_entry(&dev->cec_work_list,
-					 struct vivid_cec_work, list);
-
-		spin_unlock(&dev->cec_slock);
-		cancel_delayed_work_sync(&cw->work);
-		spin_lock(&dev->cec_slock);
-		list_del(&cw->list);
-		cec_transmit_attempt_done(cw->adap, CEC_TX_STATUS_LOW_DRIVE);
-		kfree(cw);
-	}
-	spin_unlock(&dev->cec_slock);
-}
-
-static bool vivid_cec_find_dest_adap(struct vivid_dev *dev,
-				     struct cec_adapter *adap, u8 dest)
-{
-	unsigned int i;
-
-	if (dest >= 0xf)
-		return false;
-
-	if (adap != dev->cec_rx_adap && dev->cec_rx_adap &&
-	    dev->cec_rx_adap->is_configured &&
-	    cec_has_log_addr(dev->cec_rx_adap, dest))
-		return true;
-
-	for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++) {
-		if (adap == dev->cec_tx_adap[i])
-			continue;
-		if (!dev->cec_tx_adap[i]->is_configured)
-			continue;
-		if (cec_has_log_addr(dev->cec_tx_adap[i], dest))
-			return true;
-	}
-	return false;
-}
-
-static void vivid_cec_pin_adap_events(struct cec_adapter *adap, ktime_t ts,
-				      const struct cec_msg *msg, bool nacked)
-{
-	unsigned int len = nacked ? 1 : msg->len;
-	unsigned int i;
-	bool bit;
-
-	if (adap == NULL)
-		return;
-
-	/*
-	 * Suffix ULL on constant 10 makes the expression
-	 * CEC_TIM_START_BIT_TOTAL + 10ULL * len * CEC_TIM_DATA_BIT_TOTAL
-	 * to be evaluated using 64-bit unsigned arithmetic (u64), which
-	 * is what ktime_sub_us expects as second argument.
-	 */
-	ts = ktime_sub_us(ts, CEC_TIM_START_BIT_TOTAL +
-			       10ULL * len * CEC_TIM_DATA_BIT_TOTAL);
-	cec_queue_pin_cec_event(adap, false, false, ts);
-	ts = ktime_add_us(ts, CEC_TIM_START_BIT_LOW);
-	cec_queue_pin_cec_event(adap, true, false, ts);
-	ts = ktime_add_us(ts, CEC_TIM_START_BIT_HIGH);
-
-	for (i = 0; i < 10 * len; i++) {
-		switch (i % 10) {
-		case 0 ... 7:
-			bit = msg->msg[i / 10] & (0x80 >> (i % 10));
-			break;
-		case 8: /* EOM */
-			bit = i / 10 == msg->len - 1;
-			break;
-		case 9: /* ACK */
-			bit = cec_msg_is_broadcast(msg) ^ nacked;
-			break;
-		}
-		cec_queue_pin_cec_event(adap, false, false, ts);
-		if (bit)
-			ts = ktime_add_us(ts, CEC_TIM_DATA_BIT_1_LOW);
-		else
-			ts = ktime_add_us(ts, CEC_TIM_DATA_BIT_0_LOW);
-		cec_queue_pin_cec_event(adap, true, false, ts);
-		if (bit)
-			ts = ktime_add_us(ts, CEC_TIM_DATA_BIT_1_HIGH);
-		else
-			ts = ktime_add_us(ts, CEC_TIM_DATA_BIT_0_HIGH);
-	}
-}
-
-static void vivid_cec_pin_events(struct vivid_dev *dev,
-				 const struct cec_msg *msg, bool nacked)
-{
-	ktime_t ts = ktime_get();
-	unsigned int i;
-
-	vivid_cec_pin_adap_events(dev->cec_rx_adap, ts, msg, nacked);
-	for (i = 0; i < MAX_OUTPUTS; i++)
-		vivid_cec_pin_adap_events(dev->cec_tx_adap[i], ts, msg, nacked);
-}
-
-static void vivid_cec_xfer_done_worker(struct work_struct *work)
-{
-	struct vivid_cec_work *cw =
-		container_of(work, struct vivid_cec_work, work.work);
-	struct vivid_dev *dev = cw->dev;
-	struct cec_adapter *adap = cw->adap;
-	u8 dest = cec_msg_destination(&cw->msg);
-	bool valid_dest;
-	unsigned int i;
-
-	valid_dest = cec_msg_is_broadcast(&cw->msg);
-	if (!valid_dest)
-		valid_dest = vivid_cec_find_dest_adap(dev, adap, dest);
-
-	cw->tx_status = valid_dest ? CEC_TX_STATUS_OK : CEC_TX_STATUS_NACK;
-	spin_lock(&dev->cec_slock);
-	dev->cec_xfer_time_jiffies = 0;
-	dev->cec_xfer_start_jiffies = 0;
-	list_del(&cw->list);
-	spin_unlock(&dev->cec_slock);
-	vivid_cec_pin_events(dev, &cw->msg, !valid_dest);
-	cec_transmit_attempt_done(cw->adap, cw->tx_status);
-
-	/* Broadcast message */
-	if (adap != dev->cec_rx_adap)
-		cec_received_msg(dev->cec_rx_adap, &cw->msg);
-	for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++)
-		if (adap != dev->cec_tx_adap[i])
-			cec_received_msg(dev->cec_tx_adap[i], &cw->msg);
-	kfree(cw);
-}
-
-static void vivid_cec_xfer_try_worker(struct work_struct *work)
-{
-	struct vivid_cec_work *cw =
-		container_of(work, struct vivid_cec_work, work.work);
-	struct vivid_dev *dev = cw->dev;
-
-	spin_lock(&dev->cec_slock);
-	if (dev->cec_xfer_time_jiffies) {
-		list_del(&cw->list);
-		spin_unlock(&dev->cec_slock);
-		cec_transmit_attempt_done(cw->adap, CEC_TX_STATUS_ARB_LOST);
-		kfree(cw);
-	} else {
-		INIT_DELAYED_WORK(&cw->work, vivid_cec_xfer_done_worker);
-		dev->cec_xfer_start_jiffies = jiffies;
-		dev->cec_xfer_time_jiffies = usecs_to_jiffies(cw->usecs);
-		spin_unlock(&dev->cec_slock);
-		schedule_delayed_work(&cw->work, dev->cec_xfer_time_jiffies);
-	}
-}
-
-static int vivid_cec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	adap->cec_pin_is_high = true;
-	return 0;
-}
-
-static int vivid_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
-{
-	return 0;
-}
-
-/*
- * One data bit takes 2400 us, each byte needs 10 bits so that's 24000 us
- * per byte.
- */
-#define USECS_PER_BYTE 24000
-
-static int vivid_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
-				   u32 signal_free_time, struct cec_msg *msg)
-{
-	struct vivid_dev *dev = cec_get_drvdata(adap);
-	struct vivid_cec_work *cw = kzalloc(sizeof(*cw), GFP_KERNEL);
-	long delta_jiffies = 0;
-
-	if (cw == NULL)
-		return -ENOMEM;
-	cw->dev = dev;
-	cw->adap = adap;
-	cw->usecs = CEC_FREE_TIME_TO_USEC(signal_free_time) +
-		    msg->len * USECS_PER_BYTE;
-	cw->msg = *msg;
-
-	spin_lock(&dev->cec_slock);
-	list_add(&cw->list, &dev->cec_work_list);
-	if (dev->cec_xfer_time_jiffies == 0) {
-		INIT_DELAYED_WORK(&cw->work, vivid_cec_xfer_done_worker);
-		dev->cec_xfer_start_jiffies = jiffies;
-		dev->cec_xfer_time_jiffies = usecs_to_jiffies(cw->usecs);
-		delta_jiffies = dev->cec_xfer_time_jiffies;
-	} else {
-		INIT_DELAYED_WORK(&cw->work, vivid_cec_xfer_try_worker);
-		delta_jiffies = dev->cec_xfer_start_jiffies +
-			dev->cec_xfer_time_jiffies - jiffies;
-	}
-	spin_unlock(&dev->cec_slock);
-	schedule_delayed_work(&cw->work, delta_jiffies < 0 ? 0 : delta_jiffies);
-	return 0;
-}
-
-static int vivid_received(struct cec_adapter *adap, struct cec_msg *msg)
-{
-	struct vivid_dev *dev = cec_get_drvdata(adap);
-	struct cec_msg reply;
-	u8 dest = cec_msg_destination(msg);
-	u8 disp_ctl;
-	char osd[14];
-
-	if (cec_msg_is_broadcast(msg))
-		dest = adap->log_addrs.log_addr[0];
-	cec_msg_init(&reply, dest, cec_msg_initiator(msg));
-
-	switch (cec_msg_opcode(msg)) {
-	case CEC_MSG_SET_OSD_STRING:
-		if (!cec_is_sink(adap))
-			return -ENOMSG;
-		cec_ops_set_osd_string(msg, &disp_ctl, osd);
-		switch (disp_ctl) {
-		case CEC_OP_DISP_CTL_DEFAULT:
-			strscpy(dev->osd, osd, sizeof(dev->osd));
-			dev->osd_jiffies = jiffies;
-			break;
-		case CEC_OP_DISP_CTL_UNTIL_CLEARED:
-			strscpy(dev->osd, osd, sizeof(dev->osd));
-			dev->osd_jiffies = 0;
-			break;
-		case CEC_OP_DISP_CTL_CLEAR:
-			dev->osd[0] = 0;
-			dev->osd_jiffies = 0;
-			break;
-		default:
-			cec_msg_feature_abort(&reply, cec_msg_opcode(msg),
-					      CEC_OP_ABORT_INVALID_OP);
-			cec_transmit_msg(adap, &reply, false);
-			break;
-		}
-		break;
-	default:
-		return -ENOMSG;
-	}
-	return 0;
-}
-
-static const struct cec_adap_ops vivid_cec_adap_ops = {
-	.adap_enable = vivid_cec_adap_enable,
-	.adap_log_addr = vivid_cec_adap_log_addr,
-	.adap_transmit = vivid_cec_adap_transmit,
-	.received = vivid_received,
-};
-
-struct cec_adapter *vivid_cec_alloc_adap(struct vivid_dev *dev,
-					 unsigned int idx,
-					 bool is_source)
-{
-	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_MONITOR_ALL | CEC_CAP_MONITOR_PIN;
-	char name[32];
-
-	snprintf(name, sizeof(name), "vivid-%03d-vid-%s%d",
-		 dev->inst, is_source ? "out" : "cap", idx);
-	return cec_allocate_adapter(&vivid_cec_adap_ops, dev,
-		name, caps, 1);
-}
diff --git a/drivers/media/platform/vivid/vivid-cec.h b/drivers/media/platform/vivid/vivid-cec.h
deleted file mode 100644
index 7524ed48a914..000000000000
--- a/drivers/media/platform/vivid/vivid-cec.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-cec.h - A Virtual Video Test Driver, cec emulation
- *
- * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifdef CONFIG_VIDEO_VIVID_CEC
-struct cec_adapter *vivid_cec_alloc_adap(struct vivid_dev *dev,
-					 unsigned int idx,
-					 bool is_source);
-void vivid_cec_bus_free_work(struct vivid_dev *dev);
-
-#else
-
-static inline void vivid_cec_bus_free_work(struct vivid_dev *dev)
-{
-}
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-core.c b/drivers/media/platform/vivid/vivid-core.c
deleted file mode 100644
index 6c740e3e6999..000000000000
--- a/drivers/media/platform/vivid/vivid-core.c
+++ /dev/null
@@ -1,2006 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-core.c - A Virtual Video Test Driver, core initialization
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/font.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <media/videobuf2-vmalloc.h>
-#include <media/videobuf2-dma-contig.h>
-#include <media/v4l2-dv-timings.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-fh.h>
-#include <media/v4l2-event.h>
-
-#include "vivid-core.h"
-#include "vivid-vid-common.h"
-#include "vivid-vid-cap.h"
-#include "vivid-vid-out.h"
-#include "vivid-radio-common.h"
-#include "vivid-radio-rx.h"
-#include "vivid-radio-tx.h"
-#include "vivid-sdr-cap.h"
-#include "vivid-vbi-cap.h"
-#include "vivid-vbi-out.h"
-#include "vivid-osd.h"
-#include "vivid-cec.h"
-#include "vivid-ctrls.h"
-#include "vivid-meta-cap.h"
-#include "vivid-meta-out.h"
-#include "vivid-touch-cap.h"
-
-#define VIVID_MODULE_NAME "vivid"
-
-/* The maximum number of vivid devices */
-#define VIVID_MAX_DEVS CONFIG_VIDEO_VIVID_MAX_DEVS
-
-MODULE_DESCRIPTION("Virtual Video Test Driver");
-MODULE_AUTHOR("Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-static unsigned n_devs = 1;
-module_param(n_devs, uint, 0444);
-MODULE_PARM_DESC(n_devs, " number of driver instances to create");
-
-static int vid_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(vid_cap_nr, int, NULL, 0444);
-MODULE_PARM_DESC(vid_cap_nr, " videoX start number, -1 is autodetect");
-
-static int vid_out_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(vid_out_nr, int, NULL, 0444);
-MODULE_PARM_DESC(vid_out_nr, " videoX start number, -1 is autodetect");
-
-static int vbi_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(vbi_cap_nr, int, NULL, 0444);
-MODULE_PARM_DESC(vbi_cap_nr, " vbiX start number, -1 is autodetect");
-
-static int vbi_out_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(vbi_out_nr, int, NULL, 0444);
-MODULE_PARM_DESC(vbi_out_nr, " vbiX start number, -1 is autodetect");
-
-static int sdr_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(sdr_cap_nr, int, NULL, 0444);
-MODULE_PARM_DESC(sdr_cap_nr, " swradioX start number, -1 is autodetect");
-
-static int radio_rx_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(radio_rx_nr, int, NULL, 0444);
-MODULE_PARM_DESC(radio_rx_nr, " radioX start number, -1 is autodetect");
-
-static int radio_tx_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(radio_tx_nr, int, NULL, 0444);
-MODULE_PARM_DESC(radio_tx_nr, " radioX start number, -1 is autodetect");
-
-static int meta_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(meta_cap_nr, int, NULL, 0444);
-MODULE_PARM_DESC(meta_cap_nr, " videoX start number, -1 is autodetect");
-
-static int meta_out_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(meta_out_nr, int, NULL, 0444);
-MODULE_PARM_DESC(meta_out_nr, " videoX start number, -1 is autodetect");
-
-static int touch_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(touch_cap_nr, int, NULL, 0444);
-MODULE_PARM_DESC(touch_cap_nr, " v4l-touchX start number, -1 is autodetect");
-
-static int ccs_cap_mode[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(ccs_cap_mode, int, NULL, 0444);
-MODULE_PARM_DESC(ccs_cap_mode, " capture crop/compose/scale mode:\n"
-			   "\t\t    bit 0=crop, 1=compose, 2=scale,\n"
-			   "\t\t    -1=user-controlled (default)");
-
-static int ccs_out_mode[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
-module_param_array(ccs_out_mode, int, NULL, 0444);
-MODULE_PARM_DESC(ccs_out_mode, " output crop/compose/scale mode:\n"
-			   "\t\t    bit 0=crop, 1=compose, 2=scale,\n"
-			   "\t\t    -1=user-controlled (default)");
-
-static unsigned multiplanar[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 1 };
-module_param_array(multiplanar, uint, NULL, 0444);
-MODULE_PARM_DESC(multiplanar, " 1 (default) creates a single planar device, 2 creates a multiplanar device.");
-
-/*
- * Default: video + vbi-cap (raw and sliced) + radio rx + radio tx + sdr +
- * vbi-out + vid-out + meta-cap
- */
-static unsigned int node_types[VIVID_MAX_DEVS] = {
-	[0 ... (VIVID_MAX_DEVS - 1)] = 0xe1d3d
-};
-module_param_array(node_types, uint, NULL, 0444);
-MODULE_PARM_DESC(node_types, " node types, default is 0xe1d3d. Bitmask with the following meaning:\n"
-			     "\t\t    bit 0: Video Capture node\n"
-			     "\t\t    bit 2-3: VBI Capture node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both\n"
-			     "\t\t    bit 4: Radio Receiver node\n"
-			     "\t\t    bit 5: Software Defined Radio Receiver node\n"
-			     "\t\t    bit 8: Video Output node\n"
-			     "\t\t    bit 10-11: VBI Output node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both\n"
-			     "\t\t    bit 12: Radio Transmitter node\n"
-			     "\t\t    bit 16: Framebuffer for testing overlays\n"
-			     "\t\t    bit 17: Metadata Capture node\n"
-			     "\t\t    bit 18: Metadata Output node\n"
-			     "\t\t    bit 19: Touch Capture node\n");
-
-/* Default: 4 inputs */
-static unsigned num_inputs[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 4 };
-module_param_array(num_inputs, uint, NULL, 0444);
-MODULE_PARM_DESC(num_inputs, " number of inputs, default is 4");
-
-/* Default: input 0 = WEBCAM, 1 = TV, 2 = SVID, 3 = HDMI */
-static unsigned input_types[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0xe4 };
-module_param_array(input_types, uint, NULL, 0444);
-MODULE_PARM_DESC(input_types, " input types, default is 0xe4. Two bits per input,\n"
-			      "\t\t    bits 0-1 == input 0, bits 31-30 == input 15.\n"
-			      "\t\t    Type 0 == webcam, 1 == TV, 2 == S-Video, 3 == HDMI");
-
-/* Default: 2 outputs */
-static unsigned num_outputs[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 2 };
-module_param_array(num_outputs, uint, NULL, 0444);
-MODULE_PARM_DESC(num_outputs, " number of outputs, default is 2");
-
-/* Default: output 0 = SVID, 1 = HDMI */
-static unsigned output_types[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 2 };
-module_param_array(output_types, uint, NULL, 0444);
-MODULE_PARM_DESC(output_types, " output types, default is 0x02. One bit per output,\n"
-			      "\t\t    bit 0 == output 0, bit 15 == output 15.\n"
-			      "\t\t    Type 0 == S-Video, 1 == HDMI");
-
-unsigned vivid_debug;
-module_param(vivid_debug, uint, 0644);
-MODULE_PARM_DESC(vivid_debug, " activates debug info");
-
-static bool no_error_inj;
-module_param(no_error_inj, bool, 0444);
-MODULE_PARM_DESC(no_error_inj, " if set disable the error injecting controls");
-
-static unsigned int allocators[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0 };
-module_param_array(allocators, uint, NULL, 0444);
-MODULE_PARM_DESC(allocators, " memory allocator selection, default is 0.\n"
-			     "\t\t    0 == vmalloc\n"
-			     "\t\t    1 == dma-contig");
-
-static struct vivid_dev *vivid_devs[VIVID_MAX_DEVS];
-
-const struct v4l2_rect vivid_min_rect = {
-	0, 0, MIN_WIDTH, MIN_HEIGHT
-};
-
-const struct v4l2_rect vivid_max_rect = {
-	0, 0, MAX_WIDTH * MAX_ZOOM, MAX_HEIGHT * MAX_ZOOM
-};
-
-static const u8 vivid_hdmi_edid[256] = {
-	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-	0x31, 0xd8, 0x34, 0x12, 0x00, 0x00, 0x00, 0x00,
-	0x22, 0x1a, 0x01, 0x03, 0x80, 0x60, 0x36, 0x78,
-	0x0f, 0xee, 0x91, 0xa3, 0x54, 0x4c, 0x99, 0x26,
-	0x0f, 0x50, 0x54, 0x2f, 0xcf, 0x00, 0x31, 0x59,
-	0x45, 0x59, 0x81, 0x80, 0x81, 0x40, 0x90, 0x40,
-	0x95, 0x00, 0xa9, 0x40, 0xb3, 0x00, 0x08, 0xe8,
-	0x00, 0x30, 0xf2, 0x70, 0x5a, 0x80, 0xb0, 0x58,
-	0x8a, 0x00, 0xc0, 0x1c, 0x32, 0x00, 0x00, 0x1e,
-	0x00, 0x00, 0x00, 0xfd, 0x00, 0x18, 0x55, 0x18,
-	0x87, 0x3c, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20,
-	0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x76,
-	0x69, 0x76, 0x69, 0x64, 0x0a, 0x20, 0x20, 0x20,
-	0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0x10,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x7b,
-
-	0x02, 0x03, 0x3f, 0xf0, 0x51, 0x61, 0x60, 0x5f,
-	0x5e, 0x5d, 0x10, 0x1f, 0x04, 0x13, 0x22, 0x21,
-	0x20, 0x05, 0x14, 0x02, 0x11, 0x01, 0x23, 0x09,
-	0x07, 0x07, 0x83, 0x01, 0x00, 0x00, 0x6d, 0x03,
-	0x0c, 0x00, 0x10, 0x00, 0x00, 0x3c, 0x21, 0x00,
-	0x60, 0x01, 0x02, 0x03, 0x67, 0xd8, 0x5d, 0xc4,
-	0x01, 0x78, 0x00, 0x00, 0xe2, 0x00, 0xea, 0xe3,
-	0x05, 0x00, 0x00, 0xe3, 0x06, 0x01, 0x00, 0x4d,
-	0xd0, 0x00, 0xa0, 0xf0, 0x70, 0x3e, 0x80, 0x30,
-	0x20, 0x35, 0x00, 0xc0, 0x1c, 0x32, 0x00, 0x00,
-	0x1e, 0x1a, 0x36, 0x80, 0xa0, 0x70, 0x38, 0x1f,
-	0x40, 0x30, 0x20, 0x35, 0x00, 0xc0, 0x1c, 0x32,
-	0x00, 0x00, 0x1a, 0x1a, 0x1d, 0x00, 0x80, 0x51,
-	0xd0, 0x1c, 0x20, 0x40, 0x80, 0x35, 0x00, 0xc0,
-	0x1c, 0x32, 0x00, 0x00, 0x1c, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63,
-};
-
-static int vidioc_querycap(struct file *file, void  *priv,
-					struct v4l2_capability *cap)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	strscpy(cap->driver, "vivid", sizeof(cap->driver));
-	strscpy(cap->card, "vivid", sizeof(cap->card));
-	snprintf(cap->bus_info, sizeof(cap->bus_info),
-			"platform:%s", dev->v4l2_dev.name);
-
-	cap->capabilities = dev->vid_cap_caps | dev->vid_out_caps |
-		dev->vbi_cap_caps | dev->vbi_out_caps |
-		dev->radio_rx_caps | dev->radio_tx_caps |
-		dev->sdr_cap_caps | dev->meta_cap_caps |
-		dev->meta_out_caps | dev->touch_cap_caps |
-		V4L2_CAP_DEVICE_CAPS;
-	return 0;
-}
-
-static int vidioc_s_hw_freq_seek(struct file *file, void *fh, const struct v4l2_hw_freq_seek *a)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_RADIO)
-		return vivid_radio_rx_s_hw_freq_seek(file, fh, a);
-	return -ENOTTY;
-}
-
-static int vidioc_enum_freq_bands(struct file *file, void *fh, struct v4l2_frequency_band *band)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_RADIO)
-		return vivid_radio_rx_enum_freq_bands(file, fh, band);
-	if (vdev->vfl_type == VFL_TYPE_SDR)
-		return vivid_sdr_enum_freq_bands(file, fh, band);
-	return -ENOTTY;
-}
-
-static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_RADIO)
-		return vivid_radio_rx_g_tuner(file, fh, vt);
-	if (vdev->vfl_type == VFL_TYPE_SDR)
-		return vivid_sdr_g_tuner(file, fh, vt);
-	return vivid_video_g_tuner(file, fh, vt);
-}
-
-static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_RADIO)
-		return vivid_radio_rx_s_tuner(file, fh, vt);
-	if (vdev->vfl_type == VFL_TYPE_SDR)
-		return vivid_sdr_s_tuner(file, fh, vt);
-	return vivid_video_s_tuner(file, fh, vt);
-}
-
-static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_RADIO)
-		return vivid_radio_g_frequency(file,
-			vdev->vfl_dir == VFL_DIR_RX ?
-			&dev->radio_rx_freq : &dev->radio_tx_freq, vf);
-	if (vdev->vfl_type == VFL_TYPE_SDR)
-		return vivid_sdr_g_frequency(file, fh, vf);
-	return vivid_video_g_frequency(file, fh, vf);
-}
-
-static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_RADIO)
-		return vivid_radio_s_frequency(file,
-			vdev->vfl_dir == VFL_DIR_RX ?
-			&dev->radio_rx_freq : &dev->radio_tx_freq, vf);
-	if (vdev->vfl_type == VFL_TYPE_SDR)
-		return vivid_sdr_s_frequency(file, fh, vf);
-	return vivid_video_s_frequency(file, fh, vf);
-}
-
-static int vidioc_overlay(struct file *file, void *fh, unsigned i)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_overlay(file, fh, i);
-	return vivid_vid_out_overlay(file, fh, i);
-}
-
-static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *a)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_g_fbuf(file, fh, a);
-	return vivid_vid_out_g_fbuf(file, fh, a);
-}
-
-static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *a)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_s_fbuf(file, fh, a);
-	return vivid_vid_out_s_fbuf(file, fh, a);
-}
-
-static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id id)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_s_std(file, fh, id);
-	return vivid_vid_out_s_std(file, fh, id);
-}
-
-static int vidioc_s_dv_timings(struct file *file, void *fh, struct v4l2_dv_timings *timings)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_s_dv_timings(file, fh, timings);
-	return vivid_vid_out_s_dv_timings(file, fh, timings);
-}
-
-static int vidioc_g_pixelaspect(struct file *file, void *fh,
-				int type, struct v4l2_fract *f)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_g_pixelaspect(file, fh, type, f);
-	return vivid_vid_out_g_pixelaspect(file, fh, type, f);
-}
-
-static int vidioc_g_selection(struct file *file, void *fh,
-			      struct v4l2_selection *sel)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_g_selection(file, fh, sel);
-	return vivid_vid_out_g_selection(file, fh, sel);
-}
-
-static int vidioc_s_selection(struct file *file, void *fh,
-			      struct v4l2_selection *sel)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_s_selection(file, fh, sel);
-	return vivid_vid_out_s_selection(file, fh, sel);
-}
-
-static int vidioc_g_parm(struct file *file, void *fh,
-			  struct v4l2_streamparm *parm)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_g_parm_tch(file, fh, parm);
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_g_parm(file, fh, parm);
-	return vivid_vid_out_g_parm(file, fh, parm);
-}
-
-static int vidioc_s_parm(struct file *file, void *fh,
-			  struct v4l2_streamparm *parm)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_vid_cap_s_parm(file, fh, parm);
-	return -ENOTTY;
-}
-
-static int vidioc_log_status(struct file *file, void *fh)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-
-	v4l2_ctrl_log_status(file, fh);
-	if (vdev->vfl_dir == VFL_DIR_RX && vdev->vfl_type == VFL_TYPE_VIDEO)
-		tpg_log_status(&dev->tpg);
-	return 0;
-}
-
-static ssize_t vivid_radio_read(struct file *file, char __user *buf,
-			 size_t size, loff_t *offset)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_TX)
-		return -EINVAL;
-	return vivid_radio_rx_read(file, buf, size, offset);
-}
-
-static ssize_t vivid_radio_write(struct file *file, const char __user *buf,
-			  size_t size, loff_t *offset)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return -EINVAL;
-	return vivid_radio_tx_write(file, buf, size, offset);
-}
-
-static __poll_t vivid_radio_poll(struct file *file, struct poll_table_struct *wait)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX)
-		return vivid_radio_rx_poll(file, wait);
-	return vivid_radio_tx_poll(file, wait);
-}
-
-static int vivid_enum_input(struct file *file, void *priv,
-			    struct v4l2_input *inp)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_enum_input_tch(file, priv, inp);
-	return vidioc_enum_input(file, priv, inp);
-}
-
-static int vivid_g_input(struct file *file, void *priv, unsigned int *i)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_g_input_tch(file, priv, i);
-	return vidioc_g_input(file, priv, i);
-}
-
-static int vivid_s_input(struct file *file, void *priv, unsigned int i)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_s_input_tch(file, priv, i);
-	return vidioc_s_input(file, priv, i);
-}
-
-static int vivid_enum_fmt_cap(struct file *file, void  *priv,
-			      struct v4l2_fmtdesc *f)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_enum_fmt_tch(file, priv, f);
-	return vivid_enum_fmt_vid(file, priv, f);
-}
-
-static int vivid_g_fmt_cap(struct file *file, void *priv,
-			   struct v4l2_format *f)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_g_fmt_tch(file, priv, f);
-	return vidioc_g_fmt_vid_cap(file, priv, f);
-}
-
-static int vivid_try_fmt_cap(struct file *file, void *priv,
-			     struct v4l2_format *f)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_g_fmt_tch(file, priv, f);
-	return vidioc_try_fmt_vid_cap(file, priv, f);
-}
-
-static int vivid_s_fmt_cap(struct file *file, void *priv,
-			   struct v4l2_format *f)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_g_fmt_tch(file, priv, f);
-	return vidioc_s_fmt_vid_cap(file, priv, f);
-}
-
-static int vivid_g_fmt_cap_mplane(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_g_fmt_tch_mplane(file, priv, f);
-	return vidioc_g_fmt_vid_cap_mplane(file, priv, f);
-}
-
-static int vivid_try_fmt_cap_mplane(struct file *file, void *priv,
-				    struct v4l2_format *f)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_g_fmt_tch_mplane(file, priv, f);
-	return vidioc_try_fmt_vid_cap_mplane(file, priv, f);
-}
-
-static int vivid_s_fmt_cap_mplane(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_type == VFL_TYPE_TOUCH)
-		return vivid_g_fmt_tch_mplane(file, priv, f);
-	return vidioc_s_fmt_vid_cap_mplane(file, priv, f);
-}
-
-static bool vivid_is_in_use(struct video_device *vdev)
-{
-	unsigned long flags;
-	bool res;
-
-	spin_lock_irqsave(&vdev->fh_lock, flags);
-	res = !list_empty(&vdev->fh_list);
-	spin_unlock_irqrestore(&vdev->fh_lock, flags);
-	return res;
-}
-
-static bool vivid_is_last_user(struct vivid_dev *dev)
-{
-	unsigned uses = vivid_is_in_use(&dev->vid_cap_dev) +
-			vivid_is_in_use(&dev->vid_out_dev) +
-			vivid_is_in_use(&dev->vbi_cap_dev) +
-			vivid_is_in_use(&dev->vbi_out_dev) +
-			vivid_is_in_use(&dev->sdr_cap_dev) +
-			vivid_is_in_use(&dev->radio_rx_dev) +
-			vivid_is_in_use(&dev->radio_tx_dev) +
-			vivid_is_in_use(&dev->meta_cap_dev) +
-			vivid_is_in_use(&dev->meta_out_dev) +
-			vivid_is_in_use(&dev->touch_cap_dev);
-
-	return uses == 1;
-}
-
-static int vivid_fop_release(struct file *file)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-
-	mutex_lock(&dev->mutex);
-	if (!no_error_inj && v4l2_fh_is_singular_file(file) &&
-	    !video_is_registered(vdev) && vivid_is_last_user(dev)) {
-		/*
-		 * I am the last user of this driver, and a disconnect
-		 * was forced (since this video_device is unregistered),
-		 * so re-register all video_device's again.
-		 */
-		v4l2_info(&dev->v4l2_dev, "reconnect\n");
-		set_bit(V4L2_FL_REGISTERED, &dev->vid_cap_dev.flags);
-		set_bit(V4L2_FL_REGISTERED, &dev->vid_out_dev.flags);
-		set_bit(V4L2_FL_REGISTERED, &dev->vbi_cap_dev.flags);
-		set_bit(V4L2_FL_REGISTERED, &dev->vbi_out_dev.flags);
-		set_bit(V4L2_FL_REGISTERED, &dev->sdr_cap_dev.flags);
-		set_bit(V4L2_FL_REGISTERED, &dev->radio_rx_dev.flags);
-		set_bit(V4L2_FL_REGISTERED, &dev->radio_tx_dev.flags);
-		set_bit(V4L2_FL_REGISTERED, &dev->meta_cap_dev.flags);
-		set_bit(V4L2_FL_REGISTERED, &dev->meta_out_dev.flags);
-		set_bit(V4L2_FL_REGISTERED, &dev->touch_cap_dev.flags);
-	}
-	mutex_unlock(&dev->mutex);
-	if (file->private_data == dev->overlay_cap_owner)
-		dev->overlay_cap_owner = NULL;
-	if (file->private_data == dev->radio_rx_rds_owner) {
-		dev->radio_rx_rds_last_block = 0;
-		dev->radio_rx_rds_owner = NULL;
-	}
-	if (file->private_data == dev->radio_tx_rds_owner) {
-		dev->radio_tx_rds_last_block = 0;
-		dev->radio_tx_rds_owner = NULL;
-	}
-	if (vdev->queue)
-		return vb2_fop_release(file);
-	return v4l2_fh_release(file);
-}
-
-static const struct v4l2_file_operations vivid_fops = {
-	.owner		= THIS_MODULE,
-	.open           = v4l2_fh_open,
-	.release        = vivid_fop_release,
-	.read           = vb2_fop_read,
-	.write          = vb2_fop_write,
-	.poll		= vb2_fop_poll,
-	.unlocked_ioctl = video_ioctl2,
-	.mmap           = vb2_fop_mmap,
-};
-
-static const struct v4l2_file_operations vivid_radio_fops = {
-	.owner		= THIS_MODULE,
-	.open           = v4l2_fh_open,
-	.release        = vivid_fop_release,
-	.read           = vivid_radio_read,
-	.write          = vivid_radio_write,
-	.poll		= vivid_radio_poll,
-	.unlocked_ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops vivid_ioctl_ops = {
-	.vidioc_querycap		= vidioc_querycap,
-
-	.vidioc_enum_fmt_vid_cap	= vivid_enum_fmt_cap,
-	.vidioc_g_fmt_vid_cap		= vivid_g_fmt_cap,
-	.vidioc_try_fmt_vid_cap		= vivid_try_fmt_cap,
-	.vidioc_s_fmt_vid_cap		= vivid_s_fmt_cap,
-	.vidioc_g_fmt_vid_cap_mplane	= vivid_g_fmt_cap_mplane,
-	.vidioc_try_fmt_vid_cap_mplane	= vivid_try_fmt_cap_mplane,
-	.vidioc_s_fmt_vid_cap_mplane	= vivid_s_fmt_cap_mplane,
-
-	.vidioc_enum_fmt_vid_out	= vivid_enum_fmt_vid,
-	.vidioc_g_fmt_vid_out		= vidioc_g_fmt_vid_out,
-	.vidioc_try_fmt_vid_out		= vidioc_try_fmt_vid_out,
-	.vidioc_s_fmt_vid_out		= vidioc_s_fmt_vid_out,
-	.vidioc_g_fmt_vid_out_mplane	= vidioc_g_fmt_vid_out_mplane,
-	.vidioc_try_fmt_vid_out_mplane	= vidioc_try_fmt_vid_out_mplane,
-	.vidioc_s_fmt_vid_out_mplane	= vidioc_s_fmt_vid_out_mplane,
-
-	.vidioc_g_selection		= vidioc_g_selection,
-	.vidioc_s_selection		= vidioc_s_selection,
-	.vidioc_g_pixelaspect		= vidioc_g_pixelaspect,
-
-	.vidioc_g_fmt_vbi_cap		= vidioc_g_fmt_vbi_cap,
-	.vidioc_try_fmt_vbi_cap		= vidioc_g_fmt_vbi_cap,
-	.vidioc_s_fmt_vbi_cap		= vidioc_s_fmt_vbi_cap,
-
-	.vidioc_g_fmt_sliced_vbi_cap    = vidioc_g_fmt_sliced_vbi_cap,
-	.vidioc_try_fmt_sliced_vbi_cap  = vidioc_try_fmt_sliced_vbi_cap,
-	.vidioc_s_fmt_sliced_vbi_cap    = vidioc_s_fmt_sliced_vbi_cap,
-	.vidioc_g_sliced_vbi_cap	= vidioc_g_sliced_vbi_cap,
-
-	.vidioc_g_fmt_vbi_out		= vidioc_g_fmt_vbi_out,
-	.vidioc_try_fmt_vbi_out		= vidioc_g_fmt_vbi_out,
-	.vidioc_s_fmt_vbi_out		= vidioc_s_fmt_vbi_out,
-
-	.vidioc_g_fmt_sliced_vbi_out    = vidioc_g_fmt_sliced_vbi_out,
-	.vidioc_try_fmt_sliced_vbi_out  = vidioc_try_fmt_sliced_vbi_out,
-	.vidioc_s_fmt_sliced_vbi_out    = vidioc_s_fmt_sliced_vbi_out,
-
-	.vidioc_enum_fmt_sdr_cap	= vidioc_enum_fmt_sdr_cap,
-	.vidioc_g_fmt_sdr_cap		= vidioc_g_fmt_sdr_cap,
-	.vidioc_try_fmt_sdr_cap		= vidioc_try_fmt_sdr_cap,
-	.vidioc_s_fmt_sdr_cap		= vidioc_s_fmt_sdr_cap,
-
-	.vidioc_overlay			= vidioc_overlay,
-	.vidioc_enum_framesizes		= vidioc_enum_framesizes,
-	.vidioc_enum_frameintervals	= vidioc_enum_frameintervals,
-	.vidioc_g_parm			= vidioc_g_parm,
-	.vidioc_s_parm			= vidioc_s_parm,
-
-	.vidioc_enum_fmt_vid_overlay	= vidioc_enum_fmt_vid_overlay,
-	.vidioc_g_fmt_vid_overlay	= vidioc_g_fmt_vid_overlay,
-	.vidioc_try_fmt_vid_overlay	= vidioc_try_fmt_vid_overlay,
-	.vidioc_s_fmt_vid_overlay	= vidioc_s_fmt_vid_overlay,
-	.vidioc_g_fmt_vid_out_overlay	= vidioc_g_fmt_vid_out_overlay,
-	.vidioc_try_fmt_vid_out_overlay	= vidioc_try_fmt_vid_out_overlay,
-	.vidioc_s_fmt_vid_out_overlay	= vidioc_s_fmt_vid_out_overlay,
-	.vidioc_g_fbuf			= vidioc_g_fbuf,
-	.vidioc_s_fbuf			= vidioc_s_fbuf,
-
-	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
-	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
-	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
-	.vidioc_querybuf		= vb2_ioctl_querybuf,
-	.vidioc_qbuf			= vb2_ioctl_qbuf,
-	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
-	.vidioc_expbuf			= vb2_ioctl_expbuf,
-	.vidioc_streamon		= vb2_ioctl_streamon,
-	.vidioc_streamoff		= vb2_ioctl_streamoff,
-
-	.vidioc_enum_input		= vivid_enum_input,
-	.vidioc_g_input			= vivid_g_input,
-	.vidioc_s_input			= vivid_s_input,
-	.vidioc_s_audio			= vidioc_s_audio,
-	.vidioc_g_audio			= vidioc_g_audio,
-	.vidioc_enumaudio		= vidioc_enumaudio,
-	.vidioc_s_frequency		= vidioc_s_frequency,
-	.vidioc_g_frequency		= vidioc_g_frequency,
-	.vidioc_s_tuner			= vidioc_s_tuner,
-	.vidioc_g_tuner			= vidioc_g_tuner,
-	.vidioc_s_modulator		= vidioc_s_modulator,
-	.vidioc_g_modulator		= vidioc_g_modulator,
-	.vidioc_s_hw_freq_seek		= vidioc_s_hw_freq_seek,
-	.vidioc_enum_freq_bands		= vidioc_enum_freq_bands,
-
-	.vidioc_enum_output		= vidioc_enum_output,
-	.vidioc_g_output		= vidioc_g_output,
-	.vidioc_s_output		= vidioc_s_output,
-	.vidioc_s_audout		= vidioc_s_audout,
-	.vidioc_g_audout		= vidioc_g_audout,
-	.vidioc_enumaudout		= vidioc_enumaudout,
-
-	.vidioc_querystd		= vidioc_querystd,
-	.vidioc_g_std			= vidioc_g_std,
-	.vidioc_s_std			= vidioc_s_std,
-	.vidioc_s_dv_timings		= vidioc_s_dv_timings,
-	.vidioc_g_dv_timings		= vidioc_g_dv_timings,
-	.vidioc_query_dv_timings	= vidioc_query_dv_timings,
-	.vidioc_enum_dv_timings		= vidioc_enum_dv_timings,
-	.vidioc_dv_timings_cap		= vidioc_dv_timings_cap,
-	.vidioc_g_edid			= vidioc_g_edid,
-	.vidioc_s_edid			= vidioc_s_edid,
-
-	.vidioc_log_status		= vidioc_log_status,
-	.vidioc_subscribe_event		= vidioc_subscribe_event,
-	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
-
-	.vidioc_enum_fmt_meta_cap	= vidioc_enum_fmt_meta_cap,
-	.vidioc_g_fmt_meta_cap		= vidioc_g_fmt_meta_cap,
-	.vidioc_s_fmt_meta_cap		= vidioc_g_fmt_meta_cap,
-	.vidioc_try_fmt_meta_cap	= vidioc_g_fmt_meta_cap,
-
-	.vidioc_enum_fmt_meta_out       = vidioc_enum_fmt_meta_out,
-	.vidioc_g_fmt_meta_out          = vidioc_g_fmt_meta_out,
-	.vidioc_s_fmt_meta_out          = vidioc_g_fmt_meta_out,
-	.vidioc_try_fmt_meta_out        = vidioc_g_fmt_meta_out,
-};
-
-/* -----------------------------------------------------------------
-	Initialization and module stuff
-   ------------------------------------------------------------------*/
-
-static void vivid_dev_release(struct v4l2_device *v4l2_dev)
-{
-	struct vivid_dev *dev = container_of(v4l2_dev, struct vivid_dev, v4l2_dev);
-
-	vivid_free_controls(dev);
-	v4l2_device_unregister(&dev->v4l2_dev);
-#ifdef CONFIG_MEDIA_CONTROLLER
-	media_device_cleanup(&dev->mdev);
-#endif
-	vfree(dev->scaled_line);
-	vfree(dev->blended_line);
-	vfree(dev->edid);
-	vfree(dev->bitmap_cap);
-	vfree(dev->bitmap_out);
-	tpg_free(&dev->tpg);
-	kfree(dev->query_dv_timings_qmenu);
-	kfree(dev->query_dv_timings_qmenu_strings);
-	kfree(dev);
-}
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-static int vivid_req_validate(struct media_request *req)
-{
-	struct vivid_dev *dev = container_of(req->mdev, struct vivid_dev, mdev);
-
-	if (dev->req_validate_error) {
-		dev->req_validate_error = false;
-		return -EINVAL;
-	}
-	return vb2_request_validate(req);
-}
-
-static const struct media_device_ops vivid_media_ops = {
-	.req_validate = vivid_req_validate,
-	.req_queue = vb2_request_queue,
-};
-#endif
-
-static int vivid_create_queue(struct vivid_dev *dev,
-			      struct vb2_queue *q,
-			      u32 buf_type,
-			      unsigned int min_buffers_needed,
-			      const struct vb2_ops *ops)
-{
-	if (buf_type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->multiplanar)
-		buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
-	else if (buf_type == V4L2_BUF_TYPE_VIDEO_OUTPUT && dev->multiplanar)
-		buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
-	else if (buf_type == V4L2_BUF_TYPE_VBI_CAPTURE && !dev->has_raw_vbi_cap)
-		buf_type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
-	else if (buf_type == V4L2_BUF_TYPE_VBI_OUTPUT && !dev->has_raw_vbi_out)
-		buf_type = V4L2_BUF_TYPE_SLICED_VBI_OUTPUT;
-
-	q->type = buf_type;
-	q->io_modes = VB2_MMAP | VB2_DMABUF;
-	q->io_modes |= V4L2_TYPE_IS_OUTPUT(buf_type) ?  VB2_WRITE : VB2_READ;
-	if (allocators[dev->inst] != 1)
-		q->io_modes |= VB2_USERPTR;
-	q->drv_priv = dev;
-	q->buf_struct_size = sizeof(struct vivid_buffer);
-	q->ops = ops;
-	q->mem_ops = allocators[dev->inst] == 1 ? &vb2_dma_contig_memops :
-						  &vb2_vmalloc_memops;
-	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
-	q->min_buffers_needed = min_buffers_needed;
-	q->lock = &dev->mutex;
-	q->dev = dev->v4l2_dev.dev;
-	q->supports_requests = true;
-
-	return vb2_queue_init(q);
-}
-
-static int vivid_create_instance(struct platform_device *pdev, int inst)
-{
-	static const struct v4l2_dv_timings def_dv_timings =
-					V4L2_DV_BT_CEA_1280X720P60;
-	unsigned in_type_counter[4] = { 0, 0, 0, 0 };
-	unsigned out_type_counter[4] = { 0, 0, 0, 0 };
-	int ccs_cap = ccs_cap_mode[inst];
-	int ccs_out = ccs_out_mode[inst];
-	bool has_tuner;
-	bool has_modulator;
-	struct vivid_dev *dev;
-	struct video_device *vfd;
-	unsigned node_type = node_types[inst];
-	v4l2_std_id tvnorms_cap = 0, tvnorms_out = 0;
-	int ret;
-	int i;
-#ifdef CONFIG_VIDEO_VIVID_CEC
-	unsigned int cec_tx_bus_cnt = 0;
-#endif
-
-	/* allocate main vivid state structure */
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	dev->inst = inst;
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-	dev->v4l2_dev.mdev = &dev->mdev;
-
-	/* Initialize media device */
-	strscpy(dev->mdev.model, VIVID_MODULE_NAME, sizeof(dev->mdev.model));
-	snprintf(dev->mdev.bus_info, sizeof(dev->mdev.bus_info),
-		 "platform:%s-%03d", VIVID_MODULE_NAME, inst);
-	dev->mdev.dev = &pdev->dev;
-	media_device_init(&dev->mdev);
-	dev->mdev.ops = &vivid_media_ops;
-#endif
-
-	/* register v4l2_device */
-	snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name),
-			"%s-%03d", VIVID_MODULE_NAME, inst);
-	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
-	if (ret) {
-		kfree(dev);
-		return ret;
-	}
-	dev->v4l2_dev.release = vivid_dev_release;
-
-	/* start detecting feature set */
-
-	/* do we use single- or multi-planar? */
-	dev->multiplanar = multiplanar[inst] > 1;
-	v4l2_info(&dev->v4l2_dev, "using %splanar format API\n",
-			dev->multiplanar ? "multi" : "single ");
-
-	/* how many inputs do we have and of what type? */
-	dev->num_inputs = num_inputs[inst];
-	if (dev->num_inputs < 1)
-		dev->num_inputs = 1;
-	if (dev->num_inputs >= MAX_INPUTS)
-		dev->num_inputs = MAX_INPUTS;
-	for (i = 0; i < dev->num_inputs; i++) {
-		dev->input_type[i] = (input_types[inst] >> (i * 2)) & 0x3;
-		dev->input_name_counter[i] = in_type_counter[dev->input_type[i]]++;
-	}
-	dev->has_audio_inputs = in_type_counter[TV] && in_type_counter[SVID];
-	if (in_type_counter[HDMI] == 16) {
-		/* The CEC physical address only allows for max 15 inputs */
-		in_type_counter[HDMI]--;
-		dev->num_inputs--;
-	}
-	dev->num_hdmi_inputs = in_type_counter[HDMI];
-
-	/* how many outputs do we have and of what type? */
-	dev->num_outputs = num_outputs[inst];
-	if (dev->num_outputs < 1)
-		dev->num_outputs = 1;
-	if (dev->num_outputs >= MAX_OUTPUTS)
-		dev->num_outputs = MAX_OUTPUTS;
-	for (i = 0; i < dev->num_outputs; i++) {
-		dev->output_type[i] = ((output_types[inst] >> i) & 1) ? HDMI : SVID;
-		dev->output_name_counter[i] = out_type_counter[dev->output_type[i]]++;
-		dev->display_present[i] = true;
-	}
-	dev->has_audio_outputs = out_type_counter[SVID];
-	if (out_type_counter[HDMI] == 16) {
-		/*
-		 * The CEC physical address only allows for max 15 inputs,
-		 * so outputs are also limited to 15 to allow for easy
-		 * CEC output to input mapping.
-		 */
-		out_type_counter[HDMI]--;
-		dev->num_outputs--;
-	}
-	dev->num_hdmi_outputs = out_type_counter[HDMI];
-
-	/* do we create a video capture device? */
-	dev->has_vid_cap = node_type & 0x0001;
-
-	/* do we create a vbi capture device? */
-	if (in_type_counter[TV] || in_type_counter[SVID]) {
-		dev->has_raw_vbi_cap = node_type & 0x0004;
-		dev->has_sliced_vbi_cap = node_type & 0x0008;
-		dev->has_vbi_cap = dev->has_raw_vbi_cap | dev->has_sliced_vbi_cap;
-	}
-
-	/* do we create a meta capture device */
-	dev->has_meta_cap = node_type & 0x20000;
-
-	/* sanity checks */
-	if ((in_type_counter[WEBCAM] || in_type_counter[HDMI]) &&
-	    !dev->has_vid_cap && !dev->has_meta_cap) {
-		v4l2_warn(&dev->v4l2_dev,
-			  "Webcam or HDMI input without video or metadata nodes\n");
-		kfree(dev);
-		return -EINVAL;
-	}
-	if ((in_type_counter[TV] || in_type_counter[SVID]) &&
-	    !dev->has_vid_cap && !dev->has_vbi_cap && !dev->has_meta_cap) {
-		v4l2_warn(&dev->v4l2_dev,
-			  "TV or S-Video input without video, VBI or metadata nodes\n");
-		kfree(dev);
-		return -EINVAL;
-	}
-
-	/* do we create a video output device? */
-	dev->has_vid_out = node_type & 0x0100;
-
-	/* do we create a vbi output device? */
-	if (out_type_counter[SVID]) {
-		dev->has_raw_vbi_out = node_type & 0x0400;
-		dev->has_sliced_vbi_out = node_type & 0x0800;
-		dev->has_vbi_out = dev->has_raw_vbi_out | dev->has_sliced_vbi_out;
-	}
-
-	/* do we create a metadata output device */
-	dev->has_meta_out = node_type & 0x40000;
-
-	/* sanity checks */
-	if (out_type_counter[SVID] &&
-	    !dev->has_vid_out && !dev->has_vbi_out && !dev->has_meta_out) {
-		v4l2_warn(&dev->v4l2_dev,
-			  "S-Video output without video, VBI or metadata nodes\n");
-		kfree(dev);
-		return -EINVAL;
-	}
-	if (out_type_counter[HDMI] && !dev->has_vid_out && !dev->has_meta_out) {
-		v4l2_warn(&dev->v4l2_dev,
-			  "HDMI output without video or metadata nodes\n");
-		kfree(dev);
-		return -EINVAL;
-	}
-
-	/* do we create a radio receiver device? */
-	dev->has_radio_rx = node_type & 0x0010;
-
-	/* do we create a radio transmitter device? */
-	dev->has_radio_tx = node_type & 0x1000;
-
-	/* do we create a software defined radio capture device? */
-	dev->has_sdr_cap = node_type & 0x0020;
-
-	/* do we have a TV tuner? */
-	dev->has_tv_tuner = in_type_counter[TV];
-
-	/* do we have a tuner? */
-	has_tuner = ((dev->has_vid_cap || dev->has_vbi_cap) && in_type_counter[TV]) ||
-		    dev->has_radio_rx || dev->has_sdr_cap;
-
-	/* do we have a modulator? */
-	has_modulator = dev->has_radio_tx;
-
-	if (dev->has_vid_cap)
-		/* do we have a framebuffer for overlay testing? */
-		dev->has_fb = node_type & 0x10000;
-
-	/* can we do crop/compose/scaling while capturing? */
-	if (no_error_inj && ccs_cap == -1)
-		ccs_cap = 7;
-
-	/* if ccs_cap == -1, then the user can select it using controls */
-	if (ccs_cap != -1) {
-		dev->has_crop_cap = ccs_cap & 1;
-		dev->has_compose_cap = ccs_cap & 2;
-		dev->has_scaler_cap = ccs_cap & 4;
-		v4l2_info(&dev->v4l2_dev, "Capture Crop: %c Compose: %c Scaler: %c\n",
-			dev->has_crop_cap ? 'Y' : 'N',
-			dev->has_compose_cap ? 'Y' : 'N',
-			dev->has_scaler_cap ? 'Y' : 'N');
-	}
-
-	/* can we do crop/compose/scaling with video output? */
-	if (no_error_inj && ccs_out == -1)
-		ccs_out = 7;
-
-	/* if ccs_out == -1, then the user can select it using controls */
-	if (ccs_out != -1) {
-		dev->has_crop_out = ccs_out & 1;
-		dev->has_compose_out = ccs_out & 2;
-		dev->has_scaler_out = ccs_out & 4;
-		v4l2_info(&dev->v4l2_dev, "Output Crop: %c Compose: %c Scaler: %c\n",
-			dev->has_crop_out ? 'Y' : 'N',
-			dev->has_compose_out ? 'Y' : 'N',
-			dev->has_scaler_out ? 'Y' : 'N');
-	}
-
-	/* do we create a touch capture device */
-	dev->has_touch_cap = node_type & 0x80000;
-
-	/* end detecting feature set */
-
-	if (dev->has_vid_cap) {
-		/* set up the capabilities of the video capture device */
-		dev->vid_cap_caps = dev->multiplanar ?
-			V4L2_CAP_VIDEO_CAPTURE_MPLANE :
-			V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY;
-		dev->vid_cap_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
-		if (dev->has_audio_inputs)
-			dev->vid_cap_caps |= V4L2_CAP_AUDIO;
-		if (dev->has_tv_tuner)
-			dev->vid_cap_caps |= V4L2_CAP_TUNER;
-	}
-	if (dev->has_vid_out) {
-		/* set up the capabilities of the video output device */
-		dev->vid_out_caps = dev->multiplanar ?
-			V4L2_CAP_VIDEO_OUTPUT_MPLANE :
-			V4L2_CAP_VIDEO_OUTPUT;
-		if (dev->has_fb)
-			dev->vid_out_caps |= V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
-		dev->vid_out_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
-		if (dev->has_audio_outputs)
-			dev->vid_out_caps |= V4L2_CAP_AUDIO;
-	}
-	if (dev->has_vbi_cap) {
-		/* set up the capabilities of the vbi capture device */
-		dev->vbi_cap_caps = (dev->has_raw_vbi_cap ? V4L2_CAP_VBI_CAPTURE : 0) |
-				    (dev->has_sliced_vbi_cap ? V4L2_CAP_SLICED_VBI_CAPTURE : 0);
-		dev->vbi_cap_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
-		if (dev->has_audio_inputs)
-			dev->vbi_cap_caps |= V4L2_CAP_AUDIO;
-		if (dev->has_tv_tuner)
-			dev->vbi_cap_caps |= V4L2_CAP_TUNER;
-	}
-	if (dev->has_vbi_out) {
-		/* set up the capabilities of the vbi output device */
-		dev->vbi_out_caps = (dev->has_raw_vbi_out ? V4L2_CAP_VBI_OUTPUT : 0) |
-				    (dev->has_sliced_vbi_out ? V4L2_CAP_SLICED_VBI_OUTPUT : 0);
-		dev->vbi_out_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
-		if (dev->has_audio_outputs)
-			dev->vbi_out_caps |= V4L2_CAP_AUDIO;
-	}
-	if (dev->has_sdr_cap) {
-		/* set up the capabilities of the sdr capture device */
-		dev->sdr_cap_caps = V4L2_CAP_SDR_CAPTURE | V4L2_CAP_TUNER;
-		dev->sdr_cap_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
-	}
-	/* set up the capabilities of the radio receiver device */
-	if (dev->has_radio_rx)
-		dev->radio_rx_caps = V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE |
-				     V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_TUNER |
-				     V4L2_CAP_READWRITE;
-	/* set up the capabilities of the radio transmitter device */
-	if (dev->has_radio_tx)
-		dev->radio_tx_caps = V4L2_CAP_RDS_OUTPUT | V4L2_CAP_MODULATOR |
-				     V4L2_CAP_READWRITE;
-
-	/* set up the capabilities of meta capture device */
-	if (dev->has_meta_cap) {
-		dev->meta_cap_caps = V4L2_CAP_META_CAPTURE |
-				     V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
-		if (dev->has_audio_inputs)
-			dev->meta_cap_caps |= V4L2_CAP_AUDIO;
-		if (dev->has_tv_tuner)
-			dev->meta_cap_caps |= V4L2_CAP_TUNER;
-	}
-	/* set up the capabilities of meta output device */
-	if (dev->has_meta_out) {
-		dev->meta_out_caps = V4L2_CAP_META_OUTPUT |
-				     V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
-		if (dev->has_audio_outputs)
-			dev->meta_out_caps |= V4L2_CAP_AUDIO;
-	}
-	/* set up the capabilities of the touch capture device */
-	if (dev->has_touch_cap) {
-		dev->touch_cap_caps = V4L2_CAP_TOUCH | V4L2_CAP_STREAMING |
-				      V4L2_CAP_READWRITE;
-		dev->touch_cap_caps |= dev->multiplanar ?
-			V4L2_CAP_VIDEO_CAPTURE_MPLANE : V4L2_CAP_VIDEO_CAPTURE;
-	}
-
-	ret = -ENOMEM;
-	/* initialize the test pattern generator */
-	tpg_init(&dev->tpg, 640, 360);
-	if (tpg_alloc(&dev->tpg, MAX_ZOOM * MAX_WIDTH))
-		goto free_dev;
-	dev->scaled_line = vzalloc(array_size(MAX_WIDTH, MAX_ZOOM));
-	if (!dev->scaled_line)
-		goto free_dev;
-	dev->blended_line = vzalloc(array_size(MAX_WIDTH, MAX_ZOOM));
-	if (!dev->blended_line)
-		goto free_dev;
-
-	/* load the edid */
-	dev->edid = vmalloc(256 * 128);
-	if (!dev->edid)
-		goto free_dev;
-
-	while (v4l2_dv_timings_presets[dev->query_dv_timings_size].bt.width)
-		dev->query_dv_timings_size++;
-
-	/*
-	 * Create a char pointer array that points to the names of all the
-	 * preset timings
-	 */
-	dev->query_dv_timings_qmenu = kmalloc_array(dev->query_dv_timings_size,
-						    sizeof(char *), GFP_KERNEL);
-	/*
-	 * Create a string array containing the names of all the preset
-	 * timings. Each name is max 31 chars long (+ terminating 0).
-	 */
-	dev->query_dv_timings_qmenu_strings =
-		kmalloc_array(dev->query_dv_timings_size, 32, GFP_KERNEL);
-
-	if (!dev->query_dv_timings_qmenu ||
-	    !dev->query_dv_timings_qmenu_strings)
-		goto free_dev;
-
-	for (i = 0; i < dev->query_dv_timings_size; i++) {
-		const struct v4l2_bt_timings *bt = &v4l2_dv_timings_presets[i].bt;
-		char *p = dev->query_dv_timings_qmenu_strings + i * 32;
-		u32 htot, vtot;
-
-		dev->query_dv_timings_qmenu[i] = p;
-
-		htot = V4L2_DV_BT_FRAME_WIDTH(bt);
-		vtot = V4L2_DV_BT_FRAME_HEIGHT(bt);
-		snprintf(p, 32, "%ux%u%s%u",
-			bt->width, bt->height, bt->interlaced ? "i" : "p",
-			(u32)bt->pixelclock / (htot * vtot));
-	}
-
-	/* disable invalid ioctls based on the feature set */
-	if (!dev->has_audio_inputs) {
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_AUDIO);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_AUDIO);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_ENUMAUDIO);
-		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_S_AUDIO);
-		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_G_AUDIO);
-		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_ENUMAUDIO);
-		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_S_AUDIO);
-		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_G_AUDIO);
-		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_ENUMAUDIO);
-	}
-	if (!dev->has_audio_outputs) {
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_AUDOUT);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_AUDOUT);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUMAUDOUT);
-		v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_S_AUDOUT);
-		v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_G_AUDOUT);
-		v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_ENUMAUDOUT);
-		v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_S_AUDOUT);
-		v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_G_AUDOUT);
-		v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_ENUMAUDOUT);
-	}
-	if (!in_type_counter[TV] && !in_type_counter[SVID]) {
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_STD);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_STD);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_ENUMSTD);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_QUERYSTD);
-	}
-	if (!out_type_counter[SVID]) {
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_STD);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_STD);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUMSTD);
-	}
-	if (!has_tuner && !has_modulator) {
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_FREQUENCY);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_FREQUENCY);
-		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_S_FREQUENCY);
-		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_G_FREQUENCY);
-		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_S_FREQUENCY);
-		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_G_FREQUENCY);
-	}
-	if (!has_tuner) {
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_TUNER);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_TUNER);
-		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_S_TUNER);
-		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_G_TUNER);
-		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_S_TUNER);
-		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_G_TUNER);
-	}
-	if (in_type_counter[HDMI] == 0) {
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_EDID);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_EDID);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_DV_TIMINGS_CAP);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_DV_TIMINGS);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_DV_TIMINGS);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_ENUM_DV_TIMINGS);
-		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_QUERY_DV_TIMINGS);
-	}
-	if (out_type_counter[HDMI] == 0) {
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_EDID);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_DV_TIMINGS_CAP);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_DV_TIMINGS);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_DV_TIMINGS);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUM_DV_TIMINGS);
-	}
-	if (!dev->has_fb) {
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_FBUF);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_FBUF);
-		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_OVERLAY);
-	}
-	v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_HW_FREQ_SEEK);
-	v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_S_HW_FREQ_SEEK);
-	v4l2_disable_ioctl(&dev->sdr_cap_dev, VIDIOC_S_HW_FREQ_SEEK);
-	v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_S_HW_FREQ_SEEK);
-	v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_FREQUENCY);
-	v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_FREQUENCY);
-	v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUM_FRAMESIZES);
-	v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUM_FRAMEINTERVALS);
-	v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_S_FREQUENCY);
-	v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_G_FREQUENCY);
-	v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_S_FREQUENCY);
-	v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_G_FREQUENCY);
-	v4l2_disable_ioctl(&dev->touch_cap_dev, VIDIOC_S_PARM);
-	v4l2_disable_ioctl(&dev->touch_cap_dev, VIDIOC_ENUM_FRAMESIZES);
-	v4l2_disable_ioctl(&dev->touch_cap_dev, VIDIOC_ENUM_FRAMEINTERVALS);
-
-	/* configure internal data */
-	dev->fmt_cap = &vivid_formats[0];
-	dev->fmt_out = &vivid_formats[0];
-	if (!dev->multiplanar)
-		vivid_formats[0].data_offset[0] = 0;
-	dev->webcam_size_idx = 1;
-	dev->webcam_ival_idx = 3;
-	tpg_s_fourcc(&dev->tpg, dev->fmt_cap->fourcc);
-	dev->std_out = V4L2_STD_PAL;
-	if (dev->input_type[0] == TV || dev->input_type[0] == SVID)
-		tvnorms_cap = V4L2_STD_ALL;
-	if (dev->output_type[0] == SVID)
-		tvnorms_out = V4L2_STD_ALL;
-	for (i = 0; i < MAX_INPUTS; i++) {
-		dev->dv_timings_cap[i] = def_dv_timings;
-		dev->std_cap[i] = V4L2_STD_PAL;
-	}
-	dev->dv_timings_out = def_dv_timings;
-	dev->tv_freq = 2804 /* 175.25 * 16 */;
-	dev->tv_audmode = V4L2_TUNER_MODE_STEREO;
-	dev->tv_field_cap = V4L2_FIELD_INTERLACED;
-	dev->tv_field_out = V4L2_FIELD_INTERLACED;
-	dev->radio_rx_freq = 95000 * 16;
-	dev->radio_rx_audmode = V4L2_TUNER_MODE_STEREO;
-	if (dev->has_radio_tx) {
-		dev->radio_tx_freq = 95500 * 16;
-		dev->radio_rds_loop = false;
-	}
-	dev->radio_tx_subchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_RDS;
-	dev->sdr_adc_freq = 300000;
-	dev->sdr_fm_freq = 50000000;
-	dev->sdr_pixelformat = V4L2_SDR_FMT_CU8;
-	dev->sdr_buffersize = SDR_CAP_SAMPLES_PER_BUF * 2;
-
-	dev->edid_max_blocks = dev->edid_blocks = 2;
-	memcpy(dev->edid, vivid_hdmi_edid, sizeof(vivid_hdmi_edid));
-	dev->radio_rds_init_time = ktime_get();
-
-	/* create all controls */
-	ret = vivid_create_controls(dev, ccs_cap == -1, ccs_out == -1, no_error_inj,
-			in_type_counter[TV] || in_type_counter[SVID] ||
-			out_type_counter[SVID],
-			in_type_counter[HDMI] || out_type_counter[HDMI]);
-	if (ret)
-		goto unreg_dev;
-
-	/* enable/disable interface specific controls */
-	if (dev->num_outputs && dev->output_type[0] != HDMI)
-		v4l2_ctrl_activate(dev->ctrl_display_present, false);
-	if (dev->num_inputs && dev->input_type[0] != HDMI) {
-		v4l2_ctrl_activate(dev->ctrl_dv_timings_signal_mode, false);
-		v4l2_ctrl_activate(dev->ctrl_dv_timings, false);
-	} else if (dev->num_inputs && dev->input_type[0] == HDMI) {
-		v4l2_ctrl_activate(dev->ctrl_std_signal_mode, false);
-		v4l2_ctrl_activate(dev->ctrl_standard, false);
-	}
-
-	/*
-	 * update the capture and output formats to do a proper initial
-	 * configuration.
-	 */
-	vivid_update_format_cap(dev, false);
-	vivid_update_format_out(dev);
-
-	/* initialize overlay */
-	dev->fb_cap.fmt.width = dev->src_rect.width;
-	dev->fb_cap.fmt.height = dev->src_rect.height;
-	dev->fb_cap.fmt.pixelformat = dev->fmt_cap->fourcc;
-	dev->fb_cap.fmt.bytesperline = dev->src_rect.width * tpg_g_twopixelsize(&dev->tpg, 0) / 2;
-	dev->fb_cap.fmt.sizeimage = dev->src_rect.height * dev->fb_cap.fmt.bytesperline;
-
-	/* update touch configuration */
-	dev->timeperframe_tch_cap.numerator = 1;
-	dev->timeperframe_tch_cap.denominator = 10;
-	vivid_set_touch(dev, 0);
-
-	/* initialize locks */
-	spin_lock_init(&dev->slock);
-	mutex_init(&dev->mutex);
-
-	/* init dma queues */
-	INIT_LIST_HEAD(&dev->vid_cap_active);
-	INIT_LIST_HEAD(&dev->vid_out_active);
-	INIT_LIST_HEAD(&dev->vbi_cap_active);
-	INIT_LIST_HEAD(&dev->vbi_out_active);
-	INIT_LIST_HEAD(&dev->sdr_cap_active);
-	INIT_LIST_HEAD(&dev->meta_cap_active);
-	INIT_LIST_HEAD(&dev->meta_out_active);
-	INIT_LIST_HEAD(&dev->touch_cap_active);
-
-	INIT_LIST_HEAD(&dev->cec_work_list);
-	spin_lock_init(&dev->cec_slock);
-	/*
-	 * Same as create_singlethread_workqueue, but now I can use the
-	 * string formatting of alloc_ordered_workqueue.
-	 */
-	dev->cec_workqueue =
-		alloc_ordered_workqueue("vivid-%03d-cec", WQ_MEM_RECLAIM, inst);
-	if (!dev->cec_workqueue) {
-		ret = -ENOMEM;
-		goto unreg_dev;
-	}
-
-	if (allocators[inst] == 1)
-		dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-
-	/* start creating the vb2 queues */
-	if (dev->has_vid_cap) {
-		/* initialize vid_cap queue */
-		ret = vivid_create_queue(dev, &dev->vb_vid_cap_q,
-					 V4L2_BUF_TYPE_VIDEO_CAPTURE, 2,
-					 &vivid_vid_cap_qops);
-		if (ret)
-			goto unreg_dev;
-	}
-
-	if (dev->has_vid_out) {
-		/* initialize vid_out queue */
-		ret = vivid_create_queue(dev, &dev->vb_vid_out_q,
-					 V4L2_BUF_TYPE_VIDEO_OUTPUT, 2,
-					 &vivid_vid_out_qops);
-		if (ret)
-			goto unreg_dev;
-	}
-
-	if (dev->has_vbi_cap) {
-		/* initialize vbi_cap queue */
-		ret = vivid_create_queue(dev, &dev->vb_vbi_cap_q,
-					 V4L2_BUF_TYPE_VBI_CAPTURE, 2,
-					 &vivid_vbi_cap_qops);
-		if (ret)
-			goto unreg_dev;
-	}
-
-	if (dev->has_vbi_out) {
-		/* initialize vbi_out queue */
-		ret = vivid_create_queue(dev, &dev->vb_vbi_out_q,
-					 V4L2_BUF_TYPE_VBI_OUTPUT, 2,
-					 &vivid_vbi_out_qops);
-		if (ret)
-			goto unreg_dev;
-	}
-
-	if (dev->has_sdr_cap) {
-		/* initialize sdr_cap queue */
-		ret = vivid_create_queue(dev, &dev->vb_sdr_cap_q,
-					 V4L2_BUF_TYPE_SDR_CAPTURE, 8,
-					 &vivid_sdr_cap_qops);
-		if (ret)
-			goto unreg_dev;
-	}
-
-	if (dev->has_meta_cap) {
-		/* initialize meta_cap queue */
-		ret = vivid_create_queue(dev, &dev->vb_meta_cap_q,
-					 V4L2_BUF_TYPE_META_CAPTURE, 2,
-					 &vivid_meta_cap_qops);
-		if (ret)
-			goto unreg_dev;
-	}
-
-	if (dev->has_meta_out) {
-		/* initialize meta_out queue */
-		ret = vivid_create_queue(dev, &dev->vb_meta_out_q,
-					 V4L2_BUF_TYPE_META_OUTPUT, 1,
-					 &vivid_meta_out_qops);
-		if (ret)
-			goto unreg_dev;
-	}
-
-	if (dev->has_touch_cap) {
-		/* initialize touch_cap queue */
-		ret = vivid_create_queue(dev, &dev->vb_touch_cap_q,
-					 V4L2_BUF_TYPE_VIDEO_CAPTURE, 1,
-					 &vivid_touch_cap_qops);
-		if (ret)
-			goto unreg_dev;
-	}
-
-	if (dev->has_fb) {
-		/* Create framebuffer for testing capture/output overlay */
-		ret = vivid_fb_init(dev);
-		if (ret)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev, "Framebuffer device registered as fb%d\n",
-			  dev->fb_info.node);
-	}
-
-#ifdef CONFIG_VIDEO_VIVID_CEC
-	if (dev->has_vid_cap && in_type_counter[HDMI]) {
-		struct cec_adapter *adap;
-
-		adap = vivid_cec_alloc_adap(dev, 0, false);
-		ret = PTR_ERR_OR_ZERO(adap);
-		if (ret < 0)
-			goto unreg_dev;
-		dev->cec_rx_adap = adap;
-	}
-
-	if (dev->has_vid_out) {
-		for (i = 0; i < dev->num_outputs; i++) {
-			struct cec_adapter *adap;
-
-			if (dev->output_type[i] != HDMI)
-				continue;
-
-			dev->cec_output2bus_map[i] = cec_tx_bus_cnt;
-			adap = vivid_cec_alloc_adap(dev, cec_tx_bus_cnt, true);
-			ret = PTR_ERR_OR_ZERO(adap);
-			if (ret < 0) {
-				for (i = 0; i < dev->num_outputs; i++)
-					cec_delete_adapter(dev->cec_tx_adap[i]);
-				goto unreg_dev;
-			}
-
-			dev->cec_tx_adap[cec_tx_bus_cnt] = adap;
-			cec_tx_bus_cnt++;
-		}
-	}
-#endif
-
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vid_cap);
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vid_out);
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vbi_cap);
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vbi_out);
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_radio_rx);
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_radio_tx);
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_sdr_cap);
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_meta_cap);
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_meta_out);
-	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_touch_cap);
-
-	/* finally start creating the device nodes */
-	if (dev->has_vid_cap) {
-		vfd = &dev->vid_cap_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-vid-cap", inst);
-		vfd->fops = &vivid_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->vid_cap_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->queue = &dev->vb_vid_cap_q;
-		vfd->tvnorms = tvnorms_cap;
-
-		/*
-		 * Provide a mutex to v4l2 core. It will be used to protect
-		 * all fops and v4l2 ioctls.
-		 */
-		vfd->lock = &dev->mutex;
-		video_set_drvdata(vfd, dev);
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-		dev->vid_cap_pad.flags = MEDIA_PAD_FL_SINK;
-		ret = media_entity_pads_init(&vfd->entity, 1, &dev->vid_cap_pad);
-		if (ret)
-			goto unreg_dev;
-#endif
-
-#ifdef CONFIG_VIDEO_VIVID_CEC
-		if (in_type_counter[HDMI]) {
-			ret = cec_register_adapter(dev->cec_rx_adap, &pdev->dev);
-			if (ret < 0) {
-				cec_delete_adapter(dev->cec_rx_adap);
-				dev->cec_rx_adap = NULL;
-				goto unreg_dev;
-			}
-			cec_s_phys_addr(dev->cec_rx_adap, 0, false);
-			v4l2_info(&dev->v4l2_dev, "CEC adapter %s registered for HDMI input 0\n",
-				  dev_name(&dev->cec_rx_adap->devnode.dev));
-		}
-#endif
-
-		ret = video_register_device(vfd, VFL_TYPE_VIDEO, vid_cap_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev, "V4L2 capture device registered as %s\n",
-					  video_device_node_name(vfd));
-	}
-
-	if (dev->has_vid_out) {
-		vfd = &dev->vid_out_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-vid-out", inst);
-		vfd->vfl_dir = VFL_DIR_TX;
-		vfd->fops = &vivid_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->vid_out_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->queue = &dev->vb_vid_out_q;
-		vfd->tvnorms = tvnorms_out;
-
-		/*
-		 * Provide a mutex to v4l2 core. It will be used to protect
-		 * all fops and v4l2 ioctls.
-		 */
-		vfd->lock = &dev->mutex;
-		video_set_drvdata(vfd, dev);
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-		dev->vid_out_pad.flags = MEDIA_PAD_FL_SOURCE;
-		ret = media_entity_pads_init(&vfd->entity, 1, &dev->vid_out_pad);
-		if (ret)
-			goto unreg_dev;
-#endif
-
-#ifdef CONFIG_VIDEO_VIVID_CEC
-		for (i = 0; i < cec_tx_bus_cnt; i++) {
-			ret = cec_register_adapter(dev->cec_tx_adap[i], &pdev->dev);
-			if (ret < 0) {
-				for (; i < cec_tx_bus_cnt; i++) {
-					cec_delete_adapter(dev->cec_tx_adap[i]);
-					dev->cec_tx_adap[i] = NULL;
-				}
-				goto unreg_dev;
-			}
-			v4l2_info(&dev->v4l2_dev, "CEC adapter %s registered for HDMI output %d\n",
-				  dev_name(&dev->cec_tx_adap[i]->devnode.dev), i);
-			if (i < out_type_counter[HDMI])
-				cec_s_phys_addr(dev->cec_tx_adap[i], (i + 1) << 12, false);
-			else
-				cec_s_phys_addr(dev->cec_tx_adap[i], 0x1000, false);
-		}
-#endif
-
-		ret = video_register_device(vfd, VFL_TYPE_VIDEO, vid_out_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev, "V4L2 output device registered as %s\n",
-					  video_device_node_name(vfd));
-	}
-
-	if (dev->has_vbi_cap) {
-		vfd = &dev->vbi_cap_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-vbi-cap", inst);
-		vfd->fops = &vivid_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->vbi_cap_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->queue = &dev->vb_vbi_cap_q;
-		vfd->lock = &dev->mutex;
-		vfd->tvnorms = tvnorms_cap;
-		video_set_drvdata(vfd, dev);
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-		dev->vbi_cap_pad.flags = MEDIA_PAD_FL_SINK;
-		ret = media_entity_pads_init(&vfd->entity, 1, &dev->vbi_cap_pad);
-		if (ret)
-			goto unreg_dev;
-#endif
-
-		ret = video_register_device(vfd, VFL_TYPE_VBI, vbi_cap_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev, "V4L2 capture device registered as %s, supports %s VBI\n",
-					  video_device_node_name(vfd),
-					  (dev->has_raw_vbi_cap && dev->has_sliced_vbi_cap) ?
-					  "raw and sliced" :
-					  (dev->has_raw_vbi_cap ? "raw" : "sliced"));
-	}
-
-	if (dev->has_vbi_out) {
-		vfd = &dev->vbi_out_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-vbi-out", inst);
-		vfd->vfl_dir = VFL_DIR_TX;
-		vfd->fops = &vivid_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->vbi_out_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->queue = &dev->vb_vbi_out_q;
-		vfd->lock = &dev->mutex;
-		vfd->tvnorms = tvnorms_out;
-		video_set_drvdata(vfd, dev);
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-		dev->vbi_out_pad.flags = MEDIA_PAD_FL_SOURCE;
-		ret = media_entity_pads_init(&vfd->entity, 1, &dev->vbi_out_pad);
-		if (ret)
-			goto unreg_dev;
-#endif
-
-		ret = video_register_device(vfd, VFL_TYPE_VBI, vbi_out_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev, "V4L2 output device registered as %s, supports %s VBI\n",
-					  video_device_node_name(vfd),
-					  (dev->has_raw_vbi_out && dev->has_sliced_vbi_out) ?
-					  "raw and sliced" :
-					  (dev->has_raw_vbi_out ? "raw" : "sliced"));
-	}
-
-	if (dev->has_sdr_cap) {
-		vfd = &dev->sdr_cap_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-sdr-cap", inst);
-		vfd->fops = &vivid_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->sdr_cap_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->queue = &dev->vb_sdr_cap_q;
-		vfd->lock = &dev->mutex;
-		video_set_drvdata(vfd, dev);
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-		dev->sdr_cap_pad.flags = MEDIA_PAD_FL_SINK;
-		ret = media_entity_pads_init(&vfd->entity, 1, &dev->sdr_cap_pad);
-		if (ret)
-			goto unreg_dev;
-#endif
-
-		ret = video_register_device(vfd, VFL_TYPE_SDR, sdr_cap_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev, "V4L2 capture device registered as %s\n",
-					  video_device_node_name(vfd));
-	}
-
-	if (dev->has_radio_rx) {
-		vfd = &dev->radio_rx_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-rad-rx", inst);
-		vfd->fops = &vivid_radio_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->radio_rx_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->lock = &dev->mutex;
-		video_set_drvdata(vfd, dev);
-
-		ret = video_register_device(vfd, VFL_TYPE_RADIO, radio_rx_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev, "V4L2 receiver device registered as %s\n",
-					  video_device_node_name(vfd));
-	}
-
-	if (dev->has_radio_tx) {
-		vfd = &dev->radio_tx_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-rad-tx", inst);
-		vfd->vfl_dir = VFL_DIR_TX;
-		vfd->fops = &vivid_radio_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->radio_tx_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->lock = &dev->mutex;
-		video_set_drvdata(vfd, dev);
-
-		ret = video_register_device(vfd, VFL_TYPE_RADIO, radio_tx_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev, "V4L2 transmitter device registered as %s\n",
-					  video_device_node_name(vfd));
-	}
-
-	if (dev->has_meta_cap) {
-		vfd = &dev->meta_cap_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-meta-cap", inst);
-		vfd->fops = &vivid_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->meta_cap_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->queue = &dev->vb_meta_cap_q;
-		vfd->lock = &dev->mutex;
-		vfd->tvnorms = tvnorms_cap;
-		video_set_drvdata(vfd, dev);
-#ifdef CONFIG_MEDIA_CONTROLLER
-		dev->meta_cap_pad.flags = MEDIA_PAD_FL_SINK;
-		ret = media_entity_pads_init(&vfd->entity, 1,
-					     &dev->meta_cap_pad);
-		if (ret)
-			goto unreg_dev;
-#endif
-		ret = video_register_device(vfd, VFL_TYPE_VIDEO,
-					    meta_cap_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev,
-			  "V4L2 metadata capture device registered as %s\n",
-			  video_device_node_name(vfd));
-	}
-
-	if (dev->has_meta_out) {
-		vfd = &dev->meta_out_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-meta-out", inst);
-		vfd->vfl_dir = VFL_DIR_TX;
-		vfd->fops = &vivid_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->meta_out_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->queue = &dev->vb_meta_out_q;
-		vfd->lock = &dev->mutex;
-		vfd->tvnorms = tvnorms_out;
-		video_set_drvdata(vfd, dev);
-#ifdef CONFIG_MEDIA_CONTROLLER
-		dev->meta_out_pad.flags = MEDIA_PAD_FL_SOURCE;
-		ret = media_entity_pads_init(&vfd->entity, 1,
-					     &dev->meta_out_pad);
-		if (ret)
-			goto unreg_dev;
-#endif
-		ret = video_register_device(vfd, VFL_TYPE_VIDEO,
-					    meta_out_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev,
-			  "V4L2 metadata output device registered as %s\n",
-			  video_device_node_name(vfd));
-	}
-
-	if (dev->has_touch_cap) {
-		vfd = &dev->touch_cap_dev;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "vivid-%03d-touch-cap", inst);
-		vfd->fops = &vivid_fops;
-		vfd->ioctl_ops = &vivid_ioctl_ops;
-		vfd->device_caps = dev->touch_cap_caps;
-		vfd->release = video_device_release_empty;
-		vfd->v4l2_dev = &dev->v4l2_dev;
-		vfd->queue = &dev->vb_touch_cap_q;
-		vfd->tvnorms = tvnorms_cap;
-		vfd->lock = &dev->mutex;
-		video_set_drvdata(vfd, dev);
-#ifdef CONFIG_MEDIA_CONTROLLER
-		dev->touch_cap_pad.flags = MEDIA_PAD_FL_SINK;
-		ret = media_entity_pads_init(&vfd->entity, 1,
-					     &dev->touch_cap_pad);
-		if (ret)
-			goto unreg_dev;
-#endif
-		ret = video_register_device(vfd, VFL_TYPE_TOUCH,
-					    touch_cap_nr[inst]);
-		if (ret < 0)
-			goto unreg_dev;
-		v4l2_info(&dev->v4l2_dev,
-			  "V4L2 touch capture device registered as %s\n",
-			  video_device_node_name(vfd));
-	}
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-	/* Register the media device */
-	ret = media_device_register(&dev->mdev);
-	if (ret) {
-		dev_err(dev->mdev.dev,
-			"media device register failed (err=%d)\n", ret);
-		goto unreg_dev;
-	}
-#endif
-
-	/* Now that everything is fine, let's add it to device list */
-	vivid_devs[inst] = dev;
-
-	return 0;
-
-unreg_dev:
-	video_unregister_device(&dev->touch_cap_dev);
-	video_unregister_device(&dev->meta_out_dev);
-	video_unregister_device(&dev->meta_cap_dev);
-	video_unregister_device(&dev->radio_tx_dev);
-	video_unregister_device(&dev->radio_rx_dev);
-	video_unregister_device(&dev->sdr_cap_dev);
-	video_unregister_device(&dev->vbi_out_dev);
-	video_unregister_device(&dev->vbi_cap_dev);
-	video_unregister_device(&dev->vid_out_dev);
-	video_unregister_device(&dev->vid_cap_dev);
-	cec_unregister_adapter(dev->cec_rx_adap);
-	for (i = 0; i < MAX_OUTPUTS; i++)
-		cec_unregister_adapter(dev->cec_tx_adap[i]);
-	if (dev->cec_workqueue) {
-		vivid_cec_bus_free_work(dev);
-		destroy_workqueue(dev->cec_workqueue);
-	}
-free_dev:
-	v4l2_device_put(&dev->v4l2_dev);
-	return ret;
-}
-
-/* This routine allocates from 1 to n_devs virtual drivers.
-
-   The real maximum number of virtual drivers will depend on how many drivers
-   will succeed. This is limited to the maximum number of devices that
-   videodev supports, which is equal to VIDEO_NUM_DEVICES.
- */
-static int vivid_probe(struct platform_device *pdev)
-{
-	const struct font_desc *font = find_font("VGA8x16");
-	int ret = 0, i;
-
-	if (font == NULL) {
-		pr_err("vivid: could not find font\n");
-		return -ENODEV;
-	}
-
-	tpg_set_font(font->data);
-
-	n_devs = clamp_t(unsigned, n_devs, 1, VIVID_MAX_DEVS);
-
-	for (i = 0; i < n_devs; i++) {
-		ret = vivid_create_instance(pdev, i);
-		if (ret) {
-			/* If some instantiations succeeded, keep driver */
-			if (i)
-				ret = 0;
-			break;
-		}
-	}
-
-	if (ret < 0) {
-		pr_err("vivid: error %d while loading driver\n", ret);
-		return ret;
-	}
-
-	/* n_devs will reflect the actual number of allocated devices */
-	n_devs = i;
-
-	return ret;
-}
-
-static int vivid_remove(struct platform_device *pdev)
-{
-	struct vivid_dev *dev;
-	unsigned int i, j;
-
-	for (i = 0; i < n_devs; i++) {
-		dev = vivid_devs[i];
-		if (!dev)
-			continue;
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-		media_device_unregister(&dev->mdev);
-#endif
-
-		if (dev->has_vid_cap) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				video_device_node_name(&dev->vid_cap_dev));
-			video_unregister_device(&dev->vid_cap_dev);
-		}
-		if (dev->has_vid_out) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				video_device_node_name(&dev->vid_out_dev));
-			video_unregister_device(&dev->vid_out_dev);
-		}
-		if (dev->has_vbi_cap) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				video_device_node_name(&dev->vbi_cap_dev));
-			video_unregister_device(&dev->vbi_cap_dev);
-		}
-		if (dev->has_vbi_out) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				video_device_node_name(&dev->vbi_out_dev));
-			video_unregister_device(&dev->vbi_out_dev);
-		}
-		if (dev->has_sdr_cap) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				video_device_node_name(&dev->sdr_cap_dev));
-			video_unregister_device(&dev->sdr_cap_dev);
-		}
-		if (dev->has_radio_rx) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				video_device_node_name(&dev->radio_rx_dev));
-			video_unregister_device(&dev->radio_rx_dev);
-		}
-		if (dev->has_radio_tx) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				video_device_node_name(&dev->radio_tx_dev));
-			video_unregister_device(&dev->radio_tx_dev);
-		}
-		if (dev->has_fb) {
-			v4l2_info(&dev->v4l2_dev, "unregistering fb%d\n",
-				dev->fb_info.node);
-			unregister_framebuffer(&dev->fb_info);
-			vivid_fb_release_buffers(dev);
-		}
-		if (dev->has_meta_cap) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				  video_device_node_name(&dev->meta_cap_dev));
-			video_unregister_device(&dev->meta_cap_dev);
-		}
-		if (dev->has_meta_out) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				  video_device_node_name(&dev->meta_out_dev));
-			video_unregister_device(&dev->meta_out_dev);
-		}
-		if (dev->has_touch_cap) {
-			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
-				  video_device_node_name(&dev->touch_cap_dev));
-			video_unregister_device(&dev->touch_cap_dev);
-		}
-		cec_unregister_adapter(dev->cec_rx_adap);
-		for (j = 0; j < MAX_OUTPUTS; j++)
-			cec_unregister_adapter(dev->cec_tx_adap[j]);
-		if (dev->cec_workqueue) {
-			vivid_cec_bus_free_work(dev);
-			destroy_workqueue(dev->cec_workqueue);
-		}
-		v4l2_device_put(&dev->v4l2_dev);
-		vivid_devs[i] = NULL;
-	}
-	return 0;
-}
-
-static void vivid_pdev_release(struct device *dev)
-{
-}
-
-static struct platform_device vivid_pdev = {
-	.name		= "vivid",
-	.dev.release	= vivid_pdev_release,
-};
-
-static struct platform_driver vivid_pdrv = {
-	.probe		= vivid_probe,
-	.remove		= vivid_remove,
-	.driver		= {
-		.name	= "vivid",
-	},
-};
-
-static int __init vivid_init(void)
-{
-	int ret;
-
-	ret = platform_device_register(&vivid_pdev);
-	if (ret)
-		return ret;
-
-	ret = platform_driver_register(&vivid_pdrv);
-	if (ret)
-		platform_device_unregister(&vivid_pdev);
-
-	return ret;
-}
-
-static void __exit vivid_exit(void)
-{
-	platform_driver_unregister(&vivid_pdrv);
-	platform_device_unregister(&vivid_pdev);
-}
-
-module_init(vivid_init);
-module_exit(vivid_exit);
diff --git a/drivers/media/platform/vivid/vivid-core.h b/drivers/media/platform/vivid/vivid-core.h
deleted file mode 100644
index 99e69b8f770f..000000000000
--- a/drivers/media/platform/vivid/vivid-core.h
+++ /dev/null
@@ -1,612 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-core.h - core datastructures
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_CORE_H_
-#define _VIVID_CORE_H_
-
-#include <linux/fb.h>
-#include <linux/workqueue.h>
-#include <media/cec.h>
-#include <media/videobuf2-v4l2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-dev.h>
-#include <media/v4l2-ctrls.h>
-#include <media/tpg/v4l2-tpg.h>
-#include "vivid-rds-gen.h"
-#include "vivid-vbi-gen.h"
-
-#define dprintk(dev, level, fmt, arg...) \
-	v4l2_dbg(level, vivid_debug, &dev->v4l2_dev, fmt, ## arg)
-
-/* The maximum number of clip rectangles */
-#define MAX_CLIPS  16
-/* The maximum number of inputs */
-#define MAX_INPUTS 16
-/* The maximum number of outputs */
-#define MAX_OUTPUTS 16
-/* The maximum up or down scaling factor is 4 */
-#define MAX_ZOOM  4
-/* The maximum image width/height are set to 4K DMT */
-#define MAX_WIDTH  4096
-#define MAX_HEIGHT 2160
-/* The minimum image width/height */
-#define MIN_WIDTH  16
-#define MIN_HEIGHT 16
-/* The data_offset of plane 0 for the multiplanar formats */
-#define PLANE0_DATA_OFFSET 128
-
-/* The supported TV frequency range in MHz */
-#define MIN_TV_FREQ (44U * 16U)
-#define MAX_TV_FREQ (958U * 16U)
-
-/* The number of samples returned in every SDR buffer */
-#define SDR_CAP_SAMPLES_PER_BUF 0x4000
-
-/* used by the threads to know when to resync internal counters */
-#define JIFFIES_PER_DAY (3600U * 24U * HZ)
-#define JIFFIES_RESYNC (JIFFIES_PER_DAY * (0xf0000000U / JIFFIES_PER_DAY))
-
-extern const struct v4l2_rect vivid_min_rect;
-extern const struct v4l2_rect vivid_max_rect;
-extern unsigned vivid_debug;
-
-struct vivid_fmt {
-	u32	fourcc;          /* v4l2 format id */
-	enum	tgp_color_enc color_enc;
-	bool	can_do_overlay;
-	u8	vdownsampling[TPG_MAX_PLANES];
-	u32	alpha_mask;
-	u8	planes;
-	u8	buffers;
-	u32	data_offset[TPG_MAX_PLANES];
-	u32	bit_depth[TPG_MAX_PLANES];
-};
-
-extern struct vivid_fmt vivid_formats[];
-
-/* buffer for one video frame */
-struct vivid_buffer {
-	/* common v4l buffer stuff -- must be first */
-	struct vb2_v4l2_buffer vb;
-	struct list_head	list;
-};
-
-enum vivid_input {
-	WEBCAM,
-	TV,
-	SVID,
-	HDMI,
-};
-
-enum vivid_signal_mode {
-	CURRENT_DV_TIMINGS,
-	CURRENT_STD = CURRENT_DV_TIMINGS,
-	NO_SIGNAL,
-	NO_LOCK,
-	OUT_OF_RANGE,
-	SELECTED_DV_TIMINGS,
-	SELECTED_STD = SELECTED_DV_TIMINGS,
-	CYCLE_DV_TIMINGS,
-	CYCLE_STD = CYCLE_DV_TIMINGS,
-	CUSTOM_DV_TIMINGS,
-};
-
-enum vivid_colorspace {
-	VIVID_CS_170M,
-	VIVID_CS_709,
-	VIVID_CS_SRGB,
-	VIVID_CS_OPRGB,
-	VIVID_CS_2020,
-	VIVID_CS_DCI_P3,
-	VIVID_CS_240M,
-	VIVID_CS_SYS_M,
-	VIVID_CS_SYS_BG,
-};
-
-#define VIVID_INVALID_SIGNAL(mode) \
-	((mode) == NO_SIGNAL || (mode) == NO_LOCK || (mode) == OUT_OF_RANGE)
-
-struct vivid_cec_work {
-	struct list_head	list;
-	struct delayed_work	work;
-	struct cec_adapter	*adap;
-	struct vivid_dev	*dev;
-	unsigned int		usecs;
-	unsigned int		timeout_ms;
-	u8			tx_status;
-	struct cec_msg		msg;
-};
-
-struct vivid_dev {
-	unsigned			inst;
-	struct v4l2_device		v4l2_dev;
-#ifdef CONFIG_MEDIA_CONTROLLER
-	struct media_device		mdev;
-	struct media_pad		vid_cap_pad;
-	struct media_pad		vid_out_pad;
-	struct media_pad		vbi_cap_pad;
-	struct media_pad		vbi_out_pad;
-	struct media_pad		sdr_cap_pad;
-	struct media_pad		meta_cap_pad;
-	struct media_pad		meta_out_pad;
-	struct media_pad		touch_cap_pad;
-#endif
-	struct v4l2_ctrl_handler	ctrl_hdl_user_gen;
-	struct v4l2_ctrl_handler	ctrl_hdl_user_vid;
-	struct v4l2_ctrl_handler	ctrl_hdl_user_aud;
-	struct v4l2_ctrl_handler	ctrl_hdl_streaming;
-	struct v4l2_ctrl_handler	ctrl_hdl_sdtv_cap;
-	struct v4l2_ctrl_handler	ctrl_hdl_loop_cap;
-	struct v4l2_ctrl_handler	ctrl_hdl_fb;
-	struct video_device		vid_cap_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_vid_cap;
-	struct video_device		vid_out_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_vid_out;
-	struct video_device		vbi_cap_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_vbi_cap;
-	struct video_device		vbi_out_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_vbi_out;
-	struct video_device		radio_rx_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_radio_rx;
-	struct video_device		radio_tx_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_radio_tx;
-	struct video_device		sdr_cap_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_sdr_cap;
-	struct video_device		meta_cap_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_meta_cap;
-	struct video_device		meta_out_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_meta_out;
-	struct video_device		touch_cap_dev;
-	struct v4l2_ctrl_handler	ctrl_hdl_touch_cap;
-
-	spinlock_t			slock;
-	struct mutex			mutex;
-
-	/* capabilities */
-	u32				vid_cap_caps;
-	u32				vid_out_caps;
-	u32				vbi_cap_caps;
-	u32				vbi_out_caps;
-	u32				sdr_cap_caps;
-	u32				radio_rx_caps;
-	u32				radio_tx_caps;
-	u32				meta_cap_caps;
-	u32				meta_out_caps;
-	u32				touch_cap_caps;
-
-	/* supported features */
-	bool				multiplanar;
-	unsigned			num_inputs;
-	unsigned int			num_hdmi_inputs;
-	u8				input_type[MAX_INPUTS];
-	u8				input_name_counter[MAX_INPUTS];
-	unsigned			num_outputs;
-	unsigned int			num_hdmi_outputs;
-	u8				output_type[MAX_OUTPUTS];
-	u8				output_name_counter[MAX_OUTPUTS];
-	bool				has_audio_inputs;
-	bool				has_audio_outputs;
-	bool				has_vid_cap;
-	bool				has_vid_out;
-	bool				has_vbi_cap;
-	bool				has_raw_vbi_cap;
-	bool				has_sliced_vbi_cap;
-	bool				has_vbi_out;
-	bool				has_raw_vbi_out;
-	bool				has_sliced_vbi_out;
-	bool				has_radio_rx;
-	bool				has_radio_tx;
-	bool				has_sdr_cap;
-	bool				has_fb;
-	bool				has_meta_cap;
-	bool				has_meta_out;
-	bool				has_tv_tuner;
-	bool				has_touch_cap;
-
-	bool				can_loop_video;
-
-	/* controls */
-	struct v4l2_ctrl		*brightness;
-	struct v4l2_ctrl		*contrast;
-	struct v4l2_ctrl		*saturation;
-	struct v4l2_ctrl		*hue;
-	struct {
-		/* autogain/gain cluster */
-		struct v4l2_ctrl	*autogain;
-		struct v4l2_ctrl	*gain;
-	};
-	struct v4l2_ctrl		*volume;
-	struct v4l2_ctrl		*mute;
-	struct v4l2_ctrl		*alpha;
-	struct v4l2_ctrl		*button;
-	struct v4l2_ctrl		*boolean;
-	struct v4l2_ctrl		*int32;
-	struct v4l2_ctrl		*int64;
-	struct v4l2_ctrl		*menu;
-	struct v4l2_ctrl		*string;
-	struct v4l2_ctrl		*bitmask;
-	struct v4l2_ctrl		*int_menu;
-	struct v4l2_ctrl		*test_pattern;
-	struct v4l2_ctrl		*colorspace;
-	struct v4l2_ctrl		*rgb_range_cap;
-	struct v4l2_ctrl		*real_rgb_range_cap;
-	struct {
-		/* std_signal_mode/standard cluster */
-		struct v4l2_ctrl	*ctrl_std_signal_mode;
-		struct v4l2_ctrl	*ctrl_standard;
-	};
-	struct {
-		/* dv_timings_signal_mode/timings cluster */
-		struct v4l2_ctrl	*ctrl_dv_timings_signal_mode;
-		struct v4l2_ctrl	*ctrl_dv_timings;
-	};
-	struct v4l2_ctrl		*ctrl_display_present;
-	struct v4l2_ctrl		*ctrl_has_crop_cap;
-	struct v4l2_ctrl		*ctrl_has_compose_cap;
-	struct v4l2_ctrl		*ctrl_has_scaler_cap;
-	struct v4l2_ctrl		*ctrl_has_crop_out;
-	struct v4l2_ctrl		*ctrl_has_compose_out;
-	struct v4l2_ctrl		*ctrl_has_scaler_out;
-	struct v4l2_ctrl		*ctrl_tx_mode;
-	struct v4l2_ctrl		*ctrl_tx_rgb_range;
-	struct v4l2_ctrl		*ctrl_tx_edid_present;
-	struct v4l2_ctrl		*ctrl_tx_hotplug;
-	struct v4l2_ctrl		*ctrl_tx_rxsense;
-
-	struct v4l2_ctrl		*ctrl_rx_power_present;
-
-	struct v4l2_ctrl		*radio_tx_rds_pi;
-	struct v4l2_ctrl		*radio_tx_rds_pty;
-	struct v4l2_ctrl		*radio_tx_rds_mono_stereo;
-	struct v4l2_ctrl		*radio_tx_rds_art_head;
-	struct v4l2_ctrl		*radio_tx_rds_compressed;
-	struct v4l2_ctrl		*radio_tx_rds_dyn_pty;
-	struct v4l2_ctrl		*radio_tx_rds_ta;
-	struct v4l2_ctrl		*radio_tx_rds_tp;
-	struct v4l2_ctrl		*radio_tx_rds_ms;
-	struct v4l2_ctrl		*radio_tx_rds_psname;
-	struct v4l2_ctrl		*radio_tx_rds_radiotext;
-
-	struct v4l2_ctrl		*radio_rx_rds_pty;
-	struct v4l2_ctrl		*radio_rx_rds_ta;
-	struct v4l2_ctrl		*radio_rx_rds_tp;
-	struct v4l2_ctrl		*radio_rx_rds_ms;
-	struct v4l2_ctrl		*radio_rx_rds_psname;
-	struct v4l2_ctrl		*radio_rx_rds_radiotext;
-
-	unsigned			input_brightness[MAX_INPUTS];
-	unsigned			osd_mode;
-	unsigned			button_pressed;
-	bool				sensor_hflip;
-	bool				sensor_vflip;
-	bool				hflip;
-	bool				vflip;
-	bool				vbi_cap_interlaced;
-	bool				loop_video;
-	bool				reduced_fps;
-
-	/* Framebuffer */
-	unsigned long			video_pbase;
-	void				*video_vbase;
-	u32				video_buffer_size;
-	int				display_width;
-	int				display_height;
-	int				display_byte_stride;
-	int				bits_per_pixel;
-	int				bytes_per_pixel;
-	struct fb_info			fb_info;
-	struct fb_var_screeninfo	fb_defined;
-	struct fb_fix_screeninfo	fb_fix;
-
-	/* Error injection */
-	bool				queue_setup_error;
-	bool				buf_prepare_error;
-	bool				start_streaming_error;
-	bool				dqbuf_error;
-	bool				req_validate_error;
-	bool				seq_wrap;
-	bool				time_wrap;
-	u64				time_wrap_offset;
-	unsigned			perc_dropped_buffers;
-	enum vivid_signal_mode		std_signal_mode[MAX_INPUTS];
-	unsigned int			query_std_last[MAX_INPUTS];
-	v4l2_std_id			query_std[MAX_INPUTS];
-	enum tpg_video_aspect		std_aspect_ratio[MAX_INPUTS];
-
-	enum vivid_signal_mode		dv_timings_signal_mode[MAX_INPUTS];
-	char				**query_dv_timings_qmenu;
-	char				*query_dv_timings_qmenu_strings;
-	unsigned			query_dv_timings_size;
-	unsigned int			query_dv_timings_last[MAX_INPUTS];
-	unsigned int			query_dv_timings[MAX_INPUTS];
-	enum tpg_video_aspect		dv_timings_aspect_ratio[MAX_INPUTS];
-
-	/* Input */
-	unsigned			input;
-	v4l2_std_id			std_cap[MAX_INPUTS];
-	struct v4l2_dv_timings		dv_timings_cap[MAX_INPUTS];
-	int				dv_timings_cap_sel[MAX_INPUTS];
-	u32				service_set_cap;
-	struct vivid_vbi_gen_data	vbi_gen;
-	u8				*edid;
-	unsigned			edid_blocks;
-	unsigned			edid_max_blocks;
-	unsigned			webcam_size_idx;
-	unsigned			webcam_ival_idx;
-	unsigned			tv_freq;
-	unsigned			tv_audmode;
-	unsigned			tv_field_cap;
-	unsigned			tv_audio_input;
-
-	u32				power_present;
-
-	/* Capture Overlay */
-	struct v4l2_framebuffer		fb_cap;
-	struct v4l2_fh			*overlay_cap_owner;
-	void				*fb_vbase_cap;
-	int				overlay_cap_top, overlay_cap_left;
-	enum v4l2_field			overlay_cap_field;
-	void				*bitmap_cap;
-	struct v4l2_clip		clips_cap[MAX_CLIPS];
-	struct v4l2_clip		try_clips_cap[MAX_CLIPS];
-	unsigned			clipcount_cap;
-
-	/* Output */
-	unsigned			output;
-	v4l2_std_id			std_out;
-	struct v4l2_dv_timings		dv_timings_out;
-	u32				colorspace_out;
-	u32				ycbcr_enc_out;
-	u32				hsv_enc_out;
-	u32				quantization_out;
-	u32				xfer_func_out;
-	u32				service_set_out;
-	unsigned			bytesperline_out[TPG_MAX_PLANES];
-	unsigned			tv_field_out;
-	unsigned			tv_audio_output;
-	bool				vbi_out_have_wss;
-	u8				vbi_out_wss[2];
-	bool				vbi_out_have_cc[2];
-	u8				vbi_out_cc[2][2];
-	bool				dvi_d_out;
-	u8				*scaled_line;
-	u8				*blended_line;
-	unsigned			cur_scaled_line;
-	bool				display_present[MAX_OUTPUTS];
-
-	/* Output Overlay */
-	void				*fb_vbase_out;
-	bool				overlay_out_enabled;
-	int				overlay_out_top, overlay_out_left;
-	void				*bitmap_out;
-	struct v4l2_clip		clips_out[MAX_CLIPS];
-	struct v4l2_clip		try_clips_out[MAX_CLIPS];
-	unsigned			clipcount_out;
-	unsigned			fbuf_out_flags;
-	u32				chromakey_out;
-	u8				global_alpha_out;
-
-	/* video capture */
-	struct tpg_data			tpg;
-	unsigned			ms_vid_cap;
-	bool				must_blank[VIDEO_MAX_FRAME];
-
-	const struct vivid_fmt		*fmt_cap;
-	struct v4l2_fract		timeperframe_vid_cap;
-	enum v4l2_field			field_cap;
-	struct v4l2_rect		src_rect;
-	struct v4l2_rect		fmt_cap_rect;
-	struct v4l2_rect		crop_cap;
-	struct v4l2_rect		compose_cap;
-	struct v4l2_rect		crop_bounds_cap;
-	struct vb2_queue		vb_vid_cap_q;
-	struct list_head		vid_cap_active;
-	struct vb2_queue		vb_vbi_cap_q;
-	struct list_head		vbi_cap_active;
-	struct vb2_queue		vb_meta_cap_q;
-	struct list_head		meta_cap_active;
-	struct vb2_queue		vb_touch_cap_q;
-	struct list_head		touch_cap_active;
-
-	/* thread for generating video capture stream */
-	struct task_struct		*kthread_vid_cap;
-	unsigned long			jiffies_vid_cap;
-	u64				cap_stream_start;
-	u64				cap_frame_period;
-	u64				cap_frame_eof_offset;
-	u32				cap_seq_offset;
-	u32				cap_seq_count;
-	bool				cap_seq_resync;
-	u32				vid_cap_seq_start;
-	u32				vid_cap_seq_count;
-	bool				vid_cap_streaming;
-	u32				vbi_cap_seq_start;
-	u32				vbi_cap_seq_count;
-	bool				vbi_cap_streaming;
-	bool				stream_sliced_vbi_cap;
-	u32				meta_cap_seq_start;
-	u32				meta_cap_seq_count;
-	bool				meta_cap_streaming;
-
-	/* Touch capture */
-	struct task_struct		*kthread_touch_cap;
-	unsigned long			jiffies_touch_cap;
-	u64				touch_cap_stream_start;
-	u32				touch_cap_seq_offset;
-	bool				touch_cap_seq_resync;
-	u32				touch_cap_seq_start;
-	u32				touch_cap_seq_count;
-	bool				touch_cap_streaming;
-	struct v4l2_fract		timeperframe_tch_cap;
-	struct v4l2_pix_format		tch_format;
-	int				tch_pat_random;
-
-	/* video output */
-	const struct vivid_fmt		*fmt_out;
-	struct v4l2_fract		timeperframe_vid_out;
-	enum v4l2_field			field_out;
-	struct v4l2_rect		sink_rect;
-	struct v4l2_rect		fmt_out_rect;
-	struct v4l2_rect		crop_out;
-	struct v4l2_rect		compose_out;
-	struct v4l2_rect		compose_bounds_out;
-	struct vb2_queue		vb_vid_out_q;
-	struct list_head		vid_out_active;
-	struct vb2_queue		vb_vbi_out_q;
-	struct list_head		vbi_out_active;
-	struct vb2_queue		vb_meta_out_q;
-	struct list_head		meta_out_active;
-
-	/* video loop precalculated rectangles */
-
-	/*
-	 * Intersection between what the output side composes and the capture side
-	 * crops. I.e., what actually needs to be copied from the output buffer to
-	 * the capture buffer.
-	 */
-	struct v4l2_rect		loop_vid_copy;
-	/* The part of the output buffer that (after scaling) corresponds to loop_vid_copy. */
-	struct v4l2_rect		loop_vid_out;
-	/* The part of the capture buffer that (after scaling) corresponds to loop_vid_copy. */
-	struct v4l2_rect		loop_vid_cap;
-	/*
-	 * The intersection of the framebuffer, the overlay output window and
-	 * loop_vid_copy. I.e., the part of the framebuffer that actually should be
-	 * blended with the compose_out rectangle. This uses the framebuffer origin.
-	 */
-	struct v4l2_rect		loop_fb_copy;
-	/* The same as loop_fb_copy but with compose_out origin. */
-	struct v4l2_rect		loop_vid_overlay;
-	/*
-	 * The part of the capture buffer that (after scaling) corresponds
-	 * to loop_vid_overlay.
-	 */
-	struct v4l2_rect		loop_vid_overlay_cap;
-
-	/* thread for generating video output stream */
-	struct task_struct		*kthread_vid_out;
-	unsigned long			jiffies_vid_out;
-	u32				out_seq_offset;
-	u32				out_seq_count;
-	bool				out_seq_resync;
-	u32				vid_out_seq_start;
-	u32				vid_out_seq_count;
-	bool				vid_out_streaming;
-	u32				vbi_out_seq_start;
-	u32				vbi_out_seq_count;
-	bool				vbi_out_streaming;
-	bool				stream_sliced_vbi_out;
-	u32				meta_out_seq_start;
-	u32				meta_out_seq_count;
-	bool				meta_out_streaming;
-
-	/* SDR capture */
-	struct vb2_queue		vb_sdr_cap_q;
-	struct list_head		sdr_cap_active;
-	u32				sdr_pixelformat; /* v4l2 format id */
-	unsigned			sdr_buffersize;
-	unsigned			sdr_adc_freq;
-	unsigned			sdr_fm_freq;
-	unsigned			sdr_fm_deviation;
-	int				sdr_fixp_src_phase;
-	int				sdr_fixp_mod_phase;
-
-	bool				tstamp_src_is_soe;
-	bool				has_crop_cap;
-	bool				has_compose_cap;
-	bool				has_scaler_cap;
-	bool				has_crop_out;
-	bool				has_compose_out;
-	bool				has_scaler_out;
-
-	/* thread for generating SDR stream */
-	struct task_struct		*kthread_sdr_cap;
-	unsigned long			jiffies_sdr_cap;
-	u32				sdr_cap_seq_offset;
-	u32				sdr_cap_seq_count;
-	bool				sdr_cap_seq_resync;
-
-	/* RDS generator */
-	struct vivid_rds_gen		rds_gen;
-
-	/* Radio receiver */
-	unsigned			radio_rx_freq;
-	unsigned			radio_rx_audmode;
-	int				radio_rx_sig_qual;
-	unsigned			radio_rx_hw_seek_mode;
-	bool				radio_rx_hw_seek_prog_lim;
-	bool				radio_rx_rds_controls;
-	bool				radio_rx_rds_enabled;
-	unsigned			radio_rx_rds_use_alternates;
-	unsigned			radio_rx_rds_last_block;
-	struct v4l2_fh			*radio_rx_rds_owner;
-
-	/* Radio transmitter */
-	unsigned			radio_tx_freq;
-	unsigned			radio_tx_subchans;
-	bool				radio_tx_rds_controls;
-	unsigned			radio_tx_rds_last_block;
-	struct v4l2_fh			*radio_tx_rds_owner;
-
-	/* Shared between radio receiver and transmitter */
-	bool				radio_rds_loop;
-	ktime_t				radio_rds_init_time;
-
-	/* CEC */
-	struct cec_adapter		*cec_rx_adap;
-	struct cec_adapter		*cec_tx_adap[MAX_OUTPUTS];
-	struct workqueue_struct		*cec_workqueue;
-	spinlock_t			cec_slock;
-	struct list_head		cec_work_list;
-	unsigned int			cec_xfer_time_jiffies;
-	unsigned long			cec_xfer_start_jiffies;
-	u8				cec_output2bus_map[MAX_OUTPUTS];
-
-	/* CEC OSD String */
-	char				osd[14];
-	unsigned long			osd_jiffies;
-
-	bool				meta_pts;
-	bool				meta_scr;
-};
-
-static inline bool vivid_is_webcam(const struct vivid_dev *dev)
-{
-	return dev->input_type[dev->input] == WEBCAM;
-}
-
-static inline bool vivid_is_tv_cap(const struct vivid_dev *dev)
-{
-	return dev->input_type[dev->input] == TV;
-}
-
-static inline bool vivid_is_svid_cap(const struct vivid_dev *dev)
-{
-	return dev->input_type[dev->input] == SVID;
-}
-
-static inline bool vivid_is_hdmi_cap(const struct vivid_dev *dev)
-{
-	return dev->input_type[dev->input] == HDMI;
-}
-
-static inline bool vivid_is_sdtv_cap(const struct vivid_dev *dev)
-{
-	return vivid_is_tv_cap(dev) || vivid_is_svid_cap(dev);
-}
-
-static inline bool vivid_is_svid_out(const struct vivid_dev *dev)
-{
-	return dev->output_type[dev->output] == SVID;
-}
-
-static inline bool vivid_is_hdmi_out(const struct vivid_dev *dev)
-{
-	return dev->output_type[dev->output] == HDMI;
-}
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-ctrls.c b/drivers/media/platform/vivid/vivid-ctrls.c
deleted file mode 100644
index 334130568dcb..000000000000
--- a/drivers/media/platform/vivid/vivid-ctrls.c
+++ /dev/null
@@ -1,1939 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-ctrls.c - control support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-common.h>
-
-#include "vivid-core.h"
-#include "vivid-vid-cap.h"
-#include "vivid-vid-out.h"
-#include "vivid-vid-common.h"
-#include "vivid-radio-common.h"
-#include "vivid-osd.h"
-#include "vivid-ctrls.h"
-#include "vivid-cec.h"
-
-#define VIVID_CID_CUSTOM_BASE		(V4L2_CID_USER_BASE | 0xf000)
-#define VIVID_CID_BUTTON		(VIVID_CID_CUSTOM_BASE + 0)
-#define VIVID_CID_BOOLEAN		(VIVID_CID_CUSTOM_BASE + 1)
-#define VIVID_CID_INTEGER		(VIVID_CID_CUSTOM_BASE + 2)
-#define VIVID_CID_INTEGER64		(VIVID_CID_CUSTOM_BASE + 3)
-#define VIVID_CID_MENU			(VIVID_CID_CUSTOM_BASE + 4)
-#define VIVID_CID_STRING		(VIVID_CID_CUSTOM_BASE + 5)
-#define VIVID_CID_BITMASK		(VIVID_CID_CUSTOM_BASE + 6)
-#define VIVID_CID_INTMENU		(VIVID_CID_CUSTOM_BASE + 7)
-#define VIVID_CID_U32_ARRAY		(VIVID_CID_CUSTOM_BASE + 8)
-#define VIVID_CID_U16_MATRIX		(VIVID_CID_CUSTOM_BASE + 9)
-#define VIVID_CID_U8_4D_ARRAY		(VIVID_CID_CUSTOM_BASE + 10)
-#define VIVID_CID_AREA			(VIVID_CID_CUSTOM_BASE + 11)
-
-#define VIVID_CID_VIVID_BASE		(0x00f00000 | 0xf000)
-#define VIVID_CID_VIVID_CLASS		(0x00f00000 | 1)
-#define VIVID_CID_TEST_PATTERN		(VIVID_CID_VIVID_BASE + 0)
-#define VIVID_CID_OSD_TEXT_MODE		(VIVID_CID_VIVID_BASE + 1)
-#define VIVID_CID_HOR_MOVEMENT		(VIVID_CID_VIVID_BASE + 2)
-#define VIVID_CID_VERT_MOVEMENT		(VIVID_CID_VIVID_BASE + 3)
-#define VIVID_CID_SHOW_BORDER		(VIVID_CID_VIVID_BASE + 4)
-#define VIVID_CID_SHOW_SQUARE		(VIVID_CID_VIVID_BASE + 5)
-#define VIVID_CID_INSERT_SAV		(VIVID_CID_VIVID_BASE + 6)
-#define VIVID_CID_INSERT_EAV		(VIVID_CID_VIVID_BASE + 7)
-#define VIVID_CID_VBI_CAP_INTERLACED	(VIVID_CID_VIVID_BASE + 8)
-
-#define VIVID_CID_HFLIP			(VIVID_CID_VIVID_BASE + 20)
-#define VIVID_CID_VFLIP			(VIVID_CID_VIVID_BASE + 21)
-#define VIVID_CID_STD_ASPECT_RATIO	(VIVID_CID_VIVID_BASE + 22)
-#define VIVID_CID_DV_TIMINGS_ASPECT_RATIO	(VIVID_CID_VIVID_BASE + 23)
-#define VIVID_CID_TSTAMP_SRC		(VIVID_CID_VIVID_BASE + 24)
-#define VIVID_CID_COLORSPACE		(VIVID_CID_VIVID_BASE + 25)
-#define VIVID_CID_XFER_FUNC		(VIVID_CID_VIVID_BASE + 26)
-#define VIVID_CID_YCBCR_ENC		(VIVID_CID_VIVID_BASE + 27)
-#define VIVID_CID_QUANTIZATION		(VIVID_CID_VIVID_BASE + 28)
-#define VIVID_CID_LIMITED_RGB_RANGE	(VIVID_CID_VIVID_BASE + 29)
-#define VIVID_CID_ALPHA_MODE		(VIVID_CID_VIVID_BASE + 30)
-#define VIVID_CID_HAS_CROP_CAP		(VIVID_CID_VIVID_BASE + 31)
-#define VIVID_CID_HAS_COMPOSE_CAP	(VIVID_CID_VIVID_BASE + 32)
-#define VIVID_CID_HAS_SCALER_CAP	(VIVID_CID_VIVID_BASE + 33)
-#define VIVID_CID_HAS_CROP_OUT		(VIVID_CID_VIVID_BASE + 34)
-#define VIVID_CID_HAS_COMPOSE_OUT	(VIVID_CID_VIVID_BASE + 35)
-#define VIVID_CID_HAS_SCALER_OUT	(VIVID_CID_VIVID_BASE + 36)
-#define VIVID_CID_LOOP_VIDEO		(VIVID_CID_VIVID_BASE + 37)
-#define VIVID_CID_SEQ_WRAP		(VIVID_CID_VIVID_BASE + 38)
-#define VIVID_CID_TIME_WRAP		(VIVID_CID_VIVID_BASE + 39)
-#define VIVID_CID_MAX_EDID_BLOCKS	(VIVID_CID_VIVID_BASE + 40)
-#define VIVID_CID_PERCENTAGE_FILL	(VIVID_CID_VIVID_BASE + 41)
-#define VIVID_CID_REDUCED_FPS		(VIVID_CID_VIVID_BASE + 42)
-#define VIVID_CID_HSV_ENC		(VIVID_CID_VIVID_BASE + 43)
-#define VIVID_CID_DISPLAY_PRESENT	(VIVID_CID_VIVID_BASE + 44)
-
-#define VIVID_CID_STD_SIGNAL_MODE	(VIVID_CID_VIVID_BASE + 60)
-#define VIVID_CID_STANDARD		(VIVID_CID_VIVID_BASE + 61)
-#define VIVID_CID_DV_TIMINGS_SIGNAL_MODE	(VIVID_CID_VIVID_BASE + 62)
-#define VIVID_CID_DV_TIMINGS		(VIVID_CID_VIVID_BASE + 63)
-#define VIVID_CID_PERC_DROPPED		(VIVID_CID_VIVID_BASE + 64)
-#define VIVID_CID_DISCONNECT		(VIVID_CID_VIVID_BASE + 65)
-#define VIVID_CID_DQBUF_ERROR		(VIVID_CID_VIVID_BASE + 66)
-#define VIVID_CID_QUEUE_SETUP_ERROR	(VIVID_CID_VIVID_BASE + 67)
-#define VIVID_CID_BUF_PREPARE_ERROR	(VIVID_CID_VIVID_BASE + 68)
-#define VIVID_CID_START_STR_ERROR	(VIVID_CID_VIVID_BASE + 69)
-#define VIVID_CID_QUEUE_ERROR		(VIVID_CID_VIVID_BASE + 70)
-#define VIVID_CID_CLEAR_FB		(VIVID_CID_VIVID_BASE + 71)
-#define VIVID_CID_REQ_VALIDATE_ERROR	(VIVID_CID_VIVID_BASE + 72)
-
-#define VIVID_CID_RADIO_SEEK_MODE	(VIVID_CID_VIVID_BASE + 90)
-#define VIVID_CID_RADIO_SEEK_PROG_LIM	(VIVID_CID_VIVID_BASE + 91)
-#define VIVID_CID_RADIO_RX_RDS_RBDS	(VIVID_CID_VIVID_BASE + 92)
-#define VIVID_CID_RADIO_RX_RDS_BLOCKIO	(VIVID_CID_VIVID_BASE + 93)
-
-#define VIVID_CID_RADIO_TX_RDS_BLOCKIO	(VIVID_CID_VIVID_BASE + 94)
-
-#define VIVID_CID_SDR_CAP_FM_DEVIATION	(VIVID_CID_VIVID_BASE + 110)
-
-#define VIVID_CID_META_CAP_GENERATE_PTS	(VIVID_CID_VIVID_BASE + 111)
-#define VIVID_CID_META_CAP_GENERATE_SCR	(VIVID_CID_VIVID_BASE + 112)
-
-/* General User Controls */
-
-static int vivid_user_gen_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_user_gen);
-
-	switch (ctrl->id) {
-	case VIVID_CID_DISCONNECT:
-		v4l2_info(&dev->v4l2_dev, "disconnect\n");
-		clear_bit(V4L2_FL_REGISTERED, &dev->vid_cap_dev.flags);
-		clear_bit(V4L2_FL_REGISTERED, &dev->vid_out_dev.flags);
-		clear_bit(V4L2_FL_REGISTERED, &dev->vbi_cap_dev.flags);
-		clear_bit(V4L2_FL_REGISTERED, &dev->vbi_out_dev.flags);
-		clear_bit(V4L2_FL_REGISTERED, &dev->sdr_cap_dev.flags);
-		clear_bit(V4L2_FL_REGISTERED, &dev->radio_rx_dev.flags);
-		clear_bit(V4L2_FL_REGISTERED, &dev->radio_tx_dev.flags);
-		clear_bit(V4L2_FL_REGISTERED, &dev->meta_cap_dev.flags);
-		break;
-	case VIVID_CID_BUTTON:
-		dev->button_pressed = 30;
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_user_gen_ctrl_ops = {
-	.s_ctrl = vivid_user_gen_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_button = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_BUTTON,
-	.name = "Button",
-	.type = V4L2_CTRL_TYPE_BUTTON,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_boolean = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_BOOLEAN,
-	.name = "Boolean",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.min = 0,
-	.max = 1,
-	.step = 1,
-	.def = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_int32 = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_INTEGER,
-	.name = "Integer 32 Bits",
-	.type = V4L2_CTRL_TYPE_INTEGER,
-	.min = 0xffffffff80000000ULL,
-	.max = 0x7fffffff,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_int64 = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_INTEGER64,
-	.name = "Integer 64 Bits",
-	.type = V4L2_CTRL_TYPE_INTEGER64,
-	.min = 0x8000000000000000ULL,
-	.max = 0x7fffffffffffffffLL,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_u32_array = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_U32_ARRAY,
-	.name = "U32 1 Element Array",
-	.type = V4L2_CTRL_TYPE_U32,
-	.def = 0x18,
-	.min = 0x10,
-	.max = 0x20000,
-	.step = 1,
-	.dims = { 1 },
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_u16_matrix = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_U16_MATRIX,
-	.name = "U16 8x16 Matrix",
-	.type = V4L2_CTRL_TYPE_U16,
-	.def = 0x18,
-	.min = 0x10,
-	.max = 0x2000,
-	.step = 1,
-	.dims = { 8, 16 },
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_u8_4d_array = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_U8_4D_ARRAY,
-	.name = "U8 2x3x4x5 Array",
-	.type = V4L2_CTRL_TYPE_U8,
-	.def = 0x18,
-	.min = 0x10,
-	.max = 0x20,
-	.step = 1,
-	.dims = { 2, 3, 4, 5 },
-};
-
-static const char * const vivid_ctrl_menu_strings[] = {
-	"Menu Item 0 (Skipped)",
-	"Menu Item 1",
-	"Menu Item 2 (Skipped)",
-	"Menu Item 3",
-	"Menu Item 4",
-	"Menu Item 5 (Skipped)",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_menu = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_MENU,
-	.name = "Menu",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.min = 1,
-	.max = 4,
-	.def = 3,
-	.menu_skip_mask = 0x04,
-	.qmenu = vivid_ctrl_menu_strings,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_string = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_STRING,
-	.name = "String",
-	.type = V4L2_CTRL_TYPE_STRING,
-	.min = 2,
-	.max = 4,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_bitmask = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_BITMASK,
-	.name = "Bitmask",
-	.type = V4L2_CTRL_TYPE_BITMASK,
-	.def = 0x80002000,
-	.min = 0,
-	.max = 0x80402010,
-	.step = 0,
-};
-
-static const s64 vivid_ctrl_int_menu_values[] = {
-	1, 1, 2, 3, 5, 8, 13, 21, 42,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_int_menu = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_INTMENU,
-	.name = "Integer Menu",
-	.type = V4L2_CTRL_TYPE_INTEGER_MENU,
-	.min = 1,
-	.max = 8,
-	.def = 4,
-	.menu_skip_mask = 0x02,
-	.qmenu_int = vivid_ctrl_int_menu_values,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_disconnect = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_DISCONNECT,
-	.name = "Disconnect",
-	.type = V4L2_CTRL_TYPE_BUTTON,
-};
-
-static const struct v4l2_area area = {
-	.width = 1000,
-	.height = 2000,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_area = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.id = VIVID_CID_AREA,
-	.name = "Area",
-	.type = V4L2_CTRL_TYPE_AREA,
-	.p_def.p_const = &area,
-};
-
-/* Framebuffer Controls */
-
-static int vivid_fb_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler,
-					     struct vivid_dev, ctrl_hdl_fb);
-
-	switch (ctrl->id) {
-	case VIVID_CID_CLEAR_FB:
-		vivid_clear_fb(dev);
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_fb_ctrl_ops = {
-	.s_ctrl = vivid_fb_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_clear_fb = {
-	.ops = &vivid_fb_ctrl_ops,
-	.id = VIVID_CID_CLEAR_FB,
-	.name = "Clear Framebuffer",
-	.type = V4L2_CTRL_TYPE_BUTTON,
-};
-
-
-/* Video User Controls */
-
-static int vivid_user_vid_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_user_vid);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUTOGAIN:
-		dev->gain->val = (jiffies_to_msecs(jiffies) / 1000) & 0xff;
-		break;
-	}
-	return 0;
-}
-
-static int vivid_user_vid_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_user_vid);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		dev->input_brightness[dev->input] = ctrl->val - dev->input * 128;
-		tpg_s_brightness(&dev->tpg, dev->input_brightness[dev->input]);
-		break;
-	case V4L2_CID_CONTRAST:
-		tpg_s_contrast(&dev->tpg, ctrl->val);
-		break;
-	case V4L2_CID_SATURATION:
-		tpg_s_saturation(&dev->tpg, ctrl->val);
-		break;
-	case V4L2_CID_HUE:
-		tpg_s_hue(&dev->tpg, ctrl->val);
-		break;
-	case V4L2_CID_HFLIP:
-		dev->hflip = ctrl->val;
-		tpg_s_hflip(&dev->tpg, dev->sensor_hflip ^ dev->hflip);
-		break;
-	case V4L2_CID_VFLIP:
-		dev->vflip = ctrl->val;
-		tpg_s_vflip(&dev->tpg, dev->sensor_vflip ^ dev->vflip);
-		break;
-	case V4L2_CID_ALPHA_COMPONENT:
-		tpg_s_alpha_component(&dev->tpg, ctrl->val);
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_user_vid_ctrl_ops = {
-	.g_volatile_ctrl = vivid_user_vid_g_volatile_ctrl,
-	.s_ctrl = vivid_user_vid_s_ctrl,
-};
-
-
-/* Video Capture Controls */
-
-static int vivid_vid_cap_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	static const u32 colorspaces[] = {
-		V4L2_COLORSPACE_SMPTE170M,
-		V4L2_COLORSPACE_REC709,
-		V4L2_COLORSPACE_SRGB,
-		V4L2_COLORSPACE_OPRGB,
-		V4L2_COLORSPACE_BT2020,
-		V4L2_COLORSPACE_DCI_P3,
-		V4L2_COLORSPACE_SMPTE240M,
-		V4L2_COLORSPACE_470_SYSTEM_M,
-		V4L2_COLORSPACE_470_SYSTEM_BG,
-	};
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_vid_cap);
-	unsigned int i, j;
-
-	switch (ctrl->id) {
-	case VIVID_CID_TEST_PATTERN:
-		vivid_update_quality(dev);
-		tpg_s_pattern(&dev->tpg, ctrl->val);
-		break;
-	case VIVID_CID_COLORSPACE:
-		tpg_s_colorspace(&dev->tpg, colorspaces[ctrl->val]);
-		vivid_send_source_change(dev, TV);
-		vivid_send_source_change(dev, SVID);
-		vivid_send_source_change(dev, HDMI);
-		vivid_send_source_change(dev, WEBCAM);
-		break;
-	case VIVID_CID_XFER_FUNC:
-		tpg_s_xfer_func(&dev->tpg, ctrl->val);
-		vivid_send_source_change(dev, TV);
-		vivid_send_source_change(dev, SVID);
-		vivid_send_source_change(dev, HDMI);
-		vivid_send_source_change(dev, WEBCAM);
-		break;
-	case VIVID_CID_YCBCR_ENC:
-		tpg_s_ycbcr_enc(&dev->tpg, ctrl->val);
-		vivid_send_source_change(dev, TV);
-		vivid_send_source_change(dev, SVID);
-		vivid_send_source_change(dev, HDMI);
-		vivid_send_source_change(dev, WEBCAM);
-		break;
-	case VIVID_CID_HSV_ENC:
-		tpg_s_hsv_enc(&dev->tpg, ctrl->val ? V4L2_HSV_ENC_256 :
-						     V4L2_HSV_ENC_180);
-		vivid_send_source_change(dev, TV);
-		vivid_send_source_change(dev, SVID);
-		vivid_send_source_change(dev, HDMI);
-		vivid_send_source_change(dev, WEBCAM);
-		break;
-	case VIVID_CID_QUANTIZATION:
-		tpg_s_quantization(&dev->tpg, ctrl->val);
-		vivid_send_source_change(dev, TV);
-		vivid_send_source_change(dev, SVID);
-		vivid_send_source_change(dev, HDMI);
-		vivid_send_source_change(dev, WEBCAM);
-		break;
-	case V4L2_CID_DV_RX_RGB_RANGE:
-		if (!vivid_is_hdmi_cap(dev))
-			break;
-		tpg_s_rgb_range(&dev->tpg, ctrl->val);
-		break;
-	case VIVID_CID_LIMITED_RGB_RANGE:
-		tpg_s_real_rgb_range(&dev->tpg, ctrl->val ?
-				V4L2_DV_RGB_RANGE_LIMITED : V4L2_DV_RGB_RANGE_FULL);
-		break;
-	case VIVID_CID_ALPHA_MODE:
-		tpg_s_alpha_mode(&dev->tpg, ctrl->val);
-		break;
-	case VIVID_CID_HOR_MOVEMENT:
-		tpg_s_mv_hor_mode(&dev->tpg, ctrl->val);
-		break;
-	case VIVID_CID_VERT_MOVEMENT:
-		tpg_s_mv_vert_mode(&dev->tpg, ctrl->val);
-		break;
-	case VIVID_CID_OSD_TEXT_MODE:
-		dev->osd_mode = ctrl->val;
-		break;
-	case VIVID_CID_PERCENTAGE_FILL:
-		tpg_s_perc_fill(&dev->tpg, ctrl->val);
-		for (i = 0; i < VIDEO_MAX_FRAME; i++)
-			dev->must_blank[i] = ctrl->val < 100;
-		break;
-	case VIVID_CID_INSERT_SAV:
-		tpg_s_insert_sav(&dev->tpg, ctrl->val);
-		break;
-	case VIVID_CID_INSERT_EAV:
-		tpg_s_insert_eav(&dev->tpg, ctrl->val);
-		break;
-	case VIVID_CID_HFLIP:
-		dev->sensor_hflip = ctrl->val;
-		tpg_s_hflip(&dev->tpg, dev->sensor_hflip ^ dev->hflip);
-		break;
-	case VIVID_CID_VFLIP:
-		dev->sensor_vflip = ctrl->val;
-		tpg_s_vflip(&dev->tpg, dev->sensor_vflip ^ dev->vflip);
-		break;
-	case VIVID_CID_REDUCED_FPS:
-		dev->reduced_fps = ctrl->val;
-		vivid_update_format_cap(dev, true);
-		break;
-	case VIVID_CID_HAS_CROP_CAP:
-		dev->has_crop_cap = ctrl->val;
-		vivid_update_format_cap(dev, true);
-		break;
-	case VIVID_CID_HAS_COMPOSE_CAP:
-		dev->has_compose_cap = ctrl->val;
-		vivid_update_format_cap(dev, true);
-		break;
-	case VIVID_CID_HAS_SCALER_CAP:
-		dev->has_scaler_cap = ctrl->val;
-		vivid_update_format_cap(dev, true);
-		break;
-	case VIVID_CID_SHOW_BORDER:
-		tpg_s_show_border(&dev->tpg, ctrl->val);
-		break;
-	case VIVID_CID_SHOW_SQUARE:
-		tpg_s_show_square(&dev->tpg, ctrl->val);
-		break;
-	case VIVID_CID_STD_ASPECT_RATIO:
-		dev->std_aspect_ratio[dev->input] = ctrl->val;
-		tpg_s_video_aspect(&dev->tpg, vivid_get_video_aspect(dev));
-		break;
-	case VIVID_CID_DV_TIMINGS_SIGNAL_MODE:
-		dev->dv_timings_signal_mode[dev->input] =
-			dev->ctrl_dv_timings_signal_mode->val;
-		dev->query_dv_timings[dev->input] = dev->ctrl_dv_timings->val;
-
-		dev->power_present = 0;
-		for (i = 0, j = 0;
-		     i < ARRAY_SIZE(dev->dv_timings_signal_mode);
-		     i++)
-			if (dev->input_type[i] == HDMI) {
-				if (dev->dv_timings_signal_mode[i] != NO_SIGNAL)
-					dev->power_present |= (1 << j);
-				j++;
-			}
-		__v4l2_ctrl_s_ctrl(dev->ctrl_rx_power_present,
-				   dev->power_present);
-
-		v4l2_ctrl_activate(dev->ctrl_dv_timings,
-			dev->dv_timings_signal_mode[dev->input] ==
-				SELECTED_DV_TIMINGS);
-
-		vivid_update_quality(dev);
-		vivid_send_source_change(dev, HDMI);
-		break;
-	case VIVID_CID_DV_TIMINGS_ASPECT_RATIO:
-		dev->dv_timings_aspect_ratio[dev->input] = ctrl->val;
-		tpg_s_video_aspect(&dev->tpg, vivid_get_video_aspect(dev));
-		break;
-	case VIVID_CID_TSTAMP_SRC:
-		dev->tstamp_src_is_soe = ctrl->val;
-		dev->vb_vid_cap_q.timestamp_flags &= ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK;
-		if (dev->tstamp_src_is_soe)
-			dev->vb_vid_cap_q.timestamp_flags |= V4L2_BUF_FLAG_TSTAMP_SRC_SOE;
-		break;
-	case VIVID_CID_MAX_EDID_BLOCKS:
-		dev->edid_max_blocks = ctrl->val;
-		if (dev->edid_blocks > dev->edid_max_blocks)
-			dev->edid_blocks = dev->edid_max_blocks;
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_vid_cap_ctrl_ops = {
-	.s_ctrl = vivid_vid_cap_s_ctrl,
-};
-
-static const char * const vivid_ctrl_hor_movement_strings[] = {
-	"Move Left Fast",
-	"Move Left",
-	"Move Left Slow",
-	"No Movement",
-	"Move Right Slow",
-	"Move Right",
-	"Move Right Fast",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_hor_movement = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_HOR_MOVEMENT,
-	.name = "Horizontal Movement",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = TPG_MOVE_POS_FAST,
-	.def = TPG_MOVE_NONE,
-	.qmenu = vivid_ctrl_hor_movement_strings,
-};
-
-static const char * const vivid_ctrl_vert_movement_strings[] = {
-	"Move Up Fast",
-	"Move Up",
-	"Move Up Slow",
-	"No Movement",
-	"Move Down Slow",
-	"Move Down",
-	"Move Down Fast",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_vert_movement = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_VERT_MOVEMENT,
-	.name = "Vertical Movement",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = TPG_MOVE_POS_FAST,
-	.def = TPG_MOVE_NONE,
-	.qmenu = vivid_ctrl_vert_movement_strings,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_show_border = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_SHOW_BORDER,
-	.name = "Show Border",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_show_square = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_SHOW_SQUARE,
-	.name = "Show Square",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const char * const vivid_ctrl_osd_mode_strings[] = {
-	"All",
-	"Counters Only",
-	"None",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_osd_mode = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_OSD_TEXT_MODE,
-	.name = "OSD Text Mode",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = ARRAY_SIZE(vivid_ctrl_osd_mode_strings) - 2,
-	.qmenu = vivid_ctrl_osd_mode_strings,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_perc_fill = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_PERCENTAGE_FILL,
-	.name = "Fill Percentage of Frame",
-	.type = V4L2_CTRL_TYPE_INTEGER,
-	.min = 0,
-	.max = 100,
-	.def = 100,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_insert_sav = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_INSERT_SAV,
-	.name = "Insert SAV Code in Image",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_insert_eav = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_INSERT_EAV,
-	.name = "Insert EAV Code in Image",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_hflip = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_HFLIP,
-	.name = "Sensor Flipped Horizontally",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_vflip = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_VFLIP,
-	.name = "Sensor Flipped Vertically",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_reduced_fps = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_REDUCED_FPS,
-	.name = "Reduced Framerate",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_has_crop_cap = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_HAS_CROP_CAP,
-	.name = "Enable Capture Cropping",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.def = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_has_compose_cap = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_HAS_COMPOSE_CAP,
-	.name = "Enable Capture Composing",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.def = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_has_scaler_cap = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_HAS_SCALER_CAP,
-	.name = "Enable Capture Scaler",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.def = 1,
-	.step = 1,
-};
-
-static const char * const vivid_ctrl_tstamp_src_strings[] = {
-	"End of Frame",
-	"Start of Exposure",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_tstamp_src = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_TSTAMP_SRC,
-	.name = "Timestamp Source",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = ARRAY_SIZE(vivid_ctrl_tstamp_src_strings) - 2,
-	.qmenu = vivid_ctrl_tstamp_src_strings,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_std_aspect_ratio = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_STD_ASPECT_RATIO,
-	.name = "Standard Aspect Ratio",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.min = 1,
-	.max = 4,
-	.def = 1,
-	.qmenu = tpg_aspect_strings,
-};
-
-static const char * const vivid_ctrl_dv_timings_signal_mode_strings[] = {
-	"Current DV Timings",
-	"No Signal",
-	"No Lock",
-	"Out of Range",
-	"Selected DV Timings",
-	"Cycle Through All DV Timings",
-	"Custom DV Timings",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_dv_timings_signal_mode = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_DV_TIMINGS_SIGNAL_MODE,
-	.name = "DV Timings Signal Mode",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = 5,
-	.qmenu = vivid_ctrl_dv_timings_signal_mode_strings,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_dv_timings_aspect_ratio = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_DV_TIMINGS_ASPECT_RATIO,
-	.name = "DV Timings Aspect Ratio",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = 3,
-	.qmenu = tpg_aspect_strings,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_max_edid_blocks = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_MAX_EDID_BLOCKS,
-	.name = "Maximum EDID Blocks",
-	.type = V4L2_CTRL_TYPE_INTEGER,
-	.min = 1,
-	.max = 256,
-	.def = 2,
-	.step = 1,
-};
-
-static const char * const vivid_ctrl_colorspace_strings[] = {
-	"SMPTE 170M",
-	"Rec. 709",
-	"sRGB",
-	"opRGB",
-	"BT.2020",
-	"DCI-P3",
-	"SMPTE 240M",
-	"470 System M",
-	"470 System BG",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_colorspace = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_COLORSPACE,
-	.name = "Colorspace",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = ARRAY_SIZE(vivid_ctrl_colorspace_strings) - 2,
-	.def = 2,
-	.qmenu = vivid_ctrl_colorspace_strings,
-};
-
-static const char * const vivid_ctrl_xfer_func_strings[] = {
-	"Default",
-	"Rec. 709",
-	"sRGB",
-	"opRGB",
-	"SMPTE 240M",
-	"None",
-	"DCI-P3",
-	"SMPTE 2084",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_xfer_func = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_XFER_FUNC,
-	.name = "Transfer Function",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = ARRAY_SIZE(vivid_ctrl_xfer_func_strings) - 2,
-	.qmenu = vivid_ctrl_xfer_func_strings,
-};
-
-static const char * const vivid_ctrl_ycbcr_enc_strings[] = {
-	"Default",
-	"ITU-R 601",
-	"Rec. 709",
-	"xvYCC 601",
-	"xvYCC 709",
-	"",
-	"BT.2020",
-	"BT.2020 Constant Luminance",
-	"SMPTE 240M",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_ycbcr_enc = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_YCBCR_ENC,
-	.name = "Y'CbCr Encoding",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.menu_skip_mask = 1 << 5,
-	.max = ARRAY_SIZE(vivid_ctrl_ycbcr_enc_strings) - 2,
-	.qmenu = vivid_ctrl_ycbcr_enc_strings,
-};
-
-static const char * const vivid_ctrl_hsv_enc_strings[] = {
-	"Hue 0-179",
-	"Hue 0-256",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_hsv_enc = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_HSV_ENC,
-	.name = "HSV Encoding",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = ARRAY_SIZE(vivid_ctrl_hsv_enc_strings) - 2,
-	.qmenu = vivid_ctrl_hsv_enc_strings,
-};
-
-static const char * const vivid_ctrl_quantization_strings[] = {
-	"Default",
-	"Full Range",
-	"Limited Range",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_quantization = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_QUANTIZATION,
-	.name = "Quantization",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = ARRAY_SIZE(vivid_ctrl_quantization_strings) - 2,
-	.qmenu = vivid_ctrl_quantization_strings,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_alpha_mode = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_ALPHA_MODE,
-	.name = "Apply Alpha To Red Only",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_limited_rgb_range = {
-	.ops = &vivid_vid_cap_ctrl_ops,
-	.id = VIVID_CID_LIMITED_RGB_RANGE,
-	.name = "Limited RGB Range (16-235)",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-
-/* Video Loop Control */
-
-static int vivid_loop_cap_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_loop_cap);
-
-	switch (ctrl->id) {
-	case VIVID_CID_LOOP_VIDEO:
-		dev->loop_video = ctrl->val;
-		vivid_update_quality(dev);
-		vivid_send_source_change(dev, SVID);
-		vivid_send_source_change(dev, HDMI);
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_loop_cap_ctrl_ops = {
-	.s_ctrl = vivid_loop_cap_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_loop_video = {
-	.ops = &vivid_loop_cap_ctrl_ops,
-	.id = VIVID_CID_LOOP_VIDEO,
-	.name = "Loop Video",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-
-/* VBI Capture Control */
-
-static int vivid_vbi_cap_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_vbi_cap);
-
-	switch (ctrl->id) {
-	case VIVID_CID_VBI_CAP_INTERLACED:
-		dev->vbi_cap_interlaced = ctrl->val;
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_vbi_cap_ctrl_ops = {
-	.s_ctrl = vivid_vbi_cap_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_vbi_cap_interlaced = {
-	.ops = &vivid_vbi_cap_ctrl_ops,
-	.id = VIVID_CID_VBI_CAP_INTERLACED,
-	.name = "Interlaced VBI Format",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-
-/* Video Output Controls */
-
-static int vivid_vid_out_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_vid_out);
-	struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt;
-	u32 display_present = 0;
-	unsigned int i, j, bus_idx;
-
-	switch (ctrl->id) {
-	case VIVID_CID_HAS_CROP_OUT:
-		dev->has_crop_out = ctrl->val;
-		vivid_update_format_out(dev);
-		break;
-	case VIVID_CID_HAS_COMPOSE_OUT:
-		dev->has_compose_out = ctrl->val;
-		vivid_update_format_out(dev);
-		break;
-	case VIVID_CID_HAS_SCALER_OUT:
-		dev->has_scaler_out = ctrl->val;
-		vivid_update_format_out(dev);
-		break;
-	case V4L2_CID_DV_TX_MODE:
-		dev->dvi_d_out = ctrl->val == V4L2_DV_TX_MODE_DVI_D;
-		if (!vivid_is_hdmi_out(dev))
-			break;
-		if (!dev->dvi_d_out && (bt->flags & V4L2_DV_FL_IS_CE_VIDEO)) {
-			if (bt->width == 720 && bt->height <= 576)
-				dev->colorspace_out = V4L2_COLORSPACE_SMPTE170M;
-			else
-				dev->colorspace_out = V4L2_COLORSPACE_REC709;
-			dev->quantization_out = V4L2_QUANTIZATION_DEFAULT;
-		} else {
-			dev->colorspace_out = V4L2_COLORSPACE_SRGB;
-			dev->quantization_out = dev->dvi_d_out ?
-					V4L2_QUANTIZATION_LIM_RANGE :
-					V4L2_QUANTIZATION_DEFAULT;
-		}
-		if (dev->loop_video)
-			vivid_send_source_change(dev, HDMI);
-		break;
-	case VIVID_CID_DISPLAY_PRESENT:
-		if (dev->output_type[dev->output] != HDMI)
-			break;
-
-		dev->display_present[dev->output] = ctrl->val;
-		for (i = 0, j = 0; i < dev->num_outputs; i++)
-			if (dev->output_type[i] == HDMI)
-				display_present |=
-					dev->display_present[i] << j++;
-
-		__v4l2_ctrl_s_ctrl(dev->ctrl_tx_rxsense, display_present);
-
-		if (dev->edid_blocks) {
-			__v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present,
-					   display_present);
-			__v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug,
-					   display_present);
-		}
-
-		bus_idx = dev->cec_output2bus_map[dev->output];
-		if (!dev->cec_tx_adap[bus_idx])
-			break;
-
-		if (ctrl->val && dev->edid_blocks)
-			cec_s_phys_addr(dev->cec_tx_adap[bus_idx],
-					dev->cec_tx_adap[bus_idx]->phys_addr,
-					false);
-		else
-			cec_phys_addr_invalidate(dev->cec_tx_adap[bus_idx]);
-
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_vid_out_ctrl_ops = {
-	.s_ctrl = vivid_vid_out_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_has_crop_out = {
-	.ops = &vivid_vid_out_ctrl_ops,
-	.id = VIVID_CID_HAS_CROP_OUT,
-	.name = "Enable Output Cropping",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.def = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_has_compose_out = {
-	.ops = &vivid_vid_out_ctrl_ops,
-	.id = VIVID_CID_HAS_COMPOSE_OUT,
-	.name = "Enable Output Composing",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.def = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_has_scaler_out = {
-	.ops = &vivid_vid_out_ctrl_ops,
-	.id = VIVID_CID_HAS_SCALER_OUT,
-	.name = "Enable Output Scaler",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.def = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_display_present = {
-	.ops = &vivid_vid_out_ctrl_ops,
-	.id = VIVID_CID_DISPLAY_PRESENT,
-	.name = "Display Present",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.def = 1,
-	.step = 1,
-};
-
-/* Streaming Controls */
-
-static int vivid_streaming_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_streaming);
-	u64 rem;
-
-	switch (ctrl->id) {
-	case VIVID_CID_DQBUF_ERROR:
-		dev->dqbuf_error = true;
-		break;
-	case VIVID_CID_PERC_DROPPED:
-		dev->perc_dropped_buffers = ctrl->val;
-		break;
-	case VIVID_CID_QUEUE_SETUP_ERROR:
-		dev->queue_setup_error = true;
-		break;
-	case VIVID_CID_BUF_PREPARE_ERROR:
-		dev->buf_prepare_error = true;
-		break;
-	case VIVID_CID_START_STR_ERROR:
-		dev->start_streaming_error = true;
-		break;
-	case VIVID_CID_REQ_VALIDATE_ERROR:
-		dev->req_validate_error = true;
-		break;
-	case VIVID_CID_QUEUE_ERROR:
-		if (vb2_start_streaming_called(&dev->vb_vid_cap_q))
-			vb2_queue_error(&dev->vb_vid_cap_q);
-		if (vb2_start_streaming_called(&dev->vb_vbi_cap_q))
-			vb2_queue_error(&dev->vb_vbi_cap_q);
-		if (vb2_start_streaming_called(&dev->vb_vid_out_q))
-			vb2_queue_error(&dev->vb_vid_out_q);
-		if (vb2_start_streaming_called(&dev->vb_vbi_out_q))
-			vb2_queue_error(&dev->vb_vbi_out_q);
-		if (vb2_start_streaming_called(&dev->vb_sdr_cap_q))
-			vb2_queue_error(&dev->vb_sdr_cap_q);
-		break;
-	case VIVID_CID_SEQ_WRAP:
-		dev->seq_wrap = ctrl->val;
-		break;
-	case VIVID_CID_TIME_WRAP:
-		dev->time_wrap = ctrl->val;
-		if (ctrl->val == 0) {
-			dev->time_wrap_offset = 0;
-			break;
-		}
-		/*
-		 * We want to set the time 16 seconds before the 32 bit tv_sec
-		 * value of struct timeval would wrap around. So first we
-		 * calculate ktime_get_ns() % ((1 << 32) * NSEC_PER_SEC), and
-		 * then we set the offset to ((1 << 32) - 16) * NSEC_PER_SEC).
-		 */
-		div64_u64_rem(ktime_get_ns(),
-			0x100000000ULL * NSEC_PER_SEC, &rem);
-		dev->time_wrap_offset =
-			(0x100000000ULL - 16) * NSEC_PER_SEC - rem;
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_streaming_ctrl_ops = {
-	.s_ctrl = vivid_streaming_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_dqbuf_error = {
-	.ops = &vivid_streaming_ctrl_ops,
-	.id = VIVID_CID_DQBUF_ERROR,
-	.name = "Inject V4L2_BUF_FLAG_ERROR",
-	.type = V4L2_CTRL_TYPE_BUTTON,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_perc_dropped = {
-	.ops = &vivid_streaming_ctrl_ops,
-	.id = VIVID_CID_PERC_DROPPED,
-	.name = "Percentage of Dropped Buffers",
-	.type = V4L2_CTRL_TYPE_INTEGER,
-	.min = 0,
-	.max = 100,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_queue_setup_error = {
-	.ops = &vivid_streaming_ctrl_ops,
-	.id = VIVID_CID_QUEUE_SETUP_ERROR,
-	.name = "Inject VIDIOC_REQBUFS Error",
-	.type = V4L2_CTRL_TYPE_BUTTON,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_buf_prepare_error = {
-	.ops = &vivid_streaming_ctrl_ops,
-	.id = VIVID_CID_BUF_PREPARE_ERROR,
-	.name = "Inject VIDIOC_QBUF Error",
-	.type = V4L2_CTRL_TYPE_BUTTON,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_start_streaming_error = {
-	.ops = &vivid_streaming_ctrl_ops,
-	.id = VIVID_CID_START_STR_ERROR,
-	.name = "Inject VIDIOC_STREAMON Error",
-	.type = V4L2_CTRL_TYPE_BUTTON,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_queue_error = {
-	.ops = &vivid_streaming_ctrl_ops,
-	.id = VIVID_CID_QUEUE_ERROR,
-	.name = "Inject Fatal Streaming Error",
-	.type = V4L2_CTRL_TYPE_BUTTON,
-};
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-static const struct v4l2_ctrl_config vivid_ctrl_req_validate_error = {
-	.ops = &vivid_streaming_ctrl_ops,
-	.id = VIVID_CID_REQ_VALIDATE_ERROR,
-	.name = "Inject req_validate() Error",
-	.type = V4L2_CTRL_TYPE_BUTTON,
-};
-#endif
-
-static const struct v4l2_ctrl_config vivid_ctrl_seq_wrap = {
-	.ops = &vivid_streaming_ctrl_ops,
-	.id = VIVID_CID_SEQ_WRAP,
-	.name = "Wrap Sequence Number",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_time_wrap = {
-	.ops = &vivid_streaming_ctrl_ops,
-	.id = VIVID_CID_TIME_WRAP,
-	.name = "Wrap Timestamp",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-
-/* SDTV Capture Controls */
-
-static int vivid_sdtv_cap_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_sdtv_cap);
-
-	switch (ctrl->id) {
-	case VIVID_CID_STD_SIGNAL_MODE:
-		dev->std_signal_mode[dev->input] =
-			dev->ctrl_std_signal_mode->val;
-		if (dev->std_signal_mode[dev->input] == SELECTED_STD)
-			dev->query_std[dev->input] =
-				vivid_standard[dev->ctrl_standard->val];
-		v4l2_ctrl_activate(dev->ctrl_standard,
-				   dev->std_signal_mode[dev->input] ==
-					SELECTED_STD);
-		vivid_update_quality(dev);
-		vivid_send_source_change(dev, TV);
-		vivid_send_source_change(dev, SVID);
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_sdtv_cap_ctrl_ops = {
-	.s_ctrl = vivid_sdtv_cap_s_ctrl,
-};
-
-static const char * const vivid_ctrl_std_signal_mode_strings[] = {
-	"Current Standard",
-	"No Signal",
-	"No Lock",
-	"",
-	"Selected Standard",
-	"Cycle Through All Standards",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_std_signal_mode = {
-	.ops = &vivid_sdtv_cap_ctrl_ops,
-	.id = VIVID_CID_STD_SIGNAL_MODE,
-	.name = "Standard Signal Mode",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = ARRAY_SIZE(vivid_ctrl_std_signal_mode_strings) - 2,
-	.menu_skip_mask = 1 << 3,
-	.qmenu = vivid_ctrl_std_signal_mode_strings,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_standard = {
-	.ops = &vivid_sdtv_cap_ctrl_ops,
-	.id = VIVID_CID_STANDARD,
-	.name = "Standard",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = 14,
-	.qmenu = vivid_ctrl_standard_strings,
-};
-
-
-
-/* Radio Receiver Controls */
-
-static int vivid_radio_rx_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_radio_rx);
-
-	switch (ctrl->id) {
-	case VIVID_CID_RADIO_SEEK_MODE:
-		dev->radio_rx_hw_seek_mode = ctrl->val;
-		break;
-	case VIVID_CID_RADIO_SEEK_PROG_LIM:
-		dev->radio_rx_hw_seek_prog_lim = ctrl->val;
-		break;
-	case VIVID_CID_RADIO_RX_RDS_RBDS:
-		dev->rds_gen.use_rbds = ctrl->val;
-		break;
-	case VIVID_CID_RADIO_RX_RDS_BLOCKIO:
-		dev->radio_rx_rds_controls = ctrl->val;
-		dev->radio_rx_caps &= ~V4L2_CAP_READWRITE;
-		dev->radio_rx_rds_use_alternates = false;
-		if (!dev->radio_rx_rds_controls) {
-			dev->radio_rx_caps |= V4L2_CAP_READWRITE;
-			__v4l2_ctrl_s_ctrl(dev->radio_rx_rds_pty, 0);
-			__v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ta, 0);
-			__v4l2_ctrl_s_ctrl(dev->radio_rx_rds_tp, 0);
-			__v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ms, 0);
-			__v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_psname, "");
-			__v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_radiotext, "");
-		}
-		v4l2_ctrl_activate(dev->radio_rx_rds_pty, dev->radio_rx_rds_controls);
-		v4l2_ctrl_activate(dev->radio_rx_rds_psname, dev->radio_rx_rds_controls);
-		v4l2_ctrl_activate(dev->radio_rx_rds_radiotext, dev->radio_rx_rds_controls);
-		v4l2_ctrl_activate(dev->radio_rx_rds_ta, dev->radio_rx_rds_controls);
-		v4l2_ctrl_activate(dev->radio_rx_rds_tp, dev->radio_rx_rds_controls);
-		v4l2_ctrl_activate(dev->radio_rx_rds_ms, dev->radio_rx_rds_controls);
-		dev->radio_rx_dev.device_caps = dev->radio_rx_caps;
-		break;
-	case V4L2_CID_RDS_RECEPTION:
-		dev->radio_rx_rds_enabled = ctrl->val;
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_radio_rx_ctrl_ops = {
-	.s_ctrl = vivid_radio_rx_s_ctrl,
-};
-
-static const char * const vivid_ctrl_radio_rds_mode_strings[] = {
-	"Block I/O",
-	"Controls",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_radio_rx_rds_blockio = {
-	.ops = &vivid_radio_rx_ctrl_ops,
-	.id = VIVID_CID_RADIO_RX_RDS_BLOCKIO,
-	.name = "RDS Rx I/O Mode",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.qmenu = vivid_ctrl_radio_rds_mode_strings,
-	.max = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_radio_rx_rds_rbds = {
-	.ops = &vivid_radio_rx_ctrl_ops,
-	.id = VIVID_CID_RADIO_RX_RDS_RBDS,
-	.name = "Generate RBDS Instead of RDS",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-static const char * const vivid_ctrl_radio_hw_seek_mode_strings[] = {
-	"Bounded",
-	"Wrap Around",
-	"Both",
-	NULL,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_radio_hw_seek_mode = {
-	.ops = &vivid_radio_rx_ctrl_ops,
-	.id = VIVID_CID_RADIO_SEEK_MODE,
-	.name = "Radio HW Seek Mode",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.max = 2,
-	.qmenu = vivid_ctrl_radio_hw_seek_mode_strings,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_radio_hw_seek_prog_lim = {
-	.ops = &vivid_radio_rx_ctrl_ops,
-	.id = VIVID_CID_RADIO_SEEK_PROG_LIM,
-	.name = "Radio Programmable HW Seek",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.step = 1,
-};
-
-
-/* Radio Transmitter Controls */
-
-static int vivid_radio_tx_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_radio_tx);
-
-	switch (ctrl->id) {
-	case VIVID_CID_RADIO_TX_RDS_BLOCKIO:
-		dev->radio_tx_rds_controls = ctrl->val;
-		dev->radio_tx_caps &= ~V4L2_CAP_READWRITE;
-		if (!dev->radio_tx_rds_controls)
-			dev->radio_tx_caps |= V4L2_CAP_READWRITE;
-		dev->radio_tx_dev.device_caps = dev->radio_tx_caps;
-		break;
-	case V4L2_CID_RDS_TX_PTY:
-		if (dev->radio_rx_rds_controls)
-			v4l2_ctrl_s_ctrl(dev->radio_rx_rds_pty, ctrl->val);
-		break;
-	case V4L2_CID_RDS_TX_PS_NAME:
-		if (dev->radio_rx_rds_controls)
-			v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_psname, ctrl->p_new.p_char);
-		break;
-	case V4L2_CID_RDS_TX_RADIO_TEXT:
-		if (dev->radio_rx_rds_controls)
-			v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_radiotext, ctrl->p_new.p_char);
-		break;
-	case V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT:
-		if (dev->radio_rx_rds_controls)
-			v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ta, ctrl->val);
-		break;
-	case V4L2_CID_RDS_TX_TRAFFIC_PROGRAM:
-		if (dev->radio_rx_rds_controls)
-			v4l2_ctrl_s_ctrl(dev->radio_rx_rds_tp, ctrl->val);
-		break;
-	case V4L2_CID_RDS_TX_MUSIC_SPEECH:
-		if (dev->radio_rx_rds_controls)
-			v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ms, ctrl->val);
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_radio_tx_ctrl_ops = {
-	.s_ctrl = vivid_radio_tx_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_radio_tx_rds_blockio = {
-	.ops = &vivid_radio_tx_ctrl_ops,
-	.id = VIVID_CID_RADIO_TX_RDS_BLOCKIO,
-	.name = "RDS Tx I/O Mode",
-	.type = V4L2_CTRL_TYPE_MENU,
-	.qmenu = vivid_ctrl_radio_rds_mode_strings,
-	.max = 1,
-	.def = 1,
-};
-
-
-/* SDR Capture Controls */
-
-static int vivid_sdr_cap_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_sdr_cap);
-
-	switch (ctrl->id) {
-	case VIVID_CID_SDR_CAP_FM_DEVIATION:
-		dev->sdr_fm_deviation = ctrl->val;
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_sdr_cap_ctrl_ops = {
-	.s_ctrl = vivid_sdr_cap_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_sdr_cap_fm_deviation = {
-	.ops = &vivid_sdr_cap_ctrl_ops,
-	.id = VIVID_CID_SDR_CAP_FM_DEVIATION,
-	.name = "FM Deviation",
-	.type = V4L2_CTRL_TYPE_INTEGER,
-	.min =    100,
-	.max = 200000,
-	.def =  75000,
-	.step =     1,
-};
-
-/* Metadata Capture Control */
-
-static int vivid_meta_cap_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev,
-					     ctrl_hdl_meta_cap);
-
-	switch (ctrl->id) {
-	case VIVID_CID_META_CAP_GENERATE_PTS:
-		dev->meta_pts = ctrl->val;
-		break;
-	case VIVID_CID_META_CAP_GENERATE_SCR:
-		dev->meta_scr = ctrl->val;
-		break;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops vivid_meta_cap_ctrl_ops = {
-	.s_ctrl = vivid_meta_cap_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_meta_has_pts = {
-	.ops = &vivid_meta_cap_ctrl_ops,
-	.id = VIVID_CID_META_CAP_GENERATE_PTS,
-	.name = "Generate PTS",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.def = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_meta_has_src_clk = {
-	.ops = &vivid_meta_cap_ctrl_ops,
-	.id = VIVID_CID_META_CAP_GENERATE_SCR,
-	.name = "Generate SCR",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.max = 1,
-	.def = 1,
-	.step = 1,
-};
-
-static const struct v4l2_ctrl_config vivid_ctrl_class = {
-	.ops = &vivid_user_gen_ctrl_ops,
-	.flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY,
-	.id = VIVID_CID_VIVID_CLASS,
-	.name = "Vivid Controls",
-	.type = V4L2_CTRL_TYPE_CTRL_CLASS,
-};
-
-int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap,
-		bool show_ccs_out, bool no_error_inj,
-		bool has_sdtv, bool has_hdmi)
-{
-	struct v4l2_ctrl_handler *hdl_user_gen = &dev->ctrl_hdl_user_gen;
-	struct v4l2_ctrl_handler *hdl_user_vid = &dev->ctrl_hdl_user_vid;
-	struct v4l2_ctrl_handler *hdl_user_aud = &dev->ctrl_hdl_user_aud;
-	struct v4l2_ctrl_handler *hdl_streaming = &dev->ctrl_hdl_streaming;
-	struct v4l2_ctrl_handler *hdl_sdtv_cap = &dev->ctrl_hdl_sdtv_cap;
-	struct v4l2_ctrl_handler *hdl_loop_cap = &dev->ctrl_hdl_loop_cap;
-	struct v4l2_ctrl_handler *hdl_fb = &dev->ctrl_hdl_fb;
-	struct v4l2_ctrl_handler *hdl_vid_cap = &dev->ctrl_hdl_vid_cap;
-	struct v4l2_ctrl_handler *hdl_vid_out = &dev->ctrl_hdl_vid_out;
-	struct v4l2_ctrl_handler *hdl_vbi_cap = &dev->ctrl_hdl_vbi_cap;
-	struct v4l2_ctrl_handler *hdl_vbi_out = &dev->ctrl_hdl_vbi_out;
-	struct v4l2_ctrl_handler *hdl_radio_rx = &dev->ctrl_hdl_radio_rx;
-	struct v4l2_ctrl_handler *hdl_radio_tx = &dev->ctrl_hdl_radio_tx;
-	struct v4l2_ctrl_handler *hdl_sdr_cap = &dev->ctrl_hdl_sdr_cap;
-	struct v4l2_ctrl_handler *hdl_meta_cap = &dev->ctrl_hdl_meta_cap;
-	struct v4l2_ctrl_handler *hdl_meta_out = &dev->ctrl_hdl_meta_out;
-	struct v4l2_ctrl_handler *hdl_tch_cap = &dev->ctrl_hdl_touch_cap;
-
-	struct v4l2_ctrl_config vivid_ctrl_dv_timings = {
-		.ops = &vivid_vid_cap_ctrl_ops,
-		.id = VIVID_CID_DV_TIMINGS,
-		.name = "DV Timings",
-		.type = V4L2_CTRL_TYPE_MENU,
-	};
-	int i;
-
-	v4l2_ctrl_handler_init(hdl_user_gen, 10);
-	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_user_vid, 9);
-	v4l2_ctrl_new_custom(hdl_user_vid, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_user_aud, 2);
-	v4l2_ctrl_new_custom(hdl_user_aud, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_streaming, 8);
-	v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_sdtv_cap, 2);
-	v4l2_ctrl_new_custom(hdl_sdtv_cap, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_loop_cap, 1);
-	v4l2_ctrl_new_custom(hdl_loop_cap, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_fb, 1);
-	v4l2_ctrl_new_custom(hdl_fb, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_vid_cap, 55);
-	v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_vid_out, 26);
-	if (!no_error_inj || dev->has_fb || dev->num_hdmi_outputs)
-		v4l2_ctrl_new_custom(hdl_vid_out, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_vbi_cap, 21);
-	v4l2_ctrl_new_custom(hdl_vbi_cap, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_vbi_out, 19);
-	if (!no_error_inj)
-		v4l2_ctrl_new_custom(hdl_vbi_out, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_radio_rx, 17);
-	v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_radio_tx, 17);
-	v4l2_ctrl_new_custom(hdl_radio_tx, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_sdr_cap, 19);
-	v4l2_ctrl_new_custom(hdl_sdr_cap, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_meta_cap, 2);
-	v4l2_ctrl_new_custom(hdl_meta_cap, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_meta_out, 2);
-	v4l2_ctrl_new_custom(hdl_meta_out, &vivid_ctrl_class, NULL);
-	v4l2_ctrl_handler_init(hdl_tch_cap, 2);
-	v4l2_ctrl_new_custom(hdl_tch_cap, &vivid_ctrl_class, NULL);
-
-	/* User Controls */
-	dev->volume = v4l2_ctrl_new_std(hdl_user_aud, NULL,
-		V4L2_CID_AUDIO_VOLUME, 0, 255, 1, 200);
-	dev->mute = v4l2_ctrl_new_std(hdl_user_aud, NULL,
-		V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
-	if (dev->has_vid_cap) {
-		dev->brightness = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-		for (i = 0; i < MAX_INPUTS; i++)
-			dev->input_brightness[i] = 128;
-		dev->contrast = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
-			V4L2_CID_CONTRAST, 0, 255, 1, 128);
-		dev->saturation = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
-			V4L2_CID_SATURATION, 0, 255, 1, 128);
-		dev->hue = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
-			V4L2_CID_HUE, -128, 128, 1, 0);
-		v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
-			V4L2_CID_HFLIP, 0, 1, 1, 0);
-		v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
-			V4L2_CID_VFLIP, 0, 1, 1, 0);
-		dev->autogain = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
-			V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
-		dev->gain = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
-			V4L2_CID_GAIN, 0, 255, 1, 100);
-		dev->alpha = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
-			V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 0);
-	}
-	dev->button = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_button, NULL);
-	dev->int32 = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_int32, NULL);
-	dev->int64 = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_int64, NULL);
-	dev->boolean = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_boolean, NULL);
-	dev->menu = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_menu, NULL);
-	dev->string = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_string, NULL);
-	dev->bitmask = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_bitmask, NULL);
-	dev->int_menu = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_int_menu, NULL);
-	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_area, NULL);
-	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u32_array, NULL);
-	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u16_matrix, NULL);
-	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u8_4d_array, NULL);
-
-	if (dev->has_vid_cap) {
-		/* Image Processing Controls */
-		struct v4l2_ctrl_config vivid_ctrl_test_pattern = {
-			.ops = &vivid_vid_cap_ctrl_ops,
-			.id = VIVID_CID_TEST_PATTERN,
-			.name = "Test Pattern",
-			.type = V4L2_CTRL_TYPE_MENU,
-			.max = TPG_PAT_NOISE,
-			.qmenu = tpg_pattern_strings,
-		};
-
-		dev->test_pattern = v4l2_ctrl_new_custom(hdl_vid_cap,
-				&vivid_ctrl_test_pattern, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_perc_fill, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_hor_movement, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_vert_movement, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_osd_mode, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_show_border, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_show_square, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_hflip, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_vflip, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_insert_sav, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_insert_eav, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_reduced_fps, NULL);
-		if (show_ccs_cap) {
-			dev->ctrl_has_crop_cap = v4l2_ctrl_new_custom(hdl_vid_cap,
-				&vivid_ctrl_has_crop_cap, NULL);
-			dev->ctrl_has_compose_cap = v4l2_ctrl_new_custom(hdl_vid_cap,
-				&vivid_ctrl_has_compose_cap, NULL);
-			dev->ctrl_has_scaler_cap = v4l2_ctrl_new_custom(hdl_vid_cap,
-				&vivid_ctrl_has_scaler_cap, NULL);
-		}
-
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_tstamp_src, NULL);
-		dev->colorspace = v4l2_ctrl_new_custom(hdl_vid_cap,
-			&vivid_ctrl_colorspace, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_xfer_func, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_ycbcr_enc, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_hsv_enc, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_quantization, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_alpha_mode, NULL);
-	}
-
-	if (dev->has_vid_out && show_ccs_out) {
-		dev->ctrl_has_crop_out = v4l2_ctrl_new_custom(hdl_vid_out,
-			&vivid_ctrl_has_crop_out, NULL);
-		dev->ctrl_has_compose_out = v4l2_ctrl_new_custom(hdl_vid_out,
-			&vivid_ctrl_has_compose_out, NULL);
-		dev->ctrl_has_scaler_out = v4l2_ctrl_new_custom(hdl_vid_out,
-			&vivid_ctrl_has_scaler_out, NULL);
-	}
-
-	/*
-	 * Testing this driver with v4l2-compliance will trigger the error
-	 * injection controls, and after that nothing will work as expected.
-	 * So we have a module option to drop these error injecting controls
-	 * allowing us to run v4l2_compliance again.
-	 */
-	if (!no_error_inj) {
-		v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_disconnect, NULL);
-		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_dqbuf_error, NULL);
-		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_perc_dropped, NULL);
-		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_queue_setup_error, NULL);
-		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_buf_prepare_error, NULL);
-		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_start_streaming_error, NULL);
-		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_queue_error, NULL);
-#ifdef CONFIG_MEDIA_CONTROLLER
-		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_req_validate_error, NULL);
-#endif
-		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_seq_wrap, NULL);
-		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_time_wrap, NULL);
-	}
-
-	if (has_sdtv && (dev->has_vid_cap || dev->has_vbi_cap)) {
-		if (dev->has_vid_cap)
-			v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_std_aspect_ratio, NULL);
-		dev->ctrl_std_signal_mode = v4l2_ctrl_new_custom(hdl_sdtv_cap,
-			&vivid_ctrl_std_signal_mode, NULL);
-		dev->ctrl_standard = v4l2_ctrl_new_custom(hdl_sdtv_cap,
-			&vivid_ctrl_standard, NULL);
-		if (dev->ctrl_std_signal_mode)
-			v4l2_ctrl_cluster(2, &dev->ctrl_std_signal_mode);
-		if (dev->has_raw_vbi_cap)
-			v4l2_ctrl_new_custom(hdl_vbi_cap, &vivid_ctrl_vbi_cap_interlaced, NULL);
-	}
-
-	if (dev->num_hdmi_inputs) {
-		s64 hdmi_input_mask = GENMASK(dev->num_hdmi_inputs - 1, 0);
-
-		dev->ctrl_dv_timings_signal_mode = v4l2_ctrl_new_custom(hdl_vid_cap,
-					&vivid_ctrl_dv_timings_signal_mode, NULL);
-
-		vivid_ctrl_dv_timings.max = dev->query_dv_timings_size - 1;
-		vivid_ctrl_dv_timings.qmenu =
-			(const char * const *)dev->query_dv_timings_qmenu;
-		dev->ctrl_dv_timings = v4l2_ctrl_new_custom(hdl_vid_cap,
-			&vivid_ctrl_dv_timings, NULL);
-		if (dev->ctrl_dv_timings_signal_mode)
-			v4l2_ctrl_cluster(2, &dev->ctrl_dv_timings_signal_mode);
-
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_dv_timings_aspect_ratio, NULL);
-		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_max_edid_blocks, NULL);
-		dev->real_rgb_range_cap = v4l2_ctrl_new_custom(hdl_vid_cap,
-			&vivid_ctrl_limited_rgb_range, NULL);
-		dev->rgb_range_cap = v4l2_ctrl_new_std_menu(hdl_vid_cap,
-			&vivid_vid_cap_ctrl_ops,
-			V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
-			0, V4L2_DV_RGB_RANGE_AUTO);
-		dev->ctrl_rx_power_present = v4l2_ctrl_new_std(hdl_vid_cap,
-			NULL, V4L2_CID_DV_RX_POWER_PRESENT, 0, hdmi_input_mask,
-			0, hdmi_input_mask);
-
-	}
-	if (dev->num_hdmi_outputs) {
-		s64 hdmi_output_mask = GENMASK(dev->num_hdmi_outputs - 1, 0);
-
-		/*
-		 * We aren't doing anything with this at the moment, but
-		 * HDMI outputs typically have this controls.
-		 */
-		dev->ctrl_tx_rgb_range = v4l2_ctrl_new_std_menu(hdl_vid_out, NULL,
-			V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
-			0, V4L2_DV_RGB_RANGE_AUTO);
-		dev->ctrl_tx_mode = v4l2_ctrl_new_std_menu(hdl_vid_out, NULL,
-			V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI,
-			0, V4L2_DV_TX_MODE_HDMI);
-		dev->ctrl_display_present = v4l2_ctrl_new_custom(hdl_vid_out,
-			&vivid_ctrl_display_present, NULL);
-		dev->ctrl_tx_hotplug = v4l2_ctrl_new_std(hdl_vid_out,
-			NULL, V4L2_CID_DV_TX_HOTPLUG, 0, hdmi_output_mask,
-			0, hdmi_output_mask);
-		dev->ctrl_tx_rxsense = v4l2_ctrl_new_std(hdl_vid_out,
-			NULL, V4L2_CID_DV_TX_RXSENSE, 0, hdmi_output_mask,
-			0, hdmi_output_mask);
-		dev->ctrl_tx_edid_present = v4l2_ctrl_new_std(hdl_vid_out,
-			NULL, V4L2_CID_DV_TX_EDID_PRESENT, 0, hdmi_output_mask,
-			0, hdmi_output_mask);
-	}
-	if ((dev->has_vid_cap && dev->has_vid_out) ||
-	    (dev->has_vbi_cap && dev->has_vbi_out))
-		v4l2_ctrl_new_custom(hdl_loop_cap, &vivid_ctrl_loop_video, NULL);
-
-	if (dev->has_fb)
-		v4l2_ctrl_new_custom(hdl_fb, &vivid_ctrl_clear_fb, NULL);
-
-	if (dev->has_radio_rx) {
-		v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_radio_hw_seek_mode, NULL);
-		v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_radio_hw_seek_prog_lim, NULL);
-		v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_radio_rx_rds_blockio, NULL);
-		v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_radio_rx_rds_rbds, NULL);
-		v4l2_ctrl_new_std(hdl_radio_rx, &vivid_radio_rx_ctrl_ops,
-			V4L2_CID_RDS_RECEPTION, 0, 1, 1, 1);
-		dev->radio_rx_rds_pty = v4l2_ctrl_new_std(hdl_radio_rx,
-			&vivid_radio_rx_ctrl_ops,
-			V4L2_CID_RDS_RX_PTY, 0, 31, 1, 0);
-		dev->radio_rx_rds_psname = v4l2_ctrl_new_std(hdl_radio_rx,
-			&vivid_radio_rx_ctrl_ops,
-			V4L2_CID_RDS_RX_PS_NAME, 0, 8, 8, 0);
-		dev->radio_rx_rds_radiotext = v4l2_ctrl_new_std(hdl_radio_rx,
-			&vivid_radio_rx_ctrl_ops,
-			V4L2_CID_RDS_RX_RADIO_TEXT, 0, 64, 64, 0);
-		dev->radio_rx_rds_ta = v4l2_ctrl_new_std(hdl_radio_rx,
-			&vivid_radio_rx_ctrl_ops,
-			V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0);
-		dev->radio_rx_rds_tp = v4l2_ctrl_new_std(hdl_radio_rx,
-			&vivid_radio_rx_ctrl_ops,
-			V4L2_CID_RDS_RX_TRAFFIC_PROGRAM, 0, 1, 1, 0);
-		dev->radio_rx_rds_ms = v4l2_ctrl_new_std(hdl_radio_rx,
-			&vivid_radio_rx_ctrl_ops,
-			V4L2_CID_RDS_RX_MUSIC_SPEECH, 0, 1, 1, 1);
-	}
-	if (dev->has_radio_tx) {
-		v4l2_ctrl_new_custom(hdl_radio_tx,
-			&vivid_ctrl_radio_tx_rds_blockio, NULL);
-		dev->radio_tx_rds_pi = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_PI, 0, 0xffff, 1, 0x8088);
-		dev->radio_tx_rds_pty = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_PTY, 0, 31, 1, 3);
-		dev->radio_tx_rds_psname = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_PS_NAME, 0, 8, 8, 0);
-		if (dev->radio_tx_rds_psname)
-			v4l2_ctrl_s_ctrl_string(dev->radio_tx_rds_psname, "VIVID-TX");
-		dev->radio_tx_rds_radiotext = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_RADIO_TEXT, 0, 64 * 2, 64, 0);
-		if (dev->radio_tx_rds_radiotext)
-			v4l2_ctrl_s_ctrl_string(dev->radio_tx_rds_radiotext,
-			       "This is a VIVID default Radio Text template text, change at will");
-		dev->radio_tx_rds_mono_stereo = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_MONO_STEREO, 0, 1, 1, 1);
-		dev->radio_tx_rds_art_head = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_ARTIFICIAL_HEAD, 0, 1, 1, 0);
-		dev->radio_tx_rds_compressed = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_COMPRESSED, 0, 1, 1, 0);
-		dev->radio_tx_rds_dyn_pty = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_DYNAMIC_PTY, 0, 1, 1, 0);
-		dev->radio_tx_rds_ta = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0);
-		dev->radio_tx_rds_tp = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_TRAFFIC_PROGRAM, 0, 1, 1, 1);
-		dev->radio_tx_rds_ms = v4l2_ctrl_new_std(hdl_radio_tx,
-			&vivid_radio_tx_ctrl_ops,
-			V4L2_CID_RDS_TX_MUSIC_SPEECH, 0, 1, 1, 1);
-	}
-	if (dev->has_sdr_cap) {
-		v4l2_ctrl_new_custom(hdl_sdr_cap,
-			&vivid_ctrl_sdr_cap_fm_deviation, NULL);
-	}
-	if (dev->has_meta_cap) {
-		v4l2_ctrl_new_custom(hdl_meta_cap,
-				     &vivid_ctrl_meta_has_pts, NULL);
-		v4l2_ctrl_new_custom(hdl_meta_cap,
-				     &vivid_ctrl_meta_has_src_clk, NULL);
-	}
-
-	if (hdl_user_gen->error)
-		return hdl_user_gen->error;
-	if (hdl_user_vid->error)
-		return hdl_user_vid->error;
-	if (hdl_user_aud->error)
-		return hdl_user_aud->error;
-	if (hdl_streaming->error)
-		return hdl_streaming->error;
-	if (hdl_sdr_cap->error)
-		return hdl_sdr_cap->error;
-	if (hdl_loop_cap->error)
-		return hdl_loop_cap->error;
-
-	if (dev->autogain)
-		v4l2_ctrl_auto_cluster(2, &dev->autogain, 0, true);
-
-	if (dev->has_vid_cap) {
-		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_user_vid, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_user_aud, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_streaming, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_sdtv_cap, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_loop_cap, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_fb, NULL, false);
-		if (hdl_vid_cap->error)
-			return hdl_vid_cap->error;
-		dev->vid_cap_dev.ctrl_handler = hdl_vid_cap;
-	}
-	if (dev->has_vid_out) {
-		v4l2_ctrl_add_handler(hdl_vid_out, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vid_out, hdl_user_aud, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vid_out, hdl_streaming, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vid_out, hdl_fb, NULL, false);
-		if (hdl_vid_out->error)
-			return hdl_vid_out->error;
-		dev->vid_out_dev.ctrl_handler = hdl_vid_out;
-	}
-	if (dev->has_vbi_cap) {
-		v4l2_ctrl_add_handler(hdl_vbi_cap, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vbi_cap, hdl_streaming, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vbi_cap, hdl_sdtv_cap, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vbi_cap, hdl_loop_cap, NULL, false);
-		if (hdl_vbi_cap->error)
-			return hdl_vbi_cap->error;
-		dev->vbi_cap_dev.ctrl_handler = hdl_vbi_cap;
-	}
-	if (dev->has_vbi_out) {
-		v4l2_ctrl_add_handler(hdl_vbi_out, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_vbi_out, hdl_streaming, NULL, false);
-		if (hdl_vbi_out->error)
-			return hdl_vbi_out->error;
-		dev->vbi_out_dev.ctrl_handler = hdl_vbi_out;
-	}
-	if (dev->has_radio_rx) {
-		v4l2_ctrl_add_handler(hdl_radio_rx, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_radio_rx, hdl_user_aud, NULL, false);
-		if (hdl_radio_rx->error)
-			return hdl_radio_rx->error;
-		dev->radio_rx_dev.ctrl_handler = hdl_radio_rx;
-	}
-	if (dev->has_radio_tx) {
-		v4l2_ctrl_add_handler(hdl_radio_tx, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_radio_tx, hdl_user_aud, NULL, false);
-		if (hdl_radio_tx->error)
-			return hdl_radio_tx->error;
-		dev->radio_tx_dev.ctrl_handler = hdl_radio_tx;
-	}
-	if (dev->has_sdr_cap) {
-		v4l2_ctrl_add_handler(hdl_sdr_cap, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_sdr_cap, hdl_streaming, NULL, false);
-		if (hdl_sdr_cap->error)
-			return hdl_sdr_cap->error;
-		dev->sdr_cap_dev.ctrl_handler = hdl_sdr_cap;
-	}
-	if (dev->has_meta_cap) {
-		v4l2_ctrl_add_handler(hdl_meta_cap, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_meta_cap, hdl_streaming, NULL, false);
-		if (hdl_meta_cap->error)
-			return hdl_meta_cap->error;
-		dev->meta_cap_dev.ctrl_handler = hdl_meta_cap;
-	}
-	if (dev->has_meta_out) {
-		v4l2_ctrl_add_handler(hdl_meta_out, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_meta_out, hdl_streaming, NULL, false);
-		if (hdl_meta_out->error)
-			return hdl_meta_out->error;
-		dev->meta_out_dev.ctrl_handler = hdl_meta_out;
-	}
-	if (dev->has_touch_cap) {
-		v4l2_ctrl_add_handler(hdl_tch_cap, hdl_user_gen, NULL, false);
-		v4l2_ctrl_add_handler(hdl_tch_cap, hdl_streaming, NULL, false);
-		if (hdl_tch_cap->error)
-			return hdl_tch_cap->error;
-		dev->touch_cap_dev.ctrl_handler = hdl_tch_cap;
-	}
-	return 0;
-}
-
-void vivid_free_controls(struct vivid_dev *dev)
-{
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_vid_cap);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_vid_out);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_vbi_cap);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_vbi_out);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_radio_rx);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_radio_tx);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_sdr_cap);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_user_gen);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_user_vid);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_user_aud);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_streaming);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_sdtv_cap);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_loop_cap);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_fb);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_meta_cap);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_meta_out);
-	v4l2_ctrl_handler_free(&dev->ctrl_hdl_touch_cap);
-}
diff --git a/drivers/media/platform/vivid/vivid-ctrls.h b/drivers/media/platform/vivid/vivid-ctrls.h
deleted file mode 100644
index 6fad5f5d0054..000000000000
--- a/drivers/media/platform/vivid/vivid-ctrls.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-ctrls.h - control support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_CTRLS_H_
-#define _VIVID_CTRLS_H_
-
-enum vivid_hw_seek_modes {
-	VIVID_HW_SEEK_BOUNDED,
-	VIVID_HW_SEEK_WRAP,
-	VIVID_HW_SEEK_BOTH,
-};
-
-int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap,
-		bool show_ccs_out, bool no_error_inj,
-		bool has_sdtv, bool has_hdmi);
-void vivid_free_controls(struct vivid_dev *dev);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-kthread-cap.c b/drivers/media/platform/vivid/vivid-kthread-cap.c
deleted file mode 100644
index 01a9d671b947..000000000000
--- a/drivers/media/platform/vivid/vivid-kthread-cap.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-kthread-cap.h - video/vbi capture thread support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/font.h>
-#include <linux/mutex.h>
-#include <linux/videodev2.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/random.h>
-#include <linux/v4l2-dv-timings.h>
-#include <asm/div64.h>
-#include <media/videobuf2-vmalloc.h>
-#include <media/v4l2-dv-timings.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-fh.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-rect.h>
-
-#include "vivid-core.h"
-#include "vivid-vid-common.h"
-#include "vivid-vid-cap.h"
-#include "vivid-vid-out.h"
-#include "vivid-radio-common.h"
-#include "vivid-radio-rx.h"
-#include "vivid-radio-tx.h"
-#include "vivid-sdr-cap.h"
-#include "vivid-vbi-cap.h"
-#include "vivid-vbi-out.h"
-#include "vivid-osd.h"
-#include "vivid-ctrls.h"
-#include "vivid-kthread-cap.h"
-#include "vivid-meta-cap.h"
-
-static inline v4l2_std_id vivid_get_std_cap(const struct vivid_dev *dev)
-{
-	if (vivid_is_sdtv_cap(dev))
-		return dev->std_cap[dev->input];
-	return 0;
-}
-
-static void copy_pix(struct vivid_dev *dev, int win_y, int win_x,
-			u16 *cap, const u16 *osd)
-{
-	u16 out;
-	int left = dev->overlay_out_left;
-	int top = dev->overlay_out_top;
-	int fb_x = win_x + left;
-	int fb_y = win_y + top;
-	int i;
-
-	out = *cap;
-	*cap = *osd;
-	if (dev->bitmap_out) {
-		const u8 *p = dev->bitmap_out;
-		unsigned stride = (dev->compose_out.width + 7) / 8;
-
-		win_x -= dev->compose_out.left;
-		win_y -= dev->compose_out.top;
-		if (!(p[stride * win_y + win_x / 8] & (1 << (win_x & 7))))
-			return;
-	}
-
-	for (i = 0; i < dev->clipcount_out; i++) {
-		struct v4l2_rect *r = &dev->clips_out[i].c;
-
-		if (fb_y >= r->top && fb_y < r->top + r->height &&
-		    fb_x >= r->left && fb_x < r->left + r->width)
-			return;
-	}
-	if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_CHROMAKEY) &&
-	    *osd != dev->chromakey_out)
-		return;
-	if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_SRC_CHROMAKEY) &&
-	    out == dev->chromakey_out)
-		return;
-	if (dev->fmt_cap->alpha_mask) {
-		if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_GLOBAL_ALPHA) &&
-		    dev->global_alpha_out)
-			return;
-		if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_LOCAL_ALPHA) &&
-		    *cap & dev->fmt_cap->alpha_mask)
-			return;
-		if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_LOCAL_INV_ALPHA) &&
-		    !(*cap & dev->fmt_cap->alpha_mask))
-			return;
-	}
-	*cap = out;
-}
-
-static void blend_line(struct vivid_dev *dev, unsigned y_offset, unsigned x_offset,
-		u8 *vcapbuf, const u8 *vosdbuf,
-		unsigned width, unsigned pixsize)
-{
-	unsigned x;
-
-	for (x = 0; x < width; x++, vcapbuf += pixsize, vosdbuf += pixsize) {
-		copy_pix(dev, y_offset, x_offset + x,
-			 (u16 *)vcapbuf, (const u16 *)vosdbuf);
-	}
-}
-
-static void scale_line(const u8 *src, u8 *dst, unsigned srcw, unsigned dstw, unsigned twopixsize)
-{
-	/* Coarse scaling with Bresenham */
-	unsigned int_part;
-	unsigned fract_part;
-	unsigned src_x = 0;
-	unsigned error = 0;
-	unsigned x;
-
-	/*
-	 * We always combine two pixels to prevent color bleed in the packed
-	 * yuv case.
-	 */
-	srcw /= 2;
-	dstw /= 2;
-	int_part = srcw / dstw;
-	fract_part = srcw % dstw;
-	for (x = 0; x < dstw; x++, dst += twopixsize) {
-		memcpy(dst, src + src_x * twopixsize, twopixsize);
-		src_x += int_part;
-		error += fract_part;
-		if (error >= dstw) {
-			error -= dstw;
-			src_x++;
-		}
-	}
-}
-
-/*
- * Precalculate the rectangles needed to perform video looping:
- *
- * The nominal pipeline is that the video output buffer is cropped by
- * crop_out, scaled to compose_out, overlaid with the output overlay,
- * cropped on the capture side by crop_cap and scaled again to the video
- * capture buffer using compose_cap.
- *
- * To keep things efficient we calculate the intersection of compose_out
- * and crop_cap (since that's the only part of the video that will
- * actually end up in the capture buffer), determine which part of the
- * video output buffer that is and which part of the video capture buffer
- * so we can scale the video straight from the output buffer to the capture
- * buffer without any intermediate steps.
- *
- * If we need to deal with an output overlay, then there is no choice and
- * that intermediate step still has to be taken. For the output overlay
- * support we calculate the intersection of the framebuffer and the overlay
- * window (which may be partially or wholly outside of the framebuffer
- * itself) and the intersection of that with loop_vid_copy (i.e. the part of
- * the actual looped video that will be overlaid). The result is calculated
- * both in framebuffer coordinates (loop_fb_copy) and compose_out coordinates
- * (loop_vid_overlay). Finally calculate the part of the capture buffer that
- * will receive that overlaid video.
- */
-static void vivid_precalc_copy_rects(struct vivid_dev *dev)
-{
-	/* Framebuffer rectangle */
-	struct v4l2_rect r_fb = {
-		0, 0, dev->display_width, dev->display_height
-	};
-	/* Overlay window rectangle in framebuffer coordinates */
-	struct v4l2_rect r_overlay = {
-		dev->overlay_out_left, dev->overlay_out_top,
-		dev->compose_out.width, dev->compose_out.height
-	};
-
-	v4l2_rect_intersect(&dev->loop_vid_copy, &dev->crop_cap, &dev->compose_out);
-
-	dev->loop_vid_out = dev->loop_vid_copy;
-	v4l2_rect_scale(&dev->loop_vid_out, &dev->compose_out, &dev->crop_out);
-	dev->loop_vid_out.left += dev->crop_out.left;
-	dev->loop_vid_out.top += dev->crop_out.top;
-
-	dev->loop_vid_cap = dev->loop_vid_copy;
-	v4l2_rect_scale(&dev->loop_vid_cap, &dev->crop_cap, &dev->compose_cap);
-
-	dprintk(dev, 1,
-		"loop_vid_copy: %dx%d@%dx%d loop_vid_out: %dx%d@%dx%d loop_vid_cap: %dx%d@%dx%d\n",
-		dev->loop_vid_copy.width, dev->loop_vid_copy.height,
-		dev->loop_vid_copy.left, dev->loop_vid_copy.top,
-		dev->loop_vid_out.width, dev->loop_vid_out.height,
-		dev->loop_vid_out.left, dev->loop_vid_out.top,
-		dev->loop_vid_cap.width, dev->loop_vid_cap.height,
-		dev->loop_vid_cap.left, dev->loop_vid_cap.top);
-
-	v4l2_rect_intersect(&r_overlay, &r_fb, &r_overlay);
-
-	/* shift r_overlay to the same origin as compose_out */
-	r_overlay.left += dev->compose_out.left - dev->overlay_out_left;
-	r_overlay.top += dev->compose_out.top - dev->overlay_out_top;
-
-	v4l2_rect_intersect(&dev->loop_vid_overlay, &r_overlay, &dev->loop_vid_copy);
-	dev->loop_fb_copy = dev->loop_vid_overlay;
-
-	/* shift dev->loop_fb_copy back again to the fb origin */
-	dev->loop_fb_copy.left -= dev->compose_out.left - dev->overlay_out_left;
-	dev->loop_fb_copy.top -= dev->compose_out.top - dev->overlay_out_top;
-
-	dev->loop_vid_overlay_cap = dev->loop_vid_overlay;
-	v4l2_rect_scale(&dev->loop_vid_overlay_cap, &dev->crop_cap, &dev->compose_cap);
-
-	dprintk(dev, 1,
-		"loop_fb_copy: %dx%d@%dx%d loop_vid_overlay: %dx%d@%dx%d loop_vid_overlay_cap: %dx%d@%dx%d\n",
-		dev->loop_fb_copy.width, dev->loop_fb_copy.height,
-		dev->loop_fb_copy.left, dev->loop_fb_copy.top,
-		dev->loop_vid_overlay.width, dev->loop_vid_overlay.height,
-		dev->loop_vid_overlay.left, dev->loop_vid_overlay.top,
-		dev->loop_vid_overlay_cap.width, dev->loop_vid_overlay_cap.height,
-		dev->loop_vid_overlay_cap.left, dev->loop_vid_overlay_cap.top);
-}
-
-static void *plane_vaddr(struct tpg_data *tpg, struct vivid_buffer *buf,
-			 unsigned p, unsigned bpl[TPG_MAX_PLANES], unsigned h)
-{
-	unsigned i;
-	void *vbuf;
-
-	if (p == 0 || tpg_g_buffers(tpg) > 1)
-		return vb2_plane_vaddr(&buf->vb.vb2_buf, p);
-	vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
-	for (i = 0; i < p; i++)
-		vbuf += bpl[i] * h / tpg->vdownsampling[i];
-	return vbuf;
-}
-
-static noinline_for_stack int vivid_copy_buffer(struct vivid_dev *dev, unsigned p,
-		u8 *vcapbuf, struct vivid_buffer *vid_cap_buf)
-{
-	bool blank = dev->must_blank[vid_cap_buf->vb.vb2_buf.index];
-	struct tpg_data *tpg = &dev->tpg;
-	struct vivid_buffer *vid_out_buf = NULL;
-	unsigned vdiv = dev->fmt_out->vdownsampling[p];
-	unsigned twopixsize = tpg_g_twopixelsize(tpg, p);
-	unsigned img_width = tpg_hdiv(tpg, p, dev->compose_cap.width);
-	unsigned img_height = dev->compose_cap.height;
-	unsigned stride_cap = tpg->bytesperline[p];
-	unsigned stride_out = dev->bytesperline_out[p];
-	unsigned stride_osd = dev->display_byte_stride;
-	unsigned hmax = (img_height * tpg->perc_fill) / 100;
-	u8 *voutbuf;
-	u8 *vosdbuf = NULL;
-	unsigned y;
-	bool blend = dev->bitmap_out || dev->clipcount_out || dev->fbuf_out_flags;
-	/* Coarse scaling with Bresenham */
-	unsigned vid_out_int_part;
-	unsigned vid_out_fract_part;
-	unsigned vid_out_y = 0;
-	unsigned vid_out_error = 0;
-	unsigned vid_overlay_int_part = 0;
-	unsigned vid_overlay_fract_part = 0;
-	unsigned vid_overlay_y = 0;
-	unsigned vid_overlay_error = 0;
-	unsigned vid_cap_left = tpg_hdiv(tpg, p, dev->loop_vid_cap.left);
-	unsigned vid_cap_right;
-	bool quick;
-
-	vid_out_int_part = dev->loop_vid_out.height / dev->loop_vid_cap.height;
-	vid_out_fract_part = dev->loop_vid_out.height % dev->loop_vid_cap.height;
-
-	if (!list_empty(&dev->vid_out_active))
-		vid_out_buf = list_entry(dev->vid_out_active.next,
-					 struct vivid_buffer, list);
-	if (vid_out_buf == NULL)
-		return -ENODATA;
-
-	vid_cap_buf->vb.field = vid_out_buf->vb.field;
-
-	voutbuf = plane_vaddr(tpg, vid_out_buf, p,
-			      dev->bytesperline_out, dev->fmt_out_rect.height);
-	if (p < dev->fmt_out->buffers)
-		voutbuf += vid_out_buf->vb.vb2_buf.planes[p].data_offset;
-	voutbuf += tpg_hdiv(tpg, p, dev->loop_vid_out.left) +
-		(dev->loop_vid_out.top / vdiv) * stride_out;
-	vcapbuf += tpg_hdiv(tpg, p, dev->compose_cap.left) +
-		(dev->compose_cap.top / vdiv) * stride_cap;
-
-	if (dev->loop_vid_copy.width == 0 || dev->loop_vid_copy.height == 0) {
-		/*
-		 * If there is nothing to copy, then just fill the capture window
-		 * with black.
-		 */
-		for (y = 0; y < hmax / vdiv; y++, vcapbuf += stride_cap)
-			memcpy(vcapbuf, tpg->black_line[p], img_width);
-		return 0;
-	}
-
-	if (dev->overlay_out_enabled &&
-	    dev->loop_vid_overlay.width && dev->loop_vid_overlay.height) {
-		vosdbuf = dev->video_vbase;
-		vosdbuf += (dev->loop_fb_copy.left * twopixsize) / 2 +
-			   dev->loop_fb_copy.top * stride_osd;
-		vid_overlay_int_part = dev->loop_vid_overlay.height /
-				       dev->loop_vid_overlay_cap.height;
-		vid_overlay_fract_part = dev->loop_vid_overlay.height %
-					 dev->loop_vid_overlay_cap.height;
-	}
-
-	vid_cap_right = tpg_hdiv(tpg, p, dev->loop_vid_cap.left + dev->loop_vid_cap.width);
-	/* quick is true if no video scaling is needed */
-	quick = dev->loop_vid_out.width == dev->loop_vid_cap.width;
-
-	dev->cur_scaled_line = dev->loop_vid_out.height;
-	for (y = 0; y < hmax; y += vdiv, vcapbuf += stride_cap) {
-		/* osdline is true if this line requires overlay blending */
-		bool osdline = vosdbuf && y >= dev->loop_vid_overlay_cap.top &&
-			  y < dev->loop_vid_overlay_cap.top + dev->loop_vid_overlay_cap.height;
-
-		/*
-		 * If this line of the capture buffer doesn't get any video, then
-		 * just fill with black.
-		 */
-		if (y < dev->loop_vid_cap.top ||
-		    y >= dev->loop_vid_cap.top + dev->loop_vid_cap.height) {
-			memcpy(vcapbuf, tpg->black_line[p], img_width);
-			continue;
-		}
-
-		/* fill the left border with black */
-		if (dev->loop_vid_cap.left)
-			memcpy(vcapbuf, tpg->black_line[p], vid_cap_left);
-
-		/* fill the right border with black */
-		if (vid_cap_right < img_width)
-			memcpy(vcapbuf + vid_cap_right, tpg->black_line[p],
-				img_width - vid_cap_right);
-
-		if (quick && !osdline) {
-			memcpy(vcapbuf + vid_cap_left,
-			       voutbuf + vid_out_y * stride_out,
-			       tpg_hdiv(tpg, p, dev->loop_vid_cap.width));
-			goto update_vid_out_y;
-		}
-		if (dev->cur_scaled_line == vid_out_y) {
-			memcpy(vcapbuf + vid_cap_left, dev->scaled_line,
-			       tpg_hdiv(tpg, p, dev->loop_vid_cap.width));
-			goto update_vid_out_y;
-		}
-		if (!osdline) {
-			scale_line(voutbuf + vid_out_y * stride_out, dev->scaled_line,
-				tpg_hdiv(tpg, p, dev->loop_vid_out.width),
-				tpg_hdiv(tpg, p, dev->loop_vid_cap.width),
-				tpg_g_twopixelsize(tpg, p));
-		} else {
-			/*
-			 * Offset in bytes within loop_vid_copy to the start of the
-			 * loop_vid_overlay rectangle.
-			 */
-			unsigned offset =
-				((dev->loop_vid_overlay.left - dev->loop_vid_copy.left) *
-				 twopixsize) / 2;
-			u8 *osd = vosdbuf + vid_overlay_y * stride_osd;
-
-			scale_line(voutbuf + vid_out_y * stride_out, dev->blended_line,
-				dev->loop_vid_out.width, dev->loop_vid_copy.width,
-				tpg_g_twopixelsize(tpg, p));
-			if (blend)
-				blend_line(dev, vid_overlay_y + dev->loop_vid_overlay.top,
-					   dev->loop_vid_overlay.left,
-					   dev->blended_line + offset, osd,
-					   dev->loop_vid_overlay.width, twopixsize / 2);
-			else
-				memcpy(dev->blended_line + offset,
-				       osd, (dev->loop_vid_overlay.width * twopixsize) / 2);
-			scale_line(dev->blended_line, dev->scaled_line,
-					dev->loop_vid_copy.width, dev->loop_vid_cap.width,
-					tpg_g_twopixelsize(tpg, p));
-		}
-		dev->cur_scaled_line = vid_out_y;
-		memcpy(vcapbuf + vid_cap_left, dev->scaled_line,
-		       tpg_hdiv(tpg, p, dev->loop_vid_cap.width));
-
-update_vid_out_y:
-		if (osdline) {
-			vid_overlay_y += vid_overlay_int_part;
-			vid_overlay_error += vid_overlay_fract_part;
-			if (vid_overlay_error >= dev->loop_vid_overlay_cap.height) {
-				vid_overlay_error -= dev->loop_vid_overlay_cap.height;
-				vid_overlay_y++;
-			}
-		}
-		vid_out_y += vid_out_int_part;
-		vid_out_error += vid_out_fract_part;
-		if (vid_out_error >= dev->loop_vid_cap.height / vdiv) {
-			vid_out_error -= dev->loop_vid_cap.height / vdiv;
-			vid_out_y++;
-		}
-	}
-
-	if (!blank)
-		return 0;
-	for (; y < img_height; y += vdiv, vcapbuf += stride_cap)
-		memcpy(vcapbuf, tpg->contrast_line[p], img_width);
-	return 0;
-}
-
-static void vivid_fillbuff(struct vivid_dev *dev, struct vivid_buffer *buf)
-{
-	struct tpg_data *tpg = &dev->tpg;
-	unsigned factor = V4L2_FIELD_HAS_T_OR_B(dev->field_cap) ? 2 : 1;
-	unsigned line_height = 16 / factor;
-	bool is_tv = vivid_is_sdtv_cap(dev);
-	bool is_60hz = is_tv && (dev->std_cap[dev->input] & V4L2_STD_525_60);
-	unsigned p;
-	int line = 1;
-	u8 *basep[TPG_MAX_PLANES][2];
-	unsigned ms;
-	char str[100];
-	s32 gain;
-	bool is_loop = false;
-
-	if (dev->loop_video && dev->can_loop_video &&
-		((vivid_is_svid_cap(dev) &&
-		!VIVID_INVALID_SIGNAL(dev->std_signal_mode[dev->input])) ||
-		(vivid_is_hdmi_cap(dev) &&
-		!VIVID_INVALID_SIGNAL(dev->dv_timings_signal_mode[dev->input]))))
-		is_loop = true;
-
-	buf->vb.sequence = dev->vid_cap_seq_count;
-	if (dev->field_cap == V4L2_FIELD_ALTERNATE) {
-		/*
-		 * 60 Hz standards start with the bottom field, 50 Hz standards
-		 * with the top field. So if the 0-based seq_count is even,
-		 * then the field is TOP for 50 Hz and BOTTOM for 60 Hz
-		 * standards.
-		 */
-		buf->vb.field = ((dev->vid_cap_seq_count & 1) ^ is_60hz) ?
-			V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP;
-		/*
-		 * The sequence counter counts frames, not fields. So divide
-		 * by two.
-		 */
-		buf->vb.sequence /= 2;
-	} else {
-		buf->vb.field = dev->field_cap;
-	}
-	tpg_s_field(tpg, buf->vb.field,
-		    dev->field_cap == V4L2_FIELD_ALTERNATE);
-	tpg_s_perc_fill_blank(tpg, dev->must_blank[buf->vb.vb2_buf.index]);
-
-	vivid_precalc_copy_rects(dev);
-
-	for (p = 0; p < tpg_g_planes(tpg); p++) {
-		void *vbuf = plane_vaddr(tpg, buf, p,
-					 tpg->bytesperline, tpg->buf_height);
-
-		/*
-		 * The first plane of a multiplanar format has a non-zero
-		 * data_offset. This helps testing whether the application
-		 * correctly supports non-zero data offsets.
-		 */
-		if (p < tpg_g_buffers(tpg) && dev->fmt_cap->data_offset[p]) {
-			memset(vbuf, dev->fmt_cap->data_offset[p] & 0xff,
-			       dev->fmt_cap->data_offset[p]);
-			vbuf += dev->fmt_cap->data_offset[p];
-		}
-		tpg_calc_text_basep(tpg, basep, p, vbuf);
-		if (!is_loop || vivid_copy_buffer(dev, p, vbuf, buf))
-			tpg_fill_plane_buffer(tpg, vivid_get_std_cap(dev),
-					p, vbuf);
-	}
-	dev->must_blank[buf->vb.vb2_buf.index] = false;
-
-	/* Updates stream time, only update at the start of a new frame. */
-	if (dev->field_cap != V4L2_FIELD_ALTERNATE ||
-			(dev->vid_cap_seq_count & 1) == 0)
-		dev->ms_vid_cap =
-			jiffies_to_msecs(jiffies - dev->jiffies_vid_cap);
-
-	ms = dev->ms_vid_cap;
-	if (dev->osd_mode <= 1) {
-		snprintf(str, sizeof(str), " %02d:%02d:%02d:%03d %u%s",
-				(ms / (60 * 60 * 1000)) % 24,
-				(ms / (60 * 1000)) % 60,
-				(ms / 1000) % 60,
-				ms % 1000,
-				buf->vb.sequence,
-				(dev->field_cap == V4L2_FIELD_ALTERNATE) ?
-					(buf->vb.field == V4L2_FIELD_TOP ?
-					 " top" : " bottom") : "");
-		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
-	}
-	if (dev->osd_mode == 0) {
-		snprintf(str, sizeof(str), " %dx%d, input %d ",
-				dev->src_rect.width, dev->src_rect.height, dev->input);
-		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
-
-		gain = v4l2_ctrl_g_ctrl(dev->gain);
-		mutex_lock(dev->ctrl_hdl_user_vid.lock);
-		snprintf(str, sizeof(str),
-			" brightness %3d, contrast %3d, saturation %3d, hue %d ",
-			dev->brightness->cur.val,
-			dev->contrast->cur.val,
-			dev->saturation->cur.val,
-			dev->hue->cur.val);
-		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
-		snprintf(str, sizeof(str),
-			" autogain %d, gain %3d, alpha 0x%02x ",
-			dev->autogain->cur.val, gain, dev->alpha->cur.val);
-		mutex_unlock(dev->ctrl_hdl_user_vid.lock);
-		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
-		mutex_lock(dev->ctrl_hdl_user_aud.lock);
-		snprintf(str, sizeof(str),
-			" volume %3d, mute %d ",
-			dev->volume->cur.val, dev->mute->cur.val);
-		mutex_unlock(dev->ctrl_hdl_user_aud.lock);
-		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
-		mutex_lock(dev->ctrl_hdl_user_gen.lock);
-		snprintf(str, sizeof(str), " int32 %d, int64 %lld, bitmask %08x ",
-			dev->int32->cur.val,
-			*dev->int64->p_cur.p_s64,
-			dev->bitmask->cur.val);
-		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
-		snprintf(str, sizeof(str), " boolean %d, menu %s, string \"%s\" ",
-			dev->boolean->cur.val,
-			dev->menu->qmenu[dev->menu->cur.val],
-			dev->string->p_cur.p_char);
-		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
-		snprintf(str, sizeof(str), " integer_menu %lld, value %d ",
-			dev->int_menu->qmenu_int[dev->int_menu->cur.val],
-			dev->int_menu->cur.val);
-		mutex_unlock(dev->ctrl_hdl_user_gen.lock);
-		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
-		if (dev->button_pressed) {
-			dev->button_pressed--;
-			snprintf(str, sizeof(str), " button pressed!");
-			tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
-		}
-		if (dev->osd[0]) {
-			if (vivid_is_hdmi_cap(dev)) {
-				snprintf(str, sizeof(str),
-					 " OSD \"%s\"", dev->osd);
-				tpg_gen_text(tpg, basep, line++ * line_height,
-					     16, str);
-			}
-			if (dev->osd_jiffies &&
-			    time_is_before_jiffies(dev->osd_jiffies + 5 * HZ)) {
-				dev->osd[0] = 0;
-				dev->osd_jiffies = 0;
-			}
-		}
-	}
-}
-
-/*
- * Return true if this pixel coordinate is a valid video pixel.
- */
-static bool valid_pix(struct vivid_dev *dev, int win_y, int win_x, int fb_y, int fb_x)
-{
-	int i;
-
-	if (dev->bitmap_cap) {
-		/*
-		 * Only if the corresponding bit in the bitmap is set can
-		 * the video pixel be shown. Coordinates are relative to
-		 * the overlay window set by VIDIOC_S_FMT.
-		 */
-		const u8 *p = dev->bitmap_cap;
-		unsigned stride = (dev->compose_cap.width + 7) / 8;
-
-		if (!(p[stride * win_y + win_x / 8] & (1 << (win_x & 7))))
-			return false;
-	}
-
-	for (i = 0; i < dev->clipcount_cap; i++) {
-		/*
-		 * Only if the framebuffer coordinate is not in any of the
-		 * clip rectangles will be video pixel be shown.
-		 */
-		struct v4l2_rect *r = &dev->clips_cap[i].c;
-
-		if (fb_y >= r->top && fb_y < r->top + r->height &&
-		    fb_x >= r->left && fb_x < r->left + r->width)
-			return false;
-	}
-	return true;
-}
-
-/*
- * Draw the image into the overlay buffer.
- * Note that the combination of overlay and multiplanar is not supported.
- */
-static void vivid_overlay(struct vivid_dev *dev, struct vivid_buffer *buf)
-{
-	struct tpg_data *tpg = &dev->tpg;
-	unsigned pixsize = tpg_g_twopixelsize(tpg, 0) / 2;
-	void *vbase = dev->fb_vbase_cap;
-	void *vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
-	unsigned img_width = dev->compose_cap.width;
-	unsigned img_height = dev->compose_cap.height;
-	unsigned stride = tpg->bytesperline[0];
-	/* if quick is true, then valid_pix() doesn't have to be called */
-	bool quick = dev->bitmap_cap == NULL && dev->clipcount_cap == 0;
-	int x, y, w, out_x = 0;
-
-	/*
-	 * Overlay support is only supported for formats that have a twopixelsize
-	 * that's >= 2. Warn and bail out if that's not the case.
-	 */
-	if (WARN_ON(pixsize == 0))
-		return;
-	if ((dev->overlay_cap_field == V4L2_FIELD_TOP ||
-	     dev->overlay_cap_field == V4L2_FIELD_BOTTOM) &&
-	    dev->overlay_cap_field != buf->vb.field)
-		return;
-
-	vbuf += dev->compose_cap.left * pixsize + dev->compose_cap.top * stride;
-	x = dev->overlay_cap_left;
-	w = img_width;
-	if (x < 0) {
-		out_x = -x;
-		w = w - out_x;
-		x = 0;
-	} else {
-		w = dev->fb_cap.fmt.width - x;
-		if (w > img_width)
-			w = img_width;
-	}
-	if (w <= 0)
-		return;
-	if (dev->overlay_cap_top >= 0)
-		vbase += dev->overlay_cap_top * dev->fb_cap.fmt.bytesperline;
-	for (y = dev->overlay_cap_top;
-	     y < dev->overlay_cap_top + (int)img_height;
-	     y++, vbuf += stride) {
-		int px;
-
-		if (y < 0 || y > dev->fb_cap.fmt.height)
-			continue;
-		if (quick) {
-			memcpy(vbase + x * pixsize,
-			       vbuf + out_x * pixsize, w * pixsize);
-			vbase += dev->fb_cap.fmt.bytesperline;
-			continue;
-		}
-		for (px = 0; px < w; px++) {
-			if (!valid_pix(dev, y - dev->overlay_cap_top,
-				       px + out_x, y, px + x))
-				continue;
-			memcpy(vbase + (px + x) * pixsize,
-			       vbuf + (px + out_x) * pixsize,
-			       pixsize);
-		}
-		vbase += dev->fb_cap.fmt.bytesperline;
-	}
-}
-
-static void vivid_cap_update_frame_period(struct vivid_dev *dev)
-{
-	u64 f_period;
-
-	f_period = (u64)dev->timeperframe_vid_cap.numerator * 1000000000;
-	if (WARN_ON(dev->timeperframe_vid_cap.denominator == 0))
-		dev->timeperframe_vid_cap.denominator = 1;
-	do_div(f_period, dev->timeperframe_vid_cap.denominator);
-	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
-		f_period >>= 1;
-	/*
-	 * If "End of Frame", then offset the exposure time by 0.9
-	 * of the frame period.
-	 */
-	dev->cap_frame_eof_offset = f_period * 9;
-	do_div(dev->cap_frame_eof_offset, 10);
-	dev->cap_frame_period = f_period;
-}
-
-static noinline_for_stack void vivid_thread_vid_cap_tick(struct vivid_dev *dev,
-							 int dropped_bufs)
-{
-	struct vivid_buffer *vid_cap_buf = NULL;
-	struct vivid_buffer *vbi_cap_buf = NULL;
-	struct vivid_buffer *meta_cap_buf = NULL;
-	u64 f_time = 0;
-
-	dprintk(dev, 1, "Video Capture Thread Tick\n");
-
-	while (dropped_bufs-- > 1)
-		tpg_update_mv_count(&dev->tpg,
-				dev->field_cap == V4L2_FIELD_NONE ||
-				dev->field_cap == V4L2_FIELD_ALTERNATE);
-
-	/* Drop a certain percentage of buffers. */
-	if (dev->perc_dropped_buffers &&
-	    prandom_u32_max(100) < dev->perc_dropped_buffers)
-		goto update_mv;
-
-	spin_lock(&dev->slock);
-	if (!list_empty(&dev->vid_cap_active)) {
-		vid_cap_buf = list_entry(dev->vid_cap_active.next, struct vivid_buffer, list);
-		list_del(&vid_cap_buf->list);
-	}
-	if (!list_empty(&dev->vbi_cap_active)) {
-		if (dev->field_cap != V4L2_FIELD_ALTERNATE ||
-		    (dev->vbi_cap_seq_count & 1)) {
-			vbi_cap_buf = list_entry(dev->vbi_cap_active.next,
-						 struct vivid_buffer, list);
-			list_del(&vbi_cap_buf->list);
-		}
-	}
-	if (!list_empty(&dev->meta_cap_active)) {
-		meta_cap_buf = list_entry(dev->meta_cap_active.next,
-					  struct vivid_buffer, list);
-		list_del(&meta_cap_buf->list);
-	}
-
-	spin_unlock(&dev->slock);
-
-	if (!vid_cap_buf && !vbi_cap_buf && !meta_cap_buf)
-		goto update_mv;
-
-	f_time = dev->cap_frame_period * dev->vid_cap_seq_count +
-		 dev->cap_stream_start + dev->time_wrap_offset;
-
-	if (vid_cap_buf) {
-		v4l2_ctrl_request_setup(vid_cap_buf->vb.vb2_buf.req_obj.req,
-					&dev->ctrl_hdl_vid_cap);
-		/* Fill buffer */
-		vivid_fillbuff(dev, vid_cap_buf);
-		dprintk(dev, 1, "filled buffer %d\n",
-			vid_cap_buf->vb.vb2_buf.index);
-
-		/* Handle overlay */
-		if (dev->overlay_cap_owner && dev->fb_cap.base &&
-			dev->fb_cap.fmt.pixelformat == dev->fmt_cap->fourcc)
-			vivid_overlay(dev, vid_cap_buf);
-
-		v4l2_ctrl_request_complete(vid_cap_buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_vid_cap);
-		vb2_buffer_done(&vid_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
-				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-		dprintk(dev, 2, "vid_cap buffer %d done\n",
-				vid_cap_buf->vb.vb2_buf.index);
-
-		vid_cap_buf->vb.vb2_buf.timestamp = f_time;
-		if (!dev->tstamp_src_is_soe)
-			vid_cap_buf->vb.vb2_buf.timestamp += dev->cap_frame_eof_offset;
-	}
-
-	if (vbi_cap_buf) {
-		u64 vbi_period;
-
-		v4l2_ctrl_request_setup(vbi_cap_buf->vb.vb2_buf.req_obj.req,
-					&dev->ctrl_hdl_vbi_cap);
-		if (dev->stream_sliced_vbi_cap)
-			vivid_sliced_vbi_cap_process(dev, vbi_cap_buf);
-		else
-			vivid_raw_vbi_cap_process(dev, vbi_cap_buf);
-		v4l2_ctrl_request_complete(vbi_cap_buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_vbi_cap);
-		vb2_buffer_done(&vbi_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
-				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-		dprintk(dev, 2, "vbi_cap %d done\n",
-				vbi_cap_buf->vb.vb2_buf.index);
-
-		/* If capturing a VBI, offset by 0.05 */
-		vbi_period = dev->cap_frame_period * 5;
-		do_div(vbi_period, 100);
-		vbi_cap_buf->vb.vb2_buf.timestamp = f_time + dev->cap_frame_eof_offset + vbi_period;
-	}
-
-	if (meta_cap_buf) {
-		v4l2_ctrl_request_setup(meta_cap_buf->vb.vb2_buf.req_obj.req,
-					&dev->ctrl_hdl_meta_cap);
-		vivid_meta_cap_fillbuff(dev, meta_cap_buf, f_time);
-		v4l2_ctrl_request_complete(meta_cap_buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_meta_cap);
-		vb2_buffer_done(&meta_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
-				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-		dprintk(dev, 2, "meta_cap %d done\n",
-			meta_cap_buf->vb.vb2_buf.index);
-		meta_cap_buf->vb.vb2_buf.timestamp = f_time + dev->cap_frame_eof_offset;
-	}
-
-	dev->dqbuf_error = false;
-
-update_mv:
-	/* Update the test pattern movement counters */
-	tpg_update_mv_count(&dev->tpg, dev->field_cap == V4L2_FIELD_NONE ||
-				       dev->field_cap == V4L2_FIELD_ALTERNATE);
-}
-
-static int vivid_thread_vid_cap(void *data)
-{
-	struct vivid_dev *dev = data;
-	u64 numerators_since_start;
-	u64 buffers_since_start;
-	u64 next_jiffies_since_start;
-	unsigned long jiffies_since_start;
-	unsigned long cur_jiffies;
-	unsigned wait_jiffies;
-	unsigned numerator;
-	unsigned denominator;
-	int dropped_bufs;
-
-	dprintk(dev, 1, "Video Capture Thread Start\n");
-
-	set_freezable();
-
-	/* Resets frame counters */
-	dev->cap_seq_offset = 0;
-	dev->cap_seq_count = 0;
-	dev->cap_seq_resync = false;
-	dev->jiffies_vid_cap = jiffies;
-	dev->cap_stream_start = ktime_get_ns();
-	vivid_cap_update_frame_period(dev);
-
-	for (;;) {
-		try_to_freeze();
-		if (kthread_should_stop())
-			break;
-
-		if (!mutex_trylock(&dev->mutex)) {
-			schedule_timeout_uninterruptible(1);
-			continue;
-		}
-
-		cur_jiffies = jiffies;
-		if (dev->cap_seq_resync) {
-			dev->jiffies_vid_cap = cur_jiffies;
-			dev->cap_seq_offset = dev->cap_seq_count + 1;
-			dev->cap_seq_count = 0;
-			dev->cap_stream_start += dev->cap_frame_period *
-						 dev->cap_seq_offset;
-			vivid_cap_update_frame_period(dev);
-			dev->cap_seq_resync = false;
-		}
-		numerator = dev->timeperframe_vid_cap.numerator;
-		denominator = dev->timeperframe_vid_cap.denominator;
-
-		if (dev->field_cap == V4L2_FIELD_ALTERNATE)
-			denominator *= 2;
-
-		/* Calculate the number of jiffies since we started streaming */
-		jiffies_since_start = cur_jiffies - dev->jiffies_vid_cap;
-		/* Get the number of buffers streamed since the start */
-		buffers_since_start = (u64)jiffies_since_start * denominator +
-				      (HZ * numerator) / 2;
-		do_div(buffers_since_start, HZ * numerator);
-
-		/*
-		 * After more than 0xf0000000 (rounded down to a multiple of
-		 * 'jiffies-per-day' to ease jiffies_to_msecs calculation)
-		 * jiffies have passed since we started streaming reset the
-		 * counters and keep track of the sequence offset.
-		 */
-		if (jiffies_since_start > JIFFIES_RESYNC) {
-			dev->jiffies_vid_cap = cur_jiffies;
-			dev->cap_seq_offset = buffers_since_start;
-			buffers_since_start = 0;
-		}
-		dropped_bufs = buffers_since_start + dev->cap_seq_offset - dev->cap_seq_count;
-		dev->cap_seq_count = buffers_since_start + dev->cap_seq_offset;
-		dev->vid_cap_seq_count = dev->cap_seq_count - dev->vid_cap_seq_start;
-		dev->vbi_cap_seq_count = dev->cap_seq_count - dev->vbi_cap_seq_start;
-		dev->meta_cap_seq_count = dev->cap_seq_count - dev->meta_cap_seq_start;
-
-		vivid_thread_vid_cap_tick(dev, dropped_bufs);
-
-		/*
-		 * Calculate the number of 'numerators' streamed since we started,
-		 * including the current buffer.
-		 */
-		numerators_since_start = ++buffers_since_start * numerator;
-
-		/* And the number of jiffies since we started */
-		jiffies_since_start = jiffies - dev->jiffies_vid_cap;
-
-		mutex_unlock(&dev->mutex);
-
-		/*
-		 * Calculate when that next buffer is supposed to start
-		 * in jiffies since we started streaming.
-		 */
-		next_jiffies_since_start = numerators_since_start * HZ +
-					   denominator / 2;
-		do_div(next_jiffies_since_start, denominator);
-		/* If it is in the past, then just schedule asap */
-		if (next_jiffies_since_start < jiffies_since_start)
-			next_jiffies_since_start = jiffies_since_start;
-
-		wait_jiffies = next_jiffies_since_start - jiffies_since_start;
-		schedule_timeout_interruptible(wait_jiffies ? wait_jiffies : 1);
-	}
-	dprintk(dev, 1, "Video Capture Thread End\n");
-	return 0;
-}
-
-static void vivid_grab_controls(struct vivid_dev *dev, bool grab)
-{
-	v4l2_ctrl_grab(dev->ctrl_has_crop_cap, grab);
-	v4l2_ctrl_grab(dev->ctrl_has_compose_cap, grab);
-	v4l2_ctrl_grab(dev->ctrl_has_scaler_cap, grab);
-}
-
-int vivid_start_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming)
-{
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->kthread_vid_cap) {
-		u32 seq_count = dev->cap_seq_count + dev->seq_wrap * 128;
-
-		if (pstreaming == &dev->vid_cap_streaming)
-			dev->vid_cap_seq_start = seq_count;
-		else if (pstreaming == &dev->vbi_cap_streaming)
-			dev->vbi_cap_seq_start = seq_count;
-		else
-			dev->meta_cap_seq_start = seq_count;
-		*pstreaming = true;
-		return 0;
-	}
-
-	/* Resets frame counters */
-	tpg_init_mv_count(&dev->tpg);
-
-	dev->vid_cap_seq_start = dev->seq_wrap * 128;
-	dev->vbi_cap_seq_start = dev->seq_wrap * 128;
-	dev->meta_cap_seq_start = dev->seq_wrap * 128;
-
-	dev->kthread_vid_cap = kthread_run(vivid_thread_vid_cap, dev,
-			"%s-vid-cap", dev->v4l2_dev.name);
-
-	if (IS_ERR(dev->kthread_vid_cap)) {
-		int err = PTR_ERR(dev->kthread_vid_cap);
-
-		dev->kthread_vid_cap = NULL;
-		v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n");
-		return err;
-	}
-	*pstreaming = true;
-	vivid_grab_controls(dev, true);
-
-	dprintk(dev, 1, "returning from %s\n", __func__);
-	return 0;
-}
-
-void vivid_stop_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming)
-{
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->kthread_vid_cap == NULL)
-		return;
-
-	*pstreaming = false;
-	if (pstreaming == &dev->vid_cap_streaming) {
-		/* Release all active buffers */
-		while (!list_empty(&dev->vid_cap_active)) {
-			struct vivid_buffer *buf;
-
-			buf = list_entry(dev->vid_cap_active.next,
-					 struct vivid_buffer, list);
-			list_del(&buf->list);
-			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
-						   &dev->ctrl_hdl_vid_cap);
-			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-			dprintk(dev, 2, "vid_cap buffer %d done\n",
-				buf->vb.vb2_buf.index);
-		}
-	}
-
-	if (pstreaming == &dev->vbi_cap_streaming) {
-		while (!list_empty(&dev->vbi_cap_active)) {
-			struct vivid_buffer *buf;
-
-			buf = list_entry(dev->vbi_cap_active.next,
-					 struct vivid_buffer, list);
-			list_del(&buf->list);
-			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
-						   &dev->ctrl_hdl_vbi_cap);
-			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-			dprintk(dev, 2, "vbi_cap buffer %d done\n",
-				buf->vb.vb2_buf.index);
-		}
-	}
-
-	if (pstreaming == &dev->meta_cap_streaming) {
-		while (!list_empty(&dev->meta_cap_active)) {
-			struct vivid_buffer *buf;
-
-			buf = list_entry(dev->meta_cap_active.next,
-					 struct vivid_buffer, list);
-			list_del(&buf->list);
-			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
-						   &dev->ctrl_hdl_meta_cap);
-			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-			dprintk(dev, 2, "meta_cap buffer %d done\n",
-				buf->vb.vb2_buf.index);
-		}
-	}
-
-	if (dev->vid_cap_streaming || dev->vbi_cap_streaming ||
-	    dev->meta_cap_streaming)
-		return;
-
-	/* shutdown control thread */
-	vivid_grab_controls(dev, false);
-	kthread_stop(dev->kthread_vid_cap);
-	dev->kthread_vid_cap = NULL;
-}
diff --git a/drivers/media/platform/vivid/vivid-kthread-cap.h b/drivers/media/platform/vivid/vivid-kthread-cap.h
deleted file mode 100644
index 0f43015306d6..000000000000
--- a/drivers/media/platform/vivid/vivid-kthread-cap.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-kthread-cap.h - video/vbi capture thread support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_KTHREAD_CAP_H_
-#define _VIVID_KTHREAD_CAP_H_
-
-int vivid_start_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming);
-void vivid_stop_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-kthread-out.c b/drivers/media/platform/vivid/vivid-kthread-out.c
deleted file mode 100644
index 6780687978f9..000000000000
--- a/drivers/media/platform/vivid/vivid-kthread-out.c
+++ /dev/null
@@ -1,353 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-kthread-out.h - video/vbi output thread support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/font.h>
-#include <linux/mutex.h>
-#include <linux/videodev2.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/random.h>
-#include <linux/v4l2-dv-timings.h>
-#include <asm/div64.h>
-#include <media/videobuf2-vmalloc.h>
-#include <media/v4l2-dv-timings.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-fh.h>
-#include <media/v4l2-event.h>
-
-#include "vivid-core.h"
-#include "vivid-vid-common.h"
-#include "vivid-vid-cap.h"
-#include "vivid-vid-out.h"
-#include "vivid-radio-common.h"
-#include "vivid-radio-rx.h"
-#include "vivid-radio-tx.h"
-#include "vivid-sdr-cap.h"
-#include "vivid-vbi-cap.h"
-#include "vivid-vbi-out.h"
-#include "vivid-osd.h"
-#include "vivid-ctrls.h"
-#include "vivid-kthread-out.h"
-#include "vivid-meta-out.h"
-
-static void vivid_thread_vid_out_tick(struct vivid_dev *dev)
-{
-	struct vivid_buffer *vid_out_buf = NULL;
-	struct vivid_buffer *vbi_out_buf = NULL;
-	struct vivid_buffer *meta_out_buf = NULL;
-
-	dprintk(dev, 1, "Video Output Thread Tick\n");
-
-	/* Drop a certain percentage of buffers. */
-	if (dev->perc_dropped_buffers &&
-	    prandom_u32_max(100) < dev->perc_dropped_buffers)
-		return;
-
-	spin_lock(&dev->slock);
-	/*
-	 * Only dequeue buffer if there is at least one more pending.
-	 * This makes video loopback possible.
-	 */
-	if (!list_empty(&dev->vid_out_active) &&
-	    !list_is_singular(&dev->vid_out_active)) {
-		vid_out_buf = list_entry(dev->vid_out_active.next,
-					 struct vivid_buffer, list);
-		list_del(&vid_out_buf->list);
-	}
-	if (!list_empty(&dev->vbi_out_active) &&
-	    (dev->field_out != V4L2_FIELD_ALTERNATE ||
-	     (dev->vbi_out_seq_count & 1))) {
-		vbi_out_buf = list_entry(dev->vbi_out_active.next,
-					 struct vivid_buffer, list);
-		list_del(&vbi_out_buf->list);
-	}
-	if (!list_empty(&dev->meta_out_active)) {
-		meta_out_buf = list_entry(dev->meta_out_active.next,
-					  struct vivid_buffer, list);
-		list_del(&meta_out_buf->list);
-	}
-	spin_unlock(&dev->slock);
-
-	if (!vid_out_buf && !vbi_out_buf && !meta_out_buf)
-		return;
-
-	if (vid_out_buf) {
-		v4l2_ctrl_request_setup(vid_out_buf->vb.vb2_buf.req_obj.req,
-					&dev->ctrl_hdl_vid_out);
-		v4l2_ctrl_request_complete(vid_out_buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_vid_out);
-		vid_out_buf->vb.sequence = dev->vid_out_seq_count;
-		if (dev->field_out == V4L2_FIELD_ALTERNATE) {
-			/*
-			 * The sequence counter counts frames, not fields.
-			 * So divide by two.
-			 */
-			vid_out_buf->vb.sequence /= 2;
-		}
-		vid_out_buf->vb.vb2_buf.timestamp =
-			ktime_get_ns() + dev->time_wrap_offset;
-		vb2_buffer_done(&vid_out_buf->vb.vb2_buf, dev->dqbuf_error ?
-				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-		dprintk(dev, 2, "vid_out buffer %d done\n",
-			vid_out_buf->vb.vb2_buf.index);
-	}
-
-	if (vbi_out_buf) {
-		v4l2_ctrl_request_setup(vbi_out_buf->vb.vb2_buf.req_obj.req,
-					&dev->ctrl_hdl_vbi_out);
-		v4l2_ctrl_request_complete(vbi_out_buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_vbi_out);
-		if (dev->stream_sliced_vbi_out)
-			vivid_sliced_vbi_out_process(dev, vbi_out_buf);
-
-		vbi_out_buf->vb.sequence = dev->vbi_out_seq_count;
-		vbi_out_buf->vb.vb2_buf.timestamp =
-			ktime_get_ns() + dev->time_wrap_offset;
-		vb2_buffer_done(&vbi_out_buf->vb.vb2_buf, dev->dqbuf_error ?
-				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-		dprintk(dev, 2, "vbi_out buffer %d done\n",
-			vbi_out_buf->vb.vb2_buf.index);
-	}
-	if (meta_out_buf) {
-		v4l2_ctrl_request_setup(meta_out_buf->vb.vb2_buf.req_obj.req,
-					&dev->ctrl_hdl_meta_out);
-		v4l2_ctrl_request_complete(meta_out_buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_meta_out);
-		vivid_meta_out_process(dev, meta_out_buf);
-		meta_out_buf->vb.sequence = dev->meta_out_seq_count;
-		meta_out_buf->vb.vb2_buf.timestamp =
-			ktime_get_ns() + dev->time_wrap_offset;
-		vb2_buffer_done(&meta_out_buf->vb.vb2_buf, dev->dqbuf_error ?
-				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-		dprintk(dev, 2, "meta_out buffer %d done\n",
-			meta_out_buf->vb.vb2_buf.index);
-	}
-
-	dev->dqbuf_error = false;
-}
-
-static int vivid_thread_vid_out(void *data)
-{
-	struct vivid_dev *dev = data;
-	u64 numerators_since_start;
-	u64 buffers_since_start;
-	u64 next_jiffies_since_start;
-	unsigned long jiffies_since_start;
-	unsigned long cur_jiffies;
-	unsigned wait_jiffies;
-	unsigned numerator;
-	unsigned denominator;
-
-	dprintk(dev, 1, "Video Output Thread Start\n");
-
-	set_freezable();
-
-	/* Resets frame counters */
-	dev->out_seq_offset = 0;
-	if (dev->seq_wrap)
-		dev->out_seq_count = 0xffffff80U;
-	dev->jiffies_vid_out = jiffies;
-	dev->vid_out_seq_start = dev->vbi_out_seq_start = 0;
-	dev->meta_out_seq_start = 0;
-	dev->out_seq_resync = false;
-
-	for (;;) {
-		try_to_freeze();
-		if (kthread_should_stop())
-			break;
-
-		if (!mutex_trylock(&dev->mutex)) {
-			schedule_timeout_uninterruptible(1);
-			continue;
-		}
-
-		cur_jiffies = jiffies;
-		if (dev->out_seq_resync) {
-			dev->jiffies_vid_out = cur_jiffies;
-			dev->out_seq_offset = dev->out_seq_count + 1;
-			dev->out_seq_count = 0;
-			dev->out_seq_resync = false;
-		}
-		numerator = dev->timeperframe_vid_out.numerator;
-		denominator = dev->timeperframe_vid_out.denominator;
-
-		if (dev->field_out == V4L2_FIELD_ALTERNATE)
-			denominator *= 2;
-
-		/* Calculate the number of jiffies since we started streaming */
-		jiffies_since_start = cur_jiffies - dev->jiffies_vid_out;
-		/* Get the number of buffers streamed since the start */
-		buffers_since_start = (u64)jiffies_since_start * denominator +
-				      (HZ * numerator) / 2;
-		do_div(buffers_since_start, HZ * numerator);
-
-		/*
-		 * After more than 0xf0000000 (rounded down to a multiple of
-		 * 'jiffies-per-day' to ease jiffies_to_msecs calculation)
-		 * jiffies have passed since we started streaming reset the
-		 * counters and keep track of the sequence offset.
-		 */
-		if (jiffies_since_start > JIFFIES_RESYNC) {
-			dev->jiffies_vid_out = cur_jiffies;
-			dev->out_seq_offset = buffers_since_start;
-			buffers_since_start = 0;
-		}
-		dev->out_seq_count = buffers_since_start + dev->out_seq_offset;
-		dev->vid_out_seq_count = dev->out_seq_count - dev->vid_out_seq_start;
-		dev->vbi_out_seq_count = dev->out_seq_count - dev->vbi_out_seq_start;
-		dev->meta_out_seq_count = dev->out_seq_count - dev->meta_out_seq_start;
-
-		vivid_thread_vid_out_tick(dev);
-		mutex_unlock(&dev->mutex);
-
-		/*
-		 * Calculate the number of 'numerators' streamed since we started,
-		 * not including the current buffer.
-		 */
-		numerators_since_start = buffers_since_start * numerator;
-
-		/* And the number of jiffies since we started */
-		jiffies_since_start = jiffies - dev->jiffies_vid_out;
-
-		/* Increase by the 'numerator' of one buffer */
-		numerators_since_start += numerator;
-		/*
-		 * Calculate when that next buffer is supposed to start
-		 * in jiffies since we started streaming.
-		 */
-		next_jiffies_since_start = numerators_since_start * HZ +
-					   denominator / 2;
-		do_div(next_jiffies_since_start, denominator);
-		/* If it is in the past, then just schedule asap */
-		if (next_jiffies_since_start < jiffies_since_start)
-			next_jiffies_since_start = jiffies_since_start;
-
-		wait_jiffies = next_jiffies_since_start - jiffies_since_start;
-		schedule_timeout_interruptible(wait_jiffies ? wait_jiffies : 1);
-	}
-	dprintk(dev, 1, "Video Output Thread End\n");
-	return 0;
-}
-
-static void vivid_grab_controls(struct vivid_dev *dev, bool grab)
-{
-	v4l2_ctrl_grab(dev->ctrl_has_crop_out, grab);
-	v4l2_ctrl_grab(dev->ctrl_has_compose_out, grab);
-	v4l2_ctrl_grab(dev->ctrl_has_scaler_out, grab);
-	v4l2_ctrl_grab(dev->ctrl_tx_mode, grab);
-	v4l2_ctrl_grab(dev->ctrl_tx_rgb_range, grab);
-}
-
-int vivid_start_generating_vid_out(struct vivid_dev *dev, bool *pstreaming)
-{
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->kthread_vid_out) {
-		u32 seq_count = dev->out_seq_count + dev->seq_wrap * 128;
-
-		if (pstreaming == &dev->vid_out_streaming)
-			dev->vid_out_seq_start = seq_count;
-		else if (pstreaming == &dev->vbi_out_streaming)
-			dev->vbi_out_seq_start = seq_count;
-		else
-			dev->meta_out_seq_start = seq_count;
-		*pstreaming = true;
-		return 0;
-	}
-
-	/* Resets frame counters */
-	dev->jiffies_vid_out = jiffies;
-	dev->vid_out_seq_start = dev->seq_wrap * 128;
-	dev->vbi_out_seq_start = dev->seq_wrap * 128;
-	dev->meta_out_seq_start = dev->seq_wrap * 128;
-
-	dev->kthread_vid_out = kthread_run(vivid_thread_vid_out, dev,
-			"%s-vid-out", dev->v4l2_dev.name);
-
-	if (IS_ERR(dev->kthread_vid_out)) {
-		int err = PTR_ERR(dev->kthread_vid_out);
-
-		dev->kthread_vid_out = NULL;
-		v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n");
-		return err;
-	}
-	*pstreaming = true;
-	vivid_grab_controls(dev, true);
-
-	dprintk(dev, 1, "returning from %s\n", __func__);
-	return 0;
-}
-
-void vivid_stop_generating_vid_out(struct vivid_dev *dev, bool *pstreaming)
-{
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->kthread_vid_out == NULL)
-		return;
-
-	*pstreaming = false;
-	if (pstreaming == &dev->vid_out_streaming) {
-		/* Release all active buffers */
-		while (!list_empty(&dev->vid_out_active)) {
-			struct vivid_buffer *buf;
-
-			buf = list_entry(dev->vid_out_active.next,
-					 struct vivid_buffer, list);
-			list_del(&buf->list);
-			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
-						   &dev->ctrl_hdl_vid_out);
-			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-			dprintk(dev, 2, "vid_out buffer %d done\n",
-				buf->vb.vb2_buf.index);
-		}
-	}
-
-	if (pstreaming == &dev->vbi_out_streaming) {
-		while (!list_empty(&dev->vbi_out_active)) {
-			struct vivid_buffer *buf;
-
-			buf = list_entry(dev->vbi_out_active.next,
-					 struct vivid_buffer, list);
-			list_del(&buf->list);
-			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
-						   &dev->ctrl_hdl_vbi_out);
-			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-			dprintk(dev, 2, "vbi_out buffer %d done\n",
-				buf->vb.vb2_buf.index);
-		}
-	}
-
-	if (pstreaming == &dev->meta_out_streaming) {
-		while (!list_empty(&dev->meta_out_active)) {
-			struct vivid_buffer *buf;
-
-			buf = list_entry(dev->meta_out_active.next,
-					 struct vivid_buffer, list);
-			list_del(&buf->list);
-			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
-						   &dev->ctrl_hdl_meta_out);
-			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-			dprintk(dev, 2, "meta_out buffer %d done\n",
-				buf->vb.vb2_buf.index);
-		}
-	}
-
-	if (dev->vid_out_streaming || dev->vbi_out_streaming ||
-	    dev->meta_out_streaming)
-		return;
-
-	/* shutdown control thread */
-	vivid_grab_controls(dev, false);
-	kthread_stop(dev->kthread_vid_out);
-	dev->kthread_vid_out = NULL;
-}
diff --git a/drivers/media/platform/vivid/vivid-kthread-out.h b/drivers/media/platform/vivid/vivid-kthread-out.h
deleted file mode 100644
index d5bcf44bbaca..000000000000
--- a/drivers/media/platform/vivid/vivid-kthread-out.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-kthread-out.h - video/vbi output thread support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_KTHREAD_OUT_H_
-#define _VIVID_KTHREAD_OUT_H_
-
-int vivid_start_generating_vid_out(struct vivid_dev *dev, bool *pstreaming);
-void vivid_stop_generating_vid_out(struct vivid_dev *dev, bool *pstreaming);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-kthread-touch.c b/drivers/media/platform/vivid/vivid-kthread-touch.c
deleted file mode 100644
index 674507b5ccb5..000000000000
--- a/drivers/media/platform/vivid/vivid-kthread-touch.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-kthread-touch.c - touch capture thread support functions.
- *
- */
-
-#include <linux/freezer.h>
-#include "vivid-core.h"
-#include "vivid-kthread-touch.h"
-#include "vivid-touch-cap.h"
-
-static noinline_for_stack void vivid_thread_tch_cap_tick(struct vivid_dev *dev,
-							 int dropped_bufs)
-{
-	struct vivid_buffer *tch_cap_buf = NULL;
-
-	spin_lock(&dev->slock);
-	if (!list_empty(&dev->touch_cap_active)) {
-		tch_cap_buf = list_entry(dev->touch_cap_active.next,
-					 struct vivid_buffer, list);
-		list_del(&tch_cap_buf->list);
-	}
-
-	spin_unlock(&dev->slock);
-
-	if (tch_cap_buf) {
-		v4l2_ctrl_request_setup(tch_cap_buf->vb.vb2_buf.req_obj.req,
-					&dev->ctrl_hdl_touch_cap);
-
-		vivid_fillbuff_tch(dev, tch_cap_buf);
-		v4l2_ctrl_request_complete(tch_cap_buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_touch_cap);
-		vb2_buffer_done(&tch_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
-				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-		dprintk(dev, 2, "touch_cap buffer %d done\n",
-			tch_cap_buf->vb.vb2_buf.index);
-
-		tch_cap_buf->vb.vb2_buf.timestamp = ktime_get_ns() + dev->time_wrap_offset;
-	}
-	dev->dqbuf_error = false;
-}
-
-static int vivid_thread_touch_cap(void *data)
-{
-	struct vivid_dev *dev = data;
-	u64 numerators_since_start;
-	u64 buffers_since_start;
-	u64 next_jiffies_since_start;
-	unsigned long jiffies_since_start;
-	unsigned long cur_jiffies;
-	unsigned int wait_jiffies;
-	unsigned int numerator;
-	unsigned int denominator;
-	int dropped_bufs;
-
-	dprintk(dev, 1, "Touch Capture Thread Start\n");
-
-	set_freezable();
-
-	/* Resets frame counters */
-	dev->touch_cap_seq_offset = 0;
-	dev->touch_cap_seq_count = 0;
-	dev->touch_cap_seq_resync = false;
-	dev->jiffies_touch_cap = jiffies;
-
-	for (;;) {
-		try_to_freeze();
-		if (kthread_should_stop())
-			break;
-
-		if (!mutex_trylock(&dev->mutex)) {
-			schedule_timeout_uninterruptible(1);
-			continue;
-		}
-		cur_jiffies = jiffies;
-		if (dev->touch_cap_seq_resync) {
-			dev->jiffies_touch_cap = cur_jiffies;
-			dev->touch_cap_seq_offset = dev->touch_cap_seq_count + 1;
-			dev->touch_cap_seq_count = 0;
-			dev->cap_seq_resync = false;
-		}
-		denominator = dev->timeperframe_tch_cap.denominator;
-		numerator = dev->timeperframe_tch_cap.numerator;
-
-		/* Calculate the number of jiffies since we started streaming */
-		jiffies_since_start = cur_jiffies - dev->jiffies_touch_cap;
-		/* Get the number of buffers streamed since the start */
-		buffers_since_start = (u64)jiffies_since_start * denominator +
-				      (HZ * numerator) / 2;
-		do_div(buffers_since_start, HZ * numerator);
-
-		/*
-		 * After more than 0xf0000000 (rounded down to a multiple of
-		 * 'jiffies-per-day' to ease jiffies_to_msecs calculation)
-		 * jiffies have passed since we started streaming reset the
-		 * counters and keep track of the sequence offset.
-		 */
-		if (jiffies_since_start > JIFFIES_RESYNC) {
-			dev->jiffies_touch_cap = cur_jiffies;
-			dev->cap_seq_offset = buffers_since_start;
-			buffers_since_start = 0;
-		}
-		dropped_bufs = buffers_since_start + dev->touch_cap_seq_offset - dev->touch_cap_seq_count;
-		dev->touch_cap_seq_count = buffers_since_start + dev->touch_cap_seq_offset;
-
-		vivid_thread_tch_cap_tick(dev, dropped_bufs);
-
-		/*
-		 * Calculate the number of 'numerators' streamed
-		 * since we started, including the current buffer.
-		 */
-		numerators_since_start = ++buffers_since_start * numerator;
-
-		/* And the number of jiffies since we started */
-		jiffies_since_start = jiffies - dev->jiffies_touch_cap;
-
-		mutex_unlock(&dev->mutex);
-
-		/*
-		 * Calculate when that next buffer is supposed to start
-		 * in jiffies since we started streaming.
-		 */
-		next_jiffies_since_start = numerators_since_start * HZ +
-					   denominator / 2;
-		do_div(next_jiffies_since_start, denominator);
-		/* If it is in the past, then just schedule asap */
-		if (next_jiffies_since_start < jiffies_since_start)
-			next_jiffies_since_start = jiffies_since_start;
-
-		wait_jiffies = next_jiffies_since_start - jiffies_since_start;
-		schedule_timeout_interruptible(wait_jiffies ? wait_jiffies : 1);
-	}
-	dprintk(dev, 1, "Touch Capture Thread End\n");
-	return 0;
-}
-
-int vivid_start_generating_touch_cap(struct vivid_dev *dev)
-{
-	if (dev->kthread_touch_cap) {
-		dev->touch_cap_streaming = true;
-		return 0;
-	}
-
-	dev->kthread_touch_cap = kthread_run(vivid_thread_touch_cap, dev,
-					     "%s-tch-cap", dev->v4l2_dev.name);
-
-	if (IS_ERR(dev->kthread_touch_cap)) {
-		int err = PTR_ERR(dev->kthread_touch_cap);
-
-		dev->kthread_touch_cap = NULL;
-		v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n");
-		return err;
-	}
-	dev->touch_cap_streaming = true;
-	dprintk(dev, 1, "returning from %s\n", __func__);
-	return 0;
-}
-
-void vivid_stop_generating_touch_cap(struct vivid_dev *dev)
-{
-	if (!dev->kthread_touch_cap)
-		return;
-
-	dev->touch_cap_streaming = false;
-
-	while (!list_empty(&dev->touch_cap_active)) {
-		struct vivid_buffer *buf;
-
-		buf = list_entry(dev->touch_cap_active.next,
-				 struct vivid_buffer, list);
-		list_del(&buf->list);
-		v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_touch_cap);
-		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-		dprintk(dev, 2, "touch_cap buffer %d done\n",
-			buf->vb.vb2_buf.index);
-	}
-
-	kthread_stop(dev->kthread_touch_cap);
-	dev->kthread_touch_cap = NULL;
-}
diff --git a/drivers/media/platform/vivid/vivid-kthread-touch.h b/drivers/media/platform/vivid/vivid-kthread-touch.h
deleted file mode 100644
index ecf79b46209e..000000000000
--- a/drivers/media/platform/vivid/vivid-kthread-touch.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-kthread-cap.h - video/vbi capture thread support functions.
- *
- */
-
-#ifndef _VIVID_KTHREAD_CAP_H_
-#define _VIVID_KTHREAD_CAP_H_
-
-int vivid_start_generating_touch_cap(struct vivid_dev *dev);
-void vivid_stop_generating_touch_cap(struct vivid_dev *dev);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-meta-cap.c b/drivers/media/platform/vivid/vivid-meta-cap.c
deleted file mode 100644
index 780f96860a6d..000000000000
--- a/drivers/media/platform/vivid/vivid-meta-cap.c
+++ /dev/null
@@ -1,201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-meta-cap.c - meta capture support functions.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <linux/usb/video.h>
-
-#include "vivid-core.h"
-#include "vivid-kthread-cap.h"
-#include "vivid-meta-cap.h"
-
-static int meta_cap_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-				unsigned int *nplanes, unsigned int sizes[],
-				struct device *alloc_devs[])
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	unsigned int size =  sizeof(struct vivid_uvc_meta_buf);
-
-	if (!vivid_is_webcam(dev))
-		return -EINVAL;
-
-	if (*nplanes) {
-		if (sizes[0] < size)
-			return -EINVAL;
-	} else {
-		sizes[0] = size;
-	}
-
-	if (vq->num_buffers + *nbuffers < 2)
-		*nbuffers = 2 - vq->num_buffers;
-
-	*nplanes = 1;
-	return 0;
-}
-
-static int meta_cap_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	unsigned int size = sizeof(struct vivid_uvc_meta_buf);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->buf_prepare_error) {
-		/*
-		 * Error injection: test what happens if buf_prepare() returns
-		 * an error.
-		 */
-		dev->buf_prepare_error = false;
-		return -EINVAL;
-	}
-	if (vb2_plane_size(vb, 0) < size) {
-		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
-			__func__, vb2_plane_size(vb, 0), size);
-		return -EINVAL;
-	}
-	vb2_set_plane_payload(vb, 0, size);
-
-	return 0;
-}
-
-static void meta_cap_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	spin_lock(&dev->slock);
-	list_add_tail(&buf->list, &dev->meta_cap_active);
-	spin_unlock(&dev->slock);
-}
-
-static int meta_cap_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	int err;
-
-	dprintk(dev, 1, "%s\n", __func__);
-	dev->meta_cap_seq_count = 0;
-	if (dev->start_streaming_error) {
-		dev->start_streaming_error = false;
-		err = -EINVAL;
-	} else {
-		err = vivid_start_generating_vid_cap(dev,
-						     &dev->meta_cap_streaming);
-	}
-	if (err) {
-		struct vivid_buffer *buf, *tmp;
-
-		list_for_each_entry_safe(buf, tmp,
-					 &dev->meta_cap_active, list) {
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf,
-					VB2_BUF_STATE_QUEUED);
-		}
-	}
-	return err;
-}
-
-/* abort streaming and wait for last buffer */
-static void meta_cap_stop_streaming(struct vb2_queue *vq)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-
-	dprintk(dev, 1, "%s\n", __func__);
-	vivid_stop_generating_vid_cap(dev, &dev->meta_cap_streaming);
-}
-
-static void meta_cap_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_meta_cap);
-}
-
-const struct vb2_ops vivid_meta_cap_qops = {
-	.queue_setup		= meta_cap_queue_setup,
-	.buf_prepare		= meta_cap_buf_prepare,
-	.buf_queue		= meta_cap_buf_queue,
-	.start_streaming	= meta_cap_start_streaming,
-	.stop_streaming		= meta_cap_stop_streaming,
-	.buf_request_complete	= meta_cap_buf_request_complete,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
-};
-
-int vidioc_enum_fmt_meta_cap(struct file *file, void  *priv,
-			     struct v4l2_fmtdesc *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_webcam(dev))
-		return -EINVAL;
-
-	if (f->index > 0)
-		return -EINVAL;
-
-	f->type = V4L2_BUF_TYPE_META_CAPTURE;
-	f->pixelformat = V4L2_META_FMT_UVC;
-	return 0;
-}
-
-int vidioc_g_fmt_meta_cap(struct file *file, void *priv,
-			  struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_meta_format *meta = &f->fmt.meta;
-
-	if (!vivid_is_webcam(dev) || !dev->has_meta_cap)
-		return -EINVAL;
-
-	meta->dataformat = V4L2_META_FMT_UVC;
-	meta->buffersize = sizeof(struct vivid_uvc_meta_buf);
-	return 0;
-}
-
-void vivid_meta_cap_fillbuff(struct vivid_dev *dev,
-			     struct vivid_buffer *buf, u64 soe)
-{
-	struct vivid_uvc_meta_buf *meta = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
-	int buf_off = 0;
-
-	buf->vb.sequence = dev->meta_cap_seq_count;
-	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
-		buf->vb.sequence /= 2;
-	memset(meta, 1, vb2_plane_size(&buf->vb.vb2_buf, 0));
-
-	meta->ns = ktime_get_ns();
-	meta->sof = buf->vb.sequence * 30;
-	meta->length = sizeof(*meta) - offsetof(struct vivid_uvc_meta_buf, length);
-	meta->flags = UVC_STREAM_EOH | UVC_STREAM_EOF;
-
-	if ((buf->vb.sequence % 2) == 0)
-		meta->flags |= UVC_STREAM_FID;
-
-	dprintk(dev, 2, "%s ns:%llu sof:%4d len:%u flags: 0x%02x",
-		__func__, meta->ns, meta->sof, meta->length, meta->flags);
-	if (dev->meta_pts) {
-		meta->flags |= UVC_STREAM_PTS;
-		meta->buf[0] = div_u64(soe, VIVID_META_CLOCK_UNIT);
-		buf_off = 4;
-		dprintk(dev, 2, " pts: %u\n", *(__u32 *)(meta->buf));
-	}
-
-	if (dev->meta_scr) {
-		meta->flags |= UVC_STREAM_SCR;
-		meta->buf[buf_off] = div_u64((soe + dev->cap_frame_eof_offset),
-					     VIVID_META_CLOCK_UNIT);
-
-		meta->buf[buf_off + 4] = (buf->vb.sequence * 30) % 1000;
-		dprintk(dev, 2, " stc: %u, sof counter: %u\n",
-			*(__u32 *)(meta->buf + buf_off),
-			*(__u16 *)(meta->buf + buf_off + 4));
-	}
-	dprintk(dev, 2, "\n");
-}
diff --git a/drivers/media/platform/vivid/vivid-meta-cap.h b/drivers/media/platform/vivid/vivid-meta-cap.h
deleted file mode 100644
index 4670d00d1576..000000000000
--- a/drivers/media/platform/vivid/vivid-meta-cap.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-meta-cap.h - meta capture support functions.
- */
-#ifndef _VIVID_META_CAP_H_
-#define _VIVID_META_CAP_H_
-
-#define VIVID_META_CLOCK_UNIT	10 /* 100 MHz */
-
-struct vivid_uvc_meta_buf {
-	__u64 ns;
-	__u16 sof;
-	__u8 length;
-	__u8 flags;
-	__u8 buf[10]; /* PTS(4)+STC(4)+SOF(2) */
-} __packed;
-
-void vivid_meta_cap_fillbuff(struct vivid_dev *dev,
-			     struct vivid_buffer *buf, u64 soe);
-
-int vidioc_enum_fmt_meta_cap(struct file *file, void  *priv,
-			     struct v4l2_fmtdesc *f);
-
-int vidioc_g_fmt_meta_cap(struct file *file, void *priv,
-			  struct v4l2_format *f);
-
-extern const struct vb2_ops vivid_meta_cap_qops;
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-meta-out.c b/drivers/media/platform/vivid/vivid-meta-out.c
deleted file mode 100644
index ff8a039aba72..000000000000
--- a/drivers/media/platform/vivid/vivid-meta-out.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-meta-out.c - meta output support functions.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <linux/usb/video.h>
-
-#include "vivid-core.h"
-#include "vivid-kthread-out.h"
-#include "vivid-meta-out.h"
-
-static int meta_out_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-				unsigned int *nplanes, unsigned int sizes[],
-				struct device *alloc_devs[])
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	unsigned int size =  sizeof(struct vivid_meta_out_buf);
-
-	if (!vivid_is_webcam(dev))
-		return -EINVAL;
-
-	if (*nplanes) {
-		if (sizes[0] < size)
-			return -EINVAL;
-	} else {
-		sizes[0] = size;
-	}
-
-	if (vq->num_buffers + *nbuffers < 2)
-		*nbuffers = 2 - vq->num_buffers;
-
-	*nplanes = 1;
-	return 0;
-}
-
-static int meta_out_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	unsigned int size = sizeof(struct vivid_meta_out_buf);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->buf_prepare_error) {
-		/*
-		 * Error injection: test what happens if buf_prepare() returns
-		 * an error.
-		 */
-		dev->buf_prepare_error = false;
-		return -EINVAL;
-	}
-	if (vb2_plane_size(vb, 0) < size) {
-		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
-			__func__, vb2_plane_size(vb, 0), size);
-		return -EINVAL;
-	}
-	vb2_set_plane_payload(vb, 0, size);
-
-	return 0;
-}
-
-static void meta_out_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	spin_lock(&dev->slock);
-	list_add_tail(&buf->list, &dev->meta_out_active);
-	spin_unlock(&dev->slock);
-}
-
-static int meta_out_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	int err;
-
-	dprintk(dev, 1, "%s\n", __func__);
-	dev->meta_out_seq_count = 0;
-	if (dev->start_streaming_error) {
-		dev->start_streaming_error = false;
-		err = -EINVAL;
-	} else {
-		err = vivid_start_generating_vid_out(dev,
-						     &dev->meta_out_streaming);
-	}
-	if (err) {
-		struct vivid_buffer *buf, *tmp;
-
-		list_for_each_entry_safe(buf, tmp,
-					 &dev->meta_out_active, list) {
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf,
-					VB2_BUF_STATE_QUEUED);
-		}
-	}
-	return err;
-}
-
-/* abort streaming and wait for last buffer */
-static void meta_out_stop_streaming(struct vb2_queue *vq)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-
-	dprintk(dev, 1, "%s\n", __func__);
-	vivid_stop_generating_vid_out(dev, &dev->meta_out_streaming);
-}
-
-static void meta_out_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_meta_out);
-}
-
-const struct vb2_ops vivid_meta_out_qops = {
-	.queue_setup            = meta_out_queue_setup,
-	.buf_prepare            = meta_out_buf_prepare,
-	.buf_queue              = meta_out_buf_queue,
-	.start_streaming        = meta_out_start_streaming,
-	.stop_streaming         = meta_out_stop_streaming,
-	.buf_request_complete   = meta_out_buf_request_complete,
-	.wait_prepare           = vb2_ops_wait_prepare,
-	.wait_finish            = vb2_ops_wait_finish,
-};
-
-int vidioc_enum_fmt_meta_out(struct file *file, void  *priv,
-			     struct v4l2_fmtdesc *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_webcam(dev))
-		return -EINVAL;
-
-	if (f->index > 0)
-		return -EINVAL;
-
-	f->type = V4L2_BUF_TYPE_META_OUTPUT;
-	f->pixelformat = V4L2_META_FMT_VIVID;
-	return 0;
-}
-
-int vidioc_g_fmt_meta_out(struct file *file, void *priv,
-			  struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_meta_format *meta = &f->fmt.meta;
-
-	if (!vivid_is_webcam(dev) || !dev->has_meta_out)
-		return -EINVAL;
-
-	meta->dataformat = V4L2_META_FMT_VIVID;
-	meta->buffersize = sizeof(struct vivid_meta_out_buf);
-	return 0;
-}
-
-void vivid_meta_out_process(struct vivid_dev *dev,
-			    struct vivid_buffer *buf)
-{
-	struct vivid_meta_out_buf *meta = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
-
-	tpg_s_brightness(&dev->tpg, meta->brightness);
-	tpg_s_contrast(&dev->tpg, meta->contrast);
-	tpg_s_saturation(&dev->tpg, meta->saturation);
-	tpg_s_hue(&dev->tpg, meta->hue);
-	dprintk(dev, 2, " %s brightness %u contrast %u saturation %u hue %d\n",
-		__func__, meta->brightness, meta->contrast,
-		meta->saturation, meta->hue);
-}
diff --git a/drivers/media/platform/vivid/vivid-meta-out.h b/drivers/media/platform/vivid/vivid-meta-out.h
deleted file mode 100644
index 0c639b7c2842..000000000000
--- a/drivers/media/platform/vivid/vivid-meta-out.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-meta-out.h - meta output support functions.
- */
-#ifndef _VIVID_META_OUT_H_
-#define _VIVID_META_OUT_H_
-
-struct vivid_meta_out_buf {
-	u16	brightness;
-	u16	contrast;
-	u16	saturation;
-	s16	hue;
-};
-
-void vivid_meta_out_process(struct vivid_dev *dev, struct vivid_buffer *buf);
-int vidioc_enum_fmt_meta_out(struct file *file, void  *priv,
-			     struct v4l2_fmtdesc *f);
-int vidioc_g_fmt_meta_out(struct file *file, void *priv,
-			  struct v4l2_format *f);
-int vidioc_s_fmt_meta_out(struct file *file, void *priv,
-			  struct v4l2_format *f);
-
-extern const struct vb2_ops vivid_meta_out_qops;
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-osd.c b/drivers/media/platform/vivid/vivid-osd.c
deleted file mode 100644
index fbaec8acc161..000000000000
--- a/drivers/media/platform/vivid/vivid-osd.c
+++ /dev/null
@@ -1,388 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-osd.c - osd support for testing overlays.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/font.h>
-#include <linux/mutex.h>
-#include <linux/videodev2.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/fb.h>
-#include <media/videobuf2-vmalloc.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-fh.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-common.h>
-
-#include "vivid-core.h"
-#include "vivid-osd.h"
-
-#define MAX_OSD_WIDTH  720
-#define MAX_OSD_HEIGHT 576
-
-/*
- * Order: white, yellow, cyan, green, magenta, red, blue, black,
- * and same again with the alpha bit set (if any)
- */
-static const u16 rgb555[16] = {
-	0x7fff, 0x7fe0, 0x03ff, 0x03e0, 0x7c1f, 0x7c00, 0x001f, 0x0000,
-	0xffff, 0xffe0, 0x83ff, 0x83e0, 0xfc1f, 0xfc00, 0x801f, 0x8000
-};
-
-static const u16 rgb565[16] = {
-	0xffff, 0xffe0, 0x07ff, 0x07e0, 0xf81f, 0xf800, 0x001f, 0x0000,
-	0xffff, 0xffe0, 0x07ff, 0x07e0, 0xf81f, 0xf800, 0x001f, 0x0000
-};
-
-void vivid_clear_fb(struct vivid_dev *dev)
-{
-	void *p = dev->video_vbase;
-	const u16 *rgb = rgb555;
-	unsigned x, y;
-
-	if (dev->fb_defined.green.length == 6)
-		rgb = rgb565;
-
-	for (y = 0; y < dev->display_height; y++) {
-		u16 *d = p;
-
-		for (x = 0; x < dev->display_width; x++)
-			d[x] = rgb[(y / 16 + x / 16) % 16];
-		p += dev->display_byte_stride;
-	}
-}
-
-/* --------------------------------------------------------------------- */
-
-static int vivid_fb_ioctl(struct fb_info *info, unsigned cmd, unsigned long arg)
-{
-	struct vivid_dev *dev = (struct vivid_dev *)info->par;
-
-	switch (cmd) {
-	case FBIOGET_VBLANK: {
-		struct fb_vblank vblank;
-
-		memset(&vblank, 0, sizeof(vblank));
-		vblank.flags = FB_VBLANK_HAVE_COUNT | FB_VBLANK_HAVE_VCOUNT |
-			FB_VBLANK_HAVE_VSYNC;
-		vblank.count = 0;
-		vblank.vcount = 0;
-		vblank.hcount = 0;
-		if (copy_to_user((void __user *)arg, &vblank, sizeof(vblank)))
-			return -EFAULT;
-		return 0;
-	}
-
-	default:
-		dprintk(dev, 1, "Unknown ioctl %08x\n", cmd);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/* Framebuffer device handling */
-
-static int vivid_fb_set_var(struct vivid_dev *dev, struct fb_var_screeninfo *var)
-{
-	dprintk(dev, 1, "vivid_fb_set_var\n");
-
-	if (var->bits_per_pixel != 16) {
-		dprintk(dev, 1, "vivid_fb_set_var - Invalid bpp\n");
-		return -EINVAL;
-	}
-	dev->display_byte_stride = var->xres * dev->bytes_per_pixel;
-
-	return 0;
-}
-
-static int vivid_fb_get_fix(struct vivid_dev *dev, struct fb_fix_screeninfo *fix)
-{
-	dprintk(dev, 1, "vivid_fb_get_fix\n");
-	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
-	strscpy(fix->id, "vioverlay fb", sizeof(fix->id));
-	fix->smem_start = dev->video_pbase;
-	fix->smem_len = dev->video_buffer_size;
-	fix->type = FB_TYPE_PACKED_PIXELS;
-	fix->visual = FB_VISUAL_TRUECOLOR;
-	fix->xpanstep = 1;
-	fix->ypanstep = 1;
-	fix->ywrapstep = 0;
-	fix->line_length = dev->display_byte_stride;
-	fix->accel = FB_ACCEL_NONE;
-	return 0;
-}
-
-/* Check the requested display mode, returning -EINVAL if we can't
-   handle it. */
-
-static int _vivid_fb_check_var(struct fb_var_screeninfo *var, struct vivid_dev *dev)
-{
-	dprintk(dev, 1, "vivid_fb_check_var\n");
-
-	var->bits_per_pixel = 16;
-	if (var->green.length == 5) {
-		var->red.offset = 10;
-		var->red.length = 5;
-		var->green.offset = 5;
-		var->green.length = 5;
-		var->blue.offset = 0;
-		var->blue.length = 5;
-		var->transp.offset = 15;
-		var->transp.length = 1;
-	} else {
-		var->red.offset = 11;
-		var->red.length = 5;
-		var->green.offset = 5;
-		var->green.length = 6;
-		var->blue.offset = 0;
-		var->blue.length = 5;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-	}
-	var->xoffset = var->yoffset = 0;
-	var->left_margin = var->upper_margin = 0;
-	var->nonstd = 0;
-
-	var->vmode &= ~FB_VMODE_MASK;
-	var->vmode |= FB_VMODE_NONINTERLACED;
-
-	/* Dummy values */
-	var->hsync_len = 24;
-	var->vsync_len = 2;
-	var->pixclock = 84316;
-	var->right_margin = 776;
-	var->lower_margin = 591;
-	return 0;
-}
-
-static int vivid_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-{
-	struct vivid_dev *dev = (struct vivid_dev *) info->par;
-
-	dprintk(dev, 1, "vivid_fb_check_var\n");
-	return _vivid_fb_check_var(var, dev);
-}
-
-static int vivid_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
-{
-	return 0;
-}
-
-static int vivid_fb_set_par(struct fb_info *info)
-{
-	int rc = 0;
-	struct vivid_dev *dev = (struct vivid_dev *) info->par;
-
-	dprintk(dev, 1, "vivid_fb_set_par\n");
-
-	rc = vivid_fb_set_var(dev, &info->var);
-	vivid_fb_get_fix(dev, &info->fix);
-	return rc;
-}
-
-static int vivid_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
-				unsigned blue, unsigned transp,
-				struct fb_info *info)
-{
-	u32 color, *palette;
-
-	if (regno >= info->cmap.len)
-		return -EINVAL;
-
-	color = ((transp & 0xFF00) << 16) | ((red & 0xFF00) << 8) |
-		 (green & 0xFF00) | ((blue & 0xFF00) >> 8);
-	if (regno >= 16)
-		return -EINVAL;
-
-	palette = info->pseudo_palette;
-	if (info->var.bits_per_pixel == 16) {
-		switch (info->var.green.length) {
-		case 6:
-			color = (red & 0xf800) |
-				((green & 0xfc00) >> 5) |
-				((blue & 0xf800) >> 11);
-			break;
-		case 5:
-			color = ((red & 0xf800) >> 1) |
-				((green & 0xf800) >> 6) |
-				((blue & 0xf800) >> 11) |
-				(transp ? 0x8000 : 0);
-			break;
-		}
-	}
-	palette[regno] = color;
-	return 0;
-}
-
-/* We don't really support blanking. All this does is enable or
-   disable the OSD. */
-static int vivid_fb_blank(int blank_mode, struct fb_info *info)
-{
-	struct vivid_dev *dev = (struct vivid_dev *)info->par;
-
-	dprintk(dev, 1, "Set blanking mode : %d\n", blank_mode);
-	switch (blank_mode) {
-	case FB_BLANK_UNBLANK:
-		break;
-	case FB_BLANK_NORMAL:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_POWERDOWN:
-		break;
-	}
-	return 0;
-}
-
-static const struct fb_ops vivid_fb_ops = {
-	.owner = THIS_MODULE,
-	.fb_check_var   = vivid_fb_check_var,
-	.fb_set_par     = vivid_fb_set_par,
-	.fb_setcolreg   = vivid_fb_setcolreg,
-	.fb_fillrect    = cfb_fillrect,
-	.fb_copyarea    = cfb_copyarea,
-	.fb_imageblit   = cfb_imageblit,
-	.fb_cursor      = NULL,
-	.fb_ioctl       = vivid_fb_ioctl,
-	.fb_pan_display = vivid_fb_pan_display,
-	.fb_blank       = vivid_fb_blank,
-};
-
-/* Initialization */
-
-
-/* Setup our initial video mode */
-static int vivid_fb_init_vidmode(struct vivid_dev *dev)
-{
-	struct v4l2_rect start_window;
-
-	/* Color mode */
-
-	dev->bits_per_pixel = 16;
-	dev->bytes_per_pixel = dev->bits_per_pixel / 8;
-
-	start_window.width = MAX_OSD_WIDTH;
-	start_window.left = 0;
-
-	dev->display_byte_stride = start_window.width * dev->bytes_per_pixel;
-
-	/* Vertical size & position */
-
-	start_window.height = MAX_OSD_HEIGHT;
-	start_window.top = 0;
-
-	dev->display_width = start_window.width;
-	dev->display_height = start_window.height;
-
-	/* Generate a valid fb_var_screeninfo */
-
-	dev->fb_defined.xres = dev->display_width;
-	dev->fb_defined.yres = dev->display_height;
-	dev->fb_defined.xres_virtual = dev->display_width;
-	dev->fb_defined.yres_virtual = dev->display_height;
-	dev->fb_defined.bits_per_pixel = dev->bits_per_pixel;
-	dev->fb_defined.vmode = FB_VMODE_NONINTERLACED;
-	dev->fb_defined.left_margin = start_window.left + 1;
-	dev->fb_defined.upper_margin = start_window.top + 1;
-	dev->fb_defined.accel_flags = FB_ACCEL_NONE;
-	dev->fb_defined.nonstd = 0;
-	/* set default to 1:5:5:5 */
-	dev->fb_defined.green.length = 5;
-
-	/* We've filled in the most data, let the usual mode check
-	   routine fill in the rest. */
-	_vivid_fb_check_var(&dev->fb_defined, dev);
-
-	/* Generate valid fb_fix_screeninfo */
-
-	vivid_fb_get_fix(dev, &dev->fb_fix);
-
-	/* Generate valid fb_info */
-
-	dev->fb_info.node = -1;
-	dev->fb_info.flags = FBINFO_FLAG_DEFAULT;
-	dev->fb_info.par = dev;
-	dev->fb_info.var = dev->fb_defined;
-	dev->fb_info.fix = dev->fb_fix;
-	dev->fb_info.screen_base = (u8 __iomem *)dev->video_vbase;
-	dev->fb_info.fbops = &vivid_fb_ops;
-
-	/* Supply some monitor specs. Bogus values will do for now */
-	dev->fb_info.monspecs.hfmin = 8000;
-	dev->fb_info.monspecs.hfmax = 70000;
-	dev->fb_info.monspecs.vfmin = 10;
-	dev->fb_info.monspecs.vfmax = 100;
-
-	/* Allocate color map */
-	if (fb_alloc_cmap(&dev->fb_info.cmap, 256, 1)) {
-		pr_err("abort, unable to alloc cmap\n");
-		return -ENOMEM;
-	}
-
-	/* Allocate the pseudo palette */
-	dev->fb_info.pseudo_palette = kmalloc_array(16, sizeof(u32), GFP_KERNEL);
-
-	return dev->fb_info.pseudo_palette ? 0 : -ENOMEM;
-}
-
-/* Release any memory we've grabbed */
-void vivid_fb_release_buffers(struct vivid_dev *dev)
-{
-	if (dev->video_vbase == NULL)
-		return;
-
-	/* Release cmap */
-	if (dev->fb_info.cmap.len)
-		fb_dealloc_cmap(&dev->fb_info.cmap);
-
-	/* Release pseudo palette */
-	kfree(dev->fb_info.pseudo_palette);
-	kfree(dev->video_vbase);
-}
-
-/* Initialize the specified card */
-
-int vivid_fb_init(struct vivid_dev *dev)
-{
-	int ret;
-
-	dev->video_buffer_size = MAX_OSD_HEIGHT * MAX_OSD_WIDTH * 2;
-	dev->video_vbase = kzalloc(dev->video_buffer_size, GFP_KERNEL | GFP_DMA32);
-	if (dev->video_vbase == NULL)
-		return -ENOMEM;
-	dev->video_pbase = virt_to_phys(dev->video_vbase);
-
-	pr_info("Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n",
-			dev->video_pbase, dev->video_vbase,
-			dev->video_buffer_size / 1024);
-
-	/* Set the startup video mode information */
-	ret = vivid_fb_init_vidmode(dev);
-	if (ret) {
-		vivid_fb_release_buffers(dev);
-		return ret;
-	}
-
-	vivid_clear_fb(dev);
-
-	/* Register the framebuffer */
-	if (register_framebuffer(&dev->fb_info) < 0) {
-		vivid_fb_release_buffers(dev);
-		return -EINVAL;
-	}
-
-	/* Set the card to the requested mode */
-	vivid_fb_set_par(&dev->fb_info);
-	return 0;
-
-}
diff --git a/drivers/media/platform/vivid/vivid-osd.h b/drivers/media/platform/vivid/vivid-osd.h
deleted file mode 100644
index f9ac1af25dd3..000000000000
--- a/drivers/media/platform/vivid/vivid-osd.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-osd.h - output overlay support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_OSD_H_
-#define _VIVID_OSD_H_
-
-int vivid_fb_init(struct vivid_dev *dev);
-void vivid_fb_release_buffers(struct vivid_dev *dev);
-void vivid_clear_fb(struct vivid_dev *dev);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-radio-common.c b/drivers/media/platform/vivid/vivid-radio-common.c
deleted file mode 100644
index 138c7bce68b1..000000000000
--- a/drivers/media/platform/vivid/vivid-radio-common.c
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-radio-common.c - common radio rx/tx support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-
-#include "vivid-core.h"
-#include "vivid-ctrls.h"
-#include "vivid-radio-common.h"
-#include "vivid-rds-gen.h"
-
-/*
- * These functions are shared between the vivid receiver and transmitter
- * since both use the same frequency bands.
- */
-
-const struct v4l2_frequency_band vivid_radio_bands[TOT_BANDS] = {
-	/* Band FM */
-	{
-		.type = V4L2_TUNER_RADIO,
-		.index = 0,
-		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
-			      V4L2_TUNER_CAP_FREQ_BANDS,
-		.rangelow   = FM_FREQ_RANGE_LOW,
-		.rangehigh  = FM_FREQ_RANGE_HIGH,
-		.modulation = V4L2_BAND_MODULATION_FM,
-	},
-	/* Band AM */
-	{
-		.type = V4L2_TUNER_RADIO,
-		.index = 1,
-		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
-		.rangelow   = AM_FREQ_RANGE_LOW,
-		.rangehigh  = AM_FREQ_RANGE_HIGH,
-		.modulation = V4L2_BAND_MODULATION_AM,
-	},
-	/* Band SW */
-	{
-		.type = V4L2_TUNER_RADIO,
-		.index = 2,
-		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
-		.rangelow   = SW_FREQ_RANGE_LOW,
-		.rangehigh  = SW_FREQ_RANGE_HIGH,
-		.modulation = V4L2_BAND_MODULATION_AM,
-	},
-};
-
-/*
- * Initialize the RDS generator. If we can loop, then the RDS generator
- * is set up with the values from the RDS TX controls, otherwise it
- * will fill in standard values using one of two alternates.
- */
-void vivid_radio_rds_init(struct vivid_dev *dev)
-{
-	struct vivid_rds_gen *rds = &dev->rds_gen;
-	bool alt = dev->radio_rx_rds_use_alternates;
-
-	/* Do nothing, blocks will be filled by the transmitter */
-	if (dev->radio_rds_loop && !dev->radio_tx_rds_controls)
-		return;
-
-	if (dev->radio_rds_loop) {
-		v4l2_ctrl_lock(dev->radio_tx_rds_pi);
-		rds->picode = dev->radio_tx_rds_pi->cur.val;
-		rds->pty = dev->radio_tx_rds_pty->cur.val;
-		rds->mono_stereo = dev->radio_tx_rds_mono_stereo->cur.val;
-		rds->art_head = dev->radio_tx_rds_art_head->cur.val;
-		rds->compressed = dev->radio_tx_rds_compressed->cur.val;
-		rds->dyn_pty = dev->radio_tx_rds_dyn_pty->cur.val;
-		rds->ta = dev->radio_tx_rds_ta->cur.val;
-		rds->tp = dev->radio_tx_rds_tp->cur.val;
-		rds->ms = dev->radio_tx_rds_ms->cur.val;
-		strscpy(rds->psname,
-			dev->radio_tx_rds_psname->p_cur.p_char,
-			sizeof(rds->psname));
-		strscpy(rds->radiotext,
-			dev->radio_tx_rds_radiotext->p_cur.p_char + alt * 64,
-			sizeof(rds->radiotext));
-		v4l2_ctrl_unlock(dev->radio_tx_rds_pi);
-	} else {
-		vivid_rds_gen_fill(rds, dev->radio_rx_freq, alt);
-	}
-	if (dev->radio_rx_rds_controls) {
-		v4l2_ctrl_s_ctrl(dev->radio_rx_rds_pty, rds->pty);
-		v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ta, rds->ta);
-		v4l2_ctrl_s_ctrl(dev->radio_rx_rds_tp, rds->tp);
-		v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ms, rds->ms);
-		v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_psname, rds->psname);
-		v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_radiotext, rds->radiotext);
-		if (!dev->radio_rds_loop)
-			dev->radio_rx_rds_use_alternates = !dev->radio_rx_rds_use_alternates;
-	}
-	vivid_rds_generate(rds);
-}
-
-/*
- * Calculate the emulated signal quality taking into account the frequency
- * the transmitter is using.
- */
-static void vivid_radio_calc_sig_qual(struct vivid_dev *dev)
-{
-	int mod = 16000;
-	int delta = 800;
-	int sig_qual, sig_qual_tx = mod;
-
-	/*
-	 * For SW and FM there is a channel every 1000 kHz, for AM there is one
-	 * every 100 kHz.
-	 */
-	if (dev->radio_rx_freq <= AM_FREQ_RANGE_HIGH) {
-		mod /= 10;
-		delta /= 10;
-	}
-	sig_qual = (dev->radio_rx_freq + delta) % mod - delta;
-	if (dev->has_radio_tx)
-		sig_qual_tx = dev->radio_rx_freq - dev->radio_tx_freq;
-	if (abs(sig_qual_tx) <= abs(sig_qual)) {
-		sig_qual = sig_qual_tx;
-		/*
-		 * Zero the internal rds buffer if we are going to loop
-		 * rds blocks.
-		 */
-		if (!dev->radio_rds_loop && !dev->radio_tx_rds_controls)
-			memset(dev->rds_gen.data, 0,
-			       sizeof(dev->rds_gen.data));
-		dev->radio_rds_loop = dev->radio_rx_freq >= FM_FREQ_RANGE_LOW;
-	} else {
-		dev->radio_rds_loop = false;
-	}
-	if (dev->radio_rx_freq <= AM_FREQ_RANGE_HIGH)
-		sig_qual *= 10;
-	dev->radio_rx_sig_qual = sig_qual;
-}
-
-int vivid_radio_g_frequency(struct file *file, const unsigned *pfreq, struct v4l2_frequency *vf)
-{
-	if (vf->tuner != 0)
-		return -EINVAL;
-	vf->frequency = *pfreq;
-	return 0;
-}
-
-int vivid_radio_s_frequency(struct file *file, unsigned *pfreq, const struct v4l2_frequency *vf)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	unsigned freq;
-	unsigned band;
-
-	if (vf->tuner != 0)
-		return -EINVAL;
-
-	if (vf->frequency >= (FM_FREQ_RANGE_LOW + SW_FREQ_RANGE_HIGH) / 2)
-		band = BAND_FM;
-	else if (vf->frequency <= (AM_FREQ_RANGE_HIGH + SW_FREQ_RANGE_LOW) / 2)
-		band = BAND_AM;
-	else
-		band = BAND_SW;
-
-	freq = clamp_t(u32, vf->frequency, vivid_radio_bands[band].rangelow,
-					   vivid_radio_bands[band].rangehigh);
-	*pfreq = freq;
-
-	/*
-	 * For both receiver and transmitter recalculate the signal quality
-	 * (since that depends on both frequencies) and re-init the rds
-	 * generator.
-	 */
-	vivid_radio_calc_sig_qual(dev);
-	vivid_radio_rds_init(dev);
-	return 0;
-}
diff --git a/drivers/media/platform/vivid/vivid-radio-common.h b/drivers/media/platform/vivid/vivid-radio-common.h
deleted file mode 100644
index 30a9900e5b2b..000000000000
--- a/drivers/media/platform/vivid/vivid-radio-common.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-radio-common.h - common radio rx/tx support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_RADIO_COMMON_H_
-#define _VIVID_RADIO_COMMON_H_
-
-/* The supported radio frequency ranges in kHz */
-#define FM_FREQ_RANGE_LOW       (64000U * 16U)
-#define FM_FREQ_RANGE_HIGH      (108000U * 16U)
-#define AM_FREQ_RANGE_LOW       (520U * 16U)
-#define AM_FREQ_RANGE_HIGH      (1710U * 16U)
-#define SW_FREQ_RANGE_LOW       (2300U * 16U)
-#define SW_FREQ_RANGE_HIGH      (26100U * 16U)
-
-enum { BAND_FM, BAND_AM, BAND_SW, TOT_BANDS };
-
-extern const struct v4l2_frequency_band vivid_radio_bands[TOT_BANDS];
-
-int vivid_radio_g_frequency(struct file *file, const unsigned *freq, struct v4l2_frequency *vf);
-int vivid_radio_s_frequency(struct file *file, unsigned *freq, const struct v4l2_frequency *vf);
-
-void vivid_radio_rds_init(struct vivid_dev *dev);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-radio-rx.c b/drivers/media/platform/vivid/vivid-radio-rx.c
deleted file mode 100644
index 232cab508f48..000000000000
--- a/drivers/media/platform/vivid/vivid-radio-rx.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-radio-rx.c - radio receiver support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <linux/sched/signal.h>
-
-#include <media/v4l2-common.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-dv-timings.h>
-
-#include "vivid-core.h"
-#include "vivid-ctrls.h"
-#include "vivid-radio-common.h"
-#include "vivid-rds-gen.h"
-#include "vivid-radio-rx.h"
-
-ssize_t vivid_radio_rx_read(struct file *file, char __user *buf,
-			 size_t size, loff_t *offset)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_rds_data *data = dev->rds_gen.data;
-	bool use_alternates;
-	ktime_t timestamp;
-	unsigned blk;
-	int perc;
-	int i;
-
-	if (dev->radio_rx_rds_controls)
-		return -EINVAL;
-	if (size < sizeof(*data))
-		return 0;
-	size = sizeof(*data) * (size / sizeof(*data));
-
-	if (mutex_lock_interruptible(&dev->mutex))
-		return -ERESTARTSYS;
-	if (dev->radio_rx_rds_owner &&
-	    file->private_data != dev->radio_rx_rds_owner) {
-		mutex_unlock(&dev->mutex);
-		return -EBUSY;
-	}
-	if (dev->radio_rx_rds_owner == NULL) {
-		vivid_radio_rds_init(dev);
-		dev->radio_rx_rds_owner = file->private_data;
-	}
-
-retry:
-	timestamp = ktime_sub(ktime_get(), dev->radio_rds_init_time);
-	blk = ktime_divns(timestamp, VIVID_RDS_NSEC_PER_BLK);
-	use_alternates = (blk % VIVID_RDS_GEN_BLOCKS) & 1;
-
-	if (dev->radio_rx_rds_last_block == 0 ||
-	    dev->radio_rx_rds_use_alternates != use_alternates) {
-		dev->radio_rx_rds_use_alternates = use_alternates;
-		/* Re-init the RDS generator */
-		vivid_radio_rds_init(dev);
-	}
-	if (blk >= dev->radio_rx_rds_last_block + VIVID_RDS_GEN_BLOCKS)
-		dev->radio_rx_rds_last_block = blk - VIVID_RDS_GEN_BLOCKS + 1;
-
-	/*
-	 * No data is available if there hasn't been time to get new data,
-	 * or if the RDS receiver has been disabled, or if we use the data
-	 * from the RDS transmitter and that RDS transmitter has been disabled,
-	 * or if the signal quality is too weak.
-	 */
-	if (blk == dev->radio_rx_rds_last_block || !dev->radio_rx_rds_enabled ||
-	    (dev->radio_rds_loop && !(dev->radio_tx_subchans & V4L2_TUNER_SUB_RDS)) ||
-	    abs(dev->radio_rx_sig_qual) > 200) {
-		mutex_unlock(&dev->mutex);
-		if (file->f_flags & O_NONBLOCK)
-			return -EWOULDBLOCK;
-		if (msleep_interruptible(20) && signal_pending(current))
-			return -EINTR;
-		if (mutex_lock_interruptible(&dev->mutex))
-			return -ERESTARTSYS;
-		goto retry;
-	}
-
-	/* abs(dev->radio_rx_sig_qual) <= 200, map that to a 0-50% range */
-	perc = abs(dev->radio_rx_sig_qual) / 4;
-
-	for (i = 0; i < size && blk > dev->radio_rx_rds_last_block;
-			dev->radio_rx_rds_last_block++) {
-		unsigned data_blk = dev->radio_rx_rds_last_block % VIVID_RDS_GEN_BLOCKS;
-		struct v4l2_rds_data rds = data[data_blk];
-
-		if (data_blk == 0 && dev->radio_rds_loop)
-			vivid_radio_rds_init(dev);
-		if (perc && prandom_u32_max(100) < perc) {
-			switch (prandom_u32_max(4)) {
-			case 0:
-				rds.block |= V4L2_RDS_BLOCK_CORRECTED;
-				break;
-			case 1:
-				rds.block |= V4L2_RDS_BLOCK_INVALID;
-				break;
-			case 2:
-				rds.block |= V4L2_RDS_BLOCK_ERROR;
-				rds.lsb = prandom_u32_max(256);
-				rds.msb = prandom_u32_max(256);
-				break;
-			case 3: /* Skip block altogether */
-				if (i)
-					continue;
-				/*
-				 * Must make sure at least one block is
-				 * returned, otherwise the application
-				 * might think that end-of-file occurred.
-				 */
-				break;
-			}
-		}
-		if (copy_to_user(buf + i, &rds, sizeof(rds))) {
-			i = -EFAULT;
-			break;
-		}
-		i += sizeof(rds);
-	}
-	mutex_unlock(&dev->mutex);
-	return i;
-}
-
-__poll_t vivid_radio_rx_poll(struct file *file, struct poll_table_struct *wait)
-{
-	return EPOLLIN | EPOLLRDNORM | v4l2_ctrl_poll(file, wait);
-}
-
-int vivid_radio_rx_enum_freq_bands(struct file *file, void *fh, struct v4l2_frequency_band *band)
-{
-	if (band->tuner != 0)
-		return -EINVAL;
-
-	if (band->index >= TOT_BANDS)
-		return -EINVAL;
-
-	*band = vivid_radio_bands[band->index];
-	return 0;
-}
-
-int vivid_radio_rx_s_hw_freq_seek(struct file *file, void *fh, const struct v4l2_hw_freq_seek *a)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	unsigned low, high;
-	unsigned freq;
-	unsigned spacing;
-	unsigned band;
-
-	if (a->tuner)
-		return -EINVAL;
-	if (a->wrap_around && dev->radio_rx_hw_seek_mode == VIVID_HW_SEEK_BOUNDED)
-		return -EINVAL;
-
-	if (!a->wrap_around && dev->radio_rx_hw_seek_mode == VIVID_HW_SEEK_WRAP)
-		return -EINVAL;
-	if (!a->rangelow ^ !a->rangehigh)
-		return -EINVAL;
-
-	if (file->f_flags & O_NONBLOCK)
-		return -EWOULDBLOCK;
-
-	if (a->rangelow) {
-		for (band = 0; band < TOT_BANDS; band++)
-			if (a->rangelow >= vivid_radio_bands[band].rangelow &&
-			    a->rangehigh <= vivid_radio_bands[band].rangehigh)
-				break;
-		if (band == TOT_BANDS)
-			return -EINVAL;
-		if (!dev->radio_rx_hw_seek_prog_lim &&
-		    (a->rangelow != vivid_radio_bands[band].rangelow ||
-		     a->rangehigh != vivid_radio_bands[band].rangehigh))
-			return -EINVAL;
-		low = a->rangelow;
-		high = a->rangehigh;
-	} else {
-		for (band = 0; band < TOT_BANDS; band++)
-			if (dev->radio_rx_freq >= vivid_radio_bands[band].rangelow &&
-			    dev->radio_rx_freq <= vivid_radio_bands[band].rangehigh)
-				break;
-		if (band == TOT_BANDS)
-			return -EINVAL;
-		low = vivid_radio_bands[band].rangelow;
-		high = vivid_radio_bands[band].rangehigh;
-	}
-	spacing = band == BAND_AM ? 1600 : 16000;
-	freq = clamp(dev->radio_rx_freq, low, high);
-
-	if (a->seek_upward) {
-		freq = spacing * (freq / spacing) + spacing;
-		if (freq > high) {
-			if (!a->wrap_around)
-				return -ENODATA;
-			freq = spacing * (low / spacing) + spacing;
-			if (freq >= dev->radio_rx_freq)
-				return -ENODATA;
-		}
-	} else {
-		freq = spacing * ((freq + spacing - 1) / spacing) - spacing;
-		if (freq < low) {
-			if (!a->wrap_around)
-				return -ENODATA;
-			freq = spacing * ((high + spacing - 1) / spacing) - spacing;
-			if (freq <= dev->radio_rx_freq)
-				return -ENODATA;
-		}
-	}
-	return 0;
-}
-
-int vivid_radio_rx_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	int delta = 800;
-	int sig_qual;
-
-	if (vt->index > 0)
-		return -EINVAL;
-
-	strscpy(vt->name, "AM/FM/SW Receiver", sizeof(vt->name));
-	vt->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
-			 V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_RDS |
-			 (dev->radio_rx_rds_controls ?
-				V4L2_TUNER_CAP_RDS_CONTROLS :
-				V4L2_TUNER_CAP_RDS_BLOCK_IO) |
-			 (dev->radio_rx_hw_seek_prog_lim ?
-				V4L2_TUNER_CAP_HWSEEK_PROG_LIM : 0);
-	switch (dev->radio_rx_hw_seek_mode) {
-	case VIVID_HW_SEEK_BOUNDED:
-		vt->capability |= V4L2_TUNER_CAP_HWSEEK_BOUNDED;
-		break;
-	case VIVID_HW_SEEK_WRAP:
-		vt->capability |= V4L2_TUNER_CAP_HWSEEK_WRAP;
-		break;
-	case VIVID_HW_SEEK_BOTH:
-		vt->capability |= V4L2_TUNER_CAP_HWSEEK_WRAP |
-				  V4L2_TUNER_CAP_HWSEEK_BOUNDED;
-		break;
-	}
-	vt->rangelow = AM_FREQ_RANGE_LOW;
-	vt->rangehigh = FM_FREQ_RANGE_HIGH;
-	sig_qual = dev->radio_rx_sig_qual;
-	vt->signal = abs(sig_qual) > delta ? 0 :
-		     0xffff - ((unsigned)abs(sig_qual) * 0xffff) / delta;
-	vt->afc = sig_qual > delta ? 0 : sig_qual;
-	if (abs(sig_qual) > delta)
-		vt->rxsubchans = 0;
-	else if (dev->radio_rx_freq < FM_FREQ_RANGE_LOW || vt->signal < 0x8000)
-		vt->rxsubchans = V4L2_TUNER_SUB_MONO;
-	else if (dev->radio_rds_loop && !(dev->radio_tx_subchans & V4L2_TUNER_SUB_STEREO))
-		vt->rxsubchans = V4L2_TUNER_SUB_MONO;
-	else
-		vt->rxsubchans = V4L2_TUNER_SUB_STEREO;
-	if (dev->radio_rx_rds_enabled &&
-	    (!dev->radio_rds_loop || (dev->radio_tx_subchans & V4L2_TUNER_SUB_RDS)) &&
-	    dev->radio_rx_freq >= FM_FREQ_RANGE_LOW && vt->signal >= 0xc000)
-		vt->rxsubchans |= V4L2_TUNER_SUB_RDS;
-	if (dev->radio_rx_rds_controls)
-		vivid_radio_rds_init(dev);
-	vt->audmode = dev->radio_rx_audmode;
-	return 0;
-}
-
-int vivid_radio_rx_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (vt->index)
-		return -EINVAL;
-	dev->radio_rx_audmode = vt->audmode >= V4L2_TUNER_MODE_STEREO;
-	return 0;
-}
diff --git a/drivers/media/platform/vivid/vivid-radio-rx.h b/drivers/media/platform/vivid/vivid-radio-rx.h
deleted file mode 100644
index c9c7849f6f99..000000000000
--- a/drivers/media/platform/vivid/vivid-radio-rx.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-radio-rx.h - radio receiver support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_RADIO_RX_H_
-#define _VIVID_RADIO_RX_H_
-
-ssize_t vivid_radio_rx_read(struct file *, char __user *, size_t, loff_t *);
-__poll_t vivid_radio_rx_poll(struct file *file, struct poll_table_struct *wait);
-
-int vivid_radio_rx_enum_freq_bands(struct file *file, void *fh, struct v4l2_frequency_band *band);
-int vivid_radio_rx_s_hw_freq_seek(struct file *file, void *fh, const struct v4l2_hw_freq_seek *a);
-int vivid_radio_rx_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt);
-int vivid_radio_rx_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-radio-tx.c b/drivers/media/platform/vivid/vivid-radio-tx.c
deleted file mode 100644
index 049d40b948bb..000000000000
--- a/drivers/media/platform/vivid/vivid-radio-tx.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-radio-tx.c - radio transmitter support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/sched/signal.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-dv-timings.h>
-
-#include "vivid-core.h"
-#include "vivid-ctrls.h"
-#include "vivid-radio-common.h"
-#include "vivid-radio-tx.h"
-
-ssize_t vivid_radio_tx_write(struct file *file, const char __user *buf,
-			  size_t size, loff_t *offset)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_rds_data *data = dev->rds_gen.data;
-	ktime_t timestamp;
-	unsigned blk;
-	int i;
-
-	if (dev->radio_tx_rds_controls)
-		return -EINVAL;
-
-	if (size < sizeof(*data))
-		return -EINVAL;
-	size = sizeof(*data) * (size / sizeof(*data));
-
-	if (mutex_lock_interruptible(&dev->mutex))
-		return -ERESTARTSYS;
-	if (dev->radio_tx_rds_owner &&
-	    file->private_data != dev->radio_tx_rds_owner) {
-		mutex_unlock(&dev->mutex);
-		return -EBUSY;
-	}
-	dev->radio_tx_rds_owner = file->private_data;
-
-retry:
-	timestamp = ktime_sub(ktime_get(), dev->radio_rds_init_time);
-	blk = ktime_divns(timestamp, VIVID_RDS_NSEC_PER_BLK);
-	if (blk - VIVID_RDS_GEN_BLOCKS >= dev->radio_tx_rds_last_block)
-		dev->radio_tx_rds_last_block = blk - VIVID_RDS_GEN_BLOCKS + 1;
-
-	/*
-	 * No data is available if there hasn't been time to get new data,
-	 * or if the RDS receiver has been disabled, or if we use the data
-	 * from the RDS transmitter and that RDS transmitter has been disabled,
-	 * or if the signal quality is too weak.
-	 */
-	if (blk == dev->radio_tx_rds_last_block ||
-	    !(dev->radio_tx_subchans & V4L2_TUNER_SUB_RDS)) {
-		mutex_unlock(&dev->mutex);
-		if (file->f_flags & O_NONBLOCK)
-			return -EWOULDBLOCK;
-		if (msleep_interruptible(20) && signal_pending(current))
-			return -EINTR;
-		if (mutex_lock_interruptible(&dev->mutex))
-			return -ERESTARTSYS;
-		goto retry;
-	}
-
-	for (i = 0; i < size && blk > dev->radio_tx_rds_last_block;
-			dev->radio_tx_rds_last_block++) {
-		unsigned data_blk = dev->radio_tx_rds_last_block % VIVID_RDS_GEN_BLOCKS;
-		struct v4l2_rds_data rds;
-
-		if (copy_from_user(&rds, buf + i, sizeof(rds))) {
-			i = -EFAULT;
-			break;
-		}
-		i += sizeof(rds);
-		if (!dev->radio_rds_loop)
-			continue;
-		if ((rds.block & V4L2_RDS_BLOCK_MSK) == V4L2_RDS_BLOCK_INVALID ||
-		    (rds.block & V4L2_RDS_BLOCK_ERROR))
-			continue;
-		rds.block &= V4L2_RDS_BLOCK_MSK;
-		data[data_blk] = rds;
-	}
-	mutex_unlock(&dev->mutex);
-	return i;
-}
-
-__poll_t vivid_radio_tx_poll(struct file *file, struct poll_table_struct *wait)
-{
-	return EPOLLOUT | EPOLLWRNORM | v4l2_ctrl_poll(file, wait);
-}
-
-int vidioc_g_modulator(struct file *file, void *fh, struct v4l2_modulator *a)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (a->index > 0)
-		return -EINVAL;
-
-	strscpy(a->name, "AM/FM/SW Transmitter", sizeof(a->name));
-	a->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
-			V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_RDS |
-			(dev->radio_tx_rds_controls ?
-				V4L2_TUNER_CAP_RDS_CONTROLS :
-				V4L2_TUNER_CAP_RDS_BLOCK_IO);
-	a->rangelow = AM_FREQ_RANGE_LOW;
-	a->rangehigh = FM_FREQ_RANGE_HIGH;
-	a->txsubchans = dev->radio_tx_subchans;
-	return 0;
-}
-
-int vidioc_s_modulator(struct file *file, void *fh, const struct v4l2_modulator *a)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (a->index)
-		return -EINVAL;
-	if (a->txsubchans & ~0x13)
-		return -EINVAL;
-	dev->radio_tx_subchans = a->txsubchans;
-	return 0;
-}
diff --git a/drivers/media/platform/vivid/vivid-radio-tx.h b/drivers/media/platform/vivid/vivid-radio-tx.h
deleted file mode 100644
index c2bf1e7e634a..000000000000
--- a/drivers/media/platform/vivid/vivid-radio-tx.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-radio-tx.h - radio transmitter support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_RADIO_TX_H_
-#define _VIVID_RADIO_TX_H_
-
-ssize_t vivid_radio_tx_write(struct file *, const char __user *, size_t, loff_t *);
-__poll_t vivid_radio_tx_poll(struct file *file, struct poll_table_struct *wait);
-
-int vidioc_g_modulator(struct file *file, void *fh, struct v4l2_modulator *a);
-int vidioc_s_modulator(struct file *file, void *fh, const struct v4l2_modulator *a);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-rds-gen.c b/drivers/media/platform/vivid/vivid-rds-gen.c
deleted file mode 100644
index b5b104ee64c9..000000000000
--- a/drivers/media/platform/vivid/vivid-rds-gen.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-rds-gen.c - rds (radio data system) generator support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/kernel.h>
-#include <linux/ktime.h>
-#include <linux/string.h>
-#include <linux/videodev2.h>
-
-#include "vivid-rds-gen.h"
-
-static u8 vivid_get_di(const struct vivid_rds_gen *rds, unsigned grp)
-{
-	switch (grp) {
-	case 0:
-		return (rds->dyn_pty << 2) | (grp & 3);
-	case 1:
-		return (rds->compressed << 2) | (grp & 3);
-	case 2:
-		return (rds->art_head << 2) | (grp & 3);
-	case 3:
-		return (rds->mono_stereo << 2) | (grp & 3);
-	}
-	return 0;
-}
-
-/*
- * This RDS generator creates 57 RDS groups (one group == four RDS blocks).
- * Groups 0-3, 22-25 and 44-47 (spaced 22 groups apart) are filled with a
- * standard 0B group containing the PI code and PS name.
- *
- * Groups 4-19 and 26-41 use group 2A for the radio text.
- *
- * Group 56 contains the time (group 4A).
- *
- * All remaining groups use a filler group 15B block that just repeats
- * the PI and PTY codes.
- */
-void vivid_rds_generate(struct vivid_rds_gen *rds)
-{
-	struct v4l2_rds_data *data = rds->data;
-	unsigned grp;
-	unsigned idx;
-	struct tm tm;
-	unsigned date;
-	unsigned time;
-	int l;
-
-	for (grp = 0; grp < VIVID_RDS_GEN_GROUPS; grp++, data += VIVID_RDS_GEN_BLKS_PER_GRP) {
-		data[0].lsb = rds->picode & 0xff;
-		data[0].msb = rds->picode >> 8;
-		data[0].block = V4L2_RDS_BLOCK_A | (V4L2_RDS_BLOCK_A << 3);
-		data[1].lsb = rds->pty << 5;
-		data[1].msb = (rds->pty >> 3) | (rds->tp << 2);
-		data[1].block = V4L2_RDS_BLOCK_B | (V4L2_RDS_BLOCK_B << 3);
-		data[3].block = V4L2_RDS_BLOCK_D | (V4L2_RDS_BLOCK_D << 3);
-
-		switch (grp) {
-		case 0 ... 3:
-		case 22 ... 25:
-		case 44 ... 47: /* Group 0B */
-			idx = (grp % 22) % 4;
-			data[1].lsb |= (rds->ta << 4) | (rds->ms << 3);
-			data[1].lsb |= vivid_get_di(rds, idx);
-			data[1].msb |= 1 << 3;
-			data[2].lsb = rds->picode & 0xff;
-			data[2].msb = rds->picode >> 8;
-			data[2].block = V4L2_RDS_BLOCK_C_ALT | (V4L2_RDS_BLOCK_C_ALT << 3);
-			data[3].lsb = rds->psname[2 * idx + 1];
-			data[3].msb = rds->psname[2 * idx];
-			break;
-		case 4 ... 19:
-		case 26 ... 41: /* Group 2A */
-			idx = ((grp - 4) % 22) % 16;
-			data[1].lsb |= idx;
-			data[1].msb |= 4 << 3;
-			data[2].msb = rds->radiotext[4 * idx];
-			data[2].lsb = rds->radiotext[4 * idx + 1];
-			data[2].block = V4L2_RDS_BLOCK_C | (V4L2_RDS_BLOCK_C << 3);
-			data[3].msb = rds->radiotext[4 * idx + 2];
-			data[3].lsb = rds->radiotext[4 * idx + 3];
-			break;
-		case 56:
-			/*
-			 * Group 4A
-			 *
-			 * Uses the algorithm from Annex G of the RDS standard
-			 * EN 50067:1998 to convert a UTC date to an RDS Modified
-			 * Julian Day.
-			 */
-			time64_to_tm(ktime_get_real_seconds(), 0, &tm);
-			l = tm.tm_mon <= 1;
-			date = 14956 + tm.tm_mday + ((tm.tm_year - l) * 1461) / 4 +
-				((tm.tm_mon + 2 + l * 12) * 306001) / 10000;
-			time = (tm.tm_hour << 12) |
-			       (tm.tm_min << 6) |
-			       (sys_tz.tz_minuteswest >= 0 ? 0x20 : 0) |
-			       (abs(sys_tz.tz_minuteswest) / 30);
-			data[1].lsb &= ~3;
-			data[1].lsb |= date >> 15;
-			data[1].msb |= 8 << 3;
-			data[2].lsb = (date << 1) & 0xfe;
-			data[2].lsb |= (time >> 16) & 1;
-			data[2].msb = (date >> 7) & 0xff;
-			data[2].block = V4L2_RDS_BLOCK_C | (V4L2_RDS_BLOCK_C << 3);
-			data[3].lsb = time & 0xff;
-			data[3].msb = (time >> 8) & 0xff;
-			break;
-		default: /* Group 15B */
-			data[1].lsb |= (rds->ta << 4) | (rds->ms << 3);
-			data[1].lsb |= vivid_get_di(rds, grp % 22);
-			data[1].msb |= 0x1f << 3;
-			data[2].lsb = rds->picode & 0xff;
-			data[2].msb = rds->picode >> 8;
-			data[2].block = V4L2_RDS_BLOCK_C_ALT | (V4L2_RDS_BLOCK_C_ALT << 3);
-			data[3].lsb = rds->pty << 5;
-			data[3].lsb |= (rds->ta << 4) | (rds->ms << 3);
-			data[3].lsb |= vivid_get_di(rds, grp % 22);
-			data[3].msb |= rds->pty >> 3;
-			data[3].msb |= 0x1f << 3;
-			break;
-		}
-	}
-}
-
-void vivid_rds_gen_fill(struct vivid_rds_gen *rds, unsigned freq,
-			  bool alt)
-{
-	/* Alternate PTY between Info and Weather */
-	if (rds->use_rbds) {
-		rds->picode = 0x2e75; /* 'KLNX' call sign */
-		rds->pty = alt ? 29 : 2;
-	} else {
-		rds->picode = 0x8088;
-		rds->pty = alt ? 16 : 3;
-	}
-	rds->mono_stereo = true;
-	rds->art_head = false;
-	rds->compressed = false;
-	rds->dyn_pty = false;
-	rds->tp = true;
-	rds->ta = alt;
-	rds->ms = true;
-	snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
-		 freq / 16, ((freq & 0xf) * 10) / 16);
-	if (alt)
-		strscpy(rds->radiotext,
-			" The Radio Data System can switch between different Radio Texts ",
-			sizeof(rds->radiotext));
-	else
-		strscpy(rds->radiotext,
-			"An example of Radio Text as transmitted by the Radio Data System",
-			sizeof(rds->radiotext));
-}
diff --git a/drivers/media/platform/vivid/vivid-rds-gen.h b/drivers/media/platform/vivid/vivid-rds-gen.h
deleted file mode 100644
index 35ac5742302b..000000000000
--- a/drivers/media/platform/vivid/vivid-rds-gen.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-rds-gen.h - rds (radio data system) generator support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_RDS_GEN_H_
-#define _VIVID_RDS_GEN_H_
-
-/*
- * It takes almost exactly 5 seconds to transmit 57 RDS groups.
- * Each group has 4 blocks and each block has a payload of 16 bits + a
- * block identification. The driver will generate the contents of these
- * 57 groups only when necessary and it will just be played continuously.
- */
-#define VIVID_RDS_GEN_GROUPS 57
-#define VIVID_RDS_GEN_BLKS_PER_GRP 4
-#define VIVID_RDS_GEN_BLOCKS (VIVID_RDS_GEN_BLKS_PER_GRP * VIVID_RDS_GEN_GROUPS)
-#define VIVID_RDS_NSEC_PER_BLK (u32)(5ull * NSEC_PER_SEC / VIVID_RDS_GEN_BLOCKS)
-
-struct vivid_rds_gen {
-	struct v4l2_rds_data	data[VIVID_RDS_GEN_BLOCKS];
-	bool			use_rbds;
-	u16			picode;
-	u8			pty;
-	bool			mono_stereo;
-	bool			art_head;
-	bool			compressed;
-	bool			dyn_pty;
-	bool			ta;
-	bool			tp;
-	bool			ms;
-	char			psname[8 + 1];
-	char			radiotext[64 + 1];
-};
-
-void vivid_rds_gen_fill(struct vivid_rds_gen *rds, unsigned freq,
-		    bool use_alternate);
-void vivid_rds_generate(struct vivid_rds_gen *rds);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-sdr-cap.c b/drivers/media/platform/vivid/vivid-sdr-cap.c
deleted file mode 100644
index 2b7522e16efc..000000000000
--- a/drivers/media/platform/vivid/vivid-sdr-cap.c
+++ /dev/null
@@ -1,570 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-sdr-cap.c - software defined radio support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/math64.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-dv-timings.h>
-#include <linux/fixp-arith.h>
-
-#include "vivid-core.h"
-#include "vivid-ctrls.h"
-#include "vivid-sdr-cap.h"
-
-/* stream formats */
-struct vivid_format {
-	u32	pixelformat;
-	u32	buffersize;
-};
-
-/* format descriptions for capture and preview */
-static const struct vivid_format formats[] = {
-	{
-		.pixelformat	= V4L2_SDR_FMT_CU8,
-		.buffersize	= SDR_CAP_SAMPLES_PER_BUF * 2,
-	}, {
-		.pixelformat	= V4L2_SDR_FMT_CS8,
-		.buffersize	= SDR_CAP_SAMPLES_PER_BUF * 2,
-	},
-};
-
-static const struct v4l2_frequency_band bands_adc[] = {
-	{
-		.tuner = 0,
-		.type = V4L2_TUNER_ADC,
-		.index = 0,
-		.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
-		.rangelow   =  300000,
-		.rangehigh  =  300000,
-	},
-	{
-		.tuner = 0,
-		.type = V4L2_TUNER_ADC,
-		.index = 1,
-		.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
-		.rangelow   =  900001,
-		.rangehigh  = 2800000,
-	},
-	{
-		.tuner = 0,
-		.type = V4L2_TUNER_ADC,
-		.index = 2,
-		.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
-		.rangelow   = 3200000,
-		.rangehigh  = 3200000,
-	},
-};
-
-/* ADC band midpoints */
-#define BAND_ADC_0 ((bands_adc[0].rangehigh + bands_adc[1].rangelow) / 2)
-#define BAND_ADC_1 ((bands_adc[1].rangehigh + bands_adc[2].rangelow) / 2)
-
-static const struct v4l2_frequency_band bands_fm[] = {
-	{
-		.tuner = 1,
-		.type = V4L2_TUNER_RF,
-		.index = 0,
-		.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
-		.rangelow   =    50000000,
-		.rangehigh  =  2000000000,
-	},
-};
-
-static void vivid_thread_sdr_cap_tick(struct vivid_dev *dev)
-{
-	struct vivid_buffer *sdr_cap_buf = NULL;
-
-	dprintk(dev, 1, "SDR Capture Thread Tick\n");
-
-	/* Drop a certain percentage of buffers. */
-	if (dev->perc_dropped_buffers &&
-	    prandom_u32_max(100) < dev->perc_dropped_buffers)
-		return;
-
-	spin_lock(&dev->slock);
-	if (!list_empty(&dev->sdr_cap_active)) {
-		sdr_cap_buf = list_entry(dev->sdr_cap_active.next,
-					 struct vivid_buffer, list);
-		list_del(&sdr_cap_buf->list);
-	}
-	spin_unlock(&dev->slock);
-
-	if (sdr_cap_buf) {
-		sdr_cap_buf->vb.sequence = dev->sdr_cap_seq_count;
-		v4l2_ctrl_request_setup(sdr_cap_buf->vb.vb2_buf.req_obj.req,
-					&dev->ctrl_hdl_sdr_cap);
-		v4l2_ctrl_request_complete(sdr_cap_buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_sdr_cap);
-		vivid_sdr_cap_process(dev, sdr_cap_buf);
-		sdr_cap_buf->vb.vb2_buf.timestamp =
-			ktime_get_ns() + dev->time_wrap_offset;
-		vb2_buffer_done(&sdr_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
-				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-		dev->dqbuf_error = false;
-	}
-}
-
-static int vivid_thread_sdr_cap(void *data)
-{
-	struct vivid_dev *dev = data;
-	u64 samples_since_start;
-	u64 buffers_since_start;
-	u64 next_jiffies_since_start;
-	unsigned long jiffies_since_start;
-	unsigned long cur_jiffies;
-	unsigned wait_jiffies;
-
-	dprintk(dev, 1, "SDR Capture Thread Start\n");
-
-	set_freezable();
-
-	/* Resets frame counters */
-	dev->sdr_cap_seq_offset = 0;
-	if (dev->seq_wrap)
-		dev->sdr_cap_seq_offset = 0xffffff80U;
-	dev->jiffies_sdr_cap = jiffies;
-	dev->sdr_cap_seq_resync = false;
-
-	for (;;) {
-		try_to_freeze();
-		if (kthread_should_stop())
-			break;
-
-		if (!mutex_trylock(&dev->mutex)) {
-			schedule_timeout_uninterruptible(1);
-			continue;
-		}
-
-		cur_jiffies = jiffies;
-		if (dev->sdr_cap_seq_resync) {
-			dev->jiffies_sdr_cap = cur_jiffies;
-			dev->sdr_cap_seq_offset = dev->sdr_cap_seq_count + 1;
-			dev->sdr_cap_seq_count = 0;
-			dev->sdr_cap_seq_resync = false;
-		}
-		/* Calculate the number of jiffies since we started streaming */
-		jiffies_since_start = cur_jiffies - dev->jiffies_sdr_cap;
-		/* Get the number of buffers streamed since the start */
-		buffers_since_start =
-			(u64)jiffies_since_start * dev->sdr_adc_freq +
-				      (HZ * SDR_CAP_SAMPLES_PER_BUF) / 2;
-		do_div(buffers_since_start, HZ * SDR_CAP_SAMPLES_PER_BUF);
-
-		/*
-		 * After more than 0xf0000000 (rounded down to a multiple of
-		 * 'jiffies-per-day' to ease jiffies_to_msecs calculation)
-		 * jiffies have passed since we started streaming reset the
-		 * counters and keep track of the sequence offset.
-		 */
-		if (jiffies_since_start > JIFFIES_RESYNC) {
-			dev->jiffies_sdr_cap = cur_jiffies;
-			dev->sdr_cap_seq_offset = buffers_since_start;
-			buffers_since_start = 0;
-		}
-		dev->sdr_cap_seq_count =
-			buffers_since_start + dev->sdr_cap_seq_offset;
-
-		vivid_thread_sdr_cap_tick(dev);
-		mutex_unlock(&dev->mutex);
-
-		/*
-		 * Calculate the number of samples streamed since we started,
-		 * not including the current buffer.
-		 */
-		samples_since_start = buffers_since_start * SDR_CAP_SAMPLES_PER_BUF;
-
-		/* And the number of jiffies since we started */
-		jiffies_since_start = jiffies - dev->jiffies_sdr_cap;
-
-		/* Increase by the number of samples in one buffer */
-		samples_since_start += SDR_CAP_SAMPLES_PER_BUF;
-		/*
-		 * Calculate when that next buffer is supposed to start
-		 * in jiffies since we started streaming.
-		 */
-		next_jiffies_since_start = samples_since_start * HZ +
-					   dev->sdr_adc_freq / 2;
-		do_div(next_jiffies_since_start, dev->sdr_adc_freq);
-		/* If it is in the past, then just schedule asap */
-		if (next_jiffies_since_start < jiffies_since_start)
-			next_jiffies_since_start = jiffies_since_start;
-
-		wait_jiffies = next_jiffies_since_start - jiffies_since_start;
-		schedule_timeout_interruptible(wait_jiffies ? wait_jiffies : 1);
-	}
-	dprintk(dev, 1, "SDR Capture Thread End\n");
-	return 0;
-}
-
-static int sdr_cap_queue_setup(struct vb2_queue *vq,
-		       unsigned *nbuffers, unsigned *nplanes,
-		       unsigned sizes[], struct device *alloc_devs[])
-{
-	/* 2 = max 16-bit sample returned */
-	sizes[0] = SDR_CAP_SAMPLES_PER_BUF * 2;
-	*nplanes = 1;
-	return 0;
-}
-
-static int sdr_cap_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	unsigned size = SDR_CAP_SAMPLES_PER_BUF * 2;
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->buf_prepare_error) {
-		/*
-		 * Error injection: test what happens if buf_prepare() returns
-		 * an error.
-		 */
-		dev->buf_prepare_error = false;
-		return -EINVAL;
-	}
-	if (vb2_plane_size(vb, 0) < size) {
-		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
-				__func__, vb2_plane_size(vb, 0), size);
-		return -EINVAL;
-	}
-	vb2_set_plane_payload(vb, 0, size);
-
-	return 0;
-}
-
-static void sdr_cap_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	spin_lock(&dev->slock);
-	list_add_tail(&buf->list, &dev->sdr_cap_active);
-	spin_unlock(&dev->slock);
-}
-
-static int sdr_cap_start_streaming(struct vb2_queue *vq, unsigned count)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	int err = 0;
-
-	dprintk(dev, 1, "%s\n", __func__);
-	dev->sdr_cap_seq_count = 0;
-	if (dev->start_streaming_error) {
-		dev->start_streaming_error = false;
-		err = -EINVAL;
-	} else if (dev->kthread_sdr_cap == NULL) {
-		dev->kthread_sdr_cap = kthread_run(vivid_thread_sdr_cap, dev,
-				"%s-sdr-cap", dev->v4l2_dev.name);
-
-		if (IS_ERR(dev->kthread_sdr_cap)) {
-			v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n");
-			err = PTR_ERR(dev->kthread_sdr_cap);
-			dev->kthread_sdr_cap = NULL;
-		}
-	}
-	if (err) {
-		struct vivid_buffer *buf, *tmp;
-
-		list_for_each_entry_safe(buf, tmp, &dev->sdr_cap_active, list) {
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf,
-					VB2_BUF_STATE_QUEUED);
-		}
-	}
-	return err;
-}
-
-/* abort streaming and wait for last buffer */
-static void sdr_cap_stop_streaming(struct vb2_queue *vq)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-
-	if (dev->kthread_sdr_cap == NULL)
-		return;
-
-	while (!list_empty(&dev->sdr_cap_active)) {
-		struct vivid_buffer *buf;
-
-		buf = list_entry(dev->sdr_cap_active.next,
-				struct vivid_buffer, list);
-		list_del(&buf->list);
-		v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
-					   &dev->ctrl_hdl_sdr_cap);
-		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-	}
-
-	/* shutdown control thread */
-	kthread_stop(dev->kthread_sdr_cap);
-	dev->kthread_sdr_cap = NULL;
-}
-
-static void sdr_cap_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_sdr_cap);
-}
-
-const struct vb2_ops vivid_sdr_cap_qops = {
-	.queue_setup		= sdr_cap_queue_setup,
-	.buf_prepare		= sdr_cap_buf_prepare,
-	.buf_queue		= sdr_cap_buf_queue,
-	.start_streaming	= sdr_cap_start_streaming,
-	.stop_streaming		= sdr_cap_stop_streaming,
-	.buf_request_complete	= sdr_cap_buf_request_complete,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
-};
-
-int vivid_sdr_enum_freq_bands(struct file *file, void *fh,
-		struct v4l2_frequency_band *band)
-{
-	switch (band->tuner) {
-	case 0:
-		if (band->index >= ARRAY_SIZE(bands_adc))
-			return -EINVAL;
-		*band = bands_adc[band->index];
-		return 0;
-	case 1:
-		if (band->index >= ARRAY_SIZE(bands_fm))
-			return -EINVAL;
-		*band = bands_fm[band->index];
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-int vivid_sdr_g_frequency(struct file *file, void *fh,
-		struct v4l2_frequency *vf)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	switch (vf->tuner) {
-	case 0:
-		vf->frequency = dev->sdr_adc_freq;
-		vf->type = V4L2_TUNER_ADC;
-		return 0;
-	case 1:
-		vf->frequency = dev->sdr_fm_freq;
-		vf->type = V4L2_TUNER_RF;
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-int vivid_sdr_s_frequency(struct file *file, void *fh,
-		const struct v4l2_frequency *vf)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	unsigned freq = vf->frequency;
-	unsigned band;
-
-	switch (vf->tuner) {
-	case 0:
-		if (vf->type != V4L2_TUNER_ADC)
-			return -EINVAL;
-		if (freq < BAND_ADC_0)
-			band = 0;
-		else if (freq < BAND_ADC_1)
-			band = 1;
-		else
-			band = 2;
-
-		freq = clamp_t(unsigned, freq,
-				bands_adc[band].rangelow,
-				bands_adc[band].rangehigh);
-
-		if (vb2_is_streaming(&dev->vb_sdr_cap_q) &&
-		    freq != dev->sdr_adc_freq) {
-			/* resync the thread's timings */
-			dev->sdr_cap_seq_resync = true;
-		}
-		dev->sdr_adc_freq = freq;
-		return 0;
-	case 1:
-		if (vf->type != V4L2_TUNER_RF)
-			return -EINVAL;
-		dev->sdr_fm_freq = clamp_t(unsigned, freq,
-				bands_fm[0].rangelow,
-				bands_fm[0].rangehigh);
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-int vivid_sdr_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
-{
-	switch (vt->index) {
-	case 0:
-		strscpy(vt->name, "ADC", sizeof(vt->name));
-		vt->type = V4L2_TUNER_ADC;
-		vt->capability =
-			V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
-		vt->rangelow = bands_adc[0].rangelow;
-		vt->rangehigh = bands_adc[2].rangehigh;
-		return 0;
-	case 1:
-		strscpy(vt->name, "RF", sizeof(vt->name));
-		vt->type = V4L2_TUNER_RF;
-		vt->capability =
-			V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
-		vt->rangelow = bands_fm[0].rangelow;
-		vt->rangehigh = bands_fm[0].rangehigh;
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-int vivid_sdr_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt)
-{
-	if (vt->index > 1)
-		return -EINVAL;
-	return 0;
-}
-
-int vidioc_enum_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f)
-{
-	if (f->index >= ARRAY_SIZE(formats))
-		return -EINVAL;
-	f->pixelformat = formats[f->index].pixelformat;
-	return 0;
-}
-
-int vidioc_g_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	f->fmt.sdr.pixelformat = dev->sdr_pixelformat;
-	f->fmt.sdr.buffersize = dev->sdr_buffersize;
-	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
-	return 0;
-}
-
-int vidioc_s_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct vb2_queue *q = &dev->vb_sdr_cap_q;
-	int i;
-
-	if (vb2_is_busy(q))
-		return -EBUSY;
-
-	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
-	for (i = 0; i < ARRAY_SIZE(formats); i++) {
-		if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
-			dev->sdr_pixelformat = formats[i].pixelformat;
-			dev->sdr_buffersize = formats[i].buffersize;
-			f->fmt.sdr.buffersize = formats[i].buffersize;
-			return 0;
-		}
-	}
-	dev->sdr_pixelformat = formats[0].pixelformat;
-	dev->sdr_buffersize = formats[0].buffersize;
-	f->fmt.sdr.pixelformat = formats[0].pixelformat;
-	f->fmt.sdr.buffersize = formats[0].buffersize;
-	return 0;
-}
-
-int vidioc_try_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f)
-{
-	int i;
-
-	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
-	for (i = 0; i < ARRAY_SIZE(formats); i++) {
-		if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
-			f->fmt.sdr.buffersize = formats[i].buffersize;
-			return 0;
-		}
-	}
-	f->fmt.sdr.pixelformat = formats[0].pixelformat;
-	f->fmt.sdr.buffersize = formats[0].buffersize;
-	return 0;
-}
-
-#define FIXP_N    (15)
-#define FIXP_FRAC (1 << FIXP_N)
-#define FIXP_2PI  ((int)(2 * 3.141592653589 * FIXP_FRAC))
-#define M_100000PI (3.14159 * 100000)
-
-void vivid_sdr_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf)
-{
-	u8 *vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
-	unsigned long i;
-	unsigned long plane_size = vb2_plane_size(&buf->vb.vb2_buf, 0);
-	s64 s64tmp;
-	s32 src_phase_step;
-	s32 mod_phase_step;
-	s32 fixp_i;
-	s32 fixp_q;
-
-	/* calculate phase step */
-	#define BEEP_FREQ 1000 /* 1kHz beep */
-	src_phase_step = DIV_ROUND_CLOSEST(FIXP_2PI * BEEP_FREQ,
-					   dev->sdr_adc_freq);
-
-	for (i = 0; i < plane_size; i += 2) {
-		mod_phase_step = fixp_cos32_rad(dev->sdr_fixp_src_phase,
-						FIXP_2PI) >> (31 - FIXP_N);
-
-		dev->sdr_fixp_src_phase += src_phase_step;
-		s64tmp = (s64) mod_phase_step * dev->sdr_fm_deviation;
-		dev->sdr_fixp_mod_phase += div_s64(s64tmp, M_100000PI);
-
-		/*
-		 * Transfer phase angle to [0, 2xPI] in order to avoid variable
-		 * overflow and make it suitable for cosine implementation
-		 * used, which does not support negative angles.
-		 */
-		dev->sdr_fixp_src_phase %= FIXP_2PI;
-		dev->sdr_fixp_mod_phase %= FIXP_2PI;
-
-		if (dev->sdr_fixp_mod_phase < 0)
-			dev->sdr_fixp_mod_phase += FIXP_2PI;
-
-		fixp_i = fixp_cos32_rad(dev->sdr_fixp_mod_phase, FIXP_2PI);
-		fixp_q = fixp_sin32_rad(dev->sdr_fixp_mod_phase, FIXP_2PI);
-
-		/* Normalize fraction values represented with 32 bit precision
-		 * to fixed point representation with FIXP_N bits */
-		fixp_i >>= (31 - FIXP_N);
-		fixp_q >>= (31 - FIXP_N);
-
-		switch (dev->sdr_pixelformat) {
-		case V4L2_SDR_FMT_CU8:
-			/* convert 'fixp float' to u8 [0, +255] */
-			/* u8 = X * 127.5 + 127.5; X is float [-1.0, +1.0] */
-			fixp_i = fixp_i * 1275 + FIXP_FRAC * 1275;
-			fixp_q = fixp_q * 1275 + FIXP_FRAC * 1275;
-			*vbuf++ = DIV_ROUND_CLOSEST(fixp_i, FIXP_FRAC * 10);
-			*vbuf++ = DIV_ROUND_CLOSEST(fixp_q, FIXP_FRAC * 10);
-			break;
-		case V4L2_SDR_FMT_CS8:
-			/* convert 'fixp float' to s8 [-128, +127] */
-			/* s8 = X * 127.5 - 0.5; X is float [-1.0, +1.0] */
-			fixp_i = fixp_i * 1275 - FIXP_FRAC * 5;
-			fixp_q = fixp_q * 1275 - FIXP_FRAC * 5;
-			*vbuf++ = DIV_ROUND_CLOSEST(fixp_i, FIXP_FRAC * 10);
-			*vbuf++ = DIV_ROUND_CLOSEST(fixp_q, FIXP_FRAC * 10);
-			break;
-		default:
-			break;
-		}
-	}
-}
diff --git a/drivers/media/platform/vivid/vivid-sdr-cap.h b/drivers/media/platform/vivid/vivid-sdr-cap.h
deleted file mode 100644
index 813c9248e5a7..000000000000
--- a/drivers/media/platform/vivid/vivid-sdr-cap.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-sdr-cap.h - software defined radio support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_SDR_CAP_H_
-#define _VIVID_SDR_CAP_H_
-
-int vivid_sdr_enum_freq_bands(struct file *file, void *fh, struct v4l2_frequency_band *band);
-int vivid_sdr_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf);
-int vivid_sdr_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf);
-int vivid_sdr_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt);
-int vivid_sdr_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt);
-int vidioc_enum_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f);
-int vidioc_g_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f);
-int vidioc_s_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f);
-int vidioc_try_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f);
-void vivid_sdr_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf);
-
-extern const struct vb2_ops vivid_sdr_cap_qops;
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-touch-cap.c b/drivers/media/platform/vivid/vivid-touch-cap.c
deleted file mode 100644
index ebb00b128030..000000000000
--- a/drivers/media/platform/vivid/vivid-touch-cap.c
+++ /dev/null
@@ -1,341 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-touch-cap.c - touch support functions.
- */
-
-#include "vivid-core.h"
-#include "vivid-kthread-touch.h"
-#include "vivid-vid-common.h"
-#include "vivid-touch-cap.h"
-
-static int touch_cap_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-				 unsigned int *nplanes, unsigned int sizes[],
-				 struct device *alloc_devs[])
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	struct v4l2_pix_format *f = &dev->tch_format;
-	unsigned int size = f->sizeimage;
-
-	if (*nplanes) {
-		if (sizes[0] < size)
-			return -EINVAL;
-	} else {
-		sizes[0] = size;
-	}
-
-	if (vq->num_buffers + *nbuffers < 2)
-		*nbuffers = 2 - vq->num_buffers;
-
-	*nplanes = 1;
-	return 0;
-}
-
-static int touch_cap_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct v4l2_pix_format *f = &dev->tch_format;
-	unsigned int size = f->sizeimage;
-
-	if (dev->buf_prepare_error) {
-		/*
-		 * Error injection: test what happens if buf_prepare() returns
-		 * an error.
-		 */
-		dev->buf_prepare_error = false;
-		return -EINVAL;
-	}
-	if (vb2_plane_size(vb, 0) < size) {
-		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
-			__func__, vb2_plane_size(vb, 0), size);
-		return -EINVAL;
-	}
-	vb2_set_plane_payload(vb, 0, size);
-
-	return 0;
-}
-
-static void touch_cap_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
-
-	vbuf->field = V4L2_FIELD_NONE;
-	spin_lock(&dev->slock);
-	list_add_tail(&buf->list, &dev->touch_cap_active);
-	spin_unlock(&dev->slock);
-}
-
-static int touch_cap_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	int err;
-
-	dev->touch_cap_seq_count = 0;
-	if (dev->start_streaming_error) {
-		dev->start_streaming_error = false;
-		err = -EINVAL;
-	} else {
-		err = vivid_start_generating_touch_cap(dev);
-	}
-	if (err) {
-		struct vivid_buffer *buf, *tmp;
-
-		list_for_each_entry_safe(buf, tmp,
-					 &dev->touch_cap_active, list) {
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf,
-					VB2_BUF_STATE_QUEUED);
-		}
-	}
-	return err;
-}
-
-/* abort streaming and wait for last buffer */
-static void touch_cap_stop_streaming(struct vb2_queue *vq)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-
-	vivid_stop_generating_touch_cap(dev);
-}
-
-static void touch_cap_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_touch_cap);
-}
-
-const struct vb2_ops vivid_touch_cap_qops = {
-	.queue_setup		= touch_cap_queue_setup,
-	.buf_prepare		= touch_cap_buf_prepare,
-	.buf_queue		= touch_cap_buf_queue,
-	.start_streaming	= touch_cap_start_streaming,
-	.stop_streaming		= touch_cap_stop_streaming,
-	.buf_request_complete	= touch_cap_buf_request_complete,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
-};
-
-int vivid_enum_fmt_tch(struct file *file, void  *priv, struct v4l2_fmtdesc *f)
-{
-	if (f->index)
-		return -EINVAL;
-
-	f->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
-	return 0;
-}
-
-int vivid_g_fmt_tch(struct file *file, void *priv, struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-	f->fmt.pix = dev->tch_format;
-	return 0;
-}
-
-int vivid_g_fmt_tch_mplane(struct file *file, void *priv, struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_format sp_fmt;
-
-	if (!dev->multiplanar)
-		return -ENOTTY;
-	sp_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	sp_fmt.fmt.pix = dev->tch_format;
-	fmt_sp2mp(&sp_fmt, f);
-	return 0;
-}
-
-int vivid_g_parm_tch(struct file *file, void *priv,
-		     struct v4l2_streamparm *parm)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (parm->type != (dev->multiplanar ?
-			   V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :
-			   V4L2_BUF_TYPE_VIDEO_CAPTURE))
-		return -EINVAL;
-
-	parm->parm.capture.capability   = V4L2_CAP_TIMEPERFRAME;
-	parm->parm.capture.timeperframe = dev->timeperframe_tch_cap;
-	parm->parm.capture.readbuffers  = 1;
-	return 0;
-}
-
-int vivid_enum_input_tch(struct file *file, void *priv, struct v4l2_input *inp)
-{
-	if (inp->index)
-		return -EINVAL;
-
-	inp->type = V4L2_INPUT_TYPE_TOUCH;
-	strscpy(inp->name, "Vivid Touch", sizeof(inp->name));
-	inp->capabilities = 0;
-	return 0;
-}
-
-int vivid_g_input_tch(struct file *file, void *priv, unsigned int *i)
-{
-	*i = 0;
-	return 0;
-}
-
-int vivid_set_touch(struct vivid_dev *dev, unsigned int i)
-{
-	struct v4l2_pix_format *f = &dev->tch_format;
-
-	if (i)
-		return -EINVAL;
-
-	f->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
-	f->width =  VIVID_TCH_WIDTH;
-	f->height = VIVID_TCH_HEIGHT;
-	f->field = V4L2_FIELD_NONE;
-	f->colorspace = V4L2_COLORSPACE_RAW;
-	f->bytesperline = f->width * sizeof(s16);
-	f->sizeimage = f->width * f->height * sizeof(s16);
-	return 0;
-}
-
-int vivid_s_input_tch(struct file *file, void *priv, unsigned int i)
-{
-	return vivid_set_touch(video_drvdata(file), i);
-}
-
-static void vivid_fill_buff_noise(__s16 *tch_buf, int size)
-{
-	int i;
-
-	/* Fill 10% of the values within range -3 and 3, zero the others */
-	for (i = 0; i < size; i++) {
-		unsigned int rand = get_random_int();
-
-		if (rand % 10)
-			tch_buf[i] = 0;
-		else
-			tch_buf[i] = (rand / 10) % 7 - 3;
-	}
-}
-
-static inline int get_random_pressure(void)
-{
-	return get_random_int() % VIVID_PRESSURE_LIMIT;
-}
-
-static void vivid_tch_buf_set(struct v4l2_pix_format *f,
-			      __s16 *tch_buf,
-			      int index)
-{
-	unsigned int x = index % f->width;
-	unsigned int y = index / f->width;
-	unsigned int offset = VIVID_MIN_PRESSURE;
-
-	tch_buf[index] = offset + get_random_pressure();
-	offset /= 2;
-	if (x)
-		tch_buf[index - 1] = offset + get_random_pressure();
-	if (x < f->width - 1)
-		tch_buf[index + 1] = offset + get_random_pressure();
-	if (y)
-		tch_buf[index - f->width] = offset + get_random_pressure();
-	if (y < f->height - 1)
-		tch_buf[index + f->width] = offset + get_random_pressure();
-	offset /= 2;
-	if (x && y)
-		tch_buf[index - 1 - f->width] = offset + get_random_pressure();
-	if (x < f->width - 1 && y)
-		tch_buf[index + 1 - f->width] = offset + get_random_pressure();
-	if (x && y < f->height - 1)
-		tch_buf[index - 1 + f->width] = offset + get_random_pressure();
-	if (x < f->width - 1 && y < f->height - 1)
-		tch_buf[index + 1 + f->width] = offset + get_random_pressure();
-}
-
-void vivid_fillbuff_tch(struct vivid_dev *dev, struct vivid_buffer *buf)
-{
-	struct v4l2_pix_format *f = &dev->tch_format;
-	int size = f->width * f->height;
-	int x, y, xstart, ystart, offset_x, offset_y;
-	unsigned int test_pattern, test_pat_idx, rand;
-
-	__s16 *tch_buf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
-
-	buf->vb.sequence = dev->touch_cap_seq_count;
-	test_pattern = (buf->vb.sequence / TCH_SEQ_COUNT) % TEST_CASE_MAX;
-	test_pat_idx = buf->vb.sequence % TCH_SEQ_COUNT;
-
-	vivid_fill_buff_noise(tch_buf, size);
-
-	if (test_pat_idx >= TCH_PATTERN_COUNT)
-		return;
-
-	if (test_pat_idx == 0)
-		dev->tch_pat_random = get_random_int();
-	rand = dev->tch_pat_random;
-
-	switch (test_pattern) {
-	case SINGLE_TAP:
-		if (test_pat_idx == 2)
-			vivid_tch_buf_set(f, tch_buf, rand % size);
-		break;
-	case DOUBLE_TAP:
-		if (test_pat_idx == 2 || test_pat_idx == 4)
-			vivid_tch_buf_set(f, tch_buf, rand % size);
-		break;
-	case TRIPLE_TAP:
-		if (test_pat_idx == 2 || test_pat_idx == 4 || test_pat_idx == 6)
-			vivid_tch_buf_set(f, tch_buf, rand % size);
-		break;
-	case MOVE_LEFT_TO_RIGHT:
-		vivid_tch_buf_set(f, tch_buf,
-				  (rand % f->height) * f->width +
-				  test_pat_idx *
-				  (f->width / TCH_PATTERN_COUNT));
-		break;
-	case ZOOM_IN:
-		x = f->width / 2;
-		y = f->height / 2;
-		offset_x = ((TCH_PATTERN_COUNT - 1 - test_pat_idx) * x) /
-				TCH_PATTERN_COUNT;
-		offset_y = ((TCH_PATTERN_COUNT - 1 - test_pat_idx) * y) /
-				TCH_PATTERN_COUNT;
-		vivid_tch_buf_set(f, tch_buf,
-				  (x - offset_x) + f->width * (y - offset_y));
-		vivid_tch_buf_set(f, tch_buf,
-				  (x + offset_x) + f->width * (y + offset_y));
-		break;
-	case ZOOM_OUT:
-		x = f->width / 2;
-		y = f->height / 2;
-		offset_x = (test_pat_idx * x) / TCH_PATTERN_COUNT;
-		offset_y = (test_pat_idx * y) / TCH_PATTERN_COUNT;
-		vivid_tch_buf_set(f, tch_buf,
-				  (x - offset_x) + f->width * (y - offset_y));
-		vivid_tch_buf_set(f, tch_buf,
-				  (x + offset_x) + f->width * (y + offset_y));
-		break;
-	case PALM_PRESS:
-		for (x = 0; x < f->width; x++)
-			for (y = f->height / 2; y < f->height; y++)
-				tch_buf[x + f->width * y] = VIVID_MIN_PRESSURE +
-							get_random_pressure();
-		break;
-	case MULTIPLE_PRESS:
-		/* 16 pressure points */
-		for (y = 0; y < 4; y++) {
-			for (x = 0; x < 4; x++) {
-				ystart = (y * f->height) / 4 + f->height / 8;
-				xstart = (x * f->width) / 4 + f->width / 8;
-				vivid_tch_buf_set(f, tch_buf,
-						  ystart * f->width + xstart);
-			}
-		}
-		break;
-	}
-#ifdef __BIG_ENDIAN__
-	for (x = 0; x < size; x++)
-		tch_buf[x] = (__force s16)__cpu_to_le16((u16)tch_buf[x]);
-#endif
-}
diff --git a/drivers/media/platform/vivid/vivid-touch-cap.h b/drivers/media/platform/vivid/vivid-touch-cap.h
deleted file mode 100644
index 07e514046ae8..000000000000
--- a/drivers/media/platform/vivid/vivid-touch-cap.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-touch-cap.h - touch support functions.
- */
-#ifndef _VIVID_TOUCH_CAP_H_
-#define _VIVID_TOUCH_CAP_H_
-
-#define VIVID_TCH_HEIGHT	12
-#define VIVID_TCH_WIDTH		21
-#define VIVID_MIN_PRESSURE	180
-#define VIVID_PRESSURE_LIMIT	40
-#define TCH_SEQ_COUNT		16
-#define TCH_PATTERN_COUNT	12
-
-enum vivid_tch_test {
-	SINGLE_TAP,
-	DOUBLE_TAP,
-	TRIPLE_TAP,
-	MOVE_LEFT_TO_RIGHT,
-	ZOOM_IN,
-	ZOOM_OUT,
-	PALM_PRESS,
-	MULTIPLE_PRESS,
-	TEST_CASE_MAX
-};
-
-extern const struct vb2_ops vivid_touch_cap_qops;
-
-int vivid_enum_fmt_tch(struct file *file, void  *priv, struct v4l2_fmtdesc *f);
-int vivid_g_fmt_tch(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_g_fmt_tch_mplane(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_enum_input_tch(struct file *file, void *priv, struct v4l2_input *inp);
-int vivid_g_input_tch(struct file *file, void *priv, unsigned int *i);
-int vivid_s_input_tch(struct file *file, void *priv, unsigned int i);
-void vivid_fillbuff_tch(struct vivid_dev *dev, struct vivid_buffer *buf);
-int vivid_set_touch(struct vivid_dev *dev, unsigned int i);
-int vivid_g_parm_tch(struct file *file, void *priv,
-		     struct v4l2_streamparm *parm);
-#endif
diff --git a/drivers/media/platform/vivid/vivid-vbi-cap.c b/drivers/media/platform/vivid/vivid-vbi-cap.c
deleted file mode 100644
index 1a9348eea781..000000000000
--- a/drivers/media/platform/vivid/vivid-vbi-cap.c
+++ /dev/null
@@ -1,365 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-vbi-cap.c - vbi capture support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-
-#include "vivid-core.h"
-#include "vivid-kthread-cap.h"
-#include "vivid-vbi-cap.h"
-#include "vivid-vbi-gen.h"
-
-static void vivid_sliced_vbi_cap_fill(struct vivid_dev *dev, unsigned seqnr)
-{
-	struct vivid_vbi_gen_data *vbi_gen = &dev->vbi_gen;
-	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
-
-	vivid_vbi_gen_sliced(vbi_gen, is_60hz, seqnr);
-
-	if (!is_60hz) {
-		if (dev->loop_video) {
-			if (dev->vbi_out_have_wss) {
-				vbi_gen->data[12].data[0] = dev->vbi_out_wss[0];
-				vbi_gen->data[12].data[1] = dev->vbi_out_wss[1];
-			} else {
-				vbi_gen->data[12].id = 0;
-			}
-		} else {
-			switch (tpg_g_video_aspect(&dev->tpg)) {
-			case TPG_VIDEO_ASPECT_14X9_CENTRE:
-				vbi_gen->data[12].data[0] = 0x01;
-				break;
-			case TPG_VIDEO_ASPECT_16X9_CENTRE:
-				vbi_gen->data[12].data[0] = 0x0b;
-				break;
-			case TPG_VIDEO_ASPECT_16X9_ANAMORPHIC:
-				vbi_gen->data[12].data[0] = 0x07;
-				break;
-			case TPG_VIDEO_ASPECT_4X3:
-			default:
-				vbi_gen->data[12].data[0] = 0x08;
-				break;
-			}
-		}
-	} else if (dev->loop_video && is_60hz) {
-		if (dev->vbi_out_have_cc[0]) {
-			vbi_gen->data[0].data[0] = dev->vbi_out_cc[0][0];
-			vbi_gen->data[0].data[1] = dev->vbi_out_cc[0][1];
-		} else {
-			vbi_gen->data[0].id = 0;
-		}
-		if (dev->vbi_out_have_cc[1]) {
-			vbi_gen->data[1].data[0] = dev->vbi_out_cc[1][0];
-			vbi_gen->data[1].data[1] = dev->vbi_out_cc[1][1];
-		} else {
-			vbi_gen->data[1].id = 0;
-		}
-	}
-}
-
-static void vivid_g_fmt_vbi_cap(struct vivid_dev *dev, struct v4l2_vbi_format *vbi)
-{
-	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
-
-	vbi->sampling_rate = 27000000;
-	vbi->offset = 24;
-	vbi->samples_per_line = 1440;
-	vbi->sample_format = V4L2_PIX_FMT_GREY;
-	vbi->start[0] = is_60hz ? V4L2_VBI_ITU_525_F1_START + 9 : V4L2_VBI_ITU_625_F1_START + 5;
-	vbi->start[1] = is_60hz ? V4L2_VBI_ITU_525_F2_START + 9 : V4L2_VBI_ITU_625_F2_START + 5;
-	vbi->count[0] = vbi->count[1] = is_60hz ? 12 : 18;
-	vbi->flags = dev->vbi_cap_interlaced ? V4L2_VBI_INTERLACED : 0;
-	vbi->reserved[0] = 0;
-	vbi->reserved[1] = 0;
-}
-
-void vivid_raw_vbi_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf)
-{
-	struct v4l2_vbi_format vbi;
-	u8 *vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
-
-	vivid_g_fmt_vbi_cap(dev, &vbi);
-	buf->vb.sequence = dev->vbi_cap_seq_count;
-	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
-		buf->vb.sequence /= 2;
-
-	vivid_sliced_vbi_cap_fill(dev, buf->vb.sequence);
-
-	memset(vbuf, 0x10, vb2_plane_size(&buf->vb.vb2_buf, 0));
-
-	if (!VIVID_INVALID_SIGNAL(dev->std_signal_mode[dev->input]))
-		vivid_vbi_gen_raw(&dev->vbi_gen, &vbi, vbuf);
-}
-
-
-void vivid_sliced_vbi_cap_process(struct vivid_dev *dev,
-			struct vivid_buffer *buf)
-{
-	struct v4l2_sliced_vbi_data *vbuf =
-			vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
-
-	buf->vb.sequence = dev->vbi_cap_seq_count;
-	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
-		buf->vb.sequence /= 2;
-
-	vivid_sliced_vbi_cap_fill(dev, buf->vb.sequence);
-
-	memset(vbuf, 0, vb2_plane_size(&buf->vb.vb2_buf, 0));
-	if (!VIVID_INVALID_SIGNAL(dev->std_signal_mode[dev->input])) {
-		unsigned i;
-
-		for (i = 0; i < 25; i++)
-			vbuf[i] = dev->vbi_gen.data[i];
-	}
-}
-
-static int vbi_cap_queue_setup(struct vb2_queue *vq,
-		       unsigned *nbuffers, unsigned *nplanes,
-		       unsigned sizes[], struct device *alloc_devs[])
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
-	unsigned size = vq->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE ?
-		36 * sizeof(struct v4l2_sliced_vbi_data) :
-		1440 * 2 * (is_60hz ? 12 : 18);
-
-	if (!vivid_is_sdtv_cap(dev))
-		return -EINVAL;
-
-	sizes[0] = size;
-
-	if (vq->num_buffers + *nbuffers < 2)
-		*nbuffers = 2 - vq->num_buffers;
-
-	*nplanes = 1;
-	return 0;
-}
-
-static int vbi_cap_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
-	unsigned size = vb->vb2_queue->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE ?
-		36 * sizeof(struct v4l2_sliced_vbi_data) :
-		1440 * 2 * (is_60hz ? 12 : 18);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->buf_prepare_error) {
-		/*
-		 * Error injection: test what happens if buf_prepare() returns
-		 * an error.
-		 */
-		dev->buf_prepare_error = false;
-		return -EINVAL;
-	}
-	if (vb2_plane_size(vb, 0) < size) {
-		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
-				__func__, vb2_plane_size(vb, 0), size);
-		return -EINVAL;
-	}
-	vb2_set_plane_payload(vb, 0, size);
-
-	return 0;
-}
-
-static void vbi_cap_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	spin_lock(&dev->slock);
-	list_add_tail(&buf->list, &dev->vbi_cap_active);
-	spin_unlock(&dev->slock);
-}
-
-static int vbi_cap_start_streaming(struct vb2_queue *vq, unsigned count)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	int err;
-
-	dprintk(dev, 1, "%s\n", __func__);
-	dev->vbi_cap_seq_count = 0;
-	if (dev->start_streaming_error) {
-		dev->start_streaming_error = false;
-		err = -EINVAL;
-	} else {
-		err = vivid_start_generating_vid_cap(dev, &dev->vbi_cap_streaming);
-	}
-	if (err) {
-		struct vivid_buffer *buf, *tmp;
-
-		list_for_each_entry_safe(buf, tmp, &dev->vbi_cap_active, list) {
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf,
-					VB2_BUF_STATE_QUEUED);
-		}
-	}
-	return err;
-}
-
-/* abort streaming and wait for last buffer */
-static void vbi_cap_stop_streaming(struct vb2_queue *vq)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-
-	dprintk(dev, 1, "%s\n", __func__);
-	vivid_stop_generating_vid_cap(dev, &dev->vbi_cap_streaming);
-}
-
-static void vbi_cap_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_vbi_cap);
-}
-
-const struct vb2_ops vivid_vbi_cap_qops = {
-	.queue_setup		= vbi_cap_queue_setup,
-	.buf_prepare		= vbi_cap_buf_prepare,
-	.buf_queue		= vbi_cap_buf_queue,
-	.start_streaming	= vbi_cap_start_streaming,
-	.stop_streaming		= vbi_cap_stop_streaming,
-	.buf_request_complete	= vbi_cap_buf_request_complete,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
-};
-
-int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_vbi_format *vbi = &f->fmt.vbi;
-
-	if (!vivid_is_sdtv_cap(dev) || !dev->has_raw_vbi_cap)
-		return -EINVAL;
-
-	vivid_g_fmt_vbi_cap(dev, vbi);
-	return 0;
-}
-
-int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	int ret = vidioc_g_fmt_vbi_cap(file, priv, f);
-
-	if (ret)
-		return ret;
-	if (dev->stream_sliced_vbi_cap && vb2_is_busy(&dev->vb_vbi_cap_q))
-		return -EBUSY;
-	dev->stream_sliced_vbi_cap = false;
-	dev->vbi_cap_dev.queue->type = V4L2_BUF_TYPE_VBI_CAPTURE;
-	return 0;
-}
-
-void vivid_fill_service_lines(struct v4l2_sliced_vbi_format *vbi, u32 service_set)
-{
-	vbi->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36;
-	vbi->service_set = service_set;
-	memset(vbi->service_lines, 0, sizeof(vbi->service_lines));
-	memset(vbi->reserved, 0, sizeof(vbi->reserved));
-
-	if (vbi->service_set == 0)
-		return;
-
-	if (vbi->service_set & V4L2_SLICED_CAPTION_525) {
-		vbi->service_lines[0][21] = V4L2_SLICED_CAPTION_525;
-		vbi->service_lines[1][21] = V4L2_SLICED_CAPTION_525;
-	}
-	if (vbi->service_set & V4L2_SLICED_WSS_625) {
-		unsigned i;
-
-		for (i = 7; i <= 18; i++)
-			vbi->service_lines[0][i] =
-			vbi->service_lines[1][i] = V4L2_SLICED_TELETEXT_B;
-		vbi->service_lines[0][23] = V4L2_SLICED_WSS_625;
-	}
-}
-
-int vidioc_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
-
-	if (!vivid_is_sdtv_cap(dev) || !dev->has_sliced_vbi_cap)
-		return -EINVAL;
-
-	vivid_fill_service_lines(vbi, dev->service_set_cap);
-	return 0;
-}
-
-int vidioc_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
-	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
-	u32 service_set = vbi->service_set;
-
-	if (!vivid_is_sdtv_cap(dev) || !dev->has_sliced_vbi_cap)
-		return -EINVAL;
-
-	service_set &= is_60hz ? V4L2_SLICED_CAPTION_525 :
-				 V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
-	vivid_fill_service_lines(vbi, service_set);
-	return 0;
-}
-
-int vidioc_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
-	int ret = vidioc_try_fmt_sliced_vbi_cap(file, fh, fmt);
-
-	if (ret)
-		return ret;
-	if (!dev->stream_sliced_vbi_cap && vb2_is_busy(&dev->vb_vbi_cap_q))
-		return -EBUSY;
-	dev->service_set_cap = vbi->service_set;
-	dev->stream_sliced_vbi_cap = true;
-	dev->vbi_cap_dev.queue->type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
-	return 0;
-}
-
-int vidioc_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced_vbi_cap *cap)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-	bool is_60hz;
-
-	if (vdev->vfl_dir == VFL_DIR_RX) {
-		is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
-		if (!vivid_is_sdtv_cap(dev) || !dev->has_sliced_vbi_cap ||
-		    cap->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-			return -EINVAL;
-	} else {
-		is_60hz = dev->std_out & V4L2_STD_525_60;
-		if (!vivid_is_svid_out(dev) || !dev->has_sliced_vbi_out ||
-		    cap->type != V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
-			return -EINVAL;
-	}
-
-	cap->service_set = is_60hz ? V4L2_SLICED_CAPTION_525 :
-				     V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
-	if (is_60hz) {
-		cap->service_lines[0][21] = V4L2_SLICED_CAPTION_525;
-		cap->service_lines[1][21] = V4L2_SLICED_CAPTION_525;
-	} else {
-		unsigned i;
-
-		for (i = 7; i <= 18; i++)
-			cap->service_lines[0][i] =
-			cap->service_lines[1][i] = V4L2_SLICED_TELETEXT_B;
-		cap->service_lines[0][23] = V4L2_SLICED_WSS_625;
-	}
-	return 0;
-}
diff --git a/drivers/media/platform/vivid/vivid-vbi-cap.h b/drivers/media/platform/vivid/vivid-vbi-cap.h
deleted file mode 100644
index 91d2de01381c..000000000000
--- a/drivers/media/platform/vivid/vivid-vbi-cap.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-vbi-cap.h - vbi capture support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_VBI_CAP_H_
-#define _VIVID_VBI_CAP_H_
-
-void vivid_fill_time_of_day_packet(u8 *packet);
-void vivid_raw_vbi_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf);
-void vivid_sliced_vbi_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf);
-void vivid_sliced_vbi_out_process(struct vivid_dev *dev, struct vivid_buffer *buf);
-int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
-					struct v4l2_format *f);
-int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
-					struct v4l2_format *f);
-int vidioc_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt);
-int vidioc_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt);
-int vidioc_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt);
-int vidioc_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced_vbi_cap *cap);
-
-void vivid_fill_service_lines(struct v4l2_sliced_vbi_format *vbi, u32 service_set);
-
-extern const struct vb2_ops vivid_vbi_cap_qops;
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-vbi-gen.c b/drivers/media/platform/vivid/vivid-vbi-gen.c
deleted file mode 100644
index acc98445a1fa..000000000000
--- a/drivers/media/platform/vivid/vivid-vbi-gen.c
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-vbi-gen.c - vbi generator support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/ktime.h>
-#include <linux/string.h>
-#include <linux/videodev2.h>
-
-#include "vivid-vbi-gen.h"
-
-static void wss_insert(u8 *wss, u32 val, unsigned size)
-{
-	while (size--)
-		*wss++ = (val & (1 << size)) ? 0xc0 : 0x10;
-}
-
-static void vivid_vbi_gen_wss_raw(const struct v4l2_sliced_vbi_data *data,
-		u8 *buf, unsigned sampling_rate)
-{
-	const unsigned rate = 5000000;	/* WSS has a 5 MHz transmission rate */
-	u8 wss[29 + 24 + 24 + 24 + 18 + 18] = { 0 };
-	const unsigned zero = 0x07;
-	const unsigned one = 0x38;
-	unsigned bit = 0;
-	u16 wss_data;
-	int i;
-
-	wss_insert(wss + bit, 0x1f1c71c7, 29); bit += 29;
-	wss_insert(wss + bit, 0x1e3c1f, 24); bit += 24;
-
-	wss_data = (data->data[1] << 8) | data->data[0];
-	for (i = 0; i <= 13; i++, bit += 6)
-		wss_insert(wss + bit, (wss_data & (1 << i)) ? one : zero, 6);
-
-	for (i = 0, bit = 0; bit < sizeof(wss); bit++) {
-		unsigned n = ((bit + 1) * sampling_rate) / rate;
-
-		while (i < n)
-			buf[i++] = wss[bit];
-	}
-}
-
-static void vivid_vbi_gen_teletext_raw(const struct v4l2_sliced_vbi_data *data,
-		u8 *buf, unsigned sampling_rate)
-{
-	const unsigned rate = 6937500 / 10;	/* Teletext has a 6.9375 MHz transmission rate */
-	u8 teletext[45] = { 0x55, 0x55, 0x27 };
-	unsigned bit = 0;
-	int i;
-
-	memcpy(teletext + 3, data->data, sizeof(teletext) - 3);
-	/* prevents 32 bit overflow */
-	sampling_rate /= 10;
-
-	for (i = 0, bit = 0; bit < sizeof(teletext) * 8; bit++) {
-		unsigned n = ((bit + 1) * sampling_rate) / rate;
-		u8 val = (teletext[bit / 8] & (1 << (bit & 7))) ? 0xc0 : 0x10;
-
-		while (i < n)
-			buf[i++] = val;
-	}
-}
-
-static void cc_insert(u8 *cc, u8 ch)
-{
-	unsigned tot = 0;
-	unsigned i;
-
-	for (i = 0; i < 7; i++) {
-		cc[2 * i] = cc[2 * i + 1] = (ch & (1 << i)) ? 1 : 0;
-		tot += cc[2 * i];
-	}
-	cc[14] = cc[15] = !(tot & 1);
-}
-
-#define CC_PREAMBLE_BITS (14 + 4 + 2)
-
-static void vivid_vbi_gen_cc_raw(const struct v4l2_sliced_vbi_data *data,
-		u8 *buf, unsigned sampling_rate)
-{
-	const unsigned rate = 1000000;	/* CC has a 1 MHz transmission rate */
-
-	u8 cc[CC_PREAMBLE_BITS + 2 * 16] = {
-		/* Clock run-in: 7 cycles */
-		0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
-		/* 2 cycles of 0 */
-		0, 0, 0, 0,
-		/* Start bit of 1 (each bit is two cycles) */
-		1, 1
-	};
-	unsigned bit, i;
-
-	cc_insert(cc + CC_PREAMBLE_BITS, data->data[0]);
-	cc_insert(cc + CC_PREAMBLE_BITS + 16, data->data[1]);
-
-	for (i = 0, bit = 0; bit < sizeof(cc); bit++) {
-		unsigned n = ((bit + 1) * sampling_rate) / rate;
-
-		while (i < n)
-			buf[i++] = cc[bit] ? 0xc0 : 0x10;
-	}
-}
-
-void vivid_vbi_gen_raw(const struct vivid_vbi_gen_data *vbi,
-		const struct v4l2_vbi_format *vbi_fmt, u8 *buf)
-{
-	unsigned idx;
-
-	for (idx = 0; idx < 25; idx++) {
-		const struct v4l2_sliced_vbi_data *data = vbi->data + idx;
-		unsigned start_2nd_field;
-		unsigned line = data->line;
-		u8 *linebuf = buf;
-
-		start_2nd_field = (data->id & V4L2_SLICED_VBI_525) ? 263 : 313;
-		if (data->field)
-			line += start_2nd_field;
-		line -= vbi_fmt->start[data->field];
-
-		if (vbi_fmt->flags & V4L2_VBI_INTERLACED)
-			linebuf += (line * 2 + data->field) *
-				vbi_fmt->samples_per_line;
-		else
-			linebuf += (line + data->field * vbi_fmt->count[0]) *
-				vbi_fmt->samples_per_line;
-		if (data->id == V4L2_SLICED_CAPTION_525)
-			vivid_vbi_gen_cc_raw(data, linebuf, vbi_fmt->sampling_rate);
-		else if (data->id == V4L2_SLICED_WSS_625)
-			vivid_vbi_gen_wss_raw(data, linebuf, vbi_fmt->sampling_rate);
-		else if (data->id == V4L2_SLICED_TELETEXT_B)
-			vivid_vbi_gen_teletext_raw(data, linebuf, vbi_fmt->sampling_rate);
-	}
-}
-
-static const u8 vivid_cc_sequence1[30] = {
-	0x14, 0x20,	/* Resume Caption Loading */
-	'H',  'e',
-	'l',  'l',
-	'o',  ' ',
-	'w',  'o',
-	'r',  'l',
-	'd',  '!',
-	0x14, 0x2f,	/* End of Caption */
-};
-
-static const u8 vivid_cc_sequence2[30] = {
-	0x14, 0x20,	/* Resume Caption Loading */
-	'C',  'l',
-	'o',  's',
-	'e',  'd',
-	' ',  'c',
-	'a',  'p',
-	't',  'i',
-	'o',  'n',
-	's',  ' ',
-	't',  'e',
-	's',  't',
-	0x14, 0x2f,	/* End of Caption */
-};
-
-static u8 calc_parity(u8 val)
-{
-	unsigned i;
-	unsigned tot = 0;
-
-	for (i = 0; i < 7; i++)
-		tot += (val & (1 << i)) ? 1 : 0;
-	return val | ((tot & 1) ? 0 : 0x80);
-}
-
-static void vivid_vbi_gen_set_time_of_day(u8 *packet)
-{
-	struct tm tm;
-	u8 checksum, i;
-
-	time64_to_tm(ktime_get_real_seconds(), 0, &tm);
-	packet[0] = calc_parity(0x07);
-	packet[1] = calc_parity(0x01);
-	packet[2] = calc_parity(0x40 | tm.tm_min);
-	packet[3] = calc_parity(0x40 | tm.tm_hour);
-	packet[4] = calc_parity(0x40 | tm.tm_mday);
-	if (tm.tm_mday == 1 && tm.tm_mon == 2 &&
-	    sys_tz.tz_minuteswest > tm.tm_min + tm.tm_hour * 60)
-		packet[4] = calc_parity(0x60 | tm.tm_mday);
-	packet[5] = calc_parity(0x40 | (1 + tm.tm_mon));
-	packet[6] = calc_parity(0x40 | (1 + tm.tm_wday));
-	packet[7] = calc_parity(0x40 | ((tm.tm_year - 90) & 0x3f));
-	packet[8] = calc_parity(0x0f);
-	for (checksum = i = 0; i <= 8; i++)
-		checksum += packet[i] & 0x7f;
-	packet[9] = calc_parity(0x100 - checksum);
-	checksum = 0;
-	packet[10] = calc_parity(0x07);
-	packet[11] = calc_parity(0x04);
-	if (sys_tz.tz_minuteswest >= 0)
-		packet[12] = calc_parity(0x40 | ((sys_tz.tz_minuteswest / 60) & 0x1f));
-	else
-		packet[12] = calc_parity(0x40 | ((24 + sys_tz.tz_minuteswest / 60) & 0x1f));
-	packet[13] = calc_parity(0);
-	packet[14] = calc_parity(0x0f);
-	for (checksum = 0, i = 10; i <= 14; i++)
-		checksum += packet[i] & 0x7f;
-	packet[15] = calc_parity(0x100 - checksum);
-}
-
-static const u8 hamming[16] = {
-	0x15, 0x02, 0x49, 0x5e, 0x64, 0x73, 0x38, 0x2f,
-	0xd0, 0xc7, 0x8c, 0x9b, 0xa1, 0xb6, 0xfd, 0xea
-};
-
-static void vivid_vbi_gen_teletext(u8 *packet, unsigned line, unsigned frame)
-{
-	unsigned offset = 2;
-	unsigned i;
-
-	packet[0] = hamming[1 + ((line & 1) << 3)];
-	packet[1] = hamming[line >> 1];
-	memset(packet + 2, 0x20, 40);
-	if (line == 0) {
-		/* subcode */
-		packet[2] = hamming[frame % 10];
-		packet[3] = hamming[frame / 10];
-		packet[4] = hamming[0];
-		packet[5] = hamming[0];
-		packet[6] = hamming[0];
-		packet[7] = hamming[0];
-		packet[8] = hamming[0];
-		packet[9] = hamming[1];
-		offset = 10;
-	}
-	packet += offset;
-	memcpy(packet, "Page: 100 Row: 10", 17);
-	packet[7] = '0' + frame / 10;
-	packet[8] = '0' + frame % 10;
-	packet[15] = '0' + line / 10;
-	packet[16] = '0' + line % 10;
-	for (i = 0; i < 42 - offset; i++)
-		packet[i] = calc_parity(packet[i]);
-}
-
-void vivid_vbi_gen_sliced(struct vivid_vbi_gen_data *vbi,
-		bool is_60hz, unsigned seqnr)
-{
-	struct v4l2_sliced_vbi_data *data0 = vbi->data;
-	struct v4l2_sliced_vbi_data *data1 = vbi->data + 1;
-	unsigned frame = seqnr % 60;
-
-	memset(vbi->data, 0, sizeof(vbi->data));
-
-	if (!is_60hz) {
-		unsigned i;
-
-		for (i = 0; i <= 11; i++) {
-			data0->id = V4L2_SLICED_TELETEXT_B;
-			data0->line = 7 + i;
-			vivid_vbi_gen_teletext(data0->data, i, frame);
-			data0++;
-		}
-		data0->id = V4L2_SLICED_WSS_625;
-		data0->line = 23;
-		/* 4x3 video aspect ratio */
-		data0->data[0] = 0x08;
-		data0++;
-		for (i = 0; i <= 11; i++) {
-			data0->id = V4L2_SLICED_TELETEXT_B;
-			data0->field = 1;
-			data0->line = 7 + i;
-			vivid_vbi_gen_teletext(data0->data, 12 + i, frame);
-			data0++;
-		}
-		return;
-	}
-
-	data0->id = V4L2_SLICED_CAPTION_525;
-	data0->line = 21;
-	data1->id = V4L2_SLICED_CAPTION_525;
-	data1->field = 1;
-	data1->line = 21;
-
-	if (frame < 15) {
-		data0->data[0] = calc_parity(vivid_cc_sequence1[2 * frame]);
-		data0->data[1] = calc_parity(vivid_cc_sequence1[2 * frame + 1]);
-	} else if (frame >= 30 && frame < 45) {
-		frame -= 30;
-		data0->data[0] = calc_parity(vivid_cc_sequence2[2 * frame]);
-		data0->data[1] = calc_parity(vivid_cc_sequence2[2 * frame + 1]);
-	} else {
-		data0->data[0] = calc_parity(0);
-		data0->data[1] = calc_parity(0);
-	}
-
-	frame = seqnr % (30 * 60);
-	switch (frame) {
-	case 0:
-		vivid_vbi_gen_set_time_of_day(vbi->time_of_day_packet);
-		/* fall through */
-	case 1 ... 7:
-		data1->data[0] = vbi->time_of_day_packet[frame * 2];
-		data1->data[1] = vbi->time_of_day_packet[frame * 2 + 1];
-		break;
-	default:
-		data1->data[0] = calc_parity(0);
-		data1->data[1] = calc_parity(0);
-		break;
-	}
-}
diff --git a/drivers/media/platform/vivid/vivid-vbi-gen.h b/drivers/media/platform/vivid/vivid-vbi-gen.h
deleted file mode 100644
index 2657a7f5571c..000000000000
--- a/drivers/media/platform/vivid/vivid-vbi-gen.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-vbi-gen.h - vbi generator support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_VBI_GEN_H_
-#define _VIVID_VBI_GEN_H_
-
-struct vivid_vbi_gen_data {
-	struct v4l2_sliced_vbi_data data[25];
-	u8 time_of_day_packet[16];
-};
-
-void vivid_vbi_gen_sliced(struct vivid_vbi_gen_data *vbi,
-		bool is_60hz, unsigned seqnr);
-void vivid_vbi_gen_raw(const struct vivid_vbi_gen_data *vbi,
-		const struct v4l2_vbi_format *vbi_fmt, u8 *buf);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-vbi-out.c b/drivers/media/platform/vivid/vivid-vbi-out.c
deleted file mode 100644
index cd56476902a2..000000000000
--- a/drivers/media/platform/vivid/vivid-vbi-out.c
+++ /dev/null
@@ -1,250 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-vbi-out.c - vbi output support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-
-#include "vivid-core.h"
-#include "vivid-kthread-out.h"
-#include "vivid-vbi-out.h"
-#include "vivid-vbi-cap.h"
-
-static int vbi_out_queue_setup(struct vb2_queue *vq,
-		       unsigned *nbuffers, unsigned *nplanes,
-		       unsigned sizes[], struct device *alloc_devs[])
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	bool is_60hz = dev->std_out & V4L2_STD_525_60;
-	unsigned size = vq->type == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT ?
-		36 * sizeof(struct v4l2_sliced_vbi_data) :
-		1440 * 2 * (is_60hz ? 12 : 18);
-
-	if (!vivid_is_svid_out(dev))
-		return -EINVAL;
-
-	sizes[0] = size;
-
-	if (vq->num_buffers + *nbuffers < 2)
-		*nbuffers = 2 - vq->num_buffers;
-
-	*nplanes = 1;
-	return 0;
-}
-
-static int vbi_out_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	bool is_60hz = dev->std_out & V4L2_STD_525_60;
-	unsigned size = vb->vb2_queue->type == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT ?
-		36 * sizeof(struct v4l2_sliced_vbi_data) :
-		1440 * 2 * (is_60hz ? 12 : 18);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->buf_prepare_error) {
-		/*
-		 * Error injection: test what happens if buf_prepare() returns
-		 * an error.
-		 */
-		dev->buf_prepare_error = false;
-		return -EINVAL;
-	}
-	if (vb2_plane_size(vb, 0) < size) {
-		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
-				__func__, vb2_plane_size(vb, 0), size);
-		return -EINVAL;
-	}
-	vb2_set_plane_payload(vb, 0, size);
-
-	return 0;
-}
-
-static void vbi_out_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	spin_lock(&dev->slock);
-	list_add_tail(&buf->list, &dev->vbi_out_active);
-	spin_unlock(&dev->slock);
-}
-
-static int vbi_out_start_streaming(struct vb2_queue *vq, unsigned count)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	int err;
-
-	dprintk(dev, 1, "%s\n", __func__);
-	dev->vbi_out_seq_count = 0;
-	if (dev->start_streaming_error) {
-		dev->start_streaming_error = false;
-		err = -EINVAL;
-	} else {
-		err = vivid_start_generating_vid_out(dev, &dev->vbi_out_streaming);
-	}
-	if (err) {
-		struct vivid_buffer *buf, *tmp;
-
-		list_for_each_entry_safe(buf, tmp, &dev->vbi_out_active, list) {
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf,
-					VB2_BUF_STATE_QUEUED);
-		}
-	}
-	return err;
-}
-
-/* abort streaming and wait for last buffer */
-static void vbi_out_stop_streaming(struct vb2_queue *vq)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-
-	dprintk(dev, 1, "%s\n", __func__);
-	vivid_stop_generating_vid_out(dev, &dev->vbi_out_streaming);
-	dev->vbi_out_have_wss = false;
-	dev->vbi_out_have_cc[0] = false;
-	dev->vbi_out_have_cc[1] = false;
-}
-
-static void vbi_out_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_vbi_out);
-}
-
-const struct vb2_ops vivid_vbi_out_qops = {
-	.queue_setup		= vbi_out_queue_setup,
-	.buf_prepare		= vbi_out_buf_prepare,
-	.buf_queue		= vbi_out_buf_queue,
-	.start_streaming	= vbi_out_start_streaming,
-	.stop_streaming		= vbi_out_stop_streaming,
-	.buf_request_complete	= vbi_out_buf_request_complete,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
-};
-
-int vidioc_g_fmt_vbi_out(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_vbi_format *vbi = &f->fmt.vbi;
-	bool is_60hz = dev->std_out & V4L2_STD_525_60;
-
-	if (!vivid_is_svid_out(dev) || !dev->has_raw_vbi_out)
-		return -EINVAL;
-
-	vbi->sampling_rate = 25000000;
-	vbi->offset = 24;
-	vbi->samples_per_line = 1440;
-	vbi->sample_format = V4L2_PIX_FMT_GREY;
-	vbi->start[0] = is_60hz ? V4L2_VBI_ITU_525_F1_START + 9 : V4L2_VBI_ITU_625_F1_START + 5;
-	vbi->start[1] = is_60hz ? V4L2_VBI_ITU_525_F2_START + 9 : V4L2_VBI_ITU_625_F2_START + 5;
-	vbi->count[0] = vbi->count[1] = is_60hz ? 12 : 18;
-	vbi->flags = dev->vbi_cap_interlaced ? V4L2_VBI_INTERLACED : 0;
-	vbi->reserved[0] = 0;
-	vbi->reserved[1] = 0;
-	return 0;
-}
-
-int vidioc_s_fmt_vbi_out(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	int ret = vidioc_g_fmt_vbi_out(file, priv, f);
-
-	if (ret)
-		return ret;
-	if (vb2_is_busy(&dev->vb_vbi_out_q))
-		return -EBUSY;
-	dev->stream_sliced_vbi_out = false;
-	dev->vbi_out_dev.queue->type = V4L2_BUF_TYPE_VBI_OUTPUT;
-	return 0;
-}
-
-int vidioc_g_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
-
-	if (!vivid_is_svid_out(dev) || !dev->has_sliced_vbi_out)
-		return -EINVAL;
-
-	vivid_fill_service_lines(vbi, dev->service_set_out);
-	return 0;
-}
-
-int vidioc_try_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
-	bool is_60hz = dev->std_out & V4L2_STD_525_60;
-	u32 service_set = vbi->service_set;
-
-	if (!vivid_is_svid_out(dev) || !dev->has_sliced_vbi_out)
-		return -EINVAL;
-
-	service_set &= is_60hz ? V4L2_SLICED_CAPTION_525 :
-				 V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
-	vivid_fill_service_lines(vbi, service_set);
-	return 0;
-}
-
-int vidioc_s_fmt_sliced_vbi_out(struct file *file, void *fh,
-		struct v4l2_format *fmt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
-	int ret = vidioc_try_fmt_sliced_vbi_out(file, fh, fmt);
-
-	if (ret)
-		return ret;
-	if (vb2_is_busy(&dev->vb_vbi_out_q))
-		return -EBUSY;
-	dev->service_set_out = vbi->service_set;
-	dev->stream_sliced_vbi_out = true;
-	dev->vbi_out_dev.queue->type = V4L2_BUF_TYPE_SLICED_VBI_OUTPUT;
-	return 0;
-}
-
-void vivid_sliced_vbi_out_process(struct vivid_dev *dev,
-		struct vivid_buffer *buf)
-{
-	struct v4l2_sliced_vbi_data *vbi =
-		vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
-	unsigned elems =
-		vb2_get_plane_payload(&buf->vb.vb2_buf, 0) / sizeof(*vbi);
-
-	dev->vbi_out_have_cc[0] = false;
-	dev->vbi_out_have_cc[1] = false;
-	dev->vbi_out_have_wss = false;
-	while (elems--) {
-		switch (vbi->id) {
-		case V4L2_SLICED_CAPTION_525:
-			if ((dev->std_out & V4L2_STD_525_60) && vbi->line == 21) {
-				dev->vbi_out_have_cc[!!vbi->field] = true;
-				dev->vbi_out_cc[!!vbi->field][0] = vbi->data[0];
-				dev->vbi_out_cc[!!vbi->field][1] = vbi->data[1];
-			}
-			break;
-		case V4L2_SLICED_WSS_625:
-			if ((dev->std_out & V4L2_STD_625_50) &&
-			    vbi->field == 0 && vbi->line == 23) {
-				dev->vbi_out_have_wss = true;
-				dev->vbi_out_wss[0] = vbi->data[0];
-				dev->vbi_out_wss[1] = vbi->data[1];
-			}
-			break;
-		}
-		vbi++;
-	}
-}
diff --git a/drivers/media/platform/vivid/vivid-vbi-out.h b/drivers/media/platform/vivid/vivid-vbi-out.h
deleted file mode 100644
index 76584940cdaf..000000000000
--- a/drivers/media/platform/vivid/vivid-vbi-out.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-vbi-out.h - vbi output support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_VBI_OUT_H_
-#define _VIVID_VBI_OUT_H_
-
-void vivid_sliced_vbi_out_process(struct vivid_dev *dev, struct vivid_buffer *buf);
-int vidioc_g_fmt_vbi_out(struct file *file, void *priv,
-					struct v4l2_format *f);
-int vidioc_s_fmt_vbi_out(struct file *file, void *priv,
-					struct v4l2_format *f);
-int vidioc_g_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt);
-int vidioc_try_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt);
-int vidioc_s_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt);
-
-extern const struct vb2_ops vivid_vbi_out_qops;
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c
deleted file mode 100644
index e94beef008c8..000000000000
--- a/drivers/media/platform/vivid/vivid-vid-cap.c
+++ /dev/null
@@ -1,1918 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-vid-cap.c - video capture support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/vmalloc.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-dv-timings.h>
-#include <media/v4l2-rect.h>
-
-#include "vivid-core.h"
-#include "vivid-vid-common.h"
-#include "vivid-kthread-cap.h"
-#include "vivid-vid-cap.h"
-
-static const struct vivid_fmt formats_ovl[] = {
-	{
-		.fourcc   = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_XRGB555, /* gggbbbbb arrrrrgg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_ARGB555, /* gggbbbbb arrrrrgg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-};
-
-/* The number of discrete webcam framesizes */
-#define VIVID_WEBCAM_SIZES 6
-/* The number of discrete webcam frameintervals */
-#define VIVID_WEBCAM_IVALS (VIVID_WEBCAM_SIZES * 2)
-
-/* Sizes must be in increasing order */
-static const struct v4l2_frmsize_discrete webcam_sizes[VIVID_WEBCAM_SIZES] = {
-	{  320, 180 },
-	{  640, 360 },
-	{  640, 480 },
-	{ 1280, 720 },
-	{ 1920, 1080 },
-	{ 3840, 2160 },
-};
-
-/*
- * Intervals must be in increasing order and there must be twice as many
- * elements in this array as there are in webcam_sizes.
- */
-static const struct v4l2_fract webcam_intervals[VIVID_WEBCAM_IVALS] = {
-	{  1, 1 },
-	{  1, 2 },
-	{  1, 4 },
-	{  1, 5 },
-	{  1, 10 },
-	{  2, 25 },
-	{  1, 15 },
-	{  1, 25 },
-	{  1, 30 },
-	{  1, 40 },
-	{  1, 50 },
-	{  1, 60 },
-};
-
-static int vid_cap_queue_setup(struct vb2_queue *vq,
-		       unsigned *nbuffers, unsigned *nplanes,
-		       unsigned sizes[], struct device *alloc_devs[])
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	unsigned buffers = tpg_g_buffers(&dev->tpg);
-	unsigned h = dev->fmt_cap_rect.height;
-	unsigned p;
-
-	if (dev->field_cap == V4L2_FIELD_ALTERNATE) {
-		/*
-		 * You cannot use read() with FIELD_ALTERNATE since the field
-		 * information (TOP/BOTTOM) cannot be passed back to the user.
-		 */
-		if (vb2_fileio_is_active(vq))
-			return -EINVAL;
-	}
-
-	if (dev->queue_setup_error) {
-		/*
-		 * Error injection: test what happens if queue_setup() returns
-		 * an error.
-		 */
-		dev->queue_setup_error = false;
-		return -EINVAL;
-	}
-	if (*nplanes) {
-		/*
-		 * Check if the number of requested planes match
-		 * the number of buffers in the current format. You can't mix that.
-		 */
-		if (*nplanes != buffers)
-			return -EINVAL;
-		for (p = 0; p < buffers; p++) {
-			if (sizes[p] < tpg_g_line_width(&dev->tpg, p) * h +
-						dev->fmt_cap->data_offset[p])
-				return -EINVAL;
-		}
-	} else {
-		for (p = 0; p < buffers; p++)
-			sizes[p] = (tpg_g_line_width(&dev->tpg, p) * h) /
-					dev->fmt_cap->vdownsampling[p] +
-					dev->fmt_cap->data_offset[p];
-	}
-
-	if (vq->num_buffers + *nbuffers < 2)
-		*nbuffers = 2 - vq->num_buffers;
-
-	*nplanes = buffers;
-
-	dprintk(dev, 1, "%s: count=%d\n", __func__, *nbuffers);
-	for (p = 0; p < buffers; p++)
-		dprintk(dev, 1, "%s: size[%u]=%u\n", __func__, p, sizes[p]);
-
-	return 0;
-}
-
-static int vid_cap_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	unsigned long size;
-	unsigned buffers = tpg_g_buffers(&dev->tpg);
-	unsigned p;
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (WARN_ON(NULL == dev->fmt_cap))
-		return -EINVAL;
-
-	if (dev->buf_prepare_error) {
-		/*
-		 * Error injection: test what happens if buf_prepare() returns
-		 * an error.
-		 */
-		dev->buf_prepare_error = false;
-		return -EINVAL;
-	}
-	for (p = 0; p < buffers; p++) {
-		size = (tpg_g_line_width(&dev->tpg, p) *
-			dev->fmt_cap_rect.height) /
-			dev->fmt_cap->vdownsampling[p] +
-			dev->fmt_cap->data_offset[p];
-
-		if (vb2_plane_size(vb, p) < size) {
-			dprintk(dev, 1, "%s data will not fit into plane %u (%lu < %lu)\n",
-					__func__, p, vb2_plane_size(vb, p), size);
-			return -EINVAL;
-		}
-
-		vb2_set_plane_payload(vb, p, size);
-		vb->planes[p].data_offset = dev->fmt_cap->data_offset[p];
-	}
-
-	return 0;
-}
-
-static void vid_cap_buf_finish(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct v4l2_timecode *tc = &vbuf->timecode;
-	unsigned fps = 25;
-	unsigned seq = vbuf->sequence;
-
-	if (!vivid_is_sdtv_cap(dev))
-		return;
-
-	/*
-	 * Set the timecode. Rarely used, so it is interesting to
-	 * test this.
-	 */
-	vbuf->flags |= V4L2_BUF_FLAG_TIMECODE;
-	if (dev->std_cap[dev->input] & V4L2_STD_525_60)
-		fps = 30;
-	tc->type = (fps == 30) ? V4L2_TC_TYPE_30FPS : V4L2_TC_TYPE_25FPS;
-	tc->flags = 0;
-	tc->frames = seq % fps;
-	tc->seconds = (seq / fps) % 60;
-	tc->minutes = (seq / (60 * fps)) % 60;
-	tc->hours = (seq / (60 * 60 * fps)) % 24;
-}
-
-static void vid_cap_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	spin_lock(&dev->slock);
-	list_add_tail(&buf->list, &dev->vid_cap_active);
-	spin_unlock(&dev->slock);
-}
-
-static int vid_cap_start_streaming(struct vb2_queue *vq, unsigned count)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	unsigned i;
-	int err;
-
-	if (vb2_is_streaming(&dev->vb_vid_out_q))
-		dev->can_loop_video = vivid_vid_can_loop(dev);
-
-	dev->vid_cap_seq_count = 0;
-	dprintk(dev, 1, "%s\n", __func__);
-	for (i = 0; i < VIDEO_MAX_FRAME; i++)
-		dev->must_blank[i] = tpg_g_perc_fill(&dev->tpg) < 100;
-	if (dev->start_streaming_error) {
-		dev->start_streaming_error = false;
-		err = -EINVAL;
-	} else {
-		err = vivid_start_generating_vid_cap(dev, &dev->vid_cap_streaming);
-	}
-	if (err) {
-		struct vivid_buffer *buf, *tmp;
-
-		list_for_each_entry_safe(buf, tmp, &dev->vid_cap_active, list) {
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf,
-					VB2_BUF_STATE_QUEUED);
-		}
-	}
-	return err;
-}
-
-/* abort streaming and wait for last buffer */
-static void vid_cap_stop_streaming(struct vb2_queue *vq)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-
-	dprintk(dev, 1, "%s\n", __func__);
-	vivid_stop_generating_vid_cap(dev, &dev->vid_cap_streaming);
-	dev->can_loop_video = false;
-}
-
-static void vid_cap_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_vid_cap);
-}
-
-const struct vb2_ops vivid_vid_cap_qops = {
-	.queue_setup		= vid_cap_queue_setup,
-	.buf_prepare		= vid_cap_buf_prepare,
-	.buf_finish		= vid_cap_buf_finish,
-	.buf_queue		= vid_cap_buf_queue,
-	.start_streaming	= vid_cap_start_streaming,
-	.stop_streaming		= vid_cap_stop_streaming,
-	.buf_request_complete	= vid_cap_buf_request_complete,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
-};
-
-/*
- * Determine the 'picture' quality based on the current TV frequency: either
- * COLOR for a good 'signal', GRAY (grayscale picture) for a slightly off
- * signal or NOISE for no signal.
- */
-void vivid_update_quality(struct vivid_dev *dev)
-{
-	unsigned freq_modulus;
-
-	if (dev->loop_video && (vivid_is_svid_cap(dev) || vivid_is_hdmi_cap(dev))) {
-		/*
-		 * The 'noise' will only be replaced by the actual video
-		 * if the output video matches the input video settings.
-		 */
-		tpg_s_quality(&dev->tpg, TPG_QUAL_NOISE, 0);
-		return;
-	}
-	if (vivid_is_hdmi_cap(dev) &&
-	    VIVID_INVALID_SIGNAL(dev->dv_timings_signal_mode[dev->input])) {
-		tpg_s_quality(&dev->tpg, TPG_QUAL_NOISE, 0);
-		return;
-	}
-	if (vivid_is_sdtv_cap(dev) &&
-	    VIVID_INVALID_SIGNAL(dev->std_signal_mode[dev->input])) {
-		tpg_s_quality(&dev->tpg, TPG_QUAL_NOISE, 0);
-		return;
-	}
-	if (!vivid_is_tv_cap(dev)) {
-		tpg_s_quality(&dev->tpg, TPG_QUAL_COLOR, 0);
-		return;
-	}
-
-	/*
-	 * There is a fake channel every 6 MHz at 49.25, 55.25, etc.
-	 * From +/- 0.25 MHz around the channel there is color, and from
-	 * +/- 1 MHz there is grayscale (chroma is lost).
-	 * Everywhere else it is just noise.
-	 */
-	freq_modulus = (dev->tv_freq - 676 /* (43.25-1) * 16 */) % (6 * 16);
-	if (freq_modulus > 2 * 16) {
-		tpg_s_quality(&dev->tpg, TPG_QUAL_NOISE,
-			next_pseudo_random32(dev->tv_freq ^ 0x55) & 0x3f);
-		return;
-	}
-	if (freq_modulus < 12 /*0.75 * 16*/ || freq_modulus > 20 /*1.25 * 16*/)
-		tpg_s_quality(&dev->tpg, TPG_QUAL_GRAY, 0);
-	else
-		tpg_s_quality(&dev->tpg, TPG_QUAL_COLOR, 0);
-}
-
-/*
- * Get the current picture quality and the associated afc value.
- */
-static enum tpg_quality vivid_get_quality(struct vivid_dev *dev, s32 *afc)
-{
-	unsigned freq_modulus;
-
-	if (afc)
-		*afc = 0;
-	if (tpg_g_quality(&dev->tpg) == TPG_QUAL_COLOR ||
-	    tpg_g_quality(&dev->tpg) == TPG_QUAL_NOISE)
-		return tpg_g_quality(&dev->tpg);
-
-	/*
-	 * There is a fake channel every 6 MHz at 49.25, 55.25, etc.
-	 * From +/- 0.25 MHz around the channel there is color, and from
-	 * +/- 1 MHz there is grayscale (chroma is lost).
-	 * Everywhere else it is just gray.
-	 */
-	freq_modulus = (dev->tv_freq - 676 /* (43.25-1) * 16 */) % (6 * 16);
-	if (afc)
-		*afc = freq_modulus - 1 * 16;
-	return TPG_QUAL_GRAY;
-}
-
-enum tpg_video_aspect vivid_get_video_aspect(const struct vivid_dev *dev)
-{
-	if (vivid_is_sdtv_cap(dev))
-		return dev->std_aspect_ratio[dev->input];
-
-	if (vivid_is_hdmi_cap(dev))
-		return dev->dv_timings_aspect_ratio[dev->input];
-
-	return TPG_VIDEO_ASPECT_IMAGE;
-}
-
-static enum tpg_pixel_aspect vivid_get_pixel_aspect(const struct vivid_dev *dev)
-{
-	if (vivid_is_sdtv_cap(dev))
-		return (dev->std_cap[dev->input] & V4L2_STD_525_60) ?
-			TPG_PIXEL_ASPECT_NTSC : TPG_PIXEL_ASPECT_PAL;
-
-	if (vivid_is_hdmi_cap(dev) &&
-	    dev->src_rect.width == 720 && dev->src_rect.height <= 576)
-		return dev->src_rect.height == 480 ?
-			TPG_PIXEL_ASPECT_NTSC : TPG_PIXEL_ASPECT_PAL;
-
-	return TPG_PIXEL_ASPECT_SQUARE;
-}
-
-/*
- * Called whenever the format has to be reset which can occur when
- * changing inputs, standard, timings, etc.
- */
-void vivid_update_format_cap(struct vivid_dev *dev, bool keep_controls)
-{
-	struct v4l2_bt_timings *bt = &dev->dv_timings_cap[dev->input].bt;
-	unsigned size;
-	u64 pixelclock;
-
-	switch (dev->input_type[dev->input]) {
-	case WEBCAM:
-	default:
-		dev->src_rect.width = webcam_sizes[dev->webcam_size_idx].width;
-		dev->src_rect.height = webcam_sizes[dev->webcam_size_idx].height;
-		dev->timeperframe_vid_cap = webcam_intervals[dev->webcam_ival_idx];
-		dev->field_cap = V4L2_FIELD_NONE;
-		tpg_s_rgb_range(&dev->tpg, V4L2_DV_RGB_RANGE_AUTO);
-		break;
-	case TV:
-	case SVID:
-		dev->field_cap = dev->tv_field_cap;
-		dev->src_rect.width = 720;
-		if (dev->std_cap[dev->input] & V4L2_STD_525_60) {
-			dev->src_rect.height = 480;
-			dev->timeperframe_vid_cap = (struct v4l2_fract) { 1001, 30000 };
-			dev->service_set_cap = V4L2_SLICED_CAPTION_525;
-		} else {
-			dev->src_rect.height = 576;
-			dev->timeperframe_vid_cap = (struct v4l2_fract) { 1000, 25000 };
-			dev->service_set_cap = V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
-		}
-		tpg_s_rgb_range(&dev->tpg, V4L2_DV_RGB_RANGE_AUTO);
-		break;
-	case HDMI:
-		dev->src_rect.width = bt->width;
-		dev->src_rect.height = bt->height;
-		size = V4L2_DV_BT_FRAME_WIDTH(bt) * V4L2_DV_BT_FRAME_HEIGHT(bt);
-		if (dev->reduced_fps && can_reduce_fps(bt)) {
-			pixelclock = div_u64(bt->pixelclock * 1000, 1001);
-			bt->flags |= V4L2_DV_FL_REDUCED_FPS;
-		} else {
-			pixelclock = bt->pixelclock;
-			bt->flags &= ~V4L2_DV_FL_REDUCED_FPS;
-		}
-		dev->timeperframe_vid_cap = (struct v4l2_fract) {
-			size / 100, (u32)pixelclock / 100
-		};
-		if (bt->interlaced)
-			dev->field_cap = V4L2_FIELD_ALTERNATE;
-		else
-			dev->field_cap = V4L2_FIELD_NONE;
-
-		/*
-		 * We can be called from within s_ctrl, in that case we can't
-		 * set/get controls. Luckily we don't need to in that case.
-		 */
-		if (keep_controls || !dev->colorspace)
-			break;
-		if (bt->flags & V4L2_DV_FL_IS_CE_VIDEO) {
-			if (bt->width == 720 && bt->height <= 576)
-				v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_170M);
-			else
-				v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_709);
-			v4l2_ctrl_s_ctrl(dev->real_rgb_range_cap, 1);
-		} else {
-			v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_SRGB);
-			v4l2_ctrl_s_ctrl(dev->real_rgb_range_cap, 0);
-		}
-		tpg_s_rgb_range(&dev->tpg, v4l2_ctrl_g_ctrl(dev->rgb_range_cap));
-		break;
-	}
-	vfree(dev->bitmap_cap);
-	dev->bitmap_cap = NULL;
-	vivid_update_quality(dev);
-	tpg_reset_source(&dev->tpg, dev->src_rect.width, dev->src_rect.height, dev->field_cap);
-	dev->crop_cap = dev->src_rect;
-	dev->crop_bounds_cap = dev->src_rect;
-	dev->compose_cap = dev->crop_cap;
-	if (V4L2_FIELD_HAS_T_OR_B(dev->field_cap))
-		dev->compose_cap.height /= 2;
-	dev->fmt_cap_rect = dev->compose_cap;
-	tpg_s_video_aspect(&dev->tpg, vivid_get_video_aspect(dev));
-	tpg_s_pixel_aspect(&dev->tpg, vivid_get_pixel_aspect(dev));
-	tpg_update_mv_step(&dev->tpg);
-}
-
-/* Map the field to something that is valid for the current input */
-static enum v4l2_field vivid_field_cap(struct vivid_dev *dev, enum v4l2_field field)
-{
-	if (vivid_is_sdtv_cap(dev)) {
-		switch (field) {
-		case V4L2_FIELD_INTERLACED_TB:
-		case V4L2_FIELD_INTERLACED_BT:
-		case V4L2_FIELD_SEQ_TB:
-		case V4L2_FIELD_SEQ_BT:
-		case V4L2_FIELD_TOP:
-		case V4L2_FIELD_BOTTOM:
-		case V4L2_FIELD_ALTERNATE:
-			return field;
-		case V4L2_FIELD_INTERLACED:
-		default:
-			return V4L2_FIELD_INTERLACED;
-		}
-	}
-	if (vivid_is_hdmi_cap(dev))
-		return dev->dv_timings_cap[dev->input].bt.interlaced ?
-			V4L2_FIELD_ALTERNATE : V4L2_FIELD_NONE;
-	return V4L2_FIELD_NONE;
-}
-
-static unsigned vivid_colorspace_cap(struct vivid_dev *dev)
-{
-	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
-		return tpg_g_colorspace(&dev->tpg);
-	return dev->colorspace_out;
-}
-
-static unsigned vivid_xfer_func_cap(struct vivid_dev *dev)
-{
-	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
-		return tpg_g_xfer_func(&dev->tpg);
-	return dev->xfer_func_out;
-}
-
-static unsigned vivid_ycbcr_enc_cap(struct vivid_dev *dev)
-{
-	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
-		return tpg_g_ycbcr_enc(&dev->tpg);
-	return dev->ycbcr_enc_out;
-}
-
-static unsigned int vivid_hsv_enc_cap(struct vivid_dev *dev)
-{
-	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
-		return tpg_g_hsv_enc(&dev->tpg);
-	return dev->hsv_enc_out;
-}
-
-static unsigned vivid_quantization_cap(struct vivid_dev *dev)
-{
-	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
-		return tpg_g_quantization(&dev->tpg);
-	return dev->quantization_out;
-}
-
-int vivid_g_fmt_vid_cap(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
-	unsigned p;
-
-	mp->width        = dev->fmt_cap_rect.width;
-	mp->height       = dev->fmt_cap_rect.height;
-	mp->field        = dev->field_cap;
-	mp->pixelformat  = dev->fmt_cap->fourcc;
-	mp->colorspace   = vivid_colorspace_cap(dev);
-	mp->xfer_func    = vivid_xfer_func_cap(dev);
-	if (dev->fmt_cap->color_enc == TGP_COLOR_ENC_HSV)
-		mp->hsv_enc    = vivid_hsv_enc_cap(dev);
-	else
-		mp->ycbcr_enc    = vivid_ycbcr_enc_cap(dev);
-	mp->quantization = vivid_quantization_cap(dev);
-	mp->num_planes = dev->fmt_cap->buffers;
-	for (p = 0; p < mp->num_planes; p++) {
-		mp->plane_fmt[p].bytesperline = tpg_g_bytesperline(&dev->tpg, p);
-		mp->plane_fmt[p].sizeimage =
-			(tpg_g_line_width(&dev->tpg, p) * mp->height) /
-			dev->fmt_cap->vdownsampling[p] +
-			dev->fmt_cap->data_offset[p];
-	}
-	return 0;
-}
-
-int vivid_try_fmt_vid_cap(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
-	struct v4l2_plane_pix_format *pfmt = mp->plane_fmt;
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct vivid_fmt *fmt;
-	unsigned bytesperline, max_bpl;
-	unsigned factor = 1;
-	unsigned w, h;
-	unsigned p;
-
-	fmt = vivid_get_format(dev, mp->pixelformat);
-	if (!fmt) {
-		dprintk(dev, 1, "Fourcc format (0x%08x) unknown.\n",
-			mp->pixelformat);
-		mp->pixelformat = V4L2_PIX_FMT_YUYV;
-		fmt = vivid_get_format(dev, mp->pixelformat);
-	}
-
-	mp->field = vivid_field_cap(dev, mp->field);
-	if (vivid_is_webcam(dev)) {
-		const struct v4l2_frmsize_discrete *sz =
-			v4l2_find_nearest_size(webcam_sizes,
-					       VIVID_WEBCAM_SIZES, width,
-					       height, mp->width, mp->height);
-
-		w = sz->width;
-		h = sz->height;
-	} else if (vivid_is_sdtv_cap(dev)) {
-		w = 720;
-		h = (dev->std_cap[dev->input] & V4L2_STD_525_60) ? 480 : 576;
-	} else {
-		w = dev->src_rect.width;
-		h = dev->src_rect.height;
-	}
-	if (V4L2_FIELD_HAS_T_OR_B(mp->field))
-		factor = 2;
-	if (vivid_is_webcam(dev) ||
-	    (!dev->has_scaler_cap && !dev->has_crop_cap && !dev->has_compose_cap)) {
-		mp->width = w;
-		mp->height = h / factor;
-	} else {
-		struct v4l2_rect r = { 0, 0, mp->width, mp->height * factor };
-
-		v4l2_rect_set_min_size(&r, &vivid_min_rect);
-		v4l2_rect_set_max_size(&r, &vivid_max_rect);
-		if (dev->has_scaler_cap && !dev->has_compose_cap) {
-			struct v4l2_rect max_r = { 0, 0, MAX_ZOOM * w, MAX_ZOOM * h };
-
-			v4l2_rect_set_max_size(&r, &max_r);
-		} else if (!dev->has_scaler_cap && dev->has_crop_cap && !dev->has_compose_cap) {
-			v4l2_rect_set_max_size(&r, &dev->src_rect);
-		} else if (!dev->has_scaler_cap && !dev->has_crop_cap) {
-			v4l2_rect_set_min_size(&r, &dev->src_rect);
-		}
-		mp->width = r.width;
-		mp->height = r.height / factor;
-	}
-
-	/* This driver supports custom bytesperline values */
-
-	mp->num_planes = fmt->buffers;
-	for (p = 0; p < fmt->buffers; p++) {
-		/* Calculate the minimum supported bytesperline value */
-		bytesperline = (mp->width * fmt->bit_depth[p]) >> 3;
-		/* Calculate the maximum supported bytesperline value */
-		max_bpl = (MAX_ZOOM * MAX_WIDTH * fmt->bit_depth[p]) >> 3;
-
-		if (pfmt[p].bytesperline > max_bpl)
-			pfmt[p].bytesperline = max_bpl;
-		if (pfmt[p].bytesperline < bytesperline)
-			pfmt[p].bytesperline = bytesperline;
-
-		pfmt[p].sizeimage = (pfmt[p].bytesperline * mp->height) /
-				fmt->vdownsampling[p] + fmt->data_offset[p];
-
-		memset(pfmt[p].reserved, 0, sizeof(pfmt[p].reserved));
-	}
-	for (p = fmt->buffers; p < fmt->planes; p++)
-		pfmt[0].sizeimage += (pfmt[0].bytesperline * mp->height *
-			(fmt->bit_depth[p] / fmt->vdownsampling[p])) /
-			(fmt->bit_depth[0] / fmt->vdownsampling[0]);
-
-	mp->colorspace = vivid_colorspace_cap(dev);
-	if (fmt->color_enc == TGP_COLOR_ENC_HSV)
-		mp->hsv_enc = vivid_hsv_enc_cap(dev);
-	else
-		mp->ycbcr_enc = vivid_ycbcr_enc_cap(dev);
-	mp->xfer_func = vivid_xfer_func_cap(dev);
-	mp->quantization = vivid_quantization_cap(dev);
-	memset(mp->reserved, 0, sizeof(mp->reserved));
-	return 0;
-}
-
-int vivid_s_fmt_vid_cap(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_rect *crop = &dev->crop_cap;
-	struct v4l2_rect *compose = &dev->compose_cap;
-	struct vb2_queue *q = &dev->vb_vid_cap_q;
-	int ret = vivid_try_fmt_vid_cap(file, priv, f);
-	unsigned factor = 1;
-	unsigned p;
-	unsigned i;
-
-	if (ret < 0)
-		return ret;
-
-	if (vb2_is_busy(q)) {
-		dprintk(dev, 1, "%s device busy\n", __func__);
-		return -EBUSY;
-	}
-
-	if (dev->overlay_cap_owner && dev->fb_cap.fmt.pixelformat != mp->pixelformat) {
-		dprintk(dev, 1, "overlay is active, can't change pixelformat\n");
-		return -EBUSY;
-	}
-
-	dev->fmt_cap = vivid_get_format(dev, mp->pixelformat);
-	if (V4L2_FIELD_HAS_T_OR_B(mp->field))
-		factor = 2;
-
-	/* Note: the webcam input doesn't support scaling, cropping or composing */
-
-	if (!vivid_is_webcam(dev) &&
-	    (dev->has_scaler_cap || dev->has_crop_cap || dev->has_compose_cap)) {
-		struct v4l2_rect r = { 0, 0, mp->width, mp->height };
-
-		if (dev->has_scaler_cap) {
-			if (dev->has_compose_cap)
-				v4l2_rect_map_inside(compose, &r);
-			else
-				*compose = r;
-			if (dev->has_crop_cap && !dev->has_compose_cap) {
-				struct v4l2_rect min_r = {
-					0, 0,
-					r.width / MAX_ZOOM,
-					factor * r.height / MAX_ZOOM
-				};
-				struct v4l2_rect max_r = {
-					0, 0,
-					r.width * MAX_ZOOM,
-					factor * r.height * MAX_ZOOM
-				};
-
-				v4l2_rect_set_min_size(crop, &min_r);
-				v4l2_rect_set_max_size(crop, &max_r);
-				v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
-			} else if (dev->has_crop_cap) {
-				struct v4l2_rect min_r = {
-					0, 0,
-					compose->width / MAX_ZOOM,
-					factor * compose->height / MAX_ZOOM
-				};
-				struct v4l2_rect max_r = {
-					0, 0,
-					compose->width * MAX_ZOOM,
-					factor * compose->height * MAX_ZOOM
-				};
-
-				v4l2_rect_set_min_size(crop, &min_r);
-				v4l2_rect_set_max_size(crop, &max_r);
-				v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
-			}
-		} else if (dev->has_crop_cap && !dev->has_compose_cap) {
-			r.height *= factor;
-			v4l2_rect_set_size_to(crop, &r);
-			v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
-			r = *crop;
-			r.height /= factor;
-			v4l2_rect_set_size_to(compose, &r);
-		} else if (!dev->has_crop_cap) {
-			v4l2_rect_map_inside(compose, &r);
-		} else {
-			r.height *= factor;
-			v4l2_rect_set_max_size(crop, &r);
-			v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
-			compose->top *= factor;
-			compose->height *= factor;
-			v4l2_rect_set_size_to(compose, crop);
-			v4l2_rect_map_inside(compose, &r);
-			compose->top /= factor;
-			compose->height /= factor;
-		}
-	} else if (vivid_is_webcam(dev)) {
-		/* Guaranteed to be a match */
-		for (i = 0; i < ARRAY_SIZE(webcam_sizes); i++)
-			if (webcam_sizes[i].width == mp->width &&
-					webcam_sizes[i].height == mp->height)
-				break;
-		dev->webcam_size_idx = i;
-		if (dev->webcam_ival_idx >= 2 * (VIVID_WEBCAM_SIZES - i))
-			dev->webcam_ival_idx = 2 * (VIVID_WEBCAM_SIZES - i) - 1;
-		vivid_update_format_cap(dev, false);
-	} else {
-		struct v4l2_rect r = { 0, 0, mp->width, mp->height };
-
-		v4l2_rect_set_size_to(compose, &r);
-		r.height *= factor;
-		v4l2_rect_set_size_to(crop, &r);
-	}
-
-	dev->fmt_cap_rect.width = mp->width;
-	dev->fmt_cap_rect.height = mp->height;
-	tpg_s_buf_height(&dev->tpg, mp->height);
-	tpg_s_fourcc(&dev->tpg, dev->fmt_cap->fourcc);
-	for (p = 0; p < tpg_g_buffers(&dev->tpg); p++)
-		tpg_s_bytesperline(&dev->tpg, p, mp->plane_fmt[p].bytesperline);
-	dev->field_cap = mp->field;
-	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
-		tpg_s_field(&dev->tpg, V4L2_FIELD_TOP, true);
-	else
-		tpg_s_field(&dev->tpg, dev->field_cap, false);
-	tpg_s_crop_compose(&dev->tpg, &dev->crop_cap, &dev->compose_cap);
-	if (vivid_is_sdtv_cap(dev))
-		dev->tv_field_cap = mp->field;
-	tpg_update_mv_step(&dev->tpg);
-	return 0;
-}
-
-int vidioc_g_fmt_vid_cap_mplane(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!dev->multiplanar)
-		return -ENOTTY;
-	return vivid_g_fmt_vid_cap(file, priv, f);
-}
-
-int vidioc_try_fmt_vid_cap_mplane(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!dev->multiplanar)
-		return -ENOTTY;
-	return vivid_try_fmt_vid_cap(file, priv, f);
-}
-
-int vidioc_s_fmt_vid_cap_mplane(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!dev->multiplanar)
-		return -ENOTTY;
-	return vivid_s_fmt_vid_cap(file, priv, f);
-}
-
-int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-	return fmt_sp2mp_func(file, priv, f, vivid_g_fmt_vid_cap);
-}
-
-int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-	return fmt_sp2mp_func(file, priv, f, vivid_try_fmt_vid_cap);
-}
-
-int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-	return fmt_sp2mp_func(file, priv, f, vivid_s_fmt_vid_cap);
-}
-
-int vivid_vid_cap_g_selection(struct file *file, void *priv,
-			      struct v4l2_selection *sel)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!dev->has_crop_cap && !dev->has_compose_cap)
-		return -ENOTTY;
-	if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (vivid_is_webcam(dev))
-		return -ENODATA;
-
-	sel->r.left = sel->r.top = 0;
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP:
-		if (!dev->has_crop_cap)
-			return -EINVAL;
-		sel->r = dev->crop_cap;
-		break;
-	case V4L2_SEL_TGT_CROP_DEFAULT:
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		if (!dev->has_crop_cap)
-			return -EINVAL;
-		sel->r = dev->src_rect;
-		break;
-	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
-		if (!dev->has_compose_cap)
-			return -EINVAL;
-		sel->r = vivid_max_rect;
-		break;
-	case V4L2_SEL_TGT_COMPOSE:
-		if (!dev->has_compose_cap)
-			return -EINVAL;
-		sel->r = dev->compose_cap;
-		break;
-	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
-		if (!dev->has_compose_cap)
-			return -EINVAL;
-		sel->r = dev->fmt_cap_rect;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-int vivid_vid_cap_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_rect *crop = &dev->crop_cap;
-	struct v4l2_rect *compose = &dev->compose_cap;
-	unsigned factor = V4L2_FIELD_HAS_T_OR_B(dev->field_cap) ? 2 : 1;
-	int ret;
-
-	if (!dev->has_crop_cap && !dev->has_compose_cap)
-		return -ENOTTY;
-	if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (vivid_is_webcam(dev))
-		return -ENODATA;
-
-	switch (s->target) {
-	case V4L2_SEL_TGT_CROP:
-		if (!dev->has_crop_cap)
-			return -EINVAL;
-		ret = vivid_vid_adjust_sel(s->flags, &s->r);
-		if (ret)
-			return ret;
-		v4l2_rect_set_min_size(&s->r, &vivid_min_rect);
-		v4l2_rect_set_max_size(&s->r, &dev->src_rect);
-		v4l2_rect_map_inside(&s->r, &dev->crop_bounds_cap);
-		s->r.top /= factor;
-		s->r.height /= factor;
-		if (dev->has_scaler_cap) {
-			struct v4l2_rect fmt = dev->fmt_cap_rect;
-			struct v4l2_rect max_rect = {
-				0, 0,
-				s->r.width * MAX_ZOOM,
-				s->r.height * MAX_ZOOM
-			};
-			struct v4l2_rect min_rect = {
-				0, 0,
-				s->r.width / MAX_ZOOM,
-				s->r.height / MAX_ZOOM
-			};
-
-			v4l2_rect_set_min_size(&fmt, &min_rect);
-			if (!dev->has_compose_cap)
-				v4l2_rect_set_max_size(&fmt, &max_rect);
-			if (!v4l2_rect_same_size(&dev->fmt_cap_rect, &fmt) &&
-			    vb2_is_busy(&dev->vb_vid_cap_q))
-				return -EBUSY;
-			if (dev->has_compose_cap) {
-				v4l2_rect_set_min_size(compose, &min_rect);
-				v4l2_rect_set_max_size(compose, &max_rect);
-			}
-			dev->fmt_cap_rect = fmt;
-			tpg_s_buf_height(&dev->tpg, fmt.height);
-		} else if (dev->has_compose_cap) {
-			struct v4l2_rect fmt = dev->fmt_cap_rect;
-
-			v4l2_rect_set_min_size(&fmt, &s->r);
-			if (!v4l2_rect_same_size(&dev->fmt_cap_rect, &fmt) &&
-			    vb2_is_busy(&dev->vb_vid_cap_q))
-				return -EBUSY;
-			dev->fmt_cap_rect = fmt;
-			tpg_s_buf_height(&dev->tpg, fmt.height);
-			v4l2_rect_set_size_to(compose, &s->r);
-			v4l2_rect_map_inside(compose, &dev->fmt_cap_rect);
-		} else {
-			if (!v4l2_rect_same_size(&s->r, &dev->fmt_cap_rect) &&
-			    vb2_is_busy(&dev->vb_vid_cap_q))
-				return -EBUSY;
-			v4l2_rect_set_size_to(&dev->fmt_cap_rect, &s->r);
-			v4l2_rect_set_size_to(compose, &s->r);
-			v4l2_rect_map_inside(compose, &dev->fmt_cap_rect);
-			tpg_s_buf_height(&dev->tpg, dev->fmt_cap_rect.height);
-		}
-		s->r.top *= factor;
-		s->r.height *= factor;
-		*crop = s->r;
-		break;
-	case V4L2_SEL_TGT_COMPOSE:
-		if (!dev->has_compose_cap)
-			return -EINVAL;
-		ret = vivid_vid_adjust_sel(s->flags, &s->r);
-		if (ret)
-			return ret;
-		v4l2_rect_set_min_size(&s->r, &vivid_min_rect);
-		v4l2_rect_set_max_size(&s->r, &dev->fmt_cap_rect);
-		if (dev->has_scaler_cap) {
-			struct v4l2_rect max_rect = {
-				0, 0,
-				dev->src_rect.width * MAX_ZOOM,
-				(dev->src_rect.height / factor) * MAX_ZOOM
-			};
-
-			v4l2_rect_set_max_size(&s->r, &max_rect);
-			if (dev->has_crop_cap) {
-				struct v4l2_rect min_rect = {
-					0, 0,
-					s->r.width / MAX_ZOOM,
-					(s->r.height * factor) / MAX_ZOOM
-				};
-				struct v4l2_rect max_rect = {
-					0, 0,
-					s->r.width * MAX_ZOOM,
-					(s->r.height * factor) * MAX_ZOOM
-				};
-
-				v4l2_rect_set_min_size(crop, &min_rect);
-				v4l2_rect_set_max_size(crop, &max_rect);
-				v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
-			}
-		} else if (dev->has_crop_cap) {
-			s->r.top *= factor;
-			s->r.height *= factor;
-			v4l2_rect_set_max_size(&s->r, &dev->src_rect);
-			v4l2_rect_set_size_to(crop, &s->r);
-			v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
-			s->r.top /= factor;
-			s->r.height /= factor;
-		} else {
-			v4l2_rect_set_size_to(&s->r, &dev->src_rect);
-			s->r.height /= factor;
-		}
-		v4l2_rect_map_inside(&s->r, &dev->fmt_cap_rect);
-		if (dev->bitmap_cap && (compose->width != s->r.width ||
-					compose->height != s->r.height)) {
-			vfree(dev->bitmap_cap);
-			dev->bitmap_cap = NULL;
-		}
-		*compose = s->r;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	tpg_s_crop_compose(&dev->tpg, crop, compose);
-	return 0;
-}
-
-int vivid_vid_cap_g_pixelaspect(struct file *file, void *priv,
-				int type, struct v4l2_fract *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	switch (vivid_get_pixel_aspect(dev)) {
-	case TPG_PIXEL_ASPECT_NTSC:
-		f->numerator = 11;
-		f->denominator = 10;
-		break;
-	case TPG_PIXEL_ASPECT_PAL:
-		f->numerator = 54;
-		f->denominator = 59;
-		break;
-	default:
-		break;
-	}
-	return 0;
-}
-
-int vidioc_enum_fmt_vid_overlay(struct file *file, void  *priv,
-					struct v4l2_fmtdesc *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct vivid_fmt *fmt;
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-
-	if (f->index >= ARRAY_SIZE(formats_ovl))
-		return -EINVAL;
-
-	fmt = &formats_ovl[f->index];
-
-	f->pixelformat = fmt->fourcc;
-	return 0;
-}
-
-int vidioc_g_fmt_vid_overlay(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct v4l2_rect *compose = &dev->compose_cap;
-	struct v4l2_window *win = &f->fmt.win;
-	unsigned clipcount = win->clipcount;
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-
-	win->w.top = dev->overlay_cap_top;
-	win->w.left = dev->overlay_cap_left;
-	win->w.width = compose->width;
-	win->w.height = compose->height;
-	win->field = dev->overlay_cap_field;
-	win->clipcount = dev->clipcount_cap;
-	if (clipcount > dev->clipcount_cap)
-		clipcount = dev->clipcount_cap;
-	if (dev->bitmap_cap == NULL)
-		win->bitmap = NULL;
-	else if (win->bitmap) {
-		if (copy_to_user(win->bitmap, dev->bitmap_cap,
-		    ((compose->width + 7) / 8) * compose->height))
-			return -EFAULT;
-	}
-	if (clipcount && win->clips) {
-		if (copy_to_user(win->clips, dev->clips_cap,
-				 clipcount * sizeof(dev->clips_cap[0])))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-int vidioc_try_fmt_vid_overlay(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct v4l2_rect *compose = &dev->compose_cap;
-	struct v4l2_window *win = &f->fmt.win;
-	int i, j;
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-
-	win->w.left = clamp_t(int, win->w.left,
-			      -dev->fb_cap.fmt.width, dev->fb_cap.fmt.width);
-	win->w.top = clamp_t(int, win->w.top,
-			     -dev->fb_cap.fmt.height, dev->fb_cap.fmt.height);
-	win->w.width = compose->width;
-	win->w.height = compose->height;
-	if (win->field != V4L2_FIELD_BOTTOM && win->field != V4L2_FIELD_TOP)
-		win->field = V4L2_FIELD_ANY;
-	win->chromakey = 0;
-	win->global_alpha = 0;
-	if (win->clipcount && !win->clips)
-		win->clipcount = 0;
-	if (win->clipcount > MAX_CLIPS)
-		win->clipcount = MAX_CLIPS;
-	if (win->clipcount) {
-		if (copy_from_user(dev->try_clips_cap, win->clips,
-				   win->clipcount * sizeof(dev->clips_cap[0])))
-			return -EFAULT;
-		for (i = 0; i < win->clipcount; i++) {
-			struct v4l2_rect *r = &dev->try_clips_cap[i].c;
-
-			r->top = clamp_t(s32, r->top, 0, dev->fb_cap.fmt.height - 1);
-			r->height = clamp_t(s32, r->height, 1, dev->fb_cap.fmt.height - r->top);
-			r->left = clamp_t(u32, r->left, 0, dev->fb_cap.fmt.width - 1);
-			r->width = clamp_t(u32, r->width, 1, dev->fb_cap.fmt.width - r->left);
-		}
-		/*
-		 * Yeah, so sue me, it's an O(n^2) algorithm. But n is a small
-		 * number and it's typically a one-time deal.
-		 */
-		for (i = 0; i < win->clipcount - 1; i++) {
-			struct v4l2_rect *r1 = &dev->try_clips_cap[i].c;
-
-			for (j = i + 1; j < win->clipcount; j++) {
-				struct v4l2_rect *r2 = &dev->try_clips_cap[j].c;
-
-				if (v4l2_rect_overlap(r1, r2))
-					return -EINVAL;
-			}
-		}
-		if (copy_to_user(win->clips, dev->try_clips_cap,
-				 win->clipcount * sizeof(dev->clips_cap[0])))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-int vidioc_s_fmt_vid_overlay(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct v4l2_rect *compose = &dev->compose_cap;
-	struct v4l2_window *win = &f->fmt.win;
-	int ret = vidioc_try_fmt_vid_overlay(file, priv, f);
-	unsigned bitmap_size = ((compose->width + 7) / 8) * compose->height;
-	unsigned clips_size = win->clipcount * sizeof(dev->clips_cap[0]);
-	void *new_bitmap = NULL;
-
-	if (ret)
-		return ret;
-
-	if (win->bitmap) {
-		new_bitmap = vzalloc(bitmap_size);
-
-		if (new_bitmap == NULL)
-			return -ENOMEM;
-		if (copy_from_user(new_bitmap, win->bitmap, bitmap_size)) {
-			vfree(new_bitmap);
-			return -EFAULT;
-		}
-	}
-
-	dev->overlay_cap_top = win->w.top;
-	dev->overlay_cap_left = win->w.left;
-	dev->overlay_cap_field = win->field;
-	vfree(dev->bitmap_cap);
-	dev->bitmap_cap = new_bitmap;
-	dev->clipcount_cap = win->clipcount;
-	if (dev->clipcount_cap)
-		memcpy(dev->clips_cap, dev->try_clips_cap, clips_size);
-	return 0;
-}
-
-int vivid_vid_cap_overlay(struct file *file, void *fh, unsigned i)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-
-	if (i && dev->fb_vbase_cap == NULL)
-		return -EINVAL;
-
-	if (i && dev->fb_cap.fmt.pixelformat != dev->fmt_cap->fourcc) {
-		dprintk(dev, 1, "mismatch between overlay and video capture pixelformats\n");
-		return -EINVAL;
-	}
-
-	if (dev->overlay_cap_owner && dev->overlay_cap_owner != fh)
-		return -EBUSY;
-	dev->overlay_cap_owner = i ? fh : NULL;
-	return 0;
-}
-
-int vivid_vid_cap_g_fbuf(struct file *file, void *fh,
-				struct v4l2_framebuffer *a)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-
-	*a = dev->fb_cap;
-	a->capability = V4L2_FBUF_CAP_BITMAP_CLIPPING |
-			V4L2_FBUF_CAP_LIST_CLIPPING;
-	a->flags = V4L2_FBUF_FLAG_PRIMARY;
-	a->fmt.field = V4L2_FIELD_NONE;
-	a->fmt.colorspace = V4L2_COLORSPACE_SRGB;
-	a->fmt.priv = 0;
-	return 0;
-}
-
-int vivid_vid_cap_s_fbuf(struct file *file, void *fh,
-				const struct v4l2_framebuffer *a)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct vivid_fmt *fmt;
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-
-	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
-		return -EPERM;
-
-	if (dev->overlay_cap_owner)
-		return -EBUSY;
-
-	if (a->base == NULL) {
-		dev->fb_cap.base = NULL;
-		dev->fb_vbase_cap = NULL;
-		return 0;
-	}
-
-	if (a->fmt.width < 48 || a->fmt.height < 32)
-		return -EINVAL;
-	fmt = vivid_get_format(dev, a->fmt.pixelformat);
-	if (!fmt || !fmt->can_do_overlay)
-		return -EINVAL;
-	if (a->fmt.bytesperline < (a->fmt.width * fmt->bit_depth[0]) / 8)
-		return -EINVAL;
-	if (a->fmt.height * a->fmt.bytesperline < a->fmt.sizeimage)
-		return -EINVAL;
-
-	dev->fb_vbase_cap = phys_to_virt((unsigned long)a->base);
-	dev->fb_cap = *a;
-	dev->overlay_cap_left = clamp_t(int, dev->overlay_cap_left,
-				    -dev->fb_cap.fmt.width, dev->fb_cap.fmt.width);
-	dev->overlay_cap_top = clamp_t(int, dev->overlay_cap_top,
-				   -dev->fb_cap.fmt.height, dev->fb_cap.fmt.height);
-	return 0;
-}
-
-static const struct v4l2_audio vivid_audio_inputs[] = {
-	{ 0, "TV", V4L2_AUDCAP_STEREO },
-	{ 1, "Line-In", V4L2_AUDCAP_STEREO },
-};
-
-int vidioc_enum_input(struct file *file, void *priv,
-				struct v4l2_input *inp)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (inp->index >= dev->num_inputs)
-		return -EINVAL;
-
-	inp->type = V4L2_INPUT_TYPE_CAMERA;
-	switch (dev->input_type[inp->index]) {
-	case WEBCAM:
-		snprintf(inp->name, sizeof(inp->name), "Webcam %u",
-				dev->input_name_counter[inp->index]);
-		inp->capabilities = 0;
-		break;
-	case TV:
-		snprintf(inp->name, sizeof(inp->name), "TV %u",
-				dev->input_name_counter[inp->index]);
-		inp->type = V4L2_INPUT_TYPE_TUNER;
-		inp->std = V4L2_STD_ALL;
-		if (dev->has_audio_inputs)
-			inp->audioset = (1 << ARRAY_SIZE(vivid_audio_inputs)) - 1;
-		inp->capabilities = V4L2_IN_CAP_STD;
-		break;
-	case SVID:
-		snprintf(inp->name, sizeof(inp->name), "S-Video %u",
-				dev->input_name_counter[inp->index]);
-		inp->std = V4L2_STD_ALL;
-		if (dev->has_audio_inputs)
-			inp->audioset = (1 << ARRAY_SIZE(vivid_audio_inputs)) - 1;
-		inp->capabilities = V4L2_IN_CAP_STD;
-		break;
-	case HDMI:
-		snprintf(inp->name, sizeof(inp->name), "HDMI %u",
-				dev->input_name_counter[inp->index]);
-		inp->capabilities = V4L2_IN_CAP_DV_TIMINGS;
-		if (dev->edid_blocks == 0 ||
-		    dev->dv_timings_signal_mode[dev->input] == NO_SIGNAL)
-			inp->status |= V4L2_IN_ST_NO_SIGNAL;
-		else if (dev->dv_timings_signal_mode[dev->input] == NO_LOCK ||
-			 dev->dv_timings_signal_mode[dev->input] == OUT_OF_RANGE)
-			inp->status |= V4L2_IN_ST_NO_H_LOCK;
-		break;
-	}
-	if (dev->sensor_hflip)
-		inp->status |= V4L2_IN_ST_HFLIP;
-	if (dev->sensor_vflip)
-		inp->status |= V4L2_IN_ST_VFLIP;
-	if (dev->input == inp->index && vivid_is_sdtv_cap(dev)) {
-		if (dev->std_signal_mode[dev->input] == NO_SIGNAL) {
-			inp->status |= V4L2_IN_ST_NO_SIGNAL;
-		} else if (dev->std_signal_mode[dev->input] == NO_LOCK) {
-			inp->status |= V4L2_IN_ST_NO_H_LOCK;
-		} else if (vivid_is_tv_cap(dev)) {
-			switch (tpg_g_quality(&dev->tpg)) {
-			case TPG_QUAL_GRAY:
-				inp->status |= V4L2_IN_ST_COLOR_KILL;
-				break;
-			case TPG_QUAL_NOISE:
-				inp->status |= V4L2_IN_ST_NO_H_LOCK;
-				break;
-			default:
-				break;
-			}
-		}
-	}
-	return 0;
-}
-
-int vidioc_g_input(struct file *file, void *priv, unsigned *i)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	*i = dev->input;
-	return 0;
-}
-
-int vidioc_s_input(struct file *file, void *priv, unsigned i)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_bt_timings *bt = &dev->dv_timings_cap[dev->input].bt;
-	unsigned brightness;
-
-	if (i >= dev->num_inputs)
-		return -EINVAL;
-
-	if (i == dev->input)
-		return 0;
-
-	if (vb2_is_busy(&dev->vb_vid_cap_q) ||
-	    vb2_is_busy(&dev->vb_vbi_cap_q) ||
-	    vb2_is_busy(&dev->vb_meta_cap_q))
-		return -EBUSY;
-
-	dev->input = i;
-	dev->vid_cap_dev.tvnorms = 0;
-	if (dev->input_type[i] == TV || dev->input_type[i] == SVID) {
-		dev->tv_audio_input = (dev->input_type[i] == TV) ? 0 : 1;
-		dev->vid_cap_dev.tvnorms = V4L2_STD_ALL;
-	}
-	dev->vbi_cap_dev.tvnorms = dev->vid_cap_dev.tvnorms;
-	dev->meta_cap_dev.tvnorms = dev->vid_cap_dev.tvnorms;
-	vivid_update_format_cap(dev, false);
-
-	if (dev->colorspace) {
-		switch (dev->input_type[i]) {
-		case WEBCAM:
-			v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_SRGB);
-			break;
-		case TV:
-		case SVID:
-			v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_170M);
-			break;
-		case HDMI:
-			if (bt->flags & V4L2_DV_FL_IS_CE_VIDEO) {
-				if (dev->src_rect.width == 720 && dev->src_rect.height <= 576)
-					v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_170M);
-				else
-					v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_709);
-			} else {
-				v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_SRGB);
-			}
-			break;
-		}
-	}
-
-	/*
-	 * Modify the brightness range depending on the input.
-	 * This makes it easy to use vivid to test if applications can
-	 * handle control range modifications and is also how this is
-	 * typically used in practice as different inputs may be hooked
-	 * up to different receivers with different control ranges.
-	 */
-	brightness = 128 * i + dev->input_brightness[i];
-	v4l2_ctrl_modify_range(dev->brightness,
-			128 * i, 255 + 128 * i, 1, 128 + 128 * i);
-	v4l2_ctrl_s_ctrl(dev->brightness, brightness);
-
-	/* Restore per-input states. */
-	v4l2_ctrl_activate(dev->ctrl_dv_timings_signal_mode,
-			   vivid_is_hdmi_cap(dev));
-	v4l2_ctrl_activate(dev->ctrl_dv_timings, vivid_is_hdmi_cap(dev) &&
-			   dev->dv_timings_signal_mode[dev->input] ==
-			   SELECTED_DV_TIMINGS);
-	v4l2_ctrl_activate(dev->ctrl_std_signal_mode, vivid_is_sdtv_cap(dev));
-	v4l2_ctrl_activate(dev->ctrl_standard, vivid_is_sdtv_cap(dev) &&
-			   dev->std_signal_mode[dev->input]);
-
-	if (vivid_is_hdmi_cap(dev)) {
-		v4l2_ctrl_s_ctrl(dev->ctrl_dv_timings_signal_mode,
-				 dev->dv_timings_signal_mode[dev->input]);
-		v4l2_ctrl_s_ctrl(dev->ctrl_dv_timings,
-				 dev->query_dv_timings[dev->input]);
-	} else if (vivid_is_sdtv_cap(dev)) {
-		v4l2_ctrl_s_ctrl(dev->ctrl_std_signal_mode,
-				 dev->std_signal_mode[dev->input]);
-		v4l2_ctrl_s_ctrl(dev->ctrl_standard,
-				 dev->std_signal_mode[dev->input]);
-	}
-
-	return 0;
-}
-
-int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *vin)
-{
-	if (vin->index >= ARRAY_SIZE(vivid_audio_inputs))
-		return -EINVAL;
-	*vin = vivid_audio_inputs[vin->index];
-	return 0;
-}
-
-int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *vin)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_sdtv_cap(dev))
-		return -EINVAL;
-	*vin = vivid_audio_inputs[dev->tv_audio_input];
-	return 0;
-}
-
-int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *vin)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_sdtv_cap(dev))
-		return -EINVAL;
-	if (vin->index >= ARRAY_SIZE(vivid_audio_inputs))
-		return -EINVAL;
-	dev->tv_audio_input = vin->index;
-	return 0;
-}
-
-int vivid_video_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (vf->tuner != 0)
-		return -EINVAL;
-	vf->frequency = dev->tv_freq;
-	return 0;
-}
-
-int vivid_video_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (vf->tuner != 0)
-		return -EINVAL;
-	dev->tv_freq = clamp_t(unsigned, vf->frequency, MIN_TV_FREQ, MAX_TV_FREQ);
-	if (vivid_is_tv_cap(dev))
-		vivid_update_quality(dev);
-	return 0;
-}
-
-int vivid_video_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (vt->index != 0)
-		return -EINVAL;
-	if (vt->audmode > V4L2_TUNER_MODE_LANG1_LANG2)
-		return -EINVAL;
-	dev->tv_audmode = vt->audmode;
-	return 0;
-}
-
-int vivid_video_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	enum tpg_quality qual;
-
-	if (vt->index != 0)
-		return -EINVAL;
-
-	vt->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO |
-			 V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
-	vt->audmode = dev->tv_audmode;
-	vt->rangelow = MIN_TV_FREQ;
-	vt->rangehigh = MAX_TV_FREQ;
-	qual = vivid_get_quality(dev, &vt->afc);
-	if (qual == TPG_QUAL_COLOR)
-		vt->signal = 0xffff;
-	else if (qual == TPG_QUAL_GRAY)
-		vt->signal = 0x8000;
-	else
-		vt->signal = 0;
-	if (qual == TPG_QUAL_NOISE) {
-		vt->rxsubchans = 0;
-	} else if (qual == TPG_QUAL_GRAY) {
-		vt->rxsubchans = V4L2_TUNER_SUB_MONO;
-	} else {
-		unsigned int channel_nr = dev->tv_freq / (6 * 16);
-		unsigned int options =
-			(dev->std_cap[dev->input] & V4L2_STD_NTSC_M) ? 4 : 3;
-
-		switch (channel_nr % options) {
-		case 0:
-			vt->rxsubchans = V4L2_TUNER_SUB_MONO;
-			break;
-		case 1:
-			vt->rxsubchans = V4L2_TUNER_SUB_STEREO;
-			break;
-		case 2:
-			if (dev->std_cap[dev->input] & V4L2_STD_NTSC_M)
-				vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_SAP;
-			else
-				vt->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-			break;
-		case 3:
-			vt->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_SAP;
-			break;
-		}
-	}
-	strscpy(vt->name, "TV Tuner", sizeof(vt->name));
-	return 0;
-}
-
-/* Must remain in sync with the vivid_ctrl_standard_strings array */
-const v4l2_std_id vivid_standard[] = {
-	V4L2_STD_NTSC_M,
-	V4L2_STD_NTSC_M_JP,
-	V4L2_STD_NTSC_M_KR,
-	V4L2_STD_NTSC_443,
-	V4L2_STD_PAL_BG | V4L2_STD_PAL_H,
-	V4L2_STD_PAL_I,
-	V4L2_STD_PAL_DK,
-	V4L2_STD_PAL_M,
-	V4L2_STD_PAL_N,
-	V4L2_STD_PAL_Nc,
-	V4L2_STD_PAL_60,
-	V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H,
-	V4L2_STD_SECAM_DK,
-	V4L2_STD_SECAM_L,
-	V4L2_STD_SECAM_LC,
-	V4L2_STD_UNKNOWN
-};
-
-/* Must remain in sync with the vivid_standard array */
-const char * const vivid_ctrl_standard_strings[] = {
-	"NTSC-M",
-	"NTSC-M-JP",
-	"NTSC-M-KR",
-	"NTSC-443",
-	"PAL-BGH",
-	"PAL-I",
-	"PAL-DK",
-	"PAL-M",
-	"PAL-N",
-	"PAL-Nc",
-	"PAL-60",
-	"SECAM-BGH",
-	"SECAM-DK",
-	"SECAM-L",
-	"SECAM-Lc",
-	NULL,
-};
-
-int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *id)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	unsigned int last = dev->query_std_last[dev->input];
-
-	if (!vivid_is_sdtv_cap(dev))
-		return -ENODATA;
-	if (dev->std_signal_mode[dev->input] == NO_SIGNAL ||
-	    dev->std_signal_mode[dev->input] == NO_LOCK) {
-		*id = V4L2_STD_UNKNOWN;
-		return 0;
-	}
-	if (vivid_is_tv_cap(dev) && tpg_g_quality(&dev->tpg) == TPG_QUAL_NOISE) {
-		*id = V4L2_STD_UNKNOWN;
-	} else if (dev->std_signal_mode[dev->input] == CURRENT_STD) {
-		*id = dev->std_cap[dev->input];
-	} else if (dev->std_signal_mode[dev->input] == SELECTED_STD) {
-		*id = dev->query_std[dev->input];
-	} else {
-		*id = vivid_standard[last];
-		dev->query_std_last[dev->input] =
-			(last + 1) % ARRAY_SIZE(vivid_standard);
-	}
-
-	return 0;
-}
-
-int vivid_vid_cap_s_std(struct file *file, void *priv, v4l2_std_id id)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_sdtv_cap(dev))
-		return -ENODATA;
-	if (dev->std_cap[dev->input] == id)
-		return 0;
-	if (vb2_is_busy(&dev->vb_vid_cap_q) || vb2_is_busy(&dev->vb_vbi_cap_q))
-		return -EBUSY;
-	dev->std_cap[dev->input] = id;
-	vivid_update_format_cap(dev, false);
-	return 0;
-}
-
-static void find_aspect_ratio(u32 width, u32 height,
-			       u32 *num, u32 *denom)
-{
-	if (!(height % 3) && ((height * 4 / 3) == width)) {
-		*num = 4;
-		*denom = 3;
-	} else if (!(height % 9) && ((height * 16 / 9) == width)) {
-		*num = 16;
-		*denom = 9;
-	} else if (!(height % 10) && ((height * 16 / 10) == width)) {
-		*num = 16;
-		*denom = 10;
-	} else if (!(height % 4) && ((height * 5 / 4) == width)) {
-		*num = 5;
-		*denom = 4;
-	} else if (!(height % 9) && ((height * 15 / 9) == width)) {
-		*num = 15;
-		*denom = 9;
-	} else { /* default to 16:9 */
-		*num = 16;
-		*denom = 9;
-	}
-}
-
-static bool valid_cvt_gtf_timings(struct v4l2_dv_timings *timings)
-{
-	struct v4l2_bt_timings *bt = &timings->bt;
-	u32 total_h_pixel;
-	u32 total_v_lines;
-	u32 h_freq;
-
-	if (!v4l2_valid_dv_timings(timings, &vivid_dv_timings_cap,
-				NULL, NULL))
-		return false;
-
-	total_h_pixel = V4L2_DV_BT_FRAME_WIDTH(bt);
-	total_v_lines = V4L2_DV_BT_FRAME_HEIGHT(bt);
-
-	h_freq = (u32)bt->pixelclock / total_h_pixel;
-
-	if (bt->standards == 0 || (bt->standards & V4L2_DV_BT_STD_CVT)) {
-		if (v4l2_detect_cvt(total_v_lines, h_freq, bt->vsync, bt->width,
-				    bt->polarities, bt->interlaced, timings))
-			return true;
-	}
-
-	if (bt->standards == 0 || (bt->standards & V4L2_DV_BT_STD_GTF)) {
-		struct v4l2_fract aspect_ratio;
-
-		find_aspect_ratio(bt->width, bt->height,
-				  &aspect_ratio.numerator,
-				  &aspect_ratio.denominator);
-		if (v4l2_detect_gtf(total_v_lines, h_freq, bt->vsync,
-				    bt->polarities, bt->interlaced,
-				    aspect_ratio, timings))
-			return true;
-	}
-	return false;
-}
-
-int vivid_vid_cap_s_dv_timings(struct file *file, void *_fh,
-				    struct v4l2_dv_timings *timings)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_hdmi_cap(dev))
-		return -ENODATA;
-	if (!v4l2_find_dv_timings_cap(timings, &vivid_dv_timings_cap,
-				      0, NULL, NULL) &&
-	    !valid_cvt_gtf_timings(timings))
-		return -EINVAL;
-
-	if (v4l2_match_dv_timings(timings, &dev->dv_timings_cap[dev->input],
-				  0, false))
-		return 0;
-	if (vb2_is_busy(&dev->vb_vid_cap_q))
-		return -EBUSY;
-
-	dev->dv_timings_cap[dev->input] = *timings;
-	vivid_update_format_cap(dev, false);
-	return 0;
-}
-
-int vidioc_query_dv_timings(struct file *file, void *_fh,
-				    struct v4l2_dv_timings *timings)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	unsigned int input = dev->input;
-	unsigned int last = dev->query_dv_timings_last[input];
-
-	if (!vivid_is_hdmi_cap(dev))
-		return -ENODATA;
-	if (dev->dv_timings_signal_mode[input] == NO_SIGNAL ||
-	    dev->edid_blocks == 0)
-		return -ENOLINK;
-	if (dev->dv_timings_signal_mode[input] == NO_LOCK)
-		return -ENOLCK;
-	if (dev->dv_timings_signal_mode[input] == OUT_OF_RANGE) {
-		timings->bt.pixelclock = vivid_dv_timings_cap.bt.max_pixelclock * 2;
-		return -ERANGE;
-	}
-	if (dev->dv_timings_signal_mode[input] == CURRENT_DV_TIMINGS) {
-		*timings = dev->dv_timings_cap[input];
-	} else if (dev->dv_timings_signal_mode[input] ==
-		   SELECTED_DV_TIMINGS) {
-		*timings =
-			v4l2_dv_timings_presets[dev->query_dv_timings[input]];
-	} else {
-		*timings =
-			v4l2_dv_timings_presets[last];
-		dev->query_dv_timings_last[input] =
-			(last + 1) % dev->query_dv_timings_size;
-	}
-	return 0;
-}
-
-int vidioc_s_edid(struct file *file, void *_fh,
-			 struct v4l2_edid *edid)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	u16 phys_addr;
-	u32 display_present = 0;
-	unsigned int i, j;
-	int ret;
-
-	memset(edid->reserved, 0, sizeof(edid->reserved));
-	if (edid->pad >= dev->num_inputs)
-		return -EINVAL;
-	if (dev->input_type[edid->pad] != HDMI || edid->start_block)
-		return -EINVAL;
-	if (edid->blocks == 0) {
-		dev->edid_blocks = 0;
-		v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, 0);
-		v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, 0);
-		phys_addr = CEC_PHYS_ADDR_INVALID;
-		goto set_phys_addr;
-	}
-	if (edid->blocks > dev->edid_max_blocks) {
-		edid->blocks = dev->edid_max_blocks;
-		return -E2BIG;
-	}
-	phys_addr = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL);
-	ret = v4l2_phys_addr_validate(phys_addr, &phys_addr, NULL);
-	if (ret)
-		return ret;
-
-	if (vb2_is_busy(&dev->vb_vid_cap_q))
-		return -EBUSY;
-
-	dev->edid_blocks = edid->blocks;
-	memcpy(dev->edid, edid->edid, edid->blocks * 128);
-
-	for (i = 0, j = 0; i < dev->num_outputs; i++)
-		if (dev->output_type[i] == HDMI)
-			display_present |=
-				dev->display_present[i] << j++;
-
-	v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, display_present);
-	v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, display_present);
-
-set_phys_addr:
-	/* TODO: a proper hotplug detect cycle should be emulated here */
-	cec_s_phys_addr(dev->cec_rx_adap, phys_addr, false);
-
-	for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++)
-		cec_s_phys_addr(dev->cec_tx_adap[i],
-				dev->display_present[i] ?
-				v4l2_phys_addr_for_input(phys_addr, i + 1) :
-				CEC_PHYS_ADDR_INVALID,
-				false);
-	return 0;
-}
-
-int vidioc_enum_framesizes(struct file *file, void *fh,
-					 struct v4l2_frmsizeenum *fsize)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_webcam(dev) && !dev->has_scaler_cap)
-		return -EINVAL;
-	if (vivid_get_format(dev, fsize->pixel_format) == NULL)
-		return -EINVAL;
-	if (vivid_is_webcam(dev)) {
-		if (fsize->index >= ARRAY_SIZE(webcam_sizes))
-			return -EINVAL;
-		fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
-		fsize->discrete = webcam_sizes[fsize->index];
-		return 0;
-	}
-	if (fsize->index)
-		return -EINVAL;
-	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
-	fsize->stepwise.min_width = MIN_WIDTH;
-	fsize->stepwise.max_width = MAX_WIDTH * MAX_ZOOM;
-	fsize->stepwise.step_width = 2;
-	fsize->stepwise.min_height = MIN_HEIGHT;
-	fsize->stepwise.max_height = MAX_HEIGHT * MAX_ZOOM;
-	fsize->stepwise.step_height = 2;
-	return 0;
-}
-
-/* timeperframe is arbitrary and continuous */
-int vidioc_enum_frameintervals(struct file *file, void *priv,
-					     struct v4l2_frmivalenum *fival)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct vivid_fmt *fmt;
-	int i;
-
-	fmt = vivid_get_format(dev, fival->pixel_format);
-	if (!fmt)
-		return -EINVAL;
-
-	if (!vivid_is_webcam(dev)) {
-		if (fival->index)
-			return -EINVAL;
-		if (fival->width < MIN_WIDTH || fival->width > MAX_WIDTH * MAX_ZOOM)
-			return -EINVAL;
-		if (fival->height < MIN_HEIGHT || fival->height > MAX_HEIGHT * MAX_ZOOM)
-			return -EINVAL;
-		fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
-		fival->discrete = dev->timeperframe_vid_cap;
-		return 0;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(webcam_sizes); i++)
-		if (fival->width == webcam_sizes[i].width &&
-		    fival->height == webcam_sizes[i].height)
-			break;
-	if (i == ARRAY_SIZE(webcam_sizes))
-		return -EINVAL;
-	if (fival->index >= 2 * (VIVID_WEBCAM_SIZES - i))
-		return -EINVAL;
-	fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
-	fival->discrete = webcam_intervals[fival->index];
-	return 0;
-}
-
-int vivid_vid_cap_g_parm(struct file *file, void *priv,
-			  struct v4l2_streamparm *parm)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (parm->type != (dev->multiplanar ?
-			   V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :
-			   V4L2_BUF_TYPE_VIDEO_CAPTURE))
-		return -EINVAL;
-
-	parm->parm.capture.capability   = V4L2_CAP_TIMEPERFRAME;
-	parm->parm.capture.timeperframe = dev->timeperframe_vid_cap;
-	parm->parm.capture.readbuffers  = 1;
-	return 0;
-}
-
-int vivid_vid_cap_s_parm(struct file *file, void *priv,
-			  struct v4l2_streamparm *parm)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	unsigned ival_sz = 2 * (VIVID_WEBCAM_SIZES - dev->webcam_size_idx);
-	struct v4l2_fract tpf;
-	unsigned i;
-
-	if (parm->type != (dev->multiplanar ?
-			   V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :
-			   V4L2_BUF_TYPE_VIDEO_CAPTURE))
-		return -EINVAL;
-	if (!vivid_is_webcam(dev))
-		return vivid_vid_cap_g_parm(file, priv, parm);
-
-	tpf = parm->parm.capture.timeperframe;
-
-	if (tpf.denominator == 0)
-		tpf = webcam_intervals[ival_sz - 1];
-	for (i = 0; i < ival_sz; i++)
-		if (V4L2_FRACT_COMPARE(tpf, >=, webcam_intervals[i]))
-			break;
-	if (i == ival_sz)
-		i = ival_sz - 1;
-	dev->webcam_ival_idx = i;
-	tpf = webcam_intervals[dev->webcam_ival_idx];
-
-	/* resync the thread's timings */
-	dev->cap_seq_resync = true;
-	dev->timeperframe_vid_cap = tpf;
-	parm->parm.capture.capability   = V4L2_CAP_TIMEPERFRAME;
-	parm->parm.capture.timeperframe = tpf;
-	parm->parm.capture.readbuffers  = 1;
-	return 0;
-}
diff --git a/drivers/media/platform/vivid/vivid-vid-cap.h b/drivers/media/platform/vivid/vivid-vid-cap.h
deleted file mode 100644
index 1e422a59eeab..000000000000
--- a/drivers/media/platform/vivid/vivid-vid-cap.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-vid-cap.h - video capture support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_VID_CAP_H_
-#define _VIVID_VID_CAP_H_
-
-void vivid_update_quality(struct vivid_dev *dev);
-void vivid_update_format_cap(struct vivid_dev *dev, bool keep_controls);
-enum tpg_video_aspect vivid_get_video_aspect(const struct vivid_dev *dev);
-
-extern const v4l2_std_id vivid_standard[];
-extern const char * const vivid_ctrl_standard_strings[];
-
-extern const struct vb2_ops vivid_vid_cap_qops;
-
-int vivid_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_g_fmt_vid_cap_mplane(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_try_fmt_vid_cap_mplane(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_s_fmt_vid_cap_mplane(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_vid_cap_g_selection(struct file *file, void *priv, struct v4l2_selection *sel);
-int vivid_vid_cap_s_selection(struct file *file, void *fh, struct v4l2_selection *s);
-int vivid_vid_cap_g_pixelaspect(struct file *file, void *priv, int type, struct v4l2_fract *f);
-int vidioc_enum_fmt_vid_overlay(struct file *file, void  *priv, struct v4l2_fmtdesc *f);
-int vidioc_g_fmt_vid_overlay(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_try_fmt_vid_overlay(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_s_fmt_vid_overlay(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_vid_cap_overlay(struct file *file, void *fh, unsigned i);
-int vivid_vid_cap_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *a);
-int vivid_vid_cap_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *a);
-int vidioc_enum_input(struct file *file, void *priv, struct v4l2_input *inp);
-int vidioc_g_input(struct file *file, void *priv, unsigned *i);
-int vidioc_s_input(struct file *file, void *priv, unsigned i);
-int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *vin);
-int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *vin);
-int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *vin);
-int vivid_video_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf);
-int vivid_video_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf);
-int vivid_video_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt);
-int vivid_video_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt);
-int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *id);
-int vivid_vid_cap_s_std(struct file *file, void *priv, v4l2_std_id id);
-int vivid_vid_cap_s_dv_timings(struct file *file, void *_fh, struct v4l2_dv_timings *timings);
-int vidioc_query_dv_timings(struct file *file, void *_fh, struct v4l2_dv_timings *timings);
-int vidioc_s_edid(struct file *file, void *_fh, struct v4l2_edid *edid);
-int vidioc_enum_framesizes(struct file *file, void *fh, struct v4l2_frmsizeenum *fsize);
-int vidioc_enum_frameintervals(struct file *file, void *priv, struct v4l2_frmivalenum *fival);
-int vivid_vid_cap_g_parm(struct file *file, void *priv, struct v4l2_streamparm *parm);
-int vivid_vid_cap_s_parm(struct file *file, void *priv, struct v4l2_streamparm *parm);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-vid-common.c b/drivers/media/platform/vivid/vivid-vid-common.c
deleted file mode 100644
index 76b0be670ebb..000000000000
--- a/drivers/media/platform/vivid/vivid-vid-common.c
+++ /dev/null
@@ -1,1035 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-vid-common.c - common video support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-dv-timings.h>
-
-#include "vivid-core.h"
-#include "vivid-vid-common.h"
-
-const struct v4l2_dv_timings_cap vivid_dv_timings_cap = {
-	.type = V4L2_DV_BT_656_1120,
-	/* keep this initialization for compatibility with GCC < 4.4.6 */
-	.reserved = { 0 },
-	V4L2_INIT_BT_TIMINGS(16, MAX_WIDTH, 16, MAX_HEIGHT, 14000000, 775000000,
-		V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
-		V4L2_DV_BT_STD_CVT | V4L2_DV_BT_STD_GTF,
-		V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_INTERLACED)
-};
-
-/* ------------------------------------------------------------------
-	Basic structures
-   ------------------------------------------------------------------*/
-
-struct vivid_fmt vivid_formats[] = {
-	{
-		.fourcc   = V4L2_PIX_FMT_YUYV,
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 1,
-		.buffers = 1,
-		.data_offset = { PLANE0_DATA_OFFSET },
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_UYVY,
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YVYU,
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_VYUY,
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YUV422P,
-		.vdownsampling = { 1, 1, 1 },
-		.bit_depth = { 8, 4, 4 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 3,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YUV420,
-		.vdownsampling = { 1, 2, 2 },
-		.bit_depth = { 8, 4, 4 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 3,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YVU420,
-		.vdownsampling = { 1, 2, 2 },
-		.bit_depth = { 8, 4, 4 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 3,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_NV12,
-		.vdownsampling = { 1, 2 },
-		.bit_depth = { 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_NV21,
-		.vdownsampling = { 1, 2 },
-		.bit_depth = { 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_NV16,
-		.vdownsampling = { 1, 1 },
-		.bit_depth = { 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_NV61,
-		.vdownsampling = { 1, 1 },
-		.bit_depth = { 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_NV24,
-		.vdownsampling = { 1, 1 },
-		.bit_depth = { 8, 16 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_NV42,
-		.vdownsampling = { 1, 1 },
-		.bit_depth = { 8, 16 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YUV555, /* uuuvvvvv ayyyyyuu */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x8000,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YUV565, /* uuuvvvvv yyyyyuuu */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YUV444, /* uuuuvvvv aaaayyyy */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0xf000,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YUV32, /* ayuv */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x000000ff,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_AYUV32,
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x000000ff,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_XYUV32,
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_VUYA32,
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0xff000000,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_VUYX32,
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_GREY,
-		.vdownsampling = { 1 },
-		.bit_depth = { 8 },
-		.color_enc = TGP_COLOR_ENC_LUMA,
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_Y10,
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.color_enc = TGP_COLOR_ENC_LUMA,
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_Y12,
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.color_enc = TGP_COLOR_ENC_LUMA,
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_Y16,
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.color_enc = TGP_COLOR_ENC_LUMA,
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_Y16_BE,
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.color_enc = TGP_COLOR_ENC_LUMA,
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGB332, /* rrrgggbb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 8 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGB444, /* ggggbbbb xxxxrrrr */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_XRGB444, /* ggggbbbb xxxxrrrr */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_ARGB444, /* ggggbbbb aaaarrrr */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x00f0,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGBX444, /* bbbbxxxx rrrrgggg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGBA444, /* bbbbaaaa rrrrgggg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x00f0,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_XBGR444, /* ggggrrrr xxxxbbbb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_ABGR444, /* ggggrrrr aaaabbbb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x00f0,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_BGRX444, /* rrrrxxxx bbbbgggg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_BGRA444, /* rrrraaaa bbbbgggg  */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x00f0,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGB555, /* gggbbbbb xrrrrrgg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_XRGB555, /* gggbbbbb xrrrrrgg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_ARGB555, /* gggbbbbb arrrrrgg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-		.alpha_mask = 0x8000,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGBX555, /* ggbbbbbx rrrrrggg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGBA555, /* ggbbbbba rrrrrggg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-		.alpha_mask = 0x8000,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_XBGR555, /* gggrrrrr xbbbbbgg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_ABGR555, /* gggrrrrr abbbbbgg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-		.alpha_mask = 0x8000,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_BGRX555, /* ggrrrrrx bbbbbggg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_BGRA555, /* ggrrrrra bbbbbggg */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.can_do_overlay = true,
-		.alpha_mask = 0x8000,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGB555X, /* xrrrrrgg gggbbbbb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_XRGB555X, /* xrrrrrgg gggbbbbb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_ARGB555X, /* arrrrrgg gggbbbbb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x0080,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGB24, /* rgb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 24 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_BGR24, /* bgr */
-		.vdownsampling = { 1 },
-		.bit_depth = { 24 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_BGR666, /* bbbbbbgg ggggrrrr rrxxxxxx */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGB32, /* xrgb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_BGR32, /* bgrx */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_XRGB32, /* xrgb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_XBGR32, /* bgrx */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_ARGB32, /* argb */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x000000ff,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_ABGR32, /* bgra */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0xff000000,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGBX32, /* rgbx */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_BGRX32, /* xbgr */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_RGBA32, /* rgba */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0x000000ff,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_BGRA32, /* abgr */
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-		.alpha_mask = 0xff000000,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SBGGR8, /* Bayer BG/GR */
-		.vdownsampling = { 1 },
-		.bit_depth = { 8 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SGBRG8, /* Bayer GB/RG */
-		.vdownsampling = { 1 },
-		.bit_depth = { 8 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SGRBG8, /* Bayer GR/BG */
-		.vdownsampling = { 1 },
-		.bit_depth = { 8 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SRGGB8, /* Bayer RG/GB */
-		.vdownsampling = { 1 },
-		.bit_depth = { 8 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SBGGR10, /* Bayer BG/GR */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SGBRG10, /* Bayer GB/RG */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SGRBG10, /* Bayer GR/BG */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SRGGB10, /* Bayer RG/GB */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SBGGR12, /* Bayer BG/GR */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SGBRG12, /* Bayer GB/RG */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SGRBG12, /* Bayer GR/BG */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SRGGB12, /* Bayer RG/GB */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SBGGR16, /* Bayer BG/GR */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SGBRG16, /* Bayer GB/RG */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SGRBG16, /* Bayer GR/BG */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_SRGGB16, /* Bayer RG/GB */
-		.vdownsampling = { 1 },
-		.bit_depth = { 16 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_HSV24, /* HSV 24bits */
-		.color_enc = TGP_COLOR_ENC_HSV,
-		.vdownsampling = { 1 },
-		.bit_depth = { 24 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_HSV32, /* HSV 32bits */
-		.color_enc = TGP_COLOR_ENC_HSV,
-		.vdownsampling = { 1 },
-		.bit_depth = { 32 },
-		.planes   = 1,
-		.buffers = 1,
-	},
-
-	/* Multiplanar formats */
-
-	{
-		.fourcc   = V4L2_PIX_FMT_NV16M,
-		.vdownsampling = { 1, 1 },
-		.bit_depth = { 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 2,
-		.data_offset = { PLANE0_DATA_OFFSET, 0 },
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_NV61M,
-		.vdownsampling = { 1, 1 },
-		.bit_depth = { 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 2,
-		.data_offset = { 0, PLANE0_DATA_OFFSET },
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YUV420M,
-		.vdownsampling = { 1, 2, 2 },
-		.bit_depth = { 8, 4, 4 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 3,
-		.buffers = 3,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YVU420M,
-		.vdownsampling = { 1, 2, 2 },
-		.bit_depth = { 8, 4, 4 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 3,
-		.buffers = 3,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_NV12M,
-		.vdownsampling = { 1, 2 },
-		.bit_depth = { 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 2,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_NV21M,
-		.vdownsampling = { 1, 2 },
-		.bit_depth = { 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 2,
-		.buffers = 2,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YUV422M,
-		.vdownsampling = { 1, 1, 1 },
-		.bit_depth = { 8, 4, 4 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 3,
-		.buffers = 3,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YVU422M,
-		.vdownsampling = { 1, 1, 1 },
-		.bit_depth = { 8, 4, 4 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 3,
-		.buffers = 3,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YUV444M,
-		.vdownsampling = { 1, 1, 1 },
-		.bit_depth = { 8, 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 3,
-		.buffers = 3,
-	},
-	{
-		.fourcc   = V4L2_PIX_FMT_YVU444M,
-		.vdownsampling = { 1, 1, 1 },
-		.bit_depth = { 8, 8, 8 },
-		.color_enc = TGP_COLOR_ENC_YCBCR,
-		.planes   = 3,
-		.buffers = 3,
-	},
-};
-
-/* There are this many multiplanar formats in the list */
-#define VIVID_MPLANAR_FORMATS 10
-
-const struct vivid_fmt *vivid_get_format(struct vivid_dev *dev, u32 pixelformat)
-{
-	const struct vivid_fmt *fmt;
-	unsigned k;
-
-	for (k = 0; k < ARRAY_SIZE(vivid_formats); k++) {
-		fmt = &vivid_formats[k];
-		if (fmt->fourcc == pixelformat)
-			if (fmt->buffers == 1 || dev->multiplanar)
-				return fmt;
-	}
-
-	return NULL;
-}
-
-bool vivid_vid_can_loop(struct vivid_dev *dev)
-{
-	if (dev->src_rect.width != dev->sink_rect.width ||
-	    dev->src_rect.height != dev->sink_rect.height)
-		return false;
-	if (dev->fmt_cap->fourcc != dev->fmt_out->fourcc)
-		return false;
-	if (dev->field_cap != dev->field_out)
-		return false;
-	/*
-	 * While this can be supported, it is just too much work
-	 * to actually implement.
-	 */
-	if (dev->field_cap == V4L2_FIELD_SEQ_TB ||
-	    dev->field_cap == V4L2_FIELD_SEQ_BT)
-		return false;
-	if (vivid_is_svid_cap(dev) && vivid_is_svid_out(dev)) {
-		if (!(dev->std_cap[dev->input] & V4L2_STD_525_60) !=
-		    !(dev->std_out & V4L2_STD_525_60))
-			return false;
-		return true;
-	}
-	if (vivid_is_hdmi_cap(dev) && vivid_is_hdmi_out(dev))
-		return true;
-	return false;
-}
-
-void vivid_send_source_change(struct vivid_dev *dev, unsigned type)
-{
-	struct v4l2_event ev = {
-		.type = V4L2_EVENT_SOURCE_CHANGE,
-		.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
-	};
-	unsigned i;
-
-	for (i = 0; i < dev->num_inputs; i++) {
-		ev.id = i;
-		if (dev->input_type[i] == type) {
-			if (video_is_registered(&dev->vid_cap_dev) && dev->has_vid_cap)
-				v4l2_event_queue(&dev->vid_cap_dev, &ev);
-			if (video_is_registered(&dev->vbi_cap_dev) && dev->has_vbi_cap)
-				v4l2_event_queue(&dev->vbi_cap_dev, &ev);
-		}
-	}
-}
-
-/*
- * Conversion function that converts a single-planar format to a
- * single-plane multiplanar format.
- */
-void fmt_sp2mp(const struct v4l2_format *sp_fmt, struct v4l2_format *mp_fmt)
-{
-	struct v4l2_pix_format_mplane *mp = &mp_fmt->fmt.pix_mp;
-	struct v4l2_plane_pix_format *ppix = &mp->plane_fmt[0];
-	const struct v4l2_pix_format *pix = &sp_fmt->fmt.pix;
-	bool is_out = sp_fmt->type == V4L2_BUF_TYPE_VIDEO_OUTPUT;
-
-	memset(mp->reserved, 0, sizeof(mp->reserved));
-	mp_fmt->type = is_out ? V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :
-			   V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
-	mp->width = pix->width;
-	mp->height = pix->height;
-	mp->pixelformat = pix->pixelformat;
-	mp->field = pix->field;
-	mp->colorspace = pix->colorspace;
-	mp->xfer_func = pix->xfer_func;
-	/* Also copies hsv_enc */
-	mp->ycbcr_enc = pix->ycbcr_enc;
-	mp->quantization = pix->quantization;
-	mp->num_planes = 1;
-	mp->flags = pix->flags;
-	ppix->sizeimage = pix->sizeimage;
-	ppix->bytesperline = pix->bytesperline;
-	memset(ppix->reserved, 0, sizeof(ppix->reserved));
-}
-
-int fmt_sp2mp_func(struct file *file, void *priv,
-		struct v4l2_format *f, fmtfunc func)
-{
-	struct v4l2_format fmt;
-	struct v4l2_pix_format_mplane *mp = &fmt.fmt.pix_mp;
-	struct v4l2_plane_pix_format *ppix = &mp->plane_fmt[0];
-	struct v4l2_pix_format *pix = &f->fmt.pix;
-	int ret;
-
-	/* Converts to a mplane format */
-	fmt_sp2mp(f, &fmt);
-	/* Passes it to the generic mplane format function */
-	ret = func(file, priv, &fmt);
-	/* Copies back the mplane data to the single plane format */
-	pix->width = mp->width;
-	pix->height = mp->height;
-	pix->pixelformat = mp->pixelformat;
-	pix->field = mp->field;
-	pix->colorspace = mp->colorspace;
-	pix->xfer_func = mp->xfer_func;
-	/* Also copies hsv_enc */
-	pix->ycbcr_enc = mp->ycbcr_enc;
-	pix->quantization = mp->quantization;
-	pix->sizeimage = ppix->sizeimage;
-	pix->bytesperline = ppix->bytesperline;
-	pix->flags = mp->flags;
-	return ret;
-}
-
-int vivid_vid_adjust_sel(unsigned flags, struct v4l2_rect *r)
-{
-	unsigned w = r->width;
-	unsigned h = r->height;
-
-	/* sanitize w and h in case someone passes ~0 as the value */
-	w &= 0xffff;
-	h &= 0xffff;
-	if (!(flags & V4L2_SEL_FLAG_LE)) {
-		w++;
-		h++;
-		if (w < 2)
-			w = 2;
-		if (h < 2)
-			h = 2;
-	}
-	if (!(flags & V4L2_SEL_FLAG_GE)) {
-		if (w > MAX_WIDTH)
-			w = MAX_WIDTH;
-		if (h > MAX_HEIGHT)
-			h = MAX_HEIGHT;
-	}
-	w = w & ~1;
-	h = h & ~1;
-	if (w < 2 || h < 2)
-		return -ERANGE;
-	if (w > MAX_WIDTH || h > MAX_HEIGHT)
-		return -ERANGE;
-	if (r->top < 0)
-		r->top = 0;
-	if (r->left < 0)
-		r->left = 0;
-	/* sanitize left and top in case someone passes ~0 as the value */
-	r->left &= 0xfffe;
-	r->top &= 0xfffe;
-	if (r->left + w > MAX_WIDTH)
-		r->left = MAX_WIDTH - w;
-	if (r->top + h > MAX_HEIGHT)
-		r->top = MAX_HEIGHT - h;
-	if ((flags & (V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE)) ==
-			(V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE) &&
-	    (r->width != w || r->height != h))
-		return -ERANGE;
-	r->width = w;
-	r->height = h;
-	return 0;
-}
-
-int vivid_enum_fmt_vid(struct file *file, void  *priv,
-					struct v4l2_fmtdesc *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct vivid_fmt *fmt;
-
-	if (f->index >= ARRAY_SIZE(vivid_formats) -
-	    (dev->multiplanar ? 0 : VIVID_MPLANAR_FORMATS))
-		return -EINVAL;
-
-	fmt = &vivid_formats[f->index];
-
-	f->pixelformat = fmt->fourcc;
-	return 0;
-}
-
-int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX) {
-		if (!vivid_is_sdtv_cap(dev))
-			return -ENODATA;
-		*id = dev->std_cap[dev->input];
-	} else {
-		if (!vivid_is_svid_out(dev))
-			return -ENODATA;
-		*id = dev->std_out;
-	}
-	return 0;
-}
-
-int vidioc_g_dv_timings(struct file *file, void *_fh,
-				    struct v4l2_dv_timings *timings)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX) {
-		if (!vivid_is_hdmi_cap(dev))
-			return -ENODATA;
-		*timings = dev->dv_timings_cap[dev->input];
-	} else {
-		if (!vivid_is_hdmi_out(dev))
-			return -ENODATA;
-		*timings = dev->dv_timings_out;
-	}
-	return 0;
-}
-
-int vidioc_enum_dv_timings(struct file *file, void *_fh,
-				    struct v4l2_enum_dv_timings *timings)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX) {
-		if (!vivid_is_hdmi_cap(dev))
-			return -ENODATA;
-	} else {
-		if (!vivid_is_hdmi_out(dev))
-			return -ENODATA;
-	}
-	return v4l2_enum_dv_timings_cap(timings, &vivid_dv_timings_cap,
-			NULL, NULL);
-}
-
-int vidioc_dv_timings_cap(struct file *file, void *_fh,
-				    struct v4l2_dv_timings_cap *cap)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-
-	if (vdev->vfl_dir == VFL_DIR_RX) {
-		if (!vivid_is_hdmi_cap(dev))
-			return -ENODATA;
-	} else {
-		if (!vivid_is_hdmi_out(dev))
-			return -ENODATA;
-	}
-	*cap = vivid_dv_timings_cap;
-	return 0;
-}
-
-int vidioc_g_edid(struct file *file, void *_fh,
-			 struct v4l2_edid *edid)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-	struct cec_adapter *adap;
-
-	memset(edid->reserved, 0, sizeof(edid->reserved));
-	if (vdev->vfl_dir == VFL_DIR_RX) {
-		if (edid->pad >= dev->num_inputs)
-			return -EINVAL;
-		if (dev->input_type[edid->pad] != HDMI)
-			return -EINVAL;
-		adap = dev->cec_rx_adap;
-	} else {
-		unsigned int bus_idx;
-
-		if (edid->pad >= dev->num_outputs)
-			return -EINVAL;
-		if (dev->output_type[edid->pad] != HDMI)
-			return -EINVAL;
-		if (!dev->display_present[edid->pad])
-			return -ENODATA;
-		bus_idx = dev->cec_output2bus_map[edid->pad];
-		adap = dev->cec_tx_adap[bus_idx];
-	}
-	if (edid->start_block == 0 && edid->blocks == 0) {
-		edid->blocks = dev->edid_blocks;
-		return 0;
-	}
-	if (dev->edid_blocks == 0)
-		return -ENODATA;
-	if (edid->start_block >= dev->edid_blocks)
-		return -EINVAL;
-	if (edid->blocks > dev->edid_blocks - edid->start_block)
-		edid->blocks = dev->edid_blocks - edid->start_block;
-	if (adap)
-		v4l2_set_edid_phys_addr(dev->edid, dev->edid_blocks * 128, adap->phys_addr);
-	memcpy(edid->edid, dev->edid + edid->start_block * 128, edid->blocks * 128);
-	return 0;
-}
diff --git a/drivers/media/platform/vivid/vivid-vid-common.h b/drivers/media/platform/vivid/vivid-vid-common.h
deleted file mode 100644
index d908d9725283..000000000000
--- a/drivers/media/platform/vivid/vivid-vid-common.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-vid-common.h - common video support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_VID_COMMON_H_
-#define _VIVID_VID_COMMON_H_
-
-typedef int (*fmtfunc)(struct file *file, void *priv, struct v4l2_format *f);
-
-/*
- * Conversion function that converts a single-planar format to a
- * single-plane multiplanar format.
- */
-void fmt_sp2mp(const struct v4l2_format *sp_fmt, struct v4l2_format *mp_fmt);
-int fmt_sp2mp_func(struct file *file, void *priv,
-		struct v4l2_format *f, fmtfunc func);
-
-extern const struct v4l2_dv_timings_cap vivid_dv_timings_cap;
-
-const struct vivid_fmt *vivid_get_format(struct vivid_dev *dev, u32 pixelformat);
-
-bool vivid_vid_can_loop(struct vivid_dev *dev);
-void vivid_send_source_change(struct vivid_dev *dev, unsigned type);
-
-int vivid_vid_adjust_sel(unsigned flags, struct v4l2_rect *r);
-
-int vivid_enum_fmt_vid(struct file *file, void  *priv, struct v4l2_fmtdesc *f);
-int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id);
-int vidioc_g_dv_timings(struct file *file, void *_fh, struct v4l2_dv_timings *timings);
-int vidioc_enum_dv_timings(struct file *file, void *_fh, struct v4l2_enum_dv_timings *timings);
-int vidioc_dv_timings_cap(struct file *file, void *_fh, struct v4l2_dv_timings_cap *cap);
-int vidioc_g_edid(struct file *file, void *_fh, struct v4l2_edid *edid);
-int vidioc_subscribe_event(struct v4l2_fh *fh, const struct v4l2_event_subscription *sub);
-
-#endif
diff --git a/drivers/media/platform/vivid/vivid-vid-out.c b/drivers/media/platform/vivid/vivid-vid-out.c
deleted file mode 100644
index ee3446e3217c..000000000000
--- a/drivers/media/platform/vivid/vivid-vid-out.c
+++ /dev/null
@@ -1,1210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * vivid-vid-out.c - video output support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-event.h>
-#include <media/v4l2-dv-timings.h>
-#include <media/v4l2-rect.h>
-
-#include "vivid-core.h"
-#include "vivid-vid-common.h"
-#include "vivid-kthread-out.h"
-#include "vivid-vid-out.h"
-
-static int vid_out_queue_setup(struct vb2_queue *vq,
-		       unsigned *nbuffers, unsigned *nplanes,
-		       unsigned sizes[], struct device *alloc_devs[])
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	const struct vivid_fmt *vfmt = dev->fmt_out;
-	unsigned planes = vfmt->buffers;
-	unsigned h = dev->fmt_out_rect.height;
-	unsigned int size = dev->bytesperline_out[0] * h + vfmt->data_offset[0];
-	unsigned p;
-
-	for (p = vfmt->buffers; p < vfmt->planes; p++)
-		size += dev->bytesperline_out[p] * h / vfmt->vdownsampling[p] +
-			vfmt->data_offset[p];
-
-	if (dev->field_out == V4L2_FIELD_ALTERNATE) {
-		/*
-		 * You cannot use write() with FIELD_ALTERNATE since the field
-		 * information (TOP/BOTTOM) cannot be passed to the kernel.
-		 */
-		if (vb2_fileio_is_active(vq))
-			return -EINVAL;
-	}
-
-	if (dev->queue_setup_error) {
-		/*
-		 * Error injection: test what happens if queue_setup() returns
-		 * an error.
-		 */
-		dev->queue_setup_error = false;
-		return -EINVAL;
-	}
-
-	if (*nplanes) {
-		/*
-		 * Check if the number of requested planes match
-		 * the number of planes in the current format. You can't mix that.
-		 */
-		if (*nplanes != planes)
-			return -EINVAL;
-		if (sizes[0] < size)
-			return -EINVAL;
-		for (p = 1; p < planes; p++) {
-			if (sizes[p] < dev->bytesperline_out[p] * h +
-				       vfmt->data_offset[p])
-				return -EINVAL;
-		}
-	} else {
-		for (p = 0; p < planes; p++)
-			sizes[p] = p ? dev->bytesperline_out[p] * h +
-				       vfmt->data_offset[p] : size;
-	}
-
-	if (vq->num_buffers + *nbuffers < 2)
-		*nbuffers = 2 - vq->num_buffers;
-
-	*nplanes = planes;
-
-	dprintk(dev, 1, "%s: count=%d\n", __func__, *nbuffers);
-	for (p = 0; p < planes; p++)
-		dprintk(dev, 1, "%s: size[%u]=%u\n", __func__, p, sizes[p]);
-	return 0;
-}
-
-static int vid_out_buf_out_validate(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (dev->field_out != V4L2_FIELD_ALTERNATE)
-		vbuf->field = dev->field_out;
-	else if (vbuf->field != V4L2_FIELD_TOP &&
-		 vbuf->field != V4L2_FIELD_BOTTOM)
-		return -EINVAL;
-	return 0;
-}
-
-static int vid_out_buf_prepare(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	const struct vivid_fmt *vfmt = dev->fmt_out;
-	unsigned int planes = vfmt->buffers;
-	unsigned int h = dev->fmt_out_rect.height;
-	unsigned int size = dev->bytesperline_out[0] * h;
-	unsigned p;
-
-	for (p = vfmt->buffers; p < vfmt->planes; p++)
-		size += dev->bytesperline_out[p] * h / vfmt->vdownsampling[p];
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	if (WARN_ON(NULL == dev->fmt_out))
-		return -EINVAL;
-
-	if (dev->buf_prepare_error) {
-		/*
-		 * Error injection: test what happens if buf_prepare() returns
-		 * an error.
-		 */
-		dev->buf_prepare_error = false;
-		return -EINVAL;
-	}
-
-	for (p = 0; p < planes; p++) {
-		if (p)
-			size = dev->bytesperline_out[p] * h;
-		size += vb->planes[p].data_offset;
-
-		if (vb2_get_plane_payload(vb, p) < size) {
-			dprintk(dev, 1, "%s the payload is too small for plane %u (%lu < %u)\n",
-					__func__, p, vb2_get_plane_payload(vb, p), size);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-static void vid_out_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
-
-	dprintk(dev, 1, "%s\n", __func__);
-
-	spin_lock(&dev->slock);
-	list_add_tail(&buf->list, &dev->vid_out_active);
-	spin_unlock(&dev->slock);
-}
-
-static int vid_out_start_streaming(struct vb2_queue *vq, unsigned count)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-	int err;
-
-	if (vb2_is_streaming(&dev->vb_vid_cap_q))
-		dev->can_loop_video = vivid_vid_can_loop(dev);
-
-	dev->vid_out_seq_count = 0;
-	dprintk(dev, 1, "%s\n", __func__);
-	if (dev->start_streaming_error) {
-		dev->start_streaming_error = false;
-		err = -EINVAL;
-	} else {
-		err = vivid_start_generating_vid_out(dev, &dev->vid_out_streaming);
-	}
-	if (err) {
-		struct vivid_buffer *buf, *tmp;
-
-		list_for_each_entry_safe(buf, tmp, &dev->vid_out_active, list) {
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf,
-					VB2_BUF_STATE_QUEUED);
-		}
-	}
-	return err;
-}
-
-/* abort streaming and wait for last buffer */
-static void vid_out_stop_streaming(struct vb2_queue *vq)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vq);
-
-	dprintk(dev, 1, "%s\n", __func__);
-	vivid_stop_generating_vid_out(dev, &dev->vid_out_streaming);
-	dev->can_loop_video = false;
-}
-
-static void vid_out_buf_request_complete(struct vb2_buffer *vb)
-{
-	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
-
-	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_vid_out);
-}
-
-const struct vb2_ops vivid_vid_out_qops = {
-	.queue_setup		= vid_out_queue_setup,
-	.buf_out_validate		= vid_out_buf_out_validate,
-	.buf_prepare		= vid_out_buf_prepare,
-	.buf_queue		= vid_out_buf_queue,
-	.start_streaming	= vid_out_start_streaming,
-	.stop_streaming		= vid_out_stop_streaming,
-	.buf_request_complete	= vid_out_buf_request_complete,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
-};
-
-/*
- * Called whenever the format has to be reset which can occur when
- * changing outputs, standard, timings, etc.
- */
-void vivid_update_format_out(struct vivid_dev *dev)
-{
-	struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt;
-	unsigned size, p;
-	u64 pixelclock;
-
-	switch (dev->output_type[dev->output]) {
-	case SVID:
-	default:
-		dev->field_out = dev->tv_field_out;
-		dev->sink_rect.width = 720;
-		if (dev->std_out & V4L2_STD_525_60) {
-			dev->sink_rect.height = 480;
-			dev->timeperframe_vid_out = (struct v4l2_fract) { 1001, 30000 };
-			dev->service_set_out = V4L2_SLICED_CAPTION_525;
-		} else {
-			dev->sink_rect.height = 576;
-			dev->timeperframe_vid_out = (struct v4l2_fract) { 1000, 25000 };
-			dev->service_set_out = V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
-		}
-		dev->colorspace_out = V4L2_COLORSPACE_SMPTE170M;
-		break;
-	case HDMI:
-		dev->sink_rect.width = bt->width;
-		dev->sink_rect.height = bt->height;
-		size = V4L2_DV_BT_FRAME_WIDTH(bt) * V4L2_DV_BT_FRAME_HEIGHT(bt);
-
-		if (can_reduce_fps(bt) && (bt->flags & V4L2_DV_FL_REDUCED_FPS))
-			pixelclock = div_u64(bt->pixelclock * 1000, 1001);
-		else
-			pixelclock = bt->pixelclock;
-
-		dev->timeperframe_vid_out = (struct v4l2_fract) {
-			size / 100, (u32)pixelclock / 100
-		};
-		if (bt->interlaced)
-			dev->field_out = V4L2_FIELD_ALTERNATE;
-		else
-			dev->field_out = V4L2_FIELD_NONE;
-		if (!dev->dvi_d_out && (bt->flags & V4L2_DV_FL_IS_CE_VIDEO)) {
-			if (bt->width == 720 && bt->height <= 576)
-				dev->colorspace_out = V4L2_COLORSPACE_SMPTE170M;
-			else
-				dev->colorspace_out = V4L2_COLORSPACE_REC709;
-		} else {
-			dev->colorspace_out = V4L2_COLORSPACE_SRGB;
-		}
-		break;
-	}
-	dev->xfer_func_out = V4L2_XFER_FUNC_DEFAULT;
-	dev->ycbcr_enc_out = V4L2_YCBCR_ENC_DEFAULT;
-	dev->hsv_enc_out = V4L2_HSV_ENC_180;
-	dev->quantization_out = V4L2_QUANTIZATION_DEFAULT;
-	dev->compose_out = dev->sink_rect;
-	dev->compose_bounds_out = dev->sink_rect;
-	dev->crop_out = dev->compose_out;
-	if (V4L2_FIELD_HAS_T_OR_B(dev->field_out))
-		dev->crop_out.height /= 2;
-	dev->fmt_out_rect = dev->crop_out;
-	for (p = 0; p < dev->fmt_out->planes; p++)
-		dev->bytesperline_out[p] =
-			(dev->sink_rect.width * dev->fmt_out->bit_depth[p]) / 8;
-}
-
-/* Map the field to something that is valid for the current output */
-static enum v4l2_field vivid_field_out(struct vivid_dev *dev, enum v4l2_field field)
-{
-	if (vivid_is_svid_out(dev)) {
-		switch (field) {
-		case V4L2_FIELD_INTERLACED_TB:
-		case V4L2_FIELD_INTERLACED_BT:
-		case V4L2_FIELD_SEQ_TB:
-		case V4L2_FIELD_SEQ_BT:
-		case V4L2_FIELD_ALTERNATE:
-			return field;
-		case V4L2_FIELD_INTERLACED:
-		default:
-			return V4L2_FIELD_INTERLACED;
-		}
-	}
-	if (vivid_is_hdmi_out(dev))
-		return dev->dv_timings_out.bt.interlaced ? V4L2_FIELD_ALTERNATE :
-						       V4L2_FIELD_NONE;
-	return V4L2_FIELD_NONE;
-}
-
-static enum tpg_pixel_aspect vivid_get_pixel_aspect(const struct vivid_dev *dev)
-{
-	if (vivid_is_svid_out(dev))
-		return (dev->std_out & V4L2_STD_525_60) ?
-			TPG_PIXEL_ASPECT_NTSC : TPG_PIXEL_ASPECT_PAL;
-
-	if (vivid_is_hdmi_out(dev) &&
-	    dev->sink_rect.width == 720 && dev->sink_rect.height <= 576)
-		return dev->sink_rect.height == 480 ?
-			TPG_PIXEL_ASPECT_NTSC : TPG_PIXEL_ASPECT_PAL;
-
-	return TPG_PIXEL_ASPECT_SQUARE;
-}
-
-int vivid_g_fmt_vid_out(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
-	const struct vivid_fmt *fmt = dev->fmt_out;
-	unsigned p;
-
-	mp->width        = dev->fmt_out_rect.width;
-	mp->height       = dev->fmt_out_rect.height;
-	mp->field        = dev->field_out;
-	mp->pixelformat  = fmt->fourcc;
-	mp->colorspace   = dev->colorspace_out;
-	mp->xfer_func    = dev->xfer_func_out;
-	mp->ycbcr_enc    = dev->ycbcr_enc_out;
-	mp->quantization = dev->quantization_out;
-	mp->num_planes = fmt->buffers;
-	for (p = 0; p < mp->num_planes; p++) {
-		mp->plane_fmt[p].bytesperline = dev->bytesperline_out[p];
-		mp->plane_fmt[p].sizeimage =
-			mp->plane_fmt[p].bytesperline * mp->height +
-			fmt->data_offset[p];
-	}
-	for (p = fmt->buffers; p < fmt->planes; p++) {
-		unsigned stride = dev->bytesperline_out[p];
-
-		mp->plane_fmt[0].sizeimage +=
-			(stride * mp->height) / fmt->vdownsampling[p];
-	}
-	return 0;
-}
-
-int vivid_try_fmt_vid_out(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt;
-	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
-	struct v4l2_plane_pix_format *pfmt = mp->plane_fmt;
-	const struct vivid_fmt *fmt;
-	unsigned bytesperline, max_bpl;
-	unsigned factor = 1;
-	unsigned w, h;
-	unsigned p;
-
-	fmt = vivid_get_format(dev, mp->pixelformat);
-	if (!fmt) {
-		dprintk(dev, 1, "Fourcc format (0x%08x) unknown.\n",
-			mp->pixelformat);
-		mp->pixelformat = V4L2_PIX_FMT_YUYV;
-		fmt = vivid_get_format(dev, mp->pixelformat);
-	}
-
-	mp->field = vivid_field_out(dev, mp->field);
-	if (vivid_is_svid_out(dev)) {
-		w = 720;
-		h = (dev->std_out & V4L2_STD_525_60) ? 480 : 576;
-	} else {
-		w = dev->sink_rect.width;
-		h = dev->sink_rect.height;
-	}
-	if (V4L2_FIELD_HAS_T_OR_B(mp->field))
-		factor = 2;
-	if (!dev->has_scaler_out && !dev->has_crop_out && !dev->has_compose_out) {
-		mp->width = w;
-		mp->height = h / factor;
-	} else {
-		struct v4l2_rect r = { 0, 0, mp->width, mp->height * factor };
-
-		v4l2_rect_set_min_size(&r, &vivid_min_rect);
-		v4l2_rect_set_max_size(&r, &vivid_max_rect);
-		if (dev->has_scaler_out && !dev->has_crop_out) {
-			struct v4l2_rect max_r = { 0, 0, MAX_ZOOM * w, MAX_ZOOM * h };
-
-			v4l2_rect_set_max_size(&r, &max_r);
-		} else if (!dev->has_scaler_out && dev->has_compose_out && !dev->has_crop_out) {
-			v4l2_rect_set_max_size(&r, &dev->sink_rect);
-		} else if (!dev->has_scaler_out && !dev->has_compose_out) {
-			v4l2_rect_set_min_size(&r, &dev->sink_rect);
-		}
-		mp->width = r.width;
-		mp->height = r.height / factor;
-	}
-
-	/* This driver supports custom bytesperline values */
-
-	mp->num_planes = fmt->buffers;
-	for (p = 0; p < fmt->buffers; p++) {
-		/* Calculate the minimum supported bytesperline value */
-		bytesperline = (mp->width * fmt->bit_depth[p]) >> 3;
-		/* Calculate the maximum supported bytesperline value */
-		max_bpl = (MAX_ZOOM * MAX_WIDTH * fmt->bit_depth[p]) >> 3;
-
-		if (pfmt[p].bytesperline > max_bpl)
-			pfmt[p].bytesperline = max_bpl;
-		if (pfmt[p].bytesperline < bytesperline)
-			pfmt[p].bytesperline = bytesperline;
-
-		pfmt[p].sizeimage = (pfmt[p].bytesperline * mp->height) /
-				fmt->vdownsampling[p] + fmt->data_offset[p];
-
-		memset(pfmt[p].reserved, 0, sizeof(pfmt[p].reserved));
-	}
-	for (p = fmt->buffers; p < fmt->planes; p++)
-		pfmt[0].sizeimage += (pfmt[0].bytesperline * mp->height *
-			(fmt->bit_depth[p] / fmt->vdownsampling[p])) /
-			(fmt->bit_depth[0] / fmt->vdownsampling[0]);
-
-	mp->xfer_func = V4L2_XFER_FUNC_DEFAULT;
-	mp->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
-	mp->quantization = V4L2_QUANTIZATION_DEFAULT;
-	if (vivid_is_svid_out(dev)) {
-		mp->colorspace = V4L2_COLORSPACE_SMPTE170M;
-	} else if (dev->dvi_d_out || !(bt->flags & V4L2_DV_FL_IS_CE_VIDEO)) {
-		mp->colorspace = V4L2_COLORSPACE_SRGB;
-		if (dev->dvi_d_out)
-			mp->quantization = V4L2_QUANTIZATION_LIM_RANGE;
-	} else if (bt->width == 720 && bt->height <= 576) {
-		mp->colorspace = V4L2_COLORSPACE_SMPTE170M;
-	} else if (mp->colorspace != V4L2_COLORSPACE_SMPTE170M &&
-		   mp->colorspace != V4L2_COLORSPACE_REC709 &&
-		   mp->colorspace != V4L2_COLORSPACE_OPRGB &&
-		   mp->colorspace != V4L2_COLORSPACE_BT2020 &&
-		   mp->colorspace != V4L2_COLORSPACE_SRGB) {
-		mp->colorspace = V4L2_COLORSPACE_REC709;
-	}
-	memset(mp->reserved, 0, sizeof(mp->reserved));
-	return 0;
-}
-
-int vivid_s_fmt_vid_out(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_rect *crop = &dev->crop_out;
-	struct v4l2_rect *compose = &dev->compose_out;
-	struct vb2_queue *q = &dev->vb_vid_out_q;
-	int ret = vivid_try_fmt_vid_out(file, priv, f);
-	unsigned factor = 1;
-	unsigned p;
-
-	if (ret < 0)
-		return ret;
-
-	if (vb2_is_busy(q) &&
-	    (vivid_is_svid_out(dev) ||
-	     mp->width != dev->fmt_out_rect.width ||
-	     mp->height != dev->fmt_out_rect.height ||
-	     mp->pixelformat != dev->fmt_out->fourcc ||
-	     mp->field != dev->field_out)) {
-		dprintk(dev, 1, "%s device busy\n", __func__);
-		return -EBUSY;
-	}
-
-	/*
-	 * Allow for changing the colorspace on the fly. Useful for testing
-	 * purposes, and it is something that HDMI transmitters are able
-	 * to do.
-	 */
-	if (vb2_is_busy(q))
-		goto set_colorspace;
-
-	dev->fmt_out = vivid_get_format(dev, mp->pixelformat);
-	if (V4L2_FIELD_HAS_T_OR_B(mp->field))
-		factor = 2;
-
-	if (dev->has_scaler_out || dev->has_crop_out || dev->has_compose_out) {
-		struct v4l2_rect r = { 0, 0, mp->width, mp->height };
-
-		if (dev->has_scaler_out) {
-			if (dev->has_crop_out)
-				v4l2_rect_map_inside(crop, &r);
-			else
-				*crop = r;
-			if (dev->has_compose_out && !dev->has_crop_out) {
-				struct v4l2_rect min_r = {
-					0, 0,
-					r.width / MAX_ZOOM,
-					factor * r.height / MAX_ZOOM
-				};
-				struct v4l2_rect max_r = {
-					0, 0,
-					r.width * MAX_ZOOM,
-					factor * r.height * MAX_ZOOM
-				};
-
-				v4l2_rect_set_min_size(compose, &min_r);
-				v4l2_rect_set_max_size(compose, &max_r);
-				v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
-			} else if (dev->has_compose_out) {
-				struct v4l2_rect min_r = {
-					0, 0,
-					crop->width / MAX_ZOOM,
-					factor * crop->height / MAX_ZOOM
-				};
-				struct v4l2_rect max_r = {
-					0, 0,
-					crop->width * MAX_ZOOM,
-					factor * crop->height * MAX_ZOOM
-				};
-
-				v4l2_rect_set_min_size(compose, &min_r);
-				v4l2_rect_set_max_size(compose, &max_r);
-				v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
-			}
-		} else if (dev->has_compose_out && !dev->has_crop_out) {
-			v4l2_rect_set_size_to(crop, &r);
-			r.height *= factor;
-			v4l2_rect_set_size_to(compose, &r);
-			v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
-		} else if (!dev->has_compose_out) {
-			v4l2_rect_map_inside(crop, &r);
-			r.height /= factor;
-			v4l2_rect_set_size_to(compose, &r);
-		} else {
-			r.height *= factor;
-			v4l2_rect_set_max_size(compose, &r);
-			v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
-			crop->top *= factor;
-			crop->height *= factor;
-			v4l2_rect_set_size_to(crop, compose);
-			v4l2_rect_map_inside(crop, &r);
-			crop->top /= factor;
-			crop->height /= factor;
-		}
-	} else {
-		struct v4l2_rect r = { 0, 0, mp->width, mp->height };
-
-		v4l2_rect_set_size_to(crop, &r);
-		r.height /= factor;
-		v4l2_rect_set_size_to(compose, &r);
-	}
-
-	dev->fmt_out_rect.width = mp->width;
-	dev->fmt_out_rect.height = mp->height;
-	for (p = 0; p < mp->num_planes; p++)
-		dev->bytesperline_out[p] = mp->plane_fmt[p].bytesperline;
-	for (p = dev->fmt_out->buffers; p < dev->fmt_out->planes; p++)
-		dev->bytesperline_out[p] =
-			(dev->bytesperline_out[0] * dev->fmt_out->bit_depth[p]) /
-			dev->fmt_out->bit_depth[0];
-	dev->field_out = mp->field;
-	if (vivid_is_svid_out(dev))
-		dev->tv_field_out = mp->field;
-
-set_colorspace:
-	dev->colorspace_out = mp->colorspace;
-	dev->xfer_func_out = mp->xfer_func;
-	dev->ycbcr_enc_out = mp->ycbcr_enc;
-	dev->quantization_out = mp->quantization;
-	if (dev->loop_video) {
-		vivid_send_source_change(dev, SVID);
-		vivid_send_source_change(dev, HDMI);
-	}
-	return 0;
-}
-
-int vidioc_g_fmt_vid_out_mplane(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!dev->multiplanar)
-		return -ENOTTY;
-	return vivid_g_fmt_vid_out(file, priv, f);
-}
-
-int vidioc_try_fmt_vid_out_mplane(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!dev->multiplanar)
-		return -ENOTTY;
-	return vivid_try_fmt_vid_out(file, priv, f);
-}
-
-int vidioc_s_fmt_vid_out_mplane(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!dev->multiplanar)
-		return -ENOTTY;
-	return vivid_s_fmt_vid_out(file, priv, f);
-}
-
-int vidioc_g_fmt_vid_out(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-	return fmt_sp2mp_func(file, priv, f, vivid_g_fmt_vid_out);
-}
-
-int vidioc_try_fmt_vid_out(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-	return fmt_sp2mp_func(file, priv, f, vivid_try_fmt_vid_out);
-}
-
-int vidioc_s_fmt_vid_out(struct file *file, void *priv,
-			struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (dev->multiplanar)
-		return -ENOTTY;
-	return fmt_sp2mp_func(file, priv, f, vivid_s_fmt_vid_out);
-}
-
-int vivid_vid_out_g_selection(struct file *file, void *priv,
-			      struct v4l2_selection *sel)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!dev->has_crop_out && !dev->has_compose_out)
-		return -ENOTTY;
-	if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
-		return -EINVAL;
-
-	sel->r.left = sel->r.top = 0;
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP:
-		if (!dev->has_crop_out)
-			return -EINVAL;
-		sel->r = dev->crop_out;
-		break;
-	case V4L2_SEL_TGT_CROP_DEFAULT:
-		if (!dev->has_crop_out)
-			return -EINVAL;
-		sel->r = dev->fmt_out_rect;
-		break;
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		if (!dev->has_crop_out)
-			return -EINVAL;
-		sel->r = vivid_max_rect;
-		break;
-	case V4L2_SEL_TGT_COMPOSE:
-		if (!dev->has_compose_out)
-			return -EINVAL;
-		sel->r = dev->compose_out;
-		break;
-	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
-	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
-		if (!dev->has_compose_out)
-			return -EINVAL;
-		sel->r = dev->sink_rect;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-int vivid_vid_out_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	struct v4l2_rect *crop = &dev->crop_out;
-	struct v4l2_rect *compose = &dev->compose_out;
-	unsigned factor = V4L2_FIELD_HAS_T_OR_B(dev->field_out) ? 2 : 1;
-	int ret;
-
-	if (!dev->has_crop_out && !dev->has_compose_out)
-		return -ENOTTY;
-	if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
-		return -EINVAL;
-
-	switch (s->target) {
-	case V4L2_SEL_TGT_CROP:
-		if (!dev->has_crop_out)
-			return -EINVAL;
-		ret = vivid_vid_adjust_sel(s->flags, &s->r);
-		if (ret)
-			return ret;
-		v4l2_rect_set_min_size(&s->r, &vivid_min_rect);
-		v4l2_rect_set_max_size(&s->r, &dev->fmt_out_rect);
-		if (dev->has_scaler_out) {
-			struct v4l2_rect max_rect = {
-				0, 0,
-				dev->sink_rect.width * MAX_ZOOM,
-				(dev->sink_rect.height / factor) * MAX_ZOOM
-			};
-
-			v4l2_rect_set_max_size(&s->r, &max_rect);
-			if (dev->has_compose_out) {
-				struct v4l2_rect min_rect = {
-					0, 0,
-					s->r.width / MAX_ZOOM,
-					(s->r.height * factor) / MAX_ZOOM
-				};
-				struct v4l2_rect max_rect = {
-					0, 0,
-					s->r.width * MAX_ZOOM,
-					(s->r.height * factor) * MAX_ZOOM
-				};
-
-				v4l2_rect_set_min_size(compose, &min_rect);
-				v4l2_rect_set_max_size(compose, &max_rect);
-				v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
-			}
-		} else if (dev->has_compose_out) {
-			s->r.top *= factor;
-			s->r.height *= factor;
-			v4l2_rect_set_max_size(&s->r, &dev->sink_rect);
-			v4l2_rect_set_size_to(compose, &s->r);
-			v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
-			s->r.top /= factor;
-			s->r.height /= factor;
-		} else {
-			v4l2_rect_set_size_to(&s->r, &dev->sink_rect);
-			s->r.height /= factor;
-		}
-		v4l2_rect_map_inside(&s->r, &dev->fmt_out_rect);
-		*crop = s->r;
-		break;
-	case V4L2_SEL_TGT_COMPOSE:
-		if (!dev->has_compose_out)
-			return -EINVAL;
-		ret = vivid_vid_adjust_sel(s->flags, &s->r);
-		if (ret)
-			return ret;
-		v4l2_rect_set_min_size(&s->r, &vivid_min_rect);
-		v4l2_rect_set_max_size(&s->r, &dev->sink_rect);
-		v4l2_rect_map_inside(&s->r, &dev->compose_bounds_out);
-		s->r.top /= factor;
-		s->r.height /= factor;
-		if (dev->has_scaler_out) {
-			struct v4l2_rect fmt = dev->fmt_out_rect;
-			struct v4l2_rect max_rect = {
-				0, 0,
-				s->r.width * MAX_ZOOM,
-				s->r.height * MAX_ZOOM
-			};
-			struct v4l2_rect min_rect = {
-				0, 0,
-				s->r.width / MAX_ZOOM,
-				s->r.height / MAX_ZOOM
-			};
-
-			v4l2_rect_set_min_size(&fmt, &min_rect);
-			if (!dev->has_crop_out)
-				v4l2_rect_set_max_size(&fmt, &max_rect);
-			if (!v4l2_rect_same_size(&dev->fmt_out_rect, &fmt) &&
-			    vb2_is_busy(&dev->vb_vid_out_q))
-				return -EBUSY;
-			if (dev->has_crop_out) {
-				v4l2_rect_set_min_size(crop, &min_rect);
-				v4l2_rect_set_max_size(crop, &max_rect);
-			}
-			dev->fmt_out_rect = fmt;
-		} else if (dev->has_crop_out) {
-			struct v4l2_rect fmt = dev->fmt_out_rect;
-
-			v4l2_rect_set_min_size(&fmt, &s->r);
-			if (!v4l2_rect_same_size(&dev->fmt_out_rect, &fmt) &&
-			    vb2_is_busy(&dev->vb_vid_out_q))
-				return -EBUSY;
-			dev->fmt_out_rect = fmt;
-			v4l2_rect_set_size_to(crop, &s->r);
-			v4l2_rect_map_inside(crop, &dev->fmt_out_rect);
-		} else {
-			if (!v4l2_rect_same_size(&s->r, &dev->fmt_out_rect) &&
-			    vb2_is_busy(&dev->vb_vid_out_q))
-				return -EBUSY;
-			v4l2_rect_set_size_to(&dev->fmt_out_rect, &s->r);
-			v4l2_rect_set_size_to(crop, &s->r);
-			crop->height /= factor;
-			v4l2_rect_map_inside(crop, &dev->fmt_out_rect);
-		}
-		s->r.top *= factor;
-		s->r.height *= factor;
-		if (dev->bitmap_out && (compose->width != s->r.width ||
-					compose->height != s->r.height)) {
-			vfree(dev->bitmap_out);
-			dev->bitmap_out = NULL;
-		}
-		*compose = s->r;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-int vivid_vid_out_g_pixelaspect(struct file *file, void *priv,
-				int type, struct v4l2_fract *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
-		return -EINVAL;
-
-	switch (vivid_get_pixel_aspect(dev)) {
-	case TPG_PIXEL_ASPECT_NTSC:
-		f->numerator = 11;
-		f->denominator = 10;
-		break;
-	case TPG_PIXEL_ASPECT_PAL:
-		f->numerator = 54;
-		f->denominator = 59;
-		break;
-	default:
-		break;
-	}
-	return 0;
-}
-
-int vidioc_g_fmt_vid_out_overlay(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct v4l2_rect *compose = &dev->compose_out;
-	struct v4l2_window *win = &f->fmt.win;
-	unsigned clipcount = win->clipcount;
-
-	if (!dev->has_fb)
-		return -EINVAL;
-	win->w.top = dev->overlay_out_top;
-	win->w.left = dev->overlay_out_left;
-	win->w.width = compose->width;
-	win->w.height = compose->height;
-	win->clipcount = dev->clipcount_out;
-	win->field = V4L2_FIELD_ANY;
-	win->chromakey = dev->chromakey_out;
-	win->global_alpha = dev->global_alpha_out;
-	if (clipcount > dev->clipcount_out)
-		clipcount = dev->clipcount_out;
-	if (dev->bitmap_out == NULL)
-		win->bitmap = NULL;
-	else if (win->bitmap) {
-		if (copy_to_user(win->bitmap, dev->bitmap_out,
-		    ((dev->compose_out.width + 7) / 8) * dev->compose_out.height))
-			return -EFAULT;
-	}
-	if (clipcount && win->clips) {
-		if (copy_to_user(win->clips, dev->clips_out,
-				 clipcount * sizeof(dev->clips_out[0])))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-int vidioc_try_fmt_vid_out_overlay(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct v4l2_rect *compose = &dev->compose_out;
-	struct v4l2_window *win = &f->fmt.win;
-	int i, j;
-
-	if (!dev->has_fb)
-		return -EINVAL;
-	win->w.left = clamp_t(int, win->w.left,
-			      -dev->display_width, dev->display_width);
-	win->w.top = clamp_t(int, win->w.top,
-			     -dev->display_height, dev->display_height);
-	win->w.width = compose->width;
-	win->w.height = compose->height;
-	/*
-	 * It makes no sense for an OSD to overlay only top or bottom fields,
-	 * so always set this to ANY.
-	 */
-	win->field = V4L2_FIELD_ANY;
-	if (win->clipcount && !win->clips)
-		win->clipcount = 0;
-	if (win->clipcount > MAX_CLIPS)
-		win->clipcount = MAX_CLIPS;
-	if (win->clipcount) {
-		if (copy_from_user(dev->try_clips_out, win->clips,
-				   win->clipcount * sizeof(dev->clips_out[0])))
-			return -EFAULT;
-		for (i = 0; i < win->clipcount; i++) {
-			struct v4l2_rect *r = &dev->try_clips_out[i].c;
-
-			r->top = clamp_t(s32, r->top, 0, dev->display_height - 1);
-			r->height = clamp_t(s32, r->height, 1, dev->display_height - r->top);
-			r->left = clamp_t(u32, r->left, 0, dev->display_width - 1);
-			r->width = clamp_t(u32, r->width, 1, dev->display_width - r->left);
-		}
-		/*
-		 * Yeah, so sue me, it's an O(n^2) algorithm. But n is a small
-		 * number and it's typically a one-time deal.
-		 */
-		for (i = 0; i < win->clipcount - 1; i++) {
-			struct v4l2_rect *r1 = &dev->try_clips_out[i].c;
-
-			for (j = i + 1; j < win->clipcount; j++) {
-				struct v4l2_rect *r2 = &dev->try_clips_out[j].c;
-
-				if (v4l2_rect_overlap(r1, r2))
-					return -EINVAL;
-			}
-		}
-		if (copy_to_user(win->clips, dev->try_clips_out,
-				 win->clipcount * sizeof(dev->clips_out[0])))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-int vidioc_s_fmt_vid_out_overlay(struct file *file, void *priv,
-					struct v4l2_format *f)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const struct v4l2_rect *compose = &dev->compose_out;
-	struct v4l2_window *win = &f->fmt.win;
-	int ret = vidioc_try_fmt_vid_out_overlay(file, priv, f);
-	unsigned bitmap_size = ((compose->width + 7) / 8) * compose->height;
-	unsigned clips_size = win->clipcount * sizeof(dev->clips_out[0]);
-	void *new_bitmap = NULL;
-
-	if (ret)
-		return ret;
-
-	if (win->bitmap) {
-		new_bitmap = vzalloc(bitmap_size);
-
-		if (!new_bitmap)
-			return -ENOMEM;
-		if (copy_from_user(new_bitmap, win->bitmap, bitmap_size)) {
-			vfree(new_bitmap);
-			return -EFAULT;
-		}
-	}
-
-	dev->overlay_out_top = win->w.top;
-	dev->overlay_out_left = win->w.left;
-	vfree(dev->bitmap_out);
-	dev->bitmap_out = new_bitmap;
-	dev->clipcount_out = win->clipcount;
-	if (dev->clipcount_out)
-		memcpy(dev->clips_out, dev->try_clips_out, clips_size);
-	dev->chromakey_out = win->chromakey;
-	dev->global_alpha_out = win->global_alpha;
-	return ret;
-}
-
-int vivid_vid_out_overlay(struct file *file, void *fh, unsigned i)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (i && !dev->fmt_out->can_do_overlay) {
-		dprintk(dev, 1, "unsupported output format for output overlay\n");
-		return -EINVAL;
-	}
-
-	dev->overlay_out_enabled = i;
-	return 0;
-}
-
-int vivid_vid_out_g_fbuf(struct file *file, void *fh,
-				struct v4l2_framebuffer *a)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	a->capability = V4L2_FBUF_CAP_EXTERNOVERLAY |
-			V4L2_FBUF_CAP_BITMAP_CLIPPING |
-			V4L2_FBUF_CAP_LIST_CLIPPING |
-			V4L2_FBUF_CAP_CHROMAKEY |
-			V4L2_FBUF_CAP_SRC_CHROMAKEY |
-			V4L2_FBUF_CAP_GLOBAL_ALPHA |
-			V4L2_FBUF_CAP_LOCAL_ALPHA |
-			V4L2_FBUF_CAP_LOCAL_INV_ALPHA;
-	a->flags = V4L2_FBUF_FLAG_OVERLAY | dev->fbuf_out_flags;
-	a->base = (void *)dev->video_pbase;
-	a->fmt.width = dev->display_width;
-	a->fmt.height = dev->display_height;
-	if (dev->fb_defined.green.length == 5)
-		a->fmt.pixelformat = V4L2_PIX_FMT_ARGB555;
-	else
-		a->fmt.pixelformat = V4L2_PIX_FMT_RGB565;
-	a->fmt.bytesperline = dev->display_byte_stride;
-	a->fmt.sizeimage = a->fmt.height * a->fmt.bytesperline;
-	a->fmt.field = V4L2_FIELD_NONE;
-	a->fmt.colorspace = V4L2_COLORSPACE_SRGB;
-	a->fmt.priv = 0;
-	return 0;
-}
-
-int vivid_vid_out_s_fbuf(struct file *file, void *fh,
-				const struct v4l2_framebuffer *a)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	const unsigned chroma_flags = V4L2_FBUF_FLAG_CHROMAKEY |
-				      V4L2_FBUF_FLAG_SRC_CHROMAKEY;
-	const unsigned alpha_flags = V4L2_FBUF_FLAG_GLOBAL_ALPHA |
-				     V4L2_FBUF_FLAG_LOCAL_ALPHA |
-				     V4L2_FBUF_FLAG_LOCAL_INV_ALPHA;
-
-
-	if ((a->flags & chroma_flags) == chroma_flags)
-		return -EINVAL;
-	switch (a->flags & alpha_flags) {
-	case 0:
-	case V4L2_FBUF_FLAG_GLOBAL_ALPHA:
-	case V4L2_FBUF_FLAG_LOCAL_ALPHA:
-	case V4L2_FBUF_FLAG_LOCAL_INV_ALPHA:
-		break;
-	default:
-		return -EINVAL;
-	}
-	dev->fbuf_out_flags &= ~(chroma_flags | alpha_flags);
-	dev->fbuf_out_flags = a->flags & (chroma_flags | alpha_flags);
-	return 0;
-}
-
-static const struct v4l2_audioout vivid_audio_outputs[] = {
-	{ 0, "Line-Out 1" },
-	{ 1, "Line-Out 2" },
-};
-
-int vidioc_enum_output(struct file *file, void *priv,
-				struct v4l2_output *out)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (out->index >= dev->num_outputs)
-		return -EINVAL;
-
-	out->type = V4L2_OUTPUT_TYPE_ANALOG;
-	switch (dev->output_type[out->index]) {
-	case SVID:
-		snprintf(out->name, sizeof(out->name), "S-Video %u",
-				dev->output_name_counter[out->index]);
-		out->std = V4L2_STD_ALL;
-		if (dev->has_audio_outputs)
-			out->audioset = (1 << ARRAY_SIZE(vivid_audio_outputs)) - 1;
-		out->capabilities = V4L2_OUT_CAP_STD;
-		break;
-	case HDMI:
-		snprintf(out->name, sizeof(out->name), "HDMI %u",
-				dev->output_name_counter[out->index]);
-		out->capabilities = V4L2_OUT_CAP_DV_TIMINGS;
-		break;
-	}
-	return 0;
-}
-
-int vidioc_g_output(struct file *file, void *priv, unsigned *o)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	*o = dev->output;
-	return 0;
-}
-
-int vidioc_s_output(struct file *file, void *priv, unsigned o)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (o >= dev->num_outputs)
-		return -EINVAL;
-
-	if (o == dev->output)
-		return 0;
-
-	if (vb2_is_busy(&dev->vb_vid_out_q) ||
-	    vb2_is_busy(&dev->vb_vbi_out_q) ||
-	    vb2_is_busy(&dev->vb_meta_out_q))
-		return -EBUSY;
-
-	dev->output = o;
-	dev->tv_audio_output = 0;
-	if (dev->output_type[o] == SVID)
-		dev->vid_out_dev.tvnorms = V4L2_STD_ALL;
-	else
-		dev->vid_out_dev.tvnorms = 0;
-
-	dev->vbi_out_dev.tvnorms = dev->vid_out_dev.tvnorms;
-	dev->meta_out_dev.tvnorms = dev->vid_out_dev.tvnorms;
-	vivid_update_format_out(dev);
-
-	v4l2_ctrl_activate(dev->ctrl_display_present, vivid_is_hdmi_out(dev));
-	if (vivid_is_hdmi_out(dev))
-		v4l2_ctrl_s_ctrl(dev->ctrl_display_present,
-				 dev->display_present[dev->output]);
-
-	return 0;
-}
-
-int vidioc_enumaudout(struct file *file, void *fh, struct v4l2_audioout *vout)
-{
-	if (vout->index >= ARRAY_SIZE(vivid_audio_outputs))
-		return -EINVAL;
-	*vout = vivid_audio_outputs[vout->index];
-	return 0;
-}
-
-int vidioc_g_audout(struct file *file, void *fh, struct v4l2_audioout *vout)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_svid_out(dev))
-		return -EINVAL;
-	*vout = vivid_audio_outputs[dev->tv_audio_output];
-	return 0;
-}
-
-int vidioc_s_audout(struct file *file, void *fh, const struct v4l2_audioout *vout)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_svid_out(dev))
-		return -EINVAL;
-	if (vout->index >= ARRAY_SIZE(vivid_audio_outputs))
-		return -EINVAL;
-	dev->tv_audio_output = vout->index;
-	return 0;
-}
-
-int vivid_vid_out_s_std(struct file *file, void *priv, v4l2_std_id id)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (!vivid_is_svid_out(dev))
-		return -ENODATA;
-	if (dev->std_out == id)
-		return 0;
-	if (vb2_is_busy(&dev->vb_vid_out_q) || vb2_is_busy(&dev->vb_vbi_out_q))
-		return -EBUSY;
-	dev->std_out = id;
-	vivid_update_format_out(dev);
-	return 0;
-}
-
-static bool valid_cvt_gtf_timings(struct v4l2_dv_timings *timings)
-{
-	struct v4l2_bt_timings *bt = &timings->bt;
-
-	if ((bt->standards & (V4L2_DV_BT_STD_CVT | V4L2_DV_BT_STD_GTF)) &&
-	    v4l2_valid_dv_timings(timings, &vivid_dv_timings_cap, NULL, NULL))
-		return true;
-
-	return false;
-}
-
-int vivid_vid_out_s_dv_timings(struct file *file, void *_fh,
-				    struct v4l2_dv_timings *timings)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-	if (!vivid_is_hdmi_out(dev))
-		return -ENODATA;
-	if (!v4l2_find_dv_timings_cap(timings, &vivid_dv_timings_cap,
-				0, NULL, NULL) &&
-	    !valid_cvt_gtf_timings(timings))
-		return -EINVAL;
-	if (v4l2_match_dv_timings(timings, &dev->dv_timings_out, 0, true))
-		return 0;
-	if (vb2_is_busy(&dev->vb_vid_out_q))
-		return -EBUSY;
-	dev->dv_timings_out = *timings;
-	vivid_update_format_out(dev);
-	return 0;
-}
-
-int vivid_vid_out_g_parm(struct file *file, void *priv,
-			  struct v4l2_streamparm *parm)
-{
-	struct vivid_dev *dev = video_drvdata(file);
-
-	if (parm->type != (dev->multiplanar ?
-			   V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :
-			   V4L2_BUF_TYPE_VIDEO_OUTPUT))
-		return -EINVAL;
-
-	parm->parm.output.capability   = V4L2_CAP_TIMEPERFRAME;
-	parm->parm.output.timeperframe = dev->timeperframe_vid_out;
-	parm->parm.output.writebuffers  = 1;
-
-	return 0;
-}
-
-int vidioc_subscribe_event(struct v4l2_fh *fh,
-			const struct v4l2_event_subscription *sub)
-{
-	switch (sub->type) {
-	case V4L2_EVENT_SOURCE_CHANGE:
-		if (fh->vdev->vfl_dir == VFL_DIR_RX)
-			return v4l2_src_change_event_subscribe(fh, sub);
-		break;
-	default:
-		return v4l2_ctrl_subscribe_event(fh, sub);
-	}
-	return -EINVAL;
-}
diff --git a/drivers/media/platform/vivid/vivid-vid-out.h b/drivers/media/platform/vivid/vivid-vid-out.h
deleted file mode 100644
index 8d56314f4ea1..000000000000
--- a/drivers/media/platform/vivid/vivid-vid-out.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * vivid-vid-out.h - video output support functions.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#ifndef _VIVID_VID_OUT_H_
-#define _VIVID_VID_OUT_H_
-
-extern const struct vb2_ops vivid_vid_out_qops;
-
-void vivid_update_format_out(struct vivid_dev *dev);
-
-int vivid_g_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_try_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_s_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_g_fmt_vid_out_mplane(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_try_fmt_vid_out_mplane(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_s_fmt_vid_out_mplane(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_g_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_try_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_s_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_vid_out_g_selection(struct file *file, void *priv, struct v4l2_selection *sel);
-int vivid_vid_out_s_selection(struct file *file, void *fh, struct v4l2_selection *s);
-int vivid_vid_out_g_pixelaspect(struct file *file, void *priv, int type, struct v4l2_fract *f);
-int vidioc_enum_fmt_vid_out_overlay(struct file *file, void  *priv, struct v4l2_fmtdesc *f);
-int vidioc_g_fmt_vid_out_overlay(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_try_fmt_vid_out_overlay(struct file *file, void *priv, struct v4l2_format *f);
-int vidioc_s_fmt_vid_out_overlay(struct file *file, void *priv, struct v4l2_format *f);
-int vivid_vid_out_overlay(struct file *file, void *fh, unsigned i);
-int vivid_vid_out_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *a);
-int vivid_vid_out_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *a);
-int vidioc_enum_output(struct file *file, void *priv, struct v4l2_output *out);
-int vidioc_g_output(struct file *file, void *priv, unsigned *i);
-int vidioc_s_output(struct file *file, void *priv, unsigned i);
-int vidioc_enumaudout(struct file *file, void *fh, struct v4l2_audioout *vout);
-int vidioc_g_audout(struct file *file, void *fh, struct v4l2_audioout *vout);
-int vidioc_s_audout(struct file *file, void *fh, const struct v4l2_audioout *vout);
-int vivid_vid_out_s_std(struct file *file, void *priv, v4l2_std_id id);
-int vivid_vid_out_s_dv_timings(struct file *file, void *_fh, struct v4l2_dv_timings *timings);
-int vivid_vid_out_g_parm(struct file *file, void *priv, struct v4l2_streamparm *parm);
-
-#endif
diff --git a/drivers/media/platform/xilinx/Kconfig b/drivers/media/platform/xilinx/Kconfig
index a2773ad7c185..01c96fb66414 100644
--- a/drivers/media/platform/xilinx/Kconfig
+++ b/drivers/media/platform/xilinx/Kconfig
@@ -2,7 +2,9 @@
 
 config VIDEO_XILINX
 	tristate "Xilinx Video IP (EXPERIMENTAL)"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && HAS_DMA
+	depends on VIDEO_V4L2  && OF && HAS_DMA
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_FWNODE
 	help
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index eb79d99787bd..d29e29645e04 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -36,7 +36,7 @@ config RADIO_SI476X
 	  In order to control your radio card, you will need to use programs
 	  that are compatible with the Video For Linux 2 API.  Information on
 	  this API and pointers to "v4l2" programs may be found at
-	  <file:Documentation/media/media_uapi.rst>.
+	  <file:Documentation/userspace-api/media/index.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-si476x.
@@ -76,7 +76,7 @@ config RADIO_MAXIRADIO
 	  In order to control your radio card, you will need to use programs
 	  that are compatible with the Video For Linux API.  Information on
 	  this API and pointers to "v4l" programs may be found at
-	  <file:Documentation/media/media_uapi.rst>.
+	  <file:Documentation/userspace-api/media/index.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-maxiradio.
@@ -94,7 +94,7 @@ config RADIO_SHARK
 	  In order to control your radio card, you will need to use programs
 	  that are compatible with the Video For Linux API.  Information on
 	  this API and pointers to "v4l" programs may be found at
-	  <file:Documentation/media/media_uapi.rst>.
+	  <file:Documentation/userspace-api/media/index.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-shark.
@@ -111,7 +111,7 @@ config RADIO_SHARK2
 	  In order to control your radio card, you will need to use programs
 	  that are compatible with the Video For Linux API.  Information on
 	  this API and pointers to "v4l" programs may be found at
-	  <file:Documentation/media/media_uapi.rst>.
+	  <file:Documentation/userspace-api/media/index.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-shark2.
@@ -218,7 +218,7 @@ config RADIO_WL1273
 	  In order to control your radio card, you will need to use programs
 	  that are compatible with the Video For Linux 2 API.  Information on
 	  this API and pointers to "v4l2" programs may be found at
-	  <file:Documentation/media/media_uapi.rst>.
+	  <file:Documentation/userspace-api/media/index.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-wl1273.
@@ -272,7 +272,7 @@ config RADIO_RTRACK
 	  been reported to be used by these cards.
 
 	  More information is contained in the file
-	  <file:Documentation/media/v4l-drivers/radiotrack.rst>.
+	  <file:Documentation/driver-api/media/drivers/radiotrack.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-aimslab.
diff --git a/drivers/media/radio/si470x/Kconfig b/drivers/media/radio/si470x/Kconfig
index a1ba8bc54b62..7161bd6cd13c 100644
--- a/drivers/media/radio/si470x/Kconfig
+++ b/drivers/media/radio/si470x/Kconfig
@@ -30,7 +30,7 @@ config USB_SI470X
 
 	  Please have a look at the documentation, especially on how
 	  to redirect the audio stream from the radio to your sound device:
-	  Documentation/media/v4l-drivers/si470x.rst
+	  Documentation/admin-guide/media/si470x.rst
 
 	  Say Y here if you want to connect this type of radio to your
 	  computer's USB port.
diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig
index 1dee7277004b..d5ae3388d3db 100644
--- a/drivers/media/radio/wl128x/Kconfig
+++ b/drivers/media/radio/wl128x/Kconfig
@@ -2,7 +2,6 @@
 #
 # TI's wl128x FM driver based on TI's ST driver.
 #
-menu "Texas Instruments WL128x FM driver (ST based)"
 config RADIO_WL128X
 	tristate "Texas Instruments WL128x FM Radio"
 	depends on VIDEO_V4L2 && RFKILL && TTY && TI_ST
@@ -13,6 +12,4 @@ config RADIO_WL128X
 	  In order to control your radio card, you will need to use programs
 	  that are compatible with the Video For Linux 2 API.  Information on
 	  this API and pointers to "v4l2" programs may be found at
-	  <file:Documentation/media/media_uapi.rst>.
-
-endmenu
+	  <file:Documentation/userspace-api/media/index.rst>.
diff --git a/drivers/media/rc/bpf-lirc.c b/drivers/media/rc/bpf-lirc.c
index 0f3417d161b8..069c42f22a8c 100644
--- a/drivers/media/rc/bpf-lirc.c
+++ b/drivers/media/rc/bpf-lirc.c
@@ -103,6 +103,8 @@ lirc_mode2_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_map_peek_elem_proto;
 	case BPF_FUNC_ktime_get_ns:
 		return &bpf_ktime_get_ns_proto;
+	case BPF_FUNC_ktime_get_boot_ns:
+		return &bpf_ktime_get_boot_ns_proto;
 	case BPF_FUNC_tail_call:
 		return &bpf_tail_call_proto;
 	case BPF_FUNC_get_prandom_u32:
diff --git a/drivers/media/rc/iguanair.c b/drivers/media/rc/iguanair.c
index 3c8bd13d029a..566c2816d5be 100644
--- a/drivers/media/rc/iguanair.c
+++ b/drivers/media/rc/iguanair.c
@@ -14,7 +14,6 @@
 #include <linux/completion.h>
 #include <media/rc-core.h>
 
-#define DRIVER_NAME "iguanair"
 #define BUF_SIZE 152
 
 struct iguanair {
@@ -27,8 +26,6 @@ struct iguanair {
 	uint8_t bufsize;
 	uint8_t cycle_overhead;
 
-	struct mutex lock;
-
 	/* receiver support */
 	bool receiver_on;
 	dma_addr_t dma_in, dma_out;
@@ -284,8 +281,6 @@ static int iguanair_set_tx_carrier(struct rc_dev *dev, uint32_t carrier)
 	if (carrier < 25000 || carrier > 150000)
 		return -EINVAL;
 
-	mutex_lock(&ir->lock);
-
 	if (carrier != ir->carrier) {
 		uint32_t cycles, fours, sevens;
 
@@ -314,8 +309,6 @@ static int iguanair_set_tx_carrier(struct rc_dev *dev, uint32_t carrier)
 		ir->packet->busy4 = 110 - fours;
 	}
 
-	mutex_unlock(&ir->lock);
-
 	return 0;
 }
 
@@ -326,9 +319,7 @@ static int iguanair_set_tx_mask(struct rc_dev *dev, uint32_t mask)
 	if (mask > 15)
 		return 4;
 
-	mutex_lock(&ir->lock);
 	ir->packet->channels = mask << 4;
-	mutex_unlock(&ir->lock);
 
 	return 0;
 }
@@ -339,8 +330,6 @@ static int iguanair_tx(struct rc_dev *dev, unsigned *txbuf, unsigned count)
 	unsigned int i, size, p, periods;
 	int rc;
 
-	mutex_lock(&ir->lock);
-
 	/* convert from us to carrier periods */
 	for (i = size = 0; i < count; i++) {
 		periods = DIV_ROUND_CLOSEST(txbuf[i] * ir->carrier, 1000000);
@@ -368,8 +357,6 @@ static int iguanair_tx(struct rc_dev *dev, unsigned *txbuf, unsigned count)
 		rc = -EOVERFLOW;
 
 out:
-	mutex_unlock(&ir->lock);
-
 	return rc ? rc : count;
 }
 
@@ -378,14 +365,10 @@ static int iguanair_open(struct rc_dev *rdev)
 	struct iguanair *ir = rdev->priv;
 	int rc;
 
-	mutex_lock(&ir->lock);
-
 	rc = iguanair_receiver(ir, true);
 	if (rc == 0)
 		ir->receiver_on = true;
 
-	mutex_unlock(&ir->lock);
-
 	return rc;
 }
 
@@ -394,14 +377,10 @@ static void iguanair_close(struct rc_dev *rdev)
 	struct iguanair *ir = rdev->priv;
 	int rc;
 
-	mutex_lock(&ir->lock);
-
 	rc = iguanair_receiver(ir, false);
 	ir->receiver_on = false;
 	if (rc && rc != -ENODEV)
 		dev_warn(ir->dev, "failed to disable receiver: %d\n", rc);
-
-	mutex_unlock(&ir->lock);
 }
 
 static int iguanair_probe(struct usb_interface *intf,
@@ -441,7 +420,6 @@ static int iguanair_probe(struct usb_interface *intf,
 	ir->rc = rc;
 	ir->dev = &intf->dev;
 	ir->udev = udev;
-	mutex_init(&ir->lock);
 
 	init_completion(&ir->completion);
 	pipeout = usb_sndintpipe(udev,
@@ -483,7 +461,7 @@ static int iguanair_probe(struct usb_interface *intf,
 	rc->s_tx_mask = iguanair_set_tx_mask;
 	rc->s_tx_carrier = iguanair_set_tx_carrier;
 	rc->tx_ir = iguanair_tx;
-	rc->driver_name = DRIVER_NAME;
+	rc->driver_name = KBUILD_MODNAME;
 	rc->map_name = RC_MAP_RC6_MCE;
 	rc->min_timeout = 1;
 	rc->timeout = IR_DEFAULT_TIMEOUT;
@@ -538,8 +516,6 @@ static int iguanair_suspend(struct usb_interface *intf, pm_message_t message)
 	struct iguanair *ir = usb_get_intfdata(intf);
 	int rc = 0;
 
-	mutex_lock(&ir->lock);
-
 	if (ir->receiver_on) {
 		rc = iguanair_receiver(ir, false);
 		if (rc)
@@ -549,17 +525,13 @@ static int iguanair_suspend(struct usb_interface *intf, pm_message_t message)
 	usb_kill_urb(ir->urb_in);
 	usb_kill_urb(ir->urb_out);
 
-	mutex_unlock(&ir->lock);
-
 	return rc;
 }
 
 static int iguanair_resume(struct usb_interface *intf)
 {
 	struct iguanair *ir = usb_get_intfdata(intf);
-	int rc = 0;
-
-	mutex_lock(&ir->lock);
+	int rc;
 
 	rc = usb_submit_urb(ir->urb_in, GFP_KERNEL);
 	if (rc)
@@ -571,8 +543,6 @@ static int iguanair_resume(struct usb_interface *intf)
 			dev_warn(ir->dev, "failed to enable receiver after resume\n");
 	}
 
-	mutex_unlock(&ir->lock);
-
 	return rc;
 }
 
@@ -582,7 +552,7 @@ static const struct usb_device_id iguanair_table[] = {
 };
 
 static struct usb_driver iguanair_driver = {
-	.name =	DRIVER_NAME,
+	.name =	KBUILD_MODNAME,
 	.probe = iguanair_probe,
 	.disconnect = iguanair_disconnect,
 	.suspend = iguanair_suspend,
diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
index 8574eda45102..a0d9c02a7588 100644
--- a/drivers/media/rc/ir-rx51.c
+++ b/drivers/media/rc/ir-rx51.c
@@ -241,7 +241,7 @@ static int ir_rx51_probe(struct platform_device *dev)
 	}
 
 	/* Use default, in case userspace does not set the carrier */
-	ir_rx51.freq = DIV_ROUND_CLOSEST(pwm_get_period(pwm), NSEC_PER_SEC);
+	ir_rx51.freq = DIV_ROUND_CLOSEST_ULL(pwm_get_period(pwm), NSEC_PER_SEC);
 	pwm_put(pwm);
 
 	hrtimer_init(&ir_rx51.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 5f36244cc34f..1eeab277a08e 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -64,6 +64,7 @@ struct ir_raw_event_ctrl {
 	u32				bpf_sample;
 	struct bpf_prog_array __rcu	*progs;
 #endif
+#if IS_ENABLED(CONFIG_IR_NEC_DECODER)
 	struct nec_dec {
 		int state;
 		unsigned count;
@@ -71,12 +72,16 @@ struct ir_raw_event_ctrl {
 		bool is_nec_x;
 		bool necx_repeat;
 	} nec;
+#endif
+#if IS_ENABLED(CONFIG_IR_RC5_DECODER)
 	struct rc5_dec {
 		int state;
 		u32 bits;
 		unsigned count;
 		bool is_rc5x;
 	} rc5;
+#endif
+#if IS_ENABLED(CONFIG_IR_RC6_DECODER)
 	struct rc6_dec {
 		int state;
 		u8 header;
@@ -85,11 +90,15 @@ struct ir_raw_event_ctrl {
 		unsigned count;
 		unsigned wanted_bits;
 	} rc6;
+#endif
+#if IS_ENABLED(CONFIG_IR_SONY_DECODER)
 	struct sony_dec {
 		int state;
 		u32 bits;
 		unsigned count;
 	} sony;
+#endif
+#if IS_ENABLED(CONFIG_IR_JVC_DECODER)
 	struct jvc_dec {
 		int state;
 		u16 bits;
@@ -98,17 +107,23 @@ struct ir_raw_event_ctrl {
 		bool first;
 		bool toggle;
 	} jvc;
+#endif
+#if IS_ENABLED(CONFIG_IR_SANYO_DECODER)
 	struct sanyo_dec {
 		int state;
 		unsigned count;
 		u64 bits;
 	} sanyo;
+#endif
+#if IS_ENABLED(CONFIG_IR_SHARP_DECODER)
 	struct sharp_dec {
 		int state;
 		unsigned count;
 		u32 bits;
 		unsigned int pulse_len;
 	} sharp;
+#endif
+#if IS_ENABLED(CONFIG_IR_MCE_KBD_DECODER)
 	struct mce_kbd_dec {
 		/* locks key up timer */
 		spinlock_t keylock;
@@ -119,11 +134,15 @@ struct ir_raw_event_ctrl {
 		unsigned count;
 		unsigned wanted_bits;
 	} mce_kbd;
+#endif
+#if IS_ENABLED(CONFIG_IR_XMP_DECODER)
 	struct xmp_dec {
 		int state;
 		unsigned count;
 		u32 durations[16];
 	} xmp;
+#endif
+#if IS_ENABLED(CONFIG_IR_IMON_DECODER)
 	struct imon_dec {
 		int state;
 		int count;
@@ -131,11 +150,14 @@ struct ir_raw_event_ctrl {
 		unsigned int bits;
 		bool stick_keyboard;
 	} imon;
+#endif
+#if IS_ENABLED(CONFIG_IR_RCMM_DECODER)
 	struct rcmm_dec {
 		int state;
 		unsigned int count;
 		u32 bits;
 	} rcmm;
+#endif
 };
 
 /* Mutex for locking raw IR processing and handler change */
diff --git a/drivers/media/spi/Kconfig b/drivers/media/spi/Kconfig
index bcc49cb47de6..857ef4ace6e9 100644
--- a/drivers/media/spi/Kconfig
+++ b/drivers/media/spi/Kconfig
@@ -1,15 +1,17 @@
 # SPDX-License-Identifier: GPL-2.0-only
 if VIDEO_V4L2
 
-comment "SPI drivers hidden by 'Autoselect ancillary drivers'"
-	depends on MEDIA_HIDE_ANCILLARY_SUBDRV
+comment "SPI I2C drivers auto-selected by 'Autoselect ancillary drivers'"
+	depends on MEDIA_HIDE_ANCILLARY_SUBDRV && SPI
 
 menu "SPI helper chips"
 	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 
 config VIDEO_GS1662
 	tristate "Gennum Serializers video"
-	depends on SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on SPI && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	help
 	  Enable the GS1662 driver which serializes video streams.
 
diff --git a/drivers/media/test-drivers/Kconfig b/drivers/media/test-drivers/Kconfig
new file mode 100644
index 000000000000..188381c85593
--- /dev/null
+++ b/drivers/media/test-drivers/Kconfig
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menuconfig V4L_TEST_DRIVERS
+	bool "V4L test drivers"
+	depends on VIDEO_DEV
+
+if V4L_TEST_DRIVERS
+
+source "drivers/media/test-drivers/vimc/Kconfig"
+
+source "drivers/media/test-drivers/vivid/Kconfig"
+
+config VIDEO_VIM2M
+	tristate "Virtual Memory-to-Memory Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	select VIDEOBUF2_VMALLOC
+	select V4L2_MEM2MEM_DEV
+	select MEDIA_CONTROLLER
+	select MEDIA_CONTROLLER_REQUEST_API
+	help
+	  This is a virtual test device for the memory-to-memory driver
+	  framework.
+
+source "drivers/media/test-drivers/vicodec/Kconfig"
+
+endif #V4L_TEST_DRIVERS
diff --git a/drivers/media/test-drivers/Makefile b/drivers/media/test-drivers/Makefile
new file mode 100644
index 000000000000..74410d3a9f2d
--- /dev/null
+++ b/drivers/media/test-drivers/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the test drivers.
+#
+
+obj-$(CONFIG_VIDEO_VIMC)		+= vimc/
+obj-$(CONFIG_VIDEO_VIVID)		+= vivid/
+obj-$(CONFIG_VIDEO_VIM2M)		+= vim2m.o
+obj-$(CONFIG_VIDEO_VICODEC)		+= vicodec/
diff --git a/drivers/media/test-drivers/vicodec/Kconfig b/drivers/media/test-drivers/vicodec/Kconfig
new file mode 100644
index 000000000000..d77c67810c73
--- /dev/null
+++ b/drivers/media/test-drivers/vicodec/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_VICODEC
+	tristate "Virtual Codec Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	select VIDEOBUF2_VMALLOC
+	select V4L2_MEM2MEM_DEV
+	select MEDIA_CONTROLLER
+	select MEDIA_CONTROLLER_REQUEST_API
+	help
+	  Driver for a Virtual Codec
+
+	  This driver can be compared to the vim2m driver for emulating
+	  a video device node that exposes an emulated hardware codec.
+
+	  When in doubt, say N.
diff --git a/drivers/media/test-drivers/vicodec/Makefile b/drivers/media/test-drivers/vicodec/Makefile
new file mode 100644
index 000000000000..01bf7e9308a6
--- /dev/null
+++ b/drivers/media/test-drivers/vicodec/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+vicodec-objs := vicodec-core.o codec-fwht.o codec-v4l2-fwht.o
+
+obj-$(CONFIG_VIDEO_VICODEC) += vicodec.o
diff --git a/drivers/media/test-drivers/vicodec/codec-fwht.c b/drivers/media/test-drivers/vicodec/codec-fwht.c
new file mode 100644
index 000000000000..31faf319e508
--- /dev/null
+++ b/drivers/media/test-drivers/vicodec/codec-fwht.c
@@ -0,0 +1,958 @@
+// SPDX-License-Identifier: LGPL-2.1+
+/*
+ * Copyright 2016 Tom aan de Wiel
+ * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * 8x8 Fast Walsh Hadamard Transform in sequency order based on the paper:
+ *
+ * A Recursive Algorithm for Sequency-Ordered Fast Walsh Transforms,
+ * R.D. Brown, 1977
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include "codec-fwht.h"
+
+#define OVERFLOW_BIT BIT(14)
+
+/*
+ * Note: bit 0 of the header must always be 0. Otherwise it cannot
+ * be guaranteed that the magic 8 byte sequence (see below) can
+ * never occur in the rlc output.
+ */
+#define PFRAME_BIT BIT(15)
+#define DUPS_MASK 0x1ffe
+
+#define PBLOCK 0
+#define IBLOCK 1
+
+#define ALL_ZEROS 15
+
+static const uint8_t zigzag[64] = {
+	0,
+	1,  8,
+	2,  9, 16,
+	3, 10, 17, 24,
+	4, 11, 18, 25, 32,
+	5, 12, 19, 26, 33, 40,
+	6, 13, 20, 27, 34, 41, 48,
+	7, 14, 21, 28, 35, 42, 49, 56,
+	15, 22, 29, 36, 43, 50, 57,
+	23, 30, 37, 44, 51, 58,
+	31, 38, 45, 52, 59,
+	39, 46, 53, 60,
+	47, 54, 61,
+	55, 62,
+	63,
+};
+
+/*
+ * noinline_for_stack to work around
+ * https://bugs.llvm.org/show_bug.cgi?id=38809
+ */
+static int noinline_for_stack
+rlc(const s16 *in, __be16 *output, int blocktype)
+{
+	s16 block[8 * 8];
+	s16 *wp = block;
+	int i = 0;
+	int x, y;
+	int ret = 0;
+
+	/* read in block from framebuffer */
+	int lastzero_run = 0;
+	int to_encode;
+
+	for (y = 0; y < 8; y++) {
+		for (x = 0; x < 8; x++) {
+			*wp = in[x + y * 8];
+			wp++;
+		}
+	}
+
+	/* keep track of amount of trailing zeros */
+	for (i = 63; i >= 0 && !block[zigzag[i]]; i--)
+		lastzero_run++;
+
+	*output++ = (blocktype == PBLOCK ? htons(PFRAME_BIT) : 0);
+	ret++;
+
+	to_encode = 8 * 8 - (lastzero_run > 14 ? lastzero_run : 0);
+
+	i = 0;
+	while (i < to_encode) {
+		int cnt = 0;
+		int tmp;
+
+		/* count leading zeros */
+		while ((tmp = block[zigzag[i]]) == 0 && cnt < 14) {
+			cnt++;
+			i++;
+			if (i == to_encode) {
+				cnt--;
+				break;
+			}
+		}
+		/* 4 bits for run, 12 for coefficient (quantization by 4) */
+		*output++ = htons((cnt | tmp << 4));
+		i++;
+		ret++;
+	}
+	if (lastzero_run > 14) {
+		*output = htons(ALL_ZEROS | 0);
+		ret++;
+	}
+
+	return ret;
+}
+
+/*
+ * This function will worst-case increase rlc_in by 65*2 bytes:
+ * one s16 value for the header and 8 * 8 coefficients of type s16.
+ */
+static noinline_for_stack u16
+derlc(const __be16 **rlc_in, s16 *dwht_out, const __be16 *end_of_input)
+{
+	/* header */
+	const __be16 *input = *rlc_in;
+	u16 stat;
+	int dec_count = 0;
+	s16 block[8 * 8 + 16];
+	s16 *wp = block;
+	int i;
+
+	if (input > end_of_input)
+		return OVERFLOW_BIT;
+	stat = ntohs(*input++);
+
+	/*
+	 * Now de-compress, it expands one byte to up to 15 bytes
+	 * (or fills the remainder of the 64 bytes with zeroes if it
+	 * is the last byte to expand).
+	 *
+	 * So block has to be 8 * 8 + 16 bytes, the '+ 16' is to
+	 * allow for overflow if the incoming data was malformed.
+	 */
+	while (dec_count < 8 * 8) {
+		s16 in;
+		int length;
+		int coeff;
+
+		if (input > end_of_input)
+			return OVERFLOW_BIT;
+		in = ntohs(*input++);
+		length = in & 0xf;
+		coeff = in >> 4;
+
+		/* fill remainder with zeros */
+		if (length == 15) {
+			for (i = 0; i < 64 - dec_count; i++)
+				*wp++ = 0;
+			break;
+		}
+
+		for (i = 0; i < length; i++)
+			*wp++ = 0;
+		*wp++ = coeff;
+		dec_count += length + 1;
+	}
+
+	wp = block;
+
+	for (i = 0; i < 64; i++) {
+		int pos = zigzag[i];
+		int y = pos / 8;
+		int x = pos % 8;
+
+		dwht_out[x + y * 8] = *wp++;
+	}
+	*rlc_in = input;
+	return stat;
+}
+
+static const int quant_table[] = {
+	2, 2, 2, 2, 2, 2,  2,  2,
+	2, 2, 2, 2, 2, 2,  2,  2,
+	2, 2, 2, 2, 2, 2,  2,  3,
+	2, 2, 2, 2, 2, 2,  3,  6,
+	2, 2, 2, 2, 2, 3,  6,  6,
+	2, 2, 2, 2, 3, 6,  6,  6,
+	2, 2, 2, 3, 6, 6,  6,  6,
+	2, 2, 3, 6, 6, 6,  6,  8,
+};
+
+static const int quant_table_p[] = {
+	3, 3, 3, 3, 3, 3,  3,  3,
+	3, 3, 3, 3, 3, 3,  3,  3,
+	3, 3, 3, 3, 3, 3,  3,  3,
+	3, 3, 3, 3, 3, 3,  3,  6,
+	3, 3, 3, 3, 3, 3,  6,  6,
+	3, 3, 3, 3, 3, 6,  6,  9,
+	3, 3, 3, 3, 6, 6,  9,  9,
+	3, 3, 3, 6, 6, 9,  9,  10,
+};
+
+static void quantize_intra(s16 *coeff, s16 *de_coeff, u16 qp)
+{
+	const int *quant = quant_table;
+	int i, j;
+
+	for (j = 0; j < 8; j++) {
+		for (i = 0; i < 8; i++, quant++, coeff++, de_coeff++) {
+			*coeff >>= *quant;
+			if (*coeff >= -qp && *coeff <= qp)
+				*coeff = *de_coeff = 0;
+			else
+				*de_coeff = *coeff << *quant;
+		}
+	}
+}
+
+static void dequantize_intra(s16 *coeff)
+{
+	const int *quant = quant_table;
+	int i, j;
+
+	for (j = 0; j < 8; j++)
+		for (i = 0; i < 8; i++, quant++, coeff++)
+			*coeff <<= *quant;
+}
+
+static void quantize_inter(s16 *coeff, s16 *de_coeff, u16 qp)
+{
+	const int *quant = quant_table_p;
+	int i, j;
+
+	for (j = 0; j < 8; j++) {
+		for (i = 0; i < 8; i++, quant++, coeff++, de_coeff++) {
+			*coeff >>= *quant;
+			if (*coeff >= -qp && *coeff <= qp)
+				*coeff = *de_coeff = 0;
+			else
+				*de_coeff = *coeff << *quant;
+		}
+	}
+}
+
+static void dequantize_inter(s16 *coeff)
+{
+	const int *quant = quant_table_p;
+	int i, j;
+
+	for (j = 0; j < 8; j++)
+		for (i = 0; i < 8; i++, quant++, coeff++)
+			*coeff <<= *quant;
+}
+
+static void noinline_for_stack fwht(const u8 *block, s16 *output_block,
+				    unsigned int stride,
+				    unsigned int input_step, bool intra)
+{
+	/* we'll need more than 8 bits for the transformed coefficients */
+	s32 workspace1[8], workspace2[8];
+	const u8 *tmp = block;
+	s16 *out = output_block;
+	int add = intra ? 256 : 0;
+	unsigned int i;
+
+	/* stage 1 */
+	for (i = 0; i < 8; i++, tmp += stride, out += 8) {
+		switch (input_step) {
+		case 1:
+			workspace1[0]  = tmp[0] + tmp[1] - add;
+			workspace1[1]  = tmp[0] - tmp[1];
+
+			workspace1[2]  = tmp[2] + tmp[3] - add;
+			workspace1[3]  = tmp[2] - tmp[3];
+
+			workspace1[4]  = tmp[4] + tmp[5] - add;
+			workspace1[5]  = tmp[4] - tmp[5];
+
+			workspace1[6]  = tmp[6] + tmp[7] - add;
+			workspace1[7]  = tmp[6] - tmp[7];
+			break;
+		case 2:
+			workspace1[0]  = tmp[0] + tmp[2] - add;
+			workspace1[1]  = tmp[0] - tmp[2];
+
+			workspace1[2]  = tmp[4] + tmp[6] - add;
+			workspace1[3]  = tmp[4] - tmp[6];
+
+			workspace1[4]  = tmp[8] + tmp[10] - add;
+			workspace1[5]  = tmp[8] - tmp[10];
+
+			workspace1[6]  = tmp[12] + tmp[14] - add;
+			workspace1[7]  = tmp[12] - tmp[14];
+			break;
+		case 3:
+			workspace1[0]  = tmp[0] + tmp[3] - add;
+			workspace1[1]  = tmp[0] - tmp[3];
+
+			workspace1[2]  = tmp[6] + tmp[9] - add;
+			workspace1[3]  = tmp[6] - tmp[9];
+
+			workspace1[4]  = tmp[12] + tmp[15] - add;
+			workspace1[5]  = tmp[12] - tmp[15];
+
+			workspace1[6]  = tmp[18] + tmp[21] - add;
+			workspace1[7]  = tmp[18] - tmp[21];
+			break;
+		default:
+			workspace1[0]  = tmp[0] + tmp[4] - add;
+			workspace1[1]  = tmp[0] - tmp[4];
+
+			workspace1[2]  = tmp[8] + tmp[12] - add;
+			workspace1[3]  = tmp[8] - tmp[12];
+
+			workspace1[4]  = tmp[16] + tmp[20] - add;
+			workspace1[5]  = tmp[16] - tmp[20];
+
+			workspace1[6]  = tmp[24] + tmp[28] - add;
+			workspace1[7]  = tmp[24] - tmp[28];
+			break;
+		}
+
+		/* stage 2 */
+		workspace2[0] = workspace1[0] + workspace1[2];
+		workspace2[1] = workspace1[0] - workspace1[2];
+		workspace2[2] = workspace1[1] - workspace1[3];
+		workspace2[3] = workspace1[1] + workspace1[3];
+
+		workspace2[4] = workspace1[4] + workspace1[6];
+		workspace2[5] = workspace1[4] - workspace1[6];
+		workspace2[6] = workspace1[5] - workspace1[7];
+		workspace2[7] = workspace1[5] + workspace1[7];
+
+		/* stage 3 */
+		out[0] = workspace2[0] + workspace2[4];
+		out[1] = workspace2[0] - workspace2[4];
+		out[2] = workspace2[1] - workspace2[5];
+		out[3] = workspace2[1] + workspace2[5];
+		out[4] = workspace2[2] + workspace2[6];
+		out[5] = workspace2[2] - workspace2[6];
+		out[6] = workspace2[3] - workspace2[7];
+		out[7] = workspace2[3] + workspace2[7];
+	}
+
+	out = output_block;
+
+	for (i = 0; i < 8; i++, out++) {
+		/* stage 1 */
+		workspace1[0]  = out[0] + out[1 * 8];
+		workspace1[1]  = out[0] - out[1 * 8];
+
+		workspace1[2]  = out[2 * 8] + out[3 * 8];
+		workspace1[3]  = out[2 * 8] - out[3 * 8];
+
+		workspace1[4]  = out[4 * 8] + out[5 * 8];
+		workspace1[5]  = out[4 * 8] - out[5 * 8];
+
+		workspace1[6]  = out[6 * 8] + out[7 * 8];
+		workspace1[7]  = out[6 * 8] - out[7 * 8];
+
+		/* stage 2 */
+		workspace2[0] = workspace1[0] + workspace1[2];
+		workspace2[1] = workspace1[0] - workspace1[2];
+		workspace2[2] = workspace1[1] - workspace1[3];
+		workspace2[3] = workspace1[1] + workspace1[3];
+
+		workspace2[4] = workspace1[4] + workspace1[6];
+		workspace2[5] = workspace1[4] - workspace1[6];
+		workspace2[6] = workspace1[5] - workspace1[7];
+		workspace2[7] = workspace1[5] + workspace1[7];
+		/* stage 3 */
+		out[0 * 8] = workspace2[0] + workspace2[4];
+		out[1 * 8] = workspace2[0] - workspace2[4];
+		out[2 * 8] = workspace2[1] - workspace2[5];
+		out[3 * 8] = workspace2[1] + workspace2[5];
+		out[4 * 8] = workspace2[2] + workspace2[6];
+		out[5 * 8] = workspace2[2] - workspace2[6];
+		out[6 * 8] = workspace2[3] - workspace2[7];
+		out[7 * 8] = workspace2[3] + workspace2[7];
+	}
+}
+
+/*
+ * Not the nicest way of doing it, but P-blocks get twice the range of
+ * that of the I-blocks. Therefore we need a type bigger than 8 bits.
+ * Furthermore values can be negative... This is just a version that
+ * works with 16 signed data
+ */
+static void noinline_for_stack
+fwht16(const s16 *block, s16 *output_block, int stride, int intra)
+{
+	/* we'll need more than 8 bits for the transformed coefficients */
+	s32 workspace1[8], workspace2[8];
+	const s16 *tmp = block;
+	s16 *out = output_block;
+	int i;
+
+	for (i = 0; i < 8; i++, tmp += stride, out += 8) {
+		/* stage 1 */
+		workspace1[0]  = tmp[0] + tmp[1];
+		workspace1[1]  = tmp[0] - tmp[1];
+
+		workspace1[2]  = tmp[2] + tmp[3];
+		workspace1[3]  = tmp[2] - tmp[3];
+
+		workspace1[4]  = tmp[4] + tmp[5];
+		workspace1[5]  = tmp[4] - tmp[5];
+
+		workspace1[6]  = tmp[6] + tmp[7];
+		workspace1[7]  = tmp[6] - tmp[7];
+
+		/* stage 2 */
+		workspace2[0] = workspace1[0] + workspace1[2];
+		workspace2[1] = workspace1[0] - workspace1[2];
+		workspace2[2] = workspace1[1] - workspace1[3];
+		workspace2[3] = workspace1[1] + workspace1[3];
+
+		workspace2[4] = workspace1[4] + workspace1[6];
+		workspace2[5] = workspace1[4] - workspace1[6];
+		workspace2[6] = workspace1[5] - workspace1[7];
+		workspace2[7] = workspace1[5] + workspace1[7];
+
+		/* stage 3 */
+		out[0] = workspace2[0] + workspace2[4];
+		out[1] = workspace2[0] - workspace2[4];
+		out[2] = workspace2[1] - workspace2[5];
+		out[3] = workspace2[1] + workspace2[5];
+		out[4] = workspace2[2] + workspace2[6];
+		out[5] = workspace2[2] - workspace2[6];
+		out[6] = workspace2[3] - workspace2[7];
+		out[7] = workspace2[3] + workspace2[7];
+	}
+
+	out = output_block;
+
+	for (i = 0; i < 8; i++, out++) {
+		/* stage 1 */
+		workspace1[0]  = out[0] + out[1*8];
+		workspace1[1]  = out[0] - out[1*8];
+
+		workspace1[2]  = out[2*8] + out[3*8];
+		workspace1[3]  = out[2*8] - out[3*8];
+
+		workspace1[4]  = out[4*8] + out[5*8];
+		workspace1[5]  = out[4*8] - out[5*8];
+
+		workspace1[6]  = out[6*8] + out[7*8];
+		workspace1[7]  = out[6*8] - out[7*8];
+
+		/* stage 2 */
+		workspace2[0] = workspace1[0] + workspace1[2];
+		workspace2[1] = workspace1[0] - workspace1[2];
+		workspace2[2] = workspace1[1] - workspace1[3];
+		workspace2[3] = workspace1[1] + workspace1[3];
+
+		workspace2[4] = workspace1[4] + workspace1[6];
+		workspace2[5] = workspace1[4] - workspace1[6];
+		workspace2[6] = workspace1[5] - workspace1[7];
+		workspace2[7] = workspace1[5] + workspace1[7];
+
+		/* stage 3 */
+		out[0*8] = workspace2[0] + workspace2[4];
+		out[1*8] = workspace2[0] - workspace2[4];
+		out[2*8] = workspace2[1] - workspace2[5];
+		out[3*8] = workspace2[1] + workspace2[5];
+		out[4*8] = workspace2[2] + workspace2[6];
+		out[5*8] = workspace2[2] - workspace2[6];
+		out[6*8] = workspace2[3] - workspace2[7];
+		out[7*8] = workspace2[3] + workspace2[7];
+	}
+}
+
+static noinline_for_stack void
+ifwht(const s16 *block, s16 *output_block, int intra)
+{
+	/*
+	 * we'll need more than 8 bits for the transformed coefficients
+	 * use native unit of cpu
+	 */
+	int workspace1[8], workspace2[8];
+	int inter = intra ? 0 : 1;
+	const s16 *tmp = block;
+	s16 *out = output_block;
+	int i;
+
+	for (i = 0; i < 8; i++, tmp += 8, out += 8) {
+		/* stage 1 */
+		workspace1[0]  = tmp[0] + tmp[1];
+		workspace1[1]  = tmp[0] - tmp[1];
+
+		workspace1[2]  = tmp[2] + tmp[3];
+		workspace1[3]  = tmp[2] - tmp[3];
+
+		workspace1[4]  = tmp[4] + tmp[5];
+		workspace1[5]  = tmp[4] - tmp[5];
+
+		workspace1[6]  = tmp[6] + tmp[7];
+		workspace1[7]  = tmp[6] - tmp[7];
+
+		/* stage 2 */
+		workspace2[0] = workspace1[0] + workspace1[2];
+		workspace2[1] = workspace1[0] - workspace1[2];
+		workspace2[2] = workspace1[1] - workspace1[3];
+		workspace2[3] = workspace1[1] + workspace1[3];
+
+		workspace2[4] = workspace1[4] + workspace1[6];
+		workspace2[5] = workspace1[4] - workspace1[6];
+		workspace2[6] = workspace1[5] - workspace1[7];
+		workspace2[7] = workspace1[5] + workspace1[7];
+
+		/* stage 3 */
+		out[0] = workspace2[0] + workspace2[4];
+		out[1] = workspace2[0] - workspace2[4];
+		out[2] = workspace2[1] - workspace2[5];
+		out[3] = workspace2[1] + workspace2[5];
+		out[4] = workspace2[2] + workspace2[6];
+		out[5] = workspace2[2] - workspace2[6];
+		out[6] = workspace2[3] - workspace2[7];
+		out[7] = workspace2[3] + workspace2[7];
+	}
+
+	out = output_block;
+
+	for (i = 0; i < 8; i++, out++) {
+		/* stage 1 */
+		workspace1[0]  = out[0] + out[1 * 8];
+		workspace1[1]  = out[0] - out[1 * 8];
+
+		workspace1[2]  = out[2 * 8] + out[3 * 8];
+		workspace1[3]  = out[2 * 8] - out[3 * 8];
+
+		workspace1[4]  = out[4 * 8] + out[5 * 8];
+		workspace1[5]  = out[4 * 8] - out[5 * 8];
+
+		workspace1[6]  = out[6 * 8] + out[7 * 8];
+		workspace1[7]  = out[6 * 8] - out[7 * 8];
+
+		/* stage 2 */
+		workspace2[0] = workspace1[0] + workspace1[2];
+		workspace2[1] = workspace1[0] - workspace1[2];
+		workspace2[2] = workspace1[1] - workspace1[3];
+		workspace2[3] = workspace1[1] + workspace1[3];
+
+		workspace2[4] = workspace1[4] + workspace1[6];
+		workspace2[5] = workspace1[4] - workspace1[6];
+		workspace2[6] = workspace1[5] - workspace1[7];
+		workspace2[7] = workspace1[5] + workspace1[7];
+
+		/* stage 3 */
+		if (inter) {
+			int d;
+
+			out[0 * 8] = workspace2[0] + workspace2[4];
+			out[1 * 8] = workspace2[0] - workspace2[4];
+			out[2 * 8] = workspace2[1] - workspace2[5];
+			out[3 * 8] = workspace2[1] + workspace2[5];
+			out[4 * 8] = workspace2[2] + workspace2[6];
+			out[5 * 8] = workspace2[2] - workspace2[6];
+			out[6 * 8] = workspace2[3] - workspace2[7];
+			out[7 * 8] = workspace2[3] + workspace2[7];
+
+			for (d = 0; d < 8; d++)
+				out[8 * d] >>= 6;
+		} else {
+			int d;
+
+			out[0 * 8] = workspace2[0] + workspace2[4];
+			out[1 * 8] = workspace2[0] - workspace2[4];
+			out[2 * 8] = workspace2[1] - workspace2[5];
+			out[3 * 8] = workspace2[1] + workspace2[5];
+			out[4 * 8] = workspace2[2] + workspace2[6];
+			out[5 * 8] = workspace2[2] - workspace2[6];
+			out[6 * 8] = workspace2[3] - workspace2[7];
+			out[7 * 8] = workspace2[3] + workspace2[7];
+
+			for (d = 0; d < 8; d++) {
+				out[8 * d] >>= 6;
+				out[8 * d] += 128;
+			}
+		}
+	}
+}
+
+static void fill_encoder_block(const u8 *input, s16 *dst,
+			       unsigned int stride, unsigned int input_step)
+{
+	int i, j;
+
+	for (i = 0; i < 8; i++) {
+		for (j = 0; j < 8; j++, input += input_step)
+			*dst++ = *input;
+		input += stride - 8 * input_step;
+	}
+}
+
+static int var_intra(const s16 *input)
+{
+	int32_t mean = 0;
+	int32_t ret = 0;
+	const s16 *tmp = input;
+	int i;
+
+	for (i = 0; i < 8 * 8; i++, tmp++)
+		mean += *tmp;
+	mean /= 64;
+	tmp = input;
+	for (i = 0; i < 8 * 8; i++, tmp++)
+		ret += (*tmp - mean) < 0 ? -(*tmp - mean) : (*tmp - mean);
+	return ret;
+}
+
+static int var_inter(const s16 *old, const s16 *new)
+{
+	int32_t ret = 0;
+	int i;
+
+	for (i = 0; i < 8 * 8; i++, old++, new++)
+		ret += (*old - *new) < 0 ? -(*old - *new) : (*old - *new);
+	return ret;
+}
+
+static noinline_for_stack int
+decide_blocktype(const u8 *cur, const u8 *reference, s16 *deltablock,
+		 unsigned int stride, unsigned int input_step)
+{
+	s16 tmp[64];
+	s16 old[64];
+	s16 *work = tmp;
+	unsigned int k, l;
+	int vari;
+	int vard;
+
+	fill_encoder_block(cur, tmp, stride, input_step);
+	fill_encoder_block(reference, old, 8, 1);
+	vari = var_intra(tmp);
+
+	for (k = 0; k < 8; k++) {
+		for (l = 0; l < 8; l++) {
+			*deltablock = *work - *reference;
+			deltablock++;
+			work++;
+			reference++;
+		}
+	}
+	deltablock -= 64;
+	vard = var_inter(old, tmp);
+	return vari <= vard ? IBLOCK : PBLOCK;
+}
+
+static void fill_decoder_block(u8 *dst, const s16 *input, int stride,
+			       unsigned int dst_step)
+{
+	int i, j;
+
+	for (i = 0; i < 8; i++) {
+		for (j = 0; j < 8; j++, input++, dst += dst_step) {
+			if (*input < 0)
+				*dst = 0;
+			else if (*input > 255)
+				*dst = 255;
+			else
+				*dst = *input;
+		}
+		dst += stride - (8 * dst_step);
+	}
+}
+
+static void add_deltas(s16 *deltas, const u8 *ref, int stride,
+		       unsigned int ref_step)
+{
+	int k, l;
+
+	for (k = 0; k < 8; k++) {
+		for (l = 0; l < 8; l++) {
+			*deltas += *ref;
+			ref += ref_step;
+			/*
+			 * Due to quantizing, it might possible that the
+			 * decoded coefficients are slightly out of range
+			 */
+			if (*deltas < 0)
+				*deltas = 0;
+			else if (*deltas > 255)
+				*deltas = 255;
+			deltas++;
+		}
+		ref += stride - (8 * ref_step);
+	}
+}
+
+static u32 encode_plane(u8 *input, u8 *refp, __be16 **rlco, __be16 *rlco_max,
+			struct fwht_cframe *cf, u32 height, u32 width,
+			u32 stride, unsigned int input_step,
+			bool is_intra, bool next_is_intra)
+{
+	u8 *input_start = input;
+	__be16 *rlco_start = *rlco;
+	s16 deltablock[64];
+	__be16 pframe_bit = htons(PFRAME_BIT);
+	u32 encoding = 0;
+	unsigned int last_size = 0;
+	unsigned int i, j;
+
+	width = round_up(width, 8);
+	height = round_up(height, 8);
+
+	for (j = 0; j < height / 8; j++) {
+		input = input_start + j * 8 * stride;
+		for (i = 0; i < width / 8; i++) {
+			/* intra code, first frame is always intra coded. */
+			int blocktype = IBLOCK;
+			unsigned int size;
+
+			if (!is_intra)
+				blocktype = decide_blocktype(input, refp,
+					deltablock, stride, input_step);
+			if (blocktype == IBLOCK) {
+				fwht(input, cf->coeffs, stride, input_step, 1);
+				quantize_intra(cf->coeffs, cf->de_coeffs,
+					       cf->i_frame_qp);
+			} else {
+				/* inter code */
+				encoding |= FWHT_FRAME_PCODED;
+				fwht16(deltablock, cf->coeffs, 8, 0);
+				quantize_inter(cf->coeffs, cf->de_coeffs,
+					       cf->p_frame_qp);
+			}
+			if (!next_is_intra) {
+				ifwht(cf->de_coeffs, cf->de_fwht, blocktype);
+
+				if (blocktype == PBLOCK)
+					add_deltas(cf->de_fwht, refp, 8, 1);
+				fill_decoder_block(refp, cf->de_fwht, 8, 1);
+			}
+
+			input += 8 * input_step;
+			refp += 8 * 8;
+
+			size = rlc(cf->coeffs, *rlco, blocktype);
+			if (last_size == size &&
+			    !memcmp(*rlco + 1, *rlco - size + 1, 2 * size - 2)) {
+				__be16 *last_rlco = *rlco - size;
+				s16 hdr = ntohs(*last_rlco);
+
+				if (!((*last_rlco ^ **rlco) & pframe_bit) &&
+				    (hdr & DUPS_MASK) < DUPS_MASK)
+					*last_rlco = htons(hdr + 2);
+				else
+					*rlco += size;
+			} else {
+				*rlco += size;
+			}
+			if (*rlco >= rlco_max) {
+				encoding |= FWHT_FRAME_UNENCODED;
+				goto exit_loop;
+			}
+			last_size = size;
+		}
+	}
+
+exit_loop:
+	if (encoding & FWHT_FRAME_UNENCODED) {
+		u8 *out = (u8 *)rlco_start;
+		u8 *p;
+
+		input = input_start;
+		/*
+		 * The compressed stream should never contain the magic
+		 * header, so when we copy the YUV data we replace 0xff
+		 * by 0xfe. Since YUV is limited range such values
+		 * shouldn't appear anyway.
+		 */
+		for (j = 0; j < height; j++) {
+			for (i = 0, p = input; i < width; i++, p += input_step)
+				*out++ = (*p == 0xff) ? 0xfe : *p;
+			input += stride;
+		}
+		*rlco = (__be16 *)out;
+		encoding &= ~FWHT_FRAME_PCODED;
+	}
+	return encoding;
+}
+
+u32 fwht_encode_frame(struct fwht_raw_frame *frm,
+		      struct fwht_raw_frame *ref_frm,
+		      struct fwht_cframe *cf,
+		      bool is_intra, bool next_is_intra,
+		      unsigned int width, unsigned int height,
+		      unsigned int stride, unsigned int chroma_stride)
+{
+	unsigned int size = height * width;
+	__be16 *rlco = cf->rlc_data;
+	__be16 *rlco_max;
+	u32 encoding;
+
+	rlco_max = rlco + size / 2 - 256;
+	encoding = encode_plane(frm->luma, ref_frm->luma, &rlco, rlco_max, cf,
+				height, width, stride,
+				frm->luma_alpha_step, is_intra, next_is_intra);
+	if (encoding & FWHT_FRAME_UNENCODED)
+		encoding |= FWHT_LUMA_UNENCODED;
+	encoding &= ~FWHT_FRAME_UNENCODED;
+
+	if (frm->components_num >= 3) {
+		u32 chroma_h = height / frm->height_div;
+		u32 chroma_w = width / frm->width_div;
+		unsigned int chroma_size = chroma_h * chroma_w;
+
+		rlco_max = rlco + chroma_size / 2 - 256;
+		encoding |= encode_plane(frm->cb, ref_frm->cb, &rlco, rlco_max,
+					 cf, chroma_h, chroma_w,
+					 chroma_stride, frm->chroma_step,
+					 is_intra, next_is_intra);
+		if (encoding & FWHT_FRAME_UNENCODED)
+			encoding |= FWHT_CB_UNENCODED;
+		encoding &= ~FWHT_FRAME_UNENCODED;
+		rlco_max = rlco + chroma_size / 2 - 256;
+		encoding |= encode_plane(frm->cr, ref_frm->cr, &rlco, rlco_max,
+					 cf, chroma_h, chroma_w,
+					 chroma_stride, frm->chroma_step,
+					 is_intra, next_is_intra);
+		if (encoding & FWHT_FRAME_UNENCODED)
+			encoding |= FWHT_CR_UNENCODED;
+		encoding &= ~FWHT_FRAME_UNENCODED;
+	}
+
+	if (frm->components_num == 4) {
+		rlco_max = rlco + size / 2 - 256;
+		encoding |= encode_plane(frm->alpha, ref_frm->alpha, &rlco,
+					 rlco_max, cf, height, width,
+					 stride, frm->luma_alpha_step,
+					 is_intra, next_is_intra);
+		if (encoding & FWHT_FRAME_UNENCODED)
+			encoding |= FWHT_ALPHA_UNENCODED;
+		encoding &= ~FWHT_FRAME_UNENCODED;
+	}
+
+	cf->size = (rlco - cf->rlc_data) * sizeof(*rlco);
+	return encoding;
+}
+
+static bool decode_plane(struct fwht_cframe *cf, const __be16 **rlco,
+			 u32 height, u32 width, const u8 *ref, u32 ref_stride,
+			 unsigned int ref_step, u8 *dst,
+			 unsigned int dst_stride, unsigned int dst_step,
+			 bool uncompressed, const __be16 *end_of_rlco_buf)
+{
+	unsigned int copies = 0;
+	s16 copy[8 * 8];
+	u16 stat;
+	unsigned int i, j;
+	bool is_intra = !ref;
+
+	width = round_up(width, 8);
+	height = round_up(height, 8);
+
+	if (uncompressed) {
+		int i;
+
+		if (end_of_rlco_buf + 1 < *rlco + width * height / 2)
+			return false;
+		for (i = 0; i < height; i++) {
+			memcpy(dst, *rlco, width);
+			dst += dst_stride;
+			*rlco += width / 2;
+		}
+		return true;
+	}
+
+	/*
+	 * When decoding each macroblock the rlco pointer will be increased
+	 * by 65 * 2 bytes worst-case.
+	 * To avoid overflow the buffer has to be 65/64th of the actual raw
+	 * image size, just in case someone feeds it malicious data.
+	 */
+	for (j = 0; j < height / 8; j++) {
+		for (i = 0; i < width / 8; i++) {
+			const u8 *refp = ref + j * 8 * ref_stride +
+				i * 8 * ref_step;
+			u8 *dstp = dst + j * 8 * dst_stride + i * 8 * dst_step;
+
+			if (copies) {
+				memcpy(cf->de_fwht, copy, sizeof(copy));
+				if ((stat & PFRAME_BIT) && !is_intra)
+					add_deltas(cf->de_fwht, refp,
+						   ref_stride, ref_step);
+				fill_decoder_block(dstp, cf->de_fwht,
+						   dst_stride, dst_step);
+				copies--;
+				continue;
+			}
+
+			stat = derlc(rlco, cf->coeffs, end_of_rlco_buf);
+			if (stat & OVERFLOW_BIT)
+				return false;
+			if ((stat & PFRAME_BIT) && !is_intra)
+				dequantize_inter(cf->coeffs);
+			else
+				dequantize_intra(cf->coeffs);
+
+			ifwht(cf->coeffs, cf->de_fwht,
+			      ((stat & PFRAME_BIT) && !is_intra) ? 0 : 1);
+
+			copies = (stat & DUPS_MASK) >> 1;
+			if (copies)
+				memcpy(copy, cf->de_fwht, sizeof(copy));
+			if ((stat & PFRAME_BIT) && !is_intra)
+				add_deltas(cf->de_fwht, refp,
+					   ref_stride, ref_step);
+			fill_decoder_block(dstp, cf->de_fwht, dst_stride,
+					   dst_step);
+		}
+	}
+	return true;
+}
+
+bool fwht_decode_frame(struct fwht_cframe *cf, u32 hdr_flags,
+		       unsigned int components_num, unsigned int width,
+		       unsigned int height, const struct fwht_raw_frame *ref,
+		       unsigned int ref_stride, unsigned int ref_chroma_stride,
+		       struct fwht_raw_frame *dst, unsigned int dst_stride,
+		       unsigned int dst_chroma_stride)
+{
+	const __be16 *rlco = cf->rlc_data;
+	const __be16 *end_of_rlco_buf = cf->rlc_data +
+			(cf->size / sizeof(*rlco)) - 1;
+
+	if (!decode_plane(cf, &rlco, height, width, ref->luma, ref_stride,
+			  ref->luma_alpha_step, dst->luma, dst_stride,
+			  dst->luma_alpha_step,
+			  hdr_flags & FWHT_FL_LUMA_IS_UNCOMPRESSED,
+			  end_of_rlco_buf))
+		return false;
+
+	if (components_num >= 3) {
+		u32 h = height;
+		u32 w = width;
+
+		if (!(hdr_flags & FWHT_FL_CHROMA_FULL_HEIGHT))
+			h /= 2;
+		if (!(hdr_flags & FWHT_FL_CHROMA_FULL_WIDTH))
+			w /= 2;
+
+		if (!decode_plane(cf, &rlco, h, w, ref->cb, ref_chroma_stride,
+				  ref->chroma_step, dst->cb, dst_chroma_stride,
+				  dst->chroma_step,
+				  hdr_flags & FWHT_FL_CB_IS_UNCOMPRESSED,
+				  end_of_rlco_buf))
+			return false;
+		if (!decode_plane(cf, &rlco, h, w, ref->cr, ref_chroma_stride,
+				  ref->chroma_step, dst->cr, dst_chroma_stride,
+				  dst->chroma_step,
+				  hdr_flags & FWHT_FL_CR_IS_UNCOMPRESSED,
+				  end_of_rlco_buf))
+			return false;
+	}
+
+	if (components_num == 4)
+		if (!decode_plane(cf, &rlco, height, width, ref->alpha, ref_stride,
+				  ref->luma_alpha_step, dst->alpha, dst_stride,
+				  dst->luma_alpha_step,
+				  hdr_flags & FWHT_FL_ALPHA_IS_UNCOMPRESSED,
+				  end_of_rlco_buf))
+			return false;
+	return true;
+}
diff --git a/drivers/media/test-drivers/vicodec/codec-fwht.h b/drivers/media/test-drivers/vicodec/codec-fwht.h
new file mode 100644
index 000000000000..b6fec2b1cbca
--- /dev/null
+++ b/drivers/media/test-drivers/vicodec/codec-fwht.h
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: LGPL-2.1+ */
+/*
+ * Copyright 2016 Tom aan de Wiel
+ * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef CODEC_FWHT_H
+#define CODEC_FWHT_H
+
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <asm/byteorder.h>
+
+/*
+ * The compressed format consists of a fwht_cframe_hdr struct followed by the
+ * compressed frame data. The header contains the size of that data.
+ * Each Y, Cb and Cr plane is compressed separately. If the compressed
+ * size of each plane becomes larger than the uncompressed size, then
+ * that plane is stored uncompressed and the corresponding bit is set
+ * in the flags field of the header.
+ *
+ * Each compressed plane consists of macroblocks and each macroblock
+ * is run-length-encoded. Each macroblock starts with a 16 bit value.
+ * Bit 15 indicates if this is a P-coded macroblock (1) or not (0).
+ * P-coded macroblocks contain a delta against the previous frame.
+ *
+ * Bits 1-12 contain a number. If non-zero, then this same macroblock
+ * repeats that number of times. This results in a high degree of
+ * compression for generated images like colorbars.
+ *
+ * Following this macroblock header the MB coefficients are run-length
+ * encoded: the top 12 bits contain the coefficient, the bottom 4 bits
+ * tell how many times this coefficient occurs. The value 0xf indicates
+ * that the remainder of the macroblock should be filled with zeroes.
+ *
+ * All 16 and 32 bit values are stored in big-endian (network) order.
+ *
+ * Each fwht_cframe_hdr starts with an 8 byte magic header that is
+ * guaranteed not to occur in the compressed frame data. This header
+ * can be used to sync to the next frame.
+ *
+ * This codec uses the Fast Walsh Hadamard Transform. Tom aan de Wiel
+ * developed this as part of a university project, specifically for use
+ * with this driver. His project report can be found here:
+ *
+ * https://hverkuil.home.xs4all.nl/fwht.pdf
+ */
+
+/*
+ * This is a sequence of 8 bytes with the low 4 bits set to 0xf.
+ *
+ * This sequence cannot occur in the encoded data
+ *
+ * Note that these two magic values are symmetrical so endian issues here.
+ */
+#define FWHT_MAGIC1 0x4f4f4f4f
+#define FWHT_MAGIC2 0xffffffff
+
+#define FWHT_VERSION 3
+
+/* Set if this is an interlaced format */
+#define FWHT_FL_IS_INTERLACED		BIT(0)
+/* Set if this is a bottom-first (NTSC) interlaced format */
+#define FWHT_FL_IS_BOTTOM_FIRST		BIT(1)
+/* Set if each 'frame' contains just one field */
+#define FWHT_FL_IS_ALTERNATE		BIT(2)
+/*
+ * If FWHT_FL_IS_ALTERNATE was set, then this is set if this
+ * 'frame' is the bottom field, else it is the top field.
+ */
+#define FWHT_FL_IS_BOTTOM_FIELD		BIT(3)
+/* Set if this frame is uncompressed */
+#define FWHT_FL_LUMA_IS_UNCOMPRESSED	BIT(4)
+#define FWHT_FL_CB_IS_UNCOMPRESSED	BIT(5)
+#define FWHT_FL_CR_IS_UNCOMPRESSED	BIT(6)
+#define FWHT_FL_CHROMA_FULL_HEIGHT	BIT(7)
+#define FWHT_FL_CHROMA_FULL_WIDTH	BIT(8)
+#define FWHT_FL_ALPHA_IS_UNCOMPRESSED	BIT(9)
+#define FWHT_FL_I_FRAME			BIT(10)
+
+/* A 4-values flag - the number of components - 1 */
+#define FWHT_FL_COMPONENTS_NUM_MSK	GENMASK(18, 16)
+#define FWHT_FL_COMPONENTS_NUM_OFFSET	16
+
+#define FWHT_FL_PIXENC_MSK	GENMASK(20, 19)
+#define FWHT_FL_PIXENC_OFFSET	19
+#define FWHT_FL_PIXENC_YUV	(1 << FWHT_FL_PIXENC_OFFSET)
+#define FWHT_FL_PIXENC_RGB	(2 << FWHT_FL_PIXENC_OFFSET)
+#define FWHT_FL_PIXENC_HSV	(3 << FWHT_FL_PIXENC_OFFSET)
+
+/*
+ * A macro to calculate the needed padding in order to make sure
+ * both luma and chroma components resolutions are rounded up to
+ * a multiple of 8
+ */
+#define vic_round_dim(dim, div) (round_up((dim) / (div), 8) * (div))
+
+struct fwht_cframe_hdr {
+	u32 magic1;
+	u32 magic2;
+	__be32 version;
+	__be32 width, height;
+	__be32 flags;
+	__be32 colorspace;
+	__be32 xfer_func;
+	__be32 ycbcr_enc;
+	__be32 quantization;
+	__be32 size;
+};
+
+struct fwht_cframe {
+	u16 i_frame_qp;
+	u16 p_frame_qp;
+	__be16 *rlc_data;
+	s16 coeffs[8 * 8];
+	s16 de_coeffs[8 * 8];
+	s16 de_fwht[8 * 8];
+	u32 size;
+};
+
+struct fwht_raw_frame {
+	unsigned int width_div;
+	unsigned int height_div;
+	unsigned int luma_alpha_step;
+	unsigned int chroma_step;
+	unsigned int components_num;
+	u8 *buf;
+	u8 *luma, *cb, *cr, *alpha;
+};
+
+#define FWHT_FRAME_PCODED	BIT(0)
+#define FWHT_FRAME_UNENCODED	BIT(1)
+#define FWHT_LUMA_UNENCODED	BIT(2)
+#define FWHT_CB_UNENCODED	BIT(3)
+#define FWHT_CR_UNENCODED	BIT(4)
+#define FWHT_ALPHA_UNENCODED	BIT(5)
+
+u32 fwht_encode_frame(struct fwht_raw_frame *frm,
+		      struct fwht_raw_frame *ref_frm,
+		      struct fwht_cframe *cf,
+		      bool is_intra, bool next_is_intra,
+		      unsigned int width, unsigned int height,
+		      unsigned int stride, unsigned int chroma_stride);
+bool fwht_decode_frame(struct fwht_cframe *cf, u32 hdr_flags,
+		unsigned int components_num, unsigned int width,
+		unsigned int height, const struct fwht_raw_frame *ref,
+		unsigned int ref_stride, unsigned int ref_chroma_stride,
+		struct fwht_raw_frame *dst, unsigned int dst_stride,
+		unsigned int dst_chroma_stride);
+#endif
diff --git a/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.c b/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.c
new file mode 100644
index 000000000000..b6e39fbd8ad5
--- /dev/null
+++ b/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * A V4L2 frontend for the FWHT codec
+ *
+ * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/videodev2.h>
+#include "codec-v4l2-fwht.h"
+
+static const struct v4l2_fwht_pixfmt_info v4l2_fwht_pixfmts[] = {
+	{ V4L2_PIX_FMT_YUV420,  1, 3, 2, 1, 1, 2, 2, 3, 3, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_YVU420,  1, 3, 2, 1, 1, 2, 2, 3, 3, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_YUV422P, 1, 2, 1, 1, 1, 2, 1, 3, 3, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_NV12,    1, 3, 2, 1, 2, 2, 2, 3, 2, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_NV21,    1, 3, 2, 1, 2, 2, 2, 3, 2, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_NV16,    1, 2, 1, 1, 2, 2, 1, 3, 2, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_NV61,    1, 2, 1, 1, 2, 2, 1, 3, 2, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_NV24,    1, 3, 1, 1, 2, 1, 1, 3, 2, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_NV42,    1, 3, 1, 1, 2, 1, 1, 3, 2, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_YUYV,    2, 2, 1, 2, 4, 2, 1, 3, 1, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_YVYU,    2, 2, 1, 2, 4, 2, 1, 3, 1, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_UYVY,    2, 2, 1, 2, 4, 2, 1, 3, 1, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_VYUY,    2, 2, 1, 2, 4, 2, 1, 3, 1, FWHT_FL_PIXENC_YUV},
+	{ V4L2_PIX_FMT_BGR24,   3, 3, 1, 3, 3, 1, 1, 3, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_RGB24,   3, 3, 1, 3, 3, 1, 1, 3, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_HSV24,   3, 3, 1, 3, 3, 1, 1, 3, 1, FWHT_FL_PIXENC_HSV},
+	{ V4L2_PIX_FMT_BGR32,   4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_XBGR32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_ABGR32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_RGB32,   4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_XRGB32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_ARGB32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_BGRX32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_BGRA32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_RGBX32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_RGBA32,  4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_RGB},
+	{ V4L2_PIX_FMT_HSV32,   4, 4, 1, 4, 4, 1, 1, 4, 1, FWHT_FL_PIXENC_HSV},
+	{ V4L2_PIX_FMT_GREY,    1, 1, 1, 1, 0, 1, 1, 1, 1, FWHT_FL_PIXENC_RGB},
+};
+
+bool v4l2_fwht_validate_fmt(const struct v4l2_fwht_pixfmt_info *info,
+			    u32 width_div, u32 height_div, u32 components_num,
+			    u32 pixenc)
+{
+	if (info->width_div == width_div &&
+	    info->height_div == height_div &&
+	    (!pixenc || info->pixenc == pixenc) &&
+	    info->components_num == components_num)
+		return true;
+	return false;
+}
+
+const struct v4l2_fwht_pixfmt_info *v4l2_fwht_find_nth_fmt(u32 width_div,
+							  u32 height_div,
+							  u32 components_num,
+							  u32 pixenc,
+							  unsigned int start_idx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(v4l2_fwht_pixfmts); i++) {
+		bool is_valid = v4l2_fwht_validate_fmt(&v4l2_fwht_pixfmts[i],
+						       width_div, height_div,
+						       components_num, pixenc);
+		if (is_valid) {
+			if (start_idx == 0)
+				return v4l2_fwht_pixfmts + i;
+			start_idx--;
+		}
+	}
+	return NULL;
+}
+
+const struct v4l2_fwht_pixfmt_info *v4l2_fwht_find_pixfmt(u32 pixelformat)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(v4l2_fwht_pixfmts); i++)
+		if (v4l2_fwht_pixfmts[i].id == pixelformat)
+			return v4l2_fwht_pixfmts + i;
+	return NULL;
+}
+
+const struct v4l2_fwht_pixfmt_info *v4l2_fwht_get_pixfmt(u32 idx)
+{
+	if (idx >= ARRAY_SIZE(v4l2_fwht_pixfmts))
+		return NULL;
+	return v4l2_fwht_pixfmts + idx;
+}
+
+static int prepare_raw_frame(struct fwht_raw_frame *rf,
+			 const struct v4l2_fwht_pixfmt_info *info, u8 *buf,
+			 unsigned int size)
+{
+	rf->luma = buf;
+	rf->width_div = info->width_div;
+	rf->height_div = info->height_div;
+	rf->luma_alpha_step = info->luma_alpha_step;
+	rf->chroma_step = info->chroma_step;
+	rf->alpha = NULL;
+	rf->components_num = info->components_num;
+
+	/*
+	 * The buffer is NULL if it is the reference
+	 * frame of an I-frame in the stateless decoder
+	 */
+	if (!buf) {
+		rf->luma = NULL;
+		rf->cb = NULL;
+		rf->cr = NULL;
+		rf->alpha = NULL;
+		return 0;
+	}
+	switch (info->id) {
+	case V4L2_PIX_FMT_GREY:
+		rf->cb = NULL;
+		rf->cr = NULL;
+		break;
+	case V4L2_PIX_FMT_YUV420:
+		rf->cb = rf->luma + size;
+		rf->cr = rf->cb + size / 4;
+		break;
+	case V4L2_PIX_FMT_YVU420:
+		rf->cr = rf->luma + size;
+		rf->cb = rf->cr + size / 4;
+		break;
+	case V4L2_PIX_FMT_YUV422P:
+		rf->cb = rf->luma + size;
+		rf->cr = rf->cb + size / 2;
+		break;
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV24:
+		rf->cb = rf->luma + size;
+		rf->cr = rf->cb + 1;
+		break;
+	case V4L2_PIX_FMT_NV21:
+	case V4L2_PIX_FMT_NV61:
+	case V4L2_PIX_FMT_NV42:
+		rf->cr = rf->luma + size;
+		rf->cb = rf->cr + 1;
+		break;
+	case V4L2_PIX_FMT_YUYV:
+		rf->cb = rf->luma + 1;
+		rf->cr = rf->cb + 2;
+		break;
+	case V4L2_PIX_FMT_YVYU:
+		rf->cr = rf->luma + 1;
+		rf->cb = rf->cr + 2;
+		break;
+	case V4L2_PIX_FMT_UYVY:
+		rf->cb = rf->luma;
+		rf->cr = rf->cb + 2;
+		rf->luma++;
+		break;
+	case V4L2_PIX_FMT_VYUY:
+		rf->cr = rf->luma;
+		rf->cb = rf->cr + 2;
+		rf->luma++;
+		break;
+	case V4L2_PIX_FMT_RGB24:
+	case V4L2_PIX_FMT_HSV24:
+		rf->cr = rf->luma;
+		rf->cb = rf->cr + 2;
+		rf->luma++;
+		break;
+	case V4L2_PIX_FMT_BGR24:
+		rf->cb = rf->luma;
+		rf->cr = rf->cb + 2;
+		rf->luma++;
+		break;
+	case V4L2_PIX_FMT_RGB32:
+	case V4L2_PIX_FMT_XRGB32:
+	case V4L2_PIX_FMT_HSV32:
+	case V4L2_PIX_FMT_ARGB32:
+		rf->alpha = rf->luma;
+		rf->cr = rf->luma + 1;
+		rf->cb = rf->cr + 2;
+		rf->luma += 2;
+		break;
+	case V4L2_PIX_FMT_BGR32:
+	case V4L2_PIX_FMT_XBGR32:
+	case V4L2_PIX_FMT_ABGR32:
+		rf->cb = rf->luma;
+		rf->cr = rf->cb + 2;
+		rf->luma++;
+		rf->alpha = rf->cr + 1;
+		break;
+	case V4L2_PIX_FMT_BGRX32:
+	case V4L2_PIX_FMT_BGRA32:
+		rf->alpha = rf->luma;
+		rf->cb = rf->luma + 1;
+		rf->cr = rf->cb + 2;
+		rf->luma += 2;
+		break;
+	case V4L2_PIX_FMT_RGBX32:
+	case V4L2_PIX_FMT_RGBA32:
+		rf->alpha = rf->luma + 3;
+		rf->cr = rf->luma;
+		rf->cb = rf->cr + 2;
+		rf->luma++;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int v4l2_fwht_encode(struct v4l2_fwht_state *state, u8 *p_in, u8 *p_out)
+{
+	unsigned int size = state->stride * state->coded_height;
+	unsigned int chroma_stride = state->stride;
+	const struct v4l2_fwht_pixfmt_info *info = state->info;
+	struct fwht_cframe_hdr *p_hdr;
+	struct fwht_cframe cf;
+	struct fwht_raw_frame rf;
+	u32 encoding;
+	u32 flags = 0;
+
+	if (!info)
+		return -EINVAL;
+
+	if (prepare_raw_frame(&rf, info, p_in, size))
+		return -EINVAL;
+
+	if (info->planes_num == 3)
+		chroma_stride /= 2;
+
+	if (info->id == V4L2_PIX_FMT_NV24 ||
+	    info->id == V4L2_PIX_FMT_NV42)
+		chroma_stride *= 2;
+
+	cf.i_frame_qp = state->i_frame_qp;
+	cf.p_frame_qp = state->p_frame_qp;
+	cf.rlc_data = (__be16 *)(p_out + sizeof(*p_hdr));
+
+	encoding = fwht_encode_frame(&rf, &state->ref_frame, &cf,
+				     !state->gop_cnt,
+				     state->gop_cnt == state->gop_size - 1,
+				     state->visible_width,
+				     state->visible_height,
+				     state->stride, chroma_stride);
+	if (!(encoding & FWHT_FRAME_PCODED))
+		state->gop_cnt = 0;
+	if (++state->gop_cnt >= state->gop_size)
+		state->gop_cnt = 0;
+
+	p_hdr = (struct fwht_cframe_hdr *)p_out;
+	p_hdr->magic1 = FWHT_MAGIC1;
+	p_hdr->magic2 = FWHT_MAGIC2;
+	p_hdr->version = htonl(FWHT_VERSION);
+	p_hdr->width = htonl(state->visible_width);
+	p_hdr->height = htonl(state->visible_height);
+	flags |= (info->components_num - 1) << FWHT_FL_COMPONENTS_NUM_OFFSET;
+	flags |= info->pixenc;
+	if (encoding & FWHT_LUMA_UNENCODED)
+		flags |= FWHT_FL_LUMA_IS_UNCOMPRESSED;
+	if (encoding & FWHT_CB_UNENCODED)
+		flags |= FWHT_FL_CB_IS_UNCOMPRESSED;
+	if (encoding & FWHT_CR_UNENCODED)
+		flags |= FWHT_FL_CR_IS_UNCOMPRESSED;
+	if (encoding & FWHT_ALPHA_UNENCODED)
+		flags |= FWHT_FL_ALPHA_IS_UNCOMPRESSED;
+	if (!(encoding & FWHT_FRAME_PCODED))
+		flags |= FWHT_FL_I_FRAME;
+	if (rf.height_div == 1)
+		flags |= FWHT_FL_CHROMA_FULL_HEIGHT;
+	if (rf.width_div == 1)
+		flags |= FWHT_FL_CHROMA_FULL_WIDTH;
+	p_hdr->flags = htonl(flags);
+	p_hdr->colorspace = htonl(state->colorspace);
+	p_hdr->xfer_func = htonl(state->xfer_func);
+	p_hdr->ycbcr_enc = htonl(state->ycbcr_enc);
+	p_hdr->quantization = htonl(state->quantization);
+	p_hdr->size = htonl(cf.size);
+	return cf.size + sizeof(*p_hdr);
+}
+
+int v4l2_fwht_decode(struct v4l2_fwht_state *state, u8 *p_in, u8 *p_out)
+{
+	u32 flags;
+	struct fwht_cframe cf;
+	unsigned int components_num = 3;
+	unsigned int version;
+	const struct v4l2_fwht_pixfmt_info *info;
+	unsigned int hdr_width_div, hdr_height_div;
+	struct fwht_raw_frame dst_rf;
+	unsigned int dst_chroma_stride = state->stride;
+	unsigned int ref_chroma_stride = state->ref_stride;
+	unsigned int dst_size = state->stride * state->coded_height;
+	unsigned int ref_size;
+
+	if (!state->info)
+		return -EINVAL;
+
+	info = state->info;
+
+	version = ntohl(state->header.version);
+	if (!version || version > FWHT_VERSION) {
+		pr_err("version %d is not supported, current version is %d\n",
+		       version, FWHT_VERSION);
+		return -EINVAL;
+	}
+
+	if (state->header.magic1 != FWHT_MAGIC1 ||
+	    state->header.magic2 != FWHT_MAGIC2)
+		return -EINVAL;
+
+	/* TODO: support resolution changes */
+	if (ntohl(state->header.width)  != state->visible_width ||
+	    ntohl(state->header.height) != state->visible_height)
+		return -EINVAL;
+
+	flags = ntohl(state->header.flags);
+
+	if (version >= 2) {
+		if ((flags & FWHT_FL_PIXENC_MSK) != info->pixenc)
+			return -EINVAL;
+		components_num = 1 + ((flags & FWHT_FL_COMPONENTS_NUM_MSK) >>
+				FWHT_FL_COMPONENTS_NUM_OFFSET);
+	}
+
+	if (components_num != info->components_num)
+		return -EINVAL;
+
+	state->colorspace = ntohl(state->header.colorspace);
+	state->xfer_func = ntohl(state->header.xfer_func);
+	state->ycbcr_enc = ntohl(state->header.ycbcr_enc);
+	state->quantization = ntohl(state->header.quantization);
+	cf.rlc_data = (__be16 *)p_in;
+	cf.size = ntohl(state->header.size);
+
+	hdr_width_div = (flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
+	hdr_height_div = (flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
+	if (hdr_width_div != info->width_div ||
+	    hdr_height_div != info->height_div)
+		return -EINVAL;
+
+	if (prepare_raw_frame(&dst_rf, info, p_out, dst_size))
+		return -EINVAL;
+	if (info->planes_num == 3) {
+		dst_chroma_stride /= 2;
+		ref_chroma_stride /= 2;
+	}
+	if (info->id == V4L2_PIX_FMT_NV24 ||
+	    info->id == V4L2_PIX_FMT_NV42) {
+		dst_chroma_stride *= 2;
+		ref_chroma_stride *= 2;
+	}
+
+
+	ref_size = state->ref_stride * state->coded_height;
+
+	if (prepare_raw_frame(&state->ref_frame, info, state->ref_frame.buf,
+			      ref_size))
+		return -EINVAL;
+
+	if (!fwht_decode_frame(&cf, flags, components_num,
+			state->visible_width, state->visible_height,
+			&state->ref_frame, state->ref_stride, ref_chroma_stride,
+			&dst_rf, state->stride, dst_chroma_stride))
+		return -EINVAL;
+	return 0;
+}
diff --git a/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.h b/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.h
new file mode 100644
index 000000000000..1a0d2a9f931a
--- /dev/null
+++ b/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: LGPL-2.1 */
+/*
+ * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef CODEC_V4L2_FWHT_H
+#define CODEC_V4L2_FWHT_H
+
+#include "codec-fwht.h"
+
+struct v4l2_fwht_pixfmt_info {
+	u32 id;
+	unsigned int bytesperline_mult;
+	unsigned int sizeimage_mult;
+	unsigned int sizeimage_div;
+	unsigned int luma_alpha_step;
+	unsigned int chroma_step;
+	/* Chroma plane subsampling */
+	unsigned int width_div;
+	unsigned int height_div;
+	unsigned int components_num;
+	unsigned int planes_num;
+	unsigned int pixenc;
+};
+
+struct v4l2_fwht_state {
+	const struct v4l2_fwht_pixfmt_info *info;
+	unsigned int visible_width;
+	unsigned int visible_height;
+	unsigned int coded_width;
+	unsigned int coded_height;
+	unsigned int stride;
+	unsigned int ref_stride;
+	unsigned int gop_size;
+	unsigned int gop_cnt;
+	u16 i_frame_qp;
+	u16 p_frame_qp;
+
+	enum v4l2_colorspace colorspace;
+	enum v4l2_ycbcr_encoding ycbcr_enc;
+	enum v4l2_xfer_func xfer_func;
+	enum v4l2_quantization quantization;
+
+	struct fwht_raw_frame ref_frame;
+	struct fwht_cframe_hdr header;
+	u8 *compressed_frame;
+	u64 ref_frame_ts;
+};
+
+const struct v4l2_fwht_pixfmt_info *v4l2_fwht_find_pixfmt(u32 pixelformat);
+const struct v4l2_fwht_pixfmt_info *v4l2_fwht_get_pixfmt(u32 idx);
+bool v4l2_fwht_validate_fmt(const struct v4l2_fwht_pixfmt_info *info,
+			    u32 width_div, u32 height_div, u32 components_num,
+			    u32 pixenc);
+const struct v4l2_fwht_pixfmt_info *v4l2_fwht_find_nth_fmt(u32 width_div,
+							  u32 height_div,
+							  u32 components_num,
+							  u32 pixenc,
+							  unsigned int start_idx);
+
+int v4l2_fwht_encode(struct v4l2_fwht_state *state, u8 *p_in, u8 *p_out);
+int v4l2_fwht_decode(struct v4l2_fwht_state *state, u8 *p_in, u8 *p_out);
+
+#endif
diff --git a/drivers/media/test-drivers/vicodec/vicodec-core.c b/drivers/media/test-drivers/vicodec/vicodec-core.c
new file mode 100644
index 000000000000..e879290727ef
--- /dev/null
+++ b/drivers/media/test-drivers/vicodec/vicodec-core.c
@@ -0,0 +1,2241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * A virtual codec example device.
+ *
+ * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * This is a virtual codec device driver for testing the codec framework.
+ * It simulates a device that uses memory buffers for both source and
+ * destination and encodes or decodes the data.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <linux/platform_device.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/videobuf2-vmalloc.h>
+
+#include "codec-v4l2-fwht.h"
+
+MODULE_DESCRIPTION("Virtual codec device");
+MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
+MODULE_LICENSE("GPL v2");
+
+static bool multiplanar;
+module_param(multiplanar, bool, 0444);
+MODULE_PARM_DESC(multiplanar,
+		 " use multi-planar API instead of single-planar API");
+
+static unsigned int debug;
+module_param(debug, uint, 0644);
+MODULE_PARM_DESC(debug, " activates debug info");
+
+#define VICODEC_NAME		"vicodec"
+#define MAX_WIDTH		4096U
+#define MIN_WIDTH		640U
+#define MAX_HEIGHT		2160U
+#define MIN_HEIGHT		360U
+
+#define dprintk(dev, fmt, arg...) \
+	v4l2_dbg(1, debug, &dev->v4l2_dev, "%s: " fmt, __func__, ## arg)
+
+
+struct pixfmt_info {
+	u32 id;
+	unsigned int bytesperline_mult;
+	unsigned int sizeimage_mult;
+	unsigned int sizeimage_div;
+	unsigned int luma_step;
+	unsigned int chroma_step;
+	/* Chroma plane subsampling */
+	unsigned int width_div;
+	unsigned int height_div;
+};
+
+static const struct v4l2_fwht_pixfmt_info pixfmt_fwht = {
+	V4L2_PIX_FMT_FWHT, 0, 3, 1, 1, 1, 1, 1, 0, 1
+};
+
+static const struct v4l2_fwht_pixfmt_info pixfmt_stateless_fwht = {
+	V4L2_PIX_FMT_FWHT_STATELESS, 0, 3, 1, 1, 1, 1, 1, 0, 1
+};
+
+static void vicodec_dev_release(struct device *dev)
+{
+}
+
+static struct platform_device vicodec_pdev = {
+	.name		= VICODEC_NAME,
+	.dev.release	= vicodec_dev_release,
+};
+
+/* Per-queue, driver-specific private data */
+struct vicodec_q_data {
+	unsigned int		coded_width;
+	unsigned int		coded_height;
+	unsigned int		visible_width;
+	unsigned int		visible_height;
+	unsigned int		sizeimage;
+	unsigned int		vb2_sizeimage;
+	unsigned int		sequence;
+	const struct v4l2_fwht_pixfmt_info *info;
+};
+
+enum {
+	V4L2_M2M_SRC = 0,
+	V4L2_M2M_DST = 1,
+};
+
+struct vicodec_dev_instance {
+	struct video_device     vfd;
+	struct mutex            mutex;
+	spinlock_t              lock;
+	struct v4l2_m2m_dev     *m2m_dev;
+};
+
+struct vicodec_dev {
+	struct v4l2_device	v4l2_dev;
+	struct vicodec_dev_instance stateful_enc;
+	struct vicodec_dev_instance stateful_dec;
+	struct vicodec_dev_instance stateless_dec;
+#ifdef CONFIG_MEDIA_CONTROLLER
+	struct media_device	mdev;
+#endif
+
+};
+
+struct vicodec_ctx {
+	struct v4l2_fh		fh;
+	struct vicodec_dev	*dev;
+	bool			is_enc;
+	bool			is_stateless;
+	spinlock_t		*lock;
+
+	struct v4l2_ctrl_handler hdl;
+
+	/* Source and destination queue data */
+	struct vicodec_q_data   q_data[2];
+	struct v4l2_fwht_state	state;
+
+	u32			cur_buf_offset;
+	u32			comp_max_size;
+	u32			comp_size;
+	u32			header_size;
+	u32			comp_magic_cnt;
+	bool			comp_has_frame;
+	bool			comp_has_next_frame;
+	bool			first_source_change_sent;
+	bool			source_changed;
+};
+
+static const struct v4l2_event vicodec_eos_event = {
+	.type = V4L2_EVENT_EOS
+};
+
+static inline struct vicodec_ctx *file2ctx(struct file *file)
+{
+	return container_of(file->private_data, struct vicodec_ctx, fh);
+}
+
+static struct vicodec_q_data *get_q_data(struct vicodec_ctx *ctx,
+					 enum v4l2_buf_type type)
+{
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+		return &ctx->q_data[V4L2_M2M_SRC];
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
+		return &ctx->q_data[V4L2_M2M_DST];
+	default:
+		break;
+	}
+	return NULL;
+}
+
+static void copy_cap_to_ref(const u8 *cap, const struct v4l2_fwht_pixfmt_info *info,
+		struct v4l2_fwht_state *state)
+{
+	int plane_idx;
+	u8 *p_ref = state->ref_frame.buf;
+	unsigned int cap_stride = state->stride;
+	unsigned int ref_stride = state->ref_stride;
+
+	for (plane_idx = 0; plane_idx < info->planes_num; plane_idx++) {
+		int i;
+		unsigned int h_div = (plane_idx == 1 || plane_idx == 2) ?
+			info->height_div : 1;
+		const u8 *row_cap = cap;
+		u8 *row_ref = p_ref;
+
+		if (info->planes_num == 3 && plane_idx == 1) {
+			cap_stride /= 2;
+			ref_stride /= 2;
+		}
+
+		if (plane_idx == 1 &&
+		    (info->id == V4L2_PIX_FMT_NV24 ||
+		     info->id == V4L2_PIX_FMT_NV42)) {
+			cap_stride *= 2;
+			ref_stride *= 2;
+		}
+
+		for (i = 0; i < state->visible_height / h_div; i++) {
+			memcpy(row_ref, row_cap, ref_stride);
+			row_ref += ref_stride;
+			row_cap += cap_stride;
+		}
+		cap += cap_stride * (state->coded_height / h_div);
+		p_ref += ref_stride * (state->coded_height / h_div);
+	}
+}
+
+static bool validate_by_version(unsigned int flags, unsigned int version)
+{
+	if (!version || version > FWHT_VERSION)
+		return false;
+
+	if (version >= 2) {
+		unsigned int components_num = 1 +
+			((flags & FWHT_FL_COMPONENTS_NUM_MSK) >>
+			 FWHT_FL_COMPONENTS_NUM_OFFSET);
+		unsigned int pixenc = flags & FWHT_FL_PIXENC_MSK;
+
+		if (components_num == 0 || components_num > 4 || !pixenc)
+			return false;
+	}
+	return true;
+}
+
+static bool validate_stateless_params_flags(const struct v4l2_ctrl_fwht_params *params,
+					    const struct v4l2_fwht_pixfmt_info *cur_info)
+{
+	unsigned int width_div =
+		(params->flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
+	unsigned int height_div =
+		(params->flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
+	unsigned int components_num = 3;
+	unsigned int pixenc = 0;
+
+	if (params->version < 3)
+		return false;
+
+	components_num = 1 + ((params->flags & FWHT_FL_COMPONENTS_NUM_MSK) >>
+			      FWHT_FL_COMPONENTS_NUM_OFFSET);
+	pixenc = (params->flags & FWHT_FL_PIXENC_MSK);
+	if (v4l2_fwht_validate_fmt(cur_info, width_div, height_div,
+				    components_num, pixenc))
+		return true;
+	return false;
+}
+
+
+static void update_state_from_header(struct vicodec_ctx *ctx)
+{
+	const struct fwht_cframe_hdr *p_hdr = &ctx->state.header;
+
+	ctx->state.visible_width = ntohl(p_hdr->width);
+	ctx->state.visible_height = ntohl(p_hdr->height);
+	ctx->state.colorspace = ntohl(p_hdr->colorspace);
+	ctx->state.xfer_func = ntohl(p_hdr->xfer_func);
+	ctx->state.ycbcr_enc = ntohl(p_hdr->ycbcr_enc);
+	ctx->state.quantization = ntohl(p_hdr->quantization);
+}
+
+static int device_process(struct vicodec_ctx *ctx,
+			  struct vb2_v4l2_buffer *src_vb,
+			  struct vb2_v4l2_buffer *dst_vb)
+{
+	struct vicodec_dev *dev = ctx->dev;
+	struct v4l2_fwht_state *state = &ctx->state;
+	u8 *p_src, *p_dst;
+	int ret = 0;
+
+	if (ctx->is_enc || ctx->is_stateless)
+		p_src = vb2_plane_vaddr(&src_vb->vb2_buf, 0);
+	else
+		p_src = state->compressed_frame;
+
+	if (ctx->is_stateless) {
+		struct media_request *src_req = src_vb->vb2_buf.req_obj.req;
+
+		ret = v4l2_ctrl_request_setup(src_req, &ctx->hdl);
+		if (ret)
+			return ret;
+		update_state_from_header(ctx);
+
+		ctx->state.header.size =
+			htonl(vb2_get_plane_payload(&src_vb->vb2_buf, 0));
+		/*
+		 * set the reference buffer from the reference timestamp
+		 * only if this is a P-frame
+		 */
+		if (!(ntohl(ctx->state.header.flags) & FWHT_FL_I_FRAME)) {
+			struct vb2_buffer *ref_vb2_buf;
+			int ref_buf_idx;
+			struct vb2_queue *vq_cap =
+				v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
+						V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+			ref_buf_idx = vb2_find_timestamp(vq_cap,
+							 ctx->state.ref_frame_ts, 0);
+			if (ref_buf_idx < 0)
+				return -EINVAL;
+
+			ref_vb2_buf = vq_cap->bufs[ref_buf_idx];
+			if (ref_vb2_buf->state == VB2_BUF_STATE_ERROR)
+				ret = -EINVAL;
+			ctx->state.ref_frame.buf =
+				vb2_plane_vaddr(ref_vb2_buf, 0);
+		} else {
+			ctx->state.ref_frame.buf = NULL;
+		}
+	}
+	p_dst = vb2_plane_vaddr(&dst_vb->vb2_buf, 0);
+	if (!p_src || !p_dst) {
+		v4l2_err(&dev->v4l2_dev,
+			 "Acquiring kernel pointers to buffers failed\n");
+		return -EFAULT;
+	}
+
+	if (ctx->is_enc) {
+		struct vicodec_q_data *q_src;
+		int comp_sz_or_errcode;
+
+		q_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+		state->info = q_src->info;
+		comp_sz_or_errcode = v4l2_fwht_encode(state, p_src, p_dst);
+		if (comp_sz_or_errcode < 0)
+			return comp_sz_or_errcode;
+		vb2_set_plane_payload(&dst_vb->vb2_buf, 0, comp_sz_or_errcode);
+	} else {
+		struct vicodec_q_data *q_dst;
+		unsigned int comp_frame_size = ntohl(ctx->state.header.size);
+
+		q_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+		if (comp_frame_size > ctx->comp_max_size)
+			return -EINVAL;
+		state->info = q_dst->info;
+		ret = v4l2_fwht_decode(state, p_src, p_dst);
+		if (ret < 0)
+			return ret;
+		if (!ctx->is_stateless)
+			copy_cap_to_ref(p_dst, ctx->state.info, &ctx->state);
+
+		vb2_set_plane_payload(&dst_vb->vb2_buf, 0, q_dst->sizeimage);
+		if (ntohl(ctx->state.header.flags) & FWHT_FL_I_FRAME)
+			dst_vb->flags |= V4L2_BUF_FLAG_KEYFRAME;
+		else
+			dst_vb->flags |= V4L2_BUF_FLAG_PFRAME;
+	}
+	return ret;
+}
+
+/*
+ * mem2mem callbacks
+ */
+static enum vb2_buffer_state get_next_header(struct vicodec_ctx *ctx,
+					     u8 **pp, u32 sz)
+{
+	static const u8 magic[] = {
+		0x4f, 0x4f, 0x4f, 0x4f, 0xff, 0xff, 0xff, 0xff
+	};
+	u8 *p = *pp;
+	u32 state;
+	u8 *header = (u8 *)&ctx->state.header;
+
+	state = VB2_BUF_STATE_DONE;
+
+	if (!ctx->header_size) {
+		state = VB2_BUF_STATE_ERROR;
+		for (; p < *pp + sz; p++) {
+			u32 copy;
+
+			p = memchr(p, magic[ctx->comp_magic_cnt],
+				   *pp + sz - p);
+			if (!p) {
+				ctx->comp_magic_cnt = 0;
+				p = *pp + sz;
+				break;
+			}
+			copy = sizeof(magic) - ctx->comp_magic_cnt;
+			if (*pp + sz - p < copy)
+				copy = *pp + sz - p;
+
+			memcpy(header + ctx->comp_magic_cnt, p, copy);
+			ctx->comp_magic_cnt += copy;
+			if (!memcmp(header, magic, ctx->comp_magic_cnt)) {
+				p += copy;
+				state = VB2_BUF_STATE_DONE;
+				break;
+			}
+			ctx->comp_magic_cnt = 0;
+		}
+		if (ctx->comp_magic_cnt < sizeof(magic)) {
+			*pp = p;
+			return state;
+		}
+		ctx->header_size = sizeof(magic);
+	}
+
+	if (ctx->header_size < sizeof(struct fwht_cframe_hdr)) {
+		u32 copy = sizeof(struct fwht_cframe_hdr) - ctx->header_size;
+
+		if (*pp + sz - p < copy)
+			copy = *pp + sz - p;
+
+		memcpy(header + ctx->header_size, p, copy);
+		p += copy;
+		ctx->header_size += copy;
+	}
+	*pp = p;
+	return state;
+}
+
+/* device_run() - prepares and starts the device */
+static void device_run(void *priv)
+{
+	struct vicodec_ctx *ctx = priv;
+	struct vicodec_dev *dev = ctx->dev;
+	struct vb2_v4l2_buffer *src_buf, *dst_buf;
+	struct vicodec_q_data *q_src, *q_dst;
+	u32 state;
+	struct media_request *src_req;
+
+	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+	dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+	src_req = src_buf->vb2_buf.req_obj.req;
+
+	q_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	q_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+	state = VB2_BUF_STATE_DONE;
+	if (device_process(ctx, src_buf, dst_buf))
+		state = VB2_BUF_STATE_ERROR;
+	else
+		dst_buf->sequence = q_dst->sequence++;
+	dst_buf->flags &= ~V4L2_BUF_FLAG_LAST;
+	v4l2_m2m_buf_copy_metadata(src_buf, dst_buf, false);
+
+	spin_lock(ctx->lock);
+	if (!ctx->comp_has_next_frame &&
+	    v4l2_m2m_is_last_draining_src_buf(ctx->fh.m2m_ctx, src_buf)) {
+		dst_buf->flags |= V4L2_BUF_FLAG_LAST;
+		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
+		v4l2_m2m_mark_stopped(ctx->fh.m2m_ctx);
+	}
+	if (ctx->is_enc || ctx->is_stateless) {
+		src_buf->sequence = q_src->sequence++;
+		src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+		v4l2_m2m_buf_done(src_buf, state);
+	} else if (vb2_get_plane_payload(&src_buf->vb2_buf, 0) == ctx->cur_buf_offset) {
+		src_buf->sequence = q_src->sequence++;
+		src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+		v4l2_m2m_buf_done(src_buf, state);
+		ctx->cur_buf_offset = 0;
+		ctx->comp_has_next_frame = false;
+	}
+	v4l2_m2m_buf_done(dst_buf, state);
+
+	ctx->comp_size = 0;
+	ctx->header_size = 0;
+	ctx->comp_magic_cnt = 0;
+	ctx->comp_has_frame = false;
+	spin_unlock(ctx->lock);
+	if (ctx->is_stateless && src_req)
+		v4l2_ctrl_request_complete(src_req, &ctx->hdl);
+
+	if (ctx->is_enc)
+		v4l2_m2m_job_finish(dev->stateful_enc.m2m_dev, ctx->fh.m2m_ctx);
+	else if (ctx->is_stateless)
+		v4l2_m2m_job_finish(dev->stateless_dec.m2m_dev,
+				    ctx->fh.m2m_ctx);
+	else
+		v4l2_m2m_job_finish(dev->stateful_dec.m2m_dev, ctx->fh.m2m_ctx);
+}
+
+static void job_remove_src_buf(struct vicodec_ctx *ctx, u32 state)
+{
+	struct vb2_v4l2_buffer *src_buf;
+	struct vicodec_q_data *q_src;
+
+	q_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	spin_lock(ctx->lock);
+	src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+	src_buf->sequence = q_src->sequence++;
+	v4l2_m2m_buf_done(src_buf, state);
+	ctx->cur_buf_offset = 0;
+	spin_unlock(ctx->lock);
+}
+
+static const struct v4l2_fwht_pixfmt_info *
+info_from_header(const struct fwht_cframe_hdr *p_hdr)
+{
+	unsigned int flags = ntohl(p_hdr->flags);
+	unsigned int width_div = (flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
+	unsigned int height_div = (flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
+	unsigned int components_num = 3;
+	unsigned int pixenc = 0;
+	unsigned int version = ntohl(p_hdr->version);
+
+	if (version >= 2) {
+		components_num = 1 + ((flags & FWHT_FL_COMPONENTS_NUM_MSK) >>
+				FWHT_FL_COMPONENTS_NUM_OFFSET);
+		pixenc = (flags & FWHT_FL_PIXENC_MSK);
+	}
+	return v4l2_fwht_find_nth_fmt(width_div, height_div,
+				     components_num, pixenc, 0);
+}
+
+static bool is_header_valid(const struct fwht_cframe_hdr *p_hdr)
+{
+	const struct v4l2_fwht_pixfmt_info *info;
+	unsigned int w = ntohl(p_hdr->width);
+	unsigned int h = ntohl(p_hdr->height);
+	unsigned int version = ntohl(p_hdr->version);
+	unsigned int flags = ntohl(p_hdr->flags);
+
+	if (w < MIN_WIDTH || w > MAX_WIDTH || h < MIN_HEIGHT || h > MAX_HEIGHT)
+		return false;
+
+	if (!validate_by_version(flags, version))
+		return false;
+
+	info = info_from_header(p_hdr);
+	if (!info)
+		return false;
+	return true;
+}
+
+static void update_capture_data_from_header(struct vicodec_ctx *ctx)
+{
+	struct vicodec_q_data *q_dst = get_q_data(ctx,
+						  V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	const struct fwht_cframe_hdr *p_hdr = &ctx->state.header;
+	const struct v4l2_fwht_pixfmt_info *info = info_from_header(p_hdr);
+	unsigned int flags = ntohl(p_hdr->flags);
+	unsigned int hdr_width_div = (flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
+	unsigned int hdr_height_div = (flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
+
+	/*
+	 * This function should not be used by a stateless codec since
+	 * it changes values in q_data that are not request specific
+	 */
+	WARN_ON(ctx->is_stateless);
+
+	q_dst->info = info;
+	q_dst->visible_width = ntohl(p_hdr->width);
+	q_dst->visible_height = ntohl(p_hdr->height);
+	q_dst->coded_width = vic_round_dim(q_dst->visible_width, hdr_width_div);
+	q_dst->coded_height = vic_round_dim(q_dst->visible_height,
+					    hdr_height_div);
+
+	q_dst->sizeimage = q_dst->coded_width * q_dst->coded_height *
+		q_dst->info->sizeimage_mult / q_dst->info->sizeimage_div;
+	ctx->state.colorspace = ntohl(p_hdr->colorspace);
+
+	ctx->state.xfer_func = ntohl(p_hdr->xfer_func);
+	ctx->state.ycbcr_enc = ntohl(p_hdr->ycbcr_enc);
+	ctx->state.quantization = ntohl(p_hdr->quantization);
+}
+
+static void set_last_buffer(struct vb2_v4l2_buffer *dst_buf,
+			    const struct vb2_v4l2_buffer *src_buf,
+			    struct vicodec_ctx *ctx)
+{
+	struct vicodec_q_data *q_dst = get_q_data(ctx,
+						  V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+	vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
+	dst_buf->sequence = q_dst->sequence++;
+
+	v4l2_m2m_buf_copy_metadata(src_buf, dst_buf, !ctx->is_enc);
+	dst_buf->flags |= V4L2_BUF_FLAG_LAST;
+	v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
+}
+
+static int job_ready(void *priv)
+{
+	static const u8 magic[] = {
+		0x4f, 0x4f, 0x4f, 0x4f, 0xff, 0xff, 0xff, 0xff
+	};
+	struct vicodec_ctx *ctx = priv;
+	struct vb2_v4l2_buffer *src_buf;
+	u8 *p_src;
+	u8 *p;
+	u32 sz;
+	u32 state;
+	struct vicodec_q_data *q_dst = get_q_data(ctx,
+						  V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	unsigned int flags;
+	unsigned int hdr_width_div;
+	unsigned int hdr_height_div;
+	unsigned int max_to_copy;
+	unsigned int comp_frame_size;
+
+	if (ctx->source_changed)
+		return 0;
+	if (ctx->is_stateless || ctx->is_enc || ctx->comp_has_frame)
+		return 1;
+
+restart:
+	ctx->comp_has_next_frame = false;
+	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+	if (!src_buf)
+		return 0;
+	p_src = vb2_plane_vaddr(&src_buf->vb2_buf, 0);
+	sz = vb2_get_plane_payload(&src_buf->vb2_buf, 0);
+	p = p_src + ctx->cur_buf_offset;
+
+	state = VB2_BUF_STATE_DONE;
+
+	if (ctx->header_size < sizeof(struct fwht_cframe_hdr)) {
+		state = get_next_header(ctx, &p, p_src + sz - p);
+		if (ctx->header_size < sizeof(struct fwht_cframe_hdr)) {
+			if (v4l2_m2m_is_last_draining_src_buf(ctx->fh.m2m_ctx,
+							      src_buf))
+				return 1;
+			job_remove_src_buf(ctx, state);
+			goto restart;
+		}
+	}
+
+	comp_frame_size = ntohl(ctx->state.header.size);
+
+	/*
+	 * The current scanned frame might be the first frame of a new
+	 * resolution so its size might be larger than ctx->comp_max_size.
+	 * In that case it is copied up to the current buffer capacity and
+	 * the copy will continue after allocating new large enough buffer
+	 * when restreaming
+	 */
+	max_to_copy = min(comp_frame_size, ctx->comp_max_size);
+
+	if (ctx->comp_size < max_to_copy) {
+		u32 copy = max_to_copy - ctx->comp_size;
+
+		if (copy > p_src + sz - p)
+			copy = p_src + sz - p;
+
+		memcpy(ctx->state.compressed_frame + ctx->comp_size,
+		       p, copy);
+		p += copy;
+		ctx->comp_size += copy;
+		if (ctx->comp_size < max_to_copy) {
+			if (v4l2_m2m_is_last_draining_src_buf(ctx->fh.m2m_ctx,
+							      src_buf))
+				return 1;
+			job_remove_src_buf(ctx, state);
+			goto restart;
+		}
+	}
+	ctx->cur_buf_offset = p - p_src;
+	if (ctx->comp_size == comp_frame_size)
+		ctx->comp_has_frame = true;
+	ctx->comp_has_next_frame = false;
+	if (ctx->comp_has_frame && sz - ctx->cur_buf_offset >=
+			sizeof(struct fwht_cframe_hdr)) {
+		struct fwht_cframe_hdr *p_hdr = (struct fwht_cframe_hdr *)p;
+		u32 frame_size = ntohl(p_hdr->size);
+		u32 remaining = sz - ctx->cur_buf_offset - sizeof(*p_hdr);
+
+		if (!memcmp(p, magic, sizeof(magic)))
+			ctx->comp_has_next_frame = remaining >= frame_size;
+	}
+	/*
+	 * if the header is invalid the device_run will just drop the frame
+	 * with an error
+	 */
+	if (!is_header_valid(&ctx->state.header) && ctx->comp_has_frame)
+		return 1;
+	flags = ntohl(ctx->state.header.flags);
+	hdr_width_div = (flags & FWHT_FL_CHROMA_FULL_WIDTH) ? 1 : 2;
+	hdr_height_div = (flags & FWHT_FL_CHROMA_FULL_HEIGHT) ? 1 : 2;
+
+	if (ntohl(ctx->state.header.width) != q_dst->visible_width ||
+	    ntohl(ctx->state.header.height) != q_dst->visible_height ||
+	    !q_dst->info ||
+	    hdr_width_div != q_dst->info->width_div ||
+	    hdr_height_div != q_dst->info->height_div) {
+		static const struct v4l2_event rs_event = {
+			.type = V4L2_EVENT_SOURCE_CHANGE,
+			.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
+		};
+
+		struct vb2_v4l2_buffer *dst_buf =
+			v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+
+		update_capture_data_from_header(ctx);
+		v4l2_event_queue_fh(&ctx->fh, &rs_event);
+		set_last_buffer(dst_buf, src_buf, ctx);
+		ctx->source_changed = true;
+		return 0;
+	}
+	return 1;
+}
+
+/*
+ * video ioctls
+ */
+
+static const struct v4l2_fwht_pixfmt_info *find_fmt(u32 fmt)
+{
+	const struct v4l2_fwht_pixfmt_info *info =
+		v4l2_fwht_find_pixfmt(fmt);
+
+	if (!info)
+		info = v4l2_fwht_get_pixfmt(0);
+	return info;
+}
+
+static int vidioc_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	strscpy(cap->driver, VICODEC_NAME, sizeof(cap->driver));
+	strscpy(cap->card, VICODEC_NAME, sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info),
+			"platform:%s", VICODEC_NAME);
+	return 0;
+}
+
+static int enum_fmt(struct v4l2_fmtdesc *f, struct vicodec_ctx *ctx,
+		    bool is_out)
+{
+	bool is_uncomp = (ctx->is_enc && is_out) || (!ctx->is_enc && !is_out);
+
+	if (V4L2_TYPE_IS_MULTIPLANAR(f->type) && !multiplanar)
+		return -EINVAL;
+	if (!V4L2_TYPE_IS_MULTIPLANAR(f->type) && multiplanar)
+		return -EINVAL;
+
+	if (is_uncomp) {
+		const struct v4l2_fwht_pixfmt_info *info =
+					get_q_data(ctx, f->type)->info;
+
+		if (ctx->is_enc ||
+		    !vb2_is_streaming(&ctx->fh.m2m_ctx->cap_q_ctx.q))
+			info = v4l2_fwht_get_pixfmt(f->index);
+		else
+			info = v4l2_fwht_find_nth_fmt(info->width_div,
+						     info->height_div,
+						     info->components_num,
+						     info->pixenc,
+						     f->index);
+		if (!info)
+			return -EINVAL;
+		f->pixelformat = info->id;
+	} else {
+		if (f->index)
+			return -EINVAL;
+		f->pixelformat = ctx->is_stateless ?
+			V4L2_PIX_FMT_FWHT_STATELESS : V4L2_PIX_FMT_FWHT;
+		if (!ctx->is_enc && !ctx->is_stateless)
+			f->flags = V4L2_FMT_FLAG_DYN_RESOLUTION |
+				   V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM;
+	}
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
+				   struct v4l2_fmtdesc *f)
+{
+	struct vicodec_ctx *ctx = file2ctx(file);
+
+	return enum_fmt(f, ctx, false);
+}
+
+static int vidioc_enum_fmt_vid_out(struct file *file, void *priv,
+				   struct v4l2_fmtdesc *f)
+{
+	struct vicodec_ctx *ctx = file2ctx(file);
+
+	return enum_fmt(f, ctx, true);
+}
+
+static int vidioc_g_fmt(struct vicodec_ctx *ctx, struct v4l2_format *f)
+{
+	struct vb2_queue *vq;
+	struct vicodec_q_data *q_data;
+	struct v4l2_pix_format_mplane *pix_mp;
+	struct v4l2_pix_format *pix;
+	const struct v4l2_fwht_pixfmt_info *info;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (!vq)
+		return -EINVAL;
+
+	q_data = get_q_data(ctx, f->type);
+	info = q_data->info;
+
+	switch (f->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		if (multiplanar)
+			return -EINVAL;
+		pix = &f->fmt.pix;
+		pix->width = q_data->coded_width;
+		pix->height = q_data->coded_height;
+		pix->field = V4L2_FIELD_NONE;
+		pix->pixelformat = info->id;
+		pix->bytesperline = q_data->coded_width *
+					info->bytesperline_mult;
+		pix->sizeimage = q_data->sizeimage;
+		pix->colorspace = ctx->state.colorspace;
+		pix->xfer_func = ctx->state.xfer_func;
+		pix->ycbcr_enc = ctx->state.ycbcr_enc;
+		pix->quantization = ctx->state.quantization;
+		break;
+
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+		if (!multiplanar)
+			return -EINVAL;
+		pix_mp = &f->fmt.pix_mp;
+		pix_mp->width = q_data->coded_width;
+		pix_mp->height = q_data->coded_height;
+		pix_mp->field = V4L2_FIELD_NONE;
+		pix_mp->pixelformat = info->id;
+		pix_mp->num_planes = 1;
+		pix_mp->plane_fmt[0].bytesperline =
+				q_data->coded_width * info->bytesperline_mult;
+		pix_mp->plane_fmt[0].sizeimage = q_data->sizeimage;
+		pix_mp->colorspace = ctx->state.colorspace;
+		pix_mp->xfer_func = ctx->state.xfer_func;
+		pix_mp->ycbcr_enc = ctx->state.ycbcr_enc;
+		pix_mp->quantization = ctx->state.quantization;
+		memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
+		memset(pix_mp->plane_fmt[0].reserved, 0,
+		       sizeof(pix_mp->plane_fmt[0].reserved));
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	return vidioc_g_fmt(file2ctx(file), f);
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	return vidioc_g_fmt(file2ctx(file), f);
+}
+
+static int vidioc_try_fmt(struct vicodec_ctx *ctx, struct v4l2_format *f)
+{
+	struct v4l2_pix_format_mplane *pix_mp;
+	struct v4l2_pix_format *pix;
+	struct v4l2_plane_pix_format *plane;
+	const struct v4l2_fwht_pixfmt_info *info = ctx->is_stateless ?
+		&pixfmt_stateless_fwht : &pixfmt_fwht;
+
+	switch (f->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		pix = &f->fmt.pix;
+		if (pix->pixelformat != V4L2_PIX_FMT_FWHT &&
+		    pix->pixelformat != V4L2_PIX_FMT_FWHT_STATELESS)
+			info = find_fmt(pix->pixelformat);
+
+		pix->width = clamp(pix->width, MIN_WIDTH, MAX_WIDTH);
+		pix->width = vic_round_dim(pix->width, info->width_div);
+
+		pix->height = clamp(pix->height, MIN_HEIGHT, MAX_HEIGHT);
+		pix->height = vic_round_dim(pix->height, info->height_div);
+
+		pix->field = V4L2_FIELD_NONE;
+		pix->bytesperline =
+			pix->width * info->bytesperline_mult;
+		pix->sizeimage = pix->width * pix->height *
+			info->sizeimage_mult / info->sizeimage_div;
+		if (pix->pixelformat == V4L2_PIX_FMT_FWHT)
+			pix->sizeimage += sizeof(struct fwht_cframe_hdr);
+		break;
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+		pix_mp = &f->fmt.pix_mp;
+		plane = pix_mp->plane_fmt;
+		if (pix_mp->pixelformat != V4L2_PIX_FMT_FWHT &&
+		    pix_mp->pixelformat != V4L2_PIX_FMT_FWHT_STATELESS)
+			info = find_fmt(pix_mp->pixelformat);
+		pix_mp->num_planes = 1;
+
+		pix_mp->width = clamp(pix_mp->width, MIN_WIDTH, MAX_WIDTH);
+		pix_mp->width = vic_round_dim(pix_mp->width, info->width_div);
+
+		pix_mp->height = clamp(pix_mp->height, MIN_HEIGHT, MAX_HEIGHT);
+		pix_mp->height = vic_round_dim(pix_mp->height,
+					       info->height_div);
+
+		pix_mp->field = V4L2_FIELD_NONE;
+		plane->bytesperline =
+			pix_mp->width * info->bytesperline_mult;
+		plane->sizeimage = pix_mp->width * pix_mp->height *
+			info->sizeimage_mult / info->sizeimage_div;
+		if (pix_mp->pixelformat == V4L2_PIX_FMT_FWHT)
+			plane->sizeimage += sizeof(struct fwht_cframe_hdr);
+		memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
+		memset(plane->reserved, 0, sizeof(plane->reserved));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vicodec_ctx *ctx = file2ctx(file);
+	struct v4l2_pix_format_mplane *pix_mp;
+	struct v4l2_pix_format *pix;
+
+	switch (f->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		if (multiplanar)
+			return -EINVAL;
+		pix = &f->fmt.pix;
+		pix->pixelformat = ctx->is_enc ? V4L2_PIX_FMT_FWHT :
+				   find_fmt(f->fmt.pix.pixelformat)->id;
+		pix->colorspace = ctx->state.colorspace;
+		pix->xfer_func = ctx->state.xfer_func;
+		pix->ycbcr_enc = ctx->state.ycbcr_enc;
+		pix->quantization = ctx->state.quantization;
+		break;
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
+		if (!multiplanar)
+			return -EINVAL;
+		pix_mp = &f->fmt.pix_mp;
+		pix_mp->pixelformat = ctx->is_enc ? V4L2_PIX_FMT_FWHT :
+				      find_fmt(pix_mp->pixelformat)->id;
+		pix_mp->colorspace = ctx->state.colorspace;
+		pix_mp->xfer_func = ctx->state.xfer_func;
+		pix_mp->ycbcr_enc = ctx->state.ycbcr_enc;
+		pix_mp->quantization = ctx->state.quantization;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return vidioc_try_fmt(ctx, f);
+}
+
+static int vidioc_try_fmt_vid_out(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vicodec_ctx *ctx = file2ctx(file);
+	struct v4l2_pix_format_mplane *pix_mp;
+	struct v4l2_pix_format *pix;
+
+	switch (f->type) {
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		if (multiplanar)
+			return -EINVAL;
+		pix = &f->fmt.pix;
+		if (ctx->is_enc)
+			pix->pixelformat = find_fmt(pix->pixelformat)->id;
+		else if (ctx->is_stateless)
+			pix->pixelformat = V4L2_PIX_FMT_FWHT_STATELESS;
+		else
+			pix->pixelformat = V4L2_PIX_FMT_FWHT;
+		if (!pix->colorspace)
+			pix->colorspace = V4L2_COLORSPACE_REC709;
+		break;
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+		if (!multiplanar)
+			return -EINVAL;
+		pix_mp = &f->fmt.pix_mp;
+		if (ctx->is_enc)
+			pix_mp->pixelformat = find_fmt(pix_mp->pixelformat)->id;
+		else if (ctx->is_stateless)
+			pix_mp->pixelformat = V4L2_PIX_FMT_FWHT_STATELESS;
+		else
+			pix_mp->pixelformat = V4L2_PIX_FMT_FWHT;
+		if (!pix_mp->colorspace)
+			pix_mp->colorspace = V4L2_COLORSPACE_REC709;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return vidioc_try_fmt(ctx, f);
+}
+
+static int vidioc_s_fmt(struct vicodec_ctx *ctx, struct v4l2_format *f)
+{
+	struct vicodec_q_data *q_data;
+	struct vb2_queue *vq;
+	bool fmt_changed = true;
+	struct v4l2_pix_format_mplane *pix_mp;
+	struct v4l2_pix_format *pix;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (!vq)
+		return -EINVAL;
+
+	q_data = get_q_data(ctx, f->type);
+	if (!q_data)
+		return -EINVAL;
+
+	switch (f->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		pix = &f->fmt.pix;
+		if (ctx->is_enc && V4L2_TYPE_IS_OUTPUT(f->type))
+			fmt_changed =
+				!q_data->info ||
+				q_data->info->id != pix->pixelformat ||
+				q_data->coded_width != pix->width ||
+				q_data->coded_height != pix->height;
+
+		if (vb2_is_busy(vq) && fmt_changed)
+			return -EBUSY;
+
+		if (pix->pixelformat == V4L2_PIX_FMT_FWHT)
+			q_data->info = &pixfmt_fwht;
+		else if (pix->pixelformat == V4L2_PIX_FMT_FWHT_STATELESS)
+			q_data->info = &pixfmt_stateless_fwht;
+		else
+			q_data->info = find_fmt(pix->pixelformat);
+		q_data->coded_width = pix->width;
+		q_data->coded_height = pix->height;
+		q_data->sizeimage = pix->sizeimage;
+		break;
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+		pix_mp = &f->fmt.pix_mp;
+		if (ctx->is_enc && V4L2_TYPE_IS_OUTPUT(f->type))
+			fmt_changed =
+				!q_data->info ||
+				q_data->info->id != pix_mp->pixelformat ||
+				q_data->coded_width != pix_mp->width ||
+				q_data->coded_height != pix_mp->height;
+
+		if (vb2_is_busy(vq) && fmt_changed)
+			return -EBUSY;
+
+		if (pix_mp->pixelformat == V4L2_PIX_FMT_FWHT)
+			q_data->info = &pixfmt_fwht;
+		else if (pix_mp->pixelformat == V4L2_PIX_FMT_FWHT_STATELESS)
+			q_data->info = &pixfmt_stateless_fwht;
+		else
+			q_data->info = find_fmt(pix_mp->pixelformat);
+		q_data->coded_width = pix_mp->width;
+		q_data->coded_height = pix_mp->height;
+		q_data->sizeimage = pix_mp->plane_fmt[0].sizeimage;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dprintk(ctx->dev,
+		"Setting format for type %d, coded wxh: %dx%d, fourcc: 0x%08x\n",
+		f->type, q_data->coded_width, q_data->coded_height,
+		q_data->info->id);
+
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	int ret;
+
+	ret = vidioc_try_fmt_vid_cap(file, priv, f);
+	if (ret)
+		return ret;
+
+	return vidioc_s_fmt(file2ctx(file), f);
+}
+
+static int vidioc_s_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct vicodec_ctx *ctx = file2ctx(file);
+	struct vicodec_q_data *q_data;
+	struct vicodec_q_data *q_data_cap;
+	struct v4l2_pix_format *pix;
+	struct v4l2_pix_format_mplane *pix_mp;
+	u32 coded_w = 0, coded_h = 0;
+	unsigned int size = 0;
+	int ret;
+
+	q_data = get_q_data(ctx, f->type);
+	q_data_cap = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+	ret = vidioc_try_fmt_vid_out(file, priv, f);
+	if (ret)
+		return ret;
+
+	if (ctx->is_enc) {
+		struct vb2_queue *vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+		struct vb2_queue *vq_cap = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
+							   V4L2_BUF_TYPE_VIDEO_CAPTURE);
+		const struct v4l2_fwht_pixfmt_info *info = ctx->is_stateless ?
+			&pixfmt_stateless_fwht : &pixfmt_fwht;
+
+		if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+			coded_w = f->fmt.pix.width;
+			coded_h = f->fmt.pix.height;
+		} else {
+			coded_w = f->fmt.pix_mp.width;
+			coded_h = f->fmt.pix_mp.height;
+		}
+		if (vb2_is_busy(vq) && (coded_w != q_data->coded_width ||
+					coded_h != q_data->coded_height))
+			return -EBUSY;
+		size = coded_w * coded_h *
+			info->sizeimage_mult / info->sizeimage_div;
+		if (!ctx->is_stateless)
+			size += sizeof(struct fwht_cframe_hdr);
+
+		if (vb2_is_busy(vq_cap) && size > q_data_cap->sizeimage)
+			return -EBUSY;
+	}
+
+	ret = vidioc_s_fmt(file2ctx(file), f);
+	if (!ret) {
+		if (ctx->is_enc) {
+			q_data->visible_width = coded_w;
+			q_data->visible_height = coded_h;
+			q_data_cap->coded_width = coded_w;
+			q_data_cap->coded_height = coded_h;
+			q_data_cap->sizeimage = size;
+		}
+
+		switch (f->type) {
+		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+			pix = &f->fmt.pix;
+			ctx->state.colorspace = pix->colorspace;
+			ctx->state.xfer_func = pix->xfer_func;
+			ctx->state.ycbcr_enc = pix->ycbcr_enc;
+			ctx->state.quantization = pix->quantization;
+			break;
+		case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+			pix_mp = &f->fmt.pix_mp;
+			ctx->state.colorspace = pix_mp->colorspace;
+			ctx->state.xfer_func = pix_mp->xfer_func;
+			ctx->state.ycbcr_enc = pix_mp->ycbcr_enc;
+			ctx->state.quantization = pix_mp->quantization;
+			break;
+		default:
+			break;
+		}
+	}
+	return ret;
+}
+
+static int vidioc_g_selection(struct file *file, void *priv,
+			      struct v4l2_selection *s)
+{
+	struct vicodec_ctx *ctx = file2ctx(file);
+	struct vicodec_q_data *q_data;
+
+	q_data = get_q_data(ctx, s->type);
+	if (!q_data)
+		return -EINVAL;
+	/*
+	 * encoder supports only cropping on the OUTPUT buffer
+	 * decoder supports only composing on the CAPTURE buffer
+	 */
+	if (ctx->is_enc && s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		switch (s->target) {
+		case V4L2_SEL_TGT_CROP:
+			s->r.left = 0;
+			s->r.top = 0;
+			s->r.width = q_data->visible_width;
+			s->r.height = q_data->visible_height;
+			return 0;
+		case V4L2_SEL_TGT_CROP_DEFAULT:
+		case V4L2_SEL_TGT_CROP_BOUNDS:
+			s->r.left = 0;
+			s->r.top = 0;
+			s->r.width = q_data->coded_width;
+			s->r.height = q_data->coded_height;
+			return 0;
+		}
+	} else if (!ctx->is_enc && s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		switch (s->target) {
+		case V4L2_SEL_TGT_COMPOSE:
+			s->r.left = 0;
+			s->r.top = 0;
+			s->r.width = q_data->visible_width;
+			s->r.height = q_data->visible_height;
+			return 0;
+		case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+		case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+			s->r.left = 0;
+			s->r.top = 0;
+			s->r.width = q_data->coded_width;
+			s->r.height = q_data->coded_height;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static int vidioc_s_selection(struct file *file, void *priv,
+			      struct v4l2_selection *s)
+{
+	struct vicodec_ctx *ctx = file2ctx(file);
+	struct vicodec_q_data *q_data;
+
+	if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
+		return -EINVAL;
+
+	q_data = get_q_data(ctx, s->type);
+	if (!q_data)
+		return -EINVAL;
+
+	if (!ctx->is_enc || s->target != V4L2_SEL_TGT_CROP)
+		return -EINVAL;
+
+	s->r.left = 0;
+	s->r.top = 0;
+	q_data->visible_width = clamp(s->r.width, MIN_WIDTH,
+				      q_data->coded_width);
+	s->r.width = q_data->visible_width;
+	q_data->visible_height = clamp(s->r.height, MIN_HEIGHT,
+				       q_data->coded_height);
+	s->r.height = q_data->visible_height;
+	return 0;
+}
+
+static int vicodec_encoder_cmd(struct file *file, void *fh,
+			    struct v4l2_encoder_cmd *ec)
+{
+	struct vicodec_ctx *ctx = file2ctx(file);
+	int ret;
+
+	ret = v4l2_m2m_ioctl_try_encoder_cmd(file, fh, ec);
+	if (ret < 0)
+		return ret;
+
+	if (!vb2_is_streaming(&ctx->fh.m2m_ctx->cap_q_ctx.q) ||
+	    !vb2_is_streaming(&ctx->fh.m2m_ctx->out_q_ctx.q))
+		return 0;
+
+	ret = v4l2_m2m_ioctl_encoder_cmd(file, fh, ec);
+	if (ret < 0)
+		return ret;
+
+	if (ec->cmd == V4L2_ENC_CMD_STOP &&
+	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
+		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
+
+	if (ec->cmd == V4L2_ENC_CMD_START &&
+	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
+		vb2_clear_last_buffer_dequeued(&ctx->fh.m2m_ctx->cap_q_ctx.q);
+
+	return 0;
+}
+
+static int vicodec_decoder_cmd(struct file *file, void *fh,
+			    struct v4l2_decoder_cmd *dc)
+{
+	struct vicodec_ctx *ctx = file2ctx(file);
+	int ret;
+
+	ret = v4l2_m2m_ioctl_try_decoder_cmd(file, fh, dc);
+	if (ret < 0)
+		return ret;
+
+	if (!vb2_is_streaming(&ctx->fh.m2m_ctx->cap_q_ctx.q) ||
+	    !vb2_is_streaming(&ctx->fh.m2m_ctx->out_q_ctx.q))
+		return 0;
+
+	ret = v4l2_m2m_ioctl_decoder_cmd(file, fh, dc);
+	if (ret < 0)
+		return ret;
+
+	if (dc->cmd == V4L2_DEC_CMD_STOP &&
+	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
+		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
+
+	if (dc->cmd == V4L2_DEC_CMD_START &&
+	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
+		vb2_clear_last_buffer_dequeued(&ctx->fh.m2m_ctx->cap_q_ctx.q);
+
+	return 0;
+}
+
+static int vicodec_enum_framesizes(struct file *file, void *fh,
+				   struct v4l2_frmsizeenum *fsize)
+{
+	switch (fsize->pixel_format) {
+	case V4L2_PIX_FMT_FWHT_STATELESS:
+		break;
+	case V4L2_PIX_FMT_FWHT:
+		break;
+	default:
+		if (find_fmt(fsize->pixel_format)->id == fsize->pixel_format)
+			break;
+		return -EINVAL;
+	}
+
+	if (fsize->index)
+		return -EINVAL;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
+
+	fsize->stepwise.min_width = MIN_WIDTH;
+	fsize->stepwise.max_width = MAX_WIDTH;
+	fsize->stepwise.step_width = 8;
+	fsize->stepwise.min_height = MIN_HEIGHT;
+	fsize->stepwise.max_height = MAX_HEIGHT;
+	fsize->stepwise.step_height = 8;
+
+	return 0;
+}
+
+static int vicodec_subscribe_event(struct v4l2_fh *fh,
+				const struct v4l2_event_subscription *sub)
+{
+	struct vicodec_ctx *ctx = container_of(fh, struct vicodec_ctx, fh);
+
+	switch (sub->type) {
+	case V4L2_EVENT_SOURCE_CHANGE:
+		if (ctx->is_enc)
+			return -EINVAL;
+		/* fall through */
+	case V4L2_EVENT_EOS:
+		if (ctx->is_stateless)
+			return -EINVAL;
+		return v4l2_event_subscribe(fh, sub, 0, NULL);
+	default:
+		return v4l2_ctrl_subscribe_event(fh, sub);
+	}
+}
+
+static const struct v4l2_ioctl_ops vicodec_ioctl_ops = {
+	.vidioc_querycap	= vidioc_querycap,
+
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap	= vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap	= vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap	= vidioc_s_fmt_vid_cap,
+
+	.vidioc_g_fmt_vid_cap_mplane	= vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap_mplane	= vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap_mplane	= vidioc_s_fmt_vid_cap,
+
+	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out,
+	.vidioc_g_fmt_vid_out	= vidioc_g_fmt_vid_out,
+	.vidioc_try_fmt_vid_out	= vidioc_try_fmt_vid_out,
+	.vidioc_s_fmt_vid_out	= vidioc_s_fmt_vid_out,
+
+	.vidioc_g_fmt_vid_out_mplane	= vidioc_g_fmt_vid_out,
+	.vidioc_try_fmt_vid_out_mplane	= vidioc_try_fmt_vid_out,
+	.vidioc_s_fmt_vid_out_mplane	= vidioc_s_fmt_vid_out,
+
+	.vidioc_reqbufs		= v4l2_m2m_ioctl_reqbufs,
+	.vidioc_querybuf	= v4l2_m2m_ioctl_querybuf,
+	.vidioc_qbuf		= v4l2_m2m_ioctl_qbuf,
+	.vidioc_dqbuf		= v4l2_m2m_ioctl_dqbuf,
+	.vidioc_prepare_buf	= v4l2_m2m_ioctl_prepare_buf,
+	.vidioc_create_bufs	= v4l2_m2m_ioctl_create_bufs,
+	.vidioc_expbuf		= v4l2_m2m_ioctl_expbuf,
+
+	.vidioc_streamon	= v4l2_m2m_ioctl_streamon,
+	.vidioc_streamoff	= v4l2_m2m_ioctl_streamoff,
+
+	.vidioc_g_selection	= vidioc_g_selection,
+	.vidioc_s_selection	= vidioc_s_selection,
+
+	.vidioc_try_encoder_cmd	= v4l2_m2m_ioctl_try_encoder_cmd,
+	.vidioc_encoder_cmd	= vicodec_encoder_cmd,
+	.vidioc_try_decoder_cmd	= v4l2_m2m_ioctl_try_decoder_cmd,
+	.vidioc_decoder_cmd	= vicodec_decoder_cmd,
+	.vidioc_enum_framesizes = vicodec_enum_framesizes,
+
+	.vidioc_subscribe_event = vicodec_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+
+/*
+ * Queue operations
+ */
+
+static int vicodec_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+			       unsigned int *nplanes, unsigned int sizes[],
+			       struct device *alloc_devs[])
+{
+	struct vicodec_ctx *ctx = vb2_get_drv_priv(vq);
+	struct vicodec_q_data *q_data = get_q_data(ctx, vq->type);
+	unsigned int size = q_data->sizeimage;
+
+	if (*nplanes)
+		return sizes[0] < size ? -EINVAL : 0;
+
+	*nplanes = 1;
+	sizes[0] = size;
+	q_data->vb2_sizeimage = size;
+	return 0;
+}
+
+static int vicodec_buf_out_validate(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+
+	vbuf->field = V4L2_FIELD_NONE;
+	return 0;
+}
+
+static int vicodec_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vicodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+	struct vicodec_q_data *q_data;
+
+	dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type);
+
+	q_data = get_q_data(ctx, vb->vb2_queue->type);
+	if (V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) {
+		if (vbuf->field == V4L2_FIELD_ANY)
+			vbuf->field = V4L2_FIELD_NONE;
+		if (vbuf->field != V4L2_FIELD_NONE) {
+			dprintk(ctx->dev, "%s field isn't supported\n",
+					__func__);
+			return -EINVAL;
+		}
+	}
+
+	if (vb2_plane_size(vb, 0) < q_data->vb2_sizeimage) {
+		dprintk(ctx->dev,
+			"%s data will not fit into plane (%lu < %lu)\n",
+			__func__, vb2_plane_size(vb, 0),
+			(long)q_data->vb2_sizeimage);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void vicodec_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vicodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned int sz = vb2_get_plane_payload(&vbuf->vb2_buf, 0);
+	u8 *p_src = vb2_plane_vaddr(&vbuf->vb2_buf, 0);
+	u8 *p = p_src;
+	struct vb2_queue *vq_out = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
+						   V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	struct vb2_queue *vq_cap = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
+						   V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	bool header_valid = false;
+	static const struct v4l2_event rs_event = {
+		.type = V4L2_EVENT_SOURCE_CHANGE,
+		.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
+	};
+
+	if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type) &&
+	    vb2_is_streaming(vb->vb2_queue) &&
+	    v4l2_m2m_dst_buf_is_last(ctx->fh.m2m_ctx)) {
+		unsigned int i;
+
+		for (i = 0; i < vb->num_planes; i++)
+			vb->planes[i].bytesused = 0;
+
+		vbuf->field = V4L2_FIELD_NONE;
+		vbuf->sequence =
+			get_q_data(ctx, vb->vb2_queue->type)->sequence++;
+
+		v4l2_m2m_last_buffer_done(ctx->fh.m2m_ctx, vbuf);
+		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
+		return;
+	}
+
+	/* buf_queue handles only the first source change event */
+	if (ctx->first_source_change_sent) {
+		v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
+		return;
+	}
+
+	/*
+	 * if both queues are streaming, the source change event is
+	 * handled in job_ready
+	 */
+	if (vb2_is_streaming(vq_cap) && vb2_is_streaming(vq_out)) {
+		v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
+		return;
+	}
+
+	/*
+	 * source change event is relevant only for the stateful decoder
+	 * in the compressed stream
+	 */
+	if (ctx->is_stateless || ctx->is_enc ||
+	    !V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) {
+		v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
+		return;
+	}
+
+	do {
+		enum vb2_buffer_state state =
+			get_next_header(ctx, &p, p_src + sz - p);
+
+		if (ctx->header_size < sizeof(struct fwht_cframe_hdr)) {
+			v4l2_m2m_buf_done(vbuf, state);
+			return;
+		}
+		header_valid = is_header_valid(&ctx->state.header);
+		/*
+		 * p points right after the end of the header in the
+		 * buffer. If the header is invalid we set p to point
+		 * to the next byte after the start of the header
+		 */
+		if (!header_valid) {
+			p = p - sizeof(struct fwht_cframe_hdr) + 1;
+			if (p < p_src)
+				p = p_src;
+			ctx->header_size = 0;
+			ctx->comp_magic_cnt = 0;
+		}
+
+	} while (!header_valid);
+
+	ctx->cur_buf_offset = p - p_src;
+	update_capture_data_from_header(ctx);
+	ctx->first_source_change_sent = true;
+	v4l2_event_queue_fh(&ctx->fh, &rs_event);
+	v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
+}
+
+static void vicodec_return_bufs(struct vb2_queue *q, u32 state)
+{
+	struct vicodec_ctx *ctx = vb2_get_drv_priv(q);
+	struct vb2_v4l2_buffer *vbuf;
+
+	for (;;) {
+		if (V4L2_TYPE_IS_OUTPUT(q->type))
+			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+		else
+			vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+		if (vbuf == NULL)
+			return;
+		v4l2_ctrl_request_complete(vbuf->vb2_buf.req_obj.req,
+					   &ctx->hdl);
+		spin_lock(ctx->lock);
+		v4l2_m2m_buf_done(vbuf, state);
+		spin_unlock(ctx->lock);
+	}
+}
+
+static unsigned int total_frame_size(struct vicodec_q_data *q_data)
+{
+	unsigned int size;
+	unsigned int chroma_div;
+
+	if (!q_data->info) {
+		WARN_ON(1);
+		return 0;
+	}
+	size = q_data->coded_width * q_data->coded_height;
+	chroma_div = q_data->info->width_div * q_data->info->height_div;
+
+	if (q_data->info->components_num == 4)
+		return 2 * size + 2 * (size / chroma_div);
+	else if (q_data->info->components_num == 3)
+		return size + 2 * (size / chroma_div);
+	return size;
+}
+
+static int vicodec_start_streaming(struct vb2_queue *q,
+				   unsigned int count)
+{
+	struct vicodec_ctx *ctx = vb2_get_drv_priv(q);
+	struct vicodec_q_data *q_data = get_q_data(ctx, q->type);
+	struct v4l2_fwht_state *state = &ctx->state;
+	const struct v4l2_fwht_pixfmt_info *info = q_data->info;
+	unsigned int size = q_data->coded_width * q_data->coded_height;
+	unsigned int chroma_div;
+	unsigned int total_planes_size;
+	u8 *new_comp_frame = NULL;
+
+	chroma_div = info->width_div * info->height_div;
+	q_data->sequence = 0;
+
+	v4l2_m2m_update_start_streaming_state(ctx->fh.m2m_ctx, q);
+
+	state->gop_cnt = 0;
+
+	if ((V4L2_TYPE_IS_OUTPUT(q->type) && !ctx->is_enc) ||
+	    (!V4L2_TYPE_IS_OUTPUT(q->type) && ctx->is_enc))
+		return 0;
+
+	if (info->id == V4L2_PIX_FMT_FWHT ||
+	    info->id == V4L2_PIX_FMT_FWHT_STATELESS) {
+		vicodec_return_bufs(q, VB2_BUF_STATE_QUEUED);
+		return -EINVAL;
+	}
+	total_planes_size = total_frame_size(q_data);
+	ctx->comp_max_size = total_planes_size;
+
+	state->visible_width = q_data->visible_width;
+	state->visible_height = q_data->visible_height;
+	state->coded_width = q_data->coded_width;
+	state->coded_height = q_data->coded_height;
+	state->stride = q_data->coded_width *
+				info->bytesperline_mult;
+
+	if (ctx->is_stateless) {
+		state->ref_stride = state->stride;
+		return 0;
+	}
+	state->ref_stride = q_data->coded_width * info->luma_alpha_step;
+
+	state->ref_frame.buf = kvmalloc(total_planes_size, GFP_KERNEL);
+	state->ref_frame.luma = state->ref_frame.buf;
+	new_comp_frame = kvmalloc(ctx->comp_max_size, GFP_KERNEL);
+
+	if (!state->ref_frame.luma || !new_comp_frame) {
+		kvfree(state->ref_frame.luma);
+		kvfree(new_comp_frame);
+		vicodec_return_bufs(q, VB2_BUF_STATE_QUEUED);
+		return -ENOMEM;
+	}
+	/*
+	 * if state->compressed_frame was already allocated then
+	 * it contain data of the first frame of the new resolution
+	 */
+	if (state->compressed_frame) {
+		if (ctx->comp_size > ctx->comp_max_size)
+			ctx->comp_size = ctx->comp_max_size;
+
+		memcpy(new_comp_frame,
+		       state->compressed_frame, ctx->comp_size);
+	}
+
+	kvfree(state->compressed_frame);
+	state->compressed_frame = new_comp_frame;
+
+	if (info->components_num < 3) {
+		state->ref_frame.cb = NULL;
+		state->ref_frame.cr = NULL;
+		state->ref_frame.alpha = NULL;
+		return 0;
+	}
+
+	state->ref_frame.cb = state->ref_frame.luma + size;
+	state->ref_frame.cr = state->ref_frame.cb + size / chroma_div;
+
+	if (info->components_num == 4)
+		state->ref_frame.alpha =
+			state->ref_frame.cr + size / chroma_div;
+	else
+		state->ref_frame.alpha = NULL;
+
+	return 0;
+}
+
+static void vicodec_stop_streaming(struct vb2_queue *q)
+{
+	struct vicodec_ctx *ctx = vb2_get_drv_priv(q);
+
+	vicodec_return_bufs(q, VB2_BUF_STATE_ERROR);
+
+	v4l2_m2m_update_stop_streaming_state(ctx->fh.m2m_ctx, q);
+
+	if (V4L2_TYPE_IS_OUTPUT(q->type) &&
+	    v4l2_m2m_has_stopped(ctx->fh.m2m_ctx))
+		v4l2_event_queue_fh(&ctx->fh, &vicodec_eos_event);
+
+	if (!ctx->is_enc && V4L2_TYPE_IS_OUTPUT(q->type))
+		ctx->first_source_change_sent = false;
+
+	if ((!V4L2_TYPE_IS_OUTPUT(q->type) && !ctx->is_enc) ||
+	    (V4L2_TYPE_IS_OUTPUT(q->type) && ctx->is_enc)) {
+		if (!ctx->is_stateless)
+			kvfree(ctx->state.ref_frame.buf);
+		ctx->state.ref_frame.buf = NULL;
+		ctx->state.ref_frame.luma = NULL;
+		ctx->comp_max_size = 0;
+		ctx->source_changed = false;
+	}
+	if (V4L2_TYPE_IS_OUTPUT(q->type) && !ctx->is_enc) {
+		ctx->cur_buf_offset = 0;
+		ctx->comp_size = 0;
+		ctx->header_size = 0;
+		ctx->comp_magic_cnt = 0;
+		ctx->comp_has_frame = 0;
+		ctx->comp_has_next_frame = 0;
+	}
+}
+
+static void vicodec_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vicodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->hdl);
+}
+
+
+static const struct vb2_ops vicodec_qops = {
+	.queue_setup		= vicodec_queue_setup,
+	.buf_out_validate	= vicodec_buf_out_validate,
+	.buf_prepare		= vicodec_buf_prepare,
+	.buf_queue		= vicodec_buf_queue,
+	.buf_request_complete	= vicodec_buf_request_complete,
+	.start_streaming	= vicodec_start_streaming,
+	.stop_streaming		= vicodec_stop_streaming,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+static int queue_init(void *priv, struct vb2_queue *src_vq,
+		      struct vb2_queue *dst_vq)
+{
+	struct vicodec_ctx *ctx = priv;
+	int ret;
+
+	src_vq->type = (multiplanar ?
+			V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :
+			V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+	src_vq->drv_priv = ctx;
+	src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+	src_vq->ops = &vicodec_qops;
+	src_vq->mem_ops = &vb2_vmalloc_memops;
+	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	if (ctx->is_enc)
+		src_vq->lock = &ctx->dev->stateful_enc.mutex;
+	else if (ctx->is_stateless)
+		src_vq->lock = &ctx->dev->stateless_dec.mutex;
+	else
+		src_vq->lock = &ctx->dev->stateful_dec.mutex;
+	src_vq->supports_requests = ctx->is_stateless;
+	src_vq->requires_requests = ctx->is_stateless;
+	ret = vb2_queue_init(src_vq);
+	if (ret)
+		return ret;
+
+	dst_vq->type = (multiplanar ?
+			V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :
+			V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+	dst_vq->drv_priv = ctx;
+	dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+	dst_vq->ops = &vicodec_qops;
+	dst_vq->mem_ops = &vb2_vmalloc_memops;
+	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	dst_vq->lock = src_vq->lock;
+
+	return vb2_queue_init(dst_vq);
+}
+
+static int vicodec_try_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vicodec_ctx *ctx = container_of(ctrl->handler,
+			struct vicodec_ctx, hdl);
+	const struct v4l2_ctrl_fwht_params *params;
+	struct vicodec_q_data *q_dst = get_q_data(ctx,
+			V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+	switch (ctrl->id) {
+	case V4L2_CID_MPEG_VIDEO_FWHT_PARAMS:
+		if (!q_dst->info)
+			return -EINVAL;
+		params = ctrl->p_new.p_fwht_params;
+		if (params->width > q_dst->coded_width ||
+		    params->width < MIN_WIDTH ||
+		    params->height > q_dst->coded_height ||
+		    params->height < MIN_HEIGHT)
+			return -EINVAL;
+		if (!validate_by_version(params->flags, params->version))
+			return -EINVAL;
+		if (!validate_stateless_params_flags(params, q_dst->info))
+			return -EINVAL;
+		return 0;
+	default:
+		return 0;
+	}
+	return 0;
+}
+
+static void update_header_from_stateless_params(struct vicodec_ctx *ctx,
+						const struct v4l2_ctrl_fwht_params *params)
+{
+	struct fwht_cframe_hdr *p_hdr = &ctx->state.header;
+
+	p_hdr->magic1 = FWHT_MAGIC1;
+	p_hdr->magic2 = FWHT_MAGIC2;
+	p_hdr->version = htonl(params->version);
+	p_hdr->width = htonl(params->width);
+	p_hdr->height = htonl(params->height);
+	p_hdr->flags = htonl(params->flags);
+	p_hdr->colorspace = htonl(params->colorspace);
+	p_hdr->xfer_func = htonl(params->xfer_func);
+	p_hdr->ycbcr_enc = htonl(params->ycbcr_enc);
+	p_hdr->quantization = htonl(params->quantization);
+}
+
+static int vicodec_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vicodec_ctx *ctx = container_of(ctrl->handler,
+					       struct vicodec_ctx, hdl);
+	const struct v4l2_ctrl_fwht_params *params;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
+		ctx->state.gop_size = ctrl->val;
+		return 0;
+	case V4L2_CID_FWHT_I_FRAME_QP:
+		ctx->state.i_frame_qp = ctrl->val;
+		return 0;
+	case V4L2_CID_FWHT_P_FRAME_QP:
+		ctx->state.p_frame_qp = ctrl->val;
+		return 0;
+	case V4L2_CID_MPEG_VIDEO_FWHT_PARAMS:
+		params = ctrl->p_new.p_fwht_params;
+		update_header_from_stateless_params(ctx, params);
+		ctx->state.ref_frame_ts = params->backward_ref_ts;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops vicodec_ctrl_ops = {
+	.s_ctrl = vicodec_s_ctrl,
+	.try_ctrl = vicodec_try_ctrl,
+};
+
+static const struct v4l2_ctrl_config vicodec_ctrl_stateless_state = {
+	.ops		= &vicodec_ctrl_ops,
+	.id		= V4L2_CID_MPEG_VIDEO_FWHT_PARAMS,
+	.elem_size      = sizeof(struct v4l2_ctrl_fwht_params),
+};
+
+/*
+ * File operations
+ */
+static int vicodec_open(struct file *file)
+{
+	const struct v4l2_fwht_pixfmt_info *info = v4l2_fwht_get_pixfmt(0);
+	struct video_device *vfd = video_devdata(file);
+	struct vicodec_dev *dev = video_drvdata(file);
+	struct vicodec_ctx *ctx = NULL;
+	struct v4l2_ctrl_handler *hdl;
+	unsigned int raw_size;
+	unsigned int comp_size;
+	int rc = 0;
+
+	if (mutex_lock_interruptible(vfd->lock))
+		return -ERESTARTSYS;
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx) {
+		rc = -ENOMEM;
+		goto open_unlock;
+	}
+
+	if (vfd == &dev->stateful_enc.vfd)
+		ctx->is_enc = true;
+	else if (vfd == &dev->stateless_dec.vfd)
+		ctx->is_stateless = true;
+
+	v4l2_fh_init(&ctx->fh, video_devdata(file));
+	file->private_data = &ctx->fh;
+	ctx->dev = dev;
+	hdl = &ctx->hdl;
+	v4l2_ctrl_handler_init(hdl, 5);
+	v4l2_ctrl_new_std(hdl, &vicodec_ctrl_ops, V4L2_CID_MPEG_VIDEO_GOP_SIZE,
+			  1, 16, 1, 10);
+	v4l2_ctrl_new_std(hdl, &vicodec_ctrl_ops, V4L2_CID_FWHT_I_FRAME_QP,
+			  1, 31, 1, 20);
+	v4l2_ctrl_new_std(hdl, &vicodec_ctrl_ops, V4L2_CID_FWHT_P_FRAME_QP,
+			  1, 31, 1, 20);
+	if (ctx->is_enc)
+		v4l2_ctrl_new_std(hdl, &vicodec_ctrl_ops,
+				  V4L2_CID_MIN_BUFFERS_FOR_OUTPUT, 1, 1, 1, 1);
+	if (ctx->is_stateless)
+		v4l2_ctrl_new_custom(hdl, &vicodec_ctrl_stateless_state, NULL);
+	if (hdl->error) {
+		rc = hdl->error;
+		v4l2_ctrl_handler_free(hdl);
+		kfree(ctx);
+		goto open_unlock;
+	}
+	ctx->fh.ctrl_handler = hdl;
+	v4l2_ctrl_handler_setup(hdl);
+
+	if (ctx->is_enc)
+		ctx->q_data[V4L2_M2M_SRC].info = info;
+	else if (ctx->is_stateless)
+		ctx->q_data[V4L2_M2M_SRC].info = &pixfmt_stateless_fwht;
+	else
+		ctx->q_data[V4L2_M2M_SRC].info = &pixfmt_fwht;
+	ctx->q_data[V4L2_M2M_SRC].coded_width = 1280;
+	ctx->q_data[V4L2_M2M_SRC].coded_height = 720;
+	ctx->q_data[V4L2_M2M_SRC].visible_width = 1280;
+	ctx->q_data[V4L2_M2M_SRC].visible_height = 720;
+	raw_size = 1280 * 720 * info->sizeimage_mult / info->sizeimage_div;
+	comp_size = 1280 * 720 * pixfmt_fwht.sizeimage_mult /
+				 pixfmt_fwht.sizeimage_div;
+	if (ctx->is_enc)
+		ctx->q_data[V4L2_M2M_SRC].sizeimage = raw_size;
+	else if (ctx->is_stateless)
+		ctx->q_data[V4L2_M2M_SRC].sizeimage = comp_size;
+	else
+		ctx->q_data[V4L2_M2M_SRC].sizeimage =
+			comp_size + sizeof(struct fwht_cframe_hdr);
+	ctx->q_data[V4L2_M2M_DST] = ctx->q_data[V4L2_M2M_SRC];
+	if (ctx->is_enc) {
+		ctx->q_data[V4L2_M2M_DST].info = &pixfmt_fwht;
+		ctx->q_data[V4L2_M2M_DST].sizeimage =
+			comp_size + sizeof(struct fwht_cframe_hdr);
+	} else {
+		ctx->q_data[V4L2_M2M_DST].info = info;
+		ctx->q_data[V4L2_M2M_DST].sizeimage = raw_size;
+	}
+
+	ctx->state.colorspace = V4L2_COLORSPACE_REC709;
+
+	if (ctx->is_enc) {
+		ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->stateful_enc.m2m_dev,
+						    ctx, &queue_init);
+		ctx->lock = &dev->stateful_enc.lock;
+	} else if (ctx->is_stateless) {
+		ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->stateless_dec.m2m_dev,
+						    ctx, &queue_init);
+		ctx->lock = &dev->stateless_dec.lock;
+	} else {
+		ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->stateful_dec.m2m_dev,
+						    ctx, &queue_init);
+		ctx->lock = &dev->stateful_dec.lock;
+	}
+
+	if (IS_ERR(ctx->fh.m2m_ctx)) {
+		rc = PTR_ERR(ctx->fh.m2m_ctx);
+
+		v4l2_ctrl_handler_free(hdl);
+		v4l2_fh_exit(&ctx->fh);
+		kfree(ctx);
+		goto open_unlock;
+	}
+
+	v4l2_fh_add(&ctx->fh);
+
+open_unlock:
+	mutex_unlock(vfd->lock);
+	return rc;
+}
+
+static int vicodec_release(struct file *file)
+{
+	struct video_device *vfd = video_devdata(file);
+	struct vicodec_ctx *ctx = file2ctx(file);
+
+	mutex_lock(vfd->lock);
+	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+	mutex_unlock(vfd->lock);
+	v4l2_fh_del(&ctx->fh);
+	v4l2_fh_exit(&ctx->fh);
+	v4l2_ctrl_handler_free(&ctx->hdl);
+	kvfree(ctx->state.compressed_frame);
+	kfree(ctx);
+
+	return 0;
+}
+
+static int vicodec_request_validate(struct media_request *req)
+{
+	struct media_request_object *obj;
+	struct v4l2_ctrl_handler *parent_hdl, *hdl;
+	struct vicodec_ctx *ctx = NULL;
+	struct v4l2_ctrl *ctrl;
+	unsigned int count;
+
+	list_for_each_entry(obj, &req->objects, list) {
+		struct vb2_buffer *vb;
+
+		if (vb2_request_object_is_buffer(obj)) {
+			vb = container_of(obj, struct vb2_buffer, req_obj);
+			ctx = vb2_get_drv_priv(vb->vb2_queue);
+
+			break;
+		}
+	}
+
+	if (!ctx) {
+		pr_err("No buffer was provided with the request\n");
+		return -ENOENT;
+	}
+
+	count = vb2_request_buffer_cnt(req);
+	if (!count) {
+		v4l2_info(&ctx->dev->v4l2_dev,
+			  "No buffer was provided with the request\n");
+		return -ENOENT;
+	} else if (count > 1) {
+		v4l2_info(&ctx->dev->v4l2_dev,
+			  "More than one buffer was provided with the request\n");
+		return -EINVAL;
+	}
+
+	parent_hdl = &ctx->hdl;
+
+	hdl = v4l2_ctrl_request_hdl_find(req, parent_hdl);
+	if (!hdl) {
+		v4l2_info(&ctx->dev->v4l2_dev, "Missing codec control\n");
+		return -ENOENT;
+	}
+	ctrl = v4l2_ctrl_request_hdl_ctrl_find(hdl,
+					       vicodec_ctrl_stateless_state.id);
+	if (!ctrl) {
+		v4l2_info(&ctx->dev->v4l2_dev,
+			  "Missing required codec control\n");
+		return -ENOENT;
+	}
+
+	return vb2_request_validate(req);
+}
+
+static const struct v4l2_file_operations vicodec_fops = {
+	.owner		= THIS_MODULE,
+	.open		= vicodec_open,
+	.release	= vicodec_release,
+	.poll		= v4l2_m2m_fop_poll,
+	.unlocked_ioctl	= video_ioctl2,
+	.mmap		= v4l2_m2m_fop_mmap,
+};
+
+static const struct video_device vicodec_videodev = {
+	.name		= VICODEC_NAME,
+	.vfl_dir	= VFL_DIR_M2M,
+	.fops		= &vicodec_fops,
+	.ioctl_ops	= &vicodec_ioctl_ops,
+	.minor		= -1,
+	.release	= video_device_release_empty,
+};
+
+static const struct media_device_ops vicodec_m2m_media_ops = {
+	.req_validate	= vicodec_request_validate,
+	.req_queue	= v4l2_m2m_request_queue,
+};
+
+static const struct v4l2_m2m_ops m2m_ops = {
+	.device_run	= device_run,
+	.job_ready	= job_ready,
+};
+
+static int register_instance(struct vicodec_dev *dev,
+			     struct vicodec_dev_instance *dev_instance,
+			     const char *name, bool is_enc)
+{
+	struct video_device *vfd;
+	int ret;
+
+	spin_lock_init(&dev_instance->lock);
+	mutex_init(&dev_instance->mutex);
+	dev_instance->m2m_dev = v4l2_m2m_init(&m2m_ops);
+	if (IS_ERR(dev_instance->m2m_dev)) {
+		v4l2_err(&dev->v4l2_dev, "Failed to init vicodec enc device\n");
+		return PTR_ERR(dev_instance->m2m_dev);
+	}
+
+	dev_instance->vfd = vicodec_videodev;
+	vfd = &dev_instance->vfd;
+	vfd->lock = &dev_instance->mutex;
+	vfd->v4l2_dev = &dev->v4l2_dev;
+	strscpy(vfd->name, name, sizeof(vfd->name));
+	vfd->device_caps = V4L2_CAP_STREAMING |
+		(multiplanar ? V4L2_CAP_VIDEO_M2M_MPLANE : V4L2_CAP_VIDEO_M2M);
+	if (is_enc) {
+		v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD);
+		v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD);
+	} else {
+		v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD);
+		v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD);
+	}
+	video_set_drvdata(vfd, dev);
+
+	ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register video device '%s'\n", name);
+		v4l2_m2m_release(dev_instance->m2m_dev);
+		return ret;
+	}
+	v4l2_info(&dev->v4l2_dev, "Device '%s' registered as /dev/video%d\n",
+		  name, vfd->num);
+	return 0;
+}
+
+static void vicodec_v4l2_dev_release(struct v4l2_device *v4l2_dev)
+{
+	struct vicodec_dev *dev = container_of(v4l2_dev, struct vicodec_dev, v4l2_dev);
+
+	v4l2_device_unregister(&dev->v4l2_dev);
+	v4l2_m2m_release(dev->stateful_enc.m2m_dev);
+	v4l2_m2m_release(dev->stateful_dec.m2m_dev);
+	v4l2_m2m_release(dev->stateless_dec.m2m_dev);
+#ifdef CONFIG_MEDIA_CONTROLLER
+	media_device_cleanup(&dev->mdev);
+#endif
+	kfree(dev);
+}
+
+static int vicodec_probe(struct platform_device *pdev)
+{
+	struct vicodec_dev *dev;
+	int ret;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
+	if (ret)
+		goto free_dev;
+
+	dev->v4l2_dev.release = vicodec_v4l2_dev_release;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	dev->mdev.dev = &pdev->dev;
+	strscpy(dev->mdev.model, "vicodec", sizeof(dev->mdev.model));
+	strscpy(dev->mdev.bus_info, "platform:vicodec",
+		sizeof(dev->mdev.bus_info));
+	media_device_init(&dev->mdev);
+	dev->mdev.ops = &vicodec_m2m_media_ops;
+	dev->v4l2_dev.mdev = &dev->mdev;
+#endif
+
+	platform_set_drvdata(pdev, dev);
+
+	ret = register_instance(dev, &dev->stateful_enc, "stateful-encoder",
+				true);
+	if (ret)
+		goto unreg_dev;
+
+	ret = register_instance(dev, &dev->stateful_dec, "stateful-decoder",
+				false);
+	if (ret)
+		goto unreg_sf_enc;
+
+	ret = register_instance(dev, &dev->stateless_dec, "stateless-decoder",
+				false);
+	if (ret)
+		goto unreg_sf_dec;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	ret = v4l2_m2m_register_media_controller(dev->stateful_enc.m2m_dev,
+						 &dev->stateful_enc.vfd,
+						 MEDIA_ENT_F_PROC_VIDEO_ENCODER);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller for enc\n");
+		goto unreg_m2m;
+	}
+
+	ret = v4l2_m2m_register_media_controller(dev->stateful_dec.m2m_dev,
+						 &dev->stateful_dec.vfd,
+						 MEDIA_ENT_F_PROC_VIDEO_DECODER);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller for dec\n");
+		goto unreg_m2m_sf_enc_mc;
+	}
+
+	ret = v4l2_m2m_register_media_controller(dev->stateless_dec.m2m_dev,
+						 &dev->stateless_dec.vfd,
+						 MEDIA_ENT_F_PROC_VIDEO_DECODER);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller for stateless dec\n");
+		goto unreg_m2m_sf_dec_mc;
+	}
+
+	ret = media_device_register(&dev->mdev);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register mem2mem media device\n");
+		goto unreg_m2m_sl_dec_mc;
+	}
+#endif
+	return 0;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+unreg_m2m_sl_dec_mc:
+	v4l2_m2m_unregister_media_controller(dev->stateless_dec.m2m_dev);
+unreg_m2m_sf_dec_mc:
+	v4l2_m2m_unregister_media_controller(dev->stateful_dec.m2m_dev);
+unreg_m2m_sf_enc_mc:
+	v4l2_m2m_unregister_media_controller(dev->stateful_enc.m2m_dev);
+unreg_m2m:
+	video_unregister_device(&dev->stateless_dec.vfd);
+	v4l2_m2m_release(dev->stateless_dec.m2m_dev);
+#endif
+unreg_sf_dec:
+	video_unregister_device(&dev->stateful_dec.vfd);
+	v4l2_m2m_release(dev->stateful_dec.m2m_dev);
+unreg_sf_enc:
+	video_unregister_device(&dev->stateful_enc.vfd);
+	v4l2_m2m_release(dev->stateful_enc.m2m_dev);
+unreg_dev:
+	v4l2_device_unregister(&dev->v4l2_dev);
+free_dev:
+	kfree(dev);
+
+	return ret;
+}
+
+static int vicodec_remove(struct platform_device *pdev)
+{
+	struct vicodec_dev *dev = platform_get_drvdata(pdev);
+
+	v4l2_info(&dev->v4l2_dev, "Removing " VICODEC_NAME);
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	media_device_unregister(&dev->mdev);
+	v4l2_m2m_unregister_media_controller(dev->stateful_enc.m2m_dev);
+	v4l2_m2m_unregister_media_controller(dev->stateful_dec.m2m_dev);
+	v4l2_m2m_unregister_media_controller(dev->stateless_dec.m2m_dev);
+#endif
+
+	video_unregister_device(&dev->stateful_enc.vfd);
+	video_unregister_device(&dev->stateful_dec.vfd);
+	video_unregister_device(&dev->stateless_dec.vfd);
+	v4l2_device_put(&dev->v4l2_dev);
+
+	return 0;
+}
+
+static struct platform_driver vicodec_pdrv = {
+	.probe		= vicodec_probe,
+	.remove		= vicodec_remove,
+	.driver		= {
+		.name	= VICODEC_NAME,
+	},
+};
+
+static void __exit vicodec_exit(void)
+{
+	platform_driver_unregister(&vicodec_pdrv);
+	platform_device_unregister(&vicodec_pdev);
+}
+
+static int __init vicodec_init(void)
+{
+	int ret;
+
+	ret = platform_device_register(&vicodec_pdev);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&vicodec_pdrv);
+	if (ret)
+		platform_device_unregister(&vicodec_pdev);
+
+	return ret;
+}
+
+module_init(vicodec_init);
+module_exit(vicodec_exit);
diff --git a/drivers/media/test-drivers/vim2m.c b/drivers/media/test-drivers/vim2m.c
new file mode 100644
index 000000000000..a776bb8e0e09
--- /dev/null
+++ b/drivers/media/test-drivers/vim2m.c
@@ -0,0 +1,1433 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * A virtual v4l2-mem2mem example device.
+ *
+ * This is a virtual device driver for testing mem-to-mem videobuf framework.
+ * It simulates a device that uses memory buffers for both source and
+ * destination, processes the data and issues an "irq" (simulated by a delayed
+ * workqueue).
+ * The device is capable of multi-instance, multi-buffer-per-transaction
+ * operation (via the mem2mem framework).
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Pawel Osciak, <pawel@osciak.com>
+ * Marek Szyprowski, <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version
+ */
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <linux/platform_device.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/videobuf2-vmalloc.h>
+
+MODULE_DESCRIPTION("Virtual device for mem2mem framework testing");
+MODULE_AUTHOR("Pawel Osciak, <pawel@osciak.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.2");
+MODULE_ALIAS("mem2mem_testdev");
+
+static unsigned int debug;
+module_param(debug, uint, 0644);
+MODULE_PARM_DESC(debug, "debug level");
+
+/* Default transaction time in msec */
+static unsigned int default_transtime = 40; /* Max 25 fps */
+module_param(default_transtime, uint, 0644);
+MODULE_PARM_DESC(default_transtime, "default transaction time in ms");
+
+#define MIN_W 32
+#define MIN_H 32
+#define MAX_W 640
+#define MAX_H 480
+
+/* Pixel alignment for non-bayer formats */
+#define WIDTH_ALIGN 2
+#define HEIGHT_ALIGN 1
+
+/* Pixel alignment for bayer formats */
+#define BAYER_WIDTH_ALIGN  2
+#define BAYER_HEIGHT_ALIGN 2
+
+/* Flags that indicate a format can be used for capture/output */
+#define MEM2MEM_CAPTURE	BIT(0)
+#define MEM2MEM_OUTPUT	BIT(1)
+
+#define MEM2MEM_NAME		"vim2m"
+
+/* Per queue */
+#define MEM2MEM_DEF_NUM_BUFS	VIDEO_MAX_FRAME
+/* In bytes, per queue */
+#define MEM2MEM_VID_MEM_LIMIT	(16 * 1024 * 1024)
+
+/* Flags that indicate processing mode */
+#define MEM2MEM_HFLIP	BIT(0)
+#define MEM2MEM_VFLIP	BIT(1)
+
+#define dprintk(dev, lvl, fmt, arg...) \
+	v4l2_dbg(lvl, debug, &(dev)->v4l2_dev, "%s: " fmt, __func__, ## arg)
+
+static void vim2m_dev_release(struct device *dev)
+{}
+
+static struct platform_device vim2m_pdev = {
+	.name		= MEM2MEM_NAME,
+	.dev.release	= vim2m_dev_release,
+};
+
+struct vim2m_fmt {
+	u32	fourcc;
+	int	depth;
+	/* Types the format can be used for */
+	u32     types;
+};
+
+static struct vim2m_fmt formats[] = {
+	{
+		.fourcc	= V4L2_PIX_FMT_RGB565,  /* rrrrrggg gggbbbbb */
+		.depth	= 16,
+		.types  = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_RGB565X, /* gggbbbbb rrrrrggg */
+		.depth	= 16,
+		.types  = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_RGB24,
+		.depth	= 24,
+		.types  = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_BGR24,
+		.depth	= 24,
+		.types  = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_YUYV,
+		.depth	= 16,
+		.types  = MEM2MEM_CAPTURE,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_SBGGR8,
+		.depth	= 8,
+		.types  = MEM2MEM_CAPTURE,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_SGBRG8,
+		.depth	= 8,
+		.types  = MEM2MEM_CAPTURE,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_SGRBG8,
+		.depth	= 8,
+		.types  = MEM2MEM_CAPTURE,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_SRGGB8,
+		.depth	= 8,
+		.types  = MEM2MEM_CAPTURE,
+	},
+};
+
+#define NUM_FORMATS ARRAY_SIZE(formats)
+
+/* Per-queue, driver-specific private data */
+struct vim2m_q_data {
+	unsigned int		width;
+	unsigned int		height;
+	unsigned int		sizeimage;
+	unsigned int		sequence;
+	struct vim2m_fmt	*fmt;
+};
+
+enum {
+	V4L2_M2M_SRC = 0,
+	V4L2_M2M_DST = 1,
+};
+
+#define V4L2_CID_TRANS_TIME_MSEC	(V4L2_CID_USER_BASE + 0x1000)
+#define V4L2_CID_TRANS_NUM_BUFS		(V4L2_CID_USER_BASE + 0x1001)
+
+static struct vim2m_fmt *find_format(u32 fourcc)
+{
+	struct vim2m_fmt *fmt;
+	unsigned int k;
+
+	for (k = 0; k < NUM_FORMATS; k++) {
+		fmt = &formats[k];
+		if (fmt->fourcc == fourcc)
+			break;
+	}
+
+	if (k == NUM_FORMATS)
+		return NULL;
+
+	return &formats[k];
+}
+
+static void get_alignment(u32 fourcc,
+			  unsigned int *walign, unsigned int *halign)
+{
+	switch (fourcc) {
+	case V4L2_PIX_FMT_SBGGR8:
+	case V4L2_PIX_FMT_SGBRG8:
+	case V4L2_PIX_FMT_SGRBG8:
+	case V4L2_PIX_FMT_SRGGB8:
+		*walign = BAYER_WIDTH_ALIGN;
+		*halign = BAYER_HEIGHT_ALIGN;
+		return;
+	default:
+		*walign = WIDTH_ALIGN;
+		*halign = HEIGHT_ALIGN;
+		return;
+	}
+}
+
+struct vim2m_dev {
+	struct v4l2_device	v4l2_dev;
+	struct video_device	vfd;
+#ifdef CONFIG_MEDIA_CONTROLLER
+	struct media_device	mdev;
+#endif
+
+	atomic_t		num_inst;
+	struct mutex		dev_mutex;
+
+	struct v4l2_m2m_dev	*m2m_dev;
+};
+
+struct vim2m_ctx {
+	struct v4l2_fh		fh;
+	struct vim2m_dev	*dev;
+
+	struct v4l2_ctrl_handler hdl;
+
+	/* Processed buffers in this transaction */
+	u8			num_processed;
+
+	/* Transaction length (i.e. how many buffers per transaction) */
+	u32			translen;
+	/* Transaction time (i.e. simulated processing time) in milliseconds */
+	u32			transtime;
+
+	struct mutex		vb_mutex;
+	struct delayed_work	work_run;
+
+	/* Abort requested by m2m */
+	int			aborting;
+
+	/* Processing mode */
+	int			mode;
+
+	enum v4l2_colorspace	colorspace;
+	enum v4l2_ycbcr_encoding ycbcr_enc;
+	enum v4l2_xfer_func	xfer_func;
+	enum v4l2_quantization	quant;
+
+	/* Source and destination queue data */
+	struct vim2m_q_data   q_data[2];
+};
+
+static inline struct vim2m_ctx *file2ctx(struct file *file)
+{
+	return container_of(file->private_data, struct vim2m_ctx, fh);
+}
+
+static struct vim2m_q_data *get_q_data(struct vim2m_ctx *ctx,
+				       enum v4l2_buf_type type)
+{
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		return &ctx->q_data[V4L2_M2M_SRC];
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		return &ctx->q_data[V4L2_M2M_DST];
+	default:
+		return NULL;
+	}
+}
+
+static const char *type_name(enum v4l2_buf_type type)
+{
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		return "Output";
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		return "Capture";
+	default:
+		return "Invalid";
+	}
+}
+
+#define CLIP(__color) \
+	(u8)(((__color) > 0xff) ? 0xff : (((__color) < 0) ? 0 : (__color)))
+
+static void copy_line(struct vim2m_q_data *q_data_out,
+		      u8 *src, u8 *dst, bool reverse)
+{
+	int x, depth = q_data_out->fmt->depth >> 3;
+
+	if (!reverse) {
+		memcpy(dst, src, q_data_out->width * depth);
+	} else {
+		for (x = 0; x < q_data_out->width >> 1; x++) {
+			memcpy(dst, src, depth);
+			memcpy(dst + depth, src - depth, depth);
+			src -= depth << 1;
+			dst += depth << 1;
+		}
+		return;
+	}
+}
+
+static void copy_two_pixels(struct vim2m_q_data *q_data_in,
+			    struct vim2m_q_data *q_data_out,
+			    u8 *src[2], u8 **dst, int ypos, bool reverse)
+{
+	struct vim2m_fmt *out = q_data_out->fmt;
+	struct vim2m_fmt *in = q_data_in->fmt;
+	u8 _r[2], _g[2], _b[2], *r, *g, *b;
+	int i;
+
+	/* Step 1: read two consecutive pixels from src pointer */
+
+	r = _r;
+	g = _g;
+	b = _b;
+
+	switch (in->fourcc) {
+	case V4L2_PIX_FMT_RGB565: /* rrrrrggg gggbbbbb */
+		for (i = 0; i < 2; i++) {
+			u16 pix = le16_to_cpu(*(__le16 *)(src[i]));
+
+			*r++ = (u8)(((pix & 0xf800) >> 11) << 3) | 0x07;
+			*g++ = (u8)((((pix & 0x07e0) >> 5)) << 2) | 0x03;
+			*b++ = (u8)((pix & 0x1f) << 3) | 0x07;
+		}
+		break;
+	case V4L2_PIX_FMT_RGB565X: /* gggbbbbb rrrrrggg */
+		for (i = 0; i < 2; i++) {
+			u16 pix = be16_to_cpu(*(__be16 *)(src[i]));
+
+			*r++ = (u8)(((pix & 0xf800) >> 11) << 3) | 0x07;
+			*g++ = (u8)((((pix & 0x07e0) >> 5)) << 2) | 0x03;
+			*b++ = (u8)((pix & 0x1f) << 3) | 0x07;
+		}
+		break;
+	default:
+	case V4L2_PIX_FMT_RGB24:
+		for (i = 0; i < 2; i++) {
+			*r++ = src[i][0];
+			*g++ = src[i][1];
+			*b++ = src[i][2];
+		}
+		break;
+	case V4L2_PIX_FMT_BGR24:
+		for (i = 0; i < 2; i++) {
+			*b++ = src[i][0];
+			*g++ = src[i][1];
+			*r++ = src[i][2];
+		}
+		break;
+	}
+
+	/* Step 2: store two consecutive points, reversing them if needed */
+
+	r = _r;
+	g = _g;
+	b = _b;
+
+	switch (out->fourcc) {
+	case V4L2_PIX_FMT_RGB565: /* rrrrrggg gggbbbbb */
+		for (i = 0; i < 2; i++) {
+			u16 pix;
+			__le16 *dst_pix = (__le16 *)*dst;
+
+			pix = ((*r << 8) & 0xf800) | ((*g << 3) & 0x07e0) |
+			      (*b >> 3);
+
+			*dst_pix = cpu_to_le16(pix);
+
+			*dst += 2;
+		}
+		return;
+	case V4L2_PIX_FMT_RGB565X: /* gggbbbbb rrrrrggg */
+		for (i = 0; i < 2; i++) {
+			u16 pix;
+			__be16 *dst_pix = (__be16 *)*dst;
+
+			pix = ((*r << 8) & 0xf800) | ((*g << 3) & 0x07e0) |
+			      (*b >> 3);
+
+			*dst_pix = cpu_to_be16(pix);
+
+			*dst += 2;
+		}
+		return;
+	case V4L2_PIX_FMT_RGB24:
+		for (i = 0; i < 2; i++) {
+			*(*dst)++ = *r++;
+			*(*dst)++ = *g++;
+			*(*dst)++ = *b++;
+		}
+		return;
+	case V4L2_PIX_FMT_BGR24:
+		for (i = 0; i < 2; i++) {
+			*(*dst)++ = *b++;
+			*(*dst)++ = *g++;
+			*(*dst)++ = *r++;
+		}
+		return;
+	case V4L2_PIX_FMT_YUYV:
+	default:
+	{
+		u8 y, y1, u, v;
+
+		y = ((8453  * (*r) + 16594 * (*g) +  3223 * (*b)
+		     + 524288) >> 15);
+		u = ((-4878 * (*r) - 9578  * (*g) + 14456 * (*b)
+		     + 4210688) >> 15);
+		v = ((14456 * (*r++) - 12105 * (*g++) - 2351 * (*b++)
+		     + 4210688) >> 15);
+		y1 = ((8453 * (*r) + 16594 * (*g) +  3223 * (*b)
+		     + 524288) >> 15);
+
+		*(*dst)++ = y;
+		*(*dst)++ = u;
+
+		*(*dst)++ = y1;
+		*(*dst)++ = v;
+		return;
+	}
+	case V4L2_PIX_FMT_SBGGR8:
+		if (!(ypos & 1)) {
+			*(*dst)++ = *b;
+			*(*dst)++ = *++g;
+		} else {
+			*(*dst)++ = *g;
+			*(*dst)++ = *++r;
+		}
+		return;
+	case V4L2_PIX_FMT_SGBRG8:
+		if (!(ypos & 1)) {
+			*(*dst)++ = *g;
+			*(*dst)++ = *++b;
+		} else {
+			*(*dst)++ = *r;
+			*(*dst)++ = *++g;
+		}
+		return;
+	case V4L2_PIX_FMT_SGRBG8:
+		if (!(ypos & 1)) {
+			*(*dst)++ = *g;
+			*(*dst)++ = *++r;
+		} else {
+			*(*dst)++ = *b;
+			*(*dst)++ = *++g;
+		}
+		return;
+	case V4L2_PIX_FMT_SRGGB8:
+		if (!(ypos & 1)) {
+			*(*dst)++ = *r;
+			*(*dst)++ = *++g;
+		} else {
+			*(*dst)++ = *g;
+			*(*dst)++ = *++b;
+		}
+		return;
+	}
+}
+
+static int device_process(struct vim2m_ctx *ctx,
+			  struct vb2_v4l2_buffer *in_vb,
+			  struct vb2_v4l2_buffer *out_vb)
+{
+	struct vim2m_dev *dev = ctx->dev;
+	struct vim2m_q_data *q_data_in, *q_data_out;
+	u8 *p_in, *p_line, *p_in_x[2], *p, *p_out;
+	unsigned int width, height, bytesperline, bytes_per_pixel;
+	unsigned int x, y, y_in, y_out, x_int, x_fract, x_err, x_offset;
+	int start, end, step;
+
+	q_data_in = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	if (!q_data_in)
+		return 0;
+	bytesperline = (q_data_in->width * q_data_in->fmt->depth) >> 3;
+	bytes_per_pixel = q_data_in->fmt->depth >> 3;
+
+	q_data_out = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	if (!q_data_out)
+		return 0;
+
+	/* As we're doing scaling, use the output dimensions here */
+	height = q_data_out->height;
+	width = q_data_out->width;
+
+	p_in = vb2_plane_vaddr(&in_vb->vb2_buf, 0);
+	p_out = vb2_plane_vaddr(&out_vb->vb2_buf, 0);
+	if (!p_in || !p_out) {
+		v4l2_err(&dev->v4l2_dev,
+			 "Acquiring kernel pointers to buffers failed\n");
+		return -EFAULT;
+	}
+
+	out_vb->sequence = q_data_out->sequence++;
+	in_vb->sequence = q_data_in->sequence++;
+	v4l2_m2m_buf_copy_metadata(in_vb, out_vb, true);
+
+	if (ctx->mode & MEM2MEM_VFLIP) {
+		start = height - 1;
+		end = -1;
+		step = -1;
+	} else {
+		start = 0;
+		end = height;
+		step = 1;
+	}
+	y_out = 0;
+
+	/*
+	 * When format and resolution are identical,
+	 * we can use a faster copy logic
+	 */
+	if (q_data_in->fmt->fourcc == q_data_out->fmt->fourcc &&
+	    q_data_in->width == q_data_out->width &&
+	    q_data_in->height == q_data_out->height) {
+		for (y = start; y != end; y += step, y_out++) {
+			p = p_in + (y * bytesperline);
+			if (ctx->mode & MEM2MEM_HFLIP)
+				p += bytesperline - (q_data_in->fmt->depth >> 3);
+
+			copy_line(q_data_out, p, p_out,
+				  ctx->mode & MEM2MEM_HFLIP);
+
+			p_out += bytesperline;
+		}
+		return 0;
+	}
+
+	/* Slower algorithm with format conversion, hflip, vflip and scaler */
+
+	/* To speed scaler up, use Bresenham for X dimension */
+	x_int = q_data_in->width / q_data_out->width;
+	x_fract = q_data_in->width % q_data_out->width;
+
+	for (y = start; y != end; y += step, y_out++) {
+		y_in = (y * q_data_in->height) / q_data_out->height;
+		x_offset = 0;
+		x_err = 0;
+
+		p_line = p_in + (y_in * bytesperline);
+		if (ctx->mode & MEM2MEM_HFLIP)
+			p_line += bytesperline - (q_data_in->fmt->depth >> 3);
+		p_in_x[0] = p_line;
+
+		for (x = 0; x < width >> 1; x++) {
+			x_offset += x_int;
+			x_err += x_fract;
+			if (x_err > width) {
+				x_offset++;
+				x_err -= width;
+			}
+
+			if (ctx->mode & MEM2MEM_HFLIP)
+				p_in_x[1] = p_line - x_offset * bytes_per_pixel;
+			else
+				p_in_x[1] = p_line + x_offset * bytes_per_pixel;
+
+			copy_two_pixels(q_data_in, q_data_out,
+					p_in_x, &p_out, y_out,
+					ctx->mode & MEM2MEM_HFLIP);
+
+			/* Calculate the next p_in_x0 */
+			x_offset += x_int;
+			x_err += x_fract;
+			if (x_err > width) {
+				x_offset++;
+				x_err -= width;
+			}
+
+			if (ctx->mode & MEM2MEM_HFLIP)
+				p_in_x[0] = p_line - x_offset * bytes_per_pixel;
+			else
+				p_in_x[0] = p_line + x_offset * bytes_per_pixel;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * mem2mem callbacks
+ */
+
+/*
+ * job_ready() - check whether an instance is ready to be scheduled to run
+ */
+static int job_ready(void *priv)
+{
+	struct vim2m_ctx *ctx = priv;
+
+	if (v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) < ctx->translen
+	    || v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx) < ctx->translen) {
+		dprintk(ctx->dev, 1, "Not enough buffers available\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+static void job_abort(void *priv)
+{
+	struct vim2m_ctx *ctx = priv;
+
+	/* Will cancel the transaction in the next interrupt handler */
+	ctx->aborting = 1;
+}
+
+/* device_run() - prepares and starts the device
+ *
+ * This simulates all the immediate preparations required before starting
+ * a device. This will be called by the framework when it decides to schedule
+ * a particular instance.
+ */
+static void device_run(void *priv)
+{
+	struct vim2m_ctx *ctx = priv;
+	struct vb2_v4l2_buffer *src_buf, *dst_buf;
+
+	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+
+	/* Apply request controls if any */
+	v4l2_ctrl_request_setup(src_buf->vb2_buf.req_obj.req,
+				&ctx->hdl);
+
+	device_process(ctx, src_buf, dst_buf);
+
+	/* Complete request controls if any */
+	v4l2_ctrl_request_complete(src_buf->vb2_buf.req_obj.req,
+				   &ctx->hdl);
+
+	/* Run delayed work, which simulates a hardware irq  */
+	schedule_delayed_work(&ctx->work_run, msecs_to_jiffies(ctx->transtime));
+}
+
+static void device_work(struct work_struct *w)
+{
+	struct vim2m_ctx *curr_ctx;
+	struct vim2m_dev *vim2m_dev;
+	struct vb2_v4l2_buffer *src_vb, *dst_vb;
+
+	curr_ctx = container_of(w, struct vim2m_ctx, work_run.work);
+
+	if (!curr_ctx) {
+		pr_err("Instance released before the end of transaction\n");
+		return;
+	}
+
+	vim2m_dev = curr_ctx->dev;
+
+	src_vb = v4l2_m2m_src_buf_remove(curr_ctx->fh.m2m_ctx);
+	dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->fh.m2m_ctx);
+
+	curr_ctx->num_processed++;
+
+	v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_DONE);
+	v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_DONE);
+
+	if (curr_ctx->num_processed == curr_ctx->translen
+	    || curr_ctx->aborting) {
+		dprintk(curr_ctx->dev, 2, "Finishing capture buffer fill\n");
+		curr_ctx->num_processed = 0;
+		v4l2_m2m_job_finish(vim2m_dev->m2m_dev, curr_ctx->fh.m2m_ctx);
+	} else {
+		device_run(curr_ctx);
+	}
+}
+
+/*
+ * video ioctls
+ */
+static int vidioc_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	strscpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver));
+	strscpy(cap->card, MEM2MEM_NAME, sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info),
+		 "platform:%s", MEM2MEM_NAME);
+	return 0;
+}
+
+static int enum_fmt(struct v4l2_fmtdesc *f, u32 type)
+{
+	int i, num;
+	struct vim2m_fmt *fmt;
+
+	num = 0;
+
+	for (i = 0; i < NUM_FORMATS; ++i) {
+		if (formats[i].types & type) {
+			/* index-th format of type type found ? */
+			if (num == f->index)
+				break;
+			/*
+			 * Correct type but haven't reached our index yet,
+			 * just increment per-type index
+			 */
+			++num;
+		}
+	}
+
+	if (i < NUM_FORMATS) {
+		/* Format found */
+		fmt = &formats[i];
+		f->pixelformat = fmt->fourcc;
+		return 0;
+	}
+
+	/* Format not found */
+	return -EINVAL;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
+				   struct v4l2_fmtdesc *f)
+{
+	return enum_fmt(f, MEM2MEM_CAPTURE);
+}
+
+static int vidioc_enum_fmt_vid_out(struct file *file, void *priv,
+				   struct v4l2_fmtdesc *f)
+{
+	return enum_fmt(f, MEM2MEM_OUTPUT);
+}
+
+static int vidioc_enum_framesizes(struct file *file, void *priv,
+				  struct v4l2_frmsizeenum *fsize)
+{
+	if (fsize->index != 0)
+		return -EINVAL;
+
+	if (!find_format(fsize->pixel_format))
+		return -EINVAL;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
+	fsize->stepwise.min_width = MIN_W;
+	fsize->stepwise.min_height = MIN_H;
+	fsize->stepwise.max_width = MAX_W;
+	fsize->stepwise.max_height = MAX_H;
+
+	get_alignment(fsize->pixel_format,
+		      &fsize->stepwise.step_width,
+		      &fsize->stepwise.step_height);
+	return 0;
+}
+
+static int vidioc_g_fmt(struct vim2m_ctx *ctx, struct v4l2_format *f)
+{
+	struct vb2_queue *vq;
+	struct vim2m_q_data *q_data;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (!vq)
+		return -EINVAL;
+
+	q_data = get_q_data(ctx, f->type);
+	if (!q_data)
+		return -EINVAL;
+
+	f->fmt.pix.width	= q_data->width;
+	f->fmt.pix.height	= q_data->height;
+	f->fmt.pix.field	= V4L2_FIELD_NONE;
+	f->fmt.pix.pixelformat	= q_data->fmt->fourcc;
+	f->fmt.pix.bytesperline	= (q_data->width * q_data->fmt->depth) >> 3;
+	f->fmt.pix.sizeimage	= q_data->sizeimage;
+	f->fmt.pix.colorspace	= ctx->colorspace;
+	f->fmt.pix.xfer_func	= ctx->xfer_func;
+	f->fmt.pix.ycbcr_enc	= ctx->ycbcr_enc;
+	f->fmt.pix.quantization	= ctx->quant;
+
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	return vidioc_g_fmt(file2ctx(file), f);
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	return vidioc_g_fmt(file2ctx(file), f);
+}
+
+static int vidioc_try_fmt(struct v4l2_format *f, struct vim2m_fmt *fmt)
+{
+	int walign, halign;
+	/*
+	 * V4L2 specification specifies the driver corrects the
+	 * format struct if any of the dimensions is unsupported
+	 */
+	if (f->fmt.pix.height < MIN_H)
+		f->fmt.pix.height = MIN_H;
+	else if (f->fmt.pix.height > MAX_H)
+		f->fmt.pix.height = MAX_H;
+
+	if (f->fmt.pix.width < MIN_W)
+		f->fmt.pix.width = MIN_W;
+	else if (f->fmt.pix.width > MAX_W)
+		f->fmt.pix.width = MAX_W;
+
+	get_alignment(f->fmt.pix.pixelformat, &walign, &halign);
+	f->fmt.pix.width &= ~(walign - 1);
+	f->fmt.pix.height &= ~(halign - 1);
+	f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3;
+	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
+	f->fmt.pix.field = V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vim2m_fmt *fmt;
+	struct vim2m_ctx *ctx = file2ctx(file);
+
+	fmt = find_format(f->fmt.pix.pixelformat);
+	if (!fmt) {
+		f->fmt.pix.pixelformat = formats[0].fourcc;
+		fmt = find_format(f->fmt.pix.pixelformat);
+	}
+	if (!(fmt->types & MEM2MEM_CAPTURE)) {
+		v4l2_err(&ctx->dev->v4l2_dev,
+			 "Fourcc format (0x%08x) invalid.\n",
+			 f->fmt.pix.pixelformat);
+		return -EINVAL;
+	}
+	f->fmt.pix.colorspace = ctx->colorspace;
+	f->fmt.pix.xfer_func = ctx->xfer_func;
+	f->fmt.pix.ycbcr_enc = ctx->ycbcr_enc;
+	f->fmt.pix.quantization = ctx->quant;
+
+	return vidioc_try_fmt(f, fmt);
+}
+
+static int vidioc_try_fmt_vid_out(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vim2m_fmt *fmt;
+	struct vim2m_ctx *ctx = file2ctx(file);
+
+	fmt = find_format(f->fmt.pix.pixelformat);
+	if (!fmt) {
+		f->fmt.pix.pixelformat = formats[0].fourcc;
+		fmt = find_format(f->fmt.pix.pixelformat);
+	}
+	if (!(fmt->types & MEM2MEM_OUTPUT)) {
+		v4l2_err(&ctx->dev->v4l2_dev,
+			 "Fourcc format (0x%08x) invalid.\n",
+			 f->fmt.pix.pixelformat);
+		return -EINVAL;
+	}
+	if (!f->fmt.pix.colorspace)
+		f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709;
+
+	return vidioc_try_fmt(f, fmt);
+}
+
+static int vidioc_s_fmt(struct vim2m_ctx *ctx, struct v4l2_format *f)
+{
+	struct vim2m_q_data *q_data;
+	struct vb2_queue *vq;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (!vq)
+		return -EINVAL;
+
+	q_data = get_q_data(ctx, f->type);
+	if (!q_data)
+		return -EINVAL;
+
+	if (vb2_is_busy(vq)) {
+		v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__);
+		return -EBUSY;
+	}
+
+	q_data->fmt		= find_format(f->fmt.pix.pixelformat);
+	q_data->width		= f->fmt.pix.width;
+	q_data->height		= f->fmt.pix.height;
+	q_data->sizeimage	= q_data->width * q_data->height
+				* q_data->fmt->depth >> 3;
+
+	dprintk(ctx->dev, 1,
+		"Format for type %s: %dx%d (%d bpp), fmt: %c%c%c%c\n",
+		type_name(f->type), q_data->width, q_data->height,
+		q_data->fmt->depth,
+		(q_data->fmt->fourcc & 0xff),
+		(q_data->fmt->fourcc >>  8) & 0xff,
+		(q_data->fmt->fourcc >> 16) & 0xff,
+		(q_data->fmt->fourcc >> 24) & 0xff);
+
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	int ret;
+
+	ret = vidioc_try_fmt_vid_cap(file, priv, f);
+	if (ret)
+		return ret;
+
+	return vidioc_s_fmt(file2ctx(file), f);
+}
+
+static int vidioc_s_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct vim2m_ctx *ctx = file2ctx(file);
+	int ret;
+
+	ret = vidioc_try_fmt_vid_out(file, priv, f);
+	if (ret)
+		return ret;
+
+	ret = vidioc_s_fmt(file2ctx(file), f);
+	if (!ret) {
+		ctx->colorspace = f->fmt.pix.colorspace;
+		ctx->xfer_func = f->fmt.pix.xfer_func;
+		ctx->ycbcr_enc = f->fmt.pix.ycbcr_enc;
+		ctx->quant = f->fmt.pix.quantization;
+	}
+	return ret;
+}
+
+static int vim2m_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vim2m_ctx *ctx =
+		container_of(ctrl->handler, struct vim2m_ctx, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_HFLIP:
+		if (ctrl->val)
+			ctx->mode |= MEM2MEM_HFLIP;
+		else
+			ctx->mode &= ~MEM2MEM_HFLIP;
+		break;
+
+	case V4L2_CID_VFLIP:
+		if (ctrl->val)
+			ctx->mode |= MEM2MEM_VFLIP;
+		else
+			ctx->mode &= ~MEM2MEM_VFLIP;
+		break;
+
+	case V4L2_CID_TRANS_TIME_MSEC:
+		ctx->transtime = ctrl->val;
+		if (ctx->transtime < 1)
+			ctx->transtime = 1;
+		break;
+
+	case V4L2_CID_TRANS_NUM_BUFS:
+		ctx->translen = ctrl->val;
+		break;
+
+	default:
+		v4l2_err(&ctx->dev->v4l2_dev, "Invalid control\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vim2m_ctrl_ops = {
+	.s_ctrl = vim2m_s_ctrl,
+};
+
+static const struct v4l2_ioctl_ops vim2m_ioctl_ops = {
+	.vidioc_querycap	= vidioc_querycap,
+
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_enum_framesizes = vidioc_enum_framesizes,
+	.vidioc_g_fmt_vid_cap	= vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap	= vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap	= vidioc_s_fmt_vid_cap,
+
+	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out,
+	.vidioc_g_fmt_vid_out	= vidioc_g_fmt_vid_out,
+	.vidioc_try_fmt_vid_out	= vidioc_try_fmt_vid_out,
+	.vidioc_s_fmt_vid_out	= vidioc_s_fmt_vid_out,
+
+	.vidioc_reqbufs		= v4l2_m2m_ioctl_reqbufs,
+	.vidioc_querybuf	= v4l2_m2m_ioctl_querybuf,
+	.vidioc_qbuf		= v4l2_m2m_ioctl_qbuf,
+	.vidioc_dqbuf		= v4l2_m2m_ioctl_dqbuf,
+	.vidioc_prepare_buf	= v4l2_m2m_ioctl_prepare_buf,
+	.vidioc_create_bufs	= v4l2_m2m_ioctl_create_bufs,
+	.vidioc_expbuf		= v4l2_m2m_ioctl_expbuf,
+
+	.vidioc_streamon	= v4l2_m2m_ioctl_streamon,
+	.vidioc_streamoff	= v4l2_m2m_ioctl_streamoff,
+
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/*
+ * Queue operations
+ */
+
+static int vim2m_queue_setup(struct vb2_queue *vq,
+			     unsigned int *nbuffers,
+			     unsigned int *nplanes,
+			     unsigned int sizes[],
+			     struct device *alloc_devs[])
+{
+	struct vim2m_ctx *ctx = vb2_get_drv_priv(vq);
+	struct vim2m_q_data *q_data;
+	unsigned int size, count = *nbuffers;
+
+	q_data = get_q_data(ctx, vq->type);
+	if (!q_data)
+		return -EINVAL;
+
+	size = q_data->width * q_data->height * q_data->fmt->depth >> 3;
+
+	while (size * count > MEM2MEM_VID_MEM_LIMIT)
+		(count)--;
+	*nbuffers = count;
+
+	if (*nplanes)
+		return sizes[0] < size ? -EINVAL : 0;
+
+	*nplanes = 1;
+	sizes[0] = size;
+
+	dprintk(ctx->dev, 1, "%s: get %d buffer(s) of size %d each.\n",
+		type_name(vq->type), count, size);
+
+	return 0;
+}
+
+static int vim2m_buf_out_validate(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vim2m_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+
+	if (vbuf->field == V4L2_FIELD_ANY)
+		vbuf->field = V4L2_FIELD_NONE;
+	if (vbuf->field != V4L2_FIELD_NONE) {
+		dprintk(ctx->dev, 1, "%s field isn't supported\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int vim2m_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vim2m_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+	struct vim2m_q_data *q_data;
+
+	dprintk(ctx->dev, 2, "type: %s\n", type_name(vb->vb2_queue->type));
+
+	q_data = get_q_data(ctx, vb->vb2_queue->type);
+	if (!q_data)
+		return -EINVAL;
+	if (vb2_plane_size(vb, 0) < q_data->sizeimage) {
+		dprintk(ctx->dev, 1,
+			"%s data will not fit into plane (%lu < %lu)\n",
+			__func__, vb2_plane_size(vb, 0),
+			(long)q_data->sizeimage);
+		return -EINVAL;
+	}
+
+	vb2_set_plane_payload(vb, 0, q_data->sizeimage);
+
+	return 0;
+}
+
+static void vim2m_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vim2m_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
+}
+
+static int vim2m_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct vim2m_ctx *ctx = vb2_get_drv_priv(q);
+	struct vim2m_q_data *q_data = get_q_data(ctx, q->type);
+
+	if (!q_data)
+		return -EINVAL;
+
+	if (V4L2_TYPE_IS_OUTPUT(q->type))
+		ctx->aborting = 0;
+
+	q_data->sequence = 0;
+	return 0;
+}
+
+static void vim2m_stop_streaming(struct vb2_queue *q)
+{
+	struct vim2m_ctx *ctx = vb2_get_drv_priv(q);
+	struct vb2_v4l2_buffer *vbuf;
+
+	cancel_delayed_work_sync(&ctx->work_run);
+
+	for (;;) {
+		if (V4L2_TYPE_IS_OUTPUT(q->type))
+			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+		else
+			vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+		if (!vbuf)
+			return;
+		v4l2_ctrl_request_complete(vbuf->vb2_buf.req_obj.req,
+					   &ctx->hdl);
+		v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
+	}
+}
+
+static void vim2m_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vim2m_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->hdl);
+}
+
+static const struct vb2_ops vim2m_qops = {
+	.queue_setup	 = vim2m_queue_setup,
+	.buf_out_validate	 = vim2m_buf_out_validate,
+	.buf_prepare	 = vim2m_buf_prepare,
+	.buf_queue	 = vim2m_buf_queue,
+	.start_streaming = vim2m_start_streaming,
+	.stop_streaming  = vim2m_stop_streaming,
+	.wait_prepare	 = vb2_ops_wait_prepare,
+	.wait_finish	 = vb2_ops_wait_finish,
+	.buf_request_complete = vim2m_buf_request_complete,
+};
+
+static int queue_init(void *priv, struct vb2_queue *src_vq,
+		      struct vb2_queue *dst_vq)
+{
+	struct vim2m_ctx *ctx = priv;
+	int ret;
+
+	src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+	src_vq->drv_priv = ctx;
+	src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+	src_vq->ops = &vim2m_qops;
+	src_vq->mem_ops = &vb2_vmalloc_memops;
+	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	src_vq->lock = &ctx->vb_mutex;
+	src_vq->supports_requests = true;
+
+	ret = vb2_queue_init(src_vq);
+	if (ret)
+		return ret;
+
+	dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+	dst_vq->drv_priv = ctx;
+	dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+	dst_vq->ops = &vim2m_qops;
+	dst_vq->mem_ops = &vb2_vmalloc_memops;
+	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	dst_vq->lock = &ctx->vb_mutex;
+
+	return vb2_queue_init(dst_vq);
+}
+
+static struct v4l2_ctrl_config vim2m_ctrl_trans_time_msec = {
+	.ops = &vim2m_ctrl_ops,
+	.id = V4L2_CID_TRANS_TIME_MSEC,
+	.name = "Transaction Time (msec)",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 1,
+	.max = 10001,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vim2m_ctrl_trans_num_bufs = {
+	.ops = &vim2m_ctrl_ops,
+	.id = V4L2_CID_TRANS_NUM_BUFS,
+	.name = "Buffers Per Transaction",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.def = 1,
+	.min = 1,
+	.max = MEM2MEM_DEF_NUM_BUFS,
+	.step = 1,
+};
+
+/*
+ * File operations
+ */
+static int vim2m_open(struct file *file)
+{
+	struct vim2m_dev *dev = video_drvdata(file);
+	struct vim2m_ctx *ctx = NULL;
+	struct v4l2_ctrl_handler *hdl;
+	int rc = 0;
+
+	if (mutex_lock_interruptible(&dev->dev_mutex))
+		return -ERESTARTSYS;
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx) {
+		rc = -ENOMEM;
+		goto open_unlock;
+	}
+
+	v4l2_fh_init(&ctx->fh, video_devdata(file));
+	file->private_data = &ctx->fh;
+	ctx->dev = dev;
+	hdl = &ctx->hdl;
+	v4l2_ctrl_handler_init(hdl, 4);
+	v4l2_ctrl_new_std(hdl, &vim2m_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(hdl, &vim2m_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
+
+	vim2m_ctrl_trans_time_msec.def = default_transtime;
+	v4l2_ctrl_new_custom(hdl, &vim2m_ctrl_trans_time_msec, NULL);
+	v4l2_ctrl_new_custom(hdl, &vim2m_ctrl_trans_num_bufs, NULL);
+	if (hdl->error) {
+		rc = hdl->error;
+		v4l2_ctrl_handler_free(hdl);
+		kfree(ctx);
+		goto open_unlock;
+	}
+	ctx->fh.ctrl_handler = hdl;
+	v4l2_ctrl_handler_setup(hdl);
+
+	ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0];
+	ctx->q_data[V4L2_M2M_SRC].width = 640;
+	ctx->q_data[V4L2_M2M_SRC].height = 480;
+	ctx->q_data[V4L2_M2M_SRC].sizeimage =
+		ctx->q_data[V4L2_M2M_SRC].width *
+		ctx->q_data[V4L2_M2M_SRC].height *
+		(ctx->q_data[V4L2_M2M_SRC].fmt->depth >> 3);
+	ctx->q_data[V4L2_M2M_DST] = ctx->q_data[V4L2_M2M_SRC];
+	ctx->colorspace = V4L2_COLORSPACE_REC709;
+
+	ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
+
+	mutex_init(&ctx->vb_mutex);
+	INIT_DELAYED_WORK(&ctx->work_run, device_work);
+
+	if (IS_ERR(ctx->fh.m2m_ctx)) {
+		rc = PTR_ERR(ctx->fh.m2m_ctx);
+
+		v4l2_ctrl_handler_free(hdl);
+		v4l2_fh_exit(&ctx->fh);
+		kfree(ctx);
+		goto open_unlock;
+	}
+
+	v4l2_fh_add(&ctx->fh);
+	atomic_inc(&dev->num_inst);
+
+	dprintk(dev, 1, "Created instance: %p, m2m_ctx: %p\n",
+		ctx, ctx->fh.m2m_ctx);
+
+open_unlock:
+	mutex_unlock(&dev->dev_mutex);
+	return rc;
+}
+
+static int vim2m_release(struct file *file)
+{
+	struct vim2m_dev *dev = video_drvdata(file);
+	struct vim2m_ctx *ctx = file2ctx(file);
+
+	dprintk(dev, 1, "Releasing instance %p\n", ctx);
+
+	v4l2_fh_del(&ctx->fh);
+	v4l2_fh_exit(&ctx->fh);
+	v4l2_ctrl_handler_free(&ctx->hdl);
+	mutex_lock(&dev->dev_mutex);
+	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+	mutex_unlock(&dev->dev_mutex);
+	kfree(ctx);
+
+	atomic_dec(&dev->num_inst);
+
+	return 0;
+}
+
+static void vim2m_device_release(struct video_device *vdev)
+{
+	struct vim2m_dev *dev = container_of(vdev, struct vim2m_dev, vfd);
+
+	v4l2_device_unregister(&dev->v4l2_dev);
+	v4l2_m2m_release(dev->m2m_dev);
+#ifdef CONFIG_MEDIA_CONTROLLER
+	media_device_cleanup(&dev->mdev);
+#endif
+	kfree(dev);
+}
+
+static const struct v4l2_file_operations vim2m_fops = {
+	.owner		= THIS_MODULE,
+	.open		= vim2m_open,
+	.release	= vim2m_release,
+	.poll		= v4l2_m2m_fop_poll,
+	.unlocked_ioctl	= video_ioctl2,
+	.mmap		= v4l2_m2m_fop_mmap,
+};
+
+static const struct video_device vim2m_videodev = {
+	.name		= MEM2MEM_NAME,
+	.vfl_dir	= VFL_DIR_M2M,
+	.fops		= &vim2m_fops,
+	.ioctl_ops	= &vim2m_ioctl_ops,
+	.minor		= -1,
+	.release	= vim2m_device_release,
+	.device_caps	= V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING,
+};
+
+static const struct v4l2_m2m_ops m2m_ops = {
+	.device_run	= device_run,
+	.job_ready	= job_ready,
+	.job_abort	= job_abort,
+};
+
+static const struct media_device_ops m2m_media_ops = {
+	.req_validate = vb2_request_validate,
+	.req_queue = v4l2_m2m_request_queue,
+};
+
+static int vim2m_probe(struct platform_device *pdev)
+{
+	struct vim2m_dev *dev;
+	struct video_device *vfd;
+	int ret;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
+	if (ret)
+		goto error_free;
+
+	atomic_set(&dev->num_inst, 0);
+	mutex_init(&dev->dev_mutex);
+
+	dev->vfd = vim2m_videodev;
+	vfd = &dev->vfd;
+	vfd->lock = &dev->dev_mutex;
+	vfd->v4l2_dev = &dev->v4l2_dev;
+
+	ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+		goto error_v4l2;
+	}
+
+	video_set_drvdata(vfd, dev);
+	v4l2_info(&dev->v4l2_dev,
+		  "Device registered as /dev/video%d\n", vfd->num);
+
+	platform_set_drvdata(pdev, dev);
+
+	dev->m2m_dev = v4l2_m2m_init(&m2m_ops);
+	if (IS_ERR(dev->m2m_dev)) {
+		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n");
+		ret = PTR_ERR(dev->m2m_dev);
+		dev->m2m_dev = NULL;
+		goto error_dev;
+	}
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	dev->mdev.dev = &pdev->dev;
+	strscpy(dev->mdev.model, "vim2m", sizeof(dev->mdev.model));
+	strscpy(dev->mdev.bus_info, "platform:vim2m",
+		sizeof(dev->mdev.bus_info));
+	media_device_init(&dev->mdev);
+	dev->mdev.ops = &m2m_media_ops;
+	dev->v4l2_dev.mdev = &dev->mdev;
+
+	ret = v4l2_m2m_register_media_controller(dev->m2m_dev, vfd,
+						 MEDIA_ENT_F_PROC_VIDEO_SCALER);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller\n");
+		goto error_dev;
+	}
+
+	ret = media_device_register(&dev->mdev);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register mem2mem media device\n");
+		goto error_m2m_mc;
+	}
+#endif
+	return 0;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+error_m2m_mc:
+	v4l2_m2m_unregister_media_controller(dev->m2m_dev);
+#endif
+error_dev:
+	video_unregister_device(&dev->vfd);
+	/* vim2m_device_release called by video_unregister_device to release various objects */
+	return ret;
+error_v4l2:
+	v4l2_device_unregister(&dev->v4l2_dev);
+error_free:
+	kfree(dev);
+
+	return ret;
+}
+
+static int vim2m_remove(struct platform_device *pdev)
+{
+	struct vim2m_dev *dev = platform_get_drvdata(pdev);
+
+	v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME);
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	media_device_unregister(&dev->mdev);
+	v4l2_m2m_unregister_media_controller(dev->m2m_dev);
+#endif
+	video_unregister_device(&dev->vfd);
+
+	return 0;
+}
+
+static struct platform_driver vim2m_pdrv = {
+	.probe		= vim2m_probe,
+	.remove		= vim2m_remove,
+	.driver		= {
+		.name	= MEM2MEM_NAME,
+	},
+};
+
+static void __exit vim2m_exit(void)
+{
+	platform_driver_unregister(&vim2m_pdrv);
+	platform_device_unregister(&vim2m_pdev);
+}
+
+static int __init vim2m_init(void)
+{
+	int ret;
+
+	ret = platform_device_register(&vim2m_pdev);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&vim2m_pdrv);
+	if (ret)
+		platform_device_unregister(&vim2m_pdev);
+
+	return ret;
+}
+
+module_init(vim2m_init);
+module_exit(vim2m_exit);
diff --git a/drivers/media/test-drivers/vimc/Kconfig b/drivers/media/test-drivers/vimc/Kconfig
new file mode 100644
index 000000000000..4068a67585f9
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_VIMC
+	tristate "Virtual Media Controller Driver (VIMC)"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select VIDEOBUF2_VMALLOC
+	select VIDEO_V4L2_TPG
+	help
+	  Skeleton driver for Virtual Media Controller
+
+	  This driver can be compared to the vivid driver for emulating
+	  a media node that exposes a complex media topology. The topology
+	  is hard coded for now but is meant to be highly configurable in
+	  the future.
+
+	  When in doubt, say N.
diff --git a/drivers/media/test-drivers/vimc/Makefile b/drivers/media/test-drivers/vimc/Makefile
new file mode 100644
index 000000000000..a53b2b532e9f
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+vimc-y := vimc-core.o vimc-common.o vimc-streamer.o vimc-capture.o \
+		vimc-debayer.o vimc-scaler.o vimc-sensor.o
+
+obj-$(CONFIG_VIDEO_VIMC) += vimc.o
+
diff --git a/drivers/media/test-drivers/vimc/vimc-capture.c b/drivers/media/test-drivers/vimc/vimc-capture.c
new file mode 100644
index 000000000000..20c2f5e281bc
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/vimc-capture.c
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * vimc-capture.c Virtual Media Controller Driver
+ *
+ * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
+ */
+
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-vmalloc.h>
+
+#include "vimc-common.h"
+#include "vimc-streamer.h"
+
+struct vimc_cap_device {
+	struct vimc_ent_device ved;
+	struct video_device vdev;
+	struct v4l2_pix_format format;
+	struct vb2_queue queue;
+	struct list_head buf_list;
+	/*
+	 * NOTE: in a real driver, a spin lock must be used to access the
+	 * queue because the frames are generated from a hardware interruption
+	 * and the isr is not allowed to sleep.
+	 * Even if it is not necessary a spinlock in the vimc driver, we
+	 * use it here as a code reference
+	 */
+	spinlock_t qlock;
+	struct mutex lock;
+	u32 sequence;
+	struct vimc_stream stream;
+	struct media_pad pad;
+};
+
+static const struct v4l2_pix_format fmt_default = {
+	.width = 640,
+	.height = 480,
+	.pixelformat = V4L2_PIX_FMT_RGB24,
+	.field = V4L2_FIELD_NONE,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+};
+
+struct vimc_cap_buffer {
+	/*
+	 * struct vb2_v4l2_buffer must be the first element
+	 * the videobuf2 framework will allocate this struct based on
+	 * buf_struct_size and use the first sizeof(struct vb2_buffer) bytes of
+	 * memory as a vb2_buffer
+	 */
+	struct vb2_v4l2_buffer vb2;
+	struct list_head list;
+};
+
+static int vimc_cap_querycap(struct file *file, void *priv,
+			     struct v4l2_capability *cap)
+{
+	strscpy(cap->driver, VIMC_PDEV_NAME, sizeof(cap->driver));
+	strscpy(cap->card, KBUILD_MODNAME, sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info),
+		 "platform:%s", VIMC_PDEV_NAME);
+
+	return 0;
+}
+
+static void vimc_cap_get_format(struct vimc_ent_device *ved,
+				struct v4l2_pix_format *fmt)
+{
+	struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device,
+						    ved);
+
+	*fmt = vcap->format;
+}
+
+static int vimc_cap_g_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vimc_cap_device *vcap = video_drvdata(file);
+
+	f->fmt.pix = vcap->format;
+
+	return 0;
+}
+
+static int vimc_cap_try_fmt_vid_cap(struct file *file, void *priv,
+				    struct v4l2_format *f)
+{
+	struct v4l2_pix_format *format = &f->fmt.pix;
+	const struct vimc_pix_map *vpix;
+
+	format->width = clamp_t(u32, format->width, VIMC_FRAME_MIN_WIDTH,
+				VIMC_FRAME_MAX_WIDTH) & ~1;
+	format->height = clamp_t(u32, format->height, VIMC_FRAME_MIN_HEIGHT,
+				 VIMC_FRAME_MAX_HEIGHT) & ~1;
+
+	/* Don't accept a pixelformat that is not on the table */
+	vpix = vimc_pix_map_by_pixelformat(format->pixelformat);
+	if (!vpix) {
+		format->pixelformat = fmt_default.pixelformat;
+		vpix = vimc_pix_map_by_pixelformat(format->pixelformat);
+	}
+	/* TODO: Add support for custom bytesperline values */
+	format->bytesperline = format->width * vpix->bpp;
+	format->sizeimage = format->bytesperline * format->height;
+
+	if (format->field == V4L2_FIELD_ANY)
+		format->field = fmt_default.field;
+
+	vimc_colorimetry_clamp(format);
+
+	if (format->colorspace == V4L2_COLORSPACE_DEFAULT)
+		format->colorspace = fmt_default.colorspace;
+
+	return 0;
+}
+
+static int vimc_cap_s_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vimc_cap_device *vcap = video_drvdata(file);
+	int ret;
+
+	/* Do not change the format while stream is on */
+	if (vb2_is_busy(&vcap->queue))
+		return -EBUSY;
+
+	ret = vimc_cap_try_fmt_vid_cap(file, priv, f);
+	if (ret)
+		return ret;
+
+	dev_dbg(vcap->ved.dev, "%s: format update: "
+		"old:%dx%d (0x%x, %d, %d, %d, %d) "
+		"new:%dx%d (0x%x, %d, %d, %d, %d)\n", vcap->vdev.name,
+		/* old */
+		vcap->format.width, vcap->format.height,
+		vcap->format.pixelformat, vcap->format.colorspace,
+		vcap->format.quantization, vcap->format.xfer_func,
+		vcap->format.ycbcr_enc,
+		/* new */
+		f->fmt.pix.width, f->fmt.pix.height,
+		f->fmt.pix.pixelformat,	f->fmt.pix.colorspace,
+		f->fmt.pix.quantization, f->fmt.pix.xfer_func,
+		f->fmt.pix.ycbcr_enc);
+
+	vcap->format = f->fmt.pix;
+
+	return 0;
+}
+
+static int vimc_cap_enum_fmt_vid_cap(struct file *file, void *priv,
+				     struct v4l2_fmtdesc *f)
+{
+	const struct vimc_pix_map *vpix = vimc_pix_map_by_index(f->index);
+
+	if (!vpix)
+		return -EINVAL;
+
+	f->pixelformat = vpix->pixelformat;
+
+	return 0;
+}
+
+static int vimc_cap_enum_framesizes(struct file *file, void *fh,
+				    struct v4l2_frmsizeenum *fsize)
+{
+	const struct vimc_pix_map *vpix;
+
+	if (fsize->index)
+		return -EINVAL;
+
+	/* Only accept code in the pix map table */
+	vpix = vimc_pix_map_by_code(fsize->pixel_format);
+	if (!vpix)
+		return -EINVAL;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_CONTINUOUS;
+	fsize->stepwise.min_width = VIMC_FRAME_MIN_WIDTH;
+	fsize->stepwise.max_width = VIMC_FRAME_MAX_WIDTH;
+	fsize->stepwise.min_height = VIMC_FRAME_MIN_HEIGHT;
+	fsize->stepwise.max_height = VIMC_FRAME_MAX_HEIGHT;
+	fsize->stepwise.step_width = 1;
+	fsize->stepwise.step_height = 1;
+
+	return 0;
+}
+
+static const struct v4l2_file_operations vimc_cap_fops = {
+	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= vb2_fop_release,
+	.read           = vb2_fop_read,
+	.poll		= vb2_fop_poll,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap           = vb2_fop_mmap,
+};
+
+static const struct v4l2_ioctl_ops vimc_cap_ioctl_ops = {
+	.vidioc_querycap = vimc_cap_querycap,
+
+	.vidioc_g_fmt_vid_cap = vimc_cap_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap = vimc_cap_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap = vimc_cap_try_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap = vimc_cap_enum_fmt_vid_cap,
+	.vidioc_enum_framesizes = vimc_cap_enum_framesizes,
+
+	.vidioc_reqbufs = vb2_ioctl_reqbufs,
+	.vidioc_create_bufs = vb2_ioctl_create_bufs,
+	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+	.vidioc_querybuf = vb2_ioctl_querybuf,
+	.vidioc_qbuf = vb2_ioctl_qbuf,
+	.vidioc_dqbuf = vb2_ioctl_dqbuf,
+	.vidioc_expbuf = vb2_ioctl_expbuf,
+	.vidioc_streamon = vb2_ioctl_streamon,
+	.vidioc_streamoff = vb2_ioctl_streamoff,
+};
+
+static void vimc_cap_return_all_buffers(struct vimc_cap_device *vcap,
+					enum vb2_buffer_state state)
+{
+	struct vimc_cap_buffer *vbuf, *node;
+
+	spin_lock(&vcap->qlock);
+
+	list_for_each_entry_safe(vbuf, node, &vcap->buf_list, list) {
+		list_del(&vbuf->list);
+		vb2_buffer_done(&vbuf->vb2.vb2_buf, state);
+	}
+
+	spin_unlock(&vcap->qlock);
+}
+
+static int vimc_cap_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct vimc_cap_device *vcap = vb2_get_drv_priv(vq);
+	struct media_entity *entity = &vcap->vdev.entity;
+	int ret;
+
+	vcap->sequence = 0;
+
+	/* Start the media pipeline */
+	ret = media_pipeline_start(entity, &vcap->stream.pipe);
+	if (ret) {
+		vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED);
+		return ret;
+	}
+
+	ret = vimc_streamer_s_stream(&vcap->stream, &vcap->ved, 1);
+	if (ret) {
+		media_pipeline_stop(entity);
+		vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Stop the stream engine. Any remaining buffers in the stream queue are
+ * dequeued and passed on to the vb2 framework marked as STATE_ERROR.
+ */
+static void vimc_cap_stop_streaming(struct vb2_queue *vq)
+{
+	struct vimc_cap_device *vcap = vb2_get_drv_priv(vq);
+
+	vimc_streamer_s_stream(&vcap->stream, &vcap->ved, 0);
+
+	/* Stop the media pipeline */
+	media_pipeline_stop(&vcap->vdev.entity);
+
+	/* Release all active buffers */
+	vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_ERROR);
+}
+
+static void vimc_cap_buf_queue(struct vb2_buffer *vb2_buf)
+{
+	struct vimc_cap_device *vcap = vb2_get_drv_priv(vb2_buf->vb2_queue);
+	struct vimc_cap_buffer *buf = container_of(vb2_buf,
+						   struct vimc_cap_buffer,
+						   vb2.vb2_buf);
+
+	spin_lock(&vcap->qlock);
+	list_add_tail(&buf->list, &vcap->buf_list);
+	spin_unlock(&vcap->qlock);
+}
+
+static int vimc_cap_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+				unsigned int *nplanes, unsigned int sizes[],
+				struct device *alloc_devs[])
+{
+	struct vimc_cap_device *vcap = vb2_get_drv_priv(vq);
+
+	if (*nplanes)
+		return sizes[0] < vcap->format.sizeimage ? -EINVAL : 0;
+	/* We don't support multiplanes for now */
+	*nplanes = 1;
+	sizes[0] = vcap->format.sizeimage;
+
+	return 0;
+}
+
+static int vimc_cap_buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vimc_cap_device *vcap = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned long size = vcap->format.sizeimage;
+
+	if (vb2_plane_size(vb, 0) < size) {
+		dev_err(vcap->ved.dev, "%s: buffer too small (%lu < %lu)\n",
+			vcap->vdev.name, vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct vb2_ops vimc_cap_qops = {
+	.start_streaming	= vimc_cap_start_streaming,
+	.stop_streaming		= vimc_cap_stop_streaming,
+	.buf_queue		= vimc_cap_buf_queue,
+	.queue_setup		= vimc_cap_queue_setup,
+	.buf_prepare		= vimc_cap_buffer_prepare,
+	/*
+	 * Since q->lock is set we can use the standard
+	 * vb2_ops_wait_prepare/finish helper functions.
+	 */
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+static const struct media_entity_operations vimc_cap_mops = {
+	.link_validate		= vimc_vdev_link_validate,
+};
+
+static void vimc_cap_release(struct vimc_ent_device *ved)
+{
+	struct vimc_cap_device *vcap =
+		container_of(ved, struct vimc_cap_device, ved);
+
+	media_entity_cleanup(vcap->ved.ent);
+	kfree(vcap);
+}
+
+static void vimc_cap_unregister(struct vimc_ent_device *ved)
+{
+	struct vimc_cap_device *vcap =
+		container_of(ved, struct vimc_cap_device, ved);
+
+	vb2_queue_release(&vcap->queue);
+	video_unregister_device(&vcap->vdev);
+}
+
+static void *vimc_cap_process_frame(struct vimc_ent_device *ved,
+				    const void *frame)
+{
+	struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device,
+						    ved);
+	struct vimc_cap_buffer *vimc_buf;
+	void *vbuf;
+
+	spin_lock(&vcap->qlock);
+
+	/* Get the first entry of the list */
+	vimc_buf = list_first_entry_or_null(&vcap->buf_list,
+					    typeof(*vimc_buf), list);
+	if (!vimc_buf) {
+		spin_unlock(&vcap->qlock);
+		return ERR_PTR(-EAGAIN);
+	}
+
+	/* Remove this entry from the list */
+	list_del(&vimc_buf->list);
+
+	spin_unlock(&vcap->qlock);
+
+	/* Fill the buffer */
+	vimc_buf->vb2.vb2_buf.timestamp = ktime_get_ns();
+	vimc_buf->vb2.sequence = vcap->sequence++;
+	vimc_buf->vb2.field = vcap->format.field;
+
+	vbuf = vb2_plane_vaddr(&vimc_buf->vb2.vb2_buf, 0);
+
+	memcpy(vbuf, frame, vcap->format.sizeimage);
+
+	/* Set it as ready */
+	vb2_set_plane_payload(&vimc_buf->vb2.vb2_buf, 0,
+			      vcap->format.sizeimage);
+	vb2_buffer_done(&vimc_buf->vb2.vb2_buf, VB2_BUF_STATE_DONE);
+	return NULL;
+}
+
+static struct vimc_ent_device *vimc_cap_add(struct vimc_device *vimc,
+					    const char *vcfg_name)
+{
+	struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
+	const struct vimc_pix_map *vpix;
+	struct vimc_cap_device *vcap;
+	struct video_device *vdev;
+	struct vb2_queue *q;
+	int ret;
+
+	/* Allocate the vimc_cap_device struct */
+	vcap = kzalloc(sizeof(*vcap), GFP_KERNEL);
+	if (!vcap)
+		return ERR_PTR(-ENOMEM);
+
+	/* Initialize the media entity */
+	vcap->vdev.entity.name = vcfg_name;
+	vcap->vdev.entity.function = MEDIA_ENT_F_IO_V4L;
+	vcap->pad.flags = MEDIA_PAD_FL_SINK;
+	ret = media_entity_pads_init(&vcap->vdev.entity,
+				     1, &vcap->pad);
+	if (ret)
+		goto err_free_vcap;
+
+	/* Initialize the lock */
+	mutex_init(&vcap->lock);
+
+	/* Initialize the vb2 queue */
+	q = &vcap->queue;
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_USERPTR;
+	q->drv_priv = vcap;
+	q->buf_struct_size = sizeof(struct vimc_cap_buffer);
+	q->ops = &vimc_cap_qops;
+	q->mem_ops = &vb2_vmalloc_memops;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->min_buffers_needed = 2;
+	q->lock = &vcap->lock;
+
+	ret = vb2_queue_init(q);
+	if (ret) {
+		dev_err(vimc->mdev.dev, "%s: vb2 queue init failed (err=%d)\n",
+			vcfg_name, ret);
+		goto err_clean_m_ent;
+	}
+
+	/* Initialize buffer list and its lock */
+	INIT_LIST_HEAD(&vcap->buf_list);
+	spin_lock_init(&vcap->qlock);
+
+	/* Set default frame format */
+	vcap->format = fmt_default;
+	vpix = vimc_pix_map_by_pixelformat(vcap->format.pixelformat);
+	vcap->format.bytesperline = vcap->format.width * vpix->bpp;
+	vcap->format.sizeimage = vcap->format.bytesperline *
+				 vcap->format.height;
+
+	/* Fill the vimc_ent_device struct */
+	vcap->ved.ent = &vcap->vdev.entity;
+	vcap->ved.process_frame = vimc_cap_process_frame;
+	vcap->ved.vdev_get_format = vimc_cap_get_format;
+	vcap->ved.dev = vimc->mdev.dev;
+
+	/* Initialize the video_device struct */
+	vdev = &vcap->vdev;
+	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+	vdev->entity.ops = &vimc_cap_mops;
+	vdev->release = video_device_release_empty;
+	vdev->fops = &vimc_cap_fops;
+	vdev->ioctl_ops = &vimc_cap_ioctl_ops;
+	vdev->lock = &vcap->lock;
+	vdev->queue = q;
+	vdev->v4l2_dev = v4l2_dev;
+	vdev->vfl_dir = VFL_DIR_RX;
+	strscpy(vdev->name, vcfg_name, sizeof(vdev->name));
+	video_set_drvdata(vdev, &vcap->ved);
+
+	/* Register the video_device with the v4l2 and the media framework */
+	ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
+	if (ret) {
+		dev_err(vimc->mdev.dev, "%s: video register failed (err=%d)\n",
+			vcap->vdev.name, ret);
+		goto err_release_queue;
+	}
+
+	return &vcap->ved;
+
+err_release_queue:
+	vb2_queue_release(q);
+err_clean_m_ent:
+	media_entity_cleanup(&vcap->vdev.entity);
+err_free_vcap:
+	kfree(vcap);
+
+	return ERR_PTR(ret);
+}
+
+struct vimc_ent_type vimc_cap_type = {
+	.add = vimc_cap_add,
+	.unregister = vimc_cap_unregister,
+	.release = vimc_cap_release
+};
diff --git a/drivers/media/test-drivers/vimc/vimc-common.c b/drivers/media/test-drivers/vimc/vimc-common.c
new file mode 100644
index 000000000000..c95c17c048f2
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/vimc-common.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * vimc-common.c Virtual Media Controller Driver
+ *
+ * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include "vimc-common.h"
+
+/*
+ * NOTE: non-bayer formats need to come first (necessary for enum_mbus_code
+ * in the scaler)
+ */
+static const struct vimc_pix_map vimc_pix_map_list[] = {
+	/* TODO: add all missing formats */
+
+	/* RGB formats */
+	{
+		.code = MEDIA_BUS_FMT_BGR888_1X24,
+		.pixelformat = V4L2_PIX_FMT_BGR24,
+		.bpp = 3,
+		.bayer = false,
+	},
+	{
+		.code = MEDIA_BUS_FMT_RGB888_1X24,
+		.pixelformat = V4L2_PIX_FMT_RGB24,
+		.bpp = 3,
+		.bayer = false,
+	},
+	{
+		.code = MEDIA_BUS_FMT_ARGB8888_1X32,
+		.pixelformat = V4L2_PIX_FMT_ARGB32,
+		.bpp = 4,
+		.bayer = false,
+	},
+
+	/* Bayer formats */
+	{
+		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SGBRG8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SGRBG8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SRGGB8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
+		.pixelformat = V4L2_PIX_FMT_SBGGR10,
+		.bpp = 2,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
+		.pixelformat = V4L2_PIX_FMT_SGBRG10,
+		.bpp = 2,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
+		.pixelformat = V4L2_PIX_FMT_SGRBG10,
+		.bpp = 2,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.pixelformat = V4L2_PIX_FMT_SRGGB10,
+		.bpp = 2,
+		.bayer = true,
+	},
+
+	/* 10bit raw bayer a-law compressed to 8 bits */
+	{
+		.code = MEDIA_BUS_FMT_SBGGR10_ALAW8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SBGGR10ALAW8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGBRG10_ALAW8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SGBRG10ALAW8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SGRBG10ALAW8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SRGGB10_ALAW8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SRGGB10ALAW8,
+		.bpp = 1,
+		.bayer = true,
+	},
+
+	/* 10bit raw bayer DPCM compressed to 8 bits */
+	{
+		.code = MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SBGGR10DPCM8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SGBRG10DPCM8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8,
+		.pixelformat = V4L2_PIX_FMT_SRGGB10DPCM8,
+		.bpp = 1,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
+		.pixelformat = V4L2_PIX_FMT_SBGGR12,
+		.bpp = 2,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
+		.pixelformat = V4L2_PIX_FMT_SGBRG12,
+		.bpp = 2,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
+		.pixelformat = V4L2_PIX_FMT_SGRBG12,
+		.bpp = 2,
+		.bayer = true,
+	},
+	{
+		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.pixelformat = V4L2_PIX_FMT_SRGGB12,
+		.bpp = 2,
+		.bayer = true,
+	},
+};
+
+bool vimc_is_source(struct media_entity *ent)
+{
+	unsigned int i;
+
+	for (i = 0; i < ent->num_pads; i++)
+		if (ent->pads[i].flags & MEDIA_PAD_FL_SINK)
+			return false;
+	return true;
+}
+
+const struct vimc_pix_map *vimc_pix_map_by_index(unsigned int i)
+{
+	if (i >= ARRAY_SIZE(vimc_pix_map_list))
+		return NULL;
+
+	return &vimc_pix_map_list[i];
+}
+
+const struct vimc_pix_map *vimc_pix_map_by_code(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vimc_pix_map_list); i++) {
+		if (vimc_pix_map_list[i].code == code)
+			return &vimc_pix_map_list[i];
+	}
+	return NULL;
+}
+
+const struct vimc_pix_map *vimc_pix_map_by_pixelformat(u32 pixelformat)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vimc_pix_map_list); i++) {
+		if (vimc_pix_map_list[i].pixelformat == pixelformat)
+			return &vimc_pix_map_list[i];
+	}
+	return NULL;
+}
+
+static int vimc_get_pix_format(struct media_pad *pad,
+			       struct v4l2_pix_format *fmt)
+{
+	if (is_media_entity_v4l2_subdev(pad->entity)) {
+		struct v4l2_subdev *sd =
+			media_entity_to_v4l2_subdev(pad->entity);
+		struct v4l2_subdev_format sd_fmt;
+		const struct vimc_pix_map *pix_map;
+		int ret;
+
+		sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+		sd_fmt.pad = pad->index;
+
+		ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &sd_fmt);
+		if (ret)
+			return ret;
+
+		v4l2_fill_pix_format(fmt, &sd_fmt.format);
+		pix_map = vimc_pix_map_by_code(sd_fmt.format.code);
+		fmt->pixelformat = pix_map->pixelformat;
+	} else if (is_media_entity_v4l2_video_device(pad->entity)) {
+		struct video_device *vdev = container_of(pad->entity,
+							 struct video_device,
+							 entity);
+		struct vimc_ent_device *ved = video_get_drvdata(vdev);
+
+		if (!ved->vdev_get_format)
+			return -ENOIOCTLCMD;
+
+		ved->vdev_get_format(ved, fmt);
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int vimc_vdev_link_validate(struct media_link *link)
+{
+	struct v4l2_pix_format source_fmt, sink_fmt;
+	int ret;
+
+	ret = vimc_get_pix_format(link->source, &source_fmt);
+	if (ret)
+		return ret;
+
+	ret = vimc_get_pix_format(link->sink, &sink_fmt);
+	if (ret)
+		return ret;
+
+	pr_info("vimc link validate: "
+		"%s:src:%dx%d (0x%x, %d, %d, %d, %d) "
+		"%s:snk:%dx%d (0x%x, %d, %d, %d, %d)\n",
+		/* src */
+		link->source->entity->name,
+		source_fmt.width, source_fmt.height,
+		source_fmt.pixelformat, source_fmt.colorspace,
+		source_fmt.quantization, source_fmt.xfer_func,
+		source_fmt.ycbcr_enc,
+		/* sink */
+		link->sink->entity->name,
+		sink_fmt.width, sink_fmt.height,
+		sink_fmt.pixelformat, sink_fmt.colorspace,
+		sink_fmt.quantization, sink_fmt.xfer_func,
+		sink_fmt.ycbcr_enc);
+
+	/* The width, height and pixelformat must match. */
+	if (source_fmt.width != sink_fmt.width ||
+	    source_fmt.height != sink_fmt.height ||
+	    source_fmt.pixelformat != sink_fmt.pixelformat)
+		return -EPIPE;
+
+	/*
+	 * The field order must match, or the sink field order must be NONE
+	 * to support interlaced hardware connected to bridges that support
+	 * progressive formats only.
+	 */
+	if (source_fmt.field != sink_fmt.field &&
+	    sink_fmt.field != V4L2_FIELD_NONE)
+		return -EPIPE;
+
+	/*
+	 * If colorspace is DEFAULT, then assume all the colorimetry is also
+	 * DEFAULT, return 0 to skip comparing the other colorimetry parameters
+	 */
+	if (source_fmt.colorspace == V4L2_COLORSPACE_DEFAULT ||
+	    sink_fmt.colorspace == V4L2_COLORSPACE_DEFAULT)
+		return 0;
+
+	/* Colorspace must match. */
+	if (source_fmt.colorspace != sink_fmt.colorspace)
+		return -EPIPE;
+
+	/* Colorimetry must match if they are not set to DEFAULT */
+	if (source_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT &&
+	    sink_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT &&
+	    source_fmt.ycbcr_enc != sink_fmt.ycbcr_enc)
+		return -EPIPE;
+
+	if (source_fmt.quantization != V4L2_QUANTIZATION_DEFAULT &&
+	    sink_fmt.quantization != V4L2_QUANTIZATION_DEFAULT &&
+	    source_fmt.quantization != sink_fmt.quantization)
+		return -EPIPE;
+
+	if (source_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT &&
+	    sink_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT &&
+	    source_fmt.xfer_func != sink_fmt.xfer_func)
+		return -EPIPE;
+
+	return 0;
+}
+
+static const struct media_entity_operations vimc_ent_sd_mops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+int vimc_ent_sd_register(struct vimc_ent_device *ved,
+			 struct v4l2_subdev *sd,
+			 struct v4l2_device *v4l2_dev,
+			 const char *const name,
+			 u32 function,
+			 u16 num_pads,
+			 struct media_pad *pads,
+			 const struct v4l2_subdev_ops *sd_ops)
+{
+	int ret;
+
+	/* Fill the vimc_ent_device struct */
+	ved->ent = &sd->entity;
+
+	/* Initialize the subdev */
+	v4l2_subdev_init(sd, sd_ops);
+	sd->entity.function = function;
+	sd->entity.ops = &vimc_ent_sd_mops;
+	sd->owner = THIS_MODULE;
+	strscpy(sd->name, name, sizeof(sd->name));
+	v4l2_set_subdevdata(sd, ved);
+
+	/* Expose this subdev to user space */
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	if (sd->ctrl_handler)
+		sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS;
+
+	/* Initialize the media entity */
+	ret = media_entity_pads_init(&sd->entity, num_pads, pads);
+	if (ret)
+		return ret;
+
+	/* Register the subdev with the v4l2 and the media framework */
+	ret = v4l2_device_register_subdev(v4l2_dev, sd);
+	if (ret) {
+		dev_err(v4l2_dev->dev,
+			"%s: subdev register failed (err=%d)\n",
+			name, ret);
+		goto err_clean_m_ent;
+	}
+
+	return 0;
+
+err_clean_m_ent:
+	media_entity_cleanup(&sd->entity);
+	return ret;
+}
diff --git a/drivers/media/test-drivers/vimc/vimc-common.h b/drivers/media/test-drivers/vimc/vimc-common.h
new file mode 100644
index 000000000000..487bd020f85c
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/vimc-common.h
@@ -0,0 +1,221 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * vimc-common.h Virtual Media Controller Driver
+ *
+ * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
+ */
+
+#ifndef _VIMC_COMMON_H_
+#define _VIMC_COMMON_H_
+
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <media/media-device.h>
+#include <media/v4l2-device.h>
+
+#define VIMC_PDEV_NAME "vimc"
+
+/* VIMC-specific controls */
+#define VIMC_CID_VIMC_BASE		(0x00f00000 | 0xf000)
+#define VIMC_CID_VIMC_CLASS		(0x00f00000 | 1)
+#define VIMC_CID_TEST_PATTERN		(VIMC_CID_VIMC_BASE + 0)
+#define VIMC_CID_MEAN_WIN_SIZE		(VIMC_CID_VIMC_BASE + 1)
+
+#define VIMC_FRAME_MAX_WIDTH 4096
+#define VIMC_FRAME_MAX_HEIGHT 2160
+#define VIMC_FRAME_MIN_WIDTH 16
+#define VIMC_FRAME_MIN_HEIGHT 16
+
+#define VIMC_FRAME_INDEX(lin, col, width, bpp) ((lin * width + col) * bpp)
+
+/* Source and sink pad checks */
+#define VIMC_IS_SRC(pad)	(pad)
+#define VIMC_IS_SINK(pad)	(!(pad))
+
+/**
+ * vimc_colorimetry_clamp - Adjust colorimetry parameters
+ *
+ * @fmt:		the pointer to struct v4l2_pix_format or
+ *			struct v4l2_mbus_framefmt
+ *
+ * Entities must check if colorimetry given by the userspace is valid, if not
+ * then set them as DEFAULT
+ */
+#define vimc_colorimetry_clamp(fmt)					\
+do {									\
+	if ((fmt)->colorspace == V4L2_COLORSPACE_DEFAULT		\
+	    || (fmt)->colorspace > V4L2_COLORSPACE_DCI_P3) {		\
+		(fmt)->colorspace = V4L2_COLORSPACE_DEFAULT;		\
+		(fmt)->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;		\
+		(fmt)->quantization = V4L2_QUANTIZATION_DEFAULT;	\
+		(fmt)->xfer_func = V4L2_XFER_FUNC_DEFAULT;		\
+	}								\
+	if ((fmt)->ycbcr_enc > V4L2_YCBCR_ENC_SMPTE240M)		\
+		(fmt)->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;		\
+	if ((fmt)->quantization > V4L2_QUANTIZATION_LIM_RANGE)		\
+		(fmt)->quantization = V4L2_QUANTIZATION_DEFAULT;	\
+	if ((fmt)->xfer_func > V4L2_XFER_FUNC_SMPTE2084)		\
+		(fmt)->xfer_func = V4L2_XFER_FUNC_DEFAULT;		\
+} while (0)
+
+/**
+ * struct vimc_pix_map - maps media bus code with v4l2 pixel format
+ *
+ * @code:		media bus format code defined by MEDIA_BUS_FMT_* macros
+ * @bpp:		number of bytes each pixel occupies
+ * @pixelformat:	pixel format defined by V4L2_PIX_FMT_* macros
+ * @bayer:		true if this is a bayer format
+ *
+ * Struct which matches the MEDIA_BUS_FMT_* codes with the corresponding
+ * V4L2_PIX_FMT_* fourcc pixelformat and its bytes per pixel (bpp)
+ */
+struct vimc_pix_map {
+	unsigned int code;
+	unsigned int bpp;
+	u32 pixelformat;
+	bool bayer;
+};
+
+/**
+ * struct vimc_ent_device - core struct that represents an entity in the
+ * topology
+ *
+ * @dev:		a pointer of the device struct of the driver
+ * @ent:		the pointer to struct media_entity for the node
+ * @process_frame:	callback send a frame to that node
+ * @vdev_get_format:	callback that returns the current format a pad, used
+ *			only when is_media_entity_v4l2_video_device(ent) returns
+ *			true
+ *
+ * Each node of the topology must create a vimc_ent_device struct. Depending on
+ * the node it will be of an instance of v4l2_subdev or video_device struct
+ * where both contains a struct media_entity.
+ * Those structures should embedded the vimc_ent_device struct through
+ * v4l2_set_subdevdata() and video_set_drvdata() respectively, allowing the
+ * vimc_ent_device struct to be retrieved from the corresponding struct
+ * media_entity
+ */
+struct vimc_ent_device {
+	struct device *dev;
+	struct media_entity *ent;
+	void * (*process_frame)(struct vimc_ent_device *ved,
+				const void *frame);
+	void (*vdev_get_format)(struct vimc_ent_device *ved,
+			      struct v4l2_pix_format *fmt);
+};
+
+/**
+ * struct vimc_device - main device for vimc driver
+ *
+ * @pipe_cfg:	pointer to the vimc pipeline configuration structure
+ * @ent_devs:	array of vimc_ent_device pointers
+ * @mdev:	the associated media_device parent
+ * @v4l2_dev:	Internal v4l2 parent device
+ */
+struct vimc_device {
+	const struct vimc_pipeline_config *pipe_cfg;
+	struct vimc_ent_device **ent_devs;
+	struct media_device mdev;
+	struct v4l2_device v4l2_dev;
+};
+
+/**
+ * struct vimc_ent_type		Structure for the callbacks of the entity types
+ *
+ *
+ * @add:			initializes and registers
+ *				vimc entity - called from vimc-core
+ * @unregister:			unregisters vimc entity - called from vimc-core
+ * @release:			releases vimc entity - called from the v4l2_dev
+ *				release callback
+ */
+struct vimc_ent_type {
+	struct vimc_ent_device *(*add)(struct vimc_device *vimc,
+				       const char *vcfg_name);
+	void (*unregister)(struct vimc_ent_device *ved);
+	void (*release)(struct vimc_ent_device *ved);
+};
+
+/**
+ * struct vimc_ent_config	Structure which describes individual
+ *				configuration for each entity
+ *
+ * @name:			entity name
+ * @type:			contain the callbacks of this entity type
+ *
+ */
+struct vimc_ent_config {
+	const char *name;
+	struct vimc_ent_type *type;
+};
+
+/**
+ * vimc_is_source - returns true if the entity has only source pads
+ *
+ * @ent: pointer to &struct media_entity
+ *
+ */
+bool vimc_is_source(struct media_entity *ent);
+
+extern struct vimc_ent_type vimc_sen_type;
+extern struct vimc_ent_type vimc_deb_type;
+extern struct vimc_ent_type vimc_sca_type;
+extern struct vimc_ent_type vimc_cap_type;
+
+/**
+ * vimc_pix_map_by_index - get vimc_pix_map struct by its index
+ *
+ * @i:			index of the vimc_pix_map struct in vimc_pix_map_list
+ */
+const struct vimc_pix_map *vimc_pix_map_by_index(unsigned int i);
+
+/**
+ * vimc_pix_map_by_code - get vimc_pix_map struct by media bus code
+ *
+ * @code:		media bus format code defined by MEDIA_BUS_FMT_* macros
+ */
+const struct vimc_pix_map *vimc_pix_map_by_code(u32 code);
+
+/**
+ * vimc_pix_map_by_pixelformat - get vimc_pix_map struct by v4l2 pixel format
+ *
+ * @pixelformat:	pixel format defined by V4L2_PIX_FMT_* macros
+ */
+const struct vimc_pix_map *vimc_pix_map_by_pixelformat(u32 pixelformat);
+
+/**
+ * vimc_ent_sd_register - initialize and register a subdev node
+ *
+ * @ved:	the vimc_ent_device struct to be initialize
+ * @sd:		the v4l2_subdev struct to be initialize and registered
+ * @v4l2_dev:	the v4l2 device to register the v4l2_subdev
+ * @name:	name of the sub-device. Please notice that the name must be
+ *		unique.
+ * @function:	media entity function defined by MEDIA_ENT_F_* macros
+ * @num_pads:	number of pads to initialize
+ * @pads:	the array of pads of the entity, the caller should set the
+ *		flags of the pads
+ * @sd_ops:	pointer to &struct v4l2_subdev_ops.
+ *
+ * Helper function initialize and register the struct vimc_ent_device and struct
+ * v4l2_subdev which represents a subdev node in the topology
+ */
+int vimc_ent_sd_register(struct vimc_ent_device *ved,
+			 struct v4l2_subdev *sd,
+			 struct v4l2_device *v4l2_dev,
+			 const char *const name,
+			 u32 function,
+			 u16 num_pads,
+			 struct media_pad *pads,
+			 const struct v4l2_subdev_ops *sd_ops);
+
+/**
+ * vimc_vdev_link_validate - validates a media link
+ *
+ * @link: pointer to &struct media_link
+ *
+ * This function calls validates if a media link is valid for streaming.
+ */
+int vimc_vdev_link_validate(struct media_link *link);
+
+#endif
diff --git a/drivers/media/test-drivers/vimc/vimc-core.c b/drivers/media/test-drivers/vimc/vimc-core.c
new file mode 100644
index 000000000000..11210aaa2551
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/vimc-core.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * vimc-core.c Virtual Media Controller Driver
+ *
+ * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <media/media-device.h>
+#include <media/v4l2-device.h>
+
+#include "vimc-common.h"
+
+#define VIMC_MDEV_MODEL_NAME "VIMC MDEV"
+
+#define VIMC_ENT_LINK(src, srcpad, sink, sinkpad, link_flags) {	\
+	.src_ent = src,						\
+	.src_pad = srcpad,					\
+	.sink_ent = sink,					\
+	.sink_pad = sinkpad,					\
+	.flags = link_flags,					\
+}
+
+/* Structure which describes links between entities */
+struct vimc_ent_link {
+	unsigned int src_ent;
+	u16 src_pad;
+	unsigned int sink_ent;
+	u16 sink_pad;
+	u32 flags;
+};
+
+/* Structure which describes the whole topology */
+struct vimc_pipeline_config {
+	const struct vimc_ent_config *ents;
+	size_t num_ents;
+	const struct vimc_ent_link *links;
+	size_t num_links;
+};
+
+/* --------------------------------------------------------------------------
+ * Topology Configuration
+ */
+
+static struct vimc_ent_config ent_config[] = {
+	{
+		.name = "Sensor A",
+		.type = &vimc_sen_type
+	},
+	{
+		.name = "Sensor B",
+		.type = &vimc_sen_type
+	},
+	{
+		.name = "Debayer A",
+		.type = &vimc_deb_type
+	},
+	{
+		.name = "Debayer B",
+		.type = &vimc_deb_type
+	},
+	{
+		.name = "Raw Capture 0",
+		.type = &vimc_cap_type
+	},
+	{
+		.name = "Raw Capture 1",
+		.type = &vimc_cap_type
+	},
+	{
+		/* TODO: change this to vimc-input when it is implemented */
+		.name = "RGB/YUV Input",
+		.type = &vimc_sen_type
+	},
+	{
+		.name = "Scaler",
+		.type = &vimc_sca_type
+	},
+	{
+		.name = "RGB/YUV Capture",
+		.type = &vimc_cap_type
+	},
+};
+
+static const struct vimc_ent_link ent_links[] = {
+	/* Link: Sensor A (Pad 0)->(Pad 0) Debayer A */
+	VIMC_ENT_LINK(0, 0, 2, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
+	/* Link: Sensor A (Pad 0)->(Pad 0) Raw Capture 0 */
+	VIMC_ENT_LINK(0, 0, 4, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
+	/* Link: Sensor B (Pad 0)->(Pad 0) Debayer B */
+	VIMC_ENT_LINK(1, 0, 3, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
+	/* Link: Sensor B (Pad 0)->(Pad 0) Raw Capture 1 */
+	VIMC_ENT_LINK(1, 0, 5, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
+	/* Link: Debayer A (Pad 1)->(Pad 0) Scaler */
+	VIMC_ENT_LINK(2, 1, 7, 0, MEDIA_LNK_FL_ENABLED),
+	/* Link: Debayer B (Pad 1)->(Pad 0) Scaler */
+	VIMC_ENT_LINK(3, 1, 7, 0, 0),
+	/* Link: RGB/YUV Input (Pad 0)->(Pad 0) Scaler */
+	VIMC_ENT_LINK(6, 0, 7, 0, 0),
+	/* Link: Scaler (Pad 1)->(Pad 0) RGB/YUV Capture */
+	VIMC_ENT_LINK(7, 1, 8, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
+};
+
+static struct vimc_pipeline_config pipe_cfg = {
+	.ents		= ent_config,
+	.num_ents	= ARRAY_SIZE(ent_config),
+	.links		= ent_links,
+	.num_links	= ARRAY_SIZE(ent_links)
+};
+
+/* -------------------------------------------------------------------------- */
+
+static void vimc_rm_links(struct vimc_device *vimc)
+{
+	unsigned int i;
+
+	for (i = 0; i < vimc->pipe_cfg->num_ents; i++)
+		media_entity_remove_links(vimc->ent_devs[i]->ent);
+}
+
+static int vimc_create_links(struct vimc_device *vimc)
+{
+	unsigned int i;
+	int ret;
+
+	/* Initialize the links between entities */
+	for (i = 0; i < vimc->pipe_cfg->num_links; i++) {
+		const struct vimc_ent_link *link = &vimc->pipe_cfg->links[i];
+
+		struct vimc_ent_device *ved_src =
+			vimc->ent_devs[link->src_ent];
+		struct vimc_ent_device *ved_sink =
+			vimc->ent_devs[link->sink_ent];
+
+		ret = media_create_pad_link(ved_src->ent, link->src_pad,
+					    ved_sink->ent, link->sink_pad,
+					    link->flags);
+		if (ret)
+			goto err_rm_links;
+	}
+
+	return 0;
+
+err_rm_links:
+	vimc_rm_links(vimc);
+	return ret;
+}
+
+static void vimc_release_subdevs(struct vimc_device *vimc)
+{
+	unsigned int i;
+
+	for (i = 0; i < vimc->pipe_cfg->num_ents; i++)
+		if (vimc->ent_devs[i])
+			vimc->pipe_cfg->ents[i].type->release(vimc->ent_devs[i]);
+}
+
+static void vimc_unregister_subdevs(struct vimc_device *vimc)
+{
+	unsigned int i;
+
+	for (i = 0; i < vimc->pipe_cfg->num_ents; i++)
+		if (vimc->ent_devs[i] && vimc->pipe_cfg->ents[i].type->unregister)
+			vimc->pipe_cfg->ents[i].type->unregister(vimc->ent_devs[i]);
+}
+
+static int vimc_add_subdevs(struct vimc_device *vimc)
+{
+	unsigned int i;
+
+	for (i = 0; i < vimc->pipe_cfg->num_ents; i++) {
+		dev_dbg(vimc->mdev.dev, "new entity for %s\n",
+			vimc->pipe_cfg->ents[i].name);
+		vimc->ent_devs[i] = vimc->pipe_cfg->ents[i].type->add(vimc,
+					vimc->pipe_cfg->ents[i].name);
+		if (IS_ERR(vimc->ent_devs[i])) {
+			int err = PTR_ERR(vimc->ent_devs[i]);
+
+			dev_err(vimc->mdev.dev, "adding entity %s failed (%d)\n",
+				vimc->pipe_cfg->ents[i].name, err);
+			vimc->ent_devs[i] = NULL;
+			vimc_unregister_subdevs(vimc);
+			vimc_release_subdevs(vimc);
+			return err;
+		}
+	}
+	return 0;
+}
+
+static void vimc_v4l2_dev_release(struct v4l2_device *v4l2_dev)
+{
+	struct vimc_device *vimc =
+		container_of(v4l2_dev, struct vimc_device, v4l2_dev);
+
+	vimc_release_subdevs(vimc);
+	media_device_cleanup(&vimc->mdev);
+	kfree(vimc->ent_devs);
+	kfree(vimc);
+}
+
+static int vimc_register_devices(struct vimc_device *vimc)
+{
+	int ret;
+
+	/* Register the v4l2 struct */
+	ret = v4l2_device_register(vimc->mdev.dev, &vimc->v4l2_dev);
+	if (ret) {
+		dev_err(vimc->mdev.dev,
+			"v4l2 device register failed (err=%d)\n", ret);
+		return ret;
+	}
+	/* allocate ent_devs */
+	vimc->ent_devs = kcalloc(vimc->pipe_cfg->num_ents,
+				 sizeof(*vimc->ent_devs), GFP_KERNEL);
+	if (!vimc->ent_devs) {
+		ret = -ENOMEM;
+		goto err_v4l2_unregister;
+	}
+
+	/* Invoke entity config hooks to initialize and register subdevs */
+	ret = vimc_add_subdevs(vimc);
+	if (ret)
+		goto err_free_ent_devs;
+
+	/* Initialize links */
+	ret = vimc_create_links(vimc);
+	if (ret)
+		goto err_rm_subdevs;
+
+	/* Register the media device */
+	ret = media_device_register(&vimc->mdev);
+	if (ret) {
+		dev_err(vimc->mdev.dev,
+			"media device register failed (err=%d)\n", ret);
+		goto err_rm_subdevs;
+	}
+
+	/* Expose all subdev's nodes*/
+	ret = v4l2_device_register_subdev_nodes(&vimc->v4l2_dev);
+	if (ret) {
+		dev_err(vimc->mdev.dev,
+			"vimc subdev nodes registration failed (err=%d)\n",
+			ret);
+		goto err_mdev_unregister;
+	}
+
+	return 0;
+
+err_mdev_unregister:
+	media_device_unregister(&vimc->mdev);
+err_rm_subdevs:
+	vimc_unregister_subdevs(vimc);
+	vimc_release_subdevs(vimc);
+err_free_ent_devs:
+	kfree(vimc->ent_devs);
+err_v4l2_unregister:
+	v4l2_device_unregister(&vimc->v4l2_dev);
+
+	return ret;
+}
+
+static int vimc_probe(struct platform_device *pdev)
+{
+	struct vimc_device *vimc;
+	int ret;
+
+	dev_dbg(&pdev->dev, "probe");
+
+	vimc = kzalloc(sizeof(*vimc), GFP_KERNEL);
+	if (!vimc)
+		return -ENOMEM;
+
+	vimc->pipe_cfg = &pipe_cfg;
+
+	/* Link the media device within the v4l2_device */
+	vimc->v4l2_dev.mdev = &vimc->mdev;
+
+	/* Initialize media device */
+	strscpy(vimc->mdev.model, VIMC_MDEV_MODEL_NAME,
+		sizeof(vimc->mdev.model));
+	snprintf(vimc->mdev.bus_info, sizeof(vimc->mdev.bus_info),
+		 "platform:%s", VIMC_PDEV_NAME);
+	vimc->mdev.dev = &pdev->dev;
+	media_device_init(&vimc->mdev);
+
+	ret = vimc_register_devices(vimc);
+	if (ret) {
+		media_device_cleanup(&vimc->mdev);
+		kfree(vimc);
+		return ret;
+	}
+	/*
+	 * the release cb is set only after successful registration.
+	 * if the registration fails, we release directly from probe
+	 */
+
+	vimc->v4l2_dev.release = vimc_v4l2_dev_release;
+	platform_set_drvdata(pdev, vimc);
+	return 0;
+}
+
+static int vimc_remove(struct platform_device *pdev)
+{
+	struct vimc_device *vimc = platform_get_drvdata(pdev);
+
+	dev_dbg(&pdev->dev, "remove");
+
+	vimc_unregister_subdevs(vimc);
+	media_device_unregister(&vimc->mdev);
+	v4l2_device_unregister(&vimc->v4l2_dev);
+	v4l2_device_put(&vimc->v4l2_dev);
+
+	return 0;
+}
+
+static void vimc_dev_release(struct device *dev)
+{
+}
+
+static struct platform_device vimc_pdev = {
+	.name = VIMC_PDEV_NAME,
+	.dev.release = vimc_dev_release,
+};
+
+static struct platform_driver vimc_pdrv = {
+	.probe		= vimc_probe,
+	.remove		= vimc_remove,
+	.driver		= {
+		.name	= VIMC_PDEV_NAME,
+	},
+};
+
+static int __init vimc_init(void)
+{
+	int ret;
+
+	ret = platform_device_register(&vimc_pdev);
+	if (ret) {
+		dev_err(&vimc_pdev.dev,
+			"platform device registration failed (err=%d)\n", ret);
+		return ret;
+	}
+
+	ret = platform_driver_register(&vimc_pdrv);
+	if (ret) {
+		dev_err(&vimc_pdev.dev,
+			"platform driver registration failed (err=%d)\n", ret);
+		platform_driver_unregister(&vimc_pdrv);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit vimc_exit(void)
+{
+	platform_driver_unregister(&vimc_pdrv);
+
+	platform_device_unregister(&vimc_pdev);
+}
+
+module_init(vimc_init);
+module_exit(vimc_exit);
+
+MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC)");
+MODULE_AUTHOR("Helen Fornazier <helen.fornazier@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c
new file mode 100644
index 000000000000..c4765ebaeec2
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/vimc-debayer.c
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * vimc-debayer.c Virtual Media Controller Driver
+ *
+ * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/vmalloc.h>
+#include <linux/v4l2-mediabus.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-subdev.h>
+
+#include "vimc-common.h"
+
+enum vimc_deb_rgb_colors {
+	VIMC_DEB_RED = 0,
+	VIMC_DEB_GREEN = 1,
+	VIMC_DEB_BLUE = 2,
+};
+
+struct vimc_deb_pix_map {
+	u32 code;
+	enum vimc_deb_rgb_colors order[2][2];
+};
+
+struct vimc_deb_device {
+	struct vimc_ent_device ved;
+	struct v4l2_subdev sd;
+	/* The active format */
+	struct v4l2_mbus_framefmt sink_fmt;
+	u32 src_code;
+	void (*set_rgb_src)(struct vimc_deb_device *vdeb, unsigned int lin,
+			    unsigned int col, unsigned int rgb[3]);
+	/* Values calculated when the stream starts */
+	u8 *src_frame;
+	const struct vimc_deb_pix_map *sink_pix_map;
+	unsigned int sink_bpp;
+	unsigned int mean_win_size;
+	struct v4l2_ctrl_handler hdl;
+	struct media_pad pads[2];
+};
+
+static const struct v4l2_mbus_framefmt sink_fmt_default = {
+	.width = 640,
+	.height = 480,
+	.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+	.field = V4L2_FIELD_NONE,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+};
+
+static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = {
+	{
+		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
+		.order = { { VIMC_DEB_BLUE, VIMC_DEB_GREEN },
+			   { VIMC_DEB_GREEN, VIMC_DEB_RED } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
+		.order = { { VIMC_DEB_GREEN, VIMC_DEB_BLUE },
+			   { VIMC_DEB_RED, VIMC_DEB_GREEN } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
+		.order = { { VIMC_DEB_GREEN, VIMC_DEB_RED },
+			   { VIMC_DEB_BLUE, VIMC_DEB_GREEN } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+		.order = { { VIMC_DEB_RED, VIMC_DEB_GREEN },
+			   { VIMC_DEB_GREEN, VIMC_DEB_BLUE } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
+		.order = { { VIMC_DEB_BLUE, VIMC_DEB_GREEN },
+			   { VIMC_DEB_GREEN, VIMC_DEB_RED } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
+		.order = { { VIMC_DEB_GREEN, VIMC_DEB_BLUE },
+			   { VIMC_DEB_RED, VIMC_DEB_GREEN } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
+		.order = { { VIMC_DEB_GREEN, VIMC_DEB_RED },
+			   { VIMC_DEB_BLUE, VIMC_DEB_GREEN } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.order = { { VIMC_DEB_RED, VIMC_DEB_GREEN },
+			   { VIMC_DEB_GREEN, VIMC_DEB_BLUE } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
+		.order = { { VIMC_DEB_BLUE, VIMC_DEB_GREEN },
+			   { VIMC_DEB_GREEN, VIMC_DEB_RED } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
+		.order = { { VIMC_DEB_GREEN, VIMC_DEB_BLUE },
+			   { VIMC_DEB_RED, VIMC_DEB_GREEN } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
+		.order = { { VIMC_DEB_GREEN, VIMC_DEB_RED },
+			   { VIMC_DEB_BLUE, VIMC_DEB_GREEN } }
+	},
+	{
+		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.order = { { VIMC_DEB_RED, VIMC_DEB_GREEN },
+			   { VIMC_DEB_GREEN, VIMC_DEB_BLUE } }
+	},
+};
+
+static const struct vimc_deb_pix_map *vimc_deb_pix_map_by_code(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vimc_deb_pix_map_list); i++)
+		if (vimc_deb_pix_map_list[i].code == code)
+			return &vimc_deb_pix_map_list[i];
+
+	return NULL;
+}
+
+static int vimc_deb_init_cfg(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_pad_config *cfg)
+{
+	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *mf;
+	unsigned int i;
+
+	mf = v4l2_subdev_get_try_format(sd, cfg, 0);
+	*mf = sink_fmt_default;
+
+	for (i = 1; i < sd->entity.num_pads; i++) {
+		mf = v4l2_subdev_get_try_format(sd, cfg, i);
+		*mf = sink_fmt_default;
+		mf->code = vdeb->src_code;
+	}
+
+	return 0;
+}
+
+static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_mbus_code_enum *code)
+{
+	/* We only support one format for source pads */
+	if (VIMC_IS_SRC(code->pad)) {
+		struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
+
+		if (code->index)
+			return -EINVAL;
+
+		code->code = vdeb->src_code;
+	} else {
+		if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list))
+			return -EINVAL;
+
+		code->code = vimc_deb_pix_map_list[code->index].code;
+	}
+
+	return 0;
+}
+
+static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_pad_config *cfg,
+				    struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
+
+	if (fse->index)
+		return -EINVAL;
+
+	if (VIMC_IS_SINK(fse->pad)) {
+		const struct vimc_deb_pix_map *vpix =
+			vimc_deb_pix_map_by_code(fse->code);
+
+		if (!vpix)
+			return -EINVAL;
+	} else if (fse->code != vdeb->src_code) {
+		return -EINVAL;
+	}
+
+	fse->min_width = VIMC_FRAME_MIN_WIDTH;
+	fse->max_width = VIMC_FRAME_MAX_WIDTH;
+	fse->min_height = VIMC_FRAME_MIN_HEIGHT;
+	fse->max_height = VIMC_FRAME_MAX_HEIGHT;
+
+	return 0;
+}
+
+static int vimc_deb_get_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_pad_config *cfg,
+			    struct v4l2_subdev_format *fmt)
+{
+	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
+
+	/* Get the current sink format */
+	fmt->format = fmt->which == V4L2_SUBDEV_FORMAT_TRY ?
+		      *v4l2_subdev_get_try_format(sd, cfg, 0) :
+		      vdeb->sink_fmt;
+
+	/* Set the right code for the source pad */
+	if (VIMC_IS_SRC(fmt->pad))
+		fmt->format.code = vdeb->src_code;
+
+	return 0;
+}
+
+static void vimc_deb_adjust_sink_fmt(struct v4l2_mbus_framefmt *fmt)
+{
+	const struct vimc_deb_pix_map *vpix;
+
+	/* Don't accept a code that is not on the debayer table */
+	vpix = vimc_deb_pix_map_by_code(fmt->code);
+	if (!vpix)
+		fmt->code = sink_fmt_default.code;
+
+	fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH,
+			     VIMC_FRAME_MAX_WIDTH) & ~1;
+	fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT,
+			      VIMC_FRAME_MAX_HEIGHT) & ~1;
+
+	if (fmt->field == V4L2_FIELD_ANY)
+		fmt->field = sink_fmt_default.field;
+
+	vimc_colorimetry_clamp(fmt);
+}
+
+static int vimc_deb_set_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_pad_config *cfg,
+			    struct v4l2_subdev_format *fmt)
+{
+	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *sink_fmt;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		/* Do not change the format while stream is on */
+		if (vdeb->src_frame)
+			return -EBUSY;
+
+		sink_fmt = &vdeb->sink_fmt;
+	} else {
+		sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+	}
+
+	/*
+	 * Do not change the format of the source pad,
+	 * it is propagated from the sink
+	 */
+	if (VIMC_IS_SRC(fmt->pad)) {
+		fmt->format = *sink_fmt;
+		/* TODO: Add support for other formats */
+		fmt->format.code = vdeb->src_code;
+	} else {
+		/* Set the new format in the sink pad */
+		vimc_deb_adjust_sink_fmt(&fmt->format);
+
+		dev_dbg(vdeb->ved.dev, "%s: sink format update: "
+			"old:%dx%d (0x%x, %d, %d, %d, %d) "
+			"new:%dx%d (0x%x, %d, %d, %d, %d)\n", vdeb->sd.name,
+			/* old */
+			sink_fmt->width, sink_fmt->height, sink_fmt->code,
+			sink_fmt->colorspace, sink_fmt->quantization,
+			sink_fmt->xfer_func, sink_fmt->ycbcr_enc,
+			/* new */
+			fmt->format.width, fmt->format.height, fmt->format.code,
+			fmt->format.colorspace,	fmt->format.quantization,
+			fmt->format.xfer_func, fmt->format.ycbcr_enc);
+
+		*sink_fmt = fmt->format;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_pad_ops vimc_deb_pad_ops = {
+	.init_cfg		= vimc_deb_init_cfg,
+	.enum_mbus_code		= vimc_deb_enum_mbus_code,
+	.enum_frame_size	= vimc_deb_enum_frame_size,
+	.get_fmt		= vimc_deb_get_fmt,
+	.set_fmt		= vimc_deb_set_fmt,
+};
+
+static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb,
+						  unsigned int lin,
+						  unsigned int col,
+						  unsigned int rgb[3])
+{
+	unsigned int i, index;
+
+	index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3);
+	for (i = 0; i < 3; i++)
+		vdeb->src_frame[index + i] = rgb[i];
+}
+
+static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
+
+	if (enable) {
+		const struct vimc_pix_map *vpix;
+		unsigned int frame_size;
+
+		if (vdeb->src_frame)
+			return 0;
+
+		/* Calculate the frame size of the source pad */
+		vpix = vimc_pix_map_by_code(vdeb->src_code);
+		frame_size = vdeb->sink_fmt.width * vdeb->sink_fmt.height *
+				vpix->bpp;
+
+		/* Save the bytes per pixel of the sink */
+		vpix = vimc_pix_map_by_code(vdeb->sink_fmt.code);
+		vdeb->sink_bpp = vpix->bpp;
+
+		/* Get the corresponding pixel map from the table */
+		vdeb->sink_pix_map =
+			vimc_deb_pix_map_by_code(vdeb->sink_fmt.code);
+
+		/*
+		 * Allocate the frame buffer. Use vmalloc to be able to
+		 * allocate a large amount of memory
+		 */
+		vdeb->src_frame = vmalloc(frame_size);
+		if (!vdeb->src_frame)
+			return -ENOMEM;
+
+	} else {
+		if (!vdeb->src_frame)
+			return 0;
+
+		vfree(vdeb->src_frame);
+		vdeb->src_frame = NULL;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops vimc_deb_core_ops = {
+	.log_status = v4l2_ctrl_subdev_log_status,
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_video_ops vimc_deb_video_ops = {
+	.s_stream = vimc_deb_s_stream,
+};
+
+static const struct v4l2_subdev_ops vimc_deb_ops = {
+	.core = &vimc_deb_core_ops,
+	.pad = &vimc_deb_pad_ops,
+	.video = &vimc_deb_video_ops,
+};
+
+static unsigned int vimc_deb_get_val(const u8 *bytes,
+				     const unsigned int n_bytes)
+{
+	unsigned int i;
+	unsigned int acc = 0;
+
+	for (i = 0; i < n_bytes; i++)
+		acc = acc + (bytes[i] << (8 * i));
+
+	return acc;
+}
+
+static void vimc_deb_calc_rgb_sink(struct vimc_deb_device *vdeb,
+				   const u8 *frame,
+				   const unsigned int lin,
+				   const unsigned int col,
+				   unsigned int rgb[3])
+{
+	unsigned int i, seek, wlin, wcol;
+	unsigned int n_rgb[3] = {0, 0, 0};
+
+	for (i = 0; i < 3; i++)
+		rgb[i] = 0;
+
+	/*
+	 * Calculate how many we need to subtract to get to the pixel in
+	 * the top left corner of the mean window (considering the current
+	 * pixel as the center)
+	 */
+	seek = vdeb->mean_win_size / 2;
+
+	/* Sum the values of the colors in the mean window */
+
+	dev_dbg(vdeb->ved.dev,
+		"deb: %s: --- Calc pixel %dx%d, window mean %d, seek %d ---\n",
+		vdeb->sd.name, lin, col, vdeb->sink_fmt.height, seek);
+
+	/*
+	 * Iterate through all the lines in the mean window, start
+	 * with zero if the pixel is outside the frame and don't pass
+	 * the height when the pixel is in the bottom border of the
+	 * frame
+	 */
+	for (wlin = seek > lin ? 0 : lin - seek;
+	     wlin < lin + seek + 1 && wlin < vdeb->sink_fmt.height;
+	     wlin++) {
+
+		/*
+		 * Iterate through all the columns in the mean window, start
+		 * with zero if the pixel is outside the frame and don't pass
+		 * the width when the pixel is in the right border of the
+		 * frame
+		 */
+		for (wcol = seek > col ? 0 : col - seek;
+		     wcol < col + seek + 1 && wcol < vdeb->sink_fmt.width;
+		     wcol++) {
+			enum vimc_deb_rgb_colors color;
+			unsigned int index;
+
+			/* Check which color this pixel is */
+			color = vdeb->sink_pix_map->order[wlin % 2][wcol % 2];
+
+			index = VIMC_FRAME_INDEX(wlin, wcol,
+						 vdeb->sink_fmt.width,
+						 vdeb->sink_bpp);
+
+			dev_dbg(vdeb->ved.dev,
+				"deb: %s: RGB CALC: frame index %d, win pos %dx%d, color %d\n",
+				vdeb->sd.name, index, wlin, wcol, color);
+
+			/* Get its value */
+			rgb[color] = rgb[color] +
+				vimc_deb_get_val(&frame[index], vdeb->sink_bpp);
+
+			/* Save how many values we already added */
+			n_rgb[color]++;
+
+			dev_dbg(vdeb->ved.dev, "deb: %s: RGB CALC: val %d, n %d\n",
+				vdeb->sd.name, rgb[color], n_rgb[color]);
+		}
+	}
+
+	/* Calculate the mean */
+	for (i = 0; i < 3; i++) {
+		dev_dbg(vdeb->ved.dev,
+			"deb: %s: PRE CALC: %dx%d Color %d, val %d, n %d\n",
+			vdeb->sd.name, lin, col, i, rgb[i], n_rgb[i]);
+
+		if (n_rgb[i])
+			rgb[i] = rgb[i] / n_rgb[i];
+
+		dev_dbg(vdeb->ved.dev,
+			"deb: %s: FINAL CALC: %dx%d Color %d, val %d\n",
+			vdeb->sd.name, lin, col, i, rgb[i]);
+	}
+}
+
+static void *vimc_deb_process_frame(struct vimc_ent_device *ved,
+				    const void *sink_frame)
+{
+	struct vimc_deb_device *vdeb = container_of(ved, struct vimc_deb_device,
+						    ved);
+	unsigned int rgb[3];
+	unsigned int i, j;
+
+	/* If the stream in this node is not active, just return */
+	if (!vdeb->src_frame)
+		return ERR_PTR(-EINVAL);
+
+	for (i = 0; i < vdeb->sink_fmt.height; i++)
+		for (j = 0; j < vdeb->sink_fmt.width; j++) {
+			vimc_deb_calc_rgb_sink(vdeb, sink_frame, i, j, rgb);
+			vdeb->set_rgb_src(vdeb, i, j, rgb);
+		}
+
+	return vdeb->src_frame;
+}
+
+static int vimc_deb_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vimc_deb_device *vdeb =
+		container_of(ctrl->handler, struct vimc_deb_device, hdl);
+
+	switch (ctrl->id) {
+	case VIMC_CID_MEAN_WIN_SIZE:
+		vdeb->mean_win_size = ctrl->val;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vimc_deb_ctrl_ops = {
+	.s_ctrl = vimc_deb_s_ctrl,
+};
+
+static void vimc_deb_release(struct vimc_ent_device *ved)
+{
+	struct vimc_deb_device *vdeb =
+		container_of(ved, struct vimc_deb_device, ved);
+
+	v4l2_ctrl_handler_free(&vdeb->hdl);
+	media_entity_cleanup(vdeb->ved.ent);
+	kfree(vdeb);
+}
+
+static const struct v4l2_ctrl_config vimc_deb_ctrl_class = {
+	.flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY,
+	.id = VIMC_CID_VIMC_CLASS,
+	.name = "VIMC Controls",
+	.type = V4L2_CTRL_TYPE_CTRL_CLASS,
+};
+
+static const struct v4l2_ctrl_config vimc_deb_ctrl_mean_win_size = {
+	.ops = &vimc_deb_ctrl_ops,
+	.id = VIMC_CID_MEAN_WIN_SIZE,
+	.name = "Debayer Mean Window Size",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 1,
+	.max = 25,
+	.step = 2,
+	.def = 3,
+};
+
+static struct vimc_ent_device *vimc_deb_add(struct vimc_device *vimc,
+					    const char *vcfg_name)
+{
+	struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
+	struct vimc_deb_device *vdeb;
+	int ret;
+
+	/* Allocate the vdeb struct */
+	vdeb = kzalloc(sizeof(*vdeb), GFP_KERNEL);
+	if (!vdeb)
+		return ERR_PTR(-ENOMEM);
+
+	/* Create controls: */
+	v4l2_ctrl_handler_init(&vdeb->hdl, 2);
+	v4l2_ctrl_new_custom(&vdeb->hdl, &vimc_deb_ctrl_class, NULL);
+	v4l2_ctrl_new_custom(&vdeb->hdl, &vimc_deb_ctrl_mean_win_size, NULL);
+	vdeb->sd.ctrl_handler = &vdeb->hdl;
+	if (vdeb->hdl.error) {
+		ret = vdeb->hdl.error;
+		goto err_free_vdeb;
+	}
+
+	/* Initialize ved and sd */
+	vdeb->pads[0].flags = MEDIA_PAD_FL_SINK;
+	vdeb->pads[1].flags = MEDIA_PAD_FL_SOURCE;
+
+	ret = vimc_ent_sd_register(&vdeb->ved, &vdeb->sd, v4l2_dev,
+				   vcfg_name,
+				   MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV, 2,
+				   vdeb->pads, &vimc_deb_ops);
+	if (ret)
+		goto err_free_hdl;
+
+	vdeb->ved.process_frame = vimc_deb_process_frame;
+	vdeb->ved.dev = vimc->mdev.dev;
+	vdeb->mean_win_size = vimc_deb_ctrl_mean_win_size.def;
+
+	/* Initialize the frame format */
+	vdeb->sink_fmt = sink_fmt_default;
+	/*
+	 * TODO: Add support for more output formats, we only support
+	 * RGB888 for now
+	 * NOTE: the src format is always the same as the sink, except
+	 * for the code
+	 */
+	vdeb->src_code = MEDIA_BUS_FMT_RGB888_1X24;
+	vdeb->set_rgb_src = vimc_deb_set_rgb_mbus_fmt_rgb888_1x24;
+
+	return &vdeb->ved;
+
+err_free_hdl:
+	v4l2_ctrl_handler_free(&vdeb->hdl);
+err_free_vdeb:
+	kfree(vdeb);
+
+	return ERR_PTR(ret);
+}
+
+struct vimc_ent_type vimc_deb_type = {
+	.add = vimc_deb_add,
+	.release = vimc_deb_release
+};
diff --git a/drivers/media/test-drivers/vimc/vimc-scaler.c b/drivers/media/test-drivers/vimc/vimc-scaler.c
new file mode 100644
index 000000000000..2231e72b24e2
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/vimc-scaler.c
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * vimc-scaler.c Virtual Media Controller Driver
+ *
+ * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/vmalloc.h>
+#include <linux/v4l2-mediabus.h>
+#include <media/v4l2-rect.h>
+#include <media/v4l2-subdev.h>
+
+#include "vimc-common.h"
+
+static unsigned int sca_mult = 3;
+module_param(sca_mult, uint, 0000);
+MODULE_PARM_DESC(sca_mult, " the image size multiplier");
+
+#define MAX_ZOOM	8
+
+#define VIMC_SCA_FMT_WIDTH_DEFAULT  640
+#define VIMC_SCA_FMT_HEIGHT_DEFAULT 480
+
+struct vimc_sca_device {
+	struct vimc_ent_device ved;
+	struct v4l2_subdev sd;
+	/* NOTE: the source fmt is the same as the sink
+	 * with the width and hight multiplied by mult
+	 */
+	struct v4l2_mbus_framefmt sink_fmt;
+	struct v4l2_rect crop_rect;
+	/* Values calculated when the stream starts */
+	u8 *src_frame;
+	unsigned int src_line_size;
+	unsigned int bpp;
+	struct media_pad pads[2];
+};
+
+static const struct v4l2_mbus_framefmt sink_fmt_default = {
+	.width = VIMC_SCA_FMT_WIDTH_DEFAULT,
+	.height = VIMC_SCA_FMT_HEIGHT_DEFAULT,
+	.code = MEDIA_BUS_FMT_RGB888_1X24,
+	.field = V4L2_FIELD_NONE,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+};
+
+static const struct v4l2_rect crop_rect_default = {
+	.width = VIMC_SCA_FMT_WIDTH_DEFAULT,
+	.height = VIMC_SCA_FMT_HEIGHT_DEFAULT,
+	.top = 0,
+	.left = 0,
+};
+
+static const struct v4l2_rect crop_rect_min = {
+	.width = VIMC_FRAME_MIN_WIDTH,
+	.height = VIMC_FRAME_MIN_HEIGHT,
+	.top = 0,
+	.left = 0,
+};
+
+static struct v4l2_rect
+vimc_sca_get_crop_bound_sink(const struct v4l2_mbus_framefmt *sink_fmt)
+{
+	/* Get the crop bounds to clamp the crop rectangle correctly */
+	struct v4l2_rect r = {
+		.left = 0,
+		.top = 0,
+		.width = sink_fmt->width,
+		.height = sink_fmt->height,
+	};
+	return r;
+}
+
+static void vimc_sca_adjust_sink_crop(struct v4l2_rect *r,
+				      const struct v4l2_mbus_framefmt *sink_fmt)
+{
+	const struct v4l2_rect sink_rect =
+		vimc_sca_get_crop_bound_sink(sink_fmt);
+
+	/* Disallow rectangles smaller than the minimal one. */
+	v4l2_rect_set_min_size(r, &crop_rect_min);
+	v4l2_rect_map_inside(r, &sink_rect);
+}
+
+static int vimc_sca_init_cfg(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_pad_config *cfg)
+{
+	struct v4l2_mbus_framefmt *mf;
+	struct v4l2_rect *r;
+	unsigned int i;
+
+	mf = v4l2_subdev_get_try_format(sd, cfg, 0);
+	*mf = sink_fmt_default;
+
+	r = v4l2_subdev_get_try_crop(sd, cfg, 0);
+	*r = crop_rect_default;
+
+	for (i = 1; i < sd->entity.num_pads; i++) {
+		mf = v4l2_subdev_get_try_format(sd, cfg, i);
+		*mf = sink_fmt_default;
+		mf->width = mf->width * sca_mult;
+		mf->height = mf->height * sca_mult;
+	}
+
+	return 0;
+}
+
+static int vimc_sca_enum_mbus_code(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_mbus_code_enum *code)
+{
+	const struct vimc_pix_map *vpix = vimc_pix_map_by_index(code->index);
+
+	/* We don't support bayer format */
+	if (!vpix || vpix->bayer)
+		return -EINVAL;
+
+	code->code = vpix->code;
+
+	return 0;
+}
+
+static int vimc_sca_enum_frame_size(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_pad_config *cfg,
+				    struct v4l2_subdev_frame_size_enum *fse)
+{
+	const struct vimc_pix_map *vpix;
+
+	if (fse->index)
+		return -EINVAL;
+
+	/* Only accept code in the pix map table in non bayer format */
+	vpix = vimc_pix_map_by_code(fse->code);
+	if (!vpix || vpix->bayer)
+		return -EINVAL;
+
+	fse->min_width = VIMC_FRAME_MIN_WIDTH;
+	fse->min_height = VIMC_FRAME_MIN_HEIGHT;
+
+	if (VIMC_IS_SINK(fse->pad)) {
+		fse->max_width = VIMC_FRAME_MAX_WIDTH;
+		fse->max_height = VIMC_FRAME_MAX_HEIGHT;
+	} else {
+		fse->max_width = VIMC_FRAME_MAX_WIDTH * MAX_ZOOM;
+		fse->max_height = VIMC_FRAME_MAX_HEIGHT * MAX_ZOOM;
+	}
+
+	return 0;
+}
+
+static int vimc_sca_get_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_pad_config *cfg,
+			    struct v4l2_subdev_format *format)
+{
+	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
+	struct v4l2_rect *crop_rect;
+
+	/* Get the current sink format */
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+		format->format = *v4l2_subdev_get_try_format(sd, cfg, 0);
+		crop_rect = v4l2_subdev_get_try_crop(sd, cfg, 0);
+	} else {
+		format->format = vsca->sink_fmt;
+		crop_rect = &vsca->crop_rect;
+	}
+
+	/* Scale the frame size for the source pad */
+	if (VIMC_IS_SRC(format->pad)) {
+		format->format.width = crop_rect->width * sca_mult;
+		format->format.height = crop_rect->height * sca_mult;
+	}
+
+	return 0;
+}
+
+static void vimc_sca_adjust_sink_fmt(struct v4l2_mbus_framefmt *fmt)
+{
+	const struct vimc_pix_map *vpix;
+
+	/* Only accept code in the pix map table in non bayer format */
+	vpix = vimc_pix_map_by_code(fmt->code);
+	if (!vpix || vpix->bayer)
+		fmt->code = sink_fmt_default.code;
+
+	fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH,
+			     VIMC_FRAME_MAX_WIDTH) & ~1;
+	fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT,
+			      VIMC_FRAME_MAX_HEIGHT) & ~1;
+
+	if (fmt->field == V4L2_FIELD_ANY)
+		fmt->field = sink_fmt_default.field;
+
+	vimc_colorimetry_clamp(fmt);
+}
+
+static int vimc_sca_set_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_pad_config *cfg,
+			    struct v4l2_subdev_format *fmt)
+{
+	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *sink_fmt;
+	struct v4l2_rect *crop_rect;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		/* Do not change the format while stream is on */
+		if (vsca->src_frame)
+			return -EBUSY;
+
+		sink_fmt = &vsca->sink_fmt;
+		crop_rect = &vsca->crop_rect;
+	} else {
+		sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+		crop_rect = v4l2_subdev_get_try_crop(sd, cfg, 0);
+	}
+
+	/*
+	 * Do not change the format of the source pad,
+	 * it is propagated from the sink
+	 */
+	if (VIMC_IS_SRC(fmt->pad)) {
+		fmt->format = *sink_fmt;
+		fmt->format.width = crop_rect->width * sca_mult;
+		fmt->format.height = crop_rect->height * sca_mult;
+	} else {
+		/* Set the new format in the sink pad */
+		vimc_sca_adjust_sink_fmt(&fmt->format);
+
+		dev_dbg(vsca->ved.dev, "%s: sink format update: "
+			"old:%dx%d (0x%x, %d, %d, %d, %d) "
+			"new:%dx%d (0x%x, %d, %d, %d, %d)\n", vsca->sd.name,
+			/* old */
+			sink_fmt->width, sink_fmt->height, sink_fmt->code,
+			sink_fmt->colorspace, sink_fmt->quantization,
+			sink_fmt->xfer_func, sink_fmt->ycbcr_enc,
+			/* new */
+			fmt->format.width, fmt->format.height, fmt->format.code,
+			fmt->format.colorspace,	fmt->format.quantization,
+			fmt->format.xfer_func, fmt->format.ycbcr_enc);
+
+		*sink_fmt = fmt->format;
+
+		/* Do the crop, but respect the current bounds */
+		vimc_sca_adjust_sink_crop(crop_rect, sink_fmt);
+	}
+
+	return 0;
+}
+
+static int vimc_sca_get_selection(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_pad_config *cfg,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *sink_fmt;
+	struct v4l2_rect *crop_rect;
+
+	if (VIMC_IS_SRC(sel->pad))
+		return -EINVAL;
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sink_fmt = &vsca->sink_fmt;
+		crop_rect = &vsca->crop_rect;
+	} else {
+		sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+		crop_rect = v4l2_subdev_get_try_crop(sd, cfg, 0);
+	}
+
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP:
+		sel->r = *crop_rect;
+		break;
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		sel->r = vimc_sca_get_crop_bound_sink(sink_fmt);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int vimc_sca_set_selection(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_pad_config *cfg,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *sink_fmt;
+	struct v4l2_rect *crop_rect;
+
+	if (VIMC_IS_SRC(sel->pad))
+		return -EINVAL;
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		/* Do not change the format while stream is on */
+		if (vsca->src_frame)
+			return -EBUSY;
+
+		crop_rect = &vsca->crop_rect;
+		sink_fmt = &vsca->sink_fmt;
+	} else {
+		crop_rect = v4l2_subdev_get_try_crop(sd, cfg, 0);
+		sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+	}
+
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP:
+		/* Do the crop, but respect the current bounds */
+		vimc_sca_adjust_sink_crop(&sel->r, sink_fmt);
+		*crop_rect = sel->r;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_pad_ops vimc_sca_pad_ops = {
+	.init_cfg		= vimc_sca_init_cfg,
+	.enum_mbus_code		= vimc_sca_enum_mbus_code,
+	.enum_frame_size	= vimc_sca_enum_frame_size,
+	.get_fmt		= vimc_sca_get_fmt,
+	.set_fmt		= vimc_sca_set_fmt,
+	.get_selection		= vimc_sca_get_selection,
+	.set_selection		= vimc_sca_set_selection,
+};
+
+static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
+
+	if (enable) {
+		const struct vimc_pix_map *vpix;
+		unsigned int frame_size;
+
+		if (vsca->src_frame)
+			return 0;
+
+		/* Save the bytes per pixel of the sink */
+		vpix = vimc_pix_map_by_code(vsca->sink_fmt.code);
+		vsca->bpp = vpix->bpp;
+
+		/* Calculate the width in bytes of the src frame */
+		vsca->src_line_size = vsca->crop_rect.width *
+				      sca_mult * vsca->bpp;
+
+		/* Calculate the frame size of the source pad */
+		frame_size = vsca->src_line_size * vsca->crop_rect.height *
+			     sca_mult;
+
+		/* Allocate the frame buffer. Use vmalloc to be able to
+		 * allocate a large amount of memory
+		 */
+		vsca->src_frame = vmalloc(frame_size);
+		if (!vsca->src_frame)
+			return -ENOMEM;
+
+	} else {
+		if (!vsca->src_frame)
+			return 0;
+
+		vfree(vsca->src_frame);
+		vsca->src_frame = NULL;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops vimc_sca_video_ops = {
+	.s_stream = vimc_sca_s_stream,
+};
+
+static const struct v4l2_subdev_ops vimc_sca_ops = {
+	.pad = &vimc_sca_pad_ops,
+	.video = &vimc_sca_video_ops,
+};
+
+static void vimc_sca_fill_pix(u8 *const ptr,
+			      const u8 *const pixel,
+			      const unsigned int bpp)
+{
+	unsigned int i;
+
+	/* copy the pixel to the pointer */
+	for (i = 0; i < bpp; i++)
+		ptr[i] = pixel[i];
+}
+
+static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca,
+			       unsigned int lin, unsigned int col,
+			       const u8 *const sink_frame)
+{
+	const struct v4l2_rect crop_rect = vsca->crop_rect;
+	unsigned int i, j, index;
+	const u8 *pixel;
+
+	/* Point to the pixel value in position (lin, col) in the sink frame */
+	index = VIMC_FRAME_INDEX(lin, col,
+				 vsca->sink_fmt.width,
+				 vsca->bpp);
+	pixel = &sink_frame[index];
+
+	dev_dbg(vsca->ved.dev,
+		"sca: %s: --- scale_pix sink pos %dx%d, index %d ---\n",
+		vsca->sd.name, lin, col, index);
+
+	/* point to the place we are going to put the first pixel
+	 * in the scaled src frame
+	 */
+	lin -= crop_rect.top;
+	col -= crop_rect.left;
+	index = VIMC_FRAME_INDEX(lin * sca_mult, col * sca_mult,
+				 crop_rect.width * sca_mult, vsca->bpp);
+
+	dev_dbg(vsca->ved.dev, "sca: %s: scale_pix src pos %dx%d, index %d\n",
+		vsca->sd.name, lin * sca_mult, col * sca_mult, index);
+
+	/* Repeat this pixel mult times */
+	for (i = 0; i < sca_mult; i++) {
+		/* Iterate through each beginning of a
+		 * pixel repetition in a line
+		 */
+		for (j = 0; j < sca_mult * vsca->bpp; j += vsca->bpp) {
+			dev_dbg(vsca->ved.dev,
+				"sca: %s: sca: scale_pix src pos %d\n",
+				vsca->sd.name, index + j);
+
+			/* copy the pixel to the position index + j */
+			vimc_sca_fill_pix(&vsca->src_frame[index + j],
+					  pixel, vsca->bpp);
+		}
+
+		/* move the index to the next line */
+		index += vsca->src_line_size;
+	}
+}
+
+static void vimc_sca_fill_src_frame(const struct vimc_sca_device *const vsca,
+				    const u8 *const sink_frame)
+{
+	const struct v4l2_rect r = vsca->crop_rect;
+	unsigned int i, j;
+
+	/* Scale each pixel from the original sink frame */
+	/* TODO: implement scale down, only scale up is supported for now */
+	for (i = r.top; i < r.top + r.height; i++)
+		for (j = r.left; j < r.left + r.width; j++)
+			vimc_sca_scale_pix(vsca, i, j, sink_frame);
+}
+
+static void *vimc_sca_process_frame(struct vimc_ent_device *ved,
+				    const void *sink_frame)
+{
+	struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device,
+						    ved);
+
+	/* If the stream in this node is not active, just return */
+	if (!vsca->src_frame)
+		return ERR_PTR(-EINVAL);
+
+	vimc_sca_fill_src_frame(vsca, sink_frame);
+
+	return vsca->src_frame;
+};
+
+static void vimc_sca_release(struct vimc_ent_device *ved)
+{
+	struct vimc_sca_device *vsca =
+		container_of(ved, struct vimc_sca_device, ved);
+
+	media_entity_cleanup(vsca->ved.ent);
+	kfree(vsca);
+}
+
+static struct vimc_ent_device *vimc_sca_add(struct vimc_device *vimc,
+					    const char *vcfg_name)
+{
+	struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
+	struct vimc_sca_device *vsca;
+	int ret;
+
+	/* Allocate the vsca struct */
+	vsca = kzalloc(sizeof(*vsca), GFP_KERNEL);
+	if (!vsca)
+		return ERR_PTR(-ENOMEM);
+
+	/* Initialize ved and sd */
+	vsca->pads[0].flags = MEDIA_PAD_FL_SINK;
+	vsca->pads[1].flags = MEDIA_PAD_FL_SOURCE;
+
+	ret = vimc_ent_sd_register(&vsca->ved, &vsca->sd, v4l2_dev,
+				   vcfg_name,
+				   MEDIA_ENT_F_PROC_VIDEO_SCALER, 2,
+				   vsca->pads, &vimc_sca_ops);
+	if (ret) {
+		kfree(vsca);
+		return ERR_PTR(ret);
+	}
+
+	vsca->ved.process_frame = vimc_sca_process_frame;
+	vsca->ved.dev = vimc->mdev.dev;
+
+	/* Initialize the frame format */
+	vsca->sink_fmt = sink_fmt_default;
+
+	/* Initialize the crop selection */
+	vsca->crop_rect = crop_rect_default;
+
+	return &vsca->ved;
+}
+
+struct vimc_ent_type vimc_sca_type = {
+	.add = vimc_sca_add,
+	.release = vimc_sca_release
+};
diff --git a/drivers/media/test-drivers/vimc/vimc-sensor.c b/drivers/media/test-drivers/vimc/vimc-sensor.c
new file mode 100644
index 000000000000..56e8ec14be46
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/vimc-sensor.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * vimc-sensor.c Virtual Media Controller Driver
+ *
+ * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com>
+ */
+
+#include <linux/v4l2-mediabus.h>
+#include <linux/vmalloc.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-subdev.h>
+#include <media/tpg/v4l2-tpg.h>
+
+#include "vimc-common.h"
+
+struct vimc_sen_device {
+	struct vimc_ent_device ved;
+	struct v4l2_subdev sd;
+	struct tpg_data tpg;
+	u8 *frame;
+	/* The active format */
+	struct v4l2_mbus_framefmt mbus_format;
+	struct v4l2_ctrl_handler hdl;
+	struct media_pad pad;
+};
+
+static const struct v4l2_mbus_framefmt fmt_default = {
+	.width = 640,
+	.height = 480,
+	.code = MEDIA_BUS_FMT_RGB888_1X24,
+	.field = V4L2_FIELD_NONE,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+};
+
+static int vimc_sen_init_cfg(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_pad_config *cfg)
+{
+	unsigned int i;
+
+	for (i = 0; i < sd->entity.num_pads; i++) {
+		struct v4l2_mbus_framefmt *mf;
+
+		mf = v4l2_subdev_get_try_format(sd, cfg, i);
+		*mf = fmt_default;
+	}
+
+	return 0;
+}
+
+static int vimc_sen_enum_mbus_code(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_mbus_code_enum *code)
+{
+	const struct vimc_pix_map *vpix = vimc_pix_map_by_index(code->index);
+
+	if (!vpix)
+		return -EINVAL;
+
+	code->code = vpix->code;
+
+	return 0;
+}
+
+static int vimc_sen_enum_frame_size(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_pad_config *cfg,
+				    struct v4l2_subdev_frame_size_enum *fse)
+{
+	const struct vimc_pix_map *vpix;
+
+	if (fse->index)
+		return -EINVAL;
+
+	/* Only accept code in the pix map table */
+	vpix = vimc_pix_map_by_code(fse->code);
+	if (!vpix)
+		return -EINVAL;
+
+	fse->min_width = VIMC_FRAME_MIN_WIDTH;
+	fse->max_width = VIMC_FRAME_MAX_WIDTH;
+	fse->min_height = VIMC_FRAME_MIN_HEIGHT;
+	fse->max_height = VIMC_FRAME_MAX_HEIGHT;
+
+	return 0;
+}
+
+static int vimc_sen_get_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_pad_config *cfg,
+			    struct v4l2_subdev_format *fmt)
+{
+	struct vimc_sen_device *vsen =
+				container_of(sd, struct vimc_sen_device, sd);
+
+	fmt->format = fmt->which == V4L2_SUBDEV_FORMAT_TRY ?
+		      *v4l2_subdev_get_try_format(sd, cfg, fmt->pad) :
+		      vsen->mbus_format;
+
+	return 0;
+}
+
+static void vimc_sen_tpg_s_format(struct vimc_sen_device *vsen)
+{
+	const struct vimc_pix_map *vpix =
+				vimc_pix_map_by_code(vsen->mbus_format.code);
+
+	tpg_reset_source(&vsen->tpg, vsen->mbus_format.width,
+			 vsen->mbus_format.height, vsen->mbus_format.field);
+	tpg_s_bytesperline(&vsen->tpg, 0, vsen->mbus_format.width * vpix->bpp);
+	tpg_s_buf_height(&vsen->tpg, vsen->mbus_format.height);
+	tpg_s_fourcc(&vsen->tpg, vpix->pixelformat);
+	/* TODO: add support for V4L2_FIELD_ALTERNATE */
+	tpg_s_field(&vsen->tpg, vsen->mbus_format.field, false);
+	tpg_s_colorspace(&vsen->tpg, vsen->mbus_format.colorspace);
+	tpg_s_ycbcr_enc(&vsen->tpg, vsen->mbus_format.ycbcr_enc);
+	tpg_s_quantization(&vsen->tpg, vsen->mbus_format.quantization);
+	tpg_s_xfer_func(&vsen->tpg, vsen->mbus_format.xfer_func);
+}
+
+static void vimc_sen_adjust_fmt(struct v4l2_mbus_framefmt *fmt)
+{
+	const struct vimc_pix_map *vpix;
+
+	/* Only accept code in the pix map table */
+	vpix = vimc_pix_map_by_code(fmt->code);
+	if (!vpix)
+		fmt->code = fmt_default.code;
+
+	fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH,
+			     VIMC_FRAME_MAX_WIDTH) & ~1;
+	fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT,
+			      VIMC_FRAME_MAX_HEIGHT) & ~1;
+
+	/* TODO: add support for V4L2_FIELD_ALTERNATE */
+	if (fmt->field == V4L2_FIELD_ANY || fmt->field == V4L2_FIELD_ALTERNATE)
+		fmt->field = fmt_default.field;
+
+	vimc_colorimetry_clamp(fmt);
+}
+
+static int vimc_sen_set_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_pad_config *cfg,
+			    struct v4l2_subdev_format *fmt)
+{
+	struct vimc_sen_device *vsen = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *mf;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		/* Do not change the format while stream is on */
+		if (vsen->frame)
+			return -EBUSY;
+
+		mf = &vsen->mbus_format;
+	} else {
+		mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
+	}
+
+	/* Set the new format */
+	vimc_sen_adjust_fmt(&fmt->format);
+
+	dev_dbg(vsen->ved.dev, "%s: format update: "
+		"old:%dx%d (0x%x, %d, %d, %d, %d) "
+		"new:%dx%d (0x%x, %d, %d, %d, %d)\n", vsen->sd.name,
+		/* old */
+		mf->width, mf->height, mf->code,
+		mf->colorspace,	mf->quantization,
+		mf->xfer_func, mf->ycbcr_enc,
+		/* new */
+		fmt->format.width, fmt->format.height, fmt->format.code,
+		fmt->format.colorspace, fmt->format.quantization,
+		fmt->format.xfer_func, fmt->format.ycbcr_enc);
+
+	*mf = fmt->format;
+
+	return 0;
+}
+
+static const struct v4l2_subdev_pad_ops vimc_sen_pad_ops = {
+	.init_cfg		= vimc_sen_init_cfg,
+	.enum_mbus_code		= vimc_sen_enum_mbus_code,
+	.enum_frame_size	= vimc_sen_enum_frame_size,
+	.get_fmt		= vimc_sen_get_fmt,
+	.set_fmt		= vimc_sen_set_fmt,
+};
+
+static void *vimc_sen_process_frame(struct vimc_ent_device *ved,
+				    const void *sink_frame)
+{
+	struct vimc_sen_device *vsen = container_of(ved, struct vimc_sen_device,
+						    ved);
+
+	tpg_fill_plane_buffer(&vsen->tpg, 0, 0, vsen->frame);
+	return vsen->frame;
+}
+
+static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct vimc_sen_device *vsen =
+				container_of(sd, struct vimc_sen_device, sd);
+
+	if (enable) {
+		const struct vimc_pix_map *vpix;
+		unsigned int frame_size;
+
+		/* Calculate the frame size */
+		vpix = vimc_pix_map_by_code(vsen->mbus_format.code);
+		frame_size = vsen->mbus_format.width * vpix->bpp *
+			     vsen->mbus_format.height;
+
+		/*
+		 * Allocate the frame buffer. Use vmalloc to be able to
+		 * allocate a large amount of memory
+		 */
+		vsen->frame = vmalloc(frame_size);
+		if (!vsen->frame)
+			return -ENOMEM;
+
+		/* configure the test pattern generator */
+		vimc_sen_tpg_s_format(vsen);
+
+	} else {
+
+		vfree(vsen->frame);
+		vsen->frame = NULL;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops vimc_sen_core_ops = {
+	.log_status = v4l2_ctrl_subdev_log_status,
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_video_ops vimc_sen_video_ops = {
+	.s_stream = vimc_sen_s_stream,
+};
+
+static const struct v4l2_subdev_ops vimc_sen_ops = {
+	.core = &vimc_sen_core_ops,
+	.pad = &vimc_sen_pad_ops,
+	.video = &vimc_sen_video_ops,
+};
+
+static int vimc_sen_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vimc_sen_device *vsen =
+		container_of(ctrl->handler, struct vimc_sen_device, hdl);
+
+	switch (ctrl->id) {
+	case VIMC_CID_TEST_PATTERN:
+		tpg_s_pattern(&vsen->tpg, ctrl->val);
+		break;
+	case V4L2_CID_HFLIP:
+		tpg_s_hflip(&vsen->tpg, ctrl->val);
+		break;
+	case V4L2_CID_VFLIP:
+		tpg_s_vflip(&vsen->tpg, ctrl->val);
+		break;
+	case V4L2_CID_BRIGHTNESS:
+		tpg_s_brightness(&vsen->tpg, ctrl->val);
+		break;
+	case V4L2_CID_CONTRAST:
+		tpg_s_contrast(&vsen->tpg, ctrl->val);
+		break;
+	case V4L2_CID_HUE:
+		tpg_s_hue(&vsen->tpg, ctrl->val);
+		break;
+	case V4L2_CID_SATURATION:
+		tpg_s_saturation(&vsen->tpg, ctrl->val);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vimc_sen_ctrl_ops = {
+	.s_ctrl = vimc_sen_s_ctrl,
+};
+
+static void vimc_sen_release(struct vimc_ent_device *ved)
+{
+	struct vimc_sen_device *vsen =
+		container_of(ved, struct vimc_sen_device, ved);
+
+	v4l2_ctrl_handler_free(&vsen->hdl);
+	tpg_free(&vsen->tpg);
+	media_entity_cleanup(vsen->ved.ent);
+	kfree(vsen);
+}
+
+/* Image Processing Controls */
+static const struct v4l2_ctrl_config vimc_sen_ctrl_class = {
+	.flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY,
+	.id = VIMC_CID_VIMC_CLASS,
+	.name = "VIMC Controls",
+	.type = V4L2_CTRL_TYPE_CTRL_CLASS,
+};
+
+static const struct v4l2_ctrl_config vimc_sen_ctrl_test_pattern = {
+	.ops = &vimc_sen_ctrl_ops,
+	.id = VIMC_CID_TEST_PATTERN,
+	.name = "Test Pattern",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = TPG_PAT_NOISE,
+	.qmenu = tpg_pattern_strings,
+};
+
+static struct vimc_ent_device *vimc_sen_add(struct vimc_device *vimc,
+					    const char *vcfg_name)
+{
+	struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
+	struct vimc_sen_device *vsen;
+	int ret;
+
+	/* Allocate the vsen struct */
+	vsen = kzalloc(sizeof(*vsen), GFP_KERNEL);
+	if (!vsen)
+		return ERR_PTR(-ENOMEM);
+
+	v4l2_ctrl_handler_init(&vsen->hdl, 4);
+
+	v4l2_ctrl_new_custom(&vsen->hdl, &vimc_sen_ctrl_class, NULL);
+	v4l2_ctrl_new_custom(&vsen->hdl, &vimc_sen_ctrl_test_pattern, NULL);
+	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
+			  V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
+			  V4L2_CID_HFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
+			  V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
+			  V4L2_CID_CONTRAST, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
+			  V4L2_CID_HUE, -128, 127, 1, 0);
+	v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
+			  V4L2_CID_SATURATION, 0, 255, 1, 128);
+	vsen->sd.ctrl_handler = &vsen->hdl;
+	if (vsen->hdl.error) {
+		ret = vsen->hdl.error;
+		goto err_free_vsen;
+	}
+
+	/* Initialize the test pattern generator */
+	tpg_init(&vsen->tpg, vsen->mbus_format.width,
+		 vsen->mbus_format.height);
+	ret = tpg_alloc(&vsen->tpg, VIMC_FRAME_MAX_WIDTH);
+	if (ret)
+		goto err_free_hdl;
+
+	/* Initialize ved and sd */
+	vsen->pad.flags = MEDIA_PAD_FL_SOURCE;
+	ret = vimc_ent_sd_register(&vsen->ved, &vsen->sd, v4l2_dev,
+				   vcfg_name,
+				   MEDIA_ENT_F_CAM_SENSOR, 1, &vsen->pad,
+				   &vimc_sen_ops);
+	if (ret)
+		goto err_free_tpg;
+
+	vsen->ved.process_frame = vimc_sen_process_frame;
+	vsen->ved.dev = vimc->mdev.dev;
+
+	/* Initialize the frame format */
+	vsen->mbus_format = fmt_default;
+
+	return &vsen->ved;
+
+err_free_tpg:
+	tpg_free(&vsen->tpg);
+err_free_hdl:
+	v4l2_ctrl_handler_free(&vsen->hdl);
+err_free_vsen:
+	kfree(vsen);
+
+	return ERR_PTR(ret);
+}
+
+struct vimc_ent_type vimc_sen_type = {
+	.add = vimc_sen_add,
+	.release = vimc_sen_release
+};
diff --git a/drivers/media/test-drivers/vimc/vimc-streamer.c b/drivers/media/test-drivers/vimc/vimc-streamer.c
new file mode 100644
index 000000000000..65feb3c596db
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/vimc-streamer.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * vimc-streamer.c Virtual Media Controller Driver
+ *
+ * Copyright (C) 2018 Lucas A. M. Magalhães <lucmaga@gmail.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
+
+#include "vimc-streamer.h"
+
+/**
+ * vimc_get_source_entity - get the entity connected with the first sink pad
+ *
+ * @ent:	reference media_entity
+ *
+ * Helper function that returns the media entity containing the source pad
+ * linked with the first sink pad from the given media entity pad list.
+ *
+ * Return: The source pad or NULL, if it wasn't found.
+ */
+static struct media_entity *vimc_get_source_entity(struct media_entity *ent)
+{
+	struct media_pad *pad;
+	int i;
+
+	for (i = 0; i < ent->num_pads; i++) {
+		if (ent->pads[i].flags & MEDIA_PAD_FL_SOURCE)
+			continue;
+		pad = media_entity_remote_pad(&ent->pads[i]);
+		return pad ? pad->entity : NULL;
+	}
+	return NULL;
+}
+
+/**
+ * vimc_streamer_pipeline_terminate - Disable stream in all ved in stream
+ *
+ * @stream: the pointer to the stream structure with the pipeline to be
+ *	    disabled.
+ *
+ * Calls s_stream to disable the stream in each entity of the pipeline
+ *
+ */
+static void vimc_streamer_pipeline_terminate(struct vimc_stream *stream)
+{
+	struct vimc_ent_device *ved;
+	struct v4l2_subdev *sd;
+
+	while (stream->pipe_size) {
+		stream->pipe_size--;
+		ved = stream->ved_pipeline[stream->pipe_size];
+		stream->ved_pipeline[stream->pipe_size] = NULL;
+
+		if (!is_media_entity_v4l2_subdev(ved->ent))
+			continue;
+
+		sd = media_entity_to_v4l2_subdev(ved->ent);
+		v4l2_subdev_call(sd, video, s_stream, 0);
+	}
+}
+
+/**
+ * vimc_streamer_pipeline_init - Initializes the stream structure
+ *
+ * @stream: the pointer to the stream structure to be initialized
+ * @ved:    the pointer to the vimc entity initializing the stream
+ *
+ * Initializes the stream structure. Walks through the entity graph to
+ * construct the pipeline used later on the streamer thread.
+ * Calls vimc_streamer_s_stream() to enable stream in all entities of
+ * the pipeline.
+ *
+ * Return: 0 if success, error code otherwise.
+ */
+static int vimc_streamer_pipeline_init(struct vimc_stream *stream,
+				       struct vimc_ent_device *ved)
+{
+	struct media_entity *entity;
+	struct video_device *vdev;
+	struct v4l2_subdev *sd;
+	int ret = 0;
+
+	stream->pipe_size = 0;
+	while (stream->pipe_size < VIMC_STREAMER_PIPELINE_MAX_SIZE) {
+		if (!ved) {
+			vimc_streamer_pipeline_terminate(stream);
+			return -EINVAL;
+		}
+		stream->ved_pipeline[stream->pipe_size++] = ved;
+
+		if (is_media_entity_v4l2_subdev(ved->ent)) {
+			sd = media_entity_to_v4l2_subdev(ved->ent);
+			ret = v4l2_subdev_call(sd, video, s_stream, 1);
+			if (ret && ret != -ENOIOCTLCMD) {
+				dev_err(ved->dev, "subdev_call error %s\n",
+					ved->ent->name);
+				vimc_streamer_pipeline_terminate(stream);
+				return ret;
+			}
+		}
+
+		entity = vimc_get_source_entity(ved->ent);
+		/* Check if the end of the pipeline was reached */
+		if (!entity) {
+			/* the first entity of the pipe should be source only */
+			if (!vimc_is_source(ved->ent)) {
+				dev_err(ved->dev,
+					"first entity in the pipe '%s' is not a source\n",
+					ved->ent->name);
+				vimc_streamer_pipeline_terminate(stream);
+				return -EPIPE;
+			}
+			return 0;
+		}
+
+		/* Get the next device in the pipeline */
+		if (is_media_entity_v4l2_subdev(entity)) {
+			sd = media_entity_to_v4l2_subdev(entity);
+			ved = v4l2_get_subdevdata(sd);
+		} else {
+			vdev = container_of(entity,
+					    struct video_device,
+					    entity);
+			ved = video_get_drvdata(vdev);
+		}
+	}
+
+	vimc_streamer_pipeline_terminate(stream);
+	return -EINVAL;
+}
+
+/**
+ * vimc_streamer_thread - Process frames through the pipeline
+ *
+ * @data:	vimc_stream struct of the current stream
+ *
+ * From the source to the sink, gets a frame from each subdevice and send to
+ * the next one of the pipeline at a fixed framerate.
+ *
+ * Return:
+ * Always zero (created as ``int`` instead of ``void`` to comply with
+ * kthread API).
+ */
+static int vimc_streamer_thread(void *data)
+{
+	struct vimc_stream *stream = data;
+	u8 *frame = NULL;
+	int i;
+
+	set_freezable();
+
+	for (;;) {
+		try_to_freeze();
+		if (kthread_should_stop())
+			break;
+
+		for (i = stream->pipe_size - 1; i >= 0; i--) {
+			frame = stream->ved_pipeline[i]->process_frame(
+					stream->ved_pipeline[i], frame);
+			if (!frame || IS_ERR(frame))
+				break;
+		}
+		//wait for 60hz
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(HZ / 60);
+	}
+
+	return 0;
+}
+
+/**
+ * vimc_streamer_s_stream - Start/stop the streaming on the media pipeline
+ *
+ * @stream:	the pointer to the stream structure of the current stream
+ * @ved:	pointer to the vimc entity of the entity of the stream
+ * @enable:	flag to determine if stream should start/stop
+ *
+ * When starting, check if there is no ``stream->kthread`` allocated. This
+ * should indicate that a stream is already running. Then, it initializes the
+ * pipeline, creates and runs a kthread to consume buffers through the pipeline.
+ * When stopping, analogously check if there is a stream running, stop the
+ * thread and terminates the pipeline.
+ *
+ * Return: 0 if success, error code otherwise.
+ */
+int vimc_streamer_s_stream(struct vimc_stream *stream,
+			   struct vimc_ent_device *ved,
+			   int enable)
+{
+	int ret;
+
+	if (!stream || !ved)
+		return -EINVAL;
+
+	if (enable) {
+		if (stream->kthread)
+			return 0;
+
+		ret = vimc_streamer_pipeline_init(stream, ved);
+		if (ret)
+			return ret;
+
+		stream->kthread = kthread_run(vimc_streamer_thread, stream,
+					      "vimc-streamer thread");
+
+		if (IS_ERR(stream->kthread)) {
+			ret = PTR_ERR(stream->kthread);
+			dev_err(ved->dev, "kthread_run failed with %d\n", ret);
+			vimc_streamer_pipeline_terminate(stream);
+			stream->kthread = NULL;
+			return ret;
+		}
+
+	} else {
+		if (!stream->kthread)
+			return 0;
+
+		ret = kthread_stop(stream->kthread);
+		/*
+		 * kthread_stop returns -EINTR in cases when streamon was
+		 * immediately followed by streamoff, and the thread didn't had
+		 * a chance to run. Ignore errors to stop the stream in the
+		 * pipeline.
+		 */
+		if (ret)
+			dev_dbg(ved->dev, "kthread_stop returned '%d'\n", ret);
+
+		stream->kthread = NULL;
+
+		vimc_streamer_pipeline_terminate(stream);
+	}
+
+	return 0;
+}
diff --git a/drivers/media/test-drivers/vimc/vimc-streamer.h b/drivers/media/test-drivers/vimc/vimc-streamer.h
new file mode 100644
index 000000000000..3bb6731b8d4d
--- /dev/null
+++ b/drivers/media/test-drivers/vimc/vimc-streamer.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * vimc-streamer.h Virtual Media Controller Driver
+ *
+ * Copyright (C) 2018 Lucas A. M. Magalhães <lucmaga@gmail.com>
+ *
+ */
+
+#ifndef _VIMC_STREAMER_H_
+#define _VIMC_STREAMER_H_
+
+#include <media/media-device.h>
+
+#include "vimc-common.h"
+
+#define VIMC_STREAMER_PIPELINE_MAX_SIZE 16
+
+/**
+ * struct vimc_stream - struct that represents a stream in the pipeline
+ *
+ * @pipe:		the media pipeline object associated with this stream
+ * @ved_pipeline:	array containing all the entities participating in the
+ * 			stream. The order is from a video device (usually a
+ *			capture device) where stream_on was called, to the
+ *			entity generating the first base image to be
+ *			processed in the pipeline.
+ * @pipe_size:		size of @ved_pipeline
+ * @kthread:		thread that generates the frames of the stream.
+ *
+ * When the user call stream_on in a video device, struct vimc_stream is
+ * used to keep track of all entities and subdevices that generates and
+ * process frames for the stream.
+ */
+struct vimc_stream {
+	struct media_pipeline pipe;
+	struct vimc_ent_device *ved_pipeline[VIMC_STREAMER_PIPELINE_MAX_SIZE];
+	unsigned int pipe_size;
+	struct task_struct *kthread;
+};
+
+int vimc_streamer_s_stream(struct vimc_stream *stream,
+			   struct vimc_ent_device *ved,
+			   int enable);
+
+#endif  //_VIMC_STREAMER_H_
diff --git a/drivers/media/test-drivers/vivid/Kconfig b/drivers/media/test-drivers/vivid/Kconfig
new file mode 100644
index 000000000000..c3abde2986b2
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/Kconfig
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_VIVID
+	tristate "Virtual Video Test Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FB
+	depends on HAS_DMA
+	select FONT_SUPPORT
+	select FONT_8x16
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VIDEOBUF2_VMALLOC
+	select VIDEOBUF2_DMA_CONTIG
+	select VIDEO_V4L2_TPG
+	select MEDIA_CONTROLLER
+	select MEDIA_CONTROLLER_REQUEST_API
+	help
+	  Enables a virtual video driver. This driver emulates a webcam,
+	  TV, S-Video and HDMI capture hardware, including VBI support for
+	  the SDTV inputs. Also video output, VBI output, radio receivers,
+	  transmitters and software defined radio capture is emulated.
+
+	  It is highly configurable and is ideal for testing applications.
+	  Error injection is supported to test rare errors that are hard
+	  to reproduce in real hardware.
+
+	  Say Y here if you want to test video apps or debug V4L devices.
+	  When in doubt, say N.
+
+config VIDEO_VIVID_CEC
+	bool "Enable CEC emulation support"
+	depends on VIDEO_VIVID
+	select CEC_CORE
+	help
+	  When selected the vivid module will emulate the optional
+	  HDMI CEC feature.
+
+config VIDEO_VIVID_MAX_DEVS
+	int "Maximum number of devices"
+	depends on VIDEO_VIVID
+	default "64"
+	help
+	  This allows you to specify the maximum number of devices supported
+	  by the vivid driver.
diff --git a/drivers/media/test-drivers/vivid/Makefile b/drivers/media/test-drivers/vivid/Makefile
new file mode 100644
index 000000000000..b12ad0152a3e
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+vivid-objs := vivid-core.o vivid-ctrls.o vivid-vid-common.o vivid-vbi-gen.o \
+		vivid-vid-cap.o vivid-vid-out.o vivid-kthread-cap.o vivid-kthread-out.o \
+		vivid-radio-rx.o vivid-radio-tx.o vivid-radio-common.o \
+		vivid-rds-gen.o vivid-sdr-cap.o vivid-vbi-cap.o vivid-vbi-out.o \
+		vivid-osd.o vivid-meta-cap.o vivid-meta-out.o \
+		vivid-kthread-touch.o vivid-touch-cap.o
+ifeq ($(CONFIG_VIDEO_VIVID_CEC),y)
+  vivid-objs += vivid-cec.o
+endif
+
+obj-$(CONFIG_VIDEO_VIVID) += vivid.o
diff --git a/drivers/media/test-drivers/vivid/vivid-cec.c b/drivers/media/test-drivers/vivid/vivid-cec.c
new file mode 100644
index 000000000000..4d2413e87730
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-cec.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-cec.c - A Virtual Video Test Driver, cec emulation
+ *
+ * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <media/cec.h>
+
+#include "vivid-core.h"
+#include "vivid-cec.h"
+
+#define CEC_TIM_START_BIT_TOTAL		4500
+#define CEC_TIM_START_BIT_LOW		3700
+#define CEC_TIM_START_BIT_HIGH		800
+#define CEC_TIM_DATA_BIT_TOTAL		2400
+#define CEC_TIM_DATA_BIT_0_LOW		1500
+#define CEC_TIM_DATA_BIT_0_HIGH		900
+#define CEC_TIM_DATA_BIT_1_LOW		600
+#define CEC_TIM_DATA_BIT_1_HIGH		1800
+
+void vivid_cec_bus_free_work(struct vivid_dev *dev)
+{
+	spin_lock(&dev->cec_slock);
+	while (!list_empty(&dev->cec_work_list)) {
+		struct vivid_cec_work *cw =
+			list_first_entry(&dev->cec_work_list,
+					 struct vivid_cec_work, list);
+
+		spin_unlock(&dev->cec_slock);
+		cancel_delayed_work_sync(&cw->work);
+		spin_lock(&dev->cec_slock);
+		list_del(&cw->list);
+		cec_transmit_attempt_done(cw->adap, CEC_TX_STATUS_LOW_DRIVE);
+		kfree(cw);
+	}
+	spin_unlock(&dev->cec_slock);
+}
+
+static bool vivid_cec_find_dest_adap(struct vivid_dev *dev,
+				     struct cec_adapter *adap, u8 dest)
+{
+	unsigned int i;
+
+	if (dest >= 0xf)
+		return false;
+
+	if (adap != dev->cec_rx_adap && dev->cec_rx_adap &&
+	    dev->cec_rx_adap->is_configured &&
+	    cec_has_log_addr(dev->cec_rx_adap, dest))
+		return true;
+
+	for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++) {
+		if (adap == dev->cec_tx_adap[i])
+			continue;
+		if (!dev->cec_tx_adap[i]->is_configured)
+			continue;
+		if (cec_has_log_addr(dev->cec_tx_adap[i], dest))
+			return true;
+	}
+	return false;
+}
+
+static void vivid_cec_pin_adap_events(struct cec_adapter *adap, ktime_t ts,
+				      const struct cec_msg *msg, bool nacked)
+{
+	unsigned int len = nacked ? 1 : msg->len;
+	unsigned int i;
+	bool bit;
+
+	if (adap == NULL)
+		return;
+
+	/*
+	 * Suffix ULL on constant 10 makes the expression
+	 * CEC_TIM_START_BIT_TOTAL + 10ULL * len * CEC_TIM_DATA_BIT_TOTAL
+	 * to be evaluated using 64-bit unsigned arithmetic (u64), which
+	 * is what ktime_sub_us expects as second argument.
+	 */
+	ts = ktime_sub_us(ts, CEC_TIM_START_BIT_TOTAL +
+			       10ULL * len * CEC_TIM_DATA_BIT_TOTAL);
+	cec_queue_pin_cec_event(adap, false, false, ts);
+	ts = ktime_add_us(ts, CEC_TIM_START_BIT_LOW);
+	cec_queue_pin_cec_event(adap, true, false, ts);
+	ts = ktime_add_us(ts, CEC_TIM_START_BIT_HIGH);
+
+	for (i = 0; i < 10 * len; i++) {
+		switch (i % 10) {
+		case 0 ... 7:
+			bit = msg->msg[i / 10] & (0x80 >> (i % 10));
+			break;
+		case 8: /* EOM */
+			bit = i / 10 == msg->len - 1;
+			break;
+		case 9: /* ACK */
+			bit = cec_msg_is_broadcast(msg) ^ nacked;
+			break;
+		}
+		cec_queue_pin_cec_event(adap, false, false, ts);
+		if (bit)
+			ts = ktime_add_us(ts, CEC_TIM_DATA_BIT_1_LOW);
+		else
+			ts = ktime_add_us(ts, CEC_TIM_DATA_BIT_0_LOW);
+		cec_queue_pin_cec_event(adap, true, false, ts);
+		if (bit)
+			ts = ktime_add_us(ts, CEC_TIM_DATA_BIT_1_HIGH);
+		else
+			ts = ktime_add_us(ts, CEC_TIM_DATA_BIT_0_HIGH);
+	}
+}
+
+static void vivid_cec_pin_events(struct vivid_dev *dev,
+				 const struct cec_msg *msg, bool nacked)
+{
+	ktime_t ts = ktime_get();
+	unsigned int i;
+
+	vivid_cec_pin_adap_events(dev->cec_rx_adap, ts, msg, nacked);
+	for (i = 0; i < MAX_OUTPUTS; i++)
+		vivid_cec_pin_adap_events(dev->cec_tx_adap[i], ts, msg, nacked);
+}
+
+static void vivid_cec_xfer_done_worker(struct work_struct *work)
+{
+	struct vivid_cec_work *cw =
+		container_of(work, struct vivid_cec_work, work.work);
+	struct vivid_dev *dev = cw->dev;
+	struct cec_adapter *adap = cw->adap;
+	u8 dest = cec_msg_destination(&cw->msg);
+	bool valid_dest;
+	unsigned int i;
+
+	valid_dest = cec_msg_is_broadcast(&cw->msg);
+	if (!valid_dest)
+		valid_dest = vivid_cec_find_dest_adap(dev, adap, dest);
+
+	cw->tx_status = valid_dest ? CEC_TX_STATUS_OK : CEC_TX_STATUS_NACK;
+	spin_lock(&dev->cec_slock);
+	dev->cec_xfer_time_jiffies = 0;
+	dev->cec_xfer_start_jiffies = 0;
+	list_del(&cw->list);
+	spin_unlock(&dev->cec_slock);
+	vivid_cec_pin_events(dev, &cw->msg, !valid_dest);
+	cec_transmit_attempt_done(cw->adap, cw->tx_status);
+
+	/* Broadcast message */
+	if (adap != dev->cec_rx_adap)
+		cec_received_msg(dev->cec_rx_adap, &cw->msg);
+	for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++)
+		if (adap != dev->cec_tx_adap[i])
+			cec_received_msg(dev->cec_tx_adap[i], &cw->msg);
+	kfree(cw);
+}
+
+static void vivid_cec_xfer_try_worker(struct work_struct *work)
+{
+	struct vivid_cec_work *cw =
+		container_of(work, struct vivid_cec_work, work.work);
+	struct vivid_dev *dev = cw->dev;
+
+	spin_lock(&dev->cec_slock);
+	if (dev->cec_xfer_time_jiffies) {
+		list_del(&cw->list);
+		spin_unlock(&dev->cec_slock);
+		cec_transmit_attempt_done(cw->adap, CEC_TX_STATUS_ARB_LOST);
+		kfree(cw);
+	} else {
+		INIT_DELAYED_WORK(&cw->work, vivid_cec_xfer_done_worker);
+		dev->cec_xfer_start_jiffies = jiffies;
+		dev->cec_xfer_time_jiffies = usecs_to_jiffies(cw->usecs);
+		spin_unlock(&dev->cec_slock);
+		schedule_delayed_work(&cw->work, dev->cec_xfer_time_jiffies);
+	}
+}
+
+static int vivid_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	adap->cec_pin_is_high = true;
+	return 0;
+}
+
+static int vivid_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+	return 0;
+}
+
+/*
+ * One data bit takes 2400 us, each byte needs 10 bits so that's 24000 us
+ * per byte.
+ */
+#define USECS_PER_BYTE 24000
+
+static int vivid_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				   u32 signal_free_time, struct cec_msg *msg)
+{
+	struct vivid_dev *dev = cec_get_drvdata(adap);
+	struct vivid_cec_work *cw = kzalloc(sizeof(*cw), GFP_KERNEL);
+	long delta_jiffies = 0;
+
+	if (cw == NULL)
+		return -ENOMEM;
+	cw->dev = dev;
+	cw->adap = adap;
+	cw->usecs = CEC_FREE_TIME_TO_USEC(signal_free_time) +
+		    msg->len * USECS_PER_BYTE;
+	cw->msg = *msg;
+
+	spin_lock(&dev->cec_slock);
+	list_add(&cw->list, &dev->cec_work_list);
+	if (dev->cec_xfer_time_jiffies == 0) {
+		INIT_DELAYED_WORK(&cw->work, vivid_cec_xfer_done_worker);
+		dev->cec_xfer_start_jiffies = jiffies;
+		dev->cec_xfer_time_jiffies = usecs_to_jiffies(cw->usecs);
+		delta_jiffies = dev->cec_xfer_time_jiffies;
+	} else {
+		INIT_DELAYED_WORK(&cw->work, vivid_cec_xfer_try_worker);
+		delta_jiffies = dev->cec_xfer_start_jiffies +
+			dev->cec_xfer_time_jiffies - jiffies;
+	}
+	spin_unlock(&dev->cec_slock);
+	schedule_delayed_work(&cw->work, delta_jiffies < 0 ? 0 : delta_jiffies);
+	return 0;
+}
+
+static int vivid_received(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	struct vivid_dev *dev = cec_get_drvdata(adap);
+	struct cec_msg reply;
+	u8 dest = cec_msg_destination(msg);
+	u8 disp_ctl;
+	char osd[14];
+
+	if (cec_msg_is_broadcast(msg))
+		dest = adap->log_addrs.log_addr[0];
+	cec_msg_init(&reply, dest, cec_msg_initiator(msg));
+
+	switch (cec_msg_opcode(msg)) {
+	case CEC_MSG_SET_OSD_STRING:
+		if (!cec_is_sink(adap))
+			return -ENOMSG;
+		cec_ops_set_osd_string(msg, &disp_ctl, osd);
+		switch (disp_ctl) {
+		case CEC_OP_DISP_CTL_DEFAULT:
+			strscpy(dev->osd, osd, sizeof(dev->osd));
+			dev->osd_jiffies = jiffies;
+			break;
+		case CEC_OP_DISP_CTL_UNTIL_CLEARED:
+			strscpy(dev->osd, osd, sizeof(dev->osd));
+			dev->osd_jiffies = 0;
+			break;
+		case CEC_OP_DISP_CTL_CLEAR:
+			dev->osd[0] = 0;
+			dev->osd_jiffies = 0;
+			break;
+		default:
+			cec_msg_feature_abort(&reply, cec_msg_opcode(msg),
+					      CEC_OP_ABORT_INVALID_OP);
+			cec_transmit_msg(adap, &reply, false);
+			break;
+		}
+		break;
+	default:
+		return -ENOMSG;
+	}
+	return 0;
+}
+
+static const struct cec_adap_ops vivid_cec_adap_ops = {
+	.adap_enable = vivid_cec_adap_enable,
+	.adap_log_addr = vivid_cec_adap_log_addr,
+	.adap_transmit = vivid_cec_adap_transmit,
+	.received = vivid_received,
+};
+
+struct cec_adapter *vivid_cec_alloc_adap(struct vivid_dev *dev,
+					 unsigned int idx,
+					 bool is_source)
+{
+	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_MONITOR_ALL | CEC_CAP_MONITOR_PIN;
+	char name[32];
+
+	snprintf(name, sizeof(name), "vivid-%03d-vid-%s%d",
+		 dev->inst, is_source ? "out" : "cap", idx);
+	return cec_allocate_adapter(&vivid_cec_adap_ops, dev,
+		name, caps, 1);
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-cec.h b/drivers/media/test-drivers/vivid/vivid-cec.h
new file mode 100644
index 000000000000..7524ed48a914
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-cec.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-cec.h - A Virtual Video Test Driver, cec emulation
+ *
+ * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifdef CONFIG_VIDEO_VIVID_CEC
+struct cec_adapter *vivid_cec_alloc_adap(struct vivid_dev *dev,
+					 unsigned int idx,
+					 bool is_source);
+void vivid_cec_bus_free_work(struct vivid_dev *dev);
+
+#else
+
+static inline void vivid_cec_bus_free_work(struct vivid_dev *dev)
+{
+}
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-core.c b/drivers/media/test-drivers/vivid/vivid-core.c
new file mode 100644
index 000000000000..6c740e3e6999
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-core.c
@@ -0,0 +1,2006 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-core.c - A Virtual Video Test Driver, core initialization
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/font.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-dv-timings.h>
+#include <media/videobuf2-vmalloc.h>
+#include <media/videobuf2-dma-contig.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
+
+#include "vivid-core.h"
+#include "vivid-vid-common.h"
+#include "vivid-vid-cap.h"
+#include "vivid-vid-out.h"
+#include "vivid-radio-common.h"
+#include "vivid-radio-rx.h"
+#include "vivid-radio-tx.h"
+#include "vivid-sdr-cap.h"
+#include "vivid-vbi-cap.h"
+#include "vivid-vbi-out.h"
+#include "vivid-osd.h"
+#include "vivid-cec.h"
+#include "vivid-ctrls.h"
+#include "vivid-meta-cap.h"
+#include "vivid-meta-out.h"
+#include "vivid-touch-cap.h"
+
+#define VIVID_MODULE_NAME "vivid"
+
+/* The maximum number of vivid devices */
+#define VIVID_MAX_DEVS CONFIG_VIDEO_VIVID_MAX_DEVS
+
+MODULE_DESCRIPTION("Virtual Video Test Driver");
+MODULE_AUTHOR("Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+static unsigned n_devs = 1;
+module_param(n_devs, uint, 0444);
+MODULE_PARM_DESC(n_devs, " number of driver instances to create");
+
+static int vid_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(vid_cap_nr, int, NULL, 0444);
+MODULE_PARM_DESC(vid_cap_nr, " videoX start number, -1 is autodetect");
+
+static int vid_out_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(vid_out_nr, int, NULL, 0444);
+MODULE_PARM_DESC(vid_out_nr, " videoX start number, -1 is autodetect");
+
+static int vbi_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(vbi_cap_nr, int, NULL, 0444);
+MODULE_PARM_DESC(vbi_cap_nr, " vbiX start number, -1 is autodetect");
+
+static int vbi_out_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(vbi_out_nr, int, NULL, 0444);
+MODULE_PARM_DESC(vbi_out_nr, " vbiX start number, -1 is autodetect");
+
+static int sdr_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(sdr_cap_nr, int, NULL, 0444);
+MODULE_PARM_DESC(sdr_cap_nr, " swradioX start number, -1 is autodetect");
+
+static int radio_rx_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(radio_rx_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_rx_nr, " radioX start number, -1 is autodetect");
+
+static int radio_tx_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(radio_tx_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_tx_nr, " radioX start number, -1 is autodetect");
+
+static int meta_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(meta_cap_nr, int, NULL, 0444);
+MODULE_PARM_DESC(meta_cap_nr, " videoX start number, -1 is autodetect");
+
+static int meta_out_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(meta_out_nr, int, NULL, 0444);
+MODULE_PARM_DESC(meta_out_nr, " videoX start number, -1 is autodetect");
+
+static int touch_cap_nr[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(touch_cap_nr, int, NULL, 0444);
+MODULE_PARM_DESC(touch_cap_nr, " v4l-touchX start number, -1 is autodetect");
+
+static int ccs_cap_mode[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(ccs_cap_mode, int, NULL, 0444);
+MODULE_PARM_DESC(ccs_cap_mode, " capture crop/compose/scale mode:\n"
+			   "\t\t    bit 0=crop, 1=compose, 2=scale,\n"
+			   "\t\t    -1=user-controlled (default)");
+
+static int ccs_out_mode[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = -1 };
+module_param_array(ccs_out_mode, int, NULL, 0444);
+MODULE_PARM_DESC(ccs_out_mode, " output crop/compose/scale mode:\n"
+			   "\t\t    bit 0=crop, 1=compose, 2=scale,\n"
+			   "\t\t    -1=user-controlled (default)");
+
+static unsigned multiplanar[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 1 };
+module_param_array(multiplanar, uint, NULL, 0444);
+MODULE_PARM_DESC(multiplanar, " 1 (default) creates a single planar device, 2 creates a multiplanar device.");
+
+/*
+ * Default: video + vbi-cap (raw and sliced) + radio rx + radio tx + sdr +
+ * vbi-out + vid-out + meta-cap
+ */
+static unsigned int node_types[VIVID_MAX_DEVS] = {
+	[0 ... (VIVID_MAX_DEVS - 1)] = 0xe1d3d
+};
+module_param_array(node_types, uint, NULL, 0444);
+MODULE_PARM_DESC(node_types, " node types, default is 0xe1d3d. Bitmask with the following meaning:\n"
+			     "\t\t    bit 0: Video Capture node\n"
+			     "\t\t    bit 2-3: VBI Capture node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both\n"
+			     "\t\t    bit 4: Radio Receiver node\n"
+			     "\t\t    bit 5: Software Defined Radio Receiver node\n"
+			     "\t\t    bit 8: Video Output node\n"
+			     "\t\t    bit 10-11: VBI Output node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both\n"
+			     "\t\t    bit 12: Radio Transmitter node\n"
+			     "\t\t    bit 16: Framebuffer for testing overlays\n"
+			     "\t\t    bit 17: Metadata Capture node\n"
+			     "\t\t    bit 18: Metadata Output node\n"
+			     "\t\t    bit 19: Touch Capture node\n");
+
+/* Default: 4 inputs */
+static unsigned num_inputs[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 4 };
+module_param_array(num_inputs, uint, NULL, 0444);
+MODULE_PARM_DESC(num_inputs, " number of inputs, default is 4");
+
+/* Default: input 0 = WEBCAM, 1 = TV, 2 = SVID, 3 = HDMI */
+static unsigned input_types[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0xe4 };
+module_param_array(input_types, uint, NULL, 0444);
+MODULE_PARM_DESC(input_types, " input types, default is 0xe4. Two bits per input,\n"
+			      "\t\t    bits 0-1 == input 0, bits 31-30 == input 15.\n"
+			      "\t\t    Type 0 == webcam, 1 == TV, 2 == S-Video, 3 == HDMI");
+
+/* Default: 2 outputs */
+static unsigned num_outputs[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 2 };
+module_param_array(num_outputs, uint, NULL, 0444);
+MODULE_PARM_DESC(num_outputs, " number of outputs, default is 2");
+
+/* Default: output 0 = SVID, 1 = HDMI */
+static unsigned output_types[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 2 };
+module_param_array(output_types, uint, NULL, 0444);
+MODULE_PARM_DESC(output_types, " output types, default is 0x02. One bit per output,\n"
+			      "\t\t    bit 0 == output 0, bit 15 == output 15.\n"
+			      "\t\t    Type 0 == S-Video, 1 == HDMI");
+
+unsigned vivid_debug;
+module_param(vivid_debug, uint, 0644);
+MODULE_PARM_DESC(vivid_debug, " activates debug info");
+
+static bool no_error_inj;
+module_param(no_error_inj, bool, 0444);
+MODULE_PARM_DESC(no_error_inj, " if set disable the error injecting controls");
+
+static unsigned int allocators[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0 };
+module_param_array(allocators, uint, NULL, 0444);
+MODULE_PARM_DESC(allocators, " memory allocator selection, default is 0.\n"
+			     "\t\t    0 == vmalloc\n"
+			     "\t\t    1 == dma-contig");
+
+static struct vivid_dev *vivid_devs[VIVID_MAX_DEVS];
+
+const struct v4l2_rect vivid_min_rect = {
+	0, 0, MIN_WIDTH, MIN_HEIGHT
+};
+
+const struct v4l2_rect vivid_max_rect = {
+	0, 0, MAX_WIDTH * MAX_ZOOM, MAX_HEIGHT * MAX_ZOOM
+};
+
+static const u8 vivid_hdmi_edid[256] = {
+	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
+	0x31, 0xd8, 0x34, 0x12, 0x00, 0x00, 0x00, 0x00,
+	0x22, 0x1a, 0x01, 0x03, 0x80, 0x60, 0x36, 0x78,
+	0x0f, 0xee, 0x91, 0xa3, 0x54, 0x4c, 0x99, 0x26,
+	0x0f, 0x50, 0x54, 0x2f, 0xcf, 0x00, 0x31, 0x59,
+	0x45, 0x59, 0x81, 0x80, 0x81, 0x40, 0x90, 0x40,
+	0x95, 0x00, 0xa9, 0x40, 0xb3, 0x00, 0x08, 0xe8,
+	0x00, 0x30, 0xf2, 0x70, 0x5a, 0x80, 0xb0, 0x58,
+	0x8a, 0x00, 0xc0, 0x1c, 0x32, 0x00, 0x00, 0x1e,
+	0x00, 0x00, 0x00, 0xfd, 0x00, 0x18, 0x55, 0x18,
+	0x87, 0x3c, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20,
+	0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x76,
+	0x69, 0x76, 0x69, 0x64, 0x0a, 0x20, 0x20, 0x20,
+	0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0x10,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x7b,
+
+	0x02, 0x03, 0x3f, 0xf0, 0x51, 0x61, 0x60, 0x5f,
+	0x5e, 0x5d, 0x10, 0x1f, 0x04, 0x13, 0x22, 0x21,
+	0x20, 0x05, 0x14, 0x02, 0x11, 0x01, 0x23, 0x09,
+	0x07, 0x07, 0x83, 0x01, 0x00, 0x00, 0x6d, 0x03,
+	0x0c, 0x00, 0x10, 0x00, 0x00, 0x3c, 0x21, 0x00,
+	0x60, 0x01, 0x02, 0x03, 0x67, 0xd8, 0x5d, 0xc4,
+	0x01, 0x78, 0x00, 0x00, 0xe2, 0x00, 0xea, 0xe3,
+	0x05, 0x00, 0x00, 0xe3, 0x06, 0x01, 0x00, 0x4d,
+	0xd0, 0x00, 0xa0, 0xf0, 0x70, 0x3e, 0x80, 0x30,
+	0x20, 0x35, 0x00, 0xc0, 0x1c, 0x32, 0x00, 0x00,
+	0x1e, 0x1a, 0x36, 0x80, 0xa0, 0x70, 0x38, 0x1f,
+	0x40, 0x30, 0x20, 0x35, 0x00, 0xc0, 0x1c, 0x32,
+	0x00, 0x00, 0x1a, 0x1a, 0x1d, 0x00, 0x80, 0x51,
+	0xd0, 0x1c, 0x20, 0x40, 0x80, 0x35, 0x00, 0xc0,
+	0x1c, 0x32, 0x00, 0x00, 0x1c, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63,
+};
+
+static int vidioc_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *cap)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	strscpy(cap->driver, "vivid", sizeof(cap->driver));
+	strscpy(cap->card, "vivid", sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info),
+			"platform:%s", dev->v4l2_dev.name);
+
+	cap->capabilities = dev->vid_cap_caps | dev->vid_out_caps |
+		dev->vbi_cap_caps | dev->vbi_out_caps |
+		dev->radio_rx_caps | dev->radio_tx_caps |
+		dev->sdr_cap_caps | dev->meta_cap_caps |
+		dev->meta_out_caps | dev->touch_cap_caps |
+		V4L2_CAP_DEVICE_CAPS;
+	return 0;
+}
+
+static int vidioc_s_hw_freq_seek(struct file *file, void *fh, const struct v4l2_hw_freq_seek *a)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_RADIO)
+		return vivid_radio_rx_s_hw_freq_seek(file, fh, a);
+	return -ENOTTY;
+}
+
+static int vidioc_enum_freq_bands(struct file *file, void *fh, struct v4l2_frequency_band *band)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_RADIO)
+		return vivid_radio_rx_enum_freq_bands(file, fh, band);
+	if (vdev->vfl_type == VFL_TYPE_SDR)
+		return vivid_sdr_enum_freq_bands(file, fh, band);
+	return -ENOTTY;
+}
+
+static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_RADIO)
+		return vivid_radio_rx_g_tuner(file, fh, vt);
+	if (vdev->vfl_type == VFL_TYPE_SDR)
+		return vivid_sdr_g_tuner(file, fh, vt);
+	return vivid_video_g_tuner(file, fh, vt);
+}
+
+static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_RADIO)
+		return vivid_radio_rx_s_tuner(file, fh, vt);
+	if (vdev->vfl_type == VFL_TYPE_SDR)
+		return vivid_sdr_s_tuner(file, fh, vt);
+	return vivid_video_s_tuner(file, fh, vt);
+}
+
+static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_RADIO)
+		return vivid_radio_g_frequency(file,
+			vdev->vfl_dir == VFL_DIR_RX ?
+			&dev->radio_rx_freq : &dev->radio_tx_freq, vf);
+	if (vdev->vfl_type == VFL_TYPE_SDR)
+		return vivid_sdr_g_frequency(file, fh, vf);
+	return vivid_video_g_frequency(file, fh, vf);
+}
+
+static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_RADIO)
+		return vivid_radio_s_frequency(file,
+			vdev->vfl_dir == VFL_DIR_RX ?
+			&dev->radio_rx_freq : &dev->radio_tx_freq, vf);
+	if (vdev->vfl_type == VFL_TYPE_SDR)
+		return vivid_sdr_s_frequency(file, fh, vf);
+	return vivid_video_s_frequency(file, fh, vf);
+}
+
+static int vidioc_overlay(struct file *file, void *fh, unsigned i)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_overlay(file, fh, i);
+	return vivid_vid_out_overlay(file, fh, i);
+}
+
+static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *a)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_g_fbuf(file, fh, a);
+	return vivid_vid_out_g_fbuf(file, fh, a);
+}
+
+static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *a)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_s_fbuf(file, fh, a);
+	return vivid_vid_out_s_fbuf(file, fh, a);
+}
+
+static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id id)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_s_std(file, fh, id);
+	return vivid_vid_out_s_std(file, fh, id);
+}
+
+static int vidioc_s_dv_timings(struct file *file, void *fh, struct v4l2_dv_timings *timings)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_s_dv_timings(file, fh, timings);
+	return vivid_vid_out_s_dv_timings(file, fh, timings);
+}
+
+static int vidioc_g_pixelaspect(struct file *file, void *fh,
+				int type, struct v4l2_fract *f)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_g_pixelaspect(file, fh, type, f);
+	return vivid_vid_out_g_pixelaspect(file, fh, type, f);
+}
+
+static int vidioc_g_selection(struct file *file, void *fh,
+			      struct v4l2_selection *sel)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_g_selection(file, fh, sel);
+	return vivid_vid_out_g_selection(file, fh, sel);
+}
+
+static int vidioc_s_selection(struct file *file, void *fh,
+			      struct v4l2_selection *sel)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_s_selection(file, fh, sel);
+	return vivid_vid_out_s_selection(file, fh, sel);
+}
+
+static int vidioc_g_parm(struct file *file, void *fh,
+			  struct v4l2_streamparm *parm)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_g_parm_tch(file, fh, parm);
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_g_parm(file, fh, parm);
+	return vivid_vid_out_g_parm(file, fh, parm);
+}
+
+static int vidioc_s_parm(struct file *file, void *fh,
+			  struct v4l2_streamparm *parm)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_vid_cap_s_parm(file, fh, parm);
+	return -ENOTTY;
+}
+
+static int vidioc_log_status(struct file *file, void *fh)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+
+	v4l2_ctrl_log_status(file, fh);
+	if (vdev->vfl_dir == VFL_DIR_RX && vdev->vfl_type == VFL_TYPE_VIDEO)
+		tpg_log_status(&dev->tpg);
+	return 0;
+}
+
+static ssize_t vivid_radio_read(struct file *file, char __user *buf,
+			 size_t size, loff_t *offset)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_TX)
+		return -EINVAL;
+	return vivid_radio_rx_read(file, buf, size, offset);
+}
+
+static ssize_t vivid_radio_write(struct file *file, const char __user *buf,
+			  size_t size, loff_t *offset)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return -EINVAL;
+	return vivid_radio_tx_write(file, buf, size, offset);
+}
+
+static __poll_t vivid_radio_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX)
+		return vivid_radio_rx_poll(file, wait);
+	return vivid_radio_tx_poll(file, wait);
+}
+
+static int vivid_enum_input(struct file *file, void *priv,
+			    struct v4l2_input *inp)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_enum_input_tch(file, priv, inp);
+	return vidioc_enum_input(file, priv, inp);
+}
+
+static int vivid_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_g_input_tch(file, priv, i);
+	return vidioc_g_input(file, priv, i);
+}
+
+static int vivid_s_input(struct file *file, void *priv, unsigned int i)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_s_input_tch(file, priv, i);
+	return vidioc_s_input(file, priv, i);
+}
+
+static int vivid_enum_fmt_cap(struct file *file, void  *priv,
+			      struct v4l2_fmtdesc *f)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_enum_fmt_tch(file, priv, f);
+	return vivid_enum_fmt_vid(file, priv, f);
+}
+
+static int vivid_g_fmt_cap(struct file *file, void *priv,
+			   struct v4l2_format *f)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_g_fmt_tch(file, priv, f);
+	return vidioc_g_fmt_vid_cap(file, priv, f);
+}
+
+static int vivid_try_fmt_cap(struct file *file, void *priv,
+			     struct v4l2_format *f)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_g_fmt_tch(file, priv, f);
+	return vidioc_try_fmt_vid_cap(file, priv, f);
+}
+
+static int vivid_s_fmt_cap(struct file *file, void *priv,
+			   struct v4l2_format *f)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_g_fmt_tch(file, priv, f);
+	return vidioc_s_fmt_vid_cap(file, priv, f);
+}
+
+static int vivid_g_fmt_cap_mplane(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_g_fmt_tch_mplane(file, priv, f);
+	return vidioc_g_fmt_vid_cap_mplane(file, priv, f);
+}
+
+static int vivid_try_fmt_cap_mplane(struct file *file, void *priv,
+				    struct v4l2_format *f)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_g_fmt_tch_mplane(file, priv, f);
+	return vidioc_try_fmt_vid_cap_mplane(file, priv, f);
+}
+
+static int vivid_s_fmt_cap_mplane(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_type == VFL_TYPE_TOUCH)
+		return vivid_g_fmt_tch_mplane(file, priv, f);
+	return vidioc_s_fmt_vid_cap_mplane(file, priv, f);
+}
+
+static bool vivid_is_in_use(struct video_device *vdev)
+{
+	unsigned long flags;
+	bool res;
+
+	spin_lock_irqsave(&vdev->fh_lock, flags);
+	res = !list_empty(&vdev->fh_list);
+	spin_unlock_irqrestore(&vdev->fh_lock, flags);
+	return res;
+}
+
+static bool vivid_is_last_user(struct vivid_dev *dev)
+{
+	unsigned uses = vivid_is_in_use(&dev->vid_cap_dev) +
+			vivid_is_in_use(&dev->vid_out_dev) +
+			vivid_is_in_use(&dev->vbi_cap_dev) +
+			vivid_is_in_use(&dev->vbi_out_dev) +
+			vivid_is_in_use(&dev->sdr_cap_dev) +
+			vivid_is_in_use(&dev->radio_rx_dev) +
+			vivid_is_in_use(&dev->radio_tx_dev) +
+			vivid_is_in_use(&dev->meta_cap_dev) +
+			vivid_is_in_use(&dev->meta_out_dev) +
+			vivid_is_in_use(&dev->touch_cap_dev);
+
+	return uses == 1;
+}
+
+static int vivid_fop_release(struct file *file)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+
+	mutex_lock(&dev->mutex);
+	if (!no_error_inj && v4l2_fh_is_singular_file(file) &&
+	    !video_is_registered(vdev) && vivid_is_last_user(dev)) {
+		/*
+		 * I am the last user of this driver, and a disconnect
+		 * was forced (since this video_device is unregistered),
+		 * so re-register all video_device's again.
+		 */
+		v4l2_info(&dev->v4l2_dev, "reconnect\n");
+		set_bit(V4L2_FL_REGISTERED, &dev->vid_cap_dev.flags);
+		set_bit(V4L2_FL_REGISTERED, &dev->vid_out_dev.flags);
+		set_bit(V4L2_FL_REGISTERED, &dev->vbi_cap_dev.flags);
+		set_bit(V4L2_FL_REGISTERED, &dev->vbi_out_dev.flags);
+		set_bit(V4L2_FL_REGISTERED, &dev->sdr_cap_dev.flags);
+		set_bit(V4L2_FL_REGISTERED, &dev->radio_rx_dev.flags);
+		set_bit(V4L2_FL_REGISTERED, &dev->radio_tx_dev.flags);
+		set_bit(V4L2_FL_REGISTERED, &dev->meta_cap_dev.flags);
+		set_bit(V4L2_FL_REGISTERED, &dev->meta_out_dev.flags);
+		set_bit(V4L2_FL_REGISTERED, &dev->touch_cap_dev.flags);
+	}
+	mutex_unlock(&dev->mutex);
+	if (file->private_data == dev->overlay_cap_owner)
+		dev->overlay_cap_owner = NULL;
+	if (file->private_data == dev->radio_rx_rds_owner) {
+		dev->radio_rx_rds_last_block = 0;
+		dev->radio_rx_rds_owner = NULL;
+	}
+	if (file->private_data == dev->radio_tx_rds_owner) {
+		dev->radio_tx_rds_last_block = 0;
+		dev->radio_tx_rds_owner = NULL;
+	}
+	if (vdev->queue)
+		return vb2_fop_release(file);
+	return v4l2_fh_release(file);
+}
+
+static const struct v4l2_file_operations vivid_fops = {
+	.owner		= THIS_MODULE,
+	.open           = v4l2_fh_open,
+	.release        = vivid_fop_release,
+	.read           = vb2_fop_read,
+	.write          = vb2_fop_write,
+	.poll		= vb2_fop_poll,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap           = vb2_fop_mmap,
+};
+
+static const struct v4l2_file_operations vivid_radio_fops = {
+	.owner		= THIS_MODULE,
+	.open           = v4l2_fh_open,
+	.release        = vivid_fop_release,
+	.read           = vivid_radio_read,
+	.write          = vivid_radio_write,
+	.poll		= vivid_radio_poll,
+	.unlocked_ioctl = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops vivid_ioctl_ops = {
+	.vidioc_querycap		= vidioc_querycap,
+
+	.vidioc_enum_fmt_vid_cap	= vivid_enum_fmt_cap,
+	.vidioc_g_fmt_vid_cap		= vivid_g_fmt_cap,
+	.vidioc_try_fmt_vid_cap		= vivid_try_fmt_cap,
+	.vidioc_s_fmt_vid_cap		= vivid_s_fmt_cap,
+	.vidioc_g_fmt_vid_cap_mplane	= vivid_g_fmt_cap_mplane,
+	.vidioc_try_fmt_vid_cap_mplane	= vivid_try_fmt_cap_mplane,
+	.vidioc_s_fmt_vid_cap_mplane	= vivid_s_fmt_cap_mplane,
+
+	.vidioc_enum_fmt_vid_out	= vivid_enum_fmt_vid,
+	.vidioc_g_fmt_vid_out		= vidioc_g_fmt_vid_out,
+	.vidioc_try_fmt_vid_out		= vidioc_try_fmt_vid_out,
+	.vidioc_s_fmt_vid_out		= vidioc_s_fmt_vid_out,
+	.vidioc_g_fmt_vid_out_mplane	= vidioc_g_fmt_vid_out_mplane,
+	.vidioc_try_fmt_vid_out_mplane	= vidioc_try_fmt_vid_out_mplane,
+	.vidioc_s_fmt_vid_out_mplane	= vidioc_s_fmt_vid_out_mplane,
+
+	.vidioc_g_selection		= vidioc_g_selection,
+	.vidioc_s_selection		= vidioc_s_selection,
+	.vidioc_g_pixelaspect		= vidioc_g_pixelaspect,
+
+	.vidioc_g_fmt_vbi_cap		= vidioc_g_fmt_vbi_cap,
+	.vidioc_try_fmt_vbi_cap		= vidioc_g_fmt_vbi_cap,
+	.vidioc_s_fmt_vbi_cap		= vidioc_s_fmt_vbi_cap,
+
+	.vidioc_g_fmt_sliced_vbi_cap    = vidioc_g_fmt_sliced_vbi_cap,
+	.vidioc_try_fmt_sliced_vbi_cap  = vidioc_try_fmt_sliced_vbi_cap,
+	.vidioc_s_fmt_sliced_vbi_cap    = vidioc_s_fmt_sliced_vbi_cap,
+	.vidioc_g_sliced_vbi_cap	= vidioc_g_sliced_vbi_cap,
+
+	.vidioc_g_fmt_vbi_out		= vidioc_g_fmt_vbi_out,
+	.vidioc_try_fmt_vbi_out		= vidioc_g_fmt_vbi_out,
+	.vidioc_s_fmt_vbi_out		= vidioc_s_fmt_vbi_out,
+
+	.vidioc_g_fmt_sliced_vbi_out    = vidioc_g_fmt_sliced_vbi_out,
+	.vidioc_try_fmt_sliced_vbi_out  = vidioc_try_fmt_sliced_vbi_out,
+	.vidioc_s_fmt_sliced_vbi_out    = vidioc_s_fmt_sliced_vbi_out,
+
+	.vidioc_enum_fmt_sdr_cap	= vidioc_enum_fmt_sdr_cap,
+	.vidioc_g_fmt_sdr_cap		= vidioc_g_fmt_sdr_cap,
+	.vidioc_try_fmt_sdr_cap		= vidioc_try_fmt_sdr_cap,
+	.vidioc_s_fmt_sdr_cap		= vidioc_s_fmt_sdr_cap,
+
+	.vidioc_overlay			= vidioc_overlay,
+	.vidioc_enum_framesizes		= vidioc_enum_framesizes,
+	.vidioc_enum_frameintervals	= vidioc_enum_frameintervals,
+	.vidioc_g_parm			= vidioc_g_parm,
+	.vidioc_s_parm			= vidioc_s_parm,
+
+	.vidioc_enum_fmt_vid_overlay	= vidioc_enum_fmt_vid_overlay,
+	.vidioc_g_fmt_vid_overlay	= vidioc_g_fmt_vid_overlay,
+	.vidioc_try_fmt_vid_overlay	= vidioc_try_fmt_vid_overlay,
+	.vidioc_s_fmt_vid_overlay	= vidioc_s_fmt_vid_overlay,
+	.vidioc_g_fmt_vid_out_overlay	= vidioc_g_fmt_vid_out_overlay,
+	.vidioc_try_fmt_vid_out_overlay	= vidioc_try_fmt_vid_out_overlay,
+	.vidioc_s_fmt_vid_out_overlay	= vidioc_s_fmt_vid_out_overlay,
+	.vidioc_g_fbuf			= vidioc_g_fbuf,
+	.vidioc_s_fbuf			= vidioc_s_fbuf,
+
+	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
+	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
+	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
+	.vidioc_querybuf		= vb2_ioctl_querybuf,
+	.vidioc_qbuf			= vb2_ioctl_qbuf,
+	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
+	.vidioc_expbuf			= vb2_ioctl_expbuf,
+	.vidioc_streamon		= vb2_ioctl_streamon,
+	.vidioc_streamoff		= vb2_ioctl_streamoff,
+
+	.vidioc_enum_input		= vivid_enum_input,
+	.vidioc_g_input			= vivid_g_input,
+	.vidioc_s_input			= vivid_s_input,
+	.vidioc_s_audio			= vidioc_s_audio,
+	.vidioc_g_audio			= vidioc_g_audio,
+	.vidioc_enumaudio		= vidioc_enumaudio,
+	.vidioc_s_frequency		= vidioc_s_frequency,
+	.vidioc_g_frequency		= vidioc_g_frequency,
+	.vidioc_s_tuner			= vidioc_s_tuner,
+	.vidioc_g_tuner			= vidioc_g_tuner,
+	.vidioc_s_modulator		= vidioc_s_modulator,
+	.vidioc_g_modulator		= vidioc_g_modulator,
+	.vidioc_s_hw_freq_seek		= vidioc_s_hw_freq_seek,
+	.vidioc_enum_freq_bands		= vidioc_enum_freq_bands,
+
+	.vidioc_enum_output		= vidioc_enum_output,
+	.vidioc_g_output		= vidioc_g_output,
+	.vidioc_s_output		= vidioc_s_output,
+	.vidioc_s_audout		= vidioc_s_audout,
+	.vidioc_g_audout		= vidioc_g_audout,
+	.vidioc_enumaudout		= vidioc_enumaudout,
+
+	.vidioc_querystd		= vidioc_querystd,
+	.vidioc_g_std			= vidioc_g_std,
+	.vidioc_s_std			= vidioc_s_std,
+	.vidioc_s_dv_timings		= vidioc_s_dv_timings,
+	.vidioc_g_dv_timings		= vidioc_g_dv_timings,
+	.vidioc_query_dv_timings	= vidioc_query_dv_timings,
+	.vidioc_enum_dv_timings		= vidioc_enum_dv_timings,
+	.vidioc_dv_timings_cap		= vidioc_dv_timings_cap,
+	.vidioc_g_edid			= vidioc_g_edid,
+	.vidioc_s_edid			= vidioc_s_edid,
+
+	.vidioc_log_status		= vidioc_log_status,
+	.vidioc_subscribe_event		= vidioc_subscribe_event,
+	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
+
+	.vidioc_enum_fmt_meta_cap	= vidioc_enum_fmt_meta_cap,
+	.vidioc_g_fmt_meta_cap		= vidioc_g_fmt_meta_cap,
+	.vidioc_s_fmt_meta_cap		= vidioc_g_fmt_meta_cap,
+	.vidioc_try_fmt_meta_cap	= vidioc_g_fmt_meta_cap,
+
+	.vidioc_enum_fmt_meta_out       = vidioc_enum_fmt_meta_out,
+	.vidioc_g_fmt_meta_out          = vidioc_g_fmt_meta_out,
+	.vidioc_s_fmt_meta_out          = vidioc_g_fmt_meta_out,
+	.vidioc_try_fmt_meta_out        = vidioc_g_fmt_meta_out,
+};
+
+/* -----------------------------------------------------------------
+	Initialization and module stuff
+   ------------------------------------------------------------------*/
+
+static void vivid_dev_release(struct v4l2_device *v4l2_dev)
+{
+	struct vivid_dev *dev = container_of(v4l2_dev, struct vivid_dev, v4l2_dev);
+
+	vivid_free_controls(dev);
+	v4l2_device_unregister(&dev->v4l2_dev);
+#ifdef CONFIG_MEDIA_CONTROLLER
+	media_device_cleanup(&dev->mdev);
+#endif
+	vfree(dev->scaled_line);
+	vfree(dev->blended_line);
+	vfree(dev->edid);
+	vfree(dev->bitmap_cap);
+	vfree(dev->bitmap_out);
+	tpg_free(&dev->tpg);
+	kfree(dev->query_dv_timings_qmenu);
+	kfree(dev->query_dv_timings_qmenu_strings);
+	kfree(dev);
+}
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+static int vivid_req_validate(struct media_request *req)
+{
+	struct vivid_dev *dev = container_of(req->mdev, struct vivid_dev, mdev);
+
+	if (dev->req_validate_error) {
+		dev->req_validate_error = false;
+		return -EINVAL;
+	}
+	return vb2_request_validate(req);
+}
+
+static const struct media_device_ops vivid_media_ops = {
+	.req_validate = vivid_req_validate,
+	.req_queue = vb2_request_queue,
+};
+#endif
+
+static int vivid_create_queue(struct vivid_dev *dev,
+			      struct vb2_queue *q,
+			      u32 buf_type,
+			      unsigned int min_buffers_needed,
+			      const struct vb2_ops *ops)
+{
+	if (buf_type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->multiplanar)
+		buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+	else if (buf_type == V4L2_BUF_TYPE_VIDEO_OUTPUT && dev->multiplanar)
+		buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+	else if (buf_type == V4L2_BUF_TYPE_VBI_CAPTURE && !dev->has_raw_vbi_cap)
+		buf_type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
+	else if (buf_type == V4L2_BUF_TYPE_VBI_OUTPUT && !dev->has_raw_vbi_out)
+		buf_type = V4L2_BUF_TYPE_SLICED_VBI_OUTPUT;
+
+	q->type = buf_type;
+	q->io_modes = VB2_MMAP | VB2_DMABUF;
+	q->io_modes |= V4L2_TYPE_IS_OUTPUT(buf_type) ?  VB2_WRITE : VB2_READ;
+	if (allocators[dev->inst] != 1)
+		q->io_modes |= VB2_USERPTR;
+	q->drv_priv = dev;
+	q->buf_struct_size = sizeof(struct vivid_buffer);
+	q->ops = ops;
+	q->mem_ops = allocators[dev->inst] == 1 ? &vb2_dma_contig_memops :
+						  &vb2_vmalloc_memops;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->min_buffers_needed = min_buffers_needed;
+	q->lock = &dev->mutex;
+	q->dev = dev->v4l2_dev.dev;
+	q->supports_requests = true;
+
+	return vb2_queue_init(q);
+}
+
+static int vivid_create_instance(struct platform_device *pdev, int inst)
+{
+	static const struct v4l2_dv_timings def_dv_timings =
+					V4L2_DV_BT_CEA_1280X720P60;
+	unsigned in_type_counter[4] = { 0, 0, 0, 0 };
+	unsigned out_type_counter[4] = { 0, 0, 0, 0 };
+	int ccs_cap = ccs_cap_mode[inst];
+	int ccs_out = ccs_out_mode[inst];
+	bool has_tuner;
+	bool has_modulator;
+	struct vivid_dev *dev;
+	struct video_device *vfd;
+	unsigned node_type = node_types[inst];
+	v4l2_std_id tvnorms_cap = 0, tvnorms_out = 0;
+	int ret;
+	int i;
+#ifdef CONFIG_VIDEO_VIVID_CEC
+	unsigned int cec_tx_bus_cnt = 0;
+#endif
+
+	/* allocate main vivid state structure */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->inst = inst;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	dev->v4l2_dev.mdev = &dev->mdev;
+
+	/* Initialize media device */
+	strscpy(dev->mdev.model, VIVID_MODULE_NAME, sizeof(dev->mdev.model));
+	snprintf(dev->mdev.bus_info, sizeof(dev->mdev.bus_info),
+		 "platform:%s-%03d", VIVID_MODULE_NAME, inst);
+	dev->mdev.dev = &pdev->dev;
+	media_device_init(&dev->mdev);
+	dev->mdev.ops = &vivid_media_ops;
+#endif
+
+	/* register v4l2_device */
+	snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name),
+			"%s-%03d", VIVID_MODULE_NAME, inst);
+	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
+	if (ret) {
+		kfree(dev);
+		return ret;
+	}
+	dev->v4l2_dev.release = vivid_dev_release;
+
+	/* start detecting feature set */
+
+	/* do we use single- or multi-planar? */
+	dev->multiplanar = multiplanar[inst] > 1;
+	v4l2_info(&dev->v4l2_dev, "using %splanar format API\n",
+			dev->multiplanar ? "multi" : "single ");
+
+	/* how many inputs do we have and of what type? */
+	dev->num_inputs = num_inputs[inst];
+	if (dev->num_inputs < 1)
+		dev->num_inputs = 1;
+	if (dev->num_inputs >= MAX_INPUTS)
+		dev->num_inputs = MAX_INPUTS;
+	for (i = 0; i < dev->num_inputs; i++) {
+		dev->input_type[i] = (input_types[inst] >> (i * 2)) & 0x3;
+		dev->input_name_counter[i] = in_type_counter[dev->input_type[i]]++;
+	}
+	dev->has_audio_inputs = in_type_counter[TV] && in_type_counter[SVID];
+	if (in_type_counter[HDMI] == 16) {
+		/* The CEC physical address only allows for max 15 inputs */
+		in_type_counter[HDMI]--;
+		dev->num_inputs--;
+	}
+	dev->num_hdmi_inputs = in_type_counter[HDMI];
+
+	/* how many outputs do we have and of what type? */
+	dev->num_outputs = num_outputs[inst];
+	if (dev->num_outputs < 1)
+		dev->num_outputs = 1;
+	if (dev->num_outputs >= MAX_OUTPUTS)
+		dev->num_outputs = MAX_OUTPUTS;
+	for (i = 0; i < dev->num_outputs; i++) {
+		dev->output_type[i] = ((output_types[inst] >> i) & 1) ? HDMI : SVID;
+		dev->output_name_counter[i] = out_type_counter[dev->output_type[i]]++;
+		dev->display_present[i] = true;
+	}
+	dev->has_audio_outputs = out_type_counter[SVID];
+	if (out_type_counter[HDMI] == 16) {
+		/*
+		 * The CEC physical address only allows for max 15 inputs,
+		 * so outputs are also limited to 15 to allow for easy
+		 * CEC output to input mapping.
+		 */
+		out_type_counter[HDMI]--;
+		dev->num_outputs--;
+	}
+	dev->num_hdmi_outputs = out_type_counter[HDMI];
+
+	/* do we create a video capture device? */
+	dev->has_vid_cap = node_type & 0x0001;
+
+	/* do we create a vbi capture device? */
+	if (in_type_counter[TV] || in_type_counter[SVID]) {
+		dev->has_raw_vbi_cap = node_type & 0x0004;
+		dev->has_sliced_vbi_cap = node_type & 0x0008;
+		dev->has_vbi_cap = dev->has_raw_vbi_cap | dev->has_sliced_vbi_cap;
+	}
+
+	/* do we create a meta capture device */
+	dev->has_meta_cap = node_type & 0x20000;
+
+	/* sanity checks */
+	if ((in_type_counter[WEBCAM] || in_type_counter[HDMI]) &&
+	    !dev->has_vid_cap && !dev->has_meta_cap) {
+		v4l2_warn(&dev->v4l2_dev,
+			  "Webcam or HDMI input without video or metadata nodes\n");
+		kfree(dev);
+		return -EINVAL;
+	}
+	if ((in_type_counter[TV] || in_type_counter[SVID]) &&
+	    !dev->has_vid_cap && !dev->has_vbi_cap && !dev->has_meta_cap) {
+		v4l2_warn(&dev->v4l2_dev,
+			  "TV or S-Video input without video, VBI or metadata nodes\n");
+		kfree(dev);
+		return -EINVAL;
+	}
+
+	/* do we create a video output device? */
+	dev->has_vid_out = node_type & 0x0100;
+
+	/* do we create a vbi output device? */
+	if (out_type_counter[SVID]) {
+		dev->has_raw_vbi_out = node_type & 0x0400;
+		dev->has_sliced_vbi_out = node_type & 0x0800;
+		dev->has_vbi_out = dev->has_raw_vbi_out | dev->has_sliced_vbi_out;
+	}
+
+	/* do we create a metadata output device */
+	dev->has_meta_out = node_type & 0x40000;
+
+	/* sanity checks */
+	if (out_type_counter[SVID] &&
+	    !dev->has_vid_out && !dev->has_vbi_out && !dev->has_meta_out) {
+		v4l2_warn(&dev->v4l2_dev,
+			  "S-Video output without video, VBI or metadata nodes\n");
+		kfree(dev);
+		return -EINVAL;
+	}
+	if (out_type_counter[HDMI] && !dev->has_vid_out && !dev->has_meta_out) {
+		v4l2_warn(&dev->v4l2_dev,
+			  "HDMI output without video or metadata nodes\n");
+		kfree(dev);
+		return -EINVAL;
+	}
+
+	/* do we create a radio receiver device? */
+	dev->has_radio_rx = node_type & 0x0010;
+
+	/* do we create a radio transmitter device? */
+	dev->has_radio_tx = node_type & 0x1000;
+
+	/* do we create a software defined radio capture device? */
+	dev->has_sdr_cap = node_type & 0x0020;
+
+	/* do we have a TV tuner? */
+	dev->has_tv_tuner = in_type_counter[TV];
+
+	/* do we have a tuner? */
+	has_tuner = ((dev->has_vid_cap || dev->has_vbi_cap) && in_type_counter[TV]) ||
+		    dev->has_radio_rx || dev->has_sdr_cap;
+
+	/* do we have a modulator? */
+	has_modulator = dev->has_radio_tx;
+
+	if (dev->has_vid_cap)
+		/* do we have a framebuffer for overlay testing? */
+		dev->has_fb = node_type & 0x10000;
+
+	/* can we do crop/compose/scaling while capturing? */
+	if (no_error_inj && ccs_cap == -1)
+		ccs_cap = 7;
+
+	/* if ccs_cap == -1, then the user can select it using controls */
+	if (ccs_cap != -1) {
+		dev->has_crop_cap = ccs_cap & 1;
+		dev->has_compose_cap = ccs_cap & 2;
+		dev->has_scaler_cap = ccs_cap & 4;
+		v4l2_info(&dev->v4l2_dev, "Capture Crop: %c Compose: %c Scaler: %c\n",
+			dev->has_crop_cap ? 'Y' : 'N',
+			dev->has_compose_cap ? 'Y' : 'N',
+			dev->has_scaler_cap ? 'Y' : 'N');
+	}
+
+	/* can we do crop/compose/scaling with video output? */
+	if (no_error_inj && ccs_out == -1)
+		ccs_out = 7;
+
+	/* if ccs_out == -1, then the user can select it using controls */
+	if (ccs_out != -1) {
+		dev->has_crop_out = ccs_out & 1;
+		dev->has_compose_out = ccs_out & 2;
+		dev->has_scaler_out = ccs_out & 4;
+		v4l2_info(&dev->v4l2_dev, "Output Crop: %c Compose: %c Scaler: %c\n",
+			dev->has_crop_out ? 'Y' : 'N',
+			dev->has_compose_out ? 'Y' : 'N',
+			dev->has_scaler_out ? 'Y' : 'N');
+	}
+
+	/* do we create a touch capture device */
+	dev->has_touch_cap = node_type & 0x80000;
+
+	/* end detecting feature set */
+
+	if (dev->has_vid_cap) {
+		/* set up the capabilities of the video capture device */
+		dev->vid_cap_caps = dev->multiplanar ?
+			V4L2_CAP_VIDEO_CAPTURE_MPLANE :
+			V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY;
+		dev->vid_cap_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
+		if (dev->has_audio_inputs)
+			dev->vid_cap_caps |= V4L2_CAP_AUDIO;
+		if (dev->has_tv_tuner)
+			dev->vid_cap_caps |= V4L2_CAP_TUNER;
+	}
+	if (dev->has_vid_out) {
+		/* set up the capabilities of the video output device */
+		dev->vid_out_caps = dev->multiplanar ?
+			V4L2_CAP_VIDEO_OUTPUT_MPLANE :
+			V4L2_CAP_VIDEO_OUTPUT;
+		if (dev->has_fb)
+			dev->vid_out_caps |= V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
+		dev->vid_out_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
+		if (dev->has_audio_outputs)
+			dev->vid_out_caps |= V4L2_CAP_AUDIO;
+	}
+	if (dev->has_vbi_cap) {
+		/* set up the capabilities of the vbi capture device */
+		dev->vbi_cap_caps = (dev->has_raw_vbi_cap ? V4L2_CAP_VBI_CAPTURE : 0) |
+				    (dev->has_sliced_vbi_cap ? V4L2_CAP_SLICED_VBI_CAPTURE : 0);
+		dev->vbi_cap_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
+		if (dev->has_audio_inputs)
+			dev->vbi_cap_caps |= V4L2_CAP_AUDIO;
+		if (dev->has_tv_tuner)
+			dev->vbi_cap_caps |= V4L2_CAP_TUNER;
+	}
+	if (dev->has_vbi_out) {
+		/* set up the capabilities of the vbi output device */
+		dev->vbi_out_caps = (dev->has_raw_vbi_out ? V4L2_CAP_VBI_OUTPUT : 0) |
+				    (dev->has_sliced_vbi_out ? V4L2_CAP_SLICED_VBI_OUTPUT : 0);
+		dev->vbi_out_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
+		if (dev->has_audio_outputs)
+			dev->vbi_out_caps |= V4L2_CAP_AUDIO;
+	}
+	if (dev->has_sdr_cap) {
+		/* set up the capabilities of the sdr capture device */
+		dev->sdr_cap_caps = V4L2_CAP_SDR_CAPTURE | V4L2_CAP_TUNER;
+		dev->sdr_cap_caps |= V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
+	}
+	/* set up the capabilities of the radio receiver device */
+	if (dev->has_radio_rx)
+		dev->radio_rx_caps = V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE |
+				     V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_TUNER |
+				     V4L2_CAP_READWRITE;
+	/* set up the capabilities of the radio transmitter device */
+	if (dev->has_radio_tx)
+		dev->radio_tx_caps = V4L2_CAP_RDS_OUTPUT | V4L2_CAP_MODULATOR |
+				     V4L2_CAP_READWRITE;
+
+	/* set up the capabilities of meta capture device */
+	if (dev->has_meta_cap) {
+		dev->meta_cap_caps = V4L2_CAP_META_CAPTURE |
+				     V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
+		if (dev->has_audio_inputs)
+			dev->meta_cap_caps |= V4L2_CAP_AUDIO;
+		if (dev->has_tv_tuner)
+			dev->meta_cap_caps |= V4L2_CAP_TUNER;
+	}
+	/* set up the capabilities of meta output device */
+	if (dev->has_meta_out) {
+		dev->meta_out_caps = V4L2_CAP_META_OUTPUT |
+				     V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
+		if (dev->has_audio_outputs)
+			dev->meta_out_caps |= V4L2_CAP_AUDIO;
+	}
+	/* set up the capabilities of the touch capture device */
+	if (dev->has_touch_cap) {
+		dev->touch_cap_caps = V4L2_CAP_TOUCH | V4L2_CAP_STREAMING |
+				      V4L2_CAP_READWRITE;
+		dev->touch_cap_caps |= dev->multiplanar ?
+			V4L2_CAP_VIDEO_CAPTURE_MPLANE : V4L2_CAP_VIDEO_CAPTURE;
+	}
+
+	ret = -ENOMEM;
+	/* initialize the test pattern generator */
+	tpg_init(&dev->tpg, 640, 360);
+	if (tpg_alloc(&dev->tpg, MAX_ZOOM * MAX_WIDTH))
+		goto free_dev;
+	dev->scaled_line = vzalloc(array_size(MAX_WIDTH, MAX_ZOOM));
+	if (!dev->scaled_line)
+		goto free_dev;
+	dev->blended_line = vzalloc(array_size(MAX_WIDTH, MAX_ZOOM));
+	if (!dev->blended_line)
+		goto free_dev;
+
+	/* load the edid */
+	dev->edid = vmalloc(256 * 128);
+	if (!dev->edid)
+		goto free_dev;
+
+	while (v4l2_dv_timings_presets[dev->query_dv_timings_size].bt.width)
+		dev->query_dv_timings_size++;
+
+	/*
+	 * Create a char pointer array that points to the names of all the
+	 * preset timings
+	 */
+	dev->query_dv_timings_qmenu = kmalloc_array(dev->query_dv_timings_size,
+						    sizeof(char *), GFP_KERNEL);
+	/*
+	 * Create a string array containing the names of all the preset
+	 * timings. Each name is max 31 chars long (+ terminating 0).
+	 */
+	dev->query_dv_timings_qmenu_strings =
+		kmalloc_array(dev->query_dv_timings_size, 32, GFP_KERNEL);
+
+	if (!dev->query_dv_timings_qmenu ||
+	    !dev->query_dv_timings_qmenu_strings)
+		goto free_dev;
+
+	for (i = 0; i < dev->query_dv_timings_size; i++) {
+		const struct v4l2_bt_timings *bt = &v4l2_dv_timings_presets[i].bt;
+		char *p = dev->query_dv_timings_qmenu_strings + i * 32;
+		u32 htot, vtot;
+
+		dev->query_dv_timings_qmenu[i] = p;
+
+		htot = V4L2_DV_BT_FRAME_WIDTH(bt);
+		vtot = V4L2_DV_BT_FRAME_HEIGHT(bt);
+		snprintf(p, 32, "%ux%u%s%u",
+			bt->width, bt->height, bt->interlaced ? "i" : "p",
+			(u32)bt->pixelclock / (htot * vtot));
+	}
+
+	/* disable invalid ioctls based on the feature set */
+	if (!dev->has_audio_inputs) {
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_AUDIO);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_AUDIO);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_ENUMAUDIO);
+		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_S_AUDIO);
+		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_G_AUDIO);
+		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_ENUMAUDIO);
+		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_S_AUDIO);
+		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_G_AUDIO);
+		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_ENUMAUDIO);
+	}
+	if (!dev->has_audio_outputs) {
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_AUDOUT);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_AUDOUT);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUMAUDOUT);
+		v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_S_AUDOUT);
+		v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_G_AUDOUT);
+		v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_ENUMAUDOUT);
+		v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_S_AUDOUT);
+		v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_G_AUDOUT);
+		v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_ENUMAUDOUT);
+	}
+	if (!in_type_counter[TV] && !in_type_counter[SVID]) {
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_STD);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_STD);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_ENUMSTD);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_QUERYSTD);
+	}
+	if (!out_type_counter[SVID]) {
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_STD);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_STD);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUMSTD);
+	}
+	if (!has_tuner && !has_modulator) {
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_FREQUENCY);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_FREQUENCY);
+		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_S_FREQUENCY);
+		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_G_FREQUENCY);
+		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_S_FREQUENCY);
+		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_G_FREQUENCY);
+	}
+	if (!has_tuner) {
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_TUNER);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_TUNER);
+		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_S_TUNER);
+		v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_G_TUNER);
+		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_S_TUNER);
+		v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_G_TUNER);
+	}
+	if (in_type_counter[HDMI] == 0) {
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_EDID);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_EDID);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_DV_TIMINGS_CAP);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_G_DV_TIMINGS);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_DV_TIMINGS);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_ENUM_DV_TIMINGS);
+		v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_QUERY_DV_TIMINGS);
+	}
+	if (out_type_counter[HDMI] == 0) {
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_EDID);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_DV_TIMINGS_CAP);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_DV_TIMINGS);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_DV_TIMINGS);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUM_DV_TIMINGS);
+	}
+	if (!dev->has_fb) {
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_FBUF);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_FBUF);
+		v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_OVERLAY);
+	}
+	v4l2_disable_ioctl(&dev->vid_cap_dev, VIDIOC_S_HW_FREQ_SEEK);
+	v4l2_disable_ioctl(&dev->vbi_cap_dev, VIDIOC_S_HW_FREQ_SEEK);
+	v4l2_disable_ioctl(&dev->sdr_cap_dev, VIDIOC_S_HW_FREQ_SEEK);
+	v4l2_disable_ioctl(&dev->meta_cap_dev, VIDIOC_S_HW_FREQ_SEEK);
+	v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_S_FREQUENCY);
+	v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_G_FREQUENCY);
+	v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUM_FRAMESIZES);
+	v4l2_disable_ioctl(&dev->vid_out_dev, VIDIOC_ENUM_FRAMEINTERVALS);
+	v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_S_FREQUENCY);
+	v4l2_disable_ioctl(&dev->vbi_out_dev, VIDIOC_G_FREQUENCY);
+	v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_S_FREQUENCY);
+	v4l2_disable_ioctl(&dev->meta_out_dev, VIDIOC_G_FREQUENCY);
+	v4l2_disable_ioctl(&dev->touch_cap_dev, VIDIOC_S_PARM);
+	v4l2_disable_ioctl(&dev->touch_cap_dev, VIDIOC_ENUM_FRAMESIZES);
+	v4l2_disable_ioctl(&dev->touch_cap_dev, VIDIOC_ENUM_FRAMEINTERVALS);
+
+	/* configure internal data */
+	dev->fmt_cap = &vivid_formats[0];
+	dev->fmt_out = &vivid_formats[0];
+	if (!dev->multiplanar)
+		vivid_formats[0].data_offset[0] = 0;
+	dev->webcam_size_idx = 1;
+	dev->webcam_ival_idx = 3;
+	tpg_s_fourcc(&dev->tpg, dev->fmt_cap->fourcc);
+	dev->std_out = V4L2_STD_PAL;
+	if (dev->input_type[0] == TV || dev->input_type[0] == SVID)
+		tvnorms_cap = V4L2_STD_ALL;
+	if (dev->output_type[0] == SVID)
+		tvnorms_out = V4L2_STD_ALL;
+	for (i = 0; i < MAX_INPUTS; i++) {
+		dev->dv_timings_cap[i] = def_dv_timings;
+		dev->std_cap[i] = V4L2_STD_PAL;
+	}
+	dev->dv_timings_out = def_dv_timings;
+	dev->tv_freq = 2804 /* 175.25 * 16 */;
+	dev->tv_audmode = V4L2_TUNER_MODE_STEREO;
+	dev->tv_field_cap = V4L2_FIELD_INTERLACED;
+	dev->tv_field_out = V4L2_FIELD_INTERLACED;
+	dev->radio_rx_freq = 95000 * 16;
+	dev->radio_rx_audmode = V4L2_TUNER_MODE_STEREO;
+	if (dev->has_radio_tx) {
+		dev->radio_tx_freq = 95500 * 16;
+		dev->radio_rds_loop = false;
+	}
+	dev->radio_tx_subchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_RDS;
+	dev->sdr_adc_freq = 300000;
+	dev->sdr_fm_freq = 50000000;
+	dev->sdr_pixelformat = V4L2_SDR_FMT_CU8;
+	dev->sdr_buffersize = SDR_CAP_SAMPLES_PER_BUF * 2;
+
+	dev->edid_max_blocks = dev->edid_blocks = 2;
+	memcpy(dev->edid, vivid_hdmi_edid, sizeof(vivid_hdmi_edid));
+	dev->radio_rds_init_time = ktime_get();
+
+	/* create all controls */
+	ret = vivid_create_controls(dev, ccs_cap == -1, ccs_out == -1, no_error_inj,
+			in_type_counter[TV] || in_type_counter[SVID] ||
+			out_type_counter[SVID],
+			in_type_counter[HDMI] || out_type_counter[HDMI]);
+	if (ret)
+		goto unreg_dev;
+
+	/* enable/disable interface specific controls */
+	if (dev->num_outputs && dev->output_type[0] != HDMI)
+		v4l2_ctrl_activate(dev->ctrl_display_present, false);
+	if (dev->num_inputs && dev->input_type[0] != HDMI) {
+		v4l2_ctrl_activate(dev->ctrl_dv_timings_signal_mode, false);
+		v4l2_ctrl_activate(dev->ctrl_dv_timings, false);
+	} else if (dev->num_inputs && dev->input_type[0] == HDMI) {
+		v4l2_ctrl_activate(dev->ctrl_std_signal_mode, false);
+		v4l2_ctrl_activate(dev->ctrl_standard, false);
+	}
+
+	/*
+	 * update the capture and output formats to do a proper initial
+	 * configuration.
+	 */
+	vivid_update_format_cap(dev, false);
+	vivid_update_format_out(dev);
+
+	/* initialize overlay */
+	dev->fb_cap.fmt.width = dev->src_rect.width;
+	dev->fb_cap.fmt.height = dev->src_rect.height;
+	dev->fb_cap.fmt.pixelformat = dev->fmt_cap->fourcc;
+	dev->fb_cap.fmt.bytesperline = dev->src_rect.width * tpg_g_twopixelsize(&dev->tpg, 0) / 2;
+	dev->fb_cap.fmt.sizeimage = dev->src_rect.height * dev->fb_cap.fmt.bytesperline;
+
+	/* update touch configuration */
+	dev->timeperframe_tch_cap.numerator = 1;
+	dev->timeperframe_tch_cap.denominator = 10;
+	vivid_set_touch(dev, 0);
+
+	/* initialize locks */
+	spin_lock_init(&dev->slock);
+	mutex_init(&dev->mutex);
+
+	/* init dma queues */
+	INIT_LIST_HEAD(&dev->vid_cap_active);
+	INIT_LIST_HEAD(&dev->vid_out_active);
+	INIT_LIST_HEAD(&dev->vbi_cap_active);
+	INIT_LIST_HEAD(&dev->vbi_out_active);
+	INIT_LIST_HEAD(&dev->sdr_cap_active);
+	INIT_LIST_HEAD(&dev->meta_cap_active);
+	INIT_LIST_HEAD(&dev->meta_out_active);
+	INIT_LIST_HEAD(&dev->touch_cap_active);
+
+	INIT_LIST_HEAD(&dev->cec_work_list);
+	spin_lock_init(&dev->cec_slock);
+	/*
+	 * Same as create_singlethread_workqueue, but now I can use the
+	 * string formatting of alloc_ordered_workqueue.
+	 */
+	dev->cec_workqueue =
+		alloc_ordered_workqueue("vivid-%03d-cec", WQ_MEM_RECLAIM, inst);
+	if (!dev->cec_workqueue) {
+		ret = -ENOMEM;
+		goto unreg_dev;
+	}
+
+	if (allocators[inst] == 1)
+		dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+
+	/* start creating the vb2 queues */
+	if (dev->has_vid_cap) {
+		/* initialize vid_cap queue */
+		ret = vivid_create_queue(dev, &dev->vb_vid_cap_q,
+					 V4L2_BUF_TYPE_VIDEO_CAPTURE, 2,
+					 &vivid_vid_cap_qops);
+		if (ret)
+			goto unreg_dev;
+	}
+
+	if (dev->has_vid_out) {
+		/* initialize vid_out queue */
+		ret = vivid_create_queue(dev, &dev->vb_vid_out_q,
+					 V4L2_BUF_TYPE_VIDEO_OUTPUT, 2,
+					 &vivid_vid_out_qops);
+		if (ret)
+			goto unreg_dev;
+	}
+
+	if (dev->has_vbi_cap) {
+		/* initialize vbi_cap queue */
+		ret = vivid_create_queue(dev, &dev->vb_vbi_cap_q,
+					 V4L2_BUF_TYPE_VBI_CAPTURE, 2,
+					 &vivid_vbi_cap_qops);
+		if (ret)
+			goto unreg_dev;
+	}
+
+	if (dev->has_vbi_out) {
+		/* initialize vbi_out queue */
+		ret = vivid_create_queue(dev, &dev->vb_vbi_out_q,
+					 V4L2_BUF_TYPE_VBI_OUTPUT, 2,
+					 &vivid_vbi_out_qops);
+		if (ret)
+			goto unreg_dev;
+	}
+
+	if (dev->has_sdr_cap) {
+		/* initialize sdr_cap queue */
+		ret = vivid_create_queue(dev, &dev->vb_sdr_cap_q,
+					 V4L2_BUF_TYPE_SDR_CAPTURE, 8,
+					 &vivid_sdr_cap_qops);
+		if (ret)
+			goto unreg_dev;
+	}
+
+	if (dev->has_meta_cap) {
+		/* initialize meta_cap queue */
+		ret = vivid_create_queue(dev, &dev->vb_meta_cap_q,
+					 V4L2_BUF_TYPE_META_CAPTURE, 2,
+					 &vivid_meta_cap_qops);
+		if (ret)
+			goto unreg_dev;
+	}
+
+	if (dev->has_meta_out) {
+		/* initialize meta_out queue */
+		ret = vivid_create_queue(dev, &dev->vb_meta_out_q,
+					 V4L2_BUF_TYPE_META_OUTPUT, 1,
+					 &vivid_meta_out_qops);
+		if (ret)
+			goto unreg_dev;
+	}
+
+	if (dev->has_touch_cap) {
+		/* initialize touch_cap queue */
+		ret = vivid_create_queue(dev, &dev->vb_touch_cap_q,
+					 V4L2_BUF_TYPE_VIDEO_CAPTURE, 1,
+					 &vivid_touch_cap_qops);
+		if (ret)
+			goto unreg_dev;
+	}
+
+	if (dev->has_fb) {
+		/* Create framebuffer for testing capture/output overlay */
+		ret = vivid_fb_init(dev);
+		if (ret)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev, "Framebuffer device registered as fb%d\n",
+			  dev->fb_info.node);
+	}
+
+#ifdef CONFIG_VIDEO_VIVID_CEC
+	if (dev->has_vid_cap && in_type_counter[HDMI]) {
+		struct cec_adapter *adap;
+
+		adap = vivid_cec_alloc_adap(dev, 0, false);
+		ret = PTR_ERR_OR_ZERO(adap);
+		if (ret < 0)
+			goto unreg_dev;
+		dev->cec_rx_adap = adap;
+	}
+
+	if (dev->has_vid_out) {
+		for (i = 0; i < dev->num_outputs; i++) {
+			struct cec_adapter *adap;
+
+			if (dev->output_type[i] != HDMI)
+				continue;
+
+			dev->cec_output2bus_map[i] = cec_tx_bus_cnt;
+			adap = vivid_cec_alloc_adap(dev, cec_tx_bus_cnt, true);
+			ret = PTR_ERR_OR_ZERO(adap);
+			if (ret < 0) {
+				for (i = 0; i < dev->num_outputs; i++)
+					cec_delete_adapter(dev->cec_tx_adap[i]);
+				goto unreg_dev;
+			}
+
+			dev->cec_tx_adap[cec_tx_bus_cnt] = adap;
+			cec_tx_bus_cnt++;
+		}
+	}
+#endif
+
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vid_cap);
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vid_out);
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vbi_cap);
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_vbi_out);
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_radio_rx);
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_radio_tx);
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_sdr_cap);
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_meta_cap);
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_meta_out);
+	v4l2_ctrl_handler_setup(&dev->ctrl_hdl_touch_cap);
+
+	/* finally start creating the device nodes */
+	if (dev->has_vid_cap) {
+		vfd = &dev->vid_cap_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-vid-cap", inst);
+		vfd->fops = &vivid_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->vid_cap_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->queue = &dev->vb_vid_cap_q;
+		vfd->tvnorms = tvnorms_cap;
+
+		/*
+		 * Provide a mutex to v4l2 core. It will be used to protect
+		 * all fops and v4l2 ioctls.
+		 */
+		vfd->lock = &dev->mutex;
+		video_set_drvdata(vfd, dev);
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+		dev->vid_cap_pad.flags = MEDIA_PAD_FL_SINK;
+		ret = media_entity_pads_init(&vfd->entity, 1, &dev->vid_cap_pad);
+		if (ret)
+			goto unreg_dev;
+#endif
+
+#ifdef CONFIG_VIDEO_VIVID_CEC
+		if (in_type_counter[HDMI]) {
+			ret = cec_register_adapter(dev->cec_rx_adap, &pdev->dev);
+			if (ret < 0) {
+				cec_delete_adapter(dev->cec_rx_adap);
+				dev->cec_rx_adap = NULL;
+				goto unreg_dev;
+			}
+			cec_s_phys_addr(dev->cec_rx_adap, 0, false);
+			v4l2_info(&dev->v4l2_dev, "CEC adapter %s registered for HDMI input 0\n",
+				  dev_name(&dev->cec_rx_adap->devnode.dev));
+		}
+#endif
+
+		ret = video_register_device(vfd, VFL_TYPE_VIDEO, vid_cap_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev, "V4L2 capture device registered as %s\n",
+					  video_device_node_name(vfd));
+	}
+
+	if (dev->has_vid_out) {
+		vfd = &dev->vid_out_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-vid-out", inst);
+		vfd->vfl_dir = VFL_DIR_TX;
+		vfd->fops = &vivid_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->vid_out_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->queue = &dev->vb_vid_out_q;
+		vfd->tvnorms = tvnorms_out;
+
+		/*
+		 * Provide a mutex to v4l2 core. It will be used to protect
+		 * all fops and v4l2 ioctls.
+		 */
+		vfd->lock = &dev->mutex;
+		video_set_drvdata(vfd, dev);
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+		dev->vid_out_pad.flags = MEDIA_PAD_FL_SOURCE;
+		ret = media_entity_pads_init(&vfd->entity, 1, &dev->vid_out_pad);
+		if (ret)
+			goto unreg_dev;
+#endif
+
+#ifdef CONFIG_VIDEO_VIVID_CEC
+		for (i = 0; i < cec_tx_bus_cnt; i++) {
+			ret = cec_register_adapter(dev->cec_tx_adap[i], &pdev->dev);
+			if (ret < 0) {
+				for (; i < cec_tx_bus_cnt; i++) {
+					cec_delete_adapter(dev->cec_tx_adap[i]);
+					dev->cec_tx_adap[i] = NULL;
+				}
+				goto unreg_dev;
+			}
+			v4l2_info(&dev->v4l2_dev, "CEC adapter %s registered for HDMI output %d\n",
+				  dev_name(&dev->cec_tx_adap[i]->devnode.dev), i);
+			if (i < out_type_counter[HDMI])
+				cec_s_phys_addr(dev->cec_tx_adap[i], (i + 1) << 12, false);
+			else
+				cec_s_phys_addr(dev->cec_tx_adap[i], 0x1000, false);
+		}
+#endif
+
+		ret = video_register_device(vfd, VFL_TYPE_VIDEO, vid_out_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev, "V4L2 output device registered as %s\n",
+					  video_device_node_name(vfd));
+	}
+
+	if (dev->has_vbi_cap) {
+		vfd = &dev->vbi_cap_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-vbi-cap", inst);
+		vfd->fops = &vivid_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->vbi_cap_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->queue = &dev->vb_vbi_cap_q;
+		vfd->lock = &dev->mutex;
+		vfd->tvnorms = tvnorms_cap;
+		video_set_drvdata(vfd, dev);
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+		dev->vbi_cap_pad.flags = MEDIA_PAD_FL_SINK;
+		ret = media_entity_pads_init(&vfd->entity, 1, &dev->vbi_cap_pad);
+		if (ret)
+			goto unreg_dev;
+#endif
+
+		ret = video_register_device(vfd, VFL_TYPE_VBI, vbi_cap_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev, "V4L2 capture device registered as %s, supports %s VBI\n",
+					  video_device_node_name(vfd),
+					  (dev->has_raw_vbi_cap && dev->has_sliced_vbi_cap) ?
+					  "raw and sliced" :
+					  (dev->has_raw_vbi_cap ? "raw" : "sliced"));
+	}
+
+	if (dev->has_vbi_out) {
+		vfd = &dev->vbi_out_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-vbi-out", inst);
+		vfd->vfl_dir = VFL_DIR_TX;
+		vfd->fops = &vivid_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->vbi_out_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->queue = &dev->vb_vbi_out_q;
+		vfd->lock = &dev->mutex;
+		vfd->tvnorms = tvnorms_out;
+		video_set_drvdata(vfd, dev);
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+		dev->vbi_out_pad.flags = MEDIA_PAD_FL_SOURCE;
+		ret = media_entity_pads_init(&vfd->entity, 1, &dev->vbi_out_pad);
+		if (ret)
+			goto unreg_dev;
+#endif
+
+		ret = video_register_device(vfd, VFL_TYPE_VBI, vbi_out_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev, "V4L2 output device registered as %s, supports %s VBI\n",
+					  video_device_node_name(vfd),
+					  (dev->has_raw_vbi_out && dev->has_sliced_vbi_out) ?
+					  "raw and sliced" :
+					  (dev->has_raw_vbi_out ? "raw" : "sliced"));
+	}
+
+	if (dev->has_sdr_cap) {
+		vfd = &dev->sdr_cap_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-sdr-cap", inst);
+		vfd->fops = &vivid_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->sdr_cap_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->queue = &dev->vb_sdr_cap_q;
+		vfd->lock = &dev->mutex;
+		video_set_drvdata(vfd, dev);
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+		dev->sdr_cap_pad.flags = MEDIA_PAD_FL_SINK;
+		ret = media_entity_pads_init(&vfd->entity, 1, &dev->sdr_cap_pad);
+		if (ret)
+			goto unreg_dev;
+#endif
+
+		ret = video_register_device(vfd, VFL_TYPE_SDR, sdr_cap_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev, "V4L2 capture device registered as %s\n",
+					  video_device_node_name(vfd));
+	}
+
+	if (dev->has_radio_rx) {
+		vfd = &dev->radio_rx_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-rad-rx", inst);
+		vfd->fops = &vivid_radio_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->radio_rx_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->lock = &dev->mutex;
+		video_set_drvdata(vfd, dev);
+
+		ret = video_register_device(vfd, VFL_TYPE_RADIO, radio_rx_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev, "V4L2 receiver device registered as %s\n",
+					  video_device_node_name(vfd));
+	}
+
+	if (dev->has_radio_tx) {
+		vfd = &dev->radio_tx_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-rad-tx", inst);
+		vfd->vfl_dir = VFL_DIR_TX;
+		vfd->fops = &vivid_radio_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->radio_tx_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->lock = &dev->mutex;
+		video_set_drvdata(vfd, dev);
+
+		ret = video_register_device(vfd, VFL_TYPE_RADIO, radio_tx_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev, "V4L2 transmitter device registered as %s\n",
+					  video_device_node_name(vfd));
+	}
+
+	if (dev->has_meta_cap) {
+		vfd = &dev->meta_cap_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-meta-cap", inst);
+		vfd->fops = &vivid_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->meta_cap_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->queue = &dev->vb_meta_cap_q;
+		vfd->lock = &dev->mutex;
+		vfd->tvnorms = tvnorms_cap;
+		video_set_drvdata(vfd, dev);
+#ifdef CONFIG_MEDIA_CONTROLLER
+		dev->meta_cap_pad.flags = MEDIA_PAD_FL_SINK;
+		ret = media_entity_pads_init(&vfd->entity, 1,
+					     &dev->meta_cap_pad);
+		if (ret)
+			goto unreg_dev;
+#endif
+		ret = video_register_device(vfd, VFL_TYPE_VIDEO,
+					    meta_cap_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev,
+			  "V4L2 metadata capture device registered as %s\n",
+			  video_device_node_name(vfd));
+	}
+
+	if (dev->has_meta_out) {
+		vfd = &dev->meta_out_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-meta-out", inst);
+		vfd->vfl_dir = VFL_DIR_TX;
+		vfd->fops = &vivid_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->meta_out_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->queue = &dev->vb_meta_out_q;
+		vfd->lock = &dev->mutex;
+		vfd->tvnorms = tvnorms_out;
+		video_set_drvdata(vfd, dev);
+#ifdef CONFIG_MEDIA_CONTROLLER
+		dev->meta_out_pad.flags = MEDIA_PAD_FL_SOURCE;
+		ret = media_entity_pads_init(&vfd->entity, 1,
+					     &dev->meta_out_pad);
+		if (ret)
+			goto unreg_dev;
+#endif
+		ret = video_register_device(vfd, VFL_TYPE_VIDEO,
+					    meta_out_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev,
+			  "V4L2 metadata output device registered as %s\n",
+			  video_device_node_name(vfd));
+	}
+
+	if (dev->has_touch_cap) {
+		vfd = &dev->touch_cap_dev;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "vivid-%03d-touch-cap", inst);
+		vfd->fops = &vivid_fops;
+		vfd->ioctl_ops = &vivid_ioctl_ops;
+		vfd->device_caps = dev->touch_cap_caps;
+		vfd->release = video_device_release_empty;
+		vfd->v4l2_dev = &dev->v4l2_dev;
+		vfd->queue = &dev->vb_touch_cap_q;
+		vfd->tvnorms = tvnorms_cap;
+		vfd->lock = &dev->mutex;
+		video_set_drvdata(vfd, dev);
+#ifdef CONFIG_MEDIA_CONTROLLER
+		dev->touch_cap_pad.flags = MEDIA_PAD_FL_SINK;
+		ret = media_entity_pads_init(&vfd->entity, 1,
+					     &dev->touch_cap_pad);
+		if (ret)
+			goto unreg_dev;
+#endif
+		ret = video_register_device(vfd, VFL_TYPE_TOUCH,
+					    touch_cap_nr[inst]);
+		if (ret < 0)
+			goto unreg_dev;
+		v4l2_info(&dev->v4l2_dev,
+			  "V4L2 touch capture device registered as %s\n",
+			  video_device_node_name(vfd));
+	}
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	/* Register the media device */
+	ret = media_device_register(&dev->mdev);
+	if (ret) {
+		dev_err(dev->mdev.dev,
+			"media device register failed (err=%d)\n", ret);
+		goto unreg_dev;
+	}
+#endif
+
+	/* Now that everything is fine, let's add it to device list */
+	vivid_devs[inst] = dev;
+
+	return 0;
+
+unreg_dev:
+	video_unregister_device(&dev->touch_cap_dev);
+	video_unregister_device(&dev->meta_out_dev);
+	video_unregister_device(&dev->meta_cap_dev);
+	video_unregister_device(&dev->radio_tx_dev);
+	video_unregister_device(&dev->radio_rx_dev);
+	video_unregister_device(&dev->sdr_cap_dev);
+	video_unregister_device(&dev->vbi_out_dev);
+	video_unregister_device(&dev->vbi_cap_dev);
+	video_unregister_device(&dev->vid_out_dev);
+	video_unregister_device(&dev->vid_cap_dev);
+	cec_unregister_adapter(dev->cec_rx_adap);
+	for (i = 0; i < MAX_OUTPUTS; i++)
+		cec_unregister_adapter(dev->cec_tx_adap[i]);
+	if (dev->cec_workqueue) {
+		vivid_cec_bus_free_work(dev);
+		destroy_workqueue(dev->cec_workqueue);
+	}
+free_dev:
+	v4l2_device_put(&dev->v4l2_dev);
+	return ret;
+}
+
+/* This routine allocates from 1 to n_devs virtual drivers.
+
+   The real maximum number of virtual drivers will depend on how many drivers
+   will succeed. This is limited to the maximum number of devices that
+   videodev supports, which is equal to VIDEO_NUM_DEVICES.
+ */
+static int vivid_probe(struct platform_device *pdev)
+{
+	const struct font_desc *font = find_font("VGA8x16");
+	int ret = 0, i;
+
+	if (font == NULL) {
+		pr_err("vivid: could not find font\n");
+		return -ENODEV;
+	}
+
+	tpg_set_font(font->data);
+
+	n_devs = clamp_t(unsigned, n_devs, 1, VIVID_MAX_DEVS);
+
+	for (i = 0; i < n_devs; i++) {
+		ret = vivid_create_instance(pdev, i);
+		if (ret) {
+			/* If some instantiations succeeded, keep driver */
+			if (i)
+				ret = 0;
+			break;
+		}
+	}
+
+	if (ret < 0) {
+		pr_err("vivid: error %d while loading driver\n", ret);
+		return ret;
+	}
+
+	/* n_devs will reflect the actual number of allocated devices */
+	n_devs = i;
+
+	return ret;
+}
+
+static int vivid_remove(struct platform_device *pdev)
+{
+	struct vivid_dev *dev;
+	unsigned int i, j;
+
+	for (i = 0; i < n_devs; i++) {
+		dev = vivid_devs[i];
+		if (!dev)
+			continue;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+		media_device_unregister(&dev->mdev);
+#endif
+
+		if (dev->has_vid_cap) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				video_device_node_name(&dev->vid_cap_dev));
+			video_unregister_device(&dev->vid_cap_dev);
+		}
+		if (dev->has_vid_out) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				video_device_node_name(&dev->vid_out_dev));
+			video_unregister_device(&dev->vid_out_dev);
+		}
+		if (dev->has_vbi_cap) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				video_device_node_name(&dev->vbi_cap_dev));
+			video_unregister_device(&dev->vbi_cap_dev);
+		}
+		if (dev->has_vbi_out) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				video_device_node_name(&dev->vbi_out_dev));
+			video_unregister_device(&dev->vbi_out_dev);
+		}
+		if (dev->has_sdr_cap) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				video_device_node_name(&dev->sdr_cap_dev));
+			video_unregister_device(&dev->sdr_cap_dev);
+		}
+		if (dev->has_radio_rx) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				video_device_node_name(&dev->radio_rx_dev));
+			video_unregister_device(&dev->radio_rx_dev);
+		}
+		if (dev->has_radio_tx) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				video_device_node_name(&dev->radio_tx_dev));
+			video_unregister_device(&dev->radio_tx_dev);
+		}
+		if (dev->has_fb) {
+			v4l2_info(&dev->v4l2_dev, "unregistering fb%d\n",
+				dev->fb_info.node);
+			unregister_framebuffer(&dev->fb_info);
+			vivid_fb_release_buffers(dev);
+		}
+		if (dev->has_meta_cap) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				  video_device_node_name(&dev->meta_cap_dev));
+			video_unregister_device(&dev->meta_cap_dev);
+		}
+		if (dev->has_meta_out) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				  video_device_node_name(&dev->meta_out_dev));
+			video_unregister_device(&dev->meta_out_dev);
+		}
+		if (dev->has_touch_cap) {
+			v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+				  video_device_node_name(&dev->touch_cap_dev));
+			video_unregister_device(&dev->touch_cap_dev);
+		}
+		cec_unregister_adapter(dev->cec_rx_adap);
+		for (j = 0; j < MAX_OUTPUTS; j++)
+			cec_unregister_adapter(dev->cec_tx_adap[j]);
+		if (dev->cec_workqueue) {
+			vivid_cec_bus_free_work(dev);
+			destroy_workqueue(dev->cec_workqueue);
+		}
+		v4l2_device_put(&dev->v4l2_dev);
+		vivid_devs[i] = NULL;
+	}
+	return 0;
+}
+
+static void vivid_pdev_release(struct device *dev)
+{
+}
+
+static struct platform_device vivid_pdev = {
+	.name		= "vivid",
+	.dev.release	= vivid_pdev_release,
+};
+
+static struct platform_driver vivid_pdrv = {
+	.probe		= vivid_probe,
+	.remove		= vivid_remove,
+	.driver		= {
+		.name	= "vivid",
+	},
+};
+
+static int __init vivid_init(void)
+{
+	int ret;
+
+	ret = platform_device_register(&vivid_pdev);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&vivid_pdrv);
+	if (ret)
+		platform_device_unregister(&vivid_pdev);
+
+	return ret;
+}
+
+static void __exit vivid_exit(void)
+{
+	platform_driver_unregister(&vivid_pdrv);
+	platform_device_unregister(&vivid_pdev);
+}
+
+module_init(vivid_init);
+module_exit(vivid_exit);
diff --git a/drivers/media/test-drivers/vivid/vivid-core.h b/drivers/media/test-drivers/vivid/vivid-core.h
new file mode 100644
index 000000000000..99e69b8f770f
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-core.h
@@ -0,0 +1,612 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-core.h - core datastructures
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_CORE_H_
+#define _VIVID_CORE_H_
+
+#include <linux/fb.h>
+#include <linux/workqueue.h>
+#include <media/cec.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ctrls.h>
+#include <media/tpg/v4l2-tpg.h>
+#include "vivid-rds-gen.h"
+#include "vivid-vbi-gen.h"
+
+#define dprintk(dev, level, fmt, arg...) \
+	v4l2_dbg(level, vivid_debug, &dev->v4l2_dev, fmt, ## arg)
+
+/* The maximum number of clip rectangles */
+#define MAX_CLIPS  16
+/* The maximum number of inputs */
+#define MAX_INPUTS 16
+/* The maximum number of outputs */
+#define MAX_OUTPUTS 16
+/* The maximum up or down scaling factor is 4 */
+#define MAX_ZOOM  4
+/* The maximum image width/height are set to 4K DMT */
+#define MAX_WIDTH  4096
+#define MAX_HEIGHT 2160
+/* The minimum image width/height */
+#define MIN_WIDTH  16
+#define MIN_HEIGHT 16
+/* The data_offset of plane 0 for the multiplanar formats */
+#define PLANE0_DATA_OFFSET 128
+
+/* The supported TV frequency range in MHz */
+#define MIN_TV_FREQ (44U * 16U)
+#define MAX_TV_FREQ (958U * 16U)
+
+/* The number of samples returned in every SDR buffer */
+#define SDR_CAP_SAMPLES_PER_BUF 0x4000
+
+/* used by the threads to know when to resync internal counters */
+#define JIFFIES_PER_DAY (3600U * 24U * HZ)
+#define JIFFIES_RESYNC (JIFFIES_PER_DAY * (0xf0000000U / JIFFIES_PER_DAY))
+
+extern const struct v4l2_rect vivid_min_rect;
+extern const struct v4l2_rect vivid_max_rect;
+extern unsigned vivid_debug;
+
+struct vivid_fmt {
+	u32	fourcc;          /* v4l2 format id */
+	enum	tgp_color_enc color_enc;
+	bool	can_do_overlay;
+	u8	vdownsampling[TPG_MAX_PLANES];
+	u32	alpha_mask;
+	u8	planes;
+	u8	buffers;
+	u32	data_offset[TPG_MAX_PLANES];
+	u32	bit_depth[TPG_MAX_PLANES];
+};
+
+extern struct vivid_fmt vivid_formats[];
+
+/* buffer for one video frame */
+struct vivid_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct vb2_v4l2_buffer vb;
+	struct list_head	list;
+};
+
+enum vivid_input {
+	WEBCAM,
+	TV,
+	SVID,
+	HDMI,
+};
+
+enum vivid_signal_mode {
+	CURRENT_DV_TIMINGS,
+	CURRENT_STD = CURRENT_DV_TIMINGS,
+	NO_SIGNAL,
+	NO_LOCK,
+	OUT_OF_RANGE,
+	SELECTED_DV_TIMINGS,
+	SELECTED_STD = SELECTED_DV_TIMINGS,
+	CYCLE_DV_TIMINGS,
+	CYCLE_STD = CYCLE_DV_TIMINGS,
+	CUSTOM_DV_TIMINGS,
+};
+
+enum vivid_colorspace {
+	VIVID_CS_170M,
+	VIVID_CS_709,
+	VIVID_CS_SRGB,
+	VIVID_CS_OPRGB,
+	VIVID_CS_2020,
+	VIVID_CS_DCI_P3,
+	VIVID_CS_240M,
+	VIVID_CS_SYS_M,
+	VIVID_CS_SYS_BG,
+};
+
+#define VIVID_INVALID_SIGNAL(mode) \
+	((mode) == NO_SIGNAL || (mode) == NO_LOCK || (mode) == OUT_OF_RANGE)
+
+struct vivid_cec_work {
+	struct list_head	list;
+	struct delayed_work	work;
+	struct cec_adapter	*adap;
+	struct vivid_dev	*dev;
+	unsigned int		usecs;
+	unsigned int		timeout_ms;
+	u8			tx_status;
+	struct cec_msg		msg;
+};
+
+struct vivid_dev {
+	unsigned			inst;
+	struct v4l2_device		v4l2_dev;
+#ifdef CONFIG_MEDIA_CONTROLLER
+	struct media_device		mdev;
+	struct media_pad		vid_cap_pad;
+	struct media_pad		vid_out_pad;
+	struct media_pad		vbi_cap_pad;
+	struct media_pad		vbi_out_pad;
+	struct media_pad		sdr_cap_pad;
+	struct media_pad		meta_cap_pad;
+	struct media_pad		meta_out_pad;
+	struct media_pad		touch_cap_pad;
+#endif
+	struct v4l2_ctrl_handler	ctrl_hdl_user_gen;
+	struct v4l2_ctrl_handler	ctrl_hdl_user_vid;
+	struct v4l2_ctrl_handler	ctrl_hdl_user_aud;
+	struct v4l2_ctrl_handler	ctrl_hdl_streaming;
+	struct v4l2_ctrl_handler	ctrl_hdl_sdtv_cap;
+	struct v4l2_ctrl_handler	ctrl_hdl_loop_cap;
+	struct v4l2_ctrl_handler	ctrl_hdl_fb;
+	struct video_device		vid_cap_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_vid_cap;
+	struct video_device		vid_out_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_vid_out;
+	struct video_device		vbi_cap_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_vbi_cap;
+	struct video_device		vbi_out_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_vbi_out;
+	struct video_device		radio_rx_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_radio_rx;
+	struct video_device		radio_tx_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_radio_tx;
+	struct video_device		sdr_cap_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_sdr_cap;
+	struct video_device		meta_cap_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_meta_cap;
+	struct video_device		meta_out_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_meta_out;
+	struct video_device		touch_cap_dev;
+	struct v4l2_ctrl_handler	ctrl_hdl_touch_cap;
+
+	spinlock_t			slock;
+	struct mutex			mutex;
+
+	/* capabilities */
+	u32				vid_cap_caps;
+	u32				vid_out_caps;
+	u32				vbi_cap_caps;
+	u32				vbi_out_caps;
+	u32				sdr_cap_caps;
+	u32				radio_rx_caps;
+	u32				radio_tx_caps;
+	u32				meta_cap_caps;
+	u32				meta_out_caps;
+	u32				touch_cap_caps;
+
+	/* supported features */
+	bool				multiplanar;
+	unsigned			num_inputs;
+	unsigned int			num_hdmi_inputs;
+	u8				input_type[MAX_INPUTS];
+	u8				input_name_counter[MAX_INPUTS];
+	unsigned			num_outputs;
+	unsigned int			num_hdmi_outputs;
+	u8				output_type[MAX_OUTPUTS];
+	u8				output_name_counter[MAX_OUTPUTS];
+	bool				has_audio_inputs;
+	bool				has_audio_outputs;
+	bool				has_vid_cap;
+	bool				has_vid_out;
+	bool				has_vbi_cap;
+	bool				has_raw_vbi_cap;
+	bool				has_sliced_vbi_cap;
+	bool				has_vbi_out;
+	bool				has_raw_vbi_out;
+	bool				has_sliced_vbi_out;
+	bool				has_radio_rx;
+	bool				has_radio_tx;
+	bool				has_sdr_cap;
+	bool				has_fb;
+	bool				has_meta_cap;
+	bool				has_meta_out;
+	bool				has_tv_tuner;
+	bool				has_touch_cap;
+
+	bool				can_loop_video;
+
+	/* controls */
+	struct v4l2_ctrl		*brightness;
+	struct v4l2_ctrl		*contrast;
+	struct v4l2_ctrl		*saturation;
+	struct v4l2_ctrl		*hue;
+	struct {
+		/* autogain/gain cluster */
+		struct v4l2_ctrl	*autogain;
+		struct v4l2_ctrl	*gain;
+	};
+	struct v4l2_ctrl		*volume;
+	struct v4l2_ctrl		*mute;
+	struct v4l2_ctrl		*alpha;
+	struct v4l2_ctrl		*button;
+	struct v4l2_ctrl		*boolean;
+	struct v4l2_ctrl		*int32;
+	struct v4l2_ctrl		*int64;
+	struct v4l2_ctrl		*menu;
+	struct v4l2_ctrl		*string;
+	struct v4l2_ctrl		*bitmask;
+	struct v4l2_ctrl		*int_menu;
+	struct v4l2_ctrl		*test_pattern;
+	struct v4l2_ctrl		*colorspace;
+	struct v4l2_ctrl		*rgb_range_cap;
+	struct v4l2_ctrl		*real_rgb_range_cap;
+	struct {
+		/* std_signal_mode/standard cluster */
+		struct v4l2_ctrl	*ctrl_std_signal_mode;
+		struct v4l2_ctrl	*ctrl_standard;
+	};
+	struct {
+		/* dv_timings_signal_mode/timings cluster */
+		struct v4l2_ctrl	*ctrl_dv_timings_signal_mode;
+		struct v4l2_ctrl	*ctrl_dv_timings;
+	};
+	struct v4l2_ctrl		*ctrl_display_present;
+	struct v4l2_ctrl		*ctrl_has_crop_cap;
+	struct v4l2_ctrl		*ctrl_has_compose_cap;
+	struct v4l2_ctrl		*ctrl_has_scaler_cap;
+	struct v4l2_ctrl		*ctrl_has_crop_out;
+	struct v4l2_ctrl		*ctrl_has_compose_out;
+	struct v4l2_ctrl		*ctrl_has_scaler_out;
+	struct v4l2_ctrl		*ctrl_tx_mode;
+	struct v4l2_ctrl		*ctrl_tx_rgb_range;
+	struct v4l2_ctrl		*ctrl_tx_edid_present;
+	struct v4l2_ctrl		*ctrl_tx_hotplug;
+	struct v4l2_ctrl		*ctrl_tx_rxsense;
+
+	struct v4l2_ctrl		*ctrl_rx_power_present;
+
+	struct v4l2_ctrl		*radio_tx_rds_pi;
+	struct v4l2_ctrl		*radio_tx_rds_pty;
+	struct v4l2_ctrl		*radio_tx_rds_mono_stereo;
+	struct v4l2_ctrl		*radio_tx_rds_art_head;
+	struct v4l2_ctrl		*radio_tx_rds_compressed;
+	struct v4l2_ctrl		*radio_tx_rds_dyn_pty;
+	struct v4l2_ctrl		*radio_tx_rds_ta;
+	struct v4l2_ctrl		*radio_tx_rds_tp;
+	struct v4l2_ctrl		*radio_tx_rds_ms;
+	struct v4l2_ctrl		*radio_tx_rds_psname;
+	struct v4l2_ctrl		*radio_tx_rds_radiotext;
+
+	struct v4l2_ctrl		*radio_rx_rds_pty;
+	struct v4l2_ctrl		*radio_rx_rds_ta;
+	struct v4l2_ctrl		*radio_rx_rds_tp;
+	struct v4l2_ctrl		*radio_rx_rds_ms;
+	struct v4l2_ctrl		*radio_rx_rds_psname;
+	struct v4l2_ctrl		*radio_rx_rds_radiotext;
+
+	unsigned			input_brightness[MAX_INPUTS];
+	unsigned			osd_mode;
+	unsigned			button_pressed;
+	bool				sensor_hflip;
+	bool				sensor_vflip;
+	bool				hflip;
+	bool				vflip;
+	bool				vbi_cap_interlaced;
+	bool				loop_video;
+	bool				reduced_fps;
+
+	/* Framebuffer */
+	unsigned long			video_pbase;
+	void				*video_vbase;
+	u32				video_buffer_size;
+	int				display_width;
+	int				display_height;
+	int				display_byte_stride;
+	int				bits_per_pixel;
+	int				bytes_per_pixel;
+	struct fb_info			fb_info;
+	struct fb_var_screeninfo	fb_defined;
+	struct fb_fix_screeninfo	fb_fix;
+
+	/* Error injection */
+	bool				queue_setup_error;
+	bool				buf_prepare_error;
+	bool				start_streaming_error;
+	bool				dqbuf_error;
+	bool				req_validate_error;
+	bool				seq_wrap;
+	bool				time_wrap;
+	u64				time_wrap_offset;
+	unsigned			perc_dropped_buffers;
+	enum vivid_signal_mode		std_signal_mode[MAX_INPUTS];
+	unsigned int			query_std_last[MAX_INPUTS];
+	v4l2_std_id			query_std[MAX_INPUTS];
+	enum tpg_video_aspect		std_aspect_ratio[MAX_INPUTS];
+
+	enum vivid_signal_mode		dv_timings_signal_mode[MAX_INPUTS];
+	char				**query_dv_timings_qmenu;
+	char				*query_dv_timings_qmenu_strings;
+	unsigned			query_dv_timings_size;
+	unsigned int			query_dv_timings_last[MAX_INPUTS];
+	unsigned int			query_dv_timings[MAX_INPUTS];
+	enum tpg_video_aspect		dv_timings_aspect_ratio[MAX_INPUTS];
+
+	/* Input */
+	unsigned			input;
+	v4l2_std_id			std_cap[MAX_INPUTS];
+	struct v4l2_dv_timings		dv_timings_cap[MAX_INPUTS];
+	int				dv_timings_cap_sel[MAX_INPUTS];
+	u32				service_set_cap;
+	struct vivid_vbi_gen_data	vbi_gen;
+	u8				*edid;
+	unsigned			edid_blocks;
+	unsigned			edid_max_blocks;
+	unsigned			webcam_size_idx;
+	unsigned			webcam_ival_idx;
+	unsigned			tv_freq;
+	unsigned			tv_audmode;
+	unsigned			tv_field_cap;
+	unsigned			tv_audio_input;
+
+	u32				power_present;
+
+	/* Capture Overlay */
+	struct v4l2_framebuffer		fb_cap;
+	struct v4l2_fh			*overlay_cap_owner;
+	void				*fb_vbase_cap;
+	int				overlay_cap_top, overlay_cap_left;
+	enum v4l2_field			overlay_cap_field;
+	void				*bitmap_cap;
+	struct v4l2_clip		clips_cap[MAX_CLIPS];
+	struct v4l2_clip		try_clips_cap[MAX_CLIPS];
+	unsigned			clipcount_cap;
+
+	/* Output */
+	unsigned			output;
+	v4l2_std_id			std_out;
+	struct v4l2_dv_timings		dv_timings_out;
+	u32				colorspace_out;
+	u32				ycbcr_enc_out;
+	u32				hsv_enc_out;
+	u32				quantization_out;
+	u32				xfer_func_out;
+	u32				service_set_out;
+	unsigned			bytesperline_out[TPG_MAX_PLANES];
+	unsigned			tv_field_out;
+	unsigned			tv_audio_output;
+	bool				vbi_out_have_wss;
+	u8				vbi_out_wss[2];
+	bool				vbi_out_have_cc[2];
+	u8				vbi_out_cc[2][2];
+	bool				dvi_d_out;
+	u8				*scaled_line;
+	u8				*blended_line;
+	unsigned			cur_scaled_line;
+	bool				display_present[MAX_OUTPUTS];
+
+	/* Output Overlay */
+	void				*fb_vbase_out;
+	bool				overlay_out_enabled;
+	int				overlay_out_top, overlay_out_left;
+	void				*bitmap_out;
+	struct v4l2_clip		clips_out[MAX_CLIPS];
+	struct v4l2_clip		try_clips_out[MAX_CLIPS];
+	unsigned			clipcount_out;
+	unsigned			fbuf_out_flags;
+	u32				chromakey_out;
+	u8				global_alpha_out;
+
+	/* video capture */
+	struct tpg_data			tpg;
+	unsigned			ms_vid_cap;
+	bool				must_blank[VIDEO_MAX_FRAME];
+
+	const struct vivid_fmt		*fmt_cap;
+	struct v4l2_fract		timeperframe_vid_cap;
+	enum v4l2_field			field_cap;
+	struct v4l2_rect		src_rect;
+	struct v4l2_rect		fmt_cap_rect;
+	struct v4l2_rect		crop_cap;
+	struct v4l2_rect		compose_cap;
+	struct v4l2_rect		crop_bounds_cap;
+	struct vb2_queue		vb_vid_cap_q;
+	struct list_head		vid_cap_active;
+	struct vb2_queue		vb_vbi_cap_q;
+	struct list_head		vbi_cap_active;
+	struct vb2_queue		vb_meta_cap_q;
+	struct list_head		meta_cap_active;
+	struct vb2_queue		vb_touch_cap_q;
+	struct list_head		touch_cap_active;
+
+	/* thread for generating video capture stream */
+	struct task_struct		*kthread_vid_cap;
+	unsigned long			jiffies_vid_cap;
+	u64				cap_stream_start;
+	u64				cap_frame_period;
+	u64				cap_frame_eof_offset;
+	u32				cap_seq_offset;
+	u32				cap_seq_count;
+	bool				cap_seq_resync;
+	u32				vid_cap_seq_start;
+	u32				vid_cap_seq_count;
+	bool				vid_cap_streaming;
+	u32				vbi_cap_seq_start;
+	u32				vbi_cap_seq_count;
+	bool				vbi_cap_streaming;
+	bool				stream_sliced_vbi_cap;
+	u32				meta_cap_seq_start;
+	u32				meta_cap_seq_count;
+	bool				meta_cap_streaming;
+
+	/* Touch capture */
+	struct task_struct		*kthread_touch_cap;
+	unsigned long			jiffies_touch_cap;
+	u64				touch_cap_stream_start;
+	u32				touch_cap_seq_offset;
+	bool				touch_cap_seq_resync;
+	u32				touch_cap_seq_start;
+	u32				touch_cap_seq_count;
+	bool				touch_cap_streaming;
+	struct v4l2_fract		timeperframe_tch_cap;
+	struct v4l2_pix_format		tch_format;
+	int				tch_pat_random;
+
+	/* video output */
+	const struct vivid_fmt		*fmt_out;
+	struct v4l2_fract		timeperframe_vid_out;
+	enum v4l2_field			field_out;
+	struct v4l2_rect		sink_rect;
+	struct v4l2_rect		fmt_out_rect;
+	struct v4l2_rect		crop_out;
+	struct v4l2_rect		compose_out;
+	struct v4l2_rect		compose_bounds_out;
+	struct vb2_queue		vb_vid_out_q;
+	struct list_head		vid_out_active;
+	struct vb2_queue		vb_vbi_out_q;
+	struct list_head		vbi_out_active;
+	struct vb2_queue		vb_meta_out_q;
+	struct list_head		meta_out_active;
+
+	/* video loop precalculated rectangles */
+
+	/*
+	 * Intersection between what the output side composes and the capture side
+	 * crops. I.e., what actually needs to be copied from the output buffer to
+	 * the capture buffer.
+	 */
+	struct v4l2_rect		loop_vid_copy;
+	/* The part of the output buffer that (after scaling) corresponds to loop_vid_copy. */
+	struct v4l2_rect		loop_vid_out;
+	/* The part of the capture buffer that (after scaling) corresponds to loop_vid_copy. */
+	struct v4l2_rect		loop_vid_cap;
+	/*
+	 * The intersection of the framebuffer, the overlay output window and
+	 * loop_vid_copy. I.e., the part of the framebuffer that actually should be
+	 * blended with the compose_out rectangle. This uses the framebuffer origin.
+	 */
+	struct v4l2_rect		loop_fb_copy;
+	/* The same as loop_fb_copy but with compose_out origin. */
+	struct v4l2_rect		loop_vid_overlay;
+	/*
+	 * The part of the capture buffer that (after scaling) corresponds
+	 * to loop_vid_overlay.
+	 */
+	struct v4l2_rect		loop_vid_overlay_cap;
+
+	/* thread for generating video output stream */
+	struct task_struct		*kthread_vid_out;
+	unsigned long			jiffies_vid_out;
+	u32				out_seq_offset;
+	u32				out_seq_count;
+	bool				out_seq_resync;
+	u32				vid_out_seq_start;
+	u32				vid_out_seq_count;
+	bool				vid_out_streaming;
+	u32				vbi_out_seq_start;
+	u32				vbi_out_seq_count;
+	bool				vbi_out_streaming;
+	bool				stream_sliced_vbi_out;
+	u32				meta_out_seq_start;
+	u32				meta_out_seq_count;
+	bool				meta_out_streaming;
+
+	/* SDR capture */
+	struct vb2_queue		vb_sdr_cap_q;
+	struct list_head		sdr_cap_active;
+	u32				sdr_pixelformat; /* v4l2 format id */
+	unsigned			sdr_buffersize;
+	unsigned			sdr_adc_freq;
+	unsigned			sdr_fm_freq;
+	unsigned			sdr_fm_deviation;
+	int				sdr_fixp_src_phase;
+	int				sdr_fixp_mod_phase;
+
+	bool				tstamp_src_is_soe;
+	bool				has_crop_cap;
+	bool				has_compose_cap;
+	bool				has_scaler_cap;
+	bool				has_crop_out;
+	bool				has_compose_out;
+	bool				has_scaler_out;
+
+	/* thread for generating SDR stream */
+	struct task_struct		*kthread_sdr_cap;
+	unsigned long			jiffies_sdr_cap;
+	u32				sdr_cap_seq_offset;
+	u32				sdr_cap_seq_count;
+	bool				sdr_cap_seq_resync;
+
+	/* RDS generator */
+	struct vivid_rds_gen		rds_gen;
+
+	/* Radio receiver */
+	unsigned			radio_rx_freq;
+	unsigned			radio_rx_audmode;
+	int				radio_rx_sig_qual;
+	unsigned			radio_rx_hw_seek_mode;
+	bool				radio_rx_hw_seek_prog_lim;
+	bool				radio_rx_rds_controls;
+	bool				radio_rx_rds_enabled;
+	unsigned			radio_rx_rds_use_alternates;
+	unsigned			radio_rx_rds_last_block;
+	struct v4l2_fh			*radio_rx_rds_owner;
+
+	/* Radio transmitter */
+	unsigned			radio_tx_freq;
+	unsigned			radio_tx_subchans;
+	bool				radio_tx_rds_controls;
+	unsigned			radio_tx_rds_last_block;
+	struct v4l2_fh			*radio_tx_rds_owner;
+
+	/* Shared between radio receiver and transmitter */
+	bool				radio_rds_loop;
+	ktime_t				radio_rds_init_time;
+
+	/* CEC */
+	struct cec_adapter		*cec_rx_adap;
+	struct cec_adapter		*cec_tx_adap[MAX_OUTPUTS];
+	struct workqueue_struct		*cec_workqueue;
+	spinlock_t			cec_slock;
+	struct list_head		cec_work_list;
+	unsigned int			cec_xfer_time_jiffies;
+	unsigned long			cec_xfer_start_jiffies;
+	u8				cec_output2bus_map[MAX_OUTPUTS];
+
+	/* CEC OSD String */
+	char				osd[14];
+	unsigned long			osd_jiffies;
+
+	bool				meta_pts;
+	bool				meta_scr;
+};
+
+static inline bool vivid_is_webcam(const struct vivid_dev *dev)
+{
+	return dev->input_type[dev->input] == WEBCAM;
+}
+
+static inline bool vivid_is_tv_cap(const struct vivid_dev *dev)
+{
+	return dev->input_type[dev->input] == TV;
+}
+
+static inline bool vivid_is_svid_cap(const struct vivid_dev *dev)
+{
+	return dev->input_type[dev->input] == SVID;
+}
+
+static inline bool vivid_is_hdmi_cap(const struct vivid_dev *dev)
+{
+	return dev->input_type[dev->input] == HDMI;
+}
+
+static inline bool vivid_is_sdtv_cap(const struct vivid_dev *dev)
+{
+	return vivid_is_tv_cap(dev) || vivid_is_svid_cap(dev);
+}
+
+static inline bool vivid_is_svid_out(const struct vivid_dev *dev)
+{
+	return dev->output_type[dev->output] == SVID;
+}
+
+static inline bool vivid_is_hdmi_out(const struct vivid_dev *dev)
+{
+	return dev->output_type[dev->output] == HDMI;
+}
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-ctrls.c b/drivers/media/test-drivers/vivid/vivid-ctrls.c
new file mode 100644
index 000000000000..334130568dcb
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-ctrls.c
@@ -0,0 +1,1939 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-ctrls.c - control support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-common.h>
+
+#include "vivid-core.h"
+#include "vivid-vid-cap.h"
+#include "vivid-vid-out.h"
+#include "vivid-vid-common.h"
+#include "vivid-radio-common.h"
+#include "vivid-osd.h"
+#include "vivid-ctrls.h"
+#include "vivid-cec.h"
+
+#define VIVID_CID_CUSTOM_BASE		(V4L2_CID_USER_BASE | 0xf000)
+#define VIVID_CID_BUTTON		(VIVID_CID_CUSTOM_BASE + 0)
+#define VIVID_CID_BOOLEAN		(VIVID_CID_CUSTOM_BASE + 1)
+#define VIVID_CID_INTEGER		(VIVID_CID_CUSTOM_BASE + 2)
+#define VIVID_CID_INTEGER64		(VIVID_CID_CUSTOM_BASE + 3)
+#define VIVID_CID_MENU			(VIVID_CID_CUSTOM_BASE + 4)
+#define VIVID_CID_STRING		(VIVID_CID_CUSTOM_BASE + 5)
+#define VIVID_CID_BITMASK		(VIVID_CID_CUSTOM_BASE + 6)
+#define VIVID_CID_INTMENU		(VIVID_CID_CUSTOM_BASE + 7)
+#define VIVID_CID_U32_ARRAY		(VIVID_CID_CUSTOM_BASE + 8)
+#define VIVID_CID_U16_MATRIX		(VIVID_CID_CUSTOM_BASE + 9)
+#define VIVID_CID_U8_4D_ARRAY		(VIVID_CID_CUSTOM_BASE + 10)
+#define VIVID_CID_AREA			(VIVID_CID_CUSTOM_BASE + 11)
+
+#define VIVID_CID_VIVID_BASE		(0x00f00000 | 0xf000)
+#define VIVID_CID_VIVID_CLASS		(0x00f00000 | 1)
+#define VIVID_CID_TEST_PATTERN		(VIVID_CID_VIVID_BASE + 0)
+#define VIVID_CID_OSD_TEXT_MODE		(VIVID_CID_VIVID_BASE + 1)
+#define VIVID_CID_HOR_MOVEMENT		(VIVID_CID_VIVID_BASE + 2)
+#define VIVID_CID_VERT_MOVEMENT		(VIVID_CID_VIVID_BASE + 3)
+#define VIVID_CID_SHOW_BORDER		(VIVID_CID_VIVID_BASE + 4)
+#define VIVID_CID_SHOW_SQUARE		(VIVID_CID_VIVID_BASE + 5)
+#define VIVID_CID_INSERT_SAV		(VIVID_CID_VIVID_BASE + 6)
+#define VIVID_CID_INSERT_EAV		(VIVID_CID_VIVID_BASE + 7)
+#define VIVID_CID_VBI_CAP_INTERLACED	(VIVID_CID_VIVID_BASE + 8)
+
+#define VIVID_CID_HFLIP			(VIVID_CID_VIVID_BASE + 20)
+#define VIVID_CID_VFLIP			(VIVID_CID_VIVID_BASE + 21)
+#define VIVID_CID_STD_ASPECT_RATIO	(VIVID_CID_VIVID_BASE + 22)
+#define VIVID_CID_DV_TIMINGS_ASPECT_RATIO	(VIVID_CID_VIVID_BASE + 23)
+#define VIVID_CID_TSTAMP_SRC		(VIVID_CID_VIVID_BASE + 24)
+#define VIVID_CID_COLORSPACE		(VIVID_CID_VIVID_BASE + 25)
+#define VIVID_CID_XFER_FUNC		(VIVID_CID_VIVID_BASE + 26)
+#define VIVID_CID_YCBCR_ENC		(VIVID_CID_VIVID_BASE + 27)
+#define VIVID_CID_QUANTIZATION		(VIVID_CID_VIVID_BASE + 28)
+#define VIVID_CID_LIMITED_RGB_RANGE	(VIVID_CID_VIVID_BASE + 29)
+#define VIVID_CID_ALPHA_MODE		(VIVID_CID_VIVID_BASE + 30)
+#define VIVID_CID_HAS_CROP_CAP		(VIVID_CID_VIVID_BASE + 31)
+#define VIVID_CID_HAS_COMPOSE_CAP	(VIVID_CID_VIVID_BASE + 32)
+#define VIVID_CID_HAS_SCALER_CAP	(VIVID_CID_VIVID_BASE + 33)
+#define VIVID_CID_HAS_CROP_OUT		(VIVID_CID_VIVID_BASE + 34)
+#define VIVID_CID_HAS_COMPOSE_OUT	(VIVID_CID_VIVID_BASE + 35)
+#define VIVID_CID_HAS_SCALER_OUT	(VIVID_CID_VIVID_BASE + 36)
+#define VIVID_CID_LOOP_VIDEO		(VIVID_CID_VIVID_BASE + 37)
+#define VIVID_CID_SEQ_WRAP		(VIVID_CID_VIVID_BASE + 38)
+#define VIVID_CID_TIME_WRAP		(VIVID_CID_VIVID_BASE + 39)
+#define VIVID_CID_MAX_EDID_BLOCKS	(VIVID_CID_VIVID_BASE + 40)
+#define VIVID_CID_PERCENTAGE_FILL	(VIVID_CID_VIVID_BASE + 41)
+#define VIVID_CID_REDUCED_FPS		(VIVID_CID_VIVID_BASE + 42)
+#define VIVID_CID_HSV_ENC		(VIVID_CID_VIVID_BASE + 43)
+#define VIVID_CID_DISPLAY_PRESENT	(VIVID_CID_VIVID_BASE + 44)
+
+#define VIVID_CID_STD_SIGNAL_MODE	(VIVID_CID_VIVID_BASE + 60)
+#define VIVID_CID_STANDARD		(VIVID_CID_VIVID_BASE + 61)
+#define VIVID_CID_DV_TIMINGS_SIGNAL_MODE	(VIVID_CID_VIVID_BASE + 62)
+#define VIVID_CID_DV_TIMINGS		(VIVID_CID_VIVID_BASE + 63)
+#define VIVID_CID_PERC_DROPPED		(VIVID_CID_VIVID_BASE + 64)
+#define VIVID_CID_DISCONNECT		(VIVID_CID_VIVID_BASE + 65)
+#define VIVID_CID_DQBUF_ERROR		(VIVID_CID_VIVID_BASE + 66)
+#define VIVID_CID_QUEUE_SETUP_ERROR	(VIVID_CID_VIVID_BASE + 67)
+#define VIVID_CID_BUF_PREPARE_ERROR	(VIVID_CID_VIVID_BASE + 68)
+#define VIVID_CID_START_STR_ERROR	(VIVID_CID_VIVID_BASE + 69)
+#define VIVID_CID_QUEUE_ERROR		(VIVID_CID_VIVID_BASE + 70)
+#define VIVID_CID_CLEAR_FB		(VIVID_CID_VIVID_BASE + 71)
+#define VIVID_CID_REQ_VALIDATE_ERROR	(VIVID_CID_VIVID_BASE + 72)
+
+#define VIVID_CID_RADIO_SEEK_MODE	(VIVID_CID_VIVID_BASE + 90)
+#define VIVID_CID_RADIO_SEEK_PROG_LIM	(VIVID_CID_VIVID_BASE + 91)
+#define VIVID_CID_RADIO_RX_RDS_RBDS	(VIVID_CID_VIVID_BASE + 92)
+#define VIVID_CID_RADIO_RX_RDS_BLOCKIO	(VIVID_CID_VIVID_BASE + 93)
+
+#define VIVID_CID_RADIO_TX_RDS_BLOCKIO	(VIVID_CID_VIVID_BASE + 94)
+
+#define VIVID_CID_SDR_CAP_FM_DEVIATION	(VIVID_CID_VIVID_BASE + 110)
+
+#define VIVID_CID_META_CAP_GENERATE_PTS	(VIVID_CID_VIVID_BASE + 111)
+#define VIVID_CID_META_CAP_GENERATE_SCR	(VIVID_CID_VIVID_BASE + 112)
+
+/* General User Controls */
+
+static int vivid_user_gen_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_user_gen);
+
+	switch (ctrl->id) {
+	case VIVID_CID_DISCONNECT:
+		v4l2_info(&dev->v4l2_dev, "disconnect\n");
+		clear_bit(V4L2_FL_REGISTERED, &dev->vid_cap_dev.flags);
+		clear_bit(V4L2_FL_REGISTERED, &dev->vid_out_dev.flags);
+		clear_bit(V4L2_FL_REGISTERED, &dev->vbi_cap_dev.flags);
+		clear_bit(V4L2_FL_REGISTERED, &dev->vbi_out_dev.flags);
+		clear_bit(V4L2_FL_REGISTERED, &dev->sdr_cap_dev.flags);
+		clear_bit(V4L2_FL_REGISTERED, &dev->radio_rx_dev.flags);
+		clear_bit(V4L2_FL_REGISTERED, &dev->radio_tx_dev.flags);
+		clear_bit(V4L2_FL_REGISTERED, &dev->meta_cap_dev.flags);
+		break;
+	case VIVID_CID_BUTTON:
+		dev->button_pressed = 30;
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_user_gen_ctrl_ops = {
+	.s_ctrl = vivid_user_gen_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_button = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_BUTTON,
+	.name = "Button",
+	.type = V4L2_CTRL_TYPE_BUTTON,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_boolean = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_BOOLEAN,
+	.name = "Boolean",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.min = 0,
+	.max = 1,
+	.step = 1,
+	.def = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_int32 = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_INTEGER,
+	.name = "Integer 32 Bits",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 0xffffffff80000000ULL,
+	.max = 0x7fffffff,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_int64 = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_INTEGER64,
+	.name = "Integer 64 Bits",
+	.type = V4L2_CTRL_TYPE_INTEGER64,
+	.min = 0x8000000000000000ULL,
+	.max = 0x7fffffffffffffffLL,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_u32_array = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_U32_ARRAY,
+	.name = "U32 1 Element Array",
+	.type = V4L2_CTRL_TYPE_U32,
+	.def = 0x18,
+	.min = 0x10,
+	.max = 0x20000,
+	.step = 1,
+	.dims = { 1 },
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_u16_matrix = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_U16_MATRIX,
+	.name = "U16 8x16 Matrix",
+	.type = V4L2_CTRL_TYPE_U16,
+	.def = 0x18,
+	.min = 0x10,
+	.max = 0x2000,
+	.step = 1,
+	.dims = { 8, 16 },
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_u8_4d_array = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_U8_4D_ARRAY,
+	.name = "U8 2x3x4x5 Array",
+	.type = V4L2_CTRL_TYPE_U8,
+	.def = 0x18,
+	.min = 0x10,
+	.max = 0x20,
+	.step = 1,
+	.dims = { 2, 3, 4, 5 },
+};
+
+static const char * const vivid_ctrl_menu_strings[] = {
+	"Menu Item 0 (Skipped)",
+	"Menu Item 1",
+	"Menu Item 2 (Skipped)",
+	"Menu Item 3",
+	"Menu Item 4",
+	"Menu Item 5 (Skipped)",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_menu = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_MENU,
+	.name = "Menu",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.min = 1,
+	.max = 4,
+	.def = 3,
+	.menu_skip_mask = 0x04,
+	.qmenu = vivid_ctrl_menu_strings,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_string = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_STRING,
+	.name = "String",
+	.type = V4L2_CTRL_TYPE_STRING,
+	.min = 2,
+	.max = 4,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_bitmask = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_BITMASK,
+	.name = "Bitmask",
+	.type = V4L2_CTRL_TYPE_BITMASK,
+	.def = 0x80002000,
+	.min = 0,
+	.max = 0x80402010,
+	.step = 0,
+};
+
+static const s64 vivid_ctrl_int_menu_values[] = {
+	1, 1, 2, 3, 5, 8, 13, 21, 42,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_int_menu = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_INTMENU,
+	.name = "Integer Menu",
+	.type = V4L2_CTRL_TYPE_INTEGER_MENU,
+	.min = 1,
+	.max = 8,
+	.def = 4,
+	.menu_skip_mask = 0x02,
+	.qmenu_int = vivid_ctrl_int_menu_values,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_disconnect = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_DISCONNECT,
+	.name = "Disconnect",
+	.type = V4L2_CTRL_TYPE_BUTTON,
+};
+
+static const struct v4l2_area area = {
+	.width = 1000,
+	.height = 2000,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_area = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.id = VIVID_CID_AREA,
+	.name = "Area",
+	.type = V4L2_CTRL_TYPE_AREA,
+	.p_def.p_const = &area,
+};
+
+/* Framebuffer Controls */
+
+static int vivid_fb_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler,
+					     struct vivid_dev, ctrl_hdl_fb);
+
+	switch (ctrl->id) {
+	case VIVID_CID_CLEAR_FB:
+		vivid_clear_fb(dev);
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_fb_ctrl_ops = {
+	.s_ctrl = vivid_fb_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_clear_fb = {
+	.ops = &vivid_fb_ctrl_ops,
+	.id = VIVID_CID_CLEAR_FB,
+	.name = "Clear Framebuffer",
+	.type = V4L2_CTRL_TYPE_BUTTON,
+};
+
+
+/* Video User Controls */
+
+static int vivid_user_vid_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_user_vid);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUTOGAIN:
+		dev->gain->val = (jiffies_to_msecs(jiffies) / 1000) & 0xff;
+		break;
+	}
+	return 0;
+}
+
+static int vivid_user_vid_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_user_vid);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		dev->input_brightness[dev->input] = ctrl->val - dev->input * 128;
+		tpg_s_brightness(&dev->tpg, dev->input_brightness[dev->input]);
+		break;
+	case V4L2_CID_CONTRAST:
+		tpg_s_contrast(&dev->tpg, ctrl->val);
+		break;
+	case V4L2_CID_SATURATION:
+		tpg_s_saturation(&dev->tpg, ctrl->val);
+		break;
+	case V4L2_CID_HUE:
+		tpg_s_hue(&dev->tpg, ctrl->val);
+		break;
+	case V4L2_CID_HFLIP:
+		dev->hflip = ctrl->val;
+		tpg_s_hflip(&dev->tpg, dev->sensor_hflip ^ dev->hflip);
+		break;
+	case V4L2_CID_VFLIP:
+		dev->vflip = ctrl->val;
+		tpg_s_vflip(&dev->tpg, dev->sensor_vflip ^ dev->vflip);
+		break;
+	case V4L2_CID_ALPHA_COMPONENT:
+		tpg_s_alpha_component(&dev->tpg, ctrl->val);
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_user_vid_ctrl_ops = {
+	.g_volatile_ctrl = vivid_user_vid_g_volatile_ctrl,
+	.s_ctrl = vivid_user_vid_s_ctrl,
+};
+
+
+/* Video Capture Controls */
+
+static int vivid_vid_cap_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	static const u32 colorspaces[] = {
+		V4L2_COLORSPACE_SMPTE170M,
+		V4L2_COLORSPACE_REC709,
+		V4L2_COLORSPACE_SRGB,
+		V4L2_COLORSPACE_OPRGB,
+		V4L2_COLORSPACE_BT2020,
+		V4L2_COLORSPACE_DCI_P3,
+		V4L2_COLORSPACE_SMPTE240M,
+		V4L2_COLORSPACE_470_SYSTEM_M,
+		V4L2_COLORSPACE_470_SYSTEM_BG,
+	};
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_vid_cap);
+	unsigned int i, j;
+
+	switch (ctrl->id) {
+	case VIVID_CID_TEST_PATTERN:
+		vivid_update_quality(dev);
+		tpg_s_pattern(&dev->tpg, ctrl->val);
+		break;
+	case VIVID_CID_COLORSPACE:
+		tpg_s_colorspace(&dev->tpg, colorspaces[ctrl->val]);
+		vivid_send_source_change(dev, TV);
+		vivid_send_source_change(dev, SVID);
+		vivid_send_source_change(dev, HDMI);
+		vivid_send_source_change(dev, WEBCAM);
+		break;
+	case VIVID_CID_XFER_FUNC:
+		tpg_s_xfer_func(&dev->tpg, ctrl->val);
+		vivid_send_source_change(dev, TV);
+		vivid_send_source_change(dev, SVID);
+		vivid_send_source_change(dev, HDMI);
+		vivid_send_source_change(dev, WEBCAM);
+		break;
+	case VIVID_CID_YCBCR_ENC:
+		tpg_s_ycbcr_enc(&dev->tpg, ctrl->val);
+		vivid_send_source_change(dev, TV);
+		vivid_send_source_change(dev, SVID);
+		vivid_send_source_change(dev, HDMI);
+		vivid_send_source_change(dev, WEBCAM);
+		break;
+	case VIVID_CID_HSV_ENC:
+		tpg_s_hsv_enc(&dev->tpg, ctrl->val ? V4L2_HSV_ENC_256 :
+						     V4L2_HSV_ENC_180);
+		vivid_send_source_change(dev, TV);
+		vivid_send_source_change(dev, SVID);
+		vivid_send_source_change(dev, HDMI);
+		vivid_send_source_change(dev, WEBCAM);
+		break;
+	case VIVID_CID_QUANTIZATION:
+		tpg_s_quantization(&dev->tpg, ctrl->val);
+		vivid_send_source_change(dev, TV);
+		vivid_send_source_change(dev, SVID);
+		vivid_send_source_change(dev, HDMI);
+		vivid_send_source_change(dev, WEBCAM);
+		break;
+	case V4L2_CID_DV_RX_RGB_RANGE:
+		if (!vivid_is_hdmi_cap(dev))
+			break;
+		tpg_s_rgb_range(&dev->tpg, ctrl->val);
+		break;
+	case VIVID_CID_LIMITED_RGB_RANGE:
+		tpg_s_real_rgb_range(&dev->tpg, ctrl->val ?
+				V4L2_DV_RGB_RANGE_LIMITED : V4L2_DV_RGB_RANGE_FULL);
+		break;
+	case VIVID_CID_ALPHA_MODE:
+		tpg_s_alpha_mode(&dev->tpg, ctrl->val);
+		break;
+	case VIVID_CID_HOR_MOVEMENT:
+		tpg_s_mv_hor_mode(&dev->tpg, ctrl->val);
+		break;
+	case VIVID_CID_VERT_MOVEMENT:
+		tpg_s_mv_vert_mode(&dev->tpg, ctrl->val);
+		break;
+	case VIVID_CID_OSD_TEXT_MODE:
+		dev->osd_mode = ctrl->val;
+		break;
+	case VIVID_CID_PERCENTAGE_FILL:
+		tpg_s_perc_fill(&dev->tpg, ctrl->val);
+		for (i = 0; i < VIDEO_MAX_FRAME; i++)
+			dev->must_blank[i] = ctrl->val < 100;
+		break;
+	case VIVID_CID_INSERT_SAV:
+		tpg_s_insert_sav(&dev->tpg, ctrl->val);
+		break;
+	case VIVID_CID_INSERT_EAV:
+		tpg_s_insert_eav(&dev->tpg, ctrl->val);
+		break;
+	case VIVID_CID_HFLIP:
+		dev->sensor_hflip = ctrl->val;
+		tpg_s_hflip(&dev->tpg, dev->sensor_hflip ^ dev->hflip);
+		break;
+	case VIVID_CID_VFLIP:
+		dev->sensor_vflip = ctrl->val;
+		tpg_s_vflip(&dev->tpg, dev->sensor_vflip ^ dev->vflip);
+		break;
+	case VIVID_CID_REDUCED_FPS:
+		dev->reduced_fps = ctrl->val;
+		vivid_update_format_cap(dev, true);
+		break;
+	case VIVID_CID_HAS_CROP_CAP:
+		dev->has_crop_cap = ctrl->val;
+		vivid_update_format_cap(dev, true);
+		break;
+	case VIVID_CID_HAS_COMPOSE_CAP:
+		dev->has_compose_cap = ctrl->val;
+		vivid_update_format_cap(dev, true);
+		break;
+	case VIVID_CID_HAS_SCALER_CAP:
+		dev->has_scaler_cap = ctrl->val;
+		vivid_update_format_cap(dev, true);
+		break;
+	case VIVID_CID_SHOW_BORDER:
+		tpg_s_show_border(&dev->tpg, ctrl->val);
+		break;
+	case VIVID_CID_SHOW_SQUARE:
+		tpg_s_show_square(&dev->tpg, ctrl->val);
+		break;
+	case VIVID_CID_STD_ASPECT_RATIO:
+		dev->std_aspect_ratio[dev->input] = ctrl->val;
+		tpg_s_video_aspect(&dev->tpg, vivid_get_video_aspect(dev));
+		break;
+	case VIVID_CID_DV_TIMINGS_SIGNAL_MODE:
+		dev->dv_timings_signal_mode[dev->input] =
+			dev->ctrl_dv_timings_signal_mode->val;
+		dev->query_dv_timings[dev->input] = dev->ctrl_dv_timings->val;
+
+		dev->power_present = 0;
+		for (i = 0, j = 0;
+		     i < ARRAY_SIZE(dev->dv_timings_signal_mode);
+		     i++)
+			if (dev->input_type[i] == HDMI) {
+				if (dev->dv_timings_signal_mode[i] != NO_SIGNAL)
+					dev->power_present |= (1 << j);
+				j++;
+			}
+		__v4l2_ctrl_s_ctrl(dev->ctrl_rx_power_present,
+				   dev->power_present);
+
+		v4l2_ctrl_activate(dev->ctrl_dv_timings,
+			dev->dv_timings_signal_mode[dev->input] ==
+				SELECTED_DV_TIMINGS);
+
+		vivid_update_quality(dev);
+		vivid_send_source_change(dev, HDMI);
+		break;
+	case VIVID_CID_DV_TIMINGS_ASPECT_RATIO:
+		dev->dv_timings_aspect_ratio[dev->input] = ctrl->val;
+		tpg_s_video_aspect(&dev->tpg, vivid_get_video_aspect(dev));
+		break;
+	case VIVID_CID_TSTAMP_SRC:
+		dev->tstamp_src_is_soe = ctrl->val;
+		dev->vb_vid_cap_q.timestamp_flags &= ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK;
+		if (dev->tstamp_src_is_soe)
+			dev->vb_vid_cap_q.timestamp_flags |= V4L2_BUF_FLAG_TSTAMP_SRC_SOE;
+		break;
+	case VIVID_CID_MAX_EDID_BLOCKS:
+		dev->edid_max_blocks = ctrl->val;
+		if (dev->edid_blocks > dev->edid_max_blocks)
+			dev->edid_blocks = dev->edid_max_blocks;
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_vid_cap_ctrl_ops = {
+	.s_ctrl = vivid_vid_cap_s_ctrl,
+};
+
+static const char * const vivid_ctrl_hor_movement_strings[] = {
+	"Move Left Fast",
+	"Move Left",
+	"Move Left Slow",
+	"No Movement",
+	"Move Right Slow",
+	"Move Right",
+	"Move Right Fast",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_hor_movement = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_HOR_MOVEMENT,
+	.name = "Horizontal Movement",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = TPG_MOVE_POS_FAST,
+	.def = TPG_MOVE_NONE,
+	.qmenu = vivid_ctrl_hor_movement_strings,
+};
+
+static const char * const vivid_ctrl_vert_movement_strings[] = {
+	"Move Up Fast",
+	"Move Up",
+	"Move Up Slow",
+	"No Movement",
+	"Move Down Slow",
+	"Move Down",
+	"Move Down Fast",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_vert_movement = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_VERT_MOVEMENT,
+	.name = "Vertical Movement",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = TPG_MOVE_POS_FAST,
+	.def = TPG_MOVE_NONE,
+	.qmenu = vivid_ctrl_vert_movement_strings,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_show_border = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_SHOW_BORDER,
+	.name = "Show Border",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_show_square = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_SHOW_SQUARE,
+	.name = "Show Square",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const char * const vivid_ctrl_osd_mode_strings[] = {
+	"All",
+	"Counters Only",
+	"None",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_osd_mode = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_OSD_TEXT_MODE,
+	.name = "OSD Text Mode",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(vivid_ctrl_osd_mode_strings) - 2,
+	.qmenu = vivid_ctrl_osd_mode_strings,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_perc_fill = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_PERCENTAGE_FILL,
+	.name = "Fill Percentage of Frame",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 0,
+	.max = 100,
+	.def = 100,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_insert_sav = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_INSERT_SAV,
+	.name = "Insert SAV Code in Image",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_insert_eav = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_INSERT_EAV,
+	.name = "Insert EAV Code in Image",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_hflip = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_HFLIP,
+	.name = "Sensor Flipped Horizontally",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_vflip = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_VFLIP,
+	.name = "Sensor Flipped Vertically",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_reduced_fps = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_REDUCED_FPS,
+	.name = "Reduced Framerate",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_has_crop_cap = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_HAS_CROP_CAP,
+	.name = "Enable Capture Cropping",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.def = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_has_compose_cap = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_HAS_COMPOSE_CAP,
+	.name = "Enable Capture Composing",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.def = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_has_scaler_cap = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_HAS_SCALER_CAP,
+	.name = "Enable Capture Scaler",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.def = 1,
+	.step = 1,
+};
+
+static const char * const vivid_ctrl_tstamp_src_strings[] = {
+	"End of Frame",
+	"Start of Exposure",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_tstamp_src = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_TSTAMP_SRC,
+	.name = "Timestamp Source",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(vivid_ctrl_tstamp_src_strings) - 2,
+	.qmenu = vivid_ctrl_tstamp_src_strings,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_std_aspect_ratio = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_STD_ASPECT_RATIO,
+	.name = "Standard Aspect Ratio",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.min = 1,
+	.max = 4,
+	.def = 1,
+	.qmenu = tpg_aspect_strings,
+};
+
+static const char * const vivid_ctrl_dv_timings_signal_mode_strings[] = {
+	"Current DV Timings",
+	"No Signal",
+	"No Lock",
+	"Out of Range",
+	"Selected DV Timings",
+	"Cycle Through All DV Timings",
+	"Custom DV Timings",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_dv_timings_signal_mode = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_DV_TIMINGS_SIGNAL_MODE,
+	.name = "DV Timings Signal Mode",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = 5,
+	.qmenu = vivid_ctrl_dv_timings_signal_mode_strings,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_dv_timings_aspect_ratio = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_DV_TIMINGS_ASPECT_RATIO,
+	.name = "DV Timings Aspect Ratio",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = 3,
+	.qmenu = tpg_aspect_strings,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_max_edid_blocks = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_MAX_EDID_BLOCKS,
+	.name = "Maximum EDID Blocks",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 1,
+	.max = 256,
+	.def = 2,
+	.step = 1,
+};
+
+static const char * const vivid_ctrl_colorspace_strings[] = {
+	"SMPTE 170M",
+	"Rec. 709",
+	"sRGB",
+	"opRGB",
+	"BT.2020",
+	"DCI-P3",
+	"SMPTE 240M",
+	"470 System M",
+	"470 System BG",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_colorspace = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_COLORSPACE,
+	.name = "Colorspace",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(vivid_ctrl_colorspace_strings) - 2,
+	.def = 2,
+	.qmenu = vivid_ctrl_colorspace_strings,
+};
+
+static const char * const vivid_ctrl_xfer_func_strings[] = {
+	"Default",
+	"Rec. 709",
+	"sRGB",
+	"opRGB",
+	"SMPTE 240M",
+	"None",
+	"DCI-P3",
+	"SMPTE 2084",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_xfer_func = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_XFER_FUNC,
+	.name = "Transfer Function",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(vivid_ctrl_xfer_func_strings) - 2,
+	.qmenu = vivid_ctrl_xfer_func_strings,
+};
+
+static const char * const vivid_ctrl_ycbcr_enc_strings[] = {
+	"Default",
+	"ITU-R 601",
+	"Rec. 709",
+	"xvYCC 601",
+	"xvYCC 709",
+	"",
+	"BT.2020",
+	"BT.2020 Constant Luminance",
+	"SMPTE 240M",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_ycbcr_enc = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_YCBCR_ENC,
+	.name = "Y'CbCr Encoding",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.menu_skip_mask = 1 << 5,
+	.max = ARRAY_SIZE(vivid_ctrl_ycbcr_enc_strings) - 2,
+	.qmenu = vivid_ctrl_ycbcr_enc_strings,
+};
+
+static const char * const vivid_ctrl_hsv_enc_strings[] = {
+	"Hue 0-179",
+	"Hue 0-256",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_hsv_enc = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_HSV_ENC,
+	.name = "HSV Encoding",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(vivid_ctrl_hsv_enc_strings) - 2,
+	.qmenu = vivid_ctrl_hsv_enc_strings,
+};
+
+static const char * const vivid_ctrl_quantization_strings[] = {
+	"Default",
+	"Full Range",
+	"Limited Range",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_quantization = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_QUANTIZATION,
+	.name = "Quantization",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(vivid_ctrl_quantization_strings) - 2,
+	.qmenu = vivid_ctrl_quantization_strings,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_alpha_mode = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_ALPHA_MODE,
+	.name = "Apply Alpha To Red Only",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_limited_rgb_range = {
+	.ops = &vivid_vid_cap_ctrl_ops,
+	.id = VIVID_CID_LIMITED_RGB_RANGE,
+	.name = "Limited RGB Range (16-235)",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+
+/* Video Loop Control */
+
+static int vivid_loop_cap_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_loop_cap);
+
+	switch (ctrl->id) {
+	case VIVID_CID_LOOP_VIDEO:
+		dev->loop_video = ctrl->val;
+		vivid_update_quality(dev);
+		vivid_send_source_change(dev, SVID);
+		vivid_send_source_change(dev, HDMI);
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_loop_cap_ctrl_ops = {
+	.s_ctrl = vivid_loop_cap_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_loop_video = {
+	.ops = &vivid_loop_cap_ctrl_ops,
+	.id = VIVID_CID_LOOP_VIDEO,
+	.name = "Loop Video",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+
+/* VBI Capture Control */
+
+static int vivid_vbi_cap_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_vbi_cap);
+
+	switch (ctrl->id) {
+	case VIVID_CID_VBI_CAP_INTERLACED:
+		dev->vbi_cap_interlaced = ctrl->val;
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_vbi_cap_ctrl_ops = {
+	.s_ctrl = vivid_vbi_cap_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_vbi_cap_interlaced = {
+	.ops = &vivid_vbi_cap_ctrl_ops,
+	.id = VIVID_CID_VBI_CAP_INTERLACED,
+	.name = "Interlaced VBI Format",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+
+/* Video Output Controls */
+
+static int vivid_vid_out_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_vid_out);
+	struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt;
+	u32 display_present = 0;
+	unsigned int i, j, bus_idx;
+
+	switch (ctrl->id) {
+	case VIVID_CID_HAS_CROP_OUT:
+		dev->has_crop_out = ctrl->val;
+		vivid_update_format_out(dev);
+		break;
+	case VIVID_CID_HAS_COMPOSE_OUT:
+		dev->has_compose_out = ctrl->val;
+		vivid_update_format_out(dev);
+		break;
+	case VIVID_CID_HAS_SCALER_OUT:
+		dev->has_scaler_out = ctrl->val;
+		vivid_update_format_out(dev);
+		break;
+	case V4L2_CID_DV_TX_MODE:
+		dev->dvi_d_out = ctrl->val == V4L2_DV_TX_MODE_DVI_D;
+		if (!vivid_is_hdmi_out(dev))
+			break;
+		if (!dev->dvi_d_out && (bt->flags & V4L2_DV_FL_IS_CE_VIDEO)) {
+			if (bt->width == 720 && bt->height <= 576)
+				dev->colorspace_out = V4L2_COLORSPACE_SMPTE170M;
+			else
+				dev->colorspace_out = V4L2_COLORSPACE_REC709;
+			dev->quantization_out = V4L2_QUANTIZATION_DEFAULT;
+		} else {
+			dev->colorspace_out = V4L2_COLORSPACE_SRGB;
+			dev->quantization_out = dev->dvi_d_out ?
+					V4L2_QUANTIZATION_LIM_RANGE :
+					V4L2_QUANTIZATION_DEFAULT;
+		}
+		if (dev->loop_video)
+			vivid_send_source_change(dev, HDMI);
+		break;
+	case VIVID_CID_DISPLAY_PRESENT:
+		if (dev->output_type[dev->output] != HDMI)
+			break;
+
+		dev->display_present[dev->output] = ctrl->val;
+		for (i = 0, j = 0; i < dev->num_outputs; i++)
+			if (dev->output_type[i] == HDMI)
+				display_present |=
+					dev->display_present[i] << j++;
+
+		__v4l2_ctrl_s_ctrl(dev->ctrl_tx_rxsense, display_present);
+
+		if (dev->edid_blocks) {
+			__v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present,
+					   display_present);
+			__v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug,
+					   display_present);
+		}
+
+		bus_idx = dev->cec_output2bus_map[dev->output];
+		if (!dev->cec_tx_adap[bus_idx])
+			break;
+
+		if (ctrl->val && dev->edid_blocks)
+			cec_s_phys_addr(dev->cec_tx_adap[bus_idx],
+					dev->cec_tx_adap[bus_idx]->phys_addr,
+					false);
+		else
+			cec_phys_addr_invalidate(dev->cec_tx_adap[bus_idx]);
+
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_vid_out_ctrl_ops = {
+	.s_ctrl = vivid_vid_out_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_has_crop_out = {
+	.ops = &vivid_vid_out_ctrl_ops,
+	.id = VIVID_CID_HAS_CROP_OUT,
+	.name = "Enable Output Cropping",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.def = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_has_compose_out = {
+	.ops = &vivid_vid_out_ctrl_ops,
+	.id = VIVID_CID_HAS_COMPOSE_OUT,
+	.name = "Enable Output Composing",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.def = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_has_scaler_out = {
+	.ops = &vivid_vid_out_ctrl_ops,
+	.id = VIVID_CID_HAS_SCALER_OUT,
+	.name = "Enable Output Scaler",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.def = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_display_present = {
+	.ops = &vivid_vid_out_ctrl_ops,
+	.id = VIVID_CID_DISPLAY_PRESENT,
+	.name = "Display Present",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.def = 1,
+	.step = 1,
+};
+
+/* Streaming Controls */
+
+static int vivid_streaming_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_streaming);
+	u64 rem;
+
+	switch (ctrl->id) {
+	case VIVID_CID_DQBUF_ERROR:
+		dev->dqbuf_error = true;
+		break;
+	case VIVID_CID_PERC_DROPPED:
+		dev->perc_dropped_buffers = ctrl->val;
+		break;
+	case VIVID_CID_QUEUE_SETUP_ERROR:
+		dev->queue_setup_error = true;
+		break;
+	case VIVID_CID_BUF_PREPARE_ERROR:
+		dev->buf_prepare_error = true;
+		break;
+	case VIVID_CID_START_STR_ERROR:
+		dev->start_streaming_error = true;
+		break;
+	case VIVID_CID_REQ_VALIDATE_ERROR:
+		dev->req_validate_error = true;
+		break;
+	case VIVID_CID_QUEUE_ERROR:
+		if (vb2_start_streaming_called(&dev->vb_vid_cap_q))
+			vb2_queue_error(&dev->vb_vid_cap_q);
+		if (vb2_start_streaming_called(&dev->vb_vbi_cap_q))
+			vb2_queue_error(&dev->vb_vbi_cap_q);
+		if (vb2_start_streaming_called(&dev->vb_vid_out_q))
+			vb2_queue_error(&dev->vb_vid_out_q);
+		if (vb2_start_streaming_called(&dev->vb_vbi_out_q))
+			vb2_queue_error(&dev->vb_vbi_out_q);
+		if (vb2_start_streaming_called(&dev->vb_sdr_cap_q))
+			vb2_queue_error(&dev->vb_sdr_cap_q);
+		break;
+	case VIVID_CID_SEQ_WRAP:
+		dev->seq_wrap = ctrl->val;
+		break;
+	case VIVID_CID_TIME_WRAP:
+		dev->time_wrap = ctrl->val;
+		if (ctrl->val == 0) {
+			dev->time_wrap_offset = 0;
+			break;
+		}
+		/*
+		 * We want to set the time 16 seconds before the 32 bit tv_sec
+		 * value of struct timeval would wrap around. So first we
+		 * calculate ktime_get_ns() % ((1 << 32) * NSEC_PER_SEC), and
+		 * then we set the offset to ((1 << 32) - 16) * NSEC_PER_SEC).
+		 */
+		div64_u64_rem(ktime_get_ns(),
+			0x100000000ULL * NSEC_PER_SEC, &rem);
+		dev->time_wrap_offset =
+			(0x100000000ULL - 16) * NSEC_PER_SEC - rem;
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_streaming_ctrl_ops = {
+	.s_ctrl = vivid_streaming_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_dqbuf_error = {
+	.ops = &vivid_streaming_ctrl_ops,
+	.id = VIVID_CID_DQBUF_ERROR,
+	.name = "Inject V4L2_BUF_FLAG_ERROR",
+	.type = V4L2_CTRL_TYPE_BUTTON,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_perc_dropped = {
+	.ops = &vivid_streaming_ctrl_ops,
+	.id = VIVID_CID_PERC_DROPPED,
+	.name = "Percentage of Dropped Buffers",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 0,
+	.max = 100,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_queue_setup_error = {
+	.ops = &vivid_streaming_ctrl_ops,
+	.id = VIVID_CID_QUEUE_SETUP_ERROR,
+	.name = "Inject VIDIOC_REQBUFS Error",
+	.type = V4L2_CTRL_TYPE_BUTTON,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_buf_prepare_error = {
+	.ops = &vivid_streaming_ctrl_ops,
+	.id = VIVID_CID_BUF_PREPARE_ERROR,
+	.name = "Inject VIDIOC_QBUF Error",
+	.type = V4L2_CTRL_TYPE_BUTTON,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_start_streaming_error = {
+	.ops = &vivid_streaming_ctrl_ops,
+	.id = VIVID_CID_START_STR_ERROR,
+	.name = "Inject VIDIOC_STREAMON Error",
+	.type = V4L2_CTRL_TYPE_BUTTON,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_queue_error = {
+	.ops = &vivid_streaming_ctrl_ops,
+	.id = VIVID_CID_QUEUE_ERROR,
+	.name = "Inject Fatal Streaming Error",
+	.type = V4L2_CTRL_TYPE_BUTTON,
+};
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+static const struct v4l2_ctrl_config vivid_ctrl_req_validate_error = {
+	.ops = &vivid_streaming_ctrl_ops,
+	.id = VIVID_CID_REQ_VALIDATE_ERROR,
+	.name = "Inject req_validate() Error",
+	.type = V4L2_CTRL_TYPE_BUTTON,
+};
+#endif
+
+static const struct v4l2_ctrl_config vivid_ctrl_seq_wrap = {
+	.ops = &vivid_streaming_ctrl_ops,
+	.id = VIVID_CID_SEQ_WRAP,
+	.name = "Wrap Sequence Number",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_time_wrap = {
+	.ops = &vivid_streaming_ctrl_ops,
+	.id = VIVID_CID_TIME_WRAP,
+	.name = "Wrap Timestamp",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+
+/* SDTV Capture Controls */
+
+static int vivid_sdtv_cap_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_sdtv_cap);
+
+	switch (ctrl->id) {
+	case VIVID_CID_STD_SIGNAL_MODE:
+		dev->std_signal_mode[dev->input] =
+			dev->ctrl_std_signal_mode->val;
+		if (dev->std_signal_mode[dev->input] == SELECTED_STD)
+			dev->query_std[dev->input] =
+				vivid_standard[dev->ctrl_standard->val];
+		v4l2_ctrl_activate(dev->ctrl_standard,
+				   dev->std_signal_mode[dev->input] ==
+					SELECTED_STD);
+		vivid_update_quality(dev);
+		vivid_send_source_change(dev, TV);
+		vivid_send_source_change(dev, SVID);
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_sdtv_cap_ctrl_ops = {
+	.s_ctrl = vivid_sdtv_cap_s_ctrl,
+};
+
+static const char * const vivid_ctrl_std_signal_mode_strings[] = {
+	"Current Standard",
+	"No Signal",
+	"No Lock",
+	"",
+	"Selected Standard",
+	"Cycle Through All Standards",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_std_signal_mode = {
+	.ops = &vivid_sdtv_cap_ctrl_ops,
+	.id = VIVID_CID_STD_SIGNAL_MODE,
+	.name = "Standard Signal Mode",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(vivid_ctrl_std_signal_mode_strings) - 2,
+	.menu_skip_mask = 1 << 3,
+	.qmenu = vivid_ctrl_std_signal_mode_strings,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_standard = {
+	.ops = &vivid_sdtv_cap_ctrl_ops,
+	.id = VIVID_CID_STANDARD,
+	.name = "Standard",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = 14,
+	.qmenu = vivid_ctrl_standard_strings,
+};
+
+
+
+/* Radio Receiver Controls */
+
+static int vivid_radio_rx_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_radio_rx);
+
+	switch (ctrl->id) {
+	case VIVID_CID_RADIO_SEEK_MODE:
+		dev->radio_rx_hw_seek_mode = ctrl->val;
+		break;
+	case VIVID_CID_RADIO_SEEK_PROG_LIM:
+		dev->radio_rx_hw_seek_prog_lim = ctrl->val;
+		break;
+	case VIVID_CID_RADIO_RX_RDS_RBDS:
+		dev->rds_gen.use_rbds = ctrl->val;
+		break;
+	case VIVID_CID_RADIO_RX_RDS_BLOCKIO:
+		dev->radio_rx_rds_controls = ctrl->val;
+		dev->radio_rx_caps &= ~V4L2_CAP_READWRITE;
+		dev->radio_rx_rds_use_alternates = false;
+		if (!dev->radio_rx_rds_controls) {
+			dev->radio_rx_caps |= V4L2_CAP_READWRITE;
+			__v4l2_ctrl_s_ctrl(dev->radio_rx_rds_pty, 0);
+			__v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ta, 0);
+			__v4l2_ctrl_s_ctrl(dev->radio_rx_rds_tp, 0);
+			__v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ms, 0);
+			__v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_psname, "");
+			__v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_radiotext, "");
+		}
+		v4l2_ctrl_activate(dev->radio_rx_rds_pty, dev->radio_rx_rds_controls);
+		v4l2_ctrl_activate(dev->radio_rx_rds_psname, dev->radio_rx_rds_controls);
+		v4l2_ctrl_activate(dev->radio_rx_rds_radiotext, dev->radio_rx_rds_controls);
+		v4l2_ctrl_activate(dev->radio_rx_rds_ta, dev->radio_rx_rds_controls);
+		v4l2_ctrl_activate(dev->radio_rx_rds_tp, dev->radio_rx_rds_controls);
+		v4l2_ctrl_activate(dev->radio_rx_rds_ms, dev->radio_rx_rds_controls);
+		dev->radio_rx_dev.device_caps = dev->radio_rx_caps;
+		break;
+	case V4L2_CID_RDS_RECEPTION:
+		dev->radio_rx_rds_enabled = ctrl->val;
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_radio_rx_ctrl_ops = {
+	.s_ctrl = vivid_radio_rx_s_ctrl,
+};
+
+static const char * const vivid_ctrl_radio_rds_mode_strings[] = {
+	"Block I/O",
+	"Controls",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_radio_rx_rds_blockio = {
+	.ops = &vivid_radio_rx_ctrl_ops,
+	.id = VIVID_CID_RADIO_RX_RDS_BLOCKIO,
+	.name = "RDS Rx I/O Mode",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.qmenu = vivid_ctrl_radio_rds_mode_strings,
+	.max = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_radio_rx_rds_rbds = {
+	.ops = &vivid_radio_rx_ctrl_ops,
+	.id = VIVID_CID_RADIO_RX_RDS_RBDS,
+	.name = "Generate RBDS Instead of RDS",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+static const char * const vivid_ctrl_radio_hw_seek_mode_strings[] = {
+	"Bounded",
+	"Wrap Around",
+	"Both",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_radio_hw_seek_mode = {
+	.ops = &vivid_radio_rx_ctrl_ops,
+	.id = VIVID_CID_RADIO_SEEK_MODE,
+	.name = "Radio HW Seek Mode",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = 2,
+	.qmenu = vivid_ctrl_radio_hw_seek_mode_strings,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_radio_hw_seek_prog_lim = {
+	.ops = &vivid_radio_rx_ctrl_ops,
+	.id = VIVID_CID_RADIO_SEEK_PROG_LIM,
+	.name = "Radio Programmable HW Seek",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.step = 1,
+};
+
+
+/* Radio Transmitter Controls */
+
+static int vivid_radio_tx_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_radio_tx);
+
+	switch (ctrl->id) {
+	case VIVID_CID_RADIO_TX_RDS_BLOCKIO:
+		dev->radio_tx_rds_controls = ctrl->val;
+		dev->radio_tx_caps &= ~V4L2_CAP_READWRITE;
+		if (!dev->radio_tx_rds_controls)
+			dev->radio_tx_caps |= V4L2_CAP_READWRITE;
+		dev->radio_tx_dev.device_caps = dev->radio_tx_caps;
+		break;
+	case V4L2_CID_RDS_TX_PTY:
+		if (dev->radio_rx_rds_controls)
+			v4l2_ctrl_s_ctrl(dev->radio_rx_rds_pty, ctrl->val);
+		break;
+	case V4L2_CID_RDS_TX_PS_NAME:
+		if (dev->radio_rx_rds_controls)
+			v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_psname, ctrl->p_new.p_char);
+		break;
+	case V4L2_CID_RDS_TX_RADIO_TEXT:
+		if (dev->radio_rx_rds_controls)
+			v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_radiotext, ctrl->p_new.p_char);
+		break;
+	case V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT:
+		if (dev->radio_rx_rds_controls)
+			v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ta, ctrl->val);
+		break;
+	case V4L2_CID_RDS_TX_TRAFFIC_PROGRAM:
+		if (dev->radio_rx_rds_controls)
+			v4l2_ctrl_s_ctrl(dev->radio_rx_rds_tp, ctrl->val);
+		break;
+	case V4L2_CID_RDS_TX_MUSIC_SPEECH:
+		if (dev->radio_rx_rds_controls)
+			v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ms, ctrl->val);
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_radio_tx_ctrl_ops = {
+	.s_ctrl = vivid_radio_tx_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_radio_tx_rds_blockio = {
+	.ops = &vivid_radio_tx_ctrl_ops,
+	.id = VIVID_CID_RADIO_TX_RDS_BLOCKIO,
+	.name = "RDS Tx I/O Mode",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.qmenu = vivid_ctrl_radio_rds_mode_strings,
+	.max = 1,
+	.def = 1,
+};
+
+
+/* SDR Capture Controls */
+
+static int vivid_sdr_cap_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_sdr_cap);
+
+	switch (ctrl->id) {
+	case VIVID_CID_SDR_CAP_FM_DEVIATION:
+		dev->sdr_fm_deviation = ctrl->val;
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_sdr_cap_ctrl_ops = {
+	.s_ctrl = vivid_sdr_cap_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_sdr_cap_fm_deviation = {
+	.ops = &vivid_sdr_cap_ctrl_ops,
+	.id = VIVID_CID_SDR_CAP_FM_DEVIATION,
+	.name = "FM Deviation",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min =    100,
+	.max = 200000,
+	.def =  75000,
+	.step =     1,
+};
+
+/* Metadata Capture Control */
+
+static int vivid_meta_cap_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev,
+					     ctrl_hdl_meta_cap);
+
+	switch (ctrl->id) {
+	case VIVID_CID_META_CAP_GENERATE_PTS:
+		dev->meta_pts = ctrl->val;
+		break;
+	case VIVID_CID_META_CAP_GENERATE_SCR:
+		dev->meta_scr = ctrl->val;
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vivid_meta_cap_ctrl_ops = {
+	.s_ctrl = vivid_meta_cap_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_meta_has_pts = {
+	.ops = &vivid_meta_cap_ctrl_ops,
+	.id = VIVID_CID_META_CAP_GENERATE_PTS,
+	.name = "Generate PTS",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.def = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_meta_has_src_clk = {
+	.ops = &vivid_meta_cap_ctrl_ops,
+	.id = VIVID_CID_META_CAP_GENERATE_SCR,
+	.name = "Generate SCR",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.max = 1,
+	.def = 1,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config vivid_ctrl_class = {
+	.ops = &vivid_user_gen_ctrl_ops,
+	.flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY,
+	.id = VIVID_CID_VIVID_CLASS,
+	.name = "Vivid Controls",
+	.type = V4L2_CTRL_TYPE_CTRL_CLASS,
+};
+
+int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap,
+		bool show_ccs_out, bool no_error_inj,
+		bool has_sdtv, bool has_hdmi)
+{
+	struct v4l2_ctrl_handler *hdl_user_gen = &dev->ctrl_hdl_user_gen;
+	struct v4l2_ctrl_handler *hdl_user_vid = &dev->ctrl_hdl_user_vid;
+	struct v4l2_ctrl_handler *hdl_user_aud = &dev->ctrl_hdl_user_aud;
+	struct v4l2_ctrl_handler *hdl_streaming = &dev->ctrl_hdl_streaming;
+	struct v4l2_ctrl_handler *hdl_sdtv_cap = &dev->ctrl_hdl_sdtv_cap;
+	struct v4l2_ctrl_handler *hdl_loop_cap = &dev->ctrl_hdl_loop_cap;
+	struct v4l2_ctrl_handler *hdl_fb = &dev->ctrl_hdl_fb;
+	struct v4l2_ctrl_handler *hdl_vid_cap = &dev->ctrl_hdl_vid_cap;
+	struct v4l2_ctrl_handler *hdl_vid_out = &dev->ctrl_hdl_vid_out;
+	struct v4l2_ctrl_handler *hdl_vbi_cap = &dev->ctrl_hdl_vbi_cap;
+	struct v4l2_ctrl_handler *hdl_vbi_out = &dev->ctrl_hdl_vbi_out;
+	struct v4l2_ctrl_handler *hdl_radio_rx = &dev->ctrl_hdl_radio_rx;
+	struct v4l2_ctrl_handler *hdl_radio_tx = &dev->ctrl_hdl_radio_tx;
+	struct v4l2_ctrl_handler *hdl_sdr_cap = &dev->ctrl_hdl_sdr_cap;
+	struct v4l2_ctrl_handler *hdl_meta_cap = &dev->ctrl_hdl_meta_cap;
+	struct v4l2_ctrl_handler *hdl_meta_out = &dev->ctrl_hdl_meta_out;
+	struct v4l2_ctrl_handler *hdl_tch_cap = &dev->ctrl_hdl_touch_cap;
+
+	struct v4l2_ctrl_config vivid_ctrl_dv_timings = {
+		.ops = &vivid_vid_cap_ctrl_ops,
+		.id = VIVID_CID_DV_TIMINGS,
+		.name = "DV Timings",
+		.type = V4L2_CTRL_TYPE_MENU,
+	};
+	int i;
+
+	v4l2_ctrl_handler_init(hdl_user_gen, 10);
+	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_user_vid, 9);
+	v4l2_ctrl_new_custom(hdl_user_vid, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_user_aud, 2);
+	v4l2_ctrl_new_custom(hdl_user_aud, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_streaming, 8);
+	v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_sdtv_cap, 2);
+	v4l2_ctrl_new_custom(hdl_sdtv_cap, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_loop_cap, 1);
+	v4l2_ctrl_new_custom(hdl_loop_cap, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_fb, 1);
+	v4l2_ctrl_new_custom(hdl_fb, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_vid_cap, 55);
+	v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_vid_out, 26);
+	if (!no_error_inj || dev->has_fb || dev->num_hdmi_outputs)
+		v4l2_ctrl_new_custom(hdl_vid_out, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_vbi_cap, 21);
+	v4l2_ctrl_new_custom(hdl_vbi_cap, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_vbi_out, 19);
+	if (!no_error_inj)
+		v4l2_ctrl_new_custom(hdl_vbi_out, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_radio_rx, 17);
+	v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_radio_tx, 17);
+	v4l2_ctrl_new_custom(hdl_radio_tx, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_sdr_cap, 19);
+	v4l2_ctrl_new_custom(hdl_sdr_cap, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_meta_cap, 2);
+	v4l2_ctrl_new_custom(hdl_meta_cap, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_meta_out, 2);
+	v4l2_ctrl_new_custom(hdl_meta_out, &vivid_ctrl_class, NULL);
+	v4l2_ctrl_handler_init(hdl_tch_cap, 2);
+	v4l2_ctrl_new_custom(hdl_tch_cap, &vivid_ctrl_class, NULL);
+
+	/* User Controls */
+	dev->volume = v4l2_ctrl_new_std(hdl_user_aud, NULL,
+		V4L2_CID_AUDIO_VOLUME, 0, 255, 1, 200);
+	dev->mute = v4l2_ctrl_new_std(hdl_user_aud, NULL,
+		V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+	if (dev->has_vid_cap) {
+		dev->brightness = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+		for (i = 0; i < MAX_INPUTS; i++)
+			dev->input_brightness[i] = 128;
+		dev->contrast = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 255, 1, 128);
+		dev->saturation = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
+			V4L2_CID_SATURATION, 0, 255, 1, 128);
+		dev->hue = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
+			V4L2_CID_HUE, -128, 128, 1, 0);
+		v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+		v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+		dev->autogain = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
+			V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+		dev->gain = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
+			V4L2_CID_GAIN, 0, 255, 1, 100);
+		dev->alpha = v4l2_ctrl_new_std(hdl_user_vid, &vivid_user_vid_ctrl_ops,
+			V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 0);
+	}
+	dev->button = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_button, NULL);
+	dev->int32 = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_int32, NULL);
+	dev->int64 = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_int64, NULL);
+	dev->boolean = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_boolean, NULL);
+	dev->menu = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_menu, NULL);
+	dev->string = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_string, NULL);
+	dev->bitmask = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_bitmask, NULL);
+	dev->int_menu = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_int_menu, NULL);
+	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_area, NULL);
+	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u32_array, NULL);
+	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u16_matrix, NULL);
+	v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u8_4d_array, NULL);
+
+	if (dev->has_vid_cap) {
+		/* Image Processing Controls */
+		struct v4l2_ctrl_config vivid_ctrl_test_pattern = {
+			.ops = &vivid_vid_cap_ctrl_ops,
+			.id = VIVID_CID_TEST_PATTERN,
+			.name = "Test Pattern",
+			.type = V4L2_CTRL_TYPE_MENU,
+			.max = TPG_PAT_NOISE,
+			.qmenu = tpg_pattern_strings,
+		};
+
+		dev->test_pattern = v4l2_ctrl_new_custom(hdl_vid_cap,
+				&vivid_ctrl_test_pattern, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_perc_fill, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_hor_movement, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_vert_movement, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_osd_mode, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_show_border, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_show_square, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_hflip, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_vflip, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_insert_sav, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_insert_eav, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_reduced_fps, NULL);
+		if (show_ccs_cap) {
+			dev->ctrl_has_crop_cap = v4l2_ctrl_new_custom(hdl_vid_cap,
+				&vivid_ctrl_has_crop_cap, NULL);
+			dev->ctrl_has_compose_cap = v4l2_ctrl_new_custom(hdl_vid_cap,
+				&vivid_ctrl_has_compose_cap, NULL);
+			dev->ctrl_has_scaler_cap = v4l2_ctrl_new_custom(hdl_vid_cap,
+				&vivid_ctrl_has_scaler_cap, NULL);
+		}
+
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_tstamp_src, NULL);
+		dev->colorspace = v4l2_ctrl_new_custom(hdl_vid_cap,
+			&vivid_ctrl_colorspace, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_xfer_func, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_ycbcr_enc, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_hsv_enc, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_quantization, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_alpha_mode, NULL);
+	}
+
+	if (dev->has_vid_out && show_ccs_out) {
+		dev->ctrl_has_crop_out = v4l2_ctrl_new_custom(hdl_vid_out,
+			&vivid_ctrl_has_crop_out, NULL);
+		dev->ctrl_has_compose_out = v4l2_ctrl_new_custom(hdl_vid_out,
+			&vivid_ctrl_has_compose_out, NULL);
+		dev->ctrl_has_scaler_out = v4l2_ctrl_new_custom(hdl_vid_out,
+			&vivid_ctrl_has_scaler_out, NULL);
+	}
+
+	/*
+	 * Testing this driver with v4l2-compliance will trigger the error
+	 * injection controls, and after that nothing will work as expected.
+	 * So we have a module option to drop these error injecting controls
+	 * allowing us to run v4l2_compliance again.
+	 */
+	if (!no_error_inj) {
+		v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_disconnect, NULL);
+		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_dqbuf_error, NULL);
+		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_perc_dropped, NULL);
+		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_queue_setup_error, NULL);
+		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_buf_prepare_error, NULL);
+		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_start_streaming_error, NULL);
+		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_queue_error, NULL);
+#ifdef CONFIG_MEDIA_CONTROLLER
+		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_req_validate_error, NULL);
+#endif
+		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_seq_wrap, NULL);
+		v4l2_ctrl_new_custom(hdl_streaming, &vivid_ctrl_time_wrap, NULL);
+	}
+
+	if (has_sdtv && (dev->has_vid_cap || dev->has_vbi_cap)) {
+		if (dev->has_vid_cap)
+			v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_std_aspect_ratio, NULL);
+		dev->ctrl_std_signal_mode = v4l2_ctrl_new_custom(hdl_sdtv_cap,
+			&vivid_ctrl_std_signal_mode, NULL);
+		dev->ctrl_standard = v4l2_ctrl_new_custom(hdl_sdtv_cap,
+			&vivid_ctrl_standard, NULL);
+		if (dev->ctrl_std_signal_mode)
+			v4l2_ctrl_cluster(2, &dev->ctrl_std_signal_mode);
+		if (dev->has_raw_vbi_cap)
+			v4l2_ctrl_new_custom(hdl_vbi_cap, &vivid_ctrl_vbi_cap_interlaced, NULL);
+	}
+
+	if (dev->num_hdmi_inputs) {
+		s64 hdmi_input_mask = GENMASK(dev->num_hdmi_inputs - 1, 0);
+
+		dev->ctrl_dv_timings_signal_mode = v4l2_ctrl_new_custom(hdl_vid_cap,
+					&vivid_ctrl_dv_timings_signal_mode, NULL);
+
+		vivid_ctrl_dv_timings.max = dev->query_dv_timings_size - 1;
+		vivid_ctrl_dv_timings.qmenu =
+			(const char * const *)dev->query_dv_timings_qmenu;
+		dev->ctrl_dv_timings = v4l2_ctrl_new_custom(hdl_vid_cap,
+			&vivid_ctrl_dv_timings, NULL);
+		if (dev->ctrl_dv_timings_signal_mode)
+			v4l2_ctrl_cluster(2, &dev->ctrl_dv_timings_signal_mode);
+
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_dv_timings_aspect_ratio, NULL);
+		v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_max_edid_blocks, NULL);
+		dev->real_rgb_range_cap = v4l2_ctrl_new_custom(hdl_vid_cap,
+			&vivid_ctrl_limited_rgb_range, NULL);
+		dev->rgb_range_cap = v4l2_ctrl_new_std_menu(hdl_vid_cap,
+			&vivid_vid_cap_ctrl_ops,
+			V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
+			0, V4L2_DV_RGB_RANGE_AUTO);
+		dev->ctrl_rx_power_present = v4l2_ctrl_new_std(hdl_vid_cap,
+			NULL, V4L2_CID_DV_RX_POWER_PRESENT, 0, hdmi_input_mask,
+			0, hdmi_input_mask);
+
+	}
+	if (dev->num_hdmi_outputs) {
+		s64 hdmi_output_mask = GENMASK(dev->num_hdmi_outputs - 1, 0);
+
+		/*
+		 * We aren't doing anything with this at the moment, but
+		 * HDMI outputs typically have this controls.
+		 */
+		dev->ctrl_tx_rgb_range = v4l2_ctrl_new_std_menu(hdl_vid_out, NULL,
+			V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
+			0, V4L2_DV_RGB_RANGE_AUTO);
+		dev->ctrl_tx_mode = v4l2_ctrl_new_std_menu(hdl_vid_out, NULL,
+			V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI,
+			0, V4L2_DV_TX_MODE_HDMI);
+		dev->ctrl_display_present = v4l2_ctrl_new_custom(hdl_vid_out,
+			&vivid_ctrl_display_present, NULL);
+		dev->ctrl_tx_hotplug = v4l2_ctrl_new_std(hdl_vid_out,
+			NULL, V4L2_CID_DV_TX_HOTPLUG, 0, hdmi_output_mask,
+			0, hdmi_output_mask);
+		dev->ctrl_tx_rxsense = v4l2_ctrl_new_std(hdl_vid_out,
+			NULL, V4L2_CID_DV_TX_RXSENSE, 0, hdmi_output_mask,
+			0, hdmi_output_mask);
+		dev->ctrl_tx_edid_present = v4l2_ctrl_new_std(hdl_vid_out,
+			NULL, V4L2_CID_DV_TX_EDID_PRESENT, 0, hdmi_output_mask,
+			0, hdmi_output_mask);
+	}
+	if ((dev->has_vid_cap && dev->has_vid_out) ||
+	    (dev->has_vbi_cap && dev->has_vbi_out))
+		v4l2_ctrl_new_custom(hdl_loop_cap, &vivid_ctrl_loop_video, NULL);
+
+	if (dev->has_fb)
+		v4l2_ctrl_new_custom(hdl_fb, &vivid_ctrl_clear_fb, NULL);
+
+	if (dev->has_radio_rx) {
+		v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_radio_hw_seek_mode, NULL);
+		v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_radio_hw_seek_prog_lim, NULL);
+		v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_radio_rx_rds_blockio, NULL);
+		v4l2_ctrl_new_custom(hdl_radio_rx, &vivid_ctrl_radio_rx_rds_rbds, NULL);
+		v4l2_ctrl_new_std(hdl_radio_rx, &vivid_radio_rx_ctrl_ops,
+			V4L2_CID_RDS_RECEPTION, 0, 1, 1, 1);
+		dev->radio_rx_rds_pty = v4l2_ctrl_new_std(hdl_radio_rx,
+			&vivid_radio_rx_ctrl_ops,
+			V4L2_CID_RDS_RX_PTY, 0, 31, 1, 0);
+		dev->radio_rx_rds_psname = v4l2_ctrl_new_std(hdl_radio_rx,
+			&vivid_radio_rx_ctrl_ops,
+			V4L2_CID_RDS_RX_PS_NAME, 0, 8, 8, 0);
+		dev->radio_rx_rds_radiotext = v4l2_ctrl_new_std(hdl_radio_rx,
+			&vivid_radio_rx_ctrl_ops,
+			V4L2_CID_RDS_RX_RADIO_TEXT, 0, 64, 64, 0);
+		dev->radio_rx_rds_ta = v4l2_ctrl_new_std(hdl_radio_rx,
+			&vivid_radio_rx_ctrl_ops,
+			V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0);
+		dev->radio_rx_rds_tp = v4l2_ctrl_new_std(hdl_radio_rx,
+			&vivid_radio_rx_ctrl_ops,
+			V4L2_CID_RDS_RX_TRAFFIC_PROGRAM, 0, 1, 1, 0);
+		dev->radio_rx_rds_ms = v4l2_ctrl_new_std(hdl_radio_rx,
+			&vivid_radio_rx_ctrl_ops,
+			V4L2_CID_RDS_RX_MUSIC_SPEECH, 0, 1, 1, 1);
+	}
+	if (dev->has_radio_tx) {
+		v4l2_ctrl_new_custom(hdl_radio_tx,
+			&vivid_ctrl_radio_tx_rds_blockio, NULL);
+		dev->radio_tx_rds_pi = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_PI, 0, 0xffff, 1, 0x8088);
+		dev->radio_tx_rds_pty = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_PTY, 0, 31, 1, 3);
+		dev->radio_tx_rds_psname = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_PS_NAME, 0, 8, 8, 0);
+		if (dev->radio_tx_rds_psname)
+			v4l2_ctrl_s_ctrl_string(dev->radio_tx_rds_psname, "VIVID-TX");
+		dev->radio_tx_rds_radiotext = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_RADIO_TEXT, 0, 64 * 2, 64, 0);
+		if (dev->radio_tx_rds_radiotext)
+			v4l2_ctrl_s_ctrl_string(dev->radio_tx_rds_radiotext,
+			       "This is a VIVID default Radio Text template text, change at will");
+		dev->radio_tx_rds_mono_stereo = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_MONO_STEREO, 0, 1, 1, 1);
+		dev->radio_tx_rds_art_head = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_ARTIFICIAL_HEAD, 0, 1, 1, 0);
+		dev->radio_tx_rds_compressed = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_COMPRESSED, 0, 1, 1, 0);
+		dev->radio_tx_rds_dyn_pty = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_DYNAMIC_PTY, 0, 1, 1, 0);
+		dev->radio_tx_rds_ta = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0);
+		dev->radio_tx_rds_tp = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_TRAFFIC_PROGRAM, 0, 1, 1, 1);
+		dev->radio_tx_rds_ms = v4l2_ctrl_new_std(hdl_radio_tx,
+			&vivid_radio_tx_ctrl_ops,
+			V4L2_CID_RDS_TX_MUSIC_SPEECH, 0, 1, 1, 1);
+	}
+	if (dev->has_sdr_cap) {
+		v4l2_ctrl_new_custom(hdl_sdr_cap,
+			&vivid_ctrl_sdr_cap_fm_deviation, NULL);
+	}
+	if (dev->has_meta_cap) {
+		v4l2_ctrl_new_custom(hdl_meta_cap,
+				     &vivid_ctrl_meta_has_pts, NULL);
+		v4l2_ctrl_new_custom(hdl_meta_cap,
+				     &vivid_ctrl_meta_has_src_clk, NULL);
+	}
+
+	if (hdl_user_gen->error)
+		return hdl_user_gen->error;
+	if (hdl_user_vid->error)
+		return hdl_user_vid->error;
+	if (hdl_user_aud->error)
+		return hdl_user_aud->error;
+	if (hdl_streaming->error)
+		return hdl_streaming->error;
+	if (hdl_sdr_cap->error)
+		return hdl_sdr_cap->error;
+	if (hdl_loop_cap->error)
+		return hdl_loop_cap->error;
+
+	if (dev->autogain)
+		v4l2_ctrl_auto_cluster(2, &dev->autogain, 0, true);
+
+	if (dev->has_vid_cap) {
+		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_user_vid, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_user_aud, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_streaming, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_sdtv_cap, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_loop_cap, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vid_cap, hdl_fb, NULL, false);
+		if (hdl_vid_cap->error)
+			return hdl_vid_cap->error;
+		dev->vid_cap_dev.ctrl_handler = hdl_vid_cap;
+	}
+	if (dev->has_vid_out) {
+		v4l2_ctrl_add_handler(hdl_vid_out, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vid_out, hdl_user_aud, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vid_out, hdl_streaming, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vid_out, hdl_fb, NULL, false);
+		if (hdl_vid_out->error)
+			return hdl_vid_out->error;
+		dev->vid_out_dev.ctrl_handler = hdl_vid_out;
+	}
+	if (dev->has_vbi_cap) {
+		v4l2_ctrl_add_handler(hdl_vbi_cap, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vbi_cap, hdl_streaming, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vbi_cap, hdl_sdtv_cap, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vbi_cap, hdl_loop_cap, NULL, false);
+		if (hdl_vbi_cap->error)
+			return hdl_vbi_cap->error;
+		dev->vbi_cap_dev.ctrl_handler = hdl_vbi_cap;
+	}
+	if (dev->has_vbi_out) {
+		v4l2_ctrl_add_handler(hdl_vbi_out, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_vbi_out, hdl_streaming, NULL, false);
+		if (hdl_vbi_out->error)
+			return hdl_vbi_out->error;
+		dev->vbi_out_dev.ctrl_handler = hdl_vbi_out;
+	}
+	if (dev->has_radio_rx) {
+		v4l2_ctrl_add_handler(hdl_radio_rx, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_radio_rx, hdl_user_aud, NULL, false);
+		if (hdl_radio_rx->error)
+			return hdl_radio_rx->error;
+		dev->radio_rx_dev.ctrl_handler = hdl_radio_rx;
+	}
+	if (dev->has_radio_tx) {
+		v4l2_ctrl_add_handler(hdl_radio_tx, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_radio_tx, hdl_user_aud, NULL, false);
+		if (hdl_radio_tx->error)
+			return hdl_radio_tx->error;
+		dev->radio_tx_dev.ctrl_handler = hdl_radio_tx;
+	}
+	if (dev->has_sdr_cap) {
+		v4l2_ctrl_add_handler(hdl_sdr_cap, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_sdr_cap, hdl_streaming, NULL, false);
+		if (hdl_sdr_cap->error)
+			return hdl_sdr_cap->error;
+		dev->sdr_cap_dev.ctrl_handler = hdl_sdr_cap;
+	}
+	if (dev->has_meta_cap) {
+		v4l2_ctrl_add_handler(hdl_meta_cap, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_meta_cap, hdl_streaming, NULL, false);
+		if (hdl_meta_cap->error)
+			return hdl_meta_cap->error;
+		dev->meta_cap_dev.ctrl_handler = hdl_meta_cap;
+	}
+	if (dev->has_meta_out) {
+		v4l2_ctrl_add_handler(hdl_meta_out, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_meta_out, hdl_streaming, NULL, false);
+		if (hdl_meta_out->error)
+			return hdl_meta_out->error;
+		dev->meta_out_dev.ctrl_handler = hdl_meta_out;
+	}
+	if (dev->has_touch_cap) {
+		v4l2_ctrl_add_handler(hdl_tch_cap, hdl_user_gen, NULL, false);
+		v4l2_ctrl_add_handler(hdl_tch_cap, hdl_streaming, NULL, false);
+		if (hdl_tch_cap->error)
+			return hdl_tch_cap->error;
+		dev->touch_cap_dev.ctrl_handler = hdl_tch_cap;
+	}
+	return 0;
+}
+
+void vivid_free_controls(struct vivid_dev *dev)
+{
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_vid_cap);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_vid_out);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_vbi_cap);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_vbi_out);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_radio_rx);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_radio_tx);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_sdr_cap);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_user_gen);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_user_vid);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_user_aud);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_streaming);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_sdtv_cap);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_loop_cap);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_fb);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_meta_cap);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_meta_out);
+	v4l2_ctrl_handler_free(&dev->ctrl_hdl_touch_cap);
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-ctrls.h b/drivers/media/test-drivers/vivid/vivid-ctrls.h
new file mode 100644
index 000000000000..6fad5f5d0054
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-ctrls.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-ctrls.h - control support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_CTRLS_H_
+#define _VIVID_CTRLS_H_
+
+enum vivid_hw_seek_modes {
+	VIVID_HW_SEEK_BOUNDED,
+	VIVID_HW_SEEK_WRAP,
+	VIVID_HW_SEEK_BOTH,
+};
+
+int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap,
+		bool show_ccs_out, bool no_error_inj,
+		bool has_sdtv, bool has_hdmi);
+void vivid_free_controls(struct vivid_dev *dev);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-kthread-cap.c b/drivers/media/test-drivers/vivid/vivid-kthread-cap.c
new file mode 100644
index 000000000000..01a9d671b947
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-kthread-cap.c
@@ -0,0 +1,1007 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-kthread-cap.h - video/vbi capture thread support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/font.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/random.h>
+#include <linux/v4l2-dv-timings.h>
+#include <asm/div64.h>
+#include <media/videobuf2-vmalloc.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-rect.h>
+
+#include "vivid-core.h"
+#include "vivid-vid-common.h"
+#include "vivid-vid-cap.h"
+#include "vivid-vid-out.h"
+#include "vivid-radio-common.h"
+#include "vivid-radio-rx.h"
+#include "vivid-radio-tx.h"
+#include "vivid-sdr-cap.h"
+#include "vivid-vbi-cap.h"
+#include "vivid-vbi-out.h"
+#include "vivid-osd.h"
+#include "vivid-ctrls.h"
+#include "vivid-kthread-cap.h"
+#include "vivid-meta-cap.h"
+
+static inline v4l2_std_id vivid_get_std_cap(const struct vivid_dev *dev)
+{
+	if (vivid_is_sdtv_cap(dev))
+		return dev->std_cap[dev->input];
+	return 0;
+}
+
+static void copy_pix(struct vivid_dev *dev, int win_y, int win_x,
+			u16 *cap, const u16 *osd)
+{
+	u16 out;
+	int left = dev->overlay_out_left;
+	int top = dev->overlay_out_top;
+	int fb_x = win_x + left;
+	int fb_y = win_y + top;
+	int i;
+
+	out = *cap;
+	*cap = *osd;
+	if (dev->bitmap_out) {
+		const u8 *p = dev->bitmap_out;
+		unsigned stride = (dev->compose_out.width + 7) / 8;
+
+		win_x -= dev->compose_out.left;
+		win_y -= dev->compose_out.top;
+		if (!(p[stride * win_y + win_x / 8] & (1 << (win_x & 7))))
+			return;
+	}
+
+	for (i = 0; i < dev->clipcount_out; i++) {
+		struct v4l2_rect *r = &dev->clips_out[i].c;
+
+		if (fb_y >= r->top && fb_y < r->top + r->height &&
+		    fb_x >= r->left && fb_x < r->left + r->width)
+			return;
+	}
+	if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_CHROMAKEY) &&
+	    *osd != dev->chromakey_out)
+		return;
+	if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_SRC_CHROMAKEY) &&
+	    out == dev->chromakey_out)
+		return;
+	if (dev->fmt_cap->alpha_mask) {
+		if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_GLOBAL_ALPHA) &&
+		    dev->global_alpha_out)
+			return;
+		if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_LOCAL_ALPHA) &&
+		    *cap & dev->fmt_cap->alpha_mask)
+			return;
+		if ((dev->fbuf_out_flags & V4L2_FBUF_FLAG_LOCAL_INV_ALPHA) &&
+		    !(*cap & dev->fmt_cap->alpha_mask))
+			return;
+	}
+	*cap = out;
+}
+
+static void blend_line(struct vivid_dev *dev, unsigned y_offset, unsigned x_offset,
+		u8 *vcapbuf, const u8 *vosdbuf,
+		unsigned width, unsigned pixsize)
+{
+	unsigned x;
+
+	for (x = 0; x < width; x++, vcapbuf += pixsize, vosdbuf += pixsize) {
+		copy_pix(dev, y_offset, x_offset + x,
+			 (u16 *)vcapbuf, (const u16 *)vosdbuf);
+	}
+}
+
+static void scale_line(const u8 *src, u8 *dst, unsigned srcw, unsigned dstw, unsigned twopixsize)
+{
+	/* Coarse scaling with Bresenham */
+	unsigned int_part;
+	unsigned fract_part;
+	unsigned src_x = 0;
+	unsigned error = 0;
+	unsigned x;
+
+	/*
+	 * We always combine two pixels to prevent color bleed in the packed
+	 * yuv case.
+	 */
+	srcw /= 2;
+	dstw /= 2;
+	int_part = srcw / dstw;
+	fract_part = srcw % dstw;
+	for (x = 0; x < dstw; x++, dst += twopixsize) {
+		memcpy(dst, src + src_x * twopixsize, twopixsize);
+		src_x += int_part;
+		error += fract_part;
+		if (error >= dstw) {
+			error -= dstw;
+			src_x++;
+		}
+	}
+}
+
+/*
+ * Precalculate the rectangles needed to perform video looping:
+ *
+ * The nominal pipeline is that the video output buffer is cropped by
+ * crop_out, scaled to compose_out, overlaid with the output overlay,
+ * cropped on the capture side by crop_cap and scaled again to the video
+ * capture buffer using compose_cap.
+ *
+ * To keep things efficient we calculate the intersection of compose_out
+ * and crop_cap (since that's the only part of the video that will
+ * actually end up in the capture buffer), determine which part of the
+ * video output buffer that is and which part of the video capture buffer
+ * so we can scale the video straight from the output buffer to the capture
+ * buffer without any intermediate steps.
+ *
+ * If we need to deal with an output overlay, then there is no choice and
+ * that intermediate step still has to be taken. For the output overlay
+ * support we calculate the intersection of the framebuffer and the overlay
+ * window (which may be partially or wholly outside of the framebuffer
+ * itself) and the intersection of that with loop_vid_copy (i.e. the part of
+ * the actual looped video that will be overlaid). The result is calculated
+ * both in framebuffer coordinates (loop_fb_copy) and compose_out coordinates
+ * (loop_vid_overlay). Finally calculate the part of the capture buffer that
+ * will receive that overlaid video.
+ */
+static void vivid_precalc_copy_rects(struct vivid_dev *dev)
+{
+	/* Framebuffer rectangle */
+	struct v4l2_rect r_fb = {
+		0, 0, dev->display_width, dev->display_height
+	};
+	/* Overlay window rectangle in framebuffer coordinates */
+	struct v4l2_rect r_overlay = {
+		dev->overlay_out_left, dev->overlay_out_top,
+		dev->compose_out.width, dev->compose_out.height
+	};
+
+	v4l2_rect_intersect(&dev->loop_vid_copy, &dev->crop_cap, &dev->compose_out);
+
+	dev->loop_vid_out = dev->loop_vid_copy;
+	v4l2_rect_scale(&dev->loop_vid_out, &dev->compose_out, &dev->crop_out);
+	dev->loop_vid_out.left += dev->crop_out.left;
+	dev->loop_vid_out.top += dev->crop_out.top;
+
+	dev->loop_vid_cap = dev->loop_vid_copy;
+	v4l2_rect_scale(&dev->loop_vid_cap, &dev->crop_cap, &dev->compose_cap);
+
+	dprintk(dev, 1,
+		"loop_vid_copy: %dx%d@%dx%d loop_vid_out: %dx%d@%dx%d loop_vid_cap: %dx%d@%dx%d\n",
+		dev->loop_vid_copy.width, dev->loop_vid_copy.height,
+		dev->loop_vid_copy.left, dev->loop_vid_copy.top,
+		dev->loop_vid_out.width, dev->loop_vid_out.height,
+		dev->loop_vid_out.left, dev->loop_vid_out.top,
+		dev->loop_vid_cap.width, dev->loop_vid_cap.height,
+		dev->loop_vid_cap.left, dev->loop_vid_cap.top);
+
+	v4l2_rect_intersect(&r_overlay, &r_fb, &r_overlay);
+
+	/* shift r_overlay to the same origin as compose_out */
+	r_overlay.left += dev->compose_out.left - dev->overlay_out_left;
+	r_overlay.top += dev->compose_out.top - dev->overlay_out_top;
+
+	v4l2_rect_intersect(&dev->loop_vid_overlay, &r_overlay, &dev->loop_vid_copy);
+	dev->loop_fb_copy = dev->loop_vid_overlay;
+
+	/* shift dev->loop_fb_copy back again to the fb origin */
+	dev->loop_fb_copy.left -= dev->compose_out.left - dev->overlay_out_left;
+	dev->loop_fb_copy.top -= dev->compose_out.top - dev->overlay_out_top;
+
+	dev->loop_vid_overlay_cap = dev->loop_vid_overlay;
+	v4l2_rect_scale(&dev->loop_vid_overlay_cap, &dev->crop_cap, &dev->compose_cap);
+
+	dprintk(dev, 1,
+		"loop_fb_copy: %dx%d@%dx%d loop_vid_overlay: %dx%d@%dx%d loop_vid_overlay_cap: %dx%d@%dx%d\n",
+		dev->loop_fb_copy.width, dev->loop_fb_copy.height,
+		dev->loop_fb_copy.left, dev->loop_fb_copy.top,
+		dev->loop_vid_overlay.width, dev->loop_vid_overlay.height,
+		dev->loop_vid_overlay.left, dev->loop_vid_overlay.top,
+		dev->loop_vid_overlay_cap.width, dev->loop_vid_overlay_cap.height,
+		dev->loop_vid_overlay_cap.left, dev->loop_vid_overlay_cap.top);
+}
+
+static void *plane_vaddr(struct tpg_data *tpg, struct vivid_buffer *buf,
+			 unsigned p, unsigned bpl[TPG_MAX_PLANES], unsigned h)
+{
+	unsigned i;
+	void *vbuf;
+
+	if (p == 0 || tpg_g_buffers(tpg) > 1)
+		return vb2_plane_vaddr(&buf->vb.vb2_buf, p);
+	vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+	for (i = 0; i < p; i++)
+		vbuf += bpl[i] * h / tpg->vdownsampling[i];
+	return vbuf;
+}
+
+static noinline_for_stack int vivid_copy_buffer(struct vivid_dev *dev, unsigned p,
+		u8 *vcapbuf, struct vivid_buffer *vid_cap_buf)
+{
+	bool blank = dev->must_blank[vid_cap_buf->vb.vb2_buf.index];
+	struct tpg_data *tpg = &dev->tpg;
+	struct vivid_buffer *vid_out_buf = NULL;
+	unsigned vdiv = dev->fmt_out->vdownsampling[p];
+	unsigned twopixsize = tpg_g_twopixelsize(tpg, p);
+	unsigned img_width = tpg_hdiv(tpg, p, dev->compose_cap.width);
+	unsigned img_height = dev->compose_cap.height;
+	unsigned stride_cap = tpg->bytesperline[p];
+	unsigned stride_out = dev->bytesperline_out[p];
+	unsigned stride_osd = dev->display_byte_stride;
+	unsigned hmax = (img_height * tpg->perc_fill) / 100;
+	u8 *voutbuf;
+	u8 *vosdbuf = NULL;
+	unsigned y;
+	bool blend = dev->bitmap_out || dev->clipcount_out || dev->fbuf_out_flags;
+	/* Coarse scaling with Bresenham */
+	unsigned vid_out_int_part;
+	unsigned vid_out_fract_part;
+	unsigned vid_out_y = 0;
+	unsigned vid_out_error = 0;
+	unsigned vid_overlay_int_part = 0;
+	unsigned vid_overlay_fract_part = 0;
+	unsigned vid_overlay_y = 0;
+	unsigned vid_overlay_error = 0;
+	unsigned vid_cap_left = tpg_hdiv(tpg, p, dev->loop_vid_cap.left);
+	unsigned vid_cap_right;
+	bool quick;
+
+	vid_out_int_part = dev->loop_vid_out.height / dev->loop_vid_cap.height;
+	vid_out_fract_part = dev->loop_vid_out.height % dev->loop_vid_cap.height;
+
+	if (!list_empty(&dev->vid_out_active))
+		vid_out_buf = list_entry(dev->vid_out_active.next,
+					 struct vivid_buffer, list);
+	if (vid_out_buf == NULL)
+		return -ENODATA;
+
+	vid_cap_buf->vb.field = vid_out_buf->vb.field;
+
+	voutbuf = plane_vaddr(tpg, vid_out_buf, p,
+			      dev->bytesperline_out, dev->fmt_out_rect.height);
+	if (p < dev->fmt_out->buffers)
+		voutbuf += vid_out_buf->vb.vb2_buf.planes[p].data_offset;
+	voutbuf += tpg_hdiv(tpg, p, dev->loop_vid_out.left) +
+		(dev->loop_vid_out.top / vdiv) * stride_out;
+	vcapbuf += tpg_hdiv(tpg, p, dev->compose_cap.left) +
+		(dev->compose_cap.top / vdiv) * stride_cap;
+
+	if (dev->loop_vid_copy.width == 0 || dev->loop_vid_copy.height == 0) {
+		/*
+		 * If there is nothing to copy, then just fill the capture window
+		 * with black.
+		 */
+		for (y = 0; y < hmax / vdiv; y++, vcapbuf += stride_cap)
+			memcpy(vcapbuf, tpg->black_line[p], img_width);
+		return 0;
+	}
+
+	if (dev->overlay_out_enabled &&
+	    dev->loop_vid_overlay.width && dev->loop_vid_overlay.height) {
+		vosdbuf = dev->video_vbase;
+		vosdbuf += (dev->loop_fb_copy.left * twopixsize) / 2 +
+			   dev->loop_fb_copy.top * stride_osd;
+		vid_overlay_int_part = dev->loop_vid_overlay.height /
+				       dev->loop_vid_overlay_cap.height;
+		vid_overlay_fract_part = dev->loop_vid_overlay.height %
+					 dev->loop_vid_overlay_cap.height;
+	}
+
+	vid_cap_right = tpg_hdiv(tpg, p, dev->loop_vid_cap.left + dev->loop_vid_cap.width);
+	/* quick is true if no video scaling is needed */
+	quick = dev->loop_vid_out.width == dev->loop_vid_cap.width;
+
+	dev->cur_scaled_line = dev->loop_vid_out.height;
+	for (y = 0; y < hmax; y += vdiv, vcapbuf += stride_cap) {
+		/* osdline is true if this line requires overlay blending */
+		bool osdline = vosdbuf && y >= dev->loop_vid_overlay_cap.top &&
+			  y < dev->loop_vid_overlay_cap.top + dev->loop_vid_overlay_cap.height;
+
+		/*
+		 * If this line of the capture buffer doesn't get any video, then
+		 * just fill with black.
+		 */
+		if (y < dev->loop_vid_cap.top ||
+		    y >= dev->loop_vid_cap.top + dev->loop_vid_cap.height) {
+			memcpy(vcapbuf, tpg->black_line[p], img_width);
+			continue;
+		}
+
+		/* fill the left border with black */
+		if (dev->loop_vid_cap.left)
+			memcpy(vcapbuf, tpg->black_line[p], vid_cap_left);
+
+		/* fill the right border with black */
+		if (vid_cap_right < img_width)
+			memcpy(vcapbuf + vid_cap_right, tpg->black_line[p],
+				img_width - vid_cap_right);
+
+		if (quick && !osdline) {
+			memcpy(vcapbuf + vid_cap_left,
+			       voutbuf + vid_out_y * stride_out,
+			       tpg_hdiv(tpg, p, dev->loop_vid_cap.width));
+			goto update_vid_out_y;
+		}
+		if (dev->cur_scaled_line == vid_out_y) {
+			memcpy(vcapbuf + vid_cap_left, dev->scaled_line,
+			       tpg_hdiv(tpg, p, dev->loop_vid_cap.width));
+			goto update_vid_out_y;
+		}
+		if (!osdline) {
+			scale_line(voutbuf + vid_out_y * stride_out, dev->scaled_line,
+				tpg_hdiv(tpg, p, dev->loop_vid_out.width),
+				tpg_hdiv(tpg, p, dev->loop_vid_cap.width),
+				tpg_g_twopixelsize(tpg, p));
+		} else {
+			/*
+			 * Offset in bytes within loop_vid_copy to the start of the
+			 * loop_vid_overlay rectangle.
+			 */
+			unsigned offset =
+				((dev->loop_vid_overlay.left - dev->loop_vid_copy.left) *
+				 twopixsize) / 2;
+			u8 *osd = vosdbuf + vid_overlay_y * stride_osd;
+
+			scale_line(voutbuf + vid_out_y * stride_out, dev->blended_line,
+				dev->loop_vid_out.width, dev->loop_vid_copy.width,
+				tpg_g_twopixelsize(tpg, p));
+			if (blend)
+				blend_line(dev, vid_overlay_y + dev->loop_vid_overlay.top,
+					   dev->loop_vid_overlay.left,
+					   dev->blended_line + offset, osd,
+					   dev->loop_vid_overlay.width, twopixsize / 2);
+			else
+				memcpy(dev->blended_line + offset,
+				       osd, (dev->loop_vid_overlay.width * twopixsize) / 2);
+			scale_line(dev->blended_line, dev->scaled_line,
+					dev->loop_vid_copy.width, dev->loop_vid_cap.width,
+					tpg_g_twopixelsize(tpg, p));
+		}
+		dev->cur_scaled_line = vid_out_y;
+		memcpy(vcapbuf + vid_cap_left, dev->scaled_line,
+		       tpg_hdiv(tpg, p, dev->loop_vid_cap.width));
+
+update_vid_out_y:
+		if (osdline) {
+			vid_overlay_y += vid_overlay_int_part;
+			vid_overlay_error += vid_overlay_fract_part;
+			if (vid_overlay_error >= dev->loop_vid_overlay_cap.height) {
+				vid_overlay_error -= dev->loop_vid_overlay_cap.height;
+				vid_overlay_y++;
+			}
+		}
+		vid_out_y += vid_out_int_part;
+		vid_out_error += vid_out_fract_part;
+		if (vid_out_error >= dev->loop_vid_cap.height / vdiv) {
+			vid_out_error -= dev->loop_vid_cap.height / vdiv;
+			vid_out_y++;
+		}
+	}
+
+	if (!blank)
+		return 0;
+	for (; y < img_height; y += vdiv, vcapbuf += stride_cap)
+		memcpy(vcapbuf, tpg->contrast_line[p], img_width);
+	return 0;
+}
+
+static void vivid_fillbuff(struct vivid_dev *dev, struct vivid_buffer *buf)
+{
+	struct tpg_data *tpg = &dev->tpg;
+	unsigned factor = V4L2_FIELD_HAS_T_OR_B(dev->field_cap) ? 2 : 1;
+	unsigned line_height = 16 / factor;
+	bool is_tv = vivid_is_sdtv_cap(dev);
+	bool is_60hz = is_tv && (dev->std_cap[dev->input] & V4L2_STD_525_60);
+	unsigned p;
+	int line = 1;
+	u8 *basep[TPG_MAX_PLANES][2];
+	unsigned ms;
+	char str[100];
+	s32 gain;
+	bool is_loop = false;
+
+	if (dev->loop_video && dev->can_loop_video &&
+		((vivid_is_svid_cap(dev) &&
+		!VIVID_INVALID_SIGNAL(dev->std_signal_mode[dev->input])) ||
+		(vivid_is_hdmi_cap(dev) &&
+		!VIVID_INVALID_SIGNAL(dev->dv_timings_signal_mode[dev->input]))))
+		is_loop = true;
+
+	buf->vb.sequence = dev->vid_cap_seq_count;
+	if (dev->field_cap == V4L2_FIELD_ALTERNATE) {
+		/*
+		 * 60 Hz standards start with the bottom field, 50 Hz standards
+		 * with the top field. So if the 0-based seq_count is even,
+		 * then the field is TOP for 50 Hz and BOTTOM for 60 Hz
+		 * standards.
+		 */
+		buf->vb.field = ((dev->vid_cap_seq_count & 1) ^ is_60hz) ?
+			V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP;
+		/*
+		 * The sequence counter counts frames, not fields. So divide
+		 * by two.
+		 */
+		buf->vb.sequence /= 2;
+	} else {
+		buf->vb.field = dev->field_cap;
+	}
+	tpg_s_field(tpg, buf->vb.field,
+		    dev->field_cap == V4L2_FIELD_ALTERNATE);
+	tpg_s_perc_fill_blank(tpg, dev->must_blank[buf->vb.vb2_buf.index]);
+
+	vivid_precalc_copy_rects(dev);
+
+	for (p = 0; p < tpg_g_planes(tpg); p++) {
+		void *vbuf = plane_vaddr(tpg, buf, p,
+					 tpg->bytesperline, tpg->buf_height);
+
+		/*
+		 * The first plane of a multiplanar format has a non-zero
+		 * data_offset. This helps testing whether the application
+		 * correctly supports non-zero data offsets.
+		 */
+		if (p < tpg_g_buffers(tpg) && dev->fmt_cap->data_offset[p]) {
+			memset(vbuf, dev->fmt_cap->data_offset[p] & 0xff,
+			       dev->fmt_cap->data_offset[p]);
+			vbuf += dev->fmt_cap->data_offset[p];
+		}
+		tpg_calc_text_basep(tpg, basep, p, vbuf);
+		if (!is_loop || vivid_copy_buffer(dev, p, vbuf, buf))
+			tpg_fill_plane_buffer(tpg, vivid_get_std_cap(dev),
+					p, vbuf);
+	}
+	dev->must_blank[buf->vb.vb2_buf.index] = false;
+
+	/* Updates stream time, only update at the start of a new frame. */
+	if (dev->field_cap != V4L2_FIELD_ALTERNATE ||
+			(dev->vid_cap_seq_count & 1) == 0)
+		dev->ms_vid_cap =
+			jiffies_to_msecs(jiffies - dev->jiffies_vid_cap);
+
+	ms = dev->ms_vid_cap;
+	if (dev->osd_mode <= 1) {
+		snprintf(str, sizeof(str), " %02d:%02d:%02d:%03d %u%s",
+				(ms / (60 * 60 * 1000)) % 24,
+				(ms / (60 * 1000)) % 60,
+				(ms / 1000) % 60,
+				ms % 1000,
+				buf->vb.sequence,
+				(dev->field_cap == V4L2_FIELD_ALTERNATE) ?
+					(buf->vb.field == V4L2_FIELD_TOP ?
+					 " top" : " bottom") : "");
+		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
+	}
+	if (dev->osd_mode == 0) {
+		snprintf(str, sizeof(str), " %dx%d, input %d ",
+				dev->src_rect.width, dev->src_rect.height, dev->input);
+		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
+
+		gain = v4l2_ctrl_g_ctrl(dev->gain);
+		mutex_lock(dev->ctrl_hdl_user_vid.lock);
+		snprintf(str, sizeof(str),
+			" brightness %3d, contrast %3d, saturation %3d, hue %d ",
+			dev->brightness->cur.val,
+			dev->contrast->cur.val,
+			dev->saturation->cur.val,
+			dev->hue->cur.val);
+		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
+		snprintf(str, sizeof(str),
+			" autogain %d, gain %3d, alpha 0x%02x ",
+			dev->autogain->cur.val, gain, dev->alpha->cur.val);
+		mutex_unlock(dev->ctrl_hdl_user_vid.lock);
+		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
+		mutex_lock(dev->ctrl_hdl_user_aud.lock);
+		snprintf(str, sizeof(str),
+			" volume %3d, mute %d ",
+			dev->volume->cur.val, dev->mute->cur.val);
+		mutex_unlock(dev->ctrl_hdl_user_aud.lock);
+		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
+		mutex_lock(dev->ctrl_hdl_user_gen.lock);
+		snprintf(str, sizeof(str), " int32 %d, int64 %lld, bitmask %08x ",
+			dev->int32->cur.val,
+			*dev->int64->p_cur.p_s64,
+			dev->bitmask->cur.val);
+		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
+		snprintf(str, sizeof(str), " boolean %d, menu %s, string \"%s\" ",
+			dev->boolean->cur.val,
+			dev->menu->qmenu[dev->menu->cur.val],
+			dev->string->p_cur.p_char);
+		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
+		snprintf(str, sizeof(str), " integer_menu %lld, value %d ",
+			dev->int_menu->qmenu_int[dev->int_menu->cur.val],
+			dev->int_menu->cur.val);
+		mutex_unlock(dev->ctrl_hdl_user_gen.lock);
+		tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
+		if (dev->button_pressed) {
+			dev->button_pressed--;
+			snprintf(str, sizeof(str), " button pressed!");
+			tpg_gen_text(tpg, basep, line++ * line_height, 16, str);
+		}
+		if (dev->osd[0]) {
+			if (vivid_is_hdmi_cap(dev)) {
+				snprintf(str, sizeof(str),
+					 " OSD \"%s\"", dev->osd);
+				tpg_gen_text(tpg, basep, line++ * line_height,
+					     16, str);
+			}
+			if (dev->osd_jiffies &&
+			    time_is_before_jiffies(dev->osd_jiffies + 5 * HZ)) {
+				dev->osd[0] = 0;
+				dev->osd_jiffies = 0;
+			}
+		}
+	}
+}
+
+/*
+ * Return true if this pixel coordinate is a valid video pixel.
+ */
+static bool valid_pix(struct vivid_dev *dev, int win_y, int win_x, int fb_y, int fb_x)
+{
+	int i;
+
+	if (dev->bitmap_cap) {
+		/*
+		 * Only if the corresponding bit in the bitmap is set can
+		 * the video pixel be shown. Coordinates are relative to
+		 * the overlay window set by VIDIOC_S_FMT.
+		 */
+		const u8 *p = dev->bitmap_cap;
+		unsigned stride = (dev->compose_cap.width + 7) / 8;
+
+		if (!(p[stride * win_y + win_x / 8] & (1 << (win_x & 7))))
+			return false;
+	}
+
+	for (i = 0; i < dev->clipcount_cap; i++) {
+		/*
+		 * Only if the framebuffer coordinate is not in any of the
+		 * clip rectangles will be video pixel be shown.
+		 */
+		struct v4l2_rect *r = &dev->clips_cap[i].c;
+
+		if (fb_y >= r->top && fb_y < r->top + r->height &&
+		    fb_x >= r->left && fb_x < r->left + r->width)
+			return false;
+	}
+	return true;
+}
+
+/*
+ * Draw the image into the overlay buffer.
+ * Note that the combination of overlay and multiplanar is not supported.
+ */
+static void vivid_overlay(struct vivid_dev *dev, struct vivid_buffer *buf)
+{
+	struct tpg_data *tpg = &dev->tpg;
+	unsigned pixsize = tpg_g_twopixelsize(tpg, 0) / 2;
+	void *vbase = dev->fb_vbase_cap;
+	void *vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+	unsigned img_width = dev->compose_cap.width;
+	unsigned img_height = dev->compose_cap.height;
+	unsigned stride = tpg->bytesperline[0];
+	/* if quick is true, then valid_pix() doesn't have to be called */
+	bool quick = dev->bitmap_cap == NULL && dev->clipcount_cap == 0;
+	int x, y, w, out_x = 0;
+
+	/*
+	 * Overlay support is only supported for formats that have a twopixelsize
+	 * that's >= 2. Warn and bail out if that's not the case.
+	 */
+	if (WARN_ON(pixsize == 0))
+		return;
+	if ((dev->overlay_cap_field == V4L2_FIELD_TOP ||
+	     dev->overlay_cap_field == V4L2_FIELD_BOTTOM) &&
+	    dev->overlay_cap_field != buf->vb.field)
+		return;
+
+	vbuf += dev->compose_cap.left * pixsize + dev->compose_cap.top * stride;
+	x = dev->overlay_cap_left;
+	w = img_width;
+	if (x < 0) {
+		out_x = -x;
+		w = w - out_x;
+		x = 0;
+	} else {
+		w = dev->fb_cap.fmt.width - x;
+		if (w > img_width)
+			w = img_width;
+	}
+	if (w <= 0)
+		return;
+	if (dev->overlay_cap_top >= 0)
+		vbase += dev->overlay_cap_top * dev->fb_cap.fmt.bytesperline;
+	for (y = dev->overlay_cap_top;
+	     y < dev->overlay_cap_top + (int)img_height;
+	     y++, vbuf += stride) {
+		int px;
+
+		if (y < 0 || y > dev->fb_cap.fmt.height)
+			continue;
+		if (quick) {
+			memcpy(vbase + x * pixsize,
+			       vbuf + out_x * pixsize, w * pixsize);
+			vbase += dev->fb_cap.fmt.bytesperline;
+			continue;
+		}
+		for (px = 0; px < w; px++) {
+			if (!valid_pix(dev, y - dev->overlay_cap_top,
+				       px + out_x, y, px + x))
+				continue;
+			memcpy(vbase + (px + x) * pixsize,
+			       vbuf + (px + out_x) * pixsize,
+			       pixsize);
+		}
+		vbase += dev->fb_cap.fmt.bytesperline;
+	}
+}
+
+static void vivid_cap_update_frame_period(struct vivid_dev *dev)
+{
+	u64 f_period;
+
+	f_period = (u64)dev->timeperframe_vid_cap.numerator * 1000000000;
+	if (WARN_ON(dev->timeperframe_vid_cap.denominator == 0))
+		dev->timeperframe_vid_cap.denominator = 1;
+	do_div(f_period, dev->timeperframe_vid_cap.denominator);
+	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
+		f_period >>= 1;
+	/*
+	 * If "End of Frame", then offset the exposure time by 0.9
+	 * of the frame period.
+	 */
+	dev->cap_frame_eof_offset = f_period * 9;
+	do_div(dev->cap_frame_eof_offset, 10);
+	dev->cap_frame_period = f_period;
+}
+
+static noinline_for_stack void vivid_thread_vid_cap_tick(struct vivid_dev *dev,
+							 int dropped_bufs)
+{
+	struct vivid_buffer *vid_cap_buf = NULL;
+	struct vivid_buffer *vbi_cap_buf = NULL;
+	struct vivid_buffer *meta_cap_buf = NULL;
+	u64 f_time = 0;
+
+	dprintk(dev, 1, "Video Capture Thread Tick\n");
+
+	while (dropped_bufs-- > 1)
+		tpg_update_mv_count(&dev->tpg,
+				dev->field_cap == V4L2_FIELD_NONE ||
+				dev->field_cap == V4L2_FIELD_ALTERNATE);
+
+	/* Drop a certain percentage of buffers. */
+	if (dev->perc_dropped_buffers &&
+	    prandom_u32_max(100) < dev->perc_dropped_buffers)
+		goto update_mv;
+
+	spin_lock(&dev->slock);
+	if (!list_empty(&dev->vid_cap_active)) {
+		vid_cap_buf = list_entry(dev->vid_cap_active.next, struct vivid_buffer, list);
+		list_del(&vid_cap_buf->list);
+	}
+	if (!list_empty(&dev->vbi_cap_active)) {
+		if (dev->field_cap != V4L2_FIELD_ALTERNATE ||
+		    (dev->vbi_cap_seq_count & 1)) {
+			vbi_cap_buf = list_entry(dev->vbi_cap_active.next,
+						 struct vivid_buffer, list);
+			list_del(&vbi_cap_buf->list);
+		}
+	}
+	if (!list_empty(&dev->meta_cap_active)) {
+		meta_cap_buf = list_entry(dev->meta_cap_active.next,
+					  struct vivid_buffer, list);
+		list_del(&meta_cap_buf->list);
+	}
+
+	spin_unlock(&dev->slock);
+
+	if (!vid_cap_buf && !vbi_cap_buf && !meta_cap_buf)
+		goto update_mv;
+
+	f_time = dev->cap_frame_period * dev->vid_cap_seq_count +
+		 dev->cap_stream_start + dev->time_wrap_offset;
+
+	if (vid_cap_buf) {
+		v4l2_ctrl_request_setup(vid_cap_buf->vb.vb2_buf.req_obj.req,
+					&dev->ctrl_hdl_vid_cap);
+		/* Fill buffer */
+		vivid_fillbuff(dev, vid_cap_buf);
+		dprintk(dev, 1, "filled buffer %d\n",
+			vid_cap_buf->vb.vb2_buf.index);
+
+		/* Handle overlay */
+		if (dev->overlay_cap_owner && dev->fb_cap.base &&
+			dev->fb_cap.fmt.pixelformat == dev->fmt_cap->fourcc)
+			vivid_overlay(dev, vid_cap_buf);
+
+		v4l2_ctrl_request_complete(vid_cap_buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_vid_cap);
+		vb2_buffer_done(&vid_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+		dprintk(dev, 2, "vid_cap buffer %d done\n",
+				vid_cap_buf->vb.vb2_buf.index);
+
+		vid_cap_buf->vb.vb2_buf.timestamp = f_time;
+		if (!dev->tstamp_src_is_soe)
+			vid_cap_buf->vb.vb2_buf.timestamp += dev->cap_frame_eof_offset;
+	}
+
+	if (vbi_cap_buf) {
+		u64 vbi_period;
+
+		v4l2_ctrl_request_setup(vbi_cap_buf->vb.vb2_buf.req_obj.req,
+					&dev->ctrl_hdl_vbi_cap);
+		if (dev->stream_sliced_vbi_cap)
+			vivid_sliced_vbi_cap_process(dev, vbi_cap_buf);
+		else
+			vivid_raw_vbi_cap_process(dev, vbi_cap_buf);
+		v4l2_ctrl_request_complete(vbi_cap_buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_vbi_cap);
+		vb2_buffer_done(&vbi_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+		dprintk(dev, 2, "vbi_cap %d done\n",
+				vbi_cap_buf->vb.vb2_buf.index);
+
+		/* If capturing a VBI, offset by 0.05 */
+		vbi_period = dev->cap_frame_period * 5;
+		do_div(vbi_period, 100);
+		vbi_cap_buf->vb.vb2_buf.timestamp = f_time + dev->cap_frame_eof_offset + vbi_period;
+	}
+
+	if (meta_cap_buf) {
+		v4l2_ctrl_request_setup(meta_cap_buf->vb.vb2_buf.req_obj.req,
+					&dev->ctrl_hdl_meta_cap);
+		vivid_meta_cap_fillbuff(dev, meta_cap_buf, f_time);
+		v4l2_ctrl_request_complete(meta_cap_buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_meta_cap);
+		vb2_buffer_done(&meta_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+		dprintk(dev, 2, "meta_cap %d done\n",
+			meta_cap_buf->vb.vb2_buf.index);
+		meta_cap_buf->vb.vb2_buf.timestamp = f_time + dev->cap_frame_eof_offset;
+	}
+
+	dev->dqbuf_error = false;
+
+update_mv:
+	/* Update the test pattern movement counters */
+	tpg_update_mv_count(&dev->tpg, dev->field_cap == V4L2_FIELD_NONE ||
+				       dev->field_cap == V4L2_FIELD_ALTERNATE);
+}
+
+static int vivid_thread_vid_cap(void *data)
+{
+	struct vivid_dev *dev = data;
+	u64 numerators_since_start;
+	u64 buffers_since_start;
+	u64 next_jiffies_since_start;
+	unsigned long jiffies_since_start;
+	unsigned long cur_jiffies;
+	unsigned wait_jiffies;
+	unsigned numerator;
+	unsigned denominator;
+	int dropped_bufs;
+
+	dprintk(dev, 1, "Video Capture Thread Start\n");
+
+	set_freezable();
+
+	/* Resets frame counters */
+	dev->cap_seq_offset = 0;
+	dev->cap_seq_count = 0;
+	dev->cap_seq_resync = false;
+	dev->jiffies_vid_cap = jiffies;
+	dev->cap_stream_start = ktime_get_ns();
+	vivid_cap_update_frame_period(dev);
+
+	for (;;) {
+		try_to_freeze();
+		if (kthread_should_stop())
+			break;
+
+		if (!mutex_trylock(&dev->mutex)) {
+			schedule_timeout_uninterruptible(1);
+			continue;
+		}
+
+		cur_jiffies = jiffies;
+		if (dev->cap_seq_resync) {
+			dev->jiffies_vid_cap = cur_jiffies;
+			dev->cap_seq_offset = dev->cap_seq_count + 1;
+			dev->cap_seq_count = 0;
+			dev->cap_stream_start += dev->cap_frame_period *
+						 dev->cap_seq_offset;
+			vivid_cap_update_frame_period(dev);
+			dev->cap_seq_resync = false;
+		}
+		numerator = dev->timeperframe_vid_cap.numerator;
+		denominator = dev->timeperframe_vid_cap.denominator;
+
+		if (dev->field_cap == V4L2_FIELD_ALTERNATE)
+			denominator *= 2;
+
+		/* Calculate the number of jiffies since we started streaming */
+		jiffies_since_start = cur_jiffies - dev->jiffies_vid_cap;
+		/* Get the number of buffers streamed since the start */
+		buffers_since_start = (u64)jiffies_since_start * denominator +
+				      (HZ * numerator) / 2;
+		do_div(buffers_since_start, HZ * numerator);
+
+		/*
+		 * After more than 0xf0000000 (rounded down to a multiple of
+		 * 'jiffies-per-day' to ease jiffies_to_msecs calculation)
+		 * jiffies have passed since we started streaming reset the
+		 * counters and keep track of the sequence offset.
+		 */
+		if (jiffies_since_start > JIFFIES_RESYNC) {
+			dev->jiffies_vid_cap = cur_jiffies;
+			dev->cap_seq_offset = buffers_since_start;
+			buffers_since_start = 0;
+		}
+		dropped_bufs = buffers_since_start + dev->cap_seq_offset - dev->cap_seq_count;
+		dev->cap_seq_count = buffers_since_start + dev->cap_seq_offset;
+		dev->vid_cap_seq_count = dev->cap_seq_count - dev->vid_cap_seq_start;
+		dev->vbi_cap_seq_count = dev->cap_seq_count - dev->vbi_cap_seq_start;
+		dev->meta_cap_seq_count = dev->cap_seq_count - dev->meta_cap_seq_start;
+
+		vivid_thread_vid_cap_tick(dev, dropped_bufs);
+
+		/*
+		 * Calculate the number of 'numerators' streamed since we started,
+		 * including the current buffer.
+		 */
+		numerators_since_start = ++buffers_since_start * numerator;
+
+		/* And the number of jiffies since we started */
+		jiffies_since_start = jiffies - dev->jiffies_vid_cap;
+
+		mutex_unlock(&dev->mutex);
+
+		/*
+		 * Calculate when that next buffer is supposed to start
+		 * in jiffies since we started streaming.
+		 */
+		next_jiffies_since_start = numerators_since_start * HZ +
+					   denominator / 2;
+		do_div(next_jiffies_since_start, denominator);
+		/* If it is in the past, then just schedule asap */
+		if (next_jiffies_since_start < jiffies_since_start)
+			next_jiffies_since_start = jiffies_since_start;
+
+		wait_jiffies = next_jiffies_since_start - jiffies_since_start;
+		schedule_timeout_interruptible(wait_jiffies ? wait_jiffies : 1);
+	}
+	dprintk(dev, 1, "Video Capture Thread End\n");
+	return 0;
+}
+
+static void vivid_grab_controls(struct vivid_dev *dev, bool grab)
+{
+	v4l2_ctrl_grab(dev->ctrl_has_crop_cap, grab);
+	v4l2_ctrl_grab(dev->ctrl_has_compose_cap, grab);
+	v4l2_ctrl_grab(dev->ctrl_has_scaler_cap, grab);
+}
+
+int vivid_start_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming)
+{
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->kthread_vid_cap) {
+		u32 seq_count = dev->cap_seq_count + dev->seq_wrap * 128;
+
+		if (pstreaming == &dev->vid_cap_streaming)
+			dev->vid_cap_seq_start = seq_count;
+		else if (pstreaming == &dev->vbi_cap_streaming)
+			dev->vbi_cap_seq_start = seq_count;
+		else
+			dev->meta_cap_seq_start = seq_count;
+		*pstreaming = true;
+		return 0;
+	}
+
+	/* Resets frame counters */
+	tpg_init_mv_count(&dev->tpg);
+
+	dev->vid_cap_seq_start = dev->seq_wrap * 128;
+	dev->vbi_cap_seq_start = dev->seq_wrap * 128;
+	dev->meta_cap_seq_start = dev->seq_wrap * 128;
+
+	dev->kthread_vid_cap = kthread_run(vivid_thread_vid_cap, dev,
+			"%s-vid-cap", dev->v4l2_dev.name);
+
+	if (IS_ERR(dev->kthread_vid_cap)) {
+		int err = PTR_ERR(dev->kthread_vid_cap);
+
+		dev->kthread_vid_cap = NULL;
+		v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n");
+		return err;
+	}
+	*pstreaming = true;
+	vivid_grab_controls(dev, true);
+
+	dprintk(dev, 1, "returning from %s\n", __func__);
+	return 0;
+}
+
+void vivid_stop_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming)
+{
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->kthread_vid_cap == NULL)
+		return;
+
+	*pstreaming = false;
+	if (pstreaming == &dev->vid_cap_streaming) {
+		/* Release all active buffers */
+		while (!list_empty(&dev->vid_cap_active)) {
+			struct vivid_buffer *buf;
+
+			buf = list_entry(dev->vid_cap_active.next,
+					 struct vivid_buffer, list);
+			list_del(&buf->list);
+			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
+						   &dev->ctrl_hdl_vid_cap);
+			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+			dprintk(dev, 2, "vid_cap buffer %d done\n",
+				buf->vb.vb2_buf.index);
+		}
+	}
+
+	if (pstreaming == &dev->vbi_cap_streaming) {
+		while (!list_empty(&dev->vbi_cap_active)) {
+			struct vivid_buffer *buf;
+
+			buf = list_entry(dev->vbi_cap_active.next,
+					 struct vivid_buffer, list);
+			list_del(&buf->list);
+			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
+						   &dev->ctrl_hdl_vbi_cap);
+			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+			dprintk(dev, 2, "vbi_cap buffer %d done\n",
+				buf->vb.vb2_buf.index);
+		}
+	}
+
+	if (pstreaming == &dev->meta_cap_streaming) {
+		while (!list_empty(&dev->meta_cap_active)) {
+			struct vivid_buffer *buf;
+
+			buf = list_entry(dev->meta_cap_active.next,
+					 struct vivid_buffer, list);
+			list_del(&buf->list);
+			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
+						   &dev->ctrl_hdl_meta_cap);
+			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+			dprintk(dev, 2, "meta_cap buffer %d done\n",
+				buf->vb.vb2_buf.index);
+		}
+	}
+
+	if (dev->vid_cap_streaming || dev->vbi_cap_streaming ||
+	    dev->meta_cap_streaming)
+		return;
+
+	/* shutdown control thread */
+	vivid_grab_controls(dev, false);
+	kthread_stop(dev->kthread_vid_cap);
+	dev->kthread_vid_cap = NULL;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-kthread-cap.h b/drivers/media/test-drivers/vivid/vivid-kthread-cap.h
new file mode 100644
index 000000000000..0f43015306d6
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-kthread-cap.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-kthread-cap.h - video/vbi capture thread support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_KTHREAD_CAP_H_
+#define _VIVID_KTHREAD_CAP_H_
+
+int vivid_start_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming);
+void vivid_stop_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-kthread-out.c b/drivers/media/test-drivers/vivid/vivid-kthread-out.c
new file mode 100644
index 000000000000..6780687978f9
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-kthread-out.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-kthread-out.h - video/vbi output thread support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/font.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/random.h>
+#include <linux/v4l2-dv-timings.h>
+#include <asm/div64.h>
+#include <media/videobuf2-vmalloc.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
+
+#include "vivid-core.h"
+#include "vivid-vid-common.h"
+#include "vivid-vid-cap.h"
+#include "vivid-vid-out.h"
+#include "vivid-radio-common.h"
+#include "vivid-radio-rx.h"
+#include "vivid-radio-tx.h"
+#include "vivid-sdr-cap.h"
+#include "vivid-vbi-cap.h"
+#include "vivid-vbi-out.h"
+#include "vivid-osd.h"
+#include "vivid-ctrls.h"
+#include "vivid-kthread-out.h"
+#include "vivid-meta-out.h"
+
+static void vivid_thread_vid_out_tick(struct vivid_dev *dev)
+{
+	struct vivid_buffer *vid_out_buf = NULL;
+	struct vivid_buffer *vbi_out_buf = NULL;
+	struct vivid_buffer *meta_out_buf = NULL;
+
+	dprintk(dev, 1, "Video Output Thread Tick\n");
+
+	/* Drop a certain percentage of buffers. */
+	if (dev->perc_dropped_buffers &&
+	    prandom_u32_max(100) < dev->perc_dropped_buffers)
+		return;
+
+	spin_lock(&dev->slock);
+	/*
+	 * Only dequeue buffer if there is at least one more pending.
+	 * This makes video loopback possible.
+	 */
+	if (!list_empty(&dev->vid_out_active) &&
+	    !list_is_singular(&dev->vid_out_active)) {
+		vid_out_buf = list_entry(dev->vid_out_active.next,
+					 struct vivid_buffer, list);
+		list_del(&vid_out_buf->list);
+	}
+	if (!list_empty(&dev->vbi_out_active) &&
+	    (dev->field_out != V4L2_FIELD_ALTERNATE ||
+	     (dev->vbi_out_seq_count & 1))) {
+		vbi_out_buf = list_entry(dev->vbi_out_active.next,
+					 struct vivid_buffer, list);
+		list_del(&vbi_out_buf->list);
+	}
+	if (!list_empty(&dev->meta_out_active)) {
+		meta_out_buf = list_entry(dev->meta_out_active.next,
+					  struct vivid_buffer, list);
+		list_del(&meta_out_buf->list);
+	}
+	spin_unlock(&dev->slock);
+
+	if (!vid_out_buf && !vbi_out_buf && !meta_out_buf)
+		return;
+
+	if (vid_out_buf) {
+		v4l2_ctrl_request_setup(vid_out_buf->vb.vb2_buf.req_obj.req,
+					&dev->ctrl_hdl_vid_out);
+		v4l2_ctrl_request_complete(vid_out_buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_vid_out);
+		vid_out_buf->vb.sequence = dev->vid_out_seq_count;
+		if (dev->field_out == V4L2_FIELD_ALTERNATE) {
+			/*
+			 * The sequence counter counts frames, not fields.
+			 * So divide by two.
+			 */
+			vid_out_buf->vb.sequence /= 2;
+		}
+		vid_out_buf->vb.vb2_buf.timestamp =
+			ktime_get_ns() + dev->time_wrap_offset;
+		vb2_buffer_done(&vid_out_buf->vb.vb2_buf, dev->dqbuf_error ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+		dprintk(dev, 2, "vid_out buffer %d done\n",
+			vid_out_buf->vb.vb2_buf.index);
+	}
+
+	if (vbi_out_buf) {
+		v4l2_ctrl_request_setup(vbi_out_buf->vb.vb2_buf.req_obj.req,
+					&dev->ctrl_hdl_vbi_out);
+		v4l2_ctrl_request_complete(vbi_out_buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_vbi_out);
+		if (dev->stream_sliced_vbi_out)
+			vivid_sliced_vbi_out_process(dev, vbi_out_buf);
+
+		vbi_out_buf->vb.sequence = dev->vbi_out_seq_count;
+		vbi_out_buf->vb.vb2_buf.timestamp =
+			ktime_get_ns() + dev->time_wrap_offset;
+		vb2_buffer_done(&vbi_out_buf->vb.vb2_buf, dev->dqbuf_error ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+		dprintk(dev, 2, "vbi_out buffer %d done\n",
+			vbi_out_buf->vb.vb2_buf.index);
+	}
+	if (meta_out_buf) {
+		v4l2_ctrl_request_setup(meta_out_buf->vb.vb2_buf.req_obj.req,
+					&dev->ctrl_hdl_meta_out);
+		v4l2_ctrl_request_complete(meta_out_buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_meta_out);
+		vivid_meta_out_process(dev, meta_out_buf);
+		meta_out_buf->vb.sequence = dev->meta_out_seq_count;
+		meta_out_buf->vb.vb2_buf.timestamp =
+			ktime_get_ns() + dev->time_wrap_offset;
+		vb2_buffer_done(&meta_out_buf->vb.vb2_buf, dev->dqbuf_error ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+		dprintk(dev, 2, "meta_out buffer %d done\n",
+			meta_out_buf->vb.vb2_buf.index);
+	}
+
+	dev->dqbuf_error = false;
+}
+
+static int vivid_thread_vid_out(void *data)
+{
+	struct vivid_dev *dev = data;
+	u64 numerators_since_start;
+	u64 buffers_since_start;
+	u64 next_jiffies_since_start;
+	unsigned long jiffies_since_start;
+	unsigned long cur_jiffies;
+	unsigned wait_jiffies;
+	unsigned numerator;
+	unsigned denominator;
+
+	dprintk(dev, 1, "Video Output Thread Start\n");
+
+	set_freezable();
+
+	/* Resets frame counters */
+	dev->out_seq_offset = 0;
+	if (dev->seq_wrap)
+		dev->out_seq_count = 0xffffff80U;
+	dev->jiffies_vid_out = jiffies;
+	dev->vid_out_seq_start = dev->vbi_out_seq_start = 0;
+	dev->meta_out_seq_start = 0;
+	dev->out_seq_resync = false;
+
+	for (;;) {
+		try_to_freeze();
+		if (kthread_should_stop())
+			break;
+
+		if (!mutex_trylock(&dev->mutex)) {
+			schedule_timeout_uninterruptible(1);
+			continue;
+		}
+
+		cur_jiffies = jiffies;
+		if (dev->out_seq_resync) {
+			dev->jiffies_vid_out = cur_jiffies;
+			dev->out_seq_offset = dev->out_seq_count + 1;
+			dev->out_seq_count = 0;
+			dev->out_seq_resync = false;
+		}
+		numerator = dev->timeperframe_vid_out.numerator;
+		denominator = dev->timeperframe_vid_out.denominator;
+
+		if (dev->field_out == V4L2_FIELD_ALTERNATE)
+			denominator *= 2;
+
+		/* Calculate the number of jiffies since we started streaming */
+		jiffies_since_start = cur_jiffies - dev->jiffies_vid_out;
+		/* Get the number of buffers streamed since the start */
+		buffers_since_start = (u64)jiffies_since_start * denominator +
+				      (HZ * numerator) / 2;
+		do_div(buffers_since_start, HZ * numerator);
+
+		/*
+		 * After more than 0xf0000000 (rounded down to a multiple of
+		 * 'jiffies-per-day' to ease jiffies_to_msecs calculation)
+		 * jiffies have passed since we started streaming reset the
+		 * counters and keep track of the sequence offset.
+		 */
+		if (jiffies_since_start > JIFFIES_RESYNC) {
+			dev->jiffies_vid_out = cur_jiffies;
+			dev->out_seq_offset = buffers_since_start;
+			buffers_since_start = 0;
+		}
+		dev->out_seq_count = buffers_since_start + dev->out_seq_offset;
+		dev->vid_out_seq_count = dev->out_seq_count - dev->vid_out_seq_start;
+		dev->vbi_out_seq_count = dev->out_seq_count - dev->vbi_out_seq_start;
+		dev->meta_out_seq_count = dev->out_seq_count - dev->meta_out_seq_start;
+
+		vivid_thread_vid_out_tick(dev);
+		mutex_unlock(&dev->mutex);
+
+		/*
+		 * Calculate the number of 'numerators' streamed since we started,
+		 * not including the current buffer.
+		 */
+		numerators_since_start = buffers_since_start * numerator;
+
+		/* And the number of jiffies since we started */
+		jiffies_since_start = jiffies - dev->jiffies_vid_out;
+
+		/* Increase by the 'numerator' of one buffer */
+		numerators_since_start += numerator;
+		/*
+		 * Calculate when that next buffer is supposed to start
+		 * in jiffies since we started streaming.
+		 */
+		next_jiffies_since_start = numerators_since_start * HZ +
+					   denominator / 2;
+		do_div(next_jiffies_since_start, denominator);
+		/* If it is in the past, then just schedule asap */
+		if (next_jiffies_since_start < jiffies_since_start)
+			next_jiffies_since_start = jiffies_since_start;
+
+		wait_jiffies = next_jiffies_since_start - jiffies_since_start;
+		schedule_timeout_interruptible(wait_jiffies ? wait_jiffies : 1);
+	}
+	dprintk(dev, 1, "Video Output Thread End\n");
+	return 0;
+}
+
+static void vivid_grab_controls(struct vivid_dev *dev, bool grab)
+{
+	v4l2_ctrl_grab(dev->ctrl_has_crop_out, grab);
+	v4l2_ctrl_grab(dev->ctrl_has_compose_out, grab);
+	v4l2_ctrl_grab(dev->ctrl_has_scaler_out, grab);
+	v4l2_ctrl_grab(dev->ctrl_tx_mode, grab);
+	v4l2_ctrl_grab(dev->ctrl_tx_rgb_range, grab);
+}
+
+int vivid_start_generating_vid_out(struct vivid_dev *dev, bool *pstreaming)
+{
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->kthread_vid_out) {
+		u32 seq_count = dev->out_seq_count + dev->seq_wrap * 128;
+
+		if (pstreaming == &dev->vid_out_streaming)
+			dev->vid_out_seq_start = seq_count;
+		else if (pstreaming == &dev->vbi_out_streaming)
+			dev->vbi_out_seq_start = seq_count;
+		else
+			dev->meta_out_seq_start = seq_count;
+		*pstreaming = true;
+		return 0;
+	}
+
+	/* Resets frame counters */
+	dev->jiffies_vid_out = jiffies;
+	dev->vid_out_seq_start = dev->seq_wrap * 128;
+	dev->vbi_out_seq_start = dev->seq_wrap * 128;
+	dev->meta_out_seq_start = dev->seq_wrap * 128;
+
+	dev->kthread_vid_out = kthread_run(vivid_thread_vid_out, dev,
+			"%s-vid-out", dev->v4l2_dev.name);
+
+	if (IS_ERR(dev->kthread_vid_out)) {
+		int err = PTR_ERR(dev->kthread_vid_out);
+
+		dev->kthread_vid_out = NULL;
+		v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n");
+		return err;
+	}
+	*pstreaming = true;
+	vivid_grab_controls(dev, true);
+
+	dprintk(dev, 1, "returning from %s\n", __func__);
+	return 0;
+}
+
+void vivid_stop_generating_vid_out(struct vivid_dev *dev, bool *pstreaming)
+{
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->kthread_vid_out == NULL)
+		return;
+
+	*pstreaming = false;
+	if (pstreaming == &dev->vid_out_streaming) {
+		/* Release all active buffers */
+		while (!list_empty(&dev->vid_out_active)) {
+			struct vivid_buffer *buf;
+
+			buf = list_entry(dev->vid_out_active.next,
+					 struct vivid_buffer, list);
+			list_del(&buf->list);
+			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
+						   &dev->ctrl_hdl_vid_out);
+			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+			dprintk(dev, 2, "vid_out buffer %d done\n",
+				buf->vb.vb2_buf.index);
+		}
+	}
+
+	if (pstreaming == &dev->vbi_out_streaming) {
+		while (!list_empty(&dev->vbi_out_active)) {
+			struct vivid_buffer *buf;
+
+			buf = list_entry(dev->vbi_out_active.next,
+					 struct vivid_buffer, list);
+			list_del(&buf->list);
+			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
+						   &dev->ctrl_hdl_vbi_out);
+			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+			dprintk(dev, 2, "vbi_out buffer %d done\n",
+				buf->vb.vb2_buf.index);
+		}
+	}
+
+	if (pstreaming == &dev->meta_out_streaming) {
+		while (!list_empty(&dev->meta_out_active)) {
+			struct vivid_buffer *buf;
+
+			buf = list_entry(dev->meta_out_active.next,
+					 struct vivid_buffer, list);
+			list_del(&buf->list);
+			v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
+						   &dev->ctrl_hdl_meta_out);
+			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+			dprintk(dev, 2, "meta_out buffer %d done\n",
+				buf->vb.vb2_buf.index);
+		}
+	}
+
+	if (dev->vid_out_streaming || dev->vbi_out_streaming ||
+	    dev->meta_out_streaming)
+		return;
+
+	/* shutdown control thread */
+	vivid_grab_controls(dev, false);
+	kthread_stop(dev->kthread_vid_out);
+	dev->kthread_vid_out = NULL;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-kthread-out.h b/drivers/media/test-drivers/vivid/vivid-kthread-out.h
new file mode 100644
index 000000000000..d5bcf44bbaca
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-kthread-out.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-kthread-out.h - video/vbi output thread support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_KTHREAD_OUT_H_
+#define _VIVID_KTHREAD_OUT_H_
+
+int vivid_start_generating_vid_out(struct vivid_dev *dev, bool *pstreaming);
+void vivid_stop_generating_vid_out(struct vivid_dev *dev, bool *pstreaming);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-kthread-touch.c b/drivers/media/test-drivers/vivid/vivid-kthread-touch.c
new file mode 100644
index 000000000000..674507b5ccb5
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-kthread-touch.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-kthread-touch.c - touch capture thread support functions.
+ *
+ */
+
+#include <linux/freezer.h>
+#include "vivid-core.h"
+#include "vivid-kthread-touch.h"
+#include "vivid-touch-cap.h"
+
+static noinline_for_stack void vivid_thread_tch_cap_tick(struct vivid_dev *dev,
+							 int dropped_bufs)
+{
+	struct vivid_buffer *tch_cap_buf = NULL;
+
+	spin_lock(&dev->slock);
+	if (!list_empty(&dev->touch_cap_active)) {
+		tch_cap_buf = list_entry(dev->touch_cap_active.next,
+					 struct vivid_buffer, list);
+		list_del(&tch_cap_buf->list);
+	}
+
+	spin_unlock(&dev->slock);
+
+	if (tch_cap_buf) {
+		v4l2_ctrl_request_setup(tch_cap_buf->vb.vb2_buf.req_obj.req,
+					&dev->ctrl_hdl_touch_cap);
+
+		vivid_fillbuff_tch(dev, tch_cap_buf);
+		v4l2_ctrl_request_complete(tch_cap_buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_touch_cap);
+		vb2_buffer_done(&tch_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+		dprintk(dev, 2, "touch_cap buffer %d done\n",
+			tch_cap_buf->vb.vb2_buf.index);
+
+		tch_cap_buf->vb.vb2_buf.timestamp = ktime_get_ns() + dev->time_wrap_offset;
+	}
+	dev->dqbuf_error = false;
+}
+
+static int vivid_thread_touch_cap(void *data)
+{
+	struct vivid_dev *dev = data;
+	u64 numerators_since_start;
+	u64 buffers_since_start;
+	u64 next_jiffies_since_start;
+	unsigned long jiffies_since_start;
+	unsigned long cur_jiffies;
+	unsigned int wait_jiffies;
+	unsigned int numerator;
+	unsigned int denominator;
+	int dropped_bufs;
+
+	dprintk(dev, 1, "Touch Capture Thread Start\n");
+
+	set_freezable();
+
+	/* Resets frame counters */
+	dev->touch_cap_seq_offset = 0;
+	dev->touch_cap_seq_count = 0;
+	dev->touch_cap_seq_resync = false;
+	dev->jiffies_touch_cap = jiffies;
+
+	for (;;) {
+		try_to_freeze();
+		if (kthread_should_stop())
+			break;
+
+		if (!mutex_trylock(&dev->mutex)) {
+			schedule_timeout_uninterruptible(1);
+			continue;
+		}
+		cur_jiffies = jiffies;
+		if (dev->touch_cap_seq_resync) {
+			dev->jiffies_touch_cap = cur_jiffies;
+			dev->touch_cap_seq_offset = dev->touch_cap_seq_count + 1;
+			dev->touch_cap_seq_count = 0;
+			dev->cap_seq_resync = false;
+		}
+		denominator = dev->timeperframe_tch_cap.denominator;
+		numerator = dev->timeperframe_tch_cap.numerator;
+
+		/* Calculate the number of jiffies since we started streaming */
+		jiffies_since_start = cur_jiffies - dev->jiffies_touch_cap;
+		/* Get the number of buffers streamed since the start */
+		buffers_since_start = (u64)jiffies_since_start * denominator +
+				      (HZ * numerator) / 2;
+		do_div(buffers_since_start, HZ * numerator);
+
+		/*
+		 * After more than 0xf0000000 (rounded down to a multiple of
+		 * 'jiffies-per-day' to ease jiffies_to_msecs calculation)
+		 * jiffies have passed since we started streaming reset the
+		 * counters and keep track of the sequence offset.
+		 */
+		if (jiffies_since_start > JIFFIES_RESYNC) {
+			dev->jiffies_touch_cap = cur_jiffies;
+			dev->cap_seq_offset = buffers_since_start;
+			buffers_since_start = 0;
+		}
+		dropped_bufs = buffers_since_start + dev->touch_cap_seq_offset - dev->touch_cap_seq_count;
+		dev->touch_cap_seq_count = buffers_since_start + dev->touch_cap_seq_offset;
+
+		vivid_thread_tch_cap_tick(dev, dropped_bufs);
+
+		/*
+		 * Calculate the number of 'numerators' streamed
+		 * since we started, including the current buffer.
+		 */
+		numerators_since_start = ++buffers_since_start * numerator;
+
+		/* And the number of jiffies since we started */
+		jiffies_since_start = jiffies - dev->jiffies_touch_cap;
+
+		mutex_unlock(&dev->mutex);
+
+		/*
+		 * Calculate when that next buffer is supposed to start
+		 * in jiffies since we started streaming.
+		 */
+		next_jiffies_since_start = numerators_since_start * HZ +
+					   denominator / 2;
+		do_div(next_jiffies_since_start, denominator);
+		/* If it is in the past, then just schedule asap */
+		if (next_jiffies_since_start < jiffies_since_start)
+			next_jiffies_since_start = jiffies_since_start;
+
+		wait_jiffies = next_jiffies_since_start - jiffies_since_start;
+		schedule_timeout_interruptible(wait_jiffies ? wait_jiffies : 1);
+	}
+	dprintk(dev, 1, "Touch Capture Thread End\n");
+	return 0;
+}
+
+int vivid_start_generating_touch_cap(struct vivid_dev *dev)
+{
+	if (dev->kthread_touch_cap) {
+		dev->touch_cap_streaming = true;
+		return 0;
+	}
+
+	dev->kthread_touch_cap = kthread_run(vivid_thread_touch_cap, dev,
+					     "%s-tch-cap", dev->v4l2_dev.name);
+
+	if (IS_ERR(dev->kthread_touch_cap)) {
+		int err = PTR_ERR(dev->kthread_touch_cap);
+
+		dev->kthread_touch_cap = NULL;
+		v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n");
+		return err;
+	}
+	dev->touch_cap_streaming = true;
+	dprintk(dev, 1, "returning from %s\n", __func__);
+	return 0;
+}
+
+void vivid_stop_generating_touch_cap(struct vivid_dev *dev)
+{
+	if (!dev->kthread_touch_cap)
+		return;
+
+	dev->touch_cap_streaming = false;
+
+	while (!list_empty(&dev->touch_cap_active)) {
+		struct vivid_buffer *buf;
+
+		buf = list_entry(dev->touch_cap_active.next,
+				 struct vivid_buffer, list);
+		list_del(&buf->list);
+		v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_touch_cap);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+		dprintk(dev, 2, "touch_cap buffer %d done\n",
+			buf->vb.vb2_buf.index);
+	}
+
+	kthread_stop(dev->kthread_touch_cap);
+	dev->kthread_touch_cap = NULL;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-kthread-touch.h b/drivers/media/test-drivers/vivid/vivid-kthread-touch.h
new file mode 100644
index 000000000000..ecf79b46209e
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-kthread-touch.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-kthread-cap.h - video/vbi capture thread support functions.
+ *
+ */
+
+#ifndef _VIVID_KTHREAD_CAP_H_
+#define _VIVID_KTHREAD_CAP_H_
+
+int vivid_start_generating_touch_cap(struct vivid_dev *dev);
+void vivid_stop_generating_touch_cap(struct vivid_dev *dev);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-meta-cap.c b/drivers/media/test-drivers/vivid/vivid-meta-cap.c
new file mode 100644
index 000000000000..780f96860a6d
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-meta-cap.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-meta-cap.c - meta capture support functions.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/usb/video.h>
+
+#include "vivid-core.h"
+#include "vivid-kthread-cap.h"
+#include "vivid-meta-cap.h"
+
+static int meta_cap_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+				unsigned int *nplanes, unsigned int sizes[],
+				struct device *alloc_devs[])
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	unsigned int size =  sizeof(struct vivid_uvc_meta_buf);
+
+	if (!vivid_is_webcam(dev))
+		return -EINVAL;
+
+	if (*nplanes) {
+		if (sizes[0] < size)
+			return -EINVAL;
+	} else {
+		sizes[0] = size;
+	}
+
+	if (vq->num_buffers + *nbuffers < 2)
+		*nbuffers = 2 - vq->num_buffers;
+
+	*nplanes = 1;
+	return 0;
+}
+
+static int meta_cap_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned int size = sizeof(struct vivid_uvc_meta_buf);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->buf_prepare_error) {
+		/*
+		 * Error injection: test what happens if buf_prepare() returns
+		 * an error.
+		 */
+		dev->buf_prepare_error = false;
+		return -EINVAL;
+	}
+	if (vb2_plane_size(vb, 0) < size) {
+		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
+			__func__, vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+	vb2_set_plane_payload(vb, 0, size);
+
+	return 0;
+}
+
+static void meta_cap_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	spin_lock(&dev->slock);
+	list_add_tail(&buf->list, &dev->meta_cap_active);
+	spin_unlock(&dev->slock);
+}
+
+static int meta_cap_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	int err;
+
+	dprintk(dev, 1, "%s\n", __func__);
+	dev->meta_cap_seq_count = 0;
+	if (dev->start_streaming_error) {
+		dev->start_streaming_error = false;
+		err = -EINVAL;
+	} else {
+		err = vivid_start_generating_vid_cap(dev,
+						     &dev->meta_cap_streaming);
+	}
+	if (err) {
+		struct vivid_buffer *buf, *tmp;
+
+		list_for_each_entry_safe(buf, tmp,
+					 &dev->meta_cap_active, list) {
+			list_del(&buf->list);
+			vb2_buffer_done(&buf->vb.vb2_buf,
+					VB2_BUF_STATE_QUEUED);
+		}
+	}
+	return err;
+}
+
+/* abort streaming and wait for last buffer */
+static void meta_cap_stop_streaming(struct vb2_queue *vq)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+
+	dprintk(dev, 1, "%s\n", __func__);
+	vivid_stop_generating_vid_cap(dev, &dev->meta_cap_streaming);
+}
+
+static void meta_cap_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_meta_cap);
+}
+
+const struct vb2_ops vivid_meta_cap_qops = {
+	.queue_setup		= meta_cap_queue_setup,
+	.buf_prepare		= meta_cap_buf_prepare,
+	.buf_queue		= meta_cap_buf_queue,
+	.start_streaming	= meta_cap_start_streaming,
+	.stop_streaming		= meta_cap_stop_streaming,
+	.buf_request_complete	= meta_cap_buf_request_complete,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+int vidioc_enum_fmt_meta_cap(struct file *file, void  *priv,
+			     struct v4l2_fmtdesc *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_webcam(dev))
+		return -EINVAL;
+
+	if (f->index > 0)
+		return -EINVAL;
+
+	f->type = V4L2_BUF_TYPE_META_CAPTURE;
+	f->pixelformat = V4L2_META_FMT_UVC;
+	return 0;
+}
+
+int vidioc_g_fmt_meta_cap(struct file *file, void *priv,
+			  struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_meta_format *meta = &f->fmt.meta;
+
+	if (!vivid_is_webcam(dev) || !dev->has_meta_cap)
+		return -EINVAL;
+
+	meta->dataformat = V4L2_META_FMT_UVC;
+	meta->buffersize = sizeof(struct vivid_uvc_meta_buf);
+	return 0;
+}
+
+void vivid_meta_cap_fillbuff(struct vivid_dev *dev,
+			     struct vivid_buffer *buf, u64 soe)
+{
+	struct vivid_uvc_meta_buf *meta = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+	int buf_off = 0;
+
+	buf->vb.sequence = dev->meta_cap_seq_count;
+	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
+		buf->vb.sequence /= 2;
+	memset(meta, 1, vb2_plane_size(&buf->vb.vb2_buf, 0));
+
+	meta->ns = ktime_get_ns();
+	meta->sof = buf->vb.sequence * 30;
+	meta->length = sizeof(*meta) - offsetof(struct vivid_uvc_meta_buf, length);
+	meta->flags = UVC_STREAM_EOH | UVC_STREAM_EOF;
+
+	if ((buf->vb.sequence % 2) == 0)
+		meta->flags |= UVC_STREAM_FID;
+
+	dprintk(dev, 2, "%s ns:%llu sof:%4d len:%u flags: 0x%02x",
+		__func__, meta->ns, meta->sof, meta->length, meta->flags);
+	if (dev->meta_pts) {
+		meta->flags |= UVC_STREAM_PTS;
+		meta->buf[0] = div_u64(soe, VIVID_META_CLOCK_UNIT);
+		buf_off = 4;
+		dprintk(dev, 2, " pts: %u\n", *(__u32 *)(meta->buf));
+	}
+
+	if (dev->meta_scr) {
+		meta->flags |= UVC_STREAM_SCR;
+		meta->buf[buf_off] = div_u64((soe + dev->cap_frame_eof_offset),
+					     VIVID_META_CLOCK_UNIT);
+
+		meta->buf[buf_off + 4] = (buf->vb.sequence * 30) % 1000;
+		dprintk(dev, 2, " stc: %u, sof counter: %u\n",
+			*(__u32 *)(meta->buf + buf_off),
+			*(__u16 *)(meta->buf + buf_off + 4));
+	}
+	dprintk(dev, 2, "\n");
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-meta-cap.h b/drivers/media/test-drivers/vivid/vivid-meta-cap.h
new file mode 100644
index 000000000000..4670d00d1576
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-meta-cap.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-meta-cap.h - meta capture support functions.
+ */
+#ifndef _VIVID_META_CAP_H_
+#define _VIVID_META_CAP_H_
+
+#define VIVID_META_CLOCK_UNIT	10 /* 100 MHz */
+
+struct vivid_uvc_meta_buf {
+	__u64 ns;
+	__u16 sof;
+	__u8 length;
+	__u8 flags;
+	__u8 buf[10]; /* PTS(4)+STC(4)+SOF(2) */
+} __packed;
+
+void vivid_meta_cap_fillbuff(struct vivid_dev *dev,
+			     struct vivid_buffer *buf, u64 soe);
+
+int vidioc_enum_fmt_meta_cap(struct file *file, void  *priv,
+			     struct v4l2_fmtdesc *f);
+
+int vidioc_g_fmt_meta_cap(struct file *file, void *priv,
+			  struct v4l2_format *f);
+
+extern const struct vb2_ops vivid_meta_cap_qops;
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-meta-out.c b/drivers/media/test-drivers/vivid/vivid-meta-out.c
new file mode 100644
index 000000000000..ff8a039aba72
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-meta-out.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-meta-out.c - meta output support functions.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/usb/video.h>
+
+#include "vivid-core.h"
+#include "vivid-kthread-out.h"
+#include "vivid-meta-out.h"
+
+static int meta_out_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+				unsigned int *nplanes, unsigned int sizes[],
+				struct device *alloc_devs[])
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	unsigned int size =  sizeof(struct vivid_meta_out_buf);
+
+	if (!vivid_is_webcam(dev))
+		return -EINVAL;
+
+	if (*nplanes) {
+		if (sizes[0] < size)
+			return -EINVAL;
+	} else {
+		sizes[0] = size;
+	}
+
+	if (vq->num_buffers + *nbuffers < 2)
+		*nbuffers = 2 - vq->num_buffers;
+
+	*nplanes = 1;
+	return 0;
+}
+
+static int meta_out_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned int size = sizeof(struct vivid_meta_out_buf);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->buf_prepare_error) {
+		/*
+		 * Error injection: test what happens if buf_prepare() returns
+		 * an error.
+		 */
+		dev->buf_prepare_error = false;
+		return -EINVAL;
+	}
+	if (vb2_plane_size(vb, 0) < size) {
+		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
+			__func__, vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+	vb2_set_plane_payload(vb, 0, size);
+
+	return 0;
+}
+
+static void meta_out_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	spin_lock(&dev->slock);
+	list_add_tail(&buf->list, &dev->meta_out_active);
+	spin_unlock(&dev->slock);
+}
+
+static int meta_out_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	int err;
+
+	dprintk(dev, 1, "%s\n", __func__);
+	dev->meta_out_seq_count = 0;
+	if (dev->start_streaming_error) {
+		dev->start_streaming_error = false;
+		err = -EINVAL;
+	} else {
+		err = vivid_start_generating_vid_out(dev,
+						     &dev->meta_out_streaming);
+	}
+	if (err) {
+		struct vivid_buffer *buf, *tmp;
+
+		list_for_each_entry_safe(buf, tmp,
+					 &dev->meta_out_active, list) {
+			list_del(&buf->list);
+			vb2_buffer_done(&buf->vb.vb2_buf,
+					VB2_BUF_STATE_QUEUED);
+		}
+	}
+	return err;
+}
+
+/* abort streaming and wait for last buffer */
+static void meta_out_stop_streaming(struct vb2_queue *vq)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+
+	dprintk(dev, 1, "%s\n", __func__);
+	vivid_stop_generating_vid_out(dev, &dev->meta_out_streaming);
+}
+
+static void meta_out_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_meta_out);
+}
+
+const struct vb2_ops vivid_meta_out_qops = {
+	.queue_setup            = meta_out_queue_setup,
+	.buf_prepare            = meta_out_buf_prepare,
+	.buf_queue              = meta_out_buf_queue,
+	.start_streaming        = meta_out_start_streaming,
+	.stop_streaming         = meta_out_stop_streaming,
+	.buf_request_complete   = meta_out_buf_request_complete,
+	.wait_prepare           = vb2_ops_wait_prepare,
+	.wait_finish            = vb2_ops_wait_finish,
+};
+
+int vidioc_enum_fmt_meta_out(struct file *file, void  *priv,
+			     struct v4l2_fmtdesc *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_webcam(dev))
+		return -EINVAL;
+
+	if (f->index > 0)
+		return -EINVAL;
+
+	f->type = V4L2_BUF_TYPE_META_OUTPUT;
+	f->pixelformat = V4L2_META_FMT_VIVID;
+	return 0;
+}
+
+int vidioc_g_fmt_meta_out(struct file *file, void *priv,
+			  struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_meta_format *meta = &f->fmt.meta;
+
+	if (!vivid_is_webcam(dev) || !dev->has_meta_out)
+		return -EINVAL;
+
+	meta->dataformat = V4L2_META_FMT_VIVID;
+	meta->buffersize = sizeof(struct vivid_meta_out_buf);
+	return 0;
+}
+
+void vivid_meta_out_process(struct vivid_dev *dev,
+			    struct vivid_buffer *buf)
+{
+	struct vivid_meta_out_buf *meta = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+
+	tpg_s_brightness(&dev->tpg, meta->brightness);
+	tpg_s_contrast(&dev->tpg, meta->contrast);
+	tpg_s_saturation(&dev->tpg, meta->saturation);
+	tpg_s_hue(&dev->tpg, meta->hue);
+	dprintk(dev, 2, " %s brightness %u contrast %u saturation %u hue %d\n",
+		__func__, meta->brightness, meta->contrast,
+		meta->saturation, meta->hue);
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-meta-out.h b/drivers/media/test-drivers/vivid/vivid-meta-out.h
new file mode 100644
index 000000000000..0c639b7c2842
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-meta-out.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-meta-out.h - meta output support functions.
+ */
+#ifndef _VIVID_META_OUT_H_
+#define _VIVID_META_OUT_H_
+
+struct vivid_meta_out_buf {
+	u16	brightness;
+	u16	contrast;
+	u16	saturation;
+	s16	hue;
+};
+
+void vivid_meta_out_process(struct vivid_dev *dev, struct vivid_buffer *buf);
+int vidioc_enum_fmt_meta_out(struct file *file, void  *priv,
+			     struct v4l2_fmtdesc *f);
+int vidioc_g_fmt_meta_out(struct file *file, void *priv,
+			  struct v4l2_format *f);
+int vidioc_s_fmt_meta_out(struct file *file, void *priv,
+			  struct v4l2_format *f);
+
+extern const struct vb2_ops vivid_meta_out_qops;
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-osd.c b/drivers/media/test-drivers/vivid/vivid-osd.c
new file mode 100644
index 000000000000..fbaec8acc161
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-osd.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-osd.c - osd support for testing overlays.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/font.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/fb.h>
+#include <media/videobuf2-vmalloc.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-common.h>
+
+#include "vivid-core.h"
+#include "vivid-osd.h"
+
+#define MAX_OSD_WIDTH  720
+#define MAX_OSD_HEIGHT 576
+
+/*
+ * Order: white, yellow, cyan, green, magenta, red, blue, black,
+ * and same again with the alpha bit set (if any)
+ */
+static const u16 rgb555[16] = {
+	0x7fff, 0x7fe0, 0x03ff, 0x03e0, 0x7c1f, 0x7c00, 0x001f, 0x0000,
+	0xffff, 0xffe0, 0x83ff, 0x83e0, 0xfc1f, 0xfc00, 0x801f, 0x8000
+};
+
+static const u16 rgb565[16] = {
+	0xffff, 0xffe0, 0x07ff, 0x07e0, 0xf81f, 0xf800, 0x001f, 0x0000,
+	0xffff, 0xffe0, 0x07ff, 0x07e0, 0xf81f, 0xf800, 0x001f, 0x0000
+};
+
+void vivid_clear_fb(struct vivid_dev *dev)
+{
+	void *p = dev->video_vbase;
+	const u16 *rgb = rgb555;
+	unsigned x, y;
+
+	if (dev->fb_defined.green.length == 6)
+		rgb = rgb565;
+
+	for (y = 0; y < dev->display_height; y++) {
+		u16 *d = p;
+
+		for (x = 0; x < dev->display_width; x++)
+			d[x] = rgb[(y / 16 + x / 16) % 16];
+		p += dev->display_byte_stride;
+	}
+}
+
+/* --------------------------------------------------------------------- */
+
+static int vivid_fb_ioctl(struct fb_info *info, unsigned cmd, unsigned long arg)
+{
+	struct vivid_dev *dev = (struct vivid_dev *)info->par;
+
+	switch (cmd) {
+	case FBIOGET_VBLANK: {
+		struct fb_vblank vblank;
+
+		memset(&vblank, 0, sizeof(vblank));
+		vblank.flags = FB_VBLANK_HAVE_COUNT | FB_VBLANK_HAVE_VCOUNT |
+			FB_VBLANK_HAVE_VSYNC;
+		vblank.count = 0;
+		vblank.vcount = 0;
+		vblank.hcount = 0;
+		if (copy_to_user((void __user *)arg, &vblank, sizeof(vblank)))
+			return -EFAULT;
+		return 0;
+	}
+
+	default:
+		dprintk(dev, 1, "Unknown ioctl %08x\n", cmd);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* Framebuffer device handling */
+
+static int vivid_fb_set_var(struct vivid_dev *dev, struct fb_var_screeninfo *var)
+{
+	dprintk(dev, 1, "vivid_fb_set_var\n");
+
+	if (var->bits_per_pixel != 16) {
+		dprintk(dev, 1, "vivid_fb_set_var - Invalid bpp\n");
+		return -EINVAL;
+	}
+	dev->display_byte_stride = var->xres * dev->bytes_per_pixel;
+
+	return 0;
+}
+
+static int vivid_fb_get_fix(struct vivid_dev *dev, struct fb_fix_screeninfo *fix)
+{
+	dprintk(dev, 1, "vivid_fb_get_fix\n");
+	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+	strscpy(fix->id, "vioverlay fb", sizeof(fix->id));
+	fix->smem_start = dev->video_pbase;
+	fix->smem_len = dev->video_buffer_size;
+	fix->type = FB_TYPE_PACKED_PIXELS;
+	fix->visual = FB_VISUAL_TRUECOLOR;
+	fix->xpanstep = 1;
+	fix->ypanstep = 1;
+	fix->ywrapstep = 0;
+	fix->line_length = dev->display_byte_stride;
+	fix->accel = FB_ACCEL_NONE;
+	return 0;
+}
+
+/* Check the requested display mode, returning -EINVAL if we can't
+   handle it. */
+
+static int _vivid_fb_check_var(struct fb_var_screeninfo *var, struct vivid_dev *dev)
+{
+	dprintk(dev, 1, "vivid_fb_check_var\n");
+
+	var->bits_per_pixel = 16;
+	if (var->green.length == 5) {
+		var->red.offset = 10;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 5;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		var->transp.offset = 15;
+		var->transp.length = 1;
+	} else {
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+	}
+	var->xoffset = var->yoffset = 0;
+	var->left_margin = var->upper_margin = 0;
+	var->nonstd = 0;
+
+	var->vmode &= ~FB_VMODE_MASK;
+	var->vmode |= FB_VMODE_NONINTERLACED;
+
+	/* Dummy values */
+	var->hsync_len = 24;
+	var->vsync_len = 2;
+	var->pixclock = 84316;
+	var->right_margin = 776;
+	var->lower_margin = 591;
+	return 0;
+}
+
+static int vivid_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct vivid_dev *dev = (struct vivid_dev *) info->par;
+
+	dprintk(dev, 1, "vivid_fb_check_var\n");
+	return _vivid_fb_check_var(var, dev);
+}
+
+static int vivid_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	return 0;
+}
+
+static int vivid_fb_set_par(struct fb_info *info)
+{
+	int rc = 0;
+	struct vivid_dev *dev = (struct vivid_dev *) info->par;
+
+	dprintk(dev, 1, "vivid_fb_set_par\n");
+
+	rc = vivid_fb_set_var(dev, &info->var);
+	vivid_fb_get_fix(dev, &info->fix);
+	return rc;
+}
+
+static int vivid_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+				unsigned blue, unsigned transp,
+				struct fb_info *info)
+{
+	u32 color, *palette;
+
+	if (regno >= info->cmap.len)
+		return -EINVAL;
+
+	color = ((transp & 0xFF00) << 16) | ((red & 0xFF00) << 8) |
+		 (green & 0xFF00) | ((blue & 0xFF00) >> 8);
+	if (regno >= 16)
+		return -EINVAL;
+
+	palette = info->pseudo_palette;
+	if (info->var.bits_per_pixel == 16) {
+		switch (info->var.green.length) {
+		case 6:
+			color = (red & 0xf800) |
+				((green & 0xfc00) >> 5) |
+				((blue & 0xf800) >> 11);
+			break;
+		case 5:
+			color = ((red & 0xf800) >> 1) |
+				((green & 0xf800) >> 6) |
+				((blue & 0xf800) >> 11) |
+				(transp ? 0x8000 : 0);
+			break;
+		}
+	}
+	palette[regno] = color;
+	return 0;
+}
+
+/* We don't really support blanking. All this does is enable or
+   disable the OSD. */
+static int vivid_fb_blank(int blank_mode, struct fb_info *info)
+{
+	struct vivid_dev *dev = (struct vivid_dev *)info->par;
+
+	dprintk(dev, 1, "Set blanking mode : %d\n", blank_mode);
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+		break;
+	case FB_BLANK_NORMAL:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_POWERDOWN:
+		break;
+	}
+	return 0;
+}
+
+static const struct fb_ops vivid_fb_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var   = vivid_fb_check_var,
+	.fb_set_par     = vivid_fb_set_par,
+	.fb_setcolreg   = vivid_fb_setcolreg,
+	.fb_fillrect    = cfb_fillrect,
+	.fb_copyarea    = cfb_copyarea,
+	.fb_imageblit   = cfb_imageblit,
+	.fb_cursor      = NULL,
+	.fb_ioctl       = vivid_fb_ioctl,
+	.fb_pan_display = vivid_fb_pan_display,
+	.fb_blank       = vivid_fb_blank,
+};
+
+/* Initialization */
+
+
+/* Setup our initial video mode */
+static int vivid_fb_init_vidmode(struct vivid_dev *dev)
+{
+	struct v4l2_rect start_window;
+
+	/* Color mode */
+
+	dev->bits_per_pixel = 16;
+	dev->bytes_per_pixel = dev->bits_per_pixel / 8;
+
+	start_window.width = MAX_OSD_WIDTH;
+	start_window.left = 0;
+
+	dev->display_byte_stride = start_window.width * dev->bytes_per_pixel;
+
+	/* Vertical size & position */
+
+	start_window.height = MAX_OSD_HEIGHT;
+	start_window.top = 0;
+
+	dev->display_width = start_window.width;
+	dev->display_height = start_window.height;
+
+	/* Generate a valid fb_var_screeninfo */
+
+	dev->fb_defined.xres = dev->display_width;
+	dev->fb_defined.yres = dev->display_height;
+	dev->fb_defined.xres_virtual = dev->display_width;
+	dev->fb_defined.yres_virtual = dev->display_height;
+	dev->fb_defined.bits_per_pixel = dev->bits_per_pixel;
+	dev->fb_defined.vmode = FB_VMODE_NONINTERLACED;
+	dev->fb_defined.left_margin = start_window.left + 1;
+	dev->fb_defined.upper_margin = start_window.top + 1;
+	dev->fb_defined.accel_flags = FB_ACCEL_NONE;
+	dev->fb_defined.nonstd = 0;
+	/* set default to 1:5:5:5 */
+	dev->fb_defined.green.length = 5;
+
+	/* We've filled in the most data, let the usual mode check
+	   routine fill in the rest. */
+	_vivid_fb_check_var(&dev->fb_defined, dev);
+
+	/* Generate valid fb_fix_screeninfo */
+
+	vivid_fb_get_fix(dev, &dev->fb_fix);
+
+	/* Generate valid fb_info */
+
+	dev->fb_info.node = -1;
+	dev->fb_info.flags = FBINFO_FLAG_DEFAULT;
+	dev->fb_info.par = dev;
+	dev->fb_info.var = dev->fb_defined;
+	dev->fb_info.fix = dev->fb_fix;
+	dev->fb_info.screen_base = (u8 __iomem *)dev->video_vbase;
+	dev->fb_info.fbops = &vivid_fb_ops;
+
+	/* Supply some monitor specs. Bogus values will do for now */
+	dev->fb_info.monspecs.hfmin = 8000;
+	dev->fb_info.monspecs.hfmax = 70000;
+	dev->fb_info.monspecs.vfmin = 10;
+	dev->fb_info.monspecs.vfmax = 100;
+
+	/* Allocate color map */
+	if (fb_alloc_cmap(&dev->fb_info.cmap, 256, 1)) {
+		pr_err("abort, unable to alloc cmap\n");
+		return -ENOMEM;
+	}
+
+	/* Allocate the pseudo palette */
+	dev->fb_info.pseudo_palette = kmalloc_array(16, sizeof(u32), GFP_KERNEL);
+
+	return dev->fb_info.pseudo_palette ? 0 : -ENOMEM;
+}
+
+/* Release any memory we've grabbed */
+void vivid_fb_release_buffers(struct vivid_dev *dev)
+{
+	if (dev->video_vbase == NULL)
+		return;
+
+	/* Release cmap */
+	if (dev->fb_info.cmap.len)
+		fb_dealloc_cmap(&dev->fb_info.cmap);
+
+	/* Release pseudo palette */
+	kfree(dev->fb_info.pseudo_palette);
+	kfree(dev->video_vbase);
+}
+
+/* Initialize the specified card */
+
+int vivid_fb_init(struct vivid_dev *dev)
+{
+	int ret;
+
+	dev->video_buffer_size = MAX_OSD_HEIGHT * MAX_OSD_WIDTH * 2;
+	dev->video_vbase = kzalloc(dev->video_buffer_size, GFP_KERNEL | GFP_DMA32);
+	if (dev->video_vbase == NULL)
+		return -ENOMEM;
+	dev->video_pbase = virt_to_phys(dev->video_vbase);
+
+	pr_info("Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n",
+			dev->video_pbase, dev->video_vbase,
+			dev->video_buffer_size / 1024);
+
+	/* Set the startup video mode information */
+	ret = vivid_fb_init_vidmode(dev);
+	if (ret) {
+		vivid_fb_release_buffers(dev);
+		return ret;
+	}
+
+	vivid_clear_fb(dev);
+
+	/* Register the framebuffer */
+	if (register_framebuffer(&dev->fb_info) < 0) {
+		vivid_fb_release_buffers(dev);
+		return -EINVAL;
+	}
+
+	/* Set the card to the requested mode */
+	vivid_fb_set_par(&dev->fb_info);
+	return 0;
+
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-osd.h b/drivers/media/test-drivers/vivid/vivid-osd.h
new file mode 100644
index 000000000000..f9ac1af25dd3
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-osd.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-osd.h - output overlay support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_OSD_H_
+#define _VIVID_OSD_H_
+
+int vivid_fb_init(struct vivid_dev *dev);
+void vivid_fb_release_buffers(struct vivid_dev *dev);
+void vivid_clear_fb(struct vivid_dev *dev);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-radio-common.c b/drivers/media/test-drivers/vivid/vivid-radio-common.c
new file mode 100644
index 000000000000..138c7bce68b1
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-radio-common.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-radio-common.c - common radio rx/tx support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+
+#include "vivid-core.h"
+#include "vivid-ctrls.h"
+#include "vivid-radio-common.h"
+#include "vivid-rds-gen.h"
+
+/*
+ * These functions are shared between the vivid receiver and transmitter
+ * since both use the same frequency bands.
+ */
+
+const struct v4l2_frequency_band vivid_radio_bands[TOT_BANDS] = {
+	/* Band FM */
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 0,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			      V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = FM_FREQ_RANGE_LOW,
+		.rangehigh  = FM_FREQ_RANGE_HIGH,
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+	/* Band AM */
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 1,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = AM_FREQ_RANGE_LOW,
+		.rangehigh  = AM_FREQ_RANGE_HIGH,
+		.modulation = V4L2_BAND_MODULATION_AM,
+	},
+	/* Band SW */
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 2,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = SW_FREQ_RANGE_LOW,
+		.rangehigh  = SW_FREQ_RANGE_HIGH,
+		.modulation = V4L2_BAND_MODULATION_AM,
+	},
+};
+
+/*
+ * Initialize the RDS generator. If we can loop, then the RDS generator
+ * is set up with the values from the RDS TX controls, otherwise it
+ * will fill in standard values using one of two alternates.
+ */
+void vivid_radio_rds_init(struct vivid_dev *dev)
+{
+	struct vivid_rds_gen *rds = &dev->rds_gen;
+	bool alt = dev->radio_rx_rds_use_alternates;
+
+	/* Do nothing, blocks will be filled by the transmitter */
+	if (dev->radio_rds_loop && !dev->radio_tx_rds_controls)
+		return;
+
+	if (dev->radio_rds_loop) {
+		v4l2_ctrl_lock(dev->radio_tx_rds_pi);
+		rds->picode = dev->radio_tx_rds_pi->cur.val;
+		rds->pty = dev->radio_tx_rds_pty->cur.val;
+		rds->mono_stereo = dev->radio_tx_rds_mono_stereo->cur.val;
+		rds->art_head = dev->radio_tx_rds_art_head->cur.val;
+		rds->compressed = dev->radio_tx_rds_compressed->cur.val;
+		rds->dyn_pty = dev->radio_tx_rds_dyn_pty->cur.val;
+		rds->ta = dev->radio_tx_rds_ta->cur.val;
+		rds->tp = dev->radio_tx_rds_tp->cur.val;
+		rds->ms = dev->radio_tx_rds_ms->cur.val;
+		strscpy(rds->psname,
+			dev->radio_tx_rds_psname->p_cur.p_char,
+			sizeof(rds->psname));
+		strscpy(rds->radiotext,
+			dev->radio_tx_rds_radiotext->p_cur.p_char + alt * 64,
+			sizeof(rds->radiotext));
+		v4l2_ctrl_unlock(dev->radio_tx_rds_pi);
+	} else {
+		vivid_rds_gen_fill(rds, dev->radio_rx_freq, alt);
+	}
+	if (dev->radio_rx_rds_controls) {
+		v4l2_ctrl_s_ctrl(dev->radio_rx_rds_pty, rds->pty);
+		v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ta, rds->ta);
+		v4l2_ctrl_s_ctrl(dev->radio_rx_rds_tp, rds->tp);
+		v4l2_ctrl_s_ctrl(dev->radio_rx_rds_ms, rds->ms);
+		v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_psname, rds->psname);
+		v4l2_ctrl_s_ctrl_string(dev->radio_rx_rds_radiotext, rds->radiotext);
+		if (!dev->radio_rds_loop)
+			dev->radio_rx_rds_use_alternates = !dev->radio_rx_rds_use_alternates;
+	}
+	vivid_rds_generate(rds);
+}
+
+/*
+ * Calculate the emulated signal quality taking into account the frequency
+ * the transmitter is using.
+ */
+static void vivid_radio_calc_sig_qual(struct vivid_dev *dev)
+{
+	int mod = 16000;
+	int delta = 800;
+	int sig_qual, sig_qual_tx = mod;
+
+	/*
+	 * For SW and FM there is a channel every 1000 kHz, for AM there is one
+	 * every 100 kHz.
+	 */
+	if (dev->radio_rx_freq <= AM_FREQ_RANGE_HIGH) {
+		mod /= 10;
+		delta /= 10;
+	}
+	sig_qual = (dev->radio_rx_freq + delta) % mod - delta;
+	if (dev->has_radio_tx)
+		sig_qual_tx = dev->radio_rx_freq - dev->radio_tx_freq;
+	if (abs(sig_qual_tx) <= abs(sig_qual)) {
+		sig_qual = sig_qual_tx;
+		/*
+		 * Zero the internal rds buffer if we are going to loop
+		 * rds blocks.
+		 */
+		if (!dev->radio_rds_loop && !dev->radio_tx_rds_controls)
+			memset(dev->rds_gen.data, 0,
+			       sizeof(dev->rds_gen.data));
+		dev->radio_rds_loop = dev->radio_rx_freq >= FM_FREQ_RANGE_LOW;
+	} else {
+		dev->radio_rds_loop = false;
+	}
+	if (dev->radio_rx_freq <= AM_FREQ_RANGE_HIGH)
+		sig_qual *= 10;
+	dev->radio_rx_sig_qual = sig_qual;
+}
+
+int vivid_radio_g_frequency(struct file *file, const unsigned *pfreq, struct v4l2_frequency *vf)
+{
+	if (vf->tuner != 0)
+		return -EINVAL;
+	vf->frequency = *pfreq;
+	return 0;
+}
+
+int vivid_radio_s_frequency(struct file *file, unsigned *pfreq, const struct v4l2_frequency *vf)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	unsigned freq;
+	unsigned band;
+
+	if (vf->tuner != 0)
+		return -EINVAL;
+
+	if (vf->frequency >= (FM_FREQ_RANGE_LOW + SW_FREQ_RANGE_HIGH) / 2)
+		band = BAND_FM;
+	else if (vf->frequency <= (AM_FREQ_RANGE_HIGH + SW_FREQ_RANGE_LOW) / 2)
+		band = BAND_AM;
+	else
+		band = BAND_SW;
+
+	freq = clamp_t(u32, vf->frequency, vivid_radio_bands[band].rangelow,
+					   vivid_radio_bands[band].rangehigh);
+	*pfreq = freq;
+
+	/*
+	 * For both receiver and transmitter recalculate the signal quality
+	 * (since that depends on both frequencies) and re-init the rds
+	 * generator.
+	 */
+	vivid_radio_calc_sig_qual(dev);
+	vivid_radio_rds_init(dev);
+	return 0;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-radio-common.h b/drivers/media/test-drivers/vivid/vivid-radio-common.h
new file mode 100644
index 000000000000..30a9900e5b2b
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-radio-common.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-radio-common.h - common radio rx/tx support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_RADIO_COMMON_H_
+#define _VIVID_RADIO_COMMON_H_
+
+/* The supported radio frequency ranges in kHz */
+#define FM_FREQ_RANGE_LOW       (64000U * 16U)
+#define FM_FREQ_RANGE_HIGH      (108000U * 16U)
+#define AM_FREQ_RANGE_LOW       (520U * 16U)
+#define AM_FREQ_RANGE_HIGH      (1710U * 16U)
+#define SW_FREQ_RANGE_LOW       (2300U * 16U)
+#define SW_FREQ_RANGE_HIGH      (26100U * 16U)
+
+enum { BAND_FM, BAND_AM, BAND_SW, TOT_BANDS };
+
+extern const struct v4l2_frequency_band vivid_radio_bands[TOT_BANDS];
+
+int vivid_radio_g_frequency(struct file *file, const unsigned *freq, struct v4l2_frequency *vf);
+int vivid_radio_s_frequency(struct file *file, unsigned *freq, const struct v4l2_frequency *vf);
+
+void vivid_radio_rds_init(struct vivid_dev *dev);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-radio-rx.c b/drivers/media/test-drivers/vivid/vivid-radio-rx.c
new file mode 100644
index 000000000000..232cab508f48
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-radio-rx.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-radio-rx.c - radio receiver support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-dv-timings.h>
+#include <linux/sched/signal.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-dv-timings.h>
+
+#include "vivid-core.h"
+#include "vivid-ctrls.h"
+#include "vivid-radio-common.h"
+#include "vivid-rds-gen.h"
+#include "vivid-radio-rx.h"
+
+ssize_t vivid_radio_rx_read(struct file *file, char __user *buf,
+			 size_t size, loff_t *offset)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_rds_data *data = dev->rds_gen.data;
+	bool use_alternates;
+	ktime_t timestamp;
+	unsigned blk;
+	int perc;
+	int i;
+
+	if (dev->radio_rx_rds_controls)
+		return -EINVAL;
+	if (size < sizeof(*data))
+		return 0;
+	size = sizeof(*data) * (size / sizeof(*data));
+
+	if (mutex_lock_interruptible(&dev->mutex))
+		return -ERESTARTSYS;
+	if (dev->radio_rx_rds_owner &&
+	    file->private_data != dev->radio_rx_rds_owner) {
+		mutex_unlock(&dev->mutex);
+		return -EBUSY;
+	}
+	if (dev->radio_rx_rds_owner == NULL) {
+		vivid_radio_rds_init(dev);
+		dev->radio_rx_rds_owner = file->private_data;
+	}
+
+retry:
+	timestamp = ktime_sub(ktime_get(), dev->radio_rds_init_time);
+	blk = ktime_divns(timestamp, VIVID_RDS_NSEC_PER_BLK);
+	use_alternates = (blk % VIVID_RDS_GEN_BLOCKS) & 1;
+
+	if (dev->radio_rx_rds_last_block == 0 ||
+	    dev->radio_rx_rds_use_alternates != use_alternates) {
+		dev->radio_rx_rds_use_alternates = use_alternates;
+		/* Re-init the RDS generator */
+		vivid_radio_rds_init(dev);
+	}
+	if (blk >= dev->radio_rx_rds_last_block + VIVID_RDS_GEN_BLOCKS)
+		dev->radio_rx_rds_last_block = blk - VIVID_RDS_GEN_BLOCKS + 1;
+
+	/*
+	 * No data is available if there hasn't been time to get new data,
+	 * or if the RDS receiver has been disabled, or if we use the data
+	 * from the RDS transmitter and that RDS transmitter has been disabled,
+	 * or if the signal quality is too weak.
+	 */
+	if (blk == dev->radio_rx_rds_last_block || !dev->radio_rx_rds_enabled ||
+	    (dev->radio_rds_loop && !(dev->radio_tx_subchans & V4L2_TUNER_SUB_RDS)) ||
+	    abs(dev->radio_rx_sig_qual) > 200) {
+		mutex_unlock(&dev->mutex);
+		if (file->f_flags & O_NONBLOCK)
+			return -EWOULDBLOCK;
+		if (msleep_interruptible(20) && signal_pending(current))
+			return -EINTR;
+		if (mutex_lock_interruptible(&dev->mutex))
+			return -ERESTARTSYS;
+		goto retry;
+	}
+
+	/* abs(dev->radio_rx_sig_qual) <= 200, map that to a 0-50% range */
+	perc = abs(dev->radio_rx_sig_qual) / 4;
+
+	for (i = 0; i < size && blk > dev->radio_rx_rds_last_block;
+			dev->radio_rx_rds_last_block++) {
+		unsigned data_blk = dev->radio_rx_rds_last_block % VIVID_RDS_GEN_BLOCKS;
+		struct v4l2_rds_data rds = data[data_blk];
+
+		if (data_blk == 0 && dev->radio_rds_loop)
+			vivid_radio_rds_init(dev);
+		if (perc && prandom_u32_max(100) < perc) {
+			switch (prandom_u32_max(4)) {
+			case 0:
+				rds.block |= V4L2_RDS_BLOCK_CORRECTED;
+				break;
+			case 1:
+				rds.block |= V4L2_RDS_BLOCK_INVALID;
+				break;
+			case 2:
+				rds.block |= V4L2_RDS_BLOCK_ERROR;
+				rds.lsb = prandom_u32_max(256);
+				rds.msb = prandom_u32_max(256);
+				break;
+			case 3: /* Skip block altogether */
+				if (i)
+					continue;
+				/*
+				 * Must make sure at least one block is
+				 * returned, otherwise the application
+				 * might think that end-of-file occurred.
+				 */
+				break;
+			}
+		}
+		if (copy_to_user(buf + i, &rds, sizeof(rds))) {
+			i = -EFAULT;
+			break;
+		}
+		i += sizeof(rds);
+	}
+	mutex_unlock(&dev->mutex);
+	return i;
+}
+
+__poll_t vivid_radio_rx_poll(struct file *file, struct poll_table_struct *wait)
+{
+	return EPOLLIN | EPOLLRDNORM | v4l2_ctrl_poll(file, wait);
+}
+
+int vivid_radio_rx_enum_freq_bands(struct file *file, void *fh, struct v4l2_frequency_band *band)
+{
+	if (band->tuner != 0)
+		return -EINVAL;
+
+	if (band->index >= TOT_BANDS)
+		return -EINVAL;
+
+	*band = vivid_radio_bands[band->index];
+	return 0;
+}
+
+int vivid_radio_rx_s_hw_freq_seek(struct file *file, void *fh, const struct v4l2_hw_freq_seek *a)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	unsigned low, high;
+	unsigned freq;
+	unsigned spacing;
+	unsigned band;
+
+	if (a->tuner)
+		return -EINVAL;
+	if (a->wrap_around && dev->radio_rx_hw_seek_mode == VIVID_HW_SEEK_BOUNDED)
+		return -EINVAL;
+
+	if (!a->wrap_around && dev->radio_rx_hw_seek_mode == VIVID_HW_SEEK_WRAP)
+		return -EINVAL;
+	if (!a->rangelow ^ !a->rangehigh)
+		return -EINVAL;
+
+	if (file->f_flags & O_NONBLOCK)
+		return -EWOULDBLOCK;
+
+	if (a->rangelow) {
+		for (band = 0; band < TOT_BANDS; band++)
+			if (a->rangelow >= vivid_radio_bands[band].rangelow &&
+			    a->rangehigh <= vivid_radio_bands[band].rangehigh)
+				break;
+		if (band == TOT_BANDS)
+			return -EINVAL;
+		if (!dev->radio_rx_hw_seek_prog_lim &&
+		    (a->rangelow != vivid_radio_bands[band].rangelow ||
+		     a->rangehigh != vivid_radio_bands[band].rangehigh))
+			return -EINVAL;
+		low = a->rangelow;
+		high = a->rangehigh;
+	} else {
+		for (band = 0; band < TOT_BANDS; band++)
+			if (dev->radio_rx_freq >= vivid_radio_bands[band].rangelow &&
+			    dev->radio_rx_freq <= vivid_radio_bands[band].rangehigh)
+				break;
+		if (band == TOT_BANDS)
+			return -EINVAL;
+		low = vivid_radio_bands[band].rangelow;
+		high = vivid_radio_bands[band].rangehigh;
+	}
+	spacing = band == BAND_AM ? 1600 : 16000;
+	freq = clamp(dev->radio_rx_freq, low, high);
+
+	if (a->seek_upward) {
+		freq = spacing * (freq / spacing) + spacing;
+		if (freq > high) {
+			if (!a->wrap_around)
+				return -ENODATA;
+			freq = spacing * (low / spacing) + spacing;
+			if (freq >= dev->radio_rx_freq)
+				return -ENODATA;
+		}
+	} else {
+		freq = spacing * ((freq + spacing - 1) / spacing) - spacing;
+		if (freq < low) {
+			if (!a->wrap_around)
+				return -ENODATA;
+			freq = spacing * ((high + spacing - 1) / spacing) - spacing;
+			if (freq <= dev->radio_rx_freq)
+				return -ENODATA;
+		}
+	}
+	return 0;
+}
+
+int vivid_radio_rx_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	int delta = 800;
+	int sig_qual;
+
+	if (vt->index > 0)
+		return -EINVAL;
+
+	strscpy(vt->name, "AM/FM/SW Receiver", sizeof(vt->name));
+	vt->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			 V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_RDS |
+			 (dev->radio_rx_rds_controls ?
+				V4L2_TUNER_CAP_RDS_CONTROLS :
+				V4L2_TUNER_CAP_RDS_BLOCK_IO) |
+			 (dev->radio_rx_hw_seek_prog_lim ?
+				V4L2_TUNER_CAP_HWSEEK_PROG_LIM : 0);
+	switch (dev->radio_rx_hw_seek_mode) {
+	case VIVID_HW_SEEK_BOUNDED:
+		vt->capability |= V4L2_TUNER_CAP_HWSEEK_BOUNDED;
+		break;
+	case VIVID_HW_SEEK_WRAP:
+		vt->capability |= V4L2_TUNER_CAP_HWSEEK_WRAP;
+		break;
+	case VIVID_HW_SEEK_BOTH:
+		vt->capability |= V4L2_TUNER_CAP_HWSEEK_WRAP |
+				  V4L2_TUNER_CAP_HWSEEK_BOUNDED;
+		break;
+	}
+	vt->rangelow = AM_FREQ_RANGE_LOW;
+	vt->rangehigh = FM_FREQ_RANGE_HIGH;
+	sig_qual = dev->radio_rx_sig_qual;
+	vt->signal = abs(sig_qual) > delta ? 0 :
+		     0xffff - ((unsigned)abs(sig_qual) * 0xffff) / delta;
+	vt->afc = sig_qual > delta ? 0 : sig_qual;
+	if (abs(sig_qual) > delta)
+		vt->rxsubchans = 0;
+	else if (dev->radio_rx_freq < FM_FREQ_RANGE_LOW || vt->signal < 0x8000)
+		vt->rxsubchans = V4L2_TUNER_SUB_MONO;
+	else if (dev->radio_rds_loop && !(dev->radio_tx_subchans & V4L2_TUNER_SUB_STEREO))
+		vt->rxsubchans = V4L2_TUNER_SUB_MONO;
+	else
+		vt->rxsubchans = V4L2_TUNER_SUB_STEREO;
+	if (dev->radio_rx_rds_enabled &&
+	    (!dev->radio_rds_loop || (dev->radio_tx_subchans & V4L2_TUNER_SUB_RDS)) &&
+	    dev->radio_rx_freq >= FM_FREQ_RANGE_LOW && vt->signal >= 0xc000)
+		vt->rxsubchans |= V4L2_TUNER_SUB_RDS;
+	if (dev->radio_rx_rds_controls)
+		vivid_radio_rds_init(dev);
+	vt->audmode = dev->radio_rx_audmode;
+	return 0;
+}
+
+int vivid_radio_rx_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (vt->index)
+		return -EINVAL;
+	dev->radio_rx_audmode = vt->audmode >= V4L2_TUNER_MODE_STEREO;
+	return 0;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-radio-rx.h b/drivers/media/test-drivers/vivid/vivid-radio-rx.h
new file mode 100644
index 000000000000..c9c7849f6f99
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-radio-rx.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-radio-rx.h - radio receiver support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_RADIO_RX_H_
+#define _VIVID_RADIO_RX_H_
+
+ssize_t vivid_radio_rx_read(struct file *, char __user *, size_t, loff_t *);
+__poll_t vivid_radio_rx_poll(struct file *file, struct poll_table_struct *wait);
+
+int vivid_radio_rx_enum_freq_bands(struct file *file, void *fh, struct v4l2_frequency_band *band);
+int vivid_radio_rx_s_hw_freq_seek(struct file *file, void *fh, const struct v4l2_hw_freq_seek *a);
+int vivid_radio_rx_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt);
+int vivid_radio_rx_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-radio-tx.c b/drivers/media/test-drivers/vivid/vivid-radio-tx.c
new file mode 100644
index 000000000000..049d40b948bb
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-radio-tx.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-radio-tx.c - radio transmitter support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-dv-timings.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-dv-timings.h>
+
+#include "vivid-core.h"
+#include "vivid-ctrls.h"
+#include "vivid-radio-common.h"
+#include "vivid-radio-tx.h"
+
+ssize_t vivid_radio_tx_write(struct file *file, const char __user *buf,
+			  size_t size, loff_t *offset)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_rds_data *data = dev->rds_gen.data;
+	ktime_t timestamp;
+	unsigned blk;
+	int i;
+
+	if (dev->radio_tx_rds_controls)
+		return -EINVAL;
+
+	if (size < sizeof(*data))
+		return -EINVAL;
+	size = sizeof(*data) * (size / sizeof(*data));
+
+	if (mutex_lock_interruptible(&dev->mutex))
+		return -ERESTARTSYS;
+	if (dev->radio_tx_rds_owner &&
+	    file->private_data != dev->radio_tx_rds_owner) {
+		mutex_unlock(&dev->mutex);
+		return -EBUSY;
+	}
+	dev->radio_tx_rds_owner = file->private_data;
+
+retry:
+	timestamp = ktime_sub(ktime_get(), dev->radio_rds_init_time);
+	blk = ktime_divns(timestamp, VIVID_RDS_NSEC_PER_BLK);
+	if (blk - VIVID_RDS_GEN_BLOCKS >= dev->radio_tx_rds_last_block)
+		dev->radio_tx_rds_last_block = blk - VIVID_RDS_GEN_BLOCKS + 1;
+
+	/*
+	 * No data is available if there hasn't been time to get new data,
+	 * or if the RDS receiver has been disabled, or if we use the data
+	 * from the RDS transmitter and that RDS transmitter has been disabled,
+	 * or if the signal quality is too weak.
+	 */
+	if (blk == dev->radio_tx_rds_last_block ||
+	    !(dev->radio_tx_subchans & V4L2_TUNER_SUB_RDS)) {
+		mutex_unlock(&dev->mutex);
+		if (file->f_flags & O_NONBLOCK)
+			return -EWOULDBLOCK;
+		if (msleep_interruptible(20) && signal_pending(current))
+			return -EINTR;
+		if (mutex_lock_interruptible(&dev->mutex))
+			return -ERESTARTSYS;
+		goto retry;
+	}
+
+	for (i = 0; i < size && blk > dev->radio_tx_rds_last_block;
+			dev->radio_tx_rds_last_block++) {
+		unsigned data_blk = dev->radio_tx_rds_last_block % VIVID_RDS_GEN_BLOCKS;
+		struct v4l2_rds_data rds;
+
+		if (copy_from_user(&rds, buf + i, sizeof(rds))) {
+			i = -EFAULT;
+			break;
+		}
+		i += sizeof(rds);
+		if (!dev->radio_rds_loop)
+			continue;
+		if ((rds.block & V4L2_RDS_BLOCK_MSK) == V4L2_RDS_BLOCK_INVALID ||
+		    (rds.block & V4L2_RDS_BLOCK_ERROR))
+			continue;
+		rds.block &= V4L2_RDS_BLOCK_MSK;
+		data[data_blk] = rds;
+	}
+	mutex_unlock(&dev->mutex);
+	return i;
+}
+
+__poll_t vivid_radio_tx_poll(struct file *file, struct poll_table_struct *wait)
+{
+	return EPOLLOUT | EPOLLWRNORM | v4l2_ctrl_poll(file, wait);
+}
+
+int vidioc_g_modulator(struct file *file, void *fh, struct v4l2_modulator *a)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (a->index > 0)
+		return -EINVAL;
+
+	strscpy(a->name, "AM/FM/SW Transmitter", sizeof(a->name));
+	a->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_RDS |
+			(dev->radio_tx_rds_controls ?
+				V4L2_TUNER_CAP_RDS_CONTROLS :
+				V4L2_TUNER_CAP_RDS_BLOCK_IO);
+	a->rangelow = AM_FREQ_RANGE_LOW;
+	a->rangehigh = FM_FREQ_RANGE_HIGH;
+	a->txsubchans = dev->radio_tx_subchans;
+	return 0;
+}
+
+int vidioc_s_modulator(struct file *file, void *fh, const struct v4l2_modulator *a)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (a->index)
+		return -EINVAL;
+	if (a->txsubchans & ~0x13)
+		return -EINVAL;
+	dev->radio_tx_subchans = a->txsubchans;
+	return 0;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-radio-tx.h b/drivers/media/test-drivers/vivid/vivid-radio-tx.h
new file mode 100644
index 000000000000..c2bf1e7e634a
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-radio-tx.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-radio-tx.h - radio transmitter support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_RADIO_TX_H_
+#define _VIVID_RADIO_TX_H_
+
+ssize_t vivid_radio_tx_write(struct file *, const char __user *, size_t, loff_t *);
+__poll_t vivid_radio_tx_poll(struct file *file, struct poll_table_struct *wait);
+
+int vidioc_g_modulator(struct file *file, void *fh, struct v4l2_modulator *a);
+int vidioc_s_modulator(struct file *file, void *fh, const struct v4l2_modulator *a);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-rds-gen.c b/drivers/media/test-drivers/vivid/vivid-rds-gen.c
new file mode 100644
index 000000000000..b5b104ee64c9
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-rds-gen.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-rds-gen.c - rds (radio data system) generator support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/string.h>
+#include <linux/videodev2.h>
+
+#include "vivid-rds-gen.h"
+
+static u8 vivid_get_di(const struct vivid_rds_gen *rds, unsigned grp)
+{
+	switch (grp) {
+	case 0:
+		return (rds->dyn_pty << 2) | (grp & 3);
+	case 1:
+		return (rds->compressed << 2) | (grp & 3);
+	case 2:
+		return (rds->art_head << 2) | (grp & 3);
+	case 3:
+		return (rds->mono_stereo << 2) | (grp & 3);
+	}
+	return 0;
+}
+
+/*
+ * This RDS generator creates 57 RDS groups (one group == four RDS blocks).
+ * Groups 0-3, 22-25 and 44-47 (spaced 22 groups apart) are filled with a
+ * standard 0B group containing the PI code and PS name.
+ *
+ * Groups 4-19 and 26-41 use group 2A for the radio text.
+ *
+ * Group 56 contains the time (group 4A).
+ *
+ * All remaining groups use a filler group 15B block that just repeats
+ * the PI and PTY codes.
+ */
+void vivid_rds_generate(struct vivid_rds_gen *rds)
+{
+	struct v4l2_rds_data *data = rds->data;
+	unsigned grp;
+	unsigned idx;
+	struct tm tm;
+	unsigned date;
+	unsigned time;
+	int l;
+
+	for (grp = 0; grp < VIVID_RDS_GEN_GROUPS; grp++, data += VIVID_RDS_GEN_BLKS_PER_GRP) {
+		data[0].lsb = rds->picode & 0xff;
+		data[0].msb = rds->picode >> 8;
+		data[0].block = V4L2_RDS_BLOCK_A | (V4L2_RDS_BLOCK_A << 3);
+		data[1].lsb = rds->pty << 5;
+		data[1].msb = (rds->pty >> 3) | (rds->tp << 2);
+		data[1].block = V4L2_RDS_BLOCK_B | (V4L2_RDS_BLOCK_B << 3);
+		data[3].block = V4L2_RDS_BLOCK_D | (V4L2_RDS_BLOCK_D << 3);
+
+		switch (grp) {
+		case 0 ... 3:
+		case 22 ... 25:
+		case 44 ... 47: /* Group 0B */
+			idx = (grp % 22) % 4;
+			data[1].lsb |= (rds->ta << 4) | (rds->ms << 3);
+			data[1].lsb |= vivid_get_di(rds, idx);
+			data[1].msb |= 1 << 3;
+			data[2].lsb = rds->picode & 0xff;
+			data[2].msb = rds->picode >> 8;
+			data[2].block = V4L2_RDS_BLOCK_C_ALT | (V4L2_RDS_BLOCK_C_ALT << 3);
+			data[3].lsb = rds->psname[2 * idx + 1];
+			data[3].msb = rds->psname[2 * idx];
+			break;
+		case 4 ... 19:
+		case 26 ... 41: /* Group 2A */
+			idx = ((grp - 4) % 22) % 16;
+			data[1].lsb |= idx;
+			data[1].msb |= 4 << 3;
+			data[2].msb = rds->radiotext[4 * idx];
+			data[2].lsb = rds->radiotext[4 * idx + 1];
+			data[2].block = V4L2_RDS_BLOCK_C | (V4L2_RDS_BLOCK_C << 3);
+			data[3].msb = rds->radiotext[4 * idx + 2];
+			data[3].lsb = rds->radiotext[4 * idx + 3];
+			break;
+		case 56:
+			/*
+			 * Group 4A
+			 *
+			 * Uses the algorithm from Annex G of the RDS standard
+			 * EN 50067:1998 to convert a UTC date to an RDS Modified
+			 * Julian Day.
+			 */
+			time64_to_tm(ktime_get_real_seconds(), 0, &tm);
+			l = tm.tm_mon <= 1;
+			date = 14956 + tm.tm_mday + ((tm.tm_year - l) * 1461) / 4 +
+				((tm.tm_mon + 2 + l * 12) * 306001) / 10000;
+			time = (tm.tm_hour << 12) |
+			       (tm.tm_min << 6) |
+			       (sys_tz.tz_minuteswest >= 0 ? 0x20 : 0) |
+			       (abs(sys_tz.tz_minuteswest) / 30);
+			data[1].lsb &= ~3;
+			data[1].lsb |= date >> 15;
+			data[1].msb |= 8 << 3;
+			data[2].lsb = (date << 1) & 0xfe;
+			data[2].lsb |= (time >> 16) & 1;
+			data[2].msb = (date >> 7) & 0xff;
+			data[2].block = V4L2_RDS_BLOCK_C | (V4L2_RDS_BLOCK_C << 3);
+			data[3].lsb = time & 0xff;
+			data[3].msb = (time >> 8) & 0xff;
+			break;
+		default: /* Group 15B */
+			data[1].lsb |= (rds->ta << 4) | (rds->ms << 3);
+			data[1].lsb |= vivid_get_di(rds, grp % 22);
+			data[1].msb |= 0x1f << 3;
+			data[2].lsb = rds->picode & 0xff;
+			data[2].msb = rds->picode >> 8;
+			data[2].block = V4L2_RDS_BLOCK_C_ALT | (V4L2_RDS_BLOCK_C_ALT << 3);
+			data[3].lsb = rds->pty << 5;
+			data[3].lsb |= (rds->ta << 4) | (rds->ms << 3);
+			data[3].lsb |= vivid_get_di(rds, grp % 22);
+			data[3].msb |= rds->pty >> 3;
+			data[3].msb |= 0x1f << 3;
+			break;
+		}
+	}
+}
+
+void vivid_rds_gen_fill(struct vivid_rds_gen *rds, unsigned freq,
+			  bool alt)
+{
+	/* Alternate PTY between Info and Weather */
+	if (rds->use_rbds) {
+		rds->picode = 0x2e75; /* 'KLNX' call sign */
+		rds->pty = alt ? 29 : 2;
+	} else {
+		rds->picode = 0x8088;
+		rds->pty = alt ? 16 : 3;
+	}
+	rds->mono_stereo = true;
+	rds->art_head = false;
+	rds->compressed = false;
+	rds->dyn_pty = false;
+	rds->tp = true;
+	rds->ta = alt;
+	rds->ms = true;
+	snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
+		 freq / 16, ((freq & 0xf) * 10) / 16);
+	if (alt)
+		strscpy(rds->radiotext,
+			" The Radio Data System can switch between different Radio Texts ",
+			sizeof(rds->radiotext));
+	else
+		strscpy(rds->radiotext,
+			"An example of Radio Text as transmitted by the Radio Data System",
+			sizeof(rds->radiotext));
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-rds-gen.h b/drivers/media/test-drivers/vivid/vivid-rds-gen.h
new file mode 100644
index 000000000000..35ac5742302b
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-rds-gen.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-rds-gen.h - rds (radio data system) generator support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_RDS_GEN_H_
+#define _VIVID_RDS_GEN_H_
+
+/*
+ * It takes almost exactly 5 seconds to transmit 57 RDS groups.
+ * Each group has 4 blocks and each block has a payload of 16 bits + a
+ * block identification. The driver will generate the contents of these
+ * 57 groups only when necessary and it will just be played continuously.
+ */
+#define VIVID_RDS_GEN_GROUPS 57
+#define VIVID_RDS_GEN_BLKS_PER_GRP 4
+#define VIVID_RDS_GEN_BLOCKS (VIVID_RDS_GEN_BLKS_PER_GRP * VIVID_RDS_GEN_GROUPS)
+#define VIVID_RDS_NSEC_PER_BLK (u32)(5ull * NSEC_PER_SEC / VIVID_RDS_GEN_BLOCKS)
+
+struct vivid_rds_gen {
+	struct v4l2_rds_data	data[VIVID_RDS_GEN_BLOCKS];
+	bool			use_rbds;
+	u16			picode;
+	u8			pty;
+	bool			mono_stereo;
+	bool			art_head;
+	bool			compressed;
+	bool			dyn_pty;
+	bool			ta;
+	bool			tp;
+	bool			ms;
+	char			psname[8 + 1];
+	char			radiotext[64 + 1];
+};
+
+void vivid_rds_gen_fill(struct vivid_rds_gen *rds, unsigned freq,
+		    bool use_alternate);
+void vivid_rds_generate(struct vivid_rds_gen *rds);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-sdr-cap.c b/drivers/media/test-drivers/vivid/vivid-sdr-cap.c
new file mode 100644
index 000000000000..2b7522e16efc
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-sdr-cap.c
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-sdr-cap.c - software defined radio support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/math64.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-dv-timings.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-dv-timings.h>
+#include <linux/fixp-arith.h>
+
+#include "vivid-core.h"
+#include "vivid-ctrls.h"
+#include "vivid-sdr-cap.h"
+
+/* stream formats */
+struct vivid_format {
+	u32	pixelformat;
+	u32	buffersize;
+};
+
+/* format descriptions for capture and preview */
+static const struct vivid_format formats[] = {
+	{
+		.pixelformat	= V4L2_SDR_FMT_CU8,
+		.buffersize	= SDR_CAP_SAMPLES_PER_BUF * 2,
+	}, {
+		.pixelformat	= V4L2_SDR_FMT_CS8,
+		.buffersize	= SDR_CAP_SAMPLES_PER_BUF * 2,
+	},
+};
+
+static const struct v4l2_frequency_band bands_adc[] = {
+	{
+		.tuner = 0,
+		.type = V4L2_TUNER_ADC,
+		.index = 0,
+		.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   =  300000,
+		.rangehigh  =  300000,
+	},
+	{
+		.tuner = 0,
+		.type = V4L2_TUNER_ADC,
+		.index = 1,
+		.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   =  900001,
+		.rangehigh  = 2800000,
+	},
+	{
+		.tuner = 0,
+		.type = V4L2_TUNER_ADC,
+		.index = 2,
+		.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = 3200000,
+		.rangehigh  = 3200000,
+	},
+};
+
+/* ADC band midpoints */
+#define BAND_ADC_0 ((bands_adc[0].rangehigh + bands_adc[1].rangelow) / 2)
+#define BAND_ADC_1 ((bands_adc[1].rangehigh + bands_adc[2].rangelow) / 2)
+
+static const struct v4l2_frequency_band bands_fm[] = {
+	{
+		.tuner = 1,
+		.type = V4L2_TUNER_RF,
+		.index = 0,
+		.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   =    50000000,
+		.rangehigh  =  2000000000,
+	},
+};
+
+static void vivid_thread_sdr_cap_tick(struct vivid_dev *dev)
+{
+	struct vivid_buffer *sdr_cap_buf = NULL;
+
+	dprintk(dev, 1, "SDR Capture Thread Tick\n");
+
+	/* Drop a certain percentage of buffers. */
+	if (dev->perc_dropped_buffers &&
+	    prandom_u32_max(100) < dev->perc_dropped_buffers)
+		return;
+
+	spin_lock(&dev->slock);
+	if (!list_empty(&dev->sdr_cap_active)) {
+		sdr_cap_buf = list_entry(dev->sdr_cap_active.next,
+					 struct vivid_buffer, list);
+		list_del(&sdr_cap_buf->list);
+	}
+	spin_unlock(&dev->slock);
+
+	if (sdr_cap_buf) {
+		sdr_cap_buf->vb.sequence = dev->sdr_cap_seq_count;
+		v4l2_ctrl_request_setup(sdr_cap_buf->vb.vb2_buf.req_obj.req,
+					&dev->ctrl_hdl_sdr_cap);
+		v4l2_ctrl_request_complete(sdr_cap_buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_sdr_cap);
+		vivid_sdr_cap_process(dev, sdr_cap_buf);
+		sdr_cap_buf->vb.vb2_buf.timestamp =
+			ktime_get_ns() + dev->time_wrap_offset;
+		vb2_buffer_done(&sdr_cap_buf->vb.vb2_buf, dev->dqbuf_error ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+		dev->dqbuf_error = false;
+	}
+}
+
+static int vivid_thread_sdr_cap(void *data)
+{
+	struct vivid_dev *dev = data;
+	u64 samples_since_start;
+	u64 buffers_since_start;
+	u64 next_jiffies_since_start;
+	unsigned long jiffies_since_start;
+	unsigned long cur_jiffies;
+	unsigned wait_jiffies;
+
+	dprintk(dev, 1, "SDR Capture Thread Start\n");
+
+	set_freezable();
+
+	/* Resets frame counters */
+	dev->sdr_cap_seq_offset = 0;
+	if (dev->seq_wrap)
+		dev->sdr_cap_seq_offset = 0xffffff80U;
+	dev->jiffies_sdr_cap = jiffies;
+	dev->sdr_cap_seq_resync = false;
+
+	for (;;) {
+		try_to_freeze();
+		if (kthread_should_stop())
+			break;
+
+		if (!mutex_trylock(&dev->mutex)) {
+			schedule_timeout_uninterruptible(1);
+			continue;
+		}
+
+		cur_jiffies = jiffies;
+		if (dev->sdr_cap_seq_resync) {
+			dev->jiffies_sdr_cap = cur_jiffies;
+			dev->sdr_cap_seq_offset = dev->sdr_cap_seq_count + 1;
+			dev->sdr_cap_seq_count = 0;
+			dev->sdr_cap_seq_resync = false;
+		}
+		/* Calculate the number of jiffies since we started streaming */
+		jiffies_since_start = cur_jiffies - dev->jiffies_sdr_cap;
+		/* Get the number of buffers streamed since the start */
+		buffers_since_start =
+			(u64)jiffies_since_start * dev->sdr_adc_freq +
+				      (HZ * SDR_CAP_SAMPLES_PER_BUF) / 2;
+		do_div(buffers_since_start, HZ * SDR_CAP_SAMPLES_PER_BUF);
+
+		/*
+		 * After more than 0xf0000000 (rounded down to a multiple of
+		 * 'jiffies-per-day' to ease jiffies_to_msecs calculation)
+		 * jiffies have passed since we started streaming reset the
+		 * counters and keep track of the sequence offset.
+		 */
+		if (jiffies_since_start > JIFFIES_RESYNC) {
+			dev->jiffies_sdr_cap = cur_jiffies;
+			dev->sdr_cap_seq_offset = buffers_since_start;
+			buffers_since_start = 0;
+		}
+		dev->sdr_cap_seq_count =
+			buffers_since_start + dev->sdr_cap_seq_offset;
+
+		vivid_thread_sdr_cap_tick(dev);
+		mutex_unlock(&dev->mutex);
+
+		/*
+		 * Calculate the number of samples streamed since we started,
+		 * not including the current buffer.
+		 */
+		samples_since_start = buffers_since_start * SDR_CAP_SAMPLES_PER_BUF;
+
+		/* And the number of jiffies since we started */
+		jiffies_since_start = jiffies - dev->jiffies_sdr_cap;
+
+		/* Increase by the number of samples in one buffer */
+		samples_since_start += SDR_CAP_SAMPLES_PER_BUF;
+		/*
+		 * Calculate when that next buffer is supposed to start
+		 * in jiffies since we started streaming.
+		 */
+		next_jiffies_since_start = samples_since_start * HZ +
+					   dev->sdr_adc_freq / 2;
+		do_div(next_jiffies_since_start, dev->sdr_adc_freq);
+		/* If it is in the past, then just schedule asap */
+		if (next_jiffies_since_start < jiffies_since_start)
+			next_jiffies_since_start = jiffies_since_start;
+
+		wait_jiffies = next_jiffies_since_start - jiffies_since_start;
+		schedule_timeout_interruptible(wait_jiffies ? wait_jiffies : 1);
+	}
+	dprintk(dev, 1, "SDR Capture Thread End\n");
+	return 0;
+}
+
+static int sdr_cap_queue_setup(struct vb2_queue *vq,
+		       unsigned *nbuffers, unsigned *nplanes,
+		       unsigned sizes[], struct device *alloc_devs[])
+{
+	/* 2 = max 16-bit sample returned */
+	sizes[0] = SDR_CAP_SAMPLES_PER_BUF * 2;
+	*nplanes = 1;
+	return 0;
+}
+
+static int sdr_cap_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned size = SDR_CAP_SAMPLES_PER_BUF * 2;
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->buf_prepare_error) {
+		/*
+		 * Error injection: test what happens if buf_prepare() returns
+		 * an error.
+		 */
+		dev->buf_prepare_error = false;
+		return -EINVAL;
+	}
+	if (vb2_plane_size(vb, 0) < size) {
+		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
+				__func__, vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+	vb2_set_plane_payload(vb, 0, size);
+
+	return 0;
+}
+
+static void sdr_cap_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	spin_lock(&dev->slock);
+	list_add_tail(&buf->list, &dev->sdr_cap_active);
+	spin_unlock(&dev->slock);
+}
+
+static int sdr_cap_start_streaming(struct vb2_queue *vq, unsigned count)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	int err = 0;
+
+	dprintk(dev, 1, "%s\n", __func__);
+	dev->sdr_cap_seq_count = 0;
+	if (dev->start_streaming_error) {
+		dev->start_streaming_error = false;
+		err = -EINVAL;
+	} else if (dev->kthread_sdr_cap == NULL) {
+		dev->kthread_sdr_cap = kthread_run(vivid_thread_sdr_cap, dev,
+				"%s-sdr-cap", dev->v4l2_dev.name);
+
+		if (IS_ERR(dev->kthread_sdr_cap)) {
+			v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n");
+			err = PTR_ERR(dev->kthread_sdr_cap);
+			dev->kthread_sdr_cap = NULL;
+		}
+	}
+	if (err) {
+		struct vivid_buffer *buf, *tmp;
+
+		list_for_each_entry_safe(buf, tmp, &dev->sdr_cap_active, list) {
+			list_del(&buf->list);
+			vb2_buffer_done(&buf->vb.vb2_buf,
+					VB2_BUF_STATE_QUEUED);
+		}
+	}
+	return err;
+}
+
+/* abort streaming and wait for last buffer */
+static void sdr_cap_stop_streaming(struct vb2_queue *vq)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+
+	if (dev->kthread_sdr_cap == NULL)
+		return;
+
+	while (!list_empty(&dev->sdr_cap_active)) {
+		struct vivid_buffer *buf;
+
+		buf = list_entry(dev->sdr_cap_active.next,
+				struct vivid_buffer, list);
+		list_del(&buf->list);
+		v4l2_ctrl_request_complete(buf->vb.vb2_buf.req_obj.req,
+					   &dev->ctrl_hdl_sdr_cap);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+
+	/* shutdown control thread */
+	kthread_stop(dev->kthread_sdr_cap);
+	dev->kthread_sdr_cap = NULL;
+}
+
+static void sdr_cap_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_sdr_cap);
+}
+
+const struct vb2_ops vivid_sdr_cap_qops = {
+	.queue_setup		= sdr_cap_queue_setup,
+	.buf_prepare		= sdr_cap_buf_prepare,
+	.buf_queue		= sdr_cap_buf_queue,
+	.start_streaming	= sdr_cap_start_streaming,
+	.stop_streaming		= sdr_cap_stop_streaming,
+	.buf_request_complete	= sdr_cap_buf_request_complete,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+int vivid_sdr_enum_freq_bands(struct file *file, void *fh,
+		struct v4l2_frequency_band *band)
+{
+	switch (band->tuner) {
+	case 0:
+		if (band->index >= ARRAY_SIZE(bands_adc))
+			return -EINVAL;
+		*band = bands_adc[band->index];
+		return 0;
+	case 1:
+		if (band->index >= ARRAY_SIZE(bands_fm))
+			return -EINVAL;
+		*band = bands_fm[band->index];
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+int vivid_sdr_g_frequency(struct file *file, void *fh,
+		struct v4l2_frequency *vf)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	switch (vf->tuner) {
+	case 0:
+		vf->frequency = dev->sdr_adc_freq;
+		vf->type = V4L2_TUNER_ADC;
+		return 0;
+	case 1:
+		vf->frequency = dev->sdr_fm_freq;
+		vf->type = V4L2_TUNER_RF;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+int vivid_sdr_s_frequency(struct file *file, void *fh,
+		const struct v4l2_frequency *vf)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	unsigned freq = vf->frequency;
+	unsigned band;
+
+	switch (vf->tuner) {
+	case 0:
+		if (vf->type != V4L2_TUNER_ADC)
+			return -EINVAL;
+		if (freq < BAND_ADC_0)
+			band = 0;
+		else if (freq < BAND_ADC_1)
+			band = 1;
+		else
+			band = 2;
+
+		freq = clamp_t(unsigned, freq,
+				bands_adc[band].rangelow,
+				bands_adc[band].rangehigh);
+
+		if (vb2_is_streaming(&dev->vb_sdr_cap_q) &&
+		    freq != dev->sdr_adc_freq) {
+			/* resync the thread's timings */
+			dev->sdr_cap_seq_resync = true;
+		}
+		dev->sdr_adc_freq = freq;
+		return 0;
+	case 1:
+		if (vf->type != V4L2_TUNER_RF)
+			return -EINVAL;
+		dev->sdr_fm_freq = clamp_t(unsigned, freq,
+				bands_fm[0].rangelow,
+				bands_fm[0].rangehigh);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+int vivid_sdr_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
+{
+	switch (vt->index) {
+	case 0:
+		strscpy(vt->name, "ADC", sizeof(vt->name));
+		vt->type = V4L2_TUNER_ADC;
+		vt->capability =
+			V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
+		vt->rangelow = bands_adc[0].rangelow;
+		vt->rangehigh = bands_adc[2].rangehigh;
+		return 0;
+	case 1:
+		strscpy(vt->name, "RF", sizeof(vt->name));
+		vt->type = V4L2_TUNER_RF;
+		vt->capability =
+			V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
+		vt->rangelow = bands_fm[0].rangelow;
+		vt->rangehigh = bands_fm[0].rangehigh;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+int vivid_sdr_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt)
+{
+	if (vt->index > 1)
+		return -EINVAL;
+	return 0;
+}
+
+int vidioc_enum_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f)
+{
+	if (f->index >= ARRAY_SIZE(formats))
+		return -EINVAL;
+	f->pixelformat = formats[f->index].pixelformat;
+	return 0;
+}
+
+int vidioc_g_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	f->fmt.sdr.pixelformat = dev->sdr_pixelformat;
+	f->fmt.sdr.buffersize = dev->sdr_buffersize;
+	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
+	return 0;
+}
+
+int vidioc_s_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct vb2_queue *q = &dev->vb_sdr_cap_q;
+	int i;
+
+	if (vb2_is_busy(q))
+		return -EBUSY;
+
+	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
+	for (i = 0; i < ARRAY_SIZE(formats); i++) {
+		if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
+			dev->sdr_pixelformat = formats[i].pixelformat;
+			dev->sdr_buffersize = formats[i].buffersize;
+			f->fmt.sdr.buffersize = formats[i].buffersize;
+			return 0;
+		}
+	}
+	dev->sdr_pixelformat = formats[0].pixelformat;
+	dev->sdr_buffersize = formats[0].buffersize;
+	f->fmt.sdr.pixelformat = formats[0].pixelformat;
+	f->fmt.sdr.buffersize = formats[0].buffersize;
+	return 0;
+}
+
+int vidioc_try_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+	int i;
+
+	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
+	for (i = 0; i < ARRAY_SIZE(formats); i++) {
+		if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
+			f->fmt.sdr.buffersize = formats[i].buffersize;
+			return 0;
+		}
+	}
+	f->fmt.sdr.pixelformat = formats[0].pixelformat;
+	f->fmt.sdr.buffersize = formats[0].buffersize;
+	return 0;
+}
+
+#define FIXP_N    (15)
+#define FIXP_FRAC (1 << FIXP_N)
+#define FIXP_2PI  ((int)(2 * 3.141592653589 * FIXP_FRAC))
+#define M_100000PI (3.14159 * 100000)
+
+void vivid_sdr_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf)
+{
+	u8 *vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+	unsigned long i;
+	unsigned long plane_size = vb2_plane_size(&buf->vb.vb2_buf, 0);
+	s64 s64tmp;
+	s32 src_phase_step;
+	s32 mod_phase_step;
+	s32 fixp_i;
+	s32 fixp_q;
+
+	/* calculate phase step */
+	#define BEEP_FREQ 1000 /* 1kHz beep */
+	src_phase_step = DIV_ROUND_CLOSEST(FIXP_2PI * BEEP_FREQ,
+					   dev->sdr_adc_freq);
+
+	for (i = 0; i < plane_size; i += 2) {
+		mod_phase_step = fixp_cos32_rad(dev->sdr_fixp_src_phase,
+						FIXP_2PI) >> (31 - FIXP_N);
+
+		dev->sdr_fixp_src_phase += src_phase_step;
+		s64tmp = (s64) mod_phase_step * dev->sdr_fm_deviation;
+		dev->sdr_fixp_mod_phase += div_s64(s64tmp, M_100000PI);
+
+		/*
+		 * Transfer phase angle to [0, 2xPI] in order to avoid variable
+		 * overflow and make it suitable for cosine implementation
+		 * used, which does not support negative angles.
+		 */
+		dev->sdr_fixp_src_phase %= FIXP_2PI;
+		dev->sdr_fixp_mod_phase %= FIXP_2PI;
+
+		if (dev->sdr_fixp_mod_phase < 0)
+			dev->sdr_fixp_mod_phase += FIXP_2PI;
+
+		fixp_i = fixp_cos32_rad(dev->sdr_fixp_mod_phase, FIXP_2PI);
+		fixp_q = fixp_sin32_rad(dev->sdr_fixp_mod_phase, FIXP_2PI);
+
+		/* Normalize fraction values represented with 32 bit precision
+		 * to fixed point representation with FIXP_N bits */
+		fixp_i >>= (31 - FIXP_N);
+		fixp_q >>= (31 - FIXP_N);
+
+		switch (dev->sdr_pixelformat) {
+		case V4L2_SDR_FMT_CU8:
+			/* convert 'fixp float' to u8 [0, +255] */
+			/* u8 = X * 127.5 + 127.5; X is float [-1.0, +1.0] */
+			fixp_i = fixp_i * 1275 + FIXP_FRAC * 1275;
+			fixp_q = fixp_q * 1275 + FIXP_FRAC * 1275;
+			*vbuf++ = DIV_ROUND_CLOSEST(fixp_i, FIXP_FRAC * 10);
+			*vbuf++ = DIV_ROUND_CLOSEST(fixp_q, FIXP_FRAC * 10);
+			break;
+		case V4L2_SDR_FMT_CS8:
+			/* convert 'fixp float' to s8 [-128, +127] */
+			/* s8 = X * 127.5 - 0.5; X is float [-1.0, +1.0] */
+			fixp_i = fixp_i * 1275 - FIXP_FRAC * 5;
+			fixp_q = fixp_q * 1275 - FIXP_FRAC * 5;
+			*vbuf++ = DIV_ROUND_CLOSEST(fixp_i, FIXP_FRAC * 10);
+			*vbuf++ = DIV_ROUND_CLOSEST(fixp_q, FIXP_FRAC * 10);
+			break;
+		default:
+			break;
+		}
+	}
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-sdr-cap.h b/drivers/media/test-drivers/vivid/vivid-sdr-cap.h
new file mode 100644
index 000000000000..813c9248e5a7
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-sdr-cap.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-sdr-cap.h - software defined radio support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_SDR_CAP_H_
+#define _VIVID_SDR_CAP_H_
+
+int vivid_sdr_enum_freq_bands(struct file *file, void *fh, struct v4l2_frequency_band *band);
+int vivid_sdr_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf);
+int vivid_sdr_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf);
+int vivid_sdr_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt);
+int vivid_sdr_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt);
+int vidioc_enum_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f);
+int vidioc_g_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f);
+int vidioc_s_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f);
+int vidioc_try_fmt_sdr_cap(struct file *file, void *fh, struct v4l2_format *f);
+void vivid_sdr_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf);
+
+extern const struct vb2_ops vivid_sdr_cap_qops;
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-touch-cap.c b/drivers/media/test-drivers/vivid/vivid-touch-cap.c
new file mode 100644
index 000000000000..ebb00b128030
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-touch-cap.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-touch-cap.c - touch support functions.
+ */
+
+#include "vivid-core.h"
+#include "vivid-kthread-touch.h"
+#include "vivid-vid-common.h"
+#include "vivid-touch-cap.h"
+
+static int touch_cap_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+				 unsigned int *nplanes, unsigned int sizes[],
+				 struct device *alloc_devs[])
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	struct v4l2_pix_format *f = &dev->tch_format;
+	unsigned int size = f->sizeimage;
+
+	if (*nplanes) {
+		if (sizes[0] < size)
+			return -EINVAL;
+	} else {
+		sizes[0] = size;
+	}
+
+	if (vq->num_buffers + *nbuffers < 2)
+		*nbuffers = 2 - vq->num_buffers;
+
+	*nplanes = 1;
+	return 0;
+}
+
+static int touch_cap_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct v4l2_pix_format *f = &dev->tch_format;
+	unsigned int size = f->sizeimage;
+
+	if (dev->buf_prepare_error) {
+		/*
+		 * Error injection: test what happens if buf_prepare() returns
+		 * an error.
+		 */
+		dev->buf_prepare_error = false;
+		return -EINVAL;
+	}
+	if (vb2_plane_size(vb, 0) < size) {
+		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
+			__func__, vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+	vb2_set_plane_payload(vb, 0, size);
+
+	return 0;
+}
+
+static void touch_cap_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
+
+	vbuf->field = V4L2_FIELD_NONE;
+	spin_lock(&dev->slock);
+	list_add_tail(&buf->list, &dev->touch_cap_active);
+	spin_unlock(&dev->slock);
+}
+
+static int touch_cap_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	int err;
+
+	dev->touch_cap_seq_count = 0;
+	if (dev->start_streaming_error) {
+		dev->start_streaming_error = false;
+		err = -EINVAL;
+	} else {
+		err = vivid_start_generating_touch_cap(dev);
+	}
+	if (err) {
+		struct vivid_buffer *buf, *tmp;
+
+		list_for_each_entry_safe(buf, tmp,
+					 &dev->touch_cap_active, list) {
+			list_del(&buf->list);
+			vb2_buffer_done(&buf->vb.vb2_buf,
+					VB2_BUF_STATE_QUEUED);
+		}
+	}
+	return err;
+}
+
+/* abort streaming and wait for last buffer */
+static void touch_cap_stop_streaming(struct vb2_queue *vq)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+
+	vivid_stop_generating_touch_cap(dev);
+}
+
+static void touch_cap_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_touch_cap);
+}
+
+const struct vb2_ops vivid_touch_cap_qops = {
+	.queue_setup		= touch_cap_queue_setup,
+	.buf_prepare		= touch_cap_buf_prepare,
+	.buf_queue		= touch_cap_buf_queue,
+	.start_streaming	= touch_cap_start_streaming,
+	.stop_streaming		= touch_cap_stop_streaming,
+	.buf_request_complete	= touch_cap_buf_request_complete,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+int vivid_enum_fmt_tch(struct file *file, void  *priv, struct v4l2_fmtdesc *f)
+{
+	if (f->index)
+		return -EINVAL;
+
+	f->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
+	return 0;
+}
+
+int vivid_g_fmt_tch(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+	f->fmt.pix = dev->tch_format;
+	return 0;
+}
+
+int vivid_g_fmt_tch_mplane(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_format sp_fmt;
+
+	if (!dev->multiplanar)
+		return -ENOTTY;
+	sp_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	sp_fmt.fmt.pix = dev->tch_format;
+	fmt_sp2mp(&sp_fmt, f);
+	return 0;
+}
+
+int vivid_g_parm_tch(struct file *file, void *priv,
+		     struct v4l2_streamparm *parm)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (parm->type != (dev->multiplanar ?
+			   V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :
+			   V4L2_BUF_TYPE_VIDEO_CAPTURE))
+		return -EINVAL;
+
+	parm->parm.capture.capability   = V4L2_CAP_TIMEPERFRAME;
+	parm->parm.capture.timeperframe = dev->timeperframe_tch_cap;
+	parm->parm.capture.readbuffers  = 1;
+	return 0;
+}
+
+int vivid_enum_input_tch(struct file *file, void *priv, struct v4l2_input *inp)
+{
+	if (inp->index)
+		return -EINVAL;
+
+	inp->type = V4L2_INPUT_TYPE_TOUCH;
+	strscpy(inp->name, "Vivid Touch", sizeof(inp->name));
+	inp->capabilities = 0;
+	return 0;
+}
+
+int vivid_g_input_tch(struct file *file, void *priv, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+int vivid_set_touch(struct vivid_dev *dev, unsigned int i)
+{
+	struct v4l2_pix_format *f = &dev->tch_format;
+
+	if (i)
+		return -EINVAL;
+
+	f->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
+	f->width =  VIVID_TCH_WIDTH;
+	f->height = VIVID_TCH_HEIGHT;
+	f->field = V4L2_FIELD_NONE;
+	f->colorspace = V4L2_COLORSPACE_RAW;
+	f->bytesperline = f->width * sizeof(s16);
+	f->sizeimage = f->width * f->height * sizeof(s16);
+	return 0;
+}
+
+int vivid_s_input_tch(struct file *file, void *priv, unsigned int i)
+{
+	return vivid_set_touch(video_drvdata(file), i);
+}
+
+static void vivid_fill_buff_noise(__s16 *tch_buf, int size)
+{
+	int i;
+
+	/* Fill 10% of the values within range -3 and 3, zero the others */
+	for (i = 0; i < size; i++) {
+		unsigned int rand = get_random_int();
+
+		if (rand % 10)
+			tch_buf[i] = 0;
+		else
+			tch_buf[i] = (rand / 10) % 7 - 3;
+	}
+}
+
+static inline int get_random_pressure(void)
+{
+	return get_random_int() % VIVID_PRESSURE_LIMIT;
+}
+
+static void vivid_tch_buf_set(struct v4l2_pix_format *f,
+			      __s16 *tch_buf,
+			      int index)
+{
+	unsigned int x = index % f->width;
+	unsigned int y = index / f->width;
+	unsigned int offset = VIVID_MIN_PRESSURE;
+
+	tch_buf[index] = offset + get_random_pressure();
+	offset /= 2;
+	if (x)
+		tch_buf[index - 1] = offset + get_random_pressure();
+	if (x < f->width - 1)
+		tch_buf[index + 1] = offset + get_random_pressure();
+	if (y)
+		tch_buf[index - f->width] = offset + get_random_pressure();
+	if (y < f->height - 1)
+		tch_buf[index + f->width] = offset + get_random_pressure();
+	offset /= 2;
+	if (x && y)
+		tch_buf[index - 1 - f->width] = offset + get_random_pressure();
+	if (x < f->width - 1 && y)
+		tch_buf[index + 1 - f->width] = offset + get_random_pressure();
+	if (x && y < f->height - 1)
+		tch_buf[index - 1 + f->width] = offset + get_random_pressure();
+	if (x < f->width - 1 && y < f->height - 1)
+		tch_buf[index + 1 + f->width] = offset + get_random_pressure();
+}
+
+void vivid_fillbuff_tch(struct vivid_dev *dev, struct vivid_buffer *buf)
+{
+	struct v4l2_pix_format *f = &dev->tch_format;
+	int size = f->width * f->height;
+	int x, y, xstart, ystart, offset_x, offset_y;
+	unsigned int test_pattern, test_pat_idx, rand;
+
+	__s16 *tch_buf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+
+	buf->vb.sequence = dev->touch_cap_seq_count;
+	test_pattern = (buf->vb.sequence / TCH_SEQ_COUNT) % TEST_CASE_MAX;
+	test_pat_idx = buf->vb.sequence % TCH_SEQ_COUNT;
+
+	vivid_fill_buff_noise(tch_buf, size);
+
+	if (test_pat_idx >= TCH_PATTERN_COUNT)
+		return;
+
+	if (test_pat_idx == 0)
+		dev->tch_pat_random = get_random_int();
+	rand = dev->tch_pat_random;
+
+	switch (test_pattern) {
+	case SINGLE_TAP:
+		if (test_pat_idx == 2)
+			vivid_tch_buf_set(f, tch_buf, rand % size);
+		break;
+	case DOUBLE_TAP:
+		if (test_pat_idx == 2 || test_pat_idx == 4)
+			vivid_tch_buf_set(f, tch_buf, rand % size);
+		break;
+	case TRIPLE_TAP:
+		if (test_pat_idx == 2 || test_pat_idx == 4 || test_pat_idx == 6)
+			vivid_tch_buf_set(f, tch_buf, rand % size);
+		break;
+	case MOVE_LEFT_TO_RIGHT:
+		vivid_tch_buf_set(f, tch_buf,
+				  (rand % f->height) * f->width +
+				  test_pat_idx *
+				  (f->width / TCH_PATTERN_COUNT));
+		break;
+	case ZOOM_IN:
+		x = f->width / 2;
+		y = f->height / 2;
+		offset_x = ((TCH_PATTERN_COUNT - 1 - test_pat_idx) * x) /
+				TCH_PATTERN_COUNT;
+		offset_y = ((TCH_PATTERN_COUNT - 1 - test_pat_idx) * y) /
+				TCH_PATTERN_COUNT;
+		vivid_tch_buf_set(f, tch_buf,
+				  (x - offset_x) + f->width * (y - offset_y));
+		vivid_tch_buf_set(f, tch_buf,
+				  (x + offset_x) + f->width * (y + offset_y));
+		break;
+	case ZOOM_OUT:
+		x = f->width / 2;
+		y = f->height / 2;
+		offset_x = (test_pat_idx * x) / TCH_PATTERN_COUNT;
+		offset_y = (test_pat_idx * y) / TCH_PATTERN_COUNT;
+		vivid_tch_buf_set(f, tch_buf,
+				  (x - offset_x) + f->width * (y - offset_y));
+		vivid_tch_buf_set(f, tch_buf,
+				  (x + offset_x) + f->width * (y + offset_y));
+		break;
+	case PALM_PRESS:
+		for (x = 0; x < f->width; x++)
+			for (y = f->height / 2; y < f->height; y++)
+				tch_buf[x + f->width * y] = VIVID_MIN_PRESSURE +
+							get_random_pressure();
+		break;
+	case MULTIPLE_PRESS:
+		/* 16 pressure points */
+		for (y = 0; y < 4; y++) {
+			for (x = 0; x < 4; x++) {
+				ystart = (y * f->height) / 4 + f->height / 8;
+				xstart = (x * f->width) / 4 + f->width / 8;
+				vivid_tch_buf_set(f, tch_buf,
+						  ystart * f->width + xstart);
+			}
+		}
+		break;
+	}
+#ifdef __BIG_ENDIAN__
+	for (x = 0; x < size; x++)
+		tch_buf[x] = (__force s16)__cpu_to_le16((u16)tch_buf[x]);
+#endif
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-touch-cap.h b/drivers/media/test-drivers/vivid/vivid-touch-cap.h
new file mode 100644
index 000000000000..07e514046ae8
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-touch-cap.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-touch-cap.h - touch support functions.
+ */
+#ifndef _VIVID_TOUCH_CAP_H_
+#define _VIVID_TOUCH_CAP_H_
+
+#define VIVID_TCH_HEIGHT	12
+#define VIVID_TCH_WIDTH		21
+#define VIVID_MIN_PRESSURE	180
+#define VIVID_PRESSURE_LIMIT	40
+#define TCH_SEQ_COUNT		16
+#define TCH_PATTERN_COUNT	12
+
+enum vivid_tch_test {
+	SINGLE_TAP,
+	DOUBLE_TAP,
+	TRIPLE_TAP,
+	MOVE_LEFT_TO_RIGHT,
+	ZOOM_IN,
+	ZOOM_OUT,
+	PALM_PRESS,
+	MULTIPLE_PRESS,
+	TEST_CASE_MAX
+};
+
+extern const struct vb2_ops vivid_touch_cap_qops;
+
+int vivid_enum_fmt_tch(struct file *file, void  *priv, struct v4l2_fmtdesc *f);
+int vivid_g_fmt_tch(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_g_fmt_tch_mplane(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_enum_input_tch(struct file *file, void *priv, struct v4l2_input *inp);
+int vivid_g_input_tch(struct file *file, void *priv, unsigned int *i);
+int vivid_s_input_tch(struct file *file, void *priv, unsigned int i);
+void vivid_fillbuff_tch(struct vivid_dev *dev, struct vivid_buffer *buf);
+int vivid_set_touch(struct vivid_dev *dev, unsigned int i);
+int vivid_g_parm_tch(struct file *file, void *priv,
+		     struct v4l2_streamparm *parm);
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-vbi-cap.c b/drivers/media/test-drivers/vivid/vivid-vbi-cap.c
new file mode 100644
index 000000000000..1a9348eea781
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vbi-cap.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-vbi-cap.c - vbi capture support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+
+#include "vivid-core.h"
+#include "vivid-kthread-cap.h"
+#include "vivid-vbi-cap.h"
+#include "vivid-vbi-gen.h"
+
+static void vivid_sliced_vbi_cap_fill(struct vivid_dev *dev, unsigned seqnr)
+{
+	struct vivid_vbi_gen_data *vbi_gen = &dev->vbi_gen;
+	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
+
+	vivid_vbi_gen_sliced(vbi_gen, is_60hz, seqnr);
+
+	if (!is_60hz) {
+		if (dev->loop_video) {
+			if (dev->vbi_out_have_wss) {
+				vbi_gen->data[12].data[0] = dev->vbi_out_wss[0];
+				vbi_gen->data[12].data[1] = dev->vbi_out_wss[1];
+			} else {
+				vbi_gen->data[12].id = 0;
+			}
+		} else {
+			switch (tpg_g_video_aspect(&dev->tpg)) {
+			case TPG_VIDEO_ASPECT_14X9_CENTRE:
+				vbi_gen->data[12].data[0] = 0x01;
+				break;
+			case TPG_VIDEO_ASPECT_16X9_CENTRE:
+				vbi_gen->data[12].data[0] = 0x0b;
+				break;
+			case TPG_VIDEO_ASPECT_16X9_ANAMORPHIC:
+				vbi_gen->data[12].data[0] = 0x07;
+				break;
+			case TPG_VIDEO_ASPECT_4X3:
+			default:
+				vbi_gen->data[12].data[0] = 0x08;
+				break;
+			}
+		}
+	} else if (dev->loop_video && is_60hz) {
+		if (dev->vbi_out_have_cc[0]) {
+			vbi_gen->data[0].data[0] = dev->vbi_out_cc[0][0];
+			vbi_gen->data[0].data[1] = dev->vbi_out_cc[0][1];
+		} else {
+			vbi_gen->data[0].id = 0;
+		}
+		if (dev->vbi_out_have_cc[1]) {
+			vbi_gen->data[1].data[0] = dev->vbi_out_cc[1][0];
+			vbi_gen->data[1].data[1] = dev->vbi_out_cc[1][1];
+		} else {
+			vbi_gen->data[1].id = 0;
+		}
+	}
+}
+
+static void vivid_g_fmt_vbi_cap(struct vivid_dev *dev, struct v4l2_vbi_format *vbi)
+{
+	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
+
+	vbi->sampling_rate = 27000000;
+	vbi->offset = 24;
+	vbi->samples_per_line = 1440;
+	vbi->sample_format = V4L2_PIX_FMT_GREY;
+	vbi->start[0] = is_60hz ? V4L2_VBI_ITU_525_F1_START + 9 : V4L2_VBI_ITU_625_F1_START + 5;
+	vbi->start[1] = is_60hz ? V4L2_VBI_ITU_525_F2_START + 9 : V4L2_VBI_ITU_625_F2_START + 5;
+	vbi->count[0] = vbi->count[1] = is_60hz ? 12 : 18;
+	vbi->flags = dev->vbi_cap_interlaced ? V4L2_VBI_INTERLACED : 0;
+	vbi->reserved[0] = 0;
+	vbi->reserved[1] = 0;
+}
+
+void vivid_raw_vbi_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf)
+{
+	struct v4l2_vbi_format vbi;
+	u8 *vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+
+	vivid_g_fmt_vbi_cap(dev, &vbi);
+	buf->vb.sequence = dev->vbi_cap_seq_count;
+	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
+		buf->vb.sequence /= 2;
+
+	vivid_sliced_vbi_cap_fill(dev, buf->vb.sequence);
+
+	memset(vbuf, 0x10, vb2_plane_size(&buf->vb.vb2_buf, 0));
+
+	if (!VIVID_INVALID_SIGNAL(dev->std_signal_mode[dev->input]))
+		vivid_vbi_gen_raw(&dev->vbi_gen, &vbi, vbuf);
+}
+
+
+void vivid_sliced_vbi_cap_process(struct vivid_dev *dev,
+			struct vivid_buffer *buf)
+{
+	struct v4l2_sliced_vbi_data *vbuf =
+			vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+
+	buf->vb.sequence = dev->vbi_cap_seq_count;
+	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
+		buf->vb.sequence /= 2;
+
+	vivid_sliced_vbi_cap_fill(dev, buf->vb.sequence);
+
+	memset(vbuf, 0, vb2_plane_size(&buf->vb.vb2_buf, 0));
+	if (!VIVID_INVALID_SIGNAL(dev->std_signal_mode[dev->input])) {
+		unsigned i;
+
+		for (i = 0; i < 25; i++)
+			vbuf[i] = dev->vbi_gen.data[i];
+	}
+}
+
+static int vbi_cap_queue_setup(struct vb2_queue *vq,
+		       unsigned *nbuffers, unsigned *nplanes,
+		       unsigned sizes[], struct device *alloc_devs[])
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
+	unsigned size = vq->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE ?
+		36 * sizeof(struct v4l2_sliced_vbi_data) :
+		1440 * 2 * (is_60hz ? 12 : 18);
+
+	if (!vivid_is_sdtv_cap(dev))
+		return -EINVAL;
+
+	sizes[0] = size;
+
+	if (vq->num_buffers + *nbuffers < 2)
+		*nbuffers = 2 - vq->num_buffers;
+
+	*nplanes = 1;
+	return 0;
+}
+
+static int vbi_cap_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
+	unsigned size = vb->vb2_queue->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE ?
+		36 * sizeof(struct v4l2_sliced_vbi_data) :
+		1440 * 2 * (is_60hz ? 12 : 18);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->buf_prepare_error) {
+		/*
+		 * Error injection: test what happens if buf_prepare() returns
+		 * an error.
+		 */
+		dev->buf_prepare_error = false;
+		return -EINVAL;
+	}
+	if (vb2_plane_size(vb, 0) < size) {
+		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
+				__func__, vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+	vb2_set_plane_payload(vb, 0, size);
+
+	return 0;
+}
+
+static void vbi_cap_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	spin_lock(&dev->slock);
+	list_add_tail(&buf->list, &dev->vbi_cap_active);
+	spin_unlock(&dev->slock);
+}
+
+static int vbi_cap_start_streaming(struct vb2_queue *vq, unsigned count)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	int err;
+
+	dprintk(dev, 1, "%s\n", __func__);
+	dev->vbi_cap_seq_count = 0;
+	if (dev->start_streaming_error) {
+		dev->start_streaming_error = false;
+		err = -EINVAL;
+	} else {
+		err = vivid_start_generating_vid_cap(dev, &dev->vbi_cap_streaming);
+	}
+	if (err) {
+		struct vivid_buffer *buf, *tmp;
+
+		list_for_each_entry_safe(buf, tmp, &dev->vbi_cap_active, list) {
+			list_del(&buf->list);
+			vb2_buffer_done(&buf->vb.vb2_buf,
+					VB2_BUF_STATE_QUEUED);
+		}
+	}
+	return err;
+}
+
+/* abort streaming and wait for last buffer */
+static void vbi_cap_stop_streaming(struct vb2_queue *vq)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+
+	dprintk(dev, 1, "%s\n", __func__);
+	vivid_stop_generating_vid_cap(dev, &dev->vbi_cap_streaming);
+}
+
+static void vbi_cap_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_vbi_cap);
+}
+
+const struct vb2_ops vivid_vbi_cap_qops = {
+	.queue_setup		= vbi_cap_queue_setup,
+	.buf_prepare		= vbi_cap_buf_prepare,
+	.buf_queue		= vbi_cap_buf_queue,
+	.start_streaming	= vbi_cap_start_streaming,
+	.stop_streaming		= vbi_cap_stop_streaming,
+	.buf_request_complete	= vbi_cap_buf_request_complete,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_vbi_format *vbi = &f->fmt.vbi;
+
+	if (!vivid_is_sdtv_cap(dev) || !dev->has_raw_vbi_cap)
+		return -EINVAL;
+
+	vivid_g_fmt_vbi_cap(dev, vbi);
+	return 0;
+}
+
+int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	int ret = vidioc_g_fmt_vbi_cap(file, priv, f);
+
+	if (ret)
+		return ret;
+	if (dev->stream_sliced_vbi_cap && vb2_is_busy(&dev->vb_vbi_cap_q))
+		return -EBUSY;
+	dev->stream_sliced_vbi_cap = false;
+	dev->vbi_cap_dev.queue->type = V4L2_BUF_TYPE_VBI_CAPTURE;
+	return 0;
+}
+
+void vivid_fill_service_lines(struct v4l2_sliced_vbi_format *vbi, u32 service_set)
+{
+	vbi->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36;
+	vbi->service_set = service_set;
+	memset(vbi->service_lines, 0, sizeof(vbi->service_lines));
+	memset(vbi->reserved, 0, sizeof(vbi->reserved));
+
+	if (vbi->service_set == 0)
+		return;
+
+	if (vbi->service_set & V4L2_SLICED_CAPTION_525) {
+		vbi->service_lines[0][21] = V4L2_SLICED_CAPTION_525;
+		vbi->service_lines[1][21] = V4L2_SLICED_CAPTION_525;
+	}
+	if (vbi->service_set & V4L2_SLICED_WSS_625) {
+		unsigned i;
+
+		for (i = 7; i <= 18; i++)
+			vbi->service_lines[0][i] =
+			vbi->service_lines[1][i] = V4L2_SLICED_TELETEXT_B;
+		vbi->service_lines[0][23] = V4L2_SLICED_WSS_625;
+	}
+}
+
+int vidioc_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
+
+	if (!vivid_is_sdtv_cap(dev) || !dev->has_sliced_vbi_cap)
+		return -EINVAL;
+
+	vivid_fill_service_lines(vbi, dev->service_set_cap);
+	return 0;
+}
+
+int vidioc_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
+	bool is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
+	u32 service_set = vbi->service_set;
+
+	if (!vivid_is_sdtv_cap(dev) || !dev->has_sliced_vbi_cap)
+		return -EINVAL;
+
+	service_set &= is_60hz ? V4L2_SLICED_CAPTION_525 :
+				 V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
+	vivid_fill_service_lines(vbi, service_set);
+	return 0;
+}
+
+int vidioc_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
+	int ret = vidioc_try_fmt_sliced_vbi_cap(file, fh, fmt);
+
+	if (ret)
+		return ret;
+	if (!dev->stream_sliced_vbi_cap && vb2_is_busy(&dev->vb_vbi_cap_q))
+		return -EBUSY;
+	dev->service_set_cap = vbi->service_set;
+	dev->stream_sliced_vbi_cap = true;
+	dev->vbi_cap_dev.queue->type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
+	return 0;
+}
+
+int vidioc_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced_vbi_cap *cap)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+	bool is_60hz;
+
+	if (vdev->vfl_dir == VFL_DIR_RX) {
+		is_60hz = dev->std_cap[dev->input] & V4L2_STD_525_60;
+		if (!vivid_is_sdtv_cap(dev) || !dev->has_sliced_vbi_cap ||
+		    cap->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+			return -EINVAL;
+	} else {
+		is_60hz = dev->std_out & V4L2_STD_525_60;
+		if (!vivid_is_svid_out(dev) || !dev->has_sliced_vbi_out ||
+		    cap->type != V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
+			return -EINVAL;
+	}
+
+	cap->service_set = is_60hz ? V4L2_SLICED_CAPTION_525 :
+				     V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
+	if (is_60hz) {
+		cap->service_lines[0][21] = V4L2_SLICED_CAPTION_525;
+		cap->service_lines[1][21] = V4L2_SLICED_CAPTION_525;
+	} else {
+		unsigned i;
+
+		for (i = 7; i <= 18; i++)
+			cap->service_lines[0][i] =
+			cap->service_lines[1][i] = V4L2_SLICED_TELETEXT_B;
+		cap->service_lines[0][23] = V4L2_SLICED_WSS_625;
+	}
+	return 0;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-vbi-cap.h b/drivers/media/test-drivers/vivid/vivid-vbi-cap.h
new file mode 100644
index 000000000000..91d2de01381c
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vbi-cap.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-vbi-cap.h - vbi capture support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_VBI_CAP_H_
+#define _VIVID_VBI_CAP_H_
+
+void vivid_fill_time_of_day_packet(u8 *packet);
+void vivid_raw_vbi_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf);
+void vivid_sliced_vbi_cap_process(struct vivid_dev *dev, struct vivid_buffer *buf);
+void vivid_sliced_vbi_out_process(struct vivid_dev *dev, struct vivid_buffer *buf);
+int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
+					struct v4l2_format *f);
+int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
+					struct v4l2_format *f);
+int vidioc_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt);
+int vidioc_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt);
+int vidioc_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt);
+int vidioc_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced_vbi_cap *cap);
+
+void vivid_fill_service_lines(struct v4l2_sliced_vbi_format *vbi, u32 service_set);
+
+extern const struct vb2_ops vivid_vbi_cap_qops;
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-vbi-gen.c b/drivers/media/test-drivers/vivid/vivid-vbi-gen.c
new file mode 100644
index 000000000000..acc98445a1fa
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vbi-gen.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-vbi-gen.c - vbi generator support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/string.h>
+#include <linux/videodev2.h>
+
+#include "vivid-vbi-gen.h"
+
+static void wss_insert(u8 *wss, u32 val, unsigned size)
+{
+	while (size--)
+		*wss++ = (val & (1 << size)) ? 0xc0 : 0x10;
+}
+
+static void vivid_vbi_gen_wss_raw(const struct v4l2_sliced_vbi_data *data,
+		u8 *buf, unsigned sampling_rate)
+{
+	const unsigned rate = 5000000;	/* WSS has a 5 MHz transmission rate */
+	u8 wss[29 + 24 + 24 + 24 + 18 + 18] = { 0 };
+	const unsigned zero = 0x07;
+	const unsigned one = 0x38;
+	unsigned bit = 0;
+	u16 wss_data;
+	int i;
+
+	wss_insert(wss + bit, 0x1f1c71c7, 29); bit += 29;
+	wss_insert(wss + bit, 0x1e3c1f, 24); bit += 24;
+
+	wss_data = (data->data[1] << 8) | data->data[0];
+	for (i = 0; i <= 13; i++, bit += 6)
+		wss_insert(wss + bit, (wss_data & (1 << i)) ? one : zero, 6);
+
+	for (i = 0, bit = 0; bit < sizeof(wss); bit++) {
+		unsigned n = ((bit + 1) * sampling_rate) / rate;
+
+		while (i < n)
+			buf[i++] = wss[bit];
+	}
+}
+
+static void vivid_vbi_gen_teletext_raw(const struct v4l2_sliced_vbi_data *data,
+		u8 *buf, unsigned sampling_rate)
+{
+	const unsigned rate = 6937500 / 10;	/* Teletext has a 6.9375 MHz transmission rate */
+	u8 teletext[45] = { 0x55, 0x55, 0x27 };
+	unsigned bit = 0;
+	int i;
+
+	memcpy(teletext + 3, data->data, sizeof(teletext) - 3);
+	/* prevents 32 bit overflow */
+	sampling_rate /= 10;
+
+	for (i = 0, bit = 0; bit < sizeof(teletext) * 8; bit++) {
+		unsigned n = ((bit + 1) * sampling_rate) / rate;
+		u8 val = (teletext[bit / 8] & (1 << (bit & 7))) ? 0xc0 : 0x10;
+
+		while (i < n)
+			buf[i++] = val;
+	}
+}
+
+static void cc_insert(u8 *cc, u8 ch)
+{
+	unsigned tot = 0;
+	unsigned i;
+
+	for (i = 0; i < 7; i++) {
+		cc[2 * i] = cc[2 * i + 1] = (ch & (1 << i)) ? 1 : 0;
+		tot += cc[2 * i];
+	}
+	cc[14] = cc[15] = !(tot & 1);
+}
+
+#define CC_PREAMBLE_BITS (14 + 4 + 2)
+
+static void vivid_vbi_gen_cc_raw(const struct v4l2_sliced_vbi_data *data,
+		u8 *buf, unsigned sampling_rate)
+{
+	const unsigned rate = 1000000;	/* CC has a 1 MHz transmission rate */
+
+	u8 cc[CC_PREAMBLE_BITS + 2 * 16] = {
+		/* Clock run-in: 7 cycles */
+		0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
+		/* 2 cycles of 0 */
+		0, 0, 0, 0,
+		/* Start bit of 1 (each bit is two cycles) */
+		1, 1
+	};
+	unsigned bit, i;
+
+	cc_insert(cc + CC_PREAMBLE_BITS, data->data[0]);
+	cc_insert(cc + CC_PREAMBLE_BITS + 16, data->data[1]);
+
+	for (i = 0, bit = 0; bit < sizeof(cc); bit++) {
+		unsigned n = ((bit + 1) * sampling_rate) / rate;
+
+		while (i < n)
+			buf[i++] = cc[bit] ? 0xc0 : 0x10;
+	}
+}
+
+void vivid_vbi_gen_raw(const struct vivid_vbi_gen_data *vbi,
+		const struct v4l2_vbi_format *vbi_fmt, u8 *buf)
+{
+	unsigned idx;
+
+	for (idx = 0; idx < 25; idx++) {
+		const struct v4l2_sliced_vbi_data *data = vbi->data + idx;
+		unsigned start_2nd_field;
+		unsigned line = data->line;
+		u8 *linebuf = buf;
+
+		start_2nd_field = (data->id & V4L2_SLICED_VBI_525) ? 263 : 313;
+		if (data->field)
+			line += start_2nd_field;
+		line -= vbi_fmt->start[data->field];
+
+		if (vbi_fmt->flags & V4L2_VBI_INTERLACED)
+			linebuf += (line * 2 + data->field) *
+				vbi_fmt->samples_per_line;
+		else
+			linebuf += (line + data->field * vbi_fmt->count[0]) *
+				vbi_fmt->samples_per_line;
+		if (data->id == V4L2_SLICED_CAPTION_525)
+			vivid_vbi_gen_cc_raw(data, linebuf, vbi_fmt->sampling_rate);
+		else if (data->id == V4L2_SLICED_WSS_625)
+			vivid_vbi_gen_wss_raw(data, linebuf, vbi_fmt->sampling_rate);
+		else if (data->id == V4L2_SLICED_TELETEXT_B)
+			vivid_vbi_gen_teletext_raw(data, linebuf, vbi_fmt->sampling_rate);
+	}
+}
+
+static const u8 vivid_cc_sequence1[30] = {
+	0x14, 0x20,	/* Resume Caption Loading */
+	'H',  'e',
+	'l',  'l',
+	'o',  ' ',
+	'w',  'o',
+	'r',  'l',
+	'd',  '!',
+	0x14, 0x2f,	/* End of Caption */
+};
+
+static const u8 vivid_cc_sequence2[30] = {
+	0x14, 0x20,	/* Resume Caption Loading */
+	'C',  'l',
+	'o',  's',
+	'e',  'd',
+	' ',  'c',
+	'a',  'p',
+	't',  'i',
+	'o',  'n',
+	's',  ' ',
+	't',  'e',
+	's',  't',
+	0x14, 0x2f,	/* End of Caption */
+};
+
+static u8 calc_parity(u8 val)
+{
+	unsigned i;
+	unsigned tot = 0;
+
+	for (i = 0; i < 7; i++)
+		tot += (val & (1 << i)) ? 1 : 0;
+	return val | ((tot & 1) ? 0 : 0x80);
+}
+
+static void vivid_vbi_gen_set_time_of_day(u8 *packet)
+{
+	struct tm tm;
+	u8 checksum, i;
+
+	time64_to_tm(ktime_get_real_seconds(), 0, &tm);
+	packet[0] = calc_parity(0x07);
+	packet[1] = calc_parity(0x01);
+	packet[2] = calc_parity(0x40 | tm.tm_min);
+	packet[3] = calc_parity(0x40 | tm.tm_hour);
+	packet[4] = calc_parity(0x40 | tm.tm_mday);
+	if (tm.tm_mday == 1 && tm.tm_mon == 2 &&
+	    sys_tz.tz_minuteswest > tm.tm_min + tm.tm_hour * 60)
+		packet[4] = calc_parity(0x60 | tm.tm_mday);
+	packet[5] = calc_parity(0x40 | (1 + tm.tm_mon));
+	packet[6] = calc_parity(0x40 | (1 + tm.tm_wday));
+	packet[7] = calc_parity(0x40 | ((tm.tm_year - 90) & 0x3f));
+	packet[8] = calc_parity(0x0f);
+	for (checksum = i = 0; i <= 8; i++)
+		checksum += packet[i] & 0x7f;
+	packet[9] = calc_parity(0x100 - checksum);
+	checksum = 0;
+	packet[10] = calc_parity(0x07);
+	packet[11] = calc_parity(0x04);
+	if (sys_tz.tz_minuteswest >= 0)
+		packet[12] = calc_parity(0x40 | ((sys_tz.tz_minuteswest / 60) & 0x1f));
+	else
+		packet[12] = calc_parity(0x40 | ((24 + sys_tz.tz_minuteswest / 60) & 0x1f));
+	packet[13] = calc_parity(0);
+	packet[14] = calc_parity(0x0f);
+	for (checksum = 0, i = 10; i <= 14; i++)
+		checksum += packet[i] & 0x7f;
+	packet[15] = calc_parity(0x100 - checksum);
+}
+
+static const u8 hamming[16] = {
+	0x15, 0x02, 0x49, 0x5e, 0x64, 0x73, 0x38, 0x2f,
+	0xd0, 0xc7, 0x8c, 0x9b, 0xa1, 0xb6, 0xfd, 0xea
+};
+
+static void vivid_vbi_gen_teletext(u8 *packet, unsigned line, unsigned frame)
+{
+	unsigned offset = 2;
+	unsigned i;
+
+	packet[0] = hamming[1 + ((line & 1) << 3)];
+	packet[1] = hamming[line >> 1];
+	memset(packet + 2, 0x20, 40);
+	if (line == 0) {
+		/* subcode */
+		packet[2] = hamming[frame % 10];
+		packet[3] = hamming[frame / 10];
+		packet[4] = hamming[0];
+		packet[5] = hamming[0];
+		packet[6] = hamming[0];
+		packet[7] = hamming[0];
+		packet[8] = hamming[0];
+		packet[9] = hamming[1];
+		offset = 10;
+	}
+	packet += offset;
+	memcpy(packet, "Page: 100 Row: 10", 17);
+	packet[7] = '0' + frame / 10;
+	packet[8] = '0' + frame % 10;
+	packet[15] = '0' + line / 10;
+	packet[16] = '0' + line % 10;
+	for (i = 0; i < 42 - offset; i++)
+		packet[i] = calc_parity(packet[i]);
+}
+
+void vivid_vbi_gen_sliced(struct vivid_vbi_gen_data *vbi,
+		bool is_60hz, unsigned seqnr)
+{
+	struct v4l2_sliced_vbi_data *data0 = vbi->data;
+	struct v4l2_sliced_vbi_data *data1 = vbi->data + 1;
+	unsigned frame = seqnr % 60;
+
+	memset(vbi->data, 0, sizeof(vbi->data));
+
+	if (!is_60hz) {
+		unsigned i;
+
+		for (i = 0; i <= 11; i++) {
+			data0->id = V4L2_SLICED_TELETEXT_B;
+			data0->line = 7 + i;
+			vivid_vbi_gen_teletext(data0->data, i, frame);
+			data0++;
+		}
+		data0->id = V4L2_SLICED_WSS_625;
+		data0->line = 23;
+		/* 4x3 video aspect ratio */
+		data0->data[0] = 0x08;
+		data0++;
+		for (i = 0; i <= 11; i++) {
+			data0->id = V4L2_SLICED_TELETEXT_B;
+			data0->field = 1;
+			data0->line = 7 + i;
+			vivid_vbi_gen_teletext(data0->data, 12 + i, frame);
+			data0++;
+		}
+		return;
+	}
+
+	data0->id = V4L2_SLICED_CAPTION_525;
+	data0->line = 21;
+	data1->id = V4L2_SLICED_CAPTION_525;
+	data1->field = 1;
+	data1->line = 21;
+
+	if (frame < 15) {
+		data0->data[0] = calc_parity(vivid_cc_sequence1[2 * frame]);
+		data0->data[1] = calc_parity(vivid_cc_sequence1[2 * frame + 1]);
+	} else if (frame >= 30 && frame < 45) {
+		frame -= 30;
+		data0->data[0] = calc_parity(vivid_cc_sequence2[2 * frame]);
+		data0->data[1] = calc_parity(vivid_cc_sequence2[2 * frame + 1]);
+	} else {
+		data0->data[0] = calc_parity(0);
+		data0->data[1] = calc_parity(0);
+	}
+
+	frame = seqnr % (30 * 60);
+	switch (frame) {
+	case 0:
+		vivid_vbi_gen_set_time_of_day(vbi->time_of_day_packet);
+		/* fall through */
+	case 1 ... 7:
+		data1->data[0] = vbi->time_of_day_packet[frame * 2];
+		data1->data[1] = vbi->time_of_day_packet[frame * 2 + 1];
+		break;
+	default:
+		data1->data[0] = calc_parity(0);
+		data1->data[1] = calc_parity(0);
+		break;
+	}
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-vbi-gen.h b/drivers/media/test-drivers/vivid/vivid-vbi-gen.h
new file mode 100644
index 000000000000..2657a7f5571c
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vbi-gen.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-vbi-gen.h - vbi generator support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_VBI_GEN_H_
+#define _VIVID_VBI_GEN_H_
+
+struct vivid_vbi_gen_data {
+	struct v4l2_sliced_vbi_data data[25];
+	u8 time_of_day_packet[16];
+};
+
+void vivid_vbi_gen_sliced(struct vivid_vbi_gen_data *vbi,
+		bool is_60hz, unsigned seqnr);
+void vivid_vbi_gen_raw(const struct vivid_vbi_gen_data *vbi,
+		const struct v4l2_vbi_format *vbi_fmt, u8 *buf);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-vbi-out.c b/drivers/media/test-drivers/vivid/vivid-vbi-out.c
new file mode 100644
index 000000000000..cd56476902a2
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vbi-out.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-vbi-out.c - vbi output support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+
+#include "vivid-core.h"
+#include "vivid-kthread-out.h"
+#include "vivid-vbi-out.h"
+#include "vivid-vbi-cap.h"
+
+static int vbi_out_queue_setup(struct vb2_queue *vq,
+		       unsigned *nbuffers, unsigned *nplanes,
+		       unsigned sizes[], struct device *alloc_devs[])
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	bool is_60hz = dev->std_out & V4L2_STD_525_60;
+	unsigned size = vq->type == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT ?
+		36 * sizeof(struct v4l2_sliced_vbi_data) :
+		1440 * 2 * (is_60hz ? 12 : 18);
+
+	if (!vivid_is_svid_out(dev))
+		return -EINVAL;
+
+	sizes[0] = size;
+
+	if (vq->num_buffers + *nbuffers < 2)
+		*nbuffers = 2 - vq->num_buffers;
+
+	*nplanes = 1;
+	return 0;
+}
+
+static int vbi_out_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	bool is_60hz = dev->std_out & V4L2_STD_525_60;
+	unsigned size = vb->vb2_queue->type == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT ?
+		36 * sizeof(struct v4l2_sliced_vbi_data) :
+		1440 * 2 * (is_60hz ? 12 : 18);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->buf_prepare_error) {
+		/*
+		 * Error injection: test what happens if buf_prepare() returns
+		 * an error.
+		 */
+		dev->buf_prepare_error = false;
+		return -EINVAL;
+	}
+	if (vb2_plane_size(vb, 0) < size) {
+		dprintk(dev, 1, "%s data will not fit into plane (%lu < %u)\n",
+				__func__, vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+	vb2_set_plane_payload(vb, 0, size);
+
+	return 0;
+}
+
+static void vbi_out_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	spin_lock(&dev->slock);
+	list_add_tail(&buf->list, &dev->vbi_out_active);
+	spin_unlock(&dev->slock);
+}
+
+static int vbi_out_start_streaming(struct vb2_queue *vq, unsigned count)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	int err;
+
+	dprintk(dev, 1, "%s\n", __func__);
+	dev->vbi_out_seq_count = 0;
+	if (dev->start_streaming_error) {
+		dev->start_streaming_error = false;
+		err = -EINVAL;
+	} else {
+		err = vivid_start_generating_vid_out(dev, &dev->vbi_out_streaming);
+	}
+	if (err) {
+		struct vivid_buffer *buf, *tmp;
+
+		list_for_each_entry_safe(buf, tmp, &dev->vbi_out_active, list) {
+			list_del(&buf->list);
+			vb2_buffer_done(&buf->vb.vb2_buf,
+					VB2_BUF_STATE_QUEUED);
+		}
+	}
+	return err;
+}
+
+/* abort streaming and wait for last buffer */
+static void vbi_out_stop_streaming(struct vb2_queue *vq)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+
+	dprintk(dev, 1, "%s\n", __func__);
+	vivid_stop_generating_vid_out(dev, &dev->vbi_out_streaming);
+	dev->vbi_out_have_wss = false;
+	dev->vbi_out_have_cc[0] = false;
+	dev->vbi_out_have_cc[1] = false;
+}
+
+static void vbi_out_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_vbi_out);
+}
+
+const struct vb2_ops vivid_vbi_out_qops = {
+	.queue_setup		= vbi_out_queue_setup,
+	.buf_prepare		= vbi_out_buf_prepare,
+	.buf_queue		= vbi_out_buf_queue,
+	.start_streaming	= vbi_out_start_streaming,
+	.stop_streaming		= vbi_out_stop_streaming,
+	.buf_request_complete	= vbi_out_buf_request_complete,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+int vidioc_g_fmt_vbi_out(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_vbi_format *vbi = &f->fmt.vbi;
+	bool is_60hz = dev->std_out & V4L2_STD_525_60;
+
+	if (!vivid_is_svid_out(dev) || !dev->has_raw_vbi_out)
+		return -EINVAL;
+
+	vbi->sampling_rate = 25000000;
+	vbi->offset = 24;
+	vbi->samples_per_line = 1440;
+	vbi->sample_format = V4L2_PIX_FMT_GREY;
+	vbi->start[0] = is_60hz ? V4L2_VBI_ITU_525_F1_START + 9 : V4L2_VBI_ITU_625_F1_START + 5;
+	vbi->start[1] = is_60hz ? V4L2_VBI_ITU_525_F2_START + 9 : V4L2_VBI_ITU_625_F2_START + 5;
+	vbi->count[0] = vbi->count[1] = is_60hz ? 12 : 18;
+	vbi->flags = dev->vbi_cap_interlaced ? V4L2_VBI_INTERLACED : 0;
+	vbi->reserved[0] = 0;
+	vbi->reserved[1] = 0;
+	return 0;
+}
+
+int vidioc_s_fmt_vbi_out(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	int ret = vidioc_g_fmt_vbi_out(file, priv, f);
+
+	if (ret)
+		return ret;
+	if (vb2_is_busy(&dev->vb_vbi_out_q))
+		return -EBUSY;
+	dev->stream_sliced_vbi_out = false;
+	dev->vbi_out_dev.queue->type = V4L2_BUF_TYPE_VBI_OUTPUT;
+	return 0;
+}
+
+int vidioc_g_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
+
+	if (!vivid_is_svid_out(dev) || !dev->has_sliced_vbi_out)
+		return -EINVAL;
+
+	vivid_fill_service_lines(vbi, dev->service_set_out);
+	return 0;
+}
+
+int vidioc_try_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
+	bool is_60hz = dev->std_out & V4L2_STD_525_60;
+	u32 service_set = vbi->service_set;
+
+	if (!vivid_is_svid_out(dev) || !dev->has_sliced_vbi_out)
+		return -EINVAL;
+
+	service_set &= is_60hz ? V4L2_SLICED_CAPTION_525 :
+				 V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
+	vivid_fill_service_lines(vbi, service_set);
+	return 0;
+}
+
+int vidioc_s_fmt_sliced_vbi_out(struct file *file, void *fh,
+		struct v4l2_format *fmt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_sliced_vbi_format *vbi = &fmt->fmt.sliced;
+	int ret = vidioc_try_fmt_sliced_vbi_out(file, fh, fmt);
+
+	if (ret)
+		return ret;
+	if (vb2_is_busy(&dev->vb_vbi_out_q))
+		return -EBUSY;
+	dev->service_set_out = vbi->service_set;
+	dev->stream_sliced_vbi_out = true;
+	dev->vbi_out_dev.queue->type = V4L2_BUF_TYPE_SLICED_VBI_OUTPUT;
+	return 0;
+}
+
+void vivid_sliced_vbi_out_process(struct vivid_dev *dev,
+		struct vivid_buffer *buf)
+{
+	struct v4l2_sliced_vbi_data *vbi =
+		vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+	unsigned elems =
+		vb2_get_plane_payload(&buf->vb.vb2_buf, 0) / sizeof(*vbi);
+
+	dev->vbi_out_have_cc[0] = false;
+	dev->vbi_out_have_cc[1] = false;
+	dev->vbi_out_have_wss = false;
+	while (elems--) {
+		switch (vbi->id) {
+		case V4L2_SLICED_CAPTION_525:
+			if ((dev->std_out & V4L2_STD_525_60) && vbi->line == 21) {
+				dev->vbi_out_have_cc[!!vbi->field] = true;
+				dev->vbi_out_cc[!!vbi->field][0] = vbi->data[0];
+				dev->vbi_out_cc[!!vbi->field][1] = vbi->data[1];
+			}
+			break;
+		case V4L2_SLICED_WSS_625:
+			if ((dev->std_out & V4L2_STD_625_50) &&
+			    vbi->field == 0 && vbi->line == 23) {
+				dev->vbi_out_have_wss = true;
+				dev->vbi_out_wss[0] = vbi->data[0];
+				dev->vbi_out_wss[1] = vbi->data[1];
+			}
+			break;
+		}
+		vbi++;
+	}
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-vbi-out.h b/drivers/media/test-drivers/vivid/vivid-vbi-out.h
new file mode 100644
index 000000000000..76584940cdaf
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vbi-out.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-vbi-out.h - vbi output support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_VBI_OUT_H_
+#define _VIVID_VBI_OUT_H_
+
+void vivid_sliced_vbi_out_process(struct vivid_dev *dev, struct vivid_buffer *buf);
+int vidioc_g_fmt_vbi_out(struct file *file, void *priv,
+					struct v4l2_format *f);
+int vidioc_s_fmt_vbi_out(struct file *file, void *priv,
+					struct v4l2_format *f);
+int vidioc_g_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt);
+int vidioc_try_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt);
+int vidioc_s_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt);
+
+extern const struct vb2_ops vivid_vbi_out_qops;
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-vid-cap.c b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
new file mode 100644
index 000000000000..e94beef008c8
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
@@ -0,0 +1,1918 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-vid-cap.c - video capture support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-dv-timings.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-rect.h>
+
+#include "vivid-core.h"
+#include "vivid-vid-common.h"
+#include "vivid-kthread-cap.h"
+#include "vivid-vid-cap.h"
+
+static const struct vivid_fmt formats_ovl[] = {
+	{
+		.fourcc   = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_XRGB555, /* gggbbbbb arrrrrgg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_ARGB555, /* gggbbbbb arrrrrgg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+};
+
+/* The number of discrete webcam framesizes */
+#define VIVID_WEBCAM_SIZES 6
+/* The number of discrete webcam frameintervals */
+#define VIVID_WEBCAM_IVALS (VIVID_WEBCAM_SIZES * 2)
+
+/* Sizes must be in increasing order */
+static const struct v4l2_frmsize_discrete webcam_sizes[VIVID_WEBCAM_SIZES] = {
+	{  320, 180 },
+	{  640, 360 },
+	{  640, 480 },
+	{ 1280, 720 },
+	{ 1920, 1080 },
+	{ 3840, 2160 },
+};
+
+/*
+ * Intervals must be in increasing order and there must be twice as many
+ * elements in this array as there are in webcam_sizes.
+ */
+static const struct v4l2_fract webcam_intervals[VIVID_WEBCAM_IVALS] = {
+	{  1, 1 },
+	{  1, 2 },
+	{  1, 4 },
+	{  1, 5 },
+	{  1, 10 },
+	{  2, 25 },
+	{  1, 15 },
+	{  1, 25 },
+	{  1, 30 },
+	{  1, 40 },
+	{  1, 50 },
+	{  1, 60 },
+};
+
+static int vid_cap_queue_setup(struct vb2_queue *vq,
+		       unsigned *nbuffers, unsigned *nplanes,
+		       unsigned sizes[], struct device *alloc_devs[])
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	unsigned buffers = tpg_g_buffers(&dev->tpg);
+	unsigned h = dev->fmt_cap_rect.height;
+	unsigned p;
+
+	if (dev->field_cap == V4L2_FIELD_ALTERNATE) {
+		/*
+		 * You cannot use read() with FIELD_ALTERNATE since the field
+		 * information (TOP/BOTTOM) cannot be passed back to the user.
+		 */
+		if (vb2_fileio_is_active(vq))
+			return -EINVAL;
+	}
+
+	if (dev->queue_setup_error) {
+		/*
+		 * Error injection: test what happens if queue_setup() returns
+		 * an error.
+		 */
+		dev->queue_setup_error = false;
+		return -EINVAL;
+	}
+	if (*nplanes) {
+		/*
+		 * Check if the number of requested planes match
+		 * the number of buffers in the current format. You can't mix that.
+		 */
+		if (*nplanes != buffers)
+			return -EINVAL;
+		for (p = 0; p < buffers; p++) {
+			if (sizes[p] < tpg_g_line_width(&dev->tpg, p) * h +
+						dev->fmt_cap->data_offset[p])
+				return -EINVAL;
+		}
+	} else {
+		for (p = 0; p < buffers; p++)
+			sizes[p] = (tpg_g_line_width(&dev->tpg, p) * h) /
+					dev->fmt_cap->vdownsampling[p] +
+					dev->fmt_cap->data_offset[p];
+	}
+
+	if (vq->num_buffers + *nbuffers < 2)
+		*nbuffers = 2 - vq->num_buffers;
+
+	*nplanes = buffers;
+
+	dprintk(dev, 1, "%s: count=%d\n", __func__, *nbuffers);
+	for (p = 0; p < buffers; p++)
+		dprintk(dev, 1, "%s: size[%u]=%u\n", __func__, p, sizes[p]);
+
+	return 0;
+}
+
+static int vid_cap_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned long size;
+	unsigned buffers = tpg_g_buffers(&dev->tpg);
+	unsigned p;
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (WARN_ON(NULL == dev->fmt_cap))
+		return -EINVAL;
+
+	if (dev->buf_prepare_error) {
+		/*
+		 * Error injection: test what happens if buf_prepare() returns
+		 * an error.
+		 */
+		dev->buf_prepare_error = false;
+		return -EINVAL;
+	}
+	for (p = 0; p < buffers; p++) {
+		size = (tpg_g_line_width(&dev->tpg, p) *
+			dev->fmt_cap_rect.height) /
+			dev->fmt_cap->vdownsampling[p] +
+			dev->fmt_cap->data_offset[p];
+
+		if (vb2_plane_size(vb, p) < size) {
+			dprintk(dev, 1, "%s data will not fit into plane %u (%lu < %lu)\n",
+					__func__, p, vb2_plane_size(vb, p), size);
+			return -EINVAL;
+		}
+
+		vb2_set_plane_payload(vb, p, size);
+		vb->planes[p].data_offset = dev->fmt_cap->data_offset[p];
+	}
+
+	return 0;
+}
+
+static void vid_cap_buf_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct v4l2_timecode *tc = &vbuf->timecode;
+	unsigned fps = 25;
+	unsigned seq = vbuf->sequence;
+
+	if (!vivid_is_sdtv_cap(dev))
+		return;
+
+	/*
+	 * Set the timecode. Rarely used, so it is interesting to
+	 * test this.
+	 */
+	vbuf->flags |= V4L2_BUF_FLAG_TIMECODE;
+	if (dev->std_cap[dev->input] & V4L2_STD_525_60)
+		fps = 30;
+	tc->type = (fps == 30) ? V4L2_TC_TYPE_30FPS : V4L2_TC_TYPE_25FPS;
+	tc->flags = 0;
+	tc->frames = seq % fps;
+	tc->seconds = (seq / fps) % 60;
+	tc->minutes = (seq / (60 * fps)) % 60;
+	tc->hours = (seq / (60 * 60 * fps)) % 24;
+}
+
+static void vid_cap_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	spin_lock(&dev->slock);
+	list_add_tail(&buf->list, &dev->vid_cap_active);
+	spin_unlock(&dev->slock);
+}
+
+static int vid_cap_start_streaming(struct vb2_queue *vq, unsigned count)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	unsigned i;
+	int err;
+
+	if (vb2_is_streaming(&dev->vb_vid_out_q))
+		dev->can_loop_video = vivid_vid_can_loop(dev);
+
+	dev->vid_cap_seq_count = 0;
+	dprintk(dev, 1, "%s\n", __func__);
+	for (i = 0; i < VIDEO_MAX_FRAME; i++)
+		dev->must_blank[i] = tpg_g_perc_fill(&dev->tpg) < 100;
+	if (dev->start_streaming_error) {
+		dev->start_streaming_error = false;
+		err = -EINVAL;
+	} else {
+		err = vivid_start_generating_vid_cap(dev, &dev->vid_cap_streaming);
+	}
+	if (err) {
+		struct vivid_buffer *buf, *tmp;
+
+		list_for_each_entry_safe(buf, tmp, &dev->vid_cap_active, list) {
+			list_del(&buf->list);
+			vb2_buffer_done(&buf->vb.vb2_buf,
+					VB2_BUF_STATE_QUEUED);
+		}
+	}
+	return err;
+}
+
+/* abort streaming and wait for last buffer */
+static void vid_cap_stop_streaming(struct vb2_queue *vq)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+
+	dprintk(dev, 1, "%s\n", __func__);
+	vivid_stop_generating_vid_cap(dev, &dev->vid_cap_streaming);
+	dev->can_loop_video = false;
+}
+
+static void vid_cap_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_vid_cap);
+}
+
+const struct vb2_ops vivid_vid_cap_qops = {
+	.queue_setup		= vid_cap_queue_setup,
+	.buf_prepare		= vid_cap_buf_prepare,
+	.buf_finish		= vid_cap_buf_finish,
+	.buf_queue		= vid_cap_buf_queue,
+	.start_streaming	= vid_cap_start_streaming,
+	.stop_streaming		= vid_cap_stop_streaming,
+	.buf_request_complete	= vid_cap_buf_request_complete,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+/*
+ * Determine the 'picture' quality based on the current TV frequency: either
+ * COLOR for a good 'signal', GRAY (grayscale picture) for a slightly off
+ * signal or NOISE for no signal.
+ */
+void vivid_update_quality(struct vivid_dev *dev)
+{
+	unsigned freq_modulus;
+
+	if (dev->loop_video && (vivid_is_svid_cap(dev) || vivid_is_hdmi_cap(dev))) {
+		/*
+		 * The 'noise' will only be replaced by the actual video
+		 * if the output video matches the input video settings.
+		 */
+		tpg_s_quality(&dev->tpg, TPG_QUAL_NOISE, 0);
+		return;
+	}
+	if (vivid_is_hdmi_cap(dev) &&
+	    VIVID_INVALID_SIGNAL(dev->dv_timings_signal_mode[dev->input])) {
+		tpg_s_quality(&dev->tpg, TPG_QUAL_NOISE, 0);
+		return;
+	}
+	if (vivid_is_sdtv_cap(dev) &&
+	    VIVID_INVALID_SIGNAL(dev->std_signal_mode[dev->input])) {
+		tpg_s_quality(&dev->tpg, TPG_QUAL_NOISE, 0);
+		return;
+	}
+	if (!vivid_is_tv_cap(dev)) {
+		tpg_s_quality(&dev->tpg, TPG_QUAL_COLOR, 0);
+		return;
+	}
+
+	/*
+	 * There is a fake channel every 6 MHz at 49.25, 55.25, etc.
+	 * From +/- 0.25 MHz around the channel there is color, and from
+	 * +/- 1 MHz there is grayscale (chroma is lost).
+	 * Everywhere else it is just noise.
+	 */
+	freq_modulus = (dev->tv_freq - 676 /* (43.25-1) * 16 */) % (6 * 16);
+	if (freq_modulus > 2 * 16) {
+		tpg_s_quality(&dev->tpg, TPG_QUAL_NOISE,
+			next_pseudo_random32(dev->tv_freq ^ 0x55) & 0x3f);
+		return;
+	}
+	if (freq_modulus < 12 /*0.75 * 16*/ || freq_modulus > 20 /*1.25 * 16*/)
+		tpg_s_quality(&dev->tpg, TPG_QUAL_GRAY, 0);
+	else
+		tpg_s_quality(&dev->tpg, TPG_QUAL_COLOR, 0);
+}
+
+/*
+ * Get the current picture quality and the associated afc value.
+ */
+static enum tpg_quality vivid_get_quality(struct vivid_dev *dev, s32 *afc)
+{
+	unsigned freq_modulus;
+
+	if (afc)
+		*afc = 0;
+	if (tpg_g_quality(&dev->tpg) == TPG_QUAL_COLOR ||
+	    tpg_g_quality(&dev->tpg) == TPG_QUAL_NOISE)
+		return tpg_g_quality(&dev->tpg);
+
+	/*
+	 * There is a fake channel every 6 MHz at 49.25, 55.25, etc.
+	 * From +/- 0.25 MHz around the channel there is color, and from
+	 * +/- 1 MHz there is grayscale (chroma is lost).
+	 * Everywhere else it is just gray.
+	 */
+	freq_modulus = (dev->tv_freq - 676 /* (43.25-1) * 16 */) % (6 * 16);
+	if (afc)
+		*afc = freq_modulus - 1 * 16;
+	return TPG_QUAL_GRAY;
+}
+
+enum tpg_video_aspect vivid_get_video_aspect(const struct vivid_dev *dev)
+{
+	if (vivid_is_sdtv_cap(dev))
+		return dev->std_aspect_ratio[dev->input];
+
+	if (vivid_is_hdmi_cap(dev))
+		return dev->dv_timings_aspect_ratio[dev->input];
+
+	return TPG_VIDEO_ASPECT_IMAGE;
+}
+
+static enum tpg_pixel_aspect vivid_get_pixel_aspect(const struct vivid_dev *dev)
+{
+	if (vivid_is_sdtv_cap(dev))
+		return (dev->std_cap[dev->input] & V4L2_STD_525_60) ?
+			TPG_PIXEL_ASPECT_NTSC : TPG_PIXEL_ASPECT_PAL;
+
+	if (vivid_is_hdmi_cap(dev) &&
+	    dev->src_rect.width == 720 && dev->src_rect.height <= 576)
+		return dev->src_rect.height == 480 ?
+			TPG_PIXEL_ASPECT_NTSC : TPG_PIXEL_ASPECT_PAL;
+
+	return TPG_PIXEL_ASPECT_SQUARE;
+}
+
+/*
+ * Called whenever the format has to be reset which can occur when
+ * changing inputs, standard, timings, etc.
+ */
+void vivid_update_format_cap(struct vivid_dev *dev, bool keep_controls)
+{
+	struct v4l2_bt_timings *bt = &dev->dv_timings_cap[dev->input].bt;
+	unsigned size;
+	u64 pixelclock;
+
+	switch (dev->input_type[dev->input]) {
+	case WEBCAM:
+	default:
+		dev->src_rect.width = webcam_sizes[dev->webcam_size_idx].width;
+		dev->src_rect.height = webcam_sizes[dev->webcam_size_idx].height;
+		dev->timeperframe_vid_cap = webcam_intervals[dev->webcam_ival_idx];
+		dev->field_cap = V4L2_FIELD_NONE;
+		tpg_s_rgb_range(&dev->tpg, V4L2_DV_RGB_RANGE_AUTO);
+		break;
+	case TV:
+	case SVID:
+		dev->field_cap = dev->tv_field_cap;
+		dev->src_rect.width = 720;
+		if (dev->std_cap[dev->input] & V4L2_STD_525_60) {
+			dev->src_rect.height = 480;
+			dev->timeperframe_vid_cap = (struct v4l2_fract) { 1001, 30000 };
+			dev->service_set_cap = V4L2_SLICED_CAPTION_525;
+		} else {
+			dev->src_rect.height = 576;
+			dev->timeperframe_vid_cap = (struct v4l2_fract) { 1000, 25000 };
+			dev->service_set_cap = V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
+		}
+		tpg_s_rgb_range(&dev->tpg, V4L2_DV_RGB_RANGE_AUTO);
+		break;
+	case HDMI:
+		dev->src_rect.width = bt->width;
+		dev->src_rect.height = bt->height;
+		size = V4L2_DV_BT_FRAME_WIDTH(bt) * V4L2_DV_BT_FRAME_HEIGHT(bt);
+		if (dev->reduced_fps && can_reduce_fps(bt)) {
+			pixelclock = div_u64(bt->pixelclock * 1000, 1001);
+			bt->flags |= V4L2_DV_FL_REDUCED_FPS;
+		} else {
+			pixelclock = bt->pixelclock;
+			bt->flags &= ~V4L2_DV_FL_REDUCED_FPS;
+		}
+		dev->timeperframe_vid_cap = (struct v4l2_fract) {
+			size / 100, (u32)pixelclock / 100
+		};
+		if (bt->interlaced)
+			dev->field_cap = V4L2_FIELD_ALTERNATE;
+		else
+			dev->field_cap = V4L2_FIELD_NONE;
+
+		/*
+		 * We can be called from within s_ctrl, in that case we can't
+		 * set/get controls. Luckily we don't need to in that case.
+		 */
+		if (keep_controls || !dev->colorspace)
+			break;
+		if (bt->flags & V4L2_DV_FL_IS_CE_VIDEO) {
+			if (bt->width == 720 && bt->height <= 576)
+				v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_170M);
+			else
+				v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_709);
+			v4l2_ctrl_s_ctrl(dev->real_rgb_range_cap, 1);
+		} else {
+			v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_SRGB);
+			v4l2_ctrl_s_ctrl(dev->real_rgb_range_cap, 0);
+		}
+		tpg_s_rgb_range(&dev->tpg, v4l2_ctrl_g_ctrl(dev->rgb_range_cap));
+		break;
+	}
+	vfree(dev->bitmap_cap);
+	dev->bitmap_cap = NULL;
+	vivid_update_quality(dev);
+	tpg_reset_source(&dev->tpg, dev->src_rect.width, dev->src_rect.height, dev->field_cap);
+	dev->crop_cap = dev->src_rect;
+	dev->crop_bounds_cap = dev->src_rect;
+	dev->compose_cap = dev->crop_cap;
+	if (V4L2_FIELD_HAS_T_OR_B(dev->field_cap))
+		dev->compose_cap.height /= 2;
+	dev->fmt_cap_rect = dev->compose_cap;
+	tpg_s_video_aspect(&dev->tpg, vivid_get_video_aspect(dev));
+	tpg_s_pixel_aspect(&dev->tpg, vivid_get_pixel_aspect(dev));
+	tpg_update_mv_step(&dev->tpg);
+}
+
+/* Map the field to something that is valid for the current input */
+static enum v4l2_field vivid_field_cap(struct vivid_dev *dev, enum v4l2_field field)
+{
+	if (vivid_is_sdtv_cap(dev)) {
+		switch (field) {
+		case V4L2_FIELD_INTERLACED_TB:
+		case V4L2_FIELD_INTERLACED_BT:
+		case V4L2_FIELD_SEQ_TB:
+		case V4L2_FIELD_SEQ_BT:
+		case V4L2_FIELD_TOP:
+		case V4L2_FIELD_BOTTOM:
+		case V4L2_FIELD_ALTERNATE:
+			return field;
+		case V4L2_FIELD_INTERLACED:
+		default:
+			return V4L2_FIELD_INTERLACED;
+		}
+	}
+	if (vivid_is_hdmi_cap(dev))
+		return dev->dv_timings_cap[dev->input].bt.interlaced ?
+			V4L2_FIELD_ALTERNATE : V4L2_FIELD_NONE;
+	return V4L2_FIELD_NONE;
+}
+
+static unsigned vivid_colorspace_cap(struct vivid_dev *dev)
+{
+	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
+		return tpg_g_colorspace(&dev->tpg);
+	return dev->colorspace_out;
+}
+
+static unsigned vivid_xfer_func_cap(struct vivid_dev *dev)
+{
+	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
+		return tpg_g_xfer_func(&dev->tpg);
+	return dev->xfer_func_out;
+}
+
+static unsigned vivid_ycbcr_enc_cap(struct vivid_dev *dev)
+{
+	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
+		return tpg_g_ycbcr_enc(&dev->tpg);
+	return dev->ycbcr_enc_out;
+}
+
+static unsigned int vivid_hsv_enc_cap(struct vivid_dev *dev)
+{
+	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
+		return tpg_g_hsv_enc(&dev->tpg);
+	return dev->hsv_enc_out;
+}
+
+static unsigned vivid_quantization_cap(struct vivid_dev *dev)
+{
+	if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev))
+		return tpg_g_quantization(&dev->tpg);
+	return dev->quantization_out;
+}
+
+int vivid_g_fmt_vid_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
+	unsigned p;
+
+	mp->width        = dev->fmt_cap_rect.width;
+	mp->height       = dev->fmt_cap_rect.height;
+	mp->field        = dev->field_cap;
+	mp->pixelformat  = dev->fmt_cap->fourcc;
+	mp->colorspace   = vivid_colorspace_cap(dev);
+	mp->xfer_func    = vivid_xfer_func_cap(dev);
+	if (dev->fmt_cap->color_enc == TGP_COLOR_ENC_HSV)
+		mp->hsv_enc    = vivid_hsv_enc_cap(dev);
+	else
+		mp->ycbcr_enc    = vivid_ycbcr_enc_cap(dev);
+	mp->quantization = vivid_quantization_cap(dev);
+	mp->num_planes = dev->fmt_cap->buffers;
+	for (p = 0; p < mp->num_planes; p++) {
+		mp->plane_fmt[p].bytesperline = tpg_g_bytesperline(&dev->tpg, p);
+		mp->plane_fmt[p].sizeimage =
+			(tpg_g_line_width(&dev->tpg, p) * mp->height) /
+			dev->fmt_cap->vdownsampling[p] +
+			dev->fmt_cap->data_offset[p];
+	}
+	return 0;
+}
+
+int vivid_try_fmt_vid_cap(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
+	struct v4l2_plane_pix_format *pfmt = mp->plane_fmt;
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct vivid_fmt *fmt;
+	unsigned bytesperline, max_bpl;
+	unsigned factor = 1;
+	unsigned w, h;
+	unsigned p;
+
+	fmt = vivid_get_format(dev, mp->pixelformat);
+	if (!fmt) {
+		dprintk(dev, 1, "Fourcc format (0x%08x) unknown.\n",
+			mp->pixelformat);
+		mp->pixelformat = V4L2_PIX_FMT_YUYV;
+		fmt = vivid_get_format(dev, mp->pixelformat);
+	}
+
+	mp->field = vivid_field_cap(dev, mp->field);
+	if (vivid_is_webcam(dev)) {
+		const struct v4l2_frmsize_discrete *sz =
+			v4l2_find_nearest_size(webcam_sizes,
+					       VIVID_WEBCAM_SIZES, width,
+					       height, mp->width, mp->height);
+
+		w = sz->width;
+		h = sz->height;
+	} else if (vivid_is_sdtv_cap(dev)) {
+		w = 720;
+		h = (dev->std_cap[dev->input] & V4L2_STD_525_60) ? 480 : 576;
+	} else {
+		w = dev->src_rect.width;
+		h = dev->src_rect.height;
+	}
+	if (V4L2_FIELD_HAS_T_OR_B(mp->field))
+		factor = 2;
+	if (vivid_is_webcam(dev) ||
+	    (!dev->has_scaler_cap && !dev->has_crop_cap && !dev->has_compose_cap)) {
+		mp->width = w;
+		mp->height = h / factor;
+	} else {
+		struct v4l2_rect r = { 0, 0, mp->width, mp->height * factor };
+
+		v4l2_rect_set_min_size(&r, &vivid_min_rect);
+		v4l2_rect_set_max_size(&r, &vivid_max_rect);
+		if (dev->has_scaler_cap && !dev->has_compose_cap) {
+			struct v4l2_rect max_r = { 0, 0, MAX_ZOOM * w, MAX_ZOOM * h };
+
+			v4l2_rect_set_max_size(&r, &max_r);
+		} else if (!dev->has_scaler_cap && dev->has_crop_cap && !dev->has_compose_cap) {
+			v4l2_rect_set_max_size(&r, &dev->src_rect);
+		} else if (!dev->has_scaler_cap && !dev->has_crop_cap) {
+			v4l2_rect_set_min_size(&r, &dev->src_rect);
+		}
+		mp->width = r.width;
+		mp->height = r.height / factor;
+	}
+
+	/* This driver supports custom bytesperline values */
+
+	mp->num_planes = fmt->buffers;
+	for (p = 0; p < fmt->buffers; p++) {
+		/* Calculate the minimum supported bytesperline value */
+		bytesperline = (mp->width * fmt->bit_depth[p]) >> 3;
+		/* Calculate the maximum supported bytesperline value */
+		max_bpl = (MAX_ZOOM * MAX_WIDTH * fmt->bit_depth[p]) >> 3;
+
+		if (pfmt[p].bytesperline > max_bpl)
+			pfmt[p].bytesperline = max_bpl;
+		if (pfmt[p].bytesperline < bytesperline)
+			pfmt[p].bytesperline = bytesperline;
+
+		pfmt[p].sizeimage = (pfmt[p].bytesperline * mp->height) /
+				fmt->vdownsampling[p] + fmt->data_offset[p];
+
+		memset(pfmt[p].reserved, 0, sizeof(pfmt[p].reserved));
+	}
+	for (p = fmt->buffers; p < fmt->planes; p++)
+		pfmt[0].sizeimage += (pfmt[0].bytesperline * mp->height *
+			(fmt->bit_depth[p] / fmt->vdownsampling[p])) /
+			(fmt->bit_depth[0] / fmt->vdownsampling[0]);
+
+	mp->colorspace = vivid_colorspace_cap(dev);
+	if (fmt->color_enc == TGP_COLOR_ENC_HSV)
+		mp->hsv_enc = vivid_hsv_enc_cap(dev);
+	else
+		mp->ycbcr_enc = vivid_ycbcr_enc_cap(dev);
+	mp->xfer_func = vivid_xfer_func_cap(dev);
+	mp->quantization = vivid_quantization_cap(dev);
+	memset(mp->reserved, 0, sizeof(mp->reserved));
+	return 0;
+}
+
+int vivid_s_fmt_vid_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_rect *crop = &dev->crop_cap;
+	struct v4l2_rect *compose = &dev->compose_cap;
+	struct vb2_queue *q = &dev->vb_vid_cap_q;
+	int ret = vivid_try_fmt_vid_cap(file, priv, f);
+	unsigned factor = 1;
+	unsigned p;
+	unsigned i;
+
+	if (ret < 0)
+		return ret;
+
+	if (vb2_is_busy(q)) {
+		dprintk(dev, 1, "%s device busy\n", __func__);
+		return -EBUSY;
+	}
+
+	if (dev->overlay_cap_owner && dev->fb_cap.fmt.pixelformat != mp->pixelformat) {
+		dprintk(dev, 1, "overlay is active, can't change pixelformat\n");
+		return -EBUSY;
+	}
+
+	dev->fmt_cap = vivid_get_format(dev, mp->pixelformat);
+	if (V4L2_FIELD_HAS_T_OR_B(mp->field))
+		factor = 2;
+
+	/* Note: the webcam input doesn't support scaling, cropping or composing */
+
+	if (!vivid_is_webcam(dev) &&
+	    (dev->has_scaler_cap || dev->has_crop_cap || dev->has_compose_cap)) {
+		struct v4l2_rect r = { 0, 0, mp->width, mp->height };
+
+		if (dev->has_scaler_cap) {
+			if (dev->has_compose_cap)
+				v4l2_rect_map_inside(compose, &r);
+			else
+				*compose = r;
+			if (dev->has_crop_cap && !dev->has_compose_cap) {
+				struct v4l2_rect min_r = {
+					0, 0,
+					r.width / MAX_ZOOM,
+					factor * r.height / MAX_ZOOM
+				};
+				struct v4l2_rect max_r = {
+					0, 0,
+					r.width * MAX_ZOOM,
+					factor * r.height * MAX_ZOOM
+				};
+
+				v4l2_rect_set_min_size(crop, &min_r);
+				v4l2_rect_set_max_size(crop, &max_r);
+				v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
+			} else if (dev->has_crop_cap) {
+				struct v4l2_rect min_r = {
+					0, 0,
+					compose->width / MAX_ZOOM,
+					factor * compose->height / MAX_ZOOM
+				};
+				struct v4l2_rect max_r = {
+					0, 0,
+					compose->width * MAX_ZOOM,
+					factor * compose->height * MAX_ZOOM
+				};
+
+				v4l2_rect_set_min_size(crop, &min_r);
+				v4l2_rect_set_max_size(crop, &max_r);
+				v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
+			}
+		} else if (dev->has_crop_cap && !dev->has_compose_cap) {
+			r.height *= factor;
+			v4l2_rect_set_size_to(crop, &r);
+			v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
+			r = *crop;
+			r.height /= factor;
+			v4l2_rect_set_size_to(compose, &r);
+		} else if (!dev->has_crop_cap) {
+			v4l2_rect_map_inside(compose, &r);
+		} else {
+			r.height *= factor;
+			v4l2_rect_set_max_size(crop, &r);
+			v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
+			compose->top *= factor;
+			compose->height *= factor;
+			v4l2_rect_set_size_to(compose, crop);
+			v4l2_rect_map_inside(compose, &r);
+			compose->top /= factor;
+			compose->height /= factor;
+		}
+	} else if (vivid_is_webcam(dev)) {
+		/* Guaranteed to be a match */
+		for (i = 0; i < ARRAY_SIZE(webcam_sizes); i++)
+			if (webcam_sizes[i].width == mp->width &&
+					webcam_sizes[i].height == mp->height)
+				break;
+		dev->webcam_size_idx = i;
+		if (dev->webcam_ival_idx >= 2 * (VIVID_WEBCAM_SIZES - i))
+			dev->webcam_ival_idx = 2 * (VIVID_WEBCAM_SIZES - i) - 1;
+		vivid_update_format_cap(dev, false);
+	} else {
+		struct v4l2_rect r = { 0, 0, mp->width, mp->height };
+
+		v4l2_rect_set_size_to(compose, &r);
+		r.height *= factor;
+		v4l2_rect_set_size_to(crop, &r);
+	}
+
+	dev->fmt_cap_rect.width = mp->width;
+	dev->fmt_cap_rect.height = mp->height;
+	tpg_s_buf_height(&dev->tpg, mp->height);
+	tpg_s_fourcc(&dev->tpg, dev->fmt_cap->fourcc);
+	for (p = 0; p < tpg_g_buffers(&dev->tpg); p++)
+		tpg_s_bytesperline(&dev->tpg, p, mp->plane_fmt[p].bytesperline);
+	dev->field_cap = mp->field;
+	if (dev->field_cap == V4L2_FIELD_ALTERNATE)
+		tpg_s_field(&dev->tpg, V4L2_FIELD_TOP, true);
+	else
+		tpg_s_field(&dev->tpg, dev->field_cap, false);
+	tpg_s_crop_compose(&dev->tpg, &dev->crop_cap, &dev->compose_cap);
+	if (vivid_is_sdtv_cap(dev))
+		dev->tv_field_cap = mp->field;
+	tpg_update_mv_step(&dev->tpg);
+	return 0;
+}
+
+int vidioc_g_fmt_vid_cap_mplane(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!dev->multiplanar)
+		return -ENOTTY;
+	return vivid_g_fmt_vid_cap(file, priv, f);
+}
+
+int vidioc_try_fmt_vid_cap_mplane(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!dev->multiplanar)
+		return -ENOTTY;
+	return vivid_try_fmt_vid_cap(file, priv, f);
+}
+
+int vidioc_s_fmt_vid_cap_mplane(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!dev->multiplanar)
+		return -ENOTTY;
+	return vivid_s_fmt_vid_cap(file, priv, f);
+}
+
+int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+	return fmt_sp2mp_func(file, priv, f, vivid_g_fmt_vid_cap);
+}
+
+int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+	return fmt_sp2mp_func(file, priv, f, vivid_try_fmt_vid_cap);
+}
+
+int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+	return fmt_sp2mp_func(file, priv, f, vivid_s_fmt_vid_cap);
+}
+
+int vivid_vid_cap_g_selection(struct file *file, void *priv,
+			      struct v4l2_selection *sel)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!dev->has_crop_cap && !dev->has_compose_cap)
+		return -ENOTTY;
+	if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (vivid_is_webcam(dev))
+		return -ENODATA;
+
+	sel->r.left = sel->r.top = 0;
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP:
+		if (!dev->has_crop_cap)
+			return -EINVAL;
+		sel->r = dev->crop_cap;
+		break;
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		if (!dev->has_crop_cap)
+			return -EINVAL;
+		sel->r = dev->src_rect;
+		break;
+	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+		if (!dev->has_compose_cap)
+			return -EINVAL;
+		sel->r = vivid_max_rect;
+		break;
+	case V4L2_SEL_TGT_COMPOSE:
+		if (!dev->has_compose_cap)
+			return -EINVAL;
+		sel->r = dev->compose_cap;
+		break;
+	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+		if (!dev->has_compose_cap)
+			return -EINVAL;
+		sel->r = dev->fmt_cap_rect;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int vivid_vid_cap_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_rect *crop = &dev->crop_cap;
+	struct v4l2_rect *compose = &dev->compose_cap;
+	unsigned factor = V4L2_FIELD_HAS_T_OR_B(dev->field_cap) ? 2 : 1;
+	int ret;
+
+	if (!dev->has_crop_cap && !dev->has_compose_cap)
+		return -ENOTTY;
+	if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (vivid_is_webcam(dev))
+		return -ENODATA;
+
+	switch (s->target) {
+	case V4L2_SEL_TGT_CROP:
+		if (!dev->has_crop_cap)
+			return -EINVAL;
+		ret = vivid_vid_adjust_sel(s->flags, &s->r);
+		if (ret)
+			return ret;
+		v4l2_rect_set_min_size(&s->r, &vivid_min_rect);
+		v4l2_rect_set_max_size(&s->r, &dev->src_rect);
+		v4l2_rect_map_inside(&s->r, &dev->crop_bounds_cap);
+		s->r.top /= factor;
+		s->r.height /= factor;
+		if (dev->has_scaler_cap) {
+			struct v4l2_rect fmt = dev->fmt_cap_rect;
+			struct v4l2_rect max_rect = {
+				0, 0,
+				s->r.width * MAX_ZOOM,
+				s->r.height * MAX_ZOOM
+			};
+			struct v4l2_rect min_rect = {
+				0, 0,
+				s->r.width / MAX_ZOOM,
+				s->r.height / MAX_ZOOM
+			};
+
+			v4l2_rect_set_min_size(&fmt, &min_rect);
+			if (!dev->has_compose_cap)
+				v4l2_rect_set_max_size(&fmt, &max_rect);
+			if (!v4l2_rect_same_size(&dev->fmt_cap_rect, &fmt) &&
+			    vb2_is_busy(&dev->vb_vid_cap_q))
+				return -EBUSY;
+			if (dev->has_compose_cap) {
+				v4l2_rect_set_min_size(compose, &min_rect);
+				v4l2_rect_set_max_size(compose, &max_rect);
+			}
+			dev->fmt_cap_rect = fmt;
+			tpg_s_buf_height(&dev->tpg, fmt.height);
+		} else if (dev->has_compose_cap) {
+			struct v4l2_rect fmt = dev->fmt_cap_rect;
+
+			v4l2_rect_set_min_size(&fmt, &s->r);
+			if (!v4l2_rect_same_size(&dev->fmt_cap_rect, &fmt) &&
+			    vb2_is_busy(&dev->vb_vid_cap_q))
+				return -EBUSY;
+			dev->fmt_cap_rect = fmt;
+			tpg_s_buf_height(&dev->tpg, fmt.height);
+			v4l2_rect_set_size_to(compose, &s->r);
+			v4l2_rect_map_inside(compose, &dev->fmt_cap_rect);
+		} else {
+			if (!v4l2_rect_same_size(&s->r, &dev->fmt_cap_rect) &&
+			    vb2_is_busy(&dev->vb_vid_cap_q))
+				return -EBUSY;
+			v4l2_rect_set_size_to(&dev->fmt_cap_rect, &s->r);
+			v4l2_rect_set_size_to(compose, &s->r);
+			v4l2_rect_map_inside(compose, &dev->fmt_cap_rect);
+			tpg_s_buf_height(&dev->tpg, dev->fmt_cap_rect.height);
+		}
+		s->r.top *= factor;
+		s->r.height *= factor;
+		*crop = s->r;
+		break;
+	case V4L2_SEL_TGT_COMPOSE:
+		if (!dev->has_compose_cap)
+			return -EINVAL;
+		ret = vivid_vid_adjust_sel(s->flags, &s->r);
+		if (ret)
+			return ret;
+		v4l2_rect_set_min_size(&s->r, &vivid_min_rect);
+		v4l2_rect_set_max_size(&s->r, &dev->fmt_cap_rect);
+		if (dev->has_scaler_cap) {
+			struct v4l2_rect max_rect = {
+				0, 0,
+				dev->src_rect.width * MAX_ZOOM,
+				(dev->src_rect.height / factor) * MAX_ZOOM
+			};
+
+			v4l2_rect_set_max_size(&s->r, &max_rect);
+			if (dev->has_crop_cap) {
+				struct v4l2_rect min_rect = {
+					0, 0,
+					s->r.width / MAX_ZOOM,
+					(s->r.height * factor) / MAX_ZOOM
+				};
+				struct v4l2_rect max_rect = {
+					0, 0,
+					s->r.width * MAX_ZOOM,
+					(s->r.height * factor) * MAX_ZOOM
+				};
+
+				v4l2_rect_set_min_size(crop, &min_rect);
+				v4l2_rect_set_max_size(crop, &max_rect);
+				v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
+			}
+		} else if (dev->has_crop_cap) {
+			s->r.top *= factor;
+			s->r.height *= factor;
+			v4l2_rect_set_max_size(&s->r, &dev->src_rect);
+			v4l2_rect_set_size_to(crop, &s->r);
+			v4l2_rect_map_inside(crop, &dev->crop_bounds_cap);
+			s->r.top /= factor;
+			s->r.height /= factor;
+		} else {
+			v4l2_rect_set_size_to(&s->r, &dev->src_rect);
+			s->r.height /= factor;
+		}
+		v4l2_rect_map_inside(&s->r, &dev->fmt_cap_rect);
+		if (dev->bitmap_cap && (compose->width != s->r.width ||
+					compose->height != s->r.height)) {
+			vfree(dev->bitmap_cap);
+			dev->bitmap_cap = NULL;
+		}
+		*compose = s->r;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	tpg_s_crop_compose(&dev->tpg, crop, compose);
+	return 0;
+}
+
+int vivid_vid_cap_g_pixelaspect(struct file *file, void *priv,
+				int type, struct v4l2_fract *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	switch (vivid_get_pixel_aspect(dev)) {
+	case TPG_PIXEL_ASPECT_NTSC:
+		f->numerator = 11;
+		f->denominator = 10;
+		break;
+	case TPG_PIXEL_ASPECT_PAL:
+		f->numerator = 54;
+		f->denominator = 59;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+int vidioc_enum_fmt_vid_overlay(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct vivid_fmt *fmt;
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+
+	if (f->index >= ARRAY_SIZE(formats_ovl))
+		return -EINVAL;
+
+	fmt = &formats_ovl[f->index];
+
+	f->pixelformat = fmt->fourcc;
+	return 0;
+}
+
+int vidioc_g_fmt_vid_overlay(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct v4l2_rect *compose = &dev->compose_cap;
+	struct v4l2_window *win = &f->fmt.win;
+	unsigned clipcount = win->clipcount;
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+
+	win->w.top = dev->overlay_cap_top;
+	win->w.left = dev->overlay_cap_left;
+	win->w.width = compose->width;
+	win->w.height = compose->height;
+	win->field = dev->overlay_cap_field;
+	win->clipcount = dev->clipcount_cap;
+	if (clipcount > dev->clipcount_cap)
+		clipcount = dev->clipcount_cap;
+	if (dev->bitmap_cap == NULL)
+		win->bitmap = NULL;
+	else if (win->bitmap) {
+		if (copy_to_user(win->bitmap, dev->bitmap_cap,
+		    ((compose->width + 7) / 8) * compose->height))
+			return -EFAULT;
+	}
+	if (clipcount && win->clips) {
+		if (copy_to_user(win->clips, dev->clips_cap,
+				 clipcount * sizeof(dev->clips_cap[0])))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+int vidioc_try_fmt_vid_overlay(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct v4l2_rect *compose = &dev->compose_cap;
+	struct v4l2_window *win = &f->fmt.win;
+	int i, j;
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+
+	win->w.left = clamp_t(int, win->w.left,
+			      -dev->fb_cap.fmt.width, dev->fb_cap.fmt.width);
+	win->w.top = clamp_t(int, win->w.top,
+			     -dev->fb_cap.fmt.height, dev->fb_cap.fmt.height);
+	win->w.width = compose->width;
+	win->w.height = compose->height;
+	if (win->field != V4L2_FIELD_BOTTOM && win->field != V4L2_FIELD_TOP)
+		win->field = V4L2_FIELD_ANY;
+	win->chromakey = 0;
+	win->global_alpha = 0;
+	if (win->clipcount && !win->clips)
+		win->clipcount = 0;
+	if (win->clipcount > MAX_CLIPS)
+		win->clipcount = MAX_CLIPS;
+	if (win->clipcount) {
+		if (copy_from_user(dev->try_clips_cap, win->clips,
+				   win->clipcount * sizeof(dev->clips_cap[0])))
+			return -EFAULT;
+		for (i = 0; i < win->clipcount; i++) {
+			struct v4l2_rect *r = &dev->try_clips_cap[i].c;
+
+			r->top = clamp_t(s32, r->top, 0, dev->fb_cap.fmt.height - 1);
+			r->height = clamp_t(s32, r->height, 1, dev->fb_cap.fmt.height - r->top);
+			r->left = clamp_t(u32, r->left, 0, dev->fb_cap.fmt.width - 1);
+			r->width = clamp_t(u32, r->width, 1, dev->fb_cap.fmt.width - r->left);
+		}
+		/*
+		 * Yeah, so sue me, it's an O(n^2) algorithm. But n is a small
+		 * number and it's typically a one-time deal.
+		 */
+		for (i = 0; i < win->clipcount - 1; i++) {
+			struct v4l2_rect *r1 = &dev->try_clips_cap[i].c;
+
+			for (j = i + 1; j < win->clipcount; j++) {
+				struct v4l2_rect *r2 = &dev->try_clips_cap[j].c;
+
+				if (v4l2_rect_overlap(r1, r2))
+					return -EINVAL;
+			}
+		}
+		if (copy_to_user(win->clips, dev->try_clips_cap,
+				 win->clipcount * sizeof(dev->clips_cap[0])))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+int vidioc_s_fmt_vid_overlay(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct v4l2_rect *compose = &dev->compose_cap;
+	struct v4l2_window *win = &f->fmt.win;
+	int ret = vidioc_try_fmt_vid_overlay(file, priv, f);
+	unsigned bitmap_size = ((compose->width + 7) / 8) * compose->height;
+	unsigned clips_size = win->clipcount * sizeof(dev->clips_cap[0]);
+	void *new_bitmap = NULL;
+
+	if (ret)
+		return ret;
+
+	if (win->bitmap) {
+		new_bitmap = vzalloc(bitmap_size);
+
+		if (new_bitmap == NULL)
+			return -ENOMEM;
+		if (copy_from_user(new_bitmap, win->bitmap, bitmap_size)) {
+			vfree(new_bitmap);
+			return -EFAULT;
+		}
+	}
+
+	dev->overlay_cap_top = win->w.top;
+	dev->overlay_cap_left = win->w.left;
+	dev->overlay_cap_field = win->field;
+	vfree(dev->bitmap_cap);
+	dev->bitmap_cap = new_bitmap;
+	dev->clipcount_cap = win->clipcount;
+	if (dev->clipcount_cap)
+		memcpy(dev->clips_cap, dev->try_clips_cap, clips_size);
+	return 0;
+}
+
+int vivid_vid_cap_overlay(struct file *file, void *fh, unsigned i)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+
+	if (i && dev->fb_vbase_cap == NULL)
+		return -EINVAL;
+
+	if (i && dev->fb_cap.fmt.pixelformat != dev->fmt_cap->fourcc) {
+		dprintk(dev, 1, "mismatch between overlay and video capture pixelformats\n");
+		return -EINVAL;
+	}
+
+	if (dev->overlay_cap_owner && dev->overlay_cap_owner != fh)
+		return -EBUSY;
+	dev->overlay_cap_owner = i ? fh : NULL;
+	return 0;
+}
+
+int vivid_vid_cap_g_fbuf(struct file *file, void *fh,
+				struct v4l2_framebuffer *a)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+
+	*a = dev->fb_cap;
+	a->capability = V4L2_FBUF_CAP_BITMAP_CLIPPING |
+			V4L2_FBUF_CAP_LIST_CLIPPING;
+	a->flags = V4L2_FBUF_FLAG_PRIMARY;
+	a->fmt.field = V4L2_FIELD_NONE;
+	a->fmt.colorspace = V4L2_COLORSPACE_SRGB;
+	a->fmt.priv = 0;
+	return 0;
+}
+
+int vivid_vid_cap_s_fbuf(struct file *file, void *fh,
+				const struct v4l2_framebuffer *a)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct vivid_fmt *fmt;
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+
+	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
+	if (dev->overlay_cap_owner)
+		return -EBUSY;
+
+	if (a->base == NULL) {
+		dev->fb_cap.base = NULL;
+		dev->fb_vbase_cap = NULL;
+		return 0;
+	}
+
+	if (a->fmt.width < 48 || a->fmt.height < 32)
+		return -EINVAL;
+	fmt = vivid_get_format(dev, a->fmt.pixelformat);
+	if (!fmt || !fmt->can_do_overlay)
+		return -EINVAL;
+	if (a->fmt.bytesperline < (a->fmt.width * fmt->bit_depth[0]) / 8)
+		return -EINVAL;
+	if (a->fmt.height * a->fmt.bytesperline < a->fmt.sizeimage)
+		return -EINVAL;
+
+	dev->fb_vbase_cap = phys_to_virt((unsigned long)a->base);
+	dev->fb_cap = *a;
+	dev->overlay_cap_left = clamp_t(int, dev->overlay_cap_left,
+				    -dev->fb_cap.fmt.width, dev->fb_cap.fmt.width);
+	dev->overlay_cap_top = clamp_t(int, dev->overlay_cap_top,
+				   -dev->fb_cap.fmt.height, dev->fb_cap.fmt.height);
+	return 0;
+}
+
+static const struct v4l2_audio vivid_audio_inputs[] = {
+	{ 0, "TV", V4L2_AUDCAP_STEREO },
+	{ 1, "Line-In", V4L2_AUDCAP_STEREO },
+};
+
+int vidioc_enum_input(struct file *file, void *priv,
+				struct v4l2_input *inp)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (inp->index >= dev->num_inputs)
+		return -EINVAL;
+
+	inp->type = V4L2_INPUT_TYPE_CAMERA;
+	switch (dev->input_type[inp->index]) {
+	case WEBCAM:
+		snprintf(inp->name, sizeof(inp->name), "Webcam %u",
+				dev->input_name_counter[inp->index]);
+		inp->capabilities = 0;
+		break;
+	case TV:
+		snprintf(inp->name, sizeof(inp->name), "TV %u",
+				dev->input_name_counter[inp->index]);
+		inp->type = V4L2_INPUT_TYPE_TUNER;
+		inp->std = V4L2_STD_ALL;
+		if (dev->has_audio_inputs)
+			inp->audioset = (1 << ARRAY_SIZE(vivid_audio_inputs)) - 1;
+		inp->capabilities = V4L2_IN_CAP_STD;
+		break;
+	case SVID:
+		snprintf(inp->name, sizeof(inp->name), "S-Video %u",
+				dev->input_name_counter[inp->index]);
+		inp->std = V4L2_STD_ALL;
+		if (dev->has_audio_inputs)
+			inp->audioset = (1 << ARRAY_SIZE(vivid_audio_inputs)) - 1;
+		inp->capabilities = V4L2_IN_CAP_STD;
+		break;
+	case HDMI:
+		snprintf(inp->name, sizeof(inp->name), "HDMI %u",
+				dev->input_name_counter[inp->index]);
+		inp->capabilities = V4L2_IN_CAP_DV_TIMINGS;
+		if (dev->edid_blocks == 0 ||
+		    dev->dv_timings_signal_mode[dev->input] == NO_SIGNAL)
+			inp->status |= V4L2_IN_ST_NO_SIGNAL;
+		else if (dev->dv_timings_signal_mode[dev->input] == NO_LOCK ||
+			 dev->dv_timings_signal_mode[dev->input] == OUT_OF_RANGE)
+			inp->status |= V4L2_IN_ST_NO_H_LOCK;
+		break;
+	}
+	if (dev->sensor_hflip)
+		inp->status |= V4L2_IN_ST_HFLIP;
+	if (dev->sensor_vflip)
+		inp->status |= V4L2_IN_ST_VFLIP;
+	if (dev->input == inp->index && vivid_is_sdtv_cap(dev)) {
+		if (dev->std_signal_mode[dev->input] == NO_SIGNAL) {
+			inp->status |= V4L2_IN_ST_NO_SIGNAL;
+		} else if (dev->std_signal_mode[dev->input] == NO_LOCK) {
+			inp->status |= V4L2_IN_ST_NO_H_LOCK;
+		} else if (vivid_is_tv_cap(dev)) {
+			switch (tpg_g_quality(&dev->tpg)) {
+			case TPG_QUAL_GRAY:
+				inp->status |= V4L2_IN_ST_COLOR_KILL;
+				break;
+			case TPG_QUAL_NOISE:
+				inp->status |= V4L2_IN_ST_NO_H_LOCK;
+				break;
+			default:
+				break;
+			}
+		}
+	}
+	return 0;
+}
+
+int vidioc_g_input(struct file *file, void *priv, unsigned *i)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	*i = dev->input;
+	return 0;
+}
+
+int vidioc_s_input(struct file *file, void *priv, unsigned i)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_bt_timings *bt = &dev->dv_timings_cap[dev->input].bt;
+	unsigned brightness;
+
+	if (i >= dev->num_inputs)
+		return -EINVAL;
+
+	if (i == dev->input)
+		return 0;
+
+	if (vb2_is_busy(&dev->vb_vid_cap_q) ||
+	    vb2_is_busy(&dev->vb_vbi_cap_q) ||
+	    vb2_is_busy(&dev->vb_meta_cap_q))
+		return -EBUSY;
+
+	dev->input = i;
+	dev->vid_cap_dev.tvnorms = 0;
+	if (dev->input_type[i] == TV || dev->input_type[i] == SVID) {
+		dev->tv_audio_input = (dev->input_type[i] == TV) ? 0 : 1;
+		dev->vid_cap_dev.tvnorms = V4L2_STD_ALL;
+	}
+	dev->vbi_cap_dev.tvnorms = dev->vid_cap_dev.tvnorms;
+	dev->meta_cap_dev.tvnorms = dev->vid_cap_dev.tvnorms;
+	vivid_update_format_cap(dev, false);
+
+	if (dev->colorspace) {
+		switch (dev->input_type[i]) {
+		case WEBCAM:
+			v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_SRGB);
+			break;
+		case TV:
+		case SVID:
+			v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_170M);
+			break;
+		case HDMI:
+			if (bt->flags & V4L2_DV_FL_IS_CE_VIDEO) {
+				if (dev->src_rect.width == 720 && dev->src_rect.height <= 576)
+					v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_170M);
+				else
+					v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_709);
+			} else {
+				v4l2_ctrl_s_ctrl(dev->colorspace, VIVID_CS_SRGB);
+			}
+			break;
+		}
+	}
+
+	/*
+	 * Modify the brightness range depending on the input.
+	 * This makes it easy to use vivid to test if applications can
+	 * handle control range modifications and is also how this is
+	 * typically used in practice as different inputs may be hooked
+	 * up to different receivers with different control ranges.
+	 */
+	brightness = 128 * i + dev->input_brightness[i];
+	v4l2_ctrl_modify_range(dev->brightness,
+			128 * i, 255 + 128 * i, 1, 128 + 128 * i);
+	v4l2_ctrl_s_ctrl(dev->brightness, brightness);
+
+	/* Restore per-input states. */
+	v4l2_ctrl_activate(dev->ctrl_dv_timings_signal_mode,
+			   vivid_is_hdmi_cap(dev));
+	v4l2_ctrl_activate(dev->ctrl_dv_timings, vivid_is_hdmi_cap(dev) &&
+			   dev->dv_timings_signal_mode[dev->input] ==
+			   SELECTED_DV_TIMINGS);
+	v4l2_ctrl_activate(dev->ctrl_std_signal_mode, vivid_is_sdtv_cap(dev));
+	v4l2_ctrl_activate(dev->ctrl_standard, vivid_is_sdtv_cap(dev) &&
+			   dev->std_signal_mode[dev->input]);
+
+	if (vivid_is_hdmi_cap(dev)) {
+		v4l2_ctrl_s_ctrl(dev->ctrl_dv_timings_signal_mode,
+				 dev->dv_timings_signal_mode[dev->input]);
+		v4l2_ctrl_s_ctrl(dev->ctrl_dv_timings,
+				 dev->query_dv_timings[dev->input]);
+	} else if (vivid_is_sdtv_cap(dev)) {
+		v4l2_ctrl_s_ctrl(dev->ctrl_std_signal_mode,
+				 dev->std_signal_mode[dev->input]);
+		v4l2_ctrl_s_ctrl(dev->ctrl_standard,
+				 dev->std_signal_mode[dev->input]);
+	}
+
+	return 0;
+}
+
+int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *vin)
+{
+	if (vin->index >= ARRAY_SIZE(vivid_audio_inputs))
+		return -EINVAL;
+	*vin = vivid_audio_inputs[vin->index];
+	return 0;
+}
+
+int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *vin)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_sdtv_cap(dev))
+		return -EINVAL;
+	*vin = vivid_audio_inputs[dev->tv_audio_input];
+	return 0;
+}
+
+int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *vin)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_sdtv_cap(dev))
+		return -EINVAL;
+	if (vin->index >= ARRAY_SIZE(vivid_audio_inputs))
+		return -EINVAL;
+	dev->tv_audio_input = vin->index;
+	return 0;
+}
+
+int vivid_video_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (vf->tuner != 0)
+		return -EINVAL;
+	vf->frequency = dev->tv_freq;
+	return 0;
+}
+
+int vivid_video_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (vf->tuner != 0)
+		return -EINVAL;
+	dev->tv_freq = clamp_t(unsigned, vf->frequency, MIN_TV_FREQ, MAX_TV_FREQ);
+	if (vivid_is_tv_cap(dev))
+		vivid_update_quality(dev);
+	return 0;
+}
+
+int vivid_video_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (vt->index != 0)
+		return -EINVAL;
+	if (vt->audmode > V4L2_TUNER_MODE_LANG1_LANG2)
+		return -EINVAL;
+	dev->tv_audmode = vt->audmode;
+	return 0;
+}
+
+int vivid_video_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	enum tpg_quality qual;
+
+	if (vt->index != 0)
+		return -EINVAL;
+
+	vt->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO |
+			 V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
+	vt->audmode = dev->tv_audmode;
+	vt->rangelow = MIN_TV_FREQ;
+	vt->rangehigh = MAX_TV_FREQ;
+	qual = vivid_get_quality(dev, &vt->afc);
+	if (qual == TPG_QUAL_COLOR)
+		vt->signal = 0xffff;
+	else if (qual == TPG_QUAL_GRAY)
+		vt->signal = 0x8000;
+	else
+		vt->signal = 0;
+	if (qual == TPG_QUAL_NOISE) {
+		vt->rxsubchans = 0;
+	} else if (qual == TPG_QUAL_GRAY) {
+		vt->rxsubchans = V4L2_TUNER_SUB_MONO;
+	} else {
+		unsigned int channel_nr = dev->tv_freq / (6 * 16);
+		unsigned int options =
+			(dev->std_cap[dev->input] & V4L2_STD_NTSC_M) ? 4 : 3;
+
+		switch (channel_nr % options) {
+		case 0:
+			vt->rxsubchans = V4L2_TUNER_SUB_MONO;
+			break;
+		case 1:
+			vt->rxsubchans = V4L2_TUNER_SUB_STEREO;
+			break;
+		case 2:
+			if (dev->std_cap[dev->input] & V4L2_STD_NTSC_M)
+				vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_SAP;
+			else
+				vt->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
+			break;
+		case 3:
+			vt->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_SAP;
+			break;
+		}
+	}
+	strscpy(vt->name, "TV Tuner", sizeof(vt->name));
+	return 0;
+}
+
+/* Must remain in sync with the vivid_ctrl_standard_strings array */
+const v4l2_std_id vivid_standard[] = {
+	V4L2_STD_NTSC_M,
+	V4L2_STD_NTSC_M_JP,
+	V4L2_STD_NTSC_M_KR,
+	V4L2_STD_NTSC_443,
+	V4L2_STD_PAL_BG | V4L2_STD_PAL_H,
+	V4L2_STD_PAL_I,
+	V4L2_STD_PAL_DK,
+	V4L2_STD_PAL_M,
+	V4L2_STD_PAL_N,
+	V4L2_STD_PAL_Nc,
+	V4L2_STD_PAL_60,
+	V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H,
+	V4L2_STD_SECAM_DK,
+	V4L2_STD_SECAM_L,
+	V4L2_STD_SECAM_LC,
+	V4L2_STD_UNKNOWN
+};
+
+/* Must remain in sync with the vivid_standard array */
+const char * const vivid_ctrl_standard_strings[] = {
+	"NTSC-M",
+	"NTSC-M-JP",
+	"NTSC-M-KR",
+	"NTSC-443",
+	"PAL-BGH",
+	"PAL-I",
+	"PAL-DK",
+	"PAL-M",
+	"PAL-N",
+	"PAL-Nc",
+	"PAL-60",
+	"SECAM-BGH",
+	"SECAM-DK",
+	"SECAM-L",
+	"SECAM-Lc",
+	NULL,
+};
+
+int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	unsigned int last = dev->query_std_last[dev->input];
+
+	if (!vivid_is_sdtv_cap(dev))
+		return -ENODATA;
+	if (dev->std_signal_mode[dev->input] == NO_SIGNAL ||
+	    dev->std_signal_mode[dev->input] == NO_LOCK) {
+		*id = V4L2_STD_UNKNOWN;
+		return 0;
+	}
+	if (vivid_is_tv_cap(dev) && tpg_g_quality(&dev->tpg) == TPG_QUAL_NOISE) {
+		*id = V4L2_STD_UNKNOWN;
+	} else if (dev->std_signal_mode[dev->input] == CURRENT_STD) {
+		*id = dev->std_cap[dev->input];
+	} else if (dev->std_signal_mode[dev->input] == SELECTED_STD) {
+		*id = dev->query_std[dev->input];
+	} else {
+		*id = vivid_standard[last];
+		dev->query_std_last[dev->input] =
+			(last + 1) % ARRAY_SIZE(vivid_standard);
+	}
+
+	return 0;
+}
+
+int vivid_vid_cap_s_std(struct file *file, void *priv, v4l2_std_id id)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_sdtv_cap(dev))
+		return -ENODATA;
+	if (dev->std_cap[dev->input] == id)
+		return 0;
+	if (vb2_is_busy(&dev->vb_vid_cap_q) || vb2_is_busy(&dev->vb_vbi_cap_q))
+		return -EBUSY;
+	dev->std_cap[dev->input] = id;
+	vivid_update_format_cap(dev, false);
+	return 0;
+}
+
+static void find_aspect_ratio(u32 width, u32 height,
+			       u32 *num, u32 *denom)
+{
+	if (!(height % 3) && ((height * 4 / 3) == width)) {
+		*num = 4;
+		*denom = 3;
+	} else if (!(height % 9) && ((height * 16 / 9) == width)) {
+		*num = 16;
+		*denom = 9;
+	} else if (!(height % 10) && ((height * 16 / 10) == width)) {
+		*num = 16;
+		*denom = 10;
+	} else if (!(height % 4) && ((height * 5 / 4) == width)) {
+		*num = 5;
+		*denom = 4;
+	} else if (!(height % 9) && ((height * 15 / 9) == width)) {
+		*num = 15;
+		*denom = 9;
+	} else { /* default to 16:9 */
+		*num = 16;
+		*denom = 9;
+	}
+}
+
+static bool valid_cvt_gtf_timings(struct v4l2_dv_timings *timings)
+{
+	struct v4l2_bt_timings *bt = &timings->bt;
+	u32 total_h_pixel;
+	u32 total_v_lines;
+	u32 h_freq;
+
+	if (!v4l2_valid_dv_timings(timings, &vivid_dv_timings_cap,
+				NULL, NULL))
+		return false;
+
+	total_h_pixel = V4L2_DV_BT_FRAME_WIDTH(bt);
+	total_v_lines = V4L2_DV_BT_FRAME_HEIGHT(bt);
+
+	h_freq = (u32)bt->pixelclock / total_h_pixel;
+
+	if (bt->standards == 0 || (bt->standards & V4L2_DV_BT_STD_CVT)) {
+		if (v4l2_detect_cvt(total_v_lines, h_freq, bt->vsync, bt->width,
+				    bt->polarities, bt->interlaced, timings))
+			return true;
+	}
+
+	if (bt->standards == 0 || (bt->standards & V4L2_DV_BT_STD_GTF)) {
+		struct v4l2_fract aspect_ratio;
+
+		find_aspect_ratio(bt->width, bt->height,
+				  &aspect_ratio.numerator,
+				  &aspect_ratio.denominator);
+		if (v4l2_detect_gtf(total_v_lines, h_freq, bt->vsync,
+				    bt->polarities, bt->interlaced,
+				    aspect_ratio, timings))
+			return true;
+	}
+	return false;
+}
+
+int vivid_vid_cap_s_dv_timings(struct file *file, void *_fh,
+				    struct v4l2_dv_timings *timings)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_hdmi_cap(dev))
+		return -ENODATA;
+	if (!v4l2_find_dv_timings_cap(timings, &vivid_dv_timings_cap,
+				      0, NULL, NULL) &&
+	    !valid_cvt_gtf_timings(timings))
+		return -EINVAL;
+
+	if (v4l2_match_dv_timings(timings, &dev->dv_timings_cap[dev->input],
+				  0, false))
+		return 0;
+	if (vb2_is_busy(&dev->vb_vid_cap_q))
+		return -EBUSY;
+
+	dev->dv_timings_cap[dev->input] = *timings;
+	vivid_update_format_cap(dev, false);
+	return 0;
+}
+
+int vidioc_query_dv_timings(struct file *file, void *_fh,
+				    struct v4l2_dv_timings *timings)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	unsigned int input = dev->input;
+	unsigned int last = dev->query_dv_timings_last[input];
+
+	if (!vivid_is_hdmi_cap(dev))
+		return -ENODATA;
+	if (dev->dv_timings_signal_mode[input] == NO_SIGNAL ||
+	    dev->edid_blocks == 0)
+		return -ENOLINK;
+	if (dev->dv_timings_signal_mode[input] == NO_LOCK)
+		return -ENOLCK;
+	if (dev->dv_timings_signal_mode[input] == OUT_OF_RANGE) {
+		timings->bt.pixelclock = vivid_dv_timings_cap.bt.max_pixelclock * 2;
+		return -ERANGE;
+	}
+	if (dev->dv_timings_signal_mode[input] == CURRENT_DV_TIMINGS) {
+		*timings = dev->dv_timings_cap[input];
+	} else if (dev->dv_timings_signal_mode[input] ==
+		   SELECTED_DV_TIMINGS) {
+		*timings =
+			v4l2_dv_timings_presets[dev->query_dv_timings[input]];
+	} else {
+		*timings =
+			v4l2_dv_timings_presets[last];
+		dev->query_dv_timings_last[input] =
+			(last + 1) % dev->query_dv_timings_size;
+	}
+	return 0;
+}
+
+int vidioc_s_edid(struct file *file, void *_fh,
+			 struct v4l2_edid *edid)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	u16 phys_addr;
+	u32 display_present = 0;
+	unsigned int i, j;
+	int ret;
+
+	memset(edid->reserved, 0, sizeof(edid->reserved));
+	if (edid->pad >= dev->num_inputs)
+		return -EINVAL;
+	if (dev->input_type[edid->pad] != HDMI || edid->start_block)
+		return -EINVAL;
+	if (edid->blocks == 0) {
+		dev->edid_blocks = 0;
+		v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, 0);
+		v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, 0);
+		phys_addr = CEC_PHYS_ADDR_INVALID;
+		goto set_phys_addr;
+	}
+	if (edid->blocks > dev->edid_max_blocks) {
+		edid->blocks = dev->edid_max_blocks;
+		return -E2BIG;
+	}
+	phys_addr = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL);
+	ret = v4l2_phys_addr_validate(phys_addr, &phys_addr, NULL);
+	if (ret)
+		return ret;
+
+	if (vb2_is_busy(&dev->vb_vid_cap_q))
+		return -EBUSY;
+
+	dev->edid_blocks = edid->blocks;
+	memcpy(dev->edid, edid->edid, edid->blocks * 128);
+
+	for (i = 0, j = 0; i < dev->num_outputs; i++)
+		if (dev->output_type[i] == HDMI)
+			display_present |=
+				dev->display_present[i] << j++;
+
+	v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, display_present);
+	v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, display_present);
+
+set_phys_addr:
+	/* TODO: a proper hotplug detect cycle should be emulated here */
+	cec_s_phys_addr(dev->cec_rx_adap, phys_addr, false);
+
+	for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++)
+		cec_s_phys_addr(dev->cec_tx_adap[i],
+				dev->display_present[i] ?
+				v4l2_phys_addr_for_input(phys_addr, i + 1) :
+				CEC_PHYS_ADDR_INVALID,
+				false);
+	return 0;
+}
+
+int vidioc_enum_framesizes(struct file *file, void *fh,
+					 struct v4l2_frmsizeenum *fsize)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_webcam(dev) && !dev->has_scaler_cap)
+		return -EINVAL;
+	if (vivid_get_format(dev, fsize->pixel_format) == NULL)
+		return -EINVAL;
+	if (vivid_is_webcam(dev)) {
+		if (fsize->index >= ARRAY_SIZE(webcam_sizes))
+			return -EINVAL;
+		fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+		fsize->discrete = webcam_sizes[fsize->index];
+		return 0;
+	}
+	if (fsize->index)
+		return -EINVAL;
+	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
+	fsize->stepwise.min_width = MIN_WIDTH;
+	fsize->stepwise.max_width = MAX_WIDTH * MAX_ZOOM;
+	fsize->stepwise.step_width = 2;
+	fsize->stepwise.min_height = MIN_HEIGHT;
+	fsize->stepwise.max_height = MAX_HEIGHT * MAX_ZOOM;
+	fsize->stepwise.step_height = 2;
+	return 0;
+}
+
+/* timeperframe is arbitrary and continuous */
+int vidioc_enum_frameintervals(struct file *file, void *priv,
+					     struct v4l2_frmivalenum *fival)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct vivid_fmt *fmt;
+	int i;
+
+	fmt = vivid_get_format(dev, fival->pixel_format);
+	if (!fmt)
+		return -EINVAL;
+
+	if (!vivid_is_webcam(dev)) {
+		if (fival->index)
+			return -EINVAL;
+		if (fival->width < MIN_WIDTH || fival->width > MAX_WIDTH * MAX_ZOOM)
+			return -EINVAL;
+		if (fival->height < MIN_HEIGHT || fival->height > MAX_HEIGHT * MAX_ZOOM)
+			return -EINVAL;
+		fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+		fival->discrete = dev->timeperframe_vid_cap;
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(webcam_sizes); i++)
+		if (fival->width == webcam_sizes[i].width &&
+		    fival->height == webcam_sizes[i].height)
+			break;
+	if (i == ARRAY_SIZE(webcam_sizes))
+		return -EINVAL;
+	if (fival->index >= 2 * (VIVID_WEBCAM_SIZES - i))
+		return -EINVAL;
+	fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+	fival->discrete = webcam_intervals[fival->index];
+	return 0;
+}
+
+int vivid_vid_cap_g_parm(struct file *file, void *priv,
+			  struct v4l2_streamparm *parm)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (parm->type != (dev->multiplanar ?
+			   V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :
+			   V4L2_BUF_TYPE_VIDEO_CAPTURE))
+		return -EINVAL;
+
+	parm->parm.capture.capability   = V4L2_CAP_TIMEPERFRAME;
+	parm->parm.capture.timeperframe = dev->timeperframe_vid_cap;
+	parm->parm.capture.readbuffers  = 1;
+	return 0;
+}
+
+int vivid_vid_cap_s_parm(struct file *file, void *priv,
+			  struct v4l2_streamparm *parm)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	unsigned ival_sz = 2 * (VIVID_WEBCAM_SIZES - dev->webcam_size_idx);
+	struct v4l2_fract tpf;
+	unsigned i;
+
+	if (parm->type != (dev->multiplanar ?
+			   V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :
+			   V4L2_BUF_TYPE_VIDEO_CAPTURE))
+		return -EINVAL;
+	if (!vivid_is_webcam(dev))
+		return vivid_vid_cap_g_parm(file, priv, parm);
+
+	tpf = parm->parm.capture.timeperframe;
+
+	if (tpf.denominator == 0)
+		tpf = webcam_intervals[ival_sz - 1];
+	for (i = 0; i < ival_sz; i++)
+		if (V4L2_FRACT_COMPARE(tpf, >=, webcam_intervals[i]))
+			break;
+	if (i == ival_sz)
+		i = ival_sz - 1;
+	dev->webcam_ival_idx = i;
+	tpf = webcam_intervals[dev->webcam_ival_idx];
+
+	/* resync the thread's timings */
+	dev->cap_seq_resync = true;
+	dev->timeperframe_vid_cap = tpf;
+	parm->parm.capture.capability   = V4L2_CAP_TIMEPERFRAME;
+	parm->parm.capture.timeperframe = tpf;
+	parm->parm.capture.readbuffers  = 1;
+	return 0;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-vid-cap.h b/drivers/media/test-drivers/vivid/vivid-vid-cap.h
new file mode 100644
index 000000000000..1e422a59eeab
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vid-cap.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-vid-cap.h - video capture support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_VID_CAP_H_
+#define _VIVID_VID_CAP_H_
+
+void vivid_update_quality(struct vivid_dev *dev);
+void vivid_update_format_cap(struct vivid_dev *dev, bool keep_controls);
+enum tpg_video_aspect vivid_get_video_aspect(const struct vivid_dev *dev);
+
+extern const v4l2_std_id vivid_standard[];
+extern const char * const vivid_ctrl_standard_strings[];
+
+extern const struct vb2_ops vivid_vid_cap_qops;
+
+int vivid_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_g_fmt_vid_cap_mplane(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_try_fmt_vid_cap_mplane(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_s_fmt_vid_cap_mplane(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_vid_cap_g_selection(struct file *file, void *priv, struct v4l2_selection *sel);
+int vivid_vid_cap_s_selection(struct file *file, void *fh, struct v4l2_selection *s);
+int vivid_vid_cap_g_pixelaspect(struct file *file, void *priv, int type, struct v4l2_fract *f);
+int vidioc_enum_fmt_vid_overlay(struct file *file, void  *priv, struct v4l2_fmtdesc *f);
+int vidioc_g_fmt_vid_overlay(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_try_fmt_vid_overlay(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_s_fmt_vid_overlay(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_vid_cap_overlay(struct file *file, void *fh, unsigned i);
+int vivid_vid_cap_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *a);
+int vivid_vid_cap_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *a);
+int vidioc_enum_input(struct file *file, void *priv, struct v4l2_input *inp);
+int vidioc_g_input(struct file *file, void *priv, unsigned *i);
+int vidioc_s_input(struct file *file, void *priv, unsigned i);
+int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *vin);
+int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *vin);
+int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *vin);
+int vivid_video_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf);
+int vivid_video_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf);
+int vivid_video_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt);
+int vivid_video_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt);
+int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *id);
+int vivid_vid_cap_s_std(struct file *file, void *priv, v4l2_std_id id);
+int vivid_vid_cap_s_dv_timings(struct file *file, void *_fh, struct v4l2_dv_timings *timings);
+int vidioc_query_dv_timings(struct file *file, void *_fh, struct v4l2_dv_timings *timings);
+int vidioc_s_edid(struct file *file, void *_fh, struct v4l2_edid *edid);
+int vidioc_enum_framesizes(struct file *file, void *fh, struct v4l2_frmsizeenum *fsize);
+int vidioc_enum_frameintervals(struct file *file, void *priv, struct v4l2_frmivalenum *fival);
+int vivid_vid_cap_g_parm(struct file *file, void *priv, struct v4l2_streamparm *parm);
+int vivid_vid_cap_s_parm(struct file *file, void *priv, struct v4l2_streamparm *parm);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-vid-common.c b/drivers/media/test-drivers/vivid/vivid-vid-common.c
new file mode 100644
index 000000000000..76b0be670ebb
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vid-common.c
@@ -0,0 +1,1035 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-vid-common.c - common video support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-dv-timings.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-dv-timings.h>
+
+#include "vivid-core.h"
+#include "vivid-vid-common.h"
+
+const struct v4l2_dv_timings_cap vivid_dv_timings_cap = {
+	.type = V4L2_DV_BT_656_1120,
+	/* keep this initialization for compatibility with GCC < 4.4.6 */
+	.reserved = { 0 },
+	V4L2_INIT_BT_TIMINGS(16, MAX_WIDTH, 16, MAX_HEIGHT, 14000000, 775000000,
+		V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+		V4L2_DV_BT_STD_CVT | V4L2_DV_BT_STD_GTF,
+		V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_INTERLACED)
+};
+
+/* ------------------------------------------------------------------
+	Basic structures
+   ------------------------------------------------------------------*/
+
+struct vivid_fmt vivid_formats[] = {
+	{
+		.fourcc   = V4L2_PIX_FMT_YUYV,
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 1,
+		.buffers = 1,
+		.data_offset = { PLANE0_DATA_OFFSET },
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_UYVY,
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YVYU,
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_VYUY,
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YUV422P,
+		.vdownsampling = { 1, 1, 1 },
+		.bit_depth = { 8, 4, 4 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 3,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YUV420,
+		.vdownsampling = { 1, 2, 2 },
+		.bit_depth = { 8, 4, 4 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 3,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YVU420,
+		.vdownsampling = { 1, 2, 2 },
+		.bit_depth = { 8, 4, 4 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 3,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_NV12,
+		.vdownsampling = { 1, 2 },
+		.bit_depth = { 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_NV21,
+		.vdownsampling = { 1, 2 },
+		.bit_depth = { 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_NV16,
+		.vdownsampling = { 1, 1 },
+		.bit_depth = { 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_NV61,
+		.vdownsampling = { 1, 1 },
+		.bit_depth = { 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_NV24,
+		.vdownsampling = { 1, 1 },
+		.bit_depth = { 8, 16 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_NV42,
+		.vdownsampling = { 1, 1 },
+		.bit_depth = { 8, 16 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YUV555, /* uuuvvvvv ayyyyyuu */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x8000,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YUV565, /* uuuvvvvv yyyyyuuu */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YUV444, /* uuuuvvvv aaaayyyy */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0xf000,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YUV32, /* ayuv */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x000000ff,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_AYUV32,
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x000000ff,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_XYUV32,
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_VUYA32,
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0xff000000,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_VUYX32,
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_GREY,
+		.vdownsampling = { 1 },
+		.bit_depth = { 8 },
+		.color_enc = TGP_COLOR_ENC_LUMA,
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_Y10,
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.color_enc = TGP_COLOR_ENC_LUMA,
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_Y12,
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.color_enc = TGP_COLOR_ENC_LUMA,
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_Y16,
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.color_enc = TGP_COLOR_ENC_LUMA,
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_Y16_BE,
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.color_enc = TGP_COLOR_ENC_LUMA,
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGB332, /* rrrgggbb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 8 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGB444, /* ggggbbbb xxxxrrrr */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_XRGB444, /* ggggbbbb xxxxrrrr */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_ARGB444, /* ggggbbbb aaaarrrr */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x00f0,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGBX444, /* bbbbxxxx rrrrgggg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGBA444, /* bbbbaaaa rrrrgggg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x00f0,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_XBGR444, /* ggggrrrr xxxxbbbb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_ABGR444, /* ggggrrrr aaaabbbb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x00f0,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_BGRX444, /* rrrrxxxx bbbbgggg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_BGRA444, /* rrrraaaa bbbbgggg  */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x00f0,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGB555, /* gggbbbbb xrrrrrgg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_XRGB555, /* gggbbbbb xrrrrrgg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_ARGB555, /* gggbbbbb arrrrrgg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+		.alpha_mask = 0x8000,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGBX555, /* ggbbbbbx rrrrrggg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGBA555, /* ggbbbbba rrrrrggg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+		.alpha_mask = 0x8000,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_XBGR555, /* gggrrrrr xbbbbbgg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_ABGR555, /* gggrrrrr abbbbbgg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+		.alpha_mask = 0x8000,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_BGRX555, /* ggrrrrrx bbbbbggg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_BGRA555, /* ggrrrrra bbbbbggg */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.can_do_overlay = true,
+		.alpha_mask = 0x8000,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGB555X, /* xrrrrrgg gggbbbbb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_XRGB555X, /* xrrrrrgg gggbbbbb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_ARGB555X, /* arrrrrgg gggbbbbb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x0080,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGB24, /* rgb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 24 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_BGR24, /* bgr */
+		.vdownsampling = { 1 },
+		.bit_depth = { 24 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_BGR666, /* bbbbbbgg ggggrrrr rrxxxxxx */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGB32, /* xrgb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_BGR32, /* bgrx */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_XRGB32, /* xrgb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_XBGR32, /* bgrx */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_ARGB32, /* argb */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x000000ff,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_ABGR32, /* bgra */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0xff000000,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGBX32, /* rgbx */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_BGRX32, /* xbgr */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_RGBA32, /* rgba */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0x000000ff,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_BGRA32, /* abgr */
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+		.alpha_mask = 0xff000000,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SBGGR8, /* Bayer BG/GR */
+		.vdownsampling = { 1 },
+		.bit_depth = { 8 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SGBRG8, /* Bayer GB/RG */
+		.vdownsampling = { 1 },
+		.bit_depth = { 8 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SGRBG8, /* Bayer GR/BG */
+		.vdownsampling = { 1 },
+		.bit_depth = { 8 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SRGGB8, /* Bayer RG/GB */
+		.vdownsampling = { 1 },
+		.bit_depth = { 8 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SBGGR10, /* Bayer BG/GR */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SGBRG10, /* Bayer GB/RG */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SGRBG10, /* Bayer GR/BG */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SRGGB10, /* Bayer RG/GB */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SBGGR12, /* Bayer BG/GR */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SGBRG12, /* Bayer GB/RG */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SGRBG12, /* Bayer GR/BG */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SRGGB12, /* Bayer RG/GB */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SBGGR16, /* Bayer BG/GR */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SGBRG16, /* Bayer GB/RG */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SGRBG16, /* Bayer GR/BG */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_SRGGB16, /* Bayer RG/GB */
+		.vdownsampling = { 1 },
+		.bit_depth = { 16 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_HSV24, /* HSV 24bits */
+		.color_enc = TGP_COLOR_ENC_HSV,
+		.vdownsampling = { 1 },
+		.bit_depth = { 24 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_HSV32, /* HSV 32bits */
+		.color_enc = TGP_COLOR_ENC_HSV,
+		.vdownsampling = { 1 },
+		.bit_depth = { 32 },
+		.planes   = 1,
+		.buffers = 1,
+	},
+
+	/* Multiplanar formats */
+
+	{
+		.fourcc   = V4L2_PIX_FMT_NV16M,
+		.vdownsampling = { 1, 1 },
+		.bit_depth = { 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 2,
+		.data_offset = { PLANE0_DATA_OFFSET, 0 },
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_NV61M,
+		.vdownsampling = { 1, 1 },
+		.bit_depth = { 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 2,
+		.data_offset = { 0, PLANE0_DATA_OFFSET },
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YUV420M,
+		.vdownsampling = { 1, 2, 2 },
+		.bit_depth = { 8, 4, 4 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 3,
+		.buffers = 3,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YVU420M,
+		.vdownsampling = { 1, 2, 2 },
+		.bit_depth = { 8, 4, 4 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 3,
+		.buffers = 3,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_NV12M,
+		.vdownsampling = { 1, 2 },
+		.bit_depth = { 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 2,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_NV21M,
+		.vdownsampling = { 1, 2 },
+		.bit_depth = { 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 2,
+		.buffers = 2,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YUV422M,
+		.vdownsampling = { 1, 1, 1 },
+		.bit_depth = { 8, 4, 4 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 3,
+		.buffers = 3,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YVU422M,
+		.vdownsampling = { 1, 1, 1 },
+		.bit_depth = { 8, 4, 4 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 3,
+		.buffers = 3,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YUV444M,
+		.vdownsampling = { 1, 1, 1 },
+		.bit_depth = { 8, 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 3,
+		.buffers = 3,
+	},
+	{
+		.fourcc   = V4L2_PIX_FMT_YVU444M,
+		.vdownsampling = { 1, 1, 1 },
+		.bit_depth = { 8, 8, 8 },
+		.color_enc = TGP_COLOR_ENC_YCBCR,
+		.planes   = 3,
+		.buffers = 3,
+	},
+};
+
+/* There are this many multiplanar formats in the list */
+#define VIVID_MPLANAR_FORMATS 10
+
+const struct vivid_fmt *vivid_get_format(struct vivid_dev *dev, u32 pixelformat)
+{
+	const struct vivid_fmt *fmt;
+	unsigned k;
+
+	for (k = 0; k < ARRAY_SIZE(vivid_formats); k++) {
+		fmt = &vivid_formats[k];
+		if (fmt->fourcc == pixelformat)
+			if (fmt->buffers == 1 || dev->multiplanar)
+				return fmt;
+	}
+
+	return NULL;
+}
+
+bool vivid_vid_can_loop(struct vivid_dev *dev)
+{
+	if (dev->src_rect.width != dev->sink_rect.width ||
+	    dev->src_rect.height != dev->sink_rect.height)
+		return false;
+	if (dev->fmt_cap->fourcc != dev->fmt_out->fourcc)
+		return false;
+	if (dev->field_cap != dev->field_out)
+		return false;
+	/*
+	 * While this can be supported, it is just too much work
+	 * to actually implement.
+	 */
+	if (dev->field_cap == V4L2_FIELD_SEQ_TB ||
+	    dev->field_cap == V4L2_FIELD_SEQ_BT)
+		return false;
+	if (vivid_is_svid_cap(dev) && vivid_is_svid_out(dev)) {
+		if (!(dev->std_cap[dev->input] & V4L2_STD_525_60) !=
+		    !(dev->std_out & V4L2_STD_525_60))
+			return false;
+		return true;
+	}
+	if (vivid_is_hdmi_cap(dev) && vivid_is_hdmi_out(dev))
+		return true;
+	return false;
+}
+
+void vivid_send_source_change(struct vivid_dev *dev, unsigned type)
+{
+	struct v4l2_event ev = {
+		.type = V4L2_EVENT_SOURCE_CHANGE,
+		.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
+	};
+	unsigned i;
+
+	for (i = 0; i < dev->num_inputs; i++) {
+		ev.id = i;
+		if (dev->input_type[i] == type) {
+			if (video_is_registered(&dev->vid_cap_dev) && dev->has_vid_cap)
+				v4l2_event_queue(&dev->vid_cap_dev, &ev);
+			if (video_is_registered(&dev->vbi_cap_dev) && dev->has_vbi_cap)
+				v4l2_event_queue(&dev->vbi_cap_dev, &ev);
+		}
+	}
+}
+
+/*
+ * Conversion function that converts a single-planar format to a
+ * single-plane multiplanar format.
+ */
+void fmt_sp2mp(const struct v4l2_format *sp_fmt, struct v4l2_format *mp_fmt)
+{
+	struct v4l2_pix_format_mplane *mp = &mp_fmt->fmt.pix_mp;
+	struct v4l2_plane_pix_format *ppix = &mp->plane_fmt[0];
+	const struct v4l2_pix_format *pix = &sp_fmt->fmt.pix;
+	bool is_out = sp_fmt->type == V4L2_BUF_TYPE_VIDEO_OUTPUT;
+
+	memset(mp->reserved, 0, sizeof(mp->reserved));
+	mp_fmt->type = is_out ? V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :
+			   V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+	mp->width = pix->width;
+	mp->height = pix->height;
+	mp->pixelformat = pix->pixelformat;
+	mp->field = pix->field;
+	mp->colorspace = pix->colorspace;
+	mp->xfer_func = pix->xfer_func;
+	/* Also copies hsv_enc */
+	mp->ycbcr_enc = pix->ycbcr_enc;
+	mp->quantization = pix->quantization;
+	mp->num_planes = 1;
+	mp->flags = pix->flags;
+	ppix->sizeimage = pix->sizeimage;
+	ppix->bytesperline = pix->bytesperline;
+	memset(ppix->reserved, 0, sizeof(ppix->reserved));
+}
+
+int fmt_sp2mp_func(struct file *file, void *priv,
+		struct v4l2_format *f, fmtfunc func)
+{
+	struct v4l2_format fmt;
+	struct v4l2_pix_format_mplane *mp = &fmt.fmt.pix_mp;
+	struct v4l2_plane_pix_format *ppix = &mp->plane_fmt[0];
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	int ret;
+
+	/* Converts to a mplane format */
+	fmt_sp2mp(f, &fmt);
+	/* Passes it to the generic mplane format function */
+	ret = func(file, priv, &fmt);
+	/* Copies back the mplane data to the single plane format */
+	pix->width = mp->width;
+	pix->height = mp->height;
+	pix->pixelformat = mp->pixelformat;
+	pix->field = mp->field;
+	pix->colorspace = mp->colorspace;
+	pix->xfer_func = mp->xfer_func;
+	/* Also copies hsv_enc */
+	pix->ycbcr_enc = mp->ycbcr_enc;
+	pix->quantization = mp->quantization;
+	pix->sizeimage = ppix->sizeimage;
+	pix->bytesperline = ppix->bytesperline;
+	pix->flags = mp->flags;
+	return ret;
+}
+
+int vivid_vid_adjust_sel(unsigned flags, struct v4l2_rect *r)
+{
+	unsigned w = r->width;
+	unsigned h = r->height;
+
+	/* sanitize w and h in case someone passes ~0 as the value */
+	w &= 0xffff;
+	h &= 0xffff;
+	if (!(flags & V4L2_SEL_FLAG_LE)) {
+		w++;
+		h++;
+		if (w < 2)
+			w = 2;
+		if (h < 2)
+			h = 2;
+	}
+	if (!(flags & V4L2_SEL_FLAG_GE)) {
+		if (w > MAX_WIDTH)
+			w = MAX_WIDTH;
+		if (h > MAX_HEIGHT)
+			h = MAX_HEIGHT;
+	}
+	w = w & ~1;
+	h = h & ~1;
+	if (w < 2 || h < 2)
+		return -ERANGE;
+	if (w > MAX_WIDTH || h > MAX_HEIGHT)
+		return -ERANGE;
+	if (r->top < 0)
+		r->top = 0;
+	if (r->left < 0)
+		r->left = 0;
+	/* sanitize left and top in case someone passes ~0 as the value */
+	r->left &= 0xfffe;
+	r->top &= 0xfffe;
+	if (r->left + w > MAX_WIDTH)
+		r->left = MAX_WIDTH - w;
+	if (r->top + h > MAX_HEIGHT)
+		r->top = MAX_HEIGHT - h;
+	if ((flags & (V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE)) ==
+			(V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE) &&
+	    (r->width != w || r->height != h))
+		return -ERANGE;
+	r->width = w;
+	r->height = h;
+	return 0;
+}
+
+int vivid_enum_fmt_vid(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct vivid_fmt *fmt;
+
+	if (f->index >= ARRAY_SIZE(vivid_formats) -
+	    (dev->multiplanar ? 0 : VIVID_MPLANAR_FORMATS))
+		return -EINVAL;
+
+	fmt = &vivid_formats[f->index];
+
+	f->pixelformat = fmt->fourcc;
+	return 0;
+}
+
+int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX) {
+		if (!vivid_is_sdtv_cap(dev))
+			return -ENODATA;
+		*id = dev->std_cap[dev->input];
+	} else {
+		if (!vivid_is_svid_out(dev))
+			return -ENODATA;
+		*id = dev->std_out;
+	}
+	return 0;
+}
+
+int vidioc_g_dv_timings(struct file *file, void *_fh,
+				    struct v4l2_dv_timings *timings)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX) {
+		if (!vivid_is_hdmi_cap(dev))
+			return -ENODATA;
+		*timings = dev->dv_timings_cap[dev->input];
+	} else {
+		if (!vivid_is_hdmi_out(dev))
+			return -ENODATA;
+		*timings = dev->dv_timings_out;
+	}
+	return 0;
+}
+
+int vidioc_enum_dv_timings(struct file *file, void *_fh,
+				    struct v4l2_enum_dv_timings *timings)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX) {
+		if (!vivid_is_hdmi_cap(dev))
+			return -ENODATA;
+	} else {
+		if (!vivid_is_hdmi_out(dev))
+			return -ENODATA;
+	}
+	return v4l2_enum_dv_timings_cap(timings, &vivid_dv_timings_cap,
+			NULL, NULL);
+}
+
+int vidioc_dv_timings_cap(struct file *file, void *_fh,
+				    struct v4l2_dv_timings_cap *cap)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+
+	if (vdev->vfl_dir == VFL_DIR_RX) {
+		if (!vivid_is_hdmi_cap(dev))
+			return -ENODATA;
+	} else {
+		if (!vivid_is_hdmi_out(dev))
+			return -ENODATA;
+	}
+	*cap = vivid_dv_timings_cap;
+	return 0;
+}
+
+int vidioc_g_edid(struct file *file, void *_fh,
+			 struct v4l2_edid *edid)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+	struct cec_adapter *adap;
+
+	memset(edid->reserved, 0, sizeof(edid->reserved));
+	if (vdev->vfl_dir == VFL_DIR_RX) {
+		if (edid->pad >= dev->num_inputs)
+			return -EINVAL;
+		if (dev->input_type[edid->pad] != HDMI)
+			return -EINVAL;
+		adap = dev->cec_rx_adap;
+	} else {
+		unsigned int bus_idx;
+
+		if (edid->pad >= dev->num_outputs)
+			return -EINVAL;
+		if (dev->output_type[edid->pad] != HDMI)
+			return -EINVAL;
+		if (!dev->display_present[edid->pad])
+			return -ENODATA;
+		bus_idx = dev->cec_output2bus_map[edid->pad];
+		adap = dev->cec_tx_adap[bus_idx];
+	}
+	if (edid->start_block == 0 && edid->blocks == 0) {
+		edid->blocks = dev->edid_blocks;
+		return 0;
+	}
+	if (dev->edid_blocks == 0)
+		return -ENODATA;
+	if (edid->start_block >= dev->edid_blocks)
+		return -EINVAL;
+	if (edid->blocks > dev->edid_blocks - edid->start_block)
+		edid->blocks = dev->edid_blocks - edid->start_block;
+	if (adap)
+		v4l2_set_edid_phys_addr(dev->edid, dev->edid_blocks * 128, adap->phys_addr);
+	memcpy(edid->edid, dev->edid + edid->start_block * 128, edid->blocks * 128);
+	return 0;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-vid-common.h b/drivers/media/test-drivers/vivid/vivid-vid-common.h
new file mode 100644
index 000000000000..d908d9725283
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vid-common.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-vid-common.h - common video support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_VID_COMMON_H_
+#define _VIVID_VID_COMMON_H_
+
+typedef int (*fmtfunc)(struct file *file, void *priv, struct v4l2_format *f);
+
+/*
+ * Conversion function that converts a single-planar format to a
+ * single-plane multiplanar format.
+ */
+void fmt_sp2mp(const struct v4l2_format *sp_fmt, struct v4l2_format *mp_fmt);
+int fmt_sp2mp_func(struct file *file, void *priv,
+		struct v4l2_format *f, fmtfunc func);
+
+extern const struct v4l2_dv_timings_cap vivid_dv_timings_cap;
+
+const struct vivid_fmt *vivid_get_format(struct vivid_dev *dev, u32 pixelformat);
+
+bool vivid_vid_can_loop(struct vivid_dev *dev);
+void vivid_send_source_change(struct vivid_dev *dev, unsigned type);
+
+int vivid_vid_adjust_sel(unsigned flags, struct v4l2_rect *r);
+
+int vivid_enum_fmt_vid(struct file *file, void  *priv, struct v4l2_fmtdesc *f);
+int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id);
+int vidioc_g_dv_timings(struct file *file, void *_fh, struct v4l2_dv_timings *timings);
+int vidioc_enum_dv_timings(struct file *file, void *_fh, struct v4l2_enum_dv_timings *timings);
+int vidioc_dv_timings_cap(struct file *file, void *_fh, struct v4l2_dv_timings_cap *cap);
+int vidioc_g_edid(struct file *file, void *_fh, struct v4l2_edid *edid);
+int vidioc_subscribe_event(struct v4l2_fh *fh, const struct v4l2_event_subscription *sub);
+
+#endif
diff --git a/drivers/media/test-drivers/vivid/vivid-vid-out.c b/drivers/media/test-drivers/vivid/vivid-vid-out.c
new file mode 100644
index 000000000000..ee3446e3217c
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vid-out.c
@@ -0,0 +1,1210 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vivid-vid-out.c - video output support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-dv-timings.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-rect.h>
+
+#include "vivid-core.h"
+#include "vivid-vid-common.h"
+#include "vivid-kthread-out.h"
+#include "vivid-vid-out.h"
+
+static int vid_out_queue_setup(struct vb2_queue *vq,
+		       unsigned *nbuffers, unsigned *nplanes,
+		       unsigned sizes[], struct device *alloc_devs[])
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	const struct vivid_fmt *vfmt = dev->fmt_out;
+	unsigned planes = vfmt->buffers;
+	unsigned h = dev->fmt_out_rect.height;
+	unsigned int size = dev->bytesperline_out[0] * h + vfmt->data_offset[0];
+	unsigned p;
+
+	for (p = vfmt->buffers; p < vfmt->planes; p++)
+		size += dev->bytesperline_out[p] * h / vfmt->vdownsampling[p] +
+			vfmt->data_offset[p];
+
+	if (dev->field_out == V4L2_FIELD_ALTERNATE) {
+		/*
+		 * You cannot use write() with FIELD_ALTERNATE since the field
+		 * information (TOP/BOTTOM) cannot be passed to the kernel.
+		 */
+		if (vb2_fileio_is_active(vq))
+			return -EINVAL;
+	}
+
+	if (dev->queue_setup_error) {
+		/*
+		 * Error injection: test what happens if queue_setup() returns
+		 * an error.
+		 */
+		dev->queue_setup_error = false;
+		return -EINVAL;
+	}
+
+	if (*nplanes) {
+		/*
+		 * Check if the number of requested planes match
+		 * the number of planes in the current format. You can't mix that.
+		 */
+		if (*nplanes != planes)
+			return -EINVAL;
+		if (sizes[0] < size)
+			return -EINVAL;
+		for (p = 1; p < planes; p++) {
+			if (sizes[p] < dev->bytesperline_out[p] * h +
+				       vfmt->data_offset[p])
+				return -EINVAL;
+		}
+	} else {
+		for (p = 0; p < planes; p++)
+			sizes[p] = p ? dev->bytesperline_out[p] * h +
+				       vfmt->data_offset[p] : size;
+	}
+
+	if (vq->num_buffers + *nbuffers < 2)
+		*nbuffers = 2 - vq->num_buffers;
+
+	*nplanes = planes;
+
+	dprintk(dev, 1, "%s: count=%d\n", __func__, *nbuffers);
+	for (p = 0; p < planes; p++)
+		dprintk(dev, 1, "%s: size[%u]=%u\n", __func__, p, sizes[p]);
+	return 0;
+}
+
+static int vid_out_buf_out_validate(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (dev->field_out != V4L2_FIELD_ALTERNATE)
+		vbuf->field = dev->field_out;
+	else if (vbuf->field != V4L2_FIELD_TOP &&
+		 vbuf->field != V4L2_FIELD_BOTTOM)
+		return -EINVAL;
+	return 0;
+}
+
+static int vid_out_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	const struct vivid_fmt *vfmt = dev->fmt_out;
+	unsigned int planes = vfmt->buffers;
+	unsigned int h = dev->fmt_out_rect.height;
+	unsigned int size = dev->bytesperline_out[0] * h;
+	unsigned p;
+
+	for (p = vfmt->buffers; p < vfmt->planes; p++)
+		size += dev->bytesperline_out[p] * h / vfmt->vdownsampling[p];
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	if (WARN_ON(NULL == dev->fmt_out))
+		return -EINVAL;
+
+	if (dev->buf_prepare_error) {
+		/*
+		 * Error injection: test what happens if buf_prepare() returns
+		 * an error.
+		 */
+		dev->buf_prepare_error = false;
+		return -EINVAL;
+	}
+
+	for (p = 0; p < planes; p++) {
+		if (p)
+			size = dev->bytesperline_out[p] * h;
+		size += vb->planes[p].data_offset;
+
+		if (vb2_get_plane_payload(vb, p) < size) {
+			dprintk(dev, 1, "%s the payload is too small for plane %u (%lu < %u)\n",
+					__func__, p, vb2_get_plane_payload(vb, p), size);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static void vid_out_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+	struct vivid_buffer *buf = container_of(vbuf, struct vivid_buffer, vb);
+
+	dprintk(dev, 1, "%s\n", __func__);
+
+	spin_lock(&dev->slock);
+	list_add_tail(&buf->list, &dev->vid_out_active);
+	spin_unlock(&dev->slock);
+}
+
+static int vid_out_start_streaming(struct vb2_queue *vq, unsigned count)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+	int err;
+
+	if (vb2_is_streaming(&dev->vb_vid_cap_q))
+		dev->can_loop_video = vivid_vid_can_loop(dev);
+
+	dev->vid_out_seq_count = 0;
+	dprintk(dev, 1, "%s\n", __func__);
+	if (dev->start_streaming_error) {
+		dev->start_streaming_error = false;
+		err = -EINVAL;
+	} else {
+		err = vivid_start_generating_vid_out(dev, &dev->vid_out_streaming);
+	}
+	if (err) {
+		struct vivid_buffer *buf, *tmp;
+
+		list_for_each_entry_safe(buf, tmp, &dev->vid_out_active, list) {
+			list_del(&buf->list);
+			vb2_buffer_done(&buf->vb.vb2_buf,
+					VB2_BUF_STATE_QUEUED);
+		}
+	}
+	return err;
+}
+
+/* abort streaming and wait for last buffer */
+static void vid_out_stop_streaming(struct vb2_queue *vq)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vq);
+
+	dprintk(dev, 1, "%s\n", __func__);
+	vivid_stop_generating_vid_out(dev, &dev->vid_out_streaming);
+	dev->can_loop_video = false;
+}
+
+static void vid_out_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct vivid_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &dev->ctrl_hdl_vid_out);
+}
+
+const struct vb2_ops vivid_vid_out_qops = {
+	.queue_setup		= vid_out_queue_setup,
+	.buf_out_validate		= vid_out_buf_out_validate,
+	.buf_prepare		= vid_out_buf_prepare,
+	.buf_queue		= vid_out_buf_queue,
+	.start_streaming	= vid_out_start_streaming,
+	.stop_streaming		= vid_out_stop_streaming,
+	.buf_request_complete	= vid_out_buf_request_complete,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+/*
+ * Called whenever the format has to be reset which can occur when
+ * changing outputs, standard, timings, etc.
+ */
+void vivid_update_format_out(struct vivid_dev *dev)
+{
+	struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt;
+	unsigned size, p;
+	u64 pixelclock;
+
+	switch (dev->output_type[dev->output]) {
+	case SVID:
+	default:
+		dev->field_out = dev->tv_field_out;
+		dev->sink_rect.width = 720;
+		if (dev->std_out & V4L2_STD_525_60) {
+			dev->sink_rect.height = 480;
+			dev->timeperframe_vid_out = (struct v4l2_fract) { 1001, 30000 };
+			dev->service_set_out = V4L2_SLICED_CAPTION_525;
+		} else {
+			dev->sink_rect.height = 576;
+			dev->timeperframe_vid_out = (struct v4l2_fract) { 1000, 25000 };
+			dev->service_set_out = V4L2_SLICED_WSS_625 | V4L2_SLICED_TELETEXT_B;
+		}
+		dev->colorspace_out = V4L2_COLORSPACE_SMPTE170M;
+		break;
+	case HDMI:
+		dev->sink_rect.width = bt->width;
+		dev->sink_rect.height = bt->height;
+		size = V4L2_DV_BT_FRAME_WIDTH(bt) * V4L2_DV_BT_FRAME_HEIGHT(bt);
+
+		if (can_reduce_fps(bt) && (bt->flags & V4L2_DV_FL_REDUCED_FPS))
+			pixelclock = div_u64(bt->pixelclock * 1000, 1001);
+		else
+			pixelclock = bt->pixelclock;
+
+		dev->timeperframe_vid_out = (struct v4l2_fract) {
+			size / 100, (u32)pixelclock / 100
+		};
+		if (bt->interlaced)
+			dev->field_out = V4L2_FIELD_ALTERNATE;
+		else
+			dev->field_out = V4L2_FIELD_NONE;
+		if (!dev->dvi_d_out && (bt->flags & V4L2_DV_FL_IS_CE_VIDEO)) {
+			if (bt->width == 720 && bt->height <= 576)
+				dev->colorspace_out = V4L2_COLORSPACE_SMPTE170M;
+			else
+				dev->colorspace_out = V4L2_COLORSPACE_REC709;
+		} else {
+			dev->colorspace_out = V4L2_COLORSPACE_SRGB;
+		}
+		break;
+	}
+	dev->xfer_func_out = V4L2_XFER_FUNC_DEFAULT;
+	dev->ycbcr_enc_out = V4L2_YCBCR_ENC_DEFAULT;
+	dev->hsv_enc_out = V4L2_HSV_ENC_180;
+	dev->quantization_out = V4L2_QUANTIZATION_DEFAULT;
+	dev->compose_out = dev->sink_rect;
+	dev->compose_bounds_out = dev->sink_rect;
+	dev->crop_out = dev->compose_out;
+	if (V4L2_FIELD_HAS_T_OR_B(dev->field_out))
+		dev->crop_out.height /= 2;
+	dev->fmt_out_rect = dev->crop_out;
+	for (p = 0; p < dev->fmt_out->planes; p++)
+		dev->bytesperline_out[p] =
+			(dev->sink_rect.width * dev->fmt_out->bit_depth[p]) / 8;
+}
+
+/* Map the field to something that is valid for the current output */
+static enum v4l2_field vivid_field_out(struct vivid_dev *dev, enum v4l2_field field)
+{
+	if (vivid_is_svid_out(dev)) {
+		switch (field) {
+		case V4L2_FIELD_INTERLACED_TB:
+		case V4L2_FIELD_INTERLACED_BT:
+		case V4L2_FIELD_SEQ_TB:
+		case V4L2_FIELD_SEQ_BT:
+		case V4L2_FIELD_ALTERNATE:
+			return field;
+		case V4L2_FIELD_INTERLACED:
+		default:
+			return V4L2_FIELD_INTERLACED;
+		}
+	}
+	if (vivid_is_hdmi_out(dev))
+		return dev->dv_timings_out.bt.interlaced ? V4L2_FIELD_ALTERNATE :
+						       V4L2_FIELD_NONE;
+	return V4L2_FIELD_NONE;
+}
+
+static enum tpg_pixel_aspect vivid_get_pixel_aspect(const struct vivid_dev *dev)
+{
+	if (vivid_is_svid_out(dev))
+		return (dev->std_out & V4L2_STD_525_60) ?
+			TPG_PIXEL_ASPECT_NTSC : TPG_PIXEL_ASPECT_PAL;
+
+	if (vivid_is_hdmi_out(dev) &&
+	    dev->sink_rect.width == 720 && dev->sink_rect.height <= 576)
+		return dev->sink_rect.height == 480 ?
+			TPG_PIXEL_ASPECT_NTSC : TPG_PIXEL_ASPECT_PAL;
+
+	return TPG_PIXEL_ASPECT_SQUARE;
+}
+
+int vivid_g_fmt_vid_out(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
+	const struct vivid_fmt *fmt = dev->fmt_out;
+	unsigned p;
+
+	mp->width        = dev->fmt_out_rect.width;
+	mp->height       = dev->fmt_out_rect.height;
+	mp->field        = dev->field_out;
+	mp->pixelformat  = fmt->fourcc;
+	mp->colorspace   = dev->colorspace_out;
+	mp->xfer_func    = dev->xfer_func_out;
+	mp->ycbcr_enc    = dev->ycbcr_enc_out;
+	mp->quantization = dev->quantization_out;
+	mp->num_planes = fmt->buffers;
+	for (p = 0; p < mp->num_planes; p++) {
+		mp->plane_fmt[p].bytesperline = dev->bytesperline_out[p];
+		mp->plane_fmt[p].sizeimage =
+			mp->plane_fmt[p].bytesperline * mp->height +
+			fmt->data_offset[p];
+	}
+	for (p = fmt->buffers; p < fmt->planes; p++) {
+		unsigned stride = dev->bytesperline_out[p];
+
+		mp->plane_fmt[0].sizeimage +=
+			(stride * mp->height) / fmt->vdownsampling[p];
+	}
+	return 0;
+}
+
+int vivid_try_fmt_vid_out(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt;
+	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
+	struct v4l2_plane_pix_format *pfmt = mp->plane_fmt;
+	const struct vivid_fmt *fmt;
+	unsigned bytesperline, max_bpl;
+	unsigned factor = 1;
+	unsigned w, h;
+	unsigned p;
+
+	fmt = vivid_get_format(dev, mp->pixelformat);
+	if (!fmt) {
+		dprintk(dev, 1, "Fourcc format (0x%08x) unknown.\n",
+			mp->pixelformat);
+		mp->pixelformat = V4L2_PIX_FMT_YUYV;
+		fmt = vivid_get_format(dev, mp->pixelformat);
+	}
+
+	mp->field = vivid_field_out(dev, mp->field);
+	if (vivid_is_svid_out(dev)) {
+		w = 720;
+		h = (dev->std_out & V4L2_STD_525_60) ? 480 : 576;
+	} else {
+		w = dev->sink_rect.width;
+		h = dev->sink_rect.height;
+	}
+	if (V4L2_FIELD_HAS_T_OR_B(mp->field))
+		factor = 2;
+	if (!dev->has_scaler_out && !dev->has_crop_out && !dev->has_compose_out) {
+		mp->width = w;
+		mp->height = h / factor;
+	} else {
+		struct v4l2_rect r = { 0, 0, mp->width, mp->height * factor };
+
+		v4l2_rect_set_min_size(&r, &vivid_min_rect);
+		v4l2_rect_set_max_size(&r, &vivid_max_rect);
+		if (dev->has_scaler_out && !dev->has_crop_out) {
+			struct v4l2_rect max_r = { 0, 0, MAX_ZOOM * w, MAX_ZOOM * h };
+
+			v4l2_rect_set_max_size(&r, &max_r);
+		} else if (!dev->has_scaler_out && dev->has_compose_out && !dev->has_crop_out) {
+			v4l2_rect_set_max_size(&r, &dev->sink_rect);
+		} else if (!dev->has_scaler_out && !dev->has_compose_out) {
+			v4l2_rect_set_min_size(&r, &dev->sink_rect);
+		}
+		mp->width = r.width;
+		mp->height = r.height / factor;
+	}
+
+	/* This driver supports custom bytesperline values */
+
+	mp->num_planes = fmt->buffers;
+	for (p = 0; p < fmt->buffers; p++) {
+		/* Calculate the minimum supported bytesperline value */
+		bytesperline = (mp->width * fmt->bit_depth[p]) >> 3;
+		/* Calculate the maximum supported bytesperline value */
+		max_bpl = (MAX_ZOOM * MAX_WIDTH * fmt->bit_depth[p]) >> 3;
+
+		if (pfmt[p].bytesperline > max_bpl)
+			pfmt[p].bytesperline = max_bpl;
+		if (pfmt[p].bytesperline < bytesperline)
+			pfmt[p].bytesperline = bytesperline;
+
+		pfmt[p].sizeimage = (pfmt[p].bytesperline * mp->height) /
+				fmt->vdownsampling[p] + fmt->data_offset[p];
+
+		memset(pfmt[p].reserved, 0, sizeof(pfmt[p].reserved));
+	}
+	for (p = fmt->buffers; p < fmt->planes; p++)
+		pfmt[0].sizeimage += (pfmt[0].bytesperline * mp->height *
+			(fmt->bit_depth[p] / fmt->vdownsampling[p])) /
+			(fmt->bit_depth[0] / fmt->vdownsampling[0]);
+
+	mp->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+	mp->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+	mp->quantization = V4L2_QUANTIZATION_DEFAULT;
+	if (vivid_is_svid_out(dev)) {
+		mp->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	} else if (dev->dvi_d_out || !(bt->flags & V4L2_DV_FL_IS_CE_VIDEO)) {
+		mp->colorspace = V4L2_COLORSPACE_SRGB;
+		if (dev->dvi_d_out)
+			mp->quantization = V4L2_QUANTIZATION_LIM_RANGE;
+	} else if (bt->width == 720 && bt->height <= 576) {
+		mp->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	} else if (mp->colorspace != V4L2_COLORSPACE_SMPTE170M &&
+		   mp->colorspace != V4L2_COLORSPACE_REC709 &&
+		   mp->colorspace != V4L2_COLORSPACE_OPRGB &&
+		   mp->colorspace != V4L2_COLORSPACE_BT2020 &&
+		   mp->colorspace != V4L2_COLORSPACE_SRGB) {
+		mp->colorspace = V4L2_COLORSPACE_REC709;
+	}
+	memset(mp->reserved, 0, sizeof(mp->reserved));
+	return 0;
+}
+
+int vivid_s_fmt_vid_out(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct v4l2_pix_format_mplane *mp = &f->fmt.pix_mp;
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_rect *crop = &dev->crop_out;
+	struct v4l2_rect *compose = &dev->compose_out;
+	struct vb2_queue *q = &dev->vb_vid_out_q;
+	int ret = vivid_try_fmt_vid_out(file, priv, f);
+	unsigned factor = 1;
+	unsigned p;
+
+	if (ret < 0)
+		return ret;
+
+	if (vb2_is_busy(q) &&
+	    (vivid_is_svid_out(dev) ||
+	     mp->width != dev->fmt_out_rect.width ||
+	     mp->height != dev->fmt_out_rect.height ||
+	     mp->pixelformat != dev->fmt_out->fourcc ||
+	     mp->field != dev->field_out)) {
+		dprintk(dev, 1, "%s device busy\n", __func__);
+		return -EBUSY;
+	}
+
+	/*
+	 * Allow for changing the colorspace on the fly. Useful for testing
+	 * purposes, and it is something that HDMI transmitters are able
+	 * to do.
+	 */
+	if (vb2_is_busy(q))
+		goto set_colorspace;
+
+	dev->fmt_out = vivid_get_format(dev, mp->pixelformat);
+	if (V4L2_FIELD_HAS_T_OR_B(mp->field))
+		factor = 2;
+
+	if (dev->has_scaler_out || dev->has_crop_out || dev->has_compose_out) {
+		struct v4l2_rect r = { 0, 0, mp->width, mp->height };
+
+		if (dev->has_scaler_out) {
+			if (dev->has_crop_out)
+				v4l2_rect_map_inside(crop, &r);
+			else
+				*crop = r;
+			if (dev->has_compose_out && !dev->has_crop_out) {
+				struct v4l2_rect min_r = {
+					0, 0,
+					r.width / MAX_ZOOM,
+					factor * r.height / MAX_ZOOM
+				};
+				struct v4l2_rect max_r = {
+					0, 0,
+					r.width * MAX_ZOOM,
+					factor * r.height * MAX_ZOOM
+				};
+
+				v4l2_rect_set_min_size(compose, &min_r);
+				v4l2_rect_set_max_size(compose, &max_r);
+				v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
+			} else if (dev->has_compose_out) {
+				struct v4l2_rect min_r = {
+					0, 0,
+					crop->width / MAX_ZOOM,
+					factor * crop->height / MAX_ZOOM
+				};
+				struct v4l2_rect max_r = {
+					0, 0,
+					crop->width * MAX_ZOOM,
+					factor * crop->height * MAX_ZOOM
+				};
+
+				v4l2_rect_set_min_size(compose, &min_r);
+				v4l2_rect_set_max_size(compose, &max_r);
+				v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
+			}
+		} else if (dev->has_compose_out && !dev->has_crop_out) {
+			v4l2_rect_set_size_to(crop, &r);
+			r.height *= factor;
+			v4l2_rect_set_size_to(compose, &r);
+			v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
+		} else if (!dev->has_compose_out) {
+			v4l2_rect_map_inside(crop, &r);
+			r.height /= factor;
+			v4l2_rect_set_size_to(compose, &r);
+		} else {
+			r.height *= factor;
+			v4l2_rect_set_max_size(compose, &r);
+			v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
+			crop->top *= factor;
+			crop->height *= factor;
+			v4l2_rect_set_size_to(crop, compose);
+			v4l2_rect_map_inside(crop, &r);
+			crop->top /= factor;
+			crop->height /= factor;
+		}
+	} else {
+		struct v4l2_rect r = { 0, 0, mp->width, mp->height };
+
+		v4l2_rect_set_size_to(crop, &r);
+		r.height /= factor;
+		v4l2_rect_set_size_to(compose, &r);
+	}
+
+	dev->fmt_out_rect.width = mp->width;
+	dev->fmt_out_rect.height = mp->height;
+	for (p = 0; p < mp->num_planes; p++)
+		dev->bytesperline_out[p] = mp->plane_fmt[p].bytesperline;
+	for (p = dev->fmt_out->buffers; p < dev->fmt_out->planes; p++)
+		dev->bytesperline_out[p] =
+			(dev->bytesperline_out[0] * dev->fmt_out->bit_depth[p]) /
+			dev->fmt_out->bit_depth[0];
+	dev->field_out = mp->field;
+	if (vivid_is_svid_out(dev))
+		dev->tv_field_out = mp->field;
+
+set_colorspace:
+	dev->colorspace_out = mp->colorspace;
+	dev->xfer_func_out = mp->xfer_func;
+	dev->ycbcr_enc_out = mp->ycbcr_enc;
+	dev->quantization_out = mp->quantization;
+	if (dev->loop_video) {
+		vivid_send_source_change(dev, SVID);
+		vivid_send_source_change(dev, HDMI);
+	}
+	return 0;
+}
+
+int vidioc_g_fmt_vid_out_mplane(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!dev->multiplanar)
+		return -ENOTTY;
+	return vivid_g_fmt_vid_out(file, priv, f);
+}
+
+int vidioc_try_fmt_vid_out_mplane(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!dev->multiplanar)
+		return -ENOTTY;
+	return vivid_try_fmt_vid_out(file, priv, f);
+}
+
+int vidioc_s_fmt_vid_out_mplane(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!dev->multiplanar)
+		return -ENOTTY;
+	return vivid_s_fmt_vid_out(file, priv, f);
+}
+
+int vidioc_g_fmt_vid_out(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+	return fmt_sp2mp_func(file, priv, f, vivid_g_fmt_vid_out);
+}
+
+int vidioc_try_fmt_vid_out(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+	return fmt_sp2mp_func(file, priv, f, vivid_try_fmt_vid_out);
+}
+
+int vidioc_s_fmt_vid_out(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (dev->multiplanar)
+		return -ENOTTY;
+	return fmt_sp2mp_func(file, priv, f, vivid_s_fmt_vid_out);
+}
+
+int vivid_vid_out_g_selection(struct file *file, void *priv,
+			      struct v4l2_selection *sel)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!dev->has_crop_out && !dev->has_compose_out)
+		return -ENOTTY;
+	if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
+		return -EINVAL;
+
+	sel->r.left = sel->r.top = 0;
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP:
+		if (!dev->has_crop_out)
+			return -EINVAL;
+		sel->r = dev->crop_out;
+		break;
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+		if (!dev->has_crop_out)
+			return -EINVAL;
+		sel->r = dev->fmt_out_rect;
+		break;
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		if (!dev->has_crop_out)
+			return -EINVAL;
+		sel->r = vivid_max_rect;
+		break;
+	case V4L2_SEL_TGT_COMPOSE:
+		if (!dev->has_compose_out)
+			return -EINVAL;
+		sel->r = dev->compose_out;
+		break;
+	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+		if (!dev->has_compose_out)
+			return -EINVAL;
+		sel->r = dev->sink_rect;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int vivid_vid_out_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	struct v4l2_rect *crop = &dev->crop_out;
+	struct v4l2_rect *compose = &dev->compose_out;
+	unsigned factor = V4L2_FIELD_HAS_T_OR_B(dev->field_out) ? 2 : 1;
+	int ret;
+
+	if (!dev->has_crop_out && !dev->has_compose_out)
+		return -ENOTTY;
+	if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
+		return -EINVAL;
+
+	switch (s->target) {
+	case V4L2_SEL_TGT_CROP:
+		if (!dev->has_crop_out)
+			return -EINVAL;
+		ret = vivid_vid_adjust_sel(s->flags, &s->r);
+		if (ret)
+			return ret;
+		v4l2_rect_set_min_size(&s->r, &vivid_min_rect);
+		v4l2_rect_set_max_size(&s->r, &dev->fmt_out_rect);
+		if (dev->has_scaler_out) {
+			struct v4l2_rect max_rect = {
+				0, 0,
+				dev->sink_rect.width * MAX_ZOOM,
+				(dev->sink_rect.height / factor) * MAX_ZOOM
+			};
+
+			v4l2_rect_set_max_size(&s->r, &max_rect);
+			if (dev->has_compose_out) {
+				struct v4l2_rect min_rect = {
+					0, 0,
+					s->r.width / MAX_ZOOM,
+					(s->r.height * factor) / MAX_ZOOM
+				};
+				struct v4l2_rect max_rect = {
+					0, 0,
+					s->r.width * MAX_ZOOM,
+					(s->r.height * factor) * MAX_ZOOM
+				};
+
+				v4l2_rect_set_min_size(compose, &min_rect);
+				v4l2_rect_set_max_size(compose, &max_rect);
+				v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
+			}
+		} else if (dev->has_compose_out) {
+			s->r.top *= factor;
+			s->r.height *= factor;
+			v4l2_rect_set_max_size(&s->r, &dev->sink_rect);
+			v4l2_rect_set_size_to(compose, &s->r);
+			v4l2_rect_map_inside(compose, &dev->compose_bounds_out);
+			s->r.top /= factor;
+			s->r.height /= factor;
+		} else {
+			v4l2_rect_set_size_to(&s->r, &dev->sink_rect);
+			s->r.height /= factor;
+		}
+		v4l2_rect_map_inside(&s->r, &dev->fmt_out_rect);
+		*crop = s->r;
+		break;
+	case V4L2_SEL_TGT_COMPOSE:
+		if (!dev->has_compose_out)
+			return -EINVAL;
+		ret = vivid_vid_adjust_sel(s->flags, &s->r);
+		if (ret)
+			return ret;
+		v4l2_rect_set_min_size(&s->r, &vivid_min_rect);
+		v4l2_rect_set_max_size(&s->r, &dev->sink_rect);
+		v4l2_rect_map_inside(&s->r, &dev->compose_bounds_out);
+		s->r.top /= factor;
+		s->r.height /= factor;
+		if (dev->has_scaler_out) {
+			struct v4l2_rect fmt = dev->fmt_out_rect;
+			struct v4l2_rect max_rect = {
+				0, 0,
+				s->r.width * MAX_ZOOM,
+				s->r.height * MAX_ZOOM
+			};
+			struct v4l2_rect min_rect = {
+				0, 0,
+				s->r.width / MAX_ZOOM,
+				s->r.height / MAX_ZOOM
+			};
+
+			v4l2_rect_set_min_size(&fmt, &min_rect);
+			if (!dev->has_crop_out)
+				v4l2_rect_set_max_size(&fmt, &max_rect);
+			if (!v4l2_rect_same_size(&dev->fmt_out_rect, &fmt) &&
+			    vb2_is_busy(&dev->vb_vid_out_q))
+				return -EBUSY;
+			if (dev->has_crop_out) {
+				v4l2_rect_set_min_size(crop, &min_rect);
+				v4l2_rect_set_max_size(crop, &max_rect);
+			}
+			dev->fmt_out_rect = fmt;
+		} else if (dev->has_crop_out) {
+			struct v4l2_rect fmt = dev->fmt_out_rect;
+
+			v4l2_rect_set_min_size(&fmt, &s->r);
+			if (!v4l2_rect_same_size(&dev->fmt_out_rect, &fmt) &&
+			    vb2_is_busy(&dev->vb_vid_out_q))
+				return -EBUSY;
+			dev->fmt_out_rect = fmt;
+			v4l2_rect_set_size_to(crop, &s->r);
+			v4l2_rect_map_inside(crop, &dev->fmt_out_rect);
+		} else {
+			if (!v4l2_rect_same_size(&s->r, &dev->fmt_out_rect) &&
+			    vb2_is_busy(&dev->vb_vid_out_q))
+				return -EBUSY;
+			v4l2_rect_set_size_to(&dev->fmt_out_rect, &s->r);
+			v4l2_rect_set_size_to(crop, &s->r);
+			crop->height /= factor;
+			v4l2_rect_map_inside(crop, &dev->fmt_out_rect);
+		}
+		s->r.top *= factor;
+		s->r.height *= factor;
+		if (dev->bitmap_out && (compose->width != s->r.width ||
+					compose->height != s->r.height)) {
+			vfree(dev->bitmap_out);
+			dev->bitmap_out = NULL;
+		}
+		*compose = s->r;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int vivid_vid_out_g_pixelaspect(struct file *file, void *priv,
+				int type, struct v4l2_fract *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
+		return -EINVAL;
+
+	switch (vivid_get_pixel_aspect(dev)) {
+	case TPG_PIXEL_ASPECT_NTSC:
+		f->numerator = 11;
+		f->denominator = 10;
+		break;
+	case TPG_PIXEL_ASPECT_PAL:
+		f->numerator = 54;
+		f->denominator = 59;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+int vidioc_g_fmt_vid_out_overlay(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct v4l2_rect *compose = &dev->compose_out;
+	struct v4l2_window *win = &f->fmt.win;
+	unsigned clipcount = win->clipcount;
+
+	if (!dev->has_fb)
+		return -EINVAL;
+	win->w.top = dev->overlay_out_top;
+	win->w.left = dev->overlay_out_left;
+	win->w.width = compose->width;
+	win->w.height = compose->height;
+	win->clipcount = dev->clipcount_out;
+	win->field = V4L2_FIELD_ANY;
+	win->chromakey = dev->chromakey_out;
+	win->global_alpha = dev->global_alpha_out;
+	if (clipcount > dev->clipcount_out)
+		clipcount = dev->clipcount_out;
+	if (dev->bitmap_out == NULL)
+		win->bitmap = NULL;
+	else if (win->bitmap) {
+		if (copy_to_user(win->bitmap, dev->bitmap_out,
+		    ((dev->compose_out.width + 7) / 8) * dev->compose_out.height))
+			return -EFAULT;
+	}
+	if (clipcount && win->clips) {
+		if (copy_to_user(win->clips, dev->clips_out,
+				 clipcount * sizeof(dev->clips_out[0])))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+int vidioc_try_fmt_vid_out_overlay(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct v4l2_rect *compose = &dev->compose_out;
+	struct v4l2_window *win = &f->fmt.win;
+	int i, j;
+
+	if (!dev->has_fb)
+		return -EINVAL;
+	win->w.left = clamp_t(int, win->w.left,
+			      -dev->display_width, dev->display_width);
+	win->w.top = clamp_t(int, win->w.top,
+			     -dev->display_height, dev->display_height);
+	win->w.width = compose->width;
+	win->w.height = compose->height;
+	/*
+	 * It makes no sense for an OSD to overlay only top or bottom fields,
+	 * so always set this to ANY.
+	 */
+	win->field = V4L2_FIELD_ANY;
+	if (win->clipcount && !win->clips)
+		win->clipcount = 0;
+	if (win->clipcount > MAX_CLIPS)
+		win->clipcount = MAX_CLIPS;
+	if (win->clipcount) {
+		if (copy_from_user(dev->try_clips_out, win->clips,
+				   win->clipcount * sizeof(dev->clips_out[0])))
+			return -EFAULT;
+		for (i = 0; i < win->clipcount; i++) {
+			struct v4l2_rect *r = &dev->try_clips_out[i].c;
+
+			r->top = clamp_t(s32, r->top, 0, dev->display_height - 1);
+			r->height = clamp_t(s32, r->height, 1, dev->display_height - r->top);
+			r->left = clamp_t(u32, r->left, 0, dev->display_width - 1);
+			r->width = clamp_t(u32, r->width, 1, dev->display_width - r->left);
+		}
+		/*
+		 * Yeah, so sue me, it's an O(n^2) algorithm. But n is a small
+		 * number and it's typically a one-time deal.
+		 */
+		for (i = 0; i < win->clipcount - 1; i++) {
+			struct v4l2_rect *r1 = &dev->try_clips_out[i].c;
+
+			for (j = i + 1; j < win->clipcount; j++) {
+				struct v4l2_rect *r2 = &dev->try_clips_out[j].c;
+
+				if (v4l2_rect_overlap(r1, r2))
+					return -EINVAL;
+			}
+		}
+		if (copy_to_user(win->clips, dev->try_clips_out,
+				 win->clipcount * sizeof(dev->clips_out[0])))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+int vidioc_s_fmt_vid_out_overlay(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const struct v4l2_rect *compose = &dev->compose_out;
+	struct v4l2_window *win = &f->fmt.win;
+	int ret = vidioc_try_fmt_vid_out_overlay(file, priv, f);
+	unsigned bitmap_size = ((compose->width + 7) / 8) * compose->height;
+	unsigned clips_size = win->clipcount * sizeof(dev->clips_out[0]);
+	void *new_bitmap = NULL;
+
+	if (ret)
+		return ret;
+
+	if (win->bitmap) {
+		new_bitmap = vzalloc(bitmap_size);
+
+		if (!new_bitmap)
+			return -ENOMEM;
+		if (copy_from_user(new_bitmap, win->bitmap, bitmap_size)) {
+			vfree(new_bitmap);
+			return -EFAULT;
+		}
+	}
+
+	dev->overlay_out_top = win->w.top;
+	dev->overlay_out_left = win->w.left;
+	vfree(dev->bitmap_out);
+	dev->bitmap_out = new_bitmap;
+	dev->clipcount_out = win->clipcount;
+	if (dev->clipcount_out)
+		memcpy(dev->clips_out, dev->try_clips_out, clips_size);
+	dev->chromakey_out = win->chromakey;
+	dev->global_alpha_out = win->global_alpha;
+	return ret;
+}
+
+int vivid_vid_out_overlay(struct file *file, void *fh, unsigned i)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (i && !dev->fmt_out->can_do_overlay) {
+		dprintk(dev, 1, "unsupported output format for output overlay\n");
+		return -EINVAL;
+	}
+
+	dev->overlay_out_enabled = i;
+	return 0;
+}
+
+int vivid_vid_out_g_fbuf(struct file *file, void *fh,
+				struct v4l2_framebuffer *a)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	a->capability = V4L2_FBUF_CAP_EXTERNOVERLAY |
+			V4L2_FBUF_CAP_BITMAP_CLIPPING |
+			V4L2_FBUF_CAP_LIST_CLIPPING |
+			V4L2_FBUF_CAP_CHROMAKEY |
+			V4L2_FBUF_CAP_SRC_CHROMAKEY |
+			V4L2_FBUF_CAP_GLOBAL_ALPHA |
+			V4L2_FBUF_CAP_LOCAL_ALPHA |
+			V4L2_FBUF_CAP_LOCAL_INV_ALPHA;
+	a->flags = V4L2_FBUF_FLAG_OVERLAY | dev->fbuf_out_flags;
+	a->base = (void *)dev->video_pbase;
+	a->fmt.width = dev->display_width;
+	a->fmt.height = dev->display_height;
+	if (dev->fb_defined.green.length == 5)
+		a->fmt.pixelformat = V4L2_PIX_FMT_ARGB555;
+	else
+		a->fmt.pixelformat = V4L2_PIX_FMT_RGB565;
+	a->fmt.bytesperline = dev->display_byte_stride;
+	a->fmt.sizeimage = a->fmt.height * a->fmt.bytesperline;
+	a->fmt.field = V4L2_FIELD_NONE;
+	a->fmt.colorspace = V4L2_COLORSPACE_SRGB;
+	a->fmt.priv = 0;
+	return 0;
+}
+
+int vivid_vid_out_s_fbuf(struct file *file, void *fh,
+				const struct v4l2_framebuffer *a)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	const unsigned chroma_flags = V4L2_FBUF_FLAG_CHROMAKEY |
+				      V4L2_FBUF_FLAG_SRC_CHROMAKEY;
+	const unsigned alpha_flags = V4L2_FBUF_FLAG_GLOBAL_ALPHA |
+				     V4L2_FBUF_FLAG_LOCAL_ALPHA |
+				     V4L2_FBUF_FLAG_LOCAL_INV_ALPHA;
+
+
+	if ((a->flags & chroma_flags) == chroma_flags)
+		return -EINVAL;
+	switch (a->flags & alpha_flags) {
+	case 0:
+	case V4L2_FBUF_FLAG_GLOBAL_ALPHA:
+	case V4L2_FBUF_FLAG_LOCAL_ALPHA:
+	case V4L2_FBUF_FLAG_LOCAL_INV_ALPHA:
+		break;
+	default:
+		return -EINVAL;
+	}
+	dev->fbuf_out_flags &= ~(chroma_flags | alpha_flags);
+	dev->fbuf_out_flags = a->flags & (chroma_flags | alpha_flags);
+	return 0;
+}
+
+static const struct v4l2_audioout vivid_audio_outputs[] = {
+	{ 0, "Line-Out 1" },
+	{ 1, "Line-Out 2" },
+};
+
+int vidioc_enum_output(struct file *file, void *priv,
+				struct v4l2_output *out)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (out->index >= dev->num_outputs)
+		return -EINVAL;
+
+	out->type = V4L2_OUTPUT_TYPE_ANALOG;
+	switch (dev->output_type[out->index]) {
+	case SVID:
+		snprintf(out->name, sizeof(out->name), "S-Video %u",
+				dev->output_name_counter[out->index]);
+		out->std = V4L2_STD_ALL;
+		if (dev->has_audio_outputs)
+			out->audioset = (1 << ARRAY_SIZE(vivid_audio_outputs)) - 1;
+		out->capabilities = V4L2_OUT_CAP_STD;
+		break;
+	case HDMI:
+		snprintf(out->name, sizeof(out->name), "HDMI %u",
+				dev->output_name_counter[out->index]);
+		out->capabilities = V4L2_OUT_CAP_DV_TIMINGS;
+		break;
+	}
+	return 0;
+}
+
+int vidioc_g_output(struct file *file, void *priv, unsigned *o)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	*o = dev->output;
+	return 0;
+}
+
+int vidioc_s_output(struct file *file, void *priv, unsigned o)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (o >= dev->num_outputs)
+		return -EINVAL;
+
+	if (o == dev->output)
+		return 0;
+
+	if (vb2_is_busy(&dev->vb_vid_out_q) ||
+	    vb2_is_busy(&dev->vb_vbi_out_q) ||
+	    vb2_is_busy(&dev->vb_meta_out_q))
+		return -EBUSY;
+
+	dev->output = o;
+	dev->tv_audio_output = 0;
+	if (dev->output_type[o] == SVID)
+		dev->vid_out_dev.tvnorms = V4L2_STD_ALL;
+	else
+		dev->vid_out_dev.tvnorms = 0;
+
+	dev->vbi_out_dev.tvnorms = dev->vid_out_dev.tvnorms;
+	dev->meta_out_dev.tvnorms = dev->vid_out_dev.tvnorms;
+	vivid_update_format_out(dev);
+
+	v4l2_ctrl_activate(dev->ctrl_display_present, vivid_is_hdmi_out(dev));
+	if (vivid_is_hdmi_out(dev))
+		v4l2_ctrl_s_ctrl(dev->ctrl_display_present,
+				 dev->display_present[dev->output]);
+
+	return 0;
+}
+
+int vidioc_enumaudout(struct file *file, void *fh, struct v4l2_audioout *vout)
+{
+	if (vout->index >= ARRAY_SIZE(vivid_audio_outputs))
+		return -EINVAL;
+	*vout = vivid_audio_outputs[vout->index];
+	return 0;
+}
+
+int vidioc_g_audout(struct file *file, void *fh, struct v4l2_audioout *vout)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_svid_out(dev))
+		return -EINVAL;
+	*vout = vivid_audio_outputs[dev->tv_audio_output];
+	return 0;
+}
+
+int vidioc_s_audout(struct file *file, void *fh, const struct v4l2_audioout *vout)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_svid_out(dev))
+		return -EINVAL;
+	if (vout->index >= ARRAY_SIZE(vivid_audio_outputs))
+		return -EINVAL;
+	dev->tv_audio_output = vout->index;
+	return 0;
+}
+
+int vivid_vid_out_s_std(struct file *file, void *priv, v4l2_std_id id)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (!vivid_is_svid_out(dev))
+		return -ENODATA;
+	if (dev->std_out == id)
+		return 0;
+	if (vb2_is_busy(&dev->vb_vid_out_q) || vb2_is_busy(&dev->vb_vbi_out_q))
+		return -EBUSY;
+	dev->std_out = id;
+	vivid_update_format_out(dev);
+	return 0;
+}
+
+static bool valid_cvt_gtf_timings(struct v4l2_dv_timings *timings)
+{
+	struct v4l2_bt_timings *bt = &timings->bt;
+
+	if ((bt->standards & (V4L2_DV_BT_STD_CVT | V4L2_DV_BT_STD_GTF)) &&
+	    v4l2_valid_dv_timings(timings, &vivid_dv_timings_cap, NULL, NULL))
+		return true;
+
+	return false;
+}
+
+int vivid_vid_out_s_dv_timings(struct file *file, void *_fh,
+				    struct v4l2_dv_timings *timings)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+	if (!vivid_is_hdmi_out(dev))
+		return -ENODATA;
+	if (!v4l2_find_dv_timings_cap(timings, &vivid_dv_timings_cap,
+				0, NULL, NULL) &&
+	    !valid_cvt_gtf_timings(timings))
+		return -EINVAL;
+	if (v4l2_match_dv_timings(timings, &dev->dv_timings_out, 0, true))
+		return 0;
+	if (vb2_is_busy(&dev->vb_vid_out_q))
+		return -EBUSY;
+	dev->dv_timings_out = *timings;
+	vivid_update_format_out(dev);
+	return 0;
+}
+
+int vivid_vid_out_g_parm(struct file *file, void *priv,
+			  struct v4l2_streamparm *parm)
+{
+	struct vivid_dev *dev = video_drvdata(file);
+
+	if (parm->type != (dev->multiplanar ?
+			   V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :
+			   V4L2_BUF_TYPE_VIDEO_OUTPUT))
+		return -EINVAL;
+
+	parm->parm.output.capability   = V4L2_CAP_TIMEPERFRAME;
+	parm->parm.output.timeperframe = dev->timeperframe_vid_out;
+	parm->parm.output.writebuffers  = 1;
+
+	return 0;
+}
+
+int vidioc_subscribe_event(struct v4l2_fh *fh,
+			const struct v4l2_event_subscription *sub)
+{
+	switch (sub->type) {
+	case V4L2_EVENT_SOURCE_CHANGE:
+		if (fh->vdev->vfl_dir == VFL_DIR_RX)
+			return v4l2_src_change_event_subscribe(fh, sub);
+		break;
+	default:
+		return v4l2_ctrl_subscribe_event(fh, sub);
+	}
+	return -EINVAL;
+}
diff --git a/drivers/media/test-drivers/vivid/vivid-vid-out.h b/drivers/media/test-drivers/vivid/vivid-vid-out.h
new file mode 100644
index 000000000000..8d56314f4ea1
--- /dev/null
+++ b/drivers/media/test-drivers/vivid/vivid-vid-out.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vivid-vid-out.h - video output support functions.
+ *
+ * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _VIVID_VID_OUT_H_
+#define _VIVID_VID_OUT_H_
+
+extern const struct vb2_ops vivid_vid_out_qops;
+
+void vivid_update_format_out(struct vivid_dev *dev);
+
+int vivid_g_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_try_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_s_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_g_fmt_vid_out_mplane(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_try_fmt_vid_out_mplane(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_s_fmt_vid_out_mplane(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_g_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_try_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_s_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_vid_out_g_selection(struct file *file, void *priv, struct v4l2_selection *sel);
+int vivid_vid_out_s_selection(struct file *file, void *fh, struct v4l2_selection *s);
+int vivid_vid_out_g_pixelaspect(struct file *file, void *priv, int type, struct v4l2_fract *f);
+int vidioc_enum_fmt_vid_out_overlay(struct file *file, void  *priv, struct v4l2_fmtdesc *f);
+int vidioc_g_fmt_vid_out_overlay(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_try_fmt_vid_out_overlay(struct file *file, void *priv, struct v4l2_format *f);
+int vidioc_s_fmt_vid_out_overlay(struct file *file, void *priv, struct v4l2_format *f);
+int vivid_vid_out_overlay(struct file *file, void *fh, unsigned i);
+int vivid_vid_out_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *a);
+int vivid_vid_out_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *a);
+int vidioc_enum_output(struct file *file, void *priv, struct v4l2_output *out);
+int vidioc_g_output(struct file *file, void *priv, unsigned *i);
+int vidioc_s_output(struct file *file, void *priv, unsigned i);
+int vidioc_enumaudout(struct file *file, void *fh, struct v4l2_audioout *vout);
+int vidioc_g_audout(struct file *file, void *fh, struct v4l2_audioout *vout);
+int vidioc_s_audout(struct file *file, void *fh, const struct v4l2_audioout *vout);
+int vivid_vid_out_s_std(struct file *file, void *priv, v4l2_std_id id);
+int vivid_vid_out_s_dv_timings(struct file *file, void *_fh, struct v4l2_dv_timings *timings);
+int vivid_vid_out_g_parm(struct file *file, void *priv, struct v4l2_streamparm *parm);
+
+#endif
diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig
index e104bb7766e1..4605bb377574 100644
--- a/drivers/media/tuners/Kconfig
+++ b/drivers/media/tuners/Kconfig
@@ -15,7 +15,7 @@ config MEDIA_TUNER
 	select MEDIA_TUNER_TDA9887 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT
 
-comment "Tuner drivers hidden by 'Autoselect ancillary drivers'"
+comment "Tuner drivers auto-selected by 'Autoselect ancillary drivers'"
 	depends on MEDIA_HIDE_ANCILLARY_SUBDRV
 	depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
 
@@ -223,7 +223,7 @@ config MEDIA_TUNER_TDA18212
 
 config MEDIA_TUNER_E4000
 	tristate "Elonics E4000 silicon tuner"
-	depends on MEDIA_SUPPORT && I2C
+	depends on MEDIA_SUPPORT && I2C && VIDEO_V4L2
 	select REGMAP_I2C
 	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
@@ -231,7 +231,7 @@ config MEDIA_TUNER_E4000
 
 config MEDIA_TUNER_FC2580
 	tristate "FCI FC2580 silicon tuner"
-	depends on MEDIA_SUPPORT && I2C
+	depends on MEDIA_SUPPORT && I2C && VIDEO_V4L2
 	select REGMAP_I2C
 	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index 898e0f9f8b70..fefb2625f655 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -9,6 +9,10 @@
 
 static const struct dvb_tuner_ops si2157_ops;
 
+static int tuner_lock_debug;
+module_param(tuner_lock_debug, int, 0644);
+MODULE_PARM_DESC(tuner_lock_debug, "if set, signal lock is briefly waited on after setting params");
+
 /* execute firmware command */
 static int si2157_cmd_execute(struct i2c_client *client, struct si2157_cmd *cmd)
 {
@@ -47,14 +51,20 @@ static int si2157_cmd_execute(struct i2c_client *client, struct si2157_cmd *cmd)
 				break;
 		}
 
-		dev_dbg(&client->dev, "cmd execution took %d ms\n",
-				jiffies_to_msecs(jiffies) -
-				(jiffies_to_msecs(timeout) - TIMEOUT));
+		dev_dbg(&client->dev, "cmd execution took %d ms, status=%x\n",
+			jiffies_to_msecs(jiffies) -
+			(jiffies_to_msecs(timeout) - TIMEOUT),
+			cmd->args[0]);
 
 		if (!((cmd->args[0] >> 7) & 0x01)) {
 			ret = -ETIMEDOUT;
 			goto err_mutex_unlock;
 		}
+		/* check error status bit */
+		if (cmd->args[0] & 0x40) {
+			ret = -EAGAIN;
+			goto err_mutex_unlock;
+		}
 	}
 
 	mutex_unlock(&dev->i2c_mutex);
@@ -75,24 +85,23 @@ static int si2157_init(struct dvb_frontend *fe)
 	struct si2157_cmd cmd;
 	const struct firmware *fw;
 	const char *fw_name;
-	unsigned int uitmp, chip_id;
+	unsigned int chip_id, xtal_trim;
 
 	dev_dbg(&client->dev, "\n");
 
-	/* Returned IF frequency is garbage when firmware is not running */
-	memcpy(cmd.args, "\x15\x00\x06\x07", 4);
+	/* Try to get Xtal trim property, to verify tuner still running */
+	memcpy(cmd.args, "\x15\x00\x04\x02", 4);
 	cmd.wlen = 4;
 	cmd.rlen = 4;
 	ret = si2157_cmd_execute(client, &cmd);
-	if (ret)
-		goto err;
 
-	uitmp = cmd.args[2] << 0 | cmd.args[3] << 8;
-	dev_dbg(&client->dev, "if_frequency kHz=%u\n", uitmp);
+	xtal_trim = cmd.args[2] | (cmd.args[3] << 8);
 
-	if (uitmp == dev->if_frequency / 1000)
+	if (ret == 0 && xtal_trim < 16)
 		goto warm;
 
+	dev->if_frequency = 0; /* we no longer know current tuner state */
+
 	/* power up */
 	if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
 		memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
@@ -106,7 +115,7 @@ static int si2157_init(struct dvb_frontend *fe)
 	}
 	cmd.rlen = 1;
 	ret = si2157_cmd_execute(client, &cmd);
-	if (ret)
+	if (ret && (dev->chiptype != SI2157_CHIPTYPE_SI2141 || ret != -EAGAIN))
 		goto err;
 
 	/* Si2141 needs a second command before it answers the revision query */
@@ -230,6 +239,28 @@ static int si2157_init(struct dvb_frontend *fe)
 
 	dev_info(&client->dev, "firmware version: %c.%c.%d\n",
 			cmd.args[6], cmd.args[7], cmd.args[8]);
+
+	/* enable tuner status flags */
+	memcpy(cmd.args, "\x14\x00\x01\x05\x01\x00", 6);
+	cmd.wlen = 6;
+	cmd.rlen = 1;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	memcpy(cmd.args, "\x14\x00\x01\x06\x01\x00", 6);
+	cmd.wlen = 6;
+	cmd.rlen = 1;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	memcpy(cmd.args, "\x14\x00\x01\x07\x01\x00", 6);
+	cmd.wlen = 6;
+	cmd.rlen = 1;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
 warm:
 	/* init statistics in order signal app which are supported */
 	c->strength.len = 1;
@@ -274,6 +305,93 @@ static int si2157_sleep(struct dvb_frontend *fe)
 	return ret;
 }
 
+static int si2157_tune_wait(struct i2c_client *client, u8 is_digital)
+{
+#define TUN_TIMEOUT 40
+#define DIG_TIMEOUT 30
+#define ANALOG_TIMEOUT 150
+	struct si2157_dev *dev = i2c_get_clientdata(client);
+	int ret;
+	unsigned long timeout;
+	unsigned long start_time;
+	u8 wait_status;
+	u8  tune_lock_mask;
+
+	if (is_digital)
+		tune_lock_mask = 0x04;
+	else
+		tune_lock_mask = 0x02;
+
+	mutex_lock(&dev->i2c_mutex);
+
+	/* wait tuner command complete */
+	start_time = jiffies;
+	timeout = start_time + msecs_to_jiffies(TUN_TIMEOUT);
+	while (1) {
+		ret = i2c_master_recv(client, &wait_status,
+				      sizeof(wait_status));
+		if (ret < 0) {
+			goto err_mutex_unlock;
+		} else if (ret != sizeof(wait_status)) {
+			ret = -EREMOTEIO;
+			goto err_mutex_unlock;
+		}
+
+		if (time_after(jiffies, timeout))
+			break;
+
+		/* tuner done? */
+		if ((wait_status & 0x81) == 0x81)
+			break;
+		usleep_range(5000, 10000);
+	}
+
+	dev_dbg(&client->dev, "tuning took %d ms, status=0x%x\n",
+		jiffies_to_msecs(jiffies) - jiffies_to_msecs(start_time),
+		wait_status);
+
+	/* if we tuned ok, wait a bit for tuner lock */
+	if (tuner_lock_debug && (wait_status & 0x81) == 0x81) {
+		if (is_digital)
+			timeout = jiffies + msecs_to_jiffies(DIG_TIMEOUT);
+		else
+			timeout = jiffies + msecs_to_jiffies(ANALOG_TIMEOUT);
+
+		while (!time_after(jiffies, timeout)) {
+			ret = i2c_master_recv(client, &wait_status,
+					      sizeof(wait_status));
+			if (ret < 0) {
+				goto err_mutex_unlock;
+			} else if (ret != sizeof(wait_status)) {
+				ret = -EREMOTEIO;
+				goto err_mutex_unlock;
+			}
+
+			/* tuner locked? */
+			if (wait_status & tune_lock_mask)
+				break;
+			usleep_range(5000, 10000);
+		}
+
+		dev_dbg(&client->dev, "tuning+lock took %d ms, status=0x%x\n",
+			jiffies_to_msecs(jiffies) - jiffies_to_msecs(start_time),
+			wait_status);
+	}
+
+	if ((wait_status & 0xc0) != 0x80) {
+		ret = -ETIMEDOUT;
+		goto err_mutex_unlock;
+	}
+
+	mutex_unlock(&dev->i2c_mutex);
+	return 0;
+
+err_mutex_unlock:
+	mutex_unlock(&dev->i2c_mutex);
+	dev_err(&client->dev, "failed=%d\n", ret);
+	return ret;
+}
+
 static int si2157_set_params(struct dvb_frontend *fe)
 {
 	struct i2c_client *client = fe->tuner_priv;
@@ -344,7 +462,7 @@ static int si2157_set_params(struct dvb_frontend *fe)
 	if (ret)
 		goto err;
 
-	/* set if frequency if needed */
+	/* set digital if frequency if needed */
 	if (if_frequency != dev->if_frequency) {
 		memcpy(cmd.args, "\x14\x00\x06\x07", 4);
 		cmd.args[4] = (if_frequency / 1000) & 0xff;
@@ -358,7 +476,7 @@ static int si2157_set_params(struct dvb_frontend *fe)
 		dev->if_frequency = if_frequency;
 	}
 
-	/* set frequency */
+	/* set digital frequency */
 	memcpy(cmd.args, "\x41\x00\x00\x00\x00\x00\x00\x00", 8);
 	cmd.args[4] = (c->frequency >>  0) & 0xff;
 	cmd.args[5] = (c->frequency >>  8) & 0xff;
@@ -370,21 +488,283 @@ static int si2157_set_params(struct dvb_frontend *fe)
 	if (ret)
 		goto err;
 
+	dev->bandwidth = bandwidth;
+	dev->frequency = c->frequency;
+
+	si2157_tune_wait(client, 1); /* wait to complete, ignore any errors */
+
 	return 0;
 err:
+	dev->bandwidth = 0;
+	dev->frequency = 0;
+	dev->if_frequency = 0;
 	dev_dbg(&client->dev, "failed=%d\n", ret);
 	return ret;
 }
 
+static int si2157_set_analog_params(struct dvb_frontend *fe,
+				    struct analog_parameters *params)
+{
+	struct i2c_client *client = fe->tuner_priv;
+	struct si2157_dev *dev = i2c_get_clientdata(client);
+	char *std; /* for debugging */
+	int ret;
+	struct si2157_cmd cmd;
+	u32 bandwidth = 0;
+	u32 if_frequency = 0;
+	u32 freq = 0;
+	u64 tmp_lval = 0;
+	u8 system = 0;
+	u8 color = 0;    /* 0=NTSC/PAL, 0x10=SECAM */
+	u8 invert_analog = 1; /* analog tuner spectrum; 0=normal, 1=inverted */
+
+	if (dev->chiptype != SI2157_CHIPTYPE_SI2157) {
+		dev_info(&client->dev, "Analog tuning not supported for chiptype=%u\n",
+			 dev->chiptype);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (!dev->active)
+		si2157_init(fe);
+
+	if (!dev->active) {
+		ret = -EAGAIN;
+		goto err;
+	}
+	if (params->mode == V4L2_TUNER_RADIO) {
+	/*
+	 * std = "fm";
+	 * bandwidth = 1700000; //best can do for FM, AGC will be a mess though
+	 * if_frequency = 1250000;  //HVR-225x(saa7164), HVR-12xx(cx23885)
+	 * if_frequency = 6600000;  //HVR-9xx(cx231xx)
+	 * if_frequency = 5500000;  //HVR-19xx(pvrusb2)
+	 */
+		dev_err(&client->dev, "si2157 does not currently support FM radio\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	tmp_lval = params->frequency * 625LL;
+	do_div(tmp_lval, 10); /* convert to HZ */
+	freq = (u32)tmp_lval;
+
+	if (freq < 1000000) /* is freq in KHz */
+		freq = freq * 1000;
+	dev->frequency = freq;
+
+	/* if_frequency values based on tda187271C2 */
+	if (params->std & (V4L2_STD_B | V4L2_STD_GH)) {
+		if (freq >= 470000000) {
+			std = "palGH";
+			bandwidth = 8000000;
+			if_frequency = 6000000;
+			system = 1;
+			if (params->std &
+			    (V4L2_STD_SECAM_G | V4L2_STD_SECAM_H)) {
+				std = "secamGH";
+				color = 0x10;
+			}
+		} else {
+			std = "palB";
+			bandwidth = 7000000;
+			if_frequency = 6000000;
+			system = 0;
+			if (params->std & V4L2_STD_SECAM_B) {
+				std = "secamB";
+				color = 0x10;
+			}
+		}
+	} else if (params->std & V4L2_STD_MN) {
+		std = "MN";
+		bandwidth = 6000000;
+		if_frequency = 5400000;
+		system = 2;
+	} else if (params->std & V4L2_STD_PAL_I) {
+		std = "palI";
+		bandwidth = 8000000;
+		if_frequency = 7250000; /* TODO: does not work yet */
+		system = 4;
+	} else if (params->std & V4L2_STD_DK) {
+		std = "palDK";
+		bandwidth = 8000000;
+		if_frequency = 6900000; /* TODO: does not work yet */
+		system = 5;
+		if (params->std & V4L2_STD_SECAM_DK) {
+			std = "secamDK";
+			color = 0x10;
+		}
+	} else if (params->std & V4L2_STD_SECAM_L) {
+		std = "secamL";
+		bandwidth = 8000000;
+		if_frequency = 6750000; /* TODO: untested */
+		system = 6;
+		color = 0x10;
+	} else if (params->std & V4L2_STD_SECAM_LC) {
+		std = "secamL'";
+		bandwidth = 7000000;
+		if_frequency = 1250000; /* TODO: untested */
+		system = 7;
+		color = 0x10;
+	} else {
+		std = "unknown";
+	}
+	/* calc channel center freq */
+	freq = freq - 1250000 + (bandwidth / 2);
+
+	dev_dbg(&client->dev,
+		"mode=%d system=%u std='%s' params->frequency=%u center freq=%u if=%u bandwidth=%u\n",
+		params->mode, system, std, params->frequency,
+		freq, if_frequency, bandwidth);
+
+	/* set analog IF port */
+	memcpy(cmd.args, "\x14\x00\x03\x06\x08\x02", 6);
+	/* in using dev->if_port, we assume analog and digital IF's */
+	/*   are always on different ports */
+	/* assumes if_port definition is 0 or 1 for digital out */
+	cmd.args[4] = (dev->if_port == 1) ? 8 : 10;
+	/* Analog AGC assumed external */
+	cmd.args[5] = (dev->if_port == 1) ? 2 : 1;
+	cmd.wlen = 6;
+	cmd.rlen = 4;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	/* set analog IF output config */
+	memcpy(cmd.args, "\x14\x00\x0d\x06\x94\x64", 6);
+	cmd.wlen = 6;
+	cmd.rlen = 4;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	/* make this distinct from a digital IF */
+	dev->if_frequency = if_frequency | 1;
+
+	/* calc and set tuner analog if center frequency */
+	if_frequency = if_frequency + 1250000 - (bandwidth / 2);
+	dev_dbg(&client->dev, "IF Ctr freq=%d\n", if_frequency);
+
+	memcpy(cmd.args, "\x14\x00\x0C\x06", 4);
+	cmd.args[4] = (if_frequency / 1000) & 0xff;
+	cmd.args[5] = ((if_frequency / 1000) >> 8) & 0xff;
+	cmd.wlen = 6;
+	cmd.rlen = 4;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	/* set analog AGC config */
+	memcpy(cmd.args, "\x14\x00\x07\x06\x32\xc8", 6);
+	cmd.wlen = 6;
+	cmd.rlen = 4;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	/* set analog video mode */
+	memcpy(cmd.args, "\x14\x00\x04\x06\x00\x00", 6);
+	cmd.args[4] = system | color;
+	/* can use dev->inversion if assumed applies to both digital/analog */
+	if (invert_analog)
+		cmd.args[5] |= 0x02;
+	cmd.wlen = 6;
+	cmd.rlen = 1;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	/* set analog frequency */
+	memcpy(cmd.args, "\x41\x01\x00\x00\x00\x00\x00\x00", 8);
+	cmd.args[4] = (freq >>  0) & 0xff;
+	cmd.args[5] = (freq >>  8) & 0xff;
+	cmd.args[6] = (freq >> 16) & 0xff;
+	cmd.args[7] = (freq >> 24) & 0xff;
+	cmd.wlen = 8;
+	cmd.rlen = 1;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	dev->bandwidth = bandwidth;
+
+	si2157_tune_wait(client, 0); /* wait to complete, ignore any errors */
+
+	return 0;
+err:
+	dev->bandwidth = 0;
+	dev->frequency = 0;
+	dev->if_frequency = 0;
+	dev_dbg(&client->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int si2157_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct i2c_client *client = fe->tuner_priv;
+	struct si2157_dev *dev = i2c_get_clientdata(client);
+
+	*frequency = dev->frequency;
+	dev_dbg(&client->dev, "freq=%u\n", dev->frequency);
+	return 0;
+}
+
+static int si2157_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+	struct i2c_client *client = fe->tuner_priv;
+	struct si2157_dev *dev = i2c_get_clientdata(client);
+
+	*bandwidth = dev->bandwidth;
+	dev_dbg(&client->dev, "bandwidth=%u\n", dev->bandwidth);
+	return 0;
+}
+
 static int si2157_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
 {
 	struct i2c_client *client = fe->tuner_priv;
 	struct si2157_dev *dev = i2c_get_clientdata(client);
 
-	*frequency = dev->if_frequency;
+	*frequency = dev->if_frequency & ~1; /* strip analog IF indicator bit */
+	dev_dbg(&client->dev, "if_frequency=%u\n", *frequency);
 	return 0;
 }
 
+static int si2157_get_rf_strength(struct dvb_frontend *fe, u16 *rssi)
+{
+	struct i2c_client *client = fe->tuner_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct si2157_cmd cmd;
+	int ret;
+	int strength;
+
+	dev_dbg(&client->dev, "\n");
+
+	memcpy(cmd.args, "\x42\x00", 2);
+	cmd.wlen = 2;
+	cmd.rlen = 12;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+	c->strength.stat[0].svalue = (s8)cmd.args[3] * 1000;
+
+	/* normalize values based on Silicon Labs reference
+	 * add 100, then anything > 80 is 100% signal
+	 */
+	strength = (s8)cmd.args[3] + 100;
+	strength = clamp_val(strength, 0, 80);
+	*rssi = (u16)(strength * 0xffff / 80);
+
+	dev_dbg(&client->dev, "strength=%d rssi=%u\n",
+		(s8)cmd.args[3], *rssi);
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed=%d\n", ret);
+	return ret;
+}
+
 static const struct dvb_tuner_ops si2157_ops = {
 	.info = {
 		.name             = "Silicon Labs Si2141/Si2146/2147/2148/2157/2158",
@@ -395,7 +775,12 @@ static const struct dvb_tuner_ops si2157_ops = {
 	.init = si2157_init,
 	.sleep = si2157_sleep,
 	.set_params = si2157_set_params,
-	.get_if_frequency = si2157_get_if_frequency,
+	.set_analog_params = si2157_set_analog_params,
+	.get_frequency     = si2157_get_frequency,
+	.get_bandwidth     = si2157_get_bandwidth,
+	.get_if_frequency  = si2157_get_if_frequency,
+
+	.get_rf_strength   = si2157_get_rf_strength,
 };
 
 static void si2157_stat_work(struct work_struct *work)
@@ -456,7 +841,7 @@ static int si2157_probe(struct i2c_client *client,
 	cmd.wlen = 0;
 	cmd.rlen = 1;
 	ret = si2157_cmd_execute(client, &cmd);
-	if (ret)
+	if (ret && ret != -EAGAIN)
 		goto err_kfree;
 
 	memcpy(&fe->ops.tuner_ops, &si2157_ops, sizeof(struct dvb_tuner_ops));
diff --git a/drivers/media/tuners/si2157_priv.h b/drivers/media/tuners/si2157_priv.h
index 778f81b39996..ef4796098931 100644
--- a/drivers/media/tuners/si2157_priv.h
+++ b/drivers/media/tuners/si2157_priv.h
@@ -29,6 +29,8 @@ struct si2157_dev {
 	u8 chiptype;
 	u8 if_port;
 	u32 if_frequency;
+	u32 bandwidth;
+	u32 frequency;
 	struct delayed_work stat_work;
 
 #if defined(CONFIG_MEDIA_CONTROLLER)
diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig
index e678d3d11467..00feadb217d8 100644
--- a/drivers/media/usb/Kconfig
+++ b/drivers/media/usb/Kconfig
@@ -1,4 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+# This Kconfig option is also used by the legacy av7110 driver
+config TTPCI_EEPROM
+	tristate
+	depends on I2C
+
 if USB && MEDIA_SUPPORT
 
 menuconfig MEDIA_USB_SUPPORT
@@ -60,11 +66,5 @@ source "drivers/media/usb/hackrf/Kconfig"
 source "drivers/media/usb/msi2500/Kconfig"
 endif
 
-if MEDIA_CEC_SUPPORT
-	comment "USB HDMI CEC adapters"
-source "drivers/media/usb/pulse8-cec/Kconfig"
-source "drivers/media/usb/rainshadow-cec/Kconfig"
-endif
-
 endif #MEDIA_USB_SUPPORT
 endif #USB
diff --git a/drivers/media/usb/Makefile b/drivers/media/usb/Makefile
index 169aa07c97bd..3eaff3149ef4 100644
--- a/drivers/media/usb/Makefile
+++ b/drivers/media/usb/Makefile
@@ -24,5 +24,3 @@ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
 obj-$(CONFIG_VIDEO_USBTV) += usbtv/
 obj-$(CONFIG_VIDEO_GO7007) += go7007/
 obj-$(CONFIG_DVB_AS102) += as102/
-obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec/
-obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec/
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index 0974965e848f..d6117093491b 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -587,14 +587,27 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
 				return status;
 			}
 		}
-		if (dev->tuner_type == TUNER_NXP_TDA18271)
+		switch (dev->model) { /* i2c device tuners */
+		case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+		case CX231XX_BOARD_HAUPPAUGE_935C:
+		case CX231XX_BOARD_HAUPPAUGE_955Q:
+		case CX231XX_BOARD_HAUPPAUGE_975:
+		case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
 			status = cx231xx_set_decoder_video_input(dev,
 							CX231XX_VMUX_TELEVISION,
 							INPUT(input)->vmux);
-		else
-			status = cx231xx_set_decoder_video_input(dev,
+			break;
+		default:
+			if (dev->tuner_type == TUNER_NXP_TDA18271)
+				status = cx231xx_set_decoder_video_input(dev,
+							CX231XX_VMUX_TELEVISION,
+							INPUT(input)->vmux);
+			else
+				status = cx231xx_set_decoder_video_input(dev,
 							CX231XX_VMUX_COMPOSITE1,
 							INPUT(input)->vmux);
+			break;
+		};
 
 		break;
 	default:
@@ -1193,12 +1206,22 @@ int cx231xx_set_audio_decoder_input(struct cx231xx *dev,
 					cx231xx_set_field(FLD_SIF_EN, 0));
 			break;
 		default:
+			switch (dev->model) { /* i2c device tuners */
+			case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+			case CX231XX_BOARD_HAUPPAUGE_935C:
+			case CX231XX_BOARD_HAUPPAUGE_955Q:
+			case CX231XX_BOARD_HAUPPAUGE_975:
+			case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
+			/* TODO: Normal mode: SIF passthrough at 14.32 MHz?? */
+				break;
+			default:
 			/* This is just a casual suggestion to people adding
 			   new boards in case they use a tuner type we don't
 			   currently know about */
-			dev_info(dev->dev,
-				 "Unknown tuner type configuring SIF");
-			break;
+				dev_info(dev->dev,
+					 "Unknown tuner type configuring SIF");
+				break;
+			}
 		}
 		break;
 
diff --git a/drivers/media/usb/cx231xx/cx231xx-input.c b/drivers/media/usb/cx231xx/cx231xx-input.c
index 9f88c640ec2b..8149702bcf89 100644
--- a/drivers/media/usb/cx231xx/cx231xx-input.c
+++ b/drivers/media/usb/cx231xx/cx231xx-input.c
@@ -88,7 +88,7 @@ int cx231xx_ir_init(struct cx231xx *dev)
 	ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master;
 	dev_dbg(dev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n",
 		ir_i2c_bus, info.addr);
-	dev->ir_i2c_client = i2c_new_device(
+	dev->ir_i2c_client = i2c_new_client_device(
 		cx231xx_get_i2c_adap(dev, ir_i2c_bus), &info);
 
 	return 0;
@@ -96,7 +96,6 @@ int cx231xx_ir_init(struct cx231xx *dev)
 
 void cx231xx_ir_exit(struct cx231xx *dev)
 {
-	if (dev->ir_i2c_client)
-		i2c_unregister_device(dev->ir_i2c_client);
+	i2c_unregister_device(dev->ir_i2c_client);
 	dev->ir_i2c_client = NULL;
 }
diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c
index 8bff7d8a0310..d9f953f2d088 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -1129,7 +1129,7 @@ int cx231xx_s_frequency(struct file *file, void *priv,
 {
 	struct cx231xx *dev = video_drvdata(file);
 	struct v4l2_frequency new_freq = *f;
-	int rc;
+	int rc, need_if_freq = 0;
 	u32 if_frequency = 5400000;
 
 	dev_dbg(dev->dev,
@@ -1142,14 +1142,30 @@ int cx231xx_s_frequency(struct file *file, void *priv,
 	/* set pre channel change settings in DIF first */
 	rc = cx231xx_tuner_pre_channel_change(dev);
 
-	call_all(dev, tuner, s_frequency, f);
-	call_all(dev, tuner, g_frequency, &new_freq);
-	dev->ctl_freq = new_freq.frequency;
+	switch (dev->model) { /* i2c device tuners */
+	case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+	case CX231XX_BOARD_HAUPPAUGE_935C:
+	case CX231XX_BOARD_HAUPPAUGE_955Q:
+	case CX231XX_BOARD_HAUPPAUGE_975:
+	case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
+		if (dev->cx231xx_set_analog_freq)
+			dev->cx231xx_set_analog_freq(dev, f->frequency);
+		dev->ctl_freq = f->frequency;
+		need_if_freq = 1;
+		break;
+	default:
+		call_all(dev, tuner, s_frequency, f);
+		call_all(dev, tuner, g_frequency, &new_freq);
+		dev->ctl_freq = new_freq.frequency;
+		break;
+	}
+
+	pr_debug("%s() %u  :  %u\n", __func__, f->frequency, dev->ctl_freq);
 
 	/* set post channel change settings in DIF first */
 	rc = cx231xx_tuner_post_channel_change(dev);
 
-	if (dev->tuner_type == TUNER_NXP_TDA18271) {
+	if (need_if_freq || dev->tuner_type == TUNER_NXP_TDA18271) {
 		if (dev->norm & (V4L2_STD_MN | V4L2_STD_NTSC_443))
 			if_frequency = 5400000;  /*5.4MHz	*/
 		else if (dev->norm & V4L2_STD_B)
@@ -1362,9 +1378,20 @@ int cx231xx_querycap(struct file *file, void *priv,
 		V4L2_CAP_STREAMING | V4L2_CAP_DEVICE_CAPS;
 	if (video_is_registered(&dev->radio_dev))
 		cap->capabilities |= V4L2_CAP_RADIO;
-	if (dev->tuner_type != TUNER_ABSENT)
-		cap->capabilities |= V4L2_CAP_TUNER;
 
+	switch (dev->model) {
+	case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+	case CX231XX_BOARD_HAUPPAUGE_935C:
+	case CX231XX_BOARD_HAUPPAUGE_955Q:
+	case CX231XX_BOARD_HAUPPAUGE_975:
+	case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
+		cap->capabilities |= V4L2_CAP_TUNER;
+		break;
+	default:
+		if (dev->tuner_type != TUNER_ABSENT)
+			cap->capabilities |= V4L2_CAP_TUNER;
+		break;
+	}
 	return 0;
 }
 
@@ -1708,10 +1735,20 @@ static void cx231xx_vdev_init(struct cx231xx *dev,
 
 	video_set_drvdata(vfd, dev);
 	if (dev->tuner_type == TUNER_ABSENT) {
-		v4l2_disable_ioctl(vfd, VIDIOC_G_FREQUENCY);
-		v4l2_disable_ioctl(vfd, VIDIOC_S_FREQUENCY);
-		v4l2_disable_ioctl(vfd, VIDIOC_G_TUNER);
-		v4l2_disable_ioctl(vfd, VIDIOC_S_TUNER);
+		switch (dev->model) {
+		case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+		case CX231XX_BOARD_HAUPPAUGE_935C:
+		case CX231XX_BOARD_HAUPPAUGE_955Q:
+		case CX231XX_BOARD_HAUPPAUGE_975:
+		case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
+			break;
+		default:
+			v4l2_disable_ioctl(vfd, VIDIOC_G_FREQUENCY);
+			v4l2_disable_ioctl(vfd, VIDIOC_S_FREQUENCY);
+			v4l2_disable_ioctl(vfd, VIDIOC_G_TUNER);
+			v4l2_disable_ioctl(vfd, VIDIOC_S_TUNER);
+			break;
+		}
 	}
 }
 
@@ -1781,8 +1818,20 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
 	dev->vdev.queue = q;
 	dev->vdev.device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
 				V4L2_CAP_VIDEO_CAPTURE;
-	if (dev->tuner_type != TUNER_ABSENT)
+
+	switch (dev->model) { /* i2c device tuners */
+	case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+	case CX231XX_BOARD_HAUPPAUGE_935C:
+	case CX231XX_BOARD_HAUPPAUGE_955Q:
+	case CX231XX_BOARD_HAUPPAUGE_975:
+	case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
 		dev->vdev.device_caps |= V4L2_CAP_TUNER;
+		break;
+	default:
+		if (dev->tuner_type != TUNER_ABSENT)
+			dev->vdev.device_caps |= V4L2_CAP_TUNER;
+		break;
+	}
 
 	/* register v4l2 video video_device */
 	ret = video_register_device(&dev->vdev, VFL_TYPE_VIDEO,
@@ -1829,8 +1878,18 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
 	dev->vbi_dev.queue = q;
 	dev->vbi_dev.device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
 				   V4L2_CAP_VBI_CAPTURE;
-	if (dev->tuner_type != TUNER_ABSENT)
+	switch (dev->model) { /* i2c device tuners */
+	case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
+	case CX231XX_BOARD_HAUPPAUGE_935C:
+	case CX231XX_BOARD_HAUPPAUGE_955Q:
+	case CX231XX_BOARD_HAUPPAUGE_975:
+	case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
 		dev->vbi_dev.device_caps |= V4L2_CAP_TUNER;
+		break;
+	default:
+		if (dev->tuner_type != TUNER_ABSENT)
+			dev->vbi_dev.device_caps |= V4L2_CAP_TUNER;
+	}
 
 	/* register v4l2 vbi video_device */
 	ret = video_register_device(&dev->vbi_dev, VFL_TYPE_VBI,
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index b21a4d413872..5c75303fba9d 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -7,7 +7,7 @@ config DVB_USB_V2
 	  USB1.1 and USB2.0 DVB devices.
 
 	  Almost every USB device needs a firmware, please look into
-	  <file:Documentation/media/dvb-drivers/dvb-usb.rst>.
+	  <file:Documentation/driver-api/media/drivers/dvb-usb.rst>.
 
 	  For a complete list of supported USB devices see the LinuxTV DVB Wiki:
 	  <https://linuxtv.org/wiki/index.php/DVB_USB>
@@ -38,7 +38,7 @@ config DVB_USB_AF9035
 	select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT
-	select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_V4L2)
 	select MEDIA_TUNER_IT913X if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Afatech AF9035 based DVB USB receiver.
@@ -137,12 +137,12 @@ config DVB_USB_RTL28XXU
 	select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_RTL2830
 	select DVB_RTL2832
-	select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT)
+	select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT && VIDEO_V4L2)
 	select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
-	select MEDIA_TUNER_E4000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_E4000 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_V4L2)
 	select MEDIA_TUNER_FC0012 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_FC0013 if MEDIA_SUBDRV_AUTOSELECT
-	select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_V4L2)
 	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/usb/dvb-usb-v2/ec168.c b/drivers/media/usb/dvb-usb-v2/ec168.c
index e30305876840..7ed0ab9e429b 100644
--- a/drivers/media/usb/dvb-usb-v2/ec168.c
+++ b/drivers/media/usb/dvb-usb-v2/ec168.c
@@ -332,22 +332,17 @@ static const struct dvb_usb_device_properties ec168_props = {
 	},
 };
 
-static const struct dvb_usb_driver_info ec168_driver_info = {
-	.name = "E3C EC168 reference design",
-	.props = &ec168_props,
-};
-
 static const struct usb_device_id ec168_id[] = {
-	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168),
-		.driver_info = (kernel_ulong_t) &ec168_driver_info },
-	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2),
-		.driver_info = (kernel_ulong_t) &ec168_driver_info },
-	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3),
-		.driver_info = (kernel_ulong_t) &ec168_driver_info },
-	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4),
-		.driver_info = (kernel_ulong_t) &ec168_driver_info },
-	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5),
-		.driver_info = (kernel_ulong_t) &ec168_driver_info },
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, ec168_id);
diff --git a/drivers/media/usb/dvb-usb-v2/gl861.c b/drivers/media/usb/dvb-usb-v2/gl861.c
index 19217dcf20f1..b7ca236174f3 100644
--- a/drivers/media/usb/dvb-usb-v2/gl861.c
+++ b/drivers/media/usb/dvb-usb-v2/gl861.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* DVB USB compliant linux driver for GL861 USB2.0 devices.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include <linux/string.h>
 
@@ -550,7 +550,7 @@ static struct dvb_usb_device_properties friio_props = {
 static const struct usb_device_id gl861_id_table[] = {
 	{ DVB_USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580_55801,
 		&gl861_props, "MSI Mega Sky 55801 DVB-T USB2.0", NULL) },
-	{ DVB_USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU,
+	{ DVB_USB_DEVICE(USB_VID_ALINK, USB_PID_ALINK_DTU,
 		&gl861_props, "A-LINK DTU DVB-T USB2.0", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE,
 		&friio_props, "774 Friio White ISDB-T USB2.0", NULL) },
diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c
index fd8b42bb9a84..8a3c0eeed959 100644
--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c
@@ -22,7 +22,7 @@
  *
  * LME2510C + M88RS2000
  *
- * For firmware see Documentation/media/dvb-drivers/lmedm04.rst
+ * For firmware see Documentation/admin-guide/media/lmedm04.rst
  *
  * I2C addresses:
  * 0xd0 - STV0288	- Demodulator
@@ -39,7 +39,7 @@
  * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
  * LME2510(C)(C) Leaguerme (Shenzhen) MicroElectronics Co., Ltd.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  *
  * Known Issues :
  *	LME2510: Non Intel USB chipsets fail to maintain High Speed on
diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.h b/drivers/media/usb/dvb-usb-v2/lmedm04.h
index 766a8348624d..4335b6ebcc1c 100644
--- a/drivers/media/usb/dvb-usb-v2/lmedm04.h
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.h
@@ -14,7 +14,7 @@
  * MVB0001F (LME2510C+LGTDQT-P001F)
  *
  * *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #ifndef _DVB_USB_LME2510_H_
 #define _DVB_USB_LME2510_H_
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
index 55b4ae7037a4..7865fa0a8295 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -2,7 +2,7 @@
 /*
  * Copyright (C) 2010-2014 Michael Krufky (mkrufky@linuxtv.org)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 
 #include <linux/vmalloc.h>
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.h b/drivers/media/usb/dvb-usb-v2/mxl111sf.h
index 70bd2a2a8ec1..e57e5d2353b4 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.h
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.h
@@ -2,7 +2,7 @@
 /*
  * Copyright (C) 2010-2014 Michael Krufky (mkrufky@linuxtv.org)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 
 #ifndef _DVB_USB_MXL111SF_H_
diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig
index 1a3e5f965ae4..15d29c91662f 100644
--- a/drivers/media/usb/dvb-usb/Kconfig
+++ b/drivers/media/usb/dvb-usb/Kconfig
@@ -2,12 +2,13 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
 	depends on DVB_CORE && USB && I2C && RC_CORE
+	select CYPRESS_FIRMWARE
 	help
 	  By enabling this you will be able to choose the various supported
 	  USB1.1 and USB2.0 DVB devices.
 
 	  Almost every USB device needs a firmware, please look into
-	  <file:Documentation/media/dvb-drivers/dvb-usb.rst>.
+	  <file:Documentation/driver-api/media/drivers/dvb-usb.rst>.
 
 	  For a complete list of supported USB devices see the LinuxTV DVB Wiki:
 	  <https://linuxtv.org/wiki/index.php/DVB_USB>
diff --git a/drivers/media/usb/dvb-usb/a800.c b/drivers/media/usb/dvb-usb/a800.c
index 666213f5d5d8..36b5b6227412 100644
--- a/drivers/media/usb/dvb-usb/a800.c
+++ b/drivers/media/usb/dvb-usb/a800.c
@@ -8,7 +8,7 @@
  *   - AVerMedia who kindly provided information and
  *   - Glen Harris who suffered from my mistakes during development.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "dibusb.h"
 
@@ -27,8 +27,10 @@ static int a800_power_ctrl(struct dvb_usb_device *d, int onoff)
 }
 
 /* assure to put cold to 0 for iManufacturer == 1 */
-static int a800_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
-	struct dvb_usb_device_description **desc, int *cold)
+static int a800_identify_state(struct usb_device *udev,
+			       const struct dvb_usb_device_properties *props,
+			       const struct dvb_usb_device_description **desc,
+			       int *cold)
 {
 	*cold = udev->descriptor.iManufacturer != 1;
 	return 0;
diff --git a/drivers/media/usb/dvb-usb/af9005-fe.c b/drivers/media/usb/dvb-usb/af9005-fe.c
index 6c960f723457..9d6fa0556d7b 100644
--- a/drivers/media/usb/dvb-usb/af9005-fe.c
+++ b/drivers/media/usb/dvb-usb/af9005-fe.c
@@ -6,7 +6,7 @@
  *
  * Thanks to Afatech who kindly provided information.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "af9005.h"
 #include "af9005-script.h"
diff --git a/drivers/media/usb/dvb-usb/af9005-remote.c b/drivers/media/usb/dvb-usb/af9005-remote.c
index c664353f3911..41d48b3c8d05 100644
--- a/drivers/media/usb/dvb-usb/af9005-remote.c
+++ b/drivers/media/usb/dvb-usb/af9005-remote.c
@@ -8,7 +8,7 @@
  *
  * Thanks to Afatech who kindly provided information.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "af9005.h"
 /* debug */
diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c
index 89b4b5d84cdf..b6a2436d16e9 100644
--- a/drivers/media/usb/dvb-usb/af9005.c
+++ b/drivers/media/usb/dvb-usb/af9005.c
@@ -6,7 +6,7 @@
  *
  * Thanks to Afatech who kindly provided information.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "af9005.h"
 
@@ -955,8 +955,8 @@ static int af9005_pid_filter(struct dvb_usb_adapter *adap, int index,
 }
 
 static int af9005_identify_state(struct usb_device *udev,
-				 struct dvb_usb_device_properties *props,
-				 struct dvb_usb_device_description **desc,
+				 const struct dvb_usb_device_properties *props,
+				 const struct dvb_usb_device_description **desc,
 				 int *cold)
 {
 	int ret;
diff --git a/drivers/media/usb/dvb-usb/af9005.h b/drivers/media/usb/dvb-usb/af9005.h
index 3179a7c71e8f..11d74dc26d83 100644
--- a/drivers/media/usb/dvb-usb/af9005.h
+++ b/drivers/media/usb/dvb-usb/af9005.h
@@ -6,7 +6,7 @@
  *
  * Thanks to Afatech who kindly provided information.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #ifndef _DVB_USB_AF9005_H_
 #define _DVB_USB_AF9005_H_
diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c
index 8de18da0c4bd..1c39b61cde29 100644
--- a/drivers/media/usb/dvb-usb/az6027.c
+++ b/drivers/media/usb/dvb-usb/az6027.c
@@ -4,7 +4,7 @@
  *
  * Copyright (C) 2009 Adams.Xu <adams.xu@azwave.com.cn>
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "az6027.h"
 
@@ -1051,8 +1051,8 @@ static struct i2c_algorithm az6027_i2c_algo = {
 };
 
 static int az6027_identify_state(struct usb_device *udev,
-				 struct dvb_usb_device_properties *props,
-				 struct dvb_usb_device_description **desc,
+				 const struct dvb_usb_device_properties *props,
+				 const struct dvb_usb_device_description **desc,
 				 int *cold)
 {
 	u8 *b;
diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
index c421b603be44..761992ad05e2 100644
--- a/drivers/media/usb/dvb-usb/cxusb.c
+++ b/drivers/media/usb/dvb-usb/cxusb.c
@@ -18,7 +18,7 @@
  * Copyright (C) 2006, 2007 Chris Pascoe (c.pascoe@itee.uq.edu.au)
  * Copyright (C) 2011, 2017 Maciej S. Szmigiero (mail@maciej.szmigiero.name)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include <media/tuner.h>
 #include <linux/delay.h>
@@ -1358,8 +1358,8 @@ static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap)
  * not, and forget a match if it turns out we selected the wrong device.
  */
 static int bluebird_fx2_identify_state(struct usb_device *udev,
-				       struct dvb_usb_device_properties *props,
-				       struct dvb_usb_device_description **desc,
+				       const struct dvb_usb_device_properties *props,
+				       const struct dvb_usb_device_description **desc,
 				       int *cold)
 {
 	int wascold = *cold;
diff --git a/drivers/media/usb/dvb-usb/dib0700.h b/drivers/media/usb/dvb-usb/dib0700.h
index ca4d3d2da969..2defbd8b6fc1 100644
--- a/drivers/media/usb/dvb-usb/dib0700.h
+++ b/drivers/media/usb/dvb-usb/dib0700.h
@@ -52,20 +52,25 @@ struct dib0700_state {
 	struct i2c_client *i2c_client_tuner;
 };
 
-extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
-			       u32 *romversion, u32 *ramversion, u32 *fwtype);
-extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
-extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
-extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
-extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
-extern int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf);
-extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
-extern struct i2c_algorithm dib0700_i2c_algo;
-extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
-			struct dvb_usb_device_description **desc, int *cold);
-extern int dib0700_change_protocol(struct rc_dev *dev, u64 *rc_proto);
-extern int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz);
+int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+			u32 *romversion, u32 *ramversion, u32 *fwtype);
+int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio,
+		     u8 gpio_dir, u8 gpio_val);
+int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
+int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx,
+		    u8 rxlen);
+int dib0700_download_firmware(struct usb_device *d,
+			      const struct firmware *fw);
+int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf);
+int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
+int dib0700_identify_state(struct usb_device *d,
+			   const struct dvb_usb_device_properties *props,
+			   const struct dvb_usb_device_description **desc,
+			   int *cold);
+int dib0700_change_protocol(struct rc_dev *dev, u64 *rc_proto);
+int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz);
 
+extern struct i2c_algorithm dib0700_i2c_algo;
 extern int dib0700_device_count;
 extern int dvb_usb_dib0700_ir_proto;
 extern struct dvb_usb_device_properties dib0700_devices[];
diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c
index ef62dd6c5ae4..70219b3e8566 100644
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -372,8 +372,10 @@ struct i2c_algorithm dib0700_i2c_algo = {
 	.functionality = dib0700_i2c_func,
 };
 
-int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
-			struct dvb_usb_device_description **desc, int *cold)
+int dib0700_identify_state(struct usb_device *udev,
+			   const struct dvb_usb_device_properties *props,
+			   const struct dvb_usb_device_description **desc,
+			   int *cold)
 {
 	s16 ret;
 	u8 *b;
diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c
index 59ce2dec11e9..02b51d1a1b67 100644
--- a/drivers/media/usb/dvb-usb/dibusb-common.c
+++ b/drivers/media/usb/dvb-usb/dibusb-common.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 
 #include "dibusb.h"
diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c
index d4ea72bf09c5..e9dc27f73970 100644
--- a/drivers/media/usb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/usb/dvb-usb/dibusb-mb.c
@@ -7,7 +7,7 @@
  * based on GPL code from DiBcom, which has
  * Copyright (C) 2004 Amaury Demol for DiBcom
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "dibusb.h"
 
@@ -81,7 +81,7 @@ static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap)
 
 	if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) {
 		err("tuner i2c write failed.");
-		ret = -EREMOTEIO;
+		return -EREMOTEIO;
 	}
 
 	if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
diff --git a/drivers/media/usb/dvb-usb/dibusb-mc-common.c b/drivers/media/usb/dvb-usb/dibusb-mc-common.c
index 967027e29c17..b8cde4cded33 100644
--- a/drivers/media/usb/dvb-usb/dibusb-mc-common.c
+++ b/drivers/media/usb/dvb-usb/dibusb-mc-common.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 
 #include "dibusb.h"
diff --git a/drivers/media/usb/dvb-usb/dibusb-mc.c b/drivers/media/usb/dvb-usb/dibusb-mc.c
index ada3bee296c2..e2689977c8c8 100644
--- a/drivers/media/usb/dvb-usb/dibusb-mc.c
+++ b/drivers/media/usb/dvb-usb/dibusb-mc.c
@@ -7,7 +7,7 @@
  * based on GPL code from DiBcom, which has
  * Copyright (C) 2004 Amaury Demol for DiBcom
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "dibusb.h"
 
diff --git a/drivers/media/usb/dvb-usb/dibusb.h b/drivers/media/usb/dvb-usb/dibusb.h
index a83326c36ca7..f61de0744821 100644
--- a/drivers/media/usb/dvb-usb/dibusb.h
+++ b/drivers/media/usb/dvb-usb/dibusb.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #ifndef _DVB_USB_DIBUSB_H_
 #define _DVB_USB_DIBUSB_H_
diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c
index 99a39339d45d..4e3b3c064bcf 100644
--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -6,7 +6,7 @@
  *
  * partly based on the SDK published by Nebula Electronics
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "digitv.h"
 
@@ -90,9 +90,10 @@ static struct i2c_algorithm digitv_i2c_algo = {
 };
 
 /* Callbacks for DVB USB */
-static int digitv_identify_state (struct usb_device *udev, struct
-		dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
-		int *cold)
+static int digitv_identify_state(struct usb_device *udev,
+				 const struct dvb_usb_device_properties *props,
+				 const struct dvb_usb_device_description **desc,
+				 int *cold)
 {
 	*cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
 	return 0;
@@ -230,14 +231,15 @@ static struct rc_map_table rc_map_digitv_table[] = {
 
 static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
+	struct rc_map_table *entry;
 	int ret, i;
-	u8 key[5];
+	u8 key[4];
 	u8 b[4] = { 0 };
 
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	ret = digitv_ctrl_msg(d, USB_READ_REMOTE, 0, NULL, 0, &key[1], 4);
+	ret = digitv_ctrl_msg(d, USB_READ_REMOTE, 0, NULL, 0, key, 4);
 	if (ret)
 		return ret;
 
@@ -248,20 +250,21 @@ static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 		return ret;
 
 	/* if something is inside the buffer, simulate key press */
-	if (key[1] != 0)
-	{
-		  for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
-			if (rc5_custom(&d->props.rc.legacy.rc_map_table[i]) == key[1] &&
-			    rc5_data(&d->props.rc.legacy.rc_map_table[i]) == key[2]) {
-				*event = d->props.rc.legacy.rc_map_table[i].keycode;
+	if (key[0] != 0) {
+		for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
+			entry = &d->props.rc.legacy.rc_map_table[i];
+
+			if (rc5_custom(entry) == key[0] &&
+			    rc5_data(entry) == key[1]) {
+				*event = entry->keycode;
 				*state = REMOTE_KEY_PRESSED;
 				return 0;
 			}
 		}
+
+		deb_rc("key: %*ph\n", 4, key);
 	}
 
-	if (key[0] != 0)
-		deb_rc("key: %*ph\n", 5, key);
 	return 0;
 }
 
diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c
index 00ce723c7bf0..9f83560ba63d 100644
--- a/drivers/media/usb/dvb-usb/dtt200u-fe.c
+++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c
@@ -4,7 +4,7 @@
  *
  * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@posteo.de>
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "dtt200u.h"
 
diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c
index 1e7296b2e5b2..24efa023d827 100644
--- a/drivers/media/usb/dvb-usb/dtt200u.c
+++ b/drivers/media/usb/dvb-usb/dtt200u.c
@@ -6,7 +6,7 @@
  *
  * Thanks to Steve Chang from WideView for providing support for the WT-220U.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "dtt200u.h"
 
diff --git a/drivers/media/usb/dvb-usb/dtt200u.h b/drivers/media/usb/dvb-usb/dtt200u.h
index 832f355114e4..696c2c1f3af3 100644
--- a/drivers/media/usb/dvb-usb/dtt200u.h
+++ b/drivers/media/usb/dvb-usb/dtt200u.h
@@ -4,7 +4,7 @@
  *
  * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #ifndef _DVB_USB_DTT200U_H_
 #define _DVB_USB_DTT200U_H_
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-common.h b/drivers/media/usb/dvb-usb/dvb-usb-common.h
index 8c51ac4493dd..70f4eedd7c48 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-common.h
+++ b/drivers/media/usb/dvb-usb/dvb-usb-common.h
@@ -26,7 +26,8 @@ extern int dvb_usb_disable_rc_polling;
 #define deb_uxfer(args...) dprintk(dvb_usb_debug,0x100,args)
 
 /* commonly used  methods */
-extern int dvb_usb_download_firmware(struct usb_device *, struct dvb_usb_device_properties *);
+int dvb_usb_download_firmware(struct usb_device *udev,
+			      const struct dvb_usb_device_properties *props);
 
 extern int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff);
 
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
index 42c207aacbb1..0fb3fa6100e4 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
@@ -84,7 +84,8 @@ int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw
 }
 EXPORT_SYMBOL(usb_cypress_load_firmware);
 
-int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_properties *props)
+int dvb_usb_download_firmware(struct usb_device *udev,
+			      const struct dvb_usb_device_properties *props)
 {
 	int ret;
 	const struct firmware *fw = NULL;
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 16a0b4a359ea..c1a7634e27b4 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -6,7 +6,7 @@
  *
  * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "dvb-usb-common.h"
 
@@ -184,10 +184,10 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
 }
 
 /* determine the name and the state of the just found USB device */
-static struct dvb_usb_device_description *dvb_usb_find_device(struct usb_device *udev, struct dvb_usb_device_properties *props, int *cold)
+static const struct dvb_usb_device_description *dvb_usb_find_device(struct usb_device *udev, const struct dvb_usb_device_properties *props, int *cold)
 {
 	int i, j;
-	struct dvb_usb_device_description *desc = NULL;
+	const struct dvb_usb_device_description *desc = NULL;
 
 	*cold = -1;
 
@@ -242,13 +242,13 @@ int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff)
  * USB
  */
 int dvb_usb_device_init(struct usb_interface *intf,
-			struct dvb_usb_device_properties *props,
+			const struct dvb_usb_device_properties *props,
 			struct module *owner, struct dvb_usb_device **du,
 			short *adapter_nums)
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct dvb_usb_device *d = NULL;
-	struct dvb_usb_device_description *desc = NULL;
+	const struct dvb_usb_device_description *desc = NULL;
 
 	int ret = -ENOMEM, cold = 0;
 
diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h
index 2eb0e24e8943..741be0e69447 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb.h
+++ b/drivers/media/usb/dvb-usb/dvb-usb.h
@@ -291,8 +291,10 @@ struct dvb_usb_device_properties {
 
 	int (*power_ctrl)       (struct dvb_usb_device *, int);
 	int (*read_mac_address) (struct dvb_usb_device *, u8 []);
-	int (*identify_state)   (struct usb_device *, struct dvb_usb_device_properties *,
-			struct dvb_usb_device_description **, int *);
+	int (*identify_state)(struct usb_device *udev,
+			      const struct dvb_usb_device_properties *props,
+			      const struct dvb_usb_device_description **desc,
+			      int *cold);
 
 	struct {
 		enum dvb_usb_mode mode;	/* Drivers shouldn't touch on it */
@@ -436,7 +438,7 @@ struct dvb_usb_adapter {
  */
 struct dvb_usb_device {
 	struct dvb_usb_device_properties props;
-	struct dvb_usb_device_description *desc;
+	const struct dvb_usb_device_description *desc;
 
 	struct usb_device *udev;
 
@@ -473,7 +475,7 @@ struct dvb_usb_device {
 };
 
 extern int dvb_usb_device_init(struct usb_interface *,
-			       struct dvb_usb_device_properties *,
+			       const struct dvb_usb_device_properties *,
 			       struct module *, struct dvb_usb_device **,
 			       short *adapter_nums);
 extern void dvb_usb_device_exit(struct usb_interface *);
diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 1007366a295b..f6d2d2398db6 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -8,7 +8,7 @@
  *	Terratec Cinergy S2 cards
  * Copyright (C) 2008-2012 Igor M. Liplianin (liplianin@me.by)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include <media/dvb-usb-ids.h>
 #include "dw2102.h"
@@ -955,8 +955,8 @@ static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 }
 
 static int su3000_identify_state(struct usb_device *udev,
-				 struct dvb_usb_device_properties *props,
-				 struct dvb_usb_device_description **desc,
+				 const struct dvb_usb_device_properties *props,
+				 const struct dvb_usb_device_description **desc,
 				 int *cold)
 {
 	info("%s", __func__);
diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c
index 1282f701f185..c07f46f5176e 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -9,7 +9,7 @@
  *
  * This module is based off the vp7045 and vp702x modules
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "gp8psk.h"
 #include "gp8psk-fe.h"
diff --git a/drivers/media/usb/dvb-usb/gp8psk.h b/drivers/media/usb/dvb-usb/gp8psk.h
index 2f4c1368eabe..5293dfdd2609 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.h
+++ b/drivers/media/usb/dvb-usb/gp8psk.h
@@ -9,7 +9,7 @@
  *
  * This module is based off the vp7045 and vp702x modules
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #ifndef _DVB_USB_GP8PSK_H_
 #define _DVB_USB_GP8PSK_H_
diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c
index d866a1990a7d..4bb5b82599a7 100644
--- a/drivers/media/usb/dvb-usb/m920x.c
+++ b/drivers/media/usb/dvb-usb/m920x.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2006 Aapo Tahkola (aet@rasterburn.org)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 
 #include "m920x.h"
@@ -459,8 +459,8 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar
 
 /* Callbacks for DVB USB */
 static int m920x_identify_state(struct usb_device *udev,
-				struct dvb_usb_device_properties *props,
-				struct dvb_usb_device_description **desc,
+				const struct dvb_usb_device_properties *props,
+				const struct dvb_usb_device_description **desc,
 				int *cold)
 {
 	struct usb_host_interface *alt;
diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c
index e368935a5089..e7b290552b66 100644
--- a/drivers/media/usb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c
@@ -4,7 +4,7 @@
  *
  * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "dibusb.h"
 
diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c
index 823b33ae828d..e8d784b9d119 100644
--- a/drivers/media/usb/dvb-usb/opera1.c
+++ b/drivers/media/usb/dvb-usb/opera1.c
@@ -4,7 +4,7 @@
 * Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org)
 * Copyright (C) 2006 Marco Gittler (g.marco@freenet.de)
 *
-* see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+* see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
 */
 
 #define DVB_USB_LOG_PREFIX "opera"
diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c
index 676d233d46d5..f172120db2aa 100644
--- a/drivers/media/usb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/usb/dvb-usb/technisat-usb2.c
@@ -330,8 +330,8 @@ static void technisat_usb2_green_led_control(struct work_struct *work)
 
 /* method to find out whether the firmware has to be downloaded or not */
 static int technisat_usb2_identify_state(struct usb_device *udev,
-		struct dvb_usb_device_properties *props,
-		struct dvb_usb_device_description **desc, int *cold)
+		const struct dvb_usb_device_properties *props,
+		const struct dvb_usb_device_description **desc, int *cold)
 {
 	int ret;
 	u8 *version;
diff --git a/drivers/media/usb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c
index e12a5466b677..294274fd8f55 100644
--- a/drivers/media/usb/dvb-usb/ttusb2.c
+++ b/drivers/media/usb/dvb-usb/ttusb2.c
@@ -17,7 +17,7 @@
  * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
  * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org>
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #define DVB_USB_LOG_PREFIX "ttusb2"
 #include "dvb-usb.h"
@@ -467,9 +467,10 @@ static int tt3650_rc_query(struct dvb_usb_device *d)
 
 
 /* Callbacks for DVB USB */
-static int ttusb2_identify_state (struct usb_device *udev, struct
-		dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
-		int *cold)
+static int ttusb2_identify_state(struct usb_device *udev,
+				 const struct dvb_usb_device_properties *props,
+				 const struct dvb_usb_device_description **desc,
+				 int *cold)
 {
 	*cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
 	return 0;
diff --git a/drivers/media/usb/dvb-usb/ttusb2.h b/drivers/media/usb/dvb-usb/ttusb2.h
index 8a3853cd6a26..b34c469d83f9 100644
--- a/drivers/media/usb/dvb-usb/ttusb2.h
+++ b/drivers/media/usb/dvb-usb/ttusb2.h
@@ -6,7 +6,7 @@
  * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
  * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.de>
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #ifndef _DVB_USB_TTUSB2_H_
 #define _DVB_USB_TTUSB2_H_
diff --git a/drivers/media/usb/dvb-usb/umt-010.c b/drivers/media/usb/dvb-usb/umt-010.c
index a2101bd43349..2181993771ae 100644
--- a/drivers/media/usb/dvb-usb/umt-010.c
+++ b/drivers/media/usb/dvb-usb/umt-010.c
@@ -4,7 +4,7 @@
  *
  * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "dibusb.h"
 
diff --git a/drivers/media/usb/dvb-usb/vp702x-fe.c b/drivers/media/usb/dvb-usb/vp702x-fe.c
index 1c75a9c9dfca..c1e7931900ee 100644
--- a/drivers/media/usb/dvb-usb/vp702x-fe.c
+++ b/drivers/media/usb/dvb-usb/vp702x-fe.c
@@ -12,7 +12,7 @@
  * This file can be removed soon, after the DST-driver is rewritten to provice
  * the frontend-controlling separately.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "vp702x.h"
 
diff --git a/drivers/media/usb/dvb-usb/vp702x.c b/drivers/media/usb/dvb-usb/vp702x.c
index 381b5c898a07..bf54747e2e01 100644
--- a/drivers/media/usb/dvb-usb/vp702x.c
+++ b/drivers/media/usb/dvb-usb/vp702x.c
@@ -9,7 +9,7 @@
  *
  * Thanks to Twinhan who kindly provided hardware and information.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "vp702x.h"
 #include <linux/mutex.h>
diff --git a/drivers/media/usb/dvb-usb/vp7045-fe.c b/drivers/media/usb/dvb-usb/vp7045-fe.c
index d253307a35f8..e99740ec2650 100644
--- a/drivers/media/usb/dvb-usb/vp7045-fe.c
+++ b/drivers/media/usb/dvb-usb/vp7045-fe.c
@@ -6,7 +6,7 @@
  *
  * Thanks to Twinhan who kindly provided hardware and information.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "vp7045.h"
 
diff --git a/drivers/media/usb/dvb-usb/vp7045.c b/drivers/media/usb/dvb-usb/vp7045.c
index 2baf57216d19..23e3a90af1f4 100644
--- a/drivers/media/usb/dvb-usb/vp7045.c
+++ b/drivers/media/usb/dvb-usb/vp7045.c
@@ -7,7 +7,7 @@
  *
  * Thanks to Twinhan who kindly provided hardware and information.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #include "vp7045.h"
 
diff --git a/drivers/media/usb/dvb-usb/vp7045.h b/drivers/media/usb/dvb-usb/vp7045.h
index 818366746c41..1c8438f22b97 100644
--- a/drivers/media/usb/dvb-usb/vp7045.h
+++ b/drivers/media/usb/dvb-usb/vp7045.h
@@ -6,7 +6,7 @@
  *
  * Thanks to Twinhan who kindly provided hardware and information.
  *
- * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
  */
 #ifndef _DVB_USB_VP7045_H_
 #define _DVB_USB_VP7045_H_
diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig
index 77a360958239..0283e3b908e4 100644
--- a/drivers/media/usb/gspca/Kconfig
+++ b/drivers/media/usb/gspca/Kconfig
@@ -9,7 +9,7 @@ menuconfig USB_GSPCA
 	  Say Y here if you want to enable selecting webcams based
 	  on the GSPCA framework.
 
-	  See <file:Documentation/media/v4l-drivers/gspca-cardlist.rst> for more info.
+	  See <file:Documentation/admin-guide/media/gspca-cardlist.rst> for more info.
 
 	  This driver uses the Video For Linux API. You must say Y or M to
 	  "Video For Linux" to use this driver.
diff --git a/drivers/media/usb/gspca/mr97310a.c b/drivers/media/usb/gspca/mr97310a.c
index 502fc2eaffe0..464aa61cd914 100644
--- a/drivers/media/usb/gspca/mr97310a.c
+++ b/drivers/media/usb/gspca/mr97310a.c
@@ -287,7 +287,6 @@ static int zero_the_pointer(struct gspca_dev *gspca_dev)
 			return err_code;
 
 		err_code = cam_get_response16(gspca_dev, 0x21, 0);
-		status = data[0];
 		tries++;
 		if (err_code < 0)
 			return err_code;
diff --git a/drivers/media/usb/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c
index b75c18a012a7..52e05a69c46e 100644
--- a/drivers/media/usb/hdpvr/hdpvr-core.c
+++ b/drivers/media/usb/hdpvr/hdpvr-core.c
@@ -363,9 +363,9 @@ static int hdpvr_probe(struct usb_interface *interface,
 	}
 
 	client = hdpvr_register_ir_i2c(dev);
-	if (!client) {
+	if (IS_ERR(client)) {
 		v4l2_err(&dev->v4l2_dev, "i2c IR device register failed\n");
-		retval = -ENODEV;
+		retval = PTR_ERR(client);
 		goto reg_fail;
 	}
 #endif
diff --git a/drivers/media/usb/hdpvr/hdpvr-i2c.c b/drivers/media/usb/hdpvr/hdpvr-i2c.c
index 785c8508a46e..070559b01b01 100644
--- a/drivers/media/usb/hdpvr/hdpvr-i2c.c
+++ b/drivers/media/usb/hdpvr/hdpvr-i2c.c
@@ -44,7 +44,7 @@ struct i2c_client *hdpvr_register_ir_i2c(struct hdpvr_device *dev)
 	init_data->polling_interval = 405; /* ms, duplicated from Windows */
 	info.platform_data = init_data;
 
-	return i2c_new_device(&dev->i2c_adapter, &info);
+	return i2c_new_client_device(&dev->i2c_adapter, &info);
 }
 
 static int hdpvr_i2c_read(struct hdpvr_device *dev, int bus,
diff --git a/drivers/media/usb/pulse8-cec/Kconfig b/drivers/media/usb/pulse8-cec/Kconfig
deleted file mode 100644
index e802d30dbbee..000000000000
--- a/drivers/media/usb/pulse8-cec/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config USB_PULSE8_CEC
-	tristate "Pulse Eight HDMI CEC"
-	depends on USB_ACM
-	select CEC_CORE
-	select SERIO
-	select SERIO_SERPORT
-	help
-	  This is a cec driver for the Pulse Eight HDMI CEC device.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pulse8-cec.
diff --git a/drivers/media/usb/pulse8-cec/Makefile b/drivers/media/usb/pulse8-cec/Makefile
deleted file mode 100644
index 7816c68bf928..000000000000
--- a/drivers/media/usb/pulse8-cec/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec.o
diff --git a/drivers/media/usb/pulse8-cec/pulse8-cec.c b/drivers/media/usb/pulse8-cec/pulse8-cec.c
deleted file mode 100644
index 0655aa9ecf28..000000000000
--- a/drivers/media/usb/pulse8-cec/pulse8-cec.c
+++ /dev/null
@@ -1,909 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Pulse Eight HDMI CEC driver
- *
- * Copyright 2016 Hans Verkuil <hverkuil@xs4all.nl
- */
-
-/*
- * Notes:
- *
- * - Devices with firmware version < 2 do not store their configuration in
- *   EEPROM.
- *
- * - In autonomous mode, only messages from a TV will be acknowledged, even
- *   polling messages. Upon receiving a message from a TV, the dongle will
- *   respond to messages from any logical address.
- *
- * - In autonomous mode, the dongle will by default reply Feature Abort
- *   [Unrecognized Opcode] when it receives Give Device Vendor ID. It will
- *   however observe vendor ID's reported by other devices and possibly
- *   alter this behavior. When TV's (and TV's only) report that their vendor ID
- *   is LG (0x00e091), the dongle will itself reply that it has the same vendor
- *   ID, and it will respond to at least one vendor specific command.
- *
- * - In autonomous mode, the dongle is known to attempt wakeup if it receives
- *   <User Control Pressed> ["Power On"], ["Power] or ["Power Toggle"], or if it
- *   receives <Set Stream Path> with its own physical address. It also does this
- *   if it receives <Vendor Specific Command> [0x03 0x00] from an LG TV.
- */
-
-#include <linux/completion.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/workqueue.h>
-#include <linux/serio.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-
-#include <media/cec.h>
-
-MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>");
-MODULE_DESCRIPTION("Pulse Eight HDMI CEC driver");
-MODULE_LICENSE("GPL");
-
-static int debug;
-static int persistent_config;
-module_param(debug, int, 0644);
-module_param(persistent_config, int, 0644);
-MODULE_PARM_DESC(debug, "debug level (0-2)");
-MODULE_PARM_DESC(persistent_config, "read config from persistent memory (0-1)");
-
-enum pulse8_msgcodes {
-	MSGCODE_NOTHING = 0,
-	MSGCODE_PING,
-	MSGCODE_TIMEOUT_ERROR,
-	MSGCODE_HIGH_ERROR,
-	MSGCODE_LOW_ERROR,
-	MSGCODE_FRAME_START,
-	MSGCODE_FRAME_DATA,
-	MSGCODE_RECEIVE_FAILED,
-	MSGCODE_COMMAND_ACCEPTED,	/* 0x08 */
-	MSGCODE_COMMAND_REJECTED,
-	MSGCODE_SET_ACK_MASK,
-	MSGCODE_TRANSMIT,
-	MSGCODE_TRANSMIT_EOM,
-	MSGCODE_TRANSMIT_IDLETIME,
-	MSGCODE_TRANSMIT_ACK_POLARITY,
-	MSGCODE_TRANSMIT_LINE_TIMEOUT,
-	MSGCODE_TRANSMIT_SUCCEEDED,	/* 0x10 */
-	MSGCODE_TRANSMIT_FAILED_LINE,
-	MSGCODE_TRANSMIT_FAILED_ACK,
-	MSGCODE_TRANSMIT_FAILED_TIMEOUT_DATA,
-	MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE,
-	MSGCODE_FIRMWARE_VERSION,
-	MSGCODE_START_BOOTLOADER,
-	MSGCODE_GET_BUILDDATE,
-	MSGCODE_SET_CONTROLLED,		/* 0x18 */
-	MSGCODE_GET_AUTO_ENABLED,
-	MSGCODE_SET_AUTO_ENABLED,
-	MSGCODE_GET_DEFAULT_LOGICAL_ADDRESS,
-	MSGCODE_SET_DEFAULT_LOGICAL_ADDRESS,
-	MSGCODE_GET_LOGICAL_ADDRESS_MASK,
-	MSGCODE_SET_LOGICAL_ADDRESS_MASK,
-	MSGCODE_GET_PHYSICAL_ADDRESS,
-	MSGCODE_SET_PHYSICAL_ADDRESS,	/* 0x20 */
-	MSGCODE_GET_DEVICE_TYPE,
-	MSGCODE_SET_DEVICE_TYPE,
-	MSGCODE_GET_HDMI_VERSION,
-	MSGCODE_SET_HDMI_VERSION,
-	MSGCODE_GET_OSD_NAME,
-	MSGCODE_SET_OSD_NAME,
-	MSGCODE_WRITE_EEPROM,
-	MSGCODE_GET_ADAPTER_TYPE,	/* 0x28 */
-	MSGCODE_SET_ACTIVE_SOURCE,
-
-	MSGCODE_FRAME_EOM = 0x80,
-	MSGCODE_FRAME_ACK = 0x40,
-};
-
-static const char * const pulse8_msgnames[] = {
-	"NOTHING",
-	"PING",
-	"TIMEOUT_ERROR",
-	"HIGH_ERROR",
-	"LOW_ERROR",
-	"FRAME_START",
-	"FRAME_DATA",
-	"RECEIVE_FAILED",
-	"COMMAND_ACCEPTED",
-	"COMMAND_REJECTED",
-	"SET_ACK_MASK",
-	"TRANSMIT",
-	"TRANSMIT_EOM",
-	"TRANSMIT_IDLETIME",
-	"TRANSMIT_ACK_POLARITY",
-	"TRANSMIT_LINE_TIMEOUT",
-	"TRANSMIT_SUCCEEDED",
-	"TRANSMIT_FAILED_LINE",
-	"TRANSMIT_FAILED_ACK",
-	"TRANSMIT_FAILED_TIMEOUT_DATA",
-	"TRANSMIT_FAILED_TIMEOUT_LINE",
-	"FIRMWARE_VERSION",
-	"START_BOOTLOADER",
-	"GET_BUILDDATE",
-	"SET_CONTROLLED",
-	"GET_AUTO_ENABLED",
-	"SET_AUTO_ENABLED",
-	"GET_DEFAULT_LOGICAL_ADDRESS",
-	"SET_DEFAULT_LOGICAL_ADDRESS",
-	"GET_LOGICAL_ADDRESS_MASK",
-	"SET_LOGICAL_ADDRESS_MASK",
-	"GET_PHYSICAL_ADDRESS",
-	"SET_PHYSICAL_ADDRESS",
-	"GET_DEVICE_TYPE",
-	"SET_DEVICE_TYPE",
-	"GET_HDMI_VERSION",
-	"SET_HDMI_VERSION",
-	"GET_OSD_NAME",
-	"SET_OSD_NAME",
-	"WRITE_EEPROM",
-	"GET_ADAPTER_TYPE",
-	"SET_ACTIVE_SOURCE",
-};
-
-static const char *pulse8_msgname(u8 cmd)
-{
-	static char unknown_msg[5];
-
-	if ((cmd & 0x3f) < ARRAY_SIZE(pulse8_msgnames))
-		return pulse8_msgnames[cmd & 0x3f];
-	snprintf(unknown_msg, sizeof(unknown_msg), "0x%02x", cmd);
-	return unknown_msg;
-}
-
-#define MSGSTART	0xff
-#define MSGEND		0xfe
-#define MSGESC		0xfd
-#define MSGOFFSET	3
-
-#define DATA_SIZE 256
-
-#define PING_PERIOD	(15 * HZ)
-
-#define NUM_MSGS 8
-
-struct pulse8 {
-	struct device *dev;
-	struct serio *serio;
-	struct cec_adapter *adap;
-	unsigned int vers;
-
-	struct delayed_work ping_eeprom_work;
-
-	struct work_struct irq_work;
-	struct cec_msg rx_msg[NUM_MSGS];
-	unsigned int rx_msg_cur_idx, rx_msg_num;
-	/* protect rx_msg_cur_idx and rx_msg_num */
-	spinlock_t msg_lock;
-	u8 new_rx_msg[CEC_MAX_MSG_SIZE];
-	u8 new_rx_msg_len;
-
-	struct work_struct tx_work;
-	u32 tx_done_status;
-	u32 tx_signal_free_time;
-	struct cec_msg tx_msg;
-	bool tx_msg_is_bcast;
-
-	struct completion cmd_done;
-	u8 data[DATA_SIZE];
-	unsigned int len;
-	u8 buf[DATA_SIZE];
-	unsigned int idx;
-	bool escape;
-	bool started;
-
-	/* locks access to the adapter */
-	struct mutex lock;
-	bool config_pending;
-	bool restoring_config;
-	bool autonomous;
-};
-
-static int pulse8_send(struct serio *serio, const u8 *command, u8 cmd_len)
-{
-	int err = 0;
-
-	err = serio_write(serio, MSGSTART);
-	if (err)
-		return err;
-	for (; !err && cmd_len; command++, cmd_len--) {
-		if (*command >= MSGESC) {
-			err = serio_write(serio, MSGESC);
-			if (!err)
-				err = serio_write(serio, *command - MSGOFFSET);
-		} else {
-			err = serio_write(serio, *command);
-		}
-	}
-	if (!err)
-		err = serio_write(serio, MSGEND);
-
-	return err;
-}
-
-static int pulse8_send_and_wait_once(struct pulse8 *pulse8,
-				     const u8 *cmd, u8 cmd_len,
-				     u8 response, u8 size)
-{
-	int err;
-
-	if (debug > 1)
-		dev_info(pulse8->dev, "transmit %s: %*ph\n",
-			 pulse8_msgname(cmd[0]), cmd_len, cmd);
-	init_completion(&pulse8->cmd_done);
-
-	err = pulse8_send(pulse8->serio, cmd, cmd_len);
-	if (err)
-		return err;
-
-	if (!wait_for_completion_timeout(&pulse8->cmd_done, HZ))
-		return -ETIMEDOUT;
-	if ((pulse8->data[0] & 0x3f) == MSGCODE_COMMAND_REJECTED &&
-	    cmd[0] != MSGCODE_SET_CONTROLLED &&
-	    cmd[0] != MSGCODE_SET_AUTO_ENABLED &&
-	    cmd[0] != MSGCODE_GET_BUILDDATE)
-		return -ENOTTY;
-	if (response &&
-	    ((pulse8->data[0] & 0x3f) != response || pulse8->len < size + 1)) {
-		dev_info(pulse8->dev, "transmit %s failed with %s\n",
-			 pulse8_msgname(cmd[0]),
-			 pulse8_msgname(pulse8->data[0]));
-		return -EIO;
-	}
-	return 0;
-}
-
-static int pulse8_send_and_wait(struct pulse8 *pulse8,
-				const u8 *cmd, u8 cmd_len, u8 response, u8 size)
-{
-	u8 cmd_sc[2];
-	int err;
-
-	err = pulse8_send_and_wait_once(pulse8, cmd, cmd_len, response, size);
-	if (err != -ENOTTY)
-		return err;
-
-	cmd_sc[0] = MSGCODE_SET_CONTROLLED;
-	cmd_sc[1] = 1;
-	err = pulse8_send_and_wait_once(pulse8, cmd_sc, 2,
-					MSGCODE_COMMAND_ACCEPTED, 1);
-	if (!err)
-		err = pulse8_send_and_wait_once(pulse8, cmd, cmd_len,
-						response, size);
-	return err == -ENOTTY ? -EIO : err;
-}
-
-static void pulse8_tx_work_handler(struct work_struct *work)
-{
-	struct pulse8 *pulse8 = container_of(work, struct pulse8, tx_work);
-	struct cec_msg *msg = &pulse8->tx_msg;
-	unsigned int i;
-	u8 cmd[2];
-	int err;
-
-	if (msg->len == 0)
-		return;
-
-	mutex_lock(&pulse8->lock);
-	cmd[0] = MSGCODE_TRANSMIT_IDLETIME;
-	cmd[1] = pulse8->tx_signal_free_time;
-	err = pulse8_send_and_wait(pulse8, cmd, 2,
-				   MSGCODE_COMMAND_ACCEPTED, 1);
-	cmd[0] = MSGCODE_TRANSMIT_ACK_POLARITY;
-	cmd[1] = cec_msg_is_broadcast(msg);
-	pulse8->tx_msg_is_bcast = cec_msg_is_broadcast(msg);
-	if (!err)
-		err = pulse8_send_and_wait(pulse8, cmd, 2,
-					   MSGCODE_COMMAND_ACCEPTED, 1);
-	cmd[0] = msg->len == 1 ? MSGCODE_TRANSMIT_EOM : MSGCODE_TRANSMIT;
-	cmd[1] = msg->msg[0];
-	if (!err)
-		err = pulse8_send_and_wait(pulse8, cmd, 2,
-					   MSGCODE_COMMAND_ACCEPTED, 1);
-	if (!err && msg->len > 1) {
-		for (i = 1; !err && i < msg->len; i++) {
-			cmd[0] = ((i == msg->len - 1)) ?
-				MSGCODE_TRANSMIT_EOM : MSGCODE_TRANSMIT;
-			cmd[1] = msg->msg[i];
-			err = pulse8_send_and_wait(pulse8, cmd, 2,
-						   MSGCODE_COMMAND_ACCEPTED, 1);
-		}
-	}
-	if (err && debug)
-		dev_info(pulse8->dev, "%s(0x%02x) failed with error %d for msg %*ph\n",
-			 pulse8_msgname(cmd[0]), cmd[1],
-			 err, msg->len, msg->msg);
-	msg->len = 0;
-	mutex_unlock(&pulse8->lock);
-	if (err)
-		cec_transmit_attempt_done(pulse8->adap, CEC_TX_STATUS_ERROR);
-}
-
-static void pulse8_irq_work_handler(struct work_struct *work)
-{
-	struct pulse8 *pulse8 =
-		container_of(work, struct pulse8, irq_work);
-	unsigned long flags;
-	u32 status;
-
-	spin_lock_irqsave(&pulse8->msg_lock, flags);
-	while (pulse8->rx_msg_num) {
-		spin_unlock_irqrestore(&pulse8->msg_lock, flags);
-		if (debug)
-			dev_info(pulse8->dev, "adap received %*ph\n",
-				 pulse8->rx_msg[pulse8->rx_msg_cur_idx].len,
-				 pulse8->rx_msg[pulse8->rx_msg_cur_idx].msg);
-		cec_received_msg(pulse8->adap,
-				 &pulse8->rx_msg[pulse8->rx_msg_cur_idx]);
-		spin_lock_irqsave(&pulse8->msg_lock, flags);
-		if (pulse8->rx_msg_num)
-			pulse8->rx_msg_num--;
-		pulse8->rx_msg_cur_idx =
-			(pulse8->rx_msg_cur_idx + 1) % NUM_MSGS;
-	}
-	spin_unlock_irqrestore(&pulse8->msg_lock, flags);
-
-	mutex_lock(&pulse8->lock);
-	status = pulse8->tx_done_status;
-	pulse8->tx_done_status = 0;
-	mutex_unlock(&pulse8->lock);
-	if (status)
-		cec_transmit_attempt_done(pulse8->adap, status);
-}
-
-static irqreturn_t pulse8_interrupt(struct serio *serio, unsigned char data,
-				    unsigned int flags)
-{
-	struct pulse8 *pulse8 = serio_get_drvdata(serio);
-	unsigned long irq_flags;
-	unsigned int idx;
-
-	if (!pulse8->started && data != MSGSTART)
-		return IRQ_HANDLED;
-	if (data == MSGESC) {
-		pulse8->escape = true;
-		return IRQ_HANDLED;
-	}
-	if (pulse8->escape) {
-		data += MSGOFFSET;
-		pulse8->escape = false;
-	} else if (data == MSGEND) {
-		u8 msgcode = pulse8->buf[0];
-
-		if (debug > 1)
-			dev_info(pulse8->dev, "received %s: %*ph\n",
-				 pulse8_msgname(msgcode),
-				 pulse8->idx, pulse8->buf);
-		switch (msgcode & 0x3f) {
-		case MSGCODE_FRAME_START:
-			/*
-			 * Test if we are receiving a new msg when a previous
-			 * message is still pending.
-			 */
-			if (!(msgcode & MSGCODE_FRAME_EOM)) {
-				pulse8->new_rx_msg_len = 1;
-				pulse8->new_rx_msg[0] = pulse8->buf[1];
-				break;
-			}
-			/* fall through */
-		case MSGCODE_FRAME_DATA:
-			if (pulse8->new_rx_msg_len < CEC_MAX_MSG_SIZE)
-				pulse8->new_rx_msg[pulse8->new_rx_msg_len++] =
-					pulse8->buf[1];
-			if (!(msgcode & MSGCODE_FRAME_EOM))
-				break;
-
-			spin_lock_irqsave(&pulse8->msg_lock, irq_flags);
-			idx = (pulse8->rx_msg_cur_idx + pulse8->rx_msg_num) %
-				NUM_MSGS;
-			if (pulse8->rx_msg_num == NUM_MSGS) {
-				dev_warn(pulse8->dev,
-					 "message queue is full, dropping %*ph\n",
-					 pulse8->new_rx_msg_len,
-					 pulse8->new_rx_msg);
-				spin_unlock_irqrestore(&pulse8->msg_lock,
-						       irq_flags);
-				pulse8->new_rx_msg_len = 0;
-				break;
-			}
-			pulse8->rx_msg_num++;
-			memcpy(pulse8->rx_msg[idx].msg, pulse8->new_rx_msg,
-			       pulse8->new_rx_msg_len);
-			pulse8->rx_msg[idx].len = pulse8->new_rx_msg_len;
-			spin_unlock_irqrestore(&pulse8->msg_lock, irq_flags);
-			schedule_work(&pulse8->irq_work);
-			pulse8->new_rx_msg_len = 0;
-			break;
-		case MSGCODE_TRANSMIT_SUCCEEDED:
-			WARN_ON(pulse8->tx_done_status);
-			pulse8->tx_done_status = CEC_TX_STATUS_OK;
-			schedule_work(&pulse8->irq_work);
-			break;
-		case MSGCODE_TRANSMIT_FAILED_ACK:
-			/*
-			 * A NACK for a broadcast message makes no sense, these
-			 * seem to be spurious messages and are skipped.
-			 */
-			if (pulse8->tx_msg_is_bcast)
-				break;
-			WARN_ON(pulse8->tx_done_status);
-			pulse8->tx_done_status = CEC_TX_STATUS_NACK;
-			schedule_work(&pulse8->irq_work);
-			break;
-		case MSGCODE_TRANSMIT_FAILED_LINE:
-		case MSGCODE_TRANSMIT_FAILED_TIMEOUT_DATA:
-		case MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE:
-			WARN_ON(pulse8->tx_done_status);
-			pulse8->tx_done_status = CEC_TX_STATUS_ERROR;
-			schedule_work(&pulse8->irq_work);
-			break;
-		case MSGCODE_HIGH_ERROR:
-		case MSGCODE_LOW_ERROR:
-		case MSGCODE_RECEIVE_FAILED:
-		case MSGCODE_TIMEOUT_ERROR:
-			pulse8->new_rx_msg_len = 0;
-			break;
-		case MSGCODE_COMMAND_ACCEPTED:
-		case MSGCODE_COMMAND_REJECTED:
-		default:
-			if (pulse8->idx == 0)
-				break;
-			memcpy(pulse8->data, pulse8->buf, pulse8->idx);
-			pulse8->len = pulse8->idx;
-			complete(&pulse8->cmd_done);
-			break;
-		}
-		pulse8->idx = 0;
-		pulse8->started = false;
-		return IRQ_HANDLED;
-	} else if (data == MSGSTART) {
-		pulse8->idx = 0;
-		pulse8->started = true;
-		return IRQ_HANDLED;
-	}
-
-	if (pulse8->idx >= DATA_SIZE) {
-		dev_dbg(pulse8->dev,
-			"throwing away %d bytes of garbage\n", pulse8->idx);
-		pulse8->idx = 0;
-	}
-	pulse8->buf[pulse8->idx++] = data;
-	return IRQ_HANDLED;
-}
-
-static int pulse8_cec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	struct pulse8 *pulse8 = cec_get_drvdata(adap);
-	u8 cmd[16];
-	int err;
-
-	mutex_lock(&pulse8->lock);
-	cmd[0] = MSGCODE_SET_CONTROLLED;
-	cmd[1] = enable;
-	err = pulse8_send_and_wait(pulse8, cmd, 2,
-				   MSGCODE_COMMAND_ACCEPTED, 1);
-	if (!enable) {
-		pulse8->rx_msg_num = 0;
-		pulse8->tx_done_status = 0;
-	}
-	mutex_unlock(&pulse8->lock);
-	return enable ? err : 0;
-}
-
-static int pulse8_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
-{
-	struct pulse8 *pulse8 = cec_get_drvdata(adap);
-	u16 mask = 0;
-	u16 pa = adap->phys_addr;
-	u8 cmd[16];
-	int err = 0;
-
-	mutex_lock(&pulse8->lock);
-	if (log_addr != CEC_LOG_ADDR_INVALID)
-		mask = 1 << log_addr;
-	cmd[0] = MSGCODE_SET_ACK_MASK;
-	cmd[1] = mask >> 8;
-	cmd[2] = mask & 0xff;
-	err = pulse8_send_and_wait(pulse8, cmd, 3,
-				   MSGCODE_COMMAND_ACCEPTED, 0);
-	if ((err && mask != 0) || pulse8->restoring_config)
-		goto unlock;
-
-	cmd[0] = MSGCODE_SET_AUTO_ENABLED;
-	cmd[1] = log_addr == CEC_LOG_ADDR_INVALID ? 0 : 1;
-	err = pulse8_send_and_wait(pulse8, cmd, 2,
-				   MSGCODE_COMMAND_ACCEPTED, 0);
-	if (err)
-		goto unlock;
-	pulse8->autonomous = cmd[1];
-	if (log_addr == CEC_LOG_ADDR_INVALID)
-		goto unlock;
-
-	cmd[0] = MSGCODE_SET_DEVICE_TYPE;
-	cmd[1] = adap->log_addrs.primary_device_type[0];
-	err = pulse8_send_and_wait(pulse8, cmd, 2,
-				   MSGCODE_COMMAND_ACCEPTED, 0);
-	if (err)
-		goto unlock;
-
-	switch (adap->log_addrs.primary_device_type[0]) {
-	case CEC_OP_PRIM_DEVTYPE_TV:
-		mask = CEC_LOG_ADDR_MASK_TV;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_RECORD:
-		mask = CEC_LOG_ADDR_MASK_RECORD;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_TUNER:
-		mask = CEC_LOG_ADDR_MASK_TUNER;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_PLAYBACK:
-		mask = CEC_LOG_ADDR_MASK_PLAYBACK;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM:
-		mask = CEC_LOG_ADDR_MASK_AUDIOSYSTEM;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_SWITCH:
-		mask = CEC_LOG_ADDR_MASK_UNREGISTERED;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_PROCESSOR:
-		mask = CEC_LOG_ADDR_MASK_SPECIFIC;
-		break;
-	default:
-		mask = 0;
-		break;
-	}
-	cmd[0] = MSGCODE_SET_LOGICAL_ADDRESS_MASK;
-	cmd[1] = mask >> 8;
-	cmd[2] = mask & 0xff;
-	err = pulse8_send_and_wait(pulse8, cmd, 3,
-				   MSGCODE_COMMAND_ACCEPTED, 0);
-	if (err)
-		goto unlock;
-
-	cmd[0] = MSGCODE_SET_DEFAULT_LOGICAL_ADDRESS;
-	cmd[1] = log_addr;
-	err = pulse8_send_and_wait(pulse8, cmd, 2,
-				   MSGCODE_COMMAND_ACCEPTED, 0);
-	if (err)
-		goto unlock;
-
-	cmd[0] = MSGCODE_SET_PHYSICAL_ADDRESS;
-	cmd[1] = pa >> 8;
-	cmd[2] = pa & 0xff;
-	err = pulse8_send_and_wait(pulse8, cmd, 3,
-				   MSGCODE_COMMAND_ACCEPTED, 0);
-	if (err)
-		goto unlock;
-
-	cmd[0] = MSGCODE_SET_HDMI_VERSION;
-	cmd[1] = adap->log_addrs.cec_version;
-	err = pulse8_send_and_wait(pulse8, cmd, 2,
-				   MSGCODE_COMMAND_ACCEPTED, 0);
-	if (err)
-		goto unlock;
-
-	if (adap->log_addrs.osd_name[0]) {
-		size_t osd_len = strlen(adap->log_addrs.osd_name);
-		char *osd_str = cmd + 1;
-
-		cmd[0] = MSGCODE_SET_OSD_NAME;
-		strscpy(cmd + 1, adap->log_addrs.osd_name, sizeof(cmd) - 1);
-		if (osd_len < 4) {
-			memset(osd_str + osd_len, ' ', 4 - osd_len);
-			osd_len = 4;
-			osd_str[osd_len] = '\0';
-			strscpy(adap->log_addrs.osd_name, osd_str,
-				sizeof(adap->log_addrs.osd_name));
-		}
-		err = pulse8_send_and_wait(pulse8, cmd, 1 + osd_len,
-					   MSGCODE_COMMAND_ACCEPTED, 0);
-		if (err)
-			goto unlock;
-	}
-
-unlock:
-	if (pulse8->restoring_config)
-		pulse8->restoring_config = false;
-	else
-		pulse8->config_pending = true;
-	mutex_unlock(&pulse8->lock);
-	return log_addr == CEC_LOG_ADDR_INVALID ? 0 : err;
-}
-
-static int pulse8_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
-				    u32 signal_free_time, struct cec_msg *msg)
-{
-	struct pulse8 *pulse8 = cec_get_drvdata(adap);
-
-	pulse8->tx_msg = *msg;
-	if (debug)
-		dev_info(pulse8->dev, "adap transmit %*ph\n",
-			 msg->len, msg->msg);
-	pulse8->tx_signal_free_time = signal_free_time;
-	schedule_work(&pulse8->tx_work);
-	return 0;
-}
-
-static void pulse8_cec_adap_free(struct cec_adapter *adap)
-{
-	struct pulse8 *pulse8 = cec_get_drvdata(adap);
-
-	cancel_delayed_work_sync(&pulse8->ping_eeprom_work);
-	cancel_work_sync(&pulse8->irq_work);
-	cancel_work_sync(&pulse8->tx_work);
-	kfree(pulse8);
-}
-
-static const struct cec_adap_ops pulse8_cec_adap_ops = {
-	.adap_enable = pulse8_cec_adap_enable,
-	.adap_log_addr = pulse8_cec_adap_log_addr,
-	.adap_transmit = pulse8_cec_adap_transmit,
-	.adap_free = pulse8_cec_adap_free,
-};
-
-static void pulse8_disconnect(struct serio *serio)
-{
-	struct pulse8 *pulse8 = serio_get_drvdata(serio);
-
-	cec_unregister_adapter(pulse8->adap);
-	pulse8->serio = NULL;
-	serio_set_drvdata(serio, NULL);
-	serio_close(serio);
-}
-
-static int pulse8_setup(struct pulse8 *pulse8, struct serio *serio,
-			struct cec_log_addrs *log_addrs, u16 *pa)
-{
-	u8 *data = pulse8->data + 1;
-	u8 cmd[2];
-	int err;
-	struct tm tm;
-	time64_t date;
-
-	pulse8->vers = 0;
-
-	cmd[0] = MSGCODE_FIRMWARE_VERSION;
-	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 2);
-	if (err)
-		return err;
-	pulse8->vers = (data[0] << 8) | data[1];
-	dev_info(pulse8->dev, "Firmware version %04x\n", pulse8->vers);
-	if (pulse8->vers < 2) {
-		*pa = CEC_PHYS_ADDR_INVALID;
-		return 0;
-	}
-
-	cmd[0] = MSGCODE_GET_BUILDDATE;
-	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 4);
-	if (err)
-		return err;
-	date = (data[0] << 24) | (data[1] << 16) | (data[2] << 8) | data[3];
-	time64_to_tm(date, 0, &tm);
-	dev_info(pulse8->dev, "Firmware build date %04ld.%02d.%02d %02d:%02d:%02d\n",
-		 tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
-		 tm.tm_hour, tm.tm_min, tm.tm_sec);
-
-	dev_dbg(pulse8->dev, "Persistent config:\n");
-	cmd[0] = MSGCODE_GET_AUTO_ENABLED;
-	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
-	if (err)
-		return err;
-	pulse8->autonomous = data[0];
-	dev_dbg(pulse8->dev, "Autonomous mode: %s",
-		data[0] ? "on" : "off");
-
-	cmd[0] = MSGCODE_GET_DEVICE_TYPE;
-	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
-	if (err)
-		return err;
-	log_addrs->primary_device_type[0] = data[0];
-	dev_dbg(pulse8->dev, "Primary device type: %d\n", data[0]);
-	switch (log_addrs->primary_device_type[0]) {
-	case CEC_OP_PRIM_DEVTYPE_TV:
-		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_TV;
-		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_TV;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_RECORD:
-		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_RECORD;
-		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_RECORD;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_TUNER:
-		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_TUNER;
-		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_TUNER;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_PLAYBACK:
-		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_PLAYBACK;
-		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_PLAYBACK;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM:
-		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_PLAYBACK;
-		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_SWITCH:
-		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
-		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
-		break;
-	case CEC_OP_PRIM_DEVTYPE_PROCESSOR:
-		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_SPECIFIC;
-		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
-		break;
-	default:
-		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
-		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
-		dev_info(pulse8->dev, "Unknown Primary Device Type: %d\n",
-			 log_addrs->primary_device_type[0]);
-		break;
-	}
-
-	cmd[0] = MSGCODE_GET_LOGICAL_ADDRESS_MASK;
-	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 2);
-	if (err)
-		return err;
-	log_addrs->log_addr_mask = (data[0] << 8) | data[1];
-	dev_dbg(pulse8->dev, "Logical address ACK mask: %x\n",
-		log_addrs->log_addr_mask);
-	if (log_addrs->log_addr_mask)
-		log_addrs->num_log_addrs = 1;
-
-	cmd[0] = MSGCODE_GET_PHYSICAL_ADDRESS;
-	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
-	if (err)
-		return err;
-	*pa = (data[0] << 8) | data[1];
-	dev_dbg(pulse8->dev, "Physical address: %x.%x.%x.%x\n",
-		cec_phys_addr_exp(*pa));
-
-	cmd[0] = MSGCODE_GET_HDMI_VERSION;
-	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
-	if (err)
-		return err;
-	log_addrs->cec_version = data[0];
-	dev_dbg(pulse8->dev, "CEC version: %d\n", log_addrs->cec_version);
-
-	cmd[0] = MSGCODE_GET_OSD_NAME;
-	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 0);
-	if (err)
-		return err;
-	strscpy(log_addrs->osd_name, data, sizeof(log_addrs->osd_name));
-	dev_dbg(pulse8->dev, "OSD name: %s\n", log_addrs->osd_name);
-
-	return 0;
-}
-
-static int pulse8_apply_persistent_config(struct pulse8 *pulse8,
-					  struct cec_log_addrs *log_addrs,
-					  u16 pa)
-{
-	int err;
-
-	err = cec_s_log_addrs(pulse8->adap, log_addrs, false);
-	if (err)
-		return err;
-
-	cec_s_phys_addr(pulse8->adap, pa, false);
-
-	return 0;
-}
-
-static void pulse8_ping_eeprom_work_handler(struct work_struct *work)
-{
-	struct pulse8 *pulse8 =
-		container_of(work, struct pulse8, ping_eeprom_work.work);
-	u8 cmd;
-
-	mutex_lock(&pulse8->lock);
-	cmd = MSGCODE_PING;
-	pulse8_send_and_wait(pulse8, &cmd, 1,
-			     MSGCODE_COMMAND_ACCEPTED, 0);
-
-	if (pulse8->vers < 2)
-		goto unlock;
-
-	if (pulse8->config_pending && persistent_config) {
-		dev_dbg(pulse8->dev, "writing pending config to EEPROM\n");
-		cmd = MSGCODE_WRITE_EEPROM;
-		if (pulse8_send_and_wait(pulse8, &cmd, 1,
-					 MSGCODE_COMMAND_ACCEPTED, 0))
-			dev_info(pulse8->dev, "failed to write pending config to EEPROM\n");
-		else
-			pulse8->config_pending = false;
-	}
-unlock:
-	schedule_delayed_work(&pulse8->ping_eeprom_work, PING_PERIOD);
-	mutex_unlock(&pulse8->lock);
-}
-
-static int pulse8_connect(struct serio *serio, struct serio_driver *drv)
-{
-	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_PHYS_ADDR | CEC_CAP_MONITOR_ALL;
-	struct pulse8 *pulse8;
-	int err = -ENOMEM;
-	struct cec_log_addrs log_addrs = {};
-	u16 pa = CEC_PHYS_ADDR_INVALID;
-
-	pulse8 = kzalloc(sizeof(*pulse8), GFP_KERNEL);
-
-	if (!pulse8)
-		return -ENOMEM;
-
-	pulse8->serio = serio;
-	pulse8->adap = cec_allocate_adapter(&pulse8_cec_adap_ops, pulse8,
-					    dev_name(&serio->dev), caps, 1);
-	err = PTR_ERR_OR_ZERO(pulse8->adap);
-	if (err < 0)
-		goto free_device;
-
-	pulse8->dev = &serio->dev;
-	serio_set_drvdata(serio, pulse8);
-	INIT_WORK(&pulse8->irq_work, pulse8_irq_work_handler);
-	INIT_WORK(&pulse8->tx_work, pulse8_tx_work_handler);
-	INIT_DELAYED_WORK(&pulse8->ping_eeprom_work,
-			  pulse8_ping_eeprom_work_handler);
-	mutex_init(&pulse8->lock);
-	spin_lock_init(&pulse8->msg_lock);
-	pulse8->config_pending = false;
-
-	err = serio_open(serio, drv);
-	if (err)
-		goto delete_adap;
-
-	err = pulse8_setup(pulse8, serio, &log_addrs, &pa);
-	if (err)
-		goto close_serio;
-
-	err = cec_register_adapter(pulse8->adap, &serio->dev);
-	if (err < 0)
-		goto close_serio;
-
-	pulse8->dev = &pulse8->adap->devnode.dev;
-
-	if (persistent_config && pulse8->autonomous) {
-		err = pulse8_apply_persistent_config(pulse8, &log_addrs, pa);
-		if (err)
-			goto close_serio;
-		pulse8->restoring_config = true;
-	}
-
-	schedule_delayed_work(&pulse8->ping_eeprom_work, PING_PERIOD);
-
-	return 0;
-
-close_serio:
-	pulse8->serio = NULL;
-	serio_set_drvdata(serio, NULL);
-	serio_close(serio);
-delete_adap:
-	cec_delete_adapter(pulse8->adap);
-free_device:
-	kfree(pulse8);
-	return err;
-}
-
-static const struct serio_device_id pulse8_serio_ids[] = {
-	{
-		.type	= SERIO_RS232,
-		.proto	= SERIO_PULSE8_CEC,
-		.id	= SERIO_ANY,
-		.extra	= SERIO_ANY,
-	},
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(serio, pulse8_serio_ids);
-
-static struct serio_driver pulse8_drv = {
-	.driver		= {
-		.name	= "pulse8-cec",
-	},
-	.description	= "Pulse Eight HDMI CEC driver",
-	.id_table	= pulse8_serio_ids,
-	.interrupt	= pulse8_interrupt,
-	.connect	= pulse8_connect,
-	.disconnect	= pulse8_disconnect,
-};
-
-module_serio_driver(pulse8_drv);
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c
index 275394bafe7d..63db04fe12d3 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c
@@ -564,7 +564,7 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw)
 		strscpy(info.type, "ir_video", I2C_NAME_SIZE);
 		pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.",
 			   info.type, info.addr);
-		i2c_new_device(&hdw->i2c_adap, &info);
+		i2c_new_client_device(&hdw->i2c_adap, &info);
 		break;
 	case PVR2_IR_SCHEME_ZILOG:     /* HVR-1950 style */
 	case PVR2_IR_SCHEME_24XXX_MCE: /* 24xxx MCE device */
@@ -579,7 +579,7 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw)
 		strscpy(info.type, "ir_z8f0811_haup", I2C_NAME_SIZE);
 		pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.",
 			   info.type, info.addr);
-		i2c_new_device(&hdw->i2c_adap, &info);
+		i2c_new_client_device(&hdw->i2c_adap, &info);
 		break;
 	default:
 		/* The device either doesn't support I2C-based IR or we
diff --git a/drivers/media/usb/pwc/pwc-ctrl.c b/drivers/media/usb/pwc/pwc-ctrl.c
index 315c55927f5c..cff64d872058 100644
--- a/drivers/media/usb/pwc/pwc-ctrl.c
+++ b/drivers/media/usb/pwc/pwc-ctrl.c
@@ -523,7 +523,7 @@ int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value)
 #ifdef CONFIG_USB_PWC_DEBUG
 int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
 {
-	int ret = -1, request;
+	int ret, request;
 
 	if (pdev->type < 675)
 		request = SENSOR_TYPE_FORMATTER1;
diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c
index d57b8b786506..61869636ec61 100644
--- a/drivers/media/usb/pwc/pwc-if.c
+++ b/drivers/media/usb/pwc/pwc-if.c
@@ -71,37 +71,45 @@
 
 /* hotplug device table support */
 static const struct usb_device_id pwc_device_table [] = {
-	{ USB_DEVICE(0x0471, 0x0302) }, /* Philips models */
-	{ USB_DEVICE(0x0471, 0x0303) },
-	{ USB_DEVICE(0x0471, 0x0304) },
-	{ USB_DEVICE(0x0471, 0x0307) },
-	{ USB_DEVICE(0x0471, 0x0308) },
-	{ USB_DEVICE(0x0471, 0x030C) },
-	{ USB_DEVICE(0x0471, 0x0310) },
-	{ USB_DEVICE(0x0471, 0x0311) }, /* Philips ToUcam PRO II */
-	{ USB_DEVICE(0x0471, 0x0312) },
-	{ USB_DEVICE(0x0471, 0x0313) }, /* the 'new' 720K */
-	{ USB_DEVICE(0x0471, 0x0329) }, /* Philips SPC 900NC PC Camera */
-	{ USB_DEVICE(0x0471, 0x032C) }, /* Philips SPC 880NC PC Camera */
-	{ USB_DEVICE(0x069A, 0x0001) }, /* Askey */
-	{ USB_DEVICE(0x046D, 0x08B0) }, /* Logitech QuickCam Pro 3000 */
+	{ USB_DEVICE(0x041E, 0x400C) }, /* Creative Webcam 5 */
+	{ USB_DEVICE(0x041E, 0x4011) }, /* Creative Webcam Pro Ex */
+
+	{ USB_DEVICE(0x046D, 0x08B0) }, /* Logitech QuickCam 3000 Pro */
 	{ USB_DEVICE(0x046D, 0x08B1) }, /* Logitech QuickCam Notebook Pro */
-	{ USB_DEVICE(0x046D, 0x08B2) }, /* Logitech QuickCam Pro 4000 */
+	{ USB_DEVICE(0x046D, 0x08B2) }, /* Logitech QuickCam 4000 Pro */
 	{ USB_DEVICE(0x046D, 0x08B3) }, /* Logitech QuickCam Zoom (old model) */
 	{ USB_DEVICE(0x046D, 0x08B4) }, /* Logitech QuickCam Zoom (new model) */
 	{ USB_DEVICE(0x046D, 0x08B5) }, /* Logitech QuickCam Orbit/Sphere */
-	{ USB_DEVICE(0x046D, 0x08B6) }, /* Cisco VT Camera */
+	{ USB_DEVICE(0x046D, 0x08B6) }, /* Logitech/Cisco VT Camera */
 	{ USB_DEVICE(0x046D, 0x08B7) }, /* Logitech ViewPort AV 100 */
-	{ USB_DEVICE(0x046D, 0x08B8) }, /* Logitech (reserved) */
+	{ USB_DEVICE(0x046D, 0x08B8) }, /* Logitech QuickCam */
+
+	{ USB_DEVICE(0x0471, 0x0302) }, /* Philips PCA645VC */
+	{ USB_DEVICE(0x0471, 0x0303) }, /* Philips PCA646VC */
+	{ USB_DEVICE(0x0471, 0x0304) }, /* Askey VC010 type 2 */
+	{ USB_DEVICE(0x0471, 0x0307) }, /* Philips PCVC675K (Vesta) */
+	{ USB_DEVICE(0x0471, 0x0308) }, /* Philips PCVC680K (Vesta Pro) */
+	{ USB_DEVICE(0x0471, 0x030C) }, /* Philips PCVC690K (Vesta Pro Scan) */
+	{ USB_DEVICE(0x0471, 0x0310) }, /* Philips PCVC730K (ToUCam Fun)/PCVC830 (ToUCam II) */
+	{ USB_DEVICE(0x0471, 0x0311) }, /* Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) */
+	{ USB_DEVICE(0x0471, 0x0312) }, /* Philips PCVC750K (ToUCam Pro Scan) */
+	{ USB_DEVICE(0x0471, 0x0313) }, /* Philips PCVC720K/40 (ToUCam XS) */
+	{ USB_DEVICE(0x0471, 0x0329) }, /* Philips SPC 900NC webcam */
+	{ USB_DEVICE(0x0471, 0x032C) }, /* Philips SPC 880NC webcam */
+
+	{ USB_DEVICE(0x04CC, 0x8116) }, /* Sotec Afina Eye */
+
 	{ USB_DEVICE(0x055D, 0x9000) }, /* Samsung MPC-C10 */
 	{ USB_DEVICE(0x055D, 0x9001) }, /* Samsung MPC-C30 */
 	{ USB_DEVICE(0x055D, 0x9002) },	/* Samsung SNC-35E (Ver3.0) */
-	{ USB_DEVICE(0x041E, 0x400C) }, /* Creative Webcam 5 */
-	{ USB_DEVICE(0x041E, 0x4011) }, /* Creative Webcam Pro Ex */
-	{ USB_DEVICE(0x04CC, 0x8116) }, /* Afina Eye */
-	{ USB_DEVICE(0x06BE, 0x8116) }, /* new Afina Eye */
-	{ USB_DEVICE(0x0d81, 0x1910) }, /* Visionite */
-	{ USB_DEVICE(0x0d81, 0x1900) },
+
+	{ USB_DEVICE(0x069A, 0x0001) }, /* Askey VC010 type 1 */
+
+	{ USB_DEVICE(0x06BE, 0x8116) }, /* AME Co. Afina Eye */
+
+	{ USB_DEVICE(0x0d81, 0x1900) }, /* Visionite VCS-UC300 */
+	{ USB_DEVICE(0x0d81, 0x1910) }, /* Visionite VCS-UM100 */
+
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, pwc_device_table);
diff --git a/drivers/media/usb/pwc/pwc.h b/drivers/media/usb/pwc/pwc.h
index 3362962d0d00..b02a3c7b7742 100644
--- a/drivers/media/usb/pwc/pwc.h
+++ b/drivers/media/usb/pwc/pwc.h
@@ -193,7 +193,7 @@ struct pwc_raw_frame {
 				   decompressor) */
 	__u8   cmd[4];		/* the four byte of the command (in case of
 				   nala, only the first 3 bytes is filled) */
-	__u8   rawframe[0];	/* frame_size = H / 4 * vbandlength */
+	__u8   rawframe[];	/* frame_size = H / 4 * vbandlength */
 } __packed;
 
 /* intermediate buffers with raw data from the USB cam */
diff --git a/drivers/media/usb/rainshadow-cec/Kconfig b/drivers/media/usb/rainshadow-cec/Kconfig
deleted file mode 100644
index b481c5157d7e..000000000000
--- a/drivers/media/usb/rainshadow-cec/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config USB_RAINSHADOW_CEC
-	tristate "RainShadow Tech HDMI CEC"
-	depends on USB_ACM
-	select CEC_CORE
-	select SERIO
-	select SERIO_SERPORT
-	help
-	  This is a cec driver for the RainShadow Tech HDMI CEC device.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rainshadow-cec.
diff --git a/drivers/media/usb/rainshadow-cec/Makefile b/drivers/media/usb/rainshadow-cec/Makefile
deleted file mode 100644
index 47b33c574c3e..000000000000
--- a/drivers/media/usb/rainshadow-cec/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec.o
diff --git a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c
deleted file mode 100644
index ee870ea1a886..000000000000
--- a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c
+++ /dev/null
@@ -1,380 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * RainShadow Tech HDMI CEC driver
- *
- * Copyright 2016 Hans Verkuil <hverkuil@xs4all.nl
- */
-
-/*
- * Notes:
- *
- * The higher level protocols are currently disabled. This can be added
- * later, similar to how this is done for the Pulse Eight CEC driver.
- *
- * Documentation of the protocol is available here:
- *
- * http://rainshadowtech.com/doc/HDMICECtoUSBandRS232v2.0.pdf
- */
-
-#include <linux/completion.h>
-#include <linux/ctype.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/serio.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/time.h>
-#include <linux/workqueue.h>
-
-#include <media/cec.h>
-
-MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>");
-MODULE_DESCRIPTION("RainShadow Tech HDMI CEC driver");
-MODULE_LICENSE("GPL");
-
-#define DATA_SIZE 256
-
-struct rain {
-	struct device *dev;
-	struct serio *serio;
-	struct cec_adapter *adap;
-	struct completion cmd_done;
-	struct work_struct work;
-
-	/* Low-level ringbuffer, collecting incoming characters */
-	char buf[DATA_SIZE];
-	unsigned int buf_rd_idx;
-	unsigned int buf_wr_idx;
-	unsigned int buf_len;
-	spinlock_t buf_lock;
-
-	/* command buffer */
-	char cmd[DATA_SIZE];
-	unsigned int cmd_idx;
-	bool cmd_started;
-
-	/* reply to a command, only used to store the firmware version */
-	char cmd_reply[DATA_SIZE];
-
-	struct mutex write_lock;
-};
-
-static void rain_process_msg(struct rain *rain)
-{
-	struct cec_msg msg = {};
-	const char *cmd = rain->cmd + 3;
-	int stat = -1;
-
-	for (; *cmd; cmd++) {
-		if (!isxdigit(*cmd))
-			continue;
-		if (isxdigit(cmd[0]) && isxdigit(cmd[1])) {
-			if (msg.len == CEC_MAX_MSG_SIZE)
-				break;
-			if (hex2bin(msg.msg + msg.len, cmd, 1))
-				continue;
-			msg.len++;
-			cmd++;
-			continue;
-		}
-		if (!cmd[1])
-			stat = hex_to_bin(cmd[0]);
-		break;
-	}
-
-	if (rain->cmd[0] == 'R') {
-		if (stat == 1 || stat == 2)
-			cec_received_msg(rain->adap, &msg);
-		return;
-	}
-
-	switch (stat) {
-	case 1:
-		cec_transmit_attempt_done(rain->adap, CEC_TX_STATUS_OK);
-		break;
-	case 2:
-		cec_transmit_attempt_done(rain->adap, CEC_TX_STATUS_NACK);
-		break;
-	default:
-		cec_transmit_attempt_done(rain->adap, CEC_TX_STATUS_LOW_DRIVE);
-		break;
-	}
-}
-
-static void rain_irq_work_handler(struct work_struct *work)
-{
-	struct rain *rain =
-		container_of(work, struct rain, work);
-
-	while (true) {
-		unsigned long flags;
-		char data;
-
-		spin_lock_irqsave(&rain->buf_lock, flags);
-		if (!rain->buf_len) {
-			spin_unlock_irqrestore(&rain->buf_lock, flags);
-			break;
-		}
-
-		data = rain->buf[rain->buf_rd_idx];
-		rain->buf_len--;
-		rain->buf_rd_idx = (rain->buf_rd_idx + 1) & 0xff;
-
-		spin_unlock_irqrestore(&rain->buf_lock, flags);
-
-		if (!rain->cmd_started && data != '?')
-			continue;
-
-		switch (data) {
-		case '\r':
-			rain->cmd[rain->cmd_idx] = '\0';
-			dev_dbg(rain->dev, "received: %s\n", rain->cmd);
-			if (!memcmp(rain->cmd, "REC", 3) ||
-			    !memcmp(rain->cmd, "STA", 3)) {
-				rain_process_msg(rain);
-			} else {
-				strscpy(rain->cmd_reply, rain->cmd,
-					sizeof(rain->cmd_reply));
-				complete(&rain->cmd_done);
-			}
-			rain->cmd_idx = 0;
-			rain->cmd_started = false;
-			break;
-
-		case '\n':
-			rain->cmd_idx = 0;
-			rain->cmd_started = false;
-			break;
-
-		case '?':
-			rain->cmd_idx = 0;
-			rain->cmd_started = true;
-			break;
-
-		default:
-			if (rain->cmd_idx >= DATA_SIZE - 1) {
-				dev_dbg(rain->dev,
-					"throwing away %d bytes of garbage\n", rain->cmd_idx);
-				rain->cmd_idx = 0;
-			}
-			rain->cmd[rain->cmd_idx++] = data;
-			break;
-		}
-	}
-}
-
-static irqreturn_t rain_interrupt(struct serio *serio, unsigned char data,
-				    unsigned int flags)
-{
-	struct rain *rain = serio_get_drvdata(serio);
-
-	if (rain->buf_len == DATA_SIZE) {
-		dev_warn_once(rain->dev, "buffer overflow\n");
-		return IRQ_HANDLED;
-	}
-	spin_lock(&rain->buf_lock);
-	rain->buf_len++;
-	rain->buf[rain->buf_wr_idx] = data;
-	rain->buf_wr_idx = (rain->buf_wr_idx + 1) & 0xff;
-	spin_unlock(&rain->buf_lock);
-	schedule_work(&rain->work);
-	return IRQ_HANDLED;
-}
-
-static void rain_disconnect(struct serio *serio)
-{
-	struct rain *rain = serio_get_drvdata(serio);
-
-	cancel_work_sync(&rain->work);
-	cec_unregister_adapter(rain->adap);
-	dev_info(&serio->dev, "disconnected\n");
-	serio_close(serio);
-	serio_set_drvdata(serio, NULL);
-	kfree(rain);
-}
-
-static int rain_send(struct rain *rain, const char *command)
-{
-	int err = serio_write(rain->serio, '!');
-
-	dev_dbg(rain->dev, "send: %s\n", command);
-	while (!err && *command)
-		err = serio_write(rain->serio, *command++);
-	if (!err)
-		err = serio_write(rain->serio, '~');
-
-	return err;
-}
-
-static int rain_send_and_wait(struct rain *rain,
-			      const char *cmd, const char *reply)
-{
-	int err;
-
-	init_completion(&rain->cmd_done);
-
-	mutex_lock(&rain->write_lock);
-	err = rain_send(rain, cmd);
-	if (err)
-		goto err;
-
-	if (!wait_for_completion_timeout(&rain->cmd_done, HZ)) {
-		err = -ETIMEDOUT;
-		goto err;
-	}
-	if (reply && strncmp(rain->cmd_reply, reply, strlen(reply))) {
-		dev_dbg(rain->dev,
-			 "transmit of '%s': received '%s' instead of '%s'\n",
-			 cmd, rain->cmd_reply, reply);
-		err = -EIO;
-	}
-err:
-	mutex_unlock(&rain->write_lock);
-	return err;
-}
-
-static int rain_setup(struct rain *rain, struct serio *serio,
-			struct cec_log_addrs *log_addrs, u16 *pa)
-{
-	int err;
-
-	err = rain_send_and_wait(rain, "R", "REV");
-	if (err)
-		return err;
-	dev_info(rain->dev, "Firmware version %s\n", rain->cmd_reply + 4);
-
-	err = rain_send_and_wait(rain, "Q 1", "QTY");
-	if (err)
-		return err;
-	err = rain_send_and_wait(rain, "c0000", "CFG");
-	if (err)
-		return err;
-	return rain_send_and_wait(rain, "A F 0000", "ADR");
-}
-
-static int rain_cec_adap_enable(struct cec_adapter *adap, bool enable)
-{
-	return 0;
-}
-
-static int rain_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
-{
-	struct rain *rain = cec_get_drvdata(adap);
-	u8 cmd[16];
-
-	if (log_addr == CEC_LOG_ADDR_INVALID)
-		log_addr = CEC_LOG_ADDR_UNREGISTERED;
-	snprintf(cmd, sizeof(cmd), "A %x", log_addr);
-	return rain_send_and_wait(rain, cmd, "ADR");
-}
-
-static int rain_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
-				    u32 signal_free_time, struct cec_msg *msg)
-{
-	struct rain *rain = cec_get_drvdata(adap);
-	char cmd[2 * CEC_MAX_MSG_SIZE + 16];
-	unsigned int i;
-	int err;
-
-	if (msg->len == 1) {
-		snprintf(cmd, sizeof(cmd), "x%x", cec_msg_destination(msg));
-	} else {
-		char hex[3];
-
-		snprintf(cmd, sizeof(cmd), "x%x %02x ",
-			 cec_msg_destination(msg), msg->msg[1]);
-		for (i = 2; i < msg->len; i++) {
-			snprintf(hex, sizeof(hex), "%02x", msg->msg[i]);
-			strlcat(cmd, hex, sizeof(cmd));
-		}
-	}
-	mutex_lock(&rain->write_lock);
-	err = rain_send(rain, cmd);
-	mutex_unlock(&rain->write_lock);
-	return err;
-}
-
-static const struct cec_adap_ops rain_cec_adap_ops = {
-	.adap_enable = rain_cec_adap_enable,
-	.adap_log_addr = rain_cec_adap_log_addr,
-	.adap_transmit = rain_cec_adap_transmit,
-};
-
-static int rain_connect(struct serio *serio, struct serio_driver *drv)
-{
-	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_PHYS_ADDR | CEC_CAP_MONITOR_ALL;
-	struct rain *rain;
-	int err = -ENOMEM;
-	struct cec_log_addrs log_addrs = {};
-	u16 pa = CEC_PHYS_ADDR_INVALID;
-
-	rain = kzalloc(sizeof(*rain), GFP_KERNEL);
-
-	if (!rain)
-		return -ENOMEM;
-
-	rain->serio = serio;
-	rain->adap = cec_allocate_adapter(&rain_cec_adap_ops, rain,
-					  dev_name(&serio->dev), caps, 1);
-	err = PTR_ERR_OR_ZERO(rain->adap);
-	if (err < 0)
-		goto free_device;
-
-	rain->dev = &serio->dev;
-	serio_set_drvdata(serio, rain);
-	INIT_WORK(&rain->work, rain_irq_work_handler);
-	mutex_init(&rain->write_lock);
-	spin_lock_init(&rain->buf_lock);
-
-	err = serio_open(serio, drv);
-	if (err)
-		goto delete_adap;
-
-	err = rain_setup(rain, serio, &log_addrs, &pa);
-	if (err)
-		goto close_serio;
-
-	err = cec_register_adapter(rain->adap, &serio->dev);
-	if (err < 0)
-		goto close_serio;
-
-	rain->dev = &rain->adap->devnode.dev;
-	return 0;
-
-close_serio:
-	serio_close(serio);
-delete_adap:
-	cec_delete_adapter(rain->adap);
-	serio_set_drvdata(serio, NULL);
-free_device:
-	kfree(rain);
-	return err;
-}
-
-static const struct serio_device_id rain_serio_ids[] = {
-	{
-		.type	= SERIO_RS232,
-		.proto	= SERIO_RAINSHADOW_CEC,
-		.id	= SERIO_ANY,
-		.extra	= SERIO_ANY,
-	},
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(serio, rain_serio_ids);
-
-static struct serio_driver rain_drv = {
-	.driver		= {
-		.name	= "rainshadow-cec",
-	},
-	.description	= "RainShadow Tech HDMI CEC driver",
-	.id_table	= rain_serio_ids,
-	.interrupt	= rain_interrupt,
-	.connect	= rain_connect,
-	.disconnect	= rain_disconnect,
-};
-
-module_serio_driver(rain_drv);
diff --git a/drivers/media/usb/zr364xx/Kconfig b/drivers/media/usb/zr364xx/Kconfig
index 55b06c833667..49b4257487bb 100644
--- a/drivers/media/usb/zr364xx/Kconfig
+++ b/drivers/media/usb/zr364xx/Kconfig
@@ -7,7 +7,7 @@ config USB_ZR364XX
 	help
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port.
-	  See <file:Documentation/media/v4l-drivers/zr364xx.rst> for more info
+	  See <file:Documentation/admin-guide/media/zr364xx.rst> for more info
 	  and list of supported cameras.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig
index 39e3fb30ba0b..bf49f83cb86f 100644
--- a/drivers/media/v4l2-core/Kconfig
+++ b/drivers/media/v4l2-core/Kconfig
@@ -16,6 +16,15 @@ config VIDEO_V4L2_I2C
 	depends on I2C && VIDEO_V4L2
 	default y
 
+config VIDEO_V4L2_SUBDEV_API
+	bool "V4L2 sub-device userspace API"
+	depends on VIDEO_DEV && MEDIA_CONTROLLER
+	help
+	  Enables the V4L2 sub-device pad-level userspace API used to configure
+	  video format, size and frame rate between hardware blocks.
+
+	  This API is mostly used by camera interfaces in embedded platforms.
+
 config VIDEO_ADV_DEBUG
 	bool "Enable advanced debug functionality on V4L2 drivers"
 	help
@@ -31,20 +40,18 @@ config VIDEO_FIXED_MINOR_RANGES
 
 	  When in doubt, say N.
 
-config VIDEO_PCI_SKELETON
-	tristate "Skeleton PCI V4L2 driver"
-	depends on PCI
-	depends on SAMPLES
-	depends on VIDEO_V4L2 && VIDEOBUF2_CORE
-	depends on VIDEOBUF2_MEMOPS && VIDEOBUF2_DMA_CONTIG
-	help
-	  Enable build of the skeleton PCI driver, used as a reference
-	  when developing new drivers.
-
 # Used by drivers that need tuner.ko
 config VIDEO_TUNER
 	tristate
 
+# Used by drivers that need v4l2-jpeg.ko
+config V4L2_JPEG_HELPER
+	tristate
+
+# Used by drivers that need v4l2-h264.ko
+config V4L2_H264
+	tristate
+
 # Used by drivers that need v4l2-mem2mem.ko
 config V4L2_MEM2MEM_DEV
 	tristate
diff --git a/drivers/media/v4l2-core/Makefile b/drivers/media/v4l2-core/Makefile
index 786bd1ec4d1b..2ef0c7c958a2 100644
--- a/drivers/media/v4l2-core/Makefile
+++ b/drivers/media/v4l2-core/Makefile
@@ -21,9 +21,12 @@ obj-$(CONFIG_VIDEO_V4L2) += v4l2-dv-timings.o
 obj-$(CONFIG_VIDEO_TUNER) += tuner.o
 
 obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o
+obj-$(CONFIG_V4L2_H264) += v4l2-h264.o
 
 obj-$(CONFIG_V4L2_FLASH_LED_CLASS) += v4l2-flash-led-class.o
 
+obj-$(CONFIG_V4L2_JPEG_HELPER) += v4l2-jpeg.o
+
 obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
 obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
 obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
index d0e5ebc736f9..9e8eb45a5b03 100644
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -250,9 +250,9 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
 		{ .format = V4L2_PIX_FMT_RGBA32,  .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 		{ .format = V4L2_PIX_FMT_ABGR32,  .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 		{ .format = V4L2_PIX_FMT_BGRA32,  .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
-		{ .format = V4L2_PIX_FMT_GREY,    .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 		{ .format = V4L2_PIX_FMT_RGB565,  .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 		{ .format = V4L2_PIX_FMT_RGB555,  .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_BGR666,  .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 
 		/* YUV packed formats */
 		{ .format = V4L2_PIX_FMT_YUYV,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 },
@@ -274,6 +274,7 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
 		{ .format = V4L2_PIX_FMT_YUV420,  .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
 		{ .format = V4L2_PIX_FMT_YVU420,  .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
 		{ .format = V4L2_PIX_FMT_YUV422P, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 },
+		{ .format = V4L2_PIX_FMT_GREY,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 },
 
 		/* YUV planar formats, non contiguous variant */
 		{ .format = V4L2_PIX_FMT_YUV420M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 },
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 93d33d1db4e8..1c617b42a944 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -336,6 +336,10 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
 		"4.2",
 		"5",
 		"5.1",
+		"5.2",
+		"6.0",
+		"6.1",
+		"6.2",
 		NULL,
 	};
 	static const char * const h264_loop_filter[] = {
@@ -362,6 +366,7 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
 		"Scalable High Intra",
 		"Stereo High",
 		"Multiview High",
+		"Constrained High",
 		NULL,
 	};
 	static const char * const vui_sar_idc[] = {
@@ -3794,7 +3799,8 @@ s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl)
 	struct v4l2_ext_control c;
 
 	/* It's a driver bug if this happens. */
-	WARN_ON(!ctrl->is_int);
+	if (WARN_ON(!ctrl->is_int))
+		return 0;
 	c.value = 0;
 	get_ctrl(ctrl, &c);
 	return c.value;
@@ -3806,7 +3812,8 @@ s64 v4l2_ctrl_g_ctrl_int64(struct v4l2_ctrl *ctrl)
 	struct v4l2_ext_control c;
 
 	/* It's a driver bug if this happens. */
-	WARN_ON(ctrl->is_ptr || ctrl->type != V4L2_CTRL_TYPE_INTEGER64);
+	if (WARN_ON(ctrl->is_ptr || ctrl->type != V4L2_CTRL_TYPE_INTEGER64))
+		return 0;
 	c.value64 = 0;
 	get_ctrl(ctrl, &c);
 	return c.value64;
@@ -4215,7 +4222,8 @@ int __v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val)
 	lockdep_assert_held(ctrl->handler->lock);
 
 	/* It's a driver bug if this happens. */
-	WARN_ON(!ctrl->is_int);
+	if (WARN_ON(!ctrl->is_int))
+		return -EINVAL;
 	ctrl->val = val;
 	return set_ctrl(NULL, ctrl, 0);
 }
@@ -4226,7 +4234,8 @@ int __v4l2_ctrl_s_ctrl_int64(struct v4l2_ctrl *ctrl, s64 val)
 	lockdep_assert_held(ctrl->handler->lock);
 
 	/* It's a driver bug if this happens. */
-	WARN_ON(ctrl->is_ptr || ctrl->type != V4L2_CTRL_TYPE_INTEGER64);
+	if (WARN_ON(ctrl->is_ptr || ctrl->type != V4L2_CTRL_TYPE_INTEGER64))
+		return -EINVAL;
 	*ctrl->p_new.p_s64 = val;
 	return set_ctrl(NULL, ctrl, 0);
 }
@@ -4237,23 +4246,25 @@ int __v4l2_ctrl_s_ctrl_string(struct v4l2_ctrl *ctrl, const char *s)
 	lockdep_assert_held(ctrl->handler->lock);
 
 	/* It's a driver bug if this happens. */
-	WARN_ON(ctrl->type != V4L2_CTRL_TYPE_STRING);
+	if (WARN_ON(ctrl->type != V4L2_CTRL_TYPE_STRING))
+		return -EINVAL;
 	strscpy(ctrl->p_new.p_char, s, ctrl->maximum + 1);
 	return set_ctrl(NULL, ctrl, 0);
 }
 EXPORT_SYMBOL(__v4l2_ctrl_s_ctrl_string);
 
-int __v4l2_ctrl_s_ctrl_area(struct v4l2_ctrl *ctrl,
-			    const struct v4l2_area *area)
+int __v4l2_ctrl_s_ctrl_compound(struct v4l2_ctrl *ctrl,
+				enum v4l2_ctrl_type type, const void *p)
 {
 	lockdep_assert_held(ctrl->handler->lock);
 
 	/* It's a driver bug if this happens. */
-	WARN_ON(ctrl->type != V4L2_CTRL_TYPE_AREA);
-	*ctrl->p_new.p_area = *area;
+	if (WARN_ON(ctrl->type != type))
+		return -EINVAL;
+	memcpy(ctrl->p_new.p, p, ctrl->elems * ctrl->elem_size);
 	return set_ctrl(NULL, ctrl, 0);
 }
-EXPORT_SYMBOL(__v4l2_ctrl_s_ctrl_area);
+EXPORT_SYMBOL(__v4l2_ctrl_s_ctrl_compound);
 
 void v4l2_ctrl_request_complete(struct media_request *req,
 				struct v4l2_ctrl_handler *main_hdl)
diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
index 97f0f8b23b5d..8a1e1b95b379 100644
--- a/drivers/media/v4l2-core/v4l2-fwnode.c
+++ b/drivers/media/v4l2-core/v4l2-fwnode.c
@@ -980,7 +980,7 @@ static int v4l2_fwnode_reference_parse(struct device *dev,
  *
  * THIS EXAMPLE EXISTS MERELY TO DOCUMENT THIS FUNCTION. DO NOT USE IT AS A
  * REFERENCE IN HOW ACPI TABLES SHOULD BE WRITTEN!! See documentation under
- * Documentation/acpi/dsd instead and especially graph.txt,
+ * Documentation/firmware-guide/acpi/dsd/ instead and especially graph.txt,
  * data-node-references.txt and leds.txt .
  *
  *	Scope (\_SB.PCI0.I2C2)
diff --git a/drivers/media/v4l2-core/v4l2-h264.c b/drivers/media/v4l2-core/v4l2-h264.c
new file mode 100644
index 000000000000..edf6225f0522
--- /dev/null
+++ b/drivers/media/v4l2-core/v4l2-h264.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * V4L2 H264 helpers.
+ *
+ * Copyright (C) 2019 Collabora, Ltd.
+ *
+ * Author: Boris Brezillon <boris.brezillon@collabora.com>
+ */
+
+#include <linux/module.h>
+#include <linux/sort.h>
+
+#include <media/v4l2-h264.h>
+
+/**
+ * v4l2_h264_init_reflist_builder() - Initialize a P/B0/B1 reference list
+ *				      builder
+ *
+ * @b: the builder context to initialize
+ * @dec_params: decode parameters control
+ * @slice_params: first slice parameters control
+ * @sps: SPS control
+ * @dpb: DPB to use when creating the reference list
+ */
+void
+v4l2_h264_init_reflist_builder(struct v4l2_h264_reflist_builder *b,
+		const struct v4l2_ctrl_h264_decode_params *dec_params,
+		const struct v4l2_ctrl_h264_slice_params *slice_params,
+		const struct v4l2_ctrl_h264_sps *sps,
+		const struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES])
+{
+	int cur_frame_num, max_frame_num;
+	unsigned int i;
+
+	max_frame_num = 1 << (sps->log2_max_frame_num_minus4 + 4);
+	cur_frame_num = slice_params->frame_num;
+
+	memset(b, 0, sizeof(*b));
+	if (!(slice_params->flags & V4L2_H264_SLICE_FLAG_FIELD_PIC))
+		b->cur_pic_order_count = min(dec_params->bottom_field_order_cnt,
+					     dec_params->top_field_order_cnt);
+	else if (slice_params->flags & V4L2_H264_SLICE_FLAG_BOTTOM_FIELD)
+		b->cur_pic_order_count = dec_params->bottom_field_order_cnt;
+	else
+		b->cur_pic_order_count = dec_params->top_field_order_cnt;
+
+	for (i = 0; i < V4L2_H264_NUM_DPB_ENTRIES; i++) {
+		u32 pic_order_count;
+
+		if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE))
+			continue;
+
+		b->refs[i].pic_num = dpb[i].pic_num;
+		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)
+			b->refs[i].longterm = true;
+
+		/*
+		 * Handle frame_num wraparound as described in section
+		 * '8.2.4.1 Decoding process for picture numbers' of the spec.
+		 * TODO: This logic will have to be adjusted when we start
+		 * supporting interlaced content.
+		 */
+		if (dpb[i].frame_num > cur_frame_num)
+			b->refs[i].frame_num = (int)dpb[i].frame_num -
+					       max_frame_num;
+		else
+			b->refs[i].frame_num = dpb[i].frame_num;
+
+		if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD))
+			pic_order_count = min(dpb[i].top_field_order_cnt,
+					      dpb[i].bottom_field_order_cnt);
+		else if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD)
+			pic_order_count = dpb[i].bottom_field_order_cnt;
+		else
+			pic_order_count = dpb[i].top_field_order_cnt;
+
+		b->refs[i].pic_order_count = pic_order_count;
+		b->unordered_reflist[b->num_valid] = i;
+		b->num_valid++;
+	}
+
+	for (i = b->num_valid; i < ARRAY_SIZE(b->unordered_reflist); i++)
+		b->unordered_reflist[i] = i;
+}
+EXPORT_SYMBOL_GPL(v4l2_h264_init_reflist_builder);
+
+static int v4l2_h264_p_ref_list_cmp(const void *ptra, const void *ptrb,
+				    const void *data)
+{
+	const struct v4l2_h264_reflist_builder *builder = data;
+	u8 idxa, idxb;
+
+	idxa = *((u8 *)ptra);
+	idxb = *((u8 *)ptrb);
+
+	if (WARN_ON(idxa >= V4L2_H264_NUM_DPB_ENTRIES ||
+		    idxb >= V4L2_H264_NUM_DPB_ENTRIES))
+		return 1;
+
+	if (builder->refs[idxa].longterm != builder->refs[idxb].longterm) {
+		/* Short term pics first. */
+		if (!builder->refs[idxa].longterm)
+			return -1;
+		else
+			return 1;
+	}
+
+	/*
+	 * Short term pics in descending pic num order, long term ones in
+	 * ascending order.
+	 */
+	if (!builder->refs[idxa].longterm)
+		return builder->refs[idxb].frame_num <
+		       builder->refs[idxa].frame_num ?
+		       -1 : 1;
+
+	return builder->refs[idxa].pic_num < builder->refs[idxb].pic_num ?
+	       -1 : 1;
+}
+
+static int v4l2_h264_b0_ref_list_cmp(const void *ptra, const void *ptrb,
+				     const void *data)
+{
+	const struct v4l2_h264_reflist_builder *builder = data;
+	s32 poca, pocb;
+	u8 idxa, idxb;
+
+	idxa = *((u8 *)ptra);
+	idxb = *((u8 *)ptrb);
+
+	if (WARN_ON(idxa >= V4L2_H264_NUM_DPB_ENTRIES ||
+		    idxb >= V4L2_H264_NUM_DPB_ENTRIES))
+		return 1;
+
+	if (builder->refs[idxa].longterm != builder->refs[idxb].longterm) {
+		/* Short term pics first. */
+		if (!builder->refs[idxa].longterm)
+			return -1;
+		else
+			return 1;
+	}
+
+	/* Long term pics in ascending pic num order. */
+	if (builder->refs[idxa].longterm)
+		return builder->refs[idxa].pic_num <
+		       builder->refs[idxb].pic_num ?
+		       -1 : 1;
+
+	poca = builder->refs[idxa].pic_order_count;
+	pocb = builder->refs[idxb].pic_order_count;
+
+	/*
+	 * Short term pics with POC < cur POC first in POC descending order
+	 * followed by short term pics with POC > cur POC in POC ascending
+	 * order.
+	 */
+	if ((poca < builder->cur_pic_order_count) !=
+	     (pocb < builder->cur_pic_order_count))
+		return poca < pocb ? -1 : 1;
+	else if (poca < builder->cur_pic_order_count)
+		return pocb < poca ? -1 : 1;
+
+	return poca < pocb ? -1 : 1;
+}
+
+static int v4l2_h264_b1_ref_list_cmp(const void *ptra, const void *ptrb,
+				     const void *data)
+{
+	const struct v4l2_h264_reflist_builder *builder = data;
+	s32 poca, pocb;
+	u8 idxa, idxb;
+
+	idxa = *((u8 *)ptra);
+	idxb = *((u8 *)ptrb);
+
+	if (WARN_ON(idxa >= V4L2_H264_NUM_DPB_ENTRIES ||
+		    idxb >= V4L2_H264_NUM_DPB_ENTRIES))
+		return 1;
+
+	if (builder->refs[idxa].longterm != builder->refs[idxb].longterm) {
+		/* Short term pics first. */
+		if (!builder->refs[idxa].longterm)
+			return -1;
+		else
+			return 1;
+	}
+
+	/* Long term pics in ascending pic num order. */
+	if (builder->refs[idxa].longterm)
+		return builder->refs[idxa].pic_num <
+		       builder->refs[idxb].pic_num ?
+		       -1 : 1;
+
+	poca = builder->refs[idxa].pic_order_count;
+	pocb = builder->refs[idxb].pic_order_count;
+
+	/*
+	 * Short term pics with POC > cur POC first in POC ascending order
+	 * followed by short term pics with POC < cur POC in POC descending
+	 * order.
+	 */
+	if ((poca < builder->cur_pic_order_count) !=
+	    (pocb < builder->cur_pic_order_count))
+		return pocb < poca ? -1 : 1;
+	else if (poca < builder->cur_pic_order_count)
+		return pocb < poca ? -1 : 1;
+
+	return poca < pocb ? -1 : 1;
+}
+
+/**
+ * v4l2_h264_build_p_ref_list() - Build the P reference list
+ *
+ * @builder: reference list builder context
+ * @reflist: 16-bytes array used to store the P reference list. Each entry
+ *	     is an index in the DPB
+ *
+ * This functions builds the P reference lists. This procedure is describe in
+ * section '8.2.4 Decoding process for reference picture lists construction'
+ * of the H264 spec. This function can be used by H264 decoder drivers that
+ * need to pass a P reference list to the hardware.
+ */
+void
+v4l2_h264_build_p_ref_list(const struct v4l2_h264_reflist_builder *builder,
+			   u8 *reflist)
+{
+	memcpy(reflist, builder->unordered_reflist,
+	       sizeof(builder->unordered_reflist[0]) * builder->num_valid);
+	sort_r(reflist, builder->num_valid, sizeof(*reflist),
+	       v4l2_h264_p_ref_list_cmp, NULL, builder);
+}
+EXPORT_SYMBOL_GPL(v4l2_h264_build_p_ref_list);
+
+/**
+ * v4l2_h264_build_b_ref_lists() - Build the B0/B1 reference lists
+ *
+ * @builder: reference list builder context
+ * @b0_reflist: 16-bytes array used to store the B0 reference list. Each entry
+ *		is an index in the DPB
+ * @b1_reflist: 16-bytes array used to store the B1 reference list. Each entry
+ *		is an index in the DPB
+ *
+ * This functions builds the B0/B1 reference lists. This procedure is described
+ * in section '8.2.4 Decoding process for reference picture lists construction'
+ * of the H264 spec. This function can be used by H264 decoder drivers that
+ * need to pass B0/B1 reference lists to the hardware.
+ */
+void
+v4l2_h264_build_b_ref_lists(const struct v4l2_h264_reflist_builder *builder,
+			    u8 *b0_reflist, u8 *b1_reflist)
+{
+	memcpy(b0_reflist, builder->unordered_reflist,
+	       sizeof(builder->unordered_reflist[0]) * builder->num_valid);
+	sort_r(b0_reflist, builder->num_valid, sizeof(*b0_reflist),
+	       v4l2_h264_b0_ref_list_cmp, NULL, builder);
+
+	memcpy(b1_reflist, builder->unordered_reflist,
+	       sizeof(builder->unordered_reflist[0]) * builder->num_valid);
+	sort_r(b1_reflist, builder->num_valid, sizeof(*b1_reflist),
+	       v4l2_h264_b1_ref_list_cmp, NULL, builder);
+
+	if (builder->num_valid > 1 &&
+	    !memcmp(b1_reflist, b0_reflist, builder->num_valid))
+		swap(b1_reflist[0], b1_reflist[1]);
+}
+EXPORT_SYMBOL_GPL(v4l2_h264_build_b_ref_lists);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("V4L2 H264 Helpers");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@collabora.com>");
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index b2ef8e60ea7d..833e79a2cb98 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -2805,13 +2805,11 @@ static struct mutex *v4l2_ioctl_get_lock(struct video_device *vdev,
 {
 	if (_IOC_NR(cmd) >= V4L2_IOCTLS)
 		return vdev->lock;
-#if IS_ENABLED(CONFIG_V4L2_MEM2MEM_DEV)
 	if (vfh && vfh->m2m_ctx &&
 	    (v4l2_ioctls[_IOC_NR(cmd)].flags & INFO_FL_QUEUE)) {
 		if (vfh->m2m_ctx->q_lock)
 			return vfh->m2m_ctx->q_lock;
 	}
-#endif
 	if (vdev->queue && vdev->queue->lock &&
 			(v4l2_ioctls[_IOC_NR(cmd)].flags & INFO_FL_QUEUE))
 		return vdev->queue->lock;
diff --git a/drivers/media/v4l2-core/v4l2-jpeg.c b/drivers/media/v4l2-core/v4l2-jpeg.c
new file mode 100644
index 000000000000..8947fd95c6f1
--- /dev/null
+++ b/drivers/media/v4l2-core/v4l2-jpeg.c
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * V4L2 JPEG header parser helpers.
+ *
+ * Copyright (C) 2019 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
+ *
+ * For reference, see JPEG ITU-T.81 (ISO/IEC 10918-1) [1]
+ *
+ * [1] https://www.w3.org/Graphics/JPEG/itu-t81.pdf
+ */
+
+#include <asm/unaligned.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <media/v4l2-jpeg.h>
+
+MODULE_DESCRIPTION("V4L2 JPEG header parser helpers");
+MODULE_AUTHOR("Philipp Zabel <kernel@pengutronix.de>");
+MODULE_LICENSE("GPL");
+
+/* Table B.1 - Marker code assignments */
+#define SOF0	0xffc0	/* start of frame */
+#define SOF1	0xffc1
+#define SOF2	0xffc2
+#define SOF3	0xffc3
+#define SOF5	0xffc5
+#define SOF7	0xffc7
+#define JPG	0xffc8	/* extensions */
+#define SOF9	0xffc9
+#define SOF11	0xffcb
+#define SOF13	0xffcd
+#define SOF15	0xffcf
+#define DHT	0xffc4	/* huffman table */
+#define DAC	0xffcc	/* arithmetic coding conditioning */
+#define RST0	0xffd0	/* restart */
+#define RST7	0xffd7
+#define SOI	0xffd8	/* start of image */
+#define EOI	0xffd9	/* end of image */
+#define SOS	0xffda	/* start of stream */
+#define DQT	0xffdb	/* quantization table */
+#define DNL	0xffdc	/* number of lines */
+#define DRI	0xffdd	/* restart interval */
+#define DHP	0xffde	/* hierarchical progression */
+#define EXP	0xffdf	/* expand reference */
+#define APP0	0xffe0	/* application data */
+#define APP15	0xffef
+#define JPG0	0xfff0	/* extensions */
+#define JPG13	0xfffd
+#define COM	0xfffe	/* comment */
+#define TEM	0xff01	/* temporary */
+
+/**
+ * struct jpeg_stream - JPEG byte stream
+ * @curr: current position in stream
+ * @end: end position, after last byte
+ */
+struct jpeg_stream {
+	u8 *curr;
+	u8 *end;
+};
+
+/* returns a value that fits into u8, or negative error */
+static int jpeg_get_byte(struct jpeg_stream *stream)
+{
+	if (stream->curr >= stream->end)
+		return -EINVAL;
+
+	return *stream->curr++;
+}
+
+/* returns a value that fits into u16, or negative error */
+static int jpeg_get_word_be(struct jpeg_stream *stream)
+{
+	u16 word;
+
+	if (stream->curr + sizeof(__be16) > stream->end)
+		return -EINVAL;
+
+	word = get_unaligned_be16(stream->curr);
+	stream->curr += sizeof(__be16);
+
+	return word;
+}
+
+static int jpeg_skip(struct jpeg_stream *stream, size_t len)
+{
+	if (stream->curr + len > stream->end)
+		return -EINVAL;
+
+	stream->curr += len;
+
+	return 0;
+}
+
+static int jpeg_next_marker(struct jpeg_stream *stream)
+{
+	int byte;
+	u16 marker = 0;
+
+	while ((byte = jpeg_get_byte(stream)) >= 0) {
+		marker = (marker << 8) | byte;
+		/* skip stuffing bytes and REServed markers */
+		if (marker == TEM || (marker > 0xffbf && marker < 0xffff))
+			return marker;
+	}
+
+	return byte;
+}
+
+/* this does not advance the current position in the stream */
+static int jpeg_reference_segment(struct jpeg_stream *stream,
+				  struct v4l2_jpeg_reference *segment)
+{
+	u16 len;
+
+	if (stream->curr + sizeof(__be16) > stream->end)
+		return -EINVAL;
+
+	len = get_unaligned_be16(stream->curr);
+	if (stream->curr + len > stream->end)
+		return -EINVAL;
+
+	segment->start = stream->curr;
+	segment->length = len;
+
+	return 0;
+}
+
+static int v4l2_jpeg_decode_subsampling(u8 nf, u8 h_v)
+{
+	if (nf == 1)
+		return V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY;
+
+	/* no chroma subsampling for 4-component images */
+	if (nf == 4 && h_v != 0x11)
+		return -EINVAL;
+
+	switch (h_v) {
+	case 0x11:
+		return V4L2_JPEG_CHROMA_SUBSAMPLING_444;
+	case 0x21:
+		return V4L2_JPEG_CHROMA_SUBSAMPLING_422;
+	case 0x22:
+		return V4L2_JPEG_CHROMA_SUBSAMPLING_420;
+	case 0x41:
+		return V4L2_JPEG_CHROMA_SUBSAMPLING_411;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int jpeg_parse_frame_header(struct jpeg_stream *stream, u16 sof_marker,
+				   struct v4l2_jpeg_frame_header *frame_header)
+{
+	int len = jpeg_get_word_be(stream);
+
+	if (len < 0)
+		return len;
+	/* Lf = 8 + 3 * Nf, Nf >= 1 */
+	if (len < 8 + 3)
+		return -EINVAL;
+
+	if (frame_header) {
+		/* Table B.2 - Frame header parameter sizes and values */
+		int p, y, x, nf;
+		int i;
+
+		p = jpeg_get_byte(stream);
+		if (p < 0)
+			return p;
+		/*
+		 * Baseline DCT only supports 8-bit precision.
+		 * Extended sequential DCT also supports 12-bit precision.
+		 */
+		if (p != 8 && (p != 12 || sof_marker != SOF1))
+			return -EINVAL;
+
+		y = jpeg_get_word_be(stream);
+		if (y < 0)
+			return y;
+		if (y == 0)
+			return -EINVAL;
+
+		x = jpeg_get_word_be(stream);
+		if (x < 0)
+			return x;
+		if (x == 0)
+			return -EINVAL;
+
+		nf = jpeg_get_byte(stream);
+		if (nf < 0)
+			return nf;
+		/*
+		 * The spec allows 1 <= Nf <= 255, but we only support up to 4
+		 * components.
+		 */
+		if (nf < 1 || nf > V4L2_JPEG_MAX_COMPONENTS)
+			return -EINVAL;
+		if (len != 8 + 3 * nf)
+			return -EINVAL;
+
+		frame_header->precision = p;
+		frame_header->height = y;
+		frame_header->width = x;
+		frame_header->num_components = nf;
+
+		for (i = 0; i < nf; i++) {
+			struct v4l2_jpeg_frame_component_spec *component;
+			int c, h_v, tq;
+
+			c = jpeg_get_byte(stream);
+			if (c < 0)
+				return c;
+
+			h_v = jpeg_get_byte(stream);
+			if (h_v < 0)
+				return h_v;
+			if (i == 0) {
+				int subs;
+
+				subs = v4l2_jpeg_decode_subsampling(nf, h_v);
+				if (subs < 0)
+					return subs;
+				frame_header->subsampling = subs;
+			} else if (h_v != 0x11) {
+				/* all chroma sampling factors must be 1 */
+				return -EINVAL;
+			}
+
+			tq = jpeg_get_byte(stream);
+			if (tq < 0)
+				return tq;
+
+			component = &frame_header->component[i];
+			component->component_identifier = c;
+			component->horizontal_sampling_factor =
+				(h_v >> 4) & 0xf;
+			component->vertical_sampling_factor = h_v & 0xf;
+			component->quantization_table_selector = tq;
+		}
+	} else {
+		return jpeg_skip(stream, len - 2);
+	}
+
+	return 0;
+}
+
+static int jpeg_parse_scan_header(struct jpeg_stream *stream,
+				  struct v4l2_jpeg_scan_header *scan_header)
+{
+	size_t skip;
+	int len = jpeg_get_word_be(stream);
+
+	if (len < 0)
+		return len;
+	/* Ls = 8 + 3 * Ns, Ns >= 1 */
+	if (len < 6 + 2)
+		return -EINVAL;
+
+	if (scan_header) {
+		int ns;
+		int i;
+
+		ns = jpeg_get_byte(stream);
+		if (ns < 0)
+			return ns;
+		if (ns < 1 || ns > 4 || len != 6 + 2 * ns)
+			return -EINVAL;
+
+		scan_header->num_components = ns;
+
+		for (i = 0; i < ns; i++) {
+			struct v4l2_jpeg_scan_component_spec *component;
+			int cs, td_ta;
+
+			cs = jpeg_get_byte(stream);
+			if (cs < 0)
+				return cs;
+
+			td_ta = jpeg_get_byte(stream);
+			if (td_ta < 0)
+				return td_ta;
+
+			component = &scan_header->component[i];
+			component->component_selector = cs;
+			component->dc_entropy_coding_table_selector =
+				(td_ta >> 4) & 0xf;
+			component->ac_entropy_coding_table_selector =
+				td_ta & 0xf;
+		}
+
+		skip = 3; /* skip Ss, Se, Ah, and Al */
+	} else {
+		skip = len - 2;
+	}
+
+	return jpeg_skip(stream, skip);
+}
+
+/* B.2.4.1 Quantization table-specification syntax */
+static int jpeg_parse_quantization_tables(struct jpeg_stream *stream,
+					  u8 precision,
+					  struct v4l2_jpeg_reference *tables)
+{
+	int len = jpeg_get_word_be(stream);
+
+	if (len < 0)
+		return len;
+	/* Lq = 2 + n * 65 (for baseline DCT), n >= 1 */
+	if (len < 2 + 65)
+		return -EINVAL;
+
+	len -= 2;
+	while (len >= 65) {
+		u8 pq, tq, *qk;
+		int ret;
+		int pq_tq = jpeg_get_byte(stream);
+
+		if (pq_tq < 0)
+			return pq_tq;
+
+		/* quantization table element precision */
+		pq = (pq_tq >> 4) & 0xf;
+		/*
+		 * Only 8-bit Qk values for 8-bit sample precision. Extended
+		 * sequential DCT with 12-bit sample precision also supports
+		 * 16-bit Qk values.
+		 */
+		if (pq != 0 && (pq != 1 || precision != 12))
+			return -EINVAL;
+
+		/* quantization table destination identifier */
+		tq = pq_tq & 0xf;
+		if (tq > 3)
+			return -EINVAL;
+
+		/* quantization table element */
+		qk = stream->curr;
+		ret = jpeg_skip(stream, pq ? 128 : 64);
+		if (ret < 0)
+			return -EINVAL;
+
+		if (tables) {
+			tables[tq].start = qk;
+			tables[tq].length = pq ? 128 : 64;
+		}
+
+		len -= pq ? 129 : 65;
+	}
+
+	return 0;
+}
+
+/* B.2.4.2 Huffman table-specification syntax */
+static int jpeg_parse_huffman_tables(struct jpeg_stream *stream,
+				     struct v4l2_jpeg_reference *tables)
+{
+	int mt;
+	int len = jpeg_get_word_be(stream);
+
+	if (len < 0)
+		return len;
+	/* Table B.5 - Huffman table specification parameter sizes and values */
+	if (len < 2 + 17)
+		return -EINVAL;
+
+	for (len -= 2; len >= 17; len -= 17 + mt) {
+		u8 tc, th, *table;
+		int tc_th = jpeg_get_byte(stream);
+		int i, ret;
+
+		if (tc_th < 0)
+			return tc_th;
+
+		/* table class - 0 = DC, 1 = AC */
+		tc = (tc_th >> 4) & 0xf;
+		if (tc > 1)
+			return -EINVAL;
+
+		/* huffman table destination identifier */
+		th = tc_th & 0xf;
+		/* only two Huffman tables for baseline DCT */
+		if (th > 1)
+			return -EINVAL;
+
+		/* BITS - number of Huffman codes with length i */
+		table = stream->curr;
+		mt = 0;
+		for (i = 0; i < 16; i++) {
+			int li;
+
+			li = jpeg_get_byte(stream);
+			if (li < 0)
+				return li;
+
+			mt += li;
+		}
+		/* HUFFVAL - values associated with each Huffman code */
+		ret = jpeg_skip(stream, mt);
+		if (ret < 0)
+			return ret;
+
+		if (tables) {
+			tables[(tc << 1) | th].start = table;
+			tables[(tc << 1) | th].length = stream->curr - table;
+		}
+	}
+
+	return jpeg_skip(stream, len - 2);
+}
+
+/* B.2.4.4 Restart interval definition syntax */
+static int jpeg_parse_restart_interval(struct jpeg_stream *stream,
+				       u16 *restart_interval)
+{
+	int len = jpeg_get_word_be(stream);
+	int ri;
+
+	if (len < 0)
+		return len;
+	if (len != 4)
+		return -EINVAL;
+
+	ri = jpeg_get_word_be(stream);
+	if (ri < 0)
+		return ri;
+
+	*restart_interval = ri;
+
+	return 0;
+}
+
+static int jpeg_skip_segment(struct jpeg_stream *stream)
+{
+	int len = jpeg_get_word_be(stream);
+
+	if (len < 0)
+		return len;
+	if (len < 2)
+		return -EINVAL;
+
+	return jpeg_skip(stream, len - 2);
+}
+
+/**
+ * jpeg_parse_header - locate marker segments and optionally parse headers
+ * @buf: address of the JPEG buffer, should start with a SOI marker
+ * @len: length of the JPEG buffer
+ * @out: returns marker segment positions and optionally parsed headers
+ *
+ * The out->scan_header pointer must be initialized to NULL or point to a valid
+ * v4l2_jpeg_scan_header structure. The out->huffman_tables and
+ * out->quantization_tables pointers must be initialized to NULL or point to a
+ * valid array of 4 v4l2_jpeg_reference structures each.
+ *
+ * Returns 0 or negative error if parsing failed.
+ */
+int v4l2_jpeg_parse_header(void *buf, size_t len, struct v4l2_jpeg_header *out)
+{
+	struct jpeg_stream stream;
+	int marker;
+	int ret = 0;
+
+	stream.curr = buf;
+	stream.end = stream.curr + len;
+
+	out->num_dht = 0;
+	out->num_dqt = 0;
+
+	/* the first marker must be SOI */
+	marker = jpeg_next_marker(&stream);
+	if (marker < 0)
+		return marker;
+	if (marker != SOI)
+		return -EINVAL;
+
+	/* loop through marker segments */
+	while ((marker = jpeg_next_marker(&stream)) >= 0) {
+		switch (marker) {
+		/* baseline DCT, extended sequential DCT */
+		case SOF0 ... SOF1:
+			ret = jpeg_reference_segment(&stream, &out->sof);
+			if (ret < 0)
+				return ret;
+			ret = jpeg_parse_frame_header(&stream, marker,
+						      &out->frame);
+			break;
+		/* progressive, lossless */
+		case SOF2 ... SOF3:
+		/* differential coding */
+		case SOF5 ... SOF7:
+		/* arithmetic coding */
+		case SOF9 ... SOF11:
+		case SOF13 ... SOF15:
+		case DAC:
+		case TEM:
+			return -EINVAL;
+
+		case DHT:
+			ret = jpeg_reference_segment(&stream,
+					&out->dht[out->num_dht++ % 4]);
+			if (ret < 0)
+				return ret;
+			ret = jpeg_parse_huffman_tables(&stream,
+							out->huffman_tables);
+			break;
+		case DQT:
+			ret = jpeg_reference_segment(&stream,
+					&out->dqt[out->num_dqt++ % 4]);
+			if (ret < 0)
+				return ret;
+			ret = jpeg_parse_quantization_tables(&stream,
+					out->frame.precision,
+					out->quantization_tables);
+			break;
+		case DRI:
+			ret = jpeg_parse_restart_interval(&stream,
+							&out->restart_interval);
+			break;
+
+		case SOS:
+			ret = jpeg_reference_segment(&stream, &out->sos);
+			if (ret < 0)
+				return ret;
+			ret = jpeg_parse_scan_header(&stream, out->scan);
+			/*
+			 * stop parsing, the scan header marks the beginning of
+			 * the entropy coded segment
+			 */
+			out->ecs_offset = stream.curr - (u8 *)buf;
+			return ret;
+
+		/* markers without parameters */
+		case RST0 ... RST7: /* restart */
+		case SOI: /* start of image */
+		case EOI: /* end of image */
+			break;
+
+		/* skip unknown or unsupported marker segments */
+		default:
+			ret = jpeg_skip_segment(&stream);
+			break;
+		}
+		if (ret < 0)
+			return ret;
+	}
+
+	return marker;
+}
+EXPORT_SYMBOL_GPL(v4l2_jpeg_parse_header);
+
+/**
+ * v4l2_jpeg_parse_frame_header - parse frame header
+ * @buf: address of the frame header, after the SOF0 marker
+ * @len: length of the frame header
+ * @frame_header: returns the parsed frame header
+ *
+ * Returns 0 or negative error if parsing failed.
+ */
+int v4l2_jpeg_parse_frame_header(void *buf, size_t len,
+				 struct v4l2_jpeg_frame_header *frame_header)
+{
+	struct jpeg_stream stream;
+
+	stream.curr = buf;
+	stream.end = stream.curr + len;
+	return jpeg_parse_frame_header(&stream, SOF0, frame_header);
+}
+EXPORT_SYMBOL_GPL(v4l2_jpeg_parse_frame_header);
+
+/**
+ * v4l2_jpeg_parse_scan_header - parse scan header
+ * @buf: address of the scan header, after the SOS marker
+ * @len: length of the scan header
+ * @scan_header: returns the parsed scan header
+ *
+ * Returns 0 or negative error if parsing failed.
+ */
+int v4l2_jpeg_parse_scan_header(void *buf, size_t len,
+				struct v4l2_jpeg_scan_header *scan_header)
+{
+	struct jpeg_stream stream;
+
+	stream.curr = buf;
+	stream.end = stream.curr + len;
+	return jpeg_parse_scan_header(&stream, scan_header);
+}
+EXPORT_SYMBOL_GPL(v4l2_jpeg_parse_scan_header);
+
+/**
+ * v4l2_jpeg_parse_quantization_tables - parse quantization tables segment
+ * @buf: address of the quantization table segment, after the DQT marker
+ * @len: length of the quantization table segment
+ * @precision: sample precision (P) in bits per component
+ * @q_tables: returns four references into the buffer for the
+ *            four possible quantization table destinations
+ *
+ * Returns 0 or negative error if parsing failed.
+ */
+int v4l2_jpeg_parse_quantization_tables(void *buf, size_t len, u8 precision,
+					struct v4l2_jpeg_reference *q_tables)
+{
+	struct jpeg_stream stream;
+
+	stream.curr = buf;
+	stream.end = stream.curr + len;
+	return jpeg_parse_quantization_tables(&stream, precision, q_tables);
+}
+EXPORT_SYMBOL_GPL(v4l2_jpeg_parse_quantization_tables);
+
+/**
+ * v4l2_jpeg_parse_huffman_tables - parse huffman tables segment
+ * @buf: address of the Huffman table segment, after the DHT marker
+ * @len: length of the Huffman table segment
+ * @huffman_tables: returns four references into the buffer for the
+ *                  four possible Huffman table destinations, in
+ *                  the order DC0, DC1, AC0, AC1
+ *
+ * Returns 0 or negative error if parsing failed.
+ */
+int v4l2_jpeg_parse_huffman_tables(void *buf, size_t len,
+				   struct v4l2_jpeg_reference *huffman_tables)
+{
+	struct jpeg_stream stream;
+
+	stream.curr = buf;
+	stream.end = stream.curr + len;
+	return jpeg_parse_huffman_tables(&stream, huffman_tables);
+}
+EXPORT_SYMBOL_GPL(v4l2_jpeg_parse_huffman_tables);
diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
index 8986c31176e9..62ac9424c92a 100644
--- a/drivers/media/v4l2-core/v4l2-mem2mem.c
+++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
@@ -504,12 +504,21 @@ void v4l2_m2m_buf_done_and_job_finish(struct v4l2_m2m_dev *m2m_dev,
 
 	if (WARN_ON(!src_buf || !dst_buf))
 		goto unlock;
-	v4l2_m2m_buf_done(src_buf, state);
 	dst_buf->is_held = src_buf->flags & V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF;
 	if (!dst_buf->is_held) {
 		v4l2_m2m_dst_buf_remove(m2m_ctx);
 		v4l2_m2m_buf_done(dst_buf, state);
 	}
+	/*
+	 * If the request API is being used, returning the OUTPUT
+	 * (src) buffer will wake-up any process waiting on the
+	 * request file descriptor.
+	 *
+	 * Therefore, return the CAPTURE (dst) buffer first,
+	 * to avoid signalling the request file descriptor
+	 * before the CAPTURE buffer is done.
+	 */
+	v4l2_m2m_buf_done(src_buf, state);
 	schedule_next = _v4l2_m2m_job_finish(m2m_dev, m2m_ctx);
 unlock:
 	spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags);
diff --git a/drivers/memory/tegra/Kconfig b/drivers/memory/tegra/Kconfig
index fbfbaada61a2..9f0a96bf9ccc 100644
--- a/drivers/memory/tegra/Kconfig
+++ b/drivers/memory/tegra/Kconfig
@@ -36,3 +36,17 @@ config TEGRA124_EMC
 	  Tegra124 chips. The EMC controls the external DRAM on the board.
 	  This driver is required to change memory timings / clock rate for
 	  external memory.
+
+config TEGRA210_EMC_TABLE
+	bool
+	depends on ARCH_TEGRA_210_SOC
+
+config TEGRA210_EMC
+	tristate "NVIDIA Tegra210 External Memory Controller driver"
+	depends on TEGRA_MC && ARCH_TEGRA_210_SOC
+	select TEGRA210_EMC_TABLE
+	help
+	  This driver is for the External Memory Controller (EMC) found on
+	  Tegra210 chips. The EMC controls the external DRAM on the board.
+	  This driver is required to change memory timings / clock rate for
+	  external memory.
diff --git a/drivers/memory/tegra/Makefile b/drivers/memory/tegra/Makefile
index 529d10bc5650..6c1a2ecc6628 100644
--- a/drivers/memory/tegra/Makefile
+++ b/drivers/memory/tegra/Makefile
@@ -13,5 +13,9 @@ obj-$(CONFIG_TEGRA_MC) += tegra-mc.o
 obj-$(CONFIG_TEGRA20_EMC)  += tegra20-emc.o
 obj-$(CONFIG_TEGRA30_EMC)  += tegra30-emc.o
 obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o
+obj-$(CONFIG_TEGRA210_EMC_TABLE) += tegra210-emc-table.o
+obj-$(CONFIG_TEGRA210_EMC) += tegra210-emc.o
 obj-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186.o tegra186-emc.o
 obj-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra186.o tegra186-emc.o
+
+tegra210-emc-y := tegra210-emc-core.o tegra210-emc-cc-r21021.o
diff --git a/drivers/memory/tegra/mc.h b/drivers/memory/tegra/mc.h
index 957c6eb74ff9..afa3ba45c9e6 100644
--- a/drivers/memory/tegra/mc.h
+++ b/drivers/memory/tegra/mc.h
@@ -34,6 +34,7 @@
 #define MC_EMEM_ARB_TIMING_W2W				0xbc
 #define MC_EMEM_ARB_TIMING_R2W				0xc0
 #define MC_EMEM_ARB_TIMING_W2R				0xc4
+#define MC_EMEM_ARB_MISC2				0xc8
 #define MC_EMEM_ARB_DA_TURNS				0xd0
 #define MC_EMEM_ARB_DA_COVERS				0xd4
 #define MC_EMEM_ARB_MISC0				0xd8
diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index 33b8216bac30..d19fb7ae230d 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -1178,11 +1178,11 @@ static void emc_debugfs_init(struct device *dev, struct tegra_emc *emc)
 		return;
 	}
 
-	debugfs_create_file("available_rates", S_IRUGO, emc->debugfs.root, emc,
+	debugfs_create_file("available_rates", 0444, emc->debugfs.root, emc,
 			    &tegra_emc_debug_available_rates_fops);
-	debugfs_create_file("min_rate", S_IRUGO | S_IWUSR, emc->debugfs.root,
+	debugfs_create_file("min_rate", 0644, emc->debugfs.root,
 			    emc, &tegra_emc_debug_min_rate_fops);
-	debugfs_create_file("max_rate", S_IRUGO | S_IWUSR, emc->debugfs.root,
+	debugfs_create_file("max_rate", 0644, emc->debugfs.root,
 			    emc, &tegra_emc_debug_max_rate_fops);
 }
 
diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c
index b16715e9515d..f74dd417c874 100644
--- a/drivers/memory/tegra/tegra20-emc.c
+++ b/drivers/memory/tegra/tegra20-emc.c
@@ -647,11 +647,11 @@ static void tegra_emc_debugfs_init(struct tegra_emc *emc)
 		return;
 	}
 
-	debugfs_create_file("available_rates", S_IRUGO, emc->debugfs.root,
+	debugfs_create_file("available_rates", 0444, emc->debugfs.root,
 			    emc, &tegra_emc_debug_available_rates_fops);
-	debugfs_create_file("min_rate", S_IRUGO | S_IWUSR, emc->debugfs.root,
+	debugfs_create_file("min_rate", 0644, emc->debugfs.root,
 			    emc, &tegra_emc_debug_min_rate_fops);
-	debugfs_create_file("max_rate", S_IRUGO | S_IWUSR, emc->debugfs.root,
+	debugfs_create_file("max_rate", 0644, emc->debugfs.root,
 			    emc, &tegra_emc_debug_max_rate_fops);
 }
 
diff --git a/drivers/memory/tegra/tegra210-emc-cc-r21021.c b/drivers/memory/tegra/tegra210-emc-cc-r21021.c
new file mode 100644
index 000000000000..ff55a17896fa
--- /dev/null
+++ b/drivers/memory/tegra/tegra210-emc-cc-r21021.c
@@ -0,0 +1,1775 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#include <soc/tegra/mc.h>
+
+#include "tegra210-emc.h"
+#include "tegra210-mc.h"
+
+/*
+ * Enable flags for specifying verbosity.
+ */
+#define INFO            (1 << 0)
+#define STEPS           (1 << 1)
+#define SUB_STEPS       (1 << 2)
+#define PRELOCK         (1 << 3)
+#define PRELOCK_STEPS   (1 << 4)
+#define ACTIVE_EN       (1 << 5)
+#define PRAMP_UP        (1 << 6)
+#define PRAMP_DN        (1 << 7)
+#define EMA_WRITES      (1 << 10)
+#define EMA_UPDATES     (1 << 11)
+#define PER_TRAIN       (1 << 16)
+#define CC_PRINT        (1 << 17)
+#define CCFIFO          (1 << 29)
+#define REGS            (1 << 30)
+#define REG_LISTS       (1 << 31)
+
+#define emc_dbg(emc, flags, ...) dev_dbg(emc->dev, __VA_ARGS__)
+
+#define DVFS_CLOCK_CHANGE_VERSION	21021
+#define EMC_PRELOCK_VERSION		2101
+
+enum {
+	DVFS_SEQUENCE = 1,
+	WRITE_TRAINING_SEQUENCE = 2,
+	PERIODIC_TRAINING_SEQUENCE = 3,
+	DVFS_PT1 = 10,
+	DVFS_UPDATE = 11,
+	TRAINING_PT1 = 12,
+	TRAINING_UPDATE = 13,
+	PERIODIC_TRAINING_UPDATE = 14
+};
+
+/*
+ * PTFV defines - basically just indexes into the per table PTFV array.
+ */
+#define PTFV_DQSOSC_MOVAVG_C0D0U0_INDEX		0
+#define PTFV_DQSOSC_MOVAVG_C0D0U1_INDEX		1
+#define PTFV_DQSOSC_MOVAVG_C0D1U0_INDEX		2
+#define PTFV_DQSOSC_MOVAVG_C0D1U1_INDEX		3
+#define PTFV_DQSOSC_MOVAVG_C1D0U0_INDEX		4
+#define PTFV_DQSOSC_MOVAVG_C1D0U1_INDEX		5
+#define PTFV_DQSOSC_MOVAVG_C1D1U0_INDEX		6
+#define PTFV_DQSOSC_MOVAVG_C1D1U1_INDEX		7
+#define PTFV_DVFS_SAMPLES_INDEX			9
+#define PTFV_MOVAVG_WEIGHT_INDEX		10
+#define PTFV_CONFIG_CTRL_INDEX			11
+
+#define PTFV_CONFIG_CTRL_USE_PREVIOUS_EMA	(1 << 0)
+
+/*
+ * Do arithmetic in fixed point.
+ */
+#define MOVAVG_PRECISION_FACTOR		100
+
+/*
+ * The division portion of the average operation.
+ */
+#define __AVERAGE_PTFV(dev)						\
+	({ next->ptfv_list[PTFV_DQSOSC_MOVAVG_ ## dev ## _INDEX] =	\
+	   next->ptfv_list[PTFV_DQSOSC_MOVAVG_ ## dev ## _INDEX] /	\
+	   next->ptfv_list[PTFV_DVFS_SAMPLES_INDEX]; })
+
+/*
+ * Convert val to fixed point and add it to the temporary average.
+ */
+#define __INCREMENT_PTFV(dev, val)					\
+	({ next->ptfv_list[PTFV_DQSOSC_MOVAVG_ ## dev ## _INDEX] +=	\
+	   ((val) * MOVAVG_PRECISION_FACTOR); })
+
+/*
+ * Convert a moving average back to integral form and return the value.
+ */
+#define __MOVAVG_AC(timing, dev)					\
+	((timing)->ptfv_list[PTFV_DQSOSC_MOVAVG_ ## dev ## _INDEX] /	\
+	 MOVAVG_PRECISION_FACTOR)
+
+/* Weighted update. */
+#define __WEIGHTED_UPDATE_PTFV(dev, nval)				\
+	do {								\
+		int w = PTFV_MOVAVG_WEIGHT_INDEX;			\
+		int dqs = PTFV_DQSOSC_MOVAVG_ ## dev ## _INDEX;		\
+									\
+		next->ptfv_list[dqs] =					\
+			((nval * MOVAVG_PRECISION_FACTOR) +		\
+			 (next->ptfv_list[dqs] *			\
+			  next->ptfv_list[w])) /			\
+			(next->ptfv_list[w] + 1);			\
+									\
+		emc_dbg(emc, EMA_UPDATES, "%s: (s=%lu) EMA: %u\n",	\
+			__stringify(dev), nval, next->ptfv_list[dqs]);	\
+	} while (0)
+
+/* Access a particular average. */
+#define __MOVAVG(timing, dev)                      \
+	((timing)->ptfv_list[PTFV_DQSOSC_MOVAVG_ ## dev ## _INDEX])
+
+static u32 update_clock_tree_delay(struct tegra210_emc *emc, int type)
+{
+	bool periodic_training_update = type == PERIODIC_TRAINING_UPDATE;
+	struct tegra210_emc_timing *last = emc->last;
+	struct tegra210_emc_timing *next = emc->next;
+	u32 last_timing_rate_mhz = last->rate / 1000;
+	u32 next_timing_rate_mhz = next->rate / 1000;
+	bool dvfs_update = type == DVFS_UPDATE;
+	s32 tdel = 0, tmdel = 0, adel = 0;
+	bool dvfs_pt1 = type == DVFS_PT1;
+	unsigned long cval = 0;
+	u32 temp[2][2], value;
+	unsigned int i;
+
+	/*
+	 * Dev0 MSB.
+	 */
+	if (dvfs_pt1 || periodic_training_update) {
+		value = tegra210_emc_mrr_read(emc, 2, 19);
+
+		for (i = 0; i < emc->num_channels; i++) {
+			temp[i][0] = (value & 0x00ff) << 8;
+			temp[i][1] = (value & 0xff00) << 0;
+			value >>= 16;
+		}
+
+		/*
+		 * Dev0 LSB.
+		 */
+		value = tegra210_emc_mrr_read(emc, 2, 18);
+
+		for (i = 0; i < emc->num_channels; i++) {
+			temp[i][0] |= (value & 0x00ff) >> 0;
+			temp[i][1] |= (value & 0xff00) >> 8;
+			value >>= 16;
+		}
+	}
+
+	if (dvfs_pt1 || periodic_training_update) {
+		cval = tegra210_emc_actual_osc_clocks(last->run_clocks);
+		cval *= 1000000;
+		cval /= last_timing_rate_mhz * 2 * temp[0][0];
+	}
+
+	if (dvfs_pt1)
+		__INCREMENT_PTFV(C0D0U0, cval);
+	else if (dvfs_update)
+		__AVERAGE_PTFV(C0D0U0);
+	else if (periodic_training_update)
+		__WEIGHTED_UPDATE_PTFV(C0D0U0, cval);
+
+	if (dvfs_update || periodic_training_update) {
+		tdel = next->current_dram_clktree[C0D0U0] -
+				__MOVAVG_AC(next, C0D0U0);
+		tmdel = (tdel < 0) ? -1 * tdel : tdel;
+		adel = tmdel;
+
+		if (tmdel * 128 * next_timing_rate_mhz / 1000000 >
+		    next->tree_margin)
+			next->current_dram_clktree[C0D0U0] =
+				__MOVAVG_AC(next, C0D0U0);
+	}
+
+	if (dvfs_pt1 || periodic_training_update) {
+		cval = tegra210_emc_actual_osc_clocks(last->run_clocks);
+		cval *= 1000000;
+		cval /= last_timing_rate_mhz * 2 * temp[0][1];
+	}
+
+	if (dvfs_pt1)
+		__INCREMENT_PTFV(C0D0U1, cval);
+	else if (dvfs_update)
+		__AVERAGE_PTFV(C0D0U1);
+	else if (periodic_training_update)
+		__WEIGHTED_UPDATE_PTFV(C0D0U1, cval);
+
+	if (dvfs_update || periodic_training_update) {
+		tdel = next->current_dram_clktree[C0D0U1] -
+				__MOVAVG_AC(next, C0D0U1);
+		tmdel = (tdel < 0) ? -1 * tdel : tdel;
+
+		if (tmdel > adel)
+			adel = tmdel;
+
+		if (tmdel * 128 * next_timing_rate_mhz / 1000000 >
+		    next->tree_margin)
+			next->current_dram_clktree[C0D0U1] =
+				__MOVAVG_AC(next, C0D0U1);
+	}
+
+	if (emc->num_channels > 1) {
+		if (dvfs_pt1 || periodic_training_update) {
+			cval = tegra210_emc_actual_osc_clocks(last->run_clocks);
+			cval *= 1000000;
+			cval /= last_timing_rate_mhz * 2 * temp[1][0];
+		}
+
+		if (dvfs_pt1)
+			__INCREMENT_PTFV(C1D0U0, cval);
+		else if (dvfs_update)
+			__AVERAGE_PTFV(C1D0U0);
+		else if (periodic_training_update)
+			__WEIGHTED_UPDATE_PTFV(C1D0U0, cval);
+
+		if (dvfs_update || periodic_training_update) {
+			tdel = next->current_dram_clktree[C1D0U0] -
+					__MOVAVG_AC(next, C1D0U0);
+			tmdel = (tdel < 0) ? -1 * tdel : tdel;
+
+			if (tmdel > adel)
+				adel = tmdel;
+
+			if (tmdel * 128 * next_timing_rate_mhz / 1000000 >
+			    next->tree_margin)
+				next->current_dram_clktree[C1D0U0] =
+					__MOVAVG_AC(next, C1D0U0);
+		}
+
+		if (dvfs_pt1 || periodic_training_update) {
+			cval = tegra210_emc_actual_osc_clocks(last->run_clocks);
+			cval *= 1000000;
+			cval /= last_timing_rate_mhz * 2 * temp[1][1];
+		}
+
+		if (dvfs_pt1)
+			__INCREMENT_PTFV(C1D0U1, cval);
+		else if (dvfs_update)
+			__AVERAGE_PTFV(C1D0U1);
+		else if (periodic_training_update)
+			__WEIGHTED_UPDATE_PTFV(C1D0U1, cval);
+
+		if (dvfs_update || periodic_training_update) {
+			tdel = next->current_dram_clktree[C1D0U1] -
+					__MOVAVG_AC(next, C1D0U1);
+			tmdel = (tdel < 0) ? -1 * tdel : tdel;
+
+			if (tmdel > adel)
+				adel = tmdel;
+
+			if (tmdel * 128 * next_timing_rate_mhz / 1000000 >
+			    next->tree_margin)
+				next->current_dram_clktree[C1D0U1] =
+					__MOVAVG_AC(next, C1D0U1);
+		}
+	}
+
+	if (emc->num_devices < 2)
+		goto done;
+
+	/*
+	 * Dev1 MSB.
+	 */
+	if (dvfs_pt1 || periodic_training_update) {
+		value = tegra210_emc_mrr_read(emc, 1, 19);
+
+		for (i = 0; i < emc->num_channels; i++) {
+			temp[i][0] = (value & 0x00ff) << 8;
+			temp[i][1] = (value & 0xff00) << 0;
+			value >>= 16;
+		}
+
+		/*
+		 * Dev1 LSB.
+		 */
+		value = tegra210_emc_mrr_read(emc, 2, 18);
+
+		for (i = 0; i < emc->num_channels; i++) {
+			temp[i][0] |= (value & 0x00ff) >> 0;
+			temp[i][1] |= (value & 0xff00) >> 8;
+			value >>= 16;
+		}
+	}
+
+	if (dvfs_pt1 || periodic_training_update) {
+		cval = tegra210_emc_actual_osc_clocks(last->run_clocks);
+		cval *= 1000000;
+		cval /= last_timing_rate_mhz * 2 * temp[0][0];
+	}
+
+	if (dvfs_pt1)
+		__INCREMENT_PTFV(C0D1U0, cval);
+	else if (dvfs_update)
+		__AVERAGE_PTFV(C0D1U0);
+	else if (periodic_training_update)
+		__WEIGHTED_UPDATE_PTFV(C0D1U0, cval);
+
+	if (dvfs_update || periodic_training_update) {
+		tdel = next->current_dram_clktree[C0D1U0] -
+				__MOVAVG_AC(next, C0D1U0);
+		tmdel = (tdel < 0) ? -1 * tdel : tdel;
+
+		if (tmdel > adel)
+			adel = tmdel;
+
+		if (tmdel * 128 * next_timing_rate_mhz / 1000000 >
+		    next->tree_margin)
+			next->current_dram_clktree[C0D1U0] =
+				__MOVAVG_AC(next, C0D1U0);
+	}
+
+	if (dvfs_pt1 || periodic_training_update) {
+		cval = tegra210_emc_actual_osc_clocks(last->run_clocks);
+		cval *= 1000000;
+		cval /= last_timing_rate_mhz * 2 * temp[0][1];
+	}
+
+	if (dvfs_pt1)
+		__INCREMENT_PTFV(C0D1U1, cval);
+	else if (dvfs_update)
+		__AVERAGE_PTFV(C0D1U1);
+	else if (periodic_training_update)
+		__WEIGHTED_UPDATE_PTFV(C0D1U1, cval);
+
+	if (dvfs_update || periodic_training_update) {
+		tdel = next->current_dram_clktree[C0D1U1] -
+				__MOVAVG_AC(next, C0D1U1);
+		tmdel = (tdel < 0) ? -1 * tdel : tdel;
+
+		if (tmdel > adel)
+			adel = tmdel;
+
+		if (tmdel * 128 * next_timing_rate_mhz / 1000000 >
+		    next->tree_margin)
+			next->current_dram_clktree[C0D1U1] =
+				__MOVAVG_AC(next, C0D1U1);
+	}
+
+	if (emc->num_channels > 1) {
+		if (dvfs_pt1 || periodic_training_update) {
+			cval = tegra210_emc_actual_osc_clocks(last->run_clocks);
+			cval *= 1000000;
+			cval /= last_timing_rate_mhz * 2 * temp[1][0];
+		}
+
+		if (dvfs_pt1)
+			__INCREMENT_PTFV(C1D1U0, cval);
+		else if (dvfs_update)
+			__AVERAGE_PTFV(C1D1U0);
+		else if (periodic_training_update)
+			__WEIGHTED_UPDATE_PTFV(C1D1U0, cval);
+
+		if (dvfs_update || periodic_training_update) {
+			tdel = next->current_dram_clktree[C1D1U0] -
+					__MOVAVG_AC(next, C1D1U0);
+			tmdel = (tdel < 0) ? -1 * tdel : tdel;
+
+			if (tmdel > adel)
+				adel = tmdel;
+
+			if (tmdel * 128 * next_timing_rate_mhz / 1000000 >
+			    next->tree_margin)
+				next->current_dram_clktree[C1D1U0] =
+					__MOVAVG_AC(next, C1D1U0);
+		}
+
+		if (dvfs_pt1 || periodic_training_update) {
+			cval = tegra210_emc_actual_osc_clocks(last->run_clocks);
+			cval *= 1000000;
+			cval /= last_timing_rate_mhz * 2 * temp[1][1];
+		}
+
+		if (dvfs_pt1)
+			__INCREMENT_PTFV(C1D1U1, cval);
+		else if (dvfs_update)
+			__AVERAGE_PTFV(C1D1U1);
+		else if (periodic_training_update)
+			__WEIGHTED_UPDATE_PTFV(C1D1U1, cval);
+
+		if (dvfs_update || periodic_training_update) {
+			tdel = next->current_dram_clktree[C1D1U1] -
+					__MOVAVG_AC(next, C1D1U1);
+			tmdel = (tdel < 0) ? -1 * tdel : tdel;
+
+			if (tmdel > adel)
+				adel = tmdel;
+
+			if (tmdel * 128 * next_timing_rate_mhz / 1000000 >
+			    next->tree_margin)
+				next->current_dram_clktree[C1D1U1] =
+					__MOVAVG_AC(next, C1D1U1);
+		}
+	}
+
+done:
+	return adel;
+}
+
+static u32 periodic_compensation_handler(struct tegra210_emc *emc, u32 type,
+					 struct tegra210_emc_timing *last,
+					 struct tegra210_emc_timing *next)
+{
+#define __COPY_EMA(nt, lt, dev)						\
+	({ __MOVAVG(nt, dev) = __MOVAVG(lt, dev) *			\
+	   (nt)->ptfv_list[PTFV_DVFS_SAMPLES_INDEX]; })
+
+	u32 i, adel = 0, samples = next->ptfv_list[PTFV_DVFS_SAMPLES_INDEX];
+	u32 delay;
+
+	delay = tegra210_emc_actual_osc_clocks(last->run_clocks);
+	delay *= 1000;
+	delay = 2 + (delay / last->rate);
+
+	if (!next->periodic_training)
+		return 0;
+
+	if (type == DVFS_SEQUENCE) {
+		if (last->periodic_training &&
+		    (next->ptfv_list[PTFV_CONFIG_CTRL_INDEX] &
+		     PTFV_CONFIG_CTRL_USE_PREVIOUS_EMA)) {
+			/*
+			 * If the previous frequency was using periodic
+			 * calibration then we can reuse the previous
+			 * frequencies EMA data.
+			 */
+			__COPY_EMA(next, last, C0D0U0);
+			__COPY_EMA(next, last, C0D0U1);
+			__COPY_EMA(next, last, C1D0U0);
+			__COPY_EMA(next, last, C1D0U1);
+			__COPY_EMA(next, last, C0D1U0);
+			__COPY_EMA(next, last, C0D1U1);
+			__COPY_EMA(next, last, C1D1U0);
+			__COPY_EMA(next, last, C1D1U1);
+		} else {
+			/* Reset the EMA.*/
+			__MOVAVG(next, C0D0U0) = 0;
+			__MOVAVG(next, C0D0U1) = 0;
+			__MOVAVG(next, C1D0U0) = 0;
+			__MOVAVG(next, C1D0U1) = 0;
+			__MOVAVG(next, C0D1U0) = 0;
+			__MOVAVG(next, C0D1U1) = 0;
+			__MOVAVG(next, C1D1U0) = 0;
+			__MOVAVG(next, C1D1U1) = 0;
+
+			for (i = 0; i < samples; i++) {
+				tegra210_emc_start_periodic_compensation(emc);
+				udelay(delay);
+
+				/*
+				 * Generate next sample of data.
+				 */
+				adel = update_clock_tree_delay(emc, DVFS_PT1);
+			}
+		}
+
+		/*
+		 * Seems like it should be part of the
+		 * 'if (last_timing->periodic_training)' conditional
+		 * since is already done for the else clause.
+		 */
+		adel = update_clock_tree_delay(emc, DVFS_UPDATE);
+	}
+
+	if (type == PERIODIC_TRAINING_SEQUENCE) {
+		tegra210_emc_start_periodic_compensation(emc);
+		udelay(delay);
+
+		adel = update_clock_tree_delay(emc, PERIODIC_TRAINING_UPDATE);
+	}
+
+	return adel;
+}
+
+static u32 tegra210_emc_r21021_periodic_compensation(struct tegra210_emc *emc)
+{
+	u32 emc_cfg, emc_cfg_o, emc_cfg_update, del, value;
+	u32 list[] = {
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3,
+		EMC_DATA_BRLSHFT_0,
+		EMC_DATA_BRLSHFT_1
+	};
+	struct tegra210_emc_timing *last = emc->last;
+	unsigned int items = ARRAY_SIZE(list), i;
+	unsigned long delay;
+
+	if (last->periodic_training) {
+		emc_dbg(emc, PER_TRAIN, "Periodic training starting\n");
+
+		value = emc_readl(emc, EMC_DBG);
+		emc_cfg_o = emc_readl(emc, EMC_CFG);
+		emc_cfg = emc_cfg_o & ~(EMC_CFG_DYN_SELF_REF |
+					EMC_CFG_DRAM_ACPD |
+					EMC_CFG_DRAM_CLKSTOP_PD |
+					EMC_CFG_DRAM_CLKSTOP_PD);
+
+
+		/*
+		 * 1. Power optimizations should be off.
+		 */
+		emc_writel(emc, emc_cfg, EMC_CFG);
+
+		/* Does emc_timing_update() for above changes. */
+		tegra210_emc_dll_disable(emc);
+
+		for (i = 0; i < emc->num_channels; i++)
+			tegra210_emc_wait_for_update(emc, i, EMC_EMC_STATUS,
+						     EMC_EMC_STATUS_DRAM_IN_POWERDOWN_MASK,
+						     0);
+
+		for (i = 0; i < emc->num_channels; i++)
+			tegra210_emc_wait_for_update(emc, i, EMC_EMC_STATUS,
+						     EMC_EMC_STATUS_DRAM_IN_SELF_REFRESH_MASK,
+						     0);
+
+		emc_cfg_update = value = emc_readl(emc, EMC_CFG_UPDATE);
+		value &= ~EMC_CFG_UPDATE_UPDATE_DLL_IN_UPDATE_MASK;
+		value |= (2 << EMC_CFG_UPDATE_UPDATE_DLL_IN_UPDATE_SHIFT);
+		emc_writel(emc, value, EMC_CFG_UPDATE);
+
+		/*
+		 * 2. osc kick off - this assumes training and dvfs have set
+		 *    correct MR23.
+		 */
+		tegra210_emc_start_periodic_compensation(emc);
+
+		/*
+		 * 3. Let dram capture its clock tree delays.
+		 */
+		delay = tegra210_emc_actual_osc_clocks(last->run_clocks);
+		delay *= 1000;
+		delay /= last->rate + 1;
+		udelay(delay);
+
+		/*
+		 * 4. Check delta wrt previous values (save value if margin
+		 *    exceeds what is set in table).
+		 */
+		del = periodic_compensation_handler(emc,
+						    PERIODIC_TRAINING_SEQUENCE,
+						    last, last);
+
+		/*
+		 * 5. Apply compensation w.r.t. trained values (if clock tree
+		 *    has drifted more than the set margin).
+		 */
+		if (last->tree_margin < ((del * 128 * (last->rate / 1000)) / 1000000)) {
+			for (i = 0; i < items; i++) {
+				value = tegra210_emc_compensate(last, list[i]);
+				emc_dbg(emc, EMA_WRITES, "0x%08x <= 0x%08x\n",
+					list[i], value);
+				emc_writel(emc, value, list[i]);
+			}
+		}
+
+		emc_writel(emc, emc_cfg_o, EMC_CFG);
+
+		/*
+		 * 6. Timing update actally applies the new trimmers.
+		 */
+		tegra210_emc_timing_update(emc);
+
+		/* 6.1. Restore the UPDATE_DLL_IN_UPDATE field. */
+		emc_writel(emc, emc_cfg_update, EMC_CFG_UPDATE);
+
+		/* 6.2. Restore the DLL. */
+		tegra210_emc_dll_enable(emc);
+	}
+
+	return 0;
+}
+
+/*
+ * Do the clock change sequence.
+ */
+static void tegra210_emc_r21021_set_clock(struct tegra210_emc *emc, u32 clksrc)
+{
+	/* state variables */
+	static bool fsp_for_next_freq;
+	/* constant configuration parameters */
+	const bool save_restore_clkstop_pd = true;
+	const u32 zqcal_before_cc_cutoff = 2400;
+	const bool cya_allow_ref_cc = false;
+	const bool cya_issue_pc_ref = false;
+	const bool opt_cc_short_zcal = true;
+	const bool ref_b4_sref_en = false;
+	const u32 tZQCAL_lpddr4 = 1000000;
+	const bool opt_short_zcal = true;
+	const bool opt_do_sw_qrst = true;
+	const u32 opt_dvfs_mode = MAN_SR;
+	/*
+	 * This is the timing table for the source frequency. It does _not_
+	 * necessarily correspond to the actual timing values in the EMC at the
+	 * moment. If the boot BCT differs from the table then this can happen.
+	 * However, we need it for accessing the dram_timings (which are not
+	 * really registers) array for the current frequency.
+	 */
+	struct tegra210_emc_timing *fake, *last = emc->last, *next = emc->next;
+	u32 tRTM, RP_war, R2P_war, TRPab_war, deltaTWATM, W2P_war, tRPST;
+	u32 mr13_flip_fspwr, mr13_flip_fspop, ramp_up_wait, ramp_down_wait;
+	u32 zq_wait_long, zq_latch_dvfs_wait_time, tZQCAL_lpddr4_fc_adj;
+	u32 emc_auto_cal_config, auto_cal_en, emc_cfg, emc_sel_dpd_ctrl;
+	u32 tFC_lpddr4 = 1000 * next->dram_timings[T_FC_LPDDR4];
+	u32 bg_reg_mode_change, enable_bglp_reg, enable_bg_reg;
+	bool opt_zcal_en_cc = false, is_lpddr3 = false;
+	bool compensate_trimmer_applicable = false;
+	u32 emc_dbg, emc_cfg_pipe_clk, emc_pin;
+	u32 src_clk_period, dst_clk_period; /* in picoseconds */
+	bool shared_zq_resistor = false;
+	u32 value, dram_type;
+	u32 opt_dll_mode = 0;
+	unsigned long delay;
+	unsigned int i;
+
+	emc_dbg(emc, INFO, "Running clock change.\n");
+
+	/* XXX fake == last */
+	fake = tegra210_emc_find_timing(emc, last->rate * 1000UL);
+	fsp_for_next_freq = !fsp_for_next_freq;
+
+	value = emc_readl(emc, EMC_FBIO_CFG5) & EMC_FBIO_CFG5_DRAM_TYPE_MASK;
+	dram_type = value >> EMC_FBIO_CFG5_DRAM_TYPE_SHIFT;
+
+	if (last->burst_regs[EMC_ZCAL_WAIT_CNT_INDEX] & BIT(31))
+		shared_zq_resistor = true;
+
+	if ((next->burst_regs[EMC_ZCAL_INTERVAL_INDEX] != 0 &&
+	     last->burst_regs[EMC_ZCAL_INTERVAL_INDEX] == 0) ||
+	    dram_type == DRAM_TYPE_LPDDR4)
+		opt_zcal_en_cc = true;
+
+	if (dram_type == DRAM_TYPE_DDR3)
+		opt_dll_mode = tegra210_emc_get_dll_state(next);
+
+	if ((next->burst_regs[EMC_FBIO_CFG5_INDEX] & BIT(25)) &&
+	    (dram_type == DRAM_TYPE_LPDDR2))
+		is_lpddr3 = true;
+
+	emc_readl(emc, EMC_CFG);
+	emc_readl(emc, EMC_AUTO_CAL_CONFIG);
+
+	src_clk_period = 1000000000 / last->rate;
+	dst_clk_period = 1000000000 / next->rate;
+
+	if (dst_clk_period <= zqcal_before_cc_cutoff)
+		tZQCAL_lpddr4_fc_adj = tZQCAL_lpddr4 - tFC_lpddr4;
+	else
+		tZQCAL_lpddr4_fc_adj = tZQCAL_lpddr4;
+
+	tZQCAL_lpddr4_fc_adj /= dst_clk_period;
+
+	emc_dbg = emc_readl(emc, EMC_DBG);
+	emc_pin = emc_readl(emc, EMC_PIN);
+	emc_cfg_pipe_clk = emc_readl(emc, EMC_CFG_PIPE_CLK);
+
+	emc_cfg = next->burst_regs[EMC_CFG_INDEX];
+	emc_cfg &= ~(EMC_CFG_DYN_SELF_REF | EMC_CFG_DRAM_ACPD |
+		     EMC_CFG_DRAM_CLKSTOP_SR | EMC_CFG_DRAM_CLKSTOP_PD);
+	emc_sel_dpd_ctrl = next->emc_sel_dpd_ctrl;
+	emc_sel_dpd_ctrl &= ~(EMC_SEL_DPD_CTRL_CLK_SEL_DPD_EN |
+			      EMC_SEL_DPD_CTRL_CA_SEL_DPD_EN |
+			      EMC_SEL_DPD_CTRL_RESET_SEL_DPD_EN |
+			      EMC_SEL_DPD_CTRL_ODT_SEL_DPD_EN |
+			      EMC_SEL_DPD_CTRL_DATA_SEL_DPD_EN);
+
+	emc_dbg(emc, INFO, "Clock change version: %d\n",
+		DVFS_CLOCK_CHANGE_VERSION);
+	emc_dbg(emc, INFO, "DRAM type = %d\n", dram_type);
+	emc_dbg(emc, INFO, "DRAM dev #: %u\n", emc->num_devices);
+	emc_dbg(emc, INFO, "Next EMC clksrc: 0x%08x\n", clksrc);
+	emc_dbg(emc, INFO, "DLL clksrc:      0x%08x\n", next->dll_clk_src);
+	emc_dbg(emc, INFO, "last rate: %u, next rate %u\n", last->rate,
+		next->rate);
+	emc_dbg(emc, INFO, "last period: %u, next period: %u\n",
+		src_clk_period, dst_clk_period);
+	emc_dbg(emc, INFO, "  shared_zq_resistor: %d\n", !!shared_zq_resistor);
+	emc_dbg(emc, INFO, "  num_channels: %u\n", emc->num_channels);
+	emc_dbg(emc, INFO, "  opt_dll_mode: %d\n", opt_dll_mode);
+
+	/*
+	 * Step 1:
+	 *   Pre DVFS SW sequence.
+	 */
+	emc_dbg(emc, STEPS, "Step 1\n");
+	emc_dbg(emc, STEPS, "Step 1.1: Disable DLL temporarily.\n");
+
+	value = emc_readl(emc, EMC_CFG_DIG_DLL);
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_EN;
+	emc_writel(emc, value, EMC_CFG_DIG_DLL);
+
+	tegra210_emc_timing_update(emc);
+
+	for (i = 0; i < emc->num_channels; i++)
+		tegra210_emc_wait_for_update(emc, i, EMC_CFG_DIG_DLL,
+					     EMC_CFG_DIG_DLL_CFG_DLL_EN, 0);
+
+	emc_dbg(emc, STEPS, "Step 1.2: Disable AUTOCAL temporarily.\n");
+
+	emc_auto_cal_config = next->emc_auto_cal_config;
+	auto_cal_en = emc_auto_cal_config & EMC_AUTO_CAL_CONFIG_AUTO_CAL_ENABLE;
+	emc_auto_cal_config &= ~EMC_AUTO_CAL_CONFIG_AUTO_CAL_START;
+	emc_auto_cal_config |= EMC_AUTO_CAL_CONFIG_AUTO_CAL_MEASURE_STALL;
+	emc_auto_cal_config |= EMC_AUTO_CAL_CONFIG_AUTO_CAL_UPDATE_STALL;
+	emc_auto_cal_config |= auto_cal_en;
+	emc_writel(emc, emc_auto_cal_config, EMC_AUTO_CAL_CONFIG);
+	emc_readl(emc, EMC_AUTO_CAL_CONFIG); /* Flush write. */
+
+	emc_dbg(emc, STEPS, "Step 1.3: Disable other power features.\n");
+
+	tegra210_emc_set_shadow_bypass(emc, ACTIVE);
+	emc_writel(emc, emc_cfg, EMC_CFG);
+	emc_writel(emc, emc_sel_dpd_ctrl, EMC_SEL_DPD_CTRL);
+	tegra210_emc_set_shadow_bypass(emc, ASSEMBLY);
+
+	if (next->periodic_training) {
+		tegra210_emc_reset_dram_clktree_values(next);
+
+		for (i = 0; i < emc->num_channels; i++)
+			tegra210_emc_wait_for_update(emc, i, EMC_EMC_STATUS,
+						     EMC_EMC_STATUS_DRAM_IN_POWERDOWN_MASK,
+						     0);
+
+		for (i = 0; i < emc->num_channels; i++)
+			tegra210_emc_wait_for_update(emc, i, EMC_EMC_STATUS,
+						     EMC_EMC_STATUS_DRAM_IN_SELF_REFRESH_MASK,
+						     0);
+
+		tegra210_emc_start_periodic_compensation(emc);
+
+		delay = 1000 * tegra210_emc_actual_osc_clocks(last->run_clocks);
+		udelay((delay / last->rate) + 2);
+
+		value = periodic_compensation_handler(emc, DVFS_SEQUENCE, fake,
+						      next);
+		value = (value * 128 * next->rate / 1000) / 1000000;
+
+		if (next->periodic_training && value > next->tree_margin)
+			compensate_trimmer_applicable = true;
+	}
+
+	emc_writel(emc, EMC_INTSTATUS_CLKCHANGE_COMPLETE, EMC_INTSTATUS);
+	tegra210_emc_set_shadow_bypass(emc, ACTIVE);
+	emc_writel(emc, emc_cfg, EMC_CFG);
+	emc_writel(emc, emc_sel_dpd_ctrl, EMC_SEL_DPD_CTRL);
+	emc_writel(emc, emc_cfg_pipe_clk | EMC_CFG_PIPE_CLK_CLK_ALWAYS_ON,
+		   EMC_CFG_PIPE_CLK);
+	emc_writel(emc, next->emc_fdpd_ctrl_cmd_no_ramp &
+			~EMC_FDPD_CTRL_CMD_NO_RAMP_CMD_DPD_NO_RAMP_ENABLE,
+		   EMC_FDPD_CTRL_CMD_NO_RAMP);
+
+	bg_reg_mode_change =
+		((next->burst_regs[EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+		  EMC_PMACRO_BG_BIAS_CTRL_0_BGLP_E_PWRD) ^
+		 (last->burst_regs[EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+		  EMC_PMACRO_BG_BIAS_CTRL_0_BGLP_E_PWRD)) ||
+		((next->burst_regs[EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+		  EMC_PMACRO_BG_BIAS_CTRL_0_BG_E_PWRD) ^
+		 (last->burst_regs[EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+		  EMC_PMACRO_BG_BIAS_CTRL_0_BG_E_PWRD));
+	enable_bglp_reg =
+		(next->burst_regs[EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+		 EMC_PMACRO_BG_BIAS_CTRL_0_BGLP_E_PWRD) == 0;
+	enable_bg_reg =
+		(next->burst_regs[EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+		 EMC_PMACRO_BG_BIAS_CTRL_0_BG_E_PWRD) == 0;
+
+	if (bg_reg_mode_change) {
+		if (enable_bg_reg)
+			emc_writel(emc, last->burst_regs
+				   [EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+				   ~EMC_PMACRO_BG_BIAS_CTRL_0_BG_E_PWRD,
+				   EMC_PMACRO_BG_BIAS_CTRL_0);
+
+		if (enable_bglp_reg)
+			emc_writel(emc, last->burst_regs
+				   [EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+				   ~EMC_PMACRO_BG_BIAS_CTRL_0_BGLP_E_PWRD,
+				   EMC_PMACRO_BG_BIAS_CTRL_0);
+	}
+
+	/* Check if we need to turn on VREF generator. */
+	if ((((last->burst_regs[EMC_PMACRO_DATA_PAD_TX_CTRL_INDEX] &
+	       EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_E_IVREF) == 0) &&
+	     ((next->burst_regs[EMC_PMACRO_DATA_PAD_TX_CTRL_INDEX] &
+	       EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_E_IVREF) == 1)) ||
+	    (((last->burst_regs[EMC_PMACRO_DATA_PAD_TX_CTRL_INDEX] &
+	       EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQS_E_IVREF) == 0) &&
+	     ((next->burst_regs[EMC_PMACRO_DATA_PAD_TX_CTRL_INDEX] &
+	       EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQS_E_IVREF) != 0))) {
+		u32 pad_tx_ctrl =
+		    next->burst_regs[EMC_PMACRO_DATA_PAD_TX_CTRL_INDEX];
+		u32 last_pad_tx_ctrl =
+		    last->burst_regs[EMC_PMACRO_DATA_PAD_TX_CTRL_INDEX];
+		u32 next_dq_e_ivref, next_dqs_e_ivref;
+
+		next_dqs_e_ivref = pad_tx_ctrl &
+				   EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQS_E_IVREF;
+		next_dq_e_ivref = pad_tx_ctrl &
+				  EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_E_IVREF;
+		value = (last_pad_tx_ctrl &
+				~EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_E_IVREF &
+				~EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQS_E_IVREF) |
+			next_dq_e_ivref | next_dqs_e_ivref;
+		emc_writel(emc, value, EMC_PMACRO_DATA_PAD_TX_CTRL);
+		udelay(1);
+	} else if (bg_reg_mode_change) {
+		udelay(1);
+	}
+
+	tegra210_emc_set_shadow_bypass(emc, ASSEMBLY);
+
+	/*
+	 * Step 2:
+	 *   Prelock the DLL.
+	 */
+	emc_dbg(emc, STEPS, "Step 2\n");
+
+	if (next->burst_regs[EMC_CFG_DIG_DLL_INDEX] &
+	    EMC_CFG_DIG_DLL_CFG_DLL_EN) {
+		emc_dbg(emc, INFO, "Prelock enabled for target frequency.\n");
+		value = tegra210_emc_dll_prelock(emc, clksrc);
+		emc_dbg(emc, INFO, "DLL out: 0x%03x\n", value);
+	} else {
+		emc_dbg(emc, INFO, "Disabling DLL for target frequency.\n");
+		tegra210_emc_dll_disable(emc);
+	}
+
+	/*
+	 * Step 3:
+	 *   Prepare autocal for the clock change.
+	 */
+	emc_dbg(emc, STEPS, "Step 3\n");
+
+	tegra210_emc_set_shadow_bypass(emc, ACTIVE);
+	emc_writel(emc, next->emc_auto_cal_config2, EMC_AUTO_CAL_CONFIG2);
+	emc_writel(emc, next->emc_auto_cal_config3, EMC_AUTO_CAL_CONFIG3);
+	emc_writel(emc, next->emc_auto_cal_config4, EMC_AUTO_CAL_CONFIG4);
+	emc_writel(emc, next->emc_auto_cal_config5, EMC_AUTO_CAL_CONFIG5);
+	emc_writel(emc, next->emc_auto_cal_config6, EMC_AUTO_CAL_CONFIG6);
+	emc_writel(emc, next->emc_auto_cal_config7, EMC_AUTO_CAL_CONFIG7);
+	emc_writel(emc, next->emc_auto_cal_config8, EMC_AUTO_CAL_CONFIG8);
+	tegra210_emc_set_shadow_bypass(emc, ASSEMBLY);
+
+	emc_auto_cal_config |= (EMC_AUTO_CAL_CONFIG_AUTO_CAL_COMPUTE_START |
+				auto_cal_en);
+	emc_writel(emc, emc_auto_cal_config, EMC_AUTO_CAL_CONFIG);
+
+	/*
+	 * Step 4:
+	 *   Update EMC_CFG. (??)
+	 */
+	emc_dbg(emc, STEPS, "Step 4\n");
+
+	if (src_clk_period > 50000 && dram_type == DRAM_TYPE_LPDDR4)
+		ccfifo_writel(emc, 1, EMC_SELF_REF, 0);
+	else
+		emc_writel(emc, next->emc_cfg_2, EMC_CFG_2);
+
+	/*
+	 * Step 5:
+	 *   Prepare reference variables for ZQCAL regs.
+	 */
+	emc_dbg(emc, STEPS, "Step 5\n");
+
+	if (dram_type == DRAM_TYPE_LPDDR4)
+		zq_wait_long = max((u32)1, div_o3(1000000, dst_clk_period));
+	else if (dram_type == DRAM_TYPE_LPDDR2 || is_lpddr3)
+		zq_wait_long = max(next->min_mrs_wait,
+				   div_o3(360000, dst_clk_period)) + 4;
+	else if (dram_type == DRAM_TYPE_DDR3)
+		zq_wait_long = max((u32)256,
+				   div_o3(320000, dst_clk_period) + 2);
+	else
+		zq_wait_long = 0;
+
+	/*
+	 * Step 6:
+	 *   Training code - removed.
+	 */
+	emc_dbg(emc, STEPS, "Step 6\n");
+
+	/*
+	 * Step 7:
+	 *   Program FSP reference registers and send MRWs to new FSPWR.
+	 */
+	emc_dbg(emc, STEPS, "Step 7\n");
+	emc_dbg(emc, SUB_STEPS, "Step 7.1: Bug 200024907 - Patch RP R2P");
+
+	/* WAR 200024907 */
+	if (dram_type == DRAM_TYPE_LPDDR4) {
+		u32 nRTP = 16;
+
+		if (src_clk_period >= 1000000 / 1866) /* 535.91 ps */
+			nRTP = 14;
+
+		if (src_clk_period >= 1000000 / 1600) /* 625.00 ps */
+			nRTP = 12;
+
+		if (src_clk_period >= 1000000 / 1333) /* 750.19 ps */
+			nRTP = 10;
+
+		if (src_clk_period >= 1000000 / 1066) /* 938.09 ps */
+			nRTP = 8;
+
+		deltaTWATM = max_t(u32, div_o3(7500, src_clk_period), 8);
+
+		/*
+		 * Originally there was a + .5 in the tRPST calculation.
+		 * However since we can't do FP in the kernel and the tRTM
+		 * computation was in a floating point ceiling function, adding
+		 * one to tRTP should be ok. There is no other source of non
+		 * integer values, so the result was always going to be
+		 * something for the form: f_ceil(N + .5) = N + 1;
+		 */
+		tRPST = (last->emc_mrw & 0x80) >> 7;
+		tRTM = fake->dram_timings[RL] + div_o3(3600, src_clk_period) +
+			max_t(u32, div_o3(7500, src_clk_period), 8) + tRPST +
+			1 + nRTP;
+
+		emc_dbg(emc, INFO, "tRTM = %u, EMC_RP = %u\n", tRTM,
+			next->burst_regs[EMC_RP_INDEX]);
+
+		if (last->burst_regs[EMC_RP_INDEX] < tRTM) {
+			if (tRTM > (last->burst_regs[EMC_R2P_INDEX] +
+				    last->burst_regs[EMC_RP_INDEX])) {
+				R2P_war = tRTM - last->burst_regs[EMC_RP_INDEX];
+				RP_war = last->burst_regs[EMC_RP_INDEX];
+				TRPab_war = last->burst_regs[EMC_TRPAB_INDEX];
+
+				if (R2P_war > 63) {
+					RP_war = R2P_war +
+						 last->burst_regs[EMC_RP_INDEX] - 63;
+
+					if (TRPab_war < RP_war)
+						TRPab_war = RP_war;
+
+					R2P_war = 63;
+				}
+			} else {
+				R2P_war = last->burst_regs[EMC_R2P_INDEX];
+				RP_war = last->burst_regs[EMC_RP_INDEX];
+				TRPab_war = last->burst_regs[EMC_TRPAB_INDEX];
+			}
+
+			if (RP_war < deltaTWATM) {
+				W2P_war = last->burst_regs[EMC_W2P_INDEX]
+					  + deltaTWATM - RP_war;
+				if (W2P_war > 63) {
+					RP_war = RP_war + W2P_war - 63;
+					if (TRPab_war < RP_war)
+						TRPab_war = RP_war;
+					W2P_war = 63;
+				}
+			} else {
+				W2P_war = last->burst_regs[
+					  EMC_W2P_INDEX];
+			}
+
+			if ((last->burst_regs[EMC_W2P_INDEX] ^ W2P_war) ||
+			    (last->burst_regs[EMC_R2P_INDEX] ^ R2P_war) ||
+			    (last->burst_regs[EMC_RP_INDEX] ^ RP_war) ||
+			    (last->burst_regs[EMC_TRPAB_INDEX] ^ TRPab_war)) {
+				emc_writel(emc, RP_war, EMC_RP);
+				emc_writel(emc, R2P_war, EMC_R2P);
+				emc_writel(emc, W2P_war, EMC_W2P);
+				emc_writel(emc, TRPab_war, EMC_TRPAB);
+			}
+
+			tegra210_emc_timing_update(emc);
+		} else {
+			emc_dbg(emc, INFO, "Skipped WAR\n");
+		}
+	}
+
+	if (!fsp_for_next_freq) {
+		mr13_flip_fspwr = (next->emc_mrw3 & 0xffffff3f) | 0x80;
+		mr13_flip_fspop = (next->emc_mrw3 & 0xffffff3f) | 0x00;
+	} else {
+		mr13_flip_fspwr = (next->emc_mrw3 & 0xffffff3f) | 0x40;
+		mr13_flip_fspop = (next->emc_mrw3 & 0xffffff3f) | 0xc0;
+	}
+
+	if (dram_type == DRAM_TYPE_LPDDR4) {
+		emc_writel(emc, mr13_flip_fspwr, EMC_MRW3);
+		emc_writel(emc, next->emc_mrw, EMC_MRW);
+		emc_writel(emc, next->emc_mrw2, EMC_MRW2);
+	}
+
+	/*
+	 * Step 8:
+	 *   Program the shadow registers.
+	 */
+	emc_dbg(emc, STEPS, "Step 8\n");
+	emc_dbg(emc, SUB_STEPS, "Writing burst_regs\n");
+
+	for (i = 0; i < next->num_burst; i++) {
+		const u16 *offsets = emc->offsets->burst;
+		u16 offset;
+
+		if (!offsets[i])
+			continue;
+
+		value = next->burst_regs[i];
+		offset = offsets[i];
+
+		if (dram_type != DRAM_TYPE_LPDDR4 &&
+		    (offset == EMC_MRW6 || offset == EMC_MRW7 ||
+		     offset == EMC_MRW8 || offset == EMC_MRW9 ||
+		     offset == EMC_MRW10 || offset == EMC_MRW11 ||
+		     offset == EMC_MRW12 || offset == EMC_MRW13 ||
+		     offset == EMC_MRW14 || offset == EMC_MRW15 ||
+		     offset == EMC_TRAINING_CTRL))
+			continue;
+
+		/* Pain... And suffering. */
+		if (offset == EMC_CFG) {
+			value &= ~EMC_CFG_DRAM_ACPD;
+			value &= ~EMC_CFG_DYN_SELF_REF;
+
+			if (dram_type == DRAM_TYPE_LPDDR4) {
+				value &= ~EMC_CFG_DRAM_CLKSTOP_SR;
+				value &= ~EMC_CFG_DRAM_CLKSTOP_PD;
+			}
+		} else if (offset == EMC_MRS_WAIT_CNT &&
+			   dram_type == DRAM_TYPE_LPDDR2 &&
+			   opt_zcal_en_cc && !opt_cc_short_zcal &&
+			   opt_short_zcal) {
+			value = (value & ~(EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK <<
+					   EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT)) |
+				((zq_wait_long & EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK) <<
+						 EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT);
+		} else if (offset == EMC_ZCAL_WAIT_CNT &&
+			   dram_type == DRAM_TYPE_DDR3 && opt_zcal_en_cc &&
+			   !opt_cc_short_zcal && opt_short_zcal) {
+			value = (value & ~(EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_MASK <<
+					   EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_SHIFT)) |
+			        ((zq_wait_long & EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_MASK) <<
+						 EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT);
+		} else if (offset == EMC_ZCAL_INTERVAL && opt_zcal_en_cc) {
+			value = 0; /* EMC_ZCAL_INTERVAL reset value. */
+		} else if (offset == EMC_PMACRO_AUTOCAL_CFG_COMMON) {
+			value |= EMC_PMACRO_AUTOCAL_CFG_COMMON_E_CAL_BYPASS_DVFS;
+		} else if (offset == EMC_PMACRO_DATA_PAD_TX_CTRL) {
+			value &= ~(EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSP_TX_E_DCC |
+				   EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSN_TX_E_DCC |
+				   EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_TX_E_DCC |
+				   EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_CMD_TX_E_DCC);
+		} else if (offset == EMC_PMACRO_CMD_PAD_TX_CTRL) {
+			value |= EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_DRVFORCEON;
+			value &= ~(EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSP_TX_E_DCC |
+				   EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSN_TX_E_DCC |
+				   EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_E_DCC |
+				   EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_CMD_TX_E_DCC);
+		} else if (offset == EMC_PMACRO_BRICK_CTRL_RFU1) {
+			value &= 0xf800f800;
+		} else if (offset == EMC_PMACRO_COMMON_PAD_TX_CTRL) {
+			value &= 0xfffffff0;
+		}
+
+		emc_writel(emc, value, offset);
+	}
+
+	/* SW addition: do EMC refresh adjustment here. */
+	tegra210_emc_adjust_timing(emc, next);
+
+	if (dram_type == DRAM_TYPE_LPDDR4) {
+		value = (23 << EMC_MRW_MRW_MA_SHIFT) |
+			(next->run_clocks & EMC_MRW_MRW_OP_MASK);
+		emc_writel(emc, value, EMC_MRW);
+	}
+
+	/* Per channel burst registers. */
+	emc_dbg(emc, SUB_STEPS, "Writing burst_regs_per_ch\n");
+
+	for (i = 0; i < next->num_burst_per_ch; i++) {
+		const struct tegra210_emc_per_channel_regs *burst =
+				emc->offsets->burst_per_channel;
+
+		if (!burst[i].offset)
+			continue;
+
+		if (dram_type != DRAM_TYPE_LPDDR4 &&
+		    (burst[i].offset == EMC_MRW6 ||
+		     burst[i].offset == EMC_MRW7 ||
+		     burst[i].offset == EMC_MRW8 ||
+		     burst[i].offset == EMC_MRW9 ||
+		     burst[i].offset == EMC_MRW10 ||
+		     burst[i].offset == EMC_MRW11 ||
+		     burst[i].offset == EMC_MRW12 ||
+		     burst[i].offset == EMC_MRW13 ||
+		     burst[i].offset == EMC_MRW14 ||
+		     burst[i].offset == EMC_MRW15))
+			continue;
+
+		/* Filter out second channel if not in DUAL_CHANNEL mode. */
+		if (emc->num_channels < 2 && burst[i].bank >= 1)
+			continue;
+
+		emc_dbg(emc, REG_LISTS, "(%u) 0x%08x => 0x%08x\n", i,
+			next->burst_reg_per_ch[i], burst[i].offset);
+		emc_channel_writel(emc, burst[i].bank,
+				   next->burst_reg_per_ch[i],
+				   burst[i].offset);
+	}
+
+	/* Vref regs. */
+	emc_dbg(emc, SUB_STEPS, "Writing vref_regs\n");
+
+	for (i = 0; i < next->vref_num; i++) {
+		const struct tegra210_emc_per_channel_regs *vref =
+					emc->offsets->vref_per_channel;
+
+		if (!vref[i].offset)
+			continue;
+
+		if (emc->num_channels < 2 && vref[i].bank >= 1)
+			continue;
+
+		emc_dbg(emc, REG_LISTS, "(%u) 0x%08x => 0x%08x\n", i,
+			next->vref_perch_regs[i], vref[i].offset);
+		emc_channel_writel(emc, vref[i].bank, next->vref_perch_regs[i],
+				   vref[i].offset);
+	}
+
+	/* Trimmers. */
+	emc_dbg(emc, SUB_STEPS, "Writing trim_regs\n");
+
+	for (i = 0; i < next->num_trim; i++) {
+		const u16 *offsets = emc->offsets->trim;
+
+		if (!offsets[i])
+			continue;
+
+		if (compensate_trimmer_applicable &&
+		    (offsets[i] == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0 ||
+		     offsets[i] == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1 ||
+		     offsets[i] == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2 ||
+		     offsets[i] == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3 ||
+		     offsets[i] == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0 ||
+		     offsets[i] == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1 ||
+		     offsets[i] == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2 ||
+		     offsets[i] == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3 ||
+		     offsets[i] == EMC_DATA_BRLSHFT_0 ||
+		     offsets[i] == EMC_DATA_BRLSHFT_1)) {
+			value = tegra210_emc_compensate(next, offsets[i]);
+			emc_dbg(emc, REG_LISTS, "(%u) 0x%08x => 0x%08x\n", i,
+				value, offsets[i]);
+			emc_dbg(emc, EMA_WRITES, "0x%08x <= 0x%08x\n",
+				(u32)(u64)offsets[i], value);
+			emc_writel(emc, value, offsets[i]);
+		} else {
+			emc_dbg(emc, REG_LISTS, "(%u) 0x%08x => 0x%08x\n", i,
+				next->trim_regs[i], offsets[i]);
+			emc_writel(emc, next->trim_regs[i], offsets[i]);
+		}
+	}
+
+	/* Per channel trimmers. */
+	emc_dbg(emc, SUB_STEPS, "Writing trim_regs_per_ch\n");
+
+	for (i = 0; i < next->num_trim_per_ch; i++) {
+		const struct tegra210_emc_per_channel_regs *trim =
+				&emc->offsets->trim_per_channel[0];
+		unsigned int offset;
+
+		if (!trim[i].offset)
+			continue;
+
+		if (emc->num_channels < 2 && trim[i].bank >= 1)
+			continue;
+
+		offset = trim[i].offset;
+
+		if (compensate_trimmer_applicable &&
+		    (offset == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0 ||
+		     offset == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1 ||
+		     offset == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2 ||
+		     offset == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3 ||
+		     offset == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0 ||
+		     offset == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1 ||
+		     offset == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2 ||
+		     offset == EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3 ||
+		     offset == EMC_DATA_BRLSHFT_0 ||
+		     offset == EMC_DATA_BRLSHFT_1)) {
+			value = tegra210_emc_compensate(next, offset);
+			emc_dbg(emc, REG_LISTS, "(%u) 0x%08x => 0x%08x\n", i,
+				value, offset);
+			emc_dbg(emc, EMA_WRITES, "0x%08x <= 0x%08x\n", offset,
+				value);
+			emc_channel_writel(emc, trim[i].bank, value, offset);
+		} else {
+			emc_dbg(emc, REG_LISTS, "(%u) 0x%08x => 0x%08x\n", i,
+				next->trim_perch_regs[i], offset);
+			emc_channel_writel(emc, trim[i].bank,
+					   next->trim_perch_regs[i], offset);
+		}
+	}
+
+	emc_dbg(emc, SUB_STEPS, "Writing burst_mc_regs\n");
+
+	for (i = 0; i < next->num_mc_regs; i++) {
+		const u16 *offsets = emc->offsets->burst_mc;
+		u32 *values = next->burst_mc_regs;
+
+		emc_dbg(emc, REG_LISTS, "(%u) 0x%08x => 0x%08x\n", i,
+			values[i], offsets[i]);
+		mc_writel(emc->mc, values[i], offsets[i]);
+	}
+
+	/* Registers to be programmed on the faster clock. */
+	if (next->rate < last->rate) {
+		const u16 *la = emc->offsets->la_scale;
+
+		emc_dbg(emc, SUB_STEPS, "Writing la_scale_regs\n");
+
+		for (i = 0; i < next->num_up_down; i++) {
+			emc_dbg(emc, REG_LISTS, "(%u) 0x%08x => 0x%08x\n", i,
+				next->la_scale_regs[i], la[i]);
+			mc_writel(emc->mc, next->la_scale_regs[i], la[i]);
+		}
+	}
+
+	/* Flush all the burst register writes. */
+	mc_readl(emc->mc, MC_EMEM_ADR_CFG);
+
+	/*
+	 * Step 9:
+	 *   LPDDR4 section A.
+	 */
+	emc_dbg(emc, STEPS, "Step 9\n");
+
+	value = next->burst_regs[EMC_ZCAL_WAIT_CNT_INDEX];
+	value &= ~EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_MASK;
+
+	if (dram_type == DRAM_TYPE_LPDDR4) {
+		emc_writel(emc, 0, EMC_ZCAL_INTERVAL);
+		emc_writel(emc, value, EMC_ZCAL_WAIT_CNT);
+
+		value = emc_dbg | (EMC_DBG_WRITE_MUX_ACTIVE |
+				   EMC_DBG_WRITE_ACTIVE_ONLY);
+
+		emc_writel(emc, value, EMC_DBG);
+		emc_writel(emc, 0, EMC_ZCAL_INTERVAL);
+		emc_writel(emc, emc_dbg, EMC_DBG);
+	}
+
+	/*
+	 * Step 10:
+	 *   LPDDR4 and DDR3 common section.
+	 */
+	emc_dbg(emc, STEPS, "Step 10\n");
+
+	if (opt_dvfs_mode == MAN_SR || dram_type == DRAM_TYPE_LPDDR4) {
+		if (dram_type == DRAM_TYPE_LPDDR4)
+			ccfifo_writel(emc, 0x101, EMC_SELF_REF, 0);
+		else
+			ccfifo_writel(emc, 0x1, EMC_SELF_REF, 0);
+
+		if (dram_type == DRAM_TYPE_LPDDR4 &&
+		    dst_clk_period <= zqcal_before_cc_cutoff) {
+			ccfifo_writel(emc, mr13_flip_fspwr ^ 0x40, EMC_MRW3, 0);
+			ccfifo_writel(emc, (next->burst_regs[EMC_MRW6_INDEX] &
+						0xFFFF3F3F) |
+					   (last->burst_regs[EMC_MRW6_INDEX] &
+						0x0000C0C0), EMC_MRW6, 0);
+			ccfifo_writel(emc, (next->burst_regs[EMC_MRW14_INDEX] &
+						0xFFFF0707) |
+					   (last->burst_regs[EMC_MRW14_INDEX] &
+						0x00003838), EMC_MRW14, 0);
+
+			if (emc->num_devices > 1) {
+				ccfifo_writel(emc,
+				      (next->burst_regs[EMC_MRW7_INDEX] &
+				       0xFFFF3F3F) |
+				      (last->burst_regs[EMC_MRW7_INDEX] &
+				       0x0000C0C0), EMC_MRW7, 0);
+				ccfifo_writel(emc,
+				     (next->burst_regs[EMC_MRW15_INDEX] &
+				      0xFFFF0707) |
+				     (last->burst_regs[EMC_MRW15_INDEX] &
+				      0x00003838), EMC_MRW15, 0);
+			}
+
+			if (opt_zcal_en_cc) {
+				if (emc->num_devices < 2)
+					ccfifo_writel(emc,
+						2UL << EMC_ZQ_CAL_DEV_SEL_SHIFT
+						| EMC_ZQ_CAL_ZQ_CAL_CMD,
+						EMC_ZQ_CAL, 0);
+				else if (shared_zq_resistor)
+					ccfifo_writel(emc,
+						2UL << EMC_ZQ_CAL_DEV_SEL_SHIFT
+						| EMC_ZQ_CAL_ZQ_CAL_CMD,
+						EMC_ZQ_CAL, 0);
+				else
+					ccfifo_writel(emc,
+						      EMC_ZQ_CAL_ZQ_CAL_CMD,
+						      EMC_ZQ_CAL, 0);
+			}
+		}
+	}
+
+	if (dram_type == DRAM_TYPE_LPDDR4) {
+		value = (1000 * fake->dram_timings[T_RP]) / src_clk_period;
+		ccfifo_writel(emc, mr13_flip_fspop | 0x8, EMC_MRW3, value);
+		ccfifo_writel(emc, 0, 0, tFC_lpddr4 / src_clk_period);
+	}
+
+	if (dram_type == DRAM_TYPE_LPDDR4 || opt_dvfs_mode != MAN_SR) {
+		delay = 30;
+
+		if (cya_allow_ref_cc) {
+			delay += (1000 * fake->dram_timings[T_RP]) /
+					src_clk_period;
+			delay += 4000 * fake->dram_timings[T_RFC];
+		}
+
+		ccfifo_writel(emc, emc_pin & ~(EMC_PIN_PIN_CKE_PER_DEV |
+					       EMC_PIN_PIN_CKEB |
+					       EMC_PIN_PIN_CKE),
+			      EMC_PIN, delay);
+	}
+
+	/* calculate reference delay multiplier */
+	value = 1;
+
+	if (ref_b4_sref_en)
+		value++;
+
+	if (cya_allow_ref_cc)
+		value++;
+
+	if (cya_issue_pc_ref)
+		value++;
+
+	if (dram_type != DRAM_TYPE_LPDDR4) {
+		delay = ((1000 * fake->dram_timings[T_RP] / src_clk_period) +
+			 (1000 * fake->dram_timings[T_RFC] / src_clk_period));
+		delay = value * delay + 20;
+	} else {
+		delay = 0;
+	}
+
+	/*
+	 * Step 11:
+	 *   Ramp down.
+	 */
+	emc_dbg(emc, STEPS, "Step 11\n");
+
+	ccfifo_writel(emc, 0x0, EMC_CFG_SYNC, delay);
+
+	value = emc_dbg | EMC_DBG_WRITE_MUX_ACTIVE | EMC_DBG_WRITE_ACTIVE_ONLY;
+	ccfifo_writel(emc, value, EMC_DBG, 0);
+
+	ramp_down_wait = tegra210_emc_dvfs_power_ramp_down(emc, src_clk_period,
+							   0);
+
+	/*
+	 * Step 12:
+	 *   And finally - trigger the clock change.
+	 */
+	emc_dbg(emc, STEPS, "Step 12\n");
+
+	ccfifo_writel(emc, 1, EMC_STALL_THEN_EXE_AFTER_CLKCHANGE, 0);
+	value &= ~EMC_DBG_WRITE_ACTIVE_ONLY;
+	ccfifo_writel(emc, value, EMC_DBG, 0);
+
+	/*
+	 * Step 13:
+	 *   Ramp up.
+	 */
+	emc_dbg(emc, STEPS, "Step 13\n");
+
+	ramp_up_wait = tegra210_emc_dvfs_power_ramp_up(emc, dst_clk_period, 0);
+	ccfifo_writel(emc, emc_dbg, EMC_DBG, 0);
+
+	/*
+	 * Step 14:
+	 *   Bringup CKE pins.
+	 */
+	emc_dbg(emc, STEPS, "Step 14\n");
+
+	if (dram_type == DRAM_TYPE_LPDDR4) {
+		value = emc_pin | EMC_PIN_PIN_CKE;
+
+		if (emc->num_devices <= 1)
+			value &= ~(EMC_PIN_PIN_CKEB | EMC_PIN_PIN_CKE_PER_DEV);
+		else
+			value |= EMC_PIN_PIN_CKEB | EMC_PIN_PIN_CKE_PER_DEV;
+
+		ccfifo_writel(emc, value, EMC_PIN, 0);
+	}
+
+	/*
+	 * Step 15: (two step 15s ??)
+	 *   Calculate zqlatch wait time; has dependency on ramping times.
+	 */
+	emc_dbg(emc, STEPS, "Step 15\n");
+
+	if (dst_clk_period <= zqcal_before_cc_cutoff) {
+		s32 t = (s32)(ramp_up_wait + ramp_down_wait) /
+			(s32)dst_clk_period;
+		zq_latch_dvfs_wait_time = (s32)tZQCAL_lpddr4_fc_adj - t;
+	} else {
+		zq_latch_dvfs_wait_time = tZQCAL_lpddr4_fc_adj -
+			div_o3(1000 * next->dram_timings[T_PDEX],
+			       dst_clk_period);
+	}
+
+	emc_dbg(emc, INFO, "tZQCAL_lpddr4_fc_adj = %u\n", tZQCAL_lpddr4_fc_adj);
+	emc_dbg(emc, INFO, "dst_clk_period = %u\n",
+		dst_clk_period);
+	emc_dbg(emc, INFO, "next->dram_timings[T_PDEX] = %u\n",
+		next->dram_timings[T_PDEX]);
+	emc_dbg(emc, INFO, "zq_latch_dvfs_wait_time = %d\n",
+		max_t(s32, 0, zq_latch_dvfs_wait_time));
+
+	if (dram_type == DRAM_TYPE_LPDDR4 && opt_zcal_en_cc) {
+		delay = div_o3(1000 * next->dram_timings[T_PDEX],
+			       dst_clk_period);
+
+		if (emc->num_devices < 2) {
+			if (dst_clk_period > zqcal_before_cc_cutoff)
+				ccfifo_writel(emc,
+					      2UL << EMC_ZQ_CAL_DEV_SEL_SHIFT |
+					      EMC_ZQ_CAL_ZQ_CAL_CMD, EMC_ZQ_CAL,
+					      delay);
+
+			value = (mr13_flip_fspop & 0xfffffff7) | 0x0c000000;
+			ccfifo_writel(emc, value, EMC_MRW3, delay);
+			ccfifo_writel(emc, 0, EMC_SELF_REF, 0);
+			ccfifo_writel(emc, 0, EMC_REF, 0);
+			ccfifo_writel(emc, 2UL << EMC_ZQ_CAL_DEV_SEL_SHIFT |
+				      EMC_ZQ_CAL_ZQ_LATCH_CMD,
+				      EMC_ZQ_CAL,
+				      max_t(s32, 0, zq_latch_dvfs_wait_time));
+		} else if (shared_zq_resistor) {
+			if (dst_clk_period > zqcal_before_cc_cutoff)
+				ccfifo_writel(emc,
+					      2UL << EMC_ZQ_CAL_DEV_SEL_SHIFT |
+					      EMC_ZQ_CAL_ZQ_CAL_CMD, EMC_ZQ_CAL,
+					      delay);
+
+			ccfifo_writel(emc, 2UL << EMC_ZQ_CAL_DEV_SEL_SHIFT |
+				      EMC_ZQ_CAL_ZQ_LATCH_CMD, EMC_ZQ_CAL,
+				      max_t(s32, 0, zq_latch_dvfs_wait_time) +
+					delay);
+			ccfifo_writel(emc, 1UL << EMC_ZQ_CAL_DEV_SEL_SHIFT |
+				      EMC_ZQ_CAL_ZQ_LATCH_CMD,
+				      EMC_ZQ_CAL, 0);
+
+			value = (mr13_flip_fspop & 0xfffffff7) | 0x0c000000;
+			ccfifo_writel(emc, value, EMC_MRW3, 0);
+			ccfifo_writel(emc, 0, EMC_SELF_REF, 0);
+			ccfifo_writel(emc, 0, EMC_REF, 0);
+
+			ccfifo_writel(emc, 1UL << EMC_ZQ_CAL_DEV_SEL_SHIFT |
+				      EMC_ZQ_CAL_ZQ_LATCH_CMD, EMC_ZQ_CAL,
+				      tZQCAL_lpddr4 / dst_clk_period);
+		} else {
+			if (dst_clk_period > zqcal_before_cc_cutoff)
+				ccfifo_writel(emc, EMC_ZQ_CAL_ZQ_CAL_CMD,
+					      EMC_ZQ_CAL, delay);
+
+			value = (mr13_flip_fspop & 0xfffffff7) | 0x0c000000;
+			ccfifo_writel(emc, value, EMC_MRW3, delay);
+			ccfifo_writel(emc, 0, EMC_SELF_REF, 0);
+			ccfifo_writel(emc, 0, EMC_REF, 0);
+
+			ccfifo_writel(emc, EMC_ZQ_CAL_ZQ_LATCH_CMD, EMC_ZQ_CAL,
+				      max_t(s32, 0, zq_latch_dvfs_wait_time));
+		}
+	}
+
+	/* WAR: delay for zqlatch */
+	ccfifo_writel(emc, 0, 0, 10);
+
+	/*
+	 * Step 16:
+	 *   LPDDR4 Conditional Training Kickoff. Removed.
+	 */
+
+	/*
+	 * Step 17:
+	 *   MANSR exit self refresh.
+	 */
+	emc_dbg(emc, STEPS, "Step 17\n");
+
+	if (opt_dvfs_mode == MAN_SR && dram_type != DRAM_TYPE_LPDDR4)
+		ccfifo_writel(emc, 0, EMC_SELF_REF, 0);
+
+	/*
+	 * Step 18:
+	 *   Send MRWs to LPDDR3/DDR3.
+	 */
+	emc_dbg(emc, STEPS, "Step 18\n");
+
+	if (dram_type == DRAM_TYPE_LPDDR2) {
+		ccfifo_writel(emc, next->emc_mrw2, EMC_MRW2, 0);
+		ccfifo_writel(emc, next->emc_mrw,  EMC_MRW,  0);
+		if (is_lpddr3)
+			ccfifo_writel(emc, next->emc_mrw4, EMC_MRW4, 0);
+	} else if (dram_type == DRAM_TYPE_DDR3) {
+		if (opt_dll_mode)
+			ccfifo_writel(emc, next->emc_emrs &
+				      ~EMC_EMRS_USE_EMRS_LONG_CNT, EMC_EMRS, 0);
+		ccfifo_writel(emc, next->emc_emrs2 &
+			      ~EMC_EMRS2_USE_EMRS2_LONG_CNT, EMC_EMRS2, 0);
+		ccfifo_writel(emc, next->emc_mrs |
+			      EMC_EMRS_USE_EMRS_LONG_CNT, EMC_MRS, 0);
+	}
+
+	/*
+	 * Step 19:
+	 *   ZQCAL for LPDDR3/DDR3
+	 */
+	emc_dbg(emc, STEPS, "Step 19\n");
+
+	if (opt_zcal_en_cc) {
+		if (dram_type == DRAM_TYPE_LPDDR2) {
+			value = opt_cc_short_zcal ? 90000 : 360000;
+			value = div_o3(value, dst_clk_period);
+			value = value <<
+				EMC_MRS_WAIT_CNT2_MRS_EXT2_WAIT_CNT_SHIFT |
+				value <<
+				EMC_MRS_WAIT_CNT2_MRS_EXT1_WAIT_CNT_SHIFT;
+			ccfifo_writel(emc, value, EMC_MRS_WAIT_CNT2, 0);
+
+			value = opt_cc_short_zcal ? 0x56 : 0xab;
+			ccfifo_writel(emc, 2 << EMC_MRW_MRW_DEV_SELECTN_SHIFT |
+					   EMC_MRW_USE_MRW_EXT_CNT |
+					   10 << EMC_MRW_MRW_MA_SHIFT |
+					   value << EMC_MRW_MRW_OP_SHIFT,
+				      EMC_MRW, 0);
+
+			if (emc->num_devices > 1) {
+				value = 1 << EMC_MRW_MRW_DEV_SELECTN_SHIFT |
+					EMC_MRW_USE_MRW_EXT_CNT |
+					10 << EMC_MRW_MRW_MA_SHIFT |
+					value << EMC_MRW_MRW_OP_SHIFT;
+				ccfifo_writel(emc, value, EMC_MRW, 0);
+			}
+		} else if (dram_type == DRAM_TYPE_DDR3) {
+			value = opt_cc_short_zcal ? 0 : EMC_ZQ_CAL_LONG;
+
+			ccfifo_writel(emc, value |
+					   2 << EMC_ZQ_CAL_DEV_SEL_SHIFT |
+					   EMC_ZQ_CAL_ZQ_CAL_CMD, EMC_ZQ_CAL,
+					   0);
+
+			if (emc->num_devices > 1) {
+				value = value | 1 << EMC_ZQ_CAL_DEV_SEL_SHIFT |
+						EMC_ZQ_CAL_ZQ_CAL_CMD;
+				ccfifo_writel(emc, value, EMC_ZQ_CAL, 0);
+			}
+		}
+	}
+
+	if (bg_reg_mode_change) {
+		tegra210_emc_set_shadow_bypass(emc, ACTIVE);
+
+		if (ramp_up_wait <= 1250000)
+			delay = (1250000 - ramp_up_wait) / dst_clk_period;
+		else
+			delay = 0;
+
+		ccfifo_writel(emc,
+			      next->burst_regs[EMC_PMACRO_BG_BIAS_CTRL_0_INDEX],
+			      EMC_PMACRO_BG_BIAS_CTRL_0, delay);
+		tegra210_emc_set_shadow_bypass(emc, ASSEMBLY);
+	}
+
+	/*
+	 * Step 20:
+	 *   Issue ref and optional QRST.
+	 */
+	emc_dbg(emc, STEPS, "Step 20\n");
+
+	if (dram_type != DRAM_TYPE_LPDDR4)
+		ccfifo_writel(emc, 0, EMC_REF, 0);
+
+	if (opt_do_sw_qrst) {
+		ccfifo_writel(emc, 1, EMC_ISSUE_QRST, 0);
+		ccfifo_writel(emc, 0, EMC_ISSUE_QRST, 2);
+	}
+
+	/*
+	 * Step 21:
+	 *   Restore ZCAL and ZCAL interval.
+	 */
+	emc_dbg(emc, STEPS, "Step 21\n");
+
+	if (save_restore_clkstop_pd || opt_zcal_en_cc) {
+		ccfifo_writel(emc, emc_dbg | EMC_DBG_WRITE_MUX_ACTIVE,
+			      EMC_DBG, 0);
+		if (opt_zcal_en_cc && dram_type != DRAM_TYPE_LPDDR4)
+			ccfifo_writel(emc, next->burst_regs[EMC_ZCAL_INTERVAL_INDEX],
+				      EMC_ZCAL_INTERVAL, 0);
+
+		if (save_restore_clkstop_pd)
+			ccfifo_writel(emc, next->burst_regs[EMC_CFG_INDEX] &
+						~EMC_CFG_DYN_SELF_REF,
+				      EMC_CFG, 0);
+		ccfifo_writel(emc, emc_dbg, EMC_DBG, 0);
+	}
+
+	/*
+	 * Step 22:
+	 *   Restore EMC_CFG_PIPE_CLK.
+	 */
+	emc_dbg(emc, STEPS, "Step 22\n");
+
+	ccfifo_writel(emc, emc_cfg_pipe_clk, EMC_CFG_PIPE_CLK, 0);
+
+	if (bg_reg_mode_change) {
+		if (enable_bg_reg)
+			emc_writel(emc,
+				   next->burst_regs[EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+					~EMC_PMACRO_BG_BIAS_CTRL_0_BGLP_E_PWRD,
+				   EMC_PMACRO_BG_BIAS_CTRL_0);
+		else
+			emc_writel(emc,
+				   next->burst_regs[EMC_PMACRO_BG_BIAS_CTRL_0_INDEX] &
+					~EMC_PMACRO_BG_BIAS_CTRL_0_BG_E_PWRD,
+				   EMC_PMACRO_BG_BIAS_CTRL_0);
+	}
+
+	/*
+	 * Step 23:
+	 */
+	emc_dbg(emc, STEPS, "Step 23\n");
+
+	value = emc_readl(emc, EMC_CFG_DIG_DLL);
+	value |= EMC_CFG_DIG_DLL_CFG_DLL_STALL_ALL_TRAFFIC;
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_STALL_RW_UNTIL_LOCK;
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_STALL_ALL_UNTIL_LOCK;
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_EN;
+	value = (value & ~EMC_CFG_DIG_DLL_CFG_DLL_MODE_MASK) |
+		(2 << EMC_CFG_DIG_DLL_CFG_DLL_MODE_SHIFT);
+	emc_writel(emc, value, EMC_CFG_DIG_DLL);
+
+	tegra210_emc_do_clock_change(emc, clksrc);
+
+	/*
+	 * Step 24:
+	 *   Save training results. Removed.
+	 */
+
+	/*
+	 * Step 25:
+	 *   Program MC updown registers.
+	 */
+	emc_dbg(emc, STEPS, "Step 25\n");
+
+	if (next->rate > last->rate) {
+		for (i = 0; i < next->num_up_down; i++)
+			mc_writel(emc->mc, next->la_scale_regs[i],
+				  emc->offsets->la_scale[i]);
+
+		tegra210_emc_timing_update(emc);
+	}
+
+	/*
+	 * Step 26:
+	 *   Restore ZCAL registers.
+	 */
+	emc_dbg(emc, STEPS, "Step 26\n");
+
+	if (dram_type == DRAM_TYPE_LPDDR4) {
+		tegra210_emc_set_shadow_bypass(emc, ACTIVE);
+		emc_writel(emc, next->burst_regs[EMC_ZCAL_WAIT_CNT_INDEX],
+			   EMC_ZCAL_WAIT_CNT);
+		emc_writel(emc, next->burst_regs[EMC_ZCAL_INTERVAL_INDEX],
+			   EMC_ZCAL_INTERVAL);
+		tegra210_emc_set_shadow_bypass(emc, ASSEMBLY);
+	}
+
+	if (dram_type != DRAM_TYPE_LPDDR4 && opt_zcal_en_cc &&
+	    !opt_short_zcal && opt_cc_short_zcal) {
+		udelay(2);
+
+		tegra210_emc_set_shadow_bypass(emc, ACTIVE);
+		if (dram_type == DRAM_TYPE_LPDDR2)
+			emc_writel(emc, next->burst_regs[EMC_MRS_WAIT_CNT_INDEX],
+				   EMC_MRS_WAIT_CNT);
+		else if (dram_type == DRAM_TYPE_DDR3)
+			emc_writel(emc, next->burst_regs[EMC_ZCAL_WAIT_CNT_INDEX],
+				   EMC_ZCAL_WAIT_CNT);
+		tegra210_emc_set_shadow_bypass(emc, ASSEMBLY);
+	}
+
+	/*
+	 * Step 27:
+	 *   Restore EMC_CFG, FDPD registers.
+	 */
+	emc_dbg(emc, STEPS, "Step 27\n");
+
+	tegra210_emc_set_shadow_bypass(emc, ACTIVE);
+	emc_writel(emc, next->burst_regs[EMC_CFG_INDEX], EMC_CFG);
+	tegra210_emc_set_shadow_bypass(emc, ASSEMBLY);
+	emc_writel(emc, next->emc_fdpd_ctrl_cmd_no_ramp,
+		   EMC_FDPD_CTRL_CMD_NO_RAMP);
+	emc_writel(emc, next->emc_sel_dpd_ctrl, EMC_SEL_DPD_CTRL);
+
+	/*
+	 * Step 28:
+	 *   Training recover. Removed.
+	 */
+	emc_dbg(emc, STEPS, "Step 28\n");
+
+	tegra210_emc_set_shadow_bypass(emc, ACTIVE);
+	emc_writel(emc,
+		   next->burst_regs[EMC_PMACRO_AUTOCAL_CFG_COMMON_INDEX],
+		   EMC_PMACRO_AUTOCAL_CFG_COMMON);
+	tegra210_emc_set_shadow_bypass(emc, ASSEMBLY);
+
+	/*
+	 * Step 29:
+	 *   Power fix WAR.
+	 */
+	emc_dbg(emc, STEPS, "Step 29\n");
+
+	emc_writel(emc, EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE0 |
+		   EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE1 |
+		   EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE2 |
+		   EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE3 |
+		   EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE4 |
+		   EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE5 |
+		   EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE6 |
+		   EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE7,
+		   EMC_PMACRO_CFG_PM_GLOBAL_0);
+	emc_writel(emc, EMC_PMACRO_TRAINING_CTRL_0_CH0_TRAINING_E_WRPTR,
+		   EMC_PMACRO_TRAINING_CTRL_0);
+	emc_writel(emc, EMC_PMACRO_TRAINING_CTRL_1_CH1_TRAINING_E_WRPTR,
+		   EMC_PMACRO_TRAINING_CTRL_1);
+	emc_writel(emc, 0, EMC_PMACRO_CFG_PM_GLOBAL_0);
+
+	/*
+	 * Step 30:
+	 *   Re-enable autocal.
+	 */
+	emc_dbg(emc, STEPS, "Step 30: Re-enable DLL and AUTOCAL\n");
+
+	if (next->burst_regs[EMC_CFG_DIG_DLL_INDEX] & EMC_CFG_DIG_DLL_CFG_DLL_EN) {
+		value = emc_readl(emc, EMC_CFG_DIG_DLL);
+		value |=  EMC_CFG_DIG_DLL_CFG_DLL_STALL_ALL_TRAFFIC;
+		value |=  EMC_CFG_DIG_DLL_CFG_DLL_EN;
+		value &= ~EMC_CFG_DIG_DLL_CFG_DLL_STALL_RW_UNTIL_LOCK;
+		value &= ~EMC_CFG_DIG_DLL_CFG_DLL_STALL_ALL_UNTIL_LOCK;
+		value = (value & ~EMC_CFG_DIG_DLL_CFG_DLL_MODE_MASK) |
+			(2 << EMC_CFG_DIG_DLL_CFG_DLL_MODE_SHIFT);
+		emc_writel(emc, value, EMC_CFG_DIG_DLL);
+		tegra210_emc_timing_update(emc);
+	}
+
+	emc_writel(emc, next->emc_auto_cal_config, EMC_AUTO_CAL_CONFIG);
+
+	/* Done! Yay. */
+}
+
+const struct tegra210_emc_sequence tegra210_emc_r21021 = {
+	.revision = 0x7,
+	.set_clock = tegra210_emc_r21021_set_clock,
+	.periodic_compensation = tegra210_emc_r21021_periodic_compensation,
+};
diff --git a/drivers/memory/tegra/tegra210-emc-core.c b/drivers/memory/tegra/tegra210-emc-core.c
new file mode 100644
index 000000000000..d64ffe27c245
--- /dev/null
+++ b/drivers/memory/tegra/tegra210-emc-core.c
@@ -0,0 +1,2101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk/tegra.h>
+#include <linux/clk-provider.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/mc.h>
+
+#include "tegra210-emc.h"
+#include "tegra210-mc.h"
+
+/* CLK_RST_CONTROLLER_CLK_SOURCE_EMC */
+#define EMC_CLK_EMC_2X_CLK_SRC_SHIFT			29
+#define EMC_CLK_EMC_2X_CLK_SRC_MASK			\
+	(0x7 << EMC_CLK_EMC_2X_CLK_SRC_SHIFT)
+#define EMC_CLK_SOURCE_PLLM_LJ				0x4
+#define EMC_CLK_SOURCE_PLLMB_LJ				0x5
+#define EMC_CLK_FORCE_CC_TRIGGER			BIT(27)
+#define EMC_CLK_MC_EMC_SAME_FREQ			BIT(16)
+#define EMC_CLK_EMC_2X_CLK_DIVISOR_SHIFT		0
+#define EMC_CLK_EMC_2X_CLK_DIVISOR_MASK			\
+	(0xff << EMC_CLK_EMC_2X_CLK_DIVISOR_SHIFT)
+
+/* CLK_RST_CONTROLLER_CLK_SOURCE_EMC_DLL */
+#define DLL_CLK_EMC_DLL_CLK_SRC_SHIFT			29
+#define DLL_CLK_EMC_DLL_CLK_SRC_MASK			\
+	(0x7 << DLL_CLK_EMC_DLL_CLK_SRC_SHIFT)
+#define DLL_CLK_EMC_DLL_DDLL_CLK_SEL_SHIFT		10
+#define DLL_CLK_EMC_DLL_DDLL_CLK_SEL_MASK		\
+	(0x3 << DLL_CLK_EMC_DLL_DDLL_CLK_SEL_SHIFT)
+#define PLLM_VCOA					0
+#define PLLM_VCOB					1
+#define EMC_DLL_SWITCH_OUT				2
+#define DLL_CLK_EMC_DLL_CLK_DIVISOR_SHIFT		0
+#define DLL_CLK_EMC_DLL_CLK_DIVISOR_MASK		\
+	(0xff << DLL_CLK_EMC_DLL_CLK_DIVISOR_SHIFT)
+
+/* MC_EMEM_ARB_MISC0 */
+#define MC_EMEM_ARB_MISC0_EMC_SAME_FREQ			BIT(27)
+
+/* EMC_DATA_BRLSHFT_X */
+#define EMC0_EMC_DATA_BRLSHFT_0_INDEX	2
+#define EMC1_EMC_DATA_BRLSHFT_0_INDEX	3
+#define EMC0_EMC_DATA_BRLSHFT_1_INDEX	4
+#define EMC1_EMC_DATA_BRLSHFT_1_INDEX	5
+
+#define TRIM_REG(chan, rank, reg, byte)					\
+	(((EMC_PMACRO_OB_DDLL_LONG_DQ_RANK ## rank ## _ ## reg ##	\
+	   _OB_DDLL_LONG_DQ_RANK ## rank ## _BYTE ## byte ## _MASK &	\
+	   next->trim_regs[EMC_PMACRO_OB_DDLL_LONG_DQ_RANK ##		\
+				 rank ## _ ## reg ## _INDEX]) >>	\
+	  EMC_PMACRO_OB_DDLL_LONG_DQ_RANK ## rank ## _ ## reg ##	\
+	  _OB_DDLL_LONG_DQ_RANK ## rank ## _BYTE ## byte ## _SHIFT)	\
+	 +								\
+	 (((EMC_DATA_BRLSHFT_ ## rank ## _RANK ## rank ## _BYTE ##	\
+	    byte ## _DATA_BRLSHFT_MASK &				\
+	    next->trim_perch_regs[EMC ## chan ##			\
+			      _EMC_DATA_BRLSHFT_ ## rank ## _INDEX]) >>	\
+	   EMC_DATA_BRLSHFT_ ## rank ## _RANK ## rank ## _BYTE ##	\
+	   byte ## _DATA_BRLSHFT_SHIFT) * 64))
+
+#define CALC_TEMP(rank, reg, byte1, byte2, n)				\
+	(((new[n] << EMC_PMACRO_OB_DDLL_LONG_DQ_RANK ## rank ## _ ##	\
+	   reg ## _OB_DDLL_LONG_DQ_RANK ## rank ## _BYTE ## byte1 ## _SHIFT) & \
+	  EMC_PMACRO_OB_DDLL_LONG_DQ_RANK ## rank ## _ ## reg ##	\
+	  _OB_DDLL_LONG_DQ_RANK ## rank ## _BYTE ## byte1 ## _MASK)	\
+	 |								\
+	 ((new[n + 1] << EMC_PMACRO_OB_DDLL_LONG_DQ_RANK ## rank ## _ ##\
+	   reg ## _OB_DDLL_LONG_DQ_RANK ## rank ## _BYTE ## byte2 ## _SHIFT) & \
+	  EMC_PMACRO_OB_DDLL_LONG_DQ_RANK ## rank ## _ ## reg ##	\
+	  _OB_DDLL_LONG_DQ_RANK ## rank ## _BYTE ## byte2 ## _MASK))
+
+#define REFRESH_SPEEDUP(value, speedup) \
+		(((value) & 0xffff0000) | ((value) & 0xffff) * (speedup))
+
+#define LPDDR2_MR4_SRR GENMASK(2, 0)
+
+static const struct tegra210_emc_sequence *tegra210_emc_sequences[] = {
+	&tegra210_emc_r21021,
+};
+
+static const struct tegra210_emc_table_register_offsets
+tegra210_emc_table_register_offsets = {
+	.burst = {
+		EMC_RC,
+		EMC_RFC,
+		EMC_RFCPB,
+		EMC_REFCTRL2,
+		EMC_RFC_SLR,
+		EMC_RAS,
+		EMC_RP,
+		EMC_R2W,
+		EMC_W2R,
+		EMC_R2P,
+		EMC_W2P,
+		EMC_R2R,
+		EMC_TPPD,
+		EMC_CCDMW,
+		EMC_RD_RCD,
+		EMC_WR_RCD,
+		EMC_RRD,
+		EMC_REXT,
+		EMC_WEXT,
+		EMC_WDV_CHK,
+		EMC_WDV,
+		EMC_WSV,
+		EMC_WEV,
+		EMC_WDV_MASK,
+		EMC_WS_DURATION,
+		EMC_WE_DURATION,
+		EMC_QUSE,
+		EMC_QUSE_WIDTH,
+		EMC_IBDLY,
+		EMC_OBDLY,
+		EMC_EINPUT,
+		EMC_MRW6,
+		EMC_EINPUT_DURATION,
+		EMC_PUTERM_EXTRA,
+		EMC_PUTERM_WIDTH,
+		EMC_QRST,
+		EMC_QSAFE,
+		EMC_RDV,
+		EMC_RDV_MASK,
+		EMC_RDV_EARLY,
+		EMC_RDV_EARLY_MASK,
+		EMC_REFRESH,
+		EMC_BURST_REFRESH_NUM,
+		EMC_PRE_REFRESH_REQ_CNT,
+		EMC_PDEX2WR,
+		EMC_PDEX2RD,
+		EMC_PCHG2PDEN,
+		EMC_ACT2PDEN,
+		EMC_AR2PDEN,
+		EMC_RW2PDEN,
+		EMC_CKE2PDEN,
+		EMC_PDEX2CKE,
+		EMC_PDEX2MRR,
+		EMC_TXSR,
+		EMC_TXSRDLL,
+		EMC_TCKE,
+		EMC_TCKESR,
+		EMC_TPD,
+		EMC_TFAW,
+		EMC_TRPAB,
+		EMC_TCLKSTABLE,
+		EMC_TCLKSTOP,
+		EMC_MRW7,
+		EMC_TREFBW,
+		EMC_ODT_WRITE,
+		EMC_FBIO_CFG5,
+		EMC_FBIO_CFG7,
+		EMC_CFG_DIG_DLL,
+		EMC_CFG_DIG_DLL_PERIOD,
+		EMC_PMACRO_IB_RXRT,
+		EMC_CFG_PIPE_1,
+		EMC_CFG_PIPE_2,
+		EMC_PMACRO_QUSE_DDLL_RANK0_4,
+		EMC_PMACRO_QUSE_DDLL_RANK0_5,
+		EMC_PMACRO_QUSE_DDLL_RANK1_4,
+		EMC_PMACRO_QUSE_DDLL_RANK1_5,
+		EMC_MRW8,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_4,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_5,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_0,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_1,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_2,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_3,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_4,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_5,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_0,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_1,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_2,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_3,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_4,
+		EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_5,
+		EMC_PMACRO_DDLL_LONG_CMD_0,
+		EMC_PMACRO_DDLL_LONG_CMD_1,
+		EMC_PMACRO_DDLL_LONG_CMD_2,
+		EMC_PMACRO_DDLL_LONG_CMD_3,
+		EMC_PMACRO_DDLL_LONG_CMD_4,
+		EMC_PMACRO_DDLL_SHORT_CMD_0,
+		EMC_PMACRO_DDLL_SHORT_CMD_1,
+		EMC_PMACRO_DDLL_SHORT_CMD_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE0_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE1_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE2_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE3_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE4_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE5_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE6_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE7_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD0_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD1_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD2_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD3_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE0_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE1_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE2_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE3_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE4_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE5_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE6_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE7_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD0_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD0_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD0_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD0_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD1_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD1_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD1_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD1_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD2_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD2_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD2_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD2_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD3_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD3_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD3_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD3_3,
+		EMC_TXDSRVTTGEN,
+		EMC_FDPD_CTRL_DQ,
+		EMC_FDPD_CTRL_CMD,
+		EMC_FBIO_SPARE,
+		EMC_ZCAL_INTERVAL,
+		EMC_ZCAL_WAIT_CNT,
+		EMC_MRS_WAIT_CNT,
+		EMC_MRS_WAIT_CNT2,
+		EMC_AUTO_CAL_CHANNEL,
+		EMC_DLL_CFG_0,
+		EMC_DLL_CFG_1,
+		EMC_PMACRO_AUTOCAL_CFG_COMMON,
+		EMC_PMACRO_ZCTRL,
+		EMC_CFG,
+		EMC_CFG_PIPE,
+		EMC_DYN_SELF_REF_CONTROL,
+		EMC_QPOP,
+		EMC_DQS_BRLSHFT_0,
+		EMC_DQS_BRLSHFT_1,
+		EMC_CMD_BRLSHFT_2,
+		EMC_CMD_BRLSHFT_3,
+		EMC_PMACRO_PAD_CFG_CTRL,
+		EMC_PMACRO_DATA_PAD_RX_CTRL,
+		EMC_PMACRO_CMD_PAD_RX_CTRL,
+		EMC_PMACRO_DATA_RX_TERM_MODE,
+		EMC_PMACRO_CMD_RX_TERM_MODE,
+		EMC_PMACRO_CMD_PAD_TX_CTRL,
+		EMC_PMACRO_DATA_PAD_TX_CTRL,
+		EMC_PMACRO_COMMON_PAD_TX_CTRL,
+		EMC_PMACRO_VTTGEN_CTRL_0,
+		EMC_PMACRO_VTTGEN_CTRL_1,
+		EMC_PMACRO_VTTGEN_CTRL_2,
+		EMC_PMACRO_BRICK_CTRL_RFU1,
+		EMC_PMACRO_CMD_BRICK_CTRL_FDPD,
+		EMC_PMACRO_BRICK_CTRL_RFU2,
+		EMC_PMACRO_DATA_BRICK_CTRL_FDPD,
+		EMC_PMACRO_BG_BIAS_CTRL_0,
+		EMC_CFG_3,
+		EMC_PMACRO_TX_PWRD_0,
+		EMC_PMACRO_TX_PWRD_1,
+		EMC_PMACRO_TX_PWRD_2,
+		EMC_PMACRO_TX_PWRD_3,
+		EMC_PMACRO_TX_PWRD_4,
+		EMC_PMACRO_TX_PWRD_5,
+		EMC_CONFIG_SAMPLE_DELAY,
+		EMC_PMACRO_TX_SEL_CLK_SRC_0,
+		EMC_PMACRO_TX_SEL_CLK_SRC_1,
+		EMC_PMACRO_TX_SEL_CLK_SRC_2,
+		EMC_PMACRO_TX_SEL_CLK_SRC_3,
+		EMC_PMACRO_TX_SEL_CLK_SRC_4,
+		EMC_PMACRO_TX_SEL_CLK_SRC_5,
+		EMC_PMACRO_DDLL_BYPASS,
+		EMC_PMACRO_DDLL_PWRD_0,
+		EMC_PMACRO_DDLL_PWRD_1,
+		EMC_PMACRO_DDLL_PWRD_2,
+		EMC_PMACRO_CMD_CTRL_0,
+		EMC_PMACRO_CMD_CTRL_1,
+		EMC_PMACRO_CMD_CTRL_2,
+		EMC_TR_TIMING_0,
+		EMC_TR_DVFS,
+		EMC_TR_CTRL_1,
+		EMC_TR_RDV,
+		EMC_TR_QPOP,
+		EMC_TR_RDV_MASK,
+		EMC_MRW14,
+		EMC_TR_QSAFE,
+		EMC_TR_QRST,
+		EMC_TRAINING_CTRL,
+		EMC_TRAINING_SETTLE,
+		EMC_TRAINING_VREF_SETTLE,
+		EMC_TRAINING_CA_FINE_CTRL,
+		EMC_TRAINING_CA_CTRL_MISC,
+		EMC_TRAINING_CA_CTRL_MISC1,
+		EMC_TRAINING_CA_VREF_CTRL,
+		EMC_TRAINING_QUSE_CORS_CTRL,
+		EMC_TRAINING_QUSE_FINE_CTRL,
+		EMC_TRAINING_QUSE_CTRL_MISC,
+		EMC_TRAINING_QUSE_VREF_CTRL,
+		EMC_TRAINING_READ_FINE_CTRL,
+		EMC_TRAINING_READ_CTRL_MISC,
+		EMC_TRAINING_READ_VREF_CTRL,
+		EMC_TRAINING_WRITE_FINE_CTRL,
+		EMC_TRAINING_WRITE_CTRL_MISC,
+		EMC_TRAINING_WRITE_VREF_CTRL,
+		EMC_TRAINING_MPC,
+		EMC_MRW15,
+	},
+	.trim = {
+		EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_0,
+		EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_1,
+		EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_2,
+		EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_3,
+		EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_0,
+		EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_1,
+		EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_2,
+		EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_3,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE0_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE0_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE0_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE1_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE1_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE1_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE2_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE2_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE2_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE3_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE3_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE3_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE4_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE4_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE4_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE5_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE5_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE5_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE6_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE6_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE6_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE7_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE7_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE7_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE0_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE0_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE0_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE1_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE1_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE1_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE2_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE2_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE2_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE3_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE3_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE3_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE4_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE4_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE4_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE5_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE5_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE5_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE6_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE6_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE6_2,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE7_0,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE7_1,
+		EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE7_2,
+		EMC_PMACRO_IB_VREF_DQS_0,
+		EMC_PMACRO_IB_VREF_DQS_1,
+		EMC_PMACRO_IB_VREF_DQ_0,
+		EMC_PMACRO_IB_VREF_DQ_1,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_4,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_5,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2,
+		EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE0_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE0_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE0_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE1_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE1_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE1_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE2_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE2_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE2_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE3_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE3_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE3_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE4_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE4_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE4_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE5_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE5_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE5_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE6_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE6_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE6_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE7_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE7_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE7_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD0_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD0_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD0_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD1_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD1_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD1_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD2_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD2_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD2_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD3_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD3_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD3_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE0_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE0_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE0_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE1_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE1_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE1_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE2_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE2_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE2_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE3_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE3_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE3_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE4_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE4_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE4_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE5_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE5_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE5_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE6_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE6_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE6_2,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE7_0,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE7_1,
+		EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE7_2,
+		EMC_PMACRO_QUSE_DDLL_RANK0_0,
+		EMC_PMACRO_QUSE_DDLL_RANK0_1,
+		EMC_PMACRO_QUSE_DDLL_RANK0_2,
+		EMC_PMACRO_QUSE_DDLL_RANK0_3,
+		EMC_PMACRO_QUSE_DDLL_RANK1_0,
+		EMC_PMACRO_QUSE_DDLL_RANK1_1,
+		EMC_PMACRO_QUSE_DDLL_RANK1_2,
+		EMC_PMACRO_QUSE_DDLL_RANK1_3
+	},
+	.burst_mc = {
+		MC_EMEM_ARB_CFG,
+		MC_EMEM_ARB_OUTSTANDING_REQ,
+		MC_EMEM_ARB_REFPB_HP_CTRL,
+		MC_EMEM_ARB_REFPB_BANK_CTRL,
+		MC_EMEM_ARB_TIMING_RCD,
+		MC_EMEM_ARB_TIMING_RP,
+		MC_EMEM_ARB_TIMING_RC,
+		MC_EMEM_ARB_TIMING_RAS,
+		MC_EMEM_ARB_TIMING_FAW,
+		MC_EMEM_ARB_TIMING_RRD,
+		MC_EMEM_ARB_TIMING_RAP2PRE,
+		MC_EMEM_ARB_TIMING_WAP2PRE,
+		MC_EMEM_ARB_TIMING_R2R,
+		MC_EMEM_ARB_TIMING_W2W,
+		MC_EMEM_ARB_TIMING_R2W,
+		MC_EMEM_ARB_TIMING_CCDMW,
+		MC_EMEM_ARB_TIMING_W2R,
+		MC_EMEM_ARB_TIMING_RFCPB,
+		MC_EMEM_ARB_DA_TURNS,
+		MC_EMEM_ARB_DA_COVERS,
+		MC_EMEM_ARB_MISC0,
+		MC_EMEM_ARB_MISC1,
+		MC_EMEM_ARB_MISC2,
+		MC_EMEM_ARB_RING1_THROTTLE,
+		MC_EMEM_ARB_DHYST_CTRL,
+		MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_0,
+		MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_1,
+		MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_2,
+		MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_3,
+		MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_4,
+		MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_5,
+		MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_6,
+		MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_7,
+	},
+	.la_scale = {
+		MC_MLL_MPCORER_PTSA_RATE,
+		MC_FTOP_PTSA_RATE,
+		MC_PTSA_GRANT_DECREMENT,
+		MC_LATENCY_ALLOWANCE_XUSB_0,
+		MC_LATENCY_ALLOWANCE_XUSB_1,
+		MC_LATENCY_ALLOWANCE_TSEC_0,
+		MC_LATENCY_ALLOWANCE_SDMMCA_0,
+		MC_LATENCY_ALLOWANCE_SDMMCAA_0,
+		MC_LATENCY_ALLOWANCE_SDMMC_0,
+		MC_LATENCY_ALLOWANCE_SDMMCAB_0,
+		MC_LATENCY_ALLOWANCE_PPCS_0,
+		MC_LATENCY_ALLOWANCE_PPCS_1,
+		MC_LATENCY_ALLOWANCE_MPCORE_0,
+		MC_LATENCY_ALLOWANCE_HC_0,
+		MC_LATENCY_ALLOWANCE_HC_1,
+		MC_LATENCY_ALLOWANCE_AVPC_0,
+		MC_LATENCY_ALLOWANCE_GPU_0,
+		MC_LATENCY_ALLOWANCE_GPU2_0,
+		MC_LATENCY_ALLOWANCE_NVENC_0,
+		MC_LATENCY_ALLOWANCE_NVDEC_0,
+		MC_LATENCY_ALLOWANCE_VIC_0,
+		MC_LATENCY_ALLOWANCE_VI2_0,
+		MC_LATENCY_ALLOWANCE_ISP2_0,
+		MC_LATENCY_ALLOWANCE_ISP2_1,
+	},
+	.burst_per_channel = {
+		{ .bank = 0, .offset = EMC_MRW10, },
+		{ .bank = 1, .offset = EMC_MRW10, },
+		{ .bank = 0, .offset = EMC_MRW11, },
+		{ .bank = 1, .offset = EMC_MRW11, },
+		{ .bank = 0, .offset = EMC_MRW12, },
+		{ .bank = 1, .offset = EMC_MRW12, },
+		{ .bank = 0, .offset = EMC_MRW13, },
+		{ .bank = 1, .offset = EMC_MRW13, },
+	},
+	.trim_per_channel = {
+		{ .bank = 0, .offset = EMC_CMD_BRLSHFT_0, },
+		{ .bank = 1, .offset = EMC_CMD_BRLSHFT_1, },
+		{ .bank = 0, .offset = EMC_DATA_BRLSHFT_0, },
+		{ .bank = 1, .offset = EMC_DATA_BRLSHFT_0, },
+		{ .bank = 0, .offset = EMC_DATA_BRLSHFT_1, },
+		{ .bank = 1, .offset = EMC_DATA_BRLSHFT_1, },
+		{ .bank = 0, .offset = EMC_QUSE_BRLSHFT_0, },
+		{ .bank = 1, .offset = EMC_QUSE_BRLSHFT_1, },
+		{ .bank = 0, .offset = EMC_QUSE_BRLSHFT_2, },
+		{ .bank = 1, .offset = EMC_QUSE_BRLSHFT_3, },
+	},
+	.vref_per_channel = {
+		{
+			.bank = 0,
+			.offset = EMC_TRAINING_OPT_DQS_IB_VREF_RANK0,
+		}, {
+			.bank = 1,
+			.offset = EMC_TRAINING_OPT_DQS_IB_VREF_RANK0,
+		}, {
+			.bank = 0,
+			.offset = EMC_TRAINING_OPT_DQS_IB_VREF_RANK1,
+		}, {
+			.bank = 1,
+			.offset = EMC_TRAINING_OPT_DQS_IB_VREF_RANK1,
+		},
+	},
+};
+
+static void tegra210_emc_train(struct timer_list *timer)
+{
+	struct tegra210_emc *emc = from_timer(emc, timer, training);
+	unsigned long flags;
+
+	if (!emc->last)
+		return;
+
+	spin_lock_irqsave(&emc->lock, flags);
+
+	if (emc->sequence->periodic_compensation)
+		emc->sequence->periodic_compensation(emc);
+
+	spin_unlock_irqrestore(&emc->lock, flags);
+
+	mod_timer(&emc->training,
+		  jiffies + msecs_to_jiffies(emc->training_interval));
+}
+
+static void tegra210_emc_training_start(struct tegra210_emc *emc)
+{
+	mod_timer(&emc->training,
+		  jiffies + msecs_to_jiffies(emc->training_interval));
+}
+
+static void tegra210_emc_training_stop(struct tegra210_emc *emc)
+{
+	del_timer(&emc->training);
+}
+
+static unsigned int tegra210_emc_get_temperature(struct tegra210_emc *emc)
+{
+	unsigned long flags;
+	u32 value, max = 0;
+	unsigned int i;
+
+	spin_lock_irqsave(&emc->lock, flags);
+
+	for (i = 0; i < emc->num_devices; i++) {
+		value = tegra210_emc_mrr_read(emc, i, 4);
+
+		if (value & BIT(7))
+			dev_dbg(emc->dev,
+				"sensor reading changed for device %u: %08x\n",
+				i, value);
+
+		value = FIELD_GET(LPDDR2_MR4_SRR, value);
+		if (value > max)
+			max = value;
+	}
+
+	spin_unlock_irqrestore(&emc->lock, flags);
+
+	return max;
+}
+
+static void tegra210_emc_poll_refresh(struct timer_list *timer)
+{
+	struct tegra210_emc *emc = from_timer(emc, timer, refresh_timer);
+	unsigned int temperature;
+
+	if (!emc->debugfs.temperature)
+		temperature = tegra210_emc_get_temperature(emc);
+	else
+		temperature = emc->debugfs.temperature;
+
+	if (temperature == emc->temperature)
+		goto reset;
+
+	switch (temperature) {
+	case 0 ... 3:
+		/* temperature is fine, using regular refresh */
+		dev_dbg(emc->dev, "switching to nominal refresh...\n");
+		tegra210_emc_set_refresh(emc, TEGRA210_EMC_REFRESH_NOMINAL);
+		break;
+
+	case 4:
+		dev_dbg(emc->dev, "switching to 2x refresh...\n");
+		tegra210_emc_set_refresh(emc, TEGRA210_EMC_REFRESH_2X);
+		break;
+
+	case 5:
+		dev_dbg(emc->dev, "switching to 4x refresh...\n");
+		tegra210_emc_set_refresh(emc, TEGRA210_EMC_REFRESH_4X);
+		break;
+
+	case 6 ... 7:
+		dev_dbg(emc->dev, "switching to throttle refresh...\n");
+		tegra210_emc_set_refresh(emc, TEGRA210_EMC_REFRESH_THROTTLE);
+		break;
+
+	default:
+		WARN(1, "invalid DRAM temperature state %u\n", temperature);
+		return;
+	}
+
+	emc->temperature = temperature;
+
+reset:
+	if (atomic_read(&emc->refresh_poll) > 0) {
+		unsigned int interval = emc->refresh_poll_interval;
+		unsigned int timeout = msecs_to_jiffies(interval);
+
+		mod_timer(&emc->refresh_timer, jiffies + timeout);
+	}
+}
+
+static void tegra210_emc_poll_refresh_stop(struct tegra210_emc *emc)
+{
+	atomic_set(&emc->refresh_poll, 0);
+	del_timer_sync(&emc->refresh_timer);
+}
+
+static void tegra210_emc_poll_refresh_start(struct tegra210_emc *emc)
+{
+	atomic_set(&emc->refresh_poll, 1);
+
+	mod_timer(&emc->refresh_timer,
+		  jiffies + msecs_to_jiffies(emc->refresh_poll_interval));
+}
+
+static int tegra210_emc_cd_max_state(struct thermal_cooling_device *cd,
+				     unsigned long *state)
+{
+	*state = 1;
+
+	return 0;
+}
+
+static int tegra210_emc_cd_get_state(struct thermal_cooling_device *cd,
+				     unsigned long *state)
+{
+	struct tegra210_emc *emc = cd->devdata;
+
+	*state = atomic_read(&emc->refresh_poll);
+
+	return 0;
+}
+
+static int tegra210_emc_cd_set_state(struct thermal_cooling_device *cd,
+				     unsigned long state)
+{
+	struct tegra210_emc *emc = cd->devdata;
+
+	if (state == atomic_read(&emc->refresh_poll))
+		return 0;
+
+	if (state)
+		tegra210_emc_poll_refresh_start(emc);
+	else
+		tegra210_emc_poll_refresh_stop(emc);
+
+	return 0;
+}
+
+static struct thermal_cooling_device_ops tegra210_emc_cd_ops = {
+	.get_max_state = tegra210_emc_cd_max_state,
+	.get_cur_state = tegra210_emc_cd_get_state,
+	.set_cur_state = tegra210_emc_cd_set_state,
+};
+
+static void tegra210_emc_set_clock(struct tegra210_emc *emc, u32 clksrc)
+{
+	emc->sequence->set_clock(emc, clksrc);
+
+	if (emc->next->periodic_training)
+		tegra210_emc_training_start(emc);
+	else
+		tegra210_emc_training_stop(emc);
+}
+
+static void tegra210_change_dll_src(struct tegra210_emc *emc,
+				    u32 clksrc)
+{
+	u32 dll_setting = emc->next->dll_clk_src;
+	u32 emc_clk_src;
+	u32 emc_clk_div;
+
+	emc_clk_src = (clksrc & EMC_CLK_EMC_2X_CLK_SRC_MASK) >>
+		       EMC_CLK_EMC_2X_CLK_SRC_SHIFT;
+	emc_clk_div = (clksrc & EMC_CLK_EMC_2X_CLK_DIVISOR_MASK) >>
+		       EMC_CLK_EMC_2X_CLK_DIVISOR_SHIFT;
+
+	dll_setting &= ~(DLL_CLK_EMC_DLL_CLK_SRC_MASK |
+			 DLL_CLK_EMC_DLL_CLK_DIVISOR_MASK);
+	dll_setting |= emc_clk_src << DLL_CLK_EMC_DLL_CLK_SRC_SHIFT;
+	dll_setting |= emc_clk_div << DLL_CLK_EMC_DLL_CLK_DIVISOR_SHIFT;
+
+	dll_setting &= ~DLL_CLK_EMC_DLL_DDLL_CLK_SEL_MASK;
+	if (emc_clk_src == EMC_CLK_SOURCE_PLLMB_LJ)
+		dll_setting |= (PLLM_VCOB <<
+				DLL_CLK_EMC_DLL_DDLL_CLK_SEL_SHIFT);
+	else if (emc_clk_src == EMC_CLK_SOURCE_PLLM_LJ)
+		dll_setting |= (PLLM_VCOA <<
+				DLL_CLK_EMC_DLL_DDLL_CLK_SEL_SHIFT);
+	else
+		dll_setting |= (EMC_DLL_SWITCH_OUT <<
+				DLL_CLK_EMC_DLL_DDLL_CLK_SEL_SHIFT);
+
+	tegra210_clk_emc_dll_update_setting(dll_setting);
+
+	if (emc->next->clk_out_enb_x_0_clk_enb_emc_dll)
+		tegra210_clk_emc_dll_enable(true);
+	else
+		tegra210_clk_emc_dll_enable(false);
+}
+
+int tegra210_emc_set_refresh(struct tegra210_emc *emc,
+			     enum tegra210_emc_refresh refresh)
+{
+	struct tegra210_emc_timing *timings;
+	unsigned long flags;
+
+	if ((emc->dram_type != DRAM_TYPE_LPDDR2 &&
+	     emc->dram_type != DRAM_TYPE_LPDDR4) ||
+	    !emc->last)
+		return -ENODEV;
+
+	if (refresh > TEGRA210_EMC_REFRESH_THROTTLE)
+		return -EINVAL;
+
+	if (refresh == emc->refresh)
+		return 0;
+
+	spin_lock_irqsave(&emc->lock, flags);
+
+	if (refresh == TEGRA210_EMC_REFRESH_THROTTLE && emc->derated)
+		timings = emc->derated;
+	else
+		timings = emc->nominal;
+
+	if (timings != emc->timings) {
+		unsigned int index = emc->last - emc->timings;
+		u32 clksrc;
+
+		clksrc = emc->provider.configs[index].value |
+			 EMC_CLK_FORCE_CC_TRIGGER;
+
+		emc->next = &timings[index];
+		emc->timings = timings;
+
+		tegra210_emc_set_clock(emc, clksrc);
+	} else {
+		tegra210_emc_adjust_timing(emc, emc->last);
+		tegra210_emc_timing_update(emc);
+
+		if (refresh != TEGRA210_EMC_REFRESH_NOMINAL)
+			emc_writel(emc, EMC_REF_REF_CMD, EMC_REF);
+	}
+
+	spin_unlock_irqrestore(&emc->lock, flags);
+
+	return 0;
+}
+
+u32 tegra210_emc_mrr_read(struct tegra210_emc *emc, unsigned int chip,
+			  unsigned int address)
+{
+	u32 value, ret = 0;
+	unsigned int i;
+
+	value = (chip & EMC_MRR_DEV_SEL_MASK) << EMC_MRR_DEV_SEL_SHIFT |
+		(address & EMC_MRR_MA_MASK) << EMC_MRR_MA_SHIFT;
+	emc_writel(emc, value, EMC_MRR);
+
+	for (i = 0; i < emc->num_channels; i++)
+		WARN(tegra210_emc_wait_for_update(emc, i, EMC_EMC_STATUS,
+						  EMC_EMC_STATUS_MRR_DIVLD, 1),
+		     "Timed out waiting for MRR %u (ch=%u)\n", address, i);
+
+	for (i = 0; i < emc->num_channels; i++) {
+		value = emc_channel_readl(emc, i, EMC_MRR);
+		value &= EMC_MRR_DATA_MASK;
+
+		ret = (ret << 16) | value;
+	}
+
+	return ret;
+}
+
+void tegra210_emc_do_clock_change(struct tegra210_emc *emc, u32 clksrc)
+{
+	int err;
+
+	mc_readl(emc->mc, MC_EMEM_ADR_CFG);
+	emc_readl(emc, EMC_INTSTATUS);
+
+	tegra210_clk_emc_update_setting(clksrc);
+
+	err = tegra210_emc_wait_for_update(emc, 0, EMC_INTSTATUS,
+					   EMC_INTSTATUS_CLKCHANGE_COMPLETE,
+					   true);
+	if (err)
+		dev_warn(emc->dev, "clock change completion error: %d\n", err);
+}
+
+struct tegra210_emc_timing *tegra210_emc_find_timing(struct tegra210_emc *emc,
+						     unsigned long rate)
+{
+	unsigned int i;
+
+	for (i = 0; i < emc->num_timings; i++)
+		if (emc->timings[i].rate * 1000UL == rate)
+			return &emc->timings[i];
+
+	return NULL;
+}
+
+int tegra210_emc_wait_for_update(struct tegra210_emc *emc, unsigned int channel,
+				 unsigned int offset, u32 bit_mask, bool state)
+{
+	unsigned int i;
+	u32 value;
+
+	for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; i++) {
+		value = emc_channel_readl(emc, channel, offset);
+		if (!!(value & bit_mask) == state)
+			return 0;
+
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+void tegra210_emc_set_shadow_bypass(struct tegra210_emc *emc, int set)
+{
+	u32 emc_dbg = emc_readl(emc, EMC_DBG);
+
+	if (set)
+		emc_writel(emc, emc_dbg | EMC_DBG_WRITE_MUX_ACTIVE, EMC_DBG);
+	else
+		emc_writel(emc, emc_dbg & ~EMC_DBG_WRITE_MUX_ACTIVE, EMC_DBG);
+}
+
+u32 tegra210_emc_get_dll_state(struct tegra210_emc_timing *next)
+{
+	if (next->emc_emrs & 0x1)
+		return 0;
+
+	return 1;
+}
+
+void tegra210_emc_timing_update(struct tegra210_emc *emc)
+{
+	unsigned int i;
+	int err = 0;
+
+	emc_writel(emc, 0x1, EMC_TIMING_CONTROL);
+
+	for (i = 0; i < emc->num_channels; i++) {
+		err |= tegra210_emc_wait_for_update(emc, i, EMC_EMC_STATUS,
+						    EMC_EMC_STATUS_TIMING_UPDATE_STALLED,
+						    false);
+	}
+
+	if (err)
+		dev_warn(emc->dev, "timing update error: %d\n", err);
+}
+
+unsigned long tegra210_emc_actual_osc_clocks(u32 in)
+{
+	if (in < 0x40)
+		return in * 16;
+	else if (in < 0x80)
+		return 2048;
+	else if (in < 0xc0)
+		return 4096;
+	else
+		return 8192;
+}
+
+void tegra210_emc_start_periodic_compensation(struct tegra210_emc *emc)
+{
+	u32 mpc_req = 0x4b;
+
+	emc_writel(emc, mpc_req, EMC_MPC);
+	mpc_req = emc_readl(emc, EMC_MPC);
+}
+
+u32 tegra210_emc_compensate(struct tegra210_emc_timing *next, u32 offset)
+{
+	u32 temp = 0, rate = next->rate / 1000;
+	s32 delta[4], delta_taps[4];
+	s32 new[] = {
+		TRIM_REG(0, 0, 0, 0),
+		TRIM_REG(0, 0, 0, 1),
+		TRIM_REG(0, 0, 1, 2),
+		TRIM_REG(0, 0, 1, 3),
+
+		TRIM_REG(1, 0, 2, 4),
+		TRIM_REG(1, 0, 2, 5),
+		TRIM_REG(1, 0, 3, 6),
+		TRIM_REG(1, 0, 3, 7),
+
+		TRIM_REG(0, 1, 0, 0),
+		TRIM_REG(0, 1, 0, 1),
+		TRIM_REG(0, 1, 1, 2),
+		TRIM_REG(0, 1, 1, 3),
+
+		TRIM_REG(1, 1, 2, 4),
+		TRIM_REG(1, 1, 2, 5),
+		TRIM_REG(1, 1, 3, 6),
+		TRIM_REG(1, 1, 3, 7)
+	};
+	unsigned i;
+
+	switch (offset) {
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0:
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1:
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2:
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3:
+	case EMC_DATA_BRLSHFT_0:
+		delta[0] = 128 * (next->current_dram_clktree[C0D0U0] -
+				  next->trained_dram_clktree[C0D0U0]);
+		delta[1] = 128 * (next->current_dram_clktree[C0D0U1] -
+				  next->trained_dram_clktree[C0D0U1]);
+		delta[2] = 128 * (next->current_dram_clktree[C1D0U0] -
+				  next->trained_dram_clktree[C1D0U0]);
+		delta[3] = 128 * (next->current_dram_clktree[C1D0U1] -
+				  next->trained_dram_clktree[C1D0U1]);
+
+		delta_taps[0] = (delta[0] * (s32)rate) / 1000000;
+		delta_taps[1] = (delta[1] * (s32)rate) / 1000000;
+		delta_taps[2] = (delta[2] * (s32)rate) / 1000000;
+		delta_taps[3] = (delta[3] * (s32)rate) / 1000000;
+
+		for (i = 0; i < 4; i++) {
+			if ((delta_taps[i] > next->tree_margin) ||
+			    (delta_taps[i] < (-1 * next->tree_margin))) {
+				new[i * 2] = new[i * 2] + delta_taps[i];
+				new[i * 2 + 1] = new[i * 2 + 1] +
+							delta_taps[i];
+			}
+		}
+
+		if (offset == EMC_DATA_BRLSHFT_0) {
+			for (i = 0; i < 8; i++)
+				new[i] = new[i] / 64;
+		} else {
+			for (i = 0; i < 8; i++)
+				new[i] = new[i] % 64;
+		}
+
+		break;
+
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0:
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1:
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2:
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3:
+	case EMC_DATA_BRLSHFT_1:
+		delta[0] = 128 * (next->current_dram_clktree[C0D1U0] -
+				  next->trained_dram_clktree[C0D1U0]);
+		delta[1] = 128 * (next->current_dram_clktree[C0D1U1] -
+				  next->trained_dram_clktree[C0D1U1]);
+		delta[2] = 128 * (next->current_dram_clktree[C1D1U0] -
+				  next->trained_dram_clktree[C1D1U0]);
+		delta[3] = 128 * (next->current_dram_clktree[C1D1U1] -
+				  next->trained_dram_clktree[C1D1U1]);
+
+		delta_taps[0] = (delta[0] * (s32)rate) / 1000000;
+		delta_taps[1] = (delta[1] * (s32)rate) / 1000000;
+		delta_taps[2] = (delta[2] * (s32)rate) / 1000000;
+		delta_taps[3] = (delta[3] * (s32)rate) / 1000000;
+
+		for (i = 0; i < 4; i++) {
+			if ((delta_taps[i] > next->tree_margin) ||
+			    (delta_taps[i] < (-1 * next->tree_margin))) {
+				new[8 + i * 2] = new[8 + i * 2] +
+							delta_taps[i];
+				new[8 + i * 2 + 1] = new[8 + i * 2 + 1] +
+							delta_taps[i];
+			}
+		}
+
+		if (offset == EMC_DATA_BRLSHFT_1) {
+			for (i = 0; i < 8; i++)
+				new[i + 8] = new[i + 8] / 64;
+		} else {
+			for (i = 0; i < 8; i++)
+				new[i + 8] = new[i + 8] % 64;
+		}
+
+		break;
+	}
+
+	switch (offset) {
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0:
+		temp = CALC_TEMP(0, 0, 0, 1, 0);
+		break;
+
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1:
+		temp = CALC_TEMP(0, 1, 2, 3, 2);
+		break;
+
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2:
+		temp = CALC_TEMP(0, 2, 4, 5, 4);
+		break;
+
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3:
+		temp = CALC_TEMP(0, 3, 6, 7, 6);
+		break;
+
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0:
+		temp = CALC_TEMP(1, 0, 0, 1, 8);
+		break;
+
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1:
+		temp = CALC_TEMP(1, 1, 2, 3, 10);
+		break;
+
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2:
+		temp = CALC_TEMP(1, 2, 4, 5, 12);
+		break;
+
+	case EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3:
+		temp = CALC_TEMP(1, 3, 6, 7, 14);
+		break;
+
+	case EMC_DATA_BRLSHFT_0:
+		temp = ((new[0] <<
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE0_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE0_DATA_BRLSHFT_MASK) |
+		       ((new[1] <<
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE1_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE1_DATA_BRLSHFT_MASK) |
+		       ((new[2] <<
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE2_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE2_DATA_BRLSHFT_MASK) |
+		       ((new[3] <<
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE3_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE3_DATA_BRLSHFT_MASK) |
+		       ((new[4] <<
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE4_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE4_DATA_BRLSHFT_MASK) |
+		       ((new[5] <<
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE5_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE5_DATA_BRLSHFT_MASK) |
+		       ((new[6] <<
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE6_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE6_DATA_BRLSHFT_MASK) |
+		       ((new[7] <<
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE7_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_0_RANK0_BYTE7_DATA_BRLSHFT_MASK);
+		break;
+
+	case EMC_DATA_BRLSHFT_1:
+		temp = ((new[8] <<
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE0_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE0_DATA_BRLSHFT_MASK) |
+		       ((new[9] <<
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE1_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE1_DATA_BRLSHFT_MASK) |
+		       ((new[10] <<
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE2_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE2_DATA_BRLSHFT_MASK) |
+		       ((new[11] <<
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE3_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE3_DATA_BRLSHFT_MASK) |
+		       ((new[12] <<
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE4_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE4_DATA_BRLSHFT_MASK) |
+		       ((new[13] <<
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE5_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE5_DATA_BRLSHFT_MASK) |
+		       ((new[14] <<
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE6_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE6_DATA_BRLSHFT_MASK) |
+		       ((new[15] <<
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE7_DATA_BRLSHFT_SHIFT) &
+			 EMC_DATA_BRLSHFT_1_RANK1_BYTE7_DATA_BRLSHFT_MASK);
+		break;
+
+	default:
+		break;
+	}
+
+	return temp;
+}
+
+u32 tegra210_emc_dll_prelock(struct tegra210_emc *emc, u32 clksrc)
+{
+	unsigned int i;
+	u32 value;
+
+	value = emc_readl(emc, EMC_CFG_DIG_DLL);
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_LOCK_LIMIT_MASK;
+	value |= (3 << EMC_CFG_DIG_DLL_CFG_DLL_LOCK_LIMIT_SHIFT);
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_EN;
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_MODE_MASK;
+	value |= (3 << EMC_CFG_DIG_DLL_CFG_DLL_MODE_SHIFT);
+	value |= EMC_CFG_DIG_DLL_CFG_DLL_STALL_ALL_TRAFFIC;
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_STALL_RW_UNTIL_LOCK;
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_STALL_ALL_UNTIL_LOCK;
+	emc_writel(emc, value, EMC_CFG_DIG_DLL);
+	emc_writel(emc, 1, EMC_TIMING_CONTROL);
+
+	for (i = 0; i < emc->num_channels; i++)
+		tegra210_emc_wait_for_update(emc, i, EMC_EMC_STATUS,
+					     EMC_EMC_STATUS_TIMING_UPDATE_STALLED,
+					     0);
+
+	for (i = 0; i < emc->num_channels; i++) {
+		while (true) {
+			value = emc_channel_readl(emc, i, EMC_CFG_DIG_DLL);
+			if ((value & EMC_CFG_DIG_DLL_CFG_DLL_EN) == 0)
+				break;
+		}
+	}
+
+	value = emc->next->burst_regs[EMC_DLL_CFG_0_INDEX];
+	emc_writel(emc, value, EMC_DLL_CFG_0);
+
+	value = emc_readl(emc, EMC_DLL_CFG_1);
+	value &= EMC_DLL_CFG_1_DDLLCAL_CTRL_START_TRIM_MASK;
+
+	if (emc->next->rate >= 400000 && emc->next->rate < 600000)
+		value |= 150;
+	else if (emc->next->rate >= 600000 && emc->next->rate < 800000)
+		value |= 100;
+	else if (emc->next->rate >= 800000 && emc->next->rate < 1000000)
+		value |= 70;
+	else if (emc->next->rate >= 1000000 && emc->next->rate < 1200000)
+		value |= 30;
+	else
+		value |= 20;
+
+	emc_writel(emc, value, EMC_DLL_CFG_1);
+
+	tegra210_change_dll_src(emc, clksrc);
+
+	value = emc_readl(emc, EMC_CFG_DIG_DLL);
+	value |= EMC_CFG_DIG_DLL_CFG_DLL_EN;
+	emc_writel(emc, value, EMC_CFG_DIG_DLL);
+
+	tegra210_emc_timing_update(emc);
+
+	for (i = 0; i < emc->num_channels; i++) {
+		while (true) {
+			value = emc_channel_readl(emc, 0, EMC_CFG_DIG_DLL);
+			if (value & EMC_CFG_DIG_DLL_CFG_DLL_EN)
+				break;
+		}
+	}
+
+	while (true) {
+		value = emc_readl(emc, EMC_DIG_DLL_STATUS);
+
+		if ((value & EMC_DIG_DLL_STATUS_DLL_PRIV_UPDATED) == 0)
+			continue;
+
+		if ((value & EMC_DIG_DLL_STATUS_DLL_LOCK) == 0)
+			continue;
+
+		break;
+	}
+
+	value = emc_readl(emc, EMC_DIG_DLL_STATUS);
+
+	return value & EMC_DIG_DLL_STATUS_DLL_OUT_MASK;
+}
+
+u32 tegra210_emc_dvfs_power_ramp_up(struct tegra210_emc *emc, u32 clk,
+				    bool flip_backward)
+{
+	u32 cmd_pad, dq_pad, rfu1, cfg5, common_tx, ramp_up_wait = 0;
+	const struct tegra210_emc_timing *timing;
+
+	if (flip_backward)
+		timing = emc->last;
+	else
+		timing = emc->next;
+
+	cmd_pad = timing->burst_regs[EMC_PMACRO_CMD_PAD_TX_CTRL_INDEX];
+	dq_pad = timing->burst_regs[EMC_PMACRO_DATA_PAD_TX_CTRL_INDEX];
+	rfu1 = timing->burst_regs[EMC_PMACRO_BRICK_CTRL_RFU1_INDEX];
+	cfg5 = timing->burst_regs[EMC_FBIO_CFG5_INDEX];
+	common_tx = timing->burst_regs[EMC_PMACRO_COMMON_PAD_TX_CTRL_INDEX];
+
+	cmd_pad |= EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_DRVFORCEON;
+
+	if (clk < 1000000 / DVFS_FGCG_MID_SPEED_THRESHOLD) {
+		ccfifo_writel(emc, common_tx & 0xa,
+			      EMC_PMACRO_COMMON_PAD_TX_CTRL, 0);
+		ccfifo_writel(emc, common_tx & 0xf,
+			      EMC_PMACRO_COMMON_PAD_TX_CTRL,
+			      (100000 / clk) + 1);
+		ramp_up_wait += 100000;
+	} else {
+		ccfifo_writel(emc, common_tx | 0x8,
+			      EMC_PMACRO_COMMON_PAD_TX_CTRL, 0);
+	}
+
+	if (clk < 1000000 / DVFS_FGCG_HIGH_SPEED_THRESHOLD) {
+		if (clk < 1000000 / IOBRICK_DCC_THRESHOLD) {
+			cmd_pad |=
+				EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSP_TX_E_DCC |
+				EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSN_TX_E_DCC;
+			cmd_pad &=
+				~(EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_E_DCC |
+				  EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_CMD_TX_E_DCC);
+			ccfifo_writel(emc, cmd_pad,
+				      EMC_PMACRO_CMD_PAD_TX_CTRL,
+				      (100000 / clk) + 1);
+			ramp_up_wait += 100000;
+
+			dq_pad |=
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSP_TX_E_DCC |
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSN_TX_E_DCC;
+			dq_pad &=
+			       ~(EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_TX_E_DCC |
+				 EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_CMD_TX_E_DCC);
+			ccfifo_writel(emc, dq_pad,
+				      EMC_PMACRO_DATA_PAD_TX_CTRL, 0);
+			ccfifo_writel(emc, rfu1 & 0xfe40fe40,
+				      EMC_PMACRO_BRICK_CTRL_RFU1, 0);
+		} else {
+			ccfifo_writel(emc, rfu1 & 0xfe40fe40,
+				      EMC_PMACRO_BRICK_CTRL_RFU1,
+				      (100000 / clk) + 1);
+			ramp_up_wait += 100000;
+		}
+
+		ccfifo_writel(emc, rfu1 & 0xfeedfeed,
+			      EMC_PMACRO_BRICK_CTRL_RFU1, (100000 / clk) + 1);
+		ramp_up_wait += 100000;
+
+		if (clk < 1000000 / IOBRICK_DCC_THRESHOLD) {
+			cmd_pad |=
+				EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSP_TX_E_DCC |
+				EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSN_TX_E_DCC |
+				EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_E_DCC |
+				EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_CMD_TX_E_DCC;
+			ccfifo_writel(emc, cmd_pad,
+				      EMC_PMACRO_CMD_PAD_TX_CTRL,
+				      (100000 / clk) + 1);
+			ramp_up_wait += 100000;
+
+			dq_pad |=
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSP_TX_E_DCC |
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSN_TX_E_DCC |
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_TX_E_DCC |
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_CMD_TX_E_DCC;
+			ccfifo_writel(emc, dq_pad,
+				      EMC_PMACRO_DATA_PAD_TX_CTRL, 0);
+			ccfifo_writel(emc, rfu1,
+				      EMC_PMACRO_BRICK_CTRL_RFU1, 0);
+		} else {
+			ccfifo_writel(emc, rfu1,
+				      EMC_PMACRO_BRICK_CTRL_RFU1,
+				      (100000 / clk) + 1);
+			ramp_up_wait += 100000;
+		}
+
+		ccfifo_writel(emc, cfg5 & ~EMC_FBIO_CFG5_CMD_TX_DIS,
+			      EMC_FBIO_CFG5, (100000 / clk) + 10);
+		ramp_up_wait += 100000 + (10 * clk);
+	} else if (clk < 1000000 / DVFS_FGCG_MID_SPEED_THRESHOLD) {
+		ccfifo_writel(emc, rfu1 | 0x06000600,
+			      EMC_PMACRO_BRICK_CTRL_RFU1, (100000 / clk) + 1);
+		ccfifo_writel(emc, cfg5 & ~EMC_FBIO_CFG5_CMD_TX_DIS,
+			      EMC_FBIO_CFG5, (100000 / clk) + 10);
+		ramp_up_wait += 100000 + 10 * clk;
+	} else {
+		ccfifo_writel(emc, rfu1 | 0x00000600,
+			      EMC_PMACRO_BRICK_CTRL_RFU1, 0);
+		ccfifo_writel(emc, cfg5 & ~EMC_FBIO_CFG5_CMD_TX_DIS,
+			      EMC_FBIO_CFG5, 12);
+		ramp_up_wait += 12 * clk;
+	}
+
+	cmd_pad &= ~EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_DRVFORCEON;
+	ccfifo_writel(emc, cmd_pad, EMC_PMACRO_CMD_PAD_TX_CTRL, 5);
+
+	return ramp_up_wait;
+}
+
+u32 tegra210_emc_dvfs_power_ramp_down(struct tegra210_emc *emc, u32 clk,
+				      bool flip_backward)
+{
+	u32 ramp_down_wait = 0, cmd_pad, dq_pad, rfu1, cfg5, common_tx;
+	const struct tegra210_emc_timing *entry;
+	u32 seq_wait;
+
+	if (flip_backward)
+		entry = emc->next;
+	else
+		entry = emc->last;
+
+	cmd_pad = entry->burst_regs[EMC_PMACRO_CMD_PAD_TX_CTRL_INDEX];
+	dq_pad = entry->burst_regs[EMC_PMACRO_DATA_PAD_TX_CTRL_INDEX];
+	rfu1 = entry->burst_regs[EMC_PMACRO_BRICK_CTRL_RFU1_INDEX];
+	cfg5 = entry->burst_regs[EMC_FBIO_CFG5_INDEX];
+	common_tx = entry->burst_regs[EMC_PMACRO_COMMON_PAD_TX_CTRL_INDEX];
+
+	cmd_pad |= EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_DRVFORCEON;
+
+	ccfifo_writel(emc, cmd_pad, EMC_PMACRO_CMD_PAD_TX_CTRL, 0);
+	ccfifo_writel(emc, cfg5 | EMC_FBIO_CFG5_CMD_TX_DIS,
+		      EMC_FBIO_CFG5, 12);
+	ramp_down_wait = 12 * clk;
+
+	seq_wait = (100000 / clk) + 1;
+
+	if (clk < (1000000 / DVFS_FGCG_HIGH_SPEED_THRESHOLD)) {
+		if (clk < (1000000 / IOBRICK_DCC_THRESHOLD)) {
+			cmd_pad &=
+				~(EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_E_DCC |
+				  EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_CMD_TX_E_DCC);
+			cmd_pad |=
+				EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSP_TX_E_DCC |
+				EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSN_TX_E_DCC;
+			ccfifo_writel(emc, cmd_pad,
+				      EMC_PMACRO_CMD_PAD_TX_CTRL, seq_wait);
+			ramp_down_wait += 100000;
+
+			dq_pad &=
+			      ~(EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_TX_E_DCC |
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_CMD_TX_E_DCC);
+			dq_pad |=
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSP_TX_E_DCC |
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSN_TX_E_DCC;
+			ccfifo_writel(emc, dq_pad,
+				      EMC_PMACRO_DATA_PAD_TX_CTRL, 0);
+			ccfifo_writel(emc, rfu1 & ~0x01120112,
+				      EMC_PMACRO_BRICK_CTRL_RFU1, 0);
+		} else {
+			ccfifo_writel(emc, rfu1 & ~0x01120112,
+				      EMC_PMACRO_BRICK_CTRL_RFU1, seq_wait);
+			ramp_down_wait += 100000;
+		}
+
+		ccfifo_writel(emc, rfu1 & ~0x01bf01bf,
+			      EMC_PMACRO_BRICK_CTRL_RFU1, seq_wait);
+		ramp_down_wait += 100000;
+
+		if (clk < (1000000 / IOBRICK_DCC_THRESHOLD)) {
+			cmd_pad &=
+				~(EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_E_DCC |
+				  EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_CMD_TX_E_DCC |
+				  EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSP_TX_E_DCC |
+				  EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSN_TX_E_DCC);
+			ccfifo_writel(emc, cmd_pad,
+				      EMC_PMACRO_CMD_PAD_TX_CTRL, seq_wait);
+			ramp_down_wait += 100000;
+
+			dq_pad &=
+			      ~(EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_TX_E_DCC |
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_CMD_TX_E_DCC |
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSP_TX_E_DCC |
+				EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSN_TX_E_DCC);
+			ccfifo_writel(emc, dq_pad,
+				      EMC_PMACRO_DATA_PAD_TX_CTRL, 0);
+			ccfifo_writel(emc, rfu1 & ~0x07ff07ff,
+				      EMC_PMACRO_BRICK_CTRL_RFU1, 0);
+		} else {
+			ccfifo_writel(emc, rfu1 & ~0x07ff07ff,
+				      EMC_PMACRO_BRICK_CTRL_RFU1, seq_wait);
+			ramp_down_wait += 100000;
+		}
+	} else {
+		ccfifo_writel(emc, rfu1 & ~0xffff07ff,
+			      EMC_PMACRO_BRICK_CTRL_RFU1, seq_wait + 19);
+		ramp_down_wait += 100000 + (20 * clk);
+	}
+
+	if (clk < (1000000 / DVFS_FGCG_MID_SPEED_THRESHOLD)) {
+		ramp_down_wait += 100000;
+		ccfifo_writel(emc, common_tx & ~0x5,
+			      EMC_PMACRO_COMMON_PAD_TX_CTRL, seq_wait);
+		ramp_down_wait += 100000;
+		ccfifo_writel(emc, common_tx & ~0xf,
+			      EMC_PMACRO_COMMON_PAD_TX_CTRL, seq_wait);
+		ramp_down_wait += 100000;
+		ccfifo_writel(emc, 0, 0, seq_wait);
+		ramp_down_wait += 100000;
+	} else {
+		ccfifo_writel(emc, common_tx & ~0xf,
+			      EMC_PMACRO_COMMON_PAD_TX_CTRL, seq_wait);
+	}
+
+	return ramp_down_wait;
+}
+
+void tegra210_emc_reset_dram_clktree_values(struct tegra210_emc_timing *timing)
+{
+	timing->current_dram_clktree[C0D0U0] =
+		timing->trained_dram_clktree[C0D0U0];
+	timing->current_dram_clktree[C0D0U1] =
+		timing->trained_dram_clktree[C0D0U1];
+	timing->current_dram_clktree[C1D0U0] =
+		timing->trained_dram_clktree[C1D0U0];
+	timing->current_dram_clktree[C1D0U1] =
+		timing->trained_dram_clktree[C1D0U1];
+	timing->current_dram_clktree[C1D1U0] =
+		timing->trained_dram_clktree[C1D1U0];
+	timing->current_dram_clktree[C1D1U1] =
+		timing->trained_dram_clktree[C1D1U1];
+}
+
+static void update_dll_control(struct tegra210_emc *emc, u32 value, bool state)
+{
+	unsigned int i;
+
+	emc_writel(emc, value, EMC_CFG_DIG_DLL);
+	tegra210_emc_timing_update(emc);
+
+	for (i = 0; i < emc->num_channels; i++)
+		tegra210_emc_wait_for_update(emc, i, EMC_CFG_DIG_DLL,
+					     EMC_CFG_DIG_DLL_CFG_DLL_EN,
+					     state);
+}
+
+void tegra210_emc_dll_disable(struct tegra210_emc *emc)
+{
+	u32 value;
+
+	value = emc_readl(emc, EMC_CFG_DIG_DLL);
+	value &= ~EMC_CFG_DIG_DLL_CFG_DLL_EN;
+
+	update_dll_control(emc, value, false);
+}
+
+void tegra210_emc_dll_enable(struct tegra210_emc *emc)
+{
+	u32 value;
+
+	value = emc_readl(emc, EMC_CFG_DIG_DLL);
+	value |= EMC_CFG_DIG_DLL_CFG_DLL_EN;
+
+	update_dll_control(emc, value, true);
+}
+
+void tegra210_emc_adjust_timing(struct tegra210_emc *emc,
+				struct tegra210_emc_timing *timing)
+{
+	u32 dsr_cntrl = timing->burst_regs[EMC_DYN_SELF_REF_CONTROL_INDEX];
+	u32 pre_ref = timing->burst_regs[EMC_PRE_REFRESH_REQ_CNT_INDEX];
+	u32 ref = timing->burst_regs[EMC_REFRESH_INDEX];
+
+	switch (emc->refresh) {
+	case TEGRA210_EMC_REFRESH_NOMINAL:
+	case TEGRA210_EMC_REFRESH_THROTTLE:
+		break;
+
+	case TEGRA210_EMC_REFRESH_2X:
+		ref = REFRESH_SPEEDUP(ref, 2);
+		pre_ref = REFRESH_SPEEDUP(pre_ref, 2);
+		dsr_cntrl = REFRESH_SPEEDUP(dsr_cntrl, 2);
+		break;
+
+	case TEGRA210_EMC_REFRESH_4X:
+		ref = REFRESH_SPEEDUP(ref, 4);
+		pre_ref = REFRESH_SPEEDUP(pre_ref, 4);
+		dsr_cntrl = REFRESH_SPEEDUP(dsr_cntrl, 4);
+		break;
+
+	default:
+		dev_warn(emc->dev, "failed to set refresh: %d\n", emc->refresh);
+		return;
+	}
+
+	emc_writel(emc, ref, emc->offsets->burst[EMC_REFRESH_INDEX]);
+	emc_writel(emc, pre_ref,
+		   emc->offsets->burst[EMC_PRE_REFRESH_REQ_CNT_INDEX]);
+	emc_writel(emc, dsr_cntrl,
+		   emc->offsets->burst[EMC_DYN_SELF_REF_CONTROL_INDEX]);
+}
+
+static int tegra210_emc_set_rate(struct device *dev,
+				 const struct tegra210_clk_emc_config *config)
+{
+	struct tegra210_emc *emc = dev_get_drvdata(dev);
+	struct tegra210_emc_timing *timing = NULL;
+	unsigned long rate = config->rate;
+	s64 last_change_delay;
+	unsigned long flags;
+	unsigned int i;
+
+	if (rate == emc->last->rate * 1000UL)
+		return 0;
+
+	for (i = 0; i < emc->num_timings; i++) {
+		if (emc->timings[i].rate * 1000UL == rate) {
+			timing = &emc->timings[i];
+			break;
+		}
+	}
+
+	if (!timing)
+		return -EINVAL;
+
+	if (rate > 204000000 && !timing->trained)
+		return -EINVAL;
+
+	emc->next = timing;
+	last_change_delay = ktime_us_delta(ktime_get(), emc->clkchange_time);
+
+	/* XXX use non-busy-looping sleep? */
+	if ((last_change_delay >= 0) &&
+	    (last_change_delay < emc->clkchange_delay))
+		udelay(emc->clkchange_delay - (int)last_change_delay);
+
+	spin_lock_irqsave(&emc->lock, flags);
+	tegra210_emc_set_clock(emc, config->value);
+	emc->clkchange_time = ktime_get();
+	emc->last = timing;
+	spin_unlock_irqrestore(&emc->lock, flags);
+
+	return 0;
+}
+
+/*
+ * debugfs interface
+ *
+ * The memory controller driver exposes some files in debugfs that can be used
+ * to control the EMC frequency. The top-level directory can be found here:
+ *
+ *   /sys/kernel/debug/emc
+ *
+ * It contains the following files:
+ *
+ *   - available_rates: This file contains a list of valid, space-separated
+ *     EMC frequencies.
+ *
+ *   - min_rate: Writing a value to this file sets the given frequency as the
+ *       floor of the permitted range. If this is higher than the currently
+ *       configured EMC frequency, this will cause the frequency to be
+ *       increased so that it stays within the valid range.
+ *
+ *   - max_rate: Similarily to the min_rate file, writing a value to this file
+ *       sets the given frequency as the ceiling of the permitted range. If
+ *       the value is lower than the currently configured EMC frequency, this
+ *       will cause the frequency to be decreased so that it stays within the
+ *       valid range.
+ */
+
+static bool tegra210_emc_validate_rate(struct tegra210_emc *emc,
+				       unsigned long rate)
+{
+	unsigned int i;
+
+	for (i = 0; i < emc->num_timings; i++)
+		if (rate == emc->timings[i].rate * 1000UL)
+			return true;
+
+	return false;
+}
+
+static int tegra210_emc_debug_available_rates_show(struct seq_file *s,
+						   void *data)
+{
+	struct tegra210_emc *emc = s->private;
+	const char *prefix = "";
+	unsigned int i;
+
+	for (i = 0; i < emc->num_timings; i++) {
+		seq_printf(s, "%s%u", prefix, emc->timings[i].rate * 1000);
+		prefix = " ";
+	}
+
+	seq_puts(s, "\n");
+
+	return 0;
+}
+
+static int tegra210_emc_debug_available_rates_open(struct inode *inode,
+						   struct file *file)
+{
+	return single_open(file, tegra210_emc_debug_available_rates_show,
+			   inode->i_private);
+}
+
+static const struct file_operations tegra210_emc_debug_available_rates_fops = {
+	.open = tegra210_emc_debug_available_rates_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static int tegra210_emc_debug_min_rate_get(void *data, u64 *rate)
+{
+	struct tegra210_emc *emc = data;
+
+	*rate = emc->debugfs.min_rate;
+
+	return 0;
+}
+
+static int tegra210_emc_debug_min_rate_set(void *data, u64 rate)
+{
+	struct tegra210_emc *emc = data;
+	int err;
+
+	if (!tegra210_emc_validate_rate(emc, rate))
+		return -EINVAL;
+
+	err = clk_set_min_rate(emc->clk, rate);
+	if (err < 0)
+		return err;
+
+	emc->debugfs.min_rate = rate;
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(tegra210_emc_debug_min_rate_fops,
+			tegra210_emc_debug_min_rate_get,
+			tegra210_emc_debug_min_rate_set, "%llu\n");
+
+static int tegra210_emc_debug_max_rate_get(void *data, u64 *rate)
+{
+	struct tegra210_emc *emc = data;
+
+	*rate = emc->debugfs.max_rate;
+
+	return 0;
+}
+
+static int tegra210_emc_debug_max_rate_set(void *data, u64 rate)
+{
+	struct tegra210_emc *emc = data;
+	int err;
+
+	if (!tegra210_emc_validate_rate(emc, rate))
+		return -EINVAL;
+
+	err = clk_set_max_rate(emc->clk, rate);
+	if (err < 0)
+		return err;
+
+	emc->debugfs.max_rate = rate;
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(tegra210_emc_debug_max_rate_fops,
+			tegra210_emc_debug_max_rate_get,
+			tegra210_emc_debug_max_rate_set, "%llu\n");
+
+static int tegra210_emc_debug_temperature_get(void *data, u64 *temperature)
+{
+	struct tegra210_emc *emc = data;
+	unsigned int value;
+
+	if (!emc->debugfs.temperature)
+		value = tegra210_emc_get_temperature(emc);
+	else
+		value = emc->debugfs.temperature;
+
+	*temperature = value;
+
+	return 0;
+}
+
+static int tegra210_emc_debug_temperature_set(void *data, u64 temperature)
+{
+	struct tegra210_emc *emc = data;
+
+	if (temperature > 7)
+		return -EINVAL;
+
+	emc->debugfs.temperature = temperature;
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(tegra210_emc_debug_temperature_fops,
+			tegra210_emc_debug_temperature_get,
+			tegra210_emc_debug_temperature_set, "%llu\n");
+
+static void tegra210_emc_debugfs_init(struct tegra210_emc *emc)
+{
+	struct device *dev = emc->dev;
+	unsigned int i;
+	int err;
+
+	emc->debugfs.min_rate = ULONG_MAX;
+	emc->debugfs.max_rate = 0;
+
+	for (i = 0; i < emc->num_timings; i++) {
+		if (emc->timings[i].rate * 1000UL < emc->debugfs.min_rate)
+			emc->debugfs.min_rate = emc->timings[i].rate * 1000UL;
+
+		if (emc->timings[i].rate * 1000UL > emc->debugfs.max_rate)
+			emc->debugfs.max_rate = emc->timings[i].rate * 1000UL;
+	}
+
+	if (!emc->num_timings) {
+		emc->debugfs.min_rate = clk_get_rate(emc->clk);
+		emc->debugfs.max_rate = emc->debugfs.min_rate;
+	}
+
+	err = clk_set_rate_range(emc->clk, emc->debugfs.min_rate,
+				 emc->debugfs.max_rate);
+	if (err < 0) {
+		dev_err(dev, "failed to set rate range [%lu-%lu] for %pC\n",
+			emc->debugfs.min_rate, emc->debugfs.max_rate,
+			emc->clk);
+		return;
+	}
+
+	emc->debugfs.root = debugfs_create_dir("emc", NULL);
+	if (!emc->debugfs.root) {
+		dev_err(dev, "failed to create debugfs directory\n");
+		return;
+	}
+
+	debugfs_create_file("available_rates", 0444, emc->debugfs.root, emc,
+			    &tegra210_emc_debug_available_rates_fops);
+	debugfs_create_file("min_rate", 0644, emc->debugfs.root, emc,
+			    &tegra210_emc_debug_min_rate_fops);
+	debugfs_create_file("max_rate", 0644, emc->debugfs.root, emc,
+			    &tegra210_emc_debug_max_rate_fops);
+	debugfs_create_file("temperature", 0644, emc->debugfs.root, emc,
+			    &tegra210_emc_debug_temperature_fops);
+}
+
+static void tegra210_emc_detect(struct tegra210_emc *emc)
+{
+	u32 value;
+
+	/* probe the number of connected DRAM devices */
+	value = mc_readl(emc->mc, MC_EMEM_ADR_CFG);
+
+	if (value & MC_EMEM_ADR_CFG_EMEM_NUMDEV)
+		emc->num_devices = 2;
+	else
+		emc->num_devices = 1;
+
+	/* probe the type of DRAM */
+	value = emc_readl(emc, EMC_FBIO_CFG5);
+	emc->dram_type = value & 0x3;
+
+	/* probe the number of channels */
+	value = emc_readl(emc, EMC_FBIO_CFG7);
+
+	if ((value & EMC_FBIO_CFG7_CH1_ENABLE) &&
+	    (value & EMC_FBIO_CFG7_CH0_ENABLE))
+		emc->num_channels = 2;
+	else
+		emc->num_channels = 1;
+}
+
+static int tegra210_emc_validate_timings(struct tegra210_emc *emc,
+					 struct tegra210_emc_timing *timings,
+					 unsigned int num_timings)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_timings; i++) {
+		u32 min_volt = timings[i].min_volt;
+		u32 rate = timings[i].rate;
+
+		if (!rate)
+			return -EINVAL;
+
+		if ((i > 0) && ((rate <= timings[i - 1].rate) ||
+		    (min_volt < timings[i - 1].min_volt)))
+			return -EINVAL;
+
+		if (timings[i].revision != timings[0].revision)
+			continue;
+	}
+
+	return 0;
+}
+
+static int tegra210_emc_probe(struct platform_device *pdev)
+{
+	struct thermal_cooling_device *cd;
+	unsigned long current_rate;
+	struct platform_device *mc;
+	struct tegra210_emc *emc;
+	struct device_node *np;
+	unsigned int i;
+	int err;
+
+	emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL);
+	if (!emc)
+		return -ENOMEM;
+
+	emc->clk = devm_clk_get(&pdev->dev, "emc");
+	if (IS_ERR(emc->clk))
+		return PTR_ERR(emc->clk);
+
+	platform_set_drvdata(pdev, emc);
+	spin_lock_init(&emc->lock);
+	emc->dev = &pdev->dev;
+
+	np = of_parse_phandle(pdev->dev.of_node, "nvidia,memory-controller", 0);
+	if (!np) {
+		dev_err(&pdev->dev, "could not get memory controller\n");
+		return -ENOENT;
+	}
+
+	mc = of_find_device_by_node(np);
+	of_node_put(np);
+	if (!mc)
+		return -ENOENT;
+
+	emc->mc = platform_get_drvdata(mc);
+	if (!emc->mc) {
+		put_device(&mc->dev);
+		return -EPROBE_DEFER;
+	}
+
+	emc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(emc->regs)) {
+		err = PTR_ERR(emc->regs);
+		goto put_mc;
+	}
+
+	for (i = 0; i < 2; i++) {
+		emc->channel[i] = devm_platform_ioremap_resource(pdev, 1 + i);
+		if (IS_ERR(emc->channel[i])) {
+			err = PTR_ERR(emc->channel[i]);
+			goto put_mc;
+		}
+	}
+
+	tegra210_emc_detect(emc);
+	np = pdev->dev.of_node;
+
+	/* attach to the nominal and (optional) derated tables */
+	err = of_reserved_mem_device_init_by_name(emc->dev, np, "nominal");
+	if (err < 0) {
+		dev_err(emc->dev, "failed to get nominal EMC table: %d\n", err);
+		goto put_mc;
+	}
+
+	err = of_reserved_mem_device_init_by_name(emc->dev, np, "derated");
+	if (err < 0 && err != -ENODEV) {
+		dev_err(emc->dev, "failed to get derated EMC table: %d\n", err);
+		goto release;
+	}
+
+	/* validate the tables */
+	if (emc->nominal) {
+		err = tegra210_emc_validate_timings(emc, emc->nominal,
+						    emc->num_timings);
+		if (err < 0)
+			goto release;
+	}
+
+	if (emc->derated) {
+		err = tegra210_emc_validate_timings(emc, emc->derated,
+						    emc->num_timings);
+		if (err < 0)
+			goto release;
+	}
+
+	/* default to the nominal table */
+	emc->timings = emc->nominal;
+
+	/* pick the current timing based on the current EMC clock rate */
+	current_rate = clk_get_rate(emc->clk) / 1000;
+
+	for (i = 0; i < emc->num_timings; i++) {
+		if (emc->timings[i].rate == current_rate) {
+			emc->last = &emc->timings[i];
+			break;
+		}
+	}
+
+	if (i == emc->num_timings) {
+		dev_err(emc->dev, "no EMC table entry found for %lu kHz\n",
+			current_rate);
+		err = -ENOENT;
+		goto release;
+	}
+
+	/* pick a compatible clock change sequence for the EMC table */
+	for (i = 0; i < ARRAY_SIZE(tegra210_emc_sequences); i++) {
+		const struct tegra210_emc_sequence *sequence =
+				tegra210_emc_sequences[i];
+
+		if (emc->timings[0].revision == sequence->revision) {
+			emc->sequence = sequence;
+			break;
+		}
+	}
+
+	if (!emc->sequence) {
+		dev_err(&pdev->dev, "sequence %u not supported\n",
+			emc->timings[0].revision);
+		err = -ENOTSUPP;
+		goto release;
+	}
+
+	emc->offsets = &tegra210_emc_table_register_offsets;
+	emc->refresh = TEGRA210_EMC_REFRESH_NOMINAL;
+
+	emc->provider.owner = THIS_MODULE;
+	emc->provider.dev = &pdev->dev;
+	emc->provider.set_rate = tegra210_emc_set_rate;
+
+	emc->provider.configs = devm_kcalloc(&pdev->dev, emc->num_timings,
+					     sizeof(*emc->provider.configs),
+					     GFP_KERNEL);
+	if (!emc->provider.configs) {
+		err = -ENOMEM;
+		goto release;
+	}
+
+	emc->provider.num_configs = emc->num_timings;
+
+	for (i = 0; i < emc->provider.num_configs; i++) {
+		struct tegra210_emc_timing *timing = &emc->timings[i];
+		struct tegra210_clk_emc_config *config =
+				&emc->provider.configs[i];
+		u32 value;
+
+		config->rate = timing->rate * 1000UL;
+		config->value = timing->clk_src_emc;
+
+		value = timing->burst_mc_regs[MC_EMEM_ARB_MISC0_INDEX];
+
+		if ((value & MC_EMEM_ARB_MISC0_EMC_SAME_FREQ) == 0)
+			config->same_freq = false;
+		else
+			config->same_freq = true;
+	}
+
+	err = tegra210_clk_emc_attach(emc->clk, &emc->provider);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to attach to EMC clock: %d\n", err);
+		goto release;
+	}
+
+	emc->clkchange_delay = 100;
+	emc->training_interval = 100;
+	dev_set_drvdata(emc->dev, emc);
+
+	timer_setup(&emc->refresh_timer, tegra210_emc_poll_refresh,
+		    TIMER_DEFERRABLE);
+	atomic_set(&emc->refresh_poll, 0);
+	emc->refresh_poll_interval = 1000;
+
+	timer_setup(&emc->training, tegra210_emc_train, 0);
+
+	tegra210_emc_debugfs_init(emc);
+
+	cd = devm_thermal_of_cooling_device_register(emc->dev, np, "emc", emc,
+						     &tegra210_emc_cd_ops);
+	if (IS_ERR(cd)) {
+		err = PTR_ERR(cd);
+		dev_err(emc->dev, "failed to register cooling device: %d\n",
+			err);
+		goto detach;
+	}
+
+	return 0;
+
+detach:
+	debugfs_remove_recursive(emc->debugfs.root);
+	tegra210_clk_emc_detach(emc->clk);
+release:
+	of_reserved_mem_device_release(emc->dev);
+put_mc:
+	put_device(emc->mc->dev);
+	return err;
+}
+
+static int tegra210_emc_remove(struct platform_device *pdev)
+{
+	struct tegra210_emc *emc = platform_get_drvdata(pdev);
+
+	debugfs_remove_recursive(emc->debugfs.root);
+	tegra210_clk_emc_detach(emc->clk);
+	of_reserved_mem_device_release(emc->dev);
+	put_device(emc->mc->dev);
+
+	return 0;
+}
+
+static int __maybe_unused tegra210_emc_suspend(struct device *dev)
+{
+	struct tegra210_emc *emc = dev_get_drvdata(dev);
+	int err;
+
+	err = clk_rate_exclusive_get(emc->clk);
+	if (err < 0) {
+		dev_err(emc->dev, "failed to acquire clock: %d\n", err);
+		return err;
+	}
+
+	emc->resume_rate = clk_get_rate(emc->clk);
+
+	clk_set_rate(emc->clk, 204000000);
+	tegra210_clk_emc_detach(emc->clk);
+
+	dev_dbg(dev, "suspending at %lu Hz\n", clk_get_rate(emc->clk));
+
+	return 0;
+}
+
+static int __maybe_unused tegra210_emc_resume(struct device *dev)
+{
+	struct tegra210_emc *emc = dev_get_drvdata(dev);
+	int err;
+
+	err = tegra210_clk_emc_attach(emc->clk, &emc->provider);
+	if (err < 0) {
+		dev_err(dev, "failed to attach to EMC clock: %d\n", err);
+		return err;
+	}
+
+	clk_set_rate(emc->clk, emc->resume_rate);
+	clk_rate_exclusive_put(emc->clk);
+
+	dev_dbg(dev, "resuming at %lu Hz\n", clk_get_rate(emc->clk));
+
+	return 0;
+}
+
+static const struct dev_pm_ops tegra210_emc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(tegra210_emc_suspend, tegra210_emc_resume)
+};
+
+static const struct of_device_id tegra210_emc_of_match[] = {
+	{ .compatible = "nvidia,tegra210-emc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra210_emc_of_match);
+
+static struct platform_driver tegra210_emc_driver = {
+	.driver = {
+		.name = "tegra210-emc",
+		.of_match_table = tegra210_emc_of_match,
+		.pm = &tegra210_emc_pm_ops,
+	},
+	.probe = tegra210_emc_probe,
+	.remove = tegra210_emc_remove,
+};
+
+module_platform_driver(tegra210_emc_driver);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_AUTHOR("Joseph Lo <josephl@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra210 EMC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/memory/tegra/tegra210-emc-table.c b/drivers/memory/tegra/tegra210-emc-table.c
new file mode 100644
index 000000000000..3e0598363b87
--- /dev/null
+++ b/drivers/memory/tegra/tegra210-emc-table.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/of_reserved_mem.h>
+
+#include "tegra210-emc.h"
+
+#define TEGRA_EMC_MAX_FREQS		16
+
+static int tegra210_emc_table_device_init(struct reserved_mem *rmem,
+					  struct device *dev)
+{
+	struct tegra210_emc *emc = dev_get_drvdata(dev);
+	struct tegra210_emc_timing *timings;
+	unsigned int i, count = 0;
+
+	timings = memremap(rmem->base, rmem->size, MEMREMAP_WB);
+	if (!timings) {
+		dev_err(dev, "failed to map EMC table\n");
+		return -ENOMEM;
+	}
+
+	count = 0;
+
+	for (i = 0; i < TEGRA_EMC_MAX_FREQS; i++) {
+		if (timings[i].revision == 0)
+			break;
+
+		count++;
+	}
+
+	/* only the nominal and derated tables are expected */
+	if (emc->derated) {
+		dev_warn(dev, "excess EMC table '%s'\n", rmem->name);
+		goto out;
+	}
+
+	if (emc->nominal) {
+		if (count != emc->num_timings) {
+			dev_warn(dev, "%u derated vs. %u nominal entries\n",
+				 count, emc->num_timings);
+			memunmap(timings);
+			return -EINVAL;
+		}
+
+		emc->derated = timings;
+	} else {
+		emc->num_timings = count;
+		emc->nominal = timings;
+	}
+
+out:
+	/* keep track of which table this is */
+	rmem->priv = timings;
+
+	return 0;
+}
+
+static void tegra210_emc_table_device_release(struct reserved_mem *rmem,
+					      struct device *dev)
+{
+	struct tegra210_emc_timing *timings = rmem->priv;
+	struct tegra210_emc *emc = dev_get_drvdata(dev);
+
+	if ((emc->nominal && timings != emc->nominal) &&
+	    (emc->derated && timings != emc->derated))
+		dev_warn(dev, "trying to release unassigned EMC table '%s'\n",
+			 rmem->name);
+
+	memunmap(timings);
+}
+
+static const struct reserved_mem_ops tegra210_emc_table_ops = {
+	.device_init = tegra210_emc_table_device_init,
+	.device_release = tegra210_emc_table_device_release,
+};
+
+static int tegra210_emc_table_init(struct reserved_mem *rmem)
+{
+	pr_debug("Tegra210 EMC table at %pa, size %lu bytes\n", &rmem->base,
+		 (unsigned long)rmem->size);
+
+	rmem->ops = &tegra210_emc_table_ops;
+
+	return 0;
+}
+RESERVEDMEM_OF_DECLARE(tegra210_emc_table, "nvidia,tegra210-emc-table",
+		       tegra210_emc_table_init);
diff --git a/drivers/memory/tegra/tegra210-emc.h b/drivers/memory/tegra/tegra210-emc.h
new file mode 100644
index 000000000000..63b3d0a790f1
--- /dev/null
+++ b/drivers/memory/tegra/tegra210-emc.h
@@ -0,0 +1,1017 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef TEGRA210_EMC_H
+#define TEGRA210_EMC_H
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/tegra.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#define DVFS_FGCG_HIGH_SPEED_THRESHOLD				1000
+#define IOBRICK_DCC_THRESHOLD					2400
+#define DVFS_FGCG_MID_SPEED_THRESHOLD				600
+
+#define EMC_STATUS_UPDATE_TIMEOUT				1000
+
+/* register definitions */
+#define EMC_INTSTATUS						0x0
+#define EMC_INTSTATUS_CLKCHANGE_COMPLETE			BIT(4)
+#define EMC_DBG							0x8
+#define EMC_DBG_WRITE_MUX_ACTIVE				BIT(1)
+#define EMC_DBG_WRITE_ACTIVE_ONLY				BIT(30)
+#define EMC_CFG							0xc
+#define EMC_CFG_DRAM_CLKSTOP_PD					BIT(31)
+#define EMC_CFG_DRAM_CLKSTOP_SR					BIT(30)
+#define EMC_CFG_DRAM_ACPD					BIT(29)
+#define EMC_CFG_DYN_SELF_REF					BIT(28)
+#define EMC_PIN							0x24
+#define EMC_PIN_PIN_CKE						BIT(0)
+#define EMC_PIN_PIN_CKEB					BIT(1)
+#define EMC_PIN_PIN_CKE_PER_DEV					BIT(2)
+#define EMC_TIMING_CONTROL					0x28
+#define EMC_RC							0x2c
+#define EMC_RFC							0x30
+#define EMC_RAS							0x34
+#define EMC_RP							0x38
+#define EMC_R2W							0x3c
+#define EMC_W2R							0x40
+#define EMC_R2P							0x44
+#define EMC_W2P							0x48
+#define EMC_RD_RCD						0x4c
+#define EMC_WR_RCD						0x50
+#define EMC_RRD							0x54
+#define EMC_REXT						0x58
+#define EMC_WDV							0x5c
+#define EMC_QUSE						0x60
+#define EMC_QRST						0x64
+#define EMC_QSAFE						0x68
+#define EMC_RDV							0x6c
+#define EMC_REFRESH						0x70
+#define EMC_BURST_REFRESH_NUM					0x74
+#define EMC_PDEX2WR						0x78
+#define EMC_PDEX2RD						0x7c
+#define EMC_PCHG2PDEN						0x80
+#define EMC_ACT2PDEN						0x84
+#define EMC_AR2PDEN						0x88
+#define EMC_RW2PDEN						0x8c
+#define EMC_TXSR						0x90
+#define EMC_TCKE						0x94
+#define EMC_TFAW						0x98
+#define EMC_TRPAB						0x9c
+#define EMC_TCLKSTABLE						0xa0
+#define EMC_TCLKSTOP						0xa4
+#define EMC_TREFBW						0xa8
+#define EMC_TPPD						0xac
+#define EMC_ODT_WRITE						0xb0
+#define EMC_PDEX2MRR						0xb4
+#define EMC_WEXT						0xb8
+#define EMC_RFC_SLR						0xc0
+#define EMC_MRS_WAIT_CNT2					0xc4
+#define EMC_MRS_WAIT_CNT2_MRS_EXT2_WAIT_CNT_SHIFT		16
+#define EMC_MRS_WAIT_CNT2_MRS_EXT1_WAIT_CNT_SHIFT		0
+#define EMC_MRS_WAIT_CNT					0xc8
+#define EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT			0
+#define EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK			\
+	(0x3FF << EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT)
+
+#define EMC_MRS							0xcc
+#define EMC_EMRS						0xd0
+#define EMC_EMRS_USE_EMRS_LONG_CNT				BIT(26)
+#define EMC_REF							0xd4
+#define  EMC_REF_REF_CMD					BIT(0)
+#define EMC_SELF_REF						0xe0
+#define EMC_MRW							0xe8
+#define EMC_MRW_MRW_OP_SHIFT					0
+#define EMC_MRW_MRW_OP_MASK					\
+	(0xff << EMC_MRW_MRW_OP_SHIFT)
+#define EMC_MRW_MRW_MA_SHIFT					16
+#define EMC_MRW_USE_MRW_EXT_CNT					27
+#define EMC_MRW_MRW_DEV_SELECTN_SHIFT				30
+
+#define EMC_MRR							0xec
+#define EMC_MRR_DEV_SEL_SHIFT					30
+#define EMC_MRR_DEV_SEL_MASK					0x3
+#define EMC_MRR_MA_SHIFT					16
+#define EMC_MRR_MA_MASK						0xff
+#define EMC_MRR_DATA_SHIFT					0
+#define EMC_MRR_DATA_MASK					0xffff
+
+#define EMC_FBIO_SPARE						0x100
+#define EMC_FBIO_CFG5						0x104
+#define EMC_FBIO_CFG5_DRAM_TYPE_SHIFT				0
+#define EMC_FBIO_CFG5_DRAM_TYPE_MASK				\
+	(0x3 << EMC_FBIO_CFG5_DRAM_TYPE_SHIFT)
+#define EMC_FBIO_CFG5_CMD_TX_DIS				BIT(8)
+
+#define EMC_PDEX2CKE						0x118
+#define EMC_CKE2PDEN						0x11c
+#define EMC_MPC							0x128
+#define EMC_EMRS2						0x12c
+#define EMC_EMRS2_USE_EMRS2_LONG_CNT				BIT(26)
+#define EMC_MRW2						0x134
+#define EMC_MRW3						0x138
+#define EMC_MRW4						0x13c
+#define EMC_R2R							0x144
+#define EMC_EINPUT						0x14c
+#define EMC_EINPUT_DURATION					0x150
+#define EMC_PUTERM_EXTRA					0x154
+#define EMC_TCKESR						0x158
+#define EMC_TPD							0x15c
+#define EMC_AUTO_CAL_CONFIG					0x2a4
+#define EMC_AUTO_CAL_CONFIG_AUTO_CAL_COMPUTE_START		BIT(0)
+#define EMC_AUTO_CAL_CONFIG_AUTO_CAL_MEASURE_STALL		BIT(9)
+#define EMC_AUTO_CAL_CONFIG_AUTO_CAL_UPDATE_STALL		BIT(10)
+#define EMC_AUTO_CAL_CONFIG_AUTO_CAL_ENABLE			BIT(29)
+#define EMC_AUTO_CAL_CONFIG_AUTO_CAL_START			BIT(31)
+#define EMC_EMC_STATUS						0x2b4
+#define EMC_EMC_STATUS_MRR_DIVLD				BIT(20)
+#define EMC_EMC_STATUS_TIMING_UPDATE_STALLED			BIT(23)
+#define EMC_EMC_STATUS_DRAM_IN_POWERDOWN_SHIFT			4
+#define EMC_EMC_STATUS_DRAM_IN_POWERDOWN_MASK			\
+	(0x3 << EMC_EMC_STATUS_DRAM_IN_POWERDOWN_SHIFT)
+#define EMC_EMC_STATUS_DRAM_IN_SELF_REFRESH_SHIFT		8
+#define EMC_EMC_STATUS_DRAM_IN_SELF_REFRESH_MASK		\
+	(0x3 << EMC_EMC_STATUS_DRAM_IN_SELF_REFRESH_SHIFT)
+
+#define EMC_CFG_2						0x2b8
+#define EMC_CFG_DIG_DLL						0x2bc
+#define EMC_CFG_DIG_DLL_CFG_DLL_EN				BIT(0)
+#define EMC_CFG_DIG_DLL_CFG_DLL_STALL_ALL_UNTIL_LOCK		BIT(1)
+#define EMC_CFG_DIG_DLL_CFG_DLL_STALL_ALL_TRAFFIC		BIT(3)
+#define EMC_CFG_DIG_DLL_CFG_DLL_STALL_RW_UNTIL_LOCK		BIT(4)
+#define EMC_CFG_DIG_DLL_CFG_DLL_MODE_SHIFT			6
+#define EMC_CFG_DIG_DLL_CFG_DLL_MODE_MASK			\
+	(0x3 << EMC_CFG_DIG_DLL_CFG_DLL_MODE_SHIFT)
+#define EMC_CFG_DIG_DLL_CFG_DLL_LOCK_LIMIT_SHIFT		8
+#define EMC_CFG_DIG_DLL_CFG_DLL_LOCK_LIMIT_MASK			\
+	(0x7 << EMC_CFG_DIG_DLL_CFG_DLL_LOCK_LIMIT_SHIFT)
+
+#define EMC_CFG_DIG_DLL_PERIOD					0x2c0
+#define EMC_DIG_DLL_STATUS					0x2c4
+#define EMC_DIG_DLL_STATUS_DLL_LOCK				BIT(15)
+#define EMC_DIG_DLL_STATUS_DLL_PRIV_UPDATED			BIT(17)
+#define EMC_DIG_DLL_STATUS_DLL_OUT_SHIFT			0
+#define EMC_DIG_DLL_STATUS_DLL_OUT_MASK				\
+	(0x7ff << EMC_DIG_DLL_STATUS_DLL_OUT_SHIFT)
+
+#define EMC_CFG_DIG_DLL_1					0x2c8
+#define EMC_RDV_MASK						0x2cc
+#define EMC_WDV_MASK						0x2d0
+#define EMC_RDV_EARLY_MASK					0x2d4
+#define EMC_RDV_EARLY						0x2d8
+#define EMC_AUTO_CAL_CONFIG8					0x2dc
+#define EMC_ZCAL_INTERVAL					0x2e0
+#define EMC_ZCAL_WAIT_CNT					0x2e4
+#define EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_MASK			0x7ff
+#define EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_SHIFT			0
+
+#define EMC_ZQ_CAL						0x2ec
+#define EMC_ZQ_CAL_DEV_SEL_SHIFT				30
+#define EMC_ZQ_CAL_LONG						BIT(4)
+#define EMC_ZQ_CAL_ZQ_LATCH_CMD					BIT(1)
+#define EMC_ZQ_CAL_ZQ_CAL_CMD					BIT(0)
+#define EMC_FDPD_CTRL_DQ					0x310
+#define EMC_FDPD_CTRL_CMD					0x314
+#define EMC_PMACRO_CMD_BRICK_CTRL_FDPD				0x318
+#define EMC_PMACRO_DATA_BRICK_CTRL_FDPD				0x31c
+#define EMC_PMACRO_BRICK_CTRL_RFU1				0x330
+#define EMC_PMACRO_BRICK_CTRL_RFU2				0x334
+#define EMC_TR_TIMING_0						0x3b4
+#define EMC_TR_CTRL_1						0x3bc
+#define EMC_TR_RDV						0x3c4
+#define EMC_STALL_THEN_EXE_AFTER_CLKCHANGE			0x3cc
+#define EMC_SEL_DPD_CTRL					0x3d8
+#define EMC_SEL_DPD_CTRL_DATA_SEL_DPD_EN			BIT(8)
+#define EMC_SEL_DPD_CTRL_ODT_SEL_DPD_EN				BIT(5)
+#define EMC_SEL_DPD_CTRL_RESET_SEL_DPD_EN			BIT(4)
+#define EMC_SEL_DPD_CTRL_CA_SEL_DPD_EN				BIT(3)
+#define EMC_SEL_DPD_CTRL_CLK_SEL_DPD_EN				BIT(2)
+#define EMC_PRE_REFRESH_REQ_CNT					0x3dc
+#define EMC_DYN_SELF_REF_CONTROL				0x3e0
+#define EMC_TXSRDLL						0x3e4
+#define EMC_CCFIFO_ADDR						0x3e8
+#define  EMC_CCFIFO_ADDR_STALL_BY_1 (1 << 31)
+#define  EMC_CCFIFO_ADDR_STALL(x) (((x) & 0x7fff) << 16)
+#define  EMC_CCFIFO_ADDR_OFFSET(x) ((x) & 0xffff)
+#define EMC_CCFIFO_DATA						0x3ec
+#define EMC_TR_QPOP						0x3f4
+#define EMC_TR_RDV_MASK						0x3f8
+#define EMC_TR_QSAFE						0x3fc
+#define EMC_TR_QRST						0x400
+#define EMC_ISSUE_QRST						0x428
+#define EMC_AUTO_CAL_CONFIG2					0x458
+#define EMC_AUTO_CAL_CONFIG3					0x45c
+#define EMC_TR_DVFS						0x460
+#define EMC_AUTO_CAL_CHANNEL					0x464
+#define EMC_IBDLY						0x468
+#define EMC_OBDLY						0x46c
+#define EMC_TXDSRVTTGEN						0x480
+#define EMC_WE_DURATION						0x48c
+#define EMC_WS_DURATION						0x490
+#define EMC_WEV							0x494
+#define EMC_WSV							0x498
+#define EMC_CFG_3						0x49c
+#define EMC_MRW6						0x4a4
+#define EMC_MRW7						0x4a8
+#define EMC_MRW8						0x4ac
+#define EMC_MRW9						0x4b0
+#define EMC_MRW10						0x4b4
+#define EMC_MRW11						0x4b8
+#define EMC_MRW12						0x4bc
+#define EMC_MRW13						0x4c0
+#define EMC_MRW14						0x4c4
+#define EMC_MRW15						0x4d0
+#define EMC_CFG_SYNC						0x4d4
+#define EMC_FDPD_CTRL_CMD_NO_RAMP				0x4d8
+#define EMC_FDPD_CTRL_CMD_NO_RAMP_CMD_DPD_NO_RAMP_ENABLE	BIT(0)
+#define EMC_WDV_CHK						0x4e0
+#define EMC_CFG_PIPE_2						0x554
+#define EMC_CFG_PIPE_CLK					0x558
+#define EMC_CFG_PIPE_CLK_CLK_ALWAYS_ON				BIT(0)
+#define EMC_CFG_PIPE_1						0x55c
+#define EMC_CFG_PIPE						0x560
+#define EMC_QPOP						0x564
+#define EMC_QUSE_WIDTH						0x568
+#define EMC_PUTERM_WIDTH					0x56c
+#define EMC_AUTO_CAL_CONFIG7					0x574
+#define EMC_REFCTRL2						0x580
+#define EMC_FBIO_CFG7						0x584
+#define EMC_FBIO_CFG7_CH0_ENABLE				BIT(1)
+#define EMC_FBIO_CFG7_CH1_ENABLE				BIT(2)
+#define EMC_DATA_BRLSHFT_0					0x588
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE7_DATA_BRLSHFT_SHIFT	21
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE7_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_0_RANK0_BYTE7_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE6_DATA_BRLSHFT_SHIFT	18
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE6_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_0_RANK0_BYTE6_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE5_DATA_BRLSHFT_SHIFT	15
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE5_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_0_RANK0_BYTE5_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE4_DATA_BRLSHFT_SHIFT	12
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE4_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_0_RANK0_BYTE4_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE3_DATA_BRLSHFT_SHIFT	9
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE3_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_0_RANK0_BYTE3_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE2_DATA_BRLSHFT_SHIFT	6
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE2_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_0_RANK0_BYTE2_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE1_DATA_BRLSHFT_SHIFT	3
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE1_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_0_RANK0_BYTE1_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE0_DATA_BRLSHFT_SHIFT	0
+#define EMC_DATA_BRLSHFT_0_RANK0_BYTE0_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_0_RANK0_BYTE0_DATA_BRLSHFT_SHIFT)
+
+#define EMC_DATA_BRLSHFT_1					0x58c
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE7_DATA_BRLSHFT_SHIFT	21
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE7_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_1_RANK1_BYTE7_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE6_DATA_BRLSHFT_SHIFT	18
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE6_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_1_RANK1_BYTE6_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE5_DATA_BRLSHFT_SHIFT	15
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE5_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_1_RANK1_BYTE5_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE4_DATA_BRLSHFT_SHIFT	12
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE4_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_1_RANK1_BYTE4_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE3_DATA_BRLSHFT_SHIFT	9
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE3_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_1_RANK1_BYTE3_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE2_DATA_BRLSHFT_SHIFT	6
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE2_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_1_RANK1_BYTE2_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE1_DATA_BRLSHFT_SHIFT	3
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE1_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_1_RANK1_BYTE1_DATA_BRLSHFT_SHIFT)
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE0_DATA_BRLSHFT_SHIFT	0
+#define EMC_DATA_BRLSHFT_1_RANK1_BYTE0_DATA_BRLSHFT_MASK	\
+	(0x7 << EMC_DATA_BRLSHFT_1_RANK1_BYTE0_DATA_BRLSHFT_SHIFT)
+
+#define EMC_RFCPB						0x590
+#define EMC_DQS_BRLSHFT_0					0x594
+#define EMC_DQS_BRLSHFT_1					0x598
+#define EMC_CMD_BRLSHFT_0					0x59c
+#define EMC_CMD_BRLSHFT_1					0x5a0
+#define EMC_CMD_BRLSHFT_2					0x5a4
+#define EMC_CMD_BRLSHFT_3					0x5a8
+#define EMC_QUSE_BRLSHFT_0					0x5ac
+#define EMC_AUTO_CAL_CONFIG4					0x5b0
+#define EMC_AUTO_CAL_CONFIG5					0x5b4
+#define EMC_QUSE_BRLSHFT_1					0x5b8
+#define EMC_QUSE_BRLSHFT_2					0x5bc
+#define EMC_CCDMW						0x5c0
+#define EMC_QUSE_BRLSHFT_3					0x5c4
+#define EMC_AUTO_CAL_CONFIG6					0x5cc
+#define EMC_DLL_CFG_0						0x5e4
+#define EMC_DLL_CFG_1						0x5e8
+#define EMC_DLL_CFG_1_DDLLCAL_CTRL_START_TRIM_SHIFT		10
+#define EMC_DLL_CFG_1_DDLLCAL_CTRL_START_TRIM_MASK		\
+	(0x7ff << EMC_DLL_CFG_1_DDLLCAL_CTRL_START_TRIM_SHIFT)
+
+#define EMC_CONFIG_SAMPLE_DELAY					0x5f0
+#define EMC_CFG_UPDATE						0x5f4
+#define EMC_CFG_UPDATE_UPDATE_DLL_IN_UPDATE_SHIFT		9
+#define EMC_CFG_UPDATE_UPDATE_DLL_IN_UPDATE_MASK		\
+	(0x3 << EMC_CFG_UPDATE_UPDATE_DLL_IN_UPDATE_SHIFT)
+
+#define EMC_PMACRO_QUSE_DDLL_RANK0_0				0x600
+#define EMC_PMACRO_QUSE_DDLL_RANK0_1				0x604
+#define EMC_PMACRO_QUSE_DDLL_RANK0_2				0x608
+#define EMC_PMACRO_QUSE_DDLL_RANK0_3				0x60c
+#define EMC_PMACRO_QUSE_DDLL_RANK0_4				0x610
+#define EMC_PMACRO_QUSE_DDLL_RANK0_5				0x614
+#define EMC_PMACRO_QUSE_DDLL_RANK1_0				0x620
+#define EMC_PMACRO_QUSE_DDLL_RANK1_1				0x624
+#define EMC_PMACRO_QUSE_DDLL_RANK1_2				0x628
+#define EMC_PMACRO_QUSE_DDLL_RANK1_3				0x62c
+#define EMC_PMACRO_QUSE_DDLL_RANK1_4				0x630
+#define EMC_PMACRO_QUSE_DDLL_RANK1_5				0x634
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0			0x640
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0_OB_DDLL_LONG_DQ_RANK0_BYTE1_SHIFT \
+	16
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0_OB_DDLL_LONG_DQ_RANK0_BYTE1_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0_OB_DDLL_LONG_DQ_RANK0_BYTE1_SHIFT)
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0_OB_DDLL_LONG_DQ_RANK0_BYTE0_SHIFT \
+	0
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0_OB_DDLL_LONG_DQ_RANK0_BYTE0_MASK \
+	(0x3ff <<							    \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0_OB_DDLL_LONG_DQ_RANK0_BYTE0_SHIFT)
+
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1			0x644
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1_OB_DDLL_LONG_DQ_RANK0_BYTE3_SHIFT \
+	16
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1_OB_DDLL_LONG_DQ_RANK0_BYTE3_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1_OB_DDLL_LONG_DQ_RANK0_BYTE3_SHIFT)
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1_OB_DDLL_LONG_DQ_RANK0_BYTE2_SHIFT \
+	0
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1_OB_DDLL_LONG_DQ_RANK0_BYTE2_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1_OB_DDLL_LONG_DQ_RANK0_BYTE2_SHIFT)
+
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2			0x648
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2_OB_DDLL_LONG_DQ_RANK0_BYTE5_SHIFT  \
+	16
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2_OB_DDLL_LONG_DQ_RANK0_BYTE5_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2_OB_DDLL_LONG_DQ_RANK0_BYTE5_SHIFT)
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2_OB_DDLL_LONG_DQ_RANK0_BYTE4_SHIFT \
+	0
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2_OB_DDLL_LONG_DQ_RANK0_BYTE4_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2_OB_DDLL_LONG_DQ_RANK0_BYTE4_SHIFT)
+
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3			0x64c
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3_OB_DDLL_LONG_DQ_RANK0_BYTE7_SHIFT \
+	16
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3_OB_DDLL_LONG_DQ_RANK0_BYTE7_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3_OB_DDLL_LONG_DQ_RANK0_BYTE7_SHIFT)
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3_OB_DDLL_LONG_DQ_RANK0_BYTE6_SHIFT \
+	0
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3_OB_DDLL_LONG_DQ_RANK0_BYTE6_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3_OB_DDLL_LONG_DQ_RANK0_BYTE6_SHIFT)
+
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_4			0x650
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_5			0x654
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0			0x660
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0_OB_DDLL_LONG_DQ_RANK1_BYTE1_SHIFT \
+	16
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0_OB_DDLL_LONG_DQ_RANK1_BYTE1_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0_OB_DDLL_LONG_DQ_RANK1_BYTE1_SHIFT)
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0_OB_DDLL_LONG_DQ_RANK1_BYTE0_SHIFT \
+	0
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0_OB_DDLL_LONG_DQ_RANK1_BYTE0_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0_OB_DDLL_LONG_DQ_RANK1_BYTE0_SHIFT)
+
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1			0x664
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1_OB_DDLL_LONG_DQ_RANK1_BYTE3_SHIFT \
+	16
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1_OB_DDLL_LONG_DQ_RANK1_BYTE3_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1_OB_DDLL_LONG_DQ_RANK1_BYTE3_SHIFT)
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1_OB_DDLL_LONG_DQ_RANK1_BYTE2_SHIFT \
+	0
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1_OB_DDLL_LONG_DQ_RANK1_BYTE2_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1_OB_DDLL_LONG_DQ_RANK1_BYTE2_SHIFT)
+
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2			0x668
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2_OB_DDLL_LONG_DQ_RANK1_BYTE5_SHIFT \
+	16
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2_OB_DDLL_LONG_DQ_RANK1_BYTE5_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2_OB_DDLL_LONG_DQ_RANK1_BYTE5_SHIFT)
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2_OB_DDLL_LONG_DQ_RANK1_BYTE4_SHIFT \
+	0
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2_OB_DDLL_LONG_DQ_RANK1_BYTE4_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2_OB_DDLL_LONG_DQ_RANK1_BYTE4_SHIFT)
+
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3			0x66c
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3_OB_DDLL_LONG_DQ_RANK1_BYTE7_SHIFT \
+	16
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3_OB_DDLL_LONG_DQ_RANK1_BYTE7_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3_OB_DDLL_LONG_DQ_RANK1_BYTE7_SHIFT)
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3_OB_DDLL_LONG_DQ_RANK1_BYTE6_SHIFT \
+	0
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3_OB_DDLL_LONG_DQ_RANK1_BYTE6_MASK  \
+	(0x3ff <<							     \
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3_OB_DDLL_LONG_DQ_RANK1_BYTE6_SHIFT)
+
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_4			0x670
+#define EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_5			0x674
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_0			0x680
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_1			0x684
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_2			0x688
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_3			0x68c
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_4			0x690
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_5			0x694
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_0			0x6a0
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_1			0x6a4
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_2			0x6a8
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_3			0x6ac
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_4			0x6b0
+#define EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_5			0x6b4
+#define EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_0			0x6c0
+#define EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_1			0x6c4
+#define EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_2			0x6c8
+#define EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_3			0x6cc
+#define EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_0			0x6e0
+#define EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_1			0x6e4
+#define EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_2			0x6e8
+#define EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_3			0x6ec
+#define EMC_PMACRO_TX_PWRD_0					0x720
+#define EMC_PMACRO_TX_PWRD_1					0x724
+#define EMC_PMACRO_TX_PWRD_2					0x728
+#define EMC_PMACRO_TX_PWRD_3					0x72c
+#define EMC_PMACRO_TX_PWRD_4					0x730
+#define EMC_PMACRO_TX_PWRD_5					0x734
+#define EMC_PMACRO_TX_SEL_CLK_SRC_0				0x740
+#define EMC_PMACRO_TX_SEL_CLK_SRC_1				0x744
+#define EMC_PMACRO_TX_SEL_CLK_SRC_3				0x74c
+#define EMC_PMACRO_TX_SEL_CLK_SRC_2				0x748
+#define EMC_PMACRO_TX_SEL_CLK_SRC_4				0x750
+#define EMC_PMACRO_TX_SEL_CLK_SRC_5				0x754
+#define EMC_PMACRO_DDLL_BYPASS					0x760
+#define EMC_PMACRO_DDLL_PWRD_0					0x770
+#define EMC_PMACRO_DDLL_PWRD_1					0x774
+#define EMC_PMACRO_DDLL_PWRD_2					0x778
+#define EMC_PMACRO_CMD_CTRL_0					0x780
+#define EMC_PMACRO_CMD_CTRL_1					0x784
+#define EMC_PMACRO_CMD_CTRL_2					0x788
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE0_0		0x800
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE0_1		0x804
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE0_2		0x808
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE0_3		0x80c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE1_0		0x810
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE1_1		0x814
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE1_2		0x818
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE1_3		0x81c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE2_0		0x820
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE2_1		0x824
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE2_2		0x828
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE2_3		0x82c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE3_0		0x830
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE3_1		0x834
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE3_2		0x838
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE3_3		0x83c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE4_0		0x840
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE4_1		0x844
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE4_2		0x848
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE4_3		0x84c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE5_0		0x850
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE5_1		0x854
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE5_2		0x858
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE5_3		0x85c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE6_0		0x860
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE6_1		0x864
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE6_2		0x868
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE6_3		0x86c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE7_0		0x870
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE7_1		0x874
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE7_2		0x878
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_BYTE7_3		0x87c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD0_0		0x880
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD0_1		0x884
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD0_2		0x888
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD0_3		0x88c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD1_0		0x890
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD1_1		0x894
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD1_2		0x898
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD1_3		0x89c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD2_0		0x8a0
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD2_1		0x8a4
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD2_2		0x8a8
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD2_3		0x8ac
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD3_0		0x8b0
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD3_1		0x8b4
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD3_2		0x8b8
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK0_CMD3_3		0x8bc
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE0_0		0x900
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE0_1		0x904
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE0_2		0x908
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE0_3		0x90c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE1_0		0x910
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE1_1		0x914
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE1_2		0x918
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE1_3		0x91c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE2_0		0x920
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE2_1		0x924
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE2_2		0x928
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE2_3		0x92c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE3_0		0x930
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE3_1		0x934
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE3_2		0x938
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE3_3		0x93c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE4_0		0x940
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE4_1		0x944
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE4_2		0x948
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE4_3		0x94c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE5_0		0x950
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE5_1		0x954
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE5_2		0x958
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE5_3		0x95c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE6_0		0x960
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE6_1		0x964
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE6_2		0x968
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE6_3		0x96c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE7_0		0x970
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE7_1		0x974
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE7_2		0x978
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_BYTE7_3		0x97c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD0_0		0x980
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD0_1		0x984
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD0_2		0x988
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD0_3		0x98c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD1_0		0x990
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD1_1		0x994
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD1_2		0x998
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD1_3		0x99c
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD2_0		0x9a0
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD2_1		0x9a4
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD2_2		0x9a8
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD2_3		0x9ac
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD3_0		0x9b0
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD3_1		0x9b4
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD3_2		0x9b8
+#define EMC_PMACRO_OB_DDLL_SHORT_DQ_RANK1_CMD3_3		0x9bc
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE0_0		0xa00
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE0_1		0xa04
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE0_2		0xa08
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE1_0		0xa10
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE1_1		0xa14
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE1_2		0xa18
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE2_0		0xa20
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE2_1		0xa24
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE2_2		0xa28
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE3_0		0xa30
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE3_1		0xa34
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE3_2		0xa38
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE4_0		0xa40
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE4_1		0xa44
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE4_2		0xa48
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE5_0		0xa50
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE5_1		0xa54
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE5_2		0xa58
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE6_0		0xa60
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE6_1		0xa64
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE6_2		0xa68
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE7_0		0xa70
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE7_1		0xa74
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK0_BYTE7_2		0xa78
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE0_0		0xb00
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE0_1		0xb04
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE0_2		0xb08
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE1_0		0xb10
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE1_1		0xb14
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE1_2		0xb18
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE2_0		0xb20
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE2_1		0xb24
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE2_2		0xb28
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE3_0		0xb30
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE3_1		0xb34
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE3_2		0xb38
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE4_0		0xb40
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE4_1		0xb44
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE4_2		0xb48
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE5_0		0xb50
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE5_1		0xb54
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE5_2		0xb58
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE6_0		0xb60
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE6_1		0xb64
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE6_2		0xb68
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE7_0		0xb70
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE7_1		0xb74
+#define EMC_PMACRO_IB_DDLL_SHORT_DQ_RANK1_BYTE7_2		0xb78
+#define EMC_PMACRO_IB_VREF_DQ_0					0xbe0
+#define EMC_PMACRO_IB_VREF_DQ_1					0xbe4
+#define EMC_PMACRO_IB_VREF_DQS_0				0xbf0
+#define EMC_PMACRO_IB_VREF_DQS_1				0xbf4
+#define EMC_PMACRO_DDLL_LONG_CMD_0				0xc00
+#define EMC_PMACRO_DDLL_LONG_CMD_1				0xc04
+#define EMC_PMACRO_DDLL_LONG_CMD_2				0xc08
+#define EMC_PMACRO_DDLL_LONG_CMD_3				0xc0c
+#define EMC_PMACRO_DDLL_LONG_CMD_4				0xc10
+#define EMC_PMACRO_DDLL_LONG_CMD_5				0xc14
+#define EMC_PMACRO_DDLL_SHORT_CMD_0				0xc20
+#define EMC_PMACRO_DDLL_SHORT_CMD_1				0xc24
+#define EMC_PMACRO_DDLL_SHORT_CMD_2				0xc28
+#define EMC_PMACRO_CFG_PM_GLOBAL_0				0xc30
+#define EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE0		BIT(16)
+#define EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE1		BIT(17)
+#define EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE2		BIT(18)
+#define EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE3		BIT(19)
+#define EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE4		BIT(20)
+#define EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE5		BIT(21)
+#define EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE6		BIT(22)
+#define EMC_PMACRO_CFG_PM_GLOBAL_0_DISABLE_CFG_BYTE7		BIT(23)
+#define EMC_PMACRO_VTTGEN_CTRL_0				0xc34
+#define EMC_PMACRO_VTTGEN_CTRL_1				0xc38
+#define EMC_PMACRO_BG_BIAS_CTRL_0				0xc3c
+#define EMC_PMACRO_BG_BIAS_CTRL_0_BG_E_PWRD			BIT(0)
+#define EMC_PMACRO_BG_BIAS_CTRL_0_BGLP_E_PWRD			BIT(2)
+#define EMC_PMACRO_PAD_CFG_CTRL					0xc40
+#define EMC_PMACRO_ZCTRL					0xc44
+#define EMC_PMACRO_CMD_PAD_RX_CTRL				0xc50
+#define EMC_PMACRO_DATA_PAD_RX_CTRL				0xc54
+#define EMC_PMACRO_CMD_RX_TERM_MODE				0xc58
+#define EMC_PMACRO_DATA_RX_TERM_MODE				0xc5c
+#define EMC_PMACRO_CMD_PAD_TX_CTRL				0xc60
+#define EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_E_DCC		BIT(1)
+#define EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSP_TX_E_DCC		BIT(9)
+#define EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQSN_TX_E_DCC		BIT(16)
+#define EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_CMD_TX_E_DCC		BIT(24)
+#define EMC_PMACRO_CMD_PAD_TX_CTRL_CMD_DQ_TX_DRVFORCEON		BIT(26)
+
+#define EMC_PMACRO_DATA_PAD_TX_CTRL				0xc64
+#define EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_E_IVREF		BIT(0)
+#define EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQ_TX_E_DCC		BIT(1)
+#define EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQS_E_IVREF		BIT(8)
+#define EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSP_TX_E_DCC		BIT(9)
+#define EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_DQSN_TX_E_DCC		BIT(16)
+#define EMC_PMACRO_DATA_PAD_TX_CTRL_DATA_CMD_TX_E_DCC		BIT(24)
+
+#define EMC_PMACRO_COMMON_PAD_TX_CTRL				0xc68
+#define EMC_PMACRO_AUTOCAL_CFG_COMMON				0xc78
+#define EMC_PMACRO_AUTOCAL_CFG_COMMON_E_CAL_BYPASS_DVFS		BIT(16)
+#define EMC_PMACRO_VTTGEN_CTRL_2				0xcf0
+#define EMC_PMACRO_IB_RXRT					0xcf4
+#define EMC_PMACRO_TRAINING_CTRL_0				0xcf8
+#define EMC_PMACRO_TRAINING_CTRL_0_CH0_TRAINING_E_WRPTR		BIT(3)
+#define EMC_PMACRO_TRAINING_CTRL_1				0xcfc
+#define EMC_PMACRO_TRAINING_CTRL_1_CH1_TRAINING_E_WRPTR		BIT(3)
+#define EMC_TRAINING_CTRL					0xe04
+#define EMC_TRAINING_QUSE_CORS_CTRL				0xe0c
+#define EMC_TRAINING_QUSE_FINE_CTRL				0xe10
+#define EMC_TRAINING_QUSE_CTRL_MISC				0xe14
+#define EMC_TRAINING_WRITE_FINE_CTRL				0xe18
+#define EMC_TRAINING_WRITE_CTRL_MISC				0xe1c
+#define EMC_TRAINING_WRITE_VREF_CTRL				0xe20
+#define EMC_TRAINING_READ_FINE_CTRL				0xe24
+#define EMC_TRAINING_READ_CTRL_MISC				0xe28
+#define EMC_TRAINING_READ_VREF_CTRL				0xe2c
+#define EMC_TRAINING_CA_FINE_CTRL				0xe30
+#define EMC_TRAINING_CA_CTRL_MISC				0xe34
+#define EMC_TRAINING_CA_CTRL_MISC1				0xe38
+#define EMC_TRAINING_CA_VREF_CTRL				0xe3c
+#define EMC_TRAINING_SETTLE					0xe44
+#define EMC_TRAINING_MPC					0xe5c
+#define EMC_TRAINING_VREF_SETTLE				0xe6c
+#define EMC_TRAINING_QUSE_VREF_CTRL				0xed0
+#define EMC_TRAINING_OPT_DQS_IB_VREF_RANK0			0xed4
+#define EMC_TRAINING_OPT_DQS_IB_VREF_RANK1			0xed8
+
+#define EMC_COPY_TABLE_PARAM_PERIODIC_FIELDS			BIT(0)
+#define EMC_COPY_TABLE_PARAM_TRIM_REGS				BIT(1)
+
+enum burst_regs_list {
+	EMC_RP_INDEX = 6,
+	EMC_R2P_INDEX = 9,
+	EMC_W2P_INDEX,
+	EMC_MRW6_INDEX = 31,
+	EMC_REFRESH_INDEX = 41,
+	EMC_PRE_REFRESH_REQ_CNT_INDEX = 43,
+	EMC_TRPAB_INDEX = 59,
+	EMC_MRW7_INDEX = 62,
+	EMC_FBIO_CFG5_INDEX = 65,
+	EMC_FBIO_CFG7_INDEX,
+	EMC_CFG_DIG_DLL_INDEX,
+	EMC_ZCAL_INTERVAL_INDEX = 139,
+	EMC_ZCAL_WAIT_CNT_INDEX,
+	EMC_MRS_WAIT_CNT_INDEX = 141,
+	EMC_DLL_CFG_0_INDEX = 144,
+	EMC_PMACRO_AUTOCAL_CFG_COMMON_INDEX = 146,
+	EMC_CFG_INDEX = 148,
+	EMC_DYN_SELF_REF_CONTROL_INDEX = 150,
+	EMC_PMACRO_CMD_PAD_TX_CTRL_INDEX = 161,
+	EMC_PMACRO_DATA_PAD_TX_CTRL_INDEX,
+	EMC_PMACRO_COMMON_PAD_TX_CTRL_INDEX,
+	EMC_PMACRO_BRICK_CTRL_RFU1_INDEX = 167,
+	EMC_PMACRO_BG_BIAS_CTRL_0_INDEX = 171,
+	EMC_MRW14_INDEX = 199,
+	EMC_MRW15_INDEX = 220,
+};
+
+enum trim_regs_list {
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0_INDEX = 60,
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1_INDEX,
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2_INDEX,
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3_INDEX,
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_4_INDEX,
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_5_INDEX,
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0_INDEX,
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1_INDEX,
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2_INDEX,
+	EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3_INDEX,
+};
+
+enum burst_mc_regs_list {
+	MC_EMEM_ARB_MISC0_INDEX = 20,
+};
+
+enum {
+	T_RP,
+	T_FC_LPDDR4,
+	T_RFC,
+	T_PDEX,
+	RL,
+};
+
+enum {
+	AUTO_PD = 0,
+	MAN_SR  = 2,
+};
+
+enum {
+	ASSEMBLY = 0,
+	ACTIVE,
+};
+
+enum {
+	C0D0U0,
+	C0D0U1,
+	C0D1U0,
+	C0D1U1,
+	C1D0U0,
+	C1D0U1,
+	C1D1U0,
+	C1D1U1,
+	DRAM_CLKTREE_NUM,
+};
+
+#define VREF_REGS_PER_CHANNEL_SIZE 4
+#define DRAM_TIMINGS_NUM 5
+#define BURST_REGS_PER_CHANNEL_SIZE 8
+#define TRIM_REGS_PER_CHANNEL_SIZE 10
+#define PTFV_ARRAY_SIZE 12
+#define SAVE_RESTORE_MOD_REGS_SIZE 12
+#define TRAINING_MOD_REGS_SIZE 20
+#define BURST_UP_DOWN_REGS_SIZE 24
+#define BURST_MC_REGS_SIZE 33
+#define TRIM_REGS_SIZE 138
+#define BURST_REGS_SIZE 221
+
+struct tegra210_emc_per_channel_regs {
+	u16 bank;
+	u16 offset;
+};
+
+struct tegra210_emc_table_register_offsets {
+	u16 burst[BURST_REGS_SIZE];
+	u16 trim[TRIM_REGS_SIZE];
+	u16 burst_mc[BURST_MC_REGS_SIZE];
+	u16 la_scale[BURST_UP_DOWN_REGS_SIZE];
+	struct tegra210_emc_per_channel_regs burst_per_channel[BURST_REGS_PER_CHANNEL_SIZE];
+	struct tegra210_emc_per_channel_regs trim_per_channel[TRIM_REGS_PER_CHANNEL_SIZE];
+	struct tegra210_emc_per_channel_regs vref_per_channel[VREF_REGS_PER_CHANNEL_SIZE];
+};
+
+struct tegra210_emc_timing {
+	u32 revision;
+	const char dvfs_ver[60];
+	u32 rate;
+	u32 min_volt;
+	u32 gpu_min_volt;
+	const char clock_src[32];
+	u32 clk_src_emc;
+	u32 needs_training;
+	u32 training_pattern;
+	u32 trained;
+
+	u32 periodic_training;
+	u32 trained_dram_clktree[DRAM_CLKTREE_NUM];
+	u32 current_dram_clktree[DRAM_CLKTREE_NUM];
+	u32 run_clocks;
+	u32 tree_margin;
+
+	u32 num_burst;
+	u32 num_burst_per_ch;
+	u32 num_trim;
+	u32 num_trim_per_ch;
+	u32 num_mc_regs;
+	u32 num_up_down;
+	u32 vref_num;
+	u32 training_mod_num;
+	u32 dram_timing_num;
+
+	u32 ptfv_list[PTFV_ARRAY_SIZE];
+
+	u32 burst_regs[BURST_REGS_SIZE];
+	u32 burst_reg_per_ch[BURST_REGS_PER_CHANNEL_SIZE];
+	u32 shadow_regs_ca_train[BURST_REGS_SIZE];
+	u32 shadow_regs_quse_train[BURST_REGS_SIZE];
+	u32 shadow_regs_rdwr_train[BURST_REGS_SIZE];
+
+	u32 trim_regs[TRIM_REGS_SIZE];
+	u32 trim_perch_regs[TRIM_REGS_PER_CHANNEL_SIZE];
+
+	u32 vref_perch_regs[VREF_REGS_PER_CHANNEL_SIZE];
+
+	u32 dram_timings[DRAM_TIMINGS_NUM];
+	u32 training_mod_regs[TRAINING_MOD_REGS_SIZE];
+	u32 save_restore_mod_regs[SAVE_RESTORE_MOD_REGS_SIZE];
+	u32 burst_mc_regs[BURST_MC_REGS_SIZE];
+	u32 la_scale_regs[BURST_UP_DOWN_REGS_SIZE];
+
+	u32 min_mrs_wait;
+	u32 emc_mrw;
+	u32 emc_mrw2;
+	u32 emc_mrw3;
+	u32 emc_mrw4;
+	u32 emc_mrw9;
+	u32 emc_mrs;
+	u32 emc_emrs;
+	u32 emc_emrs2;
+	u32 emc_auto_cal_config;
+	u32 emc_auto_cal_config2;
+	u32 emc_auto_cal_config3;
+	u32 emc_auto_cal_config4;
+	u32 emc_auto_cal_config5;
+	u32 emc_auto_cal_config6;
+	u32 emc_auto_cal_config7;
+	u32 emc_auto_cal_config8;
+	u32 emc_cfg_2;
+	u32 emc_sel_dpd_ctrl;
+	u32 emc_fdpd_ctrl_cmd_no_ramp;
+	u32 dll_clk_src;
+	u32 clk_out_enb_x_0_clk_enb_emc_dll;
+	u32 latency;
+};
+
+enum tegra210_emc_refresh {
+	TEGRA210_EMC_REFRESH_NOMINAL = 0,
+	TEGRA210_EMC_REFRESH_2X,
+	TEGRA210_EMC_REFRESH_4X,
+	TEGRA210_EMC_REFRESH_THROTTLE, /* 4x Refresh + derating. */
+};
+
+#define DRAM_TYPE_DDR3		0
+#define DRAM_TYPE_LPDDR4	1
+#define DRAM_TYPE_LPDDR2	2
+#define DRAM_TYPE_DDR2		3
+
+struct tegra210_emc {
+	struct tegra_mc *mc;
+	struct device *dev;
+	struct clk *clk;
+
+	/* nominal EMC frequency table */
+	struct tegra210_emc_timing *nominal;
+	/* derated EMC frequency table */
+	struct tegra210_emc_timing *derated;
+
+	/* currently selected table (nominal or derated) */
+	struct tegra210_emc_timing *timings;
+	unsigned int num_timings;
+
+	const struct tegra210_emc_table_register_offsets *offsets;
+
+	const struct tegra210_emc_sequence *sequence;
+	spinlock_t lock;
+
+	void __iomem *regs, *channel[2];
+	unsigned int num_channels;
+	unsigned int num_devices;
+	unsigned int dram_type;
+
+	struct tegra210_emc_timing *last;
+	struct tegra210_emc_timing *next;
+
+	unsigned int training_interval;
+	struct timer_list training;
+
+	enum tegra210_emc_refresh refresh;
+	unsigned int refresh_poll_interval;
+	struct timer_list refresh_timer;
+	unsigned int temperature;
+	atomic_t refresh_poll;
+
+	ktime_t clkchange_time;
+	int clkchange_delay;
+
+	unsigned long resume_rate;
+
+	struct {
+		struct dentry *root;
+		unsigned long min_rate;
+		unsigned long max_rate;
+		unsigned int temperature;
+	} debugfs;
+
+	struct tegra210_clk_emc_provider provider;
+};
+
+struct tegra210_emc_sequence {
+	u8 revision;
+	void (*set_clock)(struct tegra210_emc *emc, u32 clksrc);
+	u32 (*periodic_compensation)(struct tegra210_emc *emc);
+};
+
+static inline void emc_writel(struct tegra210_emc *emc, u32 value,
+			      unsigned int offset)
+{
+	writel_relaxed(value, emc->regs + offset);
+}
+
+static inline u32 emc_readl(struct tegra210_emc *emc, unsigned int offset)
+{
+	return readl_relaxed(emc->regs + offset);
+}
+
+static inline void emc_channel_writel(struct tegra210_emc *emc,
+				      unsigned int channel,
+				      u32 value, unsigned int offset)
+{
+	writel_relaxed(value, emc->channel[channel] + offset);
+}
+
+static inline u32 emc_channel_readl(struct tegra210_emc *emc,
+				    unsigned int channel, unsigned int offset)
+{
+	return readl_relaxed(emc->channel[channel] + offset);
+}
+
+static inline void ccfifo_writel(struct tegra210_emc *emc, u32 value,
+				 unsigned int offset, u32 delay)
+{
+	writel_relaxed(value, emc->regs + EMC_CCFIFO_DATA);
+
+	value = EMC_CCFIFO_ADDR_STALL_BY_1 | EMC_CCFIFO_ADDR_STALL(delay) |
+		EMC_CCFIFO_ADDR_OFFSET(offset);
+	writel_relaxed(value, emc->regs + EMC_CCFIFO_ADDR);
+}
+
+static inline u32 div_o3(u32 a, u32 b)
+{
+	u32 result = a / b;
+
+	if ((b * result) < a)
+		return result + 1;
+
+	return result;
+}
+
+/* from tegra210-emc-r21021.c */
+extern const struct tegra210_emc_sequence tegra210_emc_r21021;
+
+int tegra210_emc_set_refresh(struct tegra210_emc *emc,
+			     enum tegra210_emc_refresh refresh);
+u32 tegra210_emc_mrr_read(struct tegra210_emc *emc, unsigned int chip,
+			  unsigned int address);
+void tegra210_emc_do_clock_change(struct tegra210_emc *emc, u32 clksrc);
+void tegra210_emc_set_shadow_bypass(struct tegra210_emc *emc, int set);
+void tegra210_emc_timing_update(struct tegra210_emc *emc);
+u32 tegra210_emc_get_dll_state(struct tegra210_emc_timing *next);
+struct tegra210_emc_timing *tegra210_emc_find_timing(struct tegra210_emc *emc,
+						     unsigned long rate);
+void tegra210_emc_adjust_timing(struct tegra210_emc *emc,
+				struct tegra210_emc_timing *timing);
+int tegra210_emc_wait_for_update(struct tegra210_emc *emc, unsigned int channel,
+				 unsigned int offset, u32 bit_mask, bool state);
+unsigned long tegra210_emc_actual_osc_clocks(u32 in);
+u32 tegra210_emc_compensate(struct tegra210_emc_timing *next, u32 offset);
+void tegra210_emc_dll_disable(struct tegra210_emc *emc);
+void tegra210_emc_dll_enable(struct tegra210_emc *emc);
+u32 tegra210_emc_dll_prelock(struct tegra210_emc *emc, u32 clksrc);
+u32 tegra210_emc_dvfs_power_ramp_down(struct tegra210_emc *emc, u32 clk,
+				      bool flip_backward);
+u32 tegra210_emc_dvfs_power_ramp_up(struct tegra210_emc *emc, u32 clk,
+				    bool flip_backward);
+void tegra210_emc_reset_dram_clktree_values(struct tegra210_emc_timing *timing);
+void tegra210_emc_start_periodic_compensation(struct tegra210_emc *emc);
+
+#endif
diff --git a/drivers/memory/tegra/tegra210-mc.h b/drivers/memory/tegra/tegra210-mc.h
new file mode 100644
index 000000000000..b9b91ceb4730
--- /dev/null
+++ b/drivers/memory/tegra/tegra210-mc.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef TEGRA210_MC_H
+#define TEGRA210_MC_H
+
+#include "mc.h"
+
+/* register definitions */
+#define MC_LATENCY_ALLOWANCE_AVPC_0				0x2e4
+#define MC_LATENCY_ALLOWANCE_HC_0				0x310
+#define MC_LATENCY_ALLOWANCE_HC_1				0x314
+#define MC_LATENCY_ALLOWANCE_MPCORE_0				0x320
+#define MC_LATENCY_ALLOWANCE_NVENC_0				0x328
+#define MC_LATENCY_ALLOWANCE_PPCS_0				0x344
+#define MC_LATENCY_ALLOWANCE_PPCS_1				0x348
+#define MC_LATENCY_ALLOWANCE_ISP2_0				0x370
+#define MC_LATENCY_ALLOWANCE_ISP2_1				0x374
+#define MC_LATENCY_ALLOWANCE_XUSB_0				0x37c
+#define MC_LATENCY_ALLOWANCE_XUSB_1				0x380
+#define MC_LATENCY_ALLOWANCE_TSEC_0				0x390
+#define MC_LATENCY_ALLOWANCE_VIC_0				0x394
+#define MC_LATENCY_ALLOWANCE_VI2_0				0x398
+#define MC_LATENCY_ALLOWANCE_GPU_0				0x3ac
+#define MC_LATENCY_ALLOWANCE_SDMMCA_0				0x3b8
+#define MC_LATENCY_ALLOWANCE_SDMMCAA_0				0x3bc
+#define MC_LATENCY_ALLOWANCE_SDMMC_0				0x3c0
+#define MC_LATENCY_ALLOWANCE_SDMMCAB_0				0x3c4
+#define MC_LATENCY_ALLOWANCE_GPU2_0				0x3e8
+#define MC_LATENCY_ALLOWANCE_NVDEC_0				0x3d8
+#define MC_MLL_MPCORER_PTSA_RATE				0x44c
+#define MC_FTOP_PTSA_RATE					0x50c
+#define MC_EMEM_ARB_TIMING_RFCPB				0x6c0
+#define MC_EMEM_ARB_TIMING_CCDMW				0x6c4
+#define MC_EMEM_ARB_REFPB_HP_CTRL				0x6f0
+#define MC_EMEM_ARB_REFPB_BANK_CTRL				0x6f4
+#define MC_PTSA_GRANT_DECREMENT					0x960
+#define MC_EMEM_ARB_DHYST_CTRL					0xbcc
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_0			0xbd0
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_1			0xbd4
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_2			0xbd8
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_3			0xbdc
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_4			0xbe0
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_5			0xbe4
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_6			0xbe8
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_7			0xbec
+
+#endif
diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c
index b42bdb667e85..727dc7153390 100644
--- a/drivers/memory/tegra/tegra30-emc.c
+++ b/drivers/memory/tegra/tegra30-emc.c
@@ -1275,11 +1275,11 @@ static void tegra_emc_debugfs_init(struct tegra_emc *emc)
 		return;
 	}
 
-	debugfs_create_file("available_rates", S_IRUGO, emc->debugfs.root,
+	debugfs_create_file("available_rates", 0444, emc->debugfs.root,
 			    emc, &tegra_emc_debug_available_rates_fops);
-	debugfs_create_file("min_rate", S_IRUGO | S_IWUSR, emc->debugfs.root,
+	debugfs_create_file("min_rate", 0644, emc->debugfs.root,
 			    emc, &tegra_emc_debug_min_rate_fops);
-	debugfs_create_file("max_rate", S_IRUGO | S_IWUSR, emc->debugfs.root,
+	debugfs_create_file("max_rate", 0644, emc->debugfs.root,
 			    emc, &tegra_emc_debug_max_rate_fops);
 }
 
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index c2dd322691d1..68aea22f2b89 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -5052,9 +5052,11 @@ GetLanConfigPages(MPT_ADAPTER *ioc)
  *	@ioc: Pointer to MPT_ADAPTER structure
  *	@persist_opcode: see below
  *
- *	MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
- *		devices not currently present.
- *	MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
+ *	===============================  ======================================
+ *	MPI_SAS_OP_CLEAR_NOT_PRESENT     Free all persist TargetID mappings for
+ *					 devices not currently present.
+ *	MPI_SAS_OP_CLEAR_ALL_PERSISTENT  Clear al persist TargetID mappings
+ *	===============================  ======================================
  *
  *	NOTE: Don't use not this function during interrupt time.
  *
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 0a59249198d3..54b6aa4aaab1 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -551,7 +551,7 @@ config INTEL_SOC_PMIC
 
 config INTEL_SOC_PMIC_BXTWC
 	tristate "Support for Intel Broxton Whiskey Cove PMIC"
-	depends on INTEL_PMC_IPC
+	depends on MFD_INTEL_PMC_BXT
 	select MFD_CORE
 	select REGMAP_IRQ
 	help
@@ -593,7 +593,7 @@ config INTEL_SOC_PMIC_MRFLD
 	tristate "Support for Intel Merrifield Basin Cove PMIC"
 	depends on GPIOLIB
 	depends on ACPI
-	depends on INTEL_SCU_IPC
+	depends on INTEL_SCU
 	select MFD_CORE
 	select REGMAP_IRQ
 	help
@@ -625,13 +625,27 @@ config MFD_INTEL_LPSS_PCI
 
 config MFD_INTEL_MSIC
 	bool "Intel MSIC"
-	depends on INTEL_SCU_IPC
+	depends on INTEL_SCU
 	select MFD_CORE
 	help
 	  Select this option to enable access to Intel MSIC (Avatele
 	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
 	  devices used in Intel Medfield platforms.
 
+config MFD_INTEL_PMC_BXT
+	tristate "Intel PMC Driver for Broxton"
+	depends on X86
+	depends on X86_PLATFORM_DEVICES
+	depends on ACPI
+	select INTEL_SCU_IPC
+	select MFD_CORE
+	help
+	  This driver provides support for the PMC (Power Management
+	  Controller) on Intel Broxton and Apollo Lake. The PMC is a
+	  multi-function device that exposes IPC, General Control
+	  Register and P-unit access. In addition this creates devices
+	  for iTCO watchdog and telemetry that are part of the PMC.
+
 config MFD_IPAQ_MICRO
 	bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
 	depends on SA1100_H3100 || SA1100_H3600
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f935d10cbf0f..7761f84a96eb 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -212,6 +212,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS)	+= intel-lpss.o
 obj-$(CONFIG_MFD_INTEL_LPSS_PCI)	+= intel-lpss-pci.o
 obj-$(CONFIG_MFD_INTEL_LPSS_ACPI)	+= intel-lpss-acpi.o
 obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
+obj-$(CONFIG_MFD_INTEL_PMC_BXT)	+= intel_pmc_bxt.o
 obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
 obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
diff --git a/drivers/mfd/intel_pmc_bxt.c b/drivers/mfd/intel_pmc_bxt.c
new file mode 100644
index 000000000000..9f01d38acc7f
--- /dev/null
+++ b/drivers/mfd/intel_pmc_bxt.c
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Intel Broxton PMC
+ *
+ * (C) Copyright 2014 - 2020 Intel Corporation
+ *
+ * This driver is based on Intel SCU IPC driver (intel_scu_ipc.c) by
+ * Sreedhara DS <sreedhara.ds@intel.com>
+ *
+ * The PMC (Power Management Controller) running on the ARC processor
+ * communicates with another entity running in the IA (Intel Architecture)
+ * core through an IPC (Intel Processor Communications) mechanism which in
+ * turn sends messages between the IA and the PMC.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_pmc_bxt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/itco_wdt.h>
+
+#include <asm/intel_scu_ipc.h>
+
+/* Residency with clock rate at 19.2MHz to usecs */
+#define S0IX_RESIDENCY_IN_USECS(d, s)		\
+({						\
+	u64 result = 10ull * ((d) + (s));	\
+	do_div(result, 192);			\
+	result;					\
+})
+
+/* Resources exported from IFWI */
+#define PLAT_RESOURCE_IPC_INDEX		0
+#define PLAT_RESOURCE_IPC_SIZE		0x1000
+#define PLAT_RESOURCE_GCR_OFFSET	0x1000
+#define PLAT_RESOURCE_GCR_SIZE		0x1000
+#define PLAT_RESOURCE_BIOS_DATA_INDEX	1
+#define PLAT_RESOURCE_BIOS_IFACE_INDEX	2
+#define PLAT_RESOURCE_TELEM_SSRAM_INDEX	3
+#define PLAT_RESOURCE_ISP_DATA_INDEX	4
+#define PLAT_RESOURCE_ISP_IFACE_INDEX	5
+#define PLAT_RESOURCE_GTD_DATA_INDEX	6
+#define PLAT_RESOURCE_GTD_IFACE_INDEX	7
+#define PLAT_RESOURCE_ACPI_IO_INDEX	0
+
+/*
+ * BIOS does not create an ACPI device for each PMC function, but
+ * exports multiple resources from one ACPI device (IPC) for multiple
+ * functions. This driver is responsible for creating a child device and
+ * to export resources for those functions.
+ */
+#define SMI_EN_OFFSET			0x0040
+#define SMI_EN_SIZE			4
+#define TCO_BASE_OFFSET			0x0060
+#define TCO_REGS_SIZE			16
+#define TELEM_SSRAM_SIZE		240
+#define TELEM_PMC_SSRAM_OFFSET		0x1b00
+#define TELEM_PUNIT_SSRAM_OFFSET	0x1a00
+
+/* Commands */
+#define PMC_NORTHPEAK_CTRL		0xed
+
+static inline bool is_gcr_valid(u32 offset)
+{
+	return offset < PLAT_RESOURCE_GCR_SIZE - 8;
+}
+
+/**
+ * intel_pmc_gcr_read64() - Read a 64-bit PMC GCR register
+ * @pmc: PMC device pointer
+ * @offset: offset of GCR register from GCR address base
+ * @data: data pointer for storing the register output
+ *
+ * Reads the 64-bit PMC GCR register at given offset.
+ *
+ * Return: Negative value on error or 0 on success.
+ */
+int intel_pmc_gcr_read64(struct intel_pmc_dev *pmc, u32 offset, u64 *data)
+{
+	if (!is_gcr_valid(offset))
+		return -EINVAL;
+
+	spin_lock(&pmc->gcr_lock);
+	*data = readq(pmc->gcr_mem_base + offset);
+	spin_unlock(&pmc->gcr_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmc_gcr_read64);
+
+/**
+ * intel_pmc_gcr_update() - Update PMC GCR register bits
+ * @pmc: PMC device pointer
+ * @offset: offset of GCR register from GCR address base
+ * @mask: bit mask for update operation
+ * @val: update value
+ *
+ * Updates the bits of given GCR register as specified by
+ * @mask and @val.
+ *
+ * Return: Negative value on error or 0 on success.
+ */
+int intel_pmc_gcr_update(struct intel_pmc_dev *pmc, u32 offset, u32 mask, u32 val)
+{
+	u32 new_val;
+
+	if (!is_gcr_valid(offset))
+		return -EINVAL;
+
+	spin_lock(&pmc->gcr_lock);
+	new_val = readl(pmc->gcr_mem_base + offset);
+
+	new_val = (new_val & ~mask) | (val & mask);
+	writel(new_val, pmc->gcr_mem_base + offset);
+
+	new_val = readl(pmc->gcr_mem_base + offset);
+	spin_unlock(&pmc->gcr_lock);
+
+	/* Check whether the bit update is successful */
+	return (new_val & mask) != (val & mask) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmc_gcr_update);
+
+/**
+ * intel_pmc_s0ix_counter_read() - Read S0ix residency
+ * @pmc: PMC device pointer
+ * @data: Out param that contains current S0ix residency count.
+ *
+ * Writes to @data how many usecs the system has been in low-power S0ix
+ * state.
+ *
+ * Return: An error code or 0 on success.
+ */
+int intel_pmc_s0ix_counter_read(struct intel_pmc_dev *pmc, u64 *data)
+{
+	u64 deep, shlw;
+
+	spin_lock(&pmc->gcr_lock);
+	deep = readq(pmc->gcr_mem_base + PMC_GCR_TELEM_DEEP_S0IX_REG);
+	shlw = readq(pmc->gcr_mem_base + PMC_GCR_TELEM_SHLW_S0IX_REG);
+	spin_unlock(&pmc->gcr_lock);
+
+	*data = S0IX_RESIDENCY_IN_USECS(deep, shlw);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmc_s0ix_counter_read);
+
+/**
+ * simplecmd_store() - Send a simple IPC command
+ * @dev: Device under the attribute is
+ * @attr: Attribute in question
+ * @buf: Buffer holding data to be stored to the attribute
+ * @count: Number of bytes in @buf
+ *
+ * Expects a string with two integers separated with space. These two
+ * values hold command and subcommand that is send to PMC.
+ *
+ * Return: Number number of bytes written (@count) or negative errno in
+ *	   case of error.
+ */
+static ssize_t simplecmd_store(struct device *dev, struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct intel_pmc_dev *pmc = dev_get_drvdata(dev);
+	struct intel_scu_ipc_dev *scu = pmc->scu;
+	int subcmd;
+	int cmd;
+	int ret;
+
+	ret = sscanf(buf, "%d %d", &cmd, &subcmd);
+	if (ret != 2) {
+		dev_err(dev, "Invalid values, expected: cmd subcmd\n");
+		return -EINVAL;
+	}
+
+	ret = intel_scu_ipc_dev_simple_command(scu, cmd, subcmd);
+	if (ret)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_WO(simplecmd);
+
+/**
+ * northpeak_store() - Enable or disable Northpeak
+ * @dev: Device under the attribute is
+ * @attr: Attribute in question
+ * @buf: Buffer holding data to be stored to the attribute
+ * @count: Number of bytes in @buf
+ *
+ * Expects an unsigned integer. Non-zero enables Northpeak and zero
+ * disables it.
+ *
+ * Return: Number number of bytes written (@count) or negative errno in
+ *	   case of error.
+ */
+static ssize_t northpeak_store(struct device *dev, struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct intel_pmc_dev *pmc = dev_get_drvdata(dev);
+	struct intel_scu_ipc_dev *scu = pmc->scu;
+	unsigned long val;
+	int subcmd;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/* Northpeak is enabled if subcmd == 1 and disabled if it is 0 */
+	if (val)
+		subcmd = 1;
+	else
+		subcmd = 0;
+
+	ret = intel_scu_ipc_dev_simple_command(scu, PMC_NORTHPEAK_CTRL, subcmd);
+	if (ret)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_WO(northpeak);
+
+static struct attribute *intel_pmc_attrs[] = {
+	&dev_attr_northpeak.attr,
+	&dev_attr_simplecmd.attr,
+	NULL
+};
+
+static const struct attribute_group intel_pmc_group = {
+	.attrs = intel_pmc_attrs,
+};
+
+static const struct attribute_group *intel_pmc_groups[] = {
+	&intel_pmc_group,
+	NULL
+};
+
+static struct resource punit_res[6];
+
+static struct mfd_cell punit = {
+	.name = "intel_punit_ipc",
+	.resources = punit_res,
+};
+
+static struct itco_wdt_platform_data tco_pdata = {
+	.name = "Apollo Lake SoC",
+	.version = 5,
+	.no_reboot_use_pmc = true,
+};
+
+static struct resource tco_res[2];
+
+static const struct mfd_cell tco = {
+	.name = "iTCO_wdt",
+	.ignore_resource_conflicts = true,
+	.resources = tco_res,
+	.num_resources = ARRAY_SIZE(tco_res),
+	.platform_data = &tco_pdata,
+	.pdata_size = sizeof(tco_pdata),
+};
+
+static const struct resource telem_res[] = {
+	DEFINE_RES_MEM(TELEM_PUNIT_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
+	DEFINE_RES_MEM(TELEM_PMC_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
+};
+
+static const struct mfd_cell telem = {
+	.name = "intel_telemetry",
+	.resources = telem_res,
+	.num_resources = ARRAY_SIZE(telem_res),
+};
+
+static int intel_pmc_get_tco_resources(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	if (acpi_has_watchdog())
+		return 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO,
+				    PLAT_RESOURCE_ACPI_IO_INDEX);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get IO resource\n");
+		return -EINVAL;
+	}
+
+	tco_res[0].flags = IORESOURCE_IO;
+	tco_res[0].start = res->start + TCO_BASE_OFFSET;
+	tco_res[0].end = tco_res[0].start + TCO_REGS_SIZE - 1;
+	tco_res[1].flags = IORESOURCE_IO;
+	tco_res[1].start = res->start + SMI_EN_OFFSET;
+	tco_res[1].end = tco_res[1].start + SMI_EN_SIZE - 1;
+
+	return 0;
+}
+
+static int intel_pmc_get_resources(struct platform_device *pdev,
+				   struct intel_pmc_dev *pmc,
+				   struct intel_scu_ipc_data *scu_data)
+{
+	struct resource gcr_res;
+	size_t npunit_res = 0;
+	struct resource *res;
+	int ret;
+
+	scu_data->irq = platform_get_irq_optional(pdev, 0);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_IPC_INDEX);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get IPC resource\n");
+		return -EINVAL;
+	}
+
+	/* IPC registers */
+	scu_data->mem.flags = res->flags;
+	scu_data->mem.start = res->start;
+	scu_data->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
+
+	/* GCR registers */
+	gcr_res.flags = res->flags;
+	gcr_res.start = res->start + PLAT_RESOURCE_GCR_OFFSET;
+	gcr_res.end = gcr_res.start + PLAT_RESOURCE_GCR_SIZE - 1;
+
+	pmc->gcr_mem_base = devm_ioremap_resource(&pdev->dev, &gcr_res);
+	if (IS_ERR(pmc->gcr_mem_base))
+		return PTR_ERR(pmc->gcr_mem_base);
+
+	/* Only register iTCO watchdog if there is no WDAT ACPI table */
+	ret = intel_pmc_get_tco_resources(pdev);
+	if (ret)
+		return ret;
+
+	/* BIOS data register */
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_BIOS_DATA_INDEX);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get resource of P-unit BIOS data\n");
+		return -EINVAL;
+	}
+	punit_res[npunit_res++] = *res;
+
+	/* BIOS interface register */
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_BIOS_IFACE_INDEX);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get resource of P-unit BIOS interface\n");
+		return -EINVAL;
+	}
+	punit_res[npunit_res++] = *res;
+
+	/* ISP data register, optional */
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_ISP_DATA_INDEX);
+	if (res)
+		punit_res[npunit_res++] = *res;
+
+	/* ISP interface register, optional */
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_ISP_IFACE_INDEX);
+	if (res)
+		punit_res[npunit_res++] = *res;
+
+	/* GTD data register, optional */
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_GTD_DATA_INDEX);
+	if (res)
+		punit_res[npunit_res++] = *res;
+
+	/* GTD interface register, optional */
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_GTD_IFACE_INDEX);
+	if (res)
+		punit_res[npunit_res++] = *res;
+
+	punit.num_resources = npunit_res;
+
+	/* Telemetry SSRAM is optional */
+	res = platform_get_resource(pdev, IORESOURCE_MEM,
+				    PLAT_RESOURCE_TELEM_SSRAM_INDEX);
+	if (res)
+		pmc->telem_base = res;
+
+	return 0;
+}
+
+static int intel_pmc_create_devices(struct intel_pmc_dev *pmc)
+{
+	int ret;
+
+	if (!acpi_has_watchdog()) {
+		ret = devm_mfd_add_devices(pmc->dev, PLATFORM_DEVID_AUTO, &tco,
+					   1, NULL, 0, NULL);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_mfd_add_devices(pmc->dev, PLATFORM_DEVID_AUTO, &punit, 1,
+				   NULL, 0, NULL);
+	if (ret)
+		return ret;
+
+	if (pmc->telem_base) {
+		ret = devm_mfd_add_devices(pmc->dev, PLATFORM_DEVID_AUTO,
+					   &telem, 1, pmc->telem_base, 0, NULL);
+	}
+
+	return ret;
+}
+
+static const struct acpi_device_id intel_pmc_acpi_ids[] = {
+	{ "INT34D2" },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, intel_pmc_acpi_ids);
+
+static int intel_pmc_probe(struct platform_device *pdev)
+{
+	struct intel_scu_ipc_data scu_data = {};
+	struct intel_pmc_dev *pmc;
+	int ret;
+
+	pmc = devm_kzalloc(&pdev->dev, sizeof(*pmc), GFP_KERNEL);
+	if (!pmc)
+		return -ENOMEM;
+
+	pmc->dev = &pdev->dev;
+	spin_lock_init(&pmc->gcr_lock);
+
+	ret = intel_pmc_get_resources(pdev, pmc, &scu_data);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request resources\n");
+		return ret;
+	}
+
+	pmc->scu = devm_intel_scu_ipc_register(&pdev->dev, &scu_data);
+	if (IS_ERR(pmc->scu))
+		return PTR_ERR(pmc->scu);
+
+	platform_set_drvdata(pdev, pmc);
+
+	ret = intel_pmc_create_devices(pmc);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to create PMC devices\n");
+
+	return ret;
+}
+
+static struct platform_driver intel_pmc_driver = {
+	.probe = intel_pmc_probe,
+	.driver = {
+		.name = "intel_pmc_bxt",
+		.acpi_match_table = intel_pmc_acpi_ids,
+		.dev_groups = intel_pmc_groups,
+	},
+};
+module_platform_driver(intel_pmc_driver);
+
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
+MODULE_DESCRIPTION("Intel Broxton PMC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index 739cfb5b69fe..eba89780dbe7 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -15,7 +15,7 @@
 #include <linux/mfd/intel_soc_pmic_bxtwc.h>
 #include <linux/module.h>
 
-#include <asm/intel_pmc_ipc.h>
+#include <asm/intel_scu_ipc.h>
 
 /* PMIC device registers */
 #define REG_ADDR_MASK		0xFF00
@@ -58,6 +58,10 @@
 /* Whiskey Cove PMIC share same ACPI ID between different platforms */
 #define BROXTON_PMIC_WC_HRV	4
 
+#define PMC_PMIC_ACCESS		0xFF
+#define PMC_PMIC_READ		0x0
+#define PMC_PMIC_WRITE		0x1
+
 enum bxtwc_irqs {
 	BXTWC_PWRBTN_LVL1_IRQ = 0,
 	BXTWC_TMU_LVL1_IRQ,
@@ -288,13 +292,12 @@ static int regmap_ipc_byte_reg_read(void *context, unsigned int reg,
 
 	ipc_in[0] = reg;
 	ipc_in[1] = i2c_addr;
-	ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
-			PMC_IPC_PMIC_ACCESS_READ,
-			ipc_in, sizeof(ipc_in), (u32 *)ipc_out, 1);
-	if (ret) {
-		dev_err(pmic->dev, "Failed to read from PMIC\n");
+	ret = intel_scu_ipc_dev_command(pmic->scu, PMC_PMIC_ACCESS,
+					PMC_PMIC_READ, ipc_in, sizeof(ipc_in),
+					ipc_out, sizeof(ipc_out));
+	if (ret)
 		return ret;
-	}
+
 	*val = ipc_out[0];
 
 	return 0;
@@ -303,7 +306,6 @@ static int regmap_ipc_byte_reg_read(void *context, unsigned int reg,
 static int regmap_ipc_byte_reg_write(void *context, unsigned int reg,
 				       unsigned int val)
 {
-	int ret;
 	int i2c_addr;
 	u8 ipc_in[3];
 	struct intel_soc_pmic *pmic = context;
@@ -321,15 +323,9 @@ static int regmap_ipc_byte_reg_write(void *context, unsigned int reg,
 	ipc_in[0] = reg;
 	ipc_in[1] = i2c_addr;
 	ipc_in[2] = val;
-	ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
-			PMC_IPC_PMIC_ACCESS_WRITE,
-			ipc_in, sizeof(ipc_in), NULL, 0);
-	if (ret) {
-		dev_err(pmic->dev, "Failed to write to PMIC\n");
-		return ret;
-	}
-
-	return 0;
+	return intel_scu_ipc_dev_command(pmic->scu, PMC_PMIC_ACCESS,
+					 PMC_PMIC_WRITE, ipc_in, sizeof(ipc_in),
+					 NULL, 0);
 }
 
 /* sysfs interfaces to r/w PMIC registers, required by initial script */
@@ -457,6 +453,10 @@ static int bxtwc_probe(struct platform_device *pdev)
 	dev_set_drvdata(&pdev->dev, pmic);
 	pmic->dev = &pdev->dev;
 
+	pmic->scu = devm_intel_scu_ipc_dev_get(&pdev->dev);
+	if (!pmic->scu)
+		return -EPROBE_DEFER;
+
 	pmic->regmap = devm_regmap_init(&pdev->dev, NULL, pmic,
 					&bxtwc_regmap_config);
 	if (IS_ERR(pmic->regmap)) {
diff --git a/drivers/mfd/intel_soc_pmic_mrfld.c b/drivers/mfd/intel_soc_pmic_mrfld.c
index 26a1551c5faf..bd94c989d232 100644
--- a/drivers/mfd/intel_soc_pmic_mrfld.c
+++ b/drivers/mfd/intel_soc_pmic_mrfld.c
@@ -74,10 +74,11 @@ static const struct mfd_cell bcove_dev[] = {
 static int bcove_ipc_byte_reg_read(void *context, unsigned int reg,
 				    unsigned int *val)
 {
+	struct intel_soc_pmic *pmic = context;
 	u8 ipc_out;
 	int ret;
 
-	ret = intel_scu_ipc_ioread8(reg, &ipc_out);
+	ret = intel_scu_ipc_dev_ioread8(pmic->scu, reg, &ipc_out);
 	if (ret)
 		return ret;
 
@@ -88,10 +89,11 @@ static int bcove_ipc_byte_reg_read(void *context, unsigned int reg,
 static int bcove_ipc_byte_reg_write(void *context, unsigned int reg,
 				     unsigned int val)
 {
+	struct intel_soc_pmic *pmic = context;
 	u8 ipc_in = val;
 	int ret;
 
-	ret = intel_scu_ipc_iowrite8(reg, ipc_in);
+	ret = intel_scu_ipc_dev_iowrite8(pmic->scu, reg, ipc_in);
 	if (ret)
 		return ret;
 
@@ -117,6 +119,10 @@ static int bcove_probe(struct platform_device *pdev)
 	if (!pmic)
 		return -ENOMEM;
 
+	pmic->scu = devm_intel_scu_ipc_dev_get(dev);
+	if (!pmic->scu)
+		return -ENOMEM;
+
 	platform_set_drvdata(pdev, pmic);
 	pmic->dev = &pdev->dev;
 
diff --git a/drivers/misc/cardreader/rts5261.c b/drivers/misc/cardreader/rts5261.c
index 78c3b1d424c3..4ed86122eaec 100644
--- a/drivers/misc/cardreader/rts5261.c
+++ b/drivers/misc/cardreader/rts5261.c
@@ -639,8 +639,13 @@ int rts5261_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 
 	if (initial_mode) {
 		/* We use 250k(around) here, in initial stage */
-		clk_divider = SD_CLK_DIVIDE_128;
-		card_clock = 30000000;
+		if (is_version(pcr, PID_5261, IC_VER_D)) {
+			clk_divider = SD_CLK_DIVIDE_256;
+			card_clock = 60000000;
+		} else {
+			clk_divider = SD_CLK_DIVIDE_128;
+			card_clock = 30000000;
+		}
 	} else {
 		clk_divider = SD_CLK_DIVIDE_0;
 	}
diff --git a/drivers/misc/lkdtm/bugs.c b/drivers/misc/lkdtm/bugs.c
index 886459e0ddd9..736675f0a246 100644
--- a/drivers/misc/lkdtm/bugs.c
+++ b/drivers/misc/lkdtm/bugs.c
@@ -208,7 +208,7 @@ void lkdtm_OVERFLOW_UNSIGNED(void)
 	ignored = value;
 }
 
-/* Intentially using old-style flex array definition of 1 byte. */
+/* Intentionally using old-style flex array definition of 1 byte. */
 struct array_bounds_flex_array {
 	int one;
 	int two;
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 0c390fe421ad..34391b477dc8 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -241,7 +241,7 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * MEI requires to resume from runtime suspend mode
 	 * in order to perform link reset flow upon system suspend.
 	 */
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	/*
 	 * ME maps runtime suspend/resume to D0i states,
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index beacf2a2f2b5..4bf26ce61044 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -128,7 +128,7 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * MEI requires to resume from runtime suspend mode
 	 * in order to perform link reset flow upon system suspend.
 	 */
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	/*
 	 * TXE maps runtime suspend/resume to own power gating states,
diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
index 3bfe72c59864..8f201d019f5a 100644
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@@ -116,7 +116,7 @@ config MIC_COSM
 
 config VOP
 	tristate "VOP Driver"
-	depends on VOP_BUS && VHOST_DPN
+	depends on VOP_BUS
 	select VHOST_RING
 	select VIRTIO
 	help
diff --git a/drivers/misc/mic/scif/scif_nodeqp.c b/drivers/misc/mic/scif/scif_nodeqp.c
index fcd999f50d14..ea084626fe11 100644
--- a/drivers/misc/mic/scif/scif_nodeqp.c
+++ b/drivers/misc/mic/scif/scif_nodeqp.c
@@ -660,7 +660,7 @@ int scif_nodeqp_send(struct scif_dev *scifdev, struct scifmsg *msg)
 	struct device *spdev = NULL;
 
 	if (msg->uop > SCIF_EXIT_ACK) {
-		/* Dont send messages once the exit flow has begun */
+		/* Don't send messages once the exit flow has begun */
 		if (OP_IDLE != scifdev->exit)
 			return -ENODEV;
 		spdev = scif_get_peer_dev(scifdev);
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 79a963105983..d5e097cd556d 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -59,16 +59,16 @@
 
 /* define two XPC debug device structures to be used with dev_dbg() et al */
 
-struct device_driver xpc_dbg_name = {
+static struct device_driver xpc_dbg_name = {
 	.name = "xpc"
 };
 
-struct device xpc_part_dbg_subname = {
+static struct device xpc_part_dbg_subname = {
 	.init_name = "",	/* set to "part" at xpc_init() time */
 	.driver = &xpc_dbg_name
 };
 
-struct device xpc_chan_dbg_subname = {
+static struct device xpc_chan_dbg_subname = {
 	.init_name = "",	/* set to "chan" at xpc_init() time */
 	.driver = &xpc_dbg_name
 };
@@ -1217,7 +1217,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *_die_args)
 	return NOTIFY_DONE;
 }
 
-int __init
+static int __init
 xpc_init(void)
 {
 	int ret;
@@ -1319,7 +1319,7 @@ xpc_init(void)
 
 module_init(xpc_init);
 
-void __exit
+static void __exit
 xpc_exit(void)
 {
 	xpc_do_exit(xpUnloading);
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index ada94e6a3c91..837d6c3fe69c 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -96,7 +96,7 @@ struct xpnet_pending_msg {
 	atomic_t use_count;
 };
 
-struct net_device *xpnet_device;
+static struct net_device *xpnet_device;
 
 /*
  * When we are notified of other partitions activating, we add them to
@@ -131,16 +131,16 @@ static DEFINE_SPINLOCK(xpnet_broadcast_lock);
 
 /* Define the XPNET debug device structures to be used with dev_dbg() et al */
 
-struct device_driver xpnet_dbg_name = {
+static struct device_driver xpnet_dbg_name = {
 	.name = "xpnet"
 };
 
-struct device xpnet_dbg_subname = {
+static struct device xpnet_dbg_subname = {
 	.init_name = "",	/* set to "" */
 	.driver = &xpnet_dbg_name
 };
 
-struct device *xpnet = &xpnet_dbg_subname;
+static struct device *xpnet = &xpnet_dbg_subname;
 
 /*
  * Packet was recevied by XPC and forwarded to us.
diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
index 71bbaa56bdb5..7a7589417e87 100644
--- a/drivers/misc/xilinx_sdfec.c
+++ b/drivers/misc/xilinx_sdfec.c
@@ -649,14 +649,9 @@ static int xsdfec_add_ldpc(struct xsdfec_dev *xsdfec, void __user *arg)
 	struct xsdfec_ldpc_params *ldpc;
 	int ret, n;
 
-	ldpc = kzalloc(sizeof(*ldpc), GFP_KERNEL);
-	if (!ldpc)
-		return -ENOMEM;
-
-	if (copy_from_user(ldpc, arg, sizeof(*ldpc))) {
-		ret = -EFAULT;
-		goto err_out;
-	}
+	ldpc = memdup_user(arg, sizeof(*ldpc));
+	if (IS_ERR(ldpc))
+		return PTR_ERR(ldpc);
 
 	if (xsdfec->config.code == XSDFEC_TURBO_CODE) {
 		ret = -EIO;
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 09e0c7659469..9ec84c86c46a 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -219,7 +219,7 @@ static int mmc_clock_opt_set(void *data, u64 val)
 	return 0;
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set,
+DEFINE_DEBUGFS_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set,
 	"%llu\n");
 
 void mmc_add_host_debugfs(struct mmc_host *host)
@@ -232,8 +232,8 @@ void mmc_add_host_debugfs(struct mmc_host *host)
 	debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops);
 	debugfs_create_x32("caps", S_IRUSR, root, &host->caps);
 	debugfs_create_x32("caps2", S_IRUSR, root, &host->caps2);
-	debugfs_create_file("clock", S_IRUSR | S_IWUSR, root, host,
-			    &mmc_clock_fops);
+	debugfs_create_file_unsafe("clock", S_IRUSR | S_IWUSR, root, host,
+				   &mmc_clock_fops);
 
 #ifdef CONFIG_FAIL_MMC_REQUEST
 	if (fail_request)
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 5bd0ab8b236a..baa6314f69b4 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -878,7 +878,7 @@ static int mmc_send_hpi_cmd(struct mmc_card *card)
  *	Issued High Priority Interrupt, and check for card status
  *	until out-of prg-state.
  */
-int mmc_interrupt_hpi(struct mmc_card *card)
+static int mmc_interrupt_hpi(struct mmc_card *card)
 {
 	int err;
 	u32 status;
diff --git a/drivers/mmc/core/regulator.c b/drivers/mmc/core/regulator.c
index b6febbcf8978..96b1d15045d6 100644
--- a/drivers/mmc/core/regulator.c
+++ b/drivers/mmc/core/regulator.c
@@ -136,6 +136,8 @@ static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator,
 						  int min_uV, int target_uV,
 						  int max_uV)
 {
+	int current_uV;
+
 	/*
 	 * Check if supported first to avoid errors since we may try several
 	 * signal levels during power up and don't want to show errors.
@@ -143,6 +145,14 @@ static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator,
 	if (!regulator_is_supported_voltage(regulator, min_uV, max_uV))
 		return -EINVAL;
 
+	/*
+	 * The voltage is already set, no need to switch.
+	 * Return 1 to indicate that no switch happened.
+	 */
+	current_uV = regulator_get_voltage(regulator);
+	if (current_uV == target_uV)
+		return 1;
+
 	return regulator_set_voltage_triplet(regulator, min_uV, target_uV,
 					     max_uV);
 }
@@ -198,9 +208,10 @@ int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
 		 * voltage in two steps and try to stay close to vmmc
 		 * with a 0.3V tolerance at first.
 		 */
-		if (!mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
-						min_uV, volt, max_uV))
-			return 0;
+		ret = mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
+							min_uV, volt, max_uV);
+		if (ret >= 0)
+			return ret;
 
 		return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
 						2700000, volt, 3600000);
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 76c7add367d5..43de3190d718 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -376,11 +376,11 @@ int mmc_sd_switch_hs(struct mmc_card *card)
 	if (!status)
 		return -ENOMEM;
 
-	err = mmc_sd_switch(card, 1, 0, 1, status);
+	err = mmc_sd_switch(card, 1, 0, HIGH_SPEED_BUS_SPEED, status);
 	if (err)
 		goto out;
 
-	if ((status[16] & 0xF) != 1) {
+	if ((status[16] & 0xF) != HIGH_SPEED_BUS_SPEED) {
 		pr_warn("%s: Problem switching card into high-speed mode!\n",
 			mmc_hostname(card->host));
 		err = 0;
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 462b5352fea7..2aee844722d6 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -171,7 +171,7 @@ config MMC_SDHCI_OF_ASPEED
 config MMC_SDHCI_OF_AT91
 	tristate "SDHCI OF support for the Atmel SDMMC controller"
 	depends on MMC_SDHCI_PLTFM
-	depends on OF
+	depends on OF && HAVE_CLK
 	help
 	  This selects the Atmel SDMMC driver
 
diff --git a/drivers/mmc/host/android-goldfish.c b/drivers/mmc/host/android-goldfish.c
index 914e17bab3be..ceb4924e02d0 100644
--- a/drivers/mmc/host/android-goldfish.c
+++ b/drivers/mmc/host/android-goldfish.c
@@ -27,7 +27,6 @@
 #include <linux/mutex.h>
 #include <linux/scatterlist.h>
 #include <linux/mmc/mmc.h>
-#include <linux/mmc/sdio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 
@@ -404,14 +403,6 @@ static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
 	host->mrq = req;
 	goldfish_mmc_prepare_data(host, req);
 	goldfish_mmc_start_command(host, req->cmd);
-
-	/*
-	 * This is to avoid accidentally being detected as an SDIO card
-	 * in mmc_attach_sdio().
-	 */
-	if (req->cmd->opcode == SD_IO_SEND_OP_COND &&
-	    req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR))
-		req->cmd->error = -EINVAL;
 }
 
 static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
@@ -482,6 +473,7 @@ static int goldfish_mmc_probe(struct platform_device *pdev)
 	mmc->f_max = 24000000;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 	mmc->caps = MMC_CAP_4_BIT_DATA;
+	mmc->caps2 = MMC_CAP2_NO_SDIO;
 
 	/* Use scatterlist DMA to reduce per-transfer costs.
 	 * NOTE max_seg_size assumption that small blocks aren't
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index aeaaa5314924..5cb692687698 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -169,6 +169,7 @@
 #define	atmci_writel(port, reg, value)			\
 	__raw_writel((value), (port)->regs + reg)
 
+#define ATMCI_CMD_TIMEOUT_MS	2000
 #define AUTOSUSPEND_DELAY	50
 
 #define ATMCI_DATA_ERROR_FLAGS	(ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
@@ -808,6 +809,9 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
 static void atmci_send_command(struct atmel_mci *host,
 		struct mmc_command *cmd, u32 cmd_flags)
 {
+	unsigned int timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+		ATMCI_CMD_TIMEOUT_MS;
+
 	WARN_ON(host->cmd);
 	host->cmd = cmd;
 
@@ -817,6 +821,8 @@ static void atmci_send_command(struct atmel_mci *host,
 
 	atmci_writel(host, ATMCI_ARGR, cmd->arg);
 	atmci_writel(host, ATMCI_CMDR, cmd_flags);
+
+	mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout_ms));
 }
 
 static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
@@ -1314,8 +1320,6 @@ static void atmci_start_request(struct atmel_mci *host,
 	 * prepared yet.)
 	 */
 	atmci_writel(host, ATMCI_IER, iflags);
-
-	mod_timer(&host->timer, jiffies +  msecs_to_jiffies(2000));
 }
 
 static void atmci_queue_request(struct atmel_mci *host,
@@ -1557,6 +1561,8 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
 
 	WARN_ON(host->cmd || host->data);
 
+	del_timer(&host->timer);
+
 	/*
 	 * Update the MMC clock rate if necessary. This may be
 	 * necessary if set_ios() is called when a different slot is
@@ -1583,8 +1589,6 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
 		host->state = STATE_IDLE;
 	}
 
-	del_timer(&host->timer);
-
 	spin_unlock(&host->lock);
 	mmc_request_done(prev_mmc, mrq);
 	spin_lock(&host->lock);
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 8823680ca42c..9bb1910268ca 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -259,7 +259,7 @@ static void au1xmmc_tasklet_finish(unsigned long param)
 	au1xmmc_finish_request(host);
 }
 
-static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
+static int au1xmmc_send_command(struct au1xmmc_host *host,
 				struct mmc_command *cmd, struct mmc_data *data)
 {
 	u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
@@ -302,9 +302,6 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
 	__raw_writel(cmd->arg, HOST_CMDARG(host));
 	wmb(); /* drain writebuffer */
 
-	if (wait)
-		IRQ_OFF(host, SD_CONFIG_CR);
-
 	__raw_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
 	wmb(); /* drain writebuffer */
 
@@ -312,19 +309,6 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
 	while (__raw_readl(HOST_CMD(host)) & SD_CMD_GO)
 		/* nop */;
 
-	/* Wait for the command to come back */
-	if (wait) {
-		u32 status = __raw_readl(HOST_STATUS(host));
-
-		while (!(status & SD_STATUS_CR))
-			status = __raw_readl(HOST_STATUS(host));
-
-		/* Clear the CR status */
-		__raw_writel(SD_STATUS_CR, HOST_STATUS(host));
-
-		IRQ_ON(host, SD_CONFIG_CR);
-	}
-
 	return 0;
 }
 
@@ -711,7 +695,7 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
 	}
 
 	if (!ret)
-		ret = au1xmmc_send_command(host, 0, mrq->cmd, mrq->data);
+		ret = au1xmmc_send_command(host, mrq->cmd, mrq->data);
 
 	if (ret) {
 		mrq->cmd->error = ret;
diff --git a/drivers/mmc/host/cqhci.c b/drivers/mmc/host/cqhci.c
index c2239ee2c0ef..75934f3c117e 100644
--- a/drivers/mmc/host/cqhci.c
+++ b/drivers/mmc/host/cqhci.c
@@ -5,6 +5,7 @@
 #include <linux/delay.h>
 #include <linux/highmem.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
@@ -349,12 +350,16 @@ static int cqhci_enable(struct mmc_host *mmc, struct mmc_card *card)
 /* CQHCI is idle and should halt immediately, so set a small timeout */
 #define CQHCI_OFF_TIMEOUT 100
 
+static u32 cqhci_read_ctl(struct cqhci_host *cq_host)
+{
+	return cqhci_readl(cq_host, CQHCI_CTL);
+}
+
 static void cqhci_off(struct mmc_host *mmc)
 {
 	struct cqhci_host *cq_host = mmc->cqe_private;
-	ktime_t timeout;
-	bool timed_out;
 	u32 reg;
+	int err;
 
 	if (!cq_host->enabled || !mmc->cqe_on || cq_host->recovery_halt)
 		return;
@@ -364,15 +369,9 @@ static void cqhci_off(struct mmc_host *mmc)
 
 	cqhci_writel(cq_host, CQHCI_HALT, CQHCI_CTL);
 
-	timeout = ktime_add_us(ktime_get(), CQHCI_OFF_TIMEOUT);
-	while (1) {
-		timed_out = ktime_compare(ktime_get(), timeout) > 0;
-		reg = cqhci_readl(cq_host, CQHCI_CTL);
-		if ((reg & CQHCI_HALT) || timed_out)
-			break;
-	}
-
-	if (timed_out)
+	err = readx_poll_timeout(cqhci_read_ctl, cq_host, reg,
+				 reg & CQHCI_HALT, 0, CQHCI_OFF_TIMEOUT);
+	if (err < 0)
 		pr_err("%s: cqhci: CQE stuck on\n", mmc_hostname(mmc));
 	else
 		pr_debug("%s: cqhci: CQE off\n", mmc_hostname(mmc));
diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c
index 23b6f65b3785..50977ff18074 100644
--- a/drivers/mmc/host/dw_mmc-k3.c
+++ b/drivers/mmc/host/dw_mmc-k3.c
@@ -424,7 +424,7 @@ static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
 
 	if (!IS_ERR(mmc->supply.vqmmc)) {
 		ret = mmc_regulator_set_vqmmc(mmc, ios);
-		if (ret) {
+		if (ret < 0) {
 			dev_err(host->dev, "Regulator set error %d\n", ret);
 			return ret;
 		}
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index bc5278ab5707..5d1f8a3ec3a5 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1546,8 +1546,7 @@ static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	if (!IS_ERR(mmc->supply.vqmmc)) {
 		ret = mmc_regulator_set_vqmmc(mmc, ios);
-
-		if (ret) {
+		if (ret < 0) {
 			dev_dbg(&mmc->class_dev,
 					 "Regulator set error %d - %s V\n",
 					 ret, uhs & v18 ? "1.8" : "3.3");
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 35400cf2a2e4..7eb38d7482c6 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -1004,6 +1004,8 @@ static int meson_mmc_card_busy(struct mmc_host *mmc)
 
 static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 {
+	int ret;
+
 	/* vqmmc regulator is available */
 	if (!IS_ERR(mmc->supply.vqmmc)) {
 		/*
@@ -1013,7 +1015,8 @@ static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 		 * to 1.8v. Please make sure the regulator framework is aware
 		 * of your own regulator constraints
 		 */
-		return mmc_regulator_set_vqmmc(mmc, ios);
+		ret = mmc_regulator_set_vqmmc(mmc, ios);
+		return ret < 0 ? ret : 0;
 	}
 
 	/* no vqmmc regulator, assume fixed regulator at 3/3.3V */
diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index 8b038e7b2cd3..2e58743d83bb 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -357,14 +357,6 @@ static void meson_mx_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		meson_mx_mmc_start_cmd(mmc, mrq->cmd);
 }
 
-static int meson_mx_mmc_card_busy(struct mmc_host *mmc)
-{
-	struct meson_mx_mmc_host *host = mmc_priv(mmc);
-	u32 irqc = readl(host->base + MESON_MX_SDIO_IRQC);
-
-	return !!(irqc & MESON_MX_SDIO_IRQC_FORCE_DATA_DAT_MASK);
-}
-
 static void meson_mx_mmc_read_response(struct mmc_host *mmc,
 				       struct mmc_command *cmd)
 {
@@ -506,7 +498,6 @@ static void meson_mx_mmc_timeout(struct timer_list *t)
 static struct mmc_host_ops meson_mx_mmc_ops = {
 	.request		= meson_mx_mmc_request,
 	.set_ios		= meson_mx_mmc_set_ios,
-	.card_busy		= meson_mx_mmc_card_busy,
 	.get_cd			= mmc_gpio_get_cd,
 	.get_ro			= mmc_gpio_get_ro,
 };
@@ -570,7 +561,7 @@ static int meson_mx_mmc_add_host(struct meson_mx_mmc_host *host)
 	mmc->f_max = clk_round_rate(host->cfg_div_clk,
 				    clk_get_rate(host->parent_clk));
 
-	mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
+	mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY;
 	mmc->ops = &meson_mx_mmc_ops;
 
 	ret = mmc_of_parse(mmc);
diff --git a/drivers/mmc/host/mmc_hsq.c b/drivers/mmc/host/mmc_hsq.c
index b90b2c97b6cf..a5e05ed0fda3 100644
--- a/drivers/mmc/host/mmc_hsq.c
+++ b/drivers/mmc/host/mmc_hsq.c
@@ -16,11 +16,20 @@
 #define HSQ_NUM_SLOTS	64
 #define HSQ_INVALID_TAG	HSQ_NUM_SLOTS
 
+static void mmc_hsq_retry_handler(struct work_struct *work)
+{
+	struct mmc_hsq *hsq = container_of(work, struct mmc_hsq, retry_work);
+	struct mmc_host *mmc = hsq->mmc;
+
+	mmc->ops->request(mmc, hsq->mrq);
+}
+
 static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)
 {
 	struct mmc_host *mmc = hsq->mmc;
 	struct hsq_slot *slot;
 	unsigned long flags;
+	int ret = 0;
 
 	spin_lock_irqsave(&hsq->lock, flags);
 
@@ -42,7 +51,24 @@ static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)
 
 	spin_unlock_irqrestore(&hsq->lock, flags);
 
-	mmc->ops->request(mmc, hsq->mrq);
+	if (mmc->ops->request_atomic)
+		ret = mmc->ops->request_atomic(mmc, hsq->mrq);
+	else
+		mmc->ops->request(mmc, hsq->mrq);
+
+	/*
+	 * If returning BUSY from request_atomic(), which means the card
+	 * may be busy now, and we should change to non-atomic context to
+	 * try again for this unusual case, to avoid time-consuming operations
+	 * in the atomic context.
+	 *
+	 * Note: we just give a warning for other error cases, since the host
+	 * driver will handle them.
+	 */
+	if (ret == -EBUSY)
+		schedule_work(&hsq->retry_work);
+	else
+		WARN_ON_ONCE(ret);
 }
 
 static void mmc_hsq_update_next_tag(struct mmc_hsq *hsq, int remains)
@@ -325,6 +351,7 @@ int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc)
 	hsq->mmc->cqe_private = hsq;
 	mmc->cqe_ops = &mmc_hsq_ops;
 
+	INIT_WORK(&hsq->retry_work, mmc_hsq_retry_handler);
 	spin_lock_init(&hsq->lock);
 	init_waitqueue_head(&hsq->wait_queue);
 
diff --git a/drivers/mmc/host/mmc_hsq.h b/drivers/mmc/host/mmc_hsq.h
index 18b9cf55925f..ffdd9cd172c3 100644
--- a/drivers/mmc/host/mmc_hsq.h
+++ b/drivers/mmc/host/mmc_hsq.h
@@ -12,6 +12,7 @@ struct mmc_hsq {
 	wait_queue_head_t wait_queue;
 	struct hsq_slot *slot;
 	spinlock_t lock;
+	struct work_struct retry_work;
 
 	int next_tag;
 	int num_slots;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 647567def612..a69d6a0c2e15 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1861,31 +1861,17 @@ static int mmci_get_cd(struct mmc_host *mmc)
 static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct mmci_host *host = mmc_priv(mmc);
-	int ret = 0;
-
-	if (!IS_ERR(mmc->supply.vqmmc)) {
+	int ret;
 
-		switch (ios->signal_voltage) {
-		case MMC_SIGNAL_VOLTAGE_330:
-			ret = regulator_set_voltage(mmc->supply.vqmmc,
-						2700000, 3600000);
-			break;
-		case MMC_SIGNAL_VOLTAGE_180:
-			ret = regulator_set_voltage(mmc->supply.vqmmc,
-						1700000, 1950000);
-			break;
-		case MMC_SIGNAL_VOLTAGE_120:
-			ret = regulator_set_voltage(mmc->supply.vqmmc,
-						1100000, 1300000);
-			break;
-		}
+	ret = mmc_regulator_set_vqmmc(mmc, ios);
 
-		if (!ret && host->ops && host->ops->post_sig_volt_switch)
-			ret = host->ops->post_sig_volt_switch(host, ios);
+	if (!ret && host->ops && host->ops->post_sig_volt_switch)
+		ret = host->ops->post_sig_volt_switch(host, ios);
+	else if (ret)
+		ret = 0;
 
-		if (ret)
-			dev_warn(mmc_dev(mmc), "Voltage switch failed\n");
-	}
+	if (ret < 0)
+		dev_warn(mmc_dev(mmc), "Voltage switch failed\n");
 
 	return ret;
 }
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index d33e62bd6153..14f99d8aa3f0 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -519,6 +519,7 @@ void sdmmc_variant_init(struct mmci_host *host)
 	struct sdmmc_dlyb *dlyb;
 
 	host->ops = &sdmmc_variant_ops;
+	host->pwr_reg = readl_relaxed(host->base + MMCIPOWER);
 
 	base_dlyb = devm_of_iomap(mmc_dev(host->mmc), np, 1, NULL);
 	if (IS_ERR(base_dlyb))
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index b221c02cc71f..53819ae9f271 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1369,7 +1369,7 @@ static void msdc_set_buswidth(struct msdc_host *host, u32 width)
 static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct msdc_host *host = mmc_priv(mmc);
-	int ret = 0;
+	int ret;
 
 	if (!IS_ERR(mmc->supply.vqmmc)) {
 		if (ios->signal_voltage != MMC_SIGNAL_VOLTAGE_330 &&
@@ -1379,18 +1379,19 @@ static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
 		}
 
 		ret = mmc_regulator_set_vqmmc(mmc, ios);
-		if (ret) {
+		if (ret < 0) {
 			dev_dbg(host->dev, "Regulator set error %d (%d)\n",
 				ret, ios->signal_voltage);
-		} else {
-			/* Apply different pinctrl settings for different signal voltage */
-			if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
-				pinctrl_select_state(host->pinctrl, host->pins_uhs);
-			else
-				pinctrl_select_state(host->pinctrl, host->pins_default);
+			return ret;
 		}
+
+		/* Apply different pinctrl settings for different signal voltage */
+		if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
+			pinctrl_select_state(host->pinctrl, host->pins_uhs);
+		else
+			pinctrl_select_state(host->pinctrl, host->pins_default);
 	}
-	return ret;
+	return 0;
 }
 
 static int msdc_card_busy(struct mmc_host *mmc)
diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h
index 2a4c83a5f32e..86efa9d5cd6d 100644
--- a/drivers/mmc/host/renesas_sdhi.h
+++ b/drivers/mmc/host/renesas_sdhi.h
@@ -61,8 +61,10 @@ struct renesas_sdhi {
 
 	/* Tuning values: 1 for success, 0 for failure */
 	DECLARE_BITMAP(taps, BITS_PER_LONG);
+	/* Sampling data comparison: 1 for match, 0 for mismatch */
+	DECLARE_BITMAP(smpcmp, BITS_PER_LONG);
 	unsigned int tap_num;
-	unsigned long tap_set;
+	unsigned int tap_set;
 };
 
 #define host_to_priv(host) \
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index df826661366f..28b0830c4251 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -237,7 +237,7 @@ static int renesas_sdhi_start_signal_voltage_switch(struct mmc_host *mmc,
 			MMC_SIGNAL_VOLTAGE_330 ? 0 : -EINVAL;
 
 	ret = mmc_regulator_set_vqmmc(host->mmc, ios);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	return pinctrl_select_state(priv->pinctrl, pin_state);
@@ -422,20 +422,16 @@ static int renesas_sdhi_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_io
 	return 0;
 }
 
-#define SH_MOBILE_SDHI_MAX_TAP 3
+#define SH_MOBILE_SDHI_MIN_TAP_ROW 3
 
 static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host)
 {
 	struct renesas_sdhi *priv = host_to_priv(host);
-	unsigned long tap_cnt;  /* counter of tuning success */
-	unsigned long tap_start;/* start position of tuning success */
-	unsigned long tap_end;  /* end position of tuning success */
-	unsigned long ntap;     /* temporary counter of tuning success */
-	unsigned long i;
+	unsigned int tap_start = 0, tap_end = 0, tap_cnt = 0, rs, re, i;
+	unsigned int taps_size = priv->tap_num * 2, min_tap_row;
+	unsigned long *bitmap;
 
 	priv->doing_tune = false;
-
-	/* Clear SCC_RVSREQ */
 	sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
 
 	/*
@@ -443,42 +439,42 @@ static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host)
 	 * result requiring the tap to be good in both runs before
 	 * considering it for tuning selection.
 	 */
-	for (i = 0; i < priv->tap_num * 2; i++) {
+	for (i = 0; i < taps_size; i++) {
 		int offset = priv->tap_num * (i < priv->tap_num ? 1 : -1);
 
 		if (!test_bit(i, priv->taps))
 			clear_bit(i + offset, priv->taps);
+
+		if (!test_bit(i, priv->smpcmp))
+			clear_bit(i + offset, priv->smpcmp);
 	}
 
 	/*
-	 * Find the longest consecutive run of successful probes.  If that
-	 * is more than SH_MOBILE_SDHI_MAX_TAP probes long then use the
-	 * center index as the tap.
+	 * If all TAP are OK, the sampling clock position is selected by
+	 * identifying the change point of data.
 	 */
-	tap_cnt = 0;
-	ntap = 0;
-	tap_start = 0;
-	tap_end = 0;
-	for (i = 0; i < priv->tap_num * 2; i++) {
-		if (test_bit(i, priv->taps)) {
-			ntap++;
-		} else {
-			if (ntap > tap_cnt) {
-				tap_start = i - ntap;
-				tap_end = i - 1;
-				tap_cnt = ntap;
-			}
-			ntap = 0;
-		}
+	if (bitmap_full(priv->taps, taps_size)) {
+		bitmap = priv->smpcmp;
+		min_tap_row = 1;
+	} else {
+		bitmap = priv->taps;
+		min_tap_row = SH_MOBILE_SDHI_MIN_TAP_ROW;
 	}
 
-	if (ntap > tap_cnt) {
-		tap_start = i - ntap;
-		tap_end = i - 1;
-		tap_cnt = ntap;
+	/*
+	 * Find the longest consecutive run of successful probes. If that
+	 * is at least SH_MOBILE_SDHI_MIN_TAP_ROW probes long then use the
+	 * center index as the tap, otherwise bail out.
+	 */
+	bitmap_for_each_set_region(bitmap, rs, re, 0, taps_size) {
+		if (re - rs > tap_cnt) {
+			tap_end = re;
+			tap_start = rs;
+			tap_cnt = tap_end - tap_start;
+		}
 	}
 
-	if (tap_cnt >= SH_MOBILE_SDHI_MAX_TAP)
+	if (tap_cnt >= min_tap_row)
 		priv->tap_set = (tap_start + tap_end) / 2 % priv->tap_num;
 	else
 		return -EIO;
@@ -511,6 +507,7 @@ static int renesas_sdhi_execute_tuning(struct tmio_mmc_host *host, u32 opcode)
 
 	priv->doing_tune = true;
 	bitmap_zero(priv->taps, priv->tap_num * 2);
+	bitmap_zero(priv->smpcmp, priv->tap_num * 2);
 
 	/* Issue CMD19 twice for each tap */
 	for (i = 0; i < 2 * priv->tap_num; i++) {
@@ -519,6 +516,9 @@ static int renesas_sdhi_execute_tuning(struct tmio_mmc_host *host, u32 opcode)
 
 		if (mmc_send_tuning(host->mmc, opcode, NULL) == 0)
 			set_bit(i, priv->taps);
+
+		if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_SMPCMP) == 0)
+			set_bit(i, priv->smpcmp);
 	}
 
 	return renesas_sdhi_select_tuning(host);
@@ -527,7 +527,7 @@ static int renesas_sdhi_execute_tuning(struct tmio_mmc_host *host, u32 opcode)
 static bool renesas_sdhi_manual_correction(struct tmio_mmc_host *host, bool use_4tap)
 {
 	struct renesas_sdhi *priv = host_to_priv(host);
-	unsigned long new_tap = priv->tap_set;
+	unsigned int new_tap = priv->tap_set;
 	u32 val;
 
 	val = sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ);
@@ -933,10 +933,8 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 			goto eirq;
 	}
 
-	dev_info(&pdev->dev, "%s base at 0x%08lx max clock rate %u MHz\n",
-		 mmc_hostname(host->mmc), (unsigned long)
-		 (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start),
-		 host->mmc->f_max / 1000000);
+	dev_info(&pdev->dev, "%s base at %pa, max clock rate %u MHz\n",
+		 mmc_hostname(host->mmc), &res->start, host->mmc->f_max / 1000000);
 
 	return ret;
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 1e616ae56b13..444b2769ae2c 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -958,13 +958,6 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
 {
 	u32 dcon, imsk, stoptries = 3;
 
-	/* write DCON register */
-
-	if (!data) {
-		writel(0, host->base + S3C2410_SDIDCON);
-		return 0;
-	}
-
 	if ((data->blksz & 3) != 0) {
 		/* We cannot deal with unaligned blocks with more than
 		 * one block being transferred. */
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 5ec8e4bf1ac7..38cd83118082 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -8,6 +8,7 @@
  *   Author: Wolfram Sang <kernel@pengutronix.de>
  */
 
+#include <linux/bitfield.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/delay.h>
@@ -399,7 +400,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 				val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104
 					| SDHCI_SUPPORT_SDR50
 					| SDHCI_USE_SDR50_TUNING
-					| (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT);
+					| FIELD_PREP(SDHCI_RETUNING_MODE_MASK,
+						     SDHCI_TUNING_MODE_3);
 
 			if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
 				val |= SDHCI_SUPPORT_HS400;
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 09ff7315eb5e..8a055ddfdaff 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -10,6 +10,7 @@
 #include <linux/delay.h>
 #include <linux/mmc/mmc.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/iopoll.h>
 #include <linux/regulator/consumer.h>
@@ -56,19 +57,19 @@
 #define CORE_FLL_CYCLE_CNT	BIT(18)
 #define CORE_DLL_CLOCK_DISABLE	BIT(21)
 
-#define CORE_VENDOR_SPEC_POR_VAL 0xa1c
+#define CORE_VENDOR_SPEC_POR_VAL 0xa9c
 #define CORE_CLK_PWRSAVE	BIT(1)
 #define CORE_HC_MCLK_SEL_DFLT	(2 << 8)
 #define CORE_HC_MCLK_SEL_HS400	(3 << 8)
 #define CORE_HC_MCLK_SEL_MASK	(3 << 8)
-#define CORE_IO_PAD_PWR_SWITCH_EN	(1 << 15)
-#define CORE_IO_PAD_PWR_SWITCH  (1 << 16)
+#define CORE_IO_PAD_PWR_SWITCH_EN	BIT(15)
+#define CORE_IO_PAD_PWR_SWITCH	BIT(16)
 #define CORE_HC_SELECT_IN_EN	BIT(18)
 #define CORE_HC_SELECT_IN_HS400	(6 << 19)
 #define CORE_HC_SELECT_IN_MASK	(7 << 19)
 
-#define CORE_3_0V_SUPPORT	(1 << 25)
-#define CORE_1_8V_SUPPORT	(1 << 26)
+#define CORE_3_0V_SUPPORT	BIT(25)
+#define CORE_1_8V_SUPPORT	BIT(26)
 #define CORE_VOLT_SUPPORT	(CORE_3_0V_SUPPORT | CORE_1_8V_SUPPORT)
 
 #define CORE_CSR_CDC_CTLR_CFG0		0x130
@@ -243,6 +244,8 @@ struct sdhci_msm_host {
 	struct clk_bulk_data bulk_clks[4]; /* core, iface, cal, sleep clocks */
 	unsigned long clk_rate;
 	struct mmc_host *mmc;
+	struct opp_table *opp;
+	bool opp_table;
 	bool use_14lpp_dll_reset;
 	bool tuning_done;
 	bool calibration_done;
@@ -332,7 +335,7 @@ static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host,
 	int rc;
 
 	clock = msm_get_clock_rate_for_bus_mode(host, clock);
-	rc = clk_set_rate(core_clk, clock);
+	rc = dev_pm_opp_set_rate(mmc_dev(host->mmc), clock);
 	if (rc) {
 		pr_err("%s: Failed to set clock at rate %u at timing %d\n",
 		       mmc_hostname(host->mmc), clock,
@@ -1882,7 +1885,9 @@ static const struct sdhci_ops sdhci_msm_ops = {
 static const struct sdhci_pltfm_data sdhci_msm_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
-		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		  SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
+
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops = &sdhci_msm_ops,
 };
@@ -1962,8 +1967,18 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	}
 	msm_host->bulk_clks[0].clk = clk;
 
+	msm_host->opp = dev_pm_opp_set_clkname(&pdev->dev, "core");
+	if (IS_ERR(msm_host->opp)) {
+		ret = PTR_ERR(msm_host->opp);
+		goto bus_clk_disable;
+	}
+
+	/* OPP table is optional */
+	if (!dev_pm_opp_of_add_table(&pdev->dev))
+		msm_host->opp_table = true;
+
 	/* Vote for maximum clock rate for maximum performance */
-	ret = clk_set_rate(clk, INT_MAX);
+	ret = dev_pm_opp_set_rate(&pdev->dev, INT_MAX);
 	if (ret)
 		dev_warn(&pdev->dev, "core clock boost failed\n");
 
@@ -1980,7 +1995,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
 				      msm_host->bulk_clks);
 	if (ret)
-		goto bus_clk_disable;
+		goto opp_cleanup;
 
 	/*
 	 * xo clock is needed for FLL feature of cm_dll.
@@ -2087,6 +2102,8 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 		goto clk_disable;
 	}
 
+	msm_host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_NEED_RSP_BUSY;
+
 	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
@@ -2115,6 +2132,10 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 clk_disable:
 	clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
 				   msm_host->bulk_clks);
+opp_cleanup:
+	if (msm_host->opp_table)
+		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_put_clkname(msm_host->opp);
 bus_clk_disable:
 	if (!IS_ERR(msm_host->bus_clk))
 		clk_disable_unprepare(msm_host->bus_clk);
@@ -2133,6 +2154,9 @@ static int sdhci_msm_remove(struct platform_device *pdev)
 
 	sdhci_remove_host(host, dead);
 
+	if (msm_host->opp_table)
+		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_put_clkname(msm_host->opp);
 	pm_runtime_get_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
@@ -2151,6 +2175,8 @@ static __maybe_unused int sdhci_msm_runtime_suspend(struct device *dev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
 
+	/* Drop the performance vote */
+	dev_pm_opp_set_rate(dev, 0);
 	clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
 				   msm_host->bulk_clks);
 
@@ -2173,9 +2199,11 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev)
 	 * restore the SDR DLL settings when the clock is ungated.
 	 */
 	if (msm_host->restore_dll_config && msm_host->clk_rate)
-		return sdhci_msm_restore_sdr_dll_config(host);
+		ret = sdhci_msm_restore_sdr_dll_config(host);
 
-	return 0;
+	dev_pm_opp_set_rate(dev, msm_host->clk_rate);
+
+	return ret;
 }
 
 static const struct dev_pm_ops sdhci_msm_pm_ops = {
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index d4905c106c06..18bf0e76b1eb 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -28,15 +28,26 @@
 #include "sdhci-pltfm.h"
 
 #define SDHCI_ARASAN_VENDOR_REGISTER	0x78
+
+#define SDHCI_ARASAN_ITAPDLY_REGISTER	0xF0F8
+#define SDHCI_ARASAN_OTAPDLY_REGISTER	0xF0FC
+
 #define SDHCI_ARASAN_CQE_BASE_ADDR	0x200
 #define VENDOR_ENHANCED_STROBE		BIT(0)
 
 #define PHY_CLK_TOO_SLOW_HZ		400000
 
+#define SDHCI_ITAPDLY_CHGWIN		0x200
+#define SDHCI_ITAPDLY_ENABLE		0x100
+#define SDHCI_OTAPDLY_ENABLE		0x40
+
 /* Default settings for ZynqMP Clock Phases */
 #define ZYNQMP_ICLK_PHASE {0, 63, 63, 0, 63,  0,   0, 183, 54,  0, 0}
 #define ZYNQMP_OCLK_PHASE {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0}
 
+#define VERSAL_ICLK_PHASE {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0}
+#define VERSAL_OCLK_PHASE {0,  60, 48, 0, 48, 72, 90, 36, 60, 90, 0}
+
 /*
  * On some SoCs the syscon area has a feature where the upper 16-bits of
  * each 32-bit register act as a write mask for the lower 16-bits.  This allows
@@ -62,13 +73,13 @@ struct sdhci_arasan_soc_ctl_field {
 /**
  * struct sdhci_arasan_soc_ctl_map - Map in syscon to corecfg registers
  *
- * It's up to the licensee of the Arsan IP block to make these available
- * somewhere if needed.  Presumably these will be scattered somewhere that's
- * accessible via the syscon API.
- *
  * @baseclkfreq:	Where to find corecfg_baseclkfreq
  * @clockmultiplier:	Where to find corecfg_clockmultiplier
  * @hiword_update:	If true, use HIWORD_UPDATE to access the syscon
+ *
+ * It's up to the licensee of the Arsan IP block to make these available
+ * somewhere if needed.  Presumably these will be scattered somewhere that's
+ * accessible via the syscon API.
  */
 struct sdhci_arasan_soc_ctl_map {
 	struct sdhci_arasan_soc_ctl_field	baseclkfreq;
@@ -77,7 +88,19 @@ struct sdhci_arasan_soc_ctl_map {
 };
 
 /**
- * struct sdhci_arasan_clk_data
+ * struct sdhci_arasan_clk_ops - Clock Operations for Arasan SD controller
+ *
+ * @sdcardclk_ops:	The output clock related operations
+ * @sampleclk_ops:	The sample clock related operations
+ */
+struct sdhci_arasan_clk_ops {
+	const struct clk_ops *sdcardclk_ops;
+	const struct clk_ops *sampleclk_ops;
+};
+
+/**
+ * struct sdhci_arasan_clk_data - Arasan Controller Clock Data.
+ *
  * @sdcardclk_hw:	Struct for the clock we might provide to a PHY.
  * @sdcardclk:		Pointer to normal 'struct clock' for sdcardclk_hw.
  * @sampleclk_hw:	Struct for the clock we might provide to a PHY.
@@ -103,14 +126,18 @@ struct sdhci_arasan_zynqmp_clk_data {
 };
 
 /**
- * struct sdhci_arasan_data
+ * struct sdhci_arasan_data - Arasan Controller Data
+ *
  * @host:		Pointer to the main SDHCI host structure.
  * @clk_ahb:		Pointer to the AHB clock
  * @phy:		Pointer to the generic phy
  * @is_phy_on:		True if the PHY is on; false if not.
+ * @has_cqe:		True if controller has command queuing engine.
  * @clk_data:		Struct for the Arasan Controller Clock Data.
+ * @clk_ops:		Struct for the Arasan Controller Clock Operations.
  * @soc_ctl_base:	Pointer to regmap for syscon for soc_ctl registers.
  * @soc_ctl_map:	Map to get offsets into soc_ctl registers.
+ * @quirks:		Arasan deviations from spec.
  */
 struct sdhci_arasan_data {
 	struct sdhci_host *host;
@@ -120,10 +147,11 @@ struct sdhci_arasan_data {
 
 	bool		has_cqe;
 	struct sdhci_arasan_clk_data clk_data;
+	const struct sdhci_arasan_clk_ops *clk_ops;
 
 	struct regmap	*soc_ctl_base;
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
-	unsigned int	quirks; /* Arasan deviations from spec */
+	unsigned int	quirks;
 
 /* Controller does not have CD wired and will not function normally without */
 #define SDHCI_ARASAN_QUIRK_FORCE_CDTEST	BIT(0)
@@ -135,6 +163,7 @@ struct sdhci_arasan_data {
 struct sdhci_arasan_of_data {
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
 	const struct sdhci_pltfm_data *pdata;
+	const struct sdhci_arasan_clk_ops *clk_ops;
 };
 
 static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = {
@@ -158,14 +187,16 @@ static const struct sdhci_arasan_soc_ctl_map intel_lgm_sdxc_soc_ctl_map = {
 /**
  * sdhci_arasan_syscon_write - Write to a field in soc_ctl registers
  *
+ * @host:	The sdhci_host
+ * @fld:	The field to write to
+ * @val:	The value to write
+ *
  * This function allows writing to fields in sdhci_arasan_soc_ctl_map.
  * Note that if a field is specified as not available (shift < 0) then
  * this function will silently return an error code.  It will be noisy
  * and print errors for any other (unexpected) errors.
  *
- * @host:	The sdhci_host
- * @fld:	The field to write to
- * @val:	The value to write
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_syscon_write(struct sdhci_host *host,
 				   const struct sdhci_arasan_soc_ctl_field *fld,
@@ -335,29 +366,6 @@ static const struct sdhci_ops sdhci_arasan_ops = {
 	.set_power = sdhci_set_power_and_bus_voltage,
 };
 
-static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
-	.ops = &sdhci_arasan_ops,
-	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
-			SDHCI_QUIRK2_STOP_WITH_TC,
-};
-
-static struct sdhci_arasan_of_data sdhci_arasan_data = {
-	.pdata = &sdhci_arasan_pdata,
-};
-
-static const struct sdhci_pltfm_data sdhci_arasan_zynqmp_pdata = {
-	.ops = &sdhci_arasan_ops,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
-			SDHCI_QUIRK2_STOP_WITH_TC,
-};
-
-static struct sdhci_arasan_of_data sdhci_arasan_zynqmp_data = {
-	.pdata = &sdhci_arasan_zynqmp_pdata,
-};
-
 static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32 intmask)
 {
 	int cmd_error = 0;
@@ -414,28 +422,14 @@ static const struct sdhci_pltfm_data sdhci_arasan_cqe_pdata = {
 			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
 };
 
-static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
-	.soc_ctl_map = &rk3399_soc_ctl_map,
-	.pdata = &sdhci_arasan_cqe_pdata,
-};
-
-static struct sdhci_arasan_of_data intel_lgm_emmc_data = {
-	.soc_ctl_map = &intel_lgm_emmc_soc_ctl_map,
-	.pdata = &sdhci_arasan_cqe_pdata,
-};
-
-static struct sdhci_arasan_of_data intel_lgm_sdxc_data = {
-	.soc_ctl_map = &intel_lgm_sdxc_soc_ctl_map,
-	.pdata = &sdhci_arasan_cqe_pdata,
-};
-
 #ifdef CONFIG_PM_SLEEP
 /**
  * sdhci_arasan_suspend - Suspend method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
  *
  * Put the device in a low power state.
+ *
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_suspend(struct device *dev)
 {
@@ -476,9 +470,10 @@ static int sdhci_arasan_suspend(struct device *dev)
 /**
  * sdhci_arasan_resume - Resume method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
  *
  * Resume operation after suspend
+ *
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_resume(struct device *dev)
 {
@@ -524,54 +519,19 @@ static int sdhci_arasan_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
 			 sdhci_arasan_resume);
 
-static const struct of_device_id sdhci_arasan_of_match[] = {
-	/* SoC-specific compatible strings w/ soc_ctl_map */
-	{
-		.compatible = "rockchip,rk3399-sdhci-5.1",
-		.data = &sdhci_arasan_rk3399_data,
-	},
-	{
-		.compatible = "intel,lgm-sdhci-5.1-emmc",
-		.data = &intel_lgm_emmc_data,
-	},
-	{
-		.compatible = "intel,lgm-sdhci-5.1-sdxc",
-		.data = &intel_lgm_sdxc_data,
-	},
-	/* Generic compatible below here */
-	{
-		.compatible = "arasan,sdhci-8.9a",
-		.data = &sdhci_arasan_data,
-	},
-	{
-		.compatible = "arasan,sdhci-5.1",
-		.data = &sdhci_arasan_data,
-	},
-	{
-		.compatible = "arasan,sdhci-4.9a",
-		.data = &sdhci_arasan_data,
-	},
-	{
-		.compatible = "xlnx,zynqmp-8.9a",
-		.data = &sdhci_arasan_zynqmp_data,
-	},
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
-
 /**
  * sdhci_arasan_sdcardclk_recalc_rate - Return the card clock rate
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @parent_rate:		The parent rate (should be rate of clk_xin).
+ *
  * Return the current actual rate of the SD card clock.  This can be used
  * to communicate with out PHY.
  *
- * @hw:			Pointer to the hardware clock structure.
- * @parent_rate		The parent rate (should be rate of clk_xin).
- * Returns the card clock rate.
+ * Return: The card clock rate.
  */
 static unsigned long sdhci_arasan_sdcardclk_recalc_rate(struct clk_hw *hw,
 						      unsigned long parent_rate)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
@@ -589,16 +549,16 @@ static const struct clk_ops arasan_sdcardclk_ops = {
 /**
  * sdhci_arasan_sampleclk_recalc_rate - Return the sampling clock rate
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @parent_rate:		The parent rate (should be rate of clk_xin).
+ *
  * Return the current actual rate of the sampling clock.  This can be used
  * to communicate with out PHY.
  *
- * @hw:			Pointer to the hardware clock structure.
- * @parent_rate		The parent rate (should be rate of clk_xin).
- * Returns the sample clock rate.
+ * Return: The sample clock rate.
  */
 static unsigned long sdhci_arasan_sampleclk_recalc_rate(struct clk_hw *hw,
 						      unsigned long parent_rate)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
@@ -616,14 +576,14 @@ static const struct clk_ops arasan_sampleclk_ops = {
 /**
  * sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Output Clock Tap Delays for Output path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
@@ -688,14 +648,14 @@ static const struct clk_ops zynqmp_sdcardclk_ops = {
 /**
  * sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Input Clock Tap Delays for Input path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sampleclk_set_phase(struct clk_hw *hw, int degrees)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
@@ -757,6 +717,152 @@ static const struct clk_ops zynqmp_sampleclk_ops = {
 	.set_phase = sdhci_zynqmp_sampleclk_set_phase,
 };
 
+/**
+ * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
+ *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
+ * Set the SD Output Clock Tap Delays for Output path
+ *
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct sdhci_arasan_clk_data *clk_data =
+		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
+	struct sdhci_arasan_data *sdhci_arasan =
+		container_of(clk_data, struct sdhci_arasan_data, clk_data);
+	struct sdhci_host *host = sdhci_arasan->host;
+	u8 tap_delay, tap_max = 0;
+
+	/*
+	 * This is applicable for SDHCI_SPEC_300 and above
+	 * Versal does not set phase for <=25MHz clock.
+	 * If degrees is zero, no need to do anything.
+	 */
+	if (host->version < SDHCI_SPEC_300 ||
+	    host->timing == MMC_TIMING_LEGACY ||
+	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+		return 0;
+
+	switch (host->timing) {
+	case MMC_TIMING_MMC_HS:
+	case MMC_TIMING_SD_HS:
+	case MMC_TIMING_UHS_SDR25:
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		/* For 50MHz clock, 30 Taps are available */
+		tap_max = 30;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		/* For 100MHz clock, 15 Taps are available */
+		tap_max = 15;
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+		/* For 200MHz clock, 8 Taps are available */
+		tap_max = 8;
+	default:
+		break;
+	}
+
+	tap_delay = (degrees * tap_max) / 360;
+
+	/* Set the Clock Phase */
+	if (tap_delay) {
+		u32 regval;
+
+		regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
+		regval |= SDHCI_OTAPDLY_ENABLE;
+		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+		regval |= tap_delay;
+		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+	}
+
+	return 0;
+}
+
+static const struct clk_ops versal_sdcardclk_ops = {
+	.recalc_rate = sdhci_arasan_sdcardclk_recalc_rate,
+	.set_phase = sdhci_versal_sdcardclk_set_phase,
+};
+
+/**
+ * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
+ *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
+ * Set the SD Input Clock Tap Delays for Input path
+ *
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct sdhci_arasan_clk_data *clk_data =
+		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
+	struct sdhci_arasan_data *sdhci_arasan =
+		container_of(clk_data, struct sdhci_arasan_data, clk_data);
+	struct sdhci_host *host = sdhci_arasan->host;
+	u8 tap_delay, tap_max = 0;
+
+	/*
+	 * This is applicable for SDHCI_SPEC_300 and above
+	 * Versal does not set phase for <=25MHz clock.
+	 * If degrees is zero, no need to do anything.
+	 */
+	if (host->version < SDHCI_SPEC_300 ||
+	    host->timing == MMC_TIMING_LEGACY ||
+	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+		return 0;
+
+	switch (host->timing) {
+	case MMC_TIMING_MMC_HS:
+	case MMC_TIMING_SD_HS:
+	case MMC_TIMING_UHS_SDR25:
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		/* For 50MHz clock, 120 Taps are available */
+		tap_max = 120;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		/* For 100MHz clock, 60 Taps are available */
+		tap_max = 60;
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+		/* For 200MHz clock, 30 Taps are available */
+		tap_max = 30;
+	default:
+		break;
+	}
+
+	tap_delay = (degrees * tap_max) / 360;
+
+	/* Set the Clock Phase */
+	if (tap_delay) {
+		u32 regval;
+
+		regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval |= SDHCI_ITAPDLY_CHGWIN;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval |= SDHCI_ITAPDLY_ENABLE;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval |= tap_delay;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval &= ~SDHCI_ITAPDLY_CHGWIN;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+	}
+
+	return 0;
+}
+
+static const struct clk_ops versal_sampleclk_ops = {
+	.recalc_rate = sdhci_arasan_sampleclk_recalc_rate,
+	.set_phase = sdhci_versal_sampleclk_set_phase,
+};
+
 static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u32 deviceid)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -804,6 +910,9 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
 /**
  * sdhci_arasan_update_clockmultiplier - Set corecfg_clockmultiplier
  *
+ * @host:		The sdhci_host
+ * @value:		The value to write
+ *
  * The corecfg_clockmultiplier is supposed to contain clock multiplier
  * value of programmable clock generator.
  *
@@ -815,8 +924,6 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
  * - The value of corecfg_clockmultiplier should sync with that of corresponding
  *   value reading from sdhci_capability_register. So this function is called
  *   once at probe time and never called again.
- *
- * @host:		The sdhci_host
  */
 static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
 						u32 value)
@@ -843,6 +950,8 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
 /**
  * sdhci_arasan_update_baseclkfreq - Set corecfg_baseclkfreq
  *
+ * @host:		The sdhci_host
+ *
  * The corecfg_baseclkfreq is supposed to contain the MHz of clk_xin.  This
  * function can be used to make that happen.
  *
@@ -854,8 +963,6 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
  * - It's assumed that clk_xin is not dynamic and that we use the SDHCI divider
  *   to achieve lower clock rates.  That means that this function is called once
  *   at probe time and never called again.
- *
- * @host:		The sdhci_host
  */
 static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
 {
@@ -919,10 +1026,10 @@ static void arasan_dt_read_clk_phase(struct device *dev,
 /**
  * arasan_dt_parse_clk_phases - Read Clock Delay values from DT
  *
- * Called at initialization to parse the values of Clock Delays.
- *
  * @dev:		Pointer to our struct device.
  * @clk_data:		Pointer to the Clock Data structure
+ *
+ * Called at initialization to parse the values of Clock Delays.
  */
 static void arasan_dt_parse_clk_phases(struct device *dev,
 				       struct sdhci_arasan_clk_data *clk_data)
@@ -954,6 +1061,16 @@ static void arasan_dt_parse_clk_phases(struct device *dev,
 		}
 	}
 
+	if (of_device_is_compatible(dev->of_node, "xlnx,versal-8.9a")) {
+		iclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_ICLK_PHASE;
+		oclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_OCLK_PHASE;
+
+		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
+			clk_data->clk_phase_in[i] = iclk_phase[i];
+			clk_data->clk_phase_out[i] = oclk_phase[i];
+		}
+	}
+
 	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_LEGACY,
 				 "clk-phase-legacy");
 	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS,
@@ -978,17 +1095,120 @@ static void arasan_dt_parse_clk_phases(struct device *dev,
 				 "clk-phase-mmc-hs400");
 }
 
+static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
+	.ops = &sdhci_arasan_ops,
+	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+			SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+static const struct sdhci_arasan_clk_ops arasan_clk_ops = {
+	.sdcardclk_ops = &arasan_sdcardclk_ops,
+	.sampleclk_ops = &arasan_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_generic_data = {
+	.pdata = &sdhci_arasan_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
+	.soc_ctl_map = &rk3399_soc_ctl_map,
+	.pdata = &sdhci_arasan_cqe_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_lgm_emmc_data = {
+	.soc_ctl_map = &intel_lgm_emmc_soc_ctl_map,
+	.pdata = &sdhci_arasan_cqe_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_lgm_sdxc_data = {
+	.soc_ctl_map = &intel_lgm_sdxc_soc_ctl_map,
+	.pdata = &sdhci_arasan_cqe_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static const struct sdhci_pltfm_data sdhci_arasan_zynqmp_pdata = {
+	.ops = &sdhci_arasan_ops,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+			SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+static const struct sdhci_arasan_clk_ops zynqmp_clk_ops = {
+	.sdcardclk_ops = &zynqmp_sdcardclk_ops,
+	.sampleclk_ops = &zynqmp_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_zynqmp_data = {
+	.pdata = &sdhci_arasan_zynqmp_pdata,
+	.clk_ops = &zynqmp_clk_ops,
+};
+
+static const struct sdhci_arasan_clk_ops versal_clk_ops = {
+	.sdcardclk_ops = &versal_sdcardclk_ops,
+	.sampleclk_ops = &versal_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_versal_data = {
+	.pdata = &sdhci_arasan_zynqmp_pdata,
+	.clk_ops = &versal_clk_ops,
+};
+
+static const struct of_device_id sdhci_arasan_of_match[] = {
+	/* SoC-specific compatible strings w/ soc_ctl_map */
+	{
+		.compatible = "rockchip,rk3399-sdhci-5.1",
+		.data = &sdhci_arasan_rk3399_data,
+	},
+	{
+		.compatible = "intel,lgm-sdhci-5.1-emmc",
+		.data = &intel_lgm_emmc_data,
+	},
+	{
+		.compatible = "intel,lgm-sdhci-5.1-sdxc",
+		.data = &intel_lgm_sdxc_data,
+	},
+	/* Generic compatible below here */
+	{
+		.compatible = "arasan,sdhci-8.9a",
+		.data = &sdhci_arasan_generic_data,
+	},
+	{
+		.compatible = "arasan,sdhci-5.1",
+		.data = &sdhci_arasan_generic_data,
+	},
+	{
+		.compatible = "arasan,sdhci-4.9a",
+		.data = &sdhci_arasan_generic_data,
+	},
+	{
+		.compatible = "xlnx,zynqmp-8.9a",
+		.data = &sdhci_arasan_zynqmp_data,
+	},
+	{
+		.compatible = "xlnx,versal-8.9a",
+		.data = &sdhci_arasan_versal_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
+
 /**
  * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int
 sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
@@ -1012,10 +1232,7 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 	sdcardclk_init.parent_names = &parent_clk_name;
 	sdcardclk_init.num_parents = 1;
 	sdcardclk_init.flags = CLK_GET_RATE_NOCACHE;
-	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
-		sdcardclk_init.ops = &zynqmp_sdcardclk_ops;
-	else
-		sdcardclk_init.ops = &arasan_sdcardclk_ops;
+	sdcardclk_init.ops = sdhci_arasan->clk_ops->sdcardclk_ops;
 
 	clk_data->sdcardclk_hw.init = &sdcardclk_init;
 	clk_data->sdcardclk =
@@ -1033,14 +1250,15 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 /**
  * sdhci_arasan_register_sampleclk - Register the sampleclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int
 sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
@@ -1064,10 +1282,7 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 	sampleclk_init.parent_names = &parent_clk_name;
 	sampleclk_init.num_parents = 1;
 	sampleclk_init.flags = CLK_GET_RATE_NOCACHE;
-	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
-		sampleclk_init.ops = &zynqmp_sampleclk_ops;
-	else
-		sampleclk_init.ops = &arasan_sampleclk_ops;
+	sampleclk_init.ops = sdhci_arasan->clk_ops->sampleclk_ops;
 
 	clk_data->sampleclk_hw.init = &sampleclk_init;
 	clk_data->sampleclk =
@@ -1085,10 +1300,10 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 /**
  * sdhci_arasan_unregister_sdclk - Undoes sdhci_arasan_register_sdclk()
  *
+ * @dev:		Pointer to our struct device.
+ *
  * Should be called any time we're exiting and sdhci_arasan_register_sdclk()
  * returned success.
- *
- * @dev:		Pointer to our struct device.
  */
 static void sdhci_arasan_unregister_sdclk(struct device *dev)
 {
@@ -1103,6 +1318,10 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
 /**
  * sdhci_arasan_register_sdclk - Register the sdcardclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
@@ -1115,10 +1334,7 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
  * to create nice clean device tree bindings and later (if needed) we can try
  * re-architecting SDHCI if we see some benefit to it.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
 				       struct clk *clk_xin,
@@ -1215,6 +1431,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 	sdhci_arasan->host = host;
 
 	sdhci_arasan->soc_ctl_map = data->soc_ctl_map;
+	sdhci_arasan->clk_ops = data->clk_ops;
 
 	node = of_parse_phandle(pdev->dev.of_node, "arasan,soc-ctl-syscon", 0);
 	if (node) {
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index c79bff5e2280..25f4e0f4f53b 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -6,6 +6,7 @@
  *		 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
@@ -179,9 +180,9 @@ static int sdhci_at91_set_clks_presets(struct device *dev)
 	clk_mul = gck_rate / clk_base_rate - 1;
 
 	caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK;
-	caps0 |= (clk_base << SDHCI_CLOCK_BASE_SHIFT) & SDHCI_CLOCK_V3_BASE_MASK;
+	caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base);
 	caps1 &= ~SDHCI_CLOCK_MUL_MASK;
-	caps1 |= (clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK;
+	caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul);
 	/* Set capabilities in r/w mode. */
 	writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
 	writel(caps0, host->ioaddr + SDHCI_CAPABILITIES);
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 525de2454a4d..af736afb4b91 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -249,12 +249,8 @@ static int ricoh_probe(struct sdhci_pci_chip *chip)
 static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
 {
 	slot->host->caps =
-		((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
-			& SDHCI_TIMEOUT_CLK_MASK) |
-
-		((0x21 << SDHCI_CLOCK_BASE_SHIFT)
-			& SDHCI_CLOCK_BASE_MASK) |
-
+		FIELD_PREP(SDHCI_TIMEOUT_CLK_MASK, 0x21) |
+		FIELD_PREP(SDHCI_CLOCK_BASE_MASK, 0x21) |
 		SDHCI_TIMEOUT_CLK_UNIT |
 		SDHCI_CAN_VDD_330 |
 		SDHCI_CAN_DO_HISPD |
@@ -601,6 +597,9 @@ static int intel_select_drive_strength(struct mmc_card *card,
 	struct sdhci_pci_slot *slot = sdhci_priv(host);
 	struct intel_host *intel_host = sdhci_pci_priv(slot);
 
+	if (!(mmc_driver_type_mask(intel_host->drv_strength) & card_drv))
+		return 0;
+
 	return intel_host->drv_strength;
 }
 
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index fa8105087d68..e2a846885902 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -494,7 +494,7 @@ static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
 	}
 }
 
-void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
+static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	u16 clk;
 
@@ -509,7 +509,7 @@ void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
 	sdhci_o2_enable_clk(host, clk);
 }
 
-int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
+static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_host *host;
@@ -578,7 +578,7 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
 	return 0;
 }
 
-int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
+static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 {
 	int ret;
 	u8 scratch;
@@ -783,7 +783,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 }
 
 #ifdef CONFIG_PM_SLEEP
-int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
+static int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
 {
 	sdhci_pci_o2_probe(chip);
 	return sdhci_pci_resume_host(chip);
diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index 2ab42c59e4f8..a910cb461ed7 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -406,7 +406,8 @@ static struct sdhci_ops sdhci_sprd_ops = {
 	.request_done = sdhci_sprd_request_done,
 };
 
-static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+static void sdhci_sprd_check_auto_cmd23(struct mmc_host *mmc,
+					struct mmc_request *mrq)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
@@ -422,10 +423,23 @@ static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	    mrq->sbc && (mrq->sbc->arg & SDHCI_SPRD_ARG2_STUFF) &&
 	    (host->flags & SDHCI_AUTO_CMD23))
 		host->flags &= ~SDHCI_AUTO_CMD23;
+}
+
+static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	sdhci_sprd_check_auto_cmd23(mmc, mrq);
 
 	sdhci_request(mmc, mrq);
 }
 
+static int sdhci_sprd_request_atomic(struct mmc_host *mmc,
+				      struct mmc_request *mrq)
+{
+	sdhci_sprd_check_auto_cmd23(mmc, mrq);
+
+	return sdhci_request_atomic(mmc, mrq);
+}
+
 static int sdhci_sprd_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
@@ -434,7 +448,7 @@ static int sdhci_sprd_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	if (!IS_ERR(mmc->supply.vqmmc)) {
 		ret = mmc_regulator_set_vqmmc(mmc, ios);
-		if (ret) {
+		if (ret < 0) {
 			pr_err("%s: Switching signalling voltage failed\n",
 			       mmc_hostname(mmc));
 			return ret;
@@ -556,11 +570,17 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
 		sdhci_sprd_voltage_switch;
 
 	host->mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
-		MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY;
+		MMC_CAP_WAIT_WHILE_BUSY;
+
 	ret = mmc_of_parse(host->mmc);
 	if (ret)
 		goto pltfm_free;
 
+	if (!mmc_card_is_removable(host->mmc))
+		host->mmc_host_ops.request_atomic = sdhci_sprd_request_atomic;
+	else
+		host->always_defer_done = true;
+
 	sprd_host = TO_SPRD_HOST(host);
 	sdhci_sprd_phy_param_parse(sprd_host, pdev->dev.of_node);
 
@@ -654,8 +674,6 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_cleanup_host;
 
-	host->always_defer_done = true;
-
 	ret = __sdhci_add_host(host);
 	if (ret)
 		goto err_cleanup_host;
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 1dea1ba66f7b..4703cd540c7f 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -235,6 +235,16 @@ static void xenon_voltage_switch(struct sdhci_host *host)
 {
 	/* Wait for 5ms after set 1.8V signal enable bit */
 	usleep_range(5000, 5500);
+
+	/*
+	 * For some reason the controller's Host Control2 register reports
+	 * the bit representing 1.8V signaling as 0 when read after it was
+	 * written as 1. Subsequent read reports 1.
+	 *
+	 * Since this may cause some issues, do an empty read of the Host
+	 * Control2 register here to circumvent this.
+	 */
+	sdhci_readw(host, SDHCI_HOST_CONTROL2);
 }
 
 static const struct sdhci_ops sdhci_xenon_ops = {
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 3f716466fcfd..1bb6b6796318 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -48,10 +48,10 @@
 static unsigned int debug_quirks = 0;
 static unsigned int debug_quirks2;
 
-static void sdhci_finish_data(struct sdhci_host *);
-
 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
 
+static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
+
 void sdhci_dumpregs(struct sdhci_host *host)
 {
 	SDHCI_DUMP("============ SDHCI REGISTER DUMP ===========\n");
@@ -317,6 +317,7 @@ static void sdhci_config_dma(struct sdhci_host *host)
 static void sdhci_init(struct sdhci_host *host, int soft)
 {
 	struct mmc_host *mmc = host->mmc;
+	unsigned long flags;
 
 	if (soft)
 		sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
@@ -326,7 +327,9 @@ static void sdhci_init(struct sdhci_host *host, int soft)
 	if (host->v4_mode)
 		sdhci_do_enable_v4_mode(host);
 
+	spin_lock_irqsave(&host->lock, flags);
 	sdhci_set_default_irqs(host);
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	host->cqe_on = false;
 
@@ -1350,13 +1353,25 @@ static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
 	       !mrq->cap_cmd_during_tfr;
 }
 
+static inline bool sdhci_auto_cmd23(struct sdhci_host *host,
+				    struct mmc_request *mrq)
+{
+	return mrq->sbc && (host->flags & SDHCI_AUTO_CMD23);
+}
+
+static inline bool sdhci_manual_cmd23(struct sdhci_host *host,
+				      struct mmc_request *mrq)
+{
+	return mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23);
+}
+
 static inline void sdhci_auto_cmd_select(struct sdhci_host *host,
 					 struct mmc_command *cmd,
 					 u16 *mode)
 {
 	bool use_cmd12 = sdhci_auto_cmd12(host, cmd->mrq) &&
 			 (cmd->opcode != SD_IO_RW_EXTENDED);
-	bool use_cmd23 = cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23);
+	bool use_cmd23 = sdhci_auto_cmd23(host, cmd->mrq);
 	u16 ctrl2;
 
 	/*
@@ -1416,7 +1431,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 	if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
 		mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI;
 		sdhci_auto_cmd_select(host, cmd, &mode);
-		if (cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23))
+		if (sdhci_auto_cmd23(host, cmd->mrq))
 			sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);
 	}
 
@@ -1466,6 +1481,9 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
 	if (host->data_cmd && host->data_cmd->mrq == mrq)
 		host->data_cmd = NULL;
 
+	if (host->deferred_cmd && host->deferred_cmd->mrq == mrq)
+		host->deferred_cmd = NULL;
+
 	if (host->data && host->data->mrq == mrq)
 		host->data = NULL;
 
@@ -1487,7 +1505,7 @@ static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
 	queue_work(host->complete_wq, &host->complete_work);
 }
 
-static void sdhci_finish_data(struct sdhci_host *host)
+static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
 {
 	struct mmc_command *data_cmd = host->data_cmd;
 	struct mmc_data *data = host->data;
@@ -1539,14 +1557,31 @@ static void sdhci_finish_data(struct sdhci_host *host)
 		} else {
 			/* Avoid triggering warning in sdhci_send_command() */
 			host->cmd = NULL;
-			sdhci_send_command(host, data->stop);
+			if (!sdhci_send_command(host, data->stop)) {
+				if (sw_data_timeout) {
+					/*
+					 * This is anyway a sw data timeout, so
+					 * give up now.
+					 */
+					data->stop->error = -EIO;
+					__sdhci_finish_mrq(host, data->mrq);
+				} else {
+					WARN_ON(host->deferred_cmd);
+					host->deferred_cmd = data->stop;
+				}
+			}
 		}
 	} else {
 		__sdhci_finish_mrq(host, data->mrq);
 	}
 }
 
-void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+static void sdhci_finish_data(struct sdhci_host *host)
+{
+	__sdhci_finish_data(host, false);
+}
+
+static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 {
 	int flags;
 	u32 mask;
@@ -1561,9 +1596,6 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	    cmd->opcode == MMC_STOP_TRANSMISSION)
 		cmd->flags |= MMC_RSP_BUSY;
 
-	/* Wait max 10 ms */
-	timeout = 10;
-
 	mask = SDHCI_CMD_INHIBIT;
 	if (sdhci_data_line_cmd(cmd))
 		mask |= SDHCI_DATA_INHIBIT;
@@ -1573,18 +1605,8 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	if (cmd->mrq->data && (cmd == cmd->mrq->data->stop))
 		mask &= ~SDHCI_DATA_INHIBIT;
 
-	while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
-		if (timeout == 0) {
-			pr_err("%s: Controller never released inhibit bit(s).\n",
-			       mmc_hostname(host->mmc));
-			sdhci_dumpregs(host);
-			cmd->error = -EIO;
-			sdhci_finish_mrq(host, cmd->mrq);
-			return;
-		}
-		timeout--;
-		mdelay(1);
-	}
+	if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask)
+		return false;
 
 	host->cmd = cmd;
 	host->data_timeout = 0;
@@ -1606,11 +1628,13 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	sdhci_set_transfer_mode(host, cmd);
 
 	if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
-		pr_err("%s: Unsupported response type!\n",
-			mmc_hostname(host->mmc));
-		cmd->error = -EINVAL;
-		sdhci_finish_mrq(host, cmd->mrq);
-		return;
+		WARN_ONCE(1, "Unsupported response type!\n");
+		/*
+		 * This does not happen in practice because 136-bit response
+		 * commands never have busy waiting, so rather than complicate
+		 * the error path, just remove busy waiting and continue.
+		 */
+		cmd->flags &= ~MMC_RSP_BUSY;
 	}
 
 	if (!(cmd->flags & MMC_RSP_PRESENT))
@@ -1645,8 +1669,61 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 		sdhci_external_dma_pre_transfer(host, cmd);
 
 	sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
+
+	return true;
+}
+
+static bool sdhci_present_error(struct sdhci_host *host,
+				struct mmc_command *cmd, bool present)
+{
+	if (!present || host->flags & SDHCI_DEVICE_DEAD) {
+		cmd->error = -ENOMEDIUM;
+		return true;
+	}
+
+	return false;
+}
+
+static bool sdhci_send_command_retry(struct sdhci_host *host,
+				     struct mmc_command *cmd,
+				     unsigned long flags)
+	__releases(host->lock)
+	__acquires(host->lock)
+{
+	struct mmc_command *deferred_cmd = host->deferred_cmd;
+	int timeout = 10; /* Approx. 10 ms */
+	bool present;
+
+	while (!sdhci_send_command(host, cmd)) {
+		if (!timeout--) {
+			pr_err("%s: Controller never released inhibit bit(s).\n",
+			       mmc_hostname(host->mmc));
+			sdhci_dumpregs(host);
+			cmd->error = -EIO;
+			return false;
+		}
+
+		spin_unlock_irqrestore(&host->lock, flags);
+
+		usleep_range(1000, 1250);
+
+		present = host->mmc->ops->get_cd(host->mmc);
+
+		spin_lock_irqsave(&host->lock, flags);
+
+		/* A deferred command might disappear, handle that */
+		if (cmd == deferred_cmd && cmd != host->deferred_cmd)
+			return true;
+
+		if (sdhci_present_error(host, cmd, present))
+			return false;
+	}
+
+	if (cmd == host->deferred_cmd)
+		host->deferred_cmd = NULL;
+
+	return true;
 }
-EXPORT_SYMBOL_GPL(sdhci_send_command);
 
 static void sdhci_read_rsp_136(struct sdhci_host *host, struct mmc_command *cmd)
 {
@@ -1707,7 +1784,10 @@ static void sdhci_finish_command(struct sdhci_host *host)
 
 	/* Finished CMD23, now send actual command. */
 	if (cmd == cmd->mrq->sbc) {
-		sdhci_send_command(host, cmd->mrq->cmd);
+		if (!sdhci_send_command(host, cmd->mrq->cmd)) {
+			WARN_ON(host->deferred_cmd);
+			host->deferred_cmd = cmd->mrq->cmd;
+		}
 	} else {
 
 		/* Processed actual command. */
@@ -2037,11 +2117,10 @@ EXPORT_SYMBOL_GPL(sdhci_set_power_and_bus_voltage);
 
 void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 {
-	struct sdhci_host *host;
-	int present;
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct mmc_command *cmd;
 	unsigned long flags;
-
-	host = mmc_priv(mmc);
+	bool present;
 
 	/* Firstly check card presence */
 	present = mmc->ops->get_cd(mmc);
@@ -2050,19 +2129,57 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	sdhci_led_activate(host);
 
-	if (!present || host->flags & SDHCI_DEVICE_DEAD) {
-		mrq->cmd->error = -ENOMEDIUM;
+	if (sdhci_present_error(host, mrq->cmd, present))
+		goto out_finish;
+
+	cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
+
+	if (!sdhci_send_command_retry(host, cmd, flags))
+		goto out_finish;
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return;
+
+out_finish:
+	sdhci_finish_mrq(host, mrq);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+EXPORT_SYMBOL_GPL(sdhci_request);
+
+int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct mmc_command *cmd;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (sdhci_present_error(host, mrq->cmd, true)) {
 		sdhci_finish_mrq(host, mrq);
-	} else {
-		if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
-			sdhci_send_command(host, mrq->sbc);
-		else
-			sdhci_send_command(host, mrq->cmd);
+		goto out_finish;
 	}
 
+	cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
+
+	/*
+	 * The HSQ may send a command in interrupt context without polling
+	 * the busy signaling, which means we should return BUSY if controller
+	 * has not released inhibit bits to allow HSQ trying to send request
+	 * again in non-atomic context. So we should not finish this request
+	 * here.
+	 */
+	if (!sdhci_send_command(host, cmd))
+		ret = -EBUSY;
+	else
+		sdhci_led_activate(host);
+
+out_finish:
 	spin_unlock_irqrestore(&host->lock, flags);
+	return ret;
 }
-EXPORT_SYMBOL_GPL(sdhci_request);
+EXPORT_SYMBOL_GPL(sdhci_request_atomic);
 
 void sdhci_set_bus_width(struct sdhci_host *host, int width)
 {
@@ -2411,7 +2528,7 @@ int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 
 		if (!IS_ERR(mmc->supply.vqmmc)) {
 			ret = mmc_regulator_set_vqmmc(mmc, ios);
-			if (ret) {
+			if (ret < 0) {
 				pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
 					mmc_hostname(mmc));
 				return -EIO;
@@ -2434,7 +2551,7 @@ int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 			return -EINVAL;
 		if (!IS_ERR(mmc->supply.vqmmc)) {
 			ret = mmc_regulator_set_vqmmc(mmc, ios);
-			if (ret) {
+			if (ret < 0) {
 				pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
 					mmc_hostname(mmc));
 				return -EIO;
@@ -2466,7 +2583,7 @@ int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 			return -EINVAL;
 		if (!IS_ERR(mmc->supply.vqmmc)) {
 			ret = mmc_regulator_set_vqmmc(mmc, ios);
-			if (ret) {
+			if (ret < 0) {
 				pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
 					mmc_hostname(mmc));
 				return -EIO;
@@ -2600,7 +2717,11 @@ void sdhci_send_tuning(struct sdhci_host *host, u32 opcode)
 	 */
 	sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
 
-	sdhci_send_command(host, &cmd);
+	if (!sdhci_send_command_retry(host, &cmd, flags)) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		host->tuning_done = 0;
+		return;
+	}
 
 	host->cmd = NULL;
 
@@ -3018,7 +3139,7 @@ static void sdhci_timeout_data_timer(struct timer_list *t)
 
 		if (host->data) {
 			host->data->error = -ETIMEDOUT;
-			sdhci_finish_data(host);
+			__sdhci_finish_data(host, true);
 			queue_work(host->complete_wq, &host->complete_work);
 		} else if (host->data_cmd) {
 			host->data_cmd->error = -ETIMEDOUT;
@@ -3390,6 +3511,9 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 		}
 	}
 out:
+	if (host->deferred_cmd)
+		result = IRQ_WAKE_THREAD;
+
 	spin_unlock(&host->lock);
 
 	/* Process mrqs ready for immediate completion */
@@ -3415,6 +3539,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
 {
 	struct sdhci_host *host = dev_id;
+	struct mmc_command *cmd;
 	unsigned long flags;
 	u32 isr;
 
@@ -3422,8 +3547,14 @@ static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
 		;
 
 	spin_lock_irqsave(&host->lock, flags);
+
 	isr = host->thread_isr;
 	host->thread_isr = 0;
+
+	cmd = host->deferred_cmd;
+	if (cmd && !sdhci_send_command_retry(host, cmd, flags))
+		sdhci_finish_mrq(host, cmd->mrq);
+
 	spin_unlock_irqrestore(&host->lock, flags);
 
 	if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
@@ -4117,11 +4248,9 @@ int sdhci_setup_host(struct sdhci_host *host)
 	}
 
 	if (host->version >= SDHCI_SPEC_300)
-		host->max_clk = (host->caps & SDHCI_CLOCK_V3_BASE_MASK)
-			>> SDHCI_CLOCK_BASE_SHIFT;
+		host->max_clk = FIELD_GET(SDHCI_CLOCK_V3_BASE_MASK, host->caps);
 	else
-		host->max_clk = (host->caps & SDHCI_CLOCK_BASE_MASK)
-			>> SDHCI_CLOCK_BASE_SHIFT;
+		host->max_clk = FIELD_GET(SDHCI_CLOCK_BASE_MASK, host->caps);
 
 	host->max_clk *= 1000000;
 	if (host->max_clk == 0 || host->quirks &
@@ -4139,8 +4268,7 @@ int sdhci_setup_host(struct sdhci_host *host)
 	 * In case of Host Controller v3.00, find out whether clock
 	 * multiplier is supported.
 	 */
-	host->clk_mul = (host->caps1 & SDHCI_CLOCK_MUL_MASK) >>
-			SDHCI_CLOCK_MUL_SHIFT;
+	host->clk_mul = FIELD_GET(SDHCI_CLOCK_MUL_MASK, host->caps1);
 
 	/*
 	 * In case the value in Clock Multiplier is 0, then programmable
@@ -4173,8 +4301,7 @@ int sdhci_setup_host(struct sdhci_host *host)
 		mmc->f_max = max_clk;
 
 	if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
-		host->timeout_clk = (host->caps & SDHCI_TIMEOUT_CLK_MASK) >>
-					SDHCI_TIMEOUT_CLK_SHIFT;
+		host->timeout_clk = FIELD_GET(SDHCI_TIMEOUT_CLK_MASK, host->caps);
 
 		if (host->caps & SDHCI_TIMEOUT_CLK_UNIT)
 			host->timeout_clk *= 1000;
@@ -4326,8 +4453,8 @@ int sdhci_setup_host(struct sdhci_host *host)
 		mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
 
 	/* Initial value for re-tuning timer count */
-	host->tuning_count = (host->caps1 & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
-			     SDHCI_RETUNING_TIMER_COUNT_SHIFT;
+	host->tuning_count = FIELD_GET(SDHCI_RETUNING_TIMER_COUNT_MASK,
+				       host->caps1);
 
 	/*
 	 * In case Re-tuning Timer is not disabled, the actual value of
@@ -4337,8 +4464,7 @@ int sdhci_setup_host(struct sdhci_host *host)
 		host->tuning_count = 1 << (host->tuning_count - 1);
 
 	/* Re-tuning mode supported by the Host Controller */
-	host->tuning_mode = (host->caps1 & SDHCI_RETUNING_MODE_MASK) >>
-			     SDHCI_RETUNING_MODE_SHIFT;
+	host->tuning_mode = FIELD_GET(SDHCI_RETUNING_MODE_MASK, host->caps1);
 
 	ocr_avail = 0;
 
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 79dffbb731d3..8d2a096fdfb1 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -200,12 +200,10 @@
 #define  SDHCI_CTRL_PRESET_VAL_ENABLE	0x8000
 
 #define SDHCI_CAPABILITIES	0x40
-#define  SDHCI_TIMEOUT_CLK_MASK	0x0000003F
-#define  SDHCI_TIMEOUT_CLK_SHIFT 0
+#define  SDHCI_TIMEOUT_CLK_MASK		GENMASK(5, 0)
 #define  SDHCI_TIMEOUT_CLK_UNIT	0x00000080
-#define  SDHCI_CLOCK_BASE_MASK	0x00003F00
-#define  SDHCI_CLOCK_V3_BASE_MASK	0x0000FF00
-#define  SDHCI_CLOCK_BASE_SHIFT	8
+#define  SDHCI_CLOCK_BASE_MASK		GENMASK(13, 8)
+#define  SDHCI_CLOCK_V3_BASE_MASK	GENMASK(15, 8)
 #define  SDHCI_MAX_BLOCK_MASK	0x00030000
 #define  SDHCI_MAX_BLOCK_SHIFT  16
 #define  SDHCI_CAN_DO_8BIT	0x00040000
@@ -220,24 +218,20 @@
 #define  SDHCI_CAN_64BIT_V4	0x08000000
 #define  SDHCI_CAN_64BIT	0x10000000
 
+#define SDHCI_CAPABILITIES_1	0x44
 #define  SDHCI_SUPPORT_SDR50	0x00000001
 #define  SDHCI_SUPPORT_SDR104	0x00000002
 #define  SDHCI_SUPPORT_DDR50	0x00000004
 #define  SDHCI_DRIVER_TYPE_A	0x00000010
 #define  SDHCI_DRIVER_TYPE_C	0x00000020
 #define  SDHCI_DRIVER_TYPE_D	0x00000040
-#define  SDHCI_RETUNING_TIMER_COUNT_MASK	0x00000F00
-#define  SDHCI_RETUNING_TIMER_COUNT_SHIFT	8
+#define  SDHCI_RETUNING_TIMER_COUNT_MASK	GENMASK(11, 8)
 #define  SDHCI_USE_SDR50_TUNING			0x00002000
-#define  SDHCI_RETUNING_MODE_MASK		0x0000C000
-#define  SDHCI_RETUNING_MODE_SHIFT		14
-#define  SDHCI_CLOCK_MUL_MASK	0x00FF0000
-#define  SDHCI_CLOCK_MUL_SHIFT	16
+#define  SDHCI_RETUNING_MODE_MASK		GENMASK(15, 14)
+#define  SDHCI_CLOCK_MUL_MASK			GENMASK(23, 16)
 #define  SDHCI_CAN_DO_ADMA3	0x08000000
 #define  SDHCI_SUPPORT_HS400	0x80000000 /* Non-standard */
 
-#define SDHCI_CAPABILITIES_1	0x44
-
 #define SDHCI_MAX_CURRENT		0x48
 #define  SDHCI_MAX_CURRENT_LIMIT	0xFF
 #define  SDHCI_MAX_CURRENT_330_MASK	0x0000FF
@@ -540,6 +534,7 @@ struct sdhci_host {
 	struct mmc_request *mrqs_done[SDHCI_MAX_MRQS];	/* Requests done */
 	struct mmc_command *cmd;	/* Current command */
 	struct mmc_command *data_cmd;	/* Current data command */
+	struct mmc_command *deferred_cmd;	/* Deferred command */
 	struct mmc_data *data;	/* Current data request */
 	unsigned int data_early:1;	/* Data finished before cmd */
 
@@ -757,7 +752,6 @@ void sdhci_cleanup_host(struct sdhci_host *host);
 int __sdhci_add_host(struct sdhci_host *host);
 int sdhci_add_host(struct sdhci_host *host);
 void sdhci_remove_host(struct sdhci_host *host, int dead);
-void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
 
 static inline void sdhci_read_caps(struct sdhci_host *host)
 {
@@ -776,6 +770,7 @@ void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
 			   unsigned short vdd);
 void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
+int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
 void sdhci_set_bus_width(struct sdhci_host *host, int width);
 void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index f87d7967457f..3bfbd89bd4ab 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -951,9 +951,13 @@ static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 static int sunxi_mmc_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 {
+	int ret;
+
 	/* vqmmc regulator is available */
-	if (!IS_ERR(mmc->supply.vqmmc))
-		return mmc_regulator_set_vqmmc(mmc, ios);
+	if (!IS_ERR(mmc->supply.vqmmc)) {
+		ret = mmc_regulator_set_vqmmc(mmc, ios);
+		return ret < 0 ? ret : 0;
+	}
 
 	/* no vqmmc regulator, assume fixed regulator at 3/3.3V */
 	if (mmc->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330)
diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c
index 9a0b1e4e405d..369b8dee2e3d 100644
--- a/drivers/mmc/host/usdhi6rol0.c
+++ b/drivers/mmc/host/usdhi6rol0.c
@@ -136,6 +136,8 @@
 
 #define USDHI6_MIN_DMA 64
 
+#define USDHI6_REQ_TIMEOUT_MS 4000
+
 enum usdhi6_wait_for {
 	USDHI6_WAIT_FOR_REQUEST,
 	USDHI6_WAIT_FOR_CMD,
@@ -1763,7 +1765,12 @@ static int usdhi6_probe(struct platform_device *pdev)
 	host		= mmc_priv(mmc);
 	host->mmc	= mmc;
 	host->wait	= USDHI6_WAIT_FOR_REQUEST;
-	host->timeout	= msecs_to_jiffies(4000);
+	host->timeout	= msecs_to_jiffies(USDHI6_REQ_TIMEOUT_MS);
+	/*
+	 * We use a fixed timeout of 4s, hence inform the core about it. A
+	 * future improvement should instead respect the cmd->busy_timeout.
+	 */
+	mmc->max_busy_timeout = USDHI6_REQ_TIMEOUT_MS;
 
 	host->pinctrl = devm_pinctrl_get(&pdev->dev);
 	if (IS_ERR(host->pinctrl)) {
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 740179f42cf2..67f917d6ecd3 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -28,6 +28,8 @@
 #include <linux/pnp.h>
 #include <linux/highmem.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 
@@ -770,22 +772,22 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		 * interrupts.
 		 */
 		switch (cmd->opcode) {
-		case 11:
-		case 17:
-		case 18:
-		case 20:
-		case 24:
-		case 25:
-		case 26:
-		case 27:
-		case 30:
-		case 42:
-		case 56:
+		case SD_SWITCH_VOLTAGE:
+		case MMC_READ_SINGLE_BLOCK:
+		case MMC_READ_MULTIPLE_BLOCK:
+		case MMC_WRITE_DAT_UNTIL_STOP:
+		case MMC_WRITE_BLOCK:
+		case MMC_WRITE_MULTIPLE_BLOCK:
+		case MMC_PROGRAM_CID:
+		case MMC_PROGRAM_CSD:
+		case MMC_SEND_WRITE_PROT:
+		case MMC_LOCK_UNLOCK:
+		case MMC_GEN_CMD:
 			break;
 
 		/* ACMDs. We don't keep track of state, so we just treat them
 		 * like any other command. */
-		case 51:
+		case SD_APP_SEND_SCR:
 			break;
 
 		default:
diff --git a/drivers/most/core.c b/drivers/most/core.c
index 06426fc5c990..f781c46cd4af 100644
--- a/drivers/most/core.c
+++ b/drivers/most/core.c
@@ -1483,7 +1483,7 @@ static void __exit most_exit(void)
 	ida_destroy(&mdev_id);
 }
 
-module_init(most_init);
+subsys_initcall(most_init);
 module_exit(most_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Christian Gromm <christian.gromm@microchip.com>");
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index cc68ea84318e..1ab4386a099a 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -499,7 +499,7 @@ int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
  * the flash is ready for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
  */
 static int spi_nor_xsr_ready(struct spi_nor *nor)
 {
@@ -542,7 +542,7 @@ static void spi_nor_clear_sr(struct spi_nor *nor)
  * for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
  */
 static int spi_nor_sr_ready(struct spi_nor *nor)
 {
@@ -606,7 +606,7 @@ static void spi_nor_clear_fsr(struct spi_nor *nor)
  * ready for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
  */
 static int spi_nor_fsr_ready(struct spi_nor *nor)
 {
@@ -640,14 +640,14 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
 		return -EIO;
 	}
 
-	return nor->bouncebuf[0] & FSR_READY;
+	return !!(nor->bouncebuf[0] & FSR_READY);
 }
 
 /**
  * spi_nor_ready() - Query the flash to see if it is ready for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
  */
 static int spi_nor_ready(struct spi_nor *nor)
 {
@@ -2675,7 +2675,7 @@ static int spi_nor_setup(struct spi_nor *nor,
 /**
  * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
  * settings based on MFR register and ->default_init() hook.
- * @nor:	pointer to a 'struct spi-nor'.
+ * @nor:	pointer to a 'struct spi_nor'.
  */
 static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
 {
@@ -2690,7 +2690,7 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
 /**
  * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
  * based on JESD216 SFDP standard.
- * @nor:	pointer to a 'struct spi-nor'.
+ * @nor:	pointer to a 'struct spi_nor'.
  *
  * The method has a roll-back mechanism: in case the SFDP parsing fails, the
  * legacy flash parameters and settings will be restored.
@@ -2712,7 +2712,7 @@ static void spi_nor_sfdp_init_params(struct spi_nor *nor)
 /**
  * spi_nor_info_init_params() - Initialize the flash's parameters and settings
  * based on nor->info data.
- * @nor:	pointer to a 'struct spi-nor'.
+ * @nor:	pointer to a 'struct spi_nor'.
  */
 static void spi_nor_info_init_params(struct spi_nor *nor)
 {
@@ -2841,7 +2841,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
 
 /**
  * spi_nor_init_params() - Initialize the flash's parameters and settings.
- * @nor:	pointer to a 'struct spi-nor'.
+ * @nor:	pointer to a 'struct spi_nor'.
  *
  * The flash parameters and settings are initialized based on a sequence of
  * calls that are ordered by priority:
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index ab0f963d630c..96735d83c77c 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -63,10 +63,16 @@ static const struct flash_info macronix_parts[] = {
 		.fixups = &mx25l25635_fixups },
 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
 			      SECT_4K | SPI_NOR_4B_OPCODES) },
+	{ "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16,
 			      SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+	{ "mx25l51245g", INFO(0xc2201a, 0, 64 * 1024, 1024,
+			      SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      SPI_NOR_4B_OPCODES) },
 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024,
 			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			      SPI_NOR_4B_OPCODES) },
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 6c034b9718e2..3dca5b9af3b6 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -29,7 +29,9 @@ static const struct flash_info st_parts[] = {
 	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128,
 			      SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
 	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512,
@@ -59,6 +61,8 @@ static const struct flash_info st_parts[] = {
 			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 |
 			      NO_CHIP_ERASE) },
 	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 6756202ace4b..88183eba8ac1 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -22,7 +22,9 @@ static const struct flash_info spansion_parts[] = {
 	{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
 			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			      USE_CLSR) },
-	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
+	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128,
+			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			     USE_CLSR) },
 	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512,
 			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			     USE_CLSR) },
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index b57b84fb97d0..14d890b00d2c 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -1297,7 +1297,7 @@ static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum,
 	if (!ubi_dbg_chk_io(ubi))
 		return 0;
 
-	buf1 = __vmalloc(len, GFP_NOFS, PAGE_KERNEL);
+	buf1 = __vmalloc(len, GFP_NOFS);
 	if (!buf1) {
 		ubi_err(ubi, "cannot allocate memory to check writes");
 		return 0;
@@ -1361,7 +1361,7 @@ int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
 	if (!ubi_dbg_chk_io(ubi))
 		return 0;
 
-	buf = __vmalloc(len, GFP_NOFS, PAGE_KERNEL);
+	buf = __vmalloc(len, GFP_NOFS);
 	if (!buf) {
 		ubi_err(ubi, "cannot allocate memory to check for 0xFFs");
 		return 0;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b103fbdd0f68..c822f4a6d166 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -50,7 +50,7 @@ config BONDING
 	  The driver supports multiple bonding modes to allow for both high
 	  performance and high availability operation.
 
-	  Refer to <file:Documentation/networking/bonding.txt> for more
+	  Refer to <file:Documentation/networking/bonding.rst> for more
 	  information.
 
 	  To compile this driver as a module, choose M here: the module
@@ -126,7 +126,7 @@ config EQUALIZER
 	  Linux driver or with a Livingston Portmaster 2e.
 
 	  Say Y if you want this and read
-	  <file:Documentation/networking/eql.txt>.  You may also want to read
+	  <file:Documentation/networking/eql.rst>.  You may also want to read
 	  section 6.2 of the NET-3-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index af509b05ac5c..ccde6479050c 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -59,7 +59,7 @@ config COPS
 	  package. This driver is experimental, which means that it may not
 	  work. This driver will only work if you choose "AppleTalk DDP"
 	  networking support, above.
-	  Please read the file <file:Documentation/networking/cops.txt>.
+	  Please read the file <file:Documentation/networking/cops.rst>.
 
 config COPS_DAYNA
 	bool "Dayna firmware support"
@@ -86,7 +86,7 @@ config IPDDP
 	  box is stuck on an AppleTalk only network) or decapsulate (e.g. if
 	  you want your Linux box to act as an Internet gateway for a zoo of
 	  AppleTalk connected Macs). Please see the file
-	  <file:Documentation/networking/ipddp.txt> for more information.
+	  <file:Documentation/networking/ipddp.rst> for more information.
 
 	  If you say Y here, the AppleTalk-IP support will be compiled into
 	  the kernel. In this case, you can either use encapsulation or
@@ -107,4 +107,4 @@ config IPDDP_ENCAP
 	  IP packets inside AppleTalk frames; this is useful if your Linux box
 	  is stuck on an AppleTalk network (which hopefully contains a
 	  decapsulator somewhere). Please see
-	  <file:Documentation/networking/ipddp.txt> for more information.
+	  <file:Documentation/networking/ipddp.rst> for more information.
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 27551bf3d7e4..43eef60653b2 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -9,7 +9,7 @@ menuconfig ARCNET
 	---help---
 	  If you have a network card of this type, say Y and check out the
 	  (arguably) beautiful poetry in
-	  <file:Documentation/networking/arcnet.txt>.
+	  <file:Documentation/networking/arcnet.rst>.
 
 	  You need both this driver, and the driver for the particular ARCnet
 	  chipset of your card. If you don't know, then it's probably a
@@ -28,7 +28,7 @@ config ARCNET_1201
 	  arc0 device.  You need to say Y here to communicate with
 	  industry-standard RFC1201 implementations, like the arcether.com
 	  packet driver or most DOS/Windows ODI drivers.  Please read the
-	  ARCnet documentation in <file:Documentation/networking/arcnet.txt>
+	  ARCnet documentation in <file:Documentation/networking/arcnet.rst>
 	  for more information about using arc0.
 
 config ARCNET_1051
@@ -42,7 +42,7 @@ config ARCNET_1051
 	  industry-standard RFC1201 implementations, like the arcether.com
 	  packet driver or most DOS/Windows ODI drivers. RFC1201 is included
 	  automatically as the arc0 device. Please read the ARCnet
-	  documentation in <file:Documentation/networking/arcnet.txt> for more
+	  documentation in <file:Documentation/networking/arcnet.rst> for more
 	  information about using arc0e and arc0s.
 
 config ARCNET_RAW
diff --git a/drivers/net/bonding/bonding_priv.h b/drivers/net/bonding/bonding_priv.h
index 45b77bc8c7b3..48cdf3a49a7d 100644
--- a/drivers/net/bonding/bonding_priv.h
+++ b/drivers/net/bonding/bonding_priv.h
@@ -14,7 +14,7 @@
 
 #ifndef _BONDING_PRIV_H
 #define _BONDING_PRIV_H
-#include <linux/vermagic.h>
+#include <generated/utsrelease.h>
 
 #define DRV_NAME	"bonding"
 #define DRV_DESCRIPTION	"Ethernet Channel Bonding Driver"
diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig
index 661c25eb1c46..1f2f2e8209c3 100644
--- a/drivers/net/caif/Kconfig
+++ b/drivers/net/caif/Kconfig
@@ -28,7 +28,7 @@ config CAIF_SPI_SLAVE
 	  The CAIF Link layer SPI Protocol driver for Slave SPI interface.
 	  This driver implements a platform driver to accommodate for a
 	  platform specific SPI device. A sample CAIF SPI Platform device is
-	  provided in <file:Documentation/networking/caif/spi_porting.txt>.
+	  provided in <file:Documentation/networking/caif/spi_porting.rst>.
 
 config CAIF_SPI_SYNC
 	bool "Next command and length in start of frame"
@@ -50,7 +50,7 @@ config CAIF_HSI
 
 config CAIF_VIRTIO
 	tristate "CAIF virtio transport driver"
-	depends on CAIF && HAS_DMA && VHOST_DPN
+	depends on CAIF && HAS_DMA
 	select VHOST_RING
 	select VIRTIO
 	select GENERIC_ALLOCATOR
diff --git a/drivers/net/can/peak_canfd/peak_pciefd_main.c b/drivers/net/can/peak_canfd/peak_pciefd_main.c
index d08a3d559114..6ad83a881039 100644
--- a/drivers/net/can/peak_canfd/peak_pciefd_main.c
+++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c
@@ -146,7 +146,7 @@ struct pciefd_rx_dma {
 	__le32 irq_status;
 	__le32 sys_time_low;
 	__le32 sys_time_high;
-	struct pucan_rx_msg msg[0];
+	struct pucan_rx_msg msg[];
 } __packed __aligned(4);
 
 /* Tx Link record */
@@ -194,7 +194,7 @@ struct pciefd_board {
 	struct pci_dev *pci_dev;
 	int can_count;
 	spinlock_t cmd_lock;		/* 64-bits cmds must be atomic */
-	struct pciefd_can *can[0];	/* array of network devices */
+	struct pciefd_can *can[];	/* array of network devices */
 };
 
 /* supported device ids. */
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index 0a1be5259be0..1207c3095027 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -524,7 +524,7 @@ static void b53_srab_prepare_irq(struct platform_device *pdev)
 
 		port->num = i;
 		port->dev = dev;
-		port->irq = platform_get_irq_byname(pdev, name);
+		port->irq = platform_get_irq_byname_optional(pdev, name);
 		kfree(name);
 	}
 
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index dd8a5666a584..2b4a723c8306 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3962,7 +3962,6 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
 	.serdes_get_stats = mv88e6390_serdes_get_stats,
 	.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
 	.serdes_get_regs = mv88e6390_serdes_get_regs,
-	.phylink_validate = mv88e6390_phylink_validate,
 	.gpio_ops = &mv88e6352_gpio_ops,
 	.phylink_validate = mv88e6390_phylink_validate,
 };
@@ -4021,7 +4020,6 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
 	.serdes_get_stats = mv88e6390_serdes_get_stats,
 	.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
 	.serdes_get_regs = mv88e6390_serdes_get_regs,
-	.phylink_validate = mv88e6390_phylink_validate,
 	.gpio_ops = &mv88e6352_gpio_ops,
 	.phylink_validate = mv88e6390x_phylink_validate,
 };
@@ -4079,7 +4077,6 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
 	.serdes_get_stats = mv88e6390_serdes_get_stats,
 	.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
 	.serdes_get_regs = mv88e6390_serdes_get_regs,
-	.phylink_validate = mv88e6390_phylink_validate,
 	.avb_ops = &mv88e6390_avb_ops,
 	.ptp_ops = &mv88e6352_ptp_ops,
 	.phylink_validate = mv88e6390_phylink_validate,
@@ -4235,7 +4232,6 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
 	.serdes_get_stats = mv88e6390_serdes_get_stats,
 	.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
 	.serdes_get_regs = mv88e6390_serdes_get_regs,
-	.phylink_validate = mv88e6390_phylink_validate,
 	.gpio_ops = &mv88e6352_gpio_ops,
 	.avb_ops = &mv88e6390_avb_ops,
 	.ptp_ops = &mv88e6352_ptp_ops,
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index d0a3764ff0cf..8a633ddce6c5 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -7,6 +7,7 @@
 #include <soc/mscc/ocelot_sys.h>
 #include <soc/mscc/ocelot_dev.h>
 #include <soc/mscc/ocelot_ana.h>
+#include <soc/mscc/ocelot_ptp.h>
 #include <soc/mscc/ocelot.h>
 #include <linux/packing.h>
 #include <linux/module.h>
@@ -494,6 +495,23 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports)
 	return 0;
 }
 
+static struct ptp_clock_info ocelot_ptp_clock_info = {
+	.owner		= THIS_MODULE,
+	.name		= "felix ptp",
+	.max_adj	= 0x7fffffff,
+	.n_alarm	= 0,
+	.n_ext_ts	= 0,
+	.n_per_out	= OCELOT_PTP_PINS_NUM,
+	.n_pins		= OCELOT_PTP_PINS_NUM,
+	.pps		= 0,
+	.gettime64	= ocelot_ptp_gettime64,
+	.settime64	= ocelot_ptp_settime64,
+	.adjtime	= ocelot_ptp_adjtime,
+	.adjfine	= ocelot_ptp_adjfine,
+	.verify		= ocelot_ptp_verify,
+	.enable		= ocelot_ptp_enable,
+};
+
 /* Hardware initialization done here so that we can allocate structures with
  * devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing
  * us to allocate structures twice (leak memory) and map PCI memory twice
@@ -504,12 +522,21 @@ static int felix_setup(struct dsa_switch *ds)
 	struct ocelot *ocelot = ds->priv;
 	struct felix *felix = ocelot_to_felix(ocelot);
 	int port, err;
+	int tc;
 
 	err = felix_init_structs(felix, ds->num_ports);
 	if (err)
 		return err;
 
 	ocelot_init(ocelot);
+	if (ocelot->ptp) {
+		err = ocelot_init_timestamp(ocelot, &ocelot_ptp_clock_info);
+		if (err) {
+			dev_err(ocelot->dev,
+				"Timestamp initialization failed\n");
+			ocelot->ptp = 0;
+		}
+	}
 
 	for (port = 0; port < ds->num_ports; port++) {
 		ocelot_init_port(ocelot, port);
@@ -529,6 +556,12 @@ static int felix_setup(struct dsa_switch *ds)
 	ocelot_write_rix(ocelot,
 			 ANA_PGID_PGID_PGID(GENMASK(ocelot->num_phys_ports, 0)),
 			 ANA_PGID_PGID, PGID_UC);
+	/* Setup the per-traffic class flooding PGIDs */
+	for (tc = 0; tc < FELIX_NUM_TC; tc++)
+		ocelot_write_rix(ocelot, ANA_FLOODING_FLD_MULTICAST(PGID_MC) |
+				 ANA_FLOODING_FLD_BROADCAST(PGID_MC) |
+				 ANA_FLOODING_FLD_UNICAST(PGID_UC),
+				 ANA_FLOODING, tc);
 
 	ds->mtu_enforcement_ingress = true;
 	/* It looks like the MAC/PCS interrupt register - PM0_IEVENT (0x8040)
@@ -548,6 +581,7 @@ static void felix_teardown(struct dsa_switch *ds)
 	if (felix->info->mdio_bus_free)
 		felix->info->mdio_bus_free(ocelot);
 
+	ocelot_deinit_timestamp(ocelot);
 	/* stop workqueue thread */
 	ocelot_deinit(ocelot);
 }
diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h
index 82d46f260041..2ad793c0e1df 100644
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -5,6 +5,7 @@
 #define _MSCC_FELIX_H
 
 #define ocelot_to_felix(o)		container_of((o), struct felix, ocelot)
+#define FELIX_NUM_TC			8
 
 /* Platform-specific information */
 struct felix_info {
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index b4078f3c5c38..4fe707ef54b8 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -313,6 +313,8 @@ static const u32 vsc9959_ptp_regmap[] = {
 	REG(PTP_PIN_TOD_SEC_MSB,           0x000004),
 	REG(PTP_PIN_TOD_SEC_LSB,           0x000008),
 	REG(PTP_PIN_TOD_NSEC,              0x00000c),
+	REG(PTP_PIN_WF_HIGH_PERIOD,        0x000014),
+	REG(PTP_PIN_WF_LOW_PERIOD,         0x000018),
 	REG(PTP_CFG_MISC,                  0x0000a0),
 	REG(PTP_CLK_CFG_ADJ_CFG,           0x0000a4),
 	REG(PTP_CLK_CFG_ADJ_FREQ,          0x0000a8),
diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h
index 8b60dbd567f2..2f62942692ec 100644
--- a/drivers/net/dsa/sja1105/sja1105.h
+++ b/drivers/net/dsa/sja1105/sja1105.h
@@ -49,6 +49,7 @@ struct sja1105_regs {
 	u64 ptpschtm;
 	u64 ptpegr_ts[SJA1105_NUM_PORTS];
 	u64 pad_mii_tx[SJA1105_NUM_PORTS];
+	u64 pad_mii_rx[SJA1105_NUM_PORTS];
 	u64 pad_mii_id[SJA1105_NUM_PORTS];
 	u64 cgu_idiv[SJA1105_NUM_PORTS];
 	u64 mii_tx_clk[SJA1105_NUM_PORTS];
diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c
index 0fdc2d55fff6..2a9b8a6a5306 100644
--- a/drivers/net/dsa/sja1105/sja1105_clocking.c
+++ b/drivers/net/dsa/sja1105/sja1105_clocking.c
@@ -7,12 +7,16 @@
 
 #define SJA1105_SIZE_CGU_CMD	4
 
-struct sja1105_cfg_pad_mii_tx {
+/* Common structure for CFG_PAD_MIIx_RX and CFG_PAD_MIIx_TX */
+struct sja1105_cfg_pad_mii {
 	u64 d32_os;
+	u64 d32_ih;
 	u64 d32_ipud;
+	u64 d10_ih;
 	u64 d10_os;
 	u64 d10_ipud;
 	u64 ctrl_os;
+	u64 ctrl_ih;
 	u64 ctrl_ipud;
 	u64 clk_os;
 	u64 clk_ih;
@@ -338,16 +342,19 @@ static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv,
 
 /* AGU */
 static void
-sja1105_cfg_pad_mii_tx_packing(void *buf, struct sja1105_cfg_pad_mii_tx *cmd,
-			       enum packing_op op)
+sja1105_cfg_pad_mii_packing(void *buf, struct sja1105_cfg_pad_mii *cmd,
+			    enum packing_op op)
 {
 	const int size = 4;
 
 	sja1105_packing(buf, &cmd->d32_os,   28, 27, size, op);
+	sja1105_packing(buf, &cmd->d32_ih,   26, 26, size, op);
 	sja1105_packing(buf, &cmd->d32_ipud, 25, 24, size, op);
 	sja1105_packing(buf, &cmd->d10_os,   20, 19, size, op);
+	sja1105_packing(buf, &cmd->d10_ih,   18, 18, size, op);
 	sja1105_packing(buf, &cmd->d10_ipud, 17, 16, size, op);
 	sja1105_packing(buf, &cmd->ctrl_os,  12, 11, size, op);
+	sja1105_packing(buf, &cmd->ctrl_ih,  10, 10, size, op);
 	sja1105_packing(buf, &cmd->ctrl_ipud, 9,  8, size, op);
 	sja1105_packing(buf, &cmd->clk_os,    4,  3, size, op);
 	sja1105_packing(buf, &cmd->clk_ih,    2,  2, size, op);
@@ -358,7 +365,7 @@ static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv,
 					   int port)
 {
 	const struct sja1105_regs *regs = priv->info->regs;
-	struct sja1105_cfg_pad_mii_tx pad_mii_tx;
+	struct sja1105_cfg_pad_mii pad_mii_tx = {0};
 	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
 
 	/* Payload */
@@ -375,12 +382,45 @@ static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv,
 	pad_mii_tx.clk_os    = 3; /* TX_CLK output stage */
 	pad_mii_tx.clk_ih    = 0; /* TX_CLK input hysteresis (default) */
 	pad_mii_tx.clk_ipud  = 2; /* TX_CLK input stage (default) */
-	sja1105_cfg_pad_mii_tx_packing(packed_buf, &pad_mii_tx, PACK);
+	sja1105_cfg_pad_mii_packing(packed_buf, &pad_mii_tx, PACK);
 
 	return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_tx[port],
 				packed_buf, SJA1105_SIZE_CGU_CMD);
 }
 
+static int sja1105_cfg_pad_rx_config(struct sja1105_private *priv, int port)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cfg_pad_mii pad_mii_rx = {0};
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+
+	/* Payload */
+	pad_mii_rx.d32_ih    = 0; /* RXD[3:2] input stage hysteresis: */
+				  /*          non-Schmitt (default) */
+	pad_mii_rx.d32_ipud  = 2; /* RXD[3:2] input weak pull-up/down */
+				  /*          plain input (default) */
+	pad_mii_rx.d10_ih    = 0; /* RXD[1:0] input stage hysteresis: */
+				  /*          non-Schmitt (default) */
+	pad_mii_rx.d10_ipud  = 2; /* RXD[1:0] input weak pull-up/down */
+				  /*          plain input (default) */
+	pad_mii_rx.ctrl_ih   = 0; /* RX_DV/CRS_DV/RX_CTL and RX_ER */
+				  /* input stage hysteresis: */
+				  /* non-Schmitt (default) */
+	pad_mii_rx.ctrl_ipud = 3; /* RX_DV/CRS_DV/RX_CTL and RX_ER */
+				  /* input stage weak pull-up/down: */
+				  /* pull-down */
+	pad_mii_rx.clk_os    = 2; /* RX_CLK/RXC output stage: */
+				  /* medium noise/fast speed (default) */
+	pad_mii_rx.clk_ih    = 0; /* RX_CLK/RXC input hysteresis: */
+				  /* non-Schmitt (default) */
+	pad_mii_rx.clk_ipud  = 2; /* RX_CLK/RXC input pull-up/down: */
+				  /* plain input (default) */
+	sja1105_cfg_pad_mii_packing(packed_buf, &pad_mii_rx, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_rx[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
 static void
 sja1105_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd,
 			       enum packing_op op)
@@ -669,10 +709,14 @@ int sja1105_clocking_setup_port(struct sja1105_private *priv, int port)
 			phy_mode);
 		return -EINVAL;
 	}
-	if (rc)
+	if (rc) {
 		dev_err(dev, "Clocking setup for port %d failed: %d\n",
 			port, rc);
-	return rc;
+		return rc;
+	}
+
+	/* Internally pull down the RX_DV/CRS_DV/RX_CTL and RX_ER inputs */
+	return sja1105_cfg_pad_rx_config(priv, port);
 }
 
 int sja1105_clocking_setup(struct sja1105_private *priv)
diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c
index 04bdb72ae6b6..43f14a5c2718 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -443,6 +443,7 @@ static struct sja1105_regs sja1105et_regs = {
 	.rgu = 0x100440,
 	/* UM10944.pdf, Table 86, ACU Register overview */
 	.pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
+	.pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809},
 	.rmii_pll1 = 0x10000A,
 	.cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
 	.mac = {0x200, 0x202, 0x204, 0x206, 0x208},
@@ -475,6 +476,7 @@ static struct sja1105_regs sja1105pqrs_regs = {
 	.rgu = 0x100440,
 	/* UM10944.pdf, Table 86, ACU Register overview */
 	.pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
+	.pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809},
 	.pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814},
 	.sgmii = 0x1F0000,
 	.rmii_pll1 = 0x10000A,
diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c
index b762176a1406..139d0120f511 100644
--- a/drivers/net/ethernet/3com/3c509.c
+++ b/drivers/net/ethernet/3com/3c509.c
@@ -85,7 +85,6 @@
 #include <linux/device.h>
 #include <linux/eisa.h>
 #include <linux/bitops.h>
-#include <linux/vermagic.h>
 
 #include <linux/uaccess.h>
 #include <asm/io.h>
diff --git a/drivers/net/ethernet/3com/3c515.c b/drivers/net/ethernet/3com/3c515.c
index 90312fcd6319..47b4215bb93b 100644
--- a/drivers/net/ethernet/3com/3c515.c
+++ b/drivers/net/ethernet/3com/3c515.c
@@ -22,7 +22,6 @@
 
 */
 
-#include <linux/vermagic.h>
 #define DRV_NAME		"3c515"
 
 #define CORKSCREW 1
diff --git a/drivers/net/ethernet/adaptec/starfire.c b/drivers/net/ethernet/adaptec/starfire.c
index 2db42211329f..a64191fc2af9 100644
--- a/drivers/net/ethernet/adaptec/starfire.c
+++ b/drivers/net/ethernet/adaptec/starfire.c
@@ -45,7 +45,6 @@
 #include <asm/processor.h>		/* Processor type for cache alignment. */
 #include <linux/uaccess.h>
 #include <asm/io.h>
-#include <linux/vermagic.h>
 
 /*
  * The current frame processor firmware fails to checksum a fragment
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h
index 97dfd0c67e84..9e1860d81908 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.h
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h
@@ -69,7 +69,7 @@
  * 16kB.
  */
 #if PAGE_SIZE > SZ_16K
-#define ENA_PAGE_SIZE SZ_16K
+#define ENA_PAGE_SIZE (_AC(SZ_16K, UL))
 #else
 #define ENA_PAGE_SIZE PAGE_SIZE
 #endif
diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
index 4e36122609a3..2ea11c71b85c 100644
--- a/drivers/net/ethernet/amd/atarilance.c
+++ b/drivers/net/ethernet/amd/atarilance.c
@@ -156,7 +156,7 @@ struct lance_memory {
 	struct lance_init_block	init;
 	struct lance_tx_head	tx_head[TX_RING_SIZE];
 	struct lance_rx_head	rx_head[RX_RING_SIZE];
-	char					packet_area[0];	/* packet data follow after the
+	char	packet_area[];	/* packet data follow after the
 											 * init block and the ring
 											 * descriptors and are located
 											 * at runtime */
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_macsec.c b/drivers/net/ethernet/aquantia/atlantic/aq_macsec.c
index 0b3e234a54aa..91870ceaf3fe 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_macsec.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_macsec.c
@@ -401,7 +401,7 @@ static u32 aq_sc_idx_max(const enum aq_macsec_sc_sa sc_sa)
 		break;
 	default:
 		break;
-	};
+	}
 
 	return result;
 }
@@ -417,7 +417,7 @@ static u32 aq_to_hw_sc_idx(const u32 sc_idx, const enum aq_macsec_sc_sa sc_sa)
 		return sc_idx;
 	default:
 		WARN_ONCE(true, "Invalid sc_sa");
-	};
+	}
 
 	return sc_idx;
 }
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
index 2edf137a7030..8a70ffe1d326 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
@@ -57,7 +57,7 @@ static const struct aq_board_revision_s hw_atl_boards[] = {
 	{ AQ_DEVICE_ID_D108,	AQ_HWREV_2,	&hw_atl_ops_b0, &hw_atl_b0_caps_aqc108, },
 	{ AQ_DEVICE_ID_D109,	AQ_HWREV_2,	&hw_atl_ops_b0, &hw_atl_b0_caps_aqc109, },
 
-	{ AQ_DEVICE_ID_AQC100,	AQ_HWREV_ANY,	&hw_atl_ops_b1, &hw_atl_b0_caps_aqc107, },
+	{ AQ_DEVICE_ID_AQC100,	AQ_HWREV_ANY,	&hw_atl_ops_b1, &hw_atl_b0_caps_aqc100, },
 	{ AQ_DEVICE_ID_AQC107,	AQ_HWREV_ANY,	&hw_atl_ops_b1, &hw_atl_b0_caps_aqc107, },
 	{ AQ_DEVICE_ID_AQC108,	AQ_HWREV_ANY,	&hw_atl_ops_b1, &hw_atl_b0_caps_aqc108, },
 	{ AQ_DEVICE_ID_AQC109,	AQ_HWREV_ANY,	&hw_atl_ops_b1, &hw_atl_b0_caps_aqc109, },
diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c
index 02b7705393ca..112edbd30823 100644
--- a/drivers/net/ethernet/atheros/ag71xx.c
+++ b/drivers/net/ethernet/atheros/ag71xx.c
@@ -871,13 +871,40 @@ static void ag71xx_mac_validate(struct phylink_config *config,
 			    unsigned long *supported,
 			    struct phylink_link_state *state)
 {
+	struct ag71xx *ag = netdev_priv(to_net_dev(config->dev));
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 
-	if (state->interface != PHY_INTERFACE_MODE_NA &&
-	    state->interface != PHY_INTERFACE_MODE_GMII &&
-	    state->interface != PHY_INTERFACE_MODE_MII) {
-		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-		return;
+	switch (state->interface) {
+	case PHY_INTERFACE_MODE_NA:
+		break;
+	case PHY_INTERFACE_MODE_MII:
+		if ((ag71xx_is(ag, AR9330) && ag->mac_idx == 0) ||
+		    ag71xx_is(ag, AR9340) ||
+		    ag71xx_is(ag, QCA9530) ||
+		    (ag71xx_is(ag, QCA9550) && ag->mac_idx == 1))
+			break;
+		goto unsupported;
+	case PHY_INTERFACE_MODE_GMII:
+		if ((ag71xx_is(ag, AR9330) && ag->mac_idx == 1) ||
+		    (ag71xx_is(ag, AR9340) && ag->mac_idx == 1) ||
+		    (ag71xx_is(ag, QCA9530) && ag->mac_idx == 1))
+			break;
+		goto unsupported;
+	case PHY_INTERFACE_MODE_SGMII:
+		if (ag71xx_is(ag, QCA9550) && ag->mac_idx == 0)
+			break;
+		goto unsupported;
+	case PHY_INTERFACE_MODE_RMII:
+		if (ag71xx_is(ag, AR9340) && ag->mac_idx == 0)
+			break;
+		goto unsupported;
+	case PHY_INTERFACE_MODE_RGMII:
+		if ((ag71xx_is(ag, AR9340) && ag->mac_idx == 0) ||
+		    (ag71xx_is(ag, QCA9550) && ag->mac_idx == 1))
+			break;
+		goto unsupported;
+	default:
+		goto unsupported;
 	}
 
 	phylink_set(mask, MII);
@@ -889,6 +916,8 @@ static void ag71xx_mac_validate(struct phylink_config *config,
 	phylink_set(mask, 100baseT_Full);
 
 	if (state->interface == PHY_INTERFACE_MODE_NA ||
+	    state->interface == PHY_INTERFACE_MODE_SGMII ||
+	    state->interface == PHY_INTERFACE_MODE_RGMII ||
 	    state->interface == PHY_INTERFACE_MODE_GMII) {
 		phylink_set(mask, 1000baseT_Full);
 		phylink_set(mask, 1000baseX_Full);
@@ -898,6 +927,10 @@ static void ag71xx_mac_validate(struct phylink_config *config,
 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
 	bitmap_and(state->advertising, state->advertising, mask,
 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+
+	return;
+unsupported:
+	bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
 }
 
 static void ag71xx_mac_pcs_get_state(struct phylink_config *config,
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index fead64f1ad90..d1a83716d934 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -6642,7 +6642,7 @@ static int bnxt_alloc_ctx_pg_tbls(struct bnxt *bp,
 	int rc;
 
 	if (!mem_size)
-		return 0;
+		return -EINVAL;
 
 	ctx_pg->nr_pages = DIV_ROUND_UP(mem_size, BNXT_PAGE_SIZE);
 	if (ctx_pg->nr_pages > MAX_CTX_TOTAL_PAGES) {
@@ -9780,6 +9780,7 @@ static netdev_features_t bnxt_fix_features(struct net_device *dev,
 					   netdev_features_t features)
 {
 	struct bnxt *bp = netdev_priv(dev);
+	netdev_features_t vlan_features;
 
 	if ((features & NETIF_F_NTUPLE) && !bnxt_rfs_capable(bp))
 		features &= ~NETIF_F_NTUPLE;
@@ -9796,12 +9797,14 @@ static netdev_features_t bnxt_fix_features(struct net_device *dev,
 	/* Both CTAG and STAG VLAN accelaration on the RX side have to be
 	 * turned on or off together.
 	 */
-	if ((features & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) !=
-	    (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) {
+	vlan_features = features & (NETIF_F_HW_VLAN_CTAG_RX |
+				    NETIF_F_HW_VLAN_STAG_RX);
+	if (vlan_features != (NETIF_F_HW_VLAN_CTAG_RX |
+			      NETIF_F_HW_VLAN_STAG_RX)) {
 		if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
 			features &= ~(NETIF_F_HW_VLAN_CTAG_RX |
 				      NETIF_F_HW_VLAN_STAG_RX);
-		else
+		else if (vlan_features)
 			features |= NETIF_F_HW_VLAN_CTAG_RX |
 				    NETIF_F_HW_VLAN_STAG_RX;
 	}
@@ -12212,12 +12215,15 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev)
 		bnxt_ulp_start(bp, err);
 	}
 
-	if (result != PCI_ERS_RESULT_RECOVERED && netif_running(netdev))
-		dev_close(netdev);
+	if (result != PCI_ERS_RESULT_RECOVERED) {
+		if (netif_running(netdev))
+			dev_close(netdev);
+		pci_disable_device(pdev);
+	}
 
 	rtnl_unlock();
 
-	return PCI_ERS_RESULT_RECOVERED;
+	return result;
 }
 
 /**
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index f2caa2756f5b..f6a3250ef1c5 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1066,7 +1066,6 @@ struct bnxt_vf_info {
 #define BNXT_VF_LINK_FORCED	0x4
 #define BNXT_VF_LINK_UP		0x8
 #define BNXT_VF_TRUST		0x10
-	u32	func_flags; /* func cfg flags */
 	u32	min_tx_rate;
 	u32	max_tx_rate;
 	void	*hwrm_cmd_req_addr;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
index 95f893f2a74d..d5c8bd49383a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
@@ -43,7 +43,7 @@ static inline void bnxt_link_bp_to_dl(struct bnxt *bp, struct devlink *dl)
 #define BNXT_NVM_CFG_VER_BITS		24
 #define BNXT_NVM_CFG_VER_BYTES		4
 
-#define BNXT_MSIX_VEC_MAX	1280
+#define BNXT_MSIX_VEC_MAX	512
 #define BNXT_MSIX_VEC_MIN_MAX	128
 
 enum bnxt_nvm_dir_type {
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
index 6ea3df6da18c..cea2f9958a1d 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
@@ -85,11 +85,10 @@ int bnxt_set_vf_spoofchk(struct net_device *dev, int vf_id, bool setting)
 	if (old_setting == setting)
 		return 0;
 
-	func_flags = vf->func_flags;
 	if (setting)
-		func_flags |= FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE;
+		func_flags = FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE;
 	else
-		func_flags |= FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE;
+		func_flags = FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE;
 	/*TODO: if the driver supports VLAN filter on guest VLAN,
 	 * the spoof check should also include vlan anti-spoofing
 	 */
@@ -98,7 +97,6 @@ int bnxt_set_vf_spoofchk(struct net_device *dev, int vf_id, bool setting)
 	req.flags = cpu_to_le32(func_flags);
 	rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
 	if (!rc) {
-		vf->func_flags = func_flags;
 		if (setting)
 			vf->flags |= BNXT_VF_SPOOFCHK;
 		else
@@ -228,7 +226,6 @@ int bnxt_set_vf_mac(struct net_device *dev, int vf_id, u8 *mac)
 	memcpy(vf->mac_addr, mac, ETH_ALEN);
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1);
 	req.fid = cpu_to_le16(vf->fw_fid);
-	req.flags = cpu_to_le32(vf->func_flags);
 	req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_MAC_ADDR);
 	memcpy(req.dflt_mac_addr, mac, ETH_ALEN);
 	return hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
@@ -266,7 +263,6 @@ int bnxt_set_vf_vlan(struct net_device *dev, int vf_id, u16 vlan_id, u8 qos,
 
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1);
 	req.fid = cpu_to_le16(vf->fw_fid);
-	req.flags = cpu_to_le32(vf->func_flags);
 	req.dflt_vlan = cpu_to_le16(vlan_tag);
 	req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_VLAN);
 	rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
@@ -305,7 +301,6 @@ int bnxt_set_vf_bw(struct net_device *dev, int vf_id, int min_tx_rate,
 		return 0;
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1);
 	req.fid = cpu_to_le16(vf->fw_fid);
-	req.flags = cpu_to_le32(vf->func_flags);
 	req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_MAX_BW);
 	req.max_bw = cpu_to_le32(max_tx_rate);
 	req.enables |= cpu_to_le32(FUNC_CFG_REQ_ENABLES_MIN_BW);
@@ -477,7 +472,6 @@ static void __bnxt_set_vf_params(struct bnxt *bp, int vf_id)
 	vf = &bp->pf.vf[vf_id];
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1);
 	req.fid = cpu_to_le16(vf->fw_fid);
-	req.flags = cpu_to_le32(vf->func_flags);
 
 	if (is_valid_ether_addr(vf->mac_addr)) {
 		req.enables |= cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_MAC_ADDR);
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 79636c78127c..351d0282f199 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -23,11 +23,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/pm.h>
 #include <linux/clk.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_net.h>
-#include <linux/of_platform.h>
 #include <net/arp.h>
 
 #include <linux/mii.h>
@@ -2710,9 +2705,8 @@ static void bcmgenet_umac_reset(struct bcmgenet_priv *priv)
 static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv,
 				 unsigned char *addr)
 {
-	bcmgenet_umac_writel(priv, (addr[0] << 24) | (addr[1] << 16) |
-			(addr[2] << 8) | addr[3], UMAC_MAC0);
-	bcmgenet_umac_writel(priv, (addr[4] << 8) | addr[5], UMAC_MAC1);
+	bcmgenet_umac_writel(priv, get_unaligned_be32(&addr[0]), UMAC_MAC0);
+	bcmgenet_umac_writel(priv, get_unaligned_be16(&addr[4]), UMAC_MAC1);
 }
 
 static void bcmgenet_get_hw_addr(struct bcmgenet_priv *priv,
@@ -2721,13 +2715,9 @@ static void bcmgenet_get_hw_addr(struct bcmgenet_priv *priv,
 	u32 addr_tmp;
 
 	addr_tmp = bcmgenet_umac_readl(priv, UMAC_MAC0);
-	addr[0] = addr_tmp >> 24;
-	addr[1] = (addr_tmp >> 16) & 0xff;
-	addr[2] = (addr_tmp >>	8) & 0xff;
-	addr[3] = addr_tmp & 0xff;
+	put_unaligned_be32(addr_tmp, &addr[0]);
 	addr_tmp = bcmgenet_umac_readl(priv, UMAC_MAC1);
-	addr[4] = (addr_tmp >> 8) & 0xff;
-	addr[5] = addr_tmp & 0xff;
+	put_unaligned_be16(addr_tmp, &addr[4]);
 }
 
 /* Returns a reusable dma control register value */
@@ -3421,8 +3411,6 @@ MODULE_DEVICE_TABLE(of, bcmgenet_match);
 static int bcmgenet_probe(struct platform_device *pdev)
 {
 	struct bcmgenet_platform_data *pd = pdev->dev.platform_data;
-	struct device_node *dn = pdev->dev.of_node;
-	const struct of_device_id *of_id = NULL;
 	const struct bcmgenet_plat_data *pdata;
 	struct bcmgenet_priv *priv;
 	struct net_device *dev;
@@ -3437,12 +3425,6 @@ static int bcmgenet_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	if (dn) {
-		of_id = of_match_node(bcmgenet_match, dn);
-		if (!of_id)
-			return -EINVAL;
-	}
-
 	priv = netdev_priv(dev);
 	priv->irq0 = platform_get_irq(pdev, 0);
 	if (priv->irq0 < 0) {
@@ -3504,13 +3486,16 @@ static int bcmgenet_probe(struct platform_device *pdev)
 		priv->dma_max_burst_length = DMA_MAX_BURST_LENGTH;
 	}
 
-	priv->clk = devm_clk_get(&priv->pdev->dev, "enet");
+	priv->clk = devm_clk_get_optional(&priv->pdev->dev, "enet");
 	if (IS_ERR(priv->clk)) {
 		dev_dbg(&priv->pdev->dev, "failed to get enet clock\n");
-		priv->clk = NULL;
+		err = PTR_ERR(priv->clk);
+		goto err;
 	}
 
-	clk_prepare_enable(priv->clk);
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		goto err;
 
 	bcmgenet_set_hw_params(priv);
 
@@ -3528,16 +3513,18 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	priv->rx_buf_len = RX_BUF_LENGTH;
 	INIT_WORK(&priv->bcmgenet_irq_work, bcmgenet_irq_task);
 
-	priv->clk_wol = devm_clk_get(&priv->pdev->dev, "enet-wol");
+	priv->clk_wol = devm_clk_get_optional(&priv->pdev->dev, "enet-wol");
 	if (IS_ERR(priv->clk_wol)) {
 		dev_dbg(&priv->pdev->dev, "failed to get enet-wol clock\n");
-		priv->clk_wol = NULL;
+		err = PTR_ERR(priv->clk_wol);
+		goto err;
 	}
 
-	priv->clk_eee = devm_clk_get(&priv->pdev->dev, "enet-eee");
+	priv->clk_eee = devm_clk_get_optional(&priv->pdev->dev, "enet-eee");
 	if (IS_ERR(priv->clk_eee)) {
 		dev_dbg(&priv->pdev->dev, "failed to get enet-eee clock\n");
-		priv->clk_eee = NULL;
+		err = PTR_ERR(priv->clk_eee);
+		goto err;
 	}
 
 	/* If this is an internal GPHY, power it on now, before UniMAC is
@@ -3546,7 +3533,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	if (device_get_phy_mode(&pdev->dev) == PHY_INTERFACE_MODE_INTERNAL)
 		bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
 
-	if ((pd) && (!IS_ERR_OR_NULL(pd->mac_address)))
+	if (pd && !IS_ERR_OR_NULL(pd->mac_address))
 		ether_addr_copy(dev->dev_addr, pd->mac_address);
 	else
 		if (!device_get_mac_address(&pdev->dev, dev->dev_addr, ETH_ALEN))
@@ -3744,7 +3731,7 @@ static struct platform_driver bcmgenet_driver = {
 		.name	= "bcmgenet",
 		.of_match_table = bcmgenet_match,
 		.pm	= &bcmgenet_pm_ops,
-		.acpi_match_table = ACPI_PTR(genet_acpi_match),
+		.acpi_match_table = genet_acpi_match,
 	},
 };
 module_platform_driver(bcmgenet_driver);
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_device.h b/drivers/net/ethernet/cavium/liquidio/octeon_device.h
index 3d01d3602d8f..fb380b4f3e02 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_device.h
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_device.h
@@ -712,18 +712,6 @@ struct octeon_device *lio_get_device(u32 octeon_id);
  */
 int lio_get_device_id(void *dev);
 
-static inline u16 OCTEON_MAJOR_REV(struct octeon_device *oct)
-{
-	u16 rev = (oct->rev_id & 0xC) >> 2;
-
-	return (rev == 0) ? 1 : rev;
-}
-
-static inline u16 OCTEON_MINOR_REV(struct octeon_device *oct)
-{
-	return oct->rev_id & 0x3;
-}
-
 /** Read windowed register.
  *  @param  oct   -  pointer to the Octeon device.
  *  @param  addr  -  Address of the register to read.
diff --git a/drivers/net/ethernet/dnet.c b/drivers/net/ethernet/dnet.c
index 057a508dd6e2..db98274501a0 100644
--- a/drivers/net/ethernet/dnet.c
+++ b/drivers/net/ethernet/dnet.c
@@ -776,8 +776,7 @@ static int dnet_probe(struct platform_device *pdev)
 
 	spin_lock_init(&bp->lock);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	bp->regs = devm_ioremap_resource(&pdev->dev, res);
+	bp->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(bp->regs)) {
 		err = PTR_ERR(bp->regs);
 		goto err_out_free_dev;
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
index a9afe46b837f..0a31e4268dfb 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
@@ -127,16 +127,19 @@ static int dpaa2_dbg_ch_show(struct seq_file *file, void *offset)
 	int i;
 
 	seq_printf(file, "Channel stats for %s:\n", priv->net_dev->name);
-	seq_printf(file, "%s%16s%16s%16s%16s\n",
-		   "CHID", "CPU", "Deq busy", "CDANs", "Buf count");
+	seq_printf(file, "%s%16s%16s%16s%16s%16s%16s\n",
+		   "CHID", "CPU", "Deq busy", "Frames", "CDANs",
+		   "Avg Frm/CDAN", "Buf count");
 
 	for (i = 0; i < priv->num_channels; i++) {
 		ch = priv->channel[i];
-		seq_printf(file, "%4d%16d%16llu%16llu%16d\n",
+		seq_printf(file, "%4d%16d%16llu%16llu%16llu%16llu%16d\n",
 			   ch->ch_id,
 			   ch->nctx.desired_cpu,
 			   ch->stats.dequeue_portal_busy,
+			   ch->stats.frames,
 			   ch->stats.cdan,
+			   div64_u64(ch->stats.frames, ch->stats.cdan),
 			   ch->buf_count);
 	}
 
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index b6c46639aa4c..8ec435ba7d27 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /* Copyright 2014-2016 Freescale Semiconductor Inc.
- * Copyright 2016-2019 NXP
+ * Copyright 2016-2020 NXP
  */
 #include <linux/init.h>
 #include <linux/module.h>
@@ -268,7 +268,7 @@ static int xdp_enqueue(struct dpaa2_eth_priv *priv, struct dpaa2_fd *fd,
 
 	fq = &priv->fq[queue_id];
 	for (i = 0; i < DPAA2_ETH_ENQUEUE_RETRIES; i++) {
-		err = priv->enqueue(priv, fq, fd, 0);
+		err = priv->enqueue(priv, fq, fd, 0, 1, NULL);
 		if (err != -EBUSY)
 			break;
 	}
@@ -493,6 +493,7 @@ static int consume_frames(struct dpaa2_eth_channel *ch,
 		return 0;
 
 	fq->stats.frames += cleaned;
+	ch->stats.frames += cleaned;
 
 	/* A dequeue operation only pulls frames from a single queue
 	 * into the store. Return the frame queue as an out param.
@@ -847,7 +848,7 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)
 	 * the Tx confirmation callback for this frame
 	 */
 	for (i = 0; i < DPAA2_ETH_ENQUEUE_RETRIES; i++) {
-		err = priv->enqueue(priv, fq, &fd, prio);
+		err = priv->enqueue(priv, fq, &fd, prio, 1, NULL);
 		if (err != -EBUSY)
 			break;
 	}
@@ -1880,20 +1881,16 @@ static int dpaa2_eth_xdp(struct net_device *dev, struct netdev_bpf *xdp)
 	return 0;
 }
 
-static int dpaa2_eth_xdp_xmit_frame(struct net_device *net_dev,
-				    struct xdp_frame *xdpf)
+static int dpaa2_eth_xdp_create_fd(struct net_device *net_dev,
+				   struct xdp_frame *xdpf,
+				   struct dpaa2_fd *fd)
 {
 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
 	struct device *dev = net_dev->dev.parent;
-	struct rtnl_link_stats64 *percpu_stats;
-	struct dpaa2_eth_drv_stats *percpu_extras;
 	unsigned int needed_headroom;
 	struct dpaa2_eth_swa *swa;
-	struct dpaa2_eth_fq *fq;
-	struct dpaa2_fd fd;
 	void *buffer_start, *aligned_start;
 	dma_addr_t addr;
-	int err, i;
 
 	/* We require a minimum headroom to be able to transmit the frame.
 	 * Otherwise return an error and let the original net_device handle it
@@ -1902,11 +1899,8 @@ static int dpaa2_eth_xdp_xmit_frame(struct net_device *net_dev,
 	if (xdpf->headroom < needed_headroom)
 		return -EINVAL;
 
-	percpu_stats = this_cpu_ptr(priv->percpu_stats);
-	percpu_extras = this_cpu_ptr(priv->percpu_extras);
-
 	/* Setup the FD fields */
-	memset(&fd, 0, sizeof(fd));
+	memset(fd, 0, sizeof(*fd));
 
 	/* Align FD address, if possible */
 	buffer_start = xdpf->data - needed_headroom;
@@ -1924,32 +1918,14 @@ static int dpaa2_eth_xdp_xmit_frame(struct net_device *net_dev,
 	addr = dma_map_single(dev, buffer_start,
 			      swa->xdp.dma_size,
 			      DMA_BIDIRECTIONAL);
-	if (unlikely(dma_mapping_error(dev, addr))) {
-		percpu_stats->tx_dropped++;
+	if (unlikely(dma_mapping_error(dev, addr)))
 		return -ENOMEM;
-	}
-
-	dpaa2_fd_set_addr(&fd, addr);
-	dpaa2_fd_set_offset(&fd, xdpf->data - buffer_start);
-	dpaa2_fd_set_len(&fd, xdpf->len);
-	dpaa2_fd_set_format(&fd, dpaa2_fd_single);
-	dpaa2_fd_set_ctrl(&fd, FD_CTRL_PTA);
 
-	fq = &priv->fq[smp_processor_id() % dpaa2_eth_queue_count(priv)];
-	for (i = 0; i < DPAA2_ETH_ENQUEUE_RETRIES; i++) {
-		err = priv->enqueue(priv, fq, &fd, 0);
-		if (err != -EBUSY)
-			break;
-	}
-	percpu_extras->tx_portal_busy += i;
-	if (unlikely(err < 0)) {
-		percpu_stats->tx_errors++;
-		/* let the Rx device handle the cleanup */
-		return err;
-	}
-
-	percpu_stats->tx_packets++;
-	percpu_stats->tx_bytes += dpaa2_fd_get_len(&fd);
+	dpaa2_fd_set_addr(fd, addr);
+	dpaa2_fd_set_offset(fd, xdpf->data - buffer_start);
+	dpaa2_fd_set_len(fd, xdpf->len);
+	dpaa2_fd_set_format(fd, dpaa2_fd_single);
+	dpaa2_fd_set_ctrl(fd, FD_CTRL_PTA);
 
 	return 0;
 }
@@ -1957,8 +1933,13 @@ static int dpaa2_eth_xdp_xmit_frame(struct net_device *net_dev,
 static int dpaa2_eth_xdp_xmit(struct net_device *net_dev, int n,
 			      struct xdp_frame **frames, u32 flags)
 {
-	int drops = 0;
-	int i, err;
+	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+	int total_enqueued = 0, retries = 0, enqueued;
+	struct dpaa2_eth_drv_stats *percpu_extras;
+	struct rtnl_link_stats64 *percpu_stats;
+	int num_fds, i, err, max_retries;
+	struct dpaa2_eth_fq *fq;
+	struct dpaa2_fd *fds;
 
 	if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
 		return -EINVAL;
@@ -1966,17 +1947,40 @@ static int dpaa2_eth_xdp_xmit(struct net_device *net_dev, int n,
 	if (!netif_running(net_dev))
 		return -ENETDOWN;
 
+	fq = &priv->fq[smp_processor_id()];
+	fds = fq->xdp_fds;
+
+	percpu_stats = this_cpu_ptr(priv->percpu_stats);
+	percpu_extras = this_cpu_ptr(priv->percpu_extras);
+
+	/* create a FD for each xdp_frame in the list received */
 	for (i = 0; i < n; i++) {
-		struct xdp_frame *xdpf = frames[i];
+		err = dpaa2_eth_xdp_create_fd(net_dev, frames[i], &fds[i]);
+		if (err)
+			break;
+	}
+	num_fds = i;
 
-		err = dpaa2_eth_xdp_xmit_frame(net_dev, xdpf);
-		if (err) {
-			xdp_return_frame_rx_napi(xdpf);
-			drops++;
+	/* try to enqueue all the FDs until the max number of retries is hit */
+	max_retries = num_fds * DPAA2_ETH_ENQUEUE_RETRIES;
+	while (total_enqueued < num_fds && retries < max_retries) {
+		err = priv->enqueue(priv, fq, &fds[total_enqueued],
+				    0, num_fds - total_enqueued, &enqueued);
+		if (err == -EBUSY) {
+			percpu_extras->tx_portal_busy += ++retries;
+			continue;
 		}
+		total_enqueued += enqueued;
 	}
 
-	return n - drops;
+	/* update statistics */
+	percpu_stats->tx_packets += total_enqueued;
+	for (i = 0; i < total_enqueued; i++)
+		percpu_stats->tx_bytes += dpaa2_fd_get_len(&fds[i]);
+	for (i = total_enqueued; i < n; i++)
+		xdp_return_frame_rx_napi(frames[i]);
+
+	return total_enqueued;
 }
 
 static int update_xps(struct dpaa2_eth_priv *priv)
@@ -2018,7 +2022,7 @@ static int dpaa2_eth_setup_tc(struct net_device *net_dev,
 	int i;
 
 	if (type != TC_SETUP_QDISC_MQPRIO)
-		return -EINVAL;
+		return -EOPNOTSUPP;
 
 	mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
 	num_queues = dpaa2_eth_queue_count(priv);
@@ -2030,7 +2034,7 @@ static int dpaa2_eth_setup_tc(struct net_device *net_dev,
 	if (num_tc  > dpaa2_eth_tc_count(priv)) {
 		netdev_err(net_dev, "Max %d traffic classes supported\n",
 			   dpaa2_eth_tc_count(priv));
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	if (!num_tc) {
@@ -2523,19 +2527,38 @@ static int set_buffer_layout(struct dpaa2_eth_priv *priv)
 
 static inline int dpaa2_eth_enqueue_qd(struct dpaa2_eth_priv *priv,
 				       struct dpaa2_eth_fq *fq,
-				       struct dpaa2_fd *fd, u8 prio)
+				       struct dpaa2_fd *fd, u8 prio,
+				       u32 num_frames __always_unused,
+				       int *frames_enqueued)
 {
-	return dpaa2_io_service_enqueue_qd(fq->channel->dpio,
-					   priv->tx_qdid, prio,
-					   fq->tx_qdbin, fd);
+	int err;
+
+	err = dpaa2_io_service_enqueue_qd(fq->channel->dpio,
+					  priv->tx_qdid, prio,
+					  fq->tx_qdbin, fd);
+	if (!err && frames_enqueued)
+		*frames_enqueued = 1;
+	return err;
 }
 
-static inline int dpaa2_eth_enqueue_fq(struct dpaa2_eth_priv *priv,
-				       struct dpaa2_eth_fq *fq,
-				       struct dpaa2_fd *fd, u8 prio)
+static inline int dpaa2_eth_enqueue_fq_multiple(struct dpaa2_eth_priv *priv,
+						struct dpaa2_eth_fq *fq,
+						struct dpaa2_fd *fd,
+						u8 prio, u32 num_frames,
+						int *frames_enqueued)
 {
-	return dpaa2_io_service_enqueue_fq(fq->channel->dpio,
-					   fq->tx_fqid[prio], fd);
+	int err;
+
+	err = dpaa2_io_service_enqueue_multiple_fq(fq->channel->dpio,
+						   fq->tx_fqid[prio],
+						   fd, num_frames);
+
+	if (err == 0)
+		return -EBUSY;
+
+	if (frames_enqueued)
+		*frames_enqueued = err;
+	return 0;
 }
 
 static void set_enqueue_mode(struct dpaa2_eth_priv *priv)
@@ -2544,7 +2567,7 @@ static void set_enqueue_mode(struct dpaa2_eth_priv *priv)
 				   DPNI_ENQUEUE_FQID_VER_MINOR) < 0)
 		priv->enqueue = dpaa2_eth_enqueue_qd;
 	else
-		priv->enqueue = dpaa2_eth_enqueue_fq;
+		priv->enqueue = dpaa2_eth_enqueue_fq_multiple;
 }
 
 static int set_pause(struct dpaa2_eth_priv *priv)
@@ -2605,7 +2628,7 @@ static void update_tx_fqids(struct dpaa2_eth_priv *priv)
 		}
 	}
 
-	priv->enqueue = dpaa2_eth_enqueue_fq;
+	priv->enqueue = dpaa2_eth_enqueue_fq_multiple;
 
 	return;
 
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
index 7635db3ef903..43cd8409f2e9 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
 /* Copyright 2014-2016 Freescale Semiconductor Inc.
- * Copyright 2016 NXP
+ * Copyright 2016-2020 NXP
  */
 
 #ifndef __DPAA2_ETH_H
@@ -288,6 +288,8 @@ struct dpaa2_eth_ch_stats {
 	__u64 xdp_tx;
 	__u64 xdp_tx_err;
 	__u64 xdp_redirect;
+	/* Must be last, does not show up in ethtool stats */
+	__u64 frames;
 };
 
 /* Maximum number of queues associated with a DPNI */
@@ -325,6 +327,8 @@ struct dpaa2_eth_fq {
 			const struct dpaa2_fd *fd,
 			struct dpaa2_eth_fq *fq);
 	struct dpaa2_eth_fq_stats stats;
+
+	struct dpaa2_fd xdp_fds[DEV_MAP_BULK_SIZE];
 };
 
 struct dpaa2_eth_ch_xdp {
@@ -371,7 +375,9 @@ struct dpaa2_eth_priv {
 	struct dpaa2_eth_fq fq[DPAA2_ETH_MAX_QUEUES];
 	int (*enqueue)(struct dpaa2_eth_priv *priv,
 		       struct dpaa2_eth_fq *fq,
-		       struct dpaa2_fd *fd, u8 prio);
+		       struct dpaa2_fd *fd, u8 prio,
+		       u32 num_frames,
+		       int *frames_enqueued);
 
 	u8 num_channels;
 	struct dpaa2_eth_channel *channel[DPAA2_ETH_MAX_DPCONS];
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
index 94347c695233..bd13ee48d623 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
@@ -277,7 +277,7 @@ static void dpaa2_eth_get_ethtool_stats(struct net_device *net_dev,
 	/* Per-channel stats */
 	for (k = 0; k < priv->num_channels; k++) {
 		ch_stats = &priv->channel[k]->stats;
-		for (j = 0; j < sizeof(*ch_stats) / sizeof(__u64); j++)
+		for (j = 0; j < sizeof(*ch_stats) / sizeof(__u64) - 1; j++)
 			*((__u64 *)data + i + j) += *((__u64 *)ch_stats + j);
 	}
 	i += j;
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 85e2b741df41..de1ad4975074 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -50,21 +50,6 @@ static void enetc_set_vlan_promisc(struct enetc_hw *hw, char si_map)
 	enetc_port_wr(hw, ENETC_PSIPVMR, ENETC_PSIPVMR_SET_VP(si_map) | val);
 }
 
-static bool enetc_si_vlan_promisc_is_on(struct enetc_pf *pf, int si_idx)
-{
-	return pf->vlan_promisc_simap & BIT(si_idx);
-}
-
-static bool enetc_vlan_filter_is_on(struct enetc_pf *pf)
-{
-	int i;
-
-	for_each_set_bit(i, pf->active_vlans, VLAN_N_VID)
-		return true;
-
-	return false;
-}
-
 static void enetc_enable_si_vlan_promisc(struct enetc_pf *pf, int si_idx)
 {
 	pf->vlan_promisc_simap |= BIT(si_idx);
@@ -204,6 +189,7 @@ static void enetc_pf_set_rx_mode(struct net_device *ndev)
 {
 	struct enetc_ndev_priv *priv = netdev_priv(ndev);
 	struct enetc_pf *pf = enetc_si_priv(priv->si);
+	char vlan_promisc_simap = pf->vlan_promisc_simap;
 	struct enetc_hw *hw = &priv->si->hw;
 	bool uprom = false, mprom = false;
 	struct enetc_mac_filter *filter;
@@ -216,16 +202,16 @@ static void enetc_pf_set_rx_mode(struct net_device *ndev)
 		psipmr = ENETC_PSIPMR_SET_UP(0) | ENETC_PSIPMR_SET_MP(0);
 		uprom = true;
 		mprom = true;
-		/* enable VLAN promisc mode for SI0 */
-		if (!enetc_si_vlan_promisc_is_on(pf, 0))
-			enetc_enable_si_vlan_promisc(pf, 0);
-
+		/* Enable VLAN promiscuous mode for SI0 (PF) */
+		vlan_promisc_simap |= BIT(0);
 	} else if (ndev->flags & IFF_ALLMULTI) {
 		/* enable multi cast promisc mode for SI0 (PF) */
 		psipmr = ENETC_PSIPMR_SET_MP(0);
 		mprom = true;
 	}
 
+	enetc_set_vlan_promisc(&pf->si->hw, vlan_promisc_simap);
+
 	/* first 2 filter entries belong to PF */
 	if (!uprom) {
 		/* Update unicast filters */
@@ -306,9 +292,6 @@ static int enetc_vlan_rx_add_vid(struct net_device *ndev, __be16 prot, u16 vid)
 	struct enetc_pf *pf = enetc_si_priv(priv->si);
 	int idx;
 
-	if (enetc_si_vlan_promisc_is_on(pf, 0))
-		enetc_disable_si_vlan_promisc(pf, 0);
-
 	__set_bit(vid, pf->active_vlans);
 
 	idx = enetc_vid_hash_idx(vid);
@@ -326,9 +309,6 @@ static int enetc_vlan_rx_del_vid(struct net_device *ndev, __be16 prot, u16 vid)
 	__clear_bit(vid, pf->active_vlans);
 	enetc_sync_vlan_ht_filter(pf, true);
 
-	if (!enetc_vlan_filter_is_on(pf))
-		enetc_enable_si_vlan_promisc(pf, 0);
-
 	return 0;
 }
 
@@ -677,6 +657,15 @@ static int enetc_pf_set_features(struct net_device *ndev,
 		enetc_enable_txvlan(&priv->si->hw, 0,
 				    !!(features & NETIF_F_HW_VLAN_CTAG_TX));
 
+	if (changed & NETIF_F_HW_VLAN_CTAG_FILTER) {
+		struct enetc_pf *pf = enetc_si_priv(priv->si);
+
+		if (!!(features & NETIF_F_HW_VLAN_CTAG_FILTER))
+			enetc_disable_si_vlan_promisc(pf, 0);
+		else
+			enetc_enable_si_vlan_promisc(pf, 0);
+	}
+
 	if (changed & NETIF_F_LOOPBACK)
 		enetc_set_loopback(ndev, !!(features & NETIF_F_LOOPBACK));
 
@@ -719,12 +708,11 @@ static void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
 
 	ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM | NETIF_F_HW_CSUM |
 			    NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
-			    NETIF_F_LOOPBACK;
+			    NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_LOOPBACK;
 	ndev->features = NETIF_F_HIGHDMA | NETIF_F_SG |
 			 NETIF_F_RXCSUM | NETIF_F_HW_CSUM |
 			 NETIF_F_HW_VLAN_CTAG_TX |
-			 NETIF_F_HW_VLAN_CTAG_RX |
-			 NETIF_F_HW_VLAN_CTAG_FILTER;
+			 NETIF_F_HW_VLAN_CTAG_RX;
 
 	if (si->num_rss)
 		ndev->hw_features |= NETIF_F_RXHASH;
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index e74dd1f86bba..a6cdd5b61921 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -376,8 +376,7 @@ struct bufdesc_ex {
 #define FEC_ENET_TS_AVAIL       ((uint)0x00010000)
 #define FEC_ENET_TS_TIMER       ((uint)0x00008000)
 
-#define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII)
-#define FEC_NAPI_IMASK	FEC_ENET_MII
+#define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF)
 #define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF))
 
 /* ENET interrupt coalescing macro define */
@@ -543,7 +542,6 @@ struct fec_enet_private {
 	int	link;
 	int	full_duplex;
 	int	speed;
-	struct	completion mdio_done;
 	int	irq[FEC_IRQ_NUM];
 	bool	bufdesc_ex;
 	int	pause_flag;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index dc6f8763a5d4..1ae075a246a3 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -976,8 +976,8 @@ fec_restart(struct net_device *ndev)
 	writel((__force u32)cpu_to_be32(temp_mac[1]),
 	       fep->hwp + FEC_ADDR_HIGH);
 
-	/* Clear any outstanding interrupt. */
-	writel(0xffffffff, fep->hwp + FEC_IEVENT);
+	/* Clear any outstanding interrupt, except MDIO. */
+	writel((0xffffffff & ~FEC_ENET_MII), fep->hwp + FEC_IEVENT);
 
 	fec_enet_bd_init(ndev);
 
@@ -1123,7 +1123,7 @@ fec_restart(struct net_device *ndev)
 	if (fep->link)
 		writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
 	else
-		writel(FEC_ENET_MII, fep->hwp + FEC_IMASK);
+		writel(0, fep->hwp + FEC_IMASK);
 
 	/* Init the interrupt coalescing */
 	fec_enet_itr_coal_init(ndev);
@@ -1652,6 +1652,10 @@ fec_enet_interrupt(int irq, void *dev_id)
 	irqreturn_t ret = IRQ_NONE;
 
 	int_events = readl(fep->hwp + FEC_IEVENT);
+
+	/* Don't clear MDIO events, we poll for those */
+	int_events &= ~FEC_ENET_MII;
+
 	writel(int_events, fep->hwp + FEC_IEVENT);
 	fec_enet_collect_events(fep, int_events);
 
@@ -1659,16 +1663,12 @@ fec_enet_interrupt(int irq, void *dev_id)
 		ret = IRQ_HANDLED;
 
 		if (napi_schedule_prep(&fep->napi)) {
-			/* Disable the NAPI interrupts */
-			writel(FEC_NAPI_IMASK, fep->hwp + FEC_IMASK);
+			/* Disable interrupts */
+			writel(0, fep->hwp + FEC_IMASK);
 			__napi_schedule(&fep->napi);
 		}
 	}
 
-	if (int_events & FEC_ENET_MII) {
-		ret = IRQ_HANDLED;
-		complete(&fep->mdio_done);
-	}
 	return ret;
 }
 
@@ -1818,11 +1818,24 @@ static void fec_enet_adjust_link(struct net_device *ndev)
 		phy_print_status(phy_dev);
 }
 
+static int fec_enet_mdio_wait(struct fec_enet_private *fep)
+{
+	uint ievent;
+	int ret;
+
+	ret = readl_poll_timeout_atomic(fep->hwp + FEC_IEVENT, ievent,
+					ievent & FEC_ENET_MII, 2, 30000);
+
+	if (!ret)
+		writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
+
+	return ret;
+}
+
 static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 {
 	struct fec_enet_private *fep = bus->priv;
 	struct device *dev = &fep->pdev->dev;
-	unsigned long time_left;
 	int ret = 0, frame_start, frame_addr, frame_op;
 	bool is_c45 = !!(regnum & MII_ADDR_C45);
 
@@ -1830,8 +1843,6 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 	if (ret < 0)
 		return ret;
 
-	reinit_completion(&fep->mdio_done);
-
 	if (is_c45) {
 		frame_start = FEC_MMFR_ST_C45;
 
@@ -1843,11 +1854,9 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 		       fep->hwp + FEC_MII_DATA);
 
 		/* wait for end of transfer */
-		time_left = wait_for_completion_timeout(&fep->mdio_done,
-				usecs_to_jiffies(FEC_MII_TIMEOUT));
-		if (time_left == 0) {
+		ret = fec_enet_mdio_wait(fep);
+		if (ret) {
 			netdev_err(fep->netdev, "MDIO address write timeout\n");
-			ret = -ETIMEDOUT;
 			goto out;
 		}
 
@@ -1866,11 +1875,9 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 		FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
 
 	/* wait for end of transfer */
-	time_left = wait_for_completion_timeout(&fep->mdio_done,
-			usecs_to_jiffies(FEC_MII_TIMEOUT));
-	if (time_left == 0) {
+	ret = fec_enet_mdio_wait(fep);
+	if (ret) {
 		netdev_err(fep->netdev, "MDIO read timeout\n");
-		ret = -ETIMEDOUT;
 		goto out;
 	}
 
@@ -1888,7 +1895,6 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 {
 	struct fec_enet_private *fep = bus->priv;
 	struct device *dev = &fep->pdev->dev;
-	unsigned long time_left;
 	int ret, frame_start, frame_addr;
 	bool is_c45 = !!(regnum & MII_ADDR_C45);
 
@@ -1898,8 +1904,6 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	else
 		ret = 0;
 
-	reinit_completion(&fep->mdio_done);
-
 	if (is_c45) {
 		frame_start = FEC_MMFR_ST_C45;
 
@@ -1911,11 +1915,9 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 		       fep->hwp + FEC_MII_DATA);
 
 		/* wait for end of transfer */
-		time_left = wait_for_completion_timeout(&fep->mdio_done,
-			usecs_to_jiffies(FEC_MII_TIMEOUT));
-		if (time_left == 0) {
+		ret = fec_enet_mdio_wait(fep);
+		if (ret) {
 			netdev_err(fep->netdev, "MDIO address write timeout\n");
-			ret = -ETIMEDOUT;
 			goto out;
 		}
 	} else {
@@ -1931,12 +1933,9 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 		fep->hwp + FEC_MII_DATA);
 
 	/* wait for end of transfer */
-	time_left = wait_for_completion_timeout(&fep->mdio_done,
-			usecs_to_jiffies(FEC_MII_TIMEOUT));
-	if (time_left == 0) {
+	ret = fec_enet_mdio_wait(fep);
+	if (ret)
 		netdev_err(fep->netdev, "MDIO write timeout\n");
-		ret  = -ETIMEDOUT;
-	}
 
 out:
 	pm_runtime_mark_last_busy(dev);
@@ -2065,9 +2064,11 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	static struct mii_bus *fec0_mii_bus;
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
+	bool suppress_preamble = false;
 	struct device_node *node;
 	int err = -ENXIO;
 	u32 mii_speed, holdtime;
+	u32 bus_freq;
 
 	/*
 	 * The i.MX28 dual fec interfaces are not equal.
@@ -2095,15 +2096,23 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
+	bus_freq = 2500000; /* 2.5MHz by default */
+	node = of_get_child_by_name(pdev->dev.of_node, "mdio");
+	if (node) {
+		of_property_read_u32(node, "clock-frequency", &bus_freq);
+		suppress_preamble = of_property_read_bool(node,
+							  "suppress-preamble");
+	}
+
 	/*
-	 * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
+	 * Set MII speed (= clk_get_rate() / 2 * phy_speed)
 	 *
 	 * The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while
 	 * for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'.  The i.MX28
 	 * Reference Manual has an error on this, and gets fixed on i.MX6Q
 	 * document.
 	 */
-	mii_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), 5000000);
+	mii_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), bus_freq * 2);
 	if (fep->quirks & FEC_QUIRK_ENET_MAC)
 		mii_speed--;
 	if (mii_speed > 63) {
@@ -2130,8 +2139,14 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 
 	fep->phy_speed = mii_speed << 1 | holdtime << 8;
 
+	if (suppress_preamble)
+		fep->phy_speed |= BIT(7);
+
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
+	/* Clear any pending transaction complete indication */
+	writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
+
 	fep->mii_bus = mdiobus_alloc();
 	if (fep->mii_bus == NULL) {
 		err = -ENOMEM;
@@ -2146,7 +2161,6 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	fep->mii_bus->priv = fep;
 	fep->mii_bus->parent = &pdev->dev;
 
-	node = of_get_child_by_name(pdev->dev.of_node, "mdio");
 	err = of_mdiobus_register(fep->mii_bus, node);
 	of_node_put(node);
 	if (err)
@@ -3674,7 +3688,6 @@ fec_probe(struct platform_device *pdev)
 		fep->irq[i] = irq;
 	}
 
-	init_completion(&fep->mdio_done);
 	ret = fec_enet_mii_init(pdev);
 	if (ret)
 		goto failed_mii_init;
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 8aace2de0cc9..9a907947ba19 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -697,9 +697,9 @@ hns_mac_register_phydev(struct mii_bus *mdio, struct hns_mac_cb *mac_cb,
 		return rc;
 
 	if (!strcmp(phy_type, phy_modes(PHY_INTERFACE_MODE_XGMII)))
-		is_c45 = 1;
+		is_c45 = true;
 	else if (!strcmp(phy_type, phy_modes(PHY_INTERFACE_MODE_SGMII)))
-		is_c45 = 0;
+		is_c45 = false;
 	else
 		return -ENODATA;
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
index 948e67ef30fd..21a736174fda 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
@@ -45,6 +45,7 @@ enum HCLGE_MBX_OPCODE {
 	HCLGE_MBX_GET_MEDIA_TYPE,       /* (VF -> PF) get media type */
 	HCLGE_MBX_PUSH_PROMISC_INFO,	/* (PF -> VF) push vf promisc info */
 	HCLGE_MBX_VF_UNINIT,            /* (VF -> PF) vf is unintializing */
+	HCLGE_MBX_HANDLE_VF_TBL,	/* (VF -> PF) store/clear hw table */
 
 	HCLGE_MBX_GET_VF_FLR_STATUS = 200, /* (M7 -> PF) get vf flr status */
 	HCLGE_MBX_PUSH_LINK_STATUS,	/* (M7 -> PF) get port link status */
@@ -70,6 +71,10 @@ enum hclge_mbx_vlan_cfg_subcode {
 	HCLGE_MBX_GET_PORT_BASE_VLAN_STATE,	/* get port based vlan state */
 };
 
+enum hclge_mbx_tbl_cfg_subcode {
+	HCLGE_MBX_VPORT_LIST_CLEAR,
+};
+
 #define HCLGE_MBX_MAX_MSG_SIZE	14
 #define HCLGE_MBX_MAX_RESP_DATA_SIZE	8U
 #define HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM	4
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 5587605d6deb..5602bf226687 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -233,7 +233,6 @@ struct hnae3_ae_dev {
 	struct list_head node;
 	u32 flag;
 	unsigned long hw_err_reset_req;
-	enum hnae3_reset_type reset_type;
 	void *priv;
 };
 
@@ -270,6 +269,8 @@ struct hnae3_ae_dev {
  *   Set loopback
  * set_promisc_mode
  *   Set promisc mode
+ * request_update_promisc_mode
+ *   request to hclge(vf) to update promisc mode
  * set_mtu()
  *   set mtu
  * get_pauseparam()
@@ -354,8 +355,6 @@ struct hnae3_ae_dev {
  *   Set vlan filter config of Ports
  * set_vf_vlan_filter()
  *   Set vlan filter config of vf
- * restore_vlan_table()
- *   Restore vlan filter entries after reset
  * enable_hw_strip_rxvtag()
  *   Enable/disable hardware strip vlan tag of packets received
  * set_gro_en
@@ -375,6 +374,8 @@ struct hnae3_ae_dev {
  *   Set the max tx rate of specified vf.
  * set_vf_mac
  *   Configure the default MAC for specified VF
+ * get_module_eeprom
+ *   Get the optical module eeprom info.
  */
 struct hnae3_ae_ops {
 	int (*init_ae_dev)(struct hnae3_ae_dev *ae_dev);
@@ -408,6 +409,7 @@ struct hnae3_ae_ops {
 
 	int (*set_promisc_mode)(struct hnae3_handle *handle, bool en_uc_pmc,
 				bool en_mc_pmc);
+	void (*request_update_promisc_mode)(struct hnae3_handle *handle);
 	int (*set_mtu)(struct hnae3_handle *handle, int new_mtu);
 
 	void (*get_pauseparam)(struct hnae3_handle *handle,
@@ -525,7 +527,6 @@ struct hnae3_ae_ops {
 				struct ethtool_rxnfc *cmd);
 	int (*get_fd_all_rules)(struct hnae3_handle *handle,
 				struct ethtool_rxnfc *cmd, u32 *rule_locs);
-	int (*restore_fd_rules)(struct hnae3_handle *handle);
 	void (*enable_fd)(struct hnae3_handle *handle, bool enable);
 	int (*add_arfs_entry)(struct hnae3_handle *handle, u16 queue_id,
 			      u16 flow_id, struct flow_keys *fkeys);
@@ -539,7 +540,6 @@ struct hnae3_ae_ops {
 	void (*set_timer_task)(struct hnae3_handle *handle, bool enable);
 	int (*mac_connect_phy)(struct hnae3_handle *handle);
 	void (*mac_disconnect_phy)(struct hnae3_handle *handle);
-	void (*restore_vlan_table)(struct hnae3_handle *handle);
 	int (*get_vf_config)(struct hnae3_handle *handle, int vf,
 			     struct ifla_vf_info *ivf);
 	int (*set_vf_link_state)(struct hnae3_handle *handle, int vf,
@@ -550,6 +550,8 @@ struct hnae3_ae_ops {
 	int (*set_vf_rate)(struct hnae3_handle *handle, int vf,
 			   int min_tx_rate, int max_tx_rate, bool force);
 	int (*set_vf_mac)(struct hnae3_handle *handle, int vf, u8 *p);
+	int (*get_module_eeprom)(struct hnae3_handle *handle, u32 offset,
+				 u32 len, u8 *data);
 };
 
 struct hnae3_dcb_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index e1d88095a77e..fe7fb565da19 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -262,6 +262,8 @@ static void hns3_dbg_help(struct hnae3_handle *h)
 	dev_info(&h->pdev->dev, "dump mac tnl status\n");
 	dev_info(&h->pdev->dev, "dump loopback\n");
 	dev_info(&h->pdev->dev, "dump qs shaper [qs id]\n");
+	dev_info(&h->pdev->dev, "dump uc mac list <func id>\n");
+	dev_info(&h->pdev->dev, "dump mc mac list <func id>\n");
 
 	memset(printf_buf, 0, HNS3_DBG_BUF_LEN);
 	strncat(printf_buf, "dump reg [[bios common] [ssu <port_id>]",
@@ -270,7 +272,7 @@ static void hns3_dbg_help(struct hnae3_handle *h)
 		" [igu egu <port_id>] [rpu <tc_queue_num>]",
 		HNS3_DBG_BUF_LEN - strlen(printf_buf) - 1);
 	strncat(printf_buf + strlen(printf_buf),
-		" [rtc] [ppp] [rcb] [tqp <queue_num>]]\n",
+		" [rtc] [ppp] [rcb] [tqp <queue_num>] [mac]]\n",
 		HNS3_DBG_BUF_LEN - strlen(printf_buf) - 1);
 	dev_info(&h->pdev->dev, "%s", printf_buf);
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index da98fd7c8eca..c79d6a391105 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -15,7 +15,6 @@
 #include <linux/aer.h>
 #include <linux/skbuff.h>
 #include <linux/sctp.h>
-#include <linux/vermagic.h>
 #include <net/gre.h>
 #include <net/ip6_checksum.h>
 #include <net/pkt_cls.h>
@@ -41,10 +40,8 @@
 	} while (0)
 
 static void hns3_clear_all_ring(struct hnae3_handle *h, bool force);
-static void hns3_remove_hw_addr(struct net_device *netdev);
 
 static const char hns3_driver_name[] = "hns3";
-const char hns3_driver_version[] = VERMAGIC_STRING;
 static const char hns3_driver_string[] =
 			"Hisilicon Ethernet Network Driver for Hip08 Family";
 static const char hns3_copyright[] = "Copyright (c) 2017 Huawei Corporation.";
@@ -550,6 +547,13 @@ static int hns3_nic_uc_unsync(struct net_device *netdev,
 {
 	struct hnae3_handle *h = hns3_get_handle(netdev);
 
+	/* need ignore the request of removing device address, because
+	 * we store the device address and other addresses of uc list
+	 * in the function's mac filter list.
+	 */
+	if (ether_addr_equal(addr, netdev->dev_addr))
+		return 0;
+
 	if (h->ae_algo->ops->rm_uc_addr)
 		return h->ae_algo->ops->rm_uc_addr(h, addr);
 
@@ -597,34 +601,25 @@ static void hns3_nic_set_rx_mode(struct net_device *netdev)
 {
 	struct hnae3_handle *h = hns3_get_handle(netdev);
 	u8 new_flags;
-	int ret;
 
 	new_flags = hns3_get_netdev_flags(netdev);
 
-	ret = __dev_uc_sync(netdev, hns3_nic_uc_sync, hns3_nic_uc_unsync);
-	if (ret) {
-		netdev_err(netdev, "sync uc address fail\n");
-		if (ret == -ENOSPC)
-			new_flags |= HNAE3_OVERFLOW_UPE;
-	}
-
-	if (netdev->flags & IFF_MULTICAST) {
-		ret = __dev_mc_sync(netdev, hns3_nic_mc_sync,
-				    hns3_nic_mc_unsync);
-		if (ret) {
-			netdev_err(netdev, "sync mc address fail\n");
-			if (ret == -ENOSPC)
-				new_flags |= HNAE3_OVERFLOW_MPE;
-		}
-	}
+	__dev_uc_sync(netdev, hns3_nic_uc_sync, hns3_nic_uc_unsync);
+	__dev_mc_sync(netdev, hns3_nic_mc_sync, hns3_nic_mc_unsync);
 
 	/* User mode Promisc mode enable and vlan filtering is disabled to
-	 * let all packets in. MAC-VLAN Table overflow Promisc enabled and
-	 * vlan fitering is enabled
+	 * let all packets in.
 	 */
-	hns3_enable_vlan_filter(netdev, new_flags & HNAE3_VLAN_FLTR);
 	h->netdev_flags = new_flags;
-	hns3_update_promisc_mode(netdev, new_flags);
+	hns3_request_update_promisc_mode(h);
+}
+
+void hns3_request_update_promisc_mode(struct hnae3_handle *handle)
+{
+	const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+
+	if (ops->request_update_promisc_mode)
+		ops->request_update_promisc_mode(handle);
 }
 
 int hns3_update_promisc_mode(struct net_device *netdev, u8 promisc_flags)
@@ -2107,7 +2102,6 @@ static int hns3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ae_dev->pdev = pdev;
 	ae_dev->flag = ent->driver_data;
-	ae_dev->reset_type = HNAE3_NONE_RESET;
 	hns3_get_dev_capability(pdev, ae_dev);
 	pci_set_drvdata(pdev, ae_dev);
 
@@ -3909,9 +3903,11 @@ static int hns3_init_mac_addr(struct net_device *netdev)
 		eth_hw_addr_random(netdev);
 		dev_warn(priv->dev, "using random MAC address %pM\n",
 			 netdev->dev_addr);
-	} else {
+	} else if (!ether_addr_equal(netdev->dev_addr, mac_addr_temp)) {
 		ether_addr_copy(netdev->dev_addr, mac_addr_temp);
 		ether_addr_copy(netdev->perm_addr, mac_addr_temp);
+	} else {
+		return 0;
 	}
 
 	if (h->ae_algo->ops->set_mac_addr)
@@ -3939,17 +3935,6 @@ static void hns3_uninit_phy(struct net_device *netdev)
 		h->ae_algo->ops->mac_disconnect_phy(h);
 }
 
-static int hns3_restore_fd_rules(struct net_device *netdev)
-{
-	struct hnae3_handle *h = hns3_get_handle(netdev);
-	int ret = 0;
-
-	if (h->ae_algo->ops->restore_fd_rules)
-		ret = h->ae_algo->ops->restore_fd_rules(h);
-
-	return ret;
-}
-
 static void hns3_del_all_fd_rules(struct net_device *netdev, bool clear_list)
 {
 	struct hnae3_handle *h = hns3_get_handle(netdev);
@@ -4121,8 +4106,6 @@ static void hns3_client_uninit(struct hnae3_handle *handle, bool reset)
 	struct hns3_nic_priv *priv = netdev_priv(netdev);
 	int ret;
 
-	hns3_remove_hw_addr(netdev);
-
 	if (netdev->reg_state != NETREG_UNINITIALIZED)
 		unregister_netdev(netdev);
 
@@ -4193,56 +4176,6 @@ static int hns3_client_setup_tc(struct hnae3_handle *handle, u8 tc)
 	return hns3_nic_set_real_num_queue(ndev);
 }
 
-static int hns3_recover_hw_addr(struct net_device *ndev)
-{
-	struct netdev_hw_addr_list *list;
-	struct netdev_hw_addr *ha, *tmp;
-	int ret = 0;
-
-	netif_addr_lock_bh(ndev);
-	/* go through and sync uc_addr entries to the device */
-	list = &ndev->uc;
-	list_for_each_entry_safe(ha, tmp, &list->list, list) {
-		ret = hns3_nic_uc_sync(ndev, ha->addr);
-		if (ret)
-			goto out;
-	}
-
-	/* go through and sync mc_addr entries to the device */
-	list = &ndev->mc;
-	list_for_each_entry_safe(ha, tmp, &list->list, list) {
-		ret = hns3_nic_mc_sync(ndev, ha->addr);
-		if (ret)
-			goto out;
-	}
-
-out:
-	netif_addr_unlock_bh(ndev);
-	return ret;
-}
-
-static void hns3_remove_hw_addr(struct net_device *netdev)
-{
-	struct netdev_hw_addr_list *list;
-	struct netdev_hw_addr *ha, *tmp;
-
-	hns3_nic_uc_unsync(netdev, netdev->dev_addr);
-
-	netif_addr_lock_bh(netdev);
-	/* go through and unsync uc_addr entries to the device */
-	list = &netdev->uc;
-	list_for_each_entry_safe(ha, tmp, &list->list, list)
-		hns3_nic_uc_unsync(netdev, ha->addr);
-
-	/* go through and unsync mc_addr entries to the device */
-	list = &netdev->mc;
-	list_for_each_entry_safe(ha, tmp, &list->list, list)
-		if (ha->refcount > 1)
-			hns3_nic_mc_unsync(netdev, ha->addr);
-
-	netif_addr_unlock_bh(netdev);
-}
-
 static void hns3_clear_tx_ring(struct hns3_enet_ring *ring)
 {
 	while (ring->next_to_clean != ring->next_to_use) {
@@ -4401,7 +4334,6 @@ static void hns3_restore_coal(struct hns3_nic_priv *priv)
 
 static int hns3_reset_notify_down_enet(struct hnae3_handle *handle)
 {
-	struct hnae3_ae_dev *ae_dev = pci_get_drvdata(handle->pdev);
 	struct hnae3_knic_private_info *kinfo = &handle->kinfo;
 	struct net_device *ndev = kinfo->netdev;
 	struct hns3_nic_priv *priv = netdev_priv(ndev);
@@ -4409,15 +4341,6 @@ static int hns3_reset_notify_down_enet(struct hnae3_handle *handle)
 	if (test_and_set_bit(HNS3_NIC_STATE_RESETTING, &priv->state))
 		return 0;
 
-	/* it is cumbersome for hardware to pick-and-choose entries for deletion
-	 * from table space. Hence, for function reset software intervention is
-	 * required to delete the entries
-	 */
-	if (hns3_dev_ongoing_func_reset(ae_dev)) {
-		hns3_remove_hw_addr(ndev);
-		hns3_del_all_fd_rules(ndev, false);
-	}
-
 	if (!netif_running(ndev))
 		return 0;
 
@@ -4484,6 +4407,9 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle)
 		goto err_init_irq_fail;
 	}
 
+	if (!hns3_is_phys_func(handle->pdev))
+		hns3_init_mac_addr(netdev);
+
 	ret = hns3_client_start(handle);
 	if (ret) {
 		dev_err(priv->dev, "hns3_client_start fail! ret=%d\n", ret);
@@ -4509,33 +4435,6 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle)
 	return ret;
 }
 
-static int hns3_reset_notify_restore_enet(struct hnae3_handle *handle)
-{
-	struct net_device *netdev = handle->kinfo.netdev;
-	bool vlan_filter_enable;
-	int ret;
-
-	ret = hns3_init_mac_addr(netdev);
-	if (ret)
-		return ret;
-
-	ret = hns3_recover_hw_addr(netdev);
-	if (ret)
-		return ret;
-
-	ret = hns3_update_promisc_mode(netdev, handle->netdev_flags);
-	if (ret)
-		return ret;
-
-	vlan_filter_enable = netdev->flags & IFF_PROMISC ? false : true;
-	hns3_enable_vlan_filter(netdev, vlan_filter_enable);
-
-	if (handle->ae_algo->ops->restore_vlan_table)
-		handle->ae_algo->ops->restore_vlan_table(handle);
-
-	return hns3_restore_fd_rules(netdev);
-}
-
 static int hns3_reset_notify_uninit_enet(struct hnae3_handle *handle)
 {
 	struct net_device *netdev = handle->kinfo.netdev;
@@ -4585,9 +4484,6 @@ static int hns3_reset_notify(struct hnae3_handle *handle,
 	case HNAE3_UNINIT_CLIENT:
 		ret = hns3_reset_notify_uninit_enet(handle);
 		break;
-	case HNAE3_RESTORE_CLIENT:
-		ret = hns3_reset_notify_restore_enet(handle);
-		break;
 	default:
 		break;
 	}
@@ -4765,4 +4661,3 @@ MODULE_DESCRIPTION("HNS3: Hisilicon Ethernet Driver");
 MODULE_AUTHOR("Huawei Tech. Co., Ltd.");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("pci:hns-nic");
-MODULE_VERSION(HNS3_MOD_VERSION);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index abefd7a179f7..240ba06cd0eb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -8,10 +8,6 @@
 
 #include "hnae3.h"
 
-#define HNS3_MOD_VERSION "1.0"
-
-extern const char hns3_driver_version[];
-
 enum hns3_nic_state {
 	HNS3_NIC_STATE_TESTING,
 	HNS3_NIC_STATE_RESETTING,
@@ -580,15 +576,6 @@ static inline void hns3_write_reg(void __iomem *base, u32 reg, u32 value)
 	writel(value, reg_addr + reg);
 }
 
-static inline bool hns3_dev_ongoing_func_reset(struct hnae3_ae_dev *ae_dev)
-{
-	return (ae_dev && (ae_dev->reset_type == HNAE3_FUNC_RESET ||
-			   ae_dev->reset_type == HNAE3_FLR_RESET ||
-			   ae_dev->reset_type == HNAE3_VF_FUNC_RESET ||
-			   ae_dev->reset_type == HNAE3_VF_FULL_RESET ||
-			   ae_dev->reset_type == HNAE3_VF_PF_FUNC_RESET));
-}
-
 #define hns3_read_dev(a, reg) \
 	hns3_read_reg((a)->io_base, (reg))
 
@@ -662,6 +649,7 @@ void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
 
 void hns3_enable_vlan_filter(struct net_device *netdev, bool enable);
 int hns3_update_promisc_mode(struct net_device *netdev, u8 promisc_flags);
+void hns3_request_update_promisc_mode(struct hnae3_handle *handle);
 
 #ifdef CONFIG_HNS3_DCB
 void hns3_dcbnl_setup(struct hnae3_handle *handle);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 28b81f24afa1..1a105f2f87a4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -4,6 +4,7 @@
 #include <linux/etherdevice.h>
 #include <linux/string.h>
 #include <linux/phy.h>
+#include <linux/sfp.h>
 
 #include "hns3_enet.h"
 
@@ -12,6 +13,11 @@ struct hns3_stats {
 	int stats_offset;
 };
 
+struct hns3_sfp_type {
+	u8 type;
+	u8 ext_type;
+};
+
 /* tqp related stats */
 #define HNS3_TQP_STAT(_string, _member)	{			\
 	.stats_string = _string,				\
@@ -99,7 +105,7 @@ static int hns3_lp_setup(struct net_device *ndev, enum hnae3_loop loop, bool en)
 		h->ae_algo->ops->set_promisc_mode(h, true, true);
 	} else {
 		/* recover promisc mode before loopback test */
-		hns3_update_promisc_mode(ndev, h->netdev_flags);
+		hns3_request_update_promisc_mode(h);
 		vlan_filter_enable = ndev->flags & IFF_PROMISC ? false : true;
 		hns3_enable_vlan_filter(ndev, vlan_filter_enable);
 	}
@@ -546,10 +552,6 @@ static void hns3_get_drvinfo(struct net_device *netdev,
 		return;
 	}
 
-	strncpy(drvinfo->version, hns3_driver_version,
-		sizeof(drvinfo->version));
-	drvinfo->version[sizeof(drvinfo->version) - 1] = '\0';
-
 	strncpy(drvinfo->driver, h->pdev->driver->name,
 		sizeof(drvinfo->driver));
 	drvinfo->driver[sizeof(drvinfo->driver) - 1] = '\0';
@@ -1390,6 +1392,73 @@ static int hns3_set_fecparam(struct net_device *netdev,
 	return ops->set_fec(handle, fec_mode);
 }
 
+static int hns3_get_module_info(struct net_device *netdev,
+				struct ethtool_modinfo *modinfo)
+{
+#define HNS3_SFF_8636_V1_3 0x03
+
+	struct hnae3_handle *handle = hns3_get_handle(netdev);
+	const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+	struct hns3_sfp_type sfp_type;
+	int ret;
+
+	if (handle->pdev->revision == 0x20 || !ops->get_module_eeprom)
+		return -EOPNOTSUPP;
+
+	memset(&sfp_type, 0, sizeof(sfp_type));
+	ret = ops->get_module_eeprom(handle, 0, sizeof(sfp_type) / sizeof(u8),
+				     (u8 *)&sfp_type);
+	if (ret)
+		return ret;
+
+	switch (sfp_type.type) {
+	case SFF8024_ID_SFP:
+		modinfo->type = ETH_MODULE_SFF_8472;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		break;
+	case SFF8024_ID_QSFP_8438:
+		modinfo->type = ETH_MODULE_SFF_8436;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
+		break;
+	case SFF8024_ID_QSFP_8436_8636:
+		if (sfp_type.ext_type < HNS3_SFF_8636_V1_3) {
+			modinfo->type = ETH_MODULE_SFF_8436;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
+		} else {
+			modinfo->type = ETH_MODULE_SFF_8636;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
+		}
+		break;
+	case SFF8024_ID_QSFP28_8636:
+		modinfo->type = ETH_MODULE_SFF_8636;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
+		break;
+	default:
+		netdev_err(netdev, "Optical module unknown: %#x\n",
+			   sfp_type.type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int hns3_get_module_eeprom(struct net_device *netdev,
+				  struct ethtool_eeprom *ee, u8 *data)
+{
+	struct hnae3_handle *handle = hns3_get_handle(netdev);
+	const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+
+	if (handle->pdev->revision == 0x20 || !ops->get_module_eeprom)
+		return -EOPNOTSUPP;
+
+	if (!ee->len)
+		return -EINVAL;
+
+	memset(data, 0, ee->len);
+
+	return ops->get_module_eeprom(handle, ee->offset, ee->len, data);
+}
+
 #define HNS3_ETHTOOL_COALESCE	(ETHTOOL_COALESCE_USECS |		\
 				 ETHTOOL_COALESCE_USE_ADAPTIVE |	\
 				 ETHTOOL_COALESCE_RX_USECS_HIGH |	\
@@ -1453,6 +1522,8 @@ static const struct ethtool_ops hns3_ethtool_ops = {
 	.set_msglevel = hns3_set_msglevel,
 	.get_fecparam = hns3_get_fecparam,
 	.set_fecparam = hns3_set_fecparam,
+	.get_module_info = hns3_get_module_info,
+	.get_module_eeprom = hns3_get_module_eeprom,
 };
 
 void hns3_ethtool_set_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
index 0fb61d440d3b..6c28c8f6292c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
@@ -4,6 +4,7 @@
 #
 
 ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
+ccflags-y += -I $(srctree)/$(src)
 
 obj-$(CONFIG_HNS3_HCLGE) += hclge.o
 hclge-objs = hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o hclge_mbx.o hclge_err.o  hclge_debugfs.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 96498d9b4754..9a9d752aedc5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -270,6 +270,8 @@ enum hclge_opcode_type {
 	HCLGE_OPC_M7_COMPAT_CFG		= 0x701A,
 
 	/* SFP command */
+	HCLGE_OPC_GET_SFP_EEPROM	= 0x7100,
+	HCLGE_OPC_GET_SFP_EXIST		= 0x7101,
 	HCLGE_OPC_GET_SFP_INFO		= 0x7104,
 
 	/* Error INT commands */
@@ -733,31 +735,6 @@ struct hclge_mac_mgr_tbl_entry_cmd {
 	u8      rsv3[2];
 };
 
-struct hclge_mac_vlan_add_cmd {
-	__le16  flags;
-	__le16  mac_addr_hi16;
-	__le32  mac_addr_lo32;
-	__le32  mac_addr_msk_hi32;
-	__le16  mac_addr_msk_lo16;
-	__le16  vlan_tag;
-	__le16  ingress_port;
-	__le16  egress_port;
-	u8      rsv[4];
-};
-
-#define HNS3_MAC_VLAN_CFG_FLAG_BIT 0
-struct hclge_mac_vlan_remove_cmd {
-	__le16  flags;
-	__le16  mac_addr_hi16;
-	__le32  mac_addr_lo32;
-	__le32  mac_addr_msk_hi32;
-	__le16  mac_addr_msk_lo16;
-	__le16  vlan_tag;
-	__le16  ingress_port;
-	__le16  egress_port;
-	u8      rsv[4];
-};
-
 struct hclge_vlan_filter_ctrl_cmd {
 	u8 vlan_type;
 	u8 vlan_fe;
@@ -1079,6 +1056,19 @@ struct hclge_firmware_compat_cmd {
 	u8 rsv[20];
 };
 
+#define HCLGE_SFP_INFO_CMD_NUM	6
+#define HCLGE_SFP_INFO_BD0_LEN	20
+#define HCLGE_SFP_INFO_BDX_LEN	24
+#define HCLGE_SFP_INFO_MAX_LEN \
+	(HCLGE_SFP_INFO_BD0_LEN + \
+	(HCLGE_SFP_INFO_CMD_NUM - 1) * HCLGE_SFP_INFO_BDX_LEN)
+
+struct hclge_sfp_info_bd0_cmd {
+	__le16 offset;
+	__le16 read_len;
+	u8 data[HCLGE_SFP_INFO_BD0_LEN];
+};
+
 int hclge_cmd_init(struct hclge_dev *hdev);
 static inline void hclge_write_reg(void __iomem *base, u32 reg, u32 value)
 {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
index 17228288d4df..6cfa8253eefc 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
@@ -143,7 +143,7 @@ static void hclge_dbg_dump_reg_common(struct hclge_dev *hdev,
 		return;
 	}
 
-	buf_len	= sizeof(struct hclge_desc) * bd_num;
+	buf_len = sizeof(struct hclge_desc) * bd_num;
 	desc_src = kzalloc(buf_len, GFP_KERNEL);
 	if (!desc_src)
 		return;
@@ -173,6 +173,114 @@ static void hclge_dbg_dump_reg_common(struct hclge_dev *hdev,
 	kfree(desc_src);
 }
 
+static void hclge_dbg_dump_mac_enable_status(struct hclge_dev *hdev)
+{
+	struct hclge_config_mac_mode_cmd *req;
+	struct hclge_desc desc;
+	u32 loop_en;
+	int ret;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_CONFIG_MAC_MODE, true);
+
+	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"failed to dump mac enable status, ret = %d\n", ret);
+		return;
+	}
+
+	req = (struct hclge_config_mac_mode_cmd *)desc.data;
+	loop_en = le32_to_cpu(req->txrx_pad_fcs_loop_en);
+
+	dev_info(&hdev->pdev->dev, "config_mac_trans_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_TX_EN_B));
+	dev_info(&hdev->pdev->dev, "config_mac_rcv_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_RX_EN_B));
+	dev_info(&hdev->pdev->dev, "config_pad_trans_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_PAD_TX_B));
+	dev_info(&hdev->pdev->dev, "config_pad_rcv_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_PAD_RX_B));
+	dev_info(&hdev->pdev->dev, "config_1588_trans_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_1588_TX_B));
+	dev_info(&hdev->pdev->dev, "config_1588_rcv_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_1588_RX_B));
+	dev_info(&hdev->pdev->dev, "config_mac_app_loop_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_APP_LP_B));
+	dev_info(&hdev->pdev->dev, "config_mac_line_loop_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_LINE_LP_B));
+	dev_info(&hdev->pdev->dev, "config_mac_fcs_tx_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_FCS_TX_B));
+	dev_info(&hdev->pdev->dev, "config_mac_rx_oversize_truncate_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_RX_OVERSIZE_TRUNCATE_B));
+	dev_info(&hdev->pdev->dev, "config_mac_rx_fcs_strip_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_RX_FCS_STRIP_B));
+	dev_info(&hdev->pdev->dev, "config_mac_rx_fcs_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_RX_FCS_B));
+	dev_info(&hdev->pdev->dev, "config_mac_tx_under_min_err_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_TX_UNDER_MIN_ERR_B));
+	dev_info(&hdev->pdev->dev, "config_mac_tx_oversize_truncate_en: %#x\n",
+		 hnae3_get_bit(loop_en, HCLGE_MAC_TX_OVERSIZE_TRUNCATE_B));
+}
+
+static void hclge_dbg_dump_mac_frame_size(struct hclge_dev *hdev)
+{
+	struct hclge_config_max_frm_size_cmd *req;
+	struct hclge_desc desc;
+	int ret;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_CONFIG_MAX_FRM_SIZE, true);
+
+	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"failed to dump mac frame size, ret = %d\n", ret);
+		return;
+	}
+
+	req = (struct hclge_config_max_frm_size_cmd *)desc.data;
+
+	dev_info(&hdev->pdev->dev, "max_frame_size: %u\n",
+		 le16_to_cpu(req->max_frm_size));
+	dev_info(&hdev->pdev->dev, "min_frame_size: %u\n", req->min_frm_size);
+}
+
+static void hclge_dbg_dump_mac_speed_duplex(struct hclge_dev *hdev)
+{
+#define HCLGE_MAC_SPEED_SHIFT	0
+#define HCLGE_MAC_SPEED_MASK	GENMASK(5, 0)
+#define HCLGE_MAC_DUPLEX_SHIFT	7
+
+	struct hclge_config_mac_speed_dup_cmd *req;
+	struct hclge_desc desc;
+	int ret;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_CONFIG_SPEED_DUP, true);
+
+	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"failed to dump mac speed duplex, ret = %d\n", ret);
+		return;
+	}
+
+	req = (struct hclge_config_mac_speed_dup_cmd *)desc.data;
+
+	dev_info(&hdev->pdev->dev, "speed: %#lx\n",
+		 hnae3_get_field(req->speed_dup, HCLGE_MAC_SPEED_MASK,
+				 HCLGE_MAC_SPEED_SHIFT));
+	dev_info(&hdev->pdev->dev, "duplex: %#x\n",
+		 hnae3_get_bit(req->speed_dup, HCLGE_MAC_DUPLEX_SHIFT));
+}
+
+static void hclge_dbg_dump_mac(struct hclge_dev *hdev)
+{
+	hclge_dbg_dump_mac_enable_status(hdev);
+
+	hclge_dbg_dump_mac_frame_size(hdev);
+
+	hclge_dbg_dump_mac_speed_duplex(hdev);
+}
+
 static void hclge_dbg_dump_dcb(struct hclge_dev *hdev, const char *cmd_buf)
 {
 	struct device *dev = &hdev->pdev->dev;
@@ -304,6 +412,11 @@ static void hclge_dbg_dump_reg_cmd(struct hclge_dev *hdev, const char *cmd_buf)
 		}
 	}
 
+	if (strncmp(cmd_buf, "mac", strlen("mac")) == 0) {
+		hclge_dbg_dump_mac(hdev);
+		has_dump = true;
+	}
+
 	if (strncmp(cmd_buf, "dcb", 3) == 0) {
 		hclge_dbg_dump_dcb(hdev, &cmd_buf[sizeof("dcb")]);
 		has_dump = true;
@@ -1328,6 +1441,49 @@ static void hclge_dbg_dump_qs_shaper(struct hclge_dev *hdev,
 	hclge_dbg_dump_qs_shaper_single(hdev, qsid);
 }
 
+static int hclge_dbg_dump_mac_list(struct hclge_dev *hdev, const char *cmd_buf,
+				   bool is_unicast)
+{
+	struct hclge_mac_node *mac_node, *tmp;
+	struct hclge_vport *vport;
+	struct list_head *list;
+	u32 func_id;
+	int ret;
+
+	ret = kstrtouint(cmd_buf, 0, &func_id);
+	if (ret < 0) {
+		dev_err(&hdev->pdev->dev,
+			"dump mac list: bad command string, ret = %d\n", ret);
+		return -EINVAL;
+	}
+
+	if (func_id >= hdev->num_alloc_vport) {
+		dev_err(&hdev->pdev->dev,
+			"function id(%u) is out of range(0-%u)\n", func_id,
+			hdev->num_alloc_vport - 1);
+		return -EINVAL;
+	}
+
+	vport = &hdev->vport[func_id];
+
+	list = is_unicast ? &vport->uc_mac_list : &vport->mc_mac_list;
+
+	dev_info(&hdev->pdev->dev, "vport %u %s mac list:\n",
+		 func_id, is_unicast ? "uc" : "mc");
+	dev_info(&hdev->pdev->dev, "mac address              state\n");
+
+	spin_lock_bh(&vport->mac_list_lock);
+
+	list_for_each_entry_safe(mac_node, tmp, list, node) {
+		dev_info(&hdev->pdev->dev, "%pM         %d\n",
+			 mac_node->mac_addr, mac_node->state);
+	}
+
+	spin_unlock_bh(&vport->mac_list_lock);
+
+	return 0;
+}
+
 int hclge_dbg_run_cmd(struct hnae3_handle *handle, const char *cmd_buf)
 {
 #define DUMP_REG	"dump reg"
@@ -1372,6 +1528,14 @@ int hclge_dbg_run_cmd(struct hnae3_handle *handle, const char *cmd_buf)
 	} else if (strncmp(cmd_buf, "dump qs shaper", 14) == 0) {
 		hclge_dbg_dump_qs_shaper(hdev,
 					 &cmd_buf[sizeof("dump qs shaper")]);
+	} else if (strncmp(cmd_buf, "dump uc mac list", 16) == 0) {
+		hclge_dbg_dump_mac_list(hdev,
+					&cmd_buf[sizeof("dump uc mac list")],
+					true);
+	} else if (strncmp(cmd_buf, "dump mc mac list", 16) == 0) {
+		hclge_dbg_dump_mac_list(hdev,
+					&cmd_buf[sizeof("dump mc mac list")],
+					false);
 	} else {
 		dev_info(&hdev->pdev->dev, "unknown command\n");
 		return -EINVAL;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a758f9ae32be..71a54ddb51f5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -62,14 +62,16 @@ static int hclge_init_vlan_config(struct hclge_dev *hdev);
 static void hclge_sync_vlan_filter(struct hclge_dev *hdev);
 static int hclge_reset_ae_dev(struct hnae3_ae_dev *ae_dev);
 static bool hclge_get_hw_reset_stat(struct hnae3_handle *handle);
-static int hclge_set_umv_space(struct hclge_dev *hdev, u16 space_size,
-			       u16 *allocated_size, bool is_alloc);
 static void hclge_rfs_filter_expire(struct hclge_dev *hdev);
 static void hclge_clear_arfs_rules(struct hnae3_handle *handle);
 static enum hnae3_reset_type hclge_get_reset_level(struct hnae3_ae_dev *ae_dev,
 						   unsigned long *addr);
 static int hclge_set_default_loopback(struct hclge_dev *hdev);
 
+static void hclge_sync_mac_table(struct hclge_dev *hdev);
+static void hclge_restore_hw_table(struct hclge_dev *hdev);
+static void hclge_sync_promisc_mode(struct hclge_dev *hdev);
+
 static struct hnae3_ae_algo ae_algo;
 
 static struct workqueue_struct *hclge_wq;
@@ -1687,6 +1689,7 @@ static int hclge_alloc_vport(struct hclge_dev *hdev)
 		INIT_LIST_HEAD(&vport->vlan_list);
 		INIT_LIST_HEAD(&vport->uc_mac_list);
 		INIT_LIST_HEAD(&vport->mc_mac_list);
+		spin_lock_init(&vport->mac_list_lock);
 
 		if (i == 0)
 			ret = hclge_vport_setup(vport, tqp_main_vport);
@@ -3729,22 +3732,13 @@ static int hclge_reset_stack(struct hclge_dev *hdev)
 	if (ret)
 		return ret;
 
-	ret = hclge_notify_client(hdev, HNAE3_INIT_CLIENT);
-	if (ret)
-		return ret;
-
-	return hclge_notify_client(hdev, HNAE3_RESTORE_CLIENT);
+	return hclge_notify_client(hdev, HNAE3_INIT_CLIENT);
 }
 
 static int hclge_reset_prepare(struct hclge_dev *hdev)
 {
-	struct hnae3_ae_dev *ae_dev = pci_get_drvdata(hdev->pdev);
 	int ret;
 
-	/* Initialize ae_dev reset status as well, in case enet layer wants to
-	 * know if device is undergoing reset
-	 */
-	ae_dev->reset_type = hdev->reset_type;
 	hdev->rst_stats.reset_cnt++;
 	/* perform reset of the stack & ae device for a client */
 	ret = hclge_notify_roce_client(hdev, HNAE3_DOWN_CLIENT);
@@ -3806,7 +3800,6 @@ static int hclge_reset_rebuild(struct hclge_dev *hdev)
 	hdev->last_reset_time = jiffies;
 	hdev->rst_stats.reset_fail_cnt = 0;
 	hdev->rst_stats.reset_done_cnt++;
-	ae_dev->reset_type = HNAE3_NONE_RESET;
 	clear_bit(HCLGE_STATE_RST_FAIL, &hdev->state);
 
 	/* if default_reset_request has a higher level reset request,
@@ -3973,6 +3966,8 @@ static void hclge_periodic_service_task(struct hclge_dev *hdev)
 	 * updated when it is triggered by mbx.
 	 */
 	hclge_update_link_status(hdev);
+	hclge_sync_mac_table(hdev);
+	hclge_sync_promisc_mode(hdev);
 
 	if (time_is_after_jiffies(hdev->last_serv_processed + HZ)) {
 		delta = jiffies - hdev->last_serv_processed;
@@ -4722,7 +4717,8 @@ static int hclge_cmd_set_promisc_mode(struct hclge_dev *hdev,
 	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
 	if (ret)
 		dev_err(&hdev->pdev->dev,
-			"Set promisc mode fail, status is %d.\n", ret);
+			"failed to set vport %d promisc mode, ret = %d.\n",
+			param->vf_id, ret);
 
 	return ret;
 }
@@ -4772,6 +4768,14 @@ static int hclge_set_promisc_mode(struct hnae3_handle *handle, bool en_uc_pmc,
 					    en_bc_pmc);
 }
 
+static void hclge_request_update_promisc_mode(struct hnae3_handle *handle)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+
+	set_bit(HCLGE_STATE_PROMISC_CHANGED, &hdev->state);
+}
+
 static int hclge_get_fd_mode(struct hclge_dev *hdev, u8 *fd_mode)
 {
 	struct hclge_get_fd_mode_cmd *req;
@@ -4822,7 +4826,8 @@ static int hclge_get_fd_allocation(struct hclge_dev *hdev,
 	return ret;
 }
 
-static int hclge_set_fd_key_config(struct hclge_dev *hdev, int stage_num)
+static int hclge_set_fd_key_config(struct hclge_dev *hdev,
+				   enum HCLGE_FD_STAGE stage_num)
 {
 	struct hclge_set_fd_key_config_cmd *req;
 	struct hclge_fd_key_cfg *stage;
@@ -4876,9 +4881,6 @@ static int hclge_init_fd_config(struct hclge_dev *hdev)
 		return -EOPNOTSUPP;
 	}
 
-	hdev->fd_cfg.proto_support =
-		TCP_V4_FLOW | UDP_V4_FLOW | SCTP_V4_FLOW | TCP_V6_FLOW |
-		UDP_V6_FLOW | SCTP_V6_FLOW | IPV4_USER_FLOW | IPV6_USER_FLOW;
 	key_cfg = &hdev->fd_cfg.key_cfg[HCLGE_FD_STAGE_1];
 	key_cfg->key_sel = HCLGE_FD_KEY_BASE_ON_TUPLE,
 	key_cfg->inner_sipv6_word_en = LOW_2_WORDS;
@@ -4892,11 +4894,9 @@ static int hclge_init_fd_config(struct hclge_dev *hdev)
 				BIT(INNER_SRC_PORT) | BIT(INNER_DST_PORT);
 
 	/* If use max 400bit key, we can support tuples for ether type */
-	if (hdev->fd_cfg.max_key_length == MAX_KEY_LENGTH) {
-		hdev->fd_cfg.proto_support |= ETHER_FLOW;
+	if (hdev->fd_cfg.fd_mode == HCLGE_FD_MODE_DEPTH_2K_WIDTH_400B_STAGE_1)
 		key_cfg->tuple_active |=
 				BIT(INNER_DST_MAC) | BIT(INNER_SRC_MAC);
-	}
 
 	/* roce_type is used to filter roce frames
 	 * dst_vport is used to specify the rule
@@ -5006,8 +5006,6 @@ static bool hclge_fd_convert_tuple(u32 tuple_bit, u8 *key_x, u8 *key_y,
 		return true;
 
 	switch (tuple_bit) {
-	case 0:
-		return false;
 	case BIT(INNER_DST_MAC):
 		for (i = 0; i < ETH_ALEN; i++) {
 			calc_x(key_x[ETH_ALEN - 1 - i], rule->tuples.dst_mac[i],
@@ -5165,9 +5163,10 @@ static int hclge_config_key(struct hclge_dev *hdev, u8 stage,
 	struct hclge_fd_key_cfg *key_cfg = &hdev->fd_cfg.key_cfg[stage];
 	u8 key_x[MAX_KEY_BYTES], key_y[MAX_KEY_BYTES];
 	u8 *cur_key_x, *cur_key_y;
-	unsigned int i;
-	int ret, tuple_size;
 	u8 meta_data_region;
+	u8 tuple_size;
+	int ret;
+	u32 i;
 
 	memset(key_x, 0, sizeof(key_x));
 	memset(key_y, 0, sizeof(key_y));
@@ -5244,172 +5243,255 @@ static int hclge_config_action(struct hclge_dev *hdev, u8 stage,
 	return hclge_fd_ad_config(hdev, stage, ad_data.ad_id, &ad_data);
 }
 
-static int hclge_fd_check_spec(struct hclge_dev *hdev,
-			       struct ethtool_rx_flow_spec *fs, u32 *unused)
+static int hclge_fd_check_tcpip4_tuple(struct ethtool_tcpip4_spec *spec,
+				       u32 *unused_tuple)
 {
-	struct ethtool_tcpip4_spec *tcp_ip4_spec;
-	struct ethtool_usrip4_spec *usr_ip4_spec;
-	struct ethtool_tcpip6_spec *tcp_ip6_spec;
-	struct ethtool_usrip6_spec *usr_ip6_spec;
-	struct ethhdr *ether_spec;
-
-	if (fs->location >= hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1])
+	if (!spec || !unused_tuple)
 		return -EINVAL;
 
-	if (!(fs->flow_type & hdev->fd_cfg.proto_support))
-		return -EOPNOTSUPP;
-
-	if ((fs->flow_type & FLOW_EXT) &&
-	    (fs->h_ext.data[0] != 0 || fs->h_ext.data[1] != 0)) {
-		dev_err(&hdev->pdev->dev, "user-def bytes are not supported\n");
-		return -EOPNOTSUPP;
-	}
+	*unused_tuple |= BIT(INNER_SRC_MAC) | BIT(INNER_DST_MAC);
 
-	switch (fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) {
-	case SCTP_V4_FLOW:
-	case TCP_V4_FLOW:
-	case UDP_V4_FLOW:
-		tcp_ip4_spec = &fs->h_u.tcp_ip4_spec;
-		*unused |= BIT(INNER_SRC_MAC) | BIT(INNER_DST_MAC);
+	if (!spec->ip4src)
+		*unused_tuple |= BIT(INNER_SRC_IP);
 
-		if (!tcp_ip4_spec->ip4src)
-			*unused |= BIT(INNER_SRC_IP);
+	if (!spec->ip4dst)
+		*unused_tuple |= BIT(INNER_DST_IP);
 
-		if (!tcp_ip4_spec->ip4dst)
-			*unused |= BIT(INNER_DST_IP);
+	if (!spec->psrc)
+		*unused_tuple |= BIT(INNER_SRC_PORT);
 
-		if (!tcp_ip4_spec->psrc)
-			*unused |= BIT(INNER_SRC_PORT);
+	if (!spec->pdst)
+		*unused_tuple |= BIT(INNER_DST_PORT);
 
-		if (!tcp_ip4_spec->pdst)
-			*unused |= BIT(INNER_DST_PORT);
+	if (!spec->tos)
+		*unused_tuple |= BIT(INNER_IP_TOS);
 
-		if (!tcp_ip4_spec->tos)
-			*unused |= BIT(INNER_IP_TOS);
+	return 0;
+}
 
-		break;
-	case IP_USER_FLOW:
-		usr_ip4_spec = &fs->h_u.usr_ip4_spec;
-		*unused |= BIT(INNER_SRC_MAC) | BIT(INNER_DST_MAC) |
-			BIT(INNER_SRC_PORT) | BIT(INNER_DST_PORT);
+static int hclge_fd_check_ip4_tuple(struct ethtool_usrip4_spec *spec,
+				    u32 *unused_tuple)
+{
+	if (!spec || !unused_tuple)
+		return -EINVAL;
 
-		if (!usr_ip4_spec->ip4src)
-			*unused |= BIT(INNER_SRC_IP);
+	*unused_tuple |= BIT(INNER_SRC_MAC) | BIT(INNER_DST_MAC) |
+		BIT(INNER_SRC_PORT) | BIT(INNER_DST_PORT);
 
-		if (!usr_ip4_spec->ip4dst)
-			*unused |= BIT(INNER_DST_IP);
+	if (!spec->ip4src)
+		*unused_tuple |= BIT(INNER_SRC_IP);
 
-		if (!usr_ip4_spec->tos)
-			*unused |= BIT(INNER_IP_TOS);
+	if (!spec->ip4dst)
+		*unused_tuple |= BIT(INNER_DST_IP);
 
-		if (!usr_ip4_spec->proto)
-			*unused |= BIT(INNER_IP_PROTO);
+	if (!spec->tos)
+		*unused_tuple |= BIT(INNER_IP_TOS);
 
-		if (usr_ip4_spec->l4_4_bytes)
-			return -EOPNOTSUPP;
+	if (!spec->proto)
+		*unused_tuple |= BIT(INNER_IP_PROTO);
 
-		if (usr_ip4_spec->ip_ver != ETH_RX_NFC_IP4)
-			return -EOPNOTSUPP;
+	if (spec->l4_4_bytes)
+		return -EOPNOTSUPP;
 
-		break;
-	case SCTP_V6_FLOW:
-	case TCP_V6_FLOW:
-	case UDP_V6_FLOW:
-		tcp_ip6_spec = &fs->h_u.tcp_ip6_spec;
-		*unused |= BIT(INNER_SRC_MAC) | BIT(INNER_DST_MAC) |
-			BIT(INNER_IP_TOS);
+	if (spec->ip_ver != ETH_RX_NFC_IP4)
+		return -EOPNOTSUPP;
 
-		/* check whether src/dst ip address used */
-		if (!tcp_ip6_spec->ip6src[0] && !tcp_ip6_spec->ip6src[1] &&
-		    !tcp_ip6_spec->ip6src[2] && !tcp_ip6_spec->ip6src[3])
-			*unused |= BIT(INNER_SRC_IP);
+	return 0;
+}
 
-		if (!tcp_ip6_spec->ip6dst[0] && !tcp_ip6_spec->ip6dst[1] &&
-		    !tcp_ip6_spec->ip6dst[2] && !tcp_ip6_spec->ip6dst[3])
-			*unused |= BIT(INNER_DST_IP);
+static int hclge_fd_check_tcpip6_tuple(struct ethtool_tcpip6_spec *spec,
+				       u32 *unused_tuple)
+{
+	if (!spec || !unused_tuple)
+		return -EINVAL;
 
-		if (!tcp_ip6_spec->psrc)
-			*unused |= BIT(INNER_SRC_PORT);
+	*unused_tuple |= BIT(INNER_SRC_MAC) | BIT(INNER_DST_MAC) |
+		BIT(INNER_IP_TOS);
 
-		if (!tcp_ip6_spec->pdst)
-			*unused |= BIT(INNER_DST_PORT);
+	/* check whether src/dst ip address used */
+	if (!spec->ip6src[0] && !spec->ip6src[1] &&
+	    !spec->ip6src[2] && !spec->ip6src[3])
+		*unused_tuple |= BIT(INNER_SRC_IP);
 
-		if (tcp_ip6_spec->tclass)
-			return -EOPNOTSUPP;
+	if (!spec->ip6dst[0] && !spec->ip6dst[1] &&
+	    !spec->ip6dst[2] && !spec->ip6dst[3])
+		*unused_tuple |= BIT(INNER_DST_IP);
 
-		break;
-	case IPV6_USER_FLOW:
-		usr_ip6_spec = &fs->h_u.usr_ip6_spec;
-		*unused |= BIT(INNER_SRC_MAC) | BIT(INNER_DST_MAC) |
-			BIT(INNER_IP_TOS) | BIT(INNER_SRC_PORT) |
-			BIT(INNER_DST_PORT);
+	if (!spec->psrc)
+		*unused_tuple |= BIT(INNER_SRC_PORT);
 
-		/* check whether src/dst ip address used */
-		if (!usr_ip6_spec->ip6src[0] && !usr_ip6_spec->ip6src[1] &&
-		    !usr_ip6_spec->ip6src[2] && !usr_ip6_spec->ip6src[3])
-			*unused |= BIT(INNER_SRC_IP);
+	if (!spec->pdst)
+		*unused_tuple |= BIT(INNER_DST_PORT);
 
-		if (!usr_ip6_spec->ip6dst[0] && !usr_ip6_spec->ip6dst[1] &&
-		    !usr_ip6_spec->ip6dst[2] && !usr_ip6_spec->ip6dst[3])
-			*unused |= BIT(INNER_DST_IP);
+	if (spec->tclass)
+		return -EOPNOTSUPP;
 
-		if (!usr_ip6_spec->l4_proto)
-			*unused |= BIT(INNER_IP_PROTO);
+	return 0;
+}
 
-		if (usr_ip6_spec->tclass)
-			return -EOPNOTSUPP;
+static int hclge_fd_check_ip6_tuple(struct ethtool_usrip6_spec *spec,
+				    u32 *unused_tuple)
+{
+	if (!spec || !unused_tuple)
+		return -EINVAL;
 
-		if (usr_ip6_spec->l4_4_bytes)
-			return -EOPNOTSUPP;
+	*unused_tuple |= BIT(INNER_SRC_MAC) | BIT(INNER_DST_MAC) |
+		BIT(INNER_IP_TOS) | BIT(INNER_SRC_PORT) | BIT(INNER_DST_PORT);
 
-		break;
-	case ETHER_FLOW:
-		ether_spec = &fs->h_u.ether_spec;
-		*unused |= BIT(INNER_SRC_IP) | BIT(INNER_DST_IP) |
-			BIT(INNER_SRC_PORT) | BIT(INNER_DST_PORT) |
-			BIT(INNER_IP_TOS) | BIT(INNER_IP_PROTO);
+	/* check whether src/dst ip address used */
+	if (!spec->ip6src[0] && !spec->ip6src[1] &&
+	    !spec->ip6src[2] && !spec->ip6src[3])
+		*unused_tuple |= BIT(INNER_SRC_IP);
 
-		if (is_zero_ether_addr(ether_spec->h_source))
-			*unused |= BIT(INNER_SRC_MAC);
+	if (!spec->ip6dst[0] && !spec->ip6dst[1] &&
+	    !spec->ip6dst[2] && !spec->ip6dst[3])
+		*unused_tuple |= BIT(INNER_DST_IP);
 
-		if (is_zero_ether_addr(ether_spec->h_dest))
-			*unused |= BIT(INNER_DST_MAC);
+	if (!spec->l4_proto)
+		*unused_tuple |= BIT(INNER_IP_PROTO);
 
-		if (!ether_spec->h_proto)
-			*unused |= BIT(INNER_ETH_TYPE);
+	if (spec->tclass)
+		return -EOPNOTSUPP;
 
-		break;
-	default:
+	if (spec->l4_4_bytes)
 		return -EOPNOTSUPP;
-	}
 
-	if ((fs->flow_type & FLOW_EXT)) {
-		if (fs->h_ext.vlan_etype)
+	return 0;
+}
+
+static int hclge_fd_check_ether_tuple(struct ethhdr *spec, u32 *unused_tuple)
+{
+	if (!spec || !unused_tuple)
+		return -EINVAL;
+
+	*unused_tuple |= BIT(INNER_SRC_IP) | BIT(INNER_DST_IP) |
+		BIT(INNER_SRC_PORT) | BIT(INNER_DST_PORT) |
+		BIT(INNER_IP_TOS) | BIT(INNER_IP_PROTO);
+
+	if (is_zero_ether_addr(spec->h_source))
+		*unused_tuple |= BIT(INNER_SRC_MAC);
+
+	if (is_zero_ether_addr(spec->h_dest))
+		*unused_tuple |= BIT(INNER_DST_MAC);
+
+	if (!spec->h_proto)
+		*unused_tuple |= BIT(INNER_ETH_TYPE);
+
+	return 0;
+}
+
+static int hclge_fd_check_ext_tuple(struct hclge_dev *hdev,
+				    struct ethtool_rx_flow_spec *fs,
+				    u32 *unused_tuple)
+{
+	if (fs->flow_type & FLOW_EXT) {
+		if (fs->h_ext.vlan_etype) {
+			dev_err(&hdev->pdev->dev, "vlan-etype is not supported!\n");
 			return -EOPNOTSUPP;
+		}
+
 		if (!fs->h_ext.vlan_tci)
-			*unused |= BIT(INNER_VLAN_TAG_FST);
+			*unused_tuple |= BIT(INNER_VLAN_TAG_FST);
 
-		if (fs->m_ext.vlan_tci) {
-			if (be16_to_cpu(fs->h_ext.vlan_tci) >= VLAN_N_VID)
-				return -EINVAL;
+		if (fs->m_ext.vlan_tci &&
+		    be16_to_cpu(fs->h_ext.vlan_tci) >= VLAN_N_VID) {
+			dev_err(&hdev->pdev->dev,
+				"failed to config vlan_tci, invalid vlan_tci: %u, max is %u.\n",
+				ntohs(fs->h_ext.vlan_tci), VLAN_N_VID - 1);
+			return -EINVAL;
 		}
 	} else {
-		*unused |= BIT(INNER_VLAN_TAG_FST);
+		*unused_tuple |= BIT(INNER_VLAN_TAG_FST);
 	}
 
 	if (fs->flow_type & FLOW_MAC_EXT) {
-		if (!(hdev->fd_cfg.proto_support & ETHER_FLOW))
+		if (hdev->fd_cfg.fd_mode !=
+		    HCLGE_FD_MODE_DEPTH_2K_WIDTH_400B_STAGE_1) {
+			dev_err(&hdev->pdev->dev,
+				"FLOW_MAC_EXT is not supported in current fd mode!\n");
 			return -EOPNOTSUPP;
+		}
 
 		if (is_zero_ether_addr(fs->h_ext.h_dest))
-			*unused |= BIT(INNER_DST_MAC);
+			*unused_tuple |= BIT(INNER_DST_MAC);
 		else
-			*unused &= ~(BIT(INNER_DST_MAC));
+			*unused_tuple &= ~BIT(INNER_DST_MAC);
 	}
 
 	return 0;
 }
 
+static int hclge_fd_check_spec(struct hclge_dev *hdev,
+			       struct ethtool_rx_flow_spec *fs,
+			       u32 *unused_tuple)
+{
+	u32 flow_type;
+	int ret;
+
+	if (fs->location >= hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1]) {
+		dev_err(&hdev->pdev->dev,
+			"failed to config fd rules, invalid rule location: %u, max is %u\n.",
+			fs->location,
+			hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1] - 1);
+		return -EINVAL;
+	}
+
+	if ((fs->flow_type & FLOW_EXT) &&
+	    (fs->h_ext.data[0] != 0 || fs->h_ext.data[1] != 0)) {
+		dev_err(&hdev->pdev->dev, "user-def bytes are not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	flow_type = fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT);
+	switch (flow_type) {
+	case SCTP_V4_FLOW:
+	case TCP_V4_FLOW:
+	case UDP_V4_FLOW:
+		ret = hclge_fd_check_tcpip4_tuple(&fs->h_u.tcp_ip4_spec,
+						  unused_tuple);
+		break;
+	case IP_USER_FLOW:
+		ret = hclge_fd_check_ip4_tuple(&fs->h_u.usr_ip4_spec,
+					       unused_tuple);
+		break;
+	case SCTP_V6_FLOW:
+	case TCP_V6_FLOW:
+	case UDP_V6_FLOW:
+		ret = hclge_fd_check_tcpip6_tuple(&fs->h_u.tcp_ip6_spec,
+						  unused_tuple);
+		break;
+	case IPV6_USER_FLOW:
+		ret = hclge_fd_check_ip6_tuple(&fs->h_u.usr_ip6_spec,
+					       unused_tuple);
+		break;
+	case ETHER_FLOW:
+		if (hdev->fd_cfg.fd_mode !=
+			HCLGE_FD_MODE_DEPTH_2K_WIDTH_400B_STAGE_1) {
+			dev_err(&hdev->pdev->dev,
+				"ETHER_FLOW is not supported in current fd mode!\n");
+			return -EOPNOTSUPP;
+		}
+
+		ret = hclge_fd_check_ether_tuple(&fs->h_u.ether_spec,
+						 unused_tuple);
+		break;
+	default:
+		dev_err(&hdev->pdev->dev,
+			"unsupported protocol type, protocol type = %#x\n",
+			flow_type);
+		return -EOPNOTSUPP;
+	}
+
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"failed to check flow union tuple, ret = %d\n",
+			ret);
+		return ret;
+	}
+
+	return hclge_fd_check_ext_tuple(hdev, fs, unused_tuple);
+}
+
 static bool hclge_fd_rule_exist(struct hclge_dev *hdev, u16 location)
 {
 	struct hclge_fd_rule *rule = NULL;
@@ -5618,7 +5700,7 @@ static int hclge_fd_get_tuple(struct hclge_dev *hdev,
 		break;
 	}
 
-	if ((fs->flow_type & FLOW_EXT)) {
+	if (fs->flow_type & FLOW_EXT) {
 		rule->tuples.vlan_tag1 = be16_to_cpu(fs->h_ext.vlan_tci);
 		rule->tuples_mask.vlan_tag1 = be16_to_cpu(fs->m_ext.vlan_tci);
 	}
@@ -5673,22 +5755,23 @@ static int hclge_add_fd_entry(struct hnae3_handle *handle,
 	u8 action;
 	int ret;
 
-	if (!hnae3_dev_fd_supported(hdev))
+	if (!hnae3_dev_fd_supported(hdev)) {
+		dev_err(&hdev->pdev->dev,
+			"flow table director is not supported\n");
 		return -EOPNOTSUPP;
+	}
 
 	if (!hdev->fd_en) {
-		dev_warn(&hdev->pdev->dev,
-			 "Please enable flow director first\n");
+		dev_err(&hdev->pdev->dev,
+			"please enable flow director first\n");
 		return -EOPNOTSUPP;
 	}
 
 	fs = (struct ethtool_rx_flow_spec *)&cmd->fs;
 
 	ret = hclge_fd_check_spec(hdev, fs, &unused);
-	if (ret) {
-		dev_err(&hdev->pdev->dev, "Check fd spec failed\n");
+	if (ret)
 		return ret;
-	}
 
 	if (fs->ring_cookie == RX_CLS_FLOW_DISC) {
 		action = HCLGE_FD_ACTION_DROP_PACKET;
@@ -5729,7 +5812,6 @@ static int hclge_add_fd_entry(struct hnae3_handle *handle,
 	}
 
 	rule->flow_type = fs->flow_type;
-
 	rule->location = fs->location;
 	rule->unused_tuple = unused;
 	rule->vf_id = dst_vport_id;
@@ -5877,178 +5959,131 @@ static int hclge_get_fd_rule_cnt(struct hnae3_handle *handle,
 	return 0;
 }
 
-static int hclge_get_fd_rule_info(struct hnae3_handle *handle,
-				  struct ethtool_rxnfc *cmd)
+static void hclge_fd_get_tcpip4_info(struct hclge_fd_rule *rule,
+				     struct ethtool_tcpip4_spec *spec,
+				     struct ethtool_tcpip4_spec *spec_mask)
 {
-	struct hclge_vport *vport = hclge_get_vport(handle);
-	struct hclge_fd_rule *rule = NULL;
-	struct hclge_dev *hdev = vport->back;
-	struct ethtool_rx_flow_spec *fs;
-	struct hlist_node *node2;
-
-	if (!hnae3_dev_fd_supported(hdev))
-		return -EOPNOTSUPP;
-
-	fs = (struct ethtool_rx_flow_spec *)&cmd->fs;
-
-	spin_lock_bh(&hdev->fd_rule_lock);
-
-	hlist_for_each_entry_safe(rule, node2, &hdev->fd_rule_list, rule_node) {
-		if (rule->location >= fs->location)
-			break;
-	}
-
-	if (!rule || fs->location != rule->location) {
-		spin_unlock_bh(&hdev->fd_rule_lock);
-
-		return -ENOENT;
-	}
-
-	fs->flow_type = rule->flow_type;
-	switch (fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) {
-	case SCTP_V4_FLOW:
-	case TCP_V4_FLOW:
-	case UDP_V4_FLOW:
-		fs->h_u.tcp_ip4_spec.ip4src =
-				cpu_to_be32(rule->tuples.src_ip[IPV4_INDEX]);
-		fs->m_u.tcp_ip4_spec.ip4src =
-			rule->unused_tuple & BIT(INNER_SRC_IP) ?
+	spec->ip4src = cpu_to_be32(rule->tuples.src_ip[IPV4_INDEX]);
+	spec_mask->ip4src = rule->unused_tuple & BIT(INNER_SRC_IP) ?
 			0 : cpu_to_be32(rule->tuples_mask.src_ip[IPV4_INDEX]);
 
-		fs->h_u.tcp_ip4_spec.ip4dst =
-				cpu_to_be32(rule->tuples.dst_ip[IPV4_INDEX]);
-		fs->m_u.tcp_ip4_spec.ip4dst =
-			rule->unused_tuple & BIT(INNER_DST_IP) ?
+	spec->ip4dst = cpu_to_be32(rule->tuples.dst_ip[IPV4_INDEX]);
+	spec_mask->ip4dst = rule->unused_tuple & BIT(INNER_DST_IP) ?
 			0 : cpu_to_be32(rule->tuples_mask.dst_ip[IPV4_INDEX]);
 
-		fs->h_u.tcp_ip4_spec.psrc = cpu_to_be16(rule->tuples.src_port);
-		fs->m_u.tcp_ip4_spec.psrc =
-				rule->unused_tuple & BIT(INNER_SRC_PORT) ?
-				0 : cpu_to_be16(rule->tuples_mask.src_port);
+	spec->psrc = cpu_to_be16(rule->tuples.src_port);
+	spec_mask->psrc = rule->unused_tuple & BIT(INNER_SRC_PORT) ?
+			0 : cpu_to_be16(rule->tuples_mask.src_port);
 
-		fs->h_u.tcp_ip4_spec.pdst = cpu_to_be16(rule->tuples.dst_port);
-		fs->m_u.tcp_ip4_spec.pdst =
-				rule->unused_tuple & BIT(INNER_DST_PORT) ?
-				0 : cpu_to_be16(rule->tuples_mask.dst_port);
+	spec->pdst = cpu_to_be16(rule->tuples.dst_port);
+	spec_mask->pdst = rule->unused_tuple & BIT(INNER_DST_PORT) ?
+			0 : cpu_to_be16(rule->tuples_mask.dst_port);
 
-		fs->h_u.tcp_ip4_spec.tos = rule->tuples.ip_tos;
-		fs->m_u.tcp_ip4_spec.tos =
-				rule->unused_tuple & BIT(INNER_IP_TOS) ?
-				0 : rule->tuples_mask.ip_tos;
+	spec->tos = rule->tuples.ip_tos;
+	spec_mask->tos = rule->unused_tuple & BIT(INNER_IP_TOS) ?
+			0 : rule->tuples_mask.ip_tos;
+}
 
-		break;
-	case IP_USER_FLOW:
-		fs->h_u.usr_ip4_spec.ip4src =
-				cpu_to_be32(rule->tuples.src_ip[IPV4_INDEX]);
-		fs->m_u.tcp_ip4_spec.ip4src =
-			rule->unused_tuple & BIT(INNER_SRC_IP) ?
+static void hclge_fd_get_ip4_info(struct hclge_fd_rule *rule,
+				  struct ethtool_usrip4_spec *spec,
+				  struct ethtool_usrip4_spec *spec_mask)
+{
+	spec->ip4src = cpu_to_be32(rule->tuples.src_ip[IPV4_INDEX]);
+	spec_mask->ip4src = rule->unused_tuple & BIT(INNER_SRC_IP) ?
 			0 : cpu_to_be32(rule->tuples_mask.src_ip[IPV4_INDEX]);
 
-		fs->h_u.usr_ip4_spec.ip4dst =
-				cpu_to_be32(rule->tuples.dst_ip[IPV4_INDEX]);
-		fs->m_u.usr_ip4_spec.ip4dst =
-			rule->unused_tuple & BIT(INNER_DST_IP) ?
+	spec->ip4dst = cpu_to_be32(rule->tuples.dst_ip[IPV4_INDEX]);
+	spec_mask->ip4dst = rule->unused_tuple & BIT(INNER_DST_IP) ?
 			0 : cpu_to_be32(rule->tuples_mask.dst_ip[IPV4_INDEX]);
 
-		fs->h_u.usr_ip4_spec.tos = rule->tuples.ip_tos;
-		fs->m_u.usr_ip4_spec.tos =
-				rule->unused_tuple & BIT(INNER_IP_TOS) ?
-				0 : rule->tuples_mask.ip_tos;
+	spec->tos = rule->tuples.ip_tos;
+	spec_mask->tos = rule->unused_tuple & BIT(INNER_IP_TOS) ?
+			0 : rule->tuples_mask.ip_tos;
 
-		fs->h_u.usr_ip4_spec.proto = rule->tuples.ip_proto;
-		fs->m_u.usr_ip4_spec.proto =
-				rule->unused_tuple & BIT(INNER_IP_PROTO) ?
-				0 : rule->tuples_mask.ip_proto;
+	spec->proto = rule->tuples.ip_proto;
+	spec_mask->proto = rule->unused_tuple & BIT(INNER_IP_PROTO) ?
+			0 : rule->tuples_mask.ip_proto;
 
-		fs->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4;
+	spec->ip_ver = ETH_RX_NFC_IP4;
+}
 
-		break;
-	case SCTP_V6_FLOW:
-	case TCP_V6_FLOW:
-	case UDP_V6_FLOW:
-		cpu_to_be32_array(fs->h_u.tcp_ip6_spec.ip6src,
-				  rule->tuples.src_ip, IPV6_SIZE);
-		if (rule->unused_tuple & BIT(INNER_SRC_IP))
-			memset(fs->m_u.tcp_ip6_spec.ip6src, 0,
-			       sizeof(int) * IPV6_SIZE);
-		else
-			cpu_to_be32_array(fs->m_u.tcp_ip6_spec.ip6src,
-					  rule->tuples_mask.src_ip, IPV6_SIZE);
-
-		cpu_to_be32_array(fs->h_u.tcp_ip6_spec.ip6dst,
-				  rule->tuples.dst_ip, IPV6_SIZE);
-		if (rule->unused_tuple & BIT(INNER_DST_IP))
-			memset(fs->m_u.tcp_ip6_spec.ip6dst, 0,
-			       sizeof(int) * IPV6_SIZE);
-		else
-			cpu_to_be32_array(fs->m_u.tcp_ip6_spec.ip6dst,
-					  rule->tuples_mask.dst_ip, IPV6_SIZE);
+static void hclge_fd_get_tcpip6_info(struct hclge_fd_rule *rule,
+				     struct ethtool_tcpip6_spec *spec,
+				     struct ethtool_tcpip6_spec *spec_mask)
+{
+	cpu_to_be32_array(spec->ip6src,
+			  rule->tuples.src_ip, IPV6_SIZE);
+	cpu_to_be32_array(spec->ip6dst,
+			  rule->tuples.dst_ip, IPV6_SIZE);
+	if (rule->unused_tuple & BIT(INNER_SRC_IP))
+		memset(spec_mask->ip6src, 0, sizeof(spec_mask->ip6src));
+	else
+		cpu_to_be32_array(spec_mask->ip6src, rule->tuples_mask.src_ip,
+				  IPV6_SIZE);
 
-		fs->h_u.tcp_ip6_spec.psrc = cpu_to_be16(rule->tuples.src_port);
-		fs->m_u.tcp_ip6_spec.psrc =
-				rule->unused_tuple & BIT(INNER_SRC_PORT) ?
-				0 : cpu_to_be16(rule->tuples_mask.src_port);
+	if (rule->unused_tuple & BIT(INNER_DST_IP))
+		memset(spec_mask->ip6dst, 0, sizeof(spec_mask->ip6dst));
+	else
+		cpu_to_be32_array(spec_mask->ip6dst, rule->tuples_mask.dst_ip,
+				  IPV6_SIZE);
 
-		fs->h_u.tcp_ip6_spec.pdst = cpu_to_be16(rule->tuples.dst_port);
-		fs->m_u.tcp_ip6_spec.pdst =
-				rule->unused_tuple & BIT(INNER_DST_PORT) ?
-				0 : cpu_to_be16(rule->tuples_mask.dst_port);
+	spec->psrc = cpu_to_be16(rule->tuples.src_port);
+	spec_mask->psrc = rule->unused_tuple & BIT(INNER_SRC_PORT) ?
+			0 : cpu_to_be16(rule->tuples_mask.src_port);
 
-		break;
-	case IPV6_USER_FLOW:
-		cpu_to_be32_array(fs->h_u.usr_ip6_spec.ip6src,
-				  rule->tuples.src_ip, IPV6_SIZE);
-		if (rule->unused_tuple & BIT(INNER_SRC_IP))
-			memset(fs->m_u.usr_ip6_spec.ip6src, 0,
-			       sizeof(int) * IPV6_SIZE);
-		else
-			cpu_to_be32_array(fs->m_u.usr_ip6_spec.ip6src,
-					  rule->tuples_mask.src_ip, IPV6_SIZE);
-
-		cpu_to_be32_array(fs->h_u.usr_ip6_spec.ip6dst,
-				  rule->tuples.dst_ip, IPV6_SIZE);
-		if (rule->unused_tuple & BIT(INNER_DST_IP))
-			memset(fs->m_u.usr_ip6_spec.ip6dst, 0,
-			       sizeof(int) * IPV6_SIZE);
-		else
-			cpu_to_be32_array(fs->m_u.usr_ip6_spec.ip6dst,
-					  rule->tuples_mask.dst_ip, IPV6_SIZE);
+	spec->pdst = cpu_to_be16(rule->tuples.dst_port);
+	spec_mask->pdst = rule->unused_tuple & BIT(INNER_DST_PORT) ?
+			0 : cpu_to_be16(rule->tuples_mask.dst_port);
+}
 
-		fs->h_u.usr_ip6_spec.l4_proto = rule->tuples.ip_proto;
-		fs->m_u.usr_ip6_spec.l4_proto =
-				rule->unused_tuple & BIT(INNER_IP_PROTO) ?
-				0 : rule->tuples_mask.ip_proto;
+static void hclge_fd_get_ip6_info(struct hclge_fd_rule *rule,
+				  struct ethtool_usrip6_spec *spec,
+				  struct ethtool_usrip6_spec *spec_mask)
+{
+	cpu_to_be32_array(spec->ip6src, rule->tuples.src_ip, IPV6_SIZE);
+	cpu_to_be32_array(spec->ip6dst, rule->tuples.dst_ip, IPV6_SIZE);
+	if (rule->unused_tuple & BIT(INNER_SRC_IP))
+		memset(spec_mask->ip6src, 0, sizeof(spec_mask->ip6src));
+	else
+		cpu_to_be32_array(spec_mask->ip6src,
+				  rule->tuples_mask.src_ip, IPV6_SIZE);
 
-		break;
-	case ETHER_FLOW:
-		ether_addr_copy(fs->h_u.ether_spec.h_source,
-				rule->tuples.src_mac);
-		if (rule->unused_tuple & BIT(INNER_SRC_MAC))
-			eth_zero_addr(fs->m_u.ether_spec.h_source);
-		else
-			ether_addr_copy(fs->m_u.ether_spec.h_source,
-					rule->tuples_mask.src_mac);
+	if (rule->unused_tuple & BIT(INNER_DST_IP))
+		memset(spec_mask->ip6dst, 0, sizeof(spec_mask->ip6dst));
+	else
+		cpu_to_be32_array(spec_mask->ip6dst,
+				  rule->tuples_mask.dst_ip, IPV6_SIZE);
 
-		ether_addr_copy(fs->h_u.ether_spec.h_dest,
-				rule->tuples.dst_mac);
-		if (rule->unused_tuple & BIT(INNER_DST_MAC))
-			eth_zero_addr(fs->m_u.ether_spec.h_dest);
-		else
-			ether_addr_copy(fs->m_u.ether_spec.h_dest,
-					rule->tuples_mask.dst_mac);
+	spec->l4_proto = rule->tuples.ip_proto;
+	spec_mask->l4_proto = rule->unused_tuple & BIT(INNER_IP_PROTO) ?
+			0 : rule->tuples_mask.ip_proto;
+}
 
-		fs->h_u.ether_spec.h_proto =
-				cpu_to_be16(rule->tuples.ether_proto);
-		fs->m_u.ether_spec.h_proto =
-				rule->unused_tuple & BIT(INNER_ETH_TYPE) ?
-				0 : cpu_to_be16(rule->tuples_mask.ether_proto);
+static void hclge_fd_get_ether_info(struct hclge_fd_rule *rule,
+				    struct ethhdr *spec,
+				    struct ethhdr *spec_mask)
+{
+	ether_addr_copy(spec->h_source, rule->tuples.src_mac);
+	ether_addr_copy(spec->h_dest, rule->tuples.dst_mac);
 
-		break;
-	default:
-		spin_unlock_bh(&hdev->fd_rule_lock);
-		return -EOPNOTSUPP;
-	}
+	if (rule->unused_tuple & BIT(INNER_SRC_MAC))
+		eth_zero_addr(spec_mask->h_source);
+	else
+		ether_addr_copy(spec_mask->h_source, rule->tuples_mask.src_mac);
+
+	if (rule->unused_tuple & BIT(INNER_DST_MAC))
+		eth_zero_addr(spec_mask->h_dest);
+	else
+		ether_addr_copy(spec_mask->h_dest, rule->tuples_mask.dst_mac);
+
+	spec->h_proto = cpu_to_be16(rule->tuples.ether_proto);
+	spec_mask->h_proto = rule->unused_tuple & BIT(INNER_ETH_TYPE) ?
+			0 : cpu_to_be16(rule->tuples_mask.ether_proto);
+}
 
+static void hclge_fd_get_ext_info(struct ethtool_rx_flow_spec *fs,
+				  struct hclge_fd_rule *rule)
+{
 	if (fs->flow_type & FLOW_EXT) {
 		fs->h_ext.vlan_tci = cpu_to_be16(rule->tuples.vlan_tag1);
 		fs->m_ext.vlan_tci =
@@ -6065,51 +6100,113 @@ static int hclge_get_fd_rule_info(struct hnae3_handle *handle,
 			ether_addr_copy(fs->m_u.ether_spec.h_dest,
 					rule->tuples_mask.dst_mac);
 	}
-
-	if (rule->action == HCLGE_FD_ACTION_DROP_PACKET) {
-		fs->ring_cookie = RX_CLS_FLOW_DISC;
-	} else {
-		u64 vf_id;
-
-		fs->ring_cookie = rule->queue_id;
-		vf_id = rule->vf_id;
-		vf_id <<= ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF;
-		fs->ring_cookie |= vf_id;
-	}
-
-	spin_unlock_bh(&hdev->fd_rule_lock);
-
-	return 0;
 }
 
-static int hclge_get_all_rules(struct hnae3_handle *handle,
-			       struct ethtool_rxnfc *cmd, u32 *rule_locs)
+static int hclge_get_fd_rule_info(struct hnae3_handle *handle,
+				  struct ethtool_rxnfc *cmd)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_fd_rule *rule = NULL;
 	struct hclge_dev *hdev = vport->back;
-	struct hclge_fd_rule *rule;
+	struct ethtool_rx_flow_spec *fs;
 	struct hlist_node *node2;
-	int cnt = 0;
 
 	if (!hnae3_dev_fd_supported(hdev))
 		return -EOPNOTSUPP;
 
-	cmd->data = hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1];
+	fs = (struct ethtool_rx_flow_spec *)&cmd->fs;
 
 	spin_lock_bh(&hdev->fd_rule_lock);
-	hlist_for_each_entry_safe(rule, node2,
-				  &hdev->fd_rule_list, rule_node) {
-		if (cnt == cmd->rule_cnt) {
-			spin_unlock_bh(&hdev->fd_rule_lock);
-			return -EMSGSIZE;
-		}
 
-		rule_locs[cnt] = rule->location;
-		cnt++;
+	hlist_for_each_entry_safe(rule, node2, &hdev->fd_rule_list, rule_node) {
+		if (rule->location >= fs->location)
+			break;
 	}
 
-	spin_unlock_bh(&hdev->fd_rule_lock);
-
+	if (!rule || fs->location != rule->location) {
+		spin_unlock_bh(&hdev->fd_rule_lock);
+
+		return -ENOENT;
+	}
+
+	fs->flow_type = rule->flow_type;
+	switch (fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) {
+	case SCTP_V4_FLOW:
+	case TCP_V4_FLOW:
+	case UDP_V4_FLOW:
+		hclge_fd_get_tcpip4_info(rule, &fs->h_u.tcp_ip4_spec,
+					 &fs->m_u.tcp_ip4_spec);
+		break;
+	case IP_USER_FLOW:
+		hclge_fd_get_ip4_info(rule, &fs->h_u.usr_ip4_spec,
+				      &fs->m_u.usr_ip4_spec);
+		break;
+	case SCTP_V6_FLOW:
+	case TCP_V6_FLOW:
+	case UDP_V6_FLOW:
+		hclge_fd_get_tcpip6_info(rule, &fs->h_u.tcp_ip6_spec,
+					 &fs->m_u.tcp_ip6_spec);
+		break;
+	case IPV6_USER_FLOW:
+		hclge_fd_get_ip6_info(rule, &fs->h_u.usr_ip6_spec,
+				      &fs->m_u.usr_ip6_spec);
+		break;
+	/* The flow type of fd rule has been checked before adding in to rule
+	 * list. As other flow types have been handled, it must be ETHER_FLOW
+	 * for the default case
+	 */
+	default:
+		hclge_fd_get_ether_info(rule, &fs->h_u.ether_spec,
+					&fs->m_u.ether_spec);
+		break;
+	}
+
+	hclge_fd_get_ext_info(fs, rule);
+
+	if (rule->action == HCLGE_FD_ACTION_DROP_PACKET) {
+		fs->ring_cookie = RX_CLS_FLOW_DISC;
+	} else {
+		u64 vf_id;
+
+		fs->ring_cookie = rule->queue_id;
+		vf_id = rule->vf_id;
+		vf_id <<= ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF;
+		fs->ring_cookie |= vf_id;
+	}
+
+	spin_unlock_bh(&hdev->fd_rule_lock);
+
+	return 0;
+}
+
+static int hclge_get_all_rules(struct hnae3_handle *handle,
+			       struct ethtool_rxnfc *cmd, u32 *rule_locs)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+	struct hclge_fd_rule *rule;
+	struct hlist_node *node2;
+	int cnt = 0;
+
+	if (!hnae3_dev_fd_supported(hdev))
+		return -EOPNOTSUPP;
+
+	cmd->data = hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1];
+
+	spin_lock_bh(&hdev->fd_rule_lock);
+	hlist_for_each_entry_safe(rule, node2,
+				  &hdev->fd_rule_list, rule_node) {
+		if (cnt == cmd->rule_cnt) {
+			spin_unlock_bh(&hdev->fd_rule_lock);
+			return -EMSGSIZE;
+		}
+
+		rule_locs[cnt] = rule->location;
+		cnt++;
+	}
+
+	spin_unlock_bh(&hdev->fd_rule_lock);
+
 	cmd->rule_cnt = cnt;
 
 	return 0;
@@ -6202,7 +6299,6 @@ static int hclge_add_fd_entry_by_arfs(struct hnae3_handle *handle, u16 queue_id,
 	 */
 	if (hdev->fd_active_type == HCLGE_FD_EP_ACTIVE) {
 		spin_unlock_bh(&hdev->fd_rule_lock);
-
 		return -EOPNOTSUPP;
 	}
 
@@ -6216,14 +6312,12 @@ static int hclge_add_fd_entry_by_arfs(struct hnae3_handle *handle, u16 queue_id,
 		bit_id = find_first_zero_bit(hdev->fd_bmap, MAX_FD_FILTER_NUM);
 		if (bit_id >= hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1]) {
 			spin_unlock_bh(&hdev->fd_rule_lock);
-
 			return -ENOSPC;
 		}
 
 		rule = kzalloc(sizeof(*rule), GFP_ATOMIC);
 		if (!rule) {
 			spin_unlock_bh(&hdev->fd_rule_lock);
-
 			return -ENOMEM;
 		}
 
@@ -6834,8 +6928,22 @@ static void hclge_ae_stop(struct hnae3_handle *handle)
 
 int hclge_vport_start(struct hclge_vport *vport)
 {
+	struct hclge_dev *hdev = vport->back;
+
 	set_bit(HCLGE_VPORT_STATE_ALIVE, &vport->state);
 	vport->last_active_jiffies = jiffies;
+
+	if (test_bit(vport->vport_id, hdev->vport_config_block)) {
+		if (vport->vport_id) {
+			hclge_restore_mac_table_common(vport);
+			hclge_restore_vport_vlan_table(vport);
+		} else {
+			hclge_restore_hw_table(hdev);
+		}
+	}
+
+	clear_bit(vport->vport_id, hdev->vport_config_block);
+
 	return 0;
 }
 
@@ -6872,17 +6980,11 @@ static int hclge_get_mac_vlan_cmd_status(struct hclge_vport *vport,
 	}
 
 	if (op == HCLGE_MAC_VLAN_ADD) {
-		if ((!resp_code) || (resp_code == 1)) {
+		if (!resp_code || resp_code == 1)
 			return 0;
-		} else if (resp_code == HCLGE_ADD_UC_OVERFLOW) {
-			dev_err(&hdev->pdev->dev,
-				"add mac addr failed for uc_overflow.\n");
-			return -ENOSPC;
-		} else if (resp_code == HCLGE_ADD_MC_OVERFLOW) {
-			dev_err(&hdev->pdev->dev,
-				"add mac addr failed for mc_overflow.\n");
+		else if (resp_code == HCLGE_ADD_UC_OVERFLOW ||
+			 resp_code == HCLGE_ADD_MC_OVERFLOW)
 			return -ENOSPC;
-		}
 
 		dev_err(&hdev->pdev->dev,
 			"add mac addr failed for undefined, code=%u.\n",
@@ -7106,52 +7208,8 @@ static int hclge_add_mac_vlan_tbl(struct hclge_vport *vport,
 	return cfg_status;
 }
 
-static int hclge_init_umv_space(struct hclge_dev *hdev)
-{
-	u16 allocated_size = 0;
-	int ret;
-
-	ret = hclge_set_umv_space(hdev, hdev->wanted_umv_size, &allocated_size,
-				  true);
-	if (ret)
-		return ret;
-
-	if (allocated_size < hdev->wanted_umv_size)
-		dev_warn(&hdev->pdev->dev,
-			 "Alloc umv space failed, want %u, get %u\n",
-			 hdev->wanted_umv_size, allocated_size);
-
-	mutex_init(&hdev->umv_mutex);
-	hdev->max_umv_size = allocated_size;
-	/* divide max_umv_size by (hdev->num_req_vfs + 2), in order to
-	 * preserve some unicast mac vlan table entries shared by pf
-	 * and its vfs.
-	 */
-	hdev->priv_umv_size = hdev->max_umv_size / (hdev->num_req_vfs + 2);
-	hdev->share_umv_size = hdev->priv_umv_size +
-			hdev->max_umv_size % (hdev->num_req_vfs + 2);
-
-	return 0;
-}
-
-static int hclge_uninit_umv_space(struct hclge_dev *hdev)
-{
-	int ret;
-
-	if (hdev->max_umv_size > 0) {
-		ret = hclge_set_umv_space(hdev, hdev->max_umv_size, NULL,
-					  false);
-		if (ret)
-			return ret;
-		hdev->max_umv_size = 0;
-	}
-	mutex_destroy(&hdev->umv_mutex);
-
-	return 0;
-}
-
 static int hclge_set_umv_space(struct hclge_dev *hdev, u16 space_size,
-			       u16 *allocated_size, bool is_alloc)
+			       u16 *allocated_size)
 {
 	struct hclge_umv_spc_alc_cmd *req;
 	struct hclge_desc desc;
@@ -7159,21 +7217,39 @@ static int hclge_set_umv_space(struct hclge_dev *hdev, u16 space_size,
 
 	req = (struct hclge_umv_spc_alc_cmd *)desc.data;
 	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_ALLOCATE, false);
-	if (!is_alloc)
-		hnae3_set_bit(req->allocate, HCLGE_UMV_SPC_ALC_B, 1);
 
 	req->space_size = cpu_to_le32(space_size);
 
 	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
 	if (ret) {
-		dev_err(&hdev->pdev->dev,
-			"%s umv space failed for cmd_send, ret =%d\n",
-			is_alloc ? "allocate" : "free", ret);
+		dev_err(&hdev->pdev->dev, "failed to set umv space, ret = %d\n",
+			ret);
 		return ret;
 	}
 
-	if (is_alloc && allocated_size)
-		*allocated_size = le32_to_cpu(desc.data[1]);
+	*allocated_size = le32_to_cpu(desc.data[1]);
+
+	return 0;
+}
+
+static int hclge_init_umv_space(struct hclge_dev *hdev)
+{
+	u16 allocated_size = 0;
+	int ret;
+
+	ret = hclge_set_umv_space(hdev, hdev->wanted_umv_size, &allocated_size);
+	if (ret)
+		return ret;
+
+	if (allocated_size < hdev->wanted_umv_size)
+		dev_warn(&hdev->pdev->dev,
+			 "failed to alloc umv space, want %u, get %u\n",
+			 hdev->wanted_umv_size, allocated_size);
+
+	hdev->max_umv_size = allocated_size;
+	hdev->priv_umv_size = hdev->max_umv_size / (hdev->num_alloc_vport + 1);
+	hdev->share_umv_size = hdev->priv_umv_size +
+			hdev->max_umv_size % (hdev->num_alloc_vport + 1);
 
 	return 0;
 }
@@ -7188,21 +7264,25 @@ static void hclge_reset_umv_space(struct hclge_dev *hdev)
 		vport->used_umv_num = 0;
 	}
 
-	mutex_lock(&hdev->umv_mutex);
+	mutex_lock(&hdev->vport_lock);
 	hdev->share_umv_size = hdev->priv_umv_size +
-			hdev->max_umv_size % (hdev->num_req_vfs + 2);
-	mutex_unlock(&hdev->umv_mutex);
+			hdev->max_umv_size % (hdev->num_alloc_vport + 1);
+	mutex_unlock(&hdev->vport_lock);
 }
 
-static bool hclge_is_umv_space_full(struct hclge_vport *vport)
+static bool hclge_is_umv_space_full(struct hclge_vport *vport, bool need_lock)
 {
 	struct hclge_dev *hdev = vport->back;
 	bool is_full;
 
-	mutex_lock(&hdev->umv_mutex);
+	if (need_lock)
+		mutex_lock(&hdev->vport_lock);
+
 	is_full = (vport->used_umv_num >= hdev->priv_umv_size &&
 		   hdev->share_umv_size == 0);
-	mutex_unlock(&hdev->umv_mutex);
+
+	if (need_lock)
+		mutex_unlock(&hdev->vport_lock);
 
 	return is_full;
 }
@@ -7211,7 +7291,6 @@ static void hclge_update_umv_space(struct hclge_vport *vport, bool is_free)
 {
 	struct hclge_dev *hdev = vport->back;
 
-	mutex_lock(&hdev->umv_mutex);
 	if (is_free) {
 		if (vport->used_umv_num > hdev->priv_umv_size)
 			hdev->share_umv_size++;
@@ -7224,7 +7303,99 @@ static void hclge_update_umv_space(struct hclge_vport *vport, bool is_free)
 			hdev->share_umv_size--;
 		vport->used_umv_num++;
 	}
-	mutex_unlock(&hdev->umv_mutex);
+}
+
+static struct hclge_mac_node *hclge_find_mac_node(struct list_head *list,
+						  const u8 *mac_addr)
+{
+	struct hclge_mac_node *mac_node, *tmp;
+
+	list_for_each_entry_safe(mac_node, tmp, list, node)
+		if (ether_addr_equal(mac_addr, mac_node->mac_addr))
+			return mac_node;
+
+	return NULL;
+}
+
+static void hclge_update_mac_node(struct hclge_mac_node *mac_node,
+				  enum HCLGE_MAC_NODE_STATE state)
+{
+	switch (state) {
+	/* from set_rx_mode or tmp_add_list */
+	case HCLGE_MAC_TO_ADD:
+		if (mac_node->state == HCLGE_MAC_TO_DEL)
+			mac_node->state = HCLGE_MAC_ACTIVE;
+		break;
+	/* only from set_rx_mode */
+	case HCLGE_MAC_TO_DEL:
+		if (mac_node->state == HCLGE_MAC_TO_ADD) {
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		} else {
+			mac_node->state = HCLGE_MAC_TO_DEL;
+		}
+		break;
+	/* only from tmp_add_list, the mac_node->state won't be
+	 * ACTIVE.
+	 */
+	case HCLGE_MAC_ACTIVE:
+		if (mac_node->state == HCLGE_MAC_TO_ADD)
+			mac_node->state = HCLGE_MAC_ACTIVE;
+
+		break;
+	}
+}
+
+int hclge_update_mac_list(struct hclge_vport *vport,
+			  enum HCLGE_MAC_NODE_STATE state,
+			  enum HCLGE_MAC_ADDR_TYPE mac_type,
+			  const unsigned char *addr)
+{
+	struct hclge_dev *hdev = vport->back;
+	struct hclge_mac_node *mac_node;
+	struct list_head *list;
+
+	list = (mac_type == HCLGE_MAC_ADDR_UC) ?
+		&vport->uc_mac_list : &vport->mc_mac_list;
+
+	spin_lock_bh(&vport->mac_list_lock);
+
+	/* if the mac addr is already in the mac list, no need to add a new
+	 * one into it, just check the mac addr state, convert it to a new
+	 * new state, or just remove it, or do nothing.
+	 */
+	mac_node = hclge_find_mac_node(list, addr);
+	if (mac_node) {
+		hclge_update_mac_node(mac_node, state);
+		spin_unlock_bh(&vport->mac_list_lock);
+		set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE, &vport->state);
+		return 0;
+	}
+
+	/* if this address is never added, unnecessary to delete */
+	if (state == HCLGE_MAC_TO_DEL) {
+		spin_unlock_bh(&vport->mac_list_lock);
+		dev_err(&hdev->pdev->dev,
+			"failed to delete address %pM from mac list\n",
+			addr);
+		return -ENOENT;
+	}
+
+	mac_node = kzalloc(sizeof(*mac_node), GFP_ATOMIC);
+	if (!mac_node) {
+		spin_unlock_bh(&vport->mac_list_lock);
+		return -ENOMEM;
+	}
+
+	set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE, &vport->state);
+
+	mac_node->state = state;
+	ether_addr_copy(mac_node->mac_addr, addr);
+	list_add_tail(&mac_node->node, list);
+
+	spin_unlock_bh(&vport->mac_list_lock);
+
+	return 0;
 }
 
 static int hclge_add_uc_addr(struct hnae3_handle *handle,
@@ -7232,7 +7403,8 @@ static int hclge_add_uc_addr(struct hnae3_handle *handle,
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
 
-	return hclge_add_uc_addr_common(vport, addr);
+	return hclge_update_mac_list(vport, HCLGE_MAC_TO_ADD, HCLGE_MAC_ADDR_UC,
+				     addr);
 }
 
 int hclge_add_uc_addr_common(struct hclge_vport *vport,
@@ -7271,15 +7443,19 @@ int hclge_add_uc_addr_common(struct hclge_vport *vport,
 	 */
 	ret = hclge_lookup_mac_vlan_tbl(vport, &req, &desc, false);
 	if (ret == -ENOENT) {
-		if (!hclge_is_umv_space_full(vport)) {
+		mutex_lock(&hdev->vport_lock);
+		if (!hclge_is_umv_space_full(vport, false)) {
 			ret = hclge_add_mac_vlan_tbl(vport, &req, NULL);
 			if (!ret)
 				hclge_update_umv_space(vport, false);
+			mutex_unlock(&hdev->vport_lock);
 			return ret;
 		}
+		mutex_unlock(&hdev->vport_lock);
 
-		dev_err(&hdev->pdev->dev, "UC MAC table full(%u)\n",
-			hdev->priv_umv_size);
+		if (!(vport->overflow_promisc_flags & HNAE3_OVERFLOW_UPE))
+			dev_err(&hdev->pdev->dev, "UC MAC table full(%u)\n",
+				hdev->priv_umv_size);
 
 		return -ENOSPC;
 	}
@@ -7303,7 +7479,8 @@ static int hclge_rm_uc_addr(struct hnae3_handle *handle,
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
 
-	return hclge_rm_uc_addr_common(vport, addr);
+	return hclge_update_mac_list(vport, HCLGE_MAC_TO_DEL, HCLGE_MAC_ADDR_UC,
+				     addr);
 }
 
 int hclge_rm_uc_addr_common(struct hclge_vport *vport,
@@ -7326,8 +7503,13 @@ int hclge_rm_uc_addr_common(struct hclge_vport *vport,
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
 	hclge_prepare_mac_addr(&req, addr, false);
 	ret = hclge_remove_mac_vlan_tbl(vport, &req);
-	if (!ret)
+	if (!ret) {
+		mutex_lock(&hdev->vport_lock);
 		hclge_update_umv_space(vport, true);
+		mutex_unlock(&hdev->vport_lock);
+	} else if (ret == -ENOENT) {
+		ret = 0;
+	}
 
 	return ret;
 }
@@ -7337,7 +7519,8 @@ static int hclge_add_mc_addr(struct hnae3_handle *handle,
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
 
-	return hclge_add_mc_addr_common(vport, addr);
+	return hclge_update_mac_list(vport, HCLGE_MAC_TO_ADD, HCLGE_MAC_ADDR_MC,
+				     addr);
 }
 
 int hclge_add_mc_addr_common(struct hclge_vport *vport,
@@ -7369,7 +7552,9 @@ int hclge_add_mc_addr_common(struct hclge_vport *vport,
 		return status;
 	status = hclge_add_mac_vlan_tbl(vport, &req, desc);
 
-	if (status == -ENOSPC)
+	/* if already overflow, not to print each time */
+	if (status == -ENOSPC &&
+	    !(vport->overflow_promisc_flags & HNAE3_OVERFLOW_MPE))
 		dev_err(&hdev->pdev->dev, "mc mac vlan table is full\n");
 
 	return status;
@@ -7380,7 +7565,8 @@ static int hclge_rm_mc_addr(struct hnae3_handle *handle,
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
 
-	return hclge_rm_mc_addr_common(vport, addr);
+	return hclge_update_mac_list(vport, HCLGE_MAC_TO_DEL, HCLGE_MAC_ADDR_MC,
+				     addr);
 }
 
 int hclge_rm_mc_addr_common(struct hclge_vport *vport,
@@ -7415,111 +7601,354 @@ int hclge_rm_mc_addr_common(struct hclge_vport *vport,
 			/* Not all the vfid is zero, update the vfid */
 			status = hclge_add_mac_vlan_tbl(vport, &req, desc);
 
-	} else {
-		/* Maybe this mac address is in mta table, but it cannot be
-		 * deleted here because an entry of mta represents an address
-		 * range rather than a specific address. the delete action to
-		 * all entries will take effect in update_mta_status called by
-		 * hns3_nic_set_rx_mode.
-		 */
+	} else if (status == -ENOENT) {
 		status = 0;
 	}
 
 	return status;
 }
 
-void hclge_add_vport_mac_table(struct hclge_vport *vport, const u8 *mac_addr,
-			       enum HCLGE_MAC_ADDR_TYPE mac_type)
+static void hclge_sync_vport_mac_list(struct hclge_vport *vport,
+				      struct list_head *list,
+				      int (*sync)(struct hclge_vport *,
+						  const unsigned char *))
 {
-	struct hclge_vport_mac_addr_cfg *mac_cfg;
-	struct list_head *list;
+	struct hclge_mac_node *mac_node, *tmp;
+	int ret;
 
-	if (!vport->vport_id)
-		return;
+	list_for_each_entry_safe(mac_node, tmp, list, node) {
+		ret = sync(vport, mac_node->mac_addr);
+		if (!ret) {
+			mac_node->state = HCLGE_MAC_ACTIVE;
+		} else {
+			set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE,
+				&vport->state);
+			break;
+		}
+	}
+}
 
-	mac_cfg = kzalloc(sizeof(*mac_cfg), GFP_KERNEL);
-	if (!mac_cfg)
-		return;
+static void hclge_unsync_vport_mac_list(struct hclge_vport *vport,
+					struct list_head *list,
+					int (*unsync)(struct hclge_vport *,
+						      const unsigned char *))
+{
+	struct hclge_mac_node *mac_node, *tmp;
+	int ret;
+
+	list_for_each_entry_safe(mac_node, tmp, list, node) {
+		ret = unsync(vport, mac_node->mac_addr);
+		if (!ret || ret == -ENOENT) {
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		} else {
+			set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE,
+				&vport->state);
+			break;
+		}
+	}
+}
 
-	mac_cfg->hd_tbl_status = true;
-	memcpy(mac_cfg->mac_addr, mac_addr, ETH_ALEN);
+static bool hclge_sync_from_add_list(struct list_head *add_list,
+				     struct list_head *mac_list)
+{
+	struct hclge_mac_node *mac_node, *tmp, *new_node;
+	bool all_added = true;
 
-	list = (mac_type == HCLGE_MAC_ADDR_UC) ?
-	       &vport->uc_mac_list : &vport->mc_mac_list;
+	list_for_each_entry_safe(mac_node, tmp, add_list, node) {
+		if (mac_node->state == HCLGE_MAC_TO_ADD)
+			all_added = false;
 
-	list_add_tail(&mac_cfg->node, list);
+		/* if the mac address from tmp_add_list is not in the
+		 * uc/mc_mac_list, it means have received a TO_DEL request
+		 * during the time window of adding the mac address into mac
+		 * table. if mac_node state is ACTIVE, then change it to TO_DEL,
+		 * then it will be removed at next time. else it must be TO_ADD,
+		 * this address hasn't been added into mac table,
+		 * so just remove the mac node.
+		 */
+		new_node = hclge_find_mac_node(mac_list, mac_node->mac_addr);
+		if (new_node) {
+			hclge_update_mac_node(new_node, mac_node->state);
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		} else if (mac_node->state == HCLGE_MAC_ACTIVE) {
+			mac_node->state = HCLGE_MAC_TO_DEL;
+			list_del(&mac_node->node);
+			list_add_tail(&mac_node->node, mac_list);
+		} else {
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		}
+	}
+
+	return all_added;
 }
 
-void hclge_rm_vport_mac_table(struct hclge_vport *vport, const u8 *mac_addr,
-			      bool is_write_tbl,
-			      enum HCLGE_MAC_ADDR_TYPE mac_type)
+static void hclge_sync_from_del_list(struct list_head *del_list,
+				     struct list_head *mac_list)
 {
-	struct hclge_vport_mac_addr_cfg *mac_cfg, *tmp;
-	struct list_head *list;
-	bool uc_flag, mc_flag;
+	struct hclge_mac_node *mac_node, *tmp, *new_node;
 
-	list = (mac_type == HCLGE_MAC_ADDR_UC) ?
-	       &vport->uc_mac_list : &vport->mc_mac_list;
+	list_for_each_entry_safe(mac_node, tmp, del_list, node) {
+		new_node = hclge_find_mac_node(mac_list, mac_node->mac_addr);
+		if (new_node) {
+			/* If the mac addr exists in the mac list, it means
+			 * received a new TO_ADD request during the time window
+			 * of configuring the mac address. For the mac node
+			 * state is TO_ADD, and the address is already in the
+			 * in the hardware(due to delete fail), so we just need
+			 * to change the mac node state to ACTIVE.
+			 */
+			new_node->state = HCLGE_MAC_ACTIVE;
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		} else {
+			list_del(&mac_node->node);
+			list_add_tail(&mac_node->node, mac_list);
+		}
+	}
+}
 
-	uc_flag = is_write_tbl && mac_type == HCLGE_MAC_ADDR_UC;
-	mc_flag = is_write_tbl && mac_type == HCLGE_MAC_ADDR_MC;
+static void hclge_update_overflow_flags(struct hclge_vport *vport,
+					enum HCLGE_MAC_ADDR_TYPE mac_type,
+					bool is_all_added)
+{
+	if (mac_type == HCLGE_MAC_ADDR_UC) {
+		if (is_all_added)
+			vport->overflow_promisc_flags &= ~HNAE3_OVERFLOW_UPE;
+		else
+			vport->overflow_promisc_flags |= HNAE3_OVERFLOW_UPE;
+	} else {
+		if (is_all_added)
+			vport->overflow_promisc_flags &= ~HNAE3_OVERFLOW_MPE;
+		else
+			vport->overflow_promisc_flags |= HNAE3_OVERFLOW_MPE;
+	}
+}
 
-	list_for_each_entry_safe(mac_cfg, tmp, list, node) {
-		if (ether_addr_equal(mac_cfg->mac_addr, mac_addr)) {
-			if (uc_flag && mac_cfg->hd_tbl_status)
-				hclge_rm_uc_addr_common(vport, mac_addr);
+static void hclge_sync_vport_mac_table(struct hclge_vport *vport,
+				       enum HCLGE_MAC_ADDR_TYPE mac_type)
+{
+	struct hclge_mac_node *mac_node, *tmp, *new_node;
+	struct list_head tmp_add_list, tmp_del_list;
+	struct list_head *list;
+	bool all_added;
 
-			if (mc_flag && mac_cfg->hd_tbl_status)
-				hclge_rm_mc_addr_common(vport, mac_addr);
+	INIT_LIST_HEAD(&tmp_add_list);
+	INIT_LIST_HEAD(&tmp_del_list);
 
-			list_del(&mac_cfg->node);
-			kfree(mac_cfg);
+	/* move the mac addr to the tmp_add_list and tmp_del_list, then
+	 * we can add/delete these mac addr outside the spin lock
+	 */
+	list = (mac_type == HCLGE_MAC_ADDR_UC) ?
+		&vport->uc_mac_list : &vport->mc_mac_list;
+
+	spin_lock_bh(&vport->mac_list_lock);
+
+	list_for_each_entry_safe(mac_node, tmp, list, node) {
+		switch (mac_node->state) {
+		case HCLGE_MAC_TO_DEL:
+			list_del(&mac_node->node);
+			list_add_tail(&mac_node->node, &tmp_del_list);
+			break;
+		case HCLGE_MAC_TO_ADD:
+			new_node = kzalloc(sizeof(*new_node), GFP_ATOMIC);
+			if (!new_node)
+				goto stop_traverse;
+			ether_addr_copy(new_node->mac_addr, mac_node->mac_addr);
+			new_node->state = mac_node->state;
+			list_add_tail(&new_node->node, &tmp_add_list);
+			break;
+		default:
 			break;
 		}
 	}
+
+stop_traverse:
+	spin_unlock_bh(&vport->mac_list_lock);
+
+	/* delete first, in order to get max mac table space for adding */
+	if (mac_type == HCLGE_MAC_ADDR_UC) {
+		hclge_unsync_vport_mac_list(vport, &tmp_del_list,
+					    hclge_rm_uc_addr_common);
+		hclge_sync_vport_mac_list(vport, &tmp_add_list,
+					  hclge_add_uc_addr_common);
+	} else {
+		hclge_unsync_vport_mac_list(vport, &tmp_del_list,
+					    hclge_rm_mc_addr_common);
+		hclge_sync_vport_mac_list(vport, &tmp_add_list,
+					  hclge_add_mc_addr_common);
+	}
+
+	/* if some mac addresses were added/deleted fail, move back to the
+	 * mac_list, and retry at next time.
+	 */
+	spin_lock_bh(&vport->mac_list_lock);
+
+	hclge_sync_from_del_list(&tmp_del_list, list);
+	all_added = hclge_sync_from_add_list(&tmp_add_list, list);
+
+	spin_unlock_bh(&vport->mac_list_lock);
+
+	hclge_update_overflow_flags(vport, mac_type, all_added);
+}
+
+static bool hclge_need_sync_mac_table(struct hclge_vport *vport)
+{
+	struct hclge_dev *hdev = vport->back;
+
+	if (test_bit(vport->vport_id, hdev->vport_config_block))
+		return false;
+
+	if (test_and_clear_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE, &vport->state))
+		return true;
+
+	return false;
+}
+
+static void hclge_sync_mac_table(struct hclge_dev *hdev)
+{
+	int i;
+
+	for (i = 0; i < hdev->num_alloc_vport; i++) {
+		struct hclge_vport *vport = &hdev->vport[i];
+
+		if (!hclge_need_sync_mac_table(vport))
+			continue;
+
+		hclge_sync_vport_mac_table(vport, HCLGE_MAC_ADDR_UC);
+		hclge_sync_vport_mac_table(vport, HCLGE_MAC_ADDR_MC);
+	}
 }
 
 void hclge_rm_vport_all_mac_table(struct hclge_vport *vport, bool is_del_list,
 				  enum HCLGE_MAC_ADDR_TYPE mac_type)
 {
-	struct hclge_vport_mac_addr_cfg *mac_cfg, *tmp;
-	struct list_head *list;
+	int (*unsync)(struct hclge_vport *vport, const unsigned char *addr);
+	struct hclge_mac_node *mac_cfg, *tmp;
+	struct hclge_dev *hdev = vport->back;
+	struct list_head tmp_del_list, *list;
+	int ret;
 
-	list = (mac_type == HCLGE_MAC_ADDR_UC) ?
-	       &vport->uc_mac_list : &vport->mc_mac_list;
+	if (mac_type == HCLGE_MAC_ADDR_UC) {
+		list = &vport->uc_mac_list;
+		unsync = hclge_rm_uc_addr_common;
+	} else {
+		list = &vport->mc_mac_list;
+		unsync = hclge_rm_mc_addr_common;
+	}
 
-	list_for_each_entry_safe(mac_cfg, tmp, list, node) {
-		if (mac_type == HCLGE_MAC_ADDR_UC && mac_cfg->hd_tbl_status)
-			hclge_rm_uc_addr_common(vport, mac_cfg->mac_addr);
+	INIT_LIST_HEAD(&tmp_del_list);
 
-		if (mac_type == HCLGE_MAC_ADDR_MC && mac_cfg->hd_tbl_status)
-			hclge_rm_mc_addr_common(vport, mac_cfg->mac_addr);
+	if (!is_del_list)
+		set_bit(vport->vport_id, hdev->vport_config_block);
 
-		mac_cfg->hd_tbl_status = false;
-		if (is_del_list) {
+	spin_lock_bh(&vport->mac_list_lock);
+
+	list_for_each_entry_safe(mac_cfg, tmp, list, node) {
+		switch (mac_cfg->state) {
+		case HCLGE_MAC_TO_DEL:
+		case HCLGE_MAC_ACTIVE:
 			list_del(&mac_cfg->node);
-			kfree(mac_cfg);
+			list_add_tail(&mac_cfg->node, &tmp_del_list);
+			break;
+		case HCLGE_MAC_TO_ADD:
+			if (is_del_list) {
+				list_del(&mac_cfg->node);
+				kfree(mac_cfg);
+			}
+			break;
 		}
 	}
+
+	spin_unlock_bh(&vport->mac_list_lock);
+
+	list_for_each_entry_safe(mac_cfg, tmp, &tmp_del_list, node) {
+		ret = unsync(vport, mac_cfg->mac_addr);
+		if (!ret || ret == -ENOENT) {
+			/* clear all mac addr from hardware, but remain these
+			 * mac addr in the mac list, and restore them after
+			 * vf reset finished.
+			 */
+			if (!is_del_list &&
+			    mac_cfg->state == HCLGE_MAC_ACTIVE) {
+				mac_cfg->state = HCLGE_MAC_TO_ADD;
+			} else {
+				list_del(&mac_cfg->node);
+				kfree(mac_cfg);
+			}
+		} else if (is_del_list) {
+			mac_cfg->state = HCLGE_MAC_TO_DEL;
+		}
+	}
+
+	spin_lock_bh(&vport->mac_list_lock);
+
+	hclge_sync_from_del_list(&tmp_del_list, list);
+
+	spin_unlock_bh(&vport->mac_list_lock);
+}
+
+/* remove all mac address when uninitailize */
+static void hclge_uninit_vport_mac_list(struct hclge_vport *vport,
+					enum HCLGE_MAC_ADDR_TYPE mac_type)
+{
+	struct hclge_mac_node *mac_node, *tmp;
+	struct hclge_dev *hdev = vport->back;
+	struct list_head tmp_del_list, *list;
+
+	INIT_LIST_HEAD(&tmp_del_list);
+
+	list = (mac_type == HCLGE_MAC_ADDR_UC) ?
+		&vport->uc_mac_list : &vport->mc_mac_list;
+
+	spin_lock_bh(&vport->mac_list_lock);
+
+	list_for_each_entry_safe(mac_node, tmp, list, node) {
+		switch (mac_node->state) {
+		case HCLGE_MAC_TO_DEL:
+		case HCLGE_MAC_ACTIVE:
+			list_del(&mac_node->node);
+			list_add_tail(&mac_node->node, &tmp_del_list);
+			break;
+		case HCLGE_MAC_TO_ADD:
+			list_del(&mac_node->node);
+			kfree(mac_node);
+			break;
+		}
+	}
+
+	spin_unlock_bh(&vport->mac_list_lock);
+
+	if (mac_type == HCLGE_MAC_ADDR_UC)
+		hclge_unsync_vport_mac_list(vport, &tmp_del_list,
+					    hclge_rm_uc_addr_common);
+	else
+		hclge_unsync_vport_mac_list(vport, &tmp_del_list,
+					    hclge_rm_mc_addr_common);
+
+	if (!list_empty(&tmp_del_list))
+		dev_warn(&hdev->pdev->dev,
+			 "uninit %s mac list for vport %u not completely.\n",
+			 mac_type == HCLGE_MAC_ADDR_UC ? "uc" : "mc",
+			 vport->vport_id);
+
+	list_for_each_entry_safe(mac_node, tmp, &tmp_del_list, node) {
+		list_del(&mac_node->node);
+		kfree(mac_node);
+	}
 }
 
-void hclge_uninit_vport_mac_table(struct hclge_dev *hdev)
+static void hclge_uninit_mac_table(struct hclge_dev *hdev)
 {
-	struct hclge_vport_mac_addr_cfg *mac, *tmp;
 	struct hclge_vport *vport;
 	int i;
 
 	for (i = 0; i < hdev->num_alloc_vport; i++) {
 		vport = &hdev->vport[i];
-		list_for_each_entry_safe(mac, tmp, &vport->uc_mac_list, node) {
-			list_del(&mac->node);
-			kfree(mac);
-		}
-
-		list_for_each_entry_safe(mac, tmp, &vport->mc_mac_list, node) {
-			list_del(&mac->node);
-			kfree(mac);
-		}
+		hclge_uninit_vport_mac_list(vport, HCLGE_MAC_ADDR_UC);
+		hclge_uninit_vport_mac_list(vport, HCLGE_MAC_ADDR_MC);
 	}
 }
 
@@ -7683,12 +8112,57 @@ static void hclge_get_mac_addr(struct hnae3_handle *handle, u8 *p)
 	ether_addr_copy(p, hdev->hw.mac.mac_addr);
 }
 
+int hclge_update_mac_node_for_dev_addr(struct hclge_vport *vport,
+				       const u8 *old_addr, const u8 *new_addr)
+{
+	struct list_head *list = &vport->uc_mac_list;
+	struct hclge_mac_node *old_node, *new_node;
+
+	new_node = hclge_find_mac_node(list, new_addr);
+	if (!new_node) {
+		new_node = kzalloc(sizeof(*new_node), GFP_ATOMIC);
+		if (!new_node)
+			return -ENOMEM;
+
+		new_node->state = HCLGE_MAC_TO_ADD;
+		ether_addr_copy(new_node->mac_addr, new_addr);
+		list_add(&new_node->node, list);
+	} else {
+		if (new_node->state == HCLGE_MAC_TO_DEL)
+			new_node->state = HCLGE_MAC_ACTIVE;
+
+		/* make sure the new addr is in the list head, avoid dev
+		 * addr may be not re-added into mac table for the umv space
+		 * limitation after global/imp reset which will clear mac
+		 * table by hardware.
+		 */
+		list_move(&new_node->node, list);
+	}
+
+	if (old_addr && !ether_addr_equal(old_addr, new_addr)) {
+		old_node = hclge_find_mac_node(list, old_addr);
+		if (old_node) {
+			if (old_node->state == HCLGE_MAC_TO_ADD) {
+				list_del(&old_node->node);
+				kfree(old_node);
+			} else {
+				old_node->state = HCLGE_MAC_TO_DEL;
+			}
+		}
+	}
+
+	set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE, &vport->state);
+
+	return 0;
+}
+
 static int hclge_set_mac_addr(struct hnae3_handle *handle, void *p,
 			      bool is_first)
 {
 	const unsigned char *new_addr = (const unsigned char *)p;
 	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_dev *hdev = vport->back;
+	unsigned char *old_addr = NULL;
 	int ret;
 
 	/* mac addr check */
@@ -7696,39 +8170,42 @@ static int hclge_set_mac_addr(struct hnae3_handle *handle, void *p,
 	    is_broadcast_ether_addr(new_addr) ||
 	    is_multicast_ether_addr(new_addr)) {
 		dev_err(&hdev->pdev->dev,
-			"Change uc mac err! invalid mac:%pM.\n",
+			"change uc mac err! invalid mac: %pM.\n",
 			 new_addr);
 		return -EINVAL;
 	}
 
-	if ((!is_first || is_kdump_kernel()) &&
-	    hclge_rm_uc_addr(handle, hdev->hw.mac.mac_addr))
-		dev_warn(&hdev->pdev->dev,
-			 "remove old uc mac address fail.\n");
-
-	ret = hclge_add_uc_addr(handle, new_addr);
+	ret = hclge_pause_addr_cfg(hdev, new_addr);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
-			"add uc mac address fail, ret =%d.\n",
+			"failed to configure mac pause address, ret = %d\n",
 			ret);
-
-		if (!is_first &&
-		    hclge_add_uc_addr(handle, hdev->hw.mac.mac_addr))
-			dev_err(&hdev->pdev->dev,
-				"restore uc mac address fail.\n");
-
-		return -EIO;
+		return ret;
 	}
 
-	ret = hclge_pause_addr_cfg(hdev, new_addr);
+	if (!is_first)
+		old_addr = hdev->hw.mac.mac_addr;
+
+	spin_lock_bh(&vport->mac_list_lock);
+	ret = hclge_update_mac_node_for_dev_addr(vport, old_addr, new_addr);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
-			"configure mac pause address fail, ret =%d.\n",
-			ret);
-		return -EIO;
-	}
+			"failed to change the mac addr:%pM, ret = %d\n",
+			new_addr, ret);
+		spin_unlock_bh(&vport->mac_list_lock);
+
+		if (!is_first)
+			hclge_pause_addr_cfg(hdev, old_addr);
 
+		return ret;
+	}
+	/* we must update dev addr with spin lock protect, preventing dev addr
+	 * being removed by set_rx_mode path.
+	 */
 	ether_addr_copy(hdev->hw.mac.mac_addr, new_addr);
+	spin_unlock_bh(&vport->mac_list_lock);
+
+	hclge_task_schedule(hdev, 0);
 
 	return 0;
 }
@@ -8308,42 +8785,80 @@ void hclge_uninit_vport_vlan_table(struct hclge_dev *hdev)
 	}
 }
 
-static void hclge_restore_vlan_table(struct hnae3_handle *handle)
+void hclge_restore_vport_vlan_table(struct hclge_vport *vport)
 {
-	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_vport_vlan_cfg *vlan, *tmp;
 	struct hclge_dev *hdev = vport->back;
 	u16 vlan_proto;
-	u16 state, vlan_id;
-	int i;
+	u16 vlan_id;
+	u16 state;
+	int ret;
 
-	for (i = 0; i < hdev->num_alloc_vport; i++) {
-		vport = &hdev->vport[i];
-		vlan_proto = vport->port_base_vlan_cfg.vlan_info.vlan_proto;
-		vlan_id = vport->port_base_vlan_cfg.vlan_info.vlan_tag;
-		state = vport->port_base_vlan_cfg.state;
+	vlan_proto = vport->port_base_vlan_cfg.vlan_info.vlan_proto;
+	vlan_id = vport->port_base_vlan_cfg.vlan_info.vlan_tag;
+	state = vport->port_base_vlan_cfg.state;
 
-		if (state != HNAE3_PORT_BASE_VLAN_DISABLE) {
-			hclge_set_vlan_filter_hw(hdev, htons(vlan_proto),
-						 vport->vport_id, vlan_id,
-						 false);
-			continue;
-		}
+	if (state != HNAE3_PORT_BASE_VLAN_DISABLE) {
+		clear_bit(vport->vport_id, hdev->vlan_table[vlan_id]);
+		hclge_set_vlan_filter_hw(hdev, htons(vlan_proto),
+					 vport->vport_id, vlan_id,
+					 false);
+		return;
+	}
 
-		list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
-			int ret;
+	list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
+		ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q),
+					       vport->vport_id,
+					       vlan->vlan_id, false);
+		if (ret)
+			break;
+		vlan->hd_tbl_status = true;
+	}
+}
 
-			if (!vlan->hd_tbl_status)
-				continue;
-			ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q),
-						       vport->vport_id,
-						       vlan->vlan_id, false);
-			if (ret)
-				break;
+/* For global reset and imp reset, hardware will clear the mac table,
+ * so we change the mac address state from ACTIVE to TO_ADD, then they
+ * can be restored in the service task after reset complete. Furtherly,
+ * the mac addresses with state TO_DEL or DEL_FAIL are unnecessary to
+ * be restored after reset, so just remove these mac nodes from mac_list.
+ */
+static void hclge_mac_node_convert_for_reset(struct list_head *list)
+{
+	struct hclge_mac_node *mac_node, *tmp;
+
+	list_for_each_entry_safe(mac_node, tmp, list, node) {
+		if (mac_node->state == HCLGE_MAC_ACTIVE) {
+			mac_node->state = HCLGE_MAC_TO_ADD;
+		} else if (mac_node->state == HCLGE_MAC_TO_DEL) {
+			list_del(&mac_node->node);
+			kfree(mac_node);
 		}
 	}
 }
 
+void hclge_restore_mac_table_common(struct hclge_vport *vport)
+{
+	spin_lock_bh(&vport->mac_list_lock);
+
+	hclge_mac_node_convert_for_reset(&vport->uc_mac_list);
+	hclge_mac_node_convert_for_reset(&vport->mc_mac_list);
+	set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE, &vport->state);
+
+	spin_unlock_bh(&vport->mac_list_lock);
+}
+
+static void hclge_restore_hw_table(struct hclge_dev *hdev)
+{
+	struct hclge_vport *vport = &hdev->vport[0];
+	struct hnae3_handle *handle = &vport->nic;
+
+	hclge_restore_mac_table_common(vport);
+	hclge_restore_vport_vlan_table(vport);
+	set_bit(HCLGE_STATE_PROMISC_CHANGED, &hdev->state);
+
+	hclge_restore_fd_entries(handle);
+}
+
 int hclge_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
@@ -9658,7 +10173,7 @@ static int hclge_set_vf_spoofchk(struct hnae3_handle *handle, int vf,
 		dev_warn(&hdev->pdev->dev,
 			 "vf %d vlan table is full, enable spoof check may cause its packet send fail\n",
 			 vf);
-	else if (enable && hclge_is_umv_space_full(vport))
+	else if (enable && hclge_is_umv_space_full(vport, true))
 		dev_warn(&hdev->pdev->dev,
 			 "vf %d mac table is full, enable spoof check may cause its packet send fail\n",
 			 vf);
@@ -9835,8 +10350,16 @@ static int hclge_reset_ae_dev(struct hnae3_ae_dev *ae_dev)
 	set_bit(HCLGE_STATE_DOWN, &hdev->state);
 
 	hclge_stats_clear(hdev);
-	memset(hdev->vlan_table, 0, sizeof(hdev->vlan_table));
-	memset(hdev->vf_vlan_full, 0, sizeof(hdev->vf_vlan_full));
+	/* NOTE: pf reset needn't to clear or restore pf and vf table entry.
+	 * so here should not clean table in memory.
+	 */
+	if (hdev->reset_type == HNAE3_IMP_RESET ||
+	    hdev->reset_type == HNAE3_GLOBAL_RESET) {
+		memset(hdev->vlan_table, 0, sizeof(hdev->vlan_table));
+		memset(hdev->vf_vlan_full, 0, sizeof(hdev->vf_vlan_full));
+		bitmap_set(hdev->vport_config_block, 0, hdev->num_alloc_vport);
+		hclge_reset_umv_space(hdev);
+	}
 
 	ret = hclge_cmd_init(hdev);
 	if (ret) {
@@ -9850,8 +10373,6 @@ static int hclge_reset_ae_dev(struct hnae3_ae_dev *ae_dev)
 		return ret;
 	}
 
-	hclge_reset_umv_space(hdev);
-
 	ret = hclge_mac_init(hdev);
 	if (ret) {
 		dev_err(&pdev->dev, "Mac init error, ret = %d\n", ret);
@@ -9947,12 +10468,11 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
 	hclge_clear_vf_vlan(hdev);
 	hclge_misc_affinity_teardown(hdev);
 	hclge_state_uninit(hdev);
+	hclge_uninit_mac_table(hdev);
 
 	if (mac->phydev)
 		mdiobus_unregister(mac->mdio_bus);
 
-	hclge_uninit_umv_space(hdev);
-
 	/* Disable MISC vector(vector0) */
 	hclge_enable_vector(&hdev->misc_vector, false);
 	synchronize_irq(hdev->misc_vector.vector_irq);
@@ -9966,7 +10486,6 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
 	hclge_misc_irq_uninit(hdev);
 	hclge_pci_uninit(hdev);
 	mutex_destroy(&hdev->vport_lock);
-	hclge_uninit_vport_mac_table(hdev);
 	hclge_uninit_vport_vlan_table(hdev);
 	ae_dev->priv = NULL;
 }
@@ -10576,6 +11095,131 @@ static int hclge_gro_en(struct hnae3_handle *handle, bool enable)
 	return hclge_config_gro(hdev, enable);
 }
 
+static void hclge_sync_promisc_mode(struct hclge_dev *hdev)
+{
+	struct hclge_vport *vport = &hdev->vport[0];
+	struct hnae3_handle *handle = &vport->nic;
+	u8 tmp_flags = 0;
+	int ret;
+
+	if (vport->last_promisc_flags != vport->overflow_promisc_flags) {
+		set_bit(HCLGE_STATE_PROMISC_CHANGED, &hdev->state);
+		vport->last_promisc_flags = vport->overflow_promisc_flags;
+	}
+
+	if (test_bit(HCLGE_STATE_PROMISC_CHANGED, &hdev->state)) {
+		tmp_flags = handle->netdev_flags | vport->last_promisc_flags;
+		ret = hclge_set_promisc_mode(handle, tmp_flags & HNAE3_UPE,
+					     tmp_flags & HNAE3_MPE);
+		if (!ret) {
+			clear_bit(HCLGE_STATE_PROMISC_CHANGED, &hdev->state);
+			hclge_enable_vlan_filter(handle,
+						 tmp_flags & HNAE3_VLAN_FLTR);
+		}
+	}
+}
+
+static bool hclge_module_existed(struct hclge_dev *hdev)
+{
+	struct hclge_desc desc;
+	u32 existed;
+	int ret;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_GET_SFP_EXIST, true);
+	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"failed to get SFP exist state, ret = %d\n", ret);
+		return false;
+	}
+
+	existed = le32_to_cpu(desc.data[0]);
+
+	return existed != 0;
+}
+
+/* need 6 bds(total 140 bytes) in one reading
+ * return the number of bytes actually read, 0 means read failed.
+ */
+static u16 hclge_get_sfp_eeprom_info(struct hclge_dev *hdev, u32 offset,
+				     u32 len, u8 *data)
+{
+	struct hclge_desc desc[HCLGE_SFP_INFO_CMD_NUM];
+	struct hclge_sfp_info_bd0_cmd *sfp_info_bd0;
+	u16 read_len;
+	u16 copy_len;
+	int ret;
+	int i;
+
+	/* setup all 6 bds to read module eeprom info. */
+	for (i = 0; i < HCLGE_SFP_INFO_CMD_NUM; i++) {
+		hclge_cmd_setup_basic_desc(&desc[i], HCLGE_OPC_GET_SFP_EEPROM,
+					   true);
+
+		/* bd0~bd4 need next flag */
+		if (i < HCLGE_SFP_INFO_CMD_NUM - 1)
+			desc[i].flag |= cpu_to_le16(HCLGE_CMD_FLAG_NEXT);
+	}
+
+	/* setup bd0, this bd contains offset and read length. */
+	sfp_info_bd0 = (struct hclge_sfp_info_bd0_cmd *)desc[0].data;
+	sfp_info_bd0->offset = cpu_to_le16((u16)offset);
+	read_len = min_t(u16, len, HCLGE_SFP_INFO_MAX_LEN);
+	sfp_info_bd0->read_len = cpu_to_le16(read_len);
+
+	ret = hclge_cmd_send(&hdev->hw, desc, i);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"failed to get SFP eeprom info, ret = %d\n", ret);
+		return 0;
+	}
+
+	/* copy sfp info from bd0 to out buffer. */
+	copy_len = min_t(u16, len, HCLGE_SFP_INFO_BD0_LEN);
+	memcpy(data, sfp_info_bd0->data, copy_len);
+	read_len = copy_len;
+
+	/* copy sfp info from bd1~bd5 to out buffer if needed. */
+	for (i = 1; i < HCLGE_SFP_INFO_CMD_NUM; i++) {
+		if (read_len >= len)
+			return read_len;
+
+		copy_len = min_t(u16, len - read_len, HCLGE_SFP_INFO_BDX_LEN);
+		memcpy(data + read_len, desc[i].data, copy_len);
+		read_len += copy_len;
+	}
+
+	return read_len;
+}
+
+static int hclge_get_module_eeprom(struct hnae3_handle *handle, u32 offset,
+				   u32 len, u8 *data)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+	u32 read_len = 0;
+	u16 data_len;
+
+	if (hdev->hw.mac.media_type != HNAE3_MEDIA_TYPE_FIBER)
+		return -EOPNOTSUPP;
+
+	if (!hclge_module_existed(hdev))
+		return -ENXIO;
+
+	while (read_len < len) {
+		data_len = hclge_get_sfp_eeprom_info(hdev,
+						     offset + read_len,
+						     len - read_len,
+						     data + read_len);
+		if (!data_len)
+			return -EIO;
+
+		read_len += data_len;
+	}
+
+	return 0;
+}
+
 static const struct hnae3_ae_ops hclge_ops = {
 	.init_ae_dev = hclge_init_ae_dev,
 	.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -10588,6 +11232,7 @@ static const struct hnae3_ae_ops hclge_ops = {
 	.get_vector = hclge_get_vector,
 	.put_vector = hclge_put_vector,
 	.set_promisc_mode = hclge_set_promisc_mode,
+	.request_update_promisc_mode = hclge_request_update_promisc_mode,
 	.set_loopback = hclge_set_loopback,
 	.start = hclge_ae_start,
 	.stop = hclge_ae_stop,
@@ -10649,7 +11294,6 @@ static const struct hnae3_ae_ops hclge_ops = {
 	.get_fd_rule_cnt = hclge_get_fd_rule_cnt,
 	.get_fd_rule_info = hclge_get_fd_rule_info,
 	.get_fd_all_rules = hclge_get_all_rules,
-	.restore_fd_rules = hclge_restore_fd_entries,
 	.enable_fd = hclge_enable_fd,
 	.add_arfs_entry = hclge_add_fd_entry_by_arfs,
 	.dbg_run_cmd = hclge_dbg_run_cmd,
@@ -10662,13 +11306,13 @@ static const struct hnae3_ae_ops hclge_ops = {
 	.set_timer_task = hclge_set_timer_task,
 	.mac_connect_phy = hclge_mac_connect_phy,
 	.mac_disconnect_phy = hclge_mac_disconnect_phy,
-	.restore_vlan_table = hclge_restore_vlan_table,
 	.get_vf_config = hclge_get_vf_config,
 	.set_vf_link_state = hclge_set_vf_link_state,
 	.set_vf_spoofchk = hclge_set_vf_spoofchk,
 	.set_vf_trust = hclge_set_vf_trust,
 	.set_vf_rate = hclge_set_vf_rate,
 	.set_vf_mac = hclge_set_vf_mac,
+	.get_module_eeprom = hclge_get_module_eeprom,
 };
 
 static struct hnae3_ae_algo ae_algo = {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 71df23d5f1b4..913c4f677404 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -217,6 +217,7 @@ enum HCLGE_DEV_STATE {
 	HCLGE_STATE_STATISTICS_UPDATING,
 	HCLGE_STATE_CMD_DISABLE,
 	HCLGE_STATE_LINK_UPDATING,
+	HCLGE_STATE_PROMISC_CHANGED,
 	HCLGE_STATE_RST_FAIL,
 	HCLGE_STATE_MAX
 };
@@ -580,7 +581,6 @@ struct hclge_fd_key_cfg {
 struct hclge_fd_cfg {
 	u8 fd_mode;
 	u16 max_key_length; /* use bit as unit */
-	u32 proto_support;
 	u32 rule_num[MAX_STAGE_NUM]; /* rule entry number */
 	u16 cnt_num[MAX_STAGE_NUM]; /* rule hit counter number */
 	struct hclge_fd_key_cfg key_cfg[MAX_STAGE_NUM];
@@ -631,9 +631,15 @@ struct hclge_fd_ad_data {
 	u16 rule_id;
 };
 
-struct hclge_vport_mac_addr_cfg {
+enum HCLGE_MAC_NODE_STATE {
+	HCLGE_MAC_TO_ADD,
+	HCLGE_MAC_TO_DEL,
+	HCLGE_MAC_ACTIVE
+};
+
+struct hclge_mac_node {
 	struct list_head node;
-	int hd_tbl_status;
+	enum HCLGE_MAC_NODE_STATE state;
 	u8 mac_addr[ETH_ALEN];
 };
 
@@ -806,6 +812,8 @@ struct hclge_dev {
 	unsigned long vlan_table[VLAN_N_VID][BITS_TO_LONGS(HCLGE_VPORT_NUM)];
 	unsigned long vf_vlan_full[BITS_TO_LONGS(HCLGE_VPORT_NUM)];
 
+	unsigned long vport_config_block[BITS_TO_LONGS(HCLGE_VPORT_NUM)];
+
 	struct hclge_fd_cfg fd_cfg;
 	struct hlist_head fd_rule_list;
 	spinlock_t fd_rule_lock; /* protect fd_rule_list and fd_bmap */
@@ -823,7 +831,6 @@ struct hclge_dev {
 	u16 priv_umv_size;
 	/* unicast mac vlan space shared by PF and its VFs */
 	u16 share_umv_size;
-	struct mutex umv_mutex; /* protect share_umv_size */
 
 	DECLARE_KFIFO(mac_tnl_log, struct hclge_mac_tnl_stats,
 		      HCLGE_MAC_TNL_LOG_SIZE);
@@ -867,6 +874,7 @@ struct hclge_rss_tuple_cfg {
 
 enum HCLGE_VPORT_STATE {
 	HCLGE_VPORT_STATE_ALIVE,
+	HCLGE_VPORT_STATE_MAC_TBL_CHANGE,
 	HCLGE_VPORT_STATE_MAX
 };
 
@@ -923,6 +931,10 @@ struct hclge_vport {
 	u32 mps; /* Max packet size */
 	struct hclge_vf_info vf_info;
 
+	u8 overflow_promisc_flags;
+	u8 last_promisc_flags;
+
+	spinlock_t mac_list_lock; /* protect mac address need to add/detele */
 	struct list_head uc_mac_list;   /* Store VF unicast table */
 	struct list_head mc_mac_list;   /* Store VF multicast table */
 	struct list_head vlan_list;     /* Store VF vlan table */
@@ -978,16 +990,18 @@ int hclge_dbg_run_cmd(struct hnae3_handle *handle, const char *cmd_buf);
 u16 hclge_covert_handle_qid_global(struct hnae3_handle *handle, u16 queue_id);
 int hclge_notify_client(struct hclge_dev *hdev,
 			enum hnae3_reset_notify_type type);
-void hclge_add_vport_mac_table(struct hclge_vport *vport, const u8 *mac_addr,
-			       enum HCLGE_MAC_ADDR_TYPE mac_type);
-void hclge_rm_vport_mac_table(struct hclge_vport *vport, const u8 *mac_addr,
-			      bool is_write_tbl,
-			      enum HCLGE_MAC_ADDR_TYPE mac_type);
+int hclge_update_mac_list(struct hclge_vport *vport,
+			  enum HCLGE_MAC_NODE_STATE state,
+			  enum HCLGE_MAC_ADDR_TYPE mac_type,
+			  const unsigned char *addr);
+int hclge_update_mac_node_for_dev_addr(struct hclge_vport *vport,
+				       const u8 *old_addr, const u8 *new_addr);
 void hclge_rm_vport_all_mac_table(struct hclge_vport *vport, bool is_del_list,
 				  enum HCLGE_MAC_ADDR_TYPE mac_type);
-void hclge_uninit_vport_mac_table(struct hclge_dev *hdev);
 void hclge_rm_vport_all_vlan_table(struct hclge_vport *vport, bool is_del_list);
 void hclge_uninit_vport_vlan_table(struct hclge_dev *hdev);
+void hclge_restore_mac_table_common(struct hclge_vport *vport);
+void hclge_restore_vport_vlan_table(struct hclge_vport *vport);
 int hclge_update_port_base_vlan_cfg(struct hclge_vport *vport, u16 state,
 				    struct hclge_vlan_info *vlan_info);
 int hclge_push_vf_port_base_vlan_info(struct hclge_vport *vport, u8 vfid,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 7f24fcb4f96a..ac70fafd15d5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -5,6 +5,9 @@
 #include "hclge_mbx.h"
 #include "hnae3.h"
 
+#define CREATE_TRACE_POINTS
+#include "hclge_trace.h"
+
 static u16 hclge_errno_to_resp(int errno)
 {
 	return abs(errno);
@@ -90,6 +93,8 @@ static int hclge_send_mbx_msg(struct hclge_vport *vport, u8 *msg, u16 msg_len,
 
 	memcpy(&resp_pf_to_vf->msg.vf_mbx_msg_code, msg, msg_len);
 
+	trace_hclge_pf_mbx_send(hdev, resp_pf_to_vf);
+
 	status = hclge_cmd_send(&hdev->hw, &desc, 1);
 	if (status)
 		dev_err(&hdev->pdev->dev,
@@ -270,26 +275,17 @@ static int hclge_set_vf_uc_mac_addr(struct hclge_vport *vport,
 		if (!is_valid_ether_addr(mac_addr))
 			return -EINVAL;
 
-		hclge_rm_uc_addr_common(vport, old_addr);
-		status = hclge_add_uc_addr_common(vport, mac_addr);
-		if (status) {
-			hclge_add_uc_addr_common(vport, old_addr);
-		} else {
-			hclge_rm_vport_mac_table(vport, mac_addr,
-						 false, HCLGE_MAC_ADDR_UC);
-			hclge_add_vport_mac_table(vport, mac_addr,
-						  HCLGE_MAC_ADDR_UC);
-		}
+		spin_lock_bh(&vport->mac_list_lock);
+		status = hclge_update_mac_node_for_dev_addr(vport, old_addr,
+							    mac_addr);
+		spin_unlock_bh(&vport->mac_list_lock);
+		hclge_task_schedule(hdev, 0);
 	} else if (mbx_req->msg.subcode == HCLGE_MBX_MAC_VLAN_UC_ADD) {
-		status = hclge_add_uc_addr_common(vport, mac_addr);
-		if (!status)
-			hclge_add_vport_mac_table(vport, mac_addr,
-						  HCLGE_MAC_ADDR_UC);
+		status = hclge_update_mac_list(vport, HCLGE_MAC_TO_ADD,
+					       HCLGE_MAC_ADDR_UC, mac_addr);
 	} else if (mbx_req->msg.subcode == HCLGE_MBX_MAC_VLAN_UC_REMOVE) {
-		status = hclge_rm_uc_addr_common(vport, mac_addr);
-		if (!status)
-			hclge_rm_vport_mac_table(vport, mac_addr,
-						 false, HCLGE_MAC_ADDR_UC);
+		status = hclge_update_mac_list(vport, HCLGE_MAC_TO_DEL,
+					       HCLGE_MAC_ADDR_UC, mac_addr);
 	} else {
 		dev_err(&hdev->pdev->dev,
 			"failed to set unicast mac addr, unknown subcode %u\n",
@@ -305,18 +301,13 @@ static int hclge_set_vf_mc_mac_addr(struct hclge_vport *vport,
 {
 	const u8 *mac_addr = (const u8 *)(mbx_req->msg.data);
 	struct hclge_dev *hdev = vport->back;
-	int status;
 
 	if (mbx_req->msg.subcode == HCLGE_MBX_MAC_VLAN_MC_ADD) {
-		status = hclge_add_mc_addr_common(vport, mac_addr);
-		if (!status)
-			hclge_add_vport_mac_table(vport, mac_addr,
-						  HCLGE_MAC_ADDR_MC);
+		hclge_update_mac_list(vport, HCLGE_MAC_TO_ADD,
+				      HCLGE_MAC_ADDR_MC, mac_addr);
 	} else if (mbx_req->msg.subcode == HCLGE_MBX_MAC_VLAN_MC_REMOVE) {
-		status = hclge_rm_mc_addr_common(vport, mac_addr);
-		if (!status)
-			hclge_rm_vport_mac_table(vport, mac_addr,
-						 false, HCLGE_MAC_ADDR_MC);
+		hclge_update_mac_list(vport, HCLGE_MAC_TO_DEL,
+				      HCLGE_MAC_ADDR_MC, mac_addr);
 	} else {
 		dev_err(&hdev->pdev->dev,
 			"failed to set mcast mac addr, unknown subcode %u\n",
@@ -324,7 +315,7 @@ static int hclge_set_vf_mc_mac_addr(struct hclge_vport *vport,
 		return -EIO;
 	}
 
-	return status;
+	return 0;
 }
 
 int hclge_push_vf_port_base_vlan_info(struct hclge_vport *vport, u8 vfid,
@@ -638,6 +629,23 @@ static void hclge_handle_ncsi_error(struct hclge_dev *hdev)
 	ae_dev->ops->reset_event(hdev->pdev, NULL);
 }
 
+static void hclge_handle_vf_tbl(struct hclge_vport *vport,
+				struct hclge_mbx_vf_to_pf_cmd *mbx_req)
+{
+	struct hclge_dev *hdev = vport->back;
+	struct hclge_vf_vlan_cfg *msg_cmd;
+
+	msg_cmd = (struct hclge_vf_vlan_cfg *)&mbx_req->msg;
+	if (msg_cmd->subcode == HCLGE_MBX_VPORT_LIST_CLEAR) {
+		hclge_rm_vport_all_mac_table(vport, true, HCLGE_MAC_ADDR_UC);
+		hclge_rm_vport_all_mac_table(vport, true, HCLGE_MAC_ADDR_MC);
+		hclge_rm_vport_all_vlan_table(vport, true);
+	} else {
+		dev_warn(&hdev->pdev->dev, "Invalid cmd(%u)\n",
+			 msg_cmd->subcode);
+	}
+}
+
 void hclge_mbx_handler(struct hclge_dev *hdev)
 {
 	struct hclge_cmq_ring *crq = &hdev->hw.cmq.crq;
@@ -645,6 +653,7 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 	struct hclge_mbx_vf_to_pf_cmd *req;
 	struct hclge_vport *vport;
 	struct hclge_desc *desc;
+	bool is_del = false;
 	unsigned int flag;
 	int ret = 0;
 
@@ -674,6 +683,8 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 
 		vport = &hdev->vport[req->mbx_src_vfid];
 
+		trace_hclge_pf_mbx_get(hdev, req);
+
 		switch (req->msg.code) {
 		case HCLGE_MBX_MAP_RING_TO_VECTOR:
 			ret = hclge_map_unmap_ring_to_vf_vector(vport, true,
@@ -760,11 +771,12 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 			break;
 		case HCLGE_MBX_GET_VF_FLR_STATUS:
 		case HCLGE_MBX_VF_UNINIT:
-			hclge_rm_vport_all_mac_table(vport, true,
+			is_del = req->msg.code == HCLGE_MBX_VF_UNINIT;
+			hclge_rm_vport_all_mac_table(vport, is_del,
 						     HCLGE_MAC_ADDR_UC);
-			hclge_rm_vport_all_mac_table(vport, true,
+			hclge_rm_vport_all_mac_table(vport, is_del,
 						     HCLGE_MAC_ADDR_MC);
-			hclge_rm_vport_all_vlan_table(vport, true);
+			hclge_rm_vport_all_vlan_table(vport, is_del);
 			break;
 		case HCLGE_MBX_GET_MEDIA_TYPE:
 			hclge_get_vf_media_type(vport, &resp_msg);
@@ -778,6 +790,9 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 		case HCLGE_MBX_NCSI_ERROR:
 			hclge_handle_ncsi_error(hdev);
 			break;
+		case HCLGE_MBX_HANDLE_VF_TBL:
+			hclge_handle_vf_tbl(vport, req);
+			break;
 		default:
 			dev_err(&hdev->pdev->dev,
 				"un-supported mailbox message, code = %u\n",
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_trace.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_trace.h
new file mode 100644
index 000000000000..5b0b71bd6120
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_trace.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (c) 2018-2020 Hisilicon Limited. */
+
+/* This must be outside ifdef _HCLGE_TRACE_H */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM hns3
+
+#if !defined(_HCLGE_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _HCLGE_TRACE_H_
+
+#include <linux/tracepoint.h>
+
+#define PF_GET_MBX_LEN	(sizeof(struct hclge_mbx_vf_to_pf_cmd) / sizeof(u32))
+#define PF_SEND_MBX_LEN	(sizeof(struct hclge_mbx_pf_to_vf_cmd) / sizeof(u32))
+
+TRACE_EVENT(hclge_pf_mbx_get,
+	TP_PROTO(
+		struct hclge_dev *hdev,
+		struct hclge_mbx_vf_to_pf_cmd *req),
+	TP_ARGS(hdev, req),
+
+	TP_STRUCT__entry(
+		__field(u8, vfid)
+		__field(u8, code)
+		__field(u8, subcode)
+		__string(pciname, pci_name(hdev->pdev))
+		__string(devname, &hdev->vport[0].nic.kinfo.netdev->name)
+		__array(u32, mbx_data, PF_GET_MBX_LEN)
+	),
+
+	TP_fast_assign(
+		__entry->vfid = req->mbx_src_vfid;
+		__entry->code = req->msg.code;
+		__entry->subcode = req->msg.subcode;
+		__assign_str(pciname, pci_name(hdev->pdev));
+		__assign_str(devname, &hdev->vport[0].nic.kinfo.netdev->name);
+		memcpy(__entry->mbx_data, req,
+		       sizeof(struct hclge_mbx_vf_to_pf_cmd));
+	),
+
+	TP_printk(
+		"%s %s vfid:%u code:%u subcode:%u data:%s",
+		__get_str(pciname), __get_str(devname), __entry->vfid,
+		__entry->code, __entry->subcode,
+		__print_array(__entry->mbx_data, PF_GET_MBX_LEN, sizeof(u32))
+	)
+);
+
+TRACE_EVENT(hclge_pf_mbx_send,
+	TP_PROTO(
+		struct hclge_dev *hdev,
+		struct hclge_mbx_pf_to_vf_cmd *req),
+	TP_ARGS(hdev, req),
+
+	TP_STRUCT__entry(
+		__field(u8, vfid)
+		__field(u16, code)
+		__string(pciname, pci_name(hdev->pdev))
+		__string(devname, &hdev->vport[0].nic.kinfo.netdev->name)
+		__array(u32, mbx_data, PF_SEND_MBX_LEN)
+	),
+
+	TP_fast_assign(
+		__entry->vfid = req->dest_vfid;
+		__entry->code = req->msg.code;
+		__assign_str(pciname, pci_name(hdev->pdev));
+		__assign_str(devname, &hdev->vport[0].nic.kinfo.netdev->name);
+		memcpy(__entry->mbx_data, req,
+		       sizeof(struct hclge_mbx_pf_to_vf_cmd));
+	),
+
+	TP_printk(
+		"%s %s vfid:%u code:%u data:%s",
+		__get_str(pciname), __get_str(devname), __entry->vfid,
+		__entry->code,
+		__print_array(__entry->mbx_data, PF_SEND_MBX_LEN, sizeof(u32))
+	)
+);
+
+#endif /* _HCLGE_TRACE_H_ */
+
+/* This must be outside ifdef _HCLGE_TRACE_H */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE hclge_trace
+#include <trace/define_trace.h>
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
index 53804d95ea90..2c26ea607a53 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
@@ -4,6 +4,7 @@
 #
 
 ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
+ccflags-y += -I $(srctree)/$(src)
 
 obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o
 hclgevf-objs = hclgevf_main.o hclgevf_cmd.o hclgevf_mbx.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index e02d427131ee..32341dcaa6c1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1164,6 +1164,27 @@ static int hclgevf_set_promisc_mode(struct hnae3_handle *handle, bool en_uc_pmc,
 					    en_bc_pmc);
 }
 
+static void hclgevf_request_update_promisc_mode(struct hnae3_handle *handle)
+{
+	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
+
+	set_bit(HCLGEVF_STATE_PROMISC_CHANGED, &hdev->state);
+}
+
+static void hclgevf_sync_promisc_mode(struct hclgevf_dev *hdev)
+{
+	struct hnae3_handle *handle = &hdev->nic;
+	bool en_uc_pmc = handle->netdev_flags & HNAE3_UPE;
+	bool en_mc_pmc = handle->netdev_flags & HNAE3_MPE;
+	int ret;
+
+	if (test_bit(HCLGEVF_STATE_PROMISC_CHANGED, &hdev->state)) {
+		ret = hclgevf_set_promisc_mode(handle, en_uc_pmc, en_mc_pmc);
+		if (!ret)
+			clear_bit(HCLGEVF_STATE_PROMISC_CHANGED, &hdev->state);
+	}
+}
+
 static int hclgevf_tqp_enable(struct hclgevf_dev *hdev, unsigned int tqp_id,
 			      int stream_id, bool enable)
 {
@@ -1245,10 +1266,12 @@ static int hclgevf_set_mac_addr(struct hnae3_handle *handle, void *p,
 	int status;
 
 	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_UNICAST, 0);
-	send_msg.subcode = is_first ? HCLGE_MBX_MAC_VLAN_UC_ADD :
-			HCLGE_MBX_MAC_VLAN_UC_MODIFY;
+	send_msg.subcode = HCLGE_MBX_MAC_VLAN_UC_MODIFY;
 	ether_addr_copy(send_msg.data, new_mac_addr);
-	ether_addr_copy(&send_msg.data[ETH_ALEN], old_mac_addr);
+	if (is_first && !hdev->has_pf_mac)
+		eth_zero_addr(&send_msg.data[ETH_ALEN]);
+	else
+		ether_addr_copy(&send_msg.data[ETH_ALEN], old_mac_addr);
 	status = hclgevf_send_mbx_msg(hdev, &send_msg, true, NULL, 0);
 	if (!status)
 		ether_addr_copy(hdev->hw.mac.mac_addr, new_mac_addr);
@@ -1256,54 +1279,302 @@ static int hclgevf_set_mac_addr(struct hnae3_handle *handle, void *p,
 	return status;
 }
 
-static int hclgevf_add_uc_addr(struct hnae3_handle *handle,
-			       const unsigned char *addr)
+static struct hclgevf_mac_addr_node *
+hclgevf_find_mac_node(struct list_head *list, const u8 *mac_addr)
+{
+	struct hclgevf_mac_addr_node *mac_node, *tmp;
+
+	list_for_each_entry_safe(mac_node, tmp, list, node)
+		if (ether_addr_equal(mac_addr, mac_node->mac_addr))
+			return mac_node;
+
+	return NULL;
+}
+
+static void hclgevf_update_mac_node(struct hclgevf_mac_addr_node *mac_node,
+				    enum HCLGEVF_MAC_NODE_STATE state)
+{
+	switch (state) {
+	/* from set_rx_mode or tmp_add_list */
+	case HCLGEVF_MAC_TO_ADD:
+		if (mac_node->state == HCLGEVF_MAC_TO_DEL)
+			mac_node->state = HCLGEVF_MAC_ACTIVE;
+		break;
+	/* only from set_rx_mode */
+	case HCLGEVF_MAC_TO_DEL:
+		if (mac_node->state == HCLGEVF_MAC_TO_ADD) {
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		} else {
+			mac_node->state = HCLGEVF_MAC_TO_DEL;
+		}
+		break;
+	/* only from tmp_add_list, the mac_node->state won't be
+	 * HCLGEVF_MAC_ACTIVE
+	 */
+	case HCLGEVF_MAC_ACTIVE:
+		if (mac_node->state == HCLGEVF_MAC_TO_ADD)
+			mac_node->state = HCLGEVF_MAC_ACTIVE;
+		break;
+	}
+}
+
+static int hclgevf_update_mac_list(struct hnae3_handle *handle,
+				   enum HCLGEVF_MAC_NODE_STATE state,
+				   enum HCLGEVF_MAC_ADDR_TYPE mac_type,
+				   const unsigned char *addr)
 {
 	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
-	struct hclge_vf_to_pf_msg send_msg;
+	struct hclgevf_mac_addr_node *mac_node;
+	struct list_head *list;
 
-	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_UNICAST,
-			       HCLGE_MBX_MAC_VLAN_UC_ADD);
-	ether_addr_copy(send_msg.data, addr);
-	return hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
+	list = (mac_type == HCLGEVF_MAC_ADDR_UC) ?
+	       &hdev->mac_table.uc_mac_list : &hdev->mac_table.mc_mac_list;
+
+	spin_lock_bh(&hdev->mac_table.mac_list_lock);
+
+	/* if the mac addr is already in the mac list, no need to add a new
+	 * one into it, just check the mac addr state, convert it to a new
+	 * new state, or just remove it, or do nothing.
+	 */
+	mac_node = hclgevf_find_mac_node(list, addr);
+	if (mac_node) {
+		hclgevf_update_mac_node(mac_node, state);
+		spin_unlock_bh(&hdev->mac_table.mac_list_lock);
+		return 0;
+	}
+	/* if this address is never added, unnecessary to delete */
+	if (state == HCLGEVF_MAC_TO_DEL) {
+		spin_unlock_bh(&hdev->mac_table.mac_list_lock);
+		return -ENOENT;
+	}
+
+	mac_node = kzalloc(sizeof(*mac_node), GFP_ATOMIC);
+	if (!mac_node) {
+		spin_unlock_bh(&hdev->mac_table.mac_list_lock);
+		return -ENOMEM;
+	}
+
+	mac_node->state = state;
+	ether_addr_copy(mac_node->mac_addr, addr);
+	list_add_tail(&mac_node->node, list);
+
+	spin_unlock_bh(&hdev->mac_table.mac_list_lock);
+	return 0;
+}
+
+static int hclgevf_add_uc_addr(struct hnae3_handle *handle,
+			       const unsigned char *addr)
+{
+	return hclgevf_update_mac_list(handle, HCLGEVF_MAC_TO_ADD,
+				       HCLGEVF_MAC_ADDR_UC, addr);
 }
 
 static int hclgevf_rm_uc_addr(struct hnae3_handle *handle,
 			      const unsigned char *addr)
 {
-	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
-	struct hclge_vf_to_pf_msg send_msg;
-
-	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_UNICAST,
-			       HCLGE_MBX_MAC_VLAN_UC_REMOVE);
-	ether_addr_copy(send_msg.data, addr);
-	return hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
+	return hclgevf_update_mac_list(handle, HCLGEVF_MAC_TO_DEL,
+				       HCLGEVF_MAC_ADDR_UC, addr);
 }
 
 static int hclgevf_add_mc_addr(struct hnae3_handle *handle,
 			       const unsigned char *addr)
 {
-	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
-	struct hclge_vf_to_pf_msg send_msg;
-
-	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_MULTICAST,
-			       HCLGE_MBX_MAC_VLAN_MC_ADD);
-	ether_addr_copy(send_msg.data, addr);
-	return hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
+	return hclgevf_update_mac_list(handle, HCLGEVF_MAC_TO_ADD,
+				       HCLGEVF_MAC_ADDR_MC, addr);
 }
 
 static int hclgevf_rm_mc_addr(struct hnae3_handle *handle,
 			      const unsigned char *addr)
 {
-	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
+	return hclgevf_update_mac_list(handle, HCLGEVF_MAC_TO_DEL,
+				       HCLGEVF_MAC_ADDR_MC, addr);
+}
+
+static int hclgevf_add_del_mac_addr(struct hclgevf_dev *hdev,
+				    struct hclgevf_mac_addr_node *mac_node,
+				    enum HCLGEVF_MAC_ADDR_TYPE mac_type)
+{
 	struct hclge_vf_to_pf_msg send_msg;
+	u8 code, subcode;
 
-	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_MULTICAST,
-			       HCLGE_MBX_MAC_VLAN_MC_REMOVE);
-	ether_addr_copy(send_msg.data, addr);
+	if (mac_type == HCLGEVF_MAC_ADDR_UC) {
+		code = HCLGE_MBX_SET_UNICAST;
+		if (mac_node->state == HCLGEVF_MAC_TO_ADD)
+			subcode = HCLGE_MBX_MAC_VLAN_UC_ADD;
+		else
+			subcode = HCLGE_MBX_MAC_VLAN_UC_REMOVE;
+	} else {
+		code = HCLGE_MBX_SET_MULTICAST;
+		if (mac_node->state == HCLGEVF_MAC_TO_ADD)
+			subcode = HCLGE_MBX_MAC_VLAN_MC_ADD;
+		else
+			subcode = HCLGE_MBX_MAC_VLAN_MC_REMOVE;
+	}
+
+	hclgevf_build_send_msg(&send_msg, code, subcode);
+	ether_addr_copy(send_msg.data, mac_node->mac_addr);
 	return hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
 }
 
+static void hclgevf_config_mac_list(struct hclgevf_dev *hdev,
+				    struct list_head *list,
+				    enum HCLGEVF_MAC_ADDR_TYPE mac_type)
+{
+	struct hclgevf_mac_addr_node *mac_node, *tmp;
+	int ret;
+
+	list_for_each_entry_safe(mac_node, tmp, list, node) {
+		ret = hclgevf_add_del_mac_addr(hdev, mac_node, mac_type);
+		if  (ret) {
+			dev_err(&hdev->pdev->dev,
+				"failed to configure mac %pM, state = %d, ret = %d\n",
+				mac_node->mac_addr, mac_node->state, ret);
+			return;
+		}
+		if (mac_node->state == HCLGEVF_MAC_TO_ADD) {
+			mac_node->state = HCLGEVF_MAC_ACTIVE;
+		} else {
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		}
+	}
+}
+
+static void hclgevf_sync_from_add_list(struct list_head *add_list,
+				       struct list_head *mac_list)
+{
+	struct hclgevf_mac_addr_node *mac_node, *tmp, *new_node;
+
+	list_for_each_entry_safe(mac_node, tmp, add_list, node) {
+		/* if the mac address from tmp_add_list is not in the
+		 * uc/mc_mac_list, it means have received a TO_DEL request
+		 * during the time window of sending mac config request to PF
+		 * If mac_node state is ACTIVE, then change its state to TO_DEL,
+		 * then it will be removed at next time. If is TO_ADD, it means
+		 * send TO_ADD request failed, so just remove the mac node.
+		 */
+		new_node = hclgevf_find_mac_node(mac_list, mac_node->mac_addr);
+		if (new_node) {
+			hclgevf_update_mac_node(new_node, mac_node->state);
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		} else if (mac_node->state == HCLGEVF_MAC_ACTIVE) {
+			mac_node->state = HCLGEVF_MAC_TO_DEL;
+			list_del(&mac_node->node);
+			list_add_tail(&mac_node->node, mac_list);
+		} else {
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		}
+	}
+}
+
+static void hclgevf_sync_from_del_list(struct list_head *del_list,
+				       struct list_head *mac_list)
+{
+	struct hclgevf_mac_addr_node *mac_node, *tmp, *new_node;
+
+	list_for_each_entry_safe(mac_node, tmp, del_list, node) {
+		new_node = hclgevf_find_mac_node(mac_list, mac_node->mac_addr);
+		if (new_node) {
+			/* If the mac addr is exist in the mac list, it means
+			 * received a new request TO_ADD during the time window
+			 * of sending mac addr configurrequest to PF, so just
+			 * change the mac state to ACTIVE.
+			 */
+			new_node->state = HCLGEVF_MAC_ACTIVE;
+			list_del(&mac_node->node);
+			kfree(mac_node);
+		} else {
+			list_del(&mac_node->node);
+			list_add_tail(&mac_node->node, mac_list);
+		}
+	}
+}
+
+static void hclgevf_clear_list(struct list_head *list)
+{
+	struct hclgevf_mac_addr_node *mac_node, *tmp;
+
+	list_for_each_entry_safe(mac_node, tmp, list, node) {
+		list_del(&mac_node->node);
+		kfree(mac_node);
+	}
+}
+
+static void hclgevf_sync_mac_list(struct hclgevf_dev *hdev,
+				  enum HCLGEVF_MAC_ADDR_TYPE mac_type)
+{
+	struct hclgevf_mac_addr_node *mac_node, *tmp, *new_node;
+	struct list_head tmp_add_list, tmp_del_list;
+	struct list_head *list;
+
+	INIT_LIST_HEAD(&tmp_add_list);
+	INIT_LIST_HEAD(&tmp_del_list);
+
+	/* move the mac addr to the tmp_add_list and tmp_del_list, then
+	 * we can add/delete these mac addr outside the spin lock
+	 */
+	list = (mac_type == HCLGEVF_MAC_ADDR_UC) ?
+		&hdev->mac_table.uc_mac_list : &hdev->mac_table.mc_mac_list;
+
+	spin_lock_bh(&hdev->mac_table.mac_list_lock);
+
+	list_for_each_entry_safe(mac_node, tmp, list, node) {
+		switch (mac_node->state) {
+		case HCLGEVF_MAC_TO_DEL:
+			list_del(&mac_node->node);
+			list_add_tail(&mac_node->node, &tmp_del_list);
+			break;
+		case HCLGEVF_MAC_TO_ADD:
+			new_node = kzalloc(sizeof(*new_node), GFP_ATOMIC);
+			if (!new_node)
+				goto stop_traverse;
+
+			ether_addr_copy(new_node->mac_addr, mac_node->mac_addr);
+			new_node->state = mac_node->state;
+			list_add_tail(&new_node->node, &tmp_add_list);
+			break;
+		default:
+			break;
+		}
+	}
+
+stop_traverse:
+	spin_unlock_bh(&hdev->mac_table.mac_list_lock);
+
+	/* delete first, in order to get max mac table space for adding */
+	hclgevf_config_mac_list(hdev, &tmp_del_list, mac_type);
+	hclgevf_config_mac_list(hdev, &tmp_add_list, mac_type);
+
+	/* if some mac addresses were added/deleted fail, move back to the
+	 * mac_list, and retry at next time.
+	 */
+	spin_lock_bh(&hdev->mac_table.mac_list_lock);
+
+	hclgevf_sync_from_del_list(&tmp_del_list, list);
+	hclgevf_sync_from_add_list(&tmp_add_list, list);
+
+	spin_unlock_bh(&hdev->mac_table.mac_list_lock);
+}
+
+static void hclgevf_sync_mac_table(struct hclgevf_dev *hdev)
+{
+	hclgevf_sync_mac_list(hdev, HCLGEVF_MAC_ADDR_UC);
+	hclgevf_sync_mac_list(hdev, HCLGEVF_MAC_ADDR_MC);
+}
+
+static void hclgevf_uninit_mac_list(struct hclgevf_dev *hdev)
+{
+	spin_lock_bh(&hdev->mac_table.mac_list_lock);
+
+	hclgevf_clear_list(&hdev->mac_table.uc_mac_list);
+	hclgevf_clear_list(&hdev->mac_table.mc_mac_list);
+
+	spin_unlock_bh(&hdev->mac_table.mac_list_lock);
+}
+
 static int hclgevf_set_vlan_filter(struct hnae3_handle *handle,
 				   __be16 proto, u16 vlan_id,
 				   bool is_kill)
@@ -1506,10 +1777,6 @@ static int hclgevf_reset_stack(struct hclgevf_dev *hdev)
 	if (ret)
 		return ret;
 
-	ret = hclgevf_notify_client(hdev, HNAE3_RESTORE_CLIENT);
-	if (ret)
-		return ret;
-
 	/* clear handshake status with IMP */
 	hclgevf_reset_handshake(hdev, false);
 
@@ -1589,13 +1856,8 @@ static void hclgevf_reset_err_handle(struct hclgevf_dev *hdev)
 
 static int hclgevf_reset_prepare(struct hclgevf_dev *hdev)
 {
-	struct hnae3_ae_dev *ae_dev = pci_get_drvdata(hdev->pdev);
 	int ret;
 
-	/* Initialize ae_dev reset status as well, in case enet layer wants to
-	 * know if device is undergoing reset
-	 */
-	ae_dev->reset_type = hdev->reset_type;
 	hdev->rst_stats.rst_cnt++;
 
 	rtnl_lock();
@@ -1610,7 +1872,6 @@ static int hclgevf_reset_prepare(struct hclgevf_dev *hdev)
 
 static int hclgevf_reset_rebuild(struct hclgevf_dev *hdev)
 {
-	struct hnae3_ae_dev *ae_dev = pci_get_drvdata(hdev->pdev);
 	int ret;
 
 	hdev->rst_stats.hw_rst_done_cnt++;
@@ -1625,7 +1886,6 @@ static int hclgevf_reset_rebuild(struct hclgevf_dev *hdev)
 	}
 
 	hdev->last_reset_time = jiffies;
-	ae_dev->reset_type = HNAE3_NONE_RESET;
 	hdev->rst_stats.rst_done_cnt++;
 	hdev->rst_stats.rst_fail_cnt = 0;
 	clear_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state);
@@ -1951,6 +2211,10 @@ static void hclgevf_periodic_service_task(struct hclgevf_dev *hdev)
 
 	hclgevf_sync_vlan_filter(hdev);
 
+	hclgevf_sync_mac_table(hdev);
+
+	hclgevf_sync_promisc_mode(hdev);
+
 	hdev->last_serv_processed = jiffies;
 
 out:
@@ -2313,6 +2577,10 @@ static void hclgevf_state_init(struct hclgevf_dev *hdev)
 	mutex_init(&hdev->mbx_resp.mbx_mutex);
 	sema_init(&hdev->reset_sem, 1);
 
+	spin_lock_init(&hdev->mac_table.mac_list_lock);
+	INIT_LIST_HEAD(&hdev->mac_table.uc_mac_list);
+	INIT_LIST_HEAD(&hdev->mac_table.mc_mac_list);
+
 	/* bring the device down */
 	set_bit(HCLGEVF_STATE_DOWN, &hdev->state);
 }
@@ -2695,6 +2963,15 @@ static int hclgevf_pci_reset(struct hclgevf_dev *hdev)
 	return ret;
 }
 
+static int hclgevf_clear_vport_list(struct hclgevf_dev *hdev)
+{
+	struct hclge_vf_to_pf_msg send_msg;
+
+	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_HANDLE_VF_TBL,
+			       HCLGE_MBX_VPORT_LIST_CLEAR);
+	return hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
+}
+
 static int hclgevf_reset_hdev(struct hclgevf_dev *hdev)
 {
 	struct pci_dev *pdev = hdev->pdev;
@@ -2730,6 +3007,8 @@ static int hclgevf_reset_hdev(struct hclgevf_dev *hdev)
 		return ret;
 	}
 
+	set_bit(HCLGEVF_STATE_PROMISC_CHANGED, &hdev->state);
+
 	dev_info(&hdev->pdev->dev, "Reset done\n");
 
 	return 0;
@@ -2802,6 +3081,15 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
 		goto err_config;
 	}
 
+	/* ensure vf tbl list as empty before init*/
+	ret = hclgevf_clear_vport_list(hdev);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to clear tbl list configuration, ret = %d.\n",
+			ret);
+		goto err_config;
+	}
+
 	ret = hclgevf_init_vlan_config(hdev);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
@@ -2846,6 +3134,7 @@ static void hclgevf_uninit_hdev(struct hclgevf_dev *hdev)
 
 	hclgevf_pci_uninit(hdev);
 	hclgevf_cmd_uninit(hdev);
+	hclgevf_uninit_mac_list(hdev);
 }
 
 static int hclgevf_init_ae_dev(struct hnae3_ae_dev *ae_dev)
@@ -3213,6 +3502,7 @@ static const struct hnae3_ae_ops hclgevf_ops = {
 	.set_timer_task = hclgevf_set_timer_task,
 	.get_link_mode = hclgevf_get_link_mode,
 	.set_promisc_mode = hclgevf_set_promisc_mode,
+	.request_update_promisc_mode = hclgevf_request_update_promisc_mode,
 };
 
 static struct hnae3_ae_algo ae_algovf = {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index 3b88d866facc..f19583c4bc9b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -148,6 +148,7 @@ enum hclgevf_states {
 	HCLGEVF_STATE_MBX_HANDLING,
 	HCLGEVF_STATE_CMD_DISABLE,
 	HCLGEVF_STATE_LINK_UPDATING,
+	HCLGEVF_STATE_PROMISC_CHANGED,
 	HCLGEVF_STATE_RST_FAIL,
 };
 
@@ -234,6 +235,29 @@ struct hclgevf_rst_stats {
 	u32 rst_fail_cnt;		/* the number of VF reset fail */
 };
 
+enum HCLGEVF_MAC_ADDR_TYPE {
+	HCLGEVF_MAC_ADDR_UC,
+	HCLGEVF_MAC_ADDR_MC
+};
+
+enum HCLGEVF_MAC_NODE_STATE {
+	HCLGEVF_MAC_TO_ADD,
+	HCLGEVF_MAC_TO_DEL,
+	HCLGEVF_MAC_ACTIVE
+};
+
+struct hclgevf_mac_addr_node {
+	struct list_head node;
+	enum HCLGEVF_MAC_NODE_STATE state;
+	u8 mac_addr[ETH_ALEN];
+};
+
+struct hclgevf_mac_table_cfg {
+	spinlock_t mac_list_lock; /* protect mac address need to add/detele */
+	struct list_head uc_mac_list;
+	struct list_head mc_mac_list;
+};
+
 struct hclgevf_dev {
 	struct pci_dev *pdev;
 	struct hnae3_ae_dev *ae_dev;
@@ -282,6 +306,8 @@ struct hclgevf_dev {
 
 	unsigned long vlan_del_fail_bmap[BITS_TO_LONGS(VLAN_N_VID)];
 
+	struct hclgevf_mac_table_cfg mac_table;
+
 	bool mbx_event_pending;
 	struct hclgevf_mbx_resp_status mbx_resp; /* mailbox response */
 	struct hclgevf_mbx_arq_ring arq; /* mailbox async rx queue */
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c
index 9b8154955f91..5b2dcd97c107 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c
@@ -5,6 +5,9 @@
 #include "hclgevf_main.h"
 #include "hnae3.h"
 
+#define CREATE_TRACE_POINTS
+#include "hclgevf_trace.h"
+
 static int hclgevf_resp_to_errno(u16 resp_code)
 {
 	return resp_code ? -resp_code : 0;
@@ -106,6 +109,8 @@ int hclgevf_send_mbx_msg(struct hclgevf_dev *hdev,
 
 	memcpy(&req->msg, send_msg, sizeof(struct hclge_vf_to_pf_msg));
 
+	trace_hclge_vf_mbx_send(hdev, req);
+
 	/* synchronous send */
 	if (need_resp) {
 		mutex_lock(&hdev->mbx_resp.mbx_mutex);
@@ -179,6 +184,8 @@ void hclgevf_mbx_handler(struct hclgevf_dev *hdev)
 			continue;
 		}
 
+		trace_hclge_vf_mbx_get(hdev, req);
+
 		/* synchronous messages are time critical and need preferential
 		 * treatment. Therefore, we need to acknowledge all the sync
 		 * responses as quickly as possible so that waiting tasks do not
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_trace.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_trace.h
new file mode 100644
index 000000000000..e4bfb6191fef
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_trace.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (c) 2018-2019 Hisilicon Limited. */
+
+/* This must be outside ifdef _HCLGEVF_TRACE_H */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM hns3
+
+#if !defined(_HCLGEVF_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _HCLGEVF_TRACE_H_
+
+#include <linux/tracepoint.h>
+
+#define VF_GET_MBX_LEN	(sizeof(struct hclge_mbx_pf_to_vf_cmd) / sizeof(u32))
+#define VF_SEND_MBX_LEN	(sizeof(struct hclge_mbx_vf_to_pf_cmd) / sizeof(u32))
+
+TRACE_EVENT(hclge_vf_mbx_get,
+	TP_PROTO(
+		struct hclgevf_dev *hdev,
+		struct hclge_mbx_pf_to_vf_cmd *req),
+	TP_ARGS(hdev, req),
+
+	TP_STRUCT__entry(
+		__field(u8, vfid)
+		__field(u16, code)
+		__string(pciname, pci_name(hdev->pdev))
+		__string(devname, &hdev->nic.kinfo.netdev->name)
+		__array(u32, mbx_data, VF_GET_MBX_LEN)
+	),
+
+	TP_fast_assign(
+		__entry->vfid = req->dest_vfid;
+		__entry->code = req->msg.code;
+		__assign_str(pciname, pci_name(hdev->pdev));
+		__assign_str(devname, &hdev->nic.kinfo.netdev->name);
+		memcpy(__entry->mbx_data, req,
+		       sizeof(struct hclge_mbx_pf_to_vf_cmd));
+	),
+
+	TP_printk(
+		"%s %s vfid:%u code:%u data:%s",
+		__get_str(pciname), __get_str(devname), __entry->vfid,
+		__entry->code,
+		__print_array(__entry->mbx_data, VF_GET_MBX_LEN, sizeof(u32))
+	)
+);
+
+TRACE_EVENT(hclge_vf_mbx_send,
+	TP_PROTO(
+		struct hclgevf_dev *hdev,
+		struct hclge_mbx_vf_to_pf_cmd *req),
+	TP_ARGS(hdev, req),
+
+	TP_STRUCT__entry(
+		__field(u8, vfid)
+		__field(u8, code)
+		__field(u8, subcode)
+		__string(pciname, pci_name(hdev->pdev))
+		__string(devname, &hdev->nic.kinfo.netdev->name)
+		__array(u32, mbx_data, VF_SEND_MBX_LEN)
+	),
+
+	TP_fast_assign(
+		__entry->vfid = req->mbx_src_vfid;
+		__entry->code = req->msg.code;
+		__entry->subcode = req->msg.subcode;
+		__assign_str(pciname, pci_name(hdev->pdev));
+		__assign_str(devname, &hdev->nic.kinfo.netdev->name);
+		memcpy(__entry->mbx_data, req,
+		       sizeof(struct hclge_mbx_vf_to_pf_cmd));
+	),
+
+	TP_printk(
+		"%s %s vfid:%u code:%u subcode:%u data:%s",
+		__get_str(pciname), __get_str(devname), __entry->vfid,
+		__entry->code, __entry->subcode,
+		__print_array(__entry->mbx_data, VF_SEND_MBX_LEN, sizeof(u32))
+	)
+);
+
+#endif /* _HCLGEVF_TRACE_H_ */
+
+/* This must be outside ifdef _HCLGEVF_TRACE_H */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE hclgevf_trace
+#include <trace/define_trace.h>
diff --git a/drivers/net/ethernet/huawei/hinic/Makefile b/drivers/net/ethernet/huawei/hinic/Makefile
index fe88ab88cacc..32a011ca44c3 100644
--- a/drivers/net/ethernet/huawei/hinic/Makefile
+++ b/drivers/net/ethernet/huawei/hinic/Makefile
@@ -4,4 +4,4 @@ obj-$(CONFIG_HINIC) += hinic.o
 hinic-y := hinic_main.o hinic_tx.o hinic_rx.o hinic_port.o hinic_hw_dev.o \
 	   hinic_hw_io.o hinic_hw_qp.o hinic_hw_cmdq.o hinic_hw_wq.o \
 	   hinic_hw_mgmt.o hinic_hw_api_cmd.o hinic_hw_eqs.o hinic_hw_if.o \
-	   hinic_common.o hinic_ethtool.o
+	   hinic_common.o hinic_ethtool.o hinic_hw_mbox.o hinic_sriov.o
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_dev.h
index a209b14160cc..a621ebbf7610 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_dev.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_dev.h
@@ -16,6 +16,7 @@
 #include "hinic_hw_dev.h"
 #include "hinic_tx.h"
 #include "hinic_rx.h"
+#include "hinic_sriov.h"
 
 #define HINIC_DRV_NAME          "hinic"
 
@@ -23,6 +24,7 @@ enum hinic_flags {
 	HINIC_LINK_UP = BIT(0),
 	HINIC_INTF_UP = BIT(1),
 	HINIC_RSS_ENABLE = BIT(2),
+	HINIC_LINK_DOWN = BIT(3),
 };
 
 struct hinic_rx_mode_work {
@@ -78,6 +80,7 @@ struct hinic_dev {
 	struct hinic_rss_type		rss_type;
 	u8				*rss_hkey_user;
 	s32				*rss_indir_user;
+	struct hinic_sriov_info sriov_info;
 };
 
 #endif
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
index 5f2d57d1b2d3..33c5333657c1 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
@@ -64,7 +64,7 @@
 #define CMDQ_WQE_SIZE                   64
 #define CMDQ_DEPTH                      SZ_4K
 
-#define CMDQ_WQ_PAGE_SIZE               SZ_4K
+#define CMDQ_WQ_PAGE_SIZE               SZ_256K
 
 #define WQE_LCMD_SIZE                   64
 #define WQE_SCMD_SIZE                   64
@@ -705,7 +705,7 @@ static void cmdq_init_queue_ctxt(struct hinic_cmdq_ctxt *cmdq_ctxt,
 	/* The data in the HW is in Big Endian Format */
 	wq_first_page_paddr = be64_to_cpu(*wq->block_vaddr);
 
-	pfn = CMDQ_PFN(wq_first_page_paddr, wq->wq_page_size);
+	pfn = CMDQ_PFN(wq_first_page_paddr, SZ_4K);
 
 	ctxt_info->curr_wqe_page_pfn =
 		HINIC_CMDQ_CTXT_PAGE_INFO_SET(pfn, CURR_WQE_PAGE_PFN)   |
@@ -714,16 +714,19 @@ static void cmdq_init_queue_ctxt(struct hinic_cmdq_ctxt *cmdq_ctxt,
 		HINIC_CMDQ_CTXT_PAGE_INFO_SET(1, CEQ_EN)                |
 		HINIC_CMDQ_CTXT_PAGE_INFO_SET(cmdq->wrapped, WRAPPED);
 
-	/* block PFN - Read Modify Write */
-	cmdq_first_block_paddr = cmdq_pages->page_paddr;
+	if (wq->num_q_pages != 1) {
+		/* block PFN - Read Modify Write */
+		cmdq_first_block_paddr = cmdq_pages->page_paddr;
 
-	pfn = CMDQ_PFN(cmdq_first_block_paddr, wq->wq_page_size);
+		pfn = CMDQ_PFN(cmdq_first_block_paddr, wq->wq_page_size);
+	}
 
 	ctxt_info->wq_block_pfn =
 		HINIC_CMDQ_CTXT_BLOCK_INFO_SET(pfn, WQ_BLOCK_PFN) |
 		HINIC_CMDQ_CTXT_BLOCK_INFO_SET(atomic_read(&wq->cons_idx), CI);
 
 	cmdq_ctxt->func_idx = HINIC_HWIF_FUNC_IDX(cmdqs->hwif);
+	cmdq_ctxt->ppf_idx = HINIC_HWIF_PPF_IDX(cmdqs->hwif);
 	cmdq_ctxt->cmdq_type  = cmdq->cmdq_type;
 }
 
@@ -795,11 +798,6 @@ static int init_cmdqs_ctxt(struct hinic_hwdev *hwdev,
 	size_t cmdq_ctxts_size;
 	int err;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI function type\n");
-		return -EINVAL;
-	}
-
 	cmdq_ctxts_size = HINIC_MAX_CMDQ_TYPES * sizeof(*cmdq_ctxts);
 	cmdq_ctxts = devm_kzalloc(&pdev->dev, cmdq_ctxts_size, GFP_KERNEL);
 	if (!cmdq_ctxts)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h
index 7a434b653faa..3e4b0aef9fe6 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h
@@ -122,7 +122,7 @@ struct hinic_cmdq_ctxt {
 
 	u16     func_idx;
 	u8      cmdq_type;
-	u8      rsvd1[1];
+	u8      ppf_idx;
 
 	u8      rsvd2[4];
 
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h
index cdec1d0a3962..7e84e4e33fff 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h
@@ -10,7 +10,7 @@
 /* HW interface registers */
 #define HINIC_CSR_FUNC_ATTR0_ADDR                       0x0
 #define HINIC_CSR_FUNC_ATTR1_ADDR                       0x4
-
+#define HINIC_CSR_FUNC_ATTR2_ADDR			0x8
 #define HINIC_CSR_FUNC_ATTR4_ADDR                       0x10
 #define HINIC_CSR_FUNC_ATTR5_ADDR                       0x14
 
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
index c7c75b772a86..e5cab58e4ddd 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
@@ -15,7 +15,9 @@
 #include <linux/jiffies.h>
 #include <linux/log2.h>
 #include <linux/err.h>
+#include <linux/netdevice.h>
 
+#include "hinic_sriov.h"
 #include "hinic_hw_if.h"
 #include "hinic_hw_eqs.h"
 #include "hinic_hw_mgmt.h"
@@ -46,20 +48,6 @@ enum hw_ioctxt_set_cmdq_depth {
 	HW_IOCTXT_SET_CMDQ_DEPTH_DEFAULT,
 };
 
-/* HW struct */
-struct hinic_dev_cap {
-	u8      status;
-	u8      version;
-	u8      rsvd0[6];
-
-	u8      rsvd1[5];
-	u8      intr_type;
-	u8      rsvd2[66];
-	u16     max_sqs;
-	u16     max_rqs;
-	u8      rsvd3[208];
-};
-
 /**
  * get_capability - convert device capabilities to NIC capabilities
  * @hwdev: the HW device to set and convert device capabilities for
@@ -67,16 +55,13 @@ struct hinic_dev_cap {
  *
  * Return 0 - Success, negative - Failure
  **/
-static int get_capability(struct hinic_hwdev *hwdev,
-			  struct hinic_dev_cap *dev_cap)
+static int parse_capability(struct hinic_hwdev *hwdev,
+			    struct hinic_dev_cap *dev_cap)
 {
 	struct hinic_cap *nic_cap = &hwdev->nic_cap;
 	int num_aeqs, num_ceqs, num_irqs;
 
-	if (!HINIC_IS_PF(hwdev->hwif) && !HINIC_IS_PPF(hwdev->hwif))
-		return -EINVAL;
-
-	if (dev_cap->intr_type != INTR_MSIX_TYPE)
+	if (!HINIC_IS_VF(hwdev->hwif) && dev_cap->intr_type != INTR_MSIX_TYPE)
 		return -EFAULT;
 
 	num_aeqs = HINIC_HWIF_NUM_AEQS(hwdev->hwif);
@@ -89,13 +74,19 @@ static int get_capability(struct hinic_hwdev *hwdev,
 	if (nic_cap->num_qps > HINIC_Q_CTXT_MAX)
 		nic_cap->num_qps = HINIC_Q_CTXT_MAX;
 
-	nic_cap->max_qps = dev_cap->max_sqs + 1;
-	if (nic_cap->max_qps != (dev_cap->max_rqs + 1))
-		return -EFAULT;
+	if (!HINIC_IS_VF(hwdev->hwif))
+		nic_cap->max_qps = dev_cap->max_sqs + 1;
+	else
+		nic_cap->max_qps = dev_cap->max_sqs;
 
 	if (nic_cap->num_qps > nic_cap->max_qps)
 		nic_cap->num_qps = nic_cap->max_qps;
 
+	if (!HINIC_IS_VF(hwdev->hwif)) {
+		nic_cap->max_vf = dev_cap->max_vf;
+		nic_cap->max_vf_qps = dev_cap->max_vf_sqs + 1;
+	}
+
 	return 0;
 }
 
@@ -105,27 +96,26 @@ static int get_capability(struct hinic_hwdev *hwdev,
  *
  * Return 0 - Success, negative - Failure
  **/
-static int get_cap_from_fw(struct hinic_pfhwdev *pfhwdev)
+static int get_capability(struct hinic_pfhwdev *pfhwdev)
 {
 	struct hinic_hwdev *hwdev = &pfhwdev->hwdev;
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_dev_cap dev_cap;
-	u16 in_len, out_len;
+	u16 out_len;
 	int err;
 
-	in_len = 0;
 	out_len = sizeof(dev_cap);
 
 	err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_CFGM,
-				HINIC_CFG_NIC_CAP, &dev_cap, in_len, &dev_cap,
-				&out_len, HINIC_MGMT_MSG_SYNC);
+				HINIC_CFG_NIC_CAP, &dev_cap, sizeof(dev_cap),
+				&dev_cap, &out_len, HINIC_MGMT_MSG_SYNC);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to get capability from FW\n");
 		return err;
 	}
 
-	return get_capability(hwdev, &dev_cap);
+	return parse_capability(hwdev, &dev_cap);
 }
 
 /**
@@ -144,15 +134,14 @@ static int get_dev_cap(struct hinic_hwdev *hwdev)
 	switch (HINIC_FUNC_TYPE(hwif)) {
 	case HINIC_PPF:
 	case HINIC_PF:
+	case HINIC_VF:
 		pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
-
-		err = get_cap_from_fw(pfhwdev);
+		err = get_capability(pfhwdev);
 		if (err) {
-			dev_err(&pdev->dev, "Failed to get capability from FW\n");
+			dev_err(&pdev->dev, "Failed to get capability\n");
 			return err;
 		}
 		break;
-
 	default:
 		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
 		return -EINVAL;
@@ -225,15 +214,8 @@ static void disable_msix(struct hinic_hwdev *hwdev)
 int hinic_port_msg_cmd(struct hinic_hwdev *hwdev, enum hinic_port_cmd cmd,
 		       void *buf_in, u16 in_size, void *buf_out, u16 *out_size)
 {
-	struct hinic_hwif *hwif = hwdev->hwif;
-	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_pfhwdev *pfhwdev;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
 	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
 
 	return hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_L2NIC, cmd,
@@ -252,14 +234,9 @@ static int init_fw_ctxt(struct hinic_hwdev *hwdev)
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_cmd_fw_ctxt fw_ctxt;
-	u16 out_size;
+	u16 out_size = sizeof(fw_ctxt);
 	int err;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
 	fw_ctxt.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
 	fw_ctxt.rx_buf_sz = HINIC_RX_BUF_SZ;
 
@@ -288,14 +265,8 @@ static int set_hw_ioctxt(struct hinic_hwdev *hwdev, unsigned int rq_depth,
 {
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct hinic_cmd_hw_ioctxt hw_ioctxt;
-	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_pfhwdev *pfhwdev;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
 	hw_ioctxt.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
 	hw_ioctxt.ppf_idx = HINIC_HWIF_PPF_IDX(hwif);
 
@@ -374,11 +345,6 @@ static int clear_io_resources(struct hinic_hwdev *hwdev)
 	struct hinic_pfhwdev *pfhwdev;
 	int err;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
 	/* sleep 100ms to wait for firmware stopping I/O */
 	msleep(100);
 
@@ -410,14 +376,8 @@ static int set_resources_state(struct hinic_hwdev *hwdev,
 {
 	struct hinic_cmd_set_res_state res_state;
 	struct hinic_hwif *hwif = hwdev->hwif;
-	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_pfhwdev *pfhwdev;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
 	res_state.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
 	res_state.state = state;
 
@@ -441,8 +401,8 @@ static int get_base_qpn(struct hinic_hwdev *hwdev, u16 *base_qpn)
 {
 	struct hinic_cmd_base_qpn cmd_base_qpn;
 	struct hinic_hwif *hwif = hwdev->hwif;
+	u16 out_size = sizeof(cmd_base_qpn);
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
 	int err;
 
 	cmd_base_qpn.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
@@ -488,7 +448,7 @@ int hinic_hwdev_ifup(struct hinic_hwdev *hwdev)
 	num_ceqs = HINIC_HWIF_NUM_CEQS(hwif);
 
 	ceq_msix_entries = &hwdev->msix_entries[num_aeqs];
-
+	func_to_io->hwdev = hwdev;
 	err = hinic_io_init(func_to_io, hwif, nic_cap->max_qps, num_ceqs,
 			    ceq_msix_entries);
 	if (err) {
@@ -558,17 +518,10 @@ void hinic_hwdev_cb_register(struct hinic_hwdev *hwdev,
 					     u16 in_size, void *buf_out,
 					     u16 *out_size))
 {
-	struct hinic_hwif *hwif = hwdev->hwif;
-	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_pfhwdev *pfhwdev;
 	struct hinic_nic_cb *nic_cb;
 	u8 cmd_cb;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "unsupported PCI Function type\n");
-		return;
-	}
-
 	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
 
 	cmd_cb = cmd - HINIC_MGMT_MSG_CMD_BASE;
@@ -588,15 +541,12 @@ void hinic_hwdev_cb_unregister(struct hinic_hwdev *hwdev,
 			       enum hinic_mgmt_msg_cmd cmd)
 {
 	struct hinic_hwif *hwif = hwdev->hwif;
-	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_pfhwdev *pfhwdev;
 	struct hinic_nic_cb *nic_cb;
 	u8 cmd_cb;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "unsupported PCI Function type\n");
+	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif))
 		return;
-	}
 
 	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
 
@@ -676,10 +626,23 @@ static int init_pfhwdev(struct hinic_pfhwdev *pfhwdev)
 		return err;
 	}
 
-	hinic_register_mgmt_msg_cb(&pfhwdev->pf_to_mgmt, HINIC_MOD_L2NIC,
-				   pfhwdev, nic_mgmt_msg_handler);
+	err = hinic_func_to_func_init(hwdev);
+	if (err) {
+		dev_err(&hwif->pdev->dev, "Failed to init mailbox\n");
+		hinic_pf_to_mgmt_free(&pfhwdev->pf_to_mgmt);
+		return err;
+	}
+
+	if (!HINIC_IS_VF(hwif))
+		hinic_register_mgmt_msg_cb(&pfhwdev->pf_to_mgmt,
+					   HINIC_MOD_L2NIC, pfhwdev,
+					   nic_mgmt_msg_handler);
+	else
+		hinic_register_vf_mbox_cb(hwdev, HINIC_MOD_L2NIC,
+					  nic_mgmt_msg_handler);
 
 	hinic_set_pf_action(hwif, HINIC_PF_MGMT_ACTIVE);
+
 	return 0;
 }
 
@@ -693,7 +656,13 @@ static void free_pfhwdev(struct hinic_pfhwdev *pfhwdev)
 
 	hinic_set_pf_action(hwdev->hwif, HINIC_PF_MGMT_INIT);
 
-	hinic_unregister_mgmt_msg_cb(&pfhwdev->pf_to_mgmt, HINIC_MOD_L2NIC);
+	if (!HINIC_IS_VF(hwdev->hwif))
+		hinic_unregister_mgmt_msg_cb(&pfhwdev->pf_to_mgmt,
+					     HINIC_MOD_L2NIC);
+	else
+		hinic_unregister_vf_mbox_cb(hwdev, HINIC_MOD_L2NIC);
+
+	hinic_func_to_func_free(hwdev);
 
 	hinic_pf_to_mgmt_free(&pfhwdev->pf_to_mgmt);
 }
@@ -723,12 +692,6 @@ struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev)
 		return ERR_PTR(err);
 	}
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
-		err = -EFAULT;
-		goto err_func_type;
-	}
-
 	pfhwdev = devm_kzalloc(&pdev->dev, sizeof(*pfhwdev), GFP_KERNEL);
 	if (!pfhwdev) {
 		err = -ENOMEM;
@@ -772,6 +735,12 @@ struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev)
 		goto err_dev_cap;
 	}
 
+	err = hinic_vf_func_init(hwdev);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to init nic mbox\n");
+		goto err_vf_func_init;
+	}
+
 	err = init_fw_ctxt(hwdev);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to init function table\n");
@@ -788,6 +757,8 @@ struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev)
 
 err_resources_state:
 err_init_fw_ctxt:
+	hinic_vf_func_free(hwdev);
+err_vf_func_init:
 err_dev_cap:
 	free_pfhwdev(pfhwdev);
 
@@ -799,7 +770,6 @@ struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev)
 
 err_init_msix:
 err_pfhwdev_alloc:
-err_func_type:
 	hinic_free_hwif(hwif);
 	return ERR_PTR(err);
 }
@@ -930,15 +900,9 @@ int hinic_hwdev_hw_ci_addr_set(struct hinic_hwdev *hwdev, struct hinic_sq *sq,
 {
 	struct hinic_qp *qp = container_of(sq, struct hinic_qp, sq);
 	struct hinic_hwif *hwif = hwdev->hwif;
-	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_pfhwdev *pfhwdev;
 	struct hinic_cmd_hw_ci hw_ci;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
 	hw_ci.dma_attr_off  = 0;
 	hw_ci.pending_limit = pending_limit;
 	hw_ci.coalesc_timer = coalesc_timer;
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
index 66fd2340d447..531d1072e0df 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
@@ -16,18 +16,27 @@
 #include "hinic_hw_mgmt.h"
 #include "hinic_hw_qp.h"
 #include "hinic_hw_io.h"
+#include "hinic_hw_mbox.h"
 
 #define HINIC_MAX_QPS   32
 
 #define HINIC_MGMT_NUM_MSG_CMD  (HINIC_MGMT_MSG_CMD_MAX - \
 				 HINIC_MGMT_MSG_CMD_BASE)
 
+#define HINIC_PF_SET_VF_ALREADY				0x4
+#define HINIC_MGMT_STATUS_EXIST				0x6
+
 struct hinic_cap {
 	u16     max_qps;
 	u16     num_qps;
+	u8		max_vf;
+	u16     max_vf_qps;
 };
 
 enum hinic_port_cmd {
+	HINIC_PORT_CMD_VF_REGISTER = 0x0,
+	HINIC_PORT_CMD_VF_UNREGISTER = 0x1,
+
 	HINIC_PORT_CMD_CHANGE_MTU       = 2,
 
 	HINIC_PORT_CMD_ADD_VLAN         = 3,
@@ -83,10 +92,18 @@ enum hinic_port_cmd {
 
 	HINIC_PORT_CMD_GET_GLOBAL_QPN   = 102,
 
+	HINIC_PORT_CMD_SET_VF_VLAN	= 106,
+
+	HINIC_PORT_CMD_CLR_VF_VLAN,
+
 	HINIC_PORT_CMD_SET_TSO          = 112,
 
 	HINIC_PORT_CMD_SET_RQ_IQ_MAP	= 115,
 
+	HINIC_PORT_CMD_LINK_STATUS_REPORT = 160,
+
+	HINIC_PORT_CMD_UPDATE_MAC = 164,
+
 	HINIC_PORT_CMD_GET_CAP          = 170,
 
 	HINIC_PORT_CMD_SET_LRO_TIMER	= 244,
@@ -191,6 +208,17 @@ struct hinic_cmd_set_res_state {
 	u32     rsvd2;
 };
 
+struct hinic_ceq_ctrl_reg {
+	u8 status;
+	u8 version;
+	u8 rsvd0[6];
+
+	u16 func_id;
+	u16 q_id;
+	u32 ctrl0;
+	u32 ctrl1;
+};
+
 struct hinic_cmd_base_qpn {
 	u8      status;
 	u8      version;
@@ -225,6 +253,7 @@ struct hinic_hwdev {
 
 	struct hinic_aeqs               aeqs;
 	struct hinic_func_to_io         func_to_io;
+	struct hinic_mbox_func_to_func  *func_to_func;
 
 	struct hinic_cap                nic_cap;
 };
@@ -246,6 +275,25 @@ struct hinic_pfhwdev {
 	struct hinic_nic_cb             nic_cb[HINIC_MGMT_NUM_MSG_CMD];
 };
 
+struct hinic_dev_cap {
+	u8      status;
+	u8      version;
+	u8      rsvd0[6];
+
+	u8      rsvd1[5];
+	u8      intr_type;
+	u8	max_cos_id;
+	u8	er_id;
+	u8	port_id;
+	u8      max_vf;
+	u8      rsvd2[62];
+	u16     max_sqs;
+	u16	max_rqs;
+	u16	max_vf_sqs;
+	u16     max_vf_rqs;
+	u8      rsvd3[204];
+};
+
 void hinic_hwdev_cb_register(struct hinic_hwdev *hwdev,
 			     enum hinic_mgmt_msg_cmd cmd, void *handle,
 			     void (*handler)(void *handle, void *buf_in,
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c
index c0b6bcb067cd..397936cac304 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c
@@ -17,6 +17,7 @@
 #include <asm/byteorder.h>
 #include <asm/barrier.h>
 
+#include "hinic_hw_dev.h"
 #include "hinic_hw_csr.h"
 #include "hinic_hw_if.h"
 #include "hinic_hw_eqs.h"
@@ -416,11 +417,11 @@ static irqreturn_t ceq_interrupt(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void set_ctrl0(struct hinic_eq *eq)
+static u32 get_ctrl0_val(struct hinic_eq *eq, u32 addr)
 {
 	struct msix_entry *msix_entry = &eq->msix_entry;
 	enum hinic_eq_type type = eq->type;
-	u32 addr, val, ctrl0;
+	u32 val, ctrl0;
 
 	if (type == HINIC_AEQ) {
 		/* RMW Ctrl0 */
@@ -440,9 +441,7 @@ static void set_ctrl0(struct hinic_eq *eq)
 			HINIC_AEQ_CTRL_0_SET(EQ_INT_MODE_ARMED, INT_MODE);
 
 		val |= ctrl0;
-
-		hinic_hwif_write_reg(eq->hwif, addr, val);
-	} else if (type == HINIC_CEQ) {
+	} else {
 		/* RMW Ctrl0 */
 		addr = HINIC_CSR_CEQ_CTRL_0_ADDR(eq->q_id);
 
@@ -462,16 +461,28 @@ static void set_ctrl0(struct hinic_eq *eq)
 			HINIC_CEQ_CTRL_0_SET(EQ_INT_MODE_ARMED, INTR_MODE);
 
 		val |= ctrl0;
-
-		hinic_hwif_write_reg(eq->hwif, addr, val);
 	}
+	return val;
 }
 
-static void set_ctrl1(struct hinic_eq *eq)
+static void set_ctrl0(struct hinic_eq *eq)
 {
+	u32 val, addr;
+
+	if (eq->type == HINIC_AEQ)
+		addr = HINIC_CSR_AEQ_CTRL_0_ADDR(eq->q_id);
+	else
+		addr = HINIC_CSR_CEQ_CTRL_0_ADDR(eq->q_id);
+
+	val = get_ctrl0_val(eq, addr);
+
+	hinic_hwif_write_reg(eq->hwif, addr, val);
+}
+
+static u32 get_ctrl1_val(struct hinic_eq *eq, u32 addr)
+{
+	u32 page_size_val, elem_size, val, ctrl1;
 	enum hinic_eq_type type = eq->type;
-	u32 page_size_val, elem_size;
-	u32 addr, val, ctrl1;
 
 	if (type == HINIC_AEQ) {
 		/* RMW Ctrl1 */
@@ -491,9 +502,7 @@ static void set_ctrl1(struct hinic_eq *eq)
 			HINIC_AEQ_CTRL_1_SET(page_size_val, PAGE_SIZE);
 
 		val |= ctrl1;
-
-		hinic_hwif_write_reg(eq->hwif, addr, val);
-	} else if (type == HINIC_CEQ) {
+	} else {
 		/* RMW Ctrl1 */
 		addr = HINIC_CSR_CEQ_CTRL_1_ADDR(eq->q_id);
 
@@ -508,19 +517,70 @@ static void set_ctrl1(struct hinic_eq *eq)
 			HINIC_CEQ_CTRL_1_SET(page_size_val, PAGE_SIZE);
 
 		val |= ctrl1;
+	}
+	return val;
+}
 
-		hinic_hwif_write_reg(eq->hwif, addr, val);
+static void set_ctrl1(struct hinic_eq *eq)
+{
+	u32 addr, val;
+
+	if (eq->type == HINIC_AEQ)
+		addr = HINIC_CSR_AEQ_CTRL_1_ADDR(eq->q_id);
+	else
+		addr = HINIC_CSR_CEQ_CTRL_1_ADDR(eq->q_id);
+
+	val = get_ctrl1_val(eq, addr);
+
+	hinic_hwif_write_reg(eq->hwif, addr, val);
+}
+
+static int set_ceq_ctrl_reg(struct hinic_eq *eq)
+{
+	struct hinic_ceq_ctrl_reg ceq_ctrl = {0};
+	struct hinic_hwdev *hwdev = eq->hwdev;
+	u16 out_size = sizeof(ceq_ctrl);
+	u16 in_size = sizeof(ceq_ctrl);
+	struct hinic_pfhwdev *pfhwdev;
+	u32 addr;
+	int err;
+
+	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
+
+	addr = HINIC_CSR_CEQ_CTRL_0_ADDR(eq->q_id);
+	ceq_ctrl.ctrl0 = get_ctrl0_val(eq, addr);
+	addr = HINIC_CSR_CEQ_CTRL_1_ADDR(eq->q_id);
+	ceq_ctrl.ctrl1 = get_ctrl1_val(eq, addr);
+
+	ceq_ctrl.func_id = HINIC_HWIF_FUNC_IDX(hwdev->hwif);
+	ceq_ctrl.q_id = eq->q_id;
+
+	err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM,
+				HINIC_COMM_CMD_CEQ_CTRL_REG_WR_BY_UP,
+				&ceq_ctrl, in_size,
+				&ceq_ctrl, &out_size, HINIC_MGMT_MSG_SYNC);
+	if (err || !out_size || ceq_ctrl.status) {
+		dev_err(&hwdev->hwif->pdev->dev,
+			"Failed to set ceq %d ctrl reg, err: %d status: 0x%x, out_size: 0x%x\n",
+			eq->q_id, err, ceq_ctrl.status, out_size);
+		return -EFAULT;
 	}
+
+	return 0;
 }
 
 /**
  * set_eq_ctrls - setting eq's ctrl registers
  * @eq: the Event Queue for setting
  **/
-static void set_eq_ctrls(struct hinic_eq *eq)
+static int set_eq_ctrls(struct hinic_eq *eq)
 {
+	if (HINIC_IS_VF(eq->hwif) && eq->type == HINIC_CEQ)
+		return set_ceq_ctrl_reg(eq);
+
 	set_ctrl0(eq);
 	set_ctrl1(eq);
+	return 0;
 }
 
 /**
@@ -703,7 +763,12 @@ static int init_eq(struct hinic_eq *eq, struct hinic_hwif *hwif,
 		return -EINVAL;
 	}
 
-	set_eq_ctrls(eq);
+	err = set_eq_ctrls(eq);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to set eq ctrls\n");
+		return err;
+	}
+
 	eq_update_ci(eq, EQ_ARMED);
 
 	err = alloc_eq_pages(eq);
@@ -859,6 +924,7 @@ int hinic_ceqs_init(struct hinic_ceqs *ceqs, struct hinic_hwif *hwif,
 	ceqs->num_ceqs = num_ceqs;
 
 	for (q_id = 0; q_id < num_ceqs; q_id++) {
+		ceqs->ceq[q_id].hwdev = ceqs->hwdev;
 		err = init_eq(&ceqs->ceq[q_id], hwif, HINIC_CEQ, q_id, q_len,
 			      page_size, msix_entries[q_id]);
 		if (err) {
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h
index d35f2068ee0c..74b9ff90640c 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h
@@ -143,8 +143,9 @@ enum hinic_eq_type {
 };
 
 enum hinic_aeq_type {
+	HINIC_MBX_FROM_FUNC = 1,
 	HINIC_MSG_FROM_MGMT_CPU = 2,
-
+	HINIC_MBX_SEND_RSLT = 5,
 	HINIC_MAX_AEQ_EVENTS,
 };
 
@@ -171,7 +172,7 @@ struct hinic_eq_work {
 
 struct hinic_eq {
 	struct hinic_hwif       *hwif;
-
+	struct hinic_hwdev      *hwdev;
 	enum hinic_eq_type      type;
 	int                     q_id;
 	u32                     q_len;
@@ -219,7 +220,7 @@ struct hinic_ceq_cb {
 
 struct hinic_ceqs {
 	struct hinic_hwif       *hwif;
-
+	struct hinic_hwdev		*hwdev;
 	struct hinic_eq         ceq[HINIC_MAX_CEQS];
 	int                     num_ceqs;
 
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_if.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_if.c
index 07bbfbf68577..3fbd2eb80582 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_if.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_if.c
@@ -115,8 +115,12 @@ int hinic_msix_attr_cnt_clear(struct hinic_hwif *hwif, u16 msix_index)
  **/
 void hinic_set_pf_action(struct hinic_hwif *hwif, enum hinic_pf_action action)
 {
-	u32 attr5 = hinic_hwif_read_reg(hwif, HINIC_CSR_FUNC_ATTR5_ADDR);
+	u32 attr5;
 
+	if (HINIC_IS_VF(hwif))
+		return;
+
+	attr5 = hinic_hwif_read_reg(hwif, HINIC_CSR_FUNC_ATTR5_ADDR);
 	attr5 = HINIC_FA5_CLEAR(attr5, PF_ACTION);
 	attr5 |= HINIC_FA5_SET(action, PF_ACTION);
 
@@ -203,7 +207,8 @@ static int hwif_ready(struct hinic_hwif *hwif)
  * @attr0: the first attribute that was read from the hw
  * @attr1: the second attribute that was read from the hw
  **/
-static void set_hwif_attr(struct hinic_hwif *hwif, u32 attr0, u32 attr1)
+static void set_hwif_attr(struct hinic_hwif *hwif, u32 attr0, u32 attr1,
+			  u32 attr2)
 {
 	hwif->attr.func_idx     = HINIC_FA0_GET(attr0, FUNC_IDX);
 	hwif->attr.pf_idx       = HINIC_FA0_GET(attr0, PF_IDX);
@@ -214,6 +219,8 @@ static void set_hwif_attr(struct hinic_hwif *hwif, u32 attr0, u32 attr1)
 	hwif->attr.num_ceqs = BIT(HINIC_FA1_GET(attr1, CEQS_PER_FUNC));
 	hwif->attr.num_irqs = BIT(HINIC_FA1_GET(attr1, IRQS_PER_FUNC));
 	hwif->attr.num_dma_attr = BIT(HINIC_FA1_GET(attr1, DMA_ATTR_PER_FUNC));
+	hwif->attr.global_vf_id_of_pf = HINIC_FA2_GET(attr2,
+						      GLOBAL_VF_ID_OF_PF);
 }
 
 /**
@@ -222,7 +229,7 @@ static void set_hwif_attr(struct hinic_hwif *hwif, u32 attr0, u32 attr1)
  **/
 static void read_hwif_attr(struct hinic_hwif *hwif)
 {
-	u32 addr, attr0, attr1;
+	u32 addr, attr0, attr1, attr2;
 
 	addr   = HINIC_CSR_FUNC_ATTR0_ADDR;
 	attr0  = hinic_hwif_read_reg(hwif, addr);
@@ -230,7 +237,10 @@ static void read_hwif_attr(struct hinic_hwif *hwif)
 	addr   = HINIC_CSR_FUNC_ATTR1_ADDR;
 	attr1  = hinic_hwif_read_reg(hwif, addr);
 
-	set_hwif_attr(hwif, attr0, attr1);
+	addr   = HINIC_CSR_FUNC_ATTR2_ADDR;
+	attr2  = hinic_hwif_read_reg(hwif, addr);
+
+	set_hwif_attr(hwif, attr0, attr1, attr2);
 }
 
 /**
@@ -309,6 +319,34 @@ static void dma_attr_init(struct hinic_hwif *hwif)
 		     HINIC_PCIE_SNOOP, HINIC_PCIE_TPH_DISABLE);
 }
 
+u16 hinic_glb_pf_vf_offset(struct hinic_hwif *hwif)
+{
+	if (!hwif)
+		return 0;
+
+	return hwif->attr.global_vf_id_of_pf;
+}
+
+u16 hinic_global_func_id_hw(struct hinic_hwif *hwif)
+{
+	u32 addr, attr0;
+
+	addr   = HINIC_CSR_FUNC_ATTR0_ADDR;
+	attr0  = hinic_hwif_read_reg(hwif, addr);
+
+	return HINIC_FA0_GET(attr0, FUNC_IDX);
+}
+
+u16 hinic_pf_id_of_vf_hw(struct hinic_hwif *hwif)
+{
+	u32 addr, attr0;
+
+	addr   = HINIC_CSR_FUNC_ATTR0_ADDR;
+	attr0  = hinic_hwif_read_reg(hwif, addr);
+
+	return HINIC_FA0_GET(attr0, PF_IDX);
+}
+
 /**
  * hinic_init_hwif - initialize the hw interface
  * @hwif: the HW interface of a pci function device
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_if.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_if.h
index c7bb9ceca72c..53bb89c1dd26 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_if.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_if.h
@@ -35,6 +35,7 @@
 #define HINIC_FA0_FUNC_IDX_SHIFT                                0
 #define HINIC_FA0_PF_IDX_SHIFT                                  10
 #define HINIC_FA0_PCI_INTF_IDX_SHIFT                            14
+#define HINIC_FA0_VF_IN_PF_SHIFT				16
 /* reserved members - off 16 */
 #define HINIC_FA0_FUNC_TYPE_SHIFT                               24
 
@@ -42,6 +43,7 @@
 #define HINIC_FA0_PF_IDX_MASK                                   0xF
 #define HINIC_FA0_PCI_INTF_IDX_MASK                             0x3
 #define HINIC_FA0_FUNC_TYPE_MASK                                0x1
+#define HINIC_FA0_VF_IN_PF_MASK					0xFF
 
 #define HINIC_FA0_GET(val, member)                              \
 	(((val) >> HINIC_FA0_##member##_SHIFT) & HINIC_FA0_##member##_MASK)
@@ -64,6 +66,12 @@
 #define HINIC_FA1_GET(val, member)                              \
 	(((val) >> HINIC_FA1_##member##_SHIFT) & HINIC_FA1_##member##_MASK)
 
+#define HINIC_FA2_GLOBAL_VF_ID_OF_PF_SHIFT	16
+#define HINIC_FA2_GLOBAL_VF_ID_OF_PF_MASK	0x3FF
+
+#define HINIC_FA2_GET(val, member)				\
+	(((val) >> HINIC_FA2_##member##_SHIFT) & HINIC_FA2_##member##_MASK)
+
 #define HINIC_FA4_OUTBOUND_STATE_SHIFT                          0
 #define HINIC_FA4_DB_STATE_SHIFT                                1
 
@@ -140,6 +148,7 @@
 #define HINIC_HWIF_PPF_IDX(hwif)        ((hwif)->attr.ppf_idx)
 
 #define HINIC_FUNC_TYPE(hwif)           ((hwif)->attr.func_type)
+#define HINIC_IS_VF(hwif)               (HINIC_FUNC_TYPE(hwif) == HINIC_VF)
 #define HINIC_IS_PF(hwif)               (HINIC_FUNC_TYPE(hwif) == HINIC_PF)
 #define HINIC_IS_PPF(hwif)              (HINIC_FUNC_TYPE(hwif) == HINIC_PPF)
 
@@ -173,6 +182,7 @@ enum hinic_pcie_tph {
 
 enum hinic_func_type {
 	HINIC_PF        = 0,
+	HINIC_VF	    = 1,
 	HINIC_PPF       = 2,
 };
 
@@ -223,6 +233,8 @@ struct hinic_func_attr {
 	u8                      num_ceqs;
 
 	u8                      num_dma_attr;
+
+	u16						global_vf_id_of_pf;
 };
 
 struct hinic_hwif {
@@ -271,6 +283,12 @@ enum hinic_db_state hinic_db_state_get(struct hinic_hwif *hwif);
 void hinic_db_state_set(struct hinic_hwif *hwif,
 			enum hinic_db_state db_state);
 
+u16 hinic_glb_pf_vf_offset(struct hinic_hwif *hwif);
+
+u16 hinic_global_func_id_hw(struct hinic_hwif *hwif);
+
+u16 hinic_pf_id_of_vf_hw(struct hinic_hwif *hwif);
+
 int hinic_init_hwif(struct hinic_hwif *hwif, struct pci_dev *pdev);
 
 void hinic_free_hwif(struct hinic_hwif *hwif);
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c
index d66f86fa3f46..a4581c988a63 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
 
+#include "hinic_hw_dev.h"
 #include "hinic_hw_if.h"
 #include "hinic_hw_eqs.h"
 #include "hinic_hw_wqe.h"
@@ -34,6 +35,8 @@
 #define DB_IDX(db, db_base)             \
 	(((unsigned long)(db) - (unsigned long)(db_base)) / HINIC_DB_PAGE_SIZE)
 
+#define HINIC_PAGE_SIZE_HW(pg_size)	((u8)ilog2((u32)((pg_size) >> 12)))
+
 enum io_cmd {
 	IO_CMD_MODIFY_QUEUE_CTXT = 0,
 	IO_CMD_CLEAN_QUEUE_CTXT,
@@ -484,6 +487,33 @@ void hinic_io_destroy_qps(struct hinic_func_to_io *func_to_io, int num_qps)
 	devm_kfree(&pdev->dev, func_to_io->qps);
 }
 
+int hinic_set_wq_page_size(struct hinic_hwdev *hwdev, u16 func_idx,
+			   u32 page_size)
+{
+	struct hinic_wq_page_size page_size_info = {0};
+	u16 out_size = sizeof(page_size_info);
+	struct hinic_pfhwdev *pfhwdev;
+	int err;
+
+	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
+
+	page_size_info.func_idx = func_idx;
+	page_size_info.ppf_idx = HINIC_HWIF_PPF_IDX(hwdev->hwif);
+	page_size_info.page_size = HINIC_PAGE_SIZE_HW(page_size);
+
+	err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM,
+				HINIC_COMM_CMD_PAGESIZE_SET, &page_size_info,
+				sizeof(page_size_info), &page_size_info,
+				&out_size, HINIC_MGMT_MSG_SYNC);
+	if (err || !out_size || page_size_info.status) {
+		dev_err(&hwdev->hwif->pdev->dev, "Failed to set wq page size, err: %d, status: 0x%x, out_size: 0x%0x\n",
+			err, page_size_info.status, out_size);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
 /**
  * hinic_io_init - Initialize the IO components
  * @func_to_io: func to io channel that holds the IO components
@@ -506,6 +536,7 @@ int hinic_io_init(struct hinic_func_to_io *func_to_io,
 	func_to_io->hwif = hwif;
 	func_to_io->qps = NULL;
 	func_to_io->max_qps = max_qps;
+	func_to_io->ceqs.hwdev = func_to_io->hwdev;
 
 	err = hinic_ceqs_init(&func_to_io->ceqs, hwif, num_ceqs,
 			      HINIC_DEFAULT_CEQ_LEN, HINIC_EQ_PAGE_SIZE,
@@ -541,6 +572,14 @@ int hinic_io_init(struct hinic_func_to_io *func_to_io,
 		func_to_io->cmdq_db_area[cmdq] = db_area;
 	}
 
+	err = hinic_set_wq_page_size(func_to_io->hwdev,
+				     HINIC_HWIF_FUNC_IDX(hwif),
+				     HINIC_DEFAULT_WQ_PAGE_SIZE);
+	if (err) {
+		dev_err(&func_to_io->hwif->pdev->dev, "Failed to set wq page size\n");
+		goto init_wq_pg_size_err;
+	}
+
 	err = hinic_init_cmdqs(&func_to_io->cmdqs, hwif,
 			       func_to_io->cmdq_db_area);
 	if (err) {
@@ -551,6 +590,11 @@ int hinic_io_init(struct hinic_func_to_io *func_to_io,
 	return 0;
 
 err_init_cmdqs:
+	if (!HINIC_IS_VF(func_to_io->hwif))
+		hinic_set_wq_page_size(func_to_io->hwdev,
+				       HINIC_HWIF_FUNC_IDX(hwif),
+				       HINIC_HW_WQ_PAGE_SIZE);
+init_wq_pg_size_err:
 err_db_area:
 	for (type = HINIC_CMDQ_SYNC; type < cmdq; type++)
 		return_db_area(func_to_io, func_to_io->cmdq_db_area[type]);
@@ -575,6 +619,11 @@ void hinic_io_free(struct hinic_func_to_io *func_to_io)
 
 	hinic_free_cmdqs(&func_to_io->cmdqs);
 
+	if (!HINIC_IS_VF(func_to_io->hwif))
+		hinic_set_wq_page_size(func_to_io->hwdev,
+				       HINIC_HWIF_FUNC_IDX(func_to_io->hwif),
+				       HINIC_HW_WQ_PAGE_SIZE);
+
 	for (cmdq = HINIC_CMDQ_SYNC; cmdq < HINIC_MAX_CMDQ_TYPES; cmdq++)
 		return_db_area(func_to_io, func_to_io->cmdq_db_area[cmdq]);
 
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_io.h
index cac2b722e7dc..28c0594f636d 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_io.h
@@ -20,6 +20,8 @@
 
 #define HINIC_DB_PAGE_SIZE      SZ_4K
 #define HINIC_DB_SIZE           SZ_4M
+#define HINIC_HW_WQ_PAGE_SIZE	SZ_4K
+#define HINIC_DEFAULT_WQ_PAGE_SIZE SZ_256K
 
 #define HINIC_DB_MAX_AREAS      (HINIC_DB_SIZE / HINIC_DB_PAGE_SIZE)
 
@@ -47,7 +49,7 @@ struct hinic_free_db_area {
 
 struct hinic_func_to_io {
 	struct hinic_hwif       *hwif;
-
+	struct hinic_hwdev      *hwdev;
 	struct hinic_ceqs       ceqs;
 
 	struct hinic_wqs        wqs;
@@ -69,8 +71,27 @@ struct hinic_func_to_io {
 	void __iomem                    *cmdq_db_area[HINIC_MAX_CMDQ_TYPES];
 
 	struct hinic_cmdqs              cmdqs;
+
+	u16			max_vfs;
+	struct vf_data_storage	*vf_infos;
+	u8			link_status;
 };
 
+struct hinic_wq_page_size {
+	u8	status;
+	u8	version;
+	u8	rsvd0[6];
+
+	u16	func_idx;
+	u8	ppf_idx;
+	u8	page_size;
+
+	u32	rsvd1;
+};
+
+int hinic_set_wq_page_size(struct hinic_hwdev *hwdev, u16 func_idx,
+			   u32 page_size);
+
 int hinic_io_create_qps(struct hinic_func_to_io *func_to_io,
 			u16 base_qpn, int num_qps,
 			struct msix_entry *sq_msix_entries,
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c
new file mode 100644
index 000000000000..f8626dfd192e
--- /dev/null
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c
@@ -0,0 +1,1213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Huawei HiNIC PCI Express Linux driver
+ * Copyright(c) 2017 Huawei Technologies Co., Ltd
+ */
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/completion.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include "hinic_hw_if.h"
+#include "hinic_hw_mgmt.h"
+#include "hinic_hw_csr.h"
+#include "hinic_hw_dev.h"
+#include "hinic_hw_mbox.h"
+
+#define HINIC_MBOX_INT_DST_FUNC_SHIFT				0
+#define HINIC_MBOX_INT_DST_AEQN_SHIFT				10
+#define HINIC_MBOX_INT_SRC_RESP_AEQN_SHIFT			12
+#define HINIC_MBOX_INT_STAT_DMA_SHIFT				14
+/* The size of data to be sended (unit of 4 bytes) */
+#define HINIC_MBOX_INT_TX_SIZE_SHIFT				20
+/* SO_RO(strong order, relax order) */
+#define HINIC_MBOX_INT_STAT_DMA_SO_RO_SHIFT			25
+#define HINIC_MBOX_INT_WB_EN_SHIFT				28
+
+#define HINIC_MBOX_INT_DST_FUNC_MASK				0x3FF
+#define HINIC_MBOX_INT_DST_AEQN_MASK				0x3
+#define HINIC_MBOX_INT_SRC_RESP_AEQN_MASK			0x3
+#define HINIC_MBOX_INT_STAT_DMA_MASK				0x3F
+#define HINIC_MBOX_INT_TX_SIZE_MASK				0x1F
+#define HINIC_MBOX_INT_STAT_DMA_SO_RO_MASK			0x3
+#define HINIC_MBOX_INT_WB_EN_MASK				0x1
+
+#define HINIC_MBOX_INT_SET(val, field)	\
+			(((val) & HINIC_MBOX_INT_##field##_MASK) << \
+			HINIC_MBOX_INT_##field##_SHIFT)
+
+enum hinic_mbox_tx_status {
+	TX_NOT_DONE = 1,
+};
+
+#define HINIC_MBOX_CTRL_TRIGGER_AEQE_SHIFT			0
+
+/* specifies the issue request for the message data.
+ * 0 - Tx request is done;
+ * 1 - Tx request is in process.
+ */
+#define HINIC_MBOX_CTRL_TX_STATUS_SHIFT				1
+
+#define HINIC_MBOX_CTRL_TRIGGER_AEQE_MASK			0x1
+#define HINIC_MBOX_CTRL_TX_STATUS_MASK				0x1
+
+#define HINIC_MBOX_CTRL_SET(val, field)	\
+			(((val) & HINIC_MBOX_CTRL_##field##_MASK) << \
+			HINIC_MBOX_CTRL_##field##_SHIFT)
+
+#define HINIC_MBOX_HEADER_MSG_LEN_SHIFT				0
+#define HINIC_MBOX_HEADER_MODULE_SHIFT				11
+#define HINIC_MBOX_HEADER_SEG_LEN_SHIFT				16
+#define HINIC_MBOX_HEADER_NO_ACK_SHIFT				22
+#define HINIC_MBOX_HEADER_SEQID_SHIFT				24
+#define HINIC_MBOX_HEADER_LAST_SHIFT				30
+
+/* specifies the mailbox message direction
+ * 0 - send
+ * 1 - receive
+ */
+#define HINIC_MBOX_HEADER_DIRECTION_SHIFT			31
+#define HINIC_MBOX_HEADER_CMD_SHIFT				32
+#define HINIC_MBOX_HEADER_MSG_ID_SHIFT				40
+#define HINIC_MBOX_HEADER_STATUS_SHIFT				48
+#define HINIC_MBOX_HEADER_SRC_GLB_FUNC_IDX_SHIFT		54
+
+#define HINIC_MBOX_HEADER_MSG_LEN_MASK				0x7FF
+#define HINIC_MBOX_HEADER_MODULE_MASK				0x1F
+#define HINIC_MBOX_HEADER_SEG_LEN_MASK				0x3F
+#define HINIC_MBOX_HEADER_NO_ACK_MASK				0x1
+#define HINIC_MBOX_HEADER_SEQID_MASK				0x3F
+#define HINIC_MBOX_HEADER_LAST_MASK				0x1
+#define HINIC_MBOX_HEADER_DIRECTION_MASK			0x1
+#define HINIC_MBOX_HEADER_CMD_MASK				0xFF
+#define HINIC_MBOX_HEADER_MSG_ID_MASK				0xFF
+#define HINIC_MBOX_HEADER_STATUS_MASK				0x3F
+#define HINIC_MBOX_HEADER_SRC_GLB_FUNC_IDX_MASK			0x3FF
+
+#define HINIC_MBOX_HEADER_GET(val, field)	\
+			(((val) >> HINIC_MBOX_HEADER_##field##_SHIFT) & \
+			HINIC_MBOX_HEADER_##field##_MASK)
+#define HINIC_MBOX_HEADER_SET(val, field)	\
+			((u64)((val) & HINIC_MBOX_HEADER_##field##_MASK) << \
+			HINIC_MBOX_HEADER_##field##_SHIFT)
+
+#define MBOX_SEGLEN_MASK			\
+		HINIC_MBOX_HEADER_SET(HINIC_MBOX_HEADER_SEG_LEN_MASK, SEG_LEN)
+
+#define HINIC_MBOX_SEG_LEN			48
+#define HINIC_MBOX_COMP_TIME			8000U
+#define MBOX_MSG_POLLING_TIMEOUT		8000
+
+#define HINIC_MBOX_DATA_SIZE			2040
+
+#define MBOX_MAX_BUF_SZ				2048UL
+#define MBOX_HEADER_SZ				8
+
+#define MBOX_INFO_SZ				4
+
+/* MBOX size is 64B, 8B for mbox_header, 4B reserved */
+#define MBOX_SEG_LEN				48
+#define MBOX_SEG_LEN_ALIGN			4
+#define MBOX_WB_STATUS_LEN			16UL
+
+/* mbox write back status is 16B, only first 4B is used */
+#define MBOX_WB_STATUS_ERRCODE_MASK		0xFFFF
+#define MBOX_WB_STATUS_MASK			0xFF
+#define MBOX_WB_ERROR_CODE_MASK			0xFF00
+#define MBOX_WB_STATUS_FINISHED_SUCCESS		0xFF
+#define MBOX_WB_STATUS_FINISHED_WITH_ERR	0xFE
+#define MBOX_WB_STATUS_NOT_FINISHED		0x00
+
+#define MBOX_STATUS_FINISHED(wb)	\
+	(((wb) & MBOX_WB_STATUS_MASK) != MBOX_WB_STATUS_NOT_FINISHED)
+#define MBOX_STATUS_SUCCESS(wb)		\
+	(((wb) & MBOX_WB_STATUS_MASK) == MBOX_WB_STATUS_FINISHED_SUCCESS)
+#define MBOX_STATUS_ERRCODE(wb)		\
+	((wb) & MBOX_WB_ERROR_CODE_MASK)
+
+#define SEQ_ID_START_VAL			0
+#define SEQ_ID_MAX_VAL				42
+
+#define DST_AEQ_IDX_DEFAULT_VAL			0
+#define SRC_AEQ_IDX_DEFAULT_VAL			0
+#define NO_DMA_ATTRIBUTE_VAL			0
+
+#define HINIC_MGMT_RSP_AEQN			0
+#define HINIC_MBOX_RSP_AEQN			2
+#define HINIC_MBOX_RECV_AEQN			0
+
+#define MBOX_MSG_NO_DATA_LEN			1
+
+#define MBOX_BODY_FROM_HDR(header)	((u8 *)(header) + MBOX_HEADER_SZ)
+#define MBOX_AREA(hwif)			\
+	((hwif)->cfg_regs_bar + HINIC_FUNC_CSR_MAILBOX_DATA_OFF)
+
+#define IS_PF_OR_PPF_SRC(src_func_idx)	((src_func_idx) < HINIC_MAX_PF_FUNCS)
+
+#define MBOX_RESPONSE_ERROR		0x1
+#define MBOX_MSG_ID_MASK		0xFF
+#define MBOX_MSG_ID(func_to_func)	((func_to_func)->send_msg_id)
+#define MBOX_MSG_ID_INC(func_to_func_mbox) (MBOX_MSG_ID(func_to_func_mbox) = \
+			(MBOX_MSG_ID(func_to_func_mbox) + 1) & MBOX_MSG_ID_MASK)
+
+#define FUNC_ID_OFF_SET_8B		8
+#define FUNC_ID_OFF_SET_10B		10
+
+/* max message counter wait to process for one function */
+#define HINIC_MAX_MSG_CNT_TO_PROCESS	10
+
+#define HINIC_QUEUE_MIN_DEPTH		6
+#define HINIC_QUEUE_MAX_DEPTH		12
+#define HINIC_MAX_RX_BUFFER_SIZE		15
+
+enum hinic_hwif_direction_type {
+	HINIC_HWIF_DIRECT_SEND	= 0,
+	HINIC_HWIF_RESPONSE	= 1,
+};
+
+enum mbox_send_mod {
+	MBOX_SEND_MSG_INT,
+};
+
+enum mbox_seg_type {
+	NOT_LAST_SEG,
+	LAST_SEG,
+};
+
+enum mbox_ordering_type {
+	STRONG_ORDER,
+};
+
+enum mbox_write_back_type {
+	WRITE_BACK = 1,
+};
+
+enum mbox_aeq_trig_type {
+	NOT_TRIGGER,
+	TRIGGER,
+};
+
+/**
+ * hinic_register_pf_mbox_cb - register mbox callback for pf
+ * @hwdev: the pointer to hw device
+ * @mod:	specific mod that the callback will handle
+ * @callback:	callback function
+ * Return: 0 - success, negative - failure
+ */
+int hinic_register_pf_mbox_cb(struct hinic_hwdev *hwdev,
+			      enum hinic_mod_type mod,
+			      hinic_pf_mbox_cb callback)
+{
+	struct hinic_mbox_func_to_func *func_to_func = hwdev->func_to_func;
+
+	if (mod >= HINIC_MOD_MAX)
+		return -EFAULT;
+
+	func_to_func->pf_mbox_cb[mod] = callback;
+
+	set_bit(HINIC_PF_MBOX_CB_REG, &func_to_func->pf_mbox_cb_state[mod]);
+
+	return 0;
+}
+
+/**
+ * hinic_register_vf_mbox_cb - register mbox callback for vf
+ * @hwdev: the pointer to hw device
+ * @mod:	specific mod that the callback will handle
+ * @callback:	callback function
+ * Return: 0 - success, negative - failure
+ */
+int hinic_register_vf_mbox_cb(struct hinic_hwdev *hwdev,
+			      enum hinic_mod_type mod,
+			      hinic_vf_mbox_cb callback)
+{
+	struct hinic_mbox_func_to_func *func_to_func = hwdev->func_to_func;
+
+	if (mod >= HINIC_MOD_MAX)
+		return -EFAULT;
+
+	func_to_func->vf_mbox_cb[mod] = callback;
+
+	set_bit(HINIC_VF_MBOX_CB_REG, &func_to_func->vf_mbox_cb_state[mod]);
+
+	return 0;
+}
+
+/**
+ * hinic_unregister_pf_mbox_cb - unregister the mbox callback for pf
+ * @hwdev:	the pointer to hw device
+ * @mod:	specific mod that the callback will handle
+ */
+void hinic_unregister_pf_mbox_cb(struct hinic_hwdev *hwdev,
+				 enum hinic_mod_type mod)
+{
+	struct hinic_mbox_func_to_func *func_to_func = hwdev->func_to_func;
+
+	clear_bit(HINIC_PF_MBOX_CB_REG, &func_to_func->pf_mbox_cb_state[mod]);
+
+	while (test_bit(HINIC_PF_MBOX_CB_RUNNING,
+			&func_to_func->pf_mbox_cb_state[mod]))
+		usleep_range(900, 1000);
+
+	func_to_func->pf_mbox_cb[mod] = NULL;
+}
+
+/**
+ * hinic_unregister_vf_mbox_cb - unregister the mbox callback for vf
+ * @hwdev:	the pointer to hw device
+ * @mod:	specific mod that the callback will handle
+ */
+void hinic_unregister_vf_mbox_cb(struct hinic_hwdev *hwdev,
+				 enum hinic_mod_type mod)
+{
+	struct hinic_mbox_func_to_func *func_to_func = hwdev->func_to_func;
+
+	clear_bit(HINIC_VF_MBOX_CB_REG, &func_to_func->vf_mbox_cb_state[mod]);
+
+	while (test_bit(HINIC_VF_MBOX_CB_RUNNING,
+			&func_to_func->vf_mbox_cb_state[mod]))
+		usleep_range(900, 1000);
+
+	func_to_func->vf_mbox_cb[mod] = NULL;
+}
+
+static int recv_vf_mbox_handler(struct hinic_mbox_func_to_func *func_to_func,
+				struct hinic_recv_mbox *recv_mbox,
+				void *buf_out, u16 *out_size)
+{
+	hinic_vf_mbox_cb cb;
+	int ret = 0;
+
+	if (recv_mbox->mod >= HINIC_MOD_MAX) {
+		dev_err(&func_to_func->hwif->pdev->dev, "Receive illegal mbox message, mod = %d\n",
+			recv_mbox->mod);
+		return -EINVAL;
+	}
+
+	set_bit(HINIC_VF_MBOX_CB_RUNNING,
+		&func_to_func->vf_mbox_cb_state[recv_mbox->mod]);
+
+	cb = func_to_func->vf_mbox_cb[recv_mbox->mod];
+	if (cb && test_bit(HINIC_VF_MBOX_CB_REG,
+			   &func_to_func->vf_mbox_cb_state[recv_mbox->mod])) {
+		cb(func_to_func->hwdev, recv_mbox->cmd, recv_mbox->mbox,
+		   recv_mbox->mbox_len, buf_out, out_size);
+	} else {
+		dev_err(&func_to_func->hwif->pdev->dev, "VF mbox cb is not registered\n");
+		ret = -EINVAL;
+	}
+
+	clear_bit(HINIC_VF_MBOX_CB_RUNNING,
+		  &func_to_func->vf_mbox_cb_state[recv_mbox->mod]);
+
+	return ret;
+}
+
+static int
+recv_pf_from_vf_mbox_handler(struct hinic_mbox_func_to_func *func_to_func,
+			     struct hinic_recv_mbox *recv_mbox,
+			     u16 src_func_idx, void *buf_out,
+			     u16 *out_size)
+{
+	hinic_pf_mbox_cb cb;
+	u16 vf_id = 0;
+	int ret;
+
+	if (recv_mbox->mod >= HINIC_MOD_MAX) {
+		dev_err(&func_to_func->hwif->pdev->dev, "Receive illegal mbox message, mod = %d\n",
+			recv_mbox->mod);
+		return -EINVAL;
+	}
+
+	set_bit(HINIC_PF_MBOX_CB_RUNNING,
+		&func_to_func->pf_mbox_cb_state[recv_mbox->mod]);
+
+	cb = func_to_func->pf_mbox_cb[recv_mbox->mod];
+	if (cb && test_bit(HINIC_PF_MBOX_CB_REG,
+			   &func_to_func->pf_mbox_cb_state[recv_mbox->mod])) {
+		vf_id = src_func_idx -
+			hinic_glb_pf_vf_offset(func_to_func->hwif);
+		ret = cb(func_to_func->hwdev, vf_id, recv_mbox->cmd,
+			 recv_mbox->mbox, recv_mbox->mbox_len,
+			 buf_out, out_size);
+	} else {
+		dev_err(&func_to_func->hwif->pdev->dev, "PF mbox mod(0x%x) cb is not registered\n",
+			recv_mbox->mod);
+		ret = -EINVAL;
+	}
+
+	clear_bit(HINIC_PF_MBOX_CB_RUNNING,
+		  &func_to_func->pf_mbox_cb_state[recv_mbox->mod]);
+
+	return ret;
+}
+
+static bool check_mbox_seq_id_and_seg_len(struct hinic_recv_mbox *recv_mbox,
+					  u8 seq_id, u8 seg_len)
+{
+	if (seq_id > SEQ_ID_MAX_VAL || seg_len > MBOX_SEG_LEN)
+		return false;
+
+	if (seq_id == 0) {
+		recv_mbox->seq_id = seq_id;
+	} else {
+		if (seq_id != recv_mbox->seq_id + 1)
+			return false;
+
+		recv_mbox->seq_id = seq_id;
+	}
+
+	return true;
+}
+
+static void resp_mbox_handler(struct hinic_mbox_func_to_func *func_to_func,
+			      struct hinic_recv_mbox *recv_mbox)
+{
+	spin_lock(&func_to_func->mbox_lock);
+	if (recv_mbox->msg_info.msg_id == func_to_func->send_msg_id &&
+	    func_to_func->event_flag == EVENT_START)
+		complete(&recv_mbox->recv_done);
+	else
+		dev_err(&func_to_func->hwif->pdev->dev,
+			"Mbox response timeout, current send msg id(0x%x), recv msg id(0x%x), status(0x%x)\n",
+			func_to_func->send_msg_id, recv_mbox->msg_info.msg_id,
+			recv_mbox->msg_info.status);
+	spin_unlock(&func_to_func->mbox_lock);
+}
+
+static void recv_func_mbox_handler(struct hinic_mbox_func_to_func *func_to_func,
+				   struct hinic_recv_mbox *recv_mbox,
+				   u16 src_func_idx);
+
+static void recv_func_mbox_work_handler(struct work_struct *work)
+{
+	struct hinic_mbox_work *mbox_work =
+			container_of(work, struct hinic_mbox_work, work);
+	struct hinic_recv_mbox *recv_mbox;
+
+	recv_func_mbox_handler(mbox_work->func_to_func, mbox_work->recv_mbox,
+			       mbox_work->src_func_idx);
+
+	recv_mbox =
+		&mbox_work->func_to_func->mbox_send[mbox_work->src_func_idx];
+
+	atomic_dec(&recv_mbox->msg_cnt);
+
+	kfree(mbox_work);
+}
+
+static void recv_mbox_handler(struct hinic_mbox_func_to_func *func_to_func,
+			      void *header, struct hinic_recv_mbox *recv_mbox)
+{
+	void *mbox_body = MBOX_BODY_FROM_HDR(header);
+	struct hinic_recv_mbox *rcv_mbox_temp = NULL;
+	u64 mbox_header = *((u64 *)header);
+	struct hinic_mbox_work *mbox_work;
+	u8 seq_id, seg_len;
+	u16 src_func_idx;
+	int pos;
+
+	seq_id = HINIC_MBOX_HEADER_GET(mbox_header, SEQID);
+	seg_len = HINIC_MBOX_HEADER_GET(mbox_header, SEG_LEN);
+	src_func_idx = HINIC_MBOX_HEADER_GET(mbox_header, SRC_GLB_FUNC_IDX);
+
+	if (!check_mbox_seq_id_and_seg_len(recv_mbox, seq_id, seg_len)) {
+		dev_err(&func_to_func->hwif->pdev->dev,
+			"Mailbox sequence and segment check fail, src func id: 0x%x, front id: 0x%x, current id: 0x%x, seg len: 0x%x\n",
+			src_func_idx, recv_mbox->seq_id, seq_id, seg_len);
+		recv_mbox->seq_id = SEQ_ID_MAX_VAL;
+		return;
+	}
+
+	pos = seq_id * MBOX_SEG_LEN;
+	memcpy((u8 *)recv_mbox->mbox + pos, mbox_body,
+	       HINIC_MBOX_HEADER_GET(mbox_header, SEG_LEN));
+
+	if (!HINIC_MBOX_HEADER_GET(mbox_header, LAST))
+		return;
+
+	recv_mbox->cmd = HINIC_MBOX_HEADER_GET(mbox_header, CMD);
+	recv_mbox->mod = HINIC_MBOX_HEADER_GET(mbox_header, MODULE);
+	recv_mbox->mbox_len = HINIC_MBOX_HEADER_GET(mbox_header, MSG_LEN);
+	recv_mbox->ack_type = HINIC_MBOX_HEADER_GET(mbox_header, NO_ACK);
+	recv_mbox->msg_info.msg_id = HINIC_MBOX_HEADER_GET(mbox_header, MSG_ID);
+	recv_mbox->msg_info.status = HINIC_MBOX_HEADER_GET(mbox_header, STATUS);
+	recv_mbox->seq_id = SEQ_ID_MAX_VAL;
+
+	if (HINIC_MBOX_HEADER_GET(mbox_header, DIRECTION) ==
+	    HINIC_HWIF_RESPONSE) {
+		resp_mbox_handler(func_to_func, recv_mbox);
+		return;
+	}
+
+	if (atomic_read(&recv_mbox->msg_cnt) > HINIC_MAX_MSG_CNT_TO_PROCESS) {
+		dev_warn(&func_to_func->hwif->pdev->dev,
+			 "This function(%u) have %d message wait to process,can't add to work queue\n",
+			 src_func_idx, atomic_read(&recv_mbox->msg_cnt));
+		return;
+	}
+
+	rcv_mbox_temp = kzalloc(sizeof(*rcv_mbox_temp), GFP_KERNEL);
+	if (!rcv_mbox_temp)
+		return;
+
+	memcpy(rcv_mbox_temp, recv_mbox, sizeof(*rcv_mbox_temp));
+
+	rcv_mbox_temp->mbox = kzalloc(MBOX_MAX_BUF_SZ, GFP_KERNEL);
+	if (!rcv_mbox_temp->mbox)
+		goto err_alloc_rcv_mbox_msg;
+
+	memcpy(rcv_mbox_temp->mbox, recv_mbox->mbox, MBOX_MAX_BUF_SZ);
+
+	rcv_mbox_temp->buf_out = kzalloc(MBOX_MAX_BUF_SZ, GFP_KERNEL);
+	if (!rcv_mbox_temp->buf_out)
+		goto err_alloc_rcv_mbox_buf;
+
+	mbox_work = kzalloc(sizeof(*mbox_work), GFP_KERNEL);
+	if (!mbox_work)
+		goto err_alloc_mbox_work;
+
+	mbox_work->func_to_func = func_to_func;
+	mbox_work->recv_mbox = rcv_mbox_temp;
+	mbox_work->src_func_idx = src_func_idx;
+
+	atomic_inc(&recv_mbox->msg_cnt);
+	INIT_WORK(&mbox_work->work, recv_func_mbox_work_handler);
+	queue_work(func_to_func->workq, &mbox_work->work);
+
+	return;
+
+err_alloc_mbox_work:
+	kfree(rcv_mbox_temp->buf_out);
+
+err_alloc_rcv_mbox_buf:
+	kfree(rcv_mbox_temp->mbox);
+
+err_alloc_rcv_mbox_msg:
+	kfree(rcv_mbox_temp);
+}
+
+void hinic_mbox_func_aeqe_handler(void *handle, void *header, u8 size)
+{
+	struct hinic_mbox_func_to_func *func_to_func;
+	u64 mbox_header = *((u64 *)header);
+	struct hinic_recv_mbox *recv_mbox;
+	u64 src, dir;
+
+	func_to_func = ((struct hinic_hwdev *)handle)->func_to_func;
+
+	dir = HINIC_MBOX_HEADER_GET(mbox_header, DIRECTION);
+	src = HINIC_MBOX_HEADER_GET(mbox_header, SRC_GLB_FUNC_IDX);
+
+	if (src >= HINIC_MAX_FUNCTIONS) {
+		dev_err(&func_to_func->hwif->pdev->dev,
+			"Mailbox source function id:%u is invalid\n", (u32)src);
+		return;
+	}
+
+	recv_mbox = (dir == HINIC_HWIF_DIRECT_SEND) ?
+		    &func_to_func->mbox_send[src] :
+		    &func_to_func->mbox_resp[src];
+
+	recv_mbox_handler(func_to_func, (u64 *)header, recv_mbox);
+}
+
+void hinic_mbox_self_aeqe_handler(void *handle, void *header, u8 size)
+{
+	struct hinic_mbox_func_to_func *func_to_func;
+	struct hinic_send_mbox *send_mbox;
+
+	func_to_func = ((struct hinic_hwdev *)handle)->func_to_func;
+	send_mbox = &func_to_func->send_mbox;
+
+	complete(&send_mbox->send_done);
+}
+
+static void clear_mbox_status(struct hinic_send_mbox *mbox)
+{
+	*mbox->wb_status = 0;
+
+	/* clear mailbox write back status */
+	wmb();
+}
+
+static void mbox_copy_header(struct hinic_hwdev *hwdev,
+			     struct hinic_send_mbox *mbox, u64 *header)
+{
+	u32 i, idx_max = MBOX_HEADER_SZ / sizeof(u32);
+	u32 *data = (u32 *)header;
+
+	for (i = 0; i < idx_max; i++)
+		__raw_writel(*(data + i), mbox->data + i * sizeof(u32));
+}
+
+static void mbox_copy_send_data(struct hinic_hwdev *hwdev,
+				struct hinic_send_mbox *mbox, void *seg,
+				u16 seg_len)
+{
+	u8 mbox_max_buf[MBOX_SEG_LEN] = {0};
+	u32 data_len, chk_sz = sizeof(u32);
+	u32 *data = seg;
+	u32 i, idx_max;
+
+	/* The mbox message should be aligned in 4 bytes. */
+	if (seg_len % chk_sz) {
+		memcpy(mbox_max_buf, seg, seg_len);
+		data = (u32 *)mbox_max_buf;
+	}
+
+	data_len = seg_len;
+	idx_max = ALIGN(data_len, chk_sz) / chk_sz;
+
+	for (i = 0; i < idx_max; i++)
+		__raw_writel(*(data + i),
+			     mbox->data + MBOX_HEADER_SZ + i * sizeof(u32));
+}
+
+static void write_mbox_msg_attr(struct hinic_mbox_func_to_func *func_to_func,
+				u16 dst_func, u16 dst_aeqn, u16 seg_len,
+				int poll)
+{
+	u16 rsp_aeq = (dst_aeqn == 0) ? 0 : HINIC_MBOX_RSP_AEQN;
+	u32 mbox_int, mbox_ctrl;
+
+	mbox_int = HINIC_MBOX_INT_SET(dst_func, DST_FUNC) |
+		   HINIC_MBOX_INT_SET(dst_aeqn, DST_AEQN) |
+		   HINIC_MBOX_INT_SET(rsp_aeq, SRC_RESP_AEQN) |
+		   HINIC_MBOX_INT_SET(NO_DMA_ATTRIBUTE_VAL, STAT_DMA) |
+		   HINIC_MBOX_INT_SET(ALIGN(MBOX_SEG_LEN + MBOX_HEADER_SZ +
+				      MBOX_INFO_SZ, MBOX_SEG_LEN_ALIGN) >> 2,
+				      TX_SIZE) |
+		   HINIC_MBOX_INT_SET(STRONG_ORDER, STAT_DMA_SO_RO) |
+		   HINIC_MBOX_INT_SET(WRITE_BACK, WB_EN);
+
+	hinic_hwif_write_reg(func_to_func->hwif,
+			     HINIC_FUNC_CSR_MAILBOX_INT_OFFSET_OFF, mbox_int);
+
+	wmb(); /* writing the mbox int attributes */
+	mbox_ctrl = HINIC_MBOX_CTRL_SET(TX_NOT_DONE, TX_STATUS);
+
+	if (poll)
+		mbox_ctrl |= HINIC_MBOX_CTRL_SET(NOT_TRIGGER, TRIGGER_AEQE);
+	else
+		mbox_ctrl |= HINIC_MBOX_CTRL_SET(TRIGGER, TRIGGER_AEQE);
+
+	hinic_hwif_write_reg(func_to_func->hwif,
+			     HINIC_FUNC_CSR_MAILBOX_CONTROL_OFF, mbox_ctrl);
+}
+
+void dump_mox_reg(struct hinic_hwdev *hwdev)
+{
+	u32 val;
+
+	val = hinic_hwif_read_reg(hwdev->hwif,
+				  HINIC_FUNC_CSR_MAILBOX_CONTROL_OFF);
+	dev_err(&hwdev->hwif->pdev->dev, "Mailbox control reg: 0x%x\n", val);
+
+	val = hinic_hwif_read_reg(hwdev->hwif,
+				  HINIC_FUNC_CSR_MAILBOX_INT_OFFSET_OFF);
+	dev_err(&hwdev->hwif->pdev->dev, "Mailbox interrupt offset: 0x%x\n",
+		val);
+}
+
+static u16 get_mbox_status(struct hinic_send_mbox *mbox)
+{
+	/* write back is 16B, but only use first 4B */
+	u64 wb_val = be64_to_cpu(*mbox->wb_status);
+
+	rmb(); /* verify reading before check */
+
+	return (u16)(wb_val & MBOX_WB_STATUS_ERRCODE_MASK);
+}
+
+static int
+wait_for_mbox_seg_completion(struct hinic_mbox_func_to_func *func_to_func,
+			     int poll, u16 *wb_status)
+{
+	struct hinic_send_mbox *send_mbox = &func_to_func->send_mbox;
+	struct hinic_hwdev *hwdev = func_to_func->hwdev;
+	struct completion *done = &send_mbox->send_done;
+	u32 cnt = 0;
+	ulong jif;
+
+	if (poll) {
+		while (cnt < MBOX_MSG_POLLING_TIMEOUT) {
+			*wb_status = get_mbox_status(send_mbox);
+			if (MBOX_STATUS_FINISHED(*wb_status))
+				break;
+
+			usleep_range(900, 1000);
+			cnt++;
+		}
+
+		if (cnt == MBOX_MSG_POLLING_TIMEOUT) {
+			dev_err(&hwdev->hwif->pdev->dev, "Send mailbox segment timeout, wb status: 0x%x\n",
+				*wb_status);
+			dump_mox_reg(hwdev);
+			return -ETIMEDOUT;
+		}
+	} else {
+		jif = msecs_to_jiffies(HINIC_MBOX_COMP_TIME);
+		if (!wait_for_completion_timeout(done, jif)) {
+			dev_err(&hwdev->hwif->pdev->dev, "Send mailbox segment timeout\n");
+			dump_mox_reg(hwdev);
+			return -ETIMEDOUT;
+		}
+
+		*wb_status = get_mbox_status(send_mbox);
+	}
+
+	return 0;
+}
+
+static int send_mbox_seg(struct hinic_mbox_func_to_func *func_to_func,
+			 u64 header, u16 dst_func, void *seg, u16 seg_len,
+			 int poll, void *msg_info)
+{
+	struct hinic_send_mbox *send_mbox = &func_to_func->send_mbox;
+	u16 seq_dir = HINIC_MBOX_HEADER_GET(header, DIRECTION);
+	struct hinic_hwdev *hwdev = func_to_func->hwdev;
+	struct completion *done = &send_mbox->send_done;
+	u8 num_aeqs = hwdev->hwif->attr.num_aeqs;
+	u16 dst_aeqn, wb_status = 0, errcode;
+
+	if (num_aeqs >= 4)
+		dst_aeqn = (seq_dir == HINIC_HWIF_DIRECT_SEND) ?
+			   HINIC_MBOX_RECV_AEQN : HINIC_MBOX_RSP_AEQN;
+	else
+		dst_aeqn = 0;
+
+	if (!poll)
+		init_completion(done);
+
+	clear_mbox_status(send_mbox);
+
+	mbox_copy_header(hwdev, send_mbox, &header);
+
+	mbox_copy_send_data(hwdev, send_mbox, seg, seg_len);
+
+	write_mbox_msg_attr(func_to_func, dst_func, dst_aeqn, seg_len, poll);
+
+	wmb(); /* writing the mbox msg attributes */
+
+	if (wait_for_mbox_seg_completion(func_to_func, poll, &wb_status))
+		return -ETIMEDOUT;
+
+	if (!MBOX_STATUS_SUCCESS(wb_status)) {
+		dev_err(&hwdev->hwif->pdev->dev, "Send mailbox segment to function %d error, wb status: 0x%x\n",
+			dst_func, wb_status);
+		errcode = MBOX_STATUS_ERRCODE(wb_status);
+		return errcode ? errcode : -EFAULT;
+	}
+
+	return 0;
+}
+
+static int send_mbox_to_func(struct hinic_mbox_func_to_func *func_to_func,
+			     enum hinic_mod_type mod, u16 cmd, void *msg,
+			     u16 msg_len, u16 dst_func,
+			     enum hinic_hwif_direction_type direction,
+			     enum hinic_mbox_ack_type ack_type,
+			     struct mbox_msg_info *msg_info)
+{
+	struct hinic_hwdev *hwdev = func_to_func->hwdev;
+	u16 seg_len = MBOX_SEG_LEN;
+	u8 *msg_seg = (u8 *)msg;
+	u16 left = msg_len;
+	u32 seq_id = 0;
+	u64 header = 0;
+	int err = 0;
+
+	down(&func_to_func->msg_send_sem);
+
+	header = HINIC_MBOX_HEADER_SET(msg_len, MSG_LEN) |
+		 HINIC_MBOX_HEADER_SET(mod, MODULE) |
+		 HINIC_MBOX_HEADER_SET(seg_len, SEG_LEN) |
+		 HINIC_MBOX_HEADER_SET(ack_type, NO_ACK) |
+		 HINIC_MBOX_HEADER_SET(SEQ_ID_START_VAL, SEQID) |
+		 HINIC_MBOX_HEADER_SET(NOT_LAST_SEG, LAST) |
+		 HINIC_MBOX_HEADER_SET(direction, DIRECTION) |
+		 HINIC_MBOX_HEADER_SET(cmd, CMD) |
+		 /* The vf's offset to it's associated pf */
+		 HINIC_MBOX_HEADER_SET(msg_info->msg_id, MSG_ID) |
+		 HINIC_MBOX_HEADER_SET(msg_info->status, STATUS) |
+		 HINIC_MBOX_HEADER_SET(hinic_global_func_id_hw(hwdev->hwif),
+				       SRC_GLB_FUNC_IDX);
+
+	while (!(HINIC_MBOX_HEADER_GET(header, LAST))) {
+		if (left <= HINIC_MBOX_SEG_LEN) {
+			header &= ~MBOX_SEGLEN_MASK;
+			header |= HINIC_MBOX_HEADER_SET(left, SEG_LEN);
+			header |= HINIC_MBOX_HEADER_SET(LAST_SEG, LAST);
+
+			seg_len = left;
+		}
+
+		err = send_mbox_seg(func_to_func, header, dst_func, msg_seg,
+				    seg_len, MBOX_SEND_MSG_INT, msg_info);
+		if (err) {
+			dev_err(&hwdev->hwif->pdev->dev, "Failed to send mbox seg, seq_id=0x%llx\n",
+				HINIC_MBOX_HEADER_GET(header, SEQID));
+			goto err_send_mbox_seg;
+		}
+
+		left -= HINIC_MBOX_SEG_LEN;
+		msg_seg += HINIC_MBOX_SEG_LEN;
+
+		seq_id++;
+		header &= ~(HINIC_MBOX_HEADER_SET(HINIC_MBOX_HEADER_SEQID_MASK,
+						  SEQID));
+		header |= HINIC_MBOX_HEADER_SET(seq_id, SEQID);
+	}
+
+err_send_mbox_seg:
+	up(&func_to_func->msg_send_sem);
+
+	return err;
+}
+
+static void
+response_for_recv_func_mbox(struct hinic_mbox_func_to_func *func_to_func,
+			    struct hinic_recv_mbox *recv_mbox, int err,
+			    u16 out_size, u16 src_func_idx)
+{
+	struct mbox_msg_info msg_info = {0};
+
+	if (recv_mbox->ack_type == MBOX_ACK) {
+		msg_info.msg_id = recv_mbox->msg_info.msg_id;
+		if (err == HINIC_MBOX_PF_BUSY_ACTIVE_FW)
+			msg_info.status = HINIC_MBOX_PF_BUSY_ACTIVE_FW;
+		else if (err == HINIC_MBOX_VF_CMD_ERROR)
+			msg_info.status = HINIC_MBOX_VF_CMD_ERROR;
+		else if (err)
+			msg_info.status = HINIC_MBOX_PF_SEND_ERR;
+
+		/* if no data needs to response, set out_size to 1 */
+		if (!out_size || err)
+			out_size = MBOX_MSG_NO_DATA_LEN;
+
+		send_mbox_to_func(func_to_func, recv_mbox->mod, recv_mbox->cmd,
+				  recv_mbox->buf_out, out_size, src_func_idx,
+				  HINIC_HWIF_RESPONSE, MBOX_ACK,
+				  &msg_info);
+	}
+}
+
+static void recv_func_mbox_handler(struct hinic_mbox_func_to_func *func_to_func,
+				   struct hinic_recv_mbox *recv_mbox,
+				   u16 src_func_idx)
+{
+	void *buf_out = recv_mbox->buf_out;
+	u16 out_size = MBOX_MAX_BUF_SZ;
+	int err = 0;
+
+	if (HINIC_IS_VF(func_to_func->hwif)) {
+		err = recv_vf_mbox_handler(func_to_func, recv_mbox, buf_out,
+					   &out_size);
+	} else {
+		if (IS_PF_OR_PPF_SRC(src_func_idx))
+			dev_warn(&func_to_func->hwif->pdev->dev,
+				 "Unsupported pf2pf mbox msg\n");
+		else
+			err = recv_pf_from_vf_mbox_handler(func_to_func,
+							   recv_mbox,
+							   src_func_idx,
+							   buf_out, &out_size);
+	}
+
+	response_for_recv_func_mbox(func_to_func, recv_mbox, err, out_size,
+				    src_func_idx);
+	kfree(recv_mbox->buf_out);
+	kfree(recv_mbox->mbox);
+	kfree(recv_mbox);
+}
+
+static void set_mbox_to_func_event(struct hinic_mbox_func_to_func *func_to_func,
+				   enum mbox_event_state event_flag)
+{
+	spin_lock(&func_to_func->mbox_lock);
+	func_to_func->event_flag = event_flag;
+	spin_unlock(&func_to_func->mbox_lock);
+}
+
+static int mbox_resp_info_handler(struct hinic_mbox_func_to_func *func_to_func,
+				  struct hinic_recv_mbox *mbox_for_resp,
+				  enum hinic_mod_type mod, u16 cmd,
+				  void *buf_out, u16 *out_size)
+{
+	int err;
+
+	if (mbox_for_resp->msg_info.status) {
+		err = mbox_for_resp->msg_info.status;
+		if (err != HINIC_MBOX_PF_BUSY_ACTIVE_FW)
+			dev_err(&func_to_func->hwif->pdev->dev, "Mbox response error(0x%x)\n",
+				mbox_for_resp->msg_info.status);
+		return err;
+	}
+
+	if (buf_out && out_size) {
+		if (*out_size < mbox_for_resp->mbox_len) {
+			dev_err(&func_to_func->hwif->pdev->dev,
+				"Invalid response mbox message length: %d for mod %d cmd %d, should less than: %d\n",
+				mbox_for_resp->mbox_len, mod, cmd, *out_size);
+			return -EFAULT;
+		}
+
+		if (mbox_for_resp->mbox_len)
+			memcpy(buf_out, mbox_for_resp->mbox,
+			       mbox_for_resp->mbox_len);
+
+		*out_size = mbox_for_resp->mbox_len;
+	}
+
+	return 0;
+}
+
+int hinic_mbox_to_func(struct hinic_mbox_func_to_func *func_to_func,
+		       enum hinic_mod_type mod, u16 cmd, u16 dst_func,
+		       void *buf_in, u16 in_size, void *buf_out,
+		       u16 *out_size, u32 timeout)
+{
+	struct hinic_recv_mbox *mbox_for_resp;
+	struct mbox_msg_info msg_info = {0};
+	ulong timeo;
+	int err;
+
+	mbox_for_resp = &func_to_func->mbox_resp[dst_func];
+
+	down(&func_to_func->mbox_send_sem);
+
+	init_completion(&mbox_for_resp->recv_done);
+
+	msg_info.msg_id = MBOX_MSG_ID_INC(func_to_func);
+
+	set_mbox_to_func_event(func_to_func, EVENT_START);
+
+	err = send_mbox_to_func(func_to_func, mod, cmd, buf_in, in_size,
+				dst_func, HINIC_HWIF_DIRECT_SEND, MBOX_ACK,
+				&msg_info);
+	if (err) {
+		dev_err(&func_to_func->hwif->pdev->dev, "Send mailbox failed, msg_id: %d\n",
+			msg_info.msg_id);
+		set_mbox_to_func_event(func_to_func, EVENT_FAIL);
+		goto err_send_mbox;
+	}
+
+	timeo = msecs_to_jiffies(timeout ? timeout : HINIC_MBOX_COMP_TIME);
+	if (!wait_for_completion_timeout(&mbox_for_resp->recv_done, timeo)) {
+		set_mbox_to_func_event(func_to_func, EVENT_TIMEOUT);
+		dev_err(&func_to_func->hwif->pdev->dev,
+			"Send mbox msg timeout, msg_id: %d\n", msg_info.msg_id);
+		err = -ETIMEDOUT;
+		goto err_send_mbox;
+	}
+
+	set_mbox_to_func_event(func_to_func, EVENT_END);
+
+	err = mbox_resp_info_handler(func_to_func, mbox_for_resp, mod, cmd,
+				     buf_out, out_size);
+
+err_send_mbox:
+	up(&func_to_func->mbox_send_sem);
+
+	return err;
+}
+
+static int mbox_func_params_valid(struct hinic_mbox_func_to_func *func_to_func,
+				  void *buf_in, u16 in_size)
+{
+	if (in_size > HINIC_MBOX_DATA_SIZE) {
+		dev_err(&func_to_func->hwif->pdev->dev,
+			"Mbox msg len(%d) exceed limit(%d)\n",
+			in_size, HINIC_MBOX_DATA_SIZE);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int hinic_mbox_to_pf(struct hinic_hwdev *hwdev,
+		     enum hinic_mod_type mod, u8 cmd, void *buf_in,
+		     u16 in_size, void *buf_out, u16 *out_size, u32 timeout)
+{
+	struct hinic_mbox_func_to_func *func_to_func = hwdev->func_to_func;
+	int err = mbox_func_params_valid(func_to_func, buf_in, in_size);
+
+	if (err)
+		return err;
+
+	if (!HINIC_IS_VF(hwdev->hwif)) {
+		dev_err(&hwdev->hwif->pdev->dev, "Params error, func_type: %d\n",
+			HINIC_FUNC_TYPE(hwdev->hwif));
+		return -EINVAL;
+	}
+
+	return hinic_mbox_to_func(func_to_func, mod, cmd,
+				  hinic_pf_id_of_vf_hw(hwdev->hwif), buf_in,
+				  in_size, buf_out, out_size, timeout);
+}
+
+int hinic_mbox_to_vf(struct hinic_hwdev *hwdev,
+		     enum hinic_mod_type mod, u16 vf_id, u8 cmd, void *buf_in,
+		     u16 in_size, void *buf_out, u16 *out_size, u32 timeout)
+{
+	struct hinic_mbox_func_to_func *func_to_func;
+	u16 dst_func_idx;
+	int err;
+
+	if (!hwdev)
+		return -EINVAL;
+
+	func_to_func = hwdev->func_to_func;
+	err = mbox_func_params_valid(func_to_func, buf_in, in_size);
+	if (err)
+		return err;
+
+	if (HINIC_IS_VF(hwdev->hwif)) {
+		dev_err(&hwdev->hwif->pdev->dev, "Params error, func_type: %d\n",
+			HINIC_FUNC_TYPE(hwdev->hwif));
+		return -EINVAL;
+	}
+
+	if (!vf_id) {
+		dev_err(&hwdev->hwif->pdev->dev,
+			"VF id(%d) error!\n", vf_id);
+		return -EINVAL;
+	}
+
+	/* vf_offset_to_pf + vf_id is the vf's global function id of vf in
+	 * this pf
+	 */
+	dst_func_idx = hinic_glb_pf_vf_offset(hwdev->hwif) + vf_id;
+
+	return hinic_mbox_to_func(func_to_func, mod, cmd, dst_func_idx, buf_in,
+				  in_size, buf_out, out_size, timeout);
+}
+
+static int init_mbox_info(struct hinic_recv_mbox *mbox_info)
+{
+	int err;
+
+	mbox_info->seq_id = SEQ_ID_MAX_VAL;
+
+	mbox_info->mbox = kzalloc(MBOX_MAX_BUF_SZ, GFP_KERNEL);
+	if (!mbox_info->mbox)
+		return -ENOMEM;
+
+	mbox_info->buf_out = kzalloc(MBOX_MAX_BUF_SZ, GFP_KERNEL);
+	if (!mbox_info->buf_out) {
+		err = -ENOMEM;
+		goto err_alloc_buf_out;
+	}
+
+	atomic_set(&mbox_info->msg_cnt, 0);
+
+	return 0;
+
+err_alloc_buf_out:
+	kfree(mbox_info->mbox);
+
+	return err;
+}
+
+static void clean_mbox_info(struct hinic_recv_mbox *mbox_info)
+{
+	kfree(mbox_info->buf_out);
+	kfree(mbox_info->mbox);
+}
+
+static int alloc_mbox_info(struct hinic_hwdev *hwdev,
+			   struct hinic_recv_mbox *mbox_info)
+{
+	u16 func_idx, i;
+	int err;
+
+	for (func_idx = 0; func_idx < HINIC_MAX_FUNCTIONS; func_idx++) {
+		err = init_mbox_info(&mbox_info[func_idx]);
+		if (err) {
+			dev_err(&hwdev->hwif->pdev->dev, "Failed to init function %d mbox info\n",
+				func_idx);
+			goto err_init_mbox_info;
+		}
+	}
+
+	return 0;
+
+err_init_mbox_info:
+	for (i = 0; i < func_idx; i++)
+		clean_mbox_info(&mbox_info[i]);
+
+	return err;
+}
+
+static void free_mbox_info(struct hinic_recv_mbox *mbox_info)
+{
+	u16 func_idx;
+
+	for (func_idx = 0; func_idx < HINIC_MAX_FUNCTIONS; func_idx++)
+		clean_mbox_info(&mbox_info[func_idx]);
+}
+
+static void prepare_send_mbox(struct hinic_mbox_func_to_func *func_to_func)
+{
+	struct hinic_send_mbox *send_mbox = &func_to_func->send_mbox;
+
+	send_mbox->data = MBOX_AREA(func_to_func->hwif);
+}
+
+static int alloc_mbox_wb_status(struct hinic_mbox_func_to_func *func_to_func)
+{
+	struct hinic_send_mbox *send_mbox = &func_to_func->send_mbox;
+	struct hinic_hwdev *hwdev = func_to_func->hwdev;
+	u32 addr_h, addr_l;
+
+	send_mbox->wb_vaddr = dma_alloc_coherent(&hwdev->hwif->pdev->dev,
+						 MBOX_WB_STATUS_LEN,
+						 &send_mbox->wb_paddr,
+						 GFP_KERNEL);
+	if (!send_mbox->wb_vaddr)
+		return -ENOMEM;
+
+	send_mbox->wb_status = send_mbox->wb_vaddr;
+
+	addr_h = upper_32_bits(send_mbox->wb_paddr);
+	addr_l = lower_32_bits(send_mbox->wb_paddr);
+
+	hinic_hwif_write_reg(hwdev->hwif, HINIC_FUNC_CSR_MAILBOX_RESULT_H_OFF,
+			     addr_h);
+	hinic_hwif_write_reg(hwdev->hwif, HINIC_FUNC_CSR_MAILBOX_RESULT_L_OFF,
+			     addr_l);
+
+	return 0;
+}
+
+static void free_mbox_wb_status(struct hinic_mbox_func_to_func *func_to_func)
+{
+	struct hinic_send_mbox *send_mbox = &func_to_func->send_mbox;
+	struct hinic_hwdev *hwdev = func_to_func->hwdev;
+
+	hinic_hwif_write_reg(hwdev->hwif, HINIC_FUNC_CSR_MAILBOX_RESULT_H_OFF,
+			     0);
+	hinic_hwif_write_reg(hwdev->hwif, HINIC_FUNC_CSR_MAILBOX_RESULT_L_OFF,
+			     0);
+
+	dma_free_coherent(&hwdev->hwif->pdev->dev, MBOX_WB_STATUS_LEN,
+			  send_mbox->wb_vaddr,
+			  send_mbox->wb_paddr);
+}
+
+static int comm_pf_mbox_handler(void *handle, u16 vf_id, u8 cmd, void *buf_in,
+				u16 in_size, void *buf_out, u16 *out_size)
+{
+	struct hinic_hwdev *hwdev = handle;
+	struct hinic_pfhwdev *pfhwdev;
+	int err = 0;
+
+	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
+
+	if (cmd == HINIC_COMM_CMD_START_FLR) {
+		*out_size = 0;
+	} else {
+		err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM,
+					cmd, buf_in, in_size, buf_out, out_size,
+					HINIC_MGMT_MSG_SYNC);
+		if (err && err != HINIC_MBOX_PF_BUSY_ACTIVE_FW)
+			dev_err(&hwdev->hwif->pdev->dev,
+				"PF mbox common callback handler err: %d\n",
+				err);
+	}
+
+	return err;
+}
+
+int hinic_func_to_func_init(struct hinic_hwdev *hwdev)
+{
+	struct hinic_mbox_func_to_func *func_to_func;
+	struct hinic_pfhwdev *pfhwdev;
+	int err;
+
+	pfhwdev =  container_of(hwdev, struct hinic_pfhwdev, hwdev);
+	func_to_func = kzalloc(sizeof(*func_to_func), GFP_KERNEL);
+	if (!func_to_func)
+		return -ENOMEM;
+
+	hwdev->func_to_func = func_to_func;
+	func_to_func->hwdev = hwdev;
+	func_to_func->hwif = hwdev->hwif;
+	sema_init(&func_to_func->mbox_send_sem, 1);
+	sema_init(&func_to_func->msg_send_sem, 1);
+	spin_lock_init(&func_to_func->mbox_lock);
+	func_to_func->workq = create_singlethread_workqueue(HINIC_MBOX_WQ_NAME);
+	if (!func_to_func->workq) {
+		dev_err(&hwdev->hwif->pdev->dev, "Failed to initialize MBOX workqueue\n");
+		err = -ENOMEM;
+		goto err_create_mbox_workq;
+	}
+
+	err = alloc_mbox_info(hwdev, func_to_func->mbox_send);
+	if (err) {
+		dev_err(&hwdev->hwif->pdev->dev, "Failed to alloc mem for mbox_active\n");
+		goto err_alloc_mbox_for_send;
+	}
+
+	err = alloc_mbox_info(hwdev, func_to_func->mbox_resp);
+	if (err) {
+		dev_err(&hwdev->hwif->pdev->dev, "Failed to alloc mem for mbox_passive\n");
+		goto err_alloc_mbox_for_resp;
+	}
+
+	err = alloc_mbox_wb_status(func_to_func);
+	if (err) {
+		dev_err(&hwdev->hwif->pdev->dev, "Failed to alloc mbox write back status\n");
+		goto err_alloc_wb_status;
+	}
+
+	prepare_send_mbox(func_to_func);
+
+	hinic_aeq_register_hw_cb(&hwdev->aeqs, HINIC_MBX_FROM_FUNC,
+				 &pfhwdev->hwdev, hinic_mbox_func_aeqe_handler);
+	hinic_aeq_register_hw_cb(&hwdev->aeqs, HINIC_MBX_SEND_RSLT,
+				 &pfhwdev->hwdev, hinic_mbox_self_aeqe_handler);
+
+	if (!HINIC_IS_VF(hwdev->hwif))
+		hinic_register_pf_mbox_cb(hwdev, HINIC_MOD_COMM,
+					  comm_pf_mbox_handler);
+
+	return 0;
+
+err_alloc_wb_status:
+	free_mbox_info(func_to_func->mbox_resp);
+
+err_alloc_mbox_for_resp:
+	free_mbox_info(func_to_func->mbox_send);
+
+err_alloc_mbox_for_send:
+	destroy_workqueue(func_to_func->workq);
+
+err_create_mbox_workq:
+	kfree(func_to_func);
+
+	return err;
+}
+
+void hinic_func_to_func_free(struct hinic_hwdev *hwdev)
+{
+	struct hinic_mbox_func_to_func *func_to_func = hwdev->func_to_func;
+
+	hinic_aeq_unregister_hw_cb(&hwdev->aeqs, HINIC_MBX_FROM_FUNC);
+	hinic_aeq_unregister_hw_cb(&hwdev->aeqs, HINIC_MBX_SEND_RSLT);
+
+	hinic_unregister_pf_mbox_cb(hwdev, HINIC_MOD_COMM);
+	/* destroy workqueue before free related mbox resources in case of
+	 * illegal resource access
+	 */
+	destroy_workqueue(func_to_func->workq);
+
+	free_mbox_wb_status(func_to_func);
+	free_mbox_info(func_to_func->mbox_resp);
+	free_mbox_info(func_to_func->mbox_send);
+
+	kfree(func_to_func);
+}
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.h
new file mode 100644
index 000000000000..7b18559bfe80
--- /dev/null
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.h
@@ -0,0 +1,154 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Huawei HiNIC PCI Express Linux driver
+ * Copyright(c) 2017 Huawei Technologies Co., Ltd
+ */
+
+#ifndef HINIC_MBOX_H_
+#define HINIC_MBOX_H_
+
+#define HINIC_MBOX_PF_SEND_ERR		0x1
+#define HINIC_MBOX_PF_BUSY_ACTIVE_FW	0x2
+#define HINIC_MBOX_VF_CMD_ERROR		0x3
+
+#define HINIC_MAX_FUNCTIONS		512
+
+#define HINIC_MAX_PF_FUNCS		16
+
+#define HINIC_MBOX_WQ_NAME		"hinic_mbox"
+
+#define HINIC_FUNC_CSR_MAILBOX_DATA_OFF			0x80
+#define HINIC_FUNC_CSR_MAILBOX_CONTROL_OFF		0x0100
+#define HINIC_FUNC_CSR_MAILBOX_INT_OFFSET_OFF		0x0104
+#define HINIC_FUNC_CSR_MAILBOX_RESULT_H_OFF		0x0108
+#define HINIC_FUNC_CSR_MAILBOX_RESULT_L_OFF		0x010C
+
+enum hinic_mbox_ack_type {
+	MBOX_ACK,
+	MBOX_NO_ACK,
+};
+
+struct mbox_msg_info {
+	u8 msg_id;
+	u8 status;
+};
+
+struct hinic_recv_mbox {
+	struct completion	recv_done;
+	void			*mbox;
+	u8			cmd;
+	enum hinic_mod_type	mod;
+	u16			mbox_len;
+	void			*buf_out;
+	enum hinic_mbox_ack_type ack_type;
+	struct mbox_msg_info	msg_info;
+	u8			seq_id;
+	atomic_t		msg_cnt;
+};
+
+struct hinic_send_mbox {
+	struct completion	send_done;
+	u8			*data;
+
+	u64			*wb_status;
+	void			*wb_vaddr;
+	dma_addr_t		wb_paddr;
+};
+
+typedef void (*hinic_vf_mbox_cb)(void *handle, u8 cmd, void *buf_in,
+				u16 in_size, void *buf_out, u16 *out_size);
+typedef int (*hinic_pf_mbox_cb)(void *handle, u16 vf_id, u8 cmd, void *buf_in,
+				u16 in_size, void *buf_out, u16 *out_size);
+
+enum mbox_event_state {
+	EVENT_START = 0,
+	EVENT_FAIL,
+	EVENT_TIMEOUT,
+	EVENT_END,
+};
+
+enum hinic_mbox_cb_state {
+	HINIC_VF_MBOX_CB_REG = 0,
+	HINIC_VF_MBOX_CB_RUNNING,
+	HINIC_PF_MBOX_CB_REG,
+	HINIC_PF_MBOX_CB_RUNNING,
+	HINIC_PPF_MBOX_CB_REG,
+	HINIC_PPF_MBOX_CB_RUNNING,
+	HINIC_PPF_TO_PF_MBOX_CB_REG,
+	HINIC_PPF_TO_PF_MBOX_CB_RUNNIG,
+};
+
+struct hinic_mbox_func_to_func {
+	struct hinic_hwdev	*hwdev;
+	struct hinic_hwif		*hwif;
+
+	struct semaphore	mbox_send_sem;
+	struct semaphore	msg_send_sem;
+	struct hinic_send_mbox	send_mbox;
+
+	struct workqueue_struct *workq;
+
+	struct hinic_recv_mbox	mbox_resp[HINIC_MAX_FUNCTIONS];
+	struct hinic_recv_mbox	mbox_send[HINIC_MAX_FUNCTIONS];
+
+	hinic_vf_mbox_cb	vf_mbox_cb[HINIC_MOD_MAX];
+	hinic_pf_mbox_cb	pf_mbox_cb[HINIC_MOD_MAX];
+	unsigned long		pf_mbox_cb_state[HINIC_MOD_MAX];
+	unsigned long		vf_mbox_cb_state[HINIC_MOD_MAX];
+
+	u8 send_msg_id;
+	enum mbox_event_state event_flag;
+
+	/* lock for mbox event flag */
+	spinlock_t mbox_lock;
+};
+
+struct hinic_mbox_work {
+	struct work_struct work;
+	u16 src_func_idx;
+	struct hinic_mbox_func_to_func *func_to_func;
+	struct hinic_recv_mbox *recv_mbox;
+};
+
+struct vf_cmd_msg_handle {
+	u8 cmd;
+	int (*cmd_msg_handler)(void *hwdev, u16 vf_id,
+			       void *buf_in, u16 in_size,
+			       void *buf_out, u16 *out_size);
+};
+
+int hinic_register_pf_mbox_cb(struct hinic_hwdev *hwdev,
+			      enum hinic_mod_type mod,
+			      hinic_pf_mbox_cb callback);
+
+int hinic_register_vf_mbox_cb(struct hinic_hwdev *hwdev,
+			      enum hinic_mod_type mod,
+			      hinic_vf_mbox_cb callback);
+
+void hinic_unregister_pf_mbox_cb(struct hinic_hwdev *hwdev,
+				 enum hinic_mod_type mod);
+
+void hinic_unregister_vf_mbox_cb(struct hinic_hwdev *hwdev,
+				 enum hinic_mod_type mod);
+
+void hinic_mbox_func_aeqe_handler(void *handle, void *header, u8 size);
+
+void hinic_mbox_self_aeqe_handler(void *handle, void *header, u8 size);
+
+int hinic_func_to_func_init(struct hinic_hwdev *hwdev);
+
+void hinic_func_to_func_free(struct hinic_hwdev *hwdev);
+
+int hinic_mbox_to_pf(struct hinic_hwdev *hwdev, enum hinic_mod_type mod,
+		     u8 cmd, void *buf_in, u16 in_size, void *buf_out,
+		     u16 *out_size, u32 timeout);
+
+int hinic_mbox_to_func(struct hinic_mbox_func_to_func *func_to_func,
+		       enum hinic_mod_type mod, u16 cmd, u16 dst_func,
+		       void *buf_in, u16 in_size, void *buf_out,
+		       u16 *out_size, u32 timeout);
+
+int hinic_mbox_to_vf(struct hinic_hwdev *hwdev,
+		     enum hinic_mod_type mod, u16 vf_id, u8 cmd, void *buf_in,
+		     u16 in_size, void *buf_out, u16 *out_size, u32 timeout);
+
+#endif
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
index 8995e32dd1c0..eef855f11a01 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
@@ -353,7 +353,11 @@ int hinic_msg_to_mgmt(struct hinic_pf_to_mgmt *pf_to_mgmt,
 		return -EINVAL;
 	}
 
-	return msg_to_mgmt_sync(pf_to_mgmt, mod, cmd, buf_in, in_size,
+	if (HINIC_IS_VF(hwif))
+		return hinic_mbox_to_pf(pf_to_mgmt->hwdev, mod, cmd, buf_in,
+					in_size, buf_out, out_size, 0);
+	else
+		return msg_to_mgmt_sync(pf_to_mgmt, mod, cmd, buf_in, in_size,
 				buf_out, out_size, MGMT_DIRECT_SEND,
 				MSG_NOT_RESP);
 }
@@ -390,8 +394,8 @@ static void mgmt_recv_msg_handler(struct hinic_pf_to_mgmt *pf_to_mgmt,
 			    recv_msg->msg, recv_msg->msg_len,
 			    buf_out, &out_size);
 	else
-		dev_err(&pdev->dev, "No MGMT msg handler, mod = %d\n",
-			recv_msg->mod);
+		dev_err(&pdev->dev, "No MGMT msg handler, mod: %d, cmd: %d\n",
+			recv_msg->mod, recv_msg->cmd);
 
 	mgmt_cb->state &= ~HINIC_MGMT_CB_RUNNING;
 
@@ -553,6 +557,10 @@ int hinic_pf_to_mgmt_init(struct hinic_pf_to_mgmt *pf_to_mgmt,
 	int err;
 
 	pf_to_mgmt->hwif = hwif;
+	pf_to_mgmt->hwdev = hwdev;
+
+	if (HINIC_IS_VF(hwif))
+		return 0;
 
 	sema_init(&pf_to_mgmt->sync_msg_lock, 1);
 	pf_to_mgmt->sync_msg_id = 0;
@@ -584,6 +592,9 @@ void hinic_pf_to_mgmt_free(struct hinic_pf_to_mgmt *pf_to_mgmt)
 	struct hinic_pfhwdev *pfhwdev = mgmt_to_pfhwdev(pf_to_mgmt);
 	struct hinic_hwdev *hwdev = &pfhwdev->hwdev;
 
+	if (HINIC_IS_VF(hwdev->hwif))
+		return;
+
 	hinic_aeq_unregister_hw_cb(&hwdev->aeqs, HINIC_MSG_FROM_MGMT_CPU);
 	hinic_api_cmd_free(pf_to_mgmt->cmd_chain);
 }
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h
index 182fba17b643..c2b142c08b0e 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h
@@ -60,7 +60,9 @@ enum hinic_cfg_cmd {
 };
 
 enum hinic_comm_cmd {
+	HINIC_COMM_CMD_START_FLR          = 0x1,
 	HINIC_COMM_CMD_IO_STATUS_GET    = 0x3,
+	HINIC_COMM_CMD_DMA_ATTR_SET	    = 0x4,
 
 	HINIC_COMM_CMD_CMDQ_CTXT_SET    = 0x10,
 	HINIC_COMM_CMD_CMDQ_CTXT_GET    = 0x11,
@@ -74,7 +76,13 @@ enum hinic_comm_cmd {
 
 	HINIC_COMM_CMD_IO_RES_CLEAR     = 0x29,
 
-	HINIC_COMM_CMD_MAX              = 0x32,
+	HINIC_COMM_CMD_CEQ_CTRL_REG_WR_BY_UP = 0x33,
+
+	HINIC_COMM_CMD_L2NIC_RESET		= 0x4b,
+
+	HINIC_COMM_CMD_PAGESIZE_SET	= 0x50,
+
+	HINIC_COMM_CMD_MAX              = 0x51,
 };
 
 enum hinic_mgmt_cb_state {
@@ -107,7 +115,7 @@ struct hinic_mgmt_cb {
 
 struct hinic_pf_to_mgmt {
 	struct hinic_hwif               *hwif;
-
+	struct hinic_hwdev		*hwdev;
 	struct semaphore                sync_msg_lock;
 	u16                             sync_msg_id;
 	u8                              *sync_msg_buf;
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c
index be364b7a7019..20c5c8ea452e 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c
@@ -108,7 +108,12 @@ void hinic_sq_prepare_ctxt(struct hinic_sq_ctxt *sq_ctxt,
 	wq_page_pfn_hi = upper_32_bits(wq_page_pfn);
 	wq_page_pfn_lo = lower_32_bits(wq_page_pfn);
 
-	wq_block_pfn = HINIC_WQ_BLOCK_PFN(wq->block_paddr);
+	/* If only one page, use 0-level CLA */
+	if (wq->num_q_pages == 1)
+		wq_block_pfn = HINIC_WQ_BLOCK_PFN(wq_page_addr);
+	else
+		wq_block_pfn = HINIC_WQ_BLOCK_PFN(wq->block_paddr);
+
 	wq_block_pfn_hi = upper_32_bits(wq_block_pfn);
 	wq_block_pfn_lo = lower_32_bits(wq_block_pfn);
 
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h
index 79091e131418..c30d092e48d5 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h
@@ -38,8 +38,8 @@
 #define HINIC_SQ_WQEBB_SIZE                     64
 #define HINIC_RQ_WQEBB_SIZE                     32
 
-#define HINIC_SQ_PAGE_SIZE                      SZ_4K
-#define HINIC_RQ_PAGE_SIZE                      SZ_4K
+#define HINIC_SQ_PAGE_SIZE                      SZ_256K
+#define HINIC_RQ_PAGE_SIZE                      SZ_256K
 
 #define HINIC_SQ_DEPTH                          SZ_4K
 #define HINIC_RQ_DEPTH                          SZ_4K
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c
index 03363216ff59..5dc3743f8091 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c
@@ -503,7 +503,7 @@ static int alloc_wq_pages(struct hinic_wq *wq, struct hinic_hwif *hwif,
  * Return 0 - Success, negative - Failure
  **/
 int hinic_wq_allocate(struct hinic_wqs *wqs, struct hinic_wq *wq,
-		      u16 wqebb_size, u16 wq_page_size, u16 q_depth,
+		      u16 wqebb_size, u32 wq_page_size, u16 q_depth,
 		      u16 max_wqe_size)
 {
 	struct hinic_hwif *hwif = wqs->hwif;
@@ -600,7 +600,7 @@ void hinic_wq_free(struct hinic_wqs *wqs, struct hinic_wq *wq)
  **/
 int hinic_wqs_cmdq_alloc(struct hinic_cmdq_pages *cmdq_pages,
 			 struct hinic_wq *wq, struct hinic_hwif *hwif,
-			 int cmdq_blocks, u16 wqebb_size, u16 wq_page_size,
+			 int cmdq_blocks, u16 wqebb_size, u32 wq_page_size,
 			 u16 q_depth, u16 max_wqe_size)
 {
 	struct pci_dev *pdev = hwif->pdev;
@@ -768,7 +768,10 @@ struct hinic_hw_wqe *hinic_get_wqe(struct hinic_wq *wq, unsigned int wqe_size,
 
 	*prod_idx = curr_prod_idx;
 
-	if (curr_pg != end_pg) {
+	/* If we only have one page, still need to get shadown wqe when
+	 * wqe rolling-over page
+	 */
+	if (curr_pg != end_pg || MASKED_WQE_IDX(wq, end_prod_idx) < *prod_idx) {
 		void *shadow_addr = &wq->shadow_wqe[curr_pg * wq->max_wqe_size];
 
 		copy_wqe_to_shadow(wq, shadow_addr, num_wqebbs, *prod_idx);
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h
index 811eef744140..b06f8c0255de 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h
@@ -26,7 +26,7 @@ struct hinic_wq {
 	int             block_idx;
 
 	u16             wqebb_size;
-	u16             wq_page_size;
+	u32             wq_page_size;
 	u16             q_depth;
 	u16             max_wqe_size;
 	u16             num_wqebbs_per_page;
@@ -76,7 +76,7 @@ struct hinic_cmdq_pages {
 
 int hinic_wqs_cmdq_alloc(struct hinic_cmdq_pages *cmdq_pages,
 			 struct hinic_wq *wq, struct hinic_hwif *hwif,
-			 int cmdq_blocks, u16 wqebb_size, u16 wq_page_size,
+			 int cmdq_blocks, u16 wqebb_size, u32 wq_page_size,
 			 u16 q_depth, u16 max_wqe_size);
 
 void hinic_wqs_cmdq_free(struct hinic_cmdq_pages *cmdq_pages,
@@ -88,7 +88,7 @@ int hinic_wqs_alloc(struct hinic_wqs *wqs, int num_wqs,
 void hinic_wqs_free(struct hinic_wqs *wqs);
 
 int hinic_wq_allocate(struct hinic_wqs *wqs, struct hinic_wq *wq,
-		      u16 wqebb_size, u16 wq_page_size, u16 q_depth,
+		      u16 wqebb_size, u32 wq_page_size, u16 q_depth,
 		      u16 max_wqe_size);
 
 void hinic_wq_free(struct hinic_wqs *wqs, struct hinic_wq *wq);
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c
index 13560975c103..b66bb86cff96 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_main.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c
@@ -29,6 +29,7 @@
 #include "hinic_tx.h"
 #include "hinic_rx.h"
 #include "hinic_dev.h"
+#include "hinic_sriov.h"
 
 MODULE_AUTHOR("Huawei Technologies CO., Ltd");
 MODULE_DESCRIPTION("Huawei Intelligent NIC driver");
@@ -46,6 +47,7 @@ MODULE_PARM_DESC(rx_weight, "Number Rx packets for NAPI budget (default=64)");
 #define HINIC_DEV_ID_DUAL_PORT_100GE        0x0200
 #define HINIC_DEV_ID_DUAL_PORT_100GE_MEZZ   0x0205
 #define HINIC_DEV_ID_QUAD_PORT_25GE_MEZZ    0x0210
+#define HINIC_DEV_ID_VF    0x375e
 
 #define HINIC_WQ_NAME                   "hinic_dev"
 
@@ -65,6 +67,8 @@ MODULE_PARM_DESC(rx_weight, "Number Rx packets for NAPI budget (default=64)");
 #define rx_mode_work_to_nic_dev(rx_mode_work) \
 		container_of(rx_mode_work, struct hinic_dev, rx_mode_work)
 
+#define HINIC_WAIT_SRIOV_CFG_TIMEOUT	15000
+
 static int change_mac_addr(struct net_device *netdev, const u8 *addr);
 
 static int set_features(struct hinic_dev *nic_dev,
@@ -423,8 +427,9 @@ static int hinic_open(struct net_device *netdev)
 		goto err_func_port_state;
 	}
 
-	/* Wait up to 3 sec between port enable to link state */
-	msleep(3000);
+	if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+		/* Wait up to 3 sec between port enable to link state */
+		msleep(3000);
 
 	down(&nic_dev->mgmt_lock);
 
@@ -434,6 +439,9 @@ static int hinic_open(struct net_device *netdev)
 		goto err_port_link;
 	}
 
+	if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+		hinic_notify_all_vfs_link_changed(nic_dev->hwdev, link_state);
+
 	if (link_state == HINIC_LINK_STATE_UP)
 		nic_dev->flags |= HINIC_LINK_UP;
 
@@ -497,6 +505,9 @@ static int hinic_close(struct net_device *netdev)
 
 	up(&nic_dev->mgmt_lock);
 
+	if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+		hinic_notify_all_vfs_link_changed(nic_dev->hwdev, 0);
+
 	err = hinic_port_set_func_state(nic_dev, HINIC_FUNC_PORT_DISABLE);
 	if (err) {
 		netif_err(nic_dev, drv, netdev,
@@ -685,7 +696,7 @@ static int hinic_vlan_rx_add_vid(struct net_device *netdev,
 	}
 
 	err = hinic_port_add_mac(nic_dev, netdev->dev_addr, vid);
-	if (err) {
+	if (err && err != HINIC_PF_SET_VF_ALREADY) {
 		netif_err(nic_dev, drv, netdev, "Failed to set mac\n");
 		goto err_add_mac;
 	}
@@ -737,8 +748,6 @@ static void set_rx_mode(struct work_struct *work)
 	struct hinic_rx_mode_work *rx_mode_work = work_to_rx_mode_work(work);
 	struct hinic_dev *nic_dev = rx_mode_work_to_nic_dev(rx_mode_work);
 
-	netif_info(nic_dev, drv, nic_dev->netdev, "set rx mode work\n");
-
 	hinic_port_set_rx_mode(nic_dev, rx_mode_work->rx_mode);
 
 	__dev_uc_sync(nic_dev->netdev, add_mac_addr, remove_mac_addr);
@@ -770,8 +779,26 @@ static void hinic_set_rx_mode(struct net_device *netdev)
 static void hinic_tx_timeout(struct net_device *netdev, unsigned int txqueue)
 {
 	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	u16 sw_pi, hw_ci, sw_ci;
+	struct hinic_sq *sq;
+	u16 num_sqs, q_id;
+
+	num_sqs = hinic_hwdev_num_qps(nic_dev->hwdev);
 
 	netif_err(nic_dev, drv, netdev, "Tx timeout\n");
+
+	for (q_id = 0; q_id < num_sqs; q_id++) {
+		if (!netif_xmit_stopped(netdev_get_tx_queue(netdev, q_id)))
+			continue;
+
+		sq = hinic_hwdev_get_sq(nic_dev->hwdev, q_id);
+		sw_pi = atomic_read(&sq->wq->prod_idx) & sq->wq->mask;
+		hw_ci = be16_to_cpu(*(u16 *)(sq->hw_ci_addr)) & sq->wq->mask;
+		sw_ci = atomic_read(&sq->wq->cons_idx) & sq->wq->mask;
+		netif_err(nic_dev, drv, netdev, "Txq%d: sw_pi: %d, hw_ci: %d, sw_ci: %d, napi->state: 0x%lx\n",
+			  q_id, sw_pi, hw_ci, sw_ci,
+			  nic_dev->txqs[q_id].napi.state);
+	}
 }
 
 static void hinic_get_stats64(struct net_device *netdev,
@@ -837,6 +864,26 @@ static const struct net_device_ops hinic_netdev_ops = {
 	.ndo_get_stats64 = hinic_get_stats64,
 	.ndo_fix_features = hinic_fix_features,
 	.ndo_set_features = hinic_set_features,
+	.ndo_set_vf_mac	= hinic_ndo_set_vf_mac,
+	.ndo_set_vf_vlan = hinic_ndo_set_vf_vlan,
+	.ndo_get_vf_config = hinic_ndo_get_vf_config,
+	.ndo_set_vf_trust = hinic_ndo_set_vf_trust,
+};
+
+static const struct net_device_ops hinicvf_netdev_ops = {
+	.ndo_open = hinic_open,
+	.ndo_stop = hinic_close,
+	.ndo_change_mtu = hinic_change_mtu,
+	.ndo_set_mac_address = hinic_set_mac_addr,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_vlan_rx_add_vid = hinic_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid = hinic_vlan_rx_kill_vid,
+	.ndo_set_rx_mode = hinic_set_rx_mode,
+	.ndo_start_xmit = hinic_xmit_frame,
+	.ndo_tx_timeout = hinic_tx_timeout,
+	.ndo_get_stats64 = hinic_get_stats64,
+	.ndo_fix_features = hinic_fix_features,
+	.ndo_set_features = hinic_set_features,
 };
 
 static void netdev_features_init(struct net_device *netdev)
@@ -896,6 +943,10 @@ static void link_status_event_handler(void *handle, void *buf_in, u16 in_size,
 		netif_info(nic_dev, drv, nic_dev->netdev, "HINIC_Link is DOWN\n");
 	}
 
+	if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+		hinic_notify_all_vfs_link_changed(nic_dev->hwdev,
+						  link_status->link);
+
 	ret_link_status = buf_out;
 	ret_link_status->status = 0;
 
@@ -969,7 +1020,12 @@ static int nic_dev_init(struct pci_dev *pdev)
 	}
 
 	hinic_set_ethtool_ops(netdev);
-	netdev->netdev_ops = &hinic_netdev_ops;
+
+	if (!HINIC_IS_VF(hwdev->hwif))
+		netdev->netdev_ops = &hinic_netdev_ops;
+	else
+		netdev->netdev_ops = &hinicvf_netdev_ops;
+
 	netdev->max_mtu = ETH_MAX_MTU;
 
 	nic_dev = netdev_priv(netdev);
@@ -981,6 +1037,8 @@ static int nic_dev_init(struct pci_dev *pdev)
 	nic_dev->rxqs = NULL;
 	nic_dev->tx_weight = tx_weight;
 	nic_dev->rx_weight = rx_weight;
+	nic_dev->sriov_info.hwdev = hwdev;
+	nic_dev->sriov_info.pdev = pdev;
 
 	sema_init(&nic_dev->mgmt_lock, 1);
 
@@ -1007,11 +1065,25 @@ static int nic_dev_init(struct pci_dev *pdev)
 	pci_set_drvdata(pdev, netdev);
 
 	err = hinic_port_get_mac(nic_dev, netdev->dev_addr);
-	if (err)
-		dev_warn(&pdev->dev, "Failed to get mac address\n");
+	if (err) {
+		dev_err(&pdev->dev, "Failed to get mac address\n");
+		goto err_get_mac;
+	}
+
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
+		if (!HINIC_IS_VF(nic_dev->hwdev->hwif)) {
+			dev_err(&pdev->dev, "Invalid MAC address\n");
+			err = -EIO;
+			goto err_add_mac;
+		}
+
+		dev_info(&pdev->dev, "Invalid MAC address %pM, using random\n",
+			 netdev->dev_addr);
+		eth_hw_addr_random(netdev);
+	}
 
 	err = hinic_port_add_mac(nic_dev, netdev->dev_addr, 0);
-	if (err) {
+	if (err && err != HINIC_PF_SET_VF_ALREADY) {
 		dev_err(&pdev->dev, "Failed to add mac\n");
 		goto err_add_mac;
 	}
@@ -1053,6 +1125,7 @@ static int nic_dev_init(struct pci_dev *pdev)
 	cancel_work_sync(&rx_mode_work->work);
 
 err_set_mtu:
+err_get_mac:
 err_add_mac:
 	pci_set_drvdata(pdev, NULL);
 	destroy_workqueue(nic_dev->workq);
@@ -1126,12 +1199,37 @@ static int hinic_probe(struct pci_dev *pdev,
 	return err;
 }
 
+#define HINIC_WAIT_SRIOV_CFG_TIMEOUT	15000
+
+static void wait_sriov_cfg_complete(struct hinic_dev *nic_dev)
+{
+	struct hinic_sriov_info *sriov_info = &nic_dev->sriov_info;
+	u32 loop_cnt = 0;
+
+	set_bit(HINIC_FUNC_REMOVE, &sriov_info->state);
+	usleep_range(9900, 10000);
+
+	while (loop_cnt < HINIC_WAIT_SRIOV_CFG_TIMEOUT) {
+		if (!test_bit(HINIC_SRIOV_ENABLE, &sriov_info->state) &&
+		    !test_bit(HINIC_SRIOV_DISABLE, &sriov_info->state))
+			return;
+
+		usleep_range(9900, 10000);
+		loop_cnt++;
+	}
+}
+
 static void hinic_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct hinic_dev *nic_dev = netdev_priv(netdev);
 	struct hinic_rx_mode_work *rx_mode_work;
 
+	if (!HINIC_IS_VF(nic_dev->hwdev->hwif)) {
+		wait_sriov_cfg_complete(nic_dev);
+		hinic_pci_sriov_disable(pdev);
+	}
+
 	unregister_netdev(netdev);
 
 	hinic_hwdev_cb_unregister(nic_dev->hwdev,
@@ -1144,6 +1242,8 @@ static void hinic_remove(struct pci_dev *pdev)
 
 	destroy_workqueue(nic_dev->workq);
 
+	hinic_vf_func_free(nic_dev->hwdev);
+
 	hinic_free_hwdev(nic_dev->hwdev);
 
 	free_netdev(netdev);
@@ -1164,6 +1264,7 @@ static const struct pci_device_id hinic_pci_table[] = {
 	{ PCI_VDEVICE(HUAWEI, HINIC_DEV_ID_DUAL_PORT_100GE), 0},
 	{ PCI_VDEVICE(HUAWEI, HINIC_DEV_ID_DUAL_PORT_100GE_MEZZ), 0},
 	{ PCI_VDEVICE(HUAWEI, HINIC_DEV_ID_QUAD_PORT_25GE_MEZZ), 0},
+	{ PCI_VDEVICE(HUAWEI, HINIC_DEV_ID_VF), 0},
 	{ 0, 0}
 };
 MODULE_DEVICE_TABLE(pci, hinic_pci_table);
@@ -1174,6 +1275,7 @@ static struct pci_driver hinic_driver = {
 	.probe          = hinic_probe,
 	.remove         = hinic_remove,
 	.shutdown       = hinic_shutdown,
+	.sriov_configure = hinic_pci_sriov_configure,
 };
 
 module_pci_driver(hinic_driver);
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_port.c b/drivers/net/ethernet/huawei/hinic/hinic_port.c
index 1e389a004e50..b7fe0adcc29a 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_port.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_port.c
@@ -37,20 +37,14 @@ enum mac_op {
 static int change_mac(struct hinic_dev *nic_dev, const u8 *addr,
 		      u16 vlan_id, enum mac_op op)
 {
-	struct net_device *netdev = nic_dev->netdev;
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_port_mac_cmd port_mac_cmd;
 	struct hinic_hwif *hwif = hwdev->hwif;
+	u16 out_size = sizeof(port_mac_cmd);
 	struct pci_dev *pdev = hwif->pdev;
 	enum hinic_port_cmd cmd;
-	u16 out_size;
 	int err;
 
-	if (vlan_id >= VLAN_N_VID) {
-		netif_err(nic_dev, drv, netdev, "Invalid VLAN number\n");
-		return -EINVAL;
-	}
-
 	if (op == MAC_SET)
 		cmd = HINIC_PORT_CMD_SET_MAC;
 	else
@@ -63,12 +57,25 @@ static int change_mac(struct hinic_dev *nic_dev, const u8 *addr,
 	err = hinic_port_msg_cmd(hwdev, cmd, &port_mac_cmd,
 				 sizeof(port_mac_cmd),
 				 &port_mac_cmd, &out_size);
-	if (err || (out_size != sizeof(port_mac_cmd)) || port_mac_cmd.status) {
+	if (err || out_size != sizeof(port_mac_cmd) ||
+	    (port_mac_cmd.status  &&
+	    port_mac_cmd.status != HINIC_PF_SET_VF_ALREADY &&
+	    port_mac_cmd.status != HINIC_MGMT_STATUS_EXIST)) {
 		dev_err(&pdev->dev, "Failed to change MAC, ret = %d\n",
 			port_mac_cmd.status);
 		return -EFAULT;
 	}
 
+	if (cmd == HINIC_PORT_CMD_SET_MAC && port_mac_cmd.status ==
+	    HINIC_PF_SET_VF_ALREADY) {
+		dev_warn(&pdev->dev, "PF has already set VF mac, Ignore set operation\n");
+		return HINIC_PF_SET_VF_ALREADY;
+	}
+
+	if (cmd == HINIC_PORT_CMD_SET_MAC && port_mac_cmd.status ==
+	    HINIC_MGMT_STATUS_EXIST)
+		dev_warn(&pdev->dev, "MAC is repeated. Ignore set operation\n");
+
 	return 0;
 }
 
@@ -112,8 +119,8 @@ int hinic_port_get_mac(struct hinic_dev *nic_dev, u8 *addr)
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_port_mac_cmd port_mac_cmd;
 	struct hinic_hwif *hwif = hwdev->hwif;
+	u16 out_size = sizeof(port_mac_cmd);
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
 	int err;
 
 	port_mac_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
@@ -144,9 +151,9 @@ int hinic_port_set_mtu(struct hinic_dev *nic_dev, int new_mtu)
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_port_mtu_cmd port_mtu_cmd;
 	struct hinic_hwif *hwif = hwdev->hwif;
+	u16 out_size = sizeof(port_mtu_cmd);
 	struct pci_dev *pdev = hwif->pdev;
 	int err, max_frame;
-	u16 out_size;
 
 	if (new_mtu < HINIC_MIN_MTU_SIZE) {
 		netif_err(nic_dev, drv, netdev, "mtu < MIN MTU size");
@@ -248,14 +255,9 @@ int hinic_port_link_state(struct hinic_dev *nic_dev,
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct hinic_port_link_cmd link_cmd;
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
+	u16 out_size = sizeof(link_cmd);
 	int err;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
 	link_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
 
 	err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_GET_LINK_STATE,
@@ -284,13 +286,11 @@ int hinic_port_set_state(struct hinic_dev *nic_dev, enum hinic_port_state state)
 	struct hinic_port_state_cmd port_state;
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
+	u16 out_size = sizeof(port_state);
 	int err;
 
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "unsupported PCI Function type\n");
-		return -EINVAL;
-	}
+	if (HINIC_IS_VF(hwdev->hwif))
+		return 0;
 
 	port_state.state = state;
 
@@ -320,7 +320,7 @@ int hinic_port_set_func_state(struct hinic_dev *nic_dev,
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
+	u16 out_size = sizeof(func_state);
 	int err;
 
 	func_state.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
@@ -351,7 +351,7 @@ int hinic_port_get_cap(struct hinic_dev *nic_dev,
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
+	u16 out_size = sizeof(*port_cap);
 	int err;
 
 	port_cap->func_idx = HINIC_HWIF_FUNC_IDX(hwif);
@@ -382,7 +382,7 @@ int hinic_port_set_tso(struct hinic_dev *nic_dev, enum hinic_tso_state state)
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct hinic_tso_config tso_cfg = {0};
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
+	u16 out_size = sizeof(tso_cfg);
 	int err;
 
 	tso_cfg.func_id = HINIC_HWIF_FUNC_IDX(hwif);
@@ -405,9 +405,9 @@ int hinic_set_rx_csum_offload(struct hinic_dev *nic_dev, u32 en)
 {
 	struct hinic_checksum_offload rx_csum_cfg = {0};
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
+	u16 out_size = sizeof(rx_csum_cfg);
 	struct hinic_hwif *hwif;
 	struct pci_dev *pdev;
-	u16 out_size;
 	int err;
 
 	if (!hwdev)
@@ -443,6 +443,7 @@ int hinic_set_rx_vlan_offload(struct hinic_dev *nic_dev, u8 en)
 	if (!hwdev)
 		return -EINVAL;
 
+	out_size = sizeof(vlan_cfg);
 	hwif = hwdev->hwif;
 	pdev = hwif->pdev;
 	vlan_cfg.func_id = HINIC_HWIF_FUNC_IDX(hwif);
@@ -465,8 +466,8 @@ int hinic_set_max_qnum(struct hinic_dev *nic_dev, u8 num_rqs)
 {
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_hwif *hwif = hwdev->hwif;
-	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_rq_num rq_num = { 0 };
+	struct pci_dev *pdev = hwif->pdev;
 	u16 out_size = sizeof(rq_num);
 	int err;
 
@@ -491,8 +492,8 @@ static int hinic_set_rx_lro(struct hinic_dev *nic_dev, u8 ipv4_en, u8 ipv6_en,
 			    u8 max_wqe_num)
 {
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
-	struct hinic_hwif *hwif = hwdev->hwif;
 	struct hinic_lro_config lro_cfg = { 0 };
+	struct hinic_hwif *hwif = hwdev->hwif;
 	struct pci_dev *pdev = hwif->pdev;
 	u16 out_size = sizeof(lro_cfg);
 	int err;
@@ -568,6 +569,9 @@ int hinic_set_rx_lro_state(struct hinic_dev *nic_dev, u8 lro_en,
 	if (err)
 		return err;
 
+	if (HINIC_IS_VF(nic_dev->hwdev->hwif))
+		return 0;
+
 	err = hinic_set_rx_lro_timer(nic_dev, lro_timer);
 	if (err)
 		return err;
@@ -741,9 +745,9 @@ int hinic_get_rss_type(struct hinic_dev *nic_dev, u32 tmpl_idx,
 {
 	struct hinic_rss_context_table ctx_tbl = { 0 };
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
+	u16 out_size = sizeof(ctx_tbl);
 	struct hinic_hwif *hwif;
 	struct pci_dev *pdev;
-	u16 out_size = sizeof(ctx_tbl);
 	int err;
 
 	if (!hwdev || !rss_type)
@@ -784,7 +788,7 @@ int hinic_rss_set_template_tbl(struct hinic_dev *nic_dev, u32 template_id,
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct hinic_rss_key rss_key = { 0 };
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
+	u16 out_size = sizeof(rss_key);
 	int err;
 
 	rss_key.func_id = HINIC_HWIF_FUNC_IDX(hwif);
@@ -809,9 +813,9 @@ int hinic_rss_get_template_tbl(struct hinic_dev *nic_dev, u32 tmpl_idx,
 {
 	struct hinic_rss_template_key temp_key = { 0 };
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
+	u16 out_size = sizeof(temp_key);
 	struct hinic_hwif *hwif;
 	struct pci_dev *pdev;
-	u16 out_size = sizeof(temp_key);
 	int err;
 
 	if (!hwdev || !temp)
@@ -844,7 +848,7 @@ int hinic_rss_set_hash_engine(struct hinic_dev *nic_dev, u8 template_id,
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
+	u16 out_size = sizeof(rss_engine);
 	int err;
 
 	rss_engine.func_id = HINIC_HWIF_FUNC_IDX(hwif);
@@ -868,9 +872,9 @@ int hinic_rss_get_hash_engine(struct hinic_dev *nic_dev, u8 tmpl_idx, u8 *type)
 {
 	struct hinic_rss_engine_type hash_type = { 0 };
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
+	u16 out_size = sizeof(hash_type);
 	struct hinic_hwif *hwif;
 	struct pci_dev *pdev;
-	u16 out_size = sizeof(hash_type);
 	int err;
 
 	if (!hwdev || !type)
@@ -901,7 +905,7 @@ int hinic_rss_cfg(struct hinic_dev *nic_dev, u8 rss_en, u8 template_id)
 	struct hinic_rss_config rss_cfg = { 0 };
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
+	u16 out_size = sizeof(rss_cfg);
 	int err;
 
 	rss_cfg.func_id = HINIC_HWIF_FUNC_IDX(hwif);
@@ -927,8 +931,8 @@ int hinic_rss_template_alloc(struct hinic_dev *nic_dev, u8 *tmpl_idx)
 	struct hinic_rss_template_mgmt template_mgmt = { 0 };
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_hwif *hwif = hwdev->hwif;
+	u16 out_size = sizeof(template_mgmt);
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
 	int err;
 
 	template_mgmt.func_id = HINIC_HWIF_FUNC_IDX(hwif);
@@ -953,8 +957,8 @@ int hinic_rss_template_free(struct hinic_dev *nic_dev, u8 tmpl_idx)
 	struct hinic_rss_template_mgmt template_mgmt = { 0 };
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_hwif *hwif = hwdev->hwif;
+	u16 out_size = sizeof(template_mgmt);
 	struct pci_dev *pdev = hwif->pdev;
-	u16 out_size;
 	int err;
 
 	template_mgmt.func_id = HINIC_HWIF_FUNC_IDX(hwif);
@@ -1043,9 +1047,9 @@ int hinic_get_mgmt_version(struct hinic_dev *nic_dev, u8 *mgmt_ver)
 {
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_version_info up_ver = {0};
+	u16 out_size = sizeof(up_ver);
 	struct hinic_hwif *hwif;
 	struct pci_dev *pdev;
-	u16 out_size;
 	int err;
 
 	if (!hwdev)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_port.h b/drivers/net/ethernet/huawei/hinic/hinic_port.h
index 44772fd47fc1..5ad04fb6722a 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_port.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_port.h
@@ -148,9 +148,9 @@ struct hinic_port_link_status {
 	u8      version;
 	u8      rsvd0[6];
 
-	u16     rsvd1;
+	u16     func_id;
 	u8      link;
-	u8      rsvd2;
+	u8      port_id;
 };
 
 struct hinic_port_func_state_cmd {
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_rx.c b/drivers/net/ethernet/huawei/hinic/hinic_rx.c
index 815649e37cb1..af20d0dd6de7 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_rx.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_rx.c
@@ -432,9 +432,11 @@ static int rx_poll(struct napi_struct *napi, int budget)
 		return budget;
 
 	napi_complete(napi);
-	hinic_hwdev_set_msix_state(nic_dev->hwdev,
-				   rq->msix_entry,
-				   HINIC_MSIX_ENABLE);
+
+	if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+		hinic_hwdev_set_msix_state(nic_dev->hwdev,
+					   rq->msix_entry,
+					   HINIC_MSIX_ENABLE);
 
 	return pkts;
 }
@@ -461,9 +463,10 @@ static irqreturn_t rx_irq(int irq, void *data)
 
 	/* Disable the interrupt until napi will be completed */
 	nic_dev = netdev_priv(rxq->netdev);
-	hinic_hwdev_set_msix_state(nic_dev->hwdev,
-				   rq->msix_entry,
-				   HINIC_MSIX_DISABLE);
+	if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+		hinic_hwdev_set_msix_state(nic_dev->hwdev,
+					   rq->msix_entry,
+					   HINIC_MSIX_DISABLE);
 
 	nic_dev = netdev_priv(rxq->netdev);
 	hinic_hwdev_msix_cnt_set(nic_dev->hwdev, rq->msix_entry);
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
new file mode 100644
index 000000000000..b24788e9733c
--- /dev/null
+++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
@@ -0,0 +1,1016 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Huawei HiNIC PCI Express Linux driver
+ * Copyright(c) 2017 Huawei Technologies Co., Ltd
+ */
+
+#include <linux/pci.h>
+#include <linux/if_vlan.h>
+#include <linux/interrupt.h>
+#include <linux/etherdevice.h>
+#include <linux/netdevice.h>
+
+#include "hinic_hw_dev.h"
+#include "hinic_dev.h"
+#include "hinic_hw_mbox.h"
+#include "hinic_hw_cmdq.h"
+#include "hinic_port.h"
+#include "hinic_sriov.h"
+
+static unsigned char set_vf_link_state;
+module_param(set_vf_link_state, byte, 0444);
+MODULE_PARM_DESC(set_vf_link_state, "Set vf link state, 0 represents link auto, 1 represents link always up, 2 represents link always down. - default is 0.");
+
+#define HINIC_VLAN_PRIORITY_SHIFT 13
+#define HINIC_ADD_VLAN_IN_MAC 0x8000
+
+int hinic_set_mac(struct hinic_hwdev *hwdev, const u8 *mac_addr, u16 vlan_id,
+		  u16 func_id)
+{
+	struct hinic_port_mac_cmd mac_info = {0};
+	u16 out_size = sizeof(mac_info);
+	int err;
+
+	mac_info.func_idx = func_id;
+	mac_info.vlan_id = vlan_id;
+	memcpy(mac_info.mac, mac_addr, ETH_ALEN);
+
+	err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_SET_MAC, &mac_info,
+				 sizeof(mac_info), &mac_info, &out_size);
+	if (err || out_size != sizeof(mac_info) ||
+	    (mac_info.status && mac_info.status != HINIC_PF_SET_VF_ALREADY &&
+	    mac_info.status != HINIC_MGMT_STATUS_EXIST)) {
+		dev_err(&hwdev->func_to_io.hwif->pdev->dev, "Failed to change MAC, ret = %d\n",
+			mac_info.status);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static void hinic_notify_vf_link_status(struct hinic_hwdev *hwdev, u16 vf_id,
+					u8 link_status)
+{
+	struct vf_data_storage *vf_infos = hwdev->func_to_io.vf_infos;
+	struct hinic_port_link_status link = {0};
+	u16 out_size = sizeof(link);
+	int err;
+
+	if (vf_infos[HW_VF_ID_TO_OS(vf_id)].registered) {
+		link.link = link_status;
+		link.func_id = hinic_glb_pf_vf_offset(hwdev->hwif) + vf_id;
+		err = hinic_mbox_to_vf(hwdev, HINIC_MOD_L2NIC,
+				       vf_id, HINIC_PORT_CMD_LINK_STATUS_REPORT,
+				       &link, sizeof(link),
+				       &link, &out_size, 0);
+		if (err || !out_size || link.status)
+			dev_err(&hwdev->hwif->pdev->dev,
+				"Send link change event to VF %d failed, err: %d, status: 0x%x, out_size: 0x%x\n",
+				HW_VF_ID_TO_OS(vf_id), err,
+				link.status, out_size);
+	}
+}
+
+/* send link change event mbox msg to active vfs under the pf */
+void hinic_notify_all_vfs_link_changed(struct hinic_hwdev *hwdev,
+				       u8 link_status)
+{
+	struct hinic_func_to_io *nic_io = &hwdev->func_to_io;
+	u16 i;
+
+	nic_io->link_status = link_status;
+	for (i = 1; i <= nic_io->max_vfs; i++) {
+		if (!nic_io->vf_infos[HW_VF_ID_TO_OS(i)].link_forced)
+			hinic_notify_vf_link_status(hwdev, i,  link_status);
+	}
+}
+
+u16 hinic_vf_info_vlanprio(struct hinic_hwdev *hwdev, int vf_id)
+{
+	struct hinic_func_to_io *nic_io = &hwdev->func_to_io;
+	u16 pf_vlan, vlanprio;
+	u8 pf_qos;
+
+	pf_vlan = nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].pf_vlan;
+	pf_qos = nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].pf_qos;
+	vlanprio = pf_vlan | pf_qos << HINIC_VLAN_PRIORITY_SHIFT;
+
+	return vlanprio;
+}
+
+int hinic_set_vf_vlan(struct hinic_hwdev *hwdev, bool add, u16 vid,
+		      u8 qos, int vf_id)
+{
+	struct hinic_vf_vlan_config vf_vlan = {0};
+	u16 out_size = sizeof(vf_vlan);
+	int err;
+	u8 cmd;
+
+	/* VLAN 0 is a special case, don't allow it to be removed */
+	if (!vid && !add)
+		return 0;
+
+	vf_vlan.func_id = hinic_glb_pf_vf_offset(hwdev->hwif) + vf_id;
+	vf_vlan.vlan_id = vid;
+	vf_vlan.qos = qos;
+
+	if (add)
+		cmd = HINIC_PORT_CMD_SET_VF_VLAN;
+	else
+		cmd = HINIC_PORT_CMD_CLR_VF_VLAN;
+
+	err = hinic_port_msg_cmd(hwdev, cmd, &vf_vlan,
+				 sizeof(vf_vlan), &vf_vlan, &out_size);
+	if (err || !out_size || vf_vlan.status) {
+		dev_err(&hwdev->hwif->pdev->dev, "Failed to set VF %d vlan, err: %d, status: 0x%x, out size: 0x%x\n",
+			HW_VF_ID_TO_OS(vf_id), err, vf_vlan.status, out_size);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int hinic_init_vf_config(struct hinic_hwdev *hwdev, u16 vf_id)
+{
+	struct vf_data_storage *vf_info;
+	u16 func_id, vlan_id;
+	int err = 0;
+
+	vf_info = hwdev->func_to_io.vf_infos + HW_VF_ID_TO_OS(vf_id);
+	if (vf_info->pf_set_mac) {
+		func_id = hinic_glb_pf_vf_offset(hwdev->hwif) + vf_id;
+
+		vlan_id = 0;
+
+		err = hinic_set_mac(hwdev, vf_info->vf_mac_addr, vlan_id,
+				    func_id);
+		if (err) {
+			dev_err(&hwdev->func_to_io.hwif->pdev->dev, "Failed to set VF %d MAC\n",
+				HW_VF_ID_TO_OS(vf_id));
+			return err;
+		}
+	}
+
+	if (hinic_vf_info_vlanprio(hwdev, vf_id)) {
+		err = hinic_set_vf_vlan(hwdev, true, vf_info->pf_vlan,
+					vf_info->pf_qos, vf_id);
+		if (err) {
+			dev_err(&hwdev->hwif->pdev->dev, "Failed to add VF %d VLAN_QOS\n",
+				HW_VF_ID_TO_OS(vf_id));
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+int hinic_register_vf_msg_handler(void *hwdev, u16 vf_id,
+				  void *buf_in, u16 in_size,
+				  void *buf_out, u16 *out_size)
+{
+	struct hinic_register_vf *register_info = buf_out;
+	struct hinic_hwdev *hw_dev = hwdev;
+	struct hinic_func_to_io *nic_io;
+	int err;
+
+	nic_io = &hw_dev->func_to_io;
+	if (vf_id > nic_io->max_vfs) {
+		dev_err(&hw_dev->hwif->pdev->dev, "Register VF id %d exceed limit[0-%d]\n",
+			HW_VF_ID_TO_OS(vf_id), HW_VF_ID_TO_OS(nic_io->max_vfs));
+		register_info->status = EFAULT;
+		return -EFAULT;
+	}
+
+	*out_size = sizeof(*register_info);
+	err = hinic_init_vf_config(hw_dev, vf_id);
+	if (err) {
+		register_info->status = EFAULT;
+		return err;
+	}
+
+	nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].registered = true;
+
+	return 0;
+}
+
+int hinic_unregister_vf_msg_handler(void *hwdev, u16 vf_id,
+				    void *buf_in, u16 in_size,
+				    void *buf_out, u16 *out_size)
+{
+	struct hinic_hwdev *hw_dev = hwdev;
+	struct hinic_func_to_io *nic_io;
+
+	nic_io = &hw_dev->func_to_io;
+	*out_size = 0;
+	if (vf_id > nic_io->max_vfs)
+		return 0;
+
+	nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].registered = false;
+
+	return 0;
+}
+
+int hinic_change_vf_mtu_msg_handler(void *hwdev, u16 vf_id,
+				    void *buf_in, u16 in_size,
+				    void *buf_out, u16 *out_size)
+{
+	struct hinic_hwdev *hw_dev = hwdev;
+	int err;
+
+	err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_CHANGE_MTU, buf_in,
+				 in_size, buf_out, out_size);
+	if (err) {
+		dev_err(&hw_dev->hwif->pdev->dev, "Failed to set VF %u mtu\n",
+			vf_id);
+		return err;
+	}
+
+	return 0;
+}
+
+int hinic_get_vf_mac_msg_handler(void *hwdev, u16 vf_id,
+				 void *buf_in, u16 in_size,
+				 void *buf_out, u16 *out_size)
+{
+	struct hinic_port_mac_cmd *mac_info = buf_out;
+	struct hinic_hwdev *dev = hwdev;
+	struct hinic_func_to_io *nic_io;
+	struct vf_data_storage *vf_info;
+
+	nic_io = &dev->func_to_io;
+	vf_info = nic_io->vf_infos + HW_VF_ID_TO_OS(vf_id);
+
+	memcpy(mac_info->mac, vf_info->vf_mac_addr, ETH_ALEN);
+	mac_info->status = 0;
+	*out_size = sizeof(*mac_info);
+
+	return 0;
+}
+
+int hinic_set_vf_mac_msg_handler(void *hwdev, u16 vf_id,
+				 void *buf_in, u16 in_size,
+				 void *buf_out, u16 *out_size)
+{
+	struct hinic_port_mac_cmd *mac_out = buf_out;
+	struct hinic_port_mac_cmd *mac_in = buf_in;
+	struct hinic_hwdev *hw_dev = hwdev;
+	struct hinic_func_to_io *nic_io;
+	struct vf_data_storage *vf_info;
+	int err;
+
+	nic_io =  &hw_dev->func_to_io;
+	vf_info = nic_io->vf_infos + HW_VF_ID_TO_OS(vf_id);
+	if (vf_info->pf_set_mac && !(vf_info->trust) &&
+	    is_valid_ether_addr(mac_in->mac)) {
+		dev_warn(&hw_dev->hwif->pdev->dev, "PF has already set VF %d MAC address\n",
+			 HW_VF_ID_TO_OS(vf_id));
+		mac_out->status = HINIC_PF_SET_VF_ALREADY;
+		*out_size = sizeof(*mac_out);
+		return 0;
+	}
+
+	err = hinic_port_msg_cmd(hw_dev, HINIC_PORT_CMD_SET_MAC, buf_in,
+				 in_size, buf_out, out_size);
+	if ((err &&  err != HINIC_MBOX_PF_BUSY_ACTIVE_FW) || !(*out_size)) {
+		dev_err(&hw_dev->hwif->pdev->dev,
+			"Failed to set VF %d MAC address, err: %d, status: 0x%x, out size: 0x%x\n",
+			HW_VF_ID_TO_OS(vf_id), err, mac_out->status, *out_size);
+		return -EFAULT;
+	}
+
+	return err;
+}
+
+int hinic_del_vf_mac_msg_handler(void *hwdev, u16 vf_id,
+				 void *buf_in, u16 in_size,
+				 void *buf_out, u16 *out_size)
+{
+	struct hinic_port_mac_cmd *mac_out = buf_out;
+	struct hinic_port_mac_cmd *mac_in = buf_in;
+	struct hinic_hwdev *hw_dev = hwdev;
+	struct hinic_func_to_io *nic_io;
+	struct vf_data_storage *vf_info;
+	int err;
+
+	nic_io = &hw_dev->func_to_io;
+	vf_info = nic_io->vf_infos + HW_VF_ID_TO_OS(vf_id);
+	if (vf_info->pf_set_mac  && is_valid_ether_addr(mac_in->mac) &&
+	    !memcmp(vf_info->vf_mac_addr, mac_in->mac, ETH_ALEN)) {
+		dev_warn(&hw_dev->hwif->pdev->dev, "PF has already set VF mac.\n");
+		mac_out->status = HINIC_PF_SET_VF_ALREADY;
+		*out_size = sizeof(*mac_out);
+		return 0;
+	}
+
+	err = hinic_port_msg_cmd(hw_dev, HINIC_PORT_CMD_DEL_MAC, buf_in,
+				 in_size, buf_out, out_size);
+	if ((err && err != HINIC_MBOX_PF_BUSY_ACTIVE_FW) || !(*out_size)) {
+		dev_err(&hw_dev->hwif->pdev->dev, "Failed to delete VF %d MAC, err: %d, status: 0x%x, out size: 0x%x\n",
+			HW_VF_ID_TO_OS(vf_id), err, mac_out->status, *out_size);
+		return -EFAULT;
+	}
+
+	return err;
+}
+
+int hinic_get_vf_link_status_msg_handler(void *hwdev, u16 vf_id,
+					 void *buf_in, u16 in_size,
+					 void *buf_out, u16 *out_size)
+{
+	struct hinic_port_link_cmd *get_link = buf_out;
+	struct hinic_hwdev *hw_dev = hwdev;
+	struct vf_data_storage *vf_infos;
+	struct hinic_func_to_io *nic_io;
+	bool link_forced, link_up;
+
+	nic_io = &hw_dev->func_to_io;
+	vf_infos = nic_io->vf_infos;
+	link_forced = vf_infos[HW_VF_ID_TO_OS(vf_id)].link_forced;
+	link_up = vf_infos[HW_VF_ID_TO_OS(vf_id)].link_up;
+
+	if (link_forced)
+		get_link->state = link_up ?
+			HINIC_LINK_STATE_UP : HINIC_LINK_STATE_DOWN;
+	else
+		get_link->state = nic_io->link_status;
+
+	get_link->status = 0;
+	*out_size = sizeof(*get_link);
+
+	return 0;
+}
+
+struct vf_cmd_msg_handle nic_vf_cmd_msg_handler[] = {
+	{HINIC_PORT_CMD_VF_REGISTER, hinic_register_vf_msg_handler},
+	{HINIC_PORT_CMD_VF_UNREGISTER, hinic_unregister_vf_msg_handler},
+	{HINIC_PORT_CMD_CHANGE_MTU, hinic_change_vf_mtu_msg_handler},
+	{HINIC_PORT_CMD_GET_MAC, hinic_get_vf_mac_msg_handler},
+	{HINIC_PORT_CMD_SET_MAC, hinic_set_vf_mac_msg_handler},
+	{HINIC_PORT_CMD_DEL_MAC, hinic_del_vf_mac_msg_handler},
+	{HINIC_PORT_CMD_GET_LINK_STATE, hinic_get_vf_link_status_msg_handler},
+};
+
+#define CHECK_IPSU_15BIT	0X8000
+
+struct hinic_sriov_info *hinic_get_sriov_info_by_pcidev(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+
+	return &nic_dev->sriov_info;
+}
+
+static int hinic_check_mac_info(u8 status, u16 vlan_id)
+{
+	if ((status && status != HINIC_MGMT_STATUS_EXIST &&
+	     status != HINIC_PF_SET_VF_ALREADY) ||
+	    (vlan_id & CHECK_IPSU_15BIT &&
+	     status == HINIC_MGMT_STATUS_EXIST))
+		return -EINVAL;
+
+	return 0;
+}
+
+#define HINIC_VLAN_ID_MASK	0x7FFF
+
+int hinic_update_mac(struct hinic_hwdev *hwdev, u8 *old_mac, u8 *new_mac,
+		     u16 vlan_id, u16 func_id)
+{
+	struct hinic_port_mac_update mac_info = {0};
+	u16 out_size = sizeof(mac_info);
+	int err;
+
+	if (!hwdev || !old_mac || !new_mac)
+		return -EINVAL;
+
+	if ((vlan_id & HINIC_VLAN_ID_MASK) >= VLAN_N_VID) {
+		dev_err(&hwdev->hwif->pdev->dev, "Invalid VLAN number: %d\n",
+			(vlan_id & HINIC_VLAN_ID_MASK));
+		return -EINVAL;
+	}
+
+	mac_info.func_id = func_id;
+	mac_info.vlan_id = vlan_id;
+	memcpy(mac_info.old_mac, old_mac, ETH_ALEN);
+	memcpy(mac_info.new_mac, new_mac, ETH_ALEN);
+
+	err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_UPDATE_MAC, &mac_info,
+				 sizeof(mac_info), &mac_info, &out_size);
+
+	if (err || !out_size ||
+	    hinic_check_mac_info(mac_info.status, mac_info.vlan_id)) {
+		dev_err(&hwdev->hwif->pdev->dev,
+			"Failed to update MAC, err: %d, status: 0x%x, out size: 0x%x\n",
+			err, mac_info.status, out_size);
+		return -EINVAL;
+	}
+
+	if (mac_info.status == HINIC_PF_SET_VF_ALREADY) {
+		dev_warn(&hwdev->hwif->pdev->dev,
+			 "PF has already set VF MAC. Ignore update operation\n");
+		return HINIC_PF_SET_VF_ALREADY;
+	}
+
+	if (mac_info.status == HINIC_MGMT_STATUS_EXIST)
+		dev_warn(&hwdev->hwif->pdev->dev, "MAC is repeated. Ignore update operation\n");
+
+	return 0;
+}
+
+void hinic_get_vf_config(struct hinic_hwdev *hwdev, u16 vf_id,
+			 struct ifla_vf_info *ivi)
+{
+	struct vf_data_storage *vfinfo;
+
+	vfinfo = hwdev->func_to_io.vf_infos + HW_VF_ID_TO_OS(vf_id);
+
+	ivi->vf = HW_VF_ID_TO_OS(vf_id);
+	memcpy(ivi->mac, vfinfo->vf_mac_addr, ETH_ALEN);
+	ivi->vlan = vfinfo->pf_vlan;
+	ivi->qos = vfinfo->pf_qos;
+	ivi->spoofchk = vfinfo->spoofchk;
+	ivi->trusted = vfinfo->trust;
+	ivi->max_tx_rate = vfinfo->max_rate;
+	ivi->min_tx_rate = vfinfo->min_rate;
+
+	if (!vfinfo->link_forced)
+		ivi->linkstate = IFLA_VF_LINK_STATE_AUTO;
+	else if (vfinfo->link_up)
+		ivi->linkstate = IFLA_VF_LINK_STATE_ENABLE;
+	else
+		ivi->linkstate = IFLA_VF_LINK_STATE_DISABLE;
+}
+
+int hinic_ndo_get_vf_config(struct net_device *netdev,
+			    int vf, struct ifla_vf_info *ivi)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	struct hinic_sriov_info *sriov_info;
+
+	sriov_info = &nic_dev->sriov_info;
+	if (vf >= sriov_info->num_vfs)
+		return -EINVAL;
+
+	hinic_get_vf_config(sriov_info->hwdev, OS_VF_ID_TO_HW(vf), ivi);
+
+	return 0;
+}
+
+int hinic_set_vf_mac(struct hinic_hwdev *hwdev, int vf, unsigned char *mac_addr)
+{
+	struct hinic_func_to_io *nic_io = &hwdev->func_to_io;
+	struct vf_data_storage *vf_info;
+	u16 func_id;
+	int err;
+
+	vf_info = nic_io->vf_infos + HW_VF_ID_TO_OS(vf);
+
+	/* duplicate request, so just return success */
+	if (vf_info->pf_set_mac &&
+	    !memcmp(vf_info->vf_mac_addr, mac_addr, ETH_ALEN))
+		return 0;
+
+	vf_info->pf_set_mac = true;
+
+	func_id = hinic_glb_pf_vf_offset(hwdev->hwif) + vf;
+	err = hinic_update_mac(hwdev, vf_info->vf_mac_addr,
+			       mac_addr, 0, func_id);
+	if (err) {
+		vf_info->pf_set_mac = false;
+		return err;
+	}
+
+	memcpy(vf_info->vf_mac_addr, mac_addr, ETH_ALEN);
+
+	return 0;
+}
+
+int hinic_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	struct hinic_sriov_info *sriov_info;
+	int err;
+
+	sriov_info = &nic_dev->sriov_info;
+	if (!is_valid_ether_addr(mac) || vf >= sriov_info->num_vfs)
+		return -EINVAL;
+
+	err = hinic_set_vf_mac(sriov_info->hwdev, OS_VF_ID_TO_HW(vf), mac);
+	if (err)
+		return err;
+
+	netif_info(nic_dev, drv, netdev, "Setting MAC %pM on VF %d\n", mac, vf);
+	netif_info(nic_dev, drv, netdev, "Reload the VF driver to make this change effective.");
+
+	return 0;
+}
+
+int hinic_add_vf_vlan(struct hinic_hwdev *hwdev, int vf_id, u16 vlan, u8 qos)
+{
+	struct hinic_func_to_io *nic_io = &hwdev->func_to_io;
+	int err;
+
+	err = hinic_set_vf_vlan(hwdev, true, vlan, qos, vf_id);
+	if (err)
+		return err;
+
+	nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].pf_vlan = vlan;
+	nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].pf_qos = qos;
+
+	dev_info(&hwdev->hwif->pdev->dev, "Setting VLAN %d, QOS 0x%x on VF %d\n",
+		 vlan, qos, HW_VF_ID_TO_OS(vf_id));
+	return 0;
+}
+
+int hinic_kill_vf_vlan(struct hinic_hwdev *hwdev, int vf_id)
+{
+	struct hinic_func_to_io *nic_io = &hwdev->func_to_io;
+	int err;
+
+	err = hinic_set_vf_vlan(hwdev, false,
+				nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].pf_vlan,
+				nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].pf_qos,
+				vf_id);
+	if (err)
+		return err;
+
+	dev_info(&hwdev->hwif->pdev->dev, "Remove VLAN %d on VF %d\n",
+		 nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].pf_vlan,
+		 HW_VF_ID_TO_OS(vf_id));
+
+	nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].pf_vlan = 0;
+	nic_io->vf_infos[HW_VF_ID_TO_OS(vf_id)].pf_qos = 0;
+
+	return 0;
+}
+
+int hinic_update_mac_vlan(struct hinic_dev *nic_dev, u16 old_vlan, u16 new_vlan,
+			  int vf_id)
+{
+	struct vf_data_storage *vf_info;
+	u16 vlan_id;
+	int err;
+
+	if (!nic_dev || old_vlan >= VLAN_N_VID || new_vlan >= VLAN_N_VID)
+		return -EINVAL;
+
+	vf_info = nic_dev->hwdev->func_to_io.vf_infos + HW_VF_ID_TO_OS(vf_id);
+	if (!vf_info->pf_set_mac)
+		return 0;
+
+	vlan_id = old_vlan;
+	if (vlan_id)
+		vlan_id |= HINIC_ADD_VLAN_IN_MAC;
+
+	err = hinic_port_del_mac(nic_dev, vf_info->vf_mac_addr, vlan_id);
+	if (err) {
+		dev_err(&nic_dev->hwdev->hwif->pdev->dev, "Failed to delete VF %d MAC %pM vlan %d\n",
+			HW_VF_ID_TO_OS(vf_id), vf_info->vf_mac_addr, old_vlan);
+		return err;
+	}
+
+	vlan_id = new_vlan;
+	if (vlan_id)
+		vlan_id |= HINIC_ADD_VLAN_IN_MAC;
+
+	err = hinic_port_add_mac(nic_dev, vf_info->vf_mac_addr, vlan_id);
+	if (err) {
+		dev_err(&nic_dev->hwdev->hwif->pdev->dev, "Failed to add VF %d MAC %pM vlan %d\n",
+			HW_VF_ID_TO_OS(vf_id), vf_info->vf_mac_addr, new_vlan);
+		goto out;
+	}
+
+	return 0;
+
+out:
+	vlan_id = old_vlan;
+	if (vlan_id)
+		vlan_id |= HINIC_ADD_VLAN_IN_MAC;
+	hinic_port_add_mac(nic_dev, vf_info->vf_mac_addr, vlan_id);
+
+	return err;
+}
+
+static int set_hw_vf_vlan(struct hinic_dev *nic_dev,
+			  u16 cur_vlanprio, int vf, u16 vlan, u8 qos)
+{
+	u16 old_vlan = cur_vlanprio & VLAN_VID_MASK;
+	int err = 0;
+
+	if (vlan || qos) {
+		if (cur_vlanprio) {
+			err = hinic_kill_vf_vlan(nic_dev->hwdev,
+						 OS_VF_ID_TO_HW(vf));
+			if (err) {
+				dev_err(&nic_dev->sriov_info.pdev->dev, "Failed to delete vf %d old vlan %d\n",
+					vf, old_vlan);
+				goto out;
+			}
+		}
+		err = hinic_add_vf_vlan(nic_dev->hwdev,
+					OS_VF_ID_TO_HW(vf), vlan, qos);
+		if (err) {
+			dev_err(&nic_dev->sriov_info.pdev->dev, "Failed to add vf %d new vlan %d\n",
+				vf, vlan);
+			goto out;
+		}
+	} else {
+		err = hinic_kill_vf_vlan(nic_dev->hwdev, OS_VF_ID_TO_HW(vf));
+		if (err) {
+			dev_err(&nic_dev->sriov_info.pdev->dev, "Failed to delete vf %d vlan %d\n",
+				vf, old_vlan);
+			goto out;
+		}
+	}
+
+	err = hinic_update_mac_vlan(nic_dev, old_vlan, vlan,
+				    OS_VF_ID_TO_HW(vf));
+
+out:
+	return err;
+}
+
+int hinic_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos,
+			  __be16 vlan_proto)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	struct hinic_sriov_info *sriov_info;
+	u16 vlanprio, cur_vlanprio;
+
+	sriov_info = &nic_dev->sriov_info;
+	if (vf >= sriov_info->num_vfs || vlan > 4095 || qos > 7)
+		return -EINVAL;
+	if (vlan_proto != htons(ETH_P_8021Q))
+		return -EPROTONOSUPPORT;
+	vlanprio = vlan | qos << HINIC_VLAN_PRIORITY_SHIFT;
+	cur_vlanprio = hinic_vf_info_vlanprio(nic_dev->hwdev,
+					      OS_VF_ID_TO_HW(vf));
+	/* duplicate request, so just return success */
+	if (vlanprio == cur_vlanprio)
+		return 0;
+
+	return set_hw_vf_vlan(nic_dev, cur_vlanprio, vf, vlan, qos);
+}
+
+int hinic_set_vf_trust(struct hinic_hwdev *hwdev, u16 vf_id, bool trust)
+{
+	struct vf_data_storage *vf_infos;
+	struct hinic_func_to_io *nic_io;
+
+	if (!hwdev)
+		return -EINVAL;
+
+	nic_io = &hwdev->func_to_io;
+	vf_infos = nic_io->vf_infos;
+	vf_infos[vf_id].trust = trust;
+
+	return 0;
+}
+
+int hinic_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting)
+{
+	struct hinic_dev *adapter = netdev_priv(netdev);
+	struct hinic_sriov_info *sriov_info;
+	struct hinic_func_to_io *nic_io;
+	bool cur_trust;
+	int err;
+
+	sriov_info = &adapter->sriov_info;
+	nic_io = &adapter->hwdev->func_to_io;
+
+	if (vf >= sriov_info->num_vfs)
+		return -EINVAL;
+
+	cur_trust = nic_io->vf_infos[vf].trust;
+	/* same request, so just return success */
+	if ((setting && cur_trust) || (!setting && !cur_trust))
+		return 0;
+
+	err = hinic_set_vf_trust(adapter->hwdev, vf, setting);
+	if (!err)
+		dev_info(&sriov_info->pdev->dev, "Set VF %d trusted %s succeed\n",
+			 vf, setting ? "on" : "off");
+	else
+		dev_err(&sriov_info->pdev->dev, "Failed set VF %d trusted %s\n",
+			vf, setting ? "on" : "off");
+
+	return err;
+}
+
+/* pf receive message from vf */
+int nic_pf_mbox_handler(void *hwdev, u16 vf_id, u8 cmd, void *buf_in,
+			u16 in_size, void *buf_out, u16 *out_size)
+{
+	struct vf_cmd_msg_handle *vf_msg_handle;
+	struct hinic_hwdev *dev = hwdev;
+	struct hinic_func_to_io *nic_io;
+	struct hinic_pfhwdev *pfhwdev;
+	u32 i, cmd_number;
+	int err = 0;
+
+	if (!hwdev)
+		return -EFAULT;
+
+	cmd_number = sizeof(nic_vf_cmd_msg_handler) /
+			    sizeof(struct vf_cmd_msg_handle);
+	pfhwdev = container_of(dev, struct hinic_pfhwdev, hwdev);
+	nic_io = &dev->func_to_io;
+	for (i = 0; i < cmd_number; i++) {
+		vf_msg_handle = &nic_vf_cmd_msg_handler[i];
+		if (cmd == vf_msg_handle->cmd &&
+		    vf_msg_handle->cmd_msg_handler) {
+			err = vf_msg_handle->cmd_msg_handler(hwdev, vf_id,
+							     buf_in, in_size,
+							     buf_out,
+							     out_size);
+			break;
+		}
+	}
+	if (i == cmd_number)
+		err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_L2NIC,
+					cmd, buf_in, in_size, buf_out,
+					out_size, HINIC_MGMT_MSG_SYNC);
+
+	if (err &&  err != HINIC_MBOX_PF_BUSY_ACTIVE_FW)
+		dev_err(&nic_io->hwif->pdev->dev, "PF receive VF L2NIC cmd: %d process error, err:%d\n",
+			cmd, err);
+	return err;
+}
+
+static int cfg_mbx_pf_proc_vf_msg(void *hwdev, u16 vf_id, u8 cmd, void *buf_in,
+				  u16 in_size, void *buf_out, u16 *out_size)
+{
+	struct hinic_dev_cap *dev_cap = buf_out;
+	struct hinic_hwdev *dev = hwdev;
+	struct hinic_cap *cap;
+
+	cap = &dev->nic_cap;
+	memset(dev_cap, 0, sizeof(*dev_cap));
+
+	dev_cap->max_vf = cap->max_vf;
+	dev_cap->max_sqs = cap->max_vf_qps;
+	dev_cap->max_rqs = cap->max_vf_qps;
+
+	*out_size = sizeof(*dev_cap);
+
+	return 0;
+}
+
+static int hinic_init_vf_infos(struct hinic_func_to_io *nic_io, u16 vf_id)
+{
+	struct vf_data_storage *vf_infos = nic_io->vf_infos;
+
+	if (set_vf_link_state > HINIC_IFLA_VF_LINK_STATE_DISABLE) {
+		dev_warn(&nic_io->hwif->pdev->dev, "Module Parameter set_vf_link_state value %d is out of range, resetting to %d\n",
+			 set_vf_link_state, HINIC_IFLA_VF_LINK_STATE_AUTO);
+		set_vf_link_state = HINIC_IFLA_VF_LINK_STATE_AUTO;
+	}
+
+	switch (set_vf_link_state) {
+	case HINIC_IFLA_VF_LINK_STATE_AUTO:
+		vf_infos[vf_id].link_forced = false;
+		break;
+	case HINIC_IFLA_VF_LINK_STATE_ENABLE:
+		vf_infos[vf_id].link_forced = true;
+		vf_infos[vf_id].link_up = true;
+		break;
+	case HINIC_IFLA_VF_LINK_STATE_DISABLE:
+		vf_infos[vf_id].link_forced = true;
+		vf_infos[vf_id].link_up = false;
+		break;
+	default:
+		dev_err(&nic_io->hwif->pdev->dev, "Invalid input parameter set_vf_link_state: %d\n",
+			set_vf_link_state);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void hinic_clear_vf_infos(struct hinic_dev *nic_dev, u16 vf_id)
+{
+	struct vf_data_storage *vf_infos;
+	u16 func_id;
+
+	func_id = hinic_glb_pf_vf_offset(nic_dev->hwdev->hwif) + vf_id;
+	vf_infos = nic_dev->hwdev->func_to_io.vf_infos + HW_VF_ID_TO_OS(vf_id);
+	if (vf_infos->pf_set_mac)
+		hinic_port_del_mac(nic_dev, vf_infos->vf_mac_addr, 0);
+
+	if (hinic_vf_info_vlanprio(nic_dev->hwdev, vf_id))
+		hinic_kill_vf_vlan(nic_dev->hwdev, vf_id);
+
+	if (vf_infos->trust)
+		hinic_set_vf_trust(nic_dev->hwdev, vf_id, false);
+
+	memset(vf_infos, 0, sizeof(*vf_infos));
+	/* set vf_infos to default */
+	hinic_init_vf_infos(&nic_dev->hwdev->func_to_io, HW_VF_ID_TO_OS(vf_id));
+}
+
+int hinic_deinit_vf_hw(struct hinic_sriov_info *sriov_info, u16 start_vf_id,
+		       u16 end_vf_id)
+{
+	struct hinic_dev *nic_dev;
+	u16 func_idx, idx;
+
+	nic_dev = container_of(sriov_info, struct hinic_dev, sriov_info);
+
+	for (idx = start_vf_id; idx <= end_vf_id; idx++) {
+		func_idx = hinic_glb_pf_vf_offset(nic_dev->hwdev->hwif) + idx;
+		hinic_set_wq_page_size(nic_dev->hwdev, func_idx,
+				       HINIC_HW_WQ_PAGE_SIZE);
+		hinic_clear_vf_infos(nic_dev, idx);
+	}
+
+	return 0;
+}
+
+int hinic_vf_func_init(struct hinic_hwdev *hwdev)
+{
+	struct hinic_register_vf register_info = {0};
+	u16 out_size = sizeof(register_info);
+	struct hinic_func_to_io *nic_io;
+	int err = 0;
+	u32 size, i;
+
+	nic_io = &hwdev->func_to_io;
+
+	if (HINIC_IS_VF(hwdev->hwif)) {
+		err = hinic_mbox_to_pf(hwdev, HINIC_MOD_L2NIC,
+				       HINIC_PORT_CMD_VF_REGISTER,
+				       &register_info, sizeof(register_info),
+				       &register_info, &out_size, 0);
+		if (err || register_info.status || !out_size) {
+			dev_err(&hwdev->hwif->pdev->dev,
+				"Failed to register VF, err: %d, status: 0x%x, out size: 0x%x\n",
+				err, register_info.status, out_size);
+			hinic_unregister_vf_mbox_cb(hwdev, HINIC_MOD_L2NIC);
+			return -EIO;
+		}
+	} else {
+		err = hinic_register_pf_mbox_cb(hwdev, HINIC_MOD_CFGM,
+						cfg_mbx_pf_proc_vf_msg);
+		if (err) {
+			dev_err(&hwdev->hwif->pdev->dev,
+				"Register PF mailbox callback failed\n");
+			return err;
+		}
+		nic_io->max_vfs = hwdev->nic_cap.max_vf;
+		size = sizeof(*nic_io->vf_infos) * nic_io->max_vfs;
+		if (size != 0) {
+			nic_io->vf_infos = kzalloc(size, GFP_KERNEL);
+			if (!nic_io->vf_infos) {
+				err = -ENOMEM;
+				goto out_free_nic_io;
+			}
+
+			for (i = 0; i < nic_io->max_vfs; i++) {
+				err = hinic_init_vf_infos(nic_io, i);
+				if (err)
+					goto err_init_vf_infos;
+			}
+
+			err = hinic_register_pf_mbox_cb(hwdev, HINIC_MOD_L2NIC,
+							nic_pf_mbox_handler);
+			if (err)
+				goto err_register_pf_mbox_cb;
+		}
+	}
+
+	return 0;
+
+err_register_pf_mbox_cb:
+err_init_vf_infos:
+	kfree(nic_io->vf_infos);
+out_free_nic_io:
+	return err;
+}
+
+void hinic_vf_func_free(struct hinic_hwdev *hwdev)
+{
+	struct hinic_register_vf unregister = {0};
+	u16 out_size = sizeof(unregister);
+	int err;
+
+	if (HINIC_IS_VF(hwdev->hwif)) {
+		err = hinic_mbox_to_pf(hwdev, HINIC_MOD_L2NIC,
+				       HINIC_PORT_CMD_VF_UNREGISTER,
+				       &unregister, sizeof(unregister),
+				       &unregister, &out_size, 0);
+		if (err || !out_size || unregister.status)
+			dev_err(&hwdev->hwif->pdev->dev, "Failed to unregister VF, err: %d, status: 0x%x, out_size: 0x%x\n",
+				err, unregister.status, out_size);
+	} else {
+		if (hwdev->func_to_io.vf_infos) {
+			hinic_unregister_pf_mbox_cb(hwdev, HINIC_MOD_L2NIC);
+			kfree(hwdev->func_to_io.vf_infos);
+		}
+	}
+}
+
+int hinic_init_vf_hw(struct hinic_hwdev *hwdev, u16 start_vf_id, u16 end_vf_id)
+{
+	u16 i, func_idx;
+	int err;
+
+	/* vf use 256K as default wq page size, and can't change it */
+	for (i = start_vf_id; i <= end_vf_id; i++) {
+		func_idx = hinic_glb_pf_vf_offset(hwdev->hwif) + i;
+		err = hinic_set_wq_page_size(hwdev, func_idx,
+					     HINIC_DEFAULT_WQ_PAGE_SIZE);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+int hinic_pci_sriov_disable(struct pci_dev *pdev)
+{
+	struct hinic_sriov_info *sriov_info;
+	u16 tmp_vfs;
+
+	sriov_info = hinic_get_sriov_info_by_pcidev(pdev);
+	/* if SR-IOV is already disabled then nothing will be done */
+	if (!sriov_info->sriov_enabled)
+		return 0;
+
+	set_bit(HINIC_SRIOV_DISABLE, &sriov_info->state);
+
+	/* If our VFs are assigned we cannot shut down SR-IOV
+	 * without causing issues, so just leave the hardware
+	 * available but disabled
+	 */
+	if (pci_vfs_assigned(sriov_info->pdev)) {
+		clear_bit(HINIC_SRIOV_DISABLE, &sriov_info->state);
+		dev_warn(&pdev->dev, "Unloading driver while VFs are assigned - VFs will not be deallocated\n");
+		return -EPERM;
+	}
+	sriov_info->sriov_enabled = false;
+
+	/* disable iov and allow time for transactions to clear */
+	pci_disable_sriov(sriov_info->pdev);
+
+	tmp_vfs = (u16)sriov_info->num_vfs;
+	sriov_info->num_vfs = 0;
+	hinic_deinit_vf_hw(sriov_info, OS_VF_ID_TO_HW(0),
+			   OS_VF_ID_TO_HW(tmp_vfs - 1));
+
+	clear_bit(HINIC_SRIOV_DISABLE, &sriov_info->state);
+
+	return 0;
+}
+
+int hinic_pci_sriov_enable(struct pci_dev *pdev, int num_vfs)
+{
+	struct hinic_sriov_info *sriov_info;
+	int err;
+
+	sriov_info = hinic_get_sriov_info_by_pcidev(pdev);
+
+	if (test_and_set_bit(HINIC_SRIOV_ENABLE, &sriov_info->state)) {
+		dev_err(&pdev->dev,
+			"SR-IOV enable in process, please wait, num_vfs %d\n",
+			num_vfs);
+		return -EPERM;
+	}
+
+	err = hinic_init_vf_hw(sriov_info->hwdev, OS_VF_ID_TO_HW(0),
+			       OS_VF_ID_TO_HW((u16)num_vfs - 1));
+	if (err) {
+		dev_err(&sriov_info->pdev->dev,
+			"Failed to init vf in hardware before enable sriov, error %d\n",
+			err);
+		clear_bit(HINIC_SRIOV_ENABLE, &sriov_info->state);
+		return err;
+	}
+
+	err = pci_enable_sriov(sriov_info->pdev, num_vfs);
+	if (err) {
+		dev_err(&pdev->dev,
+			"Failed to enable SR-IOV, error %d\n", err);
+		clear_bit(HINIC_SRIOV_ENABLE, &sriov_info->state);
+		return err;
+	}
+
+	sriov_info->sriov_enabled = true;
+	sriov_info->num_vfs = num_vfs;
+	clear_bit(HINIC_SRIOV_ENABLE, &sriov_info->state);
+
+	return num_vfs;
+}
+
+int hinic_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
+{
+	struct hinic_sriov_info *sriov_info;
+
+	sriov_info = hinic_get_sriov_info_by_pcidev(dev);
+
+	if (test_bit(HINIC_FUNC_REMOVE, &sriov_info->state))
+		return -EBUSY;
+
+	if (!num_vfs)
+		return hinic_pci_sriov_disable(dev);
+	else
+		return hinic_pci_sriov_enable(dev, num_vfs);
+}
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.h b/drivers/net/ethernet/huawei/hinic/hinic_sriov.h
new file mode 100644
index 000000000000..64affc7474b5
--- /dev/null
+++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Huawei HiNIC PCI Express Linux driver
+ * Copyright(c) 2017 Huawei Technologies Co., Ltd
+ */
+
+#ifndef HINIC_SRIOV_H
+#define HINIC_SRIOV_H
+
+#include "hinic_hw_dev.h"
+
+#define OS_VF_ID_TO_HW(os_vf_id) ((os_vf_id) + 1)
+#define HW_VF_ID_TO_OS(hw_vf_id) ((hw_vf_id) - 1)
+
+enum hinic_sriov_state {
+	HINIC_SRIOV_DISABLE,
+	HINIC_SRIOV_ENABLE,
+	HINIC_FUNC_REMOVE,
+};
+
+enum {
+	HINIC_IFLA_VF_LINK_STATE_AUTO,	/* link state of the uplink */
+	HINIC_IFLA_VF_LINK_STATE_ENABLE,	/* link always up */
+	HINIC_IFLA_VF_LINK_STATE_DISABLE,	/* link always down */
+};
+
+struct hinic_sriov_info {
+	struct pci_dev *pdev;
+	struct hinic_hwdev *hwdev;
+	bool sriov_enabled;
+	unsigned int num_vfs;
+	unsigned long state;
+};
+
+struct vf_data_storage {
+	u8 vf_mac_addr[ETH_ALEN];
+	bool registered;
+	bool pf_set_mac;
+	u16 pf_vlan;
+	u8 pf_qos;
+	u32 max_rate;
+	u32 min_rate;
+
+	bool link_forced;
+	bool link_up;		/* only valid if VF link is forced */
+	bool spoofchk;
+	bool trust;
+};
+
+struct hinic_register_vf {
+	u8	status;
+	u8	version;
+	u8	rsvd0[6];
+};
+
+struct hinic_port_mac_update {
+	u8	status;
+	u8	version;
+	u8	rsvd0[6];
+
+	u16	func_id;
+	u16	vlan_id;
+	u16	rsvd1;
+	u8	old_mac[ETH_ALEN];
+	u16	rsvd2;
+	u8	new_mac[ETH_ALEN];
+};
+
+struct hinic_vf_vlan_config {
+	u8 status;
+	u8 version;
+	u8 rsvd0[6];
+
+	u16 func_id;
+	u16 vlan_id;
+	u8  qos;
+	u8  rsvd1[7];
+};
+
+int hinic_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
+
+int hinic_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos,
+			  __be16 vlan_proto);
+
+int hinic_ndo_get_vf_config(struct net_device *netdev,
+			    int vf, struct ifla_vf_info *ivi);
+
+int hinic_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting);
+
+void hinic_notify_all_vfs_link_changed(struct hinic_hwdev *hwdev,
+				       u8 link_status);
+
+int hinic_pci_sriov_disable(struct pci_dev *dev);
+
+int hinic_pci_sriov_enable(struct pci_dev *dev, int num_vfs);
+
+int hinic_vf_func_init(struct hinic_hwdev *hwdev);
+
+void hinic_vf_func_free(struct hinic_hwdev *hwdev);
+
+int hinic_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
+
+#endif
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_tx.c b/drivers/net/ethernet/huawei/hinic/hinic_tx.c
index 365016450bdb..4c66a0bc1b28 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_tx.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_tx.c
@@ -673,9 +673,11 @@ static int free_tx_poll(struct napi_struct *napi, int budget)
 
 	if (pkts < budget) {
 		napi_complete(napi);
-		hinic_hwdev_set_msix_state(nic_dev->hwdev,
-					   sq->msix_entry,
-					   HINIC_MSIX_ENABLE);
+		if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+			hinic_hwdev_set_msix_state(nic_dev->hwdev,
+						   sq->msix_entry,
+						   HINIC_MSIX_ENABLE);
+
 		return pkts;
 	}
 
@@ -701,10 +703,11 @@ static irqreturn_t tx_irq(int irq, void *data)
 
 	nic_dev = netdev_priv(txq->netdev);
 
-	/* Disable the interrupt until napi will be completed */
-	hinic_hwdev_set_msix_state(nic_dev->hwdev,
-				   txq->sq->msix_entry,
-				   HINIC_MSIX_DISABLE);
+	if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+		/* Disable the interrupt until napi will be completed */
+		hinic_hwdev_set_msix_state(nic_dev->hwdev,
+					   txq->sq->msix_entry,
+					   HINIC_MSIX_DISABLE);
 
 	hinic_hwdev_msix_cnt_set(nic_dev->hwdev, txq->sq->msix_entry);
 
diff --git a/drivers/net/ethernet/i825xx/sun3_82586.h b/drivers/net/ethernet/i825xx/sun3_82586.h
index 79aef681ac85..97fa61a64c12 100644
--- a/drivers/net/ethernet/i825xx/sun3_82586.h
+++ b/drivers/net/ethernet/i825xx/sun3_82586.h
@@ -246,11 +246,11 @@ struct configure_cmd_struct
  */
 struct mcsetup_cmd_struct
 {
-  unsigned short cmd_status;
-  unsigned short cmd_cmd;
-  unsigned short cmd_link;
-  unsigned short mc_cnt;		/* number of bytes in the MC-List */
-  unsigned char  mc_list[0][6];  	/* pointer to 6 bytes entries */
+	unsigned short cmd_status;
+	unsigned short cmd_cmd;
+	unsigned short cmd_link;
+	unsigned short mc_cnt;		/* number of bytes in the MC-List */
+	unsigned char  mc_list[][6];	/* pointer to 6 bytes entries */
 };
 
 /*
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 0d51cbc88028..05bc6e216bca 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -3136,8 +3136,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (skb->data_len && hdr_len == len) {
 			switch (hw->mac_type) {
+			case e1000_82544: {
 				unsigned int pull_size;
-			case e1000_82544:
+
 				/* Make sure we have room to chop off 4 bytes,
 				 * and that the end alignment will work out to
 				 * this hardware's requirements
@@ -3158,6 +3159,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				}
 				len = skb_headlen(skb);
 				break;
+			}
 			default:
 				/* do nothing */
 				break;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 177c6da80c57..53e53164188f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6404,6 +6404,31 @@ static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
 	mac_data |= BIT(3);
 	ew32(CTRL_EXT, mac_data);
 
+	/* Disable disconnected cable conditioning for Power Gating */
+	mac_data = er32(DPGFR);
+	mac_data |= BIT(2);
+	ew32(DPGFR, mac_data);
+
+	/* Don't wake from dynamic Power Gating with clock request */
+	mac_data = er32(FEXTNVM12);
+	mac_data |= BIT(12);
+	ew32(FEXTNVM12, mac_data);
+
+	/* Ungate PGCB clock */
+	mac_data = er32(FEXTNVM9);
+	mac_data |= BIT(28);
+	ew32(FEXTNVM9, mac_data);
+
+	/* Enable K1 off to enable mPHY Power Gating */
+	mac_data = er32(FEXTNVM6);
+	mac_data |= BIT(31);
+	ew32(FEXTNVM12, mac_data);
+
+	/* Enable mPHY power gating for any link and speed */
+	mac_data = er32(FEXTNVM8);
+	mac_data |= BIT(9);
+	ew32(FEXTNVM8, mac_data);
+
 	/* Enable the Dynamic Clock Gating in the DMA and MAC */
 	mac_data = er32(CTRL_EXT);
 	mac_data |= E1000_CTRL_EXT_DMA_DYN_CLK_EN;
@@ -6433,6 +6458,35 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
 	mac_data |= BIT(0);
 	ew32(FEXTNVM7, mac_data);
 
+	/* Disable mPHY power gating for any link and speed */
+	mac_data = er32(FEXTNVM8);
+	mac_data &= ~BIT(9);
+	ew32(FEXTNVM8, mac_data);
+
+	/* Disable K1 off */
+	mac_data = er32(FEXTNVM6);
+	mac_data &= ~BIT(31);
+	ew32(FEXTNVM12, mac_data);
+
+	/* Disable Ungate PGCB clock */
+	mac_data = er32(FEXTNVM9);
+	mac_data &= ~BIT(28);
+	ew32(FEXTNVM9, mac_data);
+
+	/* Cancel not waking from dynamic
+	 * Power Gating with clock request
+	 */
+	mac_data = er32(FEXTNVM12);
+	mac_data &= ~BIT(12);
+	ew32(FEXTNVM12, mac_data);
+
+	/* Cancel disable disconnected cable conditioning
+	 * for Power Gating
+	 */
+	mac_data = er32(DPGFR);
+	mac_data &= ~BIT(2);
+	ew32(DPGFR, mac_data);
+
 	/* Disable Dynamic Power Gating */
 	mac_data = er32(CTRL_EXT);
 	mac_data &= 0xFFFFFFF7;
@@ -7549,7 +7603,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	e1000_print_device_info(adapter);
 
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	if (pci_dev_run_wake(pdev) && hw->mac.type < e1000_pch_cnp)
 		pm_runtime_put_noidle(&pdev->dev);
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
index df59fd1d660c..8165ba2619a4 100644
--- a/drivers/net/ethernet/intel/e1000e/regs.h
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -21,9 +21,12 @@
 #define E1000_FEXTNVM5	0x00014	/* Future Extended NVM 5 - RW */
 #define E1000_FEXTNVM6	0x00010	/* Future Extended NVM 6 - RW */
 #define E1000_FEXTNVM7	0x000E4	/* Future Extended NVM 7 - RW */
+#define E1000_FEXTNVM8	0x5BB0	/* Future Extended NVM 8 - RW */
 #define E1000_FEXTNVM9	0x5BB4	/* Future Extended NVM 9 - RW */
 #define E1000_FEXTNVM11	0x5BBC	/* Future Extended NVM 11 - RW */
+#define E1000_FEXTNVM12	0x5BC0	/* Future Extended NVM 12 - RW */
 #define E1000_PCIEANACFG	0x00F18	/* PCIE Analog Config */
+#define E1000_DPGFR	0x00FAC	/* Dynamic Power Gate Force Control Register */
 #define E1000_FCT	0x00030	/* Flow Control Type - RW */
 #define E1000_VET	0x00038	/* VLAN Ether Type - RW */
 #define E1000_ICR	0x000C0	/* Interrupt Cause Read - R/clr */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b46bff8fe056..8bb3db2cbd41 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3445,7 +3445,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	pm_runtime_put_noidle(&pdev->dev);
 	return 0;
diff --git a/drivers/net/ethernet/intel/igc/Makefile b/drivers/net/ethernet/intel/igc/Makefile
index e3c164c12e10..3652f211f351 100644
--- a/drivers/net/ethernet/intel/igc/Makefile
+++ b/drivers/net/ethernet/intel/igc/Makefile
@@ -8,4 +8,4 @@
 obj-$(CONFIG_IGC) += igc.o
 
 igc-objs := igc_main.o igc_mac.o igc_i225.o igc_base.o igc_nvm.o igc_phy.o \
-igc_ethtool.o igc_ptp.o igc_dump.o
+igc_ethtool.o igc_ptp.o igc_dump.o igc_tsn.o
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index a1f845a2aa80..8ddc39482a8e 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -19,8 +19,199 @@
 /* forward declaration */
 void igc_set_ethtool_ops(struct net_device *);
 
-struct igc_adapter;
-struct igc_ring;
+/* Transmit and receive queues */
+#define IGC_MAX_RX_QUEUES		4
+#define IGC_MAX_TX_QUEUES		4
+
+#define MAX_Q_VECTORS			8
+#define MAX_STD_JUMBO_FRAME_SIZE	9216
+
+#define MAX_ETYPE_FILTER		(4 - 1)
+#define IGC_RETA_SIZE			128
+
+struct igc_tx_queue_stats {
+	u64 packets;
+	u64 bytes;
+	u64 restart_queue;
+	u64 restart_queue2;
+};
+
+struct igc_rx_queue_stats {
+	u64 packets;
+	u64 bytes;
+	u64 drops;
+	u64 csum_err;
+	u64 alloc_failed;
+};
+
+struct igc_rx_packet_stats {
+	u64 ipv4_packets;      /* IPv4 headers processed */
+	u64 ipv4e_packets;     /* IPv4E headers with extensions processed */
+	u64 ipv6_packets;      /* IPv6 headers processed */
+	u64 ipv6e_packets;     /* IPv6E headers with extensions processed */
+	u64 tcp_packets;       /* TCP headers processed */
+	u64 udp_packets;       /* UDP headers processed */
+	u64 sctp_packets;      /* SCTP headers processed */
+	u64 nfs_packets;       /* NFS headers processe */
+	u64 other_packets;
+};
+
+struct igc_ring_container {
+	struct igc_ring *ring;          /* pointer to linked list of rings */
+	unsigned int total_bytes;       /* total bytes processed this int */
+	unsigned int total_packets;     /* total packets processed this int */
+	u16 work_limit;                 /* total work allowed per interrupt */
+	u8 count;                       /* total number of rings in vector */
+	u8 itr;                         /* current ITR setting for ring */
+};
+
+struct igc_ring {
+	struct igc_q_vector *q_vector;  /* backlink to q_vector */
+	struct net_device *netdev;      /* back pointer to net_device */
+	struct device *dev;             /* device for dma mapping */
+	union {                         /* array of buffer info structs */
+		struct igc_tx_buffer *tx_buffer_info;
+		struct igc_rx_buffer *rx_buffer_info;
+	};
+	void *desc;                     /* descriptor ring memory */
+	unsigned long flags;            /* ring specific flags */
+	void __iomem *tail;             /* pointer to ring tail register */
+	dma_addr_t dma;                 /* phys address of the ring */
+	unsigned int size;              /* length of desc. ring in bytes */
+
+	u16 count;                      /* number of desc. in the ring */
+	u8 queue_index;                 /* logical index of the ring*/
+	u8 reg_idx;                     /* physical index of the ring */
+	bool launchtime_enable;         /* true if LaunchTime is enabled */
+
+	u32 start_time;
+	u32 end_time;
+
+	/* everything past this point are written often */
+	u16 next_to_clean;
+	u16 next_to_use;
+	u16 next_to_alloc;
+
+	union {
+		/* TX */
+		struct {
+			struct igc_tx_queue_stats tx_stats;
+			struct u64_stats_sync tx_syncp;
+			struct u64_stats_sync tx_syncp2;
+		};
+		/* RX */
+		struct {
+			struct igc_rx_queue_stats rx_stats;
+			struct igc_rx_packet_stats pkt_stats;
+			struct u64_stats_sync rx_syncp;
+			struct sk_buff *skb;
+		};
+	};
+} ____cacheline_internodealigned_in_smp;
+
+/* Board specific private data structure */
+struct igc_adapter {
+	struct net_device *netdev;
+
+	unsigned long state;
+	unsigned int flags;
+	unsigned int num_q_vectors;
+
+	struct msix_entry *msix_entries;
+
+	/* TX */
+	u16 tx_work_limit;
+	u32 tx_timeout_count;
+	int num_tx_queues;
+	struct igc_ring *tx_ring[IGC_MAX_TX_QUEUES];
+
+	/* RX */
+	int num_rx_queues;
+	struct igc_ring *rx_ring[IGC_MAX_RX_QUEUES];
+
+	struct timer_list watchdog_timer;
+	struct timer_list dma_err_timer;
+	struct timer_list phy_info_timer;
+
+	u32 wol;
+	u32 en_mng_pt;
+	u16 link_speed;
+	u16 link_duplex;
+
+	u8 port_num;
+
+	u8 __iomem *io_addr;
+	/* Interrupt Throttle Rate */
+	u32 rx_itr_setting;
+	u32 tx_itr_setting;
+
+	struct work_struct reset_task;
+	struct work_struct watchdog_task;
+	struct work_struct dma_err_task;
+	bool fc_autoneg;
+
+	u8 tx_timeout_factor;
+
+	int msg_enable;
+	u32 max_frame_size;
+	u32 min_frame_size;
+
+	ktime_t base_time;
+	ktime_t cycle_time;
+
+	/* OS defined structs */
+	struct pci_dev *pdev;
+	/* lock for statistics */
+	spinlock_t stats64_lock;
+	struct rtnl_link_stats64 stats64;
+
+	/* structs defined in igc_hw.h */
+	struct igc_hw hw;
+	struct igc_hw_stats stats;
+
+	struct igc_q_vector *q_vector[MAX_Q_VECTORS];
+	u32 eims_enable_mask;
+	u32 eims_other;
+
+	u16 tx_ring_count;
+	u16 rx_ring_count;
+
+	u32 tx_hwtstamp_timeouts;
+	u32 tx_hwtstamp_skipped;
+	u32 rx_hwtstamp_cleared;
+
+	u32 rss_queues;
+	u32 rss_indir_tbl_init;
+
+	/* RX network flow classification support */
+	struct hlist_head nfc_filter_list;
+	unsigned int nfc_filter_count;
+
+	/* lock for RX network flow classification filter */
+	spinlock_t nfc_lock;
+	bool etype_bitmap[MAX_ETYPE_FILTER];
+
+	struct igc_mac_addr *mac_table;
+
+	u8 rss_indir_tbl[IGC_RETA_SIZE];
+
+	unsigned long link_check_timeout;
+	struct igc_info ei;
+
+	struct ptp_clock *ptp_clock;
+	struct ptp_clock_info ptp_caps;
+	struct work_struct ptp_tx_work;
+	struct sk_buff *ptp_tx_skb;
+	struct hwtstamp_config tstamp_config;
+	unsigned long ptp_tx_start;
+	unsigned long last_rx_ptp_check;
+	unsigned long last_rx_timestamp;
+	unsigned int ptp_flags;
+	/* System time value lock */
+	spinlock_t tmreg_lock;
+	struct cyclecounter cc;
+	struct timecounter tc;
+};
 
 void igc_up(struct igc_adapter *adapter);
 void igc_down(struct igc_adapter *adapter);
@@ -36,10 +227,10 @@ void igc_write_rss_indir_tbl(struct igc_adapter *adapter);
 bool igc_has_link(struct igc_adapter *adapter);
 void igc_reset(struct igc_adapter *adapter);
 int igc_set_spd_dplx(struct igc_adapter *adapter, u32 spd, u8 dplx);
-int igc_add_mac_steering_filter(struct igc_adapter *adapter,
-				const u8 *addr, u8 queue, u8 flags);
-int igc_del_mac_steering_filter(struct igc_adapter *adapter,
-				const u8 *addr, u8 queue, u8 flags);
+int igc_add_mac_filter(struct igc_adapter *adapter, const u8 *addr,
+		       const s8 queue, const u8 flags);
+int igc_del_mac_filter(struct igc_adapter *adapter, const u8 *addr,
+		       const u8 flags);
 void igc_update_stats(struct igc_adapter *adapter);
 
 /* igc_dump declarations */
@@ -50,14 +241,10 @@ extern char igc_driver_name[];
 extern char igc_driver_version[];
 
 #define IGC_REGS_LEN			740
-#define IGC_RETA_SIZE			128
 
 /* flags controlling PTP/1588 function */
 #define IGC_PTP_ENABLED		BIT(0)
 
-/* Interrupt defines */
-#define IGC_START_ITR			648 /* ~6000 ints/sec */
-
 /* Flags definitions */
 #define IGC_FLAG_HAS_MSI		BIT(0)
 #define IGC_FLAG_QUEUE_PAIRS		BIT(3)
@@ -70,6 +257,7 @@ extern char igc_driver_version[];
 #define IGC_FLAG_HAS_MSIX		BIT(13)
 #define IGC_FLAG_VLAN_PROMISC		BIT(15)
 #define IGC_FLAG_RX_LEGACY		BIT(16)
+#define IGC_FLAG_TSN_QBV_ENABLED	BIT(17)
 
 #define IGC_FLAG_RSS_FIELD_IPV4_UDP	BIT(6)
 #define IGC_FLAG_RSS_FIELD_IPV6_UDP	BIT(7)
@@ -78,6 +266,7 @@ extern char igc_driver_version[];
 #define IGC_MRQC_RSS_FIELD_IPV4_UDP	0x00400000
 #define IGC_MRQC_RSS_FIELD_IPV6_UDP	0x00800000
 
+/* Interrupt defines */
 #define IGC_START_ITR			648 /* ~6000 ints/sec */
 #define IGC_4K_ITR			980
 #define IGC_20K_ITR			196
@@ -99,13 +288,6 @@ extern char igc_driver_version[];
 #define IGC_MIN_RXD		80
 #define IGC_MAX_RXD		4096
 
-/* Transmit and receive queues */
-#define IGC_MAX_RX_QUEUES		4
-#define IGC_MAX_TX_QUEUES		4
-
-#define MAX_Q_VECTORS			8
-#define MAX_STD_JUMBO_FRAME_SIZE	9216
-
 /* Supported Rx Buffer Sizes */
 #define IGC_RXBUFFER_256		256
 #define IGC_RXBUFFER_2048		2048
@@ -232,83 +414,6 @@ struct igc_rx_buffer {
 	__u16 pagecnt_bias;
 };
 
-struct igc_tx_queue_stats {
-	u64 packets;
-	u64 bytes;
-	u64 restart_queue;
-	u64 restart_queue2;
-};
-
-struct igc_rx_queue_stats {
-	u64 packets;
-	u64 bytes;
-	u64 drops;
-	u64 csum_err;
-	u64 alloc_failed;
-};
-
-struct igc_rx_packet_stats {
-	u64 ipv4_packets;      /* IPv4 headers processed */
-	u64 ipv4e_packets;     /* IPv4E headers with extensions processed */
-	u64 ipv6_packets;      /* IPv6 headers processed */
-	u64 ipv6e_packets;     /* IPv6E headers with extensions processed */
-	u64 tcp_packets;       /* TCP headers processed */
-	u64 udp_packets;       /* UDP headers processed */
-	u64 sctp_packets;      /* SCTP headers processed */
-	u64 nfs_packets;       /* NFS headers processe */
-	u64 other_packets;
-};
-
-struct igc_ring_container {
-	struct igc_ring *ring;          /* pointer to linked list of rings */
-	unsigned int total_bytes;       /* total bytes processed this int */
-	unsigned int total_packets;     /* total packets processed this int */
-	u16 work_limit;                 /* total work allowed per interrupt */
-	u8 count;                       /* total number of rings in vector */
-	u8 itr;                         /* current ITR setting for ring */
-};
-
-struct igc_ring {
-	struct igc_q_vector *q_vector;  /* backlink to q_vector */
-	struct net_device *netdev;      /* back pointer to net_device */
-	struct device *dev;             /* device for dma mapping */
-	union {                         /* array of buffer info structs */
-		struct igc_tx_buffer *tx_buffer_info;
-		struct igc_rx_buffer *rx_buffer_info;
-	};
-	void *desc;                     /* descriptor ring memory */
-	unsigned long flags;            /* ring specific flags */
-	void __iomem *tail;             /* pointer to ring tail register */
-	dma_addr_t dma;                 /* phys address of the ring */
-	unsigned int size;              /* length of desc. ring in bytes */
-
-	u16 count;                      /* number of desc. in the ring */
-	u8 queue_index;                 /* logical index of the ring*/
-	u8 reg_idx;                     /* physical index of the ring */
-	bool launchtime_enable;		/* true if LaunchTime is enabled */
-
-	/* everything past this point are written often */
-	u16 next_to_clean;
-	u16 next_to_use;
-	u16 next_to_alloc;
-
-	union {
-		/* TX */
-		struct {
-			struct igc_tx_queue_stats tx_stats;
-			struct u64_stats_sync tx_syncp;
-			struct u64_stats_sync tx_syncp2;
-		};
-		/* RX */
-		struct {
-			struct igc_rx_queue_stats rx_stats;
-			struct igc_rx_packet_stats pkt_stats;
-			struct u64_stats_sync rx_syncp;
-			struct sk_buff *skb;
-		};
-	};
-} ____cacheline_internodealigned_in_smp;
-
 struct igc_q_vector {
 	struct igc_adapter *adapter;    /* backlink */
 	void __iomem *itr_register;
@@ -329,8 +434,6 @@ struct igc_q_vector {
 	struct igc_ring ring[] ____cacheline_internodealigned_in_smp;
 };
 
-#define MAX_ETYPE_FILTER		(4 - 1)
-
 enum igc_filter_match_flags {
 	IGC_FILTER_FLAG_ETHER_TYPE =	0x1,
 	IGC_FILTER_FLAG_VLAN_TCI   =	0x2,
@@ -363,119 +466,16 @@ struct igc_nfc_filter {
 
 struct igc_mac_addr {
 	u8 addr[ETH_ALEN];
-	u8 queue;
+	s8 queue;
 	u8 state; /* bitmask */
 };
 
 #define IGC_MAC_STATE_DEFAULT		0x1
 #define IGC_MAC_STATE_IN_USE		0x2
 #define IGC_MAC_STATE_SRC_ADDR		0x4
-#define IGC_MAC_STATE_QUEUE_STEERING	0x8
 
 #define IGC_MAX_RXNFC_FILTERS		16
 
-/* Board specific private data structure */
-struct igc_adapter {
-	struct net_device *netdev;
-
-	unsigned long state;
-	unsigned int flags;
-	unsigned int num_q_vectors;
-
-	struct msix_entry *msix_entries;
-
-	/* TX */
-	u16 tx_work_limit;
-	u32 tx_timeout_count;
-	int num_tx_queues;
-	struct igc_ring *tx_ring[IGC_MAX_TX_QUEUES];
-
-	/* RX */
-	int num_rx_queues;
-	struct igc_ring *rx_ring[IGC_MAX_RX_QUEUES];
-
-	struct timer_list watchdog_timer;
-	struct timer_list dma_err_timer;
-	struct timer_list phy_info_timer;
-
-	u32 wol;
-	u32 en_mng_pt;
-	u16 link_speed;
-	u16 link_duplex;
-
-	u8 port_num;
-
-	u8 __iomem *io_addr;
-	/* Interrupt Throttle Rate */
-	u32 rx_itr_setting;
-	u32 tx_itr_setting;
-
-	struct work_struct reset_task;
-	struct work_struct watchdog_task;
-	struct work_struct dma_err_task;
-	bool fc_autoneg;
-
-	u8 tx_timeout_factor;
-
-	int msg_enable;
-	u32 max_frame_size;
-	u32 min_frame_size;
-
-	/* OS defined structs */
-	struct pci_dev *pdev;
-	/* lock for statistics */
-	spinlock_t stats64_lock;
-	struct rtnl_link_stats64 stats64;
-
-	/* structs defined in igc_hw.h */
-	struct igc_hw hw;
-	struct igc_hw_stats stats;
-
-	struct igc_q_vector *q_vector[MAX_Q_VECTORS];
-	u32 eims_enable_mask;
-	u32 eims_other;
-
-	u16 tx_ring_count;
-	u16 rx_ring_count;
-
-	u32 tx_hwtstamp_timeouts;
-	u32 tx_hwtstamp_skipped;
-	u32 rx_hwtstamp_cleared;
-
-	u32 rss_queues;
-	u32 rss_indir_tbl_init;
-
-	/* RX network flow classification support */
-	struct hlist_head nfc_filter_list;
-	struct hlist_head cls_flower_list;
-	unsigned int nfc_filter_count;
-
-	/* lock for RX network flow classification filter */
-	spinlock_t nfc_lock;
-	bool etype_bitmap[MAX_ETYPE_FILTER];
-
-	struct igc_mac_addr *mac_table;
-
-	u8 rss_indir_tbl[IGC_RETA_SIZE];
-
-	unsigned long link_check_timeout;
-	struct igc_info ei;
-
-	struct ptp_clock *ptp_clock;
-	struct ptp_clock_info ptp_caps;
-	struct work_struct ptp_tx_work;
-	struct sk_buff *ptp_tx_skb;
-	struct hwtstamp_config tstamp_config;
-	unsigned long ptp_tx_start;
-	unsigned long last_rx_ptp_check;
-	unsigned long last_rx_timestamp;
-	unsigned int ptp_flags;
-	/* System time value lock */
-	spinlock_t tmreg_lock;
-	struct cyclecounter cc;
-	struct timecounter tc;
-};
-
 /* igc_desc_unused - calculate if we have unused descriptors */
 static inline u16 igc_desc_unused(const struct igc_ring *ring)
 {
diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c
index 5a506440560a..f7fb18d8d8f5 100644
--- a/drivers/net/ethernet/intel/igc/igc_base.c
+++ b/drivers/net/ethernet/intel/igc/igc_base.c
@@ -212,6 +212,9 @@ static s32 igc_get_invariants_base(struct igc_hw *hw)
 	case IGC_DEV_ID_I225_I:
 	case IGC_DEV_ID_I220_V:
 	case IGC_DEV_ID_I225_K:
+	case IGC_DEV_ID_I225_K2:
+	case IGC_DEV_ID_I225_LMVP:
+	case IGC_DEV_ID_I225_IT:
 	case IGC_DEV_ID_I225_BLANK_NVM:
 		mac->type = igc_i225;
 		break;
diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
index 4ddccccf42cc..af0c03d77a39 100644
--- a/drivers/net/ethernet/intel/igc/igc_defines.h
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -44,9 +44,6 @@
 /* Wake Up Packet Memory stores the first 128 bytes of the wake up packet */
 #define IGC_WUPM_BYTES	128
 
-/* Physical Func Reset Done Indication */
-#define IGC_CTRL_EXT_LINK_MODE_MASK	0x00C00000
-
 /* Loop limit on how long we wait for auto-negotiation to complete */
 #define COPPER_LINK_UP_LIMIT		10
 #define PHY_AUTO_NEG_LIMIT		45
@@ -66,8 +63,11 @@
  * (RAR[15]) for our directed address used by controllers with
  * manageability enabled, allowing us room for 15 multicast addresses.
  */
+#define IGC_RAH_QSEL_MASK	0x000C0000
+#define IGC_RAH_QSEL_SHIFT	18
+#define IGC_RAH_QSEL_ENABLE	BIT(28)
 #define IGC_RAH_AV		0x80000000 /* Receive descriptor valid */
-#define IGC_RAH_POOL_1		0x00040000
+
 #define IGC_RAL_MAC_ADDR_LEN	4
 #define IGC_RAH_MAC_ADDR_LEN	2
 
@@ -94,8 +94,6 @@
 #define IGC_CTRL_RFCE		0x08000000  /* Receive Flow Control enable */
 #define IGC_CTRL_TFCE		0x10000000  /* Transmit flow control enable */
 
-#define IGC_CONNSW_AUTOSENSE_EN	0x1
-
 /* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */
 #define MAX_JUMBO_FRAME_SIZE	0x2600
 
@@ -377,6 +375,11 @@
 #define I225_TXPBSIZE_DEFAULT	0x04000014 /* TXPBSIZE default */
 #define IGC_RXPBS_CFG_TS_EN	0x80000000 /* Timestamp in Rx buffer */
 
+#define IGC_TXPBSIZE_TSN	0x04145145 /* 5k bytes buffer for each queue */
+
+#define IGC_DTXMXPKTSZ_TSN	0x19 /* 1600 bytes of max TX DMA packet size */
+#define IGC_DTXMXPKTSZ_DEFAULT	0x98 /* 9728-byte Jumbo frames */
+
 /* Time Sync Interrupt Causes */
 #define IGC_TSICR_SYS_WRAP	BIT(0) /* SYSTIM Wrap around. */
 #define IGC_TSICR_TXTS		BIT(1) /* Transmit Timestamp. */
@@ -431,6 +434,14 @@
 #define IGC_TSYNCTXCTL_START_SYNC		0x80000000  /* initiate sync */
 #define IGC_TSYNCTXCTL_TXSYNSIG			0x00000020  /* Sample TX tstamp in PHY sop */
 
+/* Transmit Scheduling */
+#define IGC_TQAVCTRL_TRANSMIT_MODE_TSN	0x00000001
+#define IGC_TQAVCTRL_ENHANCED_QAV	0x00000008
+
+#define IGC_TXQCTL_QUEUE_MODE_LAUNCHT	0x00000001
+#define IGC_TXQCTL_STRICT_CYCLE		0x00000002
+#define IGC_TXQCTL_STRICT_END		0x00000004
+
 /* Receive Checksum Control */
 #define IGC_RXCSUM_CRCOFL	0x00000800   /* CRC32 offload enable */
 #define IGC_RXCSUM_PCSD		0x00002000   /* packet checksum disabled */
@@ -497,7 +508,6 @@
 #define IGC_MDIC_READY		0x10000000
 #define IGC_MDIC_INT_EN		0x20000000
 #define IGC_MDIC_ERROR		0x40000000
-#define IGC_MDIC_DEST		0x80000000
 
 #define IGC_N0_QUEUE		-1
 
diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index f530fc29b074..0a8c4a7412a4 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -153,7 +153,7 @@ static void igc_get_regs(struct net_device *netdev,
 
 	memset(p, 0, IGC_REGS_LEN * sizeof(u32));
 
-	regs->version = (1u << 24) | (hw->revision_id << 16) | hw->device_id;
+	regs->version = (2u << 24) | (hw->revision_id << 16) | hw->device_id;
 
 	/* General Registers */
 	regs_buff[0] = rd32(IGC_CTRL);
@@ -306,6 +306,15 @@ static void igc_get_regs(struct net_device *netdev,
 		regs_buff[164 + i] = rd32(IGC_TDT(i));
 	for (i = 0; i < 4; i++)
 		regs_buff[168 + i] = rd32(IGC_TXDCTL(i));
+
+	/* XXX: Due to a bug few lines above, RAL and RAH registers are
+	 * overwritten. To preserve the ABI, we write these registers again in
+	 * regs_buff.
+	 */
+	for (i = 0; i < 16; i++)
+		regs_buff[172 + i] = rd32(IGC_RAL(i));
+	for (i = 0; i < 16; i++)
+		regs_buff[188 + i] = rd32(IGC_RAH(i));
 }
 
 static void igc_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
@@ -1257,20 +1266,16 @@ int igc_add_filter(struct igc_adapter *adapter, struct igc_nfc_filter *input)
 	}
 
 	if (input->filter.match_flags & IGC_FILTER_FLAG_DST_MAC_ADDR) {
-		err = igc_add_mac_steering_filter(adapter,
-						  input->filter.dst_addr,
-						  input->action, 0);
-		err = min_t(int, err, 0);
+		err = igc_add_mac_filter(adapter, input->filter.dst_addr,
+					 input->action, 0);
 		if (err)
 			return err;
 	}
 
 	if (input->filter.match_flags & IGC_FILTER_FLAG_SRC_MAC_ADDR) {
-		err = igc_add_mac_steering_filter(adapter,
-						  input->filter.src_addr,
-						  input->action,
-						  IGC_MAC_STATE_SRC_ADDR);
-		err = min_t(int, err, 0);
+		err = igc_add_mac_filter(adapter, input->filter.src_addr,
+					 input->action,
+					 IGC_MAC_STATE_SRC_ADDR);
 		if (err)
 			return err;
 	}
@@ -1324,13 +1329,11 @@ int igc_erase_filter(struct igc_adapter *adapter, struct igc_nfc_filter *input)
 					   ntohs(input->filter.vlan_tci));
 
 	if (input->filter.match_flags & IGC_FILTER_FLAG_SRC_MAC_ADDR)
-		igc_del_mac_steering_filter(adapter, input->filter.src_addr,
-					    input->action,
-					    IGC_MAC_STATE_SRC_ADDR);
+		igc_del_mac_filter(adapter, input->filter.src_addr,
+				   IGC_MAC_STATE_SRC_ADDR);
 
 	if (input->filter.match_flags & IGC_FILTER_FLAG_DST_MAC_ADDR)
-		igc_del_mac_steering_filter(adapter, input->filter.dst_addr,
-					    input->action, 0);
+		igc_del_mac_filter(adapter, input->filter.dst_addr, 0);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/intel/igc/igc_hw.h b/drivers/net/ethernet/intel/igc/igc_hw.h
index 90ac0e0144d8..af34ae310327 100644
--- a/drivers/net/ethernet/intel/igc/igc_hw.h
+++ b/drivers/net/ethernet/intel/igc/igc_hw.h
@@ -21,6 +21,9 @@
 #define IGC_DEV_ID_I225_I			0x15F8
 #define IGC_DEV_ID_I220_V			0x15F7
 #define IGC_DEV_ID_I225_K			0x3100
+#define IGC_DEV_ID_I225_K2			0x3101
+#define IGC_DEV_ID_I225_LMVP			0x5502
+#define IGC_DEV_ID_I225_IT			0x0D9F
 #define IGC_DEV_ID_I225_BLANK_NVM		0x15FD
 
 /* Function pointers for the MAC. */
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 69fa1ce1f927..927fc95c5684 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -9,11 +9,13 @@
 #include <linux/udp.h>
 #include <linux/ip.h>
 #include <linux/pm_runtime.h>
+#include <net/pkt_sched.h>
 
 #include <net/ipv6.h>
 
 #include "igc.h"
 #include "igc_hw.h"
+#include "igc_tsn.h"
 
 #define DRV_VERSION	"0.0.1-k"
 #define DRV_SUMMARY	"Intel(R) 2.5G Ethernet Linux Driver"
@@ -45,6 +47,9 @@ static const struct pci_device_id igc_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_I), board_base },
 	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I220_V), board_base },
 	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_K), board_base },
+	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_K2), board_base },
+	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_LMVP), board_base },
+	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_IT), board_base },
 	{ PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_BLANK_NVM), board_base },
 	/* required last entry */
 	{0, }
@@ -106,6 +111,9 @@ void igc_reset(struct igc_adapter *adapter)
 	/* Re-enable PTP, where applicable. */
 	igc_ptp_reset(adapter);
 
+	/* Re-enable TSN offloading, where applicable. */
+	igc_tsn_offload_apply(adapter);
+
 	igc_get_phy_info(hw);
 }
 
@@ -757,48 +765,74 @@ static void igc_setup_tctl(struct igc_adapter *adapter)
 }
 
 /**
- * igc_rar_set_index - Sync RAL[index] and RAH[index] registers with MAC table
- * @adapter: address of board private structure
- * @index: Index of the RAR entry which need to be synced with MAC table
+ * igc_set_mac_filter_hw() - Set MAC address filter in hardware
+ * @adapter: Pointer to adapter where the filter should be set
+ * @index: Filter index
+ * @addr: Destination MAC address
+ * @queue: If non-negative, queue assignment feature is enabled and frames
+ *         matching the filter are enqueued onto 'queue'. Otherwise, queue
+ *         assignment is disabled.
  */
-static void igc_rar_set_index(struct igc_adapter *adapter, u32 index)
+static void igc_set_mac_filter_hw(struct igc_adapter *adapter, int index,
+				  const u8 *addr, int queue)
 {
-	u8 *addr = adapter->mac_table[index].addr;
+	struct net_device *dev = adapter->netdev;
 	struct igc_hw *hw = &adapter->hw;
-	u32 rar_low, rar_high;
+	u32 ral, rah;
 
-	/* HW expects these to be in network order when they are plugged
-	 * into the registers which are little endian.  In order to guarantee
-	 * that ordering we need to do an leXX_to_cpup here in order to be
-	 * ready for the byteswap that occurs with writel
-	 */
-	rar_low = le32_to_cpup((__le32 *)(addr));
-	rar_high = le16_to_cpup((__le16 *)(addr + 4));
+	if (WARN_ON(index >= hw->mac.rar_entry_count))
+		return;
 
-	/* Indicate to hardware the Address is Valid. */
-	if (adapter->mac_table[index].state & IGC_MAC_STATE_IN_USE) {
-		if (is_valid_ether_addr(addr))
-			rar_high |= IGC_RAH_AV;
+	ral = le32_to_cpup((__le32 *)(addr));
+	rah = le16_to_cpup((__le16 *)(addr + 4));
 
-		rar_high |= IGC_RAH_POOL_1 <<
-			adapter->mac_table[index].queue;
+	if (queue >= 0) {
+		rah &= ~IGC_RAH_QSEL_MASK;
+		rah |= (queue << IGC_RAH_QSEL_SHIFT);
+		rah |= IGC_RAH_QSEL_ENABLE;
 	}
 
-	wr32(IGC_RAL(index), rar_low);
-	wrfl();
-	wr32(IGC_RAH(index), rar_high);
-	wrfl();
+	rah |= IGC_RAH_AV;
+
+	wr32(IGC_RAL(index), ral);
+	wr32(IGC_RAH(index), rah);
+
+	netdev_dbg(dev, "MAC address filter set in HW: index %d", index);
+}
+
+/**
+ * igc_clear_mac_filter_hw() - Clear MAC address filter in hardware
+ * @adapter: Pointer to adapter where the filter should be cleared
+ * @index: Filter index
+ */
+static void igc_clear_mac_filter_hw(struct igc_adapter *adapter, int index)
+{
+	struct net_device *dev = adapter->netdev;
+	struct igc_hw *hw = &adapter->hw;
+
+	if (WARN_ON(index >= hw->mac.rar_entry_count))
+		return;
+
+	wr32(IGC_RAL(index), 0);
+	wr32(IGC_RAH(index), 0);
+
+	netdev_dbg(dev, "MAC address filter cleared in HW: index %d", index);
 }
 
 /* Set default MAC address for the PF in the first RAR entry */
 static void igc_set_default_mac_filter(struct igc_adapter *adapter)
 {
 	struct igc_mac_addr *mac_table = &adapter->mac_table[0];
+	struct net_device *dev = adapter->netdev;
+	u8 *addr = adapter->hw.mac.addr;
 
-	ether_addr_copy(mac_table->addr, adapter->hw.mac.addr);
+	netdev_dbg(dev, "Set default MAC address filter: address %pM", addr);
+
+	ether_addr_copy(mac_table->addr, addr);
 	mac_table->state = IGC_MAC_STATE_DEFAULT | IGC_MAC_STATE_IN_USE;
+	mac_table->queue = -1;
 
-	igc_rar_set_index(adapter, 0);
+	igc_set_mac_filter_hw(adapter, 0, addr, mac_table->queue);
 }
 
 /**
@@ -864,6 +898,23 @@ static int igc_write_mc_addr_list(struct net_device *netdev)
 	return netdev_mc_count(netdev);
 }
 
+static __le32 igc_tx_launchtime(struct igc_adapter *adapter, ktime_t txtime)
+{
+	ktime_t cycle_time = adapter->cycle_time;
+	ktime_t base_time = adapter->base_time;
+	u32 launchtime;
+
+	/* FIXME: when using ETF together with taprio, we may have a
+	 * case where 'delta' is larger than the cycle_time, this may
+	 * cause problems if we don't read the current value of
+	 * IGC_BASET, as the value writen into the launchtime
+	 * descriptor field may be misinterpreted.
+	 */
+	div_s64_rem(ktime_sub_ns(txtime, base_time), cycle_time, &launchtime);
+
+	return cpu_to_le32(launchtime);
+}
+
 static void igc_tx_ctxtdesc(struct igc_ring *tx_ring,
 			    struct igc_tx_buffer *first,
 			    u32 vlan_macip_lens, u32 type_tucmd,
@@ -871,7 +922,6 @@ static void igc_tx_ctxtdesc(struct igc_ring *tx_ring,
 {
 	struct igc_adv_tx_context_desc *context_desc;
 	u16 i = tx_ring->next_to_use;
-	struct timespec64 ts;
 
 	context_desc = IGC_TX_CTXTDESC(tx_ring, i);
 
@@ -893,9 +943,12 @@ static void igc_tx_ctxtdesc(struct igc_ring *tx_ring,
 	 * should have been handled by the upper layers.
 	 */
 	if (tx_ring->launchtime_enable) {
-		ts = ktime_to_timespec64(first->skb->tstamp);
+		struct igc_adapter *adapter = netdev_priv(tx_ring->netdev);
+		ktime_t txtime = first->skb->tstamp;
+
 		first->skb->tstamp = ktime_set(0, 0);
-		context_desc->launch_time = cpu_to_le32(ts.tv_nsec / 32);
+		context_desc->launch_time = igc_tx_launchtime(adapter,
+							      txtime);
 	} else {
 		context_desc->launch_time = 0;
 	}
@@ -2133,129 +2186,148 @@ static void igc_nfc_filter_restore(struct igc_adapter *adapter)
 	spin_unlock(&adapter->nfc_lock);
 }
 
-/* If the filter to be added and an already existing filter express
- * the same address and address type, it should be possible to only
- * override the other configurations, for example the queue to steer
- * traffic.
- */
-static bool igc_mac_entry_can_be_used(const struct igc_mac_addr *entry,
-				      const u8 *addr, const u8 flags)
+static int igc_find_mac_filter(struct igc_adapter *adapter, const u8 *addr,
+			       u8 flags)
 {
-	if (!(entry->state & IGC_MAC_STATE_IN_USE))
-		return true;
+	int max_entries = adapter->hw.mac.rar_entry_count;
+	struct igc_mac_addr *entry;
+	int i;
 
-	if ((entry->state & IGC_MAC_STATE_SRC_ADDR) !=
-	    (flags & IGC_MAC_STATE_SRC_ADDR))
-		return false;
+	for (i = 0; i < max_entries; i++) {
+		entry = &adapter->mac_table[i];
 
-	if (!ether_addr_equal(addr, entry->addr))
-		return false;
+		if (!(entry->state & IGC_MAC_STATE_IN_USE))
+			continue;
+		if (!ether_addr_equal(addr, entry->addr))
+			continue;
+		if ((entry->state & IGC_MAC_STATE_SRC_ADDR) !=
+		    (flags & IGC_MAC_STATE_SRC_ADDR))
+			continue;
 
-	return true;
+		return i;
+	}
+
+	return -1;
 }
 
-/* Add a MAC filter for 'addr' directing matching traffic to 'queue',
- * 'flags' is used to indicate what kind of match is made, match is by
- * default for the destination address, if matching by source address
- * is desired the flag IGC_MAC_STATE_SRC_ADDR can be used.
- */
-static int igc_add_mac_filter(struct igc_adapter *adapter,
-			      const u8 *addr, const u8 queue)
+static int igc_get_avail_mac_filter_slot(struct igc_adapter *adapter)
 {
-	struct igc_hw *hw = &adapter->hw;
-	int rar_entries = hw->mac.rar_entry_count;
+	int max_entries = adapter->hw.mac.rar_entry_count;
+	struct igc_mac_addr *entry;
 	int i;
 
-	if (is_zero_ether_addr(addr))
+	for (i = 0; i < max_entries; i++) {
+		entry = &adapter->mac_table[i];
+
+		if (!(entry->state & IGC_MAC_STATE_IN_USE))
+			return i;
+	}
+
+	return -1;
+}
+
+/**
+ * igc_add_mac_filter() - Add MAC address filter
+ * @adapter: Pointer to adapter where the filter should be added
+ * @addr: MAC address
+ * @queue: If non-negative, queue assignment feature is enabled and frames
+ *         matching the filter are enqueued onto 'queue'. Otherwise, queue
+ *         assignment is disabled.
+ * @flags: Set IGC_MAC_STATE_SRC_ADDR bit to indicate @address is a source
+ *         address
+ *
+ * Return: 0 in case of success, negative errno code otherwise.
+ */
+int igc_add_mac_filter(struct igc_adapter *adapter, const u8 *addr,
+		       const s8 queue, const u8 flags)
+{
+	struct net_device *dev = adapter->netdev;
+	int index;
+
+	if (!is_valid_ether_addr(addr))
 		return -EINVAL;
+	if (flags & IGC_MAC_STATE_SRC_ADDR)
+		return -ENOTSUPP;
 
-	/* Search for the first empty entry in the MAC table.
-	 * Do not touch entries at the end of the table reserved for the VF MAC
-	 * addresses.
-	 */
-	for (i = 0; i < rar_entries; i++) {
-		if (!igc_mac_entry_can_be_used(&adapter->mac_table[i],
-					       addr, 0))
-			continue;
+	index = igc_find_mac_filter(adapter, addr, flags);
+	if (index >= 0)
+		goto update_queue_assignment;
 
-		ether_addr_copy(adapter->mac_table[i].addr, addr);
-		adapter->mac_table[i].queue = queue;
-		adapter->mac_table[i].state |= IGC_MAC_STATE_IN_USE;
+	index = igc_get_avail_mac_filter_slot(adapter);
+	if (index < 0)
+		return -ENOSPC;
 
-		igc_rar_set_index(adapter, i);
-		return i;
-	}
+	netdev_dbg(dev, "Add MAC address filter: index %d address %pM queue %d",
+		   index, addr, queue);
+
+	ether_addr_copy(adapter->mac_table[index].addr, addr);
+	adapter->mac_table[index].state |= IGC_MAC_STATE_IN_USE | flags;
+update_queue_assignment:
+	adapter->mac_table[index].queue = queue;
 
-	return -ENOSPC;
+	igc_set_mac_filter_hw(adapter, index, addr, queue);
+	return 0;
 }
 
-/* Remove a MAC filter for 'addr' directing matching traffic to
- * 'queue', 'flags' is used to indicate what kind of match need to be
- * removed, match is by default for the destination address, if
- * matching by source address is to be removed the flag
- * IGC_MAC_STATE_SRC_ADDR can be used.
+/**
+ * igc_del_mac_filter() - Delete MAC address filter
+ * @adapter: Pointer to adapter where the filter should be deleted from
+ * @addr: MAC address
+ * @flags: Set IGC_MAC_STATE_SRC_ADDR bit to indicate @address is a source
+ *         address
+ *
+ * Return: 0 in case of success, negative errno code otherwise.
  */
-static int igc_del_mac_filter(struct igc_adapter *adapter,
-			      const u8 *addr, const u8 queue)
+int igc_del_mac_filter(struct igc_adapter *adapter, const u8 *addr,
+		       const u8 flags)
 {
-	struct igc_hw *hw = &adapter->hw;
-	int rar_entries = hw->mac.rar_entry_count;
-	int i;
+	struct net_device *dev = adapter->netdev;
+	struct igc_mac_addr *entry;
+	int index;
 
-	if (is_zero_ether_addr(addr))
+	if (!is_valid_ether_addr(addr))
 		return -EINVAL;
 
-	/* Search for matching entry in the MAC table based on given address
-	 * and queue. Do not touch entries at the end of the table reserved
-	 * for the VF MAC addresses.
-	 */
-	for (i = 0; i < rar_entries; i++) {
-		if (!(adapter->mac_table[i].state & IGC_MAC_STATE_IN_USE))
-			continue;
-		if (adapter->mac_table[i].state != 0)
-			continue;
-		if (adapter->mac_table[i].queue != queue)
-			continue;
-		if (!ether_addr_equal(adapter->mac_table[i].addr, addr))
-			continue;
+	index = igc_find_mac_filter(adapter, addr, flags);
+	if (index < 0)
+		return -ENOENT;
 
-		/* When a filter for the default address is "deleted",
-		 * we return it to its initial configuration
+	entry = &adapter->mac_table[index];
+
+	if (entry->state & IGC_MAC_STATE_DEFAULT) {
+		/* If this is the default filter, we don't actually delete it.
+		 * We just reset to its default value i.e. disable queue
+		 * assignment.
 		 */
-		if (adapter->mac_table[i].state & IGC_MAC_STATE_DEFAULT) {
-			adapter->mac_table[i].state =
-				IGC_MAC_STATE_DEFAULT | IGC_MAC_STATE_IN_USE;
-			adapter->mac_table[i].queue = 0;
-		} else {
-			adapter->mac_table[i].state = 0;
-			adapter->mac_table[i].queue = 0;
-			memset(adapter->mac_table[i].addr, 0, ETH_ALEN);
-		}
+		netdev_dbg(dev, "Disable default MAC filter queue assignment");
 
-		igc_rar_set_index(adapter, i);
-		return 0;
+		entry->queue = -1;
+		igc_set_mac_filter_hw(adapter, 0, addr, entry->queue);
+	} else {
+		netdev_dbg(dev, "Delete MAC address filter: index %d address %pM",
+			   index, addr);
+
+		entry->state = 0;
+		entry->queue = -1;
+		memset(entry->addr, 0, ETH_ALEN);
+		igc_clear_mac_filter_hw(adapter, index);
 	}
 
-	return -ENOENT;
+	return 0;
 }
 
 static int igc_uc_sync(struct net_device *netdev, const unsigned char *addr)
 {
 	struct igc_adapter *adapter = netdev_priv(netdev);
-	int ret;
-
-	ret = igc_add_mac_filter(adapter, addr, adapter->num_rx_queues);
 
-	return min_t(int, ret, 0);
+	return igc_add_mac_filter(adapter, addr, -1, 0);
 }
 
 static int igc_uc_unsync(struct net_device *netdev, const unsigned char *addr)
 {
 	struct igc_adapter *adapter = netdev_priv(netdev);
 
-	igc_del_mac_filter(adapter, addr, adapter->num_rx_queues);
-
-	return 0;
+	return igc_del_mac_filter(adapter, addr, 0);
 }
 
 /**
@@ -2325,7 +2397,9 @@ static void igc_configure(struct igc_adapter *adapter)
 	igc_setup_mrqc(adapter);
 	igc_setup_rctl(adapter);
 
+	igc_set_default_mac_filter(adapter);
 	igc_nfc_filter_restore(adapter);
+
 	igc_configure_tx(adapter);
 	igc_configure_rx(adapter);
 
@@ -3458,9 +3532,6 @@ static void igc_nfc_filter_exit(struct igc_adapter *adapter)
 	hlist_for_each_entry(rule, &adapter->nfc_filter_list, nfc_node)
 		igc_erase_filter(adapter, rule);
 
-	hlist_for_each_entry(rule, &adapter->cls_flower_list, nfc_node)
-		igc_erase_filter(adapter, rule);
-
 	spin_unlock(&adapter->nfc_lock);
 }
 
@@ -3689,106 +3760,6 @@ igc_features_check(struct sk_buff *skb, struct net_device *dev,
 	return features;
 }
 
-/* Add a MAC filter for 'addr' directing matching traffic to 'queue',
- * 'flags' is used to indicate what kind of match is made, match is by
- * default for the destination address, if matching by source address
- * is desired the flag IGC_MAC_STATE_SRC_ADDR can be used.
- */
-static int igc_add_mac_filter_flags(struct igc_adapter *adapter,
-				    const u8 *addr, const u8 queue,
-				    const u8 flags)
-{
-	struct igc_hw *hw = &adapter->hw;
-	int rar_entries = hw->mac.rar_entry_count;
-	int i;
-
-	if (is_zero_ether_addr(addr))
-		return -EINVAL;
-
-	/* Search for the first empty entry in the MAC table.
-	 * Do not touch entries at the end of the table reserved for the VF MAC
-	 * addresses.
-	 */
-	for (i = 0; i < rar_entries; i++) {
-		if (!igc_mac_entry_can_be_used(&adapter->mac_table[i],
-					       addr, flags))
-			continue;
-
-		ether_addr_copy(adapter->mac_table[i].addr, addr);
-		adapter->mac_table[i].queue = queue;
-		adapter->mac_table[i].state |= IGC_MAC_STATE_IN_USE | flags;
-
-		igc_rar_set_index(adapter, i);
-		return i;
-	}
-
-	return -ENOSPC;
-}
-
-int igc_add_mac_steering_filter(struct igc_adapter *adapter,
-				const u8 *addr, u8 queue, u8 flags)
-{
-	return igc_add_mac_filter_flags(adapter, addr, queue,
-					IGC_MAC_STATE_QUEUE_STEERING | flags);
-}
-
-/* Remove a MAC filter for 'addr' directing matching traffic to
- * 'queue', 'flags' is used to indicate what kind of match need to be
- * removed, match is by default for the destination address, if
- * matching by source address is to be removed the flag
- * IGC_MAC_STATE_SRC_ADDR can be used.
- */
-static int igc_del_mac_filter_flags(struct igc_adapter *adapter,
-				    const u8 *addr, const u8 queue,
-				    const u8 flags)
-{
-	struct igc_hw *hw = &adapter->hw;
-	int rar_entries = hw->mac.rar_entry_count;
-	int i;
-
-	if (is_zero_ether_addr(addr))
-		return -EINVAL;
-
-	/* Search for matching entry in the MAC table based on given address
-	 * and queue. Do not touch entries at the end of the table reserved
-	 * for the VF MAC addresses.
-	 */
-	for (i = 0; i < rar_entries; i++) {
-		if (!(adapter->mac_table[i].state & IGC_MAC_STATE_IN_USE))
-			continue;
-		if ((adapter->mac_table[i].state & flags) != flags)
-			continue;
-		if (adapter->mac_table[i].queue != queue)
-			continue;
-		if (!ether_addr_equal(adapter->mac_table[i].addr, addr))
-			continue;
-
-		/* When a filter for the default address is "deleted",
-		 * we return it to its initial configuration
-		 */
-		if (adapter->mac_table[i].state & IGC_MAC_STATE_DEFAULT) {
-			adapter->mac_table[i].state =
-				IGC_MAC_STATE_DEFAULT | IGC_MAC_STATE_IN_USE;
-		} else {
-			adapter->mac_table[i].state = 0;
-			adapter->mac_table[i].queue = 0;
-			memset(adapter->mac_table[i].addr, 0, ETH_ALEN);
-		}
-
-		igc_rar_set_index(adapter, i);
-		return 0;
-	}
-
-	return -ENOENT;
-}
-
-int igc_del_mac_steering_filter(struct igc_adapter *adapter,
-				const u8 *addr, u8 queue, u8 flags)
-{
-	return igc_del_mac_filter_flags(adapter, addr, queue,
-					IGC_MAC_STATE_QUEUE_STEERING | flags);
-}
-
 static void igc_tsync_interrupt(struct igc_adapter *adapter)
 {
 	struct igc_hw *hw = &adapter->hw;
@@ -4009,7 +3980,6 @@ static void igc_watchdog_task(struct work_struct *work)
 	struct igc_hw *hw = &adapter->hw;
 	struct igc_phy_info *phy = &hw->phy;
 	u16 phy_data, retry_count = 20;
-	u32 connsw;
 	u32 link;
 	int i;
 
@@ -4022,14 +3992,6 @@ static void igc_watchdog_task(struct work_struct *work)
 			link = false;
 	}
 
-	/* Force link down if we have fiber to swap to */
-	if (adapter->flags & IGC_FLAG_MAS_ENABLE) {
-		if (hw->phy.media_type == igc_media_type_copper) {
-			connsw = rd32(IGC_CONNSW);
-			if (!(connsw & IGC_CONNSW_AUTOSENSE_EN))
-				link = 0;
-		}
-	}
 	if (link) {
 		/* Cancel scheduled suspend requests. */
 		pm_runtime_resume(netdev->dev.parent);
@@ -4491,6 +4453,158 @@ static int igc_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 	}
 }
 
+static int igc_save_launchtime_params(struct igc_adapter *adapter, int queue,
+				      bool enable)
+{
+	struct igc_ring *ring;
+	int i;
+
+	if (queue < 0 || queue >= adapter->num_tx_queues)
+		return -EINVAL;
+
+	ring = adapter->tx_ring[queue];
+	ring->launchtime_enable = enable;
+
+	if (adapter->base_time)
+		return 0;
+
+	adapter->cycle_time = NSEC_PER_SEC;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		ring = adapter->tx_ring[i];
+		ring->start_time = 0;
+		ring->end_time = NSEC_PER_SEC;
+	}
+
+	return 0;
+}
+
+static bool validate_schedule(const struct tc_taprio_qopt_offload *qopt)
+{
+	int queue_uses[IGC_MAX_TX_QUEUES] = { };
+	size_t n;
+
+	if (qopt->cycle_time_extension)
+		return false;
+
+	for (n = 0; n < qopt->num_entries; n++) {
+		const struct tc_taprio_sched_entry *e;
+		int i;
+
+		e = &qopt->entries[n];
+
+		/* i225 only supports "global" frame preemption
+		 * settings.
+		 */
+		if (e->command != TC_TAPRIO_CMD_SET_GATES)
+			return false;
+
+		for (i = 0; i < IGC_MAX_TX_QUEUES; i++) {
+			if (e->gate_mask & BIT(i))
+				queue_uses[i]++;
+
+			if (queue_uses[i] > 1)
+				return false;
+		}
+	}
+
+	return true;
+}
+
+static int igc_tsn_enable_launchtime(struct igc_adapter *adapter,
+				     struct tc_etf_qopt_offload *qopt)
+{
+	struct igc_hw *hw = &adapter->hw;
+	int err;
+
+	if (hw->mac.type != igc_i225)
+		return -EOPNOTSUPP;
+
+	err = igc_save_launchtime_params(adapter, qopt->queue, qopt->enable);
+	if (err)
+		return err;
+
+	return igc_tsn_offload_apply(adapter);
+}
+
+static int igc_save_qbv_schedule(struct igc_adapter *adapter,
+				 struct tc_taprio_qopt_offload *qopt)
+{
+	u32 start_time = 0, end_time = 0;
+	size_t n;
+
+	if (!qopt->enable) {
+		adapter->base_time = 0;
+		return 0;
+	}
+
+	if (adapter->base_time)
+		return -EALREADY;
+
+	if (!validate_schedule(qopt))
+		return -EINVAL;
+
+	adapter->cycle_time = qopt->cycle_time;
+	adapter->base_time = qopt->base_time;
+
+	/* FIXME: be a little smarter about cases when the gate for a
+	 * queue stays open for more than one entry.
+	 */
+	for (n = 0; n < qopt->num_entries; n++) {
+		struct tc_taprio_sched_entry *e = &qopt->entries[n];
+		int i;
+
+		end_time += e->interval;
+
+		for (i = 0; i < IGC_MAX_TX_QUEUES; i++) {
+			struct igc_ring *ring = adapter->tx_ring[i];
+
+			if (!(e->gate_mask & BIT(i)))
+				continue;
+
+			ring->start_time = start_time;
+			ring->end_time = end_time;
+		}
+
+		start_time += e->interval;
+	}
+
+	return 0;
+}
+
+static int igc_tsn_enable_qbv_scheduling(struct igc_adapter *adapter,
+					 struct tc_taprio_qopt_offload *qopt)
+{
+	struct igc_hw *hw = &adapter->hw;
+	int err;
+
+	if (hw->mac.type != igc_i225)
+		return -EOPNOTSUPP;
+
+	err = igc_save_qbv_schedule(adapter, qopt);
+	if (err)
+		return err;
+
+	return igc_tsn_offload_apply(adapter);
+}
+
+static int igc_setup_tc(struct net_device *dev, enum tc_setup_type type,
+			void *type_data)
+{
+	struct igc_adapter *adapter = netdev_priv(dev);
+
+	switch (type) {
+	case TC_SETUP_QDISC_TAPRIO:
+		return igc_tsn_enable_qbv_scheduling(adapter, type_data);
+
+	case TC_SETUP_QDISC_ETF:
+		return igc_tsn_enable_launchtime(adapter, type_data);
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static const struct net_device_ops igc_netdev_ops = {
 	.ndo_open		= igc_open,
 	.ndo_stop		= igc_close,
@@ -4503,6 +4617,7 @@ static const struct net_device_ops igc_netdev_ops = {
 	.ndo_set_features	= igc_set_features,
 	.ndo_features_check	= igc_features_check,
 	.ndo_do_ioctl		= igc_ioctl,
+	.ndo_setup_tc		= igc_setup_tc,
 };
 
 /* PCIe configuration access */
@@ -4726,6 +4841,17 @@ static int igc_probe(struct pci_dev *pdev,
 	netdev->features |= NETIF_F_RXCSUM;
 	netdev->features |= NETIF_F_HW_CSUM;
 	netdev->features |= NETIF_F_SCTP_CRC;
+	netdev->features |= NETIF_F_HW_TC;
+
+#define IGC_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \
+				  NETIF_F_GSO_GRE_CSUM | \
+				  NETIF_F_GSO_IPXIP4 | \
+				  NETIF_F_GSO_IPXIP6 | \
+				  NETIF_F_GSO_UDP_TUNNEL | \
+				  NETIF_F_GSO_UDP_TUNNEL_CSUM)
+
+	netdev->gso_partial_features = IGC_GSO_PARTIAL_FEATURES;
+	netdev->features |= NETIF_F_GSO_PARTIAL | IGC_GSO_PARTIAL_FEATURES;
 
 	/* setup the private structure */
 	err = igc_sw_init(adapter);
@@ -4825,7 +4951,7 @@ static int igc_probe(struct pci_dev *pdev,
 	pcie_print_link_status(pdev);
 	netdev_info(netdev, "MAC: %pM\n", netdev->dev_addr);
 
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	pm_runtime_put_noidle(&pdev->dev);
 
diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h
index d4af53a80f11..6093cde2351c 100644
--- a/drivers/net/ethernet/intel/igc/igc_regs.h
+++ b/drivers/net/ethernet/intel/igc/igc_regs.h
@@ -231,6 +231,18 @@
 
 #define IGC_RXPBS	0x02404  /* Rx Packet Buffer Size - RW */
 
+/* Transmit Scheduling Registers */
+#define IGC_TQAVCTRL		0x3570
+#define IGC_TXQCTL(_n)		(0x3344 + 0x4 * (_n))
+#define IGC_BASET_L		0x3314
+#define IGC_BASET_H		0x3318
+#define IGC_QBVCYCLET		0x331C
+#define IGC_QBVCYCLET_S		0x3320
+
+#define IGC_STQT(_n)		(0x3324 + 0x4 * (_n))
+#define IGC_ENDQT(_n)		(0x3334 + 0x4 * (_n))
+#define IGC_DTXMXPKTSZ		0x355C
+
 /* System Time Registers */
 #define IGC_SYSTIML	0x0B600  /* System time register Low - RO */
 #define IGC_SYSTIMH	0x0B604  /* System time register High - RO */
diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c
new file mode 100644
index 000000000000..174103c4bea6
--- /dev/null
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c)  2019 Intel Corporation */
+
+#include "igc.h"
+#include "igc_tsn.h"
+
+static bool is_any_launchtime(struct igc_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igc_ring *ring = adapter->tx_ring[i];
+
+		if (ring->launchtime_enable)
+			return true;
+	}
+
+	return false;
+}
+
+/* Returns the TSN specific registers to their default values after
+ * TSN offloading is disabled.
+ */
+static int igc_tsn_disable_offload(struct igc_adapter *adapter)
+{
+	struct igc_hw *hw = &adapter->hw;
+	u32 tqavctrl;
+	int i;
+
+	if (!(adapter->flags & IGC_FLAG_TSN_QBV_ENABLED))
+		return 0;
+
+	adapter->cycle_time = 0;
+
+	wr32(IGC_TXPBS, I225_TXPBSIZE_DEFAULT);
+	wr32(IGC_DTXMXPKTSZ, IGC_DTXMXPKTSZ_DEFAULT);
+
+	tqavctrl = rd32(IGC_TQAVCTRL);
+	tqavctrl &= ~(IGC_TQAVCTRL_TRANSMIT_MODE_TSN |
+		      IGC_TQAVCTRL_ENHANCED_QAV);
+	wr32(IGC_TQAVCTRL, tqavctrl);
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igc_ring *ring = adapter->tx_ring[i];
+
+		ring->start_time = 0;
+		ring->end_time = 0;
+		ring->launchtime_enable = false;
+
+		wr32(IGC_TXQCTL(i), 0);
+		wr32(IGC_STQT(i), 0);
+		wr32(IGC_ENDQT(i), NSEC_PER_SEC);
+	}
+
+	wr32(IGC_QBVCYCLET_S, NSEC_PER_SEC);
+	wr32(IGC_QBVCYCLET, NSEC_PER_SEC);
+
+	adapter->flags &= ~IGC_FLAG_TSN_QBV_ENABLED;
+
+	return 0;
+}
+
+static int igc_tsn_enable_offload(struct igc_adapter *adapter)
+{
+	struct igc_hw *hw = &adapter->hw;
+	u32 tqavctrl, baset_l, baset_h;
+	u32 sec, nsec, cycle;
+	ktime_t base_time, systim;
+	int i;
+
+	if (adapter->flags & IGC_FLAG_TSN_QBV_ENABLED)
+		return 0;
+
+	cycle = adapter->cycle_time;
+	base_time = adapter->base_time;
+
+	wr32(IGC_TSAUXC, 0);
+	wr32(IGC_DTXMXPKTSZ, IGC_DTXMXPKTSZ_TSN);
+	wr32(IGC_TXPBS, IGC_TXPBSIZE_TSN);
+
+	tqavctrl = rd32(IGC_TQAVCTRL);
+	tqavctrl |= IGC_TQAVCTRL_TRANSMIT_MODE_TSN | IGC_TQAVCTRL_ENHANCED_QAV;
+	wr32(IGC_TQAVCTRL, tqavctrl);
+
+	wr32(IGC_QBVCYCLET_S, cycle);
+	wr32(IGC_QBVCYCLET, cycle);
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igc_ring *ring = adapter->tx_ring[i];
+		u32 txqctl = 0;
+
+		wr32(IGC_STQT(i), ring->start_time);
+		wr32(IGC_ENDQT(i), ring->end_time);
+
+		if (adapter->base_time) {
+			/* If we have a base_time we are in "taprio"
+			 * mode and we need to be strict about the
+			 * cycles: only transmit a packet if it can be
+			 * completed during that cycle.
+			 */
+			txqctl |= IGC_TXQCTL_STRICT_CYCLE |
+				IGC_TXQCTL_STRICT_END;
+		}
+
+		if (ring->launchtime_enable)
+			txqctl |= IGC_TXQCTL_QUEUE_MODE_LAUNCHT;
+
+		wr32(IGC_TXQCTL(i), txqctl);
+	}
+
+	nsec = rd32(IGC_SYSTIML);
+	sec = rd32(IGC_SYSTIMH);
+
+	systim = ktime_set(sec, nsec);
+
+	if (ktime_compare(systim, base_time) > 0) {
+		s64 n;
+
+		n = div64_s64(ktime_sub_ns(systim, base_time), cycle);
+		base_time = ktime_add_ns(base_time, (n + 1) * cycle);
+	}
+
+	baset_h = div_s64_rem(base_time, NSEC_PER_SEC, &baset_l);
+
+	wr32(IGC_BASET_H, baset_h);
+	wr32(IGC_BASET_L, baset_l);
+
+	adapter->flags |= IGC_FLAG_TSN_QBV_ENABLED;
+
+	return 0;
+}
+
+int igc_tsn_offload_apply(struct igc_adapter *adapter)
+{
+	bool is_any_enabled = adapter->base_time || is_any_launchtime(adapter);
+
+	if (!(adapter->flags & IGC_FLAG_TSN_QBV_ENABLED) && !is_any_enabled)
+		return 0;
+
+	if (!is_any_enabled) {
+		int err = igc_tsn_disable_offload(adapter);
+
+		if (err < 0)
+			return err;
+
+		/* The BASET registers aren't cleared when writing
+		 * into them, force a reset if the interface is
+		 * running.
+		 */
+		if (netif_running(adapter->netdev))
+			schedule_work(&adapter->reset_task);
+
+		return 0;
+	}
+
+	return igc_tsn_enable_offload(adapter);
+}
diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.h b/drivers/net/ethernet/intel/igc/igc_tsn.h
new file mode 100644
index 000000000000..f76bc86ddccd
--- /dev/null
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c)  2020 Intel Corporation */
+
+#ifndef _IGC_TSN_H_
+#define _IGC_TSN_H_
+
+int igc_tsn_offload_apply(struct igc_adapter *adapter);
+
+#endif /* _IGC_BASE_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 018c283a0ac4..0b1c653b3449 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -309,7 +309,7 @@ static inline void __iomem *otx2_get_regaddr(struct otx2_nic *nic, u64 offset)
 	default:
 		blkaddr = BLKADDR_RVUM;
 		break;
-	};
+	}
 
 	offset &= ~(RVU_FUNC_BLKADDR_MASK << RVU_FUNC_BLKADDR_SHIFT);
 	offset |= (blkaddr << RVU_FUNC_BLKADDR_SHIFT);
diff --git a/drivers/net/ethernet/mellanox/mlx4/crdump.c b/drivers/net/ethernet/mellanox/mlx4/crdump.c
index 73eae80e1cb7..ac5468b77488 100644
--- a/drivers/net/ethernet/mellanox/mlx4/crdump.c
+++ b/drivers/net/ethernet/mellanox/mlx4/crdump.c
@@ -197,6 +197,7 @@ int mlx4_crdump_collect(struct mlx4_dev *dev)
 	err = devlink_region_snapshot_id_get(devlink, &id);
 	if (err) {
 		mlx4_err(dev, "crdump: devlink get snapshot id err %d\n", err);
+		iounmap(cr_space);
 		return err;
 	}
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index db3552f2d087..787139219813 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -946,7 +946,7 @@ int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget)
 		xdp_tx_cq = priv->tx_cq[TX_XDP][cq->ring];
 		if (xdp_tx_cq->xdp_busy) {
 			clean_complete = mlx4_en_process_tx_cq(dev, xdp_tx_cq,
-							       budget);
+							       budget) < budget;
 			xdp_tx_cq->xdp_busy = !clean_complete;
 		}
 	}
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index a30edb436f4a..9dff7b086c9f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -392,8 +392,8 @@ int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring)
 	return cnt;
 }
 
-bool mlx4_en_process_tx_cq(struct net_device *dev,
-			   struct mlx4_en_cq *cq, int napi_budget)
+int mlx4_en_process_tx_cq(struct net_device *dev,
+			  struct mlx4_en_cq *cq, int napi_budget)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
 	struct mlx4_cq *mcq = &cq->mcq;
@@ -415,7 +415,7 @@ bool mlx4_en_process_tx_cq(struct net_device *dev,
 	u32 ring_cons;
 
 	if (unlikely(!priv->port_up))
-		return true;
+		return 0;
 
 	netdev_txq_bql_complete_prefetchw(ring->tx_queue);
 
@@ -492,7 +492,7 @@ bool mlx4_en_process_tx_cq(struct net_device *dev,
 	WRITE_ONCE(ring->cons, ring_cons + txbbs_skipped);
 
 	if (cq->type == TX_XDP)
-		return done < budget;
+		return done;
 
 	netdev_tx_completed_queue(ring->tx_queue, packets, bytes);
 
@@ -504,7 +504,7 @@ bool mlx4_en_process_tx_cq(struct net_device *dev,
 		ring->wake_queue++;
 	}
 
-	return done < budget;
+	return done;
 }
 
 void mlx4_en_tx_irq(struct mlx4_cq *mcq)
@@ -524,14 +524,14 @@ int mlx4_en_poll_tx_cq(struct napi_struct *napi, int budget)
 	struct mlx4_en_cq *cq = container_of(napi, struct mlx4_en_cq, napi);
 	struct net_device *dev = cq->dev;
 	struct mlx4_en_priv *priv = netdev_priv(dev);
-	bool clean_complete;
+	int work_done;
 
-	clean_complete = mlx4_en_process_tx_cq(dev, cq, budget);
-	if (!clean_complete)
+	work_done = mlx4_en_process_tx_cq(dev, cq, budget);
+	if (work_done >= budget)
 		return budget;
 
-	napi_complete(napi);
-	mlx4_en_arm_cq(priv, cq);
+	if (napi_complete_done(napi, work_done))
+		mlx4_en_arm_cq(priv, cq);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 630f15977f09..9f5603612960 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -737,8 +737,8 @@ int mlx4_en_process_rx_cq(struct net_device *dev,
 			  int budget);
 int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget);
 int mlx4_en_poll_tx_cq(struct napi_struct *napi, int budget);
-bool mlx4_en_process_tx_cq(struct net_device *dev,
-			   struct mlx4_en_cq *cq, int napi_budget);
+int mlx4_en_process_tx_cq(struct net_device *dev,
+			  struct mlx4_en_cq *cq, int napi_budget);
 u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
 			 struct mlx4_en_tx_ring *ring,
 			 int index, u64 timestamp,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
index 6d32915000fc..d3c7dbd7f1d5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_MLX5_CORE) += mlx5_core.o
 # mlx5 core basic
 #
 mlx5_core-y :=	main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
-		health.o mcg.o cq.o alloc.o qp.o port.o mr.o pd.o \
+		health.o mcg.o cq.o alloc.o port.o mr.o pd.o \
 		transobj.o vport.o sriov.o fs_cmd.o fs_core.o pci_irq.o \
 		fs_counters.o rl.o lag.o dev.o events.o wq.o lib/gid.o \
 		lib/devcom.o lib/pci_vsc.o lib/dm.o diag/fs_tracepoint.o \
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec.c
index eddc34e4a762..8a4985d8cbfe 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec.c
@@ -58,12 +58,21 @@ int mlx5_accel_ipsec_counters_read(struct mlx5_core_dev *mdev, u64 *counters,
 
 void *mlx5_accel_esp_create_hw_context(struct mlx5_core_dev *mdev,
 				       struct mlx5_accel_esp_xfrm *xfrm,
-				       const __be32 saddr[4],
-				       const __be32 daddr[4],
-				       const __be32 spi, bool is_ipv6)
+				       u32 *sa_handle)
 {
-	return mlx5_fpga_ipsec_create_sa_ctx(mdev, xfrm, saddr, daddr,
-					     spi, is_ipv6);
+	__be32 saddr[4] = {}, daddr[4] = {};
+
+	if (!xfrm->attrs.is_ipv6) {
+		saddr[3] = xfrm->attrs.saddr.a4;
+		daddr[3] = xfrm->attrs.daddr.a4;
+	} else {
+		memcpy(saddr, xfrm->attrs.saddr.a6, sizeof(saddr));
+		memcpy(daddr, xfrm->attrs.daddr.a6, sizeof(daddr));
+	}
+
+	return mlx5_fpga_ipsec_create_sa_ctx(mdev, xfrm, saddr,
+					     daddr, xfrm->attrs.spi,
+					     xfrm->attrs.is_ipv6, sa_handle);
 }
 
 void mlx5_accel_esp_free_hw_context(void *context)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec.h b/drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec.h
index 530e428d46ab..e89747674712 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec.h
@@ -48,9 +48,7 @@ int mlx5_accel_ipsec_counters_read(struct mlx5_core_dev *mdev, u64 *counters,
 
 void *mlx5_accel_esp_create_hw_context(struct mlx5_core_dev *mdev,
 				       struct mlx5_accel_esp_xfrm *xfrm,
-				       const __be32 saddr[4],
-				       const __be32 daddr[4],
-				       const __be32 spi, bool is_ipv6);
+				       u32 *sa_handle);
 void mlx5_accel_esp_free_hw_context(void *context);
 
 int mlx5_accel_ipsec_init(struct mlx5_core_dev *mdev);
@@ -64,9 +62,7 @@ void mlx5_accel_ipsec_cleanup(struct mlx5_core_dev *mdev);
 static inline void *
 mlx5_accel_esp_create_hw_context(struct mlx5_core_dev *mdev,
 				 struct mlx5_accel_esp_xfrm *xfrm,
-				 const __be32 saddr[4],
-				 const __be32 daddr[4],
-				 const __be32 spi, bool is_ipv6)
+				 u32 *sa_handle)
 {
 	return NULL;
 }
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cq.c b/drivers/net/ethernet/mellanox/mlx5/core/cq.c
index 818edc63e428..8379b24cb838 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cq.c
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 #include <linux/hardirq.h>
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include <rdma/ib_verbs.h>
 #include <linux/mlx5/cq.h>
 #include "mlx5_core.h"
@@ -91,8 +90,7 @@ int mlx5_core_create_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
 			u32 *in, int inlen, u32 *out, int outlen)
 {
 	int eqn = MLX5_GET(cqc, MLX5_ADDR_OF(create_cq_in, in, cq_context), c_eqn);
-	u32 dout[MLX5_ST_SZ_DW(destroy_cq_out)];
-	u32 din[MLX5_ST_SZ_DW(destroy_cq_in)];
+	u32 din[MLX5_ST_SZ_DW(destroy_cq_in)] = {};
 	struct mlx5_eq_comp *eq;
 	int err;
 
@@ -142,20 +140,17 @@ int mlx5_core_create_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
 err_cq_add:
 	mlx5_eq_del_cq(&eq->core, cq);
 err_cmd:
-	memset(din, 0, sizeof(din));
-	memset(dout, 0, sizeof(dout));
 	MLX5_SET(destroy_cq_in, din, opcode, MLX5_CMD_OP_DESTROY_CQ);
 	MLX5_SET(destroy_cq_in, din, cqn, cq->cqn);
 	MLX5_SET(destroy_cq_in, din, uid, cq->uid);
-	mlx5_cmd_exec(dev, din, sizeof(din), dout, sizeof(dout));
+	mlx5_cmd_exec_in(dev, destroy_cq, din);
 	return err;
 }
 EXPORT_SYMBOL(mlx5_core_create_cq);
 
 int mlx5_core_destroy_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq)
 {
-	u32 out[MLX5_ST_SZ_DW(destroy_cq_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(destroy_cq_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_cq_in)] = {};
 	int err;
 
 	mlx5_eq_del_cq(mlx5_get_async_eq(dev), cq);
@@ -164,7 +159,7 @@ int mlx5_core_destroy_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq)
 	MLX5_SET(destroy_cq_in, in, opcode, MLX5_CMD_OP_DESTROY_CQ);
 	MLX5_SET(destroy_cq_in, in, cqn, cq->cqn);
 	MLX5_SET(destroy_cq_in, in, uid, cq->uid);
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_in(dev, destroy_cq, in);
 	if (err)
 		return err;
 
@@ -179,20 +174,20 @@ int mlx5_core_destroy_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq)
 EXPORT_SYMBOL(mlx5_core_destroy_cq);
 
 int mlx5_core_query_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
-		       u32 *out, int outlen)
+		       u32 *out)
 {
-	u32 in[MLX5_ST_SZ_DW(query_cq_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(query_cq_in)] = {};
 
 	MLX5_SET(query_cq_in, in, opcode, MLX5_CMD_OP_QUERY_CQ);
 	MLX5_SET(query_cq_in, in, cqn, cq->cqn);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
+	return mlx5_cmd_exec_inout(dev, query_cq, in, out);
 }
 EXPORT_SYMBOL(mlx5_core_query_cq);
 
 int mlx5_core_modify_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
 			u32 *in, int inlen)
 {
-	u32 out[MLX5_ST_SZ_DW(modify_cq_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(modify_cq_out)] = {};
 
 	MLX5_SET(modify_cq_in, in, opcode, MLX5_CMD_OP_MODIFY_CQ);
 	MLX5_SET(modify_cq_in, in, uid, cq->uid);
@@ -205,7 +200,7 @@ int mlx5_core_modify_cq_moderation(struct mlx5_core_dev *dev,
 				   u16 cq_period,
 				   u16 cq_max_count)
 {
-	u32 in[MLX5_ST_SZ_DW(modify_cq_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(modify_cq_in)] = {};
 	void *cqc;
 
 	MLX5_SET(modify_cq_in, in, cqn, cq->cqn);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c b/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c
index 04854e5fbcd7..6409090b3ec5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c
@@ -101,15 +101,15 @@ void mlx5_unregister_debugfs(void)
 
 void mlx5_qp_debugfs_init(struct mlx5_core_dev *dev)
 {
-	atomic_set(&dev->num_qps, 0);
-
 	dev->priv.qp_debugfs = debugfs_create_dir("QPs",  dev->priv.dbg_root);
 }
+EXPORT_SYMBOL(mlx5_qp_debugfs_init);
 
 void mlx5_qp_debugfs_cleanup(struct mlx5_core_dev *dev)
 {
 	debugfs_remove_recursive(dev->priv.qp_debugfs);
 }
+EXPORT_SYMBOL(mlx5_qp_debugfs_cleanup);
 
 void mlx5_eq_debugfs_init(struct mlx5_core_dev *dev)
 {
@@ -202,42 +202,37 @@ void mlx5_cq_debugfs_cleanup(struct mlx5_core_dev *dev)
 static u64 qp_read_field(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp,
 			 int index, int *is_str)
 {
-	int outlen = MLX5_ST_SZ_BYTES(query_qp_out);
-	struct mlx5_qp_context *ctx;
+	u32 out[MLX5_ST_SZ_BYTES(query_qp_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_qp_in)] = {};
 	u64 param = 0;
-	u32 *out;
+	int state;
+	u32 *qpc;
 	int err;
-	int no_sq;
 
-	out = kzalloc(outlen, GFP_KERNEL);
-	if (!out)
-		return param;
-
-	err = mlx5_core_qp_query(dev, qp, out, outlen);
-	if (err) {
-		mlx5_core_warn(dev, "failed to query qp err=%d\n", err);
-		goto out;
-	}
+	MLX5_SET(query_qp_in, in, opcode, MLX5_CMD_OP_QUERY_QP);
+	MLX5_SET(query_qp_in, in, qpn, qp->qpn);
+	err = mlx5_cmd_exec_inout(dev, query_qp, in, out);
+	if (err)
+		return 0;
 
 	*is_str = 0;
 
-	/* FIXME: use MLX5_GET rather than mlx5_qp_context manual struct */
-	ctx = (struct mlx5_qp_context *)MLX5_ADDR_OF(query_qp_out, out, qpc);
-
+	qpc = MLX5_ADDR_OF(query_qp_out, out, qpc);
 	switch (index) {
 	case QP_PID:
 		param = qp->pid;
 		break;
 	case QP_STATE:
-		param = (unsigned long)mlx5_qp_state_str(be32_to_cpu(ctx->flags) >> 28);
+		state = MLX5_GET(qpc, qpc, state);
+		param = (unsigned long)mlx5_qp_state_str(state);
 		*is_str = 1;
 		break;
 	case QP_XPORT:
-		param = (unsigned long)mlx5_qp_type_str((be32_to_cpu(ctx->flags) >> 16) & 0xff);
+		param = (unsigned long)mlx5_qp_type_str(MLX5_GET(qpc, qpc, st));
 		*is_str = 1;
 		break;
 	case QP_MTU:
-		switch (ctx->mtu_msgmax >> 5) {
+		switch (MLX5_GET(qpc, qpc, mtu)) {
 		case IB_MTU_256:
 			param = 256;
 			break;
@@ -258,46 +253,31 @@ static u64 qp_read_field(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp,
 		}
 		break;
 	case QP_N_RECV:
-		param = 1 << ((ctx->rq_size_stride >> 3) & 0xf);
+		param = 1 << MLX5_GET(qpc, qpc, log_rq_size);
 		break;
 	case QP_RECV_SZ:
-		param = 1 << ((ctx->rq_size_stride & 7) + 4);
+		param = 1 << (MLX5_GET(qpc, qpc, log_rq_stride) + 4);
 		break;
 	case QP_N_SEND:
-		no_sq = be16_to_cpu(ctx->sq_crq_size) >> 15;
-		if (!no_sq)
-			param = 1 << (be16_to_cpu(ctx->sq_crq_size) >> 11);
-		else
-			param = 0;
+		if (!MLX5_GET(qpc, qpc, no_sq))
+			param = 1 << MLX5_GET(qpc, qpc, log_sq_size);
 		break;
 	case QP_LOG_PG_SZ:
-		param = (be32_to_cpu(ctx->log_pg_sz_remote_qpn) >> 24) & 0x1f;
-		param += 12;
+		param = MLX5_GET(qpc, qpc, log_page_size) + 12;
 		break;
 	case QP_RQPN:
-		param = be32_to_cpu(ctx->log_pg_sz_remote_qpn) & 0xffffff;
+		param = MLX5_GET(qpc, qpc, remote_qpn);
 		break;
 	}
 
-out:
-	kfree(out);
 	return param;
 }
 
-static int mlx5_core_eq_query(struct mlx5_core_dev *dev, struct mlx5_eq *eq,
-			      u32 *out, int outlen)
-{
-	u32 in[MLX5_ST_SZ_DW(query_eq_in)] = {};
-
-	MLX5_SET(query_eq_in, in, opcode, MLX5_CMD_OP_QUERY_EQ);
-	MLX5_SET(query_eq_in, in, eq_number, eq->eqn);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
-}
-
 static u64 eq_read_field(struct mlx5_core_dev *dev, struct mlx5_eq *eq,
 			 int index)
 {
 	int outlen = MLX5_ST_SZ_BYTES(query_eq_out);
+	u32 in[MLX5_ST_SZ_DW(query_eq_in)] = {};
 	u64 param = 0;
 	void *ctx;
 	u32 *out;
@@ -307,7 +287,9 @@ static u64 eq_read_field(struct mlx5_core_dev *dev, struct mlx5_eq *eq,
 	if (!out)
 		return param;
 
-	err = mlx5_core_eq_query(dev, eq, out, outlen);
+	MLX5_SET(query_eq_in, in, opcode, MLX5_CMD_OP_QUERY_EQ);
+	MLX5_SET(query_eq_in, in, eq_number, eq->eqn);
+	err = mlx5_cmd_exec_inout(dev, query_eq, in, out);
 	if (err) {
 		mlx5_core_warn(dev, "failed to query eq\n");
 		goto out;
@@ -344,7 +326,7 @@ static u64 cq_read_field(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
 	if (!out)
 		return param;
 
-	err = mlx5_core_query_cq(dev, cq, out, outlen);
+	err = mlx5_core_query_cq(dev, cq, out);
 	if (err) {
 		mlx5_core_warn(dev, "failed to query cq\n");
 		goto out;
@@ -461,6 +443,7 @@ int mlx5_debug_qp_add(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp)
 
 	return err;
 }
+EXPORT_SYMBOL(mlx5_debug_qp_add);
 
 void mlx5_debug_qp_remove(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp)
 {
@@ -470,6 +453,7 @@ void mlx5_debug_qp_remove(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp)
 	if (qp->dbg)
 		rem_res_tree(qp->dbg);
 }
+EXPORT_SYMBOL(mlx5_debug_qp_remove);
 
 int mlx5_debug_eq_add(struct mlx5_core_dev *dev, struct mlx5_eq *eq)
 {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
index 5ce6ebbc7f10..a7551274be58 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
@@ -684,7 +684,7 @@ static void mlx5_fw_tracer_handle_traces(struct work_struct *work)
 		get_block_timestamp(tracer, &tmp_trace_block[TRACES_PER_BLOCK - 1]);
 
 	while (block_timestamp > tracer->last_timestamp) {
-		/* Check block override if its not the first block */
+		/* Check block override if it's not the first block */
 		if (!tracer->last_timestamp) {
 			u64 *ts_event;
 			/* To avoid block override be the HW in case of buffer
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ecpf.c b/drivers/net/ethernet/mellanox/mlx5/core/ecpf.c
index d2228e37450f..a894ea98c95a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ecpf.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ecpf.c
@@ -8,33 +8,13 @@ bool mlx5_read_embedded_cpu(struct mlx5_core_dev *dev)
 	return (ioread32be(&dev->iseg->initializing) >> MLX5_ECPU_BIT_NUM) & 1;
 }
 
-static int mlx5_peer_pf_enable_hca(struct mlx5_core_dev *dev)
-{
-	u32 out[MLX5_ST_SZ_DW(enable_hca_out)] = {};
-	u32 in[MLX5_ST_SZ_DW(enable_hca_in)]   = {};
-
-	MLX5_SET(enable_hca_in, in, opcode, MLX5_CMD_OP_ENABLE_HCA);
-	MLX5_SET(enable_hca_in, in, function_id, 0);
-	MLX5_SET(enable_hca_in, in, embedded_cpu_function, 0);
-	return mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out));
-}
-
-static int mlx5_peer_pf_disable_hca(struct mlx5_core_dev *dev)
-{
-	u32 out[MLX5_ST_SZ_DW(disable_hca_out)] = {};
-	u32 in[MLX5_ST_SZ_DW(disable_hca_in)]   = {};
-
-	MLX5_SET(disable_hca_in, in, opcode, MLX5_CMD_OP_DISABLE_HCA);
-	MLX5_SET(disable_hca_in, in, function_id, 0);
-	MLX5_SET(disable_hca_in, in, embedded_cpu_function, 0);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-}
-
 static int mlx5_peer_pf_init(struct mlx5_core_dev *dev)
 {
+	u32 in[MLX5_ST_SZ_DW(enable_hca_in)] = {};
 	int err;
 
-	err = mlx5_peer_pf_enable_hca(dev);
+	MLX5_SET(enable_hca_in, in, opcode, MLX5_CMD_OP_ENABLE_HCA);
+	err = mlx5_cmd_exec_in(dev, enable_hca, in);
 	if (err)
 		mlx5_core_err(dev, "Failed to enable peer PF HCA err(%d)\n",
 			      err);
@@ -44,9 +24,11 @@ static int mlx5_peer_pf_init(struct mlx5_core_dev *dev)
 
 static void mlx5_peer_pf_cleanup(struct mlx5_core_dev *dev)
 {
+	u32 in[MLX5_ST_SZ_DW(disable_hca_in)] = {};
 	int err;
 
-	err = mlx5_peer_pf_disable_hca(dev);
+	MLX5_SET(disable_hca_in, in, opcode, MLX5_CMD_OP_DISABLE_HCA);
+	err = mlx5_cmd_exec_in(dev, disable_hca, in);
 	if (err) {
 		mlx5_core_err(dev, "Failed to disable peer PF HCA err(%d)\n",
 			      err);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 23701c0e36ec..e8508c74eaa8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -1013,7 +1013,7 @@ int mlx5e_redirect_rqt(struct mlx5e_priv *priv, u32 rqtn, int sz,
 void mlx5e_build_indir_tir_ctx_hash(struct mlx5e_rss_params *rss_params,
 				    const struct mlx5e_tirc_config *ttconfig,
 				    void *tirc, bool inner);
-void mlx5e_modify_tirs_hash(struct mlx5e_priv *priv, void *in, int inlen);
+void mlx5e_modify_tirs_hash(struct mlx5e_priv *priv, void *in);
 struct mlx5e_tirc_config mlx5e_tirc_get_default_config(enum mlx5e_traffic_types tt);
 
 struct mlx5e_xsk_param;
@@ -1103,8 +1103,8 @@ void mlx5e_dcbnl_init_app(struct mlx5e_priv *priv);
 void mlx5e_dcbnl_delete_app(struct mlx5e_priv *priv);
 #endif
 
-int mlx5e_create_tir(struct mlx5_core_dev *mdev,
-		     struct mlx5e_tir *tir, u32 *in, int inlen);
+int mlx5e_create_tir(struct mlx5_core_dev *mdev, struct mlx5e_tir *tir,
+		     u32 *in);
 void mlx5e_destroy_tir(struct mlx5_core_dev *mdev,
 		       struct mlx5e_tir *tir);
 int mlx5e_create_mdev_resources(struct mlx5_core_dev *mdev);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/health.c b/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
index 3a199a03d929..7283443868f3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
@@ -43,7 +43,7 @@ int mlx5e_reporter_cq_diagnose(struct mlx5e_cq *cq, struct devlink_fmsg *fmsg)
 	void *cqc;
 	int err;
 
-	err = mlx5_core_query_cq(priv->mdev, &cq->mcq, out, sizeof(out));
+	err = mlx5_core_query_cq(priv->mdev, &cq->mcq, out);
 	if (err)
 		return err;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/monitor_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en/monitor_stats.c
index 7cd5b02e0f10..8fe8b4d6ad1c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/monitor_stats.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/monitor_stats.c
@@ -38,12 +38,11 @@ int mlx5e_monitor_counter_supported(struct mlx5e_priv *priv)
 
 void mlx5e_monitor_counter_arm(struct mlx5e_priv *priv)
 {
-	u32  in[MLX5_ST_SZ_DW(arm_monitor_counter_in)]  = {};
-	u32 out[MLX5_ST_SZ_DW(arm_monitor_counter_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(arm_monitor_counter_in)] = {};
 
 	MLX5_SET(arm_monitor_counter_in, in, opcode,
 		 MLX5_CMD_OP_ARM_MONITOR_COUNTER);
-	mlx5_cmd_exec(priv->mdev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(priv->mdev, arm_monitor_counter, in);
 }
 
 static void mlx5e_monitor_counters_work(struct work_struct *work)
@@ -66,19 +65,6 @@ static int mlx5e_monitor_event_handler(struct notifier_block *nb,
 	return NOTIFY_OK;
 }
 
-static void mlx5e_monitor_counter_start(struct mlx5e_priv *priv)
-{
-	MLX5_NB_INIT(&priv->monitor_counters_nb, mlx5e_monitor_event_handler,
-		     MONITOR_COUNTER);
-	mlx5_eq_notifier_register(priv->mdev, &priv->monitor_counters_nb);
-}
-
-static void mlx5e_monitor_counter_stop(struct mlx5e_priv *priv)
-{
-	mlx5_eq_notifier_unregister(priv->mdev, &priv->monitor_counters_nb);
-	cancel_work_sync(&priv->monitor_counters_work);
-}
-
 static int fill_monitor_counter_ppcnt_set1(int cnt, u32 *in)
 {
 	enum mlx5_monitor_counter_ppcnt ppcnt_cnt;
@@ -118,8 +104,7 @@ static void mlx5e_set_monitor_counter(struct mlx5e_priv *priv)
 	int num_q_counters      = MLX5_CAP_GEN(mdev, num_q_monitor_counters);
 	int num_ppcnt_counters  = !MLX5_CAP_PCAM_REG(mdev, ppcnt) ? 0 :
 				  MLX5_CAP_GEN(mdev, num_ppcnt_monitor_counters);
-	u32  in[MLX5_ST_SZ_DW(set_monitor_counter_in)]  = {};
-	u32 out[MLX5_ST_SZ_DW(set_monitor_counter_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(set_monitor_counter_in)] = {};
 	int q_counter = priv->q_counter;
 	int cnt	= 0;
 
@@ -136,34 +121,31 @@ static void mlx5e_set_monitor_counter(struct mlx5e_priv *priv)
 	MLX5_SET(set_monitor_counter_in, in, opcode,
 		 MLX5_CMD_OP_SET_MONITOR_COUNTER);
 
-	mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(mdev, set_monitor_counter, in);
 }
 
 /* check if mlx5e_monitor_counter_supported before calling this function*/
 void mlx5e_monitor_counter_init(struct mlx5e_priv *priv)
 {
 	INIT_WORK(&priv->monitor_counters_work, mlx5e_monitor_counters_work);
-	mlx5e_monitor_counter_start(priv);
+	MLX5_NB_INIT(&priv->monitor_counters_nb, mlx5e_monitor_event_handler,
+		     MONITOR_COUNTER);
+	mlx5_eq_notifier_register(priv->mdev, &priv->monitor_counters_nb);
+
 	mlx5e_set_monitor_counter(priv);
 	mlx5e_monitor_counter_arm(priv);
 	queue_work(priv->wq, &priv->update_stats_work);
 }
 
-static void mlx5e_monitor_counter_disable(struct mlx5e_priv *priv)
+/* check if mlx5e_monitor_counter_supported before calling this function*/
+void mlx5e_monitor_counter_cleanup(struct mlx5e_priv *priv)
 {
-	u32  in[MLX5_ST_SZ_DW(set_monitor_counter_in)]  = {};
-	u32 out[MLX5_ST_SZ_DW(set_monitor_counter_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(set_monitor_counter_in)] = {};
 
-	MLX5_SET(set_monitor_counter_in, in, num_of_counters, 0);
 	MLX5_SET(set_monitor_counter_in, in, opcode,
 		 MLX5_CMD_OP_SET_MONITOR_COUNTER);
 
-	mlx5_cmd_exec(priv->mdev, in, sizeof(in), out, sizeof(out));
-}
-
-/* check if mlx5e_monitor_counter_supported before calling this function*/
-void mlx5e_monitor_counter_cleanup(struct mlx5e_priv *priv)
-{
-	mlx5e_monitor_counter_disable(priv);
-	mlx5e_monitor_counter_stop(priv);
+	mlx5_cmd_exec_in(priv->mdev, set_monitor_counter, in);
+	mlx5_eq_notifier_unregister(priv->mdev, &priv->monitor_counters_nb);
+	cancel_work_sync(&priv->monitor_counters_work);
 }
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
index a172c5e39710..1079558d292a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
@@ -384,7 +384,7 @@ mlx5_tc_ct_entry_create_nat(struct mlx5_tc_ct_priv *ct_priv,
 	char *modact;
 	int err, i;
 
-	action_size = MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto);
+	action_size = MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto);
 
 	flow_action_for_each(i, act, flow_action) {
 		switch (act->id) {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
index f07b1399744e..9f6967d76053 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
@@ -102,7 +102,7 @@ static inline void
 mlx5e_notify_hw(struct mlx5_wq_cyc *wq, u16 pc, void __iomem *uar_map,
 		struct mlx5_wqe_ctrl_seg *ctrl)
 {
-	ctrl->fm_ce_se = MLX5_WQE_CTRL_CQ_UPDATE;
+	ctrl->fm_ce_se |= MLX5_WQE_CTRL_CQ_UPDATE;
 	/* ensure wqe is visible to device before updating doorbell record */
 	dma_wmb();
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
index 3022463f2284..a6f65d4b2f36 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
@@ -42,6 +42,8 @@
 #include "en/txrx.h"
 
 #if IS_ENABLED(CONFIG_GENEVE)
+#include <net/geneve.h>
+
 static inline bool mlx5_geneve_tx_allowed(struct mlx5_core_dev *mdev)
 {
 	return mlx5_tx_swp_supported(mdev);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
index 29626c6c9c25..92eb3bad4acd 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
@@ -75,18 +75,23 @@ struct xfrm_state *mlx5e_ipsec_sadb_rx_lookup(struct mlx5e_ipsec *ipsec,
 	return ret;
 }
 
-static int mlx5e_ipsec_sadb_rx_add(struct mlx5e_ipsec_sa_entry *sa_entry)
+static int  mlx5e_ipsec_sadb_rx_add(struct mlx5e_ipsec_sa_entry *sa_entry,
+				    unsigned int handle)
 {
 	struct mlx5e_ipsec *ipsec = sa_entry->ipsec;
+	struct mlx5e_ipsec_sa_entry *_sa_entry;
 	unsigned long flags;
-	int ret;
 
-	ret = ida_simple_get(&ipsec->halloc, 1, 0, GFP_KERNEL);
-	if (ret < 0)
-		return ret;
+	rcu_read_lock();
+	hash_for_each_possible_rcu(ipsec->sadb_rx, _sa_entry, hlist, handle)
+		if (_sa_entry->handle == handle) {
+			rcu_read_unlock();
+			return  -EEXIST;
+		}
+	rcu_read_unlock();
 
 	spin_lock_irqsave(&ipsec->sadb_rx_lock, flags);
-	sa_entry->handle = ret;
+	sa_entry->handle = handle;
 	hash_add_rcu(ipsec->sadb_rx, &sa_entry->hlist, sa_entry->handle);
 	spin_unlock_irqrestore(&ipsec->sadb_rx_lock, flags);
 
@@ -103,15 +108,6 @@ static void mlx5e_ipsec_sadb_rx_del(struct mlx5e_ipsec_sa_entry *sa_entry)
 	spin_unlock_irqrestore(&ipsec->sadb_rx_lock, flags);
 }
 
-static void mlx5e_ipsec_sadb_rx_free(struct mlx5e_ipsec_sa_entry *sa_entry)
-{
-	struct mlx5e_ipsec *ipsec = sa_entry->ipsec;
-
-	/* xfrm already doing sync rcu between del and free callbacks */
-
-	ida_simple_remove(&ipsec->halloc, sa_entry->handle);
-}
-
 static bool mlx5e_ipsec_update_esn_state(struct mlx5e_ipsec_sa_entry *sa_entry)
 {
 	struct xfrm_replay_state_esn *replay_esn;
@@ -199,6 +195,14 @@ mlx5e_ipsec_build_accel_xfrm_attrs(struct mlx5e_ipsec_sa_entry *sa_entry,
 	attrs->flags |= (x->props.mode == XFRM_MODE_TRANSPORT) ?
 			MLX5_ACCEL_ESP_FLAGS_TRANSPORT :
 			MLX5_ACCEL_ESP_FLAGS_TUNNEL;
+
+	/* spi */
+	attrs->spi = x->id.spi;
+
+	/* source , destination ips */
+	memcpy(&attrs->saddr, x->props.saddr.a6, sizeof(attrs->saddr));
+	memcpy(&attrs->daddr, x->id.daddr.a6, sizeof(attrs->daddr));
+	attrs->is_ipv6 = (x->props.family != AF_INET);
 }
 
 static inline int mlx5e_xfrm_validate_state(struct xfrm_state *x)
@@ -284,8 +288,7 @@ static int mlx5e_xfrm_add_state(struct xfrm_state *x)
 	struct net_device *netdev = x->xso.dev;
 	struct mlx5_accel_esp_xfrm_attrs attrs;
 	struct mlx5e_priv *priv;
-	__be32 saddr[4] = {0}, daddr[4] = {0}, spi;
-	bool is_ipv6 = false;
+	unsigned int sa_handle;
 	int err;
 
 	priv = netdev_priv(netdev);
@@ -303,20 +306,6 @@ static int mlx5e_xfrm_add_state(struct xfrm_state *x)
 	sa_entry->x = x;
 	sa_entry->ipsec = priv->ipsec;
 
-	/* Add the SA to handle processed incoming packets before the add SA
-	 * completion was received
-	 */
-	if (x->xso.flags & XFRM_OFFLOAD_INBOUND) {
-		err = mlx5e_ipsec_sadb_rx_add(sa_entry);
-		if (err) {
-			netdev_info(netdev, "Failed adding to SADB_RX: %d\n", err);
-			goto err_entry;
-		}
-	} else {
-		sa_entry->set_iv_op = (x->props.flags & XFRM_STATE_ESN) ?
-				mlx5e_ipsec_set_iv_esn : mlx5e_ipsec_set_iv;
-	}
-
 	/* check esn */
 	mlx5e_ipsec_update_esn_state(sa_entry);
 
@@ -327,41 +316,38 @@ static int mlx5e_xfrm_add_state(struct xfrm_state *x)
 					   MLX5_ACCEL_XFRM_FLAG_REQUIRE_METADATA);
 	if (IS_ERR(sa_entry->xfrm)) {
 		err = PTR_ERR(sa_entry->xfrm);
-		goto err_sadb_rx;
+		goto err_sa_entry;
 	}
 
 	/* create hw context */
-	if (x->props.family == AF_INET) {
-		saddr[3] = x->props.saddr.a4;
-		daddr[3] = x->id.daddr.a4;
-	} else {
-		memcpy(saddr, x->props.saddr.a6, sizeof(saddr));
-		memcpy(daddr, x->id.daddr.a6, sizeof(daddr));
-		is_ipv6 = true;
-	}
-	spi = x->id.spi;
 	sa_entry->hw_context =
 			mlx5_accel_esp_create_hw_context(priv->mdev,
 							 sa_entry->xfrm,
-							 saddr, daddr, spi,
-							 is_ipv6);
+							 &sa_handle);
 	if (IS_ERR(sa_entry->hw_context)) {
 		err = PTR_ERR(sa_entry->hw_context);
 		goto err_xfrm;
 	}
 
+	if (x->xso.flags & XFRM_OFFLOAD_INBOUND) {
+		err = mlx5e_ipsec_sadb_rx_add(sa_entry, sa_handle);
+		if (err)
+			goto err_hw_ctx;
+	} else {
+		sa_entry->set_iv_op = (x->props.flags & XFRM_STATE_ESN) ?
+				mlx5e_ipsec_set_iv_esn : mlx5e_ipsec_set_iv;
+	}
+
 	x->xso.offload_handle = (unsigned long)sa_entry;
 	goto out;
 
+err_hw_ctx:
+	mlx5_accel_esp_free_hw_context(sa_entry->hw_context);
 err_xfrm:
 	mlx5_accel_esp_destroy_xfrm(sa_entry->xfrm);
-err_sadb_rx:
-	if (x->xso.flags & XFRM_OFFLOAD_INBOUND) {
-		mlx5e_ipsec_sadb_rx_del(sa_entry);
-		mlx5e_ipsec_sadb_rx_free(sa_entry);
-	}
-err_entry:
+err_sa_entry:
 	kfree(sa_entry);
+
 out:
 	return err;
 }
@@ -390,9 +376,6 @@ static void mlx5e_xfrm_free_state(struct xfrm_state *x)
 		mlx5_accel_esp_destroy_xfrm(sa_entry->xfrm);
 	}
 
-	if (x->xso.flags & XFRM_OFFLOAD_INBOUND)
-		mlx5e_ipsec_sadb_rx_free(sa_entry);
-
 	kfree(sa_entry);
 }
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h
index 93bf10e6508c..c85151a1e008 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h
@@ -109,11 +109,6 @@ int mlx5e_ipsec_init(struct mlx5e_priv *priv);
 void mlx5e_ipsec_cleanup(struct mlx5e_priv *priv);
 void mlx5e_ipsec_build_netdev(struct mlx5e_priv *priv);
 
-int mlx5e_ipsec_get_count(struct mlx5e_priv *priv);
-int mlx5e_ipsec_get_strings(struct mlx5e_priv *priv, uint8_t *data);
-void mlx5e_ipsec_update_stats(struct mlx5e_priv *priv);
-int mlx5e_ipsec_get_stats(struct mlx5e_priv *priv, u64 *data);
-
 struct xfrm_state *mlx5e_ipsec_sadb_rx_lookup(struct mlx5e_ipsec *dev,
 					      unsigned int handle);
 
@@ -136,26 +131,6 @@ static inline void mlx5e_ipsec_build_netdev(struct mlx5e_priv *priv)
 {
 }
 
-static inline int mlx5e_ipsec_get_count(struct mlx5e_priv *priv)
-{
-	return 0;
-}
-
-static inline int mlx5e_ipsec_get_strings(struct mlx5e_priv *priv,
-					  uint8_t *data)
-{
-	return 0;
-}
-
-static inline void mlx5e_ipsec_update_stats(struct mlx5e_priv *priv)
-{
-}
-
-static inline int mlx5e_ipsec_get_stats(struct mlx5e_priv *priv, u64 *data)
-{
-	return 0;
-}
-
 #endif
 
 #endif	/* __MLX5E_IPSEC_H__ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_stats.c
index 6fea59223dc4..6c5c54bcd9be 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_stats.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_stats.c
@@ -38,6 +38,7 @@
 #include "accel/ipsec.h"
 #include "fpga/sdk.h"
 #include "en_accel/ipsec.h"
+#include "fpga/ipsec.h"
 
 static const struct counter_desc mlx5e_ipsec_hw_stats_desc[] = {
 	{ MLX5E_DECLARE_STAT(struct mlx5e_ipsec_stats, ipsec_dec_in_packets) },
@@ -73,61 +74,74 @@ static const struct counter_desc mlx5e_ipsec_sw_stats_desc[] = {
 #define NUM_IPSEC_HW_COUNTERS ARRAY_SIZE(mlx5e_ipsec_hw_stats_desc)
 #define NUM_IPSEC_SW_COUNTERS ARRAY_SIZE(mlx5e_ipsec_sw_stats_desc)
 
-#define NUM_IPSEC_COUNTERS (NUM_IPSEC_HW_COUNTERS + NUM_IPSEC_SW_COUNTERS)
-
-int mlx5e_ipsec_get_count(struct mlx5e_priv *priv)
+static MLX5E_DECLARE_STATS_GRP_OP_NUM_STATS(ipsec_sw)
 {
-	if (!priv->ipsec)
-		return 0;
-
-	return NUM_IPSEC_COUNTERS;
+	return NUM_IPSEC_SW_COUNTERS;
 }
 
-int mlx5e_ipsec_get_strings(struct mlx5e_priv *priv, uint8_t *data)
-{
-	unsigned int i, idx = 0;
+static inline MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(ipsec_sw) {}
 
-	if (!priv->ipsec)
-		return 0;
+static MLX5E_DECLARE_STATS_GRP_OP_FILL_STRS(ipsec_sw)
+{
+	unsigned int i;
 
-	for (i = 0; i < NUM_IPSEC_HW_COUNTERS; i++)
-		strcpy(data + (idx++) * ETH_GSTRING_LEN,
-		       mlx5e_ipsec_hw_stats_desc[i].format);
+	if (priv->ipsec)
+		for (i = 0; i < NUM_IPSEC_SW_COUNTERS; i++)
+			strcpy(data + (idx++) * ETH_GSTRING_LEN,
+			       mlx5e_ipsec_sw_stats_desc[i].format);
+	return idx;
+}
 
-	for (i = 0; i < NUM_IPSEC_SW_COUNTERS; i++)
-		strcpy(data + (idx++) * ETH_GSTRING_LEN,
-		       mlx5e_ipsec_sw_stats_desc[i].format);
+static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(ipsec_sw)
+{
+	int i;
 
-	return NUM_IPSEC_COUNTERS;
+	if (priv->ipsec)
+		for (i = 0; i < NUM_IPSEC_SW_COUNTERS; i++)
+			data[idx++] = MLX5E_READ_CTR_ATOMIC64(&priv->ipsec->sw_stats,
+							      mlx5e_ipsec_sw_stats_desc, i);
+	return idx;
 }
 
-void mlx5e_ipsec_update_stats(struct mlx5e_priv *priv)
+static MLX5E_DECLARE_STATS_GRP_OP_NUM_STATS(ipsec_hw)
 {
-	int ret;
+	return (mlx5_fpga_ipsec_device_caps(priv->mdev)) ? NUM_IPSEC_HW_COUNTERS : 0;
+}
 
-	if (!priv->ipsec)
-		return;
+static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(ipsec_hw)
+{
+	int ret = 0;
 
-	ret = mlx5_accel_ipsec_counters_read(priv->mdev, (u64 *)&priv->ipsec->stats,
-					     NUM_IPSEC_HW_COUNTERS);
+	if (priv->ipsec)
+		ret = mlx5_accel_ipsec_counters_read(priv->mdev, (u64 *)&priv->ipsec->stats,
+						     NUM_IPSEC_HW_COUNTERS);
 	if (ret)
 		memset(&priv->ipsec->stats, 0, sizeof(priv->ipsec->stats));
 }
 
-int mlx5e_ipsec_get_stats(struct mlx5e_priv *priv, u64 *data)
+static MLX5E_DECLARE_STATS_GRP_OP_FILL_STRS(ipsec_hw)
 {
-	int i, idx = 0;
-
-	if (!priv->ipsec)
-		return 0;
+	unsigned int i;
 
-	for (i = 0; i < NUM_IPSEC_HW_COUNTERS; i++)
-		data[idx++] = MLX5E_READ_CTR64_CPU(&priv->ipsec->stats,
-						   mlx5e_ipsec_hw_stats_desc, i);
+	if (priv->ipsec && mlx5_fpga_ipsec_device_caps(priv->mdev))
+		for (i = 0; i < NUM_IPSEC_HW_COUNTERS; i++)
+			strcpy(data + (idx++) * ETH_GSTRING_LEN,
+			       mlx5e_ipsec_hw_stats_desc[i].format);
 
-	for (i = 0; i < NUM_IPSEC_SW_COUNTERS; i++)
-		data[idx++] = MLX5E_READ_CTR_ATOMIC64(&priv->ipsec->sw_stats,
-						      mlx5e_ipsec_sw_stats_desc, i);
+	return idx;
+}
 
-	return NUM_IPSEC_COUNTERS;
+static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(ipsec_hw)
+{
+	int i;
+
+	if (priv->ipsec && mlx5_fpga_ipsec_device_caps(priv->mdev))
+		for (i = 0; i < NUM_IPSEC_HW_COUNTERS; i++)
+			data[idx++] = MLX5E_READ_CTR64_CPU(&priv->ipsec->stats,
+							   mlx5e_ipsec_hw_stats_desc,
+							   i);
+	return idx;
 }
+
+MLX5E_DEFINE_STATS_GRP(ipsec_sw, 0);
+MLX5E_DEFINE_STATS_GRP(ipsec_hw, 0);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_common.c b/drivers/net/ethernet/mellanox/mlx5/core/en_common.c
index f7890e0ce96c..af3228b3f303 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_common.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_common.c
@@ -36,12 +36,11 @@
  * Global resources are common to all the netdevices crated on the same nic.
  */
 
-int mlx5e_create_tir(struct mlx5_core_dev *mdev,
-		     struct mlx5e_tir *tir, u32 *in, int inlen)
+int mlx5e_create_tir(struct mlx5_core_dev *mdev, struct mlx5e_tir *tir, u32 *in)
 {
 	int err;
 
-	err = mlx5_core_create_tir(mdev, in, inlen, &tir->tirn);
+	err = mlx5_core_create_tir(mdev, in, &tir->tirn);
 	if (err)
 		return err;
 
@@ -167,7 +166,7 @@ int mlx5e_refresh_tirs(struct mlx5e_priv *priv, bool enable_uc_lb)
 	mutex_lock(&mdev->mlx5e_res.td.list_lock);
 	list_for_each_entry(tir, &mdev->mlx5e_res.td.tirs_list, list) {
 		tirn = tir->tirn;
-		err = mlx5_core_modify_tir(mdev, tirn, in, inlen);
+		err = mlx5_core_modify_tir(mdev, tirn, in);
 		if (err)
 			goto out;
 	}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 6d703ddee4e2..0279bb7246e1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -432,7 +432,7 @@ int mlx5e_ethtool_set_channels(struct mlx5e_priv *priv,
 
 	if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) {
 		*cur_params = new_channels.params;
-		mlx5e_num_channels_changed(priv);
+		err = mlx5e_num_channels_changed(priv);
 		goto out;
 	}
 
@@ -1204,7 +1204,7 @@ int mlx5e_set_rxfh(struct net_device *dev, const u32 *indir,
 	}
 
 	if (hash_changed)
-		mlx5e_modify_tirs_hash(priv, in, inlen);
+		mlx5e_modify_tirs_hash(priv, in);
 
 	mutex_unlock(&priv->state_lock);
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
index 3bc2ac3d53fc..83c9b2bbc4af 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
@@ -858,7 +858,7 @@ static int mlx5e_set_rss_hash_opt(struct mlx5e_priv *priv,
 		goto out;
 
 	priv->rss_params.rx_hash_fields[tt] = rx_hash_field;
-	mlx5e_modify_tirs_hash(priv, in, inlen);
+	mlx5e_modify_tirs_hash(priv, in);
 
 out:
 	mutex_unlock(&priv->state_lock);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index b314adf438da..10c933e5da9a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -721,7 +721,7 @@ int mlx5e_modify_rq_state(struct mlx5e_rq *rq, int curr_state, int next_state)
 	MLX5_SET(modify_rq_in, in, rq_state, curr_state);
 	MLX5_SET(rqc, rqc, state, next_state);
 
-	err = mlx5_core_modify_rq(mdev, rq->rqn, in, inlen);
+	err = mlx5_core_modify_rq(mdev, rq->rqn, in);
 
 	kvfree(in);
 
@@ -752,7 +752,7 @@ static int mlx5e_modify_rq_scatter_fcs(struct mlx5e_rq *rq, bool enable)
 	MLX5_SET(rqc, rqc, scatter_fcs, enable);
 	MLX5_SET(rqc, rqc, state, MLX5_RQC_STATE_RDY);
 
-	err = mlx5_core_modify_rq(mdev, rq->rqn, in, inlen);
+	err = mlx5_core_modify_rq(mdev, rq->rqn, in);
 
 	kvfree(in);
 
@@ -781,7 +781,7 @@ static int mlx5e_modify_rq_vsd(struct mlx5e_rq *rq, bool vsd)
 	MLX5_SET(rqc, rqc, vsd, vsd);
 	MLX5_SET(rqc, rqc, state, MLX5_RQC_STATE_RDY);
 
-	err = mlx5_core_modify_rq(mdev, rq->rqn, in, inlen);
+	err = mlx5_core_modify_rq(mdev, rq->rqn, in);
 
 	kvfree(in);
 
@@ -1259,7 +1259,7 @@ int mlx5e_modify_sq(struct mlx5_core_dev *mdev, u32 sqn,
 		MLX5_SET(sqc,  sqc, packet_pacing_rate_limit_index, p->rl_index);
 	}
 
-	err = mlx5_core_modify_sq(mdev, sqn, in, inlen);
+	err = mlx5_core_modify_sq(mdev, sqn, in);
 
 	kvfree(in);
 
@@ -2698,7 +2698,7 @@ static void mlx5e_update_rx_hash_fields(struct mlx5e_tirc_config *ttconfig,
 	ttconfig->rx_hash_fields = rx_hash_fields;
 }
 
-void mlx5e_modify_tirs_hash(struct mlx5e_priv *priv, void *in, int inlen)
+void mlx5e_modify_tirs_hash(struct mlx5e_priv *priv, void *in)
 {
 	void *tirc = MLX5_ADDR_OF(modify_tir_in, in, ctx);
 	struct mlx5e_rss_params *rss = &priv->rss_params;
@@ -2714,7 +2714,7 @@ void mlx5e_modify_tirs_hash(struct mlx5e_priv *priv, void *in, int inlen)
 		mlx5e_update_rx_hash_fields(&ttconfig, tt,
 					    rss->rx_hash_fields[tt]);
 		mlx5e_build_indir_tir_ctx_hash(rss, &ttconfig, tirc, false);
-		mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in, inlen);
+		mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in);
 	}
 
 	if (!mlx5e_tunnel_inner_ft_supported(priv->mdev))
@@ -2725,8 +2725,7 @@ void mlx5e_modify_tirs_hash(struct mlx5e_priv *priv, void *in, int inlen)
 		mlx5e_update_rx_hash_fields(&ttconfig, tt,
 					    rss->rx_hash_fields[tt]);
 		mlx5e_build_indir_tir_ctx_hash(rss, &ttconfig, tirc, true);
-		mlx5_core_modify_tir(mdev, priv->inner_indir_tir[tt].tirn, in,
-				     inlen);
+		mlx5_core_modify_tir(mdev, priv->inner_indir_tir[tt].tirn, in);
 	}
 }
 
@@ -2752,15 +2751,13 @@ static int mlx5e_modify_tirs_lro(struct mlx5e_priv *priv)
 	mlx5e_build_tir_ctx_lro(&priv->channels.params, tirc);
 
 	for (tt = 0; tt < MLX5E_NUM_INDIR_TIRS; tt++) {
-		err = mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in,
-					   inlen);
+		err = mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in);
 		if (err)
 			goto free_in;
 	}
 
 	for (ix = 0; ix < priv->max_nch; ix++) {
-		err = mlx5_core_modify_tir(mdev, priv->direct_tir[ix].tirn,
-					   in, inlen);
+		err = mlx5_core_modify_tir(mdev, priv->direct_tir[ix].tirn, in);
 		if (err)
 			goto free_in;
 	}
@@ -2839,11 +2836,8 @@ void mlx5e_set_netdev_mtu_boundaries(struct mlx5e_priv *priv)
 				ETH_MAX_MTU);
 }
 
-static void mlx5e_netdev_set_tcs(struct net_device *netdev)
+static void mlx5e_netdev_set_tcs(struct net_device *netdev, u16 nch, u8 ntc)
 {
-	struct mlx5e_priv *priv = netdev_priv(netdev);
-	int nch = priv->channels.params.num_channels;
-	int ntc = priv->channels.params.num_tc;
 	int tc;
 
 	netdev_reset_tc(netdev);
@@ -2860,15 +2854,47 @@ static void mlx5e_netdev_set_tcs(struct net_device *netdev)
 		netdev_set_tc_queue(netdev, tc, nch, 0);
 }
 
-static void mlx5e_update_netdev_queues(struct mlx5e_priv *priv, u16 count)
+static int mlx5e_update_netdev_queues(struct mlx5e_priv *priv)
 {
-	int num_txqs = count * priv->channels.params.num_tc;
-	int num_rxqs = count * priv->profile->rq_groups;
 	struct net_device *netdev = priv->netdev;
+	int num_txqs, num_rxqs, nch, ntc;
+	int old_num_txqs, old_ntc;
+	int err;
+
+	old_num_txqs = netdev->real_num_tx_queues;
+	old_ntc = netdev->num_tc;
+
+	nch = priv->channels.params.num_channels;
+	ntc = priv->channels.params.num_tc;
+	num_txqs = nch * ntc;
+	num_rxqs = nch * priv->profile->rq_groups;
 
-	mlx5e_netdev_set_tcs(netdev);
-	netif_set_real_num_tx_queues(netdev, num_txqs);
-	netif_set_real_num_rx_queues(netdev, num_rxqs);
+	mlx5e_netdev_set_tcs(netdev, nch, ntc);
+
+	err = netif_set_real_num_tx_queues(netdev, num_txqs);
+	if (err) {
+		netdev_warn(netdev, "netif_set_real_num_tx_queues failed, %d\n", err);
+		goto err_tcs;
+	}
+	err = netif_set_real_num_rx_queues(netdev, num_rxqs);
+	if (err) {
+		netdev_warn(netdev, "netif_set_real_num_rx_queues failed, %d\n", err);
+		goto err_txqs;
+	}
+
+	return 0;
+
+err_txqs:
+	/* netif_set_real_num_rx_queues could fail only when nch increased. Only
+	 * one of nch and ntc is changed in this function. That means, the call
+	 * to netif_set_real_num_tx_queues below should not fail, because it
+	 * decreases the number of TX queues.
+	 */
+	WARN_ON_ONCE(netif_set_real_num_tx_queues(netdev, old_num_txqs));
+
+err_tcs:
+	mlx5e_netdev_set_tcs(netdev, old_num_txqs / old_ntc, old_ntc);
+	return err;
 }
 
 static void mlx5e_set_default_xps_cpumasks(struct mlx5e_priv *priv,
@@ -2895,8 +2921,12 @@ static void mlx5e_set_default_xps_cpumasks(struct mlx5e_priv *priv,
 int mlx5e_num_channels_changed(struct mlx5e_priv *priv)
 {
 	u16 count = priv->channels.params.num_channels;
+	int err;
+
+	err = mlx5e_update_netdev_queues(priv);
+	if (err)
+		return err;
 
-	mlx5e_update_netdev_queues(priv, count);
 	mlx5e_set_default_xps_cpumasks(priv, &priv->channels.params);
 
 	if (!netif_is_rxfh_configured(priv->netdev))
@@ -3214,7 +3244,7 @@ int mlx5e_create_tis(struct mlx5_core_dev *mdev, void *in, u32 *tisn)
 	if (mlx5_lag_is_lacp_owner(mdev))
 		MLX5_SET(tisc, tisc, strict_lag_tx_port_affinity, 1);
 
-	return mlx5_core_create_tis(mdev, in, MLX5_ST_SZ_BYTES(create_tis_in), tisn);
+	return mlx5_core_create_tis(mdev, in, tisn);
 }
 
 void mlx5e_destroy_tis(struct mlx5_core_dev *mdev, u32 tisn)
@@ -3332,7 +3362,7 @@ int mlx5e_create_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc)
 		tir = &priv->indir_tir[tt];
 		tirc = MLX5_ADDR_OF(create_tir_in, in, ctx);
 		mlx5e_build_indir_tir_ctx(priv, tt, tirc);
-		err = mlx5e_create_tir(priv->mdev, tir, in, inlen);
+		err = mlx5e_create_tir(priv->mdev, tir, in);
 		if (err) {
 			mlx5_core_warn(priv->mdev, "create indirect tirs failed, %d\n", err);
 			goto err_destroy_inner_tirs;
@@ -3347,7 +3377,7 @@ int mlx5e_create_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc)
 		tir = &priv->inner_indir_tir[i];
 		tirc = MLX5_ADDR_OF(create_tir_in, in, ctx);
 		mlx5e_build_inner_indir_tir_ctx(priv, i, tirc);
-		err = mlx5e_create_tir(priv->mdev, tir, in, inlen);
+		err = mlx5e_create_tir(priv->mdev, tir, in);
 		if (err) {
 			mlx5_core_warn(priv->mdev, "create inner indirect tirs failed, %d\n", err);
 			goto err_destroy_inner_tirs;
@@ -3390,7 +3420,7 @@ int mlx5e_create_direct_tirs(struct mlx5e_priv *priv, struct mlx5e_tir *tirs)
 		tir = &tirs[ix];
 		tirc = MLX5_ADDR_OF(create_tir_in, in, ctx);
 		mlx5e_build_direct_tir_ctx(priv, tir->rqt.rqtn, tirc);
-		err = mlx5e_create_tir(priv->mdev, tir, in, inlen);
+		err = mlx5e_create_tir(priv->mdev, tir, in);
 		if (unlikely(err))
 			goto err_destroy_ch_tirs;
 	}
@@ -5002,29 +5032,40 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 
 void mlx5e_create_q_counters(struct mlx5e_priv *priv)
 {
+	u32 out[MLX5_ST_SZ_DW(alloc_q_counter_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(alloc_q_counter_in)] = {};
 	struct mlx5_core_dev *mdev = priv->mdev;
 	int err;
 
-	err = mlx5_core_alloc_q_counter(mdev, &priv->q_counter);
-	if (err) {
-		mlx5_core_warn(mdev, "alloc queue counter failed, %d\n", err);
-		priv->q_counter = 0;
-	}
+	MLX5_SET(alloc_q_counter_in, in, opcode, MLX5_CMD_OP_ALLOC_Q_COUNTER);
+	err = mlx5_cmd_exec_inout(mdev, alloc_q_counter, in, out);
+	if (!err)
+		priv->q_counter =
+			MLX5_GET(alloc_q_counter_out, out, counter_set_id);
 
-	err = mlx5_core_alloc_q_counter(mdev, &priv->drop_rq_q_counter);
-	if (err) {
-		mlx5_core_warn(mdev, "alloc drop RQ counter failed, %d\n", err);
-		priv->drop_rq_q_counter = 0;
-	}
+	err = mlx5_cmd_exec_inout(mdev, alloc_q_counter, in, out);
+	if (!err)
+		priv->drop_rq_q_counter =
+			MLX5_GET(alloc_q_counter_out, out, counter_set_id);
 }
 
 void mlx5e_destroy_q_counters(struct mlx5e_priv *priv)
 {
-	if (priv->q_counter)
-		mlx5_core_dealloc_q_counter(priv->mdev, priv->q_counter);
+	u32 in[MLX5_ST_SZ_DW(dealloc_q_counter_in)] = {};
+
+	MLX5_SET(dealloc_q_counter_in, in, opcode,
+		 MLX5_CMD_OP_DEALLOC_Q_COUNTER);
+	if (priv->q_counter) {
+		MLX5_SET(dealloc_q_counter_in, in, counter_set_id,
+			 priv->q_counter);
+		mlx5_cmd_exec_in(priv->mdev, dealloc_q_counter, in);
+	}
 
-	if (priv->drop_rq_q_counter)
-		mlx5_core_dealloc_q_counter(priv->mdev, priv->drop_rq_q_counter);
+	if (priv->drop_rq_q_counter) {
+		MLX5_SET(dealloc_q_counter_in, in, counter_set_id,
+			 priv->drop_rq_q_counter);
+		mlx5_cmd_exec_in(priv->mdev, dealloc_q_counter, in);
+	}
 }
 
 static int mlx5e_nic_init(struct mlx5_core_dev *mdev,
@@ -5363,9 +5404,11 @@ int mlx5e_attach_netdev(struct mlx5e_priv *priv)
 	 */
 	if (take_rtnl)
 		rtnl_lock();
-	mlx5e_num_channels_changed(priv);
+	err = mlx5e_num_channels_changed(priv);
 	if (take_rtnl)
 		rtnl_unlock();
+	if (err)
+		goto out;
 
 	err = profile->init_tx(priv);
 	if (err)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
index 30b216d9284c..f009fe09e99b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
@@ -32,8 +32,8 @@
 
 #include "lib/mlx5.h"
 #include "en.h"
-#include "en_accel/ipsec.h"
 #include "en_accel/tls.h"
+#include "en_accel/en_accel.h"
 
 static unsigned int stats_grps_num(struct mlx5e_priv *priv)
 {
@@ -411,18 +411,29 @@ static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(qcnt)
 static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(qcnt)
 {
 	struct mlx5e_qcounter_stats *qcnt = &priv->stats.qcnt;
-	u32 out[MLX5_ST_SZ_DW(query_q_counter_out)];
+	u32 out[MLX5_ST_SZ_DW(query_q_counter_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_q_counter_in)] = {};
+	int ret;
+
+	MLX5_SET(query_q_counter_in, in, opcode, MLX5_CMD_OP_QUERY_Q_COUNTER);
+
+	if (priv->q_counter) {
+		MLX5_SET(query_q_counter_in, in, counter_set_id,
+			 priv->q_counter);
+		ret = mlx5_cmd_exec_inout(priv->mdev, query_q_counter, in, out);
+		if (!ret)
+			qcnt->rx_out_of_buffer = MLX5_GET(query_q_counter_out,
+							  out, out_of_buffer);
+	}
 
-	if (priv->q_counter &&
-	    !mlx5_core_query_q_counter(priv->mdev, priv->q_counter, 0, out,
-				       sizeof(out)))
-		qcnt->rx_out_of_buffer = MLX5_GET(query_q_counter_out,
-						  out, out_of_buffer);
-	if (priv->drop_rq_q_counter &&
-	    !mlx5_core_query_q_counter(priv->mdev, priv->drop_rq_q_counter, 0,
-				       out, sizeof(out)))
-		qcnt->rx_if_down_packets = MLX5_GET(query_q_counter_out, out,
-						    out_of_buffer);
+	if (priv->drop_rq_q_counter) {
+		MLX5_SET(query_q_counter_in, in, counter_set_id,
+			 priv->drop_rq_q_counter);
+		ret = mlx5_cmd_exec_inout(priv->mdev, query_q_counter, in, out);
+		if (!ret)
+			qcnt->rx_if_down_packets = MLX5_GET(query_q_counter_out,
+							    out, out_of_buffer);
+	}
 }
 
 #define VNIC_ENV_OFF(c) MLX5_BYTE_OFF(query_vnic_env_out, c)
@@ -480,18 +491,14 @@ static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(vnic_env)
 static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(vnic_env)
 {
 	u32 *out = (u32 *)priv->stats.vnic.query_vnic_env_out;
-	int outlen = MLX5_ST_SZ_BYTES(query_vnic_env_out);
-	u32 in[MLX5_ST_SZ_DW(query_vnic_env_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(query_vnic_env_in)] = {};
 	struct mlx5_core_dev *mdev = priv->mdev;
 
 	if (!MLX5_CAP_GEN(priv->mdev, nic_receive_steering_discard))
 		return;
 
-	MLX5_SET(query_vnic_env_in, in, opcode,
-		 MLX5_CMD_OP_QUERY_VNIC_ENV);
-	MLX5_SET(query_vnic_env_in, in, op_mod, 0);
-	MLX5_SET(query_vnic_env_in, in, other_vport, 0);
-	mlx5_cmd_exec(mdev, in, sizeof(in), out, outlen);
+	MLX5_SET(query_vnic_env_in, in, opcode, MLX5_CMD_OP_QUERY_VNIC_ENV);
+	mlx5_cmd_exec_inout(mdev, query_vnic_env, in, out);
 }
 
 #define VPORT_COUNTER_OFF(c) MLX5_BYTE_OFF(query_vport_counter_out, c)
@@ -566,15 +573,12 @@ static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(vport)
 
 static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(vport)
 {
-	int outlen = MLX5_ST_SZ_BYTES(query_vport_counter_out);
 	u32 *out = (u32 *)priv->stats.vport.query_vport_out;
-	u32 in[MLX5_ST_SZ_DW(query_vport_counter_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(query_vport_counter_in)] = {};
 	struct mlx5_core_dev *mdev = priv->mdev;
 
 	MLX5_SET(query_vport_counter_in, in, opcode, MLX5_CMD_OP_QUERY_VPORT_COUNTER);
-	MLX5_SET(query_vport_counter_in, in, op_mod, 0);
-	MLX5_SET(query_vport_counter_in, in, other_vport, 0);
-	mlx5_cmd_exec(mdev, in, sizeof(in), out, outlen);
+	mlx5_cmd_exec_inout(mdev, query_vport_counter, in, out);
 }
 
 #define PPORT_802_3_OFF(c) \
@@ -1424,27 +1428,6 @@ static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(pme)
 
 static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(pme) { return; }
 
-static MLX5E_DECLARE_STATS_GRP_OP_NUM_STATS(ipsec)
-{
-	return mlx5e_ipsec_get_count(priv);
-}
-
-static MLX5E_DECLARE_STATS_GRP_OP_FILL_STRS(ipsec)
-{
-	return idx + mlx5e_ipsec_get_strings(priv,
-					     data + idx * ETH_GSTRING_LEN);
-}
-
-static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(ipsec)
-{
-	return idx + mlx5e_ipsec_get_stats(priv, data + idx);
-}
-
-static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(ipsec)
-{
-	mlx5e_ipsec_update_stats(priv);
-}
-
 static MLX5E_DECLARE_STATS_GRP_OP_NUM_STATS(tls)
 {
 	return mlx5e_tls_get_count(priv);
@@ -1714,7 +1697,6 @@ MLX5E_DEFINE_STATS_GRP(pme, 0);
 MLX5E_DEFINE_STATS_GRP(channels, 0);
 MLX5E_DEFINE_STATS_GRP(per_port_buff_congest, 0);
 MLX5E_DEFINE_STATS_GRP(eth_ext, 0);
-static MLX5E_DEFINE_STATS_GRP(ipsec, 0);
 static MLX5E_DEFINE_STATS_GRP(tls, 0);
 
 /* The stats groups order is opposite to the update_stats() order calls */
@@ -1731,7 +1713,10 @@ mlx5e_stats_grp_t mlx5e_nic_stats_grps[] = {
 	&MLX5E_STATS_GRP(pcie),
 	&MLX5E_STATS_GRP(per_prio),
 	&MLX5E_STATS_GRP(pme),
-	&MLX5E_STATS_GRP(ipsec),
+#ifdef CONFIG_MLX5_EN_IPSEC
+	&MLX5E_STATS_GRP(ipsec_sw),
+	&MLX5E_STATS_GRP(ipsec_hw),
+#endif
 	&MLX5E_STATS_GRP(tls),
 	&MLX5E_STATS_GRP(channels),
 	&MLX5E_STATS_GRP(per_port_buff_congest),
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
index 092b39ffa32a..2b83ba990714 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
@@ -390,5 +390,7 @@ extern MLX5E_DECLARE_STATS_GRP(per_prio);
 extern MLX5E_DECLARE_STATS_GRP(pme);
 extern MLX5E_DECLARE_STATS_GRP(channels);
 extern MLX5E_DECLARE_STATS_GRP(per_port_buff_congest);
+extern MLX5E_DECLARE_STATS_GRP(ipsec_hw);
+extern MLX5E_DECLARE_STATS_GRP(ipsec_sw);
 
 #endif /* __MLX5_EN_STATS_H__ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index a574c588269a..77397aa66810 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -61,7 +61,7 @@
 #include "lib/geneve.h"
 #include "diag/en_tc_tracepoint.h"
 
-#define MLX5_MH_ACT_SZ MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto)
+#define MLX5_MH_ACT_SZ MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)
 
 struct mlx5_nic_flow_attr {
 	u32 action;
@@ -171,6 +171,11 @@ struct tunnel_match_key {
 	int filter_ifindex;
 };
 
+struct tunnel_match_enc_opts {
+	struct flow_dissector_key_enc_opts key;
+	struct flow_dissector_key_enc_opts mask;
+};
+
 /* Tunnel_id mapping is TUNNEL_INFO_BITS + ENC_OPTS_BITS.
  * Upper TUNNEL_INFO_BITS for general tunnel info.
  * Lower ENC_OPTS_BITS bits for enc_opts.
@@ -568,7 +573,7 @@ struct mlx5_core_dev *mlx5e_hairpin_get_mdev(struct net *net, int ifindex)
 
 static int mlx5e_hairpin_create_transport(struct mlx5e_hairpin *hp)
 {
-	u32 in[MLX5_ST_SZ_DW(create_tir_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(create_tir_in)] = {};
 	void *tirc;
 	int err;
 
@@ -582,7 +587,7 @@ static int mlx5e_hairpin_create_transport(struct mlx5e_hairpin *hp)
 	MLX5_SET(tirc, tirc, inline_rqn, hp->pair->rqn[0]);
 	MLX5_SET(tirc, tirc, transport_domain, hp->tdn);
 
-	err = mlx5_core_create_tir(hp->func_mdev, in, MLX5_ST_SZ_BYTES(create_tir_in), &hp->tirn);
+	err = mlx5_core_create_tir(hp->func_mdev, in, &hp->tirn);
 	if (err)
 		goto create_tir_err;
 
@@ -666,7 +671,7 @@ static int mlx5e_hairpin_create_indirect_tirs(struct mlx5e_hairpin *hp)
 		mlx5e_build_indir_tir_ctx_hash(&priv->rss_params, &ttconfig, tirc, false);
 
 		err = mlx5_core_create_tir(hp->func_mdev, in,
-					   MLX5_ST_SZ_BYTES(create_tir_in), &hp->indir_tirn[tt]);
+					   &hp->indir_tirn[tt]);
 		if (err) {
 			mlx5_core_warn(hp->func_mdev, "create indirect tirs failed, %d\n", err);
 			goto err_destroy_tirs;
@@ -1824,9 +1829,7 @@ enc_opts_is_dont_care_or_full_match(struct mlx5e_priv *priv,
 			*dont_care = false;
 
 			if (opt->opt_class != U16_MAX ||
-			    opt->type != U8_MAX ||
-			    memchr_inv(opt->opt_data, 0xFF,
-				       opt->length * 4)) {
+			    opt->type != U8_MAX) {
 				NL_SET_ERR_MSG(extack,
 					       "Partial match of tunnel options in chain > 0 isn't supported");
 				netdev_warn(priv->netdev,
@@ -1863,6 +1866,7 @@ static int mlx5e_get_flow_tunnel_id(struct mlx5e_priv *priv,
 	struct mlx5_esw_flow_attr *attr = flow->esw_attr;
 	struct mlx5e_tc_mod_hdr_acts *mod_hdr_acts;
 	struct flow_match_enc_opts enc_opts_match;
+	struct tunnel_match_enc_opts tun_enc_opts;
 	struct mlx5_rep_uplink_priv *uplink_priv;
 	struct mlx5e_rep_priv *uplink_rpriv;
 	struct tunnel_match_key tunnel_key;
@@ -1905,8 +1909,14 @@ static int mlx5e_get_flow_tunnel_id(struct mlx5e_priv *priv,
 		goto err_enc_opts;
 
 	if (!enc_opts_is_dont_care) {
+		memset(&tun_enc_opts, 0, sizeof(tun_enc_opts));
+		memcpy(&tun_enc_opts.key, enc_opts_match.key,
+		       sizeof(*enc_opts_match.key));
+		memcpy(&tun_enc_opts.mask, enc_opts_match.mask,
+		       sizeof(*enc_opts_match.mask));
+
 		err = mapping_add(uplink_priv->tunnel_enc_opts_mapping,
-				  enc_opts_match.key, &enc_opts_id);
+				  &tun_enc_opts, &enc_opts_id);
 		if (err)
 			goto err_enc_opts;
 	}
@@ -2661,7 +2671,7 @@ static int offload_pedit_fields(struct mlx5e_priv *priv,
 	set_vals = &hdrs[0].vals;
 	add_vals = &hdrs[1].vals;
 
-	action_size = MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto);
+	action_size = MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto);
 
 	for (i = 0; i < ARRAY_SIZE(fields); i++) {
 		bool skip;
@@ -2794,7 +2804,7 @@ int alloc_mod_hdr_actions(struct mlx5_core_dev *mdev,
 	if (mod_hdr_acts->num_actions < mod_hdr_acts->max_actions)
 		return 0;
 
-	action_size = MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto);
+	action_size = MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto);
 
 	max_hw_actions = mlx5e_flow_namespace_max_modify_action(mdev,
 								namespace);
@@ -4707,7 +4717,7 @@ void mlx5e_tc_nic_cleanup(struct mlx5e_priv *priv)
 
 int mlx5e_tc_esw_init(struct rhashtable *tc_ht)
 {
-	const size_t sz_enc_opts = sizeof(struct flow_dissector_key_enc_opts);
+	const size_t sz_enc_opts = sizeof(struct tunnel_match_enc_opts);
 	struct mlx5_rep_uplink_priv *uplink_priv;
 	struct mlx5e_rep_priv *priv;
 	struct mapping_ctx *mapping;
@@ -4802,7 +4812,7 @@ static bool mlx5e_restore_tunnel(struct mlx5e_priv *priv, struct sk_buff *skb,
 				 u32 tunnel_id)
 {
 	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
-	struct flow_dissector_key_enc_opts enc_opts = {};
+	struct tunnel_match_enc_opts enc_opts = {};
 	struct mlx5_rep_uplink_priv *uplink_priv;
 	struct mlx5e_rep_priv *uplink_rpriv;
 	struct metadata_dst *tun_dst;
@@ -4840,7 +4850,7 @@ static bool mlx5e_restore_tunnel(struct mlx5e_priv *priv, struct sk_buff *skb,
 		}
 	}
 
-	tun_dst = tun_rx_dst(enc_opts.len);
+	tun_dst = tun_rx_dst(enc_opts.key.len);
 	if (!tun_dst) {
 		WARN_ON_ONCE(true);
 		return false;
@@ -4854,9 +4864,11 @@ static bool mlx5e_restore_tunnel(struct mlx5e_priv *priv, struct sk_buff *skb,
 			   key32_to_tunnel_id(key.enc_key_id.keyid),
 			   TUNNEL_KEY);
 
-	if (enc_opts.len)
-		ip_tunnel_info_opts_set(&tun_dst->u.tun_info, enc_opts.data,
-					enc_opts.len, enc_opts.dst_opt_type);
+	if (enc_opts.key.len)
+		ip_tunnel_info_opts_set(&tun_dst->u.tun_info,
+					enc_opts.key.data,
+					enc_opts.key.len,
+					enc_opts.key.dst_opt_type);
 
 	skb_dst_set(skb, (struct dst_entry *)tun_dst);
 	dev = dev_get_by_index(&init_net, key.filter_ifindex);
@@ -4893,7 +4905,7 @@ bool mlx5e_tc_rep_update_skb(struct mlx5_cqe64 *cqe,
 	reg_c0 = (be32_to_cpu(cqe->sop_drop_qpn) & MLX5E_TC_FLOW_ID_MASK);
 	if (reg_c0 == MLX5_FS_DEFAULT_FLOW_TAG)
 		reg_c0 = 0;
-	reg_c1 = be32_to_cpu(cqe->imm_inval_pkey);
+	reg_c1 = be32_to_cpu(cqe->ft_metadata);
 
 	if (!reg_c0)
 		return true;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
index cccea3a8eddd..4d974b5405b5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
@@ -36,7 +36,6 @@
 #include <linux/mlx5/driver.h>
 #include <linux/mlx5/vport.h>
 #include <linux/mlx5/eq.h>
-#include <linux/mlx5/cmd.h>
 #ifdef CONFIG_RFS_ACCEL
 #include <linux/cpu_rmap.h>
 #endif
@@ -102,12 +101,11 @@ struct mlx5_eq_table {
 
 static int mlx5_cmd_destroy_eq(struct mlx5_core_dev *dev, u8 eqn)
 {
-	u32 out[MLX5_ST_SZ_DW(destroy_eq_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(destroy_eq_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_eq_in)] = {};
 
 	MLX5_SET(destroy_eq_in, in, opcode, MLX5_CMD_OP_DESTROY_EQ);
 	MLX5_SET(destroy_eq_in, in, eq_number, eqn);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, destroy_eq, in);
 }
 
 /* caller must eventually call mlx5_cq_put on the returned cq */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/chains.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/chains.c
index 029001040737..d5bf908dfecd 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/chains.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/chains.c
@@ -274,7 +274,7 @@ mlx5_esw_chains_destroy_fdb_table(struct mlx5_eswitch *esw,
 static int
 create_fdb_chain_restore(struct fdb_chain *fdb_chain)
 {
-	char modact[MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto)];
+	char modact[MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)];
 	struct mlx5_eswitch *esw = fdb_chain->esw;
 	struct mlx5_modify_hdr *mod_hdr;
 	u32 index;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 7f618a443bfd..c5eb4e7754a9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -84,8 +84,7 @@ mlx5_eswitch_get_vport(struct mlx5_eswitch *esw, u16 vport_num)
 static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport,
 					u32 events_mask)
 {
-	int in[MLX5_ST_SZ_DW(modify_nic_vport_context_in)]   = {0};
-	int out[MLX5_ST_SZ_DW(modify_nic_vport_context_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(modify_nic_vport_context_in)] = {};
 	void *nic_vport_ctx;
 
 	MLX5_SET(modify_nic_vport_context_in, in,
@@ -108,40 +107,24 @@ static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport,
 		MLX5_SET(nic_vport_context, nic_vport_ctx,
 			 event_on_promisc_change, 1);
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, modify_nic_vport_context, in);
 }
 
 /* E-Switch vport context HW commands */
 int mlx5_eswitch_modify_esw_vport_context(struct mlx5_core_dev *dev, u16 vport,
-					  bool other_vport,
-					  void *in, int inlen)
+					  bool other_vport, void *in)
 {
-	u32 out[MLX5_ST_SZ_DW(modify_esw_vport_context_out)] = {0};
-
 	MLX5_SET(modify_esw_vport_context_in, in, opcode,
 		 MLX5_CMD_OP_MODIFY_ESW_VPORT_CONTEXT);
 	MLX5_SET(modify_esw_vport_context_in, in, vport_number, vport);
 	MLX5_SET(modify_esw_vport_context_in, in, other_vport, other_vport);
-	return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
-}
-
-int mlx5_eswitch_query_esw_vport_context(struct mlx5_core_dev *dev, u16 vport,
-					 bool other_vport,
-					 void *out, int outlen)
-{
-	u32 in[MLX5_ST_SZ_DW(query_esw_vport_context_in)] = {};
-
-	MLX5_SET(query_esw_vport_context_in, in, opcode,
-		 MLX5_CMD_OP_QUERY_ESW_VPORT_CONTEXT);
-	MLX5_SET(modify_esw_vport_context_in, in, vport_number, vport);
-	MLX5_SET(modify_esw_vport_context_in, in, other_vport, other_vport);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
+	return mlx5_cmd_exec_in(dev, modify_esw_vport_context, in);
 }
 
 static int modify_esw_vport_cvlan(struct mlx5_core_dev *dev, u16 vport,
 				  u16 vlan, u8 qos, u8 set_flags)
 {
-	u32 in[MLX5_ST_SZ_DW(modify_esw_vport_context_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(modify_esw_vport_context_in)] = {};
 
 	if (!MLX5_CAP_ESW(dev, vport_cvlan_strip) ||
 	    !MLX5_CAP_ESW(dev, vport_cvlan_insert_if_not_exist))
@@ -170,8 +153,7 @@ static int modify_esw_vport_cvlan(struct mlx5_core_dev *dev, u16 vport,
 	MLX5_SET(modify_esw_vport_context_in, in,
 		 field_select.vport_cvlan_insert, 1);
 
-	return mlx5_eswitch_modify_esw_vport_context(dev, vport, true,
-						     in, sizeof(in));
+	return mlx5_eswitch_modify_esw_vport_context(dev, vport, true, in);
 }
 
 /* E-Switch FDB */
@@ -1901,7 +1883,7 @@ const u32 *mlx5_esw_query_functions(struct mlx5_core_dev *dev)
 	MLX5_SET(query_esw_functions_in, in, opcode,
 		 MLX5_CMD_OP_QUERY_ESW_FUNCTIONS);
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
+	err = mlx5_cmd_exec_inout(dev, query_esw_functions, in, out);
 	if (!err)
 		return out;
 
@@ -2783,8 +2765,8 @@ int mlx5_eswitch_get_vport_stats(struct mlx5_eswitch *esw,
 {
 	struct mlx5_vport *vport = mlx5_eswitch_get_vport(esw, vport_num);
 	int outlen = MLX5_ST_SZ_BYTES(query_vport_counter_out);
-	u32 in[MLX5_ST_SZ_DW(query_vport_counter_in)] = {0};
-	struct mlx5_vport_drop_stats stats = {0};
+	u32 in[MLX5_ST_SZ_DW(query_vport_counter_in)] = {};
+	struct mlx5_vport_drop_stats stats = {};
 	int err = 0;
 	u32 *out;
 
@@ -2801,7 +2783,7 @@ int mlx5_eswitch_get_vport_stats(struct mlx5_eswitch *esw,
 	MLX5_SET(query_vport_counter_in, in, vport_number, vport->vport);
 	MLX5_SET(query_vport_counter_in, in, other_vport, 1);
 
-	err = mlx5_cmd_exec(esw->dev, in, sizeof(in), out, outlen);
+	err = mlx5_cmd_exec_inout(esw->dev, query_vport_counter, in, out);
 	if (err)
 		goto free_out;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
index c1848b57f61c..4a1c6c78bb14 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
@@ -329,11 +329,7 @@ int mlx5_eswitch_get_vport_stats(struct mlx5_eswitch *esw,
 void mlx5_eswitch_del_send_to_vport_rule(struct mlx5_flow_handle *rule);
 
 int mlx5_eswitch_modify_esw_vport_context(struct mlx5_core_dev *dev, u16 vport,
-					  bool other_vport,
-					  void *in, int inlen);
-int mlx5_eswitch_query_esw_vport_context(struct mlx5_core_dev *dev, u16 vport,
-					 bool other_vport,
-					 void *out, int outlen);
+					  bool other_vport, void *in);
 
 struct mlx5_flow_spec;
 struct mlx5_esw_flow_attr;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index b2e38e0cde97..781c1d184b60 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -784,7 +784,8 @@ static bool mlx5_eswitch_reg_c1_loopback_supported(struct mlx5_eswitch *esw)
 static int esw_set_passing_vport_metadata(struct mlx5_eswitch *esw, bool enable)
 {
 	u32 out[MLX5_ST_SZ_DW(query_esw_vport_context_out)] = {};
-	u32 in[MLX5_ST_SZ_DW(modify_esw_vport_context_in)] = {};
+	u32 min[MLX5_ST_SZ_DW(modify_esw_vport_context_in)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_esw_vport_context_in)] = {};
 	u8 curr, wanted;
 	int err;
 
@@ -792,8 +793,9 @@ static int esw_set_passing_vport_metadata(struct mlx5_eswitch *esw, bool enable)
 	    !mlx5_eswitch_vport_match_metadata_enabled(esw))
 		return 0;
 
-	err = mlx5_eswitch_query_esw_vport_context(esw->dev, 0, false,
-						   out, sizeof(out));
+	MLX5_SET(query_esw_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_QUERY_ESW_VPORT_CONTEXT);
+	err = mlx5_cmd_exec_inout(esw->dev, query_esw_vport_context, in, out);
 	if (err)
 		return err;
 
@@ -808,14 +810,12 @@ static int esw_set_passing_vport_metadata(struct mlx5_eswitch *esw, bool enable)
 	else
 		curr &= ~wanted;
 
-	MLX5_SET(modify_esw_vport_context_in, in,
+	MLX5_SET(modify_esw_vport_context_in, min,
 		 esw_vport_context.fdb_to_vport_reg_c_id, curr);
-
-	MLX5_SET(modify_esw_vport_context_in, in,
+	MLX5_SET(modify_esw_vport_context_in, min,
 		 field_select.fdb_to_vport_reg_c_id, 1);
 
-	err = mlx5_eswitch_modify_esw_vport_context(esw->dev, 0, false, in,
-						    sizeof(in));
+	err = mlx5_eswitch_modify_esw_vport_context(esw->dev, 0, false, min);
 	if (!err) {
 		if (enable && (curr & MLX5_FDB_TO_VPORT_REG_C_1))
 			esw->flags |= MLX5_ESWITCH_REG_C1_LOOPBACK_ENABLED;
@@ -1468,7 +1468,7 @@ static int mlx5_eswitch_inline_mode_get(const struct mlx5_eswitch *esw, u8 *mode
 out:
 	*mode = mlx5_mode;
 	return 0;
-}       
+}
 
 static void esw_destroy_restore_table(struct mlx5_eswitch *esw)
 {
@@ -1484,7 +1484,7 @@ static void esw_destroy_restore_table(struct mlx5_eswitch *esw)
 
 static int esw_create_restore_table(struct mlx5_eswitch *esw)
 {
-	u8 modact[MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto)] = {};
+	u8 modact[MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)] = {};
 	int inlen = MLX5_ST_SZ_BYTES(create_flow_group_in);
 	struct mlx5_flow_table_attr ft_attr = {};
 	struct mlx5_core_dev *dev = esw->dev;
@@ -1894,7 +1894,7 @@ static int esw_vport_ingress_prio_tag_config(struct mlx5_eswitch *esw,
 static int esw_vport_add_ingress_acl_modify_metadata(struct mlx5_eswitch *esw,
 						     struct mlx5_vport *vport)
 {
-	u8 action[MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto)] = {};
+	u8 action[MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)] = {};
 	struct mlx5_flow_act flow_act = {};
 	int err = 0;
 	u32 key;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/cmd.c
index c0fd2212e890..9a37077152aa 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/cmd.c
@@ -31,7 +31,6 @@
  */
 
 #include <linux/etherdevice.h>
-#include <linux/mlx5/cmd.h>
 #include <linux/mlx5/driver.h>
 #include <linux/mlx5/device.h>
 
@@ -143,15 +142,15 @@ int mlx5_fpga_query(struct mlx5_core_dev *dev, struct mlx5_fpga_query *query)
 int mlx5_fpga_create_qp(struct mlx5_core_dev *dev, void *fpga_qpc,
 			u32 *fpga_qpn)
 {
-	u32 in[MLX5_ST_SZ_DW(fpga_create_qp_in)] = {0};
-	u32 out[MLX5_ST_SZ_DW(fpga_create_qp_out)];
+	u32 out[MLX5_ST_SZ_DW(fpga_create_qp_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(fpga_create_qp_in)] = {};
 	int ret;
 
 	MLX5_SET(fpga_create_qp_in, in, opcode, MLX5_CMD_OP_FPGA_CREATE_QP);
 	memcpy(MLX5_ADDR_OF(fpga_create_qp_in, in, fpga_qpc), fpga_qpc,
 	       MLX5_FLD_SZ_BYTES(fpga_create_qp_in, fpga_qpc));
 
-	ret = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	ret = mlx5_cmd_exec_inout(dev, fpga_create_qp, in, out);
 	if (ret)
 		return ret;
 
@@ -165,8 +164,7 @@ int mlx5_fpga_modify_qp(struct mlx5_core_dev *dev, u32 fpga_qpn,
 			enum mlx5_fpga_qpc_field_select fields,
 			void *fpga_qpc)
 {
-	u32 in[MLX5_ST_SZ_DW(fpga_modify_qp_in)] = {0};
-	u32 out[MLX5_ST_SZ_DW(fpga_modify_qp_out)];
+	u32 in[MLX5_ST_SZ_DW(fpga_modify_qp_in)] = {};
 
 	MLX5_SET(fpga_modify_qp_in, in, opcode, MLX5_CMD_OP_FPGA_MODIFY_QP);
 	MLX5_SET(fpga_modify_qp_in, in, field_select, fields);
@@ -174,20 +172,20 @@ int mlx5_fpga_modify_qp(struct mlx5_core_dev *dev, u32 fpga_qpn,
 	memcpy(MLX5_ADDR_OF(fpga_modify_qp_in, in, fpga_qpc), fpga_qpc,
 	       MLX5_FLD_SZ_BYTES(fpga_modify_qp_in, fpga_qpc));
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, fpga_modify_qp, in);
 }
 
 int mlx5_fpga_query_qp(struct mlx5_core_dev *dev,
 		       u32 fpga_qpn, void *fpga_qpc)
 {
-	u32 in[MLX5_ST_SZ_DW(fpga_query_qp_in)] = {0};
-	u32 out[MLX5_ST_SZ_DW(fpga_query_qp_out)];
+	u32 out[MLX5_ST_SZ_DW(fpga_query_qp_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(fpga_query_qp_in)] = {};
 	int ret;
 
 	MLX5_SET(fpga_query_qp_in, in, opcode, MLX5_CMD_OP_FPGA_QUERY_QP);
 	MLX5_SET(fpga_query_qp_in, in, fpga_qpn, fpga_qpn);
 
-	ret = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	ret = mlx5_cmd_exec_inout(dev, fpga_query_qp, in, out);
 	if (ret)
 		return ret;
 
@@ -198,20 +196,19 @@ int mlx5_fpga_query_qp(struct mlx5_core_dev *dev,
 
 int mlx5_fpga_destroy_qp(struct mlx5_core_dev *dev, u32 fpga_qpn)
 {
-	u32 in[MLX5_ST_SZ_DW(fpga_destroy_qp_in)] = {0};
-	u32 out[MLX5_ST_SZ_DW(fpga_destroy_qp_out)];
+	u32 in[MLX5_ST_SZ_DW(fpga_destroy_qp_in)] = {};
 
 	MLX5_SET(fpga_destroy_qp_in, in, opcode, MLX5_CMD_OP_FPGA_DESTROY_QP);
 	MLX5_SET(fpga_destroy_qp_in, in, fpga_qpn, fpga_qpn);
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, fpga_destroy_qp, in);
 }
 
 int mlx5_fpga_query_qp_counters(struct mlx5_core_dev *dev, u32 fpga_qpn,
 				bool clear, struct mlx5_fpga_qp_counters *data)
 {
-	u32 in[MLX5_ST_SZ_DW(fpga_query_qp_counters_in)] = {0};
-	u32 out[MLX5_ST_SZ_DW(fpga_query_qp_counters_out)];
+	u32 out[MLX5_ST_SZ_DW(fpga_query_qp_counters_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(fpga_query_qp_counters_in)] = {};
 	int ret;
 
 	MLX5_SET(fpga_query_qp_counters_in, in, opcode,
@@ -219,7 +216,7 @@ int mlx5_fpga_query_qp_counters(struct mlx5_core_dev *dev, u32 fpga_qpn,
 	MLX5_SET(fpga_query_qp_counters_in, in, clear, clear);
 	MLX5_SET(fpga_query_qp_counters_in, in, fpga_qpn, fpga_qpn);
 
-	ret = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	ret = mlx5_cmd_exec_inout(dev, fpga_query_qp_counters, in, out);
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
index 61021133029e..182d3ac3e73f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
@@ -165,7 +165,7 @@ static void mlx5_fpga_conn_post_send(struct mlx5_fpga_conn *conn,
 	ctrl->fm_ce_se = MLX5_WQE_CTRL_CQ_UPDATE;
 	ctrl->opmod_idx_opcode = cpu_to_be32(((conn->qp.sq.pc & 0xffff) << 8) |
 					     MLX5_OPCODE_SEND);
-	ctrl->qpn_ds = cpu_to_be32(size | (conn->qp.mqp.qpn << 8));
+	ctrl->qpn_ds = cpu_to_be32(size | (conn->qp.qpn << 8));
 
 	conn->qp.sq.pc++;
 	conn->qp.sq.bufs[ix] = buf;
@@ -362,23 +362,6 @@ static void mlx5_fpga_conn_arm_cq(struct mlx5_fpga_conn *conn)
 		    conn->fdev->conn_res.uar->map, conn->cq.wq.cc);
 }
 
-static void mlx5_fpga_conn_cq_event(struct mlx5_core_cq *mcq,
-				    enum mlx5_event event)
-{
-	struct mlx5_fpga_conn *conn;
-
-	conn = container_of(mcq, struct mlx5_fpga_conn, cq.mcq);
-	mlx5_fpga_warn(conn->fdev, "CQ event %u on CQ #%u\n", event, mcq->cqn);
-}
-
-static void mlx5_fpga_conn_event(struct mlx5_core_qp *mqp, int event)
-{
-	struct mlx5_fpga_conn *conn;
-
-	conn = container_of(mqp, struct mlx5_fpga_conn, qp.mqp);
-	mlx5_fpga_warn(conn->fdev, "QP event %u on QP #%u\n", event, mqp->qpn);
-}
-
 static inline void mlx5_fpga_conn_cqes(struct mlx5_fpga_conn *conn,
 				       unsigned int budget)
 {
@@ -493,7 +476,6 @@ static int mlx5_fpga_conn_create_cq(struct mlx5_fpga_conn *conn, int cq_size)
 	*conn->cq.mcq.arm_db    = 0;
 	conn->cq.mcq.vector     = 0;
 	conn->cq.mcq.comp       = mlx5_fpga_conn_cq_complete;
-	conn->cq.mcq.event      = mlx5_fpga_conn_cq_event;
 	conn->cq.mcq.irqn       = irqn;
 	conn->cq.mcq.uar        = fdev->conn_res.uar;
 	tasklet_init(&conn->cq.tasklet, mlx5_fpga_conn_cq_tasklet,
@@ -534,8 +516,9 @@ static int mlx5_fpga_conn_create_qp(struct mlx5_fpga_conn *conn,
 				    unsigned int tx_size, unsigned int rx_size)
 {
 	struct mlx5_fpga_device *fdev = conn->fdev;
+	u32 out[MLX5_ST_SZ_DW(create_qp_out)] = {};
 	struct mlx5_core_dev *mdev = fdev->mdev;
-	u32 temp_qpc[MLX5_ST_SZ_DW(qpc)] = {0};
+	u32 temp_qpc[MLX5_ST_SZ_DW(qpc)] = {};
 	void *in = NULL, *qpc;
 	int err, inlen;
 
@@ -600,12 +583,13 @@ static int mlx5_fpga_conn_create_qp(struct mlx5_fpga_conn *conn,
 	mlx5_fill_page_frag_array(&conn->qp.wq_ctrl.buf,
 				  (__be64 *)MLX5_ADDR_OF(create_qp_in, in, pas));
 
-	err = mlx5_core_create_qp(mdev, &conn->qp.mqp, in, inlen);
+	MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP);
+	err = mlx5_cmd_exec(mdev, in, inlen, out, sizeof(out));
 	if (err)
 		goto err_sq_bufs;
 
-	conn->qp.mqp.event = mlx5_fpga_conn_event;
-	mlx5_fpga_dbg(fdev, "Created QP #0x%x\n", conn->qp.mqp.qpn);
+	conn->qp.qpn = MLX5_GET(create_qp_out, out, qpn);
+	mlx5_fpga_dbg(fdev, "Created QP #0x%x\n", conn->qp.qpn);
 
 	goto out;
 
@@ -658,7 +642,13 @@ static void mlx5_fpga_conn_flush_send_bufs(struct mlx5_fpga_conn *conn)
 
 static void mlx5_fpga_conn_destroy_qp(struct mlx5_fpga_conn *conn)
 {
-	mlx5_core_destroy_qp(conn->fdev->mdev, &conn->qp.mqp);
+	struct mlx5_core_dev *dev = conn->fdev->mdev;
+	u32 in[MLX5_ST_SZ_DW(destroy_qp_in)] = {};
+
+	MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP);
+	MLX5_SET(destroy_qp_in, in, qpn, conn->qp.qpn);
+	mlx5_cmd_exec_in(dev, destroy_qp, in);
+
 	mlx5_fpga_conn_free_recv_bufs(conn);
 	mlx5_fpga_conn_flush_send_bufs(conn);
 	kvfree(conn->qp.sq.bufs);
@@ -666,30 +656,29 @@ static void mlx5_fpga_conn_destroy_qp(struct mlx5_fpga_conn *conn)
 	mlx5_wq_destroy(&conn->qp.wq_ctrl);
 }
 
-static inline int mlx5_fpga_conn_reset_qp(struct mlx5_fpga_conn *conn)
+static int mlx5_fpga_conn_reset_qp(struct mlx5_fpga_conn *conn)
 {
 	struct mlx5_core_dev *mdev = conn->fdev->mdev;
+	u32 in[MLX5_ST_SZ_DW(qp_2rst_in)] = {};
+
+	mlx5_fpga_dbg(conn->fdev, "Modifying QP %u to RST\n", conn->qp.qpn);
 
-	mlx5_fpga_dbg(conn->fdev, "Modifying QP %u to RST\n", conn->qp.mqp.qpn);
+	MLX5_SET(qp_2rst_in, in, opcode, MLX5_CMD_OP_2RST_QP);
+	MLX5_SET(qp_2rst_in, in, qpn, conn->qp.qpn);
 
-	return mlx5_core_qp_modify(mdev, MLX5_CMD_OP_2RST_QP, 0, NULL,
-				   &conn->qp.mqp);
+	return mlx5_cmd_exec_in(mdev, qp_2rst, in);
 }
 
-static inline int mlx5_fpga_conn_init_qp(struct mlx5_fpga_conn *conn)
+static int mlx5_fpga_conn_init_qp(struct mlx5_fpga_conn *conn)
 {
+	u32 in[MLX5_ST_SZ_DW(rst2init_qp_in)] = {};
 	struct mlx5_fpga_device *fdev = conn->fdev;
 	struct mlx5_core_dev *mdev = fdev->mdev;
-	u32 *qpc = NULL;
-	int err;
+	u32 *qpc;
 
-	mlx5_fpga_dbg(conn->fdev, "Modifying QP %u to INIT\n", conn->qp.mqp.qpn);
+	mlx5_fpga_dbg(conn->fdev, "Modifying QP %u to INIT\n", conn->qp.qpn);
 
-	qpc = kzalloc(MLX5_ST_SZ_BYTES(qpc), GFP_KERNEL);
-	if (!qpc) {
-		err = -ENOMEM;
-		goto out;
-	}
+	qpc = MLX5_ADDR_OF(rst2init_qp_in, in, qpc);
 
 	MLX5_SET(qpc, qpc, st, MLX5_QP_ST_RC);
 	MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
@@ -700,32 +689,22 @@ static inline int mlx5_fpga_conn_init_qp(struct mlx5_fpga_conn *conn)
 	MLX5_SET(qpc, qpc, cqn_rcv, conn->cq.mcq.cqn);
 	MLX5_SET64(qpc, qpc, dbr_addr, conn->qp.wq_ctrl.db.dma);
 
-	err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RST2INIT_QP, 0, qpc,
-				  &conn->qp.mqp);
-	if (err) {
-		mlx5_fpga_warn(fdev, "qp_modify RST2INIT failed: %d\n", err);
-		goto out;
-	}
+	MLX5_SET(rst2init_qp_in, in, opcode, MLX5_CMD_OP_RST2INIT_QP);
+	MLX5_SET(rst2init_qp_in, in, qpn, conn->qp.qpn);
 
-out:
-	kfree(qpc);
-	return err;
+	return mlx5_cmd_exec_in(mdev, rst2init_qp, in);
 }
 
-static inline int mlx5_fpga_conn_rtr_qp(struct mlx5_fpga_conn *conn)
+static int mlx5_fpga_conn_rtr_qp(struct mlx5_fpga_conn *conn)
 {
+	u32 in[MLX5_ST_SZ_DW(init2rtr_qp_in)] = {};
 	struct mlx5_fpga_device *fdev = conn->fdev;
 	struct mlx5_core_dev *mdev = fdev->mdev;
-	u32 *qpc = NULL;
-	int err;
+	u32 *qpc;
 
 	mlx5_fpga_dbg(conn->fdev, "QP RTR\n");
 
-	qpc = kzalloc(MLX5_ST_SZ_BYTES(qpc), GFP_KERNEL);
-	if (!qpc) {
-		err = -ENOMEM;
-		goto out;
-	}
+	qpc = MLX5_ADDR_OF(init2rtr_qp_in, in, qpc);
 
 	MLX5_SET(qpc, qpc, mtu, MLX5_QPC_MTU_1K_BYTES);
 	MLX5_SET(qpc, qpc, log_msg_max, (u8)MLX5_CAP_GEN(mdev, log_max_msg));
@@ -745,33 +724,22 @@ static inline int mlx5_fpga_conn_rtr_qp(struct mlx5_fpga_conn *conn)
 	       MLX5_ADDR_OF(fpga_qpc, conn->fpga_qpc, fpga_ip),
 	       MLX5_FLD_SZ_BYTES(qpc, primary_address_path.rgid_rip));
 
-	err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_INIT2RTR_QP, 0, qpc,
-				  &conn->qp.mqp);
-	if (err) {
-		mlx5_fpga_warn(fdev, "qp_modify RST2INIT failed: %d\n", err);
-		goto out;
-	}
+	MLX5_SET(init2rtr_qp_in, in, opcode, MLX5_CMD_OP_INIT2RTR_QP);
+	MLX5_SET(init2rtr_qp_in, in, qpn, conn->qp.qpn);
 
-out:
-	kfree(qpc);
-	return err;
+	return mlx5_cmd_exec_in(mdev, init2rtr_qp, in);
 }
 
-static inline int mlx5_fpga_conn_rts_qp(struct mlx5_fpga_conn *conn)
+static int mlx5_fpga_conn_rts_qp(struct mlx5_fpga_conn *conn)
 {
 	struct mlx5_fpga_device *fdev = conn->fdev;
+	u32 in[MLX5_ST_SZ_DW(rtr2rts_qp_in)] = {};
 	struct mlx5_core_dev *mdev = fdev->mdev;
-	u32 *qpc = NULL;
-	u32 opt_mask;
-	int err;
+	u32 *qpc;
 
 	mlx5_fpga_dbg(conn->fdev, "QP RTS\n");
 
-	qpc = kzalloc(MLX5_ST_SZ_BYTES(qpc), GFP_KERNEL);
-	if (!qpc) {
-		err = -ENOMEM;
-		goto out;
-	}
+	qpc = MLX5_ADDR_OF(rtr2rts_qp_in, in, qpc);
 
 	MLX5_SET(qpc, qpc, log_ack_req_freq, 8);
 	MLX5_SET(qpc, qpc, min_rnr_nak, 0x12);
@@ -781,17 +749,11 @@ static inline int mlx5_fpga_conn_rts_qp(struct mlx5_fpga_conn *conn)
 	MLX5_SET(qpc, qpc, retry_count, 7);
 	MLX5_SET(qpc, qpc, rnr_retry, 7); /* Infinite retry if RNR NACK */
 
-	opt_mask = MLX5_QP_OPTPAR_RNR_TIMEOUT;
-	err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RTR2RTS_QP, opt_mask, qpc,
-				  &conn->qp.mqp);
-	if (err) {
-		mlx5_fpga_warn(fdev, "qp_modify RST2INIT failed: %d\n", err);
-		goto out;
-	}
+	MLX5_SET(rtr2rts_qp_in, in, opcode, MLX5_CMD_OP_RTR2RTS_QP);
+	MLX5_SET(rtr2rts_qp_in, in, qpn, conn->qp.qpn);
+	MLX5_SET(rtr2rts_qp_in, in, opt_param_mask, MLX5_QP_OPTPAR_RNR_TIMEOUT);
 
-out:
-	kfree(qpc);
-	return err;
+	return mlx5_cmd_exec_in(mdev, rtr2rts_qp, in);
 }
 
 static int mlx5_fpga_conn_connect(struct mlx5_fpga_conn *conn)
@@ -931,7 +893,7 @@ struct mlx5_fpga_conn *mlx5_fpga_conn_create(struct mlx5_fpga_device *fdev,
 	MLX5_SET(fpga_qpc, conn->fpga_qpc, next_rcv_psn, 1);
 	MLX5_SET(fpga_qpc, conn->fpga_qpc, next_send_psn, 0);
 	MLX5_SET(fpga_qpc, conn->fpga_qpc, pkey, MLX5_FPGA_PKEY);
-	MLX5_SET(fpga_qpc, conn->fpga_qpc, remote_qpn, conn->qp.mqp.qpn);
+	MLX5_SET(fpga_qpc, conn->fpga_qpc, remote_qpn, conn->qp.qpn);
 	MLX5_SET(fpga_qpc, conn->fpga_qpc, rnr_retry, 7);
 	MLX5_SET(fpga_qpc, conn->fpga_qpc, retry_count, 7);
 
@@ -972,19 +934,11 @@ struct mlx5_fpga_conn *mlx5_fpga_conn_create(struct mlx5_fpga_device *fdev,
 
 void mlx5_fpga_conn_destroy(struct mlx5_fpga_conn *conn)
 {
-	struct mlx5_fpga_device *fdev = conn->fdev;
-	struct mlx5_core_dev *mdev = fdev->mdev;
-	int err = 0;
-
 	conn->qp.active = false;
 	tasklet_disable(&conn->cq.tasklet);
 	synchronize_irq(conn->cq.mcq.irqn);
 
 	mlx5_fpga_destroy_qp(conn->fdev->mdev, conn->fpga_qpn);
-	err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_2ERR_QP, 0, NULL,
-				  &conn->qp.mqp);
-	if (err)
-		mlx5_fpga_warn(fdev, "qp_modify 2ERR failed: %d\n", err);
 	mlx5_fpga_conn_destroy_qp(conn);
 	mlx5_fpga_conn_destroy_cq(conn);
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.h b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.h
index 634ae10e287b..5116e869a6e4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.h
@@ -65,7 +65,7 @@ struct mlx5_fpga_conn {
 		int sgid_index;
 		struct mlx5_wq_qp wq;
 		struct mlx5_wq_ctrl wq_ctrl;
-		struct mlx5_core_qp mqp;
+		u32 qpn;
 		struct {
 			spinlock_t lock; /* Protects all SQ state */
 			unsigned int pc;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c
index b794888fa3ba..0604216eb94f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c
@@ -65,6 +65,7 @@ struct mlx5_fpga_esp_xfrm;
 struct mlx5_fpga_ipsec_sa_ctx {
 	struct rhash_head		hash;
 	struct mlx5_ifc_fpga_ipsec_sa	hw_sa;
+	u32				sa_handle;
 	struct mlx5_core_dev		*dev;
 	struct mlx5_fpga_esp_xfrm	*fpga_xfrm;
 };
@@ -119,6 +120,8 @@ struct mlx5_fpga_ipsec {
 	 */
 	struct rb_root rules_rb;
 	struct mutex rules_rb_lock; /* rules lock */
+
+	struct ida halloc;
 };
 
 static bool mlx5_fpga_is_ipsec_device(struct mlx5_core_dev *mdev)
@@ -602,7 +605,7 @@ static bool mlx5_is_fpga_ipsec_rule(struct mlx5_core_dev *dev,
 				    const u32 *match_c,
 				    const u32 *match_v)
 {
-	u32 ipsec_dev_caps = mlx5_accel_ipsec_device_caps(dev);
+	u32 ipsec_dev_caps = mlx5_fpga_ipsec_device_caps(dev);
 	bool ipv6_flow;
 
 	ipv6_flow = mlx5_fs_is_outer_ipv6_flow(dev, match_c, match_v);
@@ -666,7 +669,8 @@ void *mlx5_fpga_ipsec_create_sa_ctx(struct mlx5_core_dev *mdev,
 				    struct mlx5_accel_esp_xfrm *accel_xfrm,
 				    const __be32 saddr[4],
 				    const __be32 daddr[4],
-				    const __be32 spi, bool is_ipv6)
+				    const __be32 spi, bool is_ipv6,
+				    u32 *sa_handle)
 {
 	struct mlx5_fpga_ipsec_sa_ctx *sa_ctx;
 	struct mlx5_fpga_esp_xfrm *fpga_xfrm =
@@ -704,6 +708,17 @@ void *mlx5_fpga_ipsec_create_sa_ctx(struct mlx5_core_dev *mdev,
 		goto exists;
 	}
 
+	if (accel_xfrm->attrs.action & MLX5_ACCEL_ESP_ACTION_DECRYPT) {
+		err = ida_simple_get(&fipsec->halloc, 1, 0, GFP_KERNEL);
+		if (err < 0) {
+			context = ERR_PTR(err);
+			goto exists;
+		}
+
+		sa_ctx->sa_handle = err;
+		if (sa_handle)
+			*sa_handle = sa_ctx->sa_handle;
+	}
 	/* This is unbounded fpga_xfrm, try to add to hash */
 	mutex_lock(&fipsec->sa_hash_lock);
 
@@ -744,7 +759,8 @@ void *mlx5_fpga_ipsec_create_sa_ctx(struct mlx5_core_dev *mdev,
 				       rhash_sa));
 unlock_hash:
 	mutex_unlock(&fipsec->sa_hash_lock);
-
+	if (accel_xfrm->attrs.action & MLX5_ACCEL_ESP_ACTION_DECRYPT)
+		ida_simple_remove(&fipsec->halloc, sa_ctx->sa_handle);
 exists:
 	mutex_unlock(&fpga_xfrm->lock);
 	kfree(sa_ctx);
@@ -816,7 +832,7 @@ mlx5_fpga_ipsec_fs_create_sa_ctx(struct mlx5_core_dev *mdev,
 	/* create */
 	return mlx5_fpga_ipsec_create_sa_ctx(mdev, accel_xfrm,
 					     saddr, daddr,
-					     spi, is_ipv6);
+					     spi, is_ipv6, NULL);
 }
 
 static void
@@ -836,6 +852,10 @@ mlx5_fpga_ipsec_release_sa_ctx(struct mlx5_fpga_ipsec_sa_ctx *sa_ctx)
 		return;
 	}
 
+	if (sa_ctx->fpga_xfrm->accel_xfrm.attrs.action &
+	    MLX5_ACCEL_ESP_ACTION_DECRYPT)
+		ida_simple_remove(&fipsec->halloc, sa_ctx->sa_handle);
+
 	mutex_lock(&fipsec->sa_hash_lock);
 	WARN_ON(rhashtable_remove_fast(&fipsec->sa_hash, &sa_ctx->hash,
 				       rhash_sa));
@@ -1299,6 +1319,8 @@ int mlx5_fpga_ipsec_init(struct mlx5_core_dev *mdev)
 		goto err_destroy_hash;
 	}
 
+	ida_init(&fdev->ipsec->halloc);
+
 	return 0;
 
 err_destroy_hash:
@@ -1331,6 +1353,7 @@ void mlx5_fpga_ipsec_cleanup(struct mlx5_core_dev *mdev)
 	if (!mlx5_fpga_is_ipsec_device(mdev))
 		return;
 
+	ida_destroy(&fdev->ipsec->halloc);
 	destroy_rules_rb(&fdev->ipsec->rules_rb);
 	rhashtable_destroy(&fdev->ipsec->sa_hash);
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.h b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.h
index 382985e65b48..9ba637f0f0f2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.h
@@ -37,6 +37,7 @@
 #include "accel/ipsec.h"
 #include "fs_cmd.h"
 
+#ifdef CONFIG_MLX5_FPGA_IPSEC
 u32 mlx5_fpga_ipsec_device_caps(struct mlx5_core_dev *mdev);
 unsigned int mlx5_fpga_ipsec_counters_count(struct mlx5_core_dev *mdev);
 int mlx5_fpga_ipsec_counters_read(struct mlx5_core_dev *mdev, u64 *counters,
@@ -46,7 +47,8 @@ void *mlx5_fpga_ipsec_create_sa_ctx(struct mlx5_core_dev *mdev,
 				    struct mlx5_accel_esp_xfrm *accel_xfrm,
 				    const __be32 saddr[4],
 				    const __be32 daddr[4],
-				    const __be32 spi, bool is_ipv6);
+				    const __be32 spi, bool is_ipv6,
+				    u32 *sa_handle);
 void mlx5_fpga_ipsec_delete_sa_ctx(void *context);
 
 int mlx5_fpga_ipsec_init(struct mlx5_core_dev *mdev);
@@ -63,5 +65,17 @@ int mlx5_fpga_esp_modify_xfrm(struct mlx5_accel_esp_xfrm *xfrm,
 
 const struct mlx5_flow_cmds *
 mlx5_fs_cmd_get_default_ipsec_fpga_cmds(enum fs_flow_table_type type);
+#else
+static inline u32 mlx5_fpga_ipsec_device_caps(struct mlx5_core_dev *mdev)
+{
+	return 0;
+}
 
-#endif	/* __MLX5_FPGA_SADB_H__ */
+static inline const struct mlx5_flow_cmds *
+mlx5_fs_cmd_get_default_ipsec_fpga_cmds(enum fs_flow_table_type type)
+{
+	return mlx5_fs_cmd_get_default(type);
+}
+
+#endif /* CONFIG_MLX5_FPGA_IPSEC */
+#endif	/* __MLX5_FPGA_IPSEC_H__ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c
index 90048697b2ff..1a8e826ac86b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c
@@ -155,8 +155,7 @@ static int mlx5_cmd_update_root_ft(struct mlx5_flow_root_namespace *ns,
 				   struct mlx5_flow_table *ft, u32 underlay_qpn,
 				   bool disconnect)
 {
-	u32 in[MLX5_ST_SZ_DW(set_flow_table_root_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(set_flow_table_root_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(set_flow_table_root_in)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 
 	if ((MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_IB) &&
@@ -167,13 +166,10 @@ static int mlx5_cmd_update_root_ft(struct mlx5_flow_root_namespace *ns,
 		 MLX5_CMD_OP_SET_FLOW_TABLE_ROOT);
 	MLX5_SET(set_flow_table_root_in, in, table_type, ft->type);
 
-	if (disconnect) {
+	if (disconnect)
 		MLX5_SET(set_flow_table_root_in, in, op_mod, 1);
-		MLX5_SET(set_flow_table_root_in, in, table_id, 0);
-	} else {
-		MLX5_SET(set_flow_table_root_in, in, op_mod, 0);
+	else
 		MLX5_SET(set_flow_table_root_in, in, table_id, ft->id);
-	}
 
 	MLX5_SET(set_flow_table_root_in, in, underlay_qpn, underlay_qpn);
 	if (ft->vport) {
@@ -181,7 +177,7 @@ static int mlx5_cmd_update_root_ft(struct mlx5_flow_root_namespace *ns,
 		MLX5_SET(set_flow_table_root_in, in, other_vport, 1);
 	}
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, set_flow_table_root, in);
 }
 
 static int mlx5_cmd_create_flow_table(struct mlx5_flow_root_namespace *ns,
@@ -192,8 +188,8 @@ static int mlx5_cmd_create_flow_table(struct mlx5_flow_root_namespace *ns,
 	int en_encap = !!(ft->flags & MLX5_FLOW_TABLE_TUNNEL_EN_REFORMAT);
 	int en_decap = !!(ft->flags & MLX5_FLOW_TABLE_TUNNEL_EN_DECAP);
 	int term = !!(ft->flags & MLX5_FLOW_TABLE_TERMINATION);
-	u32 out[MLX5_ST_SZ_DW(create_flow_table_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(create_flow_table_in)]   = {0};
+	u32 out[MLX5_ST_SZ_DW(create_flow_table_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(create_flow_table_in)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 	int err;
 
@@ -239,7 +235,7 @@ static int mlx5_cmd_create_flow_table(struct mlx5_flow_root_namespace *ns,
 		break;
 	}
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, create_flow_table, in, out);
 	if (!err)
 		ft->id = MLX5_GET(create_flow_table_out, out,
 				  table_id);
@@ -249,8 +245,7 @@ static int mlx5_cmd_create_flow_table(struct mlx5_flow_root_namespace *ns,
 static int mlx5_cmd_destroy_flow_table(struct mlx5_flow_root_namespace *ns,
 				       struct mlx5_flow_table *ft)
 {
-	u32 in[MLX5_ST_SZ_DW(destroy_flow_table_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(destroy_flow_table_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_flow_table_in)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 
 	MLX5_SET(destroy_flow_table_in, in, opcode,
@@ -262,15 +257,14 @@ static int mlx5_cmd_destroy_flow_table(struct mlx5_flow_root_namespace *ns,
 		MLX5_SET(destroy_flow_table_in, in, other_vport, 1);
 	}
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, destroy_flow_table, in);
 }
 
 static int mlx5_cmd_modify_flow_table(struct mlx5_flow_root_namespace *ns,
 				      struct mlx5_flow_table *ft,
 				      struct mlx5_flow_table *next_ft)
 {
-	u32 in[MLX5_ST_SZ_DW(modify_flow_table_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(modify_flow_table_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(modify_flow_table_in)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 
 	MLX5_SET(modify_flow_table_in, in, opcode,
@@ -310,7 +304,7 @@ static int mlx5_cmd_modify_flow_table(struct mlx5_flow_root_namespace *ns,
 		}
 	}
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, modify_flow_table, in);
 }
 
 static int mlx5_cmd_create_flow_group(struct mlx5_flow_root_namespace *ns,
@@ -318,8 +312,7 @@ static int mlx5_cmd_create_flow_group(struct mlx5_flow_root_namespace *ns,
 				      u32 *in,
 				      struct mlx5_flow_group *fg)
 {
-	u32 out[MLX5_ST_SZ_DW(create_flow_group_out)] = {0};
-	int inlen = MLX5_ST_SZ_BYTES(create_flow_group_in);
+	u32 out[MLX5_ST_SZ_DW(create_flow_group_out)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 	int err;
 
@@ -332,7 +325,7 @@ static int mlx5_cmd_create_flow_group(struct mlx5_flow_root_namespace *ns,
 		MLX5_SET(create_flow_group_in, in, other_vport, 1);
 	}
 
-	err = mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, create_flow_group, in, out);
 	if (!err)
 		fg->id = MLX5_GET(create_flow_group_out, out,
 				  group_id);
@@ -343,8 +336,7 @@ static int mlx5_cmd_destroy_flow_group(struct mlx5_flow_root_namespace *ns,
 				       struct mlx5_flow_table *ft,
 				       struct mlx5_flow_group *fg)
 {
-	u32 out[MLX5_ST_SZ_DW(destroy_flow_group_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(destroy_flow_group_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_flow_group_in)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 
 	MLX5_SET(destroy_flow_group_in, in, opcode,
@@ -357,7 +349,7 @@ static int mlx5_cmd_destroy_flow_group(struct mlx5_flow_root_namespace *ns,
 		MLX5_SET(destroy_flow_group_in, in, other_vport, 1);
 	}
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, destroy_flow_group, in);
 }
 
 static int mlx5_set_extended_dest(struct mlx5_core_dev *dev,
@@ -600,8 +592,7 @@ static int mlx5_cmd_delete_fte(struct mlx5_flow_root_namespace *ns,
 			       struct mlx5_flow_table *ft,
 			       struct fs_fte *fte)
 {
-	u32 out[MLX5_ST_SZ_DW(delete_fte_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(delete_fte_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(delete_fte_in)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 
 	MLX5_SET(delete_fte_in, in, opcode, MLX5_CMD_OP_DELETE_FLOW_TABLE_ENTRY);
@@ -613,22 +604,22 @@ static int mlx5_cmd_delete_fte(struct mlx5_flow_root_namespace *ns,
 		MLX5_SET(delete_fte_in, in, other_vport, 1);
 	}
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, delete_fte, in);
 }
 
 int mlx5_cmd_fc_bulk_alloc(struct mlx5_core_dev *dev,
 			   enum mlx5_fc_bulk_alloc_bitmask alloc_bitmask,
 			   u32 *id)
 {
-	u32 in[MLX5_ST_SZ_DW(alloc_flow_counter_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(alloc_flow_counter_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(alloc_flow_counter_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(alloc_flow_counter_in)] = {};
 	int err;
 
 	MLX5_SET(alloc_flow_counter_in, in, opcode,
 		 MLX5_CMD_OP_ALLOC_FLOW_COUNTER);
 	MLX5_SET(alloc_flow_counter_in, in, flow_counter_bulk, alloc_bitmask);
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, alloc_flow_counter, in, out);
 	if (!err)
 		*id = MLX5_GET(alloc_flow_counter_out, out, flow_counter_id);
 	return err;
@@ -641,21 +632,20 @@ int mlx5_cmd_fc_alloc(struct mlx5_core_dev *dev, u32 *id)
 
 int mlx5_cmd_fc_free(struct mlx5_core_dev *dev, u32 id)
 {
-	u32 in[MLX5_ST_SZ_DW(dealloc_flow_counter_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(dealloc_flow_counter_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(dealloc_flow_counter_in)] = {};
 
 	MLX5_SET(dealloc_flow_counter_in, in, opcode,
 		 MLX5_CMD_OP_DEALLOC_FLOW_COUNTER);
 	MLX5_SET(dealloc_flow_counter_in, in, flow_counter_id, id);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, dealloc_flow_counter, in);
 }
 
 int mlx5_cmd_fc_query(struct mlx5_core_dev *dev, u32 id,
 		      u64 *packets, u64 *bytes)
 {
 	u32 out[MLX5_ST_SZ_BYTES(query_flow_counter_out) +
-		MLX5_ST_SZ_BYTES(traffic_counter)]   = {0};
-	u32 in[MLX5_ST_SZ_DW(query_flow_counter_in)] = {0};
+		MLX5_ST_SZ_BYTES(traffic_counter)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_flow_counter_in)] = {};
 	void *stats;
 	int err = 0;
 
@@ -683,11 +673,10 @@ int mlx5_cmd_fc_bulk_query(struct mlx5_core_dev *dev, u32 base_id, int bulk_len,
 			   u32 *out)
 {
 	int outlen = mlx5_cmd_fc_get_bulk_query_out_len(bulk_len);
-	u32 in[MLX5_ST_SZ_DW(query_flow_counter_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(query_flow_counter_in)] = {};
 
 	MLX5_SET(query_flow_counter_in, in, opcode,
 		 MLX5_CMD_OP_QUERY_FLOW_COUNTER);
-	MLX5_SET(query_flow_counter_in, in, op_mod, 0);
 	MLX5_SET(query_flow_counter_in, in, flow_counter_id, base_id);
 	MLX5_SET(query_flow_counter_in, in, num_of_counters, bulk_len);
 	return mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
@@ -700,7 +689,7 @@ static int mlx5_cmd_packet_reformat_alloc(struct mlx5_flow_root_namespace *ns,
 					  enum mlx5_flow_namespace_type namespace,
 					  struct mlx5_pkt_reformat *pkt_reformat)
 {
-	u32 out[MLX5_ST_SZ_DW(alloc_packet_reformat_context_out)];
+	u32 out[MLX5_ST_SZ_DW(alloc_packet_reformat_context_out)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 	void *packet_reformat_context_in;
 	int max_encap_size;
@@ -732,7 +721,6 @@ static int mlx5_cmd_packet_reformat_alloc(struct mlx5_flow_root_namespace *ns,
 				reformat_data);
 	inlen = reformat - (void *)in  + size;
 
-	memset(in, 0, inlen);
 	MLX5_SET(alloc_packet_reformat_context_in, in, opcode,
 		 MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT);
 	MLX5_SET(packet_reformat_context_in, packet_reformat_context_in,
@@ -741,7 +729,6 @@ static int mlx5_cmd_packet_reformat_alloc(struct mlx5_flow_root_namespace *ns,
 		 reformat_type, reformat_type);
 	memcpy(reformat, reformat_data, size);
 
-	memset(out, 0, sizeof(out));
 	err = mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
 
 	pkt_reformat->id = MLX5_GET(alloc_packet_reformat_context_out,
@@ -753,17 +740,15 @@ static int mlx5_cmd_packet_reformat_alloc(struct mlx5_flow_root_namespace *ns,
 static void mlx5_cmd_packet_reformat_dealloc(struct mlx5_flow_root_namespace *ns,
 					     struct mlx5_pkt_reformat *pkt_reformat)
 {
-	u32 in[MLX5_ST_SZ_DW(dealloc_packet_reformat_context_in)];
-	u32 out[MLX5_ST_SZ_DW(dealloc_packet_reformat_context_out)];
+	u32 in[MLX5_ST_SZ_DW(dealloc_packet_reformat_context_in)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 
-	memset(in, 0, sizeof(in));
 	MLX5_SET(dealloc_packet_reformat_context_in, in, opcode,
 		 MLX5_CMD_OP_DEALLOC_PACKET_REFORMAT_CONTEXT);
 	MLX5_SET(dealloc_packet_reformat_context_in, in, packet_reformat_id,
 		 pkt_reformat->id);
 
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(dev, dealloc_packet_reformat_context, in);
 }
 
 static int mlx5_cmd_modify_header_alloc(struct mlx5_flow_root_namespace *ns,
@@ -771,7 +756,7 @@ static int mlx5_cmd_modify_header_alloc(struct mlx5_flow_root_namespace *ns,
 					void *modify_actions,
 					struct mlx5_modify_hdr *modify_hdr)
 {
-	u32 out[MLX5_ST_SZ_DW(alloc_modify_header_context_out)];
+	u32 out[MLX5_ST_SZ_DW(alloc_modify_header_context_out)] = {};
 	int max_actions, actions_size, inlen, err;
 	struct mlx5_core_dev *dev = ns->dev;
 	void *actions_in;
@@ -806,7 +791,7 @@ static int mlx5_cmd_modify_header_alloc(struct mlx5_flow_root_namespace *ns,
 		return -EOPNOTSUPP;
 	}
 
-	actions_size = MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto) * num_actions;
+	actions_size = MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto) * num_actions;
 	inlen = MLX5_ST_SZ_BYTES(alloc_modify_header_context_in) + actions_size;
 
 	in = kzalloc(inlen, GFP_KERNEL);
@@ -821,7 +806,6 @@ static int mlx5_cmd_modify_header_alloc(struct mlx5_flow_root_namespace *ns,
 	actions_in = MLX5_ADDR_OF(alloc_modify_header_context_in, in, actions);
 	memcpy(actions_in, modify_actions, actions_size);
 
-	memset(out, 0, sizeof(out));
 	err = mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
 
 	modify_hdr->id = MLX5_GET(alloc_modify_header_context_out, out, modify_header_id);
@@ -832,17 +816,15 @@ static int mlx5_cmd_modify_header_alloc(struct mlx5_flow_root_namespace *ns,
 static void mlx5_cmd_modify_header_dealloc(struct mlx5_flow_root_namespace *ns,
 					   struct mlx5_modify_hdr *modify_hdr)
 {
-	u32 in[MLX5_ST_SZ_DW(dealloc_modify_header_context_in)];
-	u32 out[MLX5_ST_SZ_DW(dealloc_modify_header_context_out)];
+	u32 in[MLX5_ST_SZ_DW(dealloc_modify_header_context_in)] = {};
 	struct mlx5_core_dev *dev = ns->dev;
 
-	memset(in, 0, sizeof(in));
 	MLX5_SET(dealloc_modify_header_context_in, in, opcode,
 		 MLX5_CMD_OP_DEALLOC_MODIFY_HEADER_CONTEXT);
 	MLX5_SET(dealloc_modify_header_context_in, in, modify_header_id,
 		 modify_hdr->id);
 
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(dev, dealloc_modify_header_context, in);
 }
 
 static const struct mlx5_flow_cmds mlx5_flow_cmds = {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
index d5defe09339a..2da45e9b9b6d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -2359,7 +2359,7 @@ static struct mlx5_flow_root_namespace
 	struct mlx5_flow_root_namespace *root_ns;
 	struct mlx5_flow_namespace *ns;
 
-	if (mlx5_accel_ipsec_device_caps(steering->dev) & MLX5_ACCEL_IPSEC_CAP_DEVICE &&
+	if (mlx5_fpga_ipsec_device_caps(steering->dev) & MLX5_ACCEL_IPSEC_CAP_DEVICE &&
 	    (table_type == FS_FT_NIC_RX || table_type == FS_FT_NIC_TX))
 		cmds = mlx5_fs_cmd_get_default_ipsec_fpga_cmds(table_type);
 
@@ -2943,7 +2943,8 @@ int mlx5_init_fs(struct mlx5_core_dev *dev)
 			goto err;
 	}
 
-	if (MLX5_IPSEC_DEV(dev) || MLX5_CAP_FLOWTABLE_NIC_TX(dev, ft_support)) {
+	if (mlx5_fpga_ipsec_device_caps(steering->dev) & MLX5_ACCEL_IPSEC_CAP_DEVICE ||
+	    MLX5_CAP_FLOWTABLE_NIC_TX(dev, ft_support)) {
 		err = init_egress_root_ns(steering);
 		if (err)
 			goto err;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
index 90e3d0233101..a5fbe7343508 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
@@ -31,7 +31,6 @@
  */
 
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include <linux/mlx5/eswitch.h>
 #include <linux/module.h>
 #include "mlx5_core.h"
@@ -68,26 +67,19 @@ enum {
 	MCQI_FW_STORED_VERSION  = 1,
 };
 
-static int mlx5_cmd_query_adapter(struct mlx5_core_dev *dev, u32 *out,
-				  int outlen)
-{
-	u32 in[MLX5_ST_SZ_DW(query_adapter_in)] = {0};
-
-	MLX5_SET(query_adapter_in, in, opcode, MLX5_CMD_OP_QUERY_ADAPTER);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
-}
-
 int mlx5_query_board_id(struct mlx5_core_dev *dev)
 {
 	u32 *out;
 	int outlen = MLX5_ST_SZ_BYTES(query_adapter_out);
+	u32 in[MLX5_ST_SZ_DW(query_adapter_in)] = {};
 	int err;
 
 	out = kzalloc(outlen, GFP_KERNEL);
 	if (!out)
 		return -ENOMEM;
 
-	err = mlx5_cmd_query_adapter(dev, out, outlen);
+	MLX5_SET(query_adapter_in, in, opcode, MLX5_CMD_OP_QUERY_ADAPTER);
+	err = mlx5_cmd_exec_inout(dev, query_adapter, in, out);
 	if (err)
 		goto out;
 
@@ -106,13 +98,15 @@ int mlx5_core_query_vendor_id(struct mlx5_core_dev *mdev, u32 *vendor_id)
 {
 	u32 *out;
 	int outlen = MLX5_ST_SZ_BYTES(query_adapter_out);
+	u32 in[MLX5_ST_SZ_DW(query_adapter_in)] = {};
 	int err;
 
 	out = kzalloc(outlen, GFP_KERNEL);
 	if (!out)
 		return -ENOMEM;
 
-	err = mlx5_cmd_query_adapter(mdev, out, outlen);
+	MLX5_SET(query_adapter_in, in, opcode, MLX5_CMD_OP_QUERY_ADAPTER);
+	err = mlx5_cmd_exec_inout(mdev, query_adapter, in, out);
 	if (err)
 		goto out;
 
@@ -260,8 +254,7 @@ int mlx5_query_hca_caps(struct mlx5_core_dev *dev)
 
 int mlx5_cmd_init_hca(struct mlx5_core_dev *dev, uint32_t *sw_owner_id)
 {
-	u32 out[MLX5_ST_SZ_DW(init_hca_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(init_hca_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(init_hca_in)] = {};
 	int i;
 
 	MLX5_SET(init_hca_in, in, opcode, MLX5_CMD_OP_INIT_HCA);
@@ -272,16 +265,15 @@ int mlx5_cmd_init_hca(struct mlx5_core_dev *dev, uint32_t *sw_owner_id)
 				       sw_owner_id[i]);
 	}
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, init_hca, in);
 }
 
 int mlx5_cmd_teardown_hca(struct mlx5_core_dev *dev)
 {
-	u32 out[MLX5_ST_SZ_DW(teardown_hca_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(teardown_hca_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(teardown_hca_in)] = {};
 
 	MLX5_SET(teardown_hca_in, in, opcode, MLX5_CMD_OP_TEARDOWN_HCA);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, teardown_hca, in);
 }
 
 int mlx5_cmd_force_teardown_hca(struct mlx5_core_dev *dev)
@@ -316,8 +308,8 @@ int mlx5_cmd_force_teardown_hca(struct mlx5_core_dev *dev)
 int mlx5_cmd_fast_teardown_hca(struct mlx5_core_dev *dev)
 {
 	unsigned long end, delay_ms = MLX5_FAST_TEARDOWN_WAIT_MS;
-	u32 out[MLX5_ST_SZ_DW(teardown_hca_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(teardown_hca_in)] = {0};
+	u32 out[MLX5_ST_SZ_DW(teardown_hca_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(teardown_hca_in)] = {};
 	int state;
 	int ret;
 
@@ -330,7 +322,7 @@ int mlx5_cmd_fast_teardown_hca(struct mlx5_core_dev *dev)
 	MLX5_SET(teardown_hca_in, in, profile,
 		 MLX5_TEARDOWN_HCA_IN_PROFILE_PREPARE_FAST_TEARDOWN);
 
-	ret = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	ret = mlx5_cmd_exec_inout(dev, teardown_hca, in, out);
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c
index f99e1752d4e5..c0cfbab15fe9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/health.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c
@@ -36,7 +36,6 @@
 #include <linux/vmalloc.h>
 #include <linux/hardirq.h>
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include "mlx5_core.h"
 #include "lib/eq.h"
 #include "lib/mlx5.h"
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
index 673aaa815f57..068578be00f1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
@@ -160,45 +160,54 @@ int mlx5i_init_underlay_qp(struct mlx5e_priv *priv)
 {
 	struct mlx5_core_dev *mdev = priv->mdev;
 	struct mlx5i_priv *ipriv = priv->ppriv;
-	struct mlx5_core_qp *qp = &ipriv->qp;
-	struct mlx5_qp_context *context;
 	int ret;
 
-	/* QP states */
-	context = kzalloc(sizeof(*context), GFP_KERNEL);
-	if (!context)
-		return -ENOMEM;
+	{
+		u32 in[MLX5_ST_SZ_DW(rst2init_qp_in)] = {};
+		u32 *qpc;
 
-	context->flags = cpu_to_be32(MLX5_QP_PM_MIGRATED << 11);
-	context->pri_path.port = 1;
-	context->pri_path.pkey_index = cpu_to_be16(ipriv->pkey_index);
-	context->qkey = cpu_to_be32(IB_DEFAULT_Q_KEY);
+		qpc = MLX5_ADDR_OF(rst2init_qp_in, in, qpc);
 
-	ret = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RST2INIT_QP, 0, context, qp);
-	if (ret) {
-		mlx5_core_err(mdev, "Failed to modify qp RST2INIT, err: %d\n", ret);
-		goto err_qp_modify_to_err;
-	}
-	memset(context, 0, sizeof(*context));
+		MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
+		MLX5_SET(qpc, qpc, primary_address_path.pkey_index,
+			 ipriv->pkey_index);
+		MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
+		MLX5_SET(qpc, qpc, q_key, IB_DEFAULT_Q_KEY);
 
-	ret = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_INIT2RTR_QP, 0, context, qp);
-	if (ret) {
-		mlx5_core_err(mdev, "Failed to modify qp INIT2RTR, err: %d\n", ret);
-		goto err_qp_modify_to_err;
+		MLX5_SET(rst2init_qp_in, in, opcode, MLX5_CMD_OP_RST2INIT_QP);
+		MLX5_SET(rst2init_qp_in, in, qpn, ipriv->qpn);
+		ret = mlx5_cmd_exec_in(mdev, rst2init_qp, in);
+		if (ret)
+			goto err_qp_modify_to_err;
 	}
-
-	ret = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RTR2RTS_QP, 0, context, qp);
-	if (ret) {
-		mlx5_core_err(mdev, "Failed to modify qp RTR2RTS, err: %d\n", ret);
-		goto err_qp_modify_to_err;
+	{
+		u32 in[MLX5_ST_SZ_DW(init2rtr_qp_in)] = {};
+
+		MLX5_SET(init2rtr_qp_in, in, opcode, MLX5_CMD_OP_INIT2RTR_QP);
+		MLX5_SET(init2rtr_qp_in, in, qpn, ipriv->qpn);
+		ret = mlx5_cmd_exec_in(mdev, init2rtr_qp, in);
+		if (ret)
+			goto err_qp_modify_to_err;
+	}
+	{
+		u32 in[MLX5_ST_SZ_DW(rtr2rts_qp_in)] = {};
+
+		MLX5_SET(rtr2rts_qp_in, in, opcode, MLX5_CMD_OP_RTR2RTS_QP);
+		MLX5_SET(rtr2rts_qp_in, in, qpn, ipriv->qpn);
+		ret = mlx5_cmd_exec_in(mdev, rtr2rts_qp, in);
+		if (ret)
+			goto err_qp_modify_to_err;
 	}
-
-	kfree(context);
 	return 0;
 
 err_qp_modify_to_err:
-	mlx5_core_qp_modify(mdev, MLX5_CMD_OP_2ERR_QP, 0, &context, qp);
-	kfree(context);
+	{
+		u32 in[MLX5_ST_SZ_DW(qp_2err_in)] = {};
+
+		MLX5_SET(qp_2err_in, in, opcode, MLX5_CMD_OP_2ERR_QP);
+		MLX5_SET(qp_2err_in, in, qpn, ipriv->qpn);
+		mlx5_cmd_exec_in(mdev, qp_2err, in);
+	}
 	return ret;
 }
 
@@ -206,30 +215,24 @@ void mlx5i_uninit_underlay_qp(struct mlx5e_priv *priv)
 {
 	struct mlx5i_priv *ipriv = priv->ppriv;
 	struct mlx5_core_dev *mdev = priv->mdev;
-	struct mlx5_qp_context context;
-	int err;
+	u32 in[MLX5_ST_SZ_DW(qp_2rst_in)] = {};
 
-	err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_2RST_QP, 0, &context,
-				  &ipriv->qp);
-	if (err)
-		mlx5_core_err(mdev, "Failed to modify qp 2RST, err: %d\n", err);
+	MLX5_SET(qp_2rst_in, in, opcode, MLX5_CMD_OP_2RST_QP);
+	MLX5_SET(qp_2rst_in, in, qpn, ipriv->qpn);
+	mlx5_cmd_exec_in(mdev, qp_2rst, in);
 }
 
 #define MLX5_QP_ENHANCED_ULP_STATELESS_MODE 2
 
-int mlx5i_create_underlay_qp(struct mlx5_core_dev *mdev, struct mlx5_core_qp *qp)
+int mlx5i_create_underlay_qp(struct mlx5e_priv *priv)
 {
-	u32 *in = NULL;
+	u32 out[MLX5_ST_SZ_DW(create_qp_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(create_qp_in)] = {};
+	struct mlx5i_priv *ipriv = priv->ppriv;
 	void *addr_path;
 	int ret = 0;
-	int inlen;
 	void *qpc;
 
-	inlen = MLX5_ST_SZ_BYTES(create_qp_in);
-	in = kvzalloc(inlen, GFP_KERNEL);
-	if (!in)
-		return -ENOMEM;
-
 	qpc = MLX5_ADDR_OF(create_qp_in, in, qpc);
 	MLX5_SET(qpc, qpc, st, MLX5_QP_ST_UD);
 	MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
@@ -240,20 +243,23 @@ int mlx5i_create_underlay_qp(struct mlx5_core_dev *mdev, struct mlx5_core_qp *qp
 	MLX5_SET(ads, addr_path, vhca_port_num, 1);
 	MLX5_SET(ads, addr_path, grh, 1);
 
-	ret = mlx5_core_create_qp(mdev, qp, in, inlen);
-	if (ret) {
-		mlx5_core_err(mdev, "Failed creating IPoIB QP err : %d\n", ret);
-		goto out;
-	}
+	MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP);
+	ret = mlx5_cmd_exec_inout(priv->mdev, create_qp, in, out);
+	if (ret)
+		return ret;
 
-out:
-	kvfree(in);
-	return ret;
+	ipriv->qpn = MLX5_GET(create_qp_out, out, qpn);
+
+	return 0;
 }
 
-void mlx5i_destroy_underlay_qp(struct mlx5_core_dev *mdev, struct mlx5_core_qp *qp)
+void mlx5i_destroy_underlay_qp(struct mlx5_core_dev *mdev, u32 qpn)
 {
-	mlx5_core_destroy_qp(mdev, qp);
+	u32 in[MLX5_ST_SZ_DW(destroy_qp_in)] = {};
+
+	MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP);
+	MLX5_SET(destroy_qp_in, in, qpn, qpn);
+	mlx5_cmd_exec_in(mdev, destroy_qp, in);
 }
 
 int mlx5i_create_tis(struct mlx5_core_dev *mdev, u32 underlay_qpn, u32 *tisn)
@@ -273,13 +279,13 @@ static int mlx5i_init_tx(struct mlx5e_priv *priv)
 	struct mlx5i_priv *ipriv = priv->ppriv;
 	int err;
 
-	err = mlx5i_create_underlay_qp(priv->mdev, &ipriv->qp);
+	err = mlx5i_create_underlay_qp(priv);
 	if (err) {
 		mlx5_core_warn(priv->mdev, "create underlay QP failed, %d\n", err);
 		return err;
 	}
 
-	err = mlx5i_create_tis(priv->mdev, ipriv->qp.qpn, &priv->tisn[0][0]);
+	err = mlx5i_create_tis(priv->mdev, ipriv->qpn, &priv->tisn[0][0]);
 	if (err) {
 		mlx5_core_warn(priv->mdev, "create tis failed, %d\n", err);
 		goto err_destroy_underlay_qp;
@@ -288,7 +294,7 @@ static int mlx5i_init_tx(struct mlx5e_priv *priv)
 	return 0;
 
 err_destroy_underlay_qp:
-	mlx5i_destroy_underlay_qp(priv->mdev, &ipriv->qp);
+	mlx5i_destroy_underlay_qp(priv->mdev, ipriv->qpn);
 	return err;
 }
 
@@ -297,7 +303,7 @@ static void mlx5i_cleanup_tx(struct mlx5e_priv *priv)
 	struct mlx5i_priv *ipriv = priv->ppriv;
 
 	mlx5e_destroy_tis(priv->mdev, priv->tisn[0][0]);
-	mlx5i_destroy_underlay_qp(priv->mdev, &ipriv->qp);
+	mlx5i_destroy_underlay_qp(priv->mdev, ipriv->qpn);
 }
 
 static int mlx5i_create_flow_steering(struct mlx5e_priv *priv)
@@ -500,12 +506,12 @@ int mlx5i_dev_init(struct net_device *dev)
 	struct mlx5i_priv    *ipriv  = priv->ppriv;
 
 	/* Set dev address using underlay QP */
-	dev->dev_addr[1] = (ipriv->qp.qpn >> 16) & 0xff;
-	dev->dev_addr[2] = (ipriv->qp.qpn >>  8) & 0xff;
-	dev->dev_addr[3] = (ipriv->qp.qpn) & 0xff;
+	dev->dev_addr[1] = (ipriv->qpn >> 16) & 0xff;
+	dev->dev_addr[2] = (ipriv->qpn >>  8) & 0xff;
+	dev->dev_addr[3] = (ipriv->qpn) & 0xff;
 
 	/* Add QPN to net-device mapping to HT */
-	mlx5i_pkey_add_qpn(dev ,ipriv->qp.qpn);
+	mlx5i_pkey_add_qpn(dev, ipriv->qpn);
 
 	return 0;
 }
@@ -532,7 +538,7 @@ void mlx5i_dev_cleanup(struct net_device *dev)
 	mlx5i_uninit_underlay_qp(priv);
 
 	/* Delete QPN to net-device mapping from HT */
-	mlx5i_pkey_del_qpn(dev, ipriv->qp.qpn);
+	mlx5i_pkey_del_qpn(dev, ipriv->qpn);
 }
 
 static int mlx5i_open(struct net_device *netdev)
@@ -552,7 +558,7 @@ static int mlx5i_open(struct net_device *netdev)
 		goto err_clear_state_opened_flag;
 	}
 
-	err = mlx5_fs_add_rx_underlay_qpn(mdev, ipriv->qp.qpn);
+	err = mlx5_fs_add_rx_underlay_qpn(mdev, ipriv->qpn);
 	if (err) {
 		mlx5_core_warn(mdev, "attach underlay qp to ft failed, %d\n", err);
 		goto err_reset_qp;
@@ -569,7 +575,7 @@ static int mlx5i_open(struct net_device *netdev)
 	return 0;
 
 err_remove_fs_underlay_qp:
-	mlx5_fs_remove_rx_underlay_qpn(mdev, ipriv->qp.qpn);
+	mlx5_fs_remove_rx_underlay_qpn(mdev, ipriv->qpn);
 err_reset_qp:
 	mlx5i_uninit_underlay_qp(epriv);
 err_clear_state_opened_flag:
@@ -595,7 +601,7 @@ static int mlx5i_close(struct net_device *netdev)
 	clear_bit(MLX5E_STATE_OPENED, &epriv->state);
 
 	netif_carrier_off(epriv->netdev);
-	mlx5_fs_remove_rx_underlay_qpn(mdev, ipriv->qp.qpn);
+	mlx5_fs_remove_rx_underlay_qpn(mdev, ipriv->qpn);
 	mlx5e_deactivate_priv_channels(epriv);
 	mlx5e_close_channels(&epriv->channels);
 	mlx5i_uninit_underlay_qp(epriv);
@@ -614,11 +620,12 @@ static int mlx5i_attach_mcast(struct net_device *netdev, struct ib_device *hca,
 	struct mlx5i_priv    *ipriv = epriv->ppriv;
 	int err;
 
-	mlx5_core_dbg(mdev, "attaching QPN 0x%x, MGID %pI6\n", ipriv->qp.qpn, gid->raw);
-	err = mlx5_core_attach_mcg(mdev, gid, ipriv->qp.qpn);
+	mlx5_core_dbg(mdev, "attaching QPN 0x%x, MGID %pI6\n", ipriv->qpn,
+		      gid->raw);
+	err = mlx5_core_attach_mcg(mdev, gid, ipriv->qpn);
 	if (err)
 		mlx5_core_warn(mdev, "failed attaching QPN 0x%x, MGID %pI6\n",
-			       ipriv->qp.qpn, gid->raw);
+			       ipriv->qpn, gid->raw);
 
 	if (set_qkey) {
 		mlx5_core_dbg(mdev, "%s setting qkey 0x%x\n",
@@ -637,12 +644,13 @@ static int mlx5i_detach_mcast(struct net_device *netdev, struct ib_device *hca,
 	struct mlx5i_priv    *ipriv = epriv->ppriv;
 	int err;
 
-	mlx5_core_dbg(mdev, "detaching QPN 0x%x, MGID %pI6\n", ipriv->qp.qpn, gid->raw);
+	mlx5_core_dbg(mdev, "detaching QPN 0x%x, MGID %pI6\n", ipriv->qpn,
+		      gid->raw);
 
-	err = mlx5_core_detach_mcg(mdev, gid, ipriv->qp.qpn);
+	err = mlx5_core_detach_mcg(mdev, gid, ipriv->qpn);
 	if (err)
 		mlx5_core_dbg(mdev, "failed detaching QPN 0x%x, MGID %pI6\n",
-			      ipriv->qp.qpn, gid->raw);
+			      ipriv->qpn, gid->raw);
 
 	return err;
 }
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.h b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.h
index de7e01a027bb..3483ba642cfe 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.h
@@ -51,7 +51,7 @@ extern const struct ethtool_ops mlx5i_pkey_ethtool_ops;
 /* ipoib rdma netdev's private data structure */
 struct mlx5i_priv {
 	struct rdma_netdev rn; /* keep this first */
-	struct mlx5_core_qp qp;
+	u32 qpn;
 	bool   sub_interface;
 	u32    qkey;
 	u16    pkey_index;
@@ -62,8 +62,8 @@ struct mlx5i_priv {
 int mlx5i_create_tis(struct mlx5_core_dev *mdev, u32 underlay_qpn, u32 *tisn);
 
 /* Underlay QP create/destroy functions */
-int mlx5i_create_underlay_qp(struct mlx5_core_dev *mdev, struct mlx5_core_qp *qp);
-void mlx5i_destroy_underlay_qp(struct mlx5_core_dev *mdev, struct mlx5_core_qp *qp);
+int mlx5i_create_underlay_qp(struct mlx5e_priv *priv);
+void mlx5i_destroy_underlay_qp(struct mlx5_core_dev *mdev, u32 qpn);
 
 /* Underlay QP state modification init/uninit functions */
 int mlx5i_init_underlay_qp(struct mlx5e_priv *priv);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c
index 96e64187c089..b9af37ad40bf 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c
@@ -204,13 +204,13 @@ static int mlx5i_pkey_open(struct net_device *netdev)
 		goto err_release_lock;
 	}
 
-	err = mlx5_fs_add_rx_underlay_qpn(mdev, ipriv->qp.qpn);
+	err = mlx5_fs_add_rx_underlay_qpn(mdev, ipriv->qpn);
 	if (err) {
 		mlx5_core_warn(mdev, "attach child underlay qp to ft failed, %d\n", err);
 		goto err_unint_underlay_qp;
 	}
 
-	err = mlx5i_create_tis(mdev, ipriv->qp.qpn, &epriv->tisn[0][0]);
+	err = mlx5i_create_tis(mdev, ipriv->qpn, &epriv->tisn[0][0]);
 	if (err) {
 		mlx5_core_warn(mdev, "create child tis failed, %d\n", err);
 		goto err_remove_rx_uderlay_qp;
@@ -230,7 +230,7 @@ static int mlx5i_pkey_open(struct net_device *netdev)
 err_clear_state_opened_flag:
 	mlx5e_destroy_tis(mdev, epriv->tisn[0][0]);
 err_remove_rx_uderlay_qp:
-	mlx5_fs_remove_rx_underlay_qpn(mdev, ipriv->qp.qpn);
+	mlx5_fs_remove_rx_underlay_qpn(mdev, ipriv->qpn);
 err_unint_underlay_qp:
 	mlx5i_uninit_underlay_qp(epriv);
 err_release_lock:
@@ -253,7 +253,7 @@ static int mlx5i_pkey_close(struct net_device *netdev)
 	clear_bit(MLX5E_STATE_OPENED, &priv->state);
 
 	netif_carrier_off(priv->netdev);
-	mlx5_fs_remove_rx_underlay_qpn(mdev, ipriv->qp.qpn);
+	mlx5_fs_remove_rx_underlay_qpn(mdev, ipriv->qpn);
 	mlx5i_uninit_underlay_qp(priv);
 	mlx5e_deactivate_priv_channels(priv);
 	mlx5e_close_channels(&priv->channels);
@@ -307,23 +307,20 @@ static void mlx5i_pkey_cleanup(struct mlx5e_priv *priv)
 
 static int mlx5i_pkey_init_tx(struct mlx5e_priv *priv)
 {
-	struct mlx5i_priv *ipriv = priv->ppriv;
 	int err;
 
-	err = mlx5i_create_underlay_qp(priv->mdev, &ipriv->qp);
-	if (err) {
+	err = mlx5i_create_underlay_qp(priv);
+	if (err)
 		mlx5_core_warn(priv->mdev, "create child underlay QP failed, %d\n", err);
-		return err;
-	}
 
-	return 0;
+	return err;
 }
 
 static void mlx5i_pkey_cleanup_tx(struct mlx5e_priv *priv)
 {
 	struct mlx5i_priv *ipriv = priv->ppriv;
 
-	mlx5i_destroy_underlay_qp(priv->mdev, &ipriv->qp);
+	mlx5i_destroy_underlay_qp(priv->mdev, ipriv->qpn);
 }
 
 static int mlx5i_pkey_init_rx(struct mlx5e_priv *priv)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
index 93052b07c76c..c6ad5ca46877 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
@@ -47,8 +47,7 @@ static DEFINE_MUTEX(lag_mutex);
 static int mlx5_cmd_create_lag(struct mlx5_core_dev *dev, u8 remap_port1,
 			       u8 remap_port2)
 {
-	u32   in[MLX5_ST_SZ_DW(create_lag_in)]   = {0};
-	u32   out[MLX5_ST_SZ_DW(create_lag_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(create_lag_in)] = {};
 	void *lag_ctx = MLX5_ADDR_OF(create_lag_in, in, ctx);
 
 	MLX5_SET(create_lag_in, in, opcode, MLX5_CMD_OP_CREATE_LAG);
@@ -56,14 +55,13 @@ static int mlx5_cmd_create_lag(struct mlx5_core_dev *dev, u8 remap_port1,
 	MLX5_SET(lagc, lag_ctx, tx_remap_affinity_1, remap_port1);
 	MLX5_SET(lagc, lag_ctx, tx_remap_affinity_2, remap_port2);
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, create_lag, in);
 }
 
 static int mlx5_cmd_modify_lag(struct mlx5_core_dev *dev, u8 remap_port1,
 			       u8 remap_port2)
 {
-	u32   in[MLX5_ST_SZ_DW(modify_lag_in)]   = {0};
-	u32   out[MLX5_ST_SZ_DW(modify_lag_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(modify_lag_in)] = {};
 	void *lag_ctx = MLX5_ADDR_OF(modify_lag_in, in, ctx);
 
 	MLX5_SET(modify_lag_in, in, opcode, MLX5_CMD_OP_MODIFY_LAG);
@@ -72,52 +70,29 @@ static int mlx5_cmd_modify_lag(struct mlx5_core_dev *dev, u8 remap_port1,
 	MLX5_SET(lagc, lag_ctx, tx_remap_affinity_1, remap_port1);
 	MLX5_SET(lagc, lag_ctx, tx_remap_affinity_2, remap_port2);
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-}
-
-static int mlx5_cmd_destroy_lag(struct mlx5_core_dev *dev)
-{
-	u32  in[MLX5_ST_SZ_DW(destroy_lag_in)]  = {0};
-	u32 out[MLX5_ST_SZ_DW(destroy_lag_out)] = {0};
-
-	MLX5_SET(destroy_lag_in, in, opcode, MLX5_CMD_OP_DESTROY_LAG);
-
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, modify_lag, in);
 }
 
 int mlx5_cmd_create_vport_lag(struct mlx5_core_dev *dev)
 {
-	u32  in[MLX5_ST_SZ_DW(create_vport_lag_in)]  = {0};
-	u32 out[MLX5_ST_SZ_DW(create_vport_lag_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(create_vport_lag_in)] = {};
 
 	MLX5_SET(create_vport_lag_in, in, opcode, MLX5_CMD_OP_CREATE_VPORT_LAG);
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, create_vport_lag, in);
 }
 EXPORT_SYMBOL(mlx5_cmd_create_vport_lag);
 
 int mlx5_cmd_destroy_vport_lag(struct mlx5_core_dev *dev)
 {
-	u32  in[MLX5_ST_SZ_DW(destroy_vport_lag_in)]  = {0};
-	u32 out[MLX5_ST_SZ_DW(destroy_vport_lag_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_vport_lag_in)] = {};
 
 	MLX5_SET(destroy_vport_lag_in, in, opcode, MLX5_CMD_OP_DESTROY_VPORT_LAG);
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, destroy_vport_lag, in);
 }
 EXPORT_SYMBOL(mlx5_cmd_destroy_vport_lag);
 
-static int mlx5_cmd_query_cong_counter(struct mlx5_core_dev *dev,
-				       bool reset, void *out, int out_size)
-{
-	u32 in[MLX5_ST_SZ_DW(query_cong_statistics_in)] = { };
-
-	MLX5_SET(query_cong_statistics_in, in, opcode,
-		 MLX5_CMD_OP_QUERY_CONG_STATISTICS);
-	MLX5_SET(query_cong_statistics_in, in, clear, reset);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, out_size);
-}
-
 int mlx5_lag_dev_get_netdev_idx(struct mlx5_lag *ldev,
 				struct net_device *ndev)
 {
@@ -232,12 +207,14 @@ int mlx5_activate_lag(struct mlx5_lag *ldev,
 static int mlx5_deactivate_lag(struct mlx5_lag *ldev)
 {
 	struct mlx5_core_dev *dev0 = ldev->pf[MLX5_LAG_P1].dev;
+	u32 in[MLX5_ST_SZ_DW(destroy_lag_in)] = {};
 	bool roce_lag = __mlx5_lag_is_roce(ldev);
 	int err;
 
 	ldev->flags &= ~MLX5_LAG_MODE_FLAGS;
 
-	err = mlx5_cmd_destroy_lag(dev0);
+	MLX5_SET(destroy_lag_in, in, opcode, MLX5_CMD_OP_DESTROY_LAG);
+	err = mlx5_cmd_exec_in(dev0, destroy_lag, in);
 	if (err) {
 		if (roce_lag) {
 			mlx5_core_err(dev0,
@@ -758,7 +735,12 @@ int mlx5_lag_query_cong_counters(struct mlx5_core_dev *dev,
 	}
 
 	for (i = 0; i < num_ports; ++i) {
-		ret = mlx5_cmd_query_cong_counter(mdev[i], false, out, outlen);
+		u32 in[MLX5_ST_SZ_DW(query_cong_statistics_in)] = {};
+
+		MLX5_SET(query_cong_statistics_in, in, opcode,
+			 MLX5_CMD_OP_QUERY_CONG_STATISTICS);
+		ret = mlx5_cmd_exec_inout(mdev[i], query_cong_statistics, in,
+					  out);
 		if (ret)
 			goto unlock;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/dm.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/dm.c
index 6cbccba56f70..3d5e57ff558c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/dm.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/dm.c
@@ -90,7 +90,8 @@ void mlx5_dm_cleanup(struct mlx5_core_dev *dev)
 }
 
 int mlx5_dm_sw_icm_alloc(struct mlx5_core_dev *dev, enum mlx5_sw_icm_type type,
-			 u64 length, u16 uid, phys_addr_t *addr, u32 *obj_id)
+			 u64 length, u32 log_alignment, u16 uid,
+			 phys_addr_t *addr, u32 *obj_id)
 {
 	u32 num_blocks = DIV_ROUND_UP_ULL(length, MLX5_SW_ICM_BLOCK_SIZE(dev));
 	u32 out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {};
@@ -99,6 +100,7 @@ int mlx5_dm_sw_icm_alloc(struct mlx5_core_dev *dev, enum mlx5_sw_icm_type type,
 	unsigned long *block_map;
 	u64 icm_start_addr;
 	u32 log_icm_size;
+	u64 align_mask;
 	u32 max_blocks;
 	u64 block_idx;
 	void *sw_icm;
@@ -136,11 +138,14 @@ int mlx5_dm_sw_icm_alloc(struct mlx5_core_dev *dev, enum mlx5_sw_icm_type type,
 		return -EOPNOTSUPP;
 
 	max_blocks = BIT(log_icm_size - MLX5_LOG_SW_ICM_BLOCK_SIZE(dev));
+
+	if (log_alignment < MLX5_LOG_SW_ICM_BLOCK_SIZE(dev))
+		log_alignment = MLX5_LOG_SW_ICM_BLOCK_SIZE(dev);
+	align_mask = BIT(log_alignment - MLX5_LOG_SW_ICM_BLOCK_SIZE(dev)) - 1;
+
 	spin_lock(&dm->lock);
-	block_idx = bitmap_find_next_zero_area(block_map,
-					       max_blocks,
-					       0,
-					       num_blocks, 0);
+	block_idx = bitmap_find_next_zero_area(block_map, max_blocks, 0,
+					       num_blocks, align_mask);
 
 	if (block_idx < max_blocks)
 		bitmap_set(block_map,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c
index 7722a3f9bb68..a68738c8f4bc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c
@@ -124,8 +124,7 @@ int mlx5_core_roce_gid_set(struct mlx5_core_dev *dev, unsigned int index,
 			   const u8 *mac, bool vlan, u16 vlan_id, u8 port_num)
 {
 #define MLX5_SET_RA(p, f, v) MLX5_SET(roce_addr_layout, p, f, v)
-	u32  in[MLX5_ST_SZ_DW(set_roce_address_in)] = {0};
-	u32 out[MLX5_ST_SZ_DW(set_roce_address_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(set_roce_address_in)] = {};
 	void *in_addr = MLX5_ADDR_OF(set_roce_address_in, in, roce_address);
 	char *addr_l3_addr = MLX5_ADDR_OF(roce_addr_layout, in_addr,
 					  source_l3_address);
@@ -153,6 +152,6 @@ int mlx5_core_roce_gid_set(struct mlx5_core_dev *dev, unsigned int index,
 
 	MLX5_SET(set_roce_address_in, in, roce_address_index, index);
 	MLX5_SET(set_roce_address_in, in, opcode, MLX5_CMD_OP_SET_ROCE_ADDRESS);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, set_roce_address, in);
 }
 EXPORT_SYMBOL(mlx5_core_roce_gid_set);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
index 3118e8d66407..fd8449ff9e17 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
@@ -40,8 +40,7 @@
 /* HW L2 Table (MPFS) management */
 static int set_l2table_entry_cmd(struct mlx5_core_dev *dev, u32 index, u8 *mac)
 {
-	u32 in[MLX5_ST_SZ_DW(set_l2_table_entry_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(set_l2_table_entry_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(set_l2_table_entry_in)] = {};
 	u8 *in_mac_addr;
 
 	MLX5_SET(set_l2_table_entry_in, in, opcode, MLX5_CMD_OP_SET_L2_TABLE_ENTRY);
@@ -50,17 +49,16 @@ static int set_l2table_entry_cmd(struct mlx5_core_dev *dev, u32 index, u8 *mac)
 	in_mac_addr = MLX5_ADDR_OF(set_l2_table_entry_in, in, mac_address);
 	ether_addr_copy(&in_mac_addr[2], mac);
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, set_l2_table_entry, in);
 }
 
 static int del_l2table_entry_cmd(struct mlx5_core_dev *dev, u32 index)
 {
-	u32 in[MLX5_ST_SZ_DW(delete_l2_table_entry_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(delete_l2_table_entry_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(delete_l2_table_entry_in)] = {};
 
 	MLX5_SET(delete_l2_table_entry_in, in, opcode, MLX5_CMD_OP_DELETE_L2_TABLE_ENTRY);
 	MLX5_SET(delete_l2_table_entry_in, in, table_index, index);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, delete_l2_table_entry, in);
 }
 
 /* UC L2 table hash node */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/port_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/port_tun.c
index 48b5c847b642..8809a65ecefb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/port_tun.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/port_tun.c
@@ -4,7 +4,6 @@
 #include <linux/module.h>
 #include <linux/mlx5/driver.h>
 #include <linux/mlx5/port.h>
-#include <linux/mlx5/cmd.h>
 #include "mlx5_core.h"
 #include "lib/port_tun.h"
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/vxlan.c
index 148b55c3db7a..82c766a95165 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/vxlan.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/vxlan.c
@@ -60,24 +60,22 @@ static inline u8 mlx5_vxlan_max_udp_ports(struct mlx5_core_dev *mdev)
 
 static int mlx5_vxlan_core_add_port_cmd(struct mlx5_core_dev *mdev, u16 port)
 {
-	u32 in[MLX5_ST_SZ_DW(add_vxlan_udp_dport_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(add_vxlan_udp_dport_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(add_vxlan_udp_dport_in)] = {};
 
 	MLX5_SET(add_vxlan_udp_dport_in, in, opcode,
 		 MLX5_CMD_OP_ADD_VXLAN_UDP_DPORT);
 	MLX5_SET(add_vxlan_udp_dport_in, in, vxlan_udp_port, port);
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(mdev, add_vxlan_udp_dport, in);
 }
 
 static int mlx5_vxlan_core_del_port_cmd(struct mlx5_core_dev *mdev, u16 port)
 {
-	u32 in[MLX5_ST_SZ_DW(delete_vxlan_udp_dport_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(delete_vxlan_udp_dport_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(delete_vxlan_udp_dport_in)] = {};
 
 	MLX5_SET(delete_vxlan_udp_dport_in, in, opcode,
 		 MLX5_CMD_OP_DELETE_VXLAN_UDP_DPORT);
 	MLX5_SET(delete_vxlan_udp_dport_in, in, vxlan_udp_port, port);
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(mdev, delete_vxlan_udp_dport, in);
 }
 
 static struct mlx5_vxlan_port*
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 7af4210c1b96..fbbf51026b52 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -206,8 +206,7 @@ static void mlx5_set_driver_version(struct mlx5_core_dev *dev)
 {
 	int driver_ver_sz = MLX5_FLD_SZ_BYTES(set_driver_version_in,
 					      driver_version);
-	u8 in[MLX5_ST_SZ_BYTES(set_driver_version_in)] = {0};
-	u8 out[MLX5_ST_SZ_BYTES(set_driver_version_out)] = {0};
+	u8 in[MLX5_ST_SZ_BYTES(set_driver_version_in)] = {};
 	int remaining_size = driver_ver_sz;
 	char *string;
 
@@ -234,7 +233,7 @@ static void mlx5_set_driver_version(struct mlx5_core_dev *dev)
 	MLX5_SET(set_driver_version_in, in, opcode,
 		 MLX5_CMD_OP_SET_DRIVER_VERSION);
 
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(dev, set_driver_version, in);
 }
 
 static int set_dma_caps(struct pci_dev *pdev)
@@ -366,7 +365,7 @@ static int mlx5_core_get_caps_mode(struct mlx5_core_dev *dev,
 
 	MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 	MLX5_SET(query_hca_cap_in, in, op_mod, opmod);
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, out_sz);
+	err = mlx5_cmd_exec_inout(dev, query_hca_cap, in, out);
 	if (err) {
 		mlx5_core_warn(dev,
 			       "QUERY_HCA_CAP : type(%x) opmode(%x) Failed(%d)\n",
@@ -407,30 +406,25 @@ int mlx5_core_get_caps(struct mlx5_core_dev *dev, enum mlx5_cap_type cap_type)
 	return mlx5_core_get_caps_mode(dev, cap_type, HCA_CAP_OPMOD_GET_MAX);
 }
 
-static int set_caps(struct mlx5_core_dev *dev, void *in, int in_sz, int opmod)
+static int set_caps(struct mlx5_core_dev *dev, void *in, int opmod)
 {
-	u32 out[MLX5_ST_SZ_DW(set_hca_cap_out)] = {0};
-
 	MLX5_SET(set_hca_cap_in, in, opcode, MLX5_CMD_OP_SET_HCA_CAP);
 	MLX5_SET(set_hca_cap_in, in, op_mod, opmod << 1);
-	return mlx5_cmd_exec(dev, in, in_sz, out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, set_hca_cap, in);
 }
 
-static int handle_hca_cap_atomic(struct mlx5_core_dev *dev)
+static int handle_hca_cap_atomic(struct mlx5_core_dev *dev, void *set_ctx)
 {
-	void *set_ctx;
 	void *set_hca_cap;
-	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
 	int req_endianness;
 	int err;
 
-	if (MLX5_CAP_GEN(dev, atomic)) {
-		err = mlx5_core_get_caps(dev, MLX5_CAP_ATOMIC);
-		if (err)
-			return err;
-	} else {
+	if (!MLX5_CAP_GEN(dev, atomic))
 		return 0;
-	}
+
+	err = mlx5_core_get_caps(dev, MLX5_CAP_ATOMIC);
+	if (err)
+		return err;
 
 	req_endianness =
 		MLX5_CAP_ATOMIC(dev,
@@ -439,27 +433,18 @@ static int handle_hca_cap_atomic(struct mlx5_core_dev *dev)
 	if (req_endianness != MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS)
 		return 0;
 
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		return -ENOMEM;
-
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, capability);
 
 	/* Set requestor to host endianness */
 	MLX5_SET(atomic_caps, set_hca_cap, atomic_req_8B_endianness_mode,
 		 MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS);
 
-	err = set_caps(dev, set_ctx, set_sz, MLX5_SET_HCA_CAP_OP_MOD_ATOMIC);
-
-	kfree(set_ctx);
-	return err;
+	return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ATOMIC);
 }
 
-static int handle_hca_cap_odp(struct mlx5_core_dev *dev)
+static int handle_hca_cap_odp(struct mlx5_core_dev *dev, void *set_ctx)
 {
 	void *set_hca_cap;
-	void *set_ctx;
-	int set_sz;
 	bool do_set = false;
 	int err;
 
@@ -471,11 +456,6 @@ static int handle_hca_cap_odp(struct mlx5_core_dev *dev)
 	if (err)
 		return err;
 
-	set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		return -ENOMEM;
-
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, capability);
 	memcpy(set_hca_cap, dev->caps.hca_cur[MLX5_CAP_ODP],
 	       MLX5_ST_SZ_BYTES(odp_cap));
@@ -504,30 +484,21 @@ static int handle_hca_cap_odp(struct mlx5_core_dev *dev)
 	ODP_CAP_SET_MAX(dev, dc_odp_caps.read);
 	ODP_CAP_SET_MAX(dev, dc_odp_caps.atomic);
 
-	if (do_set)
-		err = set_caps(dev, set_ctx, set_sz,
-			       MLX5_SET_HCA_CAP_OP_MOD_ODP);
-
-	kfree(set_ctx);
+	if (!do_set)
+		return 0;
 
-	return err;
+	return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ODP);
 }
 
-static int handle_hca_cap(struct mlx5_core_dev *dev)
+static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
 {
-	void *set_ctx = NULL;
 	struct mlx5_profile *prof = dev->profile;
-	int err = -ENOMEM;
-	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
 	void *set_hca_cap;
-
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		goto query_ex;
+	int err;
 
 	err = mlx5_core_get_caps(dev, MLX5_CAP_GENERAL);
 	if (err)
-		goto query_ex;
+		return err;
 
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx,
 				   capability);
@@ -578,37 +549,73 @@ static int handle_hca_cap(struct mlx5_core_dev *dev)
 			 num_vhca_ports,
 			 MLX5_CAP_GEN_MAX(dev, num_vhca_ports));
 
-	err = set_caps(dev, set_ctx, set_sz,
-		       MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
+	return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
+}
 
-query_ex:
-	kfree(set_ctx);
+static int handle_hca_cap_roce(struct mlx5_core_dev *dev, void *set_ctx)
+{
+	void *set_hca_cap;
+	int err;
+
+	if (!MLX5_CAP_GEN(dev, roce))
+		return 0;
+
+	err = mlx5_core_get_caps(dev, MLX5_CAP_ROCE);
+	if (err)
+		return err;
+
+	if (MLX5_CAP_ROCE(dev, sw_r_roce_src_udp_port) ||
+	    !MLX5_CAP_ROCE_MAX(dev, sw_r_roce_src_udp_port))
+		return 0;
+
+	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, capability);
+	memcpy(set_hca_cap, dev->caps.hca_cur[MLX5_CAP_ROCE],
+	       MLX5_ST_SZ_BYTES(roce_cap));
+	MLX5_SET(roce_cap, set_hca_cap, sw_r_roce_src_udp_port, 1);
+
+	err = set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ROCE);
 	return err;
 }
 
 static int set_hca_cap(struct mlx5_core_dev *dev)
 {
+	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
+	void *set_ctx;
 	int err;
 
-	err = handle_hca_cap(dev);
+	set_ctx = kzalloc(set_sz, GFP_KERNEL);
+	if (!set_ctx)
+		return -ENOMEM;
+
+	err = handle_hca_cap(dev, set_ctx);
 	if (err) {
 		mlx5_core_err(dev, "handle_hca_cap failed\n");
 		goto out;
 	}
 
-	err = handle_hca_cap_atomic(dev);
+	memset(set_ctx, 0, set_sz);
+	err = handle_hca_cap_atomic(dev, set_ctx);
 	if (err) {
 		mlx5_core_err(dev, "handle_hca_cap_atomic failed\n");
 		goto out;
 	}
 
-	err = handle_hca_cap_odp(dev);
+	memset(set_ctx, 0, set_sz);
+	err = handle_hca_cap_odp(dev, set_ctx);
 	if (err) {
 		mlx5_core_err(dev, "handle_hca_cap_odp failed\n");
 		goto out;
 	}
 
+	memset(set_ctx, 0, set_sz);
+	err = handle_hca_cap_roce(dev, set_ctx);
+	if (err) {
+		mlx5_core_err(dev, "handle_hca_cap_roce failed\n");
+		goto out;
+	}
+
 out:
+	kfree(set_ctx);
 	return err;
 }
 
@@ -642,26 +649,24 @@ static int mlx5_core_set_hca_defaults(struct mlx5_core_dev *dev)
 
 int mlx5_core_enable_hca(struct mlx5_core_dev *dev, u16 func_id)
 {
-	u32 out[MLX5_ST_SZ_DW(enable_hca_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(enable_hca_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(enable_hca_in)] = {};
 
 	MLX5_SET(enable_hca_in, in, opcode, MLX5_CMD_OP_ENABLE_HCA);
 	MLX5_SET(enable_hca_in, in, function_id, func_id);
 	MLX5_SET(enable_hca_in, in, embedded_cpu_function,
 		 dev->caps.embedded_cpu);
-	return mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, enable_hca, in);
 }
 
 int mlx5_core_disable_hca(struct mlx5_core_dev *dev, u16 func_id)
 {
-	u32 out[MLX5_ST_SZ_DW(disable_hca_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(disable_hca_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(disable_hca_in)] = {};
 
 	MLX5_SET(disable_hca_in, in, opcode, MLX5_CMD_OP_DISABLE_HCA);
 	MLX5_SET(disable_hca_in, in, function_id, func_id);
 	MLX5_SET(enable_hca_in, in, embedded_cpu_function,
 		 dev->caps.embedded_cpu);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, disable_hca, in);
 }
 
 u64 mlx5_read_internal_timer(struct mlx5_core_dev *dev,
@@ -686,14 +691,13 @@ u64 mlx5_read_internal_timer(struct mlx5_core_dev *dev,
 
 static int mlx5_core_set_issi(struct mlx5_core_dev *dev)
 {
-	u32 query_in[MLX5_ST_SZ_DW(query_issi_in)]   = {0};
-	u32 query_out[MLX5_ST_SZ_DW(query_issi_out)] = {0};
+	u32 query_out[MLX5_ST_SZ_DW(query_issi_out)] = {};
+	u32 query_in[MLX5_ST_SZ_DW(query_issi_in)] = {};
 	u32 sup_issi;
 	int err;
 
 	MLX5_SET(query_issi_in, query_in, opcode, MLX5_CMD_OP_QUERY_ISSI);
-	err = mlx5_cmd_exec(dev, query_in, sizeof(query_in),
-			    query_out, sizeof(query_out));
+	err = mlx5_cmd_exec_inout(dev, query_issi, query_in, query_out);
 	if (err) {
 		u32 syndrome;
 		u8 status;
@@ -713,13 +717,11 @@ static int mlx5_core_set_issi(struct mlx5_core_dev *dev)
 	sup_issi = MLX5_GET(query_issi_out, query_out, supported_issi_dw0);
 
 	if (sup_issi & (1 << 1)) {
-		u32 set_in[MLX5_ST_SZ_DW(set_issi_in)]   = {0};
-		u32 set_out[MLX5_ST_SZ_DW(set_issi_out)] = {0};
+		u32 set_in[MLX5_ST_SZ_DW(set_issi_in)] = {};
 
 		MLX5_SET(set_issi_in, set_in, opcode, MLX5_CMD_OP_SET_ISSI);
 		MLX5_SET(set_issi_in, set_in, current_issi, 1);
-		err = mlx5_cmd_exec(dev, set_in, sizeof(set_in),
-				    set_out, sizeof(set_out));
+		err = mlx5_cmd_exec_in(dev, set_issi, set_in);
 		if (err) {
 			mlx5_core_err(dev, "Failed to set ISSI to 1 err(%d)\n",
 				      err);
@@ -782,7 +784,7 @@ static int mlx5_pci_init(struct mlx5_core_dev *dev, struct pci_dev *pdev,
 	}
 
 	mlx5_pci_vsc_init(dev);
-
+	dev->caps.embedded_cpu = mlx5_read_embedded_cpu(dev);
 	return 0;
 
 err_clr_master:
@@ -836,8 +838,6 @@ static int mlx5_init_once(struct mlx5_core_dev *dev)
 
 	mlx5_cq_debugfs_init(dev);
 
-	mlx5_init_qp_table(dev);
-
 	mlx5_init_reserved_gids(dev);
 
 	mlx5_init_clock(dev);
@@ -896,7 +896,6 @@ static int mlx5_init_once(struct mlx5_core_dev *dev)
 err_tables_cleanup:
 	mlx5_geneve_destroy(dev->geneve);
 	mlx5_vxlan_destroy(dev->vxlan);
-	mlx5_cleanup_qp_table(dev);
 	mlx5_cq_debugfs_cleanup(dev);
 	mlx5_events_cleanup(dev);
 err_eq_cleanup:
@@ -924,7 +923,6 @@ static void mlx5_cleanup_once(struct mlx5_core_dev *dev)
 	mlx5_vxlan_destroy(dev->vxlan);
 	mlx5_cleanup_clock(dev);
 	mlx5_cleanup_reserved_gids(dev);
-	mlx5_cleanup_qp_table(dev);
 	mlx5_cq_debugfs_cleanup(dev);
 	mlx5_events_cleanup(dev);
 	mlx5_eq_table_cleanup(dev);
@@ -1180,7 +1178,6 @@ int mlx5_load_one(struct mlx5_core_dev *dev, bool boot)
 {
 	int err = 0;
 
-	dev->caps.embedded_cpu = mlx5_read_embedded_cpu(dev);
 	mutex_lock(&dev->intf_state_mutex);
 	if (test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) {
 		mlx5_core_warn(dev, "interface is up, NOP\n");
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mcg.c b/drivers/net/ethernet/mellanox/mlx5/core/mcg.c
index ba2b09cc192f..e019d68062d8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mcg.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mcg.c
@@ -33,34 +33,31 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include <rdma/ib_verbs.h>
 #include "mlx5_core.h"
 
 int mlx5_core_attach_mcg(struct mlx5_core_dev *dev, union ib_gid *mgid, u32 qpn)
 {
-	u32 out[MLX5_ST_SZ_DW(attach_to_mcg_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(attach_to_mcg_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(attach_to_mcg_in)] = {};
 	void *gid;
 
 	MLX5_SET(attach_to_mcg_in, in, opcode, MLX5_CMD_OP_ATTACH_TO_MCG);
 	MLX5_SET(attach_to_mcg_in, in, qpn, qpn);
 	gid = MLX5_ADDR_OF(attach_to_mcg_in, in, multicast_gid);
 	memcpy(gid, mgid, sizeof(*mgid));
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, attach_to_mcg, in);
 }
 EXPORT_SYMBOL(mlx5_core_attach_mcg);
 
 int mlx5_core_detach_mcg(struct mlx5_core_dev *dev, union ib_gid *mgid, u32 qpn)
 {
-	u32 out[MLX5_ST_SZ_DW(detach_from_mcg_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(detach_from_mcg_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(detach_from_mcg_in)] = {};
 	void *gid;
 
 	MLX5_SET(detach_from_mcg_in, in, opcode, MLX5_CMD_OP_DETACH_FROM_MCG);
 	MLX5_SET(detach_from_mcg_in, in, qpn, qpn);
 	gid = MLX5_ADDR_OF(detach_from_mcg_in, in, multicast_gid);
 	memcpy(gid, mgid, sizeof(*mgid));
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, detach_from_mcg, in);
 }
 EXPORT_SYMBOL(mlx5_core_detach_mcg);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mr.c b/drivers/net/ethernet/mellanox/mlx5/core/mr.c
index 366f2cbfc6db..9eb51f06d3ae 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mr.c
@@ -33,14 +33,13 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include "mlx5_core.h"
 
 int mlx5_core_create_mkey(struct mlx5_core_dev *dev,
 			  struct mlx5_core_mkey *mkey,
 			  u32 *in, int inlen)
 {
-	u32 lout[MLX5_ST_SZ_DW(create_mkey_out)] = {0};
+	u32 lout[MLX5_ST_SZ_DW(create_mkey_out)] = {};
 	u32 mkey_index;
 	void *mkc;
 	int err;
@@ -66,19 +65,18 @@ EXPORT_SYMBOL(mlx5_core_create_mkey);
 int mlx5_core_destroy_mkey(struct mlx5_core_dev *dev,
 			   struct mlx5_core_mkey *mkey)
 {
-	u32 out[MLX5_ST_SZ_DW(destroy_mkey_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(destroy_mkey_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_mkey_in)] = {};
 
 	MLX5_SET(destroy_mkey_in, in, opcode, MLX5_CMD_OP_DESTROY_MKEY);
 	MLX5_SET(destroy_mkey_in, in, mkey_index, mlx5_mkey_to_idx(mkey->key));
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, destroy_mkey, in);
 }
 EXPORT_SYMBOL(mlx5_core_destroy_mkey);
 
 int mlx5_core_query_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mkey *mkey,
 			 u32 *out, int outlen)
 {
-	u32 in[MLX5_ST_SZ_DW(query_mkey_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(query_mkey_in)] = {};
 
 	memset(out, 0, outlen);
 	MLX5_SET(query_mkey_in, in, opcode, MLX5_CMD_OP_QUERY_MKEY);
@@ -100,8 +98,8 @@ static inline u32 mlx5_get_psv(u32 *out, int psv_index)
 int mlx5_core_create_psv(struct mlx5_core_dev *dev, u32 pdn,
 			 int npsvs, u32 *sig_index)
 {
-	u32 out[MLX5_ST_SZ_DW(create_psv_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(create_psv_in)]   = {0};
+	u32 out[MLX5_ST_SZ_DW(create_psv_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(create_psv_in)] = {};
 	int i, err;
 
 	if (npsvs > MLX5_MAX_PSVS)
@@ -111,7 +109,7 @@ int mlx5_core_create_psv(struct mlx5_core_dev *dev, u32 pdn,
 	MLX5_SET(create_psv_in, in, pd, pdn);
 	MLX5_SET(create_psv_in, in, num_psv, npsvs);
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, create_psv, in, out);
 	if (err)
 		return err;
 
@@ -124,11 +122,10 @@ EXPORT_SYMBOL(mlx5_core_create_psv);
 
 int mlx5_core_destroy_psv(struct mlx5_core_dev *dev, int psv_num)
 {
-	u32 out[MLX5_ST_SZ_DW(destroy_psv_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(destroy_psv_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_psv_in)] = {};
 
 	MLX5_SET(destroy_psv_in, in, opcode, MLX5_CMD_OP_DESTROY_PSV);
 	MLX5_SET(destroy_psv_in, in, psvn, psv_num);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, destroy_psv, in);
 }
 EXPORT_SYMBOL(mlx5_core_destroy_psv);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
index 91bd258ecf1b..3d6f617abb7d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
@@ -35,7 +35,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include "mlx5_core.h"
 #include "lib/eq.h"
 
@@ -136,8 +135,8 @@ static struct fw_page *find_fw_page(struct mlx5_core_dev *dev, u64 addr)
 static int mlx5_cmd_query_pages(struct mlx5_core_dev *dev, u16 *func_id,
 				s32 *npages, int boot)
 {
-	u32 out[MLX5_ST_SZ_DW(query_pages_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(query_pages_in)]   = {0};
+	u32 out[MLX5_ST_SZ_DW(query_pages_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_pages_in)] = {};
 	int err;
 
 	MLX5_SET(query_pages_in, in, opcode, MLX5_CMD_OP_QUERY_PAGES);
@@ -146,7 +145,7 @@ static int mlx5_cmd_query_pages(struct mlx5_core_dev *dev, u16 *func_id,
 		 MLX5_QUERY_PAGES_IN_OP_MOD_INIT_PAGES);
 	MLX5_SET(query_pages_in, in, embedded_cpu_function, mlx5_core_is_ecpf(dev));
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, query_pages, in, out);
 	if (err)
 		return err;
 
@@ -257,8 +256,7 @@ static int alloc_system_page(struct mlx5_core_dev *dev, u16 func_id)
 static void page_notify_fail(struct mlx5_core_dev *dev, u16 func_id,
 			     bool ec_function)
 {
-	u32 out[MLX5_ST_SZ_DW(manage_pages_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(manage_pages_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(manage_pages_in)] = {};
 	int err;
 
 	MLX5_SET(manage_pages_in, in, opcode, MLX5_CMD_OP_MANAGE_PAGES);
@@ -266,7 +264,7 @@ static void page_notify_fail(struct mlx5_core_dev *dev, u16 func_id,
 	MLX5_SET(manage_pages_in, in, function_id, func_id);
 	MLX5_SET(manage_pages_in, in, embedded_cpu_function, ec_function);
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_in(dev, manage_pages, in);
 	if (err)
 		mlx5_core_warn(dev, "page notify failed func_id(%d) err(%d)\n",
 			       func_id, err);
@@ -374,7 +372,7 @@ static int reclaim_pages(struct mlx5_core_dev *dev, u32 func_id, int npages,
 			 int *nclaimed, bool ec_function)
 {
 	int outlen = MLX5_ST_SZ_BYTES(manage_pages_out);
-	u32 in[MLX5_ST_SZ_DW(manage_pages_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(manage_pages_in)] = {};
 	int num_claimed;
 	u32 *out;
 	int err;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pd.c b/drivers/net/ethernet/mellanox/mlx5/core/pd.c
index bd830d8d6c5f..aabc53ad8bdd 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/pd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/pd.c
@@ -33,17 +33,16 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include "mlx5_core.h"
 
 int mlx5_core_alloc_pd(struct mlx5_core_dev *dev, u32 *pdn)
 {
-	u32 out[MLX5_ST_SZ_DW(alloc_pd_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(alloc_pd_in)]   = {0};
+	u32 out[MLX5_ST_SZ_DW(alloc_pd_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(alloc_pd_in)] = {};
 	int err;
 
 	MLX5_SET(alloc_pd_in, in, opcode, MLX5_CMD_OP_ALLOC_PD);
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, alloc_pd, in, out);
 	if (!err)
 		*pdn = MLX5_GET(alloc_pd_out, out, pd);
 	return err;
@@ -52,11 +51,10 @@ EXPORT_SYMBOL(mlx5_core_alloc_pd);
 
 int mlx5_core_dealloc_pd(struct mlx5_core_dev *dev, u32 pdn)
 {
-	u32 out[MLX5_ST_SZ_DW(dealloc_pd_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(dealloc_pd_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(dealloc_pd_in)] = {};
 
 	MLX5_SET(dealloc_pd_in, in, opcode, MLX5_CMD_OP_DEALLOC_PD);
 	MLX5_SET(dealloc_pd_in, in, pd, pdn);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, dealloc_pd, in);
 }
 EXPORT_SYMBOL(mlx5_core_dealloc_pd);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index cc262b30aed5..9f829e68fc73 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -763,24 +763,23 @@ EXPORT_SYMBOL_GPL(mlx5_query_port_ets_rate_limit);
 
 int mlx5_set_port_wol(struct mlx5_core_dev *mdev, u8 wol_mode)
 {
-	u32 in[MLX5_ST_SZ_DW(set_wol_rol_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(set_wol_rol_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(set_wol_rol_in)] = {};
 
 	MLX5_SET(set_wol_rol_in, in, opcode, MLX5_CMD_OP_SET_WOL_ROL);
 	MLX5_SET(set_wol_rol_in, in, wol_mode_valid, 1);
 	MLX5_SET(set_wol_rol_in, in, wol_mode, wol_mode);
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(mdev, set_wol_rol, in);
 }
 EXPORT_SYMBOL_GPL(mlx5_set_port_wol);
 
 int mlx5_query_port_wol(struct mlx5_core_dev *mdev, u8 *wol_mode)
 {
-	u32 in[MLX5_ST_SZ_DW(query_wol_rol_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(query_wol_rol_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(query_wol_rol_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_wol_rol_in)] = {};
 	int err;
 
 	MLX5_SET(query_wol_rol_in, in, opcode, MLX5_CMD_OP_QUERY_WOL_ROL);
-	err = mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(mdev, query_wol_rol, in, out);
 	if (!err)
 		*wol_mode = MLX5_GET(query_wol_rol_out, out, wol_mode);
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qp.c b/drivers/net/ethernet/mellanox/mlx5/core/qp.c
deleted file mode 100644
index c3aea4cc2fff..000000000000
--- a/drivers/net/ethernet/mellanox/mlx5/core/qp.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * Copyright (c) 2013-2015, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/gfp.h>
-#include <linux/export.h>
-#include <linux/mlx5/cmd.h>
-#include <linux/mlx5/qp.h>
-#include <linux/mlx5/driver.h>
-#include <linux/mlx5/transobj.h>
-
-#include "mlx5_core.h"
-#include "lib/eq.h"
-
-static int mlx5_core_drain_dct(struct mlx5_core_dev *dev,
-			       struct mlx5_core_dct *dct);
-
-static struct mlx5_core_rsc_common *
-mlx5_get_rsc(struct mlx5_qp_table *table, u32 rsn)
-{
-	struct mlx5_core_rsc_common *common;
-	unsigned long flags;
-
-	spin_lock_irqsave(&table->lock, flags);
-
-	common = radix_tree_lookup(&table->tree, rsn);
-	if (common)
-		refcount_inc(&common->refcount);
-
-	spin_unlock_irqrestore(&table->lock, flags);
-
-	return common;
-}
-
-void mlx5_core_put_rsc(struct mlx5_core_rsc_common *common)
-{
-	if (refcount_dec_and_test(&common->refcount))
-		complete(&common->free);
-}
-
-static u64 qp_allowed_event_types(void)
-{
-	u64 mask;
-
-	mask = BIT(MLX5_EVENT_TYPE_PATH_MIG) |
-	       BIT(MLX5_EVENT_TYPE_COMM_EST) |
-	       BIT(MLX5_EVENT_TYPE_SQ_DRAINED) |
-	       BIT(MLX5_EVENT_TYPE_SRQ_LAST_WQE) |
-	       BIT(MLX5_EVENT_TYPE_WQ_CATAS_ERROR) |
-	       BIT(MLX5_EVENT_TYPE_PATH_MIG_FAILED) |
-	       BIT(MLX5_EVENT_TYPE_WQ_INVAL_REQ_ERROR) |
-	       BIT(MLX5_EVENT_TYPE_WQ_ACCESS_ERROR);
-
-	return mask;
-}
-
-static u64 rq_allowed_event_types(void)
-{
-	u64 mask;
-
-	mask = BIT(MLX5_EVENT_TYPE_SRQ_LAST_WQE) |
-	       BIT(MLX5_EVENT_TYPE_WQ_CATAS_ERROR);
-
-	return mask;
-}
-
-static u64 sq_allowed_event_types(void)
-{
-	return BIT(MLX5_EVENT_TYPE_WQ_CATAS_ERROR);
-}
-
-static u64 dct_allowed_event_types(void)
-{
-	return BIT(MLX5_EVENT_TYPE_DCT_DRAINED);
-}
-
-static bool is_event_type_allowed(int rsc_type, int event_type)
-{
-	switch (rsc_type) {
-	case MLX5_EVENT_QUEUE_TYPE_QP:
-		return BIT(event_type) & qp_allowed_event_types();
-	case MLX5_EVENT_QUEUE_TYPE_RQ:
-		return BIT(event_type) & rq_allowed_event_types();
-	case MLX5_EVENT_QUEUE_TYPE_SQ:
-		return BIT(event_type) & sq_allowed_event_types();
-	case MLX5_EVENT_QUEUE_TYPE_DCT:
-		return BIT(event_type) & dct_allowed_event_types();
-	default:
-		WARN(1, "Event arrived for unknown resource type");
-		return false;
-	}
-}
-
-static int rsc_event_notifier(struct notifier_block *nb,
-			      unsigned long type, void *data)
-{
-	struct mlx5_core_rsc_common *common;
-	struct mlx5_qp_table *table;
-	struct mlx5_core_dev *dev;
-	struct mlx5_core_dct *dct;
-	u8 event_type = (u8)type;
-	struct mlx5_core_qp *qp;
-	struct mlx5_priv *priv;
-	struct mlx5_eqe *eqe;
-	u32 rsn;
-
-	switch (event_type) {
-	case MLX5_EVENT_TYPE_DCT_DRAINED:
-		eqe = data;
-		rsn = be32_to_cpu(eqe->data.dct.dctn) & 0xffffff;
-		rsn |= (MLX5_RES_DCT << MLX5_USER_INDEX_LEN);
-		break;
-	case MLX5_EVENT_TYPE_PATH_MIG:
-	case MLX5_EVENT_TYPE_COMM_EST:
-	case MLX5_EVENT_TYPE_SQ_DRAINED:
-	case MLX5_EVENT_TYPE_SRQ_LAST_WQE:
-	case MLX5_EVENT_TYPE_WQ_CATAS_ERROR:
-	case MLX5_EVENT_TYPE_PATH_MIG_FAILED:
-	case MLX5_EVENT_TYPE_WQ_INVAL_REQ_ERROR:
-	case MLX5_EVENT_TYPE_WQ_ACCESS_ERROR:
-		eqe = data;
-		rsn = be32_to_cpu(eqe->data.qp_srq.qp_srq_n) & 0xffffff;
-		rsn |= (eqe->data.qp_srq.type << MLX5_USER_INDEX_LEN);
-		break;
-	default:
-		return NOTIFY_DONE;
-	}
-
-	table = container_of(nb, struct mlx5_qp_table, nb);
-	priv  = container_of(table, struct mlx5_priv, qp_table);
-	dev   = container_of(priv, struct mlx5_core_dev, priv);
-
-	mlx5_core_dbg(dev, "event (%d) arrived on resource 0x%x\n", eqe->type, rsn);
-
-	common = mlx5_get_rsc(table, rsn);
-	if (!common) {
-		mlx5_core_dbg(dev, "Async event for unknown resource 0x%x\n", rsn);
-		return NOTIFY_OK;
-	}
-
-	if (!is_event_type_allowed((rsn >> MLX5_USER_INDEX_LEN), event_type)) {
-		mlx5_core_warn(dev, "event 0x%.2x is not allowed on resource 0x%.8x\n",
-			       event_type, rsn);
-		goto out;
-	}
-
-	switch (common->res) {
-	case MLX5_RES_QP:
-	case MLX5_RES_RQ:
-	case MLX5_RES_SQ:
-		qp = (struct mlx5_core_qp *)common;
-		qp->event(qp, event_type);
-		break;
-	case MLX5_RES_DCT:
-		dct = (struct mlx5_core_dct *)common;
-		if (event_type == MLX5_EVENT_TYPE_DCT_DRAINED)
-			complete(&dct->drained);
-		break;
-	default:
-		mlx5_core_warn(dev, "invalid resource type for 0x%x\n", rsn);
-	}
-out:
-	mlx5_core_put_rsc(common);
-
-	return NOTIFY_OK;
-}
-
-static int create_resource_common(struct mlx5_core_dev *dev,
-				  struct mlx5_core_qp *qp,
-				  int rsc_type)
-{
-	struct mlx5_qp_table *table = &dev->priv.qp_table;
-	int err;
-
-	qp->common.res = rsc_type;
-	spin_lock_irq(&table->lock);
-	err = radix_tree_insert(&table->tree,
-				qp->qpn | (rsc_type << MLX5_USER_INDEX_LEN),
-				qp);
-	spin_unlock_irq(&table->lock);
-	if (err)
-		return err;
-
-	refcount_set(&qp->common.refcount, 1);
-	init_completion(&qp->common.free);
-	qp->pid = current->pid;
-
-	return 0;
-}
-
-static void destroy_resource_common(struct mlx5_core_dev *dev,
-				    struct mlx5_core_qp *qp)
-{
-	struct mlx5_qp_table *table = &dev->priv.qp_table;
-	unsigned long flags;
-
-	spin_lock_irqsave(&table->lock, flags);
-	radix_tree_delete(&table->tree,
-			  qp->qpn | (qp->common.res << MLX5_USER_INDEX_LEN));
-	spin_unlock_irqrestore(&table->lock, flags);
-	mlx5_core_put_rsc((struct mlx5_core_rsc_common *)qp);
-	wait_for_completion(&qp->common.free);
-}
-
-static int _mlx5_core_destroy_dct(struct mlx5_core_dev *dev,
-				  struct mlx5_core_dct *dct, bool need_cleanup)
-{
-	u32 out[MLX5_ST_SZ_DW(destroy_dct_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(destroy_dct_in)]   = {0};
-	struct mlx5_core_qp *qp = &dct->mqp;
-	int err;
-
-	err = mlx5_core_drain_dct(dev, dct);
-	if (err) {
-		if (dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) {
-			goto destroy;
-		} else {
-			mlx5_core_warn(
-				dev, "failed drain DCT 0x%x with error 0x%x\n",
-				qp->qpn, err);
-			return err;
-		}
-	}
-	wait_for_completion(&dct->drained);
-destroy:
-	if (need_cleanup)
-		destroy_resource_common(dev, &dct->mqp);
-	MLX5_SET(destroy_dct_in, in, opcode, MLX5_CMD_OP_DESTROY_DCT);
-	MLX5_SET(destroy_dct_in, in, dctn, qp->qpn);
-	MLX5_SET(destroy_dct_in, in, uid, qp->uid);
-	err = mlx5_cmd_exec(dev, (void *)&in, sizeof(in),
-			    (void *)&out, sizeof(out));
-	return err;
-}
-
-int mlx5_core_create_dct(struct mlx5_core_dev *dev,
-			 struct mlx5_core_dct *dct,
-			 u32 *in, int inlen,
-			 u32 *out, int outlen)
-{
-	struct mlx5_core_qp *qp = &dct->mqp;
-	int err;
-
-	init_completion(&dct->drained);
-	MLX5_SET(create_dct_in, in, opcode, MLX5_CMD_OP_CREATE_DCT);
-
-	err = mlx5_cmd_exec(dev, in, inlen, out, outlen);
-	if (err) {
-		mlx5_core_warn(dev, "create DCT failed, ret %d\n", err);
-		return err;
-	}
-
-	qp->qpn = MLX5_GET(create_dct_out, out, dctn);
-	qp->uid = MLX5_GET(create_dct_in, in, uid);
-	err = create_resource_common(dev, qp, MLX5_RES_DCT);
-	if (err)
-		goto err_cmd;
-
-	return 0;
-err_cmd:
-	_mlx5_core_destroy_dct(dev, dct, false);
-	return err;
-}
-EXPORT_SYMBOL_GPL(mlx5_core_create_dct);
-
-int mlx5_core_create_qp(struct mlx5_core_dev *dev,
-			struct mlx5_core_qp *qp,
-			u32 *in, int inlen)
-{
-	u32 out[MLX5_ST_SZ_DW(create_qp_out)] = {0};
-	u32 dout[MLX5_ST_SZ_DW(destroy_qp_out)];
-	u32 din[MLX5_ST_SZ_DW(destroy_qp_in)];
-	int err;
-
-	MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP);
-
-	err = mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
-	if (err)
-		return err;
-
-	qp->uid = MLX5_GET(create_qp_in, in, uid);
-	qp->qpn = MLX5_GET(create_qp_out, out, qpn);
-	mlx5_core_dbg(dev, "qpn = 0x%x\n", qp->qpn);
-
-	err = create_resource_common(dev, qp, MLX5_RES_QP);
-	if (err)
-		goto err_cmd;
-
-	err = mlx5_debug_qp_add(dev, qp);
-	if (err)
-		mlx5_core_dbg(dev, "failed adding QP 0x%x to debug file system\n",
-			      qp->qpn);
-
-	atomic_inc(&dev->num_qps);
-
-	return 0;
-
-err_cmd:
-	memset(din, 0, sizeof(din));
-	memset(dout, 0, sizeof(dout));
-	MLX5_SET(destroy_qp_in, din, opcode, MLX5_CMD_OP_DESTROY_QP);
-	MLX5_SET(destroy_qp_in, din, qpn, qp->qpn);
-	MLX5_SET(destroy_qp_in, din, uid, qp->uid);
-	mlx5_cmd_exec(dev, din, sizeof(din), dout, sizeof(dout));
-	return err;
-}
-EXPORT_SYMBOL_GPL(mlx5_core_create_qp);
-
-static int mlx5_core_drain_dct(struct mlx5_core_dev *dev,
-			       struct mlx5_core_dct *dct)
-{
-	u32 out[MLX5_ST_SZ_DW(drain_dct_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(drain_dct_in)]   = {0};
-	struct mlx5_core_qp *qp = &dct->mqp;
-
-	MLX5_SET(drain_dct_in, in, opcode, MLX5_CMD_OP_DRAIN_DCT);
-	MLX5_SET(drain_dct_in, in, dctn, qp->qpn);
-	MLX5_SET(drain_dct_in, in, uid, qp->uid);
-	return mlx5_cmd_exec(dev, (void *)&in, sizeof(in),
-			     (void *)&out, sizeof(out));
-}
-
-int mlx5_core_destroy_dct(struct mlx5_core_dev *dev,
-			  struct mlx5_core_dct *dct)
-{
-	return _mlx5_core_destroy_dct(dev, dct, true);
-}
-EXPORT_SYMBOL_GPL(mlx5_core_destroy_dct);
-
-int mlx5_core_destroy_qp(struct mlx5_core_dev *dev,
-			 struct mlx5_core_qp *qp)
-{
-	u32 out[MLX5_ST_SZ_DW(destroy_qp_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(destroy_qp_in)]   = {0};
-	int err;
-
-	mlx5_debug_qp_remove(dev, qp);
-
-	destroy_resource_common(dev, qp);
-
-	MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP);
-	MLX5_SET(destroy_qp_in, in, qpn, qp->qpn);
-	MLX5_SET(destroy_qp_in, in, uid, qp->uid);
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-	if (err)
-		return err;
-
-	atomic_dec(&dev->num_qps);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mlx5_core_destroy_qp);
-
-int mlx5_core_set_delay_drop(struct mlx5_core_dev *dev,
-			     u32 timeout_usec)
-{
-	u32 out[MLX5_ST_SZ_DW(set_delay_drop_params_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(set_delay_drop_params_in)]   = {0};
-
-	MLX5_SET(set_delay_drop_params_in, in, opcode,
-		 MLX5_CMD_OP_SET_DELAY_DROP_PARAMS);
-	MLX5_SET(set_delay_drop_params_in, in, delay_drop_timeout,
-		 timeout_usec / 100);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-}
-EXPORT_SYMBOL_GPL(mlx5_core_set_delay_drop);
-
-struct mbox_info {
-	u32 *in;
-	u32 *out;
-	int inlen;
-	int outlen;
-};
-
-static int mbox_alloc(struct mbox_info *mbox, int inlen, int outlen)
-{
-	mbox->inlen  = inlen;
-	mbox->outlen = outlen;
-	mbox->in = kzalloc(mbox->inlen, GFP_KERNEL);
-	mbox->out = kzalloc(mbox->outlen, GFP_KERNEL);
-	if (!mbox->in || !mbox->out) {
-		kfree(mbox->in);
-		kfree(mbox->out);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static void mbox_free(struct mbox_info *mbox)
-{
-	kfree(mbox->in);
-	kfree(mbox->out);
-}
-
-static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
-				u32 opt_param_mask, void *qpc,
-				struct mbox_info *mbox, u16 uid)
-{
-	mbox->out = NULL;
-	mbox->in = NULL;
-
-#define MBOX_ALLOC(mbox, typ)  \
-	mbox_alloc(mbox, MLX5_ST_SZ_BYTES(typ##_in), MLX5_ST_SZ_BYTES(typ##_out))
-
-#define MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid)                            \
-	do {                                                                   \
-		MLX5_SET(typ##_in, in, opcode, _opcode);                       \
-		MLX5_SET(typ##_in, in, qpn, _qpn);                             \
-		MLX5_SET(typ##_in, in, uid, _uid);                             \
-	} while (0)
-
-#define MOD_QP_IN_SET_QPC(typ, in, _opcode, _qpn, _opt_p, _qpc, _uid)          \
-	do {                                                                   \
-		MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid);                   \
-		MLX5_SET(typ##_in, in, opt_param_mask, _opt_p);                \
-		memcpy(MLX5_ADDR_OF(typ##_in, in, qpc), _qpc,                  \
-		       MLX5_ST_SZ_BYTES(qpc));                                 \
-	} while (0)
-
-	switch (opcode) {
-	/* 2RST & 2ERR */
-	case MLX5_CMD_OP_2RST_QP:
-		if (MBOX_ALLOC(mbox, qp_2rst))
-			return -ENOMEM;
-		MOD_QP_IN_SET(qp_2rst, mbox->in, opcode, qpn, uid);
-		break;
-	case MLX5_CMD_OP_2ERR_QP:
-		if (MBOX_ALLOC(mbox, qp_2err))
-			return -ENOMEM;
-		MOD_QP_IN_SET(qp_2err, mbox->in, opcode, qpn, uid);
-		break;
-
-	/* MODIFY with QPC */
-	case MLX5_CMD_OP_RST2INIT_QP:
-		if (MBOX_ALLOC(mbox, rst2init_qp))
-			return -ENOMEM;
-		MOD_QP_IN_SET_QPC(rst2init_qp, mbox->in, opcode, qpn,
-				  opt_param_mask, qpc, uid);
-		break;
-	case MLX5_CMD_OP_INIT2RTR_QP:
-		if (MBOX_ALLOC(mbox, init2rtr_qp))
-			return -ENOMEM;
-		MOD_QP_IN_SET_QPC(init2rtr_qp, mbox->in, opcode, qpn,
-				  opt_param_mask, qpc, uid);
-		break;
-	case MLX5_CMD_OP_RTR2RTS_QP:
-		if (MBOX_ALLOC(mbox, rtr2rts_qp))
-			return -ENOMEM;
-		MOD_QP_IN_SET_QPC(rtr2rts_qp, mbox->in, opcode, qpn,
-				  opt_param_mask, qpc, uid);
-		break;
-	case MLX5_CMD_OP_RTS2RTS_QP:
-		if (MBOX_ALLOC(mbox, rts2rts_qp))
-			return -ENOMEM;
-		MOD_QP_IN_SET_QPC(rts2rts_qp, mbox->in, opcode, qpn,
-				  opt_param_mask, qpc, uid);
-		break;
-	case MLX5_CMD_OP_SQERR2RTS_QP:
-		if (MBOX_ALLOC(mbox, sqerr2rts_qp))
-			return -ENOMEM;
-		MOD_QP_IN_SET_QPC(sqerr2rts_qp, mbox->in, opcode, qpn,
-				  opt_param_mask, qpc, uid);
-		break;
-	case MLX5_CMD_OP_INIT2INIT_QP:
-		if (MBOX_ALLOC(mbox, init2init_qp))
-			return -ENOMEM;
-		MOD_QP_IN_SET_QPC(init2init_qp, mbox->in, opcode, qpn,
-				  opt_param_mask, qpc, uid);
-		break;
-	default:
-		mlx5_core_err(dev, "Unknown transition for modify QP: OP(0x%x) QPN(0x%x)\n",
-			      opcode, qpn);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-int mlx5_core_qp_modify(struct mlx5_core_dev *dev, u16 opcode,
-			u32 opt_param_mask, void *qpc,
-			struct mlx5_core_qp *qp)
-{
-	struct mbox_info mbox;
-	int err;
-
-	err = modify_qp_mbox_alloc(dev, opcode, qp->qpn,
-				   opt_param_mask, qpc, &mbox, qp->uid);
-	if (err)
-		return err;
-
-	err = mlx5_cmd_exec(dev, mbox.in, mbox.inlen, mbox.out, mbox.outlen);
-	mbox_free(&mbox);
-	return err;
-}
-EXPORT_SYMBOL_GPL(mlx5_core_qp_modify);
-
-void mlx5_init_qp_table(struct mlx5_core_dev *dev)
-{
-	struct mlx5_qp_table *table = &dev->priv.qp_table;
-
-	memset(table, 0, sizeof(*table));
-	spin_lock_init(&table->lock);
-	INIT_RADIX_TREE(&table->tree, GFP_ATOMIC);
-	mlx5_qp_debugfs_init(dev);
-
-	table->nb.notifier_call = rsc_event_notifier;
-	mlx5_notifier_register(dev, &table->nb);
-}
-
-void mlx5_cleanup_qp_table(struct mlx5_core_dev *dev)
-{
-	struct mlx5_qp_table *table = &dev->priv.qp_table;
-
-	mlx5_notifier_unregister(dev, &table->nb);
-	mlx5_qp_debugfs_cleanup(dev);
-}
-
-int mlx5_core_qp_query(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp,
-		       u32 *out, int outlen)
-{
-	u32 in[MLX5_ST_SZ_DW(query_qp_in)] = {0};
-
-	MLX5_SET(query_qp_in, in, opcode, MLX5_CMD_OP_QUERY_QP);
-	MLX5_SET(query_qp_in, in, qpn, qp->qpn);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
-}
-EXPORT_SYMBOL_GPL(mlx5_core_qp_query);
-
-int mlx5_core_dct_query(struct mlx5_core_dev *dev, struct mlx5_core_dct *dct,
-			u32 *out, int outlen)
-{
-	u32 in[MLX5_ST_SZ_DW(query_dct_in)] = {0};
-	struct mlx5_core_qp *qp = &dct->mqp;
-
-	MLX5_SET(query_dct_in, in, opcode, MLX5_CMD_OP_QUERY_DCT);
-	MLX5_SET(query_dct_in, in, dctn, qp->qpn);
-
-	return mlx5_cmd_exec(dev, (void *)&in, sizeof(in),
-			     (void *)out, outlen);
-}
-EXPORT_SYMBOL_GPL(mlx5_core_dct_query);
-
-int mlx5_core_xrcd_alloc(struct mlx5_core_dev *dev, u32 *xrcdn)
-{
-	u32 out[MLX5_ST_SZ_DW(alloc_xrcd_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(alloc_xrcd_in)]   = {0};
-	int err;
-
-	MLX5_SET(alloc_xrcd_in, in, opcode, MLX5_CMD_OP_ALLOC_XRCD);
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-	if (!err)
-		*xrcdn = MLX5_GET(alloc_xrcd_out, out, xrcd);
-	return err;
-}
-EXPORT_SYMBOL_GPL(mlx5_core_xrcd_alloc);
-
-int mlx5_core_xrcd_dealloc(struct mlx5_core_dev *dev, u32 xrcdn)
-{
-	u32 out[MLX5_ST_SZ_DW(dealloc_xrcd_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(dealloc_xrcd_in)]   = {0};
-
-	MLX5_SET(dealloc_xrcd_in, in, opcode, MLX5_CMD_OP_DEALLOC_XRCD);
-	MLX5_SET(dealloc_xrcd_in, in, xrcd, xrcdn);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-}
-EXPORT_SYMBOL_GPL(mlx5_core_xrcd_dealloc);
-
-static void destroy_rq_tracked(struct mlx5_core_dev *dev, u32 rqn, u16 uid)
-{
-	u32 in[MLX5_ST_SZ_DW(destroy_rq_in)]   = {};
-	u32 out[MLX5_ST_SZ_DW(destroy_rq_out)] = {};
-
-	MLX5_SET(destroy_rq_in, in, opcode, MLX5_CMD_OP_DESTROY_RQ);
-	MLX5_SET(destroy_rq_in, in, rqn, rqn);
-	MLX5_SET(destroy_rq_in, in, uid, uid);
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-}
-
-int mlx5_core_create_rq_tracked(struct mlx5_core_dev *dev, u32 *in, int inlen,
-				struct mlx5_core_qp *rq)
-{
-	int err;
-	u32 rqn;
-
-	err = mlx5_core_create_rq(dev, in, inlen, &rqn);
-	if (err)
-		return err;
-
-	rq->uid = MLX5_GET(create_rq_in, in, uid);
-	rq->qpn = rqn;
-	err = create_resource_common(dev, rq, MLX5_RES_RQ);
-	if (err)
-		goto err_destroy_rq;
-
-	return 0;
-
-err_destroy_rq:
-	destroy_rq_tracked(dev, rq->qpn, rq->uid);
-
-	return err;
-}
-EXPORT_SYMBOL(mlx5_core_create_rq_tracked);
-
-void mlx5_core_destroy_rq_tracked(struct mlx5_core_dev *dev,
-				  struct mlx5_core_qp *rq)
-{
-	destroy_resource_common(dev, rq);
-	destroy_rq_tracked(dev, rq->qpn, rq->uid);
-}
-EXPORT_SYMBOL(mlx5_core_destroy_rq_tracked);
-
-static void destroy_sq_tracked(struct mlx5_core_dev *dev, u32 sqn, u16 uid)
-{
-	u32 in[MLX5_ST_SZ_DW(destroy_sq_in)]   = {};
-	u32 out[MLX5_ST_SZ_DW(destroy_sq_out)] = {};
-
-	MLX5_SET(destroy_sq_in, in, opcode, MLX5_CMD_OP_DESTROY_SQ);
-	MLX5_SET(destroy_sq_in, in, sqn, sqn);
-	MLX5_SET(destroy_sq_in, in, uid, uid);
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-}
-
-int mlx5_core_create_sq_tracked(struct mlx5_core_dev *dev, u32 *in, int inlen,
-				struct mlx5_core_qp *sq)
-{
-	int err;
-	u32 sqn;
-
-	err = mlx5_core_create_sq(dev, in, inlen, &sqn);
-	if (err)
-		return err;
-
-	sq->uid = MLX5_GET(create_sq_in, in, uid);
-	sq->qpn = sqn;
-	err = create_resource_common(dev, sq, MLX5_RES_SQ);
-	if (err)
-		goto err_destroy_sq;
-
-	return 0;
-
-err_destroy_sq:
-	destroy_sq_tracked(dev, sq->qpn, sq->uid);
-
-	return err;
-}
-EXPORT_SYMBOL(mlx5_core_create_sq_tracked);
-
-void mlx5_core_destroy_sq_tracked(struct mlx5_core_dev *dev,
-				  struct mlx5_core_qp *sq)
-{
-	destroy_resource_common(dev, sq);
-	destroy_sq_tracked(dev, sq->qpn, sq->uid);
-}
-EXPORT_SYMBOL(mlx5_core_destroy_sq_tracked);
-
-int mlx5_core_alloc_q_counter(struct mlx5_core_dev *dev, u16 *counter_id)
-{
-	u32 in[MLX5_ST_SZ_DW(alloc_q_counter_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(alloc_q_counter_out)] = {0};
-	int err;
-
-	MLX5_SET(alloc_q_counter_in, in, opcode, MLX5_CMD_OP_ALLOC_Q_COUNTER);
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-	if (!err)
-		*counter_id = MLX5_GET(alloc_q_counter_out, out,
-				       counter_set_id);
-	return err;
-}
-EXPORT_SYMBOL_GPL(mlx5_core_alloc_q_counter);
-
-int mlx5_core_dealloc_q_counter(struct mlx5_core_dev *dev, u16 counter_id)
-{
-	u32 in[MLX5_ST_SZ_DW(dealloc_q_counter_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(dealloc_q_counter_out)] = {0};
-
-	MLX5_SET(dealloc_q_counter_in, in, opcode,
-		 MLX5_CMD_OP_DEALLOC_Q_COUNTER);
-	MLX5_SET(dealloc_q_counter_in, in, counter_set_id, counter_id);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
-}
-EXPORT_SYMBOL_GPL(mlx5_core_dealloc_q_counter);
-
-int mlx5_core_query_q_counter(struct mlx5_core_dev *dev, u16 counter_id,
-			      int reset, void *out, int out_size)
-{
-	u32 in[MLX5_ST_SZ_DW(query_q_counter_in)] = {0};
-
-	MLX5_SET(query_q_counter_in, in, opcode, MLX5_CMD_OP_QUERY_Q_COUNTER);
-	MLX5_SET(query_q_counter_in, in, clear, reset);
-	MLX5_SET(query_q_counter_in, in, counter_set_id, counter_id);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, out_size);
-}
-EXPORT_SYMBOL_GPL(mlx5_core_query_q_counter);
-
-struct mlx5_core_rsc_common *mlx5_core_res_hold(struct mlx5_core_dev *dev,
-						int res_num,
-						enum mlx5_res_type res_type)
-{
-	u32 rsn = res_num | (res_type << MLX5_USER_INDEX_LEN);
-	struct mlx5_qp_table *table = &dev->priv.qp_table;
-
-	return mlx5_get_rsc(table, rsn);
-}
-EXPORT_SYMBOL_GPL(mlx5_core_res_hold);
-
-void mlx5_core_res_put(struct mlx5_core_rsc_common *res)
-{
-	mlx5_core_put_rsc(res);
-}
-EXPORT_SYMBOL_GPL(mlx5_core_res_put);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/rl.c b/drivers/net/ethernet/mellanox/mlx5/core/rl.c
index f3b29d9ade1f..99039c47ef33 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/rl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/rl.c
@@ -33,15 +33,14 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include "mlx5_core.h"
 
 /* Scheduling element fw management */
 int mlx5_create_scheduling_element_cmd(struct mlx5_core_dev *dev, u8 hierarchy,
 				       void *ctx, u32 *element_id)
 {
-	u32 in[MLX5_ST_SZ_DW(create_scheduling_element_in)]  = {0};
-	u32 out[MLX5_ST_SZ_DW(create_scheduling_element_in)] = {0};
+	u32 out[MLX5_ST_SZ_DW(create_scheduling_element_in)] = {};
+	u32 in[MLX5_ST_SZ_DW(create_scheduling_element_in)] = {};
 	void *schedc;
 	int err;
 
@@ -53,7 +52,7 @@ int mlx5_create_scheduling_element_cmd(struct mlx5_core_dev *dev, u8 hierarchy,
 		 hierarchy);
 	memcpy(schedc, ctx, MLX5_ST_SZ_BYTES(scheduling_context));
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, create_scheduling_element, in, out);
 	if (err)
 		return err;
 
@@ -66,8 +65,7 @@ int mlx5_modify_scheduling_element_cmd(struct mlx5_core_dev *dev, u8 hierarchy,
 				       void *ctx, u32 element_id,
 				       u32 modify_bitmask)
 {
-	u32 in[MLX5_ST_SZ_DW(modify_scheduling_element_in)]  = {0};
-	u32 out[MLX5_ST_SZ_DW(modify_scheduling_element_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(modify_scheduling_element_in)] = {};
 	void *schedc;
 
 	schedc = MLX5_ADDR_OF(modify_scheduling_element_in, in,
@@ -82,14 +80,13 @@ int mlx5_modify_scheduling_element_cmd(struct mlx5_core_dev *dev, u8 hierarchy,
 		 hierarchy);
 	memcpy(schedc, ctx, MLX5_ST_SZ_BYTES(scheduling_context));
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, modify_scheduling_element, in);
 }
 
 int mlx5_destroy_scheduling_element_cmd(struct mlx5_core_dev *dev, u8 hierarchy,
 					u32 element_id)
 {
-	u32 in[MLX5_ST_SZ_DW(destroy_scheduling_element_in)]  = {0};
-	u32 out[MLX5_ST_SZ_DW(destroy_scheduling_element_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_scheduling_element_in)] = {};
 
 	MLX5_SET(destroy_scheduling_element_in, in, opcode,
 		 MLX5_CMD_OP_DESTROY_SCHEDULING_ELEMENT);
@@ -98,7 +95,7 @@ int mlx5_destroy_scheduling_element_cmd(struct mlx5_core_dev *dev, u8 hierarchy,
 	MLX5_SET(destroy_scheduling_element_in, in, scheduling_hierarchy,
 		 hierarchy);
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, destroy_scheduling_element, in);
 }
 
 static bool mlx5_rl_are_equal_raw(struct mlx5_rl_entry *entry, void *rl_in,
@@ -145,8 +142,7 @@ static struct mlx5_rl_entry *find_rl_entry(struct mlx5_rl_table *table,
 static int mlx5_set_pp_rate_limit_cmd(struct mlx5_core_dev *dev,
 				      struct mlx5_rl_entry *entry, bool set)
 {
-	u32 in[MLX5_ST_SZ_DW(set_pp_rate_limit_in)]   = {};
-	u32 out[MLX5_ST_SZ_DW(set_pp_rate_limit_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(set_pp_rate_limit_in)] = {};
 	void *pp_context;
 
 	pp_context = MLX5_ADDR_OF(set_pp_rate_limit_in, in, ctx);
@@ -156,7 +152,7 @@ static int mlx5_set_pp_rate_limit_cmd(struct mlx5_core_dev *dev,
 	MLX5_SET(set_pp_rate_limit_in, in, rate_limit_index, entry->index);
 	if (set)
 		memcpy(pp_context, entry->rl_raw, sizeof(entry->rl_raw));
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, set_pp_rate_limit, in);
 }
 
 bool mlx5_rl_is_in_range(struct mlx5_core_dev *dev, u32 rate)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_cmd.c
index 461b39376daf..6bd34b293007 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_cmd.c
@@ -18,7 +18,7 @@ int mlx5dr_cmd_query_esw_vport_context(struct mlx5_core_dev *mdev,
 	MLX5_SET(query_esw_vport_context_in, in, other_vport, other_vport);
 	MLX5_SET(query_esw_vport_context_in, in, vport_number, vport_number);
 
-	err = mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(mdev, query_esw_vport_context, in, out);
 	if (err)
 		return err;
 
@@ -51,7 +51,7 @@ int mlx5dr_cmd_query_gvmi(struct mlx5_core_dev *mdev, bool other_vport,
 		 MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE << 1 |
 		 HCA_CAP_OPMOD_GET_CUR);
 
-	err = mlx5_cmd_exec(mdev, in, sizeof(in), out, out_size);
+	err = mlx5_cmd_exec_inout(mdev, query_hca_cap, in, out);
 	if (err) {
 		kfree(out);
 		return err;
@@ -141,7 +141,7 @@ int mlx5dr_cmd_query_flow_table(struct mlx5_core_dev *dev,
 	MLX5_SET(query_flow_table_in, in, table_type, type);
 	MLX5_SET(query_flow_table_in, in, table_id, table_id);
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, query_flow_table, in, out);
 	if (err)
 		return err;
 
@@ -158,12 +158,11 @@ int mlx5dr_cmd_query_flow_table(struct mlx5_core_dev *dev,
 
 int mlx5dr_cmd_sync_steering(struct mlx5_core_dev *mdev)
 {
-	u32 out[MLX5_ST_SZ_DW(sync_steering_out)] = {};
 	u32 in[MLX5_ST_SZ_DW(sync_steering_in)] = {};
 
 	MLX5_SET(sync_steering_in, in, opcode, MLX5_CMD_OP_SYNC_STEERING);
 
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(mdev, sync_steering, in);
 }
 
 int mlx5dr_cmd_set_fte_modify_and_vport(struct mlx5_core_dev *mdev,
@@ -214,14 +213,13 @@ int mlx5dr_cmd_del_flow_table_entry(struct mlx5_core_dev *mdev,
 				    u32 table_type,
 				    u32 table_id)
 {
-	u32 out[MLX5_ST_SZ_DW(delete_fte_out)] = {};
 	u32 in[MLX5_ST_SZ_DW(delete_fte_in)] = {};
 
 	MLX5_SET(delete_fte_in, in, opcode, MLX5_CMD_OP_DELETE_FLOW_TABLE_ENTRY);
 	MLX5_SET(delete_fte_in, in, table_type, table_type);
 	MLX5_SET(delete_fte_in, in, table_id, table_id);
 
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(mdev, delete_fte, in);
 }
 
 int mlx5dr_cmd_alloc_modify_header(struct mlx5_core_dev *mdev,
@@ -263,7 +261,6 @@ int mlx5dr_cmd_alloc_modify_header(struct mlx5_core_dev *mdev,
 int mlx5dr_cmd_dealloc_modify_header(struct mlx5_core_dev *mdev,
 				     u32 modify_header_id)
 {
-	u32 out[MLX5_ST_SZ_DW(dealloc_modify_header_context_out)] = {};
 	u32 in[MLX5_ST_SZ_DW(dealloc_modify_header_context_in)] = {};
 
 	MLX5_SET(dealloc_modify_header_context_in, in, opcode,
@@ -271,7 +268,7 @@ int mlx5dr_cmd_dealloc_modify_header(struct mlx5_core_dev *mdev,
 	MLX5_SET(dealloc_modify_header_context_in, in, modify_header_id,
 		 modify_header_id);
 
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(mdev, dealloc_modify_header_context, in);
 }
 
 int mlx5dr_cmd_create_empty_flow_group(struct mlx5_core_dev *mdev,
@@ -292,7 +289,7 @@ int mlx5dr_cmd_create_empty_flow_group(struct mlx5_core_dev *mdev,
 	MLX5_SET(create_flow_group_in, in, table_type, table_type);
 	MLX5_SET(create_flow_group_in, in, table_id, table_id);
 
-	err = mlx5_cmd_exec(mdev, in, inlen, out, sizeof(out));
+	err = mlx5_cmd_exec_inout(mdev, create_flow_group, in, out);
 	if (err)
 		goto out;
 
@@ -309,14 +306,14 @@ int mlx5dr_cmd_destroy_flow_group(struct mlx5_core_dev *mdev,
 				  u32 group_id)
 {
 	u32 in[MLX5_ST_SZ_DW(destroy_flow_group_in)] = {};
-	u32 out[MLX5_ST_SZ_DW(destroy_flow_group_out)] = {};
 
-	MLX5_SET(create_flow_group_in, in, opcode, MLX5_CMD_OP_DESTROY_FLOW_GROUP);
+	MLX5_SET(destroy_flow_group_in, in, opcode,
+		 MLX5_CMD_OP_DESTROY_FLOW_GROUP);
 	MLX5_SET(destroy_flow_group_in, in, table_type, table_type);
 	MLX5_SET(destroy_flow_group_in, in, table_id, table_id);
 	MLX5_SET(destroy_flow_group_in, in, group_id, group_id);
 
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(mdev, destroy_flow_group, in);
 }
 
 int mlx5dr_cmd_create_flow_table(struct mlx5_core_dev *mdev,
@@ -360,7 +357,7 @@ int mlx5dr_cmd_create_flow_table(struct mlx5_core_dev *mdev,
 	MLX5_SET(create_flow_table_in, in, flow_table_context.reformat_en,
 		 attr->reformat_en);
 
-	err = mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(mdev, create_flow_table, in, out);
 	if (err)
 		return err;
 
@@ -379,7 +376,6 @@ int mlx5dr_cmd_destroy_flow_table(struct mlx5_core_dev *mdev,
 				  u32 table_id,
 				  u32 table_type)
 {
-	u32 out[MLX5_ST_SZ_DW(destroy_flow_table_out)] = {};
 	u32 in[MLX5_ST_SZ_DW(destroy_flow_table_in)] = {};
 
 	MLX5_SET(destroy_flow_table_in, in, opcode,
@@ -387,7 +383,7 @@ int mlx5dr_cmd_destroy_flow_table(struct mlx5_core_dev *mdev,
 	MLX5_SET(destroy_flow_table_in, in, table_type, table_type);
 	MLX5_SET(destroy_flow_table_in, in, table_id, table_id);
 
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(mdev, destroy_flow_table, in);
 }
 
 int mlx5dr_cmd_create_reformat_ctx(struct mlx5_core_dev *mdev,
@@ -434,7 +430,6 @@ int mlx5dr_cmd_create_reformat_ctx(struct mlx5_core_dev *mdev,
 void mlx5dr_cmd_destroy_reformat_ctx(struct mlx5_core_dev *mdev,
 				     u32 reformat_id)
 {
-	u32 out[MLX5_ST_SZ_DW(dealloc_packet_reformat_context_out)] = {};
 	u32 in[MLX5_ST_SZ_DW(dealloc_packet_reformat_context_in)] = {};
 
 	MLX5_SET(dealloc_packet_reformat_context_in, in, opcode,
@@ -442,7 +437,7 @@ void mlx5dr_cmd_destroy_reformat_ctx(struct mlx5_core_dev *mdev,
 	MLX5_SET(dealloc_packet_reformat_context_in, in, packet_reformat_id,
 		 reformat_id);
 
-	mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(mdev, dealloc_packet_reformat_context, in);
 }
 
 int mlx5dr_cmd_query_gid(struct mlx5_core_dev *mdev, u8 vhca_port_num,
@@ -458,7 +453,7 @@ int mlx5dr_cmd_query_gid(struct mlx5_core_dev *mdev, u8 vhca_port_num,
 	MLX5_SET(query_roce_address_in, in, roce_address_index, index);
 	MLX5_SET(query_roce_address_in, in, vhca_port_num, vhca_port_num);
 
-	err = mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(mdev, query_roce_address, in, out);
 	if (err)
 		return err;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c
index 30d2d7376f56..cc33515b9aba 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c
@@ -95,13 +95,12 @@ static int dr_icm_create_dm_mkey(struct mlx5_core_dev *mdev,
 }
 
 static struct mlx5dr_icm_mr *
-dr_icm_pool_mr_create(struct mlx5dr_icm_pool *pool,
-		      enum mlx5_sw_icm_type type,
-		      size_t align_base)
+dr_icm_pool_mr_create(struct mlx5dr_icm_pool *pool)
 {
 	struct mlx5_core_dev *mdev = pool->dmn->mdev;
+	enum mlx5_sw_icm_type dm_type;
 	struct mlx5dr_icm_mr *icm_mr;
-	size_t align_diff;
+	size_t log_align_base;
 	int err;
 
 	icm_mr = kvzalloc(sizeof(*icm_mr), GFP_KERNEL);
@@ -111,14 +110,22 @@ dr_icm_pool_mr_create(struct mlx5dr_icm_pool *pool,
 	icm_mr->pool = pool;
 	INIT_LIST_HEAD(&icm_mr->mr_list);
 
-	icm_mr->dm.type = type;
-
-	/* 2^log_biggest_table * entry-size * double-for-alignment */
 	icm_mr->dm.length = mlx5dr_icm_pool_chunk_size_to_byte(pool->max_log_chunk_sz,
-							       pool->icm_type) * 2;
+							       pool->icm_type);
+
+	if (pool->icm_type == DR_ICM_TYPE_STE) {
+		dm_type = MLX5_SW_ICM_TYPE_STEERING;
+		log_align_base = ilog2(icm_mr->dm.length);
+	} else {
+		dm_type = MLX5_SW_ICM_TYPE_HEADER_MODIFY;
+		/* Align base is 64B */
+		log_align_base = ilog2(DR_ICM_MODIFY_HDR_ALIGN_BASE);
+	}
+	icm_mr->dm.type = dm_type;
 
-	err = mlx5_dm_sw_icm_alloc(mdev, icm_mr->dm.type, icm_mr->dm.length, 0,
-				   &icm_mr->dm.addr, &icm_mr->dm.obj_id);
+	err = mlx5_dm_sw_icm_alloc(mdev, icm_mr->dm.type, icm_mr->dm.length,
+				   log_align_base, 0, &icm_mr->dm.addr,
+				   &icm_mr->dm.obj_id);
 	if (err) {
 		mlx5dr_err(pool->dmn, "Failed to allocate SW ICM memory, err (%d)\n", err);
 		goto free_icm_mr;
@@ -137,15 +144,18 @@ dr_icm_pool_mr_create(struct mlx5dr_icm_pool *pool,
 
 	icm_mr->icm_start_addr = icm_mr->dm.addr;
 
-	/* align_base is always a power of 2 */
-	align_diff = icm_mr->icm_start_addr & (align_base - 1);
-	if (align_diff)
-		icm_mr->used_length = align_base - align_diff;
+	if (icm_mr->icm_start_addr & (BIT(log_align_base) - 1)) {
+		mlx5dr_err(pool->dmn, "Failed to get Aligned ICM mem (asked: %zu)\n",
+			   log_align_base);
+		goto free_mkey;
+	}
 
 	list_add_tail(&icm_mr->mr_list, &pool->icm_mr_list);
 
 	return icm_mr;
 
+free_mkey:
+	mlx5_core_destroy_mkey(mdev, &icm_mr->mkey);
 free_dm:
 	mlx5_dm_sw_icm_dealloc(mdev, icm_mr->dm.type, icm_mr->dm.length, 0,
 			       icm_mr->dm.addr, icm_mr->dm.obj_id);
@@ -200,24 +210,11 @@ static int dr_icm_chunks_create(struct mlx5dr_icm_bucket *bucket)
 	struct mlx5dr_icm_pool *pool = bucket->pool;
 	struct mlx5dr_icm_mr *icm_mr = NULL;
 	struct mlx5dr_icm_chunk *chunk;
-	enum mlx5_sw_icm_type dm_type;
-	size_t align_base;
 	int i, err = 0;
 
 	mr_req_size = bucket->num_of_entries * bucket->entry_size;
 	mr_row_size = mlx5dr_icm_pool_chunk_size_to_byte(pool->max_log_chunk_sz,
 							 pool->icm_type);
-
-	if (pool->icm_type == DR_ICM_TYPE_STE) {
-		dm_type = MLX5_SW_ICM_TYPE_STEERING;
-		/* Align base is the biggest chunk size / row size */
-		align_base = mr_row_size;
-	} else {
-		dm_type = MLX5_SW_ICM_TYPE_HEADER_MODIFY;
-		/* Align base is 64B */
-		align_base = DR_ICM_MODIFY_HDR_ALIGN_BASE;
-	}
-
 	mutex_lock(&pool->mr_mutex);
 	if (!list_empty(&pool->icm_mr_list)) {
 		icm_mr = list_last_entry(&pool->icm_mr_list,
@@ -228,7 +225,7 @@ static int dr_icm_chunks_create(struct mlx5dr_icm_bucket *bucket)
 	}
 
 	if (!icm_mr || mr_free_size < mr_row_size) {
-		icm_mr = dr_icm_pool_mr_create(pool, dm_type, align_base);
+		icm_mr = dr_icm_pool_mr_create(pool);
 		if (!icm_mr) {
 			err = -ENOMEM;
 			goto out_err;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
index c0ab9cf74929..c4ed25bb9ac8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
@@ -100,14 +100,10 @@ static int dr_poll_cq(struct mlx5dr_cq *dr_cq, int ne)
 	return err == CQ_POLL_ERR ? err : npolled;
 }
 
-static void dr_qp_event(struct mlx5_core_qp *mqp, int event)
-{
-	pr_info("DR QP event %u on QP #%u\n", event, mqp->qpn);
-}
-
 static struct mlx5dr_qp *dr_create_rc_qp(struct mlx5_core_dev *mdev,
 					 struct dr_qp_init_attr *attr)
 {
+	u32 out[MLX5_ST_SZ_DW(create_qp_out)] = {};
 	u32 temp_qpc[MLX5_ST_SZ_DW(qpc)] = {};
 	struct mlx5_wq_param wqp;
 	struct mlx5dr_qp *dr_qp;
@@ -180,14 +176,12 @@ static struct mlx5dr_qp *dr_create_rc_qp(struct mlx5_core_dev *mdev,
 				  (__be64 *)MLX5_ADDR_OF(create_qp_in,
 							 in, pas));
 
-	err = mlx5_core_create_qp(mdev, &dr_qp->mqp, in, inlen);
+	MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP);
+	err = mlx5_cmd_exec(mdev, in, inlen, out, sizeof(out));
+	dr_qp->qpn = MLX5_GET(create_qp_out, out, qpn);
 	kfree(in);
-
-	if (err) {
-		mlx5_core_warn(mdev, " Can't create QP\n");
+	if (err)
 		goto err_in;
-	}
-	dr_qp->mqp.event = dr_qp_event;
 	dr_qp->uar = attr->uar;
 
 	return dr_qp;
@@ -204,7 +198,12 @@ static struct mlx5dr_qp *dr_create_rc_qp(struct mlx5_core_dev *mdev,
 static void dr_destroy_qp(struct mlx5_core_dev *mdev,
 			  struct mlx5dr_qp *dr_qp)
 {
-	mlx5_core_destroy_qp(mdev, &dr_qp->mqp);
+	u32 in[MLX5_ST_SZ_DW(destroy_qp_in)] = {};
+
+	MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP);
+	MLX5_SET(destroy_qp_in, in, qpn, dr_qp->qpn);
+	mlx5_cmd_exec_in(mdev, destroy_qp, in);
+
 	kfree(dr_qp->sq.wqe_head);
 	mlx5_wq_destroy(&dr_qp->wq_ctrl);
 	kfree(dr_qp);
@@ -242,7 +241,7 @@ static void dr_rdma_segments(struct mlx5dr_qp *dr_qp, u64 remote_addr,
 		MLX5_WQE_CTRL_CQ_UPDATE : 0;
 	wq_ctrl->opmod_idx_opcode = cpu_to_be32(((dr_qp->sq.pc & 0xffff) << 8) |
 						opcode);
-	wq_ctrl->qpn_ds = cpu_to_be32(size | dr_qp->mqp.qpn << 8);
+	wq_ctrl->qpn_ds = cpu_to_be32(size | dr_qp->qpn << 8);
 	wq_raddr = (void *)(wq_ctrl + 1);
 	wq_raddr->raddr = cpu_to_be64(remote_addr);
 	wq_raddr->rkey = cpu_to_be32(rkey);
@@ -585,8 +584,10 @@ static int dr_modify_qp_rst2init(struct mlx5_core_dev *mdev,
 	MLX5_SET(qpc, qpc, rre, 1);
 	MLX5_SET(qpc, qpc, rwe, 1);
 
-	return mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RST2INIT_QP, 0, qpc,
-				   &dr_qp->mqp);
+	MLX5_SET(rst2init_qp_in, in, opcode, MLX5_CMD_OP_RST2INIT_QP);
+	MLX5_SET(rst2init_qp_in, in, qpn, dr_qp->qpn);
+
+	return mlx5_cmd_exec_in(mdev, rst2init_qp, in);
 }
 
 static int dr_cmd_modify_qp_rtr2rts(struct mlx5_core_dev *mdev,
@@ -598,14 +599,15 @@ static int dr_cmd_modify_qp_rtr2rts(struct mlx5_core_dev *mdev,
 
 	qpc  = MLX5_ADDR_OF(rtr2rts_qp_in, in, qpc);
 
-	MLX5_SET(rtr2rts_qp_in, in, qpn, dr_qp->mqp.qpn);
+	MLX5_SET(rtr2rts_qp_in, in, qpn, dr_qp->qpn);
 
-	MLX5_SET(qpc, qpc, log_ack_req_freq, 0);
 	MLX5_SET(qpc, qpc, retry_count, attr->retry_cnt);
 	MLX5_SET(qpc, qpc, rnr_retry, attr->rnr_retry);
 
-	return mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RTR2RTS_QP, 0, qpc,
-				   &dr_qp->mqp);
+	MLX5_SET(rtr2rts_qp_in, in, opcode, MLX5_CMD_OP_RTR2RTS_QP);
+	MLX5_SET(rtr2rts_qp_in, in, qpn, dr_qp->qpn);
+
+	return mlx5_cmd_exec_in(mdev, rtr2rts_qp, in);
 }
 
 static int dr_cmd_modify_qp_init2rtr(struct mlx5_core_dev *mdev,
@@ -617,7 +619,7 @@ static int dr_cmd_modify_qp_init2rtr(struct mlx5_core_dev *mdev,
 
 	qpc = MLX5_ADDR_OF(init2rtr_qp_in, in, qpc);
 
-	MLX5_SET(init2rtr_qp_in, in, qpn, dr_qp->mqp.qpn);
+	MLX5_SET(init2rtr_qp_in, in, qpn, dr_qp->qpn);
 
 	MLX5_SET(qpc, qpc, mtu, attr->mtu);
 	MLX5_SET(qpc, qpc, log_msg_max, DR_CHUNK_SIZE_MAX - 1);
@@ -636,8 +638,10 @@ static int dr_cmd_modify_qp_init2rtr(struct mlx5_core_dev *mdev,
 	MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, attr->port_num);
 	MLX5_SET(qpc, qpc, min_rnr_nak, 1);
 
-	return mlx5_core_qp_modify(mdev, MLX5_CMD_OP_INIT2RTR_QP, 0, qpc,
-				   &dr_qp->mqp);
+	MLX5_SET(init2rtr_qp_in, in, opcode, MLX5_CMD_OP_INIT2RTR_QP);
+	MLX5_SET(init2rtr_qp_in, in, qpn, dr_qp->qpn);
+
+	return mlx5_cmd_exec_in(mdev, init2rtr_qp, in);
 }
 
 static int dr_prepare_qp_to_rts(struct mlx5dr_domain *dmn)
@@ -663,7 +667,7 @@ static int dr_prepare_qp_to_rts(struct mlx5dr_domain *dmn)
 		return ret;
 
 	rtr_attr.mtu		= mtu;
-	rtr_attr.qp_num		= dr_qp->mqp.qpn;
+	rtr_attr.qp_num		= dr_qp->qpn;
 	rtr_attr.min_rnr_timer	= 12;
 	rtr_attr.port_num	= port;
 	rtr_attr.sgid_index	= gid_index;
@@ -689,12 +693,6 @@ static int dr_prepare_qp_to_rts(struct mlx5dr_domain *dmn)
 	return 0;
 }
 
-static void dr_cq_event(struct mlx5_core_cq *mcq,
-			enum mlx5_event event)
-{
-	pr_info("CQ event %u on CQ #%u\n", event, mcq->cqn);
-}
-
 static struct mlx5dr_cq *dr_create_cq(struct mlx5_core_dev *mdev,
 				      struct mlx5_uars_page *uar,
 				      size_t ncqe)
@@ -755,8 +753,6 @@ static struct mlx5dr_cq *dr_create_cq(struct mlx5_core_dev *mdev,
 	pas = (__be64 *)MLX5_ADDR_OF(create_cq_in, in, pas);
 	mlx5_fill_page_frag_array(&cq->wq_ctrl.buf, pas);
 
-	cq->mcq.event = dr_cq_event;
-
 	err = mlx5_core_create_cq(mdev, &cq->mcq, in, inlen, out, sizeof(out));
 	kvfree(in);
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
index 3fa739951b34..984783238baa 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
@@ -990,7 +990,7 @@ struct mlx5dr_qp {
 	struct mlx5_wq_qp wq;
 	struct mlx5_uars_page *uar;
 	struct mlx5_wq_ctrl wq_ctrl;
-	struct mlx5_core_qp mqp;
+	u32 qpn;
 	struct {
 		unsigned int pc;
 		unsigned int cc;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c
index 3b3f5b9d4f95..8887b2440c7d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c
@@ -576,7 +576,7 @@ static int mlx5_cmd_dr_modify_header_alloc(struct mlx5_flow_root_namespace *ns,
 	struct mlx5dr_action *action;
 	size_t actions_sz;
 
-	actions_sz = MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto) *
+	actions_sz = MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto) *
 		num_actions;
 	action = mlx5dr_action_create_modify_header(dr_domain, 0,
 						    actions_sz,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/transobj.c b/drivers/net/ethernet/mellanox/mlx5/core/transobj.c
index b1068500f1df..01cc00ad8acf 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/transobj.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/transobj.c
@@ -36,14 +36,14 @@
 
 int mlx5_core_alloc_transport_domain(struct mlx5_core_dev *dev, u32 *tdn)
 {
-	u32 in[MLX5_ST_SZ_DW(alloc_transport_domain_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(alloc_transport_domain_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(alloc_transport_domain_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(alloc_transport_domain_in)] = {};
 	int err;
 
 	MLX5_SET(alloc_transport_domain_in, in, opcode,
 		 MLX5_CMD_OP_ALLOC_TRANSPORT_DOMAIN);
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, alloc_transport_domain, in, out);
 	if (!err)
 		*tdn = MLX5_GET(alloc_transport_domain_out, out,
 				transport_domain);
@@ -54,19 +54,18 @@ EXPORT_SYMBOL(mlx5_core_alloc_transport_domain);
 
 void mlx5_core_dealloc_transport_domain(struct mlx5_core_dev *dev, u32 tdn)
 {
-	u32 in[MLX5_ST_SZ_DW(dealloc_transport_domain_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(dealloc_transport_domain_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(dealloc_transport_domain_in)] = {};
 
 	MLX5_SET(dealloc_transport_domain_in, in, opcode,
 		 MLX5_CMD_OP_DEALLOC_TRANSPORT_DOMAIN);
 	MLX5_SET(dealloc_transport_domain_in, in, transport_domain, tdn);
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(dev, dealloc_transport_domain, in);
 }
 EXPORT_SYMBOL(mlx5_core_dealloc_transport_domain);
 
 int mlx5_core_create_rq(struct mlx5_core_dev *dev, u32 *in, int inlen, u32 *rqn)
 {
-	u32 out[MLX5_ST_SZ_DW(create_rq_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(create_rq_out)] = {};
 	int err;
 
 	MLX5_SET(create_rq_in, in, opcode, MLX5_CMD_OP_CREATE_RQ);
@@ -78,44 +77,39 @@ int mlx5_core_create_rq(struct mlx5_core_dev *dev, u32 *in, int inlen, u32 *rqn)
 }
 EXPORT_SYMBOL(mlx5_core_create_rq);
 
-int mlx5_core_modify_rq(struct mlx5_core_dev *dev, u32 rqn, u32 *in, int inlen)
+int mlx5_core_modify_rq(struct mlx5_core_dev *dev, u32 rqn, u32 *in)
 {
-	u32 out[MLX5_ST_SZ_DW(modify_rq_out)];
-
 	MLX5_SET(modify_rq_in, in, rqn, rqn);
 	MLX5_SET(modify_rq_in, in, opcode, MLX5_CMD_OP_MODIFY_RQ);
 
-	memset(out, 0, sizeof(out));
-	return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, modify_rq, in);
 }
 EXPORT_SYMBOL(mlx5_core_modify_rq);
 
 void mlx5_core_destroy_rq(struct mlx5_core_dev *dev, u32 rqn)
 {
-	u32 in[MLX5_ST_SZ_DW(destroy_rq_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(destroy_rq_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_rq_in)] = {};
 
 	MLX5_SET(destroy_rq_in, in, opcode, MLX5_CMD_OP_DESTROY_RQ);
 	MLX5_SET(destroy_rq_in, in, rqn, rqn);
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(dev, destroy_rq, in);
 }
 EXPORT_SYMBOL(mlx5_core_destroy_rq);
 
 int mlx5_core_query_rq(struct mlx5_core_dev *dev, u32 rqn, u32 *out)
 {
-	u32 in[MLX5_ST_SZ_DW(query_rq_in)] = {0};
-	int outlen = MLX5_ST_SZ_BYTES(query_rq_out);
+	u32 in[MLX5_ST_SZ_DW(query_rq_in)] = {};
 
 	MLX5_SET(query_rq_in, in, opcode, MLX5_CMD_OP_QUERY_RQ);
 	MLX5_SET(query_rq_in, in, rqn, rqn);
 
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
+	return mlx5_cmd_exec_inout(dev, query_rq, in, out);
 }
 EXPORT_SYMBOL(mlx5_core_query_rq);
 
 int mlx5_core_create_sq(struct mlx5_core_dev *dev, u32 *in, int inlen, u32 *sqn)
 {
-	u32 out[MLX5_ST_SZ_DW(create_sq_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(create_sq_out)] = {};
 	int err;
 
 	MLX5_SET(create_sq_in, in, opcode, MLX5_CMD_OP_CREATE_SQ);
@@ -126,34 +120,30 @@ int mlx5_core_create_sq(struct mlx5_core_dev *dev, u32 *in, int inlen, u32 *sqn)
 	return err;
 }
 
-int mlx5_core_modify_sq(struct mlx5_core_dev *dev, u32 sqn, u32 *in, int inlen)
+int mlx5_core_modify_sq(struct mlx5_core_dev *dev, u32 sqn, u32 *in)
 {
-	u32 out[MLX5_ST_SZ_DW(modify_sq_out)] = {0};
-
 	MLX5_SET(modify_sq_in, in, sqn, sqn);
 	MLX5_SET(modify_sq_in, in, opcode, MLX5_CMD_OP_MODIFY_SQ);
-	return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, modify_sq, in);
 }
 EXPORT_SYMBOL(mlx5_core_modify_sq);
 
 void mlx5_core_destroy_sq(struct mlx5_core_dev *dev, u32 sqn)
 {
-	u32 in[MLX5_ST_SZ_DW(destroy_sq_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(destroy_sq_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_sq_in)] = {};
 
 	MLX5_SET(destroy_sq_in, in, opcode, MLX5_CMD_OP_DESTROY_SQ);
 	MLX5_SET(destroy_sq_in, in, sqn, sqn);
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(dev, destroy_sq, in);
 }
 
 int mlx5_core_query_sq(struct mlx5_core_dev *dev, u32 sqn, u32 *out)
 {
-	u32 in[MLX5_ST_SZ_DW(query_sq_in)] = {0};
-	int outlen = MLX5_ST_SZ_BYTES(query_sq_out);
+	u32 in[MLX5_ST_SZ_DW(query_sq_in)] = {};
 
 	MLX5_SET(query_sq_in, in, opcode, MLX5_CMD_OP_QUERY_SQ);
 	MLX5_SET(query_sq_in, in, sqn, sqn);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
+	return mlx5_cmd_exec_inout(dev, query_sq, in, out);
 }
 EXPORT_SYMBOL(mlx5_core_query_sq);
 
@@ -182,24 +172,13 @@ int mlx5_core_query_sq_state(struct mlx5_core_dev *dev, u32 sqn, u8 *state)
 }
 EXPORT_SYMBOL_GPL(mlx5_core_query_sq_state);
 
-int mlx5_core_create_tir_out(struct mlx5_core_dev *dev,
-			     u32 *in, int inlen,
-			     u32 *out, int outlen)
-{
-	MLX5_SET(create_tir_in, in, opcode, MLX5_CMD_OP_CREATE_TIR);
-
-	return mlx5_cmd_exec(dev, in, inlen, out, outlen);
-}
-EXPORT_SYMBOL(mlx5_core_create_tir_out);
-
-int mlx5_core_create_tir(struct mlx5_core_dev *dev, u32 *in, int inlen,
-			 u32 *tirn)
+int mlx5_core_create_tir(struct mlx5_core_dev *dev, u32 *in, u32 *tirn)
 {
 	u32 out[MLX5_ST_SZ_DW(create_tir_out)] = {};
 	int err;
 
-	err = mlx5_core_create_tir_out(dev, in, inlen,
-				       out, sizeof(out));
+	MLX5_SET(create_tir_in, in, opcode, MLX5_CMD_OP_CREATE_TIR);
+	err = mlx5_cmd_exec_inout(dev, create_tir, in, out);
 	if (!err)
 		*tirn = MLX5_GET(create_tir_out, out, tirn);
 
@@ -207,35 +186,30 @@ int mlx5_core_create_tir(struct mlx5_core_dev *dev, u32 *in, int inlen,
 }
 EXPORT_SYMBOL(mlx5_core_create_tir);
 
-int mlx5_core_modify_tir(struct mlx5_core_dev *dev, u32 tirn, u32 *in,
-			 int inlen)
+int mlx5_core_modify_tir(struct mlx5_core_dev *dev, u32 tirn, u32 *in)
 {
-	u32 out[MLX5_ST_SZ_DW(modify_tir_out)] = {0};
-
 	MLX5_SET(modify_tir_in, in, tirn, tirn);
 	MLX5_SET(modify_tir_in, in, opcode, MLX5_CMD_OP_MODIFY_TIR);
-	return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, modify_tir, in);
 }
 
 void mlx5_core_destroy_tir(struct mlx5_core_dev *dev, u32 tirn)
 {
-	u32 in[MLX5_ST_SZ_DW(destroy_tir_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(destroy_tir_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_tir_in)] = {};
 
 	MLX5_SET(destroy_tir_in, in, opcode, MLX5_CMD_OP_DESTROY_TIR);
 	MLX5_SET(destroy_tir_in, in, tirn, tirn);
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(dev, destroy_tir, in);
 }
 EXPORT_SYMBOL(mlx5_core_destroy_tir);
 
-int mlx5_core_create_tis(struct mlx5_core_dev *dev, u32 *in, int inlen,
-			 u32 *tisn)
+int mlx5_core_create_tis(struct mlx5_core_dev *dev, u32 *in, u32 *tisn)
 {
-	u32 out[MLX5_ST_SZ_DW(create_tis_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(create_tis_out)] = {};
 	int err;
 
 	MLX5_SET(create_tis_in, in, opcode, MLX5_CMD_OP_CREATE_TIS);
-	err = mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, create_tis, in, out);
 	if (!err)
 		*tisn = MLX5_GET(create_tis_out, out, tisn);
 
@@ -243,33 +217,29 @@ int mlx5_core_create_tis(struct mlx5_core_dev *dev, u32 *in, int inlen,
 }
 EXPORT_SYMBOL(mlx5_core_create_tis);
 
-int mlx5_core_modify_tis(struct mlx5_core_dev *dev, u32 tisn, u32 *in,
-			 int inlen)
+int mlx5_core_modify_tis(struct mlx5_core_dev *dev, u32 tisn, u32 *in)
 {
-	u32 out[MLX5_ST_SZ_DW(modify_tis_out)] = {0};
-
 	MLX5_SET(modify_tis_in, in, tisn, tisn);
 	MLX5_SET(modify_tis_in, in, opcode, MLX5_CMD_OP_MODIFY_TIS);
 
-	return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, modify_tis, in);
 }
 EXPORT_SYMBOL(mlx5_core_modify_tis);
 
 void mlx5_core_destroy_tis(struct mlx5_core_dev *dev, u32 tisn)
 {
-	u32 in[MLX5_ST_SZ_DW(destroy_tis_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(destroy_tis_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_tis_in)] = {};
 
 	MLX5_SET(destroy_tis_in, in, opcode, MLX5_CMD_OP_DESTROY_TIS);
 	MLX5_SET(destroy_tis_in, in, tisn, tisn);
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(dev, destroy_tis, in);
 }
 EXPORT_SYMBOL(mlx5_core_destroy_tis);
 
 int mlx5_core_create_rqt(struct mlx5_core_dev *dev, u32 *in, int inlen,
 			 u32 *rqtn)
 {
-	u32 out[MLX5_ST_SZ_DW(create_rqt_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(create_rqt_out)] = {};
 	int err;
 
 	MLX5_SET(create_rqt_in, in, opcode, MLX5_CMD_OP_CREATE_RQT);
@@ -284,7 +254,7 @@ EXPORT_SYMBOL(mlx5_core_create_rqt);
 int mlx5_core_modify_rqt(struct mlx5_core_dev *dev, u32 rqtn, u32 *in,
 			 int inlen)
 {
-	u32 out[MLX5_ST_SZ_DW(modify_rqt_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(modify_rqt_out)] = {};
 
 	MLX5_SET(modify_rqt_in, in, rqtn, rqtn);
 	MLX5_SET(modify_rqt_in, in, opcode, MLX5_CMD_OP_MODIFY_RQT);
@@ -293,12 +263,11 @@ int mlx5_core_modify_rqt(struct mlx5_core_dev *dev, u32 rqtn, u32 *in,
 
 void mlx5_core_destroy_rqt(struct mlx5_core_dev *dev, u32 rqtn)
 {
-	u32 in[MLX5_ST_SZ_DW(destroy_rqt_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(destroy_rqt_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(destroy_rqt_in)] = {};
 
 	MLX5_SET(destroy_rqt_in, in, opcode, MLX5_CMD_OP_DESTROY_RQT);
 	MLX5_SET(destroy_rqt_in, in, rqtn, rqtn);
-	mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	mlx5_cmd_exec_in(dev, destroy_rqt, in);
 }
 EXPORT_SYMBOL(mlx5_core_destroy_rqt);
 
@@ -383,7 +352,7 @@ static int mlx5_hairpin_modify_rq(struct mlx5_core_dev *func_mdev, u32 rqn,
 				  int curr_state, int next_state,
 				  u16 peer_vhca, u32 peer_sq)
 {
-	u32 in[MLX5_ST_SZ_DW(modify_rq_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(modify_rq_in)] = {};
 	void *rqc;
 
 	rqc = MLX5_ADDR_OF(modify_rq_in, in, ctx);
@@ -396,8 +365,7 @@ static int mlx5_hairpin_modify_rq(struct mlx5_core_dev *func_mdev, u32 rqn,
 	MLX5_SET(modify_rq_in, in, rq_state, curr_state);
 	MLX5_SET(rqc, rqc, state, next_state);
 
-	return mlx5_core_modify_rq(func_mdev, rqn,
-				   in, MLX5_ST_SZ_BYTES(modify_rq_in));
+	return mlx5_core_modify_rq(func_mdev, rqn, in);
 }
 
 static int mlx5_hairpin_modify_sq(struct mlx5_core_dev *peer_mdev, u32 sqn,
@@ -417,8 +385,7 @@ static int mlx5_hairpin_modify_sq(struct mlx5_core_dev *peer_mdev, u32 sqn,
 	MLX5_SET(modify_sq_in, in, sq_state, curr_state);
 	MLX5_SET(sqc, sqc, state, next_state);
 
-	return mlx5_core_modify_sq(peer_mdev, sqn,
-				   in, MLX5_ST_SZ_BYTES(modify_sq_in));
+	return mlx5_core_modify_sq(peer_mdev, sqn, in);
 }
 
 static int mlx5_hairpin_pair_queues(struct mlx5_hairpin *hp)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/uar.c b/drivers/net/ethernet/mellanox/mlx5/core/uar.c
index 0d006224d7b0..da481a7c12f4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/uar.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/uar.c
@@ -34,17 +34,16 @@
 #include <linux/module.h>
 #include <linux/io-mapping.h>
 #include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
 #include "mlx5_core.h"
 
 int mlx5_cmd_alloc_uar(struct mlx5_core_dev *dev, u32 *uarn)
 {
-	u32 out[MLX5_ST_SZ_DW(alloc_uar_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(alloc_uar_in)]   = {0};
+	u32 out[MLX5_ST_SZ_DW(alloc_uar_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(alloc_uar_in)] = {};
 	int err;
 
 	MLX5_SET(alloc_uar_in, in, opcode, MLX5_CMD_OP_ALLOC_UAR);
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(dev, alloc_uar, in, out);
 	if (!err)
 		*uarn = MLX5_GET(alloc_uar_out, out, uar);
 	return err;
@@ -53,12 +52,11 @@ EXPORT_SYMBOL(mlx5_cmd_alloc_uar);
 
 int mlx5_cmd_free_uar(struct mlx5_core_dev *dev, u32 uarn)
 {
-	u32 out[MLX5_ST_SZ_DW(dealloc_uar_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(dealloc_uar_in)]   = {0};
+	u32 in[MLX5_ST_SZ_DW(dealloc_uar_in)] = {};
 
 	MLX5_SET(dealloc_uar_in, in, opcode, MLX5_CMD_OP_DEALLOC_UAR);
 	MLX5_SET(dealloc_uar_in, in, uar, uarn);
-	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(dev, dealloc_uar, in);
 }
 EXPORT_SYMBOL(mlx5_cmd_free_uar);
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c
index 23f879da9104..c107d92dc118 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c
@@ -40,10 +40,11 @@
 /* Mutex to hold while enabling or disabling RoCE */
 static DEFINE_MUTEX(mlx5_roce_en_lock);
 
-static int _mlx5_query_vport_state(struct mlx5_core_dev *mdev, u8 opmod,
-				   u16 vport, u32 *out, int outlen)
+u8 mlx5_query_vport_state(struct mlx5_core_dev *mdev, u8 opmod, u16 vport)
 {
-	u32 in[MLX5_ST_SZ_DW(query_vport_state_in)] = {0};
+	u32 out[MLX5_ST_SZ_DW(query_vport_state_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_vport_state_in)] = {};
+	int err;
 
 	MLX5_SET(query_vport_state_in, in, opcode,
 		 MLX5_CMD_OP_QUERY_VPORT_STATE);
@@ -52,14 +53,9 @@ static int _mlx5_query_vport_state(struct mlx5_core_dev *mdev, u8 opmod,
 	if (vport)
 		MLX5_SET(query_vport_state_in, in, other_vport, 1);
 
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, outlen);
-}
-
-u8 mlx5_query_vport_state(struct mlx5_core_dev *mdev, u8 opmod, u16 vport)
-{
-	u32 out[MLX5_ST_SZ_DW(query_vport_state_out)] = {0};
-
-	_mlx5_query_vport_state(mdev, opmod, vport, out, sizeof(out));
+	err = mlx5_cmd_exec_inout(mdev, query_vport_state, in, out);
+	if (err)
+		return 0;
 
 	return MLX5_GET(query_vport_state_out, out, state);
 }
@@ -67,8 +63,7 @@ u8 mlx5_query_vport_state(struct mlx5_core_dev *mdev, u8 opmod, u16 vport)
 int mlx5_modify_vport_admin_state(struct mlx5_core_dev *mdev, u8 opmod,
 				  u16 vport, u8 other_vport, u8 state)
 {
-	u32 in[MLX5_ST_SZ_DW(modify_vport_state_in)]   = {0};
-	u32 out[MLX5_ST_SZ_DW(modify_vport_state_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(modify_vport_state_in)] = {};
 
 	MLX5_SET(modify_vport_state_in, in, opcode,
 		 MLX5_CMD_OP_MODIFY_VPORT_STATE);
@@ -77,13 +72,13 @@ int mlx5_modify_vport_admin_state(struct mlx5_core_dev *mdev, u8 opmod,
 	MLX5_SET(modify_vport_state_in, in, other_vport, other_vport);
 	MLX5_SET(modify_vport_state_in, in, admin_state, state);
 
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	return mlx5_cmd_exec_in(mdev, modify_vport_state, in);
 }
 
 static int mlx5_query_nic_vport_context(struct mlx5_core_dev *mdev, u16 vport,
-					u32 *out, int outlen)
+					u32 *out)
 {
-	u32 in[MLX5_ST_SZ_DW(query_nic_vport_context_in)] = {0};
+	u32 in[MLX5_ST_SZ_DW(query_nic_vport_context_in)] = {};
 
 	MLX5_SET(query_nic_vport_context_in, in, opcode,
 		 MLX5_CMD_OP_QUERY_NIC_VPORT_CONTEXT);
@@ -91,26 +86,16 @@ static int mlx5_query_nic_vport_context(struct mlx5_core_dev *mdev, u16 vport,
 	if (vport)
 		MLX5_SET(query_nic_vport_context_in, in, other_vport, 1);
 
-	return mlx5_cmd_exec(mdev, in, sizeof(in), out, outlen);
-}
-
-static int mlx5_modify_nic_vport_context(struct mlx5_core_dev *mdev, void *in,
-					 int inlen)
-{
-	u32 out[MLX5_ST_SZ_DW(modify_nic_vport_context_out)] = {0};
-
-	MLX5_SET(modify_nic_vport_context_in, in, opcode,
-		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
-	return mlx5_cmd_exec(mdev, in, inlen, out, sizeof(out));
+	return mlx5_cmd_exec_inout(mdev, query_nic_vport_context, in, out);
 }
 
 int mlx5_query_nic_vport_min_inline(struct mlx5_core_dev *mdev,
 				    u16 vport, u8 *min_inline)
 {
-	u32 out[MLX5_ST_SZ_DW(query_nic_vport_context_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(query_nic_vport_context_out)] = {};
 	int err;
 
-	err = mlx5_query_nic_vport_context(mdev, vport, out, sizeof(out));
+	err = mlx5_query_nic_vport_context(mdev, vport, out);
 	if (!err)
 		*min_inline = MLX5_GET(query_nic_vport_context_out, out,
 				       nic_vport_context.min_wqe_inline_mode);
@@ -139,8 +124,7 @@ EXPORT_SYMBOL_GPL(mlx5_query_min_inline);
 int mlx5_modify_nic_vport_min_inline(struct mlx5_core_dev *mdev,
 				     u16 vport, u8 min_inline)
 {
-	u32 in[MLX5_ST_SZ_DW(modify_nic_vport_context_in)] = {0};
-	int inlen = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in);
+	u32 in[MLX5_ST_SZ_DW(modify_nic_vport_context_in)] = {};
 	void *nic_vport_ctx;
 
 	MLX5_SET(modify_nic_vport_context_in, in,
@@ -152,23 +136,20 @@ int mlx5_modify_nic_vport_min_inline(struct mlx5_core_dev *mdev,
 				     in, nic_vport_context);
 	MLX5_SET(nic_vport_context, nic_vport_ctx,
 		 min_wqe_inline_mode, min_inline);
+	MLX5_SET(modify_nic_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 
-	return mlx5_modify_nic_vport_context(mdev, in, inlen);
+	return mlx5_cmd_exec_in(mdev, modify_nic_vport_context, in);
 }
 
 int mlx5_query_nic_vport_mac_address(struct mlx5_core_dev *mdev,
 				     u16 vport, bool other, u8 *addr)
 {
-	int outlen = MLX5_ST_SZ_BYTES(query_nic_vport_context_out);
+	u32 out[MLX5_ST_SZ_DW(query_nic_vport_context_out)] = {};
 	u32 in[MLX5_ST_SZ_DW(query_nic_vport_context_in)] = {};
 	u8 *out_addr;
-	u32 *out;
 	int err;
 
-	out = kvzalloc(outlen, GFP_KERNEL);
-	if (!out)
-		return -ENOMEM;
-
 	out_addr = MLX5_ADDR_OF(query_nic_vport_context_out, out,
 				nic_vport_context.permanent_address);
 
@@ -177,11 +158,10 @@ int mlx5_query_nic_vport_mac_address(struct mlx5_core_dev *mdev,
 	MLX5_SET(query_nic_vport_context_in, in, vport_number, vport);
 	MLX5_SET(query_nic_vport_context_in, in, other_vport, other);
 
-	err = mlx5_cmd_exec(mdev, in, sizeof(in), out, outlen);
+	err = mlx5_cmd_exec_inout(mdev, query_nic_vport_context, in, out);
 	if (!err)
 		ether_addr_copy(addr, &out_addr[2]);
 
-	kvfree(out);
 	return err;
 }
 EXPORT_SYMBOL_GPL(mlx5_query_nic_vport_mac_address);
@@ -216,8 +196,10 @@ int mlx5_modify_nic_vport_mac_address(struct mlx5_core_dev *mdev,
 				permanent_address);
 
 	ether_addr_copy(&perm_mac[2], addr);
+	MLX5_SET(modify_nic_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 
-	err = mlx5_modify_nic_vport_context(mdev, in, inlen);
+	err = mlx5_cmd_exec_in(mdev, modify_nic_vport_context, in);
 
 	kvfree(in);
 
@@ -235,7 +217,7 @@ int mlx5_query_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 *mtu)
 	if (!out)
 		return -ENOMEM;
 
-	err = mlx5_query_nic_vport_context(mdev, 0, out, outlen);
+	err = mlx5_query_nic_vport_context(mdev, 0, out);
 	if (!err)
 		*mtu = MLX5_GET(query_nic_vport_context_out, out,
 				nic_vport_context.mtu);
@@ -257,8 +239,10 @@ int mlx5_modify_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 mtu)
 
 	MLX5_SET(modify_nic_vport_context_in, in, field_select.mtu, 1);
 	MLX5_SET(modify_nic_vport_context_in, in, nic_vport_context.mtu, mtu);
+	MLX5_SET(modify_nic_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 
-	err = mlx5_modify_nic_vport_context(mdev, in, inlen);
+	err = mlx5_cmd_exec_in(mdev, modify_nic_vport_context, in);
 
 	kvfree(in);
 	return err;
@@ -292,7 +276,7 @@ int mlx5_query_nic_vport_mac_list(struct mlx5_core_dev *dev,
 		req_list_size = max_list_size;
 	}
 
-	out_sz = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in) +
+	out_sz = MLX5_ST_SZ_BYTES(query_nic_vport_context_in) +
 			req_list_size * MLX5_ST_SZ_BYTES(mac_address_layout);
 
 	out = kzalloc(out_sz, GFP_KERNEL);
@@ -332,7 +316,7 @@ int mlx5_modify_nic_vport_mac_list(struct mlx5_core_dev *dev,
 				   u8 addr_list[][ETH_ALEN],
 				   int list_size)
 {
-	u32 out[MLX5_ST_SZ_DW(modify_nic_vport_context_out)];
+	u32 out[MLX5_ST_SZ_DW(modify_nic_vport_context_out)] = {};
 	void *nic_vport_ctx;
 	int max_list_size;
 	int in_sz;
@@ -350,7 +334,6 @@ int mlx5_modify_nic_vport_mac_list(struct mlx5_core_dev *dev,
 	in_sz = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in) +
 		list_size * MLX5_ST_SZ_BYTES(mac_address_layout);
 
-	memset(out, 0, sizeof(out));
 	in = kzalloc(in_sz, GFP_KERNEL);
 	if (!in)
 		return -ENOMEM;
@@ -442,7 +425,7 @@ int mlx5_query_nic_vport_system_image_guid(struct mlx5_core_dev *mdev,
 	if (!out)
 		return -ENOMEM;
 
-	mlx5_query_nic_vport_context(mdev, 0, out, outlen);
+	mlx5_query_nic_vport_context(mdev, 0, out);
 
 	*system_image_guid = MLX5_GET64(query_nic_vport_context_out, out,
 					nic_vport_context.system_image_guid);
@@ -462,7 +445,7 @@ int mlx5_query_nic_vport_node_guid(struct mlx5_core_dev *mdev, u64 *node_guid)
 	if (!out)
 		return -ENOMEM;
 
-	mlx5_query_nic_vport_context(mdev, 0, out, outlen);
+	mlx5_query_nic_vport_context(mdev, 0, out);
 
 	*node_guid = MLX5_GET64(query_nic_vport_context_out, out,
 				nic_vport_context.node_guid);
@@ -498,8 +481,10 @@ int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev,
 	nic_vport_context = MLX5_ADDR_OF(modify_nic_vport_context_in,
 					 in, nic_vport_context);
 	MLX5_SET64(nic_vport_context, nic_vport_context, node_guid, node_guid);
+	MLX5_SET(modify_nic_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 
-	err = mlx5_modify_nic_vport_context(mdev, in, inlen);
+	err = mlx5_cmd_exec_in(mdev, modify_nic_vport_context, in);
 
 	kvfree(in);
 
@@ -516,7 +501,7 @@ int mlx5_query_nic_vport_qkey_viol_cntr(struct mlx5_core_dev *mdev,
 	if (!out)
 		return -ENOMEM;
 
-	mlx5_query_nic_vport_context(mdev, 0, out, outlen);
+	mlx5_query_nic_vport_context(mdev, 0, out);
 
 	*qkey_viol_cntr = MLX5_GET(query_nic_vport_context_out, out,
 				   nic_vport_context.qkey_violation_counter);
@@ -664,7 +649,7 @@ int mlx5_query_hca_vport_context(struct mlx5_core_dev *dev,
 				 struct mlx5_hca_vport_context *rep)
 {
 	int out_sz = MLX5_ST_SZ_BYTES(query_hca_vport_context_out);
-	int in[MLX5_ST_SZ_DW(query_hca_vport_context_in)] = {0};
+	int in[MLX5_ST_SZ_DW(query_hca_vport_context_in)] = {};
 	int is_group_manager;
 	void *out;
 	void *ctx;
@@ -691,7 +676,7 @@ int mlx5_query_hca_vport_context(struct mlx5_core_dev *dev,
 	if (MLX5_CAP_GEN(dev, num_ports) == 2)
 		MLX5_SET(query_hca_vport_context_in, in, port_num, port_num);
 
-	err = mlx5_cmd_exec(dev, in, sizeof(in), out,  out_sz);
+	err = mlx5_cmd_exec_inout(dev, query_hca_vport_context, in, out);
 	if (err)
 		goto ex;
 
@@ -788,7 +773,7 @@ int mlx5_query_nic_vport_promisc(struct mlx5_core_dev *mdev,
 	if (!out)
 		return -ENOMEM;
 
-	err = mlx5_query_nic_vport_context(mdev, vport, out, outlen);
+	err = mlx5_query_nic_vport_context(mdev, vport, out);
 	if (err)
 		goto out;
 
@@ -825,8 +810,10 @@ int mlx5_modify_nic_vport_promisc(struct mlx5_core_dev *mdev,
 		 nic_vport_context.promisc_mc, promisc_mc);
 	MLX5_SET(modify_nic_vport_context_in, in,
 		 nic_vport_context.promisc_all, promisc_all);
+	MLX5_SET(modify_nic_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 
-	err = mlx5_modify_nic_vport_context(mdev, in, inlen);
+	err = mlx5_cmd_exec_in(mdev, modify_nic_vport_context, in);
 
 	kvfree(in);
 
@@ -865,8 +852,10 @@ int mlx5_nic_vport_update_local_lb(struct mlx5_core_dev *mdev, bool enable)
 	if (MLX5_CAP_GEN(mdev, disable_local_lb_uc))
 		MLX5_SET(modify_nic_vport_context_in, in,
 			 field_select.disable_uc_local_lb, 1);
+	MLX5_SET(modify_nic_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 
-	err = mlx5_modify_nic_vport_context(mdev, in, inlen);
+	err = mlx5_cmd_exec_in(mdev, modify_nic_vport_context, in);
 
 	if (!err)
 		mlx5_core_dbg(mdev, "%s local_lb\n",
@@ -888,7 +877,7 @@ int mlx5_nic_vport_query_local_lb(struct mlx5_core_dev *mdev, bool *status)
 	if (!out)
 		return -ENOMEM;
 
-	err = mlx5_query_nic_vport_context(mdev, 0, out, outlen);
+	err = mlx5_query_nic_vport_context(mdev, 0, out);
 	if (err)
 		goto out;
 
@@ -925,8 +914,10 @@ static int mlx5_nic_vport_update_roce_state(struct mlx5_core_dev *mdev,
 	MLX5_SET(modify_nic_vport_context_in, in, field_select.roce_en, 1);
 	MLX5_SET(modify_nic_vport_context_in, in, nic_vport_context.roce_en,
 		 state);
+	MLX5_SET(modify_nic_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 
-	err = mlx5_modify_nic_vport_context(mdev, in, inlen);
+	err = mlx5_cmd_exec_in(mdev, modify_nic_vport_context, in);
 
 	kvfree(in);
 
@@ -965,16 +956,15 @@ int mlx5_nic_vport_disable_roce(struct mlx5_core_dev *mdev)
 	mutex_unlock(&mlx5_roce_en_lock);
 	return err;
 }
-EXPORT_SYMBOL_GPL(mlx5_nic_vport_disable_roce);
+EXPORT_SYMBOL(mlx5_nic_vport_disable_roce);
 
 int mlx5_core_query_vport_counter(struct mlx5_core_dev *dev, u8 other_vport,
-				  int vf, u8 port_num, void *out,
-				  size_t out_sz)
+				  int vf, u8 port_num, void *out)
 {
-	int	in_sz = MLX5_ST_SZ_BYTES(query_vport_counter_in);
-	int	is_group_manager;
-	void   *in;
-	int	err;
+	int in_sz = MLX5_ST_SZ_BYTES(query_vport_counter_in);
+	int is_group_manager;
+	void *in;
+	int err;
 
 	is_group_manager = MLX5_CAP_GEN(dev, vport_group_manager);
 	in = kvzalloc(in_sz, GFP_KERNEL);
@@ -997,7 +987,7 @@ int mlx5_core_query_vport_counter(struct mlx5_core_dev *dev, u8 other_vport,
 	if (MLX5_CAP_GEN(dev, num_ports) == 2)
 		MLX5_SET(query_vport_counter_in, in, port_num, port_num);
 
-	err = mlx5_cmd_exec(dev, in, in_sz, out,  out_sz);
+	err = mlx5_cmd_exec_inout(dev, query_vport_counter, in, out);
 free:
 	kvfree(in);
 	return err;
@@ -1008,8 +998,8 @@ int mlx5_query_vport_down_stats(struct mlx5_core_dev *mdev, u16 vport,
 				u8 other_vport, u64 *rx_discard_vport_down,
 				u64 *tx_discard_vport_down)
 {
-	u32 out[MLX5_ST_SZ_DW(query_vnic_env_out)] = {0};
-	u32 in[MLX5_ST_SZ_DW(query_vnic_env_in)] = {0};
+	u32 out[MLX5_ST_SZ_DW(query_vnic_env_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_vnic_env_in)] = {};
 	int err;
 
 	MLX5_SET(query_vnic_env_in, in, opcode,
@@ -1018,7 +1008,7 @@ int mlx5_query_vport_down_stats(struct mlx5_core_dev *mdev, u16 vport,
 	MLX5_SET(query_vnic_env_in, in, vport_number, vport);
 	MLX5_SET(query_vnic_env_in, in, other_vport, other_vport);
 
-	err = mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+	err = mlx5_cmd_exec_inout(mdev, query_vnic_env, in, out);
 	if (err)
 		return err;
 
@@ -1035,11 +1025,10 @@ int mlx5_core_modify_hca_vport_context(struct mlx5_core_dev *dev,
 				       struct mlx5_hca_vport_context *req)
 {
 	int in_sz = MLX5_ST_SZ_BYTES(modify_hca_vport_context_in);
-	u8 out[MLX5_ST_SZ_BYTES(modify_hca_vport_context_out)];
 	int is_group_manager;
+	void *ctx;
 	void *in;
 	int err;
-	void *ctx;
 
 	mlx5_core_dbg(dev, "vf %d\n", vf);
 	is_group_manager = MLX5_CAP_GEN(dev, vport_group_manager);
@@ -1047,7 +1036,6 @@ int mlx5_core_modify_hca_vport_context(struct mlx5_core_dev *dev,
 	if (!in)
 		return -ENOMEM;
 
-	memset(out, 0, sizeof(out));
 	MLX5_SET(modify_hca_vport_context_in, in, opcode, MLX5_CMD_OP_MODIFY_HCA_VPORT_CONTEXT);
 	if (other_vport) {
 		if (is_group_manager) {
@@ -1074,7 +1062,7 @@ int mlx5_core_modify_hca_vport_context(struct mlx5_core_dev *dev,
 	MLX5_SET(hca_vport_context, ctx, cap_mask1, req->cap_mask1);
 	MLX5_SET(hca_vport_context, ctx, cap_mask1_field_select,
 		 req->cap_mask1_perm);
-	err = mlx5_cmd_exec(dev, in, in_sz, out, sizeof(out));
+	err = mlx5_cmd_exec_in(dev, modify_hca_vport_context, in);
 ex:
 	kfree(in);
 	return err;
@@ -1103,8 +1091,10 @@ int mlx5_nic_vport_affiliate_multiport(struct mlx5_core_dev *master_mdev,
 	MLX5_SET(modify_nic_vport_context_in, in,
 		 nic_vport_context.affiliation_criteria,
 		 MLX5_CAP_GEN(port_mdev, affiliate_nic_vport_criteria));
+	MLX5_SET(modify_nic_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 
-	err = mlx5_modify_nic_vport_context(port_mdev, in, inlen);
+	err = mlx5_cmd_exec_in(port_mdev, modify_nic_vport_context, in);
 	if (err)
 		mlx5_nic_vport_disable_roce(port_mdev);
 
@@ -1129,8 +1119,10 @@ int mlx5_nic_vport_unaffiliate_multiport(struct mlx5_core_dev *port_mdev)
 		 nic_vport_context.affiliated_vhca_id, 0);
 	MLX5_SET(modify_nic_vport_context_in, in,
 		 nic_vport_context.affiliation_criteria, 0);
+	MLX5_SET(modify_nic_vport_context_in, in, opcode,
+		 MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 
-	err = mlx5_modify_nic_vport_context(port_mdev, in, inlen);
+	err = mlx5_cmd_exec_in(port_mdev, modify_nic_vport_context, in);
 	if (!err)
 		mlx5_nic_vport_disable_roce(port_mdev);
 
@@ -1170,4 +1162,4 @@ u16 mlx5_eswitch_get_total_vports(const struct mlx5_core_dev *dev)
 {
 	return MLX5_SPECIAL_VPORTS(dev) + mlx5_core_max_vfs(dev);
 }
-EXPORT_SYMBOL(mlx5_eswitch_get_total_vports);
+EXPORT_SYMBOL_GPL(mlx5_eswitch_get_total_vports);
diff --git a/drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c b/drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c
index 046a0cb82ed8..7a04c626a2aa 100644
--- a/drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c
+++ b/drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c
@@ -76,7 +76,7 @@ static int mlxfw_fsm_state_err(struct mlxfw_dev *mlxfw_dev,
 	case MLXFW_FSM_STATE_ERR_MAX:
 		MLXFW_ERR_MSG(mlxfw_dev, extack, "unknown error", err);
 		break;
-	};
+	}
 
 	return mlxfw_fsm_state_errno[fsm_state_err];
 };
@@ -159,7 +159,7 @@ mlxfw_fsm_reactivate_err(struct mlxfw_dev *mlxfw_dev,
 	case MLXFW_FSM_REACTIVATE_STATUS_MAX:
 		MLXFW_REACT_ERR("unexpected error", err);
 		break;
-	};
+	}
 	return -EREMOTEIO;
 };
 
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Makefile b/drivers/net/ethernet/mellanox/mlxsw/Makefile
index 0e86a581d45b..4aeabb35c943 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Makefile
+++ b/drivers/net/ethernet/mellanox/mlxsw/Makefile
@@ -21,6 +21,7 @@ mlxsw_spectrum-objs		:= spectrum.o spectrum_buffers.o \
 				   spectrum_acl_atcam.o spectrum_acl_erp.o \
 				   spectrum1_acl_tcam.o spectrum2_acl_tcam.o \
 				   spectrum_acl_bloom_filter.o spectrum_acl.o \
+				   spectrum_flow.o spectrum_matchall.o \
 				   spectrum_flower.o spectrum_cnt.o \
 				   spectrum_fid.o spectrum_ipip.o \
 				   spectrum_acl_flex_actions.o \
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 9b39b8e70519..3c3db1c874b6 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -3203,7 +3203,7 @@ MLXSW_ITEM32_INDEXED(reg, iedr, rec_type, MLXSW_REG_IEDR_BASE_LEN, 24, 8,
  * Size of entries do be deleted. The unit is 1 entry, regardless of entry type.
  * Access: OP
  */
-MLXSW_ITEM32_INDEXED(reg, iedr, rec_size, MLXSW_REG_IEDR_BASE_LEN, 0, 11,
+MLXSW_ITEM32_INDEXED(reg, iedr, rec_size, MLXSW_REG_IEDR_BASE_LEN, 0, 13,
 		     MLXSW_REG_IEDR_REC_LEN, 0x00, false);
 
 /* reg_iedr_rec_index_start
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 24ca8d5bc564..f78bde8bc16e 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -25,9 +25,7 @@
 #include <linux/log2.h>
 #include <net/switchdev.h>
 #include <net/pkt_cls.h>
-#include <net/tc_act/tc_mirred.h>
 #include <net/netevent.h>
-#include <net/tc_act/tc_sample.h>
 #include <net/addrconf.h>
 
 #include "spectrum.h"
@@ -582,16 +580,6 @@ static int mlxsw_sp_base_mac_get(struct mlxsw_sp *mlxsw_sp)
 	return 0;
 }
 
-static int mlxsw_sp_port_sample_set(struct mlxsw_sp_port *mlxsw_sp_port,
-				    bool enable, u32 rate)
-{
-	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
-	char mpsc_pl[MLXSW_REG_MPSC_LEN];
-
-	mlxsw_reg_mpsc_pack(mpsc_pl, mlxsw_sp_port->local_port, enable, rate);
-	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(mpsc), mpsc_pl);
-}
-
 static int mlxsw_sp_port_admin_status_set(struct mlxsw_sp_port *mlxsw_sp_port,
 					  bool is_up)
 {
@@ -1362,412 +1350,6 @@ static int mlxsw_sp_port_kill_vid(struct net_device *dev,
 	return 0;
 }
 
-static struct mlxsw_sp_port_mall_tc_entry *
-mlxsw_sp_port_mall_tc_entry_find(struct mlxsw_sp_port *port,
-				 unsigned long cookie) {
-	struct mlxsw_sp_port_mall_tc_entry *mall_tc_entry;
-
-	list_for_each_entry(mall_tc_entry, &port->mall_tc_list, list)
-		if (mall_tc_entry->cookie == cookie)
-			return mall_tc_entry;
-
-	return NULL;
-}
-
-static int
-mlxsw_sp_port_add_cls_matchall_mirror(struct mlxsw_sp_port *mlxsw_sp_port,
-				      struct mlxsw_sp_port_mall_mirror_tc_entry *mirror,
-				      const struct flow_action_entry *act,
-				      bool ingress)
-{
-	enum mlxsw_sp_span_type span_type;
-
-	if (!act->dev) {
-		netdev_err(mlxsw_sp_port->dev, "Could not find requested device\n");
-		return -EINVAL;
-	}
-
-	mirror->ingress = ingress;
-	span_type = ingress ? MLXSW_SP_SPAN_INGRESS : MLXSW_SP_SPAN_EGRESS;
-	return mlxsw_sp_span_mirror_add(mlxsw_sp_port, act->dev, span_type,
-					true, &mirror->span_id);
-}
-
-static void
-mlxsw_sp_port_del_cls_matchall_mirror(struct mlxsw_sp_port *mlxsw_sp_port,
-				      struct mlxsw_sp_port_mall_mirror_tc_entry *mirror)
-{
-	enum mlxsw_sp_span_type span_type;
-
-	span_type = mirror->ingress ?
-			MLXSW_SP_SPAN_INGRESS : MLXSW_SP_SPAN_EGRESS;
-	mlxsw_sp_span_mirror_del(mlxsw_sp_port, mirror->span_id,
-				 span_type, true);
-}
-
-static int
-mlxsw_sp_port_add_cls_matchall_sample(struct mlxsw_sp_port *mlxsw_sp_port,
-				      struct tc_cls_matchall_offload *cls,
-				      const struct flow_action_entry *act,
-				      bool ingress)
-{
-	int err;
-
-	if (!mlxsw_sp_port->sample)
-		return -EOPNOTSUPP;
-	if (rtnl_dereference(mlxsw_sp_port->sample->psample_group)) {
-		netdev_err(mlxsw_sp_port->dev, "sample already active\n");
-		return -EEXIST;
-	}
-	if (act->sample.rate > MLXSW_REG_MPSC_RATE_MAX) {
-		netdev_err(mlxsw_sp_port->dev, "sample rate not supported\n");
-		return -EOPNOTSUPP;
-	}
-
-	rcu_assign_pointer(mlxsw_sp_port->sample->psample_group,
-			   act->sample.psample_group);
-	mlxsw_sp_port->sample->truncate = act->sample.truncate;
-	mlxsw_sp_port->sample->trunc_size = act->sample.trunc_size;
-	mlxsw_sp_port->sample->rate = act->sample.rate;
-
-	err = mlxsw_sp_port_sample_set(mlxsw_sp_port, true, act->sample.rate);
-	if (err)
-		goto err_port_sample_set;
-	return 0;
-
-err_port_sample_set:
-	RCU_INIT_POINTER(mlxsw_sp_port->sample->psample_group, NULL);
-	return err;
-}
-
-static void
-mlxsw_sp_port_del_cls_matchall_sample(struct mlxsw_sp_port *mlxsw_sp_port)
-{
-	if (!mlxsw_sp_port->sample)
-		return;
-
-	mlxsw_sp_port_sample_set(mlxsw_sp_port, false, 1);
-	RCU_INIT_POINTER(mlxsw_sp_port->sample->psample_group, NULL);
-}
-
-static int mlxsw_sp_port_add_cls_matchall(struct mlxsw_sp_port *mlxsw_sp_port,
-					  struct tc_cls_matchall_offload *f,
-					  bool ingress)
-{
-	struct mlxsw_sp_port_mall_tc_entry *mall_tc_entry;
-	__be16 protocol = f->common.protocol;
-	struct flow_action_entry *act;
-	int err;
-
-	if (!flow_offload_has_one_action(&f->rule->action)) {
-		netdev_err(mlxsw_sp_port->dev, "only singular actions are supported\n");
-		return -EOPNOTSUPP;
-	}
-
-	mall_tc_entry = kzalloc(sizeof(*mall_tc_entry), GFP_KERNEL);
-	if (!mall_tc_entry)
-		return -ENOMEM;
-	mall_tc_entry->cookie = f->cookie;
-
-	act = &f->rule->action.entries[0];
-
-	if (act->id == FLOW_ACTION_MIRRED && protocol == htons(ETH_P_ALL)) {
-		struct mlxsw_sp_port_mall_mirror_tc_entry *mirror;
-
-		mall_tc_entry->type = MLXSW_SP_PORT_MALL_MIRROR;
-		mirror = &mall_tc_entry->mirror;
-		err = mlxsw_sp_port_add_cls_matchall_mirror(mlxsw_sp_port,
-							    mirror, act,
-							    ingress);
-	} else if (act->id == FLOW_ACTION_SAMPLE &&
-		   protocol == htons(ETH_P_ALL)) {
-		mall_tc_entry->type = MLXSW_SP_PORT_MALL_SAMPLE;
-		err = mlxsw_sp_port_add_cls_matchall_sample(mlxsw_sp_port, f,
-							    act, ingress);
-	} else {
-		err = -EOPNOTSUPP;
-	}
-
-	if (err)
-		goto err_add_action;
-
-	list_add_tail(&mall_tc_entry->list, &mlxsw_sp_port->mall_tc_list);
-	return 0;
-
-err_add_action:
-	kfree(mall_tc_entry);
-	return err;
-}
-
-static void mlxsw_sp_port_del_cls_matchall(struct mlxsw_sp_port *mlxsw_sp_port,
-					   struct tc_cls_matchall_offload *f)
-{
-	struct mlxsw_sp_port_mall_tc_entry *mall_tc_entry;
-
-	mall_tc_entry = mlxsw_sp_port_mall_tc_entry_find(mlxsw_sp_port,
-							 f->cookie);
-	if (!mall_tc_entry) {
-		netdev_dbg(mlxsw_sp_port->dev, "tc entry not found on port\n");
-		return;
-	}
-	list_del(&mall_tc_entry->list);
-
-	switch (mall_tc_entry->type) {
-	case MLXSW_SP_PORT_MALL_MIRROR:
-		mlxsw_sp_port_del_cls_matchall_mirror(mlxsw_sp_port,
-						      &mall_tc_entry->mirror);
-		break;
-	case MLXSW_SP_PORT_MALL_SAMPLE:
-		mlxsw_sp_port_del_cls_matchall_sample(mlxsw_sp_port);
-		break;
-	default:
-		WARN_ON(1);
-	}
-
-	kfree(mall_tc_entry);
-}
-
-static int mlxsw_sp_setup_tc_cls_matchall(struct mlxsw_sp_port *mlxsw_sp_port,
-					  struct tc_cls_matchall_offload *f,
-					  bool ingress)
-{
-	switch (f->command) {
-	case TC_CLSMATCHALL_REPLACE:
-		return mlxsw_sp_port_add_cls_matchall(mlxsw_sp_port, f,
-						      ingress);
-	case TC_CLSMATCHALL_DESTROY:
-		mlxsw_sp_port_del_cls_matchall(mlxsw_sp_port, f);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static int
-mlxsw_sp_setup_tc_cls_flower(struct mlxsw_sp_acl_block *acl_block,
-			     struct flow_cls_offload *f)
-{
-	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_acl_block_mlxsw_sp(acl_block);
-
-	switch (f->command) {
-	case FLOW_CLS_REPLACE:
-		return mlxsw_sp_flower_replace(mlxsw_sp, acl_block, f);
-	case FLOW_CLS_DESTROY:
-		mlxsw_sp_flower_destroy(mlxsw_sp, acl_block, f);
-		return 0;
-	case FLOW_CLS_STATS:
-		return mlxsw_sp_flower_stats(mlxsw_sp, acl_block, f);
-	case FLOW_CLS_TMPLT_CREATE:
-		return mlxsw_sp_flower_tmplt_create(mlxsw_sp, acl_block, f);
-	case FLOW_CLS_TMPLT_DESTROY:
-		mlxsw_sp_flower_tmplt_destroy(mlxsw_sp, acl_block, f);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static int mlxsw_sp_setup_tc_block_cb_matchall(enum tc_setup_type type,
-					       void *type_data,
-					       void *cb_priv, bool ingress)
-{
-	struct mlxsw_sp_port *mlxsw_sp_port = cb_priv;
-
-	switch (type) {
-	case TC_SETUP_CLSMATCHALL:
-		if (!tc_cls_can_offload_and_chain0(mlxsw_sp_port->dev,
-						   type_data))
-			return -EOPNOTSUPP;
-
-		return mlxsw_sp_setup_tc_cls_matchall(mlxsw_sp_port, type_data,
-						      ingress);
-	case TC_SETUP_CLSFLOWER:
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static int mlxsw_sp_setup_tc_block_cb_matchall_ig(enum tc_setup_type type,
-						  void *type_data,
-						  void *cb_priv)
-{
-	return mlxsw_sp_setup_tc_block_cb_matchall(type, type_data,
-						   cb_priv, true);
-}
-
-static int mlxsw_sp_setup_tc_block_cb_matchall_eg(enum tc_setup_type type,
-						  void *type_data,
-						  void *cb_priv)
-{
-	return mlxsw_sp_setup_tc_block_cb_matchall(type, type_data,
-						   cb_priv, false);
-}
-
-static int mlxsw_sp_setup_tc_block_cb_flower(enum tc_setup_type type,
-					     void *type_data, void *cb_priv)
-{
-	struct mlxsw_sp_acl_block *acl_block = cb_priv;
-
-	switch (type) {
-	case TC_SETUP_CLSMATCHALL:
-		return 0;
-	case TC_SETUP_CLSFLOWER:
-		if (mlxsw_sp_acl_block_disabled(acl_block))
-			return -EOPNOTSUPP;
-
-		return mlxsw_sp_setup_tc_cls_flower(acl_block, type_data);
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static void mlxsw_sp_tc_block_flower_release(void *cb_priv)
-{
-	struct mlxsw_sp_acl_block *acl_block = cb_priv;
-
-	mlxsw_sp_acl_block_destroy(acl_block);
-}
-
-static LIST_HEAD(mlxsw_sp_block_cb_list);
-
-static int
-mlxsw_sp_setup_tc_block_flower_bind(struct mlxsw_sp_port *mlxsw_sp_port,
-			            struct flow_block_offload *f, bool ingress)
-{
-	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
-	struct mlxsw_sp_acl_block *acl_block;
-	struct flow_block_cb *block_cb;
-	bool register_block = false;
-	int err;
-
-	block_cb = flow_block_cb_lookup(f->block,
-					mlxsw_sp_setup_tc_block_cb_flower,
-					mlxsw_sp);
-	if (!block_cb) {
-		acl_block = mlxsw_sp_acl_block_create(mlxsw_sp, f->net);
-		if (!acl_block)
-			return -ENOMEM;
-		block_cb = flow_block_cb_alloc(mlxsw_sp_setup_tc_block_cb_flower,
-					       mlxsw_sp, acl_block,
-					       mlxsw_sp_tc_block_flower_release);
-		if (IS_ERR(block_cb)) {
-			mlxsw_sp_acl_block_destroy(acl_block);
-			err = PTR_ERR(block_cb);
-			goto err_cb_register;
-		}
-		register_block = true;
-	} else {
-		acl_block = flow_block_cb_priv(block_cb);
-	}
-	flow_block_cb_incref(block_cb);
-	err = mlxsw_sp_acl_block_bind(mlxsw_sp, acl_block,
-				      mlxsw_sp_port, ingress, f->extack);
-	if (err)
-		goto err_block_bind;
-
-	if (ingress)
-		mlxsw_sp_port->ing_acl_block = acl_block;
-	else
-		mlxsw_sp_port->eg_acl_block = acl_block;
-
-	if (register_block) {
-		flow_block_cb_add(block_cb, f);
-		list_add_tail(&block_cb->driver_list, &mlxsw_sp_block_cb_list);
-	}
-
-	return 0;
-
-err_block_bind:
-	if (!flow_block_cb_decref(block_cb))
-		flow_block_cb_free(block_cb);
-err_cb_register:
-	return err;
-}
-
-static void
-mlxsw_sp_setup_tc_block_flower_unbind(struct mlxsw_sp_port *mlxsw_sp_port,
-				      struct flow_block_offload *f, bool ingress)
-{
-	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
-	struct mlxsw_sp_acl_block *acl_block;
-	struct flow_block_cb *block_cb;
-	int err;
-
-	block_cb = flow_block_cb_lookup(f->block,
-					mlxsw_sp_setup_tc_block_cb_flower,
-					mlxsw_sp);
-	if (!block_cb)
-		return;
-
-	if (ingress)
-		mlxsw_sp_port->ing_acl_block = NULL;
-	else
-		mlxsw_sp_port->eg_acl_block = NULL;
-
-	acl_block = flow_block_cb_priv(block_cb);
-	err = mlxsw_sp_acl_block_unbind(mlxsw_sp, acl_block,
-					mlxsw_sp_port, ingress);
-	if (!err && !flow_block_cb_decref(block_cb)) {
-		flow_block_cb_remove(block_cb, f);
-		list_del(&block_cb->driver_list);
-	}
-}
-
-static int mlxsw_sp_setup_tc_block(struct mlxsw_sp_port *mlxsw_sp_port,
-				   struct flow_block_offload *f)
-{
-	struct flow_block_cb *block_cb;
-	flow_setup_cb_t *cb;
-	bool ingress;
-	int err;
-
-	if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS) {
-		cb = mlxsw_sp_setup_tc_block_cb_matchall_ig;
-		ingress = true;
-	} else if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_EGRESS) {
-		cb = mlxsw_sp_setup_tc_block_cb_matchall_eg;
-		ingress = false;
-	} else {
-		return -EOPNOTSUPP;
-	}
-
-	f->driver_block_list = &mlxsw_sp_block_cb_list;
-
-	switch (f->command) {
-	case FLOW_BLOCK_BIND:
-		if (flow_block_cb_is_busy(cb, mlxsw_sp_port,
-					  &mlxsw_sp_block_cb_list))
-			return -EBUSY;
-
-		block_cb = flow_block_cb_alloc(cb, mlxsw_sp_port,
-					       mlxsw_sp_port, NULL);
-		if (IS_ERR(block_cb))
-			return PTR_ERR(block_cb);
-		err = mlxsw_sp_setup_tc_block_flower_bind(mlxsw_sp_port, f,
-							  ingress);
-		if (err) {
-			flow_block_cb_free(block_cb);
-			return err;
-		}
-		flow_block_cb_add(block_cb, f);
-		list_add_tail(&block_cb->driver_list, &mlxsw_sp_block_cb_list);
-		return 0;
-	case FLOW_BLOCK_UNBIND:
-		mlxsw_sp_setup_tc_block_flower_unbind(mlxsw_sp_port,
-						      f, ingress);
-		block_cb = flow_block_cb_lookup(f->block, cb, mlxsw_sp_port);
-		if (!block_cb)
-			return -ENOENT;
-
-		flow_block_cb_remove(block_cb, f);
-		list_del(&block_cb->driver_list);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
 static int mlxsw_sp_setup_tc(struct net_device *dev, enum tc_setup_type type,
 			     void *type_data)
 {
@@ -1791,23 +1373,21 @@ static int mlxsw_sp_setup_tc(struct net_device *dev, enum tc_setup_type type,
 	}
 }
 
-
 static int mlxsw_sp_feature_hw_tc(struct net_device *dev, bool enable)
 {
 	struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
 
 	if (!enable) {
-		if (mlxsw_sp_acl_block_rule_count(mlxsw_sp_port->ing_acl_block) ||
-		    mlxsw_sp_acl_block_rule_count(mlxsw_sp_port->eg_acl_block) ||
-		    !list_empty(&mlxsw_sp_port->mall_tc_list)) {
+		if (mlxsw_sp_flow_block_rule_count(mlxsw_sp_port->ing_flow_block) ||
+		    mlxsw_sp_flow_block_rule_count(mlxsw_sp_port->eg_flow_block)) {
 			netdev_err(dev, "Active offloaded tc filters, can't turn hw_tc_offload off\n");
 			return -EINVAL;
 		}
-		mlxsw_sp_acl_block_disable_inc(mlxsw_sp_port->ing_acl_block);
-		mlxsw_sp_acl_block_disable_inc(mlxsw_sp_port->eg_acl_block);
+		mlxsw_sp_flow_block_disable_inc(mlxsw_sp_port->ing_flow_block);
+		mlxsw_sp_flow_block_disable_inc(mlxsw_sp_port->eg_flow_block);
 	} else {
-		mlxsw_sp_acl_block_disable_dec(mlxsw_sp_port->ing_acl_block);
-		mlxsw_sp_acl_block_disable_dec(mlxsw_sp_port->eg_acl_block);
+		mlxsw_sp_flow_block_disable_dec(mlxsw_sp_port->ing_flow_block);
+		mlxsw_sp_flow_block_disable_dec(mlxsw_sp_port->eg_flow_block);
 	}
 	return 0;
 }
@@ -3695,7 +3275,6 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 	mlxsw_sp_port->mapping = *port_mapping;
 	mlxsw_sp_port->link.autoneg = 1;
 	INIT_LIST_HEAD(&mlxsw_sp_port->vlans_list);
-	INIT_LIST_HEAD(&mlxsw_sp_port->mall_tc_list);
 
 	mlxsw_sp_port->pcpu_stats =
 		netdev_alloc_pcpu_stats(struct mlxsw_sp_port_pcpu_stats);
@@ -3704,13 +3283,6 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 		goto err_alloc_stats;
 	}
 
-	mlxsw_sp_port->sample = kzalloc(sizeof(*mlxsw_sp_port->sample),
-					GFP_KERNEL);
-	if (!mlxsw_sp_port->sample) {
-		err = -ENOMEM;
-		goto err_alloc_sample;
-	}
-
 	INIT_DELAYED_WORK(&mlxsw_sp_port->periodic_hw_stats.update_dw,
 			  &update_stats_cache);
 
@@ -3897,8 +3469,6 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 err_port_swid_set:
 	mlxsw_sp_port_module_unmap(mlxsw_sp_port);
 err_port_module_map:
-	kfree(mlxsw_sp_port->sample);
-err_alloc_sample:
 	free_percpu(mlxsw_sp_port->pcpu_stats);
 err_alloc_stats:
 	free_netdev(dev);
@@ -3926,7 +3496,6 @@ static void mlxsw_sp_port_remove(struct mlxsw_sp *mlxsw_sp, u8 local_port)
 	mlxsw_sp_port_tc_mc_mode_set(mlxsw_sp_port, false);
 	mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT);
 	mlxsw_sp_port_module_unmap(mlxsw_sp_port);
-	kfree(mlxsw_sp_port->sample);
 	free_percpu(mlxsw_sp_port->pcpu_stats);
 	WARN_ON_ONCE(!list_empty(&mlxsw_sp_port->vlans_list));
 	free_netdev(mlxsw_sp_port->dev);
@@ -4413,7 +3982,7 @@ static void mlxsw_sp_rx_listener_sample_func(struct sk_buff *skb, u8 local_port,
 {
 	struct mlxsw_sp *mlxsw_sp = priv;
 	struct mlxsw_sp_port *mlxsw_sp_port = mlxsw_sp->ports[local_port];
-	struct psample_group *psample_group;
+	struct mlxsw_sp_port_sample *sample;
 	u32 size;
 
 	if (unlikely(!mlxsw_sp_port)) {
@@ -4421,22 +3990,14 @@ static void mlxsw_sp_rx_listener_sample_func(struct sk_buff *skb, u8 local_port,
 				     local_port);
 		goto out;
 	}
-	if (unlikely(!mlxsw_sp_port->sample)) {
-		dev_warn_ratelimited(mlxsw_sp->bus_info->dev, "Port %d: sample skb received on unsupported port\n",
-				     local_port);
-		goto out;
-	}
-
-	size = mlxsw_sp_port->sample->truncate ?
-		  mlxsw_sp_port->sample->trunc_size : skb->len;
 
 	rcu_read_lock();
-	psample_group = rcu_dereference(mlxsw_sp_port->sample->psample_group);
-	if (!psample_group)
+	sample = rcu_dereference(mlxsw_sp_port->sample);
+	if (!sample)
 		goto out_unlock;
-	psample_sample_packet(psample_group, skb, size,
-			      mlxsw_sp_port->dev->ifindex, 0,
-			      mlxsw_sp_port->sample->rate);
+	size = sample->truncate ? sample->trunc_size : skb->len;
+	psample_sample_packet(sample->psample_group, skb, size,
+			      mlxsw_sp_port->dev->ifindex, 0, sample->rate);
 out_unlock:
 	rcu_read_unlock();
 out:
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
index ca56e72cb4b7..a12ca673c224 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
@@ -109,25 +109,6 @@ struct mlxsw_sp_mid {
 	unsigned long *ports_in_mid; /* bits array */
 };
 
-enum mlxsw_sp_port_mall_action_type {
-	MLXSW_SP_PORT_MALL_MIRROR,
-	MLXSW_SP_PORT_MALL_SAMPLE,
-};
-
-struct mlxsw_sp_port_mall_mirror_tc_entry {
-	int span_id;
-	bool ingress;
-};
-
-struct mlxsw_sp_port_mall_tc_entry {
-	struct list_head list;
-	unsigned long cookie;
-	enum mlxsw_sp_port_mall_action_type type;
-	union {
-		struct mlxsw_sp_port_mall_mirror_tc_entry mirror;
-	};
-};
-
 struct mlxsw_sp_sb;
 struct mlxsw_sp_bridge;
 struct mlxsw_sp_router;
@@ -211,7 +192,7 @@ struct mlxsw_sp_port_pcpu_stats {
 };
 
 struct mlxsw_sp_port_sample {
-	struct psample_group __rcu *psample_group;
+	struct psample_group *psample_group;
 	u32 trunc_size;
 	u32 rate;
 	bool truncate;
@@ -274,21 +255,19 @@ struct mlxsw_sp_port {
 					       * the same localport can have
 					       * different mapping.
 					       */
-	/* TC handles */
-	struct list_head mall_tc_list;
 	struct {
 		#define MLXSW_HW_STATS_UPDATE_TIME HZ
 		struct rtnl_link_stats64 stats;
 		struct mlxsw_sp_port_xstats xstats;
 		struct delayed_work update_dw;
 	} periodic_hw_stats;
-	struct mlxsw_sp_port_sample *sample;
+	struct mlxsw_sp_port_sample __rcu *sample;
 	struct list_head vlans_list;
 	struct mlxsw_sp_port_vlan *default_vlan;
 	struct mlxsw_sp_qdisc_state *qdisc;
 	unsigned acl_rule_count;
-	struct mlxsw_sp_acl_block *ing_acl_block;
-	struct mlxsw_sp_acl_block *eg_acl_block;
+	struct mlxsw_sp_flow_block *ing_flow_block;
+	struct mlxsw_sp_flow_block *eg_flow_block;
 	struct {
 		struct delayed_work shaper_dw;
 		struct hwtstamp_config hwtstamp_config;
@@ -654,17 +633,10 @@ struct mlxsw_sp_acl_rule_info {
 	unsigned int counter_index;
 };
 
-struct mlxsw_sp_acl_block;
-struct mlxsw_sp_acl_ruleset;
-
-/* spectrum_acl.c */
-enum mlxsw_sp_acl_profile {
-	MLXSW_SP_ACL_PROFILE_FLOWER,
-	MLXSW_SP_ACL_PROFILE_MR,
-};
-
-struct mlxsw_sp_acl_block {
+/* spectrum_flow.c */
+struct mlxsw_sp_flow_block {
 	struct list_head binding_list;
+	struct list_head mall_list;
 	struct mlxsw_sp_acl_ruleset *ruleset_zero;
 	struct mlxsw_sp *mlxsw_sp;
 	unsigned int rule_count;
@@ -676,35 +648,92 @@ struct mlxsw_sp_acl_block {
 	struct net *net;
 };
 
+struct mlxsw_sp_flow_block_binding {
+	struct list_head list;
+	struct net_device *dev;
+	struct mlxsw_sp_port *mlxsw_sp_port;
+	bool ingress;
+};
+
+static inline struct mlxsw_sp *
+mlxsw_sp_flow_block_mlxsw_sp(struct mlxsw_sp_flow_block *block)
+{
+	return block->mlxsw_sp;
+}
+
+static inline unsigned int
+mlxsw_sp_flow_block_rule_count(const struct mlxsw_sp_flow_block *block)
+{
+	return block ? block->rule_count : 0;
+}
+
+static inline void
+mlxsw_sp_flow_block_disable_inc(struct mlxsw_sp_flow_block *block)
+{
+	if (block)
+		block->disable_count++;
+}
+
+static inline void
+mlxsw_sp_flow_block_disable_dec(struct mlxsw_sp_flow_block *block)
+{
+	if (block)
+		block->disable_count--;
+}
+
+static inline bool
+mlxsw_sp_flow_block_disabled(const struct mlxsw_sp_flow_block *block)
+{
+	return block->disable_count;
+}
+
+static inline bool
+mlxsw_sp_flow_block_is_egress_bound(const struct mlxsw_sp_flow_block *block)
+{
+	return block->egress_binding_count;
+}
+
+static inline bool
+mlxsw_sp_flow_block_is_ingress_bound(const struct mlxsw_sp_flow_block *block)
+{
+	return block->ingress_binding_count;
+}
+
+static inline bool
+mlxsw_sp_flow_block_is_mixed_bound(const struct mlxsw_sp_flow_block *block)
+{
+	return block->ingress_binding_count && block->egress_binding_count;
+}
+
+struct mlxsw_sp_flow_block *mlxsw_sp_flow_block_create(struct mlxsw_sp *mlxsw_sp,
+						       struct net *net);
+void mlxsw_sp_flow_block_destroy(struct mlxsw_sp_flow_block *block);
+int mlxsw_sp_setup_tc_block(struct mlxsw_sp_port *mlxsw_sp_port,
+			    struct flow_block_offload *f);
+
+/* spectrum_acl.c */
+struct mlxsw_sp_acl_ruleset;
+
+enum mlxsw_sp_acl_profile {
+	MLXSW_SP_ACL_PROFILE_FLOWER,
+	MLXSW_SP_ACL_PROFILE_MR,
+};
+
 struct mlxsw_afk *mlxsw_sp_acl_afk(struct mlxsw_sp_acl *acl);
-struct mlxsw_sp *mlxsw_sp_acl_block_mlxsw_sp(struct mlxsw_sp_acl_block *block);
-unsigned int
-mlxsw_sp_acl_block_rule_count(const struct mlxsw_sp_acl_block *block);
-void mlxsw_sp_acl_block_disable_inc(struct mlxsw_sp_acl_block *block);
-void mlxsw_sp_acl_block_disable_dec(struct mlxsw_sp_acl_block *block);
-bool mlxsw_sp_acl_block_disabled(const struct mlxsw_sp_acl_block *block);
-struct mlxsw_sp_acl_block *mlxsw_sp_acl_block_create(struct mlxsw_sp *mlxsw_sp,
-						     struct net *net);
-void mlxsw_sp_acl_block_destroy(struct mlxsw_sp_acl_block *block);
-int mlxsw_sp_acl_block_bind(struct mlxsw_sp *mlxsw_sp,
-			    struct mlxsw_sp_acl_block *block,
-			    struct mlxsw_sp_port *mlxsw_sp_port,
-			    bool ingress,
-			    struct netlink_ext_ack *extack);
-int mlxsw_sp_acl_block_unbind(struct mlxsw_sp *mlxsw_sp,
-			      struct mlxsw_sp_acl_block *block,
-			      struct mlxsw_sp_port *mlxsw_sp_port,
-			      bool ingress);
-bool mlxsw_sp_acl_block_is_egress_bound(const struct mlxsw_sp_acl_block *block);
-bool mlxsw_sp_acl_block_is_ingress_bound(const struct mlxsw_sp_acl_block *block);
-bool mlxsw_sp_acl_block_is_mixed_bound(const struct mlxsw_sp_acl_block *block);
+
+int mlxsw_sp_acl_ruleset_bind(struct mlxsw_sp *mlxsw_sp,
+			      struct mlxsw_sp_flow_block *block,
+			      struct mlxsw_sp_flow_block_binding *binding);
+void mlxsw_sp_acl_ruleset_unbind(struct mlxsw_sp *mlxsw_sp,
+				 struct mlxsw_sp_flow_block *block,
+				 struct mlxsw_sp_flow_block_binding *binding);
 struct mlxsw_sp_acl_ruleset *
 mlxsw_sp_acl_ruleset_lookup(struct mlxsw_sp *mlxsw_sp,
-			    struct mlxsw_sp_acl_block *block, u32 chain_index,
+			    struct mlxsw_sp_flow_block *block, u32 chain_index,
 			    enum mlxsw_sp_acl_profile profile);
 struct mlxsw_sp_acl_ruleset *
 mlxsw_sp_acl_ruleset_get(struct mlxsw_sp *mlxsw_sp,
-			 struct mlxsw_sp_acl_block *block, u32 chain_index,
+			 struct mlxsw_sp_flow_block *block, u32 chain_index,
 			 enum mlxsw_sp_acl_profile profile,
 			 struct mlxsw_afk_element_usage *tmplt_elusage);
 void mlxsw_sp_acl_ruleset_put(struct mlxsw_sp *mlxsw_sp,
@@ -736,7 +765,7 @@ int mlxsw_sp_acl_rulei_act_drop(struct mlxsw_sp_acl_rule_info *rulei,
 int mlxsw_sp_acl_rulei_act_trap(struct mlxsw_sp_acl_rule_info *rulei);
 int mlxsw_sp_acl_rulei_act_mirror(struct mlxsw_sp *mlxsw_sp,
 				  struct mlxsw_sp_acl_rule_info *rulei,
-				  struct mlxsw_sp_acl_block *block,
+				  struct mlxsw_sp_flow_block *block,
 				  struct net_device *out_dev,
 				  struct netlink_ext_ack *extack);
 int mlxsw_sp_acl_rulei_act_fwd(struct mlxsw_sp *mlxsw_sp,
@@ -857,21 +886,31 @@ extern const struct mlxsw_afa_ops mlxsw_sp2_act_afa_ops;
 extern const struct mlxsw_afk_ops mlxsw_sp1_afk_ops;
 extern const struct mlxsw_afk_ops mlxsw_sp2_afk_ops;
 
+/* spectrum_matchall.c */
+int mlxsw_sp_mall_replace(struct mlxsw_sp_flow_block *block,
+			  struct tc_cls_matchall_offload *f);
+void mlxsw_sp_mall_destroy(struct mlxsw_sp_flow_block *block,
+			   struct tc_cls_matchall_offload *f);
+int mlxsw_sp_mall_port_bind(struct mlxsw_sp_flow_block *block,
+			    struct mlxsw_sp_port *mlxsw_sp_port);
+void mlxsw_sp_mall_port_unbind(struct mlxsw_sp_flow_block *block,
+			       struct mlxsw_sp_port *mlxsw_sp_port);
+
 /* spectrum_flower.c */
 int mlxsw_sp_flower_replace(struct mlxsw_sp *mlxsw_sp,
-			    struct mlxsw_sp_acl_block *block,
+			    struct mlxsw_sp_flow_block *block,
 			    struct flow_cls_offload *f);
 void mlxsw_sp_flower_destroy(struct mlxsw_sp *mlxsw_sp,
-			     struct mlxsw_sp_acl_block *block,
+			     struct mlxsw_sp_flow_block *block,
 			     struct flow_cls_offload *f);
 int mlxsw_sp_flower_stats(struct mlxsw_sp *mlxsw_sp,
-			  struct mlxsw_sp_acl_block *block,
+			  struct mlxsw_sp_flow_block *block,
 			  struct flow_cls_offload *f);
 int mlxsw_sp_flower_tmplt_create(struct mlxsw_sp *mlxsw_sp,
-				 struct mlxsw_sp_acl_block *block,
+				 struct mlxsw_sp_flow_block *block,
 				 struct flow_cls_offload *f);
 void mlxsw_sp_flower_tmplt_destroy(struct mlxsw_sp *mlxsw_sp,
-				   struct mlxsw_sp_acl_block *block,
+				   struct mlxsw_sp_flow_block *block,
 				   struct flow_cls_offload *f);
 
 /* spectrum_qdisc.c */
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum2_mr_tcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum2_mr_tcam.c
index e31ec75ac035..a11d911302f1 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum2_mr_tcam.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum2_mr_tcam.c
@@ -9,7 +9,7 @@
 
 struct mlxsw_sp2_mr_tcam {
 	struct mlxsw_sp *mlxsw_sp;
-	struct mlxsw_sp_acl_block *acl_block;
+	struct mlxsw_sp_flow_block *flow_block;
 	struct mlxsw_sp_acl_ruleset *ruleset4;
 	struct mlxsw_sp_acl_ruleset *ruleset6;
 };
@@ -61,7 +61,7 @@ static int mlxsw_sp2_mr_tcam_ipv4_init(struct mlxsw_sp2_mr_tcam *mr_tcam)
 				     mlxsw_sp2_mr_tcam_usage_ipv4,
 				     ARRAY_SIZE(mlxsw_sp2_mr_tcam_usage_ipv4));
 	mr_tcam->ruleset4 = mlxsw_sp_acl_ruleset_get(mr_tcam->mlxsw_sp,
-						     mr_tcam->acl_block,
+						     mr_tcam->flow_block,
 						     MLXSW_SP_L3_PROTO_IPV4,
 						     MLXSW_SP_ACL_PROFILE_MR,
 						     &elusage);
@@ -111,7 +111,7 @@ static int mlxsw_sp2_mr_tcam_ipv6_init(struct mlxsw_sp2_mr_tcam *mr_tcam)
 				     mlxsw_sp2_mr_tcam_usage_ipv6,
 				     ARRAY_SIZE(mlxsw_sp2_mr_tcam_usage_ipv6));
 	mr_tcam->ruleset6 = mlxsw_sp_acl_ruleset_get(mr_tcam->mlxsw_sp,
-						     mr_tcam->acl_block,
+						     mr_tcam->flow_block,
 						     MLXSW_SP_L3_PROTO_IPV6,
 						     MLXSW_SP_ACL_PROFILE_MR,
 						     &elusage);
@@ -289,8 +289,8 @@ static int mlxsw_sp2_mr_tcam_init(struct mlxsw_sp *mlxsw_sp, void *priv)
 	int err;
 
 	mr_tcam->mlxsw_sp = mlxsw_sp;
-	mr_tcam->acl_block = mlxsw_sp_acl_block_create(mlxsw_sp, NULL);
-	if (!mr_tcam->acl_block)
+	mr_tcam->flow_block = mlxsw_sp_flow_block_create(mlxsw_sp, NULL);
+	if (!mr_tcam->flow_block)
 		return -ENOMEM;
 
 	err = mlxsw_sp2_mr_tcam_ipv4_init(mr_tcam);
@@ -306,7 +306,7 @@ static int mlxsw_sp2_mr_tcam_init(struct mlxsw_sp *mlxsw_sp, void *priv)
 err_ipv6_init:
 	mlxsw_sp2_mr_tcam_ipv4_fini(mr_tcam);
 err_ipv4_init:
-	mlxsw_sp_acl_block_destroy(mr_tcam->acl_block);
+	mlxsw_sp_flow_block_destroy(mr_tcam->flow_block);
 	return err;
 }
 
@@ -316,7 +316,7 @@ static void mlxsw_sp2_mr_tcam_fini(void *priv)
 
 	mlxsw_sp2_mr_tcam_ipv6_fini(mr_tcam);
 	mlxsw_sp2_mr_tcam_ipv4_fini(mr_tcam);
-	mlxsw_sp_acl_block_destroy(mr_tcam->acl_block);
+	mlxsw_sp_flow_block_destroy(mr_tcam->flow_block);
 }
 
 const struct mlxsw_sp_mr_tcam_ops mlxsw_sp2_mr_tcam_ops = {
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c
index 01cff711bbd2..c61f78e30397 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c
@@ -40,15 +40,8 @@ struct mlxsw_afk *mlxsw_sp_acl_afk(struct mlxsw_sp_acl *acl)
 	return acl->afk;
 }
 
-struct mlxsw_sp_acl_block_binding {
-	struct list_head list;
-	struct net_device *dev;
-	struct mlxsw_sp_port *mlxsw_sp_port;
-	bool ingress;
-};
-
 struct mlxsw_sp_acl_ruleset_ht_key {
-	struct mlxsw_sp_acl_block *block;
+	struct mlxsw_sp_flow_block *block;
 	u32 chain_index;
 	const struct mlxsw_sp_acl_profile_ops *ops;
 };
@@ -94,49 +87,6 @@ struct mlxsw_sp_fid *mlxsw_sp_acl_dummy_fid(struct mlxsw_sp *mlxsw_sp)
 	return mlxsw_sp->acl->dummy_fid;
 }
 
-struct mlxsw_sp *mlxsw_sp_acl_block_mlxsw_sp(struct mlxsw_sp_acl_block *block)
-{
-	return block->mlxsw_sp;
-}
-
-unsigned int
-mlxsw_sp_acl_block_rule_count(const struct mlxsw_sp_acl_block *block)
-{
-	return block ? block->rule_count : 0;
-}
-
-void mlxsw_sp_acl_block_disable_inc(struct mlxsw_sp_acl_block *block)
-{
-	if (block)
-		block->disable_count++;
-}
-
-void mlxsw_sp_acl_block_disable_dec(struct mlxsw_sp_acl_block *block)
-{
-	if (block)
-		block->disable_count--;
-}
-
-bool mlxsw_sp_acl_block_disabled(const struct mlxsw_sp_acl_block *block)
-{
-	return block->disable_count;
-}
-
-bool mlxsw_sp_acl_block_is_egress_bound(const struct mlxsw_sp_acl_block *block)
-{
-	return block->egress_binding_count;
-}
-
-bool mlxsw_sp_acl_block_is_ingress_bound(const struct mlxsw_sp_acl_block *block)
-{
-	return block->ingress_binding_count;
-}
-
-bool mlxsw_sp_acl_block_is_mixed_bound(const struct mlxsw_sp_acl_block *block)
-{
-	return block->ingress_binding_count && block->egress_binding_count;
-}
-
 static bool
 mlxsw_sp_acl_ruleset_is_singular(const struct mlxsw_sp_acl_ruleset *ruleset)
 {
@@ -144,10 +94,9 @@ mlxsw_sp_acl_ruleset_is_singular(const struct mlxsw_sp_acl_ruleset *ruleset)
 	return ruleset->ref_count == 2;
 }
 
-static int
-mlxsw_sp_acl_ruleset_bind(struct mlxsw_sp *mlxsw_sp,
-			  struct mlxsw_sp_acl_block *block,
-			  struct mlxsw_sp_acl_block_binding *binding)
+int mlxsw_sp_acl_ruleset_bind(struct mlxsw_sp *mlxsw_sp,
+			      struct mlxsw_sp_flow_block *block,
+			      struct mlxsw_sp_flow_block_binding *binding)
 {
 	struct mlxsw_sp_acl_ruleset *ruleset = block->ruleset_zero;
 	const struct mlxsw_sp_acl_profile_ops *ops = ruleset->ht_key.ops;
@@ -156,10 +105,9 @@ mlxsw_sp_acl_ruleset_bind(struct mlxsw_sp *mlxsw_sp,
 				 binding->mlxsw_sp_port, binding->ingress);
 }
 
-static void
-mlxsw_sp_acl_ruleset_unbind(struct mlxsw_sp *mlxsw_sp,
-			    struct mlxsw_sp_acl_block *block,
-			    struct mlxsw_sp_acl_block_binding *binding)
+void mlxsw_sp_acl_ruleset_unbind(struct mlxsw_sp *mlxsw_sp,
+				 struct mlxsw_sp_flow_block *block,
+				 struct mlxsw_sp_flow_block_binding *binding)
 {
 	struct mlxsw_sp_acl_ruleset *ruleset = block->ruleset_zero;
 	const struct mlxsw_sp_acl_profile_ops *ops = ruleset->ht_key.ops;
@@ -168,18 +116,12 @@ mlxsw_sp_acl_ruleset_unbind(struct mlxsw_sp *mlxsw_sp,
 			    binding->mlxsw_sp_port, binding->ingress);
 }
 
-static bool
-mlxsw_sp_acl_ruleset_block_bound(const struct mlxsw_sp_acl_block *block)
-{
-	return block->ruleset_zero;
-}
-
 static int
 mlxsw_sp_acl_ruleset_block_bind(struct mlxsw_sp *mlxsw_sp,
 				struct mlxsw_sp_acl_ruleset *ruleset,
-				struct mlxsw_sp_acl_block *block)
+				struct mlxsw_sp_flow_block *block)
 {
-	struct mlxsw_sp_acl_block_binding *binding;
+	struct mlxsw_sp_flow_block_binding *binding;
 	int err;
 
 	block->ruleset_zero = ruleset;
@@ -202,122 +144,18 @@ mlxsw_sp_acl_ruleset_block_bind(struct mlxsw_sp *mlxsw_sp,
 static void
 mlxsw_sp_acl_ruleset_block_unbind(struct mlxsw_sp *mlxsw_sp,
 				  struct mlxsw_sp_acl_ruleset *ruleset,
-				  struct mlxsw_sp_acl_block *block)
+				  struct mlxsw_sp_flow_block *block)
 {
-	struct mlxsw_sp_acl_block_binding *binding;
+	struct mlxsw_sp_flow_block_binding *binding;
 
 	list_for_each_entry(binding, &block->binding_list, list)
 		mlxsw_sp_acl_ruleset_unbind(mlxsw_sp, block, binding);
 	block->ruleset_zero = NULL;
 }
 
-struct mlxsw_sp_acl_block *mlxsw_sp_acl_block_create(struct mlxsw_sp *mlxsw_sp,
-						     struct net *net)
-{
-	struct mlxsw_sp_acl_block *block;
-
-	block = kzalloc(sizeof(*block), GFP_KERNEL);
-	if (!block)
-		return NULL;
-	INIT_LIST_HEAD(&block->binding_list);
-	block->mlxsw_sp = mlxsw_sp;
-	block->net = net;
-	return block;
-}
-
-void mlxsw_sp_acl_block_destroy(struct mlxsw_sp_acl_block *block)
-{
-	WARN_ON(!list_empty(&block->binding_list));
-	kfree(block);
-}
-
-static struct mlxsw_sp_acl_block_binding *
-mlxsw_sp_acl_block_lookup(struct mlxsw_sp_acl_block *block,
-			  struct mlxsw_sp_port *mlxsw_sp_port, bool ingress)
-{
-	struct mlxsw_sp_acl_block_binding *binding;
-
-	list_for_each_entry(binding, &block->binding_list, list)
-		if (binding->mlxsw_sp_port == mlxsw_sp_port &&
-		    binding->ingress == ingress)
-			return binding;
-	return NULL;
-}
-
-int mlxsw_sp_acl_block_bind(struct mlxsw_sp *mlxsw_sp,
-			    struct mlxsw_sp_acl_block *block,
-			    struct mlxsw_sp_port *mlxsw_sp_port,
-			    bool ingress,
-			    struct netlink_ext_ack *extack)
-{
-	struct mlxsw_sp_acl_block_binding *binding;
-	int err;
-
-	if (WARN_ON(mlxsw_sp_acl_block_lookup(block, mlxsw_sp_port, ingress)))
-		return -EEXIST;
-
-	if (ingress && block->ingress_blocker_rule_count) {
-		NL_SET_ERR_MSG_MOD(extack, "Block cannot be bound to ingress because it contains unsupported rules");
-		return -EOPNOTSUPP;
-	}
-
-	if (!ingress && block->egress_blocker_rule_count) {
-		NL_SET_ERR_MSG_MOD(extack, "Block cannot be bound to egress because it contains unsupported rules");
-		return -EOPNOTSUPP;
-	}
-
-	binding = kzalloc(sizeof(*binding), GFP_KERNEL);
-	if (!binding)
-		return -ENOMEM;
-	binding->mlxsw_sp_port = mlxsw_sp_port;
-	binding->ingress = ingress;
-
-	if (mlxsw_sp_acl_ruleset_block_bound(block)) {
-		err = mlxsw_sp_acl_ruleset_bind(mlxsw_sp, block, binding);
-		if (err)
-			goto err_ruleset_bind;
-	}
-
-	if (ingress)
-		block->ingress_binding_count++;
-	else
-		block->egress_binding_count++;
-	list_add(&binding->list, &block->binding_list);
-	return 0;
-
-err_ruleset_bind:
-	kfree(binding);
-	return err;
-}
-
-int mlxsw_sp_acl_block_unbind(struct mlxsw_sp *mlxsw_sp,
-			      struct mlxsw_sp_acl_block *block,
-			      struct mlxsw_sp_port *mlxsw_sp_port,
-			      bool ingress)
-{
-	struct mlxsw_sp_acl_block_binding *binding;
-
-	binding = mlxsw_sp_acl_block_lookup(block, mlxsw_sp_port, ingress);
-	if (!binding)
-		return -ENOENT;
-
-	list_del(&binding->list);
-
-	if (ingress)
-		block->ingress_binding_count--;
-	else
-		block->egress_binding_count--;
-
-	if (mlxsw_sp_acl_ruleset_block_bound(block))
-		mlxsw_sp_acl_ruleset_unbind(mlxsw_sp, block, binding);
-
-	kfree(binding);
-	return 0;
-}
-
 static struct mlxsw_sp_acl_ruleset *
 mlxsw_sp_acl_ruleset_create(struct mlxsw_sp *mlxsw_sp,
-			    struct mlxsw_sp_acl_block *block, u32 chain_index,
+			    struct mlxsw_sp_flow_block *block, u32 chain_index,
 			    const struct mlxsw_sp_acl_profile_ops *ops,
 			    struct mlxsw_afk_element_usage *tmplt_elusage)
 {
@@ -388,7 +226,7 @@ static void mlxsw_sp_acl_ruleset_ref_dec(struct mlxsw_sp *mlxsw_sp,
 
 static struct mlxsw_sp_acl_ruleset *
 __mlxsw_sp_acl_ruleset_lookup(struct mlxsw_sp_acl *acl,
-			      struct mlxsw_sp_acl_block *block, u32 chain_index,
+			      struct mlxsw_sp_flow_block *block, u32 chain_index,
 			      const struct mlxsw_sp_acl_profile_ops *ops)
 {
 	struct mlxsw_sp_acl_ruleset_ht_key ht_key;
@@ -403,7 +241,7 @@ __mlxsw_sp_acl_ruleset_lookup(struct mlxsw_sp_acl *acl,
 
 struct mlxsw_sp_acl_ruleset *
 mlxsw_sp_acl_ruleset_lookup(struct mlxsw_sp *mlxsw_sp,
-			    struct mlxsw_sp_acl_block *block, u32 chain_index,
+			    struct mlxsw_sp_flow_block *block, u32 chain_index,
 			    enum mlxsw_sp_acl_profile profile)
 {
 	const struct mlxsw_sp_acl_profile_ops *ops;
@@ -421,7 +259,7 @@ mlxsw_sp_acl_ruleset_lookup(struct mlxsw_sp *mlxsw_sp,
 
 struct mlxsw_sp_acl_ruleset *
 mlxsw_sp_acl_ruleset_get(struct mlxsw_sp *mlxsw_sp,
-			 struct mlxsw_sp_acl_block *block, u32 chain_index,
+			 struct mlxsw_sp_flow_block *block, u32 chain_index,
 			 enum mlxsw_sp_acl_profile profile,
 			 struct mlxsw_afk_element_usage *tmplt_elusage)
 {
@@ -584,11 +422,11 @@ int mlxsw_sp_acl_rulei_act_fwd(struct mlxsw_sp *mlxsw_sp,
 
 int mlxsw_sp_acl_rulei_act_mirror(struct mlxsw_sp *mlxsw_sp,
 				  struct mlxsw_sp_acl_rule_info *rulei,
-				  struct mlxsw_sp_acl_block *block,
+				  struct mlxsw_sp_flow_block *block,
 				  struct net_device *out_dev,
 				  struct netlink_ext_ack *extack)
 {
-	struct mlxsw_sp_acl_block_binding *binding;
+	struct mlxsw_sp_flow_block_binding *binding;
 	struct mlxsw_sp_port *in_port;
 
 	if (!list_is_singular(&block->binding_list)) {
@@ -596,7 +434,7 @@ int mlxsw_sp_acl_rulei_act_mirror(struct mlxsw_sp *mlxsw_sp,
 		return -EOPNOTSUPP;
 	}
 	binding = list_first_entry(&block->binding_list,
-				   struct mlxsw_sp_acl_block_binding, list);
+				   struct mlxsw_sp_flow_block_binding, list);
 	in_port = binding->mlxsw_sp_port;
 
 	return mlxsw_afa_block_append_mirror(rulei->act_block,
@@ -818,7 +656,7 @@ int mlxsw_sp_acl_rule_add(struct mlxsw_sp *mlxsw_sp,
 {
 	struct mlxsw_sp_acl_ruleset *ruleset = rule->ruleset;
 	const struct mlxsw_sp_acl_profile_ops *ops = ruleset->ht_key.ops;
-	struct mlxsw_sp_acl_block *block = ruleset->ht_key.block;
+	struct mlxsw_sp_flow_block *block = ruleset->ht_key.block;
 	int err;
 
 	err = ops->rule_add(mlxsw_sp, ruleset->priv, rule->priv, rule->rulei);
@@ -862,18 +700,17 @@ void mlxsw_sp_acl_rule_del(struct mlxsw_sp *mlxsw_sp,
 {
 	struct mlxsw_sp_acl_ruleset *ruleset = rule->ruleset;
 	const struct mlxsw_sp_acl_profile_ops *ops = ruleset->ht_key.ops;
-	struct mlxsw_sp_acl_block *block = ruleset->ht_key.block;
+	struct mlxsw_sp_flow_block *block = ruleset->ht_key.block;
 
 	block->egress_blocker_rule_count -= rule->rulei->egress_bind_blocker;
 	block->ingress_blocker_rule_count -= rule->rulei->ingress_bind_blocker;
-	ruleset->ht_key.block->rule_count--;
+	block->rule_count--;
 	mutex_lock(&mlxsw_sp->acl->rules_lock);
 	list_del(&rule->list);
 	mutex_unlock(&mlxsw_sp->acl->rules_lock);
 	if (!ruleset->ht_key.chain_index &&
 	    mlxsw_sp_acl_ruleset_is_singular(ruleset))
-		mlxsw_sp_acl_ruleset_block_unbind(mlxsw_sp, ruleset,
-						  ruleset->ht_key.block);
+		mlxsw_sp_acl_ruleset_block_unbind(mlxsw_sp, ruleset, block);
 	rhashtable_remove_fast(&ruleset->rule_ht, &rule->ht_node,
 			       mlxsw_sp_acl_rule_ht_params);
 	ops->rule_del(mlxsw_sp, rule->priv);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_flow.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flow.c
new file mode 100644
index 000000000000..ecab581ff956
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flow.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/* Copyright (c) 2017-2020 Mellanox Technologies. All rights reserved */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <net/net_namespace.h>
+
+#include "spectrum.h"
+
+struct mlxsw_sp_flow_block *
+mlxsw_sp_flow_block_create(struct mlxsw_sp *mlxsw_sp, struct net *net)
+{
+	struct mlxsw_sp_flow_block *block;
+
+	block = kzalloc(sizeof(*block), GFP_KERNEL);
+	if (!block)
+		return NULL;
+	INIT_LIST_HEAD(&block->binding_list);
+	INIT_LIST_HEAD(&block->mall_list);
+	block->mlxsw_sp = mlxsw_sp;
+	block->net = net;
+	return block;
+}
+
+void mlxsw_sp_flow_block_destroy(struct mlxsw_sp_flow_block *block)
+{
+	WARN_ON(!list_empty(&block->binding_list));
+	kfree(block);
+}
+
+static struct mlxsw_sp_flow_block_binding *
+mlxsw_sp_flow_block_lookup(struct mlxsw_sp_flow_block *block,
+			   struct mlxsw_sp_port *mlxsw_sp_port, bool ingress)
+{
+	struct mlxsw_sp_flow_block_binding *binding;
+
+	list_for_each_entry(binding, &block->binding_list, list)
+		if (binding->mlxsw_sp_port == mlxsw_sp_port &&
+		    binding->ingress == ingress)
+			return binding;
+	return NULL;
+}
+
+static bool
+mlxsw_sp_flow_block_ruleset_bound(const struct mlxsw_sp_flow_block *block)
+{
+	return block->ruleset_zero;
+}
+
+static int mlxsw_sp_flow_block_bind(struct mlxsw_sp *mlxsw_sp,
+				    struct mlxsw_sp_flow_block *block,
+				    struct mlxsw_sp_port *mlxsw_sp_port,
+				    bool ingress,
+				    struct netlink_ext_ack *extack)
+{
+	struct mlxsw_sp_flow_block_binding *binding;
+	int err;
+
+	if (WARN_ON(mlxsw_sp_flow_block_lookup(block, mlxsw_sp_port, ingress)))
+		return -EEXIST;
+
+	if (ingress && block->ingress_blocker_rule_count) {
+		NL_SET_ERR_MSG_MOD(extack, "Block cannot be bound to ingress because it contains unsupported rules");
+		return -EOPNOTSUPP;
+	}
+
+	if (!ingress && block->egress_blocker_rule_count) {
+		NL_SET_ERR_MSG_MOD(extack, "Block cannot be bound to egress because it contains unsupported rules");
+		return -EOPNOTSUPP;
+	}
+
+	err = mlxsw_sp_mall_port_bind(block, mlxsw_sp_port);
+	if (err)
+		return err;
+
+	binding = kzalloc(sizeof(*binding), GFP_KERNEL);
+	if (!binding) {
+		err = -ENOMEM;
+		goto err_binding_alloc;
+	}
+	binding->mlxsw_sp_port = mlxsw_sp_port;
+	binding->ingress = ingress;
+
+	if (mlxsw_sp_flow_block_ruleset_bound(block)) {
+		err = mlxsw_sp_acl_ruleset_bind(mlxsw_sp, block, binding);
+		if (err)
+			goto err_ruleset_bind;
+	}
+
+	if (ingress)
+		block->ingress_binding_count++;
+	else
+		block->egress_binding_count++;
+	list_add(&binding->list, &block->binding_list);
+	return 0;
+
+err_ruleset_bind:
+	kfree(binding);
+err_binding_alloc:
+	mlxsw_sp_mall_port_unbind(block, mlxsw_sp_port);
+
+	return err;
+}
+
+static int mlxsw_sp_flow_block_unbind(struct mlxsw_sp *mlxsw_sp,
+				      struct mlxsw_sp_flow_block *block,
+				      struct mlxsw_sp_port *mlxsw_sp_port,
+				      bool ingress)
+{
+	struct mlxsw_sp_flow_block_binding *binding;
+
+	binding = mlxsw_sp_flow_block_lookup(block, mlxsw_sp_port, ingress);
+	if (!binding)
+		return -ENOENT;
+
+	list_del(&binding->list);
+
+	if (ingress)
+		block->ingress_binding_count--;
+	else
+		block->egress_binding_count--;
+
+	if (mlxsw_sp_flow_block_ruleset_bound(block))
+		mlxsw_sp_acl_ruleset_unbind(mlxsw_sp, block, binding);
+
+	kfree(binding);
+
+	mlxsw_sp_mall_port_unbind(block, mlxsw_sp_port);
+
+	return 0;
+}
+
+static int mlxsw_sp_flow_block_mall_cb(struct mlxsw_sp_flow_block *flow_block,
+				       struct tc_cls_matchall_offload *f)
+{
+	switch (f->command) {
+	case TC_CLSMATCHALL_REPLACE:
+		return mlxsw_sp_mall_replace(flow_block, f);
+	case TC_CLSMATCHALL_DESTROY:
+		mlxsw_sp_mall_destroy(flow_block, f);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int mlxsw_sp_flow_block_flower_cb(struct mlxsw_sp_flow_block *flow_block,
+					 struct flow_cls_offload *f)
+{
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_flow_block_mlxsw_sp(flow_block);
+
+	switch (f->command) {
+	case FLOW_CLS_REPLACE:
+		return mlxsw_sp_flower_replace(mlxsw_sp, flow_block, f);
+	case FLOW_CLS_DESTROY:
+		mlxsw_sp_flower_destroy(mlxsw_sp, flow_block, f);
+		return 0;
+	case FLOW_CLS_STATS:
+		return mlxsw_sp_flower_stats(mlxsw_sp, flow_block, f);
+	case FLOW_CLS_TMPLT_CREATE:
+		return mlxsw_sp_flower_tmplt_create(mlxsw_sp, flow_block, f);
+	case FLOW_CLS_TMPLT_DESTROY:
+		mlxsw_sp_flower_tmplt_destroy(mlxsw_sp, flow_block, f);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int mlxsw_sp_flow_block_cb(enum tc_setup_type type,
+				  void *type_data, void *cb_priv)
+{
+	struct mlxsw_sp_flow_block *flow_block = cb_priv;
+
+	if (mlxsw_sp_flow_block_disabled(flow_block))
+		return -EOPNOTSUPP;
+
+	switch (type) {
+	case TC_SETUP_CLSMATCHALL:
+		return mlxsw_sp_flow_block_mall_cb(flow_block, type_data);
+	case TC_SETUP_CLSFLOWER:
+		return mlxsw_sp_flow_block_flower_cb(flow_block, type_data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void mlxsw_sp_tc_block_release(void *cb_priv)
+{
+	struct mlxsw_sp_flow_block *flow_block = cb_priv;
+
+	mlxsw_sp_flow_block_destroy(flow_block);
+}
+
+static LIST_HEAD(mlxsw_sp_block_cb_list);
+
+static int mlxsw_sp_setup_tc_block_bind(struct mlxsw_sp_port *mlxsw_sp_port,
+					struct flow_block_offload *f,
+					bool ingress)
+{
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+	struct mlxsw_sp_flow_block *flow_block;
+	struct flow_block_cb *block_cb;
+	bool register_block = false;
+	int err;
+
+	block_cb = flow_block_cb_lookup(f->block, mlxsw_sp_flow_block_cb,
+					mlxsw_sp);
+	if (!block_cb) {
+		flow_block = mlxsw_sp_flow_block_create(mlxsw_sp, f->net);
+		if (!flow_block)
+			return -ENOMEM;
+		block_cb = flow_block_cb_alloc(mlxsw_sp_flow_block_cb,
+					       mlxsw_sp, flow_block,
+					       mlxsw_sp_tc_block_release);
+		if (IS_ERR(block_cb)) {
+			mlxsw_sp_flow_block_destroy(flow_block);
+			err = PTR_ERR(block_cb);
+			goto err_cb_register;
+		}
+		register_block = true;
+	} else {
+		flow_block = flow_block_cb_priv(block_cb);
+	}
+	flow_block_cb_incref(block_cb);
+	err = mlxsw_sp_flow_block_bind(mlxsw_sp, flow_block,
+				       mlxsw_sp_port, ingress, f->extack);
+	if (err)
+		goto err_block_bind;
+
+	if (ingress)
+		mlxsw_sp_port->ing_flow_block = flow_block;
+	else
+		mlxsw_sp_port->eg_flow_block = flow_block;
+
+	if (register_block) {
+		flow_block_cb_add(block_cb, f);
+		list_add_tail(&block_cb->driver_list, &mlxsw_sp_block_cb_list);
+	}
+
+	return 0;
+
+err_block_bind:
+	if (!flow_block_cb_decref(block_cb))
+		flow_block_cb_free(block_cb);
+err_cb_register:
+	return err;
+}
+
+static void mlxsw_sp_setup_tc_block_unbind(struct mlxsw_sp_port *mlxsw_sp_port,
+					   struct flow_block_offload *f,
+					   bool ingress)
+{
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+	struct mlxsw_sp_flow_block *flow_block;
+	struct flow_block_cb *block_cb;
+	int err;
+
+	block_cb = flow_block_cb_lookup(f->block, mlxsw_sp_flow_block_cb,
+					mlxsw_sp);
+	if (!block_cb)
+		return;
+
+	if (ingress)
+		mlxsw_sp_port->ing_flow_block = NULL;
+	else
+		mlxsw_sp_port->eg_flow_block = NULL;
+
+	flow_block = flow_block_cb_priv(block_cb);
+	err = mlxsw_sp_flow_block_unbind(mlxsw_sp, flow_block,
+					 mlxsw_sp_port, ingress);
+	if (!err && !flow_block_cb_decref(block_cb)) {
+		flow_block_cb_remove(block_cb, f);
+		list_del(&block_cb->driver_list);
+	}
+}
+
+int mlxsw_sp_setup_tc_block(struct mlxsw_sp_port *mlxsw_sp_port,
+			    struct flow_block_offload *f)
+{
+	bool ingress;
+
+	if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS)
+		ingress = true;
+	else if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_EGRESS)
+		ingress = false;
+	else
+		return -EOPNOTSUPP;
+
+	f->driver_block_list = &mlxsw_sp_block_cb_list;
+
+	switch (f->command) {
+	case FLOW_BLOCK_BIND:
+		return mlxsw_sp_setup_tc_block_bind(mlxsw_sp_port, f, ingress);
+	case FLOW_BLOCK_UNBIND:
+		mlxsw_sp_setup_tc_block_unbind(mlxsw_sp_port, f, ingress);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c
index 51117a5a6bbf..89c2e9820e95 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c
@@ -15,7 +15,7 @@
 #include "core_acl_flex_keys.h"
 
 static int mlxsw_sp_flower_parse_actions(struct mlxsw_sp *mlxsw_sp,
-					 struct mlxsw_sp_acl_block *block,
+					 struct mlxsw_sp_flow_block *block,
 					 struct mlxsw_sp_acl_rule_info *rulei,
 					 struct flow_action *flow_action,
 					 struct netlink_ext_ack *extack)
@@ -53,11 +53,11 @@ static int mlxsw_sp_flower_parse_actions(struct mlxsw_sp *mlxsw_sp,
 		case FLOW_ACTION_DROP: {
 			bool ingress;
 
-			if (mlxsw_sp_acl_block_is_mixed_bound(block)) {
+			if (mlxsw_sp_flow_block_is_mixed_bound(block)) {
 				NL_SET_ERR_MSG_MOD(extack, "Drop action is not supported when block is bound to ingress and egress");
 				return -EOPNOTSUPP;
 			}
-			ingress = mlxsw_sp_acl_block_is_ingress_bound(block);
+			ingress = mlxsw_sp_flow_block_is_ingress_bound(block);
 			err = mlxsw_sp_acl_rulei_act_drop(rulei, ingress,
 							  act->cookie, extack);
 			if (err) {
@@ -106,7 +106,7 @@ static int mlxsw_sp_flower_parse_actions(struct mlxsw_sp *mlxsw_sp,
 			struct mlxsw_sp_fid *fid;
 			u16 fid_index;
 
-			if (mlxsw_sp_acl_block_is_egress_bound(block)) {
+			if (mlxsw_sp_flow_block_is_egress_bound(block)) {
 				NL_SET_ERR_MSG_MOD(extack, "Redirect action is not supported on egress");
 				return -EOPNOTSUPP;
 			}
@@ -190,7 +190,7 @@ static int mlxsw_sp_flower_parse_actions(struct mlxsw_sp *mlxsw_sp,
 
 static int mlxsw_sp_flower_parse_meta(struct mlxsw_sp_acl_rule_info *rulei,
 				      struct flow_cls_offload *f,
-				      struct mlxsw_sp_acl_block *block)
+				      struct mlxsw_sp_flow_block *block)
 {
 	struct flow_rule *rule = flow_cls_offload_flow_rule(f);
 	struct mlxsw_sp_port *mlxsw_sp_port;
@@ -371,7 +371,7 @@ static int mlxsw_sp_flower_parse_ip(struct mlxsw_sp *mlxsw_sp,
 }
 
 static int mlxsw_sp_flower_parse(struct mlxsw_sp *mlxsw_sp,
-				 struct mlxsw_sp_acl_block *block,
+				 struct mlxsw_sp_flow_block *block,
 				 struct mlxsw_sp_acl_rule_info *rulei,
 				 struct flow_cls_offload *f)
 {
@@ -460,7 +460,7 @@ static int mlxsw_sp_flower_parse(struct mlxsw_sp *mlxsw_sp,
 		struct flow_match_vlan match;
 
 		flow_rule_match_vlan(rule, &match);
-		if (mlxsw_sp_acl_block_is_egress_bound(block)) {
+		if (mlxsw_sp_flow_block_is_egress_bound(block)) {
 			NL_SET_ERR_MSG_MOD(f->common.extack, "vlan_id key is not supported on egress");
 			return -EOPNOTSUPP;
 		}
@@ -505,7 +505,7 @@ static int mlxsw_sp_flower_parse(struct mlxsw_sp *mlxsw_sp,
 }
 
 int mlxsw_sp_flower_replace(struct mlxsw_sp *mlxsw_sp,
-			    struct mlxsw_sp_acl_block *block,
+			    struct mlxsw_sp_flow_block *block,
 			    struct flow_cls_offload *f)
 {
 	struct mlxsw_sp_acl_rule_info *rulei;
@@ -552,7 +552,7 @@ int mlxsw_sp_flower_replace(struct mlxsw_sp *mlxsw_sp,
 }
 
 void mlxsw_sp_flower_destroy(struct mlxsw_sp *mlxsw_sp,
-			     struct mlxsw_sp_acl_block *block,
+			     struct mlxsw_sp_flow_block *block,
 			     struct flow_cls_offload *f)
 {
 	struct mlxsw_sp_acl_ruleset *ruleset;
@@ -574,7 +574,7 @@ void mlxsw_sp_flower_destroy(struct mlxsw_sp *mlxsw_sp,
 }
 
 int mlxsw_sp_flower_stats(struct mlxsw_sp *mlxsw_sp,
-			  struct mlxsw_sp_acl_block *block,
+			  struct mlxsw_sp_flow_block *block,
 			  struct flow_cls_offload *f)
 {
 	enum flow_action_hw_stats used_hw_stats = FLOW_ACTION_HW_STATS_DISABLED;
@@ -611,7 +611,7 @@ int mlxsw_sp_flower_stats(struct mlxsw_sp *mlxsw_sp,
 }
 
 int mlxsw_sp_flower_tmplt_create(struct mlxsw_sp *mlxsw_sp,
-				 struct mlxsw_sp_acl_block *block,
+				 struct mlxsw_sp_flow_block *block,
 				 struct flow_cls_offload *f)
 {
 	struct mlxsw_sp_acl_ruleset *ruleset;
@@ -632,7 +632,7 @@ int mlxsw_sp_flower_tmplt_create(struct mlxsw_sp *mlxsw_sp,
 }
 
 void mlxsw_sp_flower_tmplt_destroy(struct mlxsw_sp *mlxsw_sp,
-				   struct mlxsw_sp_acl_block *block,
+				   struct mlxsw_sp_flow_block *block,
 				   struct flow_cls_offload *f)
 {
 	struct mlxsw_sp_acl_ruleset *ruleset;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_matchall.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_matchall.c
new file mode 100644
index 000000000000..889da63072be
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_matchall.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/* Copyright (c) 2017-2020 Mellanox Technologies. All rights reserved */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <net/flow_offload.h>
+
+#include "spectrum.h"
+#include "spectrum_span.h"
+#include "reg.h"
+
+enum mlxsw_sp_mall_action_type {
+	MLXSW_SP_MALL_ACTION_TYPE_MIRROR,
+	MLXSW_SP_MALL_ACTION_TYPE_SAMPLE,
+};
+
+struct mlxsw_sp_mall_mirror_entry {
+	const struct net_device *to_dev;
+	int span_id;
+};
+
+struct mlxsw_sp_mall_entry {
+	struct list_head list;
+	unsigned long cookie;
+	enum mlxsw_sp_mall_action_type type;
+	bool ingress;
+	union {
+		struct mlxsw_sp_mall_mirror_entry mirror;
+		struct mlxsw_sp_port_sample sample;
+	};
+	struct rcu_head rcu;
+};
+
+static struct mlxsw_sp_mall_entry *
+mlxsw_sp_mall_entry_find(struct mlxsw_sp_flow_block *block, unsigned long cookie)
+{
+	struct mlxsw_sp_mall_entry *mall_entry;
+
+	list_for_each_entry(mall_entry, &block->mall_list, list)
+		if (mall_entry->cookie == cookie)
+			return mall_entry;
+
+	return NULL;
+}
+
+static int
+mlxsw_sp_mall_port_mirror_add(struct mlxsw_sp_port *mlxsw_sp_port,
+			      struct mlxsw_sp_mall_entry *mall_entry)
+{
+	enum mlxsw_sp_span_type span_type;
+
+	if (!mall_entry->mirror.to_dev) {
+		netdev_err(mlxsw_sp_port->dev, "Could not find requested device\n");
+		return -EINVAL;
+	}
+
+	span_type = mall_entry->ingress ? MLXSW_SP_SPAN_INGRESS :
+					  MLXSW_SP_SPAN_EGRESS;
+	return mlxsw_sp_span_mirror_add(mlxsw_sp_port,
+					mall_entry->mirror.to_dev,
+					span_type, true,
+					&mall_entry->mirror.span_id);
+}
+
+static void
+mlxsw_sp_mall_port_mirror_del(struct mlxsw_sp_port *mlxsw_sp_port,
+			      struct mlxsw_sp_mall_entry *mall_entry)
+{
+	enum mlxsw_sp_span_type span_type;
+
+	span_type = mall_entry->ingress ? MLXSW_SP_SPAN_INGRESS :
+					  MLXSW_SP_SPAN_EGRESS;
+	mlxsw_sp_span_mirror_del(mlxsw_sp_port, mall_entry->mirror.span_id,
+				 span_type, true);
+}
+
+static int mlxsw_sp_mall_port_sample_set(struct mlxsw_sp_port *mlxsw_sp_port,
+					 bool enable, u32 rate)
+{
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+	char mpsc_pl[MLXSW_REG_MPSC_LEN];
+
+	mlxsw_reg_mpsc_pack(mpsc_pl, mlxsw_sp_port->local_port, enable, rate);
+	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(mpsc), mpsc_pl);
+}
+
+static int
+mlxsw_sp_mall_port_sample_add(struct mlxsw_sp_port *mlxsw_sp_port,
+			      struct mlxsw_sp_mall_entry *mall_entry)
+{
+	int err;
+
+	if (rtnl_dereference(mlxsw_sp_port->sample)) {
+		netdev_err(mlxsw_sp_port->dev, "sample already active\n");
+		return -EEXIST;
+	}
+	rcu_assign_pointer(mlxsw_sp_port->sample, &mall_entry->sample);
+
+	err = mlxsw_sp_mall_port_sample_set(mlxsw_sp_port, true,
+					    mall_entry->sample.rate);
+	if (err)
+		goto err_port_sample_set;
+	return 0;
+
+err_port_sample_set:
+	RCU_INIT_POINTER(mlxsw_sp_port->sample, NULL);
+	return err;
+}
+
+static void
+mlxsw_sp_mall_port_sample_del(struct mlxsw_sp_port *mlxsw_sp_port)
+{
+	if (!mlxsw_sp_port->sample)
+		return;
+
+	mlxsw_sp_mall_port_sample_set(mlxsw_sp_port, false, 1);
+	RCU_INIT_POINTER(mlxsw_sp_port->sample, NULL);
+}
+
+static int
+mlxsw_sp_mall_port_rule_add(struct mlxsw_sp_port *mlxsw_sp_port,
+			    struct mlxsw_sp_mall_entry *mall_entry)
+{
+	switch (mall_entry->type) {
+	case MLXSW_SP_MALL_ACTION_TYPE_MIRROR:
+		return mlxsw_sp_mall_port_mirror_add(mlxsw_sp_port, mall_entry);
+	case MLXSW_SP_MALL_ACTION_TYPE_SAMPLE:
+		return mlxsw_sp_mall_port_sample_add(mlxsw_sp_port, mall_entry);
+	default:
+		WARN_ON(1);
+		return -EINVAL;
+	}
+}
+
+static void
+mlxsw_sp_mall_port_rule_del(struct mlxsw_sp_port *mlxsw_sp_port,
+			    struct mlxsw_sp_mall_entry *mall_entry)
+{
+	switch (mall_entry->type) {
+	case MLXSW_SP_MALL_ACTION_TYPE_MIRROR:
+		mlxsw_sp_mall_port_mirror_del(mlxsw_sp_port, mall_entry);
+		break;
+	case MLXSW_SP_MALL_ACTION_TYPE_SAMPLE:
+		mlxsw_sp_mall_port_sample_del(mlxsw_sp_port);
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
+
+int mlxsw_sp_mall_replace(struct mlxsw_sp_flow_block *block,
+			  struct tc_cls_matchall_offload *f)
+{
+	struct mlxsw_sp_flow_block_binding *binding;
+	struct mlxsw_sp_mall_entry *mall_entry;
+	__be16 protocol = f->common.protocol;
+	struct flow_action_entry *act;
+	int err;
+
+	if (!flow_offload_has_one_action(&f->rule->action)) {
+		NL_SET_ERR_MSG(f->common.extack, "Only singular actions are supported");
+		return -EOPNOTSUPP;
+	}
+
+	if (f->common.chain_index) {
+		NL_SET_ERR_MSG(f->common.extack, "Only chain 0 is supported");
+		return -EOPNOTSUPP;
+	}
+
+	if (mlxsw_sp_flow_block_is_mixed_bound(block)) {
+		NL_SET_ERR_MSG(f->common.extack, "Only not mixed bound blocks are supported");
+		return -EOPNOTSUPP;
+	}
+
+	mall_entry = kzalloc(sizeof(*mall_entry), GFP_KERNEL);
+	if (!mall_entry)
+		return -ENOMEM;
+	mall_entry->cookie = f->cookie;
+	mall_entry->ingress = mlxsw_sp_flow_block_is_ingress_bound(block);
+
+	act = &f->rule->action.entries[0];
+
+	if (act->id == FLOW_ACTION_MIRRED && protocol == htons(ETH_P_ALL)) {
+		mall_entry->type = MLXSW_SP_MALL_ACTION_TYPE_MIRROR;
+		mall_entry->mirror.to_dev = act->dev;
+	} else if (act->id == FLOW_ACTION_SAMPLE &&
+		   protocol == htons(ETH_P_ALL)) {
+		if (act->sample.rate > MLXSW_REG_MPSC_RATE_MAX) {
+			NL_SET_ERR_MSG(f->common.extack, "Sample rate not supported");
+			err = -EOPNOTSUPP;
+			goto errout;
+		}
+		mall_entry->type = MLXSW_SP_MALL_ACTION_TYPE_SAMPLE;
+		mall_entry->sample.psample_group = act->sample.psample_group;
+		mall_entry->sample.truncate = act->sample.truncate;
+		mall_entry->sample.trunc_size = act->sample.trunc_size;
+		mall_entry->sample.rate = act->sample.rate;
+	} else {
+		err = -EOPNOTSUPP;
+		goto errout;
+	}
+
+	list_for_each_entry(binding, &block->binding_list, list) {
+		err = mlxsw_sp_mall_port_rule_add(binding->mlxsw_sp_port,
+						  mall_entry);
+		if (err)
+			goto rollback;
+	}
+
+	block->rule_count++;
+	if (mall_entry->ingress)
+		block->egress_blocker_rule_count++;
+	else
+		block->ingress_blocker_rule_count++;
+	list_add_tail(&mall_entry->list, &block->mall_list);
+	return 0;
+
+rollback:
+	list_for_each_entry_continue_reverse(binding, &block->binding_list,
+					     list)
+		mlxsw_sp_mall_port_rule_del(binding->mlxsw_sp_port, mall_entry);
+errout:
+	kfree(mall_entry);
+	return err;
+}
+
+void mlxsw_sp_mall_destroy(struct mlxsw_sp_flow_block *block,
+			   struct tc_cls_matchall_offload *f)
+{
+	struct mlxsw_sp_flow_block_binding *binding;
+	struct mlxsw_sp_mall_entry *mall_entry;
+
+	mall_entry = mlxsw_sp_mall_entry_find(block, f->cookie);
+	if (!mall_entry) {
+		NL_SET_ERR_MSG(f->common.extack, "Entry not found");
+		return;
+	}
+
+	list_del(&mall_entry->list);
+	if (mall_entry->ingress)
+		block->egress_blocker_rule_count--;
+	else
+		block->ingress_blocker_rule_count--;
+	block->rule_count--;
+	list_for_each_entry(binding, &block->binding_list, list)
+		mlxsw_sp_mall_port_rule_del(binding->mlxsw_sp_port, mall_entry);
+	kfree_rcu(mall_entry, rcu); /* sample RX packets may be in-flight */
+}
+
+int mlxsw_sp_mall_port_bind(struct mlxsw_sp_flow_block *block,
+			    struct mlxsw_sp_port *mlxsw_sp_port)
+{
+	struct mlxsw_sp_mall_entry *mall_entry;
+	int err;
+
+	list_for_each_entry(mall_entry, &block->mall_list, list) {
+		err = mlxsw_sp_mall_port_rule_add(mlxsw_sp_port, mall_entry);
+		if (err)
+			goto rollback;
+	}
+	return 0;
+
+rollback:
+	list_for_each_entry_continue_reverse(mall_entry, &block->mall_list,
+					     list)
+		mlxsw_sp_mall_port_rule_del(mlxsw_sp_port, mall_entry);
+	return err;
+}
+
+void mlxsw_sp_mall_port_unbind(struct mlxsw_sp_flow_block *block,
+			       struct mlxsw_sp_port *mlxsw_sp_port)
+{
+	struct mlxsw_sp_mall_entry *mall_entry;
+
+	list_for_each_entry(mall_entry, &block->mall_list, list)
+		mlxsw_sp_mall_port_rule_del(mlxsw_sp_port, mall_entry);
+}
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
index d5bca1be3ef5..71aee4914619 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
@@ -2999,6 +2999,7 @@ static u32 mlxsw_sp_nexthop_group_hash_obj(const void *data, u32 len, u32 seed)
 		for (i = 0; i < nh_grp->count; i++) {
 			nh = &nh_grp->nexthops[i];
 			val ^= jhash(&nh->ifindex, sizeof(nh->ifindex), seed);
+			val ^= jhash(&nh->gw_addr, sizeof(nh->gw_addr), seed);
 		}
 		return jhash(&val, sizeof(val), seed);
 	default:
@@ -3012,11 +3013,14 @@ mlxsw_sp_nexthop6_group_hash(struct mlxsw_sp_fib6_entry *fib6_entry, u32 seed)
 {
 	unsigned int val = fib6_entry->nrt6;
 	struct mlxsw_sp_rt6 *mlxsw_sp_rt6;
-	struct net_device *dev;
 
 	list_for_each_entry(mlxsw_sp_rt6, &fib6_entry->rt6_list, list) {
-		dev = mlxsw_sp_rt6->rt->fib6_nh->fib_nh_dev;
+		struct fib6_nh *fib6_nh = mlxsw_sp_rt6->rt->fib6_nh;
+		struct net_device *dev = fib6_nh->fib_nh_dev;
+		struct in6_addr *gw = &fib6_nh->fib_nh_gw6;
+
 		val ^= jhash(&dev->ifindex, sizeof(dev->ifindex), seed);
+		val ^= jhash(gw, sizeof(*gw), seed);
 	}
 
 	return jhash(&val, sizeof(val), seed);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
index 9fb2e9d93929..ae3c8a1e9a43 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
@@ -3,6 +3,7 @@
 
 #include <linux/if_bridge.h>
 #include <linux/list.h>
+#include <linux/refcount.h>
 #include <linux/rtnetlink.h>
 #include <linux/workqueue.h>
 #include <net/arp.h>
@@ -21,7 +22,7 @@ struct mlxsw_sp_span {
 	struct mlxsw_sp *mlxsw_sp;
 	atomic_t active_entries_count;
 	int entries_count;
-	struct mlxsw_sp_span_entry entries[0];
+	struct mlxsw_sp_span_entry entries[];
 };
 
 static void mlxsw_sp_span_respin_work(struct work_struct *work);
@@ -130,7 +131,7 @@ mlxsw_sp_span_entry_phys_deconfigure(struct mlxsw_sp_span_entry *span_entry)
 static const
 struct mlxsw_sp_span_entry_ops mlxsw_sp_span_entry_ops_phys = {
 	.can_handle = mlxsw_sp_port_dev_check,
-	.parms = mlxsw_sp_span_entry_phys_parms,
+	.parms_set = mlxsw_sp_span_entry_phys_parms,
 	.configure = mlxsw_sp_span_entry_phys_configure,
 	.deconfigure = mlxsw_sp_span_entry_phys_deconfigure,
 };
@@ -418,7 +419,7 @@ mlxsw_sp_span_entry_gretap4_deconfigure(struct mlxsw_sp_span_entry *span_entry)
 
 static const struct mlxsw_sp_span_entry_ops mlxsw_sp_span_entry_ops_gretap4 = {
 	.can_handle = netif_is_gretap,
-	.parms = mlxsw_sp_span_entry_gretap4_parms,
+	.parms_set = mlxsw_sp_span_entry_gretap4_parms,
 	.configure = mlxsw_sp_span_entry_gretap4_configure,
 	.deconfigure = mlxsw_sp_span_entry_gretap4_deconfigure,
 };
@@ -519,7 +520,7 @@ mlxsw_sp_span_entry_gretap6_deconfigure(struct mlxsw_sp_span_entry *span_entry)
 static const
 struct mlxsw_sp_span_entry_ops mlxsw_sp_span_entry_ops_gretap6 = {
 	.can_handle = netif_is_ip6gretap,
-	.parms = mlxsw_sp_span_entry_gretap6_parms,
+	.parms_set = mlxsw_sp_span_entry_gretap6_parms,
 	.configure = mlxsw_sp_span_entry_gretap6_configure,
 	.deconfigure = mlxsw_sp_span_entry_gretap6_deconfigure,
 };
@@ -575,7 +576,7 @@ mlxsw_sp_span_entry_vlan_deconfigure(struct mlxsw_sp_span_entry *span_entry)
 static const
 struct mlxsw_sp_span_entry_ops mlxsw_sp_span_entry_ops_vlan = {
 	.can_handle = mlxsw_sp_span_vlan_can_handle,
-	.parms = mlxsw_sp_span_entry_vlan_parms,
+	.parms_set = mlxsw_sp_span_entry_vlan_parms,
 	.configure = mlxsw_sp_span_entry_vlan_configure,
 	.deconfigure = mlxsw_sp_span_entry_vlan_deconfigure,
 };
@@ -612,7 +613,7 @@ mlxsw_sp_span_entry_nop_deconfigure(struct mlxsw_sp_span_entry *span_entry)
 }
 
 static const struct mlxsw_sp_span_entry_ops mlxsw_sp_span_entry_ops_nop = {
-	.parms = mlxsw_sp_span_entry_nop_parms,
+	.parms_set = mlxsw_sp_span_entry_nop_parms,
 	.configure = mlxsw_sp_span_entry_nop_configure,
 	.deconfigure = mlxsw_sp_span_entry_nop_deconfigure,
 };
@@ -622,18 +623,27 @@ mlxsw_sp_span_entry_configure(struct mlxsw_sp *mlxsw_sp,
 			      struct mlxsw_sp_span_entry *span_entry,
 			      struct mlxsw_sp_span_parms sparms)
 {
-	if (sparms.dest_port) {
-		if (sparms.dest_port->mlxsw_sp != mlxsw_sp) {
-			netdev_err(span_entry->to_dev, "Cannot mirror to %s, which belongs to a different mlxsw instance",
-				   sparms.dest_port->dev->name);
-			sparms.dest_port = NULL;
-		} else if (span_entry->ops->configure(span_entry, sparms)) {
-			netdev_err(span_entry->to_dev, "Failed to offload mirror to %s",
-				   sparms.dest_port->dev->name);
-			sparms.dest_port = NULL;
-		}
+	int err;
+
+	if (!sparms.dest_port)
+		goto set_parms;
+
+	if (sparms.dest_port->mlxsw_sp != mlxsw_sp) {
+		netdev_err(span_entry->to_dev, "Cannot mirror to %s, which belongs to a different mlxsw instance",
+			   sparms.dest_port->dev->name);
+		sparms.dest_port = NULL;
+		goto set_parms;
 	}
 
+	err = span_entry->ops->configure(span_entry, sparms);
+	if (err) {
+		netdev_err(span_entry->to_dev, "Failed to offload mirror to %s",
+			   sparms.dest_port->dev->name);
+		sparms.dest_port = NULL;
+		goto set_parms;
+	}
+
+set_parms:
 	span_entry->parms = sparms;
 }
 
@@ -655,7 +665,7 @@ mlxsw_sp_span_entry_create(struct mlxsw_sp *mlxsw_sp,
 
 	/* find a free entry to use */
 	for (i = 0; i < mlxsw_sp->span->entries_count; i++) {
-		if (!mlxsw_sp->span->entries[i].ref_count) {
+		if (!refcount_read(&mlxsw_sp->span->entries[i].ref_count)) {
 			span_entry = &mlxsw_sp->span->entries[i];
 			break;
 		}
@@ -665,7 +675,7 @@ mlxsw_sp_span_entry_create(struct mlxsw_sp *mlxsw_sp,
 
 	atomic_inc(&mlxsw_sp->span->active_entries_count);
 	span_entry->ops = ops;
-	span_entry->ref_count = 1;
+	refcount_set(&span_entry->ref_count, 1);
 	span_entry->to_dev = to_dev;
 	mlxsw_sp_span_entry_configure(mlxsw_sp, span_entry, sparms);
 
@@ -688,7 +698,7 @@ mlxsw_sp_span_entry_find_by_port(struct mlxsw_sp *mlxsw_sp,
 	for (i = 0; i < mlxsw_sp->span->entries_count; i++) {
 		struct mlxsw_sp_span_entry *curr = &mlxsw_sp->span->entries[i];
 
-		if (curr->ref_count && curr->to_dev == to_dev)
+		if (refcount_read(&curr->ref_count) && curr->to_dev == to_dev)
 			return curr;
 	}
 	return NULL;
@@ -709,7 +719,7 @@ mlxsw_sp_span_entry_find_by_id(struct mlxsw_sp *mlxsw_sp, int span_id)
 	for (i = 0; i < mlxsw_sp->span->entries_count; i++) {
 		struct mlxsw_sp_span_entry *curr = &mlxsw_sp->span->entries[i];
 
-		if (curr->ref_count && curr->id == span_id)
+		if (refcount_read(&curr->ref_count) && curr->id == span_id)
 			return curr;
 	}
 	return NULL;
@@ -726,7 +736,7 @@ mlxsw_sp_span_entry_get(struct mlxsw_sp *mlxsw_sp,
 	span_entry = mlxsw_sp_span_entry_find_by_port(mlxsw_sp, to_dev);
 	if (span_entry) {
 		/* Already exists, just take a reference */
-		span_entry->ref_count++;
+		refcount_inc(&span_entry->ref_count);
 		return span_entry;
 	}
 
@@ -736,8 +746,7 @@ mlxsw_sp_span_entry_get(struct mlxsw_sp *mlxsw_sp,
 static int mlxsw_sp_span_entry_put(struct mlxsw_sp *mlxsw_sp,
 				   struct mlxsw_sp_span_entry *span_entry)
 {
-	WARN_ON(!span_entry->ref_count);
-	if (--span_entry->ref_count == 0)
+	if (refcount_dec_and_test(&span_entry->ref_count))
 		mlxsw_sp_span_entry_destroy(mlxsw_sp, span_entry);
 	return 0;
 }
@@ -961,7 +970,7 @@ int mlxsw_sp_span_mirror_add(struct mlxsw_sp_port *from,
 		return -EOPNOTSUPP;
 	}
 
-	err = ops->parms(to_dev, &sparms);
+	err = ops->parms_set(to_dev, &sparms);
 	if (err)
 		return err;
 
@@ -969,9 +978,6 @@ int mlxsw_sp_span_mirror_add(struct mlxsw_sp_port *from,
 	if (!span_entry)
 		return -ENOBUFS;
 
-	netdev_dbg(from->dev, "Adding inspected port to SPAN entry %d\n",
-		   span_entry->id);
-
 	err = mlxsw_sp_span_inspected_port_add(from, span_entry, type, bind);
 	if (err)
 		goto err_port_bind;
@@ -995,8 +1001,6 @@ void mlxsw_sp_span_mirror_del(struct mlxsw_sp_port *from, int span_id,
 		return;
 	}
 
-	netdev_dbg(from->dev, "removing inspected port from SPAN entry %d\n",
-		   span_entry->id);
 	mlxsw_sp_span_inspected_port_del(from, span_entry, type, bind);
 }
 
@@ -1014,10 +1018,10 @@ static void mlxsw_sp_span_respin_work(struct work_struct *work)
 		struct mlxsw_sp_span_entry *curr = &mlxsw_sp->span->entries[i];
 		struct mlxsw_sp_span_parms sparms = {NULL};
 
-		if (!curr->ref_count)
+		if (!refcount_read(&curr->ref_count))
 			continue;
 
-		err = curr->ops->parms(curr->to_dev, &sparms);
+		err = curr->ops->parms_set(curr->to_dev, &sparms);
 		if (err)
 			continue;
 
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.h
index 59724335525f..d23abdf957fa 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.h
@@ -6,6 +6,7 @@
 
 #include <linux/types.h>
 #include <linux/if_ether.h>
+#include <linux/refcount.h>
 
 #include "spectrum_router.h"
 
@@ -43,14 +44,14 @@ struct mlxsw_sp_span_entry {
 	const struct mlxsw_sp_span_entry_ops *ops;
 	struct mlxsw_sp_span_parms parms;
 	struct list_head bound_ports_list;
-	int ref_count;
+	refcount_t ref_count;
 	int id;
 };
 
 struct mlxsw_sp_span_entry_ops {
 	bool (*can_handle)(const struct net_device *to_dev);
-	int (*parms)(const struct net_device *to_dev,
-		     struct mlxsw_sp_span_parms *sparmsp);
+	int (*parms_set)(const struct net_device *to_dev,
+			 struct mlxsw_sp_span_parms *sparmsp);
 	int (*configure)(struct mlxsw_sp_span_entry *span_entry,
 			 struct mlxsw_sp_span_parms sparms);
 	void (*deconfigure)(struct mlxsw_sp_span_entry *span_entry);
diff --git a/drivers/net/ethernet/mscc/Makefile b/drivers/net/ethernet/mscc/Makefile
index 9a36c26095c8..91b33b55054e 100644
--- a/drivers/net/ethernet/mscc/Makefile
+++ b/drivers/net/ethernet/mscc/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: (GPL-2.0 OR MIT)
 obj-$(CONFIG_MSCC_OCELOT_SWITCH) += mscc_ocelot_common.o
 mscc_ocelot_common-y := ocelot.o ocelot_io.o
-mscc_ocelot_common-y += ocelot_regs.o ocelot_tc.o ocelot_police.o ocelot_ace.o ocelot_flower.o
+mscc_ocelot_common-y += ocelot_regs.o ocelot_tc.o ocelot_police.o ocelot_ace.o ocelot_flower.o ocelot_ptp.o
 obj-$(CONFIG_MSCC_OCELOT_SWITCH_OCELOT) += ocelot_board.o
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index a8c48a4a708f..a2b9b85612a4 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
-#include <linux/ptp_clock_kernel.h>
 #include <linux/skbuff.h>
 #include <linux/iopoll.h>
 #include <net/arp.h>
@@ -1350,6 +1349,12 @@ int ocelot_get_ts_info(struct ocelot *ocelot, int port,
 {
 	info->phc_index = ocelot->ptp_clock ?
 			  ptp_clock_index(ocelot->ptp_clock) : -1;
+	if (info->phc_index == -1) {
+		info->so_timestamping |= SOF_TIMESTAMPING_TX_SOFTWARE |
+					 SOF_TIMESTAMPING_RX_SOFTWARE |
+					 SOF_TIMESTAMPING_SOFTWARE;
+		return 0;
+	}
 	info->so_timestamping |= SOF_TIMESTAMPING_TX_SOFTWARE |
 				 SOF_TIMESTAMPING_RX_SOFTWARE |
 				 SOF_TIMESTAMPING_SOFTWARE |
@@ -1991,200 +1996,6 @@ struct notifier_block ocelot_switchdev_blocking_nb __read_mostly = {
 };
 EXPORT_SYMBOL(ocelot_switchdev_blocking_nb);
 
-int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts)
-{
-	struct ocelot *ocelot = container_of(ptp, struct ocelot, ptp_info);
-	unsigned long flags;
-	time64_t s;
-	u32 val;
-	s64 ns;
-
-	spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
-
-	val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
-	val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK | PTP_PIN_CFG_DOM);
-	val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_SAVE);
-	ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
-
-	s = ocelot_read_rix(ocelot, PTP_PIN_TOD_SEC_MSB, TOD_ACC_PIN) & 0xffff;
-	s <<= 32;
-	s += ocelot_read_rix(ocelot, PTP_PIN_TOD_SEC_LSB, TOD_ACC_PIN);
-	ns = ocelot_read_rix(ocelot, PTP_PIN_TOD_NSEC, TOD_ACC_PIN);
-
-	spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
-
-	/* Deal with negative values */
-	if (ns >= 0x3ffffff0 && ns <= 0x3fffffff) {
-		s--;
-		ns &= 0xf;
-		ns += 999999984;
-	}
-
-	set_normalized_timespec64(ts, s, ns);
-	return 0;
-}
-EXPORT_SYMBOL(ocelot_ptp_gettime64);
-
-static int ocelot_ptp_settime64(struct ptp_clock_info *ptp,
-				const struct timespec64 *ts)
-{
-	struct ocelot *ocelot = container_of(ptp, struct ocelot, ptp_info);
-	unsigned long flags;
-	u32 val;
-
-	spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
-
-	val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
-	val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK | PTP_PIN_CFG_DOM);
-	val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_IDLE);
-
-	ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
-
-	ocelot_write_rix(ocelot, lower_32_bits(ts->tv_sec), PTP_PIN_TOD_SEC_LSB,
-			 TOD_ACC_PIN);
-	ocelot_write_rix(ocelot, upper_32_bits(ts->tv_sec), PTP_PIN_TOD_SEC_MSB,
-			 TOD_ACC_PIN);
-	ocelot_write_rix(ocelot, ts->tv_nsec, PTP_PIN_TOD_NSEC, TOD_ACC_PIN);
-
-	val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
-	val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK | PTP_PIN_CFG_DOM);
-	val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_LOAD);
-
-	ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
-
-	spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
-	return 0;
-}
-
-static int ocelot_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
-{
-	if (delta > -(NSEC_PER_SEC / 2) && delta < (NSEC_PER_SEC / 2)) {
-		struct ocelot *ocelot = container_of(ptp, struct ocelot, ptp_info);
-		unsigned long flags;
-		u32 val;
-
-		spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
-
-		val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
-		val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK | PTP_PIN_CFG_DOM);
-		val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_IDLE);
-
-		ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
-
-		ocelot_write_rix(ocelot, 0, PTP_PIN_TOD_SEC_LSB, TOD_ACC_PIN);
-		ocelot_write_rix(ocelot, 0, PTP_PIN_TOD_SEC_MSB, TOD_ACC_PIN);
-		ocelot_write_rix(ocelot, delta, PTP_PIN_TOD_NSEC, TOD_ACC_PIN);
-
-		val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
-		val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK | PTP_PIN_CFG_DOM);
-		val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_DELTA);
-
-		ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
-
-		spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
-	} else {
-		/* Fall back using ocelot_ptp_settime64 which is not exact. */
-		struct timespec64 ts;
-		u64 now;
-
-		ocelot_ptp_gettime64(ptp, &ts);
-
-		now = ktime_to_ns(timespec64_to_ktime(ts));
-		ts = ns_to_timespec64(now + delta);
-
-		ocelot_ptp_settime64(ptp, &ts);
-	}
-	return 0;
-}
-
-static int ocelot_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
-{
-	struct ocelot *ocelot = container_of(ptp, struct ocelot, ptp_info);
-	u32 unit = 0, direction = 0;
-	unsigned long flags;
-	u64 adj = 0;
-
-	spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
-
-	if (!scaled_ppm)
-		goto disable_adj;
-
-	if (scaled_ppm < 0) {
-		direction = PTP_CFG_CLK_ADJ_CFG_DIR;
-		scaled_ppm = -scaled_ppm;
-	}
-
-	adj = PSEC_PER_SEC << 16;
-	do_div(adj, scaled_ppm);
-	do_div(adj, 1000);
-
-	/* If the adjustment value is too large, use ns instead */
-	if (adj >= (1L << 30)) {
-		unit = PTP_CFG_CLK_ADJ_FREQ_NS;
-		do_div(adj, 1000);
-	}
-
-	/* Still too big */
-	if (adj >= (1L << 30))
-		goto disable_adj;
-
-	ocelot_write(ocelot, unit | adj, PTP_CLK_CFG_ADJ_FREQ);
-	ocelot_write(ocelot, PTP_CFG_CLK_ADJ_CFG_ENA | direction,
-		     PTP_CLK_CFG_ADJ_CFG);
-
-	spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
-	return 0;
-
-disable_adj:
-	ocelot_write(ocelot, 0, PTP_CLK_CFG_ADJ_CFG);
-
-	spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
-	return 0;
-}
-
-static struct ptp_clock_info ocelot_ptp_clock_info = {
-	.owner		= THIS_MODULE,
-	.name		= "ocelot ptp",
-	.max_adj	= 0x7fffffff,
-	.n_alarm	= 0,
-	.n_ext_ts	= 0,
-	.n_per_out	= 0,
-	.n_pins		= 0,
-	.pps		= 0,
-	.gettime64	= ocelot_ptp_gettime64,
-	.settime64	= ocelot_ptp_settime64,
-	.adjtime	= ocelot_ptp_adjtime,
-	.adjfine	= ocelot_ptp_adjfine,
-};
-
-static int ocelot_init_timestamp(struct ocelot *ocelot)
-{
-	struct ptp_clock *ptp_clock;
-
-	ocelot->ptp_info = ocelot_ptp_clock_info;
-	ptp_clock = ptp_clock_register(&ocelot->ptp_info, ocelot->dev);
-	if (IS_ERR(ptp_clock))
-		return PTR_ERR(ptp_clock);
-	/* Check if PHC support is missing at the configuration level */
-	if (!ptp_clock)
-		return 0;
-
-	ocelot->ptp_clock = ptp_clock;
-
-	ocelot_write(ocelot, SYS_PTP_CFG_PTP_STAMP_WID(30), SYS_PTP_CFG);
-	ocelot_write(ocelot, 0xffffffff, ANA_TABLES_PTP_ID_LOW);
-	ocelot_write(ocelot, 0xffffffff, ANA_TABLES_PTP_ID_HIGH);
-
-	ocelot_write(ocelot, PTP_CFG_MISC_PTP_EN, PTP_CFG_MISC);
-
-	/* There is no device reconfiguration, PTP Rx stamping is always
-	 * enabled.
-	 */
-	ocelot->hwtstamp_config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
-
-	return 0;
-}
-
 /* Configure the maximum SDU (L2 payload) on RX to the value specified in @sdu.
  * The length of VLAN tags is accounted for automatically via DEV_MAC_TAGS_CFG.
  * In the special case that it's the NPI port that we're configuring, the
@@ -2530,15 +2341,6 @@ int ocelot_init(struct ocelot *ocelot)
 	queue_delayed_work(ocelot->stats_queue, &ocelot->stats_work,
 			   OCELOT_STATS_CHECK_DELAY);
 
-	if (ocelot->ptp) {
-		ret = ocelot_init_timestamp(ocelot);
-		if (ret) {
-			dev_err(ocelot->dev,
-				"Timestamp initialization failed\n");
-			return ret;
-		}
-	}
-
 	return 0;
 }
 EXPORT_SYMBOL(ocelot_init);
@@ -2551,8 +2353,6 @@ void ocelot_deinit(struct ocelot *ocelot)
 	cancel_delayed_work(&ocelot->stats_work);
 	destroy_workqueue(ocelot->stats_queue);
 	mutex_destroy(&ocelot->stats_lock);
-	if (ocelot->ptp_clock)
-		ptp_clock_unregister(ocelot->ptp_clock);
 
 	for (i = 0; i < ocelot->num_phys_ports; i++) {
 		port = ocelot->ports[i];
diff --git a/drivers/net/ethernet/mscc/ocelot.h b/drivers/net/ethernet/mscc/ocelot.h
index 641af929497f..f0a15aa187f2 100644
--- a/drivers/net/ethernet/mscc/ocelot.h
+++ b/drivers/net/ethernet/mscc/ocelot.h
@@ -15,18 +15,17 @@
 #include <linux/phy.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
-#include <linux/ptp_clock_kernel.h>
 #include <linux/regmap.h>
 
 #include <soc/mscc/ocelot_qsys.h>
 #include <soc/mscc/ocelot_sys.h>
 #include <soc/mscc/ocelot_dev.h>
 #include <soc/mscc/ocelot_ana.h>
+#include <soc/mscc/ocelot_ptp.h>
 #include <soc/mscc/ocelot.h>
 #include "ocelot_rew.h"
 #include "ocelot_qs.h"
 #include "ocelot_tc.h"
-#include "ocelot_ptp.h"
 
 #define OCELOT_BUFFER_CELL_SZ 60
 
diff --git a/drivers/net/ethernet/mscc/ocelot_ace.c b/drivers/net/ethernet/mscc/ocelot_ace.c
index 3bd286044480..dfd82a3baab2 100644
--- a/drivers/net/ethernet/mscc/ocelot_ace.c
+++ b/drivers/net/ethernet/mscc/ocelot_ace.c
@@ -706,13 +706,124 @@ ocelot_ace_rule_get_rule_index(struct ocelot_acl_block *block, int index)
 	return NULL;
 }
 
+/* If @on=false, then SNAP, ARP, IP and OAM frames will not match on keys based
+ * on destination and source MAC addresses, but only on higher-level protocol
+ * information. The only frame types to match on keys containing MAC addresses
+ * in this case are non-SNAP, non-ARP, non-IP and non-OAM frames.
+ *
+ * If @on=true, then the above frame types (SNAP, ARP, IP and OAM) will match
+ * on MAC_ETYPE keys such as destination and source MAC on this ingress port.
+ * However the setting has the side effect of making these frames not matching
+ * on any _other_ keys than MAC_ETYPE ones.
+ */
+static void ocelot_match_all_as_mac_etype(struct ocelot *ocelot, int port,
+					  bool on)
+{
+	u32 val = 0;
+
+	if (on)
+		val = ANA_PORT_VCAP_S2_CFG_S2_SNAP_DIS(3) |
+		      ANA_PORT_VCAP_S2_CFG_S2_ARP_DIS(3) |
+		      ANA_PORT_VCAP_S2_CFG_S2_IP_TCPUDP_DIS(3) |
+		      ANA_PORT_VCAP_S2_CFG_S2_IP_OTHER_DIS(3) |
+		      ANA_PORT_VCAP_S2_CFG_S2_OAM_DIS(3);
+
+	ocelot_rmw_gix(ocelot, val,
+		       ANA_PORT_VCAP_S2_CFG_S2_SNAP_DIS_M |
+		       ANA_PORT_VCAP_S2_CFG_S2_ARP_DIS_M |
+		       ANA_PORT_VCAP_S2_CFG_S2_IP_TCPUDP_DIS_M |
+		       ANA_PORT_VCAP_S2_CFG_S2_IP_OTHER_DIS_M |
+		       ANA_PORT_VCAP_S2_CFG_S2_OAM_DIS_M,
+		       ANA_PORT_VCAP_S2_CFG, port);
+}
+
+static bool ocelot_ace_is_problematic_mac_etype(struct ocelot_ace_rule *ace)
+{
+	u16 proto, mask;
+
+	if (ace->type != OCELOT_ACE_TYPE_ETYPE)
+		return false;
+
+	proto = ntohs(*(u16 *)ace->frame.etype.etype.value);
+	mask = ntohs(*(u16 *)ace->frame.etype.etype.mask);
+
+	/* ETH_P_ALL match, so all protocols below are included */
+	if (mask == 0)
+		return true;
+	if (proto == ETH_P_ARP)
+		return true;
+	if (proto == ETH_P_IP)
+		return true;
+	if (proto == ETH_P_IPV6)
+		return true;
+
+	return false;
+}
+
+static bool ocelot_ace_is_problematic_non_mac_etype(struct ocelot_ace_rule *ace)
+{
+	if (ace->type == OCELOT_ACE_TYPE_SNAP)
+		return true;
+	if (ace->type == OCELOT_ACE_TYPE_ARP)
+		return true;
+	if (ace->type == OCELOT_ACE_TYPE_IPV4)
+		return true;
+	if (ace->type == OCELOT_ACE_TYPE_IPV6)
+		return true;
+	return false;
+}
+
+static bool ocelot_exclusive_mac_etype_ace_rules(struct ocelot *ocelot,
+						 struct ocelot_ace_rule *ace)
+{
+	struct ocelot_acl_block *block = &ocelot->acl_block;
+	struct ocelot_ace_rule *tmp;
+	unsigned long port;
+	int i;
+
+	if (ocelot_ace_is_problematic_mac_etype(ace)) {
+		/* Search for any non-MAC_ETYPE rules on the port */
+		for (i = 0; i < block->count; i++) {
+			tmp = ocelot_ace_rule_get_rule_index(block, i);
+			if (tmp->ingress_port_mask & ace->ingress_port_mask &&
+			    ocelot_ace_is_problematic_non_mac_etype(tmp))
+				return false;
+		}
+
+		for_each_set_bit(port, &ace->ingress_port_mask,
+				 ocelot->num_phys_ports)
+			ocelot_match_all_as_mac_etype(ocelot, port, true);
+	} else if (ocelot_ace_is_problematic_non_mac_etype(ace)) {
+		/* Search for any MAC_ETYPE rules on the port */
+		for (i = 0; i < block->count; i++) {
+			tmp = ocelot_ace_rule_get_rule_index(block, i);
+			if (tmp->ingress_port_mask & ace->ingress_port_mask &&
+			    ocelot_ace_is_problematic_mac_etype(tmp))
+				return false;
+		}
+
+		for_each_set_bit(port, &ace->ingress_port_mask,
+				 ocelot->num_phys_ports)
+			ocelot_match_all_as_mac_etype(ocelot, port, false);
+	}
+
+	return true;
+}
+
 int ocelot_ace_rule_offload_add(struct ocelot *ocelot,
-				struct ocelot_ace_rule *rule)
+				struct ocelot_ace_rule *rule,
+				struct netlink_ext_ack *extack)
 {
 	struct ocelot_acl_block *block = &ocelot->acl_block;
 	struct ocelot_ace_rule *ace;
 	int i, index;
 
+	if (!ocelot_exclusive_mac_etype_ace_rules(ocelot, rule)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Cannot mix MAC_ETYPE with non-MAC_ETYPE rules");
+		return -EBUSY;
+	}
+
 	/* Add rule to the linked list */
 	ocelot_ace_rule_add(ocelot, block, rule);
 
diff --git a/drivers/net/ethernet/mscc/ocelot_ace.h b/drivers/net/ethernet/mscc/ocelot_ace.h
index 29d22c566786..099e177f2617 100644
--- a/drivers/net/ethernet/mscc/ocelot_ace.h
+++ b/drivers/net/ethernet/mscc/ocelot_ace.h
@@ -194,7 +194,7 @@ struct ocelot_ace_rule {
 
 	enum ocelot_ace_action action;
 	struct ocelot_ace_stats stats;
-	u16 ingress_port_mask;
+	unsigned long ingress_port_mask;
 
 	enum ocelot_vcap_bit dmac_mc;
 	enum ocelot_vcap_bit dmac_bc;
@@ -215,7 +215,8 @@ struct ocelot_ace_rule {
 };
 
 int ocelot_ace_rule_offload_add(struct ocelot *ocelot,
-				struct ocelot_ace_rule *rule);
+				struct ocelot_ace_rule *rule,
+				struct netlink_ext_ack *extack);
 int ocelot_ace_rule_offload_del(struct ocelot *ocelot,
 				struct ocelot_ace_rule *rule);
 int ocelot_ace_rule_stats_update(struct ocelot *ocelot,
diff --git a/drivers/net/ethernet/mscc/ocelot_board.c b/drivers/net/ethernet/mscc/ocelot_board.c
index 0ac9fbf77a01..67a8d61c926a 100644
--- a/drivers/net/ethernet/mscc/ocelot_board.c
+++ b/drivers/net/ethernet/mscc/ocelot_board.c
@@ -366,6 +366,23 @@ static const struct vcap_props vsc7514_vcap_props[] = {
 	},
 };
 
+static struct ptp_clock_info ocelot_ptp_clock_info = {
+	.owner		= THIS_MODULE,
+	.name		= "ocelot ptp",
+	.max_adj	= 0x7fffffff,
+	.n_alarm	= 0,
+	.n_ext_ts	= 0,
+	.n_per_out	= OCELOT_PTP_PINS_NUM,
+	.n_pins		= OCELOT_PTP_PINS_NUM,
+	.pps		= 0,
+	.gettime64	= ocelot_ptp_gettime64,
+	.settime64	= ocelot_ptp_settime64,
+	.adjtime	= ocelot_ptp_adjtime,
+	.adjfine	= ocelot_ptp_adjfine,
+	.verify		= ocelot_ptp_verify,
+	.enable		= ocelot_ptp_enable,
+};
+
 static int mscc_ocelot_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -469,6 +486,15 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 	ocelot->vcap = vsc7514_vcap_props;
 
 	ocelot_init(ocelot);
+	if (ocelot->ptp) {
+		err = ocelot_init_timestamp(ocelot, &ocelot_ptp_clock_info);
+		if (err) {
+			dev_err(ocelot->dev,
+				"Timestamp initialization failed\n");
+			ocelot->ptp = 0;
+		}
+	}
+
 	/* No NPI port */
 	ocelot_configure_cpu(ocelot, -1, OCELOT_TAG_PREFIX_NONE,
 			     OCELOT_TAG_PREFIX_NONE);
@@ -574,6 +600,7 @@ static int mscc_ocelot_remove(struct platform_device *pdev)
 {
 	struct ocelot *ocelot = platform_get_drvdata(pdev);
 
+	ocelot_deinit_timestamp(ocelot);
 	ocelot_deinit(ocelot);
 	unregister_switchdev_blocking_notifier(&ocelot_switchdev_blocking_nb);
 	unregister_switchdev_notifier(&ocelot_switchdev_nb);
diff --git a/drivers/net/ethernet/mscc/ocelot_flower.c b/drivers/net/ethernet/mscc/ocelot_flower.c
index 341923311fec..5ce172e22b43 100644
--- a/drivers/net/ethernet/mscc/ocelot_flower.c
+++ b/drivers/net/ethernet/mscc/ocelot_flower.c
@@ -51,6 +51,8 @@ static int ocelot_flower_parse(struct flow_cls_offload *f,
 {
 	struct flow_rule *rule = flow_cls_offload_flow_rule(f);
 	struct flow_dissector *dissector = rule->match.dissector;
+	u16 proto = ntohs(f->common.protocol);
+	bool match_protocol = true;
 
 	if (dissector->used_keys &
 	    ~(BIT(FLOW_DISSECTOR_KEY_CONTROL) |
@@ -71,7 +73,6 @@ static int ocelot_flower_parse(struct flow_cls_offload *f,
 
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
 		struct flow_match_eth_addrs match;
-		u16 proto = ntohs(f->common.protocol);
 
 		/* The hw support mac matches only for MAC_ETYPE key,
 		 * therefore if other matches(port, tcp flags, etc) are added
@@ -86,11 +87,6 @@ static int ocelot_flower_parse(struct flow_cls_offload *f,
 		     BIT(FLOW_DISSECTOR_KEY_CONTROL)))
 			return -EOPNOTSUPP;
 
-		if (proto == ETH_P_IP ||
-		    proto == ETH_P_IPV6 ||
-		    proto == ETH_P_ARP)
-			return -EOPNOTSUPP;
-
 		flow_rule_match_eth_addrs(rule, &match);
 		ace->type = OCELOT_ACE_TYPE_ETYPE;
 		ether_addr_copy(ace->frame.etype.dmac.value,
@@ -114,6 +110,7 @@ static int ocelot_flower_parse(struct flow_cls_offload *f,
 				match.key->ip_proto;
 			ace->frame.ipv4.proto.mask[0] =
 				match.mask->ip_proto;
+			match_protocol = false;
 		}
 		if (ntohs(match.key->n_proto) == ETH_P_IPV6) {
 			ace->type = OCELOT_ACE_TYPE_IPV6;
@@ -121,11 +118,12 @@ static int ocelot_flower_parse(struct flow_cls_offload *f,
 				match.key->ip_proto;
 			ace->frame.ipv6.proto.mask[0] =
 				match.mask->ip_proto;
+			match_protocol = false;
 		}
 	}
 
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV4_ADDRS) &&
-	    ntohs(f->common.protocol) == ETH_P_IP) {
+	    proto == ETH_P_IP) {
 		struct flow_match_ipv4_addrs match;
 		u8 *tmp;
 
@@ -141,10 +139,11 @@ static int ocelot_flower_parse(struct flow_cls_offload *f,
 
 		tmp = &ace->frame.ipv4.dip.mask.addr[0];
 		memcpy(tmp, &match.mask->dst, 4);
+		match_protocol = false;
 	}
 
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV6_ADDRS) &&
-	    ntohs(f->common.protocol) == ETH_P_IPV6) {
+	    proto == ETH_P_IPV6) {
 		return -EOPNOTSUPP;
 	}
 
@@ -156,6 +155,7 @@ static int ocelot_flower_parse(struct flow_cls_offload *f,
 		ace->frame.ipv4.sport.mask = ntohs(match.mask->src);
 		ace->frame.ipv4.dport.value = ntohs(match.key->dst);
 		ace->frame.ipv4.dport.mask = ntohs(match.mask->dst);
+		match_protocol = false;
 	}
 
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_VLAN)) {
@@ -167,9 +167,20 @@ static int ocelot_flower_parse(struct flow_cls_offload *f,
 		ace->vlan.vid.mask = match.mask->vlan_id;
 		ace->vlan.pcp.value[0] = match.key->vlan_priority;
 		ace->vlan.pcp.mask[0] = match.mask->vlan_priority;
+		match_protocol = false;
 	}
 
 finished_key_parsing:
+	if (match_protocol && proto != ETH_P_ALL) {
+		/* TODO: support SNAP, LLC etc */
+		if (proto < ETH_P_802_3_MIN)
+			return -EOPNOTSUPP;
+		ace->type = OCELOT_ACE_TYPE_ETYPE;
+		*(u16 *)ace->frame.etype.etype.value = htons(proto);
+		*(u16 *)ace->frame.etype.etype.mask = 0xffff;
+	}
+	/* else, a rule of type OCELOT_ACE_TYPE_ANY is implicitly added */
+
 	ace->prio = f->common.prio;
 	ace->id = f->cookie;
 	return ocelot_flower_parse_action(f, ace);
@@ -205,7 +216,7 @@ int ocelot_cls_flower_replace(struct ocelot *ocelot, int port,
 		return ret;
 	}
 
-	return ocelot_ace_rule_offload_add(ocelot, ace);
+	return ocelot_ace_rule_offload_add(ocelot, ace, f->common.extack);
 }
 EXPORT_SYMBOL_GPL(ocelot_cls_flower_replace);
 
diff --git a/drivers/net/ethernet/mscc/ocelot_ptp.c b/drivers/net/ethernet/mscc/ocelot_ptp.c
new file mode 100644
index 000000000000..a3088a1676ed
--- /dev/null
+++ b/drivers/net/ethernet/mscc/ocelot_ptp.c
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Microsemi Ocelot PTP clock driver
+ *
+ * Copyright (c) 2017 Microsemi Corporation
+ * Copyright 2020 NXP
+ */
+#include <soc/mscc/ocelot_ptp.h>
+#include <soc/mscc/ocelot_sys.h>
+#include <soc/mscc/ocelot.h>
+
+int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts)
+{
+	struct ocelot *ocelot = container_of(ptp, struct ocelot, ptp_info);
+	unsigned long flags;
+	time64_t s;
+	u32 val;
+	s64 ns;
+
+	spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
+
+	val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
+	val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK | PTP_PIN_CFG_DOM);
+	val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_SAVE);
+	ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
+
+	s = ocelot_read_rix(ocelot, PTP_PIN_TOD_SEC_MSB, TOD_ACC_PIN) & 0xffff;
+	s <<= 32;
+	s += ocelot_read_rix(ocelot, PTP_PIN_TOD_SEC_LSB, TOD_ACC_PIN);
+	ns = ocelot_read_rix(ocelot, PTP_PIN_TOD_NSEC, TOD_ACC_PIN);
+
+	spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+
+	/* Deal with negative values */
+	if (ns >= 0x3ffffff0 && ns <= 0x3fffffff) {
+		s--;
+		ns &= 0xf;
+		ns += 999999984;
+	}
+
+	set_normalized_timespec64(ts, s, ns);
+	return 0;
+}
+EXPORT_SYMBOL(ocelot_ptp_gettime64);
+
+int ocelot_ptp_settime64(struct ptp_clock_info *ptp,
+			 const struct timespec64 *ts)
+{
+	struct ocelot *ocelot = container_of(ptp, struct ocelot, ptp_info);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
+
+	val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
+	val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK | PTP_PIN_CFG_DOM);
+	val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_IDLE);
+
+	ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
+
+	ocelot_write_rix(ocelot, lower_32_bits(ts->tv_sec), PTP_PIN_TOD_SEC_LSB,
+			 TOD_ACC_PIN);
+	ocelot_write_rix(ocelot, upper_32_bits(ts->tv_sec), PTP_PIN_TOD_SEC_MSB,
+			 TOD_ACC_PIN);
+	ocelot_write_rix(ocelot, ts->tv_nsec, PTP_PIN_TOD_NSEC, TOD_ACC_PIN);
+
+	val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
+	val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK | PTP_PIN_CFG_DOM);
+	val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_LOAD);
+
+	ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
+
+	spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(ocelot_ptp_settime64);
+
+int ocelot_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+	if (delta > -(NSEC_PER_SEC / 2) && delta < (NSEC_PER_SEC / 2)) {
+		struct ocelot *ocelot = container_of(ptp, struct ocelot,
+						     ptp_info);
+		unsigned long flags;
+		u32 val;
+
+		spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
+
+		val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
+		val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK |
+			 PTP_PIN_CFG_DOM);
+		val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_IDLE);
+
+		ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
+
+		ocelot_write_rix(ocelot, 0, PTP_PIN_TOD_SEC_LSB, TOD_ACC_PIN);
+		ocelot_write_rix(ocelot, 0, PTP_PIN_TOD_SEC_MSB, TOD_ACC_PIN);
+		ocelot_write_rix(ocelot, delta, PTP_PIN_TOD_NSEC, TOD_ACC_PIN);
+
+		val = ocelot_read_rix(ocelot, PTP_PIN_CFG, TOD_ACC_PIN);
+		val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK |
+			 PTP_PIN_CFG_DOM);
+		val |= PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_DELTA);
+
+		ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
+
+		spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+	} else {
+		/* Fall back using ocelot_ptp_settime64 which is not exact. */
+		struct timespec64 ts;
+		u64 now;
+
+		ocelot_ptp_gettime64(ptp, &ts);
+
+		now = ktime_to_ns(timespec64_to_ktime(ts));
+		ts = ns_to_timespec64(now + delta);
+
+		ocelot_ptp_settime64(ptp, &ts);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(ocelot_ptp_adjtime);
+
+int ocelot_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
+{
+	struct ocelot *ocelot = container_of(ptp, struct ocelot, ptp_info);
+	u32 unit = 0, direction = 0;
+	unsigned long flags;
+	u64 adj = 0;
+
+	spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
+
+	if (!scaled_ppm)
+		goto disable_adj;
+
+	if (scaled_ppm < 0) {
+		direction = PTP_CFG_CLK_ADJ_CFG_DIR;
+		scaled_ppm = -scaled_ppm;
+	}
+
+	adj = PSEC_PER_SEC << 16;
+	do_div(adj, scaled_ppm);
+	do_div(adj, 1000);
+
+	/* If the adjustment value is too large, use ns instead */
+	if (adj >= (1L << 30)) {
+		unit = PTP_CFG_CLK_ADJ_FREQ_NS;
+		do_div(adj, 1000);
+	}
+
+	/* Still too big */
+	if (adj >= (1L << 30))
+		goto disable_adj;
+
+	ocelot_write(ocelot, unit | adj, PTP_CLK_CFG_ADJ_FREQ);
+	ocelot_write(ocelot, PTP_CFG_CLK_ADJ_CFG_ENA | direction,
+		     PTP_CLK_CFG_ADJ_CFG);
+
+	spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+	return 0;
+
+disable_adj:
+	ocelot_write(ocelot, 0, PTP_CLK_CFG_ADJ_CFG);
+
+	spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(ocelot_ptp_adjfine);
+
+int ocelot_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
+		      enum ptp_pin_function func, unsigned int chan)
+{
+	switch (func) {
+	case PTP_PF_NONE:
+	case PTP_PF_PEROUT:
+		break;
+	case PTP_PF_EXTTS:
+	case PTP_PF_PHYSYNC:
+		return -1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(ocelot_ptp_verify);
+
+int ocelot_ptp_enable(struct ptp_clock_info *ptp,
+		      struct ptp_clock_request *rq, int on)
+{
+	struct ocelot *ocelot = container_of(ptp, struct ocelot, ptp_info);
+	struct timespec64 ts_start, ts_period;
+	enum ocelot_ptp_pins ptp_pin;
+	unsigned long flags;
+	bool pps = false;
+	int pin = -1;
+	u32 val;
+	s64 ns;
+
+	switch (rq->type) {
+	case PTP_CLK_REQ_PEROUT:
+		/* Reject requests with unsupported flags */
+		if (rq->perout.flags)
+			return -EOPNOTSUPP;
+
+		pin = ptp_find_pin(ocelot->ptp_clock, PTP_PF_PEROUT,
+				   rq->perout.index);
+		if (pin == 0)
+			ptp_pin = PTP_PIN_0;
+		else if (pin == 1)
+			ptp_pin = PTP_PIN_1;
+		else if (pin == 2)
+			ptp_pin = PTP_PIN_2;
+		else if (pin == 3)
+			ptp_pin = PTP_PIN_3;
+		else
+			return -EBUSY;
+
+		ts_start.tv_sec = rq->perout.start.sec;
+		ts_start.tv_nsec = rq->perout.start.nsec;
+		ts_period.tv_sec = rq->perout.period.sec;
+		ts_period.tv_nsec = rq->perout.period.nsec;
+
+		if (ts_period.tv_sec == 1 && ts_period.tv_nsec == 0)
+			pps = true;
+
+		if (ts_start.tv_sec || (ts_start.tv_nsec && !pps)) {
+			dev_warn(ocelot->dev,
+				 "Absolute start time not supported!\n");
+			dev_warn(ocelot->dev,
+				 "Accept nsec for PPS phase adjustment, otherwise start time should be 0 0.\n");
+			return -EINVAL;
+		}
+
+		/* Handle turning off */
+		if (!on) {
+			spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
+			val = PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_IDLE);
+			ocelot_write_rix(ocelot, val, PTP_PIN_CFG, ptp_pin);
+			spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+			break;
+		}
+
+		/* Handle PPS request */
+		if (pps) {
+			spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
+			/* Pulse generated perout.start.nsec after TOD has
+			 * increased seconds.
+			 * Pulse width is set to 1us.
+			 */
+			ocelot_write_rix(ocelot, ts_start.tv_nsec,
+					 PTP_PIN_WF_LOW_PERIOD, ptp_pin);
+			ocelot_write_rix(ocelot, 1000,
+					 PTP_PIN_WF_HIGH_PERIOD, ptp_pin);
+			val = PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_CLOCK);
+			val |= PTP_PIN_CFG_SYNC;
+			ocelot_write_rix(ocelot, val, PTP_PIN_CFG, ptp_pin);
+			spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+			break;
+		}
+
+		/* Handle periodic clock */
+		ns = timespec64_to_ns(&ts_period);
+		ns = ns >> 1;
+		if (ns > 0x3fffffff || ns <= 0x6)
+			return -EINVAL;
+
+		spin_lock_irqsave(&ocelot->ptp_clock_lock, flags);
+		ocelot_write_rix(ocelot, ns, PTP_PIN_WF_LOW_PERIOD, ptp_pin);
+		ocelot_write_rix(ocelot, ns, PTP_PIN_WF_HIGH_PERIOD, ptp_pin);
+		val = PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_CLOCK);
+		ocelot_write_rix(ocelot, val, PTP_PIN_CFG, ptp_pin);
+		spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(ocelot_ptp_enable);
+
+int ocelot_init_timestamp(struct ocelot *ocelot, struct ptp_clock_info *info)
+{
+	struct ptp_clock *ptp_clock;
+	int i;
+
+	ocelot->ptp_info = *info;
+
+	for (i = 0; i < OCELOT_PTP_PINS_NUM; i++) {
+		struct ptp_pin_desc *p = &ocelot->ptp_pins[i];
+
+		snprintf(p->name, sizeof(p->name), "switch_1588_dat%d", i);
+		p->index = i;
+		p->func = PTP_PF_NONE;
+	}
+
+	ocelot->ptp_info.pin_config = &ocelot->ptp_pins[0];
+
+	ptp_clock = ptp_clock_register(&ocelot->ptp_info, ocelot->dev);
+	if (IS_ERR(ptp_clock))
+		return PTR_ERR(ptp_clock);
+	/* Check if PHC support is missing at the configuration level */
+	if (!ptp_clock)
+		return 0;
+
+	ocelot->ptp_clock = ptp_clock;
+
+	ocelot_write(ocelot, SYS_PTP_CFG_PTP_STAMP_WID(30), SYS_PTP_CFG);
+	ocelot_write(ocelot, 0xffffffff, ANA_TABLES_PTP_ID_LOW);
+	ocelot_write(ocelot, 0xffffffff, ANA_TABLES_PTP_ID_HIGH);
+
+	ocelot_write(ocelot, PTP_CFG_MISC_PTP_EN, PTP_CFG_MISC);
+
+	/* There is no device reconfiguration, PTP Rx stamping is always
+	 * enabled.
+	 */
+	ocelot->hwtstamp_config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+
+	return 0;
+}
+EXPORT_SYMBOL(ocelot_init_timestamp);
+
+int ocelot_deinit_timestamp(struct ocelot *ocelot)
+{
+	if (ocelot->ptp_clock)
+		ptp_clock_unregister(ocelot->ptp_clock);
+	return 0;
+}
+EXPORT_SYMBOL(ocelot_deinit_timestamp);
diff --git a/drivers/net/ethernet/mscc/ocelot_ptp.h b/drivers/net/ethernet/mscc/ocelot_ptp.h
deleted file mode 100644
index 9ede14a12573..000000000000
--- a/drivers/net/ethernet/mscc/ocelot_ptp.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-/*
- * Microsemi Ocelot Switch driver
- *
- * License: Dual MIT/GPL
- * Copyright (c) 2017 Microsemi Corporation
- */
-
-#ifndef _MSCC_OCELOT_PTP_H_
-#define _MSCC_OCELOT_PTP_H_
-
-#define PTP_PIN_CFG_RSZ			0x20
-#define PTP_PIN_TOD_SEC_MSB_RSZ		PTP_PIN_CFG_RSZ
-#define PTP_PIN_TOD_SEC_LSB_RSZ		PTP_PIN_CFG_RSZ
-#define PTP_PIN_TOD_NSEC_RSZ		PTP_PIN_CFG_RSZ
-
-#define PTP_PIN_CFG_DOM			BIT(0)
-#define PTP_PIN_CFG_SYNC		BIT(2)
-#define PTP_PIN_CFG_ACTION(x)		((x) << 3)
-#define PTP_PIN_CFG_ACTION_MASK		PTP_PIN_CFG_ACTION(0x7)
-
-enum {
-	PTP_PIN_ACTION_IDLE = 0,
-	PTP_PIN_ACTION_LOAD,
-	PTP_PIN_ACTION_SAVE,
-	PTP_PIN_ACTION_CLOCK,
-	PTP_PIN_ACTION_DELTA,
-	PTP_PIN_ACTION_NOSYNC,
-	PTP_PIN_ACTION_SYNC,
-};
-
-#define PTP_CFG_MISC_PTP_EN		BIT(2)
-
-#define PSEC_PER_SEC			1000000000000LL
-
-#define PTP_CFG_CLK_ADJ_CFG_ENA		BIT(0)
-#define PTP_CFG_CLK_ADJ_CFG_DIR		BIT(1)
-
-#define PTP_CFG_CLK_ADJ_FREQ_NS		BIT(30)
-
-#endif
diff --git a/drivers/net/ethernet/mscc/ocelot_regs.c b/drivers/net/ethernet/mscc/ocelot_regs.c
index b88b5899b227..ed4dd01a41ad 100644
--- a/drivers/net/ethernet/mscc/ocelot_regs.c
+++ b/drivers/net/ethernet/mscc/ocelot_regs.c
@@ -239,6 +239,8 @@ static const u32 ocelot_ptp_regmap[] = {
 	REG(PTP_PIN_TOD_SEC_MSB,           0x000004),
 	REG(PTP_PIN_TOD_SEC_LSB,           0x000008),
 	REG(PTP_PIN_TOD_NSEC,              0x00000c),
+	REG(PTP_PIN_WF_HIGH_PERIOD,        0x000014),
+	REG(PTP_PIN_WF_LOW_PERIOD,         0x000018),
 	REG(PTP_CFG_MISC,                  0x0000a0),
 	REG(PTP_CLK_CFG_ADJ_CFG,           0x0000a4),
 	REG(PTP_CLK_CFG_ADJ_FREQ,          0x0000a8),
diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
index bfa0c0d39600..8b018ed37b1b 100644
--- a/drivers/net/ethernet/natsemi/jazzsonic.c
+++ b/drivers/net/ethernet/natsemi/jazzsonic.c
@@ -208,11 +208,13 @@ static int jazz_sonic_probe(struct platform_device *pdev)
 
 	err = register_netdev(dev);
 	if (err)
-		goto out1;
+		goto undo_probe1;
 
 	return 0;
 
-out1:
+undo_probe1:
+	dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
 	release_mem_region(dev->base_addr, SONIC_MEM_SIZE);
 out:
 	free_netdev(dev);
diff --git a/drivers/net/ethernet/netronome/nfp/nfp_main.c b/drivers/net/ethernet/netronome/nfp/nfp_main.c
index 4d282fc56009..7ff2ccbd43b0 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_main.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_main.c
@@ -14,7 +14,6 @@
 #include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/firmware.h>
-#include <linux/vermagic.h>
 #include <linux/vmalloc.h>
 #include <net/devlink.h>
 
@@ -31,7 +30,6 @@
 #include "nfp_net.h"
 
 static const char nfp_driver_name[] = "nfp";
-const char nfp_driver_version[] = VERMAGIC_STRING;
 
 static const struct pci_device_id nfp_pci_device_ids[] = {
 	{ PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000,
@@ -920,4 +918,3 @@ MODULE_FIRMWARE("netronome/nic_AMDA0099-0001_1x10_1x25.nffw");
 MODULE_AUTHOR("Netronome Systems <oss-drivers@netronome.com>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("The Netronome Flow Processor (NFP) driver.");
-MODULE_VERSION(UTS_RELEASE);
diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
index 2779f1526d1e..a5aa3219d112 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
@@ -203,8 +203,6 @@ nfp_get_drvinfo(struct nfp_app *app, struct pci_dev *pdev,
 	char nsp_version[ETHTOOL_FWVERS_LEN] = {};
 
 	strlcpy(drvinfo->driver, pdev->driver->name, sizeof(drvinfo->driver));
-	strlcpy(drvinfo->version, nfp_driver_version, sizeof(drvinfo->version));
-
 	nfp_net_get_nspinfo(app, nsp_version);
 	snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
 		 "%s %s %s %s", vnic_version, nsp_version,
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_main.c b/drivers/net/ethernet/pensando/ionic/ionic_main.c
index 588c62e9add7..3ed150512091 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_main.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_main.c
@@ -6,7 +6,7 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/utsname.h>
-#include <linux/vermagic.h>
+#include <generated/utsrelease.h>
 
 #include "ionic.h"
 #include "ionic_bus.h"
diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index fa41bf08a589..d00663967afe 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -1016,6 +1016,7 @@ int qed_device_num_ports(struct qed_dev *cdev);
 int qed_fill_dev_info(struct qed_dev *cdev,
 		      struct qed_dev_info *dev_info);
 void qed_link_update(struct qed_hwfn *hwfn, struct qed_ptt *ptt);
+void qed_bw_update(struct qed_hwfn *hwfn, struct qed_ptt *ptt);
 u32 qed_unzip_data(struct qed_hwfn *p_hwfn,
 		   u32 input_len, u8 *input_buf,
 		   u32 max_size, u8 *unzip_buf);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 38a65b984e47..7119a18af19e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -1972,7 +1972,7 @@ static int qed_init_qm_sanity(struct qed_hwfn *p_hwfn)
 		return 0;
 
 	if (QED_IS_ROCE_PERSONALITY(p_hwfn)) {
-		p_hwfn->hw_info.multi_tc_roce_en = 0;
+		p_hwfn->hw_info.multi_tc_roce_en = false;
 		DP_NOTICE(p_hwfn,
 			  "multi-tc roce was disabled to reduce requested amount of pqs\n");
 		if (qed_init_qm_get_num_pqs(p_hwfn) <= RESC_NUM(p_hwfn, QED_PQ))
@@ -4392,7 +4392,7 @@ qed_get_hw_info(struct qed_hwfn *p_hwfn,
 	}
 
 	if (QED_IS_ROCE_PERSONALITY(p_hwfn))
-		p_hwfn->hw_info.multi_tc_roce_en = 1;
+		p_hwfn->hw_info.multi_tc_roce_en = true;
 
 	p_hwfn->hw_info.num_hw_tc = NUM_PHYS_TCS_4PORT_K2;
 	p_hwfn->hw_info.num_active_tc = 1;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
index 037e5978787e..4afd8572ada6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -2331,7 +2331,7 @@ static void qed_ll2_register_cb_ops(struct qed_dev *cdev,
 	cdev->ll2->cb_cookie = cookie;
 }
 
-struct qed_ll2_cbs ll2_cbs = {
+static struct qed_ll2_cbs ll2_cbs = {
 	.rx_comp_cb = &qed_ll2b_complete_rx_packet,
 	.rx_release_cb = &qed_ll2b_release_rx_packet,
 	.tx_comp_cb = &qed_ll2b_complete_tx_packet,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 96356e897c80..034a900b7387 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -49,6 +49,7 @@
 #include <linux/qed/qed_if.h>
 #include <linux/qed/qed_ll2_if.h>
 #include <net/devlink.h>
+#include <linux/aer.h>
 
 #include "qed.h"
 #include "qed_sriov.h"
@@ -129,6 +130,8 @@ static void qed_free_pci(struct qed_dev *cdev)
 {
 	struct pci_dev *pdev = cdev->pdev;
 
+	pci_disable_pcie_error_reporting(pdev);
+
 	if (cdev->doorbells && cdev->db_size)
 		iounmap(cdev->doorbells);
 	if (cdev->regview)
@@ -231,6 +234,12 @@ static int qed_init_pci(struct qed_dev *cdev, struct pci_dev *pdev)
 		return -ENOMEM;
 	}
 
+	/* AER (Advanced Error reporting) configuration */
+	rc = pci_enable_pcie_error_reporting(pdev);
+	if (rc)
+		DP_VERBOSE(cdev, NETIF_MSG_DRV,
+			   "Failed to configure PCIe AER [%d]\n", rc);
+
 	return 0;
 
 err2:
@@ -1940,6 +1949,15 @@ void qed_link_update(struct qed_hwfn *hwfn, struct qed_ptt *ptt)
 		op->link_update(cookie, &if_link);
 }
 
+void qed_bw_update(struct qed_hwfn *hwfn, struct qed_ptt *ptt)
+{
+	void *cookie = hwfn->cdev->ops_cookie;
+	struct qed_common_cb_ops *op = hwfn->cdev->protocol_ops.common;
+
+	if (IS_LEAD_HWFN(hwfn) && cookie && op && op->bw_update)
+		op->bw_update(cookie);
+}
+
 static int qed_drain(struct qed_dev *cdev)
 {
 	struct qed_hwfn *hwfn;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index 37e70562a964..475b89903f46 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c
@@ -736,9 +736,9 @@ static int qed_roce_sp_destroy_qp_responder(struct qed_hwfn *p_hwfn,
 
 	p_ramrod = &p_ent->ramrod.roce_destroy_qp_resp;
 
-	p_ramrod_res = (struct roce_destroy_qp_resp_output_params *)
-	    dma_alloc_coherent(&p_hwfn->cdev->pdev->dev, sizeof(*p_ramrod_res),
-			       &ramrod_res_phys, GFP_KERNEL);
+	p_ramrod_res = dma_alloc_coherent(&p_hwfn->cdev->pdev->dev,
+					  sizeof(*p_ramrod_res),
+					  &ramrod_res_phys, GFP_KERNEL);
 
 	if (!p_ramrod_res) {
 		rc = -ENOMEM;
@@ -872,10 +872,10 @@ int qed_roce_query_qp(struct qed_hwfn *p_hwfn,
 	}
 
 	/* Send a query responder ramrod to FW to get RQ-PSN and state */
-	p_resp_ramrod_res = (struct roce_query_qp_resp_output_params *)
-	    dma_alloc_coherent(&p_hwfn->cdev->pdev->dev,
-			       sizeof(*p_resp_ramrod_res),
-			       &resp_ramrod_res_phys, GFP_KERNEL);
+	p_resp_ramrod_res =
+		dma_alloc_coherent(&p_hwfn->cdev->pdev->dev,
+				   sizeof(*p_resp_ramrod_res),
+				   &resp_ramrod_res_phys, GFP_KERNEL);
 	if (!p_resp_ramrod_res) {
 		DP_NOTICE(p_hwfn,
 			  "qed query qp failed: cannot allocate memory (ramrod)\n");
@@ -920,8 +920,7 @@ int qed_roce_query_qp(struct qed_hwfn *p_hwfn,
 	}
 
 	/* Send a query requester ramrod to FW to get SQ-PSN and state */
-	p_req_ramrod_res = (struct roce_query_qp_req_output_params *)
-			   dma_alloc_coherent(&p_hwfn->cdev->pdev->dev,
+	p_req_ramrod_res = dma_alloc_coherent(&p_hwfn->cdev->pdev->dev,
 					      sizeof(*p_req_ramrod_res),
 					      &req_ramrod_res_phys,
 					      GFP_KERNEL);
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index 234c6f30effb..1a708f95ce94 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -485,6 +485,7 @@ struct qede_fastpath {
 
 #define QEDE_SP_RECOVERY		0
 #define QEDE_SP_RX_MODE			1
+#define QEDE_SP_AER			7
 
 #ifdef CONFIG_RFS_ACCEL
 int qede_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 34fa3917eb33..9b456198cb50 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -60,6 +60,7 @@
 #include <net/ip6_checksum.h>
 #include <linux/bitops.h>
 #include <linux/vmalloc.h>
+#include <linux/aer.h>
 #include "qede.h"
 #include "qede_ptp.h"
 
@@ -124,6 +125,8 @@ static const struct pci_device_id qede_pci_tbl[] = {
 MODULE_DEVICE_TABLE(pci, qede_pci_tbl);
 
 static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id);
+static pci_ers_result_t
+qede_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state);
 
 #define TX_TIMEOUT		(5 * HZ)
 
@@ -203,6 +206,10 @@ static int qede_sriov_configure(struct pci_dev *pdev, int num_vfs_param)
 }
 #endif
 
+static const struct pci_error_handlers qede_err_handler = {
+	.error_detected = qede_io_error_detected,
+};
+
 static struct pci_driver qede_pci_driver = {
 	.name = "qede",
 	.id_table = qede_pci_tbl,
@@ -212,6 +219,7 @@ static struct pci_driver qede_pci_driver = {
 #ifdef CONFIG_QED_SRIOV
 	.sriov_configure = qede_sriov_configure,
 #endif
+	.err_handler = &qede_err_handler,
 };
 
 static struct qed_eth_cb_ops qede_ll_ops = {
@@ -974,7 +982,8 @@ static void qede_sp_task(struct work_struct *work)
 		/* SRIOV must be disabled outside the lock to avoid a deadlock.
 		 * The recovery of the active VFs is currently not supported.
 		 */
-		qede_sriov_configure(edev->pdev, 0);
+		if (pci_num_vf(edev->pdev))
+			qede_sriov_configure(edev->pdev, 0);
 #endif
 		qede_lock(edev);
 		qede_recovery_handler(edev);
@@ -994,6 +1003,17 @@ static void qede_sp_task(struct work_struct *work)
 	}
 #endif
 	__qede_unlock(edev);
+
+	if (test_and_clear_bit(QEDE_SP_AER, &edev->sp_flags)) {
+#ifdef CONFIG_QED_SRIOV
+		/* SRIOV must be disabled outside the lock to avoid a deadlock.
+		 * The recovery of the active VFs is currently not supported.
+		 */
+		if (pci_num_vf(edev->pdev))
+			qede_sriov_configure(edev->pdev, 0);
+#endif
+		edev->ops->common->recovery_process(edev->cdev);
+	}
 }
 
 static void qede_update_pf_params(struct qed_dev *cdev)
@@ -2579,3 +2599,49 @@ static void qede_get_eth_tlv_data(void *dev, void *data)
 	etlv->num_txqs_full_set = true;
 	etlv->num_rxqs_full_set = true;
 }
+
+/**
+ * qede_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t
+qede_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct qede_dev *edev = netdev_priv(dev);
+
+	if (!edev)
+		return PCI_ERS_RESULT_NONE;
+
+	DP_NOTICE(edev, "IO error detected [%d]\n", state);
+
+	__qede_lock(edev);
+	if (edev->state == QEDE_STATE_RECOVERY) {
+		DP_NOTICE(edev, "Device already in the recovery state\n");
+		__qede_unlock(edev);
+		return PCI_ERS_RESULT_NONE;
+	}
+
+	/* PF handles the recovery of its VFs */
+	if (IS_VF(edev)) {
+		DP_VERBOSE(edev, QED_MSG_IOV,
+			   "VF recovery is handled by its PF\n");
+		__qede_unlock(edev);
+		return PCI_ERS_RESULT_RECOVERED;
+	}
+
+	/* Close OS Tx */
+	netif_tx_disable(edev->ndev);
+	netif_carrier_off(edev->ndev);
+
+	set_bit(QEDE_SP_AER, &edev->sp_flags);
+	schedule_delayed_work(&edev->sp_task, 0);
+
+	__qede_unlock(edev);
+
+	return PCI_ERS_RESULT_CAN_RECOVER;
+}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 134611aa2c9a..d838774af5a6 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -1880,12 +1880,6 @@ static inline void qlcnic_write_crb(struct qlcnic_adapter *adapter, char *buf,
 	adapter->ahw->hw_ops->write_crb(adapter, buf, offset, size);
 }
 
-static inline int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *adapter,
-					ulong off, u32 data)
-{
-	return adapter->ahw->hw_ops->write_reg(adapter, off, data);
-}
-
 static inline int qlcnic_get_mac_address(struct qlcnic_adapter *adapter,
 					 u8 *mac, u8 function)
 {
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index bf5bf05970a2..68d5255568a5 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -75,6 +75,8 @@
 #define R8169_TX_RING_BYTES	(NUM_TX_DESC * sizeof(struct TxDesc))
 #define R8169_RX_RING_BYTES	(NUM_RX_DESC * sizeof(struct RxDesc))
 
+#define OCP_STD_PHY_BASE	0xa400
+
 #define RTL_CFG_NO_GBIT	1
 
 /* write/read MMIO register */
@@ -386,10 +388,12 @@ enum rtl_register_content {
 	/* rx_mode_bits */
 	AcceptErr	= 0x20,
 	AcceptRunt	= 0x10,
+#define RX_CONFIG_ACCEPT_ERR_MASK	0x30
 	AcceptBroadcast	= 0x08,
 	AcceptMulticast	= 0x04,
 	AcceptMyPhys	= 0x02,
 	AcceptAllPhys	= 0x01,
+#define RX_CONFIG_ACCEPT_OK_MASK	0x0f
 #define RX_CONFIG_ACCEPT_MASK		0x3f
 
 	/* TxConfigBits */
@@ -847,8 +851,6 @@ static void r8168_mac_ocp_modify(struct rtl8169_private *tp, u32 reg, u16 mask,
 	r8168_mac_ocp_write(tp, reg, (data & ~mask) | set);
 }
 
-#define OCP_STD_PHY_BASE	0xa400
-
 static void r8168g_mdio_write(struct rtl8169_private *tp, int reg, int value)
 {
 	if (reg == 0x1f) {
@@ -1497,19 +1499,15 @@ static netdev_features_t rtl8169_fix_features(struct net_device *dev,
 	return features;
 }
 
-static int rtl8169_set_features(struct net_device *dev,
-				netdev_features_t features)
+static void rtl_set_rx_config_features(struct rtl8169_private *tp,
+				       netdev_features_t features)
 {
-	struct rtl8169_private *tp = netdev_priv(dev);
-	u32 rx_config;
-
-	rtl_lock_work(tp);
+	u32 rx_config = RTL_R32(tp, RxConfig);
 
-	rx_config = RTL_R32(tp, RxConfig);
 	if (features & NETIF_F_RXALL)
-		rx_config |= (AcceptErr | AcceptRunt);
+		rx_config |= RX_CONFIG_ACCEPT_ERR_MASK;
 	else
-		rx_config &= ~(AcceptErr | AcceptRunt);
+		rx_config &= ~RX_CONFIG_ACCEPT_ERR_MASK;
 
 	if (rtl_is_8125(tp)) {
 		if (features & NETIF_F_HW_VLAN_CTAG_RX)
@@ -1519,6 +1517,16 @@ static int rtl8169_set_features(struct net_device *dev,
 	}
 
 	RTL_W32(tp, RxConfig, rx_config);
+}
+
+static int rtl8169_set_features(struct net_device *dev,
+				netdev_features_t features)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+
+	rtl_lock_work(tp);
+
+	rtl_set_rx_config_features(tp, features);
 
 	if (features & NETIF_F_RXCSUM)
 		tp->cp_cmd |= RxChkSum;
@@ -2391,8 +2399,6 @@ static void rtl_pll_power_up(struct rtl8169_private *tp)
 	}
 
 	phy_resume(tp->phydev);
-	/* give MAC/PHY some time to resume */
-	msleep(20);
 }
 
 static void rtl_init_rxcfg(struct rtl8169_private *tp)
@@ -2411,8 +2417,7 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp)
 		RTL_W32(tp, RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
 		break;
 	case RTL_GIGA_MAC_VER_60 ... RTL_GIGA_MAC_VER_61:
-		RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_VLAN_8125 |
-				      RX_DMA_BURST);
+		RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST);
 		break;
 	default:
 		RTL_W32(tp, RxConfig, RX128_INT_EN | RX_DMA_BURST);
@@ -2679,14 +2684,11 @@ static void rtl_set_rx_mode(struct net_device *dev)
 		}
 	}
 
-	if (dev->features & NETIF_F_RXALL)
-		rx_mode |= (AcceptErr | AcceptRunt);
-
 	RTL_W32(tp, MAR0 + 4, mc_filter[1]);
 	RTL_W32(tp, MAR0 + 0, mc_filter[0]);
 
 	tmp = RTL_R32(tp, RxConfig);
-	RTL_W32(tp, RxConfig, (tmp & ~RX_CONFIG_ACCEPT_MASK) | rx_mode);
+	RTL_W32(tp, RxConfig, (tmp & ~RX_CONFIG_ACCEPT_OK_MASK) | rx_mode);
 }
 
 DECLARE_RTL_COND(rtl_csiar_cond)
@@ -3844,7 +3846,6 @@ static void rtl_hw_start(struct  rtl8169_private *tp)
 {
 	rtl_unlock_config_regs(tp);
 
-	tp->cp_cmd &= CPCMD_MASK;
 	RTL_W16(tp, CPlusCmd, tp->cp_cmd);
 
 	if (tp->mac_version <= RTL_GIGA_MAC_VER_06)
@@ -3866,6 +3867,7 @@ static void rtl_hw_start(struct  rtl8169_private *tp)
 	RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
 	rtl_init_rxcfg(tp);
 	rtl_set_tx_config_registers(tp);
+	rtl_set_rx_config_features(tp, tp->dev->features);
 	rtl_set_rx_mode(tp->dev);
 	rtl_irq_enable(tp);
 }
@@ -3881,12 +3883,6 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
 	return 0;
 }
 
-static inline void rtl8169_make_unusable_by_asic(struct RxDesc *desc)
-{
-	desc->addr = cpu_to_le64(0x0badbadbadbadbadull);
-	desc->opts1 &= ~cpu_to_le32(DescOwn | RsvdMask);
-}
-
 static inline void rtl8169_mark_to_asic(struct RxDesc *desc)
 {
 	u32 eor = le32_to_cpu(desc->opts1) & RingEnd;
@@ -3934,15 +3930,11 @@ static void rtl8169_rx_clear(struct rtl8169_private *tp)
 			       R8169_RX_BUF_SIZE, DMA_FROM_DEVICE);
 		__free_pages(tp->Rx_databuff[i], get_order(R8169_RX_BUF_SIZE));
 		tp->Rx_databuff[i] = NULL;
-		rtl8169_make_unusable_by_asic(tp->RxDescArray + i);
+		tp->RxDescArray[i].addr = 0;
+		tp->RxDescArray[i].opts1 = 0;
 	}
 }
 
-static inline void rtl8169_mark_as_last_descriptor(struct RxDesc *desc)
-{
-	desc->opts1 |= cpu_to_le32(RingEnd);
-}
-
 static int rtl8169_rx_fill(struct rtl8169_private *tp)
 {
 	unsigned int i;
@@ -3958,7 +3950,8 @@ static int rtl8169_rx_fill(struct rtl8169_private *tp)
 		tp->Rx_databuff[i] = data;
 	}
 
-	rtl8169_mark_as_last_descriptor(tp->RxDescArray + NUM_RX_DESC - 1);
+	/* mark as last descriptor in the ring */
+	tp->RxDescArray[NUM_RX_DESC - 1].opts1 |= cpu_to_le32(RingEnd);
 
 	return 0;
 }
@@ -4124,25 +4117,20 @@ static bool rtl8169_tso_csum_v2(struct rtl8169_private *tp,
 				struct sk_buff *skb, u32 *opts)
 {
 	u32 transport_offset = (u32)skb_transport_offset(skb);
-	u32 mss = skb_shinfo(skb)->gso_size;
+	struct skb_shared_info *shinfo = skb_shinfo(skb);
+	u32 mss = shinfo->gso_size;
 
 	if (mss) {
-		switch (vlan_get_protocol(skb)) {
-		case htons(ETH_P_IP):
+		if (shinfo->gso_type & SKB_GSO_TCPV4) {
 			opts[0] |= TD1_GTSENV4;
-			break;
-
-		case htons(ETH_P_IPV6):
+		} else if (shinfo->gso_type & SKB_GSO_TCPV6) {
 			if (skb_cow_head(skb, 0))
 				return false;
 
 			tcp_v6_gso_csum_prep(skb);
 			opts[0] |= TD1_GTSENV6;
-			break;
-
-		default:
+		} else {
 			WARN_ON_ONCE(1);
-			break;
 		}
 
 		opts[0] |= transport_offset << GTTCPHO_SHIFT;
@@ -4262,8 +4250,8 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 
 	txd_first->opts1 |= cpu_to_le32(DescOwn | FirstFrag);
 
-	/* Force all memory writes to complete before notifying device */
-	wmb();
+	/* rtl_tx needs to see descriptor changes before updated tp->cur_tx */
+	smp_wmb();
 
 	tp->cur_tx += frags + 1;
 
@@ -4308,6 +4296,37 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 	return NETDEV_TX_BUSY;
 }
 
+static unsigned int rtl_last_frag_len(struct sk_buff *skb)
+{
+	struct skb_shared_info *info = skb_shinfo(skb);
+	unsigned int nr_frags = info->nr_frags;
+
+	if (!nr_frags)
+		return UINT_MAX;
+
+	return skb_frag_size(info->frags + nr_frags - 1);
+}
+
+/* Workaround for hw issues with TSO on RTL8168evl */
+static netdev_features_t rtl8168evl_fix_tso(struct sk_buff *skb,
+					    netdev_features_t features)
+{
+	/* IPv4 header has options field */
+	if (vlan_get_protocol(skb) == htons(ETH_P_IP) &&
+	    ip_hdrlen(skb) > sizeof(struct iphdr))
+		features &= ~NETIF_F_ALL_TSO;
+
+	/* IPv4 TCP header has options field */
+	else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4 &&
+		 tcp_hdrlen(skb) > sizeof(struct tcphdr))
+		features &= ~NETIF_F_ALL_TSO;
+
+	else if (rtl_last_frag_len(skb) <= 6)
+		features &= ~NETIF_F_ALL_TSO;
+
+	return features;
+}
+
 static netdev_features_t rtl8169_features_check(struct sk_buff *skb,
 						struct net_device *dev,
 						netdev_features_t features)
@@ -4316,6 +4335,9 @@ static netdev_features_t rtl8169_features_check(struct sk_buff *skb,
 	struct rtl8169_private *tp = netdev_priv(dev);
 
 	if (skb_is_gso(skb)) {
+		if (tp->mac_version == RTL_GIGA_MAC_VER_34)
+			features = rtl8168evl_fix_tso(skb, features);
+
 		if (transport_offset > GTTCPHO_MAX &&
 		    rtl_chip_supports_csum_v2(tp))
 			features &= ~NETIF_F_ALL_TSO;
@@ -5164,20 +5186,19 @@ static int r8169_mdio_register(struct rtl8169_private *tp)
 	new_bus->read = r8169_mdio_read_reg;
 	new_bus->write = r8169_mdio_write_reg;
 
-	ret = mdiobus_register(new_bus);
+	ret = devm_mdiobus_register(new_bus);
 	if (ret)
 		return ret;
 
 	tp->phydev = mdiobus_get_phy(new_bus, 0);
 	if (!tp->phydev) {
-		mdiobus_unregister(new_bus);
 		return -ENODEV;
 	} else if (!tp->phydev->drv) {
 		/* Most chip versions fail with the genphy driver.
 		 * Therefore ensure that the dedicated PHY driver is loaded.
 		 */
-		dev_err(&pdev->dev, "realtek.ko not loaded, maybe it needs to be added to initramfs?\n");
-		mdiobus_unregister(new_bus);
+		dev_err(&pdev->dev, "no dedicated PHY driver found for PHY ID 0x%08x, maybe realtek.ko needs to be added to initramfs?\n",
+			tp->phydev->phy_id);
 		return -EUNATCH;
 	}
 
@@ -5189,8 +5210,6 @@ static int r8169_mdio_register(struct rtl8169_private *tp)
 
 static void rtl_hw_init_8168g(struct rtl8169_private *tp)
 {
-	tp->ocp_base = OCP_STD_PHY_BASE;
-
 	RTL_W32(tp, MISC, RTL_R32(tp, MISC) | RXDV_GATED_EN);
 
 	if (!rtl_udelay_loop_wait_high(tp, &rtl_txcfg_empty_cond, 100, 42))
@@ -5215,8 +5234,6 @@ static void rtl_hw_init_8168g(struct rtl8169_private *tp)
 
 static void rtl_hw_init_8125(struct rtl8169_private *tp)
 {
-	tp->ocp_base = OCP_STD_PHY_BASE;
-
 	RTL_W32(tp, MISC, RTL_R32(tp, MISC) | RXDV_GATED_EN);
 
 	if (!rtl_udelay_loop_wait_high(tp, &rtl_rxtx_empty_cond, 100, 42))
@@ -5353,6 +5370,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT);
 	tp->supports_gmii = ent->driver_data == RTL_CFG_NO_GBIT ? 0 : 1;
 	tp->eee_adv = -1;
+	tp->ocp_base = OCP_STD_PHY_BASE;
 
 	/* Get the *optional* external "ether_clk" used on some boards */
 	rc = rtl_get_ether_clk(tp);
@@ -5408,7 +5426,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	tp->mac_version = chipset;
 
-	tp->cp_cmd = RTL_R16(tp, CPlusCmd);
+	tp->cp_cmd = RTL_R16(tp, CPlusCmd) & CPCMD_MASK;
 
 	if (sizeof(dma_addr_t) > 4 && tp->mac_version >= RTL_GIGA_MAC_VER_18 &&
 	    !dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)))
@@ -5443,14 +5461,9 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
 			   NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
-	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
-		NETIF_F_HIGHDMA;
+	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
 	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
 
-	tp->cp_cmd |= RxChkSum;
-	/* RTL8125 uses register RxConfig for VLAN offloading config */
-	if (!rtl_is_8125(tp))
-		tp->cp_cmd |= RxVlan;
 	/*
 	 * Pretend we are using VLANs; This bypasses a nasty bug where
 	 * Interrupts stop flowing on high load on 8110SCd controllers.
@@ -5482,6 +5495,9 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->hw_features |= NETIF_F_RXALL;
 	dev->hw_features |= NETIF_F_RXFCS;
 
+	/* configure chip for default features */
+	rtl8169_set_features(dev, dev->features);
+
 	jumbo_max = rtl_jumbo_max(tp);
 	if (jumbo_max)
 		dev->max_mtu = jumbo_max;
@@ -5507,7 +5523,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	rc = register_netdev(dev);
 	if (rc)
-		goto err_mdio_unregister;
+		return rc;
 
 	netif_info(tp, probe, dev, "%s, %pM, XID %03x, IRQ %d\n",
 		   rtl_chip_infos[chipset].name, dev->dev_addr, xid,
@@ -5526,10 +5542,6 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		pm_runtime_put_sync(&pdev->dev);
 
 	return 0;
-
-err_mdio_unregister:
-	mdiobus_unregister(tp->phydev->mdio.bus);
-	return rc;
 }
 
 static struct pci_driver rtl8169_pci_driver = {
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 9e1c3752b200..64ca1b36b91e 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -37,7 +37,6 @@ config SMC91X
 	tristate "SMC 91C9x/91C1xxx support"
 	select CRC32
 	select MII
-	depends on !OF || GPIOLIB
 	depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
 		   MIPS || NIOS2 || SUPERH || XTENSA || H8300
 	---help---
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 90410f9d3b1a..605dc17290ef 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2190,6 +2190,7 @@ static const struct of_device_id smc91x_match[] = {
 };
 MODULE_DEVICE_TABLE(of, smc91x_match);
 
+#if defined(CONFIG_GPIOLIB)
 /**
  * of_try_set_control_gpio - configure a gpio if it exists
  */
@@ -2214,6 +2215,15 @@ static int try_toggle_control_gpio(struct device *dev,
 
 	return 0;
 }
+#else
+static int try_toggle_control_gpio(struct device *dev,
+				   struct gpio_desc **desc,
+				   const char *name, int index,
+				   int value, unsigned int nsdelay)
+{
+	return 0;
+}
+#endif
 #endif
 
 /*
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 6208a68a331d..127f75862962 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -473,6 +473,7 @@ struct mac_device_info {
 	unsigned int xlgmac;
 	unsigned int num_vlan;
 	u32 vlan_filter[32];
+	unsigned int promisc;
 };
 
 struct stmmac_rx_routing {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 28cac28253b8..61f3249bd724 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -90,6 +90,7 @@
 #define GMAC_VLAN_CSVL			BIT(19)
 #define GMAC_VLAN_VLC			GENMASK(17, 16)
 #define GMAC_VLAN_VLC_SHIFT		16
+#define GMAC_VLAN_VLHT			GENMASK(15, 0)
 
 /* MAC VLAN Tag */
 #define GMAC_VLAN_TAG_VID		GENMASK(15, 0)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 39692d15d80c..ecd834e0e121 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -450,6 +450,12 @@ static int dwmac4_add_hw_vlan_rx_fltr(struct net_device *dev,
 	if (vid > 4095)
 		return -EINVAL;
 
+	if (hw->promisc) {
+		netdev_err(dev,
+			   "Adding VLAN in promisc mode not supported\n");
+		return -EPERM;
+	}
+
 	/* Single Rx VLAN Filter */
 	if (hw->num_vlan == 1) {
 		/* For single VLAN filter, VID 0 means VLAN promiscuous */
@@ -499,6 +505,12 @@ static int dwmac4_del_hw_vlan_rx_fltr(struct net_device *dev,
 {
 	int i, ret = 0;
 
+	if (hw->promisc) {
+		netdev_err(dev,
+			   "Deleting VLAN in promisc mode not supported\n");
+		return -EPERM;
+	}
+
 	/* Single Rx VLAN Filter */
 	if (hw->num_vlan == 1) {
 		if ((hw->vlan_filter[0] & GMAC_VLAN_TAG_VID) == vid) {
@@ -523,9 +535,45 @@ static int dwmac4_del_hw_vlan_rx_fltr(struct net_device *dev,
 	return ret;
 }
 
+static void dwmac4_vlan_promisc_enable(struct net_device *dev,
+				       struct mac_device_info *hw)
+{
+	void __iomem *ioaddr = hw->pcsr;
+	u32 value;
+	u32 hash;
+	u32 val;
+	int i;
+
+	/* Single Rx VLAN Filter */
+	if (hw->num_vlan == 1) {
+		dwmac4_write_single_vlan(dev, 0);
+		return;
+	}
+
+	/* Extended Rx VLAN Filter Enable */
+	for (i = 0; i < hw->num_vlan; i++) {
+		if (hw->vlan_filter[i] & GMAC_VLAN_TAG_DATA_VEN) {
+			val = hw->vlan_filter[i] & ~GMAC_VLAN_TAG_DATA_VEN;
+			dwmac4_write_vlan_filter(dev, hw, i, val);
+		}
+	}
+
+	hash = readl(ioaddr + GMAC_VLAN_HASH_TABLE);
+	if (hash & GMAC_VLAN_VLHT) {
+		value = readl(ioaddr + GMAC_VLAN_TAG);
+		if (value & GMAC_VLAN_VTHM) {
+			value &= ~GMAC_VLAN_VTHM;
+			writel(value, ioaddr + GMAC_VLAN_TAG);
+		}
+	}
+}
+
 static void dwmac4_restore_hw_vlan_rx_fltr(struct net_device *dev,
 					   struct mac_device_info *hw)
 {
+	void __iomem *ioaddr = hw->pcsr;
+	u32 value;
+	u32 hash;
 	u32 val;
 	int i;
 
@@ -542,6 +590,13 @@ static void dwmac4_restore_hw_vlan_rx_fltr(struct net_device *dev,
 			dwmac4_write_vlan_filter(dev, hw, i, val);
 		}
 	}
+
+	hash = readl(ioaddr + GMAC_VLAN_HASH_TABLE);
+	if (hash & GMAC_VLAN_VLHT) {
+		value = readl(ioaddr + GMAC_VLAN_TAG);
+		value |= GMAC_VLAN_VTHM;
+		writel(value, ioaddr + GMAC_VLAN_TAG);
+	}
 }
 
 static void dwmac4_set_filter(struct mac_device_info *hw,
@@ -624,6 +679,18 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 		value |= GMAC_PACKET_FILTER_VTFE;
 
 	writel(value, ioaddr + GMAC_PACKET_FILTER);
+
+	if (dev->flags & IFF_PROMISC) {
+		if (!hw->promisc) {
+			hw->promisc = 1;
+			dwmac4_vlan_promisc_enable(dev, hw);
+		}
+	} else {
+		if (hw->promisc) {
+			hw->promisc = 0;
+			dwmac4_restore_hw_vlan_rx_fltr(dev, hw);
+		}
+	}
 }
 
 static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index e6d1aa882fa5..3ee6ab104cb9 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -5059,7 +5059,7 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (cp->cas_flags & CAS_FLAG_SATURN)
 		cas_saturn_firmware_init(cp);
 
-	cp->init_block = (struct cas_init_block *)
+	cp->init_block =
 		pci_alloc_consistent(pdev, sizeof(struct cas_init_block),
 				     &cp->block_dvma);
 	if (!cp->init_block) {
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index c2c5bf87da01..09f98fa2fb4e 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1569,6 +1569,12 @@ static int cpsw_probe(struct platform_device *pdev)
 		return irq;
 	cpsw->irqs_table[1] = irq;
 
+	/* get misc irq*/
+	irq = platform_get_irq(pdev, 3);
+	if (irq <= 0)
+		return irq;
+	cpsw->misc_irq = irq;
+
 	/*
 	 * This may be required here for child devices.
 	 */
@@ -1703,6 +1709,21 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_unregister_netdev_ret;
 	}
 
+	if (!cpsw->cpts)
+		goto skip_cpts;
+
+	ret = devm_request_irq(&pdev->dev, cpsw->misc_irq, cpsw_misc_interrupt,
+			       0, dev_name(&pdev->dev), cpsw);
+	if (ret < 0) {
+		dev_err(dev, "error attaching misc irq (%d)\n", ret);
+		goto clean_unregister_netdev_ret;
+	}
+
+	/* Enable misc CPTS evnt_pend IRQ */
+	cpts_set_irqpoll(cpsw->cpts, false);
+	writel(0x10, &cpsw->wr_regs->misc_en);
+
+skip_cpts:
 	cpsw_notice(priv, probe,
 		    "initialized device (regs %pa, irq %d, pool size %d)\n",
 		    &ss_res->start, cpsw->irqs_table[0], descs_pool_size);
diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c
index 9209e613257d..33c8dd686206 100644
--- a/drivers/net/ethernet/ti/cpsw_new.c
+++ b/drivers/net/ethernet/ti/cpsw_new.c
@@ -1896,6 +1896,11 @@ static int cpsw_probe(struct platform_device *pdev)
 		return irq;
 	cpsw->irqs_table[1] = irq;
 
+	irq = platform_get_irq_byname(pdev, "misc");
+	if (irq <= 0)
+		return irq;
+	cpsw->misc_irq = irq;
+
 	platform_set_drvdata(pdev, cpsw);
 	/* This may be required here for child devices. */
 	pm_runtime_enable(dev);
@@ -1975,6 +1980,21 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_unregister_netdev;
 	}
 
+	if (!cpsw->cpts)
+		goto skip_cpts;
+
+	ret = devm_request_irq(dev, cpsw->misc_irq, cpsw_misc_interrupt,
+			       0, dev_name(&pdev->dev), cpsw);
+	if (ret < 0) {
+		dev_err(dev, "error attaching misc irq (%d)\n", ret);
+		goto clean_unregister_netdev;
+	}
+
+	/* Enable misc CPTS evnt_pend IRQ */
+	cpts_set_irqpoll(cpsw->cpts, false);
+	writel(0x10, &cpsw->wr_regs->misc_en);
+
+skip_cpts:
 	ret = cpsw_register_notifiers(cpsw);
 	if (ret)
 		goto clean_unregister_netdev;
diff --git a/drivers/net/ethernet/ti/cpsw_priv.c b/drivers/net/ethernet/ti/cpsw_priv.c
index 97a058ca60ac..9d098c802c6d 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.c
+++ b/drivers/net/ethernet/ti/cpsw_priv.c
@@ -28,6 +28,8 @@
 #include "cpsw_sl.h"
 #include "davinci_cpdma.h"
 
+#define CPTS_N_ETX_TS 4
+
 int (*cpsw_slave_index)(struct cpsw_common *cpsw, struct cpsw_priv *priv);
 
 void cpsw_intr_enable(struct cpsw_common *cpsw)
@@ -112,6 +114,18 @@ irqreturn_t cpsw_rx_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+irqreturn_t cpsw_misc_interrupt(int irq, void *dev_id)
+{
+	struct cpsw_common *cpsw = dev_id;
+
+	writel(0, &cpsw->wr_regs->misc_en);
+	cpdma_ctlr_eoi(cpsw->dma, CPDMA_EOI_MISC);
+	cpts_misc_interrupt(cpsw->cpts);
+	writel(0x10, &cpsw->wr_regs->misc_en);
+
+	return IRQ_HANDLED;
+}
+
 int cpsw_tx_mq_poll(struct napi_struct *napi_tx, int budget)
 {
 	struct cpsw_common	*cpsw = napi_to_cpsw(napi_tx);
@@ -522,7 +536,8 @@ int cpsw_init_common(struct cpsw_common *cpsw, void __iomem *ss_regs,
 	if (!cpts_node)
 		cpts_node = cpsw->dev->of_node;
 
-	cpsw->cpts = cpts_create(cpsw->dev, cpts_regs, cpts_node);
+	cpsw->cpts = cpts_create(cpsw->dev, cpts_regs, cpts_node,
+				 CPTS_N_ETX_TS);
 	if (IS_ERR(cpsw->cpts)) {
 		ret = PTR_ERR(cpsw->cpts);
 		cpdma_ctlr_destroy(cpsw->dma);
diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h
index b8d7b924ee3d..bf4e179b4ca4 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.h
+++ b/drivers/net/ethernet/ti/cpsw_priv.h
@@ -350,6 +350,7 @@ struct cpsw_common {
 	bool				rx_irq_disabled;
 	bool				tx_irq_disabled;
 	u32 irqs_table[IRQ_NUM];
+	int misc_irq;
 	struct cpts			*cpts;
 	struct devlink *devlink;
 	int				rx_ch_num, tx_ch_num;
@@ -442,6 +443,7 @@ int cpsw_run_xdp(struct cpsw_priv *priv, int ch, struct xdp_buff *xdp,
 		 struct page *page, int port);
 irqreturn_t cpsw_tx_interrupt(int irq, void *dev_id);
 irqreturn_t cpsw_rx_interrupt(int irq, void *dev_id);
+irqreturn_t cpsw_misc_interrupt(int irq, void *dev_id);
 int cpsw_tx_mq_poll(struct napi_struct *napi_tx, int budget);
 int cpsw_tx_poll(struct napi_struct *napi_tx, int budget);
 int cpsw_rx_mq_poll(struct napi_struct *napi_rx, int budget);
diff --git a/drivers/net/ethernet/ti/cpts.c b/drivers/net/ethernet/ti/cpts.c
index 729ce09dded9..7c55d395de2c 100644
--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -21,16 +21,21 @@
 #include "cpts.h"
 
 #define CPTS_SKB_TX_WORK_TIMEOUT 1 /* jiffies */
+#define CPTS_SKB_RX_TX_TMO 100 /*ms */
+#define CPTS_EVENT_RX_TX_TIMEOUT (100) /* ms */
 
 struct cpts_skb_cb_data {
+	u32 skb_mtype_seqid;
 	unsigned long tmo;
 };
 
 #define cpts_read32(c, r)	readl_relaxed(&c->reg->r)
 #define cpts_write32(c, v, r)	writel_relaxed(v, &c->reg->r)
 
-static int cpts_match(struct sk_buff *skb, unsigned int ptp_class,
-		      u16 ts_seqid, u8 ts_msgtype);
+static int cpts_event_port(struct cpts_event *event)
+{
+	return (event->high >> PORT_NUMBER_SHIFT) & PORT_NUMBER_MASK;
+}
 
 static int event_expired(struct cpts_event *event)
 {
@@ -71,7 +76,7 @@ static int cpts_purge_events(struct cpts *cpts)
 	}
 
 	if (removed)
-		pr_debug("cpts: event pool cleaned up %d\n", removed);
+		dev_dbg(cpts->dev, "cpts: event pool cleaned up %d\n", removed);
 	return removed ? 0 : -1;
 }
 
@@ -94,132 +99,126 @@ static void cpts_purge_txq(struct cpts *cpts)
 		dev_dbg(cpts->dev, "txq cleaned up %d\n", removed);
 }
 
-static bool cpts_match_tx_ts(struct cpts *cpts, struct cpts_event *event)
-{
-	struct sk_buff *skb, *tmp;
-	u16 seqid;
-	u8 mtype;
-	bool found = false;
-
-	mtype = (event->high >> MESSAGE_TYPE_SHIFT) & MESSAGE_TYPE_MASK;
-	seqid = (event->high >> SEQUENCE_ID_SHIFT) & SEQUENCE_ID_MASK;
-
-	/* no need to grab txq.lock as access is always done under cpts->lock */
-	skb_queue_walk_safe(&cpts->txq, skb, tmp) {
-		struct skb_shared_hwtstamps ssh;
-		unsigned int class = ptp_classify_raw(skb);
-		struct cpts_skb_cb_data *skb_cb =
-					(struct cpts_skb_cb_data *)skb->cb;
-
-		if (cpts_match(skb, class, seqid, mtype)) {
-			u64 ns = timecounter_cyc2time(&cpts->tc, event->low);
-
-			memset(&ssh, 0, sizeof(ssh));
-			ssh.hwtstamp = ns_to_ktime(ns);
-			skb_tstamp_tx(skb, &ssh);
-			found = true;
-			__skb_unlink(skb, &cpts->txq);
-			dev_consume_skb_any(skb);
-			dev_dbg(cpts->dev, "match tx timestamp mtype %u seqid %04x\n",
-				mtype, seqid);
-			break;
-		}
-
-		if (time_after(jiffies, skb_cb->tmo)) {
-			/* timeout any expired skbs over 1s */
-			dev_dbg(cpts->dev, "expiring tx timestamp from txq\n");
-			__skb_unlink(skb, &cpts->txq);
-			dev_consume_skb_any(skb);
-		}
-	}
-
-	return found;
-}
-
 /*
  * Returns zero if matching event type was found.
  */
 static int cpts_fifo_read(struct cpts *cpts, int match)
 {
+	struct ptp_clock_event pevent;
+	bool need_schedule = false;
+	struct cpts_event *event;
+	unsigned long flags;
 	int i, type = -1;
 	u32 hi, lo;
-	struct cpts_event *event;
+
+	spin_lock_irqsave(&cpts->lock, flags);
 
 	for (i = 0; i < CPTS_FIFO_DEPTH; i++) {
 		if (cpts_fifo_pop(cpts, &hi, &lo))
 			break;
 
 		if (list_empty(&cpts->pool) && cpts_purge_events(cpts)) {
-			pr_err("cpts: event pool empty\n");
-			return -1;
+			dev_warn(cpts->dev, "cpts: event pool empty\n");
+			break;
 		}
 
 		event = list_first_entry(&cpts->pool, struct cpts_event, list);
-		event->tmo = jiffies + 2;
 		event->high = hi;
 		event->low = lo;
+		event->timestamp = timecounter_cyc2time(&cpts->tc, event->low);
 		type = event_type(event);
+
+		dev_dbg(cpts->dev, "CPTS_EV: %d high:%08X low:%08x\n",
+			type, event->high, event->low);
 		switch (type) {
-		case CPTS_EV_TX:
-			if (cpts_match_tx_ts(cpts, event)) {
-				/* if the new event matches an existing skb,
-				 * then don't queue it
-				 */
-				break;
-			}
-			/* fall through */
 		case CPTS_EV_PUSH:
+			WRITE_ONCE(cpts->cur_timestamp, lo);
+			timecounter_read(&cpts->tc);
+			if (cpts->mult_new) {
+				cpts->cc.mult = cpts->mult_new;
+				cpts->mult_new = 0;
+			}
+			if (!cpts->irq_poll)
+				complete(&cpts->ts_push_complete);
+			break;
+		case CPTS_EV_TX:
 		case CPTS_EV_RX:
+			event->tmo = jiffies +
+				msecs_to_jiffies(CPTS_EVENT_RX_TX_TIMEOUT);
+
 			list_del_init(&event->list);
 			list_add_tail(&event->list, &cpts->events);
+			need_schedule = true;
 			break;
 		case CPTS_EV_ROLL:
 		case CPTS_EV_HALF:
+			break;
 		case CPTS_EV_HW:
+			pevent.timestamp = event->timestamp;
+			pevent.type = PTP_CLOCK_EXTTS;
+			pevent.index = cpts_event_port(event) - 1;
+			ptp_clock_event(cpts->clock, &pevent);
 			break;
 		default:
-			pr_err("cpts: unknown event type\n");
+			dev_err(cpts->dev, "cpts: unknown event type\n");
 			break;
 		}
 		if (type == match)
 			break;
 	}
+
+	spin_unlock_irqrestore(&cpts->lock, flags);
+
+	if (!cpts->irq_poll && need_schedule)
+		ptp_schedule_worker(cpts->clock, 0);
+
 	return type == match ? 0 : -1;
 }
 
+void cpts_misc_interrupt(struct cpts *cpts)
+{
+	cpts_fifo_read(cpts, -1);
+}
+EXPORT_SYMBOL_GPL(cpts_misc_interrupt);
+
 static u64 cpts_systim_read(const struct cyclecounter *cc)
 {
-	u64 val = 0;
-	struct cpts_event *event;
-	struct list_head *this, *next;
 	struct cpts *cpts = container_of(cc, struct cpts, cc);
 
+	return READ_ONCE(cpts->cur_timestamp);
+}
+
+static void cpts_update_cur_time(struct cpts *cpts, int match,
+				 struct ptp_system_timestamp *sts)
+{
+	unsigned long flags;
+
+	reinit_completion(&cpts->ts_push_complete);
+
+	/* use spin_lock_irqsave() here as it has to run very fast */
+	spin_lock_irqsave(&cpts->lock, flags);
+	ptp_read_system_prets(sts);
 	cpts_write32(cpts, TS_PUSH, ts_push);
-	if (cpts_fifo_read(cpts, CPTS_EV_PUSH))
-		pr_err("cpts: unable to obtain a time stamp\n");
+	cpts_read32(cpts, ts_push);
+	ptp_read_system_postts(sts);
+	spin_unlock_irqrestore(&cpts->lock, flags);
 
-	list_for_each_safe(this, next, &cpts->events) {
-		event = list_entry(this, struct cpts_event, list);
-		if (event_type(event) == CPTS_EV_PUSH) {
-			list_del_init(&event->list);
-			list_add(&event->list, &cpts->pool);
-			val = event->low;
-			break;
-		}
-	}
+	if (cpts->irq_poll && cpts_fifo_read(cpts, match) && match != -1)
+		dev_err(cpts->dev, "cpts: unable to obtain a time stamp\n");
 
-	return val;
+	if (!cpts->irq_poll &&
+	    !wait_for_completion_timeout(&cpts->ts_push_complete, HZ))
+		dev_err(cpts->dev, "cpts: obtain a time stamp timeout\n");
 }
 
 /* PTP clock operations */
 
 static int cpts_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
 {
-	u64 adj;
-	u32 diff, mult;
-	int neg_adj = 0;
-	unsigned long flags;
 	struct cpts *cpts = container_of(ptp, struct cpts, info);
+	int neg_adj = 0;
+	u32 diff, mult;
+	u64 adj;
 
 	if (ppb < 0) {
 		neg_adj = 1;
@@ -230,38 +229,40 @@ static int cpts_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
 	adj *= ppb;
 	diff = div_u64(adj, 1000000000ULL);
 
-	spin_lock_irqsave(&cpts->lock, flags);
+	mutex_lock(&cpts->ptp_clk_mutex);
 
-	timecounter_read(&cpts->tc);
+	cpts->mult_new = neg_adj ? mult - diff : mult + diff;
 
-	cpts->cc.mult = neg_adj ? mult - diff : mult + diff;
-
-	spin_unlock_irqrestore(&cpts->lock, flags);
+	cpts_update_cur_time(cpts, CPTS_EV_PUSH, NULL);
 
+	mutex_unlock(&cpts->ptp_clk_mutex);
 	return 0;
 }
 
 static int cpts_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
 {
-	unsigned long flags;
 	struct cpts *cpts = container_of(ptp, struct cpts, info);
 
-	spin_lock_irqsave(&cpts->lock, flags);
+	mutex_lock(&cpts->ptp_clk_mutex);
 	timecounter_adjtime(&cpts->tc, delta);
-	spin_unlock_irqrestore(&cpts->lock, flags);
+	mutex_unlock(&cpts->ptp_clk_mutex);
 
 	return 0;
 }
 
-static int cpts_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
+static int cpts_ptp_gettimeex(struct ptp_clock_info *ptp,
+			      struct timespec64 *ts,
+			      struct ptp_system_timestamp *sts)
 {
-	u64 ns;
-	unsigned long flags;
 	struct cpts *cpts = container_of(ptp, struct cpts, info);
+	u64 ns;
+
+	mutex_lock(&cpts->ptp_clk_mutex);
+
+	cpts_update_cur_time(cpts, CPTS_EV_PUSH, sts);
 
-	spin_lock_irqsave(&cpts->lock, flags);
 	ns = timecounter_read(&cpts->tc);
-	spin_unlock_irqrestore(&cpts->lock, flags);
+	mutex_unlock(&cpts->ptp_clk_mutex);
 
 	*ts = ns_to_timespec64(ns);
 
@@ -271,15 +272,38 @@ static int cpts_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
 static int cpts_ptp_settime(struct ptp_clock_info *ptp,
 			    const struct timespec64 *ts)
 {
-	u64 ns;
-	unsigned long flags;
 	struct cpts *cpts = container_of(ptp, struct cpts, info);
+	u64 ns;
 
 	ns = timespec64_to_ns(ts);
 
-	spin_lock_irqsave(&cpts->lock, flags);
+	mutex_lock(&cpts->ptp_clk_mutex);
 	timecounter_init(&cpts->tc, &cpts->cc, ns);
-	spin_unlock_irqrestore(&cpts->lock, flags);
+	mutex_unlock(&cpts->ptp_clk_mutex);
+
+	return 0;
+}
+
+static int cpts_extts_enable(struct cpts *cpts, u32 index, int on)
+{
+	u32 v;
+
+	if (((cpts->hw_ts_enable & BIT(index)) >> index) == on)
+		return 0;
+
+	mutex_lock(&cpts->ptp_clk_mutex);
+
+	v = cpts_read32(cpts, control);
+	if (on) {
+		v |= BIT(8 + index);
+		cpts->hw_ts_enable |= BIT(index);
+	} else {
+		v &= ~BIT(8 + index);
+		cpts->hw_ts_enable &= ~BIT(index);
+	}
+	cpts_write32(cpts, v, control);
+
+	mutex_unlock(&cpts->ptp_clk_mutex);
 
 	return 0;
 }
@@ -287,28 +311,120 @@ static int cpts_ptp_settime(struct ptp_clock_info *ptp,
 static int cpts_ptp_enable(struct ptp_clock_info *ptp,
 			   struct ptp_clock_request *rq, int on)
 {
+	struct cpts *cpts = container_of(ptp, struct cpts, info);
+
+	switch (rq->type) {
+	case PTP_CLK_REQ_EXTTS:
+		return cpts_extts_enable(cpts, rq->extts.index, on);
+	default:
+		break;
+	}
+
 	return -EOPNOTSUPP;
 }
 
+static bool cpts_match_tx_ts(struct cpts *cpts, struct cpts_event *event)
+{
+	struct sk_buff_head txq_list;
+	struct sk_buff *skb, *tmp;
+	unsigned long flags;
+	bool found = false;
+	u32 mtype_seqid;
+
+	mtype_seqid = event->high &
+		      ((MESSAGE_TYPE_MASK << MESSAGE_TYPE_SHIFT) |
+		       (SEQUENCE_ID_MASK << SEQUENCE_ID_SHIFT) |
+		       (EVENT_TYPE_MASK << EVENT_TYPE_SHIFT));
+
+	__skb_queue_head_init(&txq_list);
+
+	spin_lock_irqsave(&cpts->txq.lock, flags);
+	skb_queue_splice_init(&cpts->txq, &txq_list);
+	spin_unlock_irqrestore(&cpts->txq.lock, flags);
+
+	skb_queue_walk_safe(&txq_list, skb, tmp) {
+		struct skb_shared_hwtstamps ssh;
+		struct cpts_skb_cb_data *skb_cb =
+					(struct cpts_skb_cb_data *)skb->cb;
+
+		if (mtype_seqid == skb_cb->skb_mtype_seqid) {
+			memset(&ssh, 0, sizeof(ssh));
+			ssh.hwtstamp = ns_to_ktime(event->timestamp);
+			skb_tstamp_tx(skb, &ssh);
+			found = true;
+			__skb_unlink(skb, &txq_list);
+			dev_consume_skb_any(skb);
+			dev_dbg(cpts->dev, "match tx timestamp mtype_seqid %08x\n",
+				mtype_seqid);
+			break;
+		}
+
+		if (time_after(jiffies, skb_cb->tmo)) {
+			/* timeout any expired skbs over 1s */
+			dev_dbg(cpts->dev, "expiring tx timestamp from txq\n");
+			__skb_unlink(skb, &txq_list);
+			dev_consume_skb_any(skb);
+		}
+	}
+
+	spin_lock_irqsave(&cpts->txq.lock, flags);
+	skb_queue_splice(&txq_list, &cpts->txq);
+	spin_unlock_irqrestore(&cpts->txq.lock, flags);
+
+	return found;
+}
+
+static void cpts_process_events(struct cpts *cpts)
+{
+	struct list_head *this, *next;
+	struct cpts_event *event;
+	LIST_HEAD(events_free);
+	unsigned long flags;
+	LIST_HEAD(events);
+
+	spin_lock_irqsave(&cpts->lock, flags);
+	list_splice_init(&cpts->events, &events);
+	spin_unlock_irqrestore(&cpts->lock, flags);
+
+	list_for_each_safe(this, next, &events) {
+		event = list_entry(this, struct cpts_event, list);
+		if (cpts_match_tx_ts(cpts, event) ||
+		    time_after(jiffies, event->tmo)) {
+			list_del_init(&event->list);
+			list_add(&event->list, &events_free);
+		}
+	}
+
+	spin_lock_irqsave(&cpts->lock, flags);
+	list_splice_tail(&events, &cpts->events);
+	list_splice_tail(&events_free, &cpts->pool);
+	spin_unlock_irqrestore(&cpts->lock, flags);
+}
+
 static long cpts_overflow_check(struct ptp_clock_info *ptp)
 {
 	struct cpts *cpts = container_of(ptp, struct cpts, info);
 	unsigned long delay = cpts->ov_check_period;
-	struct timespec64 ts;
 	unsigned long flags;
+	u64 ns;
 
-	spin_lock_irqsave(&cpts->lock, flags);
-	ts = ns_to_timespec64(timecounter_read(&cpts->tc));
+	mutex_lock(&cpts->ptp_clk_mutex);
+
+	cpts_update_cur_time(cpts, -1, NULL);
+	ns = timecounter_read(&cpts->tc);
+
+	cpts_process_events(cpts);
 
+	spin_lock_irqsave(&cpts->txq.lock, flags);
 	if (!skb_queue_empty(&cpts->txq)) {
 		cpts_purge_txq(cpts);
 		if (!skb_queue_empty(&cpts->txq))
 			delay = CPTS_SKB_TX_WORK_TIMEOUT;
 	}
-	spin_unlock_irqrestore(&cpts->lock, flags);
+	spin_unlock_irqrestore(&cpts->txq.lock, flags);
 
-	pr_debug("cpts overflow check at %lld.%09ld\n",
-		 (long long)ts.tv_sec, ts.tv_nsec);
+	dev_dbg(cpts->dev, "cpts overflow check at %lld\n", ns);
+	mutex_unlock(&cpts->ptp_clk_mutex);
 	return (long)delay;
 }
 
@@ -321,18 +437,21 @@ static const struct ptp_clock_info cpts_info = {
 	.pps		= 0,
 	.adjfreq	= cpts_ptp_adjfreq,
 	.adjtime	= cpts_ptp_adjtime,
-	.gettime64	= cpts_ptp_gettime,
+	.gettimex64	= cpts_ptp_gettimeex,
 	.settime64	= cpts_ptp_settime,
 	.enable		= cpts_ptp_enable,
 	.do_aux_work	= cpts_overflow_check,
 };
 
-static int cpts_match(struct sk_buff *skb, unsigned int ptp_class,
-		      u16 ts_seqid, u8 ts_msgtype)
+static int cpts_skb_get_mtype_seqid(struct sk_buff *skb, u32 *mtype_seqid)
 {
-	u16 *seqid;
-	unsigned int offset = 0;
+	unsigned int ptp_class = ptp_classify_raw(skb);
 	u8 *msgtype, *data = skb->data;
+	unsigned int offset = 0;
+	u16 *seqid;
+
+	if (ptp_class == PTP_CLASS_NONE)
+		return 0;
 
 	if (ptp_class & PTP_CLASS_VLAN)
 		offset += VLAN_HLEN;
@@ -360,25 +479,23 @@ static int cpts_match(struct sk_buff *skb, unsigned int ptp_class,
 		msgtype = data + offset;
 
 	seqid = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID);
+	*mtype_seqid = (*msgtype & MESSAGE_TYPE_MASK) << MESSAGE_TYPE_SHIFT;
+	*mtype_seqid |= (ntohs(*seqid) & SEQUENCE_ID_MASK) << SEQUENCE_ID_SHIFT;
 
-	return (ts_msgtype == (*msgtype & 0xf) && ts_seqid == ntohs(*seqid));
+	return 1;
 }
 
-static u64 cpts_find_ts(struct cpts *cpts, struct sk_buff *skb, int ev_type)
+static u64 cpts_find_ts(struct cpts *cpts, struct sk_buff *skb,
+			int ev_type, u32 skb_mtype_seqid)
 {
-	u64 ns = 0;
-	struct cpts_event *event;
 	struct list_head *this, *next;
-	unsigned int class = ptp_classify_raw(skb);
+	struct cpts_event *event;
 	unsigned long flags;
-	u16 seqid;
-	u8 mtype;
-
-	if (class == PTP_CLASS_NONE)
-		return 0;
+	u32 mtype_seqid;
+	u64 ns = 0;
 
-	spin_lock_irqsave(&cpts->lock, flags);
 	cpts_fifo_read(cpts, -1);
+	spin_lock_irqsave(&cpts->lock, flags);
 	list_for_each_safe(this, next, &cpts->events) {
 		event = list_entry(this, struct cpts_event, list);
 		if (event_expired(event)) {
@@ -386,29 +503,19 @@ static u64 cpts_find_ts(struct cpts *cpts, struct sk_buff *skb, int ev_type)
 			list_add(&event->list, &cpts->pool);
 			continue;
 		}
-		mtype = (event->high >> MESSAGE_TYPE_SHIFT) & MESSAGE_TYPE_MASK;
-		seqid = (event->high >> SEQUENCE_ID_SHIFT) & SEQUENCE_ID_MASK;
-		if (ev_type == event_type(event) &&
-		    cpts_match(skb, class, seqid, mtype)) {
-			ns = timecounter_cyc2time(&cpts->tc, event->low);
+
+		mtype_seqid = event->high &
+			      ((MESSAGE_TYPE_MASK << MESSAGE_TYPE_SHIFT) |
+			       (SEQUENCE_ID_MASK << SEQUENCE_ID_SHIFT) |
+			       (EVENT_TYPE_MASK << EVENT_TYPE_SHIFT));
+
+		if (mtype_seqid == skb_mtype_seqid) {
+			ns = event->timestamp;
 			list_del_init(&event->list);
 			list_add(&event->list, &cpts->pool);
 			break;
 		}
 	}
-
-	if (ev_type == CPTS_EV_TX && !ns) {
-		struct cpts_skb_cb_data *skb_cb =
-				(struct cpts_skb_cb_data *)skb->cb;
-		/* Not found, add frame to queue for processing later.
-		 * The periodic FIFO check will handle this.
-		 */
-		skb_get(skb);
-		/* get the timestamp for timeouts */
-		skb_cb->tmo = jiffies + msecs_to_jiffies(100);
-		__skb_queue_tail(&cpts->txq, skb);
-		ptp_schedule_worker(cpts->clock, 0);
-	}
 	spin_unlock_irqrestore(&cpts->lock, flags);
 
 	return ns;
@@ -416,10 +523,21 @@ static u64 cpts_find_ts(struct cpts *cpts, struct sk_buff *skb, int ev_type)
 
 void cpts_rx_timestamp(struct cpts *cpts, struct sk_buff *skb)
 {
-	u64 ns;
+	struct cpts_skb_cb_data *skb_cb = (struct cpts_skb_cb_data *)skb->cb;
 	struct skb_shared_hwtstamps *ssh;
+	int ret;
+	u64 ns;
 
-	ns = cpts_find_ts(cpts, skb, CPTS_EV_RX);
+	ret = cpts_skb_get_mtype_seqid(skb, &skb_cb->skb_mtype_seqid);
+	if (!ret)
+		return;
+
+	skb_cb->skb_mtype_seqid |= (CPTS_EV_RX << EVENT_TYPE_SHIFT);
+
+	dev_dbg(cpts->dev, "%s mtype seqid %08x\n",
+		__func__, skb_cb->skb_mtype_seqid);
+
+	ns = cpts_find_ts(cpts, skb, CPTS_EV_RX, skb_cb->skb_mtype_seqid);
 	if (!ns)
 		return;
 	ssh = skb_hwtstamps(skb);
@@ -430,17 +548,27 @@ EXPORT_SYMBOL_GPL(cpts_rx_timestamp);
 
 void cpts_tx_timestamp(struct cpts *cpts, struct sk_buff *skb)
 {
-	u64 ns;
-	struct skb_shared_hwtstamps ssh;
+	struct cpts_skb_cb_data *skb_cb = (struct cpts_skb_cb_data *)skb->cb;
+	int ret;
 
 	if (!(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))
 		return;
-	ns = cpts_find_ts(cpts, skb, CPTS_EV_TX);
-	if (!ns)
+
+	ret = cpts_skb_get_mtype_seqid(skb, &skb_cb->skb_mtype_seqid);
+	if (!ret)
 		return;
-	memset(&ssh, 0, sizeof(ssh));
-	ssh.hwtstamp = ns_to_ktime(ns);
-	skb_tstamp_tx(skb, &ssh);
+
+	skb_cb->skb_mtype_seqid |= (CPTS_EV_TX << EVENT_TYPE_SHIFT);
+
+	dev_dbg(cpts->dev, "%s mtype seqid %08x\n",
+		__func__, skb_cb->skb_mtype_seqid);
+
+	/* Always defer TX TS processing to PTP worker */
+	skb_get(skb);
+	/* get the timestamp for timeouts */
+	skb_cb->tmo = jiffies + msecs_to_jiffies(CPTS_SKB_RX_TX_TMO);
+	skb_queue_tail(&cpts->txq, skb);
+	ptp_schedule_worker(cpts->clock, 0);
 }
 EXPORT_SYMBOL_GPL(cpts_tx_timestamp);
 
@@ -632,7 +760,7 @@ static int cpts_of_parse(struct cpts *cpts, struct device_node *node)
 }
 
 struct cpts *cpts_create(struct device *dev, void __iomem *regs,
-			 struct device_node *node)
+			 struct device_node *node, u32 n_ext_ts)
 {
 	struct cpts *cpts;
 	int ret;
@@ -643,7 +771,10 @@ struct cpts *cpts_create(struct device *dev, void __iomem *regs,
 
 	cpts->dev = dev;
 	cpts->reg = (struct cpsw_cpts __iomem *)regs;
+	cpts->irq_poll = true;
 	spin_lock_init(&cpts->lock);
+	mutex_init(&cpts->ptp_clk_mutex);
+	init_completion(&cpts->ts_push_complete);
 
 	ret = cpts_of_parse(cpts, node);
 	if (ret)
@@ -668,6 +799,9 @@ struct cpts *cpts_create(struct device *dev, void __iomem *regs,
 	cpts->cc.mask = CLOCKSOURCE_MASK(32);
 	cpts->info = cpts_info;
 
+	if (n_ext_ts)
+		cpts->info.n_ext_ts = n_ext_ts;
+
 	cpts_calc_mult_shift(cpts);
 	/* save cc.mult original value as it can be modified
 	 * by cpts_ptp_adjfreq().
diff --git a/drivers/net/ethernet/ti/cpts.h b/drivers/net/ethernet/ti/cpts.h
index bb997c11ee15..07222f651d2e 100644
--- a/drivers/net/ethernet/ti/cpts.h
+++ b/drivers/net/ethernet/ti/cpts.h
@@ -94,6 +94,7 @@ struct cpts_event {
 	unsigned long tmo;
 	u32 high;
 	u32 low;
+	u64 timestamp;
 };
 
 struct cpts {
@@ -103,7 +104,7 @@ struct cpts {
 	int rx_enable;
 	struct ptp_clock_info info;
 	struct ptp_clock *clock;
-	spinlock_t lock; /* protects time registers */
+	spinlock_t lock; /* protects fifo/events */
 	u32 cc_mult; /* for the nominal frequency */
 	struct cyclecounter cc;
 	struct timecounter tc;
@@ -114,6 +115,12 @@ struct cpts {
 	struct cpts_event pool_data[CPTS_MAX_EVENTS];
 	unsigned long ov_check_period;
 	struct sk_buff_head txq;
+	u64 cur_timestamp;
+	u32 mult_new;
+	struct mutex ptp_clk_mutex; /* sync PTP interface and worker */
+	bool irq_poll;
+	struct completion	ts_push_complete;
+	u32 hw_ts_enable;
 };
 
 void cpts_rx_timestamp(struct cpts *cpts, struct sk_buff *skb);
@@ -121,8 +128,9 @@ void cpts_tx_timestamp(struct cpts *cpts, struct sk_buff *skb);
 int cpts_register(struct cpts *cpts);
 void cpts_unregister(struct cpts *cpts);
 struct cpts *cpts_create(struct device *dev, void __iomem *regs,
-			 struct device_node *node);
+			 struct device_node *node, u32 n_ext_ts);
 void cpts_release(struct cpts *cpts);
+void cpts_misc_interrupt(struct cpts *cpts);
 
 static inline bool cpts_can_timestamp(struct cpts *cpts, struct sk_buff *skb)
 {
@@ -134,6 +142,11 @@ static inline bool cpts_can_timestamp(struct cpts *cpts, struct sk_buff *skb)
 	return true;
 }
 
+static inline void cpts_set_irqpoll(struct cpts *cpts, bool en)
+{
+	cpts->irq_poll = en;
+}
+
 #else
 struct cpts;
 
@@ -146,7 +159,7 @@ static inline void cpts_tx_timestamp(struct cpts *cpts, struct sk_buff *skb)
 
 static inline
 struct cpts *cpts_create(struct device *dev, void __iomem *regs,
-			 struct device_node *node)
+			 struct device_node *node, u32 n_ext_ts)
 {
 	return NULL;
 }
@@ -169,6 +182,14 @@ static inline bool cpts_can_timestamp(struct cpts *cpts, struct sk_buff *skb)
 {
 	return false;
 }
+
+static inline void cpts_misc_interrupt(struct cpts *cpts)
+{
+}
+
+static inline void cpts_set_irqpoll(struct cpts *cpts, bool en)
+{
+}
 #endif
 
 
diff --git a/drivers/net/ethernet/ti/k3-cppi-desc-pool.c b/drivers/net/ethernet/ti/k3-cppi-desc-pool.c
index ad7cfc1316ce..38cc12f9f133 100644
--- a/drivers/net/ethernet/ti/k3-cppi-desc-pool.c
+++ b/drivers/net/ethernet/ti/k3-cppi-desc-pool.c
@@ -64,8 +64,8 @@ k3_cppi_desc_pool_create_name(struct device *dev, size_t size,
 		return ERR_PTR(-ENOMEM);
 
 	pool->gen_pool = gen_pool_create(ilog2(pool->desc_size), -1);
-	if (IS_ERR(pool->gen_pool)) {
-		ret = PTR_ERR(pool->gen_pool);
+	if (!pool->gen_pool) {
+		ret = -ENOMEM;
 		dev_err(pool->dev, "pool create failed %d\n", ret);
 		kfree_const(pool_name);
 		goto gen_pool_create_fail;
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index fb36115e9c51..9d6e27fb710e 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -3716,7 +3716,8 @@ static int gbe_probe(struct netcp_device *netcp_device, struct device *dev,
 	if (!cpts_node)
 		cpts_node = of_node_get(node);
 
-	gbe_dev->cpts = cpts_create(gbe_dev->dev, gbe_dev->cpts_reg, cpts_node);
+	gbe_dev->cpts = cpts_create(gbe_dev->dev, gbe_dev->cpts_reg,
+				    cpts_node, 0);
 	of_node_put(cpts_node);
 	if (IS_ENABLED(CONFIG_TI_CPTS) && IS_ERR(gbe_dev->cpts)) {
 		ret = PTR_ERR(gbe_dev->cpts);
diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
index b50c3ec3495b..6bcda20ed7e7 100644
--- a/drivers/net/ethernet/toshiba/tc35815.c
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -643,7 +643,7 @@ static int tc_mii_probe(struct net_device *dev)
 		linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, mask);
 		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, mask);
 	}
-	linkmode_and(phydev->supported, phydev->supported, mask);
+	linkmode_andnot(phydev->supported, phydev->supported, mask);
 	linkmode_copy(phydev->advertising, phydev->supported);
 
 	lp->link = 0;
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 8e05b5c31a77..fe409819b56d 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -30,7 +30,7 @@ config 6PACK
 
 	  Note that this driver is still experimental and might cause
 	  problems. For details about the features and the usage of the
-	  driver, read <file:Documentation/networking/6pack.txt>.
+	  driver, read <file:Documentation/networking/6pack.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called 6pack.
@@ -127,7 +127,7 @@ config BAYCOM_SER_FDX
 	  your serial interface chip. To configure the driver, use the sethdlc
 	  utility available in the standard ax25 utilities package. For
 	  information on the modems, see <http://www.baycom.de/> and
-	  <file:Documentation/networking/baycom.txt>.
+	  <file:Documentation/networking/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_ser_fdx.  This is recommended.
@@ -145,7 +145,7 @@ config BAYCOM_SER_HDX
 	  the driver, use the sethdlc utility available in the standard ax25
 	  utilities package. For information on the modems, see
 	  <http://www.baycom.de/> and
-	  <file:Documentation/networking/baycom.txt>.
+	  <file:Documentation/networking/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_ser_hdx.  This is recommended.
@@ -160,7 +160,7 @@ config BAYCOM_PAR
 	  par96 designs. To configure the driver, use the sethdlc utility
 	  available in the standard ax25 utilities package. For information on
 	  the modems, see <http://www.baycom.de/> and the file
-	  <file:Documentation/networking/baycom.txt>.
+	  <file:Documentation/networking/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_par.  This is recommended.
@@ -175,7 +175,7 @@ config BAYCOM_EPP
 	  designs. To configure the driver, use the sethdlc utility available
 	  in the standard ax25 utilities package. For information on the
 	  modems, see <http://www.baycom.de/> and the file
-	  <file:Documentation/networking/baycom.txt>.
+	  <file:Documentation/networking/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_epp.  This is recommended.
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index ca68aa1df801..41f5cf0bb997 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -636,9 +636,12 @@ void netvsc_device_remove(struct hv_device *device)
 
 	RCU_INIT_POINTER(net_device_ctx->nvdev, NULL);
 
-	/* And disassociate NAPI context from device */
-	for (i = 0; i < net_device->num_chn; i++)
+	/* Disable NAPI and disassociate its context from the device. */
+	for (i = 0; i < net_device->num_chn; i++) {
+		/* See also vmbus_reset_channel_cb(). */
+		napi_disable(&net_device->chan_table[i].napi);
 		netif_napi_del(&net_device->chan_table[i].napi);
+	}
 
 	/*
 	 * At this point, no one should be accessing net_device
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 0482adc9916b..d45600e0a38c 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -123,7 +123,8 @@ static struct macvlan_dev *macvlan_hash_lookup(const struct macvlan_port *port,
 	struct macvlan_dev *vlan;
 	u32 idx = macvlan_eth_hash(addr);
 
-	hlist_for_each_entry_rcu(vlan, &port->vlan_hash[idx], hlist) {
+	hlist_for_each_entry_rcu(vlan, &port->vlan_hash[idx], hlist,
+				 lockdep_rtnl_is_held()) {
 		if (ether_addr_equal_64bits(vlan->dev->dev_addr, addr))
 			return vlan;
 	}
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 3fa33d27eeba..bacfee41b564 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -346,6 +346,17 @@ config BROADCOM_PHY
 	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
 	  BCM5481, BCM54810 and BCM5482 PHYs.
 
+config BCM54140_PHY
+	tristate "Broadcom BCM54140 PHY"
+	depends on PHYLIB
+	depends on HWMON || HWMON=n
+	select BCM_NET_PHYLIB
+	help
+	  Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY.
+
+	  This driver also supports the hardware monitoring of this PHY and
+	  exposes voltage and temperature sensors.
+
 config BCM84881_PHY
 	tristate "Broadcom BCM84881 PHY"
 	depends on PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 2f5c7093a65b..cd345b75d127 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_BCM87XX_PHY)	+= bcm87xx.o
 obj-$(CONFIG_BCM_CYGNUS_PHY)	+= bcm-cygnus.o
 obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o
 obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+obj-$(CONFIG_BCM54140_PHY)	+= bcm54140.o
 obj-$(CONFIG_BCM84881_PHY)	+= bcm84881.o
 obj-$(CONFIG_CICADA_PHY)	+= cicada.o
 obj-$(CONFIG_CORTINA_PHY)	+= cortina.o
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 31f731e6df72..31b6edcc1fd1 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -106,6 +106,7 @@
 #define ATH9331_PHY_ID 0x004dd041
 #define ATH8030_PHY_ID 0x004dd076
 #define ATH8031_PHY_ID 0x004dd074
+#define ATH8032_PHY_ID 0x004dd023
 #define ATH8035_PHY_ID 0x004dd072
 #define AT803X_PHY_ID_MASK			0xffffffef
 
@@ -762,6 +763,21 @@ static struct phy_driver at803x_driver[] = {
 	.aneg_done		= at803x_aneg_done,
 	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
+}, {
+	/* Qualcomm Atheros AR8032 */
+	PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
+	.name			= "Qualcomm Atheros AR8032",
+	.probe			= at803x_probe,
+	.remove			= at803x_remove,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	/* PHY_BASIC_FEATURES */
+	.ack_interrupt		= at803x_ack_interrupt,
+	.config_intr		= at803x_config_intr,
 }, {
 	/* ATHEROS AR9331 */
 	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
@@ -778,6 +794,7 @@ module_phy_driver(at803x_driver);
 static struct mdio_device_id __maybe_unused atheros_tbl[] = {
 	{ ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
 	{ ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
+	{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
 	{ ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
 	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
 	{ }
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index e77b274a09fd..d5f9a2701989 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -155,6 +155,86 @@ int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
 }
 EXPORT_SYMBOL_GPL(bcm_phy_write_shadow);
 
+int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+	int val;
+
+	val = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+	if (val < 0)
+		return val;
+
+	return __phy_read(phydev, MII_BCM54XX_RDB_DATA);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_read_rdb);
+
+int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __bcm_phy_read_rdb(phydev, rdb);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_rdb);
+
+int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
+{
+	int ret;
+
+	ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+	if (ret < 0)
+		return ret;
+
+	return __phy_write(phydev, MII_BCM54XX_RDB_DATA, val);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_write_rdb);
+
+int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __bcm_phy_write_rdb(phydev, rdb, val);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_rdb);
+
+int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
+{
+	int new, ret;
+
+	ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+	if (ret < 0)
+		return ret;
+
+	ret = __phy_read(phydev, MII_BCM54XX_RDB_DATA);
+	if (ret < 0)
+		return ret;
+
+	new = (ret & ~mask) | set;
+	if (new == ret)
+		return 0;
+
+	return __phy_write(phydev, MII_BCM54XX_RDB_DATA, new);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_modify_rdb);
+
+int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
+{
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+	ret = __bcm_phy_modify_rdb(phydev, rdb, mask, set);
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_modify_rdb);
+
 int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down)
 {
 	int val;
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index 129df819be8c..4d3de91cda6c 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -48,6 +48,15 @@ int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
 			 u16 val);
 int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow);
 
+int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val);
+int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val);
+int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb);
+int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb);
+int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask,
+			 u16 set);
+int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask,
+		       u16 set);
+
 int bcm_phy_ack_intr(struct phy_device *phydev);
 int bcm_phy_config_intr(struct phy_device *phydev);
 
diff --git a/drivers/net/phy/bcm54140.c b/drivers/net/phy/bcm54140.c
new file mode 100644
index 000000000000..c009ac2856a5
--- /dev/null
+++ b/drivers/net/phy/bcm54140.c
@@ -0,0 +1,879 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Broadcom BCM54140 Quad SGMII/QSGMII Copper/Fiber Gigabit PHY
+ *
+ * Copyright (c) 2020 Michael Walle <michael@walle.cc>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/brcmphy.h>
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#include "bcm-phy-lib.h"
+
+/* RDB per-port registers
+ */
+#define BCM54140_RDB_ISR		0x00a	/* interrupt status */
+#define BCM54140_RDB_IMR		0x00b	/* interrupt mask */
+#define  BCM54140_RDB_INT_LINK		BIT(1)	/* link status changed */
+#define  BCM54140_RDB_INT_SPEED		BIT(2)	/* link speed change */
+#define  BCM54140_RDB_INT_DUPLEX	BIT(3)	/* duplex mode changed */
+#define BCM54140_RDB_SPARE1		0x012	/* spare control 1 */
+#define  BCM54140_RDB_SPARE1_LSLM	BIT(2)	/* link speed LED mode */
+#define BCM54140_RDB_SPARE2		0x014	/* spare control 2 */
+#define  BCM54140_RDB_SPARE2_WS_RTRY_DIS BIT(8) /* wirespeed retry disable */
+#define  BCM54140_RDB_SPARE2_WS_RTRY_LIMIT GENMASK(4, 2) /* retry limit */
+#define BCM54140_RDB_SPARE3		0x015	/* spare control 3 */
+#define  BCM54140_RDB_SPARE3_BIT0	BIT(0)
+#define BCM54140_RDB_LED_CTRL		0x019	/* LED control */
+#define  BCM54140_RDB_LED_CTRL_ACTLINK0	BIT(4)
+#define  BCM54140_RDB_LED_CTRL_ACTLINK1	BIT(8)
+#define BCM54140_RDB_C_APWR		0x01a	/* auto power down control */
+#define  BCM54140_RDB_C_APWR_SINGLE_PULSE	BIT(8)	/* single pulse */
+#define  BCM54140_RDB_C_APWR_APD_MODE_DIS	0 /* ADP disable */
+#define  BCM54140_RDB_C_APWR_APD_MODE_EN	1 /* ADP enable */
+#define  BCM54140_RDB_C_APWR_APD_MODE_DIS2	2 /* ADP disable */
+#define  BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG	3 /* ADP enable w/ aneg */
+#define  BCM54140_RDB_C_APWR_APD_MODE_MASK	GENMASK(6, 5)
+#define  BCM54140_RDB_C_APWR_SLP_TIM_MASK BIT(4)/* sleep timer */
+#define  BCM54140_RDB_C_APWR_SLP_TIM_2_7 0	/* 2.7s */
+#define  BCM54140_RDB_C_APWR_SLP_TIM_5_4 1	/* 5.4s */
+#define BCM54140_RDB_C_PWR		0x02a	/* copper power control */
+#define  BCM54140_RDB_C_PWR_ISOLATE	BIT(5)	/* super isolate mode */
+#define BCM54140_RDB_C_MISC_CTRL	0x02f	/* misc copper control */
+#define  BCM54140_RDB_C_MISC_CTRL_WS_EN BIT(4)	/* wirespeed enable */
+
+/* RDB global registers
+ */
+#define BCM54140_RDB_TOP_IMR		0x82d	/* interrupt mask */
+#define  BCM54140_RDB_TOP_IMR_PORT0	BIT(4)
+#define  BCM54140_RDB_TOP_IMR_PORT1	BIT(5)
+#define  BCM54140_RDB_TOP_IMR_PORT2	BIT(6)
+#define  BCM54140_RDB_TOP_IMR_PORT3	BIT(7)
+#define BCM54140_RDB_MON_CTRL		0x831	/* monitor control */
+#define  BCM54140_RDB_MON_CTRL_V_MODE	BIT(3)	/* voltage mode */
+#define  BCM54140_RDB_MON_CTRL_SEL_MASK	GENMASK(2, 1)
+#define  BCM54140_RDB_MON_CTRL_SEL_TEMP	0	/* meassure temperature */
+#define  BCM54140_RDB_MON_CTRL_SEL_1V0	1	/* meassure AVDDL 1.0V */
+#define  BCM54140_RDB_MON_CTRL_SEL_3V3	2	/* meassure AVDDH 3.3V */
+#define  BCM54140_RDB_MON_CTRL_SEL_RR	3	/* meassure all round-robin */
+#define  BCM54140_RDB_MON_CTRL_PWR_DOWN	BIT(0)	/* power-down monitor */
+#define BCM54140_RDB_MON_TEMP_VAL	0x832	/* temperature value */
+#define BCM54140_RDB_MON_TEMP_MAX	0x833	/* temperature high thresh */
+#define BCM54140_RDB_MON_TEMP_MIN	0x834	/* temperature low thresh */
+#define  BCM54140_RDB_MON_TEMP_DATA_MASK GENMASK(9, 0)
+#define BCM54140_RDB_MON_1V0_VAL	0x835	/* AVDDL 1.0V value */
+#define BCM54140_RDB_MON_1V0_MAX	0x836	/* AVDDL 1.0V high thresh */
+#define BCM54140_RDB_MON_1V0_MIN	0x837	/* AVDDL 1.0V low thresh */
+#define  BCM54140_RDB_MON_1V0_DATA_MASK	GENMASK(10, 0)
+#define BCM54140_RDB_MON_3V3_VAL	0x838	/* AVDDH 3.3V value */
+#define BCM54140_RDB_MON_3V3_MAX	0x839	/* AVDDH 3.3V high thresh */
+#define BCM54140_RDB_MON_3V3_MIN	0x83a	/* AVDDH 3.3V low thresh */
+#define  BCM54140_RDB_MON_3V3_DATA_MASK	GENMASK(11, 0)
+#define BCM54140_RDB_MON_ISR		0x83b	/* interrupt status */
+#define  BCM54140_RDB_MON_ISR_3V3	BIT(2)	/* AVDDH 3.3V alarm */
+#define  BCM54140_RDB_MON_ISR_1V0	BIT(1)	/* AVDDL 1.0V alarm */
+#define  BCM54140_RDB_MON_ISR_TEMP	BIT(0)	/* temperature alarm */
+
+/* According to the datasheet the formula is:
+ *   T = 413.35 - (0.49055 * bits[9:0])
+ */
+#define BCM54140_HWMON_TO_TEMP(v) (413350L - (v) * 491)
+#define BCM54140_HWMON_FROM_TEMP(v) DIV_ROUND_CLOSEST_ULL(413350L - (v), 491)
+
+/* According to the datasheet the formula is:
+ *   U = bits[11:0] / 1024 * 220 / 0.2
+ *
+ * Normalized:
+ *   U = bits[11:0] / 4096 * 2514
+ */
+#define BCM54140_HWMON_TO_IN_1V0(v) ((v) * 2514 >> 11)
+#define BCM54140_HWMON_FROM_IN_1V0(v) DIV_ROUND_CLOSEST_ULL(((v) << 11), 2514)
+
+/* According to the datasheet the formula is:
+ *   U = bits[10:0] / 1024 * 880 / 0.7
+ *
+ * Normalized:
+ *   U = bits[10:0] / 2048 * 4400
+ */
+#define BCM54140_HWMON_TO_IN_3V3(v) ((v) * 4400 >> 12)
+#define BCM54140_HWMON_FROM_IN_3V3(v) DIV_ROUND_CLOSEST_ULL(((v) << 12), 4400)
+
+#define BCM54140_HWMON_TO_IN(ch, v) ((ch) ? BCM54140_HWMON_TO_IN_3V3(v) \
+					  : BCM54140_HWMON_TO_IN_1V0(v))
+#define BCM54140_HWMON_FROM_IN(ch, v) ((ch) ? BCM54140_HWMON_FROM_IN_3V3(v) \
+					    : BCM54140_HWMON_FROM_IN_1V0(v))
+#define BCM54140_HWMON_IN_MASK(ch) ((ch) ? BCM54140_RDB_MON_3V3_DATA_MASK \
+					 : BCM54140_RDB_MON_1V0_DATA_MASK)
+#define BCM54140_HWMON_IN_VAL_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_VAL \
+					    : BCM54140_RDB_MON_1V0_VAL)
+#define BCM54140_HWMON_IN_MIN_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MIN \
+					    : BCM54140_RDB_MON_1V0_MIN)
+#define BCM54140_HWMON_IN_MAX_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MAX \
+					    : BCM54140_RDB_MON_1V0_MAX)
+#define BCM54140_HWMON_IN_ALARM_BIT(ch) ((ch) ? BCM54140_RDB_MON_ISR_3V3 \
+					      : BCM54140_RDB_MON_ISR_1V0)
+
+#define BCM54140_DEFAULT_DOWNSHIFT 5
+#define BCM54140_MAX_DOWNSHIFT 9
+
+struct bcm54140_priv {
+	int port;
+	int base_addr;
+#if IS_ENABLED(CONFIG_HWMON)
+	bool pkg_init;
+	/* protect the alarm bits */
+	struct mutex alarm_lock;
+	u16 alarm;
+#endif
+};
+
+#if IS_ENABLED(CONFIG_HWMON)
+static umode_t bcm54140_hwmon_is_visible(const void *data,
+					 enum hwmon_sensor_types type,
+					 u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_min:
+		case hwmon_in_max:
+			return 0644;
+		case hwmon_in_label:
+		case hwmon_in_input:
+		case hwmon_in_alarm:
+			return 0444;
+		default:
+			return 0;
+		}
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_min:
+		case hwmon_temp_max:
+			return 0644;
+		case hwmon_temp_input:
+		case hwmon_temp_alarm:
+			return 0444;
+		default:
+			return 0;
+		}
+	default:
+		return 0;
+	}
+}
+
+static int bcm54140_hwmon_read_alarm(struct device *dev, unsigned int bit,
+				     long *val)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+	struct bcm54140_priv *priv = phydev->priv;
+	int tmp, ret = 0;
+
+	mutex_lock(&priv->alarm_lock);
+
+	/* latch any alarm bits */
+	tmp = bcm_phy_read_rdb(phydev, BCM54140_RDB_MON_ISR);
+	if (tmp < 0) {
+		ret = tmp;
+		goto out;
+	}
+	priv->alarm |= tmp;
+
+	*val = !!(priv->alarm & bit);
+	priv->alarm &= ~bit;
+
+out:
+	mutex_unlock(&priv->alarm_lock);
+	return ret;
+}
+
+static int bcm54140_hwmon_read_temp(struct device *dev, u32 attr, long *val)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+	u16 reg;
+	int tmp;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		reg = BCM54140_RDB_MON_TEMP_VAL;
+		break;
+	case hwmon_temp_min:
+		reg = BCM54140_RDB_MON_TEMP_MIN;
+		break;
+	case hwmon_temp_max:
+		reg = BCM54140_RDB_MON_TEMP_MAX;
+		break;
+	case hwmon_temp_alarm:
+		return bcm54140_hwmon_read_alarm(dev,
+						 BCM54140_RDB_MON_ISR_TEMP,
+						 val);
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	tmp = bcm_phy_read_rdb(phydev, reg);
+	if (tmp < 0)
+		return tmp;
+
+	*val = BCM54140_HWMON_TO_TEMP(tmp & BCM54140_RDB_MON_TEMP_DATA_MASK);
+
+	return 0;
+}
+
+static int bcm54140_hwmon_read_in(struct device *dev, u32 attr,
+				  int channel, long *val)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+	u16 bit, reg;
+	int tmp;
+
+	switch (attr) {
+	case hwmon_in_input:
+		reg = BCM54140_HWMON_IN_VAL_REG(channel);
+		break;
+	case hwmon_in_min:
+		reg = BCM54140_HWMON_IN_MIN_REG(channel);
+		break;
+	case hwmon_in_max:
+		reg = BCM54140_HWMON_IN_MAX_REG(channel);
+		break;
+	case hwmon_in_alarm:
+		bit = BCM54140_HWMON_IN_ALARM_BIT(channel);
+		return bcm54140_hwmon_read_alarm(dev, bit, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	tmp = bcm_phy_read_rdb(phydev, reg);
+	if (tmp < 0)
+		return tmp;
+
+	tmp &= BCM54140_HWMON_IN_MASK(channel);
+	*val = BCM54140_HWMON_TO_IN(channel, tmp);
+
+	return 0;
+}
+
+static int bcm54140_hwmon_read(struct device *dev,
+			       enum hwmon_sensor_types type, u32 attr,
+			       int channel, long *val)
+{
+	switch (type) {
+	case hwmon_temp:
+		return bcm54140_hwmon_read_temp(dev, attr, val);
+	case hwmon_in:
+		return bcm54140_hwmon_read_in(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const char *const bcm54140_hwmon_in_labels[] = {
+	"AVDDL",
+	"AVDDH",
+};
+
+static int bcm54140_hwmon_read_string(struct device *dev,
+				      enum hwmon_sensor_types type, u32 attr,
+				      int channel, const char **str)
+{
+	switch (type) {
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_label:
+			*str = bcm54140_hwmon_in_labels[channel];
+			return 0;
+		default:
+			return -EOPNOTSUPP;
+		}
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int bcm54140_hwmon_write_temp(struct device *dev, u32 attr,
+				     int channel, long val)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+	u16 mask = BCM54140_RDB_MON_TEMP_DATA_MASK;
+	u16 reg;
+
+	val = clamp_val(val, BCM54140_HWMON_TO_TEMP(mask),
+			BCM54140_HWMON_TO_TEMP(0));
+
+	switch (attr) {
+	case hwmon_temp_min:
+		reg = BCM54140_RDB_MON_TEMP_MIN;
+		break;
+	case hwmon_temp_max:
+		reg = BCM54140_RDB_MON_TEMP_MAX;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return bcm_phy_modify_rdb(phydev, reg, mask,
+				  BCM54140_HWMON_FROM_TEMP(val));
+}
+
+static int bcm54140_hwmon_write_in(struct device *dev, u32 attr,
+				   int channel, long val)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+	u16 mask = BCM54140_HWMON_IN_MASK(channel);
+	u16 reg;
+
+	val = clamp_val(val, 0, BCM54140_HWMON_TO_IN(channel, mask));
+
+	switch (attr) {
+	case hwmon_in_min:
+		reg = BCM54140_HWMON_IN_MIN_REG(channel);
+		break;
+	case hwmon_in_max:
+		reg = BCM54140_HWMON_IN_MAX_REG(channel);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return bcm_phy_modify_rdb(phydev, reg, mask,
+				  BCM54140_HWMON_FROM_IN(channel, val));
+}
+
+static int bcm54140_hwmon_write(struct device *dev,
+				enum hwmon_sensor_types type, u32 attr,
+				int channel, long val)
+{
+	switch (type) {
+	case hwmon_temp:
+		return bcm54140_hwmon_write_temp(dev, attr, channel, val);
+	case hwmon_in:
+		return bcm54140_hwmon_write_in(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_channel_info *bcm54140_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+			   HWMON_T_ALARM),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM | HWMON_I_LABEL),
+	NULL
+};
+
+static const struct hwmon_ops bcm54140_hwmon_ops = {
+	.is_visible = bcm54140_hwmon_is_visible,
+	.read = bcm54140_hwmon_read,
+	.read_string = bcm54140_hwmon_read_string,
+	.write = bcm54140_hwmon_write,
+};
+
+static const struct hwmon_chip_info bcm54140_chip_info = {
+	.ops = &bcm54140_hwmon_ops,
+	.info = bcm54140_hwmon_info,
+};
+
+static int bcm54140_enable_monitoring(struct phy_device *phydev)
+{
+	u16 mask, set;
+
+	/* 3.3V voltage mode */
+	set = BCM54140_RDB_MON_CTRL_V_MODE;
+
+	/* select round-robin */
+	mask = BCM54140_RDB_MON_CTRL_SEL_MASK;
+	set |= FIELD_PREP(BCM54140_RDB_MON_CTRL_SEL_MASK,
+			  BCM54140_RDB_MON_CTRL_SEL_RR);
+
+	/* remove power-down bit */
+	mask |= BCM54140_RDB_MON_CTRL_PWR_DOWN;
+
+	return bcm_phy_modify_rdb(phydev, BCM54140_RDB_MON_CTRL, mask, set);
+}
+
+/* Check if one PHY has already done the init of the parts common to all PHYs
+ * in the Quad PHY package.
+ */
+static bool bcm54140_is_pkg_init(struct phy_device *phydev)
+{
+	struct bcm54140_priv *priv = phydev->priv;
+	struct mii_bus *bus = phydev->mdio.bus;
+	int base_addr = priv->base_addr;
+	struct phy_device *phy;
+	int i;
+
+	/* Quad PHY */
+	for (i = 0; i < 4; i++) {
+		phy = mdiobus_get_phy(bus, base_addr + i);
+		if (!phy)
+			continue;
+
+		if ((phy->phy_id & phydev->drv->phy_id_mask) !=
+		    (phydev->drv->phy_id & phydev->drv->phy_id_mask))
+			continue;
+
+		priv = phy->priv;
+
+		if (priv && priv->pkg_init)
+			return true;
+	}
+
+	return false;
+}
+
+static int bcm54140_probe_once(struct phy_device *phydev)
+{
+	struct device *hwmon;
+	int ret;
+
+	/* enable hardware monitoring */
+	ret = bcm54140_enable_monitoring(phydev);
+	if (ret)
+		return ret;
+
+	hwmon = devm_hwmon_device_register_with_info(&phydev->mdio.dev,
+						     "BCM54140", phydev,
+						     &bcm54140_chip_info,
+						     NULL);
+	return PTR_ERR_OR_ZERO(hwmon);
+}
+#endif
+
+static int bcm54140_base_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+	struct bcm54140_priv *priv = phydev->priv;
+	struct mii_bus *bus = phydev->mdio.bus;
+	int ret;
+
+	mutex_lock(&bus->mdio_lock);
+	ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb);
+	if (ret < 0)
+		goto out;
+
+	ret = __mdiobus_read(bus, priv->base_addr, MII_BCM54XX_RDB_DATA);
+
+out:
+	mutex_unlock(&bus->mdio_lock);
+	return ret;
+}
+
+static int bcm54140_base_write_rdb(struct phy_device *phydev,
+				   u16 rdb, u16 val)
+{
+	struct bcm54140_priv *priv = phydev->priv;
+	struct mii_bus *bus = phydev->mdio.bus;
+	int ret;
+
+	mutex_lock(&bus->mdio_lock);
+	ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb);
+	if (ret < 0)
+		goto out;
+
+	ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_DATA, val);
+
+out:
+	mutex_unlock(&bus->mdio_lock);
+	return ret;
+}
+
+/* Under some circumstances a core PLL may not lock, this will then prevent
+ * a successful link establishment. Restart the PLL after the voltages are
+ * stable to workaround this issue.
+ */
+static int bcm54140_b0_workaround(struct phy_device *phydev)
+{
+	int spare3;
+	int ret;
+
+	spare3 = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE3);
+	if (spare3 < 0)
+		return spare3;
+
+	spare3 &= ~BCM54140_RDB_SPARE3_BIT0;
+
+	ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3);
+	if (ret)
+		return ret;
+
+	ret = phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN);
+	if (ret)
+		return ret;
+
+	ret = phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0);
+	if (ret)
+		return ret;
+
+	spare3 |= BCM54140_RDB_SPARE3_BIT0;
+
+	return bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3);
+}
+
+/* The BCM54140 is a quad PHY where only the first port has access to the
+ * global register. Thus we need to find out its PHY address.
+ *
+ */
+static int bcm54140_get_base_addr_and_port(struct phy_device *phydev)
+{
+	struct bcm54140_priv *priv = phydev->priv;
+	struct mii_bus *bus = phydev->mdio.bus;
+	int addr, min_addr, max_addr;
+	int step = 1;
+	u32 phy_id;
+	int tmp;
+
+	min_addr = phydev->mdio.addr;
+	max_addr = phydev->mdio.addr;
+	addr = phydev->mdio.addr;
+
+	/* We scan forward and backwards and look for PHYs which have the
+	 * same phy_id like we do. Step 1 will scan forward, step 2
+	 * backwards. Once we are finished, we have a min_addr and
+	 * max_addr which resembles the range of PHY addresses of the same
+	 * type of PHY. There is one caveat; there may be many PHYs of
+	 * the same type, but we know that each PHY takes exactly 4
+	 * consecutive addresses. Therefore we can deduce our offset
+	 * to the base address of this quad PHY.
+	 */
+
+	while (1) {
+		if (step == 3) {
+			break;
+		} else if (step == 1) {
+			max_addr = addr;
+			addr++;
+		} else {
+			min_addr = addr;
+			addr--;
+		}
+
+		if (addr < 0 || addr >= PHY_MAX_ADDR) {
+			addr = phydev->mdio.addr;
+			step++;
+			continue;
+		}
+
+		/* read the PHY id */
+		tmp = mdiobus_read(bus, addr, MII_PHYSID1);
+		if (tmp < 0)
+			return tmp;
+		phy_id = tmp << 16;
+		tmp = mdiobus_read(bus, addr, MII_PHYSID2);
+		if (tmp < 0)
+			return tmp;
+		phy_id |= tmp;
+
+		/* see if it is still the same PHY */
+		if ((phy_id & phydev->drv->phy_id_mask) !=
+		    (phydev->drv->phy_id & phydev->drv->phy_id_mask)) {
+			addr = phydev->mdio.addr;
+			step++;
+		}
+	}
+
+	/* The range we get should be a multiple of four. Please note that both
+	 * the min_addr and max_addr are inclusive. So we have to add one if we
+	 * subtract them.
+	 */
+	if ((max_addr - min_addr + 1) % 4) {
+		dev_err(&phydev->mdio.dev,
+			"Detected Quad PHY IDs %d..%d doesn't make sense.\n",
+			min_addr, max_addr);
+		return -EINVAL;
+	}
+
+	priv->port = (phydev->mdio.addr - min_addr) % 4;
+	priv->base_addr = phydev->mdio.addr - priv->port;
+
+	return 0;
+}
+
+static int bcm54140_probe(struct phy_device *phydev)
+{
+	struct bcm54140_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	ret = bcm54140_get_base_addr_and_port(phydev);
+	if (ret)
+		return ret;
+
+#if IS_ENABLED(CONFIG_HWMON)
+	mutex_init(&priv->alarm_lock);
+
+	if (!bcm54140_is_pkg_init(phydev)) {
+		ret = bcm54140_probe_once(phydev);
+		if (ret)
+			return ret;
+	}
+
+	priv->pkg_init = true;
+#endif
+
+	phydev_dbg(phydev, "probed (port %d, base PHY address %d)\n",
+		   priv->port, priv->base_addr);
+
+	return 0;
+}
+
+static int bcm54140_config_init(struct phy_device *phydev)
+{
+	u16 reg = 0xffff;
+	int ret;
+
+	/* Apply hardware errata */
+	ret = bcm54140_b0_workaround(phydev);
+	if (ret)
+		return ret;
+
+	/* Unmask events we are interested in. */
+	reg &= ~(BCM54140_RDB_INT_DUPLEX |
+		 BCM54140_RDB_INT_SPEED |
+		 BCM54140_RDB_INT_LINK);
+	ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_IMR, reg);
+	if (ret)
+		return ret;
+
+	/* LED1=LINKSPD[1], LED2=LINKSPD[2], LED3=LINK/ACTIVITY */
+	ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE1,
+				 0, BCM54140_RDB_SPARE1_LSLM);
+	if (ret)
+		return ret;
+
+	ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_LED_CTRL,
+				 0, BCM54140_RDB_LED_CTRL_ACTLINK0);
+	if (ret)
+		return ret;
+
+	/* disable super isolate mode */
+	return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_PWR,
+				  BCM54140_RDB_C_PWR_ISOLATE, 0);
+}
+
+static int bcm54140_did_interrupt(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR);
+
+	return (ret < 0) ? 0 : ret;
+}
+
+static int bcm54140_ack_intr(struct phy_device *phydev)
+{
+	int reg;
+
+	/* clear pending interrupts */
+	reg = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR);
+	if (reg < 0)
+		return reg;
+
+	return 0;
+}
+
+static int bcm54140_config_intr(struct phy_device *phydev)
+{
+	struct bcm54140_priv *priv = phydev->priv;
+	static const u16 port_to_imr_bit[] = {
+		BCM54140_RDB_TOP_IMR_PORT0, BCM54140_RDB_TOP_IMR_PORT1,
+		BCM54140_RDB_TOP_IMR_PORT2, BCM54140_RDB_TOP_IMR_PORT3,
+	};
+	int reg;
+
+	if (priv->port >= ARRAY_SIZE(port_to_imr_bit))
+		return -EINVAL;
+
+	reg = bcm54140_base_read_rdb(phydev, BCM54140_RDB_TOP_IMR);
+	if (reg < 0)
+		return reg;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		reg &= ~port_to_imr_bit[priv->port];
+	else
+		reg |= port_to_imr_bit[priv->port];
+
+	return bcm54140_base_write_rdb(phydev, BCM54140_RDB_TOP_IMR, reg);
+}
+
+static int bcm54140_get_downshift(struct phy_device *phydev, u8 *data)
+{
+	int val;
+
+	val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_MISC_CTRL);
+	if (val < 0)
+		return val;
+
+	if (!(val & BCM54140_RDB_C_MISC_CTRL_WS_EN)) {
+		*data = DOWNSHIFT_DEV_DISABLE;
+		return 0;
+	}
+
+	val = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE2);
+	if (val < 0)
+		return val;
+
+	if (val & BCM54140_RDB_SPARE2_WS_RTRY_DIS)
+		*data = 1;
+	else
+		*data = FIELD_GET(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, val) + 2;
+
+	return 0;
+}
+
+static int bcm54140_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+	u16 mask, set;
+	int ret;
+
+	if (cnt > BCM54140_MAX_DOWNSHIFT && cnt != DOWNSHIFT_DEV_DEFAULT_COUNT)
+		return -EINVAL;
+
+	if (!cnt)
+		return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL,
+					  BCM54140_RDB_C_MISC_CTRL_WS_EN, 0);
+
+	if (cnt == DOWNSHIFT_DEV_DEFAULT_COUNT)
+		cnt = BCM54140_DEFAULT_DOWNSHIFT;
+
+	if (cnt == 1) {
+		mask = 0;
+		set = BCM54140_RDB_SPARE2_WS_RTRY_DIS;
+	} else {
+		mask = BCM54140_RDB_SPARE2_WS_RTRY_DIS;
+		mask |= BCM54140_RDB_SPARE2_WS_RTRY_LIMIT;
+		set = FIELD_PREP(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, cnt - 2);
+	}
+	ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE2,
+				 mask, set);
+	if (ret)
+		return ret;
+
+	return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL,
+				  0, BCM54140_RDB_C_MISC_CTRL_WS_EN);
+}
+
+static int bcm54140_get_edpd(struct phy_device *phydev, u16 *tx_interval)
+{
+	int val;
+
+	val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_APWR);
+	if (val < 0)
+		return val;
+
+	switch (FIELD_GET(BCM54140_RDB_C_APWR_APD_MODE_MASK, val)) {
+	case BCM54140_RDB_C_APWR_APD_MODE_DIS:
+	case BCM54140_RDB_C_APWR_APD_MODE_DIS2:
+		*tx_interval = ETHTOOL_PHY_EDPD_DISABLE;
+		break;
+	case BCM54140_RDB_C_APWR_APD_MODE_EN:
+	case BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG:
+		switch (FIELD_GET(BCM54140_RDB_C_APWR_SLP_TIM_MASK, val)) {
+		case BCM54140_RDB_C_APWR_SLP_TIM_2_7:
+			*tx_interval = 2700;
+			break;
+		case BCM54140_RDB_C_APWR_SLP_TIM_5_4:
+			*tx_interval = 5400;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int bcm54140_set_edpd(struct phy_device *phydev, u16 tx_interval)
+{
+	u16 mask, set;
+
+	mask = BCM54140_RDB_C_APWR_APD_MODE_MASK;
+	if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE)
+		set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK,
+				 BCM54140_RDB_C_APWR_APD_MODE_DIS);
+	else
+		set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK,
+				 BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG);
+
+	/* enable single pulse mode */
+	set |= BCM54140_RDB_C_APWR_SINGLE_PULSE;
+
+	/* set sleep timer */
+	mask |= BCM54140_RDB_C_APWR_SLP_TIM_MASK;
+	switch (tx_interval) {
+	case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
+	case ETHTOOL_PHY_EDPD_DISABLE:
+	case 2700:
+		set |= BCM54140_RDB_C_APWR_SLP_TIM_2_7;
+		break;
+	case 5400:
+		set |= BCM54140_RDB_C_APWR_SLP_TIM_5_4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_APWR, mask, set);
+}
+
+static int bcm54140_get_tunable(struct phy_device *phydev,
+				struct ethtool_tunable *tuna, void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return bcm54140_get_downshift(phydev, data);
+	case ETHTOOL_PHY_EDPD:
+		return bcm54140_get_edpd(phydev, data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int bcm54140_set_tunable(struct phy_device *phydev,
+				struct ethtool_tunable *tuna, const void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return bcm54140_set_downshift(phydev, *(const u8 *)data);
+	case ETHTOOL_PHY_EDPD:
+		return bcm54140_set_edpd(phydev, *(const u16 *)data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static struct phy_driver bcm54140_drivers[] = {
+	{
+		.phy_id         = PHY_ID_BCM54140,
+		.phy_id_mask    = 0xfffffff0,
+		.name           = "Broadcom BCM54140",
+		.features       = PHY_GBIT_FEATURES,
+		.config_init    = bcm54140_config_init,
+		.did_interrupt	= bcm54140_did_interrupt,
+		.ack_interrupt  = bcm54140_ack_intr,
+		.config_intr    = bcm54140_config_intr,
+		.probe		= bcm54140_probe,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.get_tunable	= bcm54140_get_tunable,
+		.set_tunable	= bcm54140_set_tunable,
+	},
+};
+module_phy_driver(bcm54140_drivers);
+
+static struct mdio_device_id __maybe_unused bcm54140_tbl[] = {
+	{ PHY_ID_BCM54140, 0xfffffff0 },
+	{ }
+};
+
+MODULE_AUTHOR("Michael Walle");
+MODULE_DESCRIPTION("Broadcom BCM54140 PHY driver");
+MODULE_DEVICE_TABLE(mdio, bcm54140_tbl);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index ae4873f2f86e..97201d5cf007 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -781,6 +781,19 @@ static struct phy_driver broadcom_drivers[] = {
 	.get_strings	= bcm_phy_get_strings,
 	.get_stats	= bcm53xx_phy_get_stats,
 	.probe		= bcm53xx_phy_probe,
+}, {
+	.phy_id		= PHY_ID_BCM53125,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM53125",
+	.flags		= PHY_IS_INTERNAL,
+	/* PHY_GBIT_FEATURES */
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm53xx_phy_get_stats,
+	.probe		= bcm53xx_phy_probe,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 }, {
 	.phy_id         = PHY_ID_BCM89610,
 	.phy_id_mask    = 0xfffffff0,
@@ -810,6 +823,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
 	{ PHY_ID_BCMAC131, 0xfffffff0 },
 	{ PHY_ID_BCM5241, 0xfffffff0 },
 	{ PHY_ID_BCM5395, 0xfffffff0 },
+	{ PHY_ID_BCM53125, 0xfffffff0 },
 	{ PHY_ID_BCM89610, 0xfffffff0 },
 	{ }
 };
diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c
index 856cdc36aacd..aac51362c0fe 100644
--- a/drivers/net/phy/cortina.c
+++ b/drivers/net/phy/cortina.c
@@ -82,7 +82,6 @@ static struct phy_driver cortina_driver[] = {
 	.features       = PHY_10GBIT_FEATURES,
 	.config_aneg	= gen10g_config_aneg,
 	.read_status	= cortina_read_status,
-	.soft_reset	= genphy_no_soft_reset,
 	.probe		= cortina_probe,
 },
 };
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index b55e3c0403ed..4017ae1692d8 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -365,7 +365,7 @@ static int dp83867_get_downshift(struct phy_device *phydev, u8 *data)
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	*data = enable ? count : DOWNSHIFT_DEV_DISABLE;
 
@@ -400,7 +400,7 @@ static int dp83867_set_downshift(struct phy_device *phydev, u8 cnt)
 			phydev_err(phydev,
 				   "Downshift count must be 1, 2, 4 or 8\n");
 			return -EINVAL;
-	};
+	}
 
 	val = DP83867_DOWNSHIFT_EN;
 	val |= FIELD_PREP(DP83867_DOWNSHIFT_ATTEMPT_MASK, count);
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index ff12492771ab..d4c2e62b2439 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -66,6 +66,9 @@ enum {
 	MV_PCS_CSSR1_SPD2_2500	= 0x0004,
 	MV_PCS_CSSR1_SPD2_10000	= 0x0000,
 
+	/* Temperature read register (88E2110 only) */
+	MV_PCS_TEMP		= 0x8042,
+
 	/* These registers appear at 0x800X and 0xa00X - the 0xa00X control
 	 * registers appear to set themselves to the 0x800X when AN is
 	 * restarted, but status registers appear readable from either.
@@ -77,6 +80,7 @@ enum {
 	MV_V2_PORT_CTRL		= 0xf001,
 	MV_V2_PORT_CTRL_SWRST	= BIT(15),
 	MV_V2_PORT_CTRL_PWRDOWN = BIT(11),
+	/* Temperature control/read registers (88X3310 only) */
 	MV_V2_TEMP_CTRL		= 0xf08a,
 	MV_V2_TEMP_CTRL_MASK	= 0xc000,
 	MV_V2_TEMP_CTRL_SAMPLE	= 0x0000,
@@ -104,6 +108,24 @@ static umode_t mv3310_hwmon_is_visible(const void *data,
 	return 0;
 }
 
+static int mv3310_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+	return phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
+}
+
+static int mv2110_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+	return phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_TEMP);
+}
+
+static int mv10g_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+	if (phydev->drv->phy_id == MARVELL_PHY_ID_88X3310)
+		return mv3310_hwmon_read_temp_reg(phydev);
+	else /* MARVELL_PHY_ID_88E2110 */
+		return mv2110_hwmon_read_temp_reg(phydev);
+}
+
 static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 			     u32 attr, int channel, long *value)
 {
@@ -116,7 +138,7 @@ static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 	}
 
 	if (type == hwmon_temp && attr == hwmon_temp_input) {
-		temp = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
+		temp = mv10g_hwmon_read_temp_reg(phydev);
 		if (temp < 0)
 			return temp;
 
@@ -169,6 +191,9 @@ static int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
 	u16 val;
 	int ret;
 
+	if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310)
+		return 0;
+
 	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP,
 			    MV_V2_TEMP_UNKNOWN);
 	if (ret < 0)
@@ -728,7 +753,6 @@ static struct phy_driver mv3310_drivers[] = {
 		.phy_id_mask	= MARVELL_PHY_ID_MASK,
 		.name		= "mv88x3310",
 		.get_features	= mv3310_get_features,
-		.soft_reset	= genphy_no_soft_reset,
 		.config_init	= mv3310_config_init,
 		.probe		= mv3310_probe,
 		.suspend	= mv3310_suspend,
@@ -746,7 +770,6 @@ static struct phy_driver mv3310_drivers[] = {
 		.probe		= mv3310_probe,
 		.suspend	= mv3310_suspend,
 		.resume		= mv3310_resume,
-		.soft_reset	= genphy_no_soft_reset,
 		.config_init	= mv3310_config_init,
 		.config_aneg	= mv3310_config_aneg,
 		.aneg_done	= mv3310_aneg_done,
diff --git a/drivers/net/phy/mdio-bcm-iproc.c b/drivers/net/phy/mdio-bcm-iproc.c
index f1ded03f0229..38bf40e0d673 100644
--- a/drivers/net/phy/mdio-bcm-iproc.c
+++ b/drivers/net/phy/mdio-bcm-iproc.c
@@ -159,7 +159,7 @@ static int iproc_mdio_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
-	dev_info(&pdev->dev, "Broadcom iProc MDIO bus at 0x%p\n", priv->base);
+	dev_info(&pdev->dev, "Broadcom iProc MDIO bus registered\n");
 
 	return 0;
 
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 7a4eb3f2cb74..3e79b96fa344 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -42,14 +42,11 @@
 
 static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
 {
-	int error;
-
 	/* Deassert the optional reset signal */
 	mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
 						 "reset", GPIOD_OUT_LOW);
-	error = PTR_ERR_OR_ZERO(mdiodev->reset_gpio);
-	if (error)
-		return error;
+	if (IS_ERR(mdiodev->reset_gpio))
+		return PTR_ERR(mdiodev->reset_gpio);
 
 	if (mdiodev->reset_gpio)
 		gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");
@@ -170,7 +167,12 @@ EXPORT_SYMBOL(mdiobus_alloc_size);
 
 static void _devm_mdiobus_free(struct device *dev, void *res)
 {
-	mdiobus_free(*(struct mii_bus **)res);
+	struct mii_bus *bus = *(struct mii_bus **)res;
+
+	if (bus->is_managed_registered && bus->state == MDIOBUS_REGISTERED)
+		mdiobus_unregister(bus);
+
+	mdiobus_free(bus);
 }
 
 static int devm_mdiobus_match(struct device *dev, void *res, void *data)
@@ -210,6 +212,7 @@ struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv)
 	if (bus) {
 		*ptr = bus;
 		devres_add(dev, ptr);
+		bus->is_managed = 1;
 	} else {
 		devres_free(ptr);
 	}
@@ -627,8 +630,11 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 		gpiod_set_value_cansleep(gpiod, 0);
 	}
 
-	if (bus->reset)
-		bus->reset(bus);
+	if (bus->reset) {
+		err = bus->reset(bus);
+		if (err)
+			goto error_reset_gpiod;
+	}
 
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
 		if ((bus->phy_mask & (1 << i)) == 0) {
@@ -657,7 +663,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 		mdiodev->device_remove(mdiodev);
 		mdiodev->device_free(mdiodev);
 	}
-
+error_reset_gpiod:
 	/* Put PHYs in RESET to save power */
 	if (bus->reset_gpiod)
 		gpiod_set_value_cansleep(bus->reset_gpiod, 1);
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 3a4d83fa52dc..3fe552675dd2 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -19,6 +19,7 @@
  *			 ksz9477
  */
 
+#include <linux/bitfield.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/phy.h>
@@ -490,9 +491,50 @@ static int ksz9021_config_init(struct phy_device *phydev)
 
 /* MMD Address 0x2 */
 #define MII_KSZ9031RN_CONTROL_PAD_SKEW	4
+#define MII_KSZ9031RN_RX_CTL_M		GENMASK(7, 4)
+#define MII_KSZ9031RN_TX_CTL_M		GENMASK(3, 0)
+
 #define MII_KSZ9031RN_RX_DATA_PAD_SKEW	5
+#define MII_KSZ9031RN_RXD3		GENMASK(15, 12)
+#define MII_KSZ9031RN_RXD2		GENMASK(11, 8)
+#define MII_KSZ9031RN_RXD1		GENMASK(7, 4)
+#define MII_KSZ9031RN_RXD0		GENMASK(3, 0)
+
 #define MII_KSZ9031RN_TX_DATA_PAD_SKEW	6
+#define MII_KSZ9031RN_TXD3		GENMASK(15, 12)
+#define MII_KSZ9031RN_TXD2		GENMASK(11, 8)
+#define MII_KSZ9031RN_TXD1		GENMASK(7, 4)
+#define MII_KSZ9031RN_TXD0		GENMASK(3, 0)
+
 #define MII_KSZ9031RN_CLK_PAD_SKEW	8
+#define MII_KSZ9031RN_GTX_CLK		GENMASK(9, 5)
+#define MII_KSZ9031RN_RX_CLK		GENMASK(4, 0)
+
+/* KSZ9031 has internal RGMII_IDRX = 1.2ns and RGMII_IDTX = 0ns. To
+ * provide different RGMII options we need to configure delay offset
+ * for each pad relative to build in delay.
+ */
+/* keep rx as "No delay adjustment" and set rx_clk to +0.60ns to get delays of
+ * 1.80ns
+ */
+#define RX_ID				0x7
+#define RX_CLK_ID			0x19
+
+/* set rx to +0.30ns and rx_clk to -0.90ns to compensate the
+ * internal 1.2ns delay.
+ */
+#define RX_ND				0xc
+#define RX_CLK_ND			0x0
+
+/* set tx to -0.42ns and tx_clk to +0.96ns to get 1.38ns delay */
+#define TX_ID				0x0
+#define TX_CLK_ID			0x1f
+
+/* set tx and tx_clk to "No delay adjustment" to keep 0ns
+ * dealy
+ */
+#define TX_ND				0x7
+#define TX_CLK_ND			0xf
 
 /* MMD Address 0x1C */
 #define MII_KSZ9031RN_EDPD		0x23
@@ -501,7 +543,8 @@ static int ksz9021_config_init(struct phy_device *phydev)
 static int ksz9031_of_load_skew_values(struct phy_device *phydev,
 				       const struct device_node *of_node,
 				       u16 reg, size_t field_sz,
-				       const char *field[], u8 numfields)
+				       const char *field[], u8 numfields,
+				       bool *update)
 {
 	int val[4] = {-1, -2, -3, -4};
 	int matches = 0;
@@ -517,6 +560,8 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev,
 	if (!matches)
 		return 0;
 
+	*update |= true;
+
 	if (matches < numfields)
 		newval = phy_read_mmd(phydev, 2, reg);
 	else
@@ -565,6 +610,67 @@ static int ksz9031_enable_edpd(struct phy_device *phydev)
 			     reg | MII_KSZ9031RN_EDPD_ENABLE);
 }
 
+static int ksz9031_config_rgmii_delay(struct phy_device *phydev)
+{
+	u16 rx, tx, rx_clk, tx_clk;
+	int ret;
+
+	switch (phydev->interface) {
+	case PHY_INTERFACE_MODE_RGMII:
+		tx = TX_ND;
+		tx_clk = TX_CLK_ND;
+		rx = RX_ND;
+		rx_clk = RX_CLK_ND;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		tx = TX_ID;
+		tx_clk = TX_CLK_ID;
+		rx = RX_ID;
+		rx_clk = RX_CLK_ID;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		tx = TX_ND;
+		tx_clk = TX_CLK_ND;
+		rx = RX_ID;
+		rx_clk = RX_CLK_ID;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		tx = TX_ID;
+		tx_clk = TX_CLK_ID;
+		rx = RX_ND;
+		rx_clk = RX_CLK_ND;
+		break;
+	default:
+		return 0;
+	}
+
+	ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_CONTROL_PAD_SKEW,
+			    FIELD_PREP(MII_KSZ9031RN_RX_CTL_M, rx) |
+			    FIELD_PREP(MII_KSZ9031RN_TX_CTL_M, tx));
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_RX_DATA_PAD_SKEW,
+			    FIELD_PREP(MII_KSZ9031RN_RXD3, rx) |
+			    FIELD_PREP(MII_KSZ9031RN_RXD2, rx) |
+			    FIELD_PREP(MII_KSZ9031RN_RXD1, rx) |
+			    FIELD_PREP(MII_KSZ9031RN_RXD0, rx));
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_TX_DATA_PAD_SKEW,
+			    FIELD_PREP(MII_KSZ9031RN_TXD3, tx) |
+			    FIELD_PREP(MII_KSZ9031RN_TXD2, tx) |
+			    FIELD_PREP(MII_KSZ9031RN_TXD1, tx) |
+			    FIELD_PREP(MII_KSZ9031RN_TXD0, tx));
+	if (ret < 0)
+		return ret;
+
+	return phy_write_mmd(phydev, 2, MII_KSZ9031RN_CLK_PAD_SKEW,
+			     FIELD_PREP(MII_KSZ9031RN_GTX_CLK, tx_clk) |
+			     FIELD_PREP(MII_KSZ9031RN_RX_CLK, rx_clk));
+}
+
 static int ksz9031_config_init(struct phy_device *phydev)
 {
 	const struct device *dev = &phydev->mdio.dev;
@@ -597,21 +703,33 @@ static int ksz9031_config_init(struct phy_device *phydev)
 	} while (!of_node && dev_walker);
 
 	if (of_node) {
+		bool update = false;
+
+		if (phy_interface_is_rgmii(phydev)) {
+			result = ksz9031_config_rgmii_delay(phydev);
+			if (result < 0)
+				return result;
+		}
+
 		ksz9031_of_load_skew_values(phydev, of_node,
 				MII_KSZ9031RN_CLK_PAD_SKEW, 5,
-				clk_skews, 2);
+				clk_skews, 2, &update);
 
 		ksz9031_of_load_skew_values(phydev, of_node,
 				MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
-				control_skews, 2);
+				control_skews, 2, &update);
 
 		ksz9031_of_load_skew_values(phydev, of_node,
 				MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
-				rx_data_skews, 4);
+				rx_data_skews, 4, &update);
 
 		ksz9031_of_load_skew_values(phydev, of_node,
 				MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
-				tx_data_skews, 4);
+				tx_data_skews, 4, &update);
+
+		if (update && phydev->interface != PHY_INTERFACE_MODE_RGMII)
+			phydev_warn(phydev,
+				    "*-skew-ps values should be used only with phy-mode = \"rgmii\"\n");
 
 		/* Silicon Errata Sheet (DS80000691D or DS80000692D):
 		 * When the device links in the 1000BASE-T slave mode only,
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index acddef79f4e8..5391acdece05 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1292,7 +1292,7 @@ static int vsc8584_config_pre_init(struct phy_device *phydev)
  */
 static bool vsc8584_is_pkg_init(struct phy_device *phydev, bool reversed)
 {
-	struct mdio_device **map = phydev->mdio.bus->mdio_map;
+	struct mii_bus *bus = phydev->mdio.bus;
 	struct vsc8531_private *vsc8531;
 	struct phy_device *phy;
 	int i, addr;
@@ -1306,11 +1306,10 @@ static bool vsc8584_is_pkg_init(struct phy_device *phydev, bool reversed)
 		else
 			addr = vsc8531->base_addr + i;
 
-		if (!map[addr])
+		phy = mdiobus_get_phy(bus, addr);
+		if (!phy)
 			continue;
 
-		phy = container_of(map[addr], struct phy_device, mdio);
-
 		if ((phy->phy_id & phydev->drv->phy_id_mask) !=
 		    (phydev->drv->phy_id & phydev->drv->phy_id_mask))
 			continue;
diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index 47caae770ffc..cc766b2d4136 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -6,15 +6,19 @@
 #include <linux/delay.h>
 #include <linux/ethtool.h>
 #include <linux/kernel.h>
+#include <linux/mdio.h>
 #include <linux/mii.h>
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/hwmon.h>
 #include <linux/bitfield.h>
+#include <linux/of_mdio.h>
+#include <linux/of_irq.h>
 
 #define PHY_ID_MASK			0xfffffff0
 #define PHY_ID_TJA1100			0x0180dc40
 #define PHY_ID_TJA1101			0x0180dd00
+#define PHY_ID_TJA1102			0x0180dc80
 
 #define MII_ECTRL			17
 #define MII_ECTRL_LINK_CONTROL		BIT(15)
@@ -40,6 +44,10 @@
 #define MII_INTSRC_TEMP_ERR		BIT(1)
 #define MII_INTSRC_UV_ERR		BIT(3)
 
+#define MII_INTEN			22
+#define MII_INTEN_LINK_FAIL		BIT(10)
+#define MII_INTEN_LINK_UP		BIT(9)
+
 #define MII_COMMSTAT			23
 #define MII_COMMSTAT_LINK_UP		BIT(15)
 
@@ -52,6 +60,8 @@
 struct tja11xx_priv {
 	char		*hwmon_name;
 	struct device	*hwmon_dev;
+	struct phy_device *phydev;
+	struct work_struct phy_register_work;
 };
 
 struct tja11xx_phy_stats {
@@ -180,6 +190,7 @@ static int tja11xx_config_init(struct phy_device *phydev)
 			return ret;
 		break;
 	case PHY_ID_TJA1101:
+	case PHY_ID_TJA1102:
 		ret = phy_set_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP);
 		if (ret)
 			return ret;
@@ -317,16 +328,12 @@ static const struct hwmon_chip_info tja11xx_hwmon_chip_info = {
 	.info		= tja11xx_hwmon_info,
 };
 
-static int tja11xx_probe(struct phy_device *phydev)
+static int tja11xx_hwmon_register(struct phy_device *phydev,
+				  struct tja11xx_priv *priv)
 {
 	struct device *dev = &phydev->mdio.dev;
-	struct tja11xx_priv *priv;
 	int i;
 
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
 	priv->hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
 	if (!priv->hwmon_name)
 		return -ENOMEM;
@@ -344,6 +351,152 @@ static int tja11xx_probe(struct phy_device *phydev)
 	return PTR_ERR_OR_ZERO(priv->hwmon_dev);
 }
 
+static int tja11xx_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct tja11xx_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->phydev = phydev;
+
+	return tja11xx_hwmon_register(phydev, priv);
+}
+
+static void tja1102_p1_register(struct work_struct *work)
+{
+	struct tja11xx_priv *priv = container_of(work, struct tja11xx_priv,
+						 phy_register_work);
+	struct phy_device *phydev_phy0 = priv->phydev;
+	struct mii_bus *bus = phydev_phy0->mdio.bus;
+	struct device *dev = &phydev_phy0->mdio.dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child;
+	int ret;
+
+	for_each_available_child_of_node(np, child) {
+		struct phy_device *phy;
+		int addr;
+
+		addr = of_mdio_parse_addr(dev, child);
+		if (addr < 0) {
+			dev_err(dev, "Can't parse addr\n");
+			continue;
+		} else if (addr != phydev_phy0->mdio.addr + 1) {
+			/* Currently we care only about double PHY chip TJA1102.
+			 * If some day NXP will decide to bring chips with more
+			 * PHYs, this logic should be reworked.
+			 */
+			dev_err(dev, "Unexpected address. Should be: %i\n",
+				phydev_phy0->mdio.addr + 1);
+			continue;
+		}
+
+		if (mdiobus_is_registered_device(bus, addr)) {
+			dev_err(dev, "device is already registered\n");
+			continue;
+		}
+
+		/* Real PHY ID of Port 1 is 0 */
+		phy = phy_device_create(bus, addr, PHY_ID_TJA1102, false, NULL);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "Can't create PHY device for Port 1: %i\n",
+				addr);
+			continue;
+		}
+
+		/* Overwrite parent device. phy_device_create() set parent to
+		 * the mii_bus->dev, which is not correct in case.
+		 */
+		phy->mdio.dev.parent = dev;
+
+		ret = of_mdiobus_phy_device_register(bus, phy, child, addr);
+		if (ret) {
+			/* All resources needed for Port 1 should be already
+			 * available for Port 0. Both ports use the same
+			 * interrupt line, so -EPROBE_DEFER would make no sense
+			 * here.
+			 */
+			dev_err(dev, "Can't register Port 1. Unexpected error: %i\n",
+				ret);
+			phy_device_free(phy);
+		}
+	}
+}
+
+static int tja1102_p0_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct tja11xx_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->phydev = phydev;
+	INIT_WORK(&priv->phy_register_work, tja1102_p1_register);
+
+	ret = tja11xx_hwmon_register(phydev, priv);
+	if (ret)
+		return ret;
+
+	schedule_work(&priv->phy_register_work);
+
+	return 0;
+}
+
+static int tja1102_match_phy_device(struct phy_device *phydev, bool port0)
+{
+	int ret;
+
+	if ((phydev->phy_id & PHY_ID_MASK) != PHY_ID_TJA1102)
+		return 0;
+
+	ret = phy_read(phydev, MII_PHYSID2);
+	if (ret < 0)
+		return ret;
+
+	/* TJA1102 Port 1 has phyid 0 and doesn't support temperature
+	 * and undervoltage alarms.
+	 */
+	if (port0)
+		return ret ? 1 : 0;
+
+	return !ret;
+}
+
+static int tja1102_p0_match_phy_device(struct phy_device *phydev)
+{
+	return tja1102_match_phy_device(phydev, true);
+}
+
+static int tja1102_p1_match_phy_device(struct phy_device *phydev)
+{
+	return tja1102_match_phy_device(phydev, false);
+}
+
+static int tja11xx_ack_interrupt(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, MII_INTSRC);
+
+	return (ret < 0) ? ret : 0;
+}
+
+static int tja11xx_config_intr(struct phy_device *phydev)
+{
+	int value = 0;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		value = MII_INTEN_LINK_FAIL | MII_INTEN_LINK_UP;
+
+	return phy_write(phydev, MII_INTEN, value);
+}
+
 static struct phy_driver tja11xx_driver[] = {
 	{
 		PHY_ID_MATCH_MODEL(PHY_ID_TJA1100),
@@ -375,6 +528,41 @@ static struct phy_driver tja11xx_driver[] = {
 		.get_sset_count = tja11xx_get_sset_count,
 		.get_strings	= tja11xx_get_strings,
 		.get_stats	= tja11xx_get_stats,
+	}, {
+		.name		= "NXP TJA1102 Port 0",
+		.features       = PHY_BASIC_T1_FEATURES,
+		.probe		= tja1102_p0_probe,
+		.soft_reset	= tja11xx_soft_reset,
+		.config_init	= tja11xx_config_init,
+		.read_status	= tja11xx_read_status,
+		.match_phy_device = tja1102_p0_match_phy_device,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.set_loopback   = genphy_loopback,
+		/* Statistics */
+		.get_sset_count = tja11xx_get_sset_count,
+		.get_strings	= tja11xx_get_strings,
+		.get_stats	= tja11xx_get_stats,
+		.ack_interrupt	= tja11xx_ack_interrupt,
+		.config_intr	= tja11xx_config_intr,
+
+	}, {
+		.name		= "NXP TJA1102 Port 1",
+		.features       = PHY_BASIC_T1_FEATURES,
+		/* currently no probe for Port 1 is need */
+		.soft_reset	= tja11xx_soft_reset,
+		.config_init	= tja11xx_config_init,
+		.read_status	= tja11xx_read_status,
+		.match_phy_device = tja1102_p1_match_phy_device,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.set_loopback   = genphy_loopback,
+		/* Statistics */
+		.get_sset_count = tja11xx_get_sset_count,
+		.get_strings	= tja11xx_get_strings,
+		.get_stats	= tja11xx_get_stats,
+		.ack_interrupt	= tja11xx_ack_interrupt,
+		.config_intr	= tja11xx_config_intr,
 	}
 };
 
@@ -383,6 +571,7 @@ module_phy_driver(tja11xx_driver);
 static struct mdio_device_id __maybe_unused tja11xx_tbl[] = {
 	{ PHY_ID_MATCH_MODEL(PHY_ID_TJA1100) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_TJA1101) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_TJA1102) },
 	{ }
 };
 
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 67ba47ae5284..defe09d94422 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -564,6 +564,5 @@ struct phy_driver genphy_c45_driver = {
 	.phy_id         = 0xffffffff,
 	.phy_id_mask    = 0xffffffff,
 	.name           = "Generic Clause 45 PHY",
-	.soft_reset	= genphy_no_soft_reset,
 	.read_status    = genphy_c45_read_status,
 };
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ac2784192472..7e1ddd5745d2 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1082,8 +1082,12 @@ int phy_init_hw(struct phy_device *phydev)
 	if (!phydev->drv)
 		return 0;
 
-	if (phydev->drv->soft_reset)
+	if (phydev->drv->soft_reset) {
 		ret = phydev->drv->soft_reset(phydev);
+		/* see comment in genphy_soft_reset for an explanation */
+		if (!ret)
+			phydev->suspended = 0;
+	}
 
 	if (ret < 0)
 		return ret;
@@ -1524,6 +1528,9 @@ int phy_suspend(struct phy_device *phydev)
 	struct phy_driver *phydrv = phydev->drv;
 	int ret;
 
+	if (phydev->suspended)
+		return 0;
+
 	/* If the device has WOL enabled, we cannot suspend the PHY */
 	phy_ethtool_get_wol(phydev, &wol);
 	if (wol.wolopts || (netdev && netdev->wol_enabled))
@@ -2154,6 +2161,12 @@ int genphy_soft_reset(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
+	/* Clause 22 states that setting bit BMCR_RESET sets control registers
+	 * to their default value. Therefore the POWER DOWN bit is supposed to
+	 * be cleared after soft reset.
+	 */
+	phydev->suspended = 0;
+
 	ret = phy_poll_reset(phydev);
 	if (ret)
 		return ret;
@@ -2627,7 +2640,6 @@ static struct phy_driver genphy_driver = {
 	.phy_id		= 0xffffffff,
 	.phy_id_mask	= 0xffffffff,
 	.name		= "Generic PHY",
-	.soft_reset	= genphy_no_soft_reset,
 	.get_features	= genphy_read_abilities,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 34ca12aec61b..0f23bec431c1 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -480,8 +480,8 @@ static void phylink_get_fixed_state(struct phylink *pl,
 				    struct phylink_link_state *state)
 {
 	*state = pl->link_config;
-	if (pl->get_fixed_state)
-		pl->get_fixed_state(pl->netdev, state);
+	if (pl->config->get_fixed_state)
+		pl->config->get_fixed_state(pl->config, state);
 	else if (pl->link_gpio)
 		state->link = !!gpiod_get_value_cansleep(pl->link_gpio);
 
@@ -1044,32 +1044,6 @@ void phylink_disconnect_phy(struct phylink *pl)
 }
 EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
 
-/**
- * phylink_fixed_state_cb() - allow setting a fixed link callback
- * @pl: a pointer to a &struct phylink returned from phylink_create()
- * @cb: callback to execute to determine the fixed link state.
- *
- * The MAC driver should call this driver when the state of its link
- * can be determined through e.g: an out of band MMIO register.
- */
-int phylink_fixed_state_cb(struct phylink *pl,
-			   void (*cb)(struct net_device *dev,
-				      struct phylink_link_state *state))
-{
-	/* It does not make sense to let the link be overriden unless we use
-	 * MLO_AN_FIXED
-	 */
-	if (pl->cfg_link_an_mode != MLO_AN_FIXED)
-		return -EINVAL;
-
-	mutex_lock(&pl->state_mutex);
-	pl->get_fixed_state = cb;
-	mutex_unlock(&pl->state_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(phylink_fixed_state_cb);
-
 /**
  * phylink_mac_change() - notify phylink of a change in MAC state
  * @pl: a pointer to a &struct phylink returned from phylink_create()
@@ -1106,6 +1080,8 @@ static irqreturn_t phylink_link_handler(int irq, void *data)
  */
 void phylink_start(struct phylink *pl)
 {
+	bool poll = false;
+
 	ASSERT_RTNL();
 
 	phylink_info(pl, "configuring for %s/%s link mode\n",
@@ -1142,10 +1118,18 @@ void phylink_start(struct phylink *pl)
 				irq = 0;
 		}
 		if (irq <= 0)
-			mod_timer(&pl->link_poll, jiffies + HZ);
+			poll = true;
+	}
+
+	switch (pl->cfg_link_an_mode) {
+	case MLO_AN_FIXED:
+		poll |= pl->config->poll_fixed_state;
+		break;
+	case MLO_AN_INBAND:
+		poll |= pl->config->pcs_poll;
+		break;
 	}
-	if ((pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) ||
-	    pl->config->pcs_poll)
+	if (poll)
 		mod_timer(&pl->link_poll, jiffies + HZ);
 	if (pl->phydev)
 		phy_start(pl->phydev);
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 2d99e9de6ee1..c7229d022a27 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -11,6 +11,7 @@
 #include <linux/bitops.h>
 #include <linux/phy.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 
 #define RTL821x_PHYSR				0x11
 #define RTL821x_PHYSR_DUPLEX			BIT(13)
@@ -526,6 +527,16 @@ static int rtl8125_match_phy_device(struct phy_device *phydev)
 	       rtlgen_supports_2_5gbps(phydev);
 }
 
+static int rtlgen_resume(struct phy_device *phydev)
+{
+	int ret = genphy_resume(phydev);
+
+	/* Internal PHY's from RTL8168h up may not be instantly ready */
+	msleep(20);
+
+	return ret;
+}
+
 static struct phy_driver realtek_drvs[] = {
 	{
 		PHY_ID_MATCH_EXACT(0x00008201),
@@ -609,7 +620,7 @@ static struct phy_driver realtek_drvs[] = {
 		.match_phy_device = rtlgen_match_phy_device,
 		.read_status	= rtlgen_read_status,
 		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
+		.resume		= rtlgen_resume,
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
 		.read_mmd	= rtlgen_read_mmd,
@@ -621,7 +632,7 @@ static struct phy_driver realtek_drvs[] = {
 		.config_aneg	= rtl8125_config_aneg,
 		.read_status	= rtl8125_read_status,
 		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
+		.resume		= rtlgen_resume,
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
 		.read_mmd	= rtl8125_read_mmd,
diff --git a/drivers/net/phy/swphy.c b/drivers/net/phy/swphy.c
index 53c214a22b95..59f1ba4d49bc 100644
--- a/drivers/net/phy/swphy.c
+++ b/drivers/net/phy/swphy.c
@@ -2,7 +2,7 @@
 /*
  * Software PHY emulation
  *
- * Code taken from fixed_phy.c by Russell King <rmk+kernel@arm.linux.org.uk>
+ * Code taken from fixed_phy.c by Russell King.
  *
  * Author: Vitaly Bordug <vbordug@ru.mvista.com>
  *         Anton Vorontsov <avorontsov@ru.mvista.com>
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index beb054b931ee..8057ea8dbc21 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -78,7 +78,6 @@ static struct phy_driver teranetics_driver[] = {
 	.phy_id_mask	= 0xffffffff,
 	.name		= "Teranetics TN2020",
 	.features       = PHY_10GBIT_FEATURES,
-	.soft_reset	= genphy_no_soft_reset,
 	.aneg_done	= teranetics_aneg_done,
 	.config_aneg    = gen10g_config_aneg,
 	.read_status	= teranetics_read_status,
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index dbc0e3f7a3e2..3e21726c36e8 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -336,7 +336,7 @@ config DLCI
 
 	  To use frame relay, you need supporting hardware (called FRAD) and
 	  certain programs from the net-tools package as explained in
-	  <file:Documentation/networking/framerelay.txt>.
+	  <file:Documentation/networking/framerelay.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called dlci.
@@ -361,7 +361,7 @@ config SDLA
 
 	  These are multi-protocol cards, but only Frame Relay is supported
 	  by the driver at this time. Please read
-	  <file:Documentation/networking/framerelay.txt>.
+	  <file:Documentation/networking/framerelay.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called sdla.
diff --git a/drivers/net/wireguard/queueing.c b/drivers/net/wireguard/queueing.c
index 5c964fcb994e..71b8e80b58e1 100644
--- a/drivers/net/wireguard/queueing.c
+++ b/drivers/net/wireguard/queueing.c
@@ -35,8 +35,10 @@ int wg_packet_queue_init(struct crypt_queue *queue, work_func_t function,
 		if (multicore) {
 			queue->worker = wg_packet_percpu_multicore_worker_alloc(
 				function, queue);
-			if (!queue->worker)
+			if (!queue->worker) {
+				ptr_ring_cleanup(&queue->ring, NULL);
 				return -ENOMEM;
+			}
 		} else {
 			INIT_WORK(&queue->work, function);
 		}
diff --git a/drivers/net/wireguard/receive.c b/drivers/net/wireguard/receive.c
index da3b782ab7d3..267f202f1931 100644
--- a/drivers/net/wireguard/receive.c
+++ b/drivers/net/wireguard/receive.c
@@ -393,13 +393,11 @@ static void wg_packet_consume_data_done(struct wg_peer *peer,
 		len = ntohs(ip_hdr(skb)->tot_len);
 		if (unlikely(len < sizeof(struct iphdr)))
 			goto dishonest_packet_size;
-		if (INET_ECN_is_ce(PACKET_CB(skb)->ds))
-			IP_ECN_set_ce(ip_hdr(skb));
+		INET_ECN_decapsulate(skb, PACKET_CB(skb)->ds, ip_hdr(skb)->tos);
 	} else if (skb->protocol == htons(ETH_P_IPV6)) {
 		len = ntohs(ipv6_hdr(skb)->payload_len) +
 		      sizeof(struct ipv6hdr);
-		if (INET_ECN_is_ce(PACKET_CB(skb)->ds))
-			IP6_ECN_set_ce(skb, ipv6_hdr(skb));
+		INET_ECN_decapsulate(skb, PACKET_CB(skb)->ds, ipv6_get_dsfield(ipv6_hdr(skb)));
 	} else {
 		goto dishonest_packet_type;
 	}
diff --git a/drivers/net/wireguard/send.c b/drivers/net/wireguard/send.c
index 7348c10cbae3..3e030d614df5 100644
--- a/drivers/net/wireguard/send.c
+++ b/drivers/net/wireguard/send.c
@@ -304,7 +304,6 @@ void wg_packet_encrypt_worker(struct work_struct *work)
 		}
 		wg_queue_enqueue_per_peer(&PACKET_PEER(first)->tx_queue, first,
 					  state);
-
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index a7478c240f78..41b5ea25ca57 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -110,7 +110,7 @@ struct ath10k_ce_ring {
 	struct ce_desc_64 *shadow_base;
 
 	/* keep last */
-	void *per_transfer_context[0];
+	void *per_transfer_context[];
 };
 
 struct ath10k_ce_pipe {
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index f26cc6989dad..52472bbcee1f 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -723,10 +723,7 @@ static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
 	if (ret)
 		return ret;
 
-	/* Data transfer is not initiated, when reduced Tx completion
-	 * is used for SDIO. disable it until fixed
-	 */
-	param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
+	param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
 
 	/* Alternate credit size of 1544 as used by SDIO firmware is
 	 * not big enough for mac80211 / native wifi frames. disable it
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index bd8ef576c590..829c2f9244e8 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -1228,7 +1228,7 @@ struct ath10k {
 	int coex_gpio_pin;
 
 	/* must be last */
-	u8 drv_priv[0] __aligned(sizeof(void *));
+	u8 drv_priv[] __aligned(sizeof(void *));
 };
 
 static inline bool ath10k_peer_stats_enabled(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/coredump.h b/drivers/net/wireless/ath/ath10k/coredump.h
index 8bf03e8c1d3a..e760ce1a5f1e 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.h
+++ b/drivers/net/wireless/ath/ath10k/coredump.h
@@ -88,7 +88,7 @@ struct ath10k_dump_file_data {
 	u8 unused[128];
 
 	/* struct ath10k_tlv_dump_data + more */
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 struct ath10k_dump_ram_data_hdr {
@@ -100,7 +100,7 @@ struct ath10k_dump_ram_data_hdr {
 	/* length of payload data, not including this header */
 	__le32 length;
 
-	u8 data[0];
+	u8 data[];
 };
 
 /* magic number to fill the holes not copied due to sections in regions */
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 82f7eb8583d9..099cc438e231 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -65,7 +65,7 @@ struct ath10k_pktlog_hdr {
 	__le16 log_type; /* Type of log information foll this header */
 	__le16 size; /* Size of variable length log information in bytes */
 	__le32 timestamp;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 /* FIXME: How to calculate the buffer size sanely? */
diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h
index 496ee34a4d78..0dd8973d0acf 100644
--- a/drivers/net/wireless/ath/ath10k/hif.h
+++ b/drivers/net/wireless/ath/ath10k/hif.h
@@ -56,6 +56,8 @@ struct ath10k_hif_ops {
 
 	int (*swap_mailbox)(struct ath10k *ar);
 
+	int (*get_htt_tx_complete)(struct ath10k *ar);
+
 	int (*map_service_to_pipe)(struct ath10k *ar, u16 service_id,
 				   u8 *ul_pipe, u8 *dl_pipe);
 
@@ -144,6 +146,13 @@ static inline int ath10k_hif_swap_mailbox(struct ath10k *ar)
 	return 0;
 }
 
+static inline int ath10k_hif_get_htt_tx_complete(struct ath10k *ar)
+{
+	if (ar->hif.ops->get_htt_tx_complete)
+		return ar->hif.ops->get_htt_tx_complete(ar);
+	return 0;
+}
+
 static inline int ath10k_hif_map_service_to_pipe(struct ath10k *ar,
 						 u16 service_id,
 						 u8 *ul_pipe, u8 *dl_pipe)
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 2248d6c022f4..61ee413d902a 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -660,6 +660,16 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 	return 0;
 }
 
+void ath10k_htc_change_tx_credit_flow(struct ath10k_htc *htc,
+				      enum ath10k_htc_ep_id eid,
+				      bool enable)
+{
+	struct ath10k *ar = htc->ar;
+	struct ath10k_htc_ep *ep = &ar->htc.endpoint[eid];
+
+	ep->tx_credit_flow_enabled = enable;
+}
+
 int ath10k_htc_connect_service(struct ath10k_htc *htc,
 			       struct ath10k_htc_svc_conn_req *conn_req,
 			       struct ath10k_htc_svc_conn_resp *conn_resp)
diff --git a/drivers/net/wireless/ath/ath10k/htc.h b/drivers/net/wireless/ath/ath10k/htc.h
index 065c82d9d689..14e5c3f712c1 100644
--- a/drivers/net/wireless/ath/ath10k/htc.h
+++ b/drivers/net/wireless/ath/ath10k/htc.h
@@ -386,6 +386,9 @@ int ath10k_htc_start(struct ath10k_htc *htc);
 int ath10k_htc_connect_service(struct ath10k_htc *htc,
 			       struct ath10k_htc_svc_conn_req  *conn_req,
 			       struct ath10k_htc_svc_conn_resp *conn_resp);
+void ath10k_htc_change_tx_credit_flow(struct ath10k_htc *htc,
+				      enum ath10k_htc_ep_id eid,
+				      bool enable);
 int ath10k_htc_send(struct ath10k_htc *htc, enum ath10k_htc_ep_id eid,
 		    struct sk_buff *packet);
 struct sk_buff *ath10k_htc_alloc_skb(struct ath10k *ar, int size);
diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
index 7b75200ceae5..4354bf285ff1 100644
--- a/drivers/net/wireless/ath/ath10k/htt.c
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -10,6 +10,7 @@
 #include "htt.h"
 #include "core.h"
 #include "debug.h"
+#include "hif.h"
 
 static const enum htt_t2h_msg_type htt_main_t2h_msg_types[] = {
 	[HTT_MAIN_T2H_MSG_TYPE_VERSION_CONF] = HTT_T2H_MSG_TYPE_VERSION_CONF,
@@ -153,6 +154,10 @@ int ath10k_htt_connect(struct ath10k_htt *htt)
 
 	htt->eid = conn_resp.eid;
 
+	htt->disable_tx_comp = ath10k_hif_get_htt_tx_complete(htt->ar);
+	if (htt->disable_tx_comp)
+		ath10k_htc_change_tx_credit_flow(&htt->ar->htc, htt->eid, true);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 4a12564fc30e..e7096a73c6ca 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -150,9 +150,19 @@ enum htt_data_tx_desc_flags1 {
 	HTT_DATA_TX_DESC_FLAGS1_MORE_IN_BATCH    = 1 << 12,
 	HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD = 1 << 13,
 	HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD = 1 << 14,
-	HTT_DATA_TX_DESC_FLAGS1_RSVD1            = 1 << 15
+	HTT_DATA_TX_DESC_FLAGS1_TX_COMPLETE      = 1 << 15
 };
 
+#define HTT_TX_CREDIT_DELTA_ABS_M      0xffff0000
+#define HTT_TX_CREDIT_DELTA_ABS_S      16
+#define HTT_TX_CREDIT_DELTA_ABS_GET(word) \
+	    (((word) & HTT_TX_CREDIT_DELTA_ABS_M) >> HTT_TX_CREDIT_DELTA_ABS_S)
+
+#define HTT_TX_CREDIT_SIGN_BIT_M       0x00000100
+#define HTT_TX_CREDIT_SIGN_BIT_S       8
+#define HTT_TX_CREDIT_SIGN_BIT_GET(word) \
+	    (((word) & HTT_TX_CREDIT_SIGN_BIT_M) >> HTT_TX_CREDIT_SIGN_BIT_S)
+
 enum htt_data_tx_ext_tid {
 	HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST = 16,
 	HTT_DATA_TX_EXT_TID_MGMT                = 17,
@@ -279,12 +289,12 @@ struct htt_rx_ring_setup_hdr {
 
 struct htt_rx_ring_setup_32 {
 	struct htt_rx_ring_setup_hdr hdr;
-	struct htt_rx_ring_setup_ring32 rings[0];
+	struct htt_rx_ring_setup_ring32 rings[];
 } __packed;
 
 struct htt_rx_ring_setup_64 {
 	struct htt_rx_ring_setup_hdr hdr;
-	struct htt_rx_ring_setup_ring64 rings[0];
+	struct htt_rx_ring_setup_ring64 rings[];
 } __packed;
 
 /*
@@ -722,7 +732,7 @@ struct htt_rx_indication {
 	 * %mpdu_ranges starts after &%prefix + roundup(%fw_rx_desc_bytes, 4)
 	 * and has %num_mpdu_ranges elements.
 	 */
-	struct htt_rx_indication_mpdu_range mpdu_ranges[0];
+	struct htt_rx_indication_mpdu_range mpdu_ranges[];
 } __packed;
 
 /* High latency version of the RX indication */
@@ -731,7 +741,7 @@ struct htt_rx_indication_hl {
 	struct htt_rx_indication_ppdu ppdu;
 	struct htt_rx_indication_prefix prefix;
 	struct fw_rx_desc_hl fw_desc;
-	struct htt_rx_indication_mpdu_range mpdu_ranges[0];
+	struct htt_rx_indication_mpdu_range mpdu_ranges[];
 } __packed;
 
 struct htt_hl_rx_desc {
@@ -898,7 +908,7 @@ struct htt_append_retries {
 struct htt_data_tx_completion_ext {
 	struct htt_append_retries a_retries;
 	__le32 t_stamp;
-	__le16 msdus_rssi[0];
+	__le16 msdus_rssi[];
 } __packed;
 
 /**
@@ -982,7 +992,7 @@ struct htt_data_tx_completion {
 	} __packed;
 	u8 num_msdus;
 	u8 flags2; /* HTT_TX_CMPL_FLAG_DATA_RSSI */
-	__le16 msdus[0]; /* variable length based on %num_msdus */
+	__le16 msdus[]; /* variable length based on %num_msdus */
 } __packed;
 
 #define HTT_TX_PPDU_DUR_INFO0_PEER_ID_MASK	GENMASK(15, 0)
@@ -997,7 +1007,7 @@ struct htt_data_tx_ppdu_dur {
 
 struct htt_data_tx_compl_ppdu_dur {
 	__le32 info0; /* HTT_TX_COMPL_PPDU_DUR_INFO0_ */
-	struct htt_data_tx_ppdu_dur ppdu_dur[0];
+	struct htt_data_tx_ppdu_dur ppdu_dur[];
 } __packed;
 
 struct htt_tx_compl_ind_base {
@@ -1023,7 +1033,7 @@ struct htt_rc_update {
 	u8 addr[6];
 	u8 num_elems;
 	u8 rsvd0;
-	struct htt_rc_tx_done_params params[0]; /* variable length %num_elems */
+	struct htt_rc_tx_done_params params[]; /* variable length %num_elems */
 } __packed;
 
 /* see htt_rx_indication for similar fields and descriptions */
@@ -1040,7 +1050,7 @@ struct htt_rx_fragment_indication {
 	__le16 fw_rx_desc_bytes;
 	__le16 rsvd0;
 
-	u8 fw_msdu_rx_desc[0];
+	u8 fw_msdu_rx_desc[];
 } __packed;
 
 #define ATH10K_IEEE80211_EXTIV               BIT(5)
@@ -1065,7 +1075,7 @@ struct htt_rx_pn_ind {
 	u8 seqno_end;
 	u8 pn_ie_count;
 	u8 reserved;
-	u8 pn_ies[0];
+	u8 pn_ies[];
 } __packed;
 
 struct htt_rx_offload_msdu {
@@ -1074,7 +1084,7 @@ struct htt_rx_offload_msdu {
 	u8 vdev_id;
 	u8 tid;
 	u8 fw_desc;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct htt_rx_offload_ind {
@@ -1157,7 +1167,7 @@ struct htt_rx_test {
 	 *  a) num_ints * sizeof(__le32)
 	 *  b) num_chars * sizeof(u8) aligned to 4bytes
 	 */
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 static inline __le32 *htt_rx_test_get_ints(struct htt_rx_test *rx_test)
@@ -1191,7 +1201,7 @@ static inline u8 *htt_rx_test_get_chars(struct htt_rx_test *rx_test)
  */
 struct htt_pktlog_msg {
 	u8 pad[3];
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct htt_dbg_stats_rx_reorder_stats {
@@ -1480,7 +1490,7 @@ struct htt_stats_conf_item {
 	} __packed;
 	u8 pad;
 	__le16 length;
-	u8 payload[0]; /* roundup(length, 4) long */
+	u8 payload[]; /* roundup(length, 4) long */
 } __packed;
 
 struct htt_stats_conf {
@@ -1489,7 +1499,7 @@ struct htt_stats_conf {
 	__le32 cookie_msb;
 
 	/* each item has variable length! */
-	struct htt_stats_conf_item items[0];
+	struct htt_stats_conf_item items[];
 } __packed;
 
 static inline struct htt_stats_conf_item *htt_stats_conf_next_item(
@@ -1664,7 +1674,7 @@ struct htt_tx_fetch_ind {
 	__le16 num_resp_ids;
 	__le16 num_records;
 	struct htt_tx_fetch_record records[0];
-	__le32 resp_ids[0]; /* ath10k_htt_get_tx_fetch_ind_resp_ids() */
+	__le32 resp_ids[]; /* ath10k_htt_get_tx_fetch_ind_resp_ids() */
 } __packed;
 
 static inline void *
@@ -1679,13 +1689,13 @@ struct htt_tx_fetch_resp {
 	__le16 fetch_seq_num;
 	__le16 num_records;
 	__le32 token;
-	struct htt_tx_fetch_record records[0];
+	struct htt_tx_fetch_record records[];
 } __packed;
 
 struct htt_tx_fetch_confirm {
 	u8 pad0;
 	__le16 num_resp_ids;
-	__le32 resp_ids[0];
+	__le32 resp_ids[];
 } __packed;
 
 enum htt_tx_mode_switch_mode {
@@ -1717,7 +1727,7 @@ struct htt_tx_mode_switch_ind {
 	__le16 info0; /* HTT_TX_MODE_SWITCH_IND_INFO0_ */
 	__le16 info1; /* HTT_TX_MODE_SWITCH_IND_INFO1_ */
 	u8 pad1[2];
-	struct htt_tx_mode_switch_record records[0];
+	struct htt_tx_mode_switch_record records[];
 } __packed;
 
 struct htt_channel_change {
@@ -1747,7 +1757,7 @@ struct htt_peer_tx_stats {
 	u8 num_ppdu;
 	u8 ppdu_len;
 	u8 version;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 #define ATH10K_10_2_TX_STATS_OFFSET	136
@@ -2021,6 +2031,7 @@ struct ath10k_htt {
 	bool tx_mem_allocated;
 	const struct ath10k_htt_tx_ops *tx_ops;
 	const struct ath10k_htt_rx_ops *rx_ops;
+	bool disable_tx_comp;
 };
 
 struct ath10k_htt_tx_ops {
@@ -2185,7 +2196,7 @@ struct htt_rx_desc {
 		struct rx_ppdu_end ppdu_end;
 	} __packed;
 	u8 rx_hdr_status[RX_HTT_HDR_STATUS_LEN];
-	u8 msdu_payload[0];
+	u8 msdu_payload[];
 };
 
 #define HTT_RX_DESC_HL_INFO_SEQ_NUM_MASK           0x00000fff
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index f883f2a724dd..64e45bfa5d05 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -3789,6 +3789,9 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 	}
 	case HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION: {
 		struct htt_tx_done tx_done = {};
+		struct ath10k_htt *htt = &ar->htt;
+		struct ath10k_htc *htc = &ar->htc;
+		struct ath10k_htc_ep *ep = &ar->htc.endpoint[htt->eid];
 		int status = __le32_to_cpu(resp->mgmt_tx_completion.status);
 		int info = __le32_to_cpu(resp->mgmt_tx_completion.info);
 
@@ -3814,6 +3817,12 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 			break;
 		}
 
+		if (htt->disable_tx_comp) {
+			spin_lock_bh(&htc->tx_lock);
+			ep->tx_credits++;
+			spin_unlock_bh(&htc->tx_lock);
+		}
+
 		status = ath10k_txrx_tx_unref(htt, &tx_done);
 		if (!status) {
 			spin_lock_bh(&htt->tx_lock);
@@ -3888,8 +3897,31 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		skb_queue_tail(&htt->rx_in_ord_compl_q, skb);
 		return false;
 	}
-	case HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND:
+	case HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND: {
+		struct ath10k_htt *htt = &ar->htt;
+		struct ath10k_htc *htc = &ar->htc;
+		struct ath10k_htc_ep *ep = &ar->htc.endpoint[htt->eid];
+		u32 msg_word = __le32_to_cpu(*(__le32 *)resp);
+		int htt_credit_delta;
+
+		htt_credit_delta = HTT_TX_CREDIT_DELTA_ABS_GET(msg_word);
+		if (HTT_TX_CREDIT_SIGN_BIT_GET(msg_word))
+			htt_credit_delta = -htt_credit_delta;
+
+		ath10k_dbg(ar, ATH10K_DBG_HTT,
+			   "htt credit update delta %d\n",
+			   htt_credit_delta);
+
+		if (htt->disable_tx_comp) {
+			spin_lock_bh(&htc->tx_lock);
+			ep->tx_credits += htt_credit_delta;
+			spin_unlock_bh(&htc->tx_lock);
+			ath10k_dbg(ar, ATH10K_DBG_HTT,
+				   "htt credit total %d\n",
+				   ep->tx_credits);
+		}
 		break;
+	}
 	case HTT_T2H_MSG_TYPE_CHAN_CHANGE: {
 		u32 phymode = __le32_to_cpu(resp->chan_change.phymode);
 		u32 freq = __le32_to_cpu(resp->chan_change.freq);
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index e9d12ea708b6..bcecf05fe2fd 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -543,7 +543,39 @@ void ath10k_htt_tx_free(struct ath10k_htt *htt)
 
 void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb)
 {
+	struct ath10k_htt *htt = &ar->htt;
+	struct htt_tx_done tx_done = {0};
+	struct htt_cmd_hdr *htt_hdr;
+	struct htt_data_tx_desc *desc_hdr = NULL;
+	u16 flags1 = 0;
+	u8 msg_type = 0;
+
+	if (htt->disable_tx_comp) {
+		htt_hdr = (struct htt_cmd_hdr *)skb->data;
+		msg_type = htt_hdr->msg_type;
+
+		if (msg_type == HTT_H2T_MSG_TYPE_TX_FRM) {
+			desc_hdr = (struct htt_data_tx_desc *)
+				(skb->data + sizeof(*htt_hdr));
+			flags1 = __le16_to_cpu(desc_hdr->flags1);
+		}
+	}
+
 	dev_kfree_skb_any(skb);
+
+	if ((!htt->disable_tx_comp) || (msg_type != HTT_H2T_MSG_TYPE_TX_FRM))
+		return;
+
+	ath10k_dbg(ar, ATH10K_DBG_HTT,
+		   "htt tx complete msdu id:%u ,flags1:%x\n",
+		   __le16_to_cpu(desc_hdr->id), flags1);
+
+	if (flags1 & HTT_DATA_TX_DESC_FLAGS1_TX_COMPLETE)
+		return;
+
+	tx_done.status = HTT_TX_COMPL_STATE_ACK;
+	tx_done.msdu_id = __le16_to_cpu(desc_hdr->id);
+	ath10k_txrx_tx_unref(&ar->htt, &tx_done);
 }
 
 void ath10k_htt_hif_tx_complete(struct ath10k *ar, struct sk_buff *skb)
@@ -1279,6 +1311,9 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm
 		flags0 |= SM(ATH10K_HW_TXRX_MGMT,
 			     HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
 		flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
+
+		if (htt->disable_tx_comp)
+			flags1 |= HTT_DATA_TX_DESC_FLAGS1_TX_COMPLETE;
 		break;
 	}
 
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 970c736ac6bb..92c0595abcd0 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -165,7 +165,7 @@ enum qca9377_chip_id_rev {
 struct ath10k_fw_ie {
 	__le32 id;
 	__le32 len;
-	u8 data[0];
+	u8 data[];
 };
 
 enum ath10k_fw_ie_type {
@@ -765,7 +765,7 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw,
 #define TARGET_TLV_NUM_TDLS_VDEVS		1
 #define TARGET_TLV_NUM_TIDS			((TARGET_TLV_NUM_PEERS) * 2)
 #define TARGET_TLV_NUM_MSDU_DESC		(1024 + 32)
-#define TARGET_TLV_NUM_MSDU_DESC_HL		64
+#define TARGET_TLV_NUM_MSDU_DESC_HL		1024
 #define TARGET_TLV_NUM_WOW_PATTERNS		22
 #define TARGET_TLV_MGMT_NUM_MSDU_DESC		(50)
 
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2d03b8dd3b8c..a59a7a5631a8 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2505,6 +2505,30 @@ ath10k_peer_assoc_h_vht_limit(u16 tx_mcs_set,
 	return tx_mcs_set;
 }
 
+static u32 get_160mhz_nss_from_maxrate(int rate)
+{
+	u32 nss;
+
+	switch (rate) {
+	case 780:
+		nss = 1;
+		break;
+	case 1560:
+		nss = 2;
+		break;
+	case 2106:
+		nss = 3; /* not support MCS9 from spec*/
+		break;
+	case 3120:
+		nss = 4;
+		break;
+	default:
+		 nss = 1;
+	}
+
+	return nss;
+}
+
 static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 				    struct ieee80211_vif *vif,
 				    struct ieee80211_sta *sta,
@@ -2512,6 +2536,7 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 {
 	const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
 	struct ath10k_vif *arvif = (void *)vif->drv_priv;
+	struct ath10k_hw_params *hw = &ar->hw_params;
 	struct cfg80211_chan_def def;
 	enum nl80211_band band;
 	const u16 *vht_mcs_mask;
@@ -2578,22 +2603,38 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 	arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit(
 		__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask);
 
-	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
-		   sta->addr, arg->peer_max_mpdu, arg->peer_flags);
+	/* Configure bandwidth-NSS mapping to FW
+	 * for the chip's tx chains setting on 160Mhz bw
+	 */
+	if (arg->peer_phymode == MODE_11AC_VHT160 ||
+	    arg->peer_phymode == MODE_11AC_VHT80_80) {
+		u32 rx_nss;
+		u32 max_rate;
 
-	if (arg->peer_vht_rates.rx_max_rate &&
-	    (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK)) {
-		switch (arg->peer_vht_rates.rx_max_rate) {
-		case 1560:
-			/* Must be 2x2 at 160Mhz is all it can do. */
-			arg->peer_bw_rxnss_override = 2;
-			break;
-		case 780:
-			/* Can only do 1x1 at 160Mhz (Long Guard Interval) */
-			arg->peer_bw_rxnss_override = 1;
-			break;
+		max_rate = arg->peer_vht_rates.rx_max_rate;
+		rx_nss = get_160mhz_nss_from_maxrate(max_rate);
+
+		if (rx_nss == 0)
+			rx_nss = arg->peer_num_spatial_streams;
+		else
+			rx_nss = min(arg->peer_num_spatial_streams, rx_nss);
+
+		max_rate = hw->vht160_mcs_tx_highest;
+		rx_nss = min(rx_nss, get_160mhz_nss_from_maxrate(max_rate));
+
+		arg->peer_bw_rxnss_override =
+			FIELD_PREP(WMI_PEER_NSS_MAP_ENABLE, 1) |
+			FIELD_PREP(WMI_PEER_NSS_160MHZ_MASK, (rx_nss - 1));
+
+		if (arg->peer_phymode == MODE_11AC_VHT80_80) {
+			arg->peer_bw_rxnss_override |=
+			FIELD_PREP(WMI_PEER_NSS_80_80MHZ_MASK, (rx_nss - 1));
 		}
 	}
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac vht peer %pM max_mpdu %d flags 0x%x peer_rx_nss_override 0x%x\n",
+		   sta->addr, arg->peer_max_mpdu,
+		   arg->peer_flags, arg->peer_bw_rxnss_override);
 }
 
 static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
@@ -2745,9 +2786,9 @@ static int ath10k_peer_assoc_prepare(struct ath10k *ar,
 	ath10k_peer_assoc_h_crypto(ar, vif, sta, arg);
 	ath10k_peer_assoc_h_rates(ar, vif, sta, arg);
 	ath10k_peer_assoc_h_ht(ar, vif, sta, arg);
+	ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
 	ath10k_peer_assoc_h_vht(ar, vif, sta, arg);
 	ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
-	ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
 
 	return 0;
 }
@@ -4563,13 +4604,6 @@ static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
 		vht_cap.cap |= val;
 	}
 
-	/* Currently the firmware seems to be buggy, don't enable 80+80
-	 * mode until that's resolved.
-	 */
-	if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) &&
-	    (ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == 0)
-		vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
-
 	mcs_map = 0;
 	for (i = 0; i < 8; i++) {
 		if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
@@ -8625,7 +8659,9 @@ static const struct ieee80211_iface_combination ath10k_10_4_if_comb[] = {
 		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
 					BIT(NL80211_CHAN_WIDTH_20) |
 					BIT(NL80211_CHAN_WIDTH_40) |
-					BIT(NL80211_CHAN_WIDTH_80),
+					BIT(NL80211_CHAN_WIDTH_80) |
+					BIT(NL80211_CHAN_WIDTH_80P80) |
+					BIT(NL80211_CHAN_WIDTH_160),
 #endif
 	},
 };
@@ -8643,7 +8679,9 @@ ieee80211_iface_combination ath10k_10_4_bcn_int_if_comb[] = {
 		.radar_detect_widths =  BIT(NL80211_CHAN_WIDTH_20_NOHT) |
 					BIT(NL80211_CHAN_WIDTH_20) |
 					BIT(NL80211_CHAN_WIDTH_40) |
-					BIT(NL80211_CHAN_WIDTH_80),
+					BIT(NL80211_CHAN_WIDTH_80) |
+					BIT(NL80211_CHAN_WIDTH_80P80) |
+					BIT(NL80211_CHAN_WIDTH_160),
 #endif
 	},
 };
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index ded7a220a4aa..cd1c5d60261f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2074,6 +2074,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	ath10k_pci_irq_sync(ar);
 	napi_synchronize(&ar->napi);
 	napi_disable(&ar->napi);
+	cancel_work_sync(&ar_pci->dump_work);
 
 	/* Most likely the device has HTT Rx ring configured. The only way to
 	 * prevent the device from accessing (and possible corrupting) host
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index 4455ed6c5275..1254412f06dd 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -182,7 +182,7 @@ struct ath10k_pci {
 	 * allocated (ahb support enabled case) in the continuation of
 	 * this struct.
 	 */
-	struct ath10k_ahb ahb[0];
+	struct ath10k_ahb ahb[];
 };
 
 static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 1f709b65c29b..5a0db342e5ad 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -1752,6 +1752,28 @@ static int ath10k_sdio_hif_swap_mailbox(struct ath10k *ar)
 	return 0;
 }
 
+static int ath10k_sdio_get_htt_tx_complete(struct ath10k *ar)
+{
+	u32 addr, val;
+	int ret;
+
+	addr = host_interest_item_address(HI_ITEM(hi_acs_flags));
+
+	ret = ath10k_sdio_hif_diag_read32(ar, addr, &val);
+	if (ret) {
+		ath10k_warn(ar,
+			    "unable to read hi_acs_flags for htt tx comple : %d\n", ret);
+		return ret;
+	}
+
+	ret = (val & HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK);
+
+	ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio reduce tx complete fw%sack\n",
+		   ret ? " " : " not ");
+
+	return ret;
+}
+
 /* HIF start/stop */
 
 static int ath10k_sdio_hif_start(struct ath10k *ar)
@@ -2026,6 +2048,7 @@ static const struct ath10k_hif_ops ath10k_sdio_hif_ops = {
 	.start			= ath10k_sdio_hif_start,
 	.stop			= ath10k_sdio_hif_stop,
 	.swap_mailbox		= ath10k_sdio_hif_swap_mailbox,
+	.get_htt_tx_complete	= ath10k_sdio_get_htt_tx_complete,
 	.map_service_to_pipe	= ath10k_sdio_hif_map_service_to_pipe,
 	.get_default_pipe	= ath10k_sdio_hif_get_default_pipe,
 	.send_complete_check	= ath10k_sdio_hif_send_complete_check,
diff --git a/drivers/net/wireless/ath/ath10k/sdio.h b/drivers/net/wireless/ath/ath10k/sdio.h
index 33195f49acab..1c987494ad22 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.h
+++ b/drivers/net/wireless/ath/ath10k/sdio.h
@@ -37,7 +37,7 @@
 	(ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr))
 
 #define ATH10K_HIF_MBOX_NUM_MAX                 4
-#define ATH10K_SDIO_BUS_REQUEST_MAX_NUM         64
+#define ATH10K_SDIO_BUS_REQUEST_MAX_NUM         1024
 
 #define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ)
 
@@ -98,6 +98,7 @@
 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF
 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000
 
+/* TODO: remove this and use skb->cb instead, much cleaner approach */
 struct ath10k_sdio_bus_request {
 	struct list_head list;
 
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 39abf8b12903..f46b9083bbf1 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -84,9 +84,11 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 		wake_up(&htt->empty_tx_wq);
 	spin_unlock_bh(&htt->tx_lock);
 
+	rcu_read_lock();
 	if (txq && txq->sta && skb_cb->airtime_est)
 		ieee80211_sta_register_airtime(txq->sta, txq->tid,
 					       skb_cb->airtime_est, 0);
+	rcu_read_unlock();
 
 	if (ar->bus_param.dev_type != ATH10K_DEV_TYPE_HL)
 		dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 4e68debda9bf..e1ab900f2662 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2123,7 +2123,7 @@ ath10k_wmi_tlv_op_gen_vdev_start(struct ath10k *ar,
 	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_CHANNEL);
 	tlv->len = __cpu_to_le16(sizeof(*ch));
 	ch = (void *)tlv->value;
-	ath10k_wmi_put_wmi_channel(ch, &arg->channel);
+	ath10k_wmi_put_wmi_channel(ar, ch, &arg->channel);
 
 	ptr += sizeof(*tlv);
 	ptr += sizeof(*ch);
@@ -2763,7 +2763,7 @@ ath10k_wmi_tlv_op_gen_scan_chan_list(struct ath10k *ar,
 		tlv->len = __cpu_to_le16(sizeof(*ci));
 		ci = (void *)tlv->value;
 
-		ath10k_wmi_put_wmi_channel(ci, ch);
+		ath10k_wmi_put_wmi_channel(ar, ci, ch);
 
 		chans += sizeof(*tlv);
 		chans += sizeof(*ci);
@@ -3450,7 +3450,7 @@ ath10k_wmi_tlv_op_gen_tdls_peer_update(struct ath10k *ar,
 		tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_CHANNEL);
 		tlv->len = __cpu_to_le16(sizeof(*chan));
 		chan = (void *)tlv->value;
-		ath10k_wmi_put_wmi_channel(chan, &chan_arg[i]);
+		ath10k_wmi_put_wmi_channel(ar, chan, &chan_arg[i]);
 
 		ptr += sizeof(*tlv);
 		ptr += sizeof(*chan);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 4972dc12991c..4d49eb4b7f3d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1623,7 +1623,7 @@ wmi_tlv_svc_map_ext(const __le32 *in, unsigned long *out, size_t len)
 struct wmi_tlv {
 	__le16 len;
 	__le16 tag;
-	u8 value[0];
+	u8 value[];
 } __packed;
 
 struct ath10k_mgmt_tx_pkt_addr {
@@ -2023,7 +2023,7 @@ struct wmi_tlv_bcn_tx_status_ev {
 struct wmi_tlv_bcn_prb_info {
 	__le32 caps;
 	__le32 erp;
-	u8 ies[0];
+	u8 ies[];
 } __packed;
 
 struct wmi_tlv_bcn_tmpl_cmd {
@@ -2054,7 +2054,7 @@ struct wmi_tlv_diag_item {
 	__le16 len;
 	__le32 timestamp;
 	__le32 code;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct wmi_tlv_diag_data_ev {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 2ea77bb880b1..4a3a698fe059 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1694,10 +1694,11 @@ static const struct wmi_peer_flags_map wmi_10_2_peer_flags_map = {
 	.bw160 = WMI_10_2_PEER_160MHZ,
 };
 
-void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
+void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
 				const struct wmi_channel_arg *arg)
 {
 	u32 flags = 0;
+	struct ieee80211_channel *chan = NULL;
 
 	memset(ch, 0, sizeof(*ch));
 
@@ -1714,12 +1715,39 @@ void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
 	if (arg->chan_radar)
 		flags |= WMI_CHAN_FLAG_DFS;
 
+	ch->band_center_freq2 = 0;
 	ch->mhz = __cpu_to_le32(arg->freq);
 	ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1);
-	if (arg->mode == MODE_11AC_VHT80_80)
+	if (arg->mode == MODE_11AC_VHT80_80) {
 		ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq2);
-	else
-		ch->band_center_freq2 = 0;
+		chan = ieee80211_get_channel(ar->hw->wiphy,
+					     arg->band_center_freq2 - 10);
+	}
+
+	if (arg->mode == MODE_11AC_VHT160) {
+		u32 band_center_freq1;
+		u32 band_center_freq2;
+
+		if (arg->freq > arg->band_center_freq1) {
+			band_center_freq1 = arg->band_center_freq1 + 40;
+			band_center_freq2 = arg->band_center_freq1 - 40;
+		} else {
+			band_center_freq1 = arg->band_center_freq1 - 40;
+			band_center_freq2 = arg->band_center_freq1 + 40;
+		}
+
+		ch->band_center_freq1 =
+					__cpu_to_le32(band_center_freq1);
+		/* Minus 10 to get a defined 5G channel frequency*/
+		chan = ieee80211_get_channel(ar->hw->wiphy,
+					     band_center_freq2 - 10);
+		/* The center frequency of the entire VHT160 */
+		ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq1);
+	}
+
+	if (chan && chan->flags & IEEE80211_CHAN_RADAR)
+		flags |= WMI_CHAN_FLAG_DFS_CFREQ2;
+
 	ch->min_power = arg->min_power;
 	ch->max_power = arg->max_power;
 	ch->reg_power = arg->max_reg_power;
@@ -7165,7 +7193,7 @@ ath10k_wmi_op_gen_vdev_start(struct ath10k *ar,
 		memcpy(cmd->ssid.ssid, arg->ssid, arg->ssid_len);
 	}
 
-	ath10k_wmi_put_wmi_channel(&cmd->chan, &arg->channel);
+	ath10k_wmi_put_wmi_channel(ar, &cmd->chan, &arg->channel);
 
 	ath10k_dbg(ar, ATH10K_DBG_WMI,
 		   "wmi vdev %s id 0x%x flags: 0x%0X, freq %d, mode %d, ch_flags: 0x%0X, max_power: %d\n",
@@ -7537,7 +7565,7 @@ ath10k_wmi_op_gen_scan_chan_list(struct ath10k *ar,
 		ch = &arg->channels[i];
 		ci = &cmd->chan_info[i];
 
-		ath10k_wmi_put_wmi_channel(ci, ch);
+		ath10k_wmi_put_wmi_channel(ar, ci, ch);
 	}
 
 	return skb;
@@ -7628,12 +7656,8 @@ ath10k_wmi_peer_assoc_fill_10_4(struct ath10k *ar, void *buf,
 	struct wmi_10_4_peer_assoc_complete_cmd *cmd = buf;
 
 	ath10k_wmi_peer_assoc_fill_10_2(ar, buf, arg);
-	if (arg->peer_bw_rxnss_override)
-		cmd->peer_bw_rxnss_override =
-			__cpu_to_le32((arg->peer_bw_rxnss_override - 1) |
-				      BIT(PEER_BW_RXNSS_OVERRIDE_OFFSET));
-	else
-		cmd->peer_bw_rxnss_override = 0;
+	cmd->peer_bw_rxnss_override =
+		__cpu_to_le32(arg->peer_bw_rxnss_override);
 }
 
 static int
@@ -8945,7 +8969,7 @@ ath10k_wmi_10_4_gen_tdls_peer_update(struct ath10k *ar,
 
 	for (i = 0; i < cap->peer_chan_len; i++) {
 		chan = (struct wmi_channel *)&peer_cap->peer_chan_list[i];
-		ath10k_wmi_put_wmi_channel(chan, &chan_arg[i]);
+		ath10k_wmi_put_wmi_channel(ar, chan, &chan_arg[i]);
 	}
 
 	ath10k_dbg(ar, ATH10K_DBG_WMI,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 6df415778374..c2cecf7253db 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2094,7 +2094,8 @@ enum wmi_channel_change_cause {
 
 /* Indicate reason for channel switch */
 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
-
+/* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
+#define WMI_CHAN_FLAG_DFS_CFREQ2  (1 << 15)
 #define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
 
 /* HT Capabilities*/
@@ -2290,7 +2291,7 @@ struct wmi_service_ready_event {
 	 * where FW can access this memory directly (or) by DMA.
 	 */
 	__le32 num_mem_reqs;
-	struct wlan_host_mem_req mem_reqs[0];
+	struct wlan_host_mem_req mem_reqs[];
 } __packed;
 
 /* This is the definition from 10.X firmware branch */
@@ -2329,7 +2330,7 @@ struct wmi_10x_service_ready_event {
 	 */
 	__le32 num_mem_reqs;
 
-	struct wlan_host_mem_req mem_reqs[0];
+	struct wlan_host_mem_req mem_reqs[];
 } __packed;
 
 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
@@ -3084,19 +3085,19 @@ struct wmi_chan_list_entry {
 struct wmi_chan_list {
 	__le32 tag; /* WMI_CHAN_LIST_TAG */
 	__le32 num_chan;
-	struct wmi_chan_list_entry channel_list[0];
+	struct wmi_chan_list_entry channel_list[];
 } __packed;
 
 struct wmi_bssid_list {
 	__le32 tag; /* WMI_BSSID_LIST_TAG */
 	__le32 num_bssid;
-	struct wmi_mac_addr bssid_list[0];
+	struct wmi_mac_addr bssid_list[];
 } __packed;
 
 struct wmi_ie_data {
 	__le32 tag; /* WMI_IE_TAG */
 	__le32 ie_len;
-	u8 ie_data[0];
+	u8 ie_data[];
 } __packed;
 
 struct wmi_ssid {
@@ -3107,7 +3108,7 @@ struct wmi_ssid {
 struct wmi_ssid_list {
 	__le32 tag; /* WMI_SSID_LIST_TAG */
 	__le32 num_ssids;
-	struct wmi_ssid ssids[0];
+	struct wmi_ssid ssids[];
 } __packed;
 
 /* prefix used by scan requestor ids on the host */
@@ -3309,7 +3310,7 @@ struct wmi_stop_scan_arg {
 
 struct wmi_scan_chan_list_cmd {
 	__le32 num_scan_chans;
-	struct wmi_channel chan_info[0];
+	struct wmi_channel chan_info[];
 } __packed;
 
 struct wmi_scan_chan_list_arg {
@@ -3393,12 +3394,12 @@ struct wmi_mgmt_rx_hdr_v2 {
 
 struct wmi_mgmt_rx_event_v1 {
 	struct wmi_mgmt_rx_hdr_v1 hdr;
-	u8 buf[0];
+	u8 buf[];
 } __packed;
 
 struct wmi_mgmt_rx_event_v2 {
 	struct wmi_mgmt_rx_hdr_v2 hdr;
-	u8 buf[0];
+	u8 buf[];
 } __packed;
 
 struct wmi_10_4_mgmt_rx_hdr {
@@ -3413,7 +3414,7 @@ struct wmi_10_4_mgmt_rx_hdr {
 
 struct wmi_10_4_mgmt_rx_event {
 	struct wmi_10_4_mgmt_rx_hdr hdr;
-	u8 buf[0];
+	u8 buf[];
 } __packed;
 
 struct wmi_mgmt_rx_ext_info {
@@ -3453,14 +3454,14 @@ struct wmi_phyerr {
 	__le32 rssi_chains[4];
 	__le16 nf_chains[4];
 	__le32 buf_len;
-	u8 buf[0];
+	u8 buf[];
 } __packed;
 
 struct wmi_phyerr_event {
 	__le32 num_phyerrs;
 	__le32 tsf_l32;
 	__le32 tsf_u32;
-	struct wmi_phyerr phyerrs[0];
+	struct wmi_phyerr phyerrs[];
 } __packed;
 
 struct wmi_10_4_phyerr_event {
@@ -3477,7 +3478,7 @@ struct wmi_10_4_phyerr_event {
 	__le32 phy_err_mask[2];
 	__le32 tsf_timestamp;
 	__le32 buf_len;
-	u8 buf[0];
+	u8 buf[];
 } __packed;
 
 struct wmi_radar_found_info {
@@ -3590,7 +3591,7 @@ struct wmi_mgmt_tx_hdr {
 
 struct wmi_mgmt_tx_cmd {
 	struct wmi_mgmt_tx_hdr hdr;
-	u8 buf[0];
+	u8 buf[];
 } __packed;
 
 struct wmi_echo_event {
@@ -4618,7 +4619,7 @@ struct wmi_stats_event {
 	 *  By having a zero sized array, the pointer to data area
 	 *  becomes available without increasing the struct size
 	 */
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 struct wmi_10_2_stats_event {
@@ -4628,7 +4629,7 @@ struct wmi_10_2_stats_event {
 	__le32 num_vdev_stats;
 	__le32 num_peer_stats;
 	__le32 num_bcnflt_stats;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /*
@@ -5023,7 +5024,7 @@ struct wmi_vdev_install_key_cmd {
 	__le32 key_rxmic_len;
 
 	/* contains key followed by tx mic followed by rx mic */
-	u8 key_data[0];
+	u8 key_data[];
 } __packed;
 
 struct wmi_vdev_install_key_arg {
@@ -5693,7 +5694,7 @@ struct wmi_bcn_tx_hdr {
 
 struct wmi_bcn_tx_cmd {
 	struct wmi_bcn_tx_hdr hdr;
-	u8 *bcn[0];
+	u8 *bcn[];
 } __packed;
 
 struct wmi_bcn_tx_arg {
@@ -6110,7 +6111,7 @@ struct wmi_bcn_info {
 
 struct wmi_host_swba_event {
 	__le32 vdev_map;
-	struct wmi_bcn_info bcn_info[0];
+	struct wmi_bcn_info bcn_info[];
 } __packed;
 
 struct wmi_10_2_4_bcn_info {
@@ -6120,7 +6121,7 @@ struct wmi_10_2_4_bcn_info {
 
 struct wmi_10_2_4_host_swba_event {
 	__le32 vdev_map;
-	struct wmi_10_2_4_bcn_info bcn_info[0];
+	struct wmi_10_2_4_bcn_info bcn_info[];
 } __packed;
 
 /* 16 words = 512 client + 1 word = for guard */
@@ -6161,7 +6162,7 @@ struct wmi_10_4_bcn_info {
 
 struct wmi_10_4_host_swba_event {
 	__le32 vdev_map;
-	struct wmi_10_4_bcn_info bcn_info[0];
+	struct wmi_10_4_bcn_info bcn_info[];
 } __packed;
 
 #define WMI_MAX_AP_VDEV 16
@@ -6508,7 +6509,10 @@ struct wmi_10_2_peer_assoc_complete_cmd {
 	__le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
 } __packed;
 
-#define PEER_BW_RXNSS_OVERRIDE_OFFSET  31
+/* NSS Mapping to FW */
+#define WMI_PEER_NSS_MAP_ENABLE	BIT(31)
+#define WMI_PEER_NSS_160MHZ_MASK	GENMASK(2, 0)
+#define WMI_PEER_NSS_80_80MHZ_MASK	GENMASK(5, 3)
 
 struct wmi_10_4_peer_assoc_complete_cmd {
 	struct wmi_10_2_peer_assoc_complete_cmd cmd;
@@ -7348,7 +7352,7 @@ void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
 				      const struct wmi_start_scan_arg *arg);
 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
 			      const struct wmi_wmm_params_arg *arg);
-void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
+void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
 				const struct wmi_channel_arg *arg);
 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
 
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 59342d2797ca..3b2b76d602f2 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -788,7 +788,7 @@ static int ath11k_ahb_ext_irq_config(struct ath11k_base *ab)
 			irq = platform_get_irq_byname(ab->pdev,
 						      irq_name[irq_idx]);
 			ab->irq_num[irq_idx] = irq;
-			irq_set_status_flags(irq, IRQ_NOAUTOEN);
+			irq_set_status_flags(irq, IRQ_NOAUTOEN | IRQ_DISABLE_UNLAZY);
 			ret = request_irq(irq, ath11k_ahb_ext_interrupt_handler,
 					  IRQF_TRIGGER_RISING,
 					  irq_name[irq_idx], irq_grp);
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 6e7b8ecd09a6..b4c3e0418eef 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -341,6 +341,11 @@ struct ath11k_sta {
 	u8 rssi_comb;
 	struct ath11k_htt_tx_stats *tx_stats;
 	struct ath11k_rx_peer_stats *rx_stats;
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+	/* protected by conf_mutex */
+	bool aggr_mode;
+#endif
 };
 
 #define ATH11K_NUM_CHANS 41
@@ -650,6 +655,7 @@ struct ath11k_base {
 		/* protected by data_lock */
 		u32 fw_crash_counter;
 	} stats;
+	u32 pktlog_defs_checksum;
 };
 
 struct ath11k_fw_stats_pdev {
diff --git a/drivers/net/wireless/ath/ath11k/debug.h b/drivers/net/wireless/ath/ath11k/debug.h
index 97e7306c506d..70a6dce295b3 100644
--- a/drivers/net/wireless/ath/ath11k/debug.h
+++ b/drivers/net/wireless/ath/ath11k/debug.h
@@ -67,7 +67,7 @@ struct debug_htt_stats_req {
 	u8 peer_addr[ETH_ALEN];
 	struct completion cmpln;
 	u32 buf_len;
-	u8 buf[0];
+	u8 buf[];
 };
 
 struct ath_pktlog_hdr {
@@ -77,7 +77,7 @@ struct ath_pktlog_hdr {
 	u16 size;
 	u32 timestamp;
 	u32 type_specific_data;
-	u8 payload[0];
+	u8 payload[];
 };
 
 #define ATH11K_HTT_STATS_BUF_SIZE (1024 * 512)
@@ -112,6 +112,12 @@ enum ath11k_pktlog_enum {
 	ATH11K_PKTLOG_TYPE_LITE_RX      = 24,
 };
 
+enum ath11k_dbg_aggr_mode {
+	ATH11K_DBG_AGGR_MODE_AUTO,
+	ATH11K_DBG_AGGR_MODE_MANUAL,
+	ATH11K_DBG_AGGR_MODE_MAX,
+};
+
 __printf(2, 3) void ath11k_info(struct ath11k_base *ab, const char *fmt, ...);
 __printf(2, 3) void ath11k_err(struct ath11k_base *ab, const char *fmt, ...);
 __printf(2, 3) void ath11k_warn(struct ath11k_base *ab, const char *fmt, ...);
diff --git a/drivers/net/wireless/ath/ath11k/debug_htt_stats.h b/drivers/net/wireless/ath/ath11k/debug_htt_stats.h
index 23a6baa9e95a..682a6ff222bd 100644
--- a/drivers/net/wireless/ath/ath11k/debug_htt_stats.h
+++ b/drivers/net/wireless/ath/ath11k/debug_htt_stats.h
@@ -239,7 +239,7 @@ struct htt_tx_pdev_stats_tx_ppdu_stats_tlv_v {
  */
 struct htt_tx_pdev_stats_tried_mpdu_cnt_hist_tlv_v {
 	u32 hist_bin_size;
-	u32 tried_mpdu_cnt_hist[0]; /* HTT_TX_PDEV_TRIED_MPDU_CNT_HIST */
+	u32 tried_mpdu_cnt_hist[]; /* HTT_TX_PDEV_TRIED_MPDU_CNT_HIST */
 };
 
 /* == SOC ERROR STATS == */
@@ -550,7 +550,7 @@ struct htt_tx_hwq_stats_cmn_tlv {
 struct htt_tx_hwq_difs_latency_stats_tlv_v {
 	u32 hist_intvl;
 	/* histogram of ppdu post to hwsch - > cmd status received */
-	u32 difs_latency_hist[0]; /* HTT_TX_HWQ_MAX_DIFS_LATENCY_BINS */
+	u32 difs_latency_hist[]; /* HTT_TX_HWQ_MAX_DIFS_LATENCY_BINS */
 };
 
 /* NOTE: Variable length TLV, use length spec to infer array size */
@@ -586,7 +586,7 @@ struct htt_tx_hwq_fes_result_stats_tlv_v {
 struct htt_tx_hwq_tried_mpdu_cnt_hist_tlv_v {
 	u32 hist_bin_size;
 	/* Histogram of number of mpdus on tried mpdu */
-	u32 tried_mpdu_cnt_hist[0]; /* HTT_TX_HWQ_TRIED_MPDU_CNT_HIST */
+	u32 tried_mpdu_cnt_hist[]; /* HTT_TX_HWQ_TRIED_MPDU_CNT_HIST */
 };
 
 /* NOTE: Variable length TLV, use length spec to infer array size
@@ -1584,7 +1584,7 @@ struct htt_pdev_stats_twt_session_tlv {
 struct htt_pdev_stats_twt_sessions_tlv {
 	u32 pdev_id;
 	u32 num_sessions;
-	struct htt_pdev_stats_twt_session_tlv twt_session[0];
+	struct htt_pdev_stats_twt_session_tlv twt_session[];
 };
 
 enum htt_rx_reo_resource_sample_id_enum {
diff --git a/drivers/net/wireless/ath/ath11k/debugfs_sta.c b/drivers/net/wireless/ath/ath11k/debugfs_sta.c
index 389dac219238..68963cfc5097 100644
--- a/drivers/net/wireless/ath/ath11k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath11k/debugfs_sta.c
@@ -533,6 +533,222 @@ static const struct file_operations fops_peer_pktlog = {
 	.llseek = default_llseek,
 };
 
+static ssize_t ath11k_dbg_sta_write_delba(struct file *file,
+					  const char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath11k_sta *arsta = (struct ath11k_sta *)sta->drv_priv;
+	struct ath11k *ar = arsta->arvif->ar;
+	u32 tid, initiator, reason;
+	int ret;
+	char buf[64] = {0};
+
+	ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos,
+				     user_buf, count);
+	if (ret <= 0)
+		return ret;
+
+	ret = sscanf(buf, "%u %u %u", &tid, &initiator, &reason);
+	if (ret != 3)
+		return -EINVAL;
+
+	/* Valid TID values are 0 through 15 */
+	if (tid > HAL_DESC_REO_NON_QOS_TID - 1)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+	if (ar->state != ATH11K_STATE_ON ||
+	    arsta->aggr_mode != ATH11K_DBG_AGGR_MODE_MANUAL) {
+		ret = count;
+		goto out;
+	}
+
+	ret = ath11k_wmi_delba_send(ar, arsta->arvif->vdev_id, sta->addr,
+				    tid, initiator, reason);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to send delba: vdev_id %u peer %pM tid %u initiator %u reason %u\n",
+			    arsta->arvif->vdev_id, sta->addr, tid, initiator,
+			    reason);
+	}
+	ret = count;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static const struct file_operations fops_delba = {
+	.write = ath11k_dbg_sta_write_delba,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+static ssize_t ath11k_dbg_sta_write_addba_resp(struct file *file,
+					       const char __user *user_buf,
+					       size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath11k_sta *arsta = (struct ath11k_sta *)sta->drv_priv;
+	struct ath11k *ar = arsta->arvif->ar;
+	u32 tid, status;
+	int ret;
+	char buf[64] = {0};
+
+	ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos,
+				     user_buf, count);
+	if (ret <= 0)
+		return ret;
+
+	ret = sscanf(buf, "%u %u", &tid, &status);
+	if (ret != 2)
+		return -EINVAL;
+
+	/* Valid TID values are 0 through 15 */
+	if (tid > HAL_DESC_REO_NON_QOS_TID - 1)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+	if (ar->state != ATH11K_STATE_ON ||
+	    arsta->aggr_mode != ATH11K_DBG_AGGR_MODE_MANUAL) {
+		ret = count;
+		goto out;
+	}
+
+	ret = ath11k_wmi_addba_set_resp(ar, arsta->arvif->vdev_id, sta->addr,
+					tid, status);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to send addba response: vdev_id %u peer %pM tid %u status%u\n",
+			    arsta->arvif->vdev_id, sta->addr, tid, status);
+	}
+	ret = count;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static const struct file_operations fops_addba_resp = {
+	.write = ath11k_dbg_sta_write_addba_resp,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+static ssize_t ath11k_dbg_sta_write_addba(struct file *file,
+					  const char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath11k_sta *arsta = (struct ath11k_sta *)sta->drv_priv;
+	struct ath11k *ar = arsta->arvif->ar;
+	u32 tid, buf_size;
+	int ret;
+	char buf[64] = {0};
+
+	ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos,
+				     user_buf, count);
+	if (ret <= 0)
+		return ret;
+
+	ret = sscanf(buf, "%u %u", &tid, &buf_size);
+	if (ret != 2)
+		return -EINVAL;
+
+	/* Valid TID values are 0 through 15 */
+	if (tid > HAL_DESC_REO_NON_QOS_TID - 1)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+	if (ar->state != ATH11K_STATE_ON ||
+	    arsta->aggr_mode != ATH11K_DBG_AGGR_MODE_MANUAL) {
+		ret = count;
+		goto out;
+	}
+
+	ret = ath11k_wmi_addba_send(ar, arsta->arvif->vdev_id, sta->addr,
+				    tid, buf_size);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to send addba request: vdev_id %u peer %pM tid %u buf_size %u\n",
+			    arsta->arvif->vdev_id, sta->addr, tid, buf_size);
+	}
+
+	ret = count;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static const struct file_operations fops_addba = {
+	.write = ath11k_dbg_sta_write_addba,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+static ssize_t ath11k_dbg_sta_read_aggr_mode(struct file *file,
+					     char __user *user_buf,
+					     size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath11k_sta *arsta = (struct ath11k_sta *)sta->drv_priv;
+	struct ath11k *ar = arsta->arvif->ar;
+	char buf[64];
+	int len = 0;
+
+	mutex_lock(&ar->conf_mutex);
+	len = scnprintf(buf, sizeof(buf) - len,
+			"aggregation mode: %s\n\n%s\n%s\n",
+			(arsta->aggr_mode == ATH11K_DBG_AGGR_MODE_AUTO) ?
+			"auto" : "manual", "auto = 0", "manual = 1");
+	mutex_unlock(&ar->conf_mutex);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath11k_dbg_sta_write_aggr_mode(struct file *file,
+					      const char __user *user_buf,
+					      size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath11k_sta *arsta = (struct ath11k_sta *)sta->drv_priv;
+	struct ath11k *ar = arsta->arvif->ar;
+	u32 aggr_mode;
+	int ret;
+
+	if (kstrtouint_from_user(user_buf, count, 0, &aggr_mode))
+		return -EINVAL;
+
+	if (aggr_mode >= ATH11K_DBG_AGGR_MODE_MAX)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+	if (ar->state != ATH11K_STATE_ON ||
+	    aggr_mode == arsta->aggr_mode) {
+		ret = count;
+		goto out;
+	}
+
+	ret = ath11k_wmi_addba_clear_resp(ar, arsta->arvif->vdev_id, sta->addr);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to clear addba session ret: %d\n",
+			    ret);
+		goto out;
+	}
+
+	arsta->aggr_mode = aggr_mode;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static const struct file_operations fops_aggr_mode = {
+	.read = ath11k_dbg_sta_read_aggr_mode,
+	.write = ath11k_dbg_sta_write_aggr_mode,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 void ath11k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta, struct dentry *dir)
 {
@@ -550,4 +766,9 @@ void ath11k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 
 	debugfs_create_file("peer_pktlog", 0644, dir, sta,
 			    &fops_peer_pktlog);
+
+	debugfs_create_file("aggr_mode", 0644, dir, sta, &fops_aggr_mode);
+	debugfs_create_file("addba", 0200, dir, sta, &fops_addba);
+	debugfs_create_file("addba_resp", 0200, dir, sta, &fops_addba_resp);
+	debugfs_create_file("delba", 0200, dir, sta, &fops_delba);
 }
diff --git a/drivers/net/wireless/ath/ath11k/dp.h b/drivers/net/wireless/ath/ath11k/dp.h
index 551f9c9fb847..d4e19dc4bce1 100644
--- a/drivers/net/wireless/ath/ath11k/dp.h
+++ b/drivers/net/wireless/ath/ath11k/dp.h
@@ -169,8 +169,8 @@ struct ath11k_pdev_dp {
 
 #define DP_WBM_RELEASE_RING_SIZE	64
 #define DP_TCL_DATA_RING_SIZE		512
-#define DP_TX_COMP_RING_SIZE		8192
-#define DP_TX_IDR_SIZE			(DP_TX_COMP_RING_SIZE << 1)
+#define DP_TX_COMP_RING_SIZE		32768
+#define DP_TX_IDR_SIZE			DP_TX_COMP_RING_SIZE
 #define DP_TCL_CMD_RING_SIZE		32
 #define DP_TCL_STATUS_RING_SIZE		32
 #define DP_REO_DST_RING_MAX		4
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index f74a0e74bf3e..203fd44ff352 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -1491,7 +1491,8 @@ static void ath11k_htt_pktlog(struct ath11k_base *ab, struct sk_buff *skb)
 		return;
 	}
 
-	trace_ath11k_htt_pktlog(ar, data->payload, hdr->size);
+	trace_ath11k_htt_pktlog(ar, data->payload, hdr->size,
+				ar->ab->pktlog_defs_checksum);
 }
 
 static void ath11k_htt_backpressure_event_handler(struct ath11k_base *ab,
@@ -2402,12 +2403,12 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
 
 try_again:
 	while ((rx_desc = ath11k_hal_srng_dst_get_next_entry(ab, srng))) {
-		struct hal_reo_dest_ring *desc = (struct hal_reo_dest_ring *)rx_desc;
+		struct hal_reo_dest_ring desc = *(struct hal_reo_dest_ring *)rx_desc;
 		enum hal_reo_dest_ring_push_reason push_reason;
 		u32 cookie;
 
 		cookie = FIELD_GET(BUFFER_ADDR_INFO1_SW_COOKIE,
-				   desc->buf_addr_info.info1);
+				   desc.buf_addr_info.info1);
 		buf_id = FIELD_GET(DP_RXDMA_BUF_COOKIE_BUF_ID,
 				   cookie);
 		mac_id = FIELD_GET(DP_RXDMA_BUF_COOKIE_PDEV_ID, cookie);
@@ -2435,7 +2436,7 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
 		total_msdu_reaped++;
 
 		push_reason = FIELD_GET(HAL_REO_DEST_RING_INFO0_PUSH_REASON,
-					desc->info0);
+					desc.info0);
 		if (push_reason !=
 		    HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION) {
 			dev_kfree_skb_any(msdu);
@@ -2443,15 +2444,15 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
 			continue;
 		}
 
-		rxcb->is_first_msdu = !!(desc->rx_msdu_info.info0 &
+		rxcb->is_first_msdu = !!(desc.rx_msdu_info.info0 &
 					 RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU);
-		rxcb->is_last_msdu = !!(desc->rx_msdu_info.info0 &
+		rxcb->is_last_msdu = !!(desc.rx_msdu_info.info0 &
 					RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU);
-		rxcb->is_continuation = !!(desc->rx_msdu_info.info0 &
+		rxcb->is_continuation = !!(desc.rx_msdu_info.info0 &
 					   RX_MSDU_DESC_INFO0_MSDU_CONTINUATION);
 		rxcb->mac_id = mac_id;
 		rxcb->tid = FIELD_GET(HAL_REO_DEST_RING_INFO0_RX_QUEUE_NUM,
-				      desc->info0);
+				      desc.info0);
 
 		__skb_queue_tail(&msdu_list, msdu);
 
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index 7722822a0456..780a3e11b609 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -599,7 +599,7 @@ struct hal_srng {
 /* Interrupt mitigation - timer threshold in us */
 #define HAL_SRNG_INT_TIMER_THRESHOLD_TX 1000
 #define HAL_SRNG_INT_TIMER_THRESHOLD_RX 500
-#define HAL_SRNG_INT_TIMER_THRESHOLD_OTHER 1000
+#define HAL_SRNG_INT_TIMER_THRESHOLD_OTHER 256
 
 /* HW SRNG configuration table */
 struct hal_srng_config {
diff --git a/drivers/net/wireless/ath/ath11k/hal_desc.h b/drivers/net/wireless/ath/ath11k/hal_desc.h
index 5e200380cca4..a1f747c1c44d 100644
--- a/drivers/net/wireless/ath/ath11k/hal_desc.h
+++ b/drivers/net/wireless/ath/ath11k/hal_desc.h
@@ -477,7 +477,7 @@ enum hal_tlv_tag {
 
 struct hal_tlv_hdr {
 	u32 tl;
-	u8 value[0];
+	u8 value[];
 } __packed;
 
 #define RX_MPDU_DESC_INFO0_MSDU_COUNT		GENMASK(7, 0)
@@ -1972,7 +1972,7 @@ struct hal_rx_reo_queue {
 	u32 processed_total_bytes;
 	u32 info5;
 	u32 rsvd[3];
-	struct hal_rx_reo_queue_ext ext_desc[0];
+	struct hal_rx_reo_queue_ext ext_desc[];
 } __packed;
 
 /* hal_rx_reo_queue
diff --git a/drivers/net/wireless/ath/ath11k/hal_rx.h b/drivers/net/wireless/ath/ath11k/hal_rx.h
index e863e4abfcc1..c436191ae1e8 100644
--- a/drivers/net/wireless/ath/ath11k/hal_rx.h
+++ b/drivers/net/wireless/ath/ath11k/hal_rx.h
@@ -23,7 +23,7 @@ struct hal_rx_wbm_rel_info {
 
 struct hal_rx_mon_status_tlv_hdr {
 	u32 hdr;
-	u8 value[0];
+	u8 value[];
 };
 
 enum hal_rx_su_mu_coding {
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 9973477ae373..cdec95644758 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -111,7 +111,7 @@ struct ath11k_hw_params {
 struct ath11k_fw_ie {
 	__le32 id;
 	__le32 len;
-	u8 data[0];
+	u8 data[];
 };
 
 enum ath11k_bd_ie_board_type {
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 9f8bc19cc5ae..06d063274eea 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1168,8 +1168,7 @@ static void ath11k_peer_assoc_h_he(struct ath11k *ar,
 	       sizeof(arg->peer_he_cap_macinfo));
 	memcpy(&arg->peer_he_cap_phyinfo, he_cap->he_cap_elem.phy_cap_info,
 	       sizeof(arg->peer_he_cap_phyinfo));
-	memcpy(&arg->peer_he_ops, &vif->bss_conf.he_operation,
-	       sizeof(arg->peer_he_ops));
+	arg->peer_he_ops = vif->bss_conf.he_oper.params;
 
 	/* the top most byte is used to indicate BSS color info */
 	arg->peer_he_ops &= 0xffffff;
diff --git a/drivers/net/wireless/ath/ath11k/peer.c b/drivers/net/wireless/ath/ath11k/peer.c
index f43deacc01bd..297172538620 100644
--- a/drivers/net/wireless/ath/ath11k/peer.c
+++ b/drivers/net/wireless/ath/ath11k/peer.c
@@ -17,7 +17,26 @@ struct ath11k_peer *ath11k_peer_find(struct ath11k_base *ab, int vdev_id,
 	list_for_each_entry(peer, &ab->peers, list) {
 		if (peer->vdev_id != vdev_id)
 			continue;
-		if (memcmp(peer->addr, addr, ETH_ALEN))
+		if (!ether_addr_equal(peer->addr, addr))
+			continue;
+
+		return peer;
+	}
+
+	return NULL;
+}
+
+static struct ath11k_peer *ath11k_peer_find_by_pdev_idx(struct ath11k_base *ab,
+							u8 pdev_idx, const u8 *addr)
+{
+	struct ath11k_peer *peer;
+
+	lockdep_assert_held(&ab->base_lock);
+
+	list_for_each_entry(peer, &ab->peers, list) {
+		if (peer->pdev_idx != pdev_idx)
+			continue;
+		if (!ether_addr_equal(peer->addr, addr))
 			continue;
 
 		return peer;
@@ -34,7 +53,7 @@ struct ath11k_peer *ath11k_peer_find_by_addr(struct ath11k_base *ab,
 	lockdep_assert_held(&ab->base_lock);
 
 	list_for_each_entry(peer, &ab->peers, list) {
-		if (memcmp(peer->addr, addr, ETH_ALEN))
+		if (!ether_addr_equal(peer->addr, addr))
 			continue;
 
 		return peer;
@@ -200,6 +219,17 @@ int ath11k_peer_create(struct ath11k *ar, struct ath11k_vif *arvif,
 		return -ENOBUFS;
 	}
 
+	spin_lock_bh(&ar->ab->base_lock);
+	peer = ath11k_peer_find_by_pdev_idx(ar->ab, ar->pdev_idx, param->peer_addr);
+	if (peer) {
+		spin_unlock_bh(&ar->ab->base_lock);
+		ath11k_info(ar->ab,
+			    "ignoring the peer %pM creation on same pdev idx %d\n",
+			    param->peer_addr, ar->pdev_idx);
+		return -EINVAL;
+	}
+	spin_unlock_bh(&ar->ab->base_lock);
+
 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
 	if (ret) {
 		ath11k_warn(ar->ab,
@@ -225,6 +255,7 @@ int ath11k_peer_create(struct ath11k *ar, struct ath11k_vif *arvif,
 		return -ENOENT;
 	}
 
+	peer->pdev_idx = ar->pdev_idx;
 	peer->sta = sta;
 	arvif->ast_hash = peer->ast_hash;
 
diff --git a/drivers/net/wireless/ath/ath11k/peer.h b/drivers/net/wireless/ath/ath11k/peer.h
index ccca1523a6ea..5d125ce8984e 100644
--- a/drivers/net/wireless/ath/ath11k/peer.h
+++ b/drivers/net/wireless/ath/ath11k/peer.h
@@ -13,6 +13,7 @@ struct ath11k_peer {
 	u8 addr[ETH_ALEN];
 	int peer_id;
 	u16 ast_hash;
+	u8 pdev_idx;
 
 	/* protected by ab->data_lock */
 	struct ieee80211_key_conf *keys[WMI_MAX_KEY_INDEX + 1];
diff --git a/drivers/net/wireless/ath/ath11k/trace.h b/drivers/net/wireless/ath/ath11k/trace.h
index 8700a622be7b..66d0aae7816c 100644
--- a/drivers/net/wireless/ath/ath11k/trace.h
+++ b/drivers/net/wireless/ath/ath11k/trace.h
@@ -21,14 +21,16 @@ static inline void trace_ ## name(proto) {}
 #define TRACE_SYSTEM ath11k
 
 TRACE_EVENT(ath11k_htt_pktlog,
-	    TP_PROTO(struct ath11k *ar, const void *buf, u16 buf_len),
+	    TP_PROTO(struct ath11k *ar, const void *buf, u16 buf_len,
+		     u32 pktlog_checksum),
 
-	TP_ARGS(ar, buf, buf_len),
+	TP_ARGS(ar, buf, buf_len, pktlog_checksum),
 
 	TP_STRUCT__entry(
 		__string(device, dev_name(ar->ab->dev))
 		__string(driver, dev_driver_string(ar->ab->dev))
 		__field(u16, buf_len)
+		__field(u32, pktlog_checksum)
 		__dynamic_array(u8, pktlog, buf_len)
 	),
 
@@ -36,14 +38,16 @@ TRACE_EVENT(ath11k_htt_pktlog,
 		__assign_str(device, dev_name(ar->ab->dev));
 		__assign_str(driver, dev_driver_string(ar->ab->dev));
 		__entry->buf_len = buf_len;
+		__entry->pktlog_checksum = pktlog_checksum;
 		memcpy(__get_dynamic_array(pktlog), buf, buf_len);
 	),
 
 	TP_printk(
-		"%s %s size %hu",
+		"%s %s size %hu pktlog_checksum %d",
 		__get_str(driver),
 		__get_str(device),
-		__entry->buf_len
+		__entry->buf_len,
+		__entry->pktlog_checksum
 	 )
 );
 
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index e7ce36966d6a..c2a972377687 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -87,8 +87,8 @@ static const struct wmi_tlv_policy wmi_tlv_policies[] = {
 		= { .min_len = sizeof(struct wmi_pdev_bss_chan_info_event) },
 	[WMI_TAG_VDEV_INSTALL_KEY_COMPLETE_EVENT]
 		= { .min_len = sizeof(struct wmi_vdev_install_key_compl_event) },
-	[WMI_TAG_READY_EVENT]
-		= {.min_len = sizeof(struct wmi_ready_event) },
+	[WMI_TAG_READY_EVENT] = {
+		.min_len = sizeof(struct wmi_ready_event_min) },
 	[WMI_TAG_SERVICE_AVAILABLE_EVENT]
 		= {.min_len = sizeof(struct wmi_service_available_event) },
 	[WMI_TAG_PEER_ASSOC_CONF_EVENT]
@@ -2368,6 +2368,146 @@ int ath11k_wmi_send_dfs_phyerr_offload_enable_cmd(struct ath11k *ar,
 	return ret;
 }
 
+int ath11k_wmi_delba_send(struct ath11k *ar, u32 vdev_id, const u8 *mac,
+			  u32 tid, u32 initiator, u32 reason)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_delba_send_cmd *cmd;
+	struct sk_buff *skb;
+	int ret;
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_delba_send_cmd *)skb->data;
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_DELBA_SEND_CMD) |
+			FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+	cmd->vdev_id = vdev_id;
+	ether_addr_copy(cmd->peer_macaddr.addr, mac);
+	cmd->tid = tid;
+	cmd->initiator = initiator;
+	cmd->reasoncode = reason;
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "wmi delba send vdev_id 0x%X mac_addr %pM tid %u initiator %u reason %u\n",
+		   vdev_id, mac, tid, initiator, reason);
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_DELBA_SEND_CMDID);
+
+	if (ret) {
+		ath11k_warn(ar->ab,
+			    "failed to send WMI_DELBA_SEND_CMDID cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	return ret;
+}
+
+int ath11k_wmi_addba_set_resp(struct ath11k *ar, u32 vdev_id, const u8 *mac,
+			      u32 tid, u32 status)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_addba_setresponse_cmd *cmd;
+	struct sk_buff *skb;
+	int ret;
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_addba_setresponse_cmd *)skb->data;
+	cmd->tlv_header =
+		FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ADDBA_SETRESPONSE_CMD) |
+		FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+	cmd->vdev_id = vdev_id;
+	ether_addr_copy(cmd->peer_macaddr.addr, mac);
+	cmd->tid = tid;
+	cmd->statuscode = status;
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "wmi addba set resp vdev_id 0x%X mac_addr %pM tid %u status %u\n",
+		   vdev_id, mac, tid, status);
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_ADDBA_SET_RESP_CMDID);
+
+	if (ret) {
+		ath11k_warn(ar->ab,
+			    "failed to send WMI_ADDBA_SET_RESP_CMDID cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	return ret;
+}
+
+int ath11k_wmi_addba_send(struct ath11k *ar, u32 vdev_id, const u8 *mac,
+			  u32 tid, u32 buf_size)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_addba_send_cmd *cmd;
+	struct sk_buff *skb;
+	int ret;
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_addba_send_cmd *)skb->data;
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ADDBA_SEND_CMD) |
+		FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+	cmd->vdev_id = vdev_id;
+	ether_addr_copy(cmd->peer_macaddr.addr, mac);
+	cmd->tid = tid;
+	cmd->buffersize = buf_size;
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "wmi addba send vdev_id 0x%X mac_addr %pM tid %u bufsize %u\n",
+		   vdev_id, mac, tid, buf_size);
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_ADDBA_SEND_CMDID);
+
+	if (ret) {
+		ath11k_warn(ar->ab,
+			    "failed to send WMI_ADDBA_SEND_CMDID cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	return ret;
+}
+
+int ath11k_wmi_addba_clear_resp(struct ath11k *ar, u32 vdev_id, const u8 *mac)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_addba_clear_resp_cmd *cmd;
+	struct sk_buff *skb;
+	int ret;
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_addba_clear_resp_cmd *)skb->data;
+	cmd->tlv_header =
+		FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ADDBA_CLEAR_RESP_CMD) |
+		FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+	cmd->vdev_id = vdev_id;
+	ether_addr_copy(cmd->peer_macaddr.addr, mac);
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "wmi addba clear resp vdev_id 0x%X mac_addr %pM\n",
+		   vdev_id, mac);
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_ADDBA_CLEAR_RESP_CMDID);
+
+	if (ret) {
+		ath11k_warn(ar->ab,
+			    "failed to send WMI_ADDBA_CLEAR_RESP_CMDID cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	return ret;
+}
+
 int ath11k_wmi_pdev_peer_pktlog_filter(struct ath11k *ar, u8 *addr, u8 enable)
 {
 	struct ath11k_pdev_wmi *wmi = ar->wmi;
@@ -2779,7 +2919,7 @@ int ath11k_wmi_send_bss_color_change_enable_cmd(struct ath11k *ar, u32 vdev_id,
 	ret = ath11k_wmi_cmd_send(wmi, skb,
 				  WMI_BSS_COLOR_CHANGE_ENABLE_CMDID);
 	if (ret) {
-		ath11k_warn(ab, "Failed to send WMI_TWT_DIeABLE_CMDID");
+		ath11k_warn(ab, "Failed to send WMI_BSS_COLOR_CHANGE_ENABLE_CMDID");
 		dev_kfree_skb(skb);
 	}
 	return ret;
@@ -3105,7 +3245,7 @@ int ath11k_wmi_cmd_init(struct ath11k_base *ab)
 	config.beacon_tx_offload_max_vdev = ab->num_radios * TARGET_MAX_BCN_OFFLD;
 	config.rx_batchmode = TARGET_RX_BATCHMODE;
 	config.peer_map_unmap_v2_support = 1;
-	config.twt_ap_pdev_count = 2;
+	config.twt_ap_pdev_count = ab->num_radios;
 	config.twt_ap_sta_count = 1000;
 
 	memcpy(&wmi_sc->wlan_resource_config, &config, sizeof(config));
@@ -3740,8 +3880,9 @@ static int wmi_process_mgmt_tx_comp(struct ath11k *ar, u32 desc_id,
 
 	ieee80211_tx_status_irqsafe(ar->hw, msdu);
 
-	WARN_ON_ONCE(atomic_read(&ar->num_pending_mgmt_tx) == 0);
-	atomic_dec(&ar->num_pending_mgmt_tx);
+	/* WARN when we received this event without doing any mgmt tx */
+	if (atomic_dec_if_positive(&ar->num_pending_mgmt_tx) < 0)
+		WARN_ON_ONCE(1);
 
 	return 0;
 }
@@ -4851,7 +4992,7 @@ static int ath11k_wmi_tlv_rdy_parse(struct ath11k_base *ab, u16 tag, u16 len,
 				    const void *ptr, void *data)
 {
 	struct wmi_tlv_rdy_parse *rdy_parse = data;
-	struct wmi_ready_event *fixed_param;
+	struct wmi_ready_event fixed_param;
 	struct wmi_mac_addr *addr_list;
 	struct ath11k_pdev *pdev;
 	u32 num_mac_addr;
@@ -4859,11 +5000,16 @@ static int ath11k_wmi_tlv_rdy_parse(struct ath11k_base *ab, u16 tag, u16 len,
 
 	switch (tag) {
 	case WMI_TAG_READY_EVENT:
-		fixed_param = (struct wmi_ready_event *)ptr;
-		ab->wlan_init_status = fixed_param->status;
-		rdy_parse->num_extra_mac_addr = fixed_param->num_extra_mac_addr;
-
-		ether_addr_copy(ab->mac_addr, fixed_param->mac_addr.addr);
+		memset(&fixed_param, 0, sizeof(fixed_param));
+		memcpy(&fixed_param, (struct wmi_ready_event *)ptr,
+		       min_t(u16, sizeof(fixed_param), len));
+		ab->wlan_init_status = fixed_param.ready_event_min.status;
+		rdy_parse->num_extra_mac_addr =
+			fixed_param.ready_event_min.num_extra_mac_addr;
+
+		ether_addr_copy(ab->mac_addr,
+				fixed_param.ready_event_min.mac_addr.addr);
+		ab->pktlog_defs_checksum = fixed_param.pktlog_defs_checksum;
 		ab->wmi_ready = true;
 		break;
 	case WMI_TAG_ARRAY_FIXED_STRUCT:
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 510f9c6bc1d7..39f0a5e30c25 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -39,7 +39,7 @@ struct wmi_cmd_hdr {
 
 struct wmi_tlv {
 	u32 header;
-	u8 value[0];
+	u8 value[];
 } __packed;
 
 #define WMI_TLV_LEN	GENMASK(15, 0)
@@ -2345,7 +2345,7 @@ struct wmi_mac_addr {
 	} __packed;
 } __packed;
 
-struct wmi_ready_event {
+struct wmi_ready_event_min {
 	struct wmi_abi_version fw_abi_vers;
 	struct wmi_mac_addr mac_addr;
 	u32 status;
@@ -2355,6 +2355,12 @@ struct wmi_ready_event {
 	u32 num_extra_peers;
 } __packed;
 
+struct wmi_ready_event {
+	struct wmi_ready_event_min ready_event_min;
+	u32 max_ast_index;
+	u32 pktlog_defs_checksum;
+} __packed;
+
 struct wmi_service_available_event {
 	u32 wmi_service_segment_offset;
 	u32 wmi_service_segment_bitmap[WMI_SERVICE_SEGMENT_BM_SIZE32];
@@ -3649,6 +3655,37 @@ struct wmi_therm_throt_level_config_info {
 	u32 prio;
 } __packed;
 
+struct wmi_delba_send_cmd {
+	u32 tlv_header;
+	u32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	u32 tid;
+	u32 initiator;
+	u32 reasoncode;
+} __packed;
+
+struct wmi_addba_setresponse_cmd {
+	u32 tlv_header;
+	u32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	u32 tid;
+	u32 statuscode;
+} __packed;
+
+struct wmi_addba_send_cmd {
+	u32 tlv_header;
+	u32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	u32 tid;
+	u32 buffersize;
+} __packed;
+
+struct wmi_addba_clear_resp_cmd {
+	u32 tlv_header;
+	u32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+} __packed;
+
 struct wmi_pdev_pktlog_filter_info {
 	u32 tlv_header;
 	struct wmi_mac_addr peer_macaddr;
@@ -4822,6 +4859,13 @@ int ath11k_wmi_send_scan_chan_list_cmd(struct ath11k *ar,
 				       struct scan_chan_list_params *chan_list);
 int ath11k_wmi_send_dfs_phyerr_offload_enable_cmd(struct ath11k *ar,
 						  u32 pdev_id);
+int ath11k_wmi_addba_clear_resp(struct ath11k *ar, u32 vdev_id, const u8 *mac);
+int ath11k_wmi_addba_send(struct ath11k *ar, u32 vdev_id, const u8 *mac,
+			  u32 tid, u32 buf_size);
+int ath11k_wmi_addba_set_resp(struct ath11k *ar, u32 vdev_id, const u8 *mac,
+			      u32 tid, u32 status);
+int ath11k_wmi_delba_send(struct ath11k *ar, u32 vdev_id, const u8 *mac,
+			  u32 tid, u32 initiator, u32 reason);
 int ath11k_wmi_send_bcn_offload_control_cmd(struct ath11k *ar,
 					    u32 vdev_id, u32 bcn_ctrl_op);
 int
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 37cf602d8adf..67f8f2aa7a53 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3249,22 +3249,19 @@ static int ath6kl_get_antenna(struct wiphy *wiphy,
 	return 0;
 }
 
-static void ath6kl_mgmt_frame_register(struct wiphy *wiphy,
-				       struct wireless_dev *wdev,
-				       u16 frame_type, bool reg)
+static void ath6kl_update_mgmt_frame_registrations(struct wiphy *wiphy,
+						   struct wireless_dev *wdev,
+						   struct mgmt_frame_regs *upd)
 {
 	struct ath6kl_vif *vif = ath6kl_vif_from_wdev(wdev);
 
-	ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: frame_type=0x%x reg=%d\n",
-		   __func__, frame_type, reg);
-	if (frame_type == IEEE80211_STYPE_PROBE_REQ) {
-		/*
-		 * Note: This notification callback is not allowed to sleep, so
-		 * we cannot send WMI_PROBE_REQ_REPORT_CMD here. Instead, we
-		 * hardcode target to report Probe Request frames all the time.
-		 */
-		vif->probe_req_report = reg;
-	}
+	/*
+	 * FIXME: send WMI_PROBE_REQ_REPORT_CMD here instead of hardcoding
+	 *	  the reporting in the target all the time, this callback
+	 *	  *is* allowed to sleep after all.
+	 */
+	vif->probe_req_report =
+		upd->interface_stypes & BIT(IEEE80211_STYPE_PROBE_REQ >> 4);
 }
 
 static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
@@ -3464,7 +3461,8 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = {
 	.remain_on_channel = ath6kl_remain_on_channel,
 	.cancel_remain_on_channel = ath6kl_cancel_remain_on_channel,
 	.mgmt_tx = ath6kl_mgmt_tx,
-	.mgmt_frame_register = ath6kl_mgmt_frame_register,
+	.update_mgmt_frame_registrations =
+		ath6kl_update_mgmt_frame_registrations,
 	.get_antenna = ath6kl_get_antenna,
 	.sched_scan_start = ath6kl_cfg80211_sscan_start,
 	.sched_scan_stop = ath6kl_cfg80211_sscan_stop,
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 0d30e762c090..77e052336eb5 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -160,7 +160,7 @@ enum ath6kl_fw_capability {
 struct ath6kl_fw_ie {
 	__le32 id;
 	__le32 len;
-	u8 data[0];
+	u8 data[];
 };
 
 enum ath6kl_hw_flags {
@@ -406,7 +406,7 @@ struct ath6kl_mgmt_buff {
 	u32 id;
 	bool no_cck;
 	size_t len;
-	u8 buf[0];
+	u8 buf[];
 };
 
 struct ath6kl_sta {
diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c
index 54337d60f288..7506cea46f58 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.c
+++ b/drivers/net/wireless/ath/ath6kl/debug.c
@@ -30,7 +30,7 @@ struct ath6kl_fwlog_slot {
 	__le32 length;
 
 	/* max ATH6KL_FWLOG_PAYLOAD_SIZE bytes */
-	u8 payload[0];
+	u8 payload[];
 };
 
 #define ATH6KL_FWLOG_MAX_ENTRIES 20
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..aea7fea2a81e 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -199,7 +199,7 @@ struct hif_scatter_req {
 
 	u32 scat_q_depth;
 
-	struct hif_scatter_item scat_list[0];
+	struct hif_scatter_item scat_list[];
 };
 
 struct ath6kl_irq_proc_registers {
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index dd0c32379375..4ed21dad6a8e 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -612,6 +612,11 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 			hif_dev->remain_skb = nskb;
 			spin_unlock(&hif_dev->rx_lock);
 		} else {
+			if (pool_index == MAX_PKT_NUM_IN_TRANSFER) {
+				dev_err(&hif_dev->udev->dev,
+					"ath9k_htc: over RX MAX_PKT_NUM\n");
+				goto err;
+			}
 			nskb = __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC);
 			if (!nskb) {
 				dev_err(&hif_dev->udev->dev,
@@ -638,9 +643,9 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 
 static void ath9k_hif_usb_rx_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	int ret;
 
 	if (!skb)
@@ -680,14 +685,15 @@ static void ath9k_hif_usb_rx_cb(struct urb *urb)
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 }
 
 static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	struct sk_buff *nskb;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 	int ret;
 
 	if (!skb)
@@ -745,6 +751,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 	urb->context = NULL;
 }
 
@@ -790,7 +797,7 @@ static int ath9k_hif_usb_alloc_tx_urbs(struct hif_device_usb *hif_dev)
 	init_usb_anchor(&hif_dev->mgmt_submitted);
 
 	for (i = 0; i < MAX_TX_URB_NUM; i++) {
-		tx_buf = kzalloc(sizeof(struct tx_buf), GFP_KERNEL);
+		tx_buf = kzalloc(sizeof(*tx_buf), GFP_KERNEL);
 		if (!tx_buf)
 			goto err;
 
@@ -827,8 +834,9 @@ static void ath9k_hif_usb_dealloc_rx_urbs(struct hif_device_usb *hif_dev)
 
 static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->rx_submitted);
@@ -836,6 +844,12 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 
 	for (i = 0; i < MAX_RX_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -850,11 +864,14 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_bulk_urb(urb, hif_dev->udev,
 				  usb_rcvbulkpipe(hif_dev->udev,
 						  USB_WLAN_RX_PIPE),
 				  skb->data, MAX_RX_BUF_SIZE,
-				  ath9k_hif_usb_rx_cb, skb);
+				  ath9k_hif_usb_rx_cb, rx_buf);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->rx_submitted);
@@ -880,6 +897,8 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
 	return ret;
 }
@@ -891,14 +910,21 @@ static void ath9k_hif_usb_dealloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 
 static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->reg_in_submitted);
 
 	for (i = 0; i < MAX_REG_IN_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -913,11 +939,14 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_int_urb(urb, hif_dev->udev,
 				  usb_rcvintpipe(hif_dev->udev,
 						  USB_REG_IN_PIPE),
 				  skb->data, MAX_REG_IN_BUF_SIZE,
-				  ath9k_hif_usb_reg_in_cb, skb, 1);
+				  ath9k_hif_usb_reg_in_cb, rx_buf, 1);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
@@ -943,6 +972,8 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
 	return ret;
 }
@@ -973,7 +1004,7 @@ static int ath9k_hif_usb_alloc_urbs(struct hif_device_usb *hif_dev)
 	return -ENOMEM;
 }
 
-static void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
+void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
 {
 	usb_kill_anchored_urbs(&hif_dev->regout_submitted);
 	ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
@@ -1341,8 +1372,9 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
 
 	if (hif_dev->flags & HIF_USB_READY) {
 		ath9k_htc_hw_deinit(hif_dev->htc_handle, unplugged);
-		ath9k_htc_hw_free(hif_dev->htc_handle);
 		ath9k_hif_usb_dev_deinit(hif_dev);
+		ath9k_destoy_wmi(hif_dev->htc_handle->drv_priv);
+		ath9k_htc_hw_free(hif_dev->htc_handle);
 	}
 
 	usb_set_intfdata(interface, NULL);
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index 7846916aa01d..5985aa15ca93 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -86,6 +86,11 @@ struct tx_buf {
 	struct list_head list;
 };
 
+struct rx_buf {
+	struct sk_buff *skb;
+	struct hif_device_usb *hif_dev;
+};
+
 #define HIF_USB_TX_STOP  BIT(0)
 #define HIF_USB_TX_FLUSH BIT(1)
 
@@ -133,5 +138,6 @@ struct hif_device_usb {
 
 int ath9k_hif_usb_init(void);
 void ath9k_hif_usb_exit(void);
+void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev);
 
 #endif /* HTC_USB_H */
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index d961095ab01f..40a065028ebe 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -931,8 +931,9 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv,
 int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 			   u16 devid, char *product, u32 drv_info)
 {
-	struct ieee80211_hw *hw;
+	struct hif_device_usb *hif_dev;
 	struct ath9k_htc_priv *priv;
+	struct ieee80211_hw *hw;
 	int ret;
 
 	hw = ieee80211_alloc_hw(sizeof(struct ath9k_htc_priv), &ath9k_htc_ops);
@@ -967,7 +968,10 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 	return 0;
 
 err_init:
-	ath9k_deinit_wmi(priv);
+	ath9k_stop_wmi(priv);
+	hif_dev = (struct hif_device_usb *)htc_handle->hif_dev;
+	ath9k_hif_usb_dealloc_urbs(hif_dev);
+	ath9k_destoy_wmi(priv);
 err_free:
 	ieee80211_free_hw(hw);
 	return ret;
@@ -982,7 +986,7 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug)
 			htc_handle->drv_priv->ah->ah_flags |= AH_UNPLUGGED;
 
 		ath9k_deinit_device(htc_handle->drv_priv);
-		ath9k_deinit_wmi(htc_handle->drv_priv);
+		ath9k_stop_wmi(htc_handle->drv_priv);
 		ieee80211_free_hw(htc_handle->drv_priv->hw);
 	}
 }
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index d091c8ebdcf0..d2e062eaf561 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -113,6 +113,9 @@ static void htc_process_conn_rsp(struct htc_target *target,
 
 	if (svc_rspmsg->status == HTC_SERVICE_SUCCESS) {
 		epid = svc_rspmsg->endpoint_id;
+		if (epid < 0 || epid >= ENDPOINT_MAX)
+			return;
+
 		service_id = be16_to_cpu(svc_rspmsg->service_id);
 		max_msglen = be16_to_cpu(svc_rspmsg->max_msg_len);
 		endpoint = &target->endpoint[epid];
@@ -170,7 +173,6 @@ static int htc_config_pipe_credits(struct htc_target *target)
 	time_left = wait_for_completion_timeout(&target->cmd_wait, HZ);
 	if (!time_left) {
 		dev_err(target->dev, "HTC credit config timeout\n");
-		kfree_skb(skb);
 		return -ETIMEDOUT;
 	}
 
@@ -206,7 +208,6 @@ static int htc_setup_complete(struct htc_target *target)
 	time_left = wait_for_completion_timeout(&target->cmd_wait, HZ);
 	if (!time_left) {
 		dev_err(target->dev, "HTC start timeout\n");
-		kfree_skb(skb);
 		return -ETIMEDOUT;
 	}
 
@@ -279,7 +280,6 @@ int htc_connect_service(struct htc_target *target,
 	if (!time_left) {
 		dev_err(target->dev, "Service connection timeout for: %d\n",
 			service_connreq->service_id);
-		kfree_skb(skb);
 		return -ETIMEDOUT;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index cdc146091194..e7a3127395be 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -112,14 +112,17 @@ struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv)
 	return wmi;
 }
 
-void ath9k_deinit_wmi(struct ath9k_htc_priv *priv)
+void ath9k_stop_wmi(struct ath9k_htc_priv *priv)
 {
 	struct wmi *wmi = priv->wmi;
 
 	mutex_lock(&wmi->op_mutex);
 	wmi->stopped = true;
 	mutex_unlock(&wmi->op_mutex);
+}
 
+void ath9k_destoy_wmi(struct ath9k_htc_priv *priv)
+{
 	kfree(priv->wmi);
 }
 
@@ -336,7 +339,6 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 		ath_dbg(common, WMI, "Timeout waiting for WMI command: %s\n",
 			wmi_cmd_to_name(cmd_id));
 		mutex_unlock(&wmi->op_mutex);
-		kfree_skb(skb);
 		return -ETIMEDOUT;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/wmi.h b/drivers/net/wireless/ath/ath9k/wmi.h
index 380175d5ecd7..d8b912206232 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.h
+++ b/drivers/net/wireless/ath/ath9k/wmi.h
@@ -179,7 +179,6 @@ struct wmi {
 };
 
 struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv);
-void ath9k_deinit_wmi(struct ath9k_htc_priv *priv);
 int ath9k_wmi_connect(struct htc_target *htc, struct wmi *wmi,
 		      enum htc_endpoint_id *wmi_ctrl_epid);
 int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
@@ -189,6 +188,8 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 void ath9k_wmi_event_tasklet(unsigned long data);
 void ath9k_fatal_work(struct work_struct *work);
 void ath9k_wmi_event_drain(struct ath9k_htc_priv *priv);
+void ath9k_stop_wmi(struct ath9k_htc_priv *priv);
+void ath9k_destoy_wmi(struct ath9k_htc_priv *priv);
 
 #define WMI_CMD(_wmi_cmd)						\
 	do {								\
diff --git a/drivers/net/wireless/ath/carl9170/fwcmd.h b/drivers/net/wireless/ath/carl9170/fwcmd.h
index ea1d80f9a50e..56999a3b9d3b 100644
--- a/drivers/net/wireless/ath/carl9170/fwcmd.h
+++ b/drivers/net/wireless/ath/carl9170/fwcmd.h
@@ -127,7 +127,7 @@ struct carl9170_write_reg {
 struct carl9170_write_reg_byte {
 	__le32	addr;
 	__le32  count;
-	u8	val[0];
+	u8	val[];
 } __packed;
 
 #define	CARL9170FW_PHY_HT_ENABLE		0x4
diff --git a/drivers/net/wireless/ath/carl9170/hw.h b/drivers/net/wireless/ath/carl9170/hw.h
index 08e0ae9c5836..555ad4975970 100644
--- a/drivers/net/wireless/ath/carl9170/hw.h
+++ b/drivers/net/wireless/ath/carl9170/hw.h
@@ -851,7 +851,7 @@ struct ar9170_stream {
 	__le16 length;
 	__le16 tag;
 
-	u8 payload[0];
+	u8 payload[];
 } __packed __aligned(4);
 #define AR9170_STREAM_LEN				4
 
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index 6ba0fd57c951..aab5a58616fc 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -2240,7 +2240,7 @@ struct wcn36xx_hal_process_ptt_msg_req_msg {
 	struct wcn36xx_hal_msg_header header;
 
 	/* Actual FTM Command body */
-	u8 ptt_msg[0];
+	u8 ptt_msg[];
 } __packed;
 
 struct wcn36xx_hal_process_ptt_msg_rsp_msg {
@@ -2249,7 +2249,7 @@ struct wcn36xx_hal_process_ptt_msg_rsp_msg {
 	/* FTM Command response status */
 	u32 ptt_msg_resp_status;
 	/* Actual FTM Command body */
-	u8 ptt_msg[0];
+	u8 ptt_msg[];
 } __packed;
 
 struct update_edca_params_req_msg {
diff --git a/drivers/net/wireless/ath/wcn36xx/testmode.h b/drivers/net/wireless/ath/wcn36xx/testmode.h
index 4c6cfdb46580..09d68fab9add 100644
--- a/drivers/net/wireless/ath/wcn36xx/testmode.h
+++ b/drivers/net/wireless/ath/wcn36xx/testmode.h
@@ -20,7 +20,7 @@ struct ftm_rsp_msg {
 	u16 msg_id;
 	u16 msg_body_length;
 	u32 resp_status;
-	u8 msg_response[0];
+	u8 msg_response[];
 } __packed;
 
 /* The request buffer of FTM which contains a byte of command and the request */
diff --git a/drivers/net/wireless/ath/wil6210/fw.h b/drivers/net/wireless/ath/wil6210/fw.h
index 540fa1607794..440614d61156 100644
--- a/drivers/net/wireless/ath/wil6210/fw.h
+++ b/drivers/net/wireless/ath/wil6210/fw.h
@@ -33,7 +33,7 @@ struct wil_fw_record_head {
  */
 struct wil_fw_record_data { /* type == wil_fw_type_data */
 	__le32 addr;
-	__le32 data[0]; /* [data_size], see above */
+	__le32 data[]; /* [data_size], see above */
 } __packed;
 
 /* fill with constant @value, @size bytes starting from @addr */
@@ -61,7 +61,7 @@ struct wil_fw_record_capabilities { /* type == wil_fw_type_comment */
 	/* identifies capabilities record */
 	struct wil_fw_record_comment_hdr hdr;
 	/* capabilities (variable size), see enum wmi_fw_capability */
-	u8 capabilities[0];
+	u8 capabilities[];
 } __packed;
 
 /* FW VIF concurrency encoded inside a comment record
@@ -80,7 +80,7 @@ struct wil_fw_concurrency_combo {
 	u8 n_diff_channels; /* total number of different channels allowed */
 	u8 same_bi; /* for APs, 1 if all APs must have same BI */
 	/* keep last - concurrency limits, variable size by n_limits */
-	struct wil_fw_concurrency_limit limits[0];
+	struct wil_fw_concurrency_limit limits[];
 } __packed;
 
 struct wil_fw_record_concurrency { /* type == wil_fw_type_comment */
@@ -93,7 +93,7 @@ struct wil_fw_record_concurrency { /* type == wil_fw_type_comment */
 	/* number of concurrency combinations that follow */
 	__le16 n_combos;
 	/* keep last - combinations, variable size by n_combos */
-	struct wil_fw_concurrency_combo combos[0];
+	struct wil_fw_concurrency_combo combos[];
 } __packed;
 
 /* brd file info encoded inside a comment record */
@@ -108,7 +108,7 @@ struct wil_fw_record_brd_file { /* type == wil_fw_type_comment */
 	/* identifies brd file record */
 	struct wil_fw_record_comment_hdr hdr;
 	__le32 version;
-	struct brd_info brd_info[0];
+	struct brd_info brd_info[];
 } __packed;
 
 /* perform action
@@ -116,7 +116,7 @@ struct wil_fw_record_brd_file { /* type == wil_fw_type_comment */
  */
 struct wil_fw_record_action { /* type == wil_fw_type_action */
 	__le32 action; /* action to perform: reset, wait for fw ready etc. */
-	__le32 data[0]; /* action specific, [data_size], see above */
+	__le32 data[]; /* action specific, [data_size], see above */
 } __packed;
 
 /* data block for struct wil_fw_record_direct_write */
@@ -179,7 +179,7 @@ struct wil_fw_record_gateway_data { /* type == wil_fw_type_gateway_data */
 #define WIL_FW_GW_CTL_BUSY	BIT(29) /* gateway busy performing operation */
 #define WIL_FW_GW_CTL_RUN	BIT(30) /* start gateway operation */
 	__le32 command;
-	struct wil_fw_data_gw data[0]; /* total size [data_size], see above */
+	struct wil_fw_data_gw data[]; /* total size [data_size], see above */
 } __packed;
 
 /* 4-dword gateway */
@@ -201,7 +201,7 @@ struct wil_fw_record_gateway_data4 { /* type == wil_fw_type_gateway_data4 */
 	__le32 gateway_cmd_addr;
 	__le32 gateway_ctrl_address; /* same logic as for 1-dword gw */
 	__le32 command;
-	struct wil_fw_data_gw4 data[0]; /* total size [data_size], see above */
+	struct wil_fw_data_gw4 data[]; /* total size [data_size], see above */
 } __packed;
 
 #endif /* __WIL_FW_H__ */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 23e1ed6a9d6d..c7136ce567ee 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -222,7 +222,7 @@ struct auth_no_hdr {
 	__le16 auth_transaction;
 	__le16 status_code;
 	/* possibly followed by Challenge text */
-	u8 variable[0];
+	u8 variable[];
 } __packed;
 
 u8 led_polarity = LED_POLARITY_LOW_ACTIVE;
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index e3558136e0c4..9affa4525609 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -474,7 +474,7 @@ struct wmi_start_scan_cmd {
 	struct {
 		u8 channel;
 		u8 reserved;
-	} channel_list[0];
+	} channel_list[];
 } __packed;
 
 #define WMI_MAX_PNO_SSID_NUM	(16)
@@ -530,7 +530,7 @@ struct wmi_update_ft_ies_cmd {
 	/* Length of the FT IEs */
 	__le16 ie_len;
 	u8 reserved[2];
-	u8 ie_info[0];
+	u8 ie_info[];
 } __packed;
 
 /* WMI_SET_PROBED_SSID_CMDID */
@@ -575,7 +575,7 @@ struct wmi_set_appie_cmd {
 	u8 reserved;
 	/* Length of the IE to be added to MGMT frame */
 	__le16 ie_len;
-	u8 ie_info[0];
+	u8 ie_info[];
 } __packed;
 
 /* WMI_PXMT_RANGE_CFG_CMDID */
@@ -850,7 +850,7 @@ struct wmi_pcp_start_cmd {
 struct wmi_sw_tx_req_cmd {
 	u8 dst_mac[WMI_MAC_LEN];
 	__le16 len;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 /* WMI_SW_TX_REQ_EXT_CMDID */
@@ -861,7 +861,7 @@ struct wmi_sw_tx_req_ext_cmd {
 	/* Channel to use, 0xFF for currently active channel */
 	u8 channel;
 	u8 reserved[5];
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 /* WMI_VRING_SWITCH_TIMING_CONFIG_CMDID */
@@ -1423,7 +1423,7 @@ struct wmi_rf_xpm_write_cmd {
 	u8 verify;
 	u8 reserved1[3];
 	/* actual size=num_bytes */
-	u8 data_bytes[0];
+	u8 data_bytes[];
 } __packed;
 
 /* Possible modes for temperature measurement */
@@ -1572,7 +1572,7 @@ struct wmi_tof_session_start_cmd {
 	u8 aoa_type;
 	__le16 num_of_dest;
 	u8 reserved[4];
-	struct wmi_ftm_dest_info ftm_dest_info[0];
+	struct wmi_ftm_dest_info ftm_dest_info[];
 } __packed;
 
 /* WMI_TOF_CFG_RESPONDER_CMDID */
@@ -1766,7 +1766,7 @@ struct wmi_internal_fw_ioctl_cmd {
 	/* payload max size is WMI_MAX_IOCTL_PAYLOAD_SIZE
 	 * Must be the last member of the struct
 	 */
-	__le32 payload[0];
+	__le32 payload[];
 } __packed;
 
 /* WMI_INTERNAL_FW_IOCTL_EVENTID */
@@ -1778,7 +1778,7 @@ struct wmi_internal_fw_ioctl_event {
 	/* payload max size is WMI_MAX_IOCTL_REPLY_PAYLOAD_SIZE
 	 * Must be the last member of the struct
 	 */
-	__le32 payload[0];
+	__le32 payload[];
 } __packed;
 
 /* WMI_INTERNAL_FW_EVENT_EVENTID */
@@ -1788,7 +1788,7 @@ struct wmi_internal_fw_event_event {
 	/* payload max size is WMI_MAX_INTERNAL_EVENT_PAYLOAD_SIZE
 	 * Must be the last member of the struct
 	 */
-	__le32 payload[0];
+	__le32 payload[];
 } __packed;
 
 /* WMI_SET_VRING_PRIORITY_WEIGHT_CMDID */
@@ -1818,7 +1818,7 @@ struct wmi_set_vring_priority_cmd {
 	 */
 	u8 num_of_vrings;
 	u8 reserved[3];
-	struct wmi_vring_priority vring_priority[0];
+	struct wmi_vring_priority vring_priority[];
 } __packed;
 
 /* WMI_BF_CONTROL_CMDID - deprecated */
@@ -1910,7 +1910,7 @@ struct wmi_bf_control_ex_cmd {
 	u8 each_mcs_cfg_size;
 	u8 reserved1;
 	/* Configuration for each MCS */
-	struct wmi_bf_control_ex_mcs each_mcs_cfg[0];
+	struct wmi_bf_control_ex_mcs each_mcs_cfg[];
 } __packed;
 
 /* WMI_LINK_STATS_CMD */
@@ -2192,7 +2192,7 @@ struct wmi_fw_ver_event {
 	/* FW capabilities info
 	 * Must be the last member of the struct
 	 */
-	__le32 fw_capabilities[0];
+	__le32 fw_capabilities[];
 } __packed;
 
 /* WMI_GET_RF_STATUS_EVENTID */
@@ -2270,7 +2270,7 @@ struct wmi_mac_addr_resp_event {
 struct wmi_eapol_rx_event {
 	u8 src_mac[WMI_MAC_LEN];
 	__le16 eapol_len;
-	u8 eapol[0];
+	u8 eapol[];
 } __packed;
 
 /* WMI_READY_EVENTID */
@@ -2343,7 +2343,7 @@ struct wmi_connect_event {
 	u8 aid;
 	u8 reserved2[2];
 	/* not in use */
-	u8 assoc_info[0];
+	u8 assoc_info[];
 } __packed;
 
 /* disconnect_reason */
@@ -2376,7 +2376,7 @@ struct wmi_disconnect_event {
 	/* last assoc req may passed to host - not in used */
 	u8 assoc_resp_len;
 	/* last assoc req may passed to host - not in used */
-	u8 assoc_info[0];
+	u8 assoc_info[];
 } __packed;
 
 /* WMI_SCAN_COMPLETE_EVENTID */
@@ -2400,7 +2400,7 @@ struct wmi_ft_auth_status_event {
 	u8 reserved[3];
 	u8 mac_addr[WMI_MAC_LEN];
 	__le16 ie_len;
-	u8 ie_info[0];
+	u8 ie_info[];
 } __packed;
 
 /* WMI_FT_REASSOC_STATUS_EVENTID */
@@ -2418,7 +2418,7 @@ struct wmi_ft_reassoc_status_event {
 	__le16 reassoc_req_ie_len;
 	__le16 reassoc_resp_ie_len;
 	u8 reserved[4];
-	u8 ie_info[0];
+	u8 ie_info[];
 } __packed;
 
 /* wmi_rx_mgmt_info */
@@ -2461,7 +2461,7 @@ struct wmi_stop_sched_scan_event {
 
 struct wmi_sched_scan_result_event {
 	struct wmi_rx_mgmt_info info;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 /* WMI_ACS_PASSIVE_SCAN_COMPLETE_EVENT */
@@ -2492,7 +2492,7 @@ struct wmi_acs_passive_scan_complete_event {
 	__le16 filled;
 	u8 num_scanned_channels;
 	u8 reserved;
-	struct scan_acs_info scan_info_list[0];
+	struct scan_acs_info scan_info_list[];
 } __packed;
 
 /* WMI_BA_STATUS_EVENTID */
@@ -2751,7 +2751,7 @@ struct wmi_rf_xpm_read_result_event {
 	u8 status;
 	u8 reserved[3];
 	/* requested num_bytes of data */
-	u8 data_bytes[0];
+	u8 data_bytes[];
 } __packed;
 
 /* EVENT: WMI_RF_XPM_WRITE_RESULT_EVENTID */
@@ -2769,7 +2769,7 @@ struct wmi_tx_mgmt_packet_event {
 /* WMI_RX_MGMT_PACKET_EVENTID */
 struct wmi_rx_mgmt_packet_event {
 	struct wmi_rx_mgmt_info info;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 /* WMI_ECHO_RSP_EVENTID */
@@ -2969,7 +2969,7 @@ struct wmi_rs_cfg_ex_cmd {
 	u8 each_mcs_cfg_size;
 	u8 reserved[3];
 	/* Configuration for each MCS */
-	struct wmi_rs_cfg_ex_mcs each_mcs_cfg[0];
+	struct wmi_rs_cfg_ex_mcs each_mcs_cfg[];
 } __packed;
 
 /* WMI_RS_CFG_EX_EVENTID */
@@ -3178,7 +3178,7 @@ struct wmi_get_detailed_rs_res_ex_event {
 	u8 each_mcs_results_size;
 	u8 reserved1[3];
 	/* Results for each MCS */
-	struct wmi_rs_results_ex_mcs each_mcs_results[0];
+	struct wmi_rs_results_ex_mcs each_mcs_results[];
 } __packed;
 
 /* BRP antenna limit mode */
@@ -3320,7 +3320,7 @@ struct wmi_set_link_monitor_cmd {
 	u8 rssi_hyst;
 	u8 reserved[12];
 	u8 rssi_thresholds_list_size;
-	s8 rssi_thresholds_list[0];
+	s8 rssi_thresholds_list[];
 } __packed;
 
 /* wmi_link_monitor_event_type */
@@ -3637,7 +3637,7 @@ struct wmi_tof_ftm_per_dest_res_event {
 	/* Measurments are from RFs, defined by the mask */
 	__le32 meas_rf_mask;
 	u8 reserved0[3];
-	struct wmi_responder_ftm_res responder_ftm_res[0];
+	struct wmi_responder_ftm_res responder_ftm_res[];
 } __packed;
 
 /* WMI_TOF_CFG_RESPONDER_EVENTID */
@@ -3669,7 +3669,7 @@ struct wmi_tof_channel_info_event {
 	/* data report length */
 	u8 len;
 	/* data report payload */
-	u8 report[0];
+	u8 report[];
 } __packed;
 
 /* WMI_TOF_SET_TX_RX_OFFSET_EVENTID */
@@ -4085,7 +4085,7 @@ struct wmi_link_stats_event {
 	u8 has_next;
 	u8 reserved[5];
 	/* a stream of wmi_link_stats_record_s */
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 /* WMI_LINK_STATS_EVENT */
@@ -4094,7 +4094,7 @@ struct wmi_link_stats_record {
 	u8 record_type_id;
 	u8 reserved;
 	__le16 record_size;
-	u8 record[0];
+	u8 record[];
 } __packed;
 
 /* WMI_LINK_STATS_TYPE_BASIC */
diff --git a/drivers/net/wireless/broadcom/b43legacy/xmit.c b/drivers/net/wireless/broadcom/b43legacy/xmit.c
index e9b23c2e5bd4..efd63f4ce74f 100644
--- a/drivers/net/wireless/broadcom/b43legacy/xmit.c
+++ b/drivers/net/wireless/broadcom/b43legacy/xmit.c
@@ -558,6 +558,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
 	default:
 		b43legacywarn(dev->wl, "Unexpected value for chanstat (0x%X)\n",
 		       chanstat);
+		goto drop;
 	}
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index b684a5b6d904..22a17ae09e94 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -961,7 +961,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43340),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43364),
+	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43364),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4339),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430),
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 2ba165330038..fa846471dac2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -4979,21 +4979,15 @@ brcmf_cfg80211_change_station(struct wiphy *wiphy, struct net_device *ndev,
 }
 
 static void
-brcmf_cfg80211_mgmt_frame_register(struct wiphy *wiphy,
-				   struct wireless_dev *wdev,
-				   u16 frame_type, bool reg)
+brcmf_cfg80211_update_mgmt_frame_registrations(struct wiphy *wiphy,
+					       struct wireless_dev *wdev,
+					       struct mgmt_frame_regs *upd)
 {
 	struct brcmf_cfg80211_vif *vif;
-	u16 mgmt_type;
 
-	brcmf_dbg(TRACE, "Enter, frame_type %04x, reg=%d\n", frame_type, reg);
-
-	mgmt_type = (frame_type & IEEE80211_FCTL_STYPE) >> 4;
 	vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
-	if (reg)
-		vif->mgmt_rx_reg |= BIT(mgmt_type);
-	else
-		vif->mgmt_rx_reg &= ~BIT(mgmt_type);
+
+	vif->mgmt_rx_reg = upd->interface_stypes;
 }
 
 
@@ -5408,7 +5402,8 @@ static struct cfg80211_ops brcmf_cfg80211_ops = {
 	.change_station = brcmf_cfg80211_change_station,
 	.sched_scan_start = brcmf_cfg80211_sched_scan_start,
 	.sched_scan_stop = brcmf_cfg80211_sched_scan_stop,
-	.mgmt_frame_register = brcmf_cfg80211_mgmt_frame_register,
+	.update_mgmt_frame_registrations =
+		brcmf_cfg80211_update_mgmt_frame_registrations,
 	.mgmt_tx = brcmf_cfg80211_mgmt_tx,
 	.remain_on_channel = brcmf_p2p_remain_on_channel,
 	.cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel,
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/commonring.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/commonring.c
index 49db54d23e03..e44236cb210e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/commonring.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/commonring.c
@@ -180,14 +180,8 @@ brcmf_commonring_reserve_for_write_multiple(struct brcmf_commonring *commonring,
 
 int brcmf_commonring_write_complete(struct brcmf_commonring *commonring)
 {
-	void *address;
-
-	address = commonring->buf_addr;
-	address += (commonring->f_ptr * commonring->item_len);
-	if (commonring->f_ptr > commonring->w_ptr) {
-		address = commonring->buf_addr;
+	if (commonring->f_ptr > commonring->w_ptr)
 		commonring->f_ptr = 0;
-	}
 
 	commonring->f_ptr = commonring->w_ptr;
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 5da0dda0d899..0dcefbd0c000 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -285,13 +285,14 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
 	if (!err)
 		ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_SCAN_RANDOM_MAC);
 
+	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
+
 	if (drvr->settings->feature_disable) {
 		brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n",
 			  ifp->drvr->feat_flags,
 			  drvr->settings->feature_disable);
 		ifp->drvr->feat_flags &= ~drvr->settings->feature_disable;
 	}
-	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
 
 	brcmf_feat_firmware_overrides(drvr);
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index 8e8b685cfe09..648efcbc819f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -1431,6 +1431,7 @@ int brcms_up(struct brcms_info *wl)
  * precondition: perimeter lock has been acquired
  */
 void brcms_down(struct brcms_info *wl)
+	__must_hold(&wl->lock)
 {
 	uint callbacks, ret_val = 0;
 
@@ -1717,6 +1718,7 @@ int brcms_check_firmwares(struct brcms_info *wl)
  * precondition: perimeter lock has been acquired
  */
 bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
+	__must_hold(&wl->lock)
 {
 	bool blocked = brcms_c_check_radio_disabled(wl->wlc);
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
index 7f2c15c799d2..d88f8d456b94 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
@@ -3768,17 +3768,14 @@ static void brcms_c_set_ps_ctrl(struct brcms_c_info *wlc)
  * Write this BSS config's MAC address to core.
  * Updates RXE match engine.
  */
-static int brcms_c_set_mac(struct brcms_bss_cfg *bsscfg)
+static void brcms_c_set_mac(struct brcms_bss_cfg *bsscfg)
 {
-	int err = 0;
 	struct brcms_c_info *wlc = bsscfg->wlc;
 
 	/* enter the MAC addr into the RXE match registers */
 	brcms_c_set_addrmatch(wlc, RCM_MAC_OFFSET, wlc->pub->cur_etheraddr);
 
 	brcms_c_ampdu_macaddr_upd(wlc);
-
-	return err;
 }
 
 /* Write the BSS config's BSSID address to core (set_bssid in d11procs.tcl).
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.c
index 0ab865de1491..79d4a7a4da8b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.c
@@ -304,9 +304,8 @@ int brcms_c_stf_txchain_set(struct brcms_c_info *wlc, s32 int_val, bool force)
  * update wlc->stf->ss_opmode which represents the operational stf_ss mode
  * we're using
  */
-int brcms_c_stf_ss_update(struct brcms_c_info *wlc, struct brcms_band *band)
+void brcms_c_stf_ss_update(struct brcms_c_info *wlc, struct brcms_band *band)
 {
-	int ret_code = 0;
 	u8 prev_stf_ss;
 	u8 upd_stf_ss;
 
@@ -325,7 +324,7 @@ int brcms_c_stf_ss_update(struct brcms_c_info *wlc, struct brcms_band *band)
 				    PHY_TXC1_MODE_SISO : PHY_TXC1_MODE_CDD;
 	} else {
 		if (wlc->band != band)
-			return ret_code;
+			return;
 		upd_stf_ss = (wlc->stf->txstreams == 1) ?
 				PHY_TXC1_MODE_SISO : band->band_stf_ss_mode;
 	}
@@ -333,8 +332,6 @@ int brcms_c_stf_ss_update(struct brcms_c_info *wlc, struct brcms_band *band)
 		wlc->stf->ss_opmode = upd_stf_ss;
 		brcms_b_band_stf_ss_set(wlc->hw, upd_stf_ss);
 	}
-
-	return ret_code;
 }
 
 int brcms_c_stf_attach(struct brcms_c_info *wlc)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.h
index ba9493009a33..aa4ab53bf634 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.h
@@ -25,7 +25,7 @@ void brcms_c_stf_detach(struct brcms_c_info *wlc);
 void brcms_c_tempsense_upd(struct brcms_c_info *wlc);
 void brcms_c_stf_ss_algo_channel_get(struct brcms_c_info *wlc,
 				     u16 *ss_algo_channel, u16 chanspec);
-int brcms_c_stf_ss_update(struct brcms_c_info *wlc, struct brcms_band *band);
+void brcms_c_stf_ss_update(struct brcms_c_info *wlc, struct brcms_band *band);
 void brcms_c_stf_phy_txant_upd(struct brcms_c_info *wlc);
 int brcms_c_stf_txchain_set(struct brcms_c_info *wlc, s32 int_val, bool force);
 bool brcms_c_stf_stbc_rx_set(struct brcms_c_info *wlc, s32 int_val);
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
index 60b5e08dd6df..c57ec3ed097c 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
@@ -3386,7 +3386,7 @@ struct ipw_fw {
 	__le32 boot_size;
 	__le32 ucode_size;
 	__le32 fw_size;
-	u8 data[0];
+	u8 data[];
 };
 
 static int ipw_get_fw(struct ipw_priv *priv,
@@ -7042,23 +7042,22 @@ static int ipw_qos_association(struct ipw_priv *priv,
 * off the network from the associated setting, adjust the QoS
 * setting
 */
-static int ipw_qos_association_resp(struct ipw_priv *priv,
+static void ipw_qos_association_resp(struct ipw_priv *priv,
 				    struct libipw_network *network)
 {
-	int ret = 0;
 	unsigned long flags;
 	u32 size = sizeof(struct libipw_qos_parameters);
 	int set_qos_param = 0;
 
 	if ((priv == NULL) || (network == NULL) ||
 	    (priv->assoc_network == NULL))
-		return ret;
+		return;
 
 	if (!(priv->status & STATUS_ASSOCIATED))
-		return ret;
+		return;
 
 	if ((priv->ieee->iw_mode != IW_MODE_INFRA))
-		return ret;
+		return;
 
 	spin_lock_irqsave(&priv->ieee->lock, flags);
 	if (network->flags & NETWORK_HAS_QOS_PARAMETERS) {
@@ -7088,8 +7087,6 @@ static int ipw_qos_association_resp(struct ipw_priv *priv,
 
 	if (set_qos_param == 1)
 		schedule_work(&priv->qos_activate);
-
-	return ret;
 }
 
 static u32 ipw_qos_get_burst_duration(struct ipw_priv *priv)
@@ -10643,10 +10640,8 @@ static void ipw_bg_link_down(struct work_struct *work)
 	mutex_unlock(&priv->mutex);
 }
 
-static int ipw_setup_deferred_work(struct ipw_priv *priv)
+static void ipw_setup_deferred_work(struct ipw_priv *priv)
 {
-	int ret = 0;
-
 	init_waitqueue_head(&priv->wait_command_queue);
 	init_waitqueue_head(&priv->wait_state);
 
@@ -10680,8 +10675,6 @@ static int ipw_setup_deferred_work(struct ipw_priv *priv)
 
 	tasklet_init(&priv->irq_tasklet,
 		     ipw_irq_tasklet, (unsigned long)priv);
-
-	return ret;
 }
 
 static void shim__set_security(struct net_device *dev,
@@ -11662,11 +11655,7 @@ static int ipw_pci_probe(struct pci_dev *pdev,
 	IPW_DEBUG_INFO("pci_resource_len = 0x%08x\n", length);
 	IPW_DEBUG_INFO("pci_resource_base = %p\n", base);
 
-	err = ipw_setup_deferred_work(priv);
-	if (err) {
-		IPW_ERROR("Unable to setup deferred work\n");
-		goto out_iounmap;
-	}
+	ipw_setup_deferred_work(priv);
 
 	ipw_sw_reset(priv, 1);
 
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.h b/drivers/net/wireless/intel/ipw2x00/ipw2200.h
index 4346520545c4..09fa7f19050f 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.h
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.h
@@ -448,7 +448,7 @@ struct tfd_command {
 	u8 index;
 	u8 length;
 	__le16 reserved;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct tfd_data {
@@ -675,7 +675,7 @@ struct ipw_rx_frame {
 	// is identical)
 	u8 rtscts_seen;		// 0x1 RTS seen ; 0x2 CTS seen
 	__le16 length;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 struct ipw_rx_header {
@@ -1002,7 +1002,7 @@ struct ipw_cmd {	 /* XXX */
    * Incoming parameters listed 1-st, followed by outcoming params.
    * nParams=(len+3)/4+status_len
    */
-	u32 param[0];
+	u32 param[];
 } __packed;
 
 #define STATUS_HCMD_ACTIVE      (1<<0)	/**< host command in progress */
@@ -1108,7 +1108,7 @@ struct ipw_fw_error {	 /* XXX */
 	u32 log_len;
 	struct ipw_error_elem *elem;
 	struct ipw_event *log;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 #ifdef CONFIG_IPW2200_PROMISCUOUS
@@ -1153,7 +1153,7 @@ struct ipw_rt_hdr {
 	s8 rt_dbmsignal;	/* signal in dbM, kluged to signed */
 	s8 rt_dbmnoise;
 	u8 rt_antenna;	/* antenna number */
-	u8 payload[0];  /* payload... */
+	u8 payload[];  /* payload... */
 } __packed;
 #endif
 
diff --git a/drivers/net/wireless/intel/ipw2x00/libipw.h b/drivers/net/wireless/intel/ipw2x00/libipw.h
index e4a6ab4e8391..e87538a8b88b 100644
--- a/drivers/net/wireless/intel/ipw2x00/libipw.h
+++ b/drivers/net/wireless/intel/ipw2x00/libipw.h
@@ -334,7 +334,7 @@ struct libipw_hdr_1addr {
 	__le16 frame_ctl;
 	__le16 duration_id;
 	u8 addr1[ETH_ALEN];
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct libipw_hdr_2addr {
@@ -342,7 +342,7 @@ struct libipw_hdr_2addr {
 	__le16 duration_id;
 	u8 addr1[ETH_ALEN];
 	u8 addr2[ETH_ALEN];
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct libipw_hdr_3addr {
@@ -352,7 +352,7 @@ struct libipw_hdr_3addr {
 	u8 addr2[ETH_ALEN];
 	u8 addr3[ETH_ALEN];
 	__le16 seq_ctl;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct libipw_hdr_4addr {
@@ -363,7 +363,7 @@ struct libipw_hdr_4addr {
 	u8 addr3[ETH_ALEN];
 	__le16 seq_ctl;
 	u8 addr4[ETH_ALEN];
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct libipw_hdr_3addrqos {
@@ -380,7 +380,7 @@ struct libipw_hdr_3addrqos {
 struct libipw_info_element {
 	u8 id;
 	u8 len;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /*
@@ -406,7 +406,7 @@ struct libipw_auth {
 	__le16 transaction;
 	__le16 status;
 	/* challenge */
-	struct libipw_info_element info_element[0];
+	struct libipw_info_element info_element[];
 } __packed;
 
 struct libipw_channel_switch {
@@ -442,7 +442,7 @@ struct libipw_disassoc {
 struct libipw_probe_request {
 	struct libipw_hdr_3addr header;
 	/* SSID, supported rates */
-	struct libipw_info_element info_element[0];
+	struct libipw_info_element info_element[];
 } __packed;
 
 struct libipw_probe_response {
@@ -452,7 +452,7 @@ struct libipw_probe_response {
 	__le16 capability;
 	/* SSID, supported rates, FH params, DS params,
 	 * CF params, IBSS params, TIM (if beacon), RSN */
-	struct libipw_info_element info_element[0];
+	struct libipw_info_element info_element[];
 } __packed;
 
 /* Alias beacon for probe_response */
@@ -463,7 +463,7 @@ struct libipw_assoc_request {
 	__le16 capability;
 	__le16 listen_interval;
 	/* SSID, supported rates, RSN */
-	struct libipw_info_element info_element[0];
+	struct libipw_info_element info_element[];
 } __packed;
 
 struct libipw_reassoc_request {
@@ -471,7 +471,7 @@ struct libipw_reassoc_request {
 	__le16 capability;
 	__le16 listen_interval;
 	u8 current_ap[ETH_ALEN];
-	struct libipw_info_element info_element[0];
+	struct libipw_info_element info_element[];
 } __packed;
 
 struct libipw_assoc_response {
@@ -480,7 +480,7 @@ struct libipw_assoc_response {
 	__le16 status;
 	__le16 aid;
 	/* supported rates */
-	struct libipw_info_element info_element[0];
+	struct libipw_info_element info_element[];
 } __packed;
 
 struct libipw_txb {
@@ -490,7 +490,7 @@ struct libipw_txb {
 	u8 reserved;
 	u16 frag_size;
 	u16 payload_size;
-	struct sk_buff *fragments[0];
+	struct sk_buff *fragments[];
 };
 
 /* SWEEP TABLE ENTRIES NUMBER */
@@ -594,7 +594,7 @@ struct libipw_ibss_dfs {
 	struct libipw_info_element ie;
 	u8 owner[ETH_ALEN];
 	u8 recovery_interval;
-	struct libipw_channel_map channel_map[0];
+	struct libipw_channel_map channel_map[];
 };
 
 struct libipw_csa {
@@ -830,7 +830,7 @@ struct libipw_device {
 
 	/* This must be the last item so that it points to the data
 	 * allocated beyond this structure by alloc_libipw */
-	u8 priv[0];
+	u8 priv[];
 };
 
 #define IEEE_A            (1<<0)
diff --git a/drivers/net/wireless/intel/iwlegacy/commands.h b/drivers/net/wireless/intel/iwlegacy/commands.h
index dd744135c956..89c6671b32bc 100644
--- a/drivers/net/wireless/intel/iwlegacy/commands.h
+++ b/drivers/net/wireless/intel/iwlegacy/commands.h
@@ -203,7 +203,7 @@ struct il_cmd_header {
 	__le16 sequence;
 
 	/* command or response/notification data follows immediately */
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /**
@@ -1112,7 +1112,7 @@ struct il_wep_cmd {
 	u8 global_key_type;
 	u8 flags;
 	u8 reserved;
-	struct il_wep_key key[0];
+	struct il_wep_key key[];
 } __packed;
 
 #define WEP_KEY_WEP_TYPE 1
@@ -1166,7 +1166,7 @@ struct il3945_rx_frame_stats {
 	u8 agc;
 	__le16 sig_avg;
 	__le16 noise_diff;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct il3945_rx_frame_hdr {
@@ -1175,7 +1175,7 @@ struct il3945_rx_frame_hdr {
 	u8 reserved1;
 	u8 rate;
 	__le16 len;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct il3945_rx_frame_end {
@@ -1211,7 +1211,7 @@ struct il4965_rx_non_cfg_phy {
 	__le16 ant_selection;	/* ant A bit 4, ant B bit 5, ant C bit 6 */
 	__le16 agc_info;	/* agc code 0:6, agc dB 7:13, reserved 14:15 */
 	u8 rssi_info[6];	/* we use even entries, 0/2/4 for A/B/C rssi */
-	u8 pad[0];
+	u8 pad[];
 } __packed;
 
 /*
@@ -1409,7 +1409,7 @@ struct il3945_tx_cmd {
 	 * length is 26 or 30 bytes, followed by payload data
 	 */
 	u8 payload[0];
-	struct ieee80211_hdr hdr[0];
+	struct ieee80211_hdr hdr[];
 } __packed;
 
 /*
@@ -1511,7 +1511,7 @@ struct il_tx_cmd {
 	 * length is 26 or 30 bytes, followed by payload data
 	 */
 	u8 payload[0];
-	struct ieee80211_hdr hdr[0];
+	struct ieee80211_hdr hdr[];
 } __packed;
 
 /* TX command response is sent after *3945* transmission attempts.
@@ -2520,7 +2520,7 @@ struct il3945_scan_cmd {
 	 * for one scan to complete (i.e. receive N_SCAN_COMPLETE)
 	 * before requesting another scan.
 	 */
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 struct il_scan_cmd {
@@ -2564,7 +2564,7 @@ struct il_scan_cmd {
 	 * for one scan to complete (i.e. receive N_SCAN_COMPLETE)
 	 * before requesting another scan.
 	 */
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /* Can abort will notify by complete notification with abort status. */
@@ -2664,7 +2664,7 @@ struct il3945_tx_beacon_cmd {
 	__le16 tim_idx;
 	u8 tim_size;
 	u8 reserved1;
-	struct ieee80211_hdr frame[0];	/* beacon frame */
+	struct ieee80211_hdr frame[];	/* beacon frame */
 } __packed;
 
 struct il_tx_beacon_cmd {
@@ -2672,7 +2672,7 @@ struct il_tx_beacon_cmd {
 	__le16 tim_idx;
 	u8 tim_size;
 	u8 reserved1;
-	struct ieee80211_hdr frame[0];	/* beacon frame */
+	struct ieee80211_hdr frame[];	/* beacon frame */
 } __packed;
 
 /******************************************************************************
diff --git a/drivers/net/wireless/intel/iwlegacy/iwl-spectrum.h b/drivers/net/wireless/intel/iwlegacy/iwl-spectrum.h
index a3b490501a70..1e8ab704dbfb 100644
--- a/drivers/net/wireless/intel/iwlegacy/iwl-spectrum.h
+++ b/drivers/net/wireless/intel/iwlegacy/iwl-spectrum.h
@@ -53,7 +53,7 @@ struct ieee80211_measurement_params {
 struct ieee80211_info_element {
 	u8 id;
 	u8 len;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 struct ieee80211_measurement_request {
@@ -61,7 +61,7 @@ struct ieee80211_measurement_request {
 	u8 token;
 	u8 mode;
 	u8 type;
-	struct ieee80211_measurement_params params[0];
+	struct ieee80211_measurement_params params[];
 } __packed;
 
 struct ieee80211_measurement_report {
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/commands.h b/drivers/net/wireless/intel/iwlwifi/dvm/commands.h
index 0f4be4be181c..fdcc1292a92b 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/commands.h
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/commands.h
@@ -1023,7 +1023,7 @@ struct iwl_wep_cmd {
 	u8 global_key_type;
 	u8 flags;
 	u8 reserved;
-	struct iwl_wep_key key[0];
+	struct iwl_wep_key key[];
 } __packed;
 
 #define WEP_KEY_WEP_TYPE 1
@@ -1305,7 +1305,7 @@ struct iwl_tx_cmd {
 	 * length is 26 or 30 bytes, followed by payload data
 	 */
 	u8 payload[0];
-	struct ieee80211_hdr hdr[0];
+	struct ieee80211_hdr hdr[];
 } __packed;
 
 /*
@@ -2380,7 +2380,7 @@ struct iwl_scan_cmd {
 	 * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
 	 * before requesting another scan.
 	 */
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /* Can abort will notify by complete notification with abort status. */
@@ -2475,7 +2475,7 @@ struct iwl_tx_beacon_cmd {
 	__le16 tim_idx;
 	u8 tim_size;
 	u8 reserved1;
-	struct ieee80211_hdr frame[0];	/* beacon frame */
+	struct ieee80211_hdr frame[];	/* beacon frame */
 } __packed;
 
 /******************************************************************************
@@ -3188,7 +3188,7 @@ struct iwl_calib_hdr {
 
 struct iwl_calib_cmd {
 	struct iwl_calib_hdr hdr;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 struct iwl_calib_xtal_freq_cmd {
@@ -3216,7 +3216,7 @@ struct iwl_calib_temperature_offset_v2_cmd {
 /* IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */
 struct iwl_calib_chain_noise_reset_cmd {
 	struct iwl_calib_hdr hdr;
-	u8 data[0];
+	u8 data[];
 };
 
 /* IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h b/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h
index 97b49843e318..397ac89a04c2 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h
@@ -351,7 +351,7 @@ struct iwl_mcc_update_resp_v3 {
 	__le16 time;
 	__le16 geo_info;
 	__le32 n_channels;
-	__le32 channels[0];
+	__le32 channels[];
 } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_3 */
 
 /**
@@ -380,7 +380,7 @@ struct iwl_mcc_update_resp {
 	u8 source_id;
 	u8 reserved[3];
 	__le32 n_channels;
-	__le32 channels[0];
+	__le32 channels[];
 } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_4 */
 
 /**
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/debugfs.c b/drivers/net/wireless/intel/iwlwifi/fw/debugfs.c
index 89f74116569d..cc1d93606d9b 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/debugfs.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/debugfs.c
@@ -261,7 +261,7 @@ struct hcmd_write_data {
 	__be32 cmd_id;
 	__be32 flags;
 	__be16 length;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 static ssize_t iwl_dbgfs_send_hcmd_write(struct iwl_fw_runtime *fwrt, char *buf,
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h
index 3008a5246be8..b35b8920941b 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h
@@ -175,7 +175,7 @@ void iwl_opmode_deregister(const char *name);
 struct iwl_op_mode {
 	const struct iwl_op_mode_ops *ops;
 
-	char op_mode_specific[0] __aligned(sizeof(void *));
+	char op_mode_specific[] __aligned(sizeof(void *));
 };
 
 static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
index bba527b339b5..3fbbbac0953d 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
@@ -878,7 +878,7 @@ struct iwl_trans {
 
 	/* pointer to trans specific struct */
 	/*Ensure that this pointer will always be aligned to sizeof pointer */
-	char trans_specific[0] __aligned(sizeof(void *));
+	char trans_specific[] __aligned(sizeof(void *));
 };
 
 const char *iwl_get_cmd_string(struct iwl_trans *trans, u32 id);
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
index 00e7fdbaeb7f..0e92b210dcb9 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
@@ -1,10 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /******************************************************************************
  *
- * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2014, 2018 - 2020 Intel Corporation. All rights reserved.
  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
  * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
  *
  * Contact Information:
  *  Intel Linux Wireless <linuxwifi@intel.com>
@@ -1430,7 +1429,8 @@ static u32 rs_bw_from_sta_bw(struct ieee80211_sta *sta)
 		 */
 		if (ieee80211_get_vht_max_nss(&vht_cap,
 					      IEEE80211_VHT_CHANWIDTH_160MHZ,
-					      0, true) < sta->rx_nss)
+					      0, true,
+					      sta->rx_nss) < sta->rx_nss)
 			return RATE_MCS_CHAN_WIDTH_80;
 		return RATE_MCS_CHAN_WIDTH_160;
 	case IEEE80211_STA_RX_BW_80:
diff --git a/drivers/net/wireless/intersil/hostap/hostap_proc.c b/drivers/net/wireless/intersil/hostap/hostap_proc.c
index a2ee4693eaed..97c270845fd1 100644
--- a/drivers/net/wireless/intersil/hostap/hostap_proc.c
+++ b/drivers/net/wireless/intersil/hostap/hostap_proc.c
@@ -149,6 +149,7 @@ static int prism2_bss_list_proc_show(struct seq_file *m, void *v)
 }
 
 static void *prism2_bss_list_proc_start(struct seq_file *m, loff_t *_pos)
+	__acquires(&local->lock)
 {
 	local_info_t *local = PDE_DATA(file_inode(m->file));
 	spin_lock_bh(&local->lock);
@@ -162,6 +163,7 @@ static void *prism2_bss_list_proc_next(struct seq_file *m, void *v, loff_t *_pos
 }
 
 static void prism2_bss_list_proc_stop(struct seq_file *m, void *v)
+	__releases(&local->lock)
 {
 	local_info_t *local = PDE_DATA(file_inode(m->file));
 	spin_unlock_bh(&local->lock);
diff --git a/drivers/net/wireless/intersil/orinoco/spectrum_cs.c b/drivers/net/wireless/intersil/orinoco/spectrum_cs.c
index b60048c95e0a..291ef97ed45e 100644
--- a/drivers/net/wireless/intersil/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/intersil/orinoco/spectrum_cs.c
@@ -278,12 +278,11 @@ static int
 spectrum_cs_suspend(struct pcmcia_device *link)
 {
 	struct orinoco_private *priv = link->priv;
-	int err = 0;
 
 	/* Mark the device as stopped, to block IO until later */
 	orinoco_down(priv);
 
-	return err;
+	return 0;
 }
 
 static int
diff --git a/drivers/net/wireless/intersil/p54/p54usb.c b/drivers/net/wireless/intersil/p54/p54usb.c
index b94764c88750..ff0e30c0c14c 100644
--- a/drivers/net/wireless/intersil/p54/p54usb.c
+++ b/drivers/net/wireless/intersil/p54/p54usb.c
@@ -61,6 +61,7 @@ static const struct usb_device_id p54u_table[] = {
 	{USB_DEVICE(0x0db0, 0x6826)},	/* MSI UB54G (MS-6826) */
 	{USB_DEVICE(0x107b, 0x55f2)},	/* Gateway WGU-210 (Gemtek) */
 	{USB_DEVICE(0x124a, 0x4023)},	/* Shuttle PN15, Airvast WM168g, IOGear GWU513 */
+	{USB_DEVICE(0x124a, 0x4026)},	/* AirVasT USB wireless device */
 	{USB_DEVICE(0x1435, 0x0210)},	/* Inventel UR054G */
 	{USB_DEVICE(0x15a9, 0x0002)},	/* Gemtek WUBI-100GW 802.11g */
 	{USB_DEVICE(0x1630, 0x0005)},	/* 2Wire 802.11g USB (v1) / Z-Com */
diff --git a/drivers/net/wireless/intersil/prism54/isl_oid.h b/drivers/net/wireless/intersil/prism54/isl_oid.h
index 5441c1f9f2fc..1afc2ccf94ca 100644
--- a/drivers/net/wireless/intersil/prism54/isl_oid.h
+++ b/drivers/net/wireless/intersil/prism54/isl_oid.h
@@ -37,7 +37,7 @@ struct obj_mlmeex {
 	u16 state;
 	u16 code;
 	u16 size;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 struct obj_buffer {
@@ -68,12 +68,12 @@ struct obj_bss {
 
 struct obj_bsslist {
 	u32 nr;
-	struct obj_bss bsslist[0];
+	struct obj_bss bsslist[];
 } __packed;
 
 struct obj_frequencies {
 	u16 nr;
-	u16 mhz[0];
+	u16 mhz[];
 } __packed;
 
 struct obj_attachment {
@@ -81,7 +81,7 @@ struct obj_attachment {
 	char reserved;
 	short id;
 	short size;
-	char data[0];
+	char data[];
 } __packed;
 
 /*
diff --git a/drivers/net/wireless/intersil/prism54/islpci_mgt.h b/drivers/net/wireless/intersil/prism54/islpci_mgt.h
index d6bbbac46b4a..1f87d0aea60c 100644
--- a/drivers/net/wireless/intersil/prism54/islpci_mgt.h
+++ b/drivers/net/wireless/intersil/prism54/islpci_mgt.h
@@ -99,7 +99,7 @@ struct islpci_mgmtframe {
 	pimfor_header_t *header;      /* payload header, points into buf */
 	void *data;		      /* payload ex header, points into buf */
         struct work_struct ws;	      /* argument for schedule_work() */
-	char buf[0];		      /* fragment buffer */
+	char buf[];		      /* fragment buffer */
 };
 
 int
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 0528d4cb4d37..f4ded2f2ee3b 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1068,6 +1068,47 @@ static int hwsim_unicast_netgroup(struct mac80211_hwsim_data *data,
 	return res;
 }
 
+static void mac80211_hwsim_config_mac_nl(struct ieee80211_hw *hw,
+					 const u8 *addr, bool add)
+{
+	struct mac80211_hwsim_data *data = hw->priv;
+	u32 _portid = READ_ONCE(data->wmediumd);
+	struct sk_buff *skb;
+	void *msg_head;
+
+	if (!_portid && !hwsim_virtio_enabled)
+		return;
+
+	skb = genlmsg_new(GENLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!skb)
+		return;
+
+	msg_head = genlmsg_put(skb, 0, 0, &hwsim_genl_family, 0,
+			       add ? HWSIM_CMD_ADD_MAC_ADDR :
+				     HWSIM_CMD_DEL_MAC_ADDR);
+	if (!msg_head) {
+		pr_debug("mac80211_hwsim: problem with msg_head\n");
+		goto nla_put_failure;
+	}
+
+	if (nla_put(skb, HWSIM_ATTR_ADDR_TRANSMITTER,
+		    ETH_ALEN, data->addresses[1].addr))
+		goto nla_put_failure;
+
+	if (nla_put(skb, HWSIM_ATTR_ADDR_RECEIVER, ETH_ALEN, addr))
+		goto nla_put_failure;
+
+	genlmsg_end(skb, msg_head);
+
+	if (hwsim_virtio_enabled)
+		hwsim_tx_virtio(data, skb);
+	else
+		hwsim_unicast_netgroup(data, skb, _portid);
+	return;
+nla_put_failure:
+	nlmsg_free(skb);
+}
+
 static inline u16 trans_tx_rate_flags_ieee2hwsim(struct ieee80211_tx_rate *rate)
 {
 	u16 result = 0;
@@ -1545,6 +1586,9 @@ static int mac80211_hwsim_add_interface(struct ieee80211_hw *hw,
 		  vif->addr);
 	hwsim_set_magic(vif);
 
+	if (vif->type != NL80211_IFTYPE_MONITOR)
+		mac80211_hwsim_config_mac_nl(hw, vif->addr, true);
+
 	vif->cab_queue = 0;
 	vif->hw_queue[IEEE80211_AC_VO] = 0;
 	vif->hw_queue[IEEE80211_AC_VI] = 1;
@@ -1584,6 +1628,8 @@ static void mac80211_hwsim_remove_interface(
 		  vif->addr);
 	hwsim_check_magic(vif);
 	hwsim_clear_magic(vif);
+	if (vif->type != NL80211_IFTYPE_MONITOR)
+		mac80211_hwsim_config_mac_nl(hw, vif->addr, false);
 }
 
 static void mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
@@ -1781,6 +1827,8 @@ static void mac80211_hwsim_configure_filter(struct ieee80211_hw *hw,
 	data->rx_filter = 0;
 	if (*total_flags & FIF_ALLMULTI)
 		data->rx_filter |= FIF_ALLMULTI;
+	if (*total_flags & FIF_MCAST_ACTION)
+		data->rx_filter |= FIF_MCAST_ACTION;
 
 	*total_flags = data->rx_filter;
 }
@@ -2104,6 +2152,8 @@ static void hw_scan_work(struct work_struct *work)
 		hwsim->hw_scan_vif = NULL;
 		hwsim->tmp_chan = NULL;
 		mutex_unlock(&hwsim->mutex);
+		mac80211_hwsim_config_mac_nl(hwsim->hw, hwsim->scan_addr,
+					     false);
 		return;
 	}
 
@@ -2177,6 +2227,7 @@ static int mac80211_hwsim_hw_scan(struct ieee80211_hw *hw,
 	memset(hwsim->survey_data, 0, sizeof(hwsim->survey_data));
 	mutex_unlock(&hwsim->mutex);
 
+	mac80211_hwsim_config_mac_nl(hw, hwsim->scan_addr, true);
 	wiphy_dbg(hw->wiphy, "hwsim hw_scan request\n");
 
 	ieee80211_queue_delayed_work(hwsim->hw, &hwsim->hw_scan, 0);
@@ -2220,6 +2271,7 @@ static void mac80211_hwsim_sw_scan(struct ieee80211_hw *hw,
 	pr_debug("hwsim sw_scan request, prepping stuff\n");
 
 	memcpy(hwsim->scan_addr, mac_addr, ETH_ALEN);
+	mac80211_hwsim_config_mac_nl(hw, hwsim->scan_addr, true);
 	hwsim->scanning = true;
 	memset(hwsim->survey_data, 0, sizeof(hwsim->survey_data));
 
@@ -2236,6 +2288,7 @@ static void mac80211_hwsim_sw_scan_complete(struct ieee80211_hw *hw,
 
 	pr_debug("hwsim sw_scan_complete\n");
 	hwsim->scanning = false;
+	mac80211_hwsim_config_mac_nl(hw, hwsim->scan_addr, false);
 	eth_zero_addr(hwsim->scan_addr);
 
 	mutex_unlock(&hwsim->mutex);
@@ -2413,6 +2466,11 @@ static void mac80211_hwsim_get_et_stats(struct ieee80211_hw *hw,
 	WARN_ON(i != MAC80211_HWSIM_SSTATS_LEN);
 }
 
+static int mac80211_hwsim_tx_last_beacon(struct ieee80211_hw *hw)
+{
+	return 1;
+}
+
 #define HWSIM_COMMON_OPS					\
 	.tx = mac80211_hwsim_tx,				\
 	.start = mac80211_hwsim_start,				\
@@ -2423,6 +2481,7 @@ static void mac80211_hwsim_get_et_stats(struct ieee80211_hw *hw,
 	.config = mac80211_hwsim_config,			\
 	.configure_filter = mac80211_hwsim_configure_filter,	\
 	.bss_info_changed = mac80211_hwsim_bss_info_changed,	\
+	.tx_last_beacon = mac80211_hwsim_tx_last_beacon,	\
 	.sta_add = mac80211_hwsim_sta_add,			\
 	.sta_remove = mac80211_hwsim_sta_remove,		\
 	.sta_notify = mac80211_hwsim_sta_notify,		\
@@ -3003,6 +3062,10 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 			       NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
 	wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
 	wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_BEACON_PROTECTION);
+	wiphy_ext_feature_set(hw->wiphy,
+			      NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS);
+	wiphy_ext_feature_set(hw->wiphy,
+			      NL80211_EXT_FEATURE_BEACON_RATE_LEGACY);
 
 	hw->wiphy->interface_modes = param->iftypes;
 
diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h
index 28ade92adcb4..9dceed77c5d6 100644
--- a/drivers/net/wireless/mac80211_hwsim.h
+++ b/drivers/net/wireless/mac80211_hwsim.h
@@ -75,6 +75,12 @@ enum hwsim_tx_control_flags {
  * @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted
  * @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses:
  *	%HWSIM_ATTR_RADIO_ID
+ * @HWSIM_CMD_ADD_MAC_ADDR: add a receive MAC address (given in the
+ *	%HWSIM_ATTR_ADDR_RECEIVER attribute) to a device identified by
+ *	%HWSIM_ATTR_ADDR_TRANSMITTER. This lets wmediumd forward frames
+ *	to this receiver address for a given station.
+ * @HWSIM_CMD_DEL_MAC_ADDR: remove the MAC address again, the attributes
+ *	are the same as to @HWSIM_CMD_ADD_MAC_ADDR.
  * @__HWSIM_CMD_MAX: enum limit
  */
 enum {
@@ -85,6 +91,8 @@ enum {
 	HWSIM_CMD_NEW_RADIO,
 	HWSIM_CMD_DEL_RADIO,
 	HWSIM_CMD_GET_RADIO,
+	HWSIM_CMD_ADD_MAC_ADDR,
+	HWSIM_CMD_DEL_MAC_ADDR,
 	__HWSIM_CMD_MAX,
 };
 #define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1)
diff --git a/drivers/net/wireless/marvell/libertas/cmd.h b/drivers/net/wireless/marvell/libertas/cmd.h
index 80878561cb90..3c193074662b 100644
--- a/drivers/net/wireless/marvell/libertas/cmd.h
+++ b/drivers/net/wireless/marvell/libertas/cmd.h
@@ -76,7 +76,7 @@ void lbs_mac_event_disconnected(struct lbs_private *priv,
 
 /* Events */
 
-int lbs_process_event(struct lbs_private *priv, u32 event);
+void lbs_process_event(struct lbs_private *priv, u32 event);
 
 
 /* Actual commands */
diff --git a/drivers/net/wireless/marvell/libertas/cmdresp.c b/drivers/net/wireless/marvell/libertas/cmdresp.c
index b73d08381398..cb515c5584c1 100644
--- a/drivers/net/wireless/marvell/libertas/cmdresp.c
+++ b/drivers/net/wireless/marvell/libertas/cmdresp.c
@@ -220,9 +220,8 @@ int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len)
 	return ret;
 }
 
-int lbs_process_event(struct lbs_private *priv, u32 event)
+void lbs_process_event(struct lbs_private *priv, u32 event)
 {
-	int ret = 0;
 	struct cmd_header cmd;
 
 	switch (event) {
@@ -351,6 +350,4 @@ int lbs_process_event(struct lbs_private *priv, u32 event)
 		netdev_alert(priv->dev, "EVENT: unknown event id %d\n", event);
 		break;
 	}
-
-	return ret;
 }
diff --git a/drivers/net/wireless/marvell/libertas/mesh.c b/drivers/net/wireless/marvell/libertas/mesh.c
index 44c8a550da4c..f5b78257d551 100644
--- a/drivers/net/wireless/marvell/libertas/mesh.c
+++ b/drivers/net/wireless/marvell/libertas/mesh.c
@@ -828,10 +828,8 @@ static void lbs_persist_config_remove(struct net_device *dev)
  * Check mesh FW version and appropriately send the mesh start
  * command
  */
-int lbs_init_mesh(struct lbs_private *priv)
+void lbs_init_mesh(struct lbs_private *priv)
 {
-	int ret = 0;
-
 	/* Determine mesh_fw_ver from fwrelease and fwcapinfo */
 	/* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
 	/* 5.110.22 have mesh command with 0xa3 command id */
@@ -870,8 +868,6 @@ int lbs_init_mesh(struct lbs_private *priv)
 
 	/* Stop meshing until interface is brought up */
 	lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_STOP, 1);
-
-	return ret;
 }
 
 void lbs_start_mesh(struct lbs_private *priv)
diff --git a/drivers/net/wireless/marvell/libertas/mesh.h b/drivers/net/wireless/marvell/libertas/mesh.h
index 1561018f226f..d49717b20c09 100644
--- a/drivers/net/wireless/marvell/libertas/mesh.h
+++ b/drivers/net/wireless/marvell/libertas/mesh.h
@@ -16,7 +16,7 @@
 
 struct net_device;
 
-int lbs_init_mesh(struct lbs_private *priv);
+void lbs_init_mesh(struct lbs_private *priv);
 void lbs_start_mesh(struct lbs_private *priv);
 int lbs_deinit_mesh(struct lbs_private *priv);
 
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 1566d2197906..21a17d4017c4 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -269,17 +269,12 @@ mwifiex_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
  * CFG802.11 operation handler to register a mgmt frame.
  */
 static void
-mwifiex_cfg80211_mgmt_frame_register(struct wiphy *wiphy,
-				     struct wireless_dev *wdev,
-				     u16 frame_type, bool reg)
+mwifiex_cfg80211_update_mgmt_frame_registrations(struct wiphy *wiphy,
+						 struct wireless_dev *wdev,
+						 struct mgmt_frame_regs *upd)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev);
-	u32 mask;
-
-	if (reg)
-		mask = priv->mgmt_frame_mask | BIT(frame_type >> 4);
-	else
-		mask = priv->mgmt_frame_mask & ~BIT(frame_type >> 4);
+	u32 mask = upd->interface_stypes;
 
 	if (mask != priv->mgmt_frame_mask) {
 		priv->mgmt_frame_mask = mask;
@@ -4189,7 +4184,8 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.del_key = mwifiex_cfg80211_del_key,
 	.set_default_mgmt_key = mwifiex_cfg80211_set_default_mgmt_key,
 	.mgmt_tx = mwifiex_cfg80211_mgmt_tx,
-	.mgmt_frame_register = mwifiex_cfg80211_mgmt_frame_register,
+	.update_mgmt_frame_registrations =
+		mwifiex_cfg80211_update_mgmt_frame_registrations,
 	.remain_on_channel = mwifiex_cfg80211_remain_on_channel,
 	.cancel_remain_on_channel = mwifiex_cfg80211_cancel_remain_on_channel,
 	.set_default_key = mwifiex_cfg80211_set_default_key,
diff --git a/drivers/net/wireless/marvell/mwl8k.c b/drivers/net/wireless/marvell/mwl8k.c
index 47fb4b3ea004..97f23f93f6e7 100644
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -2668,7 +2668,7 @@ struct mwl8k_cmd_mac_multicast_adr {
 	struct mwl8k_cmd_pkt header;
 	__le16 action;
 	__le16 numaddr;
-	__u8 addr[0][ETH_ALEN];
+	__u8 addr[][ETH_ALEN];
 };
 
 #define MWL8K_ENABLE_RX_DIRECTED	0x0001
diff --git a/drivers/net/wireless/quantenna/qtnfmac/bus.h b/drivers/net/wireless/quantenna/qtnfmac/bus.h
index 87d048df09d1..3334c45aac13 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/bus.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/bus.h
@@ -69,7 +69,7 @@ struct qtnf_bus {
 	struct notifier_block netdev_nb;
 	u8 hw_id[ETH_ALEN];
 	/* bus private data */
-	char bus_priv[0] __aligned(sizeof(void *));
+	char bus_priv[] __aligned(sizeof(void *));
 };
 
 static inline bool qtnf_fw_is_up(struct qtnf_bus *bus)
diff --git a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
index 8be17106008d..54cdf3ad09d7 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
@@ -389,55 +389,57 @@ static int qtnf_set_wiphy_params(struct wiphy *wiphy, u32 changed)
 }
 
 static void
-qtnf_mgmt_frame_register(struct wiphy *wiphy, struct wireless_dev *wdev,
-			 u16 frame_type, bool reg)
+qtnf_update_mgmt_frame_registrations(struct wiphy *wiphy,
+				     struct wireless_dev *wdev,
+				     struct mgmt_frame_regs *upd)
 {
 	struct qtnf_vif *vif = qtnf_netdev_get_priv(wdev->netdev);
-	u16 mgmt_type;
-	u16 new_mask;
-	u16 qlink_frame_type = 0;
+	u16 new_mask = upd->interface_stypes;
+	u16 old_mask = vif->mgmt_frames_bitmask;
+	static const struct {
+		u16 mask, qlink_type;
+	} updates[] = {
+		{
+			.mask = BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
+				BIT(IEEE80211_STYPE_ASSOC_REQ >> 4),
+			.qlink_type = QLINK_MGMT_FRAME_ASSOC_REQ,
+		},
+		{
+			.mask = BIT(IEEE80211_STYPE_AUTH >> 4),
+			.qlink_type = QLINK_MGMT_FRAME_AUTH,
+		},
+		{
+			.mask = BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
+			.qlink_type = QLINK_MGMT_FRAME_PROBE_REQ,
+		},
+		{
+			.mask = BIT(IEEE80211_STYPE_ACTION >> 4),
+			.qlink_type = QLINK_MGMT_FRAME_ACTION,
+		},
+	};
+	unsigned int i;
 
-	mgmt_type = (frame_type & IEEE80211_FCTL_STYPE) >> 4;
+	if (new_mask == old_mask)
+		return;
 
-	if (reg)
-		new_mask = vif->mgmt_frames_bitmask | BIT(mgmt_type);
-	else
-		new_mask = vif->mgmt_frames_bitmask & ~BIT(mgmt_type);
+	for (i = 0; i < ARRAY_SIZE(updates); i++) {
+		u16 mask = updates[i].mask;
+		u16 qlink_frame_type = updates[i].qlink_type;
+		bool reg;
 
-	if (new_mask == vif->mgmt_frames_bitmask)
-		return;
+		/* the ! are here due to the assoc/reassoc merge */
+		if (!(new_mask & mask) == !(old_mask & mask))
+			continue;
 
-	switch (frame_type & IEEE80211_FCTL_STYPE) {
-	case IEEE80211_STYPE_REASSOC_REQ:
-	case IEEE80211_STYPE_ASSOC_REQ:
-		qlink_frame_type = QLINK_MGMT_FRAME_ASSOC_REQ;
-		break;
-	case IEEE80211_STYPE_AUTH:
-		qlink_frame_type = QLINK_MGMT_FRAME_AUTH;
-		break;
-	case IEEE80211_STYPE_PROBE_REQ:
-		qlink_frame_type = QLINK_MGMT_FRAME_PROBE_REQ;
-		break;
-	case IEEE80211_STYPE_ACTION:
-		qlink_frame_type = QLINK_MGMT_FRAME_ACTION;
-		break;
-	default:
-		pr_warn("VIF%u.%u: unsupported frame type: %X\n",
-			vif->mac->macid, vif->vifid,
-			(frame_type & IEEE80211_FCTL_STYPE) >> 4);
-		return;
-	}
+		reg = new_mask & mask;
 
-	if (qtnf_cmd_send_register_mgmt(vif, qlink_frame_type, reg)) {
-		pr_warn("VIF%u.%u: failed to %sregister mgmt frame type 0x%x\n",
-			vif->mac->macid, vif->vifid, reg ? "" : "un",
-			frame_type);
-		return;
+		if (qtnf_cmd_send_register_mgmt(vif, qlink_frame_type, reg))
+			pr_warn("VIF%u.%u: failed to %sregister qlink frame type 0x%x\n",
+				vif->mac->macid, vif->vifid, reg ? "" : "un",
+				qlink_frame_type);
 	}
 
 	vif->mgmt_frames_bitmask = new_mask;
-	pr_debug("VIF%u.%u: %sregistered mgmt frame type 0x%x\n",
-		 vif->mac->macid, vif->vifid, reg ? "" : "un", frame_type);
 }
 
 static int
@@ -1017,7 +1019,8 @@ static struct cfg80211_ops qtn_cfg80211_ops = {
 	.change_beacon		= qtnf_change_beacon,
 	.stop_ap		= qtnf_stop_ap,
 	.set_wiphy_params	= qtnf_set_wiphy_params,
-	.mgmt_frame_register	= qtnf_mgmt_frame_register,
+	.update_mgmt_frame_registrations =
+		qtnf_update_mgmt_frame_registrations,
 	.mgmt_tx		= qtnf_mgmt_tx,
 	.change_station		= qtnf_change_station,
 	.del_station		= qtnf_del_station,
diff --git a/drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c b/drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c
index dbb241106d8a..eb67b66b846b 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c
@@ -286,7 +286,7 @@ static int pearl_skb2rbd_attach(struct qtnf_pcie_pearl_state *ps, u16 index)
 	struct sk_buff *skb;
 	dma_addr_t paddr;
 
-	skb = __netdev_alloc_skb_ip_align(NULL, SKB_BUF_SIZE, GFP_ATOMIC);
+	skb = netdev_alloc_skb_ip_align(NULL, SKB_BUF_SIZE);
 	if (!skb) {
 		priv->rx_skb[index] = NULL;
 		return -ENOMEM;
diff --git a/drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c b/drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c
index dbf3c5fd751f..d1b850aa4657 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c
@@ -247,7 +247,7 @@ topaz_skb2rbd_attach(struct qtnf_pcie_topaz_state *ts, u16 index, u32 wrap)
 	struct sk_buff *skb;
 	dma_addr_t paddr;
 
-	skb = __netdev_alloc_skb_ip_align(NULL, SKB_BUF_SIZE, GFP_ATOMIC);
+	skb = netdev_alloc_skb_ip_align(NULL, SKB_BUF_SIZE);
 	if (!skb) {
 		ts->base.rx_skb[index] = NULL;
 		return -ENOMEM;
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index 4d22a54c034f..2dda4c5d7427 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -362,7 +362,7 @@ struct qlink_cmd {
 struct qlink_cmd_init_fw {
 	struct qlink_cmd chdr;
 	__le32 qlink_proto_ver;
-	u8 var_info[0];
+	u8 var_info[];
 } __packed;
 
 /**
@@ -434,7 +434,7 @@ struct qlink_cmd_frame_tx {
 	__le32 cookie;
 	__le16 freq;
 	__le16 flags;
-	u8 frame_data[0];
+	u8 frame_data[];
 } __packed;
 
 /**
@@ -466,7 +466,7 @@ struct qlink_cmd_add_key {
 	__le32 cipher;
 	__le16 vlanid;
 	u8 rsvd[2];
-	u8 key_data[0];
+	u8 key_data[];
 } __packed;
 
 /**
@@ -578,7 +578,7 @@ struct qlink_cmd_connect {
 	u8 mfp;
 	u8 pbss;
 	u8 rsvd[2];
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 /**
@@ -592,7 +592,7 @@ struct qlink_cmd_external_auth {
 	struct qlink_cmd chdr;
 	u8 peer[ETH_ALEN];
 	__le16 status;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 /**
@@ -698,7 +698,7 @@ struct qlink_cmd_reg_notify {
 	u8 dfs_region;
 	u8 slave_radar;
 	u8 dfs_offload;
-	u8 info[0];
+	u8 info[];
 } __packed;
 
 /**
@@ -773,7 +773,7 @@ struct qlink_cmd_start_ap {
 	struct qlink_sr_params sr_params;
 	u8 twt_responder;
 	u8 rsvd[3];
-	u8 info[0];
+	u8 info[];
 } __packed;
 
 /**
@@ -807,7 +807,7 @@ struct qlink_mac_address {
 struct qlink_acl_data {
 	__le32 policy;
 	__le32 num_entries;
-	struct qlink_mac_address mac_addrs[0];
+	struct qlink_mac_address mac_addrs[];
 } __packed;
 
 /**
@@ -882,7 +882,7 @@ enum qlink_wowlan_trigger {
 struct qlink_cmd_wowlan_set {
 	struct qlink_cmd chdr;
 	__le32 triggers;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 enum qlink_ndev_event_type {
@@ -958,7 +958,7 @@ struct qlink_cmd_scan {
 	u8 bssid[ETH_ALEN];
 	u8 scan_width;
 	u8 rsvd[3];
-	u8 var_info[0];
+	u8 var_info[];
 } __packed;
 
 /**
@@ -972,7 +972,7 @@ struct qlink_cmd_update_owe {
 	struct qlink_cmd chdr;
 	u8 peer[ETH_ALEN];
 	__le16 status;
-	u8 ies[0];
+	u8 ies[];
 } __packed;
 
 /* QLINK Command Responses messages related definitions
@@ -1106,7 +1106,7 @@ struct qlink_resp_get_mac_info {
 	u8 n_reg_rules;
 	u8 dfs_region;
 	u8 rsvd[3];
-	u8 var_info[0];
+	u8 var_info[];
 } __packed;
 
 /**
@@ -1131,7 +1131,7 @@ struct qlink_resp_get_hw_info {
 	u8 mac_bitmap;
 	u8 total_tx_chain;
 	u8 total_rx_chain;
-	u8 info[0];
+	u8 info[];
 } __packed;
 
 /**
@@ -1167,7 +1167,7 @@ struct qlink_resp_get_sta_info {
 	struct qlink_resp rhdr;
 	u8 sta_addr[ETH_ALEN];
 	u8 rsvd[2];
-	u8 info[0];
+	u8 info[];
 } __packed;
 
 /**
@@ -1184,7 +1184,7 @@ struct qlink_resp_band_info_get {
 	u8 num_chans;
 	u8 num_bitrates;
 	u8 rsvd[1];
-	u8 info[0];
+	u8 info[];
 } __packed;
 
 /**
@@ -1196,7 +1196,7 @@ struct qlink_resp_band_info_get {
 struct qlink_resp_get_chan_stats {
 	struct qlink_resp rhdr;
 	__le32 chan_freq;
-	u8 info[0];
+	u8 info[];
 } __packed;
 
 /**
@@ -1270,7 +1270,7 @@ struct qlink_event_sta_assoc {
 	struct qlink_event ehdr;
 	u8 sta_addr[ETH_ALEN];
 	__le16 frame_control;
-	u8 ies[0];
+	u8 ies[];
 } __packed;
 
 /**
@@ -1297,7 +1297,7 @@ struct qlink_event_bss_join {
 	struct qlink_chandef chan;
 	u8 bssid[ETH_ALEN];
 	__le16 status;
-	u8 ies[0];
+	u8 ies[];
 } __packed;
 
 /**
@@ -1339,7 +1339,7 @@ struct qlink_event_rxmgmt {
 	__le32 flags;
 	s8 sig_dbm;
 	u8 rsvd[3];
-	u8 frame_data[0];
+	u8 frame_data[];
 } __packed;
 
 /**
@@ -1367,7 +1367,7 @@ struct qlink_event_scan_result {
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
 	u8 bssid[ETH_ALEN];
 	u8 rsvd[2];
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 /**
@@ -1456,7 +1456,7 @@ struct qlink_event_update_owe {
 	struct qlink_event ehdr;
 	u8 peer[ETH_ALEN];
 	u8 rsvd[2];
-	u8 ies[0];
+	u8 ies[];
 } __packed;
 
 /* QLINK TLVs (Type-Length Values) definitions
@@ -1512,7 +1512,7 @@ enum qlink_tlv_id {
 struct qlink_tlv_hdr {
 	__le16 type;
 	__le16 len;
-	u8 val[0];
+	u8 val[];
 } __packed;
 
 struct qlink_iface_limit {
@@ -1524,7 +1524,7 @@ struct qlink_iface_limit_record {
 	__le16 max_interfaces;
 	u8 num_different_channels;
 	u8 n_limits;
-	struct qlink_iface_limit limits[0];
+	struct qlink_iface_limit limits[];
 } __packed;
 
 #define QLINK_RSSI_OFFSET	120
@@ -1647,7 +1647,7 @@ struct qlink_tlv_ie_set {
 	u8 type;
 	u8 flags;
 	u8 rsvd[2];
-	u8 ie_data[0];
+	u8 ie_data[];
 } __packed;
 
 /**
@@ -1660,7 +1660,7 @@ struct qlink_tlv_ext_ie {
 	struct qlink_tlv_hdr hdr;
 	u8 eid_ext;
 	u8 rsvd[3];
-	u8 ie_data[0];
+	u8 ie_data[];
 } __packed;
 
 #define IEEE80211_HE_PPE_THRES_MAX_LEN		25
@@ -1681,7 +1681,7 @@ struct qlink_tlv_iftype_data {
 	struct qlink_tlv_hdr hdr;
 	u8 n_iftype_data;
 	u8 rsvd[3];
-	struct qlink_sband_iftype_data iftype_data[0];
+	struct qlink_sband_iftype_data iftype_data[];
 } __packed;
 
 /**
@@ -1867,7 +1867,7 @@ struct qlink_random_mac_addr {
 struct qlink_wowlan_capab_data {
 	__le16 version;
 	__le16 len;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /**
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
index 4865639ac9ea..02b77521b5cd 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
@@ -67,9 +67,9 @@ static int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
 	char *fw_name;
 
 	rtl8188ee_bt_reg_init(hw);
-	rtlpriv->dm.dm_initialgain_enable = 1;
+	rtlpriv->dm.dm_initialgain_enable = true;
 	rtlpriv->dm.dm_flag = 0;
-	rtlpriv->dm.disable_framebursting = 0;
+	rtlpriv->dm.disable_framebursting = false;
 	rtlpriv->dm.thermalvalue = 0;
 	rtlpci->transmit_config = CFENDFORM | BIT(15);
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
index b337d599b6f4..7a16563b3a5d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
@@ -75,9 +75,9 @@ static int rtl92ee_init_sw_vars(struct ieee80211_hw *hw)
 	rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
 	rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
 
-	rtlpriv->dm.dm_initialgain_enable = 1;
+	rtlpriv->dm.dm_initialgain_enable = true;
 	rtlpriv->dm.dm_flag = 0;
-	rtlpriv->dm.disable_framebursting = 0;
+	rtlpriv->dm.disable_framebursting = false;
 	rtlpci->transmit_config = CFENDFORM | BIT(15);
 
 	/*just 2.4G band*/
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c
index 680198280f8f..652d8ff9cccb 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c
@@ -131,7 +131,7 @@ static bool rtl8723e_dm_bt_is_same_coexist_state(struct ieee80211_hw *hw)
 	    (rtlpriv->btcoexist.previous_state_h ==
 	     rtlpriv->btcoexist.cstate_h)) {
 		RT_TRACE(rtlpriv, COMP_BT_COEXIST, DBG_DMESG,
-			 "[DM][BT], Coexist state do not chang!!\n");
+			 "[DM][BT], Coexist state do not change!!\n");
 		return true;
 	} else {
 		RT_TRACE(rtlpriv, COMP_BT_COEXIST, DBG_DMESG,
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
index 655460f61bbc..7a46c6a9deae 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
@@ -614,22 +614,22 @@ static bool _rtl8723e_llt_table_init(struct ieee80211_hw *hw)
 
 	for (i = 0; i < (txpktbuf_bndy - 1); i++) {
 		status = _rtl8723e_llt_write(hw, i, i + 1);
-		if (true != status)
+		if (!status)
 			return status;
 	}
 
 	status = _rtl8723e_llt_write(hw, (txpktbuf_bndy - 1), 0xFF);
-	if (true != status)
+	if (!status)
 		return status;
 
 	for (i = txpktbuf_bndy; i < maxpage; i++) {
 		status = _rtl8723e_llt_write(hw, i, (i + 1));
-		if (true != status)
+		if (!status)
 			return status;
 	}
 
 	status = _rtl8723e_llt_write(hw, maxpage, txpktbuf_bndy);
-	if (true != status)
+	if (!status)
 		return status;
 
 	rtl_write_byte(rtlpriv, REG_CR, 0xff);
@@ -934,7 +934,7 @@ int rtl8723e_hw_init(struct ieee80211_hw *hw)
 
 	rtlpriv->intf_ops->disable_aspm(hw);
 	rtstatus = _rtl8712e_init_mac(hw);
-	if (rtstatus != true) {
+	if (!rtstatus) {
 		pr_err("Init MAC failed\n");
 		err = 1;
 		goto exit;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
index ea86d5bf33d2..7828acb1de3f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
@@ -78,9 +78,9 @@ static int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
 
 	rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
 
-	rtlpriv->dm.dm_initialgain_enable = 1;
+	rtlpriv->dm.dm_initialgain_enable = true;
 	rtlpriv->dm.dm_flag = 0;
-	rtlpriv->dm.disable_framebursting = 0;
+	rtlpriv->dm.disable_framebursting = false;
 	rtlpriv->dm.thermalvalue = 0;
 	rtlpci->transmit_config = CFENDFORM | BIT(12) | BIT(13);
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
index 36209ac5b208..d220e8955e37 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
@@ -74,9 +74,9 @@ static int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
 	rtl8723be_bt_reg_init(hw);
 	rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
 
-	rtlpriv->dm.dm_initialgain_enable = 1;
+	rtlpriv->dm.dm_initialgain_enable = true;
 	rtlpriv->dm.dm_flag = 0;
-	rtlpriv->dm.disable_framebursting = 0;
+	rtlpriv->dm.disable_framebursting = false;
 	rtlpriv->dm.thermalvalue = 0;
 	rtlpci->transmit_config = CFENDFORM | BIT(15) | BIT(24) | BIT(25);
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
index d8df816753cb..950542a24e31 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
@@ -76,9 +76,9 @@ static int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
 	rtl8821ae_bt_reg_init(hw);
 	rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
 
-	rtlpriv->dm.dm_initialgain_enable = 1;
+	rtlpriv->dm.dm_initialgain_enable = true;
 	rtlpriv->dm.dm_flag = 0;
-	rtlpriv->dm.disable_framebursting = 0;
+	rtlpriv->dm.disable_framebursting = false;
 	rtlpriv->dm.thermalvalue = 0;
 	rtlpci->transmit_config = CFENDFORM | BIT(15) | BIT(24) | BIT(25);
 
diff --git a/drivers/net/wireless/realtek/rtw88/bf.c b/drivers/net/wireless/realtek/rtw88/bf.c
index b6d1d71f4d30..a5912da327e2 100644
--- a/drivers/net/wireless/realtek/rtw88/bf.c
+++ b/drivers/net/wireless/realtek/rtw88/bf.c
@@ -10,7 +10,6 @@
 void rtw_bf_disassoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
 		     struct ieee80211_bss_conf *bss_conf)
 {
-	struct rtw_chip_info *chip = rtwdev->chip;
 	struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
 	struct rtw_bfee *bfee = &rtwvif->bfee;
 	struct rtw_bf_info *bfinfo = &rtwdev->bf_info;
@@ -23,7 +22,7 @@ void rtw_bf_disassoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
 	else if (bfee->role == RTW_BFEE_SU)
 		bfinfo->bfer_su_cnt--;
 
-	chip->ops->config_bfee(rtwdev, rtwvif, bfee, false);
+	rtw_chip_config_bfee(rtwdev, rtwvif, bfee, false);
 
 	bfee->role = RTW_BFEE_NONE;
 }
@@ -71,7 +70,7 @@ void rtw_bf_assoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
 		bfee->aid = bss_conf->aid;
 		bfinfo->bfer_mu_cnt++;
 
-		chip->ops->config_bfee(rtwdev, rtwvif, bfee, true);
+		rtw_chip_config_bfee(rtwdev, rtwvif, bfee, true);
 	} else if ((ic_vht_cap->cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) &&
 		   (vht_cap->cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)) {
 		if (bfinfo->bfer_su_cnt >= chip->bfer_su_max_num) {
@@ -97,7 +96,7 @@ void rtw_bf_assoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
 			}
 		}
 
-		chip->ops->config_bfee(rtwdev, rtwvif, bfee, true);
+		rtw_chip_config_bfee(rtwdev, rtwvif, bfee, true);
 	}
 
 out_unlock:
diff --git a/drivers/net/wireless/realtek/rtw88/bf.h b/drivers/net/wireless/realtek/rtw88/bf.h
index 96a8216dd11f..17855edb5006 100644
--- a/drivers/net/wireless/realtek/rtw88/bf.h
+++ b/drivers/net/wireless/realtek/rtw88/bf.h
@@ -89,4 +89,26 @@ void rtw_bf_set_gid_table(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
 void rtw_bf_phy_init(struct rtw_dev *rtwdev);
 void rtw_bf_cfg_csi_rate(struct rtw_dev *rtwdev, u8 rssi, u8 cur_rate,
 			 u8 fixrate_en, u8 *new_rate);
+static inline void rtw_chip_config_bfee(struct rtw_dev *rtwdev, struct rtw_vif *vif,
+					struct rtw_bfee *bfee, bool enable)
+{
+	if (rtwdev->chip->ops->config_bfee)
+		rtwdev->chip->ops->config_bfee(rtwdev, vif, bfee, enable);
+}
+
+static inline void rtw_chip_set_gid_table(struct rtw_dev *rtwdev,
+					  struct ieee80211_vif *vif,
+					  struct ieee80211_bss_conf *conf)
+{
+	if (rtwdev->chip->ops->set_gid_table)
+		rtwdev->chip->ops->set_gid_table(rtwdev, vif, conf);
+}
+
+static inline void rtw_chip_cfg_csi_rate(struct rtw_dev *rtwdev, u8 rssi, u8 cur_rate,
+					 u8 fixrate_en, u8 *new_rate)
+{
+	if (rtwdev->chip->ops->cfg_csi_rate)
+		rtwdev->chip->ops->cfg_csi_rate(rtwdev, rssi, cur_rate,
+						fixrate_en, new_rate);
+}
 #endif
diff --git a/drivers/net/wireless/realtek/rtw88/efuse.c b/drivers/net/wireless/realtek/rtw88/efuse.c
index 212c8376a8c9..13d1c58d6de5 100644
--- a/drivers/net/wireless/realtek/rtw88/efuse.c
+++ b/drivers/net/wireless/realtek/rtw88/efuse.c
@@ -2,6 +2,8 @@
 /* Copyright(c) 2018-2019  Realtek Corporation
  */
 
+#include <linux/iopoll.h>
+
 #include "main.h"
 #include "efuse.h"
 #include "reg.h"
@@ -90,6 +92,8 @@ static int rtw_dump_physical_efuse_map(struct rtw_dev *rtwdev, u8 *map)
 	u32 addr;
 	u32 cnt;
 
+	rtw_chip_efuse_grant_on(rtwdev);
+
 	switch_efuse_bank(rtwdev);
 
 	/* disable 2.5V LDO */
@@ -113,6 +117,28 @@ static int rtw_dump_physical_efuse_map(struct rtw_dev *rtwdev, u8 *map)
 		*(map + addr) = (u8)(efuse_ctl & BIT_MASK_EF_DATA);
 	}
 
+	rtw_chip_efuse_grant_off(rtwdev);
+
+	return 0;
+}
+
+int rtw_read8_physical_efuse(struct rtw_dev *rtwdev, u16 addr, u8 *data)
+{
+	u32 efuse_ctl;
+	int ret;
+
+	rtw_write32_mask(rtwdev, REG_EFUSE_CTRL, 0x3ff00, addr);
+	rtw_write32_clr(rtwdev, REG_EFUSE_CTRL, BIT_EF_FLAG);
+
+	ret = read_poll_timeout(rtw_read32, efuse_ctl, efuse_ctl & BIT_EF_FLAG,
+				1000, 100000, false, rtwdev, REG_EFUSE_CTRL);
+	if (ret) {
+		*data = EFUSE_READ_FAIL;
+		return ret;
+	}
+
+	*data = rtw_read8(rtwdev, REG_EFUSE_CTRL);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/realtek/rtw88/efuse.h b/drivers/net/wireless/realtek/rtw88/efuse.h
index 115bbe85946a..97a51f0b0e46 100644
--- a/drivers/net/wireless/realtek/rtw88/efuse.h
+++ b/drivers/net/wireless/realtek/rtw88/efuse.h
@@ -10,6 +10,8 @@
 #define EFUSE_HW_CAP_SUPP_BW80		7
 #define EFUSE_HW_CAP_SUPP_BW40		6
 
+#define EFUSE_READ_FAIL			0xff
+
 #define GET_EFUSE_HW_CAP_HCI(hw_cap)					       \
 	le32_get_bits(*((__le32 *)(hw_cap) + 0x01), GENMASK(3, 0))
 #define GET_EFUSE_HW_CAP_BW(hw_cap)					       \
@@ -22,5 +24,6 @@
 	le32_get_bits(*((__le32 *)(hw_cap) + 0x01), GENMASK(27, 26))
 
 int rtw_parse_efuse_map(struct rtw_dev *rtwdev);
+int rtw_read8_physical_efuse(struct rtw_dev *rtwdev, u16 addr, u8 *data);
 
 #endif
diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
index 05c430b3489c..dde7823143ea 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.c
+++ b/drivers/net/wireless/realtek/rtw88/fw.c
@@ -2,6 +2,8 @@
 /* Copyright(c) 2018-2019  Realtek Corporation
  */
 
+#include <linux/iopoll.h>
+
 #include "main.h"
 #include "coex.h"
 #include "fw.h"
@@ -193,8 +195,8 @@ static void rtw_fw_send_h2c_command(struct rtw_dev *rtwdev,
 	u8 box;
 	u8 box_state;
 	u32 box_reg, box_ex_reg;
-	u32 h2c_wait;
 	int idx;
+	int ret;
 
 	rtw_dbg(rtwdev, RTW_DBG_FW,
 		"send H2C content %02x%02x%02x%02x %02x%02x%02x%02x\n",
@@ -226,12 +228,11 @@ static void rtw_fw_send_h2c_command(struct rtw_dev *rtwdev,
 		goto out;
 	}
 
-	h2c_wait = 20;
-	do {
-		box_state = rtw_read8(rtwdev, REG_HMETFR);
-	} while ((box_state >> box) & 0x1 && --h2c_wait > 0);
+	ret = read_poll_timeout(rtw_read8, box_state,
+				!((box_state >> box) & 0x1), 100, 3000, false,
+				rtwdev, REG_HMETFR);
 
-	if (!h2c_wait) {
+	if (ret) {
 		rtw_err(rtwdev, "failed to send h2c command\n");
 		goto out;
 	}
@@ -270,6 +271,9 @@ rtw_fw_send_general_info(struct rtw_dev *rtwdev)
 	u8 h2c_pkt[H2C_PKT_SIZE] = {0};
 	u16 total_size = H2C_PKT_HDR_SIZE + 4;
 
+	if (rtw_chip_wcpu_11n(rtwdev))
+		return;
+
 	rtw_h2c_pkt_set_header(h2c_pkt, H2C_PKT_GENERAL_INFO);
 
 	SET_PKT_H2C_TOTAL_LEN(h2c_pkt, total_size);
@@ -290,6 +294,9 @@ rtw_fw_send_phydm_info(struct rtw_dev *rtwdev)
 	u16 total_size = H2C_PKT_HDR_SIZE + 8;
 	u8 fw_rf_type = 0;
 
+	if (rtw_chip_wcpu_11n(rtwdev))
+		return;
+
 	if (hal->rf_type == RF_1T1R)
 		fw_rf_type = FW_RF_1T1R;
 	else if (hal->rf_type == RF_2T2R)
@@ -630,8 +637,8 @@ void rtw_fw_set_pg_info(struct rtw_dev *rtwdev)
 	rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
 }
 
-u8 rtw_get_rsvd_page_probe_req_location(struct rtw_dev *rtwdev,
-					struct cfg80211_ssid *ssid)
+static u8 rtw_get_rsvd_page_probe_req_location(struct rtw_dev *rtwdev,
+					       struct cfg80211_ssid *ssid)
 {
 	struct rtw_rsvd_page *rsvd_pkt;
 	u8 location = 0;
@@ -647,8 +654,8 @@ u8 rtw_get_rsvd_page_probe_req_location(struct rtw_dev *rtwdev,
 	return location;
 }
 
-u16 rtw_get_rsvd_page_probe_req_size(struct rtw_dev *rtwdev,
-				     struct cfg80211_ssid *ssid)
+static u16 rtw_get_rsvd_page_probe_req_size(struct rtw_dev *rtwdev,
+					    struct cfg80211_ssid *ssid)
 {
 	struct rtw_rsvd_page *rsvd_pkt;
 	u16 size = 0;
@@ -1078,6 +1085,8 @@ int rtw_fw_write_data_rsvd_page(struct rtw_dev *rtwdev, u16 pg_addr,
 	u8 bckp[2];
 	u8 val;
 	u16 rsvd_pg_head;
+	u32 bcn_valid_addr;
+	u32 bcn_valid_mask;
 	int ret;
 
 	lockdep_assert_held(&rtwdev->mutex);
@@ -1085,8 +1094,13 @@ int rtw_fw_write_data_rsvd_page(struct rtw_dev *rtwdev, u16 pg_addr,
 	if (!size)
 		return -EINVAL;
 
-	pg_addr &= BIT_MASK_BCN_HEAD_1_V1;
-	rtw_write16(rtwdev, REG_FIFOPAGE_CTRL_2, pg_addr | BIT_BCN_VALID_V1);
+	if (rtw_chip_wcpu_11n(rtwdev)) {
+		rtw_write32_set(rtwdev, REG_DWBCN0_CTRL, BIT_BCN_VALID);
+	} else {
+		pg_addr &= BIT_MASK_BCN_HEAD_1_V1;
+		pg_addr |= BIT_BCN_VALID_V1;
+		rtw_write16(rtwdev, REG_FIFOPAGE_CTRL_2, pg_addr);
+	}
 
 	val = rtw_read8(rtwdev, REG_CR + 1);
 	bckp[0] = val;
@@ -1104,7 +1118,15 @@ int rtw_fw_write_data_rsvd_page(struct rtw_dev *rtwdev, u16 pg_addr,
 		goto restore;
 	}
 
-	if (!check_hw_ready(rtwdev, REG_FIFOPAGE_CTRL_2, BIT_BCN_VALID_V1, 1)) {
+	if (rtw_chip_wcpu_11n(rtwdev)) {
+		bcn_valid_addr = REG_DWBCN0_CTRL;
+		bcn_valid_mask = BIT_BCN_VALID;
+	} else {
+		bcn_valid_addr = REG_FIFOPAGE_CTRL_2;
+		bcn_valid_mask = BIT_BCN_VALID_V1;
+	}
+
+	if (!check_hw_ready(rtwdev, bcn_valid_addr, bcn_valid_mask, 1)) {
 		rtw_err(rtwdev, "error beacon valid\n");
 		ret = -EBUSY;
 	}
diff --git a/drivers/net/wireless/realtek/rtw88/fw.h b/drivers/net/wireless/realtek/rtw88/fw.h
index cdd244857048..2933ef741e53 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.h
+++ b/drivers/net/wireless/realtek/rtw88/fw.h
@@ -19,6 +19,12 @@
 #define RSVD_PAGE_START_ADDR		0x780
 #define FIFO_DUMP_ADDR			0x8000
 
+#define DLFW_PAGE_SIZE_SHIFT_LEGACY	12
+#define DLFW_PAGE_SIZE_LEGACY		0x1000
+#define DLFW_BLK_SIZE_SHIFT_LEGACY	2
+#define DLFW_BLK_SIZE_LEGACY		4
+#define FW_START_ADDR_LEGACY		0x1000
+
 enum rtw_c2h_cmd_id {
 	C2H_BT_INFO = 0x09,
 	C2H_BT_MP_INFO = 0x0b,
@@ -192,6 +198,25 @@ struct rtw_fw_hdr {
 	__le32 imem_addr;
 } __packed;
 
+struct rtw_fw_hdr_legacy {
+	__le16 signature;
+	u8 category;
+	u8 function;
+	__le16 version;	/* 0x04 */
+	u8 subversion1;
+	u8 subversion2;
+	u8 month;	/* 0x08 */
+	u8 day;
+	u8 hour;
+	u8 minute;
+	__le16 size;
+	__le16 rsvd2;
+	__le32 idx;	/* 0x10 */
+	__le32 rsvd3;
+	__le32 rsvd4;	/* 0x18 */
+	__le32 rsvd5;
+} __packed;
+
 /* C2H */
 #define GET_CCX_REPORT_SEQNUM(c2h_payload)	(c2h_payload[8] & 0xfc)
 #define GET_CCX_REPORT_STATUS(c2h_payload)	(c2h_payload[9] & 0xc0)
diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c
index 7b245779ff90..6969379ba37e 100644
--- a/drivers/net/wireless/realtek/rtw88/mac.c
+++ b/drivers/net/wireless/realtek/rtw88/mac.c
@@ -61,6 +61,14 @@ static int rtw_mac_pre_system_cfg(struct rtw_dev *rtwdev)
 
 	rtw_write8(rtwdev, REG_RSV_CTRL, 0);
 
+	if (rtw_chip_wcpu_11n(rtwdev)) {
+		if (rtw_read32(rtwdev, REG_SYS_CFG1) & BIT_LDO)
+			rtw_write8(rtwdev, REG_LDO_SWR_CTRL, LDO_SEL);
+		else
+			rtw_write8(rtwdev, REG_LDO_SWR_CTRL, SPS_SEL);
+		return 0;
+	}
+
 	switch (rtw_hci_type(rtwdev)) {
 	case RTW_HCI_TYPE_PCIE:
 		rtw_write32_set(rtwdev, REG_HCI_OPT_CTRL, BIT_BT_DIG_CLK_EN);
@@ -100,42 +108,55 @@ static int rtw_mac_pre_system_cfg(struct rtw_dev *rtwdev)
 	return 0;
 }
 
+static bool do_pwr_poll_cmd(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 target)
+{
+	u32 cnt;
+
+	target &= mask;
+
+	for (cnt = 0; cnt < RTW_PWR_POLLING_CNT; cnt++) {
+		if ((rtw_read8(rtwdev, addr) & mask) == target)
+			return true;
+
+		udelay(50);
+	}
+
+	return false;
+}
+
 static int rtw_pwr_cmd_polling(struct rtw_dev *rtwdev,
 			       const struct rtw_pwr_seq_cmd *cmd)
 {
 	u8 value;
-	u8 flag = 0;
 	u32 offset;
-	u32 cnt = RTW_PWR_POLLING_CNT;
 
 	if (cmd->base == RTW_PWR_ADDR_SDIO)
 		offset = cmd->offset | SDIO_LOCAL_OFFSET;
 	else
 		offset = cmd->offset;
 
-	do {
-		cnt--;
-		value = rtw_read8(rtwdev, offset);
-		value &= cmd->mask;
-		if (value == (cmd->value & cmd->mask))
-			return 0;
-		if (cnt == 0) {
-			if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_PCIE &&
-			    flag == 0) {
-				value = rtw_read8(rtwdev, REG_SYS_PW_CTRL);
-				value |= BIT(3);
-				rtw_write8(rtwdev, REG_SYS_PW_CTRL, value);
-				value &= ~BIT(3);
-				rtw_write8(rtwdev, REG_SYS_PW_CTRL, value);
-				cnt = RTW_PWR_POLLING_CNT;
-				flag = 1;
-			} else {
-				return -EBUSY;
-			}
-		} else {
-			udelay(50);
-		}
-	} while (1);
+	if (do_pwr_poll_cmd(rtwdev, offset, cmd->mask, cmd->value))
+		return 0;
+
+	if (rtw_hci_type(rtwdev) != RTW_HCI_TYPE_PCIE)
+		goto err;
+
+	/* if PCIE, toggle BIT_PFM_WOWL and try again */
+	value = rtw_read8(rtwdev, REG_SYS_PW_CTRL);
+	if (rtwdev->chip->id == RTW_CHIP_TYPE_8723D)
+		rtw_write8(rtwdev, REG_SYS_PW_CTRL, value & ~BIT_PFM_WOWL);
+	rtw_write8(rtwdev, REG_SYS_PW_CTRL, value | BIT_PFM_WOWL);
+	rtw_write8(rtwdev, REG_SYS_PW_CTRL, value & ~BIT_PFM_WOWL);
+	if (rtwdev->chip->id == RTW_CHIP_TYPE_8723D)
+		rtw_write8(rtwdev, REG_SYS_PW_CTRL, value | BIT_PFM_WOWL);
+
+	if (do_pwr_poll_cmd(rtwdev, offset, cmd->mask, cmd->value))
+		return 0;
+
+err:
+	rtw_err(rtwdev, "failed to poll offset=0x%x mask=0x%x value=0x%x\n",
+		offset, cmd->mask, cmd->value);
+	return -EBUSY;
 }
 
 static int rtw_sub_pwr_seq_parser(struct rtw_dev *rtwdev, u8 intf_mask,
@@ -228,12 +249,14 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
 	u8 rpwm;
 	bool cur_pwr;
 
-	rpwm = rtw_read8(rtwdev, rtwdev->hci.rpwm_addr);
+	if (rtw_chip_wcpu_11ac(rtwdev)) {
+		rpwm = rtw_read8(rtwdev, rtwdev->hci.rpwm_addr);
 
-	/* Check FW still exist or not */
-	if (rtw_read16(rtwdev, REG_MCUFW_CTRL) == 0xC078) {
-		rpwm = (rpwm ^ BIT_RPWM_TOGGLE) & BIT_RPWM_TOGGLE;
-		rtw_write8(rtwdev, rtwdev->hci.rpwm_addr, rpwm);
+		/* Check FW still exist or not */
+		if (rtw_read16(rtwdev, REG_MCUFW_CTRL) == 0xC078) {
+			rpwm = (rpwm ^ BIT_RPWM_TOGGLE) & BIT_RPWM_TOGGLE;
+			rtw_write8(rtwdev, rtwdev->hci.rpwm_addr, rpwm);
+		}
 	}
 
 	if (rtw_read8(rtwdev, REG_CR) == 0xea)
@@ -244,7 +267,7 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
 	else
 		cur_pwr = true;
 
-	if (pwr_on && cur_pwr)
+	if (pwr_on == cur_pwr)
 		return -EALREADY;
 
 	pwr_seq = pwr_on ? chip->pwr_on_seq : chip->pwr_off_seq;
@@ -254,7 +277,7 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
 	return 0;
 }
 
-static int rtw_mac_init_system_cfg(struct rtw_dev *rtwdev)
+static int __rtw_mac_init_system_cfg(struct rtw_dev *rtwdev)
 {
 	u8 sys_func_en = rtwdev->chip->sys_func_en;
 	u8 value8;
@@ -279,6 +302,29 @@ static int rtw_mac_init_system_cfg(struct rtw_dev *rtwdev)
 	return 0;
 }
 
+static int __rtw_mac_init_system_cfg_legacy(struct rtw_dev *rtwdev)
+{
+	rtw_write8(rtwdev, REG_CR, 0xff);
+	mdelay(2);
+	rtw_write8(rtwdev, REG_HWSEQ_CTRL, 0x7f);
+	mdelay(2);
+
+	rtw_write8_set(rtwdev, REG_SYS_CLKR, BIT_WAKEPAD_EN);
+	rtw_write16_clr(rtwdev, REG_GPIO_MUXCFG, BIT_EN_SIC);
+
+	rtw_write16(rtwdev, REG_CR, 0x2ff);
+
+	return 0;
+}
+
+static int rtw_mac_init_system_cfg(struct rtw_dev *rtwdev)
+{
+	if (rtw_chip_wcpu_11n(rtwdev))
+		return __rtw_mac_init_system_cfg_legacy(rtwdev);
+
+	return __rtw_mac_init_system_cfg(rtwdev);
+}
+
 int rtw_mac_power_on(struct rtw_dev *rtwdev)
 {
 	int ret = 0;
@@ -650,7 +696,8 @@ static void download_firmware_end_flow(struct rtw_dev *rtwdev)
 	rtw_write16(rtwdev, REG_MCUFW_CTRL, fw_ctrl);
 }
 
-int rtw_download_firmware(struct rtw_dev *rtwdev, struct rtw_fw_state *fw)
+static int __rtw_download_firmware(struct rtw_dev *rtwdev,
+				   struct rtw_fw_state *fw)
 {
 	struct rtw_backup_info bckp[DLFW_RESTORE_REG_NUM];
 	const u8 *data = fw->firmware->data;
@@ -704,6 +751,151 @@ int rtw_download_firmware(struct rtw_dev *rtwdev, struct rtw_fw_state *fw)
 	return ret;
 }
 
+static void en_download_firmware_legacy(struct rtw_dev *rtwdev, bool en)
+{
+	int try;
+
+	if (en) {
+		wlan_cpu_enable(rtwdev, false);
+		wlan_cpu_enable(rtwdev, true);
+
+		rtw_write8_set(rtwdev, REG_MCUFW_CTRL, BIT_MCUFWDL_EN);
+
+		for (try = 0; try < 10; try++) {
+			if (rtw_read8(rtwdev, REG_MCUFW_CTRL) & BIT_MCUFWDL_EN)
+				goto fwdl_ready;
+			rtw_write8_set(rtwdev, REG_MCUFW_CTRL, BIT_MCUFWDL_EN);
+			msleep(20);
+		}
+		rtw_err(rtwdev, "failed to check fw download ready\n");
+fwdl_ready:
+		rtw_write32_clr(rtwdev, REG_MCUFW_CTRL, BIT_ROM_DLEN);
+	} else {
+		rtw_write8_clr(rtwdev, REG_MCUFW_CTRL, BIT_MCUFWDL_EN);
+	}
+}
+
+static void
+write_firmware_page(struct rtw_dev *rtwdev, u32 page, const u8 *data, u32 size)
+{
+	u32 val32;
+	u32 block_nr;
+	u32 remain_size;
+	u32 write_addr = FW_START_ADDR_LEGACY;
+	const __le32 *ptr = (const __le32 *)data;
+	u32 block;
+	__le32 remain_data = 0;
+
+	block_nr = size >> DLFW_BLK_SIZE_SHIFT_LEGACY;
+	remain_size = size & (DLFW_BLK_SIZE_LEGACY - 1);
+
+	val32 = rtw_read32(rtwdev, REG_MCUFW_CTRL);
+	val32 &= ~BIT_ROM_PGE;
+	val32 |= (page << BIT_SHIFT_ROM_PGE) & BIT_ROM_PGE;
+	rtw_write32(rtwdev, REG_MCUFW_CTRL, val32);
+
+	for (block = 0; block < block_nr; block++) {
+		rtw_write32(rtwdev, write_addr, le32_to_cpu(*ptr));
+
+		write_addr += DLFW_BLK_SIZE_LEGACY;
+		ptr++;
+	}
+
+	if (remain_size) {
+		memcpy(&remain_data, ptr, remain_size);
+		rtw_write32(rtwdev, write_addr, le32_to_cpu(remain_data));
+	}
+}
+
+static int
+download_firmware_legacy(struct rtw_dev *rtwdev, const u8 *data, u32 size)
+{
+	u32 page;
+	u32 total_page;
+	u32 last_page_size;
+
+	data += sizeof(struct rtw_fw_hdr_legacy);
+	size -= sizeof(struct rtw_fw_hdr_legacy);
+
+	total_page = size >> DLFW_PAGE_SIZE_SHIFT_LEGACY;
+	last_page_size = size & (DLFW_PAGE_SIZE_LEGACY - 1);
+
+	rtw_write8_set(rtwdev, REG_MCUFW_CTRL, BIT_FWDL_CHK_RPT);
+
+	for (page = 0; page < total_page; page++) {
+		write_firmware_page(rtwdev, page, data, DLFW_PAGE_SIZE_LEGACY);
+		data += DLFW_PAGE_SIZE_LEGACY;
+	}
+	if (last_page_size)
+		write_firmware_page(rtwdev, page, data, last_page_size);
+
+	if (!check_hw_ready(rtwdev, REG_MCUFW_CTRL, BIT_FWDL_CHK_RPT, 1)) {
+		rtw_err(rtwdev, "failed to check download fimrware report\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int download_firmware_validate_legacy(struct rtw_dev *rtwdev)
+{
+	u32 val32;
+	int try;
+
+	val32 = rtw_read32(rtwdev, REG_MCUFW_CTRL);
+	val32 |= BIT_MCUFWDL_RDY;
+	val32 &= ~BIT_WINTINI_RDY;
+	rtw_write32(rtwdev, REG_MCUFW_CTRL, val32);
+
+	wlan_cpu_enable(rtwdev, false);
+	wlan_cpu_enable(rtwdev, true);
+
+	for (try = 0; try < 10; try++) {
+		val32 = rtw_read32(rtwdev, REG_MCUFW_CTRL);
+		if ((val32 & FW_READY_LEGACY) == FW_READY_LEGACY)
+			return 0;
+		msleep(20);
+	}
+
+	rtw_err(rtwdev, "failed to validate fimrware\n");
+	return -EINVAL;
+}
+
+static int __rtw_download_firmware_legacy(struct rtw_dev *rtwdev,
+					  struct rtw_fw_state *fw)
+{
+	int ret = 0;
+
+	en_download_firmware_legacy(rtwdev, true);
+	ret = download_firmware_legacy(rtwdev, fw->firmware->data, fw->firmware->size);
+	en_download_firmware_legacy(rtwdev, false);
+	if (ret)
+		goto out;
+
+	ret = download_firmware_validate_legacy(rtwdev);
+	if (ret)
+		goto out;
+
+	/* reset desc and index */
+	rtw_hci_setup(rtwdev);
+
+	rtwdev->h2c.last_box_num = 0;
+	rtwdev->h2c.seq = 0;
+
+	set_bit(RTW_FLAG_FW_RUNNING, rtwdev->flags);
+
+out:
+	return ret;
+}
+
+int rtw_download_firmware(struct rtw_dev *rtwdev, struct rtw_fw_state *fw)
+{
+	if (rtw_chip_wcpu_11n(rtwdev))
+		return __rtw_download_firmware_legacy(rtwdev, fw);
+
+	return __rtw_download_firmware(rtwdev, fw);
+}
+
 static u32 get_priority_queues(struct rtw_dev *rtwdev, u32 queues)
 {
 	const struct rtw_rqpn *rqpn = rtwdev->fifo.rqpn;
@@ -826,7 +1018,8 @@ static int txdma_queue_mapping(struct rtw_dev *rtwdev)
 
 	rtw_write8(rtwdev, REG_CR, 0);
 	rtw_write8(rtwdev, REG_CR, MAC_TRX_ENABLE);
-	rtw_write32(rtwdev, REG_H2CQ_CSR, BIT_H2CQ_FULL);
+	if (rtw_chip_wcpu_11ac(rtwdev))
+		rtw_write32(rtwdev, REG_H2CQ_CSR, BIT_H2CQ_FULL);
 
 	return 0;
 }
@@ -841,13 +1034,16 @@ static int set_trx_fifo_info(struct rtw_dev *rtwdev)
 	/* config rsvd page num */
 	fifo->rsvd_drv_pg_num = 8;
 	fifo->txff_pg_num = chip->txff_size >> 7;
-	fifo->rsvd_pg_num = fifo->rsvd_drv_pg_num +
-			   RSVD_PG_H2C_EXTRAINFO_NUM +
-			   RSVD_PG_H2C_STATICINFO_NUM +
-			   RSVD_PG_H2CQ_NUM +
-			   RSVD_PG_CPU_INSTRUCTION_NUM +
-			   RSVD_PG_FW_TXBUF_NUM +
-			   csi_buf_pg_num;
+	if (rtw_chip_wcpu_11n(rtwdev))
+		fifo->rsvd_pg_num = fifo->rsvd_drv_pg_num;
+	else
+		fifo->rsvd_pg_num = fifo->rsvd_drv_pg_num +
+				   RSVD_PG_H2C_EXTRAINFO_NUM +
+				   RSVD_PG_H2C_STATICINFO_NUM +
+				   RSVD_PG_H2CQ_NUM +
+				   RSVD_PG_CPU_INSTRUCTION_NUM +
+				   RSVD_PG_FW_TXBUF_NUM +
+				   csi_buf_pg_num;
 
 	if (fifo->rsvd_pg_num > fifo->txff_pg_num)
 		return -ENOMEM;
@@ -856,18 +1052,20 @@ static int set_trx_fifo_info(struct rtw_dev *rtwdev)
 	fifo->rsvd_boundary = fifo->txff_pg_num - fifo->rsvd_pg_num;
 
 	cur_pg_addr = fifo->txff_pg_num;
-	cur_pg_addr -= csi_buf_pg_num;
-	fifo->rsvd_csibuf_addr = cur_pg_addr;
-	cur_pg_addr -= RSVD_PG_FW_TXBUF_NUM;
-	fifo->rsvd_fw_txbuf_addr = cur_pg_addr;
-	cur_pg_addr -= RSVD_PG_CPU_INSTRUCTION_NUM;
-	fifo->rsvd_cpu_instr_addr = cur_pg_addr;
-	cur_pg_addr -= RSVD_PG_H2CQ_NUM;
-	fifo->rsvd_h2cq_addr = cur_pg_addr;
-	cur_pg_addr -= RSVD_PG_H2C_STATICINFO_NUM;
-	fifo->rsvd_h2c_sta_info_addr = cur_pg_addr;
-	cur_pg_addr -= RSVD_PG_H2C_EXTRAINFO_NUM;
-	fifo->rsvd_h2c_info_addr = cur_pg_addr;
+	if (rtw_chip_wcpu_11ac(rtwdev)) {
+		cur_pg_addr -= csi_buf_pg_num;
+		fifo->rsvd_csibuf_addr = cur_pg_addr;
+		cur_pg_addr -= RSVD_PG_FW_TXBUF_NUM;
+		fifo->rsvd_fw_txbuf_addr = cur_pg_addr;
+		cur_pg_addr -= RSVD_PG_CPU_INSTRUCTION_NUM;
+		fifo->rsvd_cpu_instr_addr = cur_pg_addr;
+		cur_pg_addr -= RSVD_PG_H2CQ_NUM;
+		fifo->rsvd_h2cq_addr = cur_pg_addr;
+		cur_pg_addr -= RSVD_PG_H2C_STATICINFO_NUM;
+		fifo->rsvd_h2c_sta_info_addr = cur_pg_addr;
+		cur_pg_addr -= RSVD_PG_H2C_EXTRAINFO_NUM;
+		fifo->rsvd_h2c_info_addr = cur_pg_addr;
+	}
 	cur_pg_addr -= fifo->rsvd_drv_pg_num;
 	fifo->rsvd_drv_addr = cur_pg_addr;
 
@@ -879,6 +1077,65 @@ static int set_trx_fifo_info(struct rtw_dev *rtwdev)
 	return 0;
 }
 
+static int __priority_queue_cfg(struct rtw_dev *rtwdev,
+				const struct rtw_page_table *pg_tbl,
+				u16 pubq_num)
+{
+	struct rtw_fifo_conf *fifo = &rtwdev->fifo;
+	struct rtw_chip_info *chip = rtwdev->chip;
+
+	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_1, pg_tbl->hq_num);
+	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_2, pg_tbl->lq_num);
+	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_3, pg_tbl->nq_num);
+	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_4, pg_tbl->exq_num);
+	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_5, pubq_num);
+	rtw_write32_set(rtwdev, REG_RQPN_CTRL_2, BIT_LD_RQPN);
+
+	rtw_write16(rtwdev, REG_FIFOPAGE_CTRL_2, fifo->rsvd_boundary);
+	rtw_write8_set(rtwdev, REG_FWHW_TXQ_CTRL + 2, BIT_EN_WR_FREE_TAIL >> 16);
+
+	rtw_write16(rtwdev, REG_BCNQ_BDNY_V1, fifo->rsvd_boundary);
+	rtw_write16(rtwdev, REG_FIFOPAGE_CTRL_2 + 2, fifo->rsvd_boundary);
+	rtw_write16(rtwdev, REG_BCNQ1_BDNY_V1, fifo->rsvd_boundary);
+	rtw_write32(rtwdev, REG_RXFF_BNDY, chip->rxff_size - C2H_PKT_BUF - 1);
+	rtw_write8_set(rtwdev, REG_AUTO_LLT_V1, BIT_AUTO_INIT_LLT_V1);
+
+	if (!check_hw_ready(rtwdev, REG_AUTO_LLT_V1, BIT_AUTO_INIT_LLT_V1, 0))
+		return -EBUSY;
+
+	rtw_write8(rtwdev, REG_CR + 3, 0);
+
+	return 0;
+}
+
+static int __priority_queue_cfg_legacy(struct rtw_dev *rtwdev,
+				       const struct rtw_page_table *pg_tbl,
+				       u16 pubq_num)
+{
+	struct rtw_fifo_conf *fifo = &rtwdev->fifo;
+	struct rtw_chip_info *chip = rtwdev->chip;
+	u32 val32;
+
+	val32 = BIT_RQPN_NE(pg_tbl->nq_num, pg_tbl->exq_num);
+	rtw_write32(rtwdev, REG_RQPN_NPQ, val32);
+	val32 = BIT_RQPN_HLP(pg_tbl->hq_num, pg_tbl->lq_num, pubq_num);
+	rtw_write32(rtwdev, REG_RQPN, val32);
+
+	rtw_write8(rtwdev, REG_TRXFF_BNDY, fifo->rsvd_boundary);
+	rtw_write16(rtwdev, REG_TRXFF_BNDY + 2, chip->rxff_size - REPORT_BUF - 1);
+	rtw_write8(rtwdev, REG_DWBCN0_CTRL + 1, fifo->rsvd_boundary);
+	rtw_write8(rtwdev, REG_BCNQ_BDNY, fifo->rsvd_boundary);
+	rtw_write8(rtwdev, REG_MGQ_BDNY, fifo->rsvd_boundary);
+	rtw_write8(rtwdev, REG_WMAC_LBK_BF_HD, fifo->rsvd_boundary);
+
+	rtw_write32_set(rtwdev, REG_AUTO_LLT, BIT_AUTO_INIT_LLT);
+
+	if (!check_hw_ready(rtwdev, REG_AUTO_LLT, BIT_AUTO_INIT_LLT, 0))
+		return -EBUSY;
+
+	return 0;
+}
+
 static int priority_queue_cfg(struct rtw_dev *rtwdev)
 {
 	struct rtw_fifo_conf *fifo = &rtwdev->fifo;
@@ -911,28 +1168,10 @@ static int priority_queue_cfg(struct rtw_dev *rtwdev)
 
 	pubq_num = fifo->acq_pg_num - pg_tbl->hq_num - pg_tbl->lq_num -
 		   pg_tbl->nq_num - pg_tbl->exq_num - pg_tbl->gapq_num;
-	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_1, pg_tbl->hq_num);
-	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_2, pg_tbl->lq_num);
-	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_3, pg_tbl->nq_num);
-	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_4, pg_tbl->exq_num);
-	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_5, pubq_num);
-	rtw_write32_set(rtwdev, REG_RQPN_CTRL_2, BIT_LD_RQPN);
-
-	rtw_write16(rtwdev, REG_FIFOPAGE_CTRL_2, fifo->rsvd_boundary);
-	rtw_write8_set(rtwdev, REG_FWHW_TXQ_CTRL + 2, BIT_EN_WR_FREE_TAIL >> 16);
-
-	rtw_write16(rtwdev, REG_BCNQ_BDNY_V1, fifo->rsvd_boundary);
-	rtw_write16(rtwdev, REG_FIFOPAGE_CTRL_2 + 2, fifo->rsvd_boundary);
-	rtw_write16(rtwdev, REG_BCNQ1_BDNY_V1, fifo->rsvd_boundary);
-	rtw_write32(rtwdev, REG_RXFF_BNDY, chip->rxff_size - C2H_PKT_BUF - 1);
-	rtw_write8_set(rtwdev, REG_AUTO_LLT_V1, BIT_AUTO_INIT_LLT_V1);
-
-	if (!check_hw_ready(rtwdev, REG_AUTO_LLT_V1, BIT_AUTO_INIT_LLT_V1, 0))
-		return -EBUSY;
-
-	rtw_write8(rtwdev, REG_CR + 3, 0);
-
-	return 0;
+	if (rtw_chip_wcpu_11n(rtwdev))
+		return __priority_queue_cfg_legacy(rtwdev, pg_tbl, pubq_num);
+	else
+		return __priority_queue_cfg(rtwdev, pg_tbl, pubq_num);
 }
 
 static int init_h2c(struct rtw_dev *rtwdev)
@@ -945,6 +1184,9 @@ static int init_h2c(struct rtw_dev *rtwdev)
 	u32 h2cq_free;
 	u32 wp, rp;
 
+	if (rtw_chip_wcpu_11n(rtwdev))
+		return 0;
+
 	h2cq_addr = fifo->rsvd_h2cq_addr << TX_PAGE_SIZE_SHIFT;
 	h2cq_size = RSVD_PG_H2CQ_NUM << TX_PAGE_SIZE_SHIFT;
 
@@ -1009,11 +1251,13 @@ static int rtw_drv_info_cfg(struct rtw_dev *rtwdev)
 	u8 value8;
 
 	rtw_write8(rtwdev, REG_RX_DRVINFO_SZ, PHY_STATUS_SIZE);
-	value8 = rtw_read8(rtwdev, REG_TRXFF_BNDY + 1);
-	value8 &= 0xF0;
-	/* For rxdesc len = 0 issue */
-	value8 |= 0xF;
-	rtw_write8(rtwdev, REG_TRXFF_BNDY + 1, value8);
+	if (rtw_chip_wcpu_11ac(rtwdev)) {
+		value8 = rtw_read8(rtwdev, REG_TRXFF_BNDY + 1);
+		value8 &= 0xF0;
+		/* For rxdesc len = 0 issue */
+		value8 |= 0xF;
+		rtw_write8(rtwdev, REG_TRXFF_BNDY + 1, value8);
+	}
 	rtw_write32_set(rtwdev, REG_RCR, BIT_APP_PHYSTS);
 	rtw_write32_clr(rtwdev, REG_WMAC_OPTION_FUNCTION + 4, BIT(8) | BIT(9));
 
diff --git a/drivers/net/wireless/realtek/rtw88/mac.h b/drivers/net/wireless/realtek/rtw88/mac.h
index 592dc830160c..ce64cdf7a565 100644
--- a/drivers/net/wireless/realtek/rtw88/mac.h
+++ b/drivers/net/wireless/realtek/rtw88/mac.h
@@ -10,6 +10,7 @@
 #define SDIO_LOCAL_OFFSET	0x10250000
 #define DDMA_POLLING_COUNT	1000
 #define C2H_PKT_BUF		256
+#define REPORT_BUF		128
 #define PHY_STATUS_SIZE		4
 #define ILLEGAL_KEY_GROUP	0xFAAAAA00
 
diff --git a/drivers/net/wireless/realtek/rtw88/mac80211.c b/drivers/net/wireless/realtek/rtw88/mac80211.c
index d7d02e4c0184..98d2ac22f6f6 100644
--- a/drivers/net/wireless/realtek/rtw88/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw88/mac80211.c
@@ -375,11 +375,8 @@ static void rtw_ops_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_BEACON)
 		rtw_fw_download_rsvd_page(rtwdev);
 
-	if (changed & BSS_CHANGED_MU_GROUPS) {
-		struct rtw_chip_info *chip = rtwdev->chip;
-
-		chip->ops->set_gid_table(rtwdev, vif, conf);
-	}
+	if (changed & BSS_CHANGED_MU_GROUPS)
+		rtw_chip_set_gid_table(rtwdev, vif, conf);
 
 	if (changed & BSS_CHANGED_ERP_SLOT)
 		rtw_conf_tx(rtwdev, rtwvif);
@@ -754,6 +751,37 @@ static int rtw_ops_set_bitrate_mask(struct ieee80211_hw *hw,
 	return 0;
 }
 
+static int rtw_ops_set_antenna(struct ieee80211_hw *hw,
+			       u32 tx_antenna,
+			       u32 rx_antenna)
+{
+	struct rtw_dev *rtwdev = hw->priv;
+	struct rtw_chip_info *chip = rtwdev->chip;
+	int ret;
+
+	if (!chip->ops->set_antenna)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&rtwdev->mutex);
+	ret = chip->ops->set_antenna(rtwdev, tx_antenna, rx_antenna);
+	mutex_unlock(&rtwdev->mutex);
+
+	return ret;
+}
+
+static int rtw_ops_get_antenna(struct ieee80211_hw *hw,
+			       u32 *tx_antenna,
+			       u32 *rx_antenna)
+{
+	struct rtw_dev *rtwdev = hw->priv;
+	struct rtw_hal *hal = &rtwdev->hal;
+
+	*tx_antenna = hal->antenna_tx;
+	*rx_antenna = hal->antenna_rx;
+
+	return 0;
+}
+
 #ifdef CONFIG_PM
 static int rtw_ops_suspend(struct ieee80211_hw *hw,
 			   struct cfg80211_wowlan *wowlan)
@@ -815,6 +843,8 @@ const struct ieee80211_ops rtw_ops = {
 	.sta_statistics		= rtw_ops_sta_statistics,
 	.flush			= rtw_ops_flush,
 	.set_bitrate_mask	= rtw_ops_set_bitrate_mask,
+	.set_antenna		= rtw_ops_set_antenna,
+	.get_antenna		= rtw_ops_get_antenna,
 #ifdef CONFIG_PM
 	.suspend		= rtw_ops_suspend,
 	.resume			= rtw_ops_resume,
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 7640e97706f5..b0dadff0dc7b 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -137,7 +137,6 @@ struct rtw_watch_dog_iter_data {
 static void rtw_dynamic_csi_rate(struct rtw_dev *rtwdev, struct rtw_vif *rtwvif)
 {
 	struct rtw_bf_info *bf_info = &rtwdev->bf_info;
-	struct rtw_chip_info *chip = rtwdev->chip;
 	u8 fix_rate_enable = 0;
 	u8 new_csi_rate_idx;
 
@@ -145,9 +144,9 @@ static void rtw_dynamic_csi_rate(struct rtw_dev *rtwdev, struct rtw_vif *rtwvif)
 	    rtwvif->bfee.role != RTW_BFEE_MU)
 		return;
 
-	chip->ops->cfg_csi_rate(rtwdev, rtwdev->dm_info.min_rssi,
-				bf_info->cur_csi_rpt_rate,
-				fix_rate_enable, &new_csi_rate_idx);
+	rtw_chip_cfg_csi_rate(rtwdev, rtwdev->dm_info.min_rssi,
+			      bf_info->cur_csi_rpt_rate,
+			      fix_rate_enable, &new_csi_rate_idx);
 
 	if (new_csi_rate_idx != bf_info->cur_csi_rpt_rate)
 		bf_info->cur_csi_rpt_rate = new_csi_rate_idx;
@@ -473,6 +472,7 @@ static u8 hw_bw_cap_to_bitamp(u8 bw_cap)
 static void rtw_hw_config_rf_ant_num(struct rtw_dev *rtwdev, u8 hw_ant_num)
 {
 	struct rtw_hal *hal = &rtwdev->hal;
+	struct rtw_chip_info *chip = rtwdev->chip;
 
 	if (hw_ant_num == EFUSE_HW_CAP_IGNORE ||
 	    hw_ant_num >= hal->rf_path_num)
@@ -482,6 +482,8 @@ static void rtw_hw_config_rf_ant_num(struct rtw_dev *rtwdev, u8 hw_ant_num)
 	case 1:
 		hal->rf_type = RF_1T1R;
 		hal->rf_path_num = 1;
+		if (!chip->fix_rf_phy_num)
+			hal->rf_phy_num = hal->rf_path_num;
 		hal->antenna_tx = BB_PATH_A;
 		hal->antenna_rx = BB_PATH_A;
 		break;
@@ -1040,11 +1042,43 @@ static void rtw_unset_supported_band(struct ieee80211_hw *hw,
 	kfree(hw->wiphy->bands[NL80211_BAND_5GHZ]);
 }
 
+static void __update_firmware_info(struct rtw_dev *rtwdev,
+				   struct rtw_fw_state *fw)
+{
+	const struct rtw_fw_hdr *fw_hdr =
+				(const struct rtw_fw_hdr *)fw->firmware->data;
+
+	fw->h2c_version = le16_to_cpu(fw_hdr->h2c_fmt_ver);
+	fw->version = le16_to_cpu(fw_hdr->version);
+	fw->sub_version = fw_hdr->subversion;
+	fw->sub_index = fw_hdr->subindex;
+}
+
+static void __update_firmware_info_legacy(struct rtw_dev *rtwdev,
+					  struct rtw_fw_state *fw)
+{
+	struct rtw_fw_hdr_legacy *legacy =
+				(struct rtw_fw_hdr_legacy *)fw->firmware->data;
+
+	fw->h2c_version = 0;
+	fw->version = le16_to_cpu(legacy->version);
+	fw->sub_version = legacy->subversion1;
+	fw->sub_index = legacy->subversion2;
+}
+
+static void update_firmware_info(struct rtw_dev *rtwdev,
+				 struct rtw_fw_state *fw)
+{
+	if (rtw_chip_wcpu_11n(rtwdev))
+		__update_firmware_info_legacy(rtwdev, fw);
+	else
+		__update_firmware_info(rtwdev, fw);
+}
+
 static void rtw_load_firmware_cb(const struct firmware *firmware, void *context)
 {
 	struct rtw_fw_state *fw = context;
 	struct rtw_dev *rtwdev = fw->rtwdev;
-	const struct rtw_fw_hdr *fw_hdr;
 
 	if (!firmware || !firmware->data) {
 		rtw_err(rtwdev, "failed to request firmware\n");
@@ -1052,13 +1086,8 @@ static void rtw_load_firmware_cb(const struct firmware *firmware, void *context)
 		return;
 	}
 
-	fw_hdr = (const struct rtw_fw_hdr *)firmware->data;
-	fw->h2c_version = le16_to_cpu(fw_hdr->h2c_fmt_ver);
-	fw->version = le16_to_cpu(fw_hdr->version);
-	fw->sub_version = fw_hdr->subversion;
-	fw->sub_index = fw_hdr->subindex;
-
 	fw->firmware = firmware;
+	update_firmware_info(rtwdev, fw);
 	complete_all(&fw->completion);
 
 	rtw_info(rtwdev, "Firmware version %u.%u.%u, H2C version %u\n",
@@ -1131,6 +1160,8 @@ static int rtw_chip_parameter_setup(struct rtw_dev *rtwdev)
 		hal->antenna_tx = BB_PATH_A;
 		hal->antenna_rx = BB_PATH_A;
 	}
+	hal->rf_phy_num = chip->fix_rf_phy_num ? chip->fix_rf_phy_num :
+			  hal->rf_path_num;
 
 	efuse->physical_size = chip->phy_efuse_size;
 	efuse->logical_size = chip->log_efuse_size;
@@ -1450,6 +1481,7 @@ EXPORT_SYMBOL(rtw_core_deinit);
 
 int rtw_register_hw(struct rtw_dev *rtwdev, struct ieee80211_hw *hw)
 {
+	struct rtw_hal *hal = &rtwdev->hal;
 	int max_tx_headroom = 0;
 	int ret;
 
@@ -1478,6 +1510,8 @@ int rtw_register_hw(struct rtw_dev *rtwdev, struct ieee80211_hw *hw)
 				     BIT(NL80211_IFTYPE_AP) |
 				     BIT(NL80211_IFTYPE_ADHOC) |
 				     BIT(NL80211_IFTYPE_MESH_POINT);
+	hw->wiphy->available_antennas_tx = hal->antenna_tx;
+	hw->wiphy->available_antennas_rx = hal->antenna_rx;
 
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS |
 			    WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
diff --git a/drivers/net/wireless/realtek/rtw88/main.h b/drivers/net/wireless/realtek/rtw88/main.h
index c6b590fdb573..157aca641f6d 100644
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -41,6 +41,7 @@ extern unsigned int rtw_debug_mask;
 extern const struct ieee80211_ops rtw_ops;
 extern struct rtw_chip_info rtw8822b_hw_spec;
 extern struct rtw_chip_info rtw8822c_hw_spec;
+extern struct rtw_chip_info rtw8723d_hw_spec;
 
 #define RTW_MAX_CHANNEL_NUM_2G 14
 #define RTW_MAX_CHANNEL_NUM_5G 49
@@ -183,6 +184,7 @@ enum rtw_wireless_set {
 enum rtw_chip_type {
 	RTW_CHIP_TYPE_8822B,
 	RTW_CHIP_TYPE_8822C,
+	RTW_CHIP_TYPE_8723D,
 };
 
 enum rtw_tx_queue_type {
@@ -527,6 +529,13 @@ struct rtw_reg_domain {
 	u8 domain;
 };
 
+struct rtw_rf_sipi_addr {
+	u32 hssi_1;
+	u32 hssi_2;
+	u32 lssi_read;
+	u32 lssi_read_pi;
+};
+
 struct rtw_backup_info {
 	u8 len;
 	u32 reg;
@@ -798,9 +807,11 @@ struct rtw_chip_ops {
 	void (*set_tx_power_index)(struct rtw_dev *rtwdev);
 	int (*rsvd_page_dump)(struct rtw_dev *rtwdev, u8 *buf, u32 offset,
 			      u32 size);
-	void (*set_antenna)(struct rtw_dev *rtwdev, u8 antenna_tx,
-			    u8 antenna_rx);
+	int (*set_antenna)(struct rtw_dev *rtwdev,
+			   u32 antenna_tx,
+			   u32 antenna_rx);
 	void (*cfg_ldo25)(struct rtw_dev *rtwdev, bool enable);
+	void (*efuse_grant)(struct rtw_dev *rtwdev, bool enable);
 	void (*false_alarm_statistics)(struct rtw_dev *rtwdev);
 	void (*phy_calibration)(struct rtw_dev *rtwdev);
 	void (*dpk_track)(struct rtw_dev *rtwdev);
@@ -844,6 +855,7 @@ struct rtw_chip_ops {
 #define RTW_PWR_INTF_PCI_MSK	BIT(2)
 #define RTW_PWR_INTF_ALL_MSK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
 
+#define RTW_PWR_CUT_TEST_MSK	BIT(0)
 #define RTW_PWR_CUT_A_MSK	BIT(1)
 #define RTW_PWR_CUT_B_MSK	BIT(2)
 #define RTW_PWR_CUT_C_MSK	BIT(3)
@@ -1044,12 +1056,18 @@ struct rtw_pwr_track_tbl {
 	const u8 *pwrtrk_2g_ccka_p;
 };
 
+enum rtw_wlan_cpu {
+	RTW_WCPU_11AC,
+	RTW_WCPU_11N,
+};
+
 /* hardware configuration for each IC */
 struct rtw_chip_info {
 	struct rtw_chip_ops *ops;
 	u8 id;
 
 	const char *fw_name;
+	enum rtw_wlan_cpu wlan_cpu;
 	u8 tx_pkt_desc_sz;
 	u8 tx_buf_desc_sz;
 	u8 rx_pkt_desc_sz;
@@ -1083,6 +1101,8 @@ struct rtw_chip_info {
 	const struct rtw_hw_reg *dig;
 	u32 rf_base_addr[2];
 	u32 rf_sipi_addr[2];
+	const struct rtw_rf_sipi_addr *rf_sipi_read_addr;
+	u8 fix_rf_phy_num;
 
 	const struct rtw_table *mac_tbl;
 	const struct rtw_table *agc_tbl;
@@ -1455,6 +1475,7 @@ struct rtw_efuse {
 	u8 ant_div_cfg;
 	u8 ant_div_type;
 	u8 regd;
+	u8 afe;
 
 	u8 lna_type_2g;
 	u8 lna_type_5g;
@@ -1567,8 +1588,9 @@ struct rtw_hal {
 	u8 sec_ch_offset;
 	u8 rf_type;
 	u8 rf_path_num;
-	u8 antenna_tx;
-	u8 antenna_rx;
+	u8 rf_phy_num;
+	u32 antenna_tx;
+	u32 antenna_rx;
 	u8 bfee_sts_cap;
 
 	/* protect tx power section */
@@ -1698,6 +1720,28 @@ static inline bool rtw_ssid_equal(struct cfg80211_ssid *a,
 	return true;
 }
 
+static inline void rtw_chip_efuse_grant_on(struct rtw_dev *rtwdev)
+{
+	if (rtwdev->chip->ops->efuse_grant)
+		rtwdev->chip->ops->efuse_grant(rtwdev, true);
+}
+
+static inline void rtw_chip_efuse_grant_off(struct rtw_dev *rtwdev)
+{
+	if (rtwdev->chip->ops->efuse_grant)
+		rtwdev->chip->ops->efuse_grant(rtwdev, false);
+}
+
+static inline bool rtw_chip_wcpu_11n(struct rtw_dev *rtwdev)
+{
+	return rtwdev->chip->wlan_cpu == RTW_WCPU_11N;
+}
+
+static inline bool rtw_chip_wcpu_11ac(struct rtw_dev *rtwdev)
+{
+	return rtwdev->chip->wlan_cpu == RTW_WCPU_11AC;
+}
+
 void rtw_get_channel_params(struct cfg80211_chan_def *chandef,
 			    struct rtw_channel_params *ch_param);
 bool check_hw_ready(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 target);
diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index 1af87eb2e53a..695c2c0d64b0 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -411,12 +411,14 @@ static void rtw_pci_reset_buf_desc(struct rtw_dev *rtwdev)
 	dma = rtwpci->tx_rings[RTW_TX_QUEUE_BCN].r.dma;
 	rtw_write32(rtwdev, RTK_PCI_TXBD_DESA_BCNQ, dma);
 
-	len = rtwpci->tx_rings[RTW_TX_QUEUE_H2C].r.len;
-	dma = rtwpci->tx_rings[RTW_TX_QUEUE_H2C].r.dma;
-	rtwpci->tx_rings[RTW_TX_QUEUE_H2C].r.rp = 0;
-	rtwpci->tx_rings[RTW_TX_QUEUE_H2C].r.wp = 0;
-	rtw_write16(rtwdev, RTK_PCI_TXBD_NUM_H2CQ, len & TRX_BD_IDX_MASK);
-	rtw_write32(rtwdev, RTK_PCI_TXBD_DESA_H2CQ, dma);
+	if (!rtw_chip_wcpu_11n(rtwdev)) {
+		len = rtwpci->tx_rings[RTW_TX_QUEUE_H2C].r.len;
+		dma = rtwpci->tx_rings[RTW_TX_QUEUE_H2C].r.dma;
+		rtwpci->tx_rings[RTW_TX_QUEUE_H2C].r.rp = 0;
+		rtwpci->tx_rings[RTW_TX_QUEUE_H2C].r.wp = 0;
+		rtw_write16(rtwdev, RTK_PCI_TXBD_NUM_H2CQ, len & TRX_BD_IDX_MASK);
+		rtw_write32(rtwdev, RTK_PCI_TXBD_DESA_H2CQ, dma);
+	}
 
 	len = rtwpci->tx_rings[RTW_TX_QUEUE_BK].r.len;
 	dma = rtwpci->tx_rings[RTW_TX_QUEUE_BK].r.dma;
@@ -471,8 +473,9 @@ static void rtw_pci_reset_buf_desc(struct rtw_dev *rtwdev)
 	rtw_write32(rtwdev, RTK_PCI_TXBD_RWPTR_CLR, 0xffffffff);
 
 	/* reset H2C Queue index in a single write */
-	rtw_write32_set(rtwdev, RTK_PCI_TXBD_H2CQ_CSR,
-			BIT_CLR_H2CQ_HOST_IDX | BIT_CLR_H2CQ_HW_IDX);
+	if (rtw_chip_wcpu_11ac(rtwdev))
+		rtw_write32_set(rtwdev, RTK_PCI_TXBD_H2CQ_CSR,
+				BIT_CLR_H2CQ_HOST_IDX | BIT_CLR_H2CQ_HW_IDX);
 }
 
 static void rtw_pci_reset_trx_ring(struct rtw_dev *rtwdev)
@@ -489,7 +492,9 @@ static void rtw_pci_enable_interrupt(struct rtw_dev *rtwdev,
 
 	rtw_write32(rtwdev, RTK_PCI_HIMR0, rtwpci->irq_mask[0]);
 	rtw_write32(rtwdev, RTK_PCI_HIMR1, rtwpci->irq_mask[1]);
-	rtw_write32(rtwdev, RTK_PCI_HIMR3, rtwpci->irq_mask[3]);
+	if (rtw_chip_wcpu_11ac(rtwdev))
+		rtw_write32(rtwdev, RTK_PCI_HIMR3, rtwpci->irq_mask[3]);
+
 	rtwpci->irq_enabled = true;
 
 	spin_unlock_irqrestore(&rtwpci->hwirq_lock, flags);
@@ -507,7 +512,9 @@ static void rtw_pci_disable_interrupt(struct rtw_dev *rtwdev,
 
 	rtw_write32(rtwdev, RTK_PCI_HIMR0, 0);
 	rtw_write32(rtwdev, RTK_PCI_HIMR1, 0);
-	rtw_write32(rtwdev, RTK_PCI_HIMR3, 0);
+	if (rtw_chip_wcpu_11ac(rtwdev))
+		rtw_write32(rtwdev, RTK_PCI_HIMR3, 0);
+
 	rtwpci->irq_enabled = false;
 
 out:
@@ -1012,13 +1019,17 @@ static void rtw_pci_irq_recognized(struct rtw_dev *rtwdev,
 
 	irq_status[0] = rtw_read32(rtwdev, RTK_PCI_HISR0);
 	irq_status[1] = rtw_read32(rtwdev, RTK_PCI_HISR1);
-	irq_status[3] = rtw_read32(rtwdev, RTK_PCI_HISR3);
+	if (rtw_chip_wcpu_11ac(rtwdev))
+		irq_status[3] = rtw_read32(rtwdev, RTK_PCI_HISR3);
+	else
+		irq_status[3] = 0;
 	irq_status[0] &= rtwpci->irq_mask[0];
 	irq_status[1] &= rtwpci->irq_mask[1];
 	irq_status[3] &= rtwpci->irq_mask[3];
 	rtw_write32(rtwdev, RTK_PCI_HISR0, irq_status[0]);
 	rtw_write32(rtwdev, RTK_PCI_HISR1, irq_status[1]);
-	rtw_write32(rtwdev, RTK_PCI_HISR3, irq_status[3]);
+	if (rtw_chip_wcpu_11ac(rtwdev))
+		rtw_write32(rtwdev, RTK_PCI_HISR3, irq_status[3]);
 
 	spin_unlock_irqrestore(&rtwpci->hwirq_lock, flags);
 }
@@ -1567,6 +1578,9 @@ static const struct pci_device_id rtw_pci_id_table[] = {
 #endif
 #ifdef CONFIG_RTW88_8822CE
 	{ RTK_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xC822, rtw8822c_hw_spec) },
+#endif
+#ifdef CONFIG_RTW88_8723DE
+	{ RTK_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xD723, rtw8723d_hw_spec) },
 #endif
 	{},
 };
diff --git a/drivers/net/wireless/realtek/rtw88/phy.c b/drivers/net/wireless/realtek/rtw88/phy.c
index 8793dd22188f..8489abfdc12e 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.c
+++ b/drivers/net/wireless/realtek/rtw88/phy.c
@@ -679,7 +679,7 @@ u32 rtw_phy_read_rf(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
 	const u32 *base_addr = chip->rf_base_addr;
 	u32 val, direct_addr;
 
-	if (rf_path >= hal->rf_path_num) {
+	if (rf_path >= hal->rf_phy_num) {
 		rtw_err(rtwdev, "unsupported rf path (%d)\n", rf_path);
 		return INV_RF_DATA;
 	}
@@ -693,6 +693,54 @@ u32 rtw_phy_read_rf(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
 	return val;
 }
 
+u32 rtw_phy_read_rf_sipi(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
+			 u32 addr, u32 mask)
+{
+	struct rtw_hal *hal = &rtwdev->hal;
+	struct rtw_chip_info *chip = rtwdev->chip;
+	const struct rtw_rf_sipi_addr *rf_sipi_addr;
+	const struct rtw_rf_sipi_addr *rf_sipi_addr_a;
+	u32 val32;
+	u32 en_pi;
+	u32 r_addr;
+	u32 shift;
+
+	if (rf_path >= hal->rf_phy_num) {
+		rtw_err(rtwdev, "unsupported rf path (%d)\n", rf_path);
+		return INV_RF_DATA;
+	}
+
+	if (!chip->rf_sipi_read_addr) {
+		rtw_err(rtwdev, "rf_sipi_read_addr isn't defined\n");
+		return INV_RF_DATA;
+	}
+
+	rf_sipi_addr = &chip->rf_sipi_read_addr[rf_path];
+	rf_sipi_addr_a = &chip->rf_sipi_read_addr[RF_PATH_A];
+
+	addr &= 0xff;
+
+	val32 = rtw_read32(rtwdev, rf_sipi_addr->hssi_2);
+	val32 = (val32 & ~LSSI_READ_ADDR_MASK) | (addr << 23);
+	rtw_write32(rtwdev, rf_sipi_addr->hssi_2, val32);
+
+	/* toggle read edge of path A */
+	val32 = rtw_read32(rtwdev, rf_sipi_addr_a->hssi_2);
+	rtw_write32(rtwdev, rf_sipi_addr_a->hssi_2, val32 & ~LSSI_READ_EDGE_MASK);
+	rtw_write32(rtwdev, rf_sipi_addr_a->hssi_2, val32 | LSSI_READ_EDGE_MASK);
+
+	udelay(120);
+
+	en_pi = rtw_read32_mask(rtwdev, rf_sipi_addr->hssi_1, BIT(8));
+	r_addr = en_pi ? rf_sipi_addr->lssi_read_pi : rf_sipi_addr->lssi_read;
+
+	val32 = rtw_read32_mask(rtwdev, r_addr, LSSI_READ_DATA_MASK);
+
+	shift = __ffs(mask);
+
+	return (val32 & mask) >> shift;
+}
+
 bool rtw_phy_write_rf_reg_sipi(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
 			       u32 addr, u32 mask, u32 data)
 {
@@ -703,7 +751,7 @@ bool rtw_phy_write_rf_reg_sipi(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
 	u32 old_data = 0;
 	u32 shift;
 
-	if (rf_path >= hal->rf_path_num) {
+	if (rf_path >= hal->rf_phy_num) {
 		rtw_err(rtwdev, "unsupported rf path (%d)\n", rf_path);
 		return false;
 	}
@@ -712,7 +760,7 @@ bool rtw_phy_write_rf_reg_sipi(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
 	mask &= RFREG_MASK;
 
 	if (mask != RFREG_MASK) {
-		old_data = rtw_phy_read_rf(rtwdev, rf_path, addr, RFREG_MASK);
+		old_data = chip->ops->read_rf(rtwdev, rf_path, addr, RFREG_MASK);
 
 		if (old_data == INV_RF_DATA) {
 			rtw_err(rtwdev, "Write fail, rf is disabled\n");
@@ -740,7 +788,7 @@ bool rtw_phy_write_rf_reg(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
 	const u32 *base_addr = chip->rf_base_addr;
 	u32 direct_addr;
 
-	if (rf_path >= hal->rf_path_num) {
+	if (rf_path >= hal->rf_phy_num) {
 		rtw_err(rtwdev, "unsupported rf path (%d)\n", rf_path);
 		return false;
 	}
diff --git a/drivers/net/wireless/realtek/rtw88/phy.h b/drivers/net/wireless/realtek/rtw88/phy.h
index af916d8784cd..413bf7165cc0 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.h
+++ b/drivers/net/wireless/realtek/rtw88/phy.h
@@ -21,6 +21,8 @@ void rtw_phy_dynamic_mechanism(struct rtw_dev *rtwdev);
 u8 rtw_phy_rf_power_2_rssi(s8 *rf_power, u8 path_num);
 u32 rtw_phy_read_rf(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
 		    u32 addr, u32 mask);
+u32 rtw_phy_read_rf_sipi(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
+			 u32 addr, u32 mask);
 bool rtw_phy_write_rf_reg_sipi(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
 			       u32 addr, u32 mask, u32 data);
 bool rtw_phy_write_rf_reg(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
@@ -178,4 +180,8 @@ enum rtw_phy_cck_pd_lv {
 
 #define CCK_FA_AVG_RESET 0xffffffff
 
+#define LSSI_READ_ADDR_MASK	0x7f800000
+#define LSSI_READ_EDGE_MASK	0x80000000
+#define LSSI_READ_DATA_MASK	0xfffff
+
 #endif
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index 9d94534c9674..9fdfcdc5c5cf 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -6,15 +6,23 @@
 #define __RTW_REG_DEF_H__
 
 #define REG_SYS_FUNC_EN		0x0002
+#define BIT_FEN_EN_25_1		BIT(13)
+#define BIT_FEN_ELDR		BIT(12)
 #define BIT_FEN_CPUEN		BIT(2)
 #define BIT_FEN_BB_GLB_RST	BIT(1)
 #define BIT_FEN_BB_RSTB		BIT(0)
 #define BIT_R_DIS_PRST		BIT(6)
 #define BIT_WLOCK_1C_B6		BIT(5)
 #define REG_SYS_PW_CTRL		0x0004
+#define BIT_PFM_WOWL		BIT(3)
 #define REG_SYS_CLK_CTRL	0x0008
 #define BIT_CPU_CLK_EN		BIT(14)
 
+#define REG_SYS_CLKR		0x0008
+#define BIT_ANA8M		BIT(1)
+#define BIT_WAKEPAD_EN		BIT(3)
+#define BIT_LOADER_CLK_EN	BIT(5)
+
 #define REG_RSV_CTRL		0x001C
 #define DISABLE_PI		0x3
 #define ENABLE_PI		0x2
@@ -33,12 +41,23 @@
 #define BIT_MASK_EF_ADDR	0x3ff
 #define BIT_MASK_EF_DATA	0xff
 #define BITS_EF_ADDR		(BIT_MASK_EF_ADDR << BIT_SHIFT_EF_ADDR)
+#define BITS_PLL		0xf0
+
+#define REG_AFE_CTRL3		0x2c
+#define BIT_MASK_XTAL		0x00FFF000
+#define BIT_XTAL_GMP_BIT4	BIT(28)
 
 #define REG_LDO_EFUSE_CTRL	0x0034
 #define BIT_MASK_EFUSE_BANK_SEL	(BIT(8) | BIT(9))
 
+#define BIT_LDO25_VOLTAGE_V25	0x03
+#define BIT_MASK_LDO25_VOLTAGE	GENMASK(6, 4)
+#define BIT_SHIFT_LDO25_VOLTAGE	4
+#define BIT_LDO25_EN		BIT(7)
+
 #define REG_GPIO_MUXCFG		0x0040
 #define BIT_FSPI_EN		BIT(19)
+#define BIT_EN_SIC		BIT(12)
 #define BIT_BT_AOD_GPIO3	BIT(9)
 #define BIT_BT_PTA_EN		BIT(5)
 #define BIT_WLRFE_4_5_EN	BIT(2)
@@ -48,6 +67,7 @@
 #define BIT_PAPE_SEL_EN		BIT(25)
 #define BIT_DPDT_WL_SEL		BIT(24)
 #define BIT_DPDT_SEL_EN		BIT(23)
+#define REG_LEDCFG2		0x004E
 #define REG_PAD_CTRL1		0x0064
 #define BIT_PAPE_WLBT_SEL	BIT(29)
 #define BIT_LNAON_WLBT_SEL	BIT(28)
@@ -63,30 +83,54 @@
 #define BIT_LTE_MUX_CTRL_PATH	BIT(26)
 #define REG_HCI_OPT_CTRL	0x0074
 
+#define REG_AFE_CTRL_4		0x0078
+#define BIT_CK320M_AFE_EN	BIT(4)
+#define BIT_EN_SYN		BIT(15)
+
+#define REG_LDO_SWR_CTRL	0x007C
+#define LDO_SEL			0xC3
+#define SPS_SEL			0x83
+#define BIT_XTA1		BIT(29)
+#define BIT_XTA0		BIT(28)
+
 #define REG_MCUFW_CTRL		0x0080
 #define BIT_ANA_PORT_EN		BIT(22)
 #define BIT_MAC_PORT_EN		BIT(21)
 #define BIT_BOOT_FSPI_EN	BIT(20)
+#define BIT_ROM_DLEN		BIT(19)
+#define BIT_ROM_PGE		GENMASK(18, 16)	/* legacy only */
+#define BIT_SHIFT_ROM_PGE	16
 #define BIT_FW_INIT_RDY		BIT(15)
 #define BIT_FW_DW_RDY		BIT(14)
 #define BIT_RPWM_TOGGLE		BIT(7)
+#define BIT_RAM_DL_SEL		BIT(7)	/* legacy only */
 #define BIT_DMEM_CHKSUM_OK	BIT(6)
+#define BIT_WINTINI_RDY		BIT(6)	/* legacy only */
 #define BIT_DMEM_DW_OK		BIT(5)
 #define BIT_IMEM_CHKSUM_OK	BIT(4)
 #define BIT_IMEM_DW_OK		BIT(3)
 #define BIT_IMEM_BOOT_LOAD_CHECKSUM_OK BIT(2)
+#define BIT_FWDL_CHK_RPT	BIT(2)	/* legacy only */
+#define BIT_MCUFWDL_RDY		BIT(1)	/* legacy only */
 #define BIT_MCUFWDL_EN		BIT(0)
 #define BIT_CHECK_SUM_OK	(BIT(4) | BIT(6))
 #define FW_READY		(BIT_FW_INIT_RDY | BIT_FW_DW_RDY |             \
 				 BIT_IMEM_DW_OK | BIT_DMEM_DW_OK |             \
 				 BIT_CHECK_SUM_OK)
+#define FW_READY_LEGACY		(BIT_MCUFWDL_RDY | BIT_FWDL_CHK_RPT |	       \
+				 BIT_WINTINI_RDY | BIT_RAM_DL_SEL)
 #define FW_READY_MASK		0xffff
 
+#define REG_EFUSE_ACCESS	0x00CF
+#define EFUSE_ACCESS_ON		0x69
+#define EFUSE_ACCESS_OFF	0x00
+
 #define REG_WLRF1		0x00EC
 #define REG_WIFI_BT_INFO	0x00AA
 #define BIT_BT_INT_EN		BIT(15)
 #define REG_SYS_CFG1		0x00F0
 #define	BIT_RTL_ID		BIT(23)
+#define BIT_LDO			BIT(24)
 #define BIT_RF_TYPE_ID		BIT(27)
 #define BIT_SHIFT_VENDOR_ID	16
 #define BIT_MASK_VENDOR_ID	0xf
@@ -166,6 +210,7 @@
 #define BIT_FS_RXDONE		BIT(16)
 #define REG_PKTBUF_DBG_CTRL	0x0140
 #define REG_C2HEVT		0x01A0
+#define REG_MCUTST_1		0x01C0
 #define REG_MCUTST_II		0x01C4
 #define REG_WOWLAN_WAKE_REASON	0x01C7
 #define REG_HMETFR		0x01CC
@@ -178,14 +223,42 @@
 #define REG_HMEBOX2_EX		0x01F8
 #define REG_HMEBOX3_EX		0x01FC
 
+#define REG_RQPN		0x0200
+#define BIT_MASK_HPQ		0xff
+#define BIT_SHIFT_HPQ		0
+#define BIT_RQPN_HPQ(x)		(((x) & BIT_MASK_HPQ) << BIT_SHIFT_HPQ)
+#define BIT_MASK_LPQ		0xff
+#define BIT_SHIFT_LPQ		8
+#define BIT_RQPN_LPQ(x)		(((x) & BIT_MASK_LPQ) << BIT_SHIFT_LPQ)
+#define BIT_MASK_PUBQ		0xff
+#define BIT_SHIFT_PUBQ		16
+#define BIT_RQPN_PUBQ(x)	(((x) & BIT_MASK_PUBQ) << BIT_SHIFT_PUBQ)
+#define BIT_RQPN_HLP(h, l, p)	(BIT_LD_RQPN | BIT_RQPN_HPQ(h) |	       \
+				 BIT_RQPN_LPQ(l) | BIT_RQPN_PUBQ(p))
+
 #define REG_FIFOPAGE_CTRL_2	0x0204
 #define BIT_BCN_VALID_V1	BIT(15)
 #define BIT_MASK_BCN_HEAD_1_V1	0xfff
 #define REG_AUTO_LLT_V1		0x0208
 #define BIT_AUTO_INIT_LLT_V1	BIT(0)
+#define REG_DWBCN0_CTRL		0x0208
+#define BIT_BCN_VALID		BIT(16)
 #define REG_TXDMA_OFFSET_CHK	0x020C
+#define BIT_DROP_DATA_EN	BIT(9)
 #define REG_TXDMA_STATUS	0x0210
 #define BTI_PAGE_OVF		BIT(2)
+
+#define REG_RQPN_NPQ		0x0214
+#define BIT_MASK_NPQ		0xff
+#define BIT_SHIFT_NPQ		0
+#define BIT_MASK_EPQ		0xff
+#define BIT_SHIFT_EPQ		16
+#define BIT_RQPN_NPQ(x)		(((x) & BIT_MASK_NPQ) << BIT_SHIFT_NPQ)
+#define BIT_RQPN_EPQ(x)		(((x) & BIT_MASK_EPQ) << BIT_SHIFT_EPQ)
+#define BIT_RQPN_NE(n, e)	(BIT_RQPN_NPQ(n) | BIT_RQPN_EPQ(e))
+
+#define REG_AUTO_LLT		0x0224
+#define BIT_AUTO_INIT_LLT	BIT(16)
 #define REG_RQPN_CTRL_1		0x0228
 #define REG_RQPN_CTRL_2		0x022C
 #define BIT_LD_RQPN		BIT(31)
@@ -213,7 +286,11 @@
 #define REG_FWHW_TXQ_CTRL	0x0420
 #define BIT_EN_BCNQ_DL		BIT(22)
 #define BIT_EN_WR_FREE_TAIL	BIT(20)
+#define REG_HWSEQ_CTRL		0x0423
+
 #define REG_BCNQ_BDNY_V1	0x0424
+#define REG_BCNQ_BDNY		0x0424
+#define REG_MGQ_BDNY		0x0425
 #define REG_LIFETIME_EN		0x0426
 #define BIT_BA_PARSER_EN	BIT(5)
 #define REG_SPEC_SIFS		0x0428
@@ -229,6 +306,8 @@
 #define BIT_CHECK_CCK_EN	BIT(7)
 #define REG_AMPDU_MAX_TIME_V1	0x0455
 #define REG_BCNQ1_BDNY_V1	0x0456
+#define REG_AMPDU_MAX_TIME	0x0456
+#define REG_WMAC_LBK_BF_HD	0x045D
 #define REG_TX_HANG_CTRL	0x045E
 #define BIT_EN_GNT_BT_AWAKE	BIT(3)
 #define BIT_EN_EOF_V1		BIT(2)
@@ -243,7 +322,10 @@
 #define REG_QUEUE_CTRL		0x04C6
 #define BIT_PTA_WL_TX_EN	BIT(4)
 #define BIT_PTA_EDCCA_EN	BIT(5)
+#define REG_SINGLE_AMPDU_CTRL	0x04C7
+#define BIT_EN_SINGLE_APMDU	BIT(7)
 #define REG_PROT_MODE_CTRL	0x04C8
+#define REG_MAX_AGGR_NUM	0x04CA
 #define REG_BAR_MODE_CTRL	0x04CC
 #define REG_PRECNT_CTRL		0x04E5
 #define BIT_BTCCA_CTRL		(BIT(0) | BIT(1))
@@ -263,6 +345,7 @@
 #define BIT_SHIFT_SIFS_OFDM_CTX	8
 #define BIT_SHIFT_SIFS_CCK_TRX	16
 #define BIT_SHIFT_SIFS_OFDM_TRX	24
+#define REG_AGGR_BREAK_TIME	0x051A
 #define REG_SLOT		0x051B
 #define REG_TX_PTCL_CTRL	0x0520
 #define BIT_SIFS_BK_EN		BIT(12)
@@ -274,18 +357,23 @@
 #define REG_TBTT_PROHIBIT	0x0540
 #define BIT_SHIFT_TBTT_HOLD_TIME_AP 8
 #define REG_RD_NAV_NXT		0x0544
+#define REG_NAV_PROT_LEN	0x0546
 #define REG_BCN_CTRL		0x0550
 #define BIT_DIS_TSF_UDT		BIT(4)
 #define BIT_EN_BCN_FUNCTION	BIT(3)
+#define BIT_EN_TXBCN_RPT	BIT(2)
 #define REG_BCN_CTRL_CLINT0	0x0551
 #define REG_DRVERLYINT		0x0558
 #define REG_BCNDMATIM		0x0559
+#define REG_ATIMWND		0x055A
 #define REG_USTIME_TSF		0x055C
 #define REG_BCN_MAX_ERR		0x055D
 #define REG_RXTSF_OFFSET_CCK	0x055E
 #define REG_MISC_CTRL		0x0577
 #define BIT_EN_FREE_CNT		BIT(3)
 #define BIT_DIS_SECOND_CCA	(BIT(0) | BIT(1))
+#define REG_HIQ_NO_LMT_EN	0x5A7
+#define BIT_HIQ_NO_LMT_EN_ROOT	BIT(0)
 #define REG_TIMER0_SRC_SEL	0x05B4
 #define BIT_TSFT_SEL_TIMER0	(BIT(4) | BIT(5) | BIT(6))
 
@@ -311,6 +399,7 @@
 #define BIT_HTC_LOC_CTRL	BIT(14)
 #define BIT_RPFM_CAM_ENABLE	BIT(12)
 #define BIT_TA_BCN		BIT(11)
+#define BIT_RCR_ADF		BIT(11)
 #define BIT_DISDECMYPKT		BIT(10)
 #define BIT_AICV		BIT(9)
 #define BIT_ACRC32		BIT(8)
@@ -328,6 +417,7 @@
 #define REG_MAR			0x0620
 #define REG_USTIME_EDCA		0x0638
 #define REG_ACKTO_CCK		0x0639
+#define REG_MAC_SPEC_SIFS	0x063A
 #define REG_RESP_SIFS_CCK	0x063C
 #define REG_RESP_SIFS_OFDM	0x063E
 #define REG_ACKTO		0x0640
@@ -370,12 +460,19 @@
 #define BIT_LTE_COEX_EN		BIT(7)
 #define REG_BT_STAT_CTRL	0x0778
 #define REG_BT_TDMA_TIME	0x0790
+#define REG_LTR_IDLE_LATENCY	0x0798
+#define REG_LTR_ACTIVE_LATENCY	0x079C
+#define REG_LTR_CTRL_BASIC	0x07A4
 #define REG_WMAC_OPTION_FUNCTION 0x07D0
 #define REG_WMAC_OPTION_FUNCTION_1 0x07D4
 
+#define REG_FPGA0_RFMOD		0x0800
+#define BIT_CCKEN		BIT(24)
+#define BIT_OFDMEN		BIT(25)
 #define REG_RX_GAIN_EN		0x081c
 
 #define REG_RFE_CTRL_E		0x0974
+#define REG_2ND_CCA_CTRL	0x0976
 
 #define REG_DIS_DPD		0x0a70
 #define DIS_DPD_MASK		GENMASK(9, 0)
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723d.c b/drivers/net/wireless/realtek/rtw88/rtw8723d.c
new file mode 100644
index 000000000000..8ca4d5794434
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/rtw8723d.c
@@ -0,0 +1,761 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright(c) 2018-2019  Realtek Corporation
+ */
+
+#include "main.h"
+#include "coex.h"
+#include "fw.h"
+#include "tx.h"
+#include "rx.h"
+#include "phy.h"
+#include "rtw8723d.h"
+#include "rtw8723d_table.h"
+#include "mac.h"
+#include "reg.h"
+#include "debug.h"
+
+static const struct rtw_hw_reg rtw8723d_txagc[] = {
+	[DESC_RATE1M]	= { .addr = 0xe08, .mask = 0x0000ff00 },
+	[DESC_RATE2M]	= { .addr = 0x86c, .mask = 0x0000ff00 },
+	[DESC_RATE5_5M]	= { .addr = 0x86c, .mask = 0x00ff0000 },
+	[DESC_RATE11M]	= { .addr = 0x86c, .mask = 0xff000000 },
+	[DESC_RATE6M]	= { .addr = 0xe00, .mask = 0x000000ff },
+	[DESC_RATE9M]	= { .addr = 0xe00, .mask = 0x0000ff00 },
+	[DESC_RATE12M]	= { .addr = 0xe00, .mask = 0x00ff0000 },
+	[DESC_RATE18M]	= { .addr = 0xe00, .mask = 0xff000000 },
+	[DESC_RATE24M]	= { .addr = 0xe04, .mask = 0x000000ff },
+	[DESC_RATE36M]	= { .addr = 0xe04, .mask = 0x0000ff00 },
+	[DESC_RATE48M]	= { .addr = 0xe04, .mask = 0x00ff0000 },
+	[DESC_RATE54M]	= { .addr = 0xe04, .mask = 0xff000000 },
+	[DESC_RATEMCS0]	= { .addr = 0xe10, .mask = 0x000000ff },
+	[DESC_RATEMCS1]	= { .addr = 0xe10, .mask = 0x0000ff00 },
+	[DESC_RATEMCS2]	= { .addr = 0xe10, .mask = 0x00ff0000 },
+	[DESC_RATEMCS3]	= { .addr = 0xe10, .mask = 0xff000000 },
+	[DESC_RATEMCS4]	= { .addr = 0xe14, .mask = 0x000000ff },
+	[DESC_RATEMCS5]	= { .addr = 0xe14, .mask = 0x0000ff00 },
+	[DESC_RATEMCS6]	= { .addr = 0xe14, .mask = 0x00ff0000 },
+	[DESC_RATEMCS7]	= { .addr = 0xe14, .mask = 0xff000000 },
+};
+
+#define WLAN_TXQ_RPT_EN		0x1F
+#define WLAN_SLOT_TIME		0x09
+#define WLAN_RL_VAL		0x3030
+#define WLAN_BAR_VAL		0x0201ffff
+#define BIT_MASK_TBTT_HOLD	0x00000fff
+#define BIT_SHIFT_TBTT_HOLD	8
+#define BIT_MASK_TBTT_SETUP	0x000000ff
+#define BIT_SHIFT_TBTT_SETUP	0
+#define BIT_MASK_TBTT_MASK	((BIT_MASK_TBTT_HOLD << BIT_SHIFT_TBTT_HOLD) | \
+				 (BIT_MASK_TBTT_SETUP << BIT_SHIFT_TBTT_SETUP))
+#define TBTT_TIME(s, h)((((s) & BIT_MASK_TBTT_SETUP) << BIT_SHIFT_TBTT_SETUP) |\
+			(((h) & BIT_MASK_TBTT_HOLD) << BIT_SHIFT_TBTT_HOLD))
+#define WLAN_TBTT_TIME_NORMAL	TBTT_TIME(0x04, 0x80)
+#define WLAN_TBTT_TIME_STOP_BCN	TBTT_TIME(0x04, 0x64)
+#define WLAN_PIFS_VAL		0
+#define WLAN_AGG_BRK_TIME	0x16
+#define WLAN_NAV_PROT_LEN	0x0040
+#define WLAN_SPEC_SIFS		0x100a
+#define WLAN_RX_PKT_LIMIT	0x17
+#define WLAN_MAX_AGG_NR		0x0A
+#define WLAN_AMPDU_MAX_TIME	0x1C
+#define WLAN_ANT_SEL		0x82
+#define WLAN_LTR_IDLE_LAT	0x883C883C
+#define WLAN_LTR_ACT_LAT	0x880B880B
+#define WLAN_LTR_CTRL1		0xCB004010
+#define WLAN_LTR_CTRL2		0x01233425
+
+static void rtw8723d_phy_set_param(struct rtw_dev *rtwdev)
+{
+	u8 xtal_cap;
+	u32 val32;
+
+	/* power on BB/RF domain */
+	rtw_write16_set(rtwdev, REG_SYS_FUNC_EN,
+			BIT_FEN_EN_25_1 | BIT_FEN_BB_GLB_RST | BIT_FEN_BB_RSTB);
+	rtw_write8_set(rtwdev, REG_RF_CTRL,
+		       BIT_RF_EN | BIT_RF_RSTB | BIT_RF_SDM_RSTB);
+	rtw_write8(rtwdev, REG_AFE_CTRL1 + 1, 0x80);
+
+	rtw_phy_load_tables(rtwdev);
+
+	/* post init after header files config */
+	rtw_write32_clr(rtwdev, REG_RCR, BIT_RCR_ADF);
+	rtw_write8_set(rtwdev, REG_HIQ_NO_LMT_EN, BIT_HIQ_NO_LMT_EN_ROOT);
+	rtw_write16_set(rtwdev, REG_AFE_CTRL_4, BIT_CK320M_AFE_EN | BIT_EN_SYN);
+
+	xtal_cap = rtwdev->efuse.crystal_cap & 0x3F;
+	rtw_write32_mask(rtwdev, REG_AFE_CTRL3, BIT_MASK_XTAL,
+			 xtal_cap | (xtal_cap << 6));
+	rtw_write32_set(rtwdev, REG_FPGA0_RFMOD, BIT_CCKEN | BIT_OFDMEN);
+	if ((rtwdev->efuse.afe >> 4) == 14) {
+		rtw_write32_set(rtwdev, REG_AFE_CTRL3, BIT_XTAL_GMP_BIT4);
+		rtw_write32_clr(rtwdev, REG_AFE_CTRL1, BITS_PLL);
+		rtw_write32_set(rtwdev, REG_LDO_SWR_CTRL, BIT_XTA1);
+		rtw_write32_clr(rtwdev, REG_LDO_SWR_CTRL, BIT_XTA0);
+	}
+
+	rtw_write8(rtwdev, REG_SLOT, WLAN_SLOT_TIME);
+	rtw_write8(rtwdev, REG_FWHW_TXQ_CTRL + 1, WLAN_TXQ_RPT_EN);
+	rtw_write16(rtwdev, REG_RETRY_LIMIT, WLAN_RL_VAL);
+	rtw_write32(rtwdev, REG_BAR_MODE_CTRL, WLAN_BAR_VAL);
+	rtw_write8(rtwdev, REG_ATIMWND, 0x2);
+	rtw_write8(rtwdev, REG_BCN_CTRL,
+		   BIT_DIS_TSF_UDT | BIT_EN_BCN_FUNCTION | BIT_EN_TXBCN_RPT);
+	val32 = rtw_read32(rtwdev, REG_TBTT_PROHIBIT);
+	val32 &= ~BIT_MASK_TBTT_MASK;
+	val32 |= WLAN_TBTT_TIME_STOP_BCN;
+	rtw_write8(rtwdev, REG_TBTT_PROHIBIT, val32);
+	rtw_write8(rtwdev, REG_PIFS, WLAN_PIFS_VAL);
+	rtw_write8(rtwdev, REG_AGGR_BREAK_TIME, WLAN_AGG_BRK_TIME);
+	rtw_write16(rtwdev, REG_NAV_PROT_LEN, WLAN_NAV_PROT_LEN);
+	rtw_write16(rtwdev, REG_MAC_SPEC_SIFS, WLAN_SPEC_SIFS);
+	rtw_write16(rtwdev, REG_SIFS, WLAN_SPEC_SIFS);
+	rtw_write16(rtwdev, REG_SIFS + 2, WLAN_SPEC_SIFS);
+	rtw_write8(rtwdev, REG_SINGLE_AMPDU_CTRL, BIT_EN_SINGLE_APMDU);
+	rtw_write8(rtwdev, REG_RX_PKT_LIMIT, WLAN_RX_PKT_LIMIT);
+	rtw_write8(rtwdev, REG_MAX_AGGR_NUM, WLAN_MAX_AGG_NR);
+	rtw_write8(rtwdev, REG_AMPDU_MAX_TIME, WLAN_AMPDU_MAX_TIME);
+	rtw_write8(rtwdev, REG_LEDCFG2, WLAN_ANT_SEL);
+
+	rtw_write32(rtwdev, REG_LTR_IDLE_LATENCY, WLAN_LTR_IDLE_LAT);
+	rtw_write32(rtwdev, REG_LTR_ACTIVE_LATENCY, WLAN_LTR_ACT_LAT);
+	rtw_write32(rtwdev, REG_LTR_CTRL_BASIC, WLAN_LTR_CTRL1);
+	rtw_write32(rtwdev, REG_LTR_CTRL_BASIC + 4, WLAN_LTR_CTRL2);
+
+	rtw_phy_init(rtwdev);
+
+	rtw_write16_set(rtwdev, REG_TXDMA_OFFSET_CHK, BIT_DROP_DATA_EN);
+	rtw_write32_mask(rtwdev, REG_OFDM0_XAAGC1, MASKBYTE0, 0x50);
+	rtw_write32_mask(rtwdev, REG_OFDM0_XAAGC1, MASKBYTE0, 0x20);
+}
+
+static void rtw8723de_efuse_parsing(struct rtw_efuse *efuse,
+				    struct rtw8723d_efuse *map)
+{
+	ether_addr_copy(efuse->addr, map->e.mac_addr);
+}
+
+static int rtw8723d_read_efuse(struct rtw_dev *rtwdev, u8 *log_map)
+{
+	struct rtw_efuse *efuse = &rtwdev->efuse;
+	struct rtw8723d_efuse *map;
+	int i;
+
+	map = (struct rtw8723d_efuse *)log_map;
+
+	efuse->rfe_option = 0;
+	efuse->rf_board_option = map->rf_board_option;
+	efuse->crystal_cap = map->xtal_k;
+	efuse->pa_type_2g = map->pa_type;
+	efuse->lna_type_2g = map->lna_type_2g[0];
+	efuse->channel_plan = map->channel_plan;
+	efuse->country_code[0] = map->country_code[0];
+	efuse->country_code[1] = map->country_code[1];
+	efuse->bt_setting = map->rf_bt_setting;
+	efuse->regd = map->rf_board_option & 0x7;
+	efuse->thermal_meter[0] = map->thermal_meter;
+	efuse->thermal_meter_k = map->thermal_meter;
+	efuse->afe = map->afe;
+
+	for (i = 0; i < 4; i++)
+		efuse->txpwr_idx_table[i] = map->txpwr_idx_table[i];
+
+	switch (rtw_hci_type(rtwdev)) {
+	case RTW_HCI_TYPE_PCIE:
+		rtw8723de_efuse_parsing(efuse, map);
+		break;
+	default:
+		/* unsupported now */
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+#define BIT_CFENDFORM		BIT(9)
+#define BIT_WMAC_TCR_ERR0	BIT(12)
+#define BIT_WMAC_TCR_ERR1	BIT(13)
+#define BIT_TCR_CFG		(BIT_CFENDFORM | BIT_WMAC_TCR_ERR0 |	       \
+				 BIT_WMAC_TCR_ERR1)
+#define WLAN_RX_FILTER0		0xFFFF
+#define WLAN_RX_FILTER1		0x400
+#define WLAN_RX_FILTER2		0xFFFF
+#define WLAN_RCR_CFG		0x700060CE
+
+static int rtw8723d_mac_init(struct rtw_dev *rtwdev)
+{
+	rtw_write8(rtwdev, REG_FWHW_TXQ_CTRL + 1, WLAN_TXQ_RPT_EN);
+	rtw_write32(rtwdev, REG_TCR, BIT_TCR_CFG);
+
+	rtw_write16(rtwdev, REG_RXFLTMAP0, WLAN_RX_FILTER0);
+	rtw_write16(rtwdev, REG_RXFLTMAP1, WLAN_RX_FILTER1);
+	rtw_write16(rtwdev, REG_RXFLTMAP2, WLAN_RX_FILTER2);
+	rtw_write32(rtwdev, REG_RCR, WLAN_RCR_CFG);
+
+	rtw_write32(rtwdev, REG_INT_MIG, 0);
+	rtw_write32(rtwdev, REG_MCUTST_1, 0x0);
+
+	rtw_write8(rtwdev, REG_MISC_CTRL, BIT_DIS_SECOND_CCA);
+	rtw_write8(rtwdev, REG_2ND_CCA_CTRL, 0);
+
+	return 0;
+}
+
+static void rtw8723d_cfg_ldo25(struct rtw_dev *rtwdev, bool enable)
+{
+	u8 ldo_pwr;
+
+	ldo_pwr = rtw_read8(rtwdev, REG_LDO_EFUSE_CTRL + 3);
+	if (enable) {
+		ldo_pwr &= ~BIT_MASK_LDO25_VOLTAGE;
+		ldo_pwr = (BIT_LDO25_VOLTAGE_V25 << 4) | BIT_LDO25_EN;
+	} else {
+		ldo_pwr &= ~BIT_LDO25_EN;
+	}
+	rtw_write8(rtwdev, REG_LDO_EFUSE_CTRL + 3, ldo_pwr);
+}
+
+static void
+rtw8723d_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs)
+{
+	struct rtw_hal *hal = &rtwdev->hal;
+	const struct rtw_hw_reg *txagc;
+	u8 rate, pwr_index;
+	int j;
+
+	for (j = 0; j < rtw_rate_size[rs]; j++) {
+		rate = rtw_rate_section[rs][j];
+		pwr_index = hal->tx_pwr_tbl[path][rate];
+
+		if (rate >= ARRAY_SIZE(rtw8723d_txagc)) {
+			rtw_warn(rtwdev, "rate 0x%x isn't supported\n", rate);
+			continue;
+		}
+		txagc = &rtw8723d_txagc[rate];
+		if (!txagc->addr) {
+			rtw_warn(rtwdev, "rate 0x%x isn't defined\n", rate);
+			continue;
+		}
+
+		rtw_write32_mask(rtwdev, txagc->addr, txagc->mask, pwr_index);
+	}
+}
+
+static void rtw8723d_set_tx_power_index(struct rtw_dev *rtwdev)
+{
+	struct rtw_hal *hal = &rtwdev->hal;
+	int rs, path;
+
+	for (path = 0; path < hal->rf_path_num; path++) {
+		for (rs = 0; rs <= RTW_RATE_SECTION_HT_1S; rs++)
+			rtw8723d_set_tx_power_index_by_rate(rtwdev, path, rs);
+	}
+}
+
+static void rtw8723d_efuse_grant(struct rtw_dev *rtwdev, bool on)
+{
+	if (on) {
+		rtw_write8(rtwdev, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON);
+
+		rtw_write16_set(rtwdev, REG_SYS_FUNC_EN, BIT_FEN_ELDR);
+		rtw_write16_set(rtwdev, REG_SYS_CLKR, BIT_LOADER_CLK_EN | BIT_ANA8M);
+	} else {
+		rtw_write8(rtwdev, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF);
+	}
+}
+
+static struct rtw_chip_ops rtw8723d_ops = {
+	.phy_set_param		= rtw8723d_phy_set_param,
+	.read_efuse		= rtw8723d_read_efuse,
+	.mac_init		= rtw8723d_mac_init,
+	.read_rf		= rtw_phy_read_rf_sipi,
+	.write_rf		= rtw_phy_write_rf_reg_sipi,
+	.set_tx_power_index	= rtw8723d_set_tx_power_index,
+	.set_antenna		= NULL,
+	.cfg_ldo25		= rtw8723d_cfg_ldo25,
+	.efuse_grant		= rtw8723d_efuse_grant,
+	.config_bfee		= NULL,
+	.set_gid_table		= NULL,
+	.cfg_csi_rate		= NULL,
+};
+
+static const struct rtw_pwr_seq_cmd trans_carddis_to_cardemu_8723d[] = {
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(3) | BIT(7), 0},
+	{0x0086,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_SDIO,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0x0086,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_SDIO,
+	 RTW_PWR_CMD_POLLING, BIT(1), BIT(1)},
+	{0x004A,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(3) | BIT(4), 0},
+	{0x0023,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(4), 0},
+	{0x0301,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0},
+	{0xFFFF,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 0,
+	 RTW_PWR_CMD_END, 0, 0},
+};
+
+static const struct rtw_pwr_seq_cmd trans_cardemu_to_act_8723d[] = {
+	{0x0020,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0001,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_DELAY, 1, RTW_PWR_DELAY_MS},
+	{0x0000,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(5), 0},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, (BIT(4) | BIT(3) | BIT(2)), 0},
+	{0x0075,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0006,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, BIT(1), BIT(1)},
+	{0x0075,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0x0006,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, (BIT(1) | BIT(0)), 0},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(7), 0},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, (BIT(4) | BIT(3)), 0},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, BIT(0), 0},
+	{0x0010,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(6), BIT(6)},
+	{0x0049,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), BIT(1)},
+	{0x0063,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), BIT(1)},
+	{0x0062,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), 0},
+	{0x0058,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x005A,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), BIT(1)},
+	{0x0068,
+	 RTW_PWR_CUT_TEST_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(3), BIT(3)},
+	{0x0069,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(6), BIT(6)},
+	{0x001f,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0x00},
+	{0x0077,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0x00},
+	{0x001f,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0x07},
+	{0x0077,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0x07},
+	{0xFFFF,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 0,
+	 RTW_PWR_CMD_END, 0, 0},
+};
+
+static const struct rtw_pwr_seq_cmd *card_enable_flow_8723d[] = {
+	trans_carddis_to_cardemu_8723d,
+	trans_cardemu_to_act_8723d,
+	NULL
+};
+
+static const struct rtw_pwr_seq_cmd trans_act_to_lps_8723d[] = {
+	{0x0301,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0xFF},
+	{0x0522,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0xFF},
+	{0x05F8,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, 0xFF, 0},
+	{0x05F9,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, 0xFF, 0},
+	{0x05FA,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, 0xFF, 0},
+	{0x05FB,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, 0xFF, 0},
+	{0x0002,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0x0002,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_DELAY, 0, RTW_PWR_DELAY_US},
+	{0x0002,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), 0},
+	{0x0100,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0x03},
+	{0x0101,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), 0},
+	{0x0093,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0x00},
+	{0x0553,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(5), BIT(5)},
+	{0xFFFF,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 0,
+	 RTW_PWR_CMD_END, 0, 0},
+};
+
+static const struct rtw_pwr_seq_cmd trans_act_to_pre_carddis_8723d[] = {
+	{0x0003,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(2), 0},
+	{0x0080,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0},
+	{0xFFFF,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 0,
+	 RTW_PWR_CMD_END, 0, 0},
+};
+
+static const struct rtw_pwr_seq_cmd trans_act_to_cardemu_8723d[] = {
+	{0x0002,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0x0049,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), 0},
+	{0x0006,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), BIT(1)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, BIT(1), 0},
+	{0x0010,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(6), 0},
+	{0x0000,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(5), BIT(5)},
+	{0x0020,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0xFFFF,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 0,
+	 RTW_PWR_CMD_END, 0, 0},
+};
+
+static const struct rtw_pwr_seq_cmd trans_cardemu_to_carddis_8723d[] = {
+	{0x0007,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0x20},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(2), BIT(2)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)},
+	{0x004A,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 1},
+	{0x0023,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(4), BIT(4)},
+	{0x0086,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_SDIO,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0086,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_SDIO,
+	 RTW_PWR_CMD_POLLING, BIT(1), 0},
+	{0xFFFF,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 0,
+	 RTW_PWR_CMD_END, 0, 0},
+};
+
+static const struct rtw_pwr_seq_cmd trans_act_to_post_carddis_8723d[] = {
+	{0x001D,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0x001D,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x001C,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0x0E},
+	{0xFFFF,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 0,
+	 RTW_PWR_CMD_END, 0, 0},
+};
+
+static const struct rtw_pwr_seq_cmd *card_disable_flow_8723d[] = {
+	trans_act_to_lps_8723d,
+	trans_act_to_pre_carddis_8723d,
+	trans_act_to_cardemu_8723d,
+	trans_cardemu_to_carddis_8723d,
+	trans_act_to_post_carddis_8723d,
+	NULL
+};
+
+static const struct rtw_page_table page_table_8723d[] = {
+	{12, 2, 2, 0, 1},
+	{12, 2, 2, 0, 1},
+	{12, 2, 2, 0, 1},
+	{12, 2, 2, 0, 1},
+	{12, 2, 2, 0, 1},
+};
+
+static const struct rtw_rqpn rqpn_table_8723d[] = {
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_LOW, RTW_DMA_MAPPING_LOW,
+	 RTW_DMA_MAPPING_EXTRA, RTW_DMA_MAPPING_HIGH},
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_LOW, RTW_DMA_MAPPING_LOW,
+	 RTW_DMA_MAPPING_EXTRA, RTW_DMA_MAPPING_HIGH},
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_HIGH,
+	 RTW_DMA_MAPPING_HIGH, RTW_DMA_MAPPING_HIGH},
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_LOW, RTW_DMA_MAPPING_LOW,
+	 RTW_DMA_MAPPING_HIGH, RTW_DMA_MAPPING_HIGH},
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_LOW, RTW_DMA_MAPPING_LOW,
+	 RTW_DMA_MAPPING_EXTRA, RTW_DMA_MAPPING_HIGH},
+};
+
+static const struct rtw_rf_sipi_addr rtw8723d_rf_sipi_addr[] = {
+	[RF_PATH_A] = { .hssi_1 = 0x820, .lssi_read    = 0x8a0,
+			.hssi_2 = 0x824, .lssi_read_pi = 0x8b8},
+	[RF_PATH_B] = { .hssi_1 = 0x828, .lssi_read    = 0x8a4,
+			.hssi_2 = 0x82c, .lssi_read_pi = 0x8bc},
+};
+
+static const struct rtw_rfe_def rtw8723d_rfe_defs[] = {
+	[0] = { .phy_pg_tbl	= &rtw8723d_bb_pg_tbl,
+		.txpwr_lmt_tbl	= &rtw8723d_txpwr_lmt_tbl,},
+};
+
+struct rtw_chip_info rtw8723d_hw_spec = {
+	.ops = &rtw8723d_ops,
+	.id = RTW_CHIP_TYPE_8723D,
+	.fw_name = "rtw88/rtw8723d_fw.bin",
+	.wlan_cpu = RTW_WCPU_11N,
+	.tx_pkt_desc_sz = 40,
+	.tx_buf_desc_sz = 16,
+	.rx_pkt_desc_sz = 24,
+	.rx_buf_desc_sz = 8,
+	.phy_efuse_size = 512,
+	.log_efuse_size = 512,
+	.ptct_efuse_size = 96 + 1,
+	.txff_size = 32768,
+	.rxff_size = 16384,
+	.txgi_factor = 1,
+	.is_pwr_by_rate_dec = true,
+	.max_power_index = 0x3f,
+	.csi_buf_pg_num = 0,
+	.band = RTW_BAND_2G,
+	.page_size = 128,
+	.ht_supported = true,
+	.vht_supported = false,
+	.lps_deep_mode_supported = 0,
+	.sys_func_en = 0xFD,
+	.pwr_on_seq = card_enable_flow_8723d,
+	.pwr_off_seq = card_disable_flow_8723d,
+	.page_table = page_table_8723d,
+	.rqpn_table = rqpn_table_8723d,
+	.rf_sipi_addr = {0x840, 0x844},
+	.rf_sipi_read_addr = rtw8723d_rf_sipi_addr,
+	.fix_rf_phy_num = 2,
+	.mac_tbl = &rtw8723d_mac_tbl,
+	.agc_tbl = &rtw8723d_agc_tbl,
+	.bb_tbl = &rtw8723d_bb_tbl,
+	.rf_tbl = {&rtw8723d_rf_a_tbl},
+	.rfe_defs = rtw8723d_rfe_defs,
+	.rfe_defs_size = ARRAY_SIZE(rtw8723d_rfe_defs),
+};
+EXPORT_SYMBOL(rtw8723d_hw_spec);
+
+MODULE_FIRMWARE("rtw88/rtw8723d_fw.bin");
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723d.h b/drivers/net/wireless/realtek/rtw88/rtw8723d.h
new file mode 100644
index 000000000000..6321dea83519
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/rtw8723d.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/* Copyright(c) 2018-2019  Realtek Corporation
+ */
+
+#ifndef __RTW8723D_H__
+#define __RTW8723D_H__
+
+struct rtw8723de_efuse {
+	u8 mac_addr[ETH_ALEN];		/* 0xd0 */
+	u8 vender_id[2];
+	u8 device_id[2];
+	u8 sub_vender_id[2];
+	u8 sub_device_id[2];
+};
+
+struct rtw8723d_efuse {
+	__le16 rtl_id;
+	u8 rsvd[2];
+	u8 afe;
+	u8 rsvd1[11];
+
+	/* power index for four RF paths */
+	struct rtw_txpwr_idx txpwr_idx_table[4];
+
+	u8 channel_plan;		/* 0xb8 */
+	u8 xtal_k;
+	u8 thermal_meter;
+	u8 iqk_lck;
+	u8 pa_type;			/* 0xbc */
+	u8 lna_type_2g[2];		/* 0xbd */
+	u8 lna_type_5g[2];
+	u8 rf_board_option;
+	u8 rf_feature_option;
+	u8 rf_bt_setting;
+	u8 eeprom_version;
+	u8 eeprom_customer_id;
+	u8 tx_bb_swing_setting_2g;
+	u8 res_c7;
+	u8 tx_pwr_calibrate_rate;
+	u8 rf_antenna_option;		/* 0xc9 */
+	u8 rfe_option;
+	u8 country_code[2];
+	u8 res[3];
+	struct rtw8723de_efuse e;
+};
+
+#define REG_OFDM0_XAAGC1	0x0c50
+#define REG_OFDM0_XBAGC1	0x0c58
+
+#endif
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723d_table.c b/drivers/net/wireless/realtek/rtw88/rtw8723d_table.c
new file mode 100644
index 000000000000..27a22b392df0
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/rtw8723d_table.c
@@ -0,0 +1,1196 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright(c) 2018-2019  Realtek Corporation
+ */
+
+#include "main.h"
+#include "phy.h"
+#include "rtw8723d_table.h"
+
+static const u32 rtw8723d_mac[] = {
+	0x020, 0x00000013,
+	0x02F, 0x00000010,
+	0x077, 0x00000007,
+	0x421, 0x0000000F,
+	0x428, 0x0000000A,
+	0x429, 0x00000010,
+	0x430, 0x00000000,
+	0x431, 0x00000000,
+	0x432, 0x00000000,
+	0x433, 0x00000001,
+	0x434, 0x00000002,
+	0x435, 0x00000003,
+	0x436, 0x00000005,
+	0x437, 0x00000007,
+	0x438, 0x00000000,
+	0x439, 0x00000000,
+	0x43A, 0x00000000,
+	0x43B, 0x00000001,
+	0x43C, 0x00000002,
+	0x43D, 0x00000003,
+	0x43E, 0x00000005,
+	0x43F, 0x00000007,
+	0x440, 0x0000005D,
+	0x441, 0x00000001,
+	0x442, 0x00000000,
+	0x444, 0x00000010,
+	0x445, 0x00000000,
+	0x446, 0x00000000,
+	0x447, 0x00000000,
+	0x448, 0x00000000,
+	0x449, 0x000000F0,
+	0x44A, 0x0000000F,
+	0x44B, 0x0000003E,
+	0x44C, 0x00000010,
+	0x44D, 0x00000000,
+	0x44E, 0x00000000,
+	0x44F, 0x00000000,
+	0x450, 0x00000000,
+	0x451, 0x000000F0,
+	0x452, 0x0000000F,
+	0x453, 0x00000000,
+	0x456, 0x0000005E,
+	0x460, 0x00000066,
+	0x461, 0x00000066,
+	0x4C8, 0x000000FF,
+	0x4C9, 0x00000008,
+	0x4CC, 0x000000FF,
+	0x4CD, 0x000000FF,
+	0x4CE, 0x00000001,
+	0x500, 0x00000026,
+	0x501, 0x000000A2,
+	0x502, 0x0000002F,
+	0x503, 0x00000000,
+	0x504, 0x00000028,
+	0x505, 0x000000A3,
+	0x506, 0x0000005E,
+	0x507, 0x00000000,
+	0x508, 0x0000002B,
+	0x509, 0x000000A4,
+	0x50A, 0x0000005E,
+	0x50B, 0x00000000,
+	0x50C, 0x0000004F,
+	0x50D, 0x000000A4,
+	0x50E, 0x00000000,
+	0x50F, 0x00000000,
+	0x512, 0x0000001C,
+	0x514, 0x0000000A,
+	0x516, 0x0000000A,
+	0x525, 0x0000004F,
+	0x550, 0x00000010,
+	0x551, 0x00000010,
+	0x559, 0x00000002,
+	0x55C, 0x00000028,
+	0x55D, 0x000000FF,
+	0x605, 0x00000030,
+	0x608, 0x0000000E,
+	0x609, 0x0000002A,
+	0x620, 0x000000FF,
+	0x621, 0x000000FF,
+	0x622, 0x000000FF,
+	0x623, 0x000000FF,
+	0x624, 0x000000FF,
+	0x625, 0x000000FF,
+	0x626, 0x000000FF,
+	0x627, 0x000000FF,
+	0x638, 0x00000028,
+	0x63C, 0x0000000A,
+	0x63D, 0x0000000A,
+	0x63E, 0x0000000C,
+	0x63F, 0x0000000C,
+	0x640, 0x00000040,
+	0x642, 0x00000040,
+	0x643, 0x00000000,
+	0x652, 0x000000C8,
+	0x66A, 0x000000B0,
+	0x66E, 0x00000005,
+	0x700, 0x00000021,
+	0x701, 0x00000043,
+	0x702, 0x00000065,
+	0x703, 0x00000087,
+	0x708, 0x00000021,
+	0x709, 0x00000043,
+	0x70A, 0x00000065,
+	0x70B, 0x00000087,
+	0x765, 0x00000018,
+	0x76E, 0x00000004,
+	0x7C0, 0x00000038,
+	0x7C2, 0x0000000F,
+	0x7C3, 0x000000C0,
+	0x073, 0x00000004,
+	0x7C4, 0x00000077,
+	0x07C, 0x00000003,
+	0x016, 0x000000B3,
+};
+
+RTW_DECL_TABLE_PHY_COND(rtw8723d_mac, rtw_phy_cfg_mac);
+
+static const u32 rtw8723d_agc[] = {
+	0xC78, 0xFE000101,
+	0xC78, 0xFD010101,
+	0xC78, 0xFC020101,
+	0xC78, 0xFB030101,
+	0xC78, 0xFA040101,
+	0xC78, 0xF9050101,
+	0xC78, 0xF8060101,
+	0xC78, 0xF7070101,
+	0xC78, 0xF6080101,
+	0xC78, 0xF5090101,
+	0xC78, 0xF40A0101,
+	0xC78, 0xF30B0101,
+	0xC78, 0xF20C0101,
+	0xC78, 0xF10D0101,
+	0xC78, 0xF00E0101,
+	0xC78, 0xEF0F0101,
+	0xC78, 0xEE100101,
+	0xC78, 0xED110101,
+	0xC78, 0xEC120101,
+	0xC78, 0xEB130101,
+	0xC78, 0xEA140101,
+	0xC78, 0xE9150101,
+	0xC78, 0xE8160101,
+	0xC78, 0xE7170101,
+	0xC78, 0xE6180101,
+	0xC78, 0xE5190101,
+	0xC78, 0xE41A0101,
+	0xC78, 0xE31B0101,
+	0xC78, 0xE21C0101,
+	0xC78, 0xE11D0101,
+	0xC78, 0xE01E0101,
+	0xC78, 0x861F0101,
+	0xC78, 0x85200101,
+	0xC78, 0x84210101,
+	0xC78, 0x83220101,
+	0xC78, 0x82230101,
+	0xC78, 0x81240101,
+	0xC78, 0x80250101,
+	0xC78, 0x44260101,
+	0xC78, 0x43270101,
+	0xC78, 0x42280101,
+	0xC78, 0x41290101,
+	0xC78, 0x402A0101,
+	0xC78, 0x022B0101,
+	0xC78, 0x012C0101,
+	0xC78, 0x002D0101,
+	0xC78, 0xC52E0001,
+	0xC78, 0xC42F0001,
+	0xC78, 0xC3300001,
+	0xC78, 0xC2310001,
+	0xC78, 0xC1320001,
+	0xC78, 0xC0330001,
+	0xC78, 0x04340001,
+	0xC78, 0x03350001,
+	0xC78, 0x02360001,
+	0xC78, 0x01370001,
+	0xC78, 0x00380001,
+	0xC78, 0x00390001,
+	0xC78, 0x003A0001,
+	0xC78, 0x003B0001,
+	0xC78, 0x003C0001,
+	0xC78, 0x003D0001,
+	0xC78, 0x003E0001,
+	0xC78, 0x003F0001,
+	0xC78, 0x6F002001,
+	0xC78, 0x6F012001,
+	0xC78, 0x6F022001,
+	0xC78, 0x6F032001,
+	0xC78, 0x6F042001,
+	0xC78, 0x6F052001,
+	0xC78, 0x6F062001,
+	0xC78, 0x6F072001,
+	0xC78, 0x6F082001,
+	0xC78, 0x6F092001,
+	0xC78, 0x6F0A2001,
+	0xC78, 0x6F0B2001,
+	0xC78, 0x6F0C2001,
+	0xC78, 0x6F0D2001,
+	0xC78, 0x6F0E2001,
+	0xC78, 0x6F0F2001,
+	0xC78, 0x6F102001,
+	0xC78, 0x6F112001,
+	0xC78, 0x6F122001,
+	0xC78, 0x6F132001,
+	0xC78, 0x6F142001,
+	0xC78, 0x6F152001,
+	0xC78, 0x6F162001,
+	0xC78, 0x6F172001,
+	0xC78, 0x6F182001,
+	0xC78, 0x6F192001,
+	0xC78, 0x6F1A2001,
+	0xC78, 0x6F1B2001,
+	0xC78, 0x6F1C2001,
+	0xC78, 0x6F1D2001,
+	0xC78, 0x6F1E2001,
+	0xC78, 0x6F1F2001,
+	0xC78, 0x6F202001,
+	0xC78, 0x6F212001,
+	0xC78, 0x6F222001,
+	0xC78, 0x6F232001,
+	0xC78, 0x6E242001,
+	0xC78, 0x6D252001,
+	0xC78, 0x6C262001,
+	0xC78, 0x6B272001,
+	0xC78, 0x6A282001,
+	0xC78, 0x69292001,
+	0xC78, 0x4B2A2001,
+	0xC78, 0x4A2B2001,
+	0xC78, 0x492C2001,
+	0xC78, 0x482D2001,
+	0xC78, 0x472E2001,
+	0xC78, 0x462F2001,
+	0xC78, 0x45302001,
+	0xC78, 0x44312001,
+	0xC78, 0x43322001,
+	0xC78, 0x42332001,
+	0xC78, 0x41342001,
+	0xC78, 0x40352001,
+	0xC78, 0x02362001,
+	0xC78, 0x01372001,
+	0xC78, 0x00382001,
+	0xC78, 0x00392001,
+	0xC78, 0x003A2001,
+	0xC78, 0x003B2001,
+	0xC78, 0x003C2001,
+	0xC78, 0x003D2001,
+	0xC78, 0x003E2001,
+	0xC78, 0x003F2001,
+	0xC78, 0x7F003101,
+	0xC78, 0x7F013101,
+	0xC78, 0x7F023101,
+	0xC78, 0x7F033101,
+	0xC78, 0x7F043101,
+	0xC78, 0x7F053101,
+	0xC78, 0x7F063101,
+	0xC78, 0x7F073101,
+	0xC78, 0x7E083101,
+	0xC78, 0x7D093101,
+	0xC78, 0x7C0A3101,
+	0xC78, 0x7B0B3101,
+	0xC78, 0x7A0C3101,
+	0xC78, 0x790D3101,
+	0xC78, 0x780E3101,
+	0xC78, 0x770F3101,
+	0xC78, 0x76103101,
+	0xC78, 0x75113101,
+	0xC78, 0x74123101,
+	0xC78, 0x73133101,
+	0xC78, 0x72143101,
+	0xC78, 0x71153101,
+	0xC78, 0x70163101,
+	0xC78, 0x6F173101,
+	0xC78, 0x6E183101,
+	0xC78, 0x6D193101,
+	0xC78, 0x6C1A3101,
+	0xC78, 0x6B1B3101,
+	0xC78, 0x6A1C3101,
+	0xC78, 0x691D3101,
+	0xC78, 0x681E3101,
+	0xC78, 0x4B1F3101,
+	0xC78, 0x4A203101,
+	0xC78, 0x49213101,
+	0xC78, 0x48223101,
+	0xC78, 0x47233101,
+	0xC78, 0x46243101,
+	0xC78, 0x45253101,
+	0xC78, 0x44263101,
+	0xC78, 0x43273101,
+	0xC78, 0x42283101,
+	0xC78, 0x41293101,
+	0xC78, 0x402A3101,
+	0xC78, 0x022B3101,
+	0xC78, 0x012C3101,
+	0xC78, 0x002D3101,
+	0xC78, 0x002E3101,
+	0xC78, 0x002F3101,
+	0xC78, 0x00303101,
+	0xC78, 0x00313101,
+	0xC78, 0x00323101,
+	0xC78, 0x00333101,
+	0xC78, 0x00343101,
+	0xC78, 0x00353101,
+	0xC78, 0x00363101,
+	0xC78, 0x00373101,
+	0xC78, 0x00383101,
+	0xC78, 0x00393101,
+	0xC78, 0x003A3101,
+	0xC78, 0x003B3101,
+	0xC78, 0x003C3101,
+	0xC78, 0x003D3101,
+	0xC78, 0x003E3101,
+	0xC78, 0x003F3101,
+	0xC78, 0xFE403101,
+	0xC78, 0xFD413101,
+	0xC78, 0xFC423101,
+	0xC78, 0xFB433101,
+	0xC78, 0xFA443101,
+	0xC78, 0xF9453101,
+	0xC78, 0xF8463101,
+	0xC78, 0xF7473101,
+	0xC78, 0xF6483101,
+	0xC78, 0xF5493101,
+	0xC78, 0xF44A3101,
+	0xC78, 0xF34B3101,
+	0xC78, 0xF24C3101,
+	0xC78, 0xF14D3101,
+	0xC78, 0xF04E3101,
+	0xC78, 0xEF4F3101,
+	0xC78, 0xEE503101,
+	0xC78, 0xED513101,
+	0xC78, 0xEC523101,
+	0xC78, 0xEB533101,
+	0xC78, 0xEA543101,
+	0xC78, 0xE9553101,
+	0xC78, 0xE8563101,
+	0xC78, 0xE7573101,
+	0xC78, 0xE6583101,
+	0xC78, 0xE5593101,
+	0xC78, 0xE45A3101,
+	0xC78, 0xE35B3101,
+	0xC78, 0xE25C3101,
+	0xC78, 0xE15D3101,
+	0xC78, 0xE05E3101,
+	0xC78, 0x865F3101,
+	0xC78, 0x85603101,
+	0xC78, 0x84613101,
+	0xC78, 0x83623101,
+	0xC78, 0x82633101,
+	0xC78, 0x81643101,
+	0xC78, 0x80653101,
+	0xC78, 0x80663101,
+	0xC78, 0x80673101,
+	0xC78, 0x80683101,
+	0xC78, 0x80693101,
+	0xC78, 0x806A3101,
+	0xC78, 0x806B3101,
+	0xC78, 0x806C3101,
+	0xC78, 0x806D3101,
+	0xC78, 0x806E3101,
+	0xC78, 0x806F3101,
+	0xC78, 0x80703101,
+	0xC78, 0x80713101,
+	0xC78, 0x80723101,
+	0xC78, 0x80733101,
+	0xC78, 0x80743101,
+	0xC78, 0x80753101,
+	0xC78, 0x80763101,
+	0xC78, 0x80773101,
+	0xC78, 0x80783101,
+	0xC78, 0x80793101,
+	0xC78, 0x807A3101,
+	0xC78, 0x807B3101,
+	0xC78, 0x807C3101,
+	0xC78, 0x807D3101,
+	0xC78, 0x807E3101,
+	0xC78, 0x807F3101,
+	0xC78, 0xEF402001,
+	0xC78, 0xEF412001,
+	0xC78, 0xEF422001,
+	0xC78, 0xEF432001,
+	0xC78, 0xEF442001,
+	0xC78, 0xEF452001,
+	0xC78, 0xEF462001,
+	0xC78, 0xEF472001,
+	0xC78, 0xEF482001,
+	0xC78, 0xEF492001,
+	0xC78, 0xEF4A2001,
+	0xC78, 0xEF4B2001,
+	0xC78, 0xEF4C2001,
+	0xC78, 0xEF4D2001,
+	0xC78, 0xEF4E2001,
+	0xC78, 0xEF4F2001,
+	0xC78, 0xEF502001,
+	0xC78, 0xEF512001,
+	0xC78, 0xEF522001,
+	0xC78, 0xEF532001,
+	0xC78, 0xEF542001,
+	0xC78, 0xEF552001,
+	0xC78, 0xEF562001,
+	0xC78, 0xEF572001,
+	0xC78, 0xEF582001,
+	0xC78, 0xEF592001,
+	0xC78, 0xEF5A2001,
+	0xC78, 0xEF5B2001,
+	0xC78, 0xEF5C2001,
+	0xC78, 0xEF5D2001,
+	0xC78, 0xEF5E2001,
+	0xC78, 0xEF5F2001,
+	0xC78, 0xEF602001,
+	0xC78, 0xEE612001,
+	0xC78, 0xED622001,
+	0xC78, 0xEC632001,
+	0xC78, 0xEB642001,
+	0xC78, 0xEA652001,
+	0xC78, 0xE9662001,
+	0xC78, 0xE8672001,
+	0xC78, 0xCB682001,
+	0xC78, 0xCA692001,
+	0xC78, 0xC96A2001,
+	0xC78, 0xC86B2001,
+	0xC78, 0xC76C2001,
+	0xC78, 0xC66D2001,
+	0xC78, 0xC56E2001,
+	0xC78, 0xC46F2001,
+	0xC78, 0xC3702001,
+	0xC78, 0xC2712001,
+	0xC78, 0xC1722001,
+	0xC78, 0xC0732001,
+	0xC78, 0x82742001,
+	0xC78, 0x81752001,
+	0xC78, 0x80762001,
+	0xC78, 0x80772001,
+	0xC78, 0x80782001,
+	0xC78, 0x80792001,
+	0xC78, 0x807A2001,
+	0xC78, 0x807B2001,
+	0xC78, 0x807C2001,
+	0xC78, 0x807D2001,
+	0xC78, 0x807E2001,
+	0xC78, 0x807F2001,
+	0xC78, 0xFA001101,
+	0xC78, 0xF9011101,
+	0xC78, 0xF8021101,
+	0xC78, 0xF7031101,
+	0xC78, 0xF6041101,
+	0xC78, 0xF5051101,
+	0xC78, 0xF4061101,
+	0xC78, 0xD7071101,
+	0xC78, 0xD6081101,
+	0xC78, 0xD5091101,
+	0xC78, 0xD40A1101,
+	0xC78, 0x970B1101,
+	0xC78, 0x960C1101,
+	0xC78, 0x950D1101,
+	0xC78, 0x940E1101,
+	0xC78, 0x930F1101,
+	0xC78, 0x92101101,
+	0xC78, 0x91111101,
+	0xC78, 0x90121101,
+	0xC78, 0x8F131101,
+	0xC78, 0x8E141101,
+	0xC78, 0x8D151101,
+	0xC78, 0x8C161101,
+	0xC78, 0x8B171101,
+	0xC78, 0x8A181101,
+	0xC78, 0x89191101,
+	0xC78, 0x881A1101,
+	0xC78, 0x871B1101,
+	0xC78, 0x861C1101,
+	0xC78, 0x851D1101,
+	0xC78, 0x841E1101,
+	0xC78, 0x831F1101,
+	0xC78, 0x82201101,
+	0xC78, 0x81211101,
+	0xC78, 0x80221101,
+	0xC78, 0x43231101,
+	0xC78, 0x42241101,
+	0xC78, 0x41251101,
+	0xC78, 0x04261101,
+	0xC78, 0x03271101,
+	0xC78, 0x02281101,
+	0xC78, 0x01291101,
+	0xC78, 0x002A1101,
+	0xC78, 0xC42B1001,
+	0xC78, 0xC32C1001,
+	0xC78, 0xC22D1001,
+	0xC78, 0xC12E1001,
+	0xC78, 0xC02F1001,
+	0xC78, 0x85301001,
+	0xC78, 0x84311001,
+	0xC78, 0x83321001,
+	0xC78, 0x82331001,
+	0xC78, 0x81341001,
+	0xC78, 0x80351001,
+	0xC78, 0x05361001,
+	0xC78, 0x04371001,
+	0xC78, 0x03381001,
+	0xC78, 0x02391001,
+	0xC78, 0x013A1001,
+	0xC78, 0x003B1001,
+	0xC78, 0x003C1001,
+	0xC78, 0x003D1001,
+	0xC78, 0x003E1001,
+	0xC78, 0x003F1001,
+	0xC50, 0x69553422,
+	0xC50, 0x69553420,
+};
+
+RTW_DECL_TABLE_PHY_COND(rtw8723d_agc, rtw_phy_cfg_agc);
+
+static const u32 rtw8723d_bb[] = {
+	0x800, 0x80046C00,
+	0x804, 0x00000003,
+	0x808, 0x0000FC00,
+	0x80C, 0x0000000A,
+	0x810, 0x10001331,
+	0x814, 0x020C3D10,
+	0x818, 0x00200385,
+	0x81C, 0x00000000,
+	0x820, 0x01000100,
+	0x824, 0x00390204,
+	0x828, 0x00000000,
+	0x82C, 0x00000000,
+	0x830, 0x00000000,
+	0x834, 0x00000000,
+	0x838, 0x00000000,
+	0x83C, 0x00000000,
+	0x840, 0x00010000,
+	0x844, 0x00000000,
+	0x848, 0x00000000,
+	0x84C, 0x00000000,
+	0x850, 0x00000000,
+	0x854, 0x00000000,
+	0x858, 0x569A11A9,
+	0x85C, 0x01000014,
+	0x860, 0x66F60110,
+	0x864, 0x461F0641,
+	0x868, 0x00000000,
+	0x86C, 0x27272700,
+	0x870, 0x07000460,
+	0x874, 0x25004000,
+	0x878, 0x00000808,
+	0x87C, 0x004F0201,
+	0x880, 0xB2002E12,
+	0x884, 0x00000007,
+	0x888, 0x00000000,
+	0x88C, 0xCCC000C0,
+	0x890, 0x00000800,
+	0x894, 0xFFFFFFFE,
+	0x898, 0x40302010,
+	0x89C, 0x00706050,
+	0x900, 0x00000000,
+	0x904, 0x00000023,
+	0x908, 0x00000000,
+	0x90C, 0x81121111,
+	0x910, 0x00000402,
+	0x914, 0x00000300,
+	0x920, 0x18C6318C,
+	0x924, 0x0000018C,
+	0x948, 0x99000000,
+	0x94C, 0x00000010,
+	0x950, 0x00003800,
+	0x954, 0x5A380000,
+	0x958, 0x4BC6D87A,
+	0x95C, 0x04EB9B79,
+	0x96C, 0x00000003,
+	0x970, 0x00000000,
+	0x974, 0x00000000,
+	0x978, 0x00000000,
+	0x97C, 0x13000000,
+	0x980, 0x00000000,
+	0xA00, 0x00D046C8,
+	0xA04, 0x80FF800C,
+	0xA08, 0x8C838300,
+	0xA0C, 0x2E20100F,
+	0xA10, 0x9500BB78,
+	0xA14, 0x1114D028,
+	0xA18, 0x00881117,
+	0xA1C, 0x89140F00,
+	0xA20, 0xE82C0001,
+	0xA24, 0x64B80C1C,
+	0xA28, 0x00008810,
+	0xA2C, 0x00D30000,
+	0xA70, 0x101FBF00,
+	0xA74, 0x00000007,
+	0xA78, 0x00008900,
+	0xA7C, 0x225B0606,
+	0xA80, 0x2180FA74,
+	0xA84, 0x00200000,
+	0xA88, 0x040C0000,
+	0xA8C, 0x12345678,
+	0xA90, 0xABCDEF00,
+	0xA94, 0x001B1B89,
+	0xA98, 0x00000000,
+	0xA9C, 0x00020000,
+	0xAA0, 0x00000000,
+	0xAA4, 0x0000000C,
+	0xAA8, 0xCA100008,
+	0xAAC, 0x01235667,
+	0xAB0, 0x00000000,
+	0xAB4, 0x20201402,
+	0xB2C, 0x00000000,
+	0xC00, 0x48071D40,
+	0xC04, 0x03A05611,
+	0xC08, 0x000000E4,
+	0xC0C, 0x6C6C6C6C,
+	0xC10, 0x28800000,
+	0xC14, 0x40000100,
+	0xC18, 0x08800000,
+	0xC1C, 0x40000100,
+	0xC20, 0x00000000,
+	0xC24, 0x00000000,
+	0xC28, 0x00000000,
+	0xC2C, 0x00000000,
+	0xC30, 0x69E9AC48,
+	0xC34, 0x31000040,
+	0xC38, 0x21688080,
+	0xC3C, 0x000016D4,
+	0xC40, 0x1F78403F,
+	0xC44, 0x00010036,
+	0xC48, 0xEC020107,
+	0xC4C, 0x007F037F,
+	0xC50, 0x69553420,
+	0xC54, 0x43BC0094,
+	0xC58, 0x00015969,
+	0xC5C, 0x00310492,
+	0xC60, 0x00280A00,
+	0xC64, 0x7112848B,
+	0xC68, 0x47C074FF,
+	0xC6C, 0x00000036,
+	0xC70, 0x2C7F000D,
+	0xC74, 0x020600DB,
+	0xC78, 0x0000001F,
+	0xC7C, 0x00B91612,
+	0xC80, 0x390000E4,
+	0xC84, 0x21F60000,
+	0xC88, 0x40000100,
+	0xC8C, 0x20200000,
+	0xC90, 0x00091521,
+	0xC94, 0x00000000,
+	0xC98, 0x00121820,
+	0xC9C, 0x00007F7F,
+	0xCA0, 0x00012000,
+	0xCA4, 0x800000A0,
+	0xCA8, 0x84E6C606,
+	0xCAC, 0x00000060,
+	0xCB0, 0x00000000,
+	0xCB4, 0x00000000,
+	0xCB8, 0x00000000,
+	0xCBC, 0x28000000,
+	0xCC0, 0x0010A3D0,
+	0xCC4, 0x00000F7D,
+	0xCC8, 0x000442D6,
+	0xCCC, 0x00000000,
+	0xCD0, 0x000001C8,
+	0xCD4, 0x001C8000,
+	0xCD8, 0x00000100,
+	0xCDC, 0x40100000,
+	0xCE0, 0x00222220,
+	0xCE4, 0x20000000,
+	0xCE8, 0x37644302,
+	0xCEC, 0x2F97D40C,
+	0xD00, 0x00030740,
+	0xD04, 0x40020401,
+	0xD08, 0x0000907F,
+	0xD0C, 0x20010201,
+	0xD10, 0xA0633333,
+	0xD14, 0x3333BC53,
+	0xD18, 0x7A8F5B6F,
+	0xD2C, 0xCC979975,
+	0xD30, 0x00000000,
+	0xD34, 0x40608000,
+	0xD38, 0x88000000,
+	0xD3C, 0xC0127343,
+	0xD40, 0x00000000,
+	0xD44, 0x00000000,
+	0xD48, 0x00000000,
+	0xD4C, 0x00000000,
+	0xD50, 0x00000038,
+	0xD54, 0x00000000,
+	0xD58, 0x00000282,
+	0xD5C, 0x30032064,
+	0xD60, 0x4653DE68,
+	0xD64, 0x04518A3C,
+	0xD68, 0x00002101,
+	0xE00, 0x2D2D2D2D,
+	0xE04, 0x2D2D2D2D,
+	0xE08, 0x0390272D,
+	0xE10, 0x2D2D2D2D,
+	0xE14, 0x2D2D2D2D,
+	0xE18, 0x2D2D2D2D,
+	0xE1C, 0x2D2D2D2D,
+	0xE28, 0x00000000,
+	0xE30, 0x1000DC1F,
+	0xE34, 0x10008C1F,
+	0xE38, 0x02140102,
+	0xE3C, 0x681604C2,
+	0xE40, 0x01007C00,
+	0xE44, 0x01004800,
+	0xE48, 0xFB000000,
+	0xE4C, 0x000028D1,
+	0xE50, 0x1000DC1F,
+	0xE54, 0x10008C1F,
+	0xE58, 0x02140102,
+	0xE5C, 0x28160D05,
+	0xE60, 0x00000008,
+	0xE68, 0x001B25A4,
+	0xE6C, 0x01C00014,
+	0xE70, 0x01C00016,
+	0xE74, 0x02000014,
+	0xE78, 0x02000014,
+	0xE7C, 0x02000014,
+	0xE80, 0x02000014,
+	0xE84, 0x01C00014,
+	0xE88, 0x02000014,
+	0xE8C, 0x01C00014,
+	0xED0, 0x01C00014,
+	0xED4, 0x01C00014,
+	0xED8, 0x01C00014,
+	0xEDC, 0x00000014,
+	0xEE0, 0x00000014,
+	0xEE8, 0x21555448,
+	0xEEC, 0x03C00014,
+	0xF14, 0x00000003,
+	0xF00, 0x00100300,
+	0xF08, 0x0000800B,
+	0xF0C, 0x0000F007,
+	0xF10, 0x0000A487,
+	0xF1C, 0x80000064,
+	0xF38, 0x00030155,
+	0xF3C, 0x0000003A,
+	0xF4C, 0x13000000,
+	0xF50, 0x00000000,
+	0xF18, 0x00000000,
+};
+
+RTW_DECL_TABLE_PHY_COND(rtw8723d_bb, rtw_phy_cfg_bb);
+
+static const struct rtw_phy_pg_cfg_pair rtw8723d_bb_pg[] = {
+	{ 0, 0, 0, 0x00000e08, 0x0000ff00, 0x00003200, },
+	{ 0, 0, 0, 0x0000086c, 0xffffff00, 0x32323200, },
+	{ 0, 0, 0, 0x00000e00, 0xffffffff, 0x32343434, },
+	{ 0, 0, 0, 0x00000e04, 0xffffffff, 0x28303032, },
+	{ 0, 0, 0, 0x00000e10, 0xffffffff, 0x30323234, },
+	{ 0, 0, 0, 0x00000e14, 0xffffffff, 0x26282830, },
+};
+
+RTW_DECL_TABLE_BB_PG(rtw8723d_bb_pg);
+
+static const u32 rtw8723d_rf_a[] = {
+		0x050, 0x0001C000,
+		0x049, 0x0004AA00,
+		0x000, 0x00010000,
+		0x0B1, 0x00054573,
+		0x0B4, 0x000508AB,
+		0x0B7, 0x00014787,
+		0x0B8, 0x000064CB,
+		0x01B, 0x00073A40,
+		0x051, 0x00038CAF,
+		0x052, 0x000FCCA3,
+		0x053, 0x00090F38,
+		0x054, 0x00011083,
+		0x057, 0x000D0000,
+		0x08D, 0x00000A1A,
+		0x082, 0x00082AAC,
+		0x08E, 0x00076940,
+		0x08F, 0x00088400,
+		0x061, 0x00038CAF,
+		0x062, 0x000FCCA3,
+		0x063, 0x00090F38,
+		0x064, 0x00011083,
+		0x067, 0x000D0000,
+		0x092, 0x00082AAC,
+		0x0EF, 0x00000400,
+		0x030, 0x000008CA,
+		0x030, 0x000018CA,
+		0x030, 0x000028CA,
+		0x030, 0x000038CA,
+		0x0EF, 0x00000000,
+		0x0EE, 0x00000400,
+		0x030, 0x000008CA,
+		0x030, 0x000018CA,
+		0x030, 0x000028CA,
+		0x030, 0x000038CA,
+		0x0EE, 0x00000000,
+		0x0EF, 0x00000100,
+		0x033, 0x00000000,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000001,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000002,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000003,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000004,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000005,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000006,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000007,
+		0x03F, 0x0000CCA3,
+		0x0EF, 0x00000000,
+		0x0EE, 0x00000100,
+		0x033, 0x00000000,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000001,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000002,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000003,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000004,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000005,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000006,
+		0x03F, 0x0000CCA3,
+		0x033, 0x00000007,
+		0x03F, 0x0000CCA3,
+		0x0EE, 0x00000000,
+		0x0EF, 0x00000800,
+		0x030, 0x0000002D,
+		0x030, 0x0000122C,
+		0x030, 0x0000222F,
+		0x030, 0x0000326C,
+		0x030, 0x0000466B,
+		0x030, 0x0000566E,
+		0x030, 0x000066EB,
+		0x030, 0x000077EC,
+		0x030, 0x000087EF,
+		0x030, 0x000097F2,
+		0x030, 0x0000A7F5,
+		0x0EF, 0x00000000,
+		0x0EE, 0x00000800,
+		0x030, 0x00000001,
+		0x030, 0x00001011,
+		0x030, 0x00002011,
+		0x030, 0x00003013,
+		0x030, 0x00004033,
+		0x030, 0x00005033,
+		0x030, 0x00006037,
+		0x030, 0x0000703F,
+		0x030, 0x0000803F,
+		0x030, 0x0000903F,
+		0x030, 0x0000A03F,
+		0x0EE, 0x00000000,
+		0x082, 0x00083B8C,
+		0x0ED, 0x00000008,
+		0x030, 0x000030F6,
+		0x030, 0x00002004,
+		0x030, 0x000010F6,
+		0x030, 0x000000F6,
+		0x0ED, 0x00000000,
+		0x092, 0x00083B8C,
+		0x0EC, 0x00000008,
+		0x030, 0x000030F6,
+		0x030, 0x00002004,
+		0x030, 0x000010F6,
+		0x030, 0x000000F6,
+		0x0EC, 0x00000000,
+		0x0EF, 0x00010000,
+		0x030, 0x0001C11C,
+		0x030, 0x000181F4,
+		0x030, 0x00014108,
+		0x030, 0x000101E4,
+		0x030, 0x0000C11C,
+		0x030, 0x000081F4,
+		0x030, 0x00004108,
+		0x030, 0x000001E4,
+		0x0EF, 0x00000000,
+		0x0EE, 0x00010000,
+		0x030, 0x0001C11C,
+		0x030, 0x000181F4,
+		0x030, 0x00014108,
+		0x030, 0x000101E4,
+		0x030, 0x0000C11C,
+		0x030, 0x000081F4,
+		0x030, 0x00004108,
+		0x030, 0x000001E4,
+		0x0EE, 0x00000000,
+		0x0EF, 0x00080000,
+		0x033, 0x00000007,
+		0x03E, 0x0000005F,
+		0x03F, 0x000B3FDB,
+		0x033, 0x00000004,
+		0x03E, 0x0000005D,
+		0x03F, 0x000BFFE0,
+		0x033, 0x00000005,
+		0x03E, 0x0000005D,
+		0x03F, 0x000FBFCE,
+		0x033, 0x00000006,
+		0x03E, 0x0000005F,
+		0x03F, 0x000A7FFB,
+		0x0EF, 0x00000000,
+		0x0EE, 0x00000002,
+		0x030, 0x00000001,
+		0x030, 0x00002001,
+		0x030, 0x00004001,
+		0x030, 0x00007001,
+		0x030, 0x00006001,
+		0x030, 0x00020001,
+		0x030, 0x00022001,
+		0x030, 0x00024001,
+		0x030, 0x00027001,
+		0x030, 0x00026001,
+		0x030, 0x00034001,
+		0x030, 0x00037001,
+		0x030, 0x00036001,
+		0x030, 0x00008000,
+		0x030, 0x0000A000,
+		0x030, 0x0000C000,
+	0x83000100,	0x00000000,	0x40000000,	0x00000000,
+		0x030, 0x0000E024,
+	0xA0000000,	0x00000000,
+		0x030, 0x0000E000,
+	0xB0000000,	0x00000000,
+		0x030, 0x0001C000,
+		0x030, 0x0001E000,
+		0x0EE, 0x00000000,
+		0x0EE, 0x00020000,
+		0x0EF, 0x00020000,
+		0x030, 0x00000F75,
+		0x030, 0x00002F55,
+		0x030, 0x00003F75,
+		0x0EE, 0x00000000,
+		0x0EF, 0x00000000,
+		0x018, 0x00008401,
+		0xFFE, 0x00000000,
+};
+
+RTW_DECL_TABLE_RF_RADIO(rtw8723d_rf_a, A);
+
+static const struct rtw_txpwr_lmt_cfg_pair rtw8723d_txpwr_lmt[] = {
+	{0, 0, 0, 0, 1, 30, },
+	{2, 0, 0, 0, 1, 30, },
+	{1, 0, 0, 0, 1, 30, },
+	{0, 0, 0, 0, 2, 30, },
+	{2, 0, 0, 0, 2, 30, },
+	{1, 0, 0, 0, 2, 30, },
+	{0, 0, 0, 0, 3, 30, },
+	{2, 0, 0, 0, 3, 30, },
+	{1, 0, 0, 0, 3, 30, },
+	{0, 0, 0, 0, 4, 30, },
+	{2, 0, 0, 0, 4, 30, },
+	{1, 0, 0, 0, 4, 30, },
+	{0, 0, 0, 0, 5, 30, },
+	{2, 0, 0, 0, 5, 30, },
+	{1, 0, 0, 0, 5, 30, },
+	{0, 0, 0, 0, 6, 30, },
+	{2, 0, 0, 0, 6, 30, },
+	{1, 0, 0, 0, 6, 30, },
+	{0, 0, 0, 0, 7, 30, },
+	{2, 0, 0, 0, 7, 30, },
+	{1, 0, 0, 0, 7, 30, },
+	{0, 0, 0, 0, 8, 30, },
+	{2, 0, 0, 0, 8, 30, },
+	{1, 0, 0, 0, 8, 30, },
+	{0, 0, 0, 0, 9, 30, },
+	{2, 0, 0, 0, 9, 30, },
+	{1, 0, 0, 0, 9, 30, },
+	{0, 0, 0, 0, 10, 30, },
+	{2, 0, 0, 0, 10, 30, },
+	{1, 0, 0, 0, 10, 30, },
+	{0, 0, 0, 0, 11, 30, },
+	{2, 0, 0, 0, 11, 30, },
+	{1, 0, 0, 0, 11, 30, },
+	{0, 0, 0, 0, 12, 30, },
+	{2, 0, 0, 0, 12, 30, },
+	{1, 0, 0, 0, 12, 30, },
+	{0, 0, 0, 0, 13, 17, },
+	{2, 0, 0, 0, 13, 30, },
+	{1, 0, 0, 0, 13, 30, },
+	{0, 0, 0, 0, 14, 63, },
+	{2, 0, 0, 0, 14, 63, },
+	{1, 0, 0, 0, 14, 30, },
+	{0, 0, 0, 1, 1, 26, },
+	{2, 0, 0, 1, 1, 31, },
+	{1, 0, 0, 1, 1, 31, },
+	{0, 0, 0, 1, 2, 28, },
+	{2, 0, 0, 1, 2, 31, },
+	{1, 0, 0, 1, 2, 31, },
+	{0, 0, 0, 1, 3, 30, },
+	{2, 0, 0, 1, 3, 31, },
+	{1, 0, 0, 1, 3, 31, },
+	{0, 0, 0, 1, 4, 30, },
+	{2, 0, 0, 1, 4, 31, },
+	{1, 0, 0, 1, 4, 31, },
+	{0, 0, 0, 1, 5, 30, },
+	{2, 0, 0, 1, 5, 31, },
+	{1, 0, 0, 1, 5, 31, },
+	{0, 0, 0, 1, 6, 30, },
+	{2, 0, 0, 1, 6, 31, },
+	{1, 0, 0, 1, 6, 31, },
+	{0, 0, 0, 1, 7, 30, },
+	{2, 0, 0, 1, 7, 31, },
+	{1, 0, 0, 1, 7, 31, },
+	{0, 0, 0, 1, 8, 30, },
+	{2, 0, 0, 1, 8, 31, },
+	{1, 0, 0, 1, 8, 31, },
+	{0, 0, 0, 1, 9, 30, },
+	{2, 0, 0, 1, 9, 31, },
+	{1, 0, 0, 1, 9, 31, },
+	{0, 0, 0, 1, 10, 28, },
+	{2, 0, 0, 1, 10, 31, },
+	{1, 0, 0, 1, 10, 31, },
+	{0, 0, 0, 1, 11, 26, },
+	{2, 0, 0, 1, 11, 31, },
+	{1, 0, 0, 1, 11, 31, },
+	{0, 0, 0, 1, 12, 24, },
+	{2, 0, 0, 1, 12, 31, },
+	{1, 0, 0, 1, 12, 31, },
+	{0, 0, 0, 1, 13, 14, },
+	{2, 0, 0, 1, 13, 31, },
+	{1, 0, 0, 1, 13, 31, },
+	{0, 0, 0, 1, 14, 63, },
+	{2, 0, 0, 1, 14, 63, },
+	{1, 0, 0, 1, 14, 63, },
+	{0, 0, 0, 2, 1, 24, },
+	{2, 0, 0, 2, 1, 31, },
+	{1, 0, 0, 2, 1, 31, },
+	{0, 0, 0, 2, 2, 26, },
+	{2, 0, 0, 2, 2, 31, },
+	{1, 0, 0, 2, 2, 31, },
+	{0, 0, 0, 2, 3, 30, },
+	{2, 0, 0, 2, 3, 31, },
+	{1, 0, 0, 2, 3, 31, },
+	{0, 0, 0, 2, 4, 30, },
+	{2, 0, 0, 2, 4, 31, },
+	{1, 0, 0, 2, 4, 31, },
+	{0, 0, 0, 2, 5, 30, },
+	{2, 0, 0, 2, 5, 31, },
+	{1, 0, 0, 2, 5, 31, },
+	{0, 0, 0, 2, 6, 30, },
+	{2, 0, 0, 2, 6, 31, },
+	{1, 0, 0, 2, 6, 31, },
+	{0, 0, 0, 2, 7, 30, },
+	{2, 0, 0, 2, 7, 31, },
+	{1, 0, 0, 2, 7, 31, },
+	{0, 0, 0, 2, 8, 30, },
+	{2, 0, 0, 2, 8, 31, },
+	{1, 0, 0, 2, 8, 31, },
+	{0, 0, 0, 2, 9, 30, },
+	{2, 0, 0, 2, 9, 31, },
+	{1, 0, 0, 2, 9, 31, },
+	{0, 0, 0, 2, 10, 26, },
+	{2, 0, 0, 2, 10, 31, },
+	{1, 0, 0, 2, 10, 31, },
+	{0, 0, 0, 2, 11, 24, },
+	{2, 0, 0, 2, 11, 31, },
+	{1, 0, 0, 2, 11, 31, },
+	{0, 0, 0, 2, 12, 23, },
+	{2, 0, 0, 2, 12, 31, },
+	{1, 0, 0, 2, 12, 31, },
+	{0, 0, 0, 2, 13, 13, },
+	{2, 0, 0, 2, 13, 31, },
+	{1, 0, 0, 2, 13, 31, },
+	{0, 0, 0, 2, 14, 63, },
+	{2, 0, 0, 2, 14, 63, },
+	{1, 0, 0, 2, 14, 63, },
+	{0, 0, 0, 3, 1, 28, },
+	{2, 0, 0, 3, 1, 30, },
+	{1, 0, 0, 3, 1, 30, },
+	{0, 0, 0, 3, 2, 28, },
+	{2, 0, 0, 3, 2, 30, },
+	{1, 0, 0, 3, 2, 30, },
+	{0, 0, 0, 3, 3, 30, },
+	{2, 0, 0, 3, 3, 30, },
+	{1, 0, 0, 3, 3, 30, },
+	{0, 0, 0, 3, 4, 30, },
+	{2, 0, 0, 3, 4, 30, },
+	{1, 0, 0, 3, 4, 30, },
+	{0, 0, 0, 3, 5, 30, },
+	{2, 0, 0, 3, 5, 30, },
+	{1, 0, 0, 3, 5, 30, },
+	{0, 0, 0, 3, 6, 30, },
+	{2, 0, 0, 3, 6, 30, },
+	{1, 0, 0, 3, 6, 30, },
+	{0, 0, 0, 3, 7, 30, },
+	{2, 0, 0, 3, 7, 30, },
+	{1, 0, 0, 3, 7, 30, },
+	{0, 0, 0, 3, 8, 30, },
+	{2, 0, 0, 3, 8, 30, },
+	{1, 0, 0, 3, 8, 30, },
+	{0, 0, 0, 3, 9, 28, },
+	{2, 0, 0, 3, 9, 30, },
+	{1, 0, 0, 3, 9, 30, },
+	{0, 0, 0, 3, 10, 28, },
+	{2, 0, 0, 3, 10, 30, },
+	{1, 0, 0, 3, 10, 30, },
+	{0, 0, 0, 3, 11, 28, },
+	{2, 0, 0, 3, 11, 30, },
+	{1, 0, 0, 3, 11, 30, },
+	{0, 0, 0, 3, 12, 63, },
+	{2, 0, 0, 3, 12, 30, },
+	{1, 0, 0, 3, 12, 30, },
+	{0, 0, 0, 3, 13, 63, },
+	{2, 0, 0, 3, 13, 30, },
+	{1, 0, 0, 3, 13, 30, },
+	{0, 0, 0, 3, 14, 63, },
+	{2, 0, 0, 3, 14, 63, },
+	{1, 0, 0, 3, 14, 63, },
+	{0, 0, 1, 2, 1, 63, },
+	{2, 0, 1, 2, 1, 63, },
+	{1, 0, 1, 2, 1, 63, },
+	{0, 0, 1, 2, 2, 63, },
+	{2, 0, 1, 2, 2, 63, },
+	{1, 0, 1, 2, 2, 63, },
+	{0, 0, 1, 2, 3, 24, },
+	{2, 0, 1, 2, 3, 30, },
+	{1, 0, 1, 2, 3, 30, },
+	{0, 0, 1, 2, 4, 24, },
+	{2, 0, 1, 2, 4, 30, },
+	{1, 0, 1, 2, 4, 30, },
+	{0, 0, 1, 2, 5, 24, },
+	{2, 0, 1, 2, 5, 30, },
+	{1, 0, 1, 2, 5, 30, },
+	{0, 0, 1, 2, 6, 24, },
+	{2, 0, 1, 2, 6, 30, },
+	{1, 0, 1, 2, 6, 30, },
+	{0, 0, 1, 2, 7, 24, },
+	{2, 0, 1, 2, 7, 30, },
+	{1, 0, 1, 2, 7, 30, },
+	{0, 0, 1, 2, 8, 24, },
+	{2, 0, 1, 2, 8, 30, },
+	{1, 0, 1, 2, 8, 30, },
+	{0, 0, 1, 2, 9, 24, },
+	{2, 0, 1, 2, 9, 30, },
+	{1, 0, 1, 2, 9, 30, },
+	{0, 0, 1, 2, 10, 22, },
+	{2, 0, 1, 2, 10, 30, },
+	{1, 0, 1, 2, 10, 30, },
+	{0, 0, 1, 2, 11, 20, },
+	{2, 0, 1, 2, 11, 30, },
+	{1, 0, 1, 2, 11, 30, },
+	{0, 0, 1, 2, 12, 63, },
+	{2, 0, 1, 2, 12, 30, },
+	{1, 0, 1, 2, 12, 30, },
+	{0, 0, 1, 2, 13, 63, },
+	{2, 0, 1, 2, 13, 30, },
+	{1, 0, 1, 2, 13, 30, },
+	{0, 0, 1, 2, 14, 63, },
+	{2, 0, 1, 2, 14, 63, },
+	{1, 0, 1, 2, 14, 63, },
+	{0, 0, 1, 3, 1, 63, },
+	{2, 0, 1, 3, 1, 63, },
+	{1, 0, 1, 3, 1, 63, },
+	{0, 0, 1, 3, 2, 63, },
+	{2, 0, 1, 3, 2, 63, },
+	{1, 0, 1, 3, 2, 63, },
+	{0, 0, 1, 3, 3, 26, },
+	{2, 0, 1, 3, 3, 26, },
+	{1, 0, 1, 3, 3, 26, },
+	{0, 0, 1, 3, 4, 26, },
+	{2, 0, 1, 3, 4, 26, },
+	{1, 0, 1, 3, 4, 26, },
+	{0, 0, 1, 3, 5, 26, },
+	{2, 0, 1, 3, 5, 26, },
+	{1, 0, 1, 3, 5, 26, },
+	{0, 0, 1, 3, 6, 26, },
+	{2, 0, 1, 3, 6, 26, },
+	{1, 0, 1, 3, 6, 26, },
+	{0, 0, 1, 3, 7, 26, },
+	{2, 0, 1, 3, 7, 26, },
+	{1, 0, 1, 3, 7, 26, },
+	{0, 0, 1, 3, 8, 26, },
+	{2, 0, 1, 3, 8, 26, },
+	{1, 0, 1, 3, 8, 26, },
+	{0, 0, 1, 3, 9, 26, },
+	{2, 0, 1, 3, 9, 26, },
+	{1, 0, 1, 3, 9, 26, },
+	{0, 0, 1, 3, 10, 26, },
+	{2, 0, 1, 3, 10, 26, },
+	{1, 0, 1, 3, 10, 26, },
+	{0, 0, 1, 3, 11, 26, },
+	{2, 0, 1, 3, 11, 26, },
+	{1, 0, 1, 3, 11, 26, },
+	{0, 0, 1, 3, 12, 63, },
+	{2, 0, 1, 3, 12, 26, },
+	{1, 0, 1, 3, 12, 26, },
+	{0, 0, 1, 3, 13, 63, },
+	{2, 0, 1, 3, 13, 26, },
+	{1, 0, 1, 3, 13, 26, },
+	{0, 0, 1, 3, 14, 63, },
+	{2, 0, 1, 3, 14, 63, },
+	{1, 0, 1, 3, 14, 63, },
+};
+
+RTW_DECL_TABLE_TXPWR_LMT(rtw8723d_txpwr_lmt);
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723d_table.h b/drivers/net/wireless/realtek/rtw88/rtw8723d_table.h
new file mode 100644
index 000000000000..4db996a1d982
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/rtw8723d_table.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/* Copyright(c) 2018-2019  Realtek Corporation
+ */
+
+#ifndef __RTW8723D_TABLE_H__
+#define __RTW8723D_TABLE_H__
+
+extern const struct rtw_table rtw8723d_mac_tbl;
+extern const struct rtw_table rtw8723d_agc_tbl;
+extern const struct rtw_table rtw8723d_bb_tbl;
+extern const struct rtw_table rtw8723d_bb_pg_tbl;
+extern const struct rtw_table rtw8723d_rf_a_tbl;
+extern const struct rtw_table rtw8723d_txpwr_lmt_tbl;
+
+#endif
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
index 4dd7d4143b04..ffee8111d145 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
@@ -998,8 +998,9 @@ static bool rtw8822b_check_rf_path(u8 antenna)
 	}
 }
 
-static void rtw8822b_set_antenna(struct rtw_dev *rtwdev, u8 antenna_tx,
-				 u8 antenna_rx)
+static int rtw8822b_set_antenna(struct rtw_dev *rtwdev,
+				u32 antenna_tx,
+				u32 antenna_rx)
 {
 	struct rtw_hal *hal = &rtwdev->hal;
 
@@ -1007,16 +1008,21 @@ static void rtw8822b_set_antenna(struct rtw_dev *rtwdev, u8 antenna_tx,
 		antenna_tx, antenna_rx);
 
 	if (!rtw8822b_check_rf_path(antenna_tx)) {
-		rtw_info(rtwdev, "unsupport tx path, set to default path ab\n");
-		antenna_tx = BB_PATH_AB;
+		rtw_info(rtwdev, "unsupport tx path 0x%x\n", antenna_tx);
+		return -EINVAL;
 	}
+
 	if (!rtw8822b_check_rf_path(antenna_rx)) {
-		rtw_info(rtwdev, "unsupport rx path, set to default path ab\n");
-		antenna_rx = BB_PATH_AB;
+		rtw_info(rtwdev, "unsupport rx path 0x%x\n", antenna_rx);
+		return -EINVAL;
 	}
+
 	hal->antenna_tx = antenna_tx;
 	hal->antenna_rx = antenna_rx;
+
 	rtw8822b_config_trx_mode(rtwdev, antenna_tx, antenna_rx, false);
+
+	return 0;
 }
 
 static void rtw8822b_cfg_ldo25(struct rtw_dev *rtwdev, bool enable)
@@ -1024,7 +1030,7 @@ static void rtw8822b_cfg_ldo25(struct rtw_dev *rtwdev, bool enable)
 	u8 ldo_pwr;
 
 	ldo_pwr = rtw_read8(rtwdev, REG_LDO_EFUSE_CTRL + 3);
-	ldo_pwr = enable ? ldo_pwr | BIT(7) : ldo_pwr & ~BIT(7);
+	ldo_pwr = enable ? ldo_pwr | BIT_LDO25_EN : ldo_pwr & ~BIT_LDO25_EN;
 	rtw_write8(rtwdev, REG_LDO_EFUSE_CTRL + 3, ldo_pwr);
 }
 
@@ -2402,6 +2408,7 @@ struct rtw_chip_info rtw8822b_hw_spec = {
 	.ops = &rtw8822b_ops,
 	.id = RTW_CHIP_TYPE_8822B,
 	.fw_name = "rtw88/rtw8822b_fw.bin",
+	.wlan_cpu = RTW_WCPU_11AC,
 	.tx_pkt_desc_sz = 48,
 	.tx_buf_desc_sz = 16,
 	.rx_pkt_desc_sz = 24,
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index dc07e6be38e8..8dd92136145d 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -15,6 +15,7 @@
 #include "debug.h"
 #include "util.h"
 #include "bf.h"
+#include "efuse.h"
 
 static void rtw8822c_config_trx_mode(struct rtw_dev *rtwdev, u8 tx_path,
 				     u8 rx_path, bool is_tx2_path);
@@ -1000,10 +1001,122 @@ static void rtw8822c_rf_x2_check(struct rtw_dev *rtwdev)
 	}
 }
 
+static void rtw8822c_set_power_trim(struct rtw_dev *rtwdev, s8 bb_gain[2][8])
+{
+#define RF_SET_POWER_TRIM(_path, _seq, _idx)					\
+		do {								\
+			rtw_write_rf(rtwdev, _path, 0x33, RFREG_MASK, _seq);	\
+			rtw_write_rf(rtwdev, _path, 0x3f, RFREG_MASK,		\
+				     bb_gain[_path][_idx]);			\
+		} while (0)
+	u8 path;
+
+	for (path = 0; path < rtwdev->hal.rf_path_num; path++) {
+		rtw_write_rf(rtwdev, path, 0xee, BIT(19), 1);
+		RF_SET_POWER_TRIM(path, 0x0, 0);
+		RF_SET_POWER_TRIM(path, 0x1, 1);
+		RF_SET_POWER_TRIM(path, 0x2, 2);
+		RF_SET_POWER_TRIM(path, 0x3, 2);
+		RF_SET_POWER_TRIM(path, 0x4, 3);
+		RF_SET_POWER_TRIM(path, 0x5, 4);
+		RF_SET_POWER_TRIM(path, 0x6, 5);
+		RF_SET_POWER_TRIM(path, 0x7, 6);
+		RF_SET_POWER_TRIM(path, 0x8, 7);
+		RF_SET_POWER_TRIM(path, 0x9, 3);
+		RF_SET_POWER_TRIM(path, 0xa, 4);
+		RF_SET_POWER_TRIM(path, 0xb, 5);
+		RF_SET_POWER_TRIM(path, 0xc, 6);
+		RF_SET_POWER_TRIM(path, 0xd, 7);
+		RF_SET_POWER_TRIM(path, 0xe, 7);
+		rtw_write_rf(rtwdev, path, 0xee, BIT(19), 0);
+	}
+#undef RF_SET_POWER_TRIM
+}
+
+static void rtw8822c_power_trim(struct rtw_dev *rtwdev)
+{
+	u8 pg_pwr = 0xff, i, path, idx;
+	s8 bb_gain[2][8] = {0};
+	u16 rf_efuse_2g[3] = {PPG_2GL_TXAB, PPG_2GM_TXAB, PPG_2GH_TXAB};
+	u16 rf_efuse_5g[2][5] = {{PPG_5GL1_TXA, PPG_5GL2_TXA, PPG_5GM1_TXA,
+				  PPG_5GM2_TXA, PPG_5GH1_TXA},
+				 {PPG_5GL1_TXB, PPG_5GL2_TXB, PPG_5GM1_TXB,
+				  PPG_5GM2_TXB, PPG_5GH1_TXB} };
+	bool set = false;
+
+	for (i = 0; i < ARRAY_SIZE(rf_efuse_2g); i++) {
+		rtw_read8_physical_efuse(rtwdev, rf_efuse_2g[i], &pg_pwr);
+		if (pg_pwr == EFUSE_READ_FAIL)
+			continue;
+		set = true;
+		bb_gain[RF_PATH_A][i] = FIELD_GET(PPG_2G_A_MASK, pg_pwr);
+		bb_gain[RF_PATH_B][i] = FIELD_GET(PPG_2G_B_MASK, pg_pwr);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(rf_efuse_5g[0]); i++) {
+		for (path = 0; path < rtwdev->hal.rf_path_num; path++) {
+			rtw_read8_physical_efuse(rtwdev, rf_efuse_5g[path][i],
+						 &pg_pwr);
+			if (pg_pwr == EFUSE_READ_FAIL)
+				continue;
+			set = true;
+			idx = i + ARRAY_SIZE(rf_efuse_2g);
+			bb_gain[path][idx] = FIELD_GET(PPG_5G_MASK, pg_pwr);
+		}
+	}
+	if (set)
+		rtw8822c_set_power_trim(rtwdev, bb_gain);
+
+	rtw_write32_mask(rtwdev, REG_DIS_DPD, DIS_DPD_MASK, DIS_DPD_RATEALL);
+}
+
+static void rtw8822c_thermal_trim(struct rtw_dev *rtwdev)
+{
+	u16 rf_efuse[2] = {PPG_THERMAL_A, PPG_THERMAL_B};
+	u8 pg_therm = 0xff, thermal[2] = {0}, path;
+
+	for (path = 0; path < rtwdev->hal.rf_path_num; path++) {
+		rtw_read8_physical_efuse(rtwdev, rf_efuse[path], &pg_therm);
+		if (pg_therm == EFUSE_READ_FAIL)
+			return;
+		/* Efuse value of BIT(0) shall be move to BIT(3), and the value
+		 * of BIT(1) to BIT(3) should be right shifted 1 bit.
+		 */
+		thermal[path] = FIELD_GET(GENMASK(3, 1), pg_therm);
+		thermal[path] |= FIELD_PREP(BIT(3), pg_therm & BIT(0));
+		rtw_write_rf(rtwdev, path, 0x43, RF_THEMAL_MASK, thermal[path]);
+	}
+}
+
+static void rtw8822c_pa_bias(struct rtw_dev *rtwdev)
+{
+	u16 rf_efuse_2g[2] = {PPG_PABIAS_2GA, PPG_PABIAS_2GB};
+	u16 rf_efuse_5g[2] = {PPG_PABIAS_5GA, PPG_PABIAS_5GB};
+	u8 pg_pa_bias = 0xff, path;
+
+	for (path = 0; path < rtwdev->hal.rf_path_num; path++) {
+		rtw_read8_physical_efuse(rtwdev, rf_efuse_2g[path],
+					 &pg_pa_bias);
+		if (pg_pa_bias == EFUSE_READ_FAIL)
+			return;
+		pg_pa_bias = FIELD_GET(PPG_PABIAS_MASK, pg_pa_bias);
+		rtw_write_rf(rtwdev, path, 0x60, RF_PABIAS_2G_MASK, pg_pa_bias);
+	}
+	for (path = 0; path < rtwdev->hal.rf_path_num; path++) {
+		rtw_read8_physical_efuse(rtwdev, rf_efuse_5g[path],
+					 &pg_pa_bias);
+		pg_pa_bias = FIELD_GET(PPG_PABIAS_MASK, pg_pa_bias);
+		rtw_write_rf(rtwdev, path, 0x60, RF_PABIAS_5G_MASK, pg_pa_bias);
+	}
+}
+
 static void rtw8822c_rf_init(struct rtw_dev *rtwdev)
 {
 	rtw8822c_rf_dac_cal(rtwdev);
 	rtw8822c_rf_x2_check(rtwdev);
+	rtw8822c_thermal_trim(rtwdev);
+	rtw8822c_power_trim(rtwdev);
+	rtw8822c_pa_bias(rtwdev);
 }
 
 static void rtw8822c_pwrtrack_init(struct rtw_dev *rtwdev)
@@ -1890,6 +2003,40 @@ static void rtw8822c_set_tx_power_index(struct rtw_dev *rtwdev)
 	}
 }
 
+static int rtw8822c_set_antenna(struct rtw_dev *rtwdev,
+				u32 antenna_tx,
+				u32 antenna_rx)
+{
+	struct rtw_hal *hal = &rtwdev->hal;
+
+	switch (antenna_tx) {
+	case BB_PATH_A:
+	case BB_PATH_B:
+	case BB_PATH_AB:
+		break;
+	default:
+		rtw_info(rtwdev, "unsupport tx path 0x%x\n", antenna_tx);
+		return -EINVAL;
+	}
+
+	/* path B only is not available for RX */
+	switch (antenna_rx) {
+	case BB_PATH_A:
+	case BB_PATH_AB:
+		break;
+	default:
+		rtw_info(rtwdev, "unsupport rx path 0x%x\n", antenna_rx);
+		return -EINVAL;
+	}
+
+	hal->antenna_tx = antenna_tx;
+	hal->antenna_rx = antenna_rx;
+
+	rtw8822c_config_trx_mode(rtwdev, antenna_tx, antenna_rx, false);
+
+	return 0;
+}
+
 static void rtw8822c_cfg_ldo25(struct rtw_dev *rtwdev, bool enable)
 {
 	u8 ldo_pwr;
@@ -3794,6 +3941,7 @@ static struct rtw_chip_ops rtw8822c_ops = {
 	.read_rf		= rtw_phy_read_rf,
 	.write_rf		= rtw_phy_write_rf_reg_mix,
 	.set_tx_power_index	= rtw8822c_set_tx_power_index,
+	.set_antenna		= rtw8822c_set_antenna,
 	.cfg_ldo25		= rtw8822c_cfg_ldo25,
 	.false_alarm_statistics	= rtw8822c_false_alarm_statistics,
 	.dpk_track		= rtw8822c_dpk_track,
@@ -4121,6 +4269,7 @@ struct rtw_chip_info rtw8822c_hw_spec = {
 	.ops = &rtw8822c_ops,
 	.id = RTW_CHIP_TYPE_8822C,
 	.fw_name = "rtw88/rtw8822c_fw.bin",
+	.wlan_cpu = RTW_WCPU_11AC,
 	.tx_pkt_desc_sz = 48,
 	.tx_buf_desc_sz = 16,
 	.rx_pkt_desc_sz = 24,
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.h b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
index dfd8662a0c0e..32b4771e04d0 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
@@ -309,4 +309,32 @@ const struct rtw_table name ## _tbl = {			\
 #define BIT_GS_PWSF		GENMASK(27, 0)
 #define BIT_RPT_DGAIN		GENMASK(27, 16)
 #define BIT_TX_CFIR		GENMASK(31, 30)
+
+#define PPG_THERMAL_A 0x1ef
+#define PPG_THERMAL_B 0x1b0
+#define RF_THEMAL_MASK GENMASK(19, 16)
+#define PPG_2GL_TXAB 0x1d4
+#define PPG_2GM_TXAB 0x1ee
+#define PPG_2GH_TXAB 0x1d2
+#define PPG_2G_A_MASK GENMASK(3, 0)
+#define PPG_2G_B_MASK GENMASK(7, 4)
+#define PPG_5GL1_TXA 0x1ec
+#define PPG_5GL2_TXA 0x1e8
+#define PPG_5GM1_TXA 0x1e4
+#define PPG_5GM2_TXA 0x1e0
+#define PPG_5GH1_TXA 0x1dc
+#define PPG_5GL1_TXB 0x1eb
+#define PPG_5GL2_TXB 0x1e7
+#define PPG_5GM1_TXB 0x1e3
+#define PPG_5GM2_TXB 0x1df
+#define PPG_5GH1_TXB 0x1db
+#define PPG_5G_MASK GENMASK(4, 0)
+#define PPG_PABIAS_2GA 0x1d6
+#define PPG_PABIAS_2GB 0x1d5
+#define PPG_PABIAS_5GA 0x1d8
+#define PPG_PABIAS_5GB 0x1d7
+#define PPG_PABIAS_MASK GENMASK(3, 0)
+#define RF_PABIAS_2G_MASK GENMASK(15, 12)
+#define RF_PABIAS_5G_MASK GENMASK(19, 16)
+
 #endif
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index c8f8fe5497a8..52375f3e430a 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -201,7 +201,7 @@ struct ndis_80211_pmkid_candidate {
 struct ndis_80211_pmkid_cand_list {
 	__le32 version;
 	__le32 num_candidates;
-	struct ndis_80211_pmkid_candidate candidate_list[0];
+	struct ndis_80211_pmkid_candidate candidate_list[];
 } __packed;
 
 struct ndis_80211_status_indication {
@@ -246,12 +246,12 @@ struct ndis_80211_bssid_ex {
 	__le32 net_infra;
 	u8 rates[NDIS_802_11_LENGTH_RATES_EX];
 	__le32 ie_length;
-	u8 ies[0];
+	u8 ies[];
 } __packed;
 
 struct ndis_80211_bssid_list_ex {
 	__le32 num_items;
-	struct ndis_80211_bssid_ex bssid[0];
+	struct ndis_80211_bssid_ex bssid[];
 } __packed;
 
 struct ndis_80211_fixed_ies {
@@ -333,7 +333,7 @@ struct ndis_80211_bssid_info {
 struct ndis_80211_pmkid {
 	__le32 length;
 	__le32 bssid_info_count;
-	struct ndis_80211_bssid_info bssid_info[0];
+	struct ndis_80211_bssid_info bssid_info[];
 } __packed;
 
 /*
diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
index 440088293aff..5c0adb0efc5d 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -832,7 +832,7 @@ static void rsi_mac80211_bss_info_changed(struct ieee80211_hw *hw,
 		common->cqm_info.last_cqm_event_rssi = 0;
 		common->cqm_info.rssi_thold = bss_conf->cqm_rssi_thold;
 		common->cqm_info.rssi_hyst = bss_conf->cqm_rssi_hyst;
-		rsi_dbg(INFO_ZONE, "RSSI throld & hysteresis are: %d %d\n",
+		rsi_dbg(INFO_ZONE, "RSSI threshold & hysteresis are: %d %d\n",
 			common->cqm_info.rssi_thold,
 			common->cqm_info.rssi_hyst);
 	}
diff --git a/drivers/net/wireless/st/cw1200/cw1200_spi.c b/drivers/net/wireless/st/cw1200/cw1200_spi.c
index ef01caac629c..271ed2ce2d7f 100644
--- a/drivers/net/wireless/st/cw1200/cw1200_spi.c
+++ b/drivers/net/wireless/st/cw1200/cw1200_spi.c
@@ -268,15 +268,11 @@ static int cw1200_spi_irq_subscribe(struct hwbus_priv *self)
 	return ret;
 }
 
-static int cw1200_spi_irq_unsubscribe(struct hwbus_priv *self)
+static void cw1200_spi_irq_unsubscribe(struct hwbus_priv *self)
 {
-	int ret = 0;
-
 	pr_debug("SW IRQ unsubscribe\n");
 	disable_irq_wake(self->func->irq);
 	free_irq(self->func->irq, self);
-
-	return ret;
 }
 
 static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h
index f2609d5b6bf7..9acd8a41ea61 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -458,6 +458,7 @@ enum wl1271_cmd_key_type {
 	KEY_TKIP = 2,
 	KEY_AES  = 3,
 	KEY_GEM  = 4,
+	KEY_IGTK  = 5,
 };
 
 struct wl1271_cmd_set_keys {
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index f140f7d7f553..4421fc656b1c 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3547,6 +3547,9 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
 	case WL1271_CIPHER_SUITE_GEM:
 		key_type = KEY_GEM;
 		break;
+	case WLAN_CIPHER_SUITE_AES_CMAC:
+		key_type = KEY_IGTK;
+		break;
 	default:
 		wl1271_error("Unknown key algo 0x%x", key_conf->cipher);
 
@@ -6214,6 +6217,7 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 		WLAN_CIPHER_SUITE_TKIP,
 		WLAN_CIPHER_SUITE_CCMP,
 		WL1271_CIPHER_SUITE_GEM,
+		WLAN_CIPHER_SUITE_AES_CMAC,
 	};
 
 	/* The tx descriptor buffer */
diff --git a/drivers/ntb/core.c b/drivers/ntb/core.c
index 2581ab724c34..f8f75a504a58 100644
--- a/drivers/ntb/core.c
+++ b/drivers/ntb/core.c
@@ -214,10 +214,8 @@ int ntb_default_port_number(struct ntb_dev *ntb)
 	case NTB_TOPO_B2B_DSD:
 		return NTB_PORT_SEC_DSD;
 	default:
-		break;
+		return 0;
 	}
-
-	return -EINVAL;
 }
 EXPORT_SYMBOL(ntb_default_port_number);
 
@@ -240,10 +238,8 @@ int ntb_default_peer_port_number(struct ntb_dev *ntb, int pidx)
 	case NTB_TOPO_B2B_DSD:
 		return NTB_PORT_PRI_USD;
 	default:
-		break;
+		return 0;
 	}
-
-	return -EINVAL;
 }
 EXPORT_SYMBOL(ntb_default_peer_port_number);
 
@@ -315,4 +311,3 @@ static void __exit ntb_driver_exit(void)
 	bus_unregister(&ntb_bus);
 }
 module_exit(ntb_driver_exit);
-
diff --git a/drivers/ntb/hw/amd/ntb_hw_amd.c b/drivers/ntb/hw/amd/ntb_hw_amd.c
index 9e310e1ad4d0..88e1db65be02 100644
--- a/drivers/ntb/hw/amd/ntb_hw_amd.c
+++ b/drivers/ntb/hw/amd/ntb_hw_amd.c
@@ -1191,10 +1191,6 @@ static int amd_ntb_init_pci(struct amd_ntb_dev *ndev,
 			goto err_dma_mask;
 		dev_warn(&pdev->dev, "Cannot DMA consistent highmem\n");
 	}
-	rc = dma_coerce_mask_and_coherent(&ndev->ntb.dev,
-					  dma_get_mask(&pdev->dev));
-	if (rc)
-		goto err_dma_mask;
 
 	ndev->self_mmio = pci_iomap(pdev, 0, 0);
 	if (!ndev->self_mmio) {
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
index edae52384b8a..d54261f50851 100644
--- a/drivers/ntb/hw/idt/ntb_hw_idt.c
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.c
@@ -2660,12 +2660,6 @@ static int idt_init_pci(struct idt_ntb_dev *ndev)
 		dev_warn(&pdev->dev,
 			"Cannot set consistent DMA highmem bit mask\n");
 	}
-	ret = dma_coerce_mask_and_coherent(&ndev->ntb.dev,
-					   dma_get_mask(&pdev->dev));
-	if (ret != 0) {
-		dev_err(&pdev->dev, "Failed to set NTB device DMA bit mask\n");
-		return ret;
-	}
 
 	/*
 	 * Enable the device advanced error reporting. It's not critical to
diff --git a/drivers/ntb/hw/intel/Makefile b/drivers/ntb/hw/intel/Makefile
index 60ec8a773eea..f80da0ba15b2 100644
--- a/drivers/ntb/hw/intel/Makefile
+++ b/drivers/ntb/hw/intel/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_NTB_INTEL) += ntb_hw_intel.o
-ntb_hw_intel-y := ntb_hw_gen1.o ntb_hw_gen3.o
+ntb_hw_intel-y := ntb_hw_gen1.o ntb_hw_gen3.o ntb_hw_gen4.o
diff --git a/drivers/ntb/hw/intel/ntb_hw_gen1.c b/drivers/ntb/hw/intel/ntb_hw_gen1.c
index bb57ec239029..423f9b8fbbcf 100644
--- a/drivers/ntb/hw/intel/ntb_hw_gen1.c
+++ b/drivers/ntb/hw/intel/ntb_hw_gen1.c
@@ -60,6 +60,7 @@
 #include "ntb_hw_intel.h"
 #include "ntb_hw_gen1.h"
 #include "ntb_hw_gen3.h"
+#include "ntb_hw_gen4.h"
 
 #define NTB_NAME	"ntb_hw_intel"
 #define NTB_DESC	"Intel(R) PCI-E Non-Transparent Bridge Driver"
@@ -762,6 +763,8 @@ static ssize_t ndev_debugfs_read(struct file *filp, char __user *ubuf,
 		return ndev_ntb_debugfs_read(filp, ubuf, count, offp);
 	else if (pdev_is_gen3(ndev->ntb.pdev))
 		return ndev_ntb3_debugfs_read(filp, ubuf, count, offp);
+	else if (pdev_is_gen4(ndev->ntb.pdev))
+		return ndev_ntb4_debugfs_read(filp, ubuf, count, offp);
 
 	return -ENXIO;
 }
@@ -1783,10 +1786,6 @@ static int intel_ntb_init_pci(struct intel_ntb_dev *ndev, struct pci_dev *pdev)
 			goto err_dma_mask;
 		dev_warn(&pdev->dev, "Cannot DMA consistent highmem\n");
 	}
-	rc = dma_coerce_mask_and_coherent(&ndev->ntb.dev,
-					  dma_get_mask(&pdev->dev));
-	if (rc)
-		goto err_dma_mask;
 
 	ndev->self_mmio = pci_iomap(pdev, 0, 0);
 	if (!ndev->self_mmio) {
@@ -1858,16 +1857,15 @@ static int intel_ntb_pci_probe(struct pci_dev *pdev,
 	int rc, node;
 
 	node = dev_to_node(&pdev->dev);
+	ndev = kzalloc_node(sizeof(*ndev), GFP_KERNEL, node);
+	if (!ndev) {
+		rc = -ENOMEM;
+		goto err_ndev;
+	}
 
-	if (pdev_is_gen1(pdev)) {
-		ndev = kzalloc_node(sizeof(*ndev), GFP_KERNEL, node);
-		if (!ndev) {
-			rc = -ENOMEM;
-			goto err_ndev;
-		}
-
-		ndev_init_struct(ndev, pdev);
+	ndev_init_struct(ndev, pdev);
 
+	if (pdev_is_gen1(pdev)) {
 		rc = intel_ntb_init_pci(ndev, pdev);
 		if (rc)
 			goto err_init_pci;
@@ -1875,17 +1873,8 @@ static int intel_ntb_pci_probe(struct pci_dev *pdev,
 		rc = xeon_init_dev(ndev);
 		if (rc)
 			goto err_init_dev;
-
 	} else if (pdev_is_gen3(pdev)) {
-		ndev = kzalloc_node(sizeof(*ndev), GFP_KERNEL, node);
-		if (!ndev) {
-			rc = -ENOMEM;
-			goto err_ndev;
-		}
-
-		ndev_init_struct(ndev, pdev);
 		ndev->ntb.ops = &intel_ntb3_ops;
-
 		rc = intel_ntb_init_pci(ndev, pdev);
 		if (rc)
 			goto err_init_pci;
@@ -1893,7 +1882,15 @@ static int intel_ntb_pci_probe(struct pci_dev *pdev,
 		rc = gen3_init_dev(ndev);
 		if (rc)
 			goto err_init_dev;
+	} else if (pdev_is_gen4(pdev)) {
+		ndev->ntb.ops = &intel_ntb4_ops;
+		rc = intel_ntb_init_pci(ndev, pdev);
+		if (rc)
+			goto err_init_pci;
 
+		rc = gen4_init_dev(ndev);
+		if (rc)
+			goto err_init_dev;
 	} else {
 		rc = -EINVAL;
 		goto err_ndev;
@@ -1915,7 +1912,7 @@ static int intel_ntb_pci_probe(struct pci_dev *pdev,
 
 err_register:
 	ndev_deinit_debugfs(ndev);
-	if (pdev_is_gen1(pdev) || pdev_is_gen3(pdev))
+	if (pdev_is_gen1(pdev) || pdev_is_gen3(pdev) || pdev_is_gen4(pdev))
 		xeon_deinit_dev(ndev);
 err_init_dev:
 	intel_ntb_deinit_pci(ndev);
@@ -1931,7 +1928,7 @@ static void intel_ntb_pci_remove(struct pci_dev *pdev)
 
 	ntb_unregister_device(&ndev->ntb);
 	ndev_deinit_debugfs(ndev);
-	if (pdev_is_gen1(pdev) || pdev_is_gen3(pdev))
+	if (pdev_is_gen1(pdev) || pdev_is_gen3(pdev) || pdev_is_gen4(pdev))
 		xeon_deinit_dev(ndev);
 	intel_ntb_deinit_pci(ndev);
 	kfree(ndev);
@@ -2036,6 +2033,7 @@ static const struct file_operations intel_ntb_debugfs_info = {
 };
 
 static const struct pci_device_id intel_ntb_pci_tbl[] = {
+	/* GEN1 */
 	{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_JSF)},
 	{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_SNB)},
 	{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_IVT)},
@@ -2051,7 +2049,12 @@ static const struct pci_device_id intel_ntb_pci_tbl[] = {
 	{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_SS_IVT)},
 	{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_SS_HSX)},
 	{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_SS_BDX)},
+
+	/* GEN3 */
 	{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_SKX)},
+
+	/* GEN4 */
+	{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_ICX)},
 	{0}
 };
 MODULE_DEVICE_TABLE(pci, intel_ntb_pci_tbl);
diff --git a/drivers/ntb/hw/intel/ntb_hw_gen3.c b/drivers/ntb/hw/intel/ntb_hw_gen3.c
index c3397160db7f..ffcfc3e02c35 100644
--- a/drivers/ntb/hw/intel/ntb_hw_gen3.c
+++ b/drivers/ntb/hw/intel/ntb_hw_gen3.c
@@ -415,9 +415,8 @@ ssize_t ndev_ntb3_debugfs_read(struct file *filp, char __user *ubuf,
 	return ret;
 }
 
-static int intel_ntb3_link_enable(struct ntb_dev *ntb,
-				  enum ntb_speed max_speed,
-				  enum ntb_width max_width)
+int intel_ntb3_link_enable(struct ntb_dev *ntb, enum ntb_speed max_speed,
+		enum ntb_width max_width)
 {
 	struct intel_ntb_dev *ndev;
 	u32 ntb_ctl;
@@ -532,7 +531,7 @@ static int intel_ntb3_mw_set_trans(struct ntb_dev *ntb, int pidx, int idx,
 	return 0;
 }
 
-static int intel_ntb3_peer_db_addr(struct ntb_dev *ntb, phys_addr_t *db_addr,
+int intel_ntb3_peer_db_addr(struct ntb_dev *ntb, phys_addr_t *db_addr,
 				   resource_size_t *db_size,
 				   u64 *db_data, int db_bit)
 {
@@ -563,7 +562,7 @@ static int intel_ntb3_peer_db_addr(struct ntb_dev *ntb, phys_addr_t *db_addr,
 	return 0;
 }
 
-static int intel_ntb3_peer_db_set(struct ntb_dev *ntb, u64 db_bits)
+int intel_ntb3_peer_db_set(struct ntb_dev *ntb, u64 db_bits)
 {
 	struct intel_ntb_dev *ndev = ntb_ndev(ntb);
 	int bit;
@@ -581,7 +580,7 @@ static int intel_ntb3_peer_db_set(struct ntb_dev *ntb, u64 db_bits)
 	return 0;
 }
 
-static u64 intel_ntb3_db_read(struct ntb_dev *ntb)
+u64 intel_ntb3_db_read(struct ntb_dev *ntb)
 {
 	struct intel_ntb_dev *ndev = ntb_ndev(ntb);
 
@@ -590,7 +589,7 @@ static u64 intel_ntb3_db_read(struct ntb_dev *ntb)
 			    ndev->self_reg->db_clear);
 }
 
-static int intel_ntb3_db_clear(struct ntb_dev *ntb, u64 db_bits)
+int intel_ntb3_db_clear(struct ntb_dev *ntb, u64 db_bits)
 {
 	struct intel_ntb_dev *ndev = ntb_ndev(ntb);
 
diff --git a/drivers/ntb/hw/intel/ntb_hw_gen3.h b/drivers/ntb/hw/intel/ntb_hw_gen3.h
index 75fb86ca27bb..2bc5d8356045 100644
--- a/drivers/ntb/hw/intel/ntb_hw_gen3.h
+++ b/drivers/ntb/hw/intel/ntb_hw_gen3.h
@@ -104,6 +104,14 @@ static inline void gen3_db_iowrite(u64 bits, void __iomem *mmio)
 ssize_t ndev_ntb3_debugfs_read(struct file *filp, char __user *ubuf,
 				      size_t count, loff_t *offp);
 int gen3_init_dev(struct intel_ntb_dev *ndev);
+int intel_ntb3_link_enable(struct ntb_dev *ntb, enum ntb_speed max_speed,
+		enum ntb_width max_width);
+u64 intel_ntb3_db_read(struct ntb_dev *ntb);
+int intel_ntb3_db_clear(struct ntb_dev *ntb, u64 db_bits);
+int intel_ntb3_peer_db_set(struct ntb_dev *ntb, u64 db_bits);
+int intel_ntb3_peer_db_addr(struct ntb_dev *ntb, phys_addr_t *db_addr,
+				resource_size_t *db_size,
+				u64 *db_data, int db_bit);
 
 extern const struct ntb_dev_ops intel_ntb3_ops;
 
diff --git a/drivers/ntb/hw/intel/ntb_hw_gen4.c b/drivers/ntb/hw/intel/ntb_hw_gen4.c
new file mode 100644
index 000000000000..aab614099d34
--- /dev/null
+++ b/drivers/ntb/hw/intel/ntb_hw_gen4.c
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/ntb.h>
+#include <linux/log2.h>
+
+#include "ntb_hw_intel.h"
+#include "ntb_hw_gen1.h"
+#include "ntb_hw_gen3.h"
+#include "ntb_hw_gen4.h"
+
+static int gen4_poll_link(struct intel_ntb_dev *ndev);
+static int gen4_link_is_up(struct intel_ntb_dev *ndev);
+
+static const struct intel_ntb_reg gen4_reg = {
+	.poll_link		= gen4_poll_link,
+	.link_is_up		= gen4_link_is_up,
+	.db_ioread		= gen3_db_ioread,
+	.db_iowrite		= gen3_db_iowrite,
+	.db_size		= sizeof(u32),
+	.ntb_ctl		= GEN4_NTBCNTL_OFFSET,
+	.mw_bar			= {2, 4},
+};
+
+static const struct intel_ntb_alt_reg gen4_pri_reg = {
+	.db_clear		= GEN4_IM_INT_STATUS_OFFSET,
+	.db_mask		= GEN4_IM_INT_DISABLE_OFFSET,
+	.spad			= GEN4_IM_SPAD_OFFSET,
+};
+
+static const struct intel_ntb_xlat_reg gen4_sec_xlat = {
+	.bar2_limit		= GEN4_IM23XLMT_OFFSET,
+	.bar2_xlat		= GEN4_IM23XBASE_OFFSET,
+	.bar2_idx		= GEN4_IM23XBASEIDX_OFFSET,
+};
+
+static const struct intel_ntb_alt_reg gen4_b2b_reg = {
+	.db_bell		= GEN4_IM_DOORBELL_OFFSET,
+	.spad			= GEN4_EM_SPAD_OFFSET,
+};
+
+static int gen4_poll_link(struct intel_ntb_dev *ndev)
+{
+	u16 reg_val;
+
+	/*
+	 * We need to write to DLLSCS bit in the SLOTSTS before we
+	 * can clear the hardware link interrupt on ICX NTB.
+	 */
+	iowrite16(GEN4_SLOTSTS_DLLSCS, ndev->self_mmio + GEN4_SLOTSTS);
+	ndev->reg->db_iowrite(ndev->db_link_mask,
+			      ndev->self_mmio +
+			      ndev->self_reg->db_clear);
+
+	reg_val = ioread16(ndev->self_mmio + GEN4_LINK_STATUS_OFFSET);
+	if (reg_val == ndev->lnk_sta)
+		return 0;
+
+	ndev->lnk_sta = reg_val;
+
+	return 1;
+}
+
+static int gen4_link_is_up(struct intel_ntb_dev *ndev)
+{
+	return NTB_LNK_STA_ACTIVE(ndev->lnk_sta);
+}
+
+static int gen4_init_isr(struct intel_ntb_dev *ndev)
+{
+	int i;
+
+	/*
+	 * The MSIX vectors and the interrupt status bits are not lined up
+	 * on Gen3 (Skylake) and Gen4. By default the link status bit is bit
+	 * 32, however it is by default MSIX vector0. We need to fixup to
+	 * line them up. The vectors at reset is 1-32,0. We need to reprogram
+	 * to 0-32.
+	 */
+	for (i = 0; i < GEN4_DB_MSIX_VECTOR_COUNT; i++)
+		iowrite8(i, ndev->self_mmio + GEN4_INTVEC_OFFSET + i);
+
+	return ndev_init_isr(ndev, GEN4_DB_MSIX_VECTOR_COUNT,
+			     GEN4_DB_MSIX_VECTOR_COUNT,
+			     GEN4_DB_MSIX_VECTOR_SHIFT,
+			     GEN4_DB_TOTAL_SHIFT);
+}
+
+static int gen4_setup_b2b_mw(struct intel_ntb_dev *ndev,
+			    const struct intel_b2b_addr *addr,
+			    const struct intel_b2b_addr *peer_addr)
+{
+	struct pci_dev *pdev;
+	void __iomem *mmio;
+	phys_addr_t bar_addr;
+
+	pdev = ndev->ntb.pdev;
+	mmio = ndev->self_mmio;
+
+	/* setup incoming bar limits == base addrs (zero length windows) */
+	bar_addr = addr->bar2_addr64;
+	iowrite64(bar_addr, mmio + GEN4_IM23XLMT_OFFSET);
+	bar_addr = ioread64(mmio + GEN4_IM23XLMT_OFFSET);
+	dev_dbg(&pdev->dev, "IM23XLMT %#018llx\n", bar_addr);
+
+	bar_addr = addr->bar4_addr64;
+	iowrite64(bar_addr, mmio + GEN4_IM45XLMT_OFFSET);
+	bar_addr = ioread64(mmio + GEN4_IM45XLMT_OFFSET);
+	dev_dbg(&pdev->dev, "IM45XLMT %#018llx\n", bar_addr);
+
+	/* zero incoming translation addrs */
+	iowrite64(0, mmio + GEN4_IM23XBASE_OFFSET);
+	iowrite64(0, mmio + GEN4_IM45XBASE_OFFSET);
+
+	ndev->peer_mmio = ndev->self_mmio;
+
+	return 0;
+}
+
+static int gen4_init_ntb(struct intel_ntb_dev *ndev)
+{
+	int rc;
+
+
+	ndev->mw_count = XEON_MW_COUNT;
+	ndev->spad_count = GEN4_SPAD_COUNT;
+	ndev->db_count = GEN4_DB_COUNT;
+	ndev->db_link_mask = GEN4_DB_LINK_BIT;
+
+	ndev->self_reg = &gen4_pri_reg;
+	ndev->xlat_reg = &gen4_sec_xlat;
+	ndev->peer_reg = &gen4_b2b_reg;
+
+	if (ndev->ntb.topo == NTB_TOPO_B2B_USD)
+		rc = gen4_setup_b2b_mw(ndev, &xeon_b2b_dsd_addr,
+				&xeon_b2b_usd_addr);
+	else
+		rc = gen4_setup_b2b_mw(ndev, &xeon_b2b_usd_addr,
+				&xeon_b2b_dsd_addr);
+	if (rc)
+		return rc;
+
+	ndev->db_valid_mask = BIT_ULL(ndev->db_count) - 1;
+
+	ndev->reg->db_iowrite(ndev->db_valid_mask,
+			      ndev->self_mmio +
+			      ndev->self_reg->db_mask);
+
+	return 0;
+}
+
+static enum ntb_topo gen4_ppd_topo(struct intel_ntb_dev *ndev, u32 ppd)
+{
+	switch (ppd & GEN4_PPD_TOPO_MASK) {
+	case GEN4_PPD_TOPO_B2B_USD:
+		return NTB_TOPO_B2B_USD;
+	case GEN4_PPD_TOPO_B2B_DSD:
+		return NTB_TOPO_B2B_DSD;
+	}
+
+	return NTB_TOPO_NONE;
+}
+
+int gen4_init_dev(struct intel_ntb_dev *ndev)
+{
+	struct pci_dev *pdev = ndev->ntb.pdev;
+	u32 ppd1/*, ppd0*/;
+	u16 lnkctl;
+	int rc;
+
+	ndev->reg = &gen4_reg;
+
+	ppd1 = ioread32(ndev->self_mmio + GEN4_PPD1_OFFSET);
+	ndev->ntb.topo = gen4_ppd_topo(ndev, ppd1);
+	dev_dbg(&pdev->dev, "ppd %#x topo %s\n", ppd1,
+		ntb_topo_string(ndev->ntb.topo));
+	if (ndev->ntb.topo == NTB_TOPO_NONE)
+		return -EINVAL;
+
+	rc = gen4_init_ntb(ndev);
+	if (rc)
+		return rc;
+
+	/* init link setup */
+	lnkctl = ioread16(ndev->self_mmio + GEN4_LINK_CTRL_OFFSET);
+	lnkctl |= GEN4_LINK_CTRL_LINK_DISABLE;
+	iowrite16(lnkctl, ndev->self_mmio + GEN4_LINK_CTRL_OFFSET);
+
+	return gen4_init_isr(ndev);
+}
+
+ssize_t ndev_ntb4_debugfs_read(struct file *filp, char __user *ubuf,
+				      size_t count, loff_t *offp)
+{
+	struct intel_ntb_dev *ndev;
+	void __iomem *mmio;
+	char *buf;
+	size_t buf_size;
+	ssize_t ret, off;
+	union { u64 v64; u32 v32; u16 v16; } u;
+
+	ndev = filp->private_data;
+	mmio = ndev->self_mmio;
+
+	buf_size = min(count, 0x800ul);
+
+	buf = kmalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	off = 0;
+
+	off += scnprintf(buf + off, buf_size - off,
+			 "NTB Device Information:\n");
+
+	off += scnprintf(buf + off, buf_size - off,
+			 "Connection Topology -\t%s\n",
+			 ntb_topo_string(ndev->ntb.topo));
+
+	off += scnprintf(buf + off, buf_size - off,
+			 "NTB CTL -\t\t%#06x\n", ndev->ntb_ctl);
+	off += scnprintf(buf + off, buf_size - off,
+			 "LNK STA (cached) -\t\t%#06x\n", ndev->lnk_sta);
+
+	if (!ndev->reg->link_is_up(ndev))
+		off += scnprintf(buf + off, buf_size - off,
+				 "Link Status -\t\tDown\n");
+	else {
+		off += scnprintf(buf + off, buf_size - off,
+				 "Link Status -\t\tUp\n");
+		off += scnprintf(buf + off, buf_size - off,
+				 "Link Speed -\t\tPCI-E Gen %u\n",
+				 NTB_LNK_STA_SPEED(ndev->lnk_sta));
+		off += scnprintf(buf + off, buf_size - off,
+				 "Link Width -\t\tx%u\n",
+				 NTB_LNK_STA_WIDTH(ndev->lnk_sta));
+	}
+
+	off += scnprintf(buf + off, buf_size - off,
+			 "Memory Window Count -\t%u\n", ndev->mw_count);
+	off += scnprintf(buf + off, buf_size - off,
+			 "Scratchpad Count -\t%u\n", ndev->spad_count);
+	off += scnprintf(buf + off, buf_size - off,
+			 "Doorbell Count -\t%u\n", ndev->db_count);
+	off += scnprintf(buf + off, buf_size - off,
+			 "Doorbell Vector Count -\t%u\n", ndev->db_vec_count);
+	off += scnprintf(buf + off, buf_size - off,
+			 "Doorbell Vector Shift -\t%u\n", ndev->db_vec_shift);
+
+	off += scnprintf(buf + off, buf_size - off,
+			 "Doorbell Valid Mask -\t%#llx\n", ndev->db_valid_mask);
+	off += scnprintf(buf + off, buf_size - off,
+			 "Doorbell Link Mask -\t%#llx\n", ndev->db_link_mask);
+	off += scnprintf(buf + off, buf_size - off,
+			 "Doorbell Mask Cached -\t%#llx\n", ndev->db_mask);
+
+	u.v64 = ndev_db_read(ndev, mmio + ndev->self_reg->db_mask);
+	off += scnprintf(buf + off, buf_size - off,
+			 "Doorbell Mask -\t\t%#llx\n", u.v64);
+
+	off += scnprintf(buf + off, buf_size - off,
+			 "\nNTB Incoming XLAT:\n");
+
+	u.v64 = ioread64(mmio + GEN4_IM23XBASE_OFFSET);
+	off += scnprintf(buf + off, buf_size - off,
+			 "IM23XBASE -\t\t%#018llx\n", u.v64);
+
+	u.v64 = ioread64(mmio + GEN4_IM45XBASE_OFFSET);
+	off += scnprintf(buf + off, buf_size - off,
+			 "IM45XBASE -\t\t%#018llx\n", u.v64);
+
+	u.v64 = ioread64(mmio + GEN4_IM23XLMT_OFFSET);
+	off += scnprintf(buf + off, buf_size - off,
+			 "IM23XLMT -\t\t\t%#018llx\n", u.v64);
+
+	u.v64 = ioread64(mmio + GEN4_IM45XLMT_OFFSET);
+	off += scnprintf(buf + off, buf_size - off,
+			 "IM45XLMT -\t\t\t%#018llx\n", u.v64);
+
+	off += scnprintf(buf + off, buf_size - off,
+			 "\nNTB Statistics:\n");
+
+	off += scnprintf(buf + off, buf_size - off,
+			 "\nNTB Hardware Errors:\n");
+
+	if (!pci_read_config_word(ndev->ntb.pdev,
+				  GEN4_DEVSTS_OFFSET, &u.v16))
+		off += scnprintf(buf + off, buf_size - off,
+				"DEVSTS -\t\t%#06x\n", u.v16);
+
+	u.v16 = ioread16(mmio + GEN4_LINK_STATUS_OFFSET);
+	off += scnprintf(buf + off, buf_size - off,
+			"LNKSTS -\t\t%#06x\n", u.v16);
+
+	if (!pci_read_config_dword(ndev->ntb.pdev,
+				   GEN4_UNCERRSTS_OFFSET, &u.v32))
+		off += scnprintf(buf + off, buf_size - off,
+				 "UNCERRSTS -\t\t%#06x\n", u.v32);
+
+	if (!pci_read_config_dword(ndev->ntb.pdev,
+				   GEN4_CORERRSTS_OFFSET, &u.v32))
+		off += scnprintf(buf + off, buf_size - off,
+				 "CORERRSTS -\t\t%#06x\n", u.v32);
+
+	ret = simple_read_from_buffer(ubuf, count, offp, buf, off);
+	kfree(buf);
+	return ret;
+}
+
+static int intel_ntb4_mw_set_trans(struct ntb_dev *ntb, int pidx, int idx,
+				   dma_addr_t addr, resource_size_t size)
+{
+	struct intel_ntb_dev *ndev = ntb_ndev(ntb);
+	unsigned long xlat_reg, limit_reg, idx_reg;
+	unsigned short base_idx, reg_val16;
+	resource_size_t bar_size, mw_size;
+	void __iomem *mmio;
+	u64 base, limit, reg_val;
+	int bar;
+
+	if (pidx != NTB_DEF_PEER_IDX)
+		return -EINVAL;
+
+	if (idx >= ndev->b2b_idx && !ndev->b2b_off)
+		idx += 1;
+
+	bar = ndev_mw_to_bar(ndev, idx);
+	if (bar < 0)
+		return bar;
+
+	bar_size = pci_resource_len(ndev->ntb.pdev, bar);
+
+	if (idx == ndev->b2b_idx)
+		mw_size = bar_size - ndev->b2b_off;
+	else
+		mw_size = bar_size;
+
+	/* hardware requires that addr is aligned to bar size */
+	if (addr & (bar_size - 1))
+		return -EINVAL;
+
+	/* make sure the range fits in the usable mw size */
+	if (size > mw_size)
+		return -EINVAL;
+
+	mmio = ndev->self_mmio;
+	xlat_reg = ndev->xlat_reg->bar2_xlat + (idx * 0x10);
+	limit_reg = ndev->xlat_reg->bar2_limit + (idx * 0x10);
+	idx_reg = ndev->xlat_reg->bar2_idx + (idx * 0x2);
+	base = pci_resource_start(ndev->ntb.pdev, bar);
+
+	/* Set the limit if supported, if size is not mw_size */
+	if (limit_reg && size != mw_size) {
+		limit = base + size;
+		base_idx = __ilog2_u64(size);
+	} else {
+		limit = base + mw_size;
+		base_idx = __ilog2_u64(mw_size);
+	}
+
+
+	/* set and verify setting the translation address */
+	iowrite64(addr, mmio + xlat_reg);
+	reg_val = ioread64(mmio + xlat_reg);
+	if (reg_val != addr) {
+		iowrite64(0, mmio + xlat_reg);
+		return -EIO;
+	}
+
+	dev_dbg(&ntb->pdev->dev, "BAR %d IMXBASE: %#Lx\n", bar, reg_val);
+
+	/* set and verify setting the limit */
+	iowrite64(limit, mmio + limit_reg);
+	reg_val = ioread64(mmio + limit_reg);
+	if (reg_val != limit) {
+		iowrite64(base, mmio + limit_reg);
+		iowrite64(0, mmio + xlat_reg);
+		return -EIO;
+	}
+
+	dev_dbg(&ntb->pdev->dev, "BAR %d IMXLMT: %#Lx\n", bar, reg_val);
+
+	iowrite16(base_idx, mmio + idx_reg);
+	reg_val16 = ioread16(mmio + idx_reg);
+	if (reg_val16 != base_idx) {
+		iowrite64(base, mmio + limit_reg);
+		iowrite64(0, mmio + xlat_reg);
+		iowrite16(0, mmio + idx_reg);
+		return -EIO;
+	}
+
+	dev_dbg(&ntb->pdev->dev, "BAR %d IMBASEIDX: %#x\n", bar, reg_val16);
+
+	return 0;
+}
+
+static int intel_ntb4_link_enable(struct ntb_dev *ntb,
+		enum ntb_speed max_speed, enum ntb_width max_width)
+{
+	struct intel_ntb_dev *ndev;
+	u32 ntb_ctl, ppd0;
+	u16 lnkctl;
+
+	ndev = container_of(ntb, struct intel_ntb_dev, ntb);
+
+	dev_dbg(&ntb->pdev->dev,
+			"Enabling link with max_speed %d max_width %d\n",
+			max_speed, max_width);
+
+	if (max_speed != NTB_SPEED_AUTO)
+		dev_dbg(&ntb->pdev->dev,
+				"ignoring max_speed %d\n", max_speed);
+	if (max_width != NTB_WIDTH_AUTO)
+		dev_dbg(&ntb->pdev->dev,
+				"ignoring max_width %d\n", max_width);
+
+	ntb_ctl = NTB_CTL_E2I_BAR23_SNOOP | NTB_CTL_I2E_BAR23_SNOOP;
+	ntb_ctl |= NTB_CTL_E2I_BAR45_SNOOP | NTB_CTL_I2E_BAR45_SNOOP;
+	iowrite32(ntb_ctl, ndev->self_mmio + ndev->reg->ntb_ctl);
+
+	lnkctl = ioread16(ndev->self_mmio + GEN4_LINK_CTRL_OFFSET);
+	lnkctl &= ~GEN4_LINK_CTRL_LINK_DISABLE;
+	iowrite16(lnkctl, ndev->self_mmio + GEN4_LINK_CTRL_OFFSET);
+
+	/* start link training in PPD0 */
+	ppd0 = ioread32(ndev->self_mmio + GEN4_PPD0_OFFSET);
+	ppd0 |= GEN4_PPD_LINKTRN;
+	iowrite32(ppd0, ndev->self_mmio + GEN4_PPD0_OFFSET);
+
+	/* make sure link training has started */
+	ppd0 = ioread32(ndev->self_mmio + GEN4_PPD0_OFFSET);
+	if (!(ppd0 & GEN4_PPD_LINKTRN)) {
+		dev_warn(&ntb->pdev->dev, "Link is not training\n");
+		return -ENXIO;
+	}
+
+	ndev->dev_up = 1;
+
+	return 0;
+}
+
+int intel_ntb4_link_disable(struct ntb_dev *ntb)
+{
+	struct intel_ntb_dev *ndev;
+	u32 ntb_cntl;
+	u16 lnkctl;
+
+	ndev = container_of(ntb, struct intel_ntb_dev, ntb);
+
+	dev_dbg(&ntb->pdev->dev, "Disabling link\n");
+
+	/* clear the snoop bits */
+	ntb_cntl = ioread32(ndev->self_mmio + ndev->reg->ntb_ctl);
+	ntb_cntl &= ~(NTB_CTL_E2I_BAR23_SNOOP | NTB_CTL_I2E_BAR23_SNOOP);
+	ntb_cntl &= ~(NTB_CTL_E2I_BAR45_SNOOP | NTB_CTL_I2E_BAR45_SNOOP);
+	iowrite32(ntb_cntl, ndev->self_mmio + ndev->reg->ntb_ctl);
+
+	lnkctl = ioread16(ndev->self_mmio + GEN4_LINK_CTRL_OFFSET);
+	lnkctl |= GEN4_LINK_CTRL_LINK_DISABLE;
+	iowrite16(lnkctl, ndev->self_mmio + GEN4_LINK_CTRL_OFFSET);
+
+	ndev->dev_up = 0;
+
+	return 0;
+}
+
+const struct ntb_dev_ops intel_ntb4_ops = {
+	.mw_count		= intel_ntb_mw_count,
+	.mw_get_align		= intel_ntb_mw_get_align,
+	.mw_set_trans		= intel_ntb4_mw_set_trans,
+	.peer_mw_count		= intel_ntb_peer_mw_count,
+	.peer_mw_get_addr	= intel_ntb_peer_mw_get_addr,
+	.link_is_up		= intel_ntb_link_is_up,
+	.link_enable		= intel_ntb4_link_enable,
+	.link_disable		= intel_ntb4_link_disable,
+	.db_valid_mask		= intel_ntb_db_valid_mask,
+	.db_vector_count	= intel_ntb_db_vector_count,
+	.db_vector_mask		= intel_ntb_db_vector_mask,
+	.db_read		= intel_ntb3_db_read,
+	.db_clear		= intel_ntb3_db_clear,
+	.db_set_mask		= intel_ntb_db_set_mask,
+	.db_clear_mask		= intel_ntb_db_clear_mask,
+	.peer_db_addr		= intel_ntb3_peer_db_addr,
+	.peer_db_set		= intel_ntb3_peer_db_set,
+	.spad_is_unsafe		= intel_ntb_spad_is_unsafe,
+	.spad_count		= intel_ntb_spad_count,
+	.spad_read		= intel_ntb_spad_read,
+	.spad_write		= intel_ntb_spad_write,
+	.peer_spad_addr		= intel_ntb_peer_spad_addr,
+	.peer_spad_read		= intel_ntb_peer_spad_read,
+	.peer_spad_write	= intel_ntb_peer_spad_write,
+};
+
diff --git a/drivers/ntb/hw/intel/ntb_hw_gen4.h b/drivers/ntb/hw/intel/ntb_hw_gen4.h
new file mode 100644
index 000000000000..7d7a82e8518d
--- /dev/null
+++ b/drivers/ntb/hw/intel/ntb_hw_gen4.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)          */
+/* Copyright(c) 2020 Intel Corporation. All rights reserved.   */
+#ifndef _NTB_INTEL_GEN4_H_
+#define _NTB_INTEL_GEN4_H_
+
+#include "ntb_hw_intel.h"
+
+/* Intel Gen4 NTB hardware */
+/* PCIe config space */
+#define GEN4_IMBAR23SZ_OFFSET		0x00c4
+#define GEN4_IMBAR45SZ_OFFSET		0x00c5
+#define GEN4_EMBAR23SZ_OFFSET		0x00c6
+#define GEN4_EMBAR45SZ_OFFSET		0x00c7
+#define GEN4_DEVCTRL_OFFSET		0x0048
+#define GEN4_DEVSTS_OFFSET		0x004a
+#define GEN4_UNCERRSTS_OFFSET		0x0104
+#define GEN4_CORERRSTS_OFFSET		0x0110
+
+/* BAR0 MMIO */
+#define GEN4_NTBCNTL_OFFSET		0x0000
+#define GEN4_IM23XBASE_OFFSET		0x0010	/* IMBAR1XBASE */
+#define GEN4_IM23XLMT_OFFSET		0x0018  /* IMBAR1XLMT */
+#define GEN4_IM45XBASE_OFFSET		0x0020	/* IMBAR2XBASE */
+#define GEN4_IM45XLMT_OFFSET		0x0028  /* IMBAR2XLMT */
+#define GEN4_IM_INT_STATUS_OFFSET	0x0040
+#define GEN4_IM_INT_DISABLE_OFFSET	0x0048
+#define GEN4_INTVEC_OFFSET		0x0050  /* 0-32 vecs */
+#define GEN4_IM23XBASEIDX_OFFSET	0x0074
+#define GEN4_IM45XBASEIDX_OFFSET	0x0076
+#define GEN4_IM_SPAD_OFFSET		0x0080  /* 0-15 SPADs */
+#define GEN4_IM_SPAD_SEM_OFFSET		0x00c0	/* SPAD hw semaphore */
+#define GEN4_IM_SPAD_STICKY_OFFSET	0x00c4  /* sticky SPAD */
+#define GEN4_IM_DOORBELL_OFFSET		0x0100  /* 0-31 doorbells */
+#define GEN4_EM_SPAD_OFFSET		0x8080
+/* note, link status is now in MMIO and not config space for NTB */
+#define GEN4_LINK_CTRL_OFFSET		0xb050
+#define GEN4_LINK_STATUS_OFFSET		0xb052
+#define GEN4_PPD0_OFFSET		0xb0d4
+#define GEN4_PPD1_OFFSET		0xb4c0
+#define GEN4_LTSSMSTATEJMP		0xf040
+
+#define GEN4_PPD_CLEAR_TRN		0x0001
+#define GEN4_PPD_LINKTRN		0x0008
+#define GEN4_PPD_CONN_MASK		0x0300
+#define GEN4_PPD_CONN_B2B		0x0200
+#define GEN4_PPD_DEV_MASK		0x1000
+#define GEN4_PPD_DEV_DSD		0x1000
+#define GEN4_PPD_DEV_USD		0x0000
+#define GEN4_LINK_CTRL_LINK_DISABLE	0x0010
+
+#define GEN4_SLOTSTS			0xb05a
+#define GEN4_SLOTSTS_DLLSCS		0x100
+
+#define GEN4_PPD_TOPO_MASK	(GEN4_PPD_CONN_MASK | GEN4_PPD_DEV_MASK)
+#define GEN4_PPD_TOPO_B2B_USD	(GEN4_PPD_CONN_B2B | GEN4_PPD_DEV_USD)
+#define GEN4_PPD_TOPO_B2B_DSD	(GEN4_PPD_CONN_B2B | GEN4_PPD_DEV_DSD)
+
+#define GEN4_DB_COUNT			32
+#define GEN4_DB_LINK			32
+#define GEN4_DB_LINK_BIT		BIT_ULL(GEN4_DB_LINK)
+#define GEN4_DB_MSIX_VECTOR_COUNT	33
+#define GEN4_DB_MSIX_VECTOR_SHIFT	1
+#define GEN4_DB_TOTAL_SHIFT		33
+#define GEN4_SPAD_COUNT			16
+
+#define NTB_CTL_E2I_BAR23_SNOOP		0x000004
+#define NTB_CTL_E2I_BAR23_NOSNOOP	0x000008
+#define NTB_CTL_I2E_BAR23_SNOOP		0x000010
+#define NTB_CTL_I2E_BAR23_NOSNOOP	0x000020
+#define NTB_CTL_E2I_BAR45_SNOOP		0x000040
+#define NTB_CTL_E2I_BAR45_NOSNOO	0x000080
+#define NTB_CTL_I2E_BAR45_SNOOP		0x000100
+#define NTB_CTL_I2E_BAR45_NOSNOOP	0x000200
+#define NTB_CTL_BUSNO_DIS_INC		0x000400
+#define NTB_CTL_LINK_DOWN		0x010000
+
+#define NTB_SJC_FORCEDETECT		0x000004
+
+ssize_t ndev_ntb4_debugfs_read(struct file *filp, char __user *ubuf,
+				      size_t count, loff_t *offp);
+int gen4_init_dev(struct intel_ntb_dev *ndev);
+ssize_t ndev_ntb4_debugfs_read(struct file *filp, char __user *ubuf,
+				      size_t count, loff_t *offp);
+
+extern const struct ntb_dev_ops intel_ntb4_ops;
+
+#endif
diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.h b/drivers/ntb/hw/intel/ntb_hw_intel.h
index e071e28bca3f..d61fcd91714b 100644
--- a/drivers/ntb/hw/intel/ntb_hw_intel.h
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.h
@@ -72,6 +72,7 @@
 #define PCI_DEVICE_ID_INTEL_NTB_PS_BDX	0x6F0E
 #define PCI_DEVICE_ID_INTEL_NTB_SS_BDX	0x6F0F
 #define PCI_DEVICE_ID_INTEL_NTB_B2B_SKX	0x201C
+#define PCI_DEVICE_ID_INTEL_NTB_B2B_ICX	0x347e
 
 /* Ntb control and link status */
 #define NTB_CTL_CFG_LOCK		BIT(0)
@@ -120,6 +121,7 @@ struct intel_ntb_xlat_reg {
 	unsigned long			bar0_base;
 	unsigned long			bar2_xlat;
 	unsigned long			bar2_limit;
+	unsigned short			bar2_idx;
 };
 
 struct intel_b2b_addr {
@@ -182,6 +184,9 @@ struct intel_ntb_dev {
 
 	struct dentry			*debugfs_dir;
 	struct dentry			*debugfs_info;
+
+	/* gen4 entries */
+	int				dev_up;
 };
 
 #define ntb_ndev(__ntb) container_of(__ntb, struct intel_ntb_dev, ntb)
@@ -219,4 +224,11 @@ static inline int pdev_is_gen3(struct pci_dev *pdev)
 	return 0;
 }
 
+static inline int pdev_is_gen4(struct pci_dev *pdev)
+{
+	if (pdev->device == PCI_DEVICE_ID_INTEL_NTB_B2B_ICX)
+		return 1;
+
+	return 0;
+}
 #endif
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index 972f6d984f6d..c72dae6c4c94 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -159,6 +159,8 @@ struct perf_peer {
 	/* NTB connection setup service */
 	struct work_struct	service;
 	unsigned long		sts;
+
+	struct completion init_comp;
 };
 #define to_peer_service(__work) \
 	container_of(__work, struct perf_peer, service)
@@ -547,6 +549,7 @@ static int perf_setup_outbuf(struct perf_peer *peer)
 
 	/* Initialization is finally done */
 	set_bit(PERF_STS_DONE, &peer->sts);
+	complete_all(&peer->init_comp);
 
 	return 0;
 }
@@ -557,7 +560,7 @@ static void perf_free_inbuf(struct perf_peer *peer)
 		return;
 
 	(void)ntb_mw_clear_trans(peer->perf->ntb, peer->pidx, peer->gidx);
-	dma_free_coherent(&peer->perf->ntb->dev, peer->inbuf_size,
+	dma_free_coherent(&peer->perf->ntb->pdev->dev, peer->inbuf_size,
 			  peer->inbuf, peer->inbuf_xlat);
 	peer->inbuf = NULL;
 }
@@ -586,8 +589,8 @@ static int perf_setup_inbuf(struct perf_peer *peer)
 
 	perf_free_inbuf(peer);
 
-	peer->inbuf = dma_alloc_coherent(&perf->ntb->dev, peer->inbuf_size,
-					 &peer->inbuf_xlat, GFP_KERNEL);
+	peer->inbuf = dma_alloc_coherent(&perf->ntb->pdev->dev,
+			peer->inbuf_size, &peer->inbuf_xlat, GFP_KERNEL);
 	if (!peer->inbuf) {
 		dev_err(&perf->ntb->dev, "Failed to alloc inbuf of %pa\n",
 			&peer->inbuf_size);
@@ -637,6 +640,7 @@ static void perf_service_work(struct work_struct *work)
 		perf_setup_outbuf(peer);
 
 	if (test_and_clear_bit(PERF_CMD_CLEAR, &peer->sts)) {
+		init_completion(&peer->init_comp);
 		clear_bit(PERF_STS_DONE, &peer->sts);
 		if (test_bit(0, &peer->perf->busy_flag) &&
 		    peer == peer->perf->test_peer) {
@@ -653,7 +657,7 @@ static int perf_init_service(struct perf_ctx *perf)
 {
 	u64 mask;
 
-	if (ntb_peer_mw_count(perf->ntb) < perf->pcnt + 1) {
+	if (ntb_peer_mw_count(perf->ntb) < perf->pcnt) {
 		dev_err(&perf->ntb->dev, "Not enough memory windows\n");
 		return -EINVAL;
 	}
@@ -1010,8 +1014,8 @@ static void perf_clear_test(struct perf_thread *pthr)
 				   pthr->perf->test_peer->dma_dst_addr,
 				   pthr->perf->test_peer->outbuf_size,
 				   DMA_FROM_DEVICE, 0);
-	if (pthr->dma_chan)
-		dma_release_channel(pthr->dma_chan);
+
+	dma_release_channel(pthr->dma_chan);
 
 no_dma_notify:
 	atomic_dec(&perf->tsync);
@@ -1083,8 +1087,9 @@ static int perf_submit_test(struct perf_peer *peer)
 	struct perf_thread *pthr;
 	int tidx, ret;
 
-	if (!test_bit(PERF_STS_DONE, &peer->sts))
-		return -ENOLINK;
+	ret = wait_for_completion_interruptible(&peer->init_comp);
+	if (ret < 0)
+		return ret;
 
 	if (test_and_set_bit_lock(0, &perf->busy_flag))
 		return -EBUSY;
@@ -1455,10 +1460,21 @@ static int perf_init_peers(struct perf_ctx *perf)
 			peer->gidx = pidx;
 		}
 		INIT_WORK(&peer->service, perf_service_work);
+		init_completion(&peer->init_comp);
 	}
 	if (perf->gidx == -1)
 		perf->gidx = pidx;
 
+	/*
+	 * Hardware with only two ports may not have unique port
+	 * numbers. In this case, the gidxs should all be zero.
+	 */
+	if (perf->pcnt == 1 &&  ntb_port_number(perf->ntb) == 0 &&
+	    ntb_peer_port_number(perf->ntb, 0) == 0) {
+		perf->gidx = 0;
+		perf->peers[0].gidx = 0;
+	}
+
 	for (pidx = 0; pidx < perf->pcnt; pidx++) {
 		ret = perf_setup_peer_mw(&perf->peers[pidx]);
 		if (ret)
@@ -1554,4 +1570,3 @@ static void __exit perf_exit(void)
 	destroy_workqueue(perf_wq);
 }
 module_exit(perf_exit);
-
diff --git a/drivers/ntb/test/ntb_pingpong.c b/drivers/ntb/test/ntb_pingpong.c
index 04dd46647db3..2164e8492772 100644
--- a/drivers/ntb/test/ntb_pingpong.c
+++ b/drivers/ntb/test/ntb_pingpong.c
@@ -121,15 +121,14 @@ static int pp_find_next_peer(struct pp_ctx *pp)
 	link = ntb_link_is_up(pp->ntb, NULL, NULL);
 
 	/* Find next available peer */
-	if (link & pp->nmask) {
+	if (link & pp->nmask)
 		pidx = __ffs64(link & pp->nmask);
-		out_db = BIT_ULL(pidx + 1);
-	} else if (link & pp->pmask) {
+	else if (link & pp->pmask)
 		pidx = __ffs64(link & pp->pmask);
-		out_db = BIT_ULL(pidx);
-	} else {
+	else
 		return -ENODEV;
-	}
+
+	out_db = BIT_ULL(ntb_peer_port_number(pp->ntb, pidx));
 
 	spin_lock(&pp->lock);
 	pp->out_pidx = pidx;
@@ -303,7 +302,7 @@ static void pp_init_flds(struct pp_ctx *pp)
 			break;
 	}
 
-	pp->in_db = BIT_ULL(pidx);
+	pp->in_db = BIT_ULL(lport);
 	pp->pmask = GENMASK_ULL(pidx, 0) >> 1;
 	pp->nmask = GENMASK_ULL(pcnt - 1, pidx);
 
@@ -432,4 +431,3 @@ static void __exit pp_exit(void)
 	debugfs_remove_recursive(pp_dbgfs_topdir);
 }
 module_exit(pp_exit);
-
diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c
index 69da758fe64c..b7bf3f863d79 100644
--- a/drivers/ntb/test/ntb_tool.c
+++ b/drivers/ntb/test/ntb_tool.c
@@ -504,7 +504,7 @@ static ssize_t tool_peer_link_read(struct file *filep, char __user *ubuf,
 	buf[1] = '\n';
 	buf[2] = '\0';
 
-	return simple_read_from_buffer(ubuf, size, offp, buf, 3);
+	return simple_read_from_buffer(ubuf, size, offp, buf, 2);
 }
 
 static TOOL_FOPS_RDWR(tool_peer_link_fops,
@@ -590,7 +590,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx,
 	inmw->size = min_t(resource_size_t, req_size, size);
 	inmw->size = round_up(inmw->size, addr_align);
 	inmw->size = round_up(inmw->size, size_align);
-	inmw->mm_base = dma_alloc_coherent(&tc->ntb->dev, inmw->size,
+	inmw->mm_base = dma_alloc_coherent(&tc->ntb->pdev->dev, inmw->size,
 					   &inmw->dma_base, GFP_KERNEL);
 	if (!inmw->mm_base)
 		return -ENOMEM;
@@ -612,7 +612,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx,
 	return 0;
 
 err_free_dma:
-	dma_free_coherent(&tc->ntb->dev, inmw->size, inmw->mm_base,
+	dma_free_coherent(&tc->ntb->pdev->dev, inmw->size, inmw->mm_base,
 			  inmw->dma_base);
 	inmw->mm_base = NULL;
 	inmw->dma_base = 0;
@@ -629,7 +629,7 @@ static void tool_free_mw(struct tool_ctx *tc, int pidx, int widx)
 
 	if (inmw->mm_base != NULL) {
 		ntb_mw_clear_trans(tc->ntb, pidx, widx);
-		dma_free_coherent(&tc->ntb->dev, inmw->size,
+		dma_free_coherent(&tc->ntb->pdev->dev, inmw->size,
 				  inmw->mm_base, inmw->dma_base);
 	}
 
@@ -1690,4 +1690,3 @@ static void __exit tool_exit(void)
 	debugfs_remove_recursive(tool_dbgfs_topdir);
 }
 module_exit(tool_exit);
-
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 7dfc4a2ecf1e..887537d1243f 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -96,7 +96,7 @@ struct nvme_fc_fcp_op {
 struct nvme_fcp_op_w_sgl {
 	struct nvme_fc_fcp_op	op;
 	struct scatterlist	sgl[NVME_INLINE_SG_CNT];
-	uint8_t			priv[0];
+	uint8_t			priv[];
 };
 
 struct nvme_fc_lport {
diff --git a/drivers/nvme/host/lightnvm.c b/drivers/nvme/host/lightnvm.c
index ec46693f6b64..3002bf972c6b 100644
--- a/drivers/nvme/host/lightnvm.c
+++ b/drivers/nvme/host/lightnvm.c
@@ -171,7 +171,7 @@ struct nvme_nvm_bb_tbl {
 	__le32	tdresv;
 	__le32	thresv;
 	__le32	rsvd2[8];
-	__u8	blk[0];
+	__u8	blk[];
 };
 
 struct nvme_nvm_id20_addrf {
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 05c6ae4b0b97..927eb5f6003f 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -66,6 +66,30 @@ static LIST_HEAD(nvmem_lookup_list);
 
 static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
 
+static int nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
+			  void *val, size_t bytes)
+{
+	if (nvmem->reg_read)
+		return nvmem->reg_read(nvmem->priv, offset, val, bytes);
+
+	return -EINVAL;
+}
+
+static int nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
+			   void *val, size_t bytes)
+{
+	int ret;
+
+	if (nvmem->reg_write) {
+		gpiod_set_value_cansleep(nvmem->wp_gpio, 0);
+		ret = nvmem->reg_write(nvmem->priv, offset, val, bytes);
+		gpiod_set_value_cansleep(nvmem->wp_gpio, 1);
+		return ret;
+	}
+
+	return -EINVAL;
+}
+
 #ifdef CONFIG_NVMEM_SYSFS
 static const char * const nvmem_type_str[] = {
 	[NVMEM_TYPE_UNKNOWN] = "Unknown",
@@ -122,7 +146,7 @@ static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj,
 	if (!nvmem->reg_read)
 		return -EPERM;
 
-	rc = nvmem->reg_read(nvmem->priv, pos, buf, count);
+	rc = nvmem_reg_read(nvmem, pos, buf, count);
 
 	if (rc)
 		return rc;
@@ -159,7 +183,7 @@ static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj,
 	if (!nvmem->reg_write)
 		return -EPERM;
 
-	rc = nvmem->reg_write(nvmem->priv, pos, buf, count);
+	rc = nvmem_reg_write(nvmem, pos, buf, count);
 
 	if (rc)
 		return rc;
@@ -167,11 +191,8 @@ static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj,
 	return count;
 }
 
-static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
-					 struct bin_attribute *attr, int i)
+static umode_t nvmem_bin_attr_get_umode(struct nvmem_device *nvmem)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct nvmem_device *nvmem = to_nvmem_device(dev);
 	umode_t mode = 0400;
 
 	if (!nvmem->root_only)
@@ -189,6 +210,15 @@ static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
 	return mode;
 }
 
+static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
+					 struct bin_attribute *attr, int i)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	return nvmem_bin_attr_get_umode(nvmem);
+}
+
 /* default read/write permissions */
 static struct bin_attribute bin_attr_rw_nvmem = {
 	.attr	= {
@@ -215,34 +245,14 @@ static const struct attribute_group *nvmem_dev_groups[] = {
 	NULL,
 };
 
-/* read only permission */
-static struct bin_attribute bin_attr_ro_nvmem = {
+static struct bin_attribute bin_attr_nvmem_eeprom_compat = {
 	.attr	= {
-		.name	= "nvmem",
-		.mode	= 0444,
-	},
-	.read	= bin_attr_nvmem_read,
-};
-
-/* default read/write permissions, root only */
-static struct bin_attribute bin_attr_rw_root_nvmem = {
-	.attr	= {
-		.name	= "nvmem",
-		.mode	= 0600,
+		.name	= "eeprom",
 	},
 	.read	= bin_attr_nvmem_read,
 	.write	= bin_attr_nvmem_write,
 };
 
-/* read only permission, root only */
-static struct bin_attribute bin_attr_ro_root_nvmem = {
-	.attr	= {
-		.name	= "nvmem",
-		.mode	= 0400,
-	},
-	.read	= bin_attr_nvmem_read,
-};
-
 /*
  * nvmem_setup_compat() - Create an additional binary entry in
  * drivers sys directory, to be backwards compatible with the older
@@ -259,18 +269,8 @@ static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
 	if (!config->base_dev)
 		return -EINVAL;
 
-	if (nvmem->read_only) {
-		if (config->root_only)
-			nvmem->eeprom = bin_attr_ro_root_nvmem;
-		else
-			nvmem->eeprom = bin_attr_ro_nvmem;
-	} else {
-		if (config->root_only)
-			nvmem->eeprom = bin_attr_rw_root_nvmem;
-		else
-			nvmem->eeprom = bin_attr_rw_nvmem;
-	}
-	nvmem->eeprom.attr.name = "eeprom";
+	nvmem->eeprom = bin_attr_nvmem_eeprom_compat;
+	nvmem->eeprom.attr.mode = nvmem_bin_attr_get_umode(nvmem);
 	nvmem->eeprom.size = nvmem->size;
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 	nvmem->eeprom.attr.key = &eeprom_lock_key;
@@ -311,30 +311,6 @@ static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
 
 #endif /* CONFIG_NVMEM_SYSFS */
 
-static int nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
-			  void *val, size_t bytes)
-{
-	if (nvmem->reg_read)
-		return nvmem->reg_read(nvmem->priv, offset, val, bytes);
-
-	return -EINVAL;
-}
-
-static int nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
-			   void *val, size_t bytes)
-{
-	int ret;
-
-	if (nvmem->reg_write) {
-		gpiod_set_value_cansleep(nvmem->wp_gpio, 0);
-		ret = nvmem->reg_write(nvmem->priv, offset, val, bytes);
-		gpiod_set_value_cansleep(nvmem->wp_gpio, 1);
-		return ret;
-	}
-
-	return -EINVAL;
-}
-
 static void nvmem_release(struct device *dev)
 {
 	struct nvmem_device *nvmem = to_nvmem_device(dev);
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 50bea2aadc1b..7a1ebd6fd08b 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -196,7 +196,6 @@ static int imx_ocotp_read(void *context, unsigned int offset,
 		if (*(buf - 1) == IMX_OCOTP_READ_LOCKED_VAL)
 			imx_ocotp_clr_err_if_set(priv);
 	}
-	ret = 0;
 
 read_end:
 	clk_disable_unprepare(priv->clk);
@@ -435,17 +434,13 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	       priv->base + IMX_OCOTP_ADDR_CTRL_SET);
 	ret = imx_ocotp_wait_for_busy(priv,
 				      priv->params->ctrl.bm_rel_shadows);
-	if (ret < 0) {
+	if (ret < 0)
 		dev_err(priv->dev, "timeout during shadow register reload\n");
-		goto write_end;
-	}
 
 write_end:
 	clk_disable_unprepare(priv->clk);
 	mutex_unlock(&ocotp_mutex);
-	if (ret < 0)
-		return ret;
-	return bytes;
+	return ret < 0 ? ret : bytes;
 }
 
 static struct nvmem_config imx_ocotp_nvmem_config = {
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 08fd823edac9..fe64430b438a 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -286,7 +286,6 @@ int of_detach_node(struct device_node *np)
 {
 	struct of_reconfig_data rd;
 	unsigned long flags;
-	int rc = 0;
 
 	memset(&rd, 0, sizeof(rd));
 	rd.dn = np;
@@ -301,7 +300,7 @@ int of_detach_node(struct device_node *np)
 
 	of_reconfig_notify(OF_RECONFIG_DETACH_NODE, &rd);
 
-	return rc;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(of_detach_node);
 
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 2cdf64d2456f..8a8e07a8f03d 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1078,7 +1078,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
 #endif
 #endif /* CONFIG_CMDLINE */
 
-	pr_debug("Command line is: %s\n", (char*)data);
+	pr_debug("Command line is: %s\n", (char *)data);
 
 	rng_seed = of_get_flat_dt_prop(node, "rng-seed", &l);
 	if (rng_seed && l > 0) {
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 9f982c0627a0..a04afe79529c 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -60,39 +60,15 @@ static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
 	return register_mii_timestamper(arg.np, arg.args[0]);
 }
 
-static int of_mdiobus_register_phy(struct mii_bus *mdio,
-				    struct device_node *child, u32 addr)
+int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
+			      struct device_node *child, u32 addr)
 {
-	struct mii_timestamper *mii_ts;
-	struct phy_device *phy;
-	bool is_c45;
 	int rc;
-	u32 phy_id;
-
-	mii_ts = of_find_mii_timestamper(child);
-	if (IS_ERR(mii_ts))
-		return PTR_ERR(mii_ts);
-
-	is_c45 = of_device_is_compatible(child,
-					 "ethernet-phy-ieee802.3-c45");
-
-	if (!is_c45 && !of_get_phy_id(child, &phy_id))
-		phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
-	else
-		phy = get_phy_device(mdio, addr, is_c45);
-	if (IS_ERR(phy)) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		return PTR_ERR(phy);
-	}
 
 	rc = of_irq_get(child, 0);
-	if (rc == -EPROBE_DEFER) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		phy_device_free(phy);
+	if (rc == -EPROBE_DEFER)
 		return rc;
-	}
+
 	if (rc > 0) {
 		phy->irq = rc;
 		mdio->irq[addr] = rc;
@@ -117,11 +93,48 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
 	/* All data is now stored in the phy struct;
 	 * register it */
 	rc = phy_device_register(phy);
+	if (rc) {
+		of_node_put(child);
+		return rc;
+	}
+
+	dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n",
+		child, addr);
+	return 0;
+}
+EXPORT_SYMBOL(of_mdiobus_phy_device_register);
+
+static int of_mdiobus_register_phy(struct mii_bus *mdio,
+				    struct device_node *child, u32 addr)
+{
+	struct mii_timestamper *mii_ts;
+	struct phy_device *phy;
+	bool is_c45;
+	int rc;
+	u32 phy_id;
+
+	mii_ts = of_find_mii_timestamper(child);
+	if (IS_ERR(mii_ts))
+		return PTR_ERR(mii_ts);
+
+	is_c45 = of_device_is_compatible(child,
+					 "ethernet-phy-ieee802.3-c45");
+
+	if (!is_c45 && !of_get_phy_id(child, &phy_id))
+		phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
+	else
+		phy = get_phy_device(mdio, addr, is_c45);
+	if (IS_ERR(phy)) {
+		if (mii_ts)
+			unregister_mii_timestamper(mii_ts);
+		return PTR_ERR(phy);
+	}
+
+	rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
 	if (rc) {
 		if (mii_ts)
 			unregister_mii_timestamper(mii_ts);
 		phy_device_free(phy);
-		of_node_put(child);
 		return rc;
 	}
 
@@ -132,8 +145,6 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
 	if (mii_ts)
 		phy->mii_ts = mii_ts;
 
-	dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n",
-		child, addr);
 	return 0;
 }
 
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 1a84bc0d5fa8..f61e8739502a 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -357,6 +357,25 @@ int of_reserved_mem_device_init_by_idx(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(of_reserved_mem_device_init_by_idx);
 
+/**
+ * of_reserved_mem_device_init_by_name() - assign named reserved memory region
+ *					   to given device
+ * @dev: pointer to the device to configure
+ * @np: pointer to the device node with 'memory-region' property
+ * @name: name of the selected memory region
+ *
+ * Returns: 0 on success or a negative error-code on failure.
+ */
+int of_reserved_mem_device_init_by_name(struct device *dev,
+					struct device_node *np,
+					const char *name)
+{
+	int idx = of_property_match_string(np, "memory-region-names", name);
+
+	return of_reserved_mem_device_init_by_idx(dev, np, idx);
+}
+EXPORT_SYMBOL_GPL(of_reserved_mem_device_init_by_name);
+
 /**
  * of_reserved_mem_device_release() - release reserved memory device structures
  * @dev:	Pointer to the device to deconfigure
@@ -366,24 +385,22 @@ EXPORT_SYMBOL_GPL(of_reserved_mem_device_init_by_idx);
  */
 void of_reserved_mem_device_release(struct device *dev)
 {
-	struct rmem_assigned_device *rd;
-	struct reserved_mem *rmem = NULL;
+	struct rmem_assigned_device *rd, *tmp;
+	LIST_HEAD(release_list);
 
 	mutex_lock(&of_rmem_assigned_device_mutex);
-	list_for_each_entry(rd, &of_rmem_assigned_device_list, list) {
-		if (rd->dev == dev) {
-			rmem = rd->rmem;
-			list_del(&rd->list);
-			kfree(rd);
-			break;
-		}
+	list_for_each_entry_safe(rd, tmp, &of_rmem_assigned_device_list, list) {
+		if (rd->dev == dev)
+			list_move_tail(&rd->list, &release_list);
 	}
 	mutex_unlock(&of_rmem_assigned_device_mutex);
 
-	if (!rmem || !rmem->ops || !rmem->ops->device_release)
-		return;
+	list_for_each_entry_safe(rd, tmp, &release_list, list) {
+		if (rd->rmem && rd->rmem->ops && rd->rmem->ops->device_release)
+			rd->rmem->ops->device_release(rd->rmem, dev);
 
-	rmem->ops->device_release(rmem, dev);
+		kfree(rd);
+	}
 }
 EXPORT_SYMBOL_GPL(of_reserved_mem_device_release);
 
diff --git a/drivers/of/property.c b/drivers/of/property.c
index b4916dcc9e72..1f2086f4e7ce 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -1045,8 +1045,20 @@ static int of_link_to_phandle(struct device *dev, struct device_node *sup_np,
 	 * Find the device node that contains the supplier phandle.  It may be
 	 * @sup_np or it may be an ancestor of @sup_np.
 	 */
-	while (sup_np && !of_find_property(sup_np, "compatible", NULL))
+	while (sup_np) {
+
+		/* Don't allow linking to a disabled supplier */
+		if (!of_device_is_available(sup_np)) {
+			of_node_put(sup_np);
+			sup_np = NULL;
+		}
+
+		if (of_find_property(sup_np, "compatible", NULL))
+			break;
+
 		sup_np = of_get_next_parent(sup_np);
+	}
+
 	if (!sup_np) {
 		dev_dbg(dev, "Not linking to %pOFP - No device\n", tmp_np);
 		return -ENODEV;
@@ -1074,7 +1086,7 @@ static int of_link_to_phandle(struct device *dev, struct device_node *sup_np,
 		return -EAGAIN;
 	}
 	if (!device_link_add(dev, sup_dev, dl_flags))
-		ret = -EAGAIN;
+		ret = -EINVAL;
 	put_device(sup_dev);
 	return ret;
 }
@@ -1206,6 +1218,7 @@ DEFINE_SIMPLE_PROP(interrupt_parent, "interrupt-parent", NULL)
 DEFINE_SIMPLE_PROP(dmas, "dmas", "#dma-cells")
 DEFINE_SIMPLE_PROP(power_domains, "power-domains", "#power-domain-cells")
 DEFINE_SIMPLE_PROP(hwlocks, "hwlocks", "#hwlock-cells")
+DEFINE_SIMPLE_PROP(extcon, "extcon", NULL)
 DEFINE_SUFFIX_PROP(regulators, "-supply", NULL)
 DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells")
 DEFINE_SUFFIX_PROP(gpios, "-gpios", "#gpio-cells")
@@ -1230,6 +1243,7 @@ static const struct supplier_bindings of_supplier_bindings[] = {
 	{ .parse_prop = parse_dmas, },
 	{ .parse_prop = parse_power_domains, },
 	{ .parse_prop = parse_hwlocks, },
+	{ .parse_prop = parse_extcon, },
 	{ .parse_prop = parse_regulators, },
 	{ .parse_prop = parse_gpio, },
 	{ .parse_prop = parse_gpios, },
@@ -1296,7 +1310,7 @@ static int of_link_to_suppliers(struct device *dev,
 		if (of_link_property(dev, con_np, p->name))
 			ret = -ENODEV;
 
-	for_each_child_of_node(con_np, child)
+	for_each_available_child_of_node(con_np, child)
 		if (of_link_to_suppliers(dev, child) && !ret)
 			ret = -EAGAIN;
 
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
index e1d097e250ae..31478c0cff87 100644
--- a/drivers/oprofile/cpu_buffer.h
+++ b/drivers/oprofile/cpu_buffer.h
@@ -33,7 +33,7 @@ void flush_cpu_work(void);
 struct op_sample {
 	unsigned long eip;
 	unsigned long event;
-	unsigned long data[0];
+	unsigned long data[];
 };
 
 struct op_entry;
diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c
index 12ea4a4ad607..6c9edc8bbc95 100644
--- a/drivers/oprofile/event_buffer.c
+++ b/drivers/oprofile/event_buffer.c
@@ -113,7 +113,7 @@ static int event_buffer_open(struct inode *inode, struct file *file)
 {
 	int err = -EPERM;
 
-	if (!capable(CAP_SYS_ADMIN))
+	if (!perfmon_capable())
 		return -EPERM;
 
 	if (test_and_set_bit_lock(0, &buffer_opened))
diff --git a/drivers/parport/daisy.c b/drivers/parport/daisy.c
index 3b00e2c8e2e9..6d78ec3a762f 100644
--- a/drivers/parport/daisy.c
+++ b/drivers/parport/daisy.c
@@ -30,12 +30,6 @@
 
 #undef DEBUG
 
-#ifdef DEBUG
-#define DPRINTK(stuff...) printk(stuff)
-#else
-#define DPRINTK(stuff...)
-#endif
-
 static struct daisydev {
 	struct daisydev *next;
 	struct parport *port;
@@ -145,8 +139,7 @@ int parport_daisy_init(struct parport *port)
 	    ((num_ports = num_mux_ports(port)) == 2 || num_ports == 4)) {
 		/* Leave original as port zero. */
 		port->muxport = 0;
-		printk(KERN_INFO
-			"%s: 1st (default) port of %d-way multiplexor\n",
+		pr_info("%s: 1st (default) port of %d-way multiplexor\n",
 			port->name, num_ports);
 		for (i = 1; i < num_ports; i++) {
 			/* Clone the port. */
@@ -159,8 +152,7 @@ int parport_daisy_init(struct parport *port)
 				continue;
 			}
 
-			printk(KERN_INFO
-				"%s: %d%s port of %d-way multiplexor on %s\n",
+			pr_info("%s: %d%s port of %d-way multiplexor on %s\n",
 				extra->name, i + 1, th[i + 1], num_ports,
 				port->name);
 
@@ -323,8 +315,7 @@ static int cpp_daisy(struct parport *port, int cmd)
 		  | PARPORT_STATUS_PAPEROUT
 		  | PARPORT_STATUS_SELECT
 		  | PARPORT_STATUS_ERROR)) {
-		DPRINTK(KERN_DEBUG "%s: cpp_daisy: aa5500ff(%02x)\n",
-			 port->name, s);
+		pr_debug("%s: cpp_daisy: aa5500ff(%02x)\n", port->name, s);
 		return -ENXIO;
 	}
 
@@ -334,8 +325,7 @@ static int cpp_daisy(struct parport *port, int cmd)
 					  | PARPORT_STATUS_SELECT
 					  | PARPORT_STATUS_ERROR);
 	if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
-		DPRINTK(KERN_DEBUG "%s: cpp_daisy: aa5500ff87(%02x)\n",
-			 port->name, s);
+		pr_debug("%s: cpp_daisy: aa5500ff87(%02x)\n", port->name, s);
 		return -ENXIO;
 	}
 
@@ -370,7 +360,7 @@ static int cpp_mux(struct parport *port, int cmd)
 
 	s = parport_read_status(port);
 	if (!(s & PARPORT_STATUS_ACK)) {
-		DPRINTK(KERN_DEBUG "%s: cpp_mux: aa55f00f52ad%02x(%02x)\n",
+		pr_debug("%s: cpp_mux: aa55f00f52ad%02x(%02x)\n",
 			 port->name, cmd, s);
 		return -EIO;
 	}
@@ -456,8 +446,7 @@ static int assign_addrs(struct parport *port)
 		  | PARPORT_STATUS_PAPEROUT
 		  | PARPORT_STATUS_SELECT
 		  | PARPORT_STATUS_ERROR)) {
-		DPRINTK(KERN_DEBUG "%s: assign_addrs: aa5500ff(%02x)\n",
-			 port->name, s);
+		pr_debug("%s: assign_addrs: aa5500ff(%02x)\n", port->name, s);
 		return 0;
 	}
 
@@ -467,8 +456,7 @@ static int assign_addrs(struct parport *port)
 					  | PARPORT_STATUS_SELECT
 					  | PARPORT_STATUS_ERROR);
 	if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
-		DPRINTK(KERN_DEBUG "%s: assign_addrs: aa5500ff87(%02x)\n",
-			 port->name, s);
+		pr_debug("%s: assign_addrs: aa5500ff87(%02x)\n", port->name, s);
 		return 0;
 	}
 
@@ -505,8 +493,7 @@ static int assign_addrs(struct parport *port)
 
 	parport_write_data(port, 0xff); udelay(2);
 	detected = numdevs - thisdev;
-	DPRINTK(KERN_DEBUG "%s: Found %d daisy-chained devices\n", port->name,
-		 detected);
+	pr_debug("%s: Found %d daisy-chained devices\n", port->name, detected);
 
 	/* Ask the new devices to introduce themselves. */
 	deviceid = kmalloc(1024, GFP_KERNEL);
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index 90fb73575495..f28d6a3c5a68 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -31,12 +31,6 @@
 #undef DEBUG /* Don't want a garbled console */
 #endif
 
-#ifdef DEBUG
-#define DPRINTK(stuff...) printk (stuff)
-#else
-#define DPRINTK(stuff...)
-#endif
-
 /* Make parport_wait_peripheral wake up.
  * It will be useful to call this from an interrupt handler. */
 static void parport_ieee1284_wakeup (struct parport *port)
@@ -258,12 +252,11 @@ static void parport_ieee1284_terminate (struct parport *port)
 						     PARPORT_STATUS_PAPEROUT,
 						     PARPORT_STATUS_PAPEROUT);
 			if (r)
-				DPRINTK (KERN_INFO "%s: Timeout at event 49\n",
+				pr_debug("%s: Timeout at event 49\n",
 					 port->name);
 
 			parport_data_forward (port);
-			DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
-				 port->name);
+			pr_debug("%s: ECP direction: forward\n", port->name);
 			port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
 		}
 
@@ -281,8 +274,7 @@ static void parport_ieee1284_terminate (struct parport *port)
 		/* Event 24: nAck goes low */
 		r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
 		if (r)
-			DPRINTK (KERN_INFO "%s: Timeout at event 24\n",
-				 port->name);
+			pr_debug("%s: Timeout at event 24\n", port->name);
 
 		/* Event 25: Set nAutoFd low */
 		parport_frob_control (port,
@@ -294,8 +286,7 @@ static void parport_ieee1284_terminate (struct parport *port)
 					     PARPORT_STATUS_ACK, 
 					     PARPORT_STATUS_ACK);
 		if (r)
-			DPRINTK (KERN_INFO "%s: Timeout at event 27\n",
-				 port->name);
+			pr_debug("%s: Timeout at event 27\n", port->name);
 
 		/* Event 29: Set nAutoFd high */
 		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
@@ -304,8 +295,7 @@ static void parport_ieee1284_terminate (struct parport *port)
 	port->ieee1284.mode = IEEE1284_MODE_COMPAT;
 	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
 
-	DPRINTK (KERN_DEBUG "%s: In compatibility (forward idle) mode\n",
-		 port->name);
+	pr_debug("%s: In compatibility (forward idle) mode\n", port->name);
 }		
 #endif /* IEEE1284 support */
 
@@ -329,7 +319,7 @@ int parport_negotiate (struct parport *port, int mode)
 #ifndef CONFIG_PARPORT_1284
 	if (mode == IEEE1284_MODE_COMPAT)
 		return 0;
-	printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+	pr_err("parport: IEEE1284 not supported in this kernel\n");
 	return -1;
 #else
 	int m = mode & ~IEEE1284_ADDR;
@@ -406,8 +396,7 @@ int parport_negotiate (struct parport *port, int mode)
 				      PARPORT_CONTROL_SELECT
 				      | PARPORT_CONTROL_AUTOFD,
 				      PARPORT_CONTROL_SELECT);
-		DPRINTK (KERN_DEBUG
-			 "%s: Peripheral not IEEE1284 compliant (0x%02X)\n",
+		pr_debug("%s: Peripheral not IEEE1284 compliant (0x%02X)\n",
 			 port->name, parport_read_status (port));
 		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
 		return -1; /* Not IEEE1284 compliant */
@@ -430,8 +419,7 @@ int parport_negotiate (struct parport *port, int mode)
 				     PARPORT_STATUS_ACK,
 				     PARPORT_STATUS_ACK)) {
 		/* This shouldn't really happen with a compliant device. */
-		DPRINTK (KERN_DEBUG
-			 "%s: Mode 0x%02x not supported? (0x%02x)\n",
+		pr_debug("%s: Mode 0x%02x not supported? (0x%02x)\n",
 			 port->name, mode, port->ops->read_status (port));
 		parport_ieee1284_terminate (port);
 		return 1;
@@ -442,7 +430,7 @@ int parport_negotiate (struct parport *port, int mode)
 	/* xflag should be high for all modes other than nibble (0). */
 	if (mode && !xflag) {
 		/* Mode not supported. */
-		DPRINTK (KERN_DEBUG "%s: Mode 0x%02x rejected by peripheral\n",
+		pr_debug("%s: Mode 0x%02x rejected by peripheral\n",
 			 port->name, mode);
 		parport_ieee1284_terminate (port);
 		return 1;
@@ -463,9 +451,7 @@ int parport_negotiate (struct parport *port, int mode)
 		/* Event 52: nAck goes low */
 		if (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
 			/* This peripheral is _very_ slow. */
-			DPRINTK (KERN_DEBUG
-				 "%s: Event 52 didn't happen\n",
-				 port->name);
+			pr_debug("%s: Event 52 didn't happen\n", port->name);
 			parport_ieee1284_terminate (port);
 			return 1;
 		}
@@ -481,10 +467,9 @@ int parport_negotiate (struct parport *port, int mode)
 					     PARPORT_STATUS_ACK)) {
 			/* This shouldn't really happen with a compliant
 			 * device. */
-			DPRINTK (KERN_DEBUG
-				 "%s: Mode 0x%02x not supported? (0x%02x)\n",
+			pr_debug("%s: Mode 0x%02x not supported? (0x%02x)\n",
 				 port->name, mode,
-				 port->ops->read_status (port));
+				 port->ops->read_status(port));
 			parport_ieee1284_terminate (port);
 			return 1;
 		}
@@ -495,8 +480,8 @@ int parport_negotiate (struct parport *port, int mode)
 		/* xflag should be high. */
 		if (!xflag) {
 			/* Extended mode not supported. */
-			DPRINTK (KERN_DEBUG "%s: Extended mode 0x%02x not "
-				 "supported\n", port->name, mode);
+			pr_debug("%s: Extended mode 0x%02x not supported\n",
+				 port->name, mode);
 			parport_ieee1284_terminate (port);
 			return 1;
 		}
@@ -505,7 +490,7 @@ int parport_negotiate (struct parport *port, int mode)
 	}
 
 	/* Mode is supported */
-	DPRINTK (KERN_DEBUG "%s: In mode 0x%02x\n", port->name, mode);
+	pr_debug("%s: In mode 0x%02x\n", port->name, mode);
 	port->ieee1284.mode = mode;
 
 	/* But ECP is special */
@@ -522,13 +507,11 @@ int parport_negotiate (struct parport *port, int mode)
 					     PARPORT_STATUS_PAPEROUT,
 					     PARPORT_STATUS_PAPEROUT);
 		if (r) {
-			DPRINTK (KERN_INFO "%s: Timeout at event 31\n",
-				port->name);
+			pr_debug("%s: Timeout at event 31\n", port->name);
 		}
 
 		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
-		DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
-			 port->name);
+		pr_debug("%s: ECP direction: forward\n", port->name);
 	} else switch (mode) {
 	case IEEE1284_MODE_NIBBLE:
 	case IEEE1284_MODE_BYTE:
@@ -573,7 +556,7 @@ void parport_ieee1284_interrupt (void *handle)
 	if (port->ieee1284.phase == IEEE1284_PH_REV_IDLE) {
 		/* An interrupt in this phase means that data
 		 * is now available. */
-		DPRINTK (KERN_DEBUG "%s: Data available\n", port->name);
+		pr_debug("%s: Data available\n", port->name);
 		parport_ieee1284_ack_data_avail (port);
 	}
 #endif /* IEEE1284 support */
@@ -617,13 +600,12 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
 		parport_negotiate (port, IEEE1284_MODE_COMPAT);
 		/* fall through */
 	case IEEE1284_MODE_COMPAT:
-		DPRINTK (KERN_DEBUG "%s: Using compatibility mode\n",
-			 port->name);
+		pr_debug("%s: Using compatibility mode\n", port->name);
 		fn = port->ops->compat_write_data;
 		break;
 
 	case IEEE1284_MODE_EPP:
-		DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+		pr_debug("%s: Using EPP mode\n", port->name);
 		if (addr) {
 			fn = port->ops->epp_write_addr;
 		} else {
@@ -631,8 +613,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
 		}
 		break;
 	case IEEE1284_MODE_EPPSWE:
-		DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
-			port->name);
+		pr_debug("%s: Using software-emulated EPP mode\n", port->name);
 		if (addr) {
 			fn = parport_ieee1284_epp_write_addr;
 		} else {
@@ -641,7 +622,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
 		break;
 	case IEEE1284_MODE_ECP:
 	case IEEE1284_MODE_ECPRLE:
-		DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+		pr_debug("%s: Using ECP mode\n", port->name);
 		if (addr) {
 			fn = port->ops->ecp_write_addr;
 		} else {
@@ -650,8 +631,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
 		break;
 
 	case IEEE1284_MODE_ECPSWE:
-		DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
-			 port->name);
+		pr_debug("%s: Using software-emulated ECP mode\n", port->name);
 		/* The caller has specified that it must be emulated,
 		 * even if we have ECP hardware! */
 		if (addr) {
@@ -662,13 +642,13 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
 		break;
 
 	default:
-		DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
-			port->ieee1284.mode);
+		pr_debug("%s: Unknown mode 0x%02x\n",
+			 port->name, port->ieee1284.mode);
 		return -ENOSYS;
 	}
 
 	retval = (*fn) (port, buffer, len, 0);
-	DPRINTK (KERN_DEBUG "%s: wrote %d/%d bytes\n", port->name, retval, len);
+	pr_debug("%s: wrote %zd/%zu bytes\n", port->name, retval, len);
 	return retval;
 #endif /* IEEE1284 support */
 }
@@ -694,7 +674,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
 ssize_t parport_read (struct parport *port, void *buffer, size_t len)
 {
 #ifndef CONFIG_PARPORT_1284
-	printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+	pr_err("parport: IEEE1284 not supported in this kernel\n");
 	return -ENODEV;
 #else
 	int mode = port->physport->ieee1284.mode;
@@ -715,7 +695,7 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
 		if ((port->physport->modes & PARPORT_MODE_TRISTATE) &&
 		    !parport_negotiate (port, IEEE1284_MODE_BYTE)) {
 			/* got into BYTE mode OK */
-			DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+			pr_debug("%s: Using byte mode\n", port->name);
 			fn = port->ops->byte_read_data;
 			break;
 		}
@@ -724,17 +704,17 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
 		}
 		/* fall through - to NIBBLE */
 	case IEEE1284_MODE_NIBBLE:
-		DPRINTK (KERN_DEBUG "%s: Using nibble mode\n", port->name);
+		pr_debug("%s: Using nibble mode\n", port->name);
 		fn = port->ops->nibble_read_data;
 		break;
 
 	case IEEE1284_MODE_BYTE:
-		DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+		pr_debug("%s: Using byte mode\n", port->name);
 		fn = port->ops->byte_read_data;
 		break;
 
 	case IEEE1284_MODE_EPP:
-		DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+		pr_debug("%s: Using EPP mode\n", port->name);
 		if (addr) {
 			fn = port->ops->epp_read_addr;
 		} else {
@@ -742,8 +722,7 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
 		}
 		break;
 	case IEEE1284_MODE_EPPSWE:
-		DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
-			port->name);
+		pr_debug("%s: Using software-emulated EPP mode\n", port->name);
 		if (addr) {
 			fn = parport_ieee1284_epp_read_addr;
 		} else {
@@ -752,19 +731,18 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
 		break;
 	case IEEE1284_MODE_ECP:
 	case IEEE1284_MODE_ECPRLE:
-		DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+		pr_debug("%s: Using ECP mode\n", port->name);
 		fn = port->ops->ecp_read_data;
 		break;
 
 	case IEEE1284_MODE_ECPSWE:
-		DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
-			 port->name);
+		pr_debug("%s: Using software-emulated ECP mode\n", port->name);
 		fn = parport_ieee1284_ecp_read_data;
 		break;
 
 	default:
-		DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
-			 port->physport->ieee1284.mode);
+		pr_debug("%s: Unknown mode 0x%02x\n",
+			 port->name, port->physport->ieee1284.mode);
 		return -ENOSYS;
 	}
 
diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
index 5d41dda6da4e..2c11bd3fe1fd 100644
--- a/drivers/parport/ieee1284_ops.c
+++ b/drivers/parport/ieee1284_ops.c
@@ -27,12 +27,6 @@
 #undef DEBUG /* Don't want a garbled console */
 #endif
 
-#ifdef DEBUG
-#define DPRINTK(stuff...) printk (stuff)
-#else
-#define DPRINTK(stuff...)
-#endif
-
 /***                                *
  * One-way data transfer functions. *
  *                                ***/
@@ -115,7 +109,7 @@ size_t parport_ieee1284_write_compat (struct parport *port,
 		if (signal_pending (current))
 			break;
 
-		DPRINTK (KERN_DEBUG "%s: Timed out\n", port->name);
+		pr_debug("%s: Timed out\n", port->name);
 		break;
 
 	ready:
@@ -178,9 +172,8 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
 		if (parport_wait_peripheral (port,
 					     PARPORT_STATUS_ACK, 0)) {
 			/* Timeout -- no more data? */
-			DPRINTK (KERN_DEBUG
-				 "%s: Nibble timeout at event 9 (%d bytes)\n",
-				 port->name, i/2);
+			pr_debug("%s: Nibble timeout at event 9 (%d bytes)\n",
+				 port->name, i / 2);
 			parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
 			break;
 		}
@@ -201,8 +194,7 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
 					     PARPORT_STATUS_ACK,
 					     PARPORT_STATUS_ACK)) {
 			/* Timeout -- no more data? */
-			DPRINTK (KERN_DEBUG
-				 "%s: Nibble timeout at event 11\n",
+			pr_debug("%s: Nibble timeout at event 11\n",
 				 port->name);
 			break;
 		}
@@ -219,9 +211,8 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
 		/* Read the last nibble without checking data avail. */
 		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
 		end_of_data:
-			DPRINTK (KERN_DEBUG
-				"%s: No more nibble data (%d bytes)\n",
-				port->name, i/2);
+			pr_debug("%s: No more nibble data (%d bytes)\n",
+				 port->name, i / 2);
 
 			/* Go to reverse idle phase. */
 			parport_frob_control (port,
@@ -272,8 +263,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
 			/* Timeout -- no more data? */
 			parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
 						 0);
-			DPRINTK (KERN_DEBUG "%s: Byte timeout at event 9\n",
-				 port->name);
+			pr_debug("%s: Byte timeout at event 9\n", port->name);
 			break;
 		}
 
@@ -288,8 +278,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
 					     PARPORT_STATUS_ACK,
 					     PARPORT_STATUS_ACK)) {
 			/* Timeout -- no more data? */
-			DPRINTK (KERN_DEBUG "%s: Byte timeout at event 11\n",
-				 port->name);
+			pr_debug("%s: Byte timeout at event 11\n", port->name);
 			break;
 		}
 
@@ -307,8 +296,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
 		/* Read the last byte without checking data avail. */
 		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
 		end_of_data:
-			DPRINTK (KERN_DEBUG
-				 "%s: No more byte data (%zd bytes)\n",
+			pr_debug("%s: No more byte data (%zd bytes)\n",
 				 port->name, count);
 
 			/* Go to reverse idle phase. */
@@ -353,12 +341,10 @@ int ecp_forward_to_reverse (struct parport *port)
 					  PARPORT_STATUS_PAPEROUT, 0);
 
 	if (!retval) {
-		DPRINTK (KERN_DEBUG "%s: ECP direction: reverse\n",
-			 port->name);
+		pr_debug("%s: ECP direction: reverse\n", port->name);
 		port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
 	} else {
-		DPRINTK (KERN_DEBUG "%s: ECP direction: failed to reverse\n",
-			 port->name);
+		pr_debug("%s: ECP direction: failed to reverse\n", port->name);
 		port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
 	}
 
@@ -384,12 +370,10 @@ int ecp_reverse_to_forward (struct parport *port)
 
 	if (!retval) {
 		parport_data_forward (port);
-		DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
-			 port->name);
+		pr_debug("%s: ECP direction: forward\n", port->name);
 		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
 	} else {
-		DPRINTK (KERN_DEBUG
-			 "%s: ECP direction: failed to switch forward\n",
+		pr_debug("%s: ECP direction: failed to switch forward\n",
 			 port->name);
 		port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
 	}
@@ -450,7 +434,7 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
 		}
 
 		/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
-		DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+		pr_debug("%s: ECP transfer stalled!\n", port->name);
 
 		parport_frob_control (port, PARPORT_CONTROL_INIT,
 				      PARPORT_CONTROL_INIT);
@@ -466,8 +450,7 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
 		if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
 			break;
 
-		DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
-			 port->name);
+		pr_debug("%s: Host transfer recovered\n", port->name);
 
 		if (time_after_eq (jiffies, expire)) break;
 		goto try_again;
@@ -565,23 +548,20 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
                    command or a normal data byte, don't accept it. */
 		if (command) {
 			if (byte & 0x80) {
-				DPRINTK (KERN_DEBUG "%s: stopping short at "
-					 "channel command (%02x)\n",
+				pr_debug("%s: stopping short at channel command (%02x)\n",
 					 port->name, byte);
 				goto out;
 			}
 			else if (port->ieee1284.mode != IEEE1284_MODE_ECPRLE)
-				DPRINTK (KERN_DEBUG "%s: device illegally "
-					 "using RLE; accepting anyway\n",
+				pr_debug("%s: device illegally using RLE; accepting anyway\n",
 					 port->name);
 
 			rle_count = byte + 1;
 
 			/* Are we allowed to read that many bytes? */
 			if (rle_count > (len - count)) {
-				DPRINTK (KERN_DEBUG "%s: leaving %d RLE bytes "
-					 "for next time\n", port->name,
-					 rle_count);
+				pr_debug("%s: leaving %d RLE bytes for next time\n",
+					 port->name, rle_count);
 				break;
 			}
 
@@ -596,11 +576,10 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
 					     PARPORT_STATUS_ACK)) {
 			/* It's gone wrong.  Return what data we have
                            to the caller. */
-			DPRINTK (KERN_DEBUG "ECP read timed out at 45\n");
+			pr_debug("ECP read timed out at 45\n");
 
 			if (command)
-				printk (KERN_WARNING
-					"%s: command ignored (%02x)\n",
+				pr_warn("%s: command ignored (%02x)\n",
 					port->name, byte);
 
 			break;
@@ -620,7 +599,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
 			memset (buf, byte, rle_count);
 			buf += rle_count;
 			count += rle_count;
-			DPRINTK (KERN_DEBUG "%s: decompressed to %d bytes\n",
+			pr_debug("%s: decompressed to %d bytes\n",
 				 port->name, rle_count);
 		} else {
 			/* Normal data byte. */
@@ -686,7 +665,7 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
 		}
 
 		/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
-		DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+		pr_debug("%s: ECP transfer stalled!\n", port->name);
 
 		parport_frob_control (port, PARPORT_CONTROL_INIT,
 				      PARPORT_CONTROL_INIT);
@@ -702,8 +681,7 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
 		if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
 			break;
 
-		DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
-			 port->name);
+		pr_debug("%s: Host transfer recovered\n", port->name);
 
 		if (time_after_eq (jiffies, expire)) break;
 		goto try_again;
diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c
index 3301861f69fa..1e88bcfe0d7b 100644
--- a/drivers/parport/parport_amiga.c
+++ b/drivers/parport/parport_amiga.c
@@ -28,16 +28,10 @@
 #include <asm/amigaints.h>
 
 #undef DEBUG
-#ifdef DEBUG
-#define DPRINTK printk
-#else
-#define DPRINTK(x...)	do { } while (0)
-#endif
-
 
 static void amiga_write_data(struct parport *p, unsigned char data)
 {
-	DPRINTK(KERN_DEBUG "write_data %c\n",data);
+	pr_debug("write_data %c\n", data);
 	/* Triggers also /STROBE. This behavior cannot be changed */
 	ciaa.prb = data;
 	mb();
@@ -59,13 +53,13 @@ static unsigned char control_amiga_to_pc(unsigned char control)
 
 static void amiga_write_control(struct parport *p, unsigned char control)
 {
-	DPRINTK(KERN_DEBUG "write_control %02x\n",control);
+	pr_debug("write_control %02x\n", control);
 	/* No implementation possible */
 }
 	
 static unsigned char amiga_read_control( struct parport *p)
 {
-	DPRINTK(KERN_DEBUG "read_control \n");
+	pr_debug("read_control\n");
 	return control_amiga_to_pc(0);
 }
 
@@ -73,7 +67,7 @@ static unsigned char amiga_frob_control( struct parport *p, unsigned char mask,
 {
 	unsigned char old;
 
-	DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
+	pr_debug("frob_control mask %02x, value %02x\n", mask, val);
 	old = amiga_read_control(p);
 	amiga_write_control(p, (old & ~mask) ^ val);
 	return old;
@@ -99,7 +93,7 @@ static unsigned char amiga_read_status(struct parport *p)
 	unsigned char status;
 
 	status = status_amiga_to_pc(ciab.pra & 7);
-	DPRINTK(KERN_DEBUG "read_status %02x\n", status);
+	pr_debug("read_status %02x\n", status);
 	return status;
 }
 
@@ -115,14 +109,14 @@ static void amiga_disable_irq(struct parport *p)
 
 static void amiga_data_forward(struct parport *p)
 {
-	DPRINTK(KERN_DEBUG "forward\n");
+	pr_debug("forward\n");
 	ciaa.ddrb = 0xff; /* all pins output */
 	mb();
 }
 
 static void amiga_data_reverse(struct parport *p)
 {
-	DPRINTK(KERN_DEBUG "reverse\n");
+	pr_debug("reverse\n");
 	ciaa.ddrb = 0; /* all pins input */
 	mb();
 }
@@ -212,7 +206,7 @@ static int __init amiga_parallel_probe(struct platform_device *pdev)
 	if (err)
 		goto out_irq;
 
-	printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
+	pr_info("%s: Amiga built-in port using irq\n", p->name);
 	/* XXX: set operating mode */
 	parport_announce_port(p);
 
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
index f8dd368bfdbb..2ff0fe053e6e 100644
--- a/drivers/parport/parport_atari.c
+++ b/drivers/parport/parport_atari.c
@@ -200,7 +200,7 @@ static int __init parport_atari_init(void)
 		}
 
 		this_port = p;
-		printk(KERN_INFO "%s: Atari built-in port using irq\n", p->name);
+		pr_info("%s: Atari built-in port using irq\n", p->name);
 		parport_announce_port (p);
 
 		return 0;
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index e77044c2bf62..8e7e3ac4bb87 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -142,10 +142,8 @@ static int parport_config(struct pcmcia_device *link)
 			      link->irq, PARPORT_DMA_NONE,
 			      &link->dev, IRQF_SHARED);
     if (p == NULL) {
-	printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
-	       "0x%3x, irq %u failed\n",
-	       (unsigned int) link->resource[0]->start,
-	       link->irq);
+	    pr_notice("parport_cs: parport_pc_probe_port() at 0x%3x, irq %u failed\n",
+		      (unsigned int)link->resource[0]->start, link->irq);
 	goto failed;
     }
 
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 922535a118ba..9228e8f90309 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -238,14 +238,14 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 
 	priv = kzalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
 	if (!priv) {
-		printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
+		printk(KERN_DEBUG "parport (0x%lx): no memory!\n", base);
 		return NULL;
 	}
 	ops = kmemdup(&parport_gsc_ops, sizeof(struct parport_operations),
 		      GFP_KERNEL);
 	if (!ops) {
-		printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
-			base);
+		printk(KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
+		       base);
 		kfree (priv);
 		return NULL;
 	}
@@ -282,7 +282,7 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 	p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
 	p->private_data = priv;
 
-	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+	pr_info("%s: PC-style at 0x%lx", p->name, p->base);
 	p->irq = irq;
 	if (p->irq == PARPORT_IRQ_AUTO) {
 		p->irq = PARPORT_IRQ_NONE;
@@ -299,12 +299,16 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 		p->dma = PARPORT_DMA_NONE;
 
 	pr_cont(" [");
-#define printmode(x) {if(p->modes&PARPORT_MODE_##x){pr_cont("%s%s",f?",":"",#x);f++;}}
+#define printmode(x)							\
+do {									\
+	if (p->modes & PARPORT_MODE_##x)				\
+		pr_cont("%s%s", f++ ? "," : "", #x);			\
+} while (0)
 	{
 		int f = 0;
 		printmode(PCSPP);
 		printmode(TRISTATE);
-		printmode(COMPAT)
+		printmode(COMPAT);
 		printmode(EPP);
 //		printmode(ECP);
 //		printmode(DMA);
@@ -315,8 +319,7 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 	if (p->irq != PARPORT_IRQ_NONE) {
 		if (request_irq (p->irq, parport_irq_handler,
 				 0, p->name, p)) {
-			printk (KERN_WARNING "%s: irq %d in use, "
-				"resorting to polled operation\n",
+			pr_warn("%s: irq %d in use, resorting to polled operation\n",
 				p->name, p->irq);
 			p->irq = PARPORT_IRQ_NONE;
 			p->dma = PARPORT_DMA_NONE;
@@ -347,7 +350,7 @@ static int __init parport_init_chip(struct parisc_device *dev)
 	unsigned long port;
 
 	if (!dev->irq) {
-		printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+		pr_warn("IRQ not found for parallel device at 0x%llx\n",
 			(unsigned long long)dev->hpa.start);
 		return -ENODEV;
 	}
@@ -360,11 +363,11 @@ static int __init parport_init_chip(struct parisc_device *dev)
 	if (boot_cpu_data.cpu_type > pcxt && !pdc_add_valid(port+4)) {
 
 		/* Initialize bidirectional-mode (0x10) & data-tranfer-mode #1 (0x20) */
-		printk("%s: initialize bidirectional-mode.\n", __func__);
+		pr_info("%s: initialize bidirectional-mode\n", __func__);
 		parport_writeb ( (0x10 + 0x20), port + 4);
 
 	} else {
-		printk("%s: enhanced parport-modes not supported.\n", __func__);
+		pr_info("%s: enhanced parport-modes not supported\n", __func__);
 	}
 	
 	p = parport_gsc_probe_port(port, 0, dev->irq,
diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h
index 4c4d3c6cd77e..9301217edf12 100644
--- a/drivers/parport/parport_gsc.h
+++ b/drivers/parport/parport_gsc.h
@@ -71,7 +71,7 @@ struct parport_gsc_private {
 static inline void parport_gsc_write_data(struct parport *p, unsigned char d)
 {
 #ifdef DEBUG_PARPORT
-	printk (KERN_DEBUG "parport_gsc_write_data(%p,0x%02x)\n", p, d);
+	printk(KERN_DEBUG "%s(%p,0x%02x)\n", __func__, p, d);
 #endif
 	parport_writeb(d, DATA(p));
 }
@@ -80,8 +80,7 @@ static inline unsigned char parport_gsc_read_data(struct parport *p)
 {
 	unsigned char val = parport_readb (DATA (p));
 #ifdef DEBUG_PARPORT
-	printk (KERN_DEBUG "parport_gsc_read_data(%p) = 0x%02x\n",
-		p, val);
+	printk(KERN_DEBUG "%s(%p) = 0x%02x\n", __func__, p, val);
 #endif
 	return val;
 }
@@ -95,9 +94,9 @@ static inline unsigned char __parport_gsc_frob_control(struct parport *p,
 	struct parport_gsc_private *priv = p->physport->private_data;
 	unsigned char ctr = priv->ctr;
 #ifdef DEBUG_PARPORT
-	printk (KERN_DEBUG
-		"__parport_gsc_frob_control(%02x,%02x): %02x -> %02x\n",
-		mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
+	printk(KERN_DEBUG "%s(%02x,%02x): %02x -> %02x\n",
+	       __func__, mask, val,
+	       ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
 #endif
 	ctr = (ctr & ~mask) ^ val;
 	ctr &= priv->ctr_writable; /* only write writable bits. */
@@ -126,8 +125,8 @@ static inline void parport_gsc_write_control(struct parport *p,
 
 	/* Take this out when drivers have adapted to newer interface. */
 	if (d & 0x20) {
-		printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
-			p->name, p->cad->name);
+		printk(KERN_DEBUG "%s (%s): use data_reverse for this!\n",
+		       p->name, p->cad->name);
 		parport_gsc_data_reverse (p);
 	}
 
@@ -155,9 +154,9 @@ static inline unsigned char parport_gsc_frob_control(struct parport *p,
 
 	/* Take this out when drivers have adapted to newer interface. */
 	if (mask & 0x20) {
-		printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
-			p->name, p->cad->name,
-			(val & 0x20) ? "reverse" : "forward");
+		printk(KERN_DEBUG "%s (%s): use data_%s for this!\n",
+		       p->name, p->cad->name,
+		       (val & 0x20) ? "reverse" : "forward");
 		if (val & 0x20)
 			parport_gsc_data_reverse (p);
 		else
diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c
index ab215b650f41..48b084e86dc6 100644
--- a/drivers/parport/parport_ip32.c
+++ b/drivers/parport/parport_ip32.c
@@ -328,19 +328,19 @@ static void parport_ip32_dump_state(struct parport *p, char *str,
 						     "TST", "CFG"};
 		unsigned int ecr = readb(priv->regs.ecr);
 		printk(KERN_DEBUG PPIP32 "    ecr=0x%02x", ecr);
-		printk(" %s",
-		       ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]);
+		pr_cont(" %s",
+			ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]);
 		if (ecr & ECR_nERRINTR)
-			printk(",nErrIntrEn");
+			pr_cont(",nErrIntrEn");
 		if (ecr & ECR_DMAEN)
-			printk(",dmaEn");
+			pr_cont(",dmaEn");
 		if (ecr & ECR_SERVINTR)
-			printk(",serviceIntr");
+			pr_cont(",serviceIntr");
 		if (ecr & ECR_F_FULL)
-			printk(",f_full");
+			pr_cont(",f_full");
 		if (ecr & ECR_F_EMPTY)
-			printk(",f_empty");
-		printk("\n");
+			pr_cont(",f_empty");
+		pr_cont("\n");
 	}
 	if (show_ecp_config) {
 		unsigned int oecr, cnfgA, cnfgB;
@@ -352,52 +352,53 @@ static void parport_ip32_dump_state(struct parport *p, char *str,
 		writeb(ECR_MODE_PS2, priv->regs.ecr);
 		writeb(oecr, priv->regs.ecr);
 		printk(KERN_DEBUG PPIP32 "    cnfgA=0x%02x", cnfgA);
-		printk(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses");
+		pr_cont(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses");
 		switch (cnfgA & CNFGA_ID_MASK) {
 		case CNFGA_ID_8:
-			printk(",8 bits");
+			pr_cont(",8 bits");
 			break;
 		case CNFGA_ID_16:
-			printk(",16 bits");
+			pr_cont(",16 bits");
 			break;
 		case CNFGA_ID_32:
-			printk(",32 bits");
+			pr_cont(",32 bits");
 			break;
 		default:
-			printk(",unknown ID");
+			pr_cont(",unknown ID");
 			break;
 		}
 		if (!(cnfgA & CNFGA_nBYTEINTRANS))
-			printk(",ByteInTrans");
+			pr_cont(",ByteInTrans");
 		if ((cnfgA & CNFGA_ID_MASK) != CNFGA_ID_8)
-			printk(",%d byte%s left", cnfgA & CNFGA_PWORDLEFT,
-			       ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : "");
-		printk("\n");
+			pr_cont(",%d byte%s left",
+				cnfgA & CNFGA_PWORDLEFT,
+				((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : "");
+		pr_cont("\n");
 		printk(KERN_DEBUG PPIP32 "    cnfgB=0x%02x", cnfgB);
-		printk(" irq=%u,dma=%u",
-		       (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT,
-		       (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT);
-		printk(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL));
+		pr_cont(" irq=%u,dma=%u",
+			(cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT,
+			(cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT);
+		pr_cont(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL));
 		if (cnfgB & CNFGB_COMPRESS)
-			printk(",compress");
-		printk("\n");
+			pr_cont(",compress");
+		pr_cont("\n");
 	}
 	for (i = 0; i < 2; i++) {
 		unsigned int dcr = i ? priv->dcr_cache : readb(priv->regs.dcr);
 		printk(KERN_DEBUG PPIP32 "    dcr(%s)=0x%02x",
 		       i ? "soft" : "hard", dcr);
-		printk(" %s", (dcr & DCR_DIR) ? "rev" : "fwd");
+		pr_cont(" %s", (dcr & DCR_DIR) ? "rev" : "fwd");
 		if (dcr & DCR_IRQ)
-			printk(",ackIntEn");
+			pr_cont(",ackIntEn");
 		if (!(dcr & DCR_SELECT))
-			printk(",nSelectIn");
+			pr_cont(",nSelectIn");
 		if (dcr & DCR_nINIT)
-			printk(",nInit");
+			pr_cont(",nInit");
 		if (!(dcr & DCR_AUTOFD))
-			printk(",nAutoFD");
+			pr_cont(",nAutoFD");
 		if (!(dcr & DCR_STROBE))
-			printk(",nStrobe");
-		printk("\n");
+			pr_cont(",nStrobe");
+		pr_cont("\n");
 	}
 #define sep (f++ ? ',' : ' ')
 	{
@@ -405,20 +406,20 @@ static void parport_ip32_dump_state(struct parport *p, char *str,
 		unsigned int dsr = readb(priv->regs.dsr);
 		printk(KERN_DEBUG PPIP32 "    dsr=0x%02x", dsr);
 		if (!(dsr & DSR_nBUSY))
-			printk("%cBusy", sep);
+			pr_cont("%cBusy", sep);
 		if (dsr & DSR_nACK)
-			printk("%cnAck", sep);
+			pr_cont("%cnAck", sep);
 		if (dsr & DSR_PERROR)
-			printk("%cPError", sep);
+			pr_cont("%cPError", sep);
 		if (dsr & DSR_SELECT)
-			printk("%cSelect", sep);
+			pr_cont("%cSelect", sep);
 		if (dsr & DSR_nFAULT)
-			printk("%cnFault", sep);
+			pr_cont("%cnFault", sep);
 		if (!(dsr & DSR_nPRINT))
-			printk("%c(Print)", sep);
+			pr_cont("%c(Print)", sep);
 		if (dsr & DSR_TIMEOUT)
-			printk("%cTimeout", sep);
-		printk("\n");
+			pr_cont("%cTimeout", sep);
+		pr_cont("\n");
 	}
 #undef sep
 }
@@ -1337,9 +1338,8 @@ static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p)
 			ecr = parport_ip32_read_econtrol(p);
 			if ((ecr & ECR_F_EMPTY) && !(ecr & ECR_SERVINTR)
 			    && !lost_interrupt) {
-				printk(KERN_WARNING PPIP32
-				       "%s: lost interrupt in %s\n",
-				       p->name, __func__);
+				pr_warn(PPIP32 "%s: lost interrupt in %s\n",
+					p->name, __func__);
 				lost_interrupt = 1;
 			}
 		}
@@ -1643,8 +1643,8 @@ static size_t parport_ip32_compat_write_data(struct parport *p,
 				       DSR_nBUSY | DSR_nFAULT)) {
 		/* Avoid to flood the logs */
 		if (ready_before)
-			printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
-			       p->name, __func__);
+			pr_info(PPIP32 "%s: not ready in %s\n",
+				p->name, __func__);
 		ready_before = 0;
 		goto stop;
 	}
@@ -1704,7 +1704,7 @@ static size_t parport_ip32_ecp_write_data(struct parport *p,
 
 		/* Event 49: PError goes high. */
 		if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR)) {
-			printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s",
+			printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s\n",
 			       p->name, __func__);
 			physport->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
 			return 0;
@@ -1724,8 +1724,8 @@ static size_t parport_ip32_ecp_write_data(struct parport *p,
 				       DSR_nBUSY | DSR_nFAULT)) {
 		/* Avoid to flood the logs */
 		if (ready_before)
-			printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
-			       p->name, __func__);
+			pr_info(PPIP32 "%s: not ready in %s\n",
+				p->name, __func__);
 		ready_before = 0;
 		goto stop;
 	}
@@ -2064,8 +2064,7 @@ static __init struct parport *parport_ip32_probe_port(void)
 	p->modes |= PARPORT_MODE_TRISTATE;
 
 	if (!parport_ip32_fifo_supported(p)) {
-		printk(KERN_WARNING PPIP32
-		       "%s: error: FIFO disabled\n", p->name);
+		pr_warn(PPIP32 "%s: error: FIFO disabled\n", p->name);
 		/* Disable hardware modes depending on a working FIFO. */
 		features &= ~PARPORT_IP32_ENABLE_SPP;
 		features &= ~PARPORT_IP32_ENABLE_ECP;
@@ -2077,8 +2076,7 @@ static __init struct parport *parport_ip32_probe_port(void)
 	if (features & PARPORT_IP32_ENABLE_IRQ) {
 		int irq = MACEISA_PARALLEL_IRQ;
 		if (request_irq(irq, parport_ip32_interrupt, 0, p->name, p)) {
-			printk(KERN_WARNING PPIP32
-			       "%s: error: IRQ disabled\n", p->name);
+			pr_warn(PPIP32 "%s: error: IRQ disabled\n", p->name);
 			/* DMA cannot work without interrupts. */
 			features &= ~PARPORT_IP32_ENABLE_DMA;
 		} else {
@@ -2091,8 +2089,7 @@ static __init struct parport *parport_ip32_probe_port(void)
 	/* Allocate DMA resources */
 	if (features & PARPORT_IP32_ENABLE_DMA) {
 		if (parport_ip32_dma_register())
-			printk(KERN_WARNING PPIP32
-			       "%s: error: DMA disabled\n", p->name);
+			pr_warn(PPIP32 "%s: error: DMA disabled\n", p->name);
 		else {
 			pr_probe(p, "DMA support enabled\n");
 			p->dma = 0; /* arbitrary value != PARPORT_DMA_NONE */
@@ -2134,13 +2131,15 @@ static __init struct parport *parport_ip32_probe_port(void)
 	parport_ip32_dump_state(p, "end init", 0);
 
 	/* Print out what we found */
-	printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)",
-	       p->name, p->base, p->base_hi);
+	pr_info("%s: SGI IP32 at 0x%lx (0x%lx)", p->name, p->base, p->base_hi);
 	if (p->irq != PARPORT_IRQ_NONE)
-		printk(", irq %d", p->irq);
-	printk(" [");
-#define printmode(x)	if (p->modes & PARPORT_MODE_##x)		\
-				printk("%s%s", f++ ? "," : "", #x)
+		pr_cont(", irq %d", p->irq);
+	pr_cont(" [");
+#define printmode(x)							\
+do {									\
+	if (p->modes & PARPORT_MODE_##x)				\
+		pr_cont("%s%s", f++ ? "," : "", #x);			\
+} while (0)
 	{
 		unsigned int f = 0;
 		printmode(PCSPP);
@@ -2151,7 +2150,7 @@ static __init struct parport *parport_ip32_probe_port(void)
 		printmode(DMA);
 	}
 #undef printmode
-	printk("]\n");
+	pr_cont("]\n");
 
 	parport_announce_port(p);
 	return p;
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index 9f87faf939e3..d6bbe8446301 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -70,11 +70,6 @@
 #define MAX_MFC 5
 
 #undef DEBUG
-#ifdef DEBUG
-#define DPRINTK printk
-#else
-static inline int DPRINTK(void *nothing, ...) {return 0;}
-#endif
 
 static struct parport *this_port[MAX_MFC] = {NULL, };
 static volatile int dummy; /* for trigger readds */
@@ -84,7 +79,7 @@ static struct parport_operations pp_mfc3_ops;
 
 static void mfc3_write_data(struct parport *p, unsigned char data)
 {
-DPRINTK(KERN_DEBUG "write_data %c\n",data);
+	pr_debug("write_data %c\n", data);
 
 	dummy = pia(p)->pprb; /* clears irq bit */
 	/* Triggers also /STROBE.*/
@@ -128,13 +123,13 @@ static unsigned char control_mfc3_to_pc(unsigned char control)
 
 static void mfc3_write_control(struct parport *p, unsigned char control)
 {
-DPRINTK(KERN_DEBUG "write_control %02x\n",control);
+	pr_debug("write_control %02x\n", control);
 	pia(p)->ppra = (pia(p)->ppra & 0x1f) | control_pc_to_mfc3(control);
 }
 	
 static unsigned char mfc3_read_control( struct parport *p)
 {
-DPRINTK(KERN_DEBUG "read_control \n");
+	pr_debug("read_control\n");
 	return control_mfc3_to_pc(pia(p)->ppra & 0xe0);
 }
 
@@ -142,7 +137,7 @@ static unsigned char mfc3_frob_control( struct parport *p, unsigned char mask, u
 {
 	unsigned char old;
 
-DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
+	pr_debug("frob_control mask %02x, value %02x\n", mask, val);
 	old = mfc3_read_control(p);
 	mfc3_write_control(p, (old & ~mask) ^ val);
 	return old;
@@ -171,7 +166,7 @@ static unsigned char mfc3_read_status(struct parport *p)
 	unsigned char status;
 
 	status = status_mfc3_to_pc(pia(p)->ppra & 0x1f);
-DPRINTK(KERN_DEBUG "read_status %02x\n", status);
+	pr_debug("read_status %02x\n", status);
 	return status;
 }
 
@@ -202,7 +197,7 @@ static void mfc3_disable_irq(struct parport *p)
 
 static void mfc3_data_forward(struct parport *p)
 {
-	DPRINTK(KERN_DEBUG "forward\n");
+	pr_debug("forward\n");
 	pia(p)->crb &= ~PIA_DDR; /* make data direction register visible */
 	pia(p)->pddrb = 255; /* all pins output */
 	pia(p)->crb |= PIA_DDR; /* make data register visible - default */
@@ -210,7 +205,7 @@ static void mfc3_data_forward(struct parport *p)
 
 static void mfc3_data_reverse(struct parport *p)
 {
-	DPRINTK(KERN_DEBUG "reverse\n");
+	pr_debug("reverse\n");
 	pia(p)->crb &= ~PIA_DDR; /* make data direction register visible */
 	pia(p)->pddrb = 0; /* all pins input */
 	pia(p)->crb |= PIA_DDR; /* make data register visible - default */
@@ -325,7 +320,7 @@ static int __init parport_mfc3_init(void)
 		p->dev = &z->dev;
 
 		this_port[pias++] = p;
-		printk(KERN_INFO "%s: Multiface III port using irq\n", p->name);
+		pr_info("%s: Multiface III port using irq\n", p->name);
 		/* XXX: set operating mode */
 
 		p->private_data = (void *)piabase;
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 1f17a39eabe8..77e37e3cb3a0 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -87,13 +87,6 @@
 
 #undef DEBUG
 
-#ifdef DEBUG
-#define DPRINTK  printk
-#else
-#define DPRINTK(stuff...)
-#endif
-
-
 #define NR_SUPERIOS 3
 static struct superio_struct {	/* For Super-IO chips autodetection */
 	int io;
@@ -118,8 +111,8 @@ static void frob_econtrol(struct parport *pb, unsigned char m,
 	if (m != 0xff)
 		ectr = inb(ECONTROL(pb));
 
-	DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
-		m, v, ectr, (ectr & ~m) ^ v);
+	pr_debug("frob_econtrol(%02x,%02x): %02x -> %02x\n",
+		 m, v, ectr, (ectr & ~m) ^ v);
 
 	outb((ectr & ~m) ^ v, ECONTROL(pb));
 }
@@ -142,7 +135,7 @@ static int change_mode(struct parport *p, int m)
 	unsigned char oecr;
 	int mode;
 
-	DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m);
+	pr_debug("parport change_mode ECP-ISA to mode 0x%02x\n", m);
 
 	if (!priv->ecr) {
 		printk(KERN_DEBUG "change_mode: but there's no ECR!\n");
@@ -298,8 +291,8 @@ static size_t parport_pc_epp_read_data(struct parport *port, void *buf,
 			status = inb(STATUS(port));
 			if (status & 0x01) {
 				/* EPP timeout should never occur... */
-				printk(KERN_DEBUG
-"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name);
+				printk(KERN_DEBUG "%s: EPP timeout occurred while talking to w91284pic (should not have done)\n",
+				       port->name);
 				clear_epp_timeout(port);
 			}
 		}
@@ -727,7 +720,7 @@ static size_t parport_pc_compat_write_block_pio(struct parport *port,
 	r = change_mode(port, ECR_PPF); /* Parallel port FIFO */
 	if (r)
 		printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n",
-								port->name);
+		       port->name);
 
 	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
 
@@ -770,9 +763,8 @@ static size_t parport_pc_compat_write_block_pio(struct parport *port,
 				     PARPORT_STATUS_BUSY,
 				     PARPORT_STATUS_BUSY);
 	if (r)
-		printk(KERN_DEBUG
-			"%s: BUSY timeout (%d) in compat_write_block_pio\n",
-			port->name, r);
+		printk(KERN_DEBUG "%s: BUSY timeout (%d) in compat_write_block_pio\n",
+		       port->name, r);
 
 	port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
 
@@ -810,8 +802,8 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
 					     PARPORT_STATUS_PAPEROUT,
 					     PARPORT_STATUS_PAPEROUT);
 		if (r) {
-			printk(KERN_DEBUG "%s: PError timeout (%d) "
-				"in ecp_write_block_pio\n", port->name, r);
+			printk(KERN_DEBUG "%s: PError timeout (%d) in ecp_write_block_pio\n",
+			       port->name, r);
 		}
 	}
 
@@ -824,7 +816,7 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
 	r = change_mode(port, ECR_ECP); /* ECP FIFO */
 	if (r)
 		printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
-								port->name);
+		       port->name);
 	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
 
 	/* Write the data to the FIFO. */
@@ -867,8 +859,8 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
 		parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
 		r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
 		if (r)
-			printk(KERN_DEBUG "%s: PE,1 timeout (%d) "
-				"in ecp_write_block_pio\n", port->name, r);
+			printk(KERN_DEBUG "%s: PE,1 timeout (%d) in ecp_write_block_pio\n",
+			       port->name, r);
 
 		parport_frob_control(port,
 				      PARPORT_CONTROL_INIT,
@@ -877,17 +869,16 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
 					     PARPORT_STATUS_PAPEROUT,
 					     PARPORT_STATUS_PAPEROUT);
 		if (r)
-			printk(KERN_DEBUG "%s: PE,2 timeout (%d) "
-				"in ecp_write_block_pio\n", port->name, r);
+			printk(KERN_DEBUG "%s: PE,2 timeout (%d) in ecp_write_block_pio\n",
+			       port->name, r);
 	}
 
 	r = parport_wait_peripheral(port,
 				     PARPORT_STATUS_BUSY,
 				     PARPORT_STATUS_BUSY);
 	if (r)
-		printk(KERN_DEBUG
-			"%s: BUSY timeout (%d) in ecp_write_block_pio\n",
-			port->name, r);
+		printk(KERN_DEBUG "%s: BUSY timeout (%d) in ecp_write_block_pio\n",
+		       port->name, r);
 
 	port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
 
@@ -982,28 +973,24 @@ static void show_parconfig_smsc37c669(int io, int key)
 	outb(0xaa, io);
 
 	if (verbose_probing) {
-		printk(KERN_INFO
-			"SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
-			"A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
+		pr_info("SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
 			cr1, cr4, cra, cr23, cr26, cr27);
 
 		/* The documentation calls DMA and IRQ-Lines by letters, so
 		   the board maker can/will wire them
 		   appropriately/randomly...  G=reserved H=IDE-irq, */
-		printk(KERN_INFO
-	"SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n",
-				cr23 * 4,
-				(cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-',
-				(cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-',
-				cra & 0x0f);
-		printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
-		       (cr23 * 4 >= 0x100) ? "yes" : "no",
-		       (cr1 & 4) ? "yes" : "no");
-		printk(KERN_INFO
-			"SMSC LPT Config: Port mode=%s, EPP version =%s\n",
-				(cr1 & 0x08) ? "Standard mode only (SPP)"
-					      : modes[cr4 & 0x03],
-				(cr4 & 0x40) ? "1.7" : "1.9");
+		pr_info("SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n",
+			cr23 * 4,
+			(cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-',
+			(cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-',
+			cra & 0x0f);
+		pr_info("SMSC LPT Config: enabled=%s power=%s\n",
+			(cr23 * 4 >= 0x100) ? "yes" : "no",
+			(cr1 & 4) ? "yes" : "no");
+		pr_info("SMSC LPT Config: Port mode=%s, EPP version =%s\n",
+			(cr1 & 0x08) ? "Standard mode only (SPP)"
+			: modes[cr4 & 0x03],
+			(cr4 & 0x40) ? "1.7" : "1.9");
 	}
 
 	/* Heuristics !  BIOS setup for this mainboard device limits
@@ -1013,7 +1000,7 @@ static void show_parconfig_smsc37c669(int io, int key)
 	if (cr23 * 4 >= 0x100) { /* if active */
 		s = find_free_superio();
 		if (s == NULL)
-			printk(KERN_INFO "Super-IO: too many chips!\n");
+			pr_info("Super-IO: too many chips!\n");
 		else {
 			int d;
 			switch (cr23 * 4) {
@@ -1078,26 +1065,24 @@ static void show_parconfig_winbond(int io, int key)
 	outb(0xaa, io);
 
 	if (verbose_probing) {
-		printk(KERN_INFO
-    "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n",
-					cr30, cr60, cr61, cr70, cr74, crf0);
-		printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
-		       (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
+		pr_info("Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n",
+			cr30, cr60, cr61, cr70, cr74, crf0);
+		pr_info("Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
+			(cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
 		if ((cr74 & 0x07) > 3)
 			pr_cont("dma=none\n");
 		else
 			pr_cont("dma=%d\n", cr74 & 0x07);
-		printk(KERN_INFO
-		    "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
-					irqtypes[crf0>>7], (crf0>>3)&0x0f);
-		printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n",
-					modes[crf0 & 0x07]);
+		pr_info("Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
+			irqtypes[crf0 >> 7], (crf0 >> 3) & 0x0f);
+		pr_info("Winbond LPT Config: Port mode=%s\n",
+			modes[crf0 & 0x07]);
 	}
 
 	if (cr30 & 0x01) { /* the settings can be interrogated later ... */
 		s = find_free_superio();
 		if (s == NULL)
-			printk(KERN_INFO "Super-IO: too many chips!\n");
+			pr_info("Super-IO: too many chips!\n");
 		else {
 			s->io = (cr60 << 8) | cr61;
 			s->irq = cr70 & 0x0f;
@@ -1151,9 +1136,8 @@ static void decode_winbond(int efer, int key, int devid, int devrev, int oldid)
 		progif = 0;
 
 	if (verbose_probing)
-		printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
-		       "devid=%02x devrev=%02x oldid=%02x type=%s\n",
-		       efer, key, devid, devrev, oldid, type);
+		pr_info("Winbond chip at EFER=0x%x key=0x%02x devid=%02x devrev=%02x oldid=%02x type=%s\n",
+			efer, key, devid, devrev, oldid, type);
 
 	if (progif == 2)
 		show_parconfig_winbond(efer, key);
@@ -1184,9 +1168,8 @@ static void decode_smsc(int efer, int key, int devid, int devrev)
 		type = "37c666GT";
 
 	if (verbose_probing)
-		printk(KERN_INFO "SMSC chip at EFER=0x%x "
-		       "key=0x%02x devid=%02x devrev=%02x type=%s\n",
-		       efer, key, devid, devrev, type);
+		pr_info("SMSC chip at EFER=0x%x key=0x%02x devid=%02x devrev=%02x type=%s\n",
+			efer, key, devid, devrev, type);
 
 	if (func)
 		func(efer, key);
@@ -1358,7 +1341,7 @@ static void detect_and_report_it87(void)
 	dev |= inb(0x2f);
 	if (dev == 0x8712 || dev == 0x8705 || dev == 0x8715 ||
 	    dev == 0x8716 || dev == 0x8718 || dev == 0x8726) {
-		printk(KERN_INFO "IT%04X SuperIO detected.\n", dev);
+		pr_info("IT%04X SuperIO detected\n", dev);
 		outb(0x07, 0x2E);	/* Parallel Port */
 		outb(0x03, 0x2F);
 		outb(0xF0, 0x2E);	/* BOOT 0x80 off */
@@ -1445,8 +1428,8 @@ static int parport_SPP_supported(struct parport *pb)
 	if (user_specified)
 		/* That didn't work, but the user thinks there's a
 		 * port here. */
-		printk(KERN_INFO "parport 0x%lx (WARNING): CTR: "
-			"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
+		pr_info("parport 0x%lx (WARNING): CTR: wrote 0x%02x, read 0x%02x\n",
+			pb->base, w, r);
 
 	/* Try the data register.  The data lines aren't tri-stated at
 	 * this stage, so we expect back what we wrote. */
@@ -1464,10 +1447,9 @@ static int parport_SPP_supported(struct parport *pb)
 	if (user_specified) {
 		/* Didn't work, but the user is convinced this is the
 		 * place. */
-		printk(KERN_INFO "parport 0x%lx (WARNING): DATA: "
-			"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
-		printk(KERN_INFO "parport 0x%lx: You gave this address, "
-			"but there is probably no parallel port there!\n",
+		pr_info("parport 0x%lx (WARNING): DATA: wrote 0x%02x, read 0x%02x\n",
+			pb->base, w, r);
+		pr_info("parport 0x%lx: You gave this address, but there is probably no parallel port there!\n",
 			pb->base);
 	}
 
@@ -1620,7 +1602,7 @@ static int parport_ECP_supported(struct parport *pb)
 	if (i <= priv->fifo_depth) {
 		if (verbose_probing)
 			printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
-				pb->base, i);
+			       pb->base, i);
 	} else
 		/* Number of bytes we know we can write if we get an
 		   interrupt. */
@@ -1642,7 +1624,7 @@ static int parport_ECP_supported(struct parport *pb)
 
 	if (i <= priv->fifo_depth) {
 		if (verbose_probing)
-			printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n",
+			pr_info("0x%lx: readIntrThreshold is %d\n",
 				pb->base, i);
 	} else
 		/* Number of bytes we can read if we get an interrupt. */
@@ -1657,17 +1639,14 @@ static int parport_ECP_supported(struct parport *pb)
 	switch (pword) {
 	case 0:
 		pword = 2;
-		printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
-			pb->base);
+		pr_warn("0x%lx: Unsupported pword size!\n", pb->base);
 		break;
 	case 2:
 		pword = 4;
-		printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
-			pb->base);
+		pr_warn("0x%lx: Unsupported pword size!\n", pb->base);
 		break;
 	default:
-		printk(KERN_WARNING "0x%lx: Unknown implementation ID\n",
-			pb->base);
+		pr_warn("0x%lx: Unknown implementation ID\n", pb->base);
 		/* Fall through - Assume 1 */
 	case 1:
 		pword = 1;
@@ -1676,14 +1655,14 @@ static int parport_ECP_supported(struct parport *pb)
 
 	if (verbose_probing) {
 		printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",
-			pb->base, 8 * pword);
+		       pb->base, 8 * pword);
 
-		printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
-			config & 0x80 ? "Level" : "Pulses");
+		printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n",
+		       pb->base, config & 0x80 ? "Level" : "Pulses");
 
 		configb = inb(CONFIGB(pb));
 		printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
-			pb->base, config, configb);
+		       pb->base, config, configb);
 		printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
 		if ((configb >> 3) & 0x07)
 			pr_cont("%d", intrline[(configb >> 3) & 0x07]);
@@ -2107,9 +2086,9 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 
 	p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3;
 
-	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+	pr_info("%s: PC-style at 0x%lx", p->name, p->base);
 	if (p->base_hi && priv->ecr)
-		printk(KERN_CONT " (0x%lx)", p->base_hi);
+		pr_cont(" (0x%lx)", p->base_hi);
 	if (p->irq == PARPORT_IRQ_AUTO) {
 		p->irq = PARPORT_IRQ_NONE;
 		parport_irq_probe(p);
@@ -2120,7 +2099,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		p->irq = PARPORT_IRQ_NONE;
 	}
 	if (p->irq != PARPORT_IRQ_NONE) {
-		printk(KERN_CONT ", irq %d", p->irq);
+		pr_cont(", irq %d", p->irq);
 		priv->ctr_writable |= 0x10;
 
 		if (p->dma == PARPORT_DMA_AUTO) {
@@ -2144,41 +2123,39 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		/* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
 #endif /* IEEE 1284 support */
 		if (p->dma != PARPORT_DMA_NONE) {
-			printk(KERN_CONT ", dma %d", p->dma);
+			pr_cont(", dma %d", p->dma);
 			p->modes |= PARPORT_MODE_DMA;
 		} else
-			printk(KERN_CONT ", using FIFO");
+			pr_cont(", using FIFO");
 	} else
 		/* We can't use the DMA channel after all. */
 		p->dma = PARPORT_DMA_NONE;
 #endif /* Allowed to use FIFO/DMA */
 
-	printk(KERN_CONT " [");
+	pr_cont(" [");
 
-#define printmode(x) \
-	{\
-		if (p->modes & PARPORT_MODE_##x) {\
-			printk(KERN_CONT "%s%s", f ? "," : "", #x);\
-			f++;\
-		} \
-	}
+#define printmode(x)							\
+do {									\
+	if (p->modes & PARPORT_MODE_##x)				\
+		pr_cont("%s%s", f++ ? "," : "", #x);			\
+} while (0)
 
 	{
 		int f = 0;
 		printmode(PCSPP);
 		printmode(TRISTATE);
-		printmode(COMPAT)
+		printmode(COMPAT);
 		printmode(EPP);
 		printmode(ECP);
 		printmode(DMA);
 	}
 #undef printmode
 #ifndef CONFIG_PARPORT_1284
-	printk(KERN_CONT "(,...)");
+	pr_cont("(,...)");
 #endif /* CONFIG_PARPORT_1284 */
-	printk(KERN_CONT "]\n");
+	pr_cont("]\n");
 	if (probedirq != PARPORT_IRQ_NONE)
-		printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
+		pr_info("%s: irq %d detected\n", p->name, probedirq);
 
 	/* If No ECP release the ports grabbed above. */
 	if (ECR_res && (p->modes & PARPORT_MODE_ECP) == 0) {
@@ -2193,8 +2170,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 	if (p->irq != PARPORT_IRQ_NONE) {
 		if (request_irq(p->irq, parport_irq_handler,
 				 irqflags, p->name, p)) {
-			printk(KERN_WARNING "%s: irq %d in use, "
-				"resorting to polled operation\n",
+			pr_warn("%s: irq %d in use, resorting to polled operation\n",
 				p->name, p->irq);
 			p->irq = PARPORT_IRQ_NONE;
 			p->dma = PARPORT_DMA_NONE;
@@ -2204,8 +2180,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 #ifdef HAS_DMA
 		if (p->dma != PARPORT_DMA_NONE) {
 			if (request_dma(p->dma, p->name)) {
-				printk(KERN_WARNING "%s: dma %d in use, "
-					"resorting to PIO operation\n",
+				pr_warn("%s: dma %d in use, resorting to PIO operation\n",
 					p->name, p->dma);
 				p->dma = PARPORT_DMA_NONE;
 			} else {
@@ -2215,9 +2190,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 						       &priv->dma_handle,
 						       GFP_KERNEL);
 				if (!priv->dma_buf) {
-					printk(KERN_WARNING "%s: "
-						"cannot get buffer for DMA, "
-						"resorting to PIO operation\n",
+					pr_warn("%s: cannot get buffer for DMA, resorting to PIO operation\n",
 						p->name);
 					free_dma(p->dma);
 					p->dma = PARPORT_DMA_NONE;
@@ -2313,7 +2286,7 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
 	int irq;
 	int i;
 
-	DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n");
+	pr_debug("sio_ite_8872_probe()\n");
 
 	/* make sure which one chip */
 	for (i = 0; i < 5; i++) {
@@ -2330,7 +2303,7 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
 		}
 	}
 	if (i >= 5) {
-		printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
+		pr_info("parport_pc: cannot find ITE8872 INTA\n");
 		return 0;
 	}
 
@@ -2339,29 +2312,28 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
 
 	switch (type) {
 	case 0x2:
-		printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n");
+		pr_info("parport_pc: ITE8871 found (1P)\n");
 		ite8872set = 0x64200000;
 		break;
 	case 0xa:
-		printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n");
+		pr_info("parport_pc: ITE8875 found (1P)\n");
 		ite8872set = 0x64200000;
 		break;
 	case 0xe:
-		printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
+		pr_info("parport_pc: ITE8872 found (2S1P)\n");
 		ite8872set = 0x64e00000;
 		break;
 	case 0x6:
-		printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+		pr_info("parport_pc: ITE8873 found (1S)\n");
 		release_region(inta_addr[i], 32);
 		return 0;
 	case 0x8:
-		printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n");
+		pr_info("parport_pc: ITE8874 found (2S)\n");
 		release_region(inta_addr[i], 32);
 		return 0;
 	default:
-		printk(KERN_INFO "parport_pc: unknown ITE887x\n");
-		printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' "
-			"output to Rich.Liu@ite.com.tw\n");
+		pr_info("parport_pc: unknown ITE887x\n");
+		pr_info("parport_pc: please mail 'lspci -nvv' output to Rich.Liu@ite.com.tw\n");
 		release_region(inta_addr[i], 32);
 		return 0;
 	}
@@ -2379,11 +2351,9 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
 	pci_write_config_dword(pdev, 0x9c,
 				ite8872set | (ite8872_irq * 0x11111));
 
-	DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
-	DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
-		 ite8872_lpt);
-	DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
-		 ite8872_lpthi);
+	pr_debug("ITE887x: The IRQ is %d\n", ite8872_irq);
+	pr_debug("ITE887x: The PARALLEL I/O port is 0x%x\n", ite8872_lpt);
+	pr_debug("ITE887x: The PARALLEL I/O porthi is 0x%x\n", ite8872_lpthi);
 
 	/* Let the user (or defaults) steer us away from interrupts */
 	irq = ite8872_irq;
@@ -2396,9 +2366,8 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
 	release_region(inta_addr[i], 32);
 	if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
 				   irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
-		printk(KERN_INFO
-			"parport_pc: ITE 8872 parallel port: io=0x%X",
-								ite8872_lpt);
+		pr_info("parport_pc: ITE 8872 parallel port: io=0x%X",
+			ite8872_lpt);
 		if (irq != PARPORT_IRQ_NONE)
 			pr_cont(", irq=%d", irq);
 		pr_cont("\n");
@@ -2471,8 +2440,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
 		have_epp = 1;
 		break;
 	default:
-		printk(KERN_DEBUG
-			"parport_pc: probing current configuration\n");
+		printk(KERN_DEBUG "parport_pc: probing current configuration\n");
 		siofunc = VIA_FUNCTION_PROBE;
 		break;
 	}
@@ -2508,12 +2476,11 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
 	port1 = inb(VIA_CONFIG_DATA) << 2;
 
 	printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",
-									port1);
+	       port1);
 	if (port1 == 0x3BC && have_epp) {
 		outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
 		outb((0x378 >> 2), VIA_CONFIG_DATA);
-		printk(KERN_DEBUG
-			"parport_pc: Parallel port base changed to 0x378\n");
+		printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
 		port1 = 0x378;
 	}
 
@@ -2525,7 +2492,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
 	pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
 
 	if (siofunc == VIA_FUNCTION_PARPORT_DISABLE) {
-		printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
+		pr_info("parport_pc: VIA parallel port disabled in BIOS\n");
 		return 0;
 	}
 
@@ -2558,9 +2525,8 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
 	case 0x278:
 		port2 = 0x678; break;
 	default:
-		printk(KERN_INFO
-			"parport_pc: Weird VIA parport base 0x%X, ignoring\n",
-									port1);
+		pr_info("parport_pc: Weird VIA parport base 0x%X, ignoring\n",
+			port1);
 		return 0;
 	}
 
@@ -2579,8 +2545,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
 
 	/* finally, do the probe with values obtained */
 	if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) {
-		printk(KERN_INFO
-			"parport_pc: VIA parallel port: io=0x%X", port1);
+		pr_info("parport_pc: VIA parallel port: io=0x%X", port1);
 		if (irq != PARPORT_IRQ_NONE)
 			pr_cont(", irq=%d", irq);
 		if (dma != PARPORT_DMA_NONE)
@@ -2589,7 +2554,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
 		return 1;
 	}
 
-	printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
+	pr_warn("parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
 		port1, irq, dma);
 	return 0;
 }
@@ -2854,14 +2819,12 @@ static int parport_pc_pci_probe(struct pci_dev *dev,
 		/* TODO: test if sharing interrupts works */
 		irq = dev->irq;
 		if (irq == IRQ_NONE) {
-			printk(KERN_DEBUG
-	"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
-				id->vendor, id->device, io_lo, io_hi);
+			printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
+			       id->vendor, id->device, io_lo, io_hi);
 			irq = PARPORT_IRQ_NONE;
 		} else {
-			printk(KERN_DEBUG
-	"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
-				id->vendor, id->device, io_lo, io_hi, irq);
+			printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
+			       id->vendor, id->device, io_lo, io_hi, irq);
 		}
 		data->ports[count] =
 			parport_pc_probe_port(io_lo, io_hi, irq,
@@ -3111,7 +3074,7 @@ static int __init parport_parse_param(const char *s, int *val,
 		if (ep != s)
 			*val = r;
 		else {
-			printk(KERN_ERR "parport: bad specifier `%s'\n", s);
+			pr_err("parport: bad specifier `%s'\n", s);
 			return -1;
 		}
 	}
@@ -3133,8 +3096,8 @@ static int __init parport_parse_dma(const char *dmastr, int *val)
 #ifdef CONFIG_PCI
 static int __init parport_init_mode_setup(char *str)
 {
-	printk(KERN_DEBUG
-	     "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+	printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n",
+	       str);
 
 	if (!strcmp(str, "spp"))
 		parport_init_mode = 1;
@@ -3201,10 +3164,7 @@ static int __init parse_parport_params(void)
 				irqval[0] = val;
 				break;
 			default:
-				printk(KERN_WARNING
-					"parport_pc: irq specified "
-					"without base address.  Use 'io=' "
-					"to specify one\n");
+				pr_warn("parport_pc: irq specified without base address.  Use 'io=' to specify one\n");
 			}
 
 		if (dma[0] && !parport_parse_dma(dma[0], &val))
@@ -3214,10 +3174,7 @@ static int __init parse_parport_params(void)
 				dmaval[0] = val;
 				break;
 			default:
-				printk(KERN_WARNING
-					"parport_pc: dma specified "
-					"without base address.  Use 'io=' "
-					"to specify one\n");
+				pr_warn("parport_pc: dma specified without base address.  Use 'io=' to specify one\n");
 			}
 	}
 	return 0;
@@ -3256,12 +3213,12 @@ static int __init parport_setup(char *str)
 
 	val = simple_strtoul(str, &endptr, 0);
 	if (endptr == str) {
-		printk(KERN_WARNING "parport=%s not understood\n", str);
+		pr_warn("parport=%s not understood\n", str);
 		return 1;
 	}
 
 	if (parport_setup_ptr == PARPORT_PC_MAX_PORTS) {
-		printk(KERN_ERR "parport=%s ignored, too many ports\n", str);
+		pr_err("parport=%s ignored, too many ports\n", str);
 		return 1;
 	}
 
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index d5a669b60c27..e840c1b5ab90 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -314,7 +314,7 @@ static int bpp_probe(struct platform_device *op)
 	value_tcr &= ~P_TCR_DIR;
 	sbus_writeb(value_tcr, &regs->p_tcr);
 
-	printk(KERN_INFO "%s: sunbpp at 0x%lx\n", p->name, p->base);
+	pr_info("%s: sunbpp at 0x%lx\n", p->name, p->base);
 
 	dev_set_drvdata(&op->dev, p);
 
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
index e5e6a463a941..7e6d713fa5ac 100644
--- a/drivers/parport/probe.c
+++ b/drivers/parport/probe.c
@@ -38,16 +38,16 @@ static void pretty_print(struct parport *port, int device)
 {
 	struct parport_device_info *info = &port->probe_info[device + 1];
 
-	printk(KERN_INFO "%s", port->name);
+	pr_info("%s", port->name);
 
 	if (device >= 0)
-		printk (" (addr %d)", device);
+		pr_cont(" (addr %d)", device);
 
-	printk (": %s", classes[info->class].descr);
+	pr_cont(": %s", classes[info->class].descr);
 	if (info->class)
-		printk(", %s %s", info->mfr, info->model);
+		pr_cont(", %s %s", info->mfr, info->model);
 
-	printk("\n");
+	pr_cont("\n");
 }
 
 static void parse_data(struct parport *port, int device, char *str)
@@ -58,7 +58,7 @@ static void parse_data(struct parport *port, int device, char *str)
 	struct parport_device_info *info = &port->probe_info[device + 1];
 
 	if (!txt) {
-		printk(KERN_WARNING "%s probe: memory squeeze\n", port->name);
+		pr_warn("%s probe: memory squeeze\n", port->name);
 		return;
 	}
 	strcpy(txt, str);
@@ -98,7 +98,8 @@ static void parse_data(struct parport *port, int device, char *str)
 						goto rock_on;
 					}
 				}
-				printk(KERN_WARNING "%s probe: warning, class '%s' not understood.\n", port->name, sep);
+				pr_warn("%s probe: warning, class '%s' not understood\n",
+					port->name, sep);
 				info->class = PARPORT_CLASS_OTHER;
 			} else if (!strcmp(p, "CMD") ||
 				   !strcmp(p, "COMMAND SET")) {
@@ -177,9 +178,8 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
 		 * just return constant nibble forever. This catches
 		 * also those cases. */
 		if (idlens[0] == 0 || idlens[0] > 0xFFF) {
-			printk (KERN_DEBUG "%s: reported broken Device ID"
-				" length of %#zX bytes\n",
-				port->name, idlens[0]);
+			printk(KERN_DEBUG "%s: reported broken Device ID length of %#zX bytes\n",
+			       port->name, idlens[0]);
 			return -EIO;
 		}
 		numidlens = 2;
@@ -201,10 +201,8 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
 
 		if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
 			if (belen != len) {
-				printk (KERN_DEBUG "%s: Device ID was %zd bytes"
-					" while device told it would be %d"
-					" bytes\n",
-					port->name, len, belen);
+				printk(KERN_DEBUG "%s: Device ID was %zd bytes while device told it would be %d bytes\n",
+				       port->name, len, belen);
 			}
 			goto done;
 		}
@@ -214,11 +212,9 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
 		 * the first 256 bytes or so that we must have read so
 		 * far. */
 		if (buffer[len-1] == ';') {
- 			printk (KERN_DEBUG "%s: Device ID reading stopped"
-				" before device told data not available. "
-				"Current idlen %u of %u, len bytes %02X %02X\n",
-				port->name, current_idlen, numidlens,
-				length[0], length[1]);
+			printk(KERN_DEBUG "%s: Device ID reading stopped before device told data not available. Current idlen %u of %u, len bytes %02X %02X\n",
+			       port->name, current_idlen, numidlens,
+			       length[0], length[1]);
 			goto done;
 		}
 	}
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
index 48804049d697..d740eba3c099 100644
--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -34,7 +34,7 @@
 #define PARPORT_MAX_SPINTIME_VALUE 1000
 
 static int do_active_device(struct ctl_table *table, int write,
-		      void __user *result, size_t *lenp, loff_t *ppos)
+		      void *result, size_t *lenp, loff_t *ppos)
 {
 	struct parport *port = (struct parport *)table->extra1;
 	char buffer[256];
@@ -65,13 +65,13 @@ static int do_active_device(struct ctl_table *table, int write,
 		*lenp = len;
 
 	*ppos += len;
-
-	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+	memcpy(result, buffer, len);
+	return 0;
 }
 
 #ifdef CONFIG_PARPORT_1284
 static int do_autoprobe(struct ctl_table *table, int write,
-			void __user *result, size_t *lenp, loff_t *ppos)
+			void *result, size_t *lenp, loff_t *ppos)
 {
 	struct parport_device_info *info = table->extra2;
 	const char *str;
@@ -108,13 +108,13 @@ static int do_autoprobe(struct ctl_table *table, int write,
 
 	*ppos += len;
 
-	return copy_to_user (result, buffer, len) ? -EFAULT : 0;
+	memcpy(result, buffer, len);
+	return 0;
 }
 #endif /* IEEE1284.3 support. */
 
 static int do_hardware_base_addr(struct ctl_table *table, int write,
-				 void __user *result,
-				 size_t *lenp, loff_t *ppos)
+				 void *result, size_t *lenp, loff_t *ppos)
 {
 	struct parport *port = (struct parport *)table->extra1;
 	char buffer[20];
@@ -136,13 +136,12 @@ static int do_hardware_base_addr(struct ctl_table *table, int write,
 		*lenp = len;
 
 	*ppos += len;
-
-	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+	memcpy(result, buffer, len);
+	return 0;
 }
 
 static int do_hardware_irq(struct ctl_table *table, int write,
-			   void __user *result,
-			   size_t *lenp, loff_t *ppos)
+			   void *result, size_t *lenp, loff_t *ppos)
 {
 	struct parport *port = (struct parport *)table->extra1;
 	char buffer[20];
@@ -164,13 +163,12 @@ static int do_hardware_irq(struct ctl_table *table, int write,
 		*lenp = len;
 
 	*ppos += len;
-
-	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+	memcpy(result, buffer, len);
+	return 0;
 }
 
 static int do_hardware_dma(struct ctl_table *table, int write,
-			   void __user *result,
-			   size_t *lenp, loff_t *ppos)
+			   void *result, size_t *lenp, loff_t *ppos)
 {
 	struct parport *port = (struct parport *)table->extra1;
 	char buffer[20];
@@ -192,13 +190,12 @@ static int do_hardware_dma(struct ctl_table *table, int write,
 		*lenp = len;
 
 	*ppos += len;
-
-	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+	memcpy(result, buffer, len);
+	return 0;
 }
 
 static int do_hardware_modes(struct ctl_table *table, int write,
-			     void __user *result,
-			     size_t *lenp, loff_t *ppos)
+			     void *result, size_t *lenp, loff_t *ppos)
 {
 	struct parport *port = (struct parport *)table->extra1;
 	char buffer[40];
@@ -213,7 +210,11 @@ static int do_hardware_modes(struct ctl_table *table, int write,
 		return -EACCES;
 
 	{
-#define printmode(x) {if(port->modes&PARPORT_MODE_##x){len+=sprintf(buffer+len,"%s%s",f?",":"",#x);f++;}}
+#define printmode(x)							\
+do {									\
+	if (port->modes & PARPORT_MODE_##x)				\
+		len += sprintf(buffer + len, "%s%s", f++ ? "," : "", #x); \
+} while (0)
 		int f = 0;
 		printmode(PCSPP);
 		printmode(TRISTATE);
@@ -231,8 +232,8 @@ static int do_hardware_modes(struct ctl_table *table, int write,
 		*lenp = len;
 
 	*ppos += len;
-
-	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+	memcpy(result, buffer, len);
+	return 0;
 }
 
 #define PARPORT_PORT_DIR(CHILD) { .procname = NULL, .mode = 0555, .child = CHILD }
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index d6920ebeabcd..7fec4fefe151 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -278,46 +278,32 @@ static int port_detect(struct device *dev, void *dev_drv)
 int __parport_register_driver(struct parport_driver *drv, struct module *owner,
 			      const char *mod_name)
 {
-	if (drv->devmodel) {
-		/* using device model */
-		int ret;
-
-		/* initialize common driver fields */
-		drv->driver.name = drv->name;
-		drv->driver.bus = &parport_bus_type;
-		drv->driver.owner = owner;
-		drv->driver.mod_name = mod_name;
-		ret = driver_register(&drv->driver);
-		if (ret)
-			return ret;
+	/* using device model */
+	int ret;
 
-		/*
-		 * check if bus has any parallel port registered, if
-		 * none is found then load the lowlevel driver.
-		 */
-		ret = bus_for_each_dev(&parport_bus_type, NULL, NULL,
-				       port_detect);
-		if (!ret)
-			get_lowlevel_driver();
-
-		mutex_lock(&registration_lock);
-		if (drv->match_port)
-			bus_for_each_dev(&parport_bus_type, NULL, drv,
-					 port_check);
-		mutex_unlock(&registration_lock);
-	} else {
-		struct parport *port;
-
-		drv->devmodel = false;
-
-		if (list_empty(&portlist))
-			get_lowlevel_driver();
-		mutex_lock(&registration_lock);
-		list_for_each_entry(port, &portlist, list)
-			drv->attach(port);
-		list_add(&drv->list, &drivers);
-		mutex_unlock(&registration_lock);
-	}
+	/* initialize common driver fields */
+	drv->driver.name = drv->name;
+	drv->driver.bus = &parport_bus_type;
+	drv->driver.owner = owner;
+	drv->driver.mod_name = mod_name;
+	ret = driver_register(&drv->driver);
+	if (ret)
+		return ret;
+
+	/*
+	 * check if bus has any parallel port registered, if
+	 * none is found then load the lowlevel driver.
+	 */
+	ret = bus_for_each_dev(&parport_bus_type, NULL, NULL,
+			       port_detect);
+	if (!ret)
+		get_lowlevel_driver();
+
+	mutex_lock(&registration_lock);
+	if (drv->match_port)
+		bus_for_each_dev(&parport_bus_type, NULL, drv,
+				 port_check);
+	mutex_unlock(&registration_lock);
 
 	return 0;
 }
@@ -352,17 +338,9 @@ static int port_detach(struct device *dev, void *_drv)
 
 void parport_unregister_driver(struct parport_driver *drv)
 {
-	struct parport *port;
-
 	mutex_lock(&registration_lock);
-	if (drv->devmodel) {
-		bus_for_each_dev(&parport_bus_type, NULL, drv, port_detach);
-		driver_unregister(&drv->driver);
-	} else {
-		list_del_init(&drv->list);
-		list_for_each_entry(port, &portlist, list)
-			drv->detach(port);
-	}
+	bus_for_each_dev(&parport_bus_type, NULL, drv, port_detach);
+	driver_unregister(&drv->driver);
 	mutex_unlock(&registration_lock);
 }
 EXPORT_SYMBOL(parport_unregister_driver);
@@ -554,8 +532,8 @@ void parport_announce_port(struct parport *port)
 #endif
 
 	if (!port->dev)
-		printk(KERN_WARNING "%s: fix this legacy no-device port driver!\n",
-		       port->name);
+		pr_warn("%s: fix this legacy no-device port driver!\n",
+			port->name);
 
 	parport_proc_register(port);
 	mutex_lock(&registration_lock);
@@ -641,47 +619,48 @@ void parport_remove_port(struct parport *port)
 }
 EXPORT_SYMBOL(parport_remove_port);
 
+static void free_pardevice(struct device *dev)
+{
+	struct pardevice *par_dev = to_pardevice(dev);
+
+	kfree(par_dev->name);
+	kfree(par_dev);
+}
+
 /**
- *	parport_register_device - register a device on a parallel port
+ *	parport_register_dev_model - register a device on a parallel port
  *	@port: port to which the device is attached
  *	@name: a name to refer to the device
- *	@pf: preemption callback
- *	@kf: kick callback (wake-up)
- *	@irq_func: interrupt handler
- *	@flags: registration flags
- *	@handle: data for callback functions
+ *	@par_dev_cb: struct containing callbacks
+ *	@id: device number to be given to the device
  *
  *	This function, called by parallel port device drivers,
  *	declares that a device is connected to a port, and tells the
  *	system all it needs to know.
  *
- *	The @name is allocated by the caller and must not be
- *	deallocated until the caller calls @parport_unregister_device
- *	for that device.
- *
- *	The preemption callback function, @pf, is called when this
- *	device driver has claimed access to the port but another
- *	device driver wants to use it.  It is given @handle as its
- *	parameter, and should return zero if it is willing for the
- *	system to release the port to another driver on its behalf.
- *	If it wants to keep control of the port it should return
- *	non-zero, and no action will be taken.  It is good manners for
- *	the driver to try to release the port at the earliest
- *	opportunity after its preemption callback rejects a preemption
- *	attempt.  Note that if a preemption callback is happy for
- *	preemption to go ahead, there is no need to release the port;
- *	it is done automatically.  This function may not block, as it
- *	may be called from interrupt context.  If the device driver
- *	does not support preemption, @pf can be %NULL.
+ *	The struct pardev_cb contains pointer to callbacks. preemption
+ *	callback function, @preempt, is called when this device driver
+ *	has claimed access to the port but another device driver wants
+ *	to use it.  It is given, @private, as its parameter, and should
+ *	return zero if it is willing for the system to release the port
+ *	to another driver on its behalf. If it wants to keep control of
+ *	the port it should return non-zero, and no action will be taken.
+ *	It is good manners for the driver to try to release the port at
+ *	the earliest opportunity after its preemption callback rejects a
+ *	preemption attempt. Note that if a preemption callback is happy
+ *	for preemption to go ahead, there is no need to release the
+ *	port; it is done automatically. This function may not block, as
+ *	it may be called from interrupt context. If the device driver
+ *	does not support preemption, @preempt can be %NULL.
  *
- *	The wake-up ("kick") callback function, @kf, is called when
+ *	The wake-up ("kick") callback function, @wakeup, is called when
  *	the port is available to be claimed for exclusive access; that
  *	is, parport_claim() is guaranteed to succeed when called from
  *	inside the wake-up callback function.  If the driver wants to
  *	claim the port it should do so; otherwise, it need not take
  *	any action.  This function may not block, as it may be called
  *	from interrupt context.  If the device driver does not want to
- *	be explicitly invited to claim the port in this way, @kf can
+ *	be explicitly invited to claim the port in this way, @wakeup can
  *	be %NULL.
  *
  *	The interrupt handler, @irq_func, is called when an interrupt
@@ -710,138 +689,6 @@ EXPORT_SYMBOL(parport_remove_port);
  *	to allocate space for that structure.
  **/
 
-struct pardevice *
-parport_register_device(struct parport *port, const char *name,
-			int (*pf)(void *), void (*kf)(void *),
-			void (*irq_func)(void *),
-			int flags, void *handle)
-{
-	struct pardevice *tmp;
-
-	if (port->physport->flags & PARPORT_FLAG_EXCL) {
-		/* An exclusive device is registered. */
-		printk(KERN_DEBUG "%s: no more devices allowed\n",
-			port->name);
-		return NULL;
-	}
-
-	if (flags & PARPORT_DEV_LURK) {
-		if (!pf || !kf) {
-			printk(KERN_INFO "%s: refused to register lurking device (%s) without callbacks\n", port->name, name);
-			return NULL;
-		}
-	}
-
-	if (flags & PARPORT_DEV_EXCL) {
-		if (port->physport->devices) {
-			/*
-			 * If a device is already registered and this new
-			 * device wants exclusive access, then no need to
-			 * continue as we can not grant exclusive access to
-			 * this device.
-			 */
-			pr_err("%s: cannot grant exclusive access for device %s\n",
-			       port->name, name);
-			return NULL;
-		}
-	}
-
-	/*
-	 * We up our own module reference count, and that of the port
-	 * on which a device is to be registered, to ensure that
-	 * neither of us gets unloaded while we sleep in (e.g.)
-	 * kmalloc.
-	 */
-	if (!try_module_get(port->ops->owner))
-		return NULL;
-
-	parport_get_port(port);
-
-	tmp = kmalloc(sizeof(struct pardevice), GFP_KERNEL);
-	if (!tmp)
-		goto out;
-
-	tmp->state = kmalloc(sizeof(struct parport_state), GFP_KERNEL);
-	if (!tmp->state)
-		goto out_free_pardevice;
-
-	tmp->name = name;
-	tmp->port = port;
-	tmp->daisy = -1;
-	tmp->preempt = pf;
-	tmp->wakeup = kf;
-	tmp->private = handle;
-	tmp->flags = flags;
-	tmp->irq_func = irq_func;
-	tmp->waiting = 0;
-	tmp->timeout = 5 * HZ;
-	tmp->devmodel = false;
-
-	/* Chain this onto the list */
-	tmp->prev = NULL;
-	/*
-	 * This function must not run from an irq handler so we don' t need
-	 * to clear irq on the local CPU. -arca
-	 */
-	spin_lock(&port->physport->pardevice_lock);
-
-	if (flags & PARPORT_DEV_EXCL) {
-		if (port->physport->devices) {
-			spin_unlock(&port->physport->pardevice_lock);
-			printk(KERN_DEBUG
-				"%s: cannot grant exclusive access for device %s\n",
-				port->name, name);
-			goto out_free_all;
-		}
-		port->flags |= PARPORT_FLAG_EXCL;
-	}
-
-	tmp->next = port->physport->devices;
-	wmb(); /*
-		* Make sure that tmp->next is written before it's
-		* added to the list; see comments marked 'no locking
-		* required'
-		*/
-	if (port->physport->devices)
-		port->physport->devices->prev = tmp;
-	port->physport->devices = tmp;
-	spin_unlock(&port->physport->pardevice_lock);
-
-	init_waitqueue_head(&tmp->wait_q);
-	tmp->timeslice = parport_default_timeslice;
-	tmp->waitnext = tmp->waitprev = NULL;
-
-	/*
-	 * This has to be run as last thing since init_state may need other
-	 * pardevice fields. -arca
-	 */
-	port->ops->init_state(tmp, tmp->state);
-	if (!test_and_set_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags)) {
-		port->proc_device = tmp;
-		parport_device_proc_register(tmp);
-	}
-	return tmp;
-
- out_free_all:
-	kfree(tmp->state);
- out_free_pardevice:
-	kfree(tmp);
- out:
-	parport_put_port(port);
-	module_put(port->ops->owner);
-
-	return NULL;
-}
-EXPORT_SYMBOL(parport_register_device);
-
-static void free_pardevice(struct device *dev)
-{
-	struct pardevice *par_dev = to_pardevice(dev);
-
-	kfree(par_dev->name);
-	kfree(par_dev);
-}
-
 struct pardevice *
 parport_register_dev_model(struct parport *port, const char *name,
 			   const struct pardev_cb *par_dev_cb, int id)
@@ -996,7 +843,7 @@ void parport_unregister_device(struct pardevice *dev)
 
 #ifdef PARPORT_PARANOID
 	if (!dev) {
-		printk(KERN_ERR "parport_unregister_device: passed NULL\n");
+		pr_err("%s: passed NULL\n", __func__);
 		return;
 	}
 #endif
@@ -1046,10 +893,7 @@ void parport_unregister_device(struct pardevice *dev)
 	spin_unlock_irq(&port->waitlist_lock);
 
 	kfree(dev->state);
-	if (dev->devmodel)
-		device_unregister(&dev->dev);
-	else
-		kfree(dev);
+	device_unregister(&dev->dev);
 
 	module_put(port->ops->owner);
 	parport_put_port(port);
@@ -1137,8 +981,7 @@ int parport_claim(struct pardevice *dev)
 	unsigned long flags;
 
 	if (port->cad == dev) {
-		printk(KERN_INFO "%s: %s already owner\n",
-		       dev->port->name,dev->name);
+		pr_info("%s: %s already owner\n", dev->port->name, dev->name);
 		return 0;
 	}
 
@@ -1158,9 +1001,8 @@ int parport_claim(struct pardevice *dev)
 			 * I think we'll actually deadlock rather than
 			 * get here, but just in case..
 			 */
-			printk(KERN_WARNING
-			       "%s: %s released port when preempted!\n",
-			       port->name, oldcad->name);
+			pr_warn("%s: %s released port when preempted!\n",
+				port->name, oldcad->name);
 			if (port->cad)
 				goto blocked;
 		}
@@ -1260,7 +1102,8 @@ int parport_claim_or_block(struct pardevice *dev)
 	r = parport_claim(dev);
 	if (r == -EAGAIN) {
 #ifdef PARPORT_DEBUG_SHARING
-		printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n", dev->name);
+		printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n",
+		       dev->name);
 #endif
 		/*
 		 * FIXME!!! Use the proper locking for dev->waiting,
@@ -1293,7 +1136,7 @@ int parport_claim_or_block(struct pardevice *dev)
 		if (dev->port->physport->cad != dev)
 			printk(KERN_DEBUG "%s: exiting parport_claim_or_block but %s owns port!\n",
 			       dev->name, dev->port->physport->cad ?
-			       dev->port->physport->cad->name:"nobody");
+			       dev->port->physport->cad->name : "nobody");
 #endif
 	}
 	dev->waiting = 0;
@@ -1320,8 +1163,8 @@ void parport_release(struct pardevice *dev)
 	write_lock_irqsave(&port->cad_lock, flags);
 	if (port->cad != dev) {
 		write_unlock_irqrestore(&port->cad_lock, flags);
-		printk(KERN_WARNING "%s: %s tried to release parport when not owner\n",
-		       port->name, dev->name);
+		pr_warn("%s: %s tried to release parport when not owner\n",
+			port->name, dev->name);
 		return;
 	}
 
@@ -1361,7 +1204,8 @@ void parport_release(struct pardevice *dev)
 			if (dev->port->cad) /* racy but no matter */
 				return;
 		} else {
-			printk(KERN_ERR "%s: don't know how to wake %s\n", port->name, pd->name);
+			pr_err("%s: don't know how to wake %s\n",
+			       port->name, pd->name);
 		}
 	}
 
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 03dcaf65d159..ce13fd62d161 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -26,7 +26,7 @@ config PCI_DRA7XX_HOST
 	depends on OF && HAS_IOMEM && TI_PIPE3
 	select PCIE_DW_HOST
 	select PCI_DRA7XX
-	default y
+	default y if SOC_DRA7XX
 	help
 	  Enables support for the PCIe controller in the DRA7xx SoC to work in
 	  host mode. There are two instances of PCIe controller in DRA7xx.
@@ -111,7 +111,6 @@ config PCI_KEYSTONE_HOST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW_HOST
 	select PCI_KEYSTONE
-	default y
 	help
 	  Enables support for the PCIe controller in the Keystone SoC to
 	  work in host mode. The PCI controller on Keystone is based on
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index e15022ff63e3..222ff5639ebe 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1356,11 +1356,11 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 {
 	struct irq_cfg *cfg = irqd_cfg(data);
 	struct hv_pcibus_device *hbus;
+	struct vmbus_channel *channel;
 	struct hv_pci_dev *hpdev;
 	struct pci_bus *pbus;
 	struct pci_dev *pdev;
 	struct cpumask *dest;
-	unsigned long flags;
 	struct compose_comp_ctxt comp;
 	struct tran_int_desc *int_desc;
 	struct {
@@ -1378,6 +1378,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 	dest = irq_data_get_effective_affinity_mask(data);
 	pbus = pdev->bus;
 	hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
+	channel = hbus->hdev->channel;
 	hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
 	if (!hpdev)
 		goto return_null_message;
@@ -1435,43 +1436,52 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 		goto free_int_desc;
 	}
 
+	/*
+	 * Prevents hv_pci_onchannelcallback() from running concurrently
+	 * in the tasklet.
+	 */
+	tasklet_disable(&channel->callback_event);
+
 	/*
 	 * Since this function is called with IRQ locks held, can't
 	 * do normal wait for completion; instead poll.
 	 */
 	while (!try_wait_for_completion(&comp.comp_pkt.host_event)) {
+		unsigned long flags;
+
 		/* 0xFFFF means an invalid PCI VENDOR ID. */
 		if (hv_pcifront_get_vendor_id(hpdev) == 0xFFFF) {
 			dev_err_once(&hbus->hdev->device,
 				     "the device has gone\n");
-			goto free_int_desc;
+			goto enable_tasklet;
 		}
 
 		/*
-		 * When the higher level interrupt code calls us with
-		 * interrupt disabled, we must poll the channel by calling
-		 * the channel callback directly when channel->target_cpu is
-		 * the current CPU. When the higher level interrupt code
-		 * calls us with interrupt enabled, let's add the
-		 * local_irq_save()/restore() to avoid race:
-		 * hv_pci_onchannelcallback() can also run in tasklet.
+		 * Make sure that the ring buffer data structure doesn't get
+		 * freed while we dereference the ring buffer pointer.  Test
+		 * for the channel's onchannel_callback being NULL within a
+		 * sched_lock critical section.  See also the inline comments
+		 * in vmbus_reset_channel_cb().
 		 */
-		local_irq_save(flags);
-
-		if (hbus->hdev->channel->target_cpu == smp_processor_id())
-			hv_pci_onchannelcallback(hbus);
-
-		local_irq_restore(flags);
+		spin_lock_irqsave(&channel->sched_lock, flags);
+		if (unlikely(channel->onchannel_callback == NULL)) {
+			spin_unlock_irqrestore(&channel->sched_lock, flags);
+			goto enable_tasklet;
+		}
+		hv_pci_onchannelcallback(hbus);
+		spin_unlock_irqrestore(&channel->sched_lock, flags);
 
 		if (hpdev->state == hv_pcichild_ejecting) {
 			dev_err_once(&hbus->hdev->device,
 				     "the device is being ejected\n");
-			goto free_int_desc;
+			goto enable_tasklet;
 		}
 
 		udelay(100);
 	}
 
+	tasklet_enable(&channel->callback_event);
+
 	if (comp.comp_pkt.completion_status < 0) {
 		dev_err(&hbus->hdev->device,
 			"Request for interrupt failed: 0x%x",
@@ -1495,6 +1505,8 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 	put_pcichild(hpdev);
 	return;
 
+enable_tasklet:
+	tasklet_enable(&channel->callback_event);
 free_int_desc:
 	kfree(int_desc);
 drop_reference:
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index ae44f46d1bf3..4fd200d8b0a9 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -148,8 +148,6 @@ struct controller {
 #define MRL_SENS(ctrl)		((ctrl)->slot_cap & PCI_EXP_SLTCAP_MRLSP)
 #define ATTN_LED(ctrl)		((ctrl)->slot_cap & PCI_EXP_SLTCAP_AIP)
 #define PWR_LED(ctrl)		((ctrl)->slot_cap & PCI_EXP_SLTCAP_PIP)
-#define HP_SUPR_RM(ctrl)	((ctrl)->slot_cap & PCI_EXP_SLTCAP_HPS)
-#define EMI(ctrl)		((ctrl)->slot_cap & PCI_EXP_SLTCAP_EIP)
 #define NO_CMD_CMPL(ctrl)	((ctrl)->slot_cap & PCI_EXP_SLTCAP_NCCS)
 #define PSN(ctrl)		(((ctrl)->slot_cap & PCI_EXP_SLTCAP_PSN) >> 19)
 
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 312cc45c44c7..bf779f291f15 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -275,7 +275,7 @@ static int pciehp_suspend(struct pcie_device *dev)
 	 * If the port is already runtime suspended we can keep it that
 	 * way.
 	 */
-	if (dev_pm_smart_suspend_and_suspended(&dev->port->dev))
+	if (dev_pm_skip_suspend(&dev->port->dev))
 		return 0;
 
 	pciehp_disable_interrupt(dev);
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 6504869efabc..9887c9de08c3 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -435,7 +435,7 @@ static int rpaphp_drc_add_slot(struct device_node *dn)
  */
 int rpaphp_add_slot(struct device_node *dn)
 {
-	if (!dn->name || strcmp(dn->name, "pci"))
+	if (!of_node_name_eq(dn, "pci"))
 		return 0;
 
 	if (of_find_property(dn, "ibm,drc-info", NULL))
diff --git a/drivers/pci/hotplug/s390_pci_hpc.c b/drivers/pci/hotplug/s390_pci_hpc.c
index 39295d88f670..b59f84918fe0 100644
--- a/drivers/pci/hotplug/s390_pci_hpc.c
+++ b/drivers/pci/hotplug/s390_pci_hpc.c
@@ -52,6 +52,7 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev,
 					     hotplug_slot);
+	struct zpci_bus *zbus = zdev->zbus;
 	int rc;
 
 	if (zdev->state != ZPCI_FN_STATE_STANDBY)
@@ -65,9 +66,9 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
 	if (rc)
 		goto out_deconfigure;
 
-	pci_scan_slot(zdev->bus, ZPCI_DEVFN);
+	pci_scan_slot(zbus->bus, zdev->devfn);
 	pci_lock_rescan_remove();
-	pci_bus_add_devices(zdev->bus);
+	pci_bus_add_devices(zbus->bus);
 	pci_unlock_rescan_remove();
 
 	return rc;
@@ -82,13 +83,17 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
 	struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev,
 					     hotplug_slot);
 	struct pci_dev *pdev;
+	struct zpci_bus *zbus = zdev->zbus;
 	int rc;
 
 	if (!zpci_fn_configured(zdev->state))
 		return -EIO;
 
-	pdev = pci_get_slot(zdev->bus, ZPCI_DEVFN);
+	pdev = pci_get_slot(zbus->bus, zdev->devfn);
 	if (pdev) {
+		if (pci_num_vf(pdev))
+			return -EBUSY;
+
 		pci_stop_and_remove_bus_device_locked(pdev);
 		pci_dev_put(pdev);
 	}
@@ -133,12 +138,13 @@ static const struct hotplug_slot_ops s390_hotplug_slot_ops = {
 int zpci_init_slot(struct zpci_dev *zdev)
 {
 	char name[SLOT_NAME_SIZE];
+	struct zpci_bus *zbus = zdev->zbus;
 
 	zdev->hotplug_slot.ops = &s390_hotplug_slot_ops;
 
 	snprintf(name, SLOT_NAME_SIZE, "%08x", zdev->fid);
-	return pci_hp_register(&zdev->hotplug_slot, zdev->bus,
-			       ZPCI_DEVFN, name);
+	return pci_hp_register(&zdev->hotplug_slot, zbus->bus,
+			       zdev->devfn, name);
 }
 
 void zpci_exit_slot(struct zpci_dev *zdev)
diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c
index b73b10bce0df..e8e444eeb1cd 100644
--- a/drivers/pci/p2pdma.c
+++ b/drivers/pci/p2pdma.c
@@ -282,6 +282,8 @@ static const struct pci_p2pdma_whitelist_entry {
 } pci_p2pdma_whitelist[] = {
 	/* AMD ZEN */
 	{PCI_VENDOR_ID_AMD,	0x1450,	0},
+	{PCI_VENDOR_ID_AMD,	0x15d0,	0},
+	{PCI_VENDOR_ID_AMD,	0x1630,	0},
 
 	/* Intel Xeon E5/Core i7 */
 	{PCI_VENDOR_ID_INTEL,	0x3c00, REQ_SAME_HOST_BRIDGE},
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 0454ca0e4e3f..da6510af1221 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -776,7 +776,7 @@ static int pci_pm_suspend(struct device *dev)
 
 static int pci_pm_suspend_late(struct device *dev)
 {
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	pci_fixup_device(pci_fixup_suspend, to_pci_dev(dev));
@@ -789,10 +789,8 @@ static int pci_pm_suspend_noirq(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		dev->power.may_skip_resume = true;
+	if (dev_pm_skip_suspend(dev))
 		return 0;
-	}
 
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend_late(dev, PMSG_SUSPEND);
@@ -880,8 +878,8 @@ static int pci_pm_suspend_noirq(struct device *dev)
 	 * pci_pm_complete() to take care of fixing up the device's state
 	 * anyway, if need be.
 	 */
-	dev->power.may_skip_resume = device_may_wakeup(dev) ||
-					!device_can_wakeup(dev);
+	if (device_can_wakeup(dev) && !device_may_wakeup(dev))
+		dev->power.may_skip_resume = false;
 
 	return 0;
 }
@@ -893,17 +891,9 @@ static int pci_pm_resume_noirq(struct device *dev)
 	pci_power_t prev_state = pci_dev->current_state;
 	bool skip_bus_pm = pci_dev->skip_bus_pm;
 
-	if (dev_pm_may_skip_resume(dev))
+	if (dev_pm_skip_resume(dev))
 		return 0;
 
-	/*
-	 * Devices with DPM_FLAG_SMART_SUSPEND may be left in runtime suspend
-	 * during system suspend, so update their runtime PM status to "active"
-	 * as they are going to be put into D0 shortly.
-	 */
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		pm_runtime_set_active(dev);
-
 	/*
 	 * In the suspend-to-idle case, devices left in D0 during suspend will
 	 * stay in D0, so it is not necessary to restore or update their
@@ -928,6 +918,14 @@ static int pci_pm_resume_noirq(struct device *dev)
 	return 0;
 }
 
+static int pci_pm_resume_early(struct device *dev)
+{
+	if (dev_pm_skip_resume(dev))
+		return 0;
+
+	return pm_generic_resume_early(dev);
+}
+
 static int pci_pm_resume(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -961,6 +959,7 @@ static int pci_pm_resume(struct device *dev)
 #define pci_pm_suspend_late	NULL
 #define pci_pm_suspend_noirq	NULL
 #define pci_pm_resume		NULL
+#define pci_pm_resume_early	NULL
 #define pci_pm_resume_noirq	NULL
 
 #endif /* !CONFIG_SUSPEND */
@@ -1127,7 +1126,7 @@ static int pci_pm_poweroff(struct device *dev)
 
 static int pci_pm_poweroff_late(struct device *dev)
 {
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	pci_fixup_device(pci_fixup_suspend, to_pci_dev(dev));
@@ -1140,7 +1139,7 @@ static int pci_pm_poweroff_noirq(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	if (pci_has_legacy_pm_support(pci_dev))
@@ -1358,6 +1357,7 @@ static const struct dev_pm_ops pci_dev_pm_ops = {
 	.suspend = pci_pm_suspend,
 	.suspend_late = pci_pm_suspend_late,
 	.resume = pci_pm_resume,
+	.resume_early = pci_pm_resume_early,
 	.freeze = pci_pm_freeze,
 	.thaw = pci_pm_thaw,
 	.poweroff = pci_pm_poweroff,
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 595fcf59843f..b9fe87d16c55 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -868,7 +868,9 @@ static inline bool platform_pci_need_resume(struct pci_dev *dev)
 
 static inline bool platform_pci_bridge_d3(struct pci_dev *dev)
 {
-	return pci_platform_pm ? pci_platform_pm->bridge_d3(dev) : false;
+	if (pci_platform_pm && pci_platform_pm->bridge_d3)
+		return pci_platform_pm->bridge_d3(dev);
+	return false;
 }
 
 /**
@@ -1578,7 +1580,7 @@ EXPORT_SYMBOL(pci_restore_state);
 
 struct pci_saved_state {
 	u32 config_space[16];
-	struct pci_cap_saved_data cap[0];
+	struct pci_cap_saved_data cap[];
 };
 
 /**
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 66386811cfde..5b7b460a8a98 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -25,7 +25,6 @@ config PCIEAER
 	bool "PCI Express Advanced Error Reporting support"
 	depends on PCIEPORTBUS
 	select RAS
-	default y
 	help
 	  This enables PCI Express Root Port Advanced Error Reporting
 	  (AER) driver support. Error reporting messages sent to Root
@@ -63,7 +62,6 @@ config PCIE_ECRC
 #
 config PCIEASPM
 	bool "PCI Express ASPM control" if EXPERT
-	default y
 	help
 	  This enables OS control over PCI Express ASPM (Active State
 	  Power Management) and Clock Power Management. ASPM supports
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index f4274d301235..efc26773cc6d 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -318,30 +318,6 @@ int pcie_aer_get_firmware_first(struct pci_dev *dev)
 		aer_set_firmware_first(dev);
 	return dev->__aer_firmware_first;
 }
-
-static bool aer_firmware_first;
-
-/**
- * aer_acpi_firmware_first - Check if APEI should control AER.
- */
-bool aer_acpi_firmware_first(void)
-{
-	static bool parsed = false;
-	struct aer_hest_parse_info info = {
-		.pci_dev	= NULL,	/* Check all PCIe devices */
-		.firmware_first	= 0,
-	};
-
-	if (pcie_ports_native)
-		return false;
-
-	if (!parsed) {
-		apei_hest_parse(aer_hest_parse, &info);
-		aer_firmware_first = info.firmware_first;
-		parsed = true;
-	}
-	return aer_firmware_first;
-}
 #endif
 
 #define	PCI_EXP_AER_FLAGS	(PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | \
@@ -1523,7 +1499,7 @@ static struct pcie_port_service_driver aerdriver = {
  */
 int __init pcie_aer_init(void)
 {
-	if (!pci_aer_available() || aer_acpi_firmware_first())
+	if (!pci_aer_available())
 		return -ENXIO;
 	return pcie_port_service_register(&aerdriver);
 }
diff --git a/drivers/pci/pcie/edr.c b/drivers/pci/pcie/edr.c
index 594622a6cb16..a6b9b479b97a 100644
--- a/drivers/pci/pcie/edr.c
+++ b/drivers/pci/pcie/edr.c
@@ -148,11 +148,11 @@ static void edr_handle_event(acpi_handle handle, u32 event, void *data)
 	pci_ers_result_t estate = PCI_ERS_RESULT_DISCONNECT;
 	u16 status;
 
-	pci_info(pdev, "ACPI event %#x received\n", event);
-
 	if (event != ACPI_NOTIFY_DISCONNECT_RECOVER)
 		return;
 
+	pci_info(pdev, "EDR event received\n");
+
 	/* Locate the port which issued EDR event */
 	edev = acpi_dpc_port_get(pdev);
 	if (!edev) {
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 160d67c59310..3acf151ae015 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -115,7 +115,7 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
 
 	pci_save_state(dev);
 
-	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NEVER_SKIP |
+	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE |
 					   DPM_FLAG_SMART_SUSPEND);
 
 	if (pci_bridge_d3_possible(dev)) {
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index f2741c04289d..35158cfd9c1a 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -178,10 +178,9 @@ static int electra_cf_probe(struct platform_device *ofdev)
 	struct device_node *np = ofdev->dev.of_node;
 	struct electra_cf_socket   *cf;
 	struct resource mem, io;
-	int status;
+	int status = -ENOMEM;
 	const unsigned int *prop;
 	int err;
-	struct vm_struct *area;
 
 	err = of_address_to_resource(np, 0, &mem);
 	if (err)
@@ -202,30 +201,19 @@ static int electra_cf_probe(struct platform_device *ofdev)
 	cf->mem_phys = mem.start;
 	cf->mem_size = PAGE_ALIGN(resource_size(&mem));
 	cf->mem_base = ioremap(cf->mem_phys, cf->mem_size);
+	if (!cf->mem_base)
+		goto out_free_cf;
 	cf->io_size = PAGE_ALIGN(resource_size(&io));
-
-	area = __get_vm_area(cf->io_size, 0, PHB_IO_BASE, PHB_IO_END);
-	if (area == NULL) {
-		status = -ENOMEM;
-		goto fail1;
-	}
-
-	cf->io_virt = (void __iomem *)(area->addr);
+	cf->io_virt = ioremap_phb(io.start, cf->io_size);
+	if (!cf->io_virt)
+		goto out_unmap_mem;
 
 	cf->gpio_base = ioremap(0xfc103000, 0x1000);
+	if (!cf->gpio_base)
+		goto out_unmap_virt;
 	dev_set_drvdata(device, cf);
 
-	if (!cf->mem_base || !cf->io_virt || !cf->gpio_base ||
-	    (__ioremap_at(io.start, cf->io_virt, cf->io_size,
-			  pgprot_noncached(PAGE_KERNEL)) == NULL)) {
-		dev_err(device, "can't ioremap ranges\n");
-		status = -ENOMEM;
-		goto fail1;
-	}
-
-
 	cf->io_base = (unsigned long)cf->io_virt - VMALLOC_END;
-
 	cf->iomem.start = (unsigned long)cf->mem_base;
 	cf->iomem.end = (unsigned long)cf->mem_base + (mem.end - mem.start);
 	cf->iomem.flags = IORESOURCE_MEM;
@@ -305,14 +293,13 @@ static int electra_cf_probe(struct platform_device *ofdev)
 	if (cf->irq)
 		free_irq(cf->irq, cf);
 
-	if (cf->io_virt)
-		__iounmap_at(cf->io_virt, cf->io_size);
-	if (cf->mem_base)
-		iounmap(cf->mem_base);
-	if (cf->gpio_base)
-		iounmap(cf->gpio_base);
-	if (area)
-		device_init_wakeup(&ofdev->dev, 0);
+	iounmap(cf->gpio_base);
+out_unmap_virt:
+	device_init_wakeup(&ofdev->dev, 0);
+	iounmap(cf->io_virt);
+out_unmap_mem:
+	iounmap(cf->mem_base);
+out_free_cf:
 	kfree(cf);
 	return status;
 
@@ -330,7 +317,7 @@ static int electra_cf_remove(struct platform_device *ofdev)
 	free_irq(cf->irq, cf);
 	del_timer_sync(&cf->timer);
 
-	__iounmap_at(cf->io_virt, cf->io_size);
+	iounmap(cf->io_virt);
 	iounmap(cf->mem_base);
 	iounmap(cf->gpio_base);
 	release_mem_region(cf->mem_phys, cf->mem_size);
diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
index b72c04852599..0e0961a2b405 100644
--- a/drivers/perf/arm_spe_pmu.c
+++ b/drivers/perf/arm_spe_pmu.c
@@ -274,7 +274,7 @@ static u64 arm_spe_event_to_pmscr(struct perf_event *event)
 	if (!attr->exclude_kernel)
 		reg |= BIT(SYS_PMSCR_EL1_E1SPE_SHIFT);
 
-	if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && capable(CAP_SYS_ADMIN))
+	if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && perfmon_capable())
 		reg |= BIT(SYS_PMSCR_EL1_CX_SHIFT);
 
 	return reg;
@@ -700,7 +700,7 @@ static int arm_spe_pmu_event_init(struct perf_event *event)
 		return -EOPNOTSUPP;
 
 	reg = arm_spe_event_to_pmscr(event);
-	if (!capable(CAP_SYS_ADMIN) &&
+	if (!perfmon_capable() &&
 	    (reg & (BIT(SYS_PMSCR_EL1_PA_SHIFT) |
 		    BIT(SYS_PMSCR_EL1_CX_SHIFT) |
 		    BIT(SYS_PMSCR_EL1_PCT_SHIFT))))
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index c190406246ab..50cbcdce3680 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -2536,6 +2536,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8150-qmp-ufs-phy",
 		.data = &sm8150_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,sm8250-qmp-ufs-phy",
+		.data = &sm8150_ufsphy_cfg,
 	},
 	{ },
 };
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 3708d43b7508..393011a05b48 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -815,6 +815,13 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 	}, {
 		.compatible	= "qcom,msm8998-qusb2-phy",
 		.data		= &msm8998_phy_cfg,
+	}, {
+		/*
+		 * Deprecated. Only here to support legacy device
+		 * trees that didn't include "qcom,qusb2-v2-phy"
+		 */
+		.compatible	= "qcom,sdm845-qusb2-phy",
+		.data		= &qusb2_v2_phy_cfg,
 	}, {
 		.compatible	= "qcom,qusb2-v2-phy",
 		.data		= &qusb2_v2_phy_cfg,
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
index d998e65c89c8..a52a9bf13b75 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
@@ -160,18 +160,11 @@ static int qcom_snps_hsphy_power_on(struct phy *phy)
 	ret = regulator_bulk_enable(VREG_NUM, priv->vregs);
 	if (ret)
 		return ret;
-	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
-	if (ret)
-		goto err_disable_regulator;
+
 	qcom_snps_hsphy_disable_hv_interrupts(priv);
 	qcom_snps_hsphy_exit_retention(priv);
 
 	return 0;
-
-err_disable_regulator:
-	regulator_bulk_disable(VREG_NUM, priv->vregs);
-
-	return ret;
 }
 
 static int qcom_snps_hsphy_power_off(struct phy *phy)
@@ -180,7 +173,6 @@ static int qcom_snps_hsphy_power_off(struct phy *phy)
 
 	qcom_snps_hsphy_enter_retention(priv);
 	qcom_snps_hsphy_enable_hv_interrupts(priv);
-	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
 	regulator_bulk_disable(VREG_NUM, priv->vregs);
 
 	return 0;
@@ -266,21 +258,39 @@ static int qcom_snps_hsphy_init(struct phy *phy)
 	struct hsphy_priv *priv = phy_get_drvdata(phy);
 	int ret;
 
-	ret = qcom_snps_hsphy_reset(priv);
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
 	if (ret)
 		return ret;
 
+	ret = qcom_snps_hsphy_reset(priv);
+	if (ret)
+		goto disable_clocks;
+
 	qcom_snps_hsphy_init_sequence(priv);
 
 	ret = qcom_snps_hsphy_por_reset(priv);
 	if (ret)
-		return ret;
+		goto disable_clocks;
+
+	return 0;
+
+disable_clocks:
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	return ret;
+}
+
+static int qcom_snps_hsphy_exit(struct phy *phy)
+{
+	struct hsphy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
 
 	return 0;
 }
 
 static const struct phy_ops qcom_snps_hsphy_ops = {
 	.init = qcom_snps_hsphy_init,
+	.exit = qcom_snps_hsphy_exit,
 	.power_on = qcom_snps_hsphy_power_on,
 	.power_off = qcom_snps_hsphy_power_off,
 	.set_mode = qcom_snps_hsphy_set_mode,
diff --git a/drivers/phy/samsung/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
index 2c1a7d71142b..77fb23bc218f 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.h
+++ b/drivers/phy/samsung/phy-samsung-usb2.h
@@ -43,7 +43,7 @@ struct samsung_usb2_phy_driver {
 	struct regmap *reg_pmu;
 	struct regmap *reg_sys;
 	spinlock_t lock;
-	struct samsung_usb2_phy_instance instances[0];
+	struct samsung_usb2_phy_instance instances[];
 };
 
 struct samsung_usb2_common_phy {
diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
index 7b51045df783..1d12d1b1b63a 100644
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -20,6 +20,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset-controller.h>
+#include <dt-bindings/phy/phy.h>
 
 #define WIZ_SERDES_CTRL		0x404
 #define WIZ_SERDES_TOP_CTRL	0x408
@@ -78,6 +79,8 @@ static const struct reg_field p_enable[WIZ_MAX_LANES] = {
 	REG_FIELD(WIZ_LANECTL(3), 30, 31),
 };
 
+enum p_enable { P_ENABLE = 2, P_ENABLE_FORCE = 1, P_ENABLE_DISABLE = 0 };
+
 static const struct reg_field p_align[WIZ_MAX_LANES] = {
 	REG_FIELD(WIZ_LANECTL(0), 29, 29),
 	REG_FIELD(WIZ_LANECTL(1), 29, 29),
@@ -220,6 +223,7 @@ struct wiz {
 	struct reset_controller_dev wiz_phy_reset_dev;
 	struct gpio_desc	*gpio_typec_dir;
 	int			typec_dir_delay;
+	u32 lane_phy_type[WIZ_MAX_LANES];
 };
 
 static int wiz_reset(struct wiz *wiz)
@@ -242,12 +246,17 @@ static int wiz_reset(struct wiz *wiz)
 static int wiz_mode_select(struct wiz *wiz)
 {
 	u32 num_lanes = wiz->num_lanes;
+	enum wiz_lane_standard_mode mode;
 	int ret;
 	int i;
 
 	for (i = 0; i < num_lanes; i++) {
-		ret = regmap_field_write(wiz->p_standard_mode[i],
-					 LANE_MODE_GEN4);
+		if (wiz->lane_phy_type[i] == PHY_TYPE_DP)
+			mode = LANE_MODE_GEN1;
+		else
+			mode = LANE_MODE_GEN4;
+
+		ret = regmap_field_write(wiz->p_standard_mode[i], mode);
 		if (ret)
 			return ret;
 	}
@@ -707,7 +716,7 @@ static int wiz_phy_reset_assert(struct reset_controller_dev *rcdev,
 		return ret;
 	}
 
-	ret = regmap_field_write(wiz->p_enable[id - 1], false);
+	ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE_DISABLE);
 	return ret;
 }
 
@@ -734,7 +743,11 @@ static int wiz_phy_reset_deassert(struct reset_controller_dev *rcdev,
 		return ret;
 	}
 
-	ret = regmap_field_write(wiz->p_enable[id - 1], true);
+	if (wiz->lane_phy_type[id - 1] == PHY_TYPE_DP)
+		ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE);
+	else
+		ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE_FORCE);
+
 	return ret;
 }
 
@@ -761,6 +774,40 @@ static const struct of_device_id wiz_id_table[] = {
 };
 MODULE_DEVICE_TABLE(of, wiz_id_table);
 
+static int wiz_get_lane_phy_types(struct device *dev, struct wiz *wiz)
+{
+	struct device_node *serdes, *subnode;
+
+	serdes = of_get_child_by_name(dev->of_node, "serdes");
+	if (!serdes) {
+		dev_err(dev, "%s: Getting \"serdes\"-node failed\n", __func__);
+		return -EINVAL;
+	}
+
+	for_each_child_of_node(serdes, subnode) {
+		u32 reg, num_lanes = 1, phy_type = PHY_NONE;
+		int ret, i;
+
+		ret = of_property_read_u32(subnode, "reg", &reg);
+		if (ret) {
+			dev_err(dev,
+				"%s: Reading \"reg\" from \"%s\" failed: %d\n",
+				__func__, subnode->name, ret);
+			return ret;
+		}
+		of_property_read_u32(subnode, "cdns,num-lanes", &num_lanes);
+		of_property_read_u32(subnode, "cdns,phy-type", &phy_type);
+
+		dev_dbg(dev, "%s: Lanes %u-%u have phy-type %u\n", __func__,
+			reg, reg + num_lanes - 1, phy_type);
+
+		for (i = reg; i < reg + num_lanes; i++)
+			wiz->lane_phy_type[i] = phy_type;
+	}
+
+	return 0;
+}
+
 static int wiz_probe(struct platform_device *pdev)
 {
 	struct reset_controller_dev *phy_reset_dev;
@@ -844,6 +891,10 @@ static int wiz_probe(struct platform_device *pdev)
 		}
 	}
 
+	ret = wiz_get_lane_phy_types(dev, wiz);
+	if (ret)
+		return ret;
+
 	wiz->dev = dev;
 	wiz->regmap = regmap;
 	wiz->num_lanes = num_lanes;
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 834c59950d1c..f646f070d98f 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -172,15 +172,22 @@ config PINCTRL_GEMINI
 	select GENERIC_PINCONF
 	select MFD_SYSCON
 
+config PINCTRL_MCP23S08_I2C
+	tristate
+	select REGMAP_I2C
+
+config PINCTRL_MCP23S08_SPI
+	tristate
+	select REGMAP_SPI
+
 config PINCTRL_MCP23S08
 	tristate "Microchip MCP23xxx I/O expander"
 	depends on SPI_MASTER || I2C
-	depends on I2C || I2C=n
 	select GPIOLIB
 	select GPIOLIB_IRQCHIP
-	select REGMAP_I2C if I2C
-	select REGMAP_SPI if SPI_MASTER
 	select GENERIC_PINCONF
+	select PINCTRL_MCP23S08_I2C if I2C
+	select PINCTRL_MCP23S08_SPI if SPI_MASTER
 	help
 	  SPI/I2C driver for Microchip MCP23S08 / MCP23S17 / MCP23S18 /
 	  MCP23008 / MCP23017 / MCP23018 I/O expanders.
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 0b36a1cfca8a..1731b2154df9 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -21,6 +21,8 @@ obj-$(CONFIG_PINCTRL_DIGICOLOR)	+= pinctrl-digicolor.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_GEMINI)	+= pinctrl-gemini.o
 obj-$(CONFIG_PINCTRL_MAX77620)	+= pinctrl-max77620.o
+obj-$(CONFIG_PINCTRL_MCP23S08_I2C)	+= pinctrl-mcp23s08_i2c.o
+obj-$(CONFIG_PINCTRL_MCP23S08_SPI)	+= pinctrl-mcp23s08_spi.o
 obj-$(CONFIG_PINCTRL_MCP23S08)	+= pinctrl-mcp23s08.o
 obj-$(CONFIG_PINCTRL_MESON)	+= meson/
 obj-$(CONFIG_PINCTRL_OXNAS)	+= pinctrl-oxnas.o
diff --git a/drivers/pinctrl/actions/pinctrl-s700.c b/drivers/pinctrl/actions/pinctrl-s700.c
index 47a4ccd9fed4..f579a6593f37 100644
--- a/drivers/pinctrl/actions/pinctrl-s700.c
+++ b/drivers/pinctrl/actions/pinctrl-s700.c
@@ -1435,7 +1435,7 @@ static const char * const sd2_groups[] = {
 static const char * const i2c0_groups[] = {
 	"uart0_rx_mfp",
 	"uart0_tx_mfp",
-	"i2c0_mfp_mfp",
+	"i2c0_mfp",
 };
 
 static const char * const i2c1_groups[] = {
diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index c784663b00ad..4ca44dd69e53 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -165,6 +165,13 @@ config PINCTRL_IMX8QXP
 	help
 	  Say Y here to enable the imx8qxp pinctrl driver
 
+config PINCTRL_IMX8DXL
+	bool "IMX8DXL pinctrl driver"
+	depends on IMX_SCU && ARCH_MXC && ARM64
+	select PINCTRL_IMX_SCU
+	help
+	  Say Y here to enable the imx8dxl pinctrl driver
+
 config PINCTRL_VF610
 	bool "Freescale Vybrid VF610 pinctrl driver"
 	depends on SOC_VF610
diff --git a/drivers/pinctrl/freescale/Makefile b/drivers/pinctrl/freescale/Makefile
index 0ebd3af21e4d..c61722565289 100644
--- a/drivers/pinctrl/freescale/Makefile
+++ b/drivers/pinctrl/freescale/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_PINCTRL_IMX8MP)	+= pinctrl-imx8mp.o
 obj-$(CONFIG_PINCTRL_IMX8MQ)	+= pinctrl-imx8mq.o
 obj-$(CONFIG_PINCTRL_IMX8QM)	+= pinctrl-imx8qm.o
 obj-$(CONFIG_PINCTRL_IMX8QXP)	+= pinctrl-imx8qxp.o
+obj-$(CONFIG_PINCTRL_IMX8DXL)	+= pinctrl-imx8dxl.o
 obj-$(CONFIG_PINCTRL_VF610)	+= pinctrl-vf610.o
 obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
diff --git a/drivers/pinctrl/freescale/pinctrl-imx1-core.c b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
index c00d0022d311..0c1c0e72fa8e 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx1-core.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
@@ -60,7 +60,7 @@ struct imx1_pinctrl {
 
 /*
  * IMX1 IOMUXC manages the pins based on ports. Each port has 32 pins. IOMUX
- * control register are seperated into function, output configuration, input
+ * control registers are separated into function, output configuration, input
  * configuration A, input configuration B, GPIO in use and data direction.
  *
  * Those controls that are represented by 1 bit have a direct mapping between
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8dxl.c b/drivers/pinctrl/freescale/pinctrl-imx8dxl.c
new file mode 100644
index 000000000000..7f32e57b7f6a
--- /dev/null
+++ b/drivers/pinctrl/freescale/pinctrl-imx8dxl.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019~2020 NXP
+ */
+
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <linux/err.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+static const struct pinctrl_pin_desc imx8dxl_pinctrl_pads[] = {
+	IMX_PINCTRL_PIN(IMX8DXL_PCIE_CTRL0_PERST_B),
+	IMX_PINCTRL_PIN(IMX8DXL_PCIE_CTRL0_CLKREQ_B),
+	IMX_PINCTRL_PIN(IMX8DXL_PCIE_CTRL0_WAKE_B),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_PCIESEP),
+	IMX_PINCTRL_PIN(IMX8DXL_USB_SS3_TC0),
+	IMX_PINCTRL_PIN(IMX8DXL_USB_SS3_TC1),
+	IMX_PINCTRL_PIN(IMX8DXL_USB_SS3_TC2),
+	IMX_PINCTRL_PIN(IMX8DXL_USB_SS3_TC3),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_3V3_USB3IO),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_CLK),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_CMD),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_DATA0),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_DATA1),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_DATA2),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_DATA3),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_DATA4),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_DATA5),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_DATA6),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_DATA7),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_STROBE),
+	IMX_PINCTRL_PIN(IMX8DXL_EMMC0_RESET_B),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_SD1FIX0),
+	IMX_PINCTRL_PIN(IMX8DXL_USDHC1_RESET_B),
+	IMX_PINCTRL_PIN(IMX8DXL_USDHC1_VSELECT),
+	IMX_PINCTRL_PIN(IMX8DXL_CTL_NAND_RE_P_N),
+	IMX_PINCTRL_PIN(IMX8DXL_USDHC1_WP),
+	IMX_PINCTRL_PIN(IMX8DXL_USDHC1_CD_B),
+	IMX_PINCTRL_PIN(IMX8DXL_CTL_NAND_DQS_P_N),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_VSELSEP),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_TXC),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_TX_CTL),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_TXD0),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_TXD1),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_TXD2),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_TXD3),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_RXC),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_RX_CTL),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_RXD0),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_RXD1),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_RXD2),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_RGMII_RXD3),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_REFCLK_125M_25M),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_MDIO),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET0_MDC),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIOCT),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_TXC),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_TXD2),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_TX_CTL),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_TXD3),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_RXC),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_RXD3),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_RXD2),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_RXD1),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_TXD0),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_TXD1),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_RXD0),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_RGMII_RX_CTL),
+	IMX_PINCTRL_PIN(IMX8DXL_ENET1_REFCLK_125M_25M),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI3_SCK),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI3_SDO),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI3_SDI),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI3_CS0),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI3_CS1),
+	IMX_PINCTRL_PIN(IMX8DXL_MCLK_IN1),
+	IMX_PINCTRL_PIN(IMX8DXL_MCLK_IN0),
+	IMX_PINCTRL_PIN(IMX8DXL_MCLK_OUT0),
+	IMX_PINCTRL_PIN(IMX8DXL_UART1_TX),
+	IMX_PINCTRL_PIN(IMX8DXL_UART1_RX),
+	IMX_PINCTRL_PIN(IMX8DXL_UART1_RTS_B),
+	IMX_PINCTRL_PIN(IMX8DXL_UART1_CTS_B),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI0_SCK),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI0_SDI),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI0_SDO),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI0_CS1),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI0_CS0),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHT),
+	IMX_PINCTRL_PIN(IMX8DXL_ADC_IN1),
+	IMX_PINCTRL_PIN(IMX8DXL_ADC_IN0),
+	IMX_PINCTRL_PIN(IMX8DXL_ADC_IN3),
+	IMX_PINCTRL_PIN(IMX8DXL_ADC_IN2),
+	IMX_PINCTRL_PIN(IMX8DXL_ADC_IN5),
+	IMX_PINCTRL_PIN(IMX8DXL_ADC_IN4),
+	IMX_PINCTRL_PIN(IMX8DXL_FLEXCAN0_RX),
+	IMX_PINCTRL_PIN(IMX8DXL_FLEXCAN0_TX),
+	IMX_PINCTRL_PIN(IMX8DXL_FLEXCAN1_RX),
+	IMX_PINCTRL_PIN(IMX8DXL_FLEXCAN1_TX),
+	IMX_PINCTRL_PIN(IMX8DXL_FLEXCAN2_RX),
+	IMX_PINCTRL_PIN(IMX8DXL_FLEXCAN2_TX),
+	IMX_PINCTRL_PIN(IMX8DXL_UART0_RX),
+	IMX_PINCTRL_PIN(IMX8DXL_UART0_TX),
+	IMX_PINCTRL_PIN(IMX8DXL_UART2_TX),
+	IMX_PINCTRL_PIN(IMX8DXL_UART2_RX),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIOLH),
+	IMX_PINCTRL_PIN(IMX8DXL_JTAG_TRST_B),
+	IMX_PINCTRL_PIN(IMX8DXL_PMIC_I2C_SCL),
+	IMX_PINCTRL_PIN(IMX8DXL_PMIC_I2C_SDA),
+	IMX_PINCTRL_PIN(IMX8DXL_PMIC_INT_B),
+	IMX_PINCTRL_PIN(IMX8DXL_SCU_GPIO0_00),
+	IMX_PINCTRL_PIN(IMX8DXL_SCU_GPIO0_01),
+	IMX_PINCTRL_PIN(IMX8DXL_SCU_PMIC_STANDBY),
+	IMX_PINCTRL_PIN(IMX8DXL_SCU_BOOT_MODE1),
+	IMX_PINCTRL_PIN(IMX8DXL_SCU_BOOT_MODE0),
+	IMX_PINCTRL_PIN(IMX8DXL_SCU_BOOT_MODE2),
+	IMX_PINCTRL_PIN(IMX8DXL_SNVS_TAMPER_OUT1),
+	IMX_PINCTRL_PIN(IMX8DXL_SNVS_TAMPER_OUT2),
+	IMX_PINCTRL_PIN(IMX8DXL_SNVS_TAMPER_OUT3),
+	IMX_PINCTRL_PIN(IMX8DXL_SNVS_TAMPER_OUT4),
+	IMX_PINCTRL_PIN(IMX8DXL_SNVS_TAMPER_IN0),
+	IMX_PINCTRL_PIN(IMX8DXL_SNVS_TAMPER_IN1),
+	IMX_PINCTRL_PIN(IMX8DXL_SNVS_TAMPER_IN2),
+	IMX_PINCTRL_PIN(IMX8DXL_SNVS_TAMPER_IN3),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI1_SCK),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI1_SDO),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI1_SDI),
+	IMX_PINCTRL_PIN(IMX8DXL_SPI1_CS0),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHD),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0A_DATA1),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0A_DATA0),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0A_DATA3),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0A_DATA2),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0A_SS0_B),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0A_DQS),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0A_SCLK),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_QSPI0A),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0B_SCLK),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0B_DQS),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0B_DATA1),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0B_DATA0),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0B_DATA3),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0B_DATA2),
+	IMX_PINCTRL_PIN(IMX8DXL_QSPI0B_SS0_B),
+	IMX_PINCTRL_PIN(IMX8DXL_COMP_CTL_GPIO_1V8_3V3_QSPI0B)
+};
+
+
+static struct imx_pinctrl_soc_info imx8dxl_pinctrl_info = {
+	.pins = imx8dxl_pinctrl_pads,
+	.npins = ARRAY_SIZE(imx8dxl_pinctrl_pads),
+	.flags = IMX_USE_SCU,
+};
+
+static const struct of_device_id imx8dxl_pinctrl_of_match[] = {
+	{ .compatible = "fsl,imx8dxl-iomuxc", },
+	{ /* sentinel */ }
+};
+
+static int imx8dxl_pinctrl_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = imx_pinctrl_sc_ipc_init(pdev);
+	if (ret)
+		return ret;
+
+	return imx_pinctrl_probe(pdev, &imx8dxl_pinctrl_info);
+}
+
+static struct platform_driver imx8dxl_pinctrl_driver = {
+	.driver = {
+		.name = "fsl,imx8dxl-iomuxc",
+		.of_match_table = of_match_ptr(imx8dxl_pinctrl_of_match),
+		.suppress_bind_attrs = true,
+	},
+	.probe = imx8dxl_pinctrl_probe,
+};
+
+static int __init imx8dxl_pinctrl_init(void)
+{
+	return platform_driver_register(&imx8dxl_pinctrl_driver);
+}
+arch_initcall(imx8dxl_pinctrl_init);
diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig
index ee440ec4c94c..787833e343a4 100644
--- a/drivers/pinctrl/intel/Kconfig
+++ b/drivers/pinctrl/intel/Kconfig
@@ -111,6 +111,14 @@ config PINCTRL_ICELAKE
 	  This pinctrl driver provides an interface that allows configuring
 	  of Intel Ice Lake PCH pins and using them as GPIOs.
 
+config PINCTRL_JASPERLAKE
+	tristate "Intel Jasper Lake PCH pinctrl and GPIO driver"
+	depends on ACPI
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Jasper Lake PCH pins and using them as GPIOs.
+
 config PINCTRL_LEWISBURG
 	tristate "Intel Lewisburg pinctrl and GPIO driver"
 	depends on ACPI
diff --git a/drivers/pinctrl/intel/Makefile b/drivers/pinctrl/intel/Makefile
index f60f99cfa7aa..f6f63eb8100f 100644
--- a/drivers/pinctrl/intel/Makefile
+++ b/drivers/pinctrl/intel/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_PINCTRL_CEDARFORK)		+= pinctrl-cedarfork.o
 obj-$(CONFIG_PINCTRL_DENVERTON)		+= pinctrl-denverton.o
 obj-$(CONFIG_PINCTRL_GEMINILAKE)	+= pinctrl-geminilake.o
 obj-$(CONFIG_PINCTRL_ICELAKE)		+= pinctrl-icelake.o
+obj-$(CONFIG_PINCTRL_JASPERLAKE)	+= pinctrl-jasperlake.o
 obj-$(CONFIG_PINCTRL_LEWISBURG)		+= pinctrl-lewisburg.o
 obj-$(CONFIG_PINCTRL_SUNRISEPOINT)	+= pinctrl-sunrisepoint.o
 obj-$(CONFIG_PINCTRL_TIGERLAKE)		+= pinctrl-tigerlake.o
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index b409642f168d..0ff7c55173da 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1286,6 +1286,7 @@ static const struct gpio_chip byt_gpio_chip = {
 	.direction_output	= byt_gpio_direction_output,
 	.get			= byt_gpio_get,
 	.set			= byt_gpio_set,
+	.set_config		= gpiochip_generic_config,
 	.dbg_show		= byt_gpio_dbg_show,
 };
 
@@ -1505,8 +1506,7 @@ static int byt_gpio_probe(struct intel_pinctrl *vg)
 {
 	struct platform_device *pdev = to_platform_device(vg->dev);
 	struct gpio_chip *gc;
-	struct resource *irq_rc;
-	int ret;
+	int irq, ret;
 
 	/* Set up gpio chip */
 	vg->chip	= byt_gpio_chip;
@@ -1526,8 +1526,8 @@ static int byt_gpio_probe(struct intel_pinctrl *vg)
 #endif
 
 	/* set up interrupts  */
-	irq_rc = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (irq_rc && irq_rc->start) {
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq > 0) {
 		struct gpio_irq_chip *girq;
 
 		vg->irqchip.name = "BYT-GPIO",
@@ -1547,7 +1547,7 @@ static int byt_gpio_probe(struct intel_pinctrl *vg)
 					     sizeof(*girq->parents), GFP_KERNEL);
 		if (!girq->parents)
 			return -ENOMEM;
-		girq->parents[0] = (unsigned int)irq_rc->start;
+		girq->parents[0] = irq;
 		girq->default_type = IRQ_TYPE_NONE;
 		girq->handler = handle_bad_irq;
 	}
diff --git a/drivers/pinctrl/intel/pinctrl-cannonlake.c b/drivers/pinctrl/intel/pinctrl-cannonlake.c
index f51b27bbf9f1..515f57a0d180 100644
--- a/drivers/pinctrl/intel/pinctrl-cannonlake.c
+++ b/drivers/pinctrl/intel/pinctrl-cannonlake.c
@@ -30,8 +30,6 @@
 		.gpio_base = (g),			\
 	}
 
-#define CNL_NO_GPIO	-1
-
 #define CNL_COMMUNITY(b, s, e, o, g)			\
 	{						\
 		.barno = (b),				\
@@ -377,27 +375,27 @@ static const struct intel_padgroup cnlh_community0_gpps[] = {
 };
 
 static const struct intel_padgroup cnlh_community1_gpps[] = {
-	CNL_GPP(0, 51, 74, 64),			/* GPP_C */
-	CNL_GPP(1, 75, 98, 96),			/* GPP_D */
-	CNL_GPP(2, 99, 106, 128),		/* GPP_G */
-	CNL_GPP(3, 107, 114, CNL_NO_GPIO),	/* AZA */
-	CNL_GPP(4, 115, 146, 160),		/* vGPIO_0 */
-	CNL_GPP(5, 147, 154, CNL_NO_GPIO),	/* vGPIO_1 */
+	CNL_GPP(0, 51, 74, 64),				/* GPP_C */
+	CNL_GPP(1, 75, 98, 96),				/* GPP_D */
+	CNL_GPP(2, 99, 106, 128),			/* GPP_G */
+	CNL_GPP(3, 107, 114, INTEL_GPIO_BASE_NOMAP),	/* AZA */
+	CNL_GPP(4, 115, 146, 160),			/* vGPIO_0 */
+	CNL_GPP(5, 147, 154, INTEL_GPIO_BASE_NOMAP),	/* vGPIO_1 */
 };
 
 static const struct intel_padgroup cnlh_community3_gpps[] = {
-	CNL_GPP(0, 155, 178, 192),		/* GPP_K */
-	CNL_GPP(1, 179, 202, 224),		/* GPP_H */
-	CNL_GPP(2, 203, 215, 256),		/* GPP_E */
-	CNL_GPP(3, 216, 239, 288),		/* GPP_F */
-	CNL_GPP(4, 240, 248, CNL_NO_GPIO),	/* SPI */
+	CNL_GPP(0, 155, 178, 192),			/* GPP_K */
+	CNL_GPP(1, 179, 202, 224),			/* GPP_H */
+	CNL_GPP(2, 203, 215, 256),			/* GPP_E */
+	CNL_GPP(3, 216, 239, 288),			/* GPP_F */
+	CNL_GPP(4, 240, 248, INTEL_GPIO_BASE_NOMAP),	/* SPI */
 };
 
 static const struct intel_padgroup cnlh_community4_gpps[] = {
-	CNL_GPP(0, 249, 259, CNL_NO_GPIO),	/* CPU */
-	CNL_GPP(1, 260, 268, CNL_NO_GPIO),	/* JTAG */
-	CNL_GPP(2, 269, 286, 320),		/* GPP_I */
-	CNL_GPP(3, 287, 298, 352),		/* GPP_J */
+	CNL_GPP(0, 249, 259, INTEL_GPIO_BASE_NOMAP),	/* CPU */
+	CNL_GPP(1, 260, 268, INTEL_GPIO_BASE_NOMAP),	/* JTAG */
+	CNL_GPP(2, 269, 286, 320),			/* GPP_I */
+	CNL_GPP(3, 287, 298, 352),			/* GPP_J */
 };
 
 static const unsigned int cnlh_spi0_pins[] = { 40, 41, 42, 43 };
@@ -790,25 +788,25 @@ static const struct intel_function cnllp_functions[] = {
 };
 
 static const struct intel_padgroup cnllp_community0_gpps[] = {
-	CNL_GPP(0, 0, 24, 0),			/* GPP_A */
-	CNL_GPP(1, 25, 50, 32),			/* GPP_B */
-	CNL_GPP(2, 51, 58, 64),			/* GPP_G */
-	CNL_GPP(3, 59, 67, CNL_NO_GPIO),	/* SPI */
+	CNL_GPP(0, 0, 24, 0),				/* GPP_A */
+	CNL_GPP(1, 25, 50, 32),				/* GPP_B */
+	CNL_GPP(2, 51, 58, 64),				/* GPP_G */
+	CNL_GPP(3, 59, 67, INTEL_GPIO_BASE_NOMAP),	/* SPI */
 };
 
 static const struct intel_padgroup cnllp_community1_gpps[] = {
-	CNL_GPP(0, 68, 92, 96),			/* GPP_D */
-	CNL_GPP(1, 93, 116, 128),		/* GPP_F */
-	CNL_GPP(2, 117, 140, 160),		/* GPP_H */
-	CNL_GPP(3, 141, 172, 192),		/* vGPIO */
-	CNL_GPP(4, 173, 180, 224),		/* vGPIO */
+	CNL_GPP(0, 68, 92, 96),				/* GPP_D */
+	CNL_GPP(1, 93, 116, 128),			/* GPP_F */
+	CNL_GPP(2, 117, 140, 160),			/* GPP_H */
+	CNL_GPP(3, 141, 172, 192),			/* vGPIO */
+	CNL_GPP(4, 173, 180, 224),			/* vGPIO */
 };
 
 static const struct intel_padgroup cnllp_community4_gpps[] = {
-	CNL_GPP(0, 181, 204, 256),		/* GPP_C */
-	CNL_GPP(1, 205, 228, 288),		/* GPP_E */
-	CNL_GPP(2, 229, 237, CNL_NO_GPIO),	/* JTAG */
-	CNL_GPP(3, 238, 243, CNL_NO_GPIO),	/* HVCMOS */
+	CNL_GPP(0, 181, 204, 256),			/* GPP_C */
+	CNL_GPP(1, 205, 228, 288),			/* GPP_E */
+	CNL_GPP(2, 229, 237, INTEL_GPIO_BASE_NOMAP),	/* JTAG */
+	CNL_GPP(3, 238, 243, INTEL_GPIO_BASE_NOMAP),	/* HVCMOS */
 };
 
 static const struct intel_community cnllp_communities[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index 4c74fdde576d..8e3953a223d0 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -35,18 +35,18 @@
 
 #define CHV_PADCTRL0			0x000
 #define CHV_PADCTRL0_INTSEL_SHIFT	28
-#define CHV_PADCTRL0_INTSEL_MASK	(0xf << CHV_PADCTRL0_INTSEL_SHIFT)
+#define CHV_PADCTRL0_INTSEL_MASK	GENMASK(31, 28)
 #define CHV_PADCTRL0_TERM_UP		BIT(23)
 #define CHV_PADCTRL0_TERM_SHIFT		20
-#define CHV_PADCTRL0_TERM_MASK		(7 << CHV_PADCTRL0_TERM_SHIFT)
+#define CHV_PADCTRL0_TERM_MASK		GENMASK(22, 20)
 #define CHV_PADCTRL0_TERM_20K		1
 #define CHV_PADCTRL0_TERM_5K		2
 #define CHV_PADCTRL0_TERM_1K		4
 #define CHV_PADCTRL0_PMODE_SHIFT	16
-#define CHV_PADCTRL0_PMODE_MASK		(0xf << CHV_PADCTRL0_PMODE_SHIFT)
+#define CHV_PADCTRL0_PMODE_MASK		GENMASK(19, 16)
 #define CHV_PADCTRL0_GPIOEN		BIT(15)
 #define CHV_PADCTRL0_GPIOCFG_SHIFT	8
-#define CHV_PADCTRL0_GPIOCFG_MASK	(7 << CHV_PADCTRL0_GPIOCFG_SHIFT)
+#define CHV_PADCTRL0_GPIOCFG_MASK	GENMASK(10, 8)
 #define CHV_PADCTRL0_GPIOCFG_GPIO	0
 #define CHV_PADCTRL0_GPIOCFG_GPO	1
 #define CHV_PADCTRL0_GPIOCFG_GPI	2
@@ -57,57 +57,16 @@
 #define CHV_PADCTRL1			0x004
 #define CHV_PADCTRL1_CFGLOCK		BIT(31)
 #define CHV_PADCTRL1_INVRXTX_SHIFT	4
-#define CHV_PADCTRL1_INVRXTX_MASK	(0xf << CHV_PADCTRL1_INVRXTX_SHIFT)
-#define CHV_PADCTRL1_INVRXTX_TXENABLE	(2 << CHV_PADCTRL1_INVRXTX_SHIFT)
+#define CHV_PADCTRL1_INVRXTX_MASK	GENMASK(7, 4)
+#define CHV_PADCTRL1_INVRXTX_RXDATA	BIT(6)
+#define CHV_PADCTRL1_INVRXTX_TXENABLE	BIT(5)
 #define CHV_PADCTRL1_ODEN		BIT(3)
-#define CHV_PADCTRL1_INVRXTX_RXDATA	(4 << CHV_PADCTRL1_INVRXTX_SHIFT)
-#define CHV_PADCTRL1_INTWAKECFG_MASK	7
+#define CHV_PADCTRL1_INTWAKECFG_MASK	GENMASK(2, 0)
 #define CHV_PADCTRL1_INTWAKECFG_FALLING	1
 #define CHV_PADCTRL1_INTWAKECFG_RISING	2
 #define CHV_PADCTRL1_INTWAKECFG_BOTH	3
 #define CHV_PADCTRL1_INTWAKECFG_LEVEL	4
 
-/**
- * struct chv_alternate_function - A per group or per pin alternate function
- * @pin: Pin number (only used in per pin configs)
- * @mode: Mode the pin should be set in
- * @invert_oe: Invert OE for this pin
- */
-struct chv_alternate_function {
-	unsigned int pin;
-	u8 mode;
-	bool invert_oe;
-};
-
-/**
- * struct chv_pincgroup - describes a CHV pin group
- * @name: Name of the group
- * @pins: An array of pins in this group
- * @npins: Number of pins in this group
- * @altfunc: Alternate function applied to all pins in this group
- * @overrides: Alternate function override per pin or %NULL if not used
- * @noverrides: Number of per pin alternate function overrides if
- *              @overrides != NULL.
- */
-struct chv_pingroup {
-	const char *name;
-	const unsigned int *pins;
-	size_t npins;
-	struct chv_alternate_function altfunc;
-	const struct chv_alternate_function *overrides;
-	size_t noverrides;
-};
-
-/**
- * struct chv_gpio_pinrange - A range of pins that can be used as GPIOs
- * @base: Start pin number
- * @npins: Number of pins in this range
- */
-struct chv_gpio_pinrange {
-	unsigned int base;
-	unsigned int npins;
-};
-
 /**
  * struct chv_community - A community specific configuration
  * @uid: ACPI _UID used to match the community
@@ -117,8 +76,8 @@ struct chv_gpio_pinrange {
  * @ngroups: Number of groups
  * @functions: All functions in this community
  * @nfunctions: Number of functions
- * @gpio_ranges: An array of GPIO ranges in this community
- * @ngpio_ranges: Number of GPIO ranges
+ * @gpps: Pad groups
+ * @ngpps: Number of pad groups in this community
  * @nirqs: Total number of IRQs this community can generate
  * @acpi_space_id: An address space ID for ACPI OpRegion handler
  */
@@ -126,12 +85,12 @@ struct chv_community {
 	const char *uid;
 	const struct pinctrl_pin_desc *pins;
 	size_t npins;
-	const struct chv_pingroup *groups;
+	const struct intel_pingroup *groups;
 	size_t ngroups;
 	const struct intel_function *functions;
 	size_t nfunctions;
-	const struct chv_gpio_pinrange *gpio_ranges;
-	size_t ngpio_ranges;
+	const struct intel_padgroup *gpps;
+	size_t ngpps;
 	size_t nirqs;
 	acpi_adr_space_type acpi_space_id;
 };
@@ -173,37 +132,14 @@ struct chv_pinctrl {
 	struct chv_pin_context *saved_pin_context;
 };
 
-#define ALTERNATE_FUNCTION(p, m, i)		\
-	{					\
-		.pin = (p),			\
-		.mode = (m),			\
-		.invert_oe = (i),		\
-	}
-
-#define PIN_GROUP_WITH_ALT(n, p, m, i)		\
-	{					\
-		.name = (n),			\
-		.pins = (p),			\
-		.npins = ARRAY_SIZE((p)),	\
-		.altfunc.mode = (m),		\
-		.altfunc.invert_oe = (i),	\
-	}
+#define	PINMODE_INVERT_OE	BIT(15)
 
-#define PIN_GROUP_WITH_OVERRIDE(n, p, m, i, o)	\
-	{					\
-		.name = (n),			\
-		.pins = (p),			\
-		.npins = ARRAY_SIZE((p)),	\
-		.altfunc.mode = (m),		\
-		.altfunc.invert_oe = (i),	\
-		.overrides = (o),		\
-		.noverrides = ARRAY_SIZE((o)),	\
-	}
+#define PINMODE(m, i)		((m) | ((i) * PINMODE_INVERT_OE))
 
-#define GPIO_PINRANGE(start, end)		\
+#define CHV_GPP(start, end)		\
 	{					\
 		.base = (start),		\
-		.npins = (end) - (start) + 1,	\
+		.size = (end) - (start) + 1,	\
 	}
 
 static const struct pinctrl_pin_desc southwest_pins[] = {
@@ -288,40 +224,37 @@ static const unsigned southwest_i2c6_pins[] = { 47, 51 };
 static const unsigned southwest_i2c_nfc_pins[] = { 49, 52 };
 static const unsigned southwest_spi3_pins[] = { 76, 79, 80, 81, 82 };
 
-/* LPE I2S TXD pins need to have invert_oe set */
-static const struct chv_alternate_function southwest_lpe_altfuncs[] = {
-	ALTERNATE_FUNCTION(30, 1, true),
-	ALTERNATE_FUNCTION(34, 1, true),
-	ALTERNATE_FUNCTION(97, 1, true),
+/* Some of LPE I2S TXD pins need to have OE inversion set */
+static const unsigned int southwest_lpe_altfuncs[] = {
+	PINMODE(1, 1), PINMODE(1, 0), PINMODE(1, 0), PINMODE(1, 0), /* 30, 31, 32, 33 */
+	PINMODE(1, 1), PINMODE(1, 0), PINMODE(1, 0), PINMODE(1, 0), /* 34, 35, 36, 37 */
+	PINMODE(1, 0), PINMODE(1, 0), PINMODE(1, 0), PINMODE(1, 1), /* 92, 94, 96, 97 */
 };
 
 /*
  * Two spi3 chipselects are available in different mode than the main spi3
- * functionality, which is using mode 1.
+ * functionality, which is using mode 2.
  */
-static const struct chv_alternate_function southwest_spi3_altfuncs[] = {
-	ALTERNATE_FUNCTION(76, 3, false),
-	ALTERNATE_FUNCTION(80, 3, false),
+static const unsigned int southwest_spi3_altfuncs[] = {
+	PINMODE(3, 0), PINMODE(2, 0), PINMODE(3, 0), PINMODE(2, 0), /* 76, 79, 80, 81 */
+	PINMODE(2, 0),						    /* 82 */
 };
 
-static const struct chv_pingroup southwest_groups[] = {
-	PIN_GROUP_WITH_ALT("uart0_grp", southwest_uart0_pins, 2, false),
-	PIN_GROUP_WITH_ALT("uart1_grp", southwest_uart1_pins, 1, false),
-	PIN_GROUP_WITH_ALT("uart2_grp", southwest_uart2_pins, 1, false),
-	PIN_GROUP_WITH_ALT("hda_grp", southwest_hda_pins, 2, false),
-	PIN_GROUP_WITH_ALT("i2c0_grp", southwest_i2c0_pins, 1, true),
-	PIN_GROUP_WITH_ALT("i2c1_grp", southwest_i2c1_pins, 1, true),
-	PIN_GROUP_WITH_ALT("i2c2_grp", southwest_i2c2_pins, 1, true),
-	PIN_GROUP_WITH_ALT("i2c3_grp", southwest_i2c3_pins, 1, true),
-	PIN_GROUP_WITH_ALT("i2c4_grp", southwest_i2c4_pins, 1, true),
-	PIN_GROUP_WITH_ALT("i2c5_grp", southwest_i2c5_pins, 1, true),
-	PIN_GROUP_WITH_ALT("i2c6_grp", southwest_i2c6_pins, 1, true),
-	PIN_GROUP_WITH_ALT("i2c_nfc_grp", southwest_i2c_nfc_pins, 2, true),
-
-	PIN_GROUP_WITH_OVERRIDE("lpe_grp", southwest_lpe_pins, 1, false,
-				southwest_lpe_altfuncs),
-	PIN_GROUP_WITH_OVERRIDE("spi3_grp", southwest_spi3_pins, 2, false,
-				southwest_spi3_altfuncs),
+static const struct intel_pingroup southwest_groups[] = {
+	PIN_GROUP("uart0_grp", southwest_uart0_pins, PINMODE(2, 0)),
+	PIN_GROUP("uart1_grp", southwest_uart1_pins, PINMODE(1, 0)),
+	PIN_GROUP("uart2_grp", southwest_uart2_pins, PINMODE(1, 0)),
+	PIN_GROUP("hda_grp", southwest_hda_pins, PINMODE(2, 0)),
+	PIN_GROUP("i2c0_grp", southwest_i2c0_pins, PINMODE(1, 1)),
+	PIN_GROUP("i2c1_grp", southwest_i2c1_pins, PINMODE(1, 1)),
+	PIN_GROUP("i2c2_grp", southwest_i2c2_pins, PINMODE(1, 1)),
+	PIN_GROUP("i2c3_grp", southwest_i2c3_pins, PINMODE(1, 1)),
+	PIN_GROUP("i2c4_grp", southwest_i2c4_pins, PINMODE(1, 1)),
+	PIN_GROUP("i2c5_grp", southwest_i2c5_pins, PINMODE(1, 1)),
+	PIN_GROUP("i2c6_grp", southwest_i2c6_pins, PINMODE(1, 1)),
+	PIN_GROUP("i2c_nfc_grp", southwest_i2c_nfc_pins, PINMODE(2, 1)),
+	PIN_GROUP("lpe_grp", southwest_lpe_pins, southwest_lpe_altfuncs),
+	PIN_GROUP("spi3_grp", southwest_spi3_pins, southwest_spi3_altfuncs),
 };
 
 static const char * const southwest_uart0_groups[] = { "uart0_grp" };
@@ -360,14 +293,14 @@ static const struct intel_function southwest_functions[] = {
 	FUNCTION("spi3", southwest_spi3_groups),
 };
 
-static const struct chv_gpio_pinrange southwest_gpio_ranges[] = {
-	GPIO_PINRANGE(0, 7),
-	GPIO_PINRANGE(15, 22),
-	GPIO_PINRANGE(30, 37),
-	GPIO_PINRANGE(45, 52),
-	GPIO_PINRANGE(60, 67),
-	GPIO_PINRANGE(75, 82),
-	GPIO_PINRANGE(90, 97),
+static const struct intel_padgroup southwest_gpps[] = {
+	CHV_GPP(0, 7),
+	CHV_GPP(15, 22),
+	CHV_GPP(30, 37),
+	CHV_GPP(45, 52),
+	CHV_GPP(60, 67),
+	CHV_GPP(75, 82),
+	CHV_GPP(90, 97),
 };
 
 static const struct chv_community southwest_community = {
@@ -378,8 +311,8 @@ static const struct chv_community southwest_community = {
 	.ngroups = ARRAY_SIZE(southwest_groups),
 	.functions = southwest_functions,
 	.nfunctions = ARRAY_SIZE(southwest_functions),
-	.gpio_ranges = southwest_gpio_ranges,
-	.ngpio_ranges = ARRAY_SIZE(southwest_gpio_ranges),
+	.gpps = southwest_gpps,
+	.ngpps = ARRAY_SIZE(southwest_gpps),
 	/*
 	 * Southwest community can generate GPIO interrupts only for the
 	 * first 8 interrupts. The upper half (8-15) can only be used to
@@ -455,20 +388,20 @@ static const struct pinctrl_pin_desc north_pins[] = {
 	PINCTRL_PIN(72, "PANEL0_VDDEN"),
 };
 
-static const struct chv_gpio_pinrange north_gpio_ranges[] = {
-	GPIO_PINRANGE(0, 8),
-	GPIO_PINRANGE(15, 27),
-	GPIO_PINRANGE(30, 41),
-	GPIO_PINRANGE(45, 56),
-	GPIO_PINRANGE(60, 72),
+static const struct intel_padgroup north_gpps[] = {
+	CHV_GPP(0, 8),
+	CHV_GPP(15, 27),
+	CHV_GPP(30, 41),
+	CHV_GPP(45, 56),
+	CHV_GPP(60, 72),
 };
 
 static const struct chv_community north_community = {
 	.uid = "2",
 	.pins = north_pins,
 	.npins = ARRAY_SIZE(north_pins),
-	.gpio_ranges = north_gpio_ranges,
-	.ngpio_ranges = ARRAY_SIZE(north_gpio_ranges),
+	.gpps = north_gpps,
+	.ngpps = ARRAY_SIZE(north_gpps),
 	/*
 	 * North community can generate GPIO interrupts only for the first
 	 * 8 interrupts. The upper half (8-15) can only be used to trigger
@@ -506,17 +439,17 @@ static const struct pinctrl_pin_desc east_pins[] = {
 	PINCTRL_PIN(26, "MF_ISH_I2C1_SDA"),
 };
 
-static const struct chv_gpio_pinrange east_gpio_ranges[] = {
-	GPIO_PINRANGE(0, 11),
-	GPIO_PINRANGE(15, 26),
+static const struct intel_padgroup east_gpps[] = {
+	CHV_GPP(0, 11),
+	CHV_GPP(15, 26),
 };
 
 static const struct chv_community east_community = {
 	.uid = "3",
 	.pins = east_pins,
 	.npins = ARRAY_SIZE(east_pins),
-	.gpio_ranges = east_gpio_ranges,
-	.ngpio_ranges = ARRAY_SIZE(east_gpio_ranges),
+	.gpps = east_gpps,
+	.ngpps = ARRAY_SIZE(east_gpps),
 	.nirqs = 16,
 	.acpi_space_id = 0x93,
 };
@@ -596,14 +529,14 @@ static const unsigned southeast_sdmmc3_pins[] = {
 static const unsigned southeast_spi1_pins[] = { 60, 61, 62, 64, 66 };
 static const unsigned southeast_spi2_pins[] = { 2, 3, 4, 6, 7 };
 
-static const struct chv_pingroup southeast_groups[] = {
-	PIN_GROUP_WITH_ALT("pwm0_grp", southeast_pwm0_pins, 1, false),
-	PIN_GROUP_WITH_ALT("pwm1_grp", southeast_pwm1_pins, 1, false),
-	PIN_GROUP_WITH_ALT("sdmmc1_grp", southeast_sdmmc1_pins, 1, false),
-	PIN_GROUP_WITH_ALT("sdmmc2_grp", southeast_sdmmc2_pins, 1, false),
-	PIN_GROUP_WITH_ALT("sdmmc3_grp", southeast_sdmmc3_pins, 1, false),
-	PIN_GROUP_WITH_ALT("spi1_grp", southeast_spi1_pins, 1, false),
-	PIN_GROUP_WITH_ALT("spi2_grp", southeast_spi2_pins, 4, false),
+static const struct intel_pingroup southeast_groups[] = {
+	PIN_GROUP("pwm0_grp", southeast_pwm0_pins, PINMODE(1, 0)),
+	PIN_GROUP("pwm1_grp", southeast_pwm1_pins, PINMODE(1, 0)),
+	PIN_GROUP("sdmmc1_grp", southeast_sdmmc1_pins, PINMODE(1, 0)),
+	PIN_GROUP("sdmmc2_grp", southeast_sdmmc2_pins, PINMODE(1, 0)),
+	PIN_GROUP("sdmmc3_grp", southeast_sdmmc3_pins, PINMODE(1, 0)),
+	PIN_GROUP("spi1_grp", southeast_spi1_pins, PINMODE(1, 0)),
+	PIN_GROUP("spi2_grp", southeast_spi2_pins, PINMODE(4, 0)),
 };
 
 static const char * const southeast_pwm0_groups[] = { "pwm0_grp" };
@@ -624,13 +557,13 @@ static const struct intel_function southeast_functions[] = {
 	FUNCTION("spi2", southeast_spi2_groups),
 };
 
-static const struct chv_gpio_pinrange southeast_gpio_ranges[] = {
-	GPIO_PINRANGE(0, 7),
-	GPIO_PINRANGE(15, 26),
-	GPIO_PINRANGE(30, 35),
-	GPIO_PINRANGE(45, 52),
-	GPIO_PINRANGE(60, 69),
-	GPIO_PINRANGE(75, 85),
+static const struct intel_padgroup southeast_gpps[] = {
+	CHV_GPP(0, 7),
+	CHV_GPP(15, 26),
+	CHV_GPP(30, 35),
+	CHV_GPP(45, 52),
+	CHV_GPP(60, 69),
+	CHV_GPP(75, 85),
 };
 
 static const struct chv_community southeast_community = {
@@ -641,8 +574,8 @@ static const struct chv_community southeast_community = {
 	.ngroups = ARRAY_SIZE(southeast_groups),
 	.functions = southeast_functions,
 	.nfunctions = ARRAY_SIZE(southeast_functions),
-	.gpio_ranges = southeast_gpio_ranges,
-	.ngpio_ranges = ARRAY_SIZE(southeast_gpio_ranges),
+	.gpps = southeast_gpps,
+	.ngpps = ARRAY_SIZE(southeast_gpps),
 	.nirqs = 16,
 	.acpi_space_id = 0x94,
 };
@@ -789,7 +722,7 @@ static int chv_pinmux_set_mux(struct pinctrl_dev *pctldev,
 			      unsigned int function, unsigned int group)
 {
 	struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
-	const struct chv_pingroup *grp;
+	const struct intel_pingroup *grp;
 	unsigned long flags;
 	int i;
 
@@ -808,22 +741,21 @@ static int chv_pinmux_set_mux(struct pinctrl_dev *pctldev,
 	}
 
 	for (i = 0; i < grp->npins; i++) {
-		const struct chv_alternate_function *altfunc = &grp->altfunc;
 		int pin = grp->pins[i];
 		void __iomem *reg;
+		unsigned int mode;
+		bool invert_oe;
 		u32 value;
 
 		/* Check if there is pin-specific config */
-		if (grp->overrides) {
-			int j;
-
-			for (j = 0; j < grp->noverrides; j++) {
-				if (grp->overrides[j].pin == pin) {
-					altfunc = &grp->overrides[j];
-					break;
-				}
-			}
-		}
+		if (grp->modes)
+			mode = grp->modes[i];
+		else
+			mode = grp->mode;
+
+		/* Extract OE inversion */
+		invert_oe = mode & PINMODE_INVERT_OE;
+		mode &= ~PINMODE_INVERT_OE;
 
 		reg = chv_padreg(pctrl, pin, CHV_PADCTRL0);
 		value = readl(reg);
@@ -831,18 +763,18 @@ static int chv_pinmux_set_mux(struct pinctrl_dev *pctldev,
 		value &= ~CHV_PADCTRL0_GPIOEN;
 		/* Set to desired mode */
 		value &= ~CHV_PADCTRL0_PMODE_MASK;
-		value |= altfunc->mode << CHV_PADCTRL0_PMODE_SHIFT;
+		value |= mode << CHV_PADCTRL0_PMODE_SHIFT;
 		chv_writel(value, reg);
 
 		/* Update for invert_oe */
 		reg = chv_padreg(pctrl, pin, CHV_PADCTRL1);
 		value = readl(reg) & ~CHV_PADCTRL1_INVRXTX_MASK;
-		if (altfunc->invert_oe)
+		if (invert_oe)
 			value |= CHV_PADCTRL1_INVRXTX_TXENABLE;
 		chv_writel(value, reg);
 
 		dev_dbg(pctrl->dev, "configured pin %u mode %u OE %sinverted\n",
-			pin, altfunc->mode, altfunc->invert_oe ? "" : "not ");
+			pin, mode, invert_oe ? "" : "not ");
 	}
 
 	raw_spin_unlock_irqrestore(&chv_lock, flags);
@@ -1479,11 +1411,15 @@ static void chv_gpio_irq_handler(struct irq_desc *desc)
 	struct chv_pinctrl *pctrl = gpiochip_get_data(gc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned long pending;
+	unsigned long flags;
 	u32 intr_line;
 
 	chained_irq_enter(chip, desc);
 
+	raw_spin_lock_irqsave(&chv_lock, flags);
 	pending = readl(pctrl->regs + CHV_INTSTAT);
+	raw_spin_unlock_irqrestore(&chv_lock, flags);
+
 	for_each_set_bit(intr_line, &pending, pctrl->community->nirqs) {
 		unsigned int irq, offset;
 
@@ -1590,14 +1526,14 @@ static int chv_gpio_add_pin_ranges(struct gpio_chip *chip)
 {
 	struct chv_pinctrl *pctrl = gpiochip_get_data(chip);
 	const struct chv_community *community = pctrl->community;
-	const struct chv_gpio_pinrange *range;
+	const struct intel_padgroup *gpp;
 	int ret, i;
 
-	for (i = 0; i < community->ngpio_ranges; i++) {
-		range = &community->gpio_ranges[i];
+	for (i = 0; i < community->ngpps; i++) {
+		gpp = &community->gpps[i];
 		ret = gpiochip_add_pin_range(chip, dev_name(pctrl->dev),
-					     range->base, range->base,
-					     range->npins);
+					     gpp->base, gpp->base,
+					     gpp->size);
 		if (ret) {
 			dev_err(pctrl->dev, "failed to add GPIO pin range\n");
 			return ret;
@@ -1609,7 +1545,7 @@ static int chv_gpio_add_pin_ranges(struct gpio_chip *chip)
 
 static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
 {
-	const struct chv_gpio_pinrange *range;
+	const struct intel_padgroup *gpp;
 	struct gpio_chip *chip = &pctrl->chip;
 	bool need_valid_mask = !dmi_check_system(chv_no_valid_mask);
 	const struct chv_community *community = pctrl->community;
@@ -1657,12 +1593,12 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
 	}
 
 	if (!need_valid_mask) {
-		for (i = 0; i < community->ngpio_ranges; i++) {
-			range = &community->gpio_ranges[i];
+		for (i = 0; i < community->ngpps; i++) {
+			gpp = &community->gpps[i];
 
 			irq_domain_associate_many(chip->irq.domain, irq_base,
-						  range->base, range->npins);
-			irq_base += range->npins;
+						  gpp->base, gpp->size);
+			irq_base += gpp->size;
 		}
 	}
 
diff --git a/drivers/pinctrl/intel/pinctrl-icelake.c b/drivers/pinctrl/intel/pinctrl-icelake.c
index 6489e9bbb61f..429b5a83acf0 100644
--- a/drivers/pinctrl/intel/pinctrl-icelake.c
+++ b/drivers/pinctrl/intel/pinctrl-icelake.c
@@ -29,8 +29,6 @@
 		.gpio_base = (g),			\
 	}
 
-#define ICL_NO_GPIO	-1
-
 #define ICL_COMMUNITY(b, s, e, g)			\
 	{						\
 		.barno = (b),				\
@@ -305,29 +303,29 @@ static const struct pinctrl_pin_desc icllp_pins[] = {
 };
 
 static const struct intel_padgroup icllp_community0_gpps[] = {
-	ICL_GPP(0, 0, 7, 0),			/* GPP_G */
-	ICL_GPP(1, 8, 33, 32),			/* GPP_B */
-	ICL_GPP(2, 34, 58, 64),			/* GPP_A */
+	ICL_GPP(0, 0, 7, 0),				/* GPP_G */
+	ICL_GPP(1, 8, 33, 32),				/* GPP_B */
+	ICL_GPP(2, 34, 58, 64),				/* GPP_A */
 };
 
 static const struct intel_padgroup icllp_community1_gpps[] = {
-	ICL_GPP(0, 59, 82, 96),			/* GPP_H */
-	ICL_GPP(1, 83, 103, 128),		/* GPP_D */
-	ICL_GPP(2, 104, 123, 160),		/* GPP_F */
-	ICL_GPP(3, 124, 152, 192),		/* vGPIO */
+	ICL_GPP(0, 59, 82, 96),				/* GPP_H */
+	ICL_GPP(1, 83, 103, 128),			/* GPP_D */
+	ICL_GPP(2, 104, 123, 160),			/* GPP_F */
+	ICL_GPP(3, 124, 152, 192),			/* vGPIO */
 };
 
 static const struct intel_padgroup icllp_community4_gpps[] = {
-	ICL_GPP(0, 153, 176, 224),		/* GPP_C */
-	ICL_GPP(1, 177, 182, ICL_NO_GPIO),	/* HVCMOS */
-	ICL_GPP(2, 183, 206, 256),		/* GPP_E */
-	ICL_GPP(3, 207, 215, ICL_NO_GPIO),	/* JTAG */
+	ICL_GPP(0, 153, 176, 224),			/* GPP_C */
+	ICL_GPP(1, 177, 182, INTEL_GPIO_BASE_NOMAP),	/* HVCMOS */
+	ICL_GPP(2, 183, 206, 256),			/* GPP_E */
+	ICL_GPP(3, 207, 215, INTEL_GPIO_BASE_NOMAP),	/* JTAG */
 };
 
 static const struct intel_padgroup icllp_community5_gpps[] = {
-	ICL_GPP(0, 216, 223, 288),		/* GPP_R */
-	ICL_GPP(1, 224, 231, 320),		/* GPP_S */
-	ICL_GPP(2, 232, 240, ICL_NO_GPIO),	/* SPI */
+	ICL_GPP(0, 216, 223, 288),			/* GPP_R */
+	ICL_GPP(1, 224, 231, 320),			/* GPP_S */
+	ICL_GPP(2, 232, 240, INTEL_GPIO_BASE_NOMAP),	/* SPI */
 };
 
 static const struct intel_community icllp_communities[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 74fdfd2b9ff5..6a274e20d926 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -798,7 +798,7 @@ static int intel_gpio_to_pin(struct intel_pinctrl *pctrl, unsigned int offset,
 		for (j = 0; j < comm->ngpps; j++) {
 			const struct intel_padgroup *pgrp = &comm->gpps[j];
 
-			if (pgrp->gpio_base < 0)
+			if (pgrp->gpio_base == INTEL_GPIO_BASE_NOMAP)
 				continue;
 
 			if (offset >= pgrp->gpio_base &&
@@ -1138,7 +1138,7 @@ static int intel_gpio_add_community_ranges(struct intel_pinctrl *pctrl,
 	for (i = 0; i < community->ngpps; i++) {
 		const struct intel_padgroup *gpp = &community->gpps[i];
 
-		if (gpp->gpio_base < 0)
+		if (gpp->gpio_base == INTEL_GPIO_BASE_NOMAP)
 			continue;
 
 		ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev),
@@ -1180,7 +1180,7 @@ static unsigned int intel_gpio_ngpio(const struct intel_pinctrl *pctrl)
 		for (j = 0; j < community->ngpps; j++) {
 			const struct intel_padgroup *gpp = &community->gpps[j];
 
-			if (gpp->gpio_base < 0)
+			if (gpp->gpio_base == INTEL_GPIO_BASE_NOMAP)
 				continue;
 
 			if (gpp->gpio_base + gpp->size > ngpio)
@@ -1276,8 +1276,18 @@ static int intel_pinctrl_add_padgroups(struct intel_pinctrl *pctrl,
 		if (gpps[i].size > 32)
 			return -EINVAL;
 
-		if (!gpps[i].gpio_base)
-			gpps[i].gpio_base = gpps[i].base;
+		/* Special treatment for GPIO base */
+		switch (gpps[i].gpio_base) {
+			case INTEL_GPIO_BASE_MATCH:
+				gpps[i].gpio_base = gpps[i].base;
+				break;
+			case INTEL_GPIO_BASE_ZERO:
+				gpps[i].gpio_base = 0;
+				break;
+			case INTEL_GPIO_BASE_NOMAP:
+			default:
+				break;
+		}
 
 		gpps[i].padown_num = padown_num;
 
@@ -1596,7 +1606,7 @@ static void intel_restore_hostown(struct intel_pinctrl *pctrl, unsigned int c,
 	struct device *dev = pctrl->dev;
 	u32 requested;
 
-	if (padgrp->gpio_base < 0)
+	if (padgrp->gpio_base == INTEL_GPIO_BASE_NOMAP)
 		return;
 
 	requested = intel_gpio_is_requested(&pctrl->chip, padgrp->gpio_base, padgrp->size);
diff --git a/drivers/pinctrl/intel/pinctrl-intel.h b/drivers/pinctrl/intel/pinctrl-intel.h
index c6f066f6d3fb..cc78c483518f 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.h
+++ b/drivers/pinctrl/intel/pinctrl-intel.h
@@ -53,8 +53,7 @@ struct intel_function {
  * @reg_num: GPI_IS register number
  * @base: Starting pin of this group
  * @size: Size of this group (maximum is 32).
- * @gpio_base: Starting GPIO base of this group (%0 if matches with @base,
- *	       and %-1 if no GPIO mapping should be created)
+ * @gpio_base: Starting GPIO base of this group
  * @padown_num: PAD_OWN register number (assigned by the core driver)
  *
  * If pad groups of a community are not the same size, use this structure
@@ -68,6 +67,19 @@ struct intel_padgroup {
 	unsigned int padown_num;
 };
 
+/**
+ * enum - Special treatment for GPIO base in pad group
+ *
+ * @INTEL_GPIO_BASE_ZERO:	force GPIO base to be 0
+ * @INTEL_GPIO_BASE_NOMAP:	no GPIO mapping should be created
+ * @INTEL_GPIO_BASE_MATCH:	matches with starting pin number
+ */
+enum {
+	INTEL_GPIO_BASE_ZERO	= -2,
+	INTEL_GPIO_BASE_NOMAP	= -1,
+	INTEL_GPIO_BASE_MATCH	= 0,
+};
+
 /**
  * struct intel_community - Intel pin community description
  * @barno: MMIO BAR number where registers for this community reside
@@ -82,20 +94,20 @@ struct intel_padgroup {
  * @ie_offset: Register offset of GPI_IE from @regs.
  * @features: Additional features supported by the hardware
  * @pin_base: Starting pin of pins in this community
+ * @npins: Number of pins in this community
  * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK,
- *            HOSTSW_OWN,  GPI_IS, GPI_IE, etc. Used when @gpps is %NULL.
+ *            HOSTSW_OWN, GPI_IS, GPI_IE. Used when @gpps is %NULL.
  * @gpp_num_padown_regs: Number of pad registers each pad group consumes at
  *			 minimum. Use %0 if the number of registers can be
  *			 determined by the size of the group.
- * @npins: Number of pins in this community
  * @gpps: Pad groups if the controller has variable size pad groups
  * @ngpps: Number of pad groups in this community
  * @pad_map: Optional non-linear mapping of the pads
  * @regs: Community specific common registers (reserved for core driver)
  * @pad_regs: Community specific pad registers (reserved for core driver)
  *
- * Most Intel GPIO host controllers this driver supports each pad group is
- * of equal size (except the last one). In that case the driver can just
+ * In some of Intel GPIO host controllers this driver supports each pad group
+ * is of equal size (except the last one). In that case the driver can just
  * fill in @gpp_size field and let the core driver to handle the rest. If
  * the controller has pad groups of variable size the client driver can
  * pass custom @gpps and @ngpps instead.
@@ -109,12 +121,13 @@ struct intel_community {
 	unsigned int ie_offset;
 	unsigned int features;
 	unsigned int pin_base;
+	size_t npins;
 	unsigned int gpp_size;
 	unsigned int gpp_num_padown_regs;
-	size_t npins;
 	const struct intel_padgroup *gpps;
 	size_t ngpps;
 	const unsigned int *pad_map;
+
 	/* Reserved for the core driver */
 	void __iomem *regs;
 	void __iomem *pad_regs;
diff --git a/drivers/pinctrl/intel/pinctrl-jasperlake.c b/drivers/pinctrl/intel/pinctrl-jasperlake.c
new file mode 100644
index 000000000000..9bd0e8e6310c
--- /dev/null
+++ b/drivers/pinctrl/intel/pinctrl-jasperlake.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Jasper Lake PCH pinctrl/GPIO driver
+ *
+ * Copyright (C) 2020, Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-intel.h"
+
+#define JSL_PAD_OWN	0x020
+#define JSL_PADCFGLOCK	0x080
+#define JSL_HOSTSW_OWN	0x0b0
+#define JSL_GPI_IS	0x100
+#define JSL_GPI_IE	0x120
+
+#define JSL_GPP(r, s, e, g)				\
+	{						\
+		.reg_num = (r),				\
+		.base = (s),				\
+		.size = ((e) - (s) + 1),		\
+		.gpio_base = (g),			\
+	}
+
+#define JSL_COMMUNITY(b, s, e, g)			\
+	{						\
+		.barno = (b),				\
+		.padown_offset = JSL_PAD_OWN,		\
+		.padcfglock_offset = JSL_PADCFGLOCK,	\
+		.hostown_offset = JSL_HOSTSW_OWN,	\
+		.is_offset = JSL_GPI_IS,		\
+		.ie_offset = JSL_GPI_IE,		\
+		.pin_base = (s),			\
+		.npins = ((e) - (s) + 1),		\
+		.gpps = (g),				\
+		.ngpps = ARRAY_SIZE(g),			\
+	}
+
+/* Jasper Lake */
+static const struct pinctrl_pin_desc jsl_pins[] = {
+	/* GPP_F */
+	PINCTRL_PIN(0, "CNV_BRI_DT_UART0_RTSB"),
+	PINCTRL_PIN(1, "CNV_BRI_RSP_UART0_RXD"),
+	PINCTRL_PIN(2, "EMMC_HIP_MON"),
+	PINCTRL_PIN(3, "CNV_RGI_RSP_UART0_CTSB"),
+	PINCTRL_PIN(4, "CNV_RF_RESET_B"),
+	PINCTRL_PIN(5, "MODEM_CLKREQ"),
+	PINCTRL_PIN(6, "CNV_PA_BLANKING"),
+	PINCTRL_PIN(7, "EMMC_CMD"),
+	PINCTRL_PIN(8, "EMMC_DATA0"),
+	PINCTRL_PIN(9, "EMMC_DATA1"),
+	PINCTRL_PIN(10, "EMMC_DATA2"),
+	PINCTRL_PIN(11, "EMMC_DATA3"),
+	PINCTRL_PIN(12, "EMMC_DATA4"),
+	PINCTRL_PIN(13, "EMMC_DATA5"),
+	PINCTRL_PIN(14, "EMMC_DATA6"),
+	PINCTRL_PIN(15, "EMMC_DATA7"),
+	PINCTRL_PIN(16, "EMMC_RCLK"),
+	PINCTRL_PIN(17, "EMMC_CLK"),
+	PINCTRL_PIN(18, "EMMC_RESETB"),
+	PINCTRL_PIN(19, "A4WP_PRESENT"),
+	/* GPP_B */
+	PINCTRL_PIN(20, "CORE_VID_0"),
+	PINCTRL_PIN(21, "CORE_VID_1"),
+	PINCTRL_PIN(22, "VRALERTB"),
+	PINCTRL_PIN(23, "CPU_GP_2"),
+	PINCTRL_PIN(24, "CPU_GP_3"),
+	PINCTRL_PIN(25, "SRCCLKREQB_0"),
+	PINCTRL_PIN(26, "SRCCLKREQB_1"),
+	PINCTRL_PIN(27, "SRCCLKREQB_2"),
+	PINCTRL_PIN(28, "SRCCLKREQB_3"),
+	PINCTRL_PIN(29, "SRCCLKREQB_4"),
+	PINCTRL_PIN(30, "SRCCLKREQB_5"),
+	PINCTRL_PIN(31, "PMCALERTB"),
+	PINCTRL_PIN(32, "SLP_S0B"),
+	PINCTRL_PIN(33, "PLTRSTB"),
+	PINCTRL_PIN(34, "SPKR"),
+	PINCTRL_PIN(35, "GSPI0_CS0B"),
+	PINCTRL_PIN(36, "GSPI0_CLK"),
+	PINCTRL_PIN(37, "GSPI0_MISO"),
+	PINCTRL_PIN(38, "GSPI0_MOSI"),
+	PINCTRL_PIN(39, "GSPI1_CS0B"),
+	PINCTRL_PIN(40, "GSPI1_CLK"),
+	PINCTRL_PIN(41, "GSPI1_MISO"),
+	PINCTRL_PIN(42, "GSPI1_MOSI"),
+	PINCTRL_PIN(43, "DDSP_HPD_A"),
+	PINCTRL_PIN(44, "GSPI0_CLK_LOOPBK"),
+	PINCTRL_PIN(45, "GSPI1_CLK_LOOPBK"),
+	/* GPP_A */
+	PINCTRL_PIN(46, "ESPI_IO_0"),
+	PINCTRL_PIN(47, "ESPI_IO_1"),
+	PINCTRL_PIN(48, "ESPI_IO_2"),
+	PINCTRL_PIN(49, "ESPI_IO_3"),
+	PINCTRL_PIN(50, "ESPI_CSB"),
+	PINCTRL_PIN(51, "ESPI_CLK"),
+	PINCTRL_PIN(52, "ESPI_RESETB"),
+	PINCTRL_PIN(53, "SMBCLK"),
+	PINCTRL_PIN(54, "SMBDATA"),
+	PINCTRL_PIN(55, "SMBALERTB"),
+	PINCTRL_PIN(56, "CPU_GP_0"),
+	PINCTRL_PIN(57, "CPU_GP_1"),
+	PINCTRL_PIN(58, "USB2_OCB_1"),
+	PINCTRL_PIN(59, "USB2_OCB_2"),
+	PINCTRL_PIN(60, "USB2_OCB_3"),
+	PINCTRL_PIN(61, "DDSP_HPD_A_TIME_SYNC_0"),
+	PINCTRL_PIN(62, "DDSP_HPD_B"),
+	PINCTRL_PIN(63, "DDSP_HPD_C"),
+	PINCTRL_PIN(64, "USB2_OCB_0"),
+	PINCTRL_PIN(65, "PCHHOTB"),
+	PINCTRL_PIN(66, "ESPI_CLK_LOOPBK"),
+	/* GPP_S */
+	PINCTRL_PIN(67, "SNDW1_CLK"),
+	PINCTRL_PIN(68, "SNDW1_DATA"),
+	PINCTRL_PIN(69, "SNDW2_CLK"),
+	PINCTRL_PIN(70, "SNDW2_DATA"),
+	PINCTRL_PIN(71, "SNDW1_CLK"),
+	PINCTRL_PIN(72, "SNDW1_DATA"),
+	PINCTRL_PIN(73, "SNDW4_CLK_DMIC_CLK_0"),
+	PINCTRL_PIN(74, "SNDW4_DATA_DMIC_DATA_0"),
+	/* GPP_R */
+	PINCTRL_PIN(75, "HDA_BCLK"),
+	PINCTRL_PIN(76, "HDA_SYNC"),
+	PINCTRL_PIN(77, "HDA_SDO"),
+	PINCTRL_PIN(78, "HDA_SDI_0"),
+	PINCTRL_PIN(79, "HDA_RSTB"),
+	PINCTRL_PIN(80, "HDA_SDI_1"),
+	PINCTRL_PIN(81, "I2S1_SFRM"),
+	PINCTRL_PIN(82, "I2S1_TXD"),
+	/* GPP_H */
+	PINCTRL_PIN(83, "GPPC_H_0"),
+	PINCTRL_PIN(84, "SD_PWR_EN_B"),
+	PINCTRL_PIN(85, "MODEM_CLKREQ"),
+	PINCTRL_PIN(86, "SX_EXIT_HOLDOFFB"),
+	PINCTRL_PIN(87, "I2C2_SDA"),
+	PINCTRL_PIN(88, "I2C2_SCL"),
+	PINCTRL_PIN(89, "I2C3_SDA"),
+	PINCTRL_PIN(90, "I2C3_SCL"),
+	PINCTRL_PIN(91, "I2C4_SDA"),
+	PINCTRL_PIN(92, "I2C4_SCL"),
+	PINCTRL_PIN(93, "CPU_VCCIO_PWR_GATEB"),
+	PINCTRL_PIN(94, "I2S2_SCLK"),
+	PINCTRL_PIN(95, "I2S2_SFRM"),
+	PINCTRL_PIN(96, "I2S2_TXD"),
+	PINCTRL_PIN(97, "I2S2_RXD"),
+	PINCTRL_PIN(98, "I2S1_SCLK"),
+	PINCTRL_PIN(99, "GPPC_H_16"),
+	PINCTRL_PIN(100, "GPPC_H_17"),
+	PINCTRL_PIN(101, "GPPC_H_18"),
+	PINCTRL_PIN(102, "GPPC_H_19"),
+	PINCTRL_PIN(103, "GPPC_H_20"),
+	PINCTRL_PIN(104, "GPPC_H_21"),
+	PINCTRL_PIN(105, "GPPC_H_22"),
+	PINCTRL_PIN(106, "GPPC_H_23"),
+	/* GPP_D */
+	PINCTRL_PIN(107, "SPI1_CSB"),
+	PINCTRL_PIN(108, "SPI1_CLK"),
+	PINCTRL_PIN(109, "SPI1_MISO_IO_1"),
+	PINCTRL_PIN(110, "SPI1_MOSI_IO_0"),
+	PINCTRL_PIN(111, "ISH_I2C0_SDA"),
+	PINCTRL_PIN(112, "ISH_I2C0_SCL"),
+	PINCTRL_PIN(113, "ISH_I2C1_SDA"),
+	PINCTRL_PIN(114, "ISH_I2C1_SCL"),
+	PINCTRL_PIN(115, "ISH_SPI_CSB"),
+	PINCTRL_PIN(116, "ISH_SPI_CLK"),
+	PINCTRL_PIN(117, "ISH_SPI_MISO"),
+	PINCTRL_PIN(118, "ISH_SPI_MOSI"),
+	PINCTRL_PIN(119, "ISH_UART0_RXD"),
+	PINCTRL_PIN(120, "ISH_UART0_TXD"),
+	PINCTRL_PIN(121, "ISH_UART0_RTSB"),
+	PINCTRL_PIN(122, "ISH_UART0_CTSB"),
+	PINCTRL_PIN(123, "SPI1_IO_2"),
+	PINCTRL_PIN(124, "SPI1_IO_3"),
+	PINCTRL_PIN(125, "I2S_MCLK"),
+	PINCTRL_PIN(126, "CNV_MFUART2_RXD"),
+	PINCTRL_PIN(127, "CNV_MFUART2_TXD"),
+	PINCTRL_PIN(128, "CNV_PA_BLANKING"),
+	PINCTRL_PIN(129, "I2C5_SDA"),
+	PINCTRL_PIN(130, "I2C5_SCL"),
+	PINCTRL_PIN(131, "GSPI2_CLK_LOOPBK"),
+	PINCTRL_PIN(132, "SPI1_CLK_LOOPBK"),
+	/* vGPIO */
+	PINCTRL_PIN(133, "CNV_BTEN"),
+	PINCTRL_PIN(134, "CNV_WCEN"),
+	PINCTRL_PIN(135, "CNV_BT_HOST_WAKEB"),
+	PINCTRL_PIN(136, "CNV_BT_IF_SELECT"),
+	PINCTRL_PIN(137, "vCNV_BT_UART_TXD"),
+	PINCTRL_PIN(138, "vCNV_BT_UART_RXD"),
+	PINCTRL_PIN(139, "vCNV_BT_UART_CTS_B"),
+	PINCTRL_PIN(140, "vCNV_BT_UART_RTS_B"),
+	PINCTRL_PIN(141, "vCNV_MFUART1_TXD"),
+	PINCTRL_PIN(142, "vCNV_MFUART1_RXD"),
+	PINCTRL_PIN(143, "vCNV_MFUART1_CTS_B"),
+	PINCTRL_PIN(144, "vCNV_MFUART1_RTS_B"),
+	PINCTRL_PIN(145, "vUART0_TXD"),
+	PINCTRL_PIN(146, "vUART0_RXD"),
+	PINCTRL_PIN(147, "vUART0_CTS_B"),
+	PINCTRL_PIN(148, "vUART0_RTS_B"),
+	PINCTRL_PIN(149, "vISH_UART0_TXD"),
+	PINCTRL_PIN(150, "vISH_UART0_RXD"),
+	PINCTRL_PIN(151, "vISH_UART0_CTS_B"),
+	PINCTRL_PIN(152, "vISH_UART0_RTS_B"),
+	PINCTRL_PIN(153, "vCNV_BT_I2S_BCLK"),
+	PINCTRL_PIN(154, "vCNV_BT_I2S_WS_SYNC"),
+	PINCTRL_PIN(155, "vCNV_BT_I2S_SDO"),
+	PINCTRL_PIN(156, "vCNV_BT_I2S_SDI"),
+	PINCTRL_PIN(157, "vI2S2_SCLK"),
+	PINCTRL_PIN(158, "vI2S2_SFRM"),
+	PINCTRL_PIN(159, "vI2S2_TXD"),
+	PINCTRL_PIN(160, "vI2S2_RXD"),
+	PINCTRL_PIN(161, "vSD3_CD_B"),
+	/* GPP_C */
+	PINCTRL_PIN(162, "GPPC_C_0"),
+	PINCTRL_PIN(163, "GPPC_C_1"),
+	PINCTRL_PIN(164, "GPPC_C_2"),
+	PINCTRL_PIN(165, "GPPC_C_3"),
+	PINCTRL_PIN(166, "GPPC_C_4"),
+	PINCTRL_PIN(167, "GPPC_C_5"),
+	PINCTRL_PIN(168, "SUSWARNB_SUSPWRDNACK"),
+	PINCTRL_PIN(169, "SUSACKB"),
+	PINCTRL_PIN(170, "UART0_RXD"),
+	PINCTRL_PIN(171, "UART0_TXD"),
+	PINCTRL_PIN(172, "UART0_RTSB"),
+	PINCTRL_PIN(173, "UART0_CTSB"),
+	PINCTRL_PIN(174, "UART1_RXD"),
+	PINCTRL_PIN(175, "UART1_TXD"),
+	PINCTRL_PIN(176, "UART1_RTSB"),
+	PINCTRL_PIN(177, "UART1_CTSB"),
+	PINCTRL_PIN(178, "I2C0_SDA"),
+	PINCTRL_PIN(179, "I2C0_SCL"),
+	PINCTRL_PIN(180, "I2C1_SDA"),
+	PINCTRL_PIN(181, "I2C1_SCL"),
+	PINCTRL_PIN(182, "UART2_RXD"),
+	PINCTRL_PIN(183, "UART2_TXD"),
+	PINCTRL_PIN(184, "UART2_RTSB"),
+	PINCTRL_PIN(185, "UART2_CTSB"),
+	/* HVCMOS */
+	PINCTRL_PIN(186, "L_BKLTEN"),
+	PINCTRL_PIN(187, "L_BKLTCTL"),
+	PINCTRL_PIN(188, "L_VDDEN"),
+	PINCTRL_PIN(189, "SYS_PWROK"),
+	PINCTRL_PIN(190, "SYS_RESETB"),
+	PINCTRL_PIN(191, "MLK_RSTB"),
+	/* GPP_E */
+	PINCTRL_PIN(192, "ISH_GP_0"),
+	PINCTRL_PIN(193, "ISH_GP_1"),
+	PINCTRL_PIN(194, "IMGCLKOUT_1"),
+	PINCTRL_PIN(195, "ISH_GP_2"),
+	PINCTRL_PIN(196, "IMGCLKOUT_2"),
+	PINCTRL_PIN(197, "SATA_LEDB"),
+	PINCTRL_PIN(198, "IMGCLKOUT_3"),
+	PINCTRL_PIN(199, "ISH_GP_3"),
+	PINCTRL_PIN(200, "ISH_GP_4"),
+	PINCTRL_PIN(201, "ISH_GP_5"),
+	PINCTRL_PIN(202, "ISH_GP_6"),
+	PINCTRL_PIN(203, "ISH_GP_7"),
+	PINCTRL_PIN(204, "IMGCLKOUT_4"),
+	PINCTRL_PIN(205, "DDPA_CTRLCLK"),
+	PINCTRL_PIN(206, "DDPA_CTRLDATA"),
+	PINCTRL_PIN(207, "DDPB_CTRLCLK"),
+	PINCTRL_PIN(208, "DDPB_CTRLDATA"),
+	PINCTRL_PIN(209, "DDPC_CTRLCLK"),
+	PINCTRL_PIN(210, "DDPC_CTRLDATA"),
+	PINCTRL_PIN(211, "IMGCLKOUT_5"),
+	PINCTRL_PIN(212, "CNV_BRI_DT"),
+	PINCTRL_PIN(213, "CNV_BRI_RSP"),
+	PINCTRL_PIN(214, "CNV_RGI_DT"),
+	PINCTRL_PIN(215, "CNV_RGI_RSP"),
+	/* GPP_G */
+	PINCTRL_PIN(216, "SD3_CMD"),
+	PINCTRL_PIN(217, "SD3_D0"),
+	PINCTRL_PIN(218, "SD3_D1"),
+	PINCTRL_PIN(219, "SD3_D2"),
+	PINCTRL_PIN(220, "SD3_D3"),
+	PINCTRL_PIN(221, "SD3_CDB"),
+	PINCTRL_PIN(222, "SD3_CLK"),
+	PINCTRL_PIN(223, "SD3_WP"),
+};
+
+static const struct intel_padgroup jsl_community0_gpps[] = {
+	JSL_GPP(0, 0, 19, 320),				/* GPP_F */
+	JSL_GPP(1, 20, 45, 32),				/* GPP_B */
+	JSL_GPP(2, 46, 66, 64),				/* GPP_A */
+	JSL_GPP(3, 67, 74, 96),				/* GPP_S */
+	JSL_GPP(4, 75, 82, 128),			/* GPP_R */
+};
+
+static const struct intel_padgroup jsl_community1_gpps[] = {
+	JSL_GPP(0, 83, 106, 160),			/* GPP_H */
+	JSL_GPP(1, 107, 132, 192),			/* GPP_D */
+	JSL_GPP(2, 133, 161, 224),			/* vGPIO */
+	JSL_GPP(3, 162, 185, 256),			/* GPP_C */
+};
+
+static const struct intel_padgroup jsl_community4_gpps[] = {
+	JSL_GPP(0, 186, 191, INTEL_GPIO_BASE_NOMAP),	/* HVCMOS */
+	JSL_GPP(1, 192, 215, 288),			/* GPP_E */
+};
+
+static const struct intel_padgroup jsl_community5_gpps[] = {
+	JSL_GPP(0, 216, 223, INTEL_GPIO_BASE_ZERO),	/* GPP_G */
+};
+
+static const struct intel_community jsl_communities[] = {
+	JSL_COMMUNITY(0, 0, 82, jsl_community0_gpps),
+	JSL_COMMUNITY(1, 83, 185, jsl_community1_gpps),
+	JSL_COMMUNITY(2, 186, 215, jsl_community4_gpps),
+	JSL_COMMUNITY(3, 216, 223, jsl_community5_gpps),
+};
+
+static const struct intel_pinctrl_soc_data jsl_soc_data = {
+	.pins = jsl_pins,
+	.npins = ARRAY_SIZE(jsl_pins),
+	.communities = jsl_communities,
+	.ncommunities = ARRAY_SIZE(jsl_communities),
+};
+
+static const struct acpi_device_id jsl_pinctrl_acpi_match[] = {
+	{ "INT34C8", (kernel_ulong_t)&jsl_soc_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, jsl_pinctrl_acpi_match);
+
+static INTEL_PINCTRL_PM_OPS(jsl_pinctrl_pm_ops);
+
+static struct platform_driver jsl_pinctrl_driver = {
+	.probe = intel_pinctrl_probe_by_hid,
+	.driver = {
+		.name = "jasperlake-pinctrl",
+		.acpi_match_table = jsl_pinctrl_acpi_match,
+		.pm = &jsl_pinctrl_pm_ops,
+	},
+};
+
+module_platform_driver(jsl_pinctrl_driver);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("Intel Jasper Lake PCH pinctrl/GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/intel/pinctrl-lynxpoint.c b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
index e928742c7181..a45b8f2182fd 100644
--- a/drivers/pinctrl/intel/pinctrl-lynxpoint.c
+++ b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
@@ -794,11 +794,11 @@ static int lp_gpio_probe(struct platform_device *pdev)
 	const struct intel_pinctrl_soc_data *soc;
 	struct intel_pinctrl *lg;
 	struct gpio_chip *gc;
-	struct resource *io_rc, *irq_rc;
 	struct device *dev = &pdev->dev;
+	struct resource *io_rc;
 	void __iomem *regs;
 	unsigned int i;
-	int ret;
+	int irq, ret;
 
 	soc = (const struct intel_pinctrl_soc_data *)device_get_match_data(dev);
 	if (!soc)
@@ -870,8 +870,8 @@ static int lp_gpio_probe(struct platform_device *pdev)
 	gc->parent = dev;
 
 	/* set up interrupts  */
-	irq_rc = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (irq_rc && irq_rc->start) {
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq > 0) {
 		struct gpio_irq_chip *girq;
 
 		girq = &gc->irq;
@@ -884,7 +884,7 @@ static int lp_gpio_probe(struct platform_device *pdev)
 					     GFP_KERNEL);
 		if (!girq->parents)
 			return -ENOMEM;
-		girq->parents[0] = (unsigned int)irq_rc->start;
+		girq->parents[0] = irq;
 		girq->default_type = IRQ_TYPE_NONE;
 		girq->handler = handle_bad_irq;
 	}
diff --git a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c
index 330c8f077b73..4d7a86a5a37b 100644
--- a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c
+++ b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c
@@ -15,17 +15,18 @@
 
 #include "pinctrl-intel.h"
 
-#define SPT_PAD_OWN	0x020
-#define SPT_PADCFGLOCK	0x0a0
-#define SPT_HOSTSW_OWN	0x0d0
-#define SPT_GPI_IS	0x100
-#define SPT_GPI_IE	0x120
+#define SPT_PAD_OWN		0x020
+#define SPT_H_PADCFGLOCK	0x090
+#define SPT_LP_PADCFGLOCK	0x0a0
+#define SPT_HOSTSW_OWN		0x0d0
+#define SPT_GPI_IS		0x100
+#define SPT_GPI_IE		0x120
 
 #define SPT_COMMUNITY(b, s, e)				\
 	{						\
 		.barno = (b),				\
 		.padown_offset = SPT_PAD_OWN,		\
-		.padcfglock_offset = SPT_PADCFGLOCK,	\
+		.padcfglock_offset = SPT_LP_PADCFGLOCK,	\
 		.hostown_offset = SPT_HOSTSW_OWN,	\
 		.is_offset = SPT_GPI_IS,		\
 		.ie_offset = SPT_GPI_IE,		\
@@ -47,7 +48,7 @@
 	{						\
 		.barno = (b),				\
 		.padown_offset = SPT_PAD_OWN,		\
-		.padcfglock_offset = SPT_PADCFGLOCK,	\
+		.padcfglock_offset = SPT_H_PADCFGLOCK,	\
 		.hostown_offset = SPT_HOSTSW_OWN,	\
 		.is_offset = SPT_GPI_IS,		\
 		.ie_offset = SPT_GPI_IE,		\
diff --git a/drivers/pinctrl/intel/pinctrl-tigerlake.c b/drivers/pinctrl/intel/pinctrl-tigerlake.c
index 08a86f6fdea6..bcfd7548e282 100644
--- a/drivers/pinctrl/intel/pinctrl-tigerlake.c
+++ b/drivers/pinctrl/intel/pinctrl-tigerlake.c
@@ -21,8 +21,6 @@
 #define TGL_GPI_IS	0x100
 #define TGL_GPI_IE	0x120
 
-#define TGL_NO_GPIO	-1
-
 #define TGL_GPP(r, s, e, g)				\
 	{						\
 		.reg_num = (r),				\
@@ -342,30 +340,30 @@ static const struct pinctrl_pin_desc tgllp_pins[] = {
 };
 
 static const struct intel_padgroup tgllp_community0_gpps[] = {
-	TGL_GPP(0, 0, 25, 0),			/* GPP_B */
-	TGL_GPP(1, 26, 41, 32),			/* GPP_T */
-	TGL_GPP(2, 42, 66, 64),			/* GPP_A */
+	TGL_GPP(0, 0, 25, 0),				/* GPP_B */
+	TGL_GPP(1, 26, 41, 32),				/* GPP_T */
+	TGL_GPP(2, 42, 66, 64),				/* GPP_A */
 };
 
 static const struct intel_padgroup tgllp_community1_gpps[] = {
-	TGL_GPP(0, 67, 74, 96),			/* GPP_S */
-	TGL_GPP(1, 75, 98, 128),		/* GPP_H */
-	TGL_GPP(2, 99, 119, 160),		/* GPP_D */
-	TGL_GPP(3, 120, 143, 192),		/* GPP_U */
-	TGL_GPP(4, 144, 170, 224),		/* vGPIO */
+	TGL_GPP(0, 67, 74, 96),				/* GPP_S */
+	TGL_GPP(1, 75, 98, 128),			/* GPP_H */
+	TGL_GPP(2, 99, 119, 160),			/* GPP_D */
+	TGL_GPP(3, 120, 143, 192),			/* GPP_U */
+	TGL_GPP(4, 144, 170, 224),			/* vGPIO */
 };
 
 static const struct intel_padgroup tgllp_community4_gpps[] = {
-	TGL_GPP(0, 171, 194, 256),		/* GPP_C */
-	TGL_GPP(1, 195, 219, 288),		/* GPP_F */
-	TGL_GPP(2, 220, 225, TGL_NO_GPIO),	/* HVCMOS */
-	TGL_GPP(3, 226, 250, 320),		/* GPP_E */
-	TGL_GPP(4, 251, 259, TGL_NO_GPIO),	/* JTAG */
+	TGL_GPP(0, 171, 194, 256),			/* GPP_C */
+	TGL_GPP(1, 195, 219, 288),			/* GPP_F */
+	TGL_GPP(2, 220, 225, INTEL_GPIO_BASE_NOMAP),	/* HVCMOS */
+	TGL_GPP(3, 226, 250, 320),			/* GPP_E */
+	TGL_GPP(4, 251, 259, INTEL_GPIO_BASE_NOMAP),	/* JTAG */
 };
 
 static const struct intel_padgroup tgllp_community5_gpps[] = {
-	TGL_GPP(0, 260, 267, 352),		/* GPP_R */
-	TGL_GPP(1, 268, 276, TGL_NO_GPIO),	/* SPI */
+	TGL_GPP(0, 260, 267, 352),			/* GPP_R */
+	TGL_GPP(1, 268, 276, INTEL_GPIO_BASE_NOMAP),	/* SPI */
 };
 
 static const struct intel_community tgllp_communities[] = {
diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
index 701f9af63f5e..f32d3644c509 100644
--- a/drivers/pinctrl/mediatek/Kconfig
+++ b/drivers/pinctrl/mediatek/Kconfig
@@ -3,10 +3,12 @@ menu "MediaTek pinctrl drivers"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 
 config EINT_MTK
-	bool "MediaTek External Interrupt Support"
+	tristate "MediaTek External Interrupt Support"
 	depends on PINCTRL_MTK || PINCTRL_MTK_MOORE || PINCTRL_MTK_PARIS || COMPILE_TEST
 	select GPIOLIB
 	select IRQ_DOMAIN
+	default y if PINCTRL_MTK || PINCTRL_MTK_MOORE
+	default PINCTRL_MTK_PARIS
 
 config PINCTRL_MTK
 	bool
@@ -17,6 +19,9 @@ config PINCTRL_MTK
 	select EINT_MTK
 	select OF_GPIO
 
+config PINCTRL_MTK_V2
+	tristate
+
 config PINCTRL_MTK_MOORE
 	bool
 	depends on OF
@@ -25,15 +30,17 @@ config PINCTRL_MTK_MOORE
 	select GENERIC_PINMUX_FUNCTIONS
 	select GPIOLIB
 	select OF_GPIO
+	select PINCTRL_MTK_V2
 
 config PINCTRL_MTK_PARIS
-	bool
+	tristate
 	depends on OF
 	select PINMUX
 	select GENERIC_PINCONF
 	select GPIOLIB
 	select EINT_MTK
 	select OF_GPIO
+	select PINCTRL_MTK_V2
 
 # For ARMv7 SoCs
 config PINCTRL_MT2701
@@ -80,7 +87,7 @@ config PINCTRL_MT2712
 	select PINCTRL_MTK
 
 config PINCTRL_MT6765
-	bool "Mediatek MT6765 pin control"
+	tristate "Mediatek MT6765 pin control"
 	depends on OF
 	depends on ARM64 || COMPILE_TEST
 	default ARM64 && ARCH_MEDIATEK
diff --git a/drivers/pinctrl/mediatek/Makefile b/drivers/pinctrl/mediatek/Makefile
index a74325abd877..4b7132876e71 100644
--- a/drivers/pinctrl/mediatek/Makefile
+++ b/drivers/pinctrl/mediatek/Makefile
@@ -2,8 +2,9 @@
 # Core
 obj-$(CONFIG_EINT_MTK)		+= mtk-eint.o
 obj-$(CONFIG_PINCTRL_MTK)	+= pinctrl-mtk-common.o
-obj-$(CONFIG_PINCTRL_MTK_MOORE) += pinctrl-moore.o pinctrl-mtk-common-v2.o
-obj-$(CONFIG_PINCTRL_MTK_PARIS) += pinctrl-paris.o pinctrl-mtk-common-v2.o
+obj-$(CONFIG_PINCTRL_MTK_V2)	+= pinctrl-mtk-common-v2.o
+obj-$(CONFIG_PINCTRL_MTK_MOORE) += pinctrl-moore.o
+obj-$(CONFIG_PINCTRL_MTK_PARIS) += pinctrl-paris.o
 
 # SoC Drivers
 obj-$(CONFIG_PINCTRL_MT2701)	+= pinctrl-mt2701.o
diff --git a/drivers/pinctrl/mediatek/mtk-eint.c b/drivers/pinctrl/mediatek/mtk-eint.c
index 7e526bcf5e0b..22736f60c16c 100644
--- a/drivers/pinctrl/mediatek/mtk-eint.c
+++ b/drivers/pinctrl/mediatek/mtk-eint.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
+#include <linux/module.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 
@@ -379,6 +380,7 @@ int mtk_eint_do_suspend(struct mtk_eint *eint)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_eint_do_suspend);
 
 int mtk_eint_do_resume(struct mtk_eint *eint)
 {
@@ -386,6 +388,7 @@ int mtk_eint_do_resume(struct mtk_eint *eint)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_eint_do_resume);
 
 int mtk_eint_set_debounce(struct mtk_eint *eint, unsigned long eint_num,
 			  unsigned int debounce)
@@ -440,6 +443,7 @@ int mtk_eint_set_debounce(struct mtk_eint *eint, unsigned long eint_num,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_eint_set_debounce);
 
 int mtk_eint_find_irq(struct mtk_eint *eint, unsigned long eint_n)
 {
@@ -451,6 +455,7 @@ int mtk_eint_find_irq(struct mtk_eint *eint, unsigned long eint_n)
 
 	return irq;
 }
+EXPORT_SYMBOL_GPL(mtk_eint_find_irq);
 
 int mtk_eint_do_init(struct mtk_eint *eint)
 {
@@ -495,3 +500,7 @@ int mtk_eint_do_init(struct mtk_eint *eint)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_eint_do_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MediaTek EINT Driver");
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6765.c b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
index 905dae8c3fd8..2c59d3936256 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt6765.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
@@ -6,6 +6,7 @@
  *
  */
 
+#include <linux/module.h>
 #include "pinctrl-mtk-mt6765.h"
 #include "pinctrl-paris.h"
 
@@ -1103,3 +1104,6 @@ static int __init mt6765_pinctrl_init(void)
 	return platform_driver_register(&mt6765_pinctrl_driver);
 }
 arch_initcall(mt6765_pinctrl_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MediaTek MT6765 Pinctrl Driver");
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index d3169a87e1b3..6ea40b501328 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -12,6 +12,7 @@
 #include <linux/gpio/driver.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/of_irq.h>
 
 #include "mtk-eint.h"
@@ -204,6 +205,7 @@ int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_hw_set_value);
 
 int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
 		     int field, int *value)
@@ -223,6 +225,7 @@ int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_hw_get_value);
 
 static int mtk_xt_find_eint_num(struct mtk_pinctrl *hw, unsigned long eint_n)
 {
@@ -361,6 +364,7 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev)
 
 	return mtk_eint_do_init(hw->eint);
 }
+EXPORT_SYMBOL_GPL(mtk_build_eint);
 
 /* Revision 0 */
 int mtk_pinconf_bias_disable_set(struct mtk_pinctrl *hw,
@@ -380,6 +384,7 @@ int mtk_pinconf_bias_disable_set(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_set);
 
 int mtk_pinconf_bias_disable_get(struct mtk_pinctrl *hw,
 				 const struct mtk_pin_desc *desc, int *res)
@@ -402,6 +407,7 @@ int mtk_pinconf_bias_disable_get(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_get);
 
 int mtk_pinconf_bias_set(struct mtk_pinctrl *hw,
 			 const struct mtk_pin_desc *desc, bool pullup)
@@ -421,6 +427,7 @@ int mtk_pinconf_bias_set(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set);
 
 int mtk_pinconf_bias_get(struct mtk_pinctrl *hw,
 			 const struct mtk_pin_desc *desc, bool pullup, int *res)
@@ -440,6 +447,7 @@ int mtk_pinconf_bias_get(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get);
 
 /* Revision 1 */
 int mtk_pinconf_bias_disable_set_rev1(struct mtk_pinctrl *hw,
@@ -454,6 +462,7 @@ int mtk_pinconf_bias_disable_set_rev1(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_set_rev1);
 
 int mtk_pinconf_bias_disable_get_rev1(struct mtk_pinctrl *hw,
 				      const struct mtk_pin_desc *desc, int *res)
@@ -471,6 +480,7 @@ int mtk_pinconf_bias_disable_get_rev1(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_get_rev1);
 
 int mtk_pinconf_bias_set_rev1(struct mtk_pinctrl *hw,
 			      const struct mtk_pin_desc *desc, bool pullup)
@@ -490,6 +500,7 @@ int mtk_pinconf_bias_set_rev1(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_rev1);
 
 int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
 			      const struct mtk_pin_desc *desc, bool pullup,
@@ -515,6 +526,7 @@ int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_rev1);
 
 /* Combo for the following pull register type:
  * 1. PU + PD
@@ -715,6 +727,7 @@ int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
 out:
 	return err;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo);
 
 int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
 			      const struct mtk_pin_desc *desc,
@@ -735,6 +748,7 @@ int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
 out:
 	return err;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_combo);
 
 /* Revision 0 */
 int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
@@ -764,6 +778,7 @@ int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
 
 	return err;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_drive_set);
 
 int mtk_pinconf_drive_get(struct mtk_pinctrl *hw,
 			  const struct mtk_pin_desc *desc, int *val)
@@ -788,6 +803,7 @@ int mtk_pinconf_drive_get(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_drive_get);
 
 /* Revision 1 */
 int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw,
@@ -809,6 +825,7 @@ int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw,
 
 	return err;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_drive_set_rev1);
 
 int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
 			       const struct mtk_pin_desc *desc, int *val)
@@ -826,18 +843,21 @@ int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_drive_get_rev1);
 
 int mtk_pinconf_drive_set_raw(struct mtk_pinctrl *hw,
 			       const struct mtk_pin_desc *desc, u32 arg)
 {
 	return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV, arg);
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_drive_set_raw);
 
 int mtk_pinconf_drive_get_raw(struct mtk_pinctrl *hw,
 			       const struct mtk_pin_desc *desc, int *val)
 {
 	return mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, val);
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_drive_get_raw);
 
 int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
 			     const struct mtk_pin_desc *desc, bool pullup,
@@ -878,6 +898,7 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
 
 	return err;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_adv_pull_set);
 
 int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
 			     const struct mtk_pin_desc *desc, bool pullup,
@@ -920,6 +941,7 @@ int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_adv_pull_get);
 
 int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
 			      const struct mtk_pin_desc *desc, u32 arg)
@@ -946,6 +968,7 @@ int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
 
 	return err;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_set);
 
 int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
 			      const struct mtk_pin_desc *desc, u32 *val)
@@ -969,3 +992,4 @@ int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_get);
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 3853ec3a2a8e..90a432bf9fed 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/gpio/driver.h>
+#include <linux/module.h>
 #include <dt-bindings/pinctrl/mt65xx.h>
 #include "pinctrl-paris.h"
 
@@ -164,8 +165,6 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 	case MTK_PIN_CONFIG_PU_ADV:
 	case MTK_PIN_CONFIG_PD_ADV:
 		if (hw->soc->adv_pull_get) {
-			bool pullup;
-
 			pullup = param == MTK_PIN_CONFIG_PU_ADV;
 			err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
 		} else
@@ -633,6 +632,7 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
 
 	return len;
 }
+EXPORT_SYMBOL_GPL(mtk_pctrl_show_one_pin);
 
 #define PIN_DBG_BUF_SZ 96
 static void mtk_pctrl_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
@@ -1021,6 +1021,7 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mtk_paris_pinctrl_probe);
 
 static int mtk_paris_pinctrl_suspend(struct device *device)
 {
@@ -1040,3 +1041,6 @@ const struct dev_pm_ops mtk_paris_pinctrl_pm_ops = {
 	.suspend_noirq = mtk_paris_pinctrl_suspend,
 	.resume_noirq = mtk_paris_pinctrl_resume,
 };
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MediaTek Pinctrl Common Driver V2 Paris");
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index bbc919bef2bf..079f8ee8d353 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -549,6 +549,18 @@ static const struct pinconf_ops meson_pinconf_ops = {
 	.is_generic		= true,
 };
 
+static int meson_gpio_get_direction(struct gpio_chip *chip, unsigned gpio)
+{
+	struct meson_pinctrl *pc = gpiochip_get_data(chip);
+	int ret;
+
+	ret = meson_pinconf_get_output(pc, gpio);
+	if (ret < 0)
+		return ret;
+
+	return ret ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+}
+
 static int meson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
 	return meson_pinconf_set_output(gpiochip_get_data(chip), gpio, false);
@@ -591,6 +603,8 @@ static int meson_gpiolib_register(struct meson_pinctrl *pc)
 	pc->chip.parent = pc->dev;
 	pc->chip.request = gpiochip_generic_request;
 	pc->chip.free = gpiochip_generic_free;
+	pc->chip.set_config = gpiochip_generic_config;
+	pc->chip.get_direction = meson_gpio_get_direction;
 	pc->chip.direction_input = meson_gpio_direction_input;
 	pc->chip.direction_output = meson_gpio_direction_output;
 	pc->chip.get = meson_gpio_get;
diff --git a/drivers/pinctrl/nomadik/pinctrl-ab8505.c b/drivers/pinctrl/nomadik/pinctrl-ab8505.c
index 5e6e7d28390a..b93af1fb37f0 100644
--- a/drivers/pinctrl/nomadik/pinctrl-ab8505.c
+++ b/drivers/pinctrl/nomadik/pinctrl-ab8505.c
@@ -178,6 +178,7 @@ static const struct abx500_pingroup ab8505_groups[] = {
 	AB8505_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(uartrxdata_a_1, ABX500_ALT_A),
+	AB8505_PIN_GROUP(gpio50_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
index b9246e0b4fe2..acad3887cc74 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
@@ -691,18 +691,21 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
 	DB8500_PIN_GROUP(lcd_d8_d11_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(lcd_d12_d23_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(kp_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(kpskaskb_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(mc2_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(ssp1_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(ssp0_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(i2c0_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(ipgpio0_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(ipgpio1_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(modem_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(kp_a_2, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(msp2sck_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(msp2_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(mc4_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(mc1_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(mc1_a_2, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(mc1dir_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(hsir_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(hsit_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(hsit_a_2, NMK_GPIO_ALT_A),
@@ -760,7 +763,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
 	DB8500_PIN_GROUP(u0_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(ipgpio4_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(ipgpio5_c_1, NMK_GPIO_ALT_C),
-	DB8500_PIN_GROUP(ipgpio6_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio6_c_2, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(ipgpio7_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(smcleale_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(stmape_c_1, NMK_GPIO_ALT_C),
@@ -955,6 +958,7 @@ static const struct nmk_function nmk_db8500_functions[] = {
 	FUNCTION(spi0),
 	FUNCTION(spi2),
 	FUNCTION(remap),
+	FUNCTION(sbag),
 	FUNCTION(ptm),
 	FUNCTION(rf),
 	FUNCTION(hx),
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index ca7bbe4164c0..ba25c4654391 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1343,8 +1343,6 @@ static const struct nmk_cfg_param nmk_cfg_params[] = {
 
 static int nmk_dt_pin_config(int index, int val, unsigned long *config)
 {
-	int ret = 0;
-
 	if (nmk_cfg_params[index].choice == NULL)
 		*config = nmk_cfg_params[index].config;
 	else {
@@ -1354,7 +1352,7 @@ static int nmk_dt_pin_config(int index, int val, unsigned long *config)
 				nmk_cfg_params[index].choice[val];
 		}
 	}
-	return ret;
+	return 0;
 }
 
 static const char *nmk_find_pin_name(struct pinctrl_dev *pctldev, const char *pin_name)
diff --git a/drivers/pinctrl/pinctrl-bm1880.c b/drivers/pinctrl/pinctrl-bm1880.c
index f7dff4f14101..d1a7d9836787 100644
--- a/drivers/pinctrl/pinctrl-bm1880.c
+++ b/drivers/pinctrl/pinctrl-bm1880.c
@@ -408,6 +408,7 @@ static const struct bm1880_pctrl_group bm1880_pctrl_groups[] = {
 	BM1880_PINCTRL_GRP(pwm34),
 	BM1880_PINCTRL_GRP(pwm35),
 	BM1880_PINCTRL_GRP(pwm36),
+	BM1880_PINCTRL_GRP(pwm37),
 	BM1880_PINCTRL_GRP(i2c0),
 	BM1880_PINCTRL_GRP(i2c1),
 	BM1880_PINCTRL_GRP(i2c2),
diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c
index aa92f141b865..626e02d7a1ba 100644
--- a/drivers/pinctrl/pinctrl-lantiq.c
+++ b/drivers/pinctrl/pinctrl-lantiq.c
@@ -221,7 +221,7 @@ static int match_mux(const struct ltq_mfp_pin *mfp, unsigned mux)
 	return i;
 }
 
-/* dont assume .mfp is linearly mapped. find the mfp with the correct .pin */
+/* don't assume .mfp is linearly mapped. find the mfp with the correct .pin */
 static int match_mfp(const struct ltq_pinmux_info *info, int pin)
 {
 	int i;
diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index 3a235487e38d..151931b593f6 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -1,34 +1,23 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* MCP23S08 SPI/I2C GPIO driver */
 
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/export.h>
 #include <linux/gpio/driver.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mcp23s08.h>
 #include <linux/slab.h>
 #include <asm/byteorder.h>
 #include <linux/interrupt.h>
-#include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
 
-/*
- * MCP types supported by driver
- */
-#define MCP_TYPE_S08	0
-#define MCP_TYPE_S17	1
-#define MCP_TYPE_008	2
-#define MCP_TYPE_017	3
-#define MCP_TYPE_S18    4
-#define MCP_TYPE_018    5
-
-#define MCP_MAX_DEV_PER_CS	8
+#include "pinctrl-mcp23s08.h"
 
 /* Registers are all 8 bits wide.
  *
@@ -53,31 +42,6 @@
 #define MCP_GPIO	0x09
 #define MCP_OLAT	0x0a
 
-struct mcp23s08;
-
-struct mcp23s08 {
-	u8			addr;
-	bool			irq_active_high;
-	bool			reg_shift;
-
-	u16			irq_rise;
-	u16			irq_fall;
-	int			irq;
-	bool			irq_controller;
-	int			cached_gpio;
-	/* lock protects regmap access with bypass/cache flags */
-	struct mutex		lock;
-
-	struct gpio_chip	chip;
-	struct irq_chip		irq_chip;
-
-	struct regmap		*regmap;
-	struct device		*dev;
-
-	struct pinctrl_dev	*pctldev;
-	struct pinctrl_desc	pinctrl_desc;
-};
-
 static const struct reg_default mcp23x08_defaults[] = {
 	{.reg = MCP_IODIR,		.def = 0xff},
 	{.reg = MCP_IPOL,		.def = 0x00},
@@ -109,7 +73,7 @@ static const struct regmap_access_table mcp23x08_precious_table = {
 	.n_yes_ranges = 1,
 };
 
-static const struct regmap_config mcp23x08_regmap = {
+const struct regmap_config mcp23x08_regmap = {
 	.reg_bits = 8,
 	.val_bits = 8,
 
@@ -121,6 +85,7 @@ static const struct regmap_config mcp23x08_regmap = {
 	.cache_type = REGCACHE_FLAT,
 	.max_register = MCP_OLAT,
 };
+EXPORT_SYMBOL_GPL(mcp23x08_regmap);
 
 static const struct reg_default mcp23x16_defaults[] = {
 	{.reg = MCP_IODIR << 1,		.def = 0xffff},
@@ -153,7 +118,7 @@ static const struct regmap_access_table mcp23x16_precious_table = {
 	.n_yes_ranges = 1,
 };
 
-static const struct regmap_config mcp23x17_regmap = {
+const struct regmap_config mcp23x17_regmap = {
 	.reg_bits = 8,
 	.val_bits = 16,
 
@@ -166,6 +131,7 @@ static const struct regmap_config mcp23x17_regmap = {
 	.cache_type = REGCACHE_FLAT,
 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
+EXPORT_SYMBOL_GPL(mcp23x17_regmap);
 
 static int mcp_read(struct mcp23s08 *mcp, unsigned int reg, unsigned int *val)
 {
@@ -309,80 +275,6 @@ static const struct pinconf_ops mcp_pinconf_ops = {
 
 /*----------------------------------------------------------------------*/
 
-#ifdef CONFIG_SPI_MASTER
-
-static int mcp23sxx_spi_write(void *context, const void *data, size_t count)
-{
-	struct mcp23s08 *mcp = context;
-	struct spi_device *spi = to_spi_device(mcp->dev);
-	struct spi_message m;
-	struct spi_transfer t[2] = { { .tx_buf = &mcp->addr, .len = 1, },
-				     { .tx_buf = data, .len = count, }, };
-
-	spi_message_init(&m);
-	spi_message_add_tail(&t[0], &m);
-	spi_message_add_tail(&t[1], &m);
-
-	return spi_sync(spi, &m);
-}
-
-static int mcp23sxx_spi_gather_write(void *context,
-				const void *reg, size_t reg_size,
-				const void *val, size_t val_size)
-{
-	struct mcp23s08 *mcp = context;
-	struct spi_device *spi = to_spi_device(mcp->dev);
-	struct spi_message m;
-	struct spi_transfer t[3] = { { .tx_buf = &mcp->addr, .len = 1, },
-				     { .tx_buf = reg, .len = reg_size, },
-				     { .tx_buf = val, .len = val_size, }, };
-
-	spi_message_init(&m);
-	spi_message_add_tail(&t[0], &m);
-	spi_message_add_tail(&t[1], &m);
-	spi_message_add_tail(&t[2], &m);
-
-	return spi_sync(spi, &m);
-}
-
-static int mcp23sxx_spi_read(void *context, const void *reg, size_t reg_size,
-				void *val, size_t val_size)
-{
-	struct mcp23s08 *mcp = context;
-	struct spi_device *spi = to_spi_device(mcp->dev);
-	u8 tx[2];
-
-	if (reg_size != 1)
-		return -EINVAL;
-
-	tx[0] = mcp->addr | 0x01;
-	tx[1] = *((u8 *) reg);
-
-	return spi_write_then_read(spi, tx, sizeof(tx), val, val_size);
-}
-
-static const struct regmap_bus mcp23sxx_spi_regmap = {
-	.write = mcp23sxx_spi_write,
-	.gather_write = mcp23sxx_spi_gather_write,
-	.read = mcp23sxx_spi_read,
-};
-
-#endif /* CONFIG_SPI_MASTER */
-
-/*----------------------------------------------------------------------*/
-
-/* A given spi_device can represent up to eight mcp23sxx chips
- * sharing the same chipselect but using different addresses
- * (e.g. chips #0 and #3 might be populated, but not #1 or $2).
- * Driver data holds all the per-chip data.
- */
-struct mcp23s08_driver_data {
-	unsigned		ngpio;
-	struct mcp23s08		*mcp[8];
-	struct mcp23s08		chip[];
-};
-
-
 static int mcp23s08_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct mcp23s08	*mcp = gpiochip_get_data(chip);
@@ -562,7 +454,6 @@ static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
 	struct mcp23s08 *mcp = gpiochip_get_data(gc);
 	unsigned int pos = data->hwirq;
-	int status = 0;
 
 	if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
 		mcp_set_bit(mcp, MCP_INTCON, pos, false);
@@ -585,7 +476,7 @@ static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
 	} else
 		return -EINVAL;
 
-	return status;
+	return 0;
 }
 
 static void mcp23s08_irq_bus_lock(struct irq_data *data)
@@ -656,21 +547,25 @@ static int mcp23s08_irqchip_setup(struct mcp23s08 *mcp)
 
 /*----------------------------------------------------------------------*/
 
-static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
-			      void *data, unsigned addr, unsigned type,
-			      unsigned int base, int cs)
+int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
+		       unsigned int addr, unsigned int type, unsigned int base)
 {
 	int status, ret;
 	bool mirror = false;
 	bool open_drain = false;
-	struct regmap_config *one_regmap_config = NULL;
-	int raw_chip_address = (addr & ~0x40) >> 1;
 
 	mutex_init(&mcp->lock);
 
 	mcp->dev = dev;
 	mcp->addr = addr;
+
 	mcp->irq_active_high = false;
+	mcp->irq_chip.name = dev_name(dev);
+	mcp->irq_chip.irq_mask = mcp23s08_irq_mask;
+	mcp->irq_chip.irq_unmask = mcp23s08_irq_unmask;
+	mcp->irq_chip.irq_set_type = mcp23s08_irq_set_type;
+	mcp->irq_chip.irq_bus_lock = mcp23s08_irq_bus_lock;
+	mcp->irq_chip.irq_bus_sync_unlock = mcp23s08_irq_bus_unlock;
 
 	mcp->chip.direction_input = mcp23s08_direction_input;
 	mcp->chip.get = mcp23s08_get;
@@ -681,83 +576,6 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 	mcp->chip.of_node = dev->of_node;
 #endif
 
-	switch (type) {
-#ifdef CONFIG_SPI_MASTER
-	case MCP_TYPE_S08:
-	case MCP_TYPE_S17:
-		switch (type) {
-		case MCP_TYPE_S08:
-			one_regmap_config =
-				devm_kmemdup(dev, &mcp23x08_regmap,
-					sizeof(struct regmap_config), GFP_KERNEL);
-			mcp->reg_shift = 0;
-			mcp->chip.ngpio = 8;
-			mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL,
-					"mcp23s08.%d", raw_chip_address);
-			break;
-		case MCP_TYPE_S17:
-			one_regmap_config =
-				devm_kmemdup(dev, &mcp23x17_regmap,
-					sizeof(struct regmap_config), GFP_KERNEL);
-			mcp->reg_shift = 1;
-			mcp->chip.ngpio = 16;
-			mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL,
-					"mcp23s17.%d", raw_chip_address);
-			break;
-		}
-		if (!one_regmap_config)
-			return -ENOMEM;
-
-		one_regmap_config->name = devm_kasprintf(dev, GFP_KERNEL, "%d", raw_chip_address);
-		mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp,
-					       one_regmap_config);
-		break;
-
-	case MCP_TYPE_S18:
-		one_regmap_config =
-			devm_kmemdup(dev, &mcp23x17_regmap,
-				sizeof(struct regmap_config), GFP_KERNEL);
-		if (!one_regmap_config)
-			return -ENOMEM;
-		mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp,
-					       one_regmap_config);
-		mcp->reg_shift = 1;
-		mcp->chip.ngpio = 16;
-		mcp->chip.label = "mcp23s18";
-		break;
-#endif /* CONFIG_SPI_MASTER */
-
-#if IS_ENABLED(CONFIG_I2C)
-	case MCP_TYPE_008:
-		mcp->regmap = devm_regmap_init_i2c(data, &mcp23x08_regmap);
-		mcp->reg_shift = 0;
-		mcp->chip.ngpio = 8;
-		mcp->chip.label = "mcp23008";
-		break;
-
-	case MCP_TYPE_017:
-		mcp->regmap = devm_regmap_init_i2c(data, &mcp23x17_regmap);
-		mcp->reg_shift = 1;
-		mcp->chip.ngpio = 16;
-		mcp->chip.label = "mcp23017";
-		break;
-
-	case MCP_TYPE_018:
-		mcp->regmap = devm_regmap_init_i2c(data, &mcp23x17_regmap);
-		mcp->reg_shift = 1;
-		mcp->chip.ngpio = 16;
-		mcp->chip.label = "mcp23018";
-		break;
-#endif /* CONFIG_I2C */
-
-	default:
-		dev_err(dev, "invalid device type (%d)\n", type);
-		return -EINVAL;
-	}
-
-	if (IS_ERR(mcp->regmap))
-		return PTR_ERR(mcp->regmap);
-
 	mcp->chip.base = base;
 	mcp->chip.can_sleep = true;
 	mcp->chip.parent = dev;
@@ -816,14 +634,6 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 			goto fail;
 	}
 
-	if (one_regmap_config) {
-		mcp->pinctrl_desc.name = devm_kasprintf(dev, GFP_KERNEL,
-				"mcp23xxx-pinctrl.%d", raw_chip_address);
-		if (!mcp->pinctrl_desc.name)
-			return -ENOMEM;
-	} else {
-		mcp->pinctrl_desc.name = "mcp23xxx-pinctrl";
-	}
 	mcp->pinctrl_desc.pctlops = &mcp_pinctrl_ops;
 	mcp->pinctrl_desc.confops = &mcp_pinconf_ops;
 	mcp->pinctrl_desc.npins = mcp->chip.ngpio;
@@ -847,291 +657,5 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 		dev_dbg(dev, "can't setup chip %d, --> %d\n", addr, ret);
 	return ret;
 }
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_OF
-#ifdef CONFIG_SPI_MASTER
-static const struct of_device_id mcp23s08_spi_of_match[] = {
-	{
-		.compatible = "microchip,mcp23s08",
-		.data = (void *) MCP_TYPE_S08,
-	},
-	{
-		.compatible = "microchip,mcp23s17",
-		.data = (void *) MCP_TYPE_S17,
-	},
-	{
-		.compatible = "microchip,mcp23s18",
-		.data = (void *) MCP_TYPE_S18,
-	},
-/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
-	{
-		.compatible = "mcp,mcp23s08",
-		.data = (void *) MCP_TYPE_S08,
-	},
-	{
-		.compatible = "mcp,mcp23s17",
-		.data = (void *) MCP_TYPE_S17,
-	},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match);
-#endif
-
-#if IS_ENABLED(CONFIG_I2C)
-static const struct of_device_id mcp23s08_i2c_of_match[] = {
-	{
-		.compatible = "microchip,mcp23008",
-		.data = (void *) MCP_TYPE_008,
-	},
-	{
-		.compatible = "microchip,mcp23017",
-		.data = (void *) MCP_TYPE_017,
-	},
-	{
-		.compatible = "microchip,mcp23018",
-		.data = (void *) MCP_TYPE_018,
-	},
-/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
-	{
-		.compatible = "mcp,mcp23008",
-		.data = (void *) MCP_TYPE_008,
-	},
-	{
-		.compatible = "mcp,mcp23017",
-		.data = (void *) MCP_TYPE_017,
-	},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match);
-#endif
-#endif /* CONFIG_OF */
-
-
-#if IS_ENABLED(CONFIG_I2C)
-
-static int mcp230xx_probe(struct i2c_client *client,
-				    const struct i2c_device_id *id)
-{
-	struct mcp23s08_platform_data *pdata, local_pdata;
-	struct mcp23s08 *mcp;
-	int status;
-
-	pdata = dev_get_platdata(&client->dev);
-	if (!pdata) {
-		pdata = &local_pdata;
-		pdata->base = -1;
-	}
-
-	mcp = devm_kzalloc(&client->dev, sizeof(*mcp), GFP_KERNEL);
-	if (!mcp)
-		return -ENOMEM;
-
-	mcp->irq = client->irq;
-	mcp->irq_chip.name = dev_name(&client->dev);
-	mcp->irq_chip.irq_mask = mcp23s08_irq_mask;
-	mcp->irq_chip.irq_unmask = mcp23s08_irq_unmask;
-	mcp->irq_chip.irq_set_type = mcp23s08_irq_set_type;
-	mcp->irq_chip.irq_bus_lock = mcp23s08_irq_bus_lock;
-	mcp->irq_chip.irq_bus_sync_unlock = mcp23s08_irq_bus_unlock;
-
-	status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
-				    id->driver_data, pdata->base, 0);
-	if (status)
-		return status;
-
-	i2c_set_clientdata(client, mcp);
-
-	return 0;
-}
-
-static const struct i2c_device_id mcp230xx_id[] = {
-	{ "mcp23008", MCP_TYPE_008 },
-	{ "mcp23017", MCP_TYPE_017 },
-	{ "mcp23018", MCP_TYPE_018 },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, mcp230xx_id);
-
-static struct i2c_driver mcp230xx_driver = {
-	.driver = {
-		.name	= "mcp230xx",
-		.of_match_table = of_match_ptr(mcp23s08_i2c_of_match),
-	},
-	.probe		= mcp230xx_probe,
-	.id_table	= mcp230xx_id,
-};
-
-static int __init mcp23s08_i2c_init(void)
-{
-	return i2c_add_driver(&mcp230xx_driver);
-}
-
-static void mcp23s08_i2c_exit(void)
-{
-	i2c_del_driver(&mcp230xx_driver);
-}
-
-#else
-
-static int __init mcp23s08_i2c_init(void) { return 0; }
-static void mcp23s08_i2c_exit(void) { }
-
-#endif /* CONFIG_I2C */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SPI_MASTER
-
-static int mcp23s08_probe(struct spi_device *spi)
-{
-	struct mcp23s08_platform_data	*pdata, local_pdata;
-	unsigned			addr;
-	int				chips = 0;
-	struct mcp23s08_driver_data	*data;
-	int				status, type;
-	unsigned			ngpio = 0;
-	const struct			of_device_id *match;
-
-	match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev);
-	if (match)
-		type = (int)(uintptr_t)match->data;
-	else
-		type = spi_get_device_id(spi)->driver_data;
-
-	pdata = dev_get_platdata(&spi->dev);
-	if (!pdata) {
-		pdata = &local_pdata;
-		pdata->base = -1;
-
-		status = device_property_read_u32(&spi->dev,
-			"microchip,spi-present-mask", &pdata->spi_present_mask);
-		if (status) {
-			status = device_property_read_u32(&spi->dev,
-				"mcp,spi-present-mask",
-				&pdata->spi_present_mask);
-
-			if (status) {
-				dev_err(&spi->dev, "missing spi-present-mask");
-				return -ENODEV;
-			}
-		}
-	}
-
-	if (!pdata->spi_present_mask || pdata->spi_present_mask > 0xff) {
-		dev_err(&spi->dev, "invalid spi-present-mask");
-		return -ENODEV;
-	}
-
-	for (addr = 0; addr < MCP_MAX_DEV_PER_CS; addr++) {
-		if (pdata->spi_present_mask & BIT(addr))
-			chips++;
-	}
-
-	if (!chips)
-		return -ENODEV;
-
-	data = devm_kzalloc(&spi->dev,
-			    struct_size(data, chip, chips), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	spi_set_drvdata(spi, data);
-
-	for (addr = 0; addr < MCP_MAX_DEV_PER_CS; addr++) {
-		if (!(pdata->spi_present_mask & BIT(addr)))
-			continue;
-		chips--;
-		data->mcp[addr] = &data->chip[chips];
-		data->mcp[addr]->irq = spi->irq;
-		data->mcp[addr]->irq_chip.name = dev_name(&spi->dev);
-		data->mcp[addr]->irq_chip.irq_mask = mcp23s08_irq_mask;
-		data->mcp[addr]->irq_chip.irq_unmask = mcp23s08_irq_unmask;
-		data->mcp[addr]->irq_chip.irq_set_type = mcp23s08_irq_set_type;
-		data->mcp[addr]->irq_chip.irq_bus_lock = mcp23s08_irq_bus_lock;
-		data->mcp[addr]->irq_chip.irq_bus_sync_unlock =
-			mcp23s08_irq_bus_unlock;
-		status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi,
-					    0x40 | (addr << 1), type,
-					    pdata->base, addr);
-		if (status < 0)
-			return status;
-
-		if (pdata->base != -1)
-			pdata->base += data->mcp[addr]->chip.ngpio;
-		ngpio += data->mcp[addr]->chip.ngpio;
-	}
-	data->ngpio = ngpio;
-
-	return 0;
-}
-
-static const struct spi_device_id mcp23s08_ids[] = {
-	{ "mcp23s08", MCP_TYPE_S08 },
-	{ "mcp23s17", MCP_TYPE_S17 },
-	{ "mcp23s18", MCP_TYPE_S18 },
-	{ },
-};
-MODULE_DEVICE_TABLE(spi, mcp23s08_ids);
-
-static struct spi_driver mcp23s08_driver = {
-	.probe		= mcp23s08_probe,
-	.id_table	= mcp23s08_ids,
-	.driver = {
-		.name	= "mcp23s08",
-		.of_match_table = of_match_ptr(mcp23s08_spi_of_match),
-	},
-};
-
-static int __init mcp23s08_spi_init(void)
-{
-	return spi_register_driver(&mcp23s08_driver);
-}
-
-static void mcp23s08_spi_exit(void)
-{
-	spi_unregister_driver(&mcp23s08_driver);
-}
-
-#else
-
-static int __init mcp23s08_spi_init(void) { return 0; }
-static void mcp23s08_spi_exit(void) { }
-
-#endif /* CONFIG_SPI_MASTER */
-
-/*----------------------------------------------------------------------*/
-
-static int __init mcp23s08_init(void)
-{
-	int ret;
-
-	ret = mcp23s08_spi_init();
-	if (ret)
-		goto spi_fail;
-
-	ret = mcp23s08_i2c_init();
-	if (ret)
-		goto i2c_fail;
-
-	return 0;
-
- i2c_fail:
-	mcp23s08_spi_exit();
- spi_fail:
-	return ret;
-}
-/* register after spi/i2c postcore initcall and before
- * subsys initcalls that may rely on these GPIOs
- */
-subsys_initcall(mcp23s08_init);
-
-static void __exit mcp23s08_exit(void)
-{
-	mcp23s08_spi_exit();
-	mcp23s08_i2c_exit();
-}
-module_exit(mcp23s08_exit);
-
+EXPORT_SYMBOL_GPL(mcp23s08_probe_one);
 MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/pinctrl-mcp23s08.h b/drivers/pinctrl/pinctrl-mcp23s08.h
new file mode 100644
index 000000000000..90dc27081a3c
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mcp23s08.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* MCP23S08 SPI/I2C GPIO driver */
+
+#include <linux/gpio/driver.h>
+#include <linux/irq.h>
+#include <linux/mutex.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/types.h>
+
+/*
+ * MCP types supported by driver
+ */
+#define MCP_TYPE_S08	1
+#define MCP_TYPE_S17	2
+#define MCP_TYPE_008	3
+#define MCP_TYPE_017	4
+#define MCP_TYPE_S18	5
+#define MCP_TYPE_018	6
+
+struct device;
+struct regmap;
+
+struct pinctrl_dev;
+
+struct mcp23s08 {
+	u8			addr;
+	bool			irq_active_high;
+	bool			reg_shift;
+
+	u16			irq_rise;
+	u16			irq_fall;
+	int			irq;
+	bool			irq_controller;
+	int			cached_gpio;
+	/* lock protects regmap access with bypass/cache flags */
+	struct mutex		lock;
+
+	struct gpio_chip	chip;
+	struct irq_chip		irq_chip;
+
+	struct regmap		*regmap;
+	struct device		*dev;
+
+	struct pinctrl_dev	*pctldev;
+	struct pinctrl_desc	pinctrl_desc;
+};
+
+extern const struct regmap_config mcp23x08_regmap;
+extern const struct regmap_config mcp23x17_regmap;
+
+int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
+		       unsigned int addr, unsigned int type, unsigned int base);
diff --git a/drivers/pinctrl/pinctrl-mcp23s08_i2c.c b/drivers/pinctrl/pinctrl-mcp23s08_i2c.c
new file mode 100644
index 000000000000..e0b001c8c08c
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mcp23s08_i2c.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* MCP23S08 I2C GPIO driver */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "pinctrl-mcp23s08.h"
+
+static int mcp230xx_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	unsigned int type = id->driver_data;
+	struct mcp23s08 *mcp;
+	int ret;
+
+	mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL);
+	if (!mcp)
+		return -ENOMEM;
+
+	switch (type) {
+	case MCP_TYPE_008:
+		mcp->regmap = devm_regmap_init_i2c(client, &mcp23x08_regmap);
+		mcp->reg_shift = 0;
+		mcp->chip.ngpio = 8;
+		mcp->chip.label = "mcp23008";
+		break;
+
+	case MCP_TYPE_017:
+		mcp->regmap = devm_regmap_init_i2c(client, &mcp23x17_regmap);
+		mcp->reg_shift = 1;
+		mcp->chip.ngpio = 16;
+		mcp->chip.label = "mcp23017";
+		break;
+
+	case MCP_TYPE_018:
+		mcp->regmap = devm_regmap_init_i2c(client, &mcp23x17_regmap);
+		mcp->reg_shift = 1;
+		mcp->chip.ngpio = 16;
+		mcp->chip.label = "mcp23018";
+		break;
+
+	default:
+		dev_err(dev, "invalid device type (%d)\n", type);
+		return -EINVAL;
+	}
+
+	if (IS_ERR(mcp->regmap))
+		return PTR_ERR(mcp->regmap);
+
+	mcp->irq = client->irq;
+	mcp->pinctrl_desc.name = "mcp23xxx-pinctrl";
+
+	ret = mcp23s08_probe_one(mcp, dev, client->addr, type, -1);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, mcp);
+
+	return 0;
+}
+
+static const struct i2c_device_id mcp230xx_id[] = {
+	{ "mcp23008", MCP_TYPE_008 },
+	{ "mcp23017", MCP_TYPE_017 },
+	{ "mcp23018", MCP_TYPE_018 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcp230xx_id);
+
+static const struct of_device_id mcp23s08_i2c_of_match[] = {
+	{
+		.compatible = "microchip,mcp23008",
+		.data = (void *) MCP_TYPE_008,
+	},
+	{
+		.compatible = "microchip,mcp23017",
+		.data = (void *) MCP_TYPE_017,
+	},
+	{
+		.compatible = "microchip,mcp23018",
+		.data = (void *) MCP_TYPE_018,
+	},
+/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
+	{
+		.compatible = "mcp,mcp23008",
+		.data = (void *) MCP_TYPE_008,
+	},
+	{
+		.compatible = "mcp,mcp23017",
+		.data = (void *) MCP_TYPE_017,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match);
+
+static struct i2c_driver mcp230xx_driver = {
+	.driver = {
+		.name	= "mcp230xx",
+		.of_match_table = mcp23s08_i2c_of_match,
+	},
+	.probe		= mcp230xx_probe,
+	.id_table	= mcp230xx_id,
+};
+
+static int __init mcp23s08_i2c_init(void)
+{
+	return i2c_add_driver(&mcp230xx_driver);
+}
+
+/*
+ * Register after I²C postcore initcall and before
+ * subsys initcalls that may rely on these GPIOs.
+ */
+subsys_initcall(mcp23s08_i2c_init);
+
+static void mcp23s08_i2c_exit(void)
+{
+	i2c_del_driver(&mcp230xx_driver);
+}
+module_exit(mcp23s08_i2c_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/pinctrl-mcp23s08_spi.c b/drivers/pinctrl/pinctrl-mcp23s08_spi.c
new file mode 100644
index 000000000000..e06fb885fd2b
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mcp23s08_spi.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* MCP23S08 SPI GPIO driver */
+
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "pinctrl-mcp23s08.h"
+
+#define MCP_MAX_DEV_PER_CS	8
+
+/*
+ * A given spi_device can represent up to eight mcp23sxx chips
+ * sharing the same chipselect but using different addresses
+ * (e.g. chips #0 and #3 might be populated, but not #1 or #2).
+ * Driver data holds all the per-chip data.
+ */
+struct mcp23s08_driver_data {
+	unsigned		ngpio;
+	struct mcp23s08		*mcp[8];
+	struct mcp23s08		chip[];
+};
+
+static int mcp23sxx_spi_write(void *context, const void *data, size_t count)
+{
+	struct mcp23s08 *mcp = context;
+	struct spi_device *spi = to_spi_device(mcp->dev);
+	struct spi_message m;
+	struct spi_transfer t[2] = { { .tx_buf = &mcp->addr, .len = 1, },
+				     { .tx_buf = data, .len = count, }, };
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t[0], &m);
+	spi_message_add_tail(&t[1], &m);
+
+	return spi_sync(spi, &m);
+}
+
+static int mcp23sxx_spi_gather_write(void *context,
+				const void *reg, size_t reg_size,
+				const void *val, size_t val_size)
+{
+	struct mcp23s08 *mcp = context;
+	struct spi_device *spi = to_spi_device(mcp->dev);
+	struct spi_message m;
+	struct spi_transfer t[3] = { { .tx_buf = &mcp->addr, .len = 1, },
+				     { .tx_buf = reg, .len = reg_size, },
+				     { .tx_buf = val, .len = val_size, }, };
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t[0], &m);
+	spi_message_add_tail(&t[1], &m);
+	spi_message_add_tail(&t[2], &m);
+
+	return spi_sync(spi, &m);
+}
+
+static int mcp23sxx_spi_read(void *context, const void *reg, size_t reg_size,
+				void *val, size_t val_size)
+{
+	struct mcp23s08 *mcp = context;
+	struct spi_device *spi = to_spi_device(mcp->dev);
+	u8 tx[2];
+
+	if (reg_size != 1)
+		return -EINVAL;
+
+	tx[0] = mcp->addr | 0x01;
+	tx[1] = *((u8 *) reg);
+
+	return spi_write_then_read(spi, tx, sizeof(tx), val, val_size);
+}
+
+static const struct regmap_bus mcp23sxx_spi_regmap = {
+	.write = mcp23sxx_spi_write,
+	.gather_write = mcp23sxx_spi_gather_write,
+	.read = mcp23sxx_spi_read,
+};
+
+static int mcp23s08_spi_regmap_init(struct mcp23s08 *mcp, struct device *dev,
+				    unsigned int addr, unsigned int type)
+{
+	const struct regmap_config *config;
+	struct regmap_config *copy;
+	const char *name;
+
+	switch (type) {
+	case MCP_TYPE_S08:
+		mcp->reg_shift = 0;
+		mcp->chip.ngpio = 8;
+		mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL, "mcp23s08.%d", addr);
+
+		config = &mcp23x08_regmap;
+		name = devm_kasprintf(dev, GFP_KERNEL, "%d", addr);
+		break;
+
+	case MCP_TYPE_S17:
+		mcp->reg_shift = 1;
+		mcp->chip.ngpio = 16;
+		mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL, "mcp23s17.%d", addr);
+
+		config = &mcp23x17_regmap;
+		name = devm_kasprintf(dev, GFP_KERNEL, "%d", addr);
+		break;
+
+	case MCP_TYPE_S18:
+		mcp->reg_shift = 1;
+		mcp->chip.ngpio = 16;
+		mcp->chip.label = "mcp23s18";
+
+		config = &mcp23x17_regmap;
+		name = config->name;
+		break;
+
+	default:
+		dev_err(dev, "invalid device type (%d)\n", type);
+		return -EINVAL;
+	}
+
+	copy = devm_kmemdup(dev, &config, sizeof(config), GFP_KERNEL);
+	if (!copy)
+		return -ENOMEM;
+
+	copy->name = name;
+
+	mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp, copy);
+	if (IS_ERR(mcp->regmap))
+		return PTR_ERR(mcp->regmap);
+
+	return 0;
+}
+
+static int mcp23s08_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct mcp23s08_driver_data *data;
+	unsigned long spi_present_mask;
+	const void *match;
+	unsigned int addr;
+	unsigned int ngpio = 0;
+	int chips;
+	int type;
+	int ret;
+	u32 v;
+
+	match = device_get_match_data(dev);
+	if (match)
+		type = (int)(uintptr_t)match;
+	else
+		type = spi_get_device_id(spi)->driver_data;
+
+	ret = device_property_read_u32(dev, "microchip,spi-present-mask", &v);
+	if (ret) {
+		ret = device_property_read_u32(dev, "mcp,spi-present-mask", &v);
+		if (ret) {
+			dev_err(dev, "missing spi-present-mask");
+			return ret;
+		}
+	}
+	spi_present_mask = v;
+
+	if (!spi_present_mask || spi_present_mask >= BIT(MCP_MAX_DEV_PER_CS)) {
+		dev_err(dev, "invalid spi-present-mask");
+		return -ENODEV;
+	}
+
+	chips = hweight_long(spi_present_mask);
+
+	data = devm_kzalloc(dev, struct_size(data, chip, chips), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, data);
+
+	for_each_set_bit(addr, &spi_present_mask, MCP_MAX_DEV_PER_CS) {
+		data->mcp[addr] = &data->chip[--chips];
+		data->mcp[addr]->irq = spi->irq;
+
+		ret = mcp23s08_spi_regmap_init(data->mcp[addr], dev, addr, type);
+		if (ret)
+			return ret;
+
+		data->mcp[addr]->pinctrl_desc.name = devm_kasprintf(dev, GFP_KERNEL,
+								    "mcp23xxx-pinctrl.%d",
+								    addr);
+		if (!data->mcp[addr]->pinctrl_desc.name)
+			return -ENOMEM;
+
+		ret = mcp23s08_probe_one(data->mcp[addr], dev, 0x40 | (addr << 1), type, -1);
+		if (ret < 0)
+			return ret;
+
+		ngpio += data->mcp[addr]->chip.ngpio;
+	}
+	data->ngpio = ngpio;
+
+	return 0;
+}
+
+static const struct spi_device_id mcp23s08_ids[] = {
+	{ "mcp23s08", MCP_TYPE_S08 },
+	{ "mcp23s17", MCP_TYPE_S17 },
+	{ "mcp23s18", MCP_TYPE_S18 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, mcp23s08_ids);
+
+static const struct of_device_id mcp23s08_spi_of_match[] = {
+	{
+		.compatible = "microchip,mcp23s08",
+		.data = (void *) MCP_TYPE_S08,
+	},
+	{
+		.compatible = "microchip,mcp23s17",
+		.data = (void *) MCP_TYPE_S17,
+	},
+	{
+		.compatible = "microchip,mcp23s18",
+		.data = (void *) MCP_TYPE_S18,
+	},
+/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
+	{
+		.compatible = "mcp,mcp23s08",
+		.data = (void *) MCP_TYPE_S08,
+	},
+	{
+		.compatible = "mcp,mcp23s17",
+		.data = (void *) MCP_TYPE_S17,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match);
+
+static struct spi_driver mcp23s08_driver = {
+	.probe		= mcp23s08_probe,
+	.id_table	= mcp23s08_ids,
+	.driver = {
+		.name	= "mcp23s08",
+		.of_match_table = mcp23s08_spi_of_match,
+	},
+};
+
+static int __init mcp23s08_spi_init(void)
+{
+	return spi_register_driver(&mcp23s08_driver);
+}
+
+/*
+ * Register after SPI postcore initcall and before
+ * subsys initcalls that may rely on these GPIOs.
+ */
+subsys_initcall(mcp23s08_spi_init);
+
+static void mcp23s08_spi_exit(void)
+{
+	spi_unregister_driver(&mcp23s08_driver);
+}
+module_exit(mcp23s08_spi_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
index 60100b45f5e5..1aae803c12cd 100644
--- a/drivers/pinctrl/pinctrl-stmfx.c
+++ b/drivers/pinctrl/pinctrl-stmfx.c
@@ -288,7 +288,7 @@ static int stmfx_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 	struct pinctrl_gpio_range *range;
 	enum pin_config_param param;
 	u32 arg;
-	int dir, i, ret;
+	int i, ret;
 
 	range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin);
 	if (!range) {
@@ -296,10 +296,6 @@ static int stmfx_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 		return -EINVAL;
 	}
 
-	dir = stmfx_gpio_get_direction(&pctl->gpio_chip, pin);
-	if (dir < 0)
-		return dir;
-
 	for (i = 0; i < num_configs; i++) {
 		param = pinconf_to_config_param(configs[i]);
 		arg = pinconf_to_config_argument(configs[i]);
diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c
index 6e74bd87d959..708bc91862fe 100644
--- a/drivers/pinctrl/pinctrl-sx150x.c
+++ b/drivers/pinctrl/pinctrl-sx150x.c
@@ -988,7 +988,7 @@ static unsigned int sx150x_maybe_swizzle(struct sx150x_pinctrl *pctl,
 /*
  * In order to mask the differences between 16 and 8 bit expander
  * devices we set up a sligthly ficticious regmap that pretends to be
- * a set of 32-bit (to accomodate RegSenseLow/RegSenseHigh
+ * a set of 32-bit (to accommodate RegSenseLow/RegSenseHigh
  * pair/quartet) registers and transparently reconstructs those
  * registers via multiple I2C/SMBus reads
  *
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index c5d4428f1f94..ff1ee159dca2 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -216,4 +216,13 @@ config PINCTRL_SM8150
 	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
 	 Technologies Inc SM8150 platform.
 
+config PINCTRL_SM8250
+	tristate "Qualcomm Technologies Inc SM8250 pin controller driver"
+	depends on GPIOLIB && OF
+	select PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm Technologies Inc TLMM block found on the Qualcomm
+	  Technologies Inc SM8250 platform.
+
 endif
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index d9e09045a776..061ec9fb659b 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -26,3 +26,4 @@ obj-$(CONFIG_PINCTRL_SC7180)	+= pinctrl-sc7180.o
 obj-$(CONFIG_PINCTRL_SDM660)   += pinctrl-sdm660.o
 obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
 obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
+obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 9a398a211d30..29259fee09ba 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -23,7 +23,6 @@
 #include <linux/pm.h>
 #include <linux/log2.h>
 #include <linux/qcom_scm.h>
-#include <linux/io.h>
 
 #include <linux/soc/qcom/irq.h>
 
@@ -697,7 +696,7 @@ static void msm_gpio_update_dual_edge_pos(struct msm_pinctrl *pctrl,
 
 		pol = msm_readl_intr_cfg(pctrl, g);
 		pol ^= BIT(g->intr_polarity_bit);
-		msm_writel_intr_cfg(val, pctrl, g);
+		msm_writel_intr_cfg(pol, pctrl, g);
 
 		val2 = msm_readl_io(pctrl, g) & BIT(g->in_bit);
 		intstat = msm_readl_intr_status(pctrl, g);
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250.c b/drivers/pinctrl/qcom/pinctrl-sm8250.c
new file mode 100644
index 000000000000..a660f1274b66
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250.c
@@ -0,0 +1,1361 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+static const char * const sm8250_tiles[] = {
+	"west",
+	"south",
+	"north",
+};
+
+enum {
+	WEST,
+	SOUTH,
+	NORTH,
+};
+
+#define FUNCTION(fname)					\
+	[msm_mux_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define REG_SIZE 0x1000
+#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+	{						\
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			msm_mux_gpio, /* gpio mode */	\
+			msm_mux_##f1,			\
+			msm_mux_##f2,			\
+			msm_mux_##f3,			\
+			msm_mux_##f4,			\
+			msm_mux_##f5,			\
+			msm_mux_##f6,			\
+			msm_mux_##f7,			\
+			msm_mux_##f8,			\
+			msm_mux_##f9			\
+		},					\
+		.nfuncs = 10,				\
+		.ctl_reg = REG_SIZE * id,		\
+		.io_reg = REG_SIZE * id + 0x4,		\
+		.intr_cfg_reg = REG_SIZE * id + 0x8,	\
+		.intr_status_reg = REG_SIZE * id + 0xc,	\
+		.intr_target_reg = REG_SIZE * id + 0x8,	\
+		.tile = _tile,				\
+		.mux_bit = 2,				\
+		.pull_bit = 0,				\
+		.drv_bit = 6,				\
+		.oe_bit = 9,				\
+		.in_bit = 0,				\
+		.out_bit = 1,				\
+		.intr_enable_bit = 0,			\
+		.intr_status_bit = 0,			\
+		.intr_target_bit = 5,			\
+		.intr_target_kpss_val = 3,		\
+		.intr_raw_status_bit = 4,		\
+		.intr_polarity_bit = 1,			\
+		.intr_detection_bit = 2,		\
+		.intr_detection_width = 2,		\
+	}
+
+#define SDC_PINGROUP(pg_name, ctl, pull, drv)	\
+	{						\
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.tile = NORTH,				\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+#define UFS_RESET(pg_name, offset)				\
+	{						\
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = offset,			\
+		.io_reg = offset + 0x4,			\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.tile = SOUTH,				\
+		.mux_bit = -1,				\
+		.pull_bit = 3,				\
+		.drv_bit = 0,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = 0,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+static const struct pinctrl_pin_desc sm8250_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+	PINCTRL_PIN(80, "GPIO_80"),
+	PINCTRL_PIN(81, "GPIO_81"),
+	PINCTRL_PIN(82, "GPIO_82"),
+	PINCTRL_PIN(83, "GPIO_83"),
+	PINCTRL_PIN(84, "GPIO_84"),
+	PINCTRL_PIN(85, "GPIO_85"),
+	PINCTRL_PIN(86, "GPIO_86"),
+	PINCTRL_PIN(87, "GPIO_87"),
+	PINCTRL_PIN(88, "GPIO_88"),
+	PINCTRL_PIN(89, "GPIO_89"),
+	PINCTRL_PIN(90, "GPIO_90"),
+	PINCTRL_PIN(91, "GPIO_91"),
+	PINCTRL_PIN(92, "GPIO_92"),
+	PINCTRL_PIN(93, "GPIO_93"),
+	PINCTRL_PIN(94, "GPIO_94"),
+	PINCTRL_PIN(95, "GPIO_95"),
+	PINCTRL_PIN(96, "GPIO_96"),
+	PINCTRL_PIN(97, "GPIO_97"),
+	PINCTRL_PIN(98, "GPIO_98"),
+	PINCTRL_PIN(99, "GPIO_99"),
+	PINCTRL_PIN(100, "GPIO_100"),
+	PINCTRL_PIN(101, "GPIO_101"),
+	PINCTRL_PIN(102, "GPIO_102"),
+	PINCTRL_PIN(103, "GPIO_103"),
+	PINCTRL_PIN(104, "GPIO_104"),
+	PINCTRL_PIN(105, "GPIO_105"),
+	PINCTRL_PIN(106, "GPIO_106"),
+	PINCTRL_PIN(107, "GPIO_107"),
+	PINCTRL_PIN(108, "GPIO_108"),
+	PINCTRL_PIN(109, "GPIO_109"),
+	PINCTRL_PIN(110, "GPIO_110"),
+	PINCTRL_PIN(111, "GPIO_111"),
+	PINCTRL_PIN(112, "GPIO_112"),
+	PINCTRL_PIN(113, "GPIO_113"),
+	PINCTRL_PIN(114, "GPIO_114"),
+	PINCTRL_PIN(115, "GPIO_115"),
+	PINCTRL_PIN(116, "GPIO_116"),
+	PINCTRL_PIN(117, "GPIO_117"),
+	PINCTRL_PIN(118, "GPIO_118"),
+	PINCTRL_PIN(119, "GPIO_119"),
+	PINCTRL_PIN(120, "GPIO_120"),
+	PINCTRL_PIN(121, "GPIO_121"),
+	PINCTRL_PIN(122, "GPIO_122"),
+	PINCTRL_PIN(123, "GPIO_123"),
+	PINCTRL_PIN(124, "GPIO_124"),
+	PINCTRL_PIN(125, "GPIO_125"),
+	PINCTRL_PIN(126, "GPIO_126"),
+	PINCTRL_PIN(127, "GPIO_127"),
+	PINCTRL_PIN(128, "GPIO_128"),
+	PINCTRL_PIN(129, "GPIO_129"),
+	PINCTRL_PIN(130, "GPIO_130"),
+	PINCTRL_PIN(131, "GPIO_131"),
+	PINCTRL_PIN(132, "GPIO_132"),
+	PINCTRL_PIN(133, "GPIO_133"),
+	PINCTRL_PIN(134, "GPIO_134"),
+	PINCTRL_PIN(135, "GPIO_135"),
+	PINCTRL_PIN(136, "GPIO_136"),
+	PINCTRL_PIN(137, "GPIO_137"),
+	PINCTRL_PIN(138, "GPIO_138"),
+	PINCTRL_PIN(139, "GPIO_139"),
+	PINCTRL_PIN(140, "GPIO_140"),
+	PINCTRL_PIN(141, "GPIO_141"),
+	PINCTRL_PIN(142, "GPIO_142"),
+	PINCTRL_PIN(143, "GPIO_143"),
+	PINCTRL_PIN(144, "GPIO_144"),
+	PINCTRL_PIN(145, "GPIO_145"),
+	PINCTRL_PIN(146, "GPIO_146"),
+	PINCTRL_PIN(147, "GPIO_147"),
+	PINCTRL_PIN(148, "GPIO_148"),
+	PINCTRL_PIN(149, "GPIO_149"),
+	PINCTRL_PIN(150, "GPIO_150"),
+	PINCTRL_PIN(151, "GPIO_151"),
+	PINCTRL_PIN(152, "GPIO_152"),
+	PINCTRL_PIN(153, "GPIO_153"),
+	PINCTRL_PIN(154, "GPIO_154"),
+	PINCTRL_PIN(155, "GPIO_155"),
+	PINCTRL_PIN(156, "GPIO_156"),
+	PINCTRL_PIN(157, "GPIO_157"),
+	PINCTRL_PIN(158, "GPIO_158"),
+	PINCTRL_PIN(159, "GPIO_159"),
+	PINCTRL_PIN(160, "GPIO_160"),
+	PINCTRL_PIN(161, "GPIO_161"),
+	PINCTRL_PIN(162, "GPIO_162"),
+	PINCTRL_PIN(163, "GPIO_163"),
+	PINCTRL_PIN(164, "GPIO_164"),
+	PINCTRL_PIN(165, "GPIO_165"),
+	PINCTRL_PIN(166, "GPIO_166"),
+	PINCTRL_PIN(167, "GPIO_167"),
+	PINCTRL_PIN(168, "GPIO_168"),
+	PINCTRL_PIN(169, "GPIO_169"),
+	PINCTRL_PIN(170, "GPIO_170"),
+	PINCTRL_PIN(171, "GPIO_171"),
+	PINCTRL_PIN(172, "GPIO_172"),
+	PINCTRL_PIN(173, "GPIO_173"),
+	PINCTRL_PIN(174, "GPIO_174"),
+	PINCTRL_PIN(175, "GPIO_175"),
+	PINCTRL_PIN(176, "GPIO_176"),
+	PINCTRL_PIN(177, "GPIO_177"),
+	PINCTRL_PIN(178, "GPIO_178"),
+	PINCTRL_PIN(179, "GPIO_179"),
+	PINCTRL_PIN(180, "SDC2_CLK"),
+	PINCTRL_PIN(181, "SDC2_CMD"),
+	PINCTRL_PIN(182, "SDC2_DATA"),
+	PINCTRL_PIN(183, "UFS_RESET"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+DECLARE_MSM_GPIO_PINS(136);
+DECLARE_MSM_GPIO_PINS(137);
+DECLARE_MSM_GPIO_PINS(138);
+DECLARE_MSM_GPIO_PINS(139);
+DECLARE_MSM_GPIO_PINS(140);
+DECLARE_MSM_GPIO_PINS(141);
+DECLARE_MSM_GPIO_PINS(142);
+DECLARE_MSM_GPIO_PINS(143);
+DECLARE_MSM_GPIO_PINS(144);
+DECLARE_MSM_GPIO_PINS(145);
+DECLARE_MSM_GPIO_PINS(146);
+DECLARE_MSM_GPIO_PINS(147);
+DECLARE_MSM_GPIO_PINS(148);
+DECLARE_MSM_GPIO_PINS(149);
+DECLARE_MSM_GPIO_PINS(150);
+DECLARE_MSM_GPIO_PINS(151);
+DECLARE_MSM_GPIO_PINS(152);
+DECLARE_MSM_GPIO_PINS(153);
+DECLARE_MSM_GPIO_PINS(154);
+DECLARE_MSM_GPIO_PINS(155);
+DECLARE_MSM_GPIO_PINS(156);
+DECLARE_MSM_GPIO_PINS(157);
+DECLARE_MSM_GPIO_PINS(158);
+DECLARE_MSM_GPIO_PINS(159);
+DECLARE_MSM_GPIO_PINS(160);
+DECLARE_MSM_GPIO_PINS(161);
+DECLARE_MSM_GPIO_PINS(162);
+DECLARE_MSM_GPIO_PINS(163);
+DECLARE_MSM_GPIO_PINS(164);
+DECLARE_MSM_GPIO_PINS(165);
+DECLARE_MSM_GPIO_PINS(166);
+DECLARE_MSM_GPIO_PINS(167);
+DECLARE_MSM_GPIO_PINS(168);
+DECLARE_MSM_GPIO_PINS(169);
+DECLARE_MSM_GPIO_PINS(170);
+DECLARE_MSM_GPIO_PINS(171);
+DECLARE_MSM_GPIO_PINS(172);
+DECLARE_MSM_GPIO_PINS(173);
+DECLARE_MSM_GPIO_PINS(174);
+DECLARE_MSM_GPIO_PINS(175);
+DECLARE_MSM_GPIO_PINS(176);
+DECLARE_MSM_GPIO_PINS(177);
+DECLARE_MSM_GPIO_PINS(178);
+DECLARE_MSM_GPIO_PINS(179);
+
+static const unsigned int ufs_reset_pins[] = { 180 };
+static const unsigned int sdc2_clk_pins[] = { 181 };
+static const unsigned int sdc2_cmd_pins[] = { 182 };
+static const unsigned int sdc2_data_pins[] = { 183 };
+
+enum sm8250_functions {
+	msm_mux_aoss_cti,
+	msm_mux_atest,
+	msm_mux_audio_ref,
+	msm_mux_cam_mclk,
+	msm_mux_cci_async,
+	msm_mux_cci_i2c,
+	msm_mux_cci_timer0,
+	msm_mux_cci_timer1,
+	msm_mux_cci_timer2,
+	msm_mux_cci_timer3,
+	msm_mux_cci_timer4,
+	msm_mux_cri_trng,
+	msm_mux_cri_trng0,
+	msm_mux_cri_trng1,
+	msm_mux_dbg_out,
+	msm_mux_ddr_bist,
+	msm_mux_ddr_pxi0,
+	msm_mux_ddr_pxi1,
+	msm_mux_ddr_pxi2,
+	msm_mux_ddr_pxi3,
+	msm_mux_dp_hot,
+	msm_mux_dp_lcd,
+	msm_mux_gcc_gp1,
+	msm_mux_gcc_gp2,
+	msm_mux_gcc_gp3,
+	msm_mux_gpio,
+	msm_mux_ibi_i3c,
+	msm_mux_jitter_bist,
+	msm_mux_lpass_slimbus,
+	msm_mux_mdp_vsync,
+	msm_mux_mdp_vsync0,
+	msm_mux_mdp_vsync1,
+	msm_mux_mdp_vsync2,
+	msm_mux_mdp_vsync3,
+	msm_mux_mi2s0_data0,
+	msm_mux_mi2s0_data1,
+	msm_mux_mi2s0_sck,
+	msm_mux_mi2s0_ws,
+	msm_mux_mi2s1_data0,
+	msm_mux_mi2s1_data1,
+	msm_mux_mi2s1_sck,
+	msm_mux_mi2s1_ws,
+	msm_mux_mi2s2_data0,
+	msm_mux_mi2s2_data1,
+	msm_mux_mi2s2_sck,
+	msm_mux_mi2s2_ws,
+	msm_mux_pci_e0,
+	msm_mux_pci_e1,
+	msm_mux_pci_e2,
+	msm_mux_phase_flag,
+	msm_mux_pll_bist,
+	msm_mux_pll_bypassnl,
+	msm_mux_pll_clk,
+	msm_mux_pll_reset,
+	msm_mux_pri_mi2s,
+	msm_mux_prng_rosc,
+	msm_mux_qdss_cti,
+	msm_mux_qdss_gpio,
+	msm_mux_qspi0,
+	msm_mux_qspi1,
+	msm_mux_qspi2,
+	msm_mux_qspi3,
+	msm_mux_qspi_clk,
+	msm_mux_qspi_cs,
+	msm_mux_qup0,
+	msm_mux_qup1,
+	msm_mux_qup10,
+	msm_mux_qup11,
+	msm_mux_qup12,
+	msm_mux_qup13,
+	msm_mux_qup14,
+	msm_mux_qup15,
+	msm_mux_qup16,
+	msm_mux_qup17,
+	msm_mux_qup18,
+	msm_mux_qup19,
+	msm_mux_qup2,
+	msm_mux_qup3,
+	msm_mux_qup4,
+	msm_mux_qup5,
+	msm_mux_qup6,
+	msm_mux_qup7,
+	msm_mux_qup8,
+	msm_mux_qup9,
+	msm_mux_qup_l4,
+	msm_mux_qup_l5,
+	msm_mux_qup_l6,
+	msm_mux_sd_write,
+	msm_mux_sdc40,
+	msm_mux_sdc41,
+	msm_mux_sdc42,
+	msm_mux_sdc43,
+	msm_mux_sdc4_clk,
+	msm_mux_sdc4_cmd,
+	msm_mux_sec_mi2s,
+	msm_mux_sp_cmu,
+	msm_mux_tgu_ch0,
+	msm_mux_tgu_ch1,
+	msm_mux_tgu_ch2,
+	msm_mux_tgu_ch3,
+	msm_mux_tsense_pwm1,
+	msm_mux_tsense_pwm2,
+	msm_mux_tsif0_clk,
+	msm_mux_tsif0_data,
+	msm_mux_tsif0_en,
+	msm_mux_tsif0_error,
+	msm_mux_tsif0_sync,
+	msm_mux_tsif1_clk,
+	msm_mux_tsif1_data,
+	msm_mux_tsif1_en,
+	msm_mux_tsif1_error,
+	msm_mux_tsif1_sync,
+	msm_mux_usb2phy_ac,
+	msm_mux_usb_phy,
+	msm_mux_vsense_trigger,
+	msm_mux__,
+};
+
+static const char * const tsif1_data_groups[] = {
+	"gpio75",
+};
+static const char * const sdc41_groups[] = {
+	"gpio75",
+};
+static const char * const tsif1_sync_groups[] = {
+	"gpio76",
+};
+static const char * const sdc40_groups[] = {
+	"gpio76",
+};
+static const char * const aoss_cti_groups[] = {
+	"gpio77",
+};
+static const char * const phase_flag_groups[] = {
+	"gpio45", "gpio46", "gpio47", "gpio48", "gpio49", "gpio50", "gpio51",
+	"gpio69", "gpio70", "gpio71", "gpio72", "gpio73", "gpio74", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio103", "gpio104", "gpio115", "gpio116", "gpio117", "gpio118",
+	"gpio119", "gpio120", "gpio122", "gpio124", "gpio125",
+};
+static const char * const sd_write_groups[] = {
+	"gpio78",
+};
+static const char * const pci_e0_groups[] = {
+	"gpio79", "gpio80",
+};
+static const char * const pci_e1_groups[] = {
+	"gpio82", "gpio83",
+};
+static const char * const pci_e2_groups[] = {
+	"gpio85", "gpio86",
+};
+static const char * const tgu_ch0_groups[] = {
+	"gpio85",
+};
+static const char * const atest_groups[] = {
+	"gpio24", "gpio25", "gpio26", "gpio27", "gpio32", "gpio33", "gpio34",
+	"gpio35", "gpio36", "gpio37", "gpio85", "gpio86", "gpio87", "gpio88",
+	"gpio89",
+};
+static const char * const tgu_ch3_groups[] = {
+	"gpio86",
+};
+static const char * const tsif1_error_groups[] = {
+	"gpio90",
+};
+static const char * const tgu_ch1_groups[] = {
+	"gpio90",
+};
+static const char * const tsif0_error_groups[] = {
+	"gpio91",
+};
+static const char * const tgu_ch2_groups[] = {
+	"gpio91",
+};
+static const char * const cam_mclk_groups[] = {
+	"gpio94", "gpio95", "gpio96", "gpio97", "gpio98", "gpio99", "gpio100",
+};
+static const char * const ddr_bist_groups[] = {
+	"gpio94", "gpio95", "gpio143", "gpio144",
+};
+static const char * const pll_bypassnl_groups[] = {
+	"gpio96",
+};
+static const char * const pll_reset_groups[] = {
+	"gpio97",
+};
+static const char * const cci_i2c_groups[] = {
+	"gpio101", "gpio102", "gpio103", "gpio104", "gpio105", "gpio106",
+	"gpio107", "gpio108",
+};
+static const char * const qdss_gpio_groups[] = {
+	"gpio94", "gpio95", "gpio96", "gpio97", "gpio98", "gpio99", "gpio100",
+	"gpio101", "gpio102", "gpio103", "gpio104", "gpio105", "gpio106",
+	"gpio107", "gpio108", "gpio109", "gpio110", "gpio111", "gpio160",
+	"gpio161", "gpio162", "gpio163", "gpio164", "gpio165", "gpio166",
+	"gpio167", "gpio168", "gpio169", "gpio170", "gpio171", "gpio172",
+	"gpio173", "gpio174", "gpio175", "gpio176", "gpio177",
+};
+static const char * const gcc_gp1_groups[] = {
+	"gpio106", "gpio136",
+};
+static const char * const gcc_gp2_groups[] = {
+	"gpio107", "gpio137",
+};
+static const char * const gcc_gp3_groups[] = {
+	"gpio108", "gpio138",
+};
+static const char * const cci_timer0_groups[] = {
+	"gpio109",
+};
+static const char * const cci_timer1_groups[] = {
+	"gpio110",
+};
+static const char * const cci_timer2_groups[] = {
+	"gpio111",
+};
+static const char * const cci_timer3_groups[] = {
+	"gpio112",
+};
+static const char * const cci_async_groups[] = {
+	"gpio112", "gpio113", "gpio114",
+};
+static const char * const cci_timer4_groups[] = {
+	"gpio113",
+};
+static const char * const qup2_groups[] = {
+	"gpio115", "gpio116", "gpio117", "gpio118",
+};
+static const char * const qup3_groups[] = {
+	"gpio119", "gpio120", "gpio121", "gpio122",
+};
+static const char * const tsense_pwm1_groups[] = {
+	"gpio123",
+};
+static const char * const tsense_pwm2_groups[] = {
+	"gpio123",
+};
+static const char * const qup9_groups[] = {
+	"gpio125", "gpio126", "gpio127", "gpio128",
+};
+static const char * const qup10_groups[] = {
+	"gpio129", "gpio130", "gpio131", "gpio132",
+};
+static const char * const mi2s2_sck_groups[] = {
+	"gpio133",
+};
+static const char * const mi2s2_data0_groups[] = {
+	"gpio134",
+};
+static const char * const mi2s2_ws_groups[] = {
+	"gpio135",
+};
+static const char * const pri_mi2s_groups[] = {
+	"gpio136",
+};
+static const char * const sec_mi2s_groups[] = {
+	"gpio137",
+};
+static const char * const audio_ref_groups[] = {
+	"gpio137",
+};
+static const char * const mi2s2_data1_groups[] = {
+	"gpio137",
+};
+static const char * const mi2s0_sck_groups[] = {
+	"gpio138",
+};
+static const char * const mi2s0_data0_groups[] = {
+	"gpio139",
+};
+static const char * const mi2s0_data1_groups[] = {
+	"gpio140",
+};
+static const char * const mi2s0_ws_groups[] = {
+	"gpio141",
+};
+static const char * const lpass_slimbus_groups[] = {
+	"gpio142", "gpio143", "gpio144", "gpio145",
+};
+static const char * const mi2s1_sck_groups[] = {
+	"gpio142",
+};
+static const char * const mi2s1_data0_groups[] = {
+	"gpio143",
+};
+static const char * const mi2s1_data1_groups[] = {
+	"gpio144",
+};
+static const char * const mi2s1_ws_groups[] = {
+	"gpio145",
+};
+static const char * const cri_trng0_groups[] = {
+	"gpio159",
+};
+static const char * const cri_trng1_groups[] = {
+	"gpio160",
+};
+static const char * const cri_trng_groups[] = {
+	"gpio161",
+};
+static const char * const sp_cmu_groups[] = {
+	"gpio162",
+};
+static const char * const prng_rosc_groups[] = {
+	"gpio163",
+};
+static const char * const qup19_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+	"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+	"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+	"gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+	"gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
+	"gpio141", "gpio142", "gpio143", "gpio144", "gpio145", "gpio146",
+	"gpio147", "gpio148", "gpio149", "gpio150", "gpio151", "gpio152",
+	"gpio153", "gpio154", "gpio155", "gpio156", "gpio157", "gpio158",
+	"gpio159", "gpio160", "gpio161", "gpio162", "gpio163", "gpio164",
+	"gpio165", "gpio166", "gpio167", "gpio168", "gpio169", "gpio170",
+	"gpio171", "gpio172", "gpio173", "gpio174", "gpio175", "gpio176",
+	"gpio177", "gpio178", "gpio179",
+};
+static const char * const qdss_cti_groups[] = {
+	"gpio0", "gpio2", "gpio2", "gpio44", "gpio45", "gpio46", "gpio92",
+	"gpio93",
+};
+static const char * const qup1_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7",
+};
+static const char * const ibi_i3c_groups[] = {
+	"gpio4", "gpio5", "gpio24", "gpio25", "gpio28", "gpio29", "gpio40",
+	"gpio41",
+};
+static const char * const qup_l4_groups[] = {
+	"gpio6", "gpio14", "gpio46", "gpio123",
+};
+static const char * const qup_l5_groups[] = {
+	"gpio7", "gpio15", "gpio47", "gpio124",
+};
+static const char * const qup4_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio11",
+};
+static const char * const qup5_groups[] = {
+	"gpio12", "gpio13", "gpio14", "gpio15",
+};
+static const char * const qup6_groups[] = {
+	"gpio16", "gpio17", "gpio18", "gpio19",
+};
+static const char * const qup7_groups[] = {
+	"gpio20", "gpio21", "gpio22", "gpio23",
+};
+static const char * const qup8_groups[] = {
+	"gpio24", "gpio25", "gpio26", "gpio27",
+};
+static const char * const qup0_groups[] = {
+	"gpio28", "gpio29", "gpio30", "gpio31",
+};
+static const char * const qup12_groups[] = {
+	"gpio32", "gpio33", "gpio34", "gpio35",
+};
+static const char * const qup13_groups[] = {
+	"gpio36", "gpio37", "gpio38", "gpio39",
+};
+static const char * const qup14_groups[] = {
+	"gpio40", "gpio41", "gpio42", "gpio43",
+};
+static const char * const ddr_pxi3_groups[] = {
+	"gpio40", "gpio43",
+};
+static const char * const ddr_pxi1_groups[] = {
+	"gpio41", "gpio42",
+};
+static const char * const vsense_trigger_groups[] = {
+	"gpio42",
+};
+static const char * const qup15_groups[] = {
+	"gpio44", "gpio45", "gpio46", "gpio47",
+};
+static const char * const dbg_out_groups[] = {
+	"gpio44",
+};
+static const char * const qup16_groups[] = {
+	"gpio48", "gpio49", "gpio50", "gpio51",
+};
+static const char * const qup17_groups[] = {
+	"gpio52", "gpio53", "gpio54", "gpio55",
+};
+static const char * const ddr_pxi0_groups[] = {
+	"gpio52", "gpio53",
+};
+static const char * const jitter_bist_groups[] = {
+	"gpio54",
+};
+static const char * const pll_bist_groups[] = {
+	"gpio55",
+};
+static const char * const ddr_pxi2_groups[] = {
+	"gpio55", "gpio56",
+};
+static const char * const qup18_groups[] = {
+	"gpio56", "gpio57", "gpio58", "gpio59",
+};
+static const char * const qup11_groups[] = {
+	"gpio60", "gpio61", "gpio62", "gpio63",
+};
+static const char * const usb2phy_ac_groups[] = {
+	"gpio64", "gpio90",
+};
+static const char * const qup_l6_groups[] = {
+	"gpio64", "gpio77", "gpio92", "gpio93",
+};
+static const char * const usb_phy_groups[] = {
+	"gpio65",
+};
+static const char * const pll_clk_groups[] = {
+	"gpio65",
+};
+static const char * const mdp_vsync_groups[] = {
+	"gpio66", "gpio67", "gpio68", "gpio122", "gpio124",
+};
+static const char * const dp_lcd_groups[] = {
+	"gpio67",
+};
+static const char * const dp_hot_groups[] = {
+	"gpio68",
+};
+static const char * const qspi_cs_groups[] = {
+	"gpio69", "gpio75",
+};
+static const char * const tsif0_clk_groups[] = {
+	"gpio69",
+};
+static const char * const qspi0_groups[] = {
+	"gpio70",
+};
+static const char * const tsif0_en_groups[] = {
+	"gpio70",
+};
+static const char * const mdp_vsync0_groups[] = {
+	"gpio70",
+};
+static const char * const mdp_vsync1_groups[] = {
+	"gpio70",
+};
+static const char * const mdp_vsync2_groups[] = {
+	"gpio70",
+};
+static const char * const mdp_vsync3_groups[] = {
+	"gpio70",
+};
+static const char * const qspi1_groups[] = {
+	"gpio71",
+};
+static const char * const tsif0_data_groups[] = {
+	"gpio71",
+};
+static const char * const sdc4_cmd_groups[] = {
+	"gpio71",
+};
+static const char * const qspi2_groups[] = {
+	"gpio72",
+};
+static const char * const tsif0_sync_groups[] = {
+	"gpio72",
+};
+static const char * const sdc43_groups[] = {
+	"gpio72",
+};
+static const char * const qspi_clk_groups[] = {
+	"gpio73",
+};
+static const char * const tsif1_clk_groups[] = {
+	"gpio73",
+};
+static const char * const sdc4_clk_groups[] = {
+	"gpio73",
+};
+static const char * const qspi3_groups[] = {
+	"gpio74",
+};
+static const char * const tsif1_en_groups[] = {
+	"gpio74",
+};
+static const char * const sdc42_groups[] = {
+	"gpio74",
+};
+
+static const struct msm_function sm8250_functions[] = {
+	FUNCTION(aoss_cti),
+	FUNCTION(atest),
+	FUNCTION(audio_ref),
+	FUNCTION(cam_mclk),
+	FUNCTION(cci_async),
+	FUNCTION(cci_i2c),
+	FUNCTION(cci_timer0),
+	FUNCTION(cci_timer1),
+	FUNCTION(cci_timer2),
+	FUNCTION(cci_timer3),
+	FUNCTION(cci_timer4),
+	FUNCTION(cri_trng),
+	FUNCTION(cri_trng0),
+	FUNCTION(cri_trng1),
+	FUNCTION(dbg_out),
+	FUNCTION(ddr_bist),
+	FUNCTION(ddr_pxi0),
+	FUNCTION(ddr_pxi1),
+	FUNCTION(ddr_pxi2),
+	FUNCTION(ddr_pxi3),
+	FUNCTION(dp_hot),
+	FUNCTION(dp_lcd),
+	FUNCTION(gcc_gp1),
+	FUNCTION(gcc_gp2),
+	FUNCTION(gcc_gp3),
+	FUNCTION(gpio),
+	FUNCTION(ibi_i3c),
+	FUNCTION(jitter_bist),
+	FUNCTION(lpass_slimbus),
+	FUNCTION(mdp_vsync),
+	FUNCTION(mdp_vsync0),
+	FUNCTION(mdp_vsync1),
+	FUNCTION(mdp_vsync2),
+	FUNCTION(mdp_vsync3),
+	FUNCTION(mi2s0_data0),
+	FUNCTION(mi2s0_data1),
+	FUNCTION(mi2s0_sck),
+	FUNCTION(mi2s0_ws),
+	FUNCTION(mi2s1_data0),
+	FUNCTION(mi2s1_data1),
+	FUNCTION(mi2s1_sck),
+	FUNCTION(mi2s1_ws),
+	FUNCTION(mi2s2_data0),
+	FUNCTION(mi2s2_data1),
+	FUNCTION(mi2s2_sck),
+	FUNCTION(mi2s2_ws),
+	FUNCTION(pci_e0),
+	FUNCTION(pci_e1),
+	FUNCTION(pci_e2),
+	FUNCTION(phase_flag),
+	FUNCTION(pll_bist),
+	FUNCTION(pll_bypassnl),
+	FUNCTION(pll_clk),
+	FUNCTION(pll_reset),
+	FUNCTION(pri_mi2s),
+	FUNCTION(prng_rosc),
+	FUNCTION(qdss_cti),
+	FUNCTION(qdss_gpio),
+	FUNCTION(qspi0),
+	FUNCTION(qspi1),
+	FUNCTION(qspi2),
+	FUNCTION(qspi3),
+	FUNCTION(qspi_clk),
+	FUNCTION(qspi_cs),
+	FUNCTION(qup0),
+	FUNCTION(qup1),
+	FUNCTION(qup10),
+	FUNCTION(qup11),
+	FUNCTION(qup12),
+	FUNCTION(qup13),
+	FUNCTION(qup14),
+	FUNCTION(qup15),
+	FUNCTION(qup16),
+	FUNCTION(qup17),
+	FUNCTION(qup18),
+	FUNCTION(qup19),
+	FUNCTION(qup2),
+	FUNCTION(qup3),
+	FUNCTION(qup4),
+	FUNCTION(qup5),
+	FUNCTION(qup6),
+	FUNCTION(qup7),
+	FUNCTION(qup8),
+	FUNCTION(qup9),
+	FUNCTION(qup_l4),
+	FUNCTION(qup_l5),
+	FUNCTION(qup_l6),
+	FUNCTION(sd_write),
+	FUNCTION(sdc40),
+	FUNCTION(sdc41),
+	FUNCTION(sdc42),
+	FUNCTION(sdc43),
+	FUNCTION(sdc4_clk),
+	FUNCTION(sdc4_cmd),
+	FUNCTION(sec_mi2s),
+	FUNCTION(sp_cmu),
+	FUNCTION(tgu_ch0),
+	FUNCTION(tgu_ch1),
+	FUNCTION(tgu_ch2),
+	FUNCTION(tgu_ch3),
+	FUNCTION(tsense_pwm1),
+	FUNCTION(tsense_pwm2),
+	FUNCTION(tsif0_clk),
+	FUNCTION(tsif0_data),
+	FUNCTION(tsif0_en),
+	FUNCTION(tsif0_error),
+	FUNCTION(tsif0_sync),
+	FUNCTION(tsif1_clk),
+	FUNCTION(tsif1_data),
+	FUNCTION(tsif1_en),
+	FUNCTION(tsif1_error),
+	FUNCTION(tsif1_sync),
+	FUNCTION(usb2phy_ac),
+	FUNCTION(usb_phy),
+	FUNCTION(vsense_trigger),
+};
+
+/* Every pin is maintained as a single group, and missing or non-existing pin
+ * would be maintained as dummy group to synchronize pin group index with
+ * pin descriptor registered with pinctrl core.
+ * Clients would not be able to request these dummy pin groups.
+ */
+static const struct msm_pingroup sm8250_groups[] = {
+	[0] = PINGROUP(0, SOUTH, qup19, qdss_cti, _, _, _, _, _, _, _),
+	[1] = PINGROUP(1, SOUTH, qup19, _, _, _, _, _, _, _, _),
+	[2] = PINGROUP(2, SOUTH, qup19, qdss_cti, qdss_cti, _, _, _, _, _, _),
+	[3] = PINGROUP(3, SOUTH, qup19, _, _, _, _, _, _, _, _),
+	[4] = PINGROUP(4, NORTH, qup1, ibi_i3c, _, _, _, _, _, _, _),
+	[5] = PINGROUP(5, NORTH, qup1, ibi_i3c, _, _, _, _, _, _, _),
+	[6] = PINGROUP(6, NORTH, qup1, qup_l4, _, _, _, _, _, _, _),
+	[7] = PINGROUP(7, NORTH, qup1, qup_l5, _, _, _, _, _, _, _),
+	[8] = PINGROUP(8, NORTH, qup4, _, _, _, _, _, _, _, _),
+	[9] = PINGROUP(9, NORTH, qup4, _, _, _, _, _, _, _, _),
+	[10] = PINGROUP(10, NORTH, qup4, _, _, _, _, _, _, _, _),
+	[11] = PINGROUP(11, NORTH, qup4, _, _, _, _, _, _, _, _),
+	[12] = PINGROUP(12, NORTH, qup5, _, _, _, _, _, _, _, _),
+	[13] = PINGROUP(13, NORTH, qup5, _, _, _, _, _, _, _, _),
+	[14] = PINGROUP(14, NORTH, qup5, qup_l4, _, _, _, _, _, _, _),
+	[15] = PINGROUP(15, NORTH, qup5, qup_l5, _, _, _, _, _, _, _),
+	[16] = PINGROUP(16, NORTH, qup6, _, _, _, _, _, _, _, _),
+	[17] = PINGROUP(17, NORTH, qup6, _, _, _, _, _, _, _, _),
+	[18] = PINGROUP(18, NORTH, qup6, _, _, _, _, _, _, _, _),
+	[19] = PINGROUP(19, NORTH, qup6, _, _, _, _, _, _, _, _),
+	[20] = PINGROUP(20, NORTH, qup7, _, _, _, _, _, _, _, _),
+	[21] = PINGROUP(21, NORTH, qup7, _, _, _, _, _, _, _, _),
+	[22] = PINGROUP(22, NORTH, qup7, _, _, _, _, _, _, _, _),
+	[23] = PINGROUP(23, NORTH, qup7, _, _, _, _, _, _, _, _),
+	[24] = PINGROUP(24, SOUTH, qup8, ibi_i3c, atest, _, _, _, _, _, _),
+	[25] = PINGROUP(25, SOUTH, qup8, ibi_i3c, atest, _, _, _, _, _, _),
+	[26] = PINGROUP(26, SOUTH, qup8, atest, _, _, _, _, _, _, _),
+	[27] = PINGROUP(27, SOUTH, qup8, atest, _, _, _, _, _, _, _),
+	[28] = PINGROUP(28, NORTH, qup0, ibi_i3c, _, _, _, _, _, _, _),
+	[29] = PINGROUP(29, NORTH, qup0, ibi_i3c, _, _, _, _, _, _, _),
+	[30] = PINGROUP(30, NORTH, qup0, _, _, _, _, _, _, _, _),
+	[31] = PINGROUP(31, NORTH, qup0, _, _, _, _, _, _, _, _),
+	[32] = PINGROUP(32, SOUTH, qup12, _, atest, _, _, _, _, _, _),
+	[33] = PINGROUP(33, SOUTH, qup12, atest, _, _, _, _, _, _, _),
+	[34] = PINGROUP(34, SOUTH, qup12, atest, _, _, _, _, _, _, _),
+	[35] = PINGROUP(35, SOUTH, qup12, atest, _, _, _, _, _, _, _),
+	[36] = PINGROUP(36, SOUTH, qup13, atest, _, _, _, _, _, _, _),
+	[37] = PINGROUP(37, SOUTH, qup13, atest, _, _, _, _, _, _, _),
+	[38] = PINGROUP(38, SOUTH, qup13, _, _, _, _, _, _, _, _),
+	[39] = PINGROUP(39, SOUTH, qup13, _, _, _, _, _, _, _, _),
+	[40] = PINGROUP(40, SOUTH, qup14, ibi_i3c, _, ddr_pxi3, _, _, _, _, _),
+	[41] = PINGROUP(41, SOUTH, qup14, ibi_i3c, _, ddr_pxi1, _, _, _, _, _),
+	[42] = PINGROUP(42, SOUTH, qup14, vsense_trigger, ddr_pxi1, _, _, _, _, _, _),
+	[43] = PINGROUP(43, SOUTH, qup14, ddr_pxi3, _, _, _, _, _, _, _),
+	[44] = PINGROUP(44, SOUTH, qup15, qdss_cti, dbg_out, _, _, _, _, _, _),
+	[45] = PINGROUP(45, SOUTH, qup15, qdss_cti, phase_flag, _, _, _, _, _, _),
+	[46] = PINGROUP(46, SOUTH, qup15, qup_l4, qdss_cti, phase_flag, _, _, _, _, _),
+	[47] = PINGROUP(47, SOUTH, qup15, qup_l5, phase_flag, _, _, _, _, _, _),
+	[48] = PINGROUP(48, SOUTH, qup16, phase_flag, _, _, _, _, _, _, _),
+	[49] = PINGROUP(49, SOUTH, qup16, phase_flag, _, _, _, _, _, _, _),
+	[50] = PINGROUP(50, SOUTH, qup16, phase_flag, _, _, _, _, _, _, _),
+	[51] = PINGROUP(51, SOUTH, qup16, phase_flag, _, _, _, _, _, _, _),
+	[52] = PINGROUP(52, SOUTH, qup17, ddr_pxi0, _, _, _, _, _, _, _),
+	[53] = PINGROUP(53, SOUTH, qup17, ddr_pxi0, _, _, _, _, _, _, _),
+	[54] = PINGROUP(54, SOUTH, qup17, jitter_bist, _, _, _, _, _, _, _),
+	[55] = PINGROUP(55, SOUTH, qup17, pll_bist, ddr_pxi2, _, _, _, _, _, _),
+	[56] = PINGROUP(56, SOUTH, qup18, ddr_pxi2, _, _, _, _, _, _, _),
+	[57] = PINGROUP(57, SOUTH, qup18, _, _, _, _, _, _, _, _),
+	[58] = PINGROUP(58, SOUTH, qup18, _, _, _, _, _, _, _, _),
+	[59] = PINGROUP(59, SOUTH, qup18, _, _, _, _, _, _, _, _),
+	[60] = PINGROUP(60, SOUTH, qup11, _, _, _, _, _, _, _, _),
+	[61] = PINGROUP(61, SOUTH, qup11, _, _, _, _, _, _, _, _),
+	[62] = PINGROUP(62, SOUTH, qup11, _, _, _, _, _, _, _, _),
+	[63] = PINGROUP(63, SOUTH, qup11, _, _, _, _, _, _, _, _),
+	[64] = PINGROUP(64, SOUTH, usb2phy_ac, qup_l6, _, _, _, _, _, _, _),
+	[65] = PINGROUP(65, SOUTH, usb_phy, pll_clk, _, _, _, _, _, _, _),
+	[66] = PINGROUP(66, NORTH, mdp_vsync, _, _, _, _, _, _, _, _),
+	[67] = PINGROUP(67, NORTH, mdp_vsync, dp_lcd, _, _, _, _, _, _, _),
+	[68] = PINGROUP(68, NORTH, mdp_vsync, dp_hot, _, _, _, _, _, _, _),
+	[69] = PINGROUP(69, SOUTH, qspi_cs, tsif0_clk, phase_flag, _, _, _, _, _, _),
+	[70] = PINGROUP(70, SOUTH, qspi0, tsif0_en, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, phase_flag, _, _),
+	[71] = PINGROUP(71, SOUTH, qspi1, tsif0_data, sdc4_cmd, phase_flag, _, _, _, _, _),
+	[72] = PINGROUP(72, SOUTH, qspi2, tsif0_sync, sdc43, phase_flag, _, _, _, _, _),
+	[73] = PINGROUP(73, SOUTH, qspi_clk, tsif1_clk, sdc4_clk, phase_flag, _, _, _, _, _),
+	[74] = PINGROUP(74, SOUTH, qspi3, tsif1_en, sdc42, phase_flag, _, _, _, _, _),
+	[75] = PINGROUP(75, SOUTH, qspi_cs, tsif1_data, sdc41, _, _, _, _, _, _),
+	[76] = PINGROUP(76, SOUTH, tsif1_sync, sdc40, _, _, _, _, _, _, _),
+	[77] = PINGROUP(77, NORTH, qup_l6, aoss_cti, phase_flag, _, _, _, _, _, _),
+	[78] = PINGROUP(78, NORTH, sd_write, phase_flag, _, _, _, _, _, _, _),
+	[79] = PINGROUP(79, NORTH, pci_e0, phase_flag, _, _, _, _, _, _, _),
+	[80] = PINGROUP(80, NORTH, pci_e0, phase_flag, _, _, _, _, _, _, _),
+	[81] = PINGROUP(81, NORTH, phase_flag, _, _, _, _, _, _, _, _),
+	[82] = PINGROUP(82, NORTH, pci_e1, phase_flag, _, _, _, _, _, _, _),
+	[83] = PINGROUP(83, NORTH, pci_e1, phase_flag, _, _, _, _, _, _, _),
+	[84] = PINGROUP(84, NORTH, phase_flag, _, _, _, _, _, _, _, _),
+	[85] = PINGROUP(85, SOUTH, pci_e2, tgu_ch0, atest, _, _, _, _, _, _),
+	[86] = PINGROUP(86, SOUTH, pci_e2, tgu_ch3, atest, _, _, _, _, _, _),
+	[87] = PINGROUP(87, SOUTH, atest, _, _, _, _, _, _, _, _),
+	[88] = PINGROUP(88, SOUTH, _, atest, _, _, _, _, _, _, _),
+	[89] = PINGROUP(89, SOUTH, _, atest, _, _, _, _, _, _, _),
+	[90] = PINGROUP(90, SOUTH, tsif1_error, usb2phy_ac, tgu_ch1, _, _, _, _, _, _),
+	[91] = PINGROUP(91, SOUTH, tsif0_error, tgu_ch2, _, _, _, _, _, _, _),
+	[92] = PINGROUP(92, NORTH, qup_l6, qdss_cti, _, _, _, _, _, _, _),
+	[93] = PINGROUP(93, NORTH, qup_l6, qdss_cti, _, _, _, _, _, _, _),
+	[94] = PINGROUP(94, NORTH, cam_mclk, ddr_bist, qdss_gpio, _, _, _, _, _, _),
+	[95] = PINGROUP(95, NORTH, cam_mclk, ddr_bist, qdss_gpio, _, _, _, _, _, _),
+	[96] = PINGROUP(96, NORTH, cam_mclk, pll_bypassnl, qdss_gpio, _, _, _, _, _, _),
+	[97] = PINGROUP(97, NORTH, cam_mclk, pll_reset, qdss_gpio, _, _, _, _, _, _),
+	[98] = PINGROUP(98, NORTH, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+	[99] = PINGROUP(99, NORTH, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+	[100] = PINGROUP(100, NORTH, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+	[101] = PINGROUP(101, NORTH, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+	[102] = PINGROUP(102, NORTH, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+	[103] = PINGROUP(103, NORTH, cci_i2c, phase_flag, _, qdss_gpio, _, _, _, _, _),
+	[104] = PINGROUP(104, NORTH, cci_i2c, phase_flag, _, qdss_gpio, _, _, _, _, _),
+	[105] = PINGROUP(105, NORTH, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+	[106] = PINGROUP(106, NORTH, cci_i2c, gcc_gp1, qdss_gpio, _, _, _, _, _, _),
+	[107] = PINGROUP(107, NORTH, cci_i2c, gcc_gp2, qdss_gpio, _, _, _, _, _, _),
+	[108] = PINGROUP(108, NORTH, cci_i2c, gcc_gp3, qdss_gpio, _, _, _, _, _, _),
+	[109] = PINGROUP(109, NORTH, cci_timer0, qdss_gpio, _, _, _, _, _, _, _),
+	[110] = PINGROUP(110, NORTH, cci_timer1, qdss_gpio, _, _, _, _, _, _, _),
+	[111] = PINGROUP(111, NORTH, cci_timer2, qdss_gpio, _, _, _, _, _, _, _),
+	[112] = PINGROUP(112, NORTH, cci_timer3, cci_async, _, _, _, _, _, _, _),
+	[113] = PINGROUP(113, NORTH, cci_timer4, cci_async, _, _, _, _, _, _, _),
+	[114] = PINGROUP(114, NORTH, cci_async, _, _, _, _, _, _, _, _),
+	[115] = PINGROUP(115, NORTH, qup2, phase_flag, _, _, _, _, _, _, _),
+	[116] = PINGROUP(116, NORTH, qup2, phase_flag, _, _, _, _, _, _, _),
+	[117] = PINGROUP(117, NORTH, qup2, phase_flag, _, _, _, _, _, _, _),
+	[118] = PINGROUP(118, NORTH, qup2, phase_flag, _, _, _, _, _, _, _),
+	[119] = PINGROUP(119, NORTH, qup3, phase_flag, _, _, _, _, _, _, _),
+	[120] = PINGROUP(120, NORTH, qup3, phase_flag, _, _, _, _, _, _, _),
+	[121] = PINGROUP(121, NORTH, qup3, _, _, _, _, _, _, _, _),
+	[122] = PINGROUP(122, NORTH, qup3, mdp_vsync, phase_flag, _, _, _, _, _, _),
+	[123] = PINGROUP(123, NORTH, qup_l4, tsense_pwm1, tsense_pwm2, _, _, _, _, _, _),
+	[124] = PINGROUP(124, NORTH, qup_l5, mdp_vsync, phase_flag, _, _, _, _, _, _),
+	[125] = PINGROUP(125, SOUTH, qup9, phase_flag, _, _, _, _, _, _, _),
+	[126] = PINGROUP(126, SOUTH, qup9, _, _, _, _, _, _, _, _),
+	[127] = PINGROUP(127, SOUTH, qup9, _, _, _, _, _, _, _, _),
+	[128] = PINGROUP(128, SOUTH, qup9, _, _, _, _, _, _, _, _),
+	[129] = PINGROUP(129, SOUTH, qup10, _, _, _, _, _, _, _, _),
+	[130] = PINGROUP(130, SOUTH, qup10, _, _, _, _, _, _, _, _),
+	[131] = PINGROUP(131, SOUTH, qup10, _, _, _, _, _, _, _, _),
+	[132] = PINGROUP(132, SOUTH, qup10, _, _, _, _, _, _, _, _),
+	[133] = PINGROUP(133, WEST, mi2s2_sck, _, _, _, _, _, _, _, _),
+	[134] = PINGROUP(134, WEST, mi2s2_data0, _, _, _, _, _, _, _, _),
+	[135] = PINGROUP(135, WEST, mi2s2_ws, _, _, _, _, _, _, _, _),
+	[136] = PINGROUP(136, WEST, pri_mi2s, gcc_gp1, _, _, _, _, _, _, _),
+	[137] = PINGROUP(137, WEST, sec_mi2s, audio_ref, mi2s2_data1, gcc_gp2, _, _, _, _, _),
+	[138] = PINGROUP(138, WEST, mi2s0_sck, gcc_gp3, _, _, _, _, _, _, _),
+	[139] = PINGROUP(139, WEST, mi2s0_data0, _, _, _, _, _, _, _, _),
+	[140] = PINGROUP(140, WEST, mi2s0_data1, _, _, _, _, _, _, _, _),
+	[141] = PINGROUP(141, WEST, mi2s0_ws, _, _, _, _, _, _, _, _),
+	[142] = PINGROUP(142, WEST, lpass_slimbus, mi2s1_sck, _, _, _, _, _, _, _),
+	[143] = PINGROUP(143, WEST, lpass_slimbus, mi2s1_data0, ddr_bist, _, _, _, _, _, _),
+	[144] = PINGROUP(144, WEST, lpass_slimbus, mi2s1_data1, ddr_bist, _, _, _, _, _, _),
+	[145] = PINGROUP(145, WEST, lpass_slimbus, mi2s1_ws, _, _, _, _, _, _, _),
+	[146] = PINGROUP(146, WEST, _, _, _, _, _, _, _, _, _),
+	[147] = PINGROUP(147, WEST, _, _, _, _, _, _, _, _, _),
+	[148] = PINGROUP(148, WEST, _, _, _, _, _, _, _, _, _),
+	[149] = PINGROUP(149, WEST, _, _, _, _, _, _, _, _, _),
+	[150] = PINGROUP(150, WEST, _, _, _, _, _, _, _, _, _),
+	[151] = PINGROUP(151, WEST, _, _, _, _, _, _, _, _, _),
+	[152] = PINGROUP(152, WEST, _, _, _, _, _, _, _, _, _),
+	[153] = PINGROUP(153, WEST, _, _, _, _, _, _, _, _, _),
+	[154] = PINGROUP(154, WEST, _, _, _, _, _, _, _, _, _),
+	[155] = PINGROUP(155, WEST, _, _, _, _, _, _, _, _, _),
+	[156] = PINGROUP(156, WEST, _, _, _, _, _, _, _, _, _),
+	[157] = PINGROUP(157, WEST, _, _, _, _, _, _, _, _, _),
+	[158] = PINGROUP(158, WEST, _, _, _, _, _, _, _, _, _),
+	[159] = PINGROUP(159, WEST, cri_trng0, _, _, _, _, _, _, _, _),
+	[160] = PINGROUP(160, WEST, cri_trng1, qdss_gpio, _, _, _, _, _, _, _),
+	[161] = PINGROUP(161, WEST, cri_trng, qdss_gpio, _, _, _, _, _, _, _),
+	[162] = PINGROUP(162, WEST, sp_cmu, qdss_gpio, _, _, _, _, _, _, _),
+	[163] = PINGROUP(163, WEST, prng_rosc, qdss_gpio, _, _, _, _, _, _, _),
+	[164] = PINGROUP(164, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[165] = PINGROUP(165, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[166] = PINGROUP(166, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[167] = PINGROUP(167, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[168] = PINGROUP(168, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[169] = PINGROUP(169, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[170] = PINGROUP(170, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[171] = PINGROUP(171, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[172] = PINGROUP(172, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[173] = PINGROUP(173, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[174] = PINGROUP(174, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[175] = PINGROUP(175, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[176] = PINGROUP(176, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[177] = PINGROUP(177, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+	[178] = PINGROUP(178, WEST, _, _, _, _, _, _, _, _, _),
+	[179] = PINGROUP(179, WEST, _, _, _, _, _, _, _, _, _),
+	[180] = UFS_RESET(ufs_reset, 0xb8000),
+	[181] = SDC_PINGROUP(sdc2_clk, 0x7000, 14, 6),
+	[182] = SDC_PINGROUP(sdc2_cmd, 0xb7000, 11, 3),
+	[183] = SDC_PINGROUP(sdc2_data, 0xb7000, 9, 0),
+};
+
+static const struct msm_pinctrl_soc_data sm8250_pinctrl = {
+	.pins = sm8250_pins,
+	.npins = ARRAY_SIZE(sm8250_pins),
+	.functions = sm8250_functions,
+	.nfunctions = ARRAY_SIZE(sm8250_functions),
+	.groups = sm8250_groups,
+	.ngroups = ARRAY_SIZE(sm8250_groups),
+	.ngpios = 181,
+	.tiles = sm8250_tiles,
+	.ntiles = ARRAY_SIZE(sm8250_tiles),
+};
+
+static int sm8250_pinctrl_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &sm8250_pinctrl);
+}
+
+static const struct of_device_id sm8250_pinctrl_of_match[] = {
+	{ .compatible = "qcom,sm8250-pinctrl", },
+	{ },
+};
+
+static struct platform_driver sm8250_pinctrl_driver = {
+	.driver = {
+		.name = "sm8250-pinctrl",
+		.of_match_table = sm8250_pinctrl_of_match,
+	},
+	.probe = sm8250_pinctrl_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init sm8250_pinctrl_init(void)
+{
+	return platform_driver_register(&sm8250_pinctrl_driver);
+}
+arch_initcall(sm8250_pinctrl_init);
+
+static void __exit sm8250_pinctrl_exit(void)
+{
+	platform_driver_unregister(&sm8250_pinctrl_driver);
+}
+module_exit(sm8250_pinctrl_exit);
+
+MODULE_DESCRIPTION("QTI sm8250 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, sm8250_pinctrl_of_match);
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index 0599f5127b01..84501c785473 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -40,6 +40,8 @@ struct exynos_irq_chip {
 	u32 eint_pend;
 	u32 eint_wake_mask_value;
 	u32 eint_wake_mask_reg;
+	void (*set_eint_wakeup_mask)(struct samsung_pinctrl_drv_data *drvdata,
+				     struct exynos_irq_chip *irq_chip);
 };
 
 static inline struct exynos_irq_chip *to_exynos_irq_chip(struct irq_chip *chip)
@@ -265,6 +267,7 @@ struct exynos_eint_gpio_save {
 	u32 eint_con;
 	u32 eint_fltcon0;
 	u32 eint_fltcon1;
+	u32 eint_mask;
 };
 
 /*
@@ -342,6 +345,47 @@ static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on)
 	return 0;
 }
 
+static void
+exynos_pinctrl_set_eint_wakeup_mask(struct samsung_pinctrl_drv_data *drvdata,
+				    struct exynos_irq_chip *irq_chip)
+{
+	struct regmap *pmu_regs;
+
+	if (!drvdata->retention_ctrl || !drvdata->retention_ctrl->priv) {
+		dev_warn(drvdata->dev,
+			 "No retention data configured bank with external wakeup interrupt. Wake-up mask will not be set.\n");
+		return;
+	}
+
+	pmu_regs = drvdata->retention_ctrl->priv;
+	dev_info(drvdata->dev,
+		 "Setting external wakeup interrupt mask: 0x%x\n",
+		 irq_chip->eint_wake_mask_value);
+
+	regmap_write(pmu_regs, irq_chip->eint_wake_mask_reg,
+		     irq_chip->eint_wake_mask_value);
+}
+
+static void
+s5pv210_pinctrl_set_eint_wakeup_mask(struct samsung_pinctrl_drv_data *drvdata,
+				    struct exynos_irq_chip *irq_chip)
+
+{
+	void __iomem *clk_base;
+
+	if (!drvdata->retention_ctrl || !drvdata->retention_ctrl->priv) {
+		dev_warn(drvdata->dev,
+			 "No retention data configured bank with external wakeup interrupt. Wake-up mask will not be set.\n");
+		return;
+	}
+
+
+	clk_base = (void __iomem *) drvdata->retention_ctrl->priv;
+
+	__raw_writel(irq_chip->eint_wake_mask_value,
+		     clk_base + irq_chip->eint_wake_mask_reg);
+}
+
 /*
  * irq_chip for wakeup interrupts
  */
@@ -360,8 +404,9 @@ static const struct exynos_irq_chip s5pv210_wkup_irq_chip __initconst = {
 	.eint_mask = EXYNOS_WKUP_EMASK_OFFSET,
 	.eint_pend = EXYNOS_WKUP_EPEND_OFFSET,
 	.eint_wake_mask_value = EXYNOS_EINT_WAKEUP_MASK_DISABLED,
-	/* Only difference with exynos4210_wkup_irq_chip: */
+	/* Only differences with exynos4210_wkup_irq_chip: */
 	.eint_wake_mask_reg = S5PV210_EINT_WAKEUP_MASK,
+	.set_eint_wakeup_mask = s5pv210_pinctrl_set_eint_wakeup_mask,
 };
 
 static const struct exynos_irq_chip exynos4210_wkup_irq_chip __initconst = {
@@ -380,6 +425,7 @@ static const struct exynos_irq_chip exynos4210_wkup_irq_chip __initconst = {
 	.eint_pend = EXYNOS_WKUP_EPEND_OFFSET,
 	.eint_wake_mask_value = EXYNOS_EINT_WAKEUP_MASK_DISABLED,
 	.eint_wake_mask_reg = EXYNOS_EINT_WAKEUP_MASK,
+	.set_eint_wakeup_mask = exynos_pinctrl_set_eint_wakeup_mask,
 };
 
 static const struct exynos_irq_chip exynos7_wkup_irq_chip __initconst = {
@@ -398,6 +444,7 @@ static const struct exynos_irq_chip exynos7_wkup_irq_chip __initconst = {
 	.eint_pend = EXYNOS7_WKUP_EPEND_OFFSET,
 	.eint_wake_mask_value = EXYNOS_EINT_WAKEUP_MASK_DISABLED,
 	.eint_wake_mask_reg = EXYNOS5433_EINT_WAKEUP_MASK,
+	.set_eint_wakeup_mask = exynos_pinctrl_set_eint_wakeup_mask,
 };
 
 /* list of external wakeup controllers supported */
@@ -574,27 +621,6 @@ int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 	return 0;
 }
 
-static void
-exynos_pinctrl_set_eint_wakeup_mask(struct samsung_pinctrl_drv_data *drvdata,
-				    struct exynos_irq_chip *irq_chip)
-{
-	struct regmap *pmu_regs;
-
-	if (!drvdata->retention_ctrl || !drvdata->retention_ctrl->priv) {
-		dev_warn(drvdata->dev,
-			 "No retention data configured bank with external wakeup interrupt. Wake-up mask will not be set.\n");
-		return;
-	}
-
-	pmu_regs = drvdata->retention_ctrl->priv;
-	dev_info(drvdata->dev,
-		 "Setting external wakeup interrupt mask: 0x%x\n",
-		 irq_chip->eint_wake_mask_value);
-
-	regmap_write(pmu_regs, irq_chip->eint_wake_mask_reg,
-		     irq_chip->eint_wake_mask_value);
-}
-
 static void exynos_pinctrl_suspend_bank(
 				struct samsung_pinctrl_drv_data *drvdata,
 				struct samsung_pin_bank *bank)
@@ -608,10 +634,13 @@ static void exynos_pinctrl_suspend_bank(
 						+ 2 * bank->eint_offset);
 	save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
 						+ 2 * bank->eint_offset + 4);
+	save->eint_mask = readl(regs + bank->irq_chip->eint_mask
+						+ bank->eint_offset);
 
 	pr_debug("%s: save     con %#010x\n", bank->name, save->eint_con);
 	pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0);
 	pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1);
+	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
 }
 
 void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
@@ -626,8 +655,8 @@ void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
 		else if (bank->eint_type == EINT_TYPE_WKUP) {
 			if (!irq_chip) {
 				irq_chip = bank->irq_chip;
-				exynos_pinctrl_set_eint_wakeup_mask(drvdata,
-								    irq_chip);
+				irq_chip->set_eint_wakeup_mask(drvdata,
+							       irq_chip);
 			} else if (bank->irq_chip != irq_chip) {
 				dev_warn(drvdata->dev,
 					 "More than one external wakeup interrupt chip configured (bank: %s). This is not supported by hardware nor by driver.\n",
@@ -653,6 +682,9 @@ static void exynos_pinctrl_resume_bank(
 	pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name,
 			readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
 			+ 2 * bank->eint_offset + 4), save->eint_fltcon1);
+	pr_debug("%s:    mask %#010x => %#010x\n", bank->name,
+			readl(regs + bank->irq_chip->eint_mask
+			+ bank->eint_offset), save->eint_mask);
 
 	writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET
 						+ bank->eint_offset);
@@ -660,6 +692,8 @@ static void exynos_pinctrl_resume_bank(
 						+ 2 * bank->eint_offset);
 	writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET
 						+ 2 * bank->eint_offset + 4);
+	writel(save->eint_mask, regs + bank->irq_chip->eint_mask
+						+ bank->eint_offset);
 }
 
 void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7269.c b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
index d20974a55d93..e2916aaa8304 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7269.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
@@ -1963,8 +1963,9 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	/* "name" addr register_size Field_Width */
 
-	/* where Field_Width is 1 for single mode registers or 4 for upto 16
-	   mode registers and modes are described in assending order [0..16] */
+	/* where Field_Width is 1 for single mode registers or 4 for up to 16
+	 * mode registers and modes are described in assending order [0..15]
+	 */
 
 	{ PINMUX_CFG_REG("PAIOR0", 0xfffe3812, 16, 1, GROUP(
 		0, 0, 0, 0, 0, 0, 0, 0,
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
index 8a08c4afc6a8..9e5b61449999 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
@@ -103,8 +103,11 @@ static int sun8i_a23_r_pinctrl_probe(struct platform_device *pdev)
 
 	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(rstc)) {
-		dev_err(&pdev->dev, "Reset controller missing\n");
-		return PTR_ERR(rstc);
+		ret = PTR_ERR(rstc);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+		dev_err(&pdev->dev, "Reset controller missing err=%d\n", ret);
+		return ret;
 	}
 
 	ret = reset_control_deassert(rstc);
diff --git a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
index 6f7b3767f453..43922ab81666 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
@@ -123,7 +123,7 @@ static int tegra_xusb_padctl_get_group_pins(struct pinctrl_dev *pinctrl,
 					    unsigned *num_pins)
 {
 	/*
-	 * For the tegra-xusb pad controller groups are synonomous
+	 * For the tegra-xusb pad controller groups are synonymous
 	 * with lanes/pins and there is always one lane/pin per group.
 	 */
 	*pins = &pinctrl->desc->pins[group].number;
diff --git a/drivers/pinctrl/zte/pinctrl-zx.c b/drivers/pinctrl/zte/pinctrl-zx.c
index 786bf89487d6..80d00ab8c110 100644
--- a/drivers/pinctrl/zte/pinctrl-zx.c
+++ b/drivers/pinctrl/zte/pinctrl-zx.c
@@ -94,7 +94,7 @@ static int zx_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
 	if (data->aon_pin) {
 		/*
 		 * It's an AON pin, whose mux register offset and bit position
-		 * can be caluculated from pin number.  Each register covers 16
+		 * can be calculated from pin number.  Each register covers 16
 		 * pins, and each pin occupies 2 bits.
 		 */
 		u16 aoffset = pindesc->number / 16 * 4;
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 03ea5129ed0c..a484ab2c91ff 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -217,6 +217,7 @@ config CROS_EC_SYSFS
 config CROS_EC_TYPEC
 	tristate "ChromeOS EC Type-C Connector Control"
 	depends on MFD_CROS_EC_DEV && TYPEC
+	depends on CROS_USBPD_NOTIFY
 	default MFD_CROS_EC_DEV
 	help
 	  If you say Y here, you get support for accessing Type C connector
diff --git a/drivers/platform/chrome/chromeos_pstore.c b/drivers/platform/chrome/chromeos_pstore.c
index d13770785fb5..82dea8cb5da1 100644
--- a/drivers/platform/chrome/chromeos_pstore.c
+++ b/drivers/platform/chrome/chromeos_pstore.c
@@ -57,6 +57,7 @@ static struct ramoops_platform_data chromeos_ramoops_data = {
 	.record_size	= 0x40000,
 	.console_size	= 0x20000,
 	.ftrace_size	= 0x20000,
+	.pmsg_size	= 0x20000,
 	.dump_oops	= 1,
 };
 
diff --git a/drivers/platform/chrome/cros_ec_ishtp.c b/drivers/platform/chrome/cros_ec_ishtp.c
index 93a71e93a2f1..ed794a7ddba9 100644
--- a/drivers/platform/chrome/cros_ec_ishtp.c
+++ b/drivers/platform/chrome/cros_ec_ishtp.c
@@ -48,7 +48,8 @@ static const guid_t cros_ish_guid =
 struct header {
 	u8 channel;
 	u8 status;
-	u8 reserved[2];
+	u8 token;
+	u8 reserved;
 } __packed;
 
 struct cros_ish_out_msg {
@@ -90,6 +91,7 @@ static DECLARE_RWSEM(init_lock);
  * data exceeds this value, we log an error.
  * @size: Actual size of data received from firmware.
  * @error: 0 for success, negative error code for a failure in process_recv().
+ * @token: Expected token for response that we are waiting on.
  * @received: Set to true on receiving a valid firmware	response to host command
  * @wait_queue: Wait queue for host to wait for firmware response.
  */
@@ -98,6 +100,7 @@ struct response_info {
 	size_t max_size;
 	size_t size;
 	int error;
+	u8 token;
 	bool received;
 	wait_queue_head_t wait_queue;
 };
@@ -162,6 +165,7 @@ static int ish_send(struct ishtp_cl_data *client_data,
 		    u8 *out_msg, size_t out_size,
 		    u8 *in_msg, size_t in_size)
 {
+	static u8 next_token;
 	int rv;
 	struct header *out_hdr = (struct header *)out_msg;
 	struct ishtp_cl *cros_ish_cl = client_data->cros_ish_cl;
@@ -174,8 +178,11 @@ static int ish_send(struct ishtp_cl_data *client_data,
 	client_data->response.data = in_msg;
 	client_data->response.max_size = in_size;
 	client_data->response.error = 0;
+	client_data->response.token = next_token++;
 	client_data->response.received = false;
 
+	out_hdr->token = client_data->response.token;
+
 	rv = ishtp_cl_send(cros_ish_cl, out_msg, out_size);
 	if (rv) {
 		dev_err(cl_data_to_dev(client_data),
@@ -249,17 +256,23 @@ static void process_recv(struct ishtp_cl *cros_ish_cl,
 
 	switch (in_msg->hdr.channel) {
 	case CROS_EC_COMMAND:
-		/* Sanity check */
-		if (!client_data->response.data) {
+		if (client_data->response.received) {
 			dev_err(dev,
-				"Receiving buffer is null. Should be allocated by calling function\n");
-			client_data->response.error = -EINVAL;
-			goto error_wake_up;
+				"Previous firmware message not yet processed\n");
+			goto end_error;
 		}
 
-		if (client_data->response.received) {
+		if (client_data->response.token != in_msg->hdr.token) {
+			dev_err_ratelimited(dev,
+					    "Dropping old response token %d\n",
+					    in_msg->hdr.token);
+			goto end_error;
+		}
+
+		/* Sanity check */
+		if (!client_data->response.data) {
 			dev_err(dev,
-				"Previous firmware message not yet processed\n");
+				"Receiving buffer is null. Should be allocated by calling function\n");
 			client_data->response.error = -EINVAL;
 			goto error_wake_up;
 		}
@@ -289,21 +302,28 @@ static void process_recv(struct ishtp_cl *cros_ish_cl,
 		memcpy(client_data->response.data,
 		       rb_in_proc->buffer.data, data_len);
 
+error_wake_up:
+		/* Free the buffer since we copied data or didn't need it */
+		ishtp_cl_io_rb_recycle(rb_in_proc);
+		rb_in_proc = NULL;
+
 		/* Set flag before waking up the caller */
 		client_data->response.received = true;
-error_wake_up:
+
 		/* Wake the calling thread */
 		wake_up_interruptible(&client_data->response.wait_queue);
 
 		break;
 
 	case CROS_MKBP_EVENT:
+		/* Free the buffer. This is just an event without data */
+		ishtp_cl_io_rb_recycle(rb_in_proc);
+		rb_in_proc = NULL;
 		/*
 		 * Set timestamp from beginning of function since we actually
 		 * got an incoming MKBP event
 		 */
 		client_data->ec_dev->last_event_time = timestamp;
-		/* The event system doesn't send any data in buffer */
 		schedule_work(&client_data->work_ec_evt);
 
 		break;
@@ -313,8 +333,9 @@ static void process_recv(struct ishtp_cl *cros_ish_cl,
 	}
 
 end_error:
-	/* Free the buffer */
-	ishtp_cl_io_rb_recycle(rb_in_proc);
+	/* Free the buffer if we already haven't */
+	if (rb_in_proc)
+		ishtp_cl_io_rb_recycle(rb_in_proc);
 
 	up_read(&init_lock);
 }
diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
index 874269c07073..eda57db26f8d 100644
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -11,11 +11,22 @@
 #include <linux/of.h>
 #include <linux/platform_data/cros_ec_commands.h>
 #include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_usbpd_notify.h>
 #include <linux/platform_device.h>
 #include <linux/usb/typec.h>
 
 #define DRV_NAME "cros-ec-typec"
 
+/* Per port data. */
+struct cros_typec_port {
+	struct typec_port *port;
+	/* Initial capabilities for the port. */
+	struct typec_capability caps;
+	struct typec_partner *partner;
+	/* Port partner PD identity info. */
+	struct usb_pd_identity p_identity;
+};
+
 /* Platform-specific data for the Chrome OS EC Type C controller. */
 struct cros_typec_data {
 	struct device *dev;
@@ -23,9 +34,8 @@ struct cros_typec_data {
 	int num_ports;
 	unsigned int cmd_ver;
 	/* Array of ports, indexed by port number. */
-	struct typec_port *ports[EC_USB_PD_MAX_PORTS];
-	/* Initial capabilities for each port. */
-	struct typec_capability *caps[EC_USB_PD_MAX_PORTS];
+	struct cros_typec_port *ports[EC_USB_PD_MAX_PORTS];
+	struct notifier_block nb;
 };
 
 static int cros_typec_parse_port_props(struct typec_capability *cap,
@@ -74,14 +84,25 @@ static int cros_typec_parse_port_props(struct typec_capability *cap,
 	return 0;
 }
 
+static void cros_unregister_ports(struct cros_typec_data *typec)
+{
+	int i;
+
+	for (i = 0; i < typec->num_ports; i++) {
+		if (!typec->ports[i])
+			continue;
+		typec_unregister_port(typec->ports[i]->port);
+	}
+}
+
 static int cros_typec_init_ports(struct cros_typec_data *typec)
 {
 	struct device *dev = typec->dev;
 	struct typec_capability *cap;
 	struct fwnode_handle *fwnode;
+	struct cros_typec_port *cros_port;
 	const char *port_prop;
 	int ret;
-	int i;
 	int nports;
 	u32 port_num = 0;
 
@@ -113,22 +134,23 @@ static int cros_typec_init_ports(struct cros_typec_data *typec)
 
 		dev_dbg(dev, "Registering port %d\n", port_num);
 
-		cap = devm_kzalloc(dev, sizeof(*cap), GFP_KERNEL);
-		if (!cap) {
+		cros_port = devm_kzalloc(dev, sizeof(*cros_port), GFP_KERNEL);
+		if (!cros_port) {
 			ret = -ENOMEM;
 			goto unregister_ports;
 		}
 
-		typec->caps[port_num] = cap;
+		typec->ports[port_num] = cros_port;
+		cap = &cros_port->caps;
 
 		ret = cros_typec_parse_port_props(cap, fwnode, dev);
 		if (ret < 0)
 			goto unregister_ports;
 
-		typec->ports[port_num] = typec_register_port(dev, cap);
-		if (IS_ERR(typec->ports[port_num])) {
+		cros_port->port = typec_register_port(dev, cap);
+		if (IS_ERR(cros_port->port)) {
 			dev_err(dev, "Failed to register port %d\n", port_num);
-			ret = PTR_ERR(typec->ports[port_num]);
+			ret = PTR_ERR(cros_port->port);
 			goto unregister_ports;
 		}
 	}
@@ -136,8 +158,7 @@ static int cros_typec_init_ports(struct cros_typec_data *typec)
 	return 0;
 
 unregister_ports:
-	for (i = 0; i < typec->num_ports; i++)
-		typec_unregister_port(typec->ports[i]);
+	cros_unregister_ports(typec);
 	return ret;
 }
 
@@ -172,10 +193,34 @@ static int cros_typec_ec_command(struct cros_typec_data *typec,
 	return ret;
 }
 
+static int cros_typec_add_partner(struct cros_typec_data *typec, int port_num,
+				  bool pd_en)
+{
+	struct cros_typec_port *port = typec->ports[port_num];
+	struct typec_partner_desc p_desc = {
+		.usb_pd = pd_en,
+	};
+	int ret = 0;
+
+	/*
+	 * Fill an initial PD identity, which will then be updated with info
+	 * from the EC.
+	 */
+	p_desc.identity = &port->p_identity;
+
+	port->partner = typec_register_partner(port->port, &p_desc);
+	if (IS_ERR(port->partner)) {
+		ret = PTR_ERR(port->partner);
+		port->partner = NULL;
+	}
+
+	return ret;
+}
+
 static void cros_typec_set_port_params_v0(struct cros_typec_data *typec,
 		int port_num, struct ec_response_usb_pd_control *resp)
 {
-	struct typec_port *port = typec->ports[port_num];
+	struct typec_port *port = typec->ports[port_num]->port;
 	enum typec_orientation polarity;
 
 	if (!resp->enabled)
@@ -192,8 +237,10 @@ static void cros_typec_set_port_params_v0(struct cros_typec_data *typec,
 static void cros_typec_set_port_params_v1(struct cros_typec_data *typec,
 		int port_num, struct ec_response_usb_pd_control_v1 *resp)
 {
-	struct typec_port *port = typec->ports[port_num];
+	struct typec_port *port = typec->ports[port_num]->port;
 	enum typec_orientation polarity;
+	bool pd_en;
+	int ret;
 
 	if (!(resp->enabled & PD_CTRL_RESP_ENABLED_CONNECTED))
 		polarity = TYPEC_ORIENTATION_NONE;
@@ -208,6 +255,25 @@ static void cros_typec_set_port_params_v1(struct cros_typec_data *typec,
 			TYPEC_SOURCE : TYPEC_SINK);
 	typec_set_vconn_role(port, resp->role & PD_CTRL_RESP_ROLE_VCONN ?
 			TYPEC_SOURCE : TYPEC_SINK);
+
+	/* Register/remove partners when a connect/disconnect occurs. */
+	if (resp->enabled & PD_CTRL_RESP_ENABLED_CONNECTED) {
+		if (typec->ports[port_num]->partner)
+			return;
+
+		pd_en = resp->enabled & PD_CTRL_RESP_ENABLED_PD_CAPABLE;
+		ret = cros_typec_add_partner(typec, port_num, pd_en);
+		if (!ret)
+			dev_warn(typec->dev,
+				 "Failed to register partner on port: %d\n",
+				 port_num);
+	} else {
+		if (!typec->ports[port_num]->partner)
+			return;
+
+		typec_unregister_partner(typec->ports[port_num]->partner);
+		typec->ports[port_num]->partner = NULL;
+	}
 }
 
 static int cros_typec_port_update(struct cros_typec_data *typec, int port_num)
@@ -272,6 +338,22 @@ static int cros_typec_get_cmd_version(struct cros_typec_data *typec)
 	return 0;
 }
 
+static int cros_ec_typec_event(struct notifier_block *nb,
+			       unsigned long host_event, void *_notify)
+{
+	struct cros_typec_data *typec = container_of(nb, struct cros_typec_data,
+						     nb);
+	int ret, i;
+
+	for (i = 0; i < typec->num_ports; i++) {
+		ret = cros_typec_port_update(typec, i);
+		if (ret < 0)
+			dev_warn(typec->dev, "Update failed for port: %d\n", i);
+	}
+
+	return NOTIFY_OK;
+}
+
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id cros_typec_acpi_id[] = {
 	{ "GOOG0014", 0 },
@@ -332,12 +414,15 @@ static int cros_typec_probe(struct platform_device *pdev)
 			goto unregister_ports;
 	}
 
+	typec->nb.notifier_call = cros_ec_typec_event;
+	ret = cros_usbpd_register_notify(&typec->nb);
+	if (ret < 0)
+		goto unregister_ports;
+
 	return 0;
 
 unregister_ports:
-	for (i = 0; i < typec->num_ports; i++)
-		if (typec->ports[i])
-			typec_unregister_port(typec->ports[i]);
+	cros_unregister_ports(typec);
 	return ret;
 }
 
diff --git a/drivers/platform/chrome/wilco_ec/debugfs.c b/drivers/platform/chrome/wilco_ec/debugfs.c
index df5a5f6c3ec6..a812788a0bdc 100644
--- a/drivers/platform/chrome/wilco_ec/debugfs.c
+++ b/drivers/platform/chrome/wilco_ec/debugfs.c
@@ -208,7 +208,12 @@ static int send_ec_cmd(struct wilco_ec_device *ec, u8 sub_cmd, u8 *out_val)
  */
 static int h1_gpio_get(void *arg, u64 *val)
 {
-	return send_ec_cmd(arg, SUB_CMD_H1_GPIO, (u8 *)val);
+	int ret;
+
+	ret = send_ec_cmd(arg, SUB_CMD_H1_GPIO, (u8 *)val);
+	if (ret == 0)
+		*val &= 0xFF;
+	return ret;
 }
 
 DEFINE_DEBUGFS_ATTRIBUTE(fops_h1_gpio, h1_gpio_get, NULL, "0x%02llx\n");
diff --git a/drivers/platform/mellanox/mlxreg-hotplug.c b/drivers/platform/mellanox/mlxreg-hotplug.c
index 77be37a1fbcf..ed48917af162 100644
--- a/drivers/platform/mellanox/mlxreg-hotplug.c
+++ b/drivers/platform/mellanox/mlxreg-hotplug.c
@@ -101,6 +101,7 @@ static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
 					struct mlxreg_core_data *data)
 {
 	struct mlxreg_core_hotplug_platform_data *pdata;
+	struct i2c_client *client;
 
 	/* Notify user by sending hwmon uevent. */
 	kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE);
@@ -121,18 +122,20 @@ static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
 		return -EFAULT;
 	}
 
-	data->hpdev.client = i2c_new_device(data->hpdev.adapter,
-					    data->hpdev.brdinfo);
-	if (!data->hpdev.client) {
+	client = i2c_new_client_device(data->hpdev.adapter,
+				       data->hpdev.brdinfo);
+	if (IS_ERR(client)) {
 		dev_err(priv->dev, "Failed to create client %s at bus %d at addr 0x%02x\n",
 			data->hpdev.brdinfo->type, data->hpdev.nr +
 			pdata->shift_nr, data->hpdev.brdinfo->addr);
 
 		i2c_put_adapter(data->hpdev.adapter);
 		data->hpdev.adapter = NULL;
-		return -EFAULT;
+		return PTR_ERR(client);
 	}
 
+	data->hpdev.client = client;
+
 	return 0;
 }
 
diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 5e77b0dc5fd6..8ac149173c64 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -24,4 +24,10 @@ config CPU_HWMON
 	help
 	  Loongson-3A/3B CPU Hwmon (temperature sensor) driver.
 
+config RS780E_ACPI
+	bool "Loongson RS780E ACPI Controller"
+	depends on MACH_LOONGSON64 || COMPILE_TEST
+	help
+	  Loongson RS780E PCH ACPI Controller driver.
+
 endif # MIPS_PLATFORM_DEVICES
diff --git a/drivers/platform/mips/Makefile b/drivers/platform/mips/Makefile
index be8146c20dc8..178149098777 100644
--- a/drivers/platform/mips/Makefile
+++ b/drivers/platform/mips/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o
+obj-$(CONFIG_RS780E_ACPI) += rs780e-acpi.o
diff --git a/drivers/platform/mips/rs780e-acpi.c b/drivers/platform/mips/rs780e-acpi.c
new file mode 100644
index 000000000000..e5a643b78ac9
--- /dev/null
+++ b/drivers/platform/mips/rs780e-acpi.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static unsigned long acpi_iobase;
+
+#define ACPI_PM_EVT_BLK         (acpi_iobase + 0x00) /* 4 bytes */
+#define ACPI_PM_CNT_BLK         (acpi_iobase + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK        (acpi_iobase + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK         (acpi_iobase + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK           (acpi_iobase + 0x10) /* 8 bytes */
+#define ACPI_END                (acpi_iobase + 0x80)
+
+#define PM_INDEX        0xCD6
+#define PM_DATA         0xCD7
+#define PM2_INDEX       0xCD0
+#define PM2_DATA        0xCD1
+
+static void pmio_write_index(u16 index, u8 reg, u8 value)
+{
+	outb(reg, index);
+	outb(value, index + 1);
+}
+
+static u8 pmio_read_index(u16 index, u8 reg)
+{
+	outb(reg, index);
+	return inb(index + 1);
+}
+
+void pm_iowrite(u8 reg, u8 value)
+{
+	pmio_write_index(PM_INDEX, reg, value);
+}
+EXPORT_SYMBOL(pm_iowrite);
+
+u8 pm_ioread(u8 reg)
+{
+	return pmio_read_index(PM_INDEX, reg);
+}
+EXPORT_SYMBOL(pm_ioread);
+
+void pm2_iowrite(u8 reg, u8 value)
+{
+	pmio_write_index(PM2_INDEX, reg, value);
+}
+EXPORT_SYMBOL(pm2_iowrite);
+
+u8 pm2_ioread(u8 reg)
+{
+	return pmio_read_index(PM2_INDEX, reg);
+}
+EXPORT_SYMBOL(pm2_ioread);
+
+static void acpi_hw_clear_status(void)
+{
+	u16 value;
+
+	/* PMStatus: Clear WakeStatus/PwrBtnStatus */
+	value = inw(ACPI_PM_EVT_BLK);
+	value |= (1 << 8 | 1 << 15);
+	outw(value, ACPI_PM_EVT_BLK);
+
+	/* GPEStatus: Clear all generated events */
+	outl(inl(ACPI_GPE0_BLK), ACPI_GPE0_BLK);
+}
+
+void acpi_registers_setup(void)
+{
+	u32 value;
+
+	/* PM Status Base */
+	pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xff);
+	pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8);
+
+	/* PM Control Base */
+	pm_iowrite(0x22, ACPI_PM_CNT_BLK & 0xff);
+	pm_iowrite(0x23, ACPI_PM_CNT_BLK >> 8);
+
+	/* GPM Base */
+	pm_iowrite(0x28, ACPI_GPE0_BLK & 0xff);
+	pm_iowrite(0x29, ACPI_GPE0_BLK >> 8);
+
+	/* ACPI End */
+	pm_iowrite(0x2e, ACPI_END & 0xff);
+	pm_iowrite(0x2f, ACPI_END >> 8);
+
+	/* IO Decode: When AcpiDecodeEnable set, South-Bridge uses the contents
+	 * of the PM registers at index 0x20~0x2B to decode ACPI I/O address. */
+	pm_iowrite(0x0e, 1 << 3);
+
+	/* SCI_EN set */
+	outw(1, ACPI_PM_CNT_BLK);
+
+	/* Enable to generate SCI */
+	pm_iowrite(0x10, pm_ioread(0x10) | 1);
+
+	/* GPM3/GPM9 enable */
+	value = inl(ACPI_GPE0_BLK + 4);
+	outl(value | (1 << 14) | (1 << 22), ACPI_GPE0_BLK + 4);
+
+	/* Set GPM9 as input */
+	pm_iowrite(0x8d, pm_ioread(0x8d) & (~(1 << 1)));
+
+	/* Set GPM9 as non-output */
+	pm_iowrite(0x94, pm_ioread(0x94) | (1 << 3));
+
+	/* GPM3 config ACPI trigger SCIOUT */
+	pm_iowrite(0x33, pm_ioread(0x33) & (~(3 << 4)));
+
+	/* GPM9 config ACPI trigger SCIOUT */
+	pm_iowrite(0x3d, pm_ioread(0x3d) & (~(3 << 2)));
+
+	/* GPM3 config falling edge trigger */
+	pm_iowrite(0x37, pm_ioread(0x37) & (~(1 << 6)));
+
+	/* No wait for STPGNT# in ACPI Sx state */
+	pm_iowrite(0x7c, pm_ioread(0x7c) | (1 << 6));
+
+	/* Set GPM3 pull-down enable */
+	value = pm2_ioread(0xf6);
+	value |= ((1 << 7) | (1 << 3));
+	pm2_iowrite(0xf6, value);
+
+	/* Set GPM9 pull-down enable */
+	value = pm2_ioread(0xf8);
+	value |= ((1 << 5) | (1 << 1));
+	pm2_iowrite(0xf8, value);
+}
+
+static int rs780e_acpi_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res)
+		return -ENODEV;
+
+	/* SCI interrupt need acpi space, allocate here */
+	if (!request_region(res->start, resource_size(res), "acpi")) {
+		pr_err("RS780E-ACPI: Failed to request IO Region\n");
+		return -EBUSY;
+	}
+
+	acpi_iobase = res->start;
+
+	acpi_registers_setup();
+	acpi_hw_clear_status();
+
+	return 0;
+}
+
+static const struct of_device_id rs780e_acpi_match[] = {
+	{ .compatible = "loongson,rs780e-acpi" },
+	{},
+};
+
+static struct platform_driver rs780e_acpi_driver = {
+	.probe = rs780e_acpi_probe,
+	.driver = {
+		.name = "RS780E-ACPI",
+		.of_match_table = rs780e_acpi_match,
+	},
+};
+builtin_platform_driver(rs780e_acpi_driver);
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 0ad7ad8cf8e1..642316761443 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1269,7 +1269,8 @@ config INTEL_UNCORE_FREQ_CONTROL
 config INTEL_BXTWC_PMIC_TMU
 	tristate "Intel BXT Whiskey Cove TMU Driver"
 	depends on REGMAP
-	depends on INTEL_SOC_PMIC_BXTWC && INTEL_PMC_IPC
+	depends on MFD_INTEL_PMC_BXT
+	depends on INTEL_SOC_PMIC_BXTWC
 	---help---
 	  Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature.
 	  This driver enables the alarm wakeup functionality in the TMU unit
@@ -1295,7 +1296,7 @@ config INTEL_MFLD_THERMAL
 
 config INTEL_MID_POWER_BUTTON
 	tristate "power button driver for Intel MID platforms"
-	depends on INTEL_SCU_IPC && INPUT
+	depends on INTEL_SCU && INPUT
 	help
 	  This driver handles the power button on the Intel MID platforms.
 
@@ -1327,14 +1328,6 @@ config INTEL_PMC_CORE
 		- LTR Ignore
 		- MPHY/PLL gating status (Sunrisepoint PCH only)
 
-config INTEL_PMC_IPC
-	tristate "Intel PMC IPC Driver"
-	depends on ACPI && PCI
-	---help---
-	This driver provides support for PMC control on some Intel platforms.
-	The PMC is an ARC processor which defines IPC commands for communication
-	with other entities in the CPU.
-
 config INTEL_PUNIT_IPC
 	tristate "Intel P-Unit IPC Driver"
 	---help---
@@ -1342,17 +1335,30 @@ config INTEL_PUNIT_IPC
 	  which is used to bridge the communications between kernel and P-Unit.
 
 config INTEL_SCU_IPC
-	bool "Intel SCU IPC Support"
-	depends on X86_INTEL_MID
-	default y
-	---help---
-	  IPC is used to bridge the communications between kernel and SCU on
-	  some embedded Intel x86 platforms. This is not needed for PC-type
-	  machines.
+	bool
+
+config INTEL_SCU
+	bool
+	select INTEL_SCU_IPC
+
+config INTEL_SCU_PCI
+	bool "Intel SCU PCI driver"
+	depends on PCI
+	select INTEL_SCU
+	help
+	  This driver is used to bridge the communications between kernel
+	  and SCU on some embedded Intel x86 platforms. It also creates
+	  devices that are connected to the SoC through the SCU.
+	  Platforms supported:
+	    Medfield
+	    Clovertrail
+	    Merrifield
+	    Broxton
+	    Apollo Lake
 
 config INTEL_SCU_IPC_UTIL
 	tristate "Intel SCU IPC utility driver"
-	depends on INTEL_SCU_IPC
+	depends on INTEL_SCU
 	---help---
 	  The IPC Util driver provides an interface with the SCU enabling
 	  low level access for debug work and updating the firmware. Say
@@ -1360,7 +1366,9 @@ config INTEL_SCU_IPC_UTIL
 
 config INTEL_TELEMETRY
 	tristate "Intel SoC Telemetry Driver"
-	depends on INTEL_PMC_IPC && INTEL_PUNIT_IPC && X86_64
+	depends on X86_64
+	depends on MFD_INTEL_PMC_BXT
+	depends on INTEL_PUNIT_IPC
 	---help---
 	  This driver provides interfaces to configure and use
 	  telemetry for INTEL SoC from APL onwards. It is also
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 53408d965874..04db27a25946 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -138,9 +138,9 @@ obj-$(CONFIG_INTEL_MFLD_THERMAL)	+= intel_mid_thermal.o
 obj-$(CONFIG_INTEL_MID_POWER_BUTTON)	+= intel_mid_powerbtn.o
 obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
 obj-$(CONFIG_INTEL_PMC_CORE)		+= intel_pmc_core.o intel_pmc_core_pltdrv.o
-obj-$(CONFIG_INTEL_PMC_IPC)		+= intel_pmc_ipc.o
 obj-$(CONFIG_INTEL_PUNIT_IPC)		+= intel_punit_ipc.o
 obj-$(CONFIG_INTEL_SCU_IPC)		+= intel_scu_ipc.o
+obj-$(CONFIG_INTEL_SCU_PCI)		+= intel_scu_pcidrv.o
 obj-$(CONFIG_INTEL_SCU_IPC_UTIL)	+= intel_scu_ipcutil.o
 obj-$(CONFIG_INTEL_TELEMETRY)		+= intel_telemetry_core.o \
 					   intel_telemetry_pltdrv.o \
diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 6f12747a359a..c4404d9c1de4 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -515,9 +515,33 @@ static struct asus_wmi_driver asus_nb_wmi_driver = {
 	.detect_quirks = asus_nb_wmi_quirks,
 };
 
+static const struct dmi_system_id asus_nb_wmi_blacklist[] __initconst = {
+	{
+		/*
+		 * asus-nb-wm adds no functionality. The T100TA has a detachable
+		 * USB kbd, so no hotkeys and it has no WMI rfkill; and loading
+		 * asus-nb-wm causes the camera LED to turn and _stay_ on.
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+		},
+	},
+	{
+		/* The Asus T200TA has the same issue as the T100TA */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T200TA"),
+		},
+	},
+	{} /* Terminating entry */
+};
 
 static int __init asus_nb_wmi_init(void)
 {
+	if (dmi_check_system(asus_nb_wmi_blacklist))
+		return -ENODEV;
+
 	return asus_wmi_register_driver(&asus_nb_wmi_driver);
 }
 
diff --git a/drivers/platform/x86/intel-uncore-frequency.c b/drivers/platform/x86/intel-uncore-frequency.c
index b96d172eb2c1..12d5ab7e1f5d 100644
--- a/drivers/platform/x86/intel-uncore-frequency.c
+++ b/drivers/platform/x86/intel-uncore-frequency.c
@@ -53,7 +53,7 @@ static int uncore_max_entries __read_mostly;
 /* Storage for uncore data for all instances */
 static struct uncore_data *uncore_instances;
 /* Root of the all uncore sysfs kobjs */
-struct kobject *uncore_root_kobj;
+static struct kobject *uncore_root_kobj;
 /* Stores the CPU mask of the target CPUs to use during uncore read/write */
 static cpumask_t uncore_cpu_mask;
 /* CPU online callback register instance */
diff --git a/drivers/platform/x86/intel_cht_int33fe_typec.c b/drivers/platform/x86/intel_cht_int33fe_typec.c
index 04138215956b..48638d1c56e5 100644
--- a/drivers/platform/x86/intel_cht_int33fe_typec.c
+++ b/drivers/platform/x86/intel_cht_int33fe_typec.c
@@ -6,14 +6,14 @@
  *
  * Some Intel Cherry Trail based device which ship with Windows 10, have
  * this weird INT33FE ACPI device with a CRS table with 4 I2cSerialBusV2
- * resources, for 4 different chips attached to various i2c busses:
- * 1. The Whiskey Cove pmic, which is also described by the INT34D3 ACPI device
+ * resources, for 4 different chips attached to various I²C buses:
+ * 1. The Whiskey Cove PMIC, which is also described by the INT34D3 ACPI device
  * 2. Maxim MAX17047 Fuel Gauge Controller
  * 3. FUSB302 USB Type-C Controller
  * 4. PI3USB30532 USB switch
  *
  * So this driver is a stub / pseudo driver whose only purpose is to
- * instantiate i2c-clients for chips 2 - 4, so that standard i2c drivers
+ * instantiate I²C clients for chips 2 - 4, so that standard I²C drivers
  * for these chips can bind to the them.
  */
 
@@ -21,43 +21,32 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/usb/pd.h>
 
 #include "intel_cht_int33fe_common.h"
 
-enum {
-	INT33FE_NODE_FUSB302,
-	INT33FE_NODE_MAX17047,
-	INT33FE_NODE_PI3USB30532,
-	INT33FE_NODE_DISPLAYPORT,
-	INT33FE_NODE_USB_CONNECTOR,
-	INT33FE_NODE_MAX,
-};
-
 /*
- * Grrr I severly dislike buggy BIOS-es. At least one BIOS enumerates
+ * Grrr, I severely dislike buggy BIOS-es. At least one BIOS enumerates
  * the max17047 both through the INT33FE ACPI device (it is right there
  * in the resources table) as well as through a separate MAX17047 device.
  *
- * These helpers are used to work around this by checking if an i2c-client
+ * These helpers are used to work around this by checking if an I²C client
  * for the max17047 has already been registered.
  */
 static int cht_int33fe_check_for_max17047(struct device *dev, void *data)
 {
 	struct i2c_client **max17047 = data;
 	struct acpi_device *adev;
-	const char *hid;
 
 	adev = ACPI_COMPANION(dev);
 	if (!adev)
 		return 0;
 
-	hid = acpi_device_hid(adev);
-
 	/* The MAX17047 ACPI node doesn't have an UID, so we don't check that */
-	if (strcmp(hid, "MAX17047"))
+	if (!acpi_dev_hid_uid_match(adev, "MAX17047", NULL))
 		return 0;
 
 	*max17047 = to_i2c_client(dev);
@@ -66,11 +55,16 @@ static int cht_int33fe_check_for_max17047(struct device *dev, void *data)
 
 static const char * const max17047_suppliers[] = { "bq24190-charger" };
 
-static const struct property_entry max17047_props[] = {
+static const struct property_entry max17047_properties[] = {
 	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", max17047_suppliers),
 	{ }
 };
 
+static const struct software_node max17047_node = {
+	.name = "max17047",
+	.properties = max17047_properties,
+};
+
 /*
  * We are not using inline property here because those are constant,
  * and we need to adjust this one at runtime to point to real
@@ -80,12 +74,17 @@ static struct software_node_ref_args fusb302_mux_refs[] = {
 	{ .node = NULL },
 };
 
-static const struct property_entry fusb302_props[] = {
+static const struct property_entry fusb302_properties[] = {
 	PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"),
 	PROPERTY_ENTRY_REF_ARRAY("usb-role-switch", fusb302_mux_refs),
 	{ }
 };
 
+static const struct software_node fusb302_node = {
+	.name = "fusb302",
+	.properties = fusb302_properties,
+};
+
 #define PDO_FIXED_FLAGS \
 	(PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
 
@@ -98,31 +97,40 @@ static const u32 snk_pdo[] = {
 	PDO_VAR(5000, 12000, 3000),
 };
 
-static const struct software_node nodes[];
+static const struct software_node pi3usb30532_node = {
+	.name = "pi3usb30532",
+};
+
+static const struct software_node displayport_node = {
+	.name = "displayport",
+};
 
-static const struct property_entry usb_connector_props[] = {
+static const struct property_entry usb_connector_properties[] = {
 	PROPERTY_ENTRY_STRING("data-role", "dual"),
 	PROPERTY_ENTRY_STRING("power-role", "dual"),
 	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
 	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
 	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
 	PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
-	PROPERTY_ENTRY_REF("orientation-switch",
-			   &nodes[INT33FE_NODE_PI3USB30532]),
-	PROPERTY_ENTRY_REF("mode-switch",
-			   &nodes[INT33FE_NODE_PI3USB30532]),
-	PROPERTY_ENTRY_REF("displayport",
-			   &nodes[INT33FE_NODE_DISPLAYPORT]),
+	PROPERTY_ENTRY_REF("orientation-switch", &pi3usb30532_node),
+	PROPERTY_ENTRY_REF("mode-switch", &pi3usb30532_node),
+	PROPERTY_ENTRY_REF("displayport", &displayport_node),
 	{ }
 };
 
-static const struct software_node nodes[] = {
-	{ "fusb302", NULL, fusb302_props },
-	{ "max17047", NULL, max17047_props },
-	{ "pi3usb30532" },
-	{ "displayport" },
-	{ "connector", &nodes[0], usb_connector_props },
-	{ }
+static const struct software_node usb_connector_node = {
+	.name = "connector",
+	.parent = &fusb302_node,
+	.properties = usb_connector_properties,
+};
+
+static const struct software_node *node_group[] = {
+	&fusb302_node,
+	&max17047_node,
+	&pi3usb30532_node,
+	&displayport_node,
+	&usb_connector_node,
+	NULL
 };
 
 static int cht_int33fe_setup_dp(struct cht_int33fe_data *data)
@@ -130,7 +138,7 @@ static int cht_int33fe_setup_dp(struct cht_int33fe_data *data)
 	struct fwnode_handle *fwnode;
 	struct pci_dev *pdev;
 
-	fwnode = software_node_fwnode(&nodes[INT33FE_NODE_DISPLAYPORT]);
+	fwnode = software_node_fwnode(&displayport_node);
 	if (!fwnode)
 		return -ENODEV;
 
@@ -155,11 +163,10 @@ static int cht_int33fe_setup_dp(struct cht_int33fe_data *data)
 
 static void cht_int33fe_remove_nodes(struct cht_int33fe_data *data)
 {
-	software_node_unregister_nodes(nodes);
+	software_node_unregister_node_group(node_group);
 
 	if (fusb302_mux_refs[0].node) {
-		fwnode_handle_put(
-			software_node_fwnode(fusb302_mux_refs[0].node));
+		fwnode_handle_put(software_node_fwnode(fusb302_mux_refs[0].node));
 		fusb302_mux_refs[0].node = NULL;
 	}
 
@@ -192,7 +199,7 @@ static int cht_int33fe_add_nodes(struct cht_int33fe_data *data)
 	 */
 	fusb302_mux_refs[0].node = mux_ref_node;
 
-	ret = software_node_register_nodes(nodes);
+	ret = software_node_register_node_group(node_group);
 	if (ret)
 		return ret;
 
@@ -222,16 +229,15 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
 	struct fwnode_handle *fwnode;
 	int ret;
 
-	fwnode = software_node_fwnode(&nodes[INT33FE_NODE_MAX17047]);
+	fwnode = software_node_fwnode(&max17047_node);
 	if (!fwnode)
 		return -ENODEV;
 
 	i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
 	if (max17047) {
-		/* Pre-existing i2c-client for the max17047, add device-props */
-		fwnode->secondary = ERR_PTR(-ENODEV);
-		max17047->dev.fwnode->secondary = fwnode;
-		/* And re-probe to get the new device-props applied. */
+		/* Pre-existing I²C client for the max17047, add device properties */
+		set_secondary_fwnode(&max17047->dev, fwnode);
+		/* And re-probe to get the new device properties applied */
 		ret = device_reprobe(&max17047->dev);
 		if (ret)
 			dev_warn(dev, "Reprobing max17047 error: %d\n", ret);
@@ -266,7 +272,7 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data)
 	 *    must be registered before the fusb302 is instantiated, otherwise
 	 *    it will end up with a dummy-regulator.
 	 * Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data
-	 * which is defined in i2c-cht-wc.c from where the bq24292i i2c-client
+	 * which is defined in i2c-cht-wc.c from where the bq24292i I²C client
 	 * gets instantiated. We use regulator_get_optional here so that we
 	 * don't end up getting a dummy-regulator ourselves.
 	 */
@@ -277,7 +283,7 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data)
 	}
 	regulator_put(regulator);
 
-	/* The FUSB302 uses the irq at index 1 and is the only irq user */
+	/* The FUSB302 uses the IRQ at index 1 and is the only IRQ user */
 	fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1);
 	if (fusb302_irq < 0) {
 		if (fusb302_irq != -EPROBE_DEFER)
@@ -289,12 +295,12 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data)
 	if (ret)
 		return ret;
 
-	/* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */
+	/* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047() */
 	ret = cht_int33fe_register_max17047(dev, data);
 	if (ret)
 		goto out_remove_nodes;
 
-	fwnode = software_node_fwnode(&nodes[INT33FE_NODE_FUSB302]);
+	fwnode = software_node_fwnode(&fusb302_node);
 	if (!fwnode) {
 		ret = -ENODEV;
 		goto out_unregister_max17047;
@@ -312,7 +318,7 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data)
 		goto out_unregister_max17047;
 	}
 
-	fwnode = software_node_fwnode(&nodes[INT33FE_NODE_PI3USB30532]);
+	fwnode = software_node_fwnode(&pi3usb30532_node);
 	if (!fwnode) {
 		ret = -ENODEV;
 		goto out_unregister_fusb302;
diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c
index 9c9f209c8a33..df434abbb66f 100644
--- a/drivers/platform/x86/intel_mid_powerbtn.c
+++ b/drivers/platform/x86/intel_mid_powerbtn.c
@@ -46,6 +46,7 @@ struct mid_pb_ddata {
 	unsigned short mirqlvl1_addr;
 	unsigned short pbstat_addr;
 	u8 pbstat_mask;
+	struct intel_scu_ipc_dev *scu;
 	int (*setup)(struct mid_pb_ddata *ddata);
 };
 
@@ -55,7 +56,8 @@ static int mid_pbstat(struct mid_pb_ddata *ddata, int *value)
 	int ret;
 	u8 pbstat;
 
-	ret = intel_scu_ipc_ioread8(ddata->pbstat_addr, &pbstat);
+	ret = intel_scu_ipc_dev_ioread8(ddata->scu, ddata->pbstat_addr,
+					&pbstat);
 	if (ret)
 		return ret;
 
@@ -67,14 +69,15 @@ static int mid_pbstat(struct mid_pb_ddata *ddata, int *value)
 
 static int mid_irq_ack(struct mid_pb_ddata *ddata)
 {
-	return intel_scu_ipc_update_register(ddata->mirqlvl1_addr, 0, MSIC_PWRBTNM);
+	return intel_scu_ipc_dev_update(ddata->scu, ddata->mirqlvl1_addr, 0,
+					MSIC_PWRBTNM);
 }
 
 static int mrfld_setup(struct mid_pb_ddata *ddata)
 {
 	/* Unmask the PBIRQ and MPBIRQ on Tangier */
-	intel_scu_ipc_update_register(BCOVE_PBIRQ, 0, MSIC_PWRBTNM);
-	intel_scu_ipc_update_register(BCOVE_PBIRQMASK, 0, MSIC_PWRBTNM);
+	intel_scu_ipc_dev_update(ddata->scu, BCOVE_PBIRQ, 0, MSIC_PWRBTNM);
+	intel_scu_ipc_dev_update(ddata->scu, BCOVE_PBIRQMASK, 0, MSIC_PWRBTNM);
 
 	return 0;
 }
@@ -161,6 +164,10 @@ static int mid_pb_probe(struct platform_device *pdev)
 			return error;
 	}
 
+	ddata->scu = devm_intel_scu_ipc_dev_get(&pdev->dev);
+	if (!ddata->scu)
+		return -EPROBE_DEFER;
+
 	error = devm_request_threaded_irq(&pdev->dev, irq, NULL, mid_pb_isr,
 					  IRQF_ONESHOT, DRIVER_NAME, ddata);
 	if (error) {
diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index d2a5d4c36715..a130859ec49e 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -255,7 +255,7 @@ static const struct pmc_bit_map *ext_cnp_pfear_map[] = {
 };
 
 static const struct pmc_bit_map icl_pfear_map[] = {
-	/* Ice Lake generation onwards only */
+	/* Ice Lake and Jasper Lake generation onwards only */
 	{"RES_65",		BIT(0)},
 	{"RES_66",		BIT(1)},
 	{"RES_67",		BIT(2)},
@@ -274,7 +274,7 @@ static const struct pmc_bit_map *ext_icl_pfear_map[] = {
 };
 
 static const struct pmc_bit_map tgl_pfear_map[] = {
-	/* Tiger Lake, Elkhart Lake and Jasper Lake generation onwards only */
+	/* Tiger Lake and Elkhart Lake generation onwards only */
 	{"PSF9",		BIT(0)},
 	{"RES_66",		BIT(1)},
 	{"RES_67",		BIT(2)},
@@ -1156,7 +1156,7 @@ static const struct x86_cpu_id intel_pmc_core_ids[] = {
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L,		&tgl_reg_map),
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE,		&tgl_reg_map),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	&tgl_reg_map),
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&icl_reg_map),
 	{}
 };
 
diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
deleted file mode 100644
index 2433bf73f1ed..000000000000
--- a/drivers/platform/x86/intel_pmc_ipc.c
+++ /dev/null
@@ -1,949 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Driver for the Intel PMC IPC mechanism
- *
- * (C) Copyright 2014-2015 Intel Corporation
- *
- * This driver is based on Intel SCU IPC driver(intel_scu_ipc.c) by
- *     Sreedhara DS <sreedhara.ds@intel.com>
- *
- * PMC running in ARC processor communicates with other entity running in IA
- * core through IPC mechanism which in turn messaging between IA core ad PMC.
- */
-
-#include <linux/acpi.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/io-64-nonatomic-lo-hi.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-
-#include <asm/intel_pmc_ipc.h>
-
-#include <linux/platform_data/itco_wdt.h>
-
-/*
- * IPC registers
- * The IA write to IPC_CMD command register triggers an interrupt to the ARC,
- * The ARC handles the interrupt and services it, writing optional data to
- * the IPC1 registers, updates the IPC_STS response register with the status.
- */
-#define IPC_CMD			0x00
-#define		IPC_CMD_MSI		BIT(8)
-#define		IPC_CMD_SIZE		16
-#define		IPC_CMD_SUBCMD		12
-#define IPC_STATUS		0x04
-#define		IPC_STATUS_IRQ		BIT(2)
-#define		IPC_STATUS_ERR		BIT(1)
-#define		IPC_STATUS_BUSY		BIT(0)
-#define IPC_SPTR		0x08
-#define IPC_DPTR		0x0C
-#define IPC_WRITE_BUFFER	0x80
-#define IPC_READ_BUFFER		0x90
-
-/* Residency with clock rate at 19.2MHz to usecs */
-#define S0IX_RESIDENCY_IN_USECS(d, s)		\
-({						\
-	u64 result = 10ull * ((d) + (s));	\
-	do_div(result, 192);			\
-	result;					\
-})
-
-/*
- * 16-byte buffer for sending data associated with IPC command.
- */
-#define IPC_DATA_BUFFER_SIZE	16
-
-#define IPC_LOOP_CNT		3000000
-#define IPC_MAX_SEC		3
-
-#define IPC_TRIGGER_MODE_IRQ		true
-
-/* exported resources from IFWI */
-#define PLAT_RESOURCE_IPC_INDEX		0
-#define PLAT_RESOURCE_IPC_SIZE		0x1000
-#define PLAT_RESOURCE_GCR_OFFSET	0x1000
-#define PLAT_RESOURCE_GCR_SIZE		0x1000
-#define PLAT_RESOURCE_BIOS_DATA_INDEX	1
-#define PLAT_RESOURCE_BIOS_IFACE_INDEX	2
-#define PLAT_RESOURCE_TELEM_SSRAM_INDEX	3
-#define PLAT_RESOURCE_ISP_DATA_INDEX	4
-#define PLAT_RESOURCE_ISP_IFACE_INDEX	5
-#define PLAT_RESOURCE_GTD_DATA_INDEX	6
-#define PLAT_RESOURCE_GTD_IFACE_INDEX	7
-#define PLAT_RESOURCE_ACPI_IO_INDEX	0
-
-/*
- * BIOS does not create an ACPI device for each PMC function,
- * but exports multiple resources from one ACPI device(IPC) for
- * multiple functions. This driver is responsible to create a
- * platform device and to export resources for those functions.
- */
-#define TCO_DEVICE_NAME			"iTCO_wdt"
-#define SMI_EN_OFFSET			0x40
-#define SMI_EN_SIZE			4
-#define TCO_BASE_OFFSET			0x60
-#define TCO_REGS_SIZE			16
-#define PUNIT_DEVICE_NAME		"intel_punit_ipc"
-#define TELEMETRY_DEVICE_NAME		"intel_telemetry"
-#define TELEM_SSRAM_SIZE		240
-#define TELEM_PMC_SSRAM_OFFSET		0x1B00
-#define TELEM_PUNIT_SSRAM_OFFSET	0x1A00
-#define TCO_PMC_OFFSET			0x08
-#define TCO_PMC_SIZE			0x04
-
-/* PMC register bit definitions */
-
-/* PMC_CFG_REG bit masks */
-#define PMC_CFG_NO_REBOOT_MASK		BIT_MASK(4)
-#define PMC_CFG_NO_REBOOT_EN		(1 << 4)
-#define PMC_CFG_NO_REBOOT_DIS		(0 << 4)
-
-static struct intel_pmc_ipc_dev {
-	struct device *dev;
-	void __iomem *ipc_base;
-	bool irq_mode;
-	int irq;
-	int cmd;
-	struct completion cmd_complete;
-
-	/* The following PMC BARs share the same ACPI device with the IPC */
-	resource_size_t acpi_io_base;
-	int acpi_io_size;
-	struct platform_device *tco_dev;
-
-	/* gcr */
-	void __iomem *gcr_mem_base;
-	bool has_gcr_regs;
-	spinlock_t gcr_lock;
-
-	/* punit */
-	struct platform_device *punit_dev;
-	unsigned int punit_res_count;
-
-	/* Telemetry */
-	resource_size_t telem_pmc_ssram_base;
-	resource_size_t telem_punit_ssram_base;
-	int telem_pmc_ssram_size;
-	int telem_punit_ssram_size;
-	u8 telem_res_inval;
-	struct platform_device *telemetry_dev;
-} ipcdev;
-
-static char *ipc_err_sources[] = {
-	[IPC_ERR_NONE] =
-		"no error",
-	[IPC_ERR_CMD_NOT_SUPPORTED] =
-		"command not supported",
-	[IPC_ERR_CMD_NOT_SERVICED] =
-		"command not serviced",
-	[IPC_ERR_UNABLE_TO_SERVICE] =
-		"unable to service",
-	[IPC_ERR_CMD_INVALID] =
-		"command invalid",
-	[IPC_ERR_CMD_FAILED] =
-		"command failed",
-	[IPC_ERR_EMSECURITY] =
-		"Invalid Battery",
-	[IPC_ERR_UNSIGNEDKERNEL] =
-		"Unsigned kernel",
-};
-
-/* Prevent concurrent calls to the PMC */
-static DEFINE_MUTEX(ipclock);
-
-static inline void ipc_send_command(u32 cmd)
-{
-	ipcdev.cmd = cmd;
-	if (ipcdev.irq_mode) {
-		reinit_completion(&ipcdev.cmd_complete);
-		cmd |= IPC_CMD_MSI;
-	}
-	writel(cmd, ipcdev.ipc_base + IPC_CMD);
-}
-
-static inline u32 ipc_read_status(void)
-{
-	return readl(ipcdev.ipc_base + IPC_STATUS);
-}
-
-static inline void ipc_data_writel(u32 data, u32 offset)
-{
-	writel(data, ipcdev.ipc_base + IPC_WRITE_BUFFER + offset);
-}
-
-static inline u32 ipc_data_readl(u32 offset)
-{
-	return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
-}
-
-static inline u64 gcr_data_readq(u32 offset)
-{
-	return readq(ipcdev.gcr_mem_base + offset);
-}
-
-static inline int is_gcr_valid(u32 offset)
-{
-	if (!ipcdev.has_gcr_regs)
-		return -EACCES;
-
-	if (offset > PLAT_RESOURCE_GCR_SIZE)
-		return -EINVAL;
-
-	return 0;
-}
-
-/**
- * intel_pmc_gcr_read64() - Read a 64-bit PMC GCR register
- * @offset:	offset of GCR register from GCR address base
- * @data:	data pointer for storing the register output
- *
- * Reads the 64-bit PMC GCR register at given offset.
- *
- * Return:	negative value on error or 0 on success.
- */
-int intel_pmc_gcr_read64(u32 offset, u64 *data)
-{
-	int ret;
-
-	spin_lock(&ipcdev.gcr_lock);
-
-	ret = is_gcr_valid(offset);
-	if (ret < 0) {
-		spin_unlock(&ipcdev.gcr_lock);
-		return ret;
-	}
-
-	*data = readq(ipcdev.gcr_mem_base + offset);
-
-	spin_unlock(&ipcdev.gcr_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(intel_pmc_gcr_read64);
-
-/**
- * intel_pmc_gcr_update() - Update PMC GCR register bits
- * @offset:	offset of GCR register from GCR address base
- * @mask:	bit mask for update operation
- * @val:	update value
- *
- * Updates the bits of given GCR register as specified by
- * @mask and @val.
- *
- * Return:	negative value on error or 0 on success.
- */
-static int intel_pmc_gcr_update(u32 offset, u32 mask, u32 val)
-{
-	u32 new_val;
-	int ret = 0;
-
-	spin_lock(&ipcdev.gcr_lock);
-
-	ret = is_gcr_valid(offset);
-	if (ret < 0)
-		goto gcr_ipc_unlock;
-
-	new_val = readl(ipcdev.gcr_mem_base + offset);
-
-	new_val &= ~mask;
-	new_val |= val & mask;
-
-	writel(new_val, ipcdev.gcr_mem_base + offset);
-
-	new_val = readl(ipcdev.gcr_mem_base + offset);
-
-	/* check whether the bit update is successful */
-	if ((new_val & mask) != (val & mask)) {
-		ret = -EIO;
-		goto gcr_ipc_unlock;
-	}
-
-gcr_ipc_unlock:
-	spin_unlock(&ipcdev.gcr_lock);
-	return ret;
-}
-
-static int update_no_reboot_bit(void *priv, bool set)
-{
-	u32 value = set ? PMC_CFG_NO_REBOOT_EN : PMC_CFG_NO_REBOOT_DIS;
-
-	return intel_pmc_gcr_update(PMC_GCR_PMC_CFG_REG,
-				    PMC_CFG_NO_REBOOT_MASK, value);
-}
-
-static int intel_pmc_ipc_check_status(void)
-{
-	int status;
-	int ret = 0;
-
-	if (ipcdev.irq_mode) {
-		if (0 == wait_for_completion_timeout(
-				&ipcdev.cmd_complete, IPC_MAX_SEC * HZ))
-			ret = -ETIMEDOUT;
-	} else {
-		int loop_count = IPC_LOOP_CNT;
-
-		while ((ipc_read_status() & IPC_STATUS_BUSY) && --loop_count)
-			udelay(1);
-		if (loop_count == 0)
-			ret = -ETIMEDOUT;
-	}
-
-	status = ipc_read_status();
-	if (ret == -ETIMEDOUT) {
-		dev_err(ipcdev.dev,
-			"IPC timed out, TS=0x%x, CMD=0x%x\n",
-			status, ipcdev.cmd);
-		return ret;
-	}
-
-	if (status & IPC_STATUS_ERR) {
-		int i;
-
-		ret = -EIO;
-		i = (status >> IPC_CMD_SIZE) & 0xFF;
-		if (i < ARRAY_SIZE(ipc_err_sources))
-			dev_err(ipcdev.dev,
-				"IPC failed: %s, STS=0x%x, CMD=0x%x\n",
-				ipc_err_sources[i], status, ipcdev.cmd);
-		else
-			dev_err(ipcdev.dev,
-				"IPC failed: unknown, STS=0x%x, CMD=0x%x\n",
-				status, ipcdev.cmd);
-		if ((i == IPC_ERR_UNSIGNEDKERNEL) || (i == IPC_ERR_EMSECURITY))
-			ret = -EACCES;
-	}
-
-	return ret;
-}
-
-/**
- * intel_pmc_ipc_simple_command() - Simple IPC command
- * @cmd:	IPC command code.
- * @sub:	IPC command sub type.
- *
- * Send a simple IPC command to PMC when don't need to specify
- * input/output data and source/dest pointers.
- *
- * Return:	an IPC error code or 0 on success.
- */
-static int intel_pmc_ipc_simple_command(int cmd, int sub)
-{
-	int ret;
-
-	mutex_lock(&ipclock);
-	if (ipcdev.dev == NULL) {
-		mutex_unlock(&ipclock);
-		return -ENODEV;
-	}
-	ipc_send_command(sub << IPC_CMD_SUBCMD | cmd);
-	ret = intel_pmc_ipc_check_status();
-	mutex_unlock(&ipclock);
-
-	return ret;
-}
-
-/**
- * intel_pmc_ipc_raw_cmd() - IPC command with data and pointers
- * @cmd:	IPC command code.
- * @sub:	IPC command sub type.
- * @in:		input data of this IPC command.
- * @inlen:	input data length in bytes.
- * @out:	output data of this IPC command.
- * @outlen:	output data length in dwords.
- * @sptr:	data writing to SPTR register.
- * @dptr:	data writing to DPTR register.
- *
- * Send an IPC command to PMC with input/output data and source/dest pointers.
- *
- * Return:	an IPC error code or 0 on success.
- */
-static int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen, u32 *out,
-				 u32 outlen, u32 dptr, u32 sptr)
-{
-	u32 wbuf[4] = { 0 };
-	int ret;
-	int i;
-
-	if (inlen > IPC_DATA_BUFFER_SIZE || outlen > IPC_DATA_BUFFER_SIZE / 4)
-		return -EINVAL;
-
-	mutex_lock(&ipclock);
-	if (ipcdev.dev == NULL) {
-		mutex_unlock(&ipclock);
-		return -ENODEV;
-	}
-	memcpy(wbuf, in, inlen);
-	writel(dptr, ipcdev.ipc_base + IPC_DPTR);
-	writel(sptr, ipcdev.ipc_base + IPC_SPTR);
-	/* The input data register is 32bit register and inlen is in Byte */
-	for (i = 0; i < ((inlen + 3) / 4); i++)
-		ipc_data_writel(wbuf[i], 4 * i);
-	ipc_send_command((inlen << IPC_CMD_SIZE) |
-			(sub << IPC_CMD_SUBCMD) | cmd);
-	ret = intel_pmc_ipc_check_status();
-	if (!ret) {
-		/* out is read from 32bit register and outlen is in 32bit */
-		for (i = 0; i < outlen; i++)
-			*out++ = ipc_data_readl(4 * i);
-	}
-	mutex_unlock(&ipclock);
-
-	return ret;
-}
-
-/**
- * intel_pmc_ipc_command() -  IPC command with input/output data
- * @cmd:	IPC command code.
- * @sub:	IPC command sub type.
- * @in:		input data of this IPC command.
- * @inlen:	input data length in bytes.
- * @out:	output data of this IPC command.
- * @outlen:	output data length in dwords.
- *
- * Send an IPC command to PMC with input/output data.
- *
- * Return:	an IPC error code or 0 on success.
- */
-int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
-			  u32 *out, u32 outlen)
-{
-	return intel_pmc_ipc_raw_cmd(cmd, sub, in, inlen, out, outlen, 0, 0);
-}
-EXPORT_SYMBOL_GPL(intel_pmc_ipc_command);
-
-static irqreturn_t ioc(int irq, void *dev_id)
-{
-	int status;
-
-	if (ipcdev.irq_mode) {
-		status = ipc_read_status();
-		writel(status | IPC_STATUS_IRQ, ipcdev.ipc_base + IPC_STATUS);
-	}
-	complete(&ipcdev.cmd_complete);
-
-	return IRQ_HANDLED;
-}
-
-static int ipc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
-	struct intel_pmc_ipc_dev *pmc = &ipcdev;
-	int ret;
-
-	/* Only one PMC is supported */
-	if (pmc->dev)
-		return -EBUSY;
-
-	pmc->irq_mode = IPC_TRIGGER_MODE_IRQ;
-
-	spin_lock_init(&ipcdev.gcr_lock);
-
-	ret = pcim_enable_device(pdev);
-	if (ret)
-		return ret;
-
-	ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
-	if (ret)
-		return ret;
-
-	init_completion(&pmc->cmd_complete);
-
-	pmc->ipc_base = pcim_iomap_table(pdev)[0];
-
-	ret = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_pmc_ipc",
-				pmc);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to request irq\n");
-		return ret;
-	}
-
-	pmc->dev = &pdev->dev;
-
-	pci_set_drvdata(pdev, pmc);
-
-	return 0;
-}
-
-static const struct pci_device_id ipc_pci_ids[] = {
-	{PCI_VDEVICE(INTEL, 0x0a94), 0},
-	{PCI_VDEVICE(INTEL, 0x1a94), 0},
-	{PCI_VDEVICE(INTEL, 0x5a94), 0},
-	{ 0,}
-};
-MODULE_DEVICE_TABLE(pci, ipc_pci_ids);
-
-static struct pci_driver ipc_pci_driver = {
-	.name = "intel_pmc_ipc",
-	.id_table = ipc_pci_ids,
-	.probe = ipc_pci_probe,
-};
-
-static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
-					      struct device_attribute *attr,
-					      const char *buf, size_t count)
-{
-	int subcmd;
-	int cmd;
-	int ret;
-
-	ret = sscanf(buf, "%d %d", &cmd, &subcmd);
-	if (ret != 2) {
-		dev_err(dev, "Error args\n");
-		return -EINVAL;
-	}
-
-	ret = intel_pmc_ipc_simple_command(cmd, subcmd);
-	if (ret) {
-		dev_err(dev, "command %d error with %d\n", cmd, ret);
-		return ret;
-	}
-	return (ssize_t)count;
-}
-static DEVICE_ATTR(simplecmd, 0200, NULL, intel_pmc_ipc_simple_cmd_store);
-
-static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
-					     struct device_attribute *attr,
-					     const char *buf, size_t count)
-{
-	unsigned long val;
-	int subcmd;
-	int ret;
-
-	ret = kstrtoul(buf, 0, &val);
-	if (ret)
-		return ret;
-
-	if (val)
-		subcmd = 1;
-	else
-		subcmd = 0;
-	ret = intel_pmc_ipc_simple_command(PMC_IPC_NORTHPEAK_CTRL, subcmd);
-	if (ret) {
-		dev_err(dev, "command north %d error with %d\n", subcmd, ret);
-		return ret;
-	}
-	return (ssize_t)count;
-}
-static DEVICE_ATTR(northpeak, 0200, NULL, intel_pmc_ipc_northpeak_store);
-
-static struct attribute *intel_ipc_attrs[] = {
-	&dev_attr_northpeak.attr,
-	&dev_attr_simplecmd.attr,
-	NULL
-};
-
-static const struct attribute_group intel_ipc_group = {
-	.attrs = intel_ipc_attrs,
-};
-
-static const struct attribute_group *intel_ipc_groups[] = {
-	&intel_ipc_group,
-	NULL
-};
-
-static struct resource punit_res_array[] = {
-	/* Punit BIOS */
-	{
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.flags = IORESOURCE_MEM,
-	},
-	/* Punit ISP */
-	{
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.flags = IORESOURCE_MEM,
-	},
-	/* Punit GTD */
-	{
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-#define TCO_RESOURCE_ACPI_IO		0
-#define TCO_RESOURCE_SMI_EN_IO		1
-#define TCO_RESOURCE_GCR_MEM		2
-static struct resource tco_res[] = {
-	/* ACPI - TCO */
-	{
-		.flags = IORESOURCE_IO,
-	},
-	/* ACPI - SMI */
-	{
-		.flags = IORESOURCE_IO,
-	},
-};
-
-static struct itco_wdt_platform_data tco_info = {
-	.name = "Apollo Lake SoC",
-	.version = 5,
-	.no_reboot_priv = &ipcdev,
-	.update_no_reboot_bit = update_no_reboot_bit,
-};
-
-#define TELEMETRY_RESOURCE_PUNIT_SSRAM	0
-#define TELEMETRY_RESOURCE_PMC_SSRAM	1
-static struct resource telemetry_res[] = {
-	/*Telemetry*/
-	{
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static int ipc_create_punit_device(void)
-{
-	struct platform_device *pdev;
-	const struct platform_device_info pdevinfo = {
-		.parent = ipcdev.dev,
-		.name = PUNIT_DEVICE_NAME,
-		.id = -1,
-		.res = punit_res_array,
-		.num_res = ipcdev.punit_res_count,
-		};
-
-	pdev = platform_device_register_full(&pdevinfo);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	ipcdev.punit_dev = pdev;
-
-	return 0;
-}
-
-static int ipc_create_tco_device(void)
-{
-	struct platform_device *pdev;
-	struct resource *res;
-	const struct platform_device_info pdevinfo = {
-		.parent = ipcdev.dev,
-		.name = TCO_DEVICE_NAME,
-		.id = -1,
-		.res = tco_res,
-		.num_res = ARRAY_SIZE(tco_res),
-		.data = &tco_info,
-		.size_data = sizeof(tco_info),
-		};
-
-	res = tco_res + TCO_RESOURCE_ACPI_IO;
-	res->start = ipcdev.acpi_io_base + TCO_BASE_OFFSET;
-	res->end = res->start + TCO_REGS_SIZE - 1;
-
-	res = tco_res + TCO_RESOURCE_SMI_EN_IO;
-	res->start = ipcdev.acpi_io_base + SMI_EN_OFFSET;
-	res->end = res->start + SMI_EN_SIZE - 1;
-
-	pdev = platform_device_register_full(&pdevinfo);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	ipcdev.tco_dev = pdev;
-
-	return 0;
-}
-
-static int ipc_create_telemetry_device(void)
-{
-	struct platform_device *pdev;
-	struct resource *res;
-	const struct platform_device_info pdevinfo = {
-		.parent = ipcdev.dev,
-		.name = TELEMETRY_DEVICE_NAME,
-		.id = -1,
-		.res = telemetry_res,
-		.num_res = ARRAY_SIZE(telemetry_res),
-		};
-
-	res = telemetry_res + TELEMETRY_RESOURCE_PUNIT_SSRAM;
-	res->start = ipcdev.telem_punit_ssram_base;
-	res->end = res->start + ipcdev.telem_punit_ssram_size - 1;
-
-	res = telemetry_res + TELEMETRY_RESOURCE_PMC_SSRAM;
-	res->start = ipcdev.telem_pmc_ssram_base;
-	res->end = res->start + ipcdev.telem_pmc_ssram_size - 1;
-
-	pdev = platform_device_register_full(&pdevinfo);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	ipcdev.telemetry_dev = pdev;
-
-	return 0;
-}
-
-static int ipc_create_pmc_devices(void)
-{
-	int ret;
-
-	/* If we have ACPI based watchdog use that instead */
-	if (!acpi_has_watchdog()) {
-		ret = ipc_create_tco_device();
-		if (ret) {
-			dev_err(ipcdev.dev, "Failed to add tco platform device\n");
-			return ret;
-		}
-	}
-
-	ret = ipc_create_punit_device();
-	if (ret) {
-		dev_err(ipcdev.dev, "Failed to add punit platform device\n");
-		platform_device_unregister(ipcdev.tco_dev);
-		return ret;
-	}
-
-	if (!ipcdev.telem_res_inval) {
-		ret = ipc_create_telemetry_device();
-		if (ret) {
-			dev_warn(ipcdev.dev,
-				"Failed to add telemetry platform device\n");
-			platform_device_unregister(ipcdev.punit_dev);
-			platform_device_unregister(ipcdev.tco_dev);
-		}
-	}
-
-	return ret;
-}
-
-static int ipc_plat_get_res(struct platform_device *pdev)
-{
-	struct resource *res, *punit_res = punit_res_array;
-	void __iomem *addr;
-	int size;
-
-	res = platform_get_resource(pdev, IORESOURCE_IO,
-				    PLAT_RESOURCE_ACPI_IO_INDEX);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get io resource\n");
-		return -ENXIO;
-	}
-	size = resource_size(res);
-	ipcdev.acpi_io_base = res->start;
-	ipcdev.acpi_io_size = size;
-	dev_info(&pdev->dev, "io res: %pR\n", res);
-
-	ipcdev.punit_res_count = 0;
-
-	/* This is index 0 to cover BIOS data register */
-	res = platform_get_resource(pdev, IORESOURCE_MEM,
-				    PLAT_RESOURCE_BIOS_DATA_INDEX);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get res of punit BIOS data\n");
-		return -ENXIO;
-	}
-	punit_res[ipcdev.punit_res_count++] = *res;
-	dev_info(&pdev->dev, "punit BIOS data res: %pR\n", res);
-
-	/* This is index 1 to cover BIOS interface register */
-	res = platform_get_resource(pdev, IORESOURCE_MEM,
-				    PLAT_RESOURCE_BIOS_IFACE_INDEX);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get res of punit BIOS iface\n");
-		return -ENXIO;
-	}
-	punit_res[ipcdev.punit_res_count++] = *res;
-	dev_info(&pdev->dev, "punit BIOS interface res: %pR\n", res);
-
-	/* This is index 2 to cover ISP data register, optional */
-	res = platform_get_resource(pdev, IORESOURCE_MEM,
-				    PLAT_RESOURCE_ISP_DATA_INDEX);
-	if (res) {
-		punit_res[ipcdev.punit_res_count++] = *res;
-		dev_info(&pdev->dev, "punit ISP data res: %pR\n", res);
-	}
-
-	/* This is index 3 to cover ISP interface register, optional */
-	res = platform_get_resource(pdev, IORESOURCE_MEM,
-				    PLAT_RESOURCE_ISP_IFACE_INDEX);
-	if (res) {
-		punit_res[ipcdev.punit_res_count++] = *res;
-		dev_info(&pdev->dev, "punit ISP interface res: %pR\n", res);
-	}
-
-	/* This is index 4 to cover GTD data register, optional */
-	res = platform_get_resource(pdev, IORESOURCE_MEM,
-				    PLAT_RESOURCE_GTD_DATA_INDEX);
-	if (res) {
-		punit_res[ipcdev.punit_res_count++] = *res;
-		dev_info(&pdev->dev, "punit GTD data res: %pR\n", res);
-	}
-
-	/* This is index 5 to cover GTD interface register, optional */
-	res = platform_get_resource(pdev, IORESOURCE_MEM,
-				    PLAT_RESOURCE_GTD_IFACE_INDEX);
-	if (res) {
-		punit_res[ipcdev.punit_res_count++] = *res;
-		dev_info(&pdev->dev, "punit GTD interface res: %pR\n", res);
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM,
-				    PLAT_RESOURCE_IPC_INDEX);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get ipc resource\n");
-		return -ENXIO;
-	}
-	size = PLAT_RESOURCE_IPC_SIZE + PLAT_RESOURCE_GCR_SIZE;
-	res->end = res->start + size - 1;
-
-	addr = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(addr))
-		return PTR_ERR(addr);
-
-	ipcdev.ipc_base = addr;
-
-	ipcdev.gcr_mem_base = addr + PLAT_RESOURCE_GCR_OFFSET;
-	dev_info(&pdev->dev, "ipc res: %pR\n", res);
-
-	ipcdev.telem_res_inval = 0;
-	res = platform_get_resource(pdev, IORESOURCE_MEM,
-				    PLAT_RESOURCE_TELEM_SSRAM_INDEX);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get telemetry ssram resource\n");
-		ipcdev.telem_res_inval = 1;
-	} else {
-		ipcdev.telem_punit_ssram_base = res->start +
-						TELEM_PUNIT_SSRAM_OFFSET;
-		ipcdev.telem_punit_ssram_size = TELEM_SSRAM_SIZE;
-		ipcdev.telem_pmc_ssram_base = res->start +
-						TELEM_PMC_SSRAM_OFFSET;
-		ipcdev.telem_pmc_ssram_size = TELEM_SSRAM_SIZE;
-		dev_info(&pdev->dev, "telemetry ssram res: %pR\n", res);
-	}
-
-	return 0;
-}
-
-/**
- * intel_pmc_s0ix_counter_read() - Read S0ix residency.
- * @data: Out param that contains current S0ix residency count.
- *
- * Return: an error code or 0 on success.
- */
-int intel_pmc_s0ix_counter_read(u64 *data)
-{
-	u64 deep, shlw;
-
-	if (!ipcdev.has_gcr_regs)
-		return -EACCES;
-
-	deep = gcr_data_readq(PMC_GCR_TELEM_DEEP_S0IX_REG);
-	shlw = gcr_data_readq(PMC_GCR_TELEM_SHLW_S0IX_REG);
-
-	*data = S0IX_RESIDENCY_IN_USECS(deep, shlw);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(intel_pmc_s0ix_counter_read);
-
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id ipc_acpi_ids[] = {
-	{ "INT34D2", 0},
-	{ }
-};
-MODULE_DEVICE_TABLE(acpi, ipc_acpi_ids);
-#endif
-
-static int ipc_plat_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ipcdev.dev = &pdev->dev;
-	ipcdev.irq_mode = IPC_TRIGGER_MODE_IRQ;
-	init_completion(&ipcdev.cmd_complete);
-	spin_lock_init(&ipcdev.gcr_lock);
-
-	ipcdev.irq = platform_get_irq(pdev, 0);
-	if (ipcdev.irq < 0)
-		return -EINVAL;
-
-	ret = ipc_plat_get_res(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to request resource\n");
-		return ret;
-	}
-
-	ret = ipc_create_pmc_devices();
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to create pmc devices\n");
-		return ret;
-	}
-
-	if (devm_request_irq(&pdev->dev, ipcdev.irq, ioc, IRQF_NO_SUSPEND,
-			     "intel_pmc_ipc", &ipcdev)) {
-		dev_err(&pdev->dev, "Failed to request irq\n");
-		ret = -EBUSY;
-		goto err_irq;
-	}
-
-	ipcdev.has_gcr_regs = true;
-
-	return 0;
-
-err_irq:
-	platform_device_unregister(ipcdev.tco_dev);
-	platform_device_unregister(ipcdev.punit_dev);
-	platform_device_unregister(ipcdev.telemetry_dev);
-
-	return ret;
-}
-
-static int ipc_plat_remove(struct platform_device *pdev)
-{
-	devm_free_irq(&pdev->dev, ipcdev.irq, &ipcdev);
-	platform_device_unregister(ipcdev.tco_dev);
-	platform_device_unregister(ipcdev.punit_dev);
-	platform_device_unregister(ipcdev.telemetry_dev);
-	ipcdev.dev = NULL;
-	return 0;
-}
-
-static struct platform_driver ipc_plat_driver = {
-	.remove = ipc_plat_remove,
-	.probe = ipc_plat_probe,
-	.driver = {
-		.name = "pmc-ipc-plat",
-		.acpi_match_table = ACPI_PTR(ipc_acpi_ids),
-		.dev_groups = intel_ipc_groups,
-	},
-};
-
-static int __init intel_pmc_ipc_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&ipc_plat_driver);
-	if (ret) {
-		pr_err("Failed to register PMC ipc platform driver\n");
-		return ret;
-	}
-	ret = pci_register_driver(&ipc_pci_driver);
-	if (ret) {
-		pr_err("Failed to register PMC ipc pci driver\n");
-		platform_driver_unregister(&ipc_plat_driver);
-		return ret;
-	}
-	return ret;
-}
-
-static void __exit intel_pmc_ipc_exit(void)
-{
-	pci_unregister_driver(&ipc_pci_driver);
-	platform_driver_unregister(&ipc_plat_driver);
-}
-
-MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
-MODULE_DESCRIPTION("Intel PMC IPC driver");
-MODULE_LICENSE("GPL v2");
-
-/* Some modules are dependent on this, so init earlier */
-fs_initcall(intel_pmc_ipc_init);
-module_exit(intel_pmc_ipc_exit);
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 3d7da5266136..d9cf7f7602b0 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -18,11 +18,10 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/sfi.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
 
-#include <asm/intel-mid.h>
 #include <asm/intel_scu_ipc.h>
 
 /* IPC defines the following message types */
@@ -55,14 +54,14 @@
 #define IPC_IOC	          0x100		/* IPC command register IOC bit */
 
 struct intel_scu_ipc_dev {
-	struct device *dev;
+	struct device dev;
+	struct resource mem;
+	struct module *owner;
+	int irq;
 	void __iomem *ipc_base;
 	struct completion cmd_complete;
-	u8 irq_mode;
 };
 
-static struct intel_scu_ipc_dev  ipcdev; /* Only one for now */
-
 #define IPC_STATUS		0x04
 #define IPC_STATUS_IRQ		BIT(2)
 #define IPC_STATUS_ERR		BIT(1)
@@ -78,8 +77,110 @@ static struct intel_scu_ipc_dev  ipcdev; /* Only one for now */
 /* Timeout in jiffies */
 #define IPC_TIMEOUT		(3 * HZ)
 
+static struct intel_scu_ipc_dev *ipcdev; /* Only one for now */
 static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
 
+static struct class intel_scu_ipc_class = {
+	.name = "intel_scu_ipc",
+	.owner = THIS_MODULE,
+};
+
+/**
+ * intel_scu_ipc_dev_get() - Get SCU IPC instance
+ *
+ * The recommended new API takes SCU IPC instance as parameter and this
+ * function can be called by driver to get the instance. This also makes
+ * sure the driver providing the IPC functionality cannot be unloaded
+ * while the caller has the instance.
+ *
+ * Call intel_scu_ipc_dev_put() to release the instance.
+ *
+ * Returns %NULL if SCU IPC is not currently available.
+ */
+struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void)
+{
+	struct intel_scu_ipc_dev *scu = NULL;
+
+	mutex_lock(&ipclock);
+	if (ipcdev) {
+		get_device(&ipcdev->dev);
+		/*
+		 * Prevent the IPC provider from being unloaded while it
+		 * is being used.
+		 */
+		if (!try_module_get(ipcdev->owner))
+			put_device(&ipcdev->dev);
+		else
+			scu = ipcdev;
+	}
+
+	mutex_unlock(&ipclock);
+	return scu;
+}
+EXPORT_SYMBOL_GPL(intel_scu_ipc_dev_get);
+
+/**
+ * intel_scu_ipc_dev_put() - Put SCU IPC instance
+ * @scu: SCU IPC instance
+ *
+ * This function releases the SCU IPC instance retrieved from
+ * intel_scu_ipc_dev_get() and allows the driver providing IPC to be
+ * unloaded.
+ */
+void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu)
+{
+	if (scu) {
+		module_put(scu->owner);
+		put_device(&scu->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(intel_scu_ipc_dev_put);
+
+struct intel_scu_ipc_devres {
+	struct intel_scu_ipc_dev *scu;
+};
+
+static void devm_intel_scu_ipc_dev_release(struct device *dev, void *res)
+{
+	struct intel_scu_ipc_devres *dr = res;
+	struct intel_scu_ipc_dev *scu = dr->scu;
+
+	intel_scu_ipc_dev_put(scu);
+}
+
+/**
+ * devm_intel_scu_ipc_dev_get() - Allocate managed SCU IPC device
+ * @dev: Device requesting the SCU IPC device
+ *
+ * The recommended new API takes SCU IPC instance as parameter and this
+ * function can be called by driver to get the instance. This also makes
+ * sure the driver providing the IPC functionality cannot be unloaded
+ * while the caller has the instance.
+ *
+ * Returns %NULL if SCU IPC is not currently available.
+ */
+struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev)
+{
+	struct intel_scu_ipc_devres *dr;
+	struct intel_scu_ipc_dev *scu;
+
+	dr = devres_alloc(devm_intel_scu_ipc_dev_release, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return NULL;
+
+	scu = intel_scu_ipc_dev_get();
+	if (!scu) {
+		devres_free(dr);
+		return NULL;
+	}
+
+	dr->scu = scu;
+	devres_add(dev, dr);
+
+	return scu;
+}
+EXPORT_SYMBOL_GPL(devm_intel_scu_ipc_dev_get);
+
 /*
  * Send ipc command
  * Command Register (Write Only):
@@ -143,7 +244,6 @@ static inline int busy_loop(struct intel_scu_ipc_dev *scu)
 		usleep_range(50, 100);
 	} while (time_before(jiffies, end));
 
-	dev_err(scu->dev, "IPC timed out");
 	return -ETIMEDOUT;
 }
 
@@ -152,10 +252,8 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
 {
 	int status;
 
-	if (!wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT)) {
-		dev_err(scu->dev, "IPC timed out\n");
+	if (!wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT))
 		return -ETIMEDOUT;
-	}
 
 	status = ipc_read_status(scu);
 	if (status & IPC_STATUS_ERR)
@@ -166,13 +264,13 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
 
 static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
 {
-	return scu->irq_mode ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
+	return scu->irq > 0 ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
 }
 
 /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
-static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
+static int pwr_reg_rdwr(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
+			u32 count, u32 op, u32 id)
 {
-	struct intel_scu_ipc_dev *scu = &ipcdev;
 	int nc;
 	u32 offset = 0;
 	int err;
@@ -182,8 +280,9 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 	memset(cbuf, 0, sizeof(cbuf));
 
 	mutex_lock(&ipclock);
-
-	if (scu->dev == NULL) {
+	if (!scu)
+		scu = ipcdev;
+	if (!scu) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
@@ -222,7 +321,8 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 }
 
 /**
- * intel_scu_ipc_ioread8		-	read a word via the SCU
+ * intel_scu_ipc_dev_ioread8() - Read a byte via the SCU
+ * @scu: Optional SCU IPC instance
  * @addr: Register on SCU
  * @data: Return pointer for read byte
  *
@@ -231,14 +331,15 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
  *
  * This function may sleep.
  */
-int intel_scu_ipc_ioread8(u16 addr, u8 *data)
+int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr, u8 *data)
 {
-	return pwr_reg_rdwr(&addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
+	return pwr_reg_rdwr(scu, &addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
 }
-EXPORT_SYMBOL(intel_scu_ipc_ioread8);
+EXPORT_SYMBOL(intel_scu_ipc_dev_ioread8);
 
 /**
- * intel_scu_ipc_iowrite8		-	write a byte via the SCU
+ * intel_scu_ipc_dev_iowrite8() - Write a byte via the SCU
+ * @scu: Optional SCU IPC instance
  * @addr: Register on SCU
  * @data: Byte to write
  *
@@ -247,14 +348,15 @@ EXPORT_SYMBOL(intel_scu_ipc_ioread8);
  *
  * This function may sleep.
  */
-int intel_scu_ipc_iowrite8(u16 addr, u8 data)
+int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr, u8 data)
 {
-	return pwr_reg_rdwr(&addr, &data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
+	return pwr_reg_rdwr(scu, &addr, &data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
 }
-EXPORT_SYMBOL(intel_scu_ipc_iowrite8);
+EXPORT_SYMBOL(intel_scu_ipc_dev_iowrite8);
 
 /**
- * intel_scu_ipc_readvv		-	read a set of registers
+ * intel_scu_ipc_dev_readv() - Read a set of registers
+ * @scu: Optional SCU IPC instance
  * @addr: Register list
  * @data: Bytes to return
  * @len: Length of array
@@ -266,14 +368,16 @@ EXPORT_SYMBOL(intel_scu_ipc_iowrite8);
  *
  * This function may sleep.
  */
-int intel_scu_ipc_readv(u16 *addr, u8 *data, int len)
+int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
+			    size_t len)
 {
-	return pwr_reg_rdwr(addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
+	return pwr_reg_rdwr(scu, addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
 }
-EXPORT_SYMBOL(intel_scu_ipc_readv);
+EXPORT_SYMBOL(intel_scu_ipc_dev_readv);
 
 /**
- * intel_scu_ipc_writev		-	write a set of registers
+ * intel_scu_ipc_dev_writev() - Write a set of registers
+ * @scu: Optional SCU IPC instance
  * @addr: Register list
  * @data: Bytes to write
  * @len: Length of array
@@ -285,16 +389,18 @@ EXPORT_SYMBOL(intel_scu_ipc_readv);
  *
  * This function may sleep.
  */
-int intel_scu_ipc_writev(u16 *addr, u8 *data, int len)
+int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
+			     size_t len)
 {
-	return pwr_reg_rdwr(addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
+	return pwr_reg_rdwr(scu, addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
 }
-EXPORT_SYMBOL(intel_scu_ipc_writev);
+EXPORT_SYMBOL(intel_scu_ipc_dev_writev);
 
 /**
- * intel_scu_ipc_update_register	-	r/m/w a register
+ * intel_scu_ipc_dev_update() - Update a register
+ * @scu: Optional SCU IPC instance
  * @addr: Register address
- * @bits: Bits to update
+ * @data: Bits to update
  * @mask: Mask of bits to update
  *
  * Read-modify-write power control unit register. The first data argument
@@ -305,15 +411,17 @@ EXPORT_SYMBOL(intel_scu_ipc_writev);
  * This function may sleep. Locking between SCU accesses is handled
  * for the caller.
  */
-int intel_scu_ipc_update_register(u16 addr, u8 bits, u8 mask)
+int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr, u8 data,
+			     u8 mask)
 {
-	u8 data[2] = { bits, mask };
-	return pwr_reg_rdwr(&addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_M);
+	u8 tmp[2] = { data, mask };
+	return pwr_reg_rdwr(scu, &addr, tmp, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_M);
 }
-EXPORT_SYMBOL(intel_scu_ipc_update_register);
+EXPORT_SYMBOL(intel_scu_ipc_dev_update);
 
 /**
- * intel_scu_ipc_simple_command	-	send a simple command
+ * intel_scu_ipc_dev_simple_command() - Send a simple command
+ * @scu: Optional SCU IPC instance
  * @cmd: Command
  * @sub: Sub type
  *
@@ -324,62 +432,89 @@ EXPORT_SYMBOL(intel_scu_ipc_update_register);
  * This function may sleep. Locking for SCU accesses is handled for the
  * caller.
  */
-int intel_scu_ipc_simple_command(int cmd, int sub)
+int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd,
+				     int sub)
 {
-	struct intel_scu_ipc_dev *scu = &ipcdev;
+	u32 cmdval;
 	int err;
 
 	mutex_lock(&ipclock);
-	if (scu->dev == NULL) {
+	if (!scu)
+		scu = ipcdev;
+	if (!scu) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
-	ipc_command(scu, sub << 12 | cmd);
+	scu = ipcdev;
+	cmdval = sub << 12 | cmd;
+	ipc_command(scu, cmdval);
 	err = intel_scu_ipc_check_status(scu);
 	mutex_unlock(&ipclock);
+	if (err)
+		dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
 	return err;
 }
-EXPORT_SYMBOL(intel_scu_ipc_simple_command);
+EXPORT_SYMBOL(intel_scu_ipc_dev_simple_command);
 
 /**
- * intel_scu_ipc_command	-	command with data
+ * intel_scu_ipc_command_with_size() - Command with data
+ * @scu: Optional SCU IPC instance
  * @cmd: Command
  * @sub: Sub type
  * @in: Input data
- * @inlen: Input length in dwords
+ * @inlen: Input length in bytes
+ * @size: Input size written to the IPC command register in whatever
+ *	  units (dword, byte) the particular firmware requires. Normally
+ *	  should be the same as @inlen.
  * @out: Output data
- * @outlen: Output length in dwords
+ * @outlen: Output length in bytes
  *
  * Issue a command to the SCU which involves data transfers. Do the
  * data copies under the lock but leave it for the caller to interpret.
  */
-int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
-			  u32 *out, int outlen)
+int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd,
+					int sub, const void *in, size_t inlen,
+					size_t size, void *out, size_t outlen)
 {
-	struct intel_scu_ipc_dev *scu = &ipcdev;
+	size_t outbuflen = DIV_ROUND_UP(outlen, sizeof(u32));
+	size_t inbuflen = DIV_ROUND_UP(inlen, sizeof(u32));
+	u32 cmdval, inbuf[4] = {};
 	int i, err;
 
+	if (inbuflen > 4 || outbuflen > 4)
+		return -EINVAL;
+
 	mutex_lock(&ipclock);
-	if (scu->dev == NULL) {
+	if (!scu)
+		scu = ipcdev;
+	if (!scu) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
 
-	for (i = 0; i < inlen; i++)
-		ipc_data_writel(scu, *in++, 4 * i);
+	memcpy(inbuf, in, inlen);
+	for (i = 0; i < inbuflen; i++)
+		ipc_data_writel(scu, inbuf[i], 4 * i);
 
-	ipc_command(scu, (inlen << 16) | (sub << 12) | cmd);
+	cmdval = (size << 16) | (sub << 12) | cmd;
+	ipc_command(scu, cmdval);
 	err = intel_scu_ipc_check_status(scu);
 
 	if (!err) {
-		for (i = 0; i < outlen; i++)
-			*out++ = ipc_data_readl(scu, 4 * i);
+		u32 outbuf[4] = {};
+
+		for (i = 0; i < outbuflen; i++)
+			outbuf[i] = ipc_data_readl(scu, 4 * i);
+
+		memcpy(out, outbuf, outlen);
 	}
 
 	mutex_unlock(&ipclock);
+	if (err)
+		dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
 	return err;
 }
-EXPORT_SYMBOL(intel_scu_ipc_command);
+EXPORT_SYMBOL(intel_scu_ipc_dev_command_with_size);
 
 /*
  * Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1
@@ -399,61 +534,179 @@ static irqreturn_t ioc(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void intel_scu_ipc_release(struct device *dev)
+{
+	struct intel_scu_ipc_dev *scu;
+
+	scu = container_of(dev, struct intel_scu_ipc_dev, dev);
+	if (scu->irq > 0)
+		free_irq(scu->irq, scu);
+	iounmap(scu->ipc_base);
+	release_mem_region(scu->mem.start, resource_size(&scu->mem));
+	kfree(scu);
+}
+
 /**
- *	ipc_probe	-	probe an Intel SCU IPC
- *	@pdev: the PCI device matching
- *	@id: entry in the match table
+ * __intel_scu_ipc_register() - Register SCU IPC device
+ * @parent: Parent device
+ * @scu_data: Data used to configure SCU IPC
+ * @owner: Module registering the SCU IPC device
  *
- *	Enable and install an intel SCU IPC. This appears in the PCI space
- *	but uses some hard coded addresses as well.
+ * Call this function to register SCU IPC mechanism under @parent.
+ * Returns pointer to the new SCU IPC device or ERR_PTR() in case of
+ * failure. The caller may use the returned instance if it needs to do
+ * SCU IPC calls itself.
  */
-static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+struct intel_scu_ipc_dev *
+__intel_scu_ipc_register(struct device *parent,
+			 const struct intel_scu_ipc_data *scu_data,
+			 struct module *owner)
 {
 	int err;
-	struct intel_scu_ipc_dev *scu = &ipcdev;
+	struct intel_scu_ipc_dev *scu;
+	void __iomem *ipc_base;
 
-	if (scu->dev)		/* We support only one SCU */
-		return -EBUSY;
+	mutex_lock(&ipclock);
+	/* We support only one IPC */
+	if (ipcdev) {
+		err = -EBUSY;
+		goto err_unlock;
+	}
 
-	err = pcim_enable_device(pdev);
-	if (err)
-		return err;
+	scu = kzalloc(sizeof(*scu), GFP_KERNEL);
+	if (!scu) {
+		err = -ENOMEM;
+		goto err_unlock;
+	}
 
-	err = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
-	if (err)
-		return err;
+	scu->owner = owner;
+	scu->dev.parent = parent;
+	scu->dev.class = &intel_scu_ipc_class;
+	scu->dev.release = intel_scu_ipc_release;
+	dev_set_name(&scu->dev, "intel_scu_ipc");
+
+	if (!request_mem_region(scu_data->mem.start, resource_size(&scu_data->mem),
+				"intel_scu_ipc")) {
+		err = -EBUSY;
+		goto err_free;
+	}
 
+	ipc_base = ioremap(scu_data->mem.start, resource_size(&scu_data->mem));
+	if (!ipc_base) {
+		err = -ENOMEM;
+		goto err_release;
+	}
+
+	scu->ipc_base = ipc_base;
+	scu->mem = scu_data->mem;
+	scu->irq = scu_data->irq;
 	init_completion(&scu->cmd_complete);
 
-	scu->ipc_base = pcim_iomap_table(pdev)[0];
+	if (scu->irq > 0) {
+		err = request_irq(scu->irq, ioc, 0, "intel_scu_ipc", scu);
+		if (err)
+			goto err_unmap;
+	}
 
-	err = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_scu_ipc",
-			       scu);
-	if (err)
-		return err;
+	/*
+	 * After this point intel_scu_ipc_release() takes care of
+	 * releasing the SCU IPC resources once refcount drops to zero.
+	 */
+	err = device_register(&scu->dev);
+	if (err) {
+		put_device(&scu->dev);
+		goto err_unlock;
+	}
 
 	/* Assign device at last */
-	scu->dev = &pdev->dev;
+	ipcdev = scu;
+	mutex_unlock(&ipclock);
 
-	intel_scu_devices_create();
+	return scu;
 
-	pci_set_drvdata(pdev, scu);
-	return 0;
+err_unmap:
+	iounmap(ipc_base);
+err_release:
+	release_mem_region(scu_data->mem.start, resource_size(&scu_data->mem));
+err_free:
+	kfree(scu);
+err_unlock:
+	mutex_unlock(&ipclock);
+
+	return ERR_PTR(err);
 }
+EXPORT_SYMBOL_GPL(__intel_scu_ipc_register);
 
-static const struct pci_device_id pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, 0x080e) },
-	{ PCI_VDEVICE(INTEL, 0x08ea) },
-	{ PCI_VDEVICE(INTEL, 0x11a0) },
-	{}
-};
+/**
+ * intel_scu_ipc_unregister() - Unregister SCU IPC
+ * @scu: SCU IPC handle
+ *
+ * This unregisters the SCU IPC device and releases the acquired
+ * resources once the refcount goes to zero.
+ */
+void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu)
+{
+	mutex_lock(&ipclock);
+	if (!WARN_ON(!ipcdev)) {
+		ipcdev = NULL;
+		device_unregister(&scu->dev);
+	}
+	mutex_unlock(&ipclock);
+}
+EXPORT_SYMBOL_GPL(intel_scu_ipc_unregister);
 
-static struct pci_driver ipc_driver = {
-	.driver = {
-		.suppress_bind_attrs = true,
-	},
-	.name = "intel_scu_ipc",
-	.id_table = pci_ids,
-	.probe = ipc_probe,
-};
-builtin_pci_driver(ipc_driver);
+static void devm_intel_scu_ipc_unregister(struct device *dev, void *res)
+{
+	struct intel_scu_ipc_devres *dr = res;
+	struct intel_scu_ipc_dev *scu = dr->scu;
+
+	intel_scu_ipc_unregister(scu);
+}
+
+/**
+ * __devm_intel_scu_ipc_register() - Register managed SCU IPC device
+ * @parent: Parent device
+ * @scu_data: Data used to configure SCU IPC
+ * @owner: Module registering the SCU IPC device
+ *
+ * Call this function to register managed SCU IPC mechanism under
+ * @parent. Returns pointer to the new SCU IPC device or ERR_PTR() in
+ * case of failure. The caller may use the returned instance if it needs
+ * to do SCU IPC calls itself.
+ */
+struct intel_scu_ipc_dev *
+__devm_intel_scu_ipc_register(struct device *parent,
+			      const struct intel_scu_ipc_data *scu_data,
+			      struct module *owner)
+{
+	struct intel_scu_ipc_devres *dr;
+	struct intel_scu_ipc_dev *scu;
+
+	dr = devres_alloc(devm_intel_scu_ipc_unregister, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return NULL;
+
+	scu = __intel_scu_ipc_register(parent, scu_data, owner);
+	if (IS_ERR(scu)) {
+		devres_free(dr);
+		return scu;
+	}
+
+	dr->scu = scu;
+	devres_add(parent, dr);
+
+	return scu;
+}
+EXPORT_SYMBOL_GPL(__devm_intel_scu_ipc_register);
+
+static int __init intel_scu_ipc_init(void)
+{
+	return class_register(&intel_scu_ipc_class);
+}
+subsys_initcall(intel_scu_ipc_init);
+
+static void __exit intel_scu_ipc_exit(void)
+{
+	class_unregister(&intel_scu_ipc_class);
+}
+module_exit(intel_scu_ipc_exit);
diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel_scu_ipcutil.c
index 8afe6fa06d7b..b7c10c15a3d6 100644
--- a/drivers/platform/x86/intel_scu_ipcutil.c
+++ b/drivers/platform/x86/intel_scu_ipcutil.c
@@ -22,6 +22,9 @@
 
 static int major;
 
+struct intel_scu_ipc_dev *scu;
+static DEFINE_MUTEX(scu_lock);
+
 /* IOCTL commands */
 #define	INTE_SCU_IPC_REGISTER_READ	0
 #define INTE_SCU_IPC_REGISTER_WRITE	1
@@ -52,12 +55,12 @@ static int scu_reg_access(u32 cmd, struct scu_ipc_data  *data)
 
 	switch (cmd) {
 	case INTE_SCU_IPC_REGISTER_READ:
-		return intel_scu_ipc_readv(data->addr, data->data, count);
+		return intel_scu_ipc_dev_readv(scu, data->addr, data->data, count);
 	case INTE_SCU_IPC_REGISTER_WRITE:
-		return intel_scu_ipc_writev(data->addr, data->data, count);
+		return intel_scu_ipc_dev_writev(scu, data->addr, data->data, count);
 	case INTE_SCU_IPC_REGISTER_UPDATE:
-		return intel_scu_ipc_update_register(data->addr[0],
-						    data->data[0], data->mask);
+		return intel_scu_ipc_dev_update(scu, data->addr[0], data->data[0],
+						data->mask);
 	default:
 		return -ENOTTY;
 	}
@@ -91,8 +94,40 @@ static long scu_ipc_ioctl(struct file *fp, unsigned int cmd,
 	return 0;
 }
 
+static int scu_ipc_open(struct inode *inode, struct file *file)
+{
+	int ret = 0;
+
+	/* Only single open at the time */
+	mutex_lock(&scu_lock);
+	if (scu) {
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	scu = intel_scu_ipc_dev_get();
+	if (!scu)
+		ret = -ENODEV;
+
+unlock:
+	mutex_unlock(&scu_lock);
+	return ret;
+}
+
+static int scu_ipc_release(struct inode *inode, struct file *file)
+{
+	mutex_lock(&scu_lock);
+	intel_scu_ipc_dev_put(scu);
+	scu = NULL;
+	mutex_unlock(&scu_lock);
+
+	return 0;
+}
+
 static const struct file_operations scu_ipc_fops = {
 	.unlocked_ioctl = scu_ipc_ioctl,
+	.open = scu_ipc_open,
+	.release = scu_ipc_release,
 };
 
 static int __init ipc_module_init(void)
diff --git a/drivers/platform/x86/intel_scu_pcidrv.c b/drivers/platform/x86/intel_scu_pcidrv.c
new file mode 100644
index 000000000000..8c5fd8240da9
--- /dev/null
+++ b/drivers/platform/x86/intel_scu_pcidrv.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI driver for the Intel SCU.
+ *
+ * Copyright (C) 2008-2010, 2015, 2020 Intel Corporation
+ * Authors: Sreedhara DS (sreedhara.ds@intel.com)
+ *	    Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/intel-mid.h>
+#include <asm/intel_scu_ipc.h>
+
+static int intel_scu_pci_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *id)
+{
+	void (*setup_fn)(void) = (void (*)(void))id->driver_data;
+	struct intel_scu_ipc_data scu_data = {};
+	struct intel_scu_ipc_dev *scu;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	scu_data.mem = pdev->resource[0];
+	scu_data.irq = pdev->irq;
+
+	scu = intel_scu_ipc_register(&pdev->dev, &scu_data);
+	if (IS_ERR(scu))
+		return PTR_ERR(scu);
+
+	if (setup_fn)
+		setup_fn();
+	return 0;
+}
+
+static void intel_mid_scu_setup(void)
+{
+	intel_scu_devices_create();
+}
+
+static const struct pci_device_id pci_ids[] = {
+	{ PCI_VDEVICE(INTEL, 0x080e),
+	  .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+	{ PCI_VDEVICE(INTEL, 0x08ea),
+	  .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+	{ PCI_VDEVICE(INTEL, 0x0a94) },
+	{ PCI_VDEVICE(INTEL, 0x11a0),
+	  .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+	{ PCI_VDEVICE(INTEL, 0x1a94) },
+	{ PCI_VDEVICE(INTEL, 0x5a94) },
+	{}
+};
+
+static struct pci_driver intel_scu_pci_driver = {
+	.driver = {
+		.suppress_bind_attrs = true,
+	},
+	.name = "intel_scu",
+	.id_table = pci_ids,
+	.probe = intel_scu_pci_probe,
+};
+
+builtin_pci_driver(intel_scu_pci_driver);
diff --git a/drivers/platform/x86/intel_telemetry_core.c b/drivers/platform/x86/intel_telemetry_core.c
index d4040bb222b4..fdf55b5d6948 100644
--- a/drivers/platform/x86/intel_telemetry_core.c
+++ b/drivers/platform/x86/intel_telemetry_core.c
@@ -353,21 +353,16 @@ int telemetry_clear_pltdata(void)
 EXPORT_SYMBOL_GPL(telemetry_clear_pltdata);
 
 /**
- * telemetry_pltconfig_valid() - Checkif platform config is valid
+ * telemetry_get_pltdata() - Return telemetry platform config
  *
- * Usage by other than telemetry module is invalid
- *
- * Return: 0 success, < 0 for failure
+ * May be used by other telemetry modules to get platform specific
+ * configuration.
  */
-int telemetry_pltconfig_valid(void)
+struct telemetry_plt_config *telemetry_get_pltdata(void)
 {
-	if (telm_core_conf.plt_config)
-		return 0;
-
-	else
-		return -EINVAL;
+	return telm_core_conf.plt_config;
 }
-EXPORT_SYMBOL_GPL(telemetry_pltconfig_valid);
+EXPORT_SYMBOL_GPL(telemetry_get_pltdata);
 
 static inline int telemetry_get_pssevtname(enum telemetry_unit telem_unit,
 					   const char **name, int len)
diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel_telemetry_debugfs.c
index 8a53d3b485b3..1d4d0fbfd63c 100644
--- a/drivers/platform/x86/intel_telemetry_debugfs.c
+++ b/drivers/platform/x86/intel_telemetry_debugfs.c
@@ -15,6 +15,7 @@
  */
 #include <linux/debugfs.h>
 #include <linux/device.h>
+#include <linux/mfd/intel_pmc_bxt.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/seq_file.h>
@@ -22,7 +23,6 @@
 
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
-#include <asm/intel_pmc_ipc.h>
 #include <asm/intel_telemetry.h>
 
 #define DRIVER_NAME			"telemetry_soc_debugfs"
@@ -647,10 +647,11 @@ DEFINE_SHOW_ATTRIBUTE(telem_soc_states);
 
 static int telem_s0ix_res_get(void *data, u64 *val)
 {
+	struct telemetry_plt_config *plt_config = telemetry_get_pltdata();
 	u64 s0ix_total_res;
 	int ret;
 
-	ret = intel_pmc_s0ix_counter_read(&s0ix_total_res);
+	ret = intel_pmc_s0ix_counter_read(plt_config->pmc, &s0ix_total_res);
 	if (ret) {
 		pr_err("Failed to read S0ix residency");
 		return ret;
@@ -837,12 +838,15 @@ static int pm_suspend_exit_cb(void)
 	 */
 	if (suspend_shlw_ctr_exit == suspend_shlw_ctr_temp &&
 	    suspend_deep_ctr_exit == suspend_deep_ctr_temp) {
-		ret = intel_pmc_gcr_read64(PMC_GCR_TELEM_SHLW_S0IX_REG,
+		struct telemetry_plt_config *plt_config = telemetry_get_pltdata();
+		struct intel_pmc_dev *pmc = plt_config->pmc;
+
+		ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_SHLW_S0IX_REG,
 					  &suspend_shlw_res_exit);
 		if (ret < 0)
 			goto out;
 
-		ret = intel_pmc_gcr_read64(PMC_GCR_TELEM_DEEP_S0IX_REG,
+		ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_DEEP_S0IX_REG,
 					  &suspend_deep_res_exit);
 		if (ret < 0)
 			goto out;
@@ -910,8 +914,7 @@ static int __init telemetry_debugfs_init(void)
 
 	debugfs_conf = (struct telemetry_debugfs_conf *)id->driver_data;
 
-	err = telemetry_pltconfig_valid();
-	if (err < 0) {
+	if (!telemetry_get_pltdata()) {
 		pr_info("Invalid pltconfig, ensure IPC1 device is enabled in BIOS\n");
 		return -ENODEV;
 	}
diff --git a/drivers/platform/x86/intel_telemetry_pltdrv.c b/drivers/platform/x86/intel_telemetry_pltdrv.c
index 987a24e3344e..405dea87de6b 100644
--- a/drivers/platform/x86/intel_telemetry_pltdrv.c
+++ b/drivers/platform/x86/intel_telemetry_pltdrv.c
@@ -15,7 +15,6 @@
 
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
-#include <asm/intel_pmc_ipc.h>
 #include <asm/intel_punit_ipc.h>
 #include <asm/intel_telemetry.h>
 
@@ -35,6 +34,7 @@
 #define TELEM_SSRAM_STARTTIME_OFFSET	8
 #define TELEM_SSRAM_EVTLOG_OFFSET	16
 
+#define IOSS_TELEM			0xeb
 #define IOSS_TELEM_EVENT_READ		0x0
 #define IOSS_TELEM_EVENT_WRITE		0x1
 #define IOSS_TELEM_INFO_READ		0x2
@@ -42,9 +42,6 @@
 #define IOSS_TELEM_TRACE_CTL_WRITE	0x6
 #define IOSS_TELEM_EVENT_CTL_READ	0x7
 #define IOSS_TELEM_EVENT_CTL_WRITE	0x8
-#define IOSS_TELEM_EVT_CTRL_WRITE_SIZE	0x4
-#define IOSS_TELEM_READ_WORD		0x1
-#define IOSS_TELEM_WRITE_FOURBYTES	0x4
 #define IOSS_TELEM_EVT_WRITE_SIZE	0x3
 
 #define TELEM_INFO_SRAMEVTS_MASK	0xFF00
@@ -250,17 +247,14 @@ static int telemetry_check_evtid(enum telemetry_unit telem_unit,
 static inline int telemetry_plt_config_ioss_event(u32 evt_id, int index)
 {
 	u32 write_buf;
-	int ret;
 
 	write_buf = evt_id | TELEM_EVENT_ENABLE;
 	write_buf <<= BITS_PER_BYTE;
 	write_buf |= index;
 
-	ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
-				    IOSS_TELEM_EVENT_WRITE, (u8 *)&write_buf,
-				    IOSS_TELEM_EVT_WRITE_SIZE, NULL, 0);
-
-	return ret;
+	return intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+					 IOSS_TELEM_EVENT_WRITE, &write_buf,
+					 IOSS_TELEM_EVT_WRITE_SIZE, NULL, 0);
 }
 
 static inline int telemetry_plt_config_pss_event(u32 evt_id, int index)
@@ -278,6 +272,7 @@ static inline int telemetry_plt_config_pss_event(u32 evt_id, int index)
 static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
 					 enum telemetry_action action)
 {
+	struct intel_scu_ipc_dev *scu = telm_conf->scu;
 	u8 num_ioss_evts, ioss_period;
 	int ret, index, idx;
 	u32 *ioss_evtmap;
@@ -288,9 +283,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
 	ioss_evtmap = evtconfig.evtmap;
 
 	/* Get telemetry EVENT CTL */
-	ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+	ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
 				    IOSS_TELEM_EVENT_CTL_READ, NULL, 0,
-				    &telem_ctrl, IOSS_TELEM_READ_WORD);
+				    &telem_ctrl, sizeof(telem_ctrl));
 	if (ret) {
 		pr_err("IOSS TELEM_CTRL Read Failed\n");
 		return ret;
@@ -299,11 +294,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
 	/* Disable Telemetry */
 	TELEM_DISABLE(telem_ctrl);
 
-	ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
-				    IOSS_TELEM_EVENT_CTL_WRITE,
-				    (u8 *)&telem_ctrl,
-				    IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
-				    NULL, 0);
+	ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+				    IOSS_TELEM_EVENT_CTL_WRITE, &telem_ctrl,
+				    sizeof(telem_ctrl), NULL, 0);
 	if (ret) {
 		pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
 		return ret;
@@ -315,10 +308,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
 		/* Clear All Events */
 		TELEM_CLEAR_EVENTS(telem_ctrl);
 
-		ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
 					    IOSS_TELEM_EVENT_CTL_WRITE,
-					    (u8 *)&telem_ctrl,
-					    IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
+					    &telem_ctrl, sizeof(telem_ctrl),
 					    NULL, 0);
 		if (ret) {
 			pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
@@ -344,10 +336,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
 		/* Clear All Events */
 		TELEM_CLEAR_EVENTS(telem_ctrl);
 
-		ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
 					    IOSS_TELEM_EVENT_CTL_WRITE,
-					    (u8 *)&telem_ctrl,
-					    IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
+					    &telem_ctrl, sizeof(telem_ctrl),
 					    NULL, 0);
 		if (ret) {
 			pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
@@ -396,10 +387,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
 	TELEM_ENABLE_PERIODIC(telem_ctrl);
 	telem_ctrl |= ioss_period;
 
-	ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+	ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
 				    IOSS_TELEM_EVENT_CTL_WRITE,
-				    (u8 *)&telem_ctrl,
-				    IOSS_TELEM_EVT_CTRL_WRITE_SIZE, NULL, 0);
+				    &telem_ctrl, sizeof(telem_ctrl), NULL, 0);
 	if (ret) {
 		pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n");
 		return ret;
@@ -586,8 +576,9 @@ static int telemetry_setup(struct platform_device *pdev)
 	u32 read_buf, events, event_regs;
 	int ret;
 
-	ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY, IOSS_TELEM_INFO_READ,
-				    NULL, 0, &read_buf, IOSS_TELEM_READ_WORD);
+	ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+					IOSS_TELEM_INFO_READ, NULL, 0,
+					&read_buf, sizeof(read_buf));
 	if (ret) {
 		dev_err(&pdev->dev, "IOSS TELEM_INFO Read Failed\n");
 		return ret;
@@ -681,6 +672,8 @@ static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period)
 
 	mutex_lock(&(telm_conf->telem_lock));
 	if (ioss_period) {
+		struct intel_scu_ipc_dev *scu = telm_conf->scu;
+
 		if (TELEM_SAMPLE_PERIOD_INVALID(ioss_period)) {
 			pr_err("IOSS Sampling Period Out of Range\n");
 			ret = -EINVAL;
@@ -688,9 +681,9 @@ static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period)
 		}
 
 		/* Get telemetry EVENT CTL */
-		ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
 					    IOSS_TELEM_EVENT_CTL_READ, NULL, 0,
-					    &telem_ctrl, IOSS_TELEM_READ_WORD);
+					    &telem_ctrl, sizeof(telem_ctrl));
 		if (ret) {
 			pr_err("IOSS TELEM_CTRL Read Failed\n");
 			goto out;
@@ -699,11 +692,10 @@ static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period)
 		/* Disable Telemetry */
 		TELEM_DISABLE(telem_ctrl);
 
-		ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
-					    IOSS_TELEM_EVENT_CTL_WRITE,
-					    (u8 *)&telem_ctrl,
-					    IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
-					    NULL, 0);
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+						IOSS_TELEM_EVENT_CTL_WRITE,
+						&telem_ctrl, sizeof(telem_ctrl),
+						NULL, 0);
 		if (ret) {
 			pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
 			goto out;
@@ -715,11 +707,10 @@ static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period)
 		TELEM_ENABLE_PERIODIC(telem_ctrl);
 		telem_ctrl |= ioss_period;
 
-		ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
-					    IOSS_TELEM_EVENT_CTL_WRITE,
-					    (u8 *)&telem_ctrl,
-					    IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
-					    NULL, 0);
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+						IOSS_TELEM_EVENT_CTL_WRITE,
+						&telem_ctrl, sizeof(telem_ctrl),
+						NULL, 0);
 		if (ret) {
 			pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n");
 			goto out;
@@ -1014,9 +1005,9 @@ static int telemetry_plt_get_trace_verbosity(enum telemetry_unit telem_unit,
 		break;
 
 	case TELEM_IOSS:
-		ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
-				IOSS_TELEM_TRACE_CTL_READ, NULL, 0, &temp,
-				IOSS_TELEM_READ_WORD);
+		ret = intel_scu_ipc_dev_command(telm_conf->scu,
+				IOSS_TELEM, IOSS_TELEM_TRACE_CTL_READ,
+				NULL, 0, &temp, sizeof(temp));
 		if (ret) {
 			pr_err("IOSS TRACE_CTL Read Failed\n");
 			goto out;
@@ -1068,9 +1059,9 @@ static int telemetry_plt_set_trace_verbosity(enum telemetry_unit telem_unit,
 		break;
 
 	case TELEM_IOSS:
-		ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
-				IOSS_TELEM_TRACE_CTL_READ, NULL, 0, &temp,
-				IOSS_TELEM_READ_WORD);
+		ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+						IOSS_TELEM_TRACE_CTL_READ,
+						NULL, 0, &temp, sizeof(temp));
 		if (ret) {
 			pr_err("IOSS TRACE_CTL Read Failed\n");
 			goto out;
@@ -1079,9 +1070,9 @@ static int telemetry_plt_set_trace_verbosity(enum telemetry_unit telem_unit,
 		TELEM_CLEAR_VERBOSITY_BITS(temp);
 		TELEM_SET_VERBOSITY_BITS(temp, verbosity);
 
-		ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
-				IOSS_TELEM_TRACE_CTL_WRITE, (u8 *)&temp,
-				IOSS_TELEM_WRITE_FOURBYTES, NULL, 0);
+		ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+						IOSS_TELEM_TRACE_CTL_WRITE,
+						&temp, sizeof(temp), NULL, 0);
 		if (ret) {
 			pr_err("IOSS TRACE_CTL Verbosity Set Failed\n");
 			goto out;
@@ -1124,6 +1115,8 @@ static int telemetry_pltdrv_probe(struct platform_device *pdev)
 
 	telm_conf = (struct telemetry_plt_config *)id->driver_data;
 
+	telm_conf->pmc = dev_get_drvdata(pdev->dev.parent);
+
 	mem = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(mem))
 		return PTR_ERR(mem);
@@ -1136,6 +1129,12 @@ static int telemetry_pltdrv_probe(struct platform_device *pdev)
 
 	telm_conf->ioss_config.regmap = mem;
 
+	telm_conf->scu = devm_intel_scu_ipc_dev_get(&pdev->dev);
+	if (!telm_conf->scu) {
+		ret = -EPROBE_DEFER;
+		goto out;
+	}
+
 	mutex_init(&telm_conf->telem_lock);
 	mutex_init(&telm_conf->telem_trace_lock);
 
diff --git a/drivers/platform/x86/surface3_power.c b/drivers/platform/x86/surface3_power.c
index 946ac2dc08ae..cc4f9cba6856 100644
--- a/drivers/platform/x86/surface3_power.c
+++ b/drivers/platform/x86/surface3_power.c
@@ -522,8 +522,8 @@ static int mshw0011_probe(struct i2c_client *client)
 	strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
 
 	bat0 = i2c_acpi_new_device(dev, 1, &board_info);
-	if (!bat0)
-		return -ENOMEM;
+	if (IS_ERR(bat0))
+		return PTR_ERR(bat0);
 
 	data->bat0 = bat0;
 	i2c_set_clientdata(bat0, data);
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 8eaadbaf8ffa..83b4a83da967 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -318,6 +318,7 @@ static struct {
 	u32 uwb:1;
 	u32 fan_ctrl_status_undef:1;
 	u32 second_fan:1;
+	u32 second_fan_ctl:1;
 	u32 beep_needs_two_args:1;
 	u32 mixer_no_level_control:1;
 	u32 battery_force_primary:1;
@@ -8324,11 +8325,19 @@ static int fan_set_level(int level)
 
 	switch (fan_control_access_mode) {
 	case TPACPI_FAN_WR_ACPI_SFAN:
-		if (level >= 0 && level <= 7) {
-			if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
-				return -EIO;
-		} else
+		if ((level < 0) || (level > 7))
 			return -EINVAL;
+
+		if (tp_features.second_fan_ctl) {
+			if (!fan_select_fan2() ||
+			    !acpi_evalf(sfan_handle, NULL, NULL, "vd", level)) {
+				pr_warn("Couldn't set 2nd fan level, disabling support\n");
+				tp_features.second_fan_ctl = 0;
+			}
+			fan_select_fan1();
+		}
+		if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
+			return -EIO;
 		break;
 
 	case TPACPI_FAN_WR_ACPI_FANS:
@@ -8345,6 +8354,15 @@ static int fan_set_level(int level)
 		else if (level & TP_EC_FAN_AUTO)
 			level |= 4;	/* safety min speed 4 */
 
+		if (tp_features.second_fan_ctl) {
+			if (!fan_select_fan2() ||
+			    !acpi_ec_write(fan_status_offset, level)) {
+				pr_warn("Couldn't set 2nd fan level, disabling support\n");
+				tp_features.second_fan_ctl = 0;
+			}
+			fan_select_fan1();
+
+		}
 		if (!acpi_ec_write(fan_status_offset, level))
 			return -EIO;
 		else
@@ -8763,6 +8781,7 @@ static const struct attribute_group fan_attr_group = {
 
 #define TPACPI_FAN_Q1	0x0001		/* Unitialized HFSP */
 #define TPACPI_FAN_2FAN	0x0002		/* EC 0x31 bit 0 selects fan2 */
+#define TPACPI_FAN_2CTL	0x0004		/* selects fan2 control */
 
 static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1),
@@ -8771,6 +8790,13 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_QEC_IBM('7', '0', TPACPI_FAN_Q1),
 	TPACPI_QEC_LNV('7', 'M', TPACPI_FAN_2FAN),
 	TPACPI_Q_LNV('N', '1', TPACPI_FAN_2FAN),
+	TPACPI_Q_LNV3('N', '1', 'D', TPACPI_FAN_2CTL),	/* P70 */
+	TPACPI_Q_LNV3('N', '1', 'E', TPACPI_FAN_2CTL),	/* P50 */
+	TPACPI_Q_LNV3('N', '1', 'T', TPACPI_FAN_2CTL),	/* P71 */
+	TPACPI_Q_LNV3('N', '1', 'U', TPACPI_FAN_2CTL),	/* P51 */
+	TPACPI_Q_LNV3('N', '2', 'C', TPACPI_FAN_2CTL),	/* P52 / P72 */
+	TPACPI_Q_LNV3('N', '2', 'E', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (1st gen) */
+	TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (2nd gen) */
 };
 
 static int __init fan_init(struct ibm_init_struct *iibm)
@@ -8788,6 +8814,7 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 	fan_watchdog_maxinterval = 0;
 	tp_features.fan_ctrl_status_undef = 0;
 	tp_features.second_fan = 0;
+	tp_features.second_fan_ctl = 0;
 	fan_control_desired_level = 7;
 
 	if (tpacpi_is_ibm()) {
@@ -8812,8 +8839,12 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 				fan_quirk1_setup();
 			if (quirks & TPACPI_FAN_2FAN) {
 				tp_features.second_fan = 1;
-				dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
-					"secondary fan support enabled\n");
+				pr_info("secondary fan support enabled\n");
+			}
+			if (quirks & TPACPI_FAN_2CTL) {
+				tp_features.second_fan = 1;
+				tp_features.second_fan_ctl = 1;
+				pr_info("secondary fan control enabled\n");
 			}
 		} else {
 			pr_err("ThinkPad ACPI EC access misbehaving, fan status and control unavailable\n");
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 6ec8923dec1a..9ac06d8a163c 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -373,6 +373,23 @@ static const struct ts_dmi_data jumper_ezpad_mini3_data = {
 	.properties	= jumper_ezpad_mini3_props,
 };
 
+static const struct property_entry mpman_mpwin895cl_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 3),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 9),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1150),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-mpman-mpwin895cl.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data mpman_mpwin895cl_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= mpman_mpwin895cl_props,
+};
+
 static const struct property_entry myria_my8307_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1720),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
@@ -448,6 +465,24 @@ static const struct ts_dmi_data onda_v820w_32g_data = {
 	.properties	= onda_v820w_32g_props,
 };
 
+static const struct property_entry onda_v891_v5_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1715),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name",
+			      "gsl3676-onda-v891-v5.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data onda_v891_v5_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= onda_v891_v5_props,
+};
+
 static const struct property_entry onda_v891w_v1_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 46),
 	PROPERTY_ENTRY_U32("touchscreen-min-y",  8),
@@ -588,6 +623,22 @@ static const struct ts_dmi_data schneider_sct101ctm_data = {
 	.properties	= schneider_sct101ctm_props,
 };
 
+static const struct property_entry techbite_arc_11_6_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 5),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 7),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1981),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1270),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-techbite-arc-11-6.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data techbite_arc_11_6_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= techbite_arc_11_6_props,
+};
+
 static const struct property_entry teclast_x3_plus_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1500),
@@ -908,6 +959,14 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "FlexBook edge11 - M-FBE11"),
 		},
 	},
+	{
+		/* MP Man MPWIN895CL */
+		.driver_data = (void *)&mpman_mpwin895cl_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MPMAN"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MPWIN8900CL"),
+		},
+	},
 	{
 		/* Myria MY8307 */
 		.driver_data = (void *)&myria_my8307_data,
@@ -940,6 +999,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "V820w DualOS")
 		},
 	},
+	{
+		/* ONDA V891 v5 */
+		.driver_data = (void *)&onda_v891_v5_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ONDA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ONDA Tablet"),
+			DMI_MATCH(DMI_BIOS_VERSION, "ONDA.D869CJABNRBA06"),
+		},
+	},
 	{
 		/* ONDA V891w revision P891WBEBV1B00 aka v1 */
 		.driver_data = (void *)&onda_v891w_v1_data,
@@ -1029,6 +1097,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "SCT101CTM"),
 		},
 	},
+	{
+		/* Techbite Arc 11.6 */
+		.driver_data = (void *)&techbite_arc_11_6_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "mPTech"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "techBite Arc 11.6"),
+			DMI_MATCH(DMI_BOARD_NAME, "G8316_272B"),
+		},
+	},
 	{
 		/* Teclast X3 Plus */
 		.driver_data = (void *)&teclast_x3_plus_data,
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 941739db7199..d88f388a3450 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -111,11 +111,11 @@ static struct platform_driver acpi_wmi_driver = {
 
 static bool find_guid(const char *guid_string, struct wmi_block **out)
 {
-	uuid_le guid_input;
+	guid_t guid_input;
 	struct wmi_block *wblock;
 	struct guid_block *block;
 
-	if (uuid_le_to_bin(guid_string, &guid_input))
+	if (guid_parse(guid_string, &guid_input))
 		return false;
 
 	list_for_each_entry(wblock, &wmi_block_list, list) {
@@ -134,7 +134,7 @@ static const void *find_guid_context(struct wmi_block *wblock,
 				      struct wmi_driver *wdriver)
 {
 	const struct wmi_device_id *id;
-	uuid_le guid_input;
+	guid_t guid_input;
 
 	if (wblock == NULL || wdriver == NULL)
 		return NULL;
@@ -143,7 +143,7 @@ static const void *find_guid_context(struct wmi_block *wblock,
 
 	id = wdriver->id_table;
 	while (*id->guid_string) {
-		if (uuid_le_to_bin(id->guid_string, &guid_input))
+		if (guid_parse(id->guid_string, &guid_input))
 			continue;
 		if (!memcmp(wblock->gblock.guid, &guid_input, 16))
 			return id->context;
@@ -202,7 +202,7 @@ static acpi_status wmi_method_enable(struct wmi_block *wblock, int enable)
 /**
  * set_required_buffer_size - Sets the buffer size needed for performing IOCTL
  * @wdev: A wmi bus device from a driver
- * @instance: Instance index
+ * @length: Required buffer size
  *
  * Allocates memory needed for buffer, stores the buffer size in that memory
  */
@@ -222,8 +222,8 @@ EXPORT_SYMBOL_GPL(set_required_buffer_size);
  * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
  * @instance: Instance index
  * @method_id: Method ID to call
- * &in: Buffer containing input for the method call
- * &out: Empty buffer to return the method results
+ * @in: Buffer containing input for the method call
+ * @out: Empty buffer to return the method results
  *
  * Call an ACPI-WMI method
  */
@@ -244,8 +244,8 @@ EXPORT_SYMBOL_GPL(wmi_evaluate_method);
  * @wdev: A wmi bus device from a driver
  * @instance: Instance index
  * @method_id: Method ID to call
- * &in: Buffer containing input for the method call
- * &out: Empty buffer to return the method results
+ * @in: Buffer containing input for the method call
+ * @out: Empty buffer to return the method results
  *
  * Call an ACPI-WMI method
  */
@@ -364,7 +364,7 @@ static acpi_status __query_block(struct wmi_block *wblock, u8 instance,
  * wmi_query_block - Return contents of a WMI block (deprecated)
  * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
  * @instance: Instance index
- * &out: Empty buffer to return the contents of the data block to
+ * @out: Empty buffer to return the contents of the data block to
  *
  * Return the contents of an ACPI-WMI data block to a buffer
  */
@@ -399,7 +399,7 @@ EXPORT_SYMBOL_GPL(wmidev_block_query);
  * wmi_set_block - Write to a WMI block
  * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
  * @instance: Instance index
- * &in: Buffer containing new values for the data block
+ * @in: Buffer containing new values for the data block
  *
  * Write the contents of the input buffer to an ACPI-WMI data block
  */
@@ -510,6 +510,7 @@ static void wmi_notify_debug(u32 value, void *context)
 
 /**
  * wmi_install_notify_handler - Register handler for WMI events
+ * @guid: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
  * @handler: Function to handle notifications
  * @data: Data to be returned to handler when event is fired
  *
@@ -520,12 +521,12 @@ wmi_notify_handler handler, void *data)
 {
 	struct wmi_block *block;
 	acpi_status status = AE_NOT_EXIST;
-	uuid_le guid_input;
+	guid_t guid_input;
 
 	if (!guid || !handler)
 		return AE_BAD_PARAMETER;
 
-	if (uuid_le_to_bin(guid, &guid_input))
+	if (guid_parse(guid, &guid_input))
 		return AE_BAD_PARAMETER;
 
 	list_for_each_entry(block, &wmi_block_list, list) {
@@ -552,6 +553,7 @@ EXPORT_SYMBOL_GPL(wmi_install_notify_handler);
 
 /**
  * wmi_uninstall_notify_handler - Unregister handler for WMI events
+ * @guid: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
  *
  * Unregister handler for events sent to the ACPI-WMI mapper device.
  */
@@ -559,12 +561,12 @@ acpi_status wmi_remove_notify_handler(const char *guid)
 {
 	struct wmi_block *block;
 	acpi_status status = AE_NOT_EXIST;
-	uuid_le guid_input;
+	guid_t guid_input;
 
 	if (!guid)
 		return AE_BAD_PARAMETER;
 
-	if (uuid_le_to_bin(guid, &guid_input))
+	if (guid_parse(guid, &guid_input))
 		return AE_BAD_PARAMETER;
 
 	list_for_each_entry(block, &wmi_block_list, list) {
@@ -795,9 +797,9 @@ static int wmi_dev_match(struct device *dev, struct device_driver *driver)
 		return 0;
 
 	while (*id->guid_string) {
-		uuid_le driver_guid;
+		guid_t driver_guid;
 
-		if (WARN_ON(uuid_le_to_bin(id->guid_string, &driver_guid)))
+		if (WARN_ON(guid_parse(id->guid_string, &driver_guid)))
 			continue;
 		if (!memcmp(&driver_guid, wblock->gblock.guid, 16))
 			return 1;
@@ -1116,8 +1118,7 @@ static void wmi_free_devices(struct acpi_device *device)
 	}
 }
 
-static bool guid_already_parsed(struct acpi_device *device,
-				const u8 *guid)
+static bool guid_already_parsed(struct acpi_device *device, const u8 *guid)
 {
 	struct wmi_block *wblock;
 
@@ -1327,10 +1328,8 @@ static void acpi_wmi_notify_handler(acpi_handle handle, u32 event,
 		wblock->handler(event, wblock->handler_data);
 	}
 
-	if (debug_event) {
-		pr_info("DEBUG Event GUID: %pUL\n",
-			wblock->gblock.guid);
-	}
+	if (debug_event)
+		pr_info("DEBUG Event GUID: %pUL\n", wblock->gblock.guid);
 
 	acpi_bus_generate_netlink_event(
 		wblock->acpi_device->pnp.device_class,
diff --git a/drivers/platform/x86/xiaomi-wmi.c b/drivers/platform/x86/xiaomi-wmi.c
index 601cbb282f54..54a2546bb93b 100644
--- a/drivers/platform/x86/xiaomi-wmi.c
+++ b/drivers/platform/x86/xiaomi-wmi.c
@@ -23,7 +23,7 @@ struct xiaomi_wmi {
 	unsigned int key_code;
 };
 
-int xiaomi_wmi_probe(struct wmi_device *wdev, const void *context)
+static int xiaomi_wmi_probe(struct wmi_device *wdev, const void *context)
 {
 	struct xiaomi_wmi *data;
 
@@ -48,7 +48,7 @@ int xiaomi_wmi_probe(struct wmi_device *wdev, const void *context)
 	return input_register_device(data->input_dev);
 }
 
-void xiaomi_wmi_notify(struct wmi_device *wdev, union acpi_object *dummy)
+static void xiaomi_wmi_notify(struct wmi_device *wdev, union acpi_object *dummy)
 {
 	struct xiaomi_wmi *data;
 
diff --git a/drivers/pnp/pnpbios/pnpbios.h b/drivers/pnp/pnpbios/pnpbios.h
index 37acb8378f39..2ce739ff9c1a 100644
--- a/drivers/pnp/pnpbios/pnpbios.h
+++ b/drivers/pnp/pnpbios/pnpbios.h
@@ -107,7 +107,7 @@ struct pnp_bios_node {
 	__u32 eisa_id;
 	__u8 type_code[3];
 	__u16 flags;
-	__u8 data[0];
+	__u8 data[];
 };
 #pragma pack()
 
diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
index 22a743a0bf28..4a688741a88a 100644
--- a/drivers/power/reset/qcom-pon.c
+++ b/drivers/power/reset/qcom-pon.c
@@ -34,7 +34,8 @@ static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
 
 	ret = regmap_update_bits(pon->regmap,
 				 pon->baseaddr + PON_SOFT_RB_SPARE,
-				 0xfc, magic << pon->reason_shift);
+				 GENMASK(7, pon->reason_shift),
+				 magic << pon->reason_shift);
 	if (ret < 0)
 		dev_err(pon->dev, "update reboot mode bits failed\n");
 
diff --git a/drivers/power/supply/88pm860x_battery.c b/drivers/power/supply/88pm860x_battery.c
index 5ca047b3f58f..1308f3a185f3 100644
--- a/drivers/power/supply/88pm860x_battery.c
+++ b/drivers/power/supply/88pm860x_battery.c
@@ -919,16 +919,12 @@ static int pm860x_battery_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	info->irq_cc = platform_get_irq(pdev, 0);
-	if (info->irq_cc <= 0) {
-		dev_err(&pdev->dev, "No IRQ resource!\n");
+	if (info->irq_cc <= 0)
 		return -EINVAL;
-	}
 
 	info->irq_batt = platform_get_irq(pdev, 1);
-	if (info->irq_batt <= 0) {
-		dev_err(&pdev->dev, "No IRQ resource!\n");
+	if (info->irq_batt <= 0)
 		return -EINVAL;
-	}
 
 	info->chip = chip;
 	info->i2c =
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index f3424fdce341..d37ec0d03237 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -577,7 +577,7 @@ config CHARGER_BQ24257
 	tristate "TI BQ24250/24251/24257 battery charger driver"
 	depends on I2C
 	depends on GPIOLIB || COMPILE_TEST
-	depends on REGMAP_I2C
+	select REGMAP_I2C
 	help
 	  Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
 	  chargers.
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index b96f90a82ecf..751c4f6c7487 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -2399,7 +2399,7 @@ static void ab8500_fg_reinit_work(struct work_struct *work)
 	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
 		fg_reinit_work.work);
 
-	if (di->flags.calibrate == false) {
+	if (!di->flags.calibrate) {
 		dev_dbg(di->dev, "Resetting FG state machine to init.\n");
 		ab8500_fg_clear_cap_samples(di);
 		ab8500_fg_calc_cap_discharge_voltage(di, true);
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
index cf4c67b2d235..9d981b76c1e7 100644
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -880,10 +880,9 @@ static int axp288_charger_probe(struct platform_device *pdev)
 	/* Register charger interrupts */
 	for (i = 0; i < CHRG_INTR_END; i++) {
 		pirq = platform_get_irq(info->pdev, i);
-		if (pirq < 0) {
-			dev_err(&pdev->dev, "Failed to get IRQ: %d\n", pirq);
+		if (pirq < 0)
 			return pirq;
-		}
+
 		info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
 		if (info->irq[i] < 0) {
 			dev_warn(&info->pdev->dev,
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index f40fa0e63b6e..148eb8105803 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -717,6 +717,12 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "STK1A32SC"),
 		},
 	},
+	{
+		/* Meegopad T02 */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "MEEGOPAD T02"),
+		},
+	},
 	{
 		/* Meegopad T08 */
 		.matches = {
diff --git a/drivers/power/supply/max14656_charger_detector.c b/drivers/power/supply/max14656_charger_detector.c
index 3bbb8b4c8ae7..137f9fafce8c 100644
--- a/drivers/power/supply/max14656_charger_detector.c
+++ b/drivers/power/supply/max14656_charger_detector.c
@@ -139,10 +139,9 @@ static void max14656_irq_worker(struct work_struct *work)
 
 	u8 buf[REG_TOTAL_NUM];
 	u8 chg_type;
-	int ret = 0;
 
-	ret = max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID,
-				      REG_TOTAL_NUM, buf);
+	max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID,
+				REG_TOTAL_NUM, buf);
 
 	if ((buf[MAX14656_STATUS_1] & STATUS1_VB_VALID_MASK) &&
 		(buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK)) {
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index 69ec4295d55d..f284547913d6 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -87,6 +87,7 @@ static enum power_supply_property max17042_battery_props[] = {
 	POWER_SUPPLY_PROP_SCOPE,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
 };
 
 static int max17042_get_temperature(struct max17042_chip *chip, int *temp)
@@ -411,6 +412,13 @@ static int max17042_get_property(struct power_supply *psy,
 			return -EINVAL;
 		}
 		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		ret = regmap_read(map, MAX17042_TTE, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = data * 5625 / 1000;
+		break;
 	default:
 		return -EINVAL;
 	}
diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
index a7c8a8453db1..be42e814ea34 100644
--- a/drivers/power/supply/sc27xx_fuel_gauge.c
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -42,6 +42,8 @@
 #define SC27XX_FGU_USER_AREA_SET	0xa0
 #define SC27XX_FGU_USER_AREA_CLEAR	0xa4
 #define SC27XX_FGU_USER_AREA_STATUS	0xa8
+#define SC27XX_FGU_VOLTAGE_BUF		0xd0
+#define SC27XX_FGU_CURRENT_BUF		0xf0
 
 #define SC27XX_WRITE_SELCLB_EN		BIT(0)
 #define SC27XX_FGU_CLBCNT_MASK		GENMASK(15, 0)
@@ -82,6 +84,7 @@
  * @init_clbcnt: the initial coulomb counter
  * @max_volt: the maximum constant input voltage in millivolt
  * @min_volt: the minimum drained battery voltage in microvolt
+ * @boot_volt: the voltage measured during boot in microvolt
  * @table_len: the capacity table length
  * @resist_table_len: the resistance table length
  * @cur_1000ma_adc: ADC value corresponding to 1000 mA
@@ -107,6 +110,7 @@ struct sc27xx_fgu_data {
 	int init_clbcnt;
 	int max_volt;
 	int min_volt;
+	int boot_volt;
 	int table_len;
 	int resist_table_len;
 	int cur_1000ma_adc;
@@ -319,6 +323,7 @@ static int sc27xx_fgu_get_boot_capacity(struct sc27xx_fgu_data *data, int *cap)
 
 	volt = sc27xx_fgu_adc_to_voltage(data, volt);
 	ocv = volt * 1000 - oci * data->internal_resist;
+	data->boot_volt = ocv;
 
 	/*
 	 * Parse the capacity table to look up the correct capacity percent
@@ -376,6 +381,44 @@ static int sc27xx_fgu_get_clbcnt(struct sc27xx_fgu_data *data, int *clb_cnt)
 	return 0;
 }
 
+static int sc27xx_fgu_get_vol_now(struct sc27xx_fgu_data *data, int *val)
+{
+	int ret;
+	u32 vol;
+
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_VOLTAGE_BUF,
+			  &vol);
+	if (ret)
+		return ret;
+
+	/*
+	 * It is ADC values reading from registers which need to convert to
+	 * corresponding voltage values.
+	 */
+	*val = sc27xx_fgu_adc_to_voltage(data, vol);
+
+	return 0;
+}
+
+static int sc27xx_fgu_get_cur_now(struct sc27xx_fgu_data *data, int *val)
+{
+	int ret;
+	u32 cur;
+
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CURRENT_BUF,
+			  &cur);
+	if (ret)
+		return ret;
+
+	/*
+	 * It is ADC values reading from registers which need to convert to
+	 * corresponding current values.
+	 */
+	*val = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC);
+
+	return 0;
+}
+
 static int sc27xx_fgu_get_capacity(struct sc27xx_fgu_data *data, int *cap)
 {
 	int ret, cur_clbcnt, delta_clbcnt, delta_cap, temp;
@@ -577,7 +620,7 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
 		val->intval = value;
 		break;
 
-	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
 		ret = sc27xx_fgu_get_vbat_vol(data, &value);
 		if (ret)
 			goto error;
@@ -601,7 +644,6 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
 		val->intval = value;
 		break;
 
-	case POWER_SUPPLY_PROP_CURRENT_NOW:
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 		ret = sc27xx_fgu_get_current(data, &value);
 		if (ret)
@@ -625,6 +667,26 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
 
 		break;
 
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = sc27xx_fgu_get_vol_now(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = sc27xx_fgu_get_cur_now(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_BOOT:
+		val->intval = data->boot_volt;
+		break;
+
 	default:
 		ret = -EINVAL;
 		break;
@@ -656,6 +718,11 @@ static int sc27xx_fgu_set_property(struct power_supply *psy,
 		ret = 0;
 		break;
 
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+		data->total_cap = val->intval / 1000;
+		ret = 0;
+		break;
+
 	default:
 		ret = -EINVAL;
 	}
@@ -676,7 +743,8 @@ static int sc27xx_fgu_property_is_writeable(struct power_supply *psy,
 					    enum power_supply_property psp)
 {
 	return psp == POWER_SUPPLY_PROP_CAPACITY ||
-		psp == POWER_SUPPLY_PROP_CALIBRATE;
+		psp == POWER_SUPPLY_PROP_CALIBRATE ||
+		psp == POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
 }
 
 static enum power_supply_property sc27xx_fgu_props[] = {
@@ -688,6 +756,8 @@ static enum power_supply_property sc27xx_fgu_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_VOLTAGE_OCV,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_BOOT,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_CURRENT_AVG,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
@@ -705,6 +775,7 @@ static const struct power_supply_desc sc27xx_fgu_desc = {
 	.set_property		= sc27xx_fgu_set_property,
 	.external_power_changed	= sc27xx_fgu_external_power_changed,
 	.property_is_writeable	= sc27xx_fgu_property_is_writeable,
+	.no_thermal		= true,
 };
 
 static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap)
diff --git a/drivers/power/supply/test_power.c b/drivers/power/supply/test_power.c
index 65c23ef6408d..b3c05ff05783 100644
--- a/drivers/power/supply/test_power.c
+++ b/drivers/power/supply/test_power.c
@@ -16,7 +16,7 @@
 #include <linux/power_supply.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
-#include <linux/vermagic.h>
+#include <generated/utsrelease.h>
 
 enum test_power_id {
 	TEST_AC,
diff --git a/drivers/ptp/ptp_clockmatrix.c b/drivers/ptp/ptp_clockmatrix.c
index 032e112c3dd9..a3f608832660 100644
--- a/drivers/ptp/ptp_clockmatrix.c
+++ b/drivers/ptp/ptp_clockmatrix.c
@@ -780,7 +780,7 @@ static int idtcm_load_firmware(struct idtcm *idtcm,
 
 			/* Page size 128, last 4 bytes of page skipped */
 			if (((loaddr > 0x7b) && (loaddr <= 0x7f))
-			     || ((loaddr > 0xfb) && (loaddr <= 0xff)))
+			     || loaddr > 0xfb)
 				continue;
 
 			err = idtcm_write(idtcm, regaddr, 0, &val, sizeof(val));
diff --git a/drivers/ptp/ptp_idt82p33.c b/drivers/ptp/ptp_idt82p33.c
index b63ac240308b..179f6c472e50 100644
--- a/drivers/ptp/ptp_idt82p33.c
+++ b/drivers/ptp/ptp_idt82p33.c
@@ -23,12 +23,12 @@ MODULE_VERSION("1.0");
 MODULE_LICENSE("GPL");
 
 /* Module Parameters */
-u32 sync_tod_timeout = SYNC_TOD_TIMEOUT_SEC;
+static u32 sync_tod_timeout = SYNC_TOD_TIMEOUT_SEC;
 module_param(sync_tod_timeout, uint, 0);
 MODULE_PARM_DESC(sync_tod_timeout,
 "duration in second to keep SYNC_TOD on (set to 0 to keep it always on)");
 
-u32 phase_snap_threshold = SNAP_THRESHOLD_NS;
+static u32 phase_snap_threshold = SNAP_THRESHOLD_NS;
 module_param(phase_snap_threshold, uint, 0);
 MODULE_PARM_DESC(phase_snap_threshold,
 "threshold (150000ns by default) below which adjtime would ignore");
@@ -881,7 +881,7 @@ static int idt82p33_load_firmware(struct idt82p33 *idt82p33)
 
 			/* Page size 128, last 4 bytes of page skipped */
 			if (((loaddr > 0x7b) && (loaddr <= 0x7f))
-			     || ((loaddr > 0xfb) && (loaddr <= 0xff)))
+			     || loaddr > 0xfb)
 				continue;
 
 			err = idt82p33_write(idt82p33, _ADDR(page, loaddr),
diff --git a/drivers/ptp/ptp_ines.c b/drivers/ptp/ptp_ines.c
index 52d77db39829..7711651ff19e 100644
--- a/drivers/ptp/ptp_ines.c
+++ b/drivers/ptp/ptp_ines.c
@@ -783,16 +783,10 @@ static struct mii_timestamping_ctrl ines_ctrl = {
 static int ines_ptp_ctrl_probe(struct platform_device *pld)
 {
 	struct ines_clock *clock;
-	struct resource *res;
 	void __iomem *addr;
 	int err = 0;
 
-	res = platform_get_resource(pld, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pld->dev, "missing memory resource\n");
-		return -EINVAL;
-	}
-	addr = devm_ioremap_resource(&pld->dev, res);
+	addr = devm_platform_ioremap_resource(pld, 0);
 	if (IS_ERR(addr)) {
 		err = PTR_ERR(addr);
 		goto out;
diff --git a/drivers/ptp/ptp_kvm.c b/drivers/ptp/ptp_kvm.c
index fc7d0b77e118..658d33fc3195 100644
--- a/drivers/ptp/ptp_kvm.c
+++ b/drivers/ptp/ptp_kvm.c
@@ -22,7 +22,7 @@ struct kvm_ptp_clock {
 	struct ptp_clock_info caps;
 };
 
-DEFINE_SPINLOCK(kvm_ptp_lock);
+static DEFINE_SPINLOCK(kvm_ptp_lock);
 
 static struct pvclock_vsyscall_time_info *hv_clock;
 
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index eebbc917ac97..c13d146cdde5 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -232,6 +232,16 @@ config PWM_IMX_TPM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-imx-tpm.
 
+config PWM_IQS620A
+	tristate "Azoteq IQS620A PWM support"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Generic PWM framework driver for the Azoteq IQS620A multi-function
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called pwm-iqs620a.
+
 config PWM_JZ4740
 	tristate "Ingenic JZ47xx PWM support"
 	depends on MACH_INGENIC
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 9a475073dafc..a59c710e98c7 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
 obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
 obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
 obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
+obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
 obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
 obj-$(CONFIG_PWM_LPC18XX_SCT)	+= pwm-lpc18xx-sct.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 9973c442b455..bca04965bfe6 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -537,7 +537,7 @@ static void pwm_apply_state_debug(struct pwm_device *pwm,
 
 	if (!state->enabled && s2.enabled && s2.duty_cycle > 0)
 		dev_warn(chip->dev,
-			 "requested disabled, but yielded enabled with duty > 0");
+			 "requested disabled, but yielded enabled with duty > 0\n");
 
 	/* reapply the state that the driver reported being configured. */
 	err = chip->ops->apply(chip, pwm, &s1);
diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c
new file mode 100644
index 000000000000..674f0e238ba0
--- /dev/null
+++ b/drivers/pwm/pwm-iqs620a.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A PWM Generator
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ *
+ * Limitations:
+ * - The period is fixed to 1 ms and is generated continuously despite changes
+ *   to the duty cycle or enable/disable state.
+ * - Changes to the duty cycle or enable/disable state take effect immediately
+ *   and may result in a glitch during the period in which the change is made.
+ * - The device cannot generate a 0% duty cycle. For duty cycles below 1 / 256
+ *   ms, the output is disabled and relies upon an external pull-down resistor
+ *   to hold the GPIO3/LTX pin low.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define IQS620_PWR_SETTINGS			0xD2
+#define IQS620_PWR_SETTINGS_PWM_OUT		BIT(7)
+
+#define IQS620_PWM_DUTY_CYCLE			0xD8
+
+#define IQS620_PWM_PERIOD_NS			1000000
+
+struct iqs620_pwm_private {
+	struct iqs62x_core *iqs62x;
+	struct pwm_chip chip;
+	struct notifier_block notifier;
+	struct mutex lock;
+	bool out_en;
+	u8 duty_val;
+};
+
+static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+	struct iqs62x_core *iqs62x;
+	int duty_scale, ret;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -ENOTSUPP;
+
+	if (state->period < IQS620_PWM_PERIOD_NS)
+		return -EINVAL;
+
+	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
+	iqs62x = iqs620_pwm->iqs62x;
+
+	/*
+	 * The duty cycle generated by the device is calculated as follows:
+	 *
+	 * duty_cycle = (IQS620_PWM_DUTY_CYCLE + 1) / 256 * 1 ms
+	 *
+	 * ...where IQS620_PWM_DUTY_CYCLE is a register value between 0 and 255
+	 * (inclusive). Therefore the lowest duty cycle the device can generate
+	 * while the output is enabled is 1 / 256 ms.
+	 *
+	 * For lower duty cycles (e.g. 0), the PWM output is simply disabled to
+	 * allow an external pull-down resistor to hold the GPIO3/LTX pin low.
+	 */
+	duty_scale = state->duty_cycle * 256 / IQS620_PWM_PERIOD_NS;
+
+	mutex_lock(&iqs620_pwm->lock);
+
+	if (!state->enabled || !duty_scale) {
+		ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
+					 IQS620_PWR_SETTINGS_PWM_OUT, 0);
+		if (ret)
+			goto err_mutex;
+	}
+
+	if (duty_scale) {
+		u8 duty_val = min(duty_scale - 1, 0xFF);
+
+		ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE,
+				   duty_val);
+		if (ret)
+			goto err_mutex;
+
+		iqs620_pwm->duty_val = duty_val;
+	}
+
+	if (state->enabled && duty_scale) {
+		ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
+					 IQS620_PWR_SETTINGS_PWM_OUT, 0xFF);
+		if (ret)
+			goto err_mutex;
+	}
+
+	iqs620_pwm->out_en = state->enabled;
+
+err_mutex:
+	mutex_unlock(&iqs620_pwm->lock);
+
+	return ret;
+}
+
+static void iqs620_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+
+	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
+
+	mutex_lock(&iqs620_pwm->lock);
+
+	/*
+	 * Since the device cannot generate a 0% duty cycle, requests to do so
+	 * cause subsequent calls to iqs620_pwm_get_state to report the output
+	 * as disabled with duty cycle equal to that which was in use prior to
+	 * the request. This is not ideal, but is the best compromise based on
+	 * the capabilities of the device.
+	 */
+	state->enabled = iqs620_pwm->out_en;
+	state->duty_cycle = DIV_ROUND_UP((iqs620_pwm->duty_val + 1) *
+					 IQS620_PWM_PERIOD_NS, 256);
+
+	mutex_unlock(&iqs620_pwm->lock);
+
+	state->period = IQS620_PWM_PERIOD_NS;
+}
+
+static int iqs620_pwm_notifier(struct notifier_block *notifier,
+			       unsigned long event_flags, void *context)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+	struct iqs62x_core *iqs62x;
+	int ret;
+
+	if (!(event_flags & BIT(IQS62X_EVENT_SYS_RESET)))
+		return NOTIFY_DONE;
+
+	iqs620_pwm = container_of(notifier, struct iqs620_pwm_private,
+				  notifier);
+	iqs62x = iqs620_pwm->iqs62x;
+
+	mutex_lock(&iqs620_pwm->lock);
+
+	/*
+	 * The parent MFD driver already prints an error message in the event
+	 * of a device reset, so nothing else is printed here unless there is
+	 * an additional failure.
+	 */
+	ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE,
+			   iqs620_pwm->duty_val);
+	if (ret)
+		goto err_mutex;
+
+	ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
+				 IQS620_PWR_SETTINGS_PWM_OUT,
+				 iqs620_pwm->out_en ? 0xFF : 0);
+
+err_mutex:
+	mutex_unlock(&iqs620_pwm->lock);
+
+	if (ret) {
+		dev_err(iqs620_pwm->chip.dev,
+			"Failed to re-initialize device: %d\n", ret);
+		return NOTIFY_BAD;
+	}
+
+	return NOTIFY_OK;
+}
+
+static const struct pwm_ops iqs620_pwm_ops = {
+	.apply = iqs620_pwm_apply,
+	.get_state = iqs620_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static void iqs620_pwm_notifier_unregister(void *context)
+{
+	struct iqs620_pwm_private *iqs620_pwm = context;
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs620_pwm->iqs62x->nh,
+						 &iqs620_pwm->notifier);
+	if (ret)
+		dev_err(iqs620_pwm->chip.dev,
+			"Failed to unregister notifier: %d\n", ret);
+}
+
+static int iqs620_pwm_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs620_pwm_private *iqs620_pwm;
+	unsigned int val;
+	int ret;
+
+	iqs620_pwm = devm_kzalloc(&pdev->dev, sizeof(*iqs620_pwm), GFP_KERNEL);
+	if (!iqs620_pwm)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, iqs620_pwm);
+	iqs620_pwm->iqs62x = iqs62x;
+
+	ret = regmap_read(iqs62x->regmap, IQS620_PWR_SETTINGS, &val);
+	if (ret)
+		return ret;
+	iqs620_pwm->out_en = val & IQS620_PWR_SETTINGS_PWM_OUT;
+
+	ret = regmap_read(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE, &val);
+	if (ret)
+		return ret;
+	iqs620_pwm->duty_val = val;
+
+	iqs620_pwm->chip.dev = &pdev->dev;
+	iqs620_pwm->chip.ops = &iqs620_pwm_ops;
+	iqs620_pwm->chip.base = -1;
+	iqs620_pwm->chip.npwm = 1;
+
+	mutex_init(&iqs620_pwm->lock);
+
+	iqs620_pwm->notifier.notifier_call = iqs620_pwm_notifier;
+	ret = blocking_notifier_chain_register(&iqs620_pwm->iqs62x->nh,
+					       &iqs620_pwm->notifier);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       iqs620_pwm_notifier_unregister,
+				       iqs620_pwm);
+	if (ret)
+		return ret;
+
+	ret = pwmchip_add(&iqs620_pwm->chip);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to add device: %d\n", ret);
+
+	return ret;
+}
+
+static int iqs620_pwm_remove(struct platform_device *pdev)
+{
+	struct iqs620_pwm_private *iqs620_pwm = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&iqs620_pwm->chip);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to remove device: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver iqs620_pwm_platform_driver = {
+	.driver = {
+		.name = "iqs620a-pwm",
+	},
+	.probe = iqs620_pwm_probe,
+	.remove = iqs620_pwm_remove,
+};
+module_platform_driver(iqs620_pwm_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A PWM Generator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:iqs620a-pwm");
diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
index 8155f59ece38..40296378e5ee 100644
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -2379,13 +2379,6 @@ static struct mport_dev *mport_cdev_add(struct rio_mport *mport)
 	cdev_init(&md->cdev, &mport_fops);
 	md->cdev.owner = THIS_MODULE;
 
-	ret = cdev_device_add(&md->cdev, &md->dev);
-	if (ret) {
-		rmcd_error("Failed to register mport %d (err=%d)",
-		       mport->id, ret);
-		goto err_cdev;
-	}
-
 	INIT_LIST_HEAD(&md->doorbells);
 	spin_lock_init(&md->db_lock);
 	INIT_LIST_HEAD(&md->portwrites);
@@ -2405,6 +2398,13 @@ static struct mport_dev *mport_cdev_add(struct rio_mport *mport)
 #else
 	md->properties.transfer_mode |= RIO_TRANSFER_MODE_TRANSFER;
 #endif
+
+	ret = cdev_device_add(&md->cdev, &md->dev);
+	if (ret) {
+		rmcd_error("Failed to register mport %d (err=%d)",
+		       mport->id, ret);
+		goto err_cdev;
+	}
 	ret = rio_query_mport(mport, &attr);
 	if (!ret) {
 		md->properties.flags = attr.flags;
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 0e90c5d4bb2b..eb8ed28533f8 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -39,7 +39,7 @@ struct rio_id_table {
 	u16 start;	/* logical minimal id */
 	u32 max;	/* max number of IDs in table */
 	spinlock_t lock;
-	unsigned long table[0];
+	unsigned long table[];
 };
 
 static int next_destid = 0;
diff --git a/drivers/ras/cec.c b/drivers/ras/cec.c
index c09cf55e2d20..569d9ad2c594 100644
--- a/drivers/ras/cec.c
+++ b/drivers/ras/cec.c
@@ -309,7 +309,7 @@ static bool sanity_check(struct ce_array *ca)
 	return ret;
 }
 
-int cec_add_elem(u64 pfn)
+static int cec_add_elem(u64 pfn)
 {
 	struct ce_array *ca = &ce_arr;
 	unsigned int to = 0;
@@ -527,7 +527,33 @@ static int __init create_debugfs_nodes(void)
 	return 1;
 }
 
-void __init cec_init(void)
+static int cec_notifier(struct notifier_block *nb, unsigned long val,
+			void *data)
+{
+	struct mce *m = (struct mce *)data;
+
+	if (!m)
+		return NOTIFY_DONE;
+
+	/* We eat only correctable DRAM errors with usable addresses. */
+	if (mce_is_memory_error(m) &&
+	    mce_is_correctable(m)  &&
+	    mce_usable_address(m)) {
+		if (!cec_add_elem(m->addr >> PAGE_SHIFT)) {
+			m->kflags |= MCE_HANDLED_CEC;
+			return NOTIFY_OK;
+		}
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block cec_nb = {
+	.notifier_call	= cec_notifier,
+	.priority	= MCE_PRIO_CEC,
+};
+
+static void __init cec_init(void)
 {
 	if (ce_arr.disabled)
 		return;
@@ -546,8 +572,11 @@ void __init cec_init(void)
 	INIT_DELAYED_WORK(&cec_work, cec_work_fn);
 	schedule_delayed_work(&cec_work, CEC_DECAY_DEFAULT_INTERVAL);
 
+	mce_register_decode_chain(&cec_nb);
+
 	pr_info("Correctable Errors collector initialized.\n");
 }
+late_initcall(cec_init);
 
 int __init parse_cec_param(char *str)
 {
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f4b72cb098ef..e8f7a0965ae9 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -585,6 +585,16 @@ config REGULATOR_MAX77802
 	  Exynos5420/Exynos5800 SoCs to control various voltages.
 	  It includes support for control of voltage and ramp speed.
 
+config REGULATOR_MAX77826
+	tristate "Maxim 77826 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim 77826 regulator via I2C bus.
+	  The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
+	  It includes support for control of output voltage. This
+	  regulator is found on the Samsung Galaxy S5 (klte) smartphone.
+
 config REGULATOR_MC13XXX_CORE
 	tristate
 
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 6610ee001d9a..e8f163371071 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
 obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
+obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index f60e1b26c2d2..716ca5bb178e 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -139,17 +139,6 @@ static const unsigned int ldo_vintcore_voltages[] = {
 	1350000,
 };
 
-static const unsigned int ldo_sdio_voltages[] = {
-	1160000,
-	1050000,
-	1100000,
-	1500000,
-	1800000,
-	2200000,
-	2910000,
-	3050000,
-};
-
 static const unsigned int fixed_1200000_voltage[] = {
 	1200000,
 };
@@ -166,10 +155,6 @@ static const unsigned int fixed_2050000_voltage[] = {
 	2050000,
 };
 
-static const unsigned int fixed_3300000_voltage[] = {
-	3300000,
-};
-
 static const unsigned int ldo_vana_voltages[] = {
 	1050000,
 	1075000,
@@ -192,13 +177,6 @@ static const unsigned int ldo_vaudio_voltages[] = {
 	2600000,	/* Duplicated in Vaudio and IsoUicc Control register. */
 };
 
-static const unsigned int ldo_vdmic_voltages[] = {
-	1800000,
-	1900000,
-	2000000,
-	2850000,
-};
-
 static DEFINE_MUTEX(shared_mode_mutex);
 static struct ab8500_shared_mode ldo_anamic1_shared;
 static struct ab8500_shared_mode ldo_anamic2_shared;
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index cf3872837abc..f901eee9492d 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -55,10 +55,15 @@ static int bd718xx_buck1234_set_ramp_delay(struct regulator_dev *rdev,
 				  BUCK_RAMPRATE_MASK, ramp_value << 6);
 }
 
-/* Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed.
+/*
+ * On BD71837 (not on BD71847, BD71850, ...)
+ * Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed.
  * Bucks 5 to 8 and LDOs can use PFM and must be disabled when voltage
  * is changed. Hence we return -EBUSY for these if voltage is changed
  * when BUCK/LDO is enabled.
+ *
+ * The LDO operation for BD71847 and BD71850 is icurrently unknown.
+ * It's safer to still assume they can't be changed when enabled.
  */
 static int bd718xx_set_voltage_sel_restricted(struct regulator_dev *rdev,
 						    unsigned int sel)
@@ -88,6 +93,16 @@ static const struct regulator_ops bd718xx_pickable_range_ldo_ops = {
 };
 
 static const struct regulator_ops bd718xx_pickable_range_buck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_pickable_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops bd71837_pickable_range_buck_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -116,6 +131,16 @@ static const struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
 };
 
 static const struct regulator_ops bd718xx_buck_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops bd71837_buck_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -126,6 +151,17 @@ static const struct regulator_ops bd718xx_buck_regulator_ops = {
 };
 
 static const struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_ascend,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops bd71837_buck_regulator_nolinear_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -805,7 +841,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("BUCK5"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_BUCK5,
-			.ops = &bd718xx_pickable_range_buck_ops,
+			.ops = &bd71837_pickable_range_buck_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD71837_BUCK5_VOLTAGE_NUM,
 			.linear_ranges = bd71837_buck5_volts,
@@ -832,7 +868,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("BUCK6"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_BUCK6,
-			.ops = &bd718xx_buck_regulator_ops,
+			.ops = &bd71837_buck_regulator_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD71837_BUCK6_VOLTAGE_NUM,
 			.linear_ranges = bd71837_buck6_volts,
@@ -856,7 +892,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("BUCK7"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_BUCK7,
-			.ops = &bd718xx_buck_regulator_nolinear_ops,
+			.ops = &bd71837_buck_regulator_nolinear_ops,
 			.type = REGULATOR_VOLTAGE,
 			.volt_table = &bd718xx_3rd_nodvs_buck_volts[0],
 			.n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts),
@@ -878,7 +914,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("BUCK8"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_BUCK8,
-			.ops = &bd718xx_buck_regulator_ops,
+			.ops = &bd71837_buck_regulator_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM,
 			.linear_ranges = bd718xx_4th_nodvs_buck_volts,
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index c340505150b6..941783a14b45 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -5496,6 +5496,7 @@ static void regulator_summary_show_subtree(struct seq_file *s,
 		seq_printf(s, "%*s%-*s ",
 			   (level + 1) * 3 + 1, "",
 			   30 - (level + 1) * 3,
+			   consumer->supply_name ? consumer->supply_name :
 			   consumer->dev ? dev_name(consumer->dev) : "deviceless");
 
 		switch (rdev->desc->type) {
@@ -5754,10 +5755,6 @@ static DECLARE_DELAYED_WORK(regulator_init_complete_work,
 
 static int __init regulator_init_complete(void)
 {
-	int delay = driver_deferred_probe_timeout;
-
-	if (delay < 0)
-		delay = 0;
 	/*
 	 * Since DT doesn't provide an idiomatic mechanism for
 	 * enabling full constraints and since it's much more natural
@@ -5768,17 +5765,18 @@ static int __init regulator_init_complete(void)
 		has_full_constraints = true;
 
 	/*
-	 * If driver_deferred_probe_timeout is set, we punt
-	 * completion for that many seconds since systems like
-	 * distros will load many drivers from userspace so consumers
-	 * might not always be ready yet, this is particularly an
-	 * issue with laptops where this might bounce the display off
-	 * then on.  Ideally we'd get a notification from userspace
-	 * when this happens but we don't so just wait a bit and hope
-	 * we waited long enough.  It'd be better if we'd only do
-	 * this on systems that need it.
+	 * We punt completion for an arbitrary amount of time since
+	 * systems like distros will load many drivers from userspace
+	 * so consumers might not always be ready yet, this is
+	 * particularly an issue with laptops where this might bounce
+	 * the display off then on.  Ideally we'd get a notification
+	 * from userspace when this happens but we don't so just wait
+	 * a bit and hope we waited long enough.  It'd be better if
+	 * we'd only do this on systems that need it, and a kernel
+	 * command line option might be useful.
 	 */
-	schedule_delayed_work(&regulator_init_complete_work, delay * HZ);
+	schedule_delayed_work(&regulator_init_complete_work,
+			      msecs_to_jiffies(30000));
 
 	return 0;
 }
diff --git a/drivers/regulator/max77826-regulator.c b/drivers/regulator/max77826-regulator.c
new file mode 100644
index 000000000000..502ab6afc814
--- /dev/null
+++ b/drivers/regulator/max77826-regulator.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// max77826-regulator.c  - regulator driver for Maxim MAX77826
+//
+// Author: Iskren Chernev <iskren.chernev@gmail.com>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+enum max77826_registers {
+	MAX77826_REG_INT_SRC = 0x00,
+	MAX77826_REG_SYS_INT,
+	MAX77826_REG_INT1,
+	MAX77826_REG_INT2,
+	MAX77826_REG_BB_INT,
+	MAX77826_REG_INT_SRC_M,
+	MAX77826_REG_TOPSYS_INT_M,
+	MAX77826_REG_INT1_M,
+	MAX77826_REG_INT2_M,
+	MAX77826_REG_BB_INT_M,
+	MAX77826_REG_TOPSYS_STAT,
+	MAX77826_REG_STAT1,
+	MAX77826_REG_STAT2,
+	MAX77826_REG_BB_STAT,
+	/* 0x0E - 0x0F: Reserved */
+	MAX77826_REG_LDO_OPMD1 = 0x10,
+	MAX77826_REG_LDO_OPMD2,
+	MAX77826_REG_LDO_OPMD3,
+	MAX77826_REG_LDO_OPMD4,
+	MAX77826_REG_B_BB_OPMD,
+	/* 0x15 - 0x1F: Reserved */
+	MAX77826_REG_LDO1_CFG = 0x20,
+	MAX77826_REG_LDO2_CFG,
+	MAX77826_REG_LDO3_CFG,
+	MAX77826_REG_LDO4_CFG,
+	MAX77826_REG_LDO5_CFG,
+	MAX77826_REG_LDO6_CFG,
+	MAX77826_REG_LDO7_CFG,
+	MAX77826_REG_LDO8_CFG,
+	MAX77826_REG_LDO9_CFG,
+	MAX77826_REG_LDO10_CFG,
+	MAX77826_REG_LDO11_CFG,
+	MAX77826_REG_LDO12_CFG,
+	MAX77826_REG_LDO13_CFG,
+	MAX77826_REG_LDO14_CFG,
+	MAX77826_REG_LDO15_CFG,
+	/* 0x2F: Reserved */
+	MAX77826_REG_BUCK_CFG = 0x30,
+	MAX77826_REG_BUCK_VOUT,
+	MAX77826_REG_BB_CFG,
+	MAX77826_REG_BB_VOUT,
+	/* 0x34 - 0x3F: Reserved */
+	MAX77826_REG_BUCK_SS_FREQ = 0x40,
+	MAX77826_REG_UVLO_FALL,
+	/* 0x42 - 0xCE: Reserved */
+	MAX77826_REG_DEVICE_ID = 0xCF,
+};
+
+enum max77826_regulators {
+	MAX77826_LDO1 = 0,
+	MAX77826_LDO2,
+	MAX77826_LDO3,
+	MAX77826_LDO4,
+	MAX77826_LDO5,
+	MAX77826_LDO6,
+	MAX77826_LDO7,
+	MAX77826_LDO8,
+	MAX77826_LDO9,
+	MAX77826_LDO10,
+	MAX77826_LDO11,
+	MAX77826_LDO12,
+	MAX77826_LDO13,
+	MAX77826_LDO14,
+	MAX77826_LDO15,
+	MAX77826_BUCK,
+	MAX77826_BUCKBOOST,
+	MAX77826_MAX_REGULATORS,
+};
+
+#define MAX77826_MASK_LDO		0x7f
+#define MAX77826_MASK_BUCK		0xff
+#define MAX77826_MASK_BUCKBOOST		0x7f
+#define MAX77826_BUCK_RAMP_DELAY	12500
+
+/* values in mV */
+/* for LDO1-3 */
+#define MAX77826_NMOS_LDO_VOLT_MIN	600000
+#define MAX77826_NMOS_LDO_VOLT_MAX	2187500
+#define MAX77826_NMOS_LDO_VOLT_STEP	12500
+
+/* for LDO4-15 */
+#define MAX77826_PMOS_LDO_VOLT_MIN	800000
+#define MAX77826_PMOS_LDO_VOLT_MAX	3975000
+#define MAX77826_PMOS_LDO_VOLT_STEP	25000
+
+/* for BUCK */
+#define MAX77826_BUCK_VOLT_MIN		500000
+#define MAX77826_BUCK_VOLT_MAX		1800000
+#define MAX77826_BUCK_VOLT_STEP		6250
+
+/* for BUCKBOOST */
+#define MAX77826_BUCKBOOST_VOLT_MIN	2600000
+#define MAX77826_BUCKBOOST_VOLT_MAX	4187500
+#define MAX77826_BUCKBOOST_VOLT_STEP	12500
+#define MAX77826_VOLT_RANGE(_type)					\
+	((MAX77826_ ## _type ## _VOLT_MAX -				\
+	  MAX77826_ ## _type ## _VOLT_MIN) /				\
+	 MAX77826_ ## _type ## _VOLT_STEP + 1)
+
+#define MAX77826_LDO(_id, _type)					\
+	[MAX77826_LDO ## _id] = {					\
+		.id = MAX77826_LDO ## _id,				\
+		.name = "LDO"#_id,					\
+		.of_match = of_match_ptr("LDO"#_id),			\
+		.regulators_node = "regulators",			\
+		.ops = &max77826_most_ops,				\
+		.min_uV = MAX77826_ ## _type ## _LDO_VOLT_MIN,		\
+		.uV_step = MAX77826_ ## _type ## _LDO_VOLT_STEP,	\
+		.n_voltages = MAX77826_VOLT_RANGE(_type ## _LDO),	\
+		.enable_reg = MAX77826_REG_LDO_OPMD1 + (_id - 1) / 4,	\
+		.enable_mask = BIT(((_id - 1) % 4) * 2 + 1),		\
+		.vsel_reg = MAX77826_REG_LDO1_CFG + (_id - 1),		\
+		.vsel_mask = MAX77826_MASK_LDO,				\
+		.owner = THIS_MODULE,					\
+	}
+
+#define MAX77826_BUCK(_idx, _id, _ops)					\
+	[MAX77826_ ## _id] = {						\
+		.id = MAX77826_ ## _id,					\
+		.name = #_id,						\
+		.of_match = of_match_ptr(#_id),				\
+		.regulators_node = "regulators",			\
+		.ops = &_ops,						\
+		.min_uV =  MAX77826_ ## _id ## _VOLT_MIN,		\
+		.uV_step = MAX77826_ ## _id ## _VOLT_STEP,		\
+		.n_voltages = MAX77826_VOLT_RANGE(_id),			\
+		.enable_reg = MAX77826_REG_B_BB_OPMD,			\
+		.enable_mask = BIT(_idx * 2 + 1),			\
+		.vsel_reg = MAX77826_REG_BUCK_VOUT + _idx * 2,		\
+		.vsel_mask = MAX77826_MASK_ ## _id,			\
+		.owner = THIS_MODULE,					\
+	}
+
+
+
+struct max77826_regulator_info {
+	struct regmap *regmap;
+	struct regulator_desc *rdesc;
+};
+
+static const struct regmap_config max77826_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX77826_REG_DEVICE_ID,
+};
+
+static int max77826_set_voltage_time_sel(struct regulator_dev *,
+				unsigned int old_selector,
+				unsigned int new_selector);
+
+static const struct regulator_ops max77826_most_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops max77826_buck_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= max77826_set_voltage_time_sel,
+};
+
+static struct regulator_desc max77826_regulators_desc[] = {
+	MAX77826_LDO(1, NMOS),
+	MAX77826_LDO(2, NMOS),
+	MAX77826_LDO(3, NMOS),
+	MAX77826_LDO(4, PMOS),
+	MAX77826_LDO(5, PMOS),
+	MAX77826_LDO(6, PMOS),
+	MAX77826_LDO(7, PMOS),
+	MAX77826_LDO(8, PMOS),
+	MAX77826_LDO(9, PMOS),
+	MAX77826_LDO(10, PMOS),
+	MAX77826_LDO(11, PMOS),
+	MAX77826_LDO(12, PMOS),
+	MAX77826_LDO(13, PMOS),
+	MAX77826_LDO(14, PMOS),
+	MAX77826_LDO(15, PMOS),
+	MAX77826_BUCK(0, BUCK, max77826_buck_ops),
+	MAX77826_BUCK(1, BUCKBOOST, max77826_most_ops),
+};
+
+static int max77826_set_voltage_time_sel(struct regulator_dev *rdev,
+				unsigned int old_selector,
+				unsigned int new_selector)
+{
+	if (new_selector > old_selector) {
+		return DIV_ROUND_UP(MAX77826_BUCK_VOLT_STEP *
+				(new_selector - old_selector),
+				MAX77826_BUCK_RAMP_DELAY);
+	}
+
+	return 0;
+}
+
+static int max77826_read_device_id(struct regmap *regmap, struct device *dev)
+{
+	unsigned int device_id;
+	int res;
+
+	res = regmap_read(regmap, MAX77826_REG_DEVICE_ID, &device_id);
+	if (!res)
+		dev_dbg(dev, "DEVICE_ID: 0x%x\n", device_id);
+
+	return res;
+}
+
+static int max77826_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max77826_regulator_info *info;
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	int i;
+
+	info = devm_kzalloc(dev, sizeof(struct max77826_regulator_info),
+				GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->rdesc = max77826_regulators_desc;
+	regmap = devm_regmap_init_i2c(client, &max77826_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(regmap);
+	}
+
+	info->regmap = regmap;
+	i2c_set_clientdata(client, info);
+
+	config.dev = dev;
+	config.regmap = regmap;
+	config.driver_data = info;
+
+	for (i = 0; i < MAX77826_MAX_REGULATORS; i++) {
+		rdev = devm_regulator_register(dev,
+					       &max77826_regulators_desc[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev, "Failed to register regulator!\n");
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return max77826_read_device_id(regmap, dev);
+}
+
+static const struct of_device_id max77826_of_match[] = {
+	{ .compatible = "maxim,max77826" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max77826_of_match);
+
+static const struct i2c_device_id max77826_id[] = {
+	{ "max77826-regulator" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, max77826_id);
+
+static struct i2c_driver max77826_regulator_driver = {
+	.driver = {
+		.name = "max77826",
+		.of_match_table = of_match_ptr(max77826_of_match),
+	},
+	.probe_new = max77826_i2c_probe,
+	.id_table = max77826_id,
+};
+module_i2c_driver(max77826_regulator_driver);
+
+MODULE_AUTHOR("Iskren Chernev <iskren.chernev@gmail.com>");
+MODULE_DESCRIPTION("MAX77826 PMIC regulator driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index c86ad40015ce..c88cfa8952d6 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -832,11 +832,11 @@ static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
 	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
-	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
 	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
-	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l6-l17"),
-	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
 	{},
 };
@@ -857,7 +857,7 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l4-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l4-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l11"),
-	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo_lv,   "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo_lv,   "vdd-l1-l8"),
 	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index 7fc97f23fcf4..1ee8ec686ed3 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -604,16 +604,6 @@ static const struct qcom_rpm_reg pm8921_smps = {
 	.supports_force_mode_bypass = false,
 };
 
-static const struct qcom_rpm_reg pm8921_ftsmps = {
-	.desc.linear_ranges = ftsmps_ranges,
-	.desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
-	.desc.n_voltages = 101,
-	.desc.ops = &uV_ops,
-	.parts = &rpm8960_smps_parts,
-	.supports_force_mode_auto = true,
-	.supports_force_mode_bypass = false,
-};
-
 static const struct qcom_rpm_reg pm8921_ncp = {
 	.desc.linear_ranges = ncp_ranges,
 	.desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
diff --git a/drivers/regulator/tps80031-regulator.c b/drivers/regulator/tps80031-regulator.c
index 85a6a8ca8c1b..a29e65230132 100644
--- a/drivers/regulator/tps80031-regulator.c
+++ b/drivers/regulator/tps80031-regulator.c
@@ -271,7 +271,7 @@ static int tps80031_vbus_is_enabled(struct regulator_dev *rdev)
 {
 	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
 	struct device *parent = to_tps80031_dev(rdev);
-	int ret = -EIO;
+	int ret;
 	uint8_t ctrl1 = 0;
 	uint8_t ctrl3 = 0;
 
@@ -322,7 +322,7 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev)
 {
 	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
 	struct device *parent = to_tps80031_dev(rdev);
-	int ret = 0;
+	int ret;
 
 	if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
 		ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
@@ -530,7 +530,8 @@ static int tps80031_regulator_config(struct device *parent,
 	case TPS80031_REGULATOR_LDOUSB:
 		if (ri->config_flags & (TPS80031_USBLDO_INPUT_VSYS |
 			TPS80031_USBLDO_INPUT_PMID)) {
-			unsigned val = 0;
+			unsigned val;
+
 			if (ri->config_flags & TPS80031_USBLDO_INPUT_VSYS)
 				val = MISC2_LDOUSB_IN_VSYS;
 			else
diff --git a/drivers/remoteproc/qcom_common.c b/drivers/remoteproc/qcom_common.c
index 60650bcc8c67..9028cea2d81e 100644
--- a/drivers/remoteproc/qcom_common.c
+++ b/drivers/remoteproc/qcom_common.c
@@ -42,12 +42,21 @@ static void glink_subdev_stop(struct rproc_subdev *subdev, bool crashed)
 	glink->edge = NULL;
 }
 
+static void glink_subdev_unprepare(struct rproc_subdev *subdev)
+{
+	struct qcom_rproc_glink *glink = to_glink_subdev(subdev);
+
+	qcom_glink_ssr_notify(glink->ssr_name);
+}
+
 /**
  * qcom_add_glink_subdev() - try to add a GLINK subdevice to rproc
  * @rproc:	rproc handle to parent the subdevice
  * @glink:	reference to a GLINK subdev context
+ * @ssr_name:	identifier of the associated remoteproc for ssr notifications
  */
-void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink)
+void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink,
+			   const char *ssr_name)
 {
 	struct device *dev = &rproc->dev;
 
@@ -55,9 +64,14 @@ void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink)
 	if (!glink->node)
 		return;
 
+	glink->ssr_name = kstrdup_const(ssr_name, GFP_KERNEL);
+	if (!glink->ssr_name)
+		return;
+
 	glink->dev = dev;
 	glink->subdev.start = glink_subdev_start;
 	glink->subdev.stop = glink_subdev_stop;
+	glink->subdev.unprepare = glink_subdev_unprepare;
 
 	rproc_add_subdev(rproc, &glink->subdev);
 }
@@ -74,6 +88,7 @@ void qcom_remove_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glin
 		return;
 
 	rproc_remove_subdev(rproc, &glink->subdev);
+	kfree_const(glink->ssr_name);
 	of_node_put(glink->node);
 }
 EXPORT_SYMBOL_GPL(qcom_remove_glink_subdev);
diff --git a/drivers/remoteproc/qcom_common.h b/drivers/remoteproc/qcom_common.h
index 58de71e4781c..34e5188187dc 100644
--- a/drivers/remoteproc/qcom_common.h
+++ b/drivers/remoteproc/qcom_common.h
@@ -11,6 +11,8 @@ struct qcom_sysmon;
 struct qcom_rproc_glink {
 	struct rproc_subdev subdev;
 
+	const char *ssr_name;
+
 	struct device *dev;
 	struct device_node *node;
 	struct qcom_glink *edge;
@@ -30,7 +32,8 @@ struct qcom_rproc_ssr {
 	const char *name;
 };
 
-void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink);
+void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink,
+			   const char *ssr_name);
 void qcom_remove_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink);
 
 int qcom_register_dump_segments(struct rproc *rproc, const struct firmware *fw);
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 24a3db961d5e..d2a2574dcf35 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -431,6 +431,7 @@ static int adsp_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "unable to allocate remoteproc\n");
 		return -ENOMEM;
 	}
+	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
 
 	adsp = (struct qcom_adsp *)rproc->priv;
 	adsp->dev = &pdev->dev;
@@ -460,7 +461,7 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto disable_pm;
 
-	qcom_add_glink_subdev(rproc, &adsp->glink_subdev);
+	qcom_add_glink_subdev(rproc, &adsp->glink_subdev, desc->ssr_name);
 	qcom_add_ssr_subdev(rproc, &adsp->ssr_subdev, desc->ssr_name);
 	adsp->sysmon = qcom_add_sysmon_subdev(rproc,
 					      desc->sysmon_name,
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 5475d4f808a8..b5dd36775b77 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1357,6 +1357,8 @@ static int qcom_q6v5_register_dump_segments(struct rproc *rproc,
 		return ret;
 	}
 
+	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
+
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 	qproc->dump_complete_mask = 0;
@@ -1667,6 +1669,7 @@ static int q6v5_probe(struct platform_device *pdev)
 	}
 
 	rproc->auto_boot = false;
+	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
 
 	qproc = (struct q6v5 *)rproc->priv;
 	qproc->dev = &pdev->dev;
@@ -1759,7 +1762,7 @@ static int q6v5_probe(struct platform_device *pdev)
 
 	qproc->mpss_perm = BIT(QCOM_SCM_VMID_HLOS);
 	qproc->mba_perm = BIT(QCOM_SCM_VMID_HLOS);
-	qcom_add_glink_subdev(rproc, &qproc->glink_subdev);
+	qcom_add_glink_subdev(rproc, &qproc->glink_subdev, "mpss");
 	qcom_add_smd_subdev(rproc, &qproc->smd_subdev);
 	qcom_add_ssr_subdev(rproc, &qproc->ssr_subdev, "mpss");
 	qcom_add_ipa_notify_subdev(rproc, &qproc->ipa_notify_subdev);
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 7a63efb85405..fc6658b523b6 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -398,6 +398,7 @@ static int adsp_probe(struct platform_device *pdev)
 	}
 
 	rproc->auto_boot = desc->auto_boot;
+	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
 
 	adsp = (struct qcom_adsp *)rproc->priv;
 	adsp->dev = &pdev->dev;
@@ -435,7 +436,7 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto detach_proxy_pds;
 
-	qcom_add_glink_subdev(rproc, &adsp->glink_subdev);
+	qcom_add_glink_subdev(rproc, &adsp->glink_subdev, desc->ssr_name);
 	qcom_add_smd_subdev(rproc, &adsp->smd_subdev);
 	qcom_add_ssr_subdev(rproc, &adsp->ssr_subdev, desc->ssr_name);
 	adsp->sysmon = qcom_add_sysmon_subdev(rproc,
diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
index faf3822d8791..8d8996d714f0 100644
--- a/drivers/remoteproc/qcom_sysmon.c
+++ b/drivers/remoteproc/qcom_sysmon.c
@@ -46,6 +46,25 @@ struct qcom_sysmon {
 	struct sockaddr_qrtr ssctl;
 };
 
+enum {
+	SSCTL_SSR_EVENT_BEFORE_POWERUP,
+	SSCTL_SSR_EVENT_AFTER_POWERUP,
+	SSCTL_SSR_EVENT_BEFORE_SHUTDOWN,
+	SSCTL_SSR_EVENT_AFTER_SHUTDOWN,
+};
+
+static const char * const sysmon_state_string[] = {
+	[SSCTL_SSR_EVENT_BEFORE_POWERUP]	= "before_powerup",
+	[SSCTL_SSR_EVENT_AFTER_POWERUP]		= "after_powerup",
+	[SSCTL_SSR_EVENT_BEFORE_SHUTDOWN]	= "before_shutdown",
+	[SSCTL_SSR_EVENT_AFTER_SHUTDOWN]	= "after_shutdown",
+};
+
+struct sysmon_event {
+	const char *subsys_name;
+	u32 ssr_event;
+};
+
 static DEFINE_MUTEX(sysmon_lock);
 static LIST_HEAD(sysmon_list);
 
@@ -54,13 +73,15 @@ static LIST_HEAD(sysmon_list);
  * @sysmon:	sysmon context
  * @name:	other remote's name
  */
-static void sysmon_send_event(struct qcom_sysmon *sysmon, const char *name)
+static void sysmon_send_event(struct qcom_sysmon *sysmon,
+			      const struct sysmon_event *event)
 {
 	char req[50];
 	int len;
 	int ret;
 
-	len = snprintf(req, sizeof(req), "ssr:%s:before_shutdown", name);
+	len = snprintf(req, sizeof(req), "ssr:%s:%s", event->subsys_name,
+		       sysmon_state_string[event->ssr_event]);
 	if (len >= sizeof(req))
 		return;
 
@@ -148,13 +169,6 @@ static int sysmon_callback(struct rpmsg_device *rpdev, void *data, int count,
 
 #define SSCTL_SUBSYS_NAME_LENGTH	15
 
-enum {
-	SSCTL_SSR_EVENT_BEFORE_POWERUP,
-	SSCTL_SSR_EVENT_AFTER_POWERUP,
-	SSCTL_SSR_EVENT_BEFORE_SHUTDOWN,
-	SSCTL_SSR_EVENT_AFTER_SHUTDOWN,
-};
-
 enum {
 	SSCTL_SSR_EVENT_FORCED,
 	SSCTL_SSR_EVENT_GRACEFUL,
@@ -331,7 +345,8 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
  * @sysmon:	sysmon context
  * @name:	other remote's name
  */
-static void ssctl_send_event(struct qcom_sysmon *sysmon, const char *name)
+static void ssctl_send_event(struct qcom_sysmon *sysmon,
+			     const struct sysmon_event *event)
 {
 	struct ssctl_subsys_event_resp resp;
 	struct ssctl_subsys_event_req req;
@@ -346,9 +361,9 @@ static void ssctl_send_event(struct qcom_sysmon *sysmon, const char *name)
 	}
 
 	memset(&req, 0, sizeof(req));
-	strlcpy(req.subsys_name, name, sizeof(req.subsys_name));
+	strlcpy(req.subsys_name, event->subsys_name, sizeof(req.subsys_name));
 	req.subsys_name_len = strlen(req.subsys_name);
-	req.event = SSCTL_SSR_EVENT_BEFORE_SHUTDOWN;
+	req.event = event->ssr_event;
 	req.evt_driven_valid = true;
 	req.evt_driven = SSCTL_SSR_EVENT_FORCED;
 
@@ -424,16 +439,68 @@ static const struct qmi_ops ssctl_ops = {
 	.del_server = ssctl_del_server,
 };
 
+static int sysmon_prepare(struct rproc_subdev *subdev)
+{
+	struct qcom_sysmon *sysmon = container_of(subdev, struct qcom_sysmon,
+						  subdev);
+	struct sysmon_event event = {
+		.subsys_name = sysmon->name,
+		.ssr_event = SSCTL_SSR_EVENT_BEFORE_POWERUP
+	};
+
+	blocking_notifier_call_chain(&sysmon_notifiers, 0, (void *)&event);
+
+	return 0;
+}
+
+/**
+ * sysmon_start() - start callback for the sysmon remoteproc subdevice
+ * @subdev:	instance of the sysmon subdevice
+ *
+ * Inform all the listners of sysmon notifications that the rproc associated
+ * to @subdev has booted up. The rproc that booted up also needs to know
+ * which rprocs are already up and running, so send start notifications
+ * on behalf of all the online rprocs.
+ */
 static int sysmon_start(struct rproc_subdev *subdev)
 {
+	struct qcom_sysmon *sysmon = container_of(subdev, struct qcom_sysmon,
+						  subdev);
+	struct qcom_sysmon *target;
+	struct sysmon_event event = {
+		.subsys_name = sysmon->name,
+		.ssr_event = SSCTL_SSR_EVENT_AFTER_POWERUP
+	};
+
+	blocking_notifier_call_chain(&sysmon_notifiers, 0, (void *)&event);
+
+	mutex_lock(&sysmon_lock);
+	list_for_each_entry(target, &sysmon_list, node) {
+		if (target == sysmon ||
+		    target->rproc->state != RPROC_RUNNING)
+			continue;
+
+		event.subsys_name = target->name;
+
+		if (sysmon->ssctl_version == 2)
+			ssctl_send_event(sysmon, &event);
+		else if (sysmon->ept)
+			sysmon_send_event(sysmon, &event);
+	}
+	mutex_unlock(&sysmon_lock);
+
 	return 0;
 }
 
 static void sysmon_stop(struct rproc_subdev *subdev, bool crashed)
 {
 	struct qcom_sysmon *sysmon = container_of(subdev, struct qcom_sysmon, subdev);
+	struct sysmon_event event = {
+		.subsys_name = sysmon->name,
+		.ssr_event = SSCTL_SSR_EVENT_BEFORE_SHUTDOWN
+	};
 
-	blocking_notifier_call_chain(&sysmon_notifiers, 0, (void *)sysmon->name);
+	blocking_notifier_call_chain(&sysmon_notifiers, 0, (void *)&event);
 
 	/* Don't request graceful shutdown if we've crashed */
 	if (crashed)
@@ -445,6 +512,18 @@ static void sysmon_stop(struct rproc_subdev *subdev, bool crashed)
 		sysmon_request_shutdown(sysmon);
 }
 
+static void sysmon_unprepare(struct rproc_subdev *subdev)
+{
+	struct qcom_sysmon *sysmon = container_of(subdev, struct qcom_sysmon,
+						  subdev);
+	struct sysmon_event event = {
+		.subsys_name = sysmon->name,
+		.ssr_event = SSCTL_SSR_EVENT_AFTER_SHUTDOWN
+	};
+
+	blocking_notifier_call_chain(&sysmon_notifiers, 0, (void *)&event);
+}
+
 /**
  * sysmon_notify() - notify sysmon target of another's SSR
  * @nb:		notifier_block associated with sysmon instance
@@ -456,19 +535,20 @@ static int sysmon_notify(struct notifier_block *nb, unsigned long event,
 {
 	struct qcom_sysmon *sysmon = container_of(nb, struct qcom_sysmon, nb);
 	struct rproc *rproc = sysmon->rproc;
-	const char *ssr_name = data;
+	struct sysmon_event *sysmon_event = data;
 
 	/* Skip non-running rprocs and the originating instance */
-	if (rproc->state != RPROC_RUNNING || !strcmp(data, sysmon->name)) {
+	if (rproc->state != RPROC_RUNNING ||
+	    !strcmp(sysmon_event->subsys_name, sysmon->name)) {
 		dev_dbg(sysmon->dev, "not notifying %s\n", sysmon->name);
 		return NOTIFY_DONE;
 	}
 
 	/* Only SSCTL version 2 supports SSR events */
 	if (sysmon->ssctl_version == 2)
-		ssctl_send_event(sysmon, ssr_name);
+		ssctl_send_event(sysmon, sysmon_event);
 	else if (sysmon->ept)
-		sysmon_send_event(sysmon, ssr_name);
+		sysmon_send_event(sysmon, sysmon_event);
 
 	return NOTIFY_DONE;
 }
@@ -543,8 +623,10 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 
 	qmi_add_lookup(&sysmon->qmi, 43, 0, 0);
 
+	sysmon->subdev.prepare = sysmon_prepare;
 	sysmon->subdev.start = sysmon_start;
 	sysmon->subdev.stop = sysmon_stop;
+	sysmon->subdev.unprepare = sysmon_unprepare;
 
 	rproc_add_subdev(rproc, &sysmon->subdev);
 
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 0c7afd038f0d..5d65e1a9329a 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -480,6 +480,7 @@ static int wcnss_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "unable to allocate remoteproc\n");
 		return -ENOMEM;
 	}
+	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
 
 	wcnss = (struct qcom_wcnss *)rproc->priv;
 	wcnss->dev = &pdev->dev;
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index e12a54e67588..4bd0f45a00c0 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1394,12 +1394,19 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 		return ret;
 	}
 
+	/* Prepare rproc for firmware loading if needed */
+	ret = rproc_prepare_device(rproc);
+	if (ret) {
+		dev_err(dev, "can't prepare rproc %s: %d\n", rproc->name, ret);
+		goto disable_iommu;
+	}
+
 	rproc->bootaddr = rproc_get_boot_addr(rproc, fw);
 
 	/* Load resource table, core dump segment list etc from the firmware */
 	ret = rproc_parse_fw(rproc, fw);
 	if (ret)
-		goto disable_iommu;
+		goto unprepare_rproc;
 
 	/* reset max_notifyid */
 	rproc->max_notifyid = -1;
@@ -1433,6 +1440,9 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	kfree(rproc->cached_table);
 	rproc->cached_table = NULL;
 	rproc->table_ptr = NULL;
+unprepare_rproc:
+	/* release HW resources if needed */
+	rproc_unprepare_device(rproc);
 disable_iommu:
 	rproc_disable_iommu(rproc);
 	return ret;
@@ -1565,6 +1575,28 @@ int rproc_coredump_add_custom_segment(struct rproc *rproc,
 }
 EXPORT_SYMBOL(rproc_coredump_add_custom_segment);
 
+/**
+ * rproc_coredump_set_elf_info() - set coredump elf information
+ * @rproc:	handle of a remote processor
+ * @class:	elf class for coredump elf file
+ * @machine:	elf machine for coredump elf file
+ *
+ * Set elf information which will be used for coredump elf file.
+ *
+ * Return: 0 on success, negative errno on error.
+ */
+int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
+{
+	if (class != ELFCLASS64 && class != ELFCLASS32)
+		return -EINVAL;
+
+	rproc->elf_class = class;
+	rproc->elf_machine = machine;
+
+	return 0;
+}
+EXPORT_SYMBOL(rproc_coredump_set_elf_info);
+
 /**
  * rproc_coredump() - perform coredump
  * @rproc:	rproc handle
@@ -1587,6 +1619,11 @@ static void rproc_coredump(struct rproc *rproc)
 	if (list_empty(&rproc->dump_segments))
 		return;
 
+	if (class == ELFCLASSNONE) {
+		dev_err(&rproc->dev, "Elf class is not set\n");
+		return;
+	}
+
 	data_size = elf_size_of_hdr(class);
 	list_for_each_entry(segment, &rproc->dump_segments, node) {
 		data_size += elf_size_of_phdr(class) + segment->size;
@@ -1605,7 +1642,7 @@ static void rproc_coredump(struct rproc *rproc)
 	elf_hdr_init_ident(ehdr, class);
 
 	elf_hdr_set_e_type(class, ehdr, ET_CORE);
-	elf_hdr_set_e_machine(class, ehdr, EM_NONE);
+	elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
 	elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
 	elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
 	elf_hdr_set_e_phoff(class, ehdr, elf_size_of_hdr(class));
@@ -1838,6 +1875,9 @@ void rproc_shutdown(struct rproc *rproc)
 	/* clean up all acquired resources */
 	rproc_resource_cleanup(rproc);
 
+	/* release HW resources if needed */
+	rproc_unprepare_device(rproc);
+
 	rproc_disable_iommu(rproc);
 
 	/* Free the copy of the resource table */
@@ -1949,6 +1989,33 @@ int rproc_add(struct rproc *rproc)
 }
 EXPORT_SYMBOL(rproc_add);
 
+static void devm_rproc_remove(void *rproc)
+{
+	rproc_del(rproc);
+}
+
+/**
+ * devm_rproc_add() - resource managed rproc_add()
+ * @dev: the underlying device
+ * @rproc: the remote processor handle to register
+ *
+ * This function performs like rproc_add() but the registered rproc device will
+ * automatically be removed on driver detach.
+ *
+ * Returns: 0 on success, negative errno on failure
+ */
+int devm_rproc_add(struct device *dev, struct rproc *rproc)
+{
+	int err;
+
+	err = rproc_add(rproc);
+	if (err)
+		return err;
+
+	return devm_add_action_or_reset(dev, devm_rproc_remove, rproc);
+}
+EXPORT_SYMBOL(devm_rproc_add);
+
 /**
  * rproc_type_release() - release a remote processor instance
  * @dev: the rproc's device
@@ -1969,7 +2036,8 @@ static void rproc_type_release(struct device *dev)
 	if (rproc->index >= 0)
 		ida_simple_remove(&rproc_dev_index, rproc->index);
 
-	kfree(rproc->firmware);
+	kfree_const(rproc->firmware);
+	kfree_const(rproc->name);
 	kfree(rproc->ops);
 	kfree(rproc);
 }
@@ -1979,6 +2047,47 @@ static const struct device_type rproc_type = {
 	.release	= rproc_type_release,
 };
 
+static int rproc_alloc_firmware(struct rproc *rproc,
+				const char *name, const char *firmware)
+{
+	const char *p;
+
+	/*
+	 * Allocate a firmware name if the caller gave us one to work
+	 * with.  Otherwise construct a new one using a default pattern.
+	 */
+	if (firmware)
+		p = kstrdup_const(firmware, GFP_KERNEL);
+	else
+		p = kasprintf(GFP_KERNEL, "rproc-%s-fw", name);
+
+	if (!p)
+		return -ENOMEM;
+
+	rproc->firmware = p;
+
+	return 0;
+}
+
+static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops)
+{
+	rproc->ops = kmemdup(ops, sizeof(*ops), GFP_KERNEL);
+	if (!rproc->ops)
+		return -ENOMEM;
+
+	if (rproc->ops->load)
+		return 0;
+
+	/* Default to ELF loader if no load function is specified */
+	rproc->ops->load = rproc_elf_load_segments;
+	rproc->ops->parse_fw = rproc_elf_load_rsc_table;
+	rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
+	rproc->ops->sanity_check = rproc_elf_sanity_check;
+	rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
+
+	return 0;
+}
+
 /**
  * rproc_alloc() - allocate a remote processor handle
  * @dev: the underlying device
@@ -2007,79 +2116,49 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 			  const char *firmware, int len)
 {
 	struct rproc *rproc;
-	char *p, *template = "rproc-%s-fw";
-	int name_len;
 
 	if (!dev || !name || !ops)
 		return NULL;
 
-	if (!firmware) {
-		/*
-		 * If the caller didn't pass in a firmware name then
-		 * construct a default name.
-		 */
-		name_len = strlen(name) + strlen(template) - 2 + 1;
-		p = kmalloc(name_len, GFP_KERNEL);
-		if (!p)
-			return NULL;
-		snprintf(p, name_len, template, name);
-	} else {
-		p = kstrdup(firmware, GFP_KERNEL);
-		if (!p)
-			return NULL;
-	}
-
 	rproc = kzalloc(sizeof(struct rproc) + len, GFP_KERNEL);
-	if (!rproc) {
-		kfree(p);
-		return NULL;
-	}
-
-	rproc->ops = kmemdup(ops, sizeof(*ops), GFP_KERNEL);
-	if (!rproc->ops) {
-		kfree(p);
-		kfree(rproc);
+	if (!rproc)
 		return NULL;
-	}
 
-	rproc->firmware = p;
-	rproc->name = name;
 	rproc->priv = &rproc[1];
 	rproc->auto_boot = true;
-	rproc->elf_class = ELFCLASS32;
+	rproc->elf_class = ELFCLASSNONE;
+	rproc->elf_machine = EM_NONE;
 
 	device_initialize(&rproc->dev);
 	rproc->dev.parent = dev;
 	rproc->dev.type = &rproc_type;
 	rproc->dev.class = &rproc_class;
 	rproc->dev.driver_data = rproc;
+	idr_init(&rproc->notifyids);
+
+	rproc->name = kstrdup_const(name, GFP_KERNEL);
+	if (!rproc->name)
+		goto put_device;
+
+	if (rproc_alloc_firmware(rproc, name, firmware))
+		goto put_device;
+
+	if (rproc_alloc_ops(rproc, ops))
+		goto put_device;
 
 	/* Assign a unique device index and name */
 	rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL);
 	if (rproc->index < 0) {
 		dev_err(dev, "ida_simple_get failed: %d\n", rproc->index);
-		put_device(&rproc->dev);
-		return NULL;
+		goto put_device;
 	}
 
 	dev_set_name(&rproc->dev, "remoteproc%d", rproc->index);
 
 	atomic_set(&rproc->power, 0);
 
-	/* Default to ELF loader if no load function is specified */
-	if (!rproc->ops->load) {
-		rproc->ops->load = rproc_elf_load_segments;
-		rproc->ops->parse_fw = rproc_elf_load_rsc_table;
-		rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
-		if (!rproc->ops->sanity_check)
-			rproc->ops->sanity_check = rproc_elf32_sanity_check;
-		rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
-	}
-
 	mutex_init(&rproc->lock);
 
-	idr_init(&rproc->notifyids);
-
 	INIT_LIST_HEAD(&rproc->carveouts);
 	INIT_LIST_HEAD(&rproc->mappings);
 	INIT_LIST_HEAD(&rproc->traces);
@@ -2092,6 +2171,10 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 	rproc->state = RPROC_OFFLINE;
 
 	return rproc;
+
+put_device:
+	put_device(&rproc->dev);
+	return NULL;
 }
 EXPORT_SYMBOL(rproc_alloc);
 
@@ -2171,6 +2254,46 @@ int rproc_del(struct rproc *rproc)
 }
 EXPORT_SYMBOL(rproc_del);
 
+static void devm_rproc_free(struct device *dev, void *res)
+{
+	rproc_free(*(struct rproc **)res);
+}
+
+/**
+ * devm_rproc_alloc() - resource managed rproc_alloc()
+ * @dev: the underlying device
+ * @name: name of this remote processor
+ * @ops: platform-specific handlers (mainly start/stop)
+ * @firmware: name of firmware file to load, can be NULL
+ * @len: length of private data needed by the rproc driver (in bytes)
+ *
+ * This function performs like rproc_alloc() but the acquired rproc device will
+ * automatically be released on driver detach.
+ *
+ * Returns: new rproc instance, or NULL on failure
+ */
+struct rproc *devm_rproc_alloc(struct device *dev, const char *name,
+			       const struct rproc_ops *ops,
+			       const char *firmware, int len)
+{
+	struct rproc **ptr, *rproc;
+
+	ptr = devres_alloc(devm_rproc_free, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	rproc = rproc_alloc(dev, name, ops, firmware, len);
+	if (rproc) {
+		*ptr = rproc;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return rproc;
+}
+EXPORT_SYMBOL(devm_rproc_alloc);
+
 /**
  * rproc_add_subdev() - add a subdevice to a remoteproc
  * @rproc: rproc handle to add the subdevice to
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index d734cadb16e3..732770e92b99 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -269,17 +269,7 @@ static int rproc_rsc_table_show(struct seq_file *seq, void *p)
 	return 0;
 }
 
-static int rproc_rsc_table_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, rproc_rsc_table_show, inode->i_private);
-}
-
-static const struct file_operations rproc_rsc_table_ops = {
-	.open		= rproc_rsc_table_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(rproc_rsc_table);
 
 /* Expose carveout content via debugfs */
 static int rproc_carveouts_show(struct seq_file *seq, void *p)
@@ -299,17 +289,7 @@ static int rproc_carveouts_show(struct seq_file *seq, void *p)
 	return 0;
 }
 
-static int rproc_carveouts_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, rproc_carveouts_show, inode->i_private);
-}
-
-static const struct file_operations rproc_carveouts_ops = {
-	.open		= rproc_carveouts_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(rproc_carveouts);
 
 void rproc_remove_trace_file(struct dentry *tfile)
 {
@@ -354,9 +334,9 @@ void rproc_create_debug_dir(struct rproc *rproc)
 	debugfs_create_file("crash", 0200, rproc->dbg_dir,
 			    rproc, &rproc_crash_ops);
 	debugfs_create_file("resource_table", 0400, rproc->dbg_dir,
-			    rproc, &rproc_rsc_table_ops);
+			    rproc, &rproc_rsc_table_fops);
 	debugfs_create_file("carveout_memories", 0400, rproc->dbg_dir,
-			    rproc, &rproc_carveouts_ops);
+			    rproc, &rproc_carveouts_fops);
 }
 
 void __init rproc_init_debugfs(void)
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index 16e2c496fd45..df68d87752e4 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -112,27 +112,6 @@ int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw)
 }
 EXPORT_SYMBOL(rproc_elf_sanity_check);
 
-/**
- * rproc_elf_sanity_check() - Sanity Check ELF32 firmware image
- * @rproc: the remote processor handle
- * @fw: the ELF32 firmware image
- *
- * Make sure this fw image is sane.
- */
-int rproc_elf32_sanity_check(struct rproc *rproc, const struct firmware *fw)
-{
-	int ret = rproc_elf_sanity_check(rproc, fw);
-
-	if (ret)
-		return ret;
-
-	if (fw_elf_get_class(fw) == ELFCLASS32)
-		return 0;
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(rproc_elf32_sanity_check);
-
 /**
  * rproc_elf_get_boot_addr() - Get rproc's boot address.
  * @rproc: the remote processor handle
@@ -248,9 +227,6 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
 			memset(ptr + filesz, 0, memsz - filesz);
 	}
 
-	if (ret == 0)
-		rproc->elf_class = class;
-
 	return ret;
 }
 EXPORT_SYMBOL(rproc_elf_load_segments);
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index b389dc79da81..4ba7cb59d3e8 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -54,7 +54,6 @@ void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len);
 phys_addr_t rproc_va_to_pa(void *cpu_addr);
 int rproc_trigger_recovery(struct rproc *rproc);
 
-int rproc_elf32_sanity_check(struct rproc *rproc, const struct firmware *fw);
 int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
 u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
 int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
@@ -64,6 +63,22 @@ struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
 struct rproc_mem_entry *
 rproc_find_carveout_by_name(struct rproc *rproc, const char *name, ...);
 
+static inline int rproc_prepare_device(struct rproc *rproc)
+{
+	if (rproc->ops->prepare)
+		return rproc->ops->prepare(rproc);
+
+	return 0;
+}
+
+static inline int rproc_unprepare_device(struct rproc *rproc)
+{
+	if (rproc->ops->unprepare)
+		return rproc->ops->unprepare(rproc);
+
+	return 0;
+}
+
 static inline
 int rproc_fw_sanity_check(struct rproc *rproc, const struct firmware *fw)
 {
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index e61d738d9b47..15ec5fc65257 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -337,8 +337,7 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
 
 	if (rproc->ops->kick == NULL) {
 		ret = -EINVAL;
-		dev_err(dev, ".kick method not defined for %s",
-				rproc->name);
+		dev_err(dev, ".kick method not defined for %s\n", rproc->name);
 		goto out;
 	}
 
diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
index a6cbfa452764..a3268d95a50e 100644
--- a/drivers/remoteproc/st_remoteproc.c
+++ b/drivers/remoteproc/st_remoteproc.c
@@ -233,7 +233,7 @@ static const struct rproc_ops st_rproc_ops = {
 	.parse_fw		= st_rproc_parse_fw,
 	.load			= rproc_elf_load_segments,
 	.find_loaded_rsc_table	= rproc_elf_find_loaded_rsc_table,
-	.sanity_check		= rproc_elf32_sanity_check,
+	.sanity_check		= rproc_elf_sanity_check,
 	.get_boot_addr		= rproc_elf_get_boot_addr,
 };
 
diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
index 3cca8b65a8db..09bcb4d8b9e0 100644
--- a/drivers/remoteproc/st_slim_rproc.c
+++ b/drivers/remoteproc/st_slim_rproc.c
@@ -203,7 +203,7 @@ static const struct rproc_ops slim_rproc_ops = {
 	.da_to_va       = slim_rproc_da_to_va,
 	.get_boot_addr	= rproc_elf_get_boot_addr,
 	.load		= rproc_elf_load_segments,
-	.sanity_check	= rproc_elf32_sanity_check,
+	.sanity_check	= rproc_elf_sanity_check,
 };
 
 /**
diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index 0bdd56f02f18..062797a447c6 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -506,7 +506,7 @@ static struct rproc_ops st_rproc_ops = {
 	.load		= rproc_elf_load_segments,
 	.parse_fw	= stm32_rproc_parse_fw,
 	.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
-	.sanity_check	= rproc_elf32_sanity_check,
+	.sanity_check	= rproc_elf_sanity_check,
 	.get_boot_addr	= rproc_elf_get_boot_addr,
 };
 
@@ -626,6 +626,7 @@ static int stm32_rproc_probe(struct platform_device *pdev)
 	if (!rproc)
 		return -ENOMEM;
 
+	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
 	rproc->has_iommu = false;
 	ddata = rproc->priv;
 	ddata->workqueue = create_workqueue(dev_name(dev));
diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c
index 24e6d420b26b..19926506d033 100644
--- a/drivers/reset/hisilicon/hi6220_reset.c
+++ b/drivers/reset/hisilicon/hi6220_reset.c
@@ -33,6 +33,7 @@
 enum hi6220_reset_ctrl_type {
 	PERIPHERAL,
 	MEDIA,
+	AO,
 };
 
 struct hi6220_reset_data {
@@ -92,6 +93,65 @@ static const struct reset_control_ops hi6220_media_reset_ops = {
 	.deassert = hi6220_media_deassert,
 };
 
+#define AO_SCTRL_SC_PW_CLKEN0     0x800
+#define AO_SCTRL_SC_PW_CLKDIS0    0x804
+
+#define AO_SCTRL_SC_PW_RSTEN0     0x810
+#define AO_SCTRL_SC_PW_RSTDIS0    0x814
+
+#define AO_SCTRL_SC_PW_ISOEN0     0x820
+#define AO_SCTRL_SC_PW_ISODIS0    0x824
+#define AO_MAX_INDEX              12
+
+static int hi6220_ao_assert(struct reset_controller_dev *rc_dev,
+			       unsigned long idx)
+{
+	struct hi6220_reset_data *data = to_reset_data(rc_dev);
+	struct regmap *regmap = data->regmap;
+	int ret;
+
+	ret = regmap_write(regmap, AO_SCTRL_SC_PW_RSTEN0, BIT(idx));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, AO_SCTRL_SC_PW_ISOEN0, BIT(idx));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, AO_SCTRL_SC_PW_CLKDIS0, BIT(idx));
+	return ret;
+}
+
+static int hi6220_ao_deassert(struct reset_controller_dev *rc_dev,
+				 unsigned long idx)
+{
+	struct hi6220_reset_data *data = to_reset_data(rc_dev);
+	struct regmap *regmap = data->regmap;
+	int ret;
+
+	/*
+	 * It was suggested to disable isolation before enabling
+	 * the clocks and deasserting reset, to avoid glitches.
+	 * But this order is preserved to keep it matching the
+	 * vendor code.
+	 */
+	ret = regmap_write(regmap, AO_SCTRL_SC_PW_RSTDIS0, BIT(idx));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, AO_SCTRL_SC_PW_ISODIS0, BIT(idx));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, AO_SCTRL_SC_PW_CLKEN0, BIT(idx));
+	return ret;
+}
+
+static const struct reset_control_ops hi6220_ao_reset_ops = {
+	.assert = hi6220_ao_assert,
+	.deassert = hi6220_ao_deassert,
+};
+
 static int hi6220_reset_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -117,9 +177,12 @@ static int hi6220_reset_probe(struct platform_device *pdev)
 	if (type == MEDIA) {
 		data->rc_dev.ops = &hi6220_media_reset_ops;
 		data->rc_dev.nr_resets = MEDIA_MAX_INDEX;
-	} else {
+	} else if (type == PERIPHERAL) {
 		data->rc_dev.ops = &hi6220_peripheral_reset_ops;
 		data->rc_dev.nr_resets = PERIPH_MAX_INDEX;
+	} else {
+		data->rc_dev.ops = &hi6220_ao_reset_ops;
+		data->rc_dev.nr_resets = AO_MAX_INDEX;
 	}
 
 	return reset_controller_register(&data->rc_dev);
@@ -134,6 +197,10 @@ static const struct of_device_id hi6220_reset_match[] = {
 		.compatible = "hisilicon,hi6220-mediactrl",
 		.data = (void *)MEDIA,
 	},
+	{
+		.compatible = "hisilicon,hi6220-aoctrl",
+		.data = (void *)AO,
+	},
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, hi6220_reset_match);
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index 1443a55a0c29..d170fe663210 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -15,6 +15,7 @@
 #include <linux/regmap.h>
 #include <dt-bindings/reset/imx7-reset.h>
 #include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/reset/imx8mp-reset.h>
 
 struct imx7_src_signal {
 	unsigned int offset, bit;
@@ -145,6 +146,18 @@ enum imx8mq_src_registers {
 	SRC_DDRC2_RCR		= 0x1004,
 };
 
+enum imx8mp_src_registers {
+	SRC_SUPERMIX_RCR	= 0x0018,
+	SRC_AUDIOMIX_RCR	= 0x001c,
+	SRC_MLMIX_RCR		= 0x0028,
+	SRC_GPU2D_RCR		= 0x0038,
+	SRC_GPU3D_RCR		= 0x003c,
+	SRC_VPU_G1_RCR		= 0x0048,
+	SRC_VPU_G2_RCR		= 0x004c,
+	SRC_VPUVC8KE_RCR	= 0x0050,
+	SRC_NOC_RCR		= 0x0054,
+};
+
 static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
 	[IMX8MQ_RESET_A53_CORE_POR_RESET0]	= { SRC_A53RCR0, BIT(0) },
 	[IMX8MQ_RESET_A53_CORE_POR_RESET1]	= { SRC_A53RCR0, BIT(1) },
@@ -253,6 +266,93 @@ static const struct imx7_src_variant variant_imx8mq = {
 	},
 };
 
+static const struct imx7_src_signal imx8mp_src_signals[IMX8MP_RESET_NUM] = {
+	[IMX8MP_RESET_A53_CORE_POR_RESET0]	= { SRC_A53RCR0, BIT(0) },
+	[IMX8MP_RESET_A53_CORE_POR_RESET1]	= { SRC_A53RCR0, BIT(1) },
+	[IMX8MP_RESET_A53_CORE_POR_RESET2]	= { SRC_A53RCR0, BIT(2) },
+	[IMX8MP_RESET_A53_CORE_POR_RESET3]	= { SRC_A53RCR0, BIT(3) },
+	[IMX8MP_RESET_A53_CORE_RESET0]		= { SRC_A53RCR0, BIT(4) },
+	[IMX8MP_RESET_A53_CORE_RESET1]		= { SRC_A53RCR0, BIT(5) },
+	[IMX8MP_RESET_A53_CORE_RESET2]		= { SRC_A53RCR0, BIT(6) },
+	[IMX8MP_RESET_A53_CORE_RESET3]		= { SRC_A53RCR0, BIT(7) },
+	[IMX8MP_RESET_A53_DBG_RESET0]		= { SRC_A53RCR0, BIT(8) },
+	[IMX8MP_RESET_A53_DBG_RESET1]		= { SRC_A53RCR0, BIT(9) },
+	[IMX8MP_RESET_A53_DBG_RESET2]		= { SRC_A53RCR0, BIT(10) },
+	[IMX8MP_RESET_A53_DBG_RESET3]		= { SRC_A53RCR0, BIT(11) },
+	[IMX8MP_RESET_A53_ETM_RESET0]		= { SRC_A53RCR0, BIT(12) },
+	[IMX8MP_RESET_A53_ETM_RESET1]		= { SRC_A53RCR0, BIT(13) },
+	[IMX8MP_RESET_A53_ETM_RESET2]		= { SRC_A53RCR0, BIT(14) },
+	[IMX8MP_RESET_A53_ETM_RESET3]		= { SRC_A53RCR0, BIT(15) },
+	[IMX8MP_RESET_A53_SOC_DBG_RESET]	= { SRC_A53RCR0, BIT(20) },
+	[IMX8MP_RESET_A53_L2RESET]		= { SRC_A53RCR0, BIT(21) },
+	[IMX8MP_RESET_SW_NON_SCLR_M7C_RST]	= { SRC_M4RCR, BIT(0) },
+	[IMX8MP_RESET_OTG1_PHY_RESET]		= { SRC_USBOPHY1_RCR, BIT(0) },
+	[IMX8MP_RESET_OTG2_PHY_RESET]		= { SRC_USBOPHY2_RCR, BIT(0) },
+	[IMX8MP_RESET_SUPERMIX_RESET]		= { SRC_SUPERMIX_RCR, BIT(0) },
+	[IMX8MP_RESET_AUDIOMIX_RESET]		= { SRC_AUDIOMIX_RCR, BIT(0) },
+	[IMX8MP_RESET_MLMIX_RESET]		= { SRC_MLMIX_RCR, BIT(0) },
+	[IMX8MP_RESET_PCIEPHY]			= { SRC_PCIEPHY_RCR, BIT(2) },
+	[IMX8MP_RESET_PCIEPHY_PERST]		= { SRC_PCIEPHY_RCR, BIT(3) },
+	[IMX8MP_RESET_PCIE_CTRL_APPS_EN]	= { SRC_PCIEPHY_RCR, BIT(6) },
+	[IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF]	= { SRC_PCIEPHY_RCR, BIT(11) },
+	[IMX8MP_RESET_HDMI_PHY_APB_RESET]	= { SRC_HDMI_RCR, BIT(0) },
+	[IMX8MP_RESET_MEDIA_RESET]		= { SRC_DISP_RCR, BIT(0) },
+	[IMX8MP_RESET_GPU2D_RESET]		= { SRC_GPU2D_RCR, BIT(0) },
+	[IMX8MP_RESET_GPU3D_RESET]		= { SRC_GPU3D_RCR, BIT(0) },
+	[IMX8MP_RESET_GPU_RESET]		= { SRC_GPU_RCR, BIT(0) },
+	[IMX8MP_RESET_VPU_RESET]		= { SRC_VPU_RCR, BIT(0) },
+	[IMX8MP_RESET_VPU_G1_RESET]		= { SRC_VPU_G1_RCR, BIT(0) },
+	[IMX8MP_RESET_VPU_G2_RESET]		= { SRC_VPU_G2_RCR, BIT(0) },
+	[IMX8MP_RESET_VPUVC8KE_RESET]		= { SRC_VPUVC8KE_RCR, BIT(0) },
+	[IMX8MP_RESET_NOC_RESET]		= { SRC_NOC_RCR, BIT(0) },
+};
+
+static int imx8mp_reset_set(struct reset_controller_dev *rcdev,
+			    unsigned long id, bool assert)
+{
+	struct imx7_src *imx7src = to_imx7_src(rcdev);
+	const unsigned int bit = imx7src->signals[id].bit;
+	unsigned int value = assert ? bit : 0;
+
+	switch (id) {
+	case IMX8MP_RESET_PCIEPHY:
+		/*
+		 * wait for more than 10us to release phy g_rst and
+		 * btnrst
+		 */
+		if (!assert)
+			udelay(10);
+		break;
+
+	case IMX8MP_RESET_PCIE_CTRL_APPS_EN:
+		value = assert ? 0 : bit;
+		break;
+	}
+
+	return imx7_reset_update(imx7src, id, value);
+}
+
+static int imx8mp_reset_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return imx8mp_reset_set(rcdev, id, true);
+}
+
+static int imx8mp_reset_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return imx8mp_reset_set(rcdev, id, false);
+}
+
+static const struct imx7_src_variant variant_imx8mp = {
+	.signals = imx8mp_src_signals,
+	.signals_num = ARRAY_SIZE(imx8mp_src_signals),
+	.ops = {
+		.assert   = imx8mp_reset_assert,
+		.deassert = imx8mp_reset_deassert,
+	},
+};
+
 static int imx7_reset_probe(struct platform_device *pdev)
 {
 	struct imx7_src *imx7src;
@@ -283,6 +383,7 @@ static int imx7_reset_probe(struct platform_device *pdev)
 static const struct of_device_id imx7_reset_dt_ids[] = {
 	{ .compatible = "fsl,imx7d-src", .data = &variant_imx7 },
 	{ .compatible = "fsl,imx8mq-src", .data = &variant_imx8mq },
+	{ .compatible = "fsl,imx8mp-src", .data = &variant_imx8mp },
 	{ /* sentinel */ },
 };
 
diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
index a9108ff563dc..f96716893c2a 100644
--- a/drivers/rpmsg/Kconfig
+++ b/drivers/rpmsg/Kconfig
@@ -24,13 +24,13 @@ config RPMSG_MTK_SCP
 	  remote processors in MediaTek platforms.
 	  This use IPI and IPC to communicate with remote processors.
 
-config RPMSG_QCOM_GLINK_NATIVE
+config RPMSG_QCOM_GLINK
 	tristate
 	select RPMSG
 
 config RPMSG_QCOM_GLINK_RPM
 	tristate "Qualcomm RPM Glink driver"
-	select RPMSG_QCOM_GLINK_NATIVE
+	select RPMSG_QCOM_GLINK
 	depends on HAS_IOMEM
 	depends on MAILBOX
 	help
@@ -40,7 +40,7 @@ config RPMSG_QCOM_GLINK_RPM
 
 config RPMSG_QCOM_GLINK_SMEM
 	tristate "Qualcomm SMEM Glink driver"
-	select RPMSG_QCOM_GLINK_NATIVE
+	select RPMSG_QCOM_GLINK
 	depends on MAILBOX
 	depends on QCOM_SMEM
 	help
diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
index ae92a7fb08f6..ffe932ef6050 100644
--- a/drivers/rpmsg/Makefile
+++ b/drivers/rpmsg/Makefile
@@ -2,8 +2,9 @@
 obj-$(CONFIG_RPMSG)		+= rpmsg_core.o
 obj-$(CONFIG_RPMSG_CHAR)	+= rpmsg_char.o
 obj-$(CONFIG_RPMSG_MTK_SCP)	+= mtk_rpmsg.o
+qcom_glink-objs			:= qcom_glink_native.o qcom_glink_ssr.o
+obj-$(CONFIG_RPMSG_QCOM_GLINK) += qcom_glink.o
 obj-$(CONFIG_RPMSG_QCOM_GLINK_RPM) += qcom_glink_rpm.o
-obj-$(CONFIG_RPMSG_QCOM_GLINK_NATIVE) += qcom_glink_native.o
 obj-$(CONFIG_RPMSG_QCOM_GLINK_SMEM) += qcom_glink_smem.o
 obj-$(CONFIG_RPMSG_QCOM_SMD)	+= qcom_smd.o
 obj-$(CONFIG_RPMSG_VIRTIO)	+= virtio_rpmsg_bus.o
diff --git a/drivers/rpmsg/qcom_glink_ssr.c b/drivers/rpmsg/qcom_glink_ssr.c
new file mode 100644
index 000000000000..dcd1ce616974
--- /dev/null
+++ b/drivers/rpmsg/qcom_glink_ssr.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017, Linaro Ltd.
+ */
+
+#include <linux/completion.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/rpmsg.h>
+#include <linux/remoteproc/qcom_rproc.h>
+
+/**
+ * struct do_cleanup_msg - The data structure for an SSR do_cleanup message
+ * version:     The G-Link SSR protocol version
+ * command:     The G-Link SSR command - do_cleanup
+ * seq_num:     Sequence number
+ * name_len:    Length of the name of the subsystem being restarted
+ * name:        G-Link edge name of the subsystem being restarted
+ */
+struct do_cleanup_msg {
+	__le32 version;
+	__le32 command;
+	__le32 seq_num;
+	__le32 name_len;
+	char name[32];
+};
+
+/**
+ * struct cleanup_done_msg - The data structure for an SSR cleanup_done message
+ * version:     The G-Link SSR protocol version
+ * response:    The G-Link SSR response to a do_cleanup command, cleanup_done
+ * seq_num:     Sequence number
+ */
+struct cleanup_done_msg {
+	__le32 version;
+	__le32 response;
+	__le32 seq_num;
+};
+
+/**
+ * G-Link SSR protocol commands
+ */
+#define GLINK_SSR_DO_CLEANUP	0
+#define GLINK_SSR_CLEANUP_DONE	1
+
+struct glink_ssr {
+	struct device *dev;
+	struct rpmsg_endpoint *ept;
+
+	struct notifier_block nb;
+
+	u32 seq_num;
+	struct completion completion;
+};
+
+/* Notifier list for all registered glink_ssr instances */
+static BLOCKING_NOTIFIER_HEAD(ssr_notifiers);
+
+/**
+ * qcom_glink_ssr_notify() - notify GLINK SSR about stopped remoteproc
+ * @ssr_name:	name of the remoteproc that has been stopped
+ */
+void qcom_glink_ssr_notify(const char *ssr_name)
+{
+	blocking_notifier_call_chain(&ssr_notifiers, 0, (void *)ssr_name);
+}
+EXPORT_SYMBOL_GPL(qcom_glink_ssr_notify);
+
+static int qcom_glink_ssr_callback(struct rpmsg_device *rpdev,
+				   void *data, int len, void *priv, u32 addr)
+{
+	struct cleanup_done_msg *msg = data;
+	struct glink_ssr *ssr = dev_get_drvdata(&rpdev->dev);
+
+	if (len < sizeof(*msg)) {
+		dev_err(ssr->dev, "message too short\n");
+		return -EINVAL;
+	}
+
+	if (le32_to_cpu(msg->version) != 0)
+		return -EINVAL;
+
+	if (le32_to_cpu(msg->response) != GLINK_SSR_CLEANUP_DONE)
+		return 0;
+
+	if (le32_to_cpu(msg->seq_num) != ssr->seq_num) {
+		dev_err(ssr->dev, "invalid sequence number of response\n");
+		return -EINVAL;
+	}
+
+	complete(&ssr->completion);
+
+	return 0;
+}
+
+static int qcom_glink_ssr_notifier_call(struct notifier_block *nb,
+					unsigned long event,
+					void *data)
+{
+	struct glink_ssr *ssr = container_of(nb, struct glink_ssr, nb);
+	struct do_cleanup_msg msg;
+	char *ssr_name = data;
+	int ret;
+
+	ssr->seq_num++;
+	reinit_completion(&ssr->completion);
+
+	memset(&msg, 0, sizeof(msg));
+	msg.command = cpu_to_le32(GLINK_SSR_DO_CLEANUP);
+	msg.seq_num = cpu_to_le32(ssr->seq_num);
+	msg.name_len = cpu_to_le32(strlen(ssr_name));
+	strlcpy(msg.name, ssr_name, sizeof(msg.name));
+
+	ret = rpmsg_send(ssr->ept, &msg, sizeof(msg));
+	if (ret < 0)
+		dev_err(ssr->dev, "failed to send cleanup message\n");
+
+	ret = wait_for_completion_timeout(&ssr->completion, HZ);
+	if (!ret)
+		dev_err(ssr->dev, "timeout waiting for cleanup done message\n");
+
+	return NOTIFY_DONE;
+}
+
+static int qcom_glink_ssr_probe(struct rpmsg_device *rpdev)
+{
+	struct glink_ssr *ssr;
+
+	ssr = devm_kzalloc(&rpdev->dev, sizeof(*ssr), GFP_KERNEL);
+	if (!ssr)
+		return -ENOMEM;
+
+	init_completion(&ssr->completion);
+
+	ssr->dev = &rpdev->dev;
+	ssr->ept = rpdev->ept;
+	ssr->nb.notifier_call = qcom_glink_ssr_notifier_call;
+
+	dev_set_drvdata(&rpdev->dev, ssr);
+
+	return blocking_notifier_chain_register(&ssr_notifiers, &ssr->nb);
+}
+
+static void qcom_glink_ssr_remove(struct rpmsg_device *rpdev)
+{
+	struct glink_ssr *ssr = dev_get_drvdata(&rpdev->dev);
+
+	blocking_notifier_chain_unregister(&ssr_notifiers, &ssr->nb);
+}
+
+static const struct rpmsg_device_id qcom_glink_ssr_match[] = {
+	{ "glink_ssr" },
+	{}
+};
+
+static struct rpmsg_driver qcom_glink_ssr_driver = {
+	.probe = qcom_glink_ssr_probe,
+	.remove = qcom_glink_ssr_remove,
+	.callback = qcom_glink_ssr_callback,
+	.id_table = qcom_glink_ssr_match,
+	.drv = {
+		.name = "qcom_glink_ssr",
+	},
+};
+module_rpmsg_driver(qcom_glink_ssr_driver);
diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
index e330ec4dfc33..a6361cad608b 100644
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -284,7 +284,7 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 EXPORT_SYMBOL(rpmsg_trysend_offchannel);
 
 /*
- * match an rpmsg channel with a channel info struct.
+ * match a rpmsg channel with a channel info struct.
  * this is used to make sure we're not creating rpmsg devices for channels
  * that already exist.
  */
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 376ebbf880d6..07d4f3374098 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -89,7 +89,7 @@ struct rpmsg_hdr {
 	u32 reserved;
 	u16 len;
 	u16 flags;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /**
diff --git a/drivers/rtc/rtc-fsl-ftm-alarm.c b/drivers/rtc/rtc-fsl-ftm-alarm.c
index 756af62b0486..23c811da4801 100644
--- a/drivers/rtc/rtc-fsl-ftm-alarm.c
+++ b/drivers/rtc/rtc-fsl-ftm-alarm.c
@@ -268,10 +268,8 @@ static int ftm_rtc_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "can't get irq number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, irq, ftm_rtc_alarm_interrupt,
 			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), rtc);
diff --git a/drivers/rtc/rtc-lpc24xx.c b/drivers/rtc/rtc-lpc24xx.c
index 00ef16ba9480..eec881a81067 100644
--- a/drivers/rtc/rtc-lpc24xx.c
+++ b/drivers/rtc/rtc-lpc24xx.c
@@ -205,10 +205,8 @@ static int lpc24xx_rtc_probe(struct platform_device *pdev)
 		return PTR_ERR(rtc->rtc_base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_warn(&pdev->dev, "can't get interrupt resource\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	rtc->clk_rtc = devm_clk_get(&pdev->dev, "rtc");
 	if (IS_ERR(rtc->clk_rtc)) {
diff --git a/drivers/rtc/rtc-mt2712.c b/drivers/rtc/rtc-mt2712.c
index 581b8731fb8a..f6bdbabd7202 100644
--- a/drivers/rtc/rtc-mt2712.c
+++ b/drivers/rtc/rtc-mt2712.c
@@ -328,10 +328,8 @@ static int mt2712_rtc_probe(struct platform_device *pdev)
 	mt2712_rtc_hw_init(mt2712_rtc);
 
 	mt2712_rtc->irq = platform_get_irq(pdev, 0);
-	if (mt2712_rtc->irq < 0) {
-		dev_err(&pdev->dev, "No IRQ resource\n");
+	if (mt2712_rtc->irq < 0)
 		return mt2712_rtc->irq;
-	}
 
 	platform_set_drvdata(pdev, mt2712_rtc);
 
diff --git a/drivers/rtc/rtc-rc5t619.c b/drivers/rtc/rtc-rc5t619.c
index 24e386ecbc7e..dd1a20977478 100644
--- a/drivers/rtc/rtc-rc5t619.c
+++ b/drivers/rtc/rtc-rc5t619.c
@@ -356,10 +356,8 @@ static int rc5t619_rtc_probe(struct platform_device *pdev)
 	int err;
 
 	rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
-	if (IS_ERR(rtc)) {
-		err = PTR_ERR(rtc);
+	if (!rtc)
 		return -ENOMEM;
-	}
 
 	rtc->rn5t618 = rn5t618;
 
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 7d079154f849..af5b0ecb8f89 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -143,9 +143,6 @@ int dasd_scan_partitions(struct dasd_block *block)
  */
 void dasd_destroy_partitions(struct dasd_block *block)
 {
-	/* The two structs have 168/176 byte on 31/64 bit. */
-	struct blkpg_partition bpart;
-	struct blkpg_ioctl_arg barg;
 	struct block_device *bdev;
 
 	/*
@@ -155,19 +152,10 @@ void dasd_destroy_partitions(struct dasd_block *block)
 	bdev = block->bdev;
 	block->bdev = NULL;
 
-	/*
-	 * See fs/partition/check.c:delete_partition
-	 * Can't call delete_partitions directly. Use ioctl.
-	 * The ioctl also does locking and invalidation.
-	 */
-	memset(&bpart, 0, sizeof(struct blkpg_partition));
-	memset(&barg, 0, sizeof(struct blkpg_ioctl_arg));
-	barg.data = (void __force __user *) &bpart;
-	barg.op = BLKPG_DEL_PARTITION;
-	for (bpart.pno = block->gdp->minors - 1; bpart.pno > 0; bpart.pno--)
-		ioctl_by_bdev(bdev, BLKPG, (unsigned long) &barg);
-
-	invalidate_partition(block->gdp, 0);
+	mutex_lock(&bdev->bd_mutex);
+	blk_drop_partitions(bdev);
+	mutex_unlock(&bdev->bd_mutex);
+
 	/* Matching blkdev_put to the blkdev_get in dasd_scan_partitions. */
 	blkdev_put(bdev, FMODE_READ);
 	set_capacity(block->gdp, 0);
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index b8453b594679..66191e864b0b 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -292,6 +292,8 @@ struct qdio_irq {
 
 	struct qdio_q *input_qs[QDIO_MAX_QUEUES_PER_IRQ];
 	struct qdio_q *output_qs[QDIO_MAX_QUEUES_PER_IRQ];
+	unsigned int max_input_qs;
+	unsigned int max_output_qs;
 
 	void (*irq_poll)(struct ccw_device *cdev, unsigned long data);
 	unsigned long poll_state;
@@ -364,16 +366,13 @@ static inline int multicast_outbound(struct qdio_q *q)
 extern u64 last_ai_time;
 
 /* prototypes for thin interrupt */
-void qdio_setup_thinint(struct qdio_irq *irq_ptr);
 int qdio_establish_thinint(struct qdio_irq *irq_ptr);
 void qdio_shutdown_thinint(struct qdio_irq *irq_ptr);
 void tiqdio_add_device(struct qdio_irq *irq_ptr);
 void tiqdio_remove_device(struct qdio_irq *irq_ptr);
 void tiqdio_inbound_processing(unsigned long q);
-int tiqdio_allocate_memory(void);
-void tiqdio_free_memory(void);
-int tiqdio_register_thinints(void);
-void tiqdio_unregister_thinints(void);
+int qdio_thinint_init(void);
+void qdio_thinint_exit(void);
 int test_nonshared_ind(struct qdio_irq *);
 
 /* prototypes for setup */
@@ -389,8 +388,10 @@ int qdio_setup_get_ssqd(struct qdio_irq *irq_ptr,
 			struct subchannel_id *schid,
 			struct qdio_ssqd_desc *data);
 int qdio_setup_irq(struct qdio_irq *irq_ptr, struct qdio_initialize *init_data);
+void qdio_shutdown_irq(struct qdio_irq *irq);
 void qdio_print_subchannel_info(struct qdio_irq *irq_ptr);
-void qdio_release_memory(struct qdio_irq *irq_ptr);
+void qdio_free_queues(struct qdio_irq *irq_ptr);
+void qdio_free_async_data(struct qdio_irq *irq_ptr);
 int qdio_setup_init(void);
 void qdio_setup_exit(void);
 int qdio_enable_async_operation(struct qdio_output_q *q);
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index bcc3ab14e72d..4bd6dbfe8387 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -880,47 +880,17 @@ static inline void qdio_check_outbound_pci_queues(struct qdio_irq *irq)
 			qdio_tasklet_schedule(out);
 }
 
-static void __tiqdio_inbound_processing(struct qdio_q *q)
+void tiqdio_inbound_processing(unsigned long data)
 {
-	unsigned int start = q->first_to_check;
-	int count;
+	struct qdio_q *q = (struct qdio_q *)data;
 
-	qperf_inc(q, tasklet_inbound);
 	if (need_siga_sync(q) && need_siga_sync_after_ai(q))
 		qdio_sync_queues(q);
 
 	/* The interrupt could be caused by a PCI request: */
 	qdio_check_outbound_pci_queues(q->irq_ptr);
 
-	count = qdio_inbound_q_moved(q, start);
-	if (count == 0)
-		return;
-
-	start = add_buf(start, count);
-	q->first_to_check = start;
-	qdio_kick_handler(q, count);
-
-	if (!qdio_inbound_q_done(q, start)) {
-		qperf_inc(q, tasklet_inbound_resched);
-		if (!qdio_tasklet_schedule(q))
-			return;
-	}
-
-	qdio_stop_polling(q);
-	/*
-	 * We need to check again to not lose initiative after
-	 * resetting the ACK state.
-	 */
-	if (!qdio_inbound_q_done(q, start)) {
-		qperf_inc(q, tasklet_inbound_resched2);
-		qdio_tasklet_schedule(q);
-	}
-}
-
-void tiqdio_inbound_processing(unsigned long data)
-{
-	struct qdio_q *q = (struct qdio_q *)data;
-	__tiqdio_inbound_processing(q);
+	__qdio_inbound_processing(q);
 }
 
 static inline void qdio_set_state(struct qdio_irq *irq_ptr,
@@ -1154,35 +1124,27 @@ int qdio_shutdown(struct ccw_device *cdev, int how)
 
 	/* cleanup subchannel */
 	spin_lock_irq(get_ccwdev_lock(cdev));
-
+	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP);
 	if (how & QDIO_FLAG_CLEANUP_USING_CLEAR)
 		rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP);
 	else
 		/* default behaviour is halt */
 		rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP);
+	spin_unlock_irq(get_ccwdev_lock(cdev));
 	if (rc) {
 		DBF_ERROR("%4x SHUTD ERR", irq_ptr->schid.sch_no);
 		DBF_ERROR("rc:%4d", rc);
 		goto no_cleanup;
 	}
 
-	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP);
-	spin_unlock_irq(get_ccwdev_lock(cdev));
 	wait_event_interruptible_timeout(cdev->private->wait_q,
 		irq_ptr->state == QDIO_IRQ_STATE_INACTIVE ||
 		irq_ptr->state == QDIO_IRQ_STATE_ERR,
 		10 * HZ);
-	spin_lock_irq(get_ccwdev_lock(cdev));
 
 no_cleanup:
 	qdio_shutdown_thinint(irq_ptr);
-
-	/* restore interrupt handler */
-	if ((void *)cdev->handler == (void *)qdio_int_handler) {
-		cdev->handler = irq_ptr->orig_handler;
-		cdev->private->intparm = 0;
-	}
-	spin_unlock_irq(get_ccwdev_lock(cdev));
+	qdio_shutdown_irq(irq_ptr);
 
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
 	mutex_unlock(&irq_ptr->setup_mutex);
@@ -1213,7 +1175,11 @@ int qdio_free(struct ccw_device *cdev)
 	cdev->private->qdio_data = NULL;
 	mutex_unlock(&irq_ptr->setup_mutex);
 
-	qdio_release_memory(irq_ptr);
+	qdio_free_async_data(irq_ptr);
+	qdio_free_queues(irq_ptr);
+	free_page((unsigned long) irq_ptr->qdr);
+	free_page(irq_ptr->chsc_page);
+	free_page((unsigned long) irq_ptr);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(qdio_free);
@@ -1229,6 +1195,7 @@ int qdio_allocate(struct ccw_device *cdev, unsigned int no_input_qs,
 {
 	struct subchannel_id schid;
 	struct qdio_irq *irq_ptr;
+	int rc = -ENOMEM;
 
 	ccw_device_get_schid(cdev, &schid);
 	DBF_EVENT("qallocate:%4x", schid.sch_no);
@@ -1240,12 +1207,12 @@ int qdio_allocate(struct ccw_device *cdev, unsigned int no_input_qs,
 	/* irq_ptr must be in GFP_DMA since it contains ccw1.cda */
 	irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 	if (!irq_ptr)
-		goto out_err;
+		return -ENOMEM;
 
 	irq_ptr->cdev = cdev;
 	mutex_init(&irq_ptr->setup_mutex);
 	if (qdio_allocate_dbf(irq_ptr))
-		goto out_rel;
+		goto err_dbf;
 
 	DBF_DEV_EVENT(DBF_ERR, irq_ptr, "alloc niq:%1u noq:%1u", no_input_qs,
 		      no_output_qs);
@@ -1258,24 +1225,30 @@ int qdio_allocate(struct ccw_device *cdev, unsigned int no_input_qs,
 	 */
 	irq_ptr->chsc_page = get_zeroed_page(GFP_KERNEL);
 	if (!irq_ptr->chsc_page)
-		goto out_rel;
+		goto err_chsc;
 
 	/* qdr is used in ccw1.cda which is u32 */
 	irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 	if (!irq_ptr->qdr)
-		goto out_rel;
+		goto err_qdr;
 
-	if (qdio_allocate_qs(irq_ptr, no_input_qs, no_output_qs))
-		goto out_rel;
+	rc = qdio_allocate_qs(irq_ptr, no_input_qs, no_output_qs);
+	if (rc)
+		goto err_queues;
 
 	INIT_LIST_HEAD(&irq_ptr->entry);
 	cdev->private->qdio_data = irq_ptr;
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
 	return 0;
-out_rel:
-	qdio_release_memory(irq_ptr);
-out_err:
-	return -ENOMEM;
+
+err_queues:
+	free_page((unsigned long) irq_ptr->qdr);
+err_qdr:
+	free_page(irq_ptr->chsc_page);
+err_chsc:
+err_dbf:
+	free_page((unsigned long) irq_ptr);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(qdio_allocate);
 
@@ -1338,6 +1311,10 @@ int qdio_establish(struct ccw_device *cdev,
 	if (!irq_ptr)
 		return -ENODEV;
 
+	if (init_data->no_input_qs > irq_ptr->max_input_qs ||
+	    init_data->no_output_qs > irq_ptr->max_output_qs)
+		return -EINVAL;
+
 	if ((init_data->no_input_qs && !init_data->input_handler) ||
 	    (init_data->no_output_qs && !init_data->output_handler))
 		return -EINVAL;
@@ -1352,8 +1329,8 @@ int qdio_establish(struct ccw_device *cdev,
 
 	rc = qdio_establish_thinint(irq_ptr);
 	if (rc) {
+		qdio_shutdown_irq(irq_ptr);
 		mutex_unlock(&irq_ptr->setup_mutex);
-		qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
 		return rc;
 	}
 
@@ -1371,8 +1348,9 @@ int qdio_establish(struct ccw_device *cdev,
 	if (rc) {
 		DBF_ERROR("%4x est IO ERR", irq_ptr->schid.sch_no);
 		DBF_ERROR("rc:%4x", rc);
+		qdio_shutdown_thinint(irq_ptr);
+		qdio_shutdown_irq(irq_ptr);
 		mutex_unlock(&irq_ptr->setup_mutex);
-		qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
 		return rc;
 	}
 
@@ -1472,8 +1450,7 @@ static inline int buf_in_between(int bufnr, int start, int count)
 	}
 
 	/* wrap-around case */
-	if ((bufnr >= start && bufnr <= QDIO_MAX_BUFFERS_PER_Q) ||
-	    (bufnr < end))
+	if (bufnr >= start || bufnr < end)
 		return 1;
 	else
 		return 0;
@@ -1868,16 +1845,11 @@ static int __init init_QDIO(void)
 	rc = qdio_setup_init();
 	if (rc)
 		goto out_debug;
-	rc = tiqdio_allocate_memory();
+	rc = qdio_thinint_init();
 	if (rc)
 		goto out_cache;
-	rc = tiqdio_register_thinints();
-	if (rc)
-		goto out_ti;
 	return 0;
 
-out_ti:
-	tiqdio_free_memory();
 out_cache:
 	qdio_setup_exit();
 out_debug:
@@ -1887,8 +1859,7 @@ static int __init init_QDIO(void)
 
 static void __exit exit_QDIO(void)
 {
-	tiqdio_unregister_thinints();
-	tiqdio_free_memory();
+	qdio_thinint_exit();
 	qdio_setup_exit();
 	qdio_debug_exit();
 }
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index 3083edd61f0c..2c5cc6ec668e 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -135,6 +135,27 @@ static void set_impl_params(struct qdio_irq *irq_ptr,
 	}
 }
 
+static void __qdio_free_queues(struct qdio_q **queues, unsigned int count)
+{
+	struct qdio_q *q;
+	unsigned int i;
+
+	for (i = 0; i < count; i++) {
+		q = queues[i];
+		free_page((unsigned long) q->slib);
+		kmem_cache_free(qdio_q_cache, q);
+	}
+}
+
+void qdio_free_queues(struct qdio_irq *irq_ptr)
+{
+	__qdio_free_queues(irq_ptr->input_qs, irq_ptr->max_input_qs);
+	irq_ptr->max_input_qs = 0;
+
+	__qdio_free_queues(irq_ptr->output_qs, irq_ptr->max_output_qs);
+	irq_ptr->max_output_qs = 0;
+}
+
 static int __qdio_allocate_qs(struct qdio_q **irq_ptr_qs, int nr_queues)
 {
 	struct qdio_q *q;
@@ -142,12 +163,15 @@ static int __qdio_allocate_qs(struct qdio_q **irq_ptr_qs, int nr_queues)
 
 	for (i = 0; i < nr_queues; i++) {
 		q = kmem_cache_zalloc(qdio_q_cache, GFP_KERNEL);
-		if (!q)
+		if (!q) {
+			__qdio_free_queues(irq_ptr_qs, i);
 			return -ENOMEM;
+		}
 
 		q->slib = (struct slib *) __get_free_page(GFP_KERNEL);
 		if (!q->slib) {
 			kmem_cache_free(qdio_q_cache, q);
+			__qdio_free_queues(irq_ptr_qs, i);
 			return -ENOMEM;
 		}
 		irq_ptr_qs[i] = q;
@@ -162,8 +186,16 @@ int qdio_allocate_qs(struct qdio_irq *irq_ptr, int nr_input_qs, int nr_output_qs
 	rc = __qdio_allocate_qs(irq_ptr->input_qs, nr_input_qs);
 	if (rc)
 		return rc;
+
 	rc = __qdio_allocate_qs(irq_ptr->output_qs, nr_output_qs);
-	return rc;
+	if (rc) {
+		__qdio_free_queues(irq_ptr->input_qs, nr_input_qs);
+		return rc;
+	}
+
+	irq_ptr->max_input_qs = nr_input_qs;
+	irq_ptr->max_output_qs = nr_output_qs;
+	return 0;
 }
 
 static void setup_queues_misc(struct qdio_q *q, struct qdio_irq *irq_ptr,
@@ -347,45 +379,28 @@ void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr)
 	DBF_EVENT("3:%4x qib:%4x", irq_ptr->ssqd_desc.qdioac3, irq_ptr->qib.ac);
 }
 
-void qdio_release_memory(struct qdio_irq *irq_ptr)
+void qdio_free_async_data(struct qdio_irq *irq_ptr)
 {
 	struct qdio_q *q;
 	int i;
 
-	/*
-	 * Must check queue array manually since irq_ptr->nr_input_queues /
-	 * irq_ptr->nr_input_queues may not yet be set.
-	 */
-	for (i = 0; i < QDIO_MAX_QUEUES_PER_IRQ; i++) {
-		q = irq_ptr->input_qs[i];
-		if (q) {
-			free_page((unsigned long) q->slib);
-			kmem_cache_free(qdio_q_cache, q);
-		}
-	}
-	for (i = 0; i < QDIO_MAX_QUEUES_PER_IRQ; i++) {
+	for (i = 0; i < irq_ptr->max_output_qs; i++) {
 		q = irq_ptr->output_qs[i];
-		if (q) {
-			if (q->u.out.use_cq) {
-				int n;
-
-				for (n = 0; n < QDIO_MAX_BUFFERS_PER_Q; ++n) {
-					struct qaob *aob = q->u.out.aobs[n];
-					if (aob) {
-						qdio_release_aob(aob);
-						q->u.out.aobs[n] = NULL;
-					}
-				}
+		if (q->u.out.use_cq) {
+			unsigned int n;
+
+			for (n = 0; n < QDIO_MAX_BUFFERS_PER_Q; n++) {
+				struct qaob *aob = q->u.out.aobs[n];
 
-				qdio_disable_async_operation(&q->u.out);
+				if (aob) {
+					qdio_release_aob(aob);
+					q->u.out.aobs[n] = NULL;
+				}
 			}
-			free_page((unsigned long) q->slib);
-			kmem_cache_free(qdio_q_cache, q);
+
+			qdio_disable_async_operation(&q->u.out);
 		}
 	}
-	free_page((unsigned long) irq_ptr->qdr);
-	free_page(irq_ptr->chsc_page);
-	free_page((unsigned long) irq_ptr);
 }
 
 static void __qdio_allocate_fill_qdr(struct qdio_irq *irq_ptr,
@@ -480,7 +495,6 @@ int qdio_setup_irq(struct qdio_irq *irq_ptr, struct qdio_initialize *init_data)
 	}
 
 	setup_qib(irq_ptr, init_data);
-	qdio_setup_thinint(irq_ptr);
 	set_impl_params(irq_ptr, init_data->qib_param_field_format,
 			init_data->qib_param_field,
 			init_data->input_slib_elements,
@@ -491,6 +505,12 @@ int qdio_setup_irq(struct qdio_irq *irq_ptr, struct qdio_initialize *init_data)
 
 	/* qdr, qib, sls, slsbs, slibs, sbales are filled now */
 
+	/* set our IRQ handler */
+	spin_lock_irq(get_ccwdev_lock(cdev));
+	irq_ptr->orig_handler = cdev->handler;
+	cdev->handler = qdio_int_handler;
+	spin_unlock_irq(get_ccwdev_lock(cdev));
+
 	/* get qdio commands */
 	ciw = ccw_device_get_ciw(cdev, CIW_TYPE_EQUEUE);
 	if (!ciw) {
@@ -506,12 +526,18 @@ int qdio_setup_irq(struct qdio_irq *irq_ptr, struct qdio_initialize *init_data)
 	}
 	irq_ptr->aqueue = *ciw;
 
-	/* set new interrupt handler */
+	return 0;
+}
+
+void qdio_shutdown_irq(struct qdio_irq *irq)
+{
+	struct ccw_device *cdev = irq->cdev;
+
+	/* restore IRQ handler */
 	spin_lock_irq(get_ccwdev_lock(cdev));
-	irq_ptr->orig_handler = cdev->handler;
-	cdev->handler = qdio_int_handler;
+	cdev->handler = irq->orig_handler;
+	cdev->private->intparm = 0;
 	spin_unlock_irq(get_ccwdev_lock(cdev));
-	return 0;
 }
 
 void qdio_print_subchannel_info(struct qdio_irq *irq_ptr)
diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index ae50373617cd..7a440e4328cd 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -197,47 +197,21 @@ static int set_subchannel_ind(struct qdio_irq *irq_ptr, int reset)
 	return rc;
 }
 
-/* allocate non-shared indicators and shared indicator */
-int __init tiqdio_allocate_memory(void)
-{
-	q_indicators = kcalloc(TIQDIO_NR_INDICATORS,
-			       sizeof(struct indicator_t),
-			       GFP_KERNEL);
-	if (!q_indicators)
-		return -ENOMEM;
-	return 0;
-}
-
-void tiqdio_free_memory(void)
-{
-	kfree(q_indicators);
-}
-
-int __init tiqdio_register_thinints(void)
+int qdio_establish_thinint(struct qdio_irq *irq_ptr)
 {
 	int rc;
 
-	rc = register_adapter_interrupt(&tiqdio_airq);
-	if (rc) {
-		DBF_EVENT("RTI:%x", rc);
-		return rc;
-	}
-	return 0;
-}
-
-int qdio_establish_thinint(struct qdio_irq *irq_ptr)
-{
 	if (!is_thinint_irq(irq_ptr))
 		return 0;
-	return set_subchannel_ind(irq_ptr, 0);
-}
 
-void qdio_setup_thinint(struct qdio_irq *irq_ptr)
-{
-	if (!is_thinint_irq(irq_ptr))
-		return;
 	irq_ptr->dsci = get_indicator();
 	DBF_HEX(&irq_ptr->dsci, sizeof(void *));
+
+	rc = set_subchannel_ind(irq_ptr, 0);
+	if (rc)
+		put_indicator(irq_ptr->dsci);
+
+	return rc;
 }
 
 void qdio_shutdown_thinint(struct qdio_irq *irq_ptr)
@@ -250,8 +224,27 @@ void qdio_shutdown_thinint(struct qdio_irq *irq_ptr)
 	put_indicator(irq_ptr->dsci);
 }
 
-void __exit tiqdio_unregister_thinints(void)
+int __init qdio_thinint_init(void)
+{
+	int rc;
+
+	q_indicators = kcalloc(TIQDIO_NR_INDICATORS, sizeof(struct indicator_t),
+			       GFP_KERNEL);
+	if (!q_indicators)
+		return -ENOMEM;
+
+	rc = register_adapter_interrupt(&tiqdio_airq);
+	if (rc) {
+		DBF_EVENT("RTI:%x", rc);
+		kfree(q_indicators);
+		return rc;
+	}
+	return 0;
+}
+
+void __exit qdio_thinint_exit(void)
 {
 	WARN_ON(!list_empty(&tiq_list));
 	unregister_adapter_interrupt(&tiqdio_airq);
+	kfree(q_indicators);
 }
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index b5b3154e2c28..bb49d83cadc7 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -2237,7 +2237,7 @@ static bool __init blogic_inquiry(struct blogic_adapter *adapter)
 					"INQUIRE INSTALLED DEVICES ID 0 TO 7");
 		for (tgt_id = 0; tgt_id < 8; tgt_id++)
 			adapter->tgt_flags[tgt_id].tgt_exists =
-				(installed_devs0to7[tgt_id] != 0 ? true : false);
+				installed_devs0to7[tgt_id] != 0;
 	}
 	/*
 	   Issue the Inquire Setup Information command.
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 83a60b0a8cd8..a0a2b3abc512 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1632,7 +1632,7 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct Scsi_Host *shost;
 	struct aac_dev *aac;
 	struct list_head *insert = &aac_devices;
-	int error = -ENODEV;
+	int error;
 	int unique_id = 0;
 	u64 dmamask;
 	int mask_bits = 0;
@@ -1657,7 +1657,6 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	error = pci_enable_device(pdev);
 	if (error)
 		goto out;
-	error = -ENODEV;
 
 	if (!(aac_drivers[index].quirks & AAC_QUIRK_SRC)) {
 		error = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
@@ -1689,8 +1688,10 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_set_master(pdev);
 
 	shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev));
-	if (!shost)
+	if (!shost) {
+		error = -ENOMEM;
 		goto out_disable_pdev;
+	}
 
 	shost->irq = pdev->irq;
 	shost->unique_id = unique_id;
@@ -1714,8 +1715,11 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	aac->fibs = kcalloc(shost->can_queue + AAC_NUM_MGT_FIB,
 			    sizeof(struct fib),
 			    GFP_KERNEL);
-	if (!aac->fibs)
+	if (!aac->fibs) {
+		error = -ENOMEM;
 		goto out_free_host;
+	}
+
 	spin_lock_init(&aac->fib_lock);
 
 	mutex_init(&aac->ioctl_mutex);
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index a336a458c978..e4a09b93d00c 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -3662,8 +3662,7 @@ ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force)
 		return;
 
 	tstate = ahd->enabled_targets[scsi_id];
-	if (tstate != NULL)
-		kfree(tstate);
+	kfree(tstate);
 	ahd->enabled_targets[scsi_id] = NULL;
 }
 #endif
@@ -6054,14 +6053,13 @@ ahd_alloc(void *platform_arg, char *name)
 {
 	struct  ahd_softc *ahd;
 
-	ahd = kmalloc(sizeof(*ahd), GFP_ATOMIC);
+	ahd = kzalloc(sizeof(*ahd), GFP_ATOMIC);
 	if (!ahd) {
 		printk("aic7xxx: cannot malloc softc!\n");
 		kfree(name);
 		return NULL;
 	}
 
-	memset(ahd, 0, sizeof(*ahd));
 	ahd->seep_config = kmalloc(sizeof(*ahd->seep_config), GFP_ATOMIC);
 	if (ahd->seep_config == NULL) {
 		kfree(ahd);
@@ -6120,8 +6118,7 @@ ahd_set_unit(struct ahd_softc *ahd, int unit)
 void
 ahd_set_name(struct ahd_softc *ahd, char *name)
 {
-	if (ahd->name != NULL)
-		kfree(ahd->name);
+	kfree(ahd->name);
 	ahd->name = name;
 }
 
@@ -6182,12 +6179,9 @@ ahd_free(struct ahd_softc *ahd)
 		kfree(ahd->black_hole);
 	}
 #endif
-	if (ahd->name != NULL)
-		kfree(ahd->name);
-	if (ahd->seep_config != NULL)
-		kfree(ahd->seep_config);
-	if (ahd->saved_stack != NULL)
-		kfree(ahd->saved_stack);
+	kfree(ahd->name);
+	kfree(ahd->seep_config);
+	kfree(ahd->saved_stack);
 	kfree(ahd);
 	return;
 }
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 84fc499cb1e6..3d4df906fa4f 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -2178,8 +2178,7 @@ ahc_free_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel, int force)
 	if (channel == 'B')
 		scsi_id += 8;
 	tstate = ahc->enabled_targets[scsi_id];
-	if (tstate != NULL)
-		kfree(tstate);
+	kfree(tstate);
 	ahc->enabled_targets[scsi_id] = NULL;
 }
 #endif
@@ -4384,13 +4383,13 @@ ahc_alloc(void *platform_arg, char *name)
 	struct  ahc_softc *ahc;
 	int	i;
 
-	ahc = kmalloc(sizeof(*ahc), GFP_ATOMIC);
+	ahc = kzalloc(sizeof(*ahc), GFP_ATOMIC);
 	if (!ahc) {
 		printk("aic7xxx: cannot malloc softc!\n");
 		kfree(name);
 		return NULL;
 	}
-	memset(ahc, 0, sizeof(*ahc));
+
 	ahc->seep_config = kmalloc(sizeof(*ahc->seep_config), GFP_ATOMIC);
 	if (ahc->seep_config == NULL) {
 		kfree(ahc);
@@ -4453,8 +4452,7 @@ ahc_set_unit(struct ahc_softc *ahc, int unit)
 void
 ahc_set_name(struct ahc_softc *ahc, char *name)
 {
-	if (ahc->name != NULL)
-		kfree(ahc->name);
+	kfree(ahc->name);
 	ahc->name = name;
 }
 
@@ -4515,10 +4513,8 @@ ahc_free(struct ahc_softc *ahc)
 		kfree(ahc->black_hole);
 	}
 #endif
-	if (ahc->name != NULL)
-		kfree(ahc->name);
-	if (ahc->seep_config != NULL)
-		kfree(ahc->seep_config);
+	kfree(ahc->name);
+	kfree(ahc->seep_config);
 	kfree(ahc);
 	return;
 }
@@ -4927,8 +4923,7 @@ ahc_fini_scbdata(struct ahc_softc *ahc)
 	case 0:
 		break;
 	}
-	if (scb_data->scbarray != NULL)
-		kfree(scb_data->scbarray);
+	kfree(scb_data->scbarray);
 }
 
 static void
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c
index 3ddc8852bc32..105adba559a1 100644
--- a/drivers/scsi/aic94xx/aic94xx_sds.c
+++ b/drivers/scsi/aic94xx/aic94xx_sds.c
@@ -406,7 +406,7 @@ struct asd_manuf_sec {
 	u8    sas_addr[SAS_ADDR_SIZE];
 	u8    pcba_sn[ASD_PCBA_SN_SIZE];
 	/* Here start the other segments */
-	u8    linked_list[0];
+	u8    linked_list[];
 } __attribute__ ((packed));
 
 struct asd_manuf_phy_desc {
@@ -449,7 +449,7 @@ struct asd_ms_sb_desc {
 	u8    type;
 	u8    node_desc_index;
 	u8    conn_desc_index;
-	u8    _recvd[0];
+	u8    _recvd[];
 } __attribute__ ((packed));
 
 #if 0
@@ -478,12 +478,12 @@ struct asd_ms_conn_desc {
 	u8    size_sideband_desc;
 	u32   _resvd;
 	u8    name[16];
-	struct asd_ms_sb_desc sb_desc[0];
+	struct asd_ms_sb_desc sb_desc[];
 } __attribute__ ((packed));
 
 struct asd_nd_phy_desc {
 	u8    vp_attch_type;
-	u8    attch_specific[0];
+	u8    attch_specific[];
 } __attribute__ ((packed));
 
 #if 0
@@ -503,7 +503,7 @@ struct asd_ms_node_desc {
 	u8    size_phy_desc;
 	u8    _resvd;
 	u8    name[16];
-	struct asd_nd_phy_desc phy_desc[0];
+	struct asd_nd_phy_desc phy_desc[];
 } __attribute__ ((packed));
 
 struct asd_ms_conn_map {
@@ -518,7 +518,7 @@ struct asd_ms_conn_map {
 	u8    usage_model_id;
 	u32   _resvd;
 	struct asd_ms_conn_desc conn_desc[0];
-	struct asd_ms_node_desc node_desc[0];
+	struct asd_ms_node_desc node_desc[];
 } __attribute__ ((packed));
 
 struct asd_ctrla_phy_entry {
@@ -542,7 +542,7 @@ struct asd_ll_el {
 	u8   id0;
 	u8   id1;
 	__le16  next;
-	u8   something_here[0];
+	u8   something_here[];
 } __attribute__ ((packed));
 
 static int asd_poll_flash(struct asd_ha_struct *asd_ha)
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 0f554ebb8f2c..fb4c469bd89f 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -708,7 +708,7 @@ bfa_reqq_resume(struct bfa_s *bfa, int qid)
 	}
 }
 
-bfa_boolean_t
+static bfa_boolean_t
 bfa_isr_rspq(struct bfa_s *bfa, int qid)
 {
 	struct bfi_msg_s *m;
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index 284baa3b0c8e..766f2b5ed2ab 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -436,7 +436,7 @@ bfa_fcpim_port_iostats(struct bfa_s *bfa,
 	return BFA_STATUS_OK;
 }
 
-void
+static void
 bfa_ioim_profile_comp(struct bfa_ioim_s *ioim)
 {
 	struct bfa_itnim_latency_s *io_lat =
@@ -453,7 +453,7 @@ bfa_ioim_profile_comp(struct bfa_ioim_s *ioim)
 	io_lat->avg[idx] += val;
 }
 
-void
+static void
 bfa_ioim_profile_start(struct bfa_ioim_s *ioim)
 {
 	ioim->start_time = jiffies;
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index 7c3eadc58b98..297a77f5806c 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -1283,7 +1283,7 @@ bfa_fcs_lport_n2n_offline(struct bfa_fcs_lport_s *port)
 	n2n_port->reply_oxid = 0;
 }
 
-void
+static void
 bfa_fcport_get_loop_attr(struct bfa_fcs_lport_s *port)
 {
 	int i = 0, j = 0, bit = 0, alpa_bit = 0;
@@ -4358,7 +4358,7 @@ bfa_fcs_lport_ns_sm_online(struct bfa_fcs_lport_ns_s *ns,
 			bfa_sm_set_state(ns,
 				bfa_fcs_lport_ns_sm_sending_gid_ft);
 			bfa_fcs_lport_ns_send_gid_ft(ns, NULL);
-		};
+		}
 		break;
 
 	default:
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 82801b366500..fc294e1950a6 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1575,7 +1575,7 @@ bfa_fcs_rport_sm_nsdisc_sent(struct bfa_fcs_rport_s *rport,
 			bfa_timer_start(rport->fcs->bfa, &rport->timer,
 					bfa_fcs_rport_timeout, rport,
 					bfa_fcs_rport_del_timeout);
-		};
+		}
 		break;
 
 	case RPSM_EVENT_DELETE:
@@ -2449,7 +2449,7 @@ bfa_fcs_rport_hal_online_action(struct bfa_fcs_rport_s *rport)
 		bfa_fcs_itnim_brp_online(rport->itnim);
 		if (!BFA_FCS_PID_IS_WKA(rport->pid))
 			bfa_fcs_rpf_rport_online(rport);
-	};
+	}
 
 	wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(port));
 	wwn2str(rpwwn_buf, rport->pwwn);
diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c
index 18b58b2f304f..6fd3383ee538 100644
--- a/drivers/scsi/bfa/bfa_ioc_ct.c
+++ b/drivers/scsi/bfa/bfa_ioc_ct.c
@@ -364,7 +364,7 @@ bfa_ioc_ct_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix)
 	writel(r32, rb + FNC_PERS_REG);
 }
 
-bfa_boolean_t
+static bfa_boolean_t
 bfa_ioc_ct2_lpu_read_stat(struct bfa_ioc_s *ioc)
 {
 	u32	r32;
@@ -744,7 +744,7 @@ bfa_ioc_ct2_mem_init(void __iomem *rb)
 	writel(0, (rb + CT2_MBIST_CTL_REG));
 }
 
-void
+static void
 bfa_ioc_ct2_mac_reset(void __iomem *rb)
 {
 	/* put port0, port1 MAC & AHB in reset */
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index 6d2131441f0a..0b7d2e8f4a66 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -4284,7 +4284,7 @@ bfa_fcport_dportdisable(struct bfa_s *bfa)
 	bfa_port_set_dportenabled(&bfa->modules.port, BFA_FALSE);
 }
 
-void
+static void
 bfa_fcport_ddportenable(struct bfa_s *bfa)
 {
 	/*
@@ -4293,7 +4293,7 @@ bfa_fcport_ddportenable(struct bfa_s *bfa)
 	bfa_sm_send_event(BFA_FCPORT_MOD(bfa), BFA_FCPORT_SM_DDPORTENABLE);
 }
 
-void
+static void
 bfa_fcport_ddportdisable(struct bfa_s *bfa)
 {
 	/*
@@ -5517,7 +5517,6 @@ uf_recv(struct bfa_s *bfa, struct bfi_uf_frm_rcvd_s *m)
 	struct bfa_uf_s *uf = &ufm->uf_list[uf_tag];
 	struct bfa_uf_buf_s *uf_buf;
 	uint8_t *buf;
-	struct fchs_s *fchs;
 
 	uf_buf = (struct bfa_uf_buf_s *)
 			bfa_mem_get_dmabuf_kva(ufm, uf_tag, uf->pb_len);
@@ -5526,8 +5525,6 @@ uf_recv(struct bfa_s *bfa, struct bfi_uf_frm_rcvd_s *m)
 	m->frm_len = be16_to_cpu(m->frm_len);
 	m->xfr_len = be16_to_cpu(m->xfr_len);
 
-	fchs = (struct fchs_s *)uf_buf;
-
 	list_del(&uf->qe);	/* dequeue from posted queue */
 
 	uf->data_ptr = buf;
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index eb0c76338295..bc5d84f87d8f 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -50,7 +50,7 @@ int		pcie_max_read_reqsz;
 int		bfa_debugfs_enable = 1;
 int		msix_disable_cb = 0, msix_disable_ct = 0;
 int		max_xfer_size = BFAD_MAX_SECTORS >> 1;
-int		max_rport_logins = BFA_FCS_MAX_RPORT_LOGINS;
+static int	max_rport_logins = BFA_FCS_MAX_RPORT_LOGINS;
 
 /* Firmware releated */
 u32	bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size;
diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c
index fbfce02e5b93..5ae1e3f78910 100644
--- a/drivers/scsi/bfa/bfad_attr.c
+++ b/drivers/scsi/bfa/bfad_attr.c
@@ -437,7 +437,7 @@ bfad_im_vport_create(struct fc_vport *fc_vport, bool disable)
 	return status;
 }
 
-int
+static int
 bfad_im_issue_fc_host_lip(struct Scsi_Host *shost)
 {
 	struct bfad_im_port_s *im_port =
@@ -562,7 +562,7 @@ bfad_im_vport_disable(struct fc_vport *fc_vport, bool disable)
 	return 0;
 }
 
-void
+static void
 bfad_im_vport_set_symbolic_name(struct fc_vport *fc_vport)
 {
 	struct bfad_vport_s *vport = (struct bfad_vport_s *)fc_vport->dd_data;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 1cbb431fa682..0e33324e16f5 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -945,7 +945,7 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
 				 */
 				if (interface->enabled)
 					fcoe_ctlr_link_up(ctlr);
-			};
+			}
 		} else if (fcoe_ctlr_link_down(ctlr)) {
 			switch (cdev->enabled) {
 			case FCOE_CTLR_DISABLED:
@@ -965,7 +965,7 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
 				put_cpu();
 				fcoe_clean_pending_queue(lport);
 				wait_for_upload = 1;
-			};
+			}
 		}
 	}
 	mutex_unlock(&bnx2fc_dev_lock);
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 2b070f0835df..1aba5897ccb0 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1081,6 +1081,7 @@ int bnx2fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
 }
 
 static int bnx2fc_abts_cleanup(struct bnx2fc_cmd *io_req)
+	__must_hold(&tgt->tgt_lock)
 {
 	struct bnx2fc_rport *tgt = io_req->tgt;
 	unsigned int time_left;
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index bc1086ae6835..8ce8592f6a64 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -1127,10 +1127,9 @@ static void do_abort_rpl_rss(struct cxgbi_device *cdev, struct sk_buff *skb)
 	if (!csk)
 		goto rel_skb;
 
-	if (csk)
-		pr_info_ipaddr("csk 0x%p,%u,0x%lx,%u, status %u.\n",
-			       (&csk->saddr), (&csk->daddr), csk,
-			       csk->state, csk->flags, csk->tid, rpl->status);
+	pr_info_ipaddr("csk 0x%p,%u,0x%lx,%u, status %u.\n",
+		       (&csk->saddr), (&csk->daddr), csk,
+		       csk->state, csk->flags, csk->tid, rpl->status);
 
 	if (rpl->status == CPL_ERR_ABORT_FAILED)
 		goto rel_skb;
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 02dff3a684e0..2cf889512ece 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -1120,7 +1120,7 @@ static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u6
 {
 	struct adpt_device* d;
 
-	if(chan < 0 || chan >= MAX_CHANNEL)
+	if (chan >= MAX_CHANNEL)
 		return NULL;
 	
 	d = pHba->channel[chan].device[id];
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 25dae9f0b205..cb41d166e0c0 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -1915,7 +1915,7 @@ static int fcoe_device_notification(struct notifier_block *notifier,
 		case FCOE_CTLR_ENABLED:
 		case FCOE_CTLR_UNUSED:
 			fcoe_ctlr_link_up(ctlr);
-		};
+		}
 	} else if (fcoe_ctlr_link_down(ctlr)) {
 		switch (cdev->enabled) {
 		case FCOE_CTLR_DISABLED:
@@ -1927,7 +1927,7 @@ static int fcoe_device_notification(struct notifier_block *notifier,
 			stats->LinkFailureCount++;
 			put_cpu();
 			fcoe_clean_pending_queue(lport);
-		};
+		}
 	}
 out:
 	return rc;
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 18584ab27c32..7910b573bacb 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -49,8 +49,8 @@
 
 static struct kmem_cache *fnic_sgl_cache[FNIC_SGL_NUM_CACHES];
 static struct kmem_cache *fnic_io_req_cache;
-LIST_HEAD(fnic_list);
-DEFINE_SPINLOCK(fnic_list_lock);
+static LIST_HEAD(fnic_list);
+static DEFINE_SPINLOCK(fnic_list_lock);
 
 /* Supported devices by fnic module */
 static struct pci_device_id fnic_id_table[] = {
diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c
index 1b88a3b53eee..a2beee6e09f0 100644
--- a/drivers/scsi/fnic/vnic_dev.c
+++ b/drivers/scsi/fnic/vnic_dev.c
@@ -254,7 +254,7 @@ void vnic_dev_free_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring)
 	}
 }
 
-int vnic_dev_cmd1(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd, int wait)
+static int vnic_dev_cmd1(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd, int wait)
 {
 	struct vnic_devcmd __iomem *devcmd = vdev->devcmd;
 	int delay;
@@ -316,7 +316,7 @@ int vnic_dev_cmd1(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd, int wait)
 	return -ETIMEDOUT;
 }
 
-int vnic_dev_cmd2(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
+static int vnic_dev_cmd2(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
 		int wait)
 {
 	struct devcmd2_controller *dc2c = vdev->devcmd2;
@@ -411,7 +411,7 @@ int vnic_dev_cmd2(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
 }
 
 
-int vnic_dev_init_devcmd1(struct vnic_dev *vdev)
+static int vnic_dev_init_devcmd1(struct vnic_dev *vdev)
 {
 	vdev->devcmd = vnic_dev_get_res(vdev, RES_TYPE_DEVCMD, 0);
 	if (!vdev->devcmd)
@@ -422,7 +422,7 @@ int vnic_dev_init_devcmd1(struct vnic_dev *vdev)
 }
 
 
-int vnic_dev_init_devcmd2(struct vnic_dev *vdev)
+static int vnic_dev_init_devcmd2(struct vnic_dev *vdev)
 {
 	int err;
 	unsigned int fetch_index;
@@ -492,7 +492,7 @@ int vnic_dev_init_devcmd2(struct vnic_dev *vdev)
 }
 
 
-void vnic_dev_deinit_devcmd2(struct vnic_dev *vdev)
+static void vnic_dev_deinit_devcmd2(struct vnic_dev *vdev)
 {
 	vnic_dev_free_desc_ring(vdev, &vdev->devcmd2->results_ring);
 	vnic_wq_disable(&vdev->devcmd2->wq);
@@ -503,7 +503,7 @@ void vnic_dev_deinit_devcmd2(struct vnic_dev *vdev)
 }
 
 
-int vnic_dev_cmd_no_proxy(struct vnic_dev *vdev,
+static int vnic_dev_cmd_no_proxy(struct vnic_dev *vdev,
 	enum vnic_devcmd_cmd cmd, u64 *a0, u64 *a1, int wait)
 {
 	int err;
diff --git a/drivers/scsi/fnic/vnic_wq.c b/drivers/scsi/fnic/vnic_wq.c
index 015af2cdabaf..442972c04e65 100644
--- a/drivers/scsi/fnic/vnic_wq.c
+++ b/drivers/scsi/fnic/vnic_wq.c
@@ -25,7 +25,7 @@
 #include "vnic_wq.h"
 
 
-int vnic_wq_get_ctrl(struct vnic_dev *vdev, struct vnic_wq *wq,
+static int vnic_wq_get_ctrl(struct vnic_dev *vdev, struct vnic_wq *wq,
 		unsigned int index, enum vnic_res_type res_type)
 {
 	wq->ctrl = vnic_dev_get_res(vdev, res_type, index);
@@ -37,7 +37,7 @@ int vnic_wq_get_ctrl(struct vnic_dev *vdev, struct vnic_wq *wq,
 }
 
 
-int vnic_wq_alloc_ring(struct vnic_dev *vdev, struct vnic_wq *wq,
+static int vnic_wq_alloc_ring(struct vnic_dev *vdev, struct vnic_wq *wq,
 		unsigned int desc_count, unsigned int desc_size)
 {
 	return vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size);
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index fe03410268e6..7f150d52b4a6 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -329,8 +329,8 @@ static void gdth_scsi_done(struct scsi_cmnd *scp)
 		scp->scsi_done(scp);
 }
 
-int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd,
-                   int timeout, u32 *info)
+static int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd,
+			  char *cmnd, int timeout, u32 *info)
 {
     gdth_ha_str *ha = shost_priv(sdev->host);
     struct scsi_cmnd *scp;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 7da9e060b270..635f6f9cffc4 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3640,6 +3640,11 @@ static void ibmvfc_tgt_implicit_logout_and_del(struct ibmvfc_target *tgt)
 	struct ibmvfc_host *vhost = tgt->vhost;
 	struct ibmvfc_event *evt;
 
+	if (!vhost->logged_in) {
+		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+		return;
+	}
+
 	if (vhost->discovery_threads >= disc_threads)
 		return;
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 7f66a7783209..59f0f1030c54 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -2320,16 +2320,12 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 static int ibmvscsi_remove(struct vio_dev *vdev)
 {
 	struct ibmvscsi_host_data *hostdata = dev_get_drvdata(&vdev->dev);
-	unsigned long flags;
 
 	srp_remove_host(hostdata->host);
 	scsi_remove_host(hostdata->host);
 
 	purge_requests(hostdata, DID_ERROR);
-
-	spin_lock_irqsave(hostdata->host->host_lock, flags);
 	release_event_pool(&hostdata->pool, hostdata);
-	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
 
 	ibmvscsi_release_crq_queue(&hostdata->queue, hostdata,
 					max_events);
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index d48a8fa997b9..7d77997d26d4 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -1164,7 +1164,7 @@ static void ipr_update_ata_class(struct ipr_resource_entry *res, unsigned int pr
 	default:
 		res->ata_class = ATA_DEV_UNKNOWN;
 		break;
-	};
+	}
 }
 
 /**
@@ -9529,8 +9529,7 @@ static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
 		}
 	}
 
-	if (ioa_cfg->ipr_cmd_pool)
-		dma_pool_destroy(ioa_cfg->ipr_cmd_pool);
+	dma_pool_destroy(ioa_cfg->ipr_cmd_pool);
 
 	kfree(ioa_cfg->ipr_cmnd_list);
 	kfree(ioa_cfg->ipr_cmnd_list_dma);
diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h
index 680e30947671..4e6b1decbca7 100644
--- a/drivers/scsi/isci/isci.h
+++ b/drivers/scsi/isci/isci.h
@@ -500,19 +500,19 @@ struct sci_timer {
 static inline
 void sci_init_timer(struct sci_timer *tmr, void (*fn)(struct timer_list *t))
 {
-	tmr->cancel = 0;
+	tmr->cancel = false;
 	timer_setup(&tmr->timer, fn, 0);
 }
 
 static inline void sci_mod_timer(struct sci_timer *tmr, unsigned long msec)
 {
-	tmr->cancel = 0;
+	tmr->cancel = false;
 	mod_timer(&tmr->timer, jiffies + msecs_to_jiffies(msec));
 }
 
 static inline void sci_del_timer(struct sci_timer *tmr)
 {
-	tmr->cancel = 1;
+	tmr->cancel = true;
 	del_timer(&tmr->timer);
 }
 
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index c5a828a041e0..5d716d388707 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -160,6 +160,7 @@ static void sas_ata_task_done(struct sas_task *task)
 }
 
 static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
+	__must_hold(ap->lock)
 {
 	struct sas_task *task;
 	struct scatterlist *sg;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 80d1e661b0d4..565a21401660 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -7936,19 +7936,13 @@ lpfc_els_timeout_handler(struct lpfc_vport *vport)
 	if (unlikely(!pring))
 		return;
 
-	if ((phba->pport->load_flag & FC_UNLOADING))
+	if (phba->pport->load_flag & FC_UNLOADING)
 		return;
+
 	spin_lock_irq(&phba->hbalock);
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		spin_lock(&pring->ring_lock);
 
-	if ((phba->pport->load_flag & FC_UNLOADING)) {
-		if (phba->sli_rev == LPFC_SLI_REV4)
-			spin_unlock(&pring->ring_lock);
-		spin_unlock_irq(&phba->hbalock);
-		return;
-	}
-
 	list_for_each_entry_safe(piocb, tmp_iocb, &pring->txcmplq, list) {
 		cmd = &piocb->iocb;
 
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index a45936e08031..12d2b2775773 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -1491,11 +1491,6 @@ lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
 
 	phba = vport->phba;
 
-	if (vport->load_flag & FC_UNLOADING) {
-		ret = -ENODEV;
-		goto out_fail;
-	}
-
 	if (unlikely(vport->load_flag & FC_UNLOADING)) {
 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
 				 "6124 Fail IO, Driver unload\n");
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index 565419bf8d74..5f5aecea5b55 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -841,9 +841,6 @@ lpfc_nvmet_xmt_ls_rsp(struct nvmet_fc_target_port *tgtport,
 	struct ulp_bde64 bpl;
 	int rc;
 
-	if (phba->pport->load_flag & FC_UNLOADING)
-		return -ENODEV;
-
 	if (phba->pport->load_flag & FC_UNLOADING)
 		return -ENODEV;
 
@@ -938,11 +935,6 @@ lpfc_nvmet_xmt_fcp_op(struct nvmet_fc_target_port *tgtport,
 		goto aerr;
 	}
 
-	if (phba->pport->load_flag & FC_UNLOADING) {
-		rc = -ENODEV;
-		goto aerr;
-	}
-
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	if (ctxp->ts_cmd_nvme) {
 		if (rsp->op == NVMET_FCOP_RSP)
@@ -1062,9 +1054,6 @@ lpfc_nvmet_xmt_fcp_abort(struct nvmet_fc_target_port *tgtport,
 	struct lpfc_queue *wq;
 	unsigned long flags;
 
-	if (phba->pport->load_flag & FC_UNLOADING)
-		return;
-
 	if (phba->pport->load_flag & FC_UNLOADING)
 		return;
 
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 8443f2f35be2..8f918df631bf 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -302,8 +302,8 @@ static struct pci_driver megaraid_pci_driver = {
 // definitions for the device attributes for exporting logical drive number
 // for a scsi address (Host, Channel, Id, Lun)
 
-DEVICE_ATTR(megaraid_mbox_app_hndl, S_IRUSR, megaraid_sysfs_show_app_hndl,
-		NULL);
+static DEVICE_ATTR(megaraid_mbox_app_hndl, S_IRUSR, megaraid_sysfs_show_app_hndl,
+		   NULL);
 
 // Host template initializer for megaraid mbox sysfs device attributes
 static struct device_attribute *megaraid_shost_attrs[] = {
@@ -312,7 +312,7 @@ static struct device_attribute *megaraid_shost_attrs[] = {
 };
 
 
-DEVICE_ATTR(megaraid_mbox_ld, S_IRUSR, megaraid_sysfs_show_ldnum, NULL);
+static DEVICE_ATTR(megaraid_mbox_ld, S_IRUSR, megaraid_sysfs_show_ldnum, NULL);
 
 // Host template initializer for megaraid mbox sysfs device attributes
 static struct device_attribute *megaraid_sdev_attrs[] = {
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index babe85d7b537..fb9c3ceed508 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -81,7 +81,7 @@ int smp_affinity_enable = 1;
 module_param(smp_affinity_enable, int, 0444);
 MODULE_PARM_DESC(smp_affinity_enable, "SMP affinity feature enable/disable Default: enable(1)");
 
-int rdpq_enable = 1;
+static int rdpq_enable = 1;
 module_param(rdpq_enable, int, 0444);
 MODULE_PARM_DESC(rdpq_enable, "Allocate reply queue in chunks for large queue depth enable/disable Default: enable(1)");
 
@@ -89,7 +89,7 @@ unsigned int dual_qdepth_disable;
 module_param(dual_qdepth_disable, int, 0444);
 MODULE_PARM_DESC(dual_qdepth_disable, "Disable dual queue depth feature. Default: 0");
 
-unsigned int scmd_timeout = MEGASAS_DEFAULT_CMD_TIMEOUT;
+static unsigned int scmd_timeout = MEGASAS_DEFAULT_CMD_TIMEOUT;
 module_param(scmd_timeout, int, 0444);
 MODULE_PARM_DESC(scmd_timeout, "scsi command timeout (10-90s), default 90s. See megasas_reset_timer.");
 
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
index 89c3685f5163..3b3d04d7671f 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -85,7 +85,7 @@ u32 mega_mod64(u64 dividend, u32 divisor)
  *
  * @return quotient
  **/
-u64 mega_div64_32(uint64_t dividend, uint32_t divisor)
+static u64 mega_div64_32(uint64_t dividend, uint32_t divisor)
 {
 	u32 remainder;
 	u64 d;
@@ -367,7 +367,7 @@ u8 MR_ValidateMapInfo(struct megasas_instance *instance, u64 map_id)
 	return 1;
 }
 
-u32 MR_GetSpanBlock(u32 ld, u64 row, u64 *span_blk,
+static u32 MR_GetSpanBlock(u32 ld, u64 row, u64 *span_blk,
 		    struct MR_DRV_RAID_MAP_ALL *map)
 {
 	struct MR_SPAN_BLOCK_INFO *pSpanBlock = MR_LdSpanInfoGet(ld, map);
@@ -417,7 +417,7 @@ u32 MR_GetSpanBlock(u32 ld, u64 row, u64 *span_blk,
 *    div_error	   - Devide error code.
 */
 
-u32 mr_spanset_get_span_block(struct megasas_instance *instance,
+static u32 mr_spanset_get_span_block(struct megasas_instance *instance,
 		u32 ld, u64 row, u64 *span_blk, struct MR_DRV_RAID_MAP_ALL *map)
 {
 	struct fusion_context *fusion = instance->ctrl_context;
@@ -642,7 +642,7 @@ static u32 get_arm_from_strip(struct megasas_instance *instance,
 }
 
 /* This Function will return Phys arm */
-u8 get_arm(struct megasas_instance *instance, u32 ld, u8 span, u64 stripe,
+static u8 get_arm(struct megasas_instance *instance, u32 ld, u8 span, u64 stripe,
 		struct MR_DRV_RAID_MAP_ALL *map)
 {
 	struct MR_LD_RAID  *raid = MR_LdRaidGet(ld, map);
@@ -785,7 +785,7 @@ static u8 mr_spanset_get_phy_params(struct megasas_instance *instance, u32 ld,
 *    span          - Span number
 *    block         - Absolute Block number in the physical disk
 */
-u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow,
+static u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow,
 		u16 stripRef, struct IO_REQUEST_INFO *io_info,
 		struct RAID_CONTEXT *pRAID_Context,
 		struct MR_DRV_RAID_MAP_ALL *map)
@@ -1342,7 +1342,7 @@ void mr_update_load_balance_params(struct MR_DRV_RAID_MAP_ALL *drv_map,
 	}
 }
 
-u8 megasas_get_best_arm_pd(struct megasas_instance *instance,
+static u8 megasas_get_best_arm_pd(struct megasas_instance *instance,
 			   struct LD_LOAD_BALANCE_INFO *lbInfo,
 			   struct IO_REQUEST_INFO *io_info,
 			   struct MR_DRV_RAID_MAP_ALL *drv_map)
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index b2ad96564484..e0f923b8cc50 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -176,7 +176,7 @@ static inline bool megasas_check_same_4gb_region
  * megasas_enable_intr_fusion -	Enables interrupts
  * @regs:			MFI register set
  */
-void
+static void
 megasas_enable_intr_fusion(struct megasas_instance *instance)
 {
 	struct megasas_register_set __iomem *regs;
@@ -198,7 +198,7 @@ megasas_enable_intr_fusion(struct megasas_instance *instance)
  * megasas_disable_intr_fusion - Disables interrupt
  * @regs:			 MFI register set
  */
-void
+static void
 megasas_disable_intr_fusion(struct megasas_instance *instance)
 {
 	u32 mask = 0xFFFFFFFF;
@@ -4230,7 +4230,7 @@ void  megasas_reset_reply_desc(struct megasas_instance *instance)
  * megasas_refire_mgmt_cmd :	Re-fire management commands
  * @instance:				Controller's soft instance
 */
-void megasas_refire_mgmt_cmd(struct megasas_instance *instance,
+static void megasas_refire_mgmt_cmd(struct megasas_instance *instance,
 			     bool return_ioctl)
 {
 	int j;
@@ -4239,7 +4239,7 @@ void megasas_refire_mgmt_cmd(struct megasas_instance *instance,
 	struct megasas_cmd *cmd_mfi;
 	union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
 	u16 smid;
-	bool refire_cmd = 0;
+	bool refire_cmd = false;
 	u8 result;
 	u32 opcode = 0;
 
@@ -4713,12 +4713,12 @@ int megasas_task_abort_fusion(struct scsi_cmnd *scmd)
 		"attempting task abort! scmd(0x%p) tm_dev_handle 0x%x\n",
 		scmd, devhandle);
 
-	mr_device_priv_data->tm_busy = 1;
+	mr_device_priv_data->tm_busy = true;
 	ret = megasas_issue_tm(instance, devhandle,
 			scmd->device->channel, scmd->device->id, smid,
 			MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
 			mr_device_priv_data);
-	mr_device_priv_data->tm_busy = 0;
+	mr_device_priv_data->tm_busy = false;
 
 	mutex_unlock(&instance->reset_mutex);
 	scmd_printk(KERN_INFO, scmd, "task abort %s!! scmd(0x%p)\n",
@@ -4783,12 +4783,12 @@ int megasas_reset_target_fusion(struct scsi_cmnd *scmd)
 	sdev_printk(KERN_INFO, scmd->device,
 		"attempting target reset! scmd(0x%p) tm_dev_handle: 0x%x\n",
 		scmd, devhandle);
-	mr_device_priv_data->tm_busy = 1;
+	mr_device_priv_data->tm_busy = true;
 	ret = megasas_issue_tm(instance, devhandle,
 			scmd->device->channel, scmd->device->id, 0,
 			MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
 			mr_device_priv_data);
-	mr_device_priv_data->tm_busy = 0;
+	mr_device_priv_data->tm_busy = false;
 	mutex_unlock(&instance->reset_mutex);
 	scmd_printk(KERN_NOTICE, scmd, "target reset %s!!\n",
 		(ret == SUCCESS) ? "SUCCESS" : "FAILED");
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 663782bb790d..7416242624f0 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -413,7 +413,7 @@ static void _clone_sg_entries(struct MPT3SAS_ADAPTER *ioc,
 {
 	Mpi2SGESimple32_t *sgel, *sgel_next;
 	u32  sgl_flags, sge_chain_count = 0;
-	bool is_write = 0;
+	bool is_write = false;
 	u16 i = 0;
 	void __iomem *buffer_iomem;
 	phys_addr_t buffer_iomem_phys;
@@ -482,7 +482,7 @@ static void _clone_sg_entries(struct MPT3SAS_ADAPTER *ioc,
 
 	if (le32_to_cpu(sgel->FlagsLength) &
 			(MPI2_SGE_FLAGS_HOST_TO_IOC << MPI2_SGE_FLAGS_SHIFT))
-		is_write = 1;
+		is_write = true;
 
 	for (i = 0; i < MPT_MIN_PHYS_SEGMENTS + ioc->facts.MaxChainDepth; i++) {
 
@@ -2806,58 +2806,38 @@ _base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge,
 static int
 _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
 {
-	u64 required_mask, coherent_mask;
 	struct sysinfo s;
-	/* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
-	int dma_mask = (ioc->hba_mpi_version_belonged > MPI2_VERSION) ? 63 : 64;
-
-	if (ioc->is_mcpu_endpoint)
-		goto try_32bit;
+	int dma_mask;
 
-	required_mask = dma_get_required_mask(&pdev->dev);
-	if (sizeof(dma_addr_t) == 4 || required_mask == 32)
-		goto try_32bit;
-
-	if (ioc->dma_mask)
-		coherent_mask = DMA_BIT_MASK(dma_mask);
+	if (ioc->is_mcpu_endpoint ||
+	    sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma ||
+	    dma_get_required_mask(&pdev->dev) <= 32)
+		dma_mask = 32;
+	/* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
+	else if (ioc->hba_mpi_version_belonged > MPI2_VERSION)
+		dma_mask = 63;
 	else
-		coherent_mask = DMA_BIT_MASK(32);
+		dma_mask = 64;
 
 	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(dma_mask)) ||
-	    dma_set_coherent_mask(&pdev->dev, coherent_mask))
-		goto try_32bit;
-
-	ioc->base_add_sg_single = &_base_add_sg_single_64;
-	ioc->sge_size = sizeof(Mpi2SGESimple64_t);
-	ioc->dma_mask = dma_mask;
-	goto out;
-
- try_32bit:
-	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
+	    dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(dma_mask)))
 		return -ENODEV;
 
-	ioc->base_add_sg_single = &_base_add_sg_single_32;
-	ioc->sge_size = sizeof(Mpi2SGESimple32_t);
-	ioc->dma_mask = 32;
- out:
+	if (dma_mask > 32) {
+		ioc->base_add_sg_single = &_base_add_sg_single_64;
+		ioc->sge_size = sizeof(Mpi2SGESimple64_t);
+	} else {
+		ioc->base_add_sg_single = &_base_add_sg_single_32;
+		ioc->sge_size = sizeof(Mpi2SGESimple32_t);
+	}
+
 	si_meminfo(&s);
 	ioc_info(ioc, "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
-		 ioc->dma_mask, convert_to_kb(s.totalram));
+		dma_mask, convert_to_kb(s.totalram));
 
 	return 0;
 }
 
-static int
-_base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
-				      struct pci_dev *pdev)
-{
-	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(ioc->dma_mask))) {
-		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
-			return -ENODEV;
-	}
-	return 0;
-}
-
 /**
  * _base_check_enable_msix - checks MSIX capabable.
  * @ioc: per adapter object
@@ -4827,8 +4807,8 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 {
 	int i = 0;
 	int j = 0;
+	int dma_alloc_count = 0;
 	struct chain_tracker *ct;
-	struct reply_post_struct *rps;
 
 	dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
 
@@ -4870,29 +4850,34 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 	}
 
 	if (ioc->reply_post) {
-		do {
-			rps = &ioc->reply_post[i];
-			if (rps->reply_post_free) {
-				dma_pool_free(
-				    ioc->reply_post_free_dma_pool,
-				    rps->reply_post_free,
-				    rps->reply_post_free_dma);
-				dexitprintk(ioc,
-					    ioc_info(ioc, "reply_post_free_pool(0x%p): free\n",
-						     rps->reply_post_free));
-				rps->reply_post_free = NULL;
+		dma_alloc_count = DIV_ROUND_UP(ioc->reply_queue_count,
+				RDPQ_MAX_INDEX_IN_ONE_CHUNK);
+		for (i = 0; i < ioc->reply_queue_count; i++) {
+			if (i % RDPQ_MAX_INDEX_IN_ONE_CHUNK == 0
+			    && dma_alloc_count) {
+				if (ioc->reply_post[i].reply_post_free) {
+					dma_pool_free(
+					    ioc->reply_post_free_dma_pool,
+					    ioc->reply_post[i].reply_post_free,
+					ioc->reply_post[i].reply_post_free_dma);
+					dexitprintk(ioc, ioc_info(ioc,
+					   "reply_post_free_pool(0x%p): free\n",
+					   ioc->reply_post[i].reply_post_free));
+					ioc->reply_post[i].reply_post_free =
+									NULL;
+				}
+				--dma_alloc_count;
 			}
-		} while (ioc->rdpq_array_enable &&
-			   (++i < ioc->reply_queue_count));
+		}
+		dma_pool_destroy(ioc->reply_post_free_dma_pool);
 		if (ioc->reply_post_free_array &&
 			ioc->rdpq_array_enable) {
 			dma_pool_free(ioc->reply_post_free_array_dma_pool,
-				ioc->reply_post_free_array,
-				ioc->reply_post_free_array_dma);
+			    ioc->reply_post_free_array,
+			    ioc->reply_post_free_array_dma);
 			ioc->reply_post_free_array = NULL;
 		}
 		dma_pool_destroy(ioc->reply_post_free_array_dma_pool);
-		dma_pool_destroy(ioc->reply_post_free_dma_pool);
 		kfree(ioc->reply_post);
 	}
 
@@ -4902,8 +4887,7 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 					ioc->pcie_sg_lookup[i].pcie_sgl,
 					ioc->pcie_sg_lookup[i].pcie_sgl_dma);
 		}
-		if (ioc->pcie_sgl_dma_pool)
-			dma_pool_destroy(ioc->pcie_sgl_dma_pool);
+		dma_pool_destroy(ioc->pcie_sgl_dma_pool);
 	}
 
 	if (ioc->config_page) {
@@ -4935,7 +4919,7 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 }
 
 /**
- * is_MSB_are_same - checks whether all reply queues in a set are
+ * mpt3sas_check_same_4gb_region - checks whether all reply queues in a set are
  *	having same upper 32bits in their base memory address.
  * @reply_pool_start_address: Base address of a reply queue set
  * @pool_sz: Size of single Reply Descriptor Post Queues pool size
@@ -4945,7 +4929,7 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
  */
 
 static int
-is_MSB_are_same(long reply_pool_start_address, u32 pool_sz)
+mpt3sas_check_same_4gb_region(long reply_pool_start_address, u32 pool_sz)
 {
 	long reply_pool_end_address;
 
@@ -4958,6 +4942,88 @@ is_MSB_are_same(long reply_pool_start_address, u32 pool_sz)
 		return 0;
 }
 
+/**
+ * base_alloc_rdpq_dma_pool - Allocating DMA'able memory
+ *                     for reply queues.
+ * @ioc: per adapter object
+ * @sz: DMA Pool size
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+base_alloc_rdpq_dma_pool(struct MPT3SAS_ADAPTER *ioc, int sz)
+{
+	int i = 0;
+	u32 dma_alloc_count = 0;
+	int reply_post_free_sz = ioc->reply_post_queue_depth *
+		sizeof(Mpi2DefaultReplyDescriptor_t);
+	int count = ioc->rdpq_array_enable ? ioc->reply_queue_count : 1;
+
+	ioc->reply_post = kcalloc(count, sizeof(struct reply_post_struct),
+			GFP_KERNEL);
+	if (!ioc->reply_post)
+		return -ENOMEM;
+	/*
+	 *  For INVADER_SERIES each set of 8 reply queues(0-7, 8-15, ..) and
+	 *  VENTURA_SERIES each set of 16 reply queues(0-15, 16-31, ..) should
+	 *  be within 4GB boundary i.e reply queues in a set must have same
+	 *  upper 32-bits in their memory address. so here driver is allocating
+	 *  the DMA'able memory for reply queues according.
+	 *  Driver uses limitation of
+	 *  VENTURA_SERIES to manage INVADER_SERIES as well.
+	 */
+	dma_alloc_count = DIV_ROUND_UP(ioc->reply_queue_count,
+				RDPQ_MAX_INDEX_IN_ONE_CHUNK);
+	ioc->reply_post_free_dma_pool =
+		dma_pool_create("reply_post_free pool",
+		    &ioc->pdev->dev, sz, 16, 0);
+	if (!ioc->reply_post_free_dma_pool)
+		return -ENOMEM;
+	for (i = 0; i < ioc->reply_queue_count; i++) {
+		if ((i % RDPQ_MAX_INDEX_IN_ONE_CHUNK == 0) && dma_alloc_count) {
+			ioc->reply_post[i].reply_post_free =
+			    dma_pool_alloc(ioc->reply_post_free_dma_pool,
+				GFP_KERNEL,
+				&ioc->reply_post[i].reply_post_free_dma);
+			if (!ioc->reply_post[i].reply_post_free)
+				return -ENOMEM;
+			/*
+			 * Each set of RDPQ pool must satisfy 4gb boundary
+			 * restriction.
+			 * 1) Check if allocated resources for RDPQ pool are in
+			 *	the same 4GB range.
+			 * 2) If #1 is true, continue with 64 bit DMA.
+			 * 3) If #1 is false, return 1. which means free all the
+			 * resources and set DMA mask to 32 and allocate.
+			 */
+			if (!mpt3sas_check_same_4gb_region(
+				(long)ioc->reply_post[i].reply_post_free, sz)) {
+				dinitprintk(ioc,
+				    ioc_err(ioc, "bad Replypost free pool(0x%p)"
+				    "reply_post_free_dma = (0x%llx)\n",
+				    ioc->reply_post[i].reply_post_free,
+				    (unsigned long long)
+				    ioc->reply_post[i].reply_post_free_dma));
+				return -EAGAIN;
+			}
+			memset(ioc->reply_post[i].reply_post_free, 0,
+						RDPQ_MAX_INDEX_IN_ONE_CHUNK *
+						reply_post_free_sz);
+			dma_alloc_count--;
+
+		} else {
+			ioc->reply_post[i].reply_post_free =
+			    (Mpi2ReplyDescriptorsUnion_t *)
+			    ((long)ioc->reply_post[i-1].reply_post_free
+			    + reply_post_free_sz);
+			ioc->reply_post[i].reply_post_free_dma =
+			    (dma_addr_t)
+			    (ioc->reply_post[i-1].reply_post_free_dma +
+			    reply_post_free_sz);
+		}
+	}
+	return 0;
+}
+
 /**
  * _base_allocate_memory_pools - allocate start of day memory pools
  * @ioc: per adapter object
@@ -4972,10 +5038,12 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 	u16 chains_needed_per_io;
 	u32 sz, total_sz, reply_post_free_sz, reply_post_free_array_sz;
 	u32 retry_sz;
+	u32 rdpq_sz = 0;
 	u16 max_request_credit, nvme_blocks_needed;
 	unsigned short sg_tablesize;
 	u16 sge_size;
 	int i, j;
+	int ret = 0;
 	struct chain_tracker *ct;
 
 	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
@@ -5129,54 +5197,28 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 	/* reply post queue, 16 byte align */
 	reply_post_free_sz = ioc->reply_post_queue_depth *
 	    sizeof(Mpi2DefaultReplyDescriptor_t);
-
-	sz = reply_post_free_sz;
+	rdpq_sz = reply_post_free_sz * RDPQ_MAX_INDEX_IN_ONE_CHUNK;
 	if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
-		sz *= ioc->reply_queue_count;
-
-	ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
-	    (ioc->reply_queue_count):1,
-	    sizeof(struct reply_post_struct), GFP_KERNEL);
-
-	if (!ioc->reply_post) {
-		ioc_err(ioc, "reply_post_free pool: kcalloc failed\n");
-		goto out;
-	}
-	ioc->reply_post_free_dma_pool = dma_pool_create("reply_post_free pool",
-	    &ioc->pdev->dev, sz, 16, 0);
-	if (!ioc->reply_post_free_dma_pool) {
-		ioc_err(ioc, "reply_post_free pool: dma_pool_create failed\n");
-		goto out;
-	}
-	i = 0;
-	do {
-		ioc->reply_post[i].reply_post_free =
-		    dma_pool_zalloc(ioc->reply_post_free_dma_pool,
-		    GFP_KERNEL,
-		    &ioc->reply_post[i].reply_post_free_dma);
-		if (!ioc->reply_post[i].reply_post_free) {
-			ioc_err(ioc, "reply_post_free pool: dma_pool_alloc failed\n");
-			goto out;
-		}
-		dinitprintk(ioc,
-			    ioc_info(ioc, "reply post free pool (0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
-				     ioc->reply_post[i].reply_post_free,
-				     ioc->reply_post_queue_depth,
-				     8, sz / 1024));
-		dinitprintk(ioc,
-			    ioc_info(ioc, "reply_post_free_dma = (0x%llx)\n",
-				     (u64)ioc->reply_post[i].reply_post_free_dma));
-		total_sz += sz;
-	} while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
-
-	if (ioc->dma_mask > 32) {
-		if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
-			ioc_warn(ioc, "no suitable consistent DMA mask for %s\n",
-				 pci_name(ioc->pdev));
-			goto out;
+		rdpq_sz = reply_post_free_sz * ioc->reply_queue_count;
+	ret = base_alloc_rdpq_dma_pool(ioc, rdpq_sz);
+	if (ret == -EAGAIN) {
+		/*
+		 * Free allocated bad RDPQ memory pools.
+		 * Change dma coherent mask to 32 bit and reallocate RDPQ
+		 */
+		_base_release_memory_pools(ioc);
+		ioc->use_32bit_dma = true;
+		if (_base_config_dma_addressing(ioc, ioc->pdev) != 0) {
+			ioc_err(ioc,
+			    "32 DMA mask failed %s\n", pci_name(ioc->pdev));
+			return -ENODEV;
 		}
-	}
-
+		if (base_alloc_rdpq_dma_pool(ioc, rdpq_sz))
+			return -ENOMEM;
+	} else if (ret == -ENOMEM)
+		return -ENOMEM;
+	total_sz = rdpq_sz * (!ioc->rdpq_array_enable ? 1 :
+	    DIV_ROUND_UP(ioc->reply_queue_count, RDPQ_MAX_INDEX_IN_ONE_CHUNK));
 	ioc->scsiio_depth = ioc->hba_queue_depth -
 	    ioc->hi_priority_depth - ioc->internal_depth;
 
@@ -5188,7 +5230,6 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 		    ioc_info(ioc, "scsi host: can_queue depth (%d)\n",
 			     ioc->shost->can_queue));
 
-
 	/* contiguous pool for request and chains, 16 byte align, one extra "
 	 * "frame for smid=0
 	 */
@@ -5405,7 +5446,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 	 * Actual requirement is not alignment, but we need start and end of
 	 * DMA address must have same upper 32 bit address.
 	 */
-	if (!is_MSB_are_same((long)ioc->sense, sz)) {
+	if (!mpt3sas_check_same_4gb_region((long)ioc->sense, sz)) {
 		//Release Sense pool & Reallocate
 		dma_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
 		dma_pool_destroy(ioc->sense_dma_pool);
@@ -7158,7 +7199,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	ioc->smp_affinity_enable = smp_affinity_enable;
 
 	ioc->rdpq_array_enable_assigned = 0;
-	ioc->dma_mask = 0;
+	ioc->use_32bit_dma = 0;
 	if (ioc->is_aero_ioc)
 		ioc->base_readl = &_base_readl_aero;
 	else
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index e7197150721f..c5743792bbfb 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -76,9 +76,9 @@
 #define MPT3SAS_DRIVER_NAME		"mpt3sas"
 #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
 #define MPT3SAS_DESCRIPTION	"LSI MPT Fusion SAS 3.0 Device Driver"
-#define MPT3SAS_DRIVER_VERSION		"33.100.00.00"
+#define MPT3SAS_DRIVER_VERSION		"33.101.00.00"
 #define MPT3SAS_MAJOR_VERSION		33
-#define MPT3SAS_MINOR_VERSION		100
+#define MPT3SAS_MINOR_VERSION		101
 #define MPT3SAS_BUILD_VERSION		0
 #define MPT3SAS_RELEASE_VERSION	00
 
@@ -367,6 +367,7 @@ struct mpt3sas_nvme_cmd {
 #define MPT3SAS_HIGH_IOPS_REPLY_QUEUES		8
 #define MPT3SAS_HIGH_IOPS_BATCH_COUNT		16
 #define MPT3SAS_GEN35_MAX_MSIX_QUEUES		128
+#define RDPQ_MAX_INDEX_IN_ONE_CHUNK		16
 
 /* OEM Specific Flags will come from OEM specific header files */
 struct Mpi2ManufacturingPage10_t {
@@ -1026,7 +1027,6 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @ir_firmware: IR firmware present
  * @bars: bitmask of BAR's that must be configured
  * @mask_interrupts: ignore interrupt
- * @dma_mask: used to set the consistent dma mask
  * @pci_access_mutex: Mutex to synchronize ioctl, sysfs show path and
  *			pci resource handling
  * @fault_reset_work_q_name: fw fault work queue
@@ -1064,6 +1064,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @thresh_hold: Max number of reply descriptors processed
  *				before updating Host Index
  * @drv_support_bitmap: driver's supported feature bit map
+ * @use_32bit_dma: Flag to use 32 bit consistent dma mask
  * @scsi_io_cb_idx: shost generated commands
  * @tm_cb_idx: task management commands
  * @scsih_cb_idx: scsih internal commands
@@ -1205,7 +1206,6 @@ struct MPT3SAS_ADAPTER {
 	u8		ir_firmware;
 	int		bars;
 	u8		mask_interrupts;
-	int		dma_mask;
 
 	/* fw fault handler */
 	char		fault_reset_work_q_name[20];
@@ -1254,6 +1254,7 @@ struct MPT3SAS_ADAPTER {
 	u8		high_iops_queues;
 	u32		drv_support_bitmap;
 	bool		enable_sdev_max_qd;
+	bool		use_32bit_dma;
 
 	/* internal commands, callback index */
 	u8		scsi_io_cb_idx;
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 7af9173c4925..5973eed94938 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -25,7 +25,7 @@ static const struct mvs_chip_info mvs_chips[] = {
 	[chip_1320] =	{ 2, 4, 0x800, 17, 64, 8,  9, &mvs_94xx_dispatch, },
 };
 
-struct device_attribute *mvst_host_attrs[];
+static struct device_attribute *mvst_host_attrs[];
 
 #define SOC_SAS_NUM 2
 
@@ -759,8 +759,6 @@ static DEVICE_ATTR(interrupt_coalescing,
 			 mvs_show_interrupt_coalescing,
 			 mvs_store_interrupt_coalescing);
 
-/* task handler */
-struct task_struct *mvs_th;
 static int __init mvs_init(void)
 {
 	int rc;
@@ -785,7 +783,7 @@ static void __exit mvs_exit(void)
 	sas_release_transport(mvs_stt);
 }
 
-struct device_attribute *mvst_host_attrs[] = {
+static struct device_attribute *mvst_host_attrs[] = {
 	&dev_attr_driver_version,
 	&dev_attr_interrupt_coalescing,
 	NULL,
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 7eb88fe1eb0b..aa9ae2ae8579 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -4652,7 +4652,7 @@ static int pmcraid_allocate_control_blocks(struct pmcraid_instance *pinstance)
 
 	for (i = 0; i < PMCRAID_MAX_CMD; i++) {
 		pinstance->cmd_list[i]->ioa_cb =
-			dma_pool_alloc(
+			dma_pool_zalloc(
 				pinstance->control_pool,
 				GFP_KERNEL,
 				&(pinstance->cmd_list[i]->ioa_cb_bus_addr));
@@ -4661,8 +4661,6 @@ static int pmcraid_allocate_control_blocks(struct pmcraid_instance *pinstance)
 			pmcraid_release_control_blocks(pinstance, i);
 			return -ENOMEM;
 		}
-		memset(pinstance->cmd_list[i]->ioa_cb, 0,
-			sizeof(struct pmcraid_control_block));
 	}
 	return 0;
 }
diff --git a/drivers/scsi/qedf/qedf.h b/drivers/scsi/qedf/qedf.h
index f3f399fe10c8..e163be8af965 100644
--- a/drivers/scsi/qedf/qedf.h
+++ b/drivers/scsi/qedf/qedf.h
@@ -355,6 +355,7 @@ struct qedf_ctx {
 #define QEDF_GRCDUMP_CAPTURE		4
 #define QEDF_IN_RECOVERY		5
 #define QEDF_DBG_STOP_IO		6
+#define QEDF_PROBING			8
 	unsigned long flags; /* Miscellaneous state flags */
 	int fipvlan_retries;
 	u8 num_queues;
@@ -387,7 +388,9 @@ struct qedf_ctx {
 #define QEDF_IO_WORK_MIN		64
 	mempool_t *io_mempool;
 	struct workqueue_struct *dpc_wq;
+	struct delayed_work recovery_work;
 	struct delayed_work grcdump_work;
+	struct delayed_work stag_work;
 
 	u32 slow_sge_ios;
 	u32 fast_sge_ios;
@@ -403,6 +406,7 @@ struct qedf_ctx {
 
 	u32 flogi_cnt;
 	u32 flogi_failed;
+	u32 flogi_pending;
 
 	/* Used for fc statistics */
 	struct mutex stats_mutex;
@@ -468,7 +472,7 @@ extern uint qedf_dump_frames;
 extern uint qedf_io_tracing;
 extern uint qedf_stop_io_on_error;
 extern uint qedf_link_down_tmo;
-#define QEDF_RETRY_DELAY_MAX		20 /* 2 seconds */
+#define QEDF_RETRY_DELAY_MAX		600 /* 60 seconds */
 extern bool qedf_retry_delay;
 extern uint qedf_debug;
 
diff --git a/drivers/scsi/qedf/qedf_els.c b/drivers/scsi/qedf/qedf_els.c
index 87e169dcebdb..542ba9454257 100644
--- a/drivers/scsi/qedf/qedf_els.c
+++ b/drivers/scsi/qedf/qedf_els.c
@@ -388,14 +388,10 @@ void qedf_restart_rport(struct qedf_rport *fcport)
 		mutex_lock(&lport->disc.disc_mutex);
 		/* Recreate the rport and log back in */
 		rdata = fc_rport_create(lport, port_id);
-		if (rdata) {
-			mutex_unlock(&lport->disc.disc_mutex);
+		mutex_unlock(&lport->disc.disc_mutex);
+		if (rdata)
 			fc_rport_login(rdata);
-			fcport->rdata = rdata;
-		} else {
-			mutex_unlock(&lport->disc.disc_mutex);
-			fcport->rdata = NULL;
-		}
+		fcport->rdata = rdata;
 	}
 	clear_bit(QEDF_RPORT_IN_RESET, &fcport->flags);
 }
diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index e749a2dcaad7..0f6a15c1a04b 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -1021,14 +1021,18 @@ qedf_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc_cmd)
 	atomic_inc(&fcport->ios_to_queue);
 
 	if (fcport->retry_delay_timestamp) {
+		/* Take fcport->rport_lock for resetting the delay_timestamp */
+		spin_lock_irqsave(&fcport->rport_lock, flags);
 		if (time_after(jiffies, fcport->retry_delay_timestamp)) {
 			fcport->retry_delay_timestamp = 0;
 		} else {
+			spin_unlock_irqrestore(&fcport->rport_lock, flags);
 			/* If retry_delay timer is active, flow off the ML */
 			rc = SCSI_MLQUEUE_TARGET_BUSY;
 			atomic_dec(&fcport->ios_to_queue);
 			goto exit_qcmd;
 		}
+		spin_unlock_irqrestore(&fcport->rport_lock, flags);
 	}
 
 	io_req = qedf_alloc_cmd(fcport, QEDF_SCSI_CMD);
@@ -1134,6 +1138,8 @@ void qedf_scsi_completion(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 	int refcount;
 	u16 scope, qualifier = 0;
 	u8 fw_residual_flag = 0;
+	unsigned long flags = 0;
+	u16 chk_scope = 0;
 
 	if (!io_req)
 		return;
@@ -1267,16 +1273,8 @@ void qedf_scsi_completion(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 				/* Lower 14 bits */
 				qualifier = fcp_rsp->retry_delay_timer & 0x3FFF;
 
-				if (qedf_retry_delay &&
-				    scope > 0 && qualifier > 0 &&
-				    qualifier <= 0x3FEF) {
-					/* Check we don't go over the max */
-					if (qualifier > QEDF_RETRY_DELAY_MAX)
-						qualifier =
-						    QEDF_RETRY_DELAY_MAX;
-					fcport->retry_delay_timestamp =
-					    jiffies + (qualifier * HZ / 10);
-				}
+				if (qedf_retry_delay)
+					chk_scope = 1;
 				/* Record stats */
 				if (io_req->cdb_status ==
 				    SAM_STAT_TASK_SET_FULL)
@@ -1287,6 +1285,36 @@ void qedf_scsi_completion(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 		}
 		if (io_req->fcp_resid)
 			scsi_set_resid(sc_cmd, io_req->fcp_resid);
+
+		if (chk_scope == 1) {
+			if ((scope == 1 || scope == 2) &&
+			    (qualifier > 0 && qualifier <= 0x3FEF)) {
+				/* Check we don't go over the max */
+				if (qualifier > QEDF_RETRY_DELAY_MAX) {
+					qualifier = QEDF_RETRY_DELAY_MAX;
+					QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_IO,
+						  "qualifier = %d\n",
+						  (fcp_rsp->retry_delay_timer &
+						  0x3FFF));
+				}
+				QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_IO,
+					  "Scope = %d and qualifier = %d",
+					  scope, qualifier);
+				/*  Take fcport->rport_lock to
+				 *  update the retry_delay_timestamp
+				 */
+				spin_lock_irqsave(&fcport->rport_lock, flags);
+				fcport->retry_delay_timestamp =
+					jiffies + (qualifier * HZ / 10);
+				spin_unlock_irqrestore(&fcport->rport_lock,
+						       flags);
+
+			} else {
+				QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_IO,
+					  "combination of scope = %d and qualifier = %d is not handled in qedf.\n",
+					  scope, qualifier);
+			}
+		}
 		break;
 	default:
 		QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_IO, "fcp_status=%d.\n",
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 5b19f5175c5c..36b1ca2dadbb 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -28,6 +28,8 @@ const struct qed_fcoe_ops *qed_ops;
 static int qedf_probe(struct pci_dev *pdev, const struct pci_device_id *id);
 static void qedf_remove(struct pci_dev *pdev);
 static void qedf_shutdown(struct pci_dev *pdev);
+static void qedf_schedule_recovery_handler(void *dev);
+static void qedf_recovery_handler(struct work_struct *work);
 
 /*
  * Driver module parameters.
@@ -282,6 +284,7 @@ static void qedf_flogi_resp(struct fc_seq *seq, struct fc_frame *fp,
 	else if (fc_frame_payload_op(fp) == ELS_LS_ACC) {
 		/* Set the source MAC we will use for FCoE traffic */
 		qedf_set_data_src_addr(qedf, fp);
+		qedf->flogi_pending = 0;
 	}
 
 	/* Complete flogi_compl so we can proceed to sending ADISCs */
@@ -307,6 +310,11 @@ static struct fc_seq *qedf_elsct_send(struct fc_lport *lport, u32 did,
 	 */
 	if (resp == fc_lport_flogi_resp) {
 		qedf->flogi_cnt++;
+		if (qedf->flogi_pending >= QEDF_FLOGI_RETRY_CNT) {
+			schedule_delayed_work(&qedf->stag_work, 2);
+			return NULL;
+		}
+		qedf->flogi_pending++;
 		return fc_elsct_send(lport, did, fp, op, qedf_flogi_resp,
 		    arg, timeout);
 	}
@@ -503,6 +511,32 @@ static void qedf_update_link_speed(struct qedf_ctx *qedf,
 	fc_host_supported_speeds(lport->host) = lport->link_supported_speeds;
 }
 
+static void qedf_bw_update(void *dev)
+{
+	struct qedf_ctx *qedf = (struct qedf_ctx *)dev;
+	struct qed_link_output link;
+
+	/* Get the latest status of the link */
+	qed_ops->common->get_link(qedf->cdev, &link);
+
+	if (test_bit(QEDF_UNLOADING, &qedf->flags)) {
+		QEDF_ERR(&qedf->dbg_ctx,
+			 "Ignore link update, driver getting unload.\n");
+		return;
+	}
+
+	if (link.link_up) {
+		if (atomic_read(&qedf->link_state) == QEDF_LINK_UP)
+			qedf_update_link_speed(qedf, &link);
+		else
+			QEDF_ERR(&qedf->dbg_ctx,
+				 "Ignore bw update, link is down.\n");
+
+	} else {
+		QEDF_ERR(&qedf->dbg_ctx, "link_up is not set.\n");
+	}
+}
+
 static void qedf_link_update(void *dev, struct qed_link_output *link)
 {
 	struct qedf_ctx *qedf = (struct qedf_ctx *)dev;
@@ -629,6 +663,8 @@ static u32 qedf_get_login_failures(void *cookie)
 static struct qed_fcoe_cb_ops qedf_cb_ops = {
 	{
 		.link_update = qedf_link_update,
+		.bw_update = qedf_bw_update,
+		.schedule_recovery_handler = qedf_schedule_recovery_handler,
 		.dcbx_aen = qedf_dcbx_handler,
 		.get_generic_tlv_data = qedf_get_generic_tlv_data,
 		.get_protocol_tlv_data = qedf_get_protocol_tlv_data,
@@ -850,6 +886,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport)
 
 	qedf = lport_priv(lport);
 
+	qedf->flogi_pending = 0;
 	/* For host reset, essentially do a soft link up/down */
 	atomic_set(&qedf->link_state, QEDF_LINK_DOWN);
 	QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC,
@@ -3153,7 +3190,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 {
 	int rc = -EINVAL;
 	struct fc_lport *lport;
-	struct qedf_ctx *qedf;
+	struct qedf_ctx *qedf = NULL;
 	struct Scsi_Host *host;
 	bool is_vf = false;
 	struct qed_ll2_params params;
@@ -3183,6 +3220,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 
 		/* Initialize qedf_ctx */
 		qedf = lport_priv(lport);
+		set_bit(QEDF_PROBING, &qedf->flags);
 		qedf->lport = lport;
 		qedf->ctlr.lp = lport;
 		qedf->pdev = pdev;
@@ -3197,6 +3235,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 		init_completion(&qedf->fipvlan_compl);
 		mutex_init(&qedf->stats_mutex);
 		mutex_init(&qedf->flush_mutex);
+		qedf->flogi_pending = 0;
 
 		QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_INFO,
 		   "QLogic FastLinQ FCoE Module qedf %s, "
@@ -3206,9 +3245,12 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 	} else {
 		/* Init pointers during recovery */
 		qedf = pci_get_drvdata(pdev);
+		set_bit(QEDF_PROBING, &qedf->flags);
 		lport = qedf->lport;
 	}
 
+	QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe started.\n");
+
 	host = lport->host;
 
 	/* Allocate mempool for qedf_io_work structs */
@@ -3227,6 +3269,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 	INIT_DELAYED_WORK(&qedf->link_update, qedf_handle_link_update);
 	INIT_DELAYED_WORK(&qedf->link_recovery, qedf_link_recovery);
 	INIT_DELAYED_WORK(&qedf->grcdump_work, qedf_wq_grcdump);
+	INIT_DELAYED_WORK(&qedf->stag_work, qedf_stag_change_work);
 	qedf->fipvlan_retries = qedf_fipvlan_retries;
 	/* Set a default prio in case DCBX doesn't converge */
 	if (qedf_default_prio > -1) {
@@ -3281,6 +3324,13 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 	}
 	qed_ops->common->update_pf_params(qedf->cdev, &qedf->pf_params);
 
+	/* Learn information crucial for qedf to progress */
+	rc = qed_ops->fill_dev_info(qedf->cdev, &qedf->dev_info);
+	if (rc) {
+		QEDF_ERR(&qedf->dbg_ctx, "Failed to fill dev info.\n");
+		goto err2;
+	}
+
 	/* Record BDQ producer doorbell addresses */
 	qedf->bdq_primary_prod = qedf->dev_info.primary_dbq_rq_addr;
 	qedf->bdq_secondary_prod = qedf->dev_info.secondary_bdq_rq_addr;
@@ -3466,6 +3516,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 		    qedf->lport->host->host_no);
 		qedf->dpc_wq = create_workqueue(host_buf);
 	}
+	INIT_DELAYED_WORK(&qedf->recovery_work, qedf_recovery_handler);
 
 	/*
 	 * GRC dump and sysfs parameters are not reaped during the recovery
@@ -3513,6 +3564,10 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 	else
 		fc_fabric_login(lport);
 
+	QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe done.\n");
+
+	clear_bit(QEDF_PROBING, &qedf->flags);
+
 	/* All good */
 	return 0;
 
@@ -3538,6 +3593,11 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 err1:
 	scsi_host_put(lport->host);
 err0:
+	if (qedf) {
+		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe done.\n");
+
+		clear_bit(QEDF_PROBING, &qedf->flags);
+	}
 	return rc;
 }
 
@@ -3687,11 +3747,25 @@ void qedf_get_protocol_tlv_data(void *dev, void *data)
 {
 	struct qedf_ctx *qedf = dev;
 	struct qed_mfw_tlv_fcoe *fcoe = data;
-	struct fc_lport *lport = qedf->lport;
-	struct Scsi_Host *host = lport->host;
-	struct fc_host_attrs *fc_host = shost_to_fc_host(host);
+	struct fc_lport *lport;
+	struct Scsi_Host *host;
+	struct fc_host_attrs *fc_host;
 	struct fc_host_statistics *hst;
 
+	if (!qedf) {
+		QEDF_ERR(NULL, "qedf is null.\n");
+		return;
+	}
+
+	if (test_bit(QEDF_PROBING, &qedf->flags)) {
+		QEDF_ERR(&qedf->dbg_ctx, "Function is still probing.\n");
+		return;
+	}
+
+	lport = qedf->lport;
+	host = lport->host;
+	fc_host = shost_to_fc_host(host);
+
 	/* Force a refresh of the fc_host stats including offload stats */
 	hst = qedf_fc_get_host_stats(host);
 
@@ -3762,11 +3836,64 @@ void qedf_get_protocol_tlv_data(void *dev, void *data)
 	fcoe->scsi_tsk_full = qedf->task_set_fulls;
 }
 
+/* Deferred work function to perform soft context reset on STAG change */
+void qedf_stag_change_work(struct work_struct *work)
+{
+	struct qedf_ctx *qedf =
+	    container_of(work, struct qedf_ctx, stag_work.work);
+
+	if (!qedf) {
+		QEDF_ERR(&qedf->dbg_ctx, "qedf is NULL");
+		return;
+	}
+	QEDF_ERR(&qedf->dbg_ctx, "Performing software context reset.\n");
+	qedf_ctx_soft_reset(qedf->lport);
+}
+
 static void qedf_shutdown(struct pci_dev *pdev)
 {
 	__qedf_remove(pdev, QEDF_MODE_NORMAL);
 }
 
+/*
+ * Recovery handler code
+ */
+static void qedf_schedule_recovery_handler(void *dev)
+{
+	struct qedf_ctx *qedf = dev;
+
+	QEDF_ERR(&qedf->dbg_ctx, "Recovery handler scheduled.\n");
+	schedule_delayed_work(&qedf->recovery_work, 0);
+}
+
+static void qedf_recovery_handler(struct work_struct *work)
+{
+	struct qedf_ctx *qedf =
+	    container_of(work, struct qedf_ctx, recovery_work.work);
+
+	if (test_and_set_bit(QEDF_IN_RECOVERY, &qedf->flags))
+		return;
+
+	/*
+	 * Call common_ops->recovery_prolog to allow the MFW to quiesce
+	 * any PCI transactions.
+	 */
+	qed_ops->common->recovery_prolog(qedf->cdev);
+
+	QEDF_ERR(&qedf->dbg_ctx, "Recovery work start.\n");
+	__qedf_remove(qedf->pdev, QEDF_MODE_RECOVERY);
+	/*
+	 * Reset link and dcbx to down state since we will not get a link down
+	 * event from the MFW but calling __qedf_remove will essentially be a
+	 * link down event.
+	 */
+	atomic_set(&qedf->link_state, QEDF_LINK_DOWN);
+	atomic_set(&qedf->dcbx, QEDF_DCBX_PENDING);
+	__qedf_probe(qedf->pdev, QEDF_MODE_RECOVERY);
+	clear_bit(QEDF_IN_RECOVERY, &qedf->flags);
+	QEDF_ERR(&qedf->dbg_ctx, "Recovery work complete.\n");
+}
+
 /* Generic TLV data callback */
 void qedf_get_generic_tlv_data(void *dev, struct qed_generic_tlvs *data)
 {
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index 1f4a5fb00a05..425e665ec08b 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -836,6 +836,11 @@ qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
 		return ERR_PTR(ret);
 	}
 
+	if (atomic_read(&qedi->link_state) != QEDI_LINK_UP) {
+		QEDI_WARN(&qedi->dbg_ctx, "qedi link down\n");
+		return ERR_PTR(-ENXIO);
+	}
+
 	ep = iscsi_create_endpoint(sizeof(struct qedi_endpoint));
 	if (!ep) {
 		QEDI_ERR(&qedi->dbg_ctx, "endpoint create fail\n");
@@ -870,12 +875,6 @@ qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
 		QEDI_ERR(&qedi->dbg_ctx, "Invalid endpoint\n");
 	}
 
-	if (atomic_read(&qedi->link_state) != QEDI_LINK_UP) {
-		QEDI_WARN(&qedi->dbg_ctx, "qedi link down\n");
-		ret = -ENXIO;
-		goto ep_conn_exit;
-	}
-
 	ret = qedi_alloc_sq(qedi, qedi_ep);
 	if (ret)
 		goto ep_conn_exit;
@@ -1001,7 +1000,8 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 	if (qedi_ep->state == EP_STATE_OFLDCONN_START)
 		goto ep_exit_recover;
 
-	flush_work(&qedi_ep->offload_work);
+	if (qedi_ep->state != EP_STATE_OFLDCONN_NONE)
+		flush_work(&qedi_ep->offload_work);
 
 	if (qedi_ep->conn) {
 		qedi_conn = qedi_ep->conn;
@@ -1065,6 +1065,9 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 		break;
 	}
 
+	if (!abrt_conn)
+		wait_delay += qedi->pf_params.iscsi_pf_params.two_msl_timer;
+
 	qedi_ep->state = EP_STATE_DISCONN_START;
 	ret = qedi_ops->destroy_conn(qedi->cdev, qedi_ep->handle, abrt_conn);
 	if (ret) {
@@ -1218,6 +1221,10 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data)
 	}
 
 	iscsi_cid = (u32)path_data->handle;
+	if (iscsi_cid >= qedi->max_active_conns) {
+		ret = -EINVAL;
+		goto set_path_exit;
+	}
 	qedi_ep = qedi->ep_tbl[iscsi_cid];
 	QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_INFO,
 		  "iscsi_cid=0x%x, qedi_ep=%p\n", iscsi_cid, qedi_ep);
diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
index b995b19865ca..4dd965860c98 100644
--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -28,6 +28,10 @@
 #include "qedi_gbl.h"
 #include "qedi_iscsi.h"
 
+static uint qedi_qed_debug;
+module_param(qedi_qed_debug, uint, 0644);
+MODULE_PARM_DESC(qedi_qed_debug, " QED debug level 0 (default)");
+
 static uint qedi_fw_debug;
 module_param(qedi_fw_debug, uint, 0644);
 MODULE_PARM_DESC(qedi_fw_debug, " Firmware debug level 0(default) to 3");
@@ -41,7 +45,7 @@ module_param(qedi_io_tracing, uint, 0644);
 MODULE_PARM_DESC(qedi_io_tracing,
 		 " Enable logging of SCSI requests/completions into trace buffer. (default off).");
 
-uint qedi_ll2_buf_size = 0x400;
+static uint qedi_ll2_buf_size = 0x400;
 module_param(qedi_ll2_buf_size, uint, 0644);
 MODULE_PARM_DESC(qedi_ll2_buf_size,
 		 "parameter to set ping packet size, default - 0x400, Jumbo packets - 0x2400.");
@@ -921,7 +925,7 @@ static void qedi_get_boot_tgt_info(struct nvm_iscsi_block *block,
 	ipv6_en = !!(block->generic.ctrl_flags &
 		     NVM_ISCSI_CFG_GEN_IPV6_ENABLED);
 
-	snprintf(tgt->iscsi_name, sizeof(tgt->iscsi_name), "%s\n",
+	snprintf(tgt->iscsi_name, sizeof(tgt->iscsi_name), "%s",
 		 block->target[index].target_name.byte);
 
 	tgt->ipv6_en = ipv6_en;
@@ -1360,7 +1364,7 @@ static int qedi_request_msix_irq(struct qedi_ctx *qedi)
 	u16 idx;
 
 	cpu = cpumask_first(cpu_online_mask);
-	for (i = 0; i < MIN_NUM_CPUS_MSIX(qedi); i++) {
+	for (i = 0; i < qedi->int_info.msix_cnt; i++) {
 		idx = i * qedi->dev_info.common.num_hwfns +
 			  qedi_ops->common->get_affin_hwfn_idx(qedi->cdev);
 
@@ -2422,7 +2426,6 @@ static int __qedi_probe(struct pci_dev *pdev, int mode)
 {
 	struct qedi_ctx *qedi;
 	struct qed_ll2_params params;
-	u32 dp_module = 0;
 	u8 dp_level = 0;
 	bool is_vf = false;
 	char host_buf[16];
@@ -2445,7 +2448,7 @@ static int __qedi_probe(struct pci_dev *pdev, int mode)
 
 	memset(&qed_params, 0, sizeof(qed_params));
 	qed_params.protocol = QED_PROTOCOL_ISCSI;
-	qed_params.dp_module = dp_module;
+	qed_params.dp_module = qedi_qed_debug;
 	qed_params.dp_level = dp_level;
 	qed_params.is_vf = is_vf;
 	qedi->cdev = qedi_ops->common->probe(pdev, &qed_params);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 3337cd341d21..441a45349349 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -526,7 +526,7 @@ static struct pci_device_id qla1280_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
 
-DEFINE_MUTEX(qla1280_firmware_mutex);
+static DEFINE_MUTEX(qla1280_firmware_mutex);
 
 struct qla_fw {
 	char *fwname;
@@ -535,7 +535,7 @@ struct qla_fw {
 
 #define QL_NUM_FW_IMAGES 3
 
-struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
+static struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
 	{"qlogic/1040.bin",  NULL},	/* image 0 */
 	{"qlogic/1280.bin",  NULL},	/* image 1 */
 	{"qlogic/12160.bin", NULL},	/* image 2 */
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 97cabd7e0014..4cfebf34ad7c 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -26,7 +26,8 @@ qla2x00_sysfs_read_fw_dump(struct file *filp, struct kobject *kobj,
 	struct qla_hw_data *ha = vha->hw;
 	int rval = 0;
 
-	if (!(ha->fw_dump_reading || ha->mctp_dump_reading))
+	if (!(ha->fw_dump_reading || ha->mctp_dump_reading ||
+	      ha->mpi_fw_dump_reading))
 		return 0;
 
 	mutex_lock(&ha->optrom_mutex);
@@ -42,6 +43,10 @@ qla2x00_sysfs_read_fw_dump(struct file *filp, struct kobject *kobj,
 	} else if (ha->mctp_dumped && ha->mctp_dump_reading) {
 		rval = memory_read_from_buffer(buf, count, &off, ha->mctp_dump,
 		    MCTP_DUMP_SIZE);
+	} else if (ha->mpi_fw_dumped && ha->mpi_fw_dump_reading) {
+		rval = memory_read_from_buffer(buf, count, &off,
+					       ha->mpi_fw_dump,
+					       ha->mpi_fw_dump_len);
 	} else if (ha->fw_dump_reading) {
 		rval = memory_read_from_buffer(buf, count, &off, ha->fw_dump,
 					ha->fw_dump_len);
@@ -103,7 +108,6 @@ qla2x00_sysfs_write_fw_dump(struct file *filp, struct kobject *kobj,
 			qla82xx_set_reset_owner(vha);
 			qla8044_idc_unlock(ha);
 		} else {
-			ha->fw_dump_mpi = 1;
 			qla2x00_system_error(vha);
 		}
 		break;
@@ -137,6 +141,22 @@ qla2x00_sysfs_write_fw_dump(struct file *filp, struct kobject *kobj,
 			    vha->host_no);
 		}
 		break;
+	case 8:
+		if (!ha->mpi_fw_dump_reading)
+			break;
+		ql_log(ql_log_info, vha, 0x70e7,
+		       "MPI firmware dump cleared on (%ld).\n", vha->host_no);
+		ha->mpi_fw_dump_reading = 0;
+		ha->mpi_fw_dumped = 0;
+		break;
+	case 9:
+		if (ha->mpi_fw_dumped && !ha->mpi_fw_dump_reading) {
+			ha->mpi_fw_dump_reading = 1;
+			ql_log(ql_log_info, vha, 0x70e8,
+			       "Raw MPI firmware dump ready for read on (%ld).\n",
+			       vha->host_no);
+		}
+		break;
 	}
 	return count;
 }
@@ -706,7 +726,8 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 		scsi_unblock_requests(vha->host);
 		break;
 	case 0x2025d:
-		if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha))
+		if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
+		    !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
 			return -EPERM;
 
 		ql_log(ql_log_info, vha, 0x706f,
@@ -724,6 +745,8 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 			qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP);
 			qla83xx_idc_unlock(vha, 0);
 			break;
+		} else if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+			qla27xx_reset_mpi(vha);
 		} else {
 			/* Make sure FC side is not in reset */
 			WARN_ON_ONCE(qla2x00_wait_for_hba_online(vha) !=
@@ -737,6 +760,7 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 			scsi_unblock_requests(vha->host);
 			break;
 		}
+		break;
 	case 0x2025e:
 		if (!IS_P3P_TYPE(ha) || vha != base_vha) {
 			ql_log(ql_log_info, vha, 0x7071,
@@ -3031,11 +3055,11 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
 	    test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags))
 		msleep(1000);
 
-	qla_nvme_delete(vha);
 
 	qla24xx_disable_vp(vha);
 	qla2x00_wait_for_sess_deletion(vha);
 
+	qla_nvme_delete(vha);
 	vha->flags.delete_progress = 1;
 
 	qlt_remove_target(ha, vha);
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index bf1e98f11990..b23f6f621f74 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -778,16 +778,16 @@ qla2300_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 	if (rval == QLA_SUCCESS) {
 		dmp_reg = &reg->flash_address;
-		for (cnt = 0; cnt < sizeof(fw->pbiu_reg) / 2; cnt++, dmp_reg++)
+		for (cnt = 0; cnt < ARRAY_SIZE(fw->pbiu_reg); cnt++, dmp_reg++)
 			fw->pbiu_reg[cnt] = htons(RD_REG_WORD(dmp_reg));
 
 		dmp_reg = &reg->u.isp2300.req_q_in;
-		for (cnt = 0; cnt < sizeof(fw->risc_host_reg) / 2;
+		for (cnt = 0; cnt < ARRAY_SIZE(fw->risc_host_reg);
 		    cnt++, dmp_reg++)
 			fw->risc_host_reg[cnt] = htons(RD_REG_WORD(dmp_reg));
 
 		dmp_reg = &reg->u.isp2300.mailbox0;
-		for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2;
+		for (cnt = 0; cnt < ARRAY_SIZE(fw->mailbox_reg);
 		    cnt++, dmp_reg++)
 			fw->mailbox_reg[cnt] = htons(RD_REG_WORD(dmp_reg));
 
@@ -799,7 +799,7 @@ qla2300_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 		WRT_REG_WORD(&reg->ctrl_status, 0x00);
 		dmp_reg = &reg->risc_hw;
-		for (cnt = 0; cnt < sizeof(fw->risc_hdw_reg) / 2;
+		for (cnt = 0; cnt < ARRAY_SIZE(fw->risc_hdw_reg);
 		    cnt++, dmp_reg++)
 			fw->risc_hdw_reg[cnt] = htons(RD_REG_WORD(dmp_reg));
 
@@ -860,12 +860,12 @@ qla2300_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 	/* Get RISC SRAM. */
 	if (rval == QLA_SUCCESS)
 		rval = qla2xxx_dump_ram(ha, 0x800, fw->risc_ram,
-		    sizeof(fw->risc_ram) / 2, &nxt);
+					ARRAY_SIZE(fw->risc_ram), &nxt);
 
 	/* Get stack SRAM. */
 	if (rval == QLA_SUCCESS)
 		rval = qla2xxx_dump_ram(ha, 0x10000, fw->stack_ram,
-		    sizeof(fw->stack_ram) / 2, &nxt);
+					ARRAY_SIZE(fw->stack_ram), &nxt);
 
 	/* Get data SRAM. */
 	if (rval == QLA_SUCCESS)
@@ -944,7 +944,7 @@ qla2100_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 	}
 	if (rval == QLA_SUCCESS) {
 		dmp_reg = &reg->flash_address;
-		for (cnt = 0; cnt < sizeof(fw->pbiu_reg) / 2; cnt++, dmp_reg++)
+		for (cnt = 0; cnt < ARRAY_SIZE(fw->pbiu_reg); cnt++, dmp_reg++)
 			fw->pbiu_reg[cnt] = htons(RD_REG_WORD(dmp_reg));
 
 		dmp_reg = &reg->u.isp2100.mailbox0;
@@ -956,12 +956,12 @@ qla2100_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 		}
 
 		dmp_reg = &reg->u.isp2100.unused_2[0];
-		for (cnt = 0; cnt < sizeof(fw->dma_reg) / 2; cnt++, dmp_reg++)
+		for (cnt = 0; cnt < ARRAY_SIZE(fw->dma_reg); cnt++, dmp_reg++)
 			fw->dma_reg[cnt] = htons(RD_REG_WORD(dmp_reg));
 
 		WRT_REG_WORD(&reg->ctrl_status, 0x00);
 		dmp_reg = &reg->risc_hw;
-		for (cnt = 0; cnt < sizeof(fw->risc_hdw_reg) / 2; cnt++, dmp_reg++)
+		for (cnt = 0; cnt < ARRAY_SIZE(fw->risc_hdw_reg); cnt++, dmp_reg++)
 			fw->risc_hdw_reg[cnt] = htons(RD_REG_WORD(dmp_reg));
 
 		WRT_REG_WORD(&reg->pcr, 0x2000);
@@ -1041,7 +1041,7 @@ qla2100_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
  		WRT_MAILBOX_REG(ha, reg, 0, MBC_READ_RAM_WORD);
 		clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
 	}
-	for (cnt = 0; cnt < sizeof(fw->risc_ram) / 2 && rval == QLA_SUCCESS;
+	for (cnt = 0; cnt < ARRAY_SIZE(fw->risc_ram) && rval == QLA_SUCCESS;
 	    cnt++, risc_address++) {
  		WRT_MAILBOX_REG(ha, reg, 1, risc_address);
 		WRT_REG_WORD(&reg->hccr, HCCR_SET_HOST_INT);
@@ -1145,7 +1145,7 @@ qla24xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 	/* Host interface registers. */
 	dmp_reg = &reg->flash_addr;
-	for (cnt = 0; cnt < sizeof(fw->host_reg) / 4; cnt++, dmp_reg++)
+	for (cnt = 0; cnt < ARRAY_SIZE(fw->host_reg); cnt++, dmp_reg++)
 		fw->host_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg));
 
 	/* Disable interrupts. */
@@ -1178,7 +1178,7 @@ qla24xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 	/* Mailbox registers. */
 	mbx_reg = &reg->mailbox0;
-	for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++, mbx_reg++)
+	for (cnt = 0; cnt < ARRAY_SIZE(fw->mailbox_reg); cnt++, mbx_reg++)
 		fw->mailbox_reg[cnt] = htons(RD_REG_WORD(mbx_reg));
 
 	/* Transfer sequence registers. */
@@ -1421,7 +1421,7 @@ qla25xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 	/* Host interface registers. */
 	dmp_reg = &reg->flash_addr;
-	for (cnt = 0; cnt < sizeof(fw->host_reg) / 4; cnt++, dmp_reg++)
+	for (cnt = 0; cnt < ARRAY_SIZE(fw->host_reg); cnt++, dmp_reg++)
 		fw->host_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg));
 
 	/* Disable interrupts. */
@@ -1470,7 +1470,7 @@ qla25xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 	/* Mailbox registers. */
 	mbx_reg = &reg->mailbox0;
-	for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++, mbx_reg++)
+	for (cnt = 0; cnt < ARRAY_SIZE(fw->mailbox_reg); cnt++, mbx_reg++)
 		fw->mailbox_reg[cnt] = htons(RD_REG_WORD(mbx_reg));
 
 	/* Transfer sequence registers. */
@@ -1745,7 +1745,7 @@ qla81xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 	/* Host interface registers. */
 	dmp_reg = &reg->flash_addr;
-	for (cnt = 0; cnt < sizeof(fw->host_reg) / 4; cnt++, dmp_reg++)
+	for (cnt = 0; cnt < ARRAY_SIZE(fw->host_reg); cnt++, dmp_reg++)
 		fw->host_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg));
 
 	/* Disable interrupts. */
@@ -1794,7 +1794,7 @@ qla81xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 	/* Mailbox registers. */
 	mbx_reg = &reg->mailbox0;
-	for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++, mbx_reg++)
+	for (cnt = 0; cnt < ARRAY_SIZE(fw->mailbox_reg); cnt++, mbx_reg++)
 		fw->mailbox_reg[cnt] = htons(RD_REG_WORD(mbx_reg));
 
 	/* Transfer sequence registers. */
@@ -2093,7 +2093,7 @@ qla83xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 	/* Host interface registers. */
 	dmp_reg = &reg->flash_addr;
-	for (cnt = 0; cnt < sizeof(fw->host_reg) / 4; cnt++, dmp_reg++)
+	for (cnt = 0; cnt < ARRAY_SIZE(fw->host_reg); cnt++, dmp_reg++)
 		fw->host_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg));
 
 	/* Disable interrupts. */
@@ -2142,7 +2142,7 @@ qla83xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 	/* Mailbox registers. */
 	mbx_reg = &reg->mailbox0;
-	for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++, mbx_reg++)
+	for (cnt = 0; cnt < ARRAY_SIZE(fw->mailbox_reg); cnt++, mbx_reg++)
 		fw->mailbox_reg[cnt] = htons(RD_REG_WORD(mbx_reg));
 
 	/* Transfer sequence registers. */
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 47c7a56438b5..172ea4e5887d 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3223,6 +3223,7 @@ struct isp_operations {
 		uint32_t);
 
 	void (*fw_dump) (struct scsi_qla_host *, int);
+	void (*mpi_fw_dump)(struct scsi_qla_host *, int);
 
 	int (*beacon_on) (struct scsi_qla_host *);
 	int (*beacon_off) (struct scsi_qla_host *);
@@ -3748,6 +3749,11 @@ struct qlt_hw_data {
 
 #define LEAK_EXCHG_THRESH_HOLD_PERCENT 75	/* 75 percent */
 
+struct qla_hw_data_stat {
+	u32 num_fw_dump;
+	u32 num_mpi_reset;
+};
+
 /*
  * Qlogic host adapter specific data structure.
 */
@@ -4230,7 +4236,6 @@ struct qla_hw_data {
 	uint32_t	fw_dump_len;
 	u32		fw_dump_alloc_len;
 	bool		fw_dumped;
-	bool		fw_dump_mpi;
 	unsigned long	fw_dump_cap_flags;
 #define RISC_PAUSE_CMPL		0
 #define DMA_SHUTDOWN_CMPL	1
@@ -4241,6 +4246,10 @@ struct qla_hw_data {
 #define ISP_MBX_RDY		6
 #define ISP_SOFT_RESET_CMPL	7
 	int		fw_dump_reading;
+	void		*mpi_fw_dump;
+	u32		mpi_fw_dump_len;
+	unsigned int	mpi_fw_dump_reading:1;
+	unsigned int	mpi_fw_dumped:1;
 	int		prev_minidump_failed;
 	dma_addr_t	eft_dma;
 	void		*eft;
@@ -4454,6 +4463,8 @@ struct qla_hw_data {
 	uint16_t last_zio_threshold;
 
 #define DEFAULT_ZIO_THRESHOLD 5
+
+	struct qla_hw_data_stat stat;
 };
 
 struct active_regions {
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 1b93f5b4d77d..b20c5fa122fb 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -173,6 +173,7 @@ extern int ql2xenablemsix;
 extern int qla2xuseresexchforels;
 extern int ql2xexlogins;
 extern int ql2xdifbundlinginternalbuffers;
+extern int ql2xfulldump_on_mpifail;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -645,6 +646,7 @@ extern void qla82xx_fw_dump(scsi_qla_host_t *, int);
 extern void qla8044_fw_dump(scsi_qla_host_t *, int);
 
 extern void qla27xx_fwdump(scsi_qla_host_t *, int);
+extern void qla27xx_mpi_fwdump(scsi_qla_host_t *, int);
 extern ulong qla27xx_fwdt_calculate_dump_size(struct scsi_qla_host *, void *);
 extern int qla27xx_fwdt_template_valid(void *);
 extern ulong qla27xx_fwdt_template_size(void *);
@@ -933,5 +935,6 @@ extern void qla24xx_process_purex_list(struct purex_list *);
 
 /* nvme.c */
 void qla_nvme_unregister_remote_port(struct fc_port *fcport);
+void qla27xx_reset_mpi(scsi_qla_host_t *vha);
 void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct event_arg *ea);
 #endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index caa6b840e459..4beb15ca4761 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3339,6 +3339,8 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
 				    dump_size / 1024);
 
 				if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+					ha->mpi_fw_dump = (char *)fw_dump +
+						ha->fwdt[1].dump_size;
 					mutex_unlock(&ha->optrom_mutex);
 					return;
 				}
@@ -5079,6 +5081,54 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
 	return (rval);
 }
 
+static int qla2x00_configure_n2n_loop(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+	unsigned long flags;
+	fc_port_t *fcport;
+	int rval;
+
+	if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) {
+		/* borrowing */
+		u32 *bp, sz;
+
+		memset(ha->init_cb, 0, ha->init_cb_size);
+		sz = min_t(int, sizeof(struct els_plogi_payload),
+			   ha->init_cb_size);
+		rval = qla24xx_get_port_login_templ(vha, ha->init_cb_dma,
+						    ha->init_cb, sz);
+		if (rval == QLA_SUCCESS) {
+			__be32 *q = &ha->plogi_els_payld.data[0];
+
+			bp = (uint32_t *)ha->init_cb;
+			cpu_to_be32_array(q, bp, sz / 4);
+			memcpy(bp, q, sizeof(ha->plogi_els_payld.data));
+		} else {
+			ql_dbg(ql_dbg_init, vha, 0x00d1,
+			       "PLOGI ELS param read fail.\n");
+			goto skip_login;
+		}
+	}
+
+	list_for_each_entry(fcport, &vha->vp_fcports, list) {
+		if (fcport->n2n_flag) {
+			qla24xx_fcport_handle_login(vha, fcport);
+			return QLA_SUCCESS;
+		}
+	}
+
+skip_login:
+	spin_lock_irqsave(&vha->work_lock, flags);
+	vha->scan.scan_retry++;
+	spin_unlock_irqrestore(&vha->work_lock, flags);
+
+	if (vha->scan.scan_retry < MAX_SCAN_RETRIES) {
+		set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
+		set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
+	}
+	return QLA_FUNCTION_FAILED;
+}
+
 /*
  * qla2x00_configure_local_loop
  *	Updates Fibre Channel Device Database with local loop devices.
@@ -5096,7 +5146,6 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 	int		found_devs;
 	int		found;
 	fc_port_t	*fcport, *new_fcport;
-
 	uint16_t	index;
 	uint16_t	entries;
 	struct gid_list_info *gid;
@@ -5106,47 +5155,8 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 	unsigned long flags;
 
 	/* Inititae N2N login. */
-	if (N2N_TOPO(ha)) {
-		if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) {
-			/* borrowing */
-			u32 *bp, sz;
-
-			memset(ha->init_cb, 0, ha->init_cb_size);
-			sz = min_t(int, sizeof(struct els_plogi_payload),
-			    ha->init_cb_size);
-			rval = qla24xx_get_port_login_templ(vha,
-			    ha->init_cb_dma, (void *)ha->init_cb, sz);
-			if (rval == QLA_SUCCESS) {
-				__be32 *q = &ha->plogi_els_payld.data[0];
-
-				bp = (uint32_t *)ha->init_cb;
-				cpu_to_be32_array(q, bp, sz / 4);
-
-				memcpy(bp, q, sizeof(ha->plogi_els_payld.data));
-			} else {
-				ql_dbg(ql_dbg_init, vha, 0x00d1,
-				    "PLOGI ELS param read fail.\n");
-				goto skip_login;
-			}
-		}
-
-		list_for_each_entry(fcport, &vha->vp_fcports, list) {
-			if (fcport->n2n_flag) {
-				qla24xx_fcport_handle_login(vha, fcport);
-				return QLA_SUCCESS;
-			}
-		}
-skip_login:
-		spin_lock_irqsave(&vha->work_lock, flags);
-		vha->scan.scan_retry++;
-		spin_unlock_irqrestore(&vha->work_lock, flags);
-
-		if (vha->scan.scan_retry < MAX_SCAN_RETRIES) {
-			set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
-			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
-		}
-		return QLA_FUNCTION_FAILED;
-	}
+	if (N2N_TOPO(ha))
+		return qla2x00_configure_n2n_loop(vha);
 
 	found_devs = 0;
 	new_fcport = NULL;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 8a78d395bbc8..4d9ec7ee59cc 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -756,6 +756,39 @@ qla2x00_find_fcport_by_nportid(scsi_qla_host_t *vha, port_id_t *id,
 	return NULL;
 }
 
+/* Shall be called only on supported adapters. */
+static void
+qla27xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb)
+{
+	struct qla_hw_data *ha = vha->hw;
+	bool reset_isp_needed = 0;
+
+	ql_log(ql_log_warn, vha, 0x02f0,
+	       "MPI Heartbeat stop. MPI reset is%s needed. "
+	       "MB0[%xh] MB1[%xh] MB2[%xh] MB3[%xh]\n",
+	       mb[0] & BIT_8 ? "" : " not",
+	       mb[0], mb[1], mb[2], mb[3]);
+
+	if ((mb[1] & BIT_8) == 0)
+		return;
+
+	ql_log(ql_log_warn, vha, 0x02f1,
+	       "MPI Heartbeat stop. FW dump needed\n");
+
+	if (ql2xfulldump_on_mpifail) {
+		ha->isp_ops->fw_dump(vha, 1);
+		reset_isp_needed = 1;
+	}
+
+	ha->isp_ops->mpi_fw_dump(vha, 1);
+
+	if (reset_isp_needed) {
+		vha->hw->flags.fw_init_done = 0;
+		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		qla2xxx_wake_dpc(vha);
+	}
+}
+
 /**
  * qla2x00_async_event() - Process aynchronous events.
  * @vha: SCSI driver HA context
@@ -871,9 +904,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 			    "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n ",
 			    mb[1], mb[2], mb[3]);
 
-		ha->fw_dump_mpi =
-		    (IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
-		    RD_REG_WORD(&reg24->mailbox7) & BIT_8;
+		if ((IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
+		    RD_REG_WORD(&reg24->mailbox7) & BIT_8)
+			ha->isp_ops->mpi_fw_dump(vha, 1);
 		ha->isp_ops->fw_dump(vha, 1);
 		ha->flags.fw_init_done = 0;
 		QLA_FW_STOPPED(ha);
@@ -1374,20 +1407,7 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 
 	case MBA_IDC_AEN:
 		if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
-			ha->flags.fw_init_done = 0;
-			ql_log(ql_log_warn, vha, 0xffff,
-			    "MPI Heartbeat stop. Chip reset needed. MB0[%xh] MB1[%xh] MB2[%xh] MB3[%xh]\n",
-			    mb[0], mb[1], mb[2], mb[3]);
-
-			if ((mb[1] & BIT_8) ||
-			    (mb[2] & BIT_8)) {
-				ql_log(ql_log_warn, vha, 0xd013,
-				    "MPI Heartbeat stop. FW dump needed\n");
-				ha->fw_dump_mpi = 1;
-				ha->isp_ops->fw_dump(vha, 1);
-			}
-			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
-			qla2xxx_wake_dpc(vha);
+			qla27xx_handle_8200_aen(vha, mb);
 		} else if (IS_QLA83XX(ha)) {
 			mb[4] = RD_REG_WORD(&reg24->mailbox4);
 			mb[5] = RD_REG_WORD(&reg24->mailbox5);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 4ed90437e8c4..d6c991bd1bde 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3153,7 +3153,7 @@ qla24xx_abort_command(srb_t *sp)
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x108c,
 	    "Entered %s.\n", __func__);
 
-	if (vha->flags.qpairs_available && sp->qpair)
+	if (sp->qpair)
 		req = sp->qpair->req;
 	else
 		return QLA_FUNCTION_FAILED;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index d190db5ea7d9..63e20c40e977 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -35,6 +35,11 @@ static int apidev_major;
  */
 struct kmem_cache *srb_cachep;
 
+int ql2xfulldump_on_mpifail;
+module_param(ql2xfulldump_on_mpifail, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ql2xfulldump_on_mpifail,
+		 "Set this to take full dump on MPI hang.");
+
 /*
  * CT6 CTX allocation cache
  */
@@ -2518,6 +2523,7 @@ static struct isp_operations qla27xx_isp_ops = {
 	.read_nvram		= NULL,
 	.write_nvram		= NULL,
 	.fw_dump		= qla27xx_fwdump,
+	.mpi_fw_dump		= qla27xx_mpi_fwdump,
 	.beacon_on		= qla24xx_beacon_on,
 	.beacon_off		= qla24xx_beacon_off,
 	.beacon_blink		= qla83xx_beacon_blink,
@@ -3732,6 +3738,13 @@ qla2x00_remove_one(struct pci_dev *pdev)
 	}
 	qla2x00_wait_for_hba_ready(base_vha);
 
+	/*
+	 * if UNLOADING flag is already set, then continue unload,
+	 * where it was set first.
+	 */
+	if (test_and_set_bit(UNLOADING, &base_vha->dpc_flags))
+		return;
+
 	if (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha) ||
 	    IS_QLA28XX(ha)) {
 		if (ha->flags.fw_started)
@@ -3750,15 +3763,6 @@ qla2x00_remove_one(struct pci_dev *pdev)
 
 	qla2x00_wait_for_sess_deletion(base_vha);
 
-	/*
-	 * if UNLOAD flag is already set, then continue unload,
-	 * where it was set first.
-	 */
-	if (test_bit(UNLOADING, &base_vha->dpc_flags))
-		return;
-
-	set_bit(UNLOADING, &base_vha->dpc_flags);
-
 	qla_nvme_delete(base_vha);
 
 	dma_free_coherent(&ha->pdev->dev,
@@ -4864,6 +4868,9 @@ qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
 	struct qla_work_evt *e;
 	uint8_t bail;
 
+	if (test_bit(UNLOADING, &vha->dpc_flags))
+		return NULL;
+
 	QLA_VHA_MARK_BUSY(vha, bail);
 	if (bail)
 		return NULL;
@@ -6628,13 +6635,6 @@ qla2x00_disable_board_on_pci_error(struct work_struct *work)
 	struct pci_dev *pdev = ha->pdev;
 	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 
-	/*
-	 * if UNLOAD flag is already set, then continue unload,
-	 * where it was set first.
-	 */
-	if (test_bit(UNLOADING, &base_vha->dpc_flags))
-		return;
-
 	ql_log(ql_log_warn, base_vha, 0x015b,
 	    "Disabling adapter.\n");
 
@@ -6645,9 +6645,14 @@ qla2x00_disable_board_on_pci_error(struct work_struct *work)
 		return;
 	}
 
-	qla2x00_wait_for_sess_deletion(base_vha);
+	/*
+	 * if UNLOADING flag is already set, then continue unload,
+	 * where it was set first.
+	 */
+	if (test_and_set_bit(UNLOADING, &base_vha->dpc_flags))
+		return;
 
-	set_bit(UNLOADING, &base_vha->dpc_flags);
+	qla2x00_wait_for_sess_deletion(base_vha);
 
 	qla2x00_delete_all_vps(ha, base_vha);
 
diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c
index 6aeb1c3fb7a8..342363862434 100644
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -12,6 +12,33 @@
 #define IOBASE(vha)	IOBAR(ISPREG(vha))
 #define INVALID_ENTRY ((struct qla27xx_fwdt_entry *)0xffffffffffffffffUL)
 
+/* hardware_lock assumed held. */
+static void
+qla27xx_write_remote_reg(struct scsi_qla_host *vha,
+			 u32 addr, u32 data)
+{
+	char *reg = (char *)ISPREG(vha);
+
+	ql_dbg(ql_dbg_misc, vha, 0xd300,
+	       "%s: addr/data = %xh/%xh\n", __func__, addr, data);
+
+	WRT_REG_DWORD(reg + IOBASE(vha), 0x40);
+	WRT_REG_DWORD(reg + 0xc4, data);
+	WRT_REG_DWORD(reg + 0xc0, addr);
+}
+
+void
+qla27xx_reset_mpi(scsi_qla_host_t *vha)
+{
+	ql_dbg(ql_dbg_misc + ql_dbg_verbose, vha, 0xd301,
+	       "Entered %s.\n", __func__);
+
+	qla27xx_write_remote_reg(vha, 0x104050, 0x40004);
+	qla27xx_write_remote_reg(vha, 0x10405c, 0x4);
+
+	vha->hw->stat.num_mpi_reset++;
+}
+
 static inline void
 qla27xx_insert16(uint16_t value, void *buf, ulong *len)
 {
@@ -997,6 +1024,62 @@ qla27xx_fwdt_template_valid(void *p)
 	return true;
 }
 
+void
+qla27xx_mpi_fwdump(scsi_qla_host_t *vha, int hardware_locked)
+{
+	ulong flags = 0;
+	bool need_mpi_reset = 1;
+
+#ifndef __CHECKER__
+	if (!hardware_locked)
+		spin_lock_irqsave(&vha->hw->hardware_lock, flags);
+#endif
+	if (!vha->hw->mpi_fw_dump) {
+		ql_log(ql_log_warn, vha, 0x02f3, "-> mpi_fwdump no buffer\n");
+	} else if (vha->hw->mpi_fw_dumped) {
+		ql_log(ql_log_warn, vha, 0x02f4,
+		       "-> MPI firmware already dumped (%p) -- ignoring request\n",
+		       vha->hw->mpi_fw_dump);
+	} else {
+		struct fwdt *fwdt = &vha->hw->fwdt[1];
+		ulong len;
+		void *buf = vha->hw->mpi_fw_dump;
+
+		ql_log(ql_log_warn, vha, 0x02f5, "-> fwdt1 running...\n");
+		if (!fwdt->template) {
+			ql_log(ql_log_warn, vha, 0x02f6,
+			       "-> fwdt1 no template\n");
+			goto bailout;
+		}
+		len = qla27xx_execute_fwdt_template(vha, fwdt->template, buf);
+		if (len == 0) {
+			goto bailout;
+		} else if (len != fwdt->dump_size) {
+			ql_log(ql_log_warn, vha, 0x02f7,
+			       "-> fwdt1 fwdump residual=%+ld\n",
+			       fwdt->dump_size - len);
+		} else {
+			need_mpi_reset = 0;
+		}
+
+		vha->hw->mpi_fw_dump_len = len;
+		vha->hw->mpi_fw_dumped = 1;
+
+		ql_log(ql_log_warn, vha, 0x02f8,
+		       "-> MPI firmware dump saved to buffer (%lu/%p)\n",
+		       vha->host_no, vha->hw->mpi_fw_dump);
+		qla2x00_post_uevent_work(vha, QLA_UEVENT_CODE_FW_DUMP);
+	}
+
+bailout:
+	if (need_mpi_reset)
+		qla27xx_reset_mpi(vha);
+#ifndef __CHECKER__
+	if (!hardware_locked)
+		spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
+#endif
+}
+
 void
 qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
 {
@@ -1015,30 +1098,25 @@ qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
 		    vha->hw->fw_dump);
 	} else {
 		struct fwdt *fwdt = vha->hw->fwdt;
-		uint j;
 		ulong len;
 		void *buf = vha->hw->fw_dump;
-		uint count = vha->hw->fw_dump_mpi ? 2 : 1;
-
-		for (j = 0; j < count; j++, fwdt++, buf += len) {
-			ql_log(ql_log_warn, vha, 0xd011,
-			    "-> fwdt%u running...\n", j);
-			if (!fwdt->template) {
-				ql_log(ql_log_warn, vha, 0xd012,
-				    "-> fwdt%u no template\n", j);
-				break;
-			}
-			len = qla27xx_execute_fwdt_template(vha,
-			    fwdt->template, buf);
-			if (len == 0) {
-				goto bailout;
-			} else if (len != fwdt->dump_size) {
-				ql_log(ql_log_warn, vha, 0xd013,
-				    "-> fwdt%u fwdump residual=%+ld\n",
-				    j, fwdt->dump_size - len);
-			}
+
+		ql_log(ql_log_warn, vha, 0xd011, "-> fwdt0 running...\n");
+		if (!fwdt->template) {
+			ql_log(ql_log_warn, vha, 0xd012,
+			       "-> fwdt0 no template\n");
+			goto bailout;
 		}
-		vha->hw->fw_dump_len = buf - (void *)vha->hw->fw_dump;
+		len = qla27xx_execute_fwdt_template(vha, fwdt->template, buf);
+		if (len == 0) {
+			goto bailout;
+		} else if (len != fwdt->dump_size) {
+			ql_log(ql_log_warn, vha, 0xd013,
+			       "-> fwdt0 fwdump residual=%+ld\n",
+				fwdt->dump_size - len);
+		}
+
+		vha->hw->fw_dump_len = len;
 		vha->hw->fw_dumped = 1;
 
 		ql_log(ql_log_warn, vha, 0xd015,
@@ -1048,7 +1126,6 @@ qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
 	}
 
 bailout:
-	vha->hw->fw_dump_mpi = 0;
 #ifndef __CHECKER__
 	if (!hardware_locked)
 		spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 5504ab11decc..5dc697ce8b5d 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -966,7 +966,7 @@ static int qla4xxx_set_chap_entry(struct Scsi_Host *shost, void *data, int len)
 				   "%s: No such sysfs attribute\n", __func__);
 			rc = -ENOSYS;
 			goto exit_set_chap;
-		};
+		}
 	}
 
 	if (chap_rec.chap_type == CHAP_TYPE_IN)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 47835c4b4ee0..d5717914e1d5 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -202,24 +202,17 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)
 	blk_mq_requeue_request(cmd->request, true);
 }
 
-/*
- * Function:    scsi_queue_insert()
- *
- * Purpose:     Insert a command in the midlevel queue.
- *
- * Arguments:   cmd    - command that we are adding to queue.
- *              reason - why we are inserting command to queue.
- *
- * Lock status: Assumed that lock is not held upon entry.
+/**
+ * scsi_queue_insert - Reinsert a command in the queue.
+ * @cmd:    command that we are adding to queue.
+ * @reason: why we are inserting command to queue.
  *
- * Returns:     Nothing.
+ * We do this for one of two cases. Either the host is busy and it cannot accept
+ * any more commands for the time being, or the device returned QUEUE_FULL and
+ * can accept no more commands.
  *
- * Notes:       We do this for one of two cases.  Either the host is busy
- *              and it cannot accept any more commands for the time being,
- *              or the device returned QUEUE_FULL and can accept no more
- *              commands.
- * Notes:       This could be called either from an interrupt context or a
- *              normal process context.
+ * Context: This could be called either from an interrupt context or a normal
+ * process context.
  */
 void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
 {
@@ -301,16 +294,12 @@ int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 }
 EXPORT_SYMBOL(__scsi_execute);
 
-/*
- * Function:    scsi_init_cmd_errh()
- *
- * Purpose:     Initialize cmd fields related to error handling.
- *
- * Arguments:   cmd	- command that is ready to be queued.
+/**
+ * scsi_init_cmd_errh - Initialize cmd fields related to error handling.
+ * @cmd:  command that is ready to be queued.
  *
- * Notes:       This function has the job of initializing a number of
- *              fields related to error handling.   Typically this will
- *              be called once for each command, as required.
+ * This function has the job of initializing a number of fields related to error
+ * handling. Typically this will be called once for each command, as required.
  */
 static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
 {
@@ -496,17 +485,11 @@ static void scsi_starved_list_run(struct Scsi_Host *shost)
 	spin_unlock_irqrestore(shost->host_lock, flags);
 }
 
-/*
- * Function:   scsi_run_queue()
- *
- * Purpose:    Select a proper request queue to serve next
- *
- * Arguments:  q       - last request's queue
- *
- * Returns:     Nothing
+/**
+ * scsi_run_queue - Select a proper request queue to serve next.
+ * @q:  last request's queue
  *
- * Notes:      The previous command was completely finished, start
- *             a new one if possible.
+ * The previous command was completely finished, start a new one if possible.
  */
 static void scsi_run_queue(struct request_queue *q)
 {
@@ -548,7 +531,7 @@ static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
 	}
 }
 
-static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd)
+static void scsi_free_sgtables(struct scsi_cmnd *cmd)
 {
 	if (cmd->sdb.table.nents)
 		sg_free_table_chained(&cmd->sdb.table,
@@ -560,7 +543,7 @@ static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd)
 
 static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
 {
-	scsi_mq_free_sgtables(cmd);
+	scsi_free_sgtables(cmd);
 	scsi_uninit_cmd(cmd);
 }
 
@@ -896,34 +879,27 @@ static int scsi_io_completion_nz_result(struct scsi_cmnd *cmd, int result,
 	return result;
 }
 
-/*
- * Function:    scsi_io_completion()
- *
- * Purpose:     Completion processing for block device I/O requests.
- *
- * Arguments:   cmd   - command that is finished.
- *
- * Lock status: Assumed that no lock is held upon entry.
- *
- * Returns:     Nothing
- *
- * Notes:       We will finish off the specified number of sectors.  If we
- *		are done, the command block will be released and the queue
- *		function will be goosed.  If we are not done then we have to
- *		figure out what to do next:
- *
- *		a) We can call scsi_requeue_command().  The request
- *		   will be unprepared and put back on the queue.  Then
- *		   a new command will be created for it.  This should
- *		   be used if we made forward progress, or if we want
- *		   to switch from READ(10) to READ(6) for example.
- *
- *		b) We can call __scsi_queue_insert().  The request will
- *		   be put back on the queue and retried using the same
- *		   command as before, possibly after a delay.
- *
- *		c) We can call scsi_end_request() with blk_stat other than
- *		   BLK_STS_OK, to fail the remainder of the request.
+/**
+ * scsi_io_completion - Completion processing for SCSI commands.
+ * @cmd:	command that is finished.
+ * @good_bytes:	number of processed bytes.
+ *
+ * We will finish off the specified number of sectors. If we are done, the
+ * command block will be released and the queue function will be goosed. If we
+ * are not done then we have to figure out what to do next:
+ *
+ *   a) We can call scsi_io_completion_reprep().  The request will be
+ *	unprepared and put back on the queue.  Then a new command will
+ *	be created for it.  This should be used if we made forward
+ *	progress, or if we want to switch from READ(10) to READ(6) for
+ *	example.
+ *
+ *   b) We can call scsi_io_completion_action().  The request will be
+ *	put back on the queue and retried using the same command as
+ *	before, possibly after a delay.
+ *
+ *   c) We can call scsi_end_request() with blk_stat other than
+ *	BLK_STS_OK, to fail the remainder of the request.
  */
 void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 {
@@ -951,8 +927,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 		blk_rq_sectors(req), good_bytes));
 
 	/*
-	 * Next deal with any sectors which we were able to correctly
-	 * handle. Failed, zero length commands always need to drop down
+	 * Failed, zero length commands always need to drop down
 	 * to retry code. Fast path should return in this block.
 	 */
 	if (likely(blk_rq_bytes(req) > 0 || blk_stat == BLK_STS_OK)) {
@@ -978,56 +953,81 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 		scsi_io_completion_action(cmd, result);
 }
 
-static blk_status_t scsi_init_sgtable(struct request *req,
-		struct scsi_data_buffer *sdb)
+static inline bool scsi_cmd_needs_dma_drain(struct scsi_device *sdev,
+		struct request *rq)
 {
+	return sdev->dma_drain_len && blk_rq_is_passthrough(rq) &&
+	       !op_is_write(req_op(rq)) &&
+	       sdev->host->hostt->dma_need_drain(rq);
+}
+
+/**
+ * scsi_init_io - SCSI I/O initialization function.
+ * @cmd:  command descriptor we wish to initialize
+ *
+ * Returns:
+ * * BLK_STS_OK       - on success
+ * * BLK_STS_RESOURCE - if the failure is retryable
+ * * BLK_STS_IOERR    - if the failure is fatal
+ */
+blk_status_t scsi_init_io(struct scsi_cmnd *cmd)
+{
+	struct scsi_device *sdev = cmd->device;
+	struct request *rq = cmd->request;
+	unsigned short nr_segs = blk_rq_nr_phys_segments(rq);
+	struct scatterlist *last_sg = NULL;
+	blk_status_t ret;
+	bool need_drain = scsi_cmd_needs_dma_drain(sdev, rq);
 	int count;
 
+	if (WARN_ON_ONCE(!nr_segs))
+		return BLK_STS_IOERR;
+
+	/*
+	 * Make sure there is space for the drain.  The driver must adjust
+	 * max_hw_segments to be prepared for this.
+	 */
+	if (need_drain)
+		nr_segs++;
+
 	/*
 	 * If sg table allocation fails, requeue request later.
 	 */
-	if (unlikely(sg_alloc_table_chained(&sdb->table,
-			blk_rq_nr_phys_segments(req), sdb->table.sgl,
-			SCSI_INLINE_SG_CNT)))
+	if (unlikely(sg_alloc_table_chained(&cmd->sdb.table, nr_segs,
+			cmd->sdb.table.sgl, SCSI_INLINE_SG_CNT)))
 		return BLK_STS_RESOURCE;
 
-	/* 
+	/*
 	 * Next, walk the list, and fill in the addresses and sizes of
 	 * each segment.
 	 */
-	count = blk_rq_map_sg(req->q, req, sdb->table.sgl);
-	BUG_ON(count > sdb->table.nents);
-	sdb->table.nents = count;
-	sdb->length = blk_rq_payload_bytes(req);
-	return BLK_STS_OK;
-}
+	count = __blk_rq_map_sg(rq->q, rq, cmd->sdb.table.sgl, &last_sg);
 
-/*
- * Function:    scsi_init_io()
- *
- * Purpose:     SCSI I/O initialize function.
- *
- * Arguments:   cmd   - Command descriptor we wish to initialize
- *
- * Returns:     BLK_STS_OK on success
- *		BLK_STS_RESOURCE if the failure is retryable
- *		BLK_STS_IOERR if the failure is fatal
- */
-blk_status_t scsi_init_io(struct scsi_cmnd *cmd)
-{
-	struct request *rq = cmd->request;
-	blk_status_t ret;
+	if (blk_rq_bytes(rq) & rq->q->dma_pad_mask) {
+		unsigned int pad_len =
+			(rq->q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1;
 
-	if (WARN_ON_ONCE(!blk_rq_nr_phys_segments(rq)))
-		return BLK_STS_IOERR;
+		last_sg->length += pad_len;
+		cmd->extra_len += pad_len;
+	}
 
-	ret = scsi_init_sgtable(rq, &cmd->sdb);
-	if (ret)
-		return ret;
+	if (need_drain) {
+		sg_unmark_end(last_sg);
+		last_sg = sg_next(last_sg);
+		sg_set_buf(last_sg, sdev->dma_drain_buf, sdev->dma_drain_len);
+		sg_mark_end(last_sg);
+
+		cmd->extra_len += sdev->dma_drain_len;
+		count++;
+	}
+
+	BUG_ON(count > cmd->sdb.table.nents);
+	cmd->sdb.table.nents = count;
+	cmd->sdb.length = blk_rq_payload_bytes(rq);
 
 	if (blk_integrity_rq(rq)) {
 		struct scsi_data_buffer *prot_sdb = cmd->prot_sdb;
-		int ivecs, count;
+		int ivecs;
 
 		if (WARN_ON_ONCE(!prot_sdb)) {
 			/*
@@ -1059,7 +1059,7 @@ blk_status_t scsi_init_io(struct scsi_cmnd *cmd)
 
 	return BLK_STS_OK;
 out_free_sgtables:
-	scsi_mq_free_sgtables(cmd);
+	scsi_free_sgtables(cmd);
 	return ret;
 }
 EXPORT_SYMBOL(scsi_init_io);
@@ -1190,6 +1190,7 @@ static blk_status_t scsi_setup_cmnd(struct scsi_device *sdev,
 		struct request *req)
 {
 	struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
+	blk_status_t ret;
 
 	if (!blk_rq_bytes(req))
 		cmd->sc_data_direction = DMA_NONE;
@@ -1199,9 +1200,14 @@ static blk_status_t scsi_setup_cmnd(struct scsi_device *sdev,
 		cmd->sc_data_direction = DMA_FROM_DEVICE;
 
 	if (blk_rq_is_scsi(req))
-		return scsi_setup_scsi_cmnd(sdev, req);
+		ret = scsi_setup_scsi_cmnd(sdev, req);
 	else
-		return scsi_setup_fs_cmnd(sdev, req);
+		ret = scsi_setup_fs_cmnd(sdev, req);
+
+	if (ret != BLK_STS_OK)
+		scsi_free_sgtables(cmd);
+
+	return ret;
 }
 
 static blk_status_t
@@ -1610,12 +1616,7 @@ static bool scsi_mq_get_budget(struct blk_mq_hw_ctx *hctx)
 	struct request_queue *q = hctx->queue;
 	struct scsi_device *sdev = q->queuedata;
 
-	if (scsi_dev_queue_ready(q, sdev))
-		return true;
-
-	if (atomic_read(&sdev->device_busy) == 0 && !scsi_device_blocked(sdev))
-		blk_mq_delay_run_hw_queue(hctx, SCSI_QUEUE_DELAY);
-	return false;
+	return scsi_dev_queue_ready(q, sdev);
 }
 
 static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx,
@@ -1921,21 +1922,13 @@ struct scsi_device *scsi_device_from_queue(struct request_queue *q)
 }
 EXPORT_SYMBOL_GPL(scsi_device_from_queue);
 
-/*
- * Function:    scsi_block_requests()
- *
- * Purpose:     Utility function used by low-level drivers to prevent further
- *		commands from being queued to the device.
- *
- * Arguments:   shost       - Host in question
- *
- * Returns:     Nothing
- *
- * Lock status: No locks are assumed held.
+/**
+ * scsi_block_requests - Utility function used by low-level drivers to prevent
+ * further commands from being queued to the device.
+ * @shost:  host in question
  *
- * Notes:       There is no timer nor any other means by which the requests
- *		get unblocked other than the low-level driver calling
- *		scsi_unblock_requests().
+ * There is no timer nor any other means by which the requests get unblocked
+ * other than the low-level driver calling scsi_unblock_requests().
  */
 void scsi_block_requests(struct Scsi_Host *shost)
 {
@@ -1943,25 +1936,15 @@ void scsi_block_requests(struct Scsi_Host *shost)
 }
 EXPORT_SYMBOL(scsi_block_requests);
 
-/*
- * Function:    scsi_unblock_requests()
- *
- * Purpose:     Utility function used by low-level drivers to allow further
- *		commands from being queued to the device.
- *
- * Arguments:   shost       - Host in question
- *
- * Returns:     Nothing
- *
- * Lock status: No locks are assumed held.
- *
- * Notes:       There is no timer nor any other means by which the requests
- *		get unblocked other than the low-level driver calling
- *		scsi_unblock_requests().
- *
- *		This is done as an API function so that changes to the
- *		internals of the scsi mid-layer won't require wholesale
- *		changes to drivers that use this feature.
+/**
+ * scsi_unblock_requests - Utility function used by low-level drivers to allow
+ * further commands to be queued to the device.
+ * @shost:  host in question
+ *
+ * There is no timer nor any other means by which the requests get unblocked
+ * other than the low-level driver calling scsi_unblock_requests(). This is done
+ * as an API function so that changes to the internals of the scsi mid-layer
+ * won't require wholesale changes to drivers that use this feature.
  */
 void scsi_unblock_requests(struct Scsi_Host *shost)
 {
@@ -2284,6 +2267,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		switch (oldstate) {
 		case SDEV_RUNNING:
 		case SDEV_CREATED_BLOCK:
+		case SDEV_QUIESCE:
 		case SDEV_OFFLINE:
 			break;
 		default:
@@ -2841,11 +2825,27 @@ scsi_host_block(struct Scsi_Host *shost)
 	struct scsi_device *sdev;
 	int ret = 0;
 
+	/*
+	 * Call scsi_internal_device_block_nowait so we can avoid
+	 * calling synchronize_rcu() for each LUN.
+	 */
 	shost_for_each_device(sdev, shost) {
-		ret = scsi_internal_device_block(sdev);
+		mutex_lock(&sdev->state_mutex);
+		ret = scsi_internal_device_block_nowait(sdev);
+		mutex_unlock(&sdev->state_mutex);
 		if (ret)
 			break;
 	}
+
+	/*
+	 * SCSI never enables blk-mq's BLK_MQ_F_BLOCKING flag so
+	 * calling synchronize_rcu() once is enough.
+	 */
+	WARN_ON_ONCE(shost->tag_set.flags & BLK_MQ_F_BLOCKING);
+
+	if (!ret)
+		synchronize_rcu();
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(scsi_host_block);
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index f45c22b09726..8be27426aa66 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -136,8 +136,7 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp,
 
 	while (bufsize >= SECTOR_SIZE) {
 		buf = __vmalloc(bufsize,
-				GFP_KERNEL | __GFP_ZERO | __GFP_NORETRY,
-				PAGE_KERNEL);
+				GFP_KERNEL | __GFP_ZERO | __GFP_NORETRY);
 		if (buf) {
 			*buflen = bufsize;
 			return buf;
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index 713bce998b0e..3bdf0deb8f15 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -187,7 +187,7 @@ static inline void init_hpc_chain(struct ip22_hostdata *hdata)
 		hcp++;
 		dma += sizeof(struct hpc_chunk);
 		start += sizeof(struct hpc_chunk);
-	};
+	}
 	hcp--;
 	hcp->desc.pnext = hdata->dma;
 }
diff --git a/drivers/scsi/snic/snic.h b/drivers/scsi/snic/snic.h
index de0ab5fc8474..f4c666285bba 100644
--- a/drivers/scsi/snic/snic.h
+++ b/drivers/scsi/snic/snic.h
@@ -399,7 +399,7 @@ void snic_handle_link_event(struct snic *);
 void snic_handle_link(struct work_struct *);
 
 int snic_queue_exch_ver_req(struct snic *);
-int snic_io_exch_ver_cmpl_handler(struct snic *, struct snic_fw_req *);
+void snic_io_exch_ver_cmpl_handler(struct snic *, struct snic_fw_req *);
 
 int snic_queue_wq_desc(struct snic *, void *os_buf, u16 len);
 
diff --git a/drivers/scsi/snic/snic_ctl.c b/drivers/scsi/snic/snic_ctl.c
index 449b03f3bbd3..4cd86115cfb2 100644
--- a/drivers/scsi/snic/snic_ctl.c
+++ b/drivers/scsi/snic/snic_ctl.c
@@ -151,7 +151,7 @@ snic_queue_exch_ver_req(struct snic *snic)
 /*
  * snic_io_exch_ver_cmpl_handler
  */
-int
+void
 snic_io_exch_ver_cmpl_handler(struct snic *snic, struct snic_fw_req *fwreq)
 {
 	struct snic_req_info *rqi = NULL;
@@ -160,7 +160,6 @@ snic_io_exch_ver_cmpl_handler(struct snic *snic, struct snic_fw_req *fwreq)
 	u32 cmnd_id, hid, max_sgs;
 	ulong ctx = 0;
 	unsigned long flags;
-	int ret = 0;
 
 	SNIC_HOST_INFO(snic->shost, "Exch Ver Compl Received.\n");
 	snic_io_hdr_dec(&fwreq->hdr, &typ, &hdr_stat, &cmnd_id, &hid, &ctx);
@@ -224,8 +223,6 @@ snic_io_exch_ver_cmpl_handler(struct snic *snic, struct snic_fw_req *fwreq)
 	snic_release_untagged_req(snic, rqi);
 
 	SNIC_HOST_INFO(snic->shost, "Exch_cmpl Done, hdr_stat %d.\n", hdr_stat);
-
-	return ret;
 } /* end of snic_io_exch_ver_cmpl_handler */
 
 /*
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index d2fe3fa470f9..7727893238c7 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -51,6 +51,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/uaccess.h>
 
+#include <asm/unaligned.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_device.h>
@@ -344,10 +346,8 @@ static int sr_done(struct scsi_cmnd *SCpnt)
 		case ILLEGAL_REQUEST:
 			if (!(SCpnt->sense_buffer[0] & 0x90))
 				break;
-			error_sector = (SCpnt->sense_buffer[3] << 24) |
-				(SCpnt->sense_buffer[4] << 16) |
-				(SCpnt->sense_buffer[5] << 8) |
-				SCpnt->sense_buffer[6];
+			error_sector =
+				get_unaligned_be32(&SCpnt->sense_buffer[3]);
 			if (SCpnt->request->bio != NULL)
 				block_sectors =
 					bio_sectors(SCpnt->request->bio);
@@ -495,13 +495,9 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)
 		SCpnt->sdb.length = this_count * s_size;
 	}
 
-	SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
-	SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
-	SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
-	SCpnt->cmnd[5] = (unsigned char) block & 0xff;
+	put_unaligned_be32(block, &SCpnt->cmnd[2]);
 	SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
-	SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
-	SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
+	put_unaligned_be16(this_count, &SCpnt->cmnd[7]);
 
 	/*
 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
@@ -854,8 +850,7 @@ static void get_sectorsize(struct scsi_cd *cd)
 	} else {
 		long last_written;
 
-		cd->capacity = 1 + ((buffer[0] << 24) | (buffer[1] << 16) |
-				    (buffer[2] << 8) | buffer[3]);
+		cd->capacity = 1 + get_unaligned_be32(&buffer[0]);
 		/*
 		 * READ_CAPACITY doesn't return the correct size on
 		 * certain UDF media.  If last_written is larger, use
@@ -866,8 +861,7 @@ static void get_sectorsize(struct scsi_cd *cd)
 		if (!cdrom_get_last_written(&cd->cdi, &last_written))
 			cd->capacity = max_t(long, cd->capacity, last_written);
 
-		sector_size = (buffer[4] << 24) |
-		    (buffer[5] << 16) | (buffer[6] << 8) | buffer[7];
+		sector_size = get_unaligned_be32(&buffer[4]);
 		switch (sector_size) {
 			/*
 			 * HP 4020i CD-Recorder reports 2340 byte sectors
@@ -955,13 +949,13 @@ static void get_capabilities(struct scsi_cd *cd)
 	}
 
 	n = data.header_length + data.block_descriptor_length;
-	cd->cdi.speed = ((buffer[n + 8] << 8) + buffer[n + 9]) / 176;
+	cd->cdi.speed = get_unaligned_be16(&buffer[n + 8]) / 176;
 	cd->readcd_known = 1;
 	cd->readcd_cdda = buffer[n + 5] & 0x01;
 	/* print some capability bits */
 	sr_printk(KERN_INFO, cd,
 		  "scsi3-mmc drive: %dx/%dx %s%s%s%s%s%s\n",
-		  ((buffer[n + 14] << 8) + buffer[n + 15]) / 176,
+		  get_unaligned_be16(&buffer[n + 14]) / 176,
 		  cd->cdi.speed,
 		  buffer[n + 3] & 0x01 ? "writer " : "", /* CD Writer */
 		  buffer[n + 3] & 0x20 ? "dvd-ram " : "",
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index c5f9b348b438..4bf4ab3b70f4 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -1457,7 +1457,6 @@ static int st_flush(struct file *filp, fl_owner_t id)
    accessing this tape. */
 static int st_release(struct inode *inode, struct file *filp)
 {
-	int result = 0;
 	struct scsi_tape *STp = filp->private_data;
 
 	if (STp->door_locked == ST_LOCKED_AUTO)
@@ -1470,9 +1469,9 @@ static int st_release(struct inode *inode, struct file *filp)
 	scsi_autopm_put_device(STp->device);
 	scsi_tape_put(STp);
 
-	return result;
+	return 0;
 }
-
+
 /* The checks common to both reading and writing */
 static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count)
 {
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index fb41636519ee..a680592b9d32 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -621,6 +621,63 @@ static inline struct storvsc_device *get_in_stor_device(
 
 }
 
+void storvsc_change_target_cpu(struct vmbus_channel *channel, u32 old, u32 new)
+{
+	struct storvsc_device *stor_device;
+	struct vmbus_channel *cur_chn;
+	bool old_is_alloced = false;
+	struct hv_device *device;
+	unsigned long flags;
+	int cpu;
+
+	device = channel->primary_channel ?
+			channel->primary_channel->device_obj
+				: channel->device_obj;
+	stor_device = get_out_stor_device(device);
+	if (!stor_device)
+		return;
+
+	/* See storvsc_do_io() -> get_og_chn(). */
+	spin_lock_irqsave(&device->channel->lock, flags);
+
+	/*
+	 * Determines if the storvsc device has other channels assigned to
+	 * the "old" CPU to update the alloced_cpus mask and the stor_chns
+	 * array.
+	 */
+	if (device->channel != channel && device->channel->target_cpu == old) {
+		cur_chn = device->channel;
+		old_is_alloced = true;
+		goto old_is_alloced;
+	}
+	list_for_each_entry(cur_chn, &device->channel->sc_list, sc_list) {
+		if (cur_chn == channel)
+			continue;
+		if (cur_chn->target_cpu == old) {
+			old_is_alloced = true;
+			goto old_is_alloced;
+		}
+	}
+
+old_is_alloced:
+	if (old_is_alloced)
+		WRITE_ONCE(stor_device->stor_chns[old], cur_chn);
+	else
+		cpumask_clear_cpu(old, &stor_device->alloced_cpus);
+
+	/* "Flush" the stor_chns array. */
+	for_each_possible_cpu(cpu) {
+		if (stor_device->stor_chns[cpu] && !cpumask_test_cpu(
+					cpu, &stor_device->alloced_cpus))
+			WRITE_ONCE(stor_device->stor_chns[cpu], NULL);
+	}
+
+	WRITE_ONCE(stor_device->stor_chns[new], channel);
+	cpumask_set_cpu(new, &stor_device->alloced_cpus);
+
+	spin_unlock_irqrestore(&device->channel->lock, flags);
+}
+
 static void handle_sc_creation(struct vmbus_channel *new_sc)
 {
 	struct hv_device *device = new_sc->primary_channel->device_obj;
@@ -648,6 +705,8 @@ static void handle_sc_creation(struct vmbus_channel *new_sc)
 		return;
 	}
 
+	new_sc->change_target_cpu_callback = storvsc_change_target_cpu;
+
 	/* Add the sub-channel to the array of available channels. */
 	stor_device->stor_chns[new_sc->target_cpu] = new_sc;
 	cpumask_set_cpu(new_sc->target_cpu, &stor_device->alloced_cpus);
@@ -876,6 +935,8 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 	if (stor_device->stor_chns == NULL)
 		return -ENOMEM;
 
+	device->channel->change_target_cpu_callback = storvsc_change_target_cpu;
+
 	stor_device->stor_chns[device->channel->target_cpu] = device->channel;
 	cpumask_set_cpu(device->channel->target_cpu,
 			&stor_device->alloced_cpus);
@@ -1248,8 +1309,10 @@ static struct vmbus_channel *get_og_chn(struct storvsc_device *stor_device,
 	const struct cpumask *node_mask;
 	int num_channels, tgt_cpu;
 
-	if (stor_device->num_sc == 0)
+	if (stor_device->num_sc == 0) {
+		stor_device->stor_chns[q_num] = stor_device->device->channel;
 		return stor_device->device->channel;
+	}
 
 	/*
 	 * Our channel array is sparsley populated and we
@@ -1258,7 +1321,6 @@ static struct vmbus_channel *get_og_chn(struct storvsc_device *stor_device,
 	 * The strategy is simple:
 	 * I. Ensure NUMA locality
 	 * II. Distribute evenly (best effort)
-	 * III. Mapping is persistent.
 	 */
 
 	node_mask = cpumask_of_node(cpu_to_node(q_num));
@@ -1268,8 +1330,10 @@ static struct vmbus_channel *get_og_chn(struct storvsc_device *stor_device,
 		if (cpumask_test_cpu(tgt_cpu, node_mask))
 			num_channels++;
 	}
-	if (num_channels == 0)
+	if (num_channels == 0) {
+		stor_device->stor_chns[q_num] = stor_device->device->channel;
 		return stor_device->device->channel;
+	}
 
 	hash_qnum = q_num;
 	while (hash_qnum >= num_channels)
@@ -1295,6 +1359,7 @@ static int storvsc_do_io(struct hv_device *device,
 	struct storvsc_device *stor_device;
 	struct vstor_packet *vstor_packet;
 	struct vmbus_channel *outgoing_channel, *channel;
+	unsigned long flags;
 	int ret = 0;
 	const struct cpumask *node_mask;
 	int tgt_cpu;
@@ -1308,10 +1373,11 @@ static int storvsc_do_io(struct hv_device *device,
 
 	request->device  = device;
 	/*
-	 * Select an an appropriate channel to send the request out.
+	 * Select an appropriate channel to send the request out.
 	 */
-	if (stor_device->stor_chns[q_num] != NULL) {
-		outgoing_channel = stor_device->stor_chns[q_num];
+	/* See storvsc_change_target_cpu(). */
+	outgoing_channel = READ_ONCE(stor_device->stor_chns[q_num]);
+	if (outgoing_channel != NULL) {
 		if (outgoing_channel->target_cpu == q_num) {
 			/*
 			 * Ideally, we want to pick a different channel if
@@ -1324,7 +1390,10 @@ static int storvsc_do_io(struct hv_device *device,
 					continue;
 				if (tgt_cpu == q_num)
 					continue;
-				channel = stor_device->stor_chns[tgt_cpu];
+				channel = READ_ONCE(
+					stor_device->stor_chns[tgt_cpu]);
+				if (channel == NULL)
+					continue;
 				if (hv_get_avail_to_write_percent(
 							&channel->outbound)
 						> ring_avail_percent_lowater) {
@@ -1350,7 +1419,10 @@ static int storvsc_do_io(struct hv_device *device,
 			for_each_cpu(tgt_cpu, &stor_device->alloced_cpus) {
 				if (cpumask_test_cpu(tgt_cpu, node_mask))
 					continue;
-				channel = stor_device->stor_chns[tgt_cpu];
+				channel = READ_ONCE(
+					stor_device->stor_chns[tgt_cpu]);
+				if (channel == NULL)
+					continue;
 				if (hv_get_avail_to_write_percent(
 							&channel->outbound)
 						> ring_avail_percent_lowater) {
@@ -1360,7 +1432,14 @@ static int storvsc_do_io(struct hv_device *device,
 			}
 		}
 	} else {
+		spin_lock_irqsave(&device->channel->lock, flags);
+		outgoing_channel = stor_device->stor_chns[q_num];
+		if (outgoing_channel != NULL) {
+			spin_unlock_irqrestore(&device->channel->lock, flags);
+			goto found_channel;
+		}
 		outgoing_channel = get_og_chn(stor_device, q_num);
+		spin_unlock_irqrestore(&device->channel->lock, flags);
 	}
 
 found_channel:
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 19aa5c44e0da..00ce8d6cbb36 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -572,7 +572,6 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct phy *phy = host->generic_phy;
-	int ret = 0;
 
 	if (ufs_qcom_is_link_off(hba)) {
 		/*
@@ -587,7 +586,7 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		ufs_qcom_disable_lane_clks(host);
 	}
 
-	return ret;
+	return 0;
 }
 
 static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
@@ -1071,6 +1070,7 @@ static void ufs_qcom_set_caps(struct ufs_hba *hba)
 	hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
 	hba->caps |= UFSHCD_CAP_CLK_SCALING;
 	hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+	hba->caps |= UFSHCD_CAP_WB_EN;
 
 	if (host->hw_ver.major >= 0x2) {
 		host->caps = UFS_QCOM_CAP_QUNIPRO |
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index 92a63eebdca9..93484408bc40 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -276,6 +276,10 @@ UFS_DEVICE_DESC_PARAM(device_version, _DEV_VER, 2);
 UFS_DEVICE_DESC_PARAM(number_of_secure_wpa, _NUM_SEC_WPA, 1);
 UFS_DEVICE_DESC_PARAM(psa_max_data_size, _PSA_MAX_DATA, 4);
 UFS_DEVICE_DESC_PARAM(psa_state_timeout, _PSA_TMT, 1);
+UFS_DEVICE_DESC_PARAM(ext_feature_sup, _EXT_UFS_FEATURE_SUP, 4);
+UFS_DEVICE_DESC_PARAM(wb_presv_us_en, _WB_PRESRV_USRSPC_EN, 1);
+UFS_DEVICE_DESC_PARAM(wb_type, _WB_TYPE, 1);
+UFS_DEVICE_DESC_PARAM(wb_shared_alloc_units, _WB_SHARED_ALLOC_UNITS, 4);
 
 static struct attribute *ufs_sysfs_device_descriptor[] = {
 	&dev_attr_device_type.attr,
@@ -304,6 +308,10 @@ static struct attribute *ufs_sysfs_device_descriptor[] = {
 	&dev_attr_number_of_secure_wpa.attr,
 	&dev_attr_psa_max_data_size.attr,
 	&dev_attr_psa_state_timeout.attr,
+	&dev_attr_ext_feature_sup.attr,
+	&dev_attr_wb_presv_us_en.attr,
+	&dev_attr_wb_type.attr,
+	&dev_attr_wb_shared_alloc_units.attr,
 	NULL,
 };
 
@@ -373,6 +381,12 @@ UFS_GEOMETRY_DESC_PARAM(enh4_memory_max_alloc_units,
 	_ENM4_MAX_NUM_UNITS, 4);
 UFS_GEOMETRY_DESC_PARAM(enh4_memory_capacity_adjustment_factor,
 	_ENM4_CAP_ADJ_FCTR, 2);
+UFS_GEOMETRY_DESC_PARAM(wb_max_alloc_units, _WB_MAX_ALLOC_UNITS, 4);
+UFS_GEOMETRY_DESC_PARAM(wb_max_wb_luns, _WB_MAX_WB_LUNS, 1);
+UFS_GEOMETRY_DESC_PARAM(wb_buff_cap_adj, _WB_BUFF_CAP_ADJ, 1);
+UFS_GEOMETRY_DESC_PARAM(wb_sup_red_type, _WB_SUP_RED_TYPE, 1);
+UFS_GEOMETRY_DESC_PARAM(wb_sup_wb_type, _WB_SUP_WB_TYPE, 1);
+
 
 static struct attribute *ufs_sysfs_geometry_descriptor[] = {
 	&dev_attr_raw_device_capacity.attr,
@@ -404,6 +418,11 @@ static struct attribute *ufs_sysfs_geometry_descriptor[] = {
 	&dev_attr_enh3_memory_capacity_adjustment_factor.attr,
 	&dev_attr_enh4_memory_max_alloc_units.attr,
 	&dev_attr_enh4_memory_capacity_adjustment_factor.attr,
+	&dev_attr_wb_max_alloc_units.attr,
+	&dev_attr_wb_max_wb_luns.attr,
+	&dev_attr_wb_buff_cap_adj.attr,
+	&dev_attr_wb_sup_red_type.attr,
+	&dev_attr_wb_sup_wb_type.attr,
 	NULL,
 };
 
@@ -616,7 +635,7 @@ static ssize_t _name##_show(struct device *dev,				\
 	pm_runtime_put_sync(hba->dev);					\
 	if (ret)							\
 		return -EINVAL;						\
-	return sprintf(buf, "%s\n", flag ? "true" : "false");		\
+	return sprintf(buf, "%s\n", flag ? "true" : "false"); \
 }									\
 static DEVICE_ATTR_RO(_name)
 
@@ -628,6 +647,9 @@ UFS_FLAG(life_span_mode_enable, _LIFE_SPAN_MODE_ENABLE);
 UFS_FLAG(phy_resource_removal, _FPHYRESOURCEREMOVAL);
 UFS_FLAG(busy_rtc, _BUSY_RTC);
 UFS_FLAG(disable_fw_update, _PERMANENTLY_DISABLE_FW_UPDATE);
+UFS_FLAG(wb_enable, _WB_EN);
+UFS_FLAG(wb_flush_en, _WB_BUFF_FLUSH_EN);
+UFS_FLAG(wb_flush_during_h8, _WB_BUFF_FLUSH_DURING_HIBERN8);
 
 static struct attribute *ufs_sysfs_device_flags[] = {
 	&dev_attr_device_init.attr,
@@ -638,6 +660,9 @@ static struct attribute *ufs_sysfs_device_flags[] = {
 	&dev_attr_phy_resource_removal.attr,
 	&dev_attr_busy_rtc.attr,
 	&dev_attr_disable_fw_update.attr,
+	&dev_attr_wb_enable.attr,
+	&dev_attr_wb_flush_en.attr,
+	&dev_attr_wb_flush_during_h8.attr,
 	NULL,
 };
 
@@ -679,6 +704,11 @@ UFS_ATTRIBUTE(exception_event_status, _EE_STATUS);
 UFS_ATTRIBUTE(ffu_status, _FFU_STATUS);
 UFS_ATTRIBUTE(psa_state, _PSA_STATE);
 UFS_ATTRIBUTE(psa_data_size, _PSA_DATA_SIZE);
+UFS_ATTRIBUTE(wb_flush_status, _WB_FLUSH_STATUS);
+UFS_ATTRIBUTE(wb_avail_buf, _AVAIL_WB_BUFF_SIZE);
+UFS_ATTRIBUTE(wb_life_time_est, _WB_BUFF_LIFE_TIME_EST);
+UFS_ATTRIBUTE(wb_cur_buf, _CURR_WB_BUFF_SIZE);
+
 
 static struct attribute *ufs_sysfs_attributes[] = {
 	&dev_attr_boot_lun_enabled.attr,
@@ -697,6 +727,10 @@ static struct attribute *ufs_sysfs_attributes[] = {
 	&dev_attr_ffu_status.attr,
 	&dev_attr_psa_state.attr,
 	&dev_attr_psa_data_size.attr,
+	&dev_attr_wb_flush_status.attr,
+	&dev_attr_wb_avail_buf.attr,
+	&dev_attr_wb_life_time_est.attr,
+	&dev_attr_wb_cur_buf.attr,
 	NULL,
 };
 
@@ -748,6 +782,8 @@ UFS_UNIT_DESC_PARAM(provisioning_type, _PROVISIONING_TYPE, 1);
 UFS_UNIT_DESC_PARAM(physical_memory_resourse_count, _PHY_MEM_RSRC_CNT, 8);
 UFS_UNIT_DESC_PARAM(context_capabilities, _CTX_CAPABILITIES, 2);
 UFS_UNIT_DESC_PARAM(large_unit_granularity, _LARGE_UNIT_SIZE_M1, 1);
+UFS_UNIT_DESC_PARAM(wb_buf_alloc_units, _WB_BUF_ALLOC_UNITS, 4);
+
 
 static struct attribute *ufs_sysfs_unit_descriptor[] = {
 	&dev_attr_boot_lun_id.attr,
@@ -763,6 +799,7 @@ static struct attribute *ufs_sysfs_unit_descriptor[] = {
 	&dev_attr_physical_memory_resourse_count.attr,
 	&dev_attr_context_capabilities.attr,
 	&dev_attr_large_unit_granularity.attr,
+	&dev_attr_wb_buf_alloc_units.attr,
 	NULL,
 };
 
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 990cb48e2403..daac5053b850 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -140,6 +140,9 @@ enum flag_idn {
 	QUERY_FLAG_IDN_BUSY_RTC				= 0x09,
 	QUERY_FLAG_IDN_RESERVED3			= 0x0A,
 	QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE	= 0x0B,
+	QUERY_FLAG_IDN_WB_EN                            = 0x0E,
+	QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN                 = 0x0F,
+	QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8     = 0x10,
 };
 
 /* Attribute idn for Query requests */
@@ -168,6 +171,10 @@ enum attr_idn {
 	QUERY_ATTR_IDN_PSA_STATE		= 0x15,
 	QUERY_ATTR_IDN_PSA_DATA_SIZE		= 0x16,
 	QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME	= 0x17,
+	QUERY_ATTR_IDN_WB_FLUSH_STATUS	        = 0x1C,
+	QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE       = 0x1D,
+	QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST    = 0x1E,
+	QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE        = 0x1F,
 };
 
 /* Descriptor idn for Query requests */
@@ -191,9 +198,9 @@ enum desc_header_offset {
 };
 
 enum ufs_desc_def_size {
-	QUERY_DESC_DEVICE_DEF_SIZE		= 0x40,
+	QUERY_DESC_DEVICE_DEF_SIZE		= 0x59,
 	QUERY_DESC_CONFIGURATION_DEF_SIZE	= 0x90,
-	QUERY_DESC_UNIT_DEF_SIZE		= 0x23,
+	QUERY_DESC_UNIT_DEF_SIZE		= 0x2D,
 	QUERY_DESC_INTERCONNECT_DEF_SIZE	= 0x06,
 	QUERY_DESC_GEOMETRY_DEF_SIZE		= 0x48,
 	QUERY_DESC_POWER_DEF_SIZE		= 0x62,
@@ -219,6 +226,7 @@ enum unit_desc_param {
 	UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT	= 0x18,
 	UNIT_DESC_PARAM_CTX_CAPABILITIES	= 0x20,
 	UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1	= 0x22,
+	UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS	= 0x29,
 };
 
 /* Device descriptor parameters offsets in bytes*/
@@ -258,6 +266,10 @@ enum device_desc_param {
 	DEVICE_DESC_PARAM_PSA_MAX_DATA		= 0x25,
 	DEVICE_DESC_PARAM_PSA_TMT		= 0x29,
 	DEVICE_DESC_PARAM_PRDCT_REV		= 0x2A,
+	DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP	= 0x4F,
+	DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN	= 0x53,
+	DEVICE_DESC_PARAM_WB_TYPE		= 0x54,
+	DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS = 0x55,
 };
 
 /* Interconnect descriptor parameters offsets in bytes*/
@@ -302,6 +314,11 @@ enum geometry_desc_param {
 	GEOMETRY_DESC_PARAM_ENM4_MAX_NUM_UNITS	= 0x3E,
 	GEOMETRY_DESC_PARAM_ENM4_CAP_ADJ_FCTR	= 0x42,
 	GEOMETRY_DESC_PARAM_OPT_LOG_BLK_SIZE	= 0x44,
+	GEOMETRY_DESC_PARAM_WB_MAX_ALLOC_UNITS	= 0x4F,
+	GEOMETRY_DESC_PARAM_WB_MAX_WB_LUNS	= 0x53,
+	GEOMETRY_DESC_PARAM_WB_BUFF_CAP_ADJ	= 0x54,
+	GEOMETRY_DESC_PARAM_WB_SUP_RED_TYPE	= 0x55,
+	GEOMETRY_DESC_PARAM_WB_SUP_WB_TYPE	= 0x56,
 };
 
 /* Health descriptor parameters offsets in bytes*/
@@ -333,6 +350,11 @@ enum {
 	UFSHCD_AMP		= 3,
 };
 
+/* Possible values for dExtendedUFSFeaturesSupport */
+enum {
+	UFS_DEV_WRITE_BOOSTER_SUP	= BIT(8),
+};
+
 #define POWER_DESC_MAX_SIZE			0x62
 #define POWER_DESC_MAX_ACTV_ICC_LVLS		16
 
@@ -447,6 +469,11 @@ enum ufs_dev_pwr_mode {
 	UFS_POWERDOWN_PWR_MODE	= 3,
 };
 
+enum ufs_dev_wb_buf_avail_size {
+	UFS_WB_10_PERCENT_BUF_REMAIN = 0x1,
+	UFS_WB_40_PERCENT_BUF_REMAIN = 0x4,
+};
+
 /**
  * struct utp_cmd_rsp - Response UPIU structure
  * @residual_transfer_count: Residual transfer count DW-3
@@ -537,6 +564,11 @@ struct ufs_dev_info {
 	u8 *model;
 	u16 wspecversion;
 	u32 clk_gating_wait_us;
+	u32 d_ext_ufs_feature_sup;
+	u8 b_wb_buffer_type;
+	u32 d_wb_alloc_units;
+	bool keep_vcc_on;
+	u8 b_presrv_uspc_en;
 };
 
 /**
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 698e8d20b4ba..915e963398c4 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -48,6 +48,8 @@
 #include "unipro.h"
 #include "ufs-sysfs.h"
 #include "ufs_bsg.h"
+#include <asm/unaligned.h>
+#include <linux/blkdev.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/ufs.h>
@@ -251,6 +253,13 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up);
 static irqreturn_t ufshcd_intr(int irq, void *__hba);
 static int ufshcd_change_power_mode(struct ufs_hba *hba,
 			     struct ufs_pa_layer_attr *pwr_mode);
+static bool ufshcd_wb_sup(struct ufs_hba *hba);
+static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba);
+static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba);
+static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
+static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set);
+static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable);
+
 static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag)
 {
 	return tag >= 0 && tag < hba->nutrs;
@@ -272,6 +281,25 @@ static inline void ufshcd_disable_irq(struct ufs_hba *hba)
 	}
 }
 
+static inline void ufshcd_wb_config(struct ufs_hba *hba)
+{
+	int ret;
+
+	if (!ufshcd_wb_sup(hba))
+		return;
+
+	ret = ufshcd_wb_ctrl(hba, true);
+	if (ret)
+		dev_err(hba->dev, "%s: Enable WB failed: %d\n", __func__, ret);
+	else
+		dev_info(hba->dev, "%s: Write Booster Configured\n", __func__);
+	ret = ufshcd_wb_toggle_flush_during_h8(hba, true);
+	if (ret)
+		dev_err(hba->dev, "%s: En WB flush during H8: failed: %d\n",
+			__func__, ret);
+	ufshcd_wb_toggle_flush(hba, true);
+}
+
 static void ufshcd_scsi_unblock_requests(struct ufs_hba *hba)
 {
 	if (atomic_dec_and_test(&hba->scsi_block_reqs_cnt))
@@ -1150,10 +1178,17 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
 	/* scale up the gear after scaling up clocks */
 	if (scale_up) {
 		ret = ufshcd_scale_gear(hba, true);
-		if (ret)
+		if (ret) {
 			ufshcd_scale_clks(hba, false);
+			goto out_unprepare;
+		}
 	}
 
+	/* Enable Write Booster if we have scaled up else disable it */
+	up_write(&hba->clk_scaling_lock);
+	ufshcd_wb_ctrl(hba, scale_up);
+	down_write(&hba->clk_scaling_lock);
+
 out_unprepare:
 	ufshcd_clock_scaling_unprepare(hba);
 out:
@@ -3223,7 +3258,7 @@ static inline int ufshcd_read_desc(struct ufs_hba *hba,
 struct uc_string_id {
 	u8 len;
 	u8 type;
-	wchar_t uc[0];
+	wchar_t uc[];
 } __packed;
 
 /* replace non-printable or non-ASCII characters with spaces */
@@ -4137,7 +4172,7 @@ static int ufshcd_complete_dev_init(struct ufs_hba *hba)
 {
 	int i;
 	int err;
-	bool flag_res = 1;
+	bool flag_res = true;
 
 	err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG,
 		QUERY_FLAG_IDN_FDEVICEINIT, NULL);
@@ -5161,6 +5196,166 @@ static void ufshcd_bkops_exception_event_handler(struct ufs_hba *hba)
 				__func__, err);
 }
 
+static bool ufshcd_wb_sup(struct ufs_hba *hba)
+{
+	return ufshcd_is_wb_allowed(hba);
+}
+
+static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
+{
+	int ret;
+	enum query_opcode opcode;
+
+	if (!ufshcd_wb_sup(hba))
+		return 0;
+
+	if (!(enable ^ hba->wb_enabled))
+		return 0;
+	if (enable)
+		opcode = UPIU_QUERY_OPCODE_SET_FLAG;
+	else
+		opcode = UPIU_QUERY_OPCODE_CLEAR_FLAG;
+
+	ret = ufshcd_query_flag_retry(hba, opcode,
+				      QUERY_FLAG_IDN_WB_EN, NULL);
+	if (ret) {
+		dev_err(hba->dev, "%s write booster %s failed %d\n",
+			__func__, enable ? "enable" : "disable", ret);
+		return ret;
+	}
+
+	hba->wb_enabled = enable;
+	dev_dbg(hba->dev, "%s write booster %s %d\n",
+			__func__, enable ? "enable" : "disable", ret);
+
+	return ret;
+}
+
+static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set)
+{
+	int val;
+
+	if (set)
+		val =  UPIU_QUERY_OPCODE_SET_FLAG;
+	else
+		val = UPIU_QUERY_OPCODE_CLEAR_FLAG;
+
+	return ufshcd_query_flag_retry(hba, val,
+			       QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8,
+				       NULL);
+}
+
+static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable)
+{
+	if (enable)
+		ufshcd_wb_buf_flush_enable(hba);
+	else
+		ufshcd_wb_buf_flush_disable(hba);
+
+}
+
+static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba)
+{
+	int ret;
+
+	if (!ufshcd_wb_sup(hba) || hba->wb_buf_flush_enabled)
+		return 0;
+
+	ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG,
+				      QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN, NULL);
+	if (ret)
+		dev_err(hba->dev, "%s WB - buf flush enable failed %d\n",
+			__func__, ret);
+	else
+		hba->wb_buf_flush_enabled = true;
+
+	dev_dbg(hba->dev, "WB - Flush enabled: %d\n", ret);
+	return ret;
+}
+
+static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba)
+{
+	int ret;
+
+	if (!ufshcd_wb_sup(hba) || !hba->wb_buf_flush_enabled)
+		return 0;
+
+	ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG,
+				      QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN, NULL);
+	if (ret) {
+		dev_warn(hba->dev, "%s: WB - buf flush disable failed %d\n",
+			 __func__, ret);
+	} else {
+		hba->wb_buf_flush_enabled = false;
+		dev_dbg(hba->dev, "WB - Flush disabled: %d\n", ret);
+	}
+
+	return ret;
+}
+
+static bool ufshcd_wb_presrv_usrspc_keep_vcc_on(struct ufs_hba *hba,
+						u32 avail_buf)
+{
+	u32 cur_buf;
+	int ret;
+
+	ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+					      QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE,
+					      0, 0, &cur_buf);
+	if (ret) {
+		dev_err(hba->dev, "%s dCurWriteBoosterBufferSize read failed %d\n",
+			__func__, ret);
+		return false;
+	}
+
+	if (!cur_buf) {
+		dev_info(hba->dev, "dCurWBBuf: %d WB disabled until free-space is available\n",
+			 cur_buf);
+		return false;
+	}
+	/* Let it continue to flush when >60% full */
+	if (avail_buf < UFS_WB_40_PERCENT_BUF_REMAIN)
+		return true;
+
+	return false;
+}
+
+static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
+{
+	int ret;
+	u32 avail_buf;
+
+	if (!ufshcd_wb_sup(hba))
+		return false;
+	/*
+	 * The ufs device needs the vcc to be ON to flush.
+	 * With user-space reduction enabled, it's enough to enable flush
+	 * by checking only the available buffer. The threshold
+	 * defined here is > 90% full.
+	 * With user-space preserved enabled, the current-buffer
+	 * should be checked too because the wb buffer size can reduce
+	 * when disk tends to be full. This info is provided by current
+	 * buffer (dCurrentWriteBoosterBufferSize). There's no point in
+	 * keeping vcc on when current buffer is empty.
+	 */
+	ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+				      QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE,
+				      0, 0, &avail_buf);
+	if (ret) {
+		dev_warn(hba->dev, "%s dAvailableWriteBoosterBufferSize read failed %d\n",
+			 __func__, ret);
+		return false;
+	}
+
+	if (!hba->dev_info.b_presrv_uspc_en) {
+		if (avail_buf <= UFS_WB_10_PERCENT_BUF_REMAIN)
+			return true;
+		return false;
+	}
+
+	return ufshcd_wb_presrv_usrspc_keep_vcc_on(hba, avail_buf);
+}
+
 /**
  * ufshcd_exception_event_handler - handle exceptions raised by device
  * @work: pointer to work data
@@ -6603,6 +6798,33 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
 	return ret;
 }
 
+static void ufshcd_wb_probe(struct ufs_hba *hba, u8 *desc_buf)
+{
+	hba->dev_info.d_ext_ufs_feature_sup =
+		get_unaligned_be32(desc_buf +
+				   DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP);
+	/*
+	 * WB may be supported but not configured while provisioning.
+	 * The spec says, in dedicated wb buffer mode,
+	 * a max of 1 lun would have wb buffer configured.
+	 * Now only shared buffer mode is supported.
+	 */
+	hba->dev_info.b_wb_buffer_type =
+		desc_buf[DEVICE_DESC_PARAM_WB_TYPE];
+
+	hba->dev_info.d_wb_alloc_units =
+		get_unaligned_be32(desc_buf +
+				   DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS);
+	hba->dev_info.b_presrv_uspc_en =
+		desc_buf[DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN];
+
+	if (!((hba->dev_info.d_ext_ufs_feature_sup &
+		 UFS_DEV_WRITE_BOOSTER_SUP) &&
+		hba->dev_info.b_wb_buffer_type &&
+	      hba->dev_info.d_wb_alloc_units))
+		hba->caps &= ~UFSHCD_CAP_WB_EN;
+}
+
 static int ufs_get_device_desc(struct ufs_hba *hba)
 {
 	int err;
@@ -6639,6 +6861,11 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
 				      desc_buf[DEVICE_DESC_PARAM_SPEC_VER + 1];
 
 	model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME];
+
+	/* Enable WB only for UFS-3.1 */
+	if (dev_info->wspecversion >= 0x310)
+		ufshcd_wb_probe(hba, desc_buf);
+
 	err = ufshcd_read_string_desc(hba, model_index,
 				      &dev_info->model, SD_ASCII_STD);
 	if (err < 0) {
@@ -7149,6 +7376,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async)
 	/* set the state as operational after switching to desired gear */
 	hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
 
+	ufshcd_wb_config(hba);
 	/* Enable Auto-Hibernate if configured */
 	ufshcd_auto_hibern8_enable(hba);
 
@@ -7809,12 +8037,16 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
 	 *
 	 * Ignore the error returned by ufshcd_toggle_vreg() as device is anyway
 	 * in low power state which would save some power.
+	 *
+	 * If Write Booster is enabled and the device needs to flush the WB
+	 * buffer OR if bkops status is urgent for WB, keep Vcc on.
 	 */
 	if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) &&
 	    !hba->dev_info.is_lu_power_on_wp) {
 		ufshcd_setup_vreg(hba, false);
 	} else if (!ufshcd_is_ufs_dev_active(hba)) {
-		ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
+		if (!hba->dev_info.keep_vcc_on)
+			ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
 		if (!ufshcd_is_link_active(hba)) {
 			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
 			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
@@ -7938,11 +8170,23 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 			/* make sure that auto bkops is disabled */
 			ufshcd_disable_auto_bkops(hba);
 		}
+		/*
+		 * With wb enabled, if the bkops is enabled or if the
+		 * configured WB type is 70% full, keep vcc ON
+		 * for the device to flush the wb buffer
+		 */
+		if ((hba->auto_bkops_enabled && ufshcd_wb_sup(hba)) ||
+		    ufshcd_wb_keep_vcc_on(hba))
+			hba->dev_info.keep_vcc_on = true;
+		else
+			hba->dev_info.keep_vcc_on = false;
+	} else if (!ufshcd_is_runtime_pm(pm_op)) {
+		hba->dev_info.keep_vcc_on = false;
 	}
 
 	if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
-	     ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
-	       !ufshcd_is_runtime_pm(pm_op))) {
+	    ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
+	    !ufshcd_is_runtime_pm(pm_op))) {
 		/* ensure that bkops is disabled */
 		ufshcd_disable_auto_bkops(hba);
 		ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
@@ -8055,9 +8299,13 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		else
 			goto vendor_suspend;
 	} else if (ufshcd_is_link_off(hba)) {
-		ret = ufshcd_host_reset_and_restore(hba);
 		/*
-		 * ufshcd_host_reset_and_restore() should have already
+		 * A full initialization of the host and the device is
+		 * required since the link was put to off during suspend.
+		 */
+		ret = ufshcd_reset_and_restore(hba);
+		/*
+		 * ufshcd_reset_and_restore() should have already
 		 * set the link state as active
 		 */
 		if (ret || !ufshcd_is_link_active(hba))
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 6ffc08ad85f6..056537e52c19 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -555,6 +555,13 @@ enum ufshcd_caps {
 	 * for userspace to control the power management.
 	 */
 	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
+
+	/*
+	 * This capability allows the host controller driver to turn-on
+	 * WriteBooster, if the underlying device supports it and is
+	 * provisioned to be used. This would increase the write performance.
+	 */
+	UFSHCD_CAP_WB_EN				= 1 << 7,
 };
 
 /**
@@ -727,6 +734,8 @@ struct ufs_hba {
 
 	struct device		bsg_dev;
 	struct request_queue	*bsg_queue;
+	bool wb_buf_flush_enabled;
+	bool wb_enabled;
 };
 
 /* Returns true if clocks can be gated. Otherwise false */
@@ -775,6 +784,11 @@ static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
 	return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit) ? true : false;
 }
 
+static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_WB_EN;
+}
+
 #define ufshcd_writel(hba, val, reg)	\
 	writel((val), (hba)->mmio_base + (reg))
 #define ufshcd_readl(hba, reg)	\
diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c
index 526e3215d8fe..ae1e248a8fb8 100644
--- a/drivers/slimbus/core.c
+++ b/drivers/slimbus/core.c
@@ -162,9 +162,8 @@ static int slim_add_device(struct slim_controller *ctrl,
 	sbdev->ctrl = ctrl;
 	INIT_LIST_HEAD(&sbdev->stream_list);
 	spin_lock_init(&sbdev->stream_list_lock);
-
-	if (node)
-		sbdev->dev.of_node = of_node_get(node);
+	sbdev->dev.of_node = of_node_get(node);
+	sbdev->dev.fwnode = of_fwnode_handle(node);
 
 	dev_set_name(&sbdev->dev, "%x:%x:%x:%x",
 				  sbdev->e_addr.manf_id,
@@ -283,6 +282,7 @@ EXPORT_SYMBOL_GPL(slim_register_controller);
 /* slim_remove_device: Remove the effect of slim_add_device() */
 static void slim_remove_device(struct slim_device *sbdev)
 {
+	of_node_put(sbdev->dev.of_node);
 	device_unregister(&sbdev->dev);
 }
 
diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index fc2575fef51b..743ee7b4e63f 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1361,12 +1361,10 @@ static int of_qcom_slim_ngd_register(struct device *parent,
 		ngd->pdev->driver_override = QCOM_SLIM_NGD_DRV_NAME;
 		ngd->pdev->dev.of_node = node;
 		ctrl->ngd = ngd;
-		platform_set_drvdata(ngd->pdev, ctrl);
 
 		platform_device_add(ngd->pdev);
 		ngd->base = ctrl->base + ngd->id * data->offset +
 					(ngd->id - 1) * data->size;
-		ctrl->ngd = ngd;
 
 		return 0;
 	}
@@ -1376,12 +1374,13 @@ static int of_qcom_slim_ngd_register(struct device *parent,
 
 static int qcom_slim_ngd_probe(struct platform_device *pdev)
 {
-	struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev);
 	struct device *dev = &pdev->dev;
+	struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev->parent);
 	int ret;
 
 	ctrl->ctrl.dev = dev;
 
+	platform_set_drvdata(pdev, ctrl);
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_set_autosuspend_delay(dev, QCOM_SLIM_NGD_AUTOSUSPEND);
 	pm_runtime_set_suspended(dev);
diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
index 719e1f189ebf..7b0759adb47d 100644
--- a/drivers/soc/imx/soc-imx8m.c
+++ b/drivers/soc/imx/soc-imx8m.c
@@ -53,11 +53,11 @@ static u32 __init imx8mq_soc_revision(void)
 	struct device_node *np;
 	void __iomem *ocotp_base;
 	u32 magic;
-	u32 rev = 0;
+	u32 rev;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-ocotp");
 	if (!np)
-		goto out;
+		return 0;
 
 	ocotp_base = of_iomap(np, 0);
 	WARN_ON(!ocotp_base);
@@ -78,9 +78,8 @@ static u32 __init imx8mq_soc_revision(void)
 	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
 
 	iounmap(ocotp_base);
-
-out:
 	of_node_put(np);
+
 	return rev;
 }
 
diff --git a/drivers/soc/kendryte/k210-sysctl.c b/drivers/soc/kendryte/k210-sysctl.c
index 4608fbca20e1..707019223dd8 100644
--- a/drivers/soc/kendryte/k210-sysctl.c
+++ b/drivers/soc/kendryte/k210-sysctl.c
@@ -246,3 +246,15 @@ static void __init k210_soc_early_init(const void *fdt)
 	iounmap(regs);
 }
 SOC_EARLY_INIT_DECLARE(generic_k210, "kendryte,k210", k210_soc_early_init);
+
+#ifdef CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN
+/*
+ * Generic entry for the default k210.dtb embedded DTB for boards with:
+ *   - Vendor ID: 0x4B5
+ *   - Arch ID: 0xE59889E6A5A04149 (= "Canaan AI" in UTF-8 encoded Chinese)
+ *   - Impl ID:	0x4D41495832303030 (= "MAIX2000")
+ * These values are reported by the SiPEED MAXDUINO, SiPEED MAIX GO and
+ * SiPEED Dan dock boards.
+ */
+SOC_BUILTIN_DTB_DECLARE(k210, 0x4B5, 0xE59889E6A5A04149, 0x4D41495832303030);
+#endif
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 2114b563478c..e84513318725 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -44,4 +44,12 @@ config MTK_SCPSYS
 	  Say yes here to add support for the MediaTek SCPSYS power domain
 	  driver.
 
+config MTK_MMSYS
+	bool "MediaTek MMSYS Support"
+	depends on COMMON_CLK_MT8173_MMSYS
+	default COMMON_CLK_MT8173_MMSYS
+	help
+	  Say yes here to add support for the MediaTek Multimedia
+	  Subsystem (MMSYS).
+
 endmenu
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index b01733074ad6..01f9f873634a 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
 obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
 obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
 obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
+obj-$(CONFIG_MTK_MMSYS) += mtk-mmsys.o
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
new file mode 100644
index 000000000000..05e322c9c301
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/soc/mediatek/mtk-mmsys.h>
+
+#include "../../gpu/drm/mediatek/mtk_drm_ddp.h"
+#include "../../gpu/drm/mediatek/mtk_drm_ddp_comp.h"
+
+#define DISP_REG_CONFIG_DISP_OVL0_MOUT_EN	0x040
+#define DISP_REG_CONFIG_DISP_OVL1_MOUT_EN	0x044
+#define DISP_REG_CONFIG_DISP_OD_MOUT_EN		0x048
+#define DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN	0x04c
+#define DISP_REG_CONFIG_DISP_UFOE_MOUT_EN	0x050
+#define DISP_REG_CONFIG_DISP_COLOR0_SEL_IN	0x084
+#define DISP_REG_CONFIG_DISP_COLOR1_SEL_IN	0x088
+#define DISP_REG_CONFIG_DSIE_SEL_IN		0x0a4
+#define DISP_REG_CONFIG_DSIO_SEL_IN		0x0a8
+#define DISP_REG_CONFIG_DPI_SEL_IN		0x0ac
+#define DISP_REG_CONFIG_DISP_RDMA2_SOUT		0x0b8
+#define DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN	0x0c4
+#define DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN	0x0c8
+#define DISP_REG_CONFIG_MMSYS_CG_CON0		0x100
+
+#define DISP_REG_CONFIG_DISP_OVL_MOUT_EN	0x030
+#define DISP_REG_CONFIG_OUT_SEL			0x04c
+#define DISP_REG_CONFIG_DSI_SEL			0x050
+#define DISP_REG_CONFIG_DPI_SEL			0x064
+
+#define OVL0_MOUT_EN_COLOR0			0x1
+#define OD_MOUT_EN_RDMA0			0x1
+#define OD1_MOUT_EN_RDMA1			BIT(16)
+#define UFOE_MOUT_EN_DSI0			0x1
+#define COLOR0_SEL_IN_OVL0			0x1
+#define OVL1_MOUT_EN_COLOR1			0x1
+#define GAMMA_MOUT_EN_RDMA1			0x1
+#define RDMA0_SOUT_DPI0				0x2
+#define RDMA0_SOUT_DPI1				0x3
+#define RDMA0_SOUT_DSI1				0x1
+#define RDMA0_SOUT_DSI2				0x4
+#define RDMA0_SOUT_DSI3				0x5
+#define RDMA1_SOUT_DPI0				0x2
+#define RDMA1_SOUT_DPI1				0x3
+#define RDMA1_SOUT_DSI1				0x1
+#define RDMA1_SOUT_DSI2				0x4
+#define RDMA1_SOUT_DSI3				0x5
+#define RDMA2_SOUT_DPI0				0x2
+#define RDMA2_SOUT_DPI1				0x3
+#define RDMA2_SOUT_DSI1				0x1
+#define RDMA2_SOUT_DSI2				0x4
+#define RDMA2_SOUT_DSI3				0x5
+#define DPI0_SEL_IN_RDMA1			0x1
+#define DPI0_SEL_IN_RDMA2			0x3
+#define DPI1_SEL_IN_RDMA1			(0x1 << 8)
+#define DPI1_SEL_IN_RDMA2			(0x3 << 8)
+#define DSI0_SEL_IN_RDMA1			0x1
+#define DSI0_SEL_IN_RDMA2			0x4
+#define DSI1_SEL_IN_RDMA1			0x1
+#define DSI1_SEL_IN_RDMA2			0x4
+#define DSI2_SEL_IN_RDMA1			(0x1 << 16)
+#define DSI2_SEL_IN_RDMA2			(0x4 << 16)
+#define DSI3_SEL_IN_RDMA1			(0x1 << 16)
+#define DSI3_SEL_IN_RDMA2			(0x4 << 16)
+#define COLOR1_SEL_IN_OVL1			0x1
+
+#define OVL_MOUT_EN_RDMA			0x1
+#define BLS_TO_DSI_RDMA1_TO_DPI1		0x8
+#define BLS_TO_DPI_RDMA1_TO_DSI			0x2
+#define DSI_SEL_IN_BLS				0x0
+#define DPI_SEL_IN_BLS				0x0
+#define DSI_SEL_IN_RDMA				0x1
+
+struct mtk_mmsys_driver_data {
+	const char *clk_driver;
+};
+
+static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
+	.clk_driver = "clk-mt8173-mm",
+};
+
+static unsigned int mtk_mmsys_ddp_mout_en(enum mtk_ddp_comp_id cur,
+					  enum mtk_ddp_comp_id next,
+					  unsigned int *addr)
+{
+	unsigned int value;
+
+	if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_COLOR0) {
+		*addr = DISP_REG_CONFIG_DISP_OVL0_MOUT_EN;
+		value = OVL0_MOUT_EN_COLOR0;
+	} else if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_RDMA0) {
+		*addr = DISP_REG_CONFIG_DISP_OVL_MOUT_EN;
+		value = OVL_MOUT_EN_RDMA;
+	} else if (cur == DDP_COMPONENT_OD0 && next == DDP_COMPONENT_RDMA0) {
+		*addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
+		value = OD_MOUT_EN_RDMA0;
+	} else if (cur == DDP_COMPONENT_UFOE && next == DDP_COMPONENT_DSI0) {
+		*addr = DISP_REG_CONFIG_DISP_UFOE_MOUT_EN;
+		value = UFOE_MOUT_EN_DSI0;
+	} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
+		*addr = DISP_REG_CONFIG_DISP_OVL1_MOUT_EN;
+		value = OVL1_MOUT_EN_COLOR1;
+	} else if (cur == DDP_COMPONENT_GAMMA && next == DDP_COMPONENT_RDMA1) {
+		*addr = DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN;
+		value = GAMMA_MOUT_EN_RDMA1;
+	} else if (cur == DDP_COMPONENT_OD1 && next == DDP_COMPONENT_RDMA1) {
+		*addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
+		value = OD1_MOUT_EN_RDMA1;
+	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI0) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+		value = RDMA0_SOUT_DPI0;
+	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI1) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+		value = RDMA0_SOUT_DPI1;
+	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI1) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+		value = RDMA0_SOUT_DSI1;
+	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI2) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+		value = RDMA0_SOUT_DSI2;
+	} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI3) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+		value = RDMA0_SOUT_DSI3;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI1) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
+		value = RDMA1_SOUT_DSI1;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI2) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
+		value = RDMA1_SOUT_DSI2;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI3) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
+		value = RDMA1_SOUT_DSI3;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
+		value = RDMA1_SOUT_DPI0;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
+		value = RDMA1_SOUT_DPI1;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
+		value = RDMA2_SOUT_DPI0;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
+		value = RDMA2_SOUT_DPI1;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI1) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
+		value = RDMA2_SOUT_DSI1;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
+		value = RDMA2_SOUT_DSI2;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) {
+		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
+		value = RDMA2_SOUT_DSI3;
+	} else {
+		value = 0;
+	}
+
+	return value;
+}
+
+static unsigned int mtk_mmsys_ddp_sel_in(enum mtk_ddp_comp_id cur,
+					 enum mtk_ddp_comp_id next,
+					 unsigned int *addr)
+{
+	unsigned int value;
+
+	if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_COLOR0) {
+		*addr = DISP_REG_CONFIG_DISP_COLOR0_SEL_IN;
+		value = COLOR0_SEL_IN_OVL0;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
+		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
+		value = DPI0_SEL_IN_RDMA1;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
+		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
+		value = DPI1_SEL_IN_RDMA1;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI0) {
+		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
+		value = DSI0_SEL_IN_RDMA1;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI1) {
+		*addr = DISP_REG_CONFIG_DSIO_SEL_IN;
+		value = DSI1_SEL_IN_RDMA1;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI2) {
+		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
+		value = DSI2_SEL_IN_RDMA1;
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI3) {
+		*addr = DISP_REG_CONFIG_DSIO_SEL_IN;
+		value = DSI3_SEL_IN_RDMA1;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
+		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
+		value = DPI0_SEL_IN_RDMA2;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
+		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
+		value = DPI1_SEL_IN_RDMA2;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI0) {
+		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
+		value = DSI0_SEL_IN_RDMA2;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI1) {
+		*addr = DISP_REG_CONFIG_DSIO_SEL_IN;
+		value = DSI1_SEL_IN_RDMA2;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) {
+		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
+		value = DSI2_SEL_IN_RDMA2;
+	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) {
+		*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
+		value = DSI3_SEL_IN_RDMA2;
+	} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
+		*addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
+		value = COLOR1_SEL_IN_OVL1;
+	} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
+		*addr = DISP_REG_CONFIG_DSI_SEL;
+		value = DSI_SEL_IN_BLS;
+	} else {
+		value = 0;
+	}
+
+	return value;
+}
+
+static void mtk_mmsys_ddp_sout_sel(void __iomem *config_regs,
+				   enum mtk_ddp_comp_id cur,
+				   enum mtk_ddp_comp_id next)
+{
+	if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
+		writel_relaxed(BLS_TO_DSI_RDMA1_TO_DPI1,
+			       config_regs + DISP_REG_CONFIG_OUT_SEL);
+	} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
+		writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
+			       config_regs + DISP_REG_CONFIG_OUT_SEL);
+		writel_relaxed(DSI_SEL_IN_RDMA,
+			       config_regs + DISP_REG_CONFIG_DSI_SEL);
+		writel_relaxed(DPI_SEL_IN_BLS,
+			       config_regs + DISP_REG_CONFIG_DPI_SEL);
+	}
+}
+
+void mtk_mmsys_ddp_connect(struct device *dev,
+			   enum mtk_ddp_comp_id cur,
+			   enum mtk_ddp_comp_id next)
+{
+	void __iomem *config_regs = dev_get_drvdata(dev);
+	unsigned int addr, value, reg;
+
+	value = mtk_mmsys_ddp_mout_en(cur, next, &addr);
+	if (value) {
+		reg = readl_relaxed(config_regs + addr) | value;
+		writel_relaxed(reg, config_regs + addr);
+	}
+
+	mtk_mmsys_ddp_sout_sel(config_regs, cur, next);
+
+	value = mtk_mmsys_ddp_sel_in(cur, next, &addr);
+	if (value) {
+		reg = readl_relaxed(config_regs + addr) | value;
+		writel_relaxed(reg, config_regs + addr);
+	}
+}
+EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
+
+void mtk_mmsys_ddp_disconnect(struct device *dev,
+			      enum mtk_ddp_comp_id cur,
+			      enum mtk_ddp_comp_id next)
+{
+	void __iomem *config_regs = dev_get_drvdata(dev);
+	unsigned int addr, value, reg;
+
+	value = mtk_mmsys_ddp_mout_en(cur, next, &addr);
+	if (value) {
+		reg = readl_relaxed(config_regs + addr) & ~value;
+		writel_relaxed(reg, config_regs + addr);
+	}
+
+	value = mtk_mmsys_ddp_sel_in(cur, next, &addr);
+	if (value) {
+		reg = readl_relaxed(config_regs + addr) & ~value;
+		writel_relaxed(reg, config_regs + addr);
+	}
+}
+EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
+
+static int mtk_mmsys_probe(struct platform_device *pdev)
+{
+	const struct mtk_mmsys_driver_data *data;
+	struct device *dev = &pdev->dev;
+	struct platform_device *clks;
+	struct platform_device *drm;
+	void __iomem *config_regs;
+	struct resource *mem;
+	int ret;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	config_regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(config_regs)) {
+		ret = PTR_ERR(config_regs);
+		dev_err(dev, "Failed to ioremap mmsys-config resource: %d\n",
+			ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, config_regs);
+
+	data = of_device_get_match_data(&pdev->dev);
+
+	clks = platform_device_register_data(&pdev->dev, data->clk_driver,
+					     PLATFORM_DEVID_AUTO, NULL, 0);
+	if (IS_ERR(clks))
+		return PTR_ERR(clks);
+
+	drm = platform_device_register_data(&pdev->dev, "mediatek-drm",
+					    PLATFORM_DEVID_AUTO, NULL, 0);
+	if (IS_ERR(drm))
+		return PTR_ERR(drm);
+
+	return 0;
+}
+
+static const struct of_device_id of_match_mtk_mmsys[] = {
+	{
+		.compatible = "mediatek,mt8173-mmsys",
+		.data = &mt8173_mmsys_driver_data,
+	},
+	{ }
+};
+
+static struct platform_driver mtk_mmsys_drv = {
+	.driver = {
+		.name = "mtk-mmsys",
+		.of_match_table = of_match_mtk_mmsys,
+	},
+	.probe = mtk_mmsys_probe,
+};
+
+builtin_platform_driver(mtk_mmsys_drv);
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index bf42a17a45de..5140bd82f1be 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -35,15 +35,6 @@ config QCOM_GENI_SE
 	  driver is also used to manage the common aspects of multiple Serial
 	  Engines present in the QUP.
 
-config QCOM_GLINK_SSR
-	tristate "Qualcomm Glink SSR driver"
-	depends on RPMSG
-	depends on QCOM_RPROC_COMMON
-	help
-	  Say y here to enable GLINK SSR support. The GLINK SSR driver
-	  implements the SSR protocol for notifying the remote processor about
-	  neighboring subsystems going up or down.
-
 config QCOM_GSBI
 	tristate "QCOM General Serial Bus Interface"
 	depends on ARCH_QCOM || COMPILE_TEST
@@ -117,7 +108,7 @@ config QCOM_RPMH
 	  help apply the aggregated state on the resource.
 
 config QCOM_RPMHPD
-	bool "Qualcomm RPMh Power domain driver"
+	tristate "Qualcomm RPMh Power domain driver"
 	depends on QCOM_RPMH && QCOM_COMMAND_DB
 	help
 	  QCOM RPMh Power domain driver to support power-domains with
@@ -126,8 +117,8 @@ config QCOM_RPMHPD
 	  for the voltage rail.
 
 config QCOM_RPMPD
-	bool "Qualcomm RPM Power domain driver"
-	depends on QCOM_SMD_RPM=y
+	tristate "Qualcomm RPM Power domain driver"
+	depends on QCOM_SMD_RPM
 	help
 	  QCOM RPM Power domain driver to support power-domains with
 	  performance states. The driver communicates a performance state
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 5d6b83dc58e8..e9cacc9ad401 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -3,7 +3,6 @@ CFLAGS_rpmh-rsc.o := -I$(src)
 obj-$(CONFIG_QCOM_AOSS_QMP) +=	qcom_aoss.o
 obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
 obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
-obj-$(CONFIG_QCOM_GLINK_SSR) +=	glink_ssr.o
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
diff --git a/drivers/soc/qcom/cmd-db.c b/drivers/soc/qcom/cmd-db.c
index f6c3d17b05c7..fc5610603b17 100644
--- a/drivers/soc/qcom/cmd-db.c
+++ b/drivers/soc/qcom/cmd-db.c
@@ -1,12 +1,13 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. */
 
+#include <linux/debugfs.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 #include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
+#include <linux/seq_file.h>
 #include <linux/types.h>
 
 #include <soc/qcom/cmd-db.h>
@@ -236,6 +237,77 @@ enum cmd_db_hw_type cmd_db_read_slave_id(const char *id)
 }
 EXPORT_SYMBOL(cmd_db_read_slave_id);
 
+#ifdef CONFIG_DEBUG_FS
+static int cmd_db_debugfs_dump(struct seq_file *seq, void *p)
+{
+	int i, j;
+	const struct rsc_hdr *rsc;
+	const struct entry_header *ent;
+	const char *name;
+	u16 len, version;
+	u8 major, minor;
+
+	seq_puts(seq, "Command DB DUMP\n");
+
+	for (i = 0; i < MAX_SLV_ID; i++) {
+		rsc = &cmd_db_header->header[i];
+		if (!rsc->slv_id)
+			break;
+
+		switch (le16_to_cpu(rsc->slv_id)) {
+		case CMD_DB_HW_ARC:
+			name = "ARC";
+			break;
+		case CMD_DB_HW_VRM:
+			name = "VRM";
+			break;
+		case CMD_DB_HW_BCM:
+			name = "BCM";
+			break;
+		default:
+			name = "Unknown";
+			break;
+		}
+
+		version = le16_to_cpu(rsc->version);
+		major = version >> 8;
+		minor = version;
+
+		seq_printf(seq, "Slave %s (v%u.%u)\n", name, major, minor);
+		seq_puts(seq, "-------------------------\n");
+
+		ent = rsc_to_entry_header(rsc);
+		for (j = 0; j < le16_to_cpu(rsc->cnt); j++, ent++) {
+			seq_printf(seq, "0x%05x: %*pEp", le32_to_cpu(ent->addr),
+				   (int)sizeof(ent->id), ent->id);
+
+			len = le16_to_cpu(ent->len);
+			if (len) {
+				seq_printf(seq, " [%*ph]",
+					   len, rsc_offset(rsc, ent));
+			}
+			seq_putc(seq, '\n');
+		}
+	}
+
+	return 0;
+}
+
+static int open_cmd_db_debugfs(struct inode *inode, struct file *file)
+{
+	return single_open(file, cmd_db_debugfs_dump, inode->i_private);
+}
+#endif
+
+static const struct file_operations cmd_db_debugfs_ops = {
+#ifdef CONFIG_DEBUG_FS
+	.open = open_cmd_db_debugfs,
+#endif
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
 static int cmd_db_dev_probe(struct platform_device *pdev)
 {
 	struct reserved_mem *rmem;
@@ -259,12 +331,14 @@ static int cmd_db_dev_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	debugfs_create_file("cmd-db", 0400, NULL, NULL, &cmd_db_debugfs_ops);
+
 	return 0;
 }
 
 static const struct of_device_id cmd_db_match_table[] = {
 	{ .compatible = "qcom,cmd-db" },
-	{ },
+	{ }
 };
 
 static struct platform_driver cmd_db_dev_driver = {
diff --git a/drivers/soc/qcom/glink_ssr.c b/drivers/soc/qcom/glink_ssr.c
deleted file mode 100644
index d7babe3d67bc..000000000000
--- a/drivers/soc/qcom/glink_ssr.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Linaro Ltd.
- */
-
-#include <linux/completion.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/rpmsg.h>
-#include <linux/remoteproc/qcom_rproc.h>
-
-/**
- * struct do_cleanup_msg - The data structure for an SSR do_cleanup message
- * version:     The G-Link SSR protocol version
- * command:     The G-Link SSR command - do_cleanup
- * seq_num:     Sequence number
- * name_len:    Length of the name of the subsystem being restarted
- * name:        G-Link edge name of the subsystem being restarted
- */
-struct do_cleanup_msg {
-	__le32 version;
-	__le32 command;
-	__le32 seq_num;
-	__le32 name_len;
-	char name[32];
-};
-
-/**
- * struct cleanup_done_msg - The data structure for an SSR cleanup_done message
- * version:     The G-Link SSR protocol version
- * response:    The G-Link SSR response to a do_cleanup command, cleanup_done
- * seq_num:     Sequence number
- */
-struct cleanup_done_msg {
-	__le32 version;
-	__le32 response;
-	__le32 seq_num;
-};
-
-/**
- * G-Link SSR protocol commands
- */
-#define GLINK_SSR_DO_CLEANUP	0
-#define GLINK_SSR_CLEANUP_DONE	1
-
-struct glink_ssr {
-	struct device *dev;
-	struct rpmsg_endpoint *ept;
-
-	struct notifier_block nb;
-
-	u32 seq_num;
-	struct completion completion;
-};
-
-static int qcom_glink_ssr_callback(struct rpmsg_device *rpdev,
-				   void *data, int len, void *priv, u32 addr)
-{
-	struct cleanup_done_msg *msg = data;
-	struct glink_ssr *ssr = dev_get_drvdata(&rpdev->dev);
-
-	if (len < sizeof(*msg)) {
-		dev_err(ssr->dev, "message too short\n");
-		return -EINVAL;
-	}
-
-	if (le32_to_cpu(msg->version) != 0)
-		return -EINVAL;
-
-	if (le32_to_cpu(msg->response) != GLINK_SSR_CLEANUP_DONE)
-		return 0;
-
-	if (le32_to_cpu(msg->seq_num) != ssr->seq_num) {
-		dev_err(ssr->dev, "invalid sequence number of response\n");
-		return -EINVAL;
-	}
-
-	complete(&ssr->completion);
-
-	return 0;
-}
-
-static int qcom_glink_ssr_notify(struct notifier_block *nb, unsigned long event,
-				 void *data)
-{
-	struct glink_ssr *ssr = container_of(nb, struct glink_ssr, nb);
-	struct do_cleanup_msg msg;
-	char *ssr_name = data;
-	int ret;
-
-	ssr->seq_num++;
-	reinit_completion(&ssr->completion);
-
-	memset(&msg, 0, sizeof(msg));
-	msg.command = cpu_to_le32(GLINK_SSR_DO_CLEANUP);
-	msg.seq_num = cpu_to_le32(ssr->seq_num);
-	msg.name_len = cpu_to_le32(strlen(ssr_name));
-	strlcpy(msg.name, ssr_name, sizeof(msg.name));
-
-	ret = rpmsg_send(ssr->ept, &msg, sizeof(msg));
-	if (ret < 0)
-		dev_err(ssr->dev, "failed to send cleanup message\n");
-
-	ret = wait_for_completion_timeout(&ssr->completion, HZ);
-	if (!ret)
-		dev_err(ssr->dev, "timeout waiting for cleanup done message\n");
-
-	return NOTIFY_DONE;
-}
-
-static int qcom_glink_ssr_probe(struct rpmsg_device *rpdev)
-{
-	struct glink_ssr *ssr;
-
-	ssr = devm_kzalloc(&rpdev->dev, sizeof(*ssr), GFP_KERNEL);
-	if (!ssr)
-		return -ENOMEM;
-
-	init_completion(&ssr->completion);
-
-	ssr->dev = &rpdev->dev;
-	ssr->ept = rpdev->ept;
-	ssr->nb.notifier_call = qcom_glink_ssr_notify;
-
-	dev_set_drvdata(&rpdev->dev, ssr);
-
-	return qcom_register_ssr_notifier(&ssr->nb);
-}
-
-static void qcom_glink_ssr_remove(struct rpmsg_device *rpdev)
-{
-	struct glink_ssr *ssr = dev_get_drvdata(&rpdev->dev);
-
-	qcom_unregister_ssr_notifier(&ssr->nb);
-}
-
-static const struct rpmsg_device_id qcom_glink_ssr_match[] = {
-	{ "glink_ssr" },
-	{}
-};
-
-static struct rpmsg_driver qcom_glink_ssr_driver = {
-	.probe = qcom_glink_ssr_probe,
-	.remove = qcom_glink_ssr_remove,
-	.callback = qcom_glink_ssr_callback,
-	.id_table = qcom_glink_ssr_match,
-	.drv = {
-		.name = "qcom_glink_ssr",
-	},
-};
-module_rpmsg_driver(qcom_glink_ssr_driver);
-
-MODULE_ALIAS("rpmsg:glink_ssr");
-MODULE_DESCRIPTION("Qualcomm GLINK SSR notifier");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/pdr_interface.c b/drivers/soc/qcom/pdr_interface.c
index 17ad3b8698e1..bdcf16f88a97 100644
--- a/drivers/soc/qcom/pdr_interface.c
+++ b/drivers/soc/qcom/pdr_interface.c
@@ -155,10 +155,6 @@ static int pdr_register_listener(struct pdr_handle *pdr,
 		return ret;
 	}
 
-	if ((int)resp.curr_state < INT_MIN || (int)resp.curr_state > INT_MAX)
-		pr_err("PDR: %s notification state invalid: 0x%x\n",
-		       pds->service_path, resp.curr_state);
-
 	pds->state = resp.curr_state;
 
 	return 0;
diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index 6eec32b97f83..dba8510c0669 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -22,16 +22,24 @@ struct rsc_drv;
  * struct tcs_group: group of Trigger Command Sets (TCS) to send state requests
  * to the controller
  *
- * @drv:       the controller
- * @type:      type of the TCS in this group - active, sleep, wake
- * @mask:      mask of the TCSes relative to all the TCSes in the RSC
- * @offset:    start of the TCS group relative to the TCSes in the RSC
- * @num_tcs:   number of TCSes in this type
- * @ncpt:      number of commands in each TCS
- * @lock:      lock for synchronizing this TCS writes
- * @req:       requests that are sent from the TCS
- * @cmd_cache: flattened cache of cmds in sleep/wake TCS
- * @slots:     indicates which of @cmd_addr are occupied
+ * @drv:       The controller.
+ * @type:      Type of the TCS in this group - active, sleep, wake.
+ * @mask:      Mask of the TCSes relative to all the TCSes in the RSC.
+ * @offset:    Start of the TCS group relative to the TCSes in the RSC.
+ * @num_tcs:   Number of TCSes in this type.
+ * @ncpt:      Number of commands in each TCS.
+ * @lock:      Lock for synchronizing this TCS writes.
+ * @req:       Requests that are sent from the TCS; only used for ACTIVE_ONLY
+ *             transfers (could be on a wake/sleep TCS if we are borrowing for
+ *             an ACTIVE_ONLY transfer).
+ *             Start: grab drv->lock, set req, set tcs_in_use, drop drv->lock,
+ *                    trigger
+ *             End: get irq, access req,
+ *                  grab drv->lock, clear tcs_in_use, drop drv->lock
+ * @slots:     Indicates which of @cmd_addr are occupied; only used for
+ *             SLEEP / WAKE TCSs.  Things are tightly packed in the
+ *             case that (ncpt < MAX_CMDS_PER_TCS).  That is if ncpt = 2 and
+ *             MAX_CMDS_PER_TCS = 16 then bit[2] = the first bit in 2nd TCS.
  */
 struct tcs_group {
 	struct rsc_drv *drv;
@@ -42,7 +50,6 @@ struct tcs_group {
 	int ncpt;
 	spinlock_t lock;
 	const struct tcs_request *req[MAX_TCS_PER_TYPE];
-	u32 *cmd_cache;
 	DECLARE_BITMAP(slots, MAX_TCS_SLOTS);
 };
 
@@ -84,30 +91,48 @@ struct rpmh_ctrlr {
  * struct rsc_drv: the Direct Resource Voter (DRV) of the
  * Resource State Coordinator controller (RSC)
  *
- * @name:       controller identifier
- * @tcs_base:   start address of the TCS registers in this controller
- * @id:         instance id in the controller (Direct Resource Voter)
- * @num_tcs:    number of TCSes in this DRV
- * @tcs:        TCS groups
- * @tcs_in_use: s/w state of the TCS
- * @lock:       synchronize state of the controller
- * @client:     handle to the DRV's client.
+ * @name:               Controller identifier.
+ * @tcs_base:           Start address of the TCS registers in this controller.
+ * @id:                 Instance id in the controller (Direct Resource Voter).
+ * @num_tcs:            Number of TCSes in this DRV.
+ * @rsc_pm:             CPU PM notifier for controller.
+ *                      Used when solver mode is not present.
+ * @cpus_entered_pm:    CPU mask for cpus in idle power collapse.
+ *                      Used when solver mode is not present.
+ * @tcs:                TCS groups.
+ * @tcs_in_use:         S/W state of the TCS; only set for ACTIVE_ONLY
+ *                      transfers, but might show a sleep/wake TCS in use if
+ *                      it was borrowed for an active_only transfer.  You
+ *                      must hold both the lock in this struct and the
+ *                      tcs_lock for the TCS in order to mark a TCS as
+ *                      in-use, but you only need the lock in this structure
+ *                      (aka the drv->lock) to mark one freed.
+ * @lock:               Synchronize state of the controller.  If you will be
+ *                      grabbing this lock and a tcs_lock at the same time,
+ *                      grab the tcs_lock first so we always have a
+ *                      consistent lock ordering.
+ * @pm_lock:            Synchronize during PM notifications.
+ *                      Used when solver mode is not present.
+ * @client:             Handle to the DRV's client.
  */
 struct rsc_drv {
 	const char *name;
 	void __iomem *tcs_base;
 	int id;
 	int num_tcs;
+	struct notifier_block rsc_pm;
+	struct cpumask cpus_entered_pm;
 	struct tcs_group tcs[TCS_TYPE_NR];
 	DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR);
 	spinlock_t lock;
+	spinlock_t pm_lock;
 	struct rpmh_ctrlr client;
 };
 
 int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg);
 int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv,
 			     const struct tcs_request *msg);
-int rpmh_rsc_invalidate(struct rsc_drv *drv);
+void rpmh_rsc_invalidate(struct rsc_drv *drv);
 
 void rpmh_tx_done(const struct tcs_request *msg, int r);
 int rpmh_flush(struct rpmh_ctrlr *ctrlr);
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index b71822131f59..732316bb67dc 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -6,6 +6,7 @@
 #define pr_fmt(fmt) "%s " fmt, KBUILD_MODNAME
 
 #include <linux/atomic.h>
+#include <linux/cpu_pm.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -30,21 +31,41 @@
 #define RSC_DRV_TCS_OFFSET		672
 #define RSC_DRV_CMD_OFFSET		20
 
-/* DRV Configuration Information Register */
+/* DRV HW Solver Configuration Information Register */
+#define DRV_SOLVER_CONFIG		0x04
+#define DRV_HW_SOLVER_MASK		1
+#define DRV_HW_SOLVER_SHIFT		24
+
+/* DRV TCS Configuration Information Register */
 #define DRV_PRNT_CHLD_CONFIG		0x0C
 #define DRV_NUM_TCS_MASK		0x3F
 #define DRV_NUM_TCS_SHIFT		6
 #define DRV_NCPT_MASK			0x1F
 #define DRV_NCPT_SHIFT			27
 
-/* Register offsets */
+/* Offsets for common TCS Registers, one bit per TCS */
 #define RSC_DRV_IRQ_ENABLE		0x00
 #define RSC_DRV_IRQ_STATUS		0x04
-#define RSC_DRV_IRQ_CLEAR		0x08
-#define RSC_DRV_CMD_WAIT_FOR_CMPL	0x10
+#define RSC_DRV_IRQ_CLEAR		0x08	/* w/o; write 1 to clear */
+
+/*
+ * Offsets for per TCS Registers.
+ *
+ * TCSes start at 0x10 from tcs_base and are stored one after another.
+ * Multiply tcs_id by RSC_DRV_TCS_OFFSET to find a given TCS and add one
+ * of the below to find a register.
+ */
+#define RSC_DRV_CMD_WAIT_FOR_CMPL	0x10	/* 1 bit per command */
 #define RSC_DRV_CONTROL			0x14
-#define RSC_DRV_STATUS			0x18
-#define RSC_DRV_CMD_ENABLE		0x1C
+#define RSC_DRV_STATUS			0x18	/* zero if tcs is busy */
+#define RSC_DRV_CMD_ENABLE		0x1C	/* 1 bit per command */
+
+/*
+ * Offsets for per command in a TCS.
+ *
+ * Commands (up to 16) start at 0x30 in a TCS; multiply command index
+ * by RSC_DRV_CMD_OFFSET and add one of the below to find a register.
+ */
 #define RSC_DRV_CMD_MSGID		0x30
 #define RSC_DRV_CMD_ADDR		0x34
 #define RSC_DRV_CMD_DATA		0x38
@@ -61,28 +82,87 @@
 #define CMD_STATUS_ISSUED		BIT(8)
 #define CMD_STATUS_COMPL		BIT(16)
 
-static u32 read_tcs_reg(struct rsc_drv *drv, int reg, int tcs_id, int cmd_id)
+/*
+ * Here's a high level overview of how all the registers in RPMH work
+ * together:
+ *
+ * - The main rpmh-rsc address is the base of a register space that can
+ *   be used to find overall configuration of the hardware
+ *   (DRV_PRNT_CHLD_CONFIG). Also found within the rpmh-rsc register
+ *   space are all the TCS blocks. The offset of the TCS blocks is
+ *   specified in the device tree by "qcom,tcs-offset" and used to
+ *   compute tcs_base.
+ * - TCS blocks come one after another. Type, count, and order are
+ *   specified by the device tree as "qcom,tcs-config".
+ * - Each TCS block has some registers, then space for up to 16 commands.
+ *   Note that though address space is reserved for 16 commands, fewer
+ *   might be present. See ncpt (num cmds per TCS).
+ *
+ * Here's a picture:
+ *
+ *  +---------------------------------------------------+
+ *  |RSC                                                |
+ *  | ctrl                                              |
+ *  |                                                   |
+ *  | Drvs:                                             |
+ *  | +-----------------------------------------------+ |
+ *  | |DRV0                                           | |
+ *  | | ctrl/config                                   | |
+ *  | | IRQ                                           | |
+ *  | |                                               | |
+ *  | | TCSes:                                        | |
+ *  | | +------------------------------------------+  | |
+ *  | | |TCS0  |  |  |  |  |  |  |  |  |  |  |  |  |  | |
+ *  | | | ctrl | 0| 1| 2| 3| 4| 5| .| .| .| .|14|15|  | |
+ *  | | |      |  |  |  |  |  |  |  |  |  |  |  |  |  | |
+ *  | | +------------------------------------------+  | |
+ *  | | +------------------------------------------+  | |
+ *  | | |TCS1  |  |  |  |  |  |  |  |  |  |  |  |  |  | |
+ *  | | | ctrl | 0| 1| 2| 3| 4| 5| .| .| .| .|14|15|  | |
+ *  | | |      |  |  |  |  |  |  |  |  |  |  |  |  |  | |
+ *  | | +------------------------------------------+  | |
+ *  | | +------------------------------------------+  | |
+ *  | | |TCS2  |  |  |  |  |  |  |  |  |  |  |  |  |  | |
+ *  | | | ctrl | 0| 1| 2| 3| 4| 5| .| .| .| .|14|15|  | |
+ *  | | |      |  |  |  |  |  |  |  |  |  |  |  |  |  | |
+ *  | | +------------------------------------------+  | |
+ *  | |                    ......                     | |
+ *  | +-----------------------------------------------+ |
+ *  | +-----------------------------------------------+ |
+ *  | |DRV1                                           | |
+ *  | | (same as DRV0)                                | |
+ *  | +-----------------------------------------------+ |
+ *  |                      ......                       |
+ *  +---------------------------------------------------+
+ */
+
+static u32 read_tcs_cmd(struct rsc_drv *drv, int reg, int tcs_id, int cmd_id)
 {
-	return readl_relaxed(drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id +
+	return readl_relaxed(drv->tcs_base + RSC_DRV_TCS_OFFSET * tcs_id + reg +
 			     RSC_DRV_CMD_OFFSET * cmd_id);
 }
 
+static u32 read_tcs_reg(struct rsc_drv *drv, int reg, int tcs_id)
+{
+	return readl_relaxed(drv->tcs_base + RSC_DRV_TCS_OFFSET * tcs_id + reg);
+}
+
 static void write_tcs_cmd(struct rsc_drv *drv, int reg, int tcs_id, int cmd_id,
 			  u32 data)
 {
-	writel_relaxed(data, drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id +
+	writel_relaxed(data, drv->tcs_base + RSC_DRV_TCS_OFFSET * tcs_id + reg +
 		       RSC_DRV_CMD_OFFSET * cmd_id);
 }
 
 static void write_tcs_reg(struct rsc_drv *drv, int reg, int tcs_id, u32 data)
 {
-	writel_relaxed(data, drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id);
+	writel_relaxed(data, drv->tcs_base + RSC_DRV_TCS_OFFSET * tcs_id + reg);
 }
 
 static void write_tcs_reg_sync(struct rsc_drv *drv, int reg, int tcs_id,
 			       u32 data)
 {
-	writel(data, drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id);
+	writel(data, drv->tcs_base + RSC_DRV_TCS_OFFSET * tcs_id + reg);
 	for (;;) {
 		if (data == readl(drv->tcs_base + reg +
 				  RSC_DRV_TCS_OFFSET * tcs_id))
@@ -91,64 +171,84 @@ static void write_tcs_reg_sync(struct rsc_drv *drv, int reg, int tcs_id,
 	}
 }
 
+/**
+ * tcs_is_free() - Return if a TCS is totally free.
+ * @drv:    The RSC controller.
+ * @tcs_id: The global ID of this TCS.
+ *
+ * Returns true if nobody has claimed this TCS (by setting tcs_in_use).
+ *
+ * Context: Must be called with the drv->lock held or the tcs_lock for the TCS
+ *          being tested. If only the tcs_lock is held then it is possible that
+ *          this function will return that a tcs is still busy when it has been
+ *          recently been freed but it will never return free when a TCS is
+ *          actually in use.
+ *
+ * Return: true if the given TCS is free.
+ */
 static bool tcs_is_free(struct rsc_drv *drv, int tcs_id)
 {
-	return !test_bit(tcs_id, drv->tcs_in_use) &&
-	       read_tcs_reg(drv, RSC_DRV_STATUS, tcs_id, 0);
-}
-
-static struct tcs_group *get_tcs_of_type(struct rsc_drv *drv, int type)
-{
-	return &drv->tcs[type];
+	return !test_bit(tcs_id, drv->tcs_in_use);
 }
 
-static int tcs_invalidate(struct rsc_drv *drv, int type)
+/**
+ * tcs_invalidate() - Invalidate all TCSes of the given type (sleep or wake).
+ * @drv:  The RSC controller.
+ * @type: SLEEP_TCS or WAKE_TCS
+ *
+ * This will clear the "slots" variable of the given tcs_group and also
+ * tell the hardware to forget about all entries.
+ *
+ * The caller must ensure that no other RPMH actions are happening when this
+ * function is called, since otherwise the device may immediately become
+ * used again even before this function exits.
+ */
+static void tcs_invalidate(struct rsc_drv *drv, int type)
 {
 	int m;
-	struct tcs_group *tcs;
-
-	tcs = get_tcs_of_type(drv, type);
+	struct tcs_group *tcs = &drv->tcs[type];
 
-	spin_lock(&tcs->lock);
-	if (bitmap_empty(tcs->slots, MAX_TCS_SLOTS)) {
-		spin_unlock(&tcs->lock);
-		return 0;
-	}
+	/* Caller ensures nobody else is running so no lock */
+	if (bitmap_empty(tcs->slots, MAX_TCS_SLOTS))
+		return;
 
 	for (m = tcs->offset; m < tcs->offset + tcs->num_tcs; m++) {
-		if (!tcs_is_free(drv, m)) {
-			spin_unlock(&tcs->lock);
-			return -EAGAIN;
-		}
 		write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, m, 0);
 		write_tcs_reg_sync(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, m, 0);
 	}
 	bitmap_zero(tcs->slots, MAX_TCS_SLOTS);
-	spin_unlock(&tcs->lock);
-
-	return 0;
 }
 
 /**
- * rpmh_rsc_invalidate - Invalidate sleep and wake TCSes
+ * rpmh_rsc_invalidate() - Invalidate sleep and wake TCSes.
+ * @drv: The RSC controller.
  *
- * @drv: the RSC controller
+ * The caller must ensure that no other RPMH actions are happening when this
+ * function is called, since otherwise the device may immediately become
+ * used again even before this function exits.
  */
-int rpmh_rsc_invalidate(struct rsc_drv *drv)
+void rpmh_rsc_invalidate(struct rsc_drv *drv)
 {
-	int ret;
-
-	ret = tcs_invalidate(drv, SLEEP_TCS);
-	if (!ret)
-		ret = tcs_invalidate(drv, WAKE_TCS);
-
-	return ret;
+	tcs_invalidate(drv, SLEEP_TCS);
+	tcs_invalidate(drv, WAKE_TCS);
 }
 
+/**
+ * get_tcs_for_msg() - Get the tcs_group used to send the given message.
+ * @drv: The RSC controller.
+ * @msg: The message we want to send.
+ *
+ * This is normally pretty straightforward except if we are trying to send
+ * an ACTIVE_ONLY message but don't have any active_only TCSes.
+ *
+ * Called without drv->lock held and with no tcs_lock locks held.
+ *
+ * Return: A pointer to a tcs_group or an ERR_PTR.
+ */
 static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
 					 const struct tcs_request *msg)
 {
-	int type, ret;
+	int type;
 	struct tcs_group *tcs;
 
 	switch (msg->state) {
@@ -168,24 +268,33 @@ static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
 	/*
 	 * If we are making an active request on a RSC that does not have a
 	 * dedicated TCS for active state use, then re-purpose a wake TCS to
-	 * send active votes.
-	 * NOTE: The driver must be aware that this RSC does not have a
-	 * dedicated AMC, and therefore would invalidate the sleep and wake
-	 * TCSes before making an active state request.
+	 * send active votes. This is safe because we ensure any active-only
+	 * transfers have finished before we use it (maybe by running from
+	 * the last CPU in PM code).
 	 */
-	tcs = get_tcs_of_type(drv, type);
-	if (msg->state == RPMH_ACTIVE_ONLY_STATE && !tcs->num_tcs) {
-		tcs = get_tcs_of_type(drv, WAKE_TCS);
-		if (tcs->num_tcs) {
-			ret = rpmh_rsc_invalidate(drv);
-			if (ret)
-				return ERR_PTR(ret);
-		}
-	}
+	tcs = &drv->tcs[type];
+	if (msg->state == RPMH_ACTIVE_ONLY_STATE && !tcs->num_tcs)
+		tcs = &drv->tcs[WAKE_TCS];
 
 	return tcs;
 }
 
+/**
+ * get_req_from_tcs() - Get a stashed request that was xfering on the given TCS.
+ * @drv:    The RSC controller.
+ * @tcs_id: The global ID of this TCS.
+ *
+ * For ACTIVE_ONLY transfers we want to call back into the client when the
+ * transfer finishes. To do this we need the "request" that the client
+ * originally provided us. This function grabs the request that we stashed
+ * when we started the transfer.
+ *
+ * This only makes sense for ACTIVE_ONLY transfers since those are the only
+ * ones we track sending (the only ones we enable interrupts for and the only
+ * ones we call back to the client for).
+ *
+ * Return: The stashed request.
+ */
 static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
 						  int tcs_id)
 {
@@ -202,7 +311,76 @@ static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
 }
 
 /**
- * tcs_tx_done: TX Done interrupt handler
+ * __tcs_set_trigger() - Start xfer on a TCS or unset trigger on a borrowed TCS
+ * @drv:     The controller.
+ * @tcs_id:  The global ID of this TCS.
+ * @trigger: If true then untrigger/retrigger. If false then just untrigger.
+ *
+ * In the normal case we only ever call with "trigger=true" to start a
+ * transfer. That will un-trigger/disable the TCS from the last transfer
+ * then trigger/enable for this transfer.
+ *
+ * If we borrowed a wake TCS for an active-only transfer we'll also call
+ * this function with "trigger=false" to just do the un-trigger/disable
+ * before using the TCS for wake purposes again.
+ *
+ * Note that the AP is only in charge of triggering active-only transfers.
+ * The AP never triggers sleep/wake values using this function.
+ */
+static void __tcs_set_trigger(struct rsc_drv *drv, int tcs_id, bool trigger)
+{
+	u32 enable;
+
+	/*
+	 * HW req: Clear the DRV_CONTROL and enable TCS again
+	 * While clearing ensure that the AMC mode trigger is cleared
+	 * and then the mode enable is cleared.
+	 */
+	enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id);
+	enable &= ~TCS_AMC_MODE_TRIGGER;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	enable &= ~TCS_AMC_MODE_ENABLE;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+
+	if (trigger) {
+		/* Enable the AMC mode on the TCS and then trigger the TCS */
+		enable = TCS_AMC_MODE_ENABLE;
+		write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+		enable |= TCS_AMC_MODE_TRIGGER;
+		write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	}
+}
+
+/**
+ * enable_tcs_irq() - Enable or disable interrupts on the given TCS.
+ * @drv:     The controller.
+ * @tcs_id:  The global ID of this TCS.
+ * @enable:  If true then enable; if false then disable
+ *
+ * We only ever call this when we borrow a wake TCS for an active-only
+ * transfer. For active-only TCSes interrupts are always left enabled.
+ */
+static void enable_tcs_irq(struct rsc_drv *drv, int tcs_id, bool enable)
+{
+	u32 data;
+
+	data = readl_relaxed(drv->tcs_base + RSC_DRV_IRQ_ENABLE);
+	if (enable)
+		data |= BIT(tcs_id);
+	else
+		data &= ~BIT(tcs_id);
+	writel_relaxed(data, drv->tcs_base + RSC_DRV_IRQ_ENABLE);
+}
+
+/**
+ * tcs_tx_done() - TX Done interrupt handler.
+ * @irq: The IRQ number (ignored).
+ * @p:   Pointer to "struct rsc_drv".
+ *
+ * Called for ACTIVE_ONLY transfers (those are the only ones we enable the
+ * IRQ for) when a transfer is done.
+ *
+ * Return: IRQ_HANDLED
  */
 static irqreturn_t tcs_tx_done(int irq, void *p)
 {
@@ -212,7 +390,7 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 	const struct tcs_request *req;
 	struct tcs_cmd *cmd;
 
-	irq_status = read_tcs_reg(drv, RSC_DRV_IRQ_STATUS, 0, 0);
+	irq_status = readl_relaxed(drv->tcs_base + RSC_DRV_IRQ_STATUS);
 
 	for_each_set_bit(i, &irq_status, BITS_PER_LONG) {
 		req = get_req_from_tcs(drv, i);
@@ -226,7 +404,7 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 			u32 sts;
 
 			cmd = &req->cmds[j];
-			sts = read_tcs_reg(drv, RSC_DRV_CMD_STATUS, i, j);
+			sts = read_tcs_cmd(drv, RSC_DRV_CMD_STATUS, i, j);
 			if (!(sts & CMD_STATUS_ISSUED) ||
 			   ((req->wait_for_compl || cmd->wait) &&
 			   !(sts & CMD_STATUS_COMPL))) {
@@ -237,13 +415,28 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 		}
 
 		trace_rpmh_tx_done(drv, i, req, err);
+
+		/*
+		 * If wake tcs was re-purposed for sending active
+		 * votes, clear AMC trigger & enable modes and
+		 * disable interrupt for this TCS
+		 */
+		if (!drv->tcs[ACTIVE_TCS].num_tcs)
+			__tcs_set_trigger(drv, i, false);
 skip:
 		/* Reclaim the TCS */
 		write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
 		write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, i, 0);
-		write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, BIT(i));
+		writel_relaxed(BIT(i), drv->tcs_base + RSC_DRV_IRQ_CLEAR);
 		spin_lock(&drv->lock);
 		clear_bit(i, drv->tcs_in_use);
+		/*
+		 * Disable interrupt for WAKE TCS to avoid being
+		 * spammed with interrupts coming when the solver
+		 * sends its wake votes.
+		 */
+		if (!drv->tcs[ACTIVE_TCS].num_tcs)
+			enable_tcs_irq(drv, i, false);
 		spin_unlock(&drv->lock);
 		if (req)
 			rpmh_tx_done(req, err);
@@ -252,6 +445,16 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 	return IRQ_HANDLED;
 }
 
+/**
+ * __tcs_buffer_write() - Write to TCS hardware from a request; don't trigger.
+ * @drv:    The controller.
+ * @tcs_id: The global ID of this TCS.
+ * @cmd_id: The index within the TCS to start writing.
+ * @msg:    The message we want to send, which will contain several addr/data
+ *          pairs to program (but few enough that they all fit in one TCS).
+ *
+ * This is used for all types of transfers (active, sleep, and wake).
+ */
 static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
 			       const struct tcs_request *msg)
 {
@@ -265,7 +468,7 @@ static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
 	cmd_msgid |= msg->wait_for_compl ? CMD_MSGID_RESP_REQ : 0;
 	cmd_msgid |= CMD_MSGID_WRITE;
 
-	cmd_complete = read_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id, 0);
+	cmd_complete = read_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id);
 
 	for (i = 0, j = cmd_id; i < msg->num_cmds; i++, j++) {
 		cmd = &msg->cmds[i];
@@ -281,32 +484,30 @@ static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
 	}
 
 	write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id, cmd_complete);
-	cmd_enable |= read_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, 0);
+	cmd_enable |= read_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id);
 	write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, cmd_enable);
 }
 
-static void __tcs_trigger(struct rsc_drv *drv, int tcs_id)
-{
-	u32 enable;
-
-	/*
-	 * HW req: Clear the DRV_CONTROL and enable TCS again
-	 * While clearing ensure that the AMC mode trigger is cleared
-	 * and then the mode enable is cleared.
-	 */
-	enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
-	enable &= ~TCS_AMC_MODE_TRIGGER;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-	enable &= ~TCS_AMC_MODE_ENABLE;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-
-	/* Enable the AMC mode on the TCS and then trigger the TCS */
-	enable = TCS_AMC_MODE_ENABLE;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-	enable |= TCS_AMC_MODE_TRIGGER;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-}
-
+/**
+ * check_for_req_inflight() - Look to see if conflicting cmds are in flight.
+ * @drv: The controller.
+ * @tcs: A pointer to the tcs_group used for ACTIVE_ONLY transfers.
+ * @msg: The message we want to send, which will contain several addr/data
+ *       pairs to program (but few enough that they all fit in one TCS).
+ *
+ * This will walk through the TCSes in the group and check if any of them
+ * appear to be sending to addresses referenced in the message. If it finds
+ * one it'll return -EBUSY.
+ *
+ * Only for use for active-only transfers.
+ *
+ * Must be called with the drv->lock held since that protects tcs_in_use.
+ *
+ * Return: 0 if nothing in flight or -EBUSY if we should try again later.
+ *         The caller must re-enable interrupts between tries since that's
+ *         the only way tcs_is_free() will ever return true and the only way
+ *         RSC_DRV_CMD_ENABLE will ever be cleared.
+ */
 static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
 				  const struct tcs_request *msg)
 {
@@ -319,10 +520,10 @@ static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
 		if (tcs_is_free(drv, tcs_id))
 			continue;
 
-		curr_enabled = read_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, 0);
+		curr_enabled = read_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id);
 
 		for_each_set_bit(j, &curr_enabled, MAX_CMDS_PER_TCS) {
-			addr = read_tcs_reg(drv, RSC_DRV_CMD_ADDR, tcs_id, j);
+			addr = read_tcs_cmd(drv, RSC_DRV_CMD_ADDR, tcs_id, j);
 			for (k = 0; k < msg->num_cmds; k++) {
 				if (addr == msg->cmds[k].addr)
 					return -EBUSY;
@@ -333,6 +534,15 @@ static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
 	return 0;
 }
 
+/**
+ * find_free_tcs() - Find free tcs in the given tcs_group; only for active.
+ * @tcs: A pointer to the active-only tcs_group (or the wake tcs_group if
+ *       we borrowed it because there are zero active-only ones).
+ *
+ * Must be called with the drv->lock held since that protects tcs_in_use.
+ *
+ * Return: The first tcs that's free.
+ */
 static int find_free_tcs(struct tcs_group *tcs)
 {
 	int i;
@@ -345,6 +555,20 @@ static int find_free_tcs(struct tcs_group *tcs)
 	return -EBUSY;
 }
 
+/**
+ * tcs_write() - Store messages into a TCS right now, or return -EBUSY.
+ * @drv: The controller.
+ * @msg: The data to be sent.
+ *
+ * Grabs a TCS for ACTIVE_ONLY transfers and writes the messages to it.
+ *
+ * If there are no free TCSes for ACTIVE_ONLY transfers or if a command for
+ * the same address is already transferring returns -EBUSY which means the
+ * client should retry shortly.
+ *
+ * Return: 0 on success, -EBUSY if client should retry, or an error.
+ *         Client should have interrupts enabled for a bit before retrying.
+ */
 static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
 {
 	struct tcs_group *tcs;
@@ -377,10 +601,20 @@ static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
 
 	tcs->req[tcs_id - tcs->offset] = msg;
 	set_bit(tcs_id, drv->tcs_in_use);
+	if (msg->state == RPMH_ACTIVE_ONLY_STATE && tcs->type != ACTIVE_TCS) {
+		/*
+		 * Clear previously programmed WAKE commands in selected
+		 * repurposed TCS to avoid triggering them. tcs->slots will be
+		 * cleaned from rpmh_flush() by invoking rpmh_rsc_invalidate()
+		 */
+		write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, tcs_id, 0);
+		write_tcs_reg_sync(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id, 0);
+		enable_tcs_irq(drv, tcs_id, true);
+	}
 	spin_unlock(&drv->lock);
 
 	__tcs_buffer_write(drv, tcs_id, 0, msg);
-	__tcs_trigger(drv, tcs_id);
+	__tcs_set_trigger(drv, tcs_id, true);
 
 done_write:
 	spin_unlock_irqrestore(&tcs->lock, flags);
@@ -388,25 +622,31 @@ static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
 }
 
 /**
- * rpmh_rsc_send_data: Validate the incoming message and write to the
- * appropriate TCS block.
+ * rpmh_rsc_send_data() - Write / trigger active-only message.
+ * @drv: The controller.
+ * @msg: The data to be sent.
  *
- * @drv: the controller
- * @msg: the data to be sent
+ * NOTES:
+ * - This is only used for "ACTIVE_ONLY" since the limitations of this
+ *   function don't make sense for sleep/wake cases.
+ * - To do the transfer, we will grab a whole TCS for ourselves--we don't
+ *   try to share. If there are none available we'll wait indefinitely
+ *   for a free one.
+ * - This function will not wait for the commands to be finished, only for
+ *   data to be programmed into the RPMh. See rpmh_tx_done() which will
+ *   be called when the transfer is fully complete.
+ * - This function must be called with interrupts enabled. If the hardware
+ *   is busy doing someone else's transfer we need that transfer to fully
+ *   finish so that we can have the hardware, and to fully finish it needs
+ *   the interrupt handler to run. If the interrupts is set to run on the
+ *   active CPU this can never happen if interrupts are disabled.
  *
  * Return: 0 on success, -EINVAL on error.
- * Note: This call blocks until a valid data is written to the TCS.
  */
 int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
 {
 	int ret;
 
-	if (!msg || !msg->cmds || !msg->num_cmds ||
-	    msg->num_cmds > MAX_RPMH_PAYLOAD) {
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
 	do {
 		ret = tcs_write(drv, msg);
 		if (ret == -EBUSY) {
@@ -419,43 +659,30 @@ int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
 	return ret;
 }
 
-static int find_match(const struct tcs_group *tcs, const struct tcs_cmd *cmd,
-		      int len)
-{
-	int i, j;
-
-	/* Check for already cached commands */
-	for_each_set_bit(i, tcs->slots, MAX_TCS_SLOTS) {
-		if (tcs->cmd_cache[i] != cmd[0].addr)
-			continue;
-		if (i + len >= tcs->num_tcs * tcs->ncpt)
-			goto seq_err;
-		for (j = 0; j < len; j++) {
-			if (tcs->cmd_cache[i + j] != cmd[j].addr)
-				goto seq_err;
-		}
-		return i;
-	}
-
-	return -ENODATA;
-
-seq_err:
-	WARN(1, "Message does not match previous sequence.\n");
-	return -EINVAL;
-}
-
+/**
+ * find_slots() - Find a place to write the given message.
+ * @tcs:    The tcs group to search.
+ * @msg:    The message we want to find room for.
+ * @tcs_id: If we return 0 from the function, we return the global ID of the
+ *          TCS to write to here.
+ * @cmd_id: If we return 0 from the function, we return the index of
+ *          the command array of the returned TCS where the client should
+ *          start writing the message.
+ *
+ * Only for use on sleep/wake TCSes since those are the only ones we maintain
+ * tcs->slots for.
+ *
+ * Must be called with the tcs_lock for the group held.
+ *
+ * Return: -ENOMEM if there was no room, else 0.
+ */
 static int find_slots(struct tcs_group *tcs, const struct tcs_request *msg,
 		      int *tcs_id, int *cmd_id)
 {
 	int slot, offset;
 	int i = 0;
 
-	/* Find if we already have the msg in our TCS */
-	slot = find_match(tcs, msg->cmds, msg->num_cmds);
-	if (slot >= 0)
-		goto copy_data;
-
-	/* Do over, until we can fit the full payload in a TCS */
+	/* Do over, until we can fit the full payload in a single TCS */
 	do {
 		slot = bitmap_find_next_zero_area(tcs->slots, MAX_TCS_SLOTS,
 						  i, msg->num_cmds, 0);
@@ -464,11 +691,7 @@ static int find_slots(struct tcs_group *tcs, const struct tcs_request *msg,
 		i += tcs->ncpt;
 	} while (slot + msg->num_cmds - 1 >= i);
 
-copy_data:
 	bitmap_set(tcs->slots, slot, msg->num_cmds);
-	/* Copy the addresses of the resources over to the slots */
-	for (i = 0; i < msg->num_cmds; i++)
-		tcs->cmd_cache[slot + i] = msg->cmds[i].addr;
 
 	offset = slot / tcs->ncpt;
 	*tcs_id = offset + tcs->offset;
@@ -477,7 +700,17 @@ static int find_slots(struct tcs_group *tcs, const struct tcs_request *msg,
 	return 0;
 }
 
-static int tcs_ctrl_write(struct rsc_drv *drv, const struct tcs_request *msg)
+/**
+ * rpmh_rsc_write_ctrl_data() - Write request to controller but don't trigger.
+ * @drv: The controller.
+ * @msg: The data to be written to the controller.
+ *
+ * This should only be called for for sleep/wake state, never active-only
+ * state.
+ *
+ * Return: 0 if no error; else -error.
+ */
+int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg)
 {
 	struct tcs_group *tcs;
 	int tcs_id = 0, cmd_id = 0;
@@ -499,30 +732,100 @@ static int tcs_ctrl_write(struct rsc_drv *drv, const struct tcs_request *msg)
 }
 
 /**
- * rpmh_rsc_write_ctrl_data: Write request to the controller
+ * rpmh_rsc_ctrlr_is_busy() - Check if any of the AMCs are busy.
+ * @drv: The controller
  *
- * @drv: the controller
- * @msg: the data to be written to the controller
+ * Checks if any of the AMCs are busy in handling ACTIVE sets.
+ * This is called from the last cpu powering down before flushing
+ * SLEEP and WAKE sets. If AMCs are busy, controller can not enter
+ * power collapse, so deny from the last cpu's pm notification.
  *
- * There is no response returned for writing the request to the controller.
+ * Return:
+ * * False		- AMCs are idle
+ * * True		- AMCs are busy
  */
-int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg)
+static bool rpmh_rsc_ctrlr_is_busy(struct rsc_drv *drv)
 {
-	if (!msg || !msg->cmds || !msg->num_cmds ||
-	    msg->num_cmds > MAX_RPMH_PAYLOAD) {
-		pr_err("Payload error\n");
-		return -EINVAL;
+	int m;
+	struct tcs_group *tcs = &drv->tcs[ACTIVE_TCS];
+
+	/*
+	 * If we made an active request on a RSC that does not have a
+	 * dedicated TCS for active state use, then re-purposed wake TCSes
+	 * should be checked for not busy, because we used wake TCSes for
+	 * active requests in this case.
+	 *
+	 * Since this is called from the last cpu, need not take drv or tcs
+	 * lock before checking tcs_is_free().
+	 */
+	if (!tcs->num_tcs)
+		tcs = &drv->tcs[WAKE_TCS];
+
+	for (m = tcs->offset; m < tcs->offset + tcs->num_tcs; m++) {
+		if (!tcs_is_free(drv, m))
+			return true;
 	}
 
-	/* Data sent to this API will not be sent immediately */
-	if (msg->state == RPMH_ACTIVE_ONLY_STATE)
-		return -EINVAL;
+	return false;
+}
+
+/**
+ * rpmh_rsc_cpu_pm_callback() - Check if any of the AMCs are busy.
+ * @nfb:    Pointer to the notifier block in struct rsc_drv.
+ * @action: CPU_PM_ENTER, CPU_PM_ENTER_FAILED, or CPU_PM_EXIT.
+ * @v:      Unused
+ *
+ * This function is given to cpu_pm_register_notifier so we can be informed
+ * about when CPUs go down. When all CPUs go down we know no more active
+ * transfers will be started so we write sleep/wake sets. This function gets
+ * called from cpuidle code paths and also at system suspend time.
+ *
+ * If its last CPU going down and AMCs are not busy then writes cached sleep
+ * and wake messages to TCSes. The firmware then takes care of triggering
+ * them when entering deepest low power modes.
+ *
+ * Return: See cpu_pm_register_notifier()
+ */
+static int rpmh_rsc_cpu_pm_callback(struct notifier_block *nfb,
+				    unsigned long action, void *v)
+{
+	struct rsc_drv *drv = container_of(nfb, struct rsc_drv, rsc_pm);
+	int ret = NOTIFY_OK;
+
+	spin_lock(&drv->pm_lock);
 
-	return tcs_ctrl_write(drv, msg);
+	switch (action) {
+	case CPU_PM_ENTER:
+		cpumask_set_cpu(smp_processor_id(), &drv->cpus_entered_pm);
+
+		if (!cpumask_equal(&drv->cpus_entered_pm, cpu_online_mask))
+			goto exit;
+		break;
+	case CPU_PM_ENTER_FAILED:
+	case CPU_PM_EXIT:
+		cpumask_clear_cpu(smp_processor_id(), &drv->cpus_entered_pm);
+		goto exit;
+	}
+
+	ret = rpmh_rsc_ctrlr_is_busy(drv);
+	if (ret) {
+		ret = NOTIFY_BAD;
+		goto exit;
+	}
+
+	ret = rpmh_flush(&drv->client);
+	if (ret)
+		ret = NOTIFY_BAD;
+	else
+		ret = NOTIFY_OK;
+
+exit:
+	spin_unlock(&drv->pm_lock);
+	return ret;
 }
 
 static int rpmh_probe_tcs_config(struct platform_device *pdev,
-				 struct rsc_drv *drv)
+				 struct rsc_drv *drv, void __iomem *base)
 {
 	struct tcs_type_config {
 		u32 type;
@@ -532,15 +835,6 @@ static int rpmh_probe_tcs_config(struct platform_device *pdev,
 	u32 config, max_tcs, ncpt, offset;
 	int i, ret, n, st = 0;
 	struct tcs_group *tcs;
-	struct resource *res;
-	void __iomem *base;
-	char drv_id[10] = {0};
-
-	snprintf(drv_id, ARRAY_SIZE(drv_id), "drv-%d", drv->id);
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, drv_id);
-	base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
 
 	ret = of_property_read_u32(dn, "qcom,tcs-offset", &offset);
 	if (ret)
@@ -596,19 +890,6 @@ static int rpmh_probe_tcs_config(struct platform_device *pdev,
 		tcs->mask = ((1 << tcs->num_tcs) - 1) << st;
 		tcs->offset = st;
 		st += tcs->num_tcs;
-
-		/*
-		 * Allocate memory to cache sleep and wake requests to
-		 * avoid reading TCS register memory.
-		 */
-		if (tcs->type == ACTIVE_TCS)
-			continue;
-
-		tcs->cmd_cache = devm_kcalloc(&pdev->dev,
-					      tcs->num_tcs * ncpt, sizeof(u32),
-					      GFP_KERNEL);
-		if (!tcs->cmd_cache)
-			return -ENOMEM;
 	}
 
 	drv->num_tcs = st;
@@ -620,7 +901,11 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
 {
 	struct device_node *dn = pdev->dev.of_node;
 	struct rsc_drv *drv;
+	struct resource *res;
+	char drv_id[10] = {0};
 	int ret, irq;
+	u32 solver_config;
+	void __iomem *base;
 
 	/*
 	 * Even though RPMh doesn't directly use cmd-db, all of its children
@@ -646,7 +931,13 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
 	if (!drv->name)
 		drv->name = dev_name(&pdev->dev);
 
-	ret = rpmh_probe_tcs_config(pdev, drv);
+	snprintf(drv_id, ARRAY_SIZE(drv_id), "drv-%d", drv->id);
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, drv_id);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	ret = rpmh_probe_tcs_config(pdev, drv, base);
 	if (ret)
 		return ret;
 
@@ -663,8 +954,23 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	/*
+	 * CPU PM notification are not required for controllers that support
+	 * 'HW solver' mode where they can be in autonomous mode executing low
+	 * power mode to power down.
+	 */
+	solver_config = readl_relaxed(base + DRV_SOLVER_CONFIG);
+	solver_config &= DRV_HW_SOLVER_MASK << DRV_HW_SOLVER_SHIFT;
+	solver_config = solver_config >> DRV_HW_SOLVER_SHIFT;
+	if (!solver_config) {
+		drv->rsc_pm.notifier_call = rpmh_rsc_cpu_pm_callback;
+		spin_lock_init(&drv->pm_lock);
+		cpu_pm_register_notifier(&drv->rsc_pm);
+	}
+
 	/* Enable the active TCS to send requests immediately */
-	write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, drv->tcs[ACTIVE_TCS].mask);
+	writel_relaxed(drv->tcs[ACTIVE_TCS].mask,
+		       drv->tcs_base + RSC_DRV_IRQ_ENABLE);
 
 	spin_lock_init(&drv->client.cache_lock);
 	INIT_LIST_HEAD(&drv->client.cache);
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index eb0ded059d2e..d1626a1328d7 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -9,6 +9,7 @@
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/lockdep.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -119,6 +120,7 @@ static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
 {
 	struct cache_req *req;
 	unsigned long flags;
+	u32 old_sleep_val, old_wake_val;
 
 	spin_lock_irqsave(&ctrlr->cache_lock, flags);
 	req = __find_req(ctrlr, cmd->addr);
@@ -133,26 +135,27 @@ static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
 
 	req->addr = cmd->addr;
 	req->sleep_val = req->wake_val = UINT_MAX;
-	INIT_LIST_HEAD(&req->list);
 	list_add_tail(&req->list, &ctrlr->cache);
 
 existing:
+	old_sleep_val = req->sleep_val;
+	old_wake_val = req->wake_val;
+
 	switch (state) {
 	case RPMH_ACTIVE_ONLY_STATE:
-		if (req->sleep_val != UINT_MAX)
-			req->wake_val = cmd->data;
-		break;
 	case RPMH_WAKE_ONLY_STATE:
 		req->wake_val = cmd->data;
 		break;
 	case RPMH_SLEEP_STATE:
 		req->sleep_val = cmd->data;
 		break;
-	default:
-		break;
 	}
 
-	ctrlr->dirty = true;
+	ctrlr->dirty |= (req->sleep_val != old_sleep_val ||
+			 req->wake_val != old_wake_val) &&
+			 req->sleep_val != UINT_MAX &&
+			 req->wake_val != UINT_MAX;
+
 unlock:
 	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 
@@ -287,6 +290,7 @@ static void cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req)
 
 	spin_lock_irqsave(&ctrlr->cache_lock, flags);
 	list_add_tail(&req->list, &ctrlr->batch_cache);
+	ctrlr->dirty = true;
 	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 }
 
@@ -294,12 +298,10 @@ static int flush_batch(struct rpmh_ctrlr *ctrlr)
 {
 	struct batch_cache_req *req;
 	const struct rpmh_request *rpm_msg;
-	unsigned long flags;
 	int ret = 0;
 	int i;
 
 	/* Send Sleep/Wake requests to the controller, expect no response */
-	spin_lock_irqsave(&ctrlr->cache_lock, flags);
 	list_for_each_entry(req, &ctrlr->batch_cache, list) {
 		for (i = 0; i < req->count; i++) {
 			rpm_msg = req->rpm_msgs + i;
@@ -309,23 +311,10 @@ static int flush_batch(struct rpmh_ctrlr *ctrlr)
 				break;
 		}
 	}
-	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 
 	return ret;
 }
 
-static void invalidate_batch(struct rpmh_ctrlr *ctrlr)
-{
-	struct batch_cache_req *req, *tmp;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctrlr->cache_lock, flags);
-	list_for_each_entry_safe(req, tmp, &ctrlr->batch_cache, list)
-		kfree(req);
-	INIT_LIST_HEAD(&ctrlr->batch_cache);
-	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
-}
-
 /**
  * rpmh_write_batch: Write multiple sets of RPMH commands and wait for the
  * batch to finish.
@@ -442,36 +431,37 @@ static int send_single(struct rpmh_ctrlr *ctrlr, enum rpmh_state state,
 }
 
 /**
- * rpmh_flush: Flushes the buffered active and sleep sets to TCS
+ * rpmh_flush() - Flushes the buffered sleep and wake sets to TCSes
  *
- * @ctrlr: controller making request to flush cached data
+ * @ctrlr: Controller making request to flush cached data
  *
- * Return: -EBUSY if the controller is busy, probably waiting on a response
- * to a RPMH request sent earlier.
+ * This function is called from sleep code on the last CPU
+ * (thus no spinlock needed).
  *
- * This function is always called from the sleep code from the last CPU
- * that is powering down the entire system. Since no other RPMH API would be
- * executing at this time, it is safe to run lockless.
+ * Return:
+ * * 0          - Success
+ * * Error code - Otherwise
  */
 int rpmh_flush(struct rpmh_ctrlr *ctrlr)
 {
 	struct cache_req *p;
 	int ret;
 
+	lockdep_assert_irqs_disabled();
+
 	if (!ctrlr->dirty) {
 		pr_debug("Skipping flush, TCS has latest data.\n");
 		return 0;
 	}
 
+	/* Invalidate the TCSes first to avoid stale data */
+	rpmh_rsc_invalidate(ctrlr_to_drv(ctrlr));
+
 	/* First flush the cached batch requests */
 	ret = flush_batch(ctrlr);
 	if (ret)
 		return ret;
 
-	/*
-	 * Nobody else should be calling this function other than system PM,
-	 * hence we can run without locks.
-	 */
 	list_for_each_entry(p, &ctrlr->cache, list) {
 		if (!is_req_valid(p)) {
 			pr_debug("%s: skipping RPMH req: a:%#x s:%#x w:%#x",
@@ -494,25 +484,25 @@ int rpmh_flush(struct rpmh_ctrlr *ctrlr)
 }
 
 /**
- * rpmh_invalidate: Invalidate all sleep and active sets
- * sets.
+ * rpmh_invalidate: Invalidate sleep and wake sets in batch_cache
  *
  * @dev: The device making the request
  *
- * Invalidate the sleep and active values in the TCS blocks.
+ * Invalidate the sleep and wake values in batch_cache.
  */
 int rpmh_invalidate(const struct device *dev)
 {
 	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
-	int ret;
+	struct batch_cache_req *req, *tmp;
+	unsigned long flags;
 
-	invalidate_batch(ctrlr);
+	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	list_for_each_entry_safe(req, tmp, &ctrlr->batch_cache, list)
+		kfree(req);
+	INIT_LIST_HEAD(&ctrlr->batch_cache);
 	ctrlr->dirty = true;
+	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 
-	do {
-		ret = rpmh_rsc_invalidate(ctrlr_to_drv(ctrlr));
-	} while (ret == -EAGAIN);
-
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(rpmh_invalidate);
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index 4d264d0672c4..e72426221a69 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -4,6 +4,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/pm_domain.h>
 #include <linux/slab.h>
@@ -166,6 +167,24 @@ static const struct rpmhpd_desc sm8150_desc = {
 	.num_pds = ARRAY_SIZE(sm8150_rpmhpds),
 };
 
+static struct rpmhpd *sm8250_rpmhpds[] = {
+	[SM8250_CX] = &sdm845_cx,
+	[SM8250_CX_AO] = &sdm845_cx_ao,
+	[SM8250_EBI] = &sdm845_ebi,
+	[SM8250_GFX] = &sdm845_gfx,
+	[SM8250_LCX] = &sdm845_lcx,
+	[SM8250_LMX] = &sdm845_lmx,
+	[SM8250_MMCX] = &sm8150_mmcx,
+	[SM8250_MMCX_AO] = &sm8150_mmcx_ao,
+	[SM8250_MX] = &sdm845_mx,
+	[SM8250_MX_AO] = &sdm845_mx_ao,
+};
+
+static const struct rpmhpd_desc sm8250_desc = {
+	.rpmhpds = sm8250_rpmhpds,
+	.num_pds = ARRAY_SIZE(sm8250_rpmhpds),
+};
+
 /* SC7180 RPMH powerdomains */
 static struct rpmhpd *sc7180_rpmhpds[] = {
 	[SC7180_CX] = &sdm845_cx,
@@ -187,8 +206,10 @@ static const struct of_device_id rpmhpd_match_table[] = {
 	{ .compatible = "qcom,sc7180-rpmhpd", .data = &sc7180_desc },
 	{ .compatible = "qcom,sdm845-rpmhpd", .data = &sdm845_desc },
 	{ .compatible = "qcom,sm8150-rpmhpd", .data = &sm8150_desc },
+	{ .compatible = "qcom,sm8250-rpmhpd", .data = &sm8250_desc },
 	{ }
 };
+MODULE_DEVICE_TABLE(of, rpmhpd_match_table);
 
 static int rpmhpd_send_corner(struct rpmhpd *pd, int state,
 			      unsigned int corner, bool sync)
@@ -460,3 +481,6 @@ static int __init rpmhpd_init(void)
 	return platform_driver_register(&rpmhpd_driver);
 }
 core_initcall(rpmhpd_init);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. RPMh Power Domain Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index 2b1834c5609a..f2168e4259b2 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -4,6 +4,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/pm_domain.h>
 #include <linux/of.h>
@@ -226,6 +227,7 @@ static const struct of_device_id rpmpd_match_table[] = {
 	{ .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc },
 	{ }
 };
+MODULE_DEVICE_TABLE(of, rpmpd_match_table);
 
 static int rpmpd_send_enable(struct rpmpd *pd, bool enable)
 {
@@ -422,3 +424,6 @@ static int __init rpmpd_init(void)
 	return platform_driver_register(&rpmpd_driver);
 }
 core_initcall(rpmpd_init);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. RPM Power Domain Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c
index c7300d54e444..07183d731d74 100644
--- a/drivers/soc/qcom/smp2p.c
+++ b/drivers/soc/qcom/smp2p.c
@@ -474,10 +474,8 @@ static int qcom_smp2p_probe(struct platform_device *pdev)
 		goto report_read_failure;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "unable to acquire smp2p interrupt\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	smp2p->mbox_client.dev = &pdev->dev;
 	smp2p->mbox_client.knows_txdone = true;
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index ebb49aee179b..08a4b8ae1764 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -430,6 +430,8 @@ static int qcom_socinfo_probe(struct platform_device *pdev)
 	qs->attr.family = "Snapdragon";
 	qs->attr.machine = socinfo_machine(&pdev->dev,
 					   le32_to_cpu(info->id));
+	qs->attr.soc_id = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%u",
+					 le32_to_cpu(info->id));
 	qs->attr.revision = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%u.%u",
 					   SOCINFO_MAJOR(le32_to_cpu(info->ver)),
 					   SOCINFO_MINOR(le32_to_cpu(info->ver)));
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 1982c7fb45fa..1eff82c3b934 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -261,6 +261,10 @@ config ARCH_R8A77995
 endif # ARM64
 
 # SoC
+config SYSC_R8A7742
+	bool "RZ/G1H System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A7743
 	bool "RZ/G1M System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index e595c3c3bd10..08296d78e2ad 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_SOC_RENESAS)	+= renesas-soc.o
 
 # SoC
+obj-$(CONFIG_SYSC_R8A7742)	+= r8a7742-sysc.o
 obj-$(CONFIG_SYSC_R8A7743)	+= r8a7743-sysc.o
 obj-$(CONFIG_SYSC_R8A7745)	+= r8a7745-sysc.o
 obj-$(CONFIG_SYSC_R8A77470)	+= r8a77470-sysc.o
diff --git a/drivers/soc/renesas/r8a7742-sysc.c b/drivers/soc/renesas/r8a7742-sysc.c
new file mode 100644
index 000000000000..219a675f83f4
--- /dev/null
+++ b/drivers/soc/renesas/r8a7742-sysc.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G1H System Controller
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a7742-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a7742_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A7742_PD_ALWAYS_ON,	-1, PD_ALWAYS_ON },
+	{ "ca15-scu",	0x180, 0, R8A7742_PD_CA15_SCU,	R8A7742_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca15-cpu0",	 0x40, 0, R8A7742_PD_CA15_CPU0,	R8A7742_PD_CA15_SCU,
+	  PD_CPU_NOCR },
+	{ "ca15-cpu1",	 0x40, 1, R8A7742_PD_CA15_CPU1,	R8A7742_PD_CA15_SCU,
+	  PD_CPU_NOCR },
+	{ "ca15-cpu2",	 0x40, 2, R8A7742_PD_CA15_CPU2,	R8A7742_PD_CA15_SCU,
+	  PD_CPU_NOCR },
+	{ "ca15-cpu3",	 0x40, 3, R8A7742_PD_CA15_CPU3,	R8A7742_PD_CA15_SCU,
+	  PD_CPU_NOCR },
+	{ "ca7-scu",	0x100, 0, R8A7742_PD_CA7_SCU,	R8A7742_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca7-cpu0",	0x1c0, 0, R8A7742_PD_CA7_CPU0,	R8A7742_PD_CA7_SCU,
+	  PD_CPU_NOCR },
+	{ "ca7-cpu1",	0x1c0, 1, R8A7742_PD_CA7_CPU1,	R8A7742_PD_CA7_SCU,
+	  PD_CPU_NOCR },
+	{ "ca7-cpu2",	0x1c0, 2, R8A7742_PD_CA7_CPU2,	R8A7742_PD_CA7_SCU,
+	  PD_CPU_NOCR },
+	{ "ca7-cpu3",	0x1c0, 3, R8A7742_PD_CA7_CPU3,	R8A7742_PD_CA7_SCU,
+	  PD_CPU_NOCR },
+	{ "rgx",	 0xc0, 0, R8A7742_PD_RGX,	R8A7742_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a7742_sysc_info __initconst = {
+	.areas = r8a7742_areas,
+	.num_areas = ARRAY_SIZE(r8a7742_areas),
+};
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index 2af2e0dd83fe..a2b2b1768768 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -39,6 +39,7 @@ static const struct rst_config rcar_rst_gen3 __initconst = {
 
 static const struct of_device_id rcar_rst_matches[] __initconst = {
 	/* RZ/G1 is handled like R-Car Gen2 */
+	{ .compatible = "renesas,r8a7742-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7743-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7744-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7745-rst", .data = &rcar_rst_gen2 },
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index f0b291e02b8a..04ea87a188f1 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -273,6 +273,9 @@ static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
 }
 
 static const struct of_device_id rcar_sysc_matches[] __initconst = {
+#ifdef CONFIG_SYSC_R8A7742
+	{ .compatible = "renesas,r8a7742-sysc", .data = &r8a7742_sysc_info },
+#endif
 #ifdef CONFIG_SYSC_R8A7743
 	{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
 	/* RZ/G1N is identical to RZ/G2M w.r.t. power domains. */
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 0fc3b119930a..e417f26fe155 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -49,6 +49,7 @@ struct rcar_sysc_info {
 	u32 extmask_val;	/* SYSCEXTMASK register mask value */
 };
 
+extern const struct rcar_sysc_info r8a7742_sysc_info;
 extern const struct rcar_sysc_info r8a7743_sysc_info;
 extern const struct rcar_sysc_info r8a7745_sysc_info;
 extern const struct rcar_sysc_info r8a77470_sysc_info;
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index 802717b9f6a3..d1f8dd0289e6 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -300,6 +300,59 @@ static void tegra_enable_fuse_clk(void __iomem *base)
 	writel(reg, base + 0x14);
 }
 
+static ssize_t major_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	return sprintf(buf, "%d\n", tegra_get_major_rev());
+}
+
+static DEVICE_ATTR_RO(major);
+
+static ssize_t minor_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	return sprintf(buf, "%d\n", tegra_get_minor_rev());
+}
+
+static DEVICE_ATTR_RO(minor);
+
+static struct attribute *tegra_soc_attr[] = {
+	&dev_attr_major.attr,
+	&dev_attr_minor.attr,
+	NULL,
+};
+
+const struct attribute_group tegra_soc_attr_group = {
+	.attrs = tegra_soc_attr,
+};
+
+#ifdef CONFIG_ARCH_TEGRA_194_SOC
+static ssize_t platform_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	/*
+	 * Displays the value in the 'pre_si_platform' field of the HIDREV
+	 * register for Tegra194 devices. A value of 0 indicates that the
+	 * platform type is silicon and all other non-zero values indicate
+	 * the type of simulation platform is being used.
+	 */
+	return sprintf(buf, "%d\n", (tegra_read_chipid() >> 20) & 0xf);
+}
+
+static DEVICE_ATTR_RO(platform);
+
+static struct attribute *tegra194_soc_attr[] = {
+	&dev_attr_major.attr,
+	&dev_attr_minor.attr,
+	&dev_attr_platform.attr,
+	NULL,
+};
+
+const struct attribute_group tegra194_soc_attr_group = {
+	.attrs = tegra194_soc_attr,
+};
+#endif
+
 struct device * __init tegra_soc_device_register(void)
 {
 	struct soc_device_attribute *attr;
@@ -310,8 +363,10 @@ struct device * __init tegra_soc_device_register(void)
 		return NULL;
 
 	attr->family = kasprintf(GFP_KERNEL, "Tegra");
-	attr->revision = kasprintf(GFP_KERNEL, "%d", tegra_sku_info.revision);
+	attr->revision = kasprintf(GFP_KERNEL, "%s",
+		tegra_revision_name[tegra_sku_info.revision]);
 	attr->soc_id = kasprintf(GFP_KERNEL, "%u", tegra_get_chip_id());
+	attr->custom_attr_group = fuse->soc->soc_attr_group;
 
 	dev = soc_device_register(attr);
 	if (IS_ERR(dev)) {
diff --git a/drivers/soc/tegra/fuse/fuse-tegra20.c b/drivers/soc/tegra/fuse/fuse-tegra20.c
index d4aef9c4a94c..16aaa28573ac 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra20.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra20.c
@@ -164,4 +164,5 @@ const struct tegra_fuse_soc tegra20_fuse_soc = {
 	.speedo_init = tegra20_init_speedo_data,
 	.probe = tegra20_fuse_probe,
 	.info = &tegra20_fuse_info,
+	.soc_attr_group = &tegra_soc_attr_group,
 };
diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index e6037f900fb7..85accef41fa1 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -111,6 +111,7 @@ const struct tegra_fuse_soc tegra30_fuse_soc = {
 	.init = tegra30_fuse_init,
 	.speedo_init = tegra30_init_speedo_data,
 	.info = &tegra30_fuse_info,
+	.soc_attr_group = &tegra_soc_attr_group,
 };
 #endif
 
@@ -125,6 +126,7 @@ const struct tegra_fuse_soc tegra114_fuse_soc = {
 	.init = tegra30_fuse_init,
 	.speedo_init = tegra114_init_speedo_data,
 	.info = &tegra114_fuse_info,
+	.soc_attr_group = &tegra_soc_attr_group,
 };
 #endif
 
@@ -205,6 +207,7 @@ const struct tegra_fuse_soc tegra124_fuse_soc = {
 	.info = &tegra124_fuse_info,
 	.lookups = tegra124_fuse_lookups,
 	.num_lookups = ARRAY_SIZE(tegra124_fuse_lookups),
+	.soc_attr_group = &tegra_soc_attr_group,
 };
 #endif
 
@@ -290,6 +293,7 @@ const struct tegra_fuse_soc tegra210_fuse_soc = {
 	.info = &tegra210_fuse_info,
 	.lookups = tegra210_fuse_lookups,
 	.num_lookups = ARRAY_SIZE(tegra210_fuse_lookups),
+	.soc_attr_group = &tegra_soc_attr_group,
 };
 #endif
 
@@ -319,6 +323,7 @@ const struct tegra_fuse_soc tegra186_fuse_soc = {
 	.info = &tegra186_fuse_info,
 	.lookups = tegra186_fuse_lookups,
 	.num_lookups = ARRAY_SIZE(tegra186_fuse_lookups),
+	.soc_attr_group = &tegra_soc_attr_group,
 };
 #endif
 
@@ -348,5 +353,6 @@ const struct tegra_fuse_soc tegra194_fuse_soc = {
 	.info = &tegra194_fuse_info,
 	.lookups = tegra194_fuse_lookups,
 	.num_lookups = ARRAY_SIZE(tegra194_fuse_lookups),
+	.soc_attr_group = &tegra194_soc_attr_group,
 };
 #endif
diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h
index 94a059e577a1..9d4fc315a007 100644
--- a/drivers/soc/tegra/fuse/fuse.h
+++ b/drivers/soc/tegra/fuse/fuse.h
@@ -32,6 +32,8 @@ struct tegra_fuse_soc {
 
 	const struct nvmem_cell_lookup *lookups;
 	unsigned int num_lookups;
+
+	const struct attribute_group *soc_attr_group;
 };
 
 struct tegra_fuse {
@@ -64,6 +66,11 @@ void tegra_init_apbmisc(void);
 bool __init tegra_fuse_read_spare(unsigned int spare);
 u32 __init tegra_fuse_read_early(unsigned int offset);
 
+u8 tegra_get_major_rev(void);
+u8 tegra_get_minor_rev(void);
+
+extern const struct attribute_group tegra_soc_attr_group;
+
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 void tegra20_init_speedo_data(struct tegra_sku_info *sku_info);
 #endif
@@ -110,6 +117,7 @@ extern const struct tegra_fuse_soc tegra186_fuse_soc;
 
 #ifdef CONFIG_ARCH_TEGRA_194_SOC
 extern const struct tegra_fuse_soc tegra194_fuse_soc;
+extern const struct attribute_group tegra194_soc_attr_group;
 #endif
 
 #endif
diff --git a/drivers/soc/tegra/fuse/tegra-apbmisc.c b/drivers/soc/tegra/fuse/tegra-apbmisc.c
index 089d9340564b..3cdd69d1bd4d 100644
--- a/drivers/soc/tegra/fuse/tegra-apbmisc.c
+++ b/drivers/soc/tegra/fuse/tegra-apbmisc.c
@@ -37,6 +37,16 @@ u8 tegra_get_chip_id(void)
 	return (tegra_read_chipid() >> 8) & 0xff;
 }
 
+u8 tegra_get_major_rev(void)
+{
+	return (tegra_read_chipid() >> 4) & 0xf;
+}
+
+u8 tegra_get_minor_rev(void)
+{
+	return (tegra_read_chipid() >> 16) & 0xf;
+}
+
 u32 tegra_read_straps(void)
 {
 	WARN(!chipid, "Tegra ABP MISC not yet available\n");
@@ -65,36 +75,32 @@ static const struct of_device_id apbmisc_match[] __initconst = {
 
 void __init tegra_init_revision(void)
 {
-	u32 id, chip_id, minor_rev;
-	int rev;
+	u8 chip_id, minor_rev;
 
-	id = tegra_read_chipid();
-	chip_id = (id >> 8) & 0xff;
-	minor_rev = (id >> 16) & 0xf;
+	chip_id = tegra_get_chip_id();
+	minor_rev = tegra_get_minor_rev();
 
 	switch (minor_rev) {
 	case 1:
-		rev = TEGRA_REVISION_A01;
+		tegra_sku_info.revision = TEGRA_REVISION_A01;
 		break;
 	case 2:
-		rev = TEGRA_REVISION_A02;
+		tegra_sku_info.revision = TEGRA_REVISION_A02;
 		break;
 	case 3:
 		if (chip_id == TEGRA20 && (tegra_fuse_read_spare(18) ||
 					   tegra_fuse_read_spare(19)))
-			rev = TEGRA_REVISION_A03p;
+			tegra_sku_info.revision = TEGRA_REVISION_A03p;
 		else
-			rev = TEGRA_REVISION_A03;
+			tegra_sku_info.revision = TEGRA_REVISION_A03;
 		break;
 	case 4:
-		rev = TEGRA_REVISION_A04;
+		tegra_sku_info.revision = TEGRA_REVISION_A04;
 		break;
 	default:
-		rev = TEGRA_REVISION_UNKNOWN;
+		tegra_sku_info.revision = TEGRA_REVISION_UNKNOWN;
 	}
 
-	tegra_sku_info.revision = rev;
-
 	tegra_sku_info.sku_id = tegra_fuse_read_early(FUSE_SKU_INFO);
 }
 
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 1c533a969f54..72cfda7305d5 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -3193,6 +3193,7 @@ static void tegra186_pmc_setup_irq_polarity(struct tegra_pmc *pmc,
 }
 
 static const struct tegra_wake_event tegra186_wake_events[] = {
+	TEGRA_WAKE_IRQ("pmu", 24, 209),
 	TEGRA_WAKE_GPIO("power", 29, 1, TEGRA186_AON_GPIO(FF, 0)),
 	TEGRA_WAKE_IRQ("rtc", 73, 10),
 };
diff --git a/drivers/soc/ti/knav_qmss.h b/drivers/soc/ti/knav_qmss.h
index 038aec352df7..a01eda720bf6 100644
--- a/drivers/soc/ti/knav_qmss.h
+++ b/drivers/soc/ti/knav_qmss.h
@@ -67,7 +67,7 @@ struct knav_reg_config {
 	u32		link_ram_size0;
 	u32		link_ram_base1;
 	u32		__pad2[2];
-	u32		starvation[0];
+	u32		starvation[];
 };
 
 struct knav_reg_region {
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index 3c83e76c6bf9..ed8d576bf5dc 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -669,11 +669,11 @@ static int sdw_stream_setup(struct snd_pcm_substream *substream,
 
 	/* Set stream pointer on all CODEC DAIs */
 	for (i = 0; i < rtd->num_codecs; i++) {
-		ret = snd_soc_dai_set_sdw_stream(rtd->codec_dais[i], sdw_stream,
+		ret = snd_soc_dai_set_sdw_stream(asoc_rtd_to_codec(rtd, i), sdw_stream,
 						 substream->stream);
 		if (ret < 0) {
 			dev_err(dai->dev, "failed to set stream pointer on codec dai %s",
-				rtd->codec_dais[i]->name);
+				asoc_rtd_to_codec(rtd, i)->name);
 			goto release_stream;
 		}
 	}
diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c
index 4b769409f6f8..ad7053463889 100644
--- a/drivers/soundwire/intel_init.c
+++ b/drivers/soundwire/intel_init.c
@@ -190,7 +190,8 @@ static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level,
  * This scans the namespace and creates SoundWire link controller devices
  * based on the info queried.
  */
-void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res)
+static void *sdw_intel_init(acpi_handle *parent_handle,
+			    struct sdw_intel_res *res)
 {
 	acpi_status status;
 
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 741b9140992a..17e7e4afc0fc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -910,6 +910,12 @@ config SPI_ZYNQMP_GQSPI
 	help
 	  Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
 
+config SPI_AMD
+	tristate "AMD SPI controller"
+	depends on SPI_MASTER || COMPILE_TEST
+	help
+	  Enables SPI controller driver for AMD SoC.
+
 #
 # Add new SPI master controllers in alphabetical order above this line
 #
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 28f601327f8c..889368f4ad53 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -127,6 +127,7 @@ obj-$(CONFIG_SPI_XLP)			+= spi-xlp.o
 obj-$(CONFIG_SPI_XTENSA_XTFPGA)		+= spi-xtensa-xtfpga.o
 obj-$(CONFIG_SPI_ZYNQ_QSPI)		+= spi-zynq-qspi.o
 obj-$(CONFIG_SPI_ZYNQMP_GQSPI)		+= spi-zynqmp-gqspi.o
+obj-$(CONFIG_SPI_AMD)			+= spi-amd.o
 
 # SPI slave protocol handlers
 obj-$(CONFIG_SPI_SLAVE_TIME)		+= spi-slave-time.o
diff --git a/drivers/spi/spi-amd.c b/drivers/spi/spi-amd.c
new file mode 100644
index 000000000000..c7cfc3dc20b1
--- /dev/null
+++ b/drivers/spi/spi-amd.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+//
+// AMD SPI controller driver
+//
+// Copyright (c) 2020, Advanced Micro Devices, Inc.
+//
+// Author: Sanjay R Mehta <sanju.mehta@amd.com>
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+
+#define AMD_SPI_CTRL0_REG	0x00
+#define AMD_SPI_EXEC_CMD	BIT(16)
+#define AMD_SPI_FIFO_CLEAR	BIT(20)
+#define AMD_SPI_BUSY		BIT(31)
+
+#define AMD_SPI_OPCODE_MASK	0xFF
+
+#define AMD_SPI_ALT_CS_REG	0x1D
+#define AMD_SPI_ALT_CS_MASK	0x3
+
+#define AMD_SPI_FIFO_BASE	0x80
+#define AMD_SPI_TX_COUNT_REG	0x48
+#define AMD_SPI_RX_COUNT_REG	0x4B
+#define AMD_SPI_STATUS_REG	0x4C
+
+#define AMD_SPI_MEM_SIZE	200
+
+/* M_CMD OP codes for SPI */
+#define AMD_SPI_XFER_TX		1
+#define AMD_SPI_XFER_RX		2
+
+struct amd_spi {
+	void __iomem *io_remap_addr;
+	unsigned long io_base_addr;
+	u32 rom_addr;
+	struct spi_master *master;
+	u8 chip_select;
+};
+
+static inline u8 amd_spi_readreg8(struct spi_master *master, int idx)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	return ioread8((u8 __iomem *)amd_spi->io_remap_addr + idx);
+}
+
+static inline void amd_spi_writereg8(struct spi_master *master, int idx,
+				     u8 val)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	iowrite8(val, ((u8 __iomem *)amd_spi->io_remap_addr + idx));
+}
+
+static inline void amd_spi_setclear_reg8(struct spi_master *master, int idx,
+					 u8 set, u8 clear)
+{
+	u8 tmp = amd_spi_readreg8(master, idx);
+
+	tmp = (tmp & ~clear) | set;
+	amd_spi_writereg8(master, idx, tmp);
+}
+
+static inline u32 amd_spi_readreg32(struct spi_master *master, int idx)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	return ioread32((u8 __iomem *)amd_spi->io_remap_addr + idx);
+}
+
+static inline void amd_spi_writereg32(struct spi_master *master, int idx,
+				      u32 val)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	iowrite32(val, ((u8 __iomem *)amd_spi->io_remap_addr + idx));
+}
+
+static inline void amd_spi_setclear_reg32(struct spi_master *master, int idx,
+					  u32 set, u32 clear)
+{
+	u32 tmp = amd_spi_readreg32(master, idx);
+
+	tmp = (tmp & ~clear) | set;
+	amd_spi_writereg32(master, idx, tmp);
+}
+
+static void amd_spi_select_chip(struct spi_master *master)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+	u8 chip_select = amd_spi->chip_select;
+
+	amd_spi_setclear_reg8(master, AMD_SPI_ALT_CS_REG, chip_select,
+			      AMD_SPI_ALT_CS_MASK);
+}
+
+static void amd_spi_clear_fifo_ptr(struct spi_master *master)
+{
+	amd_spi_setclear_reg32(master, AMD_SPI_CTRL0_REG, AMD_SPI_FIFO_CLEAR,
+			       AMD_SPI_FIFO_CLEAR);
+}
+
+static void amd_spi_set_opcode(struct spi_master *master, u8 cmd_opcode)
+{
+	amd_spi_setclear_reg32(master, AMD_SPI_CTRL0_REG, cmd_opcode,
+			       AMD_SPI_OPCODE_MASK);
+}
+
+static inline void amd_spi_set_rx_count(struct spi_master *master,
+					u8 rx_count)
+{
+	amd_spi_setclear_reg8(master, AMD_SPI_RX_COUNT_REG, rx_count, 0xff);
+}
+
+static inline void amd_spi_set_tx_count(struct spi_master *master,
+					u8 tx_count)
+{
+	amd_spi_setclear_reg8(master, AMD_SPI_TX_COUNT_REG, tx_count, 0xff);
+}
+
+static inline int amd_spi_busy_wait(struct amd_spi *amd_spi)
+{
+	bool spi_busy;
+	int timeout = 100000;
+
+	/* poll for SPI bus to become idle */
+	spi_busy = (ioread32((u8 __iomem *)amd_spi->io_remap_addr +
+		    AMD_SPI_CTRL0_REG) & AMD_SPI_BUSY) == AMD_SPI_BUSY;
+	while (spi_busy) {
+		usleep_range(10, 20);
+		if (timeout-- < 0)
+			return -ETIMEDOUT;
+
+		spi_busy = (ioread32((u8 __iomem *)amd_spi->io_remap_addr +
+			    AMD_SPI_CTRL0_REG) & AMD_SPI_BUSY) == AMD_SPI_BUSY;
+	}
+
+	return 0;
+}
+
+static void amd_spi_execute_opcode(struct spi_master *master)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	/* Set ExecuteOpCode bit in the CTRL0 register */
+	amd_spi_setclear_reg32(master, AMD_SPI_CTRL0_REG, AMD_SPI_EXEC_CMD,
+			       AMD_SPI_EXEC_CMD);
+
+	amd_spi_busy_wait(amd_spi);
+}
+
+static int amd_spi_master_setup(struct spi_device *spi)
+{
+	struct spi_master *master = spi->master;
+
+	amd_spi_clear_fifo_ptr(master);
+
+	return 0;
+}
+
+static inline int amd_spi_fifo_xfer(struct amd_spi *amd_spi,
+				    struct spi_message *message)
+{
+	struct spi_master *master = amd_spi->master;
+	struct spi_transfer *xfer = NULL;
+	u8 cmd_opcode;
+	u8 *buf = NULL;
+	u32 m_cmd = 0;
+	u32 i = 0;
+	u32 tx_len = 0, rx_len = 0;
+
+	list_for_each_entry(xfer, &message->transfers,
+			    transfer_list) {
+		if (xfer->rx_buf)
+			m_cmd = AMD_SPI_XFER_RX;
+		if (xfer->tx_buf)
+			m_cmd = AMD_SPI_XFER_TX;
+
+		if (m_cmd & AMD_SPI_XFER_TX) {
+			buf = (u8 *)xfer->tx_buf;
+			tx_len = xfer->len - 1;
+			cmd_opcode = *(u8 *)xfer->tx_buf;
+			buf++;
+			amd_spi_set_opcode(master, cmd_opcode);
+
+			/* Write data into the FIFO. */
+			for (i = 0; i < tx_len; i++) {
+				iowrite8(buf[i],
+					 ((u8 __iomem *)amd_spi->io_remap_addr +
+					 AMD_SPI_FIFO_BASE + i));
+			}
+
+			amd_spi_set_tx_count(master, tx_len);
+			amd_spi_clear_fifo_ptr(master);
+			/* Execute command */
+			amd_spi_execute_opcode(master);
+		}
+		if (m_cmd & AMD_SPI_XFER_RX) {
+			/*
+			 * Store no. of bytes to be received from
+			 * FIFO
+			 */
+			rx_len = xfer->len;
+			buf = (u8 *)xfer->rx_buf;
+			amd_spi_set_rx_count(master, rx_len);
+			amd_spi_clear_fifo_ptr(master);
+			/* Execute command */
+			amd_spi_execute_opcode(master);
+			/* Read data from FIFO to receive buffer  */
+			for (i = 0; i < rx_len; i++)
+				buf[i] = amd_spi_readreg8(master,
+							  AMD_SPI_FIFO_BASE +
+							  tx_len + i);
+		}
+	}
+
+	/* Update statistics */
+	message->actual_length = tx_len + rx_len + 1;
+	/* complete the transaction */
+	message->status = 0;
+	spi_finalize_current_message(master);
+
+	return 0;
+}
+
+static int amd_spi_master_transfer(struct spi_master *master,
+				   struct spi_message *msg)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+	struct spi_device *spi = msg->spi;
+
+	amd_spi->chip_select = spi->chip_select;
+	amd_spi_select_chip(master);
+
+	/*
+	 * Extract spi_transfers from the spi message and
+	 * program the controller.
+	 */
+	amd_spi_fifo_xfer(amd_spi, msg);
+
+	return 0;
+}
+
+static int amd_spi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct spi_master *master;
+	struct amd_spi *amd_spi;
+	struct resource *res;
+	int err = 0;
+
+	/* Allocate storage for spi_master and driver private data */
+	master = spi_alloc_master(dev, sizeof(struct amd_spi));
+	if (!master) {
+		dev_err(dev, "Error allocating SPI master\n");
+		return -ENOMEM;
+	}
+
+	amd_spi = spi_master_get_devdata(master);
+	amd_spi->master = master;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	amd_spi->io_remap_addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(amd_spi->io_remap_addr)) {
+		err = PTR_ERR(amd_spi->io_remap_addr);
+		dev_err(dev, "error %d ioremap of SPI registers failed\n", err);
+		goto err_free_master;
+	}
+	dev_dbg(dev, "io_remap_address: %p\n", amd_spi->io_remap_addr);
+
+	/* Initialize the spi_master fields */
+	master->bus_num = 0;
+	master->num_chipselect = 4;
+	master->mode_bits = 0;
+	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->setup = amd_spi_master_setup;
+	master->transfer_one_message = amd_spi_master_transfer;
+
+	/* Register the controller with SPI framework */
+	err = spi_register_master(master);
+	if (err) {
+		dev_err(dev, "error %d registering SPI controller\n", err);
+		goto err_iounmap;
+	}
+	platform_set_drvdata(pdev, amd_spi);
+
+	return 0;
+
+err_iounmap:
+	iounmap(amd_spi->io_remap_addr);
+err_free_master:
+	spi_master_put(master);
+
+	return 0;
+}
+
+static int amd_spi_remove(struct platform_device *pdev)
+{
+	struct amd_spi *amd_spi = platform_get_drvdata(pdev);
+
+	spi_unregister_master(amd_spi->master);
+	spi_master_put(amd_spi->master);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct acpi_device_id spi_acpi_match[] = {
+	{ "AMDI0061", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, spi_acpi_match);
+
+static struct platform_driver amd_spi_driver = {
+	.driver = {
+		.name = "amd_spi",
+		.acpi_match_table = ACPI_PTR(spi_acpi_match),
+	},
+	.probe = amd_spi_probe,
+	.remove = amd_spi_remove,
+};
+
+module_platform_driver(amd_spi_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Sanjay Mehta <sanju.mehta@amd.com>");
+MODULE_DESCRIPTION("AMD SPI Master Controller Driver");
diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
index eb9b78a90dcf..af86e6d6e16b 100644
--- a/drivers/spi/spi-axi-spi-engine.c
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -489,22 +489,6 @@ static int spi_engine_probe(struct platform_device *pdev)
 
 	spin_lock_init(&spi_engine->lock);
 
-	spi_engine->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(spi_engine->base)) {
-		ret = PTR_ERR(spi_engine->base);
-		goto err_put_master;
-	}
-
-	version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION);
-	if (SPI_ENGINE_VERSION_MAJOR(version) != 1) {
-		dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n",
-			SPI_ENGINE_VERSION_MAJOR(version),
-			SPI_ENGINE_VERSION_MINOR(version),
-			SPI_ENGINE_VERSION_PATCH(version));
-		ret = -ENODEV;
-		goto err_put_master;
-	}
-
 	spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
 	if (IS_ERR(spi_engine->clk)) {
 		ret = PTR_ERR(spi_engine->clk);
@@ -525,6 +509,22 @@ static int spi_engine_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_clk_disable;
 
+	spi_engine->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(spi_engine->base)) {
+		ret = PTR_ERR(spi_engine->base);
+		goto err_ref_clk_disable;
+	}
+
+	version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION);
+	if (SPI_ENGINE_VERSION_MAJOR(version) != 1) {
+		dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n",
+			SPI_ENGINE_VERSION_MAJOR(version),
+			SPI_ENGINE_VERSION_MINOR(version),
+			SPI_ENGINE_VERSION_PATCH(version));
+		ret = -ENODEV;
+		goto err_ref_clk_disable;
+	}
+
 	writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_RESET);
 	writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
 	writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 23d295f36c80..681d09085175 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -91,6 +91,7 @@
 #define MSPI_MSPI_STATUS			0x020
 #define MSPI_CPTQP				0x024
 #define MSPI_SPCR3				0x028
+#define MSPI_REV				0x02c
 #define MSPI_TXRAM				0x040
 #define MSPI_RXRAM				0x0c0
 #define MSPI_CDRAM				0x140
@@ -106,14 +107,22 @@
 #define MSPI_SPCR2_SPE				BIT(6)
 #define MSPI_SPCR2_CONT_AFTER_CMD		BIT(7)
 
+#define MSPI_SPCR3_FASTBR			BIT(0)
+#define MSPI_SPCR3_FASTDT			BIT(1)
+#define MSPI_SPCR3_SYSCLKSEL_MASK		GENMASK(11, 10)
+#define MSPI_SPCR3_SYSCLKSEL_27			(MSPI_SPCR3_SYSCLKSEL_MASK & \
+						 ~(BIT(10) | BIT(11)))
+#define MSPI_SPCR3_SYSCLKSEL_108		(MSPI_SPCR3_SYSCLKSEL_MASK & \
+						 BIT(11))
+
 #define MSPI_MSPI_STATUS_SPIF			BIT(0)
 
 #define INTR_BASE_BIT_SHIFT			0x02
 #define INTR_COUNT				0x07
 
 #define NUM_CHIPSELECT				4
-#define QSPI_SPBR_MIN				8U
 #define QSPI_SPBR_MAX				255U
+#define MSPI_BASE_FREQ				27000000UL
 
 #define OPCODE_DIOR				0xBB
 #define OPCODE_QIOR				0xEB
@@ -217,6 +226,9 @@ struct bcm_qspi {
 	struct bcm_qspi_dev_id *dev_ids;
 	struct completion mspi_done;
 	struct completion bspi_done;
+	u8 mspi_maj_rev;
+	u8 mspi_min_rev;
+	bool mspi_spcr3_sysclk;
 };
 
 static inline bool has_bspi(struct bcm_qspi *qspi)
@@ -224,6 +236,36 @@ static inline bool has_bspi(struct bcm_qspi *qspi)
 	return qspi->bspi_mode;
 }
 
+/* hardware supports spcr3 and fast baud-rate  */
+static inline bool bcm_qspi_has_fastbr(struct bcm_qspi *qspi)
+{
+	if (!has_bspi(qspi) &&
+	    ((qspi->mspi_maj_rev >= 1) &&
+	     (qspi->mspi_min_rev >= 5)))
+		return true;
+
+	return false;
+}
+
+/* hardware supports sys clk 108Mhz  */
+static inline bool bcm_qspi_has_sysclk_108(struct bcm_qspi *qspi)
+{
+	if (!has_bspi(qspi) && (qspi->mspi_spcr3_sysclk ||
+	    ((qspi->mspi_maj_rev >= 1) &&
+	     (qspi->mspi_min_rev >= 6))))
+		return true;
+
+	return false;
+}
+
+static inline int bcm_qspi_spbr_min(struct bcm_qspi *qspi)
+{
+	if (bcm_qspi_has_fastbr(qspi))
+		return 1;
+	else
+		return 8;
+}
+
 /* Read qspi controller register*/
 static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
 				unsigned int offset)
@@ -531,16 +573,39 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 	if (xp->speed_hz)
 		spbr = qspi->base_clk / (2 * xp->speed_hz);
 
-	spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX);
+	spcr = clamp_val(spbr, bcm_qspi_spbr_min(qspi), QSPI_SPBR_MAX);
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
 
-	spcr = MSPI_MASTER_BIT;
+	if (!qspi->mspi_maj_rev)
+		/* legacy controller */
+		spcr = MSPI_MASTER_BIT;
+	else
+		spcr = 0;
+
 	/* for 16 bit the data should be zero */
 	if (xp->bits_per_word != 16)
 		spcr |= xp->bits_per_word << 2;
 	spcr |= xp->mode & 3;
+
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
 
+	if (bcm_qspi_has_fastbr(qspi)) {
+		spcr = 0;
+
+		/* enable fastbr */
+		spcr |=	MSPI_SPCR3_FASTBR;
+
+		if (bcm_qspi_has_sysclk_108(qspi)) {
+			/* SYSCLK_108 */
+			spcr |= MSPI_SPCR3_SYSCLKSEL_108;
+			qspi->base_clk = MSPI_BASE_FREQ * 4;
+			/* Change spbr as we changed sysclk */
+			bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, 4);
+		}
+
+		bcm_qspi_write(qspi, MSPI, MSPI_SPCR3, spcr);
+	}
+
 	qspi->last_parms = *xp;
 }
 
@@ -612,19 +677,15 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
 		if (qt->trans->cs_change &&
 		    (flags & TRANS_STATUS_BREAK_CS_CHANGE))
 			ret |= TRANS_STATUS_BREAK_CS_CHANGE;
-		if (ret)
-			goto done;
 
-		dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
 		if (bcm_qspi_mspi_transfer_is_last(qspi, qt))
-			ret = TRANS_STATUS_BREAK_EOM;
+			ret |= TRANS_STATUS_BREAK_EOM;
 		else
-			ret = TRANS_STATUS_BREAK_NO_BYTES;
+			ret |= TRANS_STATUS_BREAK_NO_BYTES;
 
 		qt->trans = NULL;
 	}
 
-done:
 	dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
 		qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
 	return ret;
@@ -670,7 +731,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
 			if (buf)
 				buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
 			dev_dbg(&qspi->pdev->dev, "RD %02x\n",
-				buf ? buf[tp.byte] : 0xff);
+				buf ? buf[tp.byte] : 0x0);
 		} else {
 			u16 *buf = tp.trans->rx_buf;
 
@@ -678,7 +739,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
 				buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
 								      slot);
 			dev_dbg(&qspi->pdev->dev, "RD %04x\n",
-				buf ? buf[tp.byte] : 0xffff);
+				buf ? buf[tp.byte / 2] : 0x0);
 		}
 
 		update_qspi_trans_byte_count(qspi, &tp,
@@ -733,13 +794,13 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 	while (!tstatus && slot < MSPI_NUM_CDRAM) {
 		if (tp.trans->bits_per_word <= 8) {
 			const u8 *buf = tp.trans->tx_buf;
-			u8 val = buf ? buf[tp.byte] : 0xff;
+			u8 val = buf ? buf[tp.byte] : 0x00;
 
 			write_txram_slot_u8(qspi, slot, val);
 			dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
 		} else {
 			const u16 *buf = tp.trans->tx_buf;
-			u16 val = buf ? buf[tp.byte / 2] : 0xffff;
+			u16 val = buf ? buf[tp.byte / 2] : 0x0000;
 
 			write_txram_slot_u16(qspi, slot, val);
 			dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
@@ -771,7 +832,16 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 	bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
 	bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
 
-	if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
+	/*
+	 *  case 1) EOM =1, cs_change =0: SSb inactive
+	 *  case 2) EOM =1, cs_change =1: SSb stay active
+	 *  case 3) EOM =0, cs_change =0: SSb stay active
+	 *  case 4) EOM =0, cs_change =1: SSb inactive
+	 */
+	if (((tstatus & TRANS_STATUS_BREAK_DESELECT)
+	     == TRANS_STATUS_BREAK_CS_CHANGE) ||
+	    ((tstatus & TRANS_STATUS_BREAK_DESELECT)
+	     == TRANS_STATUS_BREAK_EOM)) {
 		mspi_cdram = read_cdram_slot(qspi, slot - 1) &
 			~MSPI_CDRAM_CONT_BIT;
 		write_cdram_slot(qspi, slot - 1, mspi_cdram);
@@ -1190,8 +1260,51 @@ static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
 	.exec_op = bcm_qspi_exec_mem_op,
 };
 
+struct bcm_qspi_data {
+	bool	has_mspi_rev;
+	bool	has_spcr3_sysclk;
+};
+
+static const struct bcm_qspi_data bcm_qspi_no_rev_data = {
+	.has_mspi_rev	= false,
+	.has_spcr3_sysclk = false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_rev_data = {
+	.has_mspi_rev	= true,
+	.has_spcr3_sysclk = false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_spcr3_data = {
+	.has_mspi_rev	= true,
+	.has_spcr3_sysclk = true,
+};
+
 static const struct of_device_id bcm_qspi_of_match[] = {
-	{ .compatible = "brcm,spi-bcm-qspi" },
+	{
+		.compatible = "brcm,spi-bcm7425-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7429-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7435-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm-qspi",
+		.data = &bcm_qspi_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7216-qspi",
+		.data = &bcm_qspi_spcr3_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7278-qspi",
+		.data = &bcm_qspi_spcr3_data,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
@@ -1199,12 +1312,15 @@ MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
 int bcm_qspi_probe(struct platform_device *pdev,
 		   struct bcm_qspi_soc_intc *soc_intc)
 {
+	const struct of_device_id *of_id = NULL;
+	const struct bcm_qspi_data *data;
 	struct device *dev = &pdev->dev;
 	struct bcm_qspi *qspi;
 	struct spi_master *master;
 	struct resource *res;
 	int irq, ret = 0, num_ints = 0;
 	u32 val;
+	u32 rev = 0;
 	const char *name = NULL;
 	int num_irqs = ARRAY_SIZE(qspi_irq_tab);
 
@@ -1212,9 +1328,12 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	if (!dev->of_node)
 		return -ENODEV;
 
-	if (!of_match_node(bcm_qspi_of_match, dev->of_node))
+	of_id = of_match_node(bcm_qspi_of_match, dev->of_node);
+	if (!of_id)
 		return -ENODEV;
 
+	data = of_id->data;
+
 	master = spi_alloc_master(dev, sizeof(struct bcm_qspi));
 	if (!master) {
 		dev_err(dev, "error allocating spi_master\n");
@@ -1222,6 +1341,11 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	}
 
 	qspi = spi_master_get_devdata(master);
+
+	qspi->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(qspi->clk))
+		return PTR_ERR(qspi->clk);
+
 	qspi->pdev = pdev;
 	qspi->trans_pos.trans = NULL;
 	qspi->trans_pos.byte = 0;
@@ -1335,13 +1459,6 @@ int bcm_qspi_probe(struct platform_device *pdev,
 		qspi->soc_intc = NULL;
 	}
 
-	qspi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(qspi->clk)) {
-		dev_warn(dev, "unable to get clock\n");
-		ret = PTR_ERR(qspi->clk);
-		goto qspi_probe_err;
-	}
-
 	ret = clk_prepare_enable(qspi->clk);
 	if (ret) {
 		dev_err(dev, "failed to prepare clock\n");
@@ -1349,7 +1466,19 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	}
 
 	qspi->base_clk = clk_get_rate(qspi->clk);
-	qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
+
+	if (data->has_mspi_rev) {
+		rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
+		/* some older revs do not have a MSPI_REV register */
+		if ((rev & 0xff) == 0xff)
+			rev = 0;
+	}
+
+	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
+	qspi->mspi_min_rev = rev & 0xf;
+	qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
+
+	qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
 
 	bcm_qspi_hw_init(qspi);
 	init_completion(&qspi->mspi_done);
@@ -1406,7 +1535,7 @@ static int __maybe_unused bcm_qspi_suspend(struct device *dev)
 			bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
 
 	spi_master_suspend(qspi->master);
-	clk_disable(qspi->clk);
+	clk_disable_unprepare(qspi->clk);
 	bcm_qspi_hw_uninit(qspi);
 
 	return 0;
@@ -1424,7 +1553,7 @@ static int __maybe_unused bcm_qspi_resume(struct device *dev)
 		qspi->soc_intc->bcm_qspi_int_set(qspi->soc_intc, MSPI_DONE,
 						 true);
 
-	ret = clk_enable(qspi->clk);
+	ret = clk_prepare_enable(qspi->clk);
 	if (!ret)
 		spi_master_resume(qspi->master);
 
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 31e3f866d11a..2b79c5a983c0 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -24,11 +24,8 @@ struct chip_data {
 	u8 tmode;		/* TR/TO/RO/EEPROM */
 	u8 type;		/* SPI/SSP/MicroWire */
 
-	u8 poll_mode;		/* 1 means use poll mode */
-
 	u16 clk_div;		/* baud rate divider */
 	u32 speed_hz;		/* baud rate */
-	void (*cs_control)(u32 command);
 };
 
 #ifdef CONFIG_DEBUG_FS
@@ -127,11 +124,6 @@ static inline void dw_spi_debugfs_remove(struct dw_spi *dws)
 void dw_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
-	struct chip_data *chip = spi_get_ctldata(spi);
-
-	/* Chip select logic is inverted from spi_set_cs() */
-	if (chip && chip->cs_control)
-		chip->cs_control(!enable);
 
 	if (!enable)
 		dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
@@ -265,18 +257,6 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id)
 	return dws->transfer_handler(dws);
 }
 
-/* Must be called inside pump_transfers() */
-static int poll_transfer(struct dw_spi *dws)
-{
-	do {
-		dw_writer(dws);
-		dw_reader(dws);
-		cpu_relax();
-	} while (dws->rx_end > dws->rx);
-
-	return 0;
-}
-
 static int dw_spi_transfer_one(struct spi_controller *master,
 		struct spi_device *spi, struct spi_transfer *transfer)
 {
@@ -324,22 +304,6 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 			(((spi->mode & SPI_LOOP) ? 1 : 0) << SPI_SRL_OFFSET))
 		| (chip->tmode << SPI_TMOD_OFFSET);
 
-	/*
-	 * Adjust transfer mode if necessary. Requires platform dependent
-	 * chipselect mechanism.
-	 */
-	if (chip->cs_control) {
-		if (dws->rx && dws->tx)
-			chip->tmode = SPI_TMOD_TR;
-		else if (dws->rx)
-			chip->tmode = SPI_TMOD_RO;
-		else
-			chip->tmode = SPI_TMOD_TO;
-
-		cr0 &= ~SPI_TMOD_MASK;
-		cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
-	}
-
 	dw_writel(dws, DW_SPI_CTRL0, cr0);
 
 	/* Check if current transfer is a DMA transaction */
@@ -359,7 +323,7 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 			spi_enable_chip(dws, 1);
 			return ret;
 		}
-	} else if (!chip->poll_mode) {
+	} else {
 		txlevel = min_t(u16, dws->fifo_len / 2, dws->len / dws->n_bytes);
 		dw_writel(dws, DW_SPI_TXFLTR, txlevel);
 
@@ -379,9 +343,6 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 			return ret;
 	}
 
-	if (chip->poll_mode)
-		return poll_transfer(dws);
-
 	return 1;
 }
 
@@ -399,7 +360,6 @@ static void dw_spi_handle_err(struct spi_controller *master,
 /* This may be called twice for each spi dev */
 static int dw_spi_setup(struct spi_device *spi)
 {
-	struct dw_spi_chip *chip_info = NULL;
 	struct chip_data *chip;
 
 	/* Only alloc on first setup */
@@ -411,21 +371,6 @@ static int dw_spi_setup(struct spi_device *spi)
 		spi_set_ctldata(spi, chip);
 	}
 
-	/*
-	 * Protocol drivers may change the chip settings, so...
-	 * if chip_info exists, use it
-	 */
-	chip_info = spi->controller_data;
-
-	/* chip_info doesn't always exist */
-	if (chip_info) {
-		if (chip_info->cs_control)
-			chip->cs_control = chip_info->cs_control;
-
-		chip->poll_mode = chip_info->poll_mode;
-		chip->type = chip_info->type;
-	}
-
 	chip->tmode = SPI_TMOD_TR;
 
 	return 0;
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 1bf5713e047d..44ef18187c15 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -235,18 +235,6 @@ static inline void spi_shutdown_chip(struct dw_spi *dws)
 	spi_set_clk(dws, 0);
 }
 
-/*
- * Each SPI slave device to work with dw_api controller should
- * has such a structure claiming its working mode (poll or PIO/DMA),
- * which can be save in the "controller_data" member of the
- * struct spi_device.
- */
-struct dw_spi_chip {
-	u8 poll_mode;	/* 1 for controller polling mode */
-	u8 type;	/* SPI/SSP/MicroWire */
-	void (*cs_control)(u32 command);
-};
-
 extern void dw_spi_set_cs(struct spi_device *spi, bool enable);
 extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
 extern void dw_spi_remove_host(struct dw_spi *dws);
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 4e1ccd4e52b6..8c854b187b1d 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -31,7 +31,8 @@
 #include <linux/platform_data/spi-ep93xx.h>
 
 #define SSPCR0			0x0000
-#define SSPCR0_MODE_SHIFT	6
+#define SSPCR0_SPO		BIT(6)
+#define SSPCR0_SPH		BIT(7)
 #define SSPCR0_SCR_SHIFT	8
 
 #define SSPCR1			0x0004
@@ -159,7 +160,10 @@ static int ep93xx_spi_chip_setup(struct spi_master *master,
 		return err;
 
 	cr0 = div_scr << SSPCR0_SCR_SHIFT;
-	cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT;
+	if (spi->mode & SPI_CPOL)
+		cr0 |= SSPCR0_SPO;
+	if (spi->mode & SPI_CPHA)
+		cr0 |= SSPCR0_SPH;
 	cr0 |= dss;
 
 	dev_dbg(&master->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 50e41f66a2d7..685afdf9e807 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 //
 // Copyright 2013 Freescale Semiconductor, Inc.
+// Copyright 2020 NXP
 //
 // Freescale DSPI driver
 // This file contains a driver for the Freescale DSPI
@@ -26,6 +27,9 @@
 #define SPI_MCR_CLR_TXF			BIT(11)
 #define SPI_MCR_CLR_RXF			BIT(10)
 #define SPI_MCR_XSPI			BIT(3)
+#define SPI_MCR_DIS_TXF			BIT(13)
+#define SPI_MCR_DIS_RXF			BIT(12)
+#define SPI_MCR_HALT			BIT(0)
 
 #define SPI_TCR				0x08
 #define SPI_TCR_GET_TCNT(x)		(((x) & GENMASK(31, 16)) >> 16)
@@ -1417,6 +1421,24 @@ static int dspi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void dspi_shutdown(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr = platform_get_drvdata(pdev);
+	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
+
+	/* Disable RX and TX */
+	regmap_update_bits(dspi->regmap, SPI_MCR,
+			   SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF,
+			   SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF);
+
+	/* Stop Running */
+	regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT);
+
+	dspi_release_dma(dspi);
+	clk_disable_unprepare(dspi->clk);
+	spi_unregister_controller(dspi->ctlr);
+}
+
 static struct platform_driver fsl_dspi_driver = {
 	.driver.name		= DRIVER_NAME,
 	.driver.of_match_table	= fsl_dspi_dt_ids,
@@ -1424,6 +1446,7 @@ static struct platform_driver fsl_dspi_driver = {
 	.driver.pm		= &dspi_pm,
 	.probe			= dspi_probe,
 	.remove			= dspi_remove,
+	.shutdown		= dspi_shutdown,
 };
 module_platform_driver(fsl_dspi_driver);
 
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 8b41b70f6f5c..511211b82430 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -186,14 +186,13 @@ static bool fsl_lpspi_can_dma(struct spi_controller *controller,
 
 	bytes_per_word = fsl_lpspi_bytes_per_word(transfer->bits_per_word);
 
-	switch (bytes_per_word)
-	{
-		case 1:
-		case 2:
-		case 4:
-			break;
-		default:
-			return false;
+	switch (bytes_per_word) {
+	case 1:
+	case 2:
+	case 4:
+		break;
+	default:
+		return false;
 	}
 
 	return true;
diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c
index 02e5cba0a5bb..6766262d7e75 100644
--- a/drivers/spi/spi-fsl-qspi.c
+++ b/drivers/spi/spi-fsl-qspi.c
@@ -876,14 +876,15 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					"QuadSPI-memory");
-	q->ahb_addr = devm_ioremap_resource(dev, res);
-	if (IS_ERR(q->ahb_addr)) {
-		ret = PTR_ERR(q->ahb_addr);
+	q->memmap_phy = res->start;
+	/* Since there are 4 cs, map size required is 4 times ahb_buf_size */
+	q->ahb_addr = devm_ioremap(dev, q->memmap_phy,
+				   (q->devtype_data->ahb_buf_size * 4));
+	if (!q->ahb_addr) {
+		ret = -ENOMEM;
 		goto err_put_ctrl;
 	}
 
-	q->memmap_phy = res->start;
-
 	/* find the clocks */
 	q->clk_en = devm_clk_get(dev, "qspi_en");
 	if (IS_ERR(q->clk_en)) {
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 3b81772fea0d..67f022b8c81d 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -588,7 +588,7 @@ static void fsl_spi_grlib_probe(struct device *dev)
 	pdata->cs_control = fsl_spi_grlib_cs_control;
 }
 
-static struct spi_master * fsl_spi_probe(struct device *dev,
+static struct spi_master *fsl_spi_probe(struct device *dev,
 		struct resource *mem, unsigned int irq)
 {
 	struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c
index e3b57252d075..64a18d08a4d9 100644
--- a/drivers/spi/spi-hisi-sfc-v3xx.c
+++ b/drivers/spi/spi-hisi-sfc-v3xx.c
@@ -17,6 +17,11 @@
 
 #define HISI_SFC_V3XX_VERSION (0x1f8)
 
+#define HISI_SFC_V3XX_INT_STAT (0x120)
+#define HISI_SFC_V3XX_INT_STAT_PP_ERR BIT(2)
+#define HISI_SFC_V3XX_INT_STAT_ADDR_IACCES BIT(5)
+#define HISI_SFC_V3XX_INT_CLR (0x12c)
+#define HISI_SFC_V3XX_INT_CLR_CLEAR (0xff)
 #define HISI_SFC_V3XX_CMD_CFG (0x300)
 #define HISI_SFC_V3XX_CMD_CFG_DUAL_IN_DUAL_OUT (1 << 17)
 #define HISI_SFC_V3XX_CMD_CFG_DUAL_IO (2 << 17)
@@ -163,7 +168,7 @@ static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
 					 u8 chip_select)
 {
 	int ret, len = op->data.nbytes;
-	u32 config = 0;
+	u32 int_stat, config = 0;
 
 	if (op->addr.nbytes)
 		config |= HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK;
@@ -228,6 +233,25 @@ static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
 	if (ret)
 		return ret;
 
+	/*
+	 * The interrupt status register indicates whether an error occurs
+	 * after per operation. Check it, and clear the interrupts for
+	 * next time judgement.
+	 */
+	int_stat = readl(host->regbase + HISI_SFC_V3XX_INT_STAT);
+	writel(HISI_SFC_V3XX_INT_CLR_CLEAR,
+	       host->regbase + HISI_SFC_V3XX_INT_CLR);
+
+	if (int_stat & HISI_SFC_V3XX_INT_STAT_ADDR_IACCES) {
+		dev_err(host->dev, "fail to access protected address\n");
+		return -EIO;
+	}
+
+	if (int_stat & HISI_SFC_V3XX_INT_STAT_PP_ERR) {
+		dev_err(host->dev, "page program operation failed\n");
+		return -EIO;
+	}
+
 	if (op->data.dir == SPI_MEM_DATA_IN)
 		hisi_sfc_v3xx_read_databuf(host, op->data.buf.in, len);
 
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index adaa0c49f966..9a86cc27fcc0 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -108,15 +108,17 @@ static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
 		return 0;
 
 	case 2:
-		if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
-		    (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
+		if ((tx &&
+		     (mode & (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx &&
+		     (mode & (SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL))))
 			return 0;
 
 		break;
 
 	case 4:
-		if ((tx && (mode & SPI_TX_QUAD)) ||
-		    (!tx && (mode & SPI_RX_QUAD)))
+		if ((tx && (mode & (SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx && (mode & (SPI_RX_QUAD | SPI_RX_OCTAL))))
 			return 0;
 
 		break;
diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c
index c15a9910549f..7bc302b50396 100644
--- a/drivers/spi/spi-mtk-nor.c
+++ b/drivers/spi/spi-mtk-nor.c
@@ -391,7 +391,7 @@ static int mtk_nor_pp_unbuffered(struct mtk_nor *sp,
 	return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE, 6 * BITS_PER_BYTE);
 }
 
-int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+static int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 {
 	struct mtk_nor *sp = spi_controller_get_devdata(mem->spi->master);
 	int ret;
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 1f59beb7d27e..43f73db22f21 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -17,10 +17,8 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/clk.h>
 #include <linux/sizes.h>
-#include <linux/gpio.h>
 #include <asm/unaligned.h>
 
 #define DRIVER_NAME			"orion_spi"
@@ -98,7 +96,6 @@ struct orion_spi {
 	struct clk              *clk;
 	struct clk              *axi_clk;
 	const struct orion_spi_dev *devdata;
-	int			unused_hw_gpio;
 
 	struct orion_child_options	child[ORION_NUM_CHIPSELECTS];
 };
@@ -325,20 +322,27 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 static void orion_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	struct orion_spi *orion_spi;
-	int cs;
 
 	orion_spi = spi_master_get_devdata(spi->master);
 
-	if (gpio_is_valid(spi->cs_gpio))
-		cs = orion_spi->unused_hw_gpio;
-	else
-		cs = spi->chip_select;
-
+	/*
+	 * If this line is using a GPIO to control chip select, this internal
+	 * .set_cs() function will still be called, so we clear any previous
+	 * chip select. The CS we activate will not have any elecrical effect,
+	 * as it is handled by a GPIO, but that doesn't matter. What we need
+	 * is to deassert the old chip select and assert some other chip select.
+	 */
 	orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK);
 	orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG,
-				ORION_SPI_CS(cs));
+			  ORION_SPI_CS(spi->chip_select));
 
-	/* Chip select logic is inverted from spi_set_cs */
+	/*
+	 * Chip select logic is inverted from spi_set_cs(). For lines using a
+	 * GPIO to do chip select SPI_CS_HIGH is enforced and inversion happens
+	 * in the GPIO library, but we don't care about that, because in those
+	 * cases we are dealing with an unused native CS anyways so the polarity
+	 * doesn't matter.
+	 */
 	if (!enable)
 		orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
 	else
@@ -503,9 +507,6 @@ static int orion_spi_transfer_one(struct spi_master *master,
 
 static int orion_spi_setup(struct spi_device *spi)
 {
-	if (gpio_is_valid(spi->cs_gpio)) {
-		gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
-	}
 	return orion_spi_setup_transfer(spi, NULL);
 }
 
@@ -622,13 +623,13 @@ static int orion_spi_probe(struct platform_device *pdev)
 	master->setup = orion_spi_setup;
 	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
 	master->auto_runtime_pm = true;
+	master->use_gpio_descriptors = true;
 	master->flags = SPI_MASTER_GPIO_SS;
 
 	platform_set_drvdata(pdev, master);
 
 	spi = spi_master_get_devdata(master);
 	spi->master = master;
-	spi->unused_hw_gpio = -1;
 
 	of_id = of_match_device(orion_spi_of_match_table, &pdev->dev);
 	devdata = (of_id) ? of_id->data : &orion_spi_dev_data;
@@ -683,7 +684,6 @@ static int orion_spi_probe(struct platform_device *pdev)
 	for_each_available_child_of_node(pdev->dev.of_node, np) {
 		struct orion_direct_acc *dir_acc;
 		u32 cs;
-		int cs_gpio;
 
 		/* Get chip-select number from the "reg" property */
 		status = of_property_read_u32(np, "reg", &cs);
@@ -694,44 +694,6 @@ static int orion_spi_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		/*
-		 * Initialize the CS GPIO:
-		 * - properly request the actual GPIO signal
-		 * - de-assert the logical signal so that all GPIO CS lines
-		 *   are inactive when probing for slaves
-		 * - find an unused physical CS which will be driven for any
-		 *   slave which uses a CS GPIO
-		 */
-		cs_gpio = of_get_named_gpio(pdev->dev.of_node, "cs-gpios", cs);
-		if (cs_gpio > 0) {
-			char *gpio_name;
-			int cs_flags;
-
-			if (spi->unused_hw_gpio == -1) {
-				dev_info(&pdev->dev,
-					"Selected unused HW CS#%d for any GPIO CSes\n",
-					cs);
-				spi->unused_hw_gpio = cs;
-			}
-
-			gpio_name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
-					"%s-CS%d", dev_name(&pdev->dev), cs);
-			if (!gpio_name) {
-				status = -ENOMEM;
-				goto out_rel_axi_clk;
-			}
-
-			cs_flags = of_property_read_bool(np, "spi-cs-high") ?
-				GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH;
-			status = devm_gpio_request_one(&pdev->dev, cs_gpio,
-					cs_flags, gpio_name);
-			if (status) {
-				dev_err(&pdev->dev,
-					"Can't request GPIO for CS %d\n", cs);
-				goto out_rel_axi_clk;
-			}
-		}
-
 		/*
 		 * Check if an address is configured for this SPI device. If
 		 * not, the MBus mapping via the 'ranges' property in the 'soc'
diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c
index 5497eeb3bf3e..ee0f3edf49cd 100644
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -345,6 +345,6 @@ static struct i2c_driver sc18is602_driver = {
 
 module_i2c_driver(sc18is602_driver);
 
-MODULE_DESCRIPTION("SC18IC602/603 SPI Master Driver");
+MODULE_DESCRIPTION("SC18IS602/603 SPI Master Driver");
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 1c11a00a2c36..b2579af0e3eb 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -1398,7 +1398,7 @@ static int sh_msiof_spi_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(sh_msiof_spi_pm_ops, sh_msiof_spi_suspend,
 			 sh_msiof_spi_resume);
-#define DEV_PM_OPS	&sh_msiof_spi_pm_ops
+#define DEV_PM_OPS	(&sh_msiof_spi_pm_ops)
 #else
 #define DEV_PM_OPS	NULL
 #endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c
index 87dadb6b8ebf..88e6543648cb 100644
--- a/drivers/spi/spi-sprd-adi.c
+++ b/drivers/spi/spi-sprd-adi.c
@@ -319,7 +319,7 @@ static int sprd_adi_transfer_one(struct spi_controller *ctlr,
 
 static void sprd_adi_set_wdt_rst_mode(struct sprd_adi *sadi)
 {
-#ifdef CONFIG_SPRD_WATCHDOG
+#if IS_ENABLED(CONFIG_SPRD_WATCHDOG)
 	u32 val;
 
 	/* Set default watchdog reboot mode */
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index d066f5144c3e..3c44bb2fd9b1 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -16,6 +16,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/sizes.h>
@@ -87,6 +88,7 @@
 #define STM32_BUSY_TIMEOUT_US 100000
 #define STM32_ABT_TIMEOUT_US 100000
 #define STM32_COMP_TIMEOUT_MS 1000
+#define STM32_AUTOSUSPEND_DELAY -1
 
 struct stm32_qspi_flash {
 	struct stm32_qspi *qspi;
@@ -431,10 +433,17 @@ static int stm32_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master);
 	int ret;
 
+	ret = pm_runtime_get_sync(qspi->dev);
+	if (ret < 0)
+		return ret;
+
 	mutex_lock(&qspi->lock);
 	ret = stm32_qspi_send(mem, op);
 	mutex_unlock(&qspi->lock);
 
+	pm_runtime_mark_last_busy(qspi->dev);
+	pm_runtime_put_autosuspend(qspi->dev);
+
 	return ret;
 }
 
@@ -444,6 +453,7 @@ static int stm32_qspi_setup(struct spi_device *spi)
 	struct stm32_qspi *qspi = spi_controller_get_devdata(ctrl);
 	struct stm32_qspi_flash *flash;
 	u32 presc;
+	int ret;
 
 	if (ctrl->busy)
 		return -EBUSY;
@@ -451,6 +461,10 @@ static int stm32_qspi_setup(struct spi_device *spi)
 	if (!spi->max_speed_hz)
 		return -EINVAL;
 
+	ret = pm_runtime_get_sync(qspi->dev);
+	if (ret < 0)
+		return ret;
+
 	presc = DIV_ROUND_UP(qspi->clk_rate, spi->max_speed_hz) - 1;
 
 	flash = &qspi->flash[spi->chip_select];
@@ -467,6 +481,9 @@ static int stm32_qspi_setup(struct spi_device *spi)
 	writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR);
 	mutex_unlock(&qspi->lock);
 
+	pm_runtime_mark_last_busy(qspi->dev);
+	pm_runtime_put_autosuspend(qspi->dev);
+
 	return 0;
 }
 
@@ -538,10 +555,15 @@ static const struct spi_controller_mem_ops stm32_qspi_mem_ops = {
 
 static void stm32_qspi_release(struct stm32_qspi *qspi)
 {
+	pm_runtime_get_sync(qspi->dev);
 	/* disable qspi */
 	writel_relaxed(0, qspi->io_base + QSPI_CR);
 	stm32_qspi_dma_free(qspi);
 	mutex_destroy(&qspi->lock);
+	pm_runtime_put_noidle(qspi->dev);
+	pm_runtime_disable(qspi->dev);
+	pm_runtime_set_suspended(qspi->dev);
+	pm_runtime_dont_use_autosuspend(qspi->dev);
 	clk_disable_unprepare(qspi->clk);
 }
 
@@ -643,9 +665,20 @@ static int stm32_qspi_probe(struct platform_device *pdev)
 	ctrl->num_chipselect = STM32_QSPI_MAX_NORCHIP;
 	ctrl->dev.of_node = dev->of_node;
 
+	pm_runtime_set_autosuspend_delay(dev, STM32_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_get_noresume(dev);
+
 	ret = devm_spi_register_master(dev, ctrl);
-	if (!ret)
-		return 0;
+	if (ret)
+		goto err_qspi_release;
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
 
 err_qspi_release:
 	stm32_qspi_release(qspi);
@@ -660,14 +693,28 @@ static int stm32_qspi_remove(struct platform_device *pdev)
 	struct stm32_qspi *qspi = platform_get_drvdata(pdev);
 
 	stm32_qspi_release(qspi);
+
 	return 0;
 }
 
-static int __maybe_unused stm32_qspi_suspend(struct device *dev)
+static int __maybe_unused stm32_qspi_runtime_suspend(struct device *dev)
 {
 	struct stm32_qspi *qspi = dev_get_drvdata(dev);
 
 	clk_disable_unprepare(qspi->clk);
+
+	return 0;
+}
+
+static int __maybe_unused stm32_qspi_runtime_resume(struct device *dev)
+{
+	struct stm32_qspi *qspi = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(qspi->clk);
+}
+
+static int __maybe_unused stm32_qspi_suspend(struct device *dev)
+{
 	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
@@ -683,10 +730,17 @@ static int __maybe_unused stm32_qspi_resume(struct device *dev)
 	writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR);
 	writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR);
 
+	pm_runtime_mark_last_busy(qspi->dev);
+	pm_runtime_put_autosuspend(qspi->dev);
+
 	return 0;
 }
 
-static SIMPLE_DEV_PM_OPS(stm32_qspi_pm_ops, stm32_qspi_suspend, stm32_qspi_resume);
+static const struct dev_pm_ops stm32_qspi_pm_ops = {
+	SET_RUNTIME_PM_OPS(stm32_qspi_runtime_suspend,
+			   stm32_qspi_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(stm32_qspi_suspend, stm32_qspi_resume)
+};
 
 static const struct of_device_id stm32_qspi_match[] = {
 	{.compatible = "st,stm32f469-qspi"},
diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c
index 0fa50979644d..0457d3376873 100644
--- a/drivers/spi/spi-uniphier.c
+++ b/drivers/spi/spi-uniphier.c
@@ -716,8 +716,10 @@ static int uniphier_spi_probe(struct platform_device *pdev)
 
 	master->dma_tx = dma_request_chan(&pdev->dev, "tx");
 	if (IS_ERR_OR_NULL(master->dma_tx)) {
-		if (PTR_ERR(master->dma_tx) == -EPROBE_DEFER)
+		if (PTR_ERR(master->dma_tx) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
 			goto out_disable_clk;
+		}
 		master->dma_tx = NULL;
 		dma_tx_burst = INT_MAX;
 	} else {
@@ -732,8 +734,10 @@ static int uniphier_spi_probe(struct platform_device *pdev)
 
 	master->dma_rx = dma_request_chan(&pdev->dev, "rx");
 	if (IS_ERR_OR_NULL(master->dma_rx)) {
-		if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER)
+		if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
 			goto out_disable_clk;
+		}
 		master->dma_rx = NULL;
 		dma_rx_burst = INT_MAX;
 	} else {
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c92c89467e7e..c083ee3995e4 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1075,7 +1075,7 @@ static int spi_transfer_wait(struct spi_controller *ctlr,
 {
 	struct spi_statistics *statm = &ctlr->statistics;
 	struct spi_statistics *stats = &msg->spi->statistics;
-	unsigned long long ms = 1;
+	unsigned long long ms;
 
 	if (spi_controller_is_slave(ctlr)) {
 		if (wait_for_completion_interruptible(&ctlr->xfer_completion)) {
@@ -2111,6 +2111,7 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 			}
 
 			lookup->max_speed_hz = sb->connection_speed;
+			lookup->bits_per_word = sb->data_bit_length;
 
 			if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
 				lookup->mode |= SPI_CPHA;
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 80dd1025b953..d753df700e9e 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -62,7 +62,8 @@ static DECLARE_BITMAP(minors, N_SPI_MINORS);
 #define SPI_MODE_MASK		(SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
 				| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
 				| SPI_NO_CS | SPI_READY | SPI_TX_DUAL \
-				| SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)
+				| SPI_TX_QUAD | SPI_TX_OCTAL | SPI_RX_DUAL \
+				| SPI_RX_QUAD | SPI_RX_OCTAL)
 
 struct spidev_data {
 	dev_t			devt;
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index 6ceee98ed6ff..b97a5c32d44a 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -400,7 +400,8 @@ int ssb_bus_scan(struct ssb_bus *bus,
 #ifdef CONFIG_SSB_DRIVER_PCICORE
 			if (bus->bustype == SSB_BUSTYPE_PCI) {
 				/* Ignore PCI cores on PCI-E cards.
-				 * Ignore PCI-E cores on PCI cards. */
+				 * Ignore PCI-E cores on PCI cards.
+				 */
 				if (dev->id.coreid == SSB_DEV_PCI) {
 					if (pci_is_pcie(bus->host_pci))
 						continue;
@@ -421,7 +422,8 @@ int ssb_bus_scan(struct ssb_bus *bus,
 				if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
 				    (bus->host_pci->device & 0xFF00) == 0x4300) {
 					/* This is a dangling ethernet core on a
-					 * wireless device. Ignore it. */
+					 * wireless device. Ignore it.
+					 */
 					continue;
 				}
 			}
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index 52d2e0f33be7..42d620cee8a9 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -78,7 +78,8 @@ ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf,
 
 	/* Use interruptible locking, as the SPROM write might
 	 * be holding the lock for several seconds. So allow userspace
-	 * to cancel operation. */
+	 * to cancel operation.
+	 */
 	err = -ERESTARTSYS;
 	if (mutex_lock_interruptible(&bus->sprom_mutex))
 		goto out_kfree;
@@ -121,7 +122,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
 
 	/* Use interruptible locking, as the SPROM write might
 	 * be holding the lock for several seconds. So allow userspace
-	 * to cancel operation. */
+	 * to cancel operation.
+	 */
 	err = -ERESTARTSYS;
 	if (mutex_lock_interruptible(&bus->sprom_mutex))
 		goto out_kfree;
@@ -188,9 +190,11 @@ int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
 bool ssb_is_sprom_available(struct ssb_bus *bus)
 {
 	/* status register only exists on chipcomon rev >= 11 and we need check
-	   for >= 31 only */
+	 * for >= 31 only
+	 */
 	/* this routine differs from specs as we do not access SPROM directly
-	   on PCMCIA */
+	 * on PCMCIA
+	 */
 	if (bus->bustype == SSB_BUSTYPE_PCI &&
 	    bus->chipco.dev &&	/* can be unavailable! */
 	    bus->chipco.dev->id.revision >= 31)
diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c
index 473b465724f1..0755b11348ed 100644
--- a/drivers/staging/android/ion/ion_heap.c
+++ b/drivers/staging/android/ion/ion_heap.c
@@ -99,12 +99,12 @@ int ion_heap_map_user(struct ion_heap *heap, struct ion_buffer *buffer,
 
 static int ion_heap_clear_pages(struct page **pages, int num, pgprot_t pgprot)
 {
-	void *addr = vm_map_ram(pages, num, -1, pgprot);
+	void *addr = vmap(pages, num, VM_MAP, pgprot);
 
 	if (!addr)
 		return -ENOMEM;
 	memset(addr, 0, PAGE_SIZE * num);
-	vm_unmap_ram(addr, num);
+	vunmap(addr);
 
 	return 0;
 }
diff --git a/drivers/staging/android/ion/ion_page_pool.c b/drivers/staging/android/ion/ion_page_pool.c
index f85ec5b16b65..0198b886d906 100644
--- a/drivers/staging/android/ion/ion_page_pool.c
+++ b/drivers/staging/android/ion/ion_page_pool.c
@@ -37,7 +37,7 @@ static void ion_page_pool_add(struct ion_page_pool *pool, struct page *page)
 	}
 
 	mod_node_page_state(page_pgdat(page), NR_KERNEL_MISC_RECLAIMABLE,
-							1 << pool->order);
+			    1 << pool->order);
 	mutex_unlock(&pool->mutex);
 }
 
@@ -57,7 +57,7 @@ static struct page *ion_page_pool_remove(struct ion_page_pool *pool, bool high)
 
 	list_del(&page->lru);
 	mod_node_page_state(page_pgdat(page), NR_KERNEL_MISC_RECLAIMABLE,
-							-(1 << pool->order));
+			    -(1 << pool->order));
 	return page;
 }
 
diff --git a/drivers/staging/axis-fifo/axis-fifo.c b/drivers/staging/axis-fifo/axis-fifo.c
index 5801067e7c1b..2bb1c2e9cb57 100644
--- a/drivers/staging/axis-fifo/axis-fifo.c
+++ b/drivers/staging/axis-fifo/axis-fifo.c
@@ -383,8 +383,9 @@ static ssize_t axis_fifo_read(struct file *f, char __user *buf,
 		mutex_lock(&fifo->read_lock);
 		ret = wait_event_interruptible_timeout(fifo->read_queue,
 			ioread32(fifo->base_addr + XLLF_RDFO_OFFSET),
-			(read_timeout >= 0) ? msecs_to_jiffies(read_timeout) :
-				MAX_SCHEDULE_TIMEOUT);
+				 (read_timeout >= 0) ?
+				  msecs_to_jiffies(read_timeout) :
+				  MAX_SCHEDULE_TIMEOUT);
 
 		if (ret <= 0) {
 			if (ret == 0) {
@@ -525,9 +526,10 @@ static ssize_t axis_fifo_write(struct file *f, const char __user *buf,
 		mutex_lock(&fifo->write_lock);
 		ret = wait_event_interruptible_timeout(fifo->write_queue,
 			ioread32(fifo->base_addr + XLLF_TDFV_OFFSET)
-				>= words_to_write,
-			(write_timeout >= 0) ? msecs_to_jiffies(write_timeout) :
-				MAX_SCHEDULE_TIMEOUT);
+				 >= words_to_write,
+				 (write_timeout >= 0) ?
+				  msecs_to_jiffies(write_timeout) :
+				  MAX_SCHEDULE_TIMEOUT);
 
 		if (ret <= 0) {
 			if (ret == 0) {
diff --git a/drivers/staging/comedi/comedi_internal.h b/drivers/staging/comedi/comedi_internal.h
index 515f293a5d26..1d54a0dba347 100644
--- a/drivers/staging/comedi/comedi_internal.h
+++ b/drivers/staging/comedi/comedi_internal.h
@@ -32,8 +32,8 @@ void comedi_buf_map_get(struct comedi_buf_map *bm);
 int comedi_buf_map_put(struct comedi_buf_map *bm);
 int comedi_buf_map_access(struct comedi_buf_map *bm, unsigned long offset,
 			  void *buf, int len, int write);
-struct comedi_buf_map *comedi_buf_map_from_subdev_get(
-		struct comedi_subdevice *s);
+struct comedi_buf_map *
+comedi_buf_map_from_subdev_get(struct comedi_subdevice *s);
 unsigned int comedi_buf_write_n_available(struct comedi_subdevice *s);
 unsigned int comedi_buf_write_n_allocated(struct comedi_subdevice *s);
 void comedi_device_cancel_all(struct comedi_device *dev);
diff --git a/drivers/staging/fsl-dpaa2/ethsw/ethsw.c b/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
index 676d1ad1b50d..546ad376df99 100644
--- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
@@ -1094,7 +1094,8 @@ static int swdev_port_obj_del(struct net_device *netdev,
 
 static int
 ethsw_switchdev_port_attr_set_event(struct net_device *netdev,
-		struct switchdev_notifier_port_attr_info *port_attr_info)
+				    struct switchdev_notifier_port_attr_info
+				    *port_attr_info)
 {
 	int err;
 
@@ -1277,7 +1278,8 @@ static int port_switchdev_event(struct notifier_block *unused,
 
 static int
 ethsw_switchdev_port_obj_event(unsigned long event, struct net_device *netdev,
-			struct switchdev_notifier_port_obj_info *port_obj_info)
+			       struct switchdev_notifier_port_obj_info
+			       *port_obj_info)
 {
 	int err = -EOPNOTSUPP;
 
diff --git a/drivers/staging/gasket/gasket_page_table.c b/drivers/staging/gasket/gasket_page_table.c
index f6d715787da8..f3dbe0fe2a67 100644
--- a/drivers/staging/gasket/gasket_page_table.c
+++ b/drivers/staging/gasket/gasket_page_table.c
@@ -898,7 +898,7 @@ static int gasket_alloc_extended_subtable(struct gasket_page_table *pg_tbl,
  *
  * Note that memory for second level page tables is allocated as needed, but
  * that memory is only freed on the final close	of the device file, when the
- * page tables are repartitioned, or the the device is removed.  If there is an
+ * page tables are repartitioned, or the device is removed.  If there is an
  * error or if the full range of slots is not available, any memory
  * allocated for second level page tables remains allocated until final close,
  * repartition, or device removal.
diff --git a/drivers/staging/gasket/gasket_sysfs.c b/drivers/staging/gasket/gasket_sysfs.c
index 5f0e089573a2..af26bc9f184a 100644
--- a/drivers/staging/gasket/gasket_sysfs.c
+++ b/drivers/staging/gasket/gasket_sysfs.c
@@ -339,6 +339,7 @@ void gasket_sysfs_put_attr(struct device *device,
 
 	dev_err(device, "Unable to put unknown attribute: %s\n",
 		attr->attr.attr.name);
+	put_mapping(mapping);
 }
 EXPORT_SYMBOL(gasket_sysfs_put_attr);
 
@@ -372,6 +373,7 @@ ssize_t gasket_sysfs_register_store(struct device *device,
 	gasket_dev = mapping->gasket_dev;
 	if (!gasket_dev) {
 		dev_err(device, "Device driver may have been removed\n");
+		put_mapping(mapping);
 		return 0;
 	}
 
diff --git a/drivers/staging/gdm724x/gdm_lte.c b/drivers/staging/gdm724x/gdm_lte.c
index 354727f0a1fc..eb309190f5be 100644
--- a/drivers/staging/gdm724x/gdm_lte.c
+++ b/drivers/staging/gdm724x/gdm_lte.c
@@ -172,7 +172,7 @@ static int gdm_lte_emulate_arp(struct sk_buff *skb_in, u32 nic_type)
 
 static __sum16 icmp6_checksum(struct ipv6hdr *ipv6, u16 *ptr, int len)
 {
-	unsigned short *w = ptr;
+	unsigned short *w;
 	__wsum sum = 0;
 	int i;
 	u16 pa;
diff --git a/drivers/staging/greybus/hid.c b/drivers/staging/greybus/hid.c
index 04bfd9110502..ed706f39e87a 100644
--- a/drivers/staging/greybus/hid.c
+++ b/drivers/staging/greybus/hid.c
@@ -290,9 +290,8 @@ static int gb_hid_parse(struct hid_device *hid)
 	}
 
 	rdesc = kzalloc(rsize, GFP_KERNEL);
-	if (!rdesc) {
+	if (!rdesc)
 		return -ENOMEM;
-	}
 
 	ret = gb_hid_get_report_desc(ghid, rdesc);
 	if (ret) {
diff --git a/drivers/staging/greybus/light.c b/drivers/staging/greybus/light.c
index d6ba25f21d80..d2672b65c3f4 100644
--- a/drivers/staging/greybus/light.c
+++ b/drivers/staging/greybus/light.c
@@ -1026,7 +1026,8 @@ static int gb_lights_light_config(struct gb_lights *glights, u8 id)
 
 	light->channels_count = conf.channel_count;
 	light->name = kstrndup(conf.name, NAMES_MAX, GFP_KERNEL);
-
+	if (!light->name)
+		return -ENOMEM;
 	light->channels = kcalloc(light->channels_count,
 				  sizeof(struct gb_channel), GFP_KERNEL);
 	if (!light->channels)
diff --git a/drivers/staging/greybus/sdio.c b/drivers/staging/greybus/sdio.c
index 68c5718be827..c4b16bb5c1a4 100644
--- a/drivers/staging/greybus/sdio.c
+++ b/drivers/staging/greybus/sdio.c
@@ -411,6 +411,7 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 	struct gb_sdio_command_request request = {0};
 	struct gb_sdio_command_response response;
 	struct mmc_data *data = host->mrq->data;
+	unsigned int timeout_ms;
 	u8 cmd_flags;
 	u8 cmd_type;
 	int i;
@@ -469,9 +470,12 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 		request.data_blksz = cpu_to_le16(data->blksz);
 	}
 
-	ret = gb_operation_sync(host->connection, GB_SDIO_TYPE_COMMAND,
-				&request, sizeof(request), &response,
-				sizeof(response));
+	timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+		GB_OPERATION_TIMEOUT_DEFAULT;
+
+	ret = gb_operation_sync_timeout(host->connection, GB_SDIO_TYPE_COMMAND,
+					&request, sizeof(request), &response,
+					sizeof(response), timeout_ms);
 	if (ret < 0)
 		goto out;
 
diff --git a/drivers/staging/iio/Documentation/overview.txt b/drivers/staging/iio/Documentation/overview.txt
index 43f92b06bc3e..ebdc64f451d7 100644
--- a/drivers/staging/iio/Documentation/overview.txt
+++ b/drivers/staging/iio/Documentation/overview.txt
@@ -34,7 +34,7 @@ turned on or off (if possible) via sysfs interfaces.
 fifo / ring buffers on the sensor chip.  These greatly reduce the load
 on the host CPU by buffering relatively large numbers of data samples
 based on an internal sampling clock. Examples include VTI SCA3000
-series and Analog Device ADXL345 accelerometers.  Each buffer supports
+series and Analog Devices ADXL345 accelerometers.  Each buffer supports
 polling to establish when data is available.
 
 * Trigger and software buffer support. In many data analysis
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index e59a846bc909..c6b4fb5d48b4 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -30,6 +30,8 @@ source "drivers/staging/media/meson/vdec/Kconfig"
 
 source "drivers/staging/media/omap4iss/Kconfig"
 
+source "drivers/staging/media/rkvdec/Kconfig"
+
 source "drivers/staging/media/sunxi/Kconfig"
 
 source "drivers/staging/media/tegra-vde/Kconfig"
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index 23c682461b62..8b24be1a7076 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_VIDEO_ALLEGRO_DVT)	+= allegro-dvt/
 obj-$(CONFIG_VIDEO_IMX_MEDIA)	+= imx/
 obj-$(CONFIG_VIDEO_MESON_VDEC)	+= meson/vdec/
 obj-$(CONFIG_VIDEO_OMAP4)	+= omap4iss/
+obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC)	+= rkvdec/
 obj-$(CONFIG_VIDEO_SUNXI)	+= sunxi/
 obj-$(CONFIG_TEGRA_VDE)		+= tegra-vde/
 obj-$(CONFIG_VIDEO_HANTRO)	+= hantro/
diff --git a/drivers/staging/media/hantro/Kconfig b/drivers/staging/media/hantro/Kconfig
index 99aed9a5b0b9..5b6cf9f62b1a 100644
--- a/drivers/staging/media/hantro/Kconfig
+++ b/drivers/staging/media/hantro/Kconfig
@@ -2,11 +2,13 @@
 config VIDEO_HANTRO
 	tristate "Hantro VPU driver"
 	depends on ARCH_MXC || ARCH_ROCKCHIP || COMPILE_TEST
-	depends on VIDEO_DEV && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on MEDIA_CONTROLLER_REQUEST_API
+	depends on VIDEO_DEV && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select MEDIA_CONTROLLER_REQUEST_API
 	select VIDEOBUF2_DMA_CONTIG
 	select VIDEOBUF2_VMALLOC
 	select V4L2_MEM2MEM_DEV
+	select V4L2_H264
 	help
 	  Support for the Hantro IP based Video Processing Units present on
 	  Rockchip and NXP i.MX8M SoCs, which accelerate video and image
diff --git a/drivers/staging/media/hantro/Makefile b/drivers/staging/media/hantro/Makefile
index 68c29a9c4946..743ce08eb184 100644
--- a/drivers/staging/media/hantro/Makefile
+++ b/drivers/staging/media/hantro/Makefile
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
 obj-$(CONFIG_VIDEO_HANTRO) += hantro-vpu.o
 
 hantro-vpu-y += \
diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h
index 327ddef45345..3005207fc6fb 100644
--- a/drivers/staging/media/hantro/hantro.h
+++ b/drivers/staging/media/hantro/hantro.h
@@ -26,10 +26,6 @@
 
 #include "hantro_hw.h"
 
-#define MB_DIM			16
-#define MB_WIDTH(w)		DIV_ROUND_UP(w, MB_DIM)
-#define MB_HEIGHT(h)		DIV_ROUND_UP(h, MB_DIM)
-
 struct hantro_ctx;
 struct hantro_codec_ops;
 
@@ -421,7 +417,8 @@ hantro_get_dst_buf(struct hantro_ctx *ctx)
 }
 
 static inline bool
-hantro_needs_postproc(struct hantro_ctx *ctx, const struct hantro_fmt *fmt)
+hantro_needs_postproc(const struct hantro_ctx *ctx,
+		      const struct hantro_fmt *fmt)
 {
 	return !hantro_is_encoder_ctx(ctx) && fmt->fourcc != V4L2_PIX_FMT_NV12;
 }
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index ace13973e2d0..0db8ad455160 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -80,15 +80,6 @@ hantro_enc_buf_finish(struct hantro_ctx *ctx, struct vb2_buffer *buf,
 	return 0;
 }
 
-static int
-hantro_dec_buf_finish(struct hantro_ctx *ctx, struct vb2_buffer *buf,
-		      unsigned int bytesused)
-{
-	/* For decoders set bytesused as per the output picture. */
-	buf->planes[0].bytesused = ctx->dst_fmt.plane_fmt[0].sizeimage;
-	return 0;
-}
-
 static void hantro_job_finish(struct hantro_dev *vpu,
 			      struct hantro_ctx *ctx,
 			      unsigned int bytesused,
@@ -101,8 +92,8 @@ static void hantro_job_finish(struct hantro_dev *vpu,
 	pm_runtime_put_autosuspend(vpu->dev);
 	clk_bulk_disable(vpu->variant->num_clocks, vpu->clocks);
 
-	src = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
-	dst = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+	src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+	dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
 
 	if (WARN_ON(!src))
 		return;
@@ -112,14 +103,14 @@ static void hantro_job_finish(struct hantro_dev *vpu,
 	src->sequence = ctx->sequence_out++;
 	dst->sequence = ctx->sequence_cap++;
 
-	ret = ctx->buf_finish(ctx, &dst->vb2_buf, bytesused);
-	if (ret)
-		result = VB2_BUF_STATE_ERROR;
-
-	v4l2_m2m_buf_done(src, result);
-	v4l2_m2m_buf_done(dst, result);
+	if (ctx->buf_finish) {
+		ret = ctx->buf_finish(ctx, &dst->vb2_buf, bytesused);
+		if (ret)
+			result = VB2_BUF_STATE_ERROR;
+	}
 
-	v4l2_m2m_job_finish(vpu->m2m_dev, ctx->fh.m2m_ctx);
+	v4l2_m2m_buf_done_and_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx,
+					 result);
 }
 
 void hantro_irq_done(struct hantro_dev *vpu, unsigned int bytesused,
@@ -431,7 +422,6 @@ static int hantro_open(struct file *filp)
 		ctx->buf_finish = hantro_enc_buf_finish;
 	} else if (func->id == MEDIA_ENT_F_PROC_VIDEO_DECODER) {
 		allowed_codecs = vpu->variant->codec & HANTRO_DECODERS;
-		ctx->buf_finish = hantro_dec_buf_finish;
 	} else {
 		ret = -ENODEV;
 		goto err_ctx_free;
diff --git a/drivers/staging/media/hantro/hantro_h264.c b/drivers/staging/media/hantro/hantro_h264.c
index f2d3e81fb6ce..d561f125085a 100644
--- a/drivers/staging/media/hantro/hantro_h264.c
+++ b/drivers/staging/media/hantro/hantro_h264.c
@@ -11,7 +11,7 @@
  */
 
 #include <linux/types.h>
-#include <linux/sort.h>
+#include <media/v4l2-h264.h>
 #include <media/v4l2-mem2mem.h>
 
 #include "hantro.h"
@@ -240,229 +240,6 @@ static void prepare_table(struct hantro_ctx *ctx)
 	reorder_scaling_list(ctx);
 }
 
-struct hantro_h264_reflist_builder {
-	const struct v4l2_h264_dpb_entry *dpb;
-	s32 pocs[HANTRO_H264_DPB_SIZE];
-	u8 unordered_reflist[HANTRO_H264_DPB_SIZE];
-	int frame_nums[HANTRO_H264_DPB_SIZE];
-	s32 curpoc;
-	u8 num_valid;
-};
-
-static s32 get_poc(enum v4l2_field field, s32 top_field_order_cnt,
-		   s32 bottom_field_order_cnt)
-{
-	switch (field) {
-	case V4L2_FIELD_TOP:
-		return top_field_order_cnt;
-	case V4L2_FIELD_BOTTOM:
-		return bottom_field_order_cnt;
-	default:
-		break;
-	}
-
-	return min(top_field_order_cnt, bottom_field_order_cnt);
-}
-
-static void
-init_reflist_builder(struct hantro_ctx *ctx,
-		     struct hantro_h264_reflist_builder *b)
-{
-	const struct v4l2_ctrl_h264_slice_params *slice_params;
-	const struct v4l2_ctrl_h264_decode_params *dec_param;
-	const struct v4l2_ctrl_h264_sps *sps;
-	struct vb2_v4l2_buffer *buf = hantro_get_dst_buf(ctx);
-	const struct v4l2_h264_dpb_entry *dpb = ctx->h264_dec.dpb;
-	struct vb2_queue *cap_q = &ctx->fh.m2m_ctx->cap_q_ctx.q;
-	int cur_frame_num, max_frame_num;
-	unsigned int i;
-
-	dec_param = ctx->h264_dec.ctrls.decode;
-	slice_params = &ctx->h264_dec.ctrls.slices[0];
-	sps = ctx->h264_dec.ctrls.sps;
-	max_frame_num = 1 << (sps->log2_max_frame_num_minus4 + 4);
-	cur_frame_num = slice_params->frame_num;
-
-	memset(b, 0, sizeof(*b));
-	b->dpb = dpb;
-	b->curpoc = get_poc(buf->field, dec_param->top_field_order_cnt,
-			    dec_param->bottom_field_order_cnt);
-
-	for (i = 0; i < ARRAY_SIZE(ctx->h264_dec.dpb); i++) {
-		int buf_idx;
-
-		if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE))
-			continue;
-
-		buf_idx = vb2_find_timestamp(cap_q, dpb[i].reference_ts, 0);
-		if (buf_idx < 0)
-			continue;
-
-		buf = to_vb2_v4l2_buffer(vb2_get_buffer(cap_q, buf_idx));
-
-		/*
-		 * Handle frame_num wraparound as described in section
-		 * '8.2.4.1 Decoding process for picture numbers' of the spec.
-		 * TODO: This logic will have to be adjusted when we start
-		 * supporting interlaced content.
-		 */
-		if (dpb[i].frame_num > cur_frame_num)
-			b->frame_nums[i] = (int)dpb[i].frame_num - max_frame_num;
-		else
-			b->frame_nums[i] = dpb[i].frame_num;
-
-		b->pocs[i] = get_poc(buf->field, dpb[i].top_field_order_cnt,
-				     dpb[i].bottom_field_order_cnt);
-		b->unordered_reflist[b->num_valid] = i;
-		b->num_valid++;
-	}
-
-	for (i = b->num_valid; i < ARRAY_SIZE(ctx->h264_dec.dpb); i++)
-		b->unordered_reflist[i] = i;
-}
-
-static int p_ref_list_cmp(const void *ptra, const void *ptrb, const void *data)
-{
-	const struct hantro_h264_reflist_builder *builder = data;
-	const struct v4l2_h264_dpb_entry *a, *b;
-	u8 idxa, idxb;
-
-	idxa = *((u8 *)ptra);
-	idxb = *((u8 *)ptrb);
-	a = &builder->dpb[idxa];
-	b = &builder->dpb[idxb];
-
-	if ((a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM) !=
-	    (b->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)) {
-		/* Short term pics firt. */
-		if (!(a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM))
-			return -1;
-		else
-			return 1;
-	}
-
-	/*
-	 * Short term pics in descending pic num order, long term ones in
-	 * ascending order.
-	 */
-	if (!(a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM))
-		return HANTRO_CMP(builder->frame_nums[idxb],
-				  builder->frame_nums[idxa]);
-
-	return HANTRO_CMP(a->pic_num, b->pic_num);
-}
-
-static int b0_ref_list_cmp(const void *ptra, const void *ptrb, const void *data)
-{
-	const struct hantro_h264_reflist_builder *builder = data;
-	const struct v4l2_h264_dpb_entry *a, *b;
-	s32 poca, pocb;
-	u8 idxa, idxb;
-
-	idxa = *((u8 *)ptra);
-	idxb = *((u8 *)ptrb);
-	a = &builder->dpb[idxa];
-	b = &builder->dpb[idxb];
-
-	if ((a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM) !=
-	    (b->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)) {
-		/* Short term pics firt. */
-		if (!(a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM))
-			return -1;
-		else
-			return 1;
-	}
-
-	/* Long term pics in ascending pic num order. */
-	if (a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)
-		return HANTRO_CMP(a->pic_num, b->pic_num);
-
-	poca = builder->pocs[idxa];
-	pocb = builder->pocs[idxb];
-
-	/*
-	 * Short term pics with POC < cur POC first in POC descending order
-	 * followed by short term pics with POC > cur POC in POC ascending
-	 * order.
-	 */
-	if ((poca < builder->curpoc) != (pocb < builder->curpoc))
-		return HANTRO_CMP(poca, pocb);
-	else if (poca < builder->curpoc)
-		return HANTRO_CMP(pocb, poca);
-
-	return HANTRO_CMP(poca, pocb);
-}
-
-static int b1_ref_list_cmp(const void *ptra, const void *ptrb, const void *data)
-{
-	const struct hantro_h264_reflist_builder *builder = data;
-	const struct v4l2_h264_dpb_entry *a, *b;
-	s32 poca, pocb;
-	u8 idxa, idxb;
-
-	idxa = *((u8 *)ptra);
-	idxb = *((u8 *)ptrb);
-	a = &builder->dpb[idxa];
-	b = &builder->dpb[idxb];
-
-	if ((a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM) !=
-	    (b->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)) {
-		/* Short term pics firt. */
-		if (!(a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM))
-			return -1;
-		else
-			return 1;
-	}
-
-	/* Long term pics in ascending pic num order. */
-	if (a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)
-		return HANTRO_CMP(a->pic_num, b->pic_num);
-
-	poca = builder->pocs[idxa];
-	pocb = builder->pocs[idxb];
-
-	/*
-	 * Short term pics with POC > cur POC first in POC ascending order
-	 * followed by short term pics with POC < cur POC in POC descending
-	 * order.
-	 */
-	if ((poca < builder->curpoc) != (pocb < builder->curpoc))
-		return HANTRO_CMP(pocb, poca);
-	else if (poca < builder->curpoc)
-		return HANTRO_CMP(pocb, poca);
-
-	return HANTRO_CMP(poca, pocb);
-}
-
-static void
-build_p_ref_list(const struct hantro_h264_reflist_builder *builder,
-		 u8 *reflist)
-{
-	memcpy(reflist, builder->unordered_reflist,
-	       sizeof(builder->unordered_reflist));
-	sort_r(reflist, builder->num_valid, sizeof(*reflist),
-	       p_ref_list_cmp, NULL, builder);
-}
-
-static void
-build_b_ref_lists(const struct hantro_h264_reflist_builder *builder,
-		  u8 *b0_reflist, u8 *b1_reflist)
-{
-	memcpy(b0_reflist, builder->unordered_reflist,
-	       sizeof(builder->unordered_reflist));
-	sort_r(b0_reflist, builder->num_valid, sizeof(*b0_reflist),
-	       b0_ref_list_cmp, NULL, builder);
-
-	memcpy(b1_reflist, builder->unordered_reflist,
-	       sizeof(builder->unordered_reflist));
-	sort_r(b1_reflist, builder->num_valid, sizeof(*b1_reflist),
-	       b1_ref_list_cmp, NULL, builder);
-
-	if (builder->num_valid > 1 &&
-	    !memcmp(b1_reflist, b0_reflist, builder->num_valid))
-		swap(b1_reflist[0], b1_reflist[1]);
-}
-
 static bool dpb_entry_match(const struct v4l2_h264_dpb_entry *a,
 			    const struct v4l2_h264_dpb_entry *b)
 {
@@ -560,7 +337,7 @@ int hantro_h264_dec_prepare_run(struct hantro_ctx *ctx)
 {
 	struct hantro_h264_dec_hw_ctx *h264_ctx = &ctx->h264_dec;
 	struct hantro_h264_dec_ctrls *ctrls = &h264_ctx->ctrls;
-	struct hantro_h264_reflist_builder reflist_builder;
+	struct v4l2_h264_reflist_builder reflist_builder;
 
 	hantro_start_prepare_run(ctx);
 
@@ -596,10 +373,12 @@ int hantro_h264_dec_prepare_run(struct hantro_ctx *ctx)
 	prepare_table(ctx);
 
 	/* Build the P/B{0,1} ref lists. */
-	init_reflist_builder(ctx, &reflist_builder);
-	build_p_ref_list(&reflist_builder, h264_ctx->reflists.p);
-	build_b_ref_lists(&reflist_builder, h264_ctx->reflists.b0,
-			  h264_ctx->reflists.b1);
+	v4l2_h264_init_reflist_builder(&reflist_builder, ctrls->decode,
+				       &ctrls->slices[0], ctrls->sps,
+				       ctx->h264_dec.dpb);
+	v4l2_h264_build_p_ref_list(&reflist_builder, h264_ctx->reflists.p);
+	v4l2_h264_build_b_ref_lists(&reflist_builder, h264_ctx->reflists.b0,
+				    h264_ctx->reflists.b1);
 	return 0;
 }
 
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index 7dfc9bad7297..4053d8710e04 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -18,6 +18,10 @@
 
 #define DEC_8190_ALIGN_MASK	0x07U
 
+#define MB_DIM			16
+#define MB_WIDTH(w)		DIV_ROUND_UP(w, MB_DIM)
+#define MB_HEIGHT(h)		DIV_ROUND_UP(h, MB_DIM)
+
 struct hantro_dev;
 struct hantro_ctx;
 struct hantro_buf;
@@ -176,6 +180,33 @@ void hantro_g1_h264_dec_run(struct hantro_ctx *ctx);
 int hantro_h264_dec_init(struct hantro_ctx *ctx);
 void hantro_h264_dec_exit(struct hantro_ctx *ctx);
 
+static inline size_t
+hantro_h264_mv_size(unsigned int width, unsigned int height)
+{
+	/*
+	 * A decoded 8-bit 4:2:0 NV12 frame may need memory for up to
+	 * 448 bytes per macroblock with additional 32 bytes on
+	 * multi-core variants.
+	 *
+	 * The H264 decoder needs extra space on the output buffers
+	 * to store motion vectors. This is needed for reference
+	 * frames and only if the format is non-post-processed NV12.
+	 *
+	 * Memory layout is as follow:
+	 *
+	 * +---------------------------+
+	 * | Y-plane   256 bytes x MBs |
+	 * +---------------------------+
+	 * | UV-plane  128 bytes x MBs |
+	 * +---------------------------+
+	 * | MV buffer  64 bytes x MBs |
+	 * +---------------------------+
+	 * | MC sync          32 bytes |
+	 * +---------------------------+
+	 */
+	return 64 * MB_WIDTH(width) * MB_WIDTH(height) + 32;
+}
+
 void hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx);
 void rk3399_vpu_mpeg2_dec_run(struct hantro_ctx *ctx);
 void hantro_mpeg2_dec_copy_qtable(u8 *qtable,
diff --git a/drivers/staging/media/hantro/hantro_v4l2.c b/drivers/staging/media/hantro/hantro_v4l2.c
index f4ae2cee0f18..f28a94e2fa93 100644
--- a/drivers/staging/media/hantro/hantro_v4l2.c
+++ b/drivers/staging/media/hantro/hantro_v4l2.c
@@ -30,6 +30,11 @@
 #include "hantro_hw.h"
 #include "hantro_v4l2.h"
 
+static int hantro_set_fmt_out(struct hantro_ctx *ctx,
+			      struct v4l2_pix_format_mplane *pix_mp);
+static int hantro_set_fmt_cap(struct hantro_ctx *ctx,
+			      struct v4l2_pix_format_mplane *pix_mp);
+
 static const struct hantro_fmt *
 hantro_get_formats(const struct hantro_ctx *ctx, unsigned int *num_fmts)
 {
@@ -227,12 +232,12 @@ static int vidioc_g_fmt_cap_mplane(struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f,
-			  bool capture)
+static int hantro_try_fmt(const struct hantro_ctx *ctx,
+			  struct v4l2_pix_format_mplane *pix_mp,
+			  enum v4l2_buf_type type)
 {
-	struct hantro_ctx *ctx = fh_to_ctx(priv);
-	struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
 	const struct hantro_fmt *fmt, *vpu_fmt;
+	bool capture = !V4L2_TYPE_IS_OUTPUT(type);
 	bool coded;
 
 	coded = capture == hantro_is_encoder_ctx(ctx);
@@ -246,7 +251,7 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f,
 	fmt = hantro_find_format(ctx, pix_mp->pixelformat);
 	if (!fmt) {
 		fmt = hantro_get_default_fmt(ctx, coded);
-		f->fmt.pix_mp.pixelformat = fmt->fourcc;
+		pix_mp->pixelformat = fmt->fourcc;
 	}
 
 	if (coded) {
@@ -273,32 +278,11 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f,
 		/* Fill remaining fields */
 		v4l2_fill_pixfmt_mp(pix_mp, fmt->fourcc, pix_mp->width,
 				    pix_mp->height);
-		/*
-		 * A decoded 8-bit 4:2:0 NV12 frame may need memory for up to
-		 * 448 bytes per macroblock with additional 32 bytes on
-		 * multi-core variants.
-		 *
-		 * The H264 decoder needs extra space on the output buffers
-		 * to store motion vectors. This is needed for reference
-		 * frames and only if the format is non-post-processed NV12.
-		 *
-		 * Memory layout is as follow:
-		 *
-		 * +---------------------------+
-		 * | Y-plane   256 bytes x MBs |
-		 * +---------------------------+
-		 * | UV-plane  128 bytes x MBs |
-		 * +---------------------------+
-		 * | MV buffer  64 bytes x MBs |
-		 * +---------------------------+
-		 * | MC sync          32 bytes |
-		 * +---------------------------+
-		 */
 		if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE &&
 		    !hantro_needs_postproc(ctx, fmt))
 			pix_mp->plane_fmt[0].sizeimage +=
-				64 * MB_WIDTH(pix_mp->width) *
-				     MB_WIDTH(pix_mp->height) + 32;
+				hantro_h264_mv_size(pix_mp->width,
+						    pix_mp->height);
 	} else if (!pix_mp->plane_fmt[0].sizeimage) {
 		/*
 		 * For coded formats the application can specify
@@ -315,13 +299,13 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f,
 static int vidioc_try_fmt_cap_mplane(struct file *file, void *priv,
 				     struct v4l2_format *f)
 {
-	return vidioc_try_fmt(file, priv, f, true);
+	return hantro_try_fmt(fh_to_ctx(priv), &f->fmt.pix_mp, f->type);
 }
 
 static int vidioc_try_fmt_out_mplane(struct file *file, void *priv,
 				     struct v4l2_format *f)
 {
-	return vidioc_try_fmt(file, priv, f, false);
+	return hantro_try_fmt(fh_to_ctx(priv), &f->fmt.pix_mp, f->type);
 }
 
 static void
@@ -355,11 +339,12 @@ hantro_reset_encoded_fmt(struct hantro_ctx *ctx)
 	}
 
 	hantro_reset_fmt(fmt, vpu_fmt);
-	fmt->num_planes = 1;
 	fmt->width = vpu_fmt->frmsize.min_width;
 	fmt->height = vpu_fmt->frmsize.min_height;
-	fmt->plane_fmt[0].sizeimage = vpu_fmt->header_size +
-				fmt->width * fmt->height * vpu_fmt->max_depth;
+	if (hantro_is_encoder_ctx(ctx))
+		hantro_set_fmt_cap(ctx, fmt);
+	else
+		hantro_set_fmt_out(ctx, fmt);
 }
 
 static void
@@ -381,9 +366,12 @@ hantro_reset_raw_fmt(struct hantro_ctx *ctx)
 	}
 
 	hantro_reset_fmt(raw_fmt, raw_vpu_fmt);
-	v4l2_fill_pixfmt_mp(raw_fmt, raw_vpu_fmt->fourcc,
-			    encoded_fmt->width,
-			    encoded_fmt->height);
+	raw_fmt->width = encoded_fmt->width;
+	raw_fmt->width = encoded_fmt->width;
+	if (hantro_is_encoder_ctx(ctx))
+		hantro_set_fmt_out(ctx, raw_fmt);
+	else
+		hantro_set_fmt_cap(ctx, raw_fmt);
 }
 
 void hantro_reset_fmts(struct hantro_ctx *ctx)
@@ -409,15 +397,15 @@ hantro_update_requires_request(struct hantro_ctx *ctx, u32 fourcc)
 	}
 }
 
-static int
-vidioc_s_fmt_out_mplane(struct file *file, void *priv, struct v4l2_format *f)
+static int hantro_set_fmt_out(struct hantro_ctx *ctx,
+			      struct v4l2_pix_format_mplane *pix_mp)
 {
-	struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
-	struct hantro_ctx *ctx = fh_to_ctx(priv);
-	struct vb2_queue *vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	struct vb2_queue *vq;
 	int ret;
 
-	ret = vidioc_try_fmt_out_mplane(file, priv, f);
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
+			     V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
+	ret = hantro_try_fmt(ctx, pix_mp, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
 	if (ret)
 		return ret;
 
@@ -479,16 +467,15 @@ vidioc_s_fmt_out_mplane(struct file *file, void *priv, struct v4l2_format *f)
 	return 0;
 }
 
-static int vidioc_s_fmt_cap_mplane(struct file *file, void *priv,
-				   struct v4l2_format *f)
+static int hantro_set_fmt_cap(struct hantro_ctx *ctx,
+			      struct v4l2_pix_format_mplane *pix_mp)
 {
-	struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
-	struct hantro_ctx *ctx = fh_to_ctx(priv);
 	struct vb2_queue *vq;
 	int ret;
 
 	/* Change not allowed if queue is busy. */
-	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
+			     V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
 	if (vb2_is_busy(vq))
 		return -EBUSY;
 
@@ -509,7 +496,7 @@ static int vidioc_s_fmt_cap_mplane(struct file *file, void *priv,
 			return -EBUSY;
 	}
 
-	ret = vidioc_try_fmt_cap_mplane(file, priv, f);
+	ret = hantro_try_fmt(ctx, pix_mp, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
 	if (ret)
 		return ret;
 
@@ -543,6 +530,18 @@ static int vidioc_s_fmt_cap_mplane(struct file *file, void *priv,
 	return 0;
 }
 
+static int
+vidioc_s_fmt_out_mplane(struct file *file, void *priv, struct v4l2_format *f)
+{
+	return hantro_set_fmt_out(fh_to_ctx(priv), &f->fmt.pix_mp);
+}
+
+static int
+vidioc_s_fmt_cap_mplane(struct file *file, void *priv, struct v4l2_format *f)
+{
+	return hantro_set_fmt_cap(fh_to_ctx(priv), &f->fmt.pix_mp);
+}
+
 const struct v4l2_ioctl_ops hantro_ioctl_ops = {
 	.vidioc_querycap = vidioc_querycap,
 	.vidioc_enum_framesizes = vidioc_enum_framesizes,
@@ -608,7 +607,7 @@ hantro_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
 }
 
 static int
-hantro_buf_plane_check(struct vb2_buffer *vb, const struct hantro_fmt *vpu_fmt,
+hantro_buf_plane_check(struct vb2_buffer *vb,
 		       struct v4l2_pix_format_mplane *pixfmt)
 {
 	unsigned int sz;
@@ -630,12 +629,18 @@ static int hantro_buf_prepare(struct vb2_buffer *vb)
 {
 	struct vb2_queue *vq = vb->vb2_queue;
 	struct hantro_ctx *ctx = vb2_get_drv_priv(vq);
+	struct v4l2_pix_format_mplane *pix_fmt;
+	int ret;
 
 	if (V4L2_TYPE_IS_OUTPUT(vq->type))
-		return hantro_buf_plane_check(vb, ctx->vpu_src_fmt,
-						  &ctx->src_fmt);
-
-	return hantro_buf_plane_check(vb, ctx->vpu_dst_fmt, &ctx->dst_fmt);
+		pix_fmt = &ctx->src_fmt;
+	else
+		pix_fmt = &ctx->dst_fmt;
+	ret = hantro_buf_plane_check(vb, pix_fmt);
+	if (ret)
+		return ret;
+	vb2_set_plane_payload(vb, 0, pix_fmt->plane_fmt[0].sizeimage);
+	return 0;
 }
 
 static void hantro_buf_queue(struct vb2_buffer *vb)
diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig
index 8f1ae50a4abd..f555aac8a9d5 100644
--- a/drivers/staging/media/imx/Kconfig
+++ b/drivers/staging/media/imx/Kconfig
@@ -2,8 +2,9 @@
 config VIDEO_IMX_MEDIA
 	tristate "i.MX5/6 V4L2 media core driver"
 	depends on ARCH_MXC || COMPILE_TEST
-	depends on MEDIA_CONTROLLER && VIDEO_V4L2 && IMX_IPUV3_CORE
-	depends on VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && IMX_IPUV3_CORE
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	depends on HAS_DMA
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_FWNODE
diff --git a/drivers/staging/media/imx/imx-ic-prp.c b/drivers/staging/media/imx/imx-ic-prp.c
index 2a4f77e83ed3..7658b83466a7 100644
--- a/drivers/staging/media/imx/imx-ic-prp.c
+++ b/drivers/staging/media/imx/imx-ic-prp.c
@@ -106,8 +106,8 @@ static int prp_enum_mbus_code(struct v4l2_subdev *sd,
 
 	switch (code->pad) {
 	case PRP_SINK_PAD:
-		ret = imx_media_enum_ipu_format(&code->code, code->index,
-						CS_SEL_ANY);
+		ret = imx_media_enum_ipu_formats(&code->code, code->index,
+						 PIXFMT_SEL_YUV_RGB);
 		break;
 	case PRP_SRC_PAD_PRPENC:
 	case PRP_SRC_PAD_PRPVF:
@@ -180,10 +180,12 @@ static int prp_set_fmt(struct v4l2_subdev *sd,
 				      MIN_H, MAX_H, H_ALIGN, S_ALIGN);
 
 		cc = imx_media_find_ipu_format(sdformat->format.code,
-					       CS_SEL_ANY);
+					       PIXFMT_SEL_YUV_RGB);
 		if (!cc) {
-			imx_media_enum_ipu_format(&code, 0, CS_SEL_ANY);
-			cc = imx_media_find_ipu_format(code, CS_SEL_ANY);
+			imx_media_enum_ipu_formats(&code, 0,
+						   PIXFMT_SEL_YUV_RGB);
+			cc = imx_media_find_ipu_format(code,
+						       PIXFMT_SEL_YUV_RGB);
 			sdformat->format.code = cc->codes[0];
 		}
 
@@ -438,7 +440,8 @@ static int prp_registered(struct v4l2_subdev *sd)
 	priv->frame_interval.denominator = 30;
 
 	/* set a default mbus format  */
-	imx_media_enum_ipu_format(&code, 0, CS_SEL_YUV);
+	imx_media_enum_ipu_formats(&code, 0, PIXFMT_SEL_YUV);
+
 	return imx_media_init_mbus_fmt(&priv->format_mbus, 640, 480, code,
 				       V4L2_FIELD_NONE, NULL);
 }
diff --git a/drivers/staging/media/imx/imx-ic-prpencvf.c b/drivers/staging/media/imx/imx-ic-prpencvf.c
index 09c4e3f33807..b1f84e0ac486 100644
--- a/drivers/staging/media/imx/imx-ic-prpencvf.c
+++ b/drivers/staging/media/imx/imx-ic-prpencvf.c
@@ -850,7 +850,8 @@ static int prp_enum_mbus_code(struct v4l2_subdev *sd,
 	if (code->pad >= PRPENCVF_NUM_PADS)
 		return -EINVAL;
 
-	return imx_media_enum_ipu_format(&code->code, code->index, CS_SEL_ANY);
+	return imx_media_enum_ipu_formats(&code->code, code->index,
+					  PIXFMT_SEL_YUV_RGB);
 }
 
 static int prp_get_fmt(struct v4l2_subdev *sd,
@@ -885,12 +886,14 @@ static void prp_try_fmt(struct prp_priv *priv,
 {
 	struct v4l2_mbus_framefmt *infmt;
 
-	*cc = imx_media_find_ipu_format(sdformat->format.code, CS_SEL_ANY);
+	*cc = imx_media_find_ipu_format(sdformat->format.code,
+					PIXFMT_SEL_YUV_RGB);
 	if (!*cc) {
 		u32 code;
 
-		imx_media_enum_ipu_format(&code, 0, CS_SEL_ANY);
-		*cc = imx_media_find_ipu_format(code, CS_SEL_ANY);
+		imx_media_enum_ipu_formats(&code, 0, PIXFMT_SEL_YUV_RGB);
+		*cc = imx_media_find_ipu_format(code, PIXFMT_SEL_YUV_RGB);
+
 		sdformat->format.code = (*cc)->codes[0];
 	}
 
@@ -1248,7 +1251,8 @@ static int prp_registered(struct v4l2_subdev *sd)
 	u32 code;
 
 	/* set a default mbus format  */
-	imx_media_enum_ipu_format(&code, 0, CS_SEL_YUV);
+	imx_media_enum_ipu_formats(&code, 0, PIXFMT_SEL_YUV);
+
 	for (i = 0; i < PRPENCVF_NUM_PADS; i++) {
 		ret = imx_media_init_mbus_fmt(&priv->format_mbus[i],
 					      640, 480, code, V4L2_FIELD_NONE,
diff --git a/drivers/staging/media/imx/imx-media-capture.c b/drivers/staging/media/imx/imx-media-capture.c
index d37b776ff86d..c1931eb2540e 100644
--- a/drivers/staging/media/imx/imx-media-capture.c
+++ b/drivers/staging/media/imx/imx-media-capture.c
@@ -91,11 +91,11 @@ static int capture_enum_framesizes(struct file *file, void *fh,
 	};
 	int ret;
 
-	cc = imx_media_find_format(fsize->pixel_format, CS_SEL_ANY, true);
+	cc = imx_media_find_pixel_format(fsize->pixel_format, PIXFMT_SEL_ANY);
 	if (!cc)
 		return -EINVAL;
 
-	fse.code = cc->codes[0];
+	fse.code = cc->codes ? cc->codes[0] : 0;
 
 	ret = v4l2_subdev_call(priv->src_sd, pad, enum_frame_size, NULL, &fse);
 	if (ret)
@@ -133,11 +133,11 @@ static int capture_enum_frameintervals(struct file *file, void *fh,
 	};
 	int ret;
 
-	cc = imx_media_find_format(fival->pixel_format, CS_SEL_ANY, true);
+	cc = imx_media_find_pixel_format(fival->pixel_format, PIXFMT_SEL_ANY);
 	if (!cc)
 		return -EINVAL;
 
-	fie.code = cc->codes[0];
+	fie.code = cc->codes ? cc->codes[0] : 0;
 
 	ret = v4l2_subdev_call(priv->src_sd, pad, enum_frame_interval,
 			       NULL, &fie);
@@ -167,17 +167,19 @@ static int capture_enum_fmt_vid_cap(struct file *file, void *fh,
 		return ret;
 	}
 
-	cc_src = imx_media_find_ipu_format(fmt_src.format.code, CS_SEL_ANY);
+	cc_src = imx_media_find_ipu_format(fmt_src.format.code,
+					   PIXFMT_SEL_YUV_RGB);
 	if (cc_src) {
-		u32 cs_sel = (cc_src->cs == IPUV3_COLORSPACE_YUV) ?
-			CS_SEL_YUV : CS_SEL_RGB;
+		enum imx_pixfmt_sel fmt_sel =
+			(cc_src->cs == IPUV3_COLORSPACE_YUV) ?
+			PIXFMT_SEL_YUV : PIXFMT_SEL_RGB;
 
-		ret = imx_media_enum_format(&fourcc, f->index, cs_sel);
+		ret = imx_media_enum_pixel_formats(&fourcc, f->index, fmt_sel);
 		if (ret)
 			return ret;
 	} else {
 		cc_src = imx_media_find_mbus_format(fmt_src.format.code,
-						    CS_SEL_ANY, true);
+						    PIXFMT_SEL_ANY);
 		if (WARN_ON(!cc_src))
 			return -EINVAL;
 
@@ -209,22 +211,24 @@ static int __capture_try_fmt_vid_cap(struct capture_priv *priv,
 {
 	const struct imx_media_pixfmt *cc, *cc_src;
 
-	cc_src = imx_media_find_ipu_format(fmt_src->format.code, CS_SEL_ANY);
+	cc_src = imx_media_find_ipu_format(fmt_src->format.code,
+					   PIXFMT_SEL_YUV_RGB);
 	if (cc_src) {
-		u32 fourcc, cs_sel;
+		enum imx_pixfmt_sel fmt_sel;
+		u32 fourcc;
 
-		cs_sel = (cc_src->cs == IPUV3_COLORSPACE_YUV) ?
-			CS_SEL_YUV : CS_SEL_RGB;
+		fmt_sel = (cc_src->cs == IPUV3_COLORSPACE_YUV) ?
+			PIXFMT_SEL_YUV : PIXFMT_SEL_RGB;
 		fourcc = f->fmt.pix.pixelformat;
 
-		cc = imx_media_find_format(fourcc, cs_sel, false);
+		cc = imx_media_find_pixel_format(fourcc, fmt_sel);
 		if (!cc) {
-			imx_media_enum_format(&fourcc, 0, cs_sel);
-			cc = imx_media_find_format(fourcc, cs_sel, false);
+			imx_media_enum_pixel_formats(&fourcc, 0, fmt_sel);
+			cc = imx_media_find_pixel_format(fourcc, fmt_sel);
 		}
 	} else {
 		cc_src = imx_media_find_mbus_format(fmt_src->format.code,
-						    CS_SEL_ANY, true);
+						    PIXFMT_SEL_ANY);
 		if (WARN_ON(!cc_src))
 			return -EINVAL;
 
@@ -789,8 +793,8 @@ int imx_media_capture_device_register(struct imx_media_video_dev *vdev)
 				      &fmt_src.format, NULL);
 	vdev->compose.width = fmt_src.format.width;
 	vdev->compose.height = fmt_src.format.height;
-	vdev->cc = imx_media_find_format(vdev->fmt.fmt.pix.pixelformat,
-					 CS_SEL_ANY, false);
+	vdev->cc = imx_media_find_pixel_format(vdev->fmt.fmt.pix.pixelformat,
+					       PIXFMT_SEL_ANY);
 
 	v4l2_info(sd, "Registered %s as /dev/%s\n", vfd->name,
 		  video_device_node_name(vfd));
diff --git a/drivers/staging/media/imx/imx-media-csc-scaler.c b/drivers/staging/media/imx/imx-media-csc-scaler.c
index 2cc77f6e84b6..fab1155a5958 100644
--- a/drivers/staging/media/imx/imx-media-csc-scaler.c
+++ b/drivers/staging/media/imx/imx-media-csc-scaler.c
@@ -25,6 +25,8 @@
 
 #define fh_to_ctx(__fh)	container_of(__fh, struct ipu_csc_scaler_ctx, fh)
 
+#define IMX_CSC_SCALER_NAME "imx-csc-scaler"
+
 enum {
 	V4L2_M2M_SRC = 0,
 	V4L2_M2M_DST = 1,
@@ -150,10 +152,10 @@ static void device_run(void *_ctx)
 static int ipu_csc_scaler_querycap(struct file *file, void *priv,
 				   struct v4l2_capability *cap)
 {
-	strscpy(cap->driver, "imx-media-csc-scaler", sizeof(cap->driver));
-	strscpy(cap->card, "imx-media-csc-scaler", sizeof(cap->card));
-	strscpy(cap->bus_info, "platform:imx-media-csc-scaler",
-		sizeof(cap->bus_info));
+	strscpy(cap->driver, IMX_CSC_SCALER_NAME, sizeof(cap->driver));
+	strscpy(cap->card, IMX_CSC_SCALER_NAME, sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info),
+		 "platform:%s", IMX_CSC_SCALER_NAME);
 
 	return 0;
 }
@@ -164,7 +166,8 @@ static int ipu_csc_scaler_enum_fmt(struct file *file, void *fh,
 	u32 fourcc;
 	int ret;
 
-	ret = imx_media_enum_format(&fourcc, f->index, CS_SEL_ANY);
+	ret = imx_media_enum_pixel_formats(&fourcc, f->index,
+					   PIXFMT_SEL_YUV_RGB);
 	if (ret)
 		return ret;
 
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index e76a6a85baa3..66468326bcbc 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -1234,12 +1234,12 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
 	mutex_lock(&priv->lock);
 
 	infmt = __csi_get_fmt(priv, cfg, CSI_SINK_PAD, code->which);
-	incc = imx_media_find_mbus_format(infmt->code, CS_SEL_ANY, true);
+	incc = imx_media_find_mbus_format(infmt->code, PIXFMT_SEL_ANY);
 
 	switch (code->pad) {
 	case CSI_SINK_PAD:
-		ret = imx_media_enum_mbus_format(&code->code, code->index,
-						 CS_SEL_ANY, true);
+		ret = imx_media_enum_mbus_formats(&code->code, code->index,
+						  PIXFMT_SEL_ANY);
 		break;
 	case CSI_SRC_PAD_DIRECT:
 	case CSI_SRC_PAD_IDMAC:
@@ -1256,11 +1256,13 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
 			}
 			code->code = infmt->code;
 		} else {
-			u32 cs_sel = (incc->cs == IPUV3_COLORSPACE_YUV) ?
-				CS_SEL_YUV : CS_SEL_RGB;
-			ret = imx_media_enum_ipu_format(&code->code,
-							code->index,
-							cs_sel);
+			enum imx_pixfmt_sel fmt_sel =
+				(incc->cs == IPUV3_COLORSPACE_YUV) ?
+				PIXFMT_SEL_YUV : PIXFMT_SEL_RGB;
+
+			ret = imx_media_enum_ipu_formats(&code->code,
+							 code->index,
+							 fmt_sel);
 		}
 		break;
 	default:
@@ -1433,8 +1435,7 @@ static void csi_try_fmt(struct csi_priv *priv,
 	switch (sdformat->pad) {
 	case CSI_SRC_PAD_DIRECT:
 	case CSI_SRC_PAD_IDMAC:
-		incc = imx_media_find_mbus_format(infmt->code,
-						  CS_SEL_ANY, true);
+		incc = imx_media_find_mbus_format(infmt->code, PIXFMT_SEL_ANY);
 
 		sdformat->format.width = compose->width;
 		sdformat->format.height = compose->height;
@@ -1443,14 +1444,15 @@ static void csi_try_fmt(struct csi_priv *priv,
 			sdformat->format.code = infmt->code;
 			*cc = incc;
 		} else {
-			u32 cs_sel = (incc->cs == IPUV3_COLORSPACE_YUV) ?
-				CS_SEL_YUV : CS_SEL_RGB;
+			enum imx_pixfmt_sel fmt_sel =
+				(incc->cs == IPUV3_COLORSPACE_YUV) ?
+				PIXFMT_SEL_YUV : PIXFMT_SEL_RGB;
 
 			*cc = imx_media_find_ipu_format(sdformat->format.code,
-							cs_sel);
+							fmt_sel);
 			if (!*cc) {
-				imx_media_enum_ipu_format(&code, 0, cs_sel);
-				*cc = imx_media_find_ipu_format(code, cs_sel);
+				imx_media_enum_ipu_formats(&code, 0, fmt_sel);
+				*cc = imx_media_find_ipu_format(code, fmt_sel);
 				sdformat->format.code = (*cc)->codes[0];
 			}
 		}
@@ -1470,12 +1472,12 @@ static void csi_try_fmt(struct csi_priv *priv,
 				      MIN_H, MAX_H, H_ALIGN, S_ALIGN);
 
 		*cc = imx_media_find_mbus_format(sdformat->format.code,
-						 CS_SEL_ANY, true);
+						 PIXFMT_SEL_ANY);
 		if (!*cc) {
-			imx_media_enum_mbus_format(&code, 0,
-						   CS_SEL_ANY, false);
+			imx_media_enum_mbus_formats(&code, 0,
+						    PIXFMT_SEL_YUV_RGB);
 			*cc = imx_media_find_mbus_format(code,
-							 CS_SEL_ANY, false);
+							 PIXFMT_SEL_YUV_RGB);
 			sdformat->format.code = (*cc)->codes[0];
 		}
 
@@ -1761,7 +1763,7 @@ static int csi_registered(struct v4l2_subdev *sd)
 	for (i = 0; i < CSI_NUM_PADS; i++) {
 		code = 0;
 		if (i != CSI_SINK_PAD)
-			imx_media_enum_ipu_format(&code, 0, CS_SEL_YUV);
+			imx_media_enum_ipu_formats(&code, 0, PIXFMT_SEL_YUV);
 
 		/* set a default mbus format  */
 		ret = imx_media_init_mbus_fmt(&priv->format_mbus[i],
diff --git a/drivers/staging/media/imx/imx-media-utils.c b/drivers/staging/media/imx/imx-media-utils.c
index fae981698c49..42e64b618a61 100644
--- a/drivers/staging/media/imx/imx-media-utils.c
+++ b/drivers/staging/media/imx/imx-media-utils.c
@@ -7,36 +7,30 @@
 #include <linux/module.h>
 #include "imx-media.h"
 
+#define IMX_BUS_FMTS(fmt...) (const u32[]) {fmt, 0}
+
 /*
  * List of supported pixel formats for the subdevs.
- *
- * In all of these tables, the non-mbus formats (with no
- * mbus codes) must all fall at the end of the table.
  */
-
-static const struct imx_media_pixfmt yuv_formats[] = {
+static const struct imx_media_pixfmt pixel_formats[] = {
+	/*** YUV formats start here ***/
 	{
 		.fourcc	= V4L2_PIX_FMT_UYVY,
-		.codes  = {
+		.codes  = IMX_BUS_FMTS(
 			MEDIA_BUS_FMT_UYVY8_2X8,
 			MEDIA_BUS_FMT_UYVY8_1X16
-		},
+		),
 		.cs     = IPUV3_COLORSPACE_YUV,
 		.bpp    = 16,
 	}, {
 		.fourcc	= V4L2_PIX_FMT_YUYV,
-		.codes  = {
+		.codes  = IMX_BUS_FMTS(
 			MEDIA_BUS_FMT_YUYV8_2X8,
 			MEDIA_BUS_FMT_YUYV8_1X16
-		},
+		),
 		.cs     = IPUV3_COLORSPACE_YUV,
 		.bpp    = 16,
-	},
-	/***
-	 * non-mbus YUV formats start here. NOTE! when adding non-mbus
-	 * formats, NUM_NON_MBUS_YUV_FORMATS must be updated below.
-	 ***/
-	{
+	}, {
 		.fourcc	= V4L2_PIX_FMT_YUV420,
 		.cs     = IPUV3_COLORSPACE_YUV,
 		.bpp    = 12,
@@ -61,213 +55,212 @@ static const struct imx_media_pixfmt yuv_formats[] = {
 		.cs     = IPUV3_COLORSPACE_YUV,
 		.bpp    = 16,
 		.planar = true,
+	}, {
+		.fourcc = V4L2_PIX_FMT_YUV32,
+		.codes  = IMX_BUS_FMTS(MEDIA_BUS_FMT_AYUV8_1X32),
+		.cs     = IPUV3_COLORSPACE_YUV,
+		.bpp    = 32,
+		.ipufmt = true,
 	},
-};
-
-#define NUM_NON_MBUS_YUV_FORMATS 5
-#define NUM_YUV_FORMATS ARRAY_SIZE(yuv_formats)
-#define NUM_MBUS_YUV_FORMATS (NUM_YUV_FORMATS - NUM_NON_MBUS_YUV_FORMATS)
-
-static const struct imx_media_pixfmt rgb_formats[] = {
+	/*** RGB formats start here ***/
 	{
 		.fourcc	= V4L2_PIX_FMT_RGB565,
-		.codes  = {MEDIA_BUS_FMT_RGB565_2X8_LE},
+		.codes  = IMX_BUS_FMTS(MEDIA_BUS_FMT_RGB565_2X8_LE),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 16,
 		.cycles = 2,
 	}, {
 		.fourcc	= V4L2_PIX_FMT_RGB24,
-		.codes  = {
+		.codes  = IMX_BUS_FMTS(
 			MEDIA_BUS_FMT_RGB888_1X24,
 			MEDIA_BUS_FMT_RGB888_2X12_LE
-		},
+		),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 24,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_BGR24,
+		.cs     = IPUV3_COLORSPACE_RGB,
+		.bpp    = 24,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_XRGB32,
+		.codes  = IMX_BUS_FMTS(MEDIA_BUS_FMT_ARGB8888_1X32),
+		.cs     = IPUV3_COLORSPACE_RGB,
+		.bpp    = 32,
 	}, {
 		.fourcc	= V4L2_PIX_FMT_XRGB32,
-		.codes  = {MEDIA_BUS_FMT_ARGB8888_1X32},
+		.codes  = IMX_BUS_FMTS(MEDIA_BUS_FMT_ARGB8888_1X32),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 32,
 		.ipufmt = true,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_XBGR32,
+		.cs     = IPUV3_COLORSPACE_RGB,
+		.bpp    = 32,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_BGRX32,
+		.cs     = IPUV3_COLORSPACE_RGB,
+		.bpp    = 32,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_RGBX32,
+		.cs     = IPUV3_COLORSPACE_RGB,
+		.bpp    = 32,
 	},
 	/*** raw bayer and grayscale formats start here ***/
 	{
 		.fourcc = V4L2_PIX_FMT_SBGGR8,
-		.codes  = {MEDIA_BUS_FMT_SBGGR8_1X8},
+		.codes  = IMX_BUS_FMTS(MEDIA_BUS_FMT_SBGGR8_1X8),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 8,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGBRG8,
-		.codes  = {MEDIA_BUS_FMT_SGBRG8_1X8},
+		.codes  = IMX_BUS_FMTS(MEDIA_BUS_FMT_SGBRG8_1X8),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 8,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGRBG8,
-		.codes  = {MEDIA_BUS_FMT_SGRBG8_1X8},
+		.codes  = IMX_BUS_FMTS(MEDIA_BUS_FMT_SGRBG8_1X8),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 8,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SRGGB8,
-		.codes  = {MEDIA_BUS_FMT_SRGGB8_1X8},
+		.codes  = IMX_BUS_FMTS(MEDIA_BUS_FMT_SRGGB8_1X8),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 8,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SBGGR16,
-		.codes  = {
+		.codes  = IMX_BUS_FMTS(
 			MEDIA_BUS_FMT_SBGGR10_1X10,
 			MEDIA_BUS_FMT_SBGGR12_1X12,
 			MEDIA_BUS_FMT_SBGGR14_1X14,
 			MEDIA_BUS_FMT_SBGGR16_1X16
-		},
+		),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 16,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGBRG16,
-		.codes  = {
+		.codes  = IMX_BUS_FMTS(
 			MEDIA_BUS_FMT_SGBRG10_1X10,
 			MEDIA_BUS_FMT_SGBRG12_1X12,
 			MEDIA_BUS_FMT_SGBRG14_1X14,
-			MEDIA_BUS_FMT_SGBRG16_1X16,
-		},
+			MEDIA_BUS_FMT_SGBRG16_1X16
+		),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 16,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGRBG16,
-		.codes  = {
+		.codes  = IMX_BUS_FMTS(
 			MEDIA_BUS_FMT_SGRBG10_1X10,
 			MEDIA_BUS_FMT_SGRBG12_1X12,
 			MEDIA_BUS_FMT_SGRBG14_1X14,
-			MEDIA_BUS_FMT_SGRBG16_1X16,
-		},
+			MEDIA_BUS_FMT_SGRBG16_1X16
+		),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 16,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SRGGB16,
-		.codes  = {
+		.codes  = IMX_BUS_FMTS(
 			MEDIA_BUS_FMT_SRGGB10_1X10,
 			MEDIA_BUS_FMT_SRGGB12_1X12,
 			MEDIA_BUS_FMT_SRGGB14_1X14,
-			MEDIA_BUS_FMT_SRGGB16_1X16,
-		},
+			MEDIA_BUS_FMT_SRGGB16_1X16
+		),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 16,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_GREY,
-		.codes = {
+		.codes = IMX_BUS_FMTS(
 			MEDIA_BUS_FMT_Y8_1X8,
 			MEDIA_BUS_FMT_Y10_1X10,
-			MEDIA_BUS_FMT_Y12_1X12,
-		},
+			MEDIA_BUS_FMT_Y12_1X12
+		),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 8,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_Y10,
-		.codes = {MEDIA_BUS_FMT_Y10_1X10},
+		.codes = IMX_BUS_FMTS(MEDIA_BUS_FMT_Y10_1X10),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 16,
 		.bayer  = true,
 	}, {
 		.fourcc = V4L2_PIX_FMT_Y12,
-		.codes = {MEDIA_BUS_FMT_Y12_1X12},
+		.codes = IMX_BUS_FMTS(MEDIA_BUS_FMT_Y12_1X12),
 		.cs     = IPUV3_COLORSPACE_RGB,
 		.bpp    = 16,
 		.bayer  = true,
 	},
-	/***
-	 * non-mbus RGB formats start here. NOTE! when adding non-mbus
-	 * formats, NUM_NON_MBUS_RGB_FORMATS must be updated below.
-	 ***/
-	{
-		.fourcc	= V4L2_PIX_FMT_BGR24,
-		.cs     = IPUV3_COLORSPACE_RGB,
-		.bpp    = 24,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_XBGR32,
-		.cs     = IPUV3_COLORSPACE_RGB,
-		.bpp    = 32,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_BGRX32,
-		.cs     = IPUV3_COLORSPACE_RGB,
-		.bpp    = 32,
-	}, {
-		.fourcc	= V4L2_PIX_FMT_RGBX32,
-		.cs     = IPUV3_COLORSPACE_RGB,
-		.bpp    = 32,
-	},
 };
 
-#define NUM_NON_MBUS_RGB_FORMATS 2
-#define NUM_RGB_FORMATS ARRAY_SIZE(rgb_formats)
-#define NUM_MBUS_RGB_FORMATS (NUM_RGB_FORMATS - NUM_NON_MBUS_RGB_FORMATS)
+/*
+ * Search in the pixel_formats[] array for an entry with the given fourcc
+ * that matches the requested selection criteria and return it.
+ *
+ * @fourcc: Search for an entry with the given fourcc pixel format.
+ * @fmt_sel: Allow entries only with the given selection criteria.
+ */
+const struct imx_media_pixfmt *
+imx_media_find_pixel_format(u32 fourcc, enum imx_pixfmt_sel fmt_sel)
+{
+	bool sel_ipu = fmt_sel & PIXFMT_SEL_IPU;
+	unsigned int i;
 
-static const struct imx_media_pixfmt ipu_yuv_formats[] = {
-	{
-		.fourcc = V4L2_PIX_FMT_YUV32,
-		.codes  = {MEDIA_BUS_FMT_AYUV8_1X32},
-		.cs     = IPUV3_COLORSPACE_YUV,
-		.bpp    = 32,
-		.ipufmt = true,
-	},
-};
+	fmt_sel &= ~PIXFMT_SEL_IPU;
 
-#define NUM_IPU_YUV_FORMATS ARRAY_SIZE(ipu_yuv_formats)
+	for (i = 0; i < ARRAY_SIZE(pixel_formats); i++) {
+		const struct imx_media_pixfmt *fmt = &pixel_formats[i];
+		enum imx_pixfmt_sel sel;
 
-static const struct imx_media_pixfmt ipu_rgb_formats[] = {
-	{
-		.fourcc	= V4L2_PIX_FMT_XRGB32,
-		.codes  = {MEDIA_BUS_FMT_ARGB8888_1X32},
-		.cs     = IPUV3_COLORSPACE_RGB,
-		.bpp    = 32,
-		.ipufmt = true,
-	},
-};
+		if (sel_ipu != fmt->ipufmt)
+			continue;
 
-#define NUM_IPU_RGB_FORMATS ARRAY_SIZE(ipu_rgb_formats)
+		sel = fmt->bayer ? PIXFMT_SEL_BAYER :
+			((fmt->cs == IPUV3_COLORSPACE_YUV) ?
+			 PIXFMT_SEL_YUV : PIXFMT_SEL_RGB);
 
-static void init_mbus_colorimetry(struct v4l2_mbus_framefmt *mbus,
-				  const struct imx_media_pixfmt *fmt)
-{
-	mbus->colorspace = (fmt->cs == IPUV3_COLORSPACE_RGB) ?
-		V4L2_COLORSPACE_SRGB : V4L2_COLORSPACE_SMPTE170M;
-	mbus->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(mbus->colorspace);
-	mbus->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(mbus->colorspace);
-	mbus->quantization =
-		V4L2_MAP_QUANTIZATION_DEFAULT(fmt->cs == IPUV3_COLORSPACE_RGB,
-					      mbus->colorspace,
-					      mbus->ycbcr_enc);
+		if ((fmt_sel & sel) && fmt->fourcc == fourcc)
+			return fmt;
+	}
+
+	return NULL;
 }
+EXPORT_SYMBOL_GPL(imx_media_find_pixel_format);
 
-static const
-struct imx_media_pixfmt *__find_format(u32 fourcc,
-				       u32 code,
-				       bool allow_non_mbus,
-				       bool allow_bayer,
-				       const struct imx_media_pixfmt *array,
-				       u32 array_size)
+/*
+ * Search in the pixel_formats[] array for an entry with the given media
+ * bus code that matches the requested selection criteria and return it.
+ *
+ * @code: Search for an entry with the given media-bus code.
+ * @fmt_sel: Allow entries only with the given selection criteria.
+ */
+const struct imx_media_pixfmt *
+imx_media_find_mbus_format(u32 code, enum imx_pixfmt_sel fmt_sel)
 {
-	const struct imx_media_pixfmt *fmt;
-	int i, j;
+	bool sel_ipu = fmt_sel & PIXFMT_SEL_IPU;
+	unsigned int i;
+
+	fmt_sel &= ~PIXFMT_SEL_IPU;
 
-	for (i = 0; i < array_size; i++) {
-		fmt = &array[i];
+	for (i = 0; i < ARRAY_SIZE(pixel_formats); i++) {
+		const struct imx_media_pixfmt *fmt = &pixel_formats[i];
+		enum imx_pixfmt_sel sel;
+		unsigned int j;
 
-		if ((!allow_non_mbus && !fmt->codes[0]) ||
-		    (!allow_bayer && fmt->bayer))
+		if (sel_ipu != fmt->ipufmt)
 			continue;
 
-		if (fourcc && fmt->fourcc == fourcc)
-			return fmt;
+		sel = fmt->bayer ? PIXFMT_SEL_BAYER :
+			((fmt->cs == IPUV3_COLORSPACE_YUV) ?
+			 PIXFMT_SEL_YUV : PIXFMT_SEL_RGB);
 
-		if (!code)
+		if (!(fmt_sel & sel) || !fmt->codes)
 			continue;
 
 		for (j = 0; fmt->codes[j]; j++) {
@@ -275,199 +268,103 @@ struct imx_media_pixfmt *__find_format(u32 fourcc,
 				return fmt;
 		}
 	}
+
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(imx_media_find_mbus_format);
 
-static const struct imx_media_pixfmt *find_format(u32 fourcc,
-						  u32 code,
-						  enum codespace_sel cs_sel,
-						  bool allow_non_mbus,
-						  bool allow_bayer)
+/*
+ * Enumerate entries in the pixel_formats[] array that match the
+ * requested selection criteria. Return the fourcc that matches the
+ * selection criteria at the requested match index.
+ *
+ * @fourcc: The returned fourcc that matches the search criteria at
+ *          the requested match index.
+ * @index: The requested match index.
+ * @fmt_sel: Include in the enumeration entries with the given selection
+ *           criteria.
+ */
+int imx_media_enum_pixel_formats(u32 *fourcc, u32 index,
+				 enum imx_pixfmt_sel fmt_sel)
 {
-	const struct imx_media_pixfmt *ret;
-
-	switch (cs_sel) {
-	case CS_SEL_YUV:
-		return __find_format(fourcc, code, allow_non_mbus, allow_bayer,
-				     yuv_formats, NUM_YUV_FORMATS);
-	case CS_SEL_RGB:
-		return __find_format(fourcc, code, allow_non_mbus, allow_bayer,
-				     rgb_formats, NUM_RGB_FORMATS);
-	case CS_SEL_ANY:
-		ret = __find_format(fourcc, code, allow_non_mbus, allow_bayer,
-				    yuv_formats, NUM_YUV_FORMATS);
-		if (ret)
-			return ret;
-		return __find_format(fourcc, code, allow_non_mbus, allow_bayer,
-				     rgb_formats, NUM_RGB_FORMATS);
-	default:
-		return NULL;
-	}
-}
+	bool sel_ipu = fmt_sel & PIXFMT_SEL_IPU;
+	unsigned int i;
 
-static int enum_format(u32 *fourcc, u32 *code, u32 index,
-		       enum codespace_sel cs_sel,
-		       bool allow_non_mbus,
-		       bool allow_bayer)
-{
-	const struct imx_media_pixfmt *fmt;
-	u32 mbus_yuv_sz = NUM_MBUS_YUV_FORMATS;
-	u32 mbus_rgb_sz = NUM_MBUS_RGB_FORMATS;
-	u32 yuv_sz = NUM_YUV_FORMATS;
-	u32 rgb_sz = NUM_RGB_FORMATS;
-
-	switch (cs_sel) {
-	case CS_SEL_YUV:
-		if (index >= yuv_sz ||
-		    (!allow_non_mbus && index >= mbus_yuv_sz))
-			return -EINVAL;
-		fmt = &yuv_formats[index];
-		break;
-	case CS_SEL_RGB:
-		if (index >= rgb_sz ||
-		    (!allow_non_mbus && index >= mbus_rgb_sz))
-			return -EINVAL;
-		fmt = &rgb_formats[index];
-		if (!allow_bayer && fmt->bayer)
-			return -EINVAL;
-		break;
-	case CS_SEL_ANY:
-		if (!allow_non_mbus) {
-			if (index >= mbus_yuv_sz) {
-				index -= mbus_yuv_sz;
-				if (index >= mbus_rgb_sz)
-					return -EINVAL;
-				fmt = &rgb_formats[index];
-				if (!allow_bayer && fmt->bayer)
-					return -EINVAL;
-			} else {
-				fmt = &yuv_formats[index];
-			}
-		} else {
-			if (index >= yuv_sz + rgb_sz)
-				return -EINVAL;
-			if (index >= yuv_sz) {
-				fmt = &rgb_formats[index - yuv_sz];
-				if (!allow_bayer && fmt->bayer)
-					return -EINVAL;
-			} else {
-				fmt = &yuv_formats[index];
-			}
+	fmt_sel &= ~PIXFMT_SEL_IPU;
+
+	for (i = 0; i < ARRAY_SIZE(pixel_formats); i++) {
+		const struct imx_media_pixfmt *fmt = &pixel_formats[i];
+		enum imx_pixfmt_sel sel;
+
+		if (sel_ipu != fmt->ipufmt)
+			continue;
+
+		sel = fmt->bayer ? PIXFMT_SEL_BAYER :
+			((fmt->cs == IPUV3_COLORSPACE_YUV) ?
+			 PIXFMT_SEL_YUV : PIXFMT_SEL_RGB);
+
+		if (!(fmt_sel & sel))
+			continue;
+
+		if (index == 0) {
+			*fourcc = fmt->fourcc;
+			return 0;
 		}
-		break;
-	default:
-		return -EINVAL;
-	}
 
-	if (fourcc)
-		*fourcc = fmt->fourcc;
-	if (code)
-		*code = fmt->codes[0];
+		index--;
+	}
 
-	return 0;
+	return -EINVAL;
 }
+EXPORT_SYMBOL_GPL(imx_media_enum_pixel_formats);
 
-const struct imx_media_pixfmt *
-imx_media_find_format(u32 fourcc, enum codespace_sel cs_sel, bool allow_bayer)
+/*
+ * Enumerate entries in the pixel_formats[] array that match the
+ * requested search criteria. Return the media-bus code that matches
+ * the search criteria at the requested match index.
+ *
+ * @code: The returned media-bus code that matches the search criteria at
+ *        the requested match index.
+ * @index: The requested match index.
+ * @fmt_sel: Include in the enumeration entries with the given selection
+ *           criteria.
+ */
+int imx_media_enum_mbus_formats(u32 *code, u32 index,
+				enum imx_pixfmt_sel fmt_sel)
 {
-	return find_format(fourcc, 0, cs_sel, true, allow_bayer);
-}
-EXPORT_SYMBOL_GPL(imx_media_find_format);
+	bool sel_ipu = fmt_sel & PIXFMT_SEL_IPU;
+	unsigned int i;
 
-int imx_media_enum_format(u32 *fourcc, u32 index, enum codespace_sel cs_sel)
-{
-	return enum_format(fourcc, NULL, index, cs_sel, true, false);
-}
-EXPORT_SYMBOL_GPL(imx_media_enum_format);
+	fmt_sel &= ~PIXFMT_SEL_IPU;
 
-const struct imx_media_pixfmt *
-imx_media_find_mbus_format(u32 code, enum codespace_sel cs_sel,
-			   bool allow_bayer)
-{
-	return find_format(0, code, cs_sel, false, allow_bayer);
-}
-EXPORT_SYMBOL_GPL(imx_media_find_mbus_format);
+	for (i = 0; i < ARRAY_SIZE(pixel_formats); i++) {
+		const struct imx_media_pixfmt *fmt = &pixel_formats[i];
+		enum imx_pixfmt_sel sel;
+		unsigned int j;
 
-int imx_media_enum_mbus_format(u32 *code, u32 index, enum codespace_sel cs_sel,
-			       bool allow_bayer)
-{
-	return enum_format(NULL, code, index, cs_sel, false, allow_bayer);
-}
-EXPORT_SYMBOL_GPL(imx_media_enum_mbus_format);
+		if (sel_ipu != fmt->ipufmt)
+			continue;
 
-const struct imx_media_pixfmt *
-imx_media_find_ipu_format(u32 code, enum codespace_sel cs_sel)
-{
-	const struct imx_media_pixfmt *array, *fmt, *ret = NULL;
-	u32 array_size;
-	int i, j;
-
-	switch (cs_sel) {
-	case CS_SEL_YUV:
-		array_size = NUM_IPU_YUV_FORMATS;
-		array = ipu_yuv_formats;
-		break;
-	case CS_SEL_RGB:
-		array_size = NUM_IPU_RGB_FORMATS;
-		array = ipu_rgb_formats;
-		break;
-	case CS_SEL_ANY:
-		array_size = NUM_IPU_YUV_FORMATS + NUM_IPU_RGB_FORMATS;
-		array = ipu_yuv_formats;
-		break;
-	default:
-		return NULL;
-	}
+		sel = fmt->bayer ? PIXFMT_SEL_BAYER :
+			((fmt->cs == IPUV3_COLORSPACE_YUV) ?
+			 PIXFMT_SEL_YUV : PIXFMT_SEL_RGB);
 
-	for (i = 0; i < array_size; i++) {
-		if (cs_sel == CS_SEL_ANY && i >= NUM_IPU_YUV_FORMATS)
-			fmt = &ipu_rgb_formats[i - NUM_IPU_YUV_FORMATS];
-		else
-			fmt = &array[i];
+		if (!(fmt_sel & sel) || !fmt->codes)
+			continue;
 
-		for (j = 0; code && fmt->codes[j]; j++) {
-			if (code == fmt->codes[j]) {
-				ret = fmt;
-				goto out;
+		for (j = 0; fmt->codes[j]; j++) {
+			if (index == 0) {
+				*code = fmt->codes[j];
+				return 0;
 			}
-		}
-	}
 
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(imx_media_find_ipu_format);
-
-int imx_media_enum_ipu_format(u32 *code, u32 index, enum codespace_sel cs_sel)
-{
-	switch (cs_sel) {
-	case CS_SEL_YUV:
-		if (index >= NUM_IPU_YUV_FORMATS)
-			return -EINVAL;
-		*code = ipu_yuv_formats[index].codes[0];
-		break;
-	case CS_SEL_RGB:
-		if (index >= NUM_IPU_RGB_FORMATS)
-			return -EINVAL;
-		*code = ipu_rgb_formats[index].codes[0];
-		break;
-	case CS_SEL_ANY:
-		if (index >= NUM_IPU_YUV_FORMATS + NUM_IPU_RGB_FORMATS)
-			return -EINVAL;
-		if (index >= NUM_IPU_YUV_FORMATS) {
-			index -= NUM_IPU_YUV_FORMATS;
-			*code = ipu_rgb_formats[index].codes[0];
-		} else {
-			*code = ipu_yuv_formats[index].codes[0];
+			index--;
 		}
-		break;
-	default:
-		return -EINVAL;
 	}
 
-	return 0;
+	return -EINVAL;
 }
-EXPORT_SYMBOL_GPL(imx_media_enum_ipu_format);
+EXPORT_SYMBOL_GPL(imx_media_enum_mbus_formats);
 
 int imx_media_init_mbus_fmt(struct v4l2_mbus_framefmt *mbus,
 			    u32 width, u32 height, u32 code, u32 field,
@@ -478,17 +375,28 @@ int imx_media_init_mbus_fmt(struct v4l2_mbus_framefmt *mbus,
 	mbus->width = width;
 	mbus->height = height;
 	mbus->field = field;
+
 	if (code == 0)
-		imx_media_enum_mbus_format(&code, 0, CS_SEL_YUV, false);
-	lcc = imx_media_find_mbus_format(code, CS_SEL_ANY, false);
+		imx_media_enum_mbus_formats(&code, 0, PIXFMT_SEL_YUV);
+
+	lcc = imx_media_find_mbus_format(code, PIXFMT_SEL_ANY);
 	if (!lcc) {
-		lcc = imx_media_find_ipu_format(code, CS_SEL_ANY);
+		lcc = imx_media_find_ipu_format(code, PIXFMT_SEL_YUV_RGB);
 		if (!lcc)
 			return -EINVAL;
 	}
 
 	mbus->code = code;
-	init_mbus_colorimetry(mbus, lcc);
+
+	mbus->colorspace = (lcc->cs == IPUV3_COLORSPACE_RGB) ?
+		V4L2_COLORSPACE_SRGB : V4L2_COLORSPACE_SMPTE170M;
+	mbus->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(mbus->colorspace);
+	mbus->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(mbus->colorspace);
+	mbus->quantization =
+		V4L2_MAP_QUANTIZATION_DEFAULT(lcc->cs == IPUV3_COLORSPACE_RGB,
+					      mbus->colorspace,
+					      mbus->ycbcr_enc);
+
 	if (cc)
 		*cc = lcc;
 
@@ -542,9 +450,11 @@ void imx_media_try_colorimetry(struct v4l2_mbus_framefmt *tryfmt,
 	const struct imx_media_pixfmt *cc;
 	bool is_rgb = false;
 
-	cc = imx_media_find_mbus_format(tryfmt->code, CS_SEL_ANY, true);
+	cc = imx_media_find_mbus_format(tryfmt->code, PIXFMT_SEL_ANY);
 	if (!cc)
-		cc = imx_media_find_ipu_format(tryfmt->code, CS_SEL_ANY);
+		cc = imx_media_find_ipu_format(tryfmt->code,
+					       PIXFMT_SEL_YUV_RGB);
+
 	if (cc && cc->cs == IPUV3_COLORSPACE_RGB)
 		is_rgb = true;
 
@@ -587,17 +497,18 @@ void imx_media_try_colorimetry(struct v4l2_mbus_framefmt *tryfmt,
 EXPORT_SYMBOL_GPL(imx_media_try_colorimetry);
 
 int imx_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix,
-				  struct v4l2_mbus_framefmt *mbus,
+				  const struct v4l2_mbus_framefmt *mbus,
 				  const struct imx_media_pixfmt *cc)
 {
 	u32 width;
 	u32 stride;
 
 	if (!cc) {
-		cc = imx_media_find_ipu_format(mbus->code, CS_SEL_ANY);
+		cc = imx_media_find_ipu_format(mbus->code,
+					       PIXFMT_SEL_YUV_RGB);
 		if (!cc)
-			cc = imx_media_find_mbus_format(mbus->code, CS_SEL_ANY,
-							true);
+			cc = imx_media_find_mbus_format(mbus->code,
+							PIXFMT_SEL_ANY);
 		if (!cc)
 			return -EINVAL;
 	}
@@ -609,8 +520,8 @@ int imx_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix,
 	if (cc->ipufmt && cc->cs == IPUV3_COLORSPACE_YUV) {
 		u32 code;
 
-		imx_media_enum_mbus_format(&code, 0, CS_SEL_YUV, false);
-		cc = imx_media_find_mbus_format(code, CS_SEL_YUV, false);
+		imx_media_enum_mbus_formats(&code, 0, PIXFMT_SEL_YUV);
+		cc = imx_media_find_mbus_format(code, PIXFMT_SEL_YUV);
 	}
 
 	/* Round up width for minimum burst size */
@@ -639,7 +550,7 @@ int imx_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix,
 EXPORT_SYMBOL_GPL(imx_media_mbus_fmt_to_pix_fmt);
 
 int imx_media_mbus_fmt_to_ipu_image(struct ipu_image *image,
-				    struct v4l2_mbus_framefmt *mbus)
+				    const struct v4l2_mbus_framefmt *mbus)
 {
 	int ret;
 
@@ -657,12 +568,13 @@ int imx_media_mbus_fmt_to_ipu_image(struct ipu_image *image,
 EXPORT_SYMBOL_GPL(imx_media_mbus_fmt_to_ipu_image);
 
 int imx_media_ipu_image_to_mbus_fmt(struct v4l2_mbus_framefmt *mbus,
-				    struct ipu_image *image)
+				    const struct ipu_image *image)
 {
 	const struct imx_media_pixfmt *fmt;
 
-	fmt = imx_media_find_format(image->pix.pixelformat, CS_SEL_ANY, true);
-	if (!fmt)
+	fmt = imx_media_find_pixel_format(image->pix.pixelformat,
+					  PIXFMT_SEL_ANY);
+	if (!fmt || !fmt->codes || !fmt->codes[0])
 		return -EINVAL;
 
 	memset(mbus, 0, sizeof(*mbus));
diff --git a/drivers/staging/media/imx/imx-media-vdic.c b/drivers/staging/media/imx/imx-media-vdic.c
index 0d83c2c41606..303b5407fb64 100644
--- a/drivers/staging/media/imx/imx-media-vdic.c
+++ b/drivers/staging/media/imx/imx-media-vdic.c
@@ -548,7 +548,8 @@ static int vdic_enum_mbus_code(struct v4l2_subdev *sd,
 	if (code->pad >= VDIC_NUM_PADS)
 		return -EINVAL;
 
-	return imx_media_enum_ipu_format(&code->code, code->index, CS_SEL_YUV);
+	return imx_media_enum_ipu_formats(&code->code, code->index,
+					  PIXFMT_SEL_YUV);
 }
 
 static int vdic_get_fmt(struct v4l2_subdev *sd,
@@ -583,12 +584,13 @@ static void vdic_try_fmt(struct vdic_priv *priv,
 {
 	struct v4l2_mbus_framefmt *infmt;
 
-	*cc = imx_media_find_ipu_format(sdformat->format.code, CS_SEL_YUV);
+	*cc = imx_media_find_ipu_format(sdformat->format.code,
+					PIXFMT_SEL_YUV);
 	if (!*cc) {
 		u32 code;
 
-		imx_media_enum_ipu_format(&code, 0, CS_SEL_YUV);
-		*cc = imx_media_find_ipu_format(code, CS_SEL_YUV);
+		imx_media_enum_ipu_formats(&code, 0, PIXFMT_SEL_YUV);
+		*cc = imx_media_find_ipu_format(code, PIXFMT_SEL_YUV);
 		sdformat->format.code = (*cc)->codes[0];
 	}
 
@@ -850,7 +852,7 @@ static int vdic_registered(struct v4l2_subdev *sd)
 	for (i = 0; i < VDIC_NUM_PADS; i++) {
 		code = 0;
 		if (i != VDIC_SINK_PAD_IDMAC)
-			imx_media_enum_ipu_format(&code, 0, CS_SEL_YUV);
+			imx_media_enum_ipu_formats(&code, 0, PIXFMT_SEL_YUV);
 
 		/* set a default mbus format  */
 		ret = imx_media_init_mbus_fmt(&priv->format_mbus[i],
diff --git a/drivers/staging/media/imx/imx-media.h b/drivers/staging/media/imx/imx-media.h
index 11861191324a..ca36beca16de 100644
--- a/drivers/staging/media/imx/imx-media.h
+++ b/drivers/staging/media/imx/imx-media.h
@@ -68,8 +68,13 @@ enum {
 #define IMX_MEDIA_EOF_TIMEOUT       1000
 
 struct imx_media_pixfmt {
+	/* the in-memory FourCC pixel format */
 	u32     fourcc;
-	u32     codes[4];
+	/*
+	 * the set of equivalent media bus codes for the fourcc.
+	 * NOTE! codes pointer is NULL for in-memory-only formats.
+	 */
+	const u32 *codes;
 	int     bpp;     /* total bpp */
 	/* cycles per pixel for generic (bayer) formats for the parallel bus */
 	int	cycles;
@@ -79,6 +84,15 @@ struct imx_media_pixfmt {
 	bool    ipufmt;  /* is one of the IPU internal formats */
 };
 
+enum imx_pixfmt_sel {
+	PIXFMT_SEL_YUV   = BIT(0), /* select YUV formats */
+	PIXFMT_SEL_RGB   = BIT(1), /* select RGB formats */
+	PIXFMT_SEL_BAYER = BIT(2), /* select BAYER formats */
+	PIXFMT_SEL_IPU   = BIT(3), /* select IPU-internal formats */
+	PIXFMT_SEL_YUV_RGB = PIXFMT_SEL_YUV | PIXFMT_SEL_RGB,
+	PIXFMT_SEL_ANY = PIXFMT_SEL_YUV | PIXFMT_SEL_RGB | PIXFMT_SEL_BAYER,
+};
+
 struct imx_media_buffer {
 	struct vb2_v4l2_buffer vbuf; /* v4l buffer must be first */
 	struct list_head  list;
@@ -149,24 +163,29 @@ struct imx_media_dev {
 	struct v4l2_subdev *sync_sd[2][NUM_IPU_SUBDEVS];
 };
 
-enum codespace_sel {
-	CS_SEL_YUV = 0,
-	CS_SEL_RGB,
-	CS_SEL_ANY,
-};
-
 /* imx-media-utils.c */
 const struct imx_media_pixfmt *
-imx_media_find_format(u32 fourcc, enum codespace_sel cs_sel, bool allow_bayer);
-int imx_media_enum_format(u32 *fourcc, u32 index, enum codespace_sel cs_sel);
-const struct imx_media_pixfmt *
-imx_media_find_mbus_format(u32 code, enum codespace_sel cs_sel,
-			   bool allow_bayer);
-int imx_media_enum_mbus_format(u32 *code, u32 index, enum codespace_sel cs_sel,
-			       bool allow_bayer);
+imx_media_find_pixel_format(u32 fourcc, enum imx_pixfmt_sel sel);
+int imx_media_enum_pixel_formats(u32 *fourcc, u32 index,
+				 enum imx_pixfmt_sel sel);
 const struct imx_media_pixfmt *
-imx_media_find_ipu_format(u32 code, enum codespace_sel cs_sel);
-int imx_media_enum_ipu_format(u32 *code, u32 index, enum codespace_sel cs_sel);
+imx_media_find_mbus_format(u32 code, enum imx_pixfmt_sel sel);
+int imx_media_enum_mbus_formats(u32 *code, u32 index,
+				enum imx_pixfmt_sel sel);
+
+static inline const struct imx_media_pixfmt *
+imx_media_find_ipu_format(u32 code, enum imx_pixfmt_sel fmt_sel)
+{
+	return imx_media_find_mbus_format(code, fmt_sel | PIXFMT_SEL_IPU);
+}
+
+static inline int imx_media_enum_ipu_formats(u32 *code, u32 index,
+					     enum imx_pixfmt_sel fmt_sel)
+{
+	return imx_media_enum_mbus_formats(code, index,
+					  fmt_sel | PIXFMT_SEL_IPU);
+}
+
 int imx_media_init_mbus_fmt(struct v4l2_mbus_framefmt *mbus,
 			    u32 width, u32 height, u32 code, u32 field,
 			    const struct imx_media_pixfmt **cc);
@@ -175,12 +194,12 @@ int imx_media_init_cfg(struct v4l2_subdev *sd,
 void imx_media_try_colorimetry(struct v4l2_mbus_framefmt *tryfmt,
 			       bool ic_route);
 int imx_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix,
-				  struct v4l2_mbus_framefmt *mbus,
+				  const struct v4l2_mbus_framefmt *mbus,
 				  const struct imx_media_pixfmt *cc);
 int imx_media_mbus_fmt_to_ipu_image(struct ipu_image *image,
-				    struct v4l2_mbus_framefmt *mbus);
+				    const struct v4l2_mbus_framefmt *mbus);
 int imx_media_ipu_image_to_mbus_fmt(struct v4l2_mbus_framefmt *mbus,
-				    struct ipu_image *image);
+				    const struct ipu_image *image);
 void imx_media_grp_id_to_sd_name(char *sd_name, int sz,
 				 u32 grp_id, int ipu_id);
 struct v4l2_subdev *
diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/staging/media/imx/imx7-media-csi.c
index acbdffb77668..1ac10f807ac0 100644
--- a/drivers/staging/media/imx/imx7-media-csi.c
+++ b/drivers/staging/media/imx/imx7-media-csi.c
@@ -958,8 +958,8 @@ static int imx7_csi_enum_mbus_code(struct v4l2_subdev *sd,
 
 	switch (code->pad) {
 	case IMX7_CSI_PAD_SINK:
-		ret = imx_media_enum_mbus_format(&code->code, code->index,
-						 CS_SEL_ANY, true);
+		ret = imx_media_enum_mbus_formats(&code->code, code->index,
+						  PIXFMT_SEL_ANY);
 		break;
 	case IMX7_CSI_PAD_SRC:
 		if (code->index != 0) {
@@ -1019,8 +1019,8 @@ static int imx7_csi_try_fmt(struct imx7_csi *csi,
 
 	switch (sdformat->pad) {
 	case IMX7_CSI_PAD_SRC:
-		in_cc = imx_media_find_mbus_format(in_fmt->code, CS_SEL_ANY,
-						   true);
+		in_cc = imx_media_find_mbus_format(in_fmt->code,
+						   PIXFMT_SEL_ANY);
 
 		sdformat->format.width = in_fmt->width;
 		sdformat->format.height = in_fmt->height;
@@ -1035,11 +1035,12 @@ static int imx7_csi_try_fmt(struct imx7_csi *csi,
 		break;
 	case IMX7_CSI_PAD_SINK:
 		*cc = imx_media_find_mbus_format(sdformat->format.code,
-						 CS_SEL_ANY, true);
+						 PIXFMT_SEL_ANY);
 		if (!*cc) {
-			imx_media_enum_mbus_format(&code, 0, CS_SEL_ANY, false);
-			*cc = imx_media_find_mbus_format(code, CS_SEL_ANY,
-							 false);
+			imx_media_enum_mbus_formats(&code, 0,
+						    PIXFMT_SEL_YUV_RGB);
+			*cc = imx_media_find_mbus_format(code,
+							 PIXFMT_SEL_YUV_RGB);
 			sdformat->format.code = (*cc)->codes[0];
 		}
 
diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index fbc1a924652a..e2403b448b6d 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -14,32 +14,29 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/kernel.h>
-#include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of_graph.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/reset.h>
 #include <linux/regulator/consumer.h>
+#include <linux/reset.h>
 #include <linux/spinlock.h>
 
 #include <media/v4l2-device.h>
 #include <media/v4l2-fwnode.h>
 #include <media/v4l2-subdev.h>
 
-#include "imx-media.h"
+#define CSIS_DRIVER_NAME			"imx7-mipi-csis"
+#define CSIS_SUBDEV_NAME			CSIS_DRIVER_NAME
 
-#define CSIS_DRIVER_NAME	"imx7-mipi-csis"
-#define CSIS_SUBDEV_NAME	CSIS_DRIVER_NAME
+#define CSIS_PAD_SINK				0
+#define CSIS_PAD_SOURCE				1
+#define CSIS_PADS_NUM				2
 
-#define CSIS_PAD_SINK		0
-#define CSIS_PAD_SOURCE		1
-#define CSIS_PADS_NUM		2
-
-#define MIPI_CSIS_DEF_PIX_WIDTH		640
-#define MIPI_CSIS_DEF_PIX_HEIGHT	480
+#define MIPI_CSIS_DEF_PIX_WIDTH			640
+#define MIPI_CSIS_DEF_PIX_HEIGHT		480
 
 /* Register map definition */
 
@@ -64,42 +61,42 @@
 #define MIPI_CSIS_CLK_CTRL_WCLK_SRC		BIT(0)
 
 /* CSIS Interrupt mask */
-#define MIPI_CSIS_INTMSK		0x10
-#define MIPI_CSIS_INTMSK_EVEN_BEFORE	BIT(31)
-#define MIPI_CSIS_INTMSK_EVEN_AFTER	BIT(30)
-#define MIPI_CSIS_INTMSK_ODD_BEFORE	BIT(29)
-#define MIPI_CSIS_INTMSK_ODD_AFTER	BIT(28)
-#define MIPI_CSIS_INTMSK_FRAME_START	BIT(24)
-#define MIPI_CSIS_INTMSK_FRAME_END	BIT(20)
-#define MIPI_CSIS_INTMSK_ERR_SOT_HS	BIT(16)
-#define MIPI_CSIS_INTMSK_ERR_LOST_FS	BIT(12)
-#define MIPI_CSIS_INTMSK_ERR_LOST_FE	BIT(8)
-#define MIPI_CSIS_INTMSK_ERR_OVER	BIT(4)
-#define MIPI_CSIS_INTMSK_ERR_WRONG_CFG	BIT(3)
-#define MIPI_CSIS_INTMSK_ERR_ECC	BIT(2)
-#define MIPI_CSIS_INTMSK_ERR_CRC	BIT(1)
-#define MIPI_CSIS_INTMSK_ERR_UNKNOWN	BIT(0)
+#define MIPI_CSIS_INTMSK			0x10
+#define MIPI_CSIS_INTMSK_EVEN_BEFORE		BIT(31)
+#define MIPI_CSIS_INTMSK_EVEN_AFTER		BIT(30)
+#define MIPI_CSIS_INTMSK_ODD_BEFORE		BIT(29)
+#define MIPI_CSIS_INTMSK_ODD_AFTER		BIT(28)
+#define MIPI_CSIS_INTMSK_FRAME_START		BIT(24)
+#define MIPI_CSIS_INTMSK_FRAME_END		BIT(20)
+#define MIPI_CSIS_INTMSK_ERR_SOT_HS		BIT(16)
+#define MIPI_CSIS_INTMSK_ERR_LOST_FS		BIT(12)
+#define MIPI_CSIS_INTMSK_ERR_LOST_FE		BIT(8)
+#define MIPI_CSIS_INTMSK_ERR_OVER		BIT(4)
+#define MIPI_CSIS_INTMSK_ERR_WRONG_CFG		BIT(3)
+#define MIPI_CSIS_INTMSK_ERR_ECC		BIT(2)
+#define MIPI_CSIS_INTMSK_ERR_CRC		BIT(1)
+#define MIPI_CSIS_INTMSK_ERR_UNKNOWN		BIT(0)
 
 /* CSIS Interrupt source */
-#define MIPI_CSIS_INTSRC		0x14
-#define MIPI_CSIS_INTSRC_EVEN_BEFORE	BIT(31)
-#define MIPI_CSIS_INTSRC_EVEN_AFTER	BIT(30)
-#define MIPI_CSIS_INTSRC_EVEN		BIT(30)
-#define MIPI_CSIS_INTSRC_ODD_BEFORE	BIT(29)
-#define MIPI_CSIS_INTSRC_ODD_AFTER	BIT(28)
-#define MIPI_CSIS_INTSRC_ODD		(0x3 << 28)
-#define MIPI_CSIS_INTSRC_NON_IMAGE_DATA	(0xf << 28)
-#define MIPI_CSIS_INTSRC_FRAME_START	BIT(24)
-#define MIPI_CSIS_INTSRC_FRAME_END	BIT(20)
-#define MIPI_CSIS_INTSRC_ERR_SOT_HS	BIT(16)
-#define MIPI_CSIS_INTSRC_ERR_LOST_FS	BIT(12)
-#define MIPI_CSIS_INTSRC_ERR_LOST_FE	BIT(8)
-#define MIPI_CSIS_INTSRC_ERR_OVER	BIT(4)
-#define MIPI_CSIS_INTSRC_ERR_WRONG_CFG	BIT(3)
-#define MIPI_CSIS_INTSRC_ERR_ECC	BIT(2)
-#define MIPI_CSIS_INTSRC_ERR_CRC	BIT(1)
-#define MIPI_CSIS_INTSRC_ERR_UNKNOWN	BIT(0)
-#define MIPI_CSIS_INTSRC_ERRORS		0xfffff
+#define MIPI_CSIS_INTSRC			0x14
+#define MIPI_CSIS_INTSRC_EVEN_BEFORE		BIT(31)
+#define MIPI_CSIS_INTSRC_EVEN_AFTER		BIT(30)
+#define MIPI_CSIS_INTSRC_EVEN			BIT(30)
+#define MIPI_CSIS_INTSRC_ODD_BEFORE		BIT(29)
+#define MIPI_CSIS_INTSRC_ODD_AFTER		BIT(28)
+#define MIPI_CSIS_INTSRC_ODD			(0x3 << 28)
+#define MIPI_CSIS_INTSRC_NON_IMAGE_DATA		(0xf << 28)
+#define MIPI_CSIS_INTSRC_FRAME_START		BIT(24)
+#define MIPI_CSIS_INTSRC_FRAME_END		BIT(20)
+#define MIPI_CSIS_INTSRC_ERR_SOT_HS		BIT(16)
+#define MIPI_CSIS_INTSRC_ERR_LOST_FS		BIT(12)
+#define MIPI_CSIS_INTSRC_ERR_LOST_FE		BIT(8)
+#define MIPI_CSIS_INTSRC_ERR_OVER		BIT(4)
+#define MIPI_CSIS_INTSRC_ERR_WRONG_CFG		BIT(3)
+#define MIPI_CSIS_INTSRC_ERR_ECC		BIT(2)
+#define MIPI_CSIS_INTSRC_ERR_CRC		BIT(1)
+#define MIPI_CSIS_INTSRC_ERR_UNKNOWN		BIT(0)
+#define MIPI_CSIS_INTSRC_ERRORS			0xfffff
 
 /* D-PHY status control */
 #define MIPI_CSIS_DPHYSTATUS			0x20
@@ -121,19 +118,19 @@
 #define MIPI_CSIS_DPHYCTRL_ENABLE		(0x1f << 0)
 
 /* D-PHY Master and Slave Control register Low */
-#define MIPI_CSIS_DPHYBCTRL_L		0x30
+#define MIPI_CSIS_DPHYBCTRL_L			0x30
 /* D-PHY Master and Slave Control register High */
-#define MIPI_CSIS_DPHYBCTRL_H		0x34
+#define MIPI_CSIS_DPHYBCTRL_H			0x34
 /* D-PHY Slave Control register Low */
-#define MIPI_CSIS_DPHYSCTRL_L		0x38
+#define MIPI_CSIS_DPHYSCTRL_L			0x38
 /* D-PHY Slave Control register High */
-#define MIPI_CSIS_DPHYSCTRL_H		0x3c
+#define MIPI_CSIS_DPHYSCTRL_H			0x3c
 
 /* ISP Configuration register */
-#define MIPI_CSIS_ISPCONFIG_CH0		0x40
-#define MIPI_CSIS_ISPCONFIG_CH1		0x50
-#define MIPI_CSIS_ISPCONFIG_CH2		0x60
-#define MIPI_CSIS_ISPCONFIG_CH3		0x70
+#define MIPI_CSIS_ISPCONFIG_CH0			0x40
+#define MIPI_CSIS_ISPCONFIG_CH1			0x50
+#define MIPI_CSIS_ISPCONFIG_CH2			0x60
+#define MIPI_CSIS_ISPCONFIG_CH3			0x70
 
 #define MIPI_CSIS_ISPCFG_MEM_FULL_GAP_MSK	(0xff << 24)
 #define MIPI_CSIS_ISPCFG_MEM_FULL_GAP(x)	((x) << 24)
@@ -143,35 +140,36 @@
 #define MIPI_CSIS_ISPCFG_FMT_RAW8		(0x2a << 2)
 #define MIPI_CSIS_ISPCFG_FMT_RAW10		(0x2b << 2)
 #define MIPI_CSIS_ISPCFG_FMT_RAW12		(0x2c << 2)
+#define MIPI_CSIS_ISPCFG_FMT_RAW14		(0x2d << 2)
 
 /* User defined formats, x = 1...4 */
-#define MIPI_CSIS_ISPCFG_FMT_USER(x)	((0x30 + (x) - 1) << 2)
-#define MIPI_CSIS_ISPCFG_FMT_MASK	(0x3f << 2)
+#define MIPI_CSIS_ISPCFG_FMT_USER(x)		((0x30 + (x) - 1) << 2)
+#define MIPI_CSIS_ISPCFG_FMT_MASK		(0x3f << 2)
 
 /* ISP Image Resolution register */
-#define MIPI_CSIS_ISPRESOL_CH0		0x44
-#define MIPI_CSIS_ISPRESOL_CH1		0x54
-#define MIPI_CSIS_ISPRESOL_CH2		0x64
-#define MIPI_CSIS_ISPRESOL_CH3		0x74
-#define CSIS_MAX_PIX_WIDTH		0xffff
-#define CSIS_MAX_PIX_HEIGHT		0xffff
+#define MIPI_CSIS_ISPRESOL_CH0			0x44
+#define MIPI_CSIS_ISPRESOL_CH1			0x54
+#define MIPI_CSIS_ISPRESOL_CH2			0x64
+#define MIPI_CSIS_ISPRESOL_CH3			0x74
+#define CSIS_MAX_PIX_WIDTH			0xffff
+#define CSIS_MAX_PIX_HEIGHT			0xffff
 
 /* ISP SYNC register */
-#define MIPI_CSIS_ISPSYNC_CH0		0x48
-#define MIPI_CSIS_ISPSYNC_CH1		0x58
-#define MIPI_CSIS_ISPSYNC_CH2		0x68
-#define MIPI_CSIS_ISPSYNC_CH3		0x78
+#define MIPI_CSIS_ISPSYNC_CH0			0x48
+#define MIPI_CSIS_ISPSYNC_CH1			0x58
+#define MIPI_CSIS_ISPSYNC_CH2			0x68
+#define MIPI_CSIS_ISPSYNC_CH3			0x78
 
 #define MIPI_CSIS_ISPSYNC_HSYNC_LINTV_OFFSET	18
 #define MIPI_CSIS_ISPSYNC_VSYNC_SINTV_OFFSET	12
 #define MIPI_CSIS_ISPSYNC_VSYNC_EINTV_OFFSET	0
 
 /* Non-image packet data buffers */
-#define MIPI_CSIS_PKTDATA_ODD		0x2000
-#define MIPI_CSIS_PKTDATA_EVEN		0x3000
-#define MIPI_CSIS_PKTDATA_SIZE		SZ_4K
+#define MIPI_CSIS_PKTDATA_ODD			0x2000
+#define MIPI_CSIS_PKTDATA_EVEN			0x3000
+#define MIPI_CSIS_PKTDATA_SIZE			SZ_4K
 
-#define DEFAULT_SCLK_CSIS_FREQ		166000000UL
+#define DEFAULT_SCLK_CSIS_FREQ			166000000UL
 
 enum {
 	ST_POWERED	= 1,
@@ -253,45 +251,102 @@ struct csi_state {
 
 	struct csis_hw_reset hw_reset;
 	struct regulator *mipi_phy_regulator;
-	bool sink_linked;
 };
 
 struct csis_pix_format {
-	unsigned int pix_width_alignment;
 	u32 code;
 	u32 fmt_reg;
-	u8 data_alignment;
+	u8 width;
 };
 
 static const struct csis_pix_format mipi_csis_formats[] = {
+	/* YUV formats. */
 	{
-		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
-		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW10,
-		.data_alignment = 16,
-	}, {
-		.code = MEDIA_BUS_FMT_VYUY8_2X8,
+		.code = MEDIA_BUS_FMT_UYVY8_2X8,
 		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_YCBCR422_8BIT,
-		.data_alignment = 16,
+		.width = 8,
 	}, {
+		.code = MEDIA_BUS_FMT_UYVY10_2X10,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_YCBCR422_8BIT,
+		.width = 10,
+	},
+	/* RAW (Bayer and greyscale) formats. */
+	{
 		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
 		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW8,
-		.data_alignment = 8,
+		.width = 8,
 	}, {
-		.code = MEDIA_BUS_FMT_YUYV8_2X8,
-		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_YCBCR422_8BIT,
-		.data_alignment = 16,
+		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW8,
+		.width = 8,
 	}, {
 		.code = MEDIA_BUS_FMT_Y8_1X8,
 		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW8,
-		.data_alignment = 8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW10,
+		.width = 10,
 	}, {
 		.code = MEDIA_BUS_FMT_Y10_1X10,
 		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW10,
-		.data_alignment = 16,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW12,
+		.width = 12,
 	}, {
 		.code = MEDIA_BUS_FMT_Y12_1X12,
 		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW12,
-		.data_alignment = 16,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR14_1X14,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG14_1X14,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG14_1X14,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB14_1X14,
+		.fmt_reg = MIPI_CSIS_ISPCFG_FMT_RAW14,
+		.width = 14,
 	}
 };
 
@@ -405,7 +460,8 @@ static void __mipi_csis_set_format(struct csi_state *state)
 
 	/* Color format */
 	val = mipi_csis_read(state, MIPI_CSIS_ISPCONFIG_CH0);
-	val = (val & ~MIPI_CSIS_ISPCFG_FMT_MASK) | state->csis_fmt->fmt_reg;
+	val &= ~(MIPI_CSIS_ISPCFG_ALIGN_32BIT | MIPI_CSIS_ISPCFG_FMT_MASK);
+	val |= state->csis_fmt->fmt_reg;
 	mipi_csis_write(state, MIPI_CSIS_ISPCONFIG_CH0, val);
 
 	/* Pixel resolution */
@@ -437,13 +493,6 @@ static void mipi_csis_set_params(struct csi_state *state)
 
 	mipi_csis_set_hsync_settle(state, state->hs_settle);
 
-	val = mipi_csis_read(state, MIPI_CSIS_ISPCONFIG_CH0);
-	if (state->csis_fmt->data_alignment == 32)
-		val |= MIPI_CSIS_ISPCFG_ALIGN_32BIT;
-	else
-		val &= ~MIPI_CSIS_ISPCFG_ALIGN_32BIT;
-	mipi_csis_write(state, MIPI_CSIS_ISPCONFIG_CH0, val);
-
 	val = (0 << MIPI_CSIS_ISPSYNC_HSYNC_LINTV_OFFSET) |
 		(0 << MIPI_CSIS_ISPSYNC_VSYNC_SINTV_OFFSET) |
 		(0 << MIPI_CSIS_ISPSYNC_VSYNC_EINTV_OFFSET);
@@ -622,17 +671,7 @@ static int mipi_csis_link_setup(struct media_entity *entity,
 
 	mutex_lock(&state->lock);
 
-	if (local_pad->flags & MEDIA_PAD_FL_SOURCE) {
-		if (flags & MEDIA_LNK_FL_ENABLED) {
-			if (state->sink_linked) {
-				ret = -EBUSY;
-				goto out;
-			}
-			state->sink_linked = true;
-		} else {
-			state->sink_linked = false;
-		}
-	} else {
+	if (local_pad->flags & MEDIA_PAD_FL_SINK) {
 		if (flags & MEDIA_LNK_FL_ENABLED) {
 			if (state->src_sd) {
 				ret = -EBUSY;
@@ -649,48 +688,6 @@ static int mipi_csis_link_setup(struct media_entity *entity,
 	return ret;
 }
 
-static int mipi_csis_init_cfg(struct v4l2_subdev *mipi_sd,
-			      struct v4l2_subdev_pad_config *cfg)
-{
-	struct v4l2_mbus_framefmt *mf;
-	unsigned int i;
-	int ret;
-
-	for (i = 0; i < CSIS_PADS_NUM; i++) {
-		mf = v4l2_subdev_get_try_format(mipi_sd, cfg, i);
-
-		ret = imx_media_init_mbus_fmt(mf, MIPI_CSIS_DEF_PIX_HEIGHT,
-					      MIPI_CSIS_DEF_PIX_WIDTH, 0,
-					      V4L2_FIELD_NONE, NULL);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static struct csis_pix_format const *
-mipi_csis_try_format(struct v4l2_subdev *mipi_sd, struct v4l2_mbus_framefmt *mf)
-{
-	struct csi_state *state = mipi_sd_to_csis_state(mipi_sd);
-	struct csis_pix_format const *csis_fmt;
-
-	csis_fmt = find_csis_format(mf->code);
-	if (!csis_fmt)
-		csis_fmt = &mipi_csis_formats[0];
-
-	v4l_bound_align_image(&mf->width, 1, CSIS_MAX_PIX_WIDTH,
-			      csis_fmt->pix_width_alignment,
-			      &mf->height, 1, CSIS_MAX_PIX_HEIGHT, 1,
-			      0);
-
-	state->format_mbus.code = csis_fmt->code;
-	state->format_mbus.width = mf->width;
-	state->format_mbus.height = mf->height;
-
-	return csis_fmt;
-}
-
 static struct v4l2_mbus_framefmt *
 mipi_csis_get_format(struct csi_state *state,
 		     struct v4l2_subdev_pad_config *cfg,
@@ -703,53 +700,160 @@ mipi_csis_get_format(struct csi_state *state,
 	return &state->format_mbus;
 }
 
-static int mipi_csis_set_fmt(struct v4l2_subdev *mipi_sd,
+static int mipi_csis_init_cfg(struct v4l2_subdev *mipi_sd,
+			      struct v4l2_subdev_pad_config *cfg)
+{
+	struct csi_state *state = mipi_sd_to_csis_state(mipi_sd);
+	struct v4l2_mbus_framefmt *fmt_sink;
+	struct v4l2_mbus_framefmt *fmt_source;
+	enum v4l2_subdev_format_whence which;
+
+	which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt_sink = mipi_csis_get_format(state, cfg, which, CSIS_PAD_SINK);
+
+	fmt_sink->code = MEDIA_BUS_FMT_UYVY8_2X8;
+	fmt_sink->width = MIPI_CSIS_DEF_PIX_WIDTH;
+	fmt_sink->height = MIPI_CSIS_DEF_PIX_HEIGHT;
+	fmt_sink->field = V4L2_FIELD_NONE;
+
+	fmt_sink->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	fmt_sink->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->quantization =
+		V4L2_MAP_QUANTIZATION_DEFAULT(false, fmt_sink->colorspace,
+					      fmt_sink->ycbcr_enc);
+
+	/*
+	 * When called from mipi_csis_subdev_init() to initialize the active
+	 * configuration, cfg is NULL, which indicates there's no source pad
+	 * configuration to set.
+	 */
+	if (!cfg)
+		return 0;
+
+	fmt_source = mipi_csis_get_format(state, cfg, which, CSIS_PAD_SOURCE);
+	*fmt_source = *fmt_sink;
+
+	return 0;
+}
+
+static int mipi_csis_get_fmt(struct v4l2_subdev *mipi_sd,
 			     struct v4l2_subdev_pad_config *cfg,
 			     struct v4l2_subdev_format *sdformat)
 {
 	struct csi_state *state = mipi_sd_to_csis_state(mipi_sd);
-	struct csis_pix_format const *csis_fmt;
 	struct v4l2_mbus_framefmt *fmt;
 
-	if (sdformat->pad >= CSIS_PADS_NUM)
-		return -EINVAL;
-
+	mutex_lock(&state->lock);
 	fmt = mipi_csis_get_format(state, cfg, sdformat->which, sdformat->pad);
+	sdformat->format = *fmt;
+	mutex_unlock(&state->lock);
 
-	mutex_lock(&state->lock);
-	if (sdformat->pad == CSIS_PAD_SOURCE) {
-		sdformat->format = *fmt;
-		goto unlock;
-	}
+	return 0;
+}
 
-	csis_fmt = mipi_csis_try_format(mipi_sd, &sdformat->format);
+static int mipi_csis_enum_mbus_code(struct v4l2_subdev *mipi_sd,
+				    struct v4l2_subdev_pad_config *cfg,
+				    struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct csi_state *state = mipi_sd_to_csis_state(mipi_sd);
 
-	sdformat->format = *fmt;
+	/*
+	 * The CSIS can't transcode in any way, the source format is identical
+	 * to the sink format.
+	 */
+	if (code->pad == CSIS_PAD_SOURCE) {
+		struct v4l2_mbus_framefmt *fmt;
 
-	if (csis_fmt && sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		state->csis_fmt = csis_fmt;
-	else
-		cfg->try_fmt = sdformat->format;
+		if (code->index > 0)
+			return -EINVAL;
 
-unlock:
-	mutex_unlock(&state->lock);
+		fmt = mipi_csis_get_format(state, cfg, code->which, code->pad);
+		code->code = fmt->code;
+		return 0;
+	}
+
+	if (code->pad != CSIS_PAD_SINK)
+		return -EINVAL;
+
+	if (code->index >= ARRAY_SIZE(mipi_csis_formats))
+		return -EINVAL;
+
+	code->code = mipi_csis_formats[code->index].code;
 
 	return 0;
 }
 
-static int mipi_csis_get_fmt(struct v4l2_subdev *mipi_sd,
+static int mipi_csis_set_fmt(struct v4l2_subdev *mipi_sd,
 			     struct v4l2_subdev_pad_config *cfg,
 			     struct v4l2_subdev_format *sdformat)
 {
 	struct csi_state *state = mipi_sd_to_csis_state(mipi_sd);
+	struct csis_pix_format const *csis_fmt;
 	struct v4l2_mbus_framefmt *fmt;
+	unsigned int align;
 
-	mutex_lock(&state->lock);
+	/*
+	 * The CSIS can't transcode in any way, the source format can't be
+	 * modified.
+	 */
+	if (sdformat->pad == CSIS_PAD_SOURCE)
+		return mipi_csis_get_fmt(mipi_sd, cfg, sdformat);
+
+	if (sdformat->pad != CSIS_PAD_SINK)
+		return -EINVAL;
 
 	fmt = mipi_csis_get_format(state, cfg, sdformat->which, sdformat->pad);
 
+	mutex_lock(&state->lock);
+
+	/* Validate the media bus code and clamp the size. */
+	csis_fmt = find_csis_format(sdformat->format.code);
+	if (!csis_fmt)
+		csis_fmt = &mipi_csis_formats[0];
+
+	fmt->code = csis_fmt->code;
+	fmt->width = sdformat->format.width;
+	fmt->height = sdformat->format.height;
+
+	/*
+	 * The total number of bits per line must be a multiple of 8. We thus
+	 * need to align the width for formats that are not multiples of 8
+	 * bits.
+	 */
+	switch (csis_fmt->width % 8) {
+	case 0:
+		align = 1;
+		break;
+	case 4:
+		align = 2;
+		break;
+	case 2:
+	case 6:
+		align = 4;
+		break;
+	case 1:
+	case 3:
+	case 5:
+	case 7:
+		align = 8;
+		break;
+	}
+
+	v4l_bound_align_image(&fmt->width, 1, CSIS_MAX_PIX_WIDTH, align,
+			      &fmt->height, 1, CSIS_MAX_PIX_HEIGHT, 1, 0);
+
 	sdformat->format = *fmt;
 
+	/* Propagate the format from sink to source. */
+	fmt = mipi_csis_get_format(state, cfg, sdformat->which,
+				   CSIS_PAD_SOURCE);
+	*fmt = sdformat->format;
+
+	/* Store the CSIS format descriptor for active formats. */
+	if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		state->csis_fmt = csis_fmt;
+
 	mutex_unlock(&state->lock);
 
 	return 0;
@@ -809,6 +913,7 @@ static const struct v4l2_subdev_video_ops mipi_csis_video_ops = {
 
 static const struct v4l2_subdev_pad_ops mipi_csis_pad_ops = {
 	.init_cfg		= mipi_csis_init_cfg,
+	.enum_mbus_code		= mipi_csis_enum_mbus_code,
 	.get_fmt		= mipi_csis_get_fmt,
 	.set_fmt		= mipi_csis_set_fmt,
 };
@@ -883,10 +988,7 @@ static int mipi_csis_subdev_init(struct v4l2_subdev *mipi_sd,
 	mipi_sd->dev = &pdev->dev;
 
 	state->csis_fmt = &mipi_csis_formats[0];
-	state->format_mbus.code = mipi_csis_formats[0].code;
-	state->format_mbus.width = MIPI_CSIS_DEF_PIX_WIDTH;
-	state->format_mbus.height = MIPI_CSIS_DEF_PIX_HEIGHT;
-	state->format_mbus.field = V4L2_FIELD_NONE;
+	mipi_csis_init_cfg(mipi_sd, NULL);
 
 	v4l2_set_subdevdata(mipi_sd, &pdev->dev);
 
diff --git a/drivers/staging/media/ipu3/Kconfig b/drivers/staging/media/ipu3/Kconfig
index 4b51c67eac88..3e9640523e50 100644
--- a/drivers/staging/media/ipu3/Kconfig
+++ b/drivers/staging/media/ipu3/Kconfig
@@ -2,8 +2,9 @@
 config VIDEO_IPU3_IMGU
 	tristate "Intel ipu3-imgu driver"
 	depends on PCI && VIDEO_V4L2
-	depends on MEDIA_CONTROLLER && VIDEO_V4L2_SUBDEV_API
 	depends on X86
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select IOMMU_IOVA
 	select VIDEOBUF2_DMA_SG
 	help
diff --git a/drivers/staging/media/ipu3/TODO b/drivers/staging/media/ipu3/TODO
index 52063b651810..4bcb665cb5f7 100644
--- a/drivers/staging/media/ipu3/TODO
+++ b/drivers/staging/media/ipu3/TODO
@@ -8,8 +8,6 @@ staging directory.
 - IPU3 driver documentation (Laurent)
   Comments on configuring v4l2 subdevs for CIO2 and ImgU.
 
-- Switch to yavta from v4l2n in driver docs.
-
 - Elaborate the functionality of different selection rectangles in driver
   documentation. This may require driver changes as well.
 
diff --git a/drivers/staging/media/ipu3/ipu3-css-params.c b/drivers/staging/media/ipu3/ipu3-css-params.c
index 4533dacad4be..fbd53d7c097c 100644
--- a/drivers/staging/media/ipu3/ipu3-css-params.c
+++ b/drivers/staging/media/ipu3/ipu3-css-params.c
@@ -49,14 +49,13 @@ imgu_css_scaler_setup_lut(unsigned int taps, unsigned int input_width,
 	int tap, phase, phase_sum_left, phase_sum_right;
 	int exponent = imgu_css_scaler_get_exp(output_width, input_width);
 	int mantissa = (1 << exponent) * output_width;
-	unsigned int phase_step;
+	unsigned int phase_step, phase_taps;
 
 	if (input_width == output_width) {
 		for (phase = 0; phase < IMGU_SCALER_PHASES; phase++) {
-			for (tap = 0; tap < taps; tap++) {
-				coeff_lut[phase * IMGU_SCALER_FILTER_TAPS + tap]
-					= 0;
-			}
+			phase_taps = phase * IMGU_SCALER_FILTER_TAPS;
+			for (tap = 0; tap < taps; tap++)
+				coeff_lut[phase_taps + tap] = 0;
 		}
 
 		info->phase_step = IMGU_SCALER_PHASES *
@@ -71,6 +70,7 @@ imgu_css_scaler_setup_lut(unsigned int taps, unsigned int input_width,
 	}
 
 	for (phase = 0; phase < IMGU_SCALER_PHASES; phase++) {
+		phase_taps = phase * IMGU_SCALER_FILTER_TAPS;
 		for (tap = 0; tap < taps; tap++) {
 			/* flip table to for convolution reverse indexing */
 			s64 coeff = coeffs[coeffs_size -
@@ -81,9 +81,7 @@ imgu_css_scaler_setup_lut(unsigned int taps, unsigned int input_width,
 			/* Add +"0.5" */
 			coeff += 1 << (IMGU_SCALER_COEFF_BITS - 1);
 			coeff >>= IMGU_SCALER_COEFF_BITS;
-
-			coeff_lut[phase * IMGU_SCALER_FILTER_TAPS + tap] =
-				coeff;
+			coeff_lut[phase_taps + tap] = coeff;
 		}
 	}
 
diff --git a/drivers/staging/media/ipu3/ipu3-css-pool.h b/drivers/staging/media/ipu3/ipu3-css-pool.h
index f4a60b41401b..a8ccd4f70320 100644
--- a/drivers/staging/media/ipu3/ipu3-css-pool.h
+++ b/drivers/staging/media/ipu3/ipu3-css-pool.h
@@ -15,14 +15,12 @@ struct imgu_device;
  * @size:		size of the buffer in bytes.
  * @vaddr:		kernel virtual address.
  * @daddr:		iova dma address to access IPU3.
- * @vma:		private, a pointer to &struct vm_struct,
- *			used for imgu_dmamap_free.
  */
 struct imgu_css_map {
 	size_t size;
 	void *vaddr;
 	dma_addr_t daddr;
-	struct vm_struct *vma;
+	struct page **pages;
 };
 
 /**
diff --git a/drivers/staging/media/ipu3/ipu3-dmamap.c b/drivers/staging/media/ipu3/ipu3-dmamap.c
index 7431322379f6..8a19b0024152 100644
--- a/drivers/staging/media/ipu3/ipu3-dmamap.c
+++ b/drivers/staging/media/ipu3/ipu3-dmamap.c
@@ -96,6 +96,7 @@ void *imgu_dmamap_alloc(struct imgu_device *imgu, struct imgu_css_map *map,
 	unsigned long shift = iova_shift(&imgu->iova_domain);
 	struct device *dev = &imgu->pci_dev->dev;
 	size_t size = PAGE_ALIGN(len);
+	int count = size >> PAGE_SHIFT;
 	struct page **pages;
 	dma_addr_t iovaddr;
 	struct iova *iova;
@@ -114,7 +115,7 @@ void *imgu_dmamap_alloc(struct imgu_device *imgu, struct imgu_css_map *map,
 
 	/* Call IOMMU driver to setup pgt */
 	iovaddr = iova_dma_addr(&imgu->iova_domain, iova);
-	for (i = 0; i < size / PAGE_SIZE; ++i) {
+	for (i = 0; i < count; ++i) {
 		rval = imgu_mmu_map(imgu->mmu, iovaddr,
 				    page_to_phys(pages[i]), PAGE_SIZE);
 		if (rval)
@@ -123,33 +124,23 @@ void *imgu_dmamap_alloc(struct imgu_device *imgu, struct imgu_css_map *map,
 		iovaddr += PAGE_SIZE;
 	}
 
-	/* Now grab a virtual region */
-	map->vma = __get_vm_area(size, VM_USERMAP, VMALLOC_START, VMALLOC_END);
-	if (!map->vma)
+	map->vaddr = vmap(pages, count, VM_USERMAP, PAGE_KERNEL);
+	if (!map->vaddr)
 		goto out_unmap;
 
-	map->vma->pages = pages;
-	/* And map it in KVA */
-	if (map_vm_area(map->vma, PAGE_KERNEL, pages))
-		goto out_vunmap;
-
+	map->pages = pages;
 	map->size = size;
 	map->daddr = iova_dma_addr(&imgu->iova_domain, iova);
-	map->vaddr = map->vma->addr;
 
 	dev_dbg(dev, "%s: allocated %zu @ IOVA %pad @ VA %p\n", __func__,
-		size, &map->daddr, map->vma->addr);
-
-	return map->vma->addr;
+		size, &map->daddr, map->vaddr);
 
-out_vunmap:
-	vunmap(map->vma->addr);
+	return map->vaddr;
 
 out_unmap:
 	imgu_dmamap_free_buffer(pages, size);
 	imgu_mmu_unmap(imgu->mmu, iova_dma_addr(&imgu->iova_domain, iova),
 		       i * PAGE_SIZE);
-	map->vma = NULL;
 
 out_free_iova:
 	__free_iova(&imgu->iova_domain, iova);
@@ -177,8 +168,6 @@ void imgu_dmamap_unmap(struct imgu_device *imgu, struct imgu_css_map *map)
  */
 void imgu_dmamap_free(struct imgu_device *imgu, struct imgu_css_map *map)
 {
-	struct vm_struct *area = map->vma;
-
 	dev_dbg(&imgu->pci_dev->dev, "%s: freeing %zu @ IOVA %pad @ VA %p\n",
 		__func__, map->size, &map->daddr, map->vaddr);
 
@@ -187,11 +176,8 @@ void imgu_dmamap_free(struct imgu_device *imgu, struct imgu_css_map *map)
 
 	imgu_dmamap_unmap(imgu, map);
 
-	if (WARN_ON(!area) || WARN_ON(!area->pages))
-		return;
-
-	imgu_dmamap_free_buffer(area->pages, map->size);
 	vunmap(map->vaddr);
+	imgu_dmamap_free_buffer(map->pages, map->size);
 	map->vaddr = NULL;
 }
 
diff --git a/drivers/staging/media/ipu3/ipu3-mmu.c b/drivers/staging/media/ipu3/ipu3-mmu.c
index 5f3ff964f3e7..cb9bf5fb29a5 100644
--- a/drivers/staging/media/ipu3/ipu3-mmu.c
+++ b/drivers/staging/media/ipu3/ipu3-mmu.c
@@ -174,8 +174,10 @@ static u32 *imgu_mmu_get_l2pt(struct imgu_mmu *mmu, u32 l1pt_idx)
 	spin_lock_irqsave(&mmu->lock, flags);
 
 	l2pt = mmu->l2pts[l1pt_idx];
-	if (l2pt)
-		goto done;
+	if (l2pt) {
+		spin_unlock_irqrestore(&mmu->lock, flags);
+		return l2pt;
+	}
 
 	spin_unlock_irqrestore(&mmu->lock, flags);
 
@@ -190,8 +192,9 @@ static u32 *imgu_mmu_get_l2pt(struct imgu_mmu *mmu, u32 l1pt_idx)
 
 	l2pt = mmu->l2pts[l1pt_idx];
 	if (l2pt) {
+		spin_unlock_irqrestore(&mmu->lock, flags);
 		imgu_mmu_free_page_table(new_l2pt);
-		goto done;
+		return l2pt;
 	}
 
 	l2pt = new_l2pt;
@@ -200,7 +203,6 @@ static u32 *imgu_mmu_get_l2pt(struct imgu_mmu *mmu, u32 l1pt_idx)
 	pteval = IPU3_ADDR2PTE(virt_to_phys(new_l2pt));
 	mmu->l1pt[l1pt_idx] = pteval;
 
-done:
 	spin_unlock_irqrestore(&mmu->lock, flags);
 	return l2pt;
 }
diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
index 09c8ede1457c..afbb4636e714 100644
--- a/drivers/staging/media/ipu3/ipu3-v4l2.c
+++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
@@ -152,7 +152,6 @@ static int imgu_subdev_set_fmt(struct v4l2_subdev *sd,
 	struct imgu_v4l2_subdev *imgu_sd = container_of(sd,
 							struct imgu_v4l2_subdev,
 							subdev);
-
 	struct v4l2_mbus_framefmt *mf;
 	u32 pad = fmt->pad;
 	unsigned int pipe = imgu_sd->pipe;
@@ -367,8 +366,10 @@ static void imgu_vb2_buf_queue(struct vb2_buffer *vb)
 
 	vb2_set_plane_payload(vb, 0, need_bytes);
 
+	mutex_lock(&imgu->streaming_lock);
 	if (imgu->streaming)
 		imgu_queue_buffers(imgu, false, node->pipe);
+	mutex_unlock(&imgu->streaming_lock);
 
 	dev_dbg(&imgu->pci_dev->dev, "%s for pipe %u node %u", __func__,
 		node->pipe, node->id);
@@ -468,10 +469,13 @@ static int imgu_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
 	dev_dbg(dev, "%s node name %s pipe %u id %u", __func__,
 		node->name, node->pipe, node->id);
 
+	mutex_lock(&imgu->streaming_lock);
 	if (imgu->streaming) {
 		r = -EBUSY;
+		mutex_unlock(&imgu->streaming_lock);
 		goto fail_return_bufs;
 	}
+	mutex_unlock(&imgu->streaming_lock);
 
 	if (!node->enabled) {
 		dev_err(dev, "IMGU node is not enabled");
@@ -485,7 +489,6 @@ static int imgu_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
 	if (r < 0)
 		goto fail_return_bufs;
 
-
 	if (!imgu_all_nodes_streaming(imgu, node))
 		return 0;
 
@@ -498,9 +501,11 @@ static int imgu_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	/* Start streaming of the whole pipeline now */
 	dev_dbg(dev, "IMGU streaming is ready to start");
+	mutex_lock(&imgu->streaming_lock);
 	r = imgu_s_stream(imgu, true);
 	if (!r)
 		imgu->streaming = true;
+	mutex_unlock(&imgu->streaming_lock);
 
 	return 0;
 
@@ -532,6 +537,7 @@ static void imgu_vb2_stop_streaming(struct vb2_queue *vq)
 		dev_err(&imgu->pci_dev->dev,
 			"failed to stop subdev streaming\n");
 
+	mutex_lock(&imgu->streaming_lock);
 	/* Was this the first node with streaming disabled? */
 	if (imgu->streaming && imgu_all_nodes_streaming(imgu, node)) {
 		/* Yes, really stop streaming now */
@@ -542,6 +548,8 @@ static void imgu_vb2_stop_streaming(struct vb2_queue *vq)
 	}
 
 	imgu_return_all_buffers(imgu, node, VB2_BUF_STATE_ERROR);
+	mutex_unlock(&imgu->streaming_lock);
+
 	media_pipeline_stop(&node->vdev.entity);
 }
 
@@ -1292,19 +1300,17 @@ static void imgu_v4l2_nodes_cleanup_pipe(struct imgu_device *imgu,
 
 static int imgu_v4l2_nodes_setup_pipe(struct imgu_device *imgu, int pipe)
 {
-	int i, r;
+	int i;
 
 	for (i = 0; i < IMGU_NODE_NUM; i++) {
-		r = imgu_v4l2_node_setup(imgu, pipe, i);
-		if (r)
-			goto cleanup;
-	}
+		int r = imgu_v4l2_node_setup(imgu, pipe, i);
 
+		if (r) {
+			imgu_v4l2_nodes_cleanup_pipe(imgu, pipe, i);
+			return r;
+		}
+	}
 	return 0;
-
-cleanup:
-	imgu_v4l2_nodes_cleanup_pipe(imgu, pipe, i);
-	return r;
 }
 
 static void imgu_v4l2_subdev_cleanup(struct imgu_device *imgu, unsigned int i)
diff --git a/drivers/staging/media/ipu3/ipu3.c b/drivers/staging/media/ipu3/ipu3.c
index 4d53aad31483..a25a997cfd7e 100644
--- a/drivers/staging/media/ipu3/ipu3.c
+++ b/drivers/staging/media/ipu3/ipu3.c
@@ -675,6 +675,7 @@ static int imgu_pci_probe(struct pci_dev *pci_dev,
 		return r;
 
 	mutex_init(&imgu->lock);
+	mutex_init(&imgu->streaming_lock);
 	atomic_set(&imgu->qbuf_barrier, 0);
 	init_waitqueue_head(&imgu->buf_drain_wq);
 
@@ -738,6 +739,7 @@ static int imgu_pci_probe(struct pci_dev *pci_dev,
 out_css_powerdown:
 	imgu_css_set_powerdown(&pci_dev->dev, imgu->base);
 out_mutex_destroy:
+	mutex_destroy(&imgu->streaming_lock);
 	mutex_destroy(&imgu->lock);
 
 	return r;
@@ -755,6 +757,7 @@ static void imgu_pci_remove(struct pci_dev *pci_dev)
 	imgu_css_set_powerdown(&pci_dev->dev, imgu->base);
 	imgu_dmamap_exit(imgu);
 	imgu_mmu_exit(imgu->mmu);
+	mutex_destroy(&imgu->streaming_lock);
 	mutex_destroy(&imgu->lock);
 }
 
diff --git a/drivers/staging/media/ipu3/ipu3.h b/drivers/staging/media/ipu3/ipu3.h
index 73b123b2b8a2..8cd6a0077d99 100644
--- a/drivers/staging/media/ipu3/ipu3.h
+++ b/drivers/staging/media/ipu3/ipu3.h
@@ -146,6 +146,10 @@ struct imgu_device {
 	 * vid_buf.list and css->queue
 	 */
 	struct mutex lock;
+
+	/* Lock to protect writes to streaming flag in this struct */
+	struct mutex streaming_lock;
+
 	/* Forbid streaming and buffer queuing during system suspend. */
 	atomic_t qbuf_barrier;
 	/* Indicate if system suspend take place while imgu is streaming. */
diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig
index 4dcbc5065821..6c254907a27b 100644
--- a/drivers/staging/media/omap4iss/Kconfig
+++ b/drivers/staging/media/omap4iss/Kconfig
@@ -2,8 +2,10 @@
 
 config VIDEO_OMAP4
 	tristate "OMAP 4 Camera support"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C
+	depends on VIDEO_V4L2  && I2C
 	depends on ARCH_OMAP4 || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select MFD_SYSCON
 	select VIDEOBUF2_DMA_CONTIG
 	help
diff --git a/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig b/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig
index bd0147624de1..fb74df829371 100644
--- a/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig
+++ b/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig
@@ -2,7 +2,7 @@
 
 config PHY_ROCKCHIP_DPHY_RX0
 	tristate "Rockchip MIPI Synopsys DPHY RX0 driver"
-	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	select GENERIC_PHY_MIPI_DPHY
 	select GENERIC_PHY
 	help
diff --git a/drivers/staging/media/rkisp1/Kconfig b/drivers/staging/media/rkisp1/Kconfig
index b859a493caba..41f5def9ea44 100644
--- a/drivers/staging/media/rkisp1/Kconfig
+++ b/drivers/staging/media/rkisp1/Kconfig
@@ -2,12 +2,14 @@
 
 config VIDEO_ROCKCHIP_ISP1
 	tristate "Rockchip Image Signal Processing v1 Unit driver"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && OF
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_DMA_CONTIG
 	select VIDEOBUF2_VMALLOC
 	select V4L2_FWNODE
-	select PHY_ROCKCHIP_DPHY_RX0
+	select GENERIC_PHY_MIPI_DPHY
 	default n
 	help
 	  Enable this to support the Image Signal Processing (ISP) module
diff --git a/drivers/staging/media/rkisp1/Makefile b/drivers/staging/media/rkisp1/Makefile
index 69ca59c7ef34..ab32a77db8f7 100644
--- a/drivers/staging/media/rkisp1/Makefile
+++ b/drivers/staging/media/rkisp1/Makefile
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
 obj-$(CONFIG_VIDEO_ROCKCHIP_ISP1) += rockchip-isp1.o
 rockchip-isp1-objs += 	rkisp1-capture.o \
 			rkisp1-common.o \
diff --git a/drivers/staging/media/rkisp1/TODO b/drivers/staging/media/rkisp1/TODO
index 0aa9877dd64a..c0cbec0a164d 100644
--- a/drivers/staging/media/rkisp1/TODO
+++ b/drivers/staging/media/rkisp1/TODO
@@ -1,12 +1,6 @@
-* Don't use v4l2_async_notifier_parse_fwnode_endpoints_by_port().
-e.g. isp_parse_of_endpoints in drivers/media/platform/omap3isp/isp.c
-cio2_parse_firmware in drivers/media/pci/intel/ipu3/ipu3-cio2.c.
 * Fix pad format size for statistics and parameters entities.
 * Use threaded interrupt for rkisp1_stats_isr(), remove work queue.
 * Fix checkpatch errors.
-* Make sure uapi structs have the same size and layout in 32 and 62 bits,
-and that there are no holes in the structures (pahole is a utility that
-can be used to test this).
 * Review and comment every lock
 * Handle quantization
 * Document rkisp1-common.h
diff --git a/drivers/staging/media/rkisp1/rkisp1-capture.c b/drivers/staging/media/rkisp1/rkisp1-capture.c
index 24fe6a7888aa..21496fb2c4da 100644
--- a/drivers/staging/media/rkisp1/rkisp1-capture.c
+++ b/drivers/staging/media/rkisp1/rkisp1-capture.c
@@ -52,7 +52,6 @@ enum rkisp1_plane {
  */
 struct rkisp1_capture_fmt_cfg {
 	u32 fourcc;
-	u8 fmt_type;
 	u8 uv_swap;
 	u32 write_format;
 	u32 output_format;
@@ -87,133 +86,106 @@ static const struct rkisp1_capture_fmt_cfg rkisp1_mp_fmts[] = {
 	/* yuv422 */
 	{
 		.fourcc = V4L2_PIX_FMT_YUYV,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUVINT,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YVYU,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUVINT,
 	}, {
 		.fourcc = V4L2_PIX_FMT_VYUY,
-		.fmt_type = RKISP1_FMT_YUV,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUVINT,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YUV422P,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_PLA_OR_RAW8,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV16,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_SPLA,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV61,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_SPLA,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YVU422M,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_PLA_OR_RAW8,
 	},
 	/* yuv420 */
 	{
 		.fourcc = V4L2_PIX_FMT_NV21,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_SPLA,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV12,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_SPLA,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV21M,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_SPLA,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV12M,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_SPLA,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YUV420,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_PLA_OR_RAW8,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YVU420,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_PLA_OR_RAW8,
 	},
 	/* yuv444 */
 	{
 		.fourcc = V4L2_PIX_FMT_YUV444M,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_PLA_OR_RAW8,
 	},
 	/* yuv400 */
 	{
 		.fourcc = V4L2_PIX_FMT_GREY,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUVINT,
 	},
 	/* raw */
 	{
 		.fourcc = V4L2_PIX_FMT_SRGGB8,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_PLA_OR_RAW8,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGRBG8,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_PLA_OR_RAW8,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGBRG8,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_PLA_OR_RAW8,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SBGGR8,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUV_PLA_OR_RAW8,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SRGGB10,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_RAW12,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGRBG10,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_RAW12,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGBRG10,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_RAW12,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SBGGR10,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_RAW12,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SRGGB12,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_RAW12,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGRBG12,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_RAW12,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SGBRG12,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_RAW12,
 	}, {
 		.fourcc = V4L2_PIX_FMT_SBGGR12,
-		.fmt_type = RKISP1_FMT_BAYER,
 		.write_format = RKISP1_MI_CTRL_MP_WRITE_RAW12,
 	},
 };
@@ -222,43 +194,36 @@ static const struct rkisp1_capture_fmt_cfg rkisp1_sp_fmts[] = {
 	/* yuv422 */
 	{
 		.fourcc = V4L2_PIX_FMT_YUYV,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_INT,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV422,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YVYU,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_INT,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV422,
 	}, {
 		.fourcc = V4L2_PIX_FMT_VYUY,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_INT,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV422,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YUV422P,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_PLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV422,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV16,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_SPLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV422,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV61,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_SPLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV422,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YVU422M,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_PLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV422,
@@ -266,37 +231,31 @@ static const struct rkisp1_capture_fmt_cfg rkisp1_sp_fmts[] = {
 	/* yuv420 */
 	{
 		.fourcc = V4L2_PIX_FMT_NV21,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_SPLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV420,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV12,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_SPLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV420,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV21M,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_SPLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV420,
 	}, {
 		.fourcc = V4L2_PIX_FMT_NV12M,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_SPLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV420,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YUV420,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_PLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV420,
 	}, {
 		.fourcc = V4L2_PIX_FMT_YVU420,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 1,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_PLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV420,
@@ -304,7 +263,6 @@ static const struct rkisp1_capture_fmt_cfg rkisp1_sp_fmts[] = {
 	/* yuv444 */
 	{
 		.fourcc = V4L2_PIX_FMT_YUV444M,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_PLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV444,
@@ -312,7 +270,6 @@ static const struct rkisp1_capture_fmt_cfg rkisp1_sp_fmts[] = {
 	/* yuv400 */
 	{
 		.fourcc = V4L2_PIX_FMT_GREY,
-		.fmt_type = RKISP1_FMT_YUV,
 		.uv_swap = 0,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_INT,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV400,
@@ -320,17 +277,14 @@ static const struct rkisp1_capture_fmt_cfg rkisp1_sp_fmts[] = {
 	/* rgb */
 	{
 		.fourcc = V4L2_PIX_FMT_RGB24,
-		.fmt_type = RKISP1_FMT_RGB,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_PLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_RGB888,
 	}, {
 		.fourcc = V4L2_PIX_FMT_RGB565,
-		.fmt_type = RKISP1_FMT_RGB,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_PLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_RGB565,
 	}, {
 		.fourcc = V4L2_PIX_FMT_BGR666,
-		.fmt_type = RKISP1_FMT_RGB,
 		.write_format = RKISP1_MI_CTRL_SP_WRITE_PLA,
 		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_RGB666,
 	},
@@ -429,11 +383,14 @@ static void rkisp1_mp_config(struct rkisp1_capture *cap)
 		     cap->config->mi.cr_size_init);
 
 	rkisp1_irq_frame_end_enable(cap);
-	if (cap->pix.cfg->uv_swap) {
-		reg = rkisp1_read(rkisp1, RKISP1_CIF_MI_XTD_FORMAT_CTRL);
 
-		reg = (reg & ~BIT(0)) |
-		      RKISP1_CIF_MI_XTD_FMT_CTRL_MP_CB_CR_SWAP;
+	/* set uv swapping for semiplanar formats */
+	if (cap->pix.info->comp_planes == 2) {
+		reg = rkisp1_read(rkisp1, RKISP1_CIF_MI_XTD_FORMAT_CTRL);
+		if (cap->pix.cfg->uv_swap)
+			reg |= RKISP1_CIF_MI_XTD_FMT_CTRL_MP_CB_CR_SWAP;
+		else
+			reg &= ~RKISP1_CIF_MI_XTD_FMT_CTRL_MP_CB_CR_SWAP;
 		rkisp1_write(rkisp1, reg, RKISP1_CIF_MI_XTD_FORMAT_CTRL);
 	}
 
@@ -453,7 +410,7 @@ static void rkisp1_sp_config(struct rkisp1_capture *cap)
 {
 	const struct v4l2_pix_format_mplane *pixm = &cap->pix.fmt;
 	struct rkisp1_device *rkisp1 = cap->rkisp1;
-	u32 mi_ctrl;
+	u32 mi_ctrl, reg;
 
 	rkisp1_write(rkisp1, rkisp1_pixfmt_comp_size(pixm, RKISP1_PLANE_Y),
 		     cap->config->mi.y_size_init);
@@ -467,11 +424,15 @@ static void rkisp1_sp_config(struct rkisp1_capture *cap)
 	rkisp1_write(rkisp1, cap->sp_y_stride, RKISP1_CIF_MI_SP_Y_LLENGTH);
 
 	rkisp1_irq_frame_end_enable(cap);
-	if (cap->pix.cfg->uv_swap) {
-		u32 reg = rkisp1_read(rkisp1, RKISP1_CIF_MI_XTD_FORMAT_CTRL);
 
-		rkisp1_write(rkisp1, reg & ~BIT(1),
-			     RKISP1_CIF_MI_XTD_FORMAT_CTRL);
+	/* set uv swapping for semiplanar formats */
+	if (cap->pix.info->comp_planes == 2) {
+		reg = rkisp1_read(rkisp1, RKISP1_CIF_MI_XTD_FORMAT_CTRL);
+		if (cap->pix.cfg->uv_swap)
+			reg |= RKISP1_CIF_MI_XTD_FMT_CTRL_SP_CB_CR_SWAP;
+		else
+			reg &= ~RKISP1_CIF_MI_XTD_FMT_CTRL_SP_CB_CR_SWAP;
+		rkisp1_write(rkisp1, reg, RKISP1_CIF_MI_XTD_FORMAT_CTRL);
 	}
 
 	rkisp1_mi_config_ctrl(cap);
@@ -504,13 +465,12 @@ static void rkisp1_sp_disable(struct rkisp1_capture *cap)
 
 static void rkisp1_mp_enable(struct rkisp1_capture *cap)
 {
-	const struct rkisp1_capture_fmt_cfg *isp_fmt = cap->pix.cfg;
 	u32 mi_ctrl;
 
 	rkisp1_mp_disable(cap);
 
 	mi_ctrl = rkisp1_read(cap->rkisp1, RKISP1_CIF_MI_CTRL);
-	if (isp_fmt->fmt_type == RKISP1_FMT_BAYER)
+	if (v4l2_is_format_bayer(cap->pix.info))
 		mi_ctrl |= RKISP1_CIF_MI_CTRL_RAW_ENABLE;
 	/* YUV */
 	else
@@ -778,6 +738,14 @@ static void rkisp1_vb2_buf_queue(struct vb2_buffer *vb)
 			rkisp1_pixfmt_comp_size(pixm, RKISP1_PLANE_CB);
 	}
 
+	/*
+	 * uv swap can be supported for planar formats by switching
+	 * the address of cb and cr
+	 */
+	if (cap->pix.info->comp_planes == 3 && cap->pix.cfg->uv_swap)
+		swap(ispbuf->buff_addr[RKISP1_PLANE_CR],
+		     ispbuf->buff_addr[RKISP1_PLANE_CB]);
+
 	spin_lock_irqsave(&cap->buf.lock, flags);
 
 	/*
@@ -927,6 +895,8 @@ static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
 	struct rkisp1_device *rkisp1 = cap->rkisp1;
 	int ret;
 
+	mutex_lock(&cap->rkisp1->stream_lock);
+
 	rkisp1_stream_stop(cap);
 	media_pipeline_stop(&node->vdev.entity);
 	ret = rkisp1_pipeline_sink_walk(&node->vdev.entity, NULL,
@@ -939,10 +909,12 @@ static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
 
 	v4l2_pipeline_pm_put(&node->vdev.entity);
 	ret = pm_runtime_put(rkisp1->dev);
-	if (ret)
+	if (ret < 0)
 		dev_err(rkisp1->dev, "power down failed error:%d\n", ret);
 
 	rkisp1_dummy_buf_destroy(cap);
+
+	mutex_unlock(&cap->rkisp1->stream_lock);
 }
 
 /*
@@ -987,12 +959,14 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
 	struct media_entity *entity = &cap->vnode.vdev.entity;
 	int ret;
 
+	mutex_lock(&cap->rkisp1->stream_lock);
+
 	ret = rkisp1_dummy_buf_create(cap);
 	if (ret)
 		goto err_ret_buffers;
 
 	ret = pm_runtime_get_sync(cap->rkisp1->dev);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(cap->rkisp1->dev, "power up failed %d\n", ret);
 		goto err_destroy_dummy;
 	}
@@ -1016,6 +990,8 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
 		goto err_pipe_disable;
 	}
 
+	mutex_unlock(&cap->rkisp1->stream_lock);
+
 	return 0;
 
 err_pipe_disable:
@@ -1029,6 +1005,7 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
 	rkisp1_dummy_buf_destroy(cap);
 err_ret_buffers:
 	rkisp1_return_all_buffers(cap, VB2_BUF_STATE_QUEUED);
+	mutex_unlock(&cap->rkisp1->stream_lock);
 
 	return ret;
 }
@@ -1260,7 +1237,7 @@ static int rkisp1_capture_link_validate(struct media_link *link)
 		return -EPIPE;
 	}
 
-	if (cap->pix.cfg->fmt_type != isp->src_fmt->fmt_type) {
+	if (cap->pix.info->pixel_enc != isp->src_fmt->pixel_enc) {
 		dev_err(cap->rkisp1->dev,
 			"format type mismatch in link '%s:%d->%s:%d'\n",
 			link->source->entity->name, link->source->index,
diff --git a/drivers/staging/media/rkisp1/rkisp1-common.h b/drivers/staging/media/rkisp1/rkisp1-common.h
index b291cc60de8e..0c4fe503adc9 100644
--- a/drivers/staging/media/rkisp1/rkisp1-common.h
+++ b/drivers/staging/media/rkisp1/rkisp1-common.h
@@ -52,13 +52,6 @@ enum rkisp1_stream_id {
 	RKISP1_SELFPATH,
 };
 
-enum rkisp1_fmt_pix_type {
-	RKISP1_FMT_YUV,
-	RKISP1_FMT_RGB,
-	RKISP1_FMT_BAYER,
-	RKISP1_FMT_JPEG,
-};
-
 enum rkisp1_fmt_raw_pat_type {
 	RKISP1_RAW_RGGB = 0,
 	RKISP1_RAW_GRBG,
@@ -80,8 +73,9 @@ enum rkisp1_isp_pad {
  */
 struct rkisp1_sensor_async {
 	struct v4l2_async_subdev asd;
-	struct v4l2_mbus_config mbus;
 	unsigned int lanes;
+	enum v4l2_mbus_type mbus_type;
+	unsigned int mbus_flags;
 	struct v4l2_subdev *sd;
 	struct v4l2_ctrl *pixel_rate_ctrl;
 	struct phy *dphy;
@@ -225,7 +219,7 @@ struct rkisp1_resizer {
 	struct media_pad pads[RKISP1_ISP_PAD_MAX];
 	struct v4l2_subdev_pad_config pad_cfg[RKISP1_ISP_PAD_MAX];
 	const struct rkisp1_rsz_config *config;
-	enum rkisp1_fmt_pix_type fmt_type;
+	enum v4l2_pixel_encoding pixel_enc;
 	struct mutex ops_lock;
 };
 
@@ -247,6 +241,7 @@ struct rkisp1_debug {
  * @rkisp1_capture: capture video device
  * @stats: ISP statistics output device
  * @params: ISP input parameters device
+ * @stream_lock: lock to serialize start/stop streaming in capture devices.
  */
 struct rkisp1_device {
 	void __iomem *base_addr;
@@ -266,6 +261,7 @@ struct rkisp1_device {
 	struct rkisp1_params params;
 	struct media_pipeline pipe;
 	struct vb2_alloc_ctx *alloc_ctx;
+	struct mutex stream_lock;
 	struct rkisp1_debug debug;
 };
 
@@ -278,7 +274,7 @@ struct rkisp1_device {
  */
 struct rkisp1_isp_mbus_info {
 	u32 mbus_code;
-	enum rkisp1_fmt_pix_type fmt_type;
+	enum v4l2_pixel_encoding pixel_enc;
 	u32 mipi_dt;
 	u32 yuv_seq;
 	u8 bus_width;
diff --git a/drivers/staging/media/rkisp1/rkisp1-dev.c b/drivers/staging/media/rkisp1/rkisp1-dev.c
index b1b3c058e957..9ac38bafb839 100644
--- a/drivers/staging/media/rkisp1/rkisp1-dev.c
+++ b/drivers/staging/media/rkisp1/rkisp1-dev.c
@@ -233,47 +233,6 @@ static int rkisp1_subdev_notifier_complete(struct v4l2_async_notifier *notifier)
 	return 0;
 }
 
-static int rkisp1_fwnode_parse(struct device *dev,
-			       struct v4l2_fwnode_endpoint *vep,
-			       struct v4l2_async_subdev *asd)
-{
-	struct rkisp1_sensor_async *s_asd =
-			container_of(asd, struct rkisp1_sensor_async, asd);
-
-	if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
-		dev_err(dev, "Only CSI2 bus type is currently supported\n");
-		return -EINVAL;
-	}
-
-	if (vep->base.port != 0) {
-		dev_err(dev, "The ISP has only port 0\n");
-		return -EINVAL;
-	}
-
-	s_asd->mbus.type = vep->bus_type;
-	s_asd->mbus.flags = vep->bus.mipi_csi2.flags;
-	s_asd->lanes = vep->bus.mipi_csi2.num_data_lanes;
-
-	switch (vep->bus.mipi_csi2.num_data_lanes) {
-	case 1:
-		s_asd->mbus.flags |= V4L2_MBUS_CSI2_1_LANE;
-		break;
-	case 2:
-		s_asd->mbus.flags |= V4L2_MBUS_CSI2_2_LANE;
-		break;
-	case 3:
-		s_asd->mbus.flags |= V4L2_MBUS_CSI2_3_LANE;
-		break;
-	case 4:
-		s_asd->mbus.flags |= V4L2_MBUS_CSI2_4_LANE;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static const struct v4l2_async_notifier_operations rkisp1_subdev_notifier_ops = {
 	.bound = rkisp1_subdev_notifier_bound,
 	.unbind = rkisp1_subdev_notifier_unbind,
@@ -283,23 +242,66 @@ static const struct v4l2_async_notifier_operations rkisp1_subdev_notifier_ops =
 static int rkisp1_subdev_notifier(struct rkisp1_device *rkisp1)
 {
 	struct v4l2_async_notifier *ntf = &rkisp1->notifier;
-	struct device *dev = rkisp1->dev;
+	unsigned int next_id = 0;
 	int ret;
 
 	v4l2_async_notifier_init(ntf);
 
-	ret = v4l2_async_notifier_parse_fwnode_endpoints_by_port(dev, ntf,
-					sizeof(struct rkisp1_sensor_async),
-					0, rkisp1_fwnode_parse);
-	if (ret)
-		return ret;
+	while (1) {
+		struct v4l2_fwnode_endpoint vep = {
+			.bus_type = V4L2_MBUS_CSI2_DPHY
+		};
+		struct rkisp1_sensor_async *rk_asd = NULL;
+		struct fwnode_handle *ep;
 
-	if (list_empty(&ntf->asd_list))
-		return -ENODEV;
+		ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(rkisp1->dev),
+			0, next_id, FWNODE_GRAPH_ENDPOINT_NEXT);
+		if (!ep)
+			break;
 
-	ntf->ops = &rkisp1_subdev_notifier_ops;
+		ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+		if (ret)
+			goto err_parse;
+
+		rk_asd = kzalloc(sizeof(*rk_asd), GFP_KERNEL);
+		if (!rk_asd) {
+			ret = -ENOMEM;
+			goto err_parse;
+		}
+
+		rk_asd->mbus_type = vep.bus_type;
+		rk_asd->mbus_flags = vep.bus.mipi_csi2.flags;
+		rk_asd->lanes = vep.bus.mipi_csi2.num_data_lanes;
+
+		ret = v4l2_async_notifier_add_fwnode_remote_subdev(ntf, ep,
+								   &rk_asd->asd);
+		if (ret)
+			goto err_parse;
+
+		dev_dbg(rkisp1->dev, "registered ep id %d with %d lanes\n",
+			vep.base.id, rk_asd->lanes);
+
+		next_id = vep.base.id + 1;
+
+		fwnode_handle_put(ep);
+
+		continue;
+err_parse:
+		fwnode_handle_put(ep);
+		kfree(rk_asd);
+		v4l2_async_notifier_cleanup(ntf);
+		return ret;
+	}
 
-	return v4l2_async_notifier_register(&rkisp1->v4l2_dev, ntf);
+	if (next_id == 0)
+		dev_dbg(rkisp1->dev, "no remote subdevice found\n");
+	ntf->ops = &rkisp1_subdev_notifier_ops;
+	ret = v4l2_async_notifier_register(&rkisp1->v4l2_dev, ntf);
+	if (ret) {
+		v4l2_async_notifier_cleanup(ntf);
+		return ret;
+	}
+	return 0;
 }
 
 /* ----------------------------------------------------------------------------
@@ -454,16 +456,17 @@ static void rkisp1_debug_init(struct rkisp1_device *rkisp1)
 
 static int rkisp1_probe(struct platform_device *pdev)
 {
-	struct device_node *node = pdev->dev.of_node;
 	const struct rkisp1_match_data *clk_data;
-	const struct of_device_id *match;
 	struct device *dev = &pdev->dev;
 	struct rkisp1_device *rkisp1;
 	struct v4l2_device *v4l2_dev;
 	unsigned int i;
 	int ret, irq;
 
-	match = of_match_node(rkisp1_of_match, node);
+	clk_data = of_device_get_match_data(&pdev->dev);
+	if (!clk_data)
+		return -ENODEV;
+
 	rkisp1 = devm_kzalloc(dev, sizeof(*rkisp1), GFP_KERNEL);
 	if (!rkisp1)
 		return -ENOMEM;
@@ -471,6 +474,8 @@ static int rkisp1_probe(struct platform_device *pdev)
 	dev_set_drvdata(dev, rkisp1);
 	rkisp1->dev = dev;
 
+	mutex_init(&rkisp1->stream_lock);
+
 	rkisp1->base_addr = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(rkisp1->base_addr))
 		return PTR_ERR(rkisp1->base_addr);
@@ -487,7 +492,6 @@ static int rkisp1_probe(struct platform_device *pdev)
 	}
 
 	rkisp1->irq = irq;
-	clk_data = match->data;
 
 	for (i = 0; i < clk_data->size; i++)
 		rkisp1->clks[i].id = clk_data->clks[i];
diff --git a/drivers/staging/media/rkisp1/rkisp1-isp.c b/drivers/staging/media/rkisp1/rkisp1-isp.c
index fa53f05e37d8..dc2b59a0160a 100644
--- a/drivers/staging/media/rkisp1/rkisp1-isp.c
+++ b/drivers/staging/media/rkisp1/rkisp1-isp.c
@@ -61,116 +61,116 @@
 static const struct rkisp1_isp_mbus_info rkisp1_isp_formats[] = {
 	{
 		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
-		.fmt_type	= RKISP1_FMT_YUV,
+		.pixel_enc	= V4L2_PIXEL_ENC_YUV,
 		.direction	= RKISP1_DIR_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SRGGB10_1X10,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW10,
 		.bayer_pat	= RKISP1_RAW_RGGB,
 		.bus_width	= 10,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SBGGR10_1X10,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW10,
 		.bayer_pat	= RKISP1_RAW_BGGR,
 		.bus_width	= 10,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SGBRG10_1X10,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW10,
 		.bayer_pat	= RKISP1_RAW_GBRG,
 		.bus_width	= 10,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SGRBG10_1X10,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW10,
 		.bayer_pat	= RKISP1_RAW_GRBG,
 		.bus_width	= 10,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SRGGB12_1X12,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW12,
 		.bayer_pat	= RKISP1_RAW_RGGB,
 		.bus_width	= 12,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SBGGR12_1X12,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW12,
 		.bayer_pat	= RKISP1_RAW_BGGR,
 		.bus_width	= 12,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SGBRG12_1X12,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW12,
 		.bayer_pat	= RKISP1_RAW_GBRG,
 		.bus_width	= 12,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SGRBG12_1X12,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW12,
 		.bayer_pat	= RKISP1_RAW_GRBG,
 		.bus_width	= 12,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SRGGB8_1X8,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW8,
 		.bayer_pat	= RKISP1_RAW_RGGB,
 		.bus_width	= 8,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SBGGR8_1X8,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW8,
 		.bayer_pat	= RKISP1_RAW_BGGR,
 		.bus_width	= 8,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SGBRG8_1X8,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW8,
 		.bayer_pat	= RKISP1_RAW_GBRG,
 		.bus_width	= 8,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_SGRBG8_1X8,
-		.fmt_type	= RKISP1_FMT_BAYER,
+		.pixel_enc	= V4L2_PIXEL_ENC_BAYER,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_RAW8,
 		.bayer_pat	= RKISP1_RAW_GRBG,
 		.bus_width	= 8,
 		.direction	= RKISP1_DIR_SINK_SRC,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_YUYV8_1X16,
-		.fmt_type	= RKISP1_FMT_YUV,
+		.pixel_enc	= V4L2_PIXEL_ENC_YUV,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_YUV422_8b,
 		.yuv_seq	= RKISP1_CIF_ISP_ACQ_PROP_YCBYCR,
 		.bus_width	= 16,
 		.direction	= RKISP1_DIR_SINK,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_YVYU8_1X16,
-		.fmt_type	= RKISP1_FMT_YUV,
+		.pixel_enc	= V4L2_PIXEL_ENC_YUV,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_YUV422_8b,
 		.yuv_seq	= RKISP1_CIF_ISP_ACQ_PROP_YCRYCB,
 		.bus_width	= 16,
 		.direction	= RKISP1_DIR_SINK,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_UYVY8_1X16,
-		.fmt_type	= RKISP1_FMT_YUV,
+		.pixel_enc	= V4L2_PIXEL_ENC_YUV,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_YUV422_8b,
 		.yuv_seq	= RKISP1_CIF_ISP_ACQ_PROP_CBYCRY,
 		.bus_width	= 16,
 		.direction	= RKISP1_DIR_SINK,
 	}, {
 		.mbus_code	= MEDIA_BUS_FMT_VYUY8_1X16,
-		.fmt_type	= RKISP1_FMT_YUV,
+		.pixel_enc	= V4L2_PIXEL_ENC_YUV,
 		.mipi_dt	= RKISP1_CIF_CSI2_DT_YUV422_8b,
 		.yuv_seq	= RKISP1_CIF_ISP_ACQ_PROP_CRYCBY,
 		.bus_width	= 16,
@@ -288,10 +288,10 @@ static int rkisp1_config_isp(struct rkisp1_device *rkisp1)
 					    RKISP1_ISP_PAD_SINK_VIDEO,
 					    V4L2_SUBDEV_FORMAT_ACTIVE);
 
-	if (sink_fmt->fmt_type == RKISP1_FMT_BAYER) {
+	if (sink_fmt->pixel_enc == V4L2_PIXEL_ENC_BAYER) {
 		acq_mult = 1;
-		if (src_fmt->fmt_type == RKISP1_FMT_BAYER) {
-			if (sensor->mbus.type == V4L2_MBUS_BT656)
+		if (src_fmt->pixel_enc == V4L2_PIXEL_ENC_BAYER) {
+			if (sensor->mbus_type == V4L2_MBUS_BT656)
 				isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_RAW_PICT_ITU656;
 			else
 				isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_RAW_PICT;
@@ -299,17 +299,17 @@ static int rkisp1_config_isp(struct rkisp1_device *rkisp1)
 			rkisp1_write(rkisp1, RKISP1_CIF_ISP_DEMOSAIC_TH(0xc),
 				     RKISP1_CIF_ISP_DEMOSAIC);
 
-			if (sensor->mbus.type == V4L2_MBUS_BT656)
+			if (sensor->mbus_type == V4L2_MBUS_BT656)
 				isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_BAYER_ITU656;
 			else
 				isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_BAYER_ITU601;
 		}
-	} else if (sink_fmt->fmt_type == RKISP1_FMT_YUV) {
+	} else if (sink_fmt->pixel_enc == V4L2_PIXEL_ENC_YUV) {
 		acq_mult = 2;
-		if (sensor->mbus.type == V4L2_MBUS_CSI2_DPHY) {
+		if (sensor->mbus_type == V4L2_MBUS_CSI2_DPHY) {
 			isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_ITU601;
 		} else {
-			if (sensor->mbus.type == V4L2_MBUS_BT656)
+			if (sensor->mbus_type == V4L2_MBUS_BT656)
 				isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_ITU656;
 			else
 				isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_ITU601;
@@ -319,17 +319,17 @@ static int rkisp1_config_isp(struct rkisp1_device *rkisp1)
 	}
 
 	/* Set up input acquisition properties */
-	if (sensor->mbus.type == V4L2_MBUS_BT656 ||
-	    sensor->mbus.type == V4L2_MBUS_PARALLEL) {
-		if (sensor->mbus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+	if (sensor->mbus_type == V4L2_MBUS_BT656 ||
+	    sensor->mbus_type == V4L2_MBUS_PARALLEL) {
+		if (sensor->mbus_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
 			signal = RKISP1_CIF_ISP_ACQ_PROP_POS_EDGE;
 	}
 
-	if (sensor->mbus.type == V4L2_MBUS_PARALLEL) {
-		if (sensor->mbus.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+	if (sensor->mbus_type == V4L2_MBUS_PARALLEL) {
+		if (sensor->mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
 			signal |= RKISP1_CIF_ISP_ACQ_PROP_VSYNC_LOW;
 
-		if (sensor->mbus.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+		if (sensor->mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
 			signal |= RKISP1_CIF_ISP_ACQ_PROP_HSYNC_LOW;
 	}
 
@@ -357,7 +357,7 @@ static int rkisp1_config_isp(struct rkisp1_device *rkisp1)
 		    RKISP1_CIF_ISP_PIC_SIZE_ERROR | RKISP1_CIF_ISP_FRAME_IN;
 	rkisp1_write(rkisp1, irq_mask, RKISP1_CIF_ISP_IMSC);
 
-	if (src_fmt->fmt_type == RKISP1_FMT_BAYER) {
+	if (src_fmt->pixel_enc == V4L2_PIXEL_ENC_BAYER) {
 		rkisp1_params_disable(&rkisp1->params);
 	} else {
 		struct v4l2_mbus_framefmt *src_frm;
@@ -401,29 +401,11 @@ static int rkisp1_config_dvp(struct rkisp1_device *rkisp1)
 static int rkisp1_config_mipi(struct rkisp1_device *rkisp1)
 {
 	const struct rkisp1_isp_mbus_info *sink_fmt = rkisp1->isp.sink_fmt;
-	unsigned int lanes;
+	unsigned int lanes = rkisp1->active_sensor->lanes;
 	u32 mipi_ctrl;
 
-	/*
-	 * rkisp1->active_sensor->mbus is set in isp or d-phy notifier_bound
-	 * function
-	 */
-	switch (rkisp1->active_sensor->mbus.flags & V4L2_MBUS_CSI2_LANES) {
-	case V4L2_MBUS_CSI2_4_LANE:
-		lanes = 4;
-		break;
-	case V4L2_MBUS_CSI2_3_LANE:
-		lanes = 3;
-		break;
-	case V4L2_MBUS_CSI2_2_LANE:
-		lanes = 2;
-		break;
-	case V4L2_MBUS_CSI2_1_LANE:
-		lanes = 1;
-		break;
-	default:
+	if (lanes < 1 || lanes > 4)
 		return -EINVAL;
-	}
 
 	mipi_ctrl = RKISP1_CIF_MIPI_CTRL_NUM_LANES(lanes - 1) |
 		    RKISP1_CIF_MIPI_CTRL_SHUTDOWNLANES(0xf) |
@@ -470,11 +452,11 @@ static int rkisp1_config_path(struct rkisp1_device *rkisp1)
 	u32 dpcl = rkisp1_read(rkisp1, RKISP1_CIF_VI_DPCL);
 	int ret = 0;
 
-	if (sensor->mbus.type == V4L2_MBUS_BT656 ||
-	    sensor->mbus.type == V4L2_MBUS_PARALLEL) {
+	if (sensor->mbus_type == V4L2_MBUS_BT656 ||
+	    sensor->mbus_type == V4L2_MBUS_PARALLEL) {
 		ret = rkisp1_config_dvp(rkisp1);
 		dpcl |= RKISP1_CIF_VI_DPCL_IF_SEL_PARALLEL;
-	} else if (sensor->mbus.type == V4L2_MBUS_CSI2_DPHY) {
+	} else if (sensor->mbus_type == V4L2_MBUS_CSI2_DPHY) {
 		ret = rkisp1_config_mipi(rkisp1);
 		dpcl |= RKISP1_CIF_VI_DPCL_IF_SEL_MIPI;
 	}
@@ -561,7 +543,7 @@ static void rkisp1_isp_start(struct rkisp1_device *rkisp1)
 	rkisp1_config_clk(rkisp1);
 
 	/* Activate MIPI */
-	if (sensor->mbus.type == V4L2_MBUS_CSI2_DPHY) {
+	if (sensor->mbus_type == V4L2_MBUS_CSI2_DPHY) {
 		val = rkisp1_read(rkisp1, RKISP1_CIF_MIPI_CTRL);
 		rkisp1_write(rkisp1, val | RKISP1_CIF_MIPI_CTRL_OUTPUT_ENA,
 			     RKISP1_CIF_MIPI_CTRL);
@@ -956,7 +938,7 @@ static int rkisp1_isp_s_stream(struct v4l2_subdev *sd, int enable)
 	rkisp1->active_sensor = container_of(sensor_sd->asd,
 					     struct rkisp1_sensor_async, asd);
 
-	if (rkisp1->active_sensor->mbus.type != V4L2_MBUS_CSI2_DPHY)
+	if (rkisp1->active_sensor->mbus_type != V4L2_MBUS_CSI2_DPHY)
 		return -EINVAL;
 
 	atomic_set(&rkisp1->isp.frame_sequence, -1);
diff --git a/drivers/staging/media/rkisp1/rkisp1-resizer.c b/drivers/staging/media/rkisp1/rkisp1-resizer.c
index 87799fbf0363..7b6b7ddd4169 100644
--- a/drivers/staging/media/rkisp1/rkisp1-resizer.c
+++ b/drivers/staging/media/rkisp1/rkisp1-resizer.c
@@ -14,7 +14,7 @@
 #define RKISP1_RSZ_MP_DEV_NAME	RKISP1_DRIVER_NAME "_resizer_mainpath"
 
 #define RKISP1_DEF_FMT MEDIA_BUS_FMT_YUYV8_2X8
-#define RKISP1_DEF_FMT_TYPE RKISP1_FMT_YUV
+#define RKISP1_DEF_PIXEL_ENC V4L2_PIXEL_ENC_YUV
 
 #define RKISP1_MBUS_FMT_HDIV 2
 #define RKISP1_MBUS_FMT_VDIV 1
@@ -371,7 +371,7 @@ static void rkisp1_rsz_config(struct rkisp1_resizer *rsz,
 	src_fmt = rkisp1_rsz_get_pad_fmt(rsz, NULL, RKISP1_RSZ_PAD_SRC,
 					 V4L2_SUBDEV_FORMAT_ACTIVE);
 
-	if (rsz->fmt_type == RKISP1_FMT_BAYER) {
+	if (rsz->pixel_enc == V4L2_PIXEL_ENC_BAYER) {
 		rkisp1_rsz_disable(rsz, when);
 		return;
 	}
@@ -384,7 +384,7 @@ static void rkisp1_rsz_config(struct rkisp1_resizer *rsz,
 	sink_c.width = sink_y.width / RKISP1_MBUS_FMT_HDIV;
 	sink_c.height = sink_y.height / RKISP1_MBUS_FMT_VDIV;
 
-	if (rsz->fmt_type == RKISP1_FMT_YUV) {
+	if (rsz->pixel_enc == V4L2_PIXEL_ENC_YUV) {
 		struct rkisp1_capture *cap =
 			&rsz->rkisp1->capture_devs[rsz->id];
 		const struct v4l2_format_info *pixfmt_info =
@@ -498,7 +498,7 @@ static void rkisp1_rsz_set_sink_crop(struct rkisp1_resizer *rsz,
 	mbus_info = rkisp1_isp_mbus_info_get(sink_fmt->code);
 
 	if (rsz->id == RKISP1_MAINPATH &&
-	    mbus_info->fmt_type == RKISP1_FMT_BAYER) {
+	    mbus_info->pixel_enc == V4L2_PIXEL_ENC_BAYER) {
 		sink_crop->left = 0;
 		sink_crop->top = 0;
 		sink_crop->width = sink_fmt->width;
@@ -537,7 +537,7 @@ static void rkisp1_rsz_set_sink_fmt(struct rkisp1_resizer *rsz,
 		mbus_info = rkisp1_isp_mbus_info_get(sink_fmt->code);
 	}
 	if (which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		rsz->fmt_type = mbus_info->fmt_type;
+		rsz->pixel_enc = mbus_info->pixel_enc;
 
 	/* Propagete to source pad */
 	src_fmt->code = sink_fmt->code;
@@ -722,7 +722,7 @@ static int rkisp1_rsz_register(struct rkisp1_resizer *rsz)
 	pads[RKISP1_RSZ_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE |
 					 MEDIA_PAD_FL_MUST_CONNECT;
 
-	rsz->fmt_type = RKISP1_DEF_FMT_TYPE;
+	rsz->pixel_enc = RKISP1_DEF_PIXEL_ENC;
 
 	mutex_init(&rsz->ops_lock);
 	ret = media_entity_pads_init(&sd->entity, 2, pads);
diff --git a/drivers/staging/media/rkvdec/Kconfig b/drivers/staging/media/rkvdec/Kconfig
new file mode 100644
index 000000000000..c02199b5e0fd
--- /dev/null
+++ b/drivers/staging/media/rkvdec/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+config VIDEO_ROCKCHIP_VDEC
+	tristate "Rockchip Video Decoder driver"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on VIDEO_DEV && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select MEDIA_CONTROLLER_REQUEST_API
+	select VIDEOBUF2_DMA_CONTIG
+	select VIDEOBUF2_VMALLOC
+	select V4L2_MEM2MEM_DEV
+	select V4L2_H264
+	help
+	  Support for the Rockchip Video Decoder IP present on Rockchip SoCs,
+	  which accelerates video decoding.
+	  To compile this driver as a module, choose M here: the module
+	  will be called rockchip-vdec.
diff --git a/drivers/staging/media/rkvdec/Makefile b/drivers/staging/media/rkvdec/Makefile
new file mode 100644
index 000000000000..c08fed0a39f9
--- /dev/null
+++ b/drivers/staging/media/rkvdec/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC) += rockchip-vdec.o
+
+rockchip-vdec-y += rkvdec.o rkvdec-h264.o
diff --git a/drivers/staging/media/rkvdec/TODO b/drivers/staging/media/rkvdec/TODO
new file mode 100644
index 000000000000..e0f0f12f0ac5
--- /dev/null
+++ b/drivers/staging/media/rkvdec/TODO
@@ -0,0 +1,11 @@
+* Support for VP9 is planned for this driver.
+
+  Given the V4L controls for those CODECs will be part of
+  the uABI, it will be required to have the driver in staging.
+
+  For this reason, we are keeping this driver in staging for now.
+
+* Evaluate introducing a helper to consolidate duplicated
+  code in rkvdec_request_validate and cedrus_request_validate.
+  The helper needs to the driver private data associated with
+  the videobuf2 queue, from a media request.
diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
new file mode 100644
index 000000000000..cd4980d06be7
--- /dev/null
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -0,0 +1,1156 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip Video Decoder H264 backend
+ *
+ * Copyright (C) 2019 Collabora, Ltd.
+ *	Boris Brezillon <boris.brezillon@collabora.com>
+ *
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd.
+ *	Jeffy Chen <jeffy.chen@rock-chips.com>
+ */
+
+#include <media/v4l2-h264.h>
+#include <media/v4l2-mem2mem.h>
+
+#include "rkvdec.h"
+#include "rkvdec-regs.h"
+
+/* Size with u32 units. */
+#define RKV_CABAC_INIT_BUFFER_SIZE	(3680 + 128)
+#define RKV_RPS_SIZE			((128 + 128) / 4)
+#define RKV_SCALING_LIST_SIZE		(6 * 16 + 6 * 64 + 128)
+#define RKV_ERROR_INFO_SIZE		(256 * 144 * 4)
+
+#define RKVDEC_NUM_REFLIST		3
+
+struct rkvdec_sps_pps_packet {
+	u32 info[8];
+};
+
+struct rkvdec_ps_field {
+	u16 offset;
+	u8 len;
+};
+
+#define PS_FIELD(_offset, _len) \
+	((struct rkvdec_ps_field){ _offset, _len })
+
+#define SEQ_PARAMETER_SET_ID				PS_FIELD(0, 4)
+#define PROFILE_IDC					PS_FIELD(4, 8)
+#define CONSTRAINT_SET3_FLAG				PS_FIELD(12, 1)
+#define CHROMA_FORMAT_IDC				PS_FIELD(13, 2)
+#define BIT_DEPTH_LUMA					PS_FIELD(15, 3)
+#define BIT_DEPTH_CHROMA				PS_FIELD(18, 3)
+#define QPPRIME_Y_ZERO_TRANSFORM_BYPASS_FLAG		PS_FIELD(21, 1)
+#define LOG2_MAX_FRAME_NUM_MINUS4			PS_FIELD(22, 4)
+#define MAX_NUM_REF_FRAMES				PS_FIELD(26, 5)
+#define PIC_ORDER_CNT_TYPE				PS_FIELD(31, 2)
+#define LOG2_MAX_PIC_ORDER_CNT_LSB_MINUS4		PS_FIELD(33, 4)
+#define DELTA_PIC_ORDER_ALWAYS_ZERO_FLAG		PS_FIELD(37, 1)
+#define PIC_WIDTH_IN_MBS				PS_FIELD(38, 9)
+#define PIC_HEIGHT_IN_MBS				PS_FIELD(47, 9)
+#define FRAME_MBS_ONLY_FLAG				PS_FIELD(56, 1)
+#define MB_ADAPTIVE_FRAME_FIELD_FLAG			PS_FIELD(57, 1)
+#define DIRECT_8X8_INFERENCE_FLAG			PS_FIELD(58, 1)
+#define MVC_EXTENSION_ENABLE				PS_FIELD(59, 1)
+#define NUM_VIEWS					PS_FIELD(60, 2)
+#define VIEW_ID(i)					PS_FIELD(62 + ((i) * 10), 10)
+#define NUM_ANCHOR_REFS_L(i)				PS_FIELD(82 + ((i) * 11), 1)
+#define ANCHOR_REF_L(i)				PS_FIELD(83 + ((i) * 11), 10)
+#define NUM_NON_ANCHOR_REFS_L(i)			PS_FIELD(104 + ((i) * 11), 1)
+#define NON_ANCHOR_REFS_L(i)				PS_FIELD(105 + ((i) * 11), 10)
+#define PIC_PARAMETER_SET_ID				PS_FIELD(128, 8)
+#define PPS_SEQ_PARAMETER_SET_ID			PS_FIELD(136, 5)
+#define ENTROPY_CODING_MODE_FLAG			PS_FIELD(141, 1)
+#define BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT_FLAG	PS_FIELD(142, 1)
+#define NUM_REF_IDX_L_DEFAULT_ACTIVE_MINUS1(i)		PS_FIELD(143 + ((i) * 5), 5)
+#define WEIGHTED_PRED_FLAG				PS_FIELD(153, 1)
+#define WEIGHTED_BIPRED_IDC				PS_FIELD(154, 2)
+#define PIC_INIT_QP_MINUS26				PS_FIELD(156, 7)
+#define PIC_INIT_QS_MINUS26				PS_FIELD(163, 6)
+#define CHROMA_QP_INDEX_OFFSET				PS_FIELD(169, 5)
+#define DEBLOCKING_FILTER_CONTROL_PRESENT_FLAG		PS_FIELD(174, 1)
+#define CONSTRAINED_INTRA_PRED_FLAG			PS_FIELD(175, 1)
+#define REDUNDANT_PIC_CNT_PRESENT			PS_FIELD(176, 1)
+#define TRANSFORM_8X8_MODE_FLAG			PS_FIELD(177, 1)
+#define SECOND_CHROMA_QP_INDEX_OFFSET			PS_FIELD(178, 5)
+#define SCALING_LIST_ENABLE_FLAG			PS_FIELD(183, 1)
+#define SCALING_LIST_ADDRESS				PS_FIELD(184, 32)
+#define IS_LONG_TERM(i)				PS_FIELD(216 + (i), 1)
+
+#define DPB_OFFS(i, j)					(288 + ((j) * 32 * 7) + ((i) * 7))
+#define DPB_INFO(i, j)					PS_FIELD(DPB_OFFS(i, j), 5)
+#define BOTTOM_FLAG(i, j)				PS_FIELD(DPB_OFFS(i, j) + 5, 1)
+#define VIEW_INDEX_OFF(i, j)				PS_FIELD(DPB_OFFS(i, j) + 6, 1)
+
+/* Data structure describing auxiliary buffer format. */
+struct rkvdec_h264_priv_tbl {
+	s8 cabac_table[4][464][2];
+	u8 scaling_list[RKV_SCALING_LIST_SIZE];
+	u32 rps[RKV_RPS_SIZE];
+	struct rkvdec_sps_pps_packet param_set[256];
+	u8 err_info[RKV_ERROR_INFO_SIZE];
+};
+
+#define RKVDEC_H264_DPB_SIZE 16
+
+struct rkvdec_h264_reflists {
+	u8 p[RKVDEC_H264_DPB_SIZE];
+	u8 b0[RKVDEC_H264_DPB_SIZE];
+	u8 b1[RKVDEC_H264_DPB_SIZE];
+	u8 num_valid;
+};
+
+struct rkvdec_h264_run {
+	struct rkvdec_run base;
+	const struct v4l2_ctrl_h264_decode_params *decode_params;
+	const struct v4l2_ctrl_h264_slice_params *slices_params;
+	const struct v4l2_ctrl_h264_sps *sps;
+	const struct v4l2_ctrl_h264_pps *pps;
+	const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
+};
+
+struct rkvdec_h264_ctx {
+	struct rkvdec_aux_buf priv_tbl;
+	struct rkvdec_h264_reflists reflists;
+};
+
+#define CABAC_ENTRY(ctxidx, idc0_m, idc0_n, idc1_m, idc1_n,		\
+	    idc2_m, idc2_n, intra_m, intra_n)			\
+	[0][(ctxidx)] = {idc0_m, idc0_n},			\
+	[1][(ctxidx)] = {idc1_m, idc1_n},			\
+	[2][(ctxidx)] = {idc2_m, idc2_n},			\
+	[3][(ctxidx)] = {intra_m, intra_n}
+
+/*
+ * Constant CABAC table.
+ * Built from the tables described in section '9.3.1.1 Initialisation process
+ * for context variables' of the H264 spec.
+ */
+static const s8 rkvdec_h264_cabac_table[4][464][2] = {
+	/* Table 9-12 – Values of variables m and n for ctxIdx from 0 to 10 */
+	CABAC_ENTRY(0, 20, -15, 20, -15, 20, -15, 20, -15),
+	CABAC_ENTRY(1, 2, 54, 2, 54, 2, 54, 2, 54),
+	CABAC_ENTRY(2, 3, 74, 3, 74, 3, 74, 3, 74),
+	CABAC_ENTRY(3, 20, -15, 20, -15, 20, -15, 20, -15),
+	CABAC_ENTRY(4, 2, 54, 2, 54, 2, 54, 2, 54),
+	CABAC_ENTRY(5, 3, 74, 3, 74, 3, 74, 3, 74),
+	CABAC_ENTRY(6, -28, 127, -28, 127, -28, 127, -28, 127),
+	CABAC_ENTRY(7, -23, 104, -23, 104, -23, 104, -23, 104),
+	CABAC_ENTRY(8, -6, 53, -6, 53, -6, 53, -6, 53),
+	CABAC_ENTRY(9, -1, 54, -1, 54, -1, 54, -1, 54),
+	CABAC_ENTRY(10, 7, 51, 7, 51, 7, 51, 7, 51),
+
+	/* Table 9-13 – Values of variables m and n for ctxIdx from 11 to 23 */
+	CABAC_ENTRY(11, 23, 33, 22, 25, 29, 16, 0, 0),
+	CABAC_ENTRY(12, 23, 2, 34, 0, 25, 0, 0, 0),
+	CABAC_ENTRY(13, 21, 0, 16, 0, 14, 0, 0, 0),
+	CABAC_ENTRY(14, 1, 9, -2, 9, -10, 51, 0, 0),
+	CABAC_ENTRY(15, 0, 49, 4, 41, -3, 62, 0, 0),
+	CABAC_ENTRY(16, -37, 118, -29, 118, -27, 99, 0, 0),
+	CABAC_ENTRY(17, 5, 57, 2, 65, 26, 16, 0, 0),
+	CABAC_ENTRY(18, -13, 78, -6, 71, -4, 85, 0, 0),
+	CABAC_ENTRY(19, -11, 65, -13, 79, -24, 102, 0, 0),
+	CABAC_ENTRY(20, 1, 62, 5, 52, 5, 57, 0, 0),
+	CABAC_ENTRY(21, 12, 49, 9, 50, 6, 57, 0, 0),
+	CABAC_ENTRY(22, -4, 73, -3, 70, -17, 73, 0, 0),
+	CABAC_ENTRY(23, 17, 50, 10, 54, 14, 57, 0, 0),
+
+	/* Table 9-14 – Values of variables m and n for ctxIdx from 24 to 39 */
+	CABAC_ENTRY(24, 18, 64, 26, 34, 20, 40, 0, 0),
+	CABAC_ENTRY(25, 9, 43, 19, 22, 20, 10, 0, 0),
+	CABAC_ENTRY(26, 29, 0, 40, 0, 29, 0, 0, 0),
+	CABAC_ENTRY(27, 26, 67, 57, 2, 54, 0, 0, 0),
+	CABAC_ENTRY(28, 16, 90, 41, 36, 37, 42, 0, 0),
+	CABAC_ENTRY(29, 9, 104, 26, 69, 12, 97, 0, 0),
+	CABAC_ENTRY(30, -46, 127, -45, 127, -32, 127, 0, 0),
+	CABAC_ENTRY(31, -20, 104, -15, 101, -22, 117, 0, 0),
+	CABAC_ENTRY(32, 1, 67, -4, 76, -2, 74, 0, 0),
+	CABAC_ENTRY(33, -13, 78, -6, 71, -4, 85, 0, 0),
+	CABAC_ENTRY(34, -11, 65, -13, 79, -24, 102, 0, 0),
+	CABAC_ENTRY(35, 1, 62, 5, 52, 5, 57, 0, 0),
+	CABAC_ENTRY(36, -6, 86, 6, 69, -6, 93, 0, 0),
+	CABAC_ENTRY(37, -17, 95, -13, 90, -14, 88, 0, 0),
+	CABAC_ENTRY(38, -6, 61, 0, 52, -6, 44, 0, 0),
+	CABAC_ENTRY(39, 9, 45, 8, 43, 4, 55, 0, 0),
+
+	/* Table 9-15 – Values of variables m and n for ctxIdx from 40 to 53 */
+	CABAC_ENTRY(40, -3, 69, -2, 69, -11, 89, 0, 0),
+	CABAC_ENTRY(41, -6, 81, -5, 82, -15, 103, 0, 0),
+	CABAC_ENTRY(42, -11, 96, -10, 96, -21, 116, 0, 0),
+	CABAC_ENTRY(43, 6, 55, 2, 59, 19, 57, 0, 0),
+	CABAC_ENTRY(44, 7, 67, 2, 75, 20, 58, 0, 0),
+	CABAC_ENTRY(45, -5, 86, -3, 87, 4, 84, 0, 0),
+	CABAC_ENTRY(46, 2, 88, -3, 100, 6, 96, 0, 0),
+	CABAC_ENTRY(47, 0, 58, 1, 56, 1, 63, 0, 0),
+	CABAC_ENTRY(48, -3, 76, -3, 74, -5, 85, 0, 0),
+	CABAC_ENTRY(49, -10, 94, -6, 85, -13, 106, 0, 0),
+	CABAC_ENTRY(50, 5, 54, 0, 59, 5, 63, 0, 0),
+	CABAC_ENTRY(51, 4, 69, -3, 81, 6, 75, 0, 0),
+	CABAC_ENTRY(52, -3, 81, -7, 86, -3, 90, 0, 0),
+	CABAC_ENTRY(53, 0, 88, -5, 95, -1, 101, 0, 0),
+
+	/* Table 9-16 – Values of variables m and n for ctxIdx from 54 to 59 */
+	CABAC_ENTRY(54, -7, 67, -1, 66, 3, 55, 0, 0),
+	CABAC_ENTRY(55, -5, 74, -1, 77, -4, 79, 0, 0),
+	CABAC_ENTRY(56, -4, 74, 1, 70, -2, 75, 0, 0),
+	CABAC_ENTRY(57, -5, 80, -2, 86, -12, 97, 0, 0),
+	CABAC_ENTRY(58, -7, 72, -5, 72, -7, 50, 0, 0),
+	CABAC_ENTRY(59, 1, 58, 0, 61, 1, 60, 0, 0),
+
+	/* Table 9-17 – Values of variables m and n for ctxIdx from 60 to 69 */
+	CABAC_ENTRY(60, 0, 41, 0, 41, 0, 41, 0, 41),
+	CABAC_ENTRY(61, 0, 63, 0, 63, 0, 63, 0, 63),
+	CABAC_ENTRY(62, 0, 63, 0, 63, 0, 63, 0, 63),
+	CABAC_ENTRY(63, 0, 63, 0, 63, 0, 63, 0, 63),
+	CABAC_ENTRY(64, -9, 83, -9, 83, -9, 83, -9, 83),
+	CABAC_ENTRY(65, 4, 86, 4, 86, 4, 86, 4, 86),
+	CABAC_ENTRY(66, 0, 97, 0, 97, 0, 97, 0, 97),
+	CABAC_ENTRY(67, -7, 72, -7, 72, -7, 72, -7, 72),
+	CABAC_ENTRY(68, 13, 41, 13, 41, 13, 41, 13, 41),
+	CABAC_ENTRY(69, 3, 62, 3, 62, 3, 62, 3, 62),
+
+	/* Table 9-18 – Values of variables m and n for ctxIdx from 70 to 104 */
+	CABAC_ENTRY(70, 0, 45, 13, 15, 7, 34, 0, 11),
+	CABAC_ENTRY(71, -4, 78, 7, 51, -9, 88, 1, 55),
+	CABAC_ENTRY(72, -3, 96, 2, 80, -20, 127, 0, 69),
+	CABAC_ENTRY(73, -27, 126, -39, 127, -36, 127, -17, 127),
+	CABAC_ENTRY(74, -28, 98, -18, 91, -17, 91, -13, 102),
+	CABAC_ENTRY(75, -25, 101, -17, 96, -14, 95, 0, 82),
+	CABAC_ENTRY(76, -23, 67, -26, 81, -25, 84, -7, 74),
+	CABAC_ENTRY(77, -28, 82, -35, 98, -25, 86, -21, 107),
+	CABAC_ENTRY(78, -20, 94, -24, 102, -12, 89, -27, 127),
+	CABAC_ENTRY(79, -16, 83, -23, 97, -17, 91, -31, 127),
+	CABAC_ENTRY(80, -22, 110, -27, 119, -31, 127, -24, 127),
+	CABAC_ENTRY(81, -21, 91, -24, 99, -14, 76, -18, 95),
+	CABAC_ENTRY(82, -18, 102, -21, 110, -18, 103, -27, 127),
+	CABAC_ENTRY(83, -13, 93, -18, 102, -13, 90, -21, 114),
+	CABAC_ENTRY(84, -29, 127, -36, 127, -37, 127, -30, 127),
+	CABAC_ENTRY(85, -7, 92, 0, 80, 11, 80, -17, 123),
+	CABAC_ENTRY(86, -5, 89, -5, 89, 5, 76, -12, 115),
+	CABAC_ENTRY(87, -7, 96, -7, 94, 2, 84, -16, 122),
+	CABAC_ENTRY(88, -13, 108, -4, 92, 5, 78, -11, 115),
+	CABAC_ENTRY(89, -3, 46, 0, 39, -6, 55, -12, 63),
+	CABAC_ENTRY(90, -1, 65, 0, 65, 4, 61, -2, 68),
+	CABAC_ENTRY(91, -1, 57, -15, 84, -14, 83, -15, 84),
+	CABAC_ENTRY(92, -9, 93, -35, 127, -37, 127, -13, 104),
+	CABAC_ENTRY(93, -3, 74, -2, 73, -5, 79, -3, 70),
+	CABAC_ENTRY(94, -9, 92, -12, 104, -11, 104, -8, 93),
+	CABAC_ENTRY(95, -8, 87, -9, 91, -11, 91, -10, 90),
+	CABAC_ENTRY(96, -23, 126, -31, 127, -30, 127, -30, 127),
+	CABAC_ENTRY(97, 5, 54, 3, 55, 0, 65, -1, 74),
+	CABAC_ENTRY(98, 6, 60, 7, 56, -2, 79, -6, 97),
+	CABAC_ENTRY(99, 6, 59, 7, 55, 0, 72, -7, 91),
+	CABAC_ENTRY(100, 6, 69, 8, 61, -4, 92, -20, 127),
+	CABAC_ENTRY(101, -1, 48, -3, 53, -6, 56, -4, 56),
+	CABAC_ENTRY(102, 0, 68, 0, 68, 3, 68, -5, 82),
+	CABAC_ENTRY(103, -4, 69, -7, 74, -8, 71, -7, 76),
+	CABAC_ENTRY(104, -8, 88, -9, 88, -13, 98, -22, 125),
+
+	/* Table 9-19 – Values of variables m and n for ctxIdx from 105 to 165 */
+	CABAC_ENTRY(105, -2, 85, -13, 103, -4, 86, -7, 93),
+	CABAC_ENTRY(106, -6, 78, -13, 91, -12, 88, -11, 87),
+	CABAC_ENTRY(107, -1, 75, -9, 89, -5, 82, -3, 77),
+	CABAC_ENTRY(108, -7, 77, -14, 92, -3, 72, -5, 71),
+	CABAC_ENTRY(109, 2, 54, -8, 76, -4, 67, -4, 63),
+	CABAC_ENTRY(110, 5, 50, -12, 87, -8, 72, -4, 68),
+	CABAC_ENTRY(111, -3, 68, -23, 110, -16, 89, -12, 84),
+	CABAC_ENTRY(112, 1, 50, -24, 105, -9, 69, -7, 62),
+	CABAC_ENTRY(113, 6, 42, -10, 78, -1, 59, -7, 65),
+	CABAC_ENTRY(114, -4, 81, -20, 112, 5, 66, 8, 61),
+	CABAC_ENTRY(115, 1, 63, -17, 99, 4, 57, 5, 56),
+	CABAC_ENTRY(116, -4, 70, -78, 127, -4, 71, -2, 66),
+	CABAC_ENTRY(117, 0, 67, -70, 127, -2, 71, 1, 64),
+	CABAC_ENTRY(118, 2, 57, -50, 127, 2, 58, 0, 61),
+	CABAC_ENTRY(119, -2, 76, -46, 127, -1, 74, -2, 78),
+	CABAC_ENTRY(120, 11, 35, -4, 66, -4, 44, 1, 50),
+	CABAC_ENTRY(121, 4, 64, -5, 78, -1, 69, 7, 52),
+	CABAC_ENTRY(122, 1, 61, -4, 71, 0, 62, 10, 35),
+	CABAC_ENTRY(123, 11, 35, -8, 72, -7, 51, 0, 44),
+	CABAC_ENTRY(124, 18, 25, 2, 59, -4, 47, 11, 38),
+	CABAC_ENTRY(125, 12, 24, -1, 55, -6, 42, 1, 45),
+	CABAC_ENTRY(126, 13, 29, -7, 70, -3, 41, 0, 46),
+	CABAC_ENTRY(127, 13, 36, -6, 75, -6, 53, 5, 44),
+	CABAC_ENTRY(128, -10, 93, -8, 89, 8, 76, 31, 17),
+	CABAC_ENTRY(129, -7, 73, -34, 119, -9, 78, 1, 51),
+	CABAC_ENTRY(130, -2, 73, -3, 75, -11, 83, 7, 50),
+	CABAC_ENTRY(131, 13, 46, 32, 20, 9, 52, 28, 19),
+	CABAC_ENTRY(132, 9, 49, 30, 22, 0, 67, 16, 33),
+	CABAC_ENTRY(133, -7, 100, -44, 127, -5, 90, 14, 62),
+	CABAC_ENTRY(134, 9, 53, 0, 54, 1, 67, -13, 108),
+	CABAC_ENTRY(135, 2, 53, -5, 61, -15, 72, -15, 100),
+	CABAC_ENTRY(136, 5, 53, 0, 58, -5, 75, -13, 101),
+	CABAC_ENTRY(137, -2, 61, -1, 60, -8, 80, -13, 91),
+	CABAC_ENTRY(138, 0, 56, -3, 61, -21, 83, -12, 94),
+	CABAC_ENTRY(139, 0, 56, -8, 67, -21, 64, -10, 88),
+	CABAC_ENTRY(140, -13, 63, -25, 84, -13, 31, -16, 84),
+	CABAC_ENTRY(141, -5, 60, -14, 74, -25, 64, -10, 86),
+	CABAC_ENTRY(142, -1, 62, -5, 65, -29, 94, -7, 83),
+	CABAC_ENTRY(143, 4, 57, 5, 52, 9, 75, -13, 87),
+	CABAC_ENTRY(144, -6, 69, 2, 57, 17, 63, -19, 94),
+	CABAC_ENTRY(145, 4, 57, 0, 61, -8, 74, 1, 70),
+	CABAC_ENTRY(146, 14, 39, -9, 69, -5, 35, 0, 72),
+	CABAC_ENTRY(147, 4, 51, -11, 70, -2, 27, -5, 74),
+	CABAC_ENTRY(148, 13, 68, 18, 55, 13, 91, 18, 59),
+	CABAC_ENTRY(149, 3, 64, -4, 71, 3, 65, -8, 102),
+	CABAC_ENTRY(150, 1, 61, 0, 58, -7, 69, -15, 100),
+	CABAC_ENTRY(151, 9, 63, 7, 61, 8, 77, 0, 95),
+	CABAC_ENTRY(152, 7, 50, 9, 41, -10, 66, -4, 75),
+	CABAC_ENTRY(153, 16, 39, 18, 25, 3, 62, 2, 72),
+	CABAC_ENTRY(154, 5, 44, 9, 32, -3, 68, -11, 75),
+	CABAC_ENTRY(155, 4, 52, 5, 43, -20, 81, -3, 71),
+	CABAC_ENTRY(156, 11, 48, 9, 47, 0, 30, 15, 46),
+	CABAC_ENTRY(157, -5, 60, 0, 44, 1, 7, -13, 69),
+	CABAC_ENTRY(158, -1, 59, 0, 51, -3, 23, 0, 62),
+	CABAC_ENTRY(159, 0, 59, 2, 46, -21, 74, 0, 65),
+	CABAC_ENTRY(160, 22, 33, 19, 38, 16, 66, 21, 37),
+	CABAC_ENTRY(161, 5, 44, -4, 66, -23, 124, -15, 72),
+	CABAC_ENTRY(162, 14, 43, 15, 38, 17, 37, 9, 57),
+	CABAC_ENTRY(163, -1, 78, 12, 42, 44, -18, 16, 54),
+	CABAC_ENTRY(164, 0, 60, 9, 34, 50, -34, 0, 62),
+	CABAC_ENTRY(165, 9, 69, 0, 89, -22, 127, 12, 72),
+
+	/* Table 9-20 – Values of variables m and n for ctxIdx from 166 to 226 */
+	CABAC_ENTRY(166, 11, 28, 4, 45, 4, 39, 24, 0),
+	CABAC_ENTRY(167, 2, 40, 10, 28, 0, 42, 15, 9),
+	CABAC_ENTRY(168, 3, 44, 10, 31, 7, 34, 8, 25),
+	CABAC_ENTRY(169, 0, 49, 33, -11, 11, 29, 13, 18),
+	CABAC_ENTRY(170, 0, 46, 52, -43, 8, 31, 15, 9),
+	CABAC_ENTRY(171, 2, 44, 18, 15, 6, 37, 13, 19),
+	CABAC_ENTRY(172, 2, 51, 28, 0, 7, 42, 10, 37),
+	CABAC_ENTRY(173, 0, 47, 35, -22, 3, 40, 12, 18),
+	CABAC_ENTRY(174, 4, 39, 38, -25, 8, 33, 6, 29),
+	CABAC_ENTRY(175, 2, 62, 34, 0, 13, 43, 20, 33),
+	CABAC_ENTRY(176, 6, 46, 39, -18, 13, 36, 15, 30),
+	CABAC_ENTRY(177, 0, 54, 32, -12, 4, 47, 4, 45),
+	CABAC_ENTRY(178, 3, 54, 102, -94, 3, 55, 1, 58),
+	CABAC_ENTRY(179, 2, 58, 0, 0, 2, 58, 0, 62),
+	CABAC_ENTRY(180, 4, 63, 56, -15, 6, 60, 7, 61),
+	CABAC_ENTRY(181, 6, 51, 33, -4, 8, 44, 12, 38),
+	CABAC_ENTRY(182, 6, 57, 29, 10, 11, 44, 11, 45),
+	CABAC_ENTRY(183, 7, 53, 37, -5, 14, 42, 15, 39),
+	CABAC_ENTRY(184, 6, 52, 51, -29, 7, 48, 11, 42),
+	CABAC_ENTRY(185, 6, 55, 39, -9, 4, 56, 13, 44),
+	CABAC_ENTRY(186, 11, 45, 52, -34, 4, 52, 16, 45),
+	CABAC_ENTRY(187, 14, 36, 69, -58, 13, 37, 12, 41),
+	CABAC_ENTRY(188, 8, 53, 67, -63, 9, 49, 10, 49),
+	CABAC_ENTRY(189, -1, 82, 44, -5, 19, 58, 30, 34),
+	CABAC_ENTRY(190, 7, 55, 32, 7, 10, 48, 18, 42),
+	CABAC_ENTRY(191, -3, 78, 55, -29, 12, 45, 10, 55),
+	CABAC_ENTRY(192, 15, 46, 32, 1, 0, 69, 17, 51),
+	CABAC_ENTRY(193, 22, 31, 0, 0, 20, 33, 17, 46),
+	CABAC_ENTRY(194, -1, 84, 27, 36, 8, 63, 0, 89),
+	CABAC_ENTRY(195, 25, 7, 33, -25, 35, -18, 26, -19),
+	CABAC_ENTRY(196, 30, -7, 34, -30, 33, -25, 22, -17),
+	CABAC_ENTRY(197, 28, 3, 36, -28, 28, -3, 26, -17),
+	CABAC_ENTRY(198, 28, 4, 38, -28, 24, 10, 30, -25),
+	CABAC_ENTRY(199, 32, 0, 38, -27, 27, 0, 28, -20),
+	CABAC_ENTRY(200, 34, -1, 34, -18, 34, -14, 33, -23),
+	CABAC_ENTRY(201, 30, 6, 35, -16, 52, -44, 37, -27),
+	CABAC_ENTRY(202, 30, 6, 34, -14, 39, -24, 33, -23),
+	CABAC_ENTRY(203, 32, 9, 32, -8, 19, 17, 40, -28),
+	CABAC_ENTRY(204, 31, 19, 37, -6, 31, 25, 38, -17),
+	CABAC_ENTRY(205, 26, 27, 35, 0, 36, 29, 33, -11),
+	CABAC_ENTRY(206, 26, 30, 30, 10, 24, 33, 40, -15),
+	CABAC_ENTRY(207, 37, 20, 28, 18, 34, 15, 41, -6),
+	CABAC_ENTRY(208, 28, 34, 26, 25, 30, 20, 38, 1),
+	CABAC_ENTRY(209, 17, 70, 29, 41, 22, 73, 41, 17),
+	CABAC_ENTRY(210, 1, 67, 0, 75, 20, 34, 30, -6),
+	CABAC_ENTRY(211, 5, 59, 2, 72, 19, 31, 27, 3),
+	CABAC_ENTRY(212, 9, 67, 8, 77, 27, 44, 26, 22),
+	CABAC_ENTRY(213, 16, 30, 14, 35, 19, 16, 37, -16),
+	CABAC_ENTRY(214, 18, 32, 18, 31, 15, 36, 35, -4),
+	CABAC_ENTRY(215, 18, 35, 17, 35, 15, 36, 38, -8),
+	CABAC_ENTRY(216, 22, 29, 21, 30, 21, 28, 38, -3),
+	CABAC_ENTRY(217, 24, 31, 17, 45, 25, 21, 37, 3),
+	CABAC_ENTRY(218, 23, 38, 20, 42, 30, 20, 38, 5),
+	CABAC_ENTRY(219, 18, 43, 18, 45, 31, 12, 42, 0),
+	CABAC_ENTRY(220, 20, 41, 27, 26, 27, 16, 35, 16),
+	CABAC_ENTRY(221, 11, 63, 16, 54, 24, 42, 39, 22),
+	CABAC_ENTRY(222, 9, 59, 7, 66, 0, 93, 14, 48),
+	CABAC_ENTRY(223, 9, 64, 16, 56, 14, 56, 27, 37),
+	CABAC_ENTRY(224, -1, 94, 11, 73, 15, 57, 21, 60),
+	CABAC_ENTRY(225, -2, 89, 10, 67, 26, 38, 12, 68),
+	CABAC_ENTRY(226, -9, 108, -10, 116, -24, 127, 2, 97),
+
+	/* Table 9-21 – Values of variables m and n for ctxIdx from 227 to 275 */
+	CABAC_ENTRY(227, -6, 76, -23, 112, -24, 115, -3, 71),
+	CABAC_ENTRY(228, -2, 44, -15, 71, -22, 82, -6, 42),
+	CABAC_ENTRY(229, 0, 45, -7, 61, -9, 62, -5, 50),
+	CABAC_ENTRY(230, 0, 52, 0, 53, 0, 53, -3, 54),
+	CABAC_ENTRY(231, -3, 64, -5, 66, 0, 59, -2, 62),
+	CABAC_ENTRY(232, -2, 59, -11, 77, -14, 85, 0, 58),
+	CABAC_ENTRY(233, -4, 70, -9, 80, -13, 89, 1, 63),
+	CABAC_ENTRY(234, -4, 75, -9, 84, -13, 94, -2, 72),
+	CABAC_ENTRY(235, -8, 82, -10, 87, -11, 92, -1, 74),
+	CABAC_ENTRY(236, -17, 102, -34, 127, -29, 127, -9, 91),
+	CABAC_ENTRY(237, -9, 77, -21, 101, -21, 100, -5, 67),
+	CABAC_ENTRY(238, 3, 24, -3, 39, -14, 57, -5, 27),
+	CABAC_ENTRY(239, 0, 42, -5, 53, -12, 67, -3, 39),
+	CABAC_ENTRY(240, 0, 48, -7, 61, -11, 71, -2, 44),
+	CABAC_ENTRY(241, 0, 55, -11, 75, -10, 77, 0, 46),
+	CABAC_ENTRY(242, -6, 59, -15, 77, -21, 85, -16, 64),
+	CABAC_ENTRY(243, -7, 71, -17, 91, -16, 88, -8, 68),
+	CABAC_ENTRY(244, -12, 83, -25, 107, -23, 104, -10, 78),
+	CABAC_ENTRY(245, -11, 87, -25, 111, -15, 98, -6, 77),
+	CABAC_ENTRY(246, -30, 119, -28, 122, -37, 127, -10, 86),
+	CABAC_ENTRY(247, 1, 58, -11, 76, -10, 82, -12, 92),
+	CABAC_ENTRY(248, -3, 29, -10, 44, -8, 48, -15, 55),
+	CABAC_ENTRY(249, -1, 36, -10, 52, -8, 61, -10, 60),
+	CABAC_ENTRY(250, 1, 38, -10, 57, -8, 66, -6, 62),
+	CABAC_ENTRY(251, 2, 43, -9, 58, -7, 70, -4, 65),
+	CABAC_ENTRY(252, -6, 55, -16, 72, -14, 75, -12, 73),
+	CABAC_ENTRY(253, 0, 58, -7, 69, -10, 79, -8, 76),
+	CABAC_ENTRY(254, 0, 64, -4, 69, -9, 83, -7, 80),
+	CABAC_ENTRY(255, -3, 74, -5, 74, -12, 92, -9, 88),
+	CABAC_ENTRY(256, -10, 90, -9, 86, -18, 108, -17, 110),
+	CABAC_ENTRY(257, 0, 70, 2, 66, -4, 79, -11, 97),
+	CABAC_ENTRY(258, -4, 29, -9, 34, -22, 69, -20, 84),
+	CABAC_ENTRY(259, 5, 31, 1, 32, -16, 75, -11, 79),
+	CABAC_ENTRY(260, 7, 42, 11, 31, -2, 58, -6, 73),
+	CABAC_ENTRY(261, 1, 59, 5, 52, 1, 58, -4, 74),
+	CABAC_ENTRY(262, -2, 58, -2, 55, -13, 78, -13, 86),
+	CABAC_ENTRY(263, -3, 72, -2, 67, -9, 83, -13, 96),
+	CABAC_ENTRY(264, -3, 81, 0, 73, -4, 81, -11, 97),
+	CABAC_ENTRY(265, -11, 97, -8, 89, -13, 99, -19, 117),
+	CABAC_ENTRY(266, 0, 58, 3, 52, -13, 81, -8, 78),
+	CABAC_ENTRY(267, 8, 5, 7, 4, -6, 38, -5, 33),
+	CABAC_ENTRY(268, 10, 14, 10, 8, -13, 62, -4, 48),
+	CABAC_ENTRY(269, 14, 18, 17, 8, -6, 58, -2, 53),
+	CABAC_ENTRY(270, 13, 27, 16, 19, -2, 59, -3, 62),
+	CABAC_ENTRY(271, 2, 40, 3, 37, -16, 73, -13, 71),
+	CABAC_ENTRY(272, 0, 58, -1, 61, -10, 76, -10, 79),
+	CABAC_ENTRY(273, -3, 70, -5, 73, -13, 86, -12, 86),
+	CABAC_ENTRY(274, -6, 79, -1, 70, -9, 83, -13, 90),
+	CABAC_ENTRY(275, -8, 85, -4, 78, -10, 87, -14, 97),
+
+	/* Table 9-22 – Values of variables m and n for ctxIdx from 277 to 337 */
+	CABAC_ENTRY(277, -13, 106, -21, 126, -22, 127, -6, 93),
+	CABAC_ENTRY(278, -16, 106, -23, 124, -25, 127, -6, 84),
+	CABAC_ENTRY(279, -10, 87, -20, 110, -25, 120, -8, 79),
+	CABAC_ENTRY(280, -21, 114, -26, 126, -27, 127, 0, 66),
+	CABAC_ENTRY(281, -18, 110, -25, 124, -19, 114, -1, 71),
+	CABAC_ENTRY(282, -14, 98, -17, 105, -23, 117, 0, 62),
+	CABAC_ENTRY(283, -22, 110, -27, 121, -25, 118, -2, 60),
+	CABAC_ENTRY(284, -21, 106, -27, 117, -26, 117, -2, 59),
+	CABAC_ENTRY(285, -18, 103, -17, 102, -24, 113, -5, 75),
+	CABAC_ENTRY(286, -21, 107, -26, 117, -28, 118, -3, 62),
+	CABAC_ENTRY(287, -23, 108, -27, 116, -31, 120, -4, 58),
+	CABAC_ENTRY(288, -26, 112, -33, 122, -37, 124, -9, 66),
+	CABAC_ENTRY(289, -10, 96, -10, 95, -10, 94, -1, 79),
+	CABAC_ENTRY(290, -12, 95, -14, 100, -15, 102, 0, 71),
+	CABAC_ENTRY(291, -5, 91, -8, 95, -10, 99, 3, 68),
+	CABAC_ENTRY(292, -9, 93, -17, 111, -13, 106, 10, 44),
+	CABAC_ENTRY(293, -22, 94, -28, 114, -50, 127, -7, 62),
+	CABAC_ENTRY(294, -5, 86, -6, 89, -5, 92, 15, 36),
+	CABAC_ENTRY(295, 9, 67, -2, 80, 17, 57, 14, 40),
+	CABAC_ENTRY(296, -4, 80, -4, 82, -5, 86, 16, 27),
+	CABAC_ENTRY(297, -10, 85, -9, 85, -13, 94, 12, 29),
+	CABAC_ENTRY(298, -1, 70, -8, 81, -12, 91, 1, 44),
+	CABAC_ENTRY(299, 7, 60, -1, 72, -2, 77, 20, 36),
+	CABAC_ENTRY(300, 9, 58, 5, 64, 0, 71, 18, 32),
+	CABAC_ENTRY(301, 5, 61, 1, 67, -1, 73, 5, 42),
+	CABAC_ENTRY(302, 12, 50, 9, 56, 4, 64, 1, 48),
+	CABAC_ENTRY(303, 15, 50, 0, 69, -7, 81, 10, 62),
+	CABAC_ENTRY(304, 18, 49, 1, 69, 5, 64, 17, 46),
+	CABAC_ENTRY(305, 17, 54, 7, 69, 15, 57, 9, 64),
+	CABAC_ENTRY(306, 10, 41, -7, 69, 1, 67, -12, 104),
+	CABAC_ENTRY(307, 7, 46, -6, 67, 0, 68, -11, 97),
+	CABAC_ENTRY(308, -1, 51, -16, 77, -10, 67, -16, 96),
+	CABAC_ENTRY(309, 7, 49, -2, 64, 1, 68, -7, 88),
+	CABAC_ENTRY(310, 8, 52, 2, 61, 0, 77, -8, 85),
+	CABAC_ENTRY(311, 9, 41, -6, 67, 2, 64, -7, 85),
+	CABAC_ENTRY(312, 6, 47, -3, 64, 0, 68, -9, 85),
+	CABAC_ENTRY(313, 2, 55, 2, 57, -5, 78, -13, 88),
+	CABAC_ENTRY(314, 13, 41, -3, 65, 7, 55, 4, 66),
+	CABAC_ENTRY(315, 10, 44, -3, 66, 5, 59, -3, 77),
+	CABAC_ENTRY(316, 6, 50, 0, 62, 2, 65, -3, 76),
+	CABAC_ENTRY(317, 5, 53, 9, 51, 14, 54, -6, 76),
+	CABAC_ENTRY(318, 13, 49, -1, 66, 15, 44, 10, 58),
+	CABAC_ENTRY(319, 4, 63, -2, 71, 5, 60, -1, 76),
+	CABAC_ENTRY(320, 6, 64, -2, 75, 2, 70, -1, 83),
+	CABAC_ENTRY(321, -2, 69, -1, 70, -2, 76, -7, 99),
+	CABAC_ENTRY(322, -2, 59, -9, 72, -18, 86, -14, 95),
+	CABAC_ENTRY(323, 6, 70, 14, 60, 12, 70, 2, 95),
+	CABAC_ENTRY(324, 10, 44, 16, 37, 5, 64, 0, 76),
+	CABAC_ENTRY(325, 9, 31, 0, 47, -12, 70, -5, 74),
+	CABAC_ENTRY(326, 12, 43, 18, 35, 11, 55, 0, 70),
+	CABAC_ENTRY(327, 3, 53, 11, 37, 5, 56, -11, 75),
+	CABAC_ENTRY(328, 14, 34, 12, 41, 0, 69, 1, 68),
+	CABAC_ENTRY(329, 10, 38, 10, 41, 2, 65, 0, 65),
+	CABAC_ENTRY(330, -3, 52, 2, 48, -6, 74, -14, 73),
+	CABAC_ENTRY(331, 13, 40, 12, 41, 5, 54, 3, 62),
+	CABAC_ENTRY(332, 17, 32, 13, 41, 7, 54, 4, 62),
+	CABAC_ENTRY(333, 7, 44, 0, 59, -6, 76, -1, 68),
+	CABAC_ENTRY(334, 7, 38, 3, 50, -11, 82, -13, 75),
+	CABAC_ENTRY(335, 13, 50, 19, 40, -2, 77, 11, 55),
+	CABAC_ENTRY(336, 10, 57, 3, 66, -2, 77, 5, 64),
+	CABAC_ENTRY(337, 26, 43, 18, 50, 25, 42, 12, 70),
+
+	/* Table 9-23 – Values of variables m and n for ctxIdx from 338 to 398 */
+	CABAC_ENTRY(338, 14, 11, 19, -6, 17, -13, 15, 6),
+	CABAC_ENTRY(339, 11, 14, 18, -6, 16, -9, 6, 19),
+	CABAC_ENTRY(340, 9, 11, 14, 0, 17, -12, 7, 16),
+	CABAC_ENTRY(341, 18, 11, 26, -12, 27, -21, 12, 14),
+	CABAC_ENTRY(342, 21, 9, 31, -16, 37, -30, 18, 13),
+	CABAC_ENTRY(343, 23, -2, 33, -25, 41, -40, 13, 11),
+	CABAC_ENTRY(344, 32, -15, 33, -22, 42, -41, 13, 15),
+	CABAC_ENTRY(345, 32, -15, 37, -28, 48, -47, 15, 16),
+	CABAC_ENTRY(346, 34, -21, 39, -30, 39, -32, 12, 23),
+	CABAC_ENTRY(347, 39, -23, 42, -30, 46, -40, 13, 23),
+	CABAC_ENTRY(348, 42, -33, 47, -42, 52, -51, 15, 20),
+	CABAC_ENTRY(349, 41, -31, 45, -36, 46, -41, 14, 26),
+	CABAC_ENTRY(350, 46, -28, 49, -34, 52, -39, 14, 44),
+	CABAC_ENTRY(351, 38, -12, 41, -17, 43, -19, 17, 40),
+	CABAC_ENTRY(352, 21, 29, 32, 9, 32, 11, 17, 47),
+	CABAC_ENTRY(353, 45, -24, 69, -71, 61, -55, 24, 17),
+	CABAC_ENTRY(354, 53, -45, 63, -63, 56, -46, 21, 21),
+	CABAC_ENTRY(355, 48, -26, 66, -64, 62, -50, 25, 22),
+	CABAC_ENTRY(356, 65, -43, 77, -74, 81, -67, 31, 27),
+	CABAC_ENTRY(357, 43, -19, 54, -39, 45, -20, 22, 29),
+	CABAC_ENTRY(358, 39, -10, 52, -35, 35, -2, 19, 35),
+	CABAC_ENTRY(359, 30, 9, 41, -10, 28, 15, 14, 50),
+	CABAC_ENTRY(360, 18, 26, 36, 0, 34, 1, 10, 57),
+	CABAC_ENTRY(361, 20, 27, 40, -1, 39, 1, 7, 63),
+	CABAC_ENTRY(362, 0, 57, 30, 14, 30, 17, -2, 77),
+	CABAC_ENTRY(363, -14, 82, 28, 26, 20, 38, -4, 82),
+	CABAC_ENTRY(364, -5, 75, 23, 37, 18, 45, -3, 94),
+	CABAC_ENTRY(365, -19, 97, 12, 55, 15, 54, 9, 69),
+	CABAC_ENTRY(366, -35, 125, 11, 65, 0, 79, -12, 109),
+	CABAC_ENTRY(367, 27, 0, 37, -33, 36, -16, 36, -35),
+	CABAC_ENTRY(368, 28, 0, 39, -36, 37, -14, 36, -34),
+	CABAC_ENTRY(369, 31, -4, 40, -37, 37, -17, 32, -26),
+	CABAC_ENTRY(370, 27, 6, 38, -30, 32, 1, 37, -30),
+	CABAC_ENTRY(371, 34, 8, 46, -33, 34, 15, 44, -32),
+	CABAC_ENTRY(372, 30, 10, 42, -30, 29, 15, 34, -18),
+	CABAC_ENTRY(373, 24, 22, 40, -24, 24, 25, 34, -15),
+	CABAC_ENTRY(374, 33, 19, 49, -29, 34, 22, 40, -15),
+	CABAC_ENTRY(375, 22, 32, 38, -12, 31, 16, 33, -7),
+	CABAC_ENTRY(376, 26, 31, 40, -10, 35, 18, 35, -5),
+	CABAC_ENTRY(377, 21, 41, 38, -3, 31, 28, 33, 0),
+	CABAC_ENTRY(378, 26, 44, 46, -5, 33, 41, 38, 2),
+	CABAC_ENTRY(379, 23, 47, 31, 20, 36, 28, 33, 13),
+	CABAC_ENTRY(380, 16, 65, 29, 30, 27, 47, 23, 35),
+	CABAC_ENTRY(381, 14, 71, 25, 44, 21, 62, 13, 58),
+	CABAC_ENTRY(382, 8, 60, 12, 48, 18, 31, 29, -3),
+	CABAC_ENTRY(383, 6, 63, 11, 49, 19, 26, 26, 0),
+	CABAC_ENTRY(384, 17, 65, 26, 45, 36, 24, 22, 30),
+	CABAC_ENTRY(385, 21, 24, 22, 22, 24, 23, 31, -7),
+	CABAC_ENTRY(386, 23, 20, 23, 22, 27, 16, 35, -15),
+	CABAC_ENTRY(387, 26, 23, 27, 21, 24, 30, 34, -3),
+	CABAC_ENTRY(388, 27, 32, 33, 20, 31, 29, 34, 3),
+	CABAC_ENTRY(389, 28, 23, 26, 28, 22, 41, 36, -1),
+	CABAC_ENTRY(390, 28, 24, 30, 24, 22, 42, 34, 5),
+	CABAC_ENTRY(391, 23, 40, 27, 34, 16, 60, 32, 11),
+	CABAC_ENTRY(392, 24, 32, 18, 42, 15, 52, 35, 5),
+	CABAC_ENTRY(393, 28, 29, 25, 39, 14, 60, 34, 12),
+	CABAC_ENTRY(394, 23, 42, 18, 50, 3, 78, 39, 11),
+	CABAC_ENTRY(395, 19, 57, 12, 70, -16, 123, 30, 29),
+	CABAC_ENTRY(396, 22, 53, 21, 54, 21, 53, 34, 26),
+	CABAC_ENTRY(397, 22, 61, 14, 71, 22, 56, 29, 39),
+	CABAC_ENTRY(398, 11, 86, 11, 83, 25, 61, 19, 66),
+
+	/* Values of variables m and n for ctxIdx from 399 to 463 (not documented) */
+	CABAC_ENTRY(399, 12, 40, 25, 32, 21, 33, 31, 21),
+	CABAC_ENTRY(400, 11, 51, 21, 49, 19, 50, 31, 31),
+	CABAC_ENTRY(401, 14, 59, 21, 54, 17, 61, 25, 50),
+	CABAC_ENTRY(402, -4, 79, -5, 85, -3, 78, -17, 120),
+	CABAC_ENTRY(403, -7, 71, -6, 81, -8, 74, -20, 112),
+	CABAC_ENTRY(404, -5, 69, -10, 77, -9, 72, -18, 114),
+	CABAC_ENTRY(405, -9, 70, -7, 81, -10, 72, -11, 85),
+	CABAC_ENTRY(406, -8, 66, -17, 80, -18, 75, -15, 92),
+	CABAC_ENTRY(407, -10, 68, -18, 73, -12, 71, -14, 89),
+	CABAC_ENTRY(408, -19, 73, -4, 74, -11, 63, -26, 71),
+	CABAC_ENTRY(409, -12, 69, -10, 83, -5, 70, -15, 81),
+	CABAC_ENTRY(410, -16, 70, -9, 71, -17, 75, -14, 80),
+	CABAC_ENTRY(411, -15, 67, -9, 67, -14, 72, 0, 68),
+	CABAC_ENTRY(412, -20, 62, -1, 61, -16, 67, -14, 70),
+	CABAC_ENTRY(413, -19, 70, -8, 66, -8, 53, -24, 56),
+	CABAC_ENTRY(414, -16, 66, -14, 66, -14, 59, -23, 68),
+	CABAC_ENTRY(415, -22, 65, 0, 59, -9, 52, -24, 50),
+	CABAC_ENTRY(416, -20, 63, 2, 59, -11, 68, -11, 74),
+	CABAC_ENTRY(417, 9, -2, 17, -10, 9, -2, 23, -13),
+	CABAC_ENTRY(418, 26, -9, 32, -13, 30, -10, 26, -13),
+	CABAC_ENTRY(419, 33, -9, 42, -9, 31, -4, 40, -15),
+	CABAC_ENTRY(420, 39, -7, 49, -5, 33, -1, 49, -14),
+	CABAC_ENTRY(421, 41, -2, 53, 0, 33, 7, 44, 3),
+	CABAC_ENTRY(422, 45, 3, 64, 3, 31, 12, 45, 6),
+	CABAC_ENTRY(423, 49, 9, 68, 10, 37, 23, 44, 34),
+	CABAC_ENTRY(424, 45, 27, 66, 27, 31, 38, 33, 54),
+	CABAC_ENTRY(425, 36, 59, 47, 57, 20, 64, 19, 82),
+	CABAC_ENTRY(426, -6, 66, -5, 71, -9, 71, -3, 75),
+	CABAC_ENTRY(427, -7, 35, 0, 24, -7, 37, -1, 23),
+	CABAC_ENTRY(428, -7, 42, -1, 36, -8, 44, 1, 34),
+	CABAC_ENTRY(429, -8, 45, -2, 42, -11, 49, 1, 43),
+	CABAC_ENTRY(430, -5, 48, -2, 52, -10, 56, 0, 54),
+	CABAC_ENTRY(431, -12, 56, -9, 57, -12, 59, -2, 55),
+	CABAC_ENTRY(432, -6, 60, -6, 63, -8, 63, 0, 61),
+	CABAC_ENTRY(433, -5, 62, -4, 65, -9, 67, 1, 64),
+	CABAC_ENTRY(434, -8, 66, -4, 67, -6, 68, 0, 68),
+	CABAC_ENTRY(435, -8, 76, -7, 82, -10, 79, -9, 92),
+	CABAC_ENTRY(436, -5, 85, -3, 81, -3, 78, -14, 106),
+	CABAC_ENTRY(437, -6, 81, -3, 76, -8, 74, -13, 97),
+	CABAC_ENTRY(438, -10, 77, -7, 72, -9, 72, -15, 90),
+	CABAC_ENTRY(439, -7, 81, -6, 78, -10, 72, -12, 90),
+	CABAC_ENTRY(440, -17, 80, -12, 72, -18, 75, -18, 88),
+	CABAC_ENTRY(441, -18, 73, -14, 68, -12, 71, -10, 73),
+	CABAC_ENTRY(442, -4, 74, -3, 70, -11, 63, -9, 79),
+	CABAC_ENTRY(443, -10, 83, -6, 76, -5, 70, -14, 86),
+	CABAC_ENTRY(444, -9, 71, -5, 66, -17, 75, -10, 73),
+	CABAC_ENTRY(445, -9, 67, -5, 62, -14, 72, -10, 70),
+	CABAC_ENTRY(446, -1, 61, 0, 57, -16, 67, -10, 69),
+	CABAC_ENTRY(447, -8, 66, -4, 61, -8, 53, -5, 66),
+	CABAC_ENTRY(448, -14, 66, -9, 60, -14, 59, -9, 64),
+	CABAC_ENTRY(449, 0, 59, 1, 54, -9, 52, -5, 58),
+	CABAC_ENTRY(450, 2, 59, 2, 58, -11, 68, 2, 59),
+	CABAC_ENTRY(451, 21, -13, 17, -10, 9, -2, 21, -10),
+	CABAC_ENTRY(452, 33, -14, 32, -13, 30, -10, 24, -11),
+	CABAC_ENTRY(453, 39, -7, 42, -9, 31, -4, 28, -8),
+	CABAC_ENTRY(454, 46, -2, 49, -5, 33, -1, 28, -1),
+	CABAC_ENTRY(455, 51, 2, 53, 0, 33, 7, 29, 3),
+	CABAC_ENTRY(456, 60, 6, 64, 3, 31, 12, 29, 9),
+	CABAC_ENTRY(457, 61, 17, 68, 10, 37, 23, 35, 20),
+	CABAC_ENTRY(458, 55, 34, 66, 27, 31, 38, 29, 36),
+	CABAC_ENTRY(459, 42, 62, 47, 57, 20, 64, 14, 67),
+};
+
+static void set_ps_field(u32 *buf, struct rkvdec_ps_field field, u32 value)
+{
+	u8 bit = field.offset % 32, word = field.offset / 32;
+	u64 mask = GENMASK_ULL(bit + field.len - 1, bit);
+	u64 val = ((u64)value << bit) & mask;
+
+	buf[word] &= ~mask;
+	buf[word] |= val;
+	if (bit + field.len > 32) {
+		buf[word + 1] &= ~(mask >> 32);
+		buf[word + 1] |= val >> 32;
+	}
+}
+
+static void assemble_hw_pps(struct rkvdec_ctx *ctx,
+			    struct rkvdec_h264_run *run)
+{
+	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
+	const struct v4l2_ctrl_h264_sps *sps = run->sps;
+	const struct v4l2_ctrl_h264_pps *pps = run->pps;
+	const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
+	const struct v4l2_h264_dpb_entry *dpb = dec_params->dpb;
+	struct rkvdec_h264_priv_tbl *priv_tbl = h264_ctx->priv_tbl.cpu;
+	struct rkvdec_sps_pps_packet *hw_ps;
+	dma_addr_t scaling_list_address;
+	u32 scaling_distance;
+	u32 i;
+
+	/*
+	 * HW read the SPS/PPS information from PPS packet index by PPS id.
+	 * offset from the base can be calculated by PPS_id * 32 (size per PPS
+	 * packet unit). so the driver copy SPS/PPS information to the exact PPS
+	 * packet unit for HW accessing.
+	 */
+	hw_ps = &priv_tbl->param_set[pps->pic_parameter_set_id];
+	memset(hw_ps, 0, sizeof(*hw_ps));
+
+#define WRITE_PPS(value, field) set_ps_field(hw_ps->info, field, value)
+	/* write sps */
+	WRITE_PPS(0xf, SEQ_PARAMETER_SET_ID);
+	WRITE_PPS(0xff, PROFILE_IDC);
+	WRITE_PPS(1, CONSTRAINT_SET3_FLAG);
+	WRITE_PPS(sps->chroma_format_idc, CHROMA_FORMAT_IDC);
+	WRITE_PPS(sps->bit_depth_luma_minus8 + 8, BIT_DEPTH_LUMA);
+	WRITE_PPS(sps->bit_depth_chroma_minus8 + 8, BIT_DEPTH_CHROMA);
+	WRITE_PPS(0, QPPRIME_Y_ZERO_TRANSFORM_BYPASS_FLAG);
+	WRITE_PPS(sps->log2_max_frame_num_minus4, LOG2_MAX_FRAME_NUM_MINUS4);
+	WRITE_PPS(sps->max_num_ref_frames, MAX_NUM_REF_FRAMES);
+	WRITE_PPS(sps->pic_order_cnt_type, PIC_ORDER_CNT_TYPE);
+	WRITE_PPS(sps->log2_max_pic_order_cnt_lsb_minus4,
+		  LOG2_MAX_PIC_ORDER_CNT_LSB_MINUS4);
+	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO),
+		  DELTA_PIC_ORDER_ALWAYS_ZERO_FLAG);
+	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.width, 16), PIC_WIDTH_IN_MBS);
+	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.height, 16), PIC_HEIGHT_IN_MBS);
+	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY),
+		  FRAME_MBS_ONLY_FLAG);
+	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD),
+		  MB_ADAPTIVE_FRAME_FIELD_FLAG);
+	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE),
+		  DIRECT_8X8_INFERENCE_FLAG);
+
+	/* write pps */
+	WRITE_PPS(0xff, PIC_PARAMETER_SET_ID);
+	WRITE_PPS(0x1f, PPS_SEQ_PARAMETER_SET_ID);
+	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE),
+		  ENTROPY_CODING_MODE_FLAG);
+	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT),
+		  BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT_FLAG);
+	WRITE_PPS(pps->num_ref_idx_l0_default_active_minus1,
+		  NUM_REF_IDX_L_DEFAULT_ACTIVE_MINUS1(0));
+	WRITE_PPS(pps->num_ref_idx_l1_default_active_minus1,
+		  NUM_REF_IDX_L_DEFAULT_ACTIVE_MINUS1(1));
+	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_WEIGHTED_PRED),
+		  WEIGHTED_PRED_FLAG);
+	WRITE_PPS(pps->weighted_bipred_idc, WEIGHTED_BIPRED_IDC);
+	WRITE_PPS(pps->pic_init_qp_minus26, PIC_INIT_QP_MINUS26);
+	WRITE_PPS(pps->pic_init_qs_minus26, PIC_INIT_QS_MINUS26);
+	WRITE_PPS(pps->chroma_qp_index_offset, CHROMA_QP_INDEX_OFFSET);
+	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT),
+		  DEBLOCKING_FILTER_CONTROL_PRESENT_FLAG);
+	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED),
+		  CONSTRAINED_INTRA_PRED_FLAG);
+	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT),
+		  REDUNDANT_PIC_CNT_PRESENT);
+	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE),
+		  TRANSFORM_8X8_MODE_FLAG);
+	WRITE_PPS(pps->second_chroma_qp_index_offset,
+		  SECOND_CHROMA_QP_INDEX_OFFSET);
+
+	/* always use the matrix sent from userspace */
+	WRITE_PPS(1, SCALING_LIST_ENABLE_FLAG);
+
+	scaling_distance = offsetof(struct rkvdec_h264_priv_tbl, scaling_list);
+	scaling_list_address = h264_ctx->priv_tbl.dma + scaling_distance;
+	WRITE_PPS(scaling_list_address, SCALING_LIST_ADDRESS);
+
+	for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
+		u32 is_longterm = 0;
+
+		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)
+			is_longterm = 1;
+
+		WRITE_PPS(is_longterm, IS_LONG_TERM(i));
+	}
+}
+
+static void assemble_hw_rps(struct rkvdec_ctx *ctx,
+			    struct rkvdec_h264_run *run)
+{
+	const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
+	const struct v4l2_ctrl_h264_slice_params *sl_params = &run->slices_params[0];
+	const struct v4l2_h264_dpb_entry *dpb = dec_params->dpb;
+	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
+	const struct v4l2_ctrl_h264_sps *sps = run->sps;
+	struct rkvdec_h264_priv_tbl *priv_tbl = h264_ctx->priv_tbl.cpu;
+	u32 max_frame_num = 1 << (sps->log2_max_frame_num_minus4 + 4);
+
+	u32 *hw_rps = priv_tbl->rps;
+	u32 i, j;
+	u16 *p = (u16 *)hw_rps;
+
+	memset(hw_rps, 0, sizeof(priv_tbl->rps));
+
+	/*
+	 * Assign an invalid pic_num if DPB entry at that position is inactive.
+	 * If we assign 0 in that position hardware will treat that as a real
+	 * reference picture with pic_num 0, triggering output picture
+	 * corruption.
+	 */
+	for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
+		if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE))
+			continue;
+
+		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM ||
+		    dpb[i].frame_num < sl_params->frame_num) {
+			p[i] = dpb[i].frame_num;
+			continue;
+		}
+
+		p[i] = dpb[i].frame_num - max_frame_num;
+	}
+
+	for (j = 0; j < RKVDEC_NUM_REFLIST; j++) {
+		for (i = 0; i < h264_ctx->reflists.num_valid; i++) {
+			u8 dpb_valid = 0;
+			u8 idx = 0;
+
+			switch (j) {
+			case 0:
+				idx = h264_ctx->reflists.p[i];
+				break;
+			case 1:
+				idx = h264_ctx->reflists.b0[i];
+				break;
+			case 2:
+				idx = h264_ctx->reflists.b1[i];
+				break;
+			}
+
+			if (idx >= ARRAY_SIZE(dec_params->dpb))
+				continue;
+			dpb_valid = !!(dpb[idx].flags &
+				       V4L2_H264_DPB_ENTRY_FLAG_ACTIVE);
+
+			set_ps_field(hw_rps, DPB_INFO(i, j),
+				     idx | dpb_valid << 4);
+		}
+	}
+}
+
+/*
+ * NOTE: The values in a scaling list are in zig-zag order, apply inverse
+ * scanning process to get the values in matrix order.
+ */
+static const u32 zig_zag_4x4[16] = {
+	0, 1, 4, 8, 5, 2, 3, 6, 9, 12, 13, 10, 7, 11, 14, 15
+};
+
+static const u32 zig_zag_8x8[64] = {
+	0,  1,  8, 16,  9,  2,  3, 10, 17, 24, 32, 25, 18, 11,  4,  5,
+	12, 19, 26, 33, 40, 48, 41, 34, 27, 20, 13,  6,  7, 14, 21, 28,
+	35, 42, 49, 56, 57, 50, 43, 36, 29, 22, 15, 23, 30, 37, 44, 51,
+	58, 59, 52, 45, 38, 31, 39, 46, 53, 60, 61, 54, 47, 55, 62, 63
+};
+
+static void reorder_scaling_list(struct rkvdec_ctx *ctx,
+				 struct rkvdec_h264_run *run)
+{
+	const struct v4l2_ctrl_h264_scaling_matrix *scaling = run->scaling_matrix;
+	const size_t num_list_4x4 = ARRAY_SIZE(scaling->scaling_list_4x4);
+	const size_t list_len_4x4 = ARRAY_SIZE(scaling->scaling_list_4x4[0]);
+	const size_t num_list_8x8 = ARRAY_SIZE(scaling->scaling_list_8x8);
+	const size_t list_len_8x8 = ARRAY_SIZE(scaling->scaling_list_8x8[0]);
+	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
+	struct rkvdec_h264_priv_tbl *tbl = h264_ctx->priv_tbl.cpu;
+	u8 *dst = tbl->scaling_list;
+	const u8 *src;
+	int i, j;
+
+	BUILD_BUG_ON(ARRAY_SIZE(zig_zag_4x4) != list_len_4x4);
+	BUILD_BUG_ON(ARRAY_SIZE(zig_zag_8x8) != list_len_8x8);
+	BUILD_BUG_ON(ARRAY_SIZE(tbl->scaling_list) <
+		     num_list_4x4 * list_len_4x4 +
+		     num_list_8x8 * list_len_8x8);
+
+	src = &scaling->scaling_list_4x4[0][0];
+	for (i = 0; i < num_list_4x4; ++i) {
+		for (j = 0; j < list_len_4x4; ++j)
+			dst[zig_zag_4x4[j]] = src[j];
+		src += list_len_4x4;
+		dst += list_len_4x4;
+	}
+
+	src = &scaling->scaling_list_8x8[0][0];
+	for (i = 0; i < num_list_8x8; ++i) {
+		for (j = 0; j < list_len_8x8; ++j)
+			dst[zig_zag_8x8[j]] = src[j];
+		src += list_len_8x8;
+		dst += list_len_8x8;
+	}
+}
+
+/*
+ * dpb poc related registers table
+ */
+static const u32 poc_reg_tbl_top_field[16] = {
+	RKVDEC_REG_H264_POC_REFER0(0),
+	RKVDEC_REG_H264_POC_REFER0(2),
+	RKVDEC_REG_H264_POC_REFER0(4),
+	RKVDEC_REG_H264_POC_REFER0(6),
+	RKVDEC_REG_H264_POC_REFER0(8),
+	RKVDEC_REG_H264_POC_REFER0(10),
+	RKVDEC_REG_H264_POC_REFER0(12),
+	RKVDEC_REG_H264_POC_REFER0(14),
+	RKVDEC_REG_H264_POC_REFER1(1),
+	RKVDEC_REG_H264_POC_REFER1(3),
+	RKVDEC_REG_H264_POC_REFER1(5),
+	RKVDEC_REG_H264_POC_REFER1(7),
+	RKVDEC_REG_H264_POC_REFER1(9),
+	RKVDEC_REG_H264_POC_REFER1(11),
+	RKVDEC_REG_H264_POC_REFER1(13),
+	RKVDEC_REG_H264_POC_REFER2(0)
+};
+
+static const u32 poc_reg_tbl_bottom_field[16] = {
+	RKVDEC_REG_H264_POC_REFER0(1),
+	RKVDEC_REG_H264_POC_REFER0(3),
+	RKVDEC_REG_H264_POC_REFER0(5),
+	RKVDEC_REG_H264_POC_REFER0(7),
+	RKVDEC_REG_H264_POC_REFER0(9),
+	RKVDEC_REG_H264_POC_REFER0(11),
+	RKVDEC_REG_H264_POC_REFER0(13),
+	RKVDEC_REG_H264_POC_REFER1(0),
+	RKVDEC_REG_H264_POC_REFER1(2),
+	RKVDEC_REG_H264_POC_REFER1(4),
+	RKVDEC_REG_H264_POC_REFER1(6),
+	RKVDEC_REG_H264_POC_REFER1(8),
+	RKVDEC_REG_H264_POC_REFER1(10),
+	RKVDEC_REG_H264_POC_REFER1(12),
+	RKVDEC_REG_H264_POC_REFER1(14),
+	RKVDEC_REG_H264_POC_REFER2(1)
+};
+
+static struct vb2_buffer *
+get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
+	    unsigned int dpb_idx)
+{
+	struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
+	const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
+	struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
+	int buf_idx = -1;
+
+	if (dpb[dpb_idx].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
+		buf_idx = vb2_find_timestamp(cap_q,
+					     dpb[dpb_idx].reference_ts, 0);
+
+	/*
+	 * If a DPB entry is unused or invalid, address of current destination
+	 * buffer is returned.
+	 */
+	if (buf_idx < 0)
+		return &run->base.bufs.dst->vb2_buf;
+
+	return vb2_get_buffer(cap_q, buf_idx);
+}
+
+static void config_registers(struct rkvdec_ctx *ctx,
+			     struct rkvdec_h264_run *run)
+{
+	struct rkvdec_dev *rkvdec = ctx->dev;
+	const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
+	const struct v4l2_ctrl_h264_sps *sps = run->sps;
+	const struct v4l2_h264_dpb_entry *dpb = dec_params->dpb;
+	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
+	dma_addr_t priv_start_addr = h264_ctx->priv_tbl.dma;
+	const struct v4l2_pix_format_mplane *dst_fmt;
+	struct vb2_v4l2_buffer *src_buf = run->base.bufs.src;
+	struct vb2_v4l2_buffer *dst_buf = run->base.bufs.dst;
+	const struct v4l2_format *f;
+	dma_addr_t rlc_addr;
+	dma_addr_t refer_addr;
+	u32 rlc_len;
+	u32 hor_virstride = 0;
+	u32 ver_virstride = 0;
+	u32 y_virstride = 0;
+	u32 yuv_virstride = 0;
+	u32 offset;
+	dma_addr_t dst_addr;
+	u32 reg, i;
+
+	reg = RKVDEC_MODE(RKVDEC_MODE_H264);
+	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_SYSCTRL);
+
+	f = &ctx->decoded_fmt;
+	dst_fmt = &f->fmt.pix_mp;
+	hor_virstride = (sps->bit_depth_luma_minus8 + 8) * dst_fmt->width / 8;
+	ver_virstride = round_up(dst_fmt->height, 16);
+	y_virstride = hor_virstride * ver_virstride;
+
+	if (sps->chroma_format_idc == 0)
+		yuv_virstride = y_virstride;
+	else if (sps->chroma_format_idc == 1)
+		yuv_virstride += y_virstride + y_virstride / 2;
+	else if (sps->chroma_format_idc == 2)
+		yuv_virstride += 2 * y_virstride;
+
+	reg = RKVDEC_Y_HOR_VIRSTRIDE(hor_virstride / 16) |
+	      RKVDEC_UV_HOR_VIRSTRIDE(hor_virstride / 16) |
+	      RKVDEC_SLICE_NUM_HIGHBIT |
+	      RKVDEC_SLICE_NUM_LOWBITS(0x7ff);
+	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_PICPAR);
+
+	/* config rlc base address */
+	rlc_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
+	writel_relaxed(rlc_addr, rkvdec->regs + RKVDEC_REG_STRM_RLC_BASE);
+	writel_relaxed(rlc_addr, rkvdec->regs + RKVDEC_REG_RLCWRITE_BASE);
+
+	rlc_len = vb2_get_plane_payload(&src_buf->vb2_buf, 0);
+	reg = RKVDEC_STRM_LEN(rlc_len);
+	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_STRM_LEN);
+
+	/* config cabac table */
+	offset = offsetof(struct rkvdec_h264_priv_tbl, cabac_table);
+	writel_relaxed(priv_start_addr + offset,
+		       rkvdec->regs + RKVDEC_REG_CABACTBL_PROB_BASE);
+
+	/* config output base address */
+	dst_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
+	writel_relaxed(dst_addr, rkvdec->regs + RKVDEC_REG_DECOUT_BASE);
+
+	reg = RKVDEC_Y_VIRSTRIDE(y_virstride / 16);
+	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_Y_VIRSTRIDE);
+
+	reg = RKVDEC_YUV_VIRSTRIDE(yuv_virstride / 16);
+	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_YUV_VIRSTRIDE);
+
+	/* config ref pic address & poc */
+	for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
+		struct vb2_buffer *vb_buf = get_ref_buf(ctx, run, i);
+
+		refer_addr = vb2_dma_contig_plane_dma_addr(vb_buf, 0) |
+			     RKVDEC_COLMV_USED_FLAG_REF;
+
+		if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD))
+			refer_addr |= RKVDEC_TOPFIELD_USED_REF |
+				      RKVDEC_BOTFIELD_USED_REF;
+		else if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD)
+			refer_addr |= RKVDEC_BOTFIELD_USED_REF;
+		else
+			refer_addr |= RKVDEC_TOPFIELD_USED_REF;
+
+		writel_relaxed(dpb[i].top_field_order_cnt,
+			       rkvdec->regs +  poc_reg_tbl_top_field[i]);
+		writel_relaxed(dpb[i].bottom_field_order_cnt,
+			       rkvdec->regs + poc_reg_tbl_bottom_field[i]);
+
+		if (i < V4L2_H264_NUM_DPB_ENTRIES - 1)
+			writel_relaxed(refer_addr,
+				       rkvdec->regs + RKVDEC_REG_H264_BASE_REFER(i));
+		else
+			writel_relaxed(refer_addr,
+				       rkvdec->regs + RKVDEC_REG_H264_BASE_REFER15);
+	}
+
+	/*
+	 * Since support frame mode only
+	 * top_field_order_cnt is the same as bottom_field_order_cnt
+	 */
+	reg = RKVDEC_CUR_POC(dec_params->top_field_order_cnt);
+	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_CUR_POC0);
+
+	reg = RKVDEC_CUR_POC(dec_params->bottom_field_order_cnt);
+	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_CUR_POC1);
+
+	/* config hw pps address */
+	offset = offsetof(struct rkvdec_h264_priv_tbl, param_set);
+	writel_relaxed(priv_start_addr + offset,
+		       rkvdec->regs + RKVDEC_REG_PPS_BASE);
+
+	/* config hw rps address */
+	offset = offsetof(struct rkvdec_h264_priv_tbl, rps);
+	writel_relaxed(priv_start_addr + offset,
+		       rkvdec->regs + RKVDEC_REG_RPS_BASE);
+
+	reg = RKVDEC_AXI_DDR_RDATA(0);
+	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_AXI_DDR_RDATA);
+
+	reg = RKVDEC_AXI_DDR_WDATA(0);
+	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_AXI_DDR_WDATA);
+
+	offset = offsetof(struct rkvdec_h264_priv_tbl, err_info);
+	writel_relaxed(priv_start_addr + offset,
+		       rkvdec->regs + RKVDEC_REG_H264_ERRINFO_BASE);
+}
+
+#define RKVDEC_H264_MAX_DEPTH_IN_BYTES		2
+
+static int rkvdec_h264_adjust_fmt(struct rkvdec_ctx *ctx,
+				  struct v4l2_format *f)
+{
+	struct v4l2_pix_format_mplane *fmt = &f->fmt.pix_mp;
+
+	fmt->num_planes = 1;
+	fmt->plane_fmt[0].sizeimage = fmt->width * fmt->height *
+				      RKVDEC_H264_MAX_DEPTH_IN_BYTES;
+	return 0;
+}
+
+static int rkvdec_h264_start(struct rkvdec_ctx *ctx)
+{
+	struct rkvdec_dev *rkvdec = ctx->dev;
+	struct rkvdec_h264_priv_tbl *priv_tbl;
+	struct rkvdec_h264_ctx *h264_ctx;
+	int ret;
+
+	h264_ctx = kzalloc(sizeof(*h264_ctx), GFP_KERNEL);
+	if (!h264_ctx)
+		return -ENOMEM;
+
+	priv_tbl = dma_alloc_coherent(rkvdec->dev, sizeof(*priv_tbl),
+				      &h264_ctx->priv_tbl.dma, GFP_KERNEL);
+	if (!priv_tbl) {
+		ret = -ENOMEM;
+		goto err_free_ctx;
+	}
+
+	h264_ctx->priv_tbl.size = sizeof(*priv_tbl);
+	h264_ctx->priv_tbl.cpu = priv_tbl;
+	memcpy(priv_tbl->cabac_table, rkvdec_h264_cabac_table,
+	       sizeof(rkvdec_h264_cabac_table));
+
+	ctx->priv = h264_ctx;
+	return 0;
+
+err_free_ctx:
+	kfree(h264_ctx);
+	return ret;
+}
+
+static void rkvdec_h264_stop(struct rkvdec_ctx *ctx)
+{
+	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
+	struct rkvdec_dev *rkvdec = ctx->dev;
+
+	dma_free_coherent(rkvdec->dev, h264_ctx->priv_tbl.size,
+			  h264_ctx->priv_tbl.cpu, h264_ctx->priv_tbl.dma);
+	kfree(h264_ctx);
+}
+
+static void rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
+				     struct rkvdec_h264_run *run)
+{
+	struct v4l2_ctrl *ctrl;
+
+	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
+			      V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS);
+	run->decode_params = ctrl ? ctrl->p_cur.p : NULL;
+	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
+			      V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS);
+	run->slices_params = ctrl ? ctrl->p_cur.p : NULL;
+	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
+			      V4L2_CID_MPEG_VIDEO_H264_SPS);
+	run->sps = ctrl ? ctrl->p_cur.p : NULL;
+	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
+			      V4L2_CID_MPEG_VIDEO_H264_PPS);
+	run->pps = ctrl ? ctrl->p_cur.p : NULL;
+	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
+			      V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX);
+	run->scaling_matrix = ctrl ? ctrl->p_cur.p : NULL;
+
+	rkvdec_run_preamble(ctx, &run->base);
+}
+
+static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
+{
+	struct v4l2_h264_reflist_builder reflist_builder;
+	struct rkvdec_dev *rkvdec = ctx->dev;
+	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
+	struct rkvdec_h264_run run;
+
+	rkvdec_h264_run_preamble(ctx, &run);
+
+	/* Build the P/B{0,1} ref lists. */
+	v4l2_h264_init_reflist_builder(&reflist_builder, run.decode_params,
+				       &run.slices_params[0], run.sps,
+				       run.decode_params->dpb);
+	h264_ctx->reflists.num_valid = reflist_builder.num_valid;
+	v4l2_h264_build_p_ref_list(&reflist_builder, h264_ctx->reflists.p);
+	v4l2_h264_build_b_ref_lists(&reflist_builder, h264_ctx->reflists.b0,
+				    h264_ctx->reflists.b1);
+
+	reorder_scaling_list(ctx, &run);
+	assemble_hw_pps(ctx, &run);
+	assemble_hw_rps(ctx, &run);
+	config_registers(ctx, &run);
+
+	rkvdec_run_postamble(ctx, &run.base);
+
+	schedule_delayed_work(&rkvdec->watchdog_work, msecs_to_jiffies(2000));
+
+	writel(0xffffffff, rkvdec->regs + RKVDEC_REG_STRMD_ERR_EN);
+	writel(0xffffffff, rkvdec->regs + RKVDEC_REG_H264_ERR_E);
+	writel(1, rkvdec->regs + RKVDEC_REG_PREF_LUMA_CACHE_COMMAND);
+	writel(1, rkvdec->regs + RKVDEC_REG_PREF_CHR_CACHE_COMMAND);
+
+	/* Start decoding! */
+	writel(RKVDEC_INTERRUPT_DEC_E | RKVDEC_CONFIG_DEC_CLK_GATE_E |
+	       RKVDEC_TIMEOUT_E | RKVDEC_BUF_EMPTY_E,
+	       rkvdec->regs + RKVDEC_REG_INTERRUPT);
+
+	return 0;
+}
+
+const struct rkvdec_coded_fmt_ops rkvdec_h264_fmt_ops = {
+	.adjust_fmt = rkvdec_h264_adjust_fmt,
+	.start = rkvdec_h264_start,
+	.stop = rkvdec_h264_stop,
+	.run = rkvdec_h264_run,
+};
diff --git a/drivers/staging/media/rkvdec/rkvdec-regs.h b/drivers/staging/media/rkvdec/rkvdec-regs.h
new file mode 100644
index 000000000000..15b9bee92016
--- /dev/null
+++ b/drivers/staging/media/rkvdec/rkvdec-regs.h
@@ -0,0 +1,223 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef RKVDEC_REGS_H_
+#define RKVDEC_REGS_H_
+
+/* rkvcodec registers */
+#define RKVDEC_REG_INTERRUPT				0x004
+#define RKVDEC_INTERRUPT_DEC_E				BIT(0)
+#define RKVDEC_CONFIG_DEC_CLK_GATE_E			BIT(1)
+#define RKVDEC_E_STRMD_CLKGATE_DIS			BIT(2)
+#define RKVDEC_TIMEOUT_MODE				BIT(3)
+#define RKVDEC_IRQ_DIS					BIT(4)
+#define RKVDEC_TIMEOUT_E				BIT(5)
+#define RKVDEC_BUF_EMPTY_E				BIT(6)
+#define RKVDEC_STRM_E_WAITDECFIFO_EMPTY			BIT(7)
+#define RKVDEC_IRQ					BIT(8)
+#define RKVDEC_IRQ_RAW					BIT(9)
+#define RKVDEC_E_REWRITE_VALID				BIT(10)
+#define RKVDEC_COMMONIRQ_MODE				BIT(11)
+#define RKVDEC_RDY_STA					BIT(12)
+#define RKVDEC_BUS_STA					BIT(13)
+#define RKVDEC_ERR_STA					BIT(14)
+#define RKVDEC_TIMEOUT_STA				BIT(15)
+#define RKVDEC_BUF_EMPTY_STA				BIT(16)
+#define RKVDEC_COLMV_REF_ERR_STA			BIT(17)
+#define RKVDEC_CABU_END_STA				BIT(18)
+#define RKVDEC_H264ORVP9_ERR_MODE			BIT(19)
+#define RKVDEC_SOFTRST_EN_P				BIT(20)
+#define RKVDEC_FORCE_SOFTRESET_VALID			BIT(21)
+#define RKVDEC_SOFTRESET_RDY				BIT(22)
+
+#define RKVDEC_REG_SYSCTRL				0x008
+#define RKVDEC_IN_ENDIAN				BIT(0)
+#define RKVDEC_IN_SWAP32_E				BIT(1)
+#define RKVDEC_IN_SWAP64_E				BIT(2)
+#define RKVDEC_STR_ENDIAN				BIT(3)
+#define RKVDEC_STR_SWAP32_E				BIT(4)
+#define RKVDEC_STR_SWAP64_E				BIT(5)
+#define RKVDEC_OUT_ENDIAN				BIT(6)
+#define RKVDEC_OUT_SWAP32_E				BIT(7)
+#define RKVDEC_OUT_CBCR_SWAP				BIT(8)
+#define RKVDEC_RLC_MODE_DIRECT_WRITE			BIT(10)
+#define RKVDEC_RLC_MODE					BIT(11)
+#define RKVDEC_STRM_START_BIT(x)			(((x) & 0x7f) << 12)
+#define RKVDEC_MODE(x)					(((x) & 0x03) << 20)
+#define RKVDEC_MODE_H264				1
+#define RKVDEC_MODE_VP9					2
+#define RKVDEC_RPS_MODE					BIT(24)
+#define RKVDEC_STRM_MODE				BIT(25)
+#define RKVDEC_H264_STRM_LASTPKT			BIT(26)
+#define RKVDEC_H264_FIRSTSLICE_FLAG			BIT(27)
+#define RKVDEC_H264_FRAME_ORSLICE			BIT(28)
+#define RKVDEC_BUSPR_SLOT_DIS				BIT(29)
+
+#define RKVDEC_REG_PICPAR				0x00C
+#define RKVDEC_Y_HOR_VIRSTRIDE(x)			((x) & 0x1ff)
+#define RKVDEC_SLICE_NUM_HIGHBIT			BIT(11)
+#define RKVDEC_UV_HOR_VIRSTRIDE(x)			(((x) & 0x1ff) << 12)
+#define RKVDEC_SLICE_NUM_LOWBITS(x)			(((x) & 0x7ff) << 21)
+
+#define RKVDEC_REG_STRM_RLC_BASE			0x010
+
+#define RKVDEC_REG_STRM_LEN				0x014
+#define RKVDEC_STRM_LEN(x)				((x) & 0x7ffffff)
+
+#define RKVDEC_REG_CABACTBL_PROB_BASE			0x018
+#define RKVDEC_REG_DECOUT_BASE				0x01C
+
+#define RKVDEC_REG_Y_VIRSTRIDE				0x020
+#define RKVDEC_Y_VIRSTRIDE(x)				((x) & 0xfffff)
+
+#define RKVDEC_REG_YUV_VIRSTRIDE			0x024
+#define RKVDEC_YUV_VIRSTRIDE(x)				((x) & 0x1fffff)
+#define RKVDEC_REG_H264_BASE_REFER(i)			(((i) * 0x04) + 0x028)
+
+#define RKVDEC_REG_H264_BASE_REFER15			0x0C0
+#define RKVDEC_FIELD_REF				BIT(0)
+#define RKVDEC_TOPFIELD_USED_REF			BIT(1)
+#define RKVDEC_BOTFIELD_USED_REF			BIT(2)
+#define RKVDEC_COLMV_USED_FLAG_REF			BIT(3)
+
+#define RKVDEC_REG_VP9_LAST_FRAME_BASE			0x02c
+#define RKVDEC_REG_VP9_GOLDEN_FRAME_BASE		0x030
+#define RKVDEC_REG_VP9_ALTREF_FRAME_BASE		0x034
+
+#define RKVDEC_REG_VP9_CPRHEADER_OFFSET			0x028
+#define RKVDEC_VP9_CPRHEADER_OFFSET(x)			((x) & 0xffff)
+
+#define RKVDEC_REG_VP9_REFERLAST_BASE			0x02C
+#define RKVDEC_REG_VP9_REFERGOLDEN_BASE			0x030
+#define RKVDEC_REG_VP9_REFERALFTER_BASE			0x034
+
+#define RKVDEC_REG_VP9COUNT_BASE			0x038
+#define RKVDEC_VP9COUNT_UPDATE_EN			BIT(0)
+
+#define RKVDEC_REG_VP9_SEGIDLAST_BASE			0x03C
+#define RKVDEC_REG_VP9_SEGIDCUR_BASE			0x040
+#define RKVDEC_REG_VP9_FRAME_SIZE(i)			((i) * 0x04 + 0x044)
+#define RKVDEC_VP9_FRAMEWIDTH(x)			(((x) & 0xffff) << 0)
+#define RKVDEC_VP9_FRAMEHEIGHT(x)			(((x) & 0xffff) << 16)
+
+#define RKVDEC_VP9_SEGID_GRP(i)				((i) * 0x04 + 0x050)
+#define RKVDEC_SEGID_ABS_DELTA(x)			((x) & 0x1)
+#define RKVDEC_SEGID_FRAME_QP_DELTA_EN(x)		(((x) & 0x1) << 1)
+#define RKVDEC_SEGID_FRAME_QP_DELTA(x)			(((x) & 0x1ff) << 2)
+#define RKVDEC_SEGID_FRAME_LOOPFILTER_VALUE_EN(x)	(((x) & 0x1) << 11)
+#define RKVDEC_SEGID_FRAME_LOOPFILTER_VALUE(x)		(((x) & 0x7f) << 12)
+#define RKVDEC_SEGID_REFERINFO_EN(x)			(((x) & 0x1) << 19)
+#define RKVDEC_SEGID_REFERINFO(x)			(((x) & 0x03) << 20)
+#define RKVDEC_SEGID_FRAME_SKIP_EN(x)			(((x) & 0x1) << 22)
+
+#define RKVDEC_VP9_CPRHEADER_CONFIG			0x070
+#define RKVDEC_VP9_TX_MODE(x)				((x) & 0x07)
+#define RKVDEC_VP9_FRAME_REF_MODE(x)			(((x) & 0x03) << 3)
+
+#define RKVDEC_VP9_REF_SCALE(i)				((i) * 0x04 + 0x074)
+#define RKVDEC_VP9_REF_HOR_SCALE(x)			((x) & 0xffff)
+#define RKVDEC_VP9_REF_VER_SCALE(x)			(((x) & 0xffff) << 16)
+
+#define RKVDEC_VP9_REF_DELTAS_LASTFRAME			0x080
+#define RKVDEC_REF_DELTAS_LASTFRAME(pos, val)		(((val) & 0x7f) << ((pos) * 7))
+
+#define RKVDEC_VP9_INFO_LASTFRAME			0x084
+#define RKVDEC_MODE_DELTAS_LASTFRAME(pos, val)		(((val) & 0x7f) << ((pos) * 7))
+#define RKVDEC_SEG_EN_LASTFRAME				BIT(16)
+#define RKVDEC_LAST_SHOW_FRAME				BIT(17)
+#define RKVDEC_LAST_INTRA_ONLY				BIT(18)
+#define RKVDEC_LAST_WIDHHEIGHT_EQCUR			BIT(19)
+#define RKVDEC_COLOR_SPACE_LASTKEYFRAME(x)		(((x) & 0x07) << 20)
+
+#define RKVDEC_VP9_INTERCMD_BASE			0x088
+
+#define RKVDEC_VP9_INTERCMD_NUM				0x08C
+#define RKVDEC_INTERCMD_NUM(x)				((x) & 0xffffff)
+
+#define RKVDEC_VP9_LASTTILE_SIZE			0x090
+#define RKVDEC_LASTTILE_SIZE(x)				((x) & 0xffffff)
+
+#define RKVDEC_VP9_HOR_VIRSTRIDE(i)			((i) * 0x04 + 0x094)
+#define RKVDEC_HOR_Y_VIRSTRIDE(x)			((x) & 0x1ff)
+#define RKVDEC_HOR_UV_VIRSTRIDE(x)			(((x) & 0x1ff) << 16)
+
+#define RKVDEC_REG_H264_POC_REFER0(i)			(((i) * 0x04) + 0x064)
+#define RKVDEC_REG_H264_POC_REFER1(i)			(((i) * 0x04) + 0x0C4)
+#define RKVDEC_REG_H264_POC_REFER2(i)			(((i) * 0x04) + 0x120)
+#define RKVDEC_POC_REFER(x)				((x) & 0xffffffff)
+
+#define RKVDEC_REG_CUR_POC0				0x0A0
+#define RKVDEC_REG_CUR_POC1				0x128
+#define RKVDEC_CUR_POC(x)				((x) & 0xffffffff)
+
+#define RKVDEC_REG_RLCWRITE_BASE			0x0A4
+#define RKVDEC_REG_PPS_BASE				0x0A8
+#define RKVDEC_REG_RPS_BASE				0x0AC
+
+#define RKVDEC_REG_STRMD_ERR_EN				0x0B0
+#define RKVDEC_STRMD_ERR_EN(x)				((x) & 0xffffffff)
+
+#define RKVDEC_REG_STRMD_ERR_STA			0x0B4
+#define RKVDEC_STRMD_ERR_STA(x)				((x) & 0xfffffff)
+#define RKVDEC_COLMV_ERR_REF_PICIDX(x)			(((x) & 0x0f) << 28)
+
+#define RKVDEC_REG_STRMD_ERR_CTU			0x0B8
+#define RKVDEC_STRMD_ERR_CTU(x)				((x) & 0xff)
+#define RKVDEC_STRMD_ERR_CTU_YOFFSET(x)			(((x) & 0xff) << 8)
+#define RKVDEC_STRMFIFO_SPACE2FULL(x)			(((x) & 0x7f) << 16)
+#define RKVDEC_VP9_ERR_EN_CTU0				BIT(24)
+
+#define RKVDEC_REG_SAO_CTU_POS				0x0BC
+#define RKVDEC_SAOWR_XOFFSET(x)				((x) & 0x1ff)
+#define RKVDEC_SAOWR_YOFFSET(x)				(((x) & 0x3ff) << 16)
+
+#define RKVDEC_VP9_LAST_FRAME_YSTRIDE			0x0C0
+#define RKVDEC_VP9_GOLDEN_FRAME_YSTRIDE			0x0C4
+#define RKVDEC_VP9_ALTREF_FRAME_YSTRIDE			0x0C8
+#define RKVDEC_VP9_REF_YSTRIDE(x)			(((x) & 0xfffff) << 0)
+
+#define RKVDEC_VP9_LAST_FRAME_YUVSTRIDE			0x0CC
+#define RKVDEC_VP9_REF_YUVSTRIDE(x)			(((x) & 0x1fffff) << 0)
+
+#define RKVDEC_VP9_REF_COLMV_BASE			0x0D0
+
+#define RKVDEC_REG_PERFORMANCE_CYCLE			0x100
+#define RKVDEC_PERFORMANCE_CYCLE(x)			((x) & 0xffffffff)
+
+#define RKVDEC_REG_AXI_DDR_RDATA			0x104
+#define RKVDEC_AXI_DDR_RDATA(x)				((x) & 0xffffffff)
+
+#define RKVDEC_REG_AXI_DDR_WDATA			0x108
+#define RKVDEC_AXI_DDR_WDATA(x)				((x) & 0xffffffff)
+
+#define RKVDEC_REG_FPGADEBUG_RESET			0x10C
+#define RKVDEC_BUSIFD_RESETN				BIT(0)
+#define RKVDEC_CABAC_RESETN				BIT(1)
+#define RKVDEC_DEC_CTRL_RESETN				BIT(2)
+#define RKVDEC_TRANSD_RESETN				BIT(3)
+#define RKVDEC_INTRA_RESETN				BIT(4)
+#define RKVDEC_INTER_RESETN				BIT(5)
+#define RKVDEC_RECON_RESETN				BIT(6)
+#define RKVDEC_FILER_RESETN				BIT(7)
+
+#define RKVDEC_REG_PERFORMANCE_SEL			0x110
+#define RKVDEC_PERF_SEL_CNT0(x)				((x) & 0x3f)
+#define RKVDEC_PERF_SEL_CNT1(x)				(((x) & 0x3f) << 8)
+#define RKVDEC_PERF_SEL_CNT2(x)				(((x) & 0x3f) << 16)
+
+#define RKVDEC_REG_PERFORMANCE_CNT(i)			((i) * 0x04 + 0x114)
+#define RKVDEC_PERF_CNT(x)				((x) & 0xffffffff)
+
+#define RKVDEC_REG_H264_ERRINFO_BASE			0x12C
+
+#define RKVDEC_REG_H264_ERRINFO_NUM			0x130
+#define RKVDEC_SLICEDEC_NUM(x)				((x) & 0x3fff)
+#define RKVDEC_STRMD_DECT_ERR_FLAG			BIT(15)
+#define RKVDEC_ERR_PKT_NUM(x)				(((x) & 0x3fff) << 16)
+
+#define RKVDEC_REG_H264_ERR_E				0x134
+#define RKVDEC_H264_ERR_EN_HIGHBITS(x)			((x) & 0x3fffffff)
+
+#define RKVDEC_REG_PREF_LUMA_CACHE_COMMAND		0x410
+#define RKVDEC_REG_PREF_CHR_CACHE_COMMAND		0x450
+
+#endif /* RKVDEC_REGS_H_ */
diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
new file mode 100644
index 000000000000..225eeca73356
--- /dev/null
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -0,0 +1,1103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip Video Decoder driver
+ *
+ * Copyright (C) 2019 Collabora, Ltd.
+ *
+ * Based on rkvdec driver by Google LLC. (Tomasz Figa <tfiga@chromium.org>)
+ * Based on s5p-mfc driver by Samsung Electronics Co., Ltd.
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-vmalloc.h>
+
+#include "rkvdec.h"
+#include "rkvdec-regs.h"
+
+static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
+	{
+		.per_request = true,
+		.mandatory = true,
+		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS,
+	},
+	{
+		.per_request = true,
+		.mandatory = true,
+		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS,
+	},
+	{
+		.per_request = true,
+		.mandatory = true,
+		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_SPS,
+	},
+	{
+		.per_request = true,
+		.mandatory = true,
+		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_PPS,
+	},
+	{
+		.per_request = true,
+		.mandatory = true,
+		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX,
+	},
+	{
+		.mandatory = true,
+		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE,
+		.cfg.min = V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED,
+		.cfg.max = V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED,
+		.cfg.def = V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED,
+	},
+	{
+		.mandatory = true,
+		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_START_CODE,
+		.cfg.min = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B,
+		.cfg.def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B,
+		.cfg.max = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B,
+	},
+};
+
+static const struct rkvdec_ctrls rkvdec_h264_ctrls = {
+	.ctrls = rkvdec_h264_ctrl_descs,
+	.num_ctrls = ARRAY_SIZE(rkvdec_h264_ctrl_descs),
+};
+
+static const u32 rkvdec_h264_decoded_fmts[] = {
+	V4L2_PIX_FMT_NV12,
+};
+
+static const struct rkvdec_coded_fmt_desc rkvdec_coded_fmts[] = {
+	{
+		.fourcc = V4L2_PIX_FMT_H264_SLICE,
+		.frmsize = {
+			.min_width = 48,
+			.max_width = 4096,
+			.step_width = 16,
+			.min_height = 48,
+			.max_height = 2304,
+			.step_height = 16,
+		},
+		.ctrls = &rkvdec_h264_ctrls,
+		.ops = &rkvdec_h264_fmt_ops,
+		.num_decoded_fmts = ARRAY_SIZE(rkvdec_h264_decoded_fmts),
+		.decoded_fmts = rkvdec_h264_decoded_fmts,
+	}
+};
+
+static const struct rkvdec_coded_fmt_desc *
+rkvdec_find_coded_fmt_desc(u32 fourcc)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(rkvdec_coded_fmts); i++) {
+		if (rkvdec_coded_fmts[i].fourcc == fourcc)
+			return &rkvdec_coded_fmts[i];
+	}
+
+	return NULL;
+}
+
+static void rkvdec_reset_fmt(struct rkvdec_ctx *ctx, struct v4l2_format *f,
+			     u32 fourcc)
+{
+	memset(f, 0, sizeof(*f));
+	f->fmt.pix_mp.pixelformat = fourcc;
+	f->fmt.pix_mp.field = V4L2_FIELD_NONE;
+	f->fmt.pix_mp.colorspace = V4L2_COLORSPACE_REC709,
+	f->fmt.pix_mp.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+	f->fmt.pix_mp.quantization = V4L2_QUANTIZATION_DEFAULT;
+	f->fmt.pix_mp.xfer_func = V4L2_XFER_FUNC_DEFAULT;
+}
+
+static void rkvdec_reset_coded_fmt(struct rkvdec_ctx *ctx)
+{
+	struct v4l2_format *f = &ctx->coded_fmt;
+
+	ctx->coded_fmt_desc = &rkvdec_coded_fmts[0];
+	rkvdec_reset_fmt(ctx, f, ctx->coded_fmt_desc->fourcc);
+
+	f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+	f->fmt.pix_mp.width = ctx->coded_fmt_desc->frmsize.min_width;
+	f->fmt.pix_mp.height = ctx->coded_fmt_desc->frmsize.min_height;
+
+	if (ctx->coded_fmt_desc->ops->adjust_fmt)
+		ctx->coded_fmt_desc->ops->adjust_fmt(ctx, f);
+}
+
+static void rkvdec_reset_decoded_fmt(struct rkvdec_ctx *ctx)
+{
+	struct v4l2_format *f = &ctx->decoded_fmt;
+
+	rkvdec_reset_fmt(ctx, f, ctx->coded_fmt_desc->decoded_fmts[0]);
+	f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+	v4l2_fill_pixfmt_mp(&f->fmt.pix_mp,
+			    ctx->coded_fmt_desc->decoded_fmts[0],
+			    ctx->coded_fmt.fmt.pix_mp.width,
+			    ctx->coded_fmt.fmt.pix_mp.height);
+	f->fmt.pix_mp.plane_fmt[0].sizeimage += 128 *
+		DIV_ROUND_UP(f->fmt.pix_mp.width, 16) *
+		DIV_ROUND_UP(f->fmt.pix_mp.height, 16);
+}
+
+static int rkvdec_enum_framesizes(struct file *file, void *priv,
+				  struct v4l2_frmsizeenum *fsize)
+{
+	const struct rkvdec_coded_fmt_desc *fmt;
+
+	if (fsize->index != 0)
+		return -EINVAL;
+
+	fmt = rkvdec_find_coded_fmt_desc(fsize->pixel_format);
+	if (!fmt)
+		return -EINVAL;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
+	fsize->stepwise = fmt->frmsize;
+	return 0;
+}
+
+static int rkvdec_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	struct rkvdec_dev *rkvdec = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+
+	strscpy(cap->driver, rkvdec->dev->driver->name,
+		sizeof(cap->driver));
+	strscpy(cap->card, vdev->name, sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+		 rkvdec->dev->driver->name);
+	return 0;
+}
+
+static int rkvdec_try_capture_fmt(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+	struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
+	const struct rkvdec_coded_fmt_desc *coded_desc;
+	unsigned int i;
+
+	/*
+	 * The codec context should point to a coded format desc, if the format
+	 * on the coded end has not been set yet, it should point to the
+	 * default value.
+	 */
+	coded_desc = ctx->coded_fmt_desc;
+	if (WARN_ON(!coded_desc))
+		return -EINVAL;
+
+	for (i = 0; i < coded_desc->num_decoded_fmts; i++) {
+		if (coded_desc->decoded_fmts[i] == pix_mp->pixelformat)
+			break;
+	}
+
+	if (i == coded_desc->num_decoded_fmts)
+		pix_mp->pixelformat = coded_desc->decoded_fmts[0];
+
+	/* Always apply the frmsize constraint of the coded end. */
+	v4l2_apply_frmsize_constraints(&pix_mp->width,
+				       &pix_mp->height,
+				       &coded_desc->frmsize);
+
+	v4l2_fill_pixfmt_mp(pix_mp, pix_mp->pixelformat,
+			    pix_mp->width, pix_mp->height);
+	pix_mp->plane_fmt[0].sizeimage +=
+		128 *
+		DIV_ROUND_UP(pix_mp->width, 16) *
+		DIV_ROUND_UP(pix_mp->height, 16);
+	pix_mp->field = V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int rkvdec_try_output_fmt(struct file *file, void *priv,
+				 struct v4l2_format *f)
+{
+	struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+	struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
+	const struct rkvdec_coded_fmt_desc *desc;
+
+	desc = rkvdec_find_coded_fmt_desc(pix_mp->pixelformat);
+	if (!desc) {
+		pix_mp->pixelformat = rkvdec_coded_fmts[0].fourcc;
+		desc = &rkvdec_coded_fmts[0];
+	}
+
+	v4l2_apply_frmsize_constraints(&pix_mp->width,
+				       &pix_mp->height,
+				       &desc->frmsize);
+
+	pix_mp->field = V4L2_FIELD_NONE;
+	/* All coded formats are considered single planar for now. */
+	pix_mp->num_planes = 1;
+
+	if (desc->ops->adjust_fmt) {
+		int ret;
+
+		ret = desc->ops->adjust_fmt(ctx, f);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rkvdec_s_fmt(struct file *file, void *priv,
+			struct v4l2_format *f,
+			int (*try_fmt)(struct file *, void *,
+				       struct v4l2_format *))
+{
+	struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
+	struct vb2_queue *vq;
+
+	if (!try_fmt)
+		return -EINVAL;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (vb2_is_busy(vq))
+		return -EBUSY;
+
+	return try_fmt(file, priv, f);
+}
+
+static int rkvdec_s_capture_fmt(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
+	int ret;
+
+	ret = rkvdec_s_fmt(file, priv, f, rkvdec_try_capture_fmt);
+	if (ret)
+		return ret;
+
+	ctx->decoded_fmt = *f;
+	return 0;
+}
+
+static int rkvdec_s_output_fmt(struct file *file, void *priv,
+			       struct v4l2_format *f)
+{
+	struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
+	struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
+	const struct rkvdec_coded_fmt_desc *desc;
+	struct v4l2_format *cap_fmt;
+	struct vb2_queue *peer_vq;
+	int ret;
+
+	/*
+	 * Since format change on the OUTPUT queue will reset the CAPTURE
+	 * queue, we can't allow doing so when the CAPTURE queue has buffers
+	 * allocated.
+	 */
+	peer_vq = v4l2_m2m_get_vq(m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
+	if (vb2_is_busy(peer_vq))
+		return -EBUSY;
+
+	ret = rkvdec_s_fmt(file, priv, f, rkvdec_try_output_fmt);
+	if (ret)
+		return ret;
+
+	desc = rkvdec_find_coded_fmt_desc(f->fmt.pix_mp.pixelformat);
+	if (!desc)
+		return -EINVAL;
+	ctx->coded_fmt_desc = desc;
+	ctx->coded_fmt = *f;
+
+	/*
+	 * Current decoded format might have become invalid with newly
+	 * selected codec, so reset it to default just to be safe and
+	 * keep internal driver state sane. User is mandated to set
+	 * the decoded format again after we return, so we don't need
+	 * anything smarter.
+	 *
+	 * Note that this will propagates any size changes to the decoded format.
+	 */
+	rkvdec_reset_decoded_fmt(ctx);
+
+	/* Propagate colorspace information to capture. */
+	cap_fmt = &ctx->decoded_fmt;
+	cap_fmt->fmt.pix_mp.colorspace = f->fmt.pix_mp.colorspace;
+	cap_fmt->fmt.pix_mp.xfer_func = f->fmt.pix_mp.xfer_func;
+	cap_fmt->fmt.pix_mp.ycbcr_enc = f->fmt.pix_mp.ycbcr_enc;
+	cap_fmt->fmt.pix_mp.quantization = f->fmt.pix_mp.quantization;
+
+	return 0;
+}
+
+static int rkvdec_g_output_fmt(struct file *file, void *priv,
+			       struct v4l2_format *f)
+{
+	struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
+
+	*f = ctx->coded_fmt;
+	return 0;
+}
+
+static int rkvdec_g_capture_fmt(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
+
+	*f = ctx->decoded_fmt;
+	return 0;
+}
+
+static int rkvdec_enum_output_fmt(struct file *file, void *priv,
+				  struct v4l2_fmtdesc *f)
+{
+	if (f->index >= ARRAY_SIZE(rkvdec_coded_fmts))
+		return -EINVAL;
+
+	f->pixelformat = rkvdec_coded_fmts[f->index].fourcc;
+	return 0;
+}
+
+static int rkvdec_enum_capture_fmt(struct file *file, void *priv,
+				   struct v4l2_fmtdesc *f)
+{
+	struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
+
+	if (WARN_ON(!ctx->coded_fmt_desc))
+		return -EINVAL;
+
+	if (f->index >= ctx->coded_fmt_desc->num_decoded_fmts)
+		return -EINVAL;
+
+	f->pixelformat = ctx->coded_fmt_desc->decoded_fmts[f->index];
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops rkvdec_ioctl_ops = {
+	.vidioc_querycap = rkvdec_querycap,
+	.vidioc_enum_framesizes = rkvdec_enum_framesizes,
+
+	.vidioc_try_fmt_vid_cap_mplane = rkvdec_try_capture_fmt,
+	.vidioc_try_fmt_vid_out_mplane = rkvdec_try_output_fmt,
+	.vidioc_s_fmt_vid_out_mplane = rkvdec_s_output_fmt,
+	.vidioc_s_fmt_vid_cap_mplane = rkvdec_s_capture_fmt,
+	.vidioc_g_fmt_vid_out_mplane = rkvdec_g_output_fmt,
+	.vidioc_g_fmt_vid_cap_mplane = rkvdec_g_capture_fmt,
+	.vidioc_enum_fmt_vid_out = rkvdec_enum_output_fmt,
+	.vidioc_enum_fmt_vid_cap = rkvdec_enum_capture_fmt,
+
+	.vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs,
+	.vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
+	.vidioc_qbuf = v4l2_m2m_ioctl_qbuf,
+	.vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
+	.vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf,
+	.vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
+	.vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
+
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+
+	.vidioc_streamon = v4l2_m2m_ioctl_streamon,
+	.vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
+};
+
+static int rkvdec_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
+			      unsigned int *num_planes, unsigned int sizes[],
+			      struct device *alloc_devs[])
+{
+	struct rkvdec_ctx *ctx = vb2_get_drv_priv(vq);
+	struct v4l2_format *f;
+	unsigned int i;
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type))
+		f = &ctx->coded_fmt;
+	else
+		f = &ctx->decoded_fmt;
+
+	if (*num_planes) {
+		if (*num_planes != f->fmt.pix_mp.num_planes)
+			return -EINVAL;
+
+		for (i = 0; i < f->fmt.pix_mp.num_planes; i++) {
+			if (sizes[i] < f->fmt.pix_mp.plane_fmt[i].sizeimage)
+				return -EINVAL;
+		}
+	} else {
+		*num_planes = f->fmt.pix_mp.num_planes;
+		for (i = 0; i < f->fmt.pix_mp.num_planes; i++)
+			sizes[i] = f->fmt.pix_mp.plane_fmt[i].sizeimage;
+	}
+
+	return 0;
+}
+
+static int rkvdec_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct rkvdec_ctx *ctx = vb2_get_drv_priv(vq);
+	struct v4l2_format *f;
+	unsigned int i;
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type))
+		f = &ctx->coded_fmt;
+	else
+		f = &ctx->decoded_fmt;
+
+	for (i = 0; i < f->fmt.pix_mp.num_planes; ++i) {
+		u32 sizeimage = f->fmt.pix_mp.plane_fmt[i].sizeimage;
+
+		if (vb2_plane_size(vb, i) < sizeimage)
+			return -EINVAL;
+	}
+	vb2_set_plane_payload(vb, 0, f->fmt.pix_mp.plane_fmt[0].sizeimage);
+	return 0;
+}
+
+static void rkvdec_buf_queue(struct vb2_buffer *vb)
+{
+	struct rkvdec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+
+	v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
+}
+
+static int rkvdec_buf_out_validate(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+
+	vbuf->field = V4L2_FIELD_NONE;
+	return 0;
+}
+
+static void rkvdec_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct rkvdec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->ctrl_hdl);
+}
+
+static int rkvdec_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct rkvdec_ctx *ctx = vb2_get_drv_priv(q);
+	const struct rkvdec_coded_fmt_desc *desc;
+	int ret;
+
+	if (!V4L2_TYPE_IS_OUTPUT(q->type))
+		return 0;
+
+	desc = ctx->coded_fmt_desc;
+	if (WARN_ON(!desc))
+		return -EINVAL;
+
+	if (desc->ops->start) {
+		ret = desc->ops->start(ctx);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void rkvdec_queue_cleanup(struct vb2_queue *vq, u32 state)
+{
+	struct rkvdec_ctx *ctx = vb2_get_drv_priv(vq);
+
+	while (true) {
+		struct vb2_v4l2_buffer *vbuf;
+
+		if (V4L2_TYPE_IS_OUTPUT(vq->type))
+			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+		else
+			vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+
+		if (!vbuf)
+			break;
+
+		v4l2_ctrl_request_complete(vbuf->vb2_buf.req_obj.req,
+					   &ctx->ctrl_hdl);
+		v4l2_m2m_buf_done(vbuf, state);
+	}
+}
+
+static void rkvdec_stop_streaming(struct vb2_queue *q)
+{
+	struct rkvdec_ctx *ctx = vb2_get_drv_priv(q);
+
+	if (V4L2_TYPE_IS_OUTPUT(q->type)) {
+		const struct rkvdec_coded_fmt_desc *desc = ctx->coded_fmt_desc;
+
+		if (WARN_ON(!desc))
+			return;
+
+		if (desc->ops->stop)
+			desc->ops->stop(ctx);
+	}
+
+	rkvdec_queue_cleanup(q, VB2_BUF_STATE_ERROR);
+}
+
+static const struct vb2_ops rkvdec_queue_ops = {
+	.queue_setup = rkvdec_queue_setup,
+	.buf_prepare = rkvdec_buf_prepare,
+	.buf_queue = rkvdec_buf_queue,
+	.buf_out_validate = rkvdec_buf_out_validate,
+	.buf_request_complete = rkvdec_buf_request_complete,
+	.start_streaming = rkvdec_start_streaming,
+	.stop_streaming = rkvdec_stop_streaming,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+};
+
+static int rkvdec_request_validate(struct media_request *req)
+{
+	struct media_request_object *obj;
+	const struct rkvdec_ctrls *ctrls;
+	struct v4l2_ctrl_handler *hdl;
+	struct rkvdec_ctx *ctx = NULL;
+	unsigned int count, i;
+	int ret;
+
+	list_for_each_entry(obj, &req->objects, list) {
+		if (vb2_request_object_is_buffer(obj)) {
+			struct vb2_buffer *vb;
+
+			vb = container_of(obj, struct vb2_buffer, req_obj);
+			ctx = vb2_get_drv_priv(vb->vb2_queue);
+			break;
+		}
+	}
+
+	if (!ctx)
+		return -EINVAL;
+
+	count = vb2_request_buffer_cnt(req);
+	if (!count)
+		return -ENOENT;
+	else if (count > 1)
+		return -EINVAL;
+
+	hdl = v4l2_ctrl_request_hdl_find(req, &ctx->ctrl_hdl);
+	if (!hdl)
+		return -ENOENT;
+
+	ret = 0;
+	ctrls = ctx->coded_fmt_desc->ctrls;
+	for (i = 0; ctrls && i < ctrls->num_ctrls; i++) {
+		u32 id = ctrls->ctrls[i].cfg.id;
+		struct v4l2_ctrl *ctrl;
+
+		if (!ctrls->ctrls[i].per_request || !ctrls->ctrls[i].mandatory)
+			continue;
+
+		ctrl = v4l2_ctrl_request_hdl_ctrl_find(hdl, id);
+		if (!ctrl) {
+			ret = -ENOENT;
+			break;
+		}
+	}
+
+	v4l2_ctrl_request_hdl_put(hdl);
+
+	if (ret)
+		return ret;
+
+	return vb2_request_validate(req);
+}
+
+static const struct media_device_ops rkvdec_media_ops = {
+	.req_validate = rkvdec_request_validate,
+	.req_queue = v4l2_m2m_request_queue,
+};
+
+static void rkvdec_job_finish_no_pm(struct rkvdec_ctx *ctx,
+				    enum vb2_buffer_state result)
+{
+	if (ctx->coded_fmt_desc->ops->done) {
+		struct vb2_v4l2_buffer *src_buf, *dst_buf;
+
+		src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+		dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+		ctx->coded_fmt_desc->ops->done(ctx, src_buf, dst_buf, result);
+	}
+
+	v4l2_m2m_buf_done_and_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx,
+					 result);
+}
+
+static void rkvdec_job_finish(struct rkvdec_ctx *ctx,
+			      enum vb2_buffer_state result)
+{
+	struct rkvdec_dev *rkvdec = ctx->dev;
+
+	pm_runtime_mark_last_busy(rkvdec->dev);
+	pm_runtime_put_autosuspend(rkvdec->dev);
+	rkvdec_job_finish_no_pm(ctx, result);
+}
+
+void rkvdec_run_preamble(struct rkvdec_ctx *ctx, struct rkvdec_run *run)
+{
+	struct media_request *src_req;
+
+	memset(run, 0, sizeof(*run));
+
+	run->bufs.src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+	run->bufs.dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+
+	/* Apply request(s) controls if needed. */
+	src_req = run->bufs.src->vb2_buf.req_obj.req;
+	if (src_req)
+		v4l2_ctrl_request_setup(src_req, &ctx->ctrl_hdl);
+
+	v4l2_m2m_buf_copy_metadata(run->bufs.src, run->bufs.dst, true);
+}
+
+void rkvdec_run_postamble(struct rkvdec_ctx *ctx, struct rkvdec_run *run)
+{
+	struct media_request *src_req = run->bufs.src->vb2_buf.req_obj.req;
+
+	if (src_req)
+		v4l2_ctrl_request_complete(src_req, &ctx->ctrl_hdl);
+}
+
+static void rkvdec_device_run(void *priv)
+{
+	struct rkvdec_ctx *ctx = priv;
+	struct rkvdec_dev *rkvdec = ctx->dev;
+	const struct rkvdec_coded_fmt_desc *desc = ctx->coded_fmt_desc;
+	int ret;
+
+	if (WARN_ON(!desc))
+		return;
+
+	ret = pm_runtime_get_sync(rkvdec->dev);
+	if (ret < 0) {
+		rkvdec_job_finish_no_pm(ctx, VB2_BUF_STATE_ERROR);
+		return;
+	}
+
+	ret = desc->ops->run(ctx);
+	if (ret)
+		rkvdec_job_finish(ctx, VB2_BUF_STATE_ERROR);
+}
+
+static struct v4l2_m2m_ops rkvdec_m2m_ops = {
+	.device_run = rkvdec_device_run,
+};
+
+static int rkvdec_queue_init(void *priv,
+			     struct vb2_queue *src_vq,
+			     struct vb2_queue *dst_vq)
+{
+	struct rkvdec_ctx *ctx = priv;
+	struct rkvdec_dev *rkvdec = ctx->dev;
+	int ret;
+
+	src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+	src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
+	src_vq->drv_priv = ctx;
+	src_vq->ops = &rkvdec_queue_ops;
+	src_vq->mem_ops = &vb2_dma_contig_memops;
+
+	/*
+	 * Driver does mostly sequential access, so sacrifice TLB efficiency
+	 * for faster allocation. Also, no CPU access on the source queue,
+	 * so no kernel mapping needed.
+	 */
+	src_vq->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES |
+			    DMA_ATTR_NO_KERNEL_MAPPING;
+	src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	src_vq->lock = &rkvdec->vdev_lock;
+	src_vq->dev = rkvdec->v4l2_dev.dev;
+	src_vq->supports_requests = true;
+	src_vq->requires_requests = true;
+
+	ret = vb2_queue_init(src_vq);
+	if (ret)
+		return ret;
+
+	dst_vq->bidirectional = true;
+	dst_vq->mem_ops = &vb2_dma_contig_memops;
+	dst_vq->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES |
+			    DMA_ATTR_NO_KERNEL_MAPPING;
+	dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+	dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
+	dst_vq->drv_priv = ctx;
+	dst_vq->ops = &rkvdec_queue_ops;
+	dst_vq->buf_struct_size = sizeof(struct rkvdec_decoded_buffer);
+	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	dst_vq->lock = &rkvdec->vdev_lock;
+	dst_vq->dev = rkvdec->v4l2_dev.dev;
+
+	return vb2_queue_init(dst_vq);
+}
+
+static int rkvdec_add_ctrls(struct rkvdec_ctx *ctx,
+			    const struct rkvdec_ctrls *ctrls)
+{
+	unsigned int i;
+
+	for (i = 0; i < ctrls->num_ctrls; i++) {
+		const struct v4l2_ctrl_config *cfg = &ctrls->ctrls[i].cfg;
+
+		v4l2_ctrl_new_custom(&ctx->ctrl_hdl, cfg, ctx);
+		if (ctx->ctrl_hdl.error)
+			return ctx->ctrl_hdl.error;
+	}
+
+	return 0;
+}
+
+static int rkvdec_init_ctrls(struct rkvdec_ctx *ctx)
+{
+	unsigned int i, nctrls = 0;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(rkvdec_coded_fmts); i++)
+		nctrls += rkvdec_coded_fmts[i].ctrls->num_ctrls;
+
+	v4l2_ctrl_handler_init(&ctx->ctrl_hdl, nctrls);
+
+	for (i = 0; i < ARRAY_SIZE(rkvdec_coded_fmts); i++) {
+		ret = rkvdec_add_ctrls(ctx, rkvdec_coded_fmts[i].ctrls);
+		if (ret)
+			goto err_free_handler;
+	}
+
+	ret = v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
+	if (ret)
+		goto err_free_handler;
+
+	ctx->fh.ctrl_handler = &ctx->ctrl_hdl;
+	return 0;
+
+err_free_handler:
+	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
+	return ret;
+}
+
+static int rkvdec_open(struct file *filp)
+{
+	struct rkvdec_dev *rkvdec = video_drvdata(filp);
+	struct rkvdec_ctx *ctx;
+	int ret;
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->dev = rkvdec;
+	rkvdec_reset_coded_fmt(ctx);
+	rkvdec_reset_decoded_fmt(ctx);
+	v4l2_fh_init(&ctx->fh, video_devdata(filp));
+
+	ret = rkvdec_init_ctrls(ctx);
+	if (ret)
+		goto err_free_ctx;
+
+	ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(rkvdec->m2m_dev, ctx,
+					    rkvdec_queue_init);
+	if (IS_ERR(ctx->fh.m2m_ctx)) {
+		ret = PTR_ERR(ctx->fh.m2m_ctx);
+		goto err_cleanup_ctrls;
+	}
+
+	filp->private_data = &ctx->fh;
+	v4l2_fh_add(&ctx->fh);
+
+	return 0;
+
+err_cleanup_ctrls:
+	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
+
+err_free_ctx:
+	kfree(ctx);
+	return ret;
+}
+
+static int rkvdec_release(struct file *filp)
+{
+	struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(filp->private_data);
+
+	v4l2_fh_del(&ctx->fh);
+	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
+	v4l2_fh_exit(&ctx->fh);
+	kfree(ctx);
+
+	return 0;
+}
+
+static const struct v4l2_file_operations rkvdec_fops = {
+	.owner = THIS_MODULE,
+	.open = rkvdec_open,
+	.release = rkvdec_release,
+	.poll = v4l2_m2m_fop_poll,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = v4l2_m2m_fop_mmap,
+};
+
+static int rkvdec_v4l2_init(struct rkvdec_dev *rkvdec)
+{
+	int ret;
+
+	ret = v4l2_device_register(rkvdec->dev, &rkvdec->v4l2_dev);
+	if (ret) {
+		dev_err(rkvdec->dev, "Failed to register V4L2 device\n");
+		return ret;
+	}
+
+	rkvdec->m2m_dev = v4l2_m2m_init(&rkvdec_m2m_ops);
+	if (IS_ERR(rkvdec->m2m_dev)) {
+		v4l2_err(&rkvdec->v4l2_dev, "Failed to init mem2mem device\n");
+		ret = PTR_ERR(rkvdec->m2m_dev);
+		goto err_unregister_v4l2;
+	}
+
+	rkvdec->mdev.dev = rkvdec->dev;
+	strscpy(rkvdec->mdev.model, "rkvdec", sizeof(rkvdec->mdev.model));
+	strscpy(rkvdec->mdev.bus_info, "platform:rkvdec",
+		sizeof(rkvdec->mdev.bus_info));
+	media_device_init(&rkvdec->mdev);
+	rkvdec->mdev.ops = &rkvdec_media_ops;
+	rkvdec->v4l2_dev.mdev = &rkvdec->mdev;
+
+	rkvdec->vdev.lock = &rkvdec->vdev_lock;
+	rkvdec->vdev.v4l2_dev = &rkvdec->v4l2_dev;
+	rkvdec->vdev.fops = &rkvdec_fops;
+	rkvdec->vdev.release = video_device_release_empty;
+	rkvdec->vdev.vfl_dir = VFL_DIR_M2M;
+	rkvdec->vdev.device_caps = V4L2_CAP_STREAMING |
+				   V4L2_CAP_VIDEO_M2M_MPLANE;
+	rkvdec->vdev.ioctl_ops = &rkvdec_ioctl_ops;
+	video_set_drvdata(&rkvdec->vdev, rkvdec);
+	strscpy(rkvdec->vdev.name, "rkvdec", sizeof(rkvdec->vdev.name));
+
+	ret = video_register_device(&rkvdec->vdev, VFL_TYPE_VIDEO, -1);
+	if (ret) {
+		v4l2_err(&rkvdec->v4l2_dev, "Failed to register video device\n");
+		goto err_cleanup_mc;
+	}
+
+	ret = v4l2_m2m_register_media_controller(rkvdec->m2m_dev, &rkvdec->vdev,
+						 MEDIA_ENT_F_PROC_VIDEO_DECODER);
+	if (ret) {
+		v4l2_err(&rkvdec->v4l2_dev,
+			 "Failed to initialize V4L2 M2M media controller\n");
+		goto err_unregister_vdev;
+	}
+
+	ret = media_device_register(&rkvdec->mdev);
+	if (ret) {
+		v4l2_err(&rkvdec->v4l2_dev, "Failed to register media device\n");
+		goto err_unregister_mc;
+	}
+
+	return 0;
+
+err_unregister_mc:
+	v4l2_m2m_unregister_media_controller(rkvdec->m2m_dev);
+
+err_unregister_vdev:
+	video_unregister_device(&rkvdec->vdev);
+
+err_cleanup_mc:
+	media_device_cleanup(&rkvdec->mdev);
+	v4l2_m2m_release(rkvdec->m2m_dev);
+
+err_unregister_v4l2:
+	v4l2_device_unregister(&rkvdec->v4l2_dev);
+	return ret;
+}
+
+static void rkvdec_v4l2_cleanup(struct rkvdec_dev *rkvdec)
+{
+	media_device_unregister(&rkvdec->mdev);
+	v4l2_m2m_unregister_media_controller(rkvdec->m2m_dev);
+	video_unregister_device(&rkvdec->vdev);
+	media_device_cleanup(&rkvdec->mdev);
+	v4l2_m2m_release(rkvdec->m2m_dev);
+	v4l2_device_unregister(&rkvdec->v4l2_dev);
+}
+
+static irqreturn_t rkvdec_irq_handler(int irq, void *priv)
+{
+	struct rkvdec_dev *rkvdec = priv;
+	enum vb2_buffer_state state;
+	u32 status;
+
+	status = readl(rkvdec->regs + RKVDEC_REG_INTERRUPT);
+	state = (status & RKVDEC_RDY_STA) ?
+		VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
+
+	writel(0, rkvdec->regs + RKVDEC_REG_INTERRUPT);
+	if (cancel_delayed_work(&rkvdec->watchdog_work)) {
+		struct rkvdec_ctx *ctx;
+
+		ctx = v4l2_m2m_get_curr_priv(rkvdec->m2m_dev);
+		rkvdec_job_finish(ctx, state);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void rkvdec_watchdog_func(struct work_struct *work)
+{
+	struct rkvdec_dev *rkvdec;
+	struct rkvdec_ctx *ctx;
+
+	rkvdec = container_of(to_delayed_work(work), struct rkvdec_dev,
+			      watchdog_work);
+	ctx = v4l2_m2m_get_curr_priv(rkvdec->m2m_dev);
+	if (ctx) {
+		dev_err(rkvdec->dev, "Frame processing timed out!\n");
+		writel(RKVDEC_IRQ_DIS, rkvdec->regs + RKVDEC_REG_INTERRUPT);
+		writel(0, rkvdec->regs + RKVDEC_REG_SYSCTRL);
+		rkvdec_job_finish(ctx, VB2_BUF_STATE_ERROR);
+	}
+}
+
+static const struct of_device_id of_rkvdec_match[] = {
+	{ .compatible = "rockchip,rk3399-vdec" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_rkvdec_match);
+
+static const char * const rkvdec_clk_names[] = {
+	"axi", "ahb", "cabac", "core"
+};
+
+static int rkvdec_probe(struct platform_device *pdev)
+{
+	struct rkvdec_dev *rkvdec;
+	struct resource *res;
+	unsigned int i;
+	int ret, irq;
+
+	rkvdec = devm_kzalloc(&pdev->dev, sizeof(*rkvdec), GFP_KERNEL);
+	if (!rkvdec)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, rkvdec);
+	rkvdec->dev = &pdev->dev;
+	mutex_init(&rkvdec->vdev_lock);
+	INIT_DELAYED_WORK(&rkvdec->watchdog_work, rkvdec_watchdog_func);
+
+	rkvdec->clocks = devm_kcalloc(&pdev->dev, ARRAY_SIZE(rkvdec_clk_names),
+				      sizeof(*rkvdec->clocks), GFP_KERNEL);
+	if (!rkvdec->clocks)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(rkvdec_clk_names); i++)
+		rkvdec->clocks[i].id = rkvdec_clk_names[i];
+
+	ret = devm_clk_bulk_get(&pdev->dev, ARRAY_SIZE(rkvdec_clk_names),
+				rkvdec->clocks);
+	if (ret)
+		return ret;
+
+	/*
+	 * Bump ACLK to max. possible freq. (500 MHz) to improve performance
+	 * When 4k video playback.
+	 */
+	clk_set_rate(rkvdec->clocks[0].clk, 500 * 1000 * 1000);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rkvdec->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rkvdec->regs))
+		return PTR_ERR(rkvdec->regs);
+
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(&pdev->dev, "Could not set DMA coherent mask.\n");
+		return ret;
+	}
+
+	vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev, "Could not get vdec IRQ\n");
+		return -ENXIO;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					rkvdec_irq_handler, IRQF_ONESHOT,
+					dev_name(&pdev->dev), rkvdec);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not request vdec IRQ\n");
+		return ret;
+	}
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 100);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	ret = rkvdec_v4l2_init(rkvdec);
+	if (ret)
+		goto err_disable_runtime_pm;
+
+	return 0;
+
+err_disable_runtime_pm:
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	return ret;
+}
+
+static int rkvdec_remove(struct platform_device *pdev)
+{
+	struct rkvdec_dev *rkvdec = platform_get_drvdata(pdev);
+
+	rkvdec_v4l2_cleanup(rkvdec);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int rkvdec_runtime_resume(struct device *dev)
+{
+	struct rkvdec_dev *rkvdec = dev_get_drvdata(dev);
+
+	return clk_bulk_prepare_enable(ARRAY_SIZE(rkvdec_clk_names),
+				       rkvdec->clocks);
+}
+
+static int rkvdec_runtime_suspend(struct device *dev)
+{
+	struct rkvdec_dev *rkvdec = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(ARRAY_SIZE(rkvdec_clk_names),
+				   rkvdec->clocks);
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops rkvdec_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(rkvdec_runtime_suspend, rkvdec_runtime_resume, NULL)
+};
+
+static struct platform_driver rkvdec_driver = {
+	.probe = rkvdec_probe,
+	.remove = rkvdec_remove,
+	.driver = {
+		   .name = "rkvdec",
+		   .of_match_table = of_match_ptr(of_rkvdec_match),
+		   .pm = &rkvdec_pm_ops,
+	},
+};
+module_platform_driver(rkvdec_driver);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@collabora.com>");
+MODULE_DESCRIPTION("Rockchip Video Decoder driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/media/rkvdec/rkvdec.h b/drivers/staging/media/rkvdec/rkvdec.h
new file mode 100644
index 000000000000..2fc9f46b6910
--- /dev/null
+++ b/drivers/staging/media/rkvdec/rkvdec.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Rockchip Video Decoder driver
+ *
+ * Copyright (C) 2019 Collabora, Ltd.
+ *
+ * Based on rkvdec driver by Google LLC. (Tomasz Figa <tfiga@chromium.org>)
+ * Based on s5p-mfc driver by Samsung Electronics Co., Ltd.
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ */
+#ifndef RKVDEC_H_
+#define RKVDEC_H_
+
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <linux/wait.h>
+#include <linux/clk.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-dma-contig.h>
+
+struct rkvdec_ctx;
+
+struct rkvdec_ctrl_desc {
+	u32 per_request : 1;
+	u32 mandatory : 1;
+	struct v4l2_ctrl_config cfg;
+};
+
+struct rkvdec_ctrls {
+	const struct rkvdec_ctrl_desc *ctrls;
+	unsigned int num_ctrls;
+};
+
+struct rkvdec_run {
+	struct {
+		struct vb2_v4l2_buffer *src;
+		struct vb2_v4l2_buffer *dst;
+	} bufs;
+};
+
+struct rkvdec_vp9_decoded_buffer_info {
+	/* Info needed when the decoded frame serves as a reference frame. */
+	u16 width;
+	u16 height;
+	u32 bit_depth : 4;
+};
+
+struct rkvdec_decoded_buffer {
+	/* Must be the first field in this struct. */
+	struct v4l2_m2m_buffer base;
+};
+
+static inline struct rkvdec_decoded_buffer *
+vb2_to_rkvdec_decoded_buf(struct vb2_buffer *buf)
+{
+	return container_of(buf, struct rkvdec_decoded_buffer,
+			    base.vb.vb2_buf);
+}
+
+struct rkvdec_coded_fmt_ops {
+	int (*adjust_fmt)(struct rkvdec_ctx *ctx,
+			  struct v4l2_format *f);
+	int (*start)(struct rkvdec_ctx *ctx);
+	void (*stop)(struct rkvdec_ctx *ctx);
+	int (*run)(struct rkvdec_ctx *ctx);
+	void (*done)(struct rkvdec_ctx *ctx, struct vb2_v4l2_buffer *src_buf,
+		     struct vb2_v4l2_buffer *dst_buf,
+		     enum vb2_buffer_state result);
+};
+
+struct rkvdec_coded_fmt_desc {
+	u32 fourcc;
+	struct v4l2_frmsize_stepwise frmsize;
+	const struct rkvdec_ctrls *ctrls;
+	const struct rkvdec_coded_fmt_ops *ops;
+	unsigned int num_decoded_fmts;
+	const u32 *decoded_fmts;
+};
+
+struct rkvdec_dev {
+	struct v4l2_device v4l2_dev;
+	struct media_device mdev;
+	struct video_device vdev;
+	struct v4l2_m2m_dev *m2m_dev;
+	struct device *dev;
+	struct clk_bulk_data *clocks;
+	void __iomem *regs;
+	struct mutex vdev_lock; /* serializes ioctls */
+	struct delayed_work watchdog_work;
+};
+
+struct rkvdec_ctx {
+	struct v4l2_fh fh;
+	struct v4l2_format coded_fmt;
+	struct v4l2_format decoded_fmt;
+	const struct rkvdec_coded_fmt_desc *coded_fmt_desc;
+	struct v4l2_ctrl_handler ctrl_hdl;
+	struct rkvdec_dev *dev;
+	void *priv;
+};
+
+static inline struct rkvdec_ctx *fh_to_rkvdec_ctx(struct v4l2_fh *fh)
+{
+	return container_of(fh, struct rkvdec_ctx, fh);
+}
+
+struct rkvdec_aux_buf {
+	void *cpu;
+	dma_addr_t dma;
+	size_t size;
+};
+
+void rkvdec_run_preamble(struct rkvdec_ctx *ctx, struct rkvdec_run *run);
+void rkvdec_run_postamble(struct rkvdec_ctx *ctx, struct rkvdec_run *run);
+
+extern const struct rkvdec_coded_fmt_ops rkvdec_h264_fmt_ops;
+#endif /* RKVDEC_H_ */
diff --git a/drivers/staging/media/soc_camera/soc-camera.rst b/drivers/staging/media/soc_camera/soc-camera.rst
new file mode 100644
index 000000000000..7c39711aebf8
--- /dev/null
+++ b/drivers/staging/media/soc_camera/soc-camera.rst
@@ -0,0 +1,171 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Soc-Camera Drivers
+======================
+
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+Terminology
+-----------
+
+The following terms are used in this document:
+ - camera / camera device / camera sensor - a video-camera sensor chip, capable
+   of connecting to a variety of systems and interfaces, typically uses i2c for
+   control and configuration, and a parallel or a serial bus for data.
+ - camera host - an interface, to which a camera is connected. Typically a
+   specialised interface, present on many SoCs, e.g. PXA27x and PXA3xx, SuperH,
+   i.MX27, i.MX31.
+ - camera host bus - a connection between a camera host and a camera. Can be
+   parallel or serial, consists of data and control lines, e.g. clock, vertical
+   and horizontal synchronization signals.
+
+Purpose of the soc-camera subsystem
+-----------------------------------
+
+The soc-camera subsystem initially provided a unified API between camera host
+drivers and camera sensor drivers. Later the soc-camera sensor API has been
+replaced with the V4L2 standard subdev API. This also made camera driver re-use
+with non-soc-camera hosts possible. The camera host API to the soc-camera core
+has been preserved.
+
+Soc-camera implements a V4L2 interface to the user, currently only the "mmap"
+method is supported by host drivers. However, the soc-camera core also provides
+support for the "read" method.
+
+The subsystem has been designed to support multiple camera host interfaces and
+multiple cameras per interface, although most applications have only one camera
+sensor.
+
+Existing drivers
+----------------
+
+As of 3.7 there are seven host drivers in the mainline: atmel-isi.c,
+mx1_camera.c (broken, scheduled for removal), mx2_camera.c, mx3_camera.c,
+omap1_camera.c, pxa_camera.c, sh_mobile_ceu_camera.c, and multiple sensor
+drivers under drivers/media/i2c/soc_camera/.
+
+Camera host API
+---------------
+
+A host camera driver is registered using the
+
+.. code-block:: none
+
+	soc_camera_host_register(struct soc_camera_host *);
+
+function. The host object can be initialized as follows:
+
+.. code-block:: none
+
+	struct soc_camera_host	*ici;
+	ici->drv_name		= DRV_NAME;
+	ici->ops		= &camera_host_ops;
+	ici->priv		= pcdev;
+	ici->v4l2_dev.dev	= &pdev->dev;
+	ici->nr			= pdev->id;
+
+All camera host methods are passed in a struct soc_camera_host_ops:
+
+.. code-block:: none
+
+	static struct soc_camera_host_ops camera_host_ops = {
+		.owner		= THIS_MODULE,
+		.add		= camera_add_device,
+		.remove		= camera_remove_device,
+		.set_fmt	= camera_set_fmt_cap,
+		.try_fmt	= camera_try_fmt_cap,
+		.init_videobuf2	= camera_init_videobuf2,
+		.poll		= camera_poll,
+		.querycap	= camera_querycap,
+		.set_bus_param	= camera_set_bus_param,
+		/* The rest of host operations are optional */
+	};
+
+.add and .remove methods are called when a sensor is attached to or detached
+from the host. .set_bus_param is used to configure physical connection
+parameters between the host and the sensor. .init_videobuf2 is called by
+soc-camera core when a video-device is opened, the host driver would typically
+call vb2_queue_init() in this method. Further video-buffer management is
+implemented completely by the specific camera host driver. If the host driver
+supports non-standard pixel format conversion, it should implement a
+.get_formats and, possibly, a .put_formats operations. See below for more
+details about format conversion. The rest of the methods are called from
+respective V4L2 operations.
+
+Camera API
+----------
+
+Sensor drivers can use struct soc_camera_link, typically provided by the
+platform, and used to specify to which camera host bus the sensor is connected,
+and optionally provide platform .power and .reset methods for the camera. This
+struct is provided to the camera driver via the I2C client device platform data
+and can be obtained, using the soc_camera_i2c_to_link() macro. Care should be
+taken, when using soc_camera_vdev_to_subdev() and when accessing struct
+soc_camera_device, using v4l2_get_subdev_hostdata(): both only work, when
+running on an soc-camera host. The actual camera driver operation is implemented
+using the V4L2 subdev API. Additionally soc-camera camera drivers can use
+auxiliary soc-camera helper functions like soc_camera_power_on() and
+soc_camera_power_off(), which switch regulators, provided by the platform and call
+board-specific power switching methods. soc_camera_apply_board_flags() takes
+camera bus configuration capability flags and applies any board transformations,
+e.g. signal polarity inversion. soc_mbus_get_fmtdesc() can be used to obtain a
+pixel format descriptor, corresponding to a certain media-bus pixel format code.
+soc_camera_limit_side() can be used to restrict beginning and length of a frame
+side, based on camera capabilities.
+
+VIDIOC_S_CROP and VIDIOC_S_FMT behaviour
+----------------------------------------
+
+Above user ioctls modify image geometry as follows:
+
+VIDIOC_S_CROP: sets location and sizes of the sensor window. Unit is one sensor
+pixel. Changing sensor window sizes preserves any scaling factors, therefore
+user window sizes change as well.
+
+VIDIOC_S_FMT: sets user window. Should preserve previously set sensor window as
+much as possible by modifying scaling factors. If the sensor window cannot be
+preserved precisely, it may be changed too.
+
+In soc-camera there are two locations, where scaling and cropping can take
+place: in the camera driver and in the host driver. User ioctls are first passed
+to the host driver, which then generally passes them down to the camera driver.
+It is more efficient to perform scaling and cropping in the camera driver to
+save camera bus bandwidth and maximise the framerate. However, if the camera
+driver failed to set the required parameters with sufficient precision, the host
+driver may decide to also use its own scaling and cropping to fulfill the user's
+request.
+
+Camera drivers are interfaced to the soc-camera core and to host drivers over
+the v4l2-subdev API, which is completely functional, it doesn't pass any data.
+Therefore all camera drivers shall reply to .g_fmt() requests with their current
+output geometry. This is necessary to correctly configure the camera bus.
+.s_fmt() and .try_fmt() have to be implemented too. Sensor window and scaling
+factors have to be maintained by camera drivers internally. According to the
+V4L2 API all capture drivers must support the VIDIOC_CROPCAP ioctl, hence we
+rely on camera drivers implementing .cropcap(). If the camera driver does not
+support cropping, it may choose to not implement .s_crop(), but to enable
+cropping support by the camera host driver at least the .g_crop method must be
+implemented.
+
+User window geometry is kept in .user_width and .user_height fields in struct
+soc_camera_device and used by the soc-camera core and host drivers. The core
+updates these fields upon successful completion of a .s_fmt() call, but if these
+fields change elsewhere, e.g. during .s_crop() processing, the host driver is
+responsible for updating them.
+
+Format conversion
+-----------------
+
+V4L2 distinguishes between pixel formats, as they are stored in memory, and as
+they are transferred over a media bus. Soc-camera provides support to
+conveniently manage these formats. A table of standard transformations is
+maintained by soc-camera core, which describes, what FOURCC pixel format will
+be obtained, if a media-bus pixel format is stored in memory according to
+certain rules. E.g. if MEDIA_BUS_FMT_YUYV8_2X8 data is sampled with 8 bits per
+sample and stored in memory in the little-endian order with no gaps between
+bytes, data in memory will represent the V4L2_PIX_FMT_YUYV FOURCC format. These
+standard transformations will be used by soc-camera or by camera host drivers to
+configure camera drivers to produce the FOURCC format, requested by the user,
+using the VIDIOC_S_FMT ioctl(). Apart from those standard format conversions,
+host drivers can also provide their own conversion rules by implementing a
+.get_formats and, if required, a .put_formats methods.
diff --git a/drivers/staging/media/sunxi/cedrus/Kconfig b/drivers/staging/media/sunxi/cedrus/Kconfig
index 17733e9a088f..da369950bbf2 100644
--- a/drivers/staging/media/sunxi/cedrus/Kconfig
+++ b/drivers/staging/media/sunxi/cedrus/Kconfig
@@ -1,10 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
 config VIDEO_SUNXI_CEDRUS
 	tristate "Allwinner Cedrus VPU driver"
-	depends on VIDEO_DEV && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on VIDEO_DEV && VIDEO_V4L2
 	depends on HAS_DMA
 	depends on OF
-	depends on MEDIA_CONTROLLER_REQUEST_API
+	select MEDIA_CONTROLLER
+	select MEDIA_CONTROLLER_REQUEST_API
 	select SUNXI_SRAM
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_MEM2MEM_DEV
diff --git a/drivers/staging/media/usbvision/Kconfig b/drivers/staging/media/usbvision/Kconfig
index c6e1afb5ac48..1c7da2a2caac 100644
--- a/drivers/staging/media/usbvision/Kconfig
+++ b/drivers/staging/media/usbvision/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config VIDEO_USBVISION
 	tristate "USB video devices based on Nogatech NT1003/1004/1005 (Deprecated)"
-	depends on MEDIA_USB_SUPPORT && I2C && VIDEO_V4L2
+	depends on MEDIA_USB_SUPPORT && I2C && VIDEO_V4L2 && USB
 	select VIDEO_TUNER
 	select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
 	help
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 9e5cf68731bb..82aa93634eda 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -523,11 +523,10 @@ pcie: pcie@1e140000 {
 			0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
 		>;
 
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xF0000 0 0 1>;
-		interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
-				<0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
-				<0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH
+				GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
+				GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
 
 		status = "disabled";
 
diff --git a/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.txt b/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.txt
deleted file mode 100644
index a369d715378b..000000000000
--- a/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Mediatek Mt7621 PCIe PHY
-
-Required properties:
-- compatible: must be "mediatek,mt7621-pci-phy"
-- reg: base address and length of the PCIe PHY block
-- #phy-cells: must be <1> for pcie0_phy and for pcie1_phy.
-
-Example:
-	pcie0_phy: pcie-phy@1e149000 {
-		compatible = "mediatek,mt7621-pci-phy";
-		reg = <0x1e149000 0x0700>;
-		#phy-cells = <1>;
-	};
-
-	pcie1_phy: pcie-phy@1e14a000 {
-		compatible = "mediatek,mt7621-pci-phy";
-		reg = <0x1e14a000 0x0700>;
-		#phy-cells = <1>;
-	};
-
-	/* users of the PCIe phy */
-
-	pcie: pcie@1e140000 {
-		...
-		...
-		phys = <&pcie0_phy 0>, <&pcie0_phy 1>, <&pcie1_phy 0>;
-		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
-	};
diff --git a/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.yaml b/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.yaml
new file mode 100644
index 000000000000..cf32bbc45b5d
--- /dev/null
+++ b/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Mediatek Mt7621 PCIe PHY Device Tree Bindings
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    const: mediatek,mt7621-pci-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+    description: selects if the phy is dual-ported
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0_phy: pcie-phy@1e149000 {
+      compatible = "mediatek,mt7621-pci-phy";
+      reg = <0x1e149000 0x0700>;
+      #phy-cells = <1>;
+    };
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index f58e3a51fc71..f961b353c22e 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -55,7 +55,7 @@
 #define RALINK_PCI_IOBASE		0x002C
 
 /* PCICFG virtual bridges */
-#define PCIE_P2P_MAX			3
+#define PCIE_P2P_CNT			3
 #define PCIE_P2P_BR_DEVNUM_SHIFT(p)	(16 + (p) * 4)
 #define PCIE_P2P_BR_DEVNUM0_SHIFT	PCIE_P2P_BR_DEVNUM_SHIFT(0)
 #define PCIE_P2P_BR_DEVNUM1_SHIFT	PCIE_P2P_BR_DEVNUM_SHIFT(1)
@@ -97,6 +97,7 @@
  * @pcie_rst: pointer to port reset control
  * @gpio_rst: gpio reset
  * @slot: port slot
+ * @irq: GIC irq
  * @enabled: indicates if port is enabled
  */
 struct mt7621_pcie_port {
@@ -107,6 +108,7 @@ struct mt7621_pcie_port {
 	struct reset_control *pcie_rst;
 	struct gpio_desc *gpio_rst;
 	u32 slot;
+	int irq;
 	bool enabled;
 };
 
@@ -120,6 +122,7 @@ struct mt7621_pcie_port {
  * @dev: Pointer to PCIe device
  * @io_map_base: virtual memory base address for io
  * @ports: pointer to PCIe port information
+ * @irq_map: irq mapping info according pcie link status
  * @resets_inverted: depends on chip revision
  * reset lines are inverted.
  */
@@ -135,6 +138,7 @@ struct mt7621_pcie {
 	} offset;
 	unsigned long io_map_base;
 	struct list_head ports;
+	int irq_map[PCIE_P2P_CNT];
 	bool resets_inverted;
 };
 
@@ -279,6 +283,16 @@ static void setup_cm_memory_region(struct mt7621_pcie *pcie)
 	}
 }
 
+static int mt7621_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	struct mt7621_pcie *pcie = pdev->bus->sysdata;
+	struct device *dev = pcie->dev;
+	int irq = pcie->irq_map[slot];
+
+	dev_info(dev, "bus=%d slot=%d irq=%d\n", pdev->bus->number, slot, irq);
+	return irq;
+}
+
 static int mt7621_pci_parse_request_of_pci_ranges(struct mt7621_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
@@ -330,6 +344,7 @@ static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
 {
 	struct mt7621_pcie_port *port;
 	struct device *dev = pcie->dev;
+	struct platform_device *pdev = to_platform_device(dev);
 	struct device_node *pnode = dev->of_node;
 	struct resource regs;
 	char name[10];
@@ -371,6 +386,12 @@ static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
 	port->slot = slot;
 	port->pcie = pcie;
 
+	port->irq = platform_get_irq(pdev, slot);
+	if (port->irq < 0) {
+		dev_err(dev, "Failed to get IRQ for PCIe%d\n", slot);
+		return -ENXIO;
+	}
+
 	INIT_LIST_HEAD(&port->list);
 	list_add_tail(&port->list, &pcie->ports);
 
@@ -502,17 +523,25 @@ static void mt7621_pcie_init_ports(struct mt7621_pcie *pcie)
 
 	mt7621_pcie_reset_ep_deassert(pcie);
 
+	tmp = NULL;
 	list_for_each_entry(port, &pcie->ports, list) {
 		u32 slot = port->slot;
 
 		if (!mt7621_pcie_port_is_linkup(port)) {
 			dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n",
 				slot);
-			if (slot != 1)
-				phy_power_off(port->phy);
 			mt7621_control_assert(port);
 			mt7621_pcie_port_clk_disable(port);
 			port->enabled = false;
+
+			if (slot == 0) {
+				tmp = port;
+				continue;
+			}
+
+			if (slot == 1 && tmp && !tmp->enabled)
+				phy_power_off(tmp->phy);
+
 		}
 	}
 }
@@ -576,14 +605,16 @@ static void mt7621_pcie_enable_ports(struct mt7621_pcie *pcie)
 static int mt7621_pcie_init_virtual_bridges(struct mt7621_pcie *pcie)
 {
 	u32 pcie_link_status = 0;
-	u32 n;
-	int i;
-	u32 p2p_br_devnum[PCIE_P2P_MAX];
+	u32 n = 0;
+	int i = 0;
+	u32 p2p_br_devnum[PCIE_P2P_CNT];
+	int irqs[PCIE_P2P_CNT];
 	struct mt7621_pcie_port *port;
 
 	list_for_each_entry(port, &pcie->ports, list) {
 		u32 slot = port->slot;
 
+		irqs[i++] = port->irq;
 		if (port->enabled)
 			pcie_link_status |= BIT(slot);
 	}
@@ -591,12 +622,16 @@ static int mt7621_pcie_init_virtual_bridges(struct mt7621_pcie *pcie)
 	if (pcie_link_status == 0)
 		return -1;
 
-	n = 0;
-	for (i = 0; i < PCIE_P2P_MAX; i++)
+	/*
+	 * Assign device numbers from zero to the enabled ports,
+	 * then assigning remaining device numbers to any disabled
+	 * ports.
+	 */
+	for (i = 0; i < PCIE_P2P_CNT; i++)
 		if (pcie_link_status & BIT(i))
 			p2p_br_devnum[i] = n++;
 
-	for (i = 0; i < PCIE_P2P_MAX; i++)
+	for (i = 0; i < PCIE_P2P_CNT; i++)
 		if ((pcie_link_status & BIT(i)) == 0)
 			p2p_br_devnum[i] = n++;
 
@@ -606,6 +641,15 @@ static int mt7621_pcie_init_virtual_bridges(struct mt7621_pcie *pcie)
 		 (p2p_br_devnum[1] << PCIE_P2P_BR_DEVNUM1_SHIFT) |
 		 (p2p_br_devnum[2] << PCIE_P2P_BR_DEVNUM2_SHIFT));
 
+	/* Assign IRQs */
+	n = 0;
+	for (i = 0; i < PCIE_P2P_CNT; i++)
+		if (pcie_link_status & BIT(i))
+			pcie->irq_map[n++] = irqs[i];
+
+	for (i = n; i < PCIE_P2P_CNT; i++)
+		pcie->irq_map[i] = -1;
+
 	return 0;
 }
 
@@ -630,7 +674,7 @@ static int mt7621_pcie_register_host(struct pci_host_bridge *host,
 	host->busnr = pcie->busn.start;
 	host->dev.parent = pcie->dev;
 	host->ops = &mt7621_pci_ops;
-	host->map_irq = of_irq_parse_and_map_pci;
+	host->map_irq = mt7621_map_irq;
 	host->swizzle_irq = pci_common_swizzle;
 	host->sysdata = pcie;
 
diff --git a/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c b/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
index d0f06790d38f..caaf9e34f1ee 100644
--- a/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
+++ b/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
@@ -220,7 +220,7 @@ static int rt2880_pinmux_index(struct rt2880_priv *p)
 	/* allocate our function and group mapping index buffers */
 	f = p->func = devm_kcalloc(p->dev,
 				   p->func_count,
-				   sizeof(struct rt2880_pmx_func),
+				   sizeof(*p->func),
 				   GFP_KERNEL);
 	gpio_func.groups = devm_kcalloc(p->dev, p->group_count, sizeof(int),
 					GFP_KERNEL);
diff --git a/drivers/staging/qlge/qlge_dbg.c b/drivers/staging/qlge/qlge_dbg.c
index 1795533cbd3a..058889687907 100644
--- a/drivers/staging/qlge/qlge_dbg.c
+++ b/drivers/staging/qlge/qlge_dbg.c
@@ -1559,18 +1559,17 @@ void ql_dump_stat(struct ql_adapter *qdev)
 #ifdef QL_DEV_DUMP
 
 #define DUMP_QDEV_FIELD(qdev, type, field)		\
-	pr_err("qdev->%-24s = " type "\n", #field, (qdev)->(field))
+	pr_err("qdev->%-24s = " type "\n", #field, (qdev)->field)
 #define DUMP_QDEV_DMA_FIELD(qdev, field)		\
 	pr_err("qdev->%-24s = %llx\n", #field, (unsigned long long)qdev->field)
 #define DUMP_QDEV_ARRAY(qdev, type, array, index, field) \
 	pr_err("%s[%d].%s = " type "\n",		 \
-	       #array, index, #field, (qdev)->array[index].field);
+	       #array, index, #field, (qdev)->array[index].field)
 void ql_dump_qdev(struct ql_adapter *qdev)
 {
 	int i;
 
 	DUMP_QDEV_FIELD(qdev, "%lx", flags);
-	DUMP_QDEV_FIELD(qdev, "%p", vlgrp);
 	DUMP_QDEV_FIELD(qdev, "%p", pdev);
 	DUMP_QDEV_FIELD(qdev, "%p", ndev);
 	DUMP_QDEV_FIELD(qdev, "%d", chip_rev_id);
@@ -1758,8 +1757,6 @@ void ql_dump_rx_ring(struct rx_ring *rx_ring)
 	       rx_ring->lbq.prod_idx_db_reg);
 	pr_err("rx_ring->lbq.next_to_use = %d\n", rx_ring->lbq.next_to_use);
 	pr_err("rx_ring->lbq.next_to_clean = %d\n", rx_ring->lbq.next_to_clean);
-	pr_err("rx_ring->lbq_clean_idx = %d\n", rx_ring->lbq_clean_idx);
-	pr_err("rx_ring->lbq_free_cnt = %d\n", rx_ring->lbq_free_cnt);
 
 	pr_err("rx_ring->sbq.base = %p\n", rx_ring->sbq.base);
 	pr_err("rx_ring->sbq.base_dma = %llx\n",
diff --git a/drivers/staging/qlge/qlge_main.c b/drivers/staging/qlge/qlge_main.c
index c92820f07968..d7e4dfafc1a3 100644
--- a/drivers/staging/qlge/qlge_main.c
+++ b/drivers/staging/qlge/qlge_main.c
@@ -214,12 +214,13 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 	u32 mask;
 	u32 value;
 
-	direction =
-	    (bit & (CFG_LRQ | CFG_LR | CFG_LCQ)) ? PCI_DMA_TODEVICE :
-	    PCI_DMA_FROMDEVICE;
+	if (bit & (CFG_LRQ | CFG_LR | CFG_LCQ))
+		direction = DMA_TO_DEVICE;
+	else
+		direction = DMA_FROM_DEVICE;
 
-	map = pci_map_single(qdev->pdev, ptr, size, direction);
-	if (pci_dma_mapping_error(qdev->pdev, map)) {
+	map = dma_map_single(&qdev->pdev->dev, ptr, size, direction);
+	if (dma_mapping_error(&qdev->pdev->dev, map)) {
 		netif_err(qdev, ifup, qdev->ndev, "Couldn't map DMA area.\n");
 		return -ENOMEM;
 	}
@@ -248,7 +249,7 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 	status = ql_wait_cfg(qdev, bit);
 exit:
 	ql_sem_unlock(qdev, SEM_ICB_MASK);	/* does flush too */
-	pci_unmap_single(qdev->pdev, map, size, direction);
+	dma_unmap_single(&qdev->pdev->dev, map, size, direction);
 	return status;
 }
 
@@ -983,14 +984,14 @@ static struct qlge_bq_desc *ql_get_curr_lchunk(struct ql_adapter *qdev,
 {
 	struct qlge_bq_desc *lbq_desc = qlge_get_curr_buf(&rx_ring->lbq);
 
-	pci_dma_sync_single_for_cpu(qdev->pdev, lbq_desc->dma_addr,
-				    qdev->lbq_buf_size, PCI_DMA_FROMDEVICE);
+	dma_sync_single_for_cpu(&qdev->pdev->dev, lbq_desc->dma_addr,
+				qdev->lbq_buf_size, DMA_FROM_DEVICE);
 
 	if ((lbq_desc->p.pg_chunk.offset + qdev->lbq_buf_size) ==
 	    ql_lbq_block_size(qdev)) {
 		/* last chunk of the master page */
-		pci_unmap_page(qdev->pdev, lbq_desc->dma_addr,
-			       ql_lbq_block_size(qdev), PCI_DMA_FROMDEVICE);
+		dma_unmap_page(&qdev->pdev->dev, lbq_desc->dma_addr,
+			       ql_lbq_block_size(qdev), DMA_FROM_DEVICE);
 	}
 
 	return lbq_desc;
@@ -1036,10 +1037,10 @@ static int qlge_refill_sb(struct rx_ring *rx_ring,
 		return -ENOMEM;
 	skb_reserve(skb, QLGE_SB_PAD);
 
-	sbq_desc->dma_addr = pci_map_single(qdev->pdev, skb->data,
+	sbq_desc->dma_addr = dma_map_single(&qdev->pdev->dev, skb->data,
 					    SMALL_BUF_MAP_SIZE,
-					    PCI_DMA_FROMDEVICE);
-	if (pci_dma_mapping_error(qdev->pdev, sbq_desc->dma_addr)) {
+					    DMA_FROM_DEVICE);
+	if (dma_mapping_error(&qdev->pdev->dev, sbq_desc->dma_addr)) {
 		netif_err(qdev, ifup, qdev->ndev, "PCI mapping failed.\n");
 		dev_kfree_skb_any(skb);
 		return -EIO;
@@ -1064,10 +1065,10 @@ static int qlge_refill_lb(struct rx_ring *rx_ring,
 		page = alloc_pages(gfp | __GFP_COMP, qdev->lbq_buf_order);
 		if (unlikely(!page))
 			return -ENOMEM;
-		dma_addr = pci_map_page(qdev->pdev, page, 0,
+		dma_addr = dma_map_page(&qdev->pdev->dev, page, 0,
 					ql_lbq_block_size(qdev),
-					PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(qdev->pdev, dma_addr)) {
+					DMA_FROM_DEVICE);
+		if (dma_mapping_error(&qdev->pdev->dev, dma_addr)) {
 			__free_pages(page, qdev->lbq_buf_order);
 			netif_err(qdev, drv, qdev->ndev,
 				  "PCI mapping failed.\n");
@@ -1224,20 +1225,20 @@ static void ql_unmap_send(struct ql_adapter *qdev,
 					     qdev->ndev,
 					     "unmapping OAL area.\n");
 			}
-			pci_unmap_single(qdev->pdev,
+			dma_unmap_single(&qdev->pdev->dev,
 					 dma_unmap_addr(&tx_ring_desc->map[i],
 							mapaddr),
 					 dma_unmap_len(&tx_ring_desc->map[i],
 						       maplen),
-					 PCI_DMA_TODEVICE);
+					 DMA_TO_DEVICE);
 		} else {
 			netif_printk(qdev, tx_done, KERN_DEBUG, qdev->ndev,
 				     "unmapping frag %d.\n", i);
-			pci_unmap_page(qdev->pdev,
+			dma_unmap_page(&qdev->pdev->dev,
 				       dma_unmap_addr(&tx_ring_desc->map[i],
 						      mapaddr),
 				       dma_unmap_len(&tx_ring_desc->map[i],
-						     maplen), PCI_DMA_TODEVICE);
+						     maplen), DMA_TO_DEVICE);
 		}
 	}
 
@@ -1263,9 +1264,9 @@ static int ql_map_send(struct ql_adapter *qdev,
 	/*
 	 * Map the skb buffer first.
 	 */
-	map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
+	map = dma_map_single(&qdev->pdev->dev, skb->data, len, DMA_TO_DEVICE);
 
-	err = pci_dma_mapping_error(qdev->pdev, map);
+	err = dma_mapping_error(&qdev->pdev->dev, map);
 	if (err) {
 		netif_err(qdev, tx_queued, qdev->ndev,
 			  "PCI mapping failed with error: %d\n", err);
@@ -1310,10 +1311,10 @@ static int ql_map_send(struct ql_adapter *qdev,
 			 *      etc...
 			 */
 			/* Tack on the OAL in the eighth segment of IOCB. */
-			map = pci_map_single(qdev->pdev, &tx_ring_desc->oal,
+			map = dma_map_single(&qdev->pdev->dev, &tx_ring_desc->oal,
 					     sizeof(struct oal),
-					     PCI_DMA_TODEVICE);
-			err = pci_dma_mapping_error(qdev->pdev, map);
+					     DMA_TO_DEVICE);
+			err = dma_mapping_error(&qdev->pdev->dev, map);
 			if (err) {
 				netif_err(qdev, tx_queued, qdev->ndev,
 					  "PCI mapping outbound address list with error: %d\n",
@@ -1584,8 +1585,8 @@ static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
 	}
 	skb_reserve(new_skb, NET_IP_ALIGN);
 
-	pci_dma_sync_single_for_cpu(qdev->pdev, sbq_desc->dma_addr,
-				    SMALL_BUF_MAP_SIZE, PCI_DMA_FROMDEVICE);
+	dma_sync_single_for_cpu(&qdev->pdev->dev, sbq_desc->dma_addr,
+				SMALL_BUF_MAP_SIZE, DMA_FROM_DEVICE);
 
 	skb_put_data(new_skb, skb->data, length);
 
@@ -1707,8 +1708,8 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 		 * Headers fit nicely into a small buffer.
 		 */
 		sbq_desc = qlge_get_curr_buf(&rx_ring->sbq);
-		pci_unmap_single(qdev->pdev, sbq_desc->dma_addr,
-				 SMALL_BUF_MAP_SIZE, PCI_DMA_FROMDEVICE);
+		dma_unmap_single(&qdev->pdev->dev, sbq_desc->dma_addr,
+				 SMALL_BUF_MAP_SIZE, DMA_FROM_DEVICE);
 		skb = sbq_desc->p.skb;
 		ql_realign_skb(skb, hdr_len);
 		skb_put(skb, hdr_len);
@@ -1737,10 +1738,10 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 			 * buffer.
 			 */
 			sbq_desc = qlge_get_curr_buf(&rx_ring->sbq);
-			pci_dma_sync_single_for_cpu(qdev->pdev,
-						    sbq_desc->dma_addr,
-						    SMALL_BUF_MAP_SIZE,
-						    PCI_DMA_FROMDEVICE);
+			dma_sync_single_for_cpu(&qdev->pdev->dev,
+						sbq_desc->dma_addr,
+						SMALL_BUF_MAP_SIZE,
+						DMA_FROM_DEVICE);
 			skb_put_data(skb, sbq_desc->p.skb->data, length);
 		} else {
 			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
@@ -1750,9 +1751,9 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 			skb = sbq_desc->p.skb;
 			ql_realign_skb(skb, length);
 			skb_put(skb, length);
-			pci_unmap_single(qdev->pdev, sbq_desc->dma_addr,
+			dma_unmap_single(&qdev->pdev->dev, sbq_desc->dma_addr,
 					 SMALL_BUF_MAP_SIZE,
-					 PCI_DMA_FROMDEVICE);
+					 DMA_FROM_DEVICE);
 			sbq_desc->p.skb = NULL;
 		}
 	} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) {
@@ -1787,9 +1788,9 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 					     "No skb available, drop the packet.\n");
 				return NULL;
 			}
-			pci_unmap_page(qdev->pdev, lbq_desc->dma_addr,
+			dma_unmap_page(&qdev->pdev->dev, lbq_desc->dma_addr,
 				       qdev->lbq_buf_size,
-				       PCI_DMA_FROMDEVICE);
+				       DMA_FROM_DEVICE);
 			skb_reserve(skb, NET_IP_ALIGN);
 			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
 				     "%d bytes of headers and data in large. Chain page to new skb and pull tail.\n",
@@ -1820,8 +1821,8 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 		int size, i = 0;
 
 		sbq_desc = qlge_get_curr_buf(&rx_ring->sbq);
-		pci_unmap_single(qdev->pdev, sbq_desc->dma_addr,
-				 SMALL_BUF_MAP_SIZE, PCI_DMA_FROMDEVICE);
+		dma_unmap_single(&qdev->pdev->dev, sbq_desc->dma_addr,
+				 SMALL_BUF_MAP_SIZE, DMA_FROM_DEVICE);
 		if (!(ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS)) {
 			/*
 			 * This is an non TCP/UDP IP frame, so
@@ -2636,17 +2637,17 @@ static netdev_tx_t qlge_send(struct sk_buff *skb, struct net_device *ndev)
 static void ql_free_shadow_space(struct ql_adapter *qdev)
 {
 	if (qdev->rx_ring_shadow_reg_area) {
-		pci_free_consistent(qdev->pdev,
-				    PAGE_SIZE,
-				    qdev->rx_ring_shadow_reg_area,
-				    qdev->rx_ring_shadow_reg_dma);
+		dma_free_coherent(&qdev->pdev->dev,
+				  PAGE_SIZE,
+				  qdev->rx_ring_shadow_reg_area,
+				  qdev->rx_ring_shadow_reg_dma);
 		qdev->rx_ring_shadow_reg_area = NULL;
 	}
 	if (qdev->tx_ring_shadow_reg_area) {
-		pci_free_consistent(qdev->pdev,
-				    PAGE_SIZE,
-				    qdev->tx_ring_shadow_reg_area,
-				    qdev->tx_ring_shadow_reg_dma);
+		dma_free_coherent(&qdev->pdev->dev,
+				  PAGE_SIZE,
+				  qdev->tx_ring_shadow_reg_area,
+				  qdev->tx_ring_shadow_reg_dma);
 		qdev->tx_ring_shadow_reg_area = NULL;
 	}
 }
@@ -2654,8 +2655,8 @@ static void ql_free_shadow_space(struct ql_adapter *qdev)
 static int ql_alloc_shadow_space(struct ql_adapter *qdev)
 {
 	qdev->rx_ring_shadow_reg_area =
-		pci_zalloc_consistent(qdev->pdev, PAGE_SIZE,
-				      &qdev->rx_ring_shadow_reg_dma);
+		dma_alloc_coherent(&qdev->pdev->dev, PAGE_SIZE,
+				   &qdev->rx_ring_shadow_reg_dma, GFP_ATOMIC);
 	if (!qdev->rx_ring_shadow_reg_area) {
 		netif_err(qdev, ifup, qdev->ndev,
 			  "Allocation of RX shadow space failed.\n");
@@ -2663,8 +2664,8 @@ static int ql_alloc_shadow_space(struct ql_adapter *qdev)
 	}
 
 	qdev->tx_ring_shadow_reg_area =
-		pci_zalloc_consistent(qdev->pdev, PAGE_SIZE,
-				      &qdev->tx_ring_shadow_reg_dma);
+		dma_alloc_coherent(&qdev->pdev->dev, PAGE_SIZE,
+				   &qdev->tx_ring_shadow_reg_dma, GFP_ATOMIC);
 	if (!qdev->tx_ring_shadow_reg_area) {
 		netif_err(qdev, ifup, qdev->ndev,
 			  "Allocation of TX shadow space failed.\n");
@@ -2673,10 +2674,10 @@ static int ql_alloc_shadow_space(struct ql_adapter *qdev)
 	return 0;
 
 err_wqp_sh_area:
-	pci_free_consistent(qdev->pdev,
-			    PAGE_SIZE,
-			    qdev->rx_ring_shadow_reg_area,
-			    qdev->rx_ring_shadow_reg_dma);
+	dma_free_coherent(&qdev->pdev->dev,
+			  PAGE_SIZE,
+			  qdev->rx_ring_shadow_reg_area,
+			  qdev->rx_ring_shadow_reg_dma);
 	return -ENOMEM;
 }
 
@@ -2702,8 +2703,8 @@ static void ql_free_tx_resources(struct ql_adapter *qdev,
 				 struct tx_ring *tx_ring)
 {
 	if (tx_ring->wq_base) {
-		pci_free_consistent(qdev->pdev, tx_ring->wq_size,
-				    tx_ring->wq_base, tx_ring->wq_base_dma);
+		dma_free_coherent(&qdev->pdev->dev, tx_ring->wq_size,
+				  tx_ring->wq_base, tx_ring->wq_base_dma);
 		tx_ring->wq_base = NULL;
 	}
 	kfree(tx_ring->q);
@@ -2714,8 +2715,8 @@ static int ql_alloc_tx_resources(struct ql_adapter *qdev,
 				 struct tx_ring *tx_ring)
 {
 	tx_ring->wq_base =
-	    pci_alloc_consistent(qdev->pdev, tx_ring->wq_size,
-				 &tx_ring->wq_base_dma);
+	    dma_alloc_coherent(&qdev->pdev->dev, tx_ring->wq_size,
+			       &tx_ring->wq_base_dma, GFP_ATOMIC);
 
 	if (!tx_ring->wq_base ||
 	    tx_ring->wq_base_dma & WQ_ADDR_ALIGN)
@@ -2729,8 +2730,8 @@ static int ql_alloc_tx_resources(struct ql_adapter *qdev,
 
 	return 0;
 err:
-	pci_free_consistent(qdev->pdev, tx_ring->wq_size,
-			    tx_ring->wq_base, tx_ring->wq_base_dma);
+	dma_free_coherent(&qdev->pdev->dev, tx_ring->wq_size,
+			  tx_ring->wq_base, tx_ring->wq_base_dma);
 	tx_ring->wq_base = NULL;
 pci_alloc_err:
 	netif_err(qdev, ifup, qdev->ndev, "tx_ring alloc failed.\n");
@@ -2748,17 +2749,17 @@ static void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring
 			&lbq->queue[lbq->next_to_clean];
 
 		if (lbq_desc->p.pg_chunk.offset == last_offset)
-			pci_unmap_page(qdev->pdev, lbq_desc->dma_addr,
+			dma_unmap_page(&qdev->pdev->dev, lbq_desc->dma_addr,
 				       ql_lbq_block_size(qdev),
-				       PCI_DMA_FROMDEVICE);
+				       DMA_FROM_DEVICE);
 		put_page(lbq_desc->p.pg_chunk.page);
 
 		lbq->next_to_clean = QLGE_BQ_WRAP(lbq->next_to_clean + 1);
 	}
 
 	if (rx_ring->master_chunk.page) {
-		pci_unmap_page(qdev->pdev, rx_ring->chunk_dma_addr,
-			       ql_lbq_block_size(qdev), PCI_DMA_FROMDEVICE);
+		dma_unmap_page(&qdev->pdev->dev, rx_ring->chunk_dma_addr,
+			       ql_lbq_block_size(qdev), DMA_FROM_DEVICE);
 		put_page(rx_ring->master_chunk.page);
 		rx_ring->master_chunk.page = NULL;
 	}
@@ -2777,9 +2778,9 @@ static void ql_free_sbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring
 			return;
 		}
 		if (sbq_desc->p.skb) {
-			pci_unmap_single(qdev->pdev, sbq_desc->dma_addr,
+			dma_unmap_single(&qdev->pdev->dev, sbq_desc->dma_addr,
 					 SMALL_BUF_MAP_SIZE,
-					 PCI_DMA_FROMDEVICE);
+					 DMA_FROM_DEVICE);
 			dev_kfree_skb(sbq_desc->p.skb);
 			sbq_desc->p.skb = NULL;
 		}
@@ -2820,8 +2821,8 @@ static int qlge_init_bq(struct qlge_bq *bq)
 	__le64 *buf_ptr;
 	int i;
 
-	bq->base = pci_alloc_consistent(qdev->pdev, QLGE_BQ_SIZE,
-					&bq->base_dma);
+	bq->base = dma_alloc_coherent(&qdev->pdev->dev, QLGE_BQ_SIZE,
+				      &bq->base_dma, GFP_ATOMIC);
 	if (!bq->base) {
 		netif_err(qdev, ifup, qdev->ndev,
 			  "ring %u %s allocation failed.\n", rx_ring->cq_id,
@@ -2850,8 +2851,8 @@ static void ql_free_rx_resources(struct ql_adapter *qdev,
 {
 	/* Free the small buffer queue. */
 	if (rx_ring->sbq.base) {
-		pci_free_consistent(qdev->pdev, QLGE_BQ_SIZE,
-				    rx_ring->sbq.base, rx_ring->sbq.base_dma);
+		dma_free_coherent(&qdev->pdev->dev, QLGE_BQ_SIZE,
+				  rx_ring->sbq.base, rx_ring->sbq.base_dma);
 		rx_ring->sbq.base = NULL;
 	}
 
@@ -2861,8 +2862,8 @@ static void ql_free_rx_resources(struct ql_adapter *qdev,
 
 	/* Free the large buffer queue. */
 	if (rx_ring->lbq.base) {
-		pci_free_consistent(qdev->pdev, QLGE_BQ_SIZE,
-				    rx_ring->lbq.base, rx_ring->lbq.base_dma);
+		dma_free_coherent(&qdev->pdev->dev, QLGE_BQ_SIZE,
+				  rx_ring->lbq.base, rx_ring->lbq.base_dma);
 		rx_ring->lbq.base = NULL;
 	}
 
@@ -2872,9 +2873,9 @@ static void ql_free_rx_resources(struct ql_adapter *qdev,
 
 	/* Free the rx queue. */
 	if (rx_ring->cq_base) {
-		pci_free_consistent(qdev->pdev,
-				    rx_ring->cq_size,
-				    rx_ring->cq_base, rx_ring->cq_base_dma);
+		dma_free_coherent(&qdev->pdev->dev,
+				  rx_ring->cq_size,
+				  rx_ring->cq_base, rx_ring->cq_base_dma);
 		rx_ring->cq_base = NULL;
 	}
 }
@@ -2890,8 +2891,8 @@ static int ql_alloc_rx_resources(struct ql_adapter *qdev,
 	 * Allocate the completion queue for this rx_ring.
 	 */
 	rx_ring->cq_base =
-	    pci_alloc_consistent(qdev->pdev, rx_ring->cq_size,
-				 &rx_ring->cq_base_dma);
+	    dma_alloc_coherent(&qdev->pdev->dev, rx_ring->cq_size,
+			       &rx_ring->cq_base_dma, GFP_ATOMIC);
 
 	if (!rx_ring->cq_base) {
 		netif_err(qdev, ifup, qdev->ndev, "rx_ring alloc failed.\n");
@@ -4125,11 +4126,11 @@ static struct net_device_stats *qlge_get_stats(struct net_device
 	/* Get RX stats. */
 	pkts = mcast = dropped = errors = bytes = 0;
 	for (i = 0; i < qdev->rss_ring_count; i++, rx_ring++) {
-			pkts += rx_ring->rx_packets;
-			bytes += rx_ring->rx_bytes;
-			dropped += rx_ring->rx_dropped;
-			errors += rx_ring->rx_errors;
-			mcast += rx_ring->rx_multicast;
+		pkts += rx_ring->rx_packets;
+		bytes += rx_ring->rx_bytes;
+		dropped += rx_ring->rx_dropped;
+		errors += rx_ring->rx_errors;
+		mcast += rx_ring->rx_multicast;
 	}
 	ndev->stats.rx_packets = pkts;
 	ndev->stats.rx_bytes = bytes;
@@ -4140,9 +4141,9 @@ static struct net_device_stats *qlge_get_stats(struct net_device
 	/* Get TX stats. */
 	pkts = errors = bytes = 0;
 	for (i = 0; i < qdev->tx_ring_count; i++, tx_ring++) {
-			pkts += tx_ring->tx_packets;
-			bytes += tx_ring->tx_bytes;
-			errors += tx_ring->tx_errors;
+		pkts += tx_ring->tx_packets;
+		bytes += tx_ring->tx_bytes;
+		errors += tx_ring->tx_errors;
 	}
 	ndev->stats.tx_packets = pkts;
 	ndev->stats.tx_bytes = bytes;
@@ -4430,13 +4431,13 @@ static int ql_init_device(struct pci_dev *pdev, struct net_device *ndev,
 	}
 
 	pci_set_master(pdev);
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
 		set_bit(QL_DMA64, &qdev->flags);
-		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+		err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 	} else {
-		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (!err)
-		       err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		       err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	}
 
 	if (err) {
diff --git a/drivers/staging/rtl8188eu/core/rtw_ap.c b/drivers/staging/rtl8188eu/core/rtw_ap.c
index 93283c7deec4..817793b9aff2 100644
--- a/drivers/staging/rtl8188eu/core/rtw_ap.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ap.c
@@ -264,8 +264,10 @@ void expire_timeout_chk(struct adapter *padapter)
 			list_del_init(&psta->asoc_list);
 			pstapriv->asoc_list_cnt--;
 
-			DBG_88E("asoc expire %pM, state = 0x%x\n", (psta->hwaddr), psta->state);
-			updated = ap_free_sta(padapter, psta, true, WLAN_REASON_DEAUTH_LEAVING);
+			DBG_88E("asoc expire %pM, state = 0x%x\n",
+				(psta->hwaddr), psta->state);
+			updated = ap_free_sta(padapter, psta, true,
+					      WLAN_REASON_DEAUTH_LEAVING);
 		} else {
 			/* TODO: Aging mechanism to digest frames in sleep_q to avoid running out of xmitframe */
 			if (psta->sleepq_len > (NR_XMITFRAME / pstapriv->asoc_list_cnt) &&
@@ -294,16 +296,21 @@ void expire_timeout_chk(struct adapter *padapter)
 		for (i = 0; i < chk_alive_num; i++) {
 			int ret = _FAIL;
 
-			psta = rtw_get_stainfo_by_offset(pstapriv, chk_alive_list[i]);
+			psta = rtw_get_stainfo_by_offset(pstapriv,
+							 chk_alive_list[i]);
 
-			if (psta->state & WIFI_SLEEP_STATE)
-				ret = issue_nulldata(padapter, psta->hwaddr, 0, 1, 50);
-			else
-				ret = issue_nulldata(padapter, psta->hwaddr, 0, 3, 50);
+			if (psta->state & WIFI_SLEEP_STATE) {
+				ret = issue_nulldata(padapter, psta->hwaddr,
+						     0, 1, 50);
+			} else {
+				ret = issue_nulldata(padapter, psta->hwaddr,
+						     0, 3, 50);
+			}
 
 			psta->keep_alive_trycnt++;
 			if (ret == _SUCCESS) {
-				DBG_88E("asoc check, sta(%pM) is alive\n", (psta->hwaddr));
+				DBG_88E("asoc check, sta(%pM) is alive\n",
+					(psta->hwaddr));
 				psta->expire_to = pstapriv->expire_to;
 				psta->keep_alive_trycnt = 0;
 				continue;
@@ -315,11 +322,13 @@ void expire_timeout_chk(struct adapter *padapter)
 
 			psta->keep_alive_trycnt = 0;
 
-			DBG_88E("asoc expire %pM, state = 0x%x\n", (psta->hwaddr), psta->state);
+			DBG_88E("asoc expire %pM, state = 0x%x\n",
+				psta->hwaddr, psta->state);
 			spin_lock_bh(&pstapriv->asoc_list_lock);
 			list_del_init(&psta->asoc_list);
 			pstapriv->asoc_list_cnt--;
-			updated = ap_free_sta(padapter, psta, true, WLAN_REASON_DEAUTH_LEAVING);
+			updated = ap_free_sta(padapter, psta, true,
+					      WLAN_REASON_DEAUTH_LEAVING);
 			spin_unlock_bh(&pstapriv->asoc_list_lock);
 		}
 
@@ -431,7 +440,8 @@ static void update_bmc_sta(struct adapter *padapter)
 		supportRateNum = rtw_get_rateset_len((u8 *)&pcur_network->SupportedRates);
 		network_type = rtw_check_network_type((u8 *)&pcur_network->SupportedRates);
 
-		memcpy(psta->bssrateset, &pcur_network->SupportedRates, supportRateNum);
+		memcpy(psta->bssrateset, &pcur_network->SupportedRates,
+		       supportRateNum);
 		psta->bssratelen = supportRateNum;
 
 		/* b/g mode ra_bitmap */
@@ -445,7 +455,8 @@ static void update_bmc_sta(struct adapter *padapter)
 		tx_ra_bitmap = 0xf;
 
 		raid = networktype_to_raid(network_type);
-		init_rate = get_highest_rate_idx(tx_ra_bitmap & 0x0fffffff) & 0x3f;
+		init_rate = get_highest_rate_idx(tx_ra_bitmap & 0x0fffffff) &
+			    0x3f;
 
 		/* ap mode */
 		rtw_hal_set_odm_var(padapter, HAL_ODM_STA_INFO, psta, true);
@@ -456,7 +467,8 @@ static void update_bmc_sta(struct adapter *padapter)
 			arg = psta->mac_id & 0x1f;
 			arg |= BIT(7);
 			tx_ra_bitmap |= ((raid << 28) & 0xf0000000);
-			DBG_88E("%s, mask = 0x%x, arg = 0x%x\n", __func__, tx_ra_bitmap, arg);
+			DBG_88E("%s, mask = 0x%x, arg = 0x%x\n", __func__,
+				tx_ra_bitmap, arg);
 
 			/* bitmap[0:27] = tx_rate_bitmap */
 			/* bitmap[28:31]= Rate Adaptive id */
@@ -647,7 +659,8 @@ static void start_bss_network(struct adapter *padapter, u8 *pbuf)
 	rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
 
 	/* Beacon Control related register */
-	rtw_hal_set_hwreg(padapter, HW_VAR_BEACON_INTERVAL, (u8 *)(&bcn_interval));
+	rtw_hal_set_hwreg(padapter, HW_VAR_BEACON_INTERVAL,
+			  (u8 *)(&bcn_interval));
 
 	UpdateBrateTbl(padapter, pnetwork->SupportedRates);
 	rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, pnetwork->SupportedRates);
@@ -657,7 +670,10 @@ static void start_bss_network(struct adapter *padapter, u8 *pbuf)
 		Switch_DM_Func(padapter, DYNAMIC_ALL_FUNC_ENABLE, true);
 	}
 	/* set channel, bwmode */
-	p = rtw_get_ie((pnetwork->ies + sizeof(struct ndis_802_11_fixed_ie)), _HT_ADD_INFO_IE_, &ie_len, (pnetwork->ie_length - sizeof(struct ndis_802_11_fixed_ie)));
+	p = rtw_get_ie(pnetwork->ies + sizeof(struct ndis_802_11_fixed_ie),
+		       _HT_ADD_INFO_IE_, &ie_len,
+		       pnetwork->ie_length -
+		       sizeof(struct ndis_802_11_fixed_ie));
 	if (p && ie_len) {
 		pht_info = (struct HT_info_element *)(p + 2);
 
@@ -682,7 +698,8 @@ static void start_bss_network(struct adapter *padapter, u8 *pbuf)
 	 */
 	set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
 
-	DBG_88E("CH =%d, BW =%d, offset =%d\n", cur_channel, cur_bwmode, cur_ch_offset);
+	DBG_88E("CH =%d, BW =%d, offset =%d\n", cur_channel, cur_bwmode,
+		cur_ch_offset);
 
 	/*  */
 	pmlmeext->cur_channel = cur_channel;
@@ -771,17 +788,19 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf,  int len)
 	cap = get_unaligned_le16(ie);
 
 	/* SSID */
-	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SSID_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
+	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SSID_IE_, &ie_len,
+		       pbss_network->ie_length - _BEACON_IE_OFFSET_);
 	if (p && ie_len > 0) {
 		memset(&pbss_network->ssid, 0, sizeof(struct ndis_802_11_ssid));
-		memcpy(pbss_network->ssid.ssid, (p + 2), ie_len);
+		memcpy(pbss_network->ssid.ssid, p + 2, ie_len);
 		pbss_network->ssid.ssid_length = ie_len;
 	}
 
 	/* channel */
 	channel = 0;
 	pbss_network->Configuration.Length = 0;
-	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _DSSET_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
+	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _DSSET_IE_, &ie_len,
+		       (pbss_network->ie_length - _BEACON_IE_OFFSET_));
 	if (p && ie_len > 0)
 		channel = *(p + 2);
 
@@ -789,14 +808,16 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf,  int len)
 
 	memset(supportRate, 0, NDIS_802_11_LENGTH_RATES_EX);
 	/*  get supported rates */
-	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SUPPORTEDRATES_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
+	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SUPPORTEDRATES_IE_, &ie_len,
+		       pbss_network->ie_length - _BEACON_IE_OFFSET_);
 	if (p) {
 		memcpy(supportRate, p + 2, ie_len);
 		supportRateNum = ie_len;
 	}
 
 	/* get ext_supported rates */
-	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _EXT_SUPPORTEDRATES_IE_, &ie_len, pbss_network->ie_length - _BEACON_IE_OFFSET_);
+	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _EXT_SUPPORTEDRATES_IE_,
+		       &ie_len, pbss_network->ie_length - _BEACON_IE_OFFSET_);
 	if (p) {
 		memcpy(supportRate + supportRateNum, p + 2, ie_len);
 		supportRateNum += ie_len;
@@ -807,7 +828,8 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf,  int len)
 	rtw_set_supported_rate(pbss_network->SupportedRates, network_type);
 
 	/* parsing ERP_IE */
-	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _ERPINFO_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
+	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _ERPINFO_IE_, &ie_len,
+		       pbss_network->ie_length - _BEACON_IE_OFFSET_);
 	if (p && ie_len > 0)
 		ERP_IE_handler(padapter, (struct ndis_802_11_var_ie *)p);
 
@@ -824,7 +846,8 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf,  int len)
 	pairwise_cipher = 0;
 	psecuritypriv->wpa2_group_cipher = _NO_PRIVACY_;
 	psecuritypriv->wpa2_pairwise_cipher = _NO_PRIVACY_;
-	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _RSN_IE_2_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
+	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _RSN_IE_2_, &ie_len,
+		       pbss_network->ie_length - _BEACON_IE_OFFSET_);
 	if (p && ie_len > 0) {
 		if (rtw_parse_wpa2_ie(p, ie_len + 2, &group_cipher, &pairwise_cipher, NULL) == _SUCCESS) {
 			psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_8021X;
@@ -844,7 +867,7 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf,  int len)
 	psecuritypriv->wpa_pairwise_cipher = _NO_PRIVACY_;
 	for (p = ie + _BEACON_IE_OFFSET_;; p += (ie_len + 2)) {
 		p = rtw_get_ie(p, _SSN_IE_1_, &ie_len,
-			       (pbss_network->ie_length - _BEACON_IE_OFFSET_ - (ie_len + 2)));
+			       pbss_network->ie_length - _BEACON_IE_OFFSET_ - (ie_len + 2));
 		if ((p) && (!memcmp(p + 2, OUI1, 4))) {
 			if (rtw_parse_wpa_ie(p, ie_len + 2, &group_cipher,
 					     &pairwise_cipher, NULL) == _SUCCESS) {
@@ -869,7 +892,7 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf,  int len)
 	if (pregistrypriv->wmm_enable) {
 		for (p = ie + _BEACON_IE_OFFSET_;; p += (ie_len + 2)) {
 			p = rtw_get_ie(p, _VENDOR_SPECIFIC_IE_, &ie_len,
-				       (pbss_network->ie_length - _BEACON_IE_OFFSET_ - (ie_len + 2)));
+				       pbss_network->ie_length - _BEACON_IE_OFFSET_ - (ie_len + 2));
 			if ((p) && !memcmp(p + 2, WMM_PARA_IE, 6)) {
 				pmlmepriv->qospriv.qos_option = 1;
 
@@ -892,7 +915,7 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf,  int len)
 	}
 	/* parsing HT_CAP_IE */
 	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_CAPABILITY_IE_, &ie_len,
-		       (pbss_network->ie_length - _BEACON_IE_OFFSET_));
+		       pbss_network->ie_length - _BEACON_IE_OFFSET_);
 	if (p && ie_len > 0) {
 		struct ieee80211_ht_cap *pht_cap = (struct ieee80211_ht_cap *)(p + 2);
 
@@ -916,7 +939,7 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf,  int len)
 
 	/* parsing HT_INFO_IE */
 	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_ADD_INFO_IE_, &ie_len,
-		       (pbss_network->ie_length - _BEACON_IE_OFFSET_));
+		       pbss_network->ie_length - _BEACON_IE_OFFSET_);
 	if (p && ie_len > 0)
 		pHT_info_ie = p;
 	switch (network_type) {
@@ -1226,17 +1249,17 @@ void update_beacon(struct adapter *padapter, u8 ie_id, u8 *oui, u8 tx)
 }
 
 /*
-op_mode
-Set to 0 (HT pure) under the following conditions
-	- all STAs in the BSS are 20/40 MHz HT in 20/40 MHz BSS or
-	- all STAs in the BSS are 20 MHz HT in 20 MHz BSS
-Set to 1 (HT non-member protection) if there may be non-HT STAs
-	in both the primary and the secondary channel
-Set to 2 if only HT STAs are associated in BSS,
-	however and at least one 20 MHz HT STA is associated
-Set to 3 (HT mixed mode) when one or more non-HT STAs are associated
-	(currently non-GF HT station is considered as non-HT STA also)
-*/
+ * op_mode
+ * Set to 0 (HT pure) under the following conditions
+ *	- all STAs in the BSS are 20/40 MHz HT in 20/40 MHz BSS or
+ *	- all STAs in the BSS are 20 MHz HT in 20 MHz BSS
+ * Set to 1 (HT non-member protection) if there may be non-HT STAs
+ *	  in both the primary and the secondary channel
+ * Set to 2 if only HT STAs are associated in BSS,
+ *	  however and at least one 20 MHz HT STA is associated
+ * Set to 3 (HT mixed mode) when one or more non-HT STAs are associated
+ *	  (currently non-GF HT station is considered as non-HT STA also)
+ */
 static int rtw_ht_operation_update(struct adapter *padapter)
 {
 	u16 cur_op_mode, new_op_mode;
diff --git a/drivers/staging/rtl8188eu/core/rtw_efuse.c b/drivers/staging/rtl8188eu/core/rtw_efuse.c
index c525682d0edf..9bb3ec0cd62f 100644
--- a/drivers/staging/rtl8188eu/core/rtw_efuse.c
+++ b/drivers/staging/rtl8188eu/core/rtw_efuse.c
@@ -370,28 +370,27 @@ static u16 Efuse_GetCurrentSize(struct adapter *pAdapter)
 
 	while (efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data) &&
 	       AVAILABLE_EFUSE_ADDR(efuse_addr)) {
-		if (efuse_data != 0xFF) {
-			if ((efuse_data & 0x1F) == 0x0F) {		/* extended header */
-				hoffset = efuse_data;
+		if (efuse_data == 0xFF)
+			break;
+		if ((efuse_data & 0x1F) == 0x0F) { /* extended header */
+			hoffset = efuse_data;
+			efuse_addr++;
+			efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data);
+			if ((efuse_data & 0x0F) == 0x0F) {
 				efuse_addr++;
-				efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data);
-				if ((efuse_data & 0x0F) == 0x0F) {
-					efuse_addr++;
-					continue;
-				} else {
-					hoffset = ((hoffset & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1);
-					hworden = efuse_data & 0x0F;
-				}
+				continue;
 			} else {
-				hoffset = (efuse_data >> 4) & 0x0F;
-				hworden =  efuse_data & 0x0F;
+				hoffset = ((hoffset & 0xE0) >> 5) |
+					  ((efuse_data & 0xF0) >> 1);
+				hworden = efuse_data & 0x0F;
 			}
-			word_cnts = Efuse_CalculateWordCnts(hworden);
-			/* read next header */
-			efuse_addr = efuse_addr + (word_cnts * 2) + 1;
 		} else {
-			break;
+			hoffset = (efuse_data >> 4) & 0x0F;
+			hworden =  efuse_data & 0x0F;
 		}
+		word_cnts = Efuse_CalculateWordCnts(hworden);
+		/* read next header */
+		efuse_addr = efuse_addr + (word_cnts * 2) + 1;
 	}
 
 	rtw_hal_set_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_addr);
diff --git a/drivers/staging/rtl8188eu/core/rtw_ieee80211.c b/drivers/staging/rtl8188eu/core/rtw_ieee80211.c
index e186982d5908..caf600eba03b 100644
--- a/drivers/staging/rtl8188eu/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ieee80211.c
@@ -253,11 +253,11 @@ int rtw_generate_ie(struct registry_priv *pregistrypriv)
 	}
 
 	/* DS parameter set */
-	ie = rtw_set_ie(ie, _DSSET_IE_, 1, (u8 *)&(pdev_network->Configuration.DSConfig), &sz);
+	ie = rtw_set_ie(ie, _DSSET_IE_, 1, (u8 *)&pdev_network->Configuration.DSConfig, &sz);
 
 	/* IBSS Parameter Set */
 
-	ie = rtw_set_ie(ie, _IBSS_PARA_IE_, 2, (u8 *)&(pdev_network->Configuration.ATIMWindow), &sz);
+	ie = rtw_set_ie(ie, _IBSS_PARA_IE_, 2, (u8 *)&pdev_network->Configuration.ATIMWindow, &sz);
 
 	if (rateLen > 8)
 		ie = rtw_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8), (pdev_network->SupportedRates + 8), &sz);
diff --git a/drivers/staging/rtl8188eu/core/rtw_led.c b/drivers/staging/rtl8188eu/core/rtw_led.c
index d1406cc99768..32dccae186ca 100644
--- a/drivers/staging/rtl8188eu/core/rtw_led.c
+++ b/drivers/staging/rtl8188eu/core/rtw_led.c
@@ -90,7 +90,6 @@ static void SwLedBlink1(struct LED_871x *pLed)
 {
 	struct adapter *padapter = pLed->padapter;
 	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
-	u8 bStopBlinking = false;
 
 	/*  Change LED according to BlinkingLedState specified. */
 	if (pLed->BlinkingLedState == RTW_LED_ON) {
@@ -128,9 +127,7 @@ static void SwLedBlink1(struct LED_871x *pLed)
 		break;
 	case LED_BLINK_SCAN:
 		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		if (bStopBlinking) {
+		if (pLed->BlinkTimes == 0) {
 			if (check_fwstate(pmlmepriv, _FW_LINKED)) {
 				pLed->bLedLinkBlinkInProgress = true;
 				pLed->CurrLedState = LED_BLINK_NORMAL;
@@ -164,9 +161,7 @@ static void SwLedBlink1(struct LED_871x *pLed)
 		break;
 	case LED_BLINK_TXRX:
 		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		if (bStopBlinking) {
+		if (pLed->BlinkTimes == 0) {
 			if (check_fwstate(pmlmepriv, _FW_LINKED)) {
 				pLed->bLedLinkBlinkInProgress = true;
 				pLed->CurrLedState = LED_BLINK_NORMAL;
@@ -188,7 +183,6 @@ static void SwLedBlink1(struct LED_871x *pLed)
 					  msecs_to_jiffies(LED_BLINK_NO_LINK_INTERVAL_ALPHA));
 				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
 			}
-			pLed->BlinkTimes = 0;
 			pLed->bLedBlinkInProgress = false;
 		} else {
 			if (pLed->bLedOn)
@@ -208,12 +202,7 @@ static void SwLedBlink1(struct LED_871x *pLed)
 			  msecs_to_jiffies(LED_BLINK_SCAN_INTERVAL_ALPHA));
 		break;
 	case LED_BLINK_WPS_STOP:	/* WPS success */
-		if (pLed->BlinkingLedState == RTW_LED_ON)
-			bStopBlinking = false;
-		else
-			bStopBlinking = true;
-
-		if (bStopBlinking) {
+		if (pLed->BlinkingLedState != RTW_LED_ON) {
 			pLed->bLedLinkBlinkInProgress = true;
 			pLed->CurrLedState = LED_BLINK_NORMAL;
 			if (pLed->bLedOn)
diff --git a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
index 04897cd48370..8d035f67ef61 100644
--- a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
@@ -1781,7 +1781,7 @@ static void issue_action_BSSCoexistPacket(struct adapter *padapter)
 
 			p = rtw_get_ie(pbss_network->ies + _FIXED_IE_LENGTH_, _HT_CAPABILITY_IE_, &len, pbss_network->ie_length - _FIXED_IE_LENGTH_);
 			if (!p || len == 0) { /* non-HT */
-				if ((pbss_network->Configuration.DSConfig <= 0) || (pbss_network->Configuration.DSConfig > 14))
+				if (pbss_network->Configuration.DSConfig <= 0)
 					continue;
 
 				ICS[0][pbss_network->Configuration.DSConfig] = 1;
@@ -1932,11 +1932,11 @@ static void site_survey(struct adapter *padapter)
 				if (pmlmeext->sitesurvey_res.ssid[i].ssid_length) {
 					/* todo: to issue two probe req??? */
 					issue_probereq(padapter,
-					&(pmlmeext->sitesurvey_res.ssid[i]),
+					&pmlmeext->sitesurvey_res.ssid[i],
 								NULL, false);
 					/* msleep(SURVEY_TO>>1); */
 					issue_probereq(padapter,
-					&(pmlmeext->sitesurvey_res.ssid[i]),
+					&pmlmeext->sitesurvey_res.ssid[i],
 								NULL, false);
 				}
 			}
diff --git a/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c b/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
index c4f58507dbfd..c000382c96d9 100644
--- a/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
+++ b/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
@@ -173,7 +173,7 @@ int ips_leave(struct adapter *padapter)
 
 		DBG_88E_LEVEL(_drv_info_, "nolinked power save leave\n");
 
-		if ((_WEP40_ == psecuritypriv->dot11PrivacyAlgrthm) || (_WEP104_ == psecuritypriv->dot11PrivacyAlgrthm)) {
+		if ((psecuritypriv->dot11PrivacyAlgrthm == _WEP40_) || (psecuritypriv->dot11PrivacyAlgrthm == _WEP104_)) {
 			DBG_88E("==>%s, channel(%d), processing(%x)\n", __func__, padapter->mlmeextpriv.cur_channel, pwrpriv->bips_processing);
 			set_channel_bwmode(padapter, padapter->mlmeextpriv.cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
 			for (keyid = 0; keyid < 4; keyid++) {
diff --git a/drivers/staging/rtl8188eu/core/rtw_recv.c b/drivers/staging/rtl8188eu/core/rtw_recv.c
index d4278361e002..a036ef104198 100644
--- a/drivers/staging/rtl8188eu/core/rtw_recv.c
+++ b/drivers/staging/rtl8188eu/core/rtw_recv.c
@@ -1525,21 +1525,14 @@ static int amsdu_to_msdu(struct adapter *padapter, struct recv_frame *prframe)
 
 		/* Allocate new skb for releasing to upper layer */
 		sub_skb = dev_alloc_skb(nSubframe_Length + 12);
-		if (sub_skb) {
-			skb_reserve(sub_skb, 12);
-			skb_put_data(sub_skb, pdata, nSubframe_Length);
-		} else {
-			sub_skb = skb_clone(prframe->pkt, GFP_ATOMIC);
-			if (sub_skb) {
-				sub_skb->data = pdata;
-				sub_skb->len = nSubframe_Length;
-				skb_set_tail_pointer(sub_skb, nSubframe_Length);
-			} else {
-				DBG_88E("skb_clone() Fail!!! , nr_subframes=%d\n", nr_subframes);
-				break;
-			}
+		if (!sub_skb) {
+			DBG_88E("dev_alloc_skb() Fail!!! , nr_subframes=%d\n", nr_subframes);
+			break;
 		}
 
+		skb_reserve(sub_skb, 12);
+		skb_put_data(sub_skb, pdata, nSubframe_Length);
+
 		subframes[nr_subframes++] = sub_skb;
 
 		if (nr_subframes >= MAX_SUBFRAME_COUNT) {
diff --git a/drivers/staging/rtl8188eu/hal/fw.c b/drivers/staging/rtl8188eu/hal/fw.c
index 486ee4bd4744..3d1d29e9f8e0 100644
--- a/drivers/staging/rtl8188eu/hal/fw.c
+++ b/drivers/staging/rtl8188eu/hal/fw.c
@@ -111,7 +111,7 @@ static int _rtl88e_fw_free_to_go(struct adapter *adapt)
 
 	do {
 		value32 = usb_read32(adapt, REG_MCUFWDL);
-		if (value32 & FWDL_ChkSum_rpt)
+		if (value32 & FWDL_CHKSUM_RPT)
 			break;
 	} while (counter++ < POLLING_READY_TIMEOUT_COUNT);
 
@@ -146,7 +146,7 @@ int rtl88eu_download_fw(struct adapter *adapt)
 	struct dvobj_priv *dvobj = adapter_to_dvobj(adapt);
 	struct device *device = dvobj_to_dev(dvobj);
 	const struct firmware *fw;
-	const char fw_name[] = "rtlwifi/rtl8188eufw.bin";
+	static const char fw_name[] = "rtlwifi/rtl8188eufw.bin";
 	struct rtl92c_firmware_header *pfwheader = NULL;
 	u8 *download_data, *fw_data;
 	size_t download_size;
@@ -192,7 +192,8 @@ int rtl88eu_download_fw(struct adapter *adapt)
 		rtl88e_firmware_selfreset(adapt);
 	}
 	_rtl88e_enable_fw_download(adapt, true);
-	usb_write8(adapt, REG_MCUFWDL, usb_read8(adapt, REG_MCUFWDL) | FWDL_ChkSum_rpt);
+	usb_write8(adapt, REG_MCUFWDL,
+		   usb_read8(adapt, REG_MCUFWDL) | FWDL_CHKSUM_RPT);
 	_rtl88e_write_fw(adapt, download_data, download_size);
 	_rtl88e_enable_fw_download(adapt, false);
 
diff --git a/drivers/staging/rtl8188eu/hal/odm.c b/drivers/staging/rtl8188eu/hal/odm.c
index 698377ea60ee..28974808839d 100644
--- a/drivers/staging/rtl8188eu/hal/odm.c
+++ b/drivers/staging/rtl8188eu/hal/odm.c
@@ -5,8 +5,6 @@
  *
  ******************************************************************************/
 
-/*  include files */
-
 #include "odm_precomp.h"
 #include "phy.h"
 
@@ -193,7 +191,7 @@ void ODM_DMWatchdog(struct odm_dm_struct *pDM_Odm)
 	odm_DIG(pDM_Odm);
 	odm_CCKPacketDetectionThresh(pDM_Odm);
 
-	if (*(pDM_Odm->pbPowerSaving))
+	if (*pDM_Odm->pbPowerSaving)
 		return;
 
 	odm_RefreshRateAdaptiveMask(pDM_Odm);
@@ -229,13 +227,13 @@ void odm_CommonInfoSelfUpdate(struct odm_dm_struct *pDM_Odm)
 	u8 i;
 	struct sta_info *pEntry;
 
-	if (*(pDM_Odm->pBandWidth) == ODM_BW40M) {
-		if (*(pDM_Odm->pSecChOffset) == 1)
-			pDM_Odm->ControlChannel = *(pDM_Odm->pChannel) - 2;
-		else if (*(pDM_Odm->pSecChOffset) == 2)
-			pDM_Odm->ControlChannel = *(pDM_Odm->pChannel) + 2;
+	if (*pDM_Odm->pBandWidth == ODM_BW40M) {
+		if (*pDM_Odm->pSecChOffset == 1)
+			pDM_Odm->ControlChannel = *pDM_Odm->pChannel - 2;
+		else if (*pDM_Odm->pSecChOffset == 2)
+			pDM_Odm->ControlChannel = *pDM_Odm->pChannel + 2;
 	} else {
-		pDM_Odm->ControlChannel = *(pDM_Odm->pChannel);
+		pDM_Odm->ControlChannel = *pDM_Odm->pChannel;
 	}
 
 	for (i = 0; i < ODM_ASSOCIATE_ENTRY_NUM; i++) {
@@ -270,16 +268,16 @@ void odm_CmnInfoInit_Debug(struct odm_dm_struct *pDM_Odm)
 void odm_CmnInfoHook_Debug(struct odm_dm_struct *pDM_Odm)
 {
 	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("odm_CmnInfoHook_Debug==>\n"));
-	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pNumTxBytesUnicast=%llu\n", *(pDM_Odm->pNumTxBytesUnicast)));
-	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pNumRxBytesUnicast=%llu\n", *(pDM_Odm->pNumRxBytesUnicast)));
-	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pWirelessMode=0x%x\n", *(pDM_Odm->pWirelessMode)));
-	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pSecChOffset=%d\n", *(pDM_Odm->pSecChOffset)));
-	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pSecurity=%d\n", *(pDM_Odm->pSecurity)));
-	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pBandWidth=%d\n", *(pDM_Odm->pBandWidth)));
-	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pChannel=%d\n", *(pDM_Odm->pChannel)));
-
-	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pbScanInProcess=%d\n", *(pDM_Odm->pbScanInProcess)));
-	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pbPowerSaving=%d\n", *(pDM_Odm->pbPowerSaving)));
+	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pNumTxBytesUnicast=%llu\n", *pDM_Odm->pNumTxBytesUnicast));
+	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pNumRxBytesUnicast=%llu\n", *pDM_Odm->pNumRxBytesUnicast));
+	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pWirelessMode=0x%x\n", *pDM_Odm->pWirelessMode));
+	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pSecChOffset=%d\n", *pDM_Odm->pSecChOffset));
+	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pSecurity=%d\n", *pDM_Odm->pSecurity));
+	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pBandWidth=%d\n", *pDM_Odm->pBandWidth));
+	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pChannel=%d\n", *pDM_Odm->pChannel));
+
+	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pbScanInProcess=%d\n", *pDM_Odm->pbScanInProcess));
+	ODM_RT_TRACE(pDM_Odm, ODM_COMP_COMMON, ODM_DBG_LOUD, ("pbPowerSaving=%d\n", *pDM_Odm->pbPowerSaving));
 }
 
 void odm_CmnInfoUpdate_Debug(struct odm_dm_struct *pDM_Odm)
@@ -348,7 +346,7 @@ void odm_DIG(struct odm_dm_struct *pDM_Odm)
 		return;
 	}
 
-	if (*(pDM_Odm->pbScanInProcess)) {
+	if (*pDM_Odm->pbScanInProcess) {
 		ODM_RT_TRACE(pDM_Odm, ODM_COMP_DIG, ODM_DBG_LOUD, ("odm_DIG() Return: In Scan Progress\n"));
 		return;
 	}
@@ -508,7 +506,7 @@ void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm)
 {
 	struct adapter *adapter = pDM_Odm->Adapter;
 	u32 ret_value;
-	struct false_alarm_stats *FalseAlmCnt = &(pDM_Odm->FalseAlmCnt);
+	struct false_alarm_stats *FalseAlmCnt = &pDM_Odm->FalseAlmCnt;
 
 	if (!(pDM_Odm->SupportAbility & ODM_BB_FA_CNT))
 		return;
@@ -581,7 +579,7 @@ void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm)
 void odm_CCKPacketDetectionThresh(struct odm_dm_struct *pDM_Odm)
 {
 	u8 CurCCK_CCAThres;
-	struct false_alarm_stats *FalseAlmCnt = &(pDM_Odm->FalseAlmCnt);
+	struct false_alarm_stats *FalseAlmCnt = &pDM_Odm->FalseAlmCnt;
 
 	if (!(pDM_Odm->SupportAbility & (ODM_BB_CCK_PD | ODM_BB_FA_CNT)))
 		return;
@@ -739,7 +737,7 @@ u32 ODM_Get_Rate_Bitmap(struct odm_dm_struct *pDM_Odm, u32 macid, u32 ra_mask, u
 		} else if (rssi_level == DM_RATR_STA_MIDDLE) {
 			rate_bitmap = 0x000ff000;
 		} else {
-			if (*(pDM_Odm->pBandWidth) == ODM_BW40M)
+			if (*pDM_Odm->pBandWidth == ODM_BW40M)
 				rate_bitmap = 0x000ff015;
 			else
 				rate_bitmap = 0x000ff005;
@@ -945,7 +943,7 @@ void odm_TXPowerTrackingInit(struct odm_dm_struct *pDM_Odm)
 {
 	pDM_Odm->RFCalibrateInfo.bTXPowerTracking = true;
 	pDM_Odm->RFCalibrateInfo.TXPowercount = 0;
-	if (*(pDM_Odm->mp_mode) != 1)
+	if (*pDM_Odm->mp_mode != 1)
 		pDM_Odm->RFCalibrateInfo.TxPowerTrackControl = true;
 	MSG_88E("pDM_Odm TxPowerTrackControl = %d\n", pDM_Odm->RFCalibrateInfo.TxPowerTrackControl);
 
@@ -1035,11 +1033,11 @@ void odm_EdcaTurboCheckCE(struct odm_dm_struct *pDM_Odm)
 	u64	cur_tx_bytes = 0;
 	u64	cur_rx_bytes = 0;
 	u8	bbtchange = false;
-	struct xmit_priv		*pxmitpriv = &(Adapter->xmitpriv);
-	struct recv_priv		*precvpriv = &(Adapter->recvpriv);
+	struct xmit_priv		*pxmitpriv = &Adapter->xmitpriv;
+	struct recv_priv		*precvpriv = &Adapter->recvpriv;
 	struct registry_priv	*pregpriv = &Adapter->registrypriv;
-	struct mlme_ext_priv	*pmlmeext = &(Adapter->mlmeextpriv);
-	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
+	struct mlme_ext_priv	*pmlmeext = &Adapter->mlmeextpriv;
+	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;
 
 	if (pregpriv->wifi_spec == 1) /*  (pmlmeinfo->HT_enable == 0)) */
 		goto dm_CheckEdcaTurbo_EXIT;
diff --git a/drivers/staging/rtl8188eu/hal/odm_hwconfig.c b/drivers/staging/rtl8188eu/hal/odm_hwconfig.c
index a6f2731b076d..65a346ae3cb0 100644
--- a/drivers/staging/rtl8188eu/hal/odm_hwconfig.c
+++ b/drivers/staging/rtl8188eu/hal/odm_hwconfig.c
@@ -5,8 +5,6 @@
  *
  ******************************************************************************/
 
-/*  include files */
-
 #include "odm_precomp.h"
 
 #define READ_AND_CONFIG     READ_AND_CONFIG_MP
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index b9025815b682..5eca3625d5a8 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -345,8 +345,8 @@ static void dm_txpwr_track_setpwr(struct odm_dm_struct *dm_odm)
 {
 	if (dm_odm->BbSwingFlagOfdm || dm_odm->BbSwingFlagCck) {
 		ODM_RT_TRACE(dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
-			     ("dm_txpwr_track_setpwr CH=%d\n", *(dm_odm->pChannel)));
-		phy_set_tx_power_level(dm_odm->Adapter, *(dm_odm->pChannel));
+			     ("dm_txpwr_track_setpwr CH=%d\n", *dm_odm->pChannel));
+		phy_set_tx_power_level(dm_odm->Adapter, *dm_odm->pChannel);
 		dm_odm->BbSwingFlagOfdm = false;
 		dm_odm->BbSwingFlagCck = false;
 	}
@@ -975,7 +975,7 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
 
 	u32 retry_count = 9;
 
-	if (*(dm_odm->mp_mode) == 1)
+	if (*dm_odm->mp_mode == 1)
 		retry_count = 9;
 	else
 		retry_count = 2;
@@ -1320,7 +1320,7 @@ void rtl88eu_phy_lc_calibrate(struct adapter *adapt)
 	if (singletone || carrier_sup)
 		return;
 
-	while (*(dm_odm->pbScanInProcess) && timecount < timeout) {
+	while (*dm_odm->pbScanInProcess && timecount < timeout) {
 		mdelay(50);
 		timecount += 50;
 	}
diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
index 00a9f692bb06..6702f263c770 100644
--- a/drivers/staging/rtl8188eu/hal/rf.c
+++ b/drivers/staging/rtl8188eu/hal/rf.c
@@ -79,7 +79,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
 		}
 	}
 	for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
-		ptr = (u8 *)(&(tx_agc[idx1]));
+		ptr = (u8 *)(&tx_agc[idx1]);
 		for (idx2 = 0; idx2 < 4; idx2++) {
 			if (*ptr > RF6052_MAX_TX_PWR)
 				*ptr = RF6052_MAX_TX_PWR;
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index 371e746915dd..176716d3e903 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -256,7 +256,7 @@ static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
 	pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, min_t(u32, rate_len, 8), cur_network->SupportedRates, &pktlen);
 
 	/*  DS parameter set */
-	pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pktlen);
+	pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&cur_network->Configuration.DSConfig, &pktlen);
 
 	if ((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE) {
 		u32 ATIMWindow;
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
index 241f55b92808..1af919ff6d93 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
@@ -29,9 +29,6 @@ static void dm_InitGPIOSetting(struct adapter *Adapter)
 	usb_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);
 }
 
-/*  */
-/*  functions */
-/*  */
 static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
 {
 	struct hal_data_8188e *hal_data = Adapter->HalData;
diff --git a/drivers/staging/rtl8188eu/include/osdep_service.h b/drivers/staging/rtl8188eu/include/osdep_service.h
index c0114ad79788..0d3e4a6e7e85 100644
--- a/drivers/staging/rtl8188eu/include/osdep_service.h
+++ b/drivers/staging/rtl8188eu/include/osdep_service.h
@@ -50,7 +50,7 @@ struct	__queue	{
 
 static inline struct list_head *get_list_head(struct __queue *queue)
 {
-	return &(queue->queue);
+	return &queue->queue;
 }
 
 static inline int rtw_netif_queue_stopped(struct net_device *pnetdev)
diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h
index dd943c831d91..be30c9434a29 100644
--- a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h
+++ b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h
@@ -817,7 +817,7 @@ So the following defines for 92C is not entire!!!!!!
 /* 2 MCUFWDL */
 #define MCUFWDL_EN			BIT(0)
 #define MCUFWDL_RDY			BIT(1)
-#define FWDL_ChkSum_rpt			BIT(2)
+#define FWDL_CHKSUM_RPT			BIT(2)
 #define MACINI_RDY			BIT(3)
 #define BBINI_RDY			BIT(4)
 #define RFINI_RDY			BIT(5)
diff --git a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
index 9a89791720e0..d5968ef9f43d 100644
--- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
@@ -93,7 +93,7 @@ static char *translate_scan(struct adapter *padapter,
 			    struct wlan_network *pnetwork,
 			    char *start, char *stop)
 {
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct iw_event iwe;
 	u16 cap;
 	__le16 le_tmp;
@@ -417,7 +417,7 @@ static int wpa_set_encryption(struct net_device *dev, struct ieee_param *param,
 				ret = -EOPNOTSUPP;
 				goto exit;
 			}
-			memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), pwep->KeyMaterial, pwep->KeyLength);
+			memcpy(&psecuritypriv->dot11DefKey[wep_key_idx].skey[0], pwep->KeyMaterial, pwep->KeyLength);
 			psecuritypriv->dot11DefKeylen[wep_key_idx] = pwep->KeyLength;
 			rtw_set_key(padapter, psecuritypriv, wep_key_idx, 0);
 		}
@@ -444,8 +444,8 @@ static int wpa_set_encryption(struct net_device *dev, struct ieee_param *param,
 					memcpy(psta->dot118021x_UncstKey.skey,  param->u.crypt.key, min_t(u16, param->u.crypt.key_len, 16));
 
 					if (strcmp(param->u.crypt.alg, "TKIP") == 0) { /* set mic key */
-						memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8);
-						memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8);
+						memcpy(psta->dot11tkiptxmickey.skey, &param->u.crypt.key[16], 8);
+						memcpy(psta->dot11tkiprxmickey.skey, &param->u.crypt.key[24], 8);
 						padapter->securitypriv.busetkipkey = false;
 					}
 
@@ -454,8 +454,8 @@ static int wpa_set_encryption(struct net_device *dev, struct ieee_param *param,
 					rtw_setstakey_cmd(padapter, (unsigned char *)psta, true);
 				} else { /* group key */
 					memcpy(padapter->securitypriv.dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, min_t(u16, param->u.crypt.key_len, 16 ));
-					memcpy(padapter->securitypriv.dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
-					memcpy(padapter->securitypriv.dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
+					memcpy(padapter->securitypriv.dot118021XGrptxmickey[param->u.crypt.idx].skey, &param->u.crypt.key[16], 8);
+					memcpy(padapter->securitypriv.dot118021XGrprxmickey[param->u.crypt.idx].skey, &param->u.crypt.key[24], 8);
 					padapter->securitypriv.binstallGrpkey = true;
 					DBG_88E(" ~~~~set sta key:groupkey\n");
 
@@ -620,7 +620,7 @@ static int rtw_wx_get_name(struct net_device *dev,
 	u32 ht_ielen = 0;
 	char *p;
 	u8 ht_cap = false;
-	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
+	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
 	struct wlan_bssid_ex  *pcur_bss = &pmlmepriv->cur_network.network;
 	NDIS_802_11_RATES_EX *prates = NULL;
 
@@ -669,7 +669,7 @@ static int rtw_wx_get_freq(struct net_device *dev,
 			     union iwreq_data *wrqu, char *extra)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
+	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
 	struct wlan_bssid_ex  *pcur_bss = &pmlmepriv->cur_network.network;
 
 	if (check_fwstate(pmlmepriv, _FW_LINKED)) {
@@ -738,7 +738,7 @@ static int rtw_wx_get_mode(struct net_device *dev, struct iw_request_info *a,
 			     union iwreq_data *wrqu, char *b)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
+	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
 
 	RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, (" rtw_wx_get_mode\n"));
 
@@ -938,10 +938,10 @@ static int rtw_wx_set_wap(struct net_device *dev,
 	uint ret = 0;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
 	struct sockaddr *temp = (struct sockaddr *)awrq;
-	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
+	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
 	struct list_head *phead;
 	u8 *dst_bssid, *src_bssid;
-	struct __queue *queue	= &(pmlmepriv->scanned_queue);
+	struct __queue *queue	= &pmlmepriv->scanned_queue;
 	struct	wlan_network	*pnetwork = NULL;
 	enum ndis_802_11_auth_mode	authmode;
 
@@ -1002,7 +1002,7 @@ static int rtw_wx_get_wap(struct net_device *dev,
 			    union iwreq_data *wrqu, char *extra)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
+	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
 	struct wlan_bssid_ex  *pcur_bss = &pmlmepriv->cur_network.network;
 
 	wrqu->ap_addr.sa_family = ARPHRD_ETHER;
@@ -1188,8 +1188,8 @@ static int rtw_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
 {
 	struct list_head *plist, *phead;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
-	struct __queue *queue	= &(pmlmepriv->scanned_queue);
+	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
+	struct __queue *queue	= &pmlmepriv->scanned_queue;
 	struct	wlan_network	*pnetwork = NULL;
 	char *ev = extra;
 	char *stop = ev + wrqu->data.length;
@@ -1217,7 +1217,7 @@ static int rtw_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
 			break;
 	}
 
-	spin_lock_bh(&(pmlmepriv->scanned_queue.lock));
+	spin_lock_bh(&pmlmepriv->scanned_queue.lock);
 
 	phead = get_list_head(queue);
 	plist = phead->next;
@@ -1358,7 +1358,7 @@ static int rtw_wx_get_essid(struct net_device *dev,
 {
 	u32 len;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
+	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
 	struct wlan_bssid_ex  *pcur_bss = &pmlmepriv->cur_network.network;
 
 	RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_wx_get_essid\n"));
@@ -1564,7 +1564,7 @@ static int rtw_wx_set_enc(struct net_device *dev,
 	struct ndis_802_11_wep	 wep;
 	enum ndis_802_11_auth_mode authmode;
 
-	struct iw_point *erq = &(wrqu->encoding);
+	struct iw_point *erq = &wrqu->encoding;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
 	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
 
@@ -1675,8 +1675,8 @@ static int rtw_wx_get_enc(struct net_device *dev,
 {
 	uint key;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct iw_point *erq = &(wrqu->encoding);
-	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
+	struct iw_point *erq = &wrqu->encoding;
+	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
 
 	if (!check_fwstate(pmlmepriv, _FW_LINKED)) {
 		if (!check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) {
@@ -1759,7 +1759,7 @@ static int rtw_wx_set_auth(struct net_device *dev,
 			     union iwreq_data *wrqu, char *extra)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct iw_param *param = (struct iw_param *)&(wrqu->param);
+	struct iw_param *param = (struct iw_param *)&wrqu->param;
 	int ret = 0;
 
 	switch (param->flags & IW_AUTH_INDEX) {
@@ -2012,14 +2012,9 @@ static int wpa_supplicant_ioctl(struct net_device *dev, struct iw_point *p)
 	if (!p->pointer || p->length != sizeof(struct ieee_param))
 		return -EINVAL;
 
-	param = (struct ieee_param *)rtw_malloc(p->length);
-	if (!param)
-		return -ENOMEM;
-
-	if (copy_from_user(param, p->pointer, p->length)) {
-		kfree(param);
-		return -EFAULT;
-	}
+	param = memdup_user(p->pointer, p->length);
+	if (IS_ERR(param))
+		return PTR_ERR(param);
 
 	switch (param->cmd) {
 	case IEEE_CMD_SET_WPA_PARAM:
@@ -2093,7 +2088,7 @@ static int set_group_key(struct adapter *padapter, u8 *key, u8 alg, int keyid)
 	u8 keylen;
 	struct cmd_obj *pcmd;
 	struct setkey_parm *psetkeyparm;
-	struct cmd_priv	*pcmdpriv = &(padapter->cmdpriv);
+	struct cmd_priv	*pcmdpriv = &padapter->cmdpriv;
 	int res = _SUCCESS;
 
 	DBG_88E("%s\n", __func__);
@@ -2130,7 +2125,7 @@ static int set_group_key(struct adapter *padapter, u8 *key, u8 alg, int keyid)
 		keylen = 16;
 	}
 
-	memcpy(&(psetkeyparm->key[0]), key, keylen);
+	memcpy(&psetkeyparm->key[0], key, keylen);
 
 	pcmd->cmdcode = _SetKey_CMD_;
 	pcmd->parmbuf = (u8 *)psetkeyparm;
@@ -2173,7 +2168,7 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
 	struct sta_info *psta = NULL, *pbcmc_sta = NULL;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
 	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
-	struct security_priv *psecuritypriv = &(padapter->securitypriv);
+	struct security_priv *psecuritypriv = &padapter->securitypriv;
 	struct sta_priv *pstapriv = &padapter->stapriv;
 
 	DBG_88E("%s\n", __func__);
@@ -2245,7 +2240,7 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
 
 			psecuritypriv->dot11PrivacyKeyIndex = wep_key_idx;
 
-			memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), pwep->KeyMaterial, pwep->KeyLength);
+			memcpy(&psecuritypriv->dot11DefKey[wep_key_idx].skey[0], pwep->KeyMaterial, pwep->KeyLength);
 
 			psecuritypriv->dot11DefKeylen[wep_key_idx] = pwep->KeyLength;
 
@@ -2256,7 +2251,7 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
 			/* don't update "psecuritypriv->dot11PrivacyAlgrthm" and */
 			/* psecuritypriv->dot11PrivacyKeyIndex = keyid", but can rtw_set_key to cam */
 
-			memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), pwep->KeyMaterial, pwep->KeyLength);
+			memcpy(&psecuritypriv->dot11DefKey[wep_key_idx].skey[0], pwep->KeyMaterial, pwep->KeyLength);
 
 			psecuritypriv->dot11DefKeylen[wep_key_idx] = pwep->KeyLength;
 
@@ -2283,8 +2278,8 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
 				memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,
 					    param->u.crypt.key, min_t(u16, param->u.crypt.key_len, 16));
 				/* set mic key */
-				memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
-				memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
+				memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &param->u.crypt.key[16], 8);
+				memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &param->u.crypt.key[24], 8);
 
 				psecuritypriv->busetkipkey = true;
 			} else if (strcmp(param->u.crypt.alg, "CCMP") == 0) {
@@ -2326,8 +2321,8 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
 					psta->dot118021XPrivacy = _TKIP_;
 
 					/* set mic key */
-					memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8);
-					memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8);
+					memcpy(psta->dot11tkiptxmickey.skey, &param->u.crypt.key[16], 8);
+					memcpy(psta->dot11tkiprxmickey.skey, &param->u.crypt.key[24], 8);
 
 					psecuritypriv->busetkipkey = true;
 				} else if (strcmp(param->u.crypt.alg, "CCMP") == 0) {
@@ -2357,8 +2352,8 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
 						    param->u.crypt.key, min_t(u16, param->u.crypt.key_len, 16));
 
 					/* set mic key */
-					memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
-					memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
+					memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &param->u.crypt.key[16], 8);
+					memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &param->u.crypt.key[24], 8);
 
 					psecuritypriv->busetkipkey = true;
 				} else if (strcmp(param->u.crypt.alg, "CCMP") == 0) {
@@ -2398,7 +2393,7 @@ static int rtw_set_beacon(struct net_device *dev, struct ieee_param *param, int
 {
 	int ret = 0;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct sta_priv *pstapriv = &padapter->stapriv;
 	unsigned char *pbuf = param->u.bcn_ie.buf;
 
@@ -2436,7 +2431,7 @@ static int rtw_add_sta(struct net_device *dev, struct ieee_param *param)
 	int ret = 0;
 	struct sta_info *psta = NULL;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct sta_priv *pstapriv = &padapter->stapriv;
 
 	DBG_88E("rtw_add_sta(aid =%d) =%pM\n", param->u.add_sta.aid, (param->sta_addr));
@@ -2489,7 +2484,7 @@ static int rtw_del_sta(struct net_device *dev, struct ieee_param *param)
 {
 	struct sta_info *psta = NULL;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct sta_priv *pstapriv = &padapter->stapriv;
 	int updated = 0;
 
@@ -2524,7 +2519,7 @@ static int rtw_ioctl_get_sta_data(struct net_device *dev, struct ieee_param *par
 	int ret = 0;
 	struct sta_info *psta = NULL;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct sta_priv *pstapriv = &padapter->stapriv;
 	struct ieee_param_ex *param_ex = (struct ieee_param_ex *)param;
 	struct sta_data *psta_data = (struct sta_data *)param_ex->data;
@@ -2580,7 +2575,7 @@ static int rtw_get_sta_wpaie(struct net_device *dev, struct ieee_param *param)
 	int ret = 0;
 	struct sta_info *psta = NULL;
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct sta_priv *pstapriv = &padapter->stapriv;
 
 	DBG_88E("rtw_get_sta_wpaie, sta_addr: %pM\n", (param->sta_addr));
@@ -2616,8 +2611,8 @@ static int rtw_set_wps_beacon(struct net_device *dev, struct ieee_param *param,
 {
 	unsigned char wps_oui[4] = {0x0, 0x50, 0xf2, 0x04};
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
-	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
+	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
 	int ie_len;
 
 	DBG_88E("%s, len =%d\n", __func__, len);
@@ -2651,7 +2646,7 @@ static int rtw_set_wps_beacon(struct net_device *dev, struct ieee_param *param,
 static int rtw_set_wps_probe_resp(struct net_device *dev, struct ieee_param *param, int len)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	int ie_len;
 
 	DBG_88E("%s, len =%d\n", __func__, len);
@@ -2680,7 +2675,7 @@ static int rtw_set_wps_probe_resp(struct net_device *dev, struct ieee_param *par
 static int rtw_set_wps_assoc_resp(struct net_device *dev, struct ieee_param *param, int len)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	int ie_len;
 
 	DBG_88E("%s, len =%d\n", __func__, len);
@@ -2710,9 +2705,9 @@ static int rtw_set_wps_assoc_resp(struct net_device *dev, struct ieee_param *par
 static int rtw_set_hidden_ssid(struct net_device *dev, struct ieee_param *param, int len)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
-	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
-	struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
+	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
+	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
 
 	u8 value;
 
@@ -2734,7 +2729,7 @@ static int rtw_set_hidden_ssid(struct net_device *dev, struct ieee_param *param,
 static int rtw_ioctl_acl_remove_sta(struct net_device *dev, struct ieee_param *param, int len)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 
 	if (!check_fwstate(pmlmepriv, WIFI_AP_STATE))
 		return -EINVAL;
@@ -2748,7 +2743,7 @@ static int rtw_ioctl_acl_remove_sta(struct net_device *dev, struct ieee_param *p
 static int rtw_ioctl_acl_add_sta(struct net_device *dev, struct ieee_param *param, int len)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 
 	if (!check_fwstate(pmlmepriv, WIFI_AP_STATE))
 		return -EINVAL;
@@ -2762,7 +2757,7 @@ static int rtw_ioctl_acl_add_sta(struct net_device *dev, struct ieee_param *para
 static int rtw_ioctl_set_macaddr_acl(struct net_device *dev, struct ieee_param *param, int len)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 
 	if (!check_fwstate(pmlmepriv, WIFI_AP_STATE))
 		return -EINVAL;
@@ -2789,14 +2784,9 @@ static int rtw_hostapd_ioctl(struct net_device *dev, struct iw_point *p)
 	if (!p->pointer || p->length != sizeof(struct ieee_param))
 		return -EINVAL;
 
-	param = (struct ieee_param *)rtw_malloc(p->length);
-	if (!param)
-		return -ENOMEM;
-
-	if (copy_from_user(param, p->pointer, p->length)) {
-		kfree(param);
-		return -EFAULT;
-	}
+	param = memdup_user(p->pointer, p->length);
+	if (IS_ERR(param))
+		return PTR_ERR(param);
 
 	switch (param->cmd) {
 	case RTL871X_HOSTAPD_FLUSH:
@@ -2882,7 +2872,7 @@ static int rtw_wx_set_priv(struct net_device *dev,
 	/* added for wps2.0 @20110524 */
 	if (dwrq->flags == 0x8766 && len > 8) {
 		u32 cp_sz;
-		struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
+		struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 		u8 *probereq_wpsie = ext;
 		int probereq_wpsie_len = len;
 		u8 wps_oui[4] = {0x0, 0x50, 0xf2, 0x04};
diff --git a/drivers/staging/rtl8188eu/os_dep/rtw_android.c b/drivers/staging/rtl8188eu/os_dep/rtw_android.c
index daf6db354982..bf86d03820ca 100644
--- a/drivers/staging/rtl8188eu/os_dep/rtw_android.c
+++ b/drivers/staging/rtl8188eu/os_dep/rtw_android.c
@@ -77,7 +77,7 @@ static int rtw_android_get_rssi(struct net_device *net, char *command,
 				int total_len)
 {
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(net);
-	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
+	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
 	struct	wlan_network	*pcur_network = &pmlmepriv->cur_network;
 	int bytes_written = 0;
 
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
index 20e494186c9e..43494a2b6f05 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
@@ -2444,7 +2444,7 @@ static void _rtl92e_dm_init_dynamic_tx_power(struct net_device *dev)
 static void _rtl92e_dm_dynamic_tx_power(struct net_device *dev)
 {
 	struct r8192_priv *priv = rtllib_priv(dev);
-	unsigned int txhipower_threshhold = 0;
+	unsigned int txhipower_threshold = 0;
 	unsigned int txlowpower_threshold = 0;
 
 	if (priv->rtllib->bdynamic_txpower_enable != true) {
@@ -2454,10 +2454,10 @@ static void _rtl92e_dm_dynamic_tx_power(struct net_device *dev)
 	}
 	if ((priv->rtllib->pHTInfo->IOTPeer == HT_IOT_PEER_ATHEROS) &&
 	    (priv->rtllib->mode == IEEE_G)) {
-		txhipower_threshhold = TX_POWER_ATHEROAP_THRESH_HIGH;
+		txhipower_threshold = TX_POWER_ATHEROAP_THRESH_HIGH;
 		txlowpower_threshold = TX_POWER_ATHEROAP_THRESH_LOW;
 	} else {
-		txhipower_threshhold = TX_POWER_NEAR_FIELD_THRESH_HIGH;
+		txhipower_threshold = TX_POWER_NEAR_FIELD_THRESH_HIGH;
 		txlowpower_threshold = TX_POWER_NEAR_FIELD_THRESH_LOW;
 	}
 
@@ -2465,7 +2465,7 @@ static void _rtl92e_dm_dynamic_tx_power(struct net_device *dev)
 		 priv->undecorated_smoothed_pwdb);
 
 	if (priv->rtllib->state == RTLLIB_LINKED) {
-		if (priv->undecorated_smoothed_pwdb >= txhipower_threshhold) {
+		if (priv->undecorated_smoothed_pwdb >= txhipower_threshold) {
 			priv->bDynamicTxHighPower = true;
 			priv->bDynamicTxLowPower = false;
 		} else {
diff --git a/drivers/staging/rtl8712/rtl871x_xmit.c b/drivers/staging/rtl8712/rtl871x_xmit.c
index f0b85338b567..2f0d0ffa6fae 100644
--- a/drivers/staging/rtl8712/rtl871x_xmit.c
+++ b/drivers/staging/rtl8712/rtl871x_xmit.c
@@ -71,12 +71,13 @@ int _r8712_init_xmit_priv(struct xmit_priv *pxmitpriv,
 	_init_queue(&pxmitpriv->apsd_queue);
 	_init_queue(&pxmitpriv->free_xmit_queue);
 	/*
-	 * Please allocate memory with the sz = (struct xmit_frame) * NR_XMITFRAME,
+	 * Please allocate memory with sz = (struct xmit_frame) * NR_XMITFRAME,
 	 * and initialize free_xmit_frame below.
 	 * Please also apply  free_txobj to link_up all the xmit_frames...
 	 */
 	pxmitpriv->pallocated_frame_buf =
-		kmalloc(NR_XMITFRAME * sizeof(struct xmit_frame) + 4, GFP_ATOMIC);
+		kmalloc(NR_XMITFRAME * sizeof(struct xmit_frame) + 4,
+			GFP_ATOMIC);
 	if (!pxmitpriv->pallocated_frame_buf) {
 		pxmitpriv->pxmit_frame_buf = NULL;
 		return -ENOMEM;
@@ -126,8 +127,8 @@ int _r8712_init_xmit_priv(struct xmit_priv *pxmitpriv,
 	pxmitbuf = (struct xmit_buf *)pxmitpriv->pxmitbuf;
 	for (i = 0; i < NR_XMITBUFF; i++) {
 		INIT_LIST_HEAD(&pxmitbuf->list);
-		pxmitbuf->pallocated_buf = kmalloc(MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ,
-						   GFP_ATOMIC);
+		pxmitbuf->pallocated_buf =
+			kmalloc(MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ, GFP_ATOMIC);
 		if (!pxmitbuf->pallocated_buf)
 			return -ENOMEM;
 		pxmitbuf->pbuf = pxmitbuf->pallocated_buf + XMITBUF_ALIGN_SZ -
@@ -350,7 +351,7 @@ static int xmitframe_addmic(struct _adapter *padapter,
 	struct	sta_info *stainfo;
 	struct	qos_priv *pqospriv = &(padapter->mlmepriv.qospriv);
 	struct	pkt_attrib  *pattrib = &pxmitframe->attrib;
-	struct	security_priv *psecuritypriv = &padapter->securitypriv;
+	struct	security_priv *psecpriv = &padapter->securitypriv;
 	struct	xmit_priv *pxmitpriv = &padapter->xmitpriv;
 	u8 priority[4] = {0x0, 0x0, 0x0, 0x0};
 	bool bmcst = is_multicast_ether_addr(pattrib->ra);
@@ -368,15 +369,14 @@ static int xmitframe_addmic(struct _adapter *padapter,
 					   0x0, 0x0};
 			pframe = pxmitframe->buf_addr + TXDESC_OFFSET;
 			if (bmcst) {
-				if (!memcmp(psecuritypriv->XGrptxmickey
-				   [psecuritypriv->XGrpKeyid].skey,
+				if (!memcmp(psecpriv->XGrptxmickey
+				   [psecpriv->XGrpKeyid].skey,
 				   null_key, 16))
 					return -ENOMEM;
 				/*start to calculate the mic code*/
 				r8712_secmicsetkey(&micdata,
-					 psecuritypriv->
-					 XGrptxmickey[psecuritypriv->
-					XGrpKeyid].skey);
+					psecpriv->XGrptxmickey
+					[psecpriv->XGrpKeyid].skey);
 			} else {
 				if (!memcmp(&stainfo->tkiptxmickey.skey[0],
 					    null_key, 16))
@@ -416,7 +416,7 @@ static int xmitframe_addmic(struct _adapter *padapter,
 					length = pattrib->last_txcmdsz -
 						  pattrib->hdrlen -
 						  pattrib->iv_len -
-						  ((psecuritypriv->sw_encrypt)
+						  ((psecpriv->sw_encrypt)
 						  ? pattrib->icv_len : 0);
 					r8712_secmicappend(&micdata, payload,
 							   length);
@@ -424,7 +424,7 @@ static int xmitframe_addmic(struct _adapter *padapter,
 				} else {
 					length = pxmitpriv->frag_len -
 					    pattrib->hdrlen - pattrib->iv_len -
-					    ((psecuritypriv->sw_encrypt) ?
+					    ((psecpriv->sw_encrypt) ?
 					    pattrib->icv_len : 0);
 					r8712_secmicappend(&micdata, payload,
 							   length);
@@ -477,75 +477,72 @@ static int make_wlanhdr(struct _adapter *padapter, u8 *hdr,
 	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct qos_priv *pqospriv = &pmlmepriv->qospriv;
 	__le16 *fctrl = &pwlanhdr->frame_ctl;
+	u8 *bssid;
 
 	memset(hdr, 0, WLANHDR_OFFSET);
 	SetFrameSubType(fctrl, pattrib->subtype);
-	if (pattrib->subtype & WIFI_DATA_TYPE) {
-		if (check_fwstate(pmlmepriv,  WIFI_STATION_STATE)) {
-			/* to_ds = 1, fr_ds = 0; */
-			SetToDs(fctrl);
-			memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv),
-				ETH_ALEN);
-			memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
-			memcpy(pwlanhdr->addr3, pattrib->dst, ETH_ALEN);
-		} else if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
-			/* to_ds = 0, fr_ds = 1; */
-			SetFrDs(fctrl);
-			memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN);
-			memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv),
-				ETH_ALEN);
-			memcpy(pwlanhdr->addr3, pattrib->src, ETH_ALEN);
-		} else if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) ||
-			   check_fwstate(pmlmepriv,
-					 WIFI_ADHOC_MASTER_STATE)) {
-			memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN);
-			memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
-			memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv),
-				ETH_ALEN);
-		} else if (check_fwstate(pmlmepriv, WIFI_MP_STATE)) {
-			memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN);
-			memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
-			memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv),
-				ETH_ALEN);
-		} else {
-			return -EINVAL;
-		}
+	if (!(pattrib->subtype & WIFI_DATA_TYPE))
+		return 0;
 
-		if (pattrib->encrypt)
-			SetPrivacy(fctrl);
-		if (pqospriv->qos_option) {
-			qc = (unsigned short *)(hdr + pattrib->hdrlen - 2);
-			if (pattrib->priority)
-				SetPriority(qc, pattrib->priority);
-			SetAckpolicy(qc, pattrib->ack_policy);
-		}
-		/* TODO: fill HT Control Field */
-		/* Update Seq Num will be handled by f/w */
-		{
-			struct sta_info *psta;
-			bool bmcst = is_multicast_ether_addr(pattrib->ra);
-
-			if (pattrib->psta) {
-				psta = pattrib->psta;
-			} else {
-				if (bmcst)
-					psta = r8712_get_bcmc_stainfo(padapter);
-				else
-					psta =
-					 r8712_get_stainfo(&padapter->stapriv,
-					 pattrib->ra);
-			}
-			if (psta) {
-				psta->sta_xmitpriv.txseq_tid
-						  [pattrib->priority]++;
-				psta->sta_xmitpriv.txseq_tid[pattrib->priority]
-						   &= 0xFFF;
-				pattrib->seqnum = psta->sta_xmitpriv.
-						  txseq_tid[pattrib->priority];
-				SetSeqNum(hdr, pattrib->seqnum);
-			}
+	bssid = get_bssid(pmlmepriv);
+
+	if (check_fwstate(pmlmepriv,  WIFI_STATION_STATE)) {
+		/* to_ds = 1, fr_ds = 0; */
+		SetToDs(fctrl);
+		ether_addr_copy(pwlanhdr->addr1, bssid);
+		ether_addr_copy(pwlanhdr->addr2, pattrib->src);
+		ether_addr_copy(pwlanhdr->addr3, pattrib->dst);
+	} else if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
+		/* to_ds = 0, fr_ds = 1; */
+		SetFrDs(fctrl);
+		ether_addr_copy(pwlanhdr->addr1, pattrib->dst);
+		ether_addr_copy(pwlanhdr->addr2, bssid);
+		ether_addr_copy(pwlanhdr->addr3, pattrib->src);
+	} else if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) ||
+		   check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) {
+		ether_addr_copy(pwlanhdr->addr1, pattrib->dst);
+		ether_addr_copy(pwlanhdr->addr2, pattrib->src);
+		ether_addr_copy(pwlanhdr->addr3, bssid);
+	} else if (check_fwstate(pmlmepriv, WIFI_MP_STATE)) {
+		ether_addr_copy(pwlanhdr->addr1, pattrib->dst);
+		ether_addr_copy(pwlanhdr->addr2, pattrib->src);
+		ether_addr_copy(pwlanhdr->addr3, bssid);
+	} else {
+		return -EINVAL;
+	}
+
+	if (pattrib->encrypt)
+		SetPrivacy(fctrl);
+	if (pqospriv->qos_option) {
+		qc = (unsigned short *)(hdr + pattrib->hdrlen - 2);
+		if (pattrib->priority)
+			SetPriority(qc, pattrib->priority);
+		SetAckpolicy(qc, pattrib->ack_policy);
+	}
+	/* TODO: fill HT Control Field */
+	/* Update Seq Num will be handled by f/w */
+	{
+		struct sta_info *psta;
+		bool bmcst = is_multicast_ether_addr(pattrib->ra);
+
+		if (pattrib->psta)
+			psta = pattrib->psta;
+		else if (bmcst)
+			psta = r8712_get_bcmc_stainfo(padapter);
+		else
+			psta = r8712_get_stainfo(&padapter->stapriv,
+						 pattrib->ra);
+
+		if (psta) {
+			u16 *txtid = psta->sta_xmitpriv.txseq_tid;
+
+			txtid[pattrib->priority]++;
+			txtid[pattrib->priority] &= 0xFFF;
+			pattrib->seqnum = txtid[pattrib->priority];
+			SetSeqNum(hdr, pattrib->seqnum);
 		}
 	}
+
 	return 0;
 }
 
@@ -589,7 +586,7 @@ sint r8712_xmitframe_coalesce(struct _adapter *padapter, _pkt *pkt,
 	addr_t addr;
 	u8 *pframe, *mem_start, *ptxdesc;
 	struct sta_info		*psta;
-	struct security_priv	*psecuritypriv = &padapter->securitypriv;
+	struct security_priv	*psecpriv = &padapter->securitypriv;
 	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
 	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
 	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
@@ -632,15 +629,13 @@ sint r8712_xmitframe_coalesce(struct _adapter *padapter, _pkt *pkt,
 				case _WEP40_:
 				case _WEP104_:
 					WEP_IV(pattrib->iv, psta->txpn,
-					       (u8)psecuritypriv->
-					       PrivacyKeyIndex);
+					       (u8)psecpriv->PrivacyKeyIndex);
 					break;
 				case _TKIP_:
 					if (bmcst)
 						TKIP_IV(pattrib->iv,
 						    psta->txpn,
-						    (u8)psecuritypriv->
-						    XGrpKeyid);
+						    (u8)psecpriv->XGrpKeyid);
 					else
 						TKIP_IV(pattrib->iv, psta->txpn,
 							0);
@@ -648,8 +643,7 @@ sint r8712_xmitframe_coalesce(struct _adapter *padapter, _pkt *pkt,
 				case _AES_:
 					if (bmcst)
 						AES_IV(pattrib->iv, psta->txpn,
-						    (u8)psecuritypriv->
-						    XGrpKeyid);
+						    (u8)psecpriv->XGrpKeyid);
 					else
 						AES_IV(pattrib->iv, psta->txpn,
 						       0);
diff --git a/drivers/staging/rtl8712/rtl871x_xmit.h b/drivers/staging/rtl8712/rtl871x_xmit.h
index f227828094bf..c0c0c781fe17 100644
--- a/drivers/staging/rtl8712/rtl871x_xmit.h
+++ b/drivers/staging/rtl8712/rtl871x_xmit.h
@@ -115,7 +115,7 @@ struct pkt_attrib {
 	u8	icv_len;
 	unsigned char iv[8];
 	unsigned char icv[8];
-	u8	dst[ETH_ALEN];
+	u8	dst[ETH_ALEN] __aligned(2);	/* for ether_addr_copy */
 	u8	src[ETH_ALEN];
 	u8	ta[ETH_ALEN];
 	u8	ra[ETH_ALEN];
diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c
index 6cc4a704c3a0..313c569748e9 100644
--- a/drivers/staging/rtl8712/usb_halinit.c
+++ b/drivers/staging/rtl8712/usb_halinit.c
@@ -58,7 +58,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *adapter)
 		r8712_write8(adapter, SYS_ISO_CTRL + 1, val8);
 		val8 = r8712_read8(adapter, SYS_ISO_CTRL + 1);
 		val8 = val8 & 0xEF;
-		/* attatch AFE PLL to MACTOP/BB/PCIe Digital */
+		/* attach AFE PLL to MACTOP/BB/PCIe Digital */
 		r8712_write8(adapter, SYS_ISO_CTRL + 1, val8);
 		val8 = r8712_read8(adapter, AFE_XTAL_CTRL + 1);
 		val8 = val8 & 0xFB;
diff --git a/drivers/staging/rtl8723bs/core/rtw_cmd.c b/drivers/staging/rtl8723bs/core/rtw_cmd.c
index efb5135ad743..bd18d1803e27 100644
--- a/drivers/staging/rtl8723bs/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723bs/core/rtw_cmd.c
@@ -822,7 +822,7 @@ u8 rtw_joinbss_cmd(struct adapter  *padapter, struct wlan_network *pnetwork)
 
 	psecnetwork->IELength = 0;
 	/*  Added by Albert 2009/02/18 */
-	/*  If the the driver wants to use the bssid to create the connection. */
+	/*  If the driver wants to use the bssid to create the connection. */
 	/*  If not,  we have to copy the connecting AP's MAC address to it so that */
 	/*  the driver just has the bssid information for PMKIDList searching. */
 
diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
index d7a58af76ea0..e65c5a870b46 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme.c
@@ -1097,9 +1097,6 @@ inline void rtw_indicate_scan_done(struct adapter *padapter, bool aborted)
 	    (!adapter_to_pwrctl(padapter)->bInSuspend) &&
 	    (!check_fwstate(&padapter->mlmepriv,
 			    WIFI_ASOC_STATE|WIFI_UNDER_LINKING))) {
-		struct pwrctrl_priv *pwrpriv;
-
-		pwrpriv = adapter_to_pwrctl(padapter);
 		rtw_set_ips_deny(padapter, 0);
 		_set_timer(&padapter->mlmepriv.dynamic_chk_timer, 1);
 	}
@@ -2917,12 +2914,11 @@ void rtw_append_exented_cap(struct adapter *padapter, u8 *out_ie, uint *pout_len
 	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct ht_priv 	*phtpriv = &pmlmepriv->htpriv;
 	u8 cap_content[8] = {0};
-	u8 *pframe;
 
 	if (phtpriv->bss_coexist)
 		SET_EXT_CAPABILITY_ELE_BSS_COEXIST(cap_content, 1);
 
-	pframe = rtw_set_ie(out_ie + *pout_len, EID_EXTCapability, 8, cap_content, pout_len);
+	rtw_set_ie(out_ie + *pout_len, EID_EXTCapability, 8, cap_content, pout_len);
 }
 
 inline void rtw_set_to_roam(struct adapter *adapter, u8 to_roam)
diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
index 8f9da1d49343..d6d7198dfe45 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -1084,7 +1084,7 @@ unsigned int OnAuth(struct adapter *padapter, union recv_frame *precv_frame)
 
 unsigned int OnAuthClient(struct adapter *padapter, union recv_frame *precv_frame)
 {
-	unsigned int	seq, len, status, algthm, offset;
+	unsigned int	seq, len, status, offset;
 	unsigned char *p;
 	unsigned int	go2asoc = 0;
 	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
@@ -1103,7 +1103,6 @@ unsigned int OnAuthClient(struct adapter *padapter, union recv_frame *precv_fram
 
 	offset = (GetPrivacy(pframe)) ? 4 : 0;
 
-	algthm	= le16_to_cpu(*(__le16 *)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + offset));
 	seq	= le16_to_cpu(*(__le16 *)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + offset + 2));
 	status	= le16_to_cpu(*(__le16 *)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + offset + 4));
 
@@ -1170,7 +1169,7 @@ unsigned int OnAuthClient(struct adapter *padapter, union recv_frame *precv_fram
 
 unsigned int OnAssocReq(struct adapter *padapter, union recv_frame *precv_frame)
 {
-	u16 capab_info, listen_interval;
+	u16 capab_info;
 	struct rtw_ieee802_11_elems elems;
 	struct sta_info *pstat;
 	unsigned char 	reassoc, *p, *pos, *wpa_ie;
@@ -1216,8 +1215,6 @@ unsigned int OnAssocReq(struct adapter *padapter, union recv_frame *precv_frame)
 
 	capab_info = RTW_GET_LE16(pframe + WLAN_HDR_A3_LEN);
 	/* capab_info = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN)); */
-	/* listen_interval = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN+2)); */
-	listen_interval = RTW_GET_LE16(pframe + WLAN_HDR_A3_LEN+2);
 
 	left = pkt_len - (sizeof(struct ieee80211_hdr_3addr) + ie_offset);
 	pos = pframe + (sizeof(struct ieee80211_hdr_3addr) + ie_offset);
diff --git a/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c b/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
index 09d2ca30d653..e3f56c6cc882 100644
--- a/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
+++ b/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
@@ -553,7 +553,6 @@ u32 rtw_init_bcmc_stainfo(struct adapter *padapter)
 {
 
 	struct sta_info *psta;
-	struct tx_servq	*ptxservq;
 	u32 res = _SUCCESS;
 	NDIS_802_11_MAC_ADDRESS	bcast_addr = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
 
@@ -571,7 +570,6 @@ u32 rtw_init_bcmc_stainfo(struct adapter *padapter)
 	/*  default broadcast & multicast use macid 1 */
 	psta->mac_id = 1;
 
-	ptxservq = &(psta->sta_xmitpriv.be_q);
 exit:
 	return _SUCCESS;
 }
diff --git a/drivers/staging/rtl8723bs/core/rtw_wlan_util.c b/drivers/staging/rtl8723bs/core/rtw_wlan_util.c
index 110338dbe372..69bcd172b298 100644
--- a/drivers/staging/rtl8723bs/core/rtw_wlan_util.c
+++ b/drivers/staging/rtl8723bs/core/rtw_wlan_util.c
@@ -1271,13 +1271,13 @@ int rtw_check_bcn_info(struct adapter *Adapter, u8 *pframe, u32 packet_len)
 	unsigned char *pbuf;
 	u32 wpa_ielen = 0;
 	u8 *pbssid = GetAddr3Ptr(pframe);
-	u32 hidden_ssid = 0;
 	struct HT_info_element *pht_info = NULL;
 	struct rtw_ieee80211_ht_cap *pht_cap = NULL;
 	u32 bcn_channel;
 	unsigned short	ht_cap_info;
 	unsigned char ht_info_infos_0;
 	struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
+	int ssid_len;
 
 	if (is_client_associated_to_ap(Adapter) == false)
 		return true;
@@ -1370,21 +1370,15 @@ int rtw_check_bcn_info(struct adapter *Adapter, u8 *pframe, u32 packet_len)
 	}
 
 	/* checking SSID */
+	ssid_len = 0;
 	p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _SSID_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_);
-	if (!p) {
-		DBG_871X("%s marc: cannot find SSID for survey event\n", __func__);
-		hidden_ssid = true;
-	} else {
-		hidden_ssid = false;
-	}
-
-	if ((NULL != p) && (false == hidden_ssid && (*(p + 1)))) {
-		memcpy(bssid->Ssid.Ssid, (p + 2), *(p + 1));
-		bssid->Ssid.SsidLength = *(p + 1);
-	} else {
-		bssid->Ssid.SsidLength = 0;
-		bssid->Ssid.Ssid[0] = '\0';
+	if (p) {
+		ssid_len = *(p + 1);
+		if (ssid_len > NDIS_802_11_LENGTH_SSID)
+			ssid_len = 0;
 	}
+	memcpy(bssid->Ssid.Ssid, (p + 2), ssid_len);
+	bssid->Ssid.SsidLength = ssid_len;
 
 	RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("%s bssid.Ssid.Ssid:%s bssid.Ssid.SsidLength:%d "
 				"cur_network->network.Ssid.Ssid:%s len:%d\n", __func__, bssid->Ssid.Ssid,
diff --git a/drivers/staging/rtl8723bs/hal/hal_btcoex.c b/drivers/staging/rtl8723bs/hal/hal_btcoex.c
index d5793e4614bf..a6ed1bb9945e 100644
--- a/drivers/staging/rtl8723bs/hal/hal_btcoex.c
+++ b/drivers/staging/rtl8723bs/hal/hal_btcoex.c
@@ -12,49 +12,6 @@
 #include <Mp_Precomp.h>
 
 /* 		Global variables */
-static const char *const BtProfileString[] = {
-	"NONE",
-	"A2DP",
-	"PAN",
-	"HID",
-	"SCO",
-};
-
-static const char *const BtSpecString[] = {
-	"1.0b",
-	"1.1",
-	"1.2",
-	"2.0+EDR",
-	"2.1+EDR",
-	"3.0+HS",
-	"4.0",
-};
-
-static const char *const BtLinkRoleString[] = {
-	"Master",
-	"Slave",
-};
-
-static const char *const h2cStaString[] = {
-	"successful",
-	"h2c busy",
-	"rf off",
-	"fw not read",
-};
-
-static const char *const ioStaString[] = {
-	"success",
-	"can not IO",
-	"rf off",
-	"fw not read",
-	"wait io timeout",
-	"invalid len",
-	"idle Q empty",
-	"insert waitQ fail",
-	"unknown fail",
-	"wrong level",
-	"h2c stopped",
-};
 
 BTC_COEXIST GLBtCoexist;
 static u8 GLBtcWiFiInScanState;
diff --git a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
index 767e2a784f78..10250642d30a 100644
--- a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
+++ b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
@@ -1816,7 +1816,7 @@ static void phy_CrossReferenceHTAndVHTTxPowerLimit(struct adapter *padapter)
 	s8 tempPwrLmt = 0;
 
 	for (regulation = 0; regulation < MAX_REGULATION_NUM; ++regulation) {
-		for (bw = 0; bw < MAX_5G_BANDWITH_NUM; ++bw) {
+		for (bw = 0; bw < MAX_5G_BANDWIDTH_NUM; ++bw) {
 			for (channel = 0; channel < CHANNEL_MAX_NUMBER_5G; ++channel) {
 				for (rateSection = 0; rateSection < MAX_RATE_SECTION_NUM; ++rateSection) {
 					tempPwrLmt = pHalData->TxPwrLimit_5G[regulation][bw][rateSection][channel][ODM_RF_PATH_A];
@@ -1877,7 +1877,7 @@ void PHY_ConvertTxPowerLimitToPowerIndex(struct adapter *Adapter)
 	phy_CrossReferenceHTAndVHTTxPowerLimit(Adapter);
 
 	for (regulation = 0; regulation < MAX_REGULATION_NUM; ++regulation) {
-		for (bw = 0; bw < MAX_2_4G_BANDWITH_NUM; ++bw) {
+		for (bw = 0; bw < MAX_2_4G_BANDWIDTH_NUM; ++bw) {
 			for (channel = 0; channel < CHANNEL_MAX_NUMBER_2G; ++channel) {
 				for (rateSection = 0; rateSection < MAX_RATE_SECTION_NUM; ++rateSection) {
 					tempPwrLmt = pHalData->TxPwrLimit_2_4G[regulation][bw][rateSection][channel][ODM_RF_PATH_A];
@@ -1920,7 +1920,7 @@ void PHY_InitTxPowerLimit(struct adapter *Adapter)
 	/* DBG_871X("=====> PHY_InitTxPowerLimit()!\n"); */
 
 	for (i = 0; i < MAX_REGULATION_NUM; ++i) {
-		for (j = 0; j < MAX_2_4G_BANDWITH_NUM; ++j)
+		for (j = 0; j < MAX_2_4G_BANDWIDTH_NUM; ++j)
 			for (k = 0; k < MAX_RATE_SECTION_NUM; ++k)
 				for (m = 0; m < CHANNEL_MAX_NUMBER_2G; ++m)
 					for (l = 0; l < MAX_RF_PATH_NUM; ++l)
@@ -1928,7 +1928,7 @@ void PHY_InitTxPowerLimit(struct adapter *Adapter)
 	}
 
 	for (i = 0; i < MAX_REGULATION_NUM; ++i) {
-		for (j = 0; j < MAX_5G_BANDWITH_NUM; ++j)
+		for (j = 0; j < MAX_5G_BANDWIDTH_NUM; ++j)
 			for (k = 0; k < MAX_RATE_SECTION_NUM; ++k)
 				for (m = 0; m < CHANNEL_MAX_NUMBER_5G; ++m)
 					for (l = 0; l < MAX_RF_PATH_NUM; ++l)
diff --git a/drivers/staging/rtl8723bs/hal/odm.c b/drivers/staging/rtl8723bs/hal/odm.c
index aa6631ee4ea7..f2a9e95a1563 100644
--- a/drivers/staging/rtl8723bs/hal/odm.c
+++ b/drivers/staging/rtl8723bs/hal/odm.c
@@ -7,19 +7,6 @@
 
 #include "odm_precomp.h"
 
-static const u16 dB_Invert_Table[8][12] = {
-	{1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 4, 4},
-	{4, 5, 6, 6, 7, 8, 9, 10, 11, 13, 14, 16},
-	{18, 20, 22, 25, 28, 32, 35, 40, 45, 50, 56, 63},
-	{71, 79, 89, 100, 112, 126, 141, 158, 178, 200, 224, 251},
-	{282, 316, 355, 398, 447, 501, 562, 631, 708, 794, 891, 1000},
-	{1122, 1259, 1413, 1585, 1778, 1995, 2239, 2512, 2818, 3162, 3548, 3981},
-	{4467, 5012, 5623, 6310, 7079, 7943, 8913, 10000, 11220, 12589, 14125,
-	 15849},
-	{17783, 19953, 22387, 25119, 28184, 31623, 35481, 39811, 44668, 50119,
-	 56234, 65535}
- };
-
 /*  Global var */
 
 u32 OFDMSwingTable[OFDM_TABLE_SIZE] = {
diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index b77d1fe33a28..16e8f66a3171 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -541,7 +541,7 @@ typedef enum tag_Operation_Mode_Definition {
 
 /*  ODM_CMNINFO_WM_MODE */
 typedef enum tag_Wireless_Mode_Definition {
-	ODM_WM_UNKNOW     = 0x0,
+	ODM_WM_UNKNOWN    = 0x0,
 	ODM_WM_B          = BIT0,
 	ODM_WM_G          = BIT1,
 	ODM_WM_A          = BIT2,
diff --git a/drivers/staging/rtl8723bs/hal/odm_RegDefine11N.h b/drivers/staging/rtl8723bs/hal/odm_RegDefine11N.h
index f2c0707aad4c..1c6c08000e27 100644
--- a/drivers/staging/rtl8723bs/hal/odm_RegDefine11N.h
+++ b/drivers/staging/rtl8723bs/hal/odm_RegDefine11N.h
@@ -31,8 +31,8 @@
 #define	ODM_REG_TX_ANT_CTRL_11N			0x80C
 #define	ODM_REG_BB_PWR_SAV5_11N		0x818
 #define	ODM_REG_CCK_RPT_FORMAT_11N		0x824
-#define	ODM_REG_RX_DEFUALT_A_11N		0x858
-#define	ODM_REG_RX_DEFUALT_B_11N		0x85A
+#define	ODM_REG_RX_DEFAULT_A_11N		0x858
+#define	ODM_REG_RX_DEFAULT_B_11N		0x85A
 #define	ODM_REG_BB_PWR_SAV3_11N		0x85C
 #define	ODM_REG_ANTSEL_CTRL_11N			0x860
 #define	ODM_REG_RX_ANT_CTRL_11N			0x864
diff --git a/drivers/staging/rtl8723bs/hal/sdio_halinit.c b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
index 7853af53051d..e42d8c18e1ae 100644
--- a/drivers/staging/rtl8723bs/hal/sdio_halinit.c
+++ b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
@@ -544,13 +544,9 @@ static void _InitRetryFunction(struct adapter *padapter)
 
 static void HalRxAggr8723BSdio(struct adapter *padapter)
 {
-	struct registry_priv *pregistrypriv;
 	u8 valueDMATimeout;
 	u8 valueDMAPageCount;
 
-
-	pregistrypriv = &padapter->registrypriv;
-
 	valueDMATimeout = 0x06;
 	valueDMAPageCount = 0x06;
 
diff --git a/drivers/staging/rtl8723bs/include/hal_data.h b/drivers/staging/rtl8723bs/include/hal_data.h
index e5e667df6154..fa5d70016f05 100644
--- a/drivers/staging/rtl8723bs/include/hal_data.h
+++ b/drivers/staging/rtl8723bs/include/hal_data.h
@@ -56,9 +56,9 @@ enum RT_AMPDU_BURST {
 /*  Tx Power Limit Table Size */
 #define MAX_REGULATION_NUM			4
 #define MAX_RF_PATH_NUM_IN_POWER_LIMIT_TABLE	4
-#define MAX_2_4G_BANDWITH_NUM			4
+#define MAX_2_4G_BANDWIDTH_NUM			4
 #define MAX_RATE_SECTION_NUM			10
-#define MAX_5G_BANDWITH_NUM			4
+#define MAX_5G_BANDWIDTH_NUM			4
 
 #define MAX_BASE_NUM_IN_PHY_REG_PG_2_4G		10 /*   CCK:1, OFDM:1, HT:4, VHT:4 */
 #define MAX_BASE_NUM_IN_PHY_REG_PG_5G		9 /*  OFDM:1, HT:4, VHT:4 */
@@ -280,14 +280,14 @@ struct hal_com_data {
 
 	/*  Power Limit Table for 2.4G */
 	s8	TxPwrLimit_2_4G[MAX_REGULATION_NUM]
-						[MAX_2_4G_BANDWITH_NUM]
+						[MAX_2_4G_BANDWIDTH_NUM]
 	                                [MAX_RATE_SECTION_NUM]
 	                                [CHANNEL_MAX_NUMBER_2G]
 						[MAX_RF_PATH_NUM];
 
 	/*  Power Limit Table for 5G */
 	s8	TxPwrLimit_5G[MAX_REGULATION_NUM]
-						[MAX_5G_BANDWITH_NUM]
+						[MAX_5G_BANDWIDTH_NUM]
 						[MAX_RATE_SECTION_NUM]
 						[CHANNEL_MAX_NUMBER_5G]
 						[MAX_RF_PATH_NUM];
diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
index 1ba85a43f05a..888106e23653 100644
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
@@ -154,17 +154,6 @@ static struct ieee80211_supported_band *rtw_spt_band_alloc(
 
 static void rtw_spt_band_free(struct ieee80211_supported_band *spt_band)
 {
-	u32 size = 0;
-
-	if (!spt_band)
-		return;
-
-	if (spt_band->band == NL80211_BAND_2GHZ)
-	{
-		size = sizeof(struct ieee80211_supported_band)
-			+ sizeof(struct ieee80211_channel)*RTW_2G_CHANNELS_NUM
-			+ sizeof(struct ieee80211_rate)*RTW_G_RATES_NUM;
-	}
 	kfree(spt_band);
 }
 
@@ -3163,29 +3152,6 @@ static int cfg80211_rtw_mgmt_tx(struct wiphy *wiphy,
 	return ret;
 }
 
-static void cfg80211_rtw_mgmt_frame_register(struct wiphy *wiphy,
-	struct wireless_dev *wdev,
-	u16 frame_type, bool reg)
-{
-	struct net_device *ndev = wdev_to_ndev(wdev);
-	struct adapter *adapter;
-
-	if (ndev == NULL)
-		goto exit;
-
-	adapter = (struct adapter *)rtw_netdev_priv(ndev);
-
-#ifdef DEBUG_CFG80211
-	DBG_871X(FUNC_ADPT_FMT" frame_type:%x, reg:%d\n", FUNC_ADPT_ARG(adapter),
-		frame_type, reg);
-#endif
-
-	if (frame_type != (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ))
-		return;
-exit:
-	return;
-}
-
 #if defined(CONFIG_PNO_SUPPORT)
 static int cfg80211_rtw_sched_scan_start(struct wiphy *wiphy,
 		struct net_device *dev,
@@ -3397,7 +3363,6 @@ static struct cfg80211_ops rtw_cfg80211_ops = {
 	.change_bss = cfg80211_rtw_change_bss,
 
 	.mgmt_tx = cfg80211_rtw_mgmt_tx,
-	.mgmt_frame_register = cfg80211_rtw_mgmt_frame_register,
 
 #if defined(CONFIG_PNO_SUPPORT)
 	.sched_scan_start = cfg80211_rtw_sched_scan_start,
diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
index 5059b874080e..902ac8169948 100644
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
@@ -2561,14 +2561,16 @@ static int rtw_wps_start(struct net_device *dev,
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
 	struct iw_point *pdata = &wrqu->data;
 	u32   u32wps_start = 0;
-        unsigned int uintRet = 0;
 
 	if ((true == padapter->bDriverStopped) || (true == padapter->bSurpriseRemoved) || (NULL == pdata)) {
 		ret = -EINVAL;
 		goto exit;
 	}
 
-	uintRet = copy_from_user((void *)&u32wps_start, pdata->pointer, 4);
+	if (copy_from_user((void *)&u32wps_start, pdata->pointer, 4)) {
+		ret = -EFAULT;
+		goto exit;
+	}
 	if (u32wps_start == 0)
 		u32wps_start = *extra;
 
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 59568d18ce23..e478290b60a8 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -709,7 +709,9 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
 		} else {
 			output->paths = sm750_crt;
 			crtc->channel = sm750_primary;
-			/* not consider of padding stuffs for oScreen,need fix */
+			/* not consider of padding stuffs for oScreen,
+			 * need fix
+			 */
 			crtc->oScreen = sm750_dev->vidmem_size >> 1;
 			crtc->vScreen = sm750_dev->pvMem + crtc->oScreen;
 		}
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index ce90adcb449d..55fe5a28a174 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -59,16 +59,19 @@ struct lynx_accel {
 
 	int (*de_wait)(void);/* see if hardware ready to work */
 
-	int (*de_fillrect)(struct lynx_accel *, u32, u32, u32, u32,
-						u32, u32, u32, u32, u32);
-
-	int (*de_copyarea)(struct lynx_accel *, u32, u32, u32, u32,
-						u32, u32, u32, u32,
-						u32, u32, u32, u32);
-
-	int (*de_imageblit)(struct lynx_accel *, const char *, u32, u32, u32, u32,
-							       u32, u32, u32, u32,
-							       u32, u32, u32, u32);
+	int (*de_fillrect)(struct lynx_accel *,
+			   u32, u32, u32, u32,
+			   u32, u32, u32, u32, u32);
+
+	int (*de_copyarea)(struct lynx_accel *,
+			   u32, u32, u32, u32,
+			   u32, u32, u32, u32,
+			   u32, u32, u32, u32);
+
+	int (*de_imageblit)(struct lynx_accel *, const char *,
+			    u32, u32, u32, u32,
+			    u32, u32, u32, u32,
+			    u32, u32, u32, u32);
 
 };
 
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index b8d60701f898..7136d751cff5 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -51,7 +51,7 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 
 	/* now map mmio and vidmem */
 	sm750_dev->pvReg = ioremap(sm750_dev->vidreg_start,
-					   sm750_dev->vidreg_size);
+				   sm750_dev->vidreg_size);
 	if (!sm750_dev->pvReg) {
 		pr_err("mmio failed\n");
 		ret = -EFAULT;
diff --git a/drivers/staging/speakup/speakup_decext.c b/drivers/staging/speakup/speakup_decext.c
index ddbb7e97d118..7408eb29cf38 100644
--- a/drivers/staging/speakup/speakup_decext.c
+++ b/drivers/staging/speakup/speakup_decext.c
@@ -43,6 +43,7 @@ static struct var_t vars[] = {
 	{ CAPS_STOP, .u.s = {"[:dv ap 100]" } },
 	{ RATE, .u.n = {"[:ra %d]", 7, 0, 9, 150, 25, NULL } },
 	{ PITCH, .u.n = {"[:dv ap %d]", 100, 0, 100, 0, 0, NULL } },
+	{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
 	{ VOL, .u.n = {"[:dv gv %d]", 13, 0, 16, 0, 5, NULL } },
 	{ PUNCT, .u.n = {"[:pu %c]", 0, 0, 2, 0, 0, "nsa" } },
 	{ VOICE, .u.n = {"[:n%c]", 0, 0, 9, 0, 0, "phfdburwkv" } },
@@ -59,6 +60,8 @@ static struct kobj_attribute caps_stop_attribute =
 	__ATTR(caps_stop, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute pitch_attribute =
 	__ATTR(pitch, 0644, spk_var_show, spk_var_store);
+static struct kobj_attribute inflection_attribute =
+	__ATTR(inflection, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute punct_attribute =
 	__ATTR(punct, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute rate_attribute =
@@ -87,6 +90,7 @@ static struct attribute *synth_attrs[] = {
 	&caps_start_attribute.attr,
 	&caps_stop_attribute.attr,
 	&pitch_attribute.attr,
+	&inflection_attribute.attr,
 	&punct_attribute.attr,
 	&rate_attribute.attr,
 	&voice_attribute.attr,
diff --git a/drivers/staging/speakup/speakup_decpc.c b/drivers/staging/speakup/speakup_decpc.c
index 798c42dfa16c..96f24c848cc5 100644
--- a/drivers/staging/speakup/speakup_decpc.c
+++ b/drivers/staging/speakup/speakup_decpc.c
@@ -139,6 +139,7 @@ static struct var_t vars[] = {
 	{ CAPS_STOP, .u.s = {"[:dv ap 100]" } },
 	{ RATE, .u.n = {"[:ra %d]", 9, 0, 18, 150, 25, NULL } },
 	{ PITCH, .u.n = {"[:dv ap %d]", 80, 0, 100, 20, 0, NULL } },
+	{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
 	{ VOL, .u.n = {"[:vo se %d]", 5, 0, 9, 5, 10, NULL } },
 	{ PUNCT, .u.n = {"[:pu %c]", 0, 0, 2, 0, 0, "nsa" } },
 	{ VOICE, .u.n = {"[:n%c]", 0, 0, 9, 0, 0, "phfdburwkv" } },
@@ -155,6 +156,8 @@ static struct kobj_attribute caps_stop_attribute =
 	__ATTR(caps_stop, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute pitch_attribute =
 	__ATTR(pitch, 0644, spk_var_show, spk_var_store);
+static struct kobj_attribute inflection_attribute =
+	__ATTR(inflection, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute punct_attribute =
 	__ATTR(punct, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute rate_attribute =
@@ -183,6 +186,7 @@ static struct attribute *synth_attrs[] = {
 	&caps_start_attribute.attr,
 	&caps_stop_attribute.attr,
 	&pitch_attribute.attr,
+	&inflection_attribute.attr,
 	&punct_attribute.attr,
 	&rate_attribute.attr,
 	&voice_attribute.attr,
diff --git a/drivers/staging/speakup/speakup_dectlk.c b/drivers/staging/speakup/speakup_dectlk.c
index dccb4ea29d37..780214b5ca16 100644
--- a/drivers/staging/speakup/speakup_dectlk.c
+++ b/drivers/staging/speakup/speakup_dectlk.c
@@ -44,7 +44,7 @@ static struct var_t vars[] = {
 	{ CAPS_START, .u.s = {"[:dv ap 160] " } },
 	{ CAPS_STOP, .u.s = {"[:dv ap 100 ] " } },
 	{ RATE, .u.n = {"[:ra %d] ", 180, 75, 650, 0, 0, NULL } },
-	{ PITCH, .u.n = {"[:dv ap %d] ", 122, 50, 350, 0, 0, NULL } },
+	{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
 	{ VOL, .u.n = {"[:dv g5 %d] ", 86, 60, 86, 0, 0, NULL } },
 	{ PUNCT, .u.n = {"[:pu %c] ", 0, 0, 2, 0, 0, "nsa" } },
 	{ VOICE, .u.n = {"[:n%c] ", 0, 0, 9, 0, 0, "phfdburwkv" } },
@@ -61,6 +61,8 @@ static struct kobj_attribute caps_stop_attribute =
 	__ATTR(caps_stop, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute pitch_attribute =
 	__ATTR(pitch, 0644, spk_var_show, spk_var_store);
+static struct kobj_attribute inflection_attribute =
+	__ATTR(inflection, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute punct_attribute =
 	__ATTR(punct, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute rate_attribute =
@@ -89,6 +91,7 @@ static struct attribute *synth_attrs[] = {
 	&caps_start_attribute.attr,
 	&caps_stop_attribute.attr,
 	&pitch_attribute.attr,
+	&inflection_attribute.attr,
 	&punct_attribute.attr,
 	&rate_attribute.attr,
 	&voice_attribute.attr,
diff --git a/drivers/staging/speakup/speakup_dummy.c b/drivers/staging/speakup/speakup_dummy.c
index 7df1a84297f6..e393438af81b 100644
--- a/drivers/staging/speakup/speakup_dummy.c
+++ b/drivers/staging/speakup/speakup_dummy.c
@@ -24,6 +24,7 @@ static struct var_t vars[] = {
 	{ PAUSE, .u.s = {"PAUSE\n"} },
 	{ RATE, .u.n = {"RATE %d\n", 8, 1, 16, 0, 0, NULL } },
 	{ PITCH, .u.n = {"PITCH %d\n", 8, 0, 16, 0, 0, NULL } },
+	{ INFLECTION, .u.n = {"INFLECTION %d\n", 8, 0, 16, 0, 0, NULL } },
 	{ VOL, .u.n = {"VOL %d\n", 8, 0, 16, 0, 0, NULL } },
 	{ TONE, .u.n = {"TONE %d\n", 8, 0, 16, 0, 0, NULL } },
 	{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
@@ -39,6 +40,8 @@ static struct kobj_attribute caps_stop_attribute =
 	__ATTR(caps_stop, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute pitch_attribute =
 	__ATTR(pitch, 0644, spk_var_show, spk_var_store);
+static struct kobj_attribute inflection_attribute =
+	__ATTR(inflection, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute rate_attribute =
 	__ATTR(rate, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute tone_attribute =
@@ -65,6 +68,7 @@ static struct attribute *synth_attrs[] = {
 	&caps_start_attribute.attr,
 	&caps_stop_attribute.attr,
 	&pitch_attribute.attr,
+	&inflection_attribute.attr,
 	&rate_attribute.attr,
 	&tone_attribute.attr,
 	&vol_attribute.attr,
diff --git a/drivers/staging/speakup/speakup_soft.c b/drivers/staging/speakup/speakup_soft.c
index f591ec095582..9a7029539f35 100644
--- a/drivers/staging/speakup/speakup_soft.c
+++ b/drivers/staging/speakup/speakup_soft.c
@@ -38,6 +38,7 @@ static struct var_t vars[] = {
 	{ PAUSE, .u.n = {"\x01P" } },
 	{ RATE, .u.n = {"\x01%ds", 2, 0, 9, 0, 0, NULL } },
 	{ PITCH, .u.n = {"\x01%dp", 5, 0, 9, 0, 0, NULL } },
+	{ INFLECTION, .u.n = {"\x01%dr", 5, 0, 9, 0, 0, NULL } },
 	{ VOL, .u.n = {"\x01%dv", 5, 0, 9, 0, 0, NULL } },
 	{ TONE, .u.n = {"\x01%dx", 1, 0, 2, 0, 0, NULL } },
 	{ PUNCT, .u.n = {"\x01%db", 0, 0, 2, 0, 0, NULL } },
@@ -57,6 +58,8 @@ static struct kobj_attribute freq_attribute =
 	__ATTR(freq, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute pitch_attribute =
 	__ATTR(pitch, 0644, spk_var_show, spk_var_store);
+static struct kobj_attribute inflection_attribute =
+	__ATTR(inflection, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute punct_attribute =
 	__ATTR(punct, 0644, spk_var_show, spk_var_store);
 static struct kobj_attribute rate_attribute =
@@ -96,6 +99,7 @@ static struct attribute *synth_attrs[] = {
 	&freq_attribute.attr,
 /*	&lang_attribute.attr, */
 	&pitch_attribute.attr,
+	&inflection_attribute.attr,
 	&punct_attribute.attr,
 	&rate_attribute.attr,
 	&tone_attribute.attr,
diff --git a/drivers/staging/speakup/spk_types.h b/drivers/staging/speakup/spk_types.h
index fc6a9416829c..d3272c6d199a 100644
--- a/drivers/staging/speakup/spk_types.h
+++ b/drivers/staging/speakup/spk_types.h
@@ -42,7 +42,8 @@ enum var_id_t {
 	SAY_CONTROL, SAY_WORD_CTL, NO_INTERRUPT, KEY_ECHO,
 	SPELL_DELAY, PUNC_LEVEL, READING_PUNC,
 	ATTRIB_BLEEP, BLEEPS,
-	RATE, PITCH, VOL, TONE, PUNCT, VOICE, FREQUENCY, LANG, DIRECT, PAUSE,
+	RATE, PITCH, INFLECTION, VOL, TONE, PUNCT, VOICE, FREQUENCY, LANG,
+	DIRECT, PAUSE,
 	CAPS_START, CAPS_STOP, CHARTAB,
 	MAXVARS
 };
diff --git a/drivers/staging/speakup/spkguide.txt b/drivers/staging/speakup/spkguide.txt
index c23549c54c3c..1e622cd34363 100644
--- a/drivers/staging/speakup/spkguide.txt
+++ b/drivers/staging/speakup/spkguide.txt
@@ -406,6 +406,7 @@ freq
 full_time
 jiffy_delta
 pitch
+inflection
 punct
 rate
 tone
@@ -518,9 +519,9 @@ All the entries in the Speakup sys system are readable, some are
 writable by root only, and some are writable by everyone.  Unless you
 know what you are doing, you should probably leave the ones that are
 writable by root only alone.  Most of the names are self explanatory.
-Vol for controlling volume, pitch for pitch, rate for controlling speaking
-rate, etc.  If you find one you aren't sure about, you can post a query
-on the Speakup list.
+Vol for controlling volume, pitch for pitch, inflection for pitch range, rate
+for controlling speaking rate, etc.  If you find one you aren't sure about, you
+can post a query on the Speakup list.
 
 6.  Changing Synthesizers
 
diff --git a/drivers/staging/speakup/sysfs-driver-speakup b/drivers/staging/speakup/sysfs-driver-speakup
index be3f5d6962e9..c6a32c434ce9 100644
--- a/drivers/staging/speakup/sysfs-driver-speakup
+++ b/drivers/staging/speakup/sysfs-driver-speakup
@@ -325,6 +325,12 @@ KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Gets or sets the pitch of the synthesizer. The range is 0-9.
 
+What:		/sys/accessibility/speakup/soft/inflection
+KernelVersion:	5.8
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the inflection of the synthesizer, i.e. the pitch
+		range. The range is 0-9.
+
 What:		/sys/accessibility/speakup/soft/punct
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
diff --git a/drivers/staging/speakup/varhandlers.c b/drivers/staging/speakup/varhandlers.c
index 5741d1cb6227..d7f6bec7ff06 100644
--- a/drivers/staging/speakup/varhandlers.c
+++ b/drivers/staging/speakup/varhandlers.c
@@ -37,6 +37,7 @@ static struct st_var_header var_headers[] = {
 	{ "bell_pos", BELL_POS, VAR_NUM, &spk_bell_pos, NULL },
 	{ "rate", RATE, VAR_NUM, NULL, NULL },
 	{ "pitch", PITCH, VAR_NUM, NULL, NULL },
+	{ "inflection", INFLECTION, VAR_NUM, NULL, NULL },
 	{ "vol", VOL, VAR_NUM, NULL, NULL },
 	{ "tone", TONE, VAR_NUM, NULL, NULL },
 	{ "punct", PUNCT, VAR_NUM, NULL, NULL   },
diff --git a/drivers/staging/unisys/visorhba/visorhba_main.c b/drivers/staging/unisys/visorhba/visorhba_main.c
index dd979ee4dcf1..99c57ceeb357 100644
--- a/drivers/staging/unisys/visorhba/visorhba_main.c
+++ b/drivers/staging/unisys/visorhba/visorhba_main.c
@@ -292,7 +292,7 @@ static void cleanup_scsitaskmgmt_handles(struct idr *idrtable,
  * @tasktype: Type of taskmgmt command
  * @scsidev:  Scsidev that issued command
  *
- * Create a cmdrsp packet and send it to the Serivce Partition
+ * Create a cmdrsp packet and send it to the Service Partition
  * that will service this request.
  *
  * Return: Int representing whether command was queued successfully or not
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index 33485184a98a..f783b632141b 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -233,7 +233,7 @@ static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream)
 }
 
 static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream,
-	struct snd_pcm_indirect *rec, size_t bytes)
+				     struct snd_pcm_indirect *rec, size_t bytes)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct bcm2835_alsa_stream *alsa_stream = runtime->private_data;
@@ -346,7 +346,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name,
 			&snd_bcm2835_playback_ops);
 
 	snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV,
-		chip->card->dev, 128 * 1024, 128 * 1024);
+				       chip->card->dev, 128 * 1024, 128 * 1024);
 
 	if (spdif)
 		chip->pcm_spdif = pcm;
diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
index 597acef35d0b..6d554d49fd3f 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
@@ -369,8 +369,7 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
 
 	if (dev->capture.vc_start_timestamp != -1 && pts) {
 		ktime_t timestamp;
-		s64 runtime_us = pts -
-		    dev->capture.vc_start_timestamp;
+		s64 runtime_us = pts - dev->capture.vc_start_timestamp;
 		timestamp = ktime_add_us(dev->capture.kernel_start_ts,
 					 runtime_us);
 		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
@@ -420,9 +419,8 @@ static int enable_camera(struct bm2835_mmal_dev *dev)
 			return -EINVAL;
 		}
 
-		ret = vchiq_mmal_component_enable(
-				dev->instance,
-				dev->component[COMP_CAMERA]);
+		ret = vchiq_mmal_component_enable(dev->instance,
+						  dev->component[COMP_CAMERA]);
 		if (ret < 0) {
 			v4l2_err(&dev->v4l2_dev,
 				 "Failed enabling camera, ret %d\n", ret);
@@ -451,10 +449,8 @@ static int disable_camera(struct bm2835_mmal_dev *dev)
 
 		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
 			 "Disabling camera\n");
-		ret =
-		    vchiq_mmal_component_disable(
-				dev->instance,
-				dev->component[COMP_CAMERA]);
+		ret = vchiq_mmal_component_disable(dev->instance,
+						   dev->component[COMP_CAMERA]);
 		if (ret < 0) {
 			v4l2_err(&dev->v4l2_dev,
 				 "Failed disabling camera, ret %d\n", ret);
@@ -555,8 +551,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	/* enable the camera port */
 	dev->capture.port->cb_ctx = dev;
-	ret =
-	    vchiq_mmal_port_enable(dev->instance, dev->capture.port, buffer_cb);
+	ret = vchiq_mmal_port_enable(dev->instance, dev->capture.port,
+				     buffer_cb);
 	if (ret) {
 		v4l2_err(&dev->v4l2_dev,
 			 "Failed to enable capture port - error %d. Disabling camera port again\n",
@@ -668,7 +664,7 @@ static int set_overlay_params(struct bm2835_mmal_dev *dev,
 			MMAL_DISPLAY_SET_ALPHA |
 			MMAL_DISPLAY_SET_DEST_RECT |
 			MMAL_DISPLAY_SET_FULLSCREEN,
-		.layer = PREVIEW_LAYER,
+		.layer = 2,
 		.alpha = dev->overlay.global_alpha,
 		.fullscreen = 0,
 		.dest_rect = {
@@ -767,16 +763,14 @@ static int vidioc_overlay(struct file *file, void *f, unsigned int on)
 	    (!on && !dev->component[COMP_PREVIEW]->enabled))
 		return 0;	/* already in requested state */
 
-	src =
-	    &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW];
+	src = &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW];
 
 	if (!on) {
 		/* disconnect preview ports and disable component */
 		ret = vchiq_mmal_port_disable(dev->instance, src);
 		if (!ret)
-			ret =
-			    vchiq_mmal_port_connect_tunnel(dev->instance, src,
-							   NULL);
+			ret = vchiq_mmal_port_connect_tunnel(dev->instance, src,
+							     NULL);
 		if (ret >= 0)
 			ret = vchiq_mmal_component_disable(
 					dev->instance,
@@ -800,9 +794,8 @@ static int vidioc_overlay(struct file *file, void *f, unsigned int on)
 	if (enable_camera(dev) < 0)
 		return -EINVAL;
 
-	ret = vchiq_mmal_component_enable(
-			dev->instance,
-			dev->component[COMP_PREVIEW]);
+	ret = vchiq_mmal_component_enable(dev->instance,
+					  dev->component[COMP_PREVIEW]);
 	if (ret < 0)
 		return ret;
 
@@ -1001,6 +994,141 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
+
+static int mmal_setup_video_component(struct bm2835_mmal_dev *dev,
+				      struct v4l2_format *f)
+{
+	bool overlay_enabled = !!dev->component[COMP_PREVIEW]->enabled;
+	struct vchiq_mmal_port *preview_port;
+	int ret;
+
+	preview_port = &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW];
+
+	/* Preview and encode ports need to match on resolution */
+	if (overlay_enabled) {
+		/* Need to disable the overlay before we can update
+		 * the resolution
+		 */
+		ret = vchiq_mmal_port_disable(dev->instance, preview_port);
+		if (!ret) {
+			ret = vchiq_mmal_port_connect_tunnel(dev->instance,
+							     preview_port,
+							     NULL);
+		}
+	}
+	preview_port->es.video.width = f->fmt.pix.width;
+	preview_port->es.video.height = f->fmt.pix.height;
+	preview_port->es.video.crop.x = 0;
+	preview_port->es.video.crop.y = 0;
+	preview_port->es.video.crop.width = f->fmt.pix.width;
+	preview_port->es.video.crop.height = f->fmt.pix.height;
+	preview_port->es.video.frame_rate.num =
+				  dev->capture.timeperframe.denominator;
+	preview_port->es.video.frame_rate.den =
+				  dev->capture.timeperframe.numerator;
+	ret = vchiq_mmal_port_set_format(dev->instance, preview_port);
+
+	if (overlay_enabled) {
+		ret = vchiq_mmal_port_connect_tunnel(dev->instance,
+				preview_port,
+				&dev->component[COMP_PREVIEW]->input[0]);
+		if (ret)
+			return ret;
+
+		ret = vchiq_mmal_port_enable(dev->instance, preview_port, NULL);
+	}
+
+	return ret;
+}
+
+static int mmal_setup_encode_component(struct bm2835_mmal_dev *dev,
+				       struct v4l2_format *f,
+				       struct vchiq_mmal_port *port,
+				       struct vchiq_mmal_port *camera_port,
+				       struct vchiq_mmal_component *component)
+{
+	struct mmal_fmt *mfmt = get_format(f);
+	int ret;
+
+	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+		 "vid_cap - set up encode comp\n");
+
+	/* configure buffering */
+	camera_port->current_buffer.size = camera_port->recommended_buffer.size;
+	camera_port->current_buffer.num = camera_port->recommended_buffer.num;
+
+	ret = vchiq_mmal_port_connect_tunnel(dev->instance, camera_port,
+					     &component->input[0]);
+	if (ret) {
+		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+			 "%s failed to create connection\n", __func__);
+		/* ensure capture is not going to be tried */
+		dev->capture.port = NULL;
+		return ret;
+	}
+
+	port->es.video.width = f->fmt.pix.width;
+	port->es.video.height = f->fmt.pix.height;
+	port->es.video.crop.x = 0;
+	port->es.video.crop.y = 0;
+	port->es.video.crop.width = f->fmt.pix.width;
+	port->es.video.crop.height = f->fmt.pix.height;
+	port->es.video.frame_rate.num =
+		  dev->capture.timeperframe.denominator;
+	port->es.video.frame_rate.den =
+		  dev->capture.timeperframe.numerator;
+
+	port->format.encoding = mfmt->mmal;
+	port->format.encoding_variant = 0;
+	/* Set any encoding specific parameters */
+	switch (mfmt->mmal_component) {
+	case COMP_VIDEO_ENCODE:
+		port->format.bitrate = dev->capture.encode_bitrate;
+		break;
+	case COMP_IMAGE_ENCODE:
+		/* Could set EXIF parameters here */
+		break;
+	default:
+		break;
+	}
+
+	ret = vchiq_mmal_port_set_format(dev->instance, port);
+	if (ret) {
+		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+			 "%s failed to set format %dx%d fmt %08X\n",
+			 __func__,
+			 f->fmt.pix.width,
+			 f->fmt.pix.height,
+			 f->fmt.pix.pixelformat);
+		return ret;
+	}
+
+	ret = vchiq_mmal_component_enable(dev->instance, component);
+	if (ret) {
+		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+			 "%s Failed to enable encode components\n", __func__);
+		return ret;
+	}
+
+	/* configure buffering */
+	port->current_buffer.num = 1;
+	port->current_buffer.size = f->fmt.pix.sizeimage;
+	if (port->format.encoding == MMAL_ENCODING_JPEG) {
+		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+			 "JPG - buf size now %d was %d\n",
+			 f->fmt.pix.sizeimage,
+			 port->current_buffer.size);
+		port->current_buffer.size =
+		    (f->fmt.pix.sizeimage < (100 << 10)) ?
+		    (100 << 10) : f->fmt.pix.sizeimage;
+	}
+	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+		 "vid_cap - cur_buf.size set to %d\n", f->fmt.pix.sizeimage);
+	port->current_buffer.alignment = 0;
+
+	return 0;
+}
+
 static int mmal_setup_components(struct bm2835_mmal_dev *dev,
 				 struct v4l2_format *f)
 {
@@ -1075,8 +1203,7 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
 	}
 
 	remove_padding = mfmt->remove_padding;
-	vchiq_mmal_port_parameter_set(dev->instance,
-				      camera_port,
+	vchiq_mmal_port_parameter_set(dev->instance, camera_port,
 				      MMAL_PARAMETER_NO_IMAGE_PADDING,
 				      &remove_padding, sizeof(remove_padding));
 
@@ -1096,46 +1223,7 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
 	if (!ret &&
 	    camera_port ==
 	    &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]) {
-		bool overlay_enabled =
-		    !!dev->component[COMP_PREVIEW]->enabled;
-		struct vchiq_mmal_port *preview_port =
-		    &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW];
-		/* Preview and encode ports need to match on resolution */
-		if (overlay_enabled) {
-			/* Need to disable the overlay before we can update
-			 * the resolution
-			 */
-			ret =
-			    vchiq_mmal_port_disable(dev->instance,
-						    preview_port);
-			if (!ret)
-				ret =
-				    vchiq_mmal_port_connect_tunnel(
-						dev->instance,
-						preview_port,
-						NULL);
-		}
-		preview_port->es.video.width = f->fmt.pix.width;
-		preview_port->es.video.height = f->fmt.pix.height;
-		preview_port->es.video.crop.x = 0;
-		preview_port->es.video.crop.y = 0;
-		preview_port->es.video.crop.width = f->fmt.pix.width;
-		preview_port->es.video.crop.height = f->fmt.pix.height;
-		preview_port->es.video.frame_rate.num =
-					  dev->capture.timeperframe.denominator;
-		preview_port->es.video.frame_rate.den =
-					  dev->capture.timeperframe.numerator;
-		ret = vchiq_mmal_port_set_format(dev->instance, preview_port);
-		if (overlay_enabled) {
-			ret = vchiq_mmal_port_connect_tunnel(
-				dev->instance,
-				preview_port,
-				&dev->component[COMP_PREVIEW]->input[0]);
-			if (!ret)
-				ret = vchiq_mmal_port_enable(dev->instance,
-							     preview_port,
-							     NULL);
-		}
+		ret = mmal_setup_video_component(dev, f);
 	}
 
 	if (ret) {
@@ -1145,128 +1233,39 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
 			 f->fmt.pix.pixelformat);
 		/* ensure capture is not going to be tried */
 		dev->capture.port = NULL;
-	} else {
-		if (encode_component) {
-			v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
-				 "vid_cap - set up encode comp\n");
+		return ret;
+	}
 
-			/* configure buffering */
-			camera_port->current_buffer.size =
-			    camera_port->recommended_buffer.size;
-			camera_port->current_buffer.num =
-			    camera_port->recommended_buffer.num;
+	if (encode_component) {
+		ret = mmal_setup_encode_component(dev, f, port,
+						  camera_port,
+						  encode_component);
 
-			ret =
-			    vchiq_mmal_port_connect_tunnel(
-					dev->instance,
-					camera_port,
-					&encode_component->input[0]);
-			if (ret) {
-				v4l2_dbg(1, bcm2835_v4l2_debug,
-					 &dev->v4l2_dev,
-					 "%s failed to create connection\n",
-					 __func__);
-				/* ensure capture is not going to be tried */
-				dev->capture.port = NULL;
-			} else {
-				port->es.video.width = f->fmt.pix.width;
-				port->es.video.height = f->fmt.pix.height;
-				port->es.video.crop.x = 0;
-				port->es.video.crop.y = 0;
-				port->es.video.crop.width = f->fmt.pix.width;
-				port->es.video.crop.height = f->fmt.pix.height;
-				port->es.video.frame_rate.num =
-					  dev->capture.timeperframe.denominator;
-				port->es.video.frame_rate.den =
-					  dev->capture.timeperframe.numerator;
-
-				port->format.encoding = mfmt->mmal;
-				port->format.encoding_variant = 0;
-				/* Set any encoding specific parameters */
-				switch (mfmt->mmal_component) {
-				case COMP_VIDEO_ENCODE:
-					port->format.bitrate =
-					    dev->capture.encode_bitrate;
-					break;
-				case COMP_IMAGE_ENCODE:
-					/* Could set EXIF parameters here */
-					break;
-				default:
-					break;
-				}
-				ret = vchiq_mmal_port_set_format(dev->instance,
-								 port);
-				if (ret)
-					v4l2_dbg(1, bcm2835_v4l2_debug,
-						 &dev->v4l2_dev,
-						 "%s failed to set format %dx%d fmt %08X\n",
-						 __func__,
-						 f->fmt.pix.width,
-						 f->fmt.pix.height,
-						 f->fmt.pix.pixelformat
-						 );
-			}
+		if (ret)
+			return ret;
+	} else {
+		/* configure buffering */
+		camera_port->current_buffer.num = 1;
+		camera_port->current_buffer.size = f->fmt.pix.sizeimage;
+		camera_port->current_buffer.alignment = 0;
+	}
 
-			if (!ret) {
-				ret = vchiq_mmal_component_enable(
-						dev->instance,
-						encode_component);
-				if (ret) {
-					v4l2_dbg(1, bcm2835_v4l2_debug,
-						 &dev->v4l2_dev,
-						 "%s Failed to enable encode components\n",
-						 __func__);
-				}
-			}
-			if (!ret) {
-				/* configure buffering */
-				port->current_buffer.num = 1;
-				port->current_buffer.size =
-				    f->fmt.pix.sizeimage;
-				if (port->format.encoding ==
-				    MMAL_ENCODING_JPEG) {
-					v4l2_dbg(1, bcm2835_v4l2_debug,
-						 &dev->v4l2_dev,
-						 "JPG - buf size now %d was %d\n",
-						 f->fmt.pix.sizeimage,
-						 port->current_buffer.size);
-					port->current_buffer.size =
-					    (f->fmt.pix.sizeimage <
-					     (100 << 10)) ?
-					    (100 << 10) : f->fmt.pix.sizeimage;
-				}
-				v4l2_dbg(1, bcm2835_v4l2_debug,
-					 &dev->v4l2_dev,
-					 "vid_cap - cur_buf.size set to %d\n",
-					 f->fmt.pix.sizeimage);
-				port->current_buffer.alignment = 0;
-			}
-		} else {
-			/* configure buffering */
-			camera_port->current_buffer.num = 1;
-			camera_port->current_buffer.size = f->fmt.pix.sizeimage;
-			camera_port->current_buffer.alignment = 0;
-		}
+	dev->capture.fmt = mfmt;
+	dev->capture.stride = f->fmt.pix.bytesperline;
+	dev->capture.width = camera_port->es.video.crop.width;
+	dev->capture.height = camera_port->es.video.crop.height;
+	dev->capture.buffersize = port->current_buffer.size;
 
-		if (!ret) {
-			dev->capture.fmt = mfmt;
-			dev->capture.stride = f->fmt.pix.bytesperline;
-			dev->capture.width = camera_port->es.video.crop.width;
-			dev->capture.height = camera_port->es.video.crop.height;
-			dev->capture.buffersize = port->current_buffer.size;
-
-			/* select port for capture */
-			dev->capture.port = port;
-			dev->capture.camera_port = camera_port;
-			dev->capture.encode_component = encode_component;
-			v4l2_dbg(1, bcm2835_v4l2_debug,
-				 &dev->v4l2_dev,
-				"Set dev->capture.fmt %08X, %dx%d, stride %d, size %d",
-				port->format.encoding,
-				dev->capture.width, dev->capture.height,
-				dev->capture.stride, dev->capture.buffersize);
-		}
-	}
+	/* select port for capture */
+	dev->capture.port = port;
+	dev->capture.camera_port = camera_port;
+	dev->capture.encode_component = encode_component;
+	v4l2_dbg(1, bcm2835_v4l2_debug,
+		 &dev->v4l2_dev,
+		"Set dev->capture.fmt %08X, %dx%d, stride %d, size %d",
+		port->format.encoding,
+		dev->capture.width, dev->capture.height,
+		dev->capture.stride, dev->capture.buffersize);
 
 	/* todo: Need to convert the vchiq/mmal error into a v4l2 error. */
 	return ret;
@@ -1658,9 +1657,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
 	dev->capture.enc_level = V4L2_MPEG_VIDEO_H264_LEVEL_4_0;
 
 	/* get the preview component ready */
-	ret = vchiq_mmal_component_init(
-			dev->instance, "ril.video_render",
-			&dev->component[COMP_PREVIEW]);
+	ret = vchiq_mmal_component_init(dev->instance, "ril.video_render",
+					&dev->component[COMP_PREVIEW]);
 	if (ret < 0)
 		goto unreg_camera;
 
@@ -1672,9 +1670,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
 	}
 
 	/* get the image encoder component ready */
-	ret = vchiq_mmal_component_init(
-		dev->instance, "ril.image_encode",
-		&dev->component[COMP_IMAGE_ENCODE]);
+	ret = vchiq_mmal_component_init(dev->instance, "ril.image_encode",
+					&dev->component[COMP_IMAGE_ENCODE]);
 	if (ret < 0)
 		goto unreg_preview;
 
@@ -1734,15 +1731,13 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
 
 unreg_vid_encoder:
 	pr_err("Cleanup: Destroy video encoder\n");
-	vchiq_mmal_component_finalise(
-		dev->instance,
-		dev->component[COMP_VIDEO_ENCODE]);
+	vchiq_mmal_component_finalise(dev->instance,
+				      dev->component[COMP_VIDEO_ENCODE]);
 
 unreg_image_encoder:
 	pr_err("Cleanup: Destroy image encoder\n");
-	vchiq_mmal_component_finalise(
-		dev->instance,
-		dev->component[COMP_IMAGE_ENCODE]);
+	vchiq_mmal_component_finalise(dev->instance,
+				      dev->component[COMP_IMAGE_ENCODE]);
 
 unreg_preview:
 	pr_err("Cleanup: Destroy video render\n");
@@ -1775,8 +1770,7 @@ static int bm2835_mmal_init_device(struct bm2835_mmal_dev *dev,
 	/* video device needs to be able to access instance data */
 	video_set_drvdata(vfd, dev);
 
-	ret = video_register_device(vfd,
-				    VFL_TYPE_VIDEO,
+	ret = video_register_device(vfd, VFL_TYPE_VIDEO,
 				    video_nr[dev->camera_num]);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h
index b5fce38de038..75524adff0f5 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h
@@ -30,79 +30,77 @@ enum {
 	CAM_PORT_COUNT
 };
 
-#define PREVIEW_LAYER      2
-
 extern int bcm2835_v4l2_debug;
 
 struct bm2835_mmal_dev {
 	/* v4l2 devices */
-	struct v4l2_device     v4l2_dev;
-	struct video_device    vdev;
-	struct mutex           mutex;
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct mutex mutex;
 
 	/* controls */
-	struct v4l2_ctrl_handler  ctrl_handler;
-	struct v4l2_ctrl          *ctrls[V4L2_CTRL_COUNT];
-	enum v4l2_scene_mode	  scene_mode;
-	struct mmal_colourfx      colourfx;
-	int                       hflip;
-	int                       vflip;
-	int			  red_gain;
-	int			  blue_gain;
+	struct v4l2_ctrl_handler ctrl_handler;
+	struct v4l2_ctrl *ctrls[V4L2_CTRL_COUNT];
+	enum v4l2_scene_mode scene_mode;
+	struct mmal_colourfx colourfx;
+	int hflip;
+	int vflip;
+	int red_gain;
+	int blue_gain;
 	enum mmal_parameter_exposuremode exposure_mode_user;
 	enum v4l2_exposure_auto_type exposure_mode_v4l2_user;
 	/* active exposure mode may differ if selected via a scene mode */
 	enum mmal_parameter_exposuremode exposure_mode_active;
 	enum mmal_parameter_exposuremeteringmode metering_mode;
-	unsigned int		  manual_shutter_speed;
-	bool			  exp_auto_priority;
+	unsigned int manual_shutter_speed;
+	bool exp_auto_priority;
 	bool manual_iso_enabled;
 	u32 iso;
 
 	/* allocated mmal instance and components */
-	struct vchiq_mmal_instance   *instance;
-	struct vchiq_mmal_component  *component[COMP_COUNT];
+	struct vchiq_mmal_instance *instance;
+	struct vchiq_mmal_component *component[COMP_COUNT];
 	int camera_use_count;
 
 	struct v4l2_window overlay;
 
 	struct {
-		unsigned int     width;  /* width */
-		unsigned int     height;  /* height */
-		unsigned int     stride;  /* stride */
-		unsigned int     buffersize; /* buffer size with padding */
-		struct mmal_fmt  *fmt;
+		unsigned int width;  /* width */
+		unsigned int height;  /* height */
+		unsigned int stride;  /* stride */
+		unsigned int buffersize; /* buffer size with padding */
+		struct mmal_fmt *fmt;
 		struct v4l2_fract timeperframe;
 
 		/* H264 encode bitrate */
-		int         encode_bitrate;
+		int encode_bitrate;
 		/* H264 bitrate mode. CBR/VBR */
-		int         encode_bitrate_mode;
+		int encode_bitrate_mode;
 		/* H264 profile */
 		enum v4l2_mpeg_video_h264_profile enc_profile;
 		/* H264 level */
 		enum v4l2_mpeg_video_h264_level enc_level;
 		/* JPEG Q-factor */
-		int         q_factor;
+		int q_factor;
 
-		struct vb2_queue	vb_vidq;
+		struct vb2_queue vb_vidq;
 
 		/* VC start timestamp for streaming */
-		s64         vc_start_timestamp;
+		s64 vc_start_timestamp;
 		/* Kernel start timestamp for streaming */
 		ktime_t kernel_start_ts;
 		/* Sequence number of last buffer */
-		u32		sequence;
+		u32 sequence;
 
-		struct vchiq_mmal_port  *port; /* port being used for capture */
+		struct vchiq_mmal_port *port; /* port being used for capture */
 		/* camera port being used for capture */
-		struct vchiq_mmal_port  *camera_port;
+		struct vchiq_mmal_port *camera_port;
 		/* component being used for encode */
 		struct vchiq_mmal_component *encode_component;
 		/* number of frames remaining which driver should capture */
-		unsigned int  frame_count;
+		unsigned int frame_count;
 		/* last frame completion */
-		struct completion  frame_cmplt;
+		struct completion frame_cmplt;
 
 	} capture;
 
diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
index 5137fcf203d6..b096a12387f7 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
@@ -135,8 +135,8 @@ static const struct v4l2_to_mmal_effects_setting
 };
 
 struct v4l2_mmal_scene_config {
-	enum v4l2_scene_mode			v4l2_scene;
-	enum mmal_parameter_exposuremode	exposure_mode;
+	enum v4l2_scene_mode v4l2_scene;
+	enum mmal_parameter_exposuremode exposure_mode;
 	enum mmal_parameter_exposuremeteringmode metering_mode;
 };
 
@@ -377,11 +377,9 @@ static int ctrl_set_metering_mode(struct bm2835_mmal_dev *dev,
 		dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT;
 		break;
 
-	/* todo matrix weighting not added to Linux API till 3.9
-	 * case V4L2_EXPOSURE_METERING_MATRIX:
-	 *	dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX;
-	 *	break;
-	 */
+	case V4L2_EXPOSURE_METERING_MATRIX:
+		dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX;
+		break;
 	}
 
 	if (dev->scene_mode == V4L2_SCENE_MODE_NONE) {
@@ -516,42 +514,41 @@ static int ctrl_set_image_effect(struct bm2835_mmal_dev *dev,
 	struct mmal_parameter_imagefx_parameters imagefx;
 
 	for (i = 0; i < ARRAY_SIZE(v4l2_to_mmal_effects_values); i++) {
-		if (ctrl->val == v4l2_to_mmal_effects_values[i].v4l2_effect) {
-			imagefx.effect =
-				v4l2_to_mmal_effects_values[i].mmal_effect;
-			imagefx.num_effect_params =
-				v4l2_to_mmal_effects_values[i].num_effect_params;
-
-			if (imagefx.num_effect_params > MMAL_MAX_IMAGEFX_PARAMETERS)
-				imagefx.num_effect_params = MMAL_MAX_IMAGEFX_PARAMETERS;
-
-			for (j = 0; j < imagefx.num_effect_params; j++)
-				imagefx.effect_parameter[j] =
-					v4l2_to_mmal_effects_values[i].effect_params[j];
-
-			dev->colourfx.enable =
-				v4l2_to_mmal_effects_values[i].col_fx_enable;
-			if (!v4l2_to_mmal_effects_values[i].col_fx_fixed_cbcr) {
-				dev->colourfx.u =
-					v4l2_to_mmal_effects_values[i].u;
-				dev->colourfx.v =
-					v4l2_to_mmal_effects_values[i].v;
-			}
+		if (ctrl->val != v4l2_to_mmal_effects_values[i].v4l2_effect)
+			continue;
+
+		imagefx.effect =
+			v4l2_to_mmal_effects_values[i].mmal_effect;
+		imagefx.num_effect_params =
+			v4l2_to_mmal_effects_values[i].num_effect_params;
 
-			control = &dev->component[COMP_CAMERA]->control;
+		if (imagefx.num_effect_params > MMAL_MAX_IMAGEFX_PARAMETERS)
+			imagefx.num_effect_params = MMAL_MAX_IMAGEFX_PARAMETERS;
 
-			ret = vchiq_mmal_port_parameter_set(
-					dev->instance, control,
-					MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS,
-					&imagefx, sizeof(imagefx));
-			if (ret)
-				goto exit;
+		for (j = 0; j < imagefx.num_effect_params; j++)
+			imagefx.effect_parameter[j] =
+				v4l2_to_mmal_effects_values[i].effect_params[j];
 
-			ret = vchiq_mmal_port_parameter_set(
-					dev->instance, control,
-					MMAL_PARAMETER_COLOUR_EFFECT,
-					&dev->colourfx, sizeof(dev->colourfx));
+		dev->colourfx.enable =
+			v4l2_to_mmal_effects_values[i].col_fx_enable;
+		if (!v4l2_to_mmal_effects_values[i].col_fx_fixed_cbcr) {
+			dev->colourfx.u = v4l2_to_mmal_effects_values[i].u;
+			dev->colourfx.v = v4l2_to_mmal_effects_values[i].v;
 		}
+
+		control = &dev->component[COMP_CAMERA]->control;
+
+		ret = vchiq_mmal_port_parameter_set(
+				dev->instance, control,
+				MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS,
+				&imagefx, sizeof(imagefx));
+		if (ret)
+			goto exit;
+
+		ret = vchiq_mmal_port_parameter_set(
+				dev->instance, control,
+				MMAL_PARAMETER_COLOUR_EFFECT,
+				&dev->colourfx, sizeof(dev->colourfx));
 	}
 
 exit:
@@ -841,8 +838,7 @@ static int ctrl_set_scene_mode(struct bm2835_mmal_dev *dev,
 		enum mmal_parameter_exposuremeteringmode metering_mode;
 
 		for (i = 0; i < ARRAY_SIZE(scene_configs); i++) {
-			if (scene_configs[i].v4l2_scene ==
-				ctrl->val) {
+			if (scene_configs[i].v4l2_scene == ctrl->val) {
 				scene = &scene_configs[i];
 				break;
 			}
@@ -1045,8 +1041,8 @@ static const struct bm2835_mmal_v4l2_ctrl v4l2_ctrls[V4L2_CTRL_COUNT] = {
 	{
 		.id = V4L2_CID_EXPOSURE_METERING,
 		.type = MMAL_CONTROL_TYPE_STD_MENU,
-		.min = ~0x7,
-		.max = V4L2_EXPOSURE_METERING_SPOT,
+		.min = ~0xf,
+		.max = V4L2_EXPOSURE_METERING_MATRIX,
 		.def = V4L2_EXPOSURE_METERING_AVERAGE,
 		.step = 0,
 		.imenu = NULL,
@@ -1282,21 +1278,18 @@ int set_framerate_params(struct bm2835_mmal_dev *dev)
 	struct mmal_parameter_fps_range fps_range;
 	int ret;
 
+	fps_range.fps_high.num = dev->capture.timeperframe.denominator;
+	fps_range.fps_high.den = dev->capture.timeperframe.numerator;
+
 	if ((dev->exposure_mode_active != MMAL_PARAM_EXPOSUREMODE_OFF) &&
 	    (dev->exp_auto_priority)) {
-		/* Variable FPS. Define min FPS as 1fps.
-		 * Max as max defined FPS.
-		 */
+		/* Variable FPS. Define min FPS as 1fps. */
 		fps_range.fps_low.num = 1;
 		fps_range.fps_low.den = 1;
-		fps_range.fps_high.num = dev->capture.timeperframe.denominator;
-		fps_range.fps_high.den = dev->capture.timeperframe.numerator;
 	} else {
 		/* Fixed FPS - set min and max to be the same */
-		fps_range.fps_low.num = fps_range.fps_high.num =
-			dev->capture.timeperframe.denominator;
-		fps_range.fps_low.den = fps_range.fps_high.den =
-			dev->capture.timeperframe.numerator;
+		fps_range.fps_low.num = fps_range.fps_high.num;
+		fps_range.fps_low.den = fps_range.fps_high.den;
 	}
 
 	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
diff --git a/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h b/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h
index ff5398737b4a..ce88fac7c24b 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h
+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h
@@ -26,13 +26,13 @@ struct mmal_msg_context;
 
 /* mapping between v4l and mmal video modes */
 struct mmal_fmt {
-	u32   fourcc;          /* v4l2 format id */
-	int   flags;           /* v4l2 flags field */
-	u32   mmal;
-	int   depth;
-	u32   mmal_component;  /* MMAL component index to be used to encode */
-	u32   ybbp;            /* depth of first Y plane for planar formats */
-	bool  remove_padding;  /* Does the GPU have to remove padding,
+	u32 fourcc;          /* v4l2 format id */
+	int flags;           /* v4l2 flags field */
+	u32 mmal;
+	int depth;
+	u32 mmal_component;  /* MMAL component index to be used to encode */
+	u32 ybbp;            /* depth of first Y plane for planar formats */
+	bool remove_padding;   /* Does the GPU have to remove padding,
 				* or can we do hide padding via bytesperline.
 				*/
 };
@@ -40,10 +40,10 @@ struct mmal_fmt {
 /* buffer for one video frame */
 struct mmal_buffer {
 	/* v4l buffer data -- must be first */
-	struct vb2_v4l2_buffer	vb;
+	struct vb2_v4l2_buffer vb;
 
 	/* list of buffers available */
-	struct list_head	list;
+	struct list_head list;
 
 	void *buffer; /* buffer pointer */
 	unsigned long buffer_size; /* size of allocated buffer */
diff --git a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h
index 80a99128f5f3..f4ac5a6149ea 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h
+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h
@@ -724,11 +724,11 @@ struct mmal_parameter_imagefx_parameters {
 #define MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN 16
 
 struct mmal_parameter_camera_info_camera_t {
-	u32    port_id;
-	u32    max_width;
-	u32    max_height;
-	u32    lens_present;
-	u8     camera_name[MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN];
+	u32 port_id;
+	u32 max_width;
+	u32 max_height;
+	u32 lens_present;
+	u8 camera_name[MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN];
 };
 
 enum mmal_parameter_camera_info_flash_type_t {
@@ -744,8 +744,8 @@ struct mmal_parameter_camera_info_flash_t {
 };
 
 struct mmal_parameter_camera_info_t {
-	u32                            num_cameras;
-	u32                            num_flashes;
+	u32 num_cameras;
+	u32 num_flashes;
 	struct mmal_parameter_camera_info_camera_t
 				cameras[MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS];
 	struct mmal_parameter_camera_info_flash_t
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index a1ea9777a444..2d3e114f4a66 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -2353,7 +2353,7 @@ vchiq_use_internal(struct vchiq_state *state, struct vchiq_service *service,
 	enum vchiq_status ret = VCHIQ_SUCCESS;
 	char entity[16];
 	int *entity_uc;
-	int local_uc, local_entity_uc;
+	int local_uc;
 
 	if (!arm_state)
 		goto out;
@@ -2377,7 +2377,7 @@ vchiq_use_internal(struct vchiq_state *state, struct vchiq_service *service,
 
 	write_lock_bh(&arm_state->susp_res_lock);
 	local_uc = ++arm_state->videocore_use_count;
-	local_entity_uc = ++(*entity_uc);
+	++(*entity_uc);
 
 	vchiq_log_trace(vchiq_susp_log_level,
 		"%s %s count %d, state count %d",
diff --git a/drivers/staging/vt6655/baseband.c b/drivers/staging/vt6655/baseband.c
index b4cdc0b7fee7..6b25d75d2501 100644
--- a/drivers/staging/vt6655/baseband.c
+++ b/drivers/staging/vt6655/baseband.c
@@ -12,12 +12,10 @@
  * Date: Aug.22, 2002
  *
  * Functions:
- *      BBuGetFrameTime        - Calculate data frame transmitting time
- *      BBvCalculateParameter   - Calculate PhyLength, PhyService and Phy Signal
- *                               parameter for baseband Tx
- *      BBbReadEmbedded         - Embedded read baseband register via MAC
- *      BBbWriteEmbedded        - Embedded write baseband register via MAC
- *      BBbVT3253Init          - VIA VT3253 baseband chip init code
+ *      bb_get_frame_time	 - Calculate data frame transmitting time
+ *      bb_read_embedded	 - Embedded read baseband register via MAC
+ *      bb_write_embedded	 - Embedded write baseband register via MAC
+ *      bb_vt3253_init		 - VIA VT3253 baseband chip init code
  *
  * Revision History:
  *      06-10-2003 Bryan YC Fan:  Re-write codes to support VT3253 spec.
@@ -1695,53 +1693,53 @@ static const unsigned short awcFrameTime[MAX_RATE] = {
  *
  * Parameters:
  *  In:
- *      byPreambleType  - Preamble Type
- *      byPktType        - PK_TYPE_11A, PK_TYPE_11B, PK_TYPE_11GB, PK_TYPE_11GA
- *      cbFrameLength   - Baseband Type
- *      wRate           - Tx Rate
+ *      by_preamble_type  - Preamble Type
+ *      by_pkt_type        - PK_TYPE_11A, PK_TYPE_11B, PK_TYPE_11GB, PK_TYPE_11GA
+ *      cb_frame_length   - Baseband Type
+ *      tx_rate           - Tx Rate
  *  Out:
  *
  * Return Value: FrameTime
  *
  */
-unsigned int BBuGetFrameTime(unsigned char byPreambleType,
-			     unsigned char byPktType,
-			     unsigned int cbFrameLength, unsigned short wRate)
+unsigned int bb_get_frame_time(unsigned char by_preamble_type,
+			       unsigned char by_pkt_type,
+			       unsigned int cb_frame_length,
+			       unsigned short tx_rate)
 {
-	unsigned int uFrameTime;
-	unsigned int uPreamble;
-	unsigned int uTmp;
-	unsigned int uRateIdx = (unsigned int)wRate;
-	unsigned int uRate = 0;
+	unsigned int frame_time;
+	unsigned int preamble;
+	unsigned int tmp;
+	unsigned int rate_idx = (unsigned int)tx_rate;
+	unsigned int rate = 0;
 
-	if (uRateIdx > RATE_54M)
+	if (rate_idx > RATE_54M)
 		return 0;
 
-	uRate = (unsigned int)awcFrameTime[uRateIdx];
+	rate = (unsigned int)awcFrameTime[rate_idx];
 
-	if (uRateIdx <= 3) {          /* CCK mode */
-		if (byPreambleType == 1) /* Short */
-			uPreamble = 96;
+	if (rate_idx <= 3) {		    /* CCK mode */
+		if (by_preamble_type == 1) /* Short */
+			preamble = 96;
 		else
-			uPreamble = 192;
-
-		uFrameTime = (cbFrameLength * 80) / uRate;  /* ????? */
-		uTmp = (uFrameTime * uRate) / 80;
-		if (cbFrameLength != uTmp)
-			uFrameTime++;
+			preamble = 192;
+		frame_time = (cb_frame_length * 80) / rate;  /* ????? */
+		tmp = (frame_time * rate) / 80;
+		if (cb_frame_length != tmp)
+			frame_time++;
 
-		return uPreamble + uFrameTime;
+		return preamble + frame_time;
 	}
-	uFrameTime = (cbFrameLength * 8 + 22) / uRate; /* ???????? */
-	uTmp = ((uFrameTime * uRate) - 22) / 8;
-	if (cbFrameLength != uTmp)
-		uFrameTime++;
+	frame_time = (cb_frame_length * 8 + 22) / rate; /* ???????? */
+	tmp = ((frame_time * rate) - 22) / 8;
+	if (cb_frame_length != tmp)
+		frame_time++;
 
-	uFrameTime = uFrameTime * 4;    /* ??????? */
-	if (byPktType != PK_TYPE_11A)
-		uFrameTime += 6;     /* ?????? */
+	frame_time = frame_time * 4;    /* ??????? */
+	if (by_pkt_type != PK_TYPE_11A)
+		frame_time += 6;     /* ?????? */
 
-	return 20 + uFrameTime; /* ?????? */
+	return 20 + frame_time; /* ?????? */
 }
 
 /*
@@ -1899,34 +1897,34 @@ void vnt_get_phy_field(struct vnt_private *priv, u32 frame_length,
  * Parameters:
  *  In:
  *      iobase      - I/O base address
- *      byBBAddr    - address of register in Baseband
+ *      by_bb_addr  - address of register in Baseband
  *  Out:
- *      pbyData     - data read
+ *      pby_data    - data read
  *
  * Return Value: true if succeeded; false if failed.
  *
  */
-bool BBbReadEmbedded(struct vnt_private *priv,
-		     unsigned char byBBAddr, unsigned char *pbyData)
+bool bb_read_embedded(struct vnt_private *priv, unsigned char by_bb_addr,
+		      unsigned char *pby_data)
 {
 	void __iomem *iobase = priv->PortOffset;
 	unsigned short ww;
-	unsigned char byValue;
+	unsigned char by_value;
 
 	/* BB reg offset */
-	VNSvOutPortB(iobase + MAC_REG_BBREGADR, byBBAddr);
+	VNSvOutPortB(iobase + MAC_REG_BBREGADR, by_bb_addr);
 
 	/* turn on REGR */
 	MACvRegBitsOn(iobase, MAC_REG_BBREGCTL, BBREGCTL_REGR);
 	/* W_MAX_TIMEOUT is the timeout period */
 	for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
-		VNSvInPortB(iobase + MAC_REG_BBREGCTL, &byValue);
-		if (byValue & BBREGCTL_DONE)
+		VNSvInPortB(iobase + MAC_REG_BBREGCTL, &by_value);
+		if (by_value & BBREGCTL_DONE)
 			break;
 	}
 
 	/* get BB data */
-	VNSvInPortB(iobase + MAC_REG_BBREGDATA, pbyData);
+	VNSvInPortB(iobase + MAC_REG_BBREGDATA, pby_data);
 
 	if (ww == W_MAX_TIMEOUT) {
 		pr_debug(" DBG_PORT80(0x30)\n");
@@ -1941,32 +1939,32 @@ bool BBbReadEmbedded(struct vnt_private *priv,
  * Parameters:
  *  In:
  *      iobase      - I/O base address
- *      byBBAddr    - address of register in Baseband
- *      byData      - data to write
+ *      by_bb_addr  - address of register in Baseband
+ *      by_data     - data to write
  *  Out:
  *      none
  *
  * Return Value: true if succeeded; false if failed.
  *
  */
-bool BBbWriteEmbedded(struct vnt_private *priv,
-		      unsigned char byBBAddr, unsigned char byData)
+bool bb_write_embedded(struct vnt_private *priv, unsigned char by_bb_addr,
+		       unsigned char by_data)
 {
 	void __iomem *iobase = priv->PortOffset;
 	unsigned short ww;
-	unsigned char byValue;
+	unsigned char by_value;
 
 	/* BB reg offset */
-	VNSvOutPortB(iobase + MAC_REG_BBREGADR, byBBAddr);
+	VNSvOutPortB(iobase + MAC_REG_BBREGADR, by_bb_addr);
 	/* set BB data */
-	VNSvOutPortB(iobase + MAC_REG_BBREGDATA, byData);
+	VNSvOutPortB(iobase + MAC_REG_BBREGDATA, by_data);
 
 	/* turn on BBREGCTL_REGW */
 	MACvRegBitsOn(iobase, MAC_REG_BBREGCTL, BBREGCTL_REGW);
 	/* W_MAX_TIMEOUT is the timeout period */
 	for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
-		VNSvInPortB(iobase + MAC_REG_BBREGCTL, &byValue);
-		if (byValue & BBREGCTL_DONE)
+		VNSvInPortB(iobase + MAC_REG_BBREGCTL, &by_value);
+		if (by_value & BBREGCTL_DONE)
 			break;
 	}
 
@@ -1992,29 +1990,29 @@ bool BBbWriteEmbedded(struct vnt_private *priv,
  *
  */
 
-bool BBbVT3253Init(struct vnt_private *priv)
+bool bb_vt3253_init(struct vnt_private *priv)
 {
-	bool bResult = true;
+	bool result = true;
 	int        ii;
 	void __iomem *iobase = priv->PortOffset;
-	unsigned char byRFType = priv->byRFType;
-	unsigned char byLocalID = priv->byLocalID;
+	unsigned char by_rf_type = priv->byRFType;
+	unsigned char by_local_id = priv->byLocalID;
 
-	if (byRFType == RF_RFMD2959) {
-		if (byLocalID <= REV_ID_VT3253_A1) {
+	if (by_rf_type == RF_RFMD2959) {
+		if (by_local_id <= REV_ID_VT3253_A1) {
 			for (ii = 0; ii < CB_VT3253_INIT_FOR_RFMD; ii++)
-				bResult &= BBbWriteEmbedded(priv,
+				result &= bb_write_embedded(priv,
 					byVT3253InitTab_RFMD[ii][0],
 					byVT3253InitTab_RFMD[ii][1]);
 
 		} else {
 			for (ii = 0; ii < CB_VT3253B0_INIT_FOR_RFMD; ii++)
-				bResult &= BBbWriteEmbedded(priv,
+				result &= bb_write_embedded(priv,
 					byVT3253B0_RFMD[ii][0],
 					byVT3253B0_RFMD[ii][1]);
 
 			for (ii = 0; ii < CB_VT3253B0_AGC_FOR_RFMD2959; ii++)
-				bResult &= BBbWriteEmbedded(priv,
+				result &= bb_write_embedded(priv,
 					byVT3253B0_AGC4_RFMD2959[ii][0],
 					byVT3253B0_AGC4_RFMD2959[ii][1]);
 
@@ -2029,14 +2027,14 @@ bool BBbVT3253Init(struct vnt_private *priv)
 		priv->ldBmThreshold[1] = -50;
 		priv->ldBmThreshold[2] = 0;
 		priv->ldBmThreshold[3] = 0;
-	} else if ((byRFType == RF_AIROHA) || (byRFType == RF_AL2230S)) {
+	} else if ((by_rf_type == RF_AIROHA) || (by_rf_type == RF_AL2230S)) {
 		for (ii = 0; ii < CB_VT3253B0_INIT_FOR_AIROHA2230; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_AIROHA2230[ii][0],
 				byVT3253B0_AIROHA2230[ii][1]);
 
 		for (ii = 0; ii < CB_VT3253B0_AGC; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_AGC[ii][0], byVT3253B0_AGC[ii][1]);
 
 		priv->abyBBVGA[0] = 0x1C;
@@ -2047,14 +2045,14 @@ bool BBbVT3253Init(struct vnt_private *priv)
 		priv->ldBmThreshold[1] = -48;
 		priv->ldBmThreshold[2] = 0;
 		priv->ldBmThreshold[3] = 0;
-	} else if (byRFType == RF_UW2451) {
+	} else if (by_rf_type == RF_UW2451) {
 		for (ii = 0; ii < CB_VT3253B0_INIT_FOR_UW2451; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_UW2451[ii][0],
 				byVT3253B0_UW2451[ii][1]);
 
 		for (ii = 0; ii < CB_VT3253B0_AGC; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_AGC[ii][0],
 				byVT3253B0_AGC[ii][1]);
 
@@ -2069,9 +2067,9 @@ bool BBbVT3253Init(struct vnt_private *priv)
 		priv->ldBmThreshold[1] = -50;
 		priv->ldBmThreshold[2] = 0;
 		priv->ldBmThreshold[3] = 0;
-	} else if (byRFType == RF_UW2452) {
+	} else if (by_rf_type == RF_UW2452) {
 		for (ii = 0; ii < CB_VT3253B0_INIT_FOR_UW2451; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_UW2451[ii][0],
 				byVT3253B0_UW2451[ii][1]);
 
@@ -2080,7 +2078,7 @@ bool BBbVT3253Init(struct vnt_private *priv)
 		 * 0x45->0x41(VC1/VC2 define, make the ANT_A, ANT_B inverted)
 		 */
 
-		/*bResult &= BBbWriteEmbedded(iobase,0x09,0x41);*/
+		/*bResult &= bb_write_embedded(iobase,0x09,0x41);*/
 
 		/* Init ANT B select,
 		 * RX Config CR10 = 0x28->0x2A,
@@ -2088,23 +2086,23 @@ bool BBbVT3253Init(struct vnt_private *priv)
 		 * make the ANT_A, ANT_B inverted)
 		 */
 
-		/*bResult &= BBbWriteEmbedded(iobase,0x0a,0x28);*/
+		/*bResult &= bb_write_embedded(iobase,0x0a,0x28);*/
 		/* Select VC1/VC2, CR215 = 0x02->0x06 */
-		bResult &= BBbWriteEmbedded(priv, 0xd7, 0x06);
+		result &= bb_write_embedded(priv, 0xd7, 0x06);
 
 		/* {{RobertYu:20050125, request by Jack */
-		bResult &= BBbWriteEmbedded(priv, 0x90, 0x20);
-		bResult &= BBbWriteEmbedded(priv, 0x97, 0xeb);
+		result &= bb_write_embedded(priv, 0x90, 0x20);
+		result &= bb_write_embedded(priv, 0x97, 0xeb);
 		/* }} */
 
 		/* {{RobertYu:20050221, request by Jack */
-		bResult &= BBbWriteEmbedded(priv, 0xa6, 0x00);
-		bResult &= BBbWriteEmbedded(priv, 0xa8, 0x30);
+		result &= bb_write_embedded(priv, 0xa6, 0x00);
+		result &= bb_write_embedded(priv, 0xa8, 0x30);
 		/* }} */
-		bResult &= BBbWriteEmbedded(priv, 0xb0, 0x58);
+		result &= bb_write_embedded(priv, 0xb0, 0x58);
 
 		for (ii = 0; ii < CB_VT3253B0_AGC; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_AGC[ii][0], byVT3253B0_AGC[ii][1]);
 
 		priv->abyBBVGA[0] = 0x14;
@@ -2117,14 +2115,14 @@ bool BBbVT3253Init(struct vnt_private *priv)
 		priv->ldBmThreshold[3] = 0;
 		/* }} RobertYu */
 
-	} else if (byRFType == RF_VT3226) {
+	} else if (by_rf_type == RF_VT3226) {
 		for (ii = 0; ii < CB_VT3253B0_INIT_FOR_AIROHA2230; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_AIROHA2230[ii][0],
 				byVT3253B0_AIROHA2230[ii][1]);
 
 		for (ii = 0; ii < CB_VT3253B0_AGC; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_AGC[ii][0], byVT3253B0_AGC[ii][1]);
 
 		priv->abyBBVGA[0] = 0x1C;
@@ -2138,9 +2136,9 @@ bool BBbVT3253Init(struct vnt_private *priv)
 		/* Fix VT3226 DFC system timing issue */
 		MACvSetRFLE_LatchBase(iobase);
 		/* {{ RobertYu: 20050104 */
-	} else if (byRFType == RF_AIROHA7230) {
+	} else if (by_rf_type == RF_AIROHA7230) {
 		for (ii = 0; ii < CB_VT3253B0_INIT_FOR_AIROHA2230; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_AIROHA2230[ii][0],
 				byVT3253B0_AIROHA2230[ii][1]);
 
@@ -2148,17 +2146,17 @@ bool BBbVT3253Init(struct vnt_private *priv)
 		/* Init ANT B select,TX Config CR09 = 0x61->0x45,
 		 * 0x45->0x41(VC1/VC2 define, make the ANT_A, ANT_B inverted)
 		 */
-		/*bResult &= BBbWriteEmbedded(iobase,0x09,0x41);*/
+		/* bResult &= bb_write_embedded(iobase,0x09,0x41);*/
 		/* Init ANT B select,RX Config CR10 = 0x28->0x2A,
 		 * 0x2A->0x28(VC1/VC2 define, make the ANT_A, ANT_B inverted)
 		 */
-		/*bResult &= BBbWriteEmbedded(iobase,0x0a,0x28);*/
+		/* bResult &= BBbWriteEmbedded(iobase,0x0a,0x28);*/
 		/* Select VC1/VC2, CR215 = 0x02->0x06 */
-		bResult &= BBbWriteEmbedded(priv, 0xd7, 0x06);
+		result &= bb_write_embedded(priv, 0xd7, 0x06);
 		/* }} */
 
 		for (ii = 0; ii < CB_VT3253B0_AGC; ii++)
-			bResult &= BBbWriteEmbedded(priv,
+			result &= bb_write_embedded(priv,
 				byVT3253B0_AGC[ii][0], byVT3253B0_AGC[ii][1]);
 
 		priv->abyBBVGA[0] = 0x1C;
@@ -2176,12 +2174,12 @@ bool BBbVT3253Init(struct vnt_private *priv)
 		priv->abyBBVGA[0] = 0x1C;
 	}
 
-	if (byLocalID > REV_ID_VT3253_A1) {
-		BBbWriteEmbedded(priv, 0x04, 0x7F);
-		BBbWriteEmbedded(priv, 0x0D, 0x01);
+	if (by_local_id > REV_ID_VT3253_A1) {
+		bb_write_embedded(priv, 0x04, 0x7F);
+		bb_write_embedded(priv, 0x0D, 0x01);
 	}
 
-	return bResult;
+	return result;
 }
 
 /*
@@ -2197,42 +2195,42 @@ bool BBbVT3253Init(struct vnt_private *priv)
  *
  */
 void
-BBvSetShortSlotTime(struct vnt_private *priv)
+bb_set_short_slot_time(struct vnt_private *priv)
 {
-	unsigned char byBBRxConf = 0;
-	unsigned char byBBVGA = 0;
+	unsigned char by_bb_rx_conf = 0;
+	unsigned char by_bb_vga = 0;
 
-	BBbReadEmbedded(priv, 0x0A, &byBBRxConf); /* CR10 */
+	bb_read_embedded(priv, 0x0A, &by_bb_rx_conf); /* CR10 */
 
 	if (priv->bShortSlotTime)
-		byBBRxConf &= 0xDF; /* 1101 1111 */
+		by_bb_rx_conf &= 0xDF; /* 1101 1111 */
 	else
-		byBBRxConf |= 0x20; /* 0010 0000 */
+		by_bb_rx_conf |= 0x20; /* 0010 0000 */
 
 	/* patch for 3253B0 Baseband with Cardbus module */
-	BBbReadEmbedded(priv, 0xE7, &byBBVGA);
-	if (byBBVGA == priv->abyBBVGA[0])
-		byBBRxConf |= 0x20; /* 0010 0000 */
+	bb_read_embedded(priv, 0xE7, &by_bb_vga);
+	if (by_bb_vga == priv->abyBBVGA[0])
+		by_bb_rx_conf |= 0x20; /* 0010 0000 */
 
-	BBbWriteEmbedded(priv, 0x0A, byBBRxConf); /* CR10 */
+	bb_write_embedded(priv, 0x0A, by_bb_rx_conf); /* CR10 */
 }
 
-void BBvSetVGAGainOffset(struct vnt_private *priv, unsigned char byData)
+void bb_set_vga_gain_offset(struct vnt_private *priv, unsigned char by_data)
 {
-	unsigned char byBBRxConf = 0;
+	unsigned char by_bb_rx_conf = 0;
 
-	BBbWriteEmbedded(priv, 0xE7, byData);
+	bb_write_embedded(priv, 0xE7, by_data);
 
-	BBbReadEmbedded(priv, 0x0A, &byBBRxConf); /* CR10 */
+	bb_read_embedded(priv, 0x0A, &by_bb_rx_conf); /* CR10 */
 	/* patch for 3253B0 Baseband with Cardbus module */
-	if (byData == priv->abyBBVGA[0])
-		byBBRxConf |= 0x20; /* 0010 0000 */
+	if (by_data == priv->abyBBVGA[0])
+		by_bb_rx_conf |= 0x20; /* 0010 0000 */
 	else if (priv->bShortSlotTime)
-		byBBRxConf &= 0xDF; /* 1101 1111 */
+		by_bb_rx_conf &= 0xDF; /* 1101 1111 */
 	else
-		byBBRxConf |= 0x20; /* 0010 0000 */
-	priv->byBBVGACurrent = byData;
-	BBbWriteEmbedded(priv, 0x0A, byBBRxConf); /* CR10 */
+		by_bb_rx_conf |= 0x20; /* 0010 0000 */
+	priv->byBBVGACurrent = by_data;
+	bb_write_embedded(priv, 0x0A, by_bb_rx_conf); /* CR10 */
 }
 
 /*
@@ -2248,12 +2246,12 @@ void BBvSetVGAGainOffset(struct vnt_private *priv, unsigned char byData)
  *
  */
 void
-BBvSoftwareReset(struct vnt_private *priv)
+bb_software_reset(struct vnt_private *priv)
 {
-	BBbWriteEmbedded(priv, 0x50, 0x40);
-	BBbWriteEmbedded(priv, 0x50, 0);
-	BBbWriteEmbedded(priv, 0x9C, 0x01);
-	BBbWriteEmbedded(priv, 0x9C, 0);
+	bb_write_embedded(priv, 0x50, 0x40);
+	bb_write_embedded(priv, 0x50, 0);
+	bb_write_embedded(priv, 0x9C, 0x01);
+	bb_write_embedded(priv, 0x9C, 0);
 }
 
 /*
@@ -2269,13 +2267,13 @@ BBvSoftwareReset(struct vnt_private *priv)
  *
  */
 void
-BBvPowerSaveModeON(struct vnt_private *priv)
+bb_power_save_mode_on(struct vnt_private *priv)
 {
-	unsigned char byOrgData;
+	unsigned char by_org_data;
 
-	BBbReadEmbedded(priv, 0x0D, &byOrgData);
-	byOrgData |= BIT(0);
-	BBbWriteEmbedded(priv, 0x0D, byOrgData);
+	bb_read_embedded(priv, 0x0D, &by_org_data);
+	by_org_data |= BIT(0);
+	bb_write_embedded(priv, 0x0D, by_org_data);
 }
 
 /*
@@ -2291,13 +2289,13 @@ BBvPowerSaveModeON(struct vnt_private *priv)
  *
  */
 void
-BBvPowerSaveModeOFF(struct vnt_private *priv)
+bb_power_save_mode_off(struct vnt_private *priv)
 {
-	unsigned char byOrgData;
+	unsigned char by_org_data;
 
-	BBbReadEmbedded(priv, 0x0D, &byOrgData);
-	byOrgData &= ~(BIT(0));
-	BBbWriteEmbedded(priv, 0x0D, byOrgData);
+	bb_read_embedded(priv, 0x0D, &by_org_data);
+	by_org_data &= ~(BIT(0));
+	bb_write_embedded(priv, 0x0D, by_org_data);
 }
 
 /*
@@ -2306,7 +2304,7 @@ BBvPowerSaveModeOFF(struct vnt_private *priv)
  * Parameters:
  *  In:
  *      priv          - Device Structure
- *      byAntennaMode    - Antenna Mode
+ *      by_antenna_mode    - Antenna Mode
  *  Out:
  *      none
  *
@@ -2315,22 +2313,22 @@ BBvPowerSaveModeOFF(struct vnt_private *priv)
  */
 
 void
-BBvSetTxAntennaMode(struct vnt_private *priv, unsigned char byAntennaMode)
+bb_set_tx_antenna_mode(struct vnt_private *priv, unsigned char by_antenna_mode)
 {
-	unsigned char byBBTxConf;
+	unsigned char by_bb_tx_conf;
 
-	BBbReadEmbedded(priv, 0x09, &byBBTxConf); /* CR09 */
-	if (byAntennaMode == ANT_DIVERSITY) {
+	bb_read_embedded(priv, 0x09, &by_bb_tx_conf); /* CR09 */
+	if (by_antenna_mode == ANT_DIVERSITY) {
 		/* bit 1 is diversity */
-		byBBTxConf |= 0x02;
-	} else if (byAntennaMode == ANT_A) {
+		by_bb_tx_conf |= 0x02;
+	} else if (by_antenna_mode == ANT_A) {
 		/* bit 2 is ANTSEL */
-		byBBTxConf &= 0xF9; /* 1111 1001 */
-	} else if (byAntennaMode == ANT_B) {
-		byBBTxConf &= 0xFD; /* 1111 1101 */
-		byBBTxConf |= 0x04;
+		by_bb_tx_conf &= 0xF9; /* 1111 1001 */
+	} else if (by_antenna_mode == ANT_B) {
+		by_bb_tx_conf &= 0xFD; /* 1111 1101 */
+		by_bb_tx_conf |= 0x04;
 	}
-	BBbWriteEmbedded(priv, 0x09, byBBTxConf); /* CR09 */
+	bb_write_embedded(priv, 0x09, by_bb_tx_conf); /* CR09 */
 }
 
 /*
@@ -2339,7 +2337,7 @@ BBvSetTxAntennaMode(struct vnt_private *priv, unsigned char byAntennaMode)
  * Parameters:
  *  In:
  *      priv          - Device Structure
- *      byAntennaMode    - Antenna Mode
+ *      by_antenna_mode   - Antenna Mode
  *  Out:
  *      none
  *
@@ -2348,25 +2346,25 @@ BBvSetTxAntennaMode(struct vnt_private *priv, unsigned char byAntennaMode)
  */
 
 void
-BBvSetRxAntennaMode(struct vnt_private *priv, unsigned char byAntennaMode)
+bb_set_rx_antenna_mode(struct vnt_private *priv, unsigned char by_antenna_mode)
 {
-	unsigned char byBBRxConf;
+	unsigned char by_bb_rx_conf;
 
-	BBbReadEmbedded(priv, 0x0A, &byBBRxConf); /* CR10 */
-	if (byAntennaMode == ANT_DIVERSITY) {
-		byBBRxConf |= 0x01;
+	bb_read_embedded(priv, 0x0A, &by_bb_rx_conf); /* CR10 */
+	if (by_antenna_mode == ANT_DIVERSITY) {
+		by_bb_rx_conf |= 0x01;
 
-	} else if (byAntennaMode == ANT_A) {
-		byBBRxConf &= 0xFC; /* 1111 1100 */
-	} else if (byAntennaMode == ANT_B) {
-		byBBRxConf &= 0xFE; /* 1111 1110 */
-		byBBRxConf |= 0x02;
+	} else if (by_antenna_mode == ANT_A) {
+		by_bb_rx_conf &= 0xFC; /* 1111 1100 */
+	} else if (by_antenna_mode == ANT_B) {
+		by_bb_rx_conf &= 0xFE; /* 1111 1110 */
+		by_bb_rx_conf |= 0x02;
 	}
-	BBbWriteEmbedded(priv, 0x0A, byBBRxConf); /* CR10 */
+	bb_write_embedded(priv, 0x0A, by_bb_rx_conf); /* CR10 */
 }
 
 /*
- * Description: BBvSetDeepSleep
+ * Description: bb_set_deep_sleep
  *
  * Parameters:
  *  In:
@@ -2378,15 +2376,9 @@ BBvSetRxAntennaMode(struct vnt_private *priv, unsigned char byAntennaMode)
  *
  */
 void
-BBvSetDeepSleep(struct vnt_private *priv, unsigned char byLocalID)
+bb_set_deep_sleep(struct vnt_private *priv, unsigned char by_local_id)
 {
-	BBbWriteEmbedded(priv, 0x0C, 0x17); /* CR12 */
-	BBbWriteEmbedded(priv, 0x0D, 0xB9); /* CR13 */
+	bb_write_embedded(priv, 0x0C, 0x17); /* CR12 */
+	bb_write_embedded(priv, 0x0D, 0xB9); /* CR13 */
 }
 
-void
-BBvExitDeepSleep(struct vnt_private *priv, unsigned char byLocalID)
-{
-	BBbWriteEmbedded(priv, 0x0C, 0x00); /* CR12 */
-	BBbWriteEmbedded(priv, 0x0D, 0x01); /* CR13 */
-}
diff --git a/drivers/staging/vt6655/baseband.h b/drivers/staging/vt6655/baseband.h
index 0cc2e07829c5..9354ce724446 100644
--- a/drivers/staging/vt6655/baseband.h
+++ b/drivers/staging/vt6655/baseband.h
@@ -46,30 +46,31 @@
 #define TOP_RATE_2M         0x00200000
 #define TOP_RATE_1M         0x00100000
 
-unsigned int BBuGetFrameTime(unsigned char byPreambleType,
-			     unsigned char byPktType,
-			     unsigned int cbFrameLength,
-			     unsigned short wRate);
+unsigned int bb_get_frame_time(unsigned char by_preamble_type,
+			       unsigned char by_pkt_type,
+			       unsigned int cb_frame_length,
+			       unsigned short w_rate);
 
 void vnt_get_phy_field(struct vnt_private *priv, u32 frame_length,
 		       u16 tx_rate, u8 pkt_type, struct vnt_phy_field *phy);
 
-bool BBbReadEmbedded(struct vnt_private *priv, unsigned char byBBAddr,
-		     unsigned char *pbyData);
-bool BBbWriteEmbedded(struct vnt_private *priv, unsigned char byBBAddr,
-		      unsigned char byData);
+bool bb_read_embedded(struct vnt_private *priv, unsigned char by_bb_addr,
+		      unsigned char *pby_data);
+bool bb_write_embedded(struct vnt_private *priv, unsigned char by_bb_addr,
+		       unsigned char by_data);
 
-void BBvSetShortSlotTime(struct vnt_private *priv);
-void BBvSetVGAGainOffset(struct vnt_private *priv, unsigned char byData);
+void bb_set_short_slot_time(struct vnt_private *priv);
+void bb_set_vga_gain_offset(struct vnt_private *priv, unsigned char by_data);
 
 /* VT3253 Baseband */
-bool BBbVT3253Init(struct vnt_private *priv);
-void BBvSoftwareReset(struct vnt_private *priv);
-void BBvPowerSaveModeON(struct vnt_private *priv);
-void BBvPowerSaveModeOFF(struct vnt_private *priv);
-void BBvSetTxAntennaMode(struct vnt_private *priv, unsigned char byAntennaMode);
-void BBvSetRxAntennaMode(struct vnt_private *priv, unsigned char byAntennaMode);
-void BBvSetDeepSleep(struct vnt_private *priv, unsigned char byLocalID);
-void BBvExitDeepSleep(struct vnt_private *priv, unsigned char byLocalID);
+bool bb_vt3253_init(struct vnt_private *priv);
+void bb_software_reset(struct vnt_private *priv);
+void bb_power_save_mode_on(struct vnt_private *priv);
+void bb_power_save_mode_off(struct vnt_private *priv);
+void bb_set_tx_antenna_mode(struct vnt_private *priv,
+			    unsigned char by_antenna_mode);
+void bb_set_rx_antenna_mode(struct vnt_private *priv,
+			    unsigned char by_antenna_mode);
+void bb_set_deep_sleep(struct vnt_private *priv, unsigned char by_local_id);
 
 #endif /* __BASEBAND_H__ */
diff --git a/drivers/staging/vt6655/card.c b/drivers/staging/vt6655/card.c
index e65c9825ea5a..6148310c06d6 100644
--- a/drivers/staging/vt6655/card.c
+++ b/drivers/staging/vt6655/card.c
@@ -11,15 +11,12 @@
  *      CARDvUpdateBasicTopRate - Update BasicTopRate
  *      CARDbAddBasicRate - Add to BasicRateSet
  *      CARDbIsOFDMinBasicRate - Check if any OFDM rate is in BasicRateSet
- *      CARDvSetLoopbackMode - Set Loopback mode
- *      CARDbSoftwareReset - Sortware reset NIC
  *      CARDqGetTSFOffset - Calculate TSFOffset
  *      CARDbGetCurrentTSF - Read Current NIC TSF counter
  *      CARDqGetNextTBTT - Calculate Next Beacon TSF counter
  *      CARDvSetFirstNextTBTT - Set NIC Beacon time
  *      CARDvUpdateNextTBTT - Sync. NIC Beacon time
  *      CARDbRadioPowerOff - Turn Off NIC Radio Power
- *      CARDbRadioPowerOn - Turn On NIC Radio Power
  *
  * Revision History:
  *      06-10-2003 Bryan YC Fan:  Re-write codes to support VT3253 spec.
@@ -198,22 +195,22 @@ bool CARDbSetPhyParameter(struct vnt_private *priv, u8 bb_type)
 			priv->abyBBVGA[0] = 0x20;
 			priv->abyBBVGA[2] = 0x10;
 			priv->abyBBVGA[3] = 0x10;
-			BBbReadEmbedded(priv, 0xE7, &byData);
+			bb_read_embedded(priv, 0xE7, &byData);
 			if (byData == 0x1C)
-				BBbWriteEmbedded(priv, 0xE7, priv->abyBBVGA[0]);
+				bb_write_embedded(priv, 0xE7, priv->abyBBVGA[0]);
 
 		} else if (priv->byRFType == RF_UW2452) {
 			MACvSetBBType(priv->PortOffset, BB_TYPE_11A);
 			priv->abyBBVGA[0] = 0x18;
-			BBbReadEmbedded(priv, 0xE7, &byData);
+			bb_read_embedded(priv, 0xE7, &byData);
 			if (byData == 0x14) {
-				BBbWriteEmbedded(priv, 0xE7, priv->abyBBVGA[0]);
-				BBbWriteEmbedded(priv, 0xE1, 0x57);
+				bb_write_embedded(priv, 0xE7, priv->abyBBVGA[0]);
+				bb_write_embedded(priv, 0xE1, 0x57);
 			}
 		} else {
 			MACvSetBBType(priv->PortOffset, BB_TYPE_11A);
 		}
-		BBbWriteEmbedded(priv, 0x88, 0x03);
+		bb_write_embedded(priv, 0x88, 0x03);
 		bySlot = C_SLOT_SHORT;
 		bySIFS = C_SIFS_A;
 		byDIFS = C_SIFS_A + 2 * C_SLOT_SHORT;
@@ -224,19 +221,19 @@ bool CARDbSetPhyParameter(struct vnt_private *priv, u8 bb_type)
 			priv->abyBBVGA[0] = 0x1C;
 			priv->abyBBVGA[2] = 0x00;
 			priv->abyBBVGA[3] = 0x00;
-			BBbReadEmbedded(priv, 0xE7, &byData);
+			bb_read_embedded(priv, 0xE7, &byData);
 			if (byData == 0x20)
-				BBbWriteEmbedded(priv, 0xE7, priv->abyBBVGA[0]);
+				bb_write_embedded(priv, 0xE7, priv->abyBBVGA[0]);
 
 		} else if (priv->byRFType == RF_UW2452) {
 			priv->abyBBVGA[0] = 0x14;
-			BBbReadEmbedded(priv, 0xE7, &byData);
+			bb_read_embedded(priv, 0xE7, &byData);
 			if (byData == 0x18) {
-				BBbWriteEmbedded(priv, 0xE7, priv->abyBBVGA[0]);
-				BBbWriteEmbedded(priv, 0xE1, 0xD3);
+				bb_write_embedded(priv, 0xE7, priv->abyBBVGA[0]);
+				bb_write_embedded(priv, 0xE1, 0xD3);
 			}
 		}
-		BBbWriteEmbedded(priv, 0x88, 0x02);
+		bb_write_embedded(priv, 0x88, 0x02);
 		bySlot = C_SLOT_LONG;
 		bySIFS = C_SIFS_BG;
 		byDIFS = C_SIFS_BG + 2 * C_SLOT_LONG;
@@ -247,19 +244,19 @@ bool CARDbSetPhyParameter(struct vnt_private *priv, u8 bb_type)
 			priv->abyBBVGA[0] = 0x1C;
 			priv->abyBBVGA[2] = 0x00;
 			priv->abyBBVGA[3] = 0x00;
-			BBbReadEmbedded(priv, 0xE7, &byData);
+			bb_read_embedded(priv, 0xE7, &byData);
 			if (byData == 0x20)
-				BBbWriteEmbedded(priv, 0xE7, priv->abyBBVGA[0]);
+				bb_write_embedded(priv, 0xE7, priv->abyBBVGA[0]);
 
 		} else if (priv->byRFType == RF_UW2452) {
 			priv->abyBBVGA[0] = 0x14;
-			BBbReadEmbedded(priv, 0xE7, &byData);
+			bb_read_embedded(priv, 0xE7, &byData);
 			if (byData == 0x18) {
-				BBbWriteEmbedded(priv, 0xE7, priv->abyBBVGA[0]);
-				BBbWriteEmbedded(priv, 0xE1, 0xD3);
+				bb_write_embedded(priv, 0xE7, priv->abyBBVGA[0]);
+				bb_write_embedded(priv, 0xE1, 0xD3);
 			}
 		}
-		BBbWriteEmbedded(priv, 0x88, 0x08);
+		bb_write_embedded(priv, 0x88, 0x08);
 		bySIFS = C_SIFS_BG;
 
 		if (priv->bShortSlotTime) {
@@ -310,7 +307,7 @@ bool CARDbSetPhyParameter(struct vnt_private *priv, u8 bb_type)
 		priv->bySlot = bySlot;
 		VNSvOutPortB(priv->PortOffset + MAC_REG_SLOT, priv->bySlot);
 
-		BBvSetShortSlotTime(priv);
+		bb_set_short_slot_time(priv);
 	}
 	if (priv->byCWMaxMin != byCWMaxMin) {
 		priv->byCWMaxMin = byCWMaxMin;
@@ -431,7 +428,7 @@ void CARDbRadioPowerOff(struct vnt_private *priv)
 
 	MACvRegBitsOff(priv->PortOffset, MAC_REG_HOSTCR, HOSTCR_RXON);
 
-	BBvSetDeepSleep(priv, priv->byLocalID);
+	bb_set_deep_sleep(priv, priv->byLocalID);
 
 	priv->bRadioOff = true;
 	pr_debug("chester power off\n");
@@ -439,60 +436,6 @@ void CARDbRadioPowerOff(struct vnt_private *priv)
 		      LED_ACTSET);  /* LED issue */
 }
 
-/*
- * Description: Turn on Radio power
- *
- * Parameters:
- *  In:
- *      priv         - The adapter to be turned on
- *  Out:
- *      none
- *
- * Return Value: true if success; otherwise false
- */
-bool CARDbRadioPowerOn(struct vnt_private *priv)
-{
-	bool bResult = true;
-
-	pr_debug("chester power on\n");
-	if (priv->bRadioControlOff) {
-		if (priv->bHWRadioOff)
-			pr_debug("chester bHWRadioOff\n");
-		if (priv->bRadioControlOff)
-			pr_debug("chester bRadioControlOff\n");
-		return false; }
-
-	if (!priv->bRadioOff) {
-		pr_debug("chester pbRadioOff\n");
-		return true; }
-
-	BBvExitDeepSleep(priv, priv->byLocalID);
-
-	MACvRegBitsOn(priv->PortOffset, MAC_REG_HOSTCR, HOSTCR_RXON);
-
-	switch (priv->byRFType) {
-	case RF_RFMD2959:
-		MACvWordRegBitsOn(priv->PortOffset, MAC_REG_SOFTPWRCTL,
-				  SOFTPWRCTL_TXPEINV);
-		MACvWordRegBitsOff(priv->PortOffset, MAC_REG_SOFTPWRCTL,
-				   SOFTPWRCTL_SWPE1);
-		break;
-
-	case RF_AIROHA:
-	case RF_AL2230S:
-	case RF_AIROHA7230:
-		MACvWordRegBitsOn(priv->PortOffset, MAC_REG_SOFTPWRCTL,
-				  (SOFTPWRCTL_SWPE2 | SOFTPWRCTL_SWPE3));
-		break;
-	}
-
-	priv->bRadioOff = false;
-	pr_debug("chester power on\n");
-	MACvRegBitsOff(priv->PortOffset, MAC_REG_GPIOCTL0,
-		       LED_ACTSET); /* LED issue */
-	return bResult;
-}
-
 void CARDvSafeResetTx(struct vnt_private *priv)
 {
 	unsigned int uu;
@@ -815,54 +758,6 @@ unsigned char CARDbyGetPktType(struct vnt_private *priv)
 		return PK_TYPE_11GB;
 }
 
-/*
- * Description: Set NIC Loopback mode
- *
- * Parameters:
- *  In:
- *      priv         - The adapter to be set
- *      wLoopbackMode   - Loopback mode to be set
- *  Out:
- *      none
- *
- * Return Value: none
- */
-void CARDvSetLoopbackMode(struct vnt_private *priv,
-			  unsigned short wLoopbackMode)
-{
-	switch (wLoopbackMode) {
-	case CARD_LB_NONE:
-	case CARD_LB_MAC:
-	case CARD_LB_PHY:
-		break;
-	default:
-		break;
-	}
-	/* set MAC loopback */
-	MACvSetLoopbackMode(priv, LOBYTE(wLoopbackMode));
-	/* set Baseband loopback */
-}
-
-/*
- * Description: Software Reset NIC
- *
- * Parameters:
- *  In:
- *      priv         - The adapter to be reset
- *  Out:
- *      none
- *
- * Return Value: none
- */
-bool CARDbSoftwareReset(struct vnt_private *priv)
-{
-	/* reset MAC */
-	if (!MACbSafeSoftwareReset(priv))
-		return false;
-
-	return true;
-}
-
 /*
  * Description: Calculate TSF offset of two TSF input
  *              Get TSF Offset from RxBCN's TSF and local TSF
diff --git a/drivers/staging/vt6655/card.h b/drivers/staging/vt6655/card.h
index 337266add6b2..568a2ddd6588 100644
--- a/drivers/staging/vt6655/card.h
+++ b/drivers/staging/vt6655/card.h
@@ -44,9 +44,6 @@ struct vnt_private;
 void CARDvSetRSPINF(struct vnt_private *priv, u8 bb_type);
 void CARDvUpdateBasicTopRate(struct vnt_private *priv);
 bool CARDbIsOFDMinBasicRate(struct vnt_private *priv);
-void CARDvSetLoopbackMode(struct vnt_private *priv,
-			  unsigned short wLoopbackMode);
-bool CARDbSoftwareReset(struct vnt_private *priv);
 void CARDvSetFirstNextTBTT(struct vnt_private *priv,
 			   unsigned short wBeaconInterval);
 void CARDvUpdateNextTBTT(struct vnt_private *priv, u64 qwTSF,
@@ -58,7 +55,6 @@ unsigned char CARDbyGetPktType(struct vnt_private *priv);
 void CARDvSafeResetTx(struct vnt_private *priv);
 void CARDvSafeResetRx(struct vnt_private *priv);
 void CARDbRadioPowerOff(struct vnt_private *priv);
-bool CARDbRadioPowerOn(struct vnt_private *priv);
 bool CARDbSetPhyParameter(struct vnt_private *priv, u8 bb_type);
 bool CARDbUpdateTSF(struct vnt_private *priv, unsigned char byRxRate,
 		    u64 qwBSSTimestamp);
diff --git a/drivers/staging/vt6655/channel.c b/drivers/staging/vt6655/channel.c
index dec6f0f23b88..62a85c1ca6c4 100644
--- a/drivers/staging/vt6655/channel.c
+++ b/drivers/staging/vt6655/channel.c
@@ -173,7 +173,7 @@ bool set_channel(struct vnt_private *priv, struct ieee80211_channel *ch)
 	    priv->byBBVGACurrent != priv->abyBBVGA[0]) {
 		priv->byBBVGACurrent = priv->abyBBVGA[0];
 
-		BBvSetVGAGainOffset(priv, priv->byBBVGACurrent);
+		bb_set_vga_gain_offset(priv, priv->byBBVGACurrent);
 	}
 
 	/* clear NAV */
@@ -195,7 +195,7 @@ bool set_channel(struct vnt_private *priv, struct ieee80211_channel *ch)
 	if (priv->bEnablePSMode)
 		RFvWriteWakeProgSyn(priv, priv->byRFType, ch->hw_value);
 
-	BBvSoftwareReset(priv);
+	bb_software_reset(priv);
 
 	if (priv->byLocalID > REV_ID_VT3253_B1) {
 		unsigned long flags;
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index 5c86cc60eb5c..5889023d19c4 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -21,14 +21,14 @@
  *   device_alloc_rx_buf - rx buffer pre-allocated function
  *   device_free_rx_buf - free rx buffer function
  *   device_free_tx_buf - free tx buffer function
- *   device_init_rd0_ring- initial rd dma0 ring
- *   device_init_rd1_ring- initial rd dma1 ring
- *   device_init_td0_ring- initial tx dma0 ring buffer
- *   device_init_td1_ring- initial tx dma1 ring buffer
- *   device_init_registers- initial MAC & BBP & RF internal registers.
- *   device_init_rings- initial tx/rx ring buffer
- *   device_free_rings- free all allocated ring buffer
- *   device_tx_srv- tx interrupt service function
+ *   device_init_rd0_ring - initial rd dma0 ring
+ *   device_init_rd1_ring - initial rd dma1 ring
+ *   device_init_td0_ring - initial tx dma0 ring buffer
+ *   device_init_td1_ring - initial tx dma1 ring buffer
+ *   device_init_registers - initial MAC & BBP & RF internal registers.
+ *   device_init_rings - initial tx/rx ring buffer
+ *   device_free_rings - free all allocated ring buffer
+ *   device_tx_srv - tx interrupt service function
  *
  * Revision History:
  */
@@ -202,7 +202,7 @@ static void device_init_registers(struct vnt_private *priv)
 	unsigned char byOFDMPwrdBm = 0;
 
 	MACbShutdown(priv);
-	BBvSoftwareReset(priv);
+	bb_software_reset(priv);
 
 	/* Do MACbSoftwareReset in MACvInitialize */
 	MACbSoftwareReset(priv);
@@ -279,8 +279,8 @@ static void device_init_registers(struct vnt_private *priv)
 	}
 
 	/* Set initial antenna mode */
-	BBvSetTxAntennaMode(priv, priv->byTxAntennaMode);
-	BBvSetRxAntennaMode(priv, priv->byRxAntennaMode);
+	bb_set_tx_antenna_mode(priv, priv->byTxAntennaMode);
+	bb_set_rx_antenna_mode(priv, priv->byRxAntennaMode);
 
 	/* zonetype initial */
 	priv->byOriginalZonetype = priv->abyEEPROM[EEP_OFS_ZONETYPE];
@@ -357,16 +357,16 @@ static void device_init_registers(struct vnt_private *priv)
 	VNSvOutPortB(priv->PortOffset + MAC_REG_TFTCTL, TFTCTL_TSFCNTREN);
 
 	/* initialize BBP registers */
-	BBbVT3253Init(priv);
+	bb_vt3253_init(priv);
 
 	if (priv->bUpdateBBVGA) {
 		priv->byBBVGACurrent = priv->abyBBVGA[0];
 		priv->byBBVGANew = priv->byBBVGACurrent;
-		BBvSetVGAGainOffset(priv, priv->abyBBVGA[0]);
+		bb_set_vga_gain_offset(priv, priv->abyBBVGA[0]);
 	}
 
-	BBvSetRxAntennaMode(priv, priv->byRxAntennaMode);
-	BBvSetTxAntennaMode(priv, priv->byTxAntennaMode);
+	bb_set_rx_antenna_mode(priv, priv->byRxAntennaMode);
+	bb_set_tx_antenna_mode(priv, priv->byTxAntennaMode);
 
 	/* Set BB and packet type at the same time. */
 	/* Set Short Slot Time, xIFS, and RSPINF. */
@@ -1001,7 +1001,7 @@ static void vnt_check_bb_vga(struct vnt_private *priv)
 
 	if (priv->uBBVGADiffCount == 1) {
 		/* first VGA diff gain */
-		BBvSetVGAGainOffset(priv, priv->byBBVGANew);
+		bb_set_vga_gain_offset(priv, priv->byBBVGANew);
 
 		dev_dbg(&priv->pcid->dev,
 			"First RSSI[%d] NewGain[%d] OldGain[%d] Count[%d]\n",
@@ -1017,7 +1017,7 @@ static void vnt_check_bb_vga(struct vnt_private *priv)
 			priv->byBBVGACurrent,
 			(int)priv->uBBVGADiffCount);
 
-		BBvSetVGAGainOffset(priv, priv->byBBVGANew);
+		bb_set_vga_gain_offset(priv, priv->byBBVGANew);
 	}
 }
 
@@ -1445,7 +1445,7 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
 			priv->bShortSlotTime = false;
 
 		CARDbSetPhyParameter(priv, priv->byBBType);
-		BBvSetVGAGainOffset(priv, priv->abyBBVGA[0]);
+		bb_set_vga_gain_offset(priv, priv->abyBBVGA[0]);
 	}
 
 	if (changed & BSS_CHANGED_TXPOWER)
diff --git a/drivers/staging/vt6655/rf.c b/drivers/staging/vt6655/rf.c
index d6ca6e5551a7..747d79265a7c 100644
--- a/drivers/staging/vt6655/rf.c
+++ b/drivers/staging/vt6655/rf.c
@@ -419,7 +419,7 @@ static bool s_bAL7230Init(struct vnt_private *priv)
 
 	MACvWordRegBitsOn(iobase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPECTI  |
 							 SOFTPWRCTL_TXPEINV));
-	BBvPowerSaveModeOFF(priv); /* RobertYu:20050106, have DC value for Calibration */
+	bb_power_save_mode_off(priv); /* RobertYu:20050106, have DC value for Calibration */
 
 	for (ii = 0; ii < CB_AL7230_INIT_SEQ; ii++)
 		ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[ii]);
@@ -443,7 +443,7 @@ static bool s_bAL7230Init(struct vnt_private *priv)
 							 SOFTPWRCTL_SWPECTI  |
 							 SOFTPWRCTL_TXPEINV));
 
-	BBvPowerSaveModeON(priv); /* RobertYu:20050106 */
+	bb_power_save_mode_on(priv); /* RobertYu:20050106 */
 
 	/* PE1: TX_ON, PE2: RX_ON, PE3: PLLON */
 	/* 3-wire control for power saving mode */
diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c
index 37fcc42ed000..2f9c2ead3cb8 100644
--- a/drivers/staging/vt6655/rxtx.c
+++ b/drivers/staging/vt6655/rxtx.c
@@ -165,11 +165,11 @@ s_uGetTxRsvTime(
 {
 	unsigned int uDataTime, uAckTime;
 
-	uDataTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, cbFrameLength, wRate);
+	uDataTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, cbFrameLength, wRate);
 	if (byPktType == PK_TYPE_11B) /* llb,CCK mode */
-		uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, (unsigned short)pDevice->byTopCCKBasicRate);
+		uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, (unsigned short)pDevice->byTopCCKBasicRate);
 	else /* 11g 2.4G OFDM mode & 11a 5G OFDM mode */
-		uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, (unsigned short)pDevice->byTopOFDMBasicRate);
+		uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, (unsigned short)pDevice->byTopOFDMBasicRate);
 
 	if (bNeedAck)
 		return uDataTime + pDevice->uSIFS + uAckTime;
@@ -195,24 +195,28 @@ s_uGetRTSCTSRsvTime(
 	unsigned short wCurrentRate
 )
 {
-	unsigned int uRrvTime, uRTSTime, uCTSTime, uAckTime, uDataTime;
+	unsigned int uRrvTime = 0;
+	unsigned int uRTSTime = 0;
+	unsigned int uCTSTime = 0;
+	unsigned int uAckTime = 0;
+	unsigned int uDataTime = 0;
 
-	uRrvTime = uRTSTime = uCTSTime = uAckTime = uDataTime = 0;
-
-	uDataTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, cbFrameLength, wCurrentRate);
+	uDataTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, cbFrameLength, wCurrentRate);
 	if (byRTSRsvType == 0) { /* RTSTxRrvTime_bb */
-		uRTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 20, pDevice->byTopCCKBasicRate);
-		uCTSTime = uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+		uRTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 20, pDevice->byTopCCKBasicRate);
+		uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+		uCTSTime = uAckTime;
 	} else if (byRTSRsvType == 1) { /* RTSTxRrvTime_ba, only in 2.4GHZ */
-		uRTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 20, pDevice->byTopCCKBasicRate);
-		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
-		uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+		uRTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 20, pDevice->byTopCCKBasicRate);
+		uCTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+		uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
 	} else if (byRTSRsvType == 2) { /* RTSTxRrvTime_aa */
-		uRTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 20, pDevice->byTopOFDMBasicRate);
-		uCTSTime = uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+		uRTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 20, pDevice->byTopOFDMBasicRate);
+		uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+		uCTSTime = uAckTime;
 	} else if (byRTSRsvType == 3) { /* CTSTxRrvTime_ba, only in 2.4GHZ */
-		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
-		uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+		uCTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+		uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
 		uRrvTime = uCTSTime + uAckTime + uDataTime + 2 * pDevice->uSIFS;
 		return cpu_to_le16((u16)uRrvTime);
 	}
@@ -239,136 +243,125 @@ s_uGetDataDuration(
 )
 {
 	bool bLastFrag = false;
-	unsigned int uAckTime = 0, uNextPktTime = 0;
+	unsigned int uAckTime = 0, uNextPktTime = 0, len;
 
 	if (uFragIdx == (uMACfragNum - 1))
 		bLastFrag = true;
 
+	if (uFragIdx == (uMACfragNum - 2))
+		len = cbLastFragmentSize;
+	else
+		len = cbFrameLength;
+
 	switch (byDurType) {
 	case DATADUR_B:    /* DATADUR_B */
 		if (((uMACfragNum == 1)) || bLastFrag) {/* Non Frag or Last Frag */
 			if (bNeedAck) {
-				uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+				uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
 				return pDevice->uSIFS + uAckTime;
 			} else {
 				return 0;
 			}
 		} else {/* First Frag or Mid Frag */
-			if (uFragIdx == (uMACfragNum - 2))
-				uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wRate, bNeedAck);
-			else
-				uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
+			uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, len, wRate, bNeedAck);
 
 			if (bNeedAck) {
-				uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
-				return pDevice->uSIFS + uAckTime + uNextPktTime;
-			} else {
-				return pDevice->uSIFS + uNextPktTime;
+				uAckTime = bb_get_frame_time(pDevice->byPreambleType,
+							     byPktType, 14,
+							     pDevice->byTopCCKBasicRate);
 			}
+			return pDevice->uSIFS + uAckTime + uNextPktTime;
 		}
 		break;
 
 	case DATADUR_A:    /* DATADUR_A */
 		if (((uMACfragNum == 1)) || bLastFrag) {/* Non Frag or Last Frag */
 			if (bNeedAck) {
-				uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+				uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
 				return pDevice->uSIFS + uAckTime;
 			} else {
 				return 0;
 			}
 		} else {/* First Frag or Mid Frag */
-			if (uFragIdx == (uMACfragNum - 2))
-				uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wRate, bNeedAck);
-			else
-				uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
+			uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, len,
+						       wRate, bNeedAck);
 
 			if (bNeedAck) {
-				uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
-				return pDevice->uSIFS + uAckTime + uNextPktTime;
-			} else {
-				return pDevice->uSIFS + uNextPktTime;
+				uAckTime = bb_get_frame_time(pDevice->byPreambleType,
+							     byPktType, 14,
+							     pDevice->byTopOFDMBasicRate);
 			}
+			return pDevice->uSIFS + uAckTime + uNextPktTime;
 		}
 		break;
 
 	case DATADUR_A_F0:    /* DATADUR_A_F0 */
 		if (((uMACfragNum == 1)) || bLastFrag) {/* Non Frag or Last Frag */
 			if (bNeedAck) {
-				uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+				uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
 				return pDevice->uSIFS + uAckTime;
 			} else {
 				return 0;
 			}
 		} else { /* First Frag or Mid Frag */
+			if (wRate < RATE_18M)
+				wRate = RATE_18M;
+			else if (wRate > RATE_54M)
+				wRate = RATE_54M;
+
 			if (byFBOption == AUTO_FB_0) {
-				if (wRate < RATE_18M)
-					wRate = RATE_18M;
-				else if (wRate > RATE_54M)
-					wRate = RATE_54M;
-
-				if (uFragIdx == (uMACfragNum - 2))
-					uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
-				else
-					uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
-
-			} else { /* (byFBOption == AUTO_FB_1) */
-				if (wRate < RATE_18M)
-					wRate = RATE_18M;
-				else if (wRate > RATE_54M)
-					wRate = RATE_54M;
-
-				if (uFragIdx == (uMACfragNum - 2))
-					uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
-				else
-					uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
+				uNextPktTime = s_uGetTxRsvTime(pDevice,
+							       byPktType, len,
+							       wFB_Opt0[FB_RATE0][wRate - RATE_18M],
+							       bNeedAck);
+			} else {
+				uNextPktTime = s_uGetTxRsvTime(pDevice,
+							       byPktType, len,
+							       wFB_Opt1[FB_RATE0][wRate - RATE_18M],
+							       bNeedAck);
 			}
 
 			if (bNeedAck) {
-				uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
-				return pDevice->uSIFS + uAckTime + uNextPktTime;
-			} else {
-				return pDevice->uSIFS + uNextPktTime;
+				uAckTime = bb_get_frame_time(pDevice->byPreambleType,
+							     byPktType, 14,
+							     pDevice->byTopOFDMBasicRate);
 			}
+			return pDevice->uSIFS + uAckTime + uNextPktTime;
 		}
 		break;
 
 	case DATADUR_A_F1:    /* DATADUR_A_F1 */
 		if (((uMACfragNum == 1)) || bLastFrag) { /* Non Frag or Last Frag */
 			if (bNeedAck) {
-				uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+				uAckTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
 				return pDevice->uSIFS + uAckTime;
 			} else {
 				return 0;
 			}
 		} else { /* First Frag or Mid Frag */
+			if (wRate < RATE_18M)
+				wRate = RATE_18M;
+			else if (wRate > RATE_54M)
+				wRate = RATE_54M;
+
 			if (byFBOption == AUTO_FB_0) {
-				if (wRate < RATE_18M)
-					wRate = RATE_18M;
-				else if (wRate > RATE_54M)
-					wRate = RATE_54M;
-
-				if (uFragIdx == (uMACfragNum - 2))
-					uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
-				else
-					uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
-
-			} else { /* (byFBOption == AUTO_FB_1) */
-				if (wRate < RATE_18M)
-					wRate = RATE_18M;
-				else if (wRate > RATE_54M)
-					wRate = RATE_54M;
-
-				if (uFragIdx == (uMACfragNum - 2))
-					uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
-				else
-					uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
+				uNextPktTime = s_uGetTxRsvTime(pDevice,
+							       byPktType, len,
+							       wFB_Opt0[FB_RATE0][wRate - RATE_18M],
+							       bNeedAck);
+			} else {
+				uNextPktTime = s_uGetTxRsvTime(pDevice,
+							       byPktType, len,
+							       wFB_Opt1[FB_RATE0][wRate - RATE_18M],
+							       bNeedAck);
 			}
+
 			if (bNeedAck) {
-				uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
-				return pDevice->uSIFS + uAckTime + uNextPktTime;
-			} else {
-				return pDevice->uSIFS + uNextPktTime;
+				uAckTime = bb_get_frame_time(pDevice->byPreambleType,
+							     byPktType, 14,
+							     pDevice->byTopOFDMBasicRate);
 			}
+			return pDevice->uSIFS + uAckTime + uNextPktTime;
 		}
 		break;
 
@@ -396,17 +389,17 @@ s_uGetRTSCTSDuration(
 
 	switch (byDurType) {
 	case RTSDUR_BB:    /* RTSDuration_bb */
-		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+		uCTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
 		uDurTime = uCTSTime + 2 * pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
 		break;
 
 	case RTSDUR_BA:    /* RTSDuration_ba */
-		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+		uCTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
 		uDurTime = uCTSTime + 2 * pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
 		break;
 
 	case RTSDUR_AA:    /* RTSDuration_aa */
-		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+		uCTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
 		uDurTime = uCTSTime + 2 * pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
 		break;
 
@@ -415,7 +408,7 @@ s_uGetRTSCTSDuration(
 		break;
 
 	case RTSDUR_BA_F0: /* RTSDuration_ba_f0 */
-		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+		uCTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
 		if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <= RATE_54M))
 			uDurTime = uCTSTime + 2 * pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
 		else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <= RATE_54M))
@@ -424,7 +417,7 @@ s_uGetRTSCTSDuration(
 		break;
 
 	case RTSDUR_AA_F0: /* RTSDuration_aa_f0 */
-		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+		uCTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
 		if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <= RATE_54M))
 			uDurTime = uCTSTime + 2 * pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
 		else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <= RATE_54M))
@@ -433,7 +426,7 @@ s_uGetRTSCTSDuration(
 		break;
 
 	case RTSDUR_BA_F1: /* RTSDuration_ba_f1 */
-		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+		uCTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
 		if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <= RATE_54M))
 			uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
 		else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <= RATE_54M))
@@ -442,7 +435,7 @@ s_uGetRTSCTSDuration(
 		break;
 
 	case RTSDUR_AA_F1: /* RTSDuration_aa_f1 */
-		uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+		uCTSTime = bb_get_frame_time(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
 		if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <= RATE_54M))
 			uDurTime = uCTSTime + 2 * pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
 		else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <= RATE_54M))
@@ -1040,16 +1033,14 @@ s_cbFillTxBufHead(struct vnt_private *pDevice, unsigned char byPktType,
 	bool bRTS = (bool)(fifo_ctl & FIFOCTL_RTS);
 	struct vnt_tx_desc *ptdCurr;
 	unsigned int cbHeaderLength = 0;
-	void *pvRrvTime;
-	struct vnt_mic_hdr *pMICHDR;
-	void *pvRTS;
-	void *pvCTS;
-	void *pvTxDataHd;
+	void *pvRrvTime = NULL;
+	struct vnt_mic_hdr *pMICHDR = NULL;
+	void *pvRTS = NULL;
+	void *pvCTS = NULL;
+	void *pvTxDataHd = NULL;
 	unsigned short wTxBufSize;   /* FFinfo size */
 	unsigned char byFBOption = AUTO_FB_NONE;
 
-	pvRrvTime = pMICHDR = pvRTS = pvCTS = pvTxDataHd = NULL;
-
 	cbFrameSize = skb->len + 4;
 
 	if (info->control.hw_key) {
diff --git a/drivers/staging/vt6656/Makefile b/drivers/staging/vt6656/Makefile
index 375f54e9f58b..a0f3862dea75 100644
--- a/drivers/staging/vt6656/Makefile
+++ b/drivers/staging/vt6656/Makefile
@@ -13,7 +13,6 @@ vt6656_stage-y +=	main_usb.o \
 			key.o \
 			rf.o \
 			usbpipe.o \
-			channel.o \
-			firmware.o
+			channel.o
 
 obj-$(CONFIG_VT6656) +=	vt6656_stage.o
diff --git a/drivers/staging/vt6656/baseband.c b/drivers/staging/vt6656/baseband.c
index a19a563d8bcc..1d75acaec8f3 100644
--- a/drivers/staging/vt6656/baseband.c
+++ b/drivers/staging/vt6656/baseband.c
@@ -23,7 +23,9 @@
  */
 
 #include <linux/bits.h>
+#include <linux/errno.h>
 #include <linux/kernel.h>
+#include "device.h"
 #include "mac.h"
 #include "baseband.h"
 #include "rf.h"
@@ -111,198 +113,85 @@ static u8 vnt_vt3184_vt3226d0[] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00  /* 0xff */
 };
 
-static const u16 vnt_frame_time[MAX_RATE] = {
-	10, 20, 55, 110, 24, 36, 48, 72, 96, 144, 192, 216
+struct vnt_threshold {
+	u8 bb_pre_ed_rssi;
+	u8 cr_201;
+	u8 cr_206;
 };
 
-/*
- * Description: Calculate data frame transmitting time
- *
- * Parameters:
- *  In:
- *	preamble_type	- Preamble Type
- *	pkt_type	- PK_TYPE_11A, PK_TYPE_11B, PK_TYPE_11GB, PK_TYPE_11GA
- *	frame_length	- Baseband Type
- *	tx_rate		- Tx Rate
- *  Out:
- *
- * Return Value: FrameTime
- *
- */
-unsigned int vnt_get_frame_time(u8 preamble_type, u8 pkt_type,
-				unsigned int frame_length, u16 tx_rate)
-{
-	unsigned int frame_time;
-	unsigned int preamble;
-	unsigned int rate = 0;
-
-	if (tx_rate > RATE_54M)
-		return 0;
-
-	rate = (unsigned int)vnt_frame_time[tx_rate];
-
-	if (tx_rate <= 3) {
-		if (preamble_type == 1)
-			preamble = 96;
-		else
-			preamble = 192;
-
-		frame_time = DIV_ROUND_UP(frame_length * 80, rate);
-		return preamble + frame_time;
-	}
-
-	frame_time = DIV_ROUND_UP(frame_length * 8 + 22, rate);
-	frame_time = frame_time * 4;
-
-	if (pkt_type != PK_TYPE_11A)
-		frame_time += 6;
-	return 20 + frame_time;
-}
-
-/*
- * Description: Calculate Length, Service, and Signal fields of Phy for Tx
- *
- * Parameters:
- *  In:
- *      priv         - Device Structure
- *      frame_length   - Tx Frame Length
- *      tx_rate           - Tx Rate
- *  Out:
- *	struct vnt_phy_field *phy
- *		- pointer to Phy Length field
- *		- pointer to Phy Service field
- *		- pointer to Phy Signal field
- *
- * Return Value: none
- *
- */
-void vnt_get_phy_field(struct vnt_private *priv, u32 frame_length,
-		       u16 tx_rate, u8 pkt_type, struct vnt_phy_field *phy)
-{
-	u32 bit_count;
-	u32 count = 0;
-	u32 tmp;
-	int ext_bit;
-	u8 preamble_type = priv->preamble_type;
-
-	bit_count = frame_length * 8;
-	ext_bit = false;
-
-	switch (tx_rate) {
-	case RATE_1M:
-		count = bit_count;
-
-		phy->signal = 0x00;
-
-		break;
-	case RATE_2M:
-		count = bit_count / 2;
-
-		if (preamble_type == 1)
-			phy->signal = 0x09;
-		else
-			phy->signal = 0x01;
-
-		break;
-	case RATE_5M:
-		count = DIV_ROUND_UP(bit_count * 10, 55);
-
-		if (preamble_type == 1)
-			phy->signal = 0x0a;
-		else
-			phy->signal = 0x02;
-
-		break;
-	case RATE_11M:
-		count = bit_count / 11;
-		tmp = count * 11;
-
-		if (tmp != bit_count) {
-			count++;
-
-			if ((bit_count - tmp) <= 3)
-				ext_bit = true;
-		}
-
-		if (preamble_type == 1)
-			phy->signal = 0x0b;
-		else
-			phy->signal = 0x03;
-
-		break;
-	case RATE_6M:
-		if (pkt_type == PK_TYPE_11A)
-			phy->signal = 0x9b;
-		else
-			phy->signal = 0x8b;
-
-		break;
-	case RATE_9M:
-		if (pkt_type == PK_TYPE_11A)
-			phy->signal = 0x9f;
-		else
-			phy->signal = 0x8f;
-
-		break;
-	case RATE_12M:
-		if (pkt_type == PK_TYPE_11A)
-			phy->signal = 0x9a;
-		else
-			phy->signal = 0x8a;
-
-		break;
-	case RATE_18M:
-		if (pkt_type == PK_TYPE_11A)
-			phy->signal = 0x9e;
-		else
-			phy->signal = 0x8e;
-
-		break;
-	case RATE_24M:
-		if (pkt_type == PK_TYPE_11A)
-			phy->signal = 0x99;
-		else
-			phy->signal = 0x89;
-
-		break;
-	case RATE_36M:
-		if (pkt_type == PK_TYPE_11A)
-			phy->signal = 0x9d;
-		else
-			phy->signal = 0x8d;
-
-		break;
-	case RATE_48M:
-		if (pkt_type == PK_TYPE_11A)
-			phy->signal = 0x98;
-		else
-			phy->signal = 0x88;
+static const struct vnt_threshold al2230_vnt_threshold[] = {
+	{0, 0x00, 0x30},	/* Max sensitivity */
+	{68, 0x00, 0x36},
+	{67, 0x00, 0x43},
+	{66, 0x00, 0x51},
+	{65, 0x00, 0x62},
+	{64, 0x00, 0x79},
+	{63, 0x00, 0x93},
+	{62, 0x00, 0xb9},
+	{61, 0x00, 0xe3},
+	{60, 0x01, 0x18},
+	{59, 0x01, 0x54},
+	{58, 0x01, 0xa0},
+	{57, 0x02, 0x20},
+	{56, 0x02, 0xa0},
+	{55, 0x03, 0x00},
+	{53, 0x06, 0x00},
+	{51, 0x09, 0x00},
+	{49, 0x0e, 0x00},
+	{47, 0x15, 0x00},
+	{46, 0x1a, 0x00},
+	{45, 0xff, 0x00}
+};
 
-		break;
-	case RATE_54M:
-		if (pkt_type == PK_TYPE_11A)
-			phy->signal = 0x9c;
-		else
-			phy->signal = 0x8c;
-		break;
-	default:
-		if (pkt_type == PK_TYPE_11A)
-			phy->signal = 0x9c;
-		else
-			phy->signal = 0x8c;
-		break;
-	}
+static const struct vnt_threshold vt3226_vnt_threshold[] = {
+	{0, 0x00, 0x24},	/* Max sensitivity */
+	{68, 0x00, 0x2d},
+	{67, 0x00, 0x36},
+	{66, 0x00, 0x43},
+	{65, 0x00, 0x52},
+	{64, 0x00, 0x68},
+	{63, 0x00, 0x80},
+	{62, 0x00, 0x9c},
+	{61, 0x00, 0xc0},
+	{60, 0x00, 0xea},
+	{59, 0x01, 0x30},
+	{58, 0x01, 0x70},
+	{57, 0x01, 0xb0},
+	{56, 0x02, 0x30},
+	{55, 0x02, 0xc0},
+	{53, 0x04, 0x00},
+	{51, 0x07, 0x00},
+	{49, 0x0a, 0x00},
+	{47, 0x11, 0x00},
+	{45, 0x18, 0x00},
+	{43, 0x26, 0x00},
+	{42, 0x36, 0x00},
+	{41, 0xff, 0x00}
+};
 
-	if (pkt_type == PK_TYPE_11B) {
-		phy->service = 0x00;
-		if (ext_bit)
-			phy->service |= 0x80;
-		phy->len = cpu_to_le16((u16)count);
-	} else {
-		phy->service = 0x00;
-		phy->len = cpu_to_le16((u16)frame_length);
-	}
-}
+static const struct vnt_threshold vt3342_vnt_threshold[] = {
+	{0, 0x00, 0x38},	/* Max sensitivity */
+	{66, 0x00, 0x43},
+	{65, 0x00, 0x52},
+	{64, 0x00, 0x68},
+	{63, 0x00, 0x80},
+	{62, 0x00, 0x9c},
+	{61, 0x00, 0xc0},
+	{60, 0x00, 0xea},
+	{59, 0x01, 0x30},
+	{58, 0x01, 0x70},
+	{57, 0x01, 0xb0},
+	{56, 0x02, 0x30},
+	{55, 0x02, 0xc0},
+	{53, 0x04, 0x00},
+	{51, 0x07, 0x00},
+	{49, 0x0a, 0x00},
+	{47, 0x11, 0x00},
+	{45, 0x18, 0x00},
+	{43, 0x26, 0x00},
+	{42, 0x36, 0x00},
+	{41, 0xff, 0x00}
+};
 
 /*
  * Description: Set Antenna mode
@@ -352,7 +241,7 @@ int vnt_set_antenna_mode(struct vnt_private *priv, u8 antenna_mode)
 
 int vnt_vt3184_init(struct vnt_private *priv)
 {
-	int ret = 0;
+	int ret;
 	u16 length;
 	u8 *addr;
 	u8 data;
@@ -366,23 +255,15 @@ int vnt_vt3184_init(struct vnt_private *priv)
 
 	dev_dbg(&priv->usb->dev, "RF Type %d\n", priv->rf_type);
 
-	if (priv->rf_type == RF_AL2230 ||
-	    priv->rf_type == RF_AL2230S) {
+	if ((priv->rf_type == RF_AL2230) ||
+	    (priv->rf_type == RF_AL2230S) ||
+	    (priv->rf_type == RF_AIROHA7230)) {
 		priv->bb_rx_conf = vnt_vt3184_al2230[10];
 		length = sizeof(vnt_vt3184_al2230);
 		addr = vnt_vt3184_al2230;
 
-		priv->bb_vga[0] = 0x1C;
-		priv->bb_vga[1] = 0x10;
-		priv->bb_vga[2] = 0x0;
-		priv->bb_vga[3] = 0x0;
-
-	} else if (priv->rf_type == RF_AIROHA7230) {
-		priv->bb_rx_conf = vnt_vt3184_al2230[10];
-		length = sizeof(vnt_vt3184_al2230);
-		addr = vnt_vt3184_al2230;
-
-		addr[0xd7] = 0x06;
+		if (priv->rf_type == RF_AIROHA7230)
+			addr[0xd7] = 0x06;
 
 		priv->bb_vga[0] = 0x1c;
 		priv->bb_vga[1] = 0x10;
@@ -390,22 +271,8 @@ int vnt_vt3184_init(struct vnt_private *priv)
 		priv->bb_vga[3] = 0x0;
 
 	} else if ((priv->rf_type == RF_VT3226) ||
-			(priv->rf_type == RF_VT3226D0)) {
-		priv->bb_rx_conf = vnt_vt3184_vt3226d0[10];
-		length = sizeof(vnt_vt3184_vt3226d0);
-		addr = vnt_vt3184_vt3226d0;
-
-		priv->bb_vga[0] = 0x20;
-		priv->bb_vga[1] = 0x10;
-		priv->bb_vga[2] = 0x0;
-		priv->bb_vga[3] = 0x0;
-
-		/* Fix VT3226 DFC system timing issue */
-		ret = vnt_mac_reg_bits_on(priv, MAC_REG_SOFTPWRCTL2,
-					  SOFTPWRCTL_RFLEOPT);
-		if (ret)
-			goto end;
-	} else if (priv->rf_type == RF_VT3342A0) {
+		   (priv->rf_type == RF_VT3226D0) ||
+		   (priv->rf_type == RF_VT3342A0)) {
 		priv->bb_rx_conf = vnt_vt3184_vt3226d0[10];
 		length = sizeof(vnt_vt3184_vt3226d0);
 		addr = vnt_vt3184_vt3226d0;
@@ -435,19 +302,13 @@ int vnt_vt3184_init(struct vnt_private *priv)
 	if (ret)
 		goto end;
 
-	if (priv->rf_type == RF_VT3226 ||
-	    priv->rf_type == RF_VT3342A0) {
-		ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_MACREG,
-					 MAC_REG_ITRTMSET, 0x23);
-		if (ret)
-			goto end;
+	if ((priv->rf_type == RF_VT3226) ||
+	    (priv->rf_type == RF_VT3342A0) ||
+	    (priv->rf_type == RF_VT3226D0)) {
+		data = (priv->rf_type == RF_VT3226D0) ? 0x11 : 0x23;
 
-		ret = vnt_mac_reg_bits_on(priv, MAC_REG_PAPEDELAY, BIT(0));
-		if (ret)
-			goto end;
-	} else if (priv->rf_type == RF_VT3226D0) {
 		ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_MACREG,
-					 MAC_REG_ITRTMSET, 0x11);
+					 MAC_REG_ITRTMSET, data);
 		if (ret)
 			goto end;
 
@@ -507,21 +368,22 @@ int vnt_set_short_slot_time(struct vnt_private *priv)
 
 	ret = vnt_control_in_u8(priv, MESSAGE_REQUEST_BBREG, 0xe7, &bb_vga);
 	if (ret)
-		goto end;
+		return ret;
 
 	if (bb_vga == priv->bb_vga[0])
 		priv->bb_rx_conf |= 0x20;
 
-	ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x0a,
-				 priv->bb_rx_conf);
-
-end:
-	return ret;
+	return vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x0a,
+				  priv->bb_rx_conf);
 }
 
-void vnt_set_vga_gain_offset(struct vnt_private *priv, u8 data)
+int vnt_set_vga_gain_offset(struct vnt_private *priv, u8 data)
 {
-	vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0xE7, data);
+	int ret;
+
+	ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0xE7, data);
+	if (ret)
+		return ret;
 
 	/* patch for 3253B0 Baseband with Cardbus module */
 	if (priv->short_slot_time)
@@ -529,7 +391,8 @@ void vnt_set_vga_gain_offset(struct vnt_private *priv, u8 data)
 	else
 		priv->bb_rx_conf |= 0x20; /* 0010 0000 */
 
-	vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x0a, priv->bb_rx_conf);
+	return vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x0a,
+				  priv->bb_rx_conf);
 }
 
 /*
@@ -570,268 +433,57 @@ int vnt_exit_deep_sleep(struct vnt_private *priv)
 	return vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x0d, 0x01);
 }
 
-void vnt_update_pre_ed_threshold(struct vnt_private *priv, int scanning)
+int vnt_update_pre_ed_threshold(struct vnt_private *priv, int scanning)
 {
-	u8 cr_201 = 0x0, cr_206 = 0x0;
-	u8 ed_inx = priv->bb_pre_ed_index;
+	const struct vnt_threshold *threshold = NULL;
+	u8 length;
+	u8 cr_201, cr_206;
+	u8 ed_inx;
+	int ret;
 
 	switch (priv->rf_type) {
 	case RF_AL2230:
 	case RF_AL2230S:
 	case RF_AIROHA7230:
-		if (scanning) { /* Max sensitivity */
-			ed_inx = 0;
-			cr_206 = 0x30;
-			break;
-		}
-
-		if (priv->bb_pre_ed_rssi <= 45) {
-			ed_inx = 20;
-			cr_201 = 0xff;
-		} else if (priv->bb_pre_ed_rssi <= 46) {
-			ed_inx = 19;
-			cr_201 = 0x1a;
-		} else if (priv->bb_pre_ed_rssi <= 47) {
-			ed_inx = 18;
-			cr_201 = 0x15;
-		} else if (priv->bb_pre_ed_rssi <= 49) {
-			ed_inx = 17;
-			cr_201 = 0xe;
-		} else if (priv->bb_pre_ed_rssi <= 51) {
-			ed_inx = 16;
-			cr_201 = 0x9;
-		} else if (priv->bb_pre_ed_rssi <= 53) {
-			ed_inx = 15;
-			cr_201 = 0x6;
-		} else if (priv->bb_pre_ed_rssi <= 55) {
-			ed_inx = 14;
-			cr_201 = 0x3;
-		} else if (priv->bb_pre_ed_rssi <= 56) {
-			ed_inx = 13;
-			cr_201 = 0x2;
-			cr_206 = 0xa0;
-		} else if (priv->bb_pre_ed_rssi <= 57) {
-			ed_inx = 12;
-			cr_201 = 0x2;
-			cr_206 = 0x20;
-		} else if (priv->bb_pre_ed_rssi <= 58) {
-			ed_inx = 11;
-			cr_201 = 0x1;
-			cr_206 = 0xa0;
-		} else if (priv->bb_pre_ed_rssi <= 59) {
-			ed_inx = 10;
-			cr_201 = 0x1;
-			cr_206 = 0x54;
-		} else if (priv->bb_pre_ed_rssi <= 60) {
-			ed_inx = 9;
-			cr_201 = 0x1;
-			cr_206 = 0x18;
-		} else if (priv->bb_pre_ed_rssi <= 61) {
-			ed_inx = 8;
-			cr_206 = 0xe3;
-		} else if (priv->bb_pre_ed_rssi <= 62) {
-			ed_inx = 7;
-			cr_206 = 0xb9;
-		} else if (priv->bb_pre_ed_rssi <= 63) {
-			ed_inx = 6;
-			cr_206 = 0x93;
-		} else if (priv->bb_pre_ed_rssi <= 64) {
-			ed_inx = 5;
-			cr_206 = 0x79;
-		} else if (priv->bb_pre_ed_rssi <= 65) {
-			ed_inx = 4;
-			cr_206 = 0x62;
-		} else if (priv->bb_pre_ed_rssi <= 66) {
-			ed_inx = 3;
-			cr_206 = 0x51;
-		} else if (priv->bb_pre_ed_rssi <= 67) {
-			ed_inx = 2;
-			cr_206 = 0x43;
-		} else if (priv->bb_pre_ed_rssi <= 68) {
-			ed_inx = 1;
-			cr_206 = 0x36;
-		} else {
-			ed_inx = 0;
-			cr_206 = 0x30;
-		}
+		threshold = al2230_vnt_threshold;
+		length = ARRAY_SIZE(al2230_vnt_threshold);
 		break;
 
 	case RF_VT3226:
 	case RF_VT3226D0:
-		if (scanning)	{ /* Max sensitivity */
-			ed_inx = 0;
-			cr_206 = 0x24;
-			break;
-		}
-
-		if (priv->bb_pre_ed_rssi <= 41) {
-			ed_inx = 22;
-			cr_201 = 0xff;
-		} else if (priv->bb_pre_ed_rssi <= 42) {
-			ed_inx = 21;
-			cr_201 = 0x36;
-		} else if (priv->bb_pre_ed_rssi <= 43) {
-			ed_inx = 20;
-			cr_201 = 0x26;
-		} else if (priv->bb_pre_ed_rssi <= 45) {
-			ed_inx = 19;
-			cr_201 = 0x18;
-		} else if (priv->bb_pre_ed_rssi <= 47) {
-			ed_inx = 18;
-			cr_201 = 0x11;
-		} else if (priv->bb_pre_ed_rssi <= 49) {
-			ed_inx = 17;
-			cr_201 = 0xa;
-		} else if (priv->bb_pre_ed_rssi <= 51) {
-			ed_inx = 16;
-			cr_201 = 0x7;
-		} else if (priv->bb_pre_ed_rssi <= 53) {
-			ed_inx = 15;
-			cr_201 = 0x4;
-		} else if (priv->bb_pre_ed_rssi <= 55) {
-			ed_inx = 14;
-			cr_201 = 0x2;
-			cr_206 = 0xc0;
-		} else if (priv->bb_pre_ed_rssi <= 56) {
-			ed_inx = 13;
-			cr_201 = 0x2;
-			cr_206 = 0x30;
-		} else if (priv->bb_pre_ed_rssi <= 57) {
-			ed_inx = 12;
-			cr_201 = 0x1;
-			cr_206 = 0xb0;
-		} else if (priv->bb_pre_ed_rssi <= 58) {
-			ed_inx = 11;
-			cr_201 = 0x1;
-			cr_206 = 0x70;
-		} else if (priv->bb_pre_ed_rssi <= 59) {
-			ed_inx = 10;
-			cr_201 = 0x1;
-			cr_206 = 0x30;
-		} else if (priv->bb_pre_ed_rssi <= 60) {
-			ed_inx = 9;
-			cr_206 = 0xea;
-		} else if (priv->bb_pre_ed_rssi <= 61) {
-			ed_inx = 8;
-			cr_206 = 0xc0;
-		} else if (priv->bb_pre_ed_rssi <= 62) {
-			ed_inx = 7;
-			cr_206 = 0x9c;
-		} else if (priv->bb_pre_ed_rssi <= 63) {
-			ed_inx = 6;
-			cr_206 = 0x80;
-		} else if (priv->bb_pre_ed_rssi <= 64) {
-			ed_inx = 5;
-			cr_206 = 0x68;
-		} else if (priv->bb_pre_ed_rssi <= 65) {
-			ed_inx = 4;
-			cr_206 = 0x52;
-		} else if (priv->bb_pre_ed_rssi <= 66) {
-			ed_inx = 3;
-			cr_206 = 0x43;
-		} else if (priv->bb_pre_ed_rssi <= 67) {
-			ed_inx = 2;
-			cr_206 = 0x36;
-		} else if (priv->bb_pre_ed_rssi <= 68) {
-			ed_inx = 1;
-			cr_206 = 0x2d;
-		} else {
-			ed_inx = 0;
-			cr_206 = 0x24;
-		}
+		threshold = vt3226_vnt_threshold;
+		length = ARRAY_SIZE(vt3226_vnt_threshold);
 		break;
 
 	case RF_VT3342A0:
-		if (scanning) { /* need Max sensitivity */
-			ed_inx = 0;
-			cr_206 = 0x38;
-			break;
-		}
-
-		if (priv->bb_pre_ed_rssi <= 41) {
-			ed_inx = 20;
-			cr_201 = 0xff;
-		} else if (priv->bb_pre_ed_rssi <= 42) {
-			ed_inx = 19;
-			cr_201 = 0x36;
-		} else if (priv->bb_pre_ed_rssi <= 43) {
-			ed_inx = 18;
-			cr_201 = 0x26;
-		} else if (priv->bb_pre_ed_rssi <= 45) {
-			ed_inx = 17;
-			cr_201 = 0x18;
-		} else if (priv->bb_pre_ed_rssi <= 47) {
-			ed_inx = 16;
-			cr_201 = 0x11;
-		} else if (priv->bb_pre_ed_rssi <= 49) {
-			ed_inx = 15;
-			cr_201 = 0xa;
-		} else if (priv->bb_pre_ed_rssi <= 51) {
-			ed_inx = 14;
-			cr_201 = 0x7;
-		} else if (priv->bb_pre_ed_rssi <= 53) {
-			ed_inx = 13;
-			cr_201 = 0x4;
-		} else if (priv->bb_pre_ed_rssi <= 55) {
-			ed_inx = 12;
-			cr_201 = 0x2;
-			cr_206 = 0xc0;
-		} else if (priv->bb_pre_ed_rssi <= 56) {
-			ed_inx = 11;
-			cr_201 = 0x2;
-			cr_206 = 0x30;
-		} else if (priv->bb_pre_ed_rssi <= 57) {
-			ed_inx = 10;
-			cr_201 = 0x1;
-			cr_206 = 0xb0;
-		} else if (priv->bb_pre_ed_rssi <= 58) {
-			ed_inx = 9;
-			cr_201 = 0x1;
-			cr_206 = 0x70;
-		} else if (priv->bb_pre_ed_rssi <= 59) {
-			ed_inx = 8;
-			cr_201 = 0x1;
-			cr_206 = 0x30;
-		} else if (priv->bb_pre_ed_rssi <= 60) {
-			ed_inx = 7;
-			cr_206 = 0xea;
-		} else if (priv->bb_pre_ed_rssi <= 61) {
-			ed_inx = 6;
-			cr_206 = 0xc0;
-		} else if (priv->bb_pre_ed_rssi <= 62) {
-			ed_inx = 5;
-			cr_206 = 0x9c;
-		} else if (priv->bb_pre_ed_rssi <= 63) {
-			ed_inx = 4;
-			cr_206 = 0x80;
-		} else if (priv->bb_pre_ed_rssi <= 64) {
-			ed_inx = 3;
-			cr_206 = 0x68;
-		} else if (priv->bb_pre_ed_rssi <= 65) {
-			ed_inx = 2;
-			cr_206 = 0x52;
-		} else if (priv->bb_pre_ed_rssi <= 66) {
-			ed_inx = 1;
-			cr_206 = 0x43;
-		} else {
-			ed_inx = 0;
-			cr_206 = 0x38;
-		}
+		threshold = vt3342_vnt_threshold;
+		length = ARRAY_SIZE(vt3342_vnt_threshold);
 		break;
 	}
 
+	if (!threshold)
+		return -EINVAL;
+
+	for (ed_inx = scanning ? 0 : length - 1; ed_inx > 0; ed_inx--) {
+		if (priv->bb_pre_ed_rssi <= threshold[ed_inx].bb_pre_ed_rssi)
+			break;
+	}
+
+	cr_201 = threshold[ed_inx].cr_201;
+	cr_206 = threshold[ed_inx].cr_206;
+
 	if (ed_inx == priv->bb_pre_ed_index && !scanning)
-		return;
+		return 0;
 
 	priv->bb_pre_ed_index = ed_inx;
 
 	dev_dbg(&priv->usb->dev, "%s bb_pre_ed_rssi %d\n",
 		__func__, priv->bb_pre_ed_rssi);
 
-	if (!cr_201 && !cr_206)
-		return;
+	ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0xc9, cr_201);
+	if (ret)
+		return ret;
 
-	vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0xc9, cr_201);
-	vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0xce, cr_206);
+	return vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0xce, cr_206);
 }
 
diff --git a/drivers/staging/vt6656/baseband.h b/drivers/staging/vt6656/baseband.h
index dc42aa6ae1d9..12456ebc23ec 100644
--- a/drivers/staging/vt6656/baseband.h
+++ b/drivers/staging/vt6656/baseband.h
@@ -66,25 +66,12 @@
 #define TOP_RATE_2M         0x00200000
 #define TOP_RATE_1M         0x00100000
 
-/* Length, Service, and Signal fields of Phy for Tx */
-struct vnt_phy_field {
-	u8 signal;
-	u8 service;
-	__le16 len;
-} __packed;
-
-unsigned int vnt_get_frame_time(u8 preamble_type, u8 pkt_type,
-				unsigned int frame_length, u16 tx_rate);
-
-void vnt_get_phy_field(struct vnt_private *priv, u32 frame_length,
-		       u16 tx_rate, u8 pkt_type, struct vnt_phy_field *phy);
-
 int vnt_set_short_slot_time(struct vnt_private *priv);
-void vnt_set_vga_gain_offset(struct vnt_private *priv, u8 data);
+int vnt_set_vga_gain_offset(struct vnt_private *priv, u8 data);
 int vnt_set_antenna_mode(struct vnt_private *priv, u8 antenna_mode);
 int vnt_vt3184_init(struct vnt_private *priv);
 int vnt_set_deep_sleep(struct vnt_private *priv);
 int vnt_exit_deep_sleep(struct vnt_private *priv);
-void vnt_update_pre_ed_threshold(struct vnt_private *priv, int scanning);
+int vnt_update_pre_ed_threshold(struct vnt_private *priv, int scanning);
 
 #endif /* __BASEBAND_H__ */
diff --git a/drivers/staging/vt6656/card.c b/drivers/staging/vt6656/card.c
index dc3ab10eb630..872717f9df49 100644
--- a/drivers/staging/vt6656/card.c
+++ b/drivers/staging/vt6656/card.c
@@ -26,7 +26,8 @@
  *
  */
 
-#include <linux/bits.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
 #include "device.h"
 #include "card.h"
 #include "baseband.h"
@@ -45,20 +46,12 @@ static const u16 cw_rxbcntsf_off[MAX_RATE] = {
 	192, 96, 34, 17, 34, 23, 17, 11, 8, 5, 4, 3
 };
 
-/*
- * Description: Set NIC media channel
- *
- * Parameters:
- *  In:
- *      pDevice             - The adapter to be set
- *      connection_channel  - Channel to be set
- *  Out:
- *      none
- */
-void vnt_set_channel(struct vnt_private *priv, u32 connection_channel)
+int vnt_set_channel(struct vnt_private *priv, u32 connection_channel)
 {
+	int ret;
+
 	if (connection_channel > CB_MAX_CHANNEL || !connection_channel)
-		return;
+		return -EINVAL;
 
 	/* clear NAV */
 	vnt_mac_reg_bits_on(priv, MAC_REG_MACCR, MACCR_CLRNAV);
@@ -67,284 +60,73 @@ void vnt_set_channel(struct vnt_private *priv, u32 connection_channel)
 	vnt_mac_reg_bits_off(priv, MAC_REG_CHANNEL,
 			     (BIT(7) | BIT(5) | BIT(4)));
 
-	vnt_control_out(priv, MESSAGE_TYPE_SELECT_CHANNEL,
-			connection_channel, 0, 0, NULL);
-
-	vnt_control_out_u8(priv, MESSAGE_REQUEST_MACREG, MAC_REG_CHANNEL,
-			   (u8)(connection_channel | 0x80));
-}
-
-/*
- * Description: Get CCK mode basic rate
- *
- * Parameters:
- *  In:
- *      priv		- The adapter to be set
- *      rate_idx	- Receiving data rate
- *  Out:
- *      none
- *
- * Return Value: response Control frame rate
- *
- */
-static u16 vnt_get_cck_rate(struct vnt_private *priv, u16 rate_idx)
-{
-	u16 ui = rate_idx;
-
-	while (ui > RATE_1M) {
-		if (priv->basic_rates & (1 << ui))
-			return ui;
-		ui--;
-	}
+	ret = vnt_control_out(priv, MESSAGE_TYPE_SELECT_CHANNEL,
+			      connection_channel, 0, 0, NULL);
+	if (ret)
+		return ret;
 
-	return RATE_1M;
+	return vnt_control_out_u8(priv, MESSAGE_REQUEST_MACREG, MAC_REG_CHANNEL,
+				  (u8)(connection_channel | 0x80));
 }
 
-/*
- * Description: Get OFDM mode basic rate
- *
- * Parameters:
- *  In:
- *      priv		- The adapter to be set
- *      rate_idx	- Receiving data rate
- *  Out:
- *      none
- *
- * Return Value: response Control frame rate
- *
- */
-static u16 vnt_get_ofdm_rate(struct vnt_private *priv, u16 rate_idx)
-{
-	u16 ui = rate_idx;
-
-	dev_dbg(&priv->usb->dev, "%s basic rate: %d\n",
-		__func__,  priv->basic_rates);
-
-	if (!vnt_ofdm_min_rate(priv)) {
-		dev_dbg(&priv->usb->dev, "%s (NO OFDM) %d\n",
-			__func__, rate_idx);
-		if (rate_idx > RATE_24M)
-			rate_idx = RATE_24M;
-		return rate_idx;
-	}
-
-	while (ui > RATE_11M) {
-		if (priv->basic_rates & (1 << ui)) {
-			dev_dbg(&priv->usb->dev, "%s rate: %d\n",
-				__func__, ui);
-			return ui;
-		}
-		ui--;
-	}
-
-	dev_dbg(&priv->usb->dev, "%s basic rate: 24M\n", __func__);
+static const u8 vnt_rspinf_b_short_table[] = {
+	0x70, 0x00, 0x00, 0x00, 0x38, 0x00, 0x09, 0x00,
+	0x15, 0x00, 0x0a, 0x00, 0x0b, 0x00, 0x0b, 0x80
+};
 
-	return RATE_24M;
-}
+static const u8 vnt_rspinf_b_long_table[] = {
+	0x70, 0x00, 0x00, 0x00, 0x38, 0x00, 0x01, 0x00,
+	0x15, 0x00, 0x02, 0x00, 0x0b, 0x00, 0x03, 0x80
+};
 
-/*
- * Description: Calculate TxRate and RsvTime fields for RSPINF in OFDM mode.
- *
- * Parameters:
- * In:
- *	rate	- Tx Rate
- *	bb_type	- Tx Packet type
- * Out:
- *	tx_rate	- pointer to RSPINF TxRate field
- *	rsv_time- pointer to RSPINF RsvTime field
- *
- * Return Value: none
- *
- */
-static void vnt_calculate_ofdm_rate(u16 rate, u8 bb_type,
-				    u8 *tx_rate, u8 *rsv_time)
-{
-	switch (rate) {
-	case RATE_6M:
-		if (bb_type == BB_TYPE_11A) {
-			*tx_rate = 0x9b;
-			*rsv_time = 24;
-		} else {
-			*tx_rate = 0x8b;
-			*rsv_time = 30;
-		}
-		break;
-	case RATE_9M:
-		if (bb_type == BB_TYPE_11A) {
-			*tx_rate = 0x9f;
-			*rsv_time = 16;
-		} else {
-			*tx_rate = 0x8f;
-			*rsv_time = 22;
-		}
-		break;
-	case RATE_12M:
-		if (bb_type == BB_TYPE_11A) {
-			*tx_rate = 0x9a;
-			*rsv_time = 12;
-		} else {
-			*tx_rate = 0x8a;
-			*rsv_time = 18;
-		}
-		break;
-	case RATE_18M:
-		if (bb_type == BB_TYPE_11A) {
-			*tx_rate = 0x9e;
-			*rsv_time = 8;
-		} else {
-			*tx_rate = 0x8e;
-			*rsv_time = 14;
-		}
-		break;
-	case RATE_36M:
-		if (bb_type == BB_TYPE_11A) {
-			*tx_rate = 0x9d;
-			*rsv_time = 4;
-		} else {
-			*tx_rate = 0x8d;
-			*rsv_time = 10;
-		}
-		break;
-	case RATE_48M:
-		if (bb_type == BB_TYPE_11A) {
-			*tx_rate = 0x98;
-			*rsv_time = 4;
-		} else {
-			*tx_rate = 0x88;
-			*rsv_time = 10;
-		}
-		break;
-	case RATE_54M:
-		if (bb_type == BB_TYPE_11A) {
-			*tx_rate = 0x9c;
-			*rsv_time = 4;
-		} else {
-			*tx_rate = 0x8c;
-			*rsv_time = 10;
-		}
-		break;
-	case RATE_24M:
-	default:
-		if (bb_type == BB_TYPE_11A) {
-			*tx_rate = 0x99;
-			*rsv_time = 8;
-		} else {
-			*tx_rate = 0x89;
-			*rsv_time = 14;
-		}
-		break;
-	}
-}
+static const u8 vnt_rspinf_a_table[] = {
+	0x9b, 0x18, 0x9f, 0x10, 0x9a, 0x0a, 0x9e, 0x08, 0x99,
+	0x08, 0x9d, 0x04, 0x98, 0x04, 0x9c, 0x04, 0x9c, 0x04
+};
 
-/*
- * Description: Set RSPINF
- *
- * Parameters:
- *  In:
- *      pDevice             - The adapter to be set
- *  Out:
- *      none
- *
- * Return Value: None.
- *
- */
+static const u8 vnt_rspinf_gb_table[] = {
+	0x8b, 0x1e, 0x8f, 0x16, 0x8a, 0x12, 0x8e, 0x0e, 0x89,
+	0x0e, 0x8d, 0x0a, 0x88, 0x0a, 0x8c, 0x0a, 0x8c, 0x0a
+};
 
-void vnt_set_rspinf(struct vnt_private *priv, u8 bb_type)
+int vnt_set_rspinf(struct vnt_private *priv, u8 bb_type)
 {
-	struct vnt_phy_field phy[4];
-	u8 tx_rate[9] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; /* For OFDM */
-	u8 rsv_time[9] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
-	u8 data[34];
-	int i;
-
-	/*RSPINF_b_1*/
-	vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_1M),
-			  PK_TYPE_11B, &phy[0]);
-
-	/*RSPINF_b_2*/
-	vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_2M),
-			  PK_TYPE_11B, &phy[1]);
-
-	/*RSPINF_b_5*/
-	vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_5M),
-			  PK_TYPE_11B, &phy[2]);
-
-	/*RSPINF_b_11*/
-	vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_11M),
-			  PK_TYPE_11B, &phy[3]);
-
-	/*RSPINF_a_6*/
-	vnt_calculate_ofdm_rate(RATE_6M, bb_type, &tx_rate[0], &rsv_time[0]);
-
-	/*RSPINF_a_9*/
-	vnt_calculate_ofdm_rate(RATE_9M, bb_type, &tx_rate[1], &rsv_time[1]);
+	const u8 *data;
+	u16 len;
+	int ret;
 
-	/*RSPINF_a_12*/
-	vnt_calculate_ofdm_rate(RATE_12M, bb_type, &tx_rate[2], &rsv_time[2]);
-
-	/*RSPINF_a_18*/
-	vnt_calculate_ofdm_rate(RATE_18M, bb_type, &tx_rate[3], &rsv_time[3]);
-
-	/*RSPINF_a_24*/
-	vnt_calculate_ofdm_rate(RATE_24M, bb_type, &tx_rate[4], &rsv_time[4]);
-
-	/*RSPINF_a_36*/
-	vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_36M),
-				bb_type, &tx_rate[5], &rsv_time[5]);
-
-	/*RSPINF_a_48*/
-	vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_48M),
-				bb_type, &tx_rate[6], &rsv_time[6]);
-
-	/*RSPINF_a_54*/
-	vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_54M),
-				bb_type, &tx_rate[7], &rsv_time[7]);
-
-	/*RSPINF_a_72*/
-	vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_54M),
-				bb_type, &tx_rate[8], &rsv_time[8]);
-
-	put_unaligned(phy[0].len, (u16 *)&data[0]);
-	data[2] = phy[0].signal;
-	data[3] = phy[0].service;
-
-	put_unaligned(phy[1].len, (u16 *)&data[4]);
-	data[6] = phy[1].signal;
-	data[7] = phy[1].service;
-
-	put_unaligned(phy[2].len, (u16 *)&data[8]);
-	data[10] = phy[2].signal;
-	data[11] = phy[2].service;
+	if (priv->preamble_type) {
+		data = vnt_rspinf_b_short_table;
+		len = ARRAY_SIZE(vnt_rspinf_b_short_table);
+	} else {
+		data = vnt_rspinf_b_long_table;
+		len = ARRAY_SIZE(vnt_rspinf_b_long_table);
+	}
 
-	put_unaligned(phy[3].len, (u16 *)&data[12]);
-	data[14] = phy[3].signal;
-	data[15] = phy[3].service;
+	 /* RSPINF_b_1 to RSPINF_b_11 */
+	ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_RSPINF_B_1,
+			      MESSAGE_REQUEST_MACREG, len, data);
+	if (ret)
+		return ret;
 
-	for (i = 0; i < 9; i++) {
-		data[16 + i * 2] = tx_rate[i];
-		data[16 + i * 2 + 1] = rsv_time[i];
+	if (bb_type == BB_TYPE_11A) {
+		data = vnt_rspinf_a_table;
+		len = ARRAY_SIZE(vnt_rspinf_a_table);
+	} else {
+		data = vnt_rspinf_gb_table;
+		len = ARRAY_SIZE(vnt_rspinf_gb_table);
 	}
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_RSPINF_B_1,
-			MESSAGE_REQUEST_MACREG, 34, &data[0]);
+	/* RSPINF_a_6 to RSPINF_a_72 */
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_RSPINF_A_6,
+			       MESSAGE_REQUEST_MACREG, len, data);
 }
 
-/*
- * Description: Update IFS
- *
- * Parameters:
- *  In:
- *	priv - The adapter to be set
- * Out:
- *	none
- *
- * Return Value: None.
- *
- */
-void vnt_update_ifs(struct vnt_private *priv)
+int vnt_update_ifs(struct vnt_private *priv)
 {
 	u8 max_min = 0;
 	u8 data[4];
+	int ret;
 
 	if (priv->packet_type == PK_TYPE_11A) {
 		priv->slot = C_SLOT_SHORT;
@@ -404,52 +186,31 @@ void vnt_update_ifs(struct vnt_private *priv)
 	data[2] = (u8)priv->eifs;
 	data[3] = (u8)priv->slot;
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_SIFS,
-			MESSAGE_REQUEST_MACREG, 4, &data[0]);
+	ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_SIFS,
+			      MESSAGE_REQUEST_MACREG, 4, &data[0]);
+	if (ret)
+		return ret;
 
 	max_min |= 0xa0;
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_CWMAXMIN0,
-			MESSAGE_REQUEST_MACREG, 1, &max_min);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_CWMAXMIN0,
+			       MESSAGE_REQUEST_MACREG, 1, &max_min);
 }
 
 void vnt_update_top_rates(struct vnt_private *priv)
 {
-	u8 top_ofdm = RATE_24M, top_cck = RATE_1M;
-	u8 i;
+	int pos;
 
-	/*Determines the highest basic rate.*/
-	for (i = RATE_54M; i >= RATE_6M; i--) {
-		if (priv->basic_rates & (u16)(1 << i)) {
-			top_ofdm = i;
-			break;
-		}
-	}
-
-	priv->top_ofdm_basic_rate = top_ofdm;
-
-	for (i = RATE_11M;; i--) {
-		if (priv->basic_rates & (u16)(1 << i)) {
-			top_cck = i;
-			break;
-		}
-		if (i == RATE_1M)
-			break;
-	}
+	pos = fls(priv->basic_rates & GENMASK(RATE_54M, RATE_6M));
+	priv->top_ofdm_basic_rate = pos ? (pos - 1) : RATE_24M;
 
-	priv->top_cck_basic_rate = top_cck;
+	pos = fls(priv->basic_rates & GENMASK(RATE_11M, RATE_1M));
+	priv->top_cck_basic_rate = pos ? (pos - 1) : RATE_1M;
 }
 
-int vnt_ofdm_min_rate(struct vnt_private *priv)
+bool vnt_ofdm_min_rate(struct vnt_private *priv)
 {
-	int ii;
-
-	for (ii = RATE_54M; ii >= RATE_6M; ii--) {
-		if ((priv->basic_rates) & ((u16)BIT(ii)))
-			return true;
-	}
-
-	return false;
+	return priv->basic_rates & GENMASK(RATE_54M, RATE_6M) ? true : false;
 }
 
 u8 vnt_get_pkt_type(struct vnt_private *priv)
@@ -481,23 +242,8 @@ u64 vnt_get_tsf_offset(u8 rx_rate, u64 tsf1, u64 tsf2)
 	return tsf1 - tsf2 - (u64)cw_rxbcntsf_off[rx_rate % MAX_RATE];
 }
 
-/*
- * Description: Sync. TSF counter to BSS
- *              Get TSF offset and write to HW
- *
- * Parameters:
- *  In:
- *      priv		- The adapter to be sync.
- *      time_stamp	- Rx BCN's TSF
- *      local_tsf	- Local TSF
- *  Out:
- *      none
- *
- * Return Value: none
- *
- */
-void vnt_adjust_tsf(struct vnt_private *priv, u8 rx_rate,
-		    u64 time_stamp, u64 local_tsf)
+int vnt_adjust_tsf(struct vnt_private *priv, u8 rx_rate,
+		   u64 time_stamp, u64 local_tsf)
 {
 	u64 tsf_offset = 0;
 	u8 data[8];
@@ -513,8 +259,8 @@ void vnt_adjust_tsf(struct vnt_private *priv, u8 rx_rate,
 	data[6] = (u8)(tsf_offset >> 48);
 	data[7] = (u8)(tsf_offset >> 56);
 
-	vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
-			MESSAGE_REQUEST_TSF, 0, 8, data);
+	return vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
+			       MESSAGE_REQUEST_TSF, 0, 8, data);
 }
 
 /*
@@ -589,21 +335,7 @@ u64 vnt_get_next_tbtt(u64 tsf, u16 beacon_interval)
 	return tsf;
 }
 
-/*
- * Description: Set NIC TSF counter for first Beacon time
- *              Get NEXTTBTT from adjusted TSF and Beacon Interval
- *
- * Parameters:
- *  In:
- *      dwIoBase        - IO Base
- *	beacon_interval - Beacon Interval
- *  Out:
- *      none
- *
- * Return Value: none
- *
- */
-void vnt_reset_next_tbtt(struct vnt_private *priv, u16 beacon_interval)
+int vnt_reset_next_tbtt(struct vnt_private *priv, u16 beacon_interval)
 {
 	u64 next_tbtt = 0;
 	u8 data[8];
@@ -621,29 +353,15 @@ void vnt_reset_next_tbtt(struct vnt_private *priv, u16 beacon_interval)
 	data[6] = (u8)(next_tbtt >> 48);
 	data[7] = (u8)(next_tbtt >> 56);
 
-	vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
-			MESSAGE_REQUEST_TBTT, 0, 8, data);
+	return vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
+			       MESSAGE_REQUEST_TBTT, 0, 8, data);
 }
 
-/*
- * Description: Sync NIC TSF counter for Beacon time
- *              Get NEXTTBTT and write to HW
- *
- * Parameters:
- *  In:
- *	priv		- The adapter to be set
- *      tsf		- Current TSF counter
- *      beacon_interval - Beacon Interval
- *  Out:
- *      none
- *
- * Return Value: none
- *
- */
-void vnt_update_next_tbtt(struct vnt_private *priv, u64 tsf,
-			  u16 beacon_interval)
+int vnt_update_next_tbtt(struct vnt_private *priv, u64 tsf,
+			 u16 beacon_interval)
 {
 	u8 data[8];
+	int ret;
 
 	tsf = vnt_get_next_tbtt(tsf, beacon_interval);
 
@@ -656,10 +374,13 @@ void vnt_update_next_tbtt(struct vnt_private *priv, u64 tsf,
 	data[6] = (u8)(tsf >> 48);
 	data[7] = (u8)(tsf >> 56);
 
-	vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
-			MESSAGE_REQUEST_TBTT, 0, 8, data);
+	ret = vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
+			      MESSAGE_REQUEST_TBTT, 0, 8, data);
+	if (ret)
+		return ret;
 
 	dev_dbg(&priv->usb->dev, "%s TBTT: %8llx\n", __func__, tsf);
+	return 0;
 }
 
 /*
@@ -723,9 +444,13 @@ int vnt_radio_power_on(struct vnt_private *priv)
 {
 	int ret = 0;
 
-	vnt_exit_deep_sleep(priv);
+	ret = vnt_exit_deep_sleep(priv);
+	if (ret)
+		return ret;
 
-	vnt_mac_reg_bits_on(priv, MAC_REG_HOSTCR, HOSTCR_RXON);
+	ret = vnt_mac_reg_bits_on(priv, MAC_REG_HOSTCR, HOSTCR_RXON);
+	if (ret)
+		return ret;
 
 	switch (priv->rf_type) {
 	case RF_AL2230:
@@ -734,18 +459,20 @@ int vnt_radio_power_on(struct vnt_private *priv)
 	case RF_VT3226:
 	case RF_VT3226D0:
 	case RF_VT3342A0:
-		vnt_mac_reg_bits_on(priv, MAC_REG_SOFTPWRCTL,
-				    (SOFTPWRCTL_SWPE2 | SOFTPWRCTL_SWPE3));
-		break;
+		ret = vnt_mac_reg_bits_on(priv, MAC_REG_SOFTPWRCTL,
+					  (SOFTPWRCTL_SWPE2 |
+					   SOFTPWRCTL_SWPE3));
+		if (ret)
+			return ret;
 	}
 
-	vnt_mac_reg_bits_off(priv, MAC_REG_GPIOCTL1, GPIO3_INTMD);
-
-	return ret;
+	return vnt_mac_reg_bits_off(priv, MAC_REG_GPIOCTL1, GPIO3_INTMD);
 }
 
-void vnt_set_bss_mode(struct vnt_private *priv)
+int vnt_set_bss_mode(struct vnt_private *priv)
 {
+	int ret = 0;
+
 	if (priv->rf_type == RF_AIROHA7230 && priv->bb_type == BB_TYPE_11A)
 		vnt_mac_set_bb_type(priv, BB_TYPE_11G);
 	else
@@ -754,11 +481,16 @@ void vnt_set_bss_mode(struct vnt_private *priv)
 	priv->packet_type = vnt_get_pkt_type(priv);
 
 	if (priv->bb_type == BB_TYPE_11A)
-		vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x88, 0x03);
+		ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
+					 0x88, 0x03);
 	else if (priv->bb_type == BB_TYPE_11B)
-		vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x88, 0x02);
+		ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
+					 0x88, 0x02);
 	else if (priv->bb_type == BB_TYPE_11G)
-		vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x88, 0x08);
+		ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
+					 0x88, 0x08);
+	if (ret)
+		return ret;
 
 	vnt_update_ifs(priv);
 	vnt_set_rspinf(priv, (u8)priv->bb_type);
@@ -767,8 +499,10 @@ void vnt_set_bss_mode(struct vnt_private *priv)
 		if (priv->rf_type == RF_AIROHA7230) {
 			priv->bb_vga[0] = 0x20;
 
-			vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
-					   0xe7, priv->bb_vga[0]);
+			ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
+						 0xe7, priv->bb_vga[0]);
+			if (ret)
+				return ret;
 		}
 
 		priv->bb_vga[2] = 0x10;
@@ -777,8 +511,10 @@ void vnt_set_bss_mode(struct vnt_private *priv)
 		if (priv->rf_type == RF_AIROHA7230) {
 			priv->bb_vga[0] = 0x1c;
 
-			vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
-					   0xe7, priv->bb_vga[0]);
+			ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
+						 0xe7, priv->bb_vga[0]);
+			if (ret)
+				return ret;
 		}
 
 		priv->bb_vga[2] = 0x0;
@@ -786,4 +522,5 @@ void vnt_set_bss_mode(struct vnt_private *priv)
 	}
 
 	vnt_set_vga_gain_offset(priv, priv->bb_vga[0]);
+	return 0;
 }
diff --git a/drivers/staging/vt6656/card.h b/drivers/staging/vt6656/card.h
index 75cd340c0cce..a524fdc60ae3 100644
--- a/drivers/staging/vt6656/card.h
+++ b/drivers/staging/vt6656/card.h
@@ -25,23 +25,23 @@
 
 struct vnt_private;
 
-void vnt_set_channel(struct vnt_private *priv, u32 connection_channel);
-void vnt_set_rspinf(struct vnt_private *priv, u8 bb_type);
-void vnt_update_ifs(struct vnt_private *priv);
+int vnt_set_channel(struct vnt_private *priv, u32 connection_channel);
+int vnt_set_rspinf(struct vnt_private *priv, u8 bb_type);
+int vnt_update_ifs(struct vnt_private *priv);
 void vnt_update_top_rates(struct vnt_private *priv);
-int vnt_ofdm_min_rate(struct vnt_private *priv);
-void vnt_adjust_tsf(struct vnt_private *priv, u8 rx_rate,
-		    u64 time_stamp, u64 local_tsf);
+bool vnt_ofdm_min_rate(struct vnt_private *priv);
+int vnt_adjust_tsf(struct vnt_private *priv, u8 rx_rate,
+		   u64 time_stamp, u64 local_tsf);
 bool vnt_get_current_tsf(struct vnt_private *priv, u64 *current_tsf);
 bool vnt_clear_current_tsf(struct vnt_private *priv);
-void vnt_reset_next_tbtt(struct vnt_private *priv, u16 beacon_interval);
-void vnt_update_next_tbtt(struct vnt_private *priv, u64 tsf,
-			  u16 beacon_interval);
+int vnt_reset_next_tbtt(struct vnt_private *priv, u16 beacon_interval);
+int vnt_update_next_tbtt(struct vnt_private *priv, u64 tsf,
+			 u16 beacon_interval);
 u64 vnt_get_next_tbtt(u64 tsf, u16 beacon_interval);
 u64 vnt_get_tsf_offset(u8 rx_rate, u64 tsf1, u64 tsf2);
 int vnt_radio_power_off(struct vnt_private *priv);
 int vnt_radio_power_on(struct vnt_private *priv);
 u8 vnt_get_pkt_type(struct vnt_private *priv);
-void vnt_set_bss_mode(struct vnt_private *priv);
+int vnt_set_bss_mode(struct vnt_private *priv);
 
 #endif /* __CARD_H__ */
diff --git a/drivers/staging/vt6656/device.h b/drivers/staging/vt6656/device.h
index e6ee9411f080..7834d69e7ac0 100644
--- a/drivers/staging/vt6656/device.h
+++ b/drivers/staging/vt6656/device.h
@@ -73,6 +73,10 @@
 
 #define DEVICE_VERSION			"mac80211"
 
+#define FIRMWARE_VERSION		0x133		/* version 1.51 */
+#define FIRMWARE_NAME			"vntwusb.fw"
+#define FIRMWARE_CHUNK_SIZE		0x400
+
 #define CONFIG_PATH			"/etc/vntconfiguration.dat"
 
 #define MAX_UINTS			8
@@ -344,7 +348,6 @@ struct vnt_private {
 	u8 ofdm_pwr_tbl[14];
 	u8 ofdm_a_pwr_tbl[42];
 
-	u16 current_rate;
 	u16 tx_rate_fb0;
 	u16 tx_rate_fb1;
 
diff --git a/drivers/staging/vt6656/firmware.c b/drivers/staging/vt6656/firmware.c
deleted file mode 100644
index 70358d427211..000000000000
--- a/drivers/staging/vt6656/firmware.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
- * All rights reserved.
- *
- * File: baseband.c
- *
- * Purpose: Implement functions to access baseband
- *
- * Author: Yiching Chen
- *
- * Date: May 20, 2004
- *
- * Functions:
- *
- * Revision History:
- *
- */
-
-#include <linux/compiler.h>
-#include "firmware.h"
-#include "usbpipe.h"
-
-#define FIRMWARE_VERSION	0x133		/* version 1.51 */
-#define FIRMWARE_NAME		"vntwusb.fw"
-
-#define FIRMWARE_CHUNK_SIZE	0x400
-
-int vnt_download_firmware(struct vnt_private *priv)
-{
-	struct device *dev = &priv->usb->dev;
-	const struct firmware *fw;
-	u16 length;
-	int ii;
-	int ret = 0;
-
-	dev_dbg(dev, "---->Download firmware\n");
-
-	ret = request_firmware(&fw, FIRMWARE_NAME, dev);
-	if (ret) {
-		dev_err(dev, "firmware file %s request failed (%d)\n",
-			FIRMWARE_NAME, ret);
-		goto end;
-	}
-
-	for (ii = 0; ii < fw->size; ii += FIRMWARE_CHUNK_SIZE) {
-		length = min_t(int, fw->size - ii, FIRMWARE_CHUNK_SIZE);
-
-		ret = vnt_control_out(priv, 0, 0x1200 + ii, 0x0000, length,
-				      fw->data + ii);
-		if (ret)
-			goto free_fw;
-
-		dev_dbg(dev, "Download firmware...%d %zu\n", ii, fw->size);
-	}
-
-free_fw:
-	release_firmware(fw);
-end:
-	return ret;
-}
-MODULE_FIRMWARE(FIRMWARE_NAME);
-
-int vnt_firmware_branch_to_sram(struct vnt_private *priv)
-{
-	dev_dbg(&priv->usb->dev, "---->Branch to Sram\n");
-
-	return vnt_control_out(priv, 1, 0x1200, 0x0000, 0, NULL);
-}
-
-int vnt_check_firmware_version(struct vnt_private *priv)
-{
-	int ret = 0;
-
-	ret = vnt_control_in(priv, MESSAGE_TYPE_READ, 0,
-			     MESSAGE_REQUEST_VERSION, 2,
-			     (u8 *)&priv->firmware_version);
-	if (ret) {
-		dev_dbg(&priv->usb->dev,
-			"Could not get firmware version: %d.\n", ret);
-		goto end;
-	}
-
-	dev_dbg(&priv->usb->dev, "Firmware Version [%04x]\n",
-		priv->firmware_version);
-
-	if (priv->firmware_version == 0xFFFF) {
-		dev_dbg(&priv->usb->dev, "In Loader.\n");
-		ret = -EINVAL;
-		goto end;
-	}
-
-	if (priv->firmware_version < FIRMWARE_VERSION) {
-		/* branch to loader for download new firmware */
-		ret = vnt_firmware_branch_to_sram(priv);
-		if (ret) {
-			dev_dbg(&priv->usb->dev,
-				"Could not branch to SRAM: %d.\n", ret);
-		} else {
-			ret = -EINVAL;
-		}
-	}
-
-end:
-	return ret;
-}
diff --git a/drivers/staging/vt6656/firmware.h b/drivers/staging/vt6656/firmware.h
deleted file mode 100644
index 161126faf396..000000000000
--- a/drivers/staging/vt6656/firmware.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
- * All rights reserved.
- *
- * File: firmware.h
- *
- * Purpose: Version and Release Information
- *
- * Author: Yiching Chen
- *
- * Date: May 20, 2004
- *
- */
-
-#ifndef __FIRMWARE_H__
-#define __FIRMWARE_H__
-
-#include "device.h"
-
-int vnt_download_firmware(struct vnt_private *priv);
-int vnt_firmware_branch_to_sram(struct vnt_private *priv);
-int vnt_check_firmware_version(struct vnt_private *priv);
-
-#endif /* __FIRMWARE_H__ */
diff --git a/drivers/staging/vt6656/mac.c b/drivers/staging/vt6656/mac.c
index 5cacf6e60e90..da7067c34643 100644
--- a/drivers/staging/vt6656/mac.c
+++ b/drivers/staging/vt6656/mac.c
@@ -22,90 +22,40 @@
 #include "mac.h"
 #include "usbpipe.h"
 
-/*
- * Description:
- *      Write MAC Multicast Address Mask
- *
- * Parameters:
- *  In:
- *	mc_filter (mac filter)
- *  Out:
- *      none
- *
- * Return Value: none
- *
- */
-void vnt_mac_set_filter(struct vnt_private *priv, u64 mc_filter)
+int vnt_mac_set_filter(struct vnt_private *priv, u64 mc_filter)
 {
 	__le64 le_mc = cpu_to_le64(mc_filter);
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_MAR0,
-			MESSAGE_REQUEST_MACREG, sizeof(le_mc), (u8 *)&le_mc);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_MAR0,
+			       MESSAGE_REQUEST_MACREG, sizeof(le_mc),
+			       (u8 *)&le_mc);
 }
 
-/*
- * Description:
- *      Shut Down MAC
- *
- * Parameters:
- *  In:
- *  Out:
- *      none
- *
- *
- */
-void vnt_mac_shutdown(struct vnt_private *priv)
+int vnt_mac_shutdown(struct vnt_private *priv)
 {
-	vnt_control_out(priv, MESSAGE_TYPE_MACSHUTDOWN, 0, 0, 0, NULL);
+	return vnt_control_out(priv, MESSAGE_TYPE_MACSHUTDOWN, 0, 0, 0, NULL);
 }
 
-void vnt_mac_set_bb_type(struct vnt_private *priv, u8 type)
+int vnt_mac_set_bb_type(struct vnt_private *priv, u8 type)
 {
 	u8 data[2];
 
 	data[0] = type;
 	data[1] = EnCFG_BBType_MASK;
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG0,
-			MESSAGE_REQUEST_MACREG,	ARRAY_SIZE(data), data);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG0,
+			       MESSAGE_REQUEST_MACREG,	ARRAY_SIZE(data),
+			       data);
 }
 
-/*
- * Description:
- *      Disable the Key Entry by MISCFIFO
- *
- * Parameters:
- *  In:
- *      dwIoBase        - Base Address for MAC
- *
- *  Out:
- *      none
- *
- * Return Value: none
- *
- */
-void vnt_mac_disable_keyentry(struct vnt_private *priv, u8 entry_idx)
+int vnt_mac_disable_keyentry(struct vnt_private *priv, u8 entry_idx)
 {
-	vnt_control_out(priv, MESSAGE_TYPE_CLRKEYENTRY, 0, 0,
-			sizeof(entry_idx), &entry_idx);
+	return vnt_control_out(priv, MESSAGE_TYPE_CLRKEYENTRY, 0, 0,
+			       sizeof(entry_idx), &entry_idx);
 }
 
-/*
- * Description:
- *      Set the Key by MISCFIFO
- *
- * Parameters:
- *  In:
- *      dwIoBase        - Base Address for MAC
- *
- *  Out:
- *      none
- *
- * Return Value: none
- *
- */
-void vnt_mac_set_keyentry(struct vnt_private *priv, u16 key_ctl, u32 entry_idx,
-			  u32 key_idx, u8 *addr, u8 *key)
+int vnt_mac_set_keyentry(struct vnt_private *priv, u16 key_ctl, u32 entry_idx,
+			 u32 key_idx, u8 *addr, u8 *key)
 {
 	struct vnt_mac_set_key set_key;
 	u16 offset;
@@ -124,9 +74,9 @@ void vnt_mac_set_keyentry(struct vnt_private *priv, u16 key_ctl, u32 entry_idx,
 	dev_dbg(&priv->usb->dev, "offset %d key ctl %d set key %24ph\n",
 		offset, key_ctl, (u8 *)&set_key);
 
-	vnt_control_out(priv, MESSAGE_TYPE_SETKEY, offset,
-			(u16)key_idx, sizeof(struct vnt_mac_set_key),
-			(u8 *)&set_key);
+	return vnt_control_out(priv, MESSAGE_TYPE_SETKEY, offset,
+			       (u16)key_idx, sizeof(struct vnt_mac_set_key),
+			       (u8 *)&set_key);
 }
 
 int vnt_mac_reg_bits_off(struct vnt_private *priv, u8 reg_ofs, u8 bits)
@@ -151,76 +101,76 @@ int vnt_mac_reg_bits_on(struct vnt_private *priv, u8 reg_ofs, u8 bits)
 			       MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
 }
 
-void vnt_mac_write_word(struct vnt_private *priv, u8 reg_ofs, u16 word)
+int vnt_mac_write_word(struct vnt_private *priv, u8 reg_ofs, u16 word)
 {
 	u8 data[2];
 
 	data[0] = (u8)(word & 0xff);
 	data[1] = (u8)(word >> 8);
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE, reg_ofs,
-			MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE, reg_ofs,
+			       MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
 }
 
-void vnt_mac_set_bssid_addr(struct vnt_private *priv, u8 *addr)
+int vnt_mac_set_bssid_addr(struct vnt_private *priv, u8 *addr)
 {
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_BSSID0,
-			MESSAGE_REQUEST_MACREG, ETH_ALEN, addr);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_BSSID0,
+			       MESSAGE_REQUEST_MACREG, ETH_ALEN, addr);
 }
 
-void vnt_mac_enable_protect_mode(struct vnt_private *priv)
+int vnt_mac_enable_protect_mode(struct vnt_private *priv)
 {
 	u8 data[2];
 
 	data[0] = EnCFG_ProtectMd;
 	data[1] = EnCFG_ProtectMd;
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG0,
-			MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG0,
+			       MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
 }
 
-void vnt_mac_disable_protect_mode(struct vnt_private *priv)
+int vnt_mac_disable_protect_mode(struct vnt_private *priv)
 {
 	u8 data[2];
 
 	data[0] = 0;
 	data[1] = EnCFG_ProtectMd;
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG0,
-			MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG0,
+			       MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
 }
 
-void vnt_mac_enable_barker_preamble_mode(struct vnt_private *priv)
+int vnt_mac_enable_barker_preamble_mode(struct vnt_private *priv)
 {
 	u8 data[2];
 
 	data[0] = EnCFG_BarkerPream;
 	data[1] = EnCFG_BarkerPream;
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG2,
-			MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG2,
+			       MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
 }
 
-void vnt_mac_disable_barker_preamble_mode(struct vnt_private *priv)
+int vnt_mac_disable_barker_preamble_mode(struct vnt_private *priv)
 {
 	u8 data[2];
 
 	data[0] = 0;
 	data[1] = EnCFG_BarkerPream;
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG2,
-			MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE_MASK, MAC_REG_ENCFG2,
+			       MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
 }
 
-void vnt_mac_set_beacon_interval(struct vnt_private *priv, u16 interval)
+int vnt_mac_set_beacon_interval(struct vnt_private *priv, u16 interval)
 {
 	u8 data[2];
 
 	data[0] = (u8)(interval & 0xff);
 	data[1] = (u8)(interval >> 8);
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_BI,
-			MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_BI,
+			       MESSAGE_REQUEST_MACREG, ARRAY_SIZE(data), data);
 }
 
 int vnt_mac_set_led(struct vnt_private *priv, u8 state, u8 led)
diff --git a/drivers/staging/vt6656/mac.h b/drivers/staging/vt6656/mac.h
index c532b27de37f..dae70b5c7634 100644
--- a/drivers/staging/vt6656/mac.h
+++ b/drivers/staging/vt6656/mac.h
@@ -177,7 +177,7 @@
 #define EnCFG_BBType_a		0x00
 #define EnCFG_BBType_b		BIT(0)
 #define EnCFG_BBType_g		BIT(1)
-#define EnCFG_BBType_MASK	(BIT(0) | BIT(1))
+#define EnCFG_BBType_MASK	(EnCFG_BBType_b | EnCFG_BBType_g)
 #define EnCFG_ProtectMd		BIT(5)
 
 /* Bits in the EnhanceCFG_1 register */
@@ -355,21 +355,21 @@ struct vnt_mac_set_key {
 	u8 key[WLAN_KEY_LEN_CCMP];
 } __packed;
 
-void vnt_mac_set_filter(struct vnt_private *priv, u64 mc_filter);
-void vnt_mac_shutdown(struct vnt_private *priv);
-void vnt_mac_set_bb_type(struct vnt_private *priv, u8 type);
-void vnt_mac_disable_keyentry(struct vnt_private *priv, u8 entry_idx);
-void vnt_mac_set_keyentry(struct vnt_private *priv, u16 key_ctl, u32 entry_idx,
-			  u32 key_idx, u8 *addr, u8 *key);
+int vnt_mac_set_filter(struct vnt_private *priv, u64 mc_filter);
+int vnt_mac_shutdown(struct vnt_private *priv);
+int vnt_mac_set_bb_type(struct vnt_private *priv, u8 type);
+int vnt_mac_disable_keyentry(struct vnt_private *priv, u8 entry_idx);
+int vnt_mac_set_keyentry(struct vnt_private *priv, u16 key_ctl, u32 entry_idx,
+			 u32 key_idx, u8 *addr, u8 *key);
 int vnt_mac_reg_bits_off(struct vnt_private *priv, u8 reg_ofs, u8 bits);
 int vnt_mac_reg_bits_on(struct vnt_private *priv, u8 reg_ofs, u8 bits);
-void vnt_mac_write_word(struct vnt_private *priv, u8 reg_ofs, u16 word);
-void vnt_mac_set_bssid_addr(struct vnt_private *priv, u8 *addr);
-void vnt_mac_enable_protect_mode(struct vnt_private *priv);
-void vnt_mac_disable_protect_mode(struct vnt_private *priv);
-void vnt_mac_enable_barker_preamble_mode(struct vnt_private *priv);
-void vnt_mac_disable_barker_preamble_mode(struct vnt_private *priv);
-void vnt_mac_set_beacon_interval(struct vnt_private *priv, u16 interval);
+int vnt_mac_write_word(struct vnt_private *priv, u8 reg_ofs, u16 word);
+int vnt_mac_set_bssid_addr(struct vnt_private *priv, u8 *addr);
+int vnt_mac_enable_protect_mode(struct vnt_private *priv);
+int vnt_mac_disable_protect_mode(struct vnt_private *priv);
+int vnt_mac_enable_barker_preamble_mode(struct vnt_private *priv);
+int vnt_mac_disable_barker_preamble_mode(struct vnt_private *priv);
+int vnt_mac_set_beacon_interval(struct vnt_private *priv, u16 interval);
 int vnt_mac_set_led(struct vnt_private *privpriv, u8 state, u8 led);
 
 #endif /* __MAC_H__ */
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index 5f78cad3b647..7720a8901948 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -33,7 +33,6 @@
 #include "wcmd.h"
 #include "rxtx.h"
 #include "rf.h"
-#include "firmware.h"
 #include "usbpipe.h"
 #include "channel.h"
 
@@ -99,10 +98,88 @@ static void vnt_set_options(struct vnt_private *priv)
 	priv->op_mode = NL80211_IFTYPE_UNSPECIFIED;
 	priv->bb_type = BBP_TYPE_DEF;
 	priv->packet_type = priv->bb_type;
-	priv->preamble_type = 0;
+	priv->preamble_type = PREAMBLE_LONG;
 	priv->exist_sw_net_addr = false;
 }
 
+static int vnt_download_firmware(struct vnt_private *priv)
+{
+	struct device *dev = &priv->usb->dev;
+	const struct firmware *fw;
+	u16 length;
+	int ii;
+	int ret = 0;
+
+	dev_dbg(dev, "---->Download firmware\n");
+
+	ret = request_firmware(&fw, FIRMWARE_NAME, dev);
+	if (ret) {
+		dev_err(dev, "firmware file %s request failed (%d)\n",
+			FIRMWARE_NAME, ret);
+		goto end;
+	}
+
+	for (ii = 0; ii < fw->size; ii += FIRMWARE_CHUNK_SIZE) {
+		length = min_t(int, fw->size - ii, FIRMWARE_CHUNK_SIZE);
+
+		ret = vnt_control_out(priv, 0, 0x1200 + ii, 0x0000, length,
+				      fw->data + ii);
+		if (ret)
+			goto free_fw;
+
+		dev_dbg(dev, "Download firmware...%d %zu\n", ii, fw->size);
+	}
+
+free_fw:
+	release_firmware(fw);
+end:
+	return ret;
+}
+
+static int vnt_firmware_branch_to_sram(struct vnt_private *priv)
+{
+	dev_dbg(&priv->usb->dev, "---->Branch to Sram\n");
+
+	return vnt_control_out(priv, 1, 0x1200, 0x0000, 0, NULL);
+}
+
+static int vnt_check_firmware_version(struct vnt_private *priv)
+{
+	int ret = 0;
+
+	ret = vnt_control_in(priv, MESSAGE_TYPE_READ, 0,
+			     MESSAGE_REQUEST_VERSION, 2,
+			     (u8 *)&priv->firmware_version);
+	if (ret) {
+		dev_dbg(&priv->usb->dev,
+			"Could not get firmware version: %d.\n", ret);
+		goto end;
+	}
+
+	dev_dbg(&priv->usb->dev, "Firmware Version [%04x]\n",
+		priv->firmware_version);
+
+	if (priv->firmware_version == 0xFFFF) {
+		dev_dbg(&priv->usb->dev, "In Loader.\n");
+		ret = -EINVAL;
+		goto end;
+	}
+
+	if (priv->firmware_version < FIRMWARE_VERSION) {
+		/* branch to loader for download new firmware */
+		ret = vnt_firmware_branch_to_sram(priv);
+		if (ret) {
+			dev_dbg(&priv->usb->dev,
+				"Could not branch to SRAM: %d.\n", ret);
+		} else {
+			ret = -EINVAL;
+		}
+	}
+
+end:
+	return ret;
+}
+
 /*
  * initialization of MAC & BBP registers
  */
@@ -324,19 +401,6 @@ static int vnt_init_registers(struct vnt_private *priv)
 	dev_dbg(&priv->usb->dev, "Network address = %pM\n",
 		priv->current_net_addr);
 
-	/*
-	 * set BB and packet type at the same time
-	 * set Short Slot Time, xIFS, and RSPINF
-	 */
-	if (priv->bb_type == BB_TYPE_11A)
-		priv->short_slot_time = true;
-	else
-		priv->short_slot_time = false;
-
-	ret = vnt_set_short_slot_time(priv);
-	if (ret)
-		goto end;
-
 	priv->radio_ctl = priv->eeprom[EEP_OFS_RADIOCTL];
 
 	if ((priv->radio_ctl & EEP_RADIOCTL_ENABLE) != 0) {
@@ -683,15 +747,14 @@ static int vnt_config(struct ieee80211_hw *hw, u32 changed)
 			priv->bb_type = BB_TYPE_11G;
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		if (priv->bb_type == BB_TYPE_11B)
-			priv->current_rate = RATE_1M;
-		else
-			priv->current_rate = RATE_54M;
+	if (changed & IEEE80211_CONF_CHANGE_POWER)
+		vnt_rf_setpower(priv, conf->chandef.chan);
 
-		vnt_rf_setpower(priv, priv->current_rate,
-				conf->chandef.chan->hw_value);
-	}
+	if (conf->flags & (IEEE80211_CONF_OFFCHANNEL | IEEE80211_CONF_IDLE))
+		/* Set max sensitivity*/
+		vnt_update_pre_ed_threshold(priv, true);
+	else
+		vnt_update_pre_ed_threshold(priv, false);
 
 	return 0;
 }
@@ -718,10 +781,10 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
 		if (conf->use_short_preamble) {
 			vnt_mac_enable_barker_preamble_mode(priv);
-			priv->preamble_type = true;
+			priv->preamble_type = PREAMBLE_SHORT;
 		} else {
 			vnt_mac_disable_barker_preamble_mode(priv);
-			priv->preamble_type = false;
+			priv->preamble_type = PREAMBLE_LONG;
 		}
 	}
 
@@ -740,16 +803,14 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
 
 		vnt_set_short_slot_time(priv);
 		vnt_set_vga_gain_offset(priv, priv->bb_vga[0]);
-		vnt_update_pre_ed_threshold(priv, false);
 	}
 
 	if (changed & (BSS_CHANGED_BASIC_RATES | BSS_CHANGED_ERP_PREAMBLE |
 		       BSS_CHANGED_ERP_SLOT))
 		vnt_set_bss_mode(priv);
 
-	if (changed & BSS_CHANGED_TXPOWER)
-		vnt_rf_setpower(priv, priv->current_rate,
-				conf->chandef.chan->hw_value);
+	if (changed & (BSS_CHANGED_TXPOWER | BSS_CHANGED_BANDWIDTH))
+		vnt_rf_setpower(priv, conf->chandef.chan);
 
 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
 		dev_dbg(&priv->usb->dev,
@@ -868,25 +929,6 @@ static int vnt_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	return 0;
 }
 
-static void vnt_sw_scan_start(struct ieee80211_hw *hw,
-			      struct ieee80211_vif *vif,
-			      const u8 *addr)
-{
-	struct vnt_private *priv = hw->priv;
-
-	/* Set max sensitivity*/
-	vnt_update_pre_ed_threshold(priv, true);
-}
-
-static void vnt_sw_scan_complete(struct ieee80211_hw *hw,
-				 struct ieee80211_vif *vif)
-{
-	struct vnt_private *priv = hw->priv;
-
-	/* Return sensitivity to channel level*/
-	vnt_update_pre_ed_threshold(priv, false);
-}
-
 static int vnt_get_stats(struct ieee80211_hw *hw,
 			 struct ieee80211_low_level_stats *stats)
 {
@@ -932,8 +974,6 @@ static const struct ieee80211_ops vnt_mac_ops = {
 	.prepare_multicast	= vnt_prepare_multicast,
 	.configure_filter	= vnt_configure,
 	.set_key		= vnt_set_key,
-	.sw_scan_start		= vnt_sw_scan_start,
-	.sw_scan_complete	= vnt_sw_scan_complete,
 	.get_stats		= vnt_get_stats,
 	.get_tsf		= vnt_get_tsf,
 	.set_tsf		= vnt_set_tsf,
@@ -1078,3 +1118,5 @@ static struct usb_driver vt6656_driver = {
 };
 
 module_usb_driver(vt6656_driver);
+
+MODULE_FIRMWARE(FIRMWARE_NAME);
diff --git a/drivers/staging/vt6656/power.c b/drivers/staging/vt6656/power.c
index 7a086c72d5a8..d160a0773943 100644
--- a/drivers/staging/vt6656/power.c
+++ b/drivers/staging/vt6656/power.c
@@ -77,27 +77,23 @@ void vnt_enable_power_saving(struct vnt_private *priv, u16 listen_interval)
 	dev_dbg(&priv->usb->dev,  "PS:Power Saving Mode Enable...\n");
 }
 
-/*
- *
- * Routine Description:
- * Disable hw power saving functions
- *
- * Return Value:
- *    None.
- *
- */
-
-void vnt_disable_power_saving(struct vnt_private *priv)
+int vnt_disable_power_saving(struct vnt_private *priv)
 {
+	int ret;
+
 	/* disable power saving hw function */
-	vnt_control_out(priv, MESSAGE_TYPE_DISABLE_PS, 0,
-			0, 0, NULL);
+	ret = vnt_control_out(priv, MESSAGE_TYPE_DISABLE_PS, 0,
+			      0, 0, NULL);
+	if (ret)
+		return ret;
 
 	/* clear AutoSleep */
 	vnt_mac_reg_bits_off(priv, MAC_REG_PSCFG, PSCFG_AUTOSLEEP);
 
 	/* set always listen beacon */
 	vnt_mac_reg_bits_on(priv, MAC_REG_PSCTL, PSCTL_ALBCN);
+
+	return 0;
 }
 
 /*
diff --git a/drivers/staging/vt6656/power.h b/drivers/staging/vt6656/power.h
index 58755ae16e5a..160872026db3 100644
--- a/drivers/staging/vt6656/power.h
+++ b/drivers/staging/vt6656/power.h
@@ -18,7 +18,7 @@
 
 #define C_PWBT	1000 /* micro sec. power up before TBTT */
 
-void vnt_disable_power_saving(struct vnt_private *priv);
+int vnt_disable_power_saving(struct vnt_private *priv);
 void vnt_enable_power_saving(struct vnt_private *priv, u16 listen_interval);
 int vnt_next_tbtt_wakeup(struct vnt_private *priv);
 
diff --git a/drivers/staging/vt6656/rf.c b/drivers/staging/vt6656/rf.c
index 43237b7e1dbe..f18d456a8f5d 100644
--- a/drivers/staging/vt6656/rf.c
+++ b/drivers/staging/vt6656/rf.c
@@ -21,13 +21,13 @@
  *
  */
 
+#include <linux/errno.h>
 #include "mac.h"
 #include "rf.h"
 #include "baseband.h"
 #include "usbpipe.h"
 
 #define CB_AL2230_INIT_SEQ    15
-#define AL2230_PWR_IDX_LEN    64
 
 #define CB_AL7230_INIT_SEQ    16
 #define AL7230_PWR_IDX_LEN    64
@@ -518,74 +518,6 @@ static u8 vt3342_channel_table1[CB_MAX_CHANNEL][3] = {
 	{0x03, 0x00, 0x04}
 };
 
-/* Power Table */
-static const u32 al2230_power_table[AL2230_PWR_IDX_LEN] = {
-	0x04040900,
-	0x04041900,
-	0x04042900,
-	0x04043900,
-	0x04044900,
-	0x04045900,
-	0x04046900,
-	0x04047900,
-	0x04048900,
-	0x04049900,
-	0x0404a900,
-	0x0404b900,
-	0x0404c900,
-	0x0404d900,
-	0x0404e900,
-	0x0404f900,
-	0x04050900,
-	0x04051900,
-	0x04052900,
-	0x04053900,
-	0x04054900,
-	0x04055900,
-	0x04056900,
-	0x04057900,
-	0x04058900,
-	0x04059900,
-	0x0405a900,
-	0x0405b900,
-	0x0405c900,
-	0x0405d900,
-	0x0405e900,
-	0x0405f900,
-	0x04060900,
-	0x04061900,
-	0x04062900,
-	0x04063900,
-	0x04064900,
-	0x04065900,
-	0x04066900,
-	0x04067900,
-	0x04068900,
-	0x04069900,
-	0x0406a900,
-	0x0406b900,
-	0x0406c900,
-	0x0406d900,
-	0x0406e900,
-	0x0406f900,
-	0x04070900,
-	0x04071900,
-	0x04072900,
-	0x04073900,
-	0x04074900,
-	0x04075900,
-	0x04076900,
-	0x04077900,
-	0x04078900,
-	0x04079900,
-	0x0407a900,
-	0x0407b900,
-	0x0407c900,
-	0x0407d900,
-	0x0407e900,
-	0x0407f900
-};
-
 /*
  * Description: Write to IF/RF, by embedded programming
  */
@@ -600,124 +532,93 @@ int vnt_rf_write_embedded(struct vnt_private *priv, u32 data)
 	reg_data[2] = (u8)(data >> 16);
 	reg_data[3] = (u8)(data >> 24);
 
-	vnt_control_out(priv, MESSAGE_TYPE_WRITE_IFRF,
-			0, 0, ARRAY_SIZE(reg_data), reg_data);
-
-	return true;
-}
-
-/* Set Tx power by rate and channel number */
-int vnt_rf_setpower(struct vnt_private *priv, u32 rate, u32 channel)
-{
-	u8 power = priv->cck_pwr;
-
-	if (channel == 0)
-		return -EINVAL;
-
-	switch (rate) {
-	case RATE_1M:
-	case RATE_2M:
-	case RATE_5M:
-	case RATE_11M:
-		channel--;
-
-		if (channel < sizeof(priv->cck_pwr_tbl))
-			power = priv->cck_pwr_tbl[channel];
-		break;
-	case RATE_6M:
-	case RATE_9M:
-	case RATE_12M:
-	case RATE_18M:
-	case RATE_24M:
-	case RATE_36M:
-	case RATE_48M:
-	case RATE_54M:
-		if (channel > CB_MAX_CHANNEL_24G)
-			power = priv->ofdm_a_pwr_tbl[channel - 15];
-		else
-			power = priv->ofdm_pwr_tbl[channel - 1];
-		break;
-	}
-
-	return vnt_rf_set_txpower(priv, power, rate);
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE_IFRF, 0, 0,
+			       ARRAY_SIZE(reg_data), reg_data);
 }
 
 static u8 vnt_rf_addpower(struct vnt_private *priv)
 {
+	int base;
 	s32 rssi = -priv->current_rssi;
 
 	if (!rssi)
 		return 7;
 
-	if (priv->rf_type == RF_VT3226D0) {
-		if (rssi < -70)
-			return 9;
-		else if (rssi < -65)
-			return 7;
-		else if (rssi < -60)
-			return 5;
-	} else {
-		if (rssi < -80)
-			return 9;
-		else if (rssi < -75)
-			return 7;
-		else if (rssi < -70)
-			return 5;
-	}
+	if (priv->rf_type == RF_VT3226D0)
+		base = -60;
+	else
+		base = -70;
+
+	if (rssi < base)
+		return ((rssi - base + 1) / -5) * 2 + 5;
 
 	return 0;
 }
 
 /* Set Tx power by power level and rate */
-int vnt_rf_set_txpower(struct vnt_private *priv, u8 power, u32 rate)
+static int vnt_rf_set_txpower(struct vnt_private *priv, u8 power,
+			      struct ieee80211_channel *ch)
 {
 	u32 power_setting = 0;
-	int ret = true;
+	int ret = 0;
 
 	power += vnt_rf_addpower(priv);
 	if (power > VNT_RF_MAX_POWER)
 		power = VNT_RF_MAX_POWER;
 
 	if (priv->power == power)
-		return true;
+		return 0;
 
 	priv->power = power;
 
 	switch (priv->rf_type) {
 	case RF_AL2230:
-		if (power >= AL2230_PWR_IDX_LEN)
-			return false;
+		power_setting = 0x0404090 | (power << 12);
 
-		ret &= vnt_rf_write_embedded(priv, al2230_power_table[power]);
+		ret = vnt_rf_write_embedded(priv, power_setting);
+		if (ret)
+			return ret;
 
-		if (rate <= RATE_11M)
-			ret &= vnt_rf_write_embedded(priv, 0x0001b400);
+		if (ch->flags & IEEE80211_CHAN_NO_OFDM)
+			ret = vnt_rf_write_embedded(priv, 0x0001b400);
 		else
-			ret &= vnt_rf_write_embedded(priv, 0x0005a400);
+			ret = vnt_rf_write_embedded(priv, 0x0005a400);
+
 		break;
 	case RF_AL2230S:
-		if (power >= AL2230_PWR_IDX_LEN)
-			return false;
+		power_setting = 0x0404090 | (power << 12);
+
+		ret = vnt_rf_write_embedded(priv, power_setting);
+		if (ret)
+			return ret;
 
-		ret &= vnt_rf_write_embedded(priv, al2230_power_table[power]);
+		if (ch->flags & IEEE80211_CHAN_NO_OFDM) {
+			ret = vnt_rf_write_embedded(priv, 0x040c1400);
+			if (ret)
+				return ret;
 
-		if (rate <= RATE_11M) {
-			ret &= vnt_rf_write_embedded(priv, 0x040c1400);
-			ret &= vnt_rf_write_embedded(priv, 0x00299b00);
+			ret = vnt_rf_write_embedded(priv, 0x00299b00);
 		} else {
-			ret &= vnt_rf_write_embedded(priv, 0x0005a400);
-			ret &= vnt_rf_write_embedded(priv, 0x00099b00);
+			ret = vnt_rf_write_embedded(priv, 0x0005a400);
+			if (ret)
+				return ret;
+
+			ret = vnt_rf_write_embedded(priv, 0x00099b00);
 		}
+
 		break;
 
 	case RF_AIROHA7230:
-		if (rate <= RATE_11M)
-			ret &= vnt_rf_write_embedded(priv, 0x111bb900);
+		if (ch->flags & IEEE80211_CHAN_NO_OFDM)
+			ret = vnt_rf_write_embedded(priv, 0x111bb900);
 		else
-			ret &= vnt_rf_write_embedded(priv, 0x221bb900);
+			ret = vnt_rf_write_embedded(priv, 0x221bb900);
+
+		if (ret)
+			return ret;
 
 		if (power >= AL7230_PWR_IDX_LEN)
-			return false;
+			return -EINVAL;
 
 		/*
 		 * 0x080F1B00 for 3 wire control TxGain(D10)
@@ -725,61 +626,76 @@ int vnt_rf_set_txpower(struct vnt_private *priv, u8 power, u32 rate)
 		 */
 		power_setting = 0x080c0b00 | (power << 12);
 
-		ret &= vnt_rf_write_embedded(priv, power_setting);
-
+		ret = vnt_rf_write_embedded(priv, power_setting);
 		break;
 
 	case RF_VT3226:
 		if (power >= VT3226_PWR_IDX_LEN)
-			return false;
+			return -EINVAL;
 		power_setting = ((0x3f - power) << 20) | (0x17 << 8);
 
-		ret &= vnt_rf_write_embedded(priv, power_setting);
-
+		ret = vnt_rf_write_embedded(priv, power_setting);
 		break;
 	case RF_VT3226D0:
 		if (power >= VT3226_PWR_IDX_LEN)
-			return false;
+			return -EINVAL;
 
-		if (rate <= RATE_11M) {
-			u16 hw_value = priv->hw->conf.chandef.chan->hw_value;
+		if (ch->flags & IEEE80211_CHAN_NO_OFDM) {
+			u16 hw_value = ch->hw_value;
 
 			power_setting = ((0x3f - power) << 20) | (0xe07 << 8);
 
-			ret &= vnt_rf_write_embedded(priv, power_setting);
-			ret &= vnt_rf_write_embedded(priv, 0x03c6a200);
+			ret = vnt_rf_write_embedded(priv, power_setting);
+			if (ret)
+				return ret;
+
+			ret = vnt_rf_write_embedded(priv, 0x03c6a200);
+			if (ret)
+				return ret;
 
 			dev_dbg(&priv->usb->dev,
 				"%s 11b channel [%d]\n", __func__, hw_value);
 
 			hw_value--;
 
-			if (hw_value < ARRAY_SIZE(vt3226d0_lo_current_table))
-				ret &= vnt_rf_write_embedded(priv,
+			if (hw_value < ARRAY_SIZE(vt3226d0_lo_current_table)) {
+				ret = vnt_rf_write_embedded(priv,
 					vt3226d0_lo_current_table[hw_value]);
+				if (ret)
+					return ret;
+			}
 
-			ret &= vnt_rf_write_embedded(priv, 0x015C0800);
+			ret = vnt_rf_write_embedded(priv, 0x015C0800);
 		} else {
 			dev_dbg(&priv->usb->dev,
 				"@@@@ %s> 11G mode\n", __func__);
 
 			power_setting = ((0x3f - power) << 20) | (0x7 << 8);
 
-			ret &= vnt_rf_write_embedded(priv, power_setting);
-			ret &= vnt_rf_write_embedded(priv, 0x00C6A200);
-			ret &= vnt_rf_write_embedded(priv, 0x016BC600);
-			ret &= vnt_rf_write_embedded(priv, 0x00900800);
+			ret = vnt_rf_write_embedded(priv, power_setting);
+			if (ret)
+				return ret;
+
+			ret = vnt_rf_write_embedded(priv, 0x00C6A200);
+			if (ret)
+				return ret;
+
+			ret = vnt_rf_write_embedded(priv, 0x016BC600);
+			if (ret)
+				return ret;
+
+			ret = vnt_rf_write_embedded(priv, 0x00900800);
 		}
+
 		break;
 
 	case RF_VT3342A0:
 		if (power >= VT3342_PWR_IDX_LEN)
-			return false;
+			return -EINVAL;
 
 		power_setting =  ((0x3f - power) << 20) | (0x27 << 8);
 
-		ret &= vnt_rf_write_embedded(priv, power_setting);
-
+		ret = vnt_rf_write_embedded(priv, power_setting);
 		break;
 	default:
 		break;
@@ -787,6 +703,36 @@ int vnt_rf_set_txpower(struct vnt_private *priv, u8 power, u32 rate)
 	return ret;
 }
 
+/* Set Tx power by channel number type */
+int vnt_rf_setpower(struct vnt_private *priv,
+		    struct ieee80211_channel *ch)
+{
+	u16 channel;
+	u8 power = priv->cck_pwr;
+
+	if (!ch)
+		return -EINVAL;
+
+	/* set channel number to array number */
+	channel = ch->hw_value - 1;
+
+	if (ch->flags & IEEE80211_CHAN_NO_OFDM) {
+		if (channel < ARRAY_SIZE(priv->cck_pwr_tbl))
+			power = priv->cck_pwr_tbl[channel];
+	} else if (ch->band == NL80211_BAND_5GHZ) {
+		/* remove 14 channels to array size */
+		channel -= 14;
+
+		if (channel < ARRAY_SIZE(priv->ofdm_a_pwr_tbl))
+			power = priv->ofdm_a_pwr_tbl[channel];
+	} else {
+		if (channel < ARRAY_SIZE(priv->ofdm_pwr_tbl))
+			power = priv->ofdm_pwr_tbl[channel];
+	}
+
+	return vnt_rf_set_txpower(priv, power, ch);
+}
+
 /* Convert rssi to dbm */
 void vnt_rf_rssi_to_dbm(struct vnt_private *priv, u8 rssi, long *dbm)
 {
@@ -813,11 +759,9 @@ void vnt_rf_rssi_to_dbm(struct vnt_private *priv, u8 rssi, long *dbm)
 
 int vnt_rf_table_download(struct vnt_private *priv)
 {
-	int ret = 0;
+	int ret;
 	u16 length1 = 0, length2 = 0, length3 = 0;
 	u8 *addr1 = NULL, *addr2 = NULL, *addr3 = NULL;
-	u16 length, value;
-	u8 array[256];
 
 	switch (priv->rf_type) {
 	case RF_AL2230:
@@ -864,52 +808,20 @@ int vnt_rf_table_download(struct vnt_private *priv)
 	}
 
 	/* Init Table */
-	memcpy(array, addr1, length1);
-
 	ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, 0,
-			      MESSAGE_REQUEST_RF_INIT, length1, array);
+			      MESSAGE_REQUEST_RF_INIT, length1, addr1);
 	if (ret)
-		goto end;
+		return ret;
 
 	/* Channel Table 0 */
-	value = 0;
-	while (length2 > 0) {
-		if (length2 >= 64)
-			length = 64;
-		else
-			length = length2;
-
-		memcpy(array, addr2, length);
-
-		ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, value,
-				      MESSAGE_REQUEST_RF_CH0, length, array);
-		if (ret)
-			goto end;
-
-		length2 -= length;
-		value += length;
-		addr2 += length;
-	}
-
-	/* Channel table 1 */
-	value = 0;
-	while (length3 > 0) {
-		if (length3 >= 64)
-			length = 64;
-		else
-			length = length3;
-
-		memcpy(array, addr3, length);
-
-		ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, value,
-				      MESSAGE_REQUEST_RF_CH1, length, array);
-		if (ret)
-			goto end;
+	ret = vnt_control_out_blocks(priv, VNT_REG_BLOCK_SIZE,
+				     MESSAGE_REQUEST_RF_CH0, length2, addr2);
+	if (ret)
+		return ret;
 
-		length3 -= length;
-		value += length;
-		addr3 += length;
-	}
+	/* Channel Table 1 */
+	ret = vnt_control_out_blocks(priv, VNT_REG_BLOCK_SIZE,
+				     MESSAGE_REQUEST_RF_CH1, length3, addr3);
 
 	if (priv->rf_type == RF_AIROHA7230) {
 		length1 = CB_AL7230_INIT_SEQ * 3;
@@ -917,36 +829,17 @@ int vnt_rf_table_download(struct vnt_private *priv)
 		addr1 = &al7230_init_table_amode[0][0];
 		addr2 = &al7230_channel_table2[0][0];
 
-		memcpy(array, addr1, length1);
-
 		/* Init Table 2 */
 		ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, 0,
-				      MESSAGE_REQUEST_RF_INIT2, length1, array);
+				      MESSAGE_REQUEST_RF_INIT2, length1, addr1);
 		if (ret)
-			goto end;
-
-		/* Channel Table 0 */
-		value = 0;
-		while (length2 > 0) {
-			if (length2 >= 64)
-				length = 64;
-			else
-				length = length2;
+			return ret;
 
-			memcpy(array, addr2, length);
-
-			ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, value,
-					      MESSAGE_REQUEST_RF_CH2, length,
-					      array);
-			if (ret)
-				goto end;
-
-			length2 -= length;
-			value += length;
-			addr2 += length;
-		}
+		/* Channel Table 2 */
+		ret = vnt_control_out_blocks(priv, VNT_REG_BLOCK_SIZE,
+					     MESSAGE_REQUEST_RF_CH2, length2,
+					     addr2);
 	}
 
-end:
 	return ret;
 }
diff --git a/drivers/staging/vt6656/rf.h b/drivers/staging/vt6656/rf.h
index 7494546d71b8..493faaf4e2b5 100644
--- a/drivers/staging/vt6656/rf.h
+++ b/drivers/staging/vt6656/rf.h
@@ -41,8 +41,7 @@
 #define	VNT_RF_REG_LEN      0x17 /* 24 bit length */
 
 int vnt_rf_write_embedded(struct vnt_private *priv, u32 data);
-int vnt_rf_setpower(struct vnt_private *priv, u32 rate, u32 channel);
-int vnt_rf_set_txpower(struct vnt_private *priv, u8 power, u32 rate);
+int vnt_rf_setpower(struct vnt_private *priv, struct ieee80211_channel *ch);
 void vnt_rf_rssi_to_dbm(struct vnt_private *priv, u8 rssi, long *dbm);
 int vnt_rf_table_download(struct vnt_private *priv);
 
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index 9439d190f431..68be0fa7b201 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -45,6 +45,25 @@ static const u16 vnt_time_stampoff[2][MAX_RATE] = {
 #define DATADUR_B       10
 #define DATADUR_A       11
 
+static const u16 vnt_frame_time[MAX_RATE] = {
+	10, 20, 55, 110, 24, 36, 48, 72, 96, 144, 192, 216
+};
+
+static const u8 vnt_phy_signal[] = {
+	0x00,	/* RATE_1M  */
+	0x01,	/* RATE_2M  */
+	0x02,	/* RATE_5M  */
+	0x03,	/* RATE_11M */
+	0x8b,	/* RATE_6M  */
+	0x8f,	/* RATE_9M  */
+	0x8a,	/* RATE_12M */
+	0x8e,	/* RATE_18M */
+	0x89,	/* RATE_24M */
+	0x8d,	/* RATE_36M */
+	0x88,	/* RATE_48M */
+	0x8c	/* RATE_54M */
+};
+
 static struct vnt_usb_send_context
 	*vnt_get_free_context(struct vnt_private *priv)
 {
@@ -78,6 +97,98 @@ static struct vnt_usb_send_context
 	return NULL;
 }
 
+/* Frame time for Tx */
+static unsigned int vnt_get_frame_time(u8 preamble_type, u8 pkt_type,
+				       unsigned int frame_length, u16 tx_rate)
+{
+	unsigned int frame_time;
+	unsigned int preamble;
+	unsigned int rate;
+
+	if (tx_rate > RATE_54M)
+		return 0;
+
+	rate = (unsigned int)vnt_frame_time[tx_rate];
+
+	if (tx_rate <= RATE_11M) {
+		if (preamble_type == PREAMBLE_SHORT)
+			preamble = 96;
+		else
+			preamble = 192;
+
+		frame_time = DIV_ROUND_UP(frame_length * 80, rate);
+		return preamble + frame_time;
+	}
+
+	frame_time = DIV_ROUND_UP(frame_length * 8 + 22, rate);
+	frame_time = frame_time * 4;
+
+	if (pkt_type != PK_TYPE_11A)
+		frame_time += 6;
+	return 20 + frame_time;
+}
+
+/* Get Length, Service, and Signal fields of Phy for Tx */
+static void vnt_get_phy_field(struct vnt_private *priv, u32 frame_length,
+			      u16 tx_rate, u8 pkt_type,
+			      struct vnt_phy_field *phy)
+{
+	u32 bit_count;
+	u32 count = 0;
+	u32 tmp;
+	int ext_bit;
+	int i;
+	u8 mask = 0;
+	u8 preamble_type = priv->preamble_type;
+
+	bit_count = frame_length * 8;
+	ext_bit = false;
+
+	switch (tx_rate) {
+	case RATE_1M:
+		count = bit_count;
+		break;
+	case RATE_2M:
+		count = bit_count / 2;
+		break;
+	case RATE_5M:
+		count = DIV_ROUND_UP(bit_count * 10, 55);
+		break;
+	case RATE_11M:
+		count = bit_count / 11;
+		tmp = count * 11;
+
+		if (tmp != bit_count) {
+			count++;
+
+			if ((bit_count - tmp) <= 3)
+				ext_bit = true;
+		}
+
+		break;
+	}
+
+	if (tx_rate > RATE_11M) {
+		if (pkt_type == PK_TYPE_11A)
+			mask = BIT(4);
+	} else if (tx_rate > RATE_1M) {
+		if (preamble_type == PREAMBLE_SHORT)
+			mask = BIT(3);
+	}
+
+	i = tx_rate > RATE_54M ? RATE_54M : tx_rate;
+	phy->signal = vnt_phy_signal[i] | mask;
+	phy->service = 0x00;
+
+	if (pkt_type == PK_TYPE_11B) {
+		if (ext_bit)
+			phy->service |= 0x80;
+		phy->len = cpu_to_le16((u16)count);
+	} else {
+		phy->len = cpu_to_le16((u16)frame_length);
+	}
+}
+
 static __le16 vnt_time_stamp_off(struct vnt_private *priv, u16 rate)
 {
 	return cpu_to_le16(vnt_time_stampoff[priv->preamble_type % 2]
@@ -216,8 +327,8 @@ static u16 vnt_mac_hdr_pos(struct vnt_usb_send_context *tx_context,
 	return (u16)(hdr_pos - head);
 }
 
-static u16 vnt_rxtx_datahead_g(struct vnt_usb_send_context *tx_context,
-			       struct vnt_tx_datahead_g *buf)
+static void vnt_rxtx_datahead_g(struct vnt_usb_send_context *tx_context,
+				struct vnt_tx_datahead_g *buf)
 {
 	struct vnt_private *priv = tx_context->priv;
 	struct ieee80211_hdr *hdr =
@@ -238,12 +349,10 @@ static u16 vnt_rxtx_datahead_g(struct vnt_usb_send_context *tx_context,
 						   priv->top_cck_basic_rate);
 
 	tx_context->tx_hdr_size = vnt_mac_hdr_pos(tx_context, &buf->hdr);
-
-	return le16_to_cpu(buf->duration_a);
 }
 
-static u16 vnt_rxtx_datahead_ab(struct vnt_usb_send_context *tx_context,
-				struct vnt_tx_datahead_ab *buf)
+static void vnt_rxtx_datahead_ab(struct vnt_usb_send_context *tx_context,
+				 struct vnt_tx_datahead_ab *buf)
 {
 	struct vnt_private *priv = tx_context->priv;
 	struct ieee80211_hdr *hdr =
@@ -260,12 +369,10 @@ static u16 vnt_rxtx_datahead_ab(struct vnt_usb_send_context *tx_context,
 	buf->time_stamp_off = vnt_time_stamp_off(priv, rate);
 
 	tx_context->tx_hdr_size = vnt_mac_hdr_pos(tx_context, &buf->hdr);
-
-	return le16_to_cpu(buf->duration);
 }
 
-static int vnt_fill_ieee80211_rts(struct vnt_usb_send_context *tx_context,
-				  struct ieee80211_rts *rts, __le16 duration)
+static void vnt_fill_ieee80211_rts(struct vnt_usb_send_context *tx_context,
+				   struct ieee80211_rts *rts, __le16 duration)
 {
 	struct ieee80211_hdr *hdr =
 				(struct ieee80211_hdr *)tx_context->skb->data;
@@ -276,12 +383,10 @@ static int vnt_fill_ieee80211_rts(struct vnt_usb_send_context *tx_context,
 
 	ether_addr_copy(rts->ra, hdr->addr1);
 	ether_addr_copy(rts->ta, hdr->addr2);
-
-	return 0;
 }
 
-static u16 vnt_rxtx_rts_g_head(struct vnt_usb_send_context *tx_context,
-			       struct vnt_rts_g *buf)
+static void vnt_rxtx_rts_g_head(struct vnt_usb_send_context *tx_context,
+				struct vnt_rts_g *buf)
 {
 	struct vnt_private *priv = tx_context->priv;
 	u16 rts_frame_len = 20;
@@ -304,11 +409,11 @@ static u16 vnt_rxtx_rts_g_head(struct vnt_usb_send_context *tx_context,
 
 	vnt_fill_ieee80211_rts(tx_context, &buf->data, buf->duration_aa);
 
-	return vnt_rxtx_datahead_g(tx_context, &buf->data_head);
+	vnt_rxtx_datahead_g(tx_context, &buf->data_head);
 }
 
-static u16 vnt_rxtx_rts_ab_head(struct vnt_usb_send_context *tx_context,
-				struct vnt_rts_ab *buf)
+static void vnt_rxtx_rts_ab_head(struct vnt_usb_send_context *tx_context,
+				 struct vnt_rts_ab *buf)
 {
 	struct vnt_private *priv = tx_context->priv;
 	u16 current_rate = tx_context->tx_rate;
@@ -323,11 +428,11 @@ static u16 vnt_rxtx_rts_ab_head(struct vnt_usb_send_context *tx_context,
 
 	vnt_fill_ieee80211_rts(tx_context, &buf->data, buf->duration);
 
-	return vnt_rxtx_datahead_ab(tx_context, &buf->data_head);
+	vnt_rxtx_datahead_ab(tx_context, &buf->data_head);
 }
 
-static u16 vnt_fill_cts_head(struct vnt_usb_send_context *tx_context,
-			     union vnt_tx_data_head *head)
+static void vnt_fill_cts_head(struct vnt_usb_send_context *tx_context,
+			      union vnt_tx_data_head *head)
 {
 	struct vnt_private *priv = tx_context->priv;
 	struct vnt_cts *buf = &head->cts_g;
@@ -349,11 +454,11 @@ static u16 vnt_fill_cts_head(struct vnt_usb_send_context *tx_context,
 
 	ether_addr_copy(buf->data.ra, priv->current_net_addr);
 
-	return vnt_rxtx_datahead_g(tx_context, &buf->data_head);
+	vnt_rxtx_datahead_g(tx_context, &buf->data_head);
 }
 
-static u16 vnt_rxtx_rts(struct vnt_usb_send_context *tx_context,
-			union vnt_tx_head *tx_head, bool need_mic)
+static void vnt_rxtx_rts(struct vnt_usb_send_context *tx_context,
+			 union vnt_tx_head *tx_head, bool need_mic)
 {
 	struct vnt_private *priv = tx_context->priv;
 	struct vnt_rrv_time_rts *buf = &tx_head->tx_rts.rts;
@@ -378,11 +483,11 @@ static u16 vnt_rxtx_rts(struct vnt_usb_send_context *tx_context,
 	if (need_mic)
 		head = &tx_head->tx_rts.tx.mic.head;
 
-	return vnt_rxtx_rts_g_head(tx_context, &head->rts_g);
+	vnt_rxtx_rts_g_head(tx_context, &head->rts_g);
 }
 
-static u16 vnt_rxtx_cts(struct vnt_usb_send_context *tx_context,
-			union vnt_tx_head *tx_head, bool need_mic)
+static void vnt_rxtx_cts(struct vnt_usb_send_context *tx_context,
+			 union vnt_tx_head *tx_head, bool need_mic)
 {
 	struct vnt_private *priv = tx_context->priv;
 	struct vnt_rrv_time_cts *buf = &tx_head->tx_cts.cts;
@@ -402,11 +507,12 @@ static u16 vnt_rxtx_cts(struct vnt_usb_send_context *tx_context,
 	if (need_mic)
 		head = &tx_head->tx_cts.tx.mic.head;
 
-	return vnt_fill_cts_head(tx_context, head);
+	vnt_fill_cts_head(tx_context, head);
 }
 
-static u16 vnt_rxtx_ab(struct vnt_usb_send_context *tx_context,
-		       union vnt_tx_head *tx_head, bool need_rts, bool need_mic)
+static void vnt_rxtx_ab(struct vnt_usb_send_context *tx_context,
+			union vnt_tx_head *tx_head,
+			bool need_rts, bool need_mic)
 {
 	struct vnt_private *priv = tx_context->priv;
 	struct vnt_rrv_time_ab *buf = &tx_head->tx_ab.ab;
@@ -429,16 +535,18 @@ static u16 vnt_rxtx_ab(struct vnt_usb_send_context *tx_context,
 			buf->rts_rrv_time = vnt_get_rtscts_rsvtime_le(priv, 2,
 				tx_context->pkt_type, frame_len, current_rate);
 
-		return vnt_rxtx_rts_ab_head(tx_context, &head->rts_ab);
+		vnt_rxtx_rts_ab_head(tx_context, &head->rts_ab);
+
+		return;
 	}
 
-	return vnt_rxtx_datahead_ab(tx_context, &head->data_head_ab);
+	vnt_rxtx_datahead_ab(tx_context, &head->data_head_ab);
 }
 
-static u16 vnt_generate_tx_parameter(struct vnt_usb_send_context *tx_context,
-				     struct vnt_tx_buffer *tx_buffer,
-				     struct vnt_mic_hdr **mic_hdr, u32 need_mic,
-				     bool need_rts)
+static void vnt_generate_tx_parameter(struct vnt_usb_send_context *tx_context,
+				      struct vnt_tx_buffer *tx_buffer,
+				      struct vnt_mic_hdr **mic_hdr,
+				      u32 need_mic, bool need_rts)
 {
 	if (tx_context->pkt_type == PK_TYPE_11GB ||
 	    tx_context->pkt_type == PK_TYPE_11GA) {
@@ -447,20 +555,23 @@ static u16 vnt_generate_tx_parameter(struct vnt_usb_send_context *tx_context,
 				*mic_hdr =
 					&tx_buffer->tx_head.tx_rts.tx.mic.hdr;
 
-			return vnt_rxtx_rts(tx_context, &tx_buffer->tx_head,
-					    need_mic);
+			vnt_rxtx_rts(tx_context, &tx_buffer->tx_head, need_mic);
+
+			return;
 		}
 
 		if (need_mic)
 			*mic_hdr = &tx_buffer->tx_head.tx_cts.tx.mic.hdr;
 
-		return vnt_rxtx_cts(tx_context, &tx_buffer->tx_head, need_mic);
+		vnt_rxtx_cts(tx_context, &tx_buffer->tx_head, need_mic);
+
+		return;
 	}
 
 	if (need_mic)
 		*mic_hdr = &tx_buffer->tx_head.tx_ab.tx.mic.hdr;
 
-	return vnt_rxtx_ab(tx_context, &tx_buffer->tx_head, need_rts, need_mic);
+	vnt_rxtx_ab(tx_context, &tx_buffer->tx_head, need_rts, need_mic);
 }
 
 static void vnt_fill_txkey(struct vnt_usb_send_context *tx_context,
@@ -547,7 +658,7 @@ int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb)
 	struct vnt_tx_fifo_head *tx_buffer_head;
 	struct vnt_usb_send_context *tx_context;
 	unsigned long flags;
-	u16 tx_bytes, tx_header_size, tx_body_size, current_rate, duration_id;
+	u16 tx_bytes, tx_header_size, tx_body_size;
 	u8 pkt_type;
 	bool need_rts = false;
 	bool need_mic = false;
@@ -556,14 +667,7 @@ int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb)
 
 	rate = ieee80211_get_tx_rate(priv->hw, info);
 
-	current_rate = rate->hw_value;
-	if (priv->current_rate != current_rate &&
-	    !(priv->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) {
-		priv->current_rate = current_rate;
-		vnt_schedule_command(priv, WLAN_CMD_SETPOWER);
-	}
-
-	if (current_rate > RATE_11M) {
+	if (rate->hw_value > RATE_11M) {
 		if (info->band == NL80211_BAND_5GHZ) {
 			pkt_type = PK_TYPE_11A;
 		} else {
@@ -593,7 +697,7 @@ int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb)
 	tx_context->pkt_type = pkt_type;
 	tx_context->need_ack = false;
 	tx_context->frame_len = skb->len + 4;
-	tx_context->tx_rate = current_rate;
+	tx_context->tx_rate =  rate->hw_value;
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
@@ -631,11 +735,6 @@ int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb)
 	if (ieee80211_has_retry(hdr->frame_control))
 		tx_buffer_head->fifo_ctl |= cpu_to_le16(FIFOCTL_LRETRY);
 
-	if (tx_rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
-		priv->preamble_type = PREAMBLE_SHORT;
-	else
-		priv->preamble_type = PREAMBLE_LONG;
-
 	if (tx_rate->flags & IEEE80211_TX_RC_USE_RTS_CTS) {
 		need_rts = true;
 		tx_buffer_head->fifo_ctl |= cpu_to_le16(FIFOCTL_RTS);
@@ -666,10 +765,10 @@ int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb)
 		tx_context->frame_len += tx_key->icv_len;
 	}
 
-	tx_buffer_head->current_rate = cpu_to_le16(current_rate);
+	tx_buffer_head->current_rate = cpu_to_le16(rate->hw_value);
 
-	duration_id = vnt_generate_tx_parameter(tx_context, tx_buffer, &mic_hdr,
-						need_mic, need_rts);
+	vnt_generate_tx_parameter(tx_context, tx_buffer, &mic_hdr,
+				  need_mic, need_rts);
 
 	tx_header_size = tx_context->tx_hdr_size;
 	if (!tx_header_size) {
diff --git a/drivers/staging/vt6656/rxtx.h b/drivers/staging/vt6656/rxtx.h
index 0e6226af7d41..3c36a4b893dc 100644
--- a/drivers/staging/vt6656/rxtx.h
+++ b/drivers/staging/vt6656/rxtx.h
@@ -23,6 +23,13 @@
 #define DEFAULT_MGN_LIFETIME_RES_64us	125  /* 64us */
 #define DEFAULT_MSDU_LIFETIME_RES_64us  8000
 
+/* Length, Service, and Signal fields of Phy for Tx */
+struct vnt_phy_field {
+	u8 signal;
+	u8 service;
+	__le16 len;
+} __packed;
+
 /* MIC HDR data header */
 struct vnt_mic_hdr {
 	u8 id;
diff --git a/drivers/staging/vt6656/wcmd.c b/drivers/staging/vt6656/wcmd.c
index 2c5250ca2801..0ccc87da394e 100644
--- a/drivers/staging/vt6656/wcmd.c
+++ b/drivers/staging/vt6656/wcmd.c
@@ -122,8 +122,7 @@ void vnt_run_command(struct work_struct *work)
 
 	case WLAN_CMD_SETPOWER_START:
 
-		vnt_rf_setpower(priv, priv->current_rate,
-				priv->hw->conf.chandef.chan->hw_value);
+		vnt_rf_setpower(priv, priv->hw->conf.chandef.chan);
 
 		break;
 
diff --git a/drivers/staging/wfx/Makefile b/drivers/staging/wfx/Makefile
index 0d9c1ed092f6..0e0cc982ceab 100644
--- a/drivers/staging/wfx/Makefile
+++ b/drivers/staging/wfx/Makefile
@@ -7,6 +7,7 @@ wfx-y := \
 	bh.o \
 	hwio.o \
 	fwio.o \
+	hif_tx_mib.o \
 	hif_tx.o \
 	hif_rx.o \
 	queue.o \
diff --git a/drivers/staging/wfx/TODO b/drivers/staging/wfx/TODO
index efcb7c6a5aa7..fca3332e42ce 100644
--- a/drivers/staging/wfx/TODO
+++ b/drivers/staging/wfx/TODO
@@ -1,26 +1,18 @@
 This is a list of things that need to be done to get this driver out of the
 staging directory.
 
-  - All structures defined in hif_api_*.h are intended to sent/received to/from
-    hardware. All their members whould be declared __le32 or __le16.
-    See:
-       https://lore.kernel.org/lkml/20191111202852.GX26530@ZenIV.linux.org.uk
+  - The HIF API is not yet clean enough.
 
-  - Once previous item done, it will be possible to audit the driver with
-    `sparse'. It will probably find tons of problems with big endian
-    architectures.
+  - Fix support for big endian architectures. See:
+       https://lore.kernel.org/lkml/20191111202852.GX26530@ZenIV.linux.org.uk
 
-  - hif_api_*.h whave been imported from firmware code. Some of the structures
-    are never used in driver.
+  - The pointers returned by allocation functions are always checked.
 
-  - Driver try to maintains power save status of the stations. However, this
-    work is already done by mac80211. sta_asleep_mask and pspoll_mask should be
-    dropped.
+  - The code that check the corectness of received message (in rx_helper()) can
+    be improved. See:
+       https://lore.kernel.org/driverdev-devel/2302785.6C7ODC2LYm@pc-42/
 
-  - wfx_tx_queues_get() should be reworked. It currently try compute itself the
-    QoS policy. However, firmware already do the job. Firmware would prefer to
-    have a few packets in each queue and be able to choose itself which queue to
-    use.
+  - Support for SDIO with external IRQ is broken.
 
   - As suggested by Felix, rate control could be improved following this idea:
         https://lore.kernel.org/lkml/3099559.gv3Q75KnN1@pc-42/
@@ -28,17 +20,8 @@ staging directory.
   - When driver is about to loose BSS, it forge its own Null Func request (see
     wfx_cqm_bssloss_sm()). It should use mechanism provided by mac80211.
 
-  - AP is actually is setup after a call to wfx_bss_info_changed(). Yet,
-    ieee80211_ops provide callback start_ap().
-
-  - The current process for joining a network is incredibly complex. Should be
-    reworked.
-
   - Monitoring mode is not implemented despite being mandatory by mac80211.
 
-  - "compatible" value are not correct. They should be "vendor,chip". See:
-       https://lore.kernel.org/driverdev-devel/5226570.CMH5hVlZcI@pc-42
-
   - The "state" field from wfx_vif should be replaced by "vif->type".
 
   - It seems that wfx_upload_keys() is useless.
@@ -49,12 +32,13 @@ staging directory.
   - Feature called "secure link" should be either developed (using kernel
     crypto API) or dropped.
 
+  - The device allows to filter multicast traffic. The code to support these
+    filters exists in the driver but it is disabled because it has never been
+    tested.
+
   - In wfx_cmd_send(), "async" allow to send command without waiting the reply.
     It may help in some situation, but it is not yet used. In add, it may cause
     some trouble:
       https://lore.kernel.org/driverdev-devel/alpine.DEB.2.21.1910041317381.2992@hadrien/
     So, fix it (by replacing the mutex with a semaphore) or drop it.
 
-  - Chip support P2P, but driver does not implement it.
-
-  - Chip support kind of Mesh, but driver does not implement it.
diff --git a/drivers/staging/wfx/bh.c b/drivers/staging/wfx/bh.c
index 9fcab00a3733..ba7fa0a7cd9a 100644
--- a/drivers/staging/wfx/bh.c
+++ b/drivers/staging/wfx/bh.c
@@ -108,8 +108,6 @@ static int rx_helper(struct wfx_dev *wdev, size_t read_len, int *is_cnf)
 			release_count = 1;
 		WARN(wdev->hif.tx_buffers_used < release_count, "corrupted buffer counter");
 		wdev->hif.tx_buffers_used -= release_count;
-		if (!wdev->hif.tx_buffers_used)
-			wake_up(&wdev->hif.tx_buffers_empty);
 	}
 	_trace_hif_recv(hif, wdev->hif.tx_buffers_used);
 
@@ -123,6 +121,8 @@ static int rx_helper(struct wfx_dev *wdev, size_t read_len, int *is_cnf)
 	skb_put(skb, hif->len);
 	// wfx_handle_rx takes care on SKB livetime
 	wfx_handle_rx(wdev, skb);
+	if (!wdev->hif.tx_buffers_used)
+		wake_up(&wdev->hif.tx_buffers_empty);
 
 	return piggyback;
 
diff --git a/drivers/staging/wfx/data_rx.c b/drivers/staging/wfx/data_rx.c
index c5b83fedeb55..c3b3edae3420 100644
--- a/drivers/staging/wfx/data_rx.c
+++ b/drivers/staging/wfx/data_rx.c
@@ -118,18 +118,6 @@ void wfx_rx_cb(struct wfx_vif *wvif,
 	    arg->rx_flags.match_uc_addr &&
 	    mgmt->u.action.category == WLAN_CATEGORY_BACK)
 		goto drop;
-	if (ieee80211_is_beacon(frame->frame_control) &&
-	    !arg->status && wvif->vif &&
-	    ether_addr_equal(ieee80211_get_SA(frame),
-			     wvif->vif->bss_conf.bssid)) {
-		/* Disable beacon filter once we're associated... */
-		if (wvif->disable_beacon_filter &&
-		    (wvif->vif->bss_conf.assoc ||
-		     wvif->vif->bss_conf.ibss_joined)) {
-			wvif->disable_beacon_filter = false;
-			schedule_work(&wvif->update_filtering_work);
-		}
-	}
 	ieee80211_rx_irqsafe(wvif->wdev->hw, skb);
 
 	return;
diff --git a/drivers/staging/wfx/data_tx.c b/drivers/staging/wfx/data_tx.c
index 42183c70d4df..30aa8c267cd0 100644
--- a/drivers/staging/wfx/data_tx.c
+++ b/drivers/staging/wfx/data_tx.c
@@ -6,6 +6,7 @@
  * Copyright (c) 2010, ST-Ericsson
  */
 #include <net/mac80211.h>
+#include <linux/etherdevice.h>
 
 #include "data_tx.h"
 #include "wfx.h"
@@ -16,12 +17,11 @@
 #include "traces.h"
 #include "hif_tx_mib.h"
 
-#define WFX_INVALID_RATE_ID    15
-#define WFX_LINK_ID_GC_TIMEOUT ((unsigned long)(10 * HZ))
-
 static int wfx_get_hw_rate(struct wfx_dev *wdev,
 			   const struct ieee80211_tx_rate *rate)
 {
+	struct ieee80211_supported_band *band;
+
 	if (rate->idx < 0)
 		return -1;
 	if (rate->flags & IEEE80211_TX_RC_MCS) {
@@ -33,7 +33,8 @@ static int wfx_get_hw_rate(struct wfx_dev *wdev,
 	}
 	// WFx only support 2GHz, else band information should be retrieved
 	// from ieee80211_tx_info
-	return wdev->hw->wiphy->bands[NL80211_BAND_2GHZ]->bitrates[rate->idx].hw_value;
+	band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];
+	return band->bitrates[rate->idx].hw_value;
 }
 
 /* TX policy cache implementation */
@@ -51,59 +52,6 @@ static void wfx_tx_policy_build(struct wfx_vif *wvif, struct tx_policy *policy,
 		if (rates[i].idx < 0)
 			break;
 	count = i;
-
-	/* HACK!!! Device has problems (at least) switching from
-	 * 54Mbps CTS to 1Mbps. This switch takes enormous amount
-	 * of time (100-200 ms), leading to valuable throughput drop.
-	 * As a workaround, additional g-rates are injected to the
-	 * policy.
-	 */
-	if (count == 2 && !(rates[0].flags & IEEE80211_TX_RC_MCS) &&
-	    rates[0].idx > 4 && rates[0].count > 2 &&
-	    rates[1].idx < 2) {
-		int mid_rate = (rates[0].idx + 4) >> 1;
-
-		/* Decrease number of retries for the initial rate */
-		rates[0].count -= 2;
-
-		if (mid_rate != 4) {
-			/* Keep fallback rate at 1Mbps. */
-			rates[3] = rates[1];
-
-			/* Inject 1 transmission on lowest g-rate */
-			rates[2].idx = 4;
-			rates[2].count = 1;
-			rates[2].flags = rates[1].flags;
-
-			/* Inject 1 transmission on mid-rate */
-			rates[1].idx = mid_rate;
-			rates[1].count = 1;
-
-			/* Fallback to 1 Mbps is a really bad thing,
-			 * so let's try to increase probability of
-			 * successful transmission on the lowest g rate
-			 * even more
-			 */
-			if (rates[0].count >= 3) {
-				--rates[0].count;
-				++rates[2].count;
-			}
-
-			/* Adjust amount of rates defined */
-			count += 2;
-		} else {
-			/* Keep fallback rate at 1Mbps. */
-			rates[2] = rates[1];
-
-			/* Inject 2 transmissions on lowest g-rate */
-			rates[1].idx = 4;
-			rates[1].count = 2;
-
-			/* Adjust amount of rates defined */
-			count += 1;
-		}
-	}
-
 	for (i = 0; i < IEEE80211_TX_MAX_RATES; ++i) {
 		int rateid;
 		u8 count;
@@ -171,7 +119,7 @@ static int wfx_tx_policy_get(struct wfx_vif *wvif,
 	if (list_empty(&cache->free)) {
 		WARN(1, "unable to get a valid Tx policy");
 		spin_unlock_bh(&cache->lock);
-		return WFX_INVALID_RATE_ID;
+		return HIF_TX_RETRY_POLICY_INVALID;
 	}
 	idx = wfx_tx_policy_find(cache, &wanted);
 	if (idx >= 0) {
@@ -189,10 +137,8 @@ static int wfx_tx_policy_get(struct wfx_vif *wvif,
 		idx = entry - cache->cache;
 	}
 	wfx_tx_policy_use(cache, &cache->cache[idx]);
-	if (list_empty(&cache->free)) {
-		/* Lock TX queues. */
-		wfx_tx_queues_lock(wvif->wdev);
-	}
+	if (list_empty(&cache->free))
+		ieee80211_stop_queues(wvif->wdev->hw);
 	spin_unlock_bh(&cache->lock);
 	return idx;
 }
@@ -202,15 +148,13 @@ static void wfx_tx_policy_put(struct wfx_vif *wvif, int idx)
 	int usage, locked;
 	struct tx_policy_cache *cache = &wvif->tx_policy_cache;
 
-	if (idx == WFX_INVALID_RATE_ID)
+	if (idx == HIF_TX_RETRY_POLICY_INVALID)
 		return;
 	spin_lock_bh(&cache->lock);
 	locked = list_empty(&cache->free);
 	usage = wfx_tx_policy_release(cache, &cache->cache[idx]);
-	if (locked && !usage) {
-		/* Unlock TX queues. */
-		wfx_tx_queues_unlock(wvif->wdev);
-	}
+	if (locked && !usage)
+		ieee80211_wake_queues(wvif->wdev->hw);
 	spin_unlock_bh(&cache->lock);
 }
 
@@ -218,15 +162,17 @@ static int wfx_tx_policy_upload(struct wfx_vif *wvif)
 {
 	struct tx_policy *policies = wvif->tx_policy_cache.cache;
 	u8 tmp_rates[12];
-	int i;
+	int i, is_used;
 
 	do {
 		spin_lock_bh(&wvif->tx_policy_cache.lock);
-		for (i = 0; i < HIF_MIB_NUM_TX_RATE_RETRY_POLICIES; ++i)
-			if (!policies[i].uploaded &&
-			    memzcmp(policies[i].rates, sizeof(policies[i].rates)))
+		for (i = 0; i < HIF_TX_RETRY_POLICY_MAX; ++i) {
+			is_used = memzcmp(policies[i].rates,
+					  sizeof(policies[i].rates));
+			if (!policies[i].uploaded && is_used)
 				break;
-		if (i < HIF_MIB_NUM_TX_RATE_RETRY_POLICIES) {
+		}
+		if (i < HIF_TX_RETRY_POLICY_MAX) {
 			policies[i].uploaded = true;
 			memcpy(tmp_rates, policies[i].rates, sizeof(tmp_rates));
 			spin_unlock_bh(&wvif->tx_policy_cache.lock);
@@ -234,7 +180,7 @@ static int wfx_tx_policy_upload(struct wfx_vif *wvif)
 		} else {
 			spin_unlock_bh(&wvif->tx_policy_cache.lock);
 		}
-	} while (i < HIF_MIB_NUM_TX_RATE_RETRY_POLICIES);
+	} while (i < HIF_TX_RETRY_POLICY_MAX);
 	return 0;
 }
 
@@ -244,9 +190,7 @@ void wfx_tx_policy_upload_work(struct work_struct *work)
 		container_of(work, struct wfx_vif, tx_policy_upload_work);
 
 	wfx_tx_policy_upload(wvif);
-
 	wfx_tx_unlock(wvif->wdev);
-	wfx_tx_queues_unlock(wvif->wdev);
 }
 
 void wfx_tx_policy_init(struct wfx_vif *wvif)
@@ -260,7 +204,7 @@ void wfx_tx_policy_init(struct wfx_vif *wvif)
 	INIT_LIST_HEAD(&cache->used);
 	INIT_LIST_HEAD(&cache->free);
 
-	for (i = 0; i < HIF_MIB_NUM_TX_RATE_RETRY_POLICIES; ++i)
+	for (i = 0; i < HIF_TX_RETRY_POLICY_MAX; ++i)
 		list_add(&cache->cache[i].link, &cache->free);
 }
 
@@ -281,16 +225,11 @@ static void wfx_tx_manage_pm(struct wfx_vif *wvif, struct ieee80211_hdr *hdr,
 			     struct wfx_tx_priv *tx_priv,
 			     struct ieee80211_sta *sta)
 {
-	u32 mask = ~BIT(tx_priv->raw_link_id);
 	struct wfx_sta_priv *sta_priv;
 	int tid = ieee80211_get_tid(hdr);
 
-	spin_lock_bh(&wvif->ps_state_lock);
-	if (ieee80211_is_auth(hdr->frame_control))
-		wvif->sta_asleep_mask &= mask;
-	spin_unlock_bh(&wvif->ps_state_lock);
-
 	if (sta) {
+		tx_priv->has_sta = true;
 		sta_priv = (struct wfx_sta_priv *)&sta->drv_priv;
 		spin_lock_bh(&sta_priv->lock);
 		sta_priv->buffered[tid]++;
@@ -299,9 +238,8 @@ static void wfx_tx_manage_pm(struct wfx_vif *wvif, struct ieee80211_hdr *hdr,
 	}
 }
 
-static u8 wfx_tx_get_raw_link_id(struct wfx_vif *wvif,
-				 struct ieee80211_sta *sta,
-				 struct ieee80211_hdr *hdr)
+static u8 wfx_tx_get_link_id(struct wfx_vif *wvif, struct ieee80211_sta *sta,
+			     struct ieee80211_hdr *hdr)
 {
 	struct wfx_sta_priv *sta_priv =
 		sta ? (struct wfx_sta_priv *)&sta->drv_priv : NULL;
@@ -313,7 +251,7 @@ static u8 wfx_tx_get_raw_link_id(struct wfx_vif *wvif,
 		return 0;
 	if (is_multicast_ether_addr(da))
 		return 0;
-	return WFX_LINK_ID_NO_ASSOC;
+	return HIF_LINK_ID_NOT_ASSOCIATED;
 }
 
 static void wfx_tx_fixup_rates(struct ieee80211_tx_rate *rates)
@@ -358,7 +296,8 @@ static void wfx_tx_fixup_rates(struct ieee80211_tx_rate *rates)
 		if (rates[i].idx == -1) {
 			rates[i].idx = 0;
 			rates[i].count = 8; // == hw->max_rate_tries
-			rates[i].flags = rates[i - 1].flags & IEEE80211_TX_RC_MCS;
+			rates[i].flags = rates[i - 1].flags &
+					 IEEE80211_TX_RC_MCS;
 			break;
 		}
 	}
@@ -375,24 +314,19 @@ static u8 wfx_tx_get_rate_id(struct wfx_vif *wvif,
 
 	rate_id = wfx_tx_policy_get(wvif,
 				    tx_info->driver_rates, &tx_policy_renew);
-	if (rate_id == WFX_INVALID_RATE_ID)
+	if (rate_id == HIF_TX_RETRY_POLICY_INVALID)
 		dev_warn(wvif->wdev->dev, "unable to get a valid Tx policy");
 
 	if (tx_policy_renew) {
-		/* FIXME: It's not so optimal to stop TX queues every now and
-		 * then.  Better to reimplement task scheduling with a counter.
-		 */
 		wfx_tx_lock(wvif->wdev);
-		wfx_tx_queues_lock(wvif->wdev);
-		if (!schedule_work(&wvif->tx_policy_upload_work)) {
-			wfx_tx_queues_unlock(wvif->wdev);
+		if (!schedule_work(&wvif->tx_policy_upload_work))
 			wfx_tx_unlock(wvif->wdev);
-		}
 	}
 	return rate_id;
 }
 
-static struct hif_ht_tx_parameters wfx_tx_get_tx_parms(struct wfx_dev *wdev, struct ieee80211_tx_info *tx_info)
+static struct hif_ht_tx_parameters wfx_tx_get_tx_parms(struct wfx_dev *wdev,
+						       struct ieee80211_tx_info *tx_info)
 {
 	struct ieee80211_tx_rate *rate = &tx_info->driver_rates[0];
 	struct hif_ht_tx_parameters ret = { };
@@ -429,7 +363,7 @@ static int wfx_tx_inner(struct wfx_vif *wvif, struct ieee80211_sta *sta,
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	int queue_id = tx_info->hw_queue;
+	int queue_id = skb_get_queue_mapping(skb);
 	size_t offset = (size_t)skb->data & 3;
 	int wmsg_len = sizeof(struct hif_msg) +
 			sizeof(struct hif_req_tx) + offset;
@@ -441,14 +375,8 @@ static int wfx_tx_inner(struct wfx_vif *wvif, struct ieee80211_sta *sta,
 	memset(tx_info->rate_driver_data, 0, sizeof(struct wfx_tx_priv));
 	// Fill tx_priv
 	tx_priv = (struct wfx_tx_priv *)tx_info->rate_driver_data;
-	tx_priv->raw_link_id = wfx_tx_get_raw_link_id(wvif, sta, hdr);
-	tx_priv->link_id = tx_priv->raw_link_id;
 	if (ieee80211_has_protected(hdr->frame_control))
 		tx_priv->hw_key = hw_key;
-	if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM)
-		tx_priv->link_id = WFX_LINK_ID_AFTER_DTIM;
-	if (sta && (sta->uapsd_queues & BIT(queue_id)))
-		tx_priv->link_id = WFX_LINK_ID_UAPSD;
 
 	// Fill hif_msg
 	WARN(skb_headroom(skb) < wmsg_len, "not enough space in skb");
@@ -461,7 +389,8 @@ static int wfx_tx_inner(struct wfx_vif *wvif, struct ieee80211_sta *sta,
 	hif_msg->id = HIF_REQ_ID_TX;
 	hif_msg->interface = wvif->id;
 	if (skb->len > wvif->wdev->hw_caps.size_inp_ch_buf) {
-		dev_warn(wvif->wdev->dev, "requested frame size (%d) is larger than maximum supported (%d)\n",
+		dev_warn(wvif->wdev->dev,
+			 "requested frame size (%d) is larger than maximum supported (%d)\n",
 			 skb->len, wvif->wdev->hw_caps.size_inp_ch_buf);
 		skb_pull(skb, wmsg_len);
 		return -EIO;
@@ -472,13 +401,14 @@ static int wfx_tx_inner(struct wfx_vif *wvif, struct ieee80211_sta *sta,
 	// packet_id just need to be unique on device. 32bits are more than
 	// necessary for that task, so we tae advantage of it to add some extra
 	// data for debug.
-	req->packet_id = queue_id << 28 |
-			 IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl)) << 16 |
-			 (atomic_add_return(1, &wvif->wdev->packet_id) & 0xFFFF);
+	req->packet_id = atomic_add_return(1, &wvif->wdev->packet_id) & 0xFFFF;
+	req->packet_id |= IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl)) << 16;
+	req->packet_id |= queue_id << 28;
+
 	req->data_flags.fc_offset = offset;
 	if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM)
 		req->data_flags.after_dtim = 1;
-	req->queue_id.peer_sta_id = tx_priv->raw_link_id;
+	req->queue_id.peer_sta_id = wfx_tx_get_link_id(wvif, sta, hdr);
 	// Queue index are inverted between firmware and Linux
 	req->queue_id.queue_id = 3 - queue_id;
 	req->ht_tx_parameters = wfx_tx_get_tx_parms(wvif->wdev, tx_info);
@@ -486,7 +416,7 @@ static int wfx_tx_inner(struct wfx_vif *wvif, struct ieee80211_sta *sta,
 
 	// Auxiliary operations
 	wfx_tx_manage_pm(wvif, hdr, tx_priv, sta);
-	wfx_tx_queue_put(wvif->wdev, &wvif->wdev->tx_queue[queue_id], skb);
+	wfx_tx_queues_put(wvif->wdev, skb);
 	if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM)
 		schedule_work(&wvif->update_tim_work);
 	wfx_bh_request_tx(wvif->wdev);
@@ -528,6 +458,45 @@ void wfx_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
 	ieee80211_tx_status_irqsafe(wdev->hw, skb);
 }
 
+static void wfx_notify_buffered_tx(struct wfx_vif *wvif, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_sta *sta;
+	struct wfx_sta_priv *sta_priv;
+	int tid = ieee80211_get_tid(hdr);
+
+	rcu_read_lock(); // protect sta
+	sta = ieee80211_find_sta(wvif->vif, hdr->addr1);
+	if (sta) {
+		sta_priv = (struct wfx_sta_priv *)&sta->drv_priv;
+		spin_lock_bh(&sta_priv->lock);
+		WARN(!sta_priv->buffered[tid], "inconsistent notification");
+		sta_priv->buffered[tid]--;
+		if (!sta_priv->buffered[tid])
+			ieee80211_sta_set_buffered(sta, tid, false);
+		spin_unlock_bh(&sta_priv->lock);
+	}
+	rcu_read_unlock();
+}
+
+static void wfx_skb_dtor(struct wfx_dev *wdev,
+			 struct sk_buff *skb, bool has_sta)
+{
+	struct hif_msg *hif = (struct hif_msg *)skb->data;
+	struct hif_req_tx *req = (struct hif_req_tx *)hif->body;
+	struct wfx_vif *wvif = wdev_to_wvif(wdev, hif->interface);
+	unsigned int offset = sizeof(struct hif_req_tx) +
+				sizeof(struct hif_msg) +
+				req->data_flags.fc_offset;
+
+	WARN_ON(!wvif);
+	skb_pull(skb, offset);
+	if (has_sta)
+		wfx_notify_buffered_tx(wvif, skb);
+	wfx_tx_policy_put(wvif, req->tx_flags.retry_policy_index);
+	ieee80211_tx_status_irqsafe(wdev->hw, skb);
+}
+
 void wfx_tx_confirm_cb(struct wfx_vif *wvif, const struct hif_cnf_tx *arg)
 {
 	int i;
@@ -536,6 +505,7 @@ void wfx_tx_confirm_cb(struct wfx_vif *wvif, const struct hif_cnf_tx *arg)
 	struct ieee80211_tx_rate *rate;
 	struct ieee80211_tx_info *tx_info;
 	const struct wfx_tx_priv *tx_priv;
+	bool has_sta;
 
 	skb = wfx_pending_get(wvif->wdev, arg->packet_id);
 	if (!skb) {
@@ -546,6 +516,7 @@ void wfx_tx_confirm_cb(struct wfx_vif *wvif, const struct hif_cnf_tx *arg)
 	}
 	tx_info = IEEE80211_SKB_CB(skb);
 	tx_priv = wfx_skb_tx_priv(skb);
+	has_sta = tx_priv->has_sta;
 	_trace_tx_stats(arg, skb,
 			wfx_pending_get_pkt_us_delay(wvif->wdev, skb));
 
@@ -560,7 +531,8 @@ void wfx_tx_confirm_cb(struct wfx_vif *wvif, const struct hif_cnf_tx *arg)
 		if (tx_count < rate->count &&
 		    arg->status == HIF_STATUS_RETRY_EXCEEDED &&
 		    arg->ack_failures)
-			dev_dbg(wvif->wdev->dev, "all retries were not consumed: %d != %d\n",
+			dev_dbg(wvif->wdev->dev,
+				"all retries were not consumed: %d != %d\n",
 				rate->count, tx_count);
 		if (tx_count <= rate->count && tx_count &&
 		    arg->txed_rate != wfx_get_hw_rate(wvif->wdev, rate))
@@ -590,9 +562,6 @@ void wfx_tx_confirm_cb(struct wfx_vif *wvif, const struct hif_cnf_tx *arg)
 	memset(tx_info->pad, 0, sizeof(tx_info->pad));
 
 	if (!arg->status) {
-		if (wvif->bss_loss_state &&
-		    arg->packet_id == wvif->bss_loss_confirm_id)
-			wfx_cqm_bssloss_sm(wvif, 0, 1, 0);
 		tx_info->status.tx_time =
 		arg->media_delay - arg->tx_queue_delay;
 		if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
@@ -600,53 +569,51 @@ void wfx_tx_confirm_cb(struct wfx_vif *wvif, const struct hif_cnf_tx *arg)
 		else
 			tx_info->flags |= IEEE80211_TX_STAT_ACK;
 	} else if (arg->status == HIF_REQUEUE) {
-		WARN(!arg->tx_result_flags.requeue, "incoherent status and result_flags");
+		WARN(!arg->tx_result_flags.requeue,
+		     "incoherent status and result_flags");
 		if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
 			wvif->after_dtim_tx_allowed = false; // DTIM period elapsed
 			schedule_work(&wvif->update_tim_work);
 		}
 		tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
-	} else {
-		if (wvif->bss_loss_state &&
-		    arg->packet_id == wvif->bss_loss_confirm_id)
-			wfx_cqm_bssloss_sm(wvif, 0, 0, 1);
 	}
-	wfx_pending_remove(wvif->wdev, skb);
+	wfx_skb_dtor(wvif->wdev, skb, has_sta);
 }
 
-static void wfx_notify_buffered_tx(struct wfx_vif *wvif, struct sk_buff *skb)
+void wfx_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+	       u32 queues, bool drop)
 {
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	struct ieee80211_sta *sta;
-	struct wfx_sta_priv *sta_priv;
-	int tid = ieee80211_get_tid(hdr);
+	const struct wfx_tx_priv *tx_priv;
+	struct wfx_dev *wdev = hw->priv;
+	struct sk_buff_head dropped;
+	struct wfx_queue *queue;
+	struct sk_buff *skb;
+	int vif_id = -1;
+	int i;
 
-	rcu_read_lock(); // protect sta
-	sta = ieee80211_find_sta(wvif->vif, hdr->addr1);
-	if (sta) {
-		sta_priv = (struct wfx_sta_priv *)&sta->drv_priv;
-		spin_lock_bh(&sta_priv->lock);
-		WARN(!sta_priv->buffered[tid], "inconsistent notification");
-		sta_priv->buffered[tid]--;
-		if (!sta_priv->buffered[tid])
-			ieee80211_sta_set_buffered(sta, tid, false);
-		spin_unlock_bh(&sta_priv->lock);
+	if (vif)
+		vif_id = ((struct wfx_vif *)vif->drv_priv)->id;
+	skb_queue_head_init(&dropped);
+	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+		if (!(BIT(i) & queues))
+			continue;
+		queue = &wdev->tx_queue[i];
+		if (drop)
+			wfx_tx_queue_drop(wdev, queue, vif_id, &dropped);
+		if (wdev->chip_frozen)
+			continue;
+		if (wait_event_timeout(wdev->tx_dequeue,
+				       wfx_tx_queue_empty(wdev, queue, vif_id),
+				       msecs_to_jiffies(1000)) <= 0)
+			dev_warn(wdev->dev,
+				 "frames queued while flushing tx queues?");
+	}
+	wfx_tx_flush(wdev);
+	if (wdev->chip_frozen)
+		wfx_pending_drop(wdev, &dropped);
+	while ((skb = skb_dequeue(&dropped)) != NULL) {
+		tx_priv = wfx_skb_tx_priv(skb);
+		wfx_skb_dtor(wdev, skb, tx_priv->has_sta);
 	}
-	rcu_read_unlock();
 }
 
-void wfx_skb_dtor(struct wfx_dev *wdev, struct sk_buff *skb)
-{
-	struct hif_msg *hif = (struct hif_msg *)skb->data;
-	struct hif_req_tx *req = (struct hif_req_tx *)hif->body;
-	struct wfx_vif *wvif = wdev_to_wvif(wdev, hif->interface);
-	unsigned int offset = sizeof(struct hif_req_tx) +
-				sizeof(struct hif_msg) +
-				req->data_flags.fc_offset;
-
-	WARN_ON(!wvif);
-	skb_pull(skb, offset);
-	wfx_notify_buffered_tx(wvif, skb);
-	wfx_tx_policy_put(wvif, req->tx_flags.retry_policy_index);
-	ieee80211_tx_status_irqsafe(wdev->hw, skb);
-}
diff --git a/drivers/staging/wfx/data_tx.h b/drivers/staging/wfx/data_tx.h
index c545dd75449b..54fff24508fb 100644
--- a/drivers/staging/wfx/data_tx.h
+++ b/drivers/staging/wfx/data_tx.h
@@ -26,7 +26,7 @@ struct tx_policy {
 };
 
 struct tx_policy_cache {
-	struct tx_policy cache[HIF_MIB_NUM_TX_RATE_RETRY_POLICIES];
+	struct tx_policy cache[HIF_TX_RETRY_POLICY_MAX];
 	// FIXME: use a trees and drop hash from tx_policy
 	struct list_head used;
 	struct list_head free;
@@ -36,8 +36,7 @@ struct tx_policy_cache {
 struct wfx_tx_priv {
 	ktime_t xmit_timestamp;
 	struct ieee80211_key_conf *hw_key;
-	u8 link_id;
-	u8 raw_link_id;
+	bool has_sta;
 } __packed;
 
 void wfx_tx_policy_init(struct wfx_vif *wvif);
@@ -46,7 +45,8 @@ void wfx_tx_policy_upload_work(struct work_struct *work);
 void wfx_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
 	    struct sk_buff *skb);
 void wfx_tx_confirm_cb(struct wfx_vif *wvif, const struct hif_cnf_tx *arg);
-void wfx_skb_dtor(struct wfx_dev *wdev, struct sk_buff *skb);
+void wfx_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+	       u32 queues, bool drop);
 
 static inline struct wfx_tx_priv *wfx_skb_tx_priv(struct sk_buff *skb)
 {
diff --git a/drivers/staging/wfx/debug.c b/drivers/staging/wfx/debug.c
index 1164aba118a1..2fae6c913b01 100644
--- a/drivers/staging/wfx/debug.c
+++ b/drivers/staging/wfx/debug.c
@@ -61,19 +61,26 @@ const char *get_reg_name(unsigned long id)
 
 static int wfx_counters_show(struct seq_file *seq, void *v)
 {
-	int ret;
+	int ret, i;
 	struct wfx_dev *wdev = seq->private;
-	struct hif_mib_extended_count_table counters;
+	struct hif_mib_extended_count_table counters[3];
+
+	for (i = 0; i < ARRAY_SIZE(counters); i++) {
+		ret = hif_get_counters_table(wdev, i, counters + i);
+		if (ret < 0)
+			return ret;
+		if (ret > 0)
+			return -EIO;
+	}
 
-	ret = hif_get_counters_table(wdev, &counters);
-	if (ret < 0)
-		return ret;
-	if (ret > 0)
-		return -EIO;
+	seq_printf(seq, "%-24s %12s %12s %12s\n",
+		   "", "global", "iface 0", "iface 1");
 
 #define PUT_COUNTER(name) \
-	seq_printf(seq, "%24s %d\n", #name ":",\
-		   le32_to_cpu(counters.count_##name))
+	seq_printf(seq, "%-24s %12d %12d %12d\n", #name, \
+		   le32_to_cpu(counters[2].count_##name), \
+		   le32_to_cpu(counters[0].count_##name), \
+		   le32_to_cpu(counters[1].count_##name))
 
 	PUT_COUNTER(tx_packets);
 	PUT_COUNTER(tx_multicast_frames);
@@ -105,6 +112,12 @@ static int wfx_counters_show(struct seq_file *seq, void *v)
 
 #undef PUT_COUNTER
 
+	for (i = 0; i < ARRAY_SIZE(counters[0].reserved); i++)
+		seq_printf(seq, "reserved[%02d]%12s %12d %12d %12d\n", i, "",
+			   le32_to_cpu(counters[2].reserved[i]),
+			   le32_to_cpu(counters[0].reserved[i]),
+			   le32_to_cpu(counters[1].reserved[i]));
+
 	return 0;
 }
 DEFINE_SHOW_ATTRIBUTE(wfx_counters);
diff --git a/drivers/staging/wfx/hif_api_cmd.h b/drivers/staging/wfx/hif_api_cmd.h
index 071b71e2a107..6f70801949bb 100644
--- a/drivers/staging/wfx/hif_api_cmd.h
+++ b/drivers/staging/wfx/hif_api_cmd.h
@@ -10,56 +10,54 @@
 
 #include "hif_api_general.h"
 
-#define HIF_NUM_AC                             4
-
 #define HIF_API_SSID_SIZE                      API_SSID_SIZE
 
 enum hif_requests_ids {
-	HIF_REQ_ID_RESET                             = 0x0a,
-	HIF_REQ_ID_READ_MIB                          = 0x05,
-	HIF_REQ_ID_WRITE_MIB                         = 0x06,
-	HIF_REQ_ID_START_SCAN                        = 0x07,
-	HIF_REQ_ID_STOP_SCAN                         = 0x08,
-	HIF_REQ_ID_TX                                = 0x04,
-	HIF_REQ_ID_JOIN                              = 0x0b,
-	HIF_REQ_ID_SET_PM_MODE                       = 0x10,
-	HIF_REQ_ID_SET_BSS_PARAMS                    = 0x11,
-	HIF_REQ_ID_ADD_KEY                           = 0x0c,
-	HIF_REQ_ID_REMOVE_KEY                        = 0x0d,
-	HIF_REQ_ID_EDCA_QUEUE_PARAMS                 = 0x13,
-	HIF_REQ_ID_START                             = 0x17,
-	HIF_REQ_ID_BEACON_TRANSMIT                   = 0x18,
-	HIF_REQ_ID_UPDATE_IE                         = 0x1b,
-	HIF_REQ_ID_MAP_LINK                          = 0x1c,
+	HIF_REQ_ID_RESET                = 0x0a,
+	HIF_REQ_ID_READ_MIB             = 0x05,
+	HIF_REQ_ID_WRITE_MIB            = 0x06,
+	HIF_REQ_ID_START_SCAN           = 0x07,
+	HIF_REQ_ID_STOP_SCAN            = 0x08,
+	HIF_REQ_ID_TX                   = 0x04,
+	HIF_REQ_ID_JOIN                 = 0x0b,
+	HIF_REQ_ID_SET_PM_MODE          = 0x10,
+	HIF_REQ_ID_SET_BSS_PARAMS       = 0x11,
+	HIF_REQ_ID_ADD_KEY              = 0x0c,
+	HIF_REQ_ID_REMOVE_KEY           = 0x0d,
+	HIF_REQ_ID_EDCA_QUEUE_PARAMS    = 0x13,
+	HIF_REQ_ID_START                = 0x17,
+	HIF_REQ_ID_BEACON_TRANSMIT      = 0x18,
+	HIF_REQ_ID_UPDATE_IE            = 0x1b,
+	HIF_REQ_ID_MAP_LINK             = 0x1c,
 };
 
 enum hif_confirmations_ids {
-	HIF_CNF_ID_RESET                             = 0x0a,
-	HIF_CNF_ID_READ_MIB                          = 0x05,
-	HIF_CNF_ID_WRITE_MIB                         = 0x06,
-	HIF_CNF_ID_START_SCAN                        = 0x07,
-	HIF_CNF_ID_STOP_SCAN                         = 0x08,
-	HIF_CNF_ID_TX                                = 0x04,
-	HIF_CNF_ID_MULTI_TRANSMIT                    = 0x1e,
-	HIF_CNF_ID_JOIN                              = 0x0b,
-	HIF_CNF_ID_SET_PM_MODE                       = 0x10,
-	HIF_CNF_ID_SET_BSS_PARAMS                    = 0x11,
-	HIF_CNF_ID_ADD_KEY                           = 0x0c,
-	HIF_CNF_ID_REMOVE_KEY                        = 0x0d,
-	HIF_CNF_ID_EDCA_QUEUE_PARAMS                 = 0x13,
-	HIF_CNF_ID_START                             = 0x17,
-	HIF_CNF_ID_BEACON_TRANSMIT                   = 0x18,
-	HIF_CNF_ID_UPDATE_IE                         = 0x1b,
-	HIF_CNF_ID_MAP_LINK                          = 0x1c,
+	HIF_CNF_ID_RESET                = 0x0a,
+	HIF_CNF_ID_READ_MIB             = 0x05,
+	HIF_CNF_ID_WRITE_MIB            = 0x06,
+	HIF_CNF_ID_START_SCAN           = 0x07,
+	HIF_CNF_ID_STOP_SCAN            = 0x08,
+	HIF_CNF_ID_TX                   = 0x04,
+	HIF_CNF_ID_MULTI_TRANSMIT       = 0x1e,
+	HIF_CNF_ID_JOIN                 = 0x0b,
+	HIF_CNF_ID_SET_PM_MODE          = 0x10,
+	HIF_CNF_ID_SET_BSS_PARAMS       = 0x11,
+	HIF_CNF_ID_ADD_KEY              = 0x0c,
+	HIF_CNF_ID_REMOVE_KEY           = 0x0d,
+	HIF_CNF_ID_EDCA_QUEUE_PARAMS    = 0x13,
+	HIF_CNF_ID_START                = 0x17,
+	HIF_CNF_ID_BEACON_TRANSMIT      = 0x18,
+	HIF_CNF_ID_UPDATE_IE            = 0x1b,
+	HIF_CNF_ID_MAP_LINK             = 0x1c,
 };
 
 enum hif_indications_ids {
-	HIF_IND_ID_RX                                = 0x84,
-	HIF_IND_ID_SCAN_CMPL                         = 0x86,
-	HIF_IND_ID_JOIN_COMPLETE                     = 0x8f,
-	HIF_IND_ID_SET_PM_MODE_CMPL                  = 0x89,
-	HIF_IND_ID_SUSPEND_RESUME_TX                 = 0x8c,
-	HIF_IND_ID_EVENT                             = 0x85
+	HIF_IND_ID_RX                   = 0x84,
+	HIF_IND_ID_SCAN_CMPL            = 0x86,
+	HIF_IND_ID_JOIN_COMPLETE        = 0x8f,
+	HIF_IND_ID_SET_PM_MODE_CMPL     = 0x89,
+	HIF_IND_ID_SUSPEND_RESUME_TX    = 0x8c,
+	HIF_IND_ID_EVENT                = 0x85
 };
 
 union hif_commands_ids {
@@ -69,26 +67,26 @@ union hif_commands_ids {
 };
 
 enum hif_status {
-	HIF_STATUS_SUCCESS                         = 0x0,
-	HIF_STATUS_FAILURE                         = 0x1,
-	HIF_INVALID_PARAMETER                      = 0x2,
-	HIF_STATUS_WARNING                         = 0x3,
-	HIF_ERROR_UNSUPPORTED_MSG_ID               = 0x4,
-	HIF_STATUS_DECRYPTFAILURE                  = 0x10,
-	HIF_STATUS_MICFAILURE                      = 0x11,
-	HIF_STATUS_NO_KEY_FOUND                    = 0x12,
-	HIF_STATUS_RETRY_EXCEEDED                  = 0x13,
-	HIF_STATUS_TX_LIFETIME_EXCEEDED            = 0x14,
-	HIF_REQUEUE                                = 0x15,
-	HIF_STATUS_REFUSED                         = 0x16,
-	HIF_STATUS_BUSY                            = 0x17
+	HIF_STATUS_SUCCESS              = 0x0,
+	HIF_STATUS_FAILURE              = 0x1,
+	HIF_INVALID_PARAMETER           = 0x2,
+	HIF_STATUS_WARNING              = 0x3,
+	HIF_ERROR_UNSUPPORTED_MSG_ID    = 0x4,
+	HIF_STATUS_DECRYPTFAILURE       = 0x10,
+	HIF_STATUS_MICFAILURE           = 0x11,
+	HIF_STATUS_NO_KEY_FOUND         = 0x12,
+	HIF_STATUS_RETRY_EXCEEDED       = 0x13,
+	HIF_STATUS_TX_LIFETIME_EXCEEDED = 0x14,
+	HIF_REQUEUE                     = 0x15,
+	HIF_STATUS_REFUSED              = 0x16,
+	HIF_STATUS_BUSY                 = 0x17
 };
 
 struct hif_reset_flags {
-	u8    reset_stat:1;
-	u8    reset_all_int:1;
-	u8    reserved1:6;
-	u8    reserved2[3];
+	u8     reset_stat:1;
+	u8     reset_all_int:1;
+	u8     reserved1:6;
+	u8     reserved2[3];
 } __packed;
 
 struct hif_req_reset {
@@ -96,117 +94,101 @@ struct hif_req_reset {
 } __packed;
 
 struct hif_req_read_mib {
-	u16   mib_id;
-	u16   reserved;
+	__le16 mib_id;
+	__le16 reserved;
 } __packed;
 
 struct hif_cnf_read_mib {
-	u32   status;
-	u16   mib_id;
-	u16   length;
-	u8    mib_data[];
+	__le32 status;
+	__le16 mib_id;
+	__le16 length;
+	u8     mib_data[];
 } __packed;
 
 struct hif_req_write_mib {
-	u16   mib_id;
-	u16   length;
-	u8    mib_data[];
+	__le16 mib_id;
+	__le16 length;
+	u8     mib_data[];
 } __packed;
 
 struct hif_cnf_write_mib {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_ie_flags {
-	u8    beacon:1;
-	u8    probe_resp:1;
-	u8    probe_req:1;
-	u8    reserved1:5;
-	u8    reserved2;
+	u8     beacon:1;
+	u8     probe_resp:1;
+	u8     probe_req:1;
+	u8     reserved1:5;
+	u8     reserved2;
 } __packed;
 
 struct hif_ie_tlv {
-	u8    type;
-	u8    length;
-	u8    data[];
+	u8     type;
+	u8     length;
+	u8     data[];
 } __packed;
 
 struct hif_req_update_ie {
 	struct hif_ie_flags ie_flags;
-	u16   num_ies;
+	__le16 num_ies;
 	struct hif_ie_tlv ie[];
 } __packed;
 
 struct hif_cnf_update_ie {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_scan_type {
-	u8    type:1;
-	u8    mode:1;
-	u8    reserved:6;
+	u8     type:1;
+	u8     mode:1;
+	u8     reserved:6;
 } __packed;
 
 struct hif_scan_flags {
-	u8    fbg:1;
-	u8    reserved1:1;
-	u8    pre:1;
-	u8    reserved2:5;
+	u8     fbg:1;
+	u8     reserved1:1;
+	u8     pre:1;
+	u8     reserved2:5;
 } __packed;
 
 struct hif_auto_scan_param {
-	u16   interval;
-	u8    reserved;
+	__le16 interval;
+	u8     reserved;
 	s8     rssi_thr;
 } __packed;
 
 struct hif_ssid_def {
-	u32   ssid_length;
-	u8    ssid[HIF_API_SSID_SIZE];
+	__le32 ssid_length;
+	u8     ssid[HIF_API_SSID_SIZE];
 } __packed;
 
 #define HIF_API_MAX_NB_SSIDS                           2
 #define HIF_API_MAX_NB_CHANNELS                       14
 
-struct hif_req_start_scan {
-	u8    band;
-	struct hif_scan_type scan_type;
-	struct hif_scan_flags scan_flags;
-	u8    max_transmit_rate;
-	struct hif_auto_scan_param auto_scan_param;
-	u8    num_of_probe_requests;
-	u8    probe_delay;
-	u8    num_of_ssids;
-	u8    num_of_channels;
-	u32   min_channel_time;
-	u32   max_channel_time;
-	s32    tx_power_level;
-	u8    ssid_and_channel_lists[];
-} __packed;
-
 struct hif_req_start_scan_alt {
-	u8    band;
+	u8     band;
 	struct hif_scan_type scan_type;
 	struct hif_scan_flags scan_flags;
-	u8    max_transmit_rate;
+	u8     max_transmit_rate;
 	struct hif_auto_scan_param auto_scan_param;
-	u8    num_of_probe_requests;
-	u8    probe_delay;
-	u8    num_of_ssids;
-	u8    num_of_channels;
-	u32   min_channel_time;
-	u32   max_channel_time;
-	s32    tx_power_level;
+	u8     num_of_probe_requests;
+	u8     probe_delay;
+	u8     num_of_ssids;
+	u8     num_of_channels;
+	__le32 min_channel_time;
+	__le32 max_channel_time;
+	__le32 tx_power_level; // signed value
 	struct hif_ssid_def ssid_def[HIF_API_MAX_NB_SSIDS];
-	u8    channel_list[];
+	u8     channel_list[];
 } __packed;
 
 struct hif_cnf_start_scan {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_cnf_stop_scan {
-	u32   status;
+	__le32 status;
 } __packed;
 
 enum hif_pm_mode_status {
@@ -216,10 +198,10 @@ enum hif_pm_mode_status {
 };
 
 struct hif_ind_scan_cmpl {
-	u32   status;
-	u8    pm_mode;
-	u8    num_channels_completed;
-	u16   reserved;
+	__le32 status;
+	u8     pm_mode;
+	u8     num_channels_completed;
+	__le16 reserved;
 } __packed;
 
 enum hif_queue_id {
@@ -241,46 +223,46 @@ enum hif_stbc {
 };
 
 struct hif_queue {
-	u8    queue_id:2;
-	u8    peer_sta_id:4;
-	u8    reserved:2;
+	u8     queue_id:2;
+	u8     peer_sta_id:4;
+	u8     reserved:2;
 } __packed;
 
 struct hif_data_flags {
-	u8    more:1;
-	u8    fc_offset:3;
-	u8    after_dtim:1;
-	u8    reserved:3;
+	u8     more:1;
+	u8     fc_offset:3;
+	u8     after_dtim:1;
+	u8     reserved:3;
 } __packed;
 
 struct hif_tx_flags {
-	u8    start_exp:1;
-	u8    reserved:3;
-	u8    retry_policy_index:4;
+	u8     start_exp:1;
+	u8     reserved:3;
+	u8     retry_policy_index:4;
 } __packed;
 
 struct hif_ht_tx_parameters {
-	u8    frame_format:4;
-	u8    fec_coding:1;
-	u8    short_gi:1;
-	u8    reserved1:1;
-	u8    stbc:1;
-	u8    reserved2;
-	u8    aggregation:1;
-	u8    reserved3:7;
-	u8    reserved4;
+	u8     frame_format:4;
+	u8     fec_coding:1;
+	u8     short_gi:1;
+	u8     reserved1:1;
+	u8     stbc:1;
+	u8     reserved2;
+	u8     aggregation:1;
+	u8     reserved3:7;
+	u8     reserved4;
 } __packed;
 
 struct hif_req_tx {
-	u32   packet_id;
-	u8    max_tx_rate;
+	__le32 packet_id;
+	u8     max_tx_rate;
 	struct hif_queue queue_id;
 	struct hif_data_flags data_flags;
 	struct hif_tx_flags tx_flags;
-	u32   reserved;
-	u32   expire_time;
+	__le32 reserved;
+	__le32 expire_time;
 	struct hif_ht_tx_parameters ht_tx_parameters;
-	u8    frame[];
+	u8     frame[];
 } __packed;
 
 enum hif_qos_ackplcy {
@@ -291,26 +273,26 @@ enum hif_qos_ackplcy {
 };
 
 struct hif_tx_result_flags {
-	u8    aggr:1;
-	u8    requeue:1;
-	u8    ack_policy:2;
-	u8    txop_limit:1;
-	u8    reserved1:3;
-	u8    reserved2;
+	u8     aggr:1;
+	u8     requeue:1;
+	u8     ack_policy:2;
+	u8     txop_limit:1;
+	u8     reserved1:3;
+	u8     reserved2;
 } __packed;
 
 struct hif_cnf_tx {
-	u32   status;
-	u32   packet_id;
-	u8    txed_rate;
-	u8    ack_failures;
+	__le32 status;
+	__le32 packet_id;
+	u8     txed_rate;
+	u8     ack_failures;
 	struct hif_tx_result_flags tx_result_flags;
-	u32   media_delay;
-	u32   tx_queue_delay;
+	__le32 media_delay;
+	__le32 tx_queue_delay;
 } __packed;
 
 struct hif_cnf_multi_transmit {
-	u32   num_tx_confs;
+	__le32 num_tx_confs;
 	struct hif_cnf_tx   tx_conf_payload[];
 } __packed;
 
@@ -323,147 +305,147 @@ enum hif_ri_flags_encrypt {
 };
 
 struct hif_rx_flags {
-	u8    encryp:3;
-	u8    in_aggr:1;
-	u8    first_aggr:1;
-	u8    last_aggr:1;
-	u8    defrag:1;
-	u8    beacon:1;
-	u8    tim:1;
-	u8    bitmap:1;
-	u8    match_ssid:1;
-	u8    match_bssid:1;
-	u8    more:1;
-	u8    reserved1:1;
-	u8    ht:1;
-	u8    stbc:1;
-	u8    match_uc_addr:1;
-	u8    match_mc_addr:1;
-	u8    match_bc_addr:1;
-	u8    key_type:1;
-	u8    key_index:4;
-	u8    reserved2:1;
-	u8    peer_sta_id:4;
-	u8    reserved3:2;
-	u8    reserved4:1;
+	u8     encryp:3;
+	u8     in_aggr:1;
+	u8     first_aggr:1;
+	u8     last_aggr:1;
+	u8     defrag:1;
+	u8     beacon:1;
+	u8     tim:1;
+	u8     bitmap:1;
+	u8     match_ssid:1;
+	u8     match_bssid:1;
+	u8     more:1;
+	u8     reserved1:1;
+	u8     ht:1;
+	u8     stbc:1;
+	u8     match_uc_addr:1;
+	u8     match_mc_addr:1;
+	u8     match_bc_addr:1;
+	u8     key_type:1;
+	u8     key_index:4;
+	u8     reserved2:1;
+	u8     peer_sta_id:4;
+	u8     reserved3:2;
+	u8     reserved4:1;
 } __packed;
 
 struct hif_ind_rx {
-	u32   status;
-	u16   channel_number;
-	u8    rxed_rate;
-	u8    rcpi_rssi;
+	__le32 status;
+	__le16 channel_number;
+	u8     rxed_rate;
+	u8     rcpi_rssi;
 	struct hif_rx_flags rx_flags;
-	u8    frame[];
+	u8     frame[];
 } __packed;
 
 
 struct hif_req_edca_queue_params {
-	u8    queue_id;
-	u8    reserved1;
-	u8    aifsn;
-	u8    reserved2;
-	u16   cw_min;
-	u16   cw_max;
-	u16   tx_op_limit;
-	u16   allowed_medium_time;
-	u32   reserved3;
+	u8     queue_id;
+	u8     reserved1;
+	u8     aifsn;
+	u8     reserved2;
+	__le16 cw_min;
+	__le16 cw_max;
+	__le16 tx_op_limit;
+	__le16 allowed_medium_time;
+	__le32 reserved3;
 } __packed;
 
 struct hif_cnf_edca_queue_params {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_join_flags {
-	u8    reserved1:2;
-	u8    force_no_beacon:1;
-	u8    force_with_ind:1;
-	u8    reserved2:4;
+	u8     reserved1:2;
+	u8     force_no_beacon:1;
+	u8     force_with_ind:1;
+	u8     reserved2:4;
 } __packed;
 
 struct hif_req_join {
-	u8    infrastructure_bss_mode:1;
-	u8    reserved1:7;
-	u8    band;
-	u16   channel_number;
-	u8    bssid[ETH_ALEN];
-	u16   atim_window;
-	u8    short_preamble:1;
-	u8    reserved2:7;
-	u8    probe_for_join;
-	u8    reserved3;
+	u8     infrastructure_bss_mode:1;
+	u8     reserved1:7;
+	u8     band;
+	__le16 channel_number;
+	u8     bssid[ETH_ALEN];
+	__le16 atim_window;
+	u8     short_preamble:1;
+	u8     reserved2:7;
+	u8     probe_for_join;
+	u8     reserved3;
 	struct hif_join_flags join_flags;
-	u32   ssid_length;
-	u8    ssid[HIF_API_SSID_SIZE];
-	u32   beacon_interval;
-	u32   basic_rate_set;
+	__le32 ssid_length;
+	u8     ssid[HIF_API_SSID_SIZE];
+	__le32 beacon_interval;
+	__le32 basic_rate_set;
 } __packed;
 
 struct hif_cnf_join {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_ind_join_complete {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_bss_flags {
-	u8    lost_count_only:1;
-	u8    reserved:7;
+	u8     lost_count_only:1;
+	u8     reserved:7;
 } __packed;
 
 struct hif_req_set_bss_params {
 	struct hif_bss_flags bss_flags;
-	u8    beacon_lost_count;
-	u16   aid;
-	u32   operational_rate_set;
+	u8     beacon_lost_count;
+	__le16 aid;
+	__le32 operational_rate_set;
 } __packed;
 
 struct hif_cnf_set_bss_params {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_pm_mode {
-	u8    enter_psm:1;
-	u8    reserved:6;
-	u8    fast_psm:1;
+	u8     enter_psm:1;
+	u8     reserved:6;
+	u8     fast_psm:1;
 } __packed;
 
 struct hif_req_set_pm_mode {
 	struct hif_pm_mode pm_mode;
-	u8    fast_psm_idle_period;
-	u8    ap_psm_change_period;
-	u8    min_auto_ps_poll_period;
+	u8     fast_psm_idle_period;
+	u8     ap_psm_change_period;
+	u8     min_auto_ps_poll_period;
 } __packed;
 
 struct hif_cnf_set_pm_mode {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_ind_set_pm_mode_cmpl {
-	u32   status;
-	u8    pm_mode;
-	u8    reserved[3];
+	__le32 status;
+	u8     pm_mode;
+	u8     reserved[3];
 } __packed;
 
 
 struct hif_req_start {
-	u8    mode;
-	u8    band;
-	u16   channel_number;
-	u32   reserved1;
-	u32   beacon_interval;
-	u8    dtim_period;
-	u8    short_preamble:1;
-	u8    reserved2:7;
-	u8    reserved3;
-	u8    ssid_length;
-	u8    ssid[HIF_API_SSID_SIZE];
-	u32   basic_rate_set;
+	u8     mode;
+	u8     band;
+	__le16 channel_number;
+	__le32 reserved1;
+	__le32 beacon_interval;
+	u8     dtim_period;
+	u8     short_preamble:1;
+	u8     reserved2:7;
+	u8     reserved3;
+	u8     ssid_length;
+	u8     ssid[HIF_API_SSID_SIZE];
+	__le32 basic_rate_set;
 } __packed;
 
 struct hif_cnf_start {
-	u32   status;
+	__le32 status;
 } __packed;
 
 enum hif_beacon {
@@ -472,46 +454,49 @@ enum hif_beacon {
 };
 
 struct hif_req_beacon_transmit {
-	u8    enable_beaconing;
-	u8    reserved[3];
+	u8     enable_beaconing;
+	u8     reserved[3];
 } __packed;
 
 struct hif_cnf_beacon_transmit {
-	u32   status;
+	__le32 status;
 } __packed;
 
+#define HIF_LINK_ID_MAX            14
+#define HIF_LINK_ID_NOT_ASSOCIATED (HIF_LINK_ID_MAX + 1)
+
 enum hif_sta_map_direction {
 	HIF_STA_MAP                       = 0x0,
 	HIF_STA_UNMAP                     = 0x1
 };
 
 struct hif_map_link_flags {
-	u8    map_direction:1;
-	u8    mfpc:1;
-	u8    reserved:6;
+	u8     map_direction:1;
+	u8     mfpc:1;
+	u8     reserved:6;
 } __packed;
 
 struct hif_req_map_link {
-	u8    mac_addr[ETH_ALEN];
+	u8     mac_addr[ETH_ALEN];
 	struct hif_map_link_flags map_link_flags;
-	u8    peer_sta_id;
+	u8     peer_sta_id;
 } __packed;
 
 struct hif_cnf_map_link {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_suspend_resume_flags {
-	u8    resume:1;
-	u8    reserved1:2;
-	u8    bc_mc_only:1;
-	u8    reserved2:4;
-	u8    reserved3;
+	u8     resume:1;
+	u8     reserved1:2;
+	u8     bc_mc_only:1;
+	u8     reserved2:4;
+	u8     reserved3;
 } __packed;
 
 struct hif_ind_suspend_resume_tx {
 	struct hif_suspend_resume_flags suspend_resume_flags;
-	u16   peer_sta_set;
+	__le16 peer_sta_set;
 } __packed;
 
 
@@ -541,102 +526,102 @@ enum hif_key_type {
 };
 
 struct hif_wep_pairwise_key {
-	u8    peer_address[ETH_ALEN];
-	u8    reserved;
-	u8    key_length;
-	u8    key_data[HIF_API_WEP_KEY_DATA_SIZE];
+	u8     peer_address[ETH_ALEN];
+	u8     reserved;
+	u8     key_length;
+	u8     key_data[HIF_API_WEP_KEY_DATA_SIZE];
 } __packed;
 
 struct hif_wep_group_key {
-	u8    key_id;
-	u8    key_length;
-	u8    reserved[2];
-	u8    key_data[HIF_API_WEP_KEY_DATA_SIZE];
+	u8     key_id;
+	u8     key_length;
+	u8     reserved[2];
+	u8     key_data[HIF_API_WEP_KEY_DATA_SIZE];
 } __packed;
 
 struct hif_tkip_pairwise_key {
-	u8    peer_address[ETH_ALEN];
-	u8    reserved[2];
-	u8    tkip_key_data[HIF_API_TKIP_KEY_DATA_SIZE];
-	u8    rx_mic_key[HIF_API_RX_MIC_KEY_SIZE];
-	u8    tx_mic_key[HIF_API_TX_MIC_KEY_SIZE];
+	u8     peer_address[ETH_ALEN];
+	u8     reserved[2];
+	u8     tkip_key_data[HIF_API_TKIP_KEY_DATA_SIZE];
+	u8     rx_mic_key[HIF_API_RX_MIC_KEY_SIZE];
+	u8     tx_mic_key[HIF_API_TX_MIC_KEY_SIZE];
 } __packed;
 
 struct hif_tkip_group_key {
-	u8    tkip_key_data[HIF_API_TKIP_KEY_DATA_SIZE];
-	u8    rx_mic_key[HIF_API_RX_MIC_KEY_SIZE];
-	u8    key_id;
-	u8    reserved[3];
-	u8    rx_sequence_counter[HIF_API_RX_SEQUENCE_COUNTER_SIZE];
+	u8     tkip_key_data[HIF_API_TKIP_KEY_DATA_SIZE];
+	u8     rx_mic_key[HIF_API_RX_MIC_KEY_SIZE];
+	u8     key_id;
+	u8     reserved[3];
+	u8     rx_sequence_counter[HIF_API_RX_SEQUENCE_COUNTER_SIZE];
 } __packed;
 
 struct hif_aes_pairwise_key {
-	u8    peer_address[ETH_ALEN];
-	u8    reserved[2];
-	u8    aes_key_data[HIF_API_AES_KEY_DATA_SIZE];
+	u8     peer_address[ETH_ALEN];
+	u8     reserved[2];
+	u8     aes_key_data[HIF_API_AES_KEY_DATA_SIZE];
 } __packed;
 
 struct hif_aes_group_key {
-	u8    aes_key_data[HIF_API_AES_KEY_DATA_SIZE];
-	u8    key_id;
-	u8    reserved[3];
-	u8    rx_sequence_counter[HIF_API_RX_SEQUENCE_COUNTER_SIZE];
+	u8     aes_key_data[HIF_API_AES_KEY_DATA_SIZE];
+	u8     key_id;
+	u8     reserved[3];
+	u8     rx_sequence_counter[HIF_API_RX_SEQUENCE_COUNTER_SIZE];
 } __packed;
 
 struct hif_wapi_pairwise_key {
-	u8    peer_address[ETH_ALEN];
-	u8    key_id;
-	u8    reserved;
-	u8    wapi_key_data[HIF_API_WAPI_KEY_DATA_SIZE];
-	u8    mic_key_data[HIF_API_MIC_KEY_DATA_SIZE];
+	u8     peer_address[ETH_ALEN];
+	u8     key_id;
+	u8     reserved;
+	u8     wapi_key_data[HIF_API_WAPI_KEY_DATA_SIZE];
+	u8     mic_key_data[HIF_API_MIC_KEY_DATA_SIZE];
 } __packed;
 
 struct hif_wapi_group_key {
-	u8    wapi_key_data[HIF_API_WAPI_KEY_DATA_SIZE];
-	u8    mic_key_data[HIF_API_MIC_KEY_DATA_SIZE];
-	u8    key_id;
-	u8    reserved[3];
+	u8     wapi_key_data[HIF_API_WAPI_KEY_DATA_SIZE];
+	u8     mic_key_data[HIF_API_MIC_KEY_DATA_SIZE];
+	u8     key_id;
+	u8     reserved[3];
 } __packed;
 
 struct hif_igtk_group_key {
-	u8    igtk_key_data[HIF_API_IGTK_KEY_DATA_SIZE];
-	u8    key_id;
-	u8    reserved[3];
-	u8    ipn[HIF_API_IPN_SIZE];
+	u8     igtk_key_data[HIF_API_IGTK_KEY_DATA_SIZE];
+	u8     key_id;
+	u8     reserved[3];
+	u8     ipn[HIF_API_IPN_SIZE];
 } __packed;
 
 union hif_privacy_key_data {
-	struct hif_wep_pairwise_key                       wep_pairwise_key;
-	struct hif_wep_group_key                          wep_group_key;
-	struct hif_tkip_pairwise_key                      tkip_pairwise_key;
-	struct hif_tkip_group_key                         tkip_group_key;
-	struct hif_aes_pairwise_key                       aes_pairwise_key;
-	struct hif_aes_group_key                          aes_group_key;
-	struct hif_wapi_pairwise_key                      wapi_pairwise_key;
-	struct hif_wapi_group_key                         wapi_group_key;
-	struct hif_igtk_group_key                         igtk_group_key;
+	struct hif_wep_pairwise_key  wep_pairwise_key;
+	struct hif_wep_group_key     wep_group_key;
+	struct hif_tkip_pairwise_key tkip_pairwise_key;
+	struct hif_tkip_group_key    tkip_group_key;
+	struct hif_aes_pairwise_key  aes_pairwise_key;
+	struct hif_aes_group_key     aes_group_key;
+	struct hif_wapi_pairwise_key wapi_pairwise_key;
+	struct hif_wapi_group_key    wapi_group_key;
+	struct hif_igtk_group_key    igtk_group_key;
 };
 
 struct hif_req_add_key {
-	u8    type;
-	u8    entry_index;
-	u8    int_id:2;
-	u8    reserved1:6;
-	u8    reserved2;
+	u8     type;
+	u8     entry_index;
+	u8     int_id:2;
+	u8     reserved1:6;
+	u8     reserved2;
 	union hif_privacy_key_data key;
 } __packed;
 
 struct hif_cnf_add_key {
-	u32   status;
+	__le32 status;
 } __packed;
 
 struct hif_req_remove_key {
-	u8    entry_index;
-	u8    reserved[3];
+	u8     entry_index;
+	u8     reserved[3];
 } __packed;
 
 struct hif_cnf_remove_key {
-	u32   status;
+	__le32 status;
 } __packed;
 
 enum hif_event_ind {
@@ -656,13 +641,13 @@ enum hif_ps_mode_error {
 };
 
 union hif_event_data {
-	u8    rcpi_rssi;
-	u32   ps_mode_error;
-	u32   peer_sta_set;
+	u8     rcpi_rssi;
+	__le32 ps_mode_error;
+	__le32 peer_sta_set;
 };
 
 struct hif_ind_event {
-	u32   event_id;
+	__le32 event_id;
 	union hif_event_data event_data;
 } __packed;
 
diff --git a/drivers/staging/wfx/hif_api_general.h b/drivers/staging/wfx/hif_api_general.h
index a069c3a21b4d..f0135d27120c 100644
--- a/drivers/staging/wfx/hif_api_general.h
+++ b/drivers/staging/wfx/hif_api_general.h
@@ -17,13 +17,13 @@
 #define __packed __attribute__((__packed__))
 #endif
 
-#define API_SSID_SIZE                       32
+#define API_SSID_SIZE             32
 
-#define HIF_ID_IS_INDICATION               0x80
-#define HIF_COUNTER_MAX                    7
+#define HIF_ID_IS_INDICATION      0x80
+#define HIF_COUNTER_MAX           7
 
 struct hif_msg {
-	u16    len;
+	__le16 len;
 	u8     id;
 	u8     reserved:1;
 	u8     interface:2;
@@ -33,38 +33,38 @@ struct hif_msg {
 } __packed;
 
 enum hif_general_requests_ids {
-	HIF_REQ_ID_CONFIGURATION                         = 0x09,
-	HIF_REQ_ID_CONTROL_GPIO                          = 0x26,
-	HIF_REQ_ID_SET_SL_MAC_KEY                        = 0x27,
-	HIF_REQ_ID_SL_EXCHANGE_PUB_KEYS                  = 0x28,
-	HIF_REQ_ID_SL_CONFIGURE                          = 0x29,
-	HIF_REQ_ID_PREVENT_ROLLBACK                      = 0x2a,
-	HIF_REQ_ID_PTA_SETTINGS                          = 0x2b,
-	HIF_REQ_ID_PTA_PRIORITY                          = 0x2c,
-	HIF_REQ_ID_PTA_STATE                             = 0x2d,
-	HIF_REQ_ID_SHUT_DOWN                             = 0x32,
+	HIF_REQ_ID_CONFIGURATION        = 0x09,
+	HIF_REQ_ID_CONTROL_GPIO         = 0x26,
+	HIF_REQ_ID_SET_SL_MAC_KEY       = 0x27,
+	HIF_REQ_ID_SL_EXCHANGE_PUB_KEYS = 0x28,
+	HIF_REQ_ID_SL_CONFIGURE         = 0x29,
+	HIF_REQ_ID_PREVENT_ROLLBACK     = 0x2a,
+	HIF_REQ_ID_PTA_SETTINGS         = 0x2b,
+	HIF_REQ_ID_PTA_PRIORITY         = 0x2c,
+	HIF_REQ_ID_PTA_STATE            = 0x2d,
+	HIF_REQ_ID_SHUT_DOWN            = 0x32,
 };
 
 enum hif_general_confirmations_ids {
-	HIF_CNF_ID_CONFIGURATION                         = 0x09,
-	HIF_CNF_ID_CONTROL_GPIO                          = 0x26,
-	HIF_CNF_ID_SET_SL_MAC_KEY                        = 0x27,
-	HIF_CNF_ID_SL_EXCHANGE_PUB_KEYS                  = 0x28,
-	HIF_CNF_ID_SL_CONFIGURE                          = 0x29,
-	HIF_CNF_ID_PREVENT_ROLLBACK                      = 0x2a,
-	HIF_CNF_ID_PTA_SETTINGS                          = 0x2b,
-	HIF_CNF_ID_PTA_PRIORITY                          = 0x2c,
-	HIF_CNF_ID_PTA_STATE                             = 0x2d,
-	HIF_CNF_ID_SHUT_DOWN                             = 0x32,
+	HIF_CNF_ID_CONFIGURATION        = 0x09,
+	HIF_CNF_ID_CONTROL_GPIO         = 0x26,
+	HIF_CNF_ID_SET_SL_MAC_KEY       = 0x27,
+	HIF_CNF_ID_SL_EXCHANGE_PUB_KEYS = 0x28,
+	HIF_CNF_ID_SL_CONFIGURE         = 0x29,
+	HIF_CNF_ID_PREVENT_ROLLBACK     = 0x2a,
+	HIF_CNF_ID_PTA_SETTINGS         = 0x2b,
+	HIF_CNF_ID_PTA_PRIORITY         = 0x2c,
+	HIF_CNF_ID_PTA_STATE            = 0x2d,
+	HIF_CNF_ID_SHUT_DOWN            = 0x32,
 };
 
 enum hif_general_indications_ids {
-	HIF_IND_ID_EXCEPTION                             = 0xe0,
-	HIF_IND_ID_STARTUP                               = 0xe1,
-	HIF_IND_ID_WAKEUP                                = 0xe2,
-	HIF_IND_ID_GENERIC                               = 0xe3,
-	HIF_IND_ID_ERROR                                 = 0xe4,
-	HIF_IND_ID_SL_EXCHANGE_PUB_KEYS                  = 0xe5
+	HIF_IND_ID_EXCEPTION            = 0xe0,
+	HIF_IND_ID_STARTUP              = 0xe1,
+	HIF_IND_ID_WAKEUP               = 0xe2,
+	HIF_IND_ID_GENERIC              = 0xe3,
+	HIF_IND_ID_ERROR                = 0xe4,
+	HIF_IND_ID_SL_EXCHANGE_PUB_KEYS = 0xe5
 };
 
 enum hif_hi_status {
@@ -84,188 +84,180 @@ enum hif_hi_status {
 };
 
 enum hif_api_rate_index {
-	API_RATE_INDEX_B_1MBPS                   = 0,
-	API_RATE_INDEX_B_2MBPS                   = 1,
-	API_RATE_INDEX_B_5P5MBPS                 = 2,
-	API_RATE_INDEX_B_11MBPS                  = 3,
-	API_RATE_INDEX_PBCC_22MBPS               = 4,
-	API_RATE_INDEX_PBCC_33MBPS               = 5,
-	API_RATE_INDEX_G_6MBPS                   = 6,
-	API_RATE_INDEX_G_9MBPS                   = 7,
-	API_RATE_INDEX_G_12MBPS                  = 8,
-	API_RATE_INDEX_G_18MBPS                  = 9,
-	API_RATE_INDEX_G_24MBPS                  = 10,
-	API_RATE_INDEX_G_36MBPS                  = 11,
-	API_RATE_INDEX_G_48MBPS                  = 12,
-	API_RATE_INDEX_G_54MBPS                  = 13,
-	API_RATE_INDEX_N_6P5MBPS                 = 14,
-	API_RATE_INDEX_N_13MBPS                  = 15,
-	API_RATE_INDEX_N_19P5MBPS                = 16,
-	API_RATE_INDEX_N_26MBPS                  = 17,
-	API_RATE_INDEX_N_39MBPS                  = 18,
-	API_RATE_INDEX_N_52MBPS                  = 19,
-	API_RATE_INDEX_N_58P5MBPS                = 20,
-	API_RATE_INDEX_N_65MBPS                  = 21,
-	API_RATE_NUM_ENTRIES                     = 22
+	API_RATE_INDEX_B_1MBPS     = 0,
+	API_RATE_INDEX_B_2MBPS     = 1,
+	API_RATE_INDEX_B_5P5MBPS   = 2,
+	API_RATE_INDEX_B_11MBPS    = 3,
+	API_RATE_INDEX_PBCC_22MBPS = 4,
+	API_RATE_INDEX_PBCC_33MBPS = 5,
+	API_RATE_INDEX_G_6MBPS     = 6,
+	API_RATE_INDEX_G_9MBPS     = 7,
+	API_RATE_INDEX_G_12MBPS    = 8,
+	API_RATE_INDEX_G_18MBPS    = 9,
+	API_RATE_INDEX_G_24MBPS    = 10,
+	API_RATE_INDEX_G_36MBPS    = 11,
+	API_RATE_INDEX_G_48MBPS    = 12,
+	API_RATE_INDEX_G_54MBPS    = 13,
+	API_RATE_INDEX_N_6P5MBPS   = 14,
+	API_RATE_INDEX_N_13MBPS    = 15,
+	API_RATE_INDEX_N_19P5MBPS  = 16,
+	API_RATE_INDEX_N_26MBPS    = 17,
+	API_RATE_INDEX_N_39MBPS    = 18,
+	API_RATE_INDEX_N_52MBPS    = 19,
+	API_RATE_INDEX_N_58P5MBPS  = 20,
+	API_RATE_INDEX_N_65MBPS    = 21,
+	API_RATE_NUM_ENTRIES       = 22
 };
 
 
 enum hif_fw_type {
-	HIF_FW_TYPE_ETF                             = 0x0,
-	HIF_FW_TYPE_WFM                             = 0x1,
-	HIF_FW_TYPE_WSM                             = 0x2
+	HIF_FW_TYPE_ETF  = 0x0,
+	HIF_FW_TYPE_WFM  = 0x1,
+	HIF_FW_TYPE_WSM  = 0x2
 };
 
 struct hif_capabilities {
-	u8    link_mode:2;
-	u8    reserved1:6;
-	u8    reserved2;
-	u8    reserved3;
-	u8    reserved4;
+	u8     link_mode:2;
+	u8     reserved1:6;
+	u8     reserved2;
+	u8     reserved3;
+	u8     reserved4;
 } __packed;
 
 struct hif_otp_regul_sel_mode_info {
-	u8    region_sel_mode:4;
-	u8    reserved:4;
+	u8     region_sel_mode:4;
+	u8     reserved:4;
 } __packed;
 
 struct hif_otp_phy_info {
-	u8    phy1_region:3;
-	u8    phy0_region:3;
-	u8    otp_phy_ver:2;
+	u8     phy1_region:3;
+	u8     phy0_region:3;
+	u8     otp_phy_ver:2;
 } __packed;
 
-#define API_OPN_SIZE                                    14
-#define API_UID_SIZE                                    8
-#define API_DISABLED_CHANNEL_LIST_SIZE                  2
-#define API_FIRMWARE_LABEL_SIZE                         128
-
 struct hif_ind_startup {
-	u32   status;
-	u16   hardware_id;
-	u8    opn[API_OPN_SIZE];
-	u8    uid[API_UID_SIZE];
-	u16   num_inp_ch_bufs;
-	u16   size_inp_ch_buf;
-	u8    num_links_ap;
-	u8    num_interfaces;
-	u8    mac_addr[2][ETH_ALEN];
-	u8    api_version_minor;
-	u8    api_version_major;
+	__le32 status;
+	__le16 hardware_id;
+	u8     opn[14];
+	u8     uid[8];
+	__le16 num_inp_ch_bufs;
+	__le16 size_inp_ch_buf;
+	u8     num_links_ap;
+	u8     num_interfaces;
+	u8     mac_addr[2][ETH_ALEN];
+	u8     api_version_minor;
+	u8     api_version_major;
 	struct hif_capabilities capabilities;
-	u8    firmware_build;
-	u8    firmware_minor;
-	u8    firmware_major;
-	u8    firmware_type;
-	u8    disabled_channel_list[API_DISABLED_CHANNEL_LIST_SIZE];
+	u8     firmware_build;
+	u8     firmware_minor;
+	u8     firmware_major;
+	u8     firmware_type;
+	u8     disabled_channel_list[2];
 	struct hif_otp_regul_sel_mode_info regul_sel_mode_info;
 	struct hif_otp_phy_info otp_phy_info;
-	u32   supported_rate_mask;
-	u8    firmware_label[API_FIRMWARE_LABEL_SIZE];
+	__le32 supported_rate_mask;
+	u8     firmware_label[128];
 } __packed;
 
 struct hif_ind_wakeup {
 } __packed;
 
 struct hif_req_configuration {
-	u16   length;
-	u8    pds_data[];
+	__le16 length;
+	u8     pds_data[];
 } __packed;
 
 struct hif_cnf_configuration {
-	u32   status;
+	__le32 status;
 } __packed;
 
 enum hif_gpio_mode {
-	HIF_GPIO_MODE_D0                            = 0x0,
-	HIF_GPIO_MODE_D1                            = 0x1,
-	HIF_GPIO_MODE_OD0                           = 0x2,
-	HIF_GPIO_MODE_OD1                           = 0x3,
-	HIF_GPIO_MODE_TRISTATE                      = 0x4,
-	HIF_GPIO_MODE_TOGGLE                        = 0x5,
-	HIF_GPIO_MODE_READ                          = 0x6
+	HIF_GPIO_MODE_D0       = 0x0,
+	HIF_GPIO_MODE_D1       = 0x1,
+	HIF_GPIO_MODE_OD0      = 0x2,
+	HIF_GPIO_MODE_OD1      = 0x3,
+	HIF_GPIO_MODE_TRISTATE = 0x4,
+	HIF_GPIO_MODE_TOGGLE   = 0x5,
+	HIF_GPIO_MODE_READ     = 0x6
 };
 
 struct hif_req_control_gpio {
-	u8 gpio_label;
-	u8 gpio_mode;
+	u8     gpio_label;
+	u8     gpio_mode;
 } __packed;
 
-enum hif_gpio_error {
-	HIF_GPIO_ERROR_0                            = 0x0,
-	HIF_GPIO_ERROR_1                            = 0x1,
-	HIF_GPIO_ERROR_2                            = 0x2
-};
-
 struct hif_cnf_control_gpio {
-	u32 status;
-	u32 value;
+	__le32 status;
+	__le32 value;
 } __packed;
 
 enum hif_generic_indication_type {
-	HIF_GENERIC_INDICATION_TYPE_RAW               = 0x0,
-	HIF_GENERIC_INDICATION_TYPE_STRING            = 0x1,
-	HIF_GENERIC_INDICATION_TYPE_RX_STATS          = 0x2
+	HIF_GENERIC_INDICATION_TYPE_RAW      = 0x0,
+	HIF_GENERIC_INDICATION_TYPE_STRING   = 0x1,
+	HIF_GENERIC_INDICATION_TYPE_RX_STATS = 0x2
 };
 
 struct hif_rx_stats {
-	u32   nb_rx_frame;
-	u32   nb_crc_frame;
-	u32   per_total;
-	u32   throughput;
-	u32   nb_rx_by_rate[API_RATE_NUM_ENTRIES];
-	u16   per[API_RATE_NUM_ENTRIES];
-	s16    snr[API_RATE_NUM_ENTRIES];
-	s16    rssi[API_RATE_NUM_ENTRIES];
-	s16    cfo[API_RATE_NUM_ENTRIES];
-	u32   date;
-	u32   pwr_clk_freq;
-	u8    is_ext_pwr_clk;
+	__le32 nb_rx_frame;
+	__le32 nb_crc_frame;
+	__le32 per_total;
+	__le32 throughput;
+	__le32 nb_rx_by_rate[API_RATE_NUM_ENTRIES];
+	__le16 per[API_RATE_NUM_ENTRIES];
+	__le16 snr[API_RATE_NUM_ENTRIES];  // signed value
+	__le16 rssi[API_RATE_NUM_ENTRIES]; // signed value
+	__le16 cfo[API_RATE_NUM_ENTRIES];  // signed value
+	__le32 date;
+	__le32 pwr_clk_freq;
+	u8     is_ext_pwr_clk;
 	s8     current_temp;
 } __packed;
 
 union hif_indication_data {
-	struct hif_rx_stats                                   rx_stats;
-	u8                                       raw_data[1];
+	struct hif_rx_stats rx_stats;
+	u8     raw_data[1];
 };
 
 struct hif_ind_generic {
-	u32 indication_type;
+	__le32 indication_type;
 	union hif_indication_data indication_data;
 } __packed;
 
-
-#define HIF_EXCEPTION_DATA_SIZE            124
-
-struct hif_ind_exception {
-	u8    data[HIF_EXCEPTION_DATA_SIZE];
-} __packed;
-
-
 enum hif_error {
-	HIF_ERROR_FIRMWARE_ROLLBACK             = 0x0,
-	HIF_ERROR_FIRMWARE_DEBUG_ENABLED        = 0x1,
-	HIF_ERROR_OUTDATED_SESSION_KEY          = 0x2,
-	HIF_ERROR_INVALID_SESSION_KEY           = 0x3,
-	HIF_ERROR_OOR_VOLTAGE                   = 0x4,
-	HIF_ERROR_PDS_VERSION                   = 0x5,
-	HIF_ERROR_OOR_TEMPERATURE               = 0x6,
-	HIF_ERROR_REQ_DURING_KEY_EXCHANGE       = 0x7,
-	HIF_ERROR_MULTI_TX_CNF_SECURELINK       = 0x8,
-	HIF_ERROR_SECURELINK_OVERFLOW           = 0x9,
-	HIF_ERROR_SECURELINK_DECRYPTION         = 0xa
+	HIF_ERROR_FIRMWARE_ROLLBACK           = 0x00,
+	HIF_ERROR_FIRMWARE_DEBUG_ENABLED      = 0x01,
+	HIF_ERROR_SLK_OUTDATED_SESSION_KEY    = 0x02,
+	HIF_ERROR_SLK_SESSION_KEY             = 0x03,
+	HIF_ERROR_OOR_VOLTAGE                 = 0x04,
+	HIF_ERROR_PDS_PAYLOAD                 = 0x05,
+	HIF_ERROR_OOR_TEMPERATURE             = 0x06,
+	HIF_ERROR_SLK_REQ_DURING_KEY_EXCHANGE = 0x07,
+	HIF_ERROR_SLK_MULTI_TX_UNSUPPORTED    = 0x08,
+	HIF_ERROR_SLK_OVERFLOW                = 0x09,
+	HIF_ERROR_SLK_DECRYPTION              = 0x0a,
+	HIF_ERROR_SLK_WRONG_ENCRYPTION_STATE  = 0x0b,
+	HIF_ERROR_HIF_BUS_FREQUENCY_TOO_LOW   = 0x0c,
+	HIF_ERROR_HIF_RX_DATA_TOO_LARGE       = 0x0e,
+	HIF_ERROR_HIF_TX_QUEUE_FULL           = 0x0d,
+	HIF_ERROR_HIF_BUS                     = 0x0f,
+	HIF_ERROR_PDS_TESTFEATURE             = 0x10,
 };
 
 struct hif_ind_error {
-	u32   type;
-	u8    data[];
+	__le32 type;
+	u8     data[];
+} __packed;
+
+struct hif_ind_exception {
+	__le32 type;
+	u8     data[];
 } __packed;
 
 enum hif_secure_link_state {
-	SEC_LINK_UNAVAILABLE                    = 0x0,
-	SEC_LINK_RESERVED                       = 0x1,
-	SEC_LINK_EVAL                           = 0x2,
-	SEC_LINK_ENFORCED                       = 0x3
+	SEC_LINK_UNAVAILABLE = 0x0,
+	SEC_LINK_RESERVED    = 0x1,
+	SEC_LINK_EVAL        = 0x2,
+	SEC_LINK_ENFORCED    = 0x3
 };
 
 enum hif_sl_encryption_type {
@@ -282,156 +274,70 @@ struct hif_sl_msg_hdr {
 
 struct hif_sl_msg {
 	struct hif_sl_msg_hdr hdr;
-	u16        len;
-	u8         payload[];
+	__le16 len;
+	u8     payload[];
 } __packed;
 
-#define AES_CCM_TAG_SIZE     16
+#define AES_CCM_TAG_SIZE          16
 
 struct hif_sl_tag {
-	u8 tag[16];
+	u8     tag[16];
 } __packed;
 
 enum hif_sl_mac_key_dest {
-	SL_MAC_KEY_DEST_OTP                        = 0x78,
-	SL_MAC_KEY_DEST_RAM                        = 0x87
+	SL_MAC_KEY_DEST_OTP = 0x78,
+	SL_MAC_KEY_DEST_RAM = 0x87
 };
 
-#define API_KEY_VALUE_SIZE      32
+#define API_KEY_VALUE_SIZE        32
 
 struct hif_req_set_sl_mac_key {
-	u8    otp_or_ram;
-	u8    key_value[API_KEY_VALUE_SIZE];
+	u8     otp_or_ram;
+	u8     key_value[API_KEY_VALUE_SIZE];
 } __packed;
 
 struct hif_cnf_set_sl_mac_key {
-	u32   status;
+	__le32 status;
 } __packed;
 
-#define API_HOST_PUB_KEY_SIZE                           32
-#define API_HOST_PUB_KEY_MAC_SIZE                       64
-
 enum hif_sl_session_key_alg {
-	HIF_SL_CURVE25519                                = 0x01,
-	HIF_SL_KDF                                       = 0x02
+	HIF_SL_CURVE25519 = 0x01,
+	HIF_SL_KDF        = 0x02
 };
 
+#define API_HOST_PUB_KEY_SIZE     32
+#define API_HOST_PUB_KEY_MAC_SIZE 64
+
 struct hif_req_sl_exchange_pub_keys {
-	u8    algorithm:2;
-	u8    reserved1:6;
-	u8    reserved2[3];
-	u8    host_pub_key[API_HOST_PUB_KEY_SIZE];
-	u8    host_pub_key_mac[API_HOST_PUB_KEY_MAC_SIZE];
+	u8     algorithm:2;
+	u8     reserved1:6;
+	u8     reserved2[3];
+	u8     host_pub_key[API_HOST_PUB_KEY_SIZE];
+	u8     host_pub_key_mac[API_HOST_PUB_KEY_MAC_SIZE];
 } __packed;
 
 struct hif_cnf_sl_exchange_pub_keys {
-	u32   status;
+	__le32 status;
 } __packed;
 
-#define API_NCP_PUB_KEY_SIZE                            32
-#define API_NCP_PUB_KEY_MAC_SIZE                        64
+#define API_NCP_PUB_KEY_SIZE      32
+#define API_NCP_PUB_KEY_MAC_SIZE  64
 
 struct hif_ind_sl_exchange_pub_keys {
-	u32   status;
-	u8    ncp_pub_key[API_NCP_PUB_KEY_SIZE];
-	u8    ncp_pub_key_mac[API_NCP_PUB_KEY_MAC_SIZE];
+	__le32 status;
+	u8     ncp_pub_key[API_NCP_PUB_KEY_SIZE];
+	u8     ncp_pub_key_mac[API_NCP_PUB_KEY_MAC_SIZE];
 } __packed;
 
-#define API_ENCR_BMP_SIZE        32
-
 struct hif_req_sl_configure {
-	u8    encr_bmp[API_ENCR_BMP_SIZE];
-	u8    disable_session_key_protection:1;
-	u8    reserved1:7;
-	u8    reserved2[3];
+	u8     encr_bmp[32];
+	u8     disable_session_key_protection:1;
+	u8     reserved1:7;
+	u8     reserved2[3];
 } __packed;
 
 struct hif_cnf_sl_configure {
-	u32 status;
-} __packed;
-
-struct hif_req_prevent_rollback {
-	u32   magic_word;
-} __packed;
-
-struct hif_cnf_prevent_rollback {
-	u32    status;
-} __packed;
-
-enum hif_pta_mode {
-	PTA_1W_WLAN_MASTER = 0,
-	PTA_1W_COEX_MASTER = 1,
-	PTA_2W             = 2,
-	PTA_3W             = 3,
-	PTA_4W             = 4
-};
-
-enum hif_signal_level {
-	SIGNAL_LOW  = 0,
-	SIGNAL_HIGH = 1
-};
-
-enum hif_coex_type {
-	COEX_TYPE_GENERIC = 0,
-	COEX_TYPE_BLE     = 1
-};
-
-enum hif_grant_state {
-	NO_GRANT = 0,
-	GRANT    = 1
-};
-
-struct hif_req_pta_settings {
-	u8 pta_mode;
-	u8 request_signal_active_level;
-	u8 priority_signal_active_level;
-	u8 freq_signal_active_level;
-	u8 grant_signal_active_level;
-	u8 coex_type;
-	u8 default_grant_state;
-	u8 simultaneous_rx_accesses;
-	u8 priority_sampling_time;
-	u8 tx_rx_sampling_time;
-	u8 freq_sampling_time;
-	u8 grant_valid_time;
-	u8 fem_control_time;
-	u8 first_slot_time;
-	u16 periodic_tx_rx_sampling_time;
-	u16 coex_quota;
-	u16 wlan_quota;
-} __packed;
-
-struct hif_cnf_pta_settings {
-	u32 status;
-} __packed;
-
-enum hif_pta_priority {
-	HIF_PTA_PRIORITY_COEX_MAXIMIZED = 0x00000562,
-	HIF_PTA_PRIORITY_COEX_HIGH      = 0x00000462,
-	HIF_PTA_PRIORITY_BALANCED       = 0x00001461,
-	HIF_PTA_PRIORITY_WLAN_HIGH      = 0x00001851,
-	HIF_PTA_PRIORITY_WLAN_MAXIMIZED = 0x00001A51
-};
-
-struct hif_req_pta_priority {
-	u32 priority;
-} __packed;
-
-struct hif_cnf_pta_priority {
-	u32 status;
-} __packed;
-
-enum hif_pta_state {
-	PTA_OFF = 0,
-	PTA_ON  = 1
-};
-
-struct hif_req_pta_state {
-	u32 pta_state;
-} __packed;
-
-struct hif_cnf_pta_state {
-	u32 status;
+	__le32 status;
 } __packed;
 
 #endif
diff --git a/drivers/staging/wfx/hif_api_mib.h b/drivers/staging/wfx/hif_api_mib.h
index 0c67cd4c1593..6f1434795fa8 100644
--- a/drivers/staging/wfx/hif_api_mib.h
+++ b/drivers/staging/wfx/hif_api_mib.h
@@ -10,175 +10,88 @@
 
 #include "hif_api_general.h"
 
-#define HIF_API_IPV4_ADDRESS_SIZE                       4
-#define HIF_API_IPV6_ADDRESS_SIZE                       16
+#define HIF_API_IPV4_ADDRESS_SIZE 4
+#define HIF_API_IPV6_ADDRESS_SIZE 16
 
 enum hif_mib_ids {
-	HIF_MIB_ID_GL_OPERATIONAL_POWER_MODE       = 0x2000,
-	HIF_MIB_ID_GL_BLOCK_ACK_INFO               = 0x2001,
-	HIF_MIB_ID_GL_SET_MULTI_MSG                = 0x2002,
-	HIF_MIB_ID_CCA_CONFIG                      = 0x2003,
-	HIF_MIB_ID_ETHERTYPE_DATAFRAME_CONDITION   = 0x2010,
-	HIF_MIB_ID_PORT_DATAFRAME_CONDITION        = 0x2011,
-	HIF_MIB_ID_MAGIC_DATAFRAME_CONDITION       = 0x2012,
-	HIF_MIB_ID_MAC_ADDR_DATAFRAME_CONDITION    = 0x2013,
-	HIF_MIB_ID_IPV4_ADDR_DATAFRAME_CONDITION   = 0x2014,
-	HIF_MIB_ID_IPV6_ADDR_DATAFRAME_CONDITION   = 0x2015,
-	HIF_MIB_ID_UC_MC_BC_DATAFRAME_CONDITION    = 0x2016,
-	HIF_MIB_ID_CONFIG_DATA_FILTER              = 0x2017,
-	HIF_MIB_ID_SET_DATA_FILTERING              = 0x2018,
-	HIF_MIB_ID_ARP_IP_ADDRESSES_TABLE          = 0x2019,
-	HIF_MIB_ID_NS_IP_ADDRESSES_TABLE           = 0x201A,
-	HIF_MIB_ID_RX_FILTER                       = 0x201B,
-	HIF_MIB_ID_BEACON_FILTER_TABLE             = 0x201C,
-	HIF_MIB_ID_BEACON_FILTER_ENABLE            = 0x201D,
-	HIF_MIB_ID_GRP_SEQ_COUNTER                 = 0x2030,
-	HIF_MIB_ID_TSF_COUNTER                     = 0x2031,
-	HIF_MIB_ID_STATISTICS_TABLE                = 0x2032,
-	HIF_MIB_ID_COUNTERS_TABLE                  = 0x2033,
-	HIF_MIB_ID_MAX_TX_POWER_LEVEL              = 0x2034,
-	HIF_MIB_ID_EXTENDED_COUNTERS_TABLE         = 0x2035,
-	HIF_MIB_ID_DOT11_MAC_ADDRESS               = 0x2040,
+	HIF_MIB_ID_GL_OPERATIONAL_POWER_MODE        = 0x2000,
+	HIF_MIB_ID_GL_BLOCK_ACK_INFO                = 0x2001,
+	HIF_MIB_ID_GL_SET_MULTI_MSG                 = 0x2002,
+	HIF_MIB_ID_CCA_CONFIG                       = 0x2003,
+	HIF_MIB_ID_ETHERTYPE_DATAFRAME_CONDITION    = 0x2010,
+	HIF_MIB_ID_PORT_DATAFRAME_CONDITION         = 0x2011,
+	HIF_MIB_ID_MAGIC_DATAFRAME_CONDITION        = 0x2012,
+	HIF_MIB_ID_MAC_ADDR_DATAFRAME_CONDITION     = 0x2013,
+	HIF_MIB_ID_IPV4_ADDR_DATAFRAME_CONDITION    = 0x2014,
+	HIF_MIB_ID_IPV6_ADDR_DATAFRAME_CONDITION    = 0x2015,
+	HIF_MIB_ID_UC_MC_BC_DATAFRAME_CONDITION     = 0x2016,
+	HIF_MIB_ID_CONFIG_DATA_FILTER               = 0x2017,
+	HIF_MIB_ID_SET_DATA_FILTERING               = 0x2018,
+	HIF_MIB_ID_ARP_IP_ADDRESSES_TABLE           = 0x2019,
+	HIF_MIB_ID_NS_IP_ADDRESSES_TABLE            = 0x201A,
+	HIF_MIB_ID_RX_FILTER                        = 0x201B,
+	HIF_MIB_ID_BEACON_FILTER_TABLE              = 0x201C,
+	HIF_MIB_ID_BEACON_FILTER_ENABLE             = 0x201D,
+	HIF_MIB_ID_GRP_SEQ_COUNTER                  = 0x2030,
+	HIF_MIB_ID_TSF_COUNTER                      = 0x2031,
+	HIF_MIB_ID_STATISTICS_TABLE                 = 0x2032,
+	HIF_MIB_ID_COUNTERS_TABLE                   = 0x2033,
+	HIF_MIB_ID_MAX_TX_POWER_LEVEL               = 0x2034,
+	HIF_MIB_ID_EXTENDED_COUNTERS_TABLE          = 0x2035,
+	HIF_MIB_ID_DOT11_MAC_ADDRESS                = 0x2040,
 	HIF_MIB_ID_DOT11_MAX_TRANSMIT_MSDU_LIFETIME = 0x2041,
-	HIF_MIB_ID_DOT11_MAX_RECEIVE_LIFETIME      = 0x2042,
-	HIF_MIB_ID_DOT11_WEP_DEFAULT_KEY_ID        = 0x2043,
-	HIF_MIB_ID_DOT11_RTS_THRESHOLD             = 0x2044,
-	HIF_MIB_ID_SLOT_TIME                       = 0x2045,
-	HIF_MIB_ID_CURRENT_TX_POWER_LEVEL          = 0x2046,
-	HIF_MIB_ID_NON_ERP_PROTECTION              = 0x2047,
-	HIF_MIB_ID_TEMPLATE_FRAME                  = 0x2048,
-	HIF_MIB_ID_BEACON_WAKEUP_PERIOD            = 0x2049,
-	HIF_MIB_ID_RCPI_RSSI_THRESHOLD             = 0x204A,
-	HIF_MIB_ID_BLOCK_ACK_POLICY                = 0x204B,
-	HIF_MIB_ID_OVERRIDE_INTERNAL_TX_RATE       = 0x204C,
-	HIF_MIB_ID_SET_ASSOCIATION_MODE            = 0x204D,
-	HIF_MIB_ID_SET_UAPSD_INFORMATION           = 0x204E,
-	HIF_MIB_ID_SET_TX_RATE_RETRY_POLICY        = 0x204F,
-	HIF_MIB_ID_PROTECTED_MGMT_POLICY           = 0x2050,
-	HIF_MIB_ID_SET_HT_PROTECTION               = 0x2051,
-	HIF_MIB_ID_KEEP_ALIVE_PERIOD               = 0x2052,
-	HIF_MIB_ID_ARP_KEEP_ALIVE_PERIOD           = 0x2053,
-	HIF_MIB_ID_INACTIVITY_TIMER                = 0x2054,
-	HIF_MIB_ID_INTERFACE_PROTECTION            = 0x2055,
-	HIF_MIB_ID_BEACON_STATS                    = 0x2056,
+	HIF_MIB_ID_DOT11_MAX_RECEIVE_LIFETIME       = 0x2042,
+	HIF_MIB_ID_DOT11_WEP_DEFAULT_KEY_ID         = 0x2043,
+	HIF_MIB_ID_DOT11_RTS_THRESHOLD              = 0x2044,
+	HIF_MIB_ID_SLOT_TIME                        = 0x2045,
+	HIF_MIB_ID_CURRENT_TX_POWER_LEVEL           = 0x2046,
+	HIF_MIB_ID_NON_ERP_PROTECTION               = 0x2047,
+	HIF_MIB_ID_TEMPLATE_FRAME                   = 0x2048,
+	HIF_MIB_ID_BEACON_WAKEUP_PERIOD             = 0x2049,
+	HIF_MIB_ID_RCPI_RSSI_THRESHOLD              = 0x204A,
+	HIF_MIB_ID_BLOCK_ACK_POLICY                 = 0x204B,
+	HIF_MIB_ID_OVERRIDE_INTERNAL_TX_RATE        = 0x204C,
+	HIF_MIB_ID_SET_ASSOCIATION_MODE             = 0x204D,
+	HIF_MIB_ID_SET_UAPSD_INFORMATION            = 0x204E,
+	HIF_MIB_ID_SET_TX_RATE_RETRY_POLICY         = 0x204F,
+	HIF_MIB_ID_PROTECTED_MGMT_POLICY            = 0x2050,
+	HIF_MIB_ID_SET_HT_PROTECTION                = 0x2051,
+	HIF_MIB_ID_KEEP_ALIVE_PERIOD                = 0x2052,
+	HIF_MIB_ID_ARP_KEEP_ALIVE_PERIOD            = 0x2053,
+	HIF_MIB_ID_INACTIVITY_TIMER                 = 0x2054,
+	HIF_MIB_ID_INTERFACE_PROTECTION             = 0x2055,
+	HIF_MIB_ID_BEACON_STATS                     = 0x2056,
 };
 
-#define HIF_OP_POWER_MODE_MASK                     0xf
-
 enum hif_op_power_mode {
-	HIF_OP_POWER_MODE_ACTIVE                   = 0x0,
-	HIF_OP_POWER_MODE_DOZE                     = 0x1,
-	HIF_OP_POWER_MODE_QUIESCENT                = 0x2
+	HIF_OP_POWER_MODE_ACTIVE    = 0x0,
+	HIF_OP_POWER_MODE_DOZE      = 0x1,
+	HIF_OP_POWER_MODE_QUIESCENT = 0x2
 };
 
 struct hif_mib_gl_operational_power_mode {
-	u8    power_mode:4;
-	u8    reserved1:3;
-	u8    wup_ind_activation:1;
-	u8    reserved2[3];
-} __packed;
-
-struct hif_mib_gl_block_ack_info {
-	u8    rx_buffer_size;
-	u8    rx_max_num_agreements;
-	u8    tx_buffer_size;
-	u8    tx_max_num_agreements;
+	u8     power_mode:4;
+	u8     reserved1:3;
+	u8     wup_ind_activation:1;
+	u8     reserved2[3];
 } __packed;
 
 struct hif_mib_gl_set_multi_msg {
-	u8    enable_multi_tx_conf:1;
-	u8    reserved1:7;
-	u8    reserved2[3];
-} __packed;
-
-enum hif_cca_thr_mode {
-	HIF_CCA_THR_MODE_RELATIVE = 0x0,
-	HIF_CCA_THR_MODE_ABSOLUTE = 0x1
-};
-
-struct hif_mib_gl_cca_config {
-	u8  cca_thr_mode;
-	u8  reserved[3];
-} __packed;
-
-#define MAX_NUMBER_DATA_FILTERS             0xA
-
-#define MAX_NUMBER_IPV4_ADDR_CONDITIONS     0x4
-#define MAX_NUMBER_IPV6_ADDR_CONDITIONS     0x4
-#define MAX_NUMBER_MAC_ADDR_CONDITIONS      0x4
-#define MAX_NUMBER_UC_MC_BC_CONDITIONS      0x4
-#define MAX_NUMBER_ETHER_TYPE_CONDITIONS    0x4
-#define MAX_NUMBER_PORT_CONDITIONS          0x4
-#define MAX_NUMBER_MAGIC_CONDITIONS         0x4
-#define MAX_NUMBER_ARP_CONDITIONS           0x2
-#define MAX_NUMBER_NS_CONDITIONS            0x2
-
-struct hif_mib_ethertype_data_frame_condition {
-	u8    condition_idx;
-	u8    reserved;
-	u16   ether_type;
-} __packed;
-
-enum hif_udp_tcp_protocol {
-	HIF_PROTOCOL_UDP                       = 0x0,
-	HIF_PROTOCOL_TCP                       = 0x1,
-	HIF_PROTOCOL_BOTH_UDP_TCP              = 0x2
-};
-
-enum hif_which_port {
-	HIF_PORT_DST                           = 0x0,
-	HIF_PORT_SRC                           = 0x1,
-	HIF_PORT_SRC_OR_DST                    = 0x2
-};
-
-struct hif_mib_ports_data_frame_condition {
-	u8    condition_idx;
-	u8    protocol;
-	u8    which_port;
-	u8    reserved1;
-	u16   port_number;
-	u8    reserved2[2];
-} __packed;
-
-#define HIF_API_MAGIC_PATTERN_SIZE                 32
-
-struct hif_mib_magic_data_frame_condition {
-	u8    condition_idx;
-	u8    offset;
-	u8    magic_pattern_length;
-	u8    reserved;
-	u8    magic_pattern[HIF_API_MAGIC_PATTERN_SIZE];
+	u8     enable_multi_tx_conf:1;
+	u8     reserved1:7;
+	u8     reserved2[3];
 } __packed;
 
 enum hif_mac_addr_type {
-	HIF_MAC_ADDR_A1                            = 0x0,
-	HIF_MAC_ADDR_A2                            = 0x1,
-	HIF_MAC_ADDR_A3                            = 0x2
+	HIF_MAC_ADDR_A1 = 0x0,
+	HIF_MAC_ADDR_A2 = 0x1,
+	HIF_MAC_ADDR_A3 = 0x2
 };
 
 struct hif_mib_mac_addr_data_frame_condition {
-	u8    condition_idx;
-	u8    address_type;
-	u8    mac_address[ETH_ALEN];
-} __packed;
-
-enum hif_ip_addr_mode {
-	HIF_IP_ADDR_SRC                            = 0x0,
-	HIF_IP_ADDR_DST                            = 0x1
-};
-
-struct hif_mib_ipv4_addr_data_frame_condition {
-	u8    condition_idx;
-	u8    address_mode;
-	u8    reserved[2];
-	u8    i_pv4_address[HIF_API_IPV4_ADDRESS_SIZE];
-} __packed;
-
-struct hif_mib_ipv6_addr_data_frame_condition {
-	u8    condition_idx;
-	u8    address_mode;
-	u8    reserved[2];
-	u8    i_pv6_address[HIF_API_IPV6_ADDRESS_SIZE];
+	u8     condition_idx;
+	u8     address_type;
+	u8     mac_address[ETH_ALEN];
 } __packed;
 
 #define HIF_FILTER_UNICAST   0x1
@@ -186,365 +99,289 @@ struct hif_mib_ipv6_addr_data_frame_condition {
 #define HIF_FILTER_BROADCAST 0x4
 
 struct hif_mib_uc_mc_bc_data_frame_condition {
-	u8    condition_idx;
-	u8    allowed_frames;
-	u8    reserved[2];
+	u8     condition_idx;
+	u8     allowed_frames;
+	u8     reserved[2];
 } __packed;
 
 struct hif_mib_config_data_filter {
-	u8    filter_idx;
-	u8    enable;
-	u8    reserved1[2];
-	u8    eth_type_cond;
-	u8    port_cond;
-	u8    magic_cond;
-	u8    mac_cond;
-	u8    ipv4_cond;
-	u8    ipv6_cond;
-	u8    uc_mc_bc_cond;
-	u8    reserved2;
+	u8     filter_idx;
+	u8     enable;
+	u8     reserved1[2];
+	u8     eth_type_cond;
+	u8     port_cond;
+	u8     magic_cond;
+	u8     mac_cond;
+	u8     ipv4_cond;
+	u8     ipv6_cond;
+	u8     uc_mc_bc_cond;
+	u8     reserved2;
 } __packed;
 
 struct hif_mib_set_data_filtering {
-	u8    invert_matching:1;
-	u8    reserved1:7;
-	u8    enable:1;
-	u8    reserved2:7;
-	u8    reserved3[2];
+	u8     invert_matching:1;
+	u8     reserved1:7;
+	u8     enable:1;
+	u8     reserved2:7;
+	u8     reserved3[2];
 } __packed;
 
 enum hif_arp_ns_frame_treatment {
-	HIF_ARP_NS_FILTERING_DISABLE                  = 0x0,
-	HIF_ARP_NS_FILTERING_ENABLE                   = 0x1,
-	HIF_ARP_NS_REPLY_ENABLE                       = 0x2
+	HIF_ARP_NS_FILTERING_DISABLE = 0x0,
+	HIF_ARP_NS_FILTERING_ENABLE  = 0x1,
+	HIF_ARP_NS_REPLY_ENABLE      = 0x2
 };
 
 struct hif_mib_arp_ip_addr_table {
-	u8    condition_idx;
-	u8    arp_enable;
-	u8    reserved[2];
-	u8    ipv4_address[HIF_API_IPV4_ADDRESS_SIZE];
-} __packed;
-
-struct hif_mib_ns_ip_addr_table {
-	u8    condition_idx;
-	u8    ns_enable;
-	u8    reserved[2];
-	u8    ipv6_address[HIF_API_IPV6_ADDRESS_SIZE];
+	u8     condition_idx;
+	u8     arp_enable;
+	u8     reserved[2];
+	u8     ipv4_address[HIF_API_IPV4_ADDRESS_SIZE];
 } __packed;
 
 struct hif_mib_rx_filter {
-	u8    reserved1:1;
-	u8    bssid_filter:1;
-	u8    reserved2:1;
-	u8    fwd_probe_req:1;
-	u8    keep_alive_filter:1;
-	u8    reserved3:3;
-	u8    reserved4[3];
+	u8     reserved1:1;
+	u8     bssid_filter:1;
+	u8     reserved2:1;
+	u8     fwd_probe_req:1;
+	u8     keep_alive_filter:1;
+	u8     reserved3:3;
+	u8     reserved4[3];
 } __packed;
 
-#define HIF_API_OUI_SIZE                                3
-#define HIF_API_MATCH_DATA_SIZE                         3
-
 struct hif_ie_table_entry {
-	u8    ie_id;
-	u8    has_changed:1;
-	u8    no_longer:1;
-	u8    has_appeared:1;
-	u8    reserved:1;
-	u8    num_match_data:4;
-	u8    oui[HIF_API_OUI_SIZE];
-	u8    match_data[HIF_API_MATCH_DATA_SIZE];
+	u8     ie_id;
+	u8     has_changed:1;
+	u8     no_longer:1;
+	u8     has_appeared:1;
+	u8     reserved:1;
+	u8     num_match_data:4;
+	u8     oui[3];
+	u8     match_data[3];
 } __packed;
 
 struct hif_mib_bcn_filter_table {
-	u32   num_of_info_elmts;
+	__le32 num_of_info_elmts;
 	struct hif_ie_table_entry ie_table[];
 } __packed;
 
 enum hif_beacon_filter {
-	HIF_BEACON_FILTER_DISABLE                  = 0x0,
-	HIF_BEACON_FILTER_ENABLE                   = 0x1,
-	HIF_BEACON_FILTER_AUTO_ERP                 = 0x2
+	HIF_BEACON_FILTER_DISABLE  = 0x0,
+	HIF_BEACON_FILTER_ENABLE   = 0x1,
+	HIF_BEACON_FILTER_AUTO_ERP = 0x2
 };
 
 struct hif_mib_bcn_filter_enable {
-	u32   enable;
-	u32   bcn_count;
-} __packed;
-
-struct hif_mib_group_seq_counter {
-	u32   bits4716;
-	u16   bits1500;
-	u16   reserved;
-} __packed;
-
-struct hif_mib_tsf_counter {
-	u32   tsf_counterlo;
-	u32   tsf_counterhi;
-} __packed;
-
-struct hif_mib_stats_table {
-	s16    latest_snr;
-	u8    latest_rcpi;
-	s8     latest_rssi;
+	__le32 enable;
+	__le32 bcn_count;
 } __packed;
 
 struct hif_mib_extended_count_table {
-	u32   count_plcp_errors;
-	u32   count_fcs_errors;
-	u32   count_tx_packets;
-	u32   count_rx_packets;
-	u32   count_rx_packet_errors;
-	u32   count_rx_decryption_failures;
-	u32   count_rx_mic_failures;
-	u32   count_rx_no_key_failures;
-	u32   count_tx_multicast_frames;
-	u32   count_tx_frames_success;
-	u32   count_tx_frame_failures;
-	u32   count_tx_frames_retried;
-	u32   count_tx_frames_multi_retried;
-	u32   count_rx_frame_duplicates;
-	u32   count_rts_success;
-	u32   count_rts_failures;
-	u32   count_ack_failures;
-	u32   count_rx_multicast_frames;
-	u32   count_rx_frames_success;
-	u32   count_rx_cmacicv_errors;
-	u32   count_rx_cmac_replays;
-	u32   count_rx_mgmt_ccmp_replays;
-	u32   count_rx_bipmic_errors;
-	u32   count_rx_beacon;
-	u32   count_miss_beacon;
-	u32   reserved[15];
+	__le32 count_plcp_errors;
+	__le32 count_fcs_errors;
+	__le32 count_tx_packets;
+	__le32 count_rx_packets;
+	__le32 count_rx_packet_errors;
+	__le32 count_rx_decryption_failures;
+	__le32 count_rx_mic_failures;
+	__le32 count_rx_no_key_failures;
+	__le32 count_tx_multicast_frames;
+	__le32 count_tx_frames_success;
+	__le32 count_tx_frame_failures;
+	__le32 count_tx_frames_retried;
+	__le32 count_tx_frames_multi_retried;
+	__le32 count_rx_frame_duplicates;
+	__le32 count_rts_success;
+	__le32 count_rts_failures;
+	__le32 count_ack_failures;
+	__le32 count_rx_multicast_frames;
+	__le32 count_rx_frames_success;
+	__le32 count_rx_cmacicv_errors;
+	__le32 count_rx_cmac_replays;
+	__le32 count_rx_mgmt_ccmp_replays;
+	__le32 count_rx_bipmic_errors;
+	__le32 count_rx_beacon;
+	__le32 count_miss_beacon;
+	__le32 reserved[15];
 } __packed;
 
 struct hif_mib_count_table {
-	u32   count_plcp_errors;
-	u32   count_fcs_errors;
-	u32   count_tx_packets;
-	u32   count_rx_packets;
-	u32   count_rx_packet_errors;
-	u32   count_rx_decryption_failures;
-	u32   count_rx_mic_failures;
-	u32   count_rx_no_key_failures;
-	u32   count_tx_multicast_frames;
-	u32   count_tx_frames_success;
-	u32   count_tx_frame_failures;
-	u32   count_tx_frames_retried;
-	u32   count_tx_frames_multi_retried;
-	u32   count_rx_frame_duplicates;
-	u32   count_rts_success;
-	u32   count_rts_failures;
-	u32   count_ack_failures;
-	u32   count_rx_multicast_frames;
-	u32   count_rx_frames_success;
-	u32   count_rx_cmacicv_errors;
-	u32   count_rx_cmac_replays;
-	u32   count_rx_mgmt_ccmp_replays;
-	u32   count_rx_bipmic_errors;
-} __packed;
-
-struct hif_mib_max_tx_power_level {
-	s32       max_tx_power_level_rf_port1;
-	s32       max_tx_power_level_rf_port2;
-} __packed;
-
-struct hif_mib_beacon_stats {
-	s32     latest_tbtt_diff;
-	u32    reserved[4];
+	__le32 count_plcp_errors;
+	__le32 count_fcs_errors;
+	__le32 count_tx_packets;
+	__le32 count_rx_packets;
+	__le32 count_rx_packet_errors;
+	__le32 count_rx_decryption_failures;
+	__le32 count_rx_mic_failures;
+	__le32 count_rx_no_key_failures;
+	__le32 count_tx_multicast_frames;
+	__le32 count_tx_frames_success;
+	__le32 count_tx_frame_failures;
+	__le32 count_tx_frames_retried;
+	__le32 count_tx_frames_multi_retried;
+	__le32 count_rx_frame_duplicates;
+	__le32 count_rts_success;
+	__le32 count_rts_failures;
+	__le32 count_ack_failures;
+	__le32 count_rx_multicast_frames;
+	__le32 count_rx_frames_success;
+	__le32 count_rx_cmacicv_errors;
+	__le32 count_rx_cmac_replays;
+	__le32 count_rx_mgmt_ccmp_replays;
+	__le32 count_rx_bipmic_errors;
 } __packed;
 
 struct hif_mib_mac_address {
-	u8    mac_addr[ETH_ALEN];
-	u16   reserved;
-} __packed;
-
-struct hif_mib_dot11_max_transmit_msdu_lifetime {
-	u32   max_life_time;
-} __packed;
-
-struct hif_mib_dot11_max_receive_lifetime {
-	u32   max_life_time;
+	u8     mac_addr[ETH_ALEN];
+	__le16 reserved;
 } __packed;
 
 struct hif_mib_wep_default_key_id {
-	u8    wep_default_key_id;
-	u8    reserved[3];
+	u8     wep_default_key_id;
+	u8     reserved[3];
 } __packed;
 
 struct hif_mib_dot11_rts_threshold {
-	u32   threshold;
+	__le32 threshold;
 } __packed;
 
 struct hif_mib_slot_time {
-	u32   slot_time;
+	__le32 slot_time;
 } __packed;
 
 struct hif_mib_current_tx_power_level {
-	s32   power_level;
+	__le32 power_level; // signed value
 } __packed;
 
 struct hif_mib_non_erp_protection {
-	u8   use_cts_to_self:1;
-	u8   reserved1:7;
-	u8   reserved2[3];
+	u8     use_cts_to_self:1;
+	u8     reserved1:7;
+	u8     reserved2[3];
 } __packed;
 
 enum hif_tmplt {
-	HIF_TMPLT_PRBREQ                           = 0x0,
-	HIF_TMPLT_BCN                              = 0x1,
-	HIF_TMPLT_NULL                             = 0x2,
-	HIF_TMPLT_QOSNUL                           = 0x3,
-	HIF_TMPLT_PSPOLL                           = 0x4,
-	HIF_TMPLT_PRBRES                           = 0x5,
-	HIF_TMPLT_ARP                              = 0x6,
-	HIF_TMPLT_NA                               = 0x7
+	HIF_TMPLT_PRBREQ = 0x0,
+	HIF_TMPLT_BCN    = 0x1,
+	HIF_TMPLT_NULL   = 0x2,
+	HIF_TMPLT_QOSNUL = 0x3,
+	HIF_TMPLT_PSPOLL = 0x4,
+	HIF_TMPLT_PRBRES = 0x5,
+	HIF_TMPLT_ARP    = 0x6,
+	HIF_TMPLT_NA     = 0x7
 };
 
-#define HIF_API_MAX_TEMPLATE_FRAME_SIZE                              700
+#define HIF_API_MAX_TEMPLATE_FRAME_SIZE 700
 
 struct hif_mib_template_frame {
-	u8    frame_type;
-	u8    init_rate:7;
-	u8    mode:1;
-	u16   frame_length;
-	u8    frame[HIF_API_MAX_TEMPLATE_FRAME_SIZE];
+	u8     frame_type;
+	u8     init_rate:7;
+	u8     mode:1;
+	__le16 frame_length;
+	u8     frame[];
 } __packed;
 
 struct hif_mib_beacon_wake_up_period {
-	u8    wakeup_period_min;
-	u8    receive_dtim:1;
-	u8    reserved1:7;
-	u8    wakeup_period_max;
-	u8    reserved2;
+	u8     wakeup_period_min;
+	u8     receive_dtim:1;
+	u8     reserved1:7;
+	u8     wakeup_period_max;
+	u8     reserved2;
 } __packed;
 
 struct hif_mib_rcpi_rssi_threshold {
-	u8    detection:1;
-	u8    rcpi_rssi:1;
-	u8    upperthresh:1;
-	u8    lowerthresh:1;
-	u8    reserved:4;
-	u8    lower_threshold;
-	u8    upper_threshold;
-	u8    rolling_average_count;
+	u8     detection:1;
+	u8     rcpi_rssi:1;
+	u8     upperthresh:1;
+	u8     lowerthresh:1;
+	u8     reserved:4;
+	u8     lower_threshold;
+	u8     upper_threshold;
+	u8     rolling_average_count;
 } __packed;
 
 #define DEFAULT_BA_MAX_RX_BUFFER_SIZE 16
 
 struct hif_mib_block_ack_policy {
-	u8    block_ack_tx_tid_policy;
-	u8    reserved1;
-	u8    block_ack_rx_tid_policy;
-	u8    block_ack_rx_max_buffer_size;
-} __packed;
-
-struct hif_mib_override_int_rate {
-	u8    internal_tx_rate;
-	u8    non_erp_internal_tx_rate;
-	u8    reserved[2];
+	u8     block_ack_tx_tid_policy;
+	u8     reserved1;
+	u8     block_ack_rx_tid_policy;
+	u8     block_ack_rx_max_buffer_size;
 } __packed;
 
 enum hif_mpdu_start_spacing {
-	HIF_MPDU_START_SPACING_NO_RESTRIC          = 0x0,
-	HIF_MPDU_START_SPACING_QUARTER             = 0x1,
-	HIF_MPDU_START_SPACING_HALF                = 0x2,
-	HIF_MPDU_START_SPACING_ONE                 = 0x3,
-	HIF_MPDU_START_SPACING_TWO                 = 0x4,
-	HIF_MPDU_START_SPACING_FOUR                = 0x5,
-	HIF_MPDU_START_SPACING_EIGHT               = 0x6,
-	HIF_MPDU_START_SPACING_SIXTEEN             = 0x7
+	HIF_MPDU_START_SPACING_NO_RESTRIC = 0x0,
+	HIF_MPDU_START_SPACING_QUARTER    = 0x1,
+	HIF_MPDU_START_SPACING_HALF       = 0x2,
+	HIF_MPDU_START_SPACING_ONE        = 0x3,
+	HIF_MPDU_START_SPACING_TWO        = 0x4,
+	HIF_MPDU_START_SPACING_FOUR       = 0x5,
+	HIF_MPDU_START_SPACING_EIGHT      = 0x6,
+	HIF_MPDU_START_SPACING_SIXTEEN    = 0x7
 };
 
 struct hif_mib_set_association_mode {
-	u8    preambtype_use:1;
-	u8    mode:1;
-	u8    rateset:1;
-	u8    spacing:1;
-	u8    reserved1:4;
-	u8    short_preamble:1;
-	u8    reserved2:7;
-	u8    greenfield:1;
-	u8    reserved3:7;
-	u8    mpdu_start_spacing;
-	u32   basic_rate_set;
+	u8     preambtype_use:1;
+	u8     mode:1;
+	u8     rateset:1;
+	u8     spacing:1;
+	u8     reserved1:4;
+	u8     short_preamble:1;
+	u8     reserved2:7;
+	u8     greenfield:1;
+	u8     reserved3:7;
+	u8     mpdu_start_spacing;
+	__le32 basic_rate_set;
 } __packed;
 
 struct hif_mib_set_uapsd_information {
-	u8    trig_bckgrnd:1;
-	u8    trig_be:1;
-	u8    trig_video:1;
-	u8    trig_voice:1;
-	u8    reserved1:4;
-	u8    deliv_bckgrnd:1;
-	u8    deliv_be:1;
-	u8    deliv_video:1;
-	u8    deliv_voice:1;
-	u8    reserved2:4;
-	u16   min_auto_trigger_interval;
-	u16   max_auto_trigger_interval;
-	u16   auto_trigger_step;
+	u8     trig_bckgrnd:1;
+	u8     trig_be:1;
+	u8     trig_video:1;
+	u8     trig_voice:1;
+	u8     reserved1:4;
+	u8     deliv_bckgrnd:1;
+	u8     deliv_be:1;
+	u8     deliv_video:1;
+	u8     deliv_voice:1;
+	u8     reserved2:4;
+	__le16 min_auto_trigger_interval;
+	__le16 max_auto_trigger_interval;
+	__le16 auto_trigger_step;
 } __packed;
 
 struct hif_mib_tx_rate_retry_policy {
-	u8    policy_index;
-	u8    short_retry_count;
-	u8    long_retry_count;
-	u8    first_rate_sel:2;
-	u8    terminate:1;
-	u8    count_init:1;
-	u8    reserved1:4;
-	u8    rate_recovery_count;
-	u8    reserved2[3];
-	u8    rates[12];
+	u8     policy_index;
+	u8     short_retry_count;
+	u8     long_retry_count;
+	u8     first_rate_sel:2;
+	u8     terminate:1;
+	u8     count_init:1;
+	u8     reserved1:4;
+	u8     rate_recovery_count;
+	u8     reserved2[3];
+	u8     rates[12];
 } __packed;
 
-#define HIF_MIB_NUM_TX_RATE_RETRY_POLICIES    15
+#define HIF_TX_RETRY_POLICY_MAX     15
+#define HIF_TX_RETRY_POLICY_INVALID HIF_TX_RETRY_POLICY_MAX
 
 struct hif_mib_set_tx_rate_retry_policy {
-	u8    num_tx_rate_policies;
-	u8    reserved[3];
+	u8     num_tx_rate_policies;
+	u8     reserved[3];
 	struct hif_mib_tx_rate_retry_policy tx_rate_retry_policy[];
 } __packed;
 
 struct hif_mib_protected_mgmt_policy {
-	u8   pmf_enable:1;
-	u8   unpmf_allowed:1;
-	u8   host_enc_auth_frames:1;
-	u8   reserved1:5;
-	u8   reserved2[3];
-} __packed;
-
-struct hif_mib_set_ht_protection {
-	u8   dual_cts_prot:1;
-	u8   reserved1:7;
-	u8   reserved2[3];
+	u8     pmf_enable:1;
+	u8     unpmf_allowed:1;
+	u8     host_enc_auth_frames:1;
+	u8     reserved1:5;
+	u8     reserved2[3];
 } __packed;
 
 struct hif_mib_keep_alive_period {
-	u16   keep_alive_period;
-	u8    reserved[2];
-} __packed;
-
-struct hif_mib_arp_keep_alive_period {
-	u16   arp_keep_alive_period;
-	u8    encr_type;
-	u8    reserved;
-	u8    sender_ipv4_address[HIF_API_IPV4_ADDRESS_SIZE];
-	u8    target_ipv4_address[HIF_API_IPV4_ADDRESS_SIZE];
-} __packed;
-
-struct hif_mib_inactivity_timer {
-	u8    min_active_time;
-	u8    max_active_time;
-	u16   reserved;
-} __packed;
-
-struct hif_mib_interface_protection {
-	u8   use_cts_prot:1;
-	u8   reserved1:7;
-	u8   reserved2[3];
+	__le16 keep_alive_period;
+	u8     reserved[2];
 } __packed;
 
 #endif
diff --git a/drivers/staging/wfx/hif_rx.c b/drivers/staging/wfx/hif_rx.c
index 33c22c5d629d..b786714a8755 100644
--- a/drivers/staging/wfx/hif_rx.c
+++ b/drivers/staging/wfx/hif_rx.c
@@ -158,26 +158,37 @@ static int hif_event_indication(struct wfx_dev *wdev,
 {
 	struct wfx_vif *wvif = wdev_to_wvif(wdev, hif->interface);
 	const struct hif_ind_event *body = buf;
-	struct wfx_hif_event *event;
-	int first;
 
-	WARN_ON(!wvif);
-	if (!wvif)
+	if (!wvif) {
+		dev_warn(wdev->dev, "received event for non-existent vif\n");
 		return 0;
+	}
 
-	event = kzalloc(sizeof(*event), GFP_KERNEL);
-	if (!event)
-		return -ENOMEM;
-
-	memcpy(&event->evt, body, sizeof(struct hif_ind_event));
-	spin_lock(&wvif->event_queue_lock);
-	first = list_empty(&wvif->event_queue);
-	list_add_tail(&event->link, &wvif->event_queue);
-	spin_unlock(&wvif->event_queue_lock);
-
-	if (first)
-		schedule_work(&wvif->event_handler_work);
-
+	switch (body->event_id) {
+	case HIF_EVENT_IND_RCPI_RSSI:
+		wfx_event_report_rssi(wvif, body->event_data.rcpi_rssi);
+		break;
+	case HIF_EVENT_IND_BSSLOST:
+		schedule_delayed_work(&wvif->beacon_loss_work, 0);
+		break;
+	case HIF_EVENT_IND_BSSREGAINED:
+		cancel_delayed_work(&wvif->beacon_loss_work);
+		dev_dbg(wdev->dev, "ignore BSSREGAINED indication\n");
+		break;
+	case HIF_EVENT_IND_PS_MODE_ERROR:
+		dev_warn(wdev->dev, "error while processing power save request: %d\n",
+			 body->event_data.ps_mode_error);
+		if (body->event_data.ps_mode_error ==
+		    HIF_PS_ERROR_AP_NOT_RESP_TO_POLL) {
+			wvif->bss_not_support_ps_poll = true;
+			schedule_work(&wvif->update_pm_work);
+		}
+		break;
+	default:
+		dev_warn(wdev->dev, "unhandled event indication: %.2x\n",
+			 body->event_id);
+		break;
+	}
 	return 0;
 }
 
@@ -224,53 +235,21 @@ static int hif_suspend_resume_indication(struct wfx_dev *wdev,
 	struct wfx_vif *wvif = wdev_to_wvif(wdev, hif->interface);
 	const struct hif_ind_suspend_resume_tx *body = buf;
 
-	WARN_ON(!wvif);
-	WARN(!body->suspend_resume_flags.bc_mc_only, "unsupported suspend/resume notification");
-	if (body->suspend_resume_flags.resume)
-		wfx_suspend_resume_mc(wvif, STA_NOTIFY_AWAKE);
-	else
-		wfx_suspend_resume_mc(wvif, STA_NOTIFY_SLEEP);
-
-	return 0;
-}
-
-static int hif_error_indication(struct wfx_dev *wdev,
-				const struct hif_msg *hif, const void *buf)
-{
-	const struct hif_ind_error *body = buf;
-	u8 *pRollback = (u8 *) body->data;
-	u32 *pStatus = (u32 *) body->data;
-
-	switch (body->type) {
-	case HIF_ERROR_FIRMWARE_ROLLBACK:
-		dev_err(wdev->dev,
-			"asynchronous error: firmware rollback error %d\n",
-			*pRollback);
-		break;
-	case HIF_ERROR_FIRMWARE_DEBUG_ENABLED:
-		dev_err(wdev->dev, "asynchronous error: firmware debug feature enabled\n");
-		break;
-	case HIF_ERROR_OUTDATED_SESSION_KEY:
-		dev_err(wdev->dev, "asynchronous error: secure link outdated key: %#.8x\n",
-			*pStatus);
-		break;
-	case HIF_ERROR_INVALID_SESSION_KEY:
-		dev_err(wdev->dev, "asynchronous error: invalid session key\n");
-		break;
-	case HIF_ERROR_OOR_VOLTAGE:
-		dev_err(wdev->dev, "asynchronous error: out-of-range overvoltage: %#.8x\n",
-			*pStatus);
-		break;
-	case HIF_ERROR_PDS_VERSION:
-		dev_err(wdev->dev,
-			"asynchronous error: wrong PDS payload or version: %#.8x\n",
-			*pStatus);
-		break;
-	default:
-		dev_err(wdev->dev, "asynchronous error: unknown (%d)\n",
-			body->type);
-		break;
+	if (body->suspend_resume_flags.bc_mc_only) {
+		WARN_ON(!wvif);
+		if (body->suspend_resume_flags.resume)
+			wfx_suspend_resume_mc(wvif, STA_NOTIFY_AWAKE);
+		else
+			wfx_suspend_resume_mc(wvif, STA_NOTIFY_SLEEP);
+	} else {
+		WARN(body->peer_sta_set, "misunderstood indication");
+		WARN(hif->interface != 2, "misunderstood indication");
+		if (body->suspend_resume_flags.resume)
+			wfx_suspend_hot_dev(wdev, STA_NOTIFY_AWAKE);
+		else
+			wfx_suspend_hot_dev(wdev, STA_NOTIFY_SLEEP);
 	}
+
 	return 0;
 }
 
@@ -304,14 +283,89 @@ static int hif_generic_indication(struct wfx_dev *wdev,
 	}
 }
 
+static const struct {
+	int val;
+	const char *str;
+	bool has_param;
+} hif_errors[] = {
+	{ HIF_ERROR_FIRMWARE_ROLLBACK,
+		"rollback status" },
+	{ HIF_ERROR_FIRMWARE_DEBUG_ENABLED,
+		"debug feature enabled" },
+	{ HIF_ERROR_PDS_PAYLOAD,
+		"PDS version is not supported" },
+	{ HIF_ERROR_PDS_TESTFEATURE,
+		"PDS ask for an unknown test mode" },
+	{ HIF_ERROR_OOR_VOLTAGE,
+		"out-of-range power supply voltage", true },
+	{ HIF_ERROR_OOR_TEMPERATURE,
+		"out-of-range temperature", true },
+	{ HIF_ERROR_SLK_REQ_DURING_KEY_EXCHANGE,
+		"secure link does not expect request during key exchange" },
+	{ HIF_ERROR_SLK_SESSION_KEY,
+		"secure link session key is invalid" },
+	{ HIF_ERROR_SLK_OVERFLOW,
+		"secure link overflow" },
+	{ HIF_ERROR_SLK_WRONG_ENCRYPTION_STATE,
+		"secure link messages list does not match message encryption" },
+	{ HIF_ERROR_HIF_BUS_FREQUENCY_TOO_LOW,
+		"bus clock is too slow (<1kHz)" },
+	{ HIF_ERROR_HIF_RX_DATA_TOO_LARGE,
+		"HIF message too large" },
+	// Following errors only exists in old firmware versions:
+	{ HIF_ERROR_HIF_TX_QUEUE_FULL,
+		"HIF messages queue is full" },
+	{ HIF_ERROR_HIF_BUS,
+		"HIF bus" },
+	{ HIF_ERROR_SLK_MULTI_TX_UNSUPPORTED,
+		"secure link does not support multi-tx confirmations" },
+	{ HIF_ERROR_SLK_OUTDATED_SESSION_KEY,
+		"secure link session key is outdated" },
+	{ HIF_ERROR_SLK_DECRYPTION,
+		"secure link params (nonce or tag) mismatch" },
+};
+
+static int hif_error_indication(struct wfx_dev *wdev,
+				const struct hif_msg *hif, const void *buf)
+{
+	const struct hif_ind_error *body = buf;
+	int type = le32_to_cpu(body->type);
+	int param = (s8)body->data[0];
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hif_errors); i++)
+		if (type == hif_errors[i].val)
+			break;
+	if (i < ARRAY_SIZE(hif_errors))
+		if (hif_errors[i].has_param)
+			dev_err(wdev->dev, "asynchronous error: %s: %d\n",
+				hif_errors[i].str, param);
+		else
+			dev_err(wdev->dev, "asynchronous error: %s\n",
+				hif_errors[i].str);
+	else
+		dev_err(wdev->dev, "asynchronous error: unknown: %08x\n", type);
+	print_hex_dump(KERN_INFO, "hif: ", DUMP_PREFIX_OFFSET,
+		       16, 1, hif, hif->len, false);
+	wdev->chip_frozen = true;
+
+	return 0;
+};
+
 static int hif_exception_indication(struct wfx_dev *wdev,
 				    const struct hif_msg *hif, const void *buf)
 {
-	size_t len = hif->len - 4; // drop header
+	const struct hif_ind_exception *body = buf;
+	int type = le32_to_cpu(body->type);
 
-	dev_err(wdev->dev, "firmware exception\n");
-	print_hex_dump_bytes("Dump: ", DUMP_PREFIX_NONE, buf, len);
-	wdev->chip_frozen = 1;
+	if (type == 4)
+		dev_err(wdev->dev, "firmware assert %d\n",
+			le32_to_cpup((__le32 *)body->data));
+	else
+		dev_err(wdev->dev, "firmware exception\n");
+	print_hex_dump(KERN_INFO, "hif: ", DUMP_PREFIX_OFFSET,
+		       16, 1, hif, hif->len, false);
+	wdev->chip_frozen = true;
 
 	return -1;
 }
diff --git a/drivers/staging/wfx/hif_tx.c b/drivers/staging/wfx/hif_tx.c
index 77bca43aca42..e8f3c5f9ce7b 100644
--- a/drivers/staging/wfx/hif_tx.c
+++ b/drivers/staging/wfx/hif_tx.c
@@ -91,7 +91,7 @@ int wfx_cmd_send(struct wfx_dev *wdev, struct hif_msg *request, void *reply,
 	if (!ret) {
 		dev_err(wdev->dev, "chip did not answer\n");
 		wfx_pending_dump_old_frames(wdev, 3000);
-		wdev->chip_frozen = 1;
+		wdev->chip_frozen = true;
 		reinit_completion(&wdev->hif_cmd.done);
 		ret = -ETIMEDOUT;
 	} else {
@@ -296,7 +296,10 @@ int hif_join(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf,
 	struct hif_msg *hif;
 	struct hif_req_join *body = wfx_alloc_hif(sizeof(*body), &hif);
 
+	WARN_ON(!conf->beacon_int);
 	WARN_ON(!conf->basic_rates);
+	WARN_ON(sizeof(body->ssid) < ssidlen);
+	WARN(!conf->ibss_joined && !ssidlen, "joining an unknown BSS");
 	body->infrastructure_bss_mode = !conf->ibss_joined;
 	body->short_preamble = conf->use_short_preamble;
 	if (channel && channel->flags & IEEE80211_CHAN_NO_IR)
@@ -308,7 +311,7 @@ int hif_join(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf,
 	body->basic_rate_set =
 		cpu_to_le32(wfx_rate_mask_to_hw(wvif->wdev, conf->basic_rates));
 	memcpy(body->bssid, conf->bssid, sizeof(body->bssid));
-	if (!conf->ibss_joined && ssid) {
+	if (ssid) {
 		body->ssid_length = cpu_to_le32(ssidlen);
 		memcpy(body->ssid, ssid, ssidlen);
 	}
@@ -318,17 +321,15 @@ int hif_join(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf,
 	return ret;
 }
 
-int hif_set_bss_params(struct wfx_vif *wvif,
-		       const struct hif_req_set_bss_params *arg)
+int hif_set_bss_params(struct wfx_vif *wvif, int aid, int beacon_lost_count)
 {
 	int ret;
 	struct hif_msg *hif;
-	struct hif_req_set_bss_params *body = wfx_alloc_hif(sizeof(*body),
-							    &hif);
+	struct hif_req_set_bss_params *body =
+		wfx_alloc_hif(sizeof(*body), &hif);
 
-	memcpy(body, arg, sizeof(*body));
-	cpu_to_le16s(&body->aid);
-	cpu_to_le32s(&body->operational_rate_set);
+	body->aid = cpu_to_le16(aid);
+	body->beacon_lost_count = beacon_lost_count;
 	wfx_fill_header(hif, wvif->id, HIF_REQ_ID_SET_BSS_PARAMS,
 			sizeof(*body));
 	ret = wfx_cmd_send(wvif->wdev, hif, NULL, 0, false);
@@ -428,6 +429,7 @@ int hif_start(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf,
 	struct hif_msg *hif;
 	struct hif_req_start *body = wfx_alloc_hif(sizeof(*body), &hif);
 
+	WARN_ON(!conf->beacon_int);
 	body->dtim_period = conf->dtim_period;
 	body->short_preamble = conf->use_short_preamble;
 	body->channel_number = cpu_to_le16(channel->hw_value);
diff --git a/drivers/staging/wfx/hif_tx.h b/drivers/staging/wfx/hif_tx.h
index f8520a14c14c..038ea54e2574 100644
--- a/drivers/staging/wfx/hif_tx.h
+++ b/drivers/staging/wfx/hif_tx.h
@@ -48,8 +48,7 @@ int hif_stop_scan(struct wfx_vif *wvif);
 int hif_join(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf,
 	     struct ieee80211_channel *channel, const u8 *ssid, int ssidlen);
 int hif_set_pm(struct wfx_vif *wvif, bool ps, int dynamic_ps_timeout);
-int hif_set_bss_params(struct wfx_vif *wvif,
-		       const struct hif_req_set_bss_params *arg);
+int hif_set_bss_params(struct wfx_vif *wvif, int aid, int beacon_lost_count);
 int hif_add_key(struct wfx_dev *wdev, const struct hif_req_add_key *arg);
 int hif_remove_key(struct wfx_dev *wdev, int idx);
 int hif_set_edca_queue_params(struct wfx_vif *wvif, u16 queue,
diff --git a/drivers/staging/wfx/hif_tx_mib.c b/drivers/staging/wfx/hif_tx_mib.c
new file mode 100644
index 000000000000..6fdde5a4c9a1
--- /dev/null
+++ b/drivers/staging/wfx/hif_tx_mib.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Implementation of host-to-chip MIBs of WFxxx Split Mac (WSM) API.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ * Copyright (C) 2010, ST-Ericsson SA
+ */
+
+#include <linux/etherdevice.h>
+
+#include "wfx.h"
+#include "hif_tx.h"
+#include "hif_tx_mib.h"
+#include "hif_api_mib.h"
+
+int hif_set_output_power(struct wfx_vif *wvif, int val)
+{
+	struct hif_mib_current_tx_power_level arg = {
+		.power_level = cpu_to_le32(val * 10),
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_CURRENT_TX_POWER_LEVEL,
+			     &arg, sizeof(arg));
+}
+
+int hif_set_beacon_wakeup_period(struct wfx_vif *wvif,
+				 unsigned int dtim_interval,
+				 unsigned int listen_interval)
+{
+	struct hif_mib_beacon_wake_up_period val = {
+		.wakeup_period_min = dtim_interval,
+		.receive_dtim = 0,
+		.wakeup_period_max = cpu_to_le16(listen_interval),
+	};
+
+	if (dtim_interval > 0xFF || listen_interval > 0xFFFF)
+		return -EINVAL;
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_BEACON_WAKEUP_PERIOD,
+			     &val, sizeof(val));
+}
+
+int hif_set_rcpi_rssi_threshold(struct wfx_vif *wvif,
+				int rssi_thold, int rssi_hyst)
+{
+	struct hif_mib_rcpi_rssi_threshold arg = {
+		.rolling_average_count = 8,
+		.detection = 1,
+	};
+
+	if (!rssi_thold && !rssi_hyst) {
+		arg.upperthresh = 1;
+		arg.lowerthresh = 1;
+	} else {
+		arg.upper_threshold = rssi_thold + rssi_hyst;
+		arg.upper_threshold = (arg.upper_threshold + 110) * 2;
+		arg.lower_threshold = rssi_thold;
+		arg.lower_threshold = (arg.lower_threshold + 110) * 2;
+	}
+
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_RCPI_RSSI_THRESHOLD, &arg, sizeof(arg));
+}
+
+int hif_get_counters_table(struct wfx_dev *wdev, int vif_id,
+			   struct hif_mib_extended_count_table *arg)
+{
+	if (wfx_api_older_than(wdev, 1, 3)) {
+		// extended_count_table is wider than count_table
+		memset(arg, 0xFF, sizeof(*arg));
+		return hif_read_mib(wdev, vif_id, HIF_MIB_ID_COUNTERS_TABLE,
+				    arg, sizeof(struct hif_mib_count_table));
+	} else {
+		return hif_read_mib(wdev, vif_id,
+				    HIF_MIB_ID_EXTENDED_COUNTERS_TABLE, arg,
+				sizeof(struct hif_mib_extended_count_table));
+	}
+}
+
+int hif_set_macaddr(struct wfx_vif *wvif, u8 *mac)
+{
+	struct hif_mib_mac_address msg = { };
+
+	if (mac)
+		ether_addr_copy(msg.mac_addr, mac);
+	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_DOT11_MAC_ADDRESS,
+			     &msg, sizeof(msg));
+}
+
+int hif_set_rx_filter(struct wfx_vif *wvif,
+		      bool filter_bssid, bool filter_prbreq)
+{
+	struct hif_mib_rx_filter val = { };
+
+	if (filter_bssid)
+		val.bssid_filter = 1;
+	if (!filter_prbreq)
+		val.fwd_probe_req = 1;
+	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_RX_FILTER,
+			     &val, sizeof(val));
+}
+
+int hif_set_beacon_filter_table(struct wfx_vif *wvif, int tbl_len,
+				const struct hif_ie_table_entry *tbl)
+{
+	int ret;
+	struct hif_mib_bcn_filter_table *val;
+	int buf_len = struct_size(val, ie_table, tbl_len);
+
+	val = kzalloc(buf_len, GFP_KERNEL);
+	if (!val)
+		return -ENOMEM;
+	val->num_of_info_elmts = cpu_to_le32(tbl_len);
+	memcpy(val->ie_table, tbl, tbl_len * sizeof(*tbl));
+	ret = hif_write_mib(wvif->wdev, wvif->id,
+			    HIF_MIB_ID_BEACON_FILTER_TABLE, val, buf_len);
+	kfree(val);
+	return ret;
+}
+
+int hif_beacon_filter_control(struct wfx_vif *wvif,
+			      int enable, int beacon_count)
+{
+	struct hif_mib_bcn_filter_enable arg = {
+		.enable = cpu_to_le32(enable),
+		.bcn_count = cpu_to_le32(beacon_count),
+	};
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_BEACON_FILTER_ENABLE,
+			     &arg, sizeof(arg));
+}
+
+int hif_set_operational_mode(struct wfx_dev *wdev, enum hif_op_power_mode mode)
+{
+	struct hif_mib_gl_operational_power_mode val = {
+		.power_mode = mode,
+		.wup_ind_activation = 1,
+	};
+
+	return hif_write_mib(wdev, -1, HIF_MIB_ID_GL_OPERATIONAL_POWER_MODE,
+			     &val, sizeof(val));
+}
+
+int hif_set_template_frame(struct wfx_vif *wvif, struct sk_buff *skb,
+			   u8 frame_type, int init_rate)
+{
+	struct hif_mib_template_frame *arg;
+
+	WARN(skb->len > HIF_API_MAX_TEMPLATE_FRAME_SIZE, "frame is too big");
+	skb_push(skb, 4);
+	arg = (struct hif_mib_template_frame *)skb->data;
+	skb_pull(skb, 4);
+	arg->init_rate = init_rate;
+	arg->frame_type = frame_type;
+	arg->frame_length = cpu_to_le16(skb->len);
+	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_TEMPLATE_FRAME,
+			     arg, sizeof(*arg) + skb->len);
+}
+
+int hif_set_mfp(struct wfx_vif *wvif, bool capable, bool required)
+{
+	struct hif_mib_protected_mgmt_policy val = { };
+
+	WARN(required && !capable, "incoherent arguments");
+	if (capable) {
+		val.pmf_enable = 1;
+		val.host_enc_auth_frames = 1;
+	}
+	if (!required)
+		val.unpmf_allowed = 1;
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_PROTECTED_MGMT_POLICY,
+			     &val, sizeof(val));
+}
+
+int hif_set_block_ack_policy(struct wfx_vif *wvif,
+			     u8 tx_tid_policy, u8 rx_tid_policy)
+{
+	struct hif_mib_block_ack_policy val = {
+		.block_ack_tx_tid_policy = tx_tid_policy,
+		.block_ack_rx_tid_policy = rx_tid_policy,
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_BLOCK_ACK_POLICY,
+			     &val, sizeof(val));
+}
+
+int hif_set_association_mode(struct wfx_vif *wvif,
+			     struct ieee80211_bss_conf *info)
+{
+	struct ieee80211_sta *sta = NULL;
+	struct hif_mib_set_association_mode val = {
+		.preambtype_use = 1,
+		.mode = 1,
+		.spacing = 1,
+		.short_preamble = info->use_short_preamble,
+	};
+
+	rcu_read_lock(); // protect sta
+	if (info->bssid && !info->ibss_joined)
+		sta = ieee80211_find_sta(wvif->vif, info->bssid);
+
+	// FIXME: it is strange to not retrieve all information from bss_info
+	if (sta && sta->ht_cap.ht_supported) {
+		val.mpdu_start_spacing = sta->ht_cap.ampdu_density;
+		if (!(info->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT))
+			val.greenfield = !!(sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD);
+	}
+	rcu_read_unlock();
+
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_SET_ASSOCIATION_MODE, &val, sizeof(val));
+}
+
+int hif_set_tx_rate_retry_policy(struct wfx_vif *wvif,
+				 int policy_index, uint8_t *rates)
+{
+	struct hif_mib_set_tx_rate_retry_policy *arg;
+	size_t size = struct_size(arg, tx_rate_retry_policy, 1);
+	int ret;
+
+	arg = kzalloc(size, GFP_KERNEL);
+	arg->num_tx_rate_policies = 1;
+	arg->tx_rate_retry_policy[0].policy_index = policy_index;
+	arg->tx_rate_retry_policy[0].short_retry_count = 255;
+	arg->tx_rate_retry_policy[0].long_retry_count = 255;
+	arg->tx_rate_retry_policy[0].first_rate_sel = 1;
+	arg->tx_rate_retry_policy[0].terminate = 1;
+	arg->tx_rate_retry_policy[0].count_init = 1;
+	memcpy(&arg->tx_rate_retry_policy[0].rates, rates,
+	       sizeof(arg->tx_rate_retry_policy[0].rates));
+	ret = hif_write_mib(wvif->wdev, wvif->id,
+			    HIF_MIB_ID_SET_TX_RATE_RETRY_POLICY, arg, size);
+	kfree(arg);
+	return ret;
+}
+
+int hif_set_mac_addr_condition(struct wfx_vif *wvif,
+			       int idx, const u8 *mac_addr)
+{
+	struct hif_mib_mac_addr_data_frame_condition val = {
+		.condition_idx = idx,
+		.address_type = HIF_MAC_ADDR_A1,
+	};
+
+	ether_addr_copy(val.mac_address, mac_addr);
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_MAC_ADDR_DATAFRAME_CONDITION,
+			     &val, sizeof(val));
+}
+
+int hif_set_uc_mc_bc_condition(struct wfx_vif *wvif, int idx, u8 allowed_frames)
+{
+	struct hif_mib_uc_mc_bc_data_frame_condition val = {
+		.condition_idx = idx,
+		.allowed_frames = allowed_frames,
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_UC_MC_BC_DATAFRAME_CONDITION,
+			     &val, sizeof(val));
+}
+
+int hif_set_config_data_filter(struct wfx_vif *wvif, bool enable, int idx,
+			       int mac_filters, int frames_types_filters)
+{
+	struct hif_mib_config_data_filter val = {
+		.enable = enable,
+		.filter_idx = idx,
+		.mac_cond = mac_filters,
+		.uc_mc_bc_cond = frames_types_filters,
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_CONFIG_DATA_FILTER, &val, sizeof(val));
+}
+
+int hif_set_data_filtering(struct wfx_vif *wvif, bool enable, bool invert)
+{
+	struct hif_mib_set_data_filtering val = {
+		.enable = enable,
+		.invert_matching = invert,
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_SET_DATA_FILTERING, &val, sizeof(val));
+}
+
+int hif_keep_alive_period(struct wfx_vif *wvif, int period)
+{
+	struct hif_mib_keep_alive_period arg = {
+		.keep_alive_period = cpu_to_le16(period),
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_KEEP_ALIVE_PERIOD,
+			     &arg, sizeof(arg));
+};
+
+int hif_set_arp_ipv4_filter(struct wfx_vif *wvif, int idx, __be32 *addr)
+{
+	struct hif_mib_arp_ip_addr_table arg = {
+		.condition_idx = idx,
+		.arp_enable = HIF_ARP_NS_FILTERING_DISABLE,
+	};
+
+	if (addr) {
+		// Caution: type of addr is __be32
+		memcpy(arg.ipv4_address, addr, sizeof(arg.ipv4_address));
+		arg.arp_enable = HIF_ARP_NS_FILTERING_ENABLE;
+	}
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_ARP_IP_ADDRESSES_TABLE,
+			     &arg, sizeof(arg));
+}
+
+int hif_use_multi_tx_conf(struct wfx_dev *wdev, bool enable)
+{
+	struct hif_mib_gl_set_multi_msg arg = {
+		.enable_multi_tx_conf = enable,
+	};
+
+	return hif_write_mib(wdev, -1, HIF_MIB_ID_GL_SET_MULTI_MSG,
+			     &arg, sizeof(arg));
+}
+
+int hif_set_uapsd_info(struct wfx_vif *wvif, unsigned long val)
+{
+	struct hif_mib_set_uapsd_information arg = { };
+
+	if (val & BIT(IEEE80211_AC_VO))
+		arg.trig_voice = 1;
+	if (val & BIT(IEEE80211_AC_VI))
+		arg.trig_video = 1;
+	if (val & BIT(IEEE80211_AC_BE))
+		arg.trig_be = 1;
+	if (val & BIT(IEEE80211_AC_BK))
+		arg.trig_bckgrnd = 1;
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_SET_UAPSD_INFORMATION,
+			     &arg, sizeof(arg));
+}
+
+int hif_erp_use_protection(struct wfx_vif *wvif, bool enable)
+{
+	struct hif_mib_non_erp_protection arg = {
+		.use_cts_to_self = enable,
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_NON_ERP_PROTECTION, &arg, sizeof(arg));
+}
+
+int hif_slot_time(struct wfx_vif *wvif, int val)
+{
+	struct hif_mib_slot_time arg = {
+		.slot_time = cpu_to_le32(val),
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_SLOT_TIME,
+			     &arg, sizeof(arg));
+}
+
+int hif_wep_default_key_id(struct wfx_vif *wvif, int val)
+{
+	struct hif_mib_wep_default_key_id arg = {
+		.wep_default_key_id = val,
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_DOT11_WEP_DEFAULT_KEY_ID,
+			     &arg, sizeof(arg));
+}
+
+int hif_rts_threshold(struct wfx_vif *wvif, int val)
+{
+	struct hif_mib_dot11_rts_threshold arg = {
+		.threshold = cpu_to_le32(val >= 0 ? val : 0xFFFF),
+	};
+
+	return hif_write_mib(wvif->wdev, wvif->id,
+			     HIF_MIB_ID_DOT11_RTS_THRESHOLD, &arg, sizeof(arg));
+}
diff --git a/drivers/staging/wfx/hif_tx_mib.h b/drivers/staging/wfx/hif_tx_mib.h
index 26b1406f9f6c..b72770a4ba12 100644
--- a/drivers/staging/wfx/hif_tx_mib.h
+++ b/drivers/staging/wfx/hif_tx_mib.h
@@ -9,398 +9,50 @@
 #ifndef WFX_HIF_TX_MIB_H
 #define WFX_HIF_TX_MIB_H
 
-#include <linux/etherdevice.h>
-
-#include "wfx.h"
-#include "hif_tx.h"
 #include "hif_api_mib.h"
 
-static inline int hif_set_output_power(struct wfx_vif *wvif, int val)
-{
-	struct hif_mib_current_tx_power_level arg = {
-		.power_level = cpu_to_le32(val * 10),
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_CURRENT_TX_POWER_LEVEL,
-			     &arg, sizeof(arg));
-}
-
-static inline int hif_set_beacon_wakeup_period(struct wfx_vif *wvif,
-					       unsigned int dtim_interval,
-					       unsigned int listen_interval)
-{
-	struct hif_mib_beacon_wake_up_period val = {
-		.wakeup_period_min = dtim_interval,
-		.receive_dtim = 0,
-		.wakeup_period_max = cpu_to_le16(listen_interval),
-	};
-
-	if (dtim_interval > 0xFF || listen_interval > 0xFFFF)
-		return -EINVAL;
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_BEACON_WAKEUP_PERIOD,
-			     &val, sizeof(val));
-}
-
-static inline int hif_set_rcpi_rssi_threshold(struct wfx_vif *wvif,
-					      int rssi_thold, int rssi_hyst)
-{
-	struct hif_mib_rcpi_rssi_threshold arg = {
-		.rolling_average_count = 8,
-		.detection = 1,
-	};
-
-	if (!rssi_thold && !rssi_hyst) {
-		arg.upperthresh = 1;
-		arg.lowerthresh = 1;
-	} else {
-		arg.upper_threshold = rssi_thold + rssi_hyst;
-		arg.upper_threshold = (arg.upper_threshold + 110) * 2;
-		arg.lower_threshold = rssi_thold;
-		arg.lower_threshold = (arg.lower_threshold + 110) * 2;
-	}
-
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_RCPI_RSSI_THRESHOLD, &arg, sizeof(arg));
-}
-
-static inline int hif_get_counters_table(struct wfx_dev *wdev,
-					 struct hif_mib_extended_count_table *arg)
-{
-	if (wfx_api_older_than(wdev, 1, 3)) {
-		// extended_count_table is wider than count_table
-		memset(arg, 0xFF, sizeof(*arg));
-		return hif_read_mib(wdev, 0, HIF_MIB_ID_COUNTERS_TABLE,
-				    arg, sizeof(struct hif_mib_count_table));
-	} else {
-		return hif_read_mib(wdev, 0,
-				    HIF_MIB_ID_EXTENDED_COUNTERS_TABLE, arg,
-				sizeof(struct hif_mib_extended_count_table));
-	}
-}
-
-static inline int hif_set_macaddr(struct wfx_vif *wvif, u8 *mac)
-{
-	struct hif_mib_mac_address msg = { };
-
-	if (mac)
-		ether_addr_copy(msg.mac_addr, mac);
-	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_DOT11_MAC_ADDRESS,
-			     &msg, sizeof(msg));
-}
-
-static inline int hif_set_rx_filter(struct wfx_vif *wvif, bool filter_bssid,
-				    bool fwd_probe_req)
-{
-	struct hif_mib_rx_filter val = { };
-
-	if (filter_bssid)
-		val.bssid_filter = 1;
-	if (fwd_probe_req)
-		val.fwd_probe_req = 1;
-	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_RX_FILTER,
-			     &val, sizeof(val));
-}
-
-static inline int hif_set_beacon_filter_table(struct wfx_vif *wvif,
-					      int tbl_len,
-					      struct hif_ie_table_entry *tbl)
-{
-	int ret;
-	struct hif_mib_bcn_filter_table *val;
-	int buf_len = struct_size(val, ie_table, tbl_len);
-
-	val = kzalloc(buf_len, GFP_KERNEL);
-	if (!val)
-		return -ENOMEM;
-	val->num_of_info_elmts = cpu_to_le32(tbl_len);
-	memcpy(val->ie_table, tbl, tbl_len * sizeof(*tbl));
-	ret = hif_write_mib(wvif->wdev, wvif->id,
-			    HIF_MIB_ID_BEACON_FILTER_TABLE, val, buf_len);
-	kfree(val);
-	return ret;
-}
-
-static inline int hif_beacon_filter_control(struct wfx_vif *wvif,
-					    int enable, int beacon_count)
-{
-	struct hif_mib_bcn_filter_enable arg = {
-		.enable = cpu_to_le32(enable),
-		.bcn_count = cpu_to_le32(beacon_count),
-	};
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_BEACON_FILTER_ENABLE,
-			     &arg, sizeof(arg));
-}
-
-static inline int hif_set_operational_mode(struct wfx_dev *wdev,
-					   enum hif_op_power_mode mode)
-{
-	struct hif_mib_gl_operational_power_mode val = {
-		.power_mode = mode,
-		.wup_ind_activation = 1,
-	};
-
-	return hif_write_mib(wdev, -1, HIF_MIB_ID_GL_OPERATIONAL_POWER_MODE,
-			     &val, sizeof(val));
-}
-
-static inline int hif_set_template_frame(struct wfx_vif *wvif,
-					 struct sk_buff *skb,
-					 u8 frame_type, int init_rate)
-{
-	struct hif_mib_template_frame *arg;
-
-	skb_push(skb, 4);
-	arg = (struct hif_mib_template_frame *)skb->data;
-	skb_pull(skb, 4);
-	arg->init_rate = init_rate;
-	arg->frame_type = frame_type;
-	arg->frame_length = cpu_to_le16(skb->len);
-	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_TEMPLATE_FRAME,
-			     arg, sizeof(*arg));
-}
-
-static inline int hif_set_mfp(struct wfx_vif *wvif, bool capable, bool required)
-{
-	struct hif_mib_protected_mgmt_policy val = { };
-
-	WARN(required && !capable, "incoherent arguments");
-	if (capable) {
-		val.pmf_enable = 1;
-		val.host_enc_auth_frames = 1;
-	}
-	if (!required)
-		val.unpmf_allowed = 1;
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_PROTECTED_MGMT_POLICY,
-			     &val, sizeof(val));
-}
-
-static inline int hif_set_block_ack_policy(struct wfx_vif *wvif,
-					   u8 tx_tid_policy, u8 rx_tid_policy)
-{
-	struct hif_mib_block_ack_policy val = {
-		.block_ack_tx_tid_policy = tx_tid_policy,
-		.block_ack_rx_tid_policy = rx_tid_policy,
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_BLOCK_ACK_POLICY,
-			     &val, sizeof(val));
-}
-
-static inline int hif_set_association_mode(struct wfx_vif *wvif,
-					   struct ieee80211_bss_conf *info)
-{
-	int basic_rates = wfx_rate_mask_to_hw(wvif->wdev, info->basic_rates);
-	struct ieee80211_sta *sta = NULL;
-	struct hif_mib_set_association_mode val = {
-		.preambtype_use = 1,
-		.mode = 1,
-		.rateset = 1,
-		.spacing = 1,
-		.short_preamble = info->use_short_preamble,
-		.basic_rate_set = cpu_to_le32(basic_rates)
-	};
-
-	rcu_read_lock(); // protect sta
-	if (info->bssid && !info->ibss_joined)
-		sta = ieee80211_find_sta(wvif->vif, info->bssid);
-
-	// FIXME: it is strange to not retrieve all information from bss_info
-	if (sta && sta->ht_cap.ht_supported) {
-		val.mpdu_start_spacing = sta->ht_cap.ampdu_density;
-		if (!(info->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT))
-			val.greenfield = !!(sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD);
-	}
-	rcu_read_unlock();
-
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_SET_ASSOCIATION_MODE, &val, sizeof(val));
-}
-
-static inline int hif_set_tx_rate_retry_policy(struct wfx_vif *wvif,
-					       int policy_index, uint8_t *rates)
-{
-	struct hif_mib_set_tx_rate_retry_policy *arg;
-	size_t size = struct_size(arg, tx_rate_retry_policy, 1);
-	int ret;
-
-	arg = kzalloc(size, GFP_KERNEL);
-	arg->num_tx_rate_policies = 1;
-	arg->tx_rate_retry_policy[0].policy_index = policy_index;
-	arg->tx_rate_retry_policy[0].short_retry_count = 255;
-	arg->tx_rate_retry_policy[0].long_retry_count = 255;
-	arg->tx_rate_retry_policy[0].first_rate_sel = 1;
-	arg->tx_rate_retry_policy[0].terminate = 1;
-	arg->tx_rate_retry_policy[0].count_init = 1;
-	memcpy(&arg->tx_rate_retry_policy[0].rates, rates,
-	       sizeof(arg->tx_rate_retry_policy[0].rates));
-	ret = hif_write_mib(wvif->wdev, wvif->id,
-			    HIF_MIB_ID_SET_TX_RATE_RETRY_POLICY, arg, size);
-	kfree(arg);
-	return ret;
-}
-
-static inline int hif_set_mac_addr_condition(struct wfx_vif *wvif,
-					     int idx, const u8 *mac_addr)
-{
-	struct hif_mib_mac_addr_data_frame_condition val = {
-		.condition_idx = idx,
-		.address_type = HIF_MAC_ADDR_A1,
-	};
-
-	ether_addr_copy(val.mac_address, mac_addr);
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_MAC_ADDR_DATAFRAME_CONDITION,
-			     &val, sizeof(val));
-}
-
-static inline int hif_set_uc_mc_bc_condition(struct wfx_vif *wvif,
-					     int idx, u8 allowed_frames)
-{
-	struct hif_mib_uc_mc_bc_data_frame_condition val = {
-		.condition_idx = idx,
-		.allowed_frames = allowed_frames,
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_UC_MC_BC_DATAFRAME_CONDITION,
-			     &val, sizeof(val));
-}
-
-static inline int hif_set_config_data_filter(struct wfx_vif *wvif, bool enable,
-					     int idx, int mac_filters,
-					     int frames_types_filters)
-{
-	struct hif_mib_config_data_filter val = {
-		.enable = enable,
-		.filter_idx = idx,
-		.mac_cond = mac_filters,
-		.uc_mc_bc_cond = frames_types_filters,
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_CONFIG_DATA_FILTER, &val, sizeof(val));
-}
-
-static inline int hif_set_data_filtering(struct wfx_vif *wvif,
-					 bool enable, bool invert)
-{
-	struct hif_mib_set_data_filtering val = {
-		.enable = enable,
-		.invert_matching = invert,
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_SET_DATA_FILTERING, &val, sizeof(val));
-}
-
-static inline int hif_keep_alive_period(struct wfx_vif *wvif, int period)
-{
-	struct hif_mib_keep_alive_period arg = {
-		.keep_alive_period = cpu_to_le16(period),
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_KEEP_ALIVE_PERIOD,
-			     &arg, sizeof(arg));
-};
-
-static inline int hif_set_arp_ipv4_filter(struct wfx_vif *wvif, int idx,
-					  __be32 *addr)
-{
-	struct hif_mib_arp_ip_addr_table arg = {
-		.condition_idx = idx,
-		.arp_enable = HIF_ARP_NS_FILTERING_DISABLE,
-	};
-
-	if (addr) {
-		// Caution: type of addr is __be32
-		memcpy(arg.ipv4_address, addr, sizeof(arg.ipv4_address));
-		arg.arp_enable = HIF_ARP_NS_FILTERING_ENABLE;
-	}
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_ARP_IP_ADDRESSES_TABLE,
-			     &arg, sizeof(arg));
-}
-
-static inline int hif_use_multi_tx_conf(struct wfx_dev *wdev, bool enable)
-{
-	struct hif_mib_gl_set_multi_msg arg = {
-		.enable_multi_tx_conf = enable,
-	};
-
-	return hif_write_mib(wdev, -1, HIF_MIB_ID_GL_SET_MULTI_MSG,
-			     &arg, sizeof(arg));
-}
-
-static inline int hif_set_uapsd_info(struct wfx_vif *wvif, unsigned long val)
-{
-	struct hif_mib_set_uapsd_information arg = { };
-
-	if (val & BIT(IEEE80211_AC_VO))
-		arg.trig_voice = 1;
-	if (val & BIT(IEEE80211_AC_VI))
-		arg.trig_video = 1;
-	if (val & BIT(IEEE80211_AC_BE))
-		arg.trig_be = 1;
-	if (val & BIT(IEEE80211_AC_BK))
-		arg.trig_bckgrnd = 1;
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_SET_UAPSD_INFORMATION,
-			     &arg, sizeof(arg));
-}
-
-static inline int hif_erp_use_protection(struct wfx_vif *wvif, bool enable)
-{
-	struct hif_mib_non_erp_protection arg = {
-		.use_cts_to_self = enable,
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_NON_ERP_PROTECTION, &arg, sizeof(arg));
-}
-
-static inline int hif_slot_time(struct wfx_vif *wvif, int val)
-{
-	struct hif_mib_slot_time arg = {
-		.slot_time = cpu_to_le32(val),
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_SLOT_TIME,
-			     &arg, sizeof(arg));
-}
-
-static inline int hif_dual_cts_protection(struct wfx_vif *wvif, bool enable)
-{
-	struct hif_mib_set_ht_protection arg = {
-		.dual_cts_prot = enable,
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_SET_HT_PROTECTION,
-			     &arg, sizeof(arg));
-}
-
-static inline int hif_wep_default_key_id(struct wfx_vif *wvif, int val)
-{
-	struct hif_mib_wep_default_key_id arg = {
-		.wep_default_key_id = val,
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_DOT11_WEP_DEFAULT_KEY_ID,
-			     &arg, sizeof(arg));
-}
-
-static inline int hif_rts_threshold(struct wfx_vif *wvif, int val)
-{
-	struct hif_mib_dot11_rts_threshold arg = {
-		.threshold = cpu_to_le32(val >= 0 ? val : 0xFFFF),
-	};
-
-	return hif_write_mib(wvif->wdev, wvif->id,
-			     HIF_MIB_ID_DOT11_RTS_THRESHOLD, &arg, sizeof(arg));
-}
+struct wfx_vif;
+struct sk_buff;
+
+int hif_set_output_power(struct wfx_vif *wvif, int val);
+int hif_set_beacon_wakeup_period(struct wfx_vif *wvif,
+				 unsigned int dtim_interval,
+				 unsigned int listen_interval);
+int hif_set_rcpi_rssi_threshold(struct wfx_vif *wvif,
+				int rssi_thold, int rssi_hyst);
+int hif_get_counters_table(struct wfx_dev *wdev, int vif_id,
+			   struct hif_mib_extended_count_table *arg);
+int hif_set_macaddr(struct wfx_vif *wvif, u8 *mac);
+int hif_set_rx_filter(struct wfx_vif *wvif,
+		      bool filter_bssid, bool fwd_probe_req);
+int hif_set_beacon_filter_table(struct wfx_vif *wvif, int tbl_len,
+				const struct hif_ie_table_entry *tbl);
+int hif_beacon_filter_control(struct wfx_vif *wvif,
+			      int enable, int beacon_count);
+int hif_set_operational_mode(struct wfx_dev *wdev, enum hif_op_power_mode mode);
+int hif_set_template_frame(struct wfx_vif *wvif, struct sk_buff *skb,
+			   u8 frame_type, int init_rate);
+int hif_set_mfp(struct wfx_vif *wvif, bool capable, bool required);
+int hif_set_block_ack_policy(struct wfx_vif *wvif,
+			     u8 tx_tid_policy, u8 rx_tid_policy);
+int hif_set_association_mode(struct wfx_vif *wvif,
+			     struct ieee80211_bss_conf *info);
+int hif_set_tx_rate_retry_policy(struct wfx_vif *wvif,
+				 int policy_index, uint8_t *rates);
+int hif_set_mac_addr_condition(struct wfx_vif *wvif,
+			       int idx, const u8 *mac_addr);
+int hif_set_uc_mc_bc_condition(struct wfx_vif *wvif,
+			       int idx, u8 allowed_frames);
+int hif_set_config_data_filter(struct wfx_vif *wvif, bool enable, int idx,
+			       int mac_filters, int frames_types_filters);
+int hif_set_data_filtering(struct wfx_vif *wvif, bool enable, bool invert);
+int hif_keep_alive_period(struct wfx_vif *wvif, int period);
+int hif_set_arp_ipv4_filter(struct wfx_vif *wvif, int idx, __be32 *addr);
+int hif_use_multi_tx_conf(struct wfx_dev *wdev, bool enable);
+int hif_set_uapsd_info(struct wfx_vif *wvif, unsigned long val);
+int hif_erp_use_protection(struct wfx_vif *wvif, bool enable);
+int hif_slot_time(struct wfx_vif *wvif, int val);
+int hif_wep_default_key_id(struct wfx_vif *wvif, int val);
+int hif_rts_threshold(struct wfx_vif *wvif, int val);
 
 #endif
diff --git a/drivers/staging/wfx/key.c b/drivers/staging/wfx/key.c
index 96adfa330604..ceb57cbdfefd 100644
--- a/drivers/staging/wfx/key.c
+++ b/drivers/staging/wfx/key.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
  * Copyright (c) 2010, ST-Ericsson
  */
+#include <linux/etherdevice.h>
 #include <net/mac80211.h>
 
 #include "key.h"
@@ -20,14 +21,12 @@ static int wfx_alloc_key(struct wfx_dev *wdev)
 		return -1;
 
 	wdev->key_map |= BIT(idx);
-	wdev->keys[idx].entry_index = idx;
 	return idx;
 }
 
 static void wfx_free_key(struct wfx_dev *wdev, int idx)
 {
 	WARN(!(wdev->key_map & BIT(idx)), "inconsistent key allocation");
-	memset(&wdev->keys[idx], 0, sizeof(wdev->keys[idx]));
 	wdev->key_map &= ~BIT(idx);
 }
 
@@ -159,7 +158,7 @@ static int wfx_add_key(struct wfx_vif *wvif, struct ieee80211_sta *sta,
 		       struct ieee80211_key_conf *key)
 {
 	int ret;
-	struct hif_req_add_key *k;
+	struct hif_req_add_key k = { };
 	struct ieee80211_key_seq seq;
 	struct wfx_dev *wdev = wvif->wdev;
 	int idx = wfx_alloc_key(wvif->wdev);
@@ -169,44 +168,44 @@ static int wfx_add_key(struct wfx_vif *wvif, struct ieee80211_sta *sta,
 	ieee80211_get_key_rx_seq(key, 0, &seq);
 	if (idx < 0)
 		return -EINVAL;
-	k = &wdev->keys[idx];
-	k->int_id = wvif->id;
+	k.int_id = wvif->id;
+	k.entry_index = idx;
 	if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
 	    key->cipher ==  WLAN_CIPHER_SUITE_WEP104) {
 		if (pairwise)
-			k->type = fill_wep_pair(&k->key.wep_pairwise_key, key,
-						sta->addr);
+			k.type = fill_wep_pair(&k.key.wep_pairwise_key, key,
+					       sta->addr);
 		else
-			k->type = fill_wep_group(&k->key.wep_group_key, key);
+			k.type = fill_wep_group(&k.key.wep_group_key, key);
 	} else if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
 		if (pairwise)
-			k->type = fill_tkip_pair(&k->key.tkip_pairwise_key, key,
-						 sta->addr);
+			k.type = fill_tkip_pair(&k.key.tkip_pairwise_key, key,
+						sta->addr);
 		else
-			k->type = fill_tkip_group(&k->key.tkip_group_key, key,
-						  &seq, wvif->vif->type);
+			k.type = fill_tkip_group(&k.key.tkip_group_key, key,
+						 &seq, wvif->vif->type);
 	} else if (key->cipher == WLAN_CIPHER_SUITE_CCMP) {
 		if (pairwise)
-			k->type = fill_ccmp_pair(&k->key.aes_pairwise_key, key,
-						 sta->addr);
+			k.type = fill_ccmp_pair(&k.key.aes_pairwise_key, key,
+						sta->addr);
 		else
-			k->type = fill_ccmp_group(&k->key.aes_group_key, key,
-						  &seq);
+			k.type = fill_ccmp_group(&k.key.aes_group_key, key,
+						 &seq);
 	} else if (key->cipher ==  WLAN_CIPHER_SUITE_SMS4) {
 		if (pairwise)
-			k->type = fill_sms4_pair(&k->key.wapi_pairwise_key, key,
-						 sta->addr);
+			k.type = fill_sms4_pair(&k.key.wapi_pairwise_key, key,
+						sta->addr);
 		else
-			k->type = fill_sms4_group(&k->key.wapi_group_key, key);
+			k.type = fill_sms4_group(&k.key.wapi_group_key, key);
 	} else if (key->cipher ==  WLAN_CIPHER_SUITE_AES_CMAC) {
-		k->type = fill_aes_cmac_group(&k->key.igtk_group_key, key,
-					      &seq);
+		k.type = fill_aes_cmac_group(&k.key.igtk_group_key, key,
+					     &seq);
 	} else {
 		dev_warn(wdev->dev, "unsupported key type %d\n", key->cipher);
 		wfx_free_key(wdev, idx);
 		return -EOPNOTSUPP;
 	}
-	ret = hif_add_key(wdev, k);
+	ret = hif_add_key(wdev, &k);
 	if (ret) {
 		wfx_free_key(wdev, idx);
 		return -EOPNOTSUPP;
@@ -240,29 +239,3 @@ int wfx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	return ret;
 }
 
-int wfx_upload_keys(struct wfx_vif *wvif)
-{
-	int i;
-	struct hif_req_add_key *key;
-	struct wfx_dev *wdev = wvif->wdev;
-
-	for (i = 0; i < ARRAY_SIZE(wdev->keys); i++) {
-		if (wdev->key_map & BIT(i)) {
-			key = &wdev->keys[i];
-			if (key->int_id == wvif->id)
-				hif_add_key(wdev, key);
-		}
-	}
-	return 0;
-}
-
-void wfx_wep_key_work(struct work_struct *work)
-{
-	struct wfx_vif *wvif = container_of(work, struct wfx_vif, wep_key_work);
-
-	wfx_tx_flush(wvif->wdev);
-	hif_wep_default_key_id(wvif, wvif->wep_default_key_id);
-	wfx_pending_requeue(wvif->wdev, wvif->wep_pending_skb);
-	wvif->wep_pending_skb = NULL;
-	wfx_tx_unlock(wvif->wdev);
-}
diff --git a/drivers/staging/wfx/key.h b/drivers/staging/wfx/key.h
index 9436ccdf4d3b..ff31fc9c565a 100644
--- a/drivers/staging/wfx/key.h
+++ b/drivers/staging/wfx/key.h
@@ -16,7 +16,5 @@ struct wfx_vif;
 int wfx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		struct ieee80211_vif *vif, struct ieee80211_sta *sta,
 		struct ieee80211_key_conf *key);
-int wfx_upload_keys(struct wfx_vif *wvif);
-void wfx_wep_key_work(struct work_struct *work);
 
 #endif /* WFX_STA_H */
diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c
index 3c4c240229ad..742a286c9207 100644
--- a/drivers/staging/wfx/main.c
+++ b/drivers/staging/wfx/main.c
@@ -106,7 +106,7 @@ static const struct ieee80211_supported_band wfx_band_2ghz = {
 		.ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE,
 		.mcs = {
 			.rx_mask = { 0xFF }, // MCS0 to MCS7
-			.rx_highest = 65,
+			.rx_highest = cpu_to_le16(72),
 			.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
 		},
 	},
@@ -133,15 +133,19 @@ static const struct ieee80211_ops wfx_ops = {
 	.remove_interface	= wfx_remove_interface,
 	.config                 = wfx_config,
 	.tx			= wfx_tx,
+	.join_ibss		= wfx_join_ibss,
+	.leave_ibss		= wfx_leave_ibss,
 	.conf_tx		= wfx_conf_tx,
 	.hw_scan		= wfx_hw_scan,
 	.cancel_hw_scan		= wfx_cancel_hw_scan,
+	.start_ap		= wfx_start_ap,
+	.stop_ap		= wfx_stop_ap,
 	.sta_add		= wfx_sta_add,
 	.sta_remove		= wfx_sta_remove,
-	.sta_notify		= wfx_sta_notify,
 	.set_tim		= wfx_set_tim,
 	.set_key		= wfx_set_key,
 	.set_rts_threshold	= wfx_set_rts_threshold,
+	.set_default_unicast_key = wfx_set_default_unicast_key,
 	.bss_info_changed	= wfx_bss_info_changed,
 	.prepare_multicast	= wfx_prepare_multicast,
 	.configure_filter	= wfx_configure_filter,
@@ -268,7 +272,6 @@ static void wfx_free_common(void *data)
 
 	mutex_destroy(&wdev->rx_stats_lock);
 	mutex_destroy(&wdev->conf_mutex);
-	wfx_tx_queues_deinit(wdev);
 	ieee80211_free_hw(wdev->hw);
 }
 
@@ -286,7 +289,6 @@ struct wfx_dev *wfx_init_common(struct device *dev,
 
 	SET_IEEE80211_DEV(hw, dev);
 
-	ieee80211_hw_set(hw, NEED_DTIM_BEFORE_ASSOC);
 	ieee80211_hw_set(hw, TX_AMPDU_SETUP_IN_HW);
 	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
 	ieee80211_hw_set(hw, CONNECTION_MONITOR);
@@ -315,7 +317,7 @@ struct wfx_dev *wfx_init_common(struct device *dev,
 	hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
 	hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
-	hw->wiphy->max_ap_assoc_sta = WFX_MAX_STA_IN_AP_MODE;
+	hw->wiphy->max_ap_assoc_sta = HIF_LINK_ID_MAX;
 	hw->wiphy->max_scan_ssids = 2;
 	hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
 	hw->wiphy->n_iface_combinations = ARRAY_SIZE(wfx_iface_combinations);
@@ -339,6 +341,8 @@ struct wfx_dev *wfx_init_common(struct device *dev,
 	mutex_init(&wdev->conf_mutex);
 	mutex_init(&wdev->rx_stats_lock);
 	init_completion(&wdev->firmware_ready);
+	INIT_DELAYED_WORK(&wdev->cooling_timeout_work,
+			  wfx_cooling_timeout_work);
 	wfx_init_hif_cmd(&wdev->hif_cmd);
 	wfx_tx_queues_init(wdev);
 
diff --git a/drivers/staging/wfx/queue.c b/drivers/staging/wfx/queue.c
index 39d9127ce4b9..0c799cedd101 100644
--- a/drivers/staging/wfx/queue.c
+++ b/drivers/staging/wfx/queue.c
@@ -30,23 +30,32 @@ void wfx_tx_unlock(struct wfx_dev *wdev)
 void wfx_tx_flush(struct wfx_dev *wdev)
 {
 	int ret;
+	int i;
 
 	// Do not wait for any reply if chip is frozen
 	if (wdev->chip_frozen)
 		return;
 
+	wfx_tx_lock(wdev);
 	mutex_lock(&wdev->hif_cmd.lock);
 	ret = wait_event_timeout(wdev->hif.tx_buffers_empty,
 				 !wdev->hif.tx_buffers_used,
 				 msecs_to_jiffies(3000));
+	if (ret) {
+		for (i = 0; i < IEEE80211_NUM_ACS; i++)
+			WARN(atomic_read(&wdev->tx_queue[i].pending_frames),
+			     "there are still %d pending frames on queue %d",
+			     atomic_read(&wdev->tx_queue[i].pending_frames), i);
+	}
 	if (!ret) {
 		dev_warn(wdev->dev, "cannot flush tx buffers (%d still busy)\n",
 			 wdev->hif.tx_buffers_used);
 		wfx_pending_dump_old_frames(wdev, 3000);
 		// FIXME: drop pending frames here
-		wdev->chip_frozen = 1;
+		wdev->chip_frozen = true;
 	}
 	mutex_unlock(&wdev->hif_cmd.lock);
+	wfx_tx_unlock(wdev);
 }
 
 void wfx_tx_lock_flush(struct wfx_dev *wdev)
@@ -55,261 +64,155 @@ void wfx_tx_lock_flush(struct wfx_dev *wdev)
 	wfx_tx_flush(wdev);
 }
 
-void wfx_tx_queues_lock(struct wfx_dev *wdev)
+void wfx_tx_queues_init(struct wfx_dev *wdev)
 {
 	int i;
-	struct wfx_queue *queue;
 
+	skb_queue_head_init(&wdev->tx_pending);
+	init_waitqueue_head(&wdev->tx_dequeue);
 	for (i = 0; i < IEEE80211_NUM_ACS; ++i) {
-		queue = &wdev->tx_queue[i];
-		spin_lock_bh(&queue->queue.lock);
-		if (queue->tx_locked_cnt++ == 0)
-			ieee80211_stop_queue(wdev->hw, queue->queue_id);
-		spin_unlock_bh(&queue->queue.lock);
+		skb_queue_head_init(&wdev->tx_queue[i].normal);
+		skb_queue_head_init(&wdev->tx_queue[i].cab);
 	}
 }
 
-void wfx_tx_queues_unlock(struct wfx_dev *wdev)
+void wfx_tx_queues_check_empty(struct wfx_dev *wdev)
 {
 	int i;
-	struct wfx_queue *queue;
 
+	WARN_ON(!skb_queue_empty_lockless(&wdev->tx_pending));
 	for (i = 0; i < IEEE80211_NUM_ACS; ++i) {
-		queue = &wdev->tx_queue[i];
-		spin_lock_bh(&queue->queue.lock);
-		WARN(!queue->tx_locked_cnt, "queue already unlocked");
-		if (--queue->tx_locked_cnt == 0)
-			ieee80211_wake_queue(wdev->hw, queue->queue_id);
-		spin_unlock_bh(&queue->queue.lock);
+		WARN_ON(atomic_read(&wdev->tx_queue[i].pending_frames));
+		WARN_ON(!skb_queue_empty_lockless(&wdev->tx_queue[i].normal));
+		WARN_ON(!skb_queue_empty_lockless(&wdev->tx_queue[i].cab));
 	}
 }
 
-/* If successful, LOCKS the TX queue! */
-void wfx_tx_queues_wait_empty_vif(struct wfx_vif *wvif)
+static bool __wfx_tx_queue_empty(struct wfx_dev *wdev,
+				 struct sk_buff_head *skb_queue, int vif_id)
 {
-	int i;
-	bool done;
-	struct wfx_queue *queue;
-	struct sk_buff *item;
-	struct wfx_dev *wdev = wvif->wdev;
-	struct hif_msg *hif;
-
-	if (wvif->wdev->chip_frozen) {
-		wfx_tx_lock_flush(wdev);
-		wfx_tx_queues_clear(wdev);
-		return;
-	}
+	struct hif_msg *hif_msg;
+	struct sk_buff *skb;
 
-	do {
-		done = true;
-		wfx_tx_lock_flush(wdev);
-		for (i = 0; i < IEEE80211_NUM_ACS && done; ++i) {
-			queue = &wdev->tx_queue[i];
-			spin_lock_bh(&queue->queue.lock);
-			skb_queue_walk(&queue->queue, item) {
-				hif = (struct hif_msg *) item->data;
-				if (hif->interface == wvif->id)
-					done = false;
-			}
-			spin_unlock_bh(&queue->queue.lock);
-		}
-		if (!done) {
-			wfx_tx_unlock(wdev);
-			msleep(20);
+	spin_lock_bh(&skb_queue->lock);
+	skb_queue_walk(skb_queue, skb) {
+		hif_msg = (struct hif_msg *)skb->data;
+		if (vif_id < 0 || hif_msg->interface == vif_id) {
+			spin_unlock_bh(&skb_queue->lock);
+			return false;
 		}
-	} while (!done);
-}
-
-static void wfx_tx_queue_clear(struct wfx_dev *wdev, struct wfx_queue *queue,
-			       struct sk_buff_head *gc_list)
-{
-	int i;
-	struct sk_buff *item;
-	struct wfx_queue_stats *stats = &wdev->tx_queue_stats;
-
-	spin_lock_bh(&queue->queue.lock);
-	while ((item = __skb_dequeue(&queue->queue)) != NULL)
-		skb_queue_head(gc_list, item);
-	spin_lock_nested(&stats->pending.lock, 1);
-	for (i = 0; i < ARRAY_SIZE(stats->link_map_cache); ++i) {
-		stats->link_map_cache[i] -= queue->link_map_cache[i];
-		queue->link_map_cache[i] = 0;
 	}
-	spin_unlock(&stats->pending.lock);
-	spin_unlock_bh(&queue->queue.lock);
+	spin_unlock_bh(&skb_queue->lock);
+	return true;
 }
 
-void wfx_tx_queues_clear(struct wfx_dev *wdev)
+bool wfx_tx_queue_empty(struct wfx_dev *wdev,
+			struct wfx_queue *queue, int vif_id)
 {
-	int i;
-	struct sk_buff *item;
-	struct sk_buff_head gc_list;
-	struct wfx_queue_stats *stats = &wdev->tx_queue_stats;
-
-	skb_queue_head_init(&gc_list);
-	for (i = 0; i < IEEE80211_NUM_ACS; ++i)
-		wfx_tx_queue_clear(wdev, &wdev->tx_queue[i], &gc_list);
-	wake_up(&stats->wait_link_id_empty);
-	while ((item = skb_dequeue(&gc_list)) != NULL)
-		wfx_skb_dtor(wdev, item);
+	return __wfx_tx_queue_empty(wdev, &queue->normal, vif_id) &&
+	       __wfx_tx_queue_empty(wdev, &queue->cab, vif_id);
 }
 
-void wfx_tx_queues_init(struct wfx_dev *wdev)
+static void __wfx_tx_queue_drop(struct wfx_dev *wdev,
+				struct sk_buff_head *skb_queue, int vif_id,
+				struct sk_buff_head *dropped)
 {
-	int i;
-
-	memset(&wdev->tx_queue_stats, 0, sizeof(wdev->tx_queue_stats));
-	memset(wdev->tx_queue, 0, sizeof(wdev->tx_queue));
-	skb_queue_head_init(&wdev->tx_queue_stats.pending);
-	init_waitqueue_head(&wdev->tx_queue_stats.wait_link_id_empty);
-
-	for (i = 0; i < IEEE80211_NUM_ACS; ++i) {
-		wdev->tx_queue[i].queue_id = i;
-		skb_queue_head_init(&wdev->tx_queue[i].queue);
+	struct sk_buff *skb, *tmp;
+	struct hif_msg *hif_msg;
+
+	spin_lock_bh(&skb_queue->lock);
+	skb_queue_walk_safe(skb_queue, skb, tmp) {
+		hif_msg = (struct hif_msg *)skb->data;
+		if (vif_id < 0 || hif_msg->interface == vif_id) {
+			__skb_unlink(skb, skb_queue);
+			skb_queue_head(dropped, skb);
+		}
 	}
+	spin_unlock_bh(&skb_queue->lock);
 }
 
-void wfx_tx_queues_deinit(struct wfx_dev *wdev)
-{
-	WARN_ON(!skb_queue_empty(&wdev->tx_queue_stats.pending));
-	wfx_tx_queues_clear(wdev);
-}
-
-int wfx_tx_queue_get_num_queued(struct wfx_queue *queue, u32 link_id_map)
+void wfx_tx_queue_drop(struct wfx_dev *wdev, struct wfx_queue *queue,
+		       int vif_id, struct sk_buff_head *dropped)
 {
-	int ret, i;
-
-	if (!link_id_map)
-		return 0;
-
-	spin_lock_bh(&queue->queue.lock);
-	if (link_id_map == (u32)-1) {
-		ret = skb_queue_len(&queue->queue);
-	} else {
-		ret = 0;
-		for (i = 0; i < ARRAY_SIZE(queue->link_map_cache); i++)
-			if (link_id_map & BIT(i))
-				ret += queue->link_map_cache[i];
-	}
-	spin_unlock_bh(&queue->queue.lock);
-	return ret;
+	__wfx_tx_queue_drop(wdev, &queue->cab, vif_id, dropped);
+	__wfx_tx_queue_drop(wdev, &queue->normal, vif_id, dropped);
+	wake_up(&wdev->tx_dequeue);
 }
 
-void wfx_tx_queue_put(struct wfx_dev *wdev, struct wfx_queue *queue,
-		      struct sk_buff *skb)
+void wfx_tx_queues_put(struct wfx_dev *wdev, struct sk_buff *skb)
 {
-	struct wfx_queue_stats *stats = &wdev->tx_queue_stats;
-	struct wfx_tx_priv *tx_priv = wfx_skb_tx_priv(skb);
-
-	WARN(tx_priv->link_id >= ARRAY_SIZE(stats->link_map_cache), "invalid link-id value");
-	spin_lock_bh(&queue->queue.lock);
-	__skb_queue_tail(&queue->queue, skb);
-
-	++queue->link_map_cache[tx_priv->link_id];
-
-	spin_lock_nested(&stats->pending.lock, 1);
-	++stats->link_map_cache[tx_priv->link_id];
-	spin_unlock(&stats->pending.lock);
-	spin_unlock_bh(&queue->queue.lock);
-}
+	struct wfx_queue *queue = &wdev->tx_queue[skb_get_queue_mapping(skb)];
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 
-static struct sk_buff *wfx_tx_queue_get(struct wfx_dev *wdev,
-					struct wfx_queue *queue,
-					u32 link_id_map)
-{
-	struct sk_buff *skb = NULL;
-	struct sk_buff *item;
-	struct wfx_queue_stats *stats = &wdev->tx_queue_stats;
-	struct wfx_tx_priv *tx_priv;
-	bool wakeup_stats = false;
-
-	spin_lock_bh(&queue->queue.lock);
-	skb_queue_walk(&queue->queue, item) {
-		tx_priv = wfx_skb_tx_priv(item);
-		if (link_id_map & BIT(tx_priv->link_id)) {
-			skb = item;
-			break;
-		}
-	}
-	if (skb) {
-		tx_priv = wfx_skb_tx_priv(skb);
-		tx_priv->xmit_timestamp = ktime_get();
-		__skb_unlink(skb, &queue->queue);
-		--queue->link_map_cache[tx_priv->link_id];
-
-		spin_lock_nested(&stats->pending.lock, 1);
-		__skb_queue_tail(&stats->pending, skb);
-		if (!--stats->link_map_cache[tx_priv->link_id])
-			wakeup_stats = true;
-		spin_unlock(&stats->pending.lock);
-	}
-	spin_unlock_bh(&queue->queue.lock);
-	if (wakeup_stats)
-		wake_up(&stats->wait_link_id_empty);
-	return skb;
+	if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM)
+		skb_queue_tail(&queue->cab, skb);
+	else
+		skb_queue_tail(&queue->normal, skb);
 }
 
 int wfx_pending_requeue(struct wfx_dev *wdev, struct sk_buff *skb)
 {
-	struct wfx_queue_stats *stats = &wdev->tx_queue_stats;
-	struct wfx_tx_priv *tx_priv = wfx_skb_tx_priv(skb);
 	struct wfx_queue *queue = &wdev->tx_queue[skb_get_queue_mapping(skb)];
 
 	WARN_ON(skb_get_queue_mapping(skb) > 3);
-	spin_lock_bh(&queue->queue.lock);
-	++queue->link_map_cache[tx_priv->link_id];
-
-	spin_lock_nested(&stats->pending.lock, 1);
-	++stats->link_map_cache[tx_priv->link_id];
-	__skb_unlink(skb, &stats->pending);
-	spin_unlock(&stats->pending.lock);
-	__skb_queue_tail(&queue->queue, skb);
-	spin_unlock_bh(&queue->queue.lock);
+	WARN_ON(!atomic_read(&queue->pending_frames));
+
+	atomic_dec(&queue->pending_frames);
+	skb_unlink(skb, &wdev->tx_pending);
+	wfx_tx_queues_put(wdev, skb);
 	return 0;
 }
 
-int wfx_pending_remove(struct wfx_dev *wdev, struct sk_buff *skb)
+void wfx_pending_drop(struct wfx_dev *wdev, struct sk_buff_head *dropped)
 {
-	struct wfx_queue_stats *stats = &wdev->tx_queue_stats;
-
-	spin_lock_bh(&stats->pending.lock);
-	__skb_unlink(skb, &stats->pending);
-	spin_unlock_bh(&stats->pending.lock);
-	wfx_skb_dtor(wdev, skb);
+	struct wfx_queue *queue;
+	struct sk_buff *skb;
 
-	return 0;
+	WARN(!wdev->chip_frozen, "%s should only be used to recover a frozen device",
+	     __func__);
+	while ((skb = skb_dequeue(&wdev->tx_pending)) != NULL) {
+		queue = &wdev->tx_queue[skb_get_queue_mapping(skb)];
+		WARN_ON(skb_get_queue_mapping(skb) > 3);
+		WARN_ON(!atomic_read(&queue->pending_frames));
+		atomic_dec(&queue->pending_frames);
+		skb_queue_head(dropped, skb);
+	}
 }
 
 struct sk_buff *wfx_pending_get(struct wfx_dev *wdev, u32 packet_id)
 {
-	struct sk_buff *skb;
+	struct wfx_queue *queue;
 	struct hif_req_tx *req;
-	struct wfx_queue_stats *stats = &wdev->tx_queue_stats;
+	struct sk_buff *skb;
 
-	spin_lock_bh(&stats->pending.lock);
-	skb_queue_walk(&stats->pending, skb) {
+	spin_lock_bh(&wdev->tx_pending.lock);
+	skb_queue_walk(&wdev->tx_pending, skb) {
 		req = wfx_skb_txreq(skb);
 		if (req->packet_id == packet_id) {
-			spin_unlock_bh(&stats->pending.lock);
+			spin_unlock_bh(&wdev->tx_pending.lock);
+			queue = &wdev->tx_queue[skb_get_queue_mapping(skb)];
+			WARN_ON(skb_get_queue_mapping(skb) > 3);
+			WARN_ON(!atomic_read(&queue->pending_frames));
+			atomic_dec(&queue->pending_frames);
+			skb_unlink(skb, &wdev->tx_pending);
 			return skb;
 		}
 	}
-	spin_unlock_bh(&stats->pending.lock);
+	spin_unlock_bh(&wdev->tx_pending.lock);
 	WARN(1, "cannot find packet in pending queue");
 	return NULL;
 }
 
 void wfx_pending_dump_old_frames(struct wfx_dev *wdev, unsigned int limit_ms)
 {
-	struct wfx_queue_stats *stats = &wdev->tx_queue_stats;
 	ktime_t now = ktime_get();
 	struct wfx_tx_priv *tx_priv;
 	struct hif_req_tx *req;
 	struct sk_buff *skb;
 	bool first = true;
 
-	spin_lock_bh(&stats->pending.lock);
-	skb_queue_walk(&stats->pending, skb) {
+	spin_lock_bh(&wdev->tx_pending.lock);
+	skb_queue_walk(&wdev->tx_pending, skb) {
 		tx_priv = wfx_skb_tx_priv(skb);
 		req = wfx_skb_txreq(skb);
 		if (ktime_after(now, ktime_add_ms(tx_priv->xmit_timestamp,
@@ -324,7 +227,7 @@ void wfx_pending_dump_old_frames(struct wfx_dev *wdev, unsigned int limit_ms)
 				 ktime_ms_delta(now, tx_priv->xmit_timestamp));
 		}
 	}
-	spin_unlock_bh(&stats->pending.lock);
+	spin_unlock_bh(&wdev->tx_pending.lock);
 }
 
 unsigned int wfx_pending_get_pkt_us_delay(struct wfx_dev *wdev,
@@ -336,138 +239,66 @@ unsigned int wfx_pending_get_pkt_us_delay(struct wfx_dev *wdev,
 	return ktime_us_delta(now, tx_priv->xmit_timestamp);
 }
 
-bool wfx_tx_queues_is_empty(struct wfx_dev *wdev)
+bool wfx_tx_queues_has_cab(struct wfx_vif *wvif)
 {
+	struct wfx_dev *wdev = wvif->wdev;
 	int i;
-	struct sk_buff_head *queue;
-	bool ret = true;
-
-	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
-		queue = &wdev->tx_queue[i].queue;
-		spin_lock_bh(&queue->lock);
-		if (!skb_queue_empty(queue))
-			ret = false;
-		spin_unlock_bh(&queue->lock);
-	}
-	return ret;
-}
 
-static bool hif_handle_tx_data(struct wfx_vif *wvif, struct sk_buff *skb,
-			       struct wfx_queue *queue)
-{
-	struct hif_req_tx *req = wfx_skb_txreq(skb);
-	struct ieee80211_key_conf *hw_key = wfx_skb_tx_priv(skb)->hw_key;
-	struct ieee80211_hdr *frame =
-		(struct ieee80211_hdr *)(req->frame + req->data_flags.fc_offset);
-
-	// FIXME: mac80211 is smart enough to handle BSS loss. Driver should not
-	// try to do anything about that.
-	if (ieee80211_is_nullfunc(frame->frame_control)) {
-		mutex_lock(&wvif->bss_loss_lock);
-		if (wvif->bss_loss_state) {
-			wvif->bss_loss_confirm_id = req->packet_id;
-			req->queue_id.queue_id = HIF_QUEUE_ID_VOICE;
-		}
-		mutex_unlock(&wvif->bss_loss_lock);
-	}
-
-	// FIXME: identify the exact scenario matched by this condition. Does it
-	// happen yet?
-	if (ieee80211_has_protected(frame->frame_control) &&
-	    hw_key && hw_key->keyidx != wvif->wep_default_key_id &&
-	    (hw_key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
-	     hw_key->cipher == WLAN_CIPHER_SUITE_WEP104)) {
-		wfx_tx_lock(wvif->wdev);
-		WARN_ON(wvif->wep_pending_skb);
-		wvif->wep_default_key_id = hw_key->keyidx;
-		wvif->wep_pending_skb = skb;
-		if (!schedule_work(&wvif->wep_key_work))
-			wfx_tx_unlock(wvif->wdev);
-		return true;
-	} else {
+	if (wvif->vif->type != NL80211_IFTYPE_AP)
 		return false;
-	}
-}
-
-static int wfx_get_prio_queue(struct wfx_vif *wvif,
-				 u32 tx_allowed_mask, int *total)
-{
-	static const int urgent = BIT(WFX_LINK_ID_AFTER_DTIM) |
-		BIT(WFX_LINK_ID_UAPSD);
-	const struct ieee80211_tx_queue_params *edca;
-	unsigned int score, best = -1;
-	int winner = -1;
-	int i;
-
-	/* search for a winner using edca params */
-	for (i = 0; i < IEEE80211_NUM_ACS; ++i) {
-		int queued;
-
-		edca = &wvif->edca_params[i];
-		queued = wfx_tx_queue_get_num_queued(&wvif->wdev->tx_queue[i],
-				tx_allowed_mask);
-		if (!queued)
-			continue;
-		*total += queued;
-		score = ((edca->aifs + edca->cw_min) << 16) +
-			((edca->cw_max - edca->cw_min) *
-			 (get_random_int() & 0xFFFF));
-		if (score < best && (winner < 0 || i != 3)) {
-			best = score;
-			winner = i;
-		}
-	}
-
-	/* override winner if bursting */
-	if (winner >= 0 && wvif->wdev->tx_burst_idx >= 0 &&
-	    winner != wvif->wdev->tx_burst_idx &&
-	    !wfx_tx_queue_get_num_queued(&wvif->wdev->tx_queue[winner],
-					 tx_allowed_mask & urgent) &&
-	    wfx_tx_queue_get_num_queued(&wvif->wdev->tx_queue[wvif->wdev->tx_burst_idx], tx_allowed_mask))
-		winner = wvif->wdev->tx_burst_idx;
-
-	return winner;
-}
-
-static int wfx_tx_queue_mask_get(struct wfx_vif *wvif,
-				     struct wfx_queue **queue_p,
-				     u32 *tx_allowed_mask_p)
-{
-	int idx;
-	u32 tx_allowed_mask;
-	int total = 0;
-
-	/* Search for unicast traffic */
-	tx_allowed_mask = ~wvif->sta_asleep_mask;
-	tx_allowed_mask |= BIT(WFX_LINK_ID_UAPSD);
-	if (wvif->sta_asleep_mask)
-		tx_allowed_mask &= ~BIT(WFX_LINK_ID_AFTER_DTIM);
-	else
-		tx_allowed_mask |= BIT(WFX_LINK_ID_AFTER_DTIM);
-	idx = wfx_get_prio_queue(wvif, tx_allowed_mask, &total);
-	if (idx < 0)
-		return -ENOENT;
-
-	*queue_p = &wvif->wdev->tx_queue[idx];
-	*tx_allowed_mask_p = tx_allowed_mask;
-	return 0;
+	for (i = 0; i < IEEE80211_NUM_ACS; ++i)
+		// Note: since only AP can have mcast frames in queue and only
+		// one vif can be AP, all queued frames has same interface id
+		if (!skb_queue_empty_lockless(&wdev->tx_queue[i].cab))
+			return true;
+	return false;
 }
 
-struct hif_msg *wfx_tx_queues_get_after_dtim(struct wfx_vif *wvif)
+static struct sk_buff *wfx_tx_queues_get_skb(struct wfx_dev *wdev)
 {
-	struct wfx_dev *wdev = wvif->wdev;
-	struct ieee80211_tx_info *tx_info;
+	struct wfx_queue *sorted_queues[IEEE80211_NUM_ACS];
+	struct wfx_vif *wvif;
 	struct hif_msg *hif;
 	struct sk_buff *skb;
-	int i;
+	int i, j;
 
-	for (i = 0; i < IEEE80211_NUM_ACS; ++i) {
-		skb_queue_walk(&wdev->tx_queue[i].queue, skb) {
-			tx_info = IEEE80211_SKB_CB(skb);
+	// bubble sort
+	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+		sorted_queues[i] = &wdev->tx_queue[i];
+		for (j = i; j > 0; j--)
+			if (atomic_read(&sorted_queues[j]->pending_frames) >
+			    atomic_read(&sorted_queues[j - 1]->pending_frames))
+				swap(sorted_queues[j - 1], sorted_queues[j]);
+	}
+	wvif = NULL;
+	while ((wvif = wvif_iterate(wdev, wvif)) != NULL) {
+		if (!wvif->after_dtim_tx_allowed)
+			continue;
+		for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+			skb = skb_dequeue(&sorted_queues[i]->cab);
+			if (!skb)
+				continue;
+			// Note: since only AP can have mcast frames in queue
+			// and only one vif can be AP, all queued frames has
+			// same interface id
 			hif = (struct hif_msg *)skb->data;
-			if ((tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) &&
-			    (hif->interface == wvif->id))
-				return (struct hif_msg *)skb->data;
+			WARN_ON(hif->interface != wvif->id);
+			WARN_ON(sorted_queues[i] !=
+				&wdev->tx_queue[skb_get_queue_mapping(skb)]);
+			atomic_inc(&sorted_queues[i]->pending_frames);
+			return skb;
+		}
+		// No more multicast to sent
+		wvif->after_dtim_tx_allowed = false;
+		schedule_work(&wvif->update_tim_work);
+	}
+	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+		skb = skb_dequeue(&sorted_queues[i]->normal);
+		if (skb) {
+			WARN_ON(sorted_queues[i] !=
+				&wdev->tx_queue[skb_get_queue_mapping(skb)]);
+			atomic_inc(&sorted_queues[i]->pending_frames);
+			return skb;
 		}
 	}
 	return NULL;
@@ -475,90 +306,20 @@ struct hif_msg *wfx_tx_queues_get_after_dtim(struct wfx_vif *wvif)
 
 struct hif_msg *wfx_tx_queues_get(struct wfx_dev *wdev)
 {
+	struct wfx_tx_priv *tx_priv;
 	struct sk_buff *skb;
-	struct hif_msg *hif = NULL;
-	struct wfx_queue *queue = NULL;
-	struct wfx_queue *vif_queue = NULL;
-	u32 tx_allowed_mask = 0;
-	u32 vif_tx_allowed_mask = 0;
-	struct wfx_vif *wvif;
-	int not_found;
-	int burst;
-	int i;
 
 	if (atomic_read(&wdev->tx_lock))
 		return NULL;
 
-	wvif = NULL;
-	while ((wvif = wvif_iterate(wdev, wvif)) != NULL) {
-		if (wvif->after_dtim_tx_allowed) {
-			for (i = 0; i < IEEE80211_NUM_ACS; ++i) {
-				skb = wfx_tx_queue_get(wvif->wdev,
-						       &wdev->tx_queue[i],
-						       BIT(WFX_LINK_ID_AFTER_DTIM));
-				if (skb) {
-					hif = (struct hif_msg *)skb->data;
-					// Cannot happen since only one vif can
-					// be AP at time
-					WARN_ON(wvif->id != hif->interface);
-					return hif;
-				}
-			}
-			// No more multicast to sent
-			wvif->after_dtim_tx_allowed = false;
-			schedule_work(&wvif->update_tim_work);
-		}
-	}
-
 	for (;;) {
-		int ret = -ENOENT;
-		int queue_num;
-
-		wvif = NULL;
-		while ((wvif = wvif_iterate(wdev, wvif)) != NULL) {
-			spin_lock_bh(&wvif->ps_state_lock);
-
-			not_found = wfx_tx_queue_mask_get(wvif, &vif_queue,
-							  &vif_tx_allowed_mask);
-
-			spin_unlock_bh(&wvif->ps_state_lock);
-
-			if (!not_found) {
-				if (queue && queue != vif_queue)
-					dev_info(wdev->dev, "vifs disagree about queue priority\n");
-				tx_allowed_mask |= vif_tx_allowed_mask;
-				queue = vif_queue;
-				ret = 0;
-			}
-		}
-
-		if (ret)
-			return NULL;
-
-		queue_num = queue - wdev->tx_queue;
-
-		skb = wfx_tx_queue_get(wdev, queue, tx_allowed_mask);
+		skb = wfx_tx_queues_get_skb(wdev);
 		if (!skb)
-			continue;
-		hif = (struct hif_msg *)skb->data;
-		wvif = wdev_to_wvif(wdev, hif->interface);
-		WARN_ON(!wvif);
-
-		if (hif_handle_tx_data(wvif, skb, queue))
-			continue;  /* Handled by WSM */
-
-		/* allow bursting if txop is set */
-		if (wvif->edca_params[queue_num].txop)
-			burst = wfx_tx_queue_get_num_queued(queue, tx_allowed_mask) + 1;
-		else
-			burst = 1;
-
-		/* store index of bursting queue */
-		if (burst > 1)
-			wdev->tx_burst_idx = queue_num;
-		else
-			wdev->tx_burst_idx = -1;
-
-		return hif;
+			return NULL;
+		skb_queue_tail(&wdev->tx_pending, skb);
+		wake_up(&wdev->tx_dequeue);
+		tx_priv = wfx_skb_tx_priv(skb);
+		tx_priv->xmit_timestamp = ktime_get();
+		return (struct hif_msg *)skb->data;
 	}
 }
diff --git a/drivers/staging/wfx/queue.h b/drivers/staging/wfx/queue.h
index 90bb060d1204..1020dfde399b 100644
--- a/drivers/staging/wfx/queue.h
+++ b/drivers/staging/wfx/queue.h
@@ -9,29 +9,17 @@
 #define WFX_QUEUE_H
 
 #include <linux/skbuff.h>
+#include <linux/atomic.h>
 
 #include "hif_api_cmd.h"
 
-#define WFX_MAX_STA_IN_AP_MODE    14
-#define WFX_LINK_ID_NO_ASSOC      15
-#define WFX_LINK_ID_AFTER_DTIM    (WFX_LINK_ID_NO_ASSOC + 1)
-#define WFX_LINK_ID_UAPSD         (WFX_LINK_ID_NO_ASSOC + 2)
-#define WFX_LINK_ID_MAX           (WFX_LINK_ID_NO_ASSOC + 3)
-
 struct wfx_dev;
 struct wfx_vif;
 
 struct wfx_queue {
-	struct sk_buff_head	queue;
-	int			tx_locked_cnt;
-	int			link_map_cache[WFX_LINK_ID_MAX];
-	u8			queue_id;
-};
-
-struct wfx_queue_stats {
-	int			link_map_cache[WFX_LINK_ID_MAX];
-	struct sk_buff_head	pending;
-	wait_queue_head_t	wait_link_id_empty;
+	struct sk_buff_head	normal;
+	struct sk_buff_head	cab; // Content After (DTIM) Beacon
+	atomic_t		pending_frames;
 };
 
 void wfx_tx_lock(struct wfx_dev *wdev);
@@ -40,21 +28,18 @@ void wfx_tx_flush(struct wfx_dev *wdev);
 void wfx_tx_lock_flush(struct wfx_dev *wdev);
 
 void wfx_tx_queues_init(struct wfx_dev *wdev);
-void wfx_tx_queues_deinit(struct wfx_dev *wdev);
-void wfx_tx_queues_lock(struct wfx_dev *wdev);
-void wfx_tx_queues_unlock(struct wfx_dev *wdev);
-void wfx_tx_queues_clear(struct wfx_dev *wdev);
-bool wfx_tx_queues_is_empty(struct wfx_dev *wdev);
-void wfx_tx_queues_wait_empty_vif(struct wfx_vif *wvif);
+void wfx_tx_queues_check_empty(struct wfx_dev *wdev);
+bool wfx_tx_queues_has_cab(struct wfx_vif *wvif);
+void wfx_tx_queues_put(struct wfx_dev *wdev, struct sk_buff *skb);
 struct hif_msg *wfx_tx_queues_get(struct wfx_dev *wdev);
-struct hif_msg *wfx_tx_queues_get_after_dtim(struct wfx_vif *wvif);
 
-void wfx_tx_queue_put(struct wfx_dev *wdev, struct wfx_queue *queue,
-		      struct sk_buff *skb);
-int wfx_tx_queue_get_num_queued(struct wfx_queue *queue, u32 link_id_map);
+bool wfx_tx_queue_empty(struct wfx_dev *wdev, struct wfx_queue *queue,
+			int vif_id);
+void wfx_tx_queue_drop(struct wfx_dev *wdev, struct wfx_queue *queue,
+		       int vif_id, struct sk_buff_head *dropped);
 
 struct sk_buff *wfx_pending_get(struct wfx_dev *wdev, u32 packet_id);
-int wfx_pending_remove(struct wfx_dev *wdev, struct sk_buff *skb);
+void wfx_pending_drop(struct wfx_dev *wdev, struct sk_buff_head *dropped);
 int wfx_pending_requeue(struct wfx_dev *wdev, struct sk_buff *skb);
 unsigned int wfx_pending_get_pkt_us_delay(struct wfx_dev *wdev,
 					  struct sk_buff *skb);
diff --git a/drivers/staging/wfx/scan.c b/drivers/staging/wfx/scan.c
index 6e1e50048651..76761e4960dd 100644
--- a/drivers/staging/wfx/scan.c
+++ b/drivers/staging/wfx/scan.c
@@ -86,18 +86,17 @@ void wfx_hw_scan_work(struct work_struct *work)
 	struct ieee80211_scan_request *hw_req = wvif->scan_req;
 	int chan_cur, ret;
 
-	mutex_lock(&wvif->scan_lock);
 	mutex_lock(&wvif->wdev->conf_mutex);
+	mutex_lock(&wvif->scan_lock);
 	update_probe_tmpl(wvif, &hw_req->req);
-	wfx_fwd_probe_req(wvif, true);
 	chan_cur = 0;
 	do {
 		ret = send_scan_req(wvif, &hw_req->req, chan_cur);
 		if (ret > 0)
 			chan_cur += ret;
 	} while (ret > 0 && chan_cur < hw_req->req.n_channels);
-	mutex_unlock(&wvif->wdev->conf_mutex);
 	mutex_unlock(&wvif->scan_lock);
+	mutex_unlock(&wvif->wdev->conf_mutex);
 	__ieee80211_scan_completed_compat(wvif->wdev->hw, ret < 0);
 }
 
@@ -111,9 +110,6 @@ int wfx_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	if (vif->type == NL80211_IFTYPE_AP)
 		return -EOPNOTSUPP;
 
-	if (wvif->state == WFX_STATE_PRE_STA)
-		return -EBUSY;
-
 	wvif->scan_req = hw_req;
 	schedule_work(&wvif->scan_work);
 	return 0;
diff --git a/drivers/staging/wfx/sta.c b/drivers/staging/wfx/sta.c
index 9d430346a58b..74ec0b604085 100644
--- a/drivers/staging/wfx/sta.c
+++ b/drivers/staging/wfx/sta.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
  * Copyright (c) 2010, ST-Ericsson
  */
+#include <linux/etherdevice.h>
 #include <net/mac80211.h>
 
 #include "sta.h"
@@ -37,117 +38,32 @@ u32 wfx_rate_mask_to_hw(struct wfx_dev *wdev, u32 rates)
 	return ret;
 }
 
-static void __wfx_free_event_queue(struct list_head *list)
+void wfx_cooling_timeout_work(struct work_struct *work)
 {
-	struct wfx_hif_event *event, *tmp;
+	struct wfx_dev *wdev = container_of(to_delayed_work(work),
+					    struct wfx_dev,
+					    cooling_timeout_work);
 
-	list_for_each_entry_safe(event, tmp, list, link) {
-		list_del(&event->link);
-		kfree(event);
-	}
-}
-
-static void wfx_free_event_queue(struct wfx_vif *wvif)
-{
-	LIST_HEAD(list);
-
-	spin_lock(&wvif->event_queue_lock);
-	list_splice_init(&wvif->event_queue, &list);
-	spin_unlock(&wvif->event_queue_lock);
-
-	__wfx_free_event_queue(&list);
+	wdev->chip_frozen = true;
+	wfx_tx_unlock(wdev);
 }
 
-void wfx_cqm_bssloss_sm(struct wfx_vif *wvif, int init, int good, int bad)
+void wfx_suspend_hot_dev(struct wfx_dev *wdev, enum sta_notify_cmd cmd)
 {
-	int tx = 0;
-
-	mutex_lock(&wvif->bss_loss_lock);
-	cancel_work_sync(&wvif->bss_params_work);
-
-	if (init) {
-		schedule_delayed_work(&wvif->bss_loss_work, HZ);
-		wvif->bss_loss_state = 0;
-
-		if (!atomic_read(&wvif->wdev->tx_lock))
-			tx = 1;
-	} else if (good) {
-		cancel_delayed_work_sync(&wvif->bss_loss_work);
-		wvif->bss_loss_state = 0;
-		schedule_work(&wvif->bss_params_work);
-	} else if (bad) {
-		/* FIXME Should we just keep going until we time out? */
-		if (wvif->bss_loss_state < 3)
-			tx = 1;
+	if (cmd == STA_NOTIFY_AWAKE) {
+		// Device recover normal temperature
+		if (cancel_delayed_work(&wdev->cooling_timeout_work))
+			wfx_tx_unlock(wdev);
 	} else {
-		cancel_delayed_work_sync(&wvif->bss_loss_work);
-		wvif->bss_loss_state = 0;
-	}
-
-	/* Spit out a NULL packet to our AP if necessary */
-	// FIXME: call ieee80211_beacon_loss/ieee80211_connection_loss instead
-	if (tx) {
-		struct sk_buff *skb;
-		struct ieee80211_hdr *hdr;
-		struct ieee80211_tx_control control = { };
-
-		wvif->bss_loss_state++;
-
-		skb = ieee80211_nullfunc_get(wvif->wdev->hw, wvif->vif, false);
-		if (!skb)
-			goto end;
-		hdr = (struct ieee80211_hdr *)skb->data;
-		memset(IEEE80211_SKB_CB(skb), 0,
-		       sizeof(*IEEE80211_SKB_CB(skb)));
-		IEEE80211_SKB_CB(skb)->control.vif = wvif->vif;
-		IEEE80211_SKB_CB(skb)->driver_rates[0].idx = 0;
-		IEEE80211_SKB_CB(skb)->driver_rates[0].count = 1;
-		IEEE80211_SKB_CB(skb)->driver_rates[1].idx = -1;
-		rcu_read_lock(); // protect control.sta
-		control.sta = ieee80211_find_sta(wvif->vif, hdr->addr1);
-		wfx_tx(wvif->wdev->hw, &control, skb);
-		rcu_read_unlock();
+		// Device is too hot
+		schedule_delayed_work(&wdev->cooling_timeout_work, 10 * HZ);
+		wfx_tx_lock(wdev);
 	}
-end:
-	mutex_unlock(&wvif->bss_loss_lock);
-}
-
-int wfx_fwd_probe_req(struct wfx_vif *wvif, bool enable)
-{
-	wvif->fwd_probe_req = enable;
-	return hif_set_rx_filter(wvif, wvif->filter_bssid,
-				 wvif->fwd_probe_req);
-}
-
-static int wfx_set_mcast_filter(struct wfx_vif *wvif,
-				    struct wfx_grp_addr_table *fp)
-{
-	int i;
-
-	// Temporary workaround for filters
-	return hif_set_data_filtering(wvif, false, true);
-
-	if (!fp->enable)
-		return hif_set_data_filtering(wvif, false, true);
-
-	for (i = 0; i < fp->num_addresses; i++)
-		hif_set_mac_addr_condition(wvif, i, fp->address_list[i]);
-	hif_set_uc_mc_bc_condition(wvif, 0,
-				   HIF_FILTER_UNICAST | HIF_FILTER_BROADCAST);
-	hif_set_config_data_filter(wvif, true, 0, BIT(1),
-				   BIT(fp->num_addresses) - 1);
-	hif_set_data_filtering(wvif, true, true);
-
-	return 0;
 }
 
-void wfx_update_filtering(struct wfx_vif *wvif)
+static void wfx_filter_beacon(struct wfx_vif *wvif, bool filter_beacon)
 {
-	int ret;
-	int bf_enable;
-	int bf_count;
-	int n_filter_ies;
-	struct hif_ie_table_entry filter_ies[] = {
+	const struct hif_ie_table_entry filter_ies[] = {
 		{
 			.ie_id        = WLAN_EID_VENDOR_SPECIFIC,
 			.has_changed  = 1,
@@ -167,40 +83,34 @@ void wfx_update_filtering(struct wfx_vif *wvif)
 		}
 	};
 
-	if (wvif->state == WFX_STATE_PASSIVE)
-		return;
-
-	if (wvif->disable_beacon_filter) {
-		bf_enable = 0;
-		bf_count = 1;
-		n_filter_ies = 0;
-	} else if (wvif->vif->type != NL80211_IFTYPE_STATION) {
-		bf_enable = HIF_BEACON_FILTER_ENABLE | HIF_BEACON_FILTER_AUTO_ERP;
-		bf_count = 0;
-		n_filter_ies = 2;
+	if (!filter_beacon) {
+		hif_set_beacon_filter_table(wvif, 0, NULL);
+		hif_beacon_filter_control(wvif, 0, 1);
 	} else {
-		bf_enable = HIF_BEACON_FILTER_ENABLE;
-		bf_count = 0;
-		n_filter_ies = 3;
+		hif_set_beacon_filter_table(wvif, 3, filter_ies);
+		hif_beacon_filter_control(wvif, HIF_BEACON_FILTER_ENABLE, 0);
 	}
-
-	ret = hif_set_rx_filter(wvif, wvif->filter_bssid, wvif->fwd_probe_req);
-	if (!ret)
-		ret = hif_set_beacon_filter_table(wvif, n_filter_ies, filter_ies);
-	if (!ret)
-		ret = hif_beacon_filter_control(wvif, bf_enable, bf_count);
-	if (!ret)
-		ret = wfx_set_mcast_filter(wvif, &wvif->mcast_filter);
-	if (ret)
-		dev_err(wvif->wdev->dev, "update filtering failed: %d\n", ret);
 }
 
-static void wfx_update_filtering_work(struct work_struct *work)
+static void wfx_filter_mcast(struct wfx_vif *wvif, bool filter_mcast)
 {
-	struct wfx_vif *wvif = container_of(work, struct wfx_vif,
-					    update_filtering_work);
+	int i;
 
-	wfx_update_filtering(wvif);
+	// Temporary workaround for filters
+	hif_set_data_filtering(wvif, false, true);
+	return;
+
+	if (!filter_mcast) {
+		hif_set_data_filtering(wvif, false, true);
+		return;
+	}
+	for (i = 0; i < wvif->filter_mcast_count; i++)
+		hif_set_mac_addr_condition(wvif, i, wvif->filter_mcast_addr[i]);
+	hif_set_uc_mc_bc_condition(wvif, 0,
+				   HIF_FILTER_UNICAST | HIF_FILTER_BROADCAST);
+	hif_set_config_data_filter(wvif, true, 0, BIT(1),
+				   BIT(wvif->filter_mcast_count) - 1);
+	hif_set_data_filtering(wvif, true, true);
 }
 
 u64 wfx_prepare_multicast(struct ieee80211_hw *hw,
@@ -213,19 +123,17 @@ u64 wfx_prepare_multicast(struct ieee80211_hw *hw,
 	int count = netdev_hw_addr_list_count(mc_list);
 
 	while ((wvif = wvif_iterate(wdev, wvif)) != NULL) {
-		memset(&wvif->mcast_filter, 0x00, sizeof(wvif->mcast_filter));
-		if (!count ||
-		    count > ARRAY_SIZE(wvif->mcast_filter.address_list))
+		if (count > ARRAY_SIZE(wvif->filter_mcast_addr)) {
+			wvif->filter_mcast_count = 0;
 			continue;
+		}
+		wvif->filter_mcast_count = count;
 
 		i = 0;
 		netdev_hw_addr_list_for_each(ha, mc_list) {
-			ether_addr_copy(wvif->mcast_filter.address_list[i],
-					ha->addr);
+			ether_addr_copy(wvif->filter_mcast_addr[i], ha->addr);
 			i++;
 		}
-		wvif->mcast_filter.enable = true;
-		wvif->mcast_filter.num_addresses = count;
 	}
 
 	return 0;
@@ -238,18 +146,61 @@ void wfx_configure_filter(struct ieee80211_hw *hw,
 {
 	struct wfx_vif *wvif = NULL;
 	struct wfx_dev *wdev = hw->priv;
+	bool filter_bssid, filter_prbreq, filter_beacon, filter_mcast;
+
+	// Notes:
+	//   - Probe responses (FIF_BCN_PRBRESP_PROMISC) are never filtered
+	//   - PS-Poll (FIF_PSPOLL) are never filtered
+	//   - RTS, CTS and Ack (FIF_CONTROL) are always filtered
+	//   - Broken frames (FIF_FCSFAIL and FIF_PLCPFAIL) are always filtered
+	//   - Firmware does (yet) allow to forward unicast traffic sent to
+	//     other stations (aka. promiscuous mode)
+	*total_flags &= FIF_BCN_PRBRESP_PROMISC | FIF_ALLMULTI | FIF_OTHER_BSS |
+			FIF_PROBE_REQ | FIF_PSPOLL;
 
-	*total_flags &= FIF_OTHER_BSS | FIF_FCSFAIL | FIF_PROBE_REQ;
-
+	mutex_lock(&wdev->conf_mutex);
 	while ((wvif = wvif_iterate(wdev, wvif)) != NULL) {
 		mutex_lock(&wvif->scan_lock);
-		wvif->filter_bssid = (*total_flags &
-				      (FIF_OTHER_BSS | FIF_PROBE_REQ)) ? 0 : 1;
-		wvif->disable_beacon_filter = !(*total_flags & FIF_PROBE_REQ);
-		wfx_fwd_probe_req(wvif, true);
-		wfx_update_filtering(wvif);
+
+		// Note: FIF_BCN_PRBRESP_PROMISC covers probe response and
+		// beacons from other BSS
+		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
+			filter_beacon = false;
+		else
+			filter_beacon = true;
+		wfx_filter_beacon(wvif, filter_beacon);
+
+		if (*total_flags & FIF_ALLMULTI) {
+			filter_mcast = false;
+		} else if (!wvif->filter_mcast_count) {
+			dev_dbg(wdev->dev, "disabling unconfigured multicast filter");
+			filter_mcast = false;
+		} else {
+			filter_mcast = true;
+		}
+		wfx_filter_mcast(wvif, filter_mcast);
+
+		if (*total_flags & FIF_OTHER_BSS)
+			filter_bssid = false;
+		else
+			filter_bssid = true;
+
+		// In AP mode, chip can reply to probe request itself
+		if (*total_flags & FIF_PROBE_REQ &&
+		    wvif->vif->type == NL80211_IFTYPE_AP) {
+			dev_dbg(wdev->dev, "do not forward probe request in AP mode\n");
+			*total_flags &= ~FIF_PROBE_REQ;
+		}
+
+		if (*total_flags & FIF_PROBE_REQ)
+			filter_prbreq = false;
+		else
+			filter_prbreq = true;
+		hif_set_rx_filter(wvif, filter_bssid, filter_prbreq);
+
 		mutex_unlock(&wvif->scan_lock);
 	}
+	mutex_unlock(&wdev->conf_mutex);
 }
 
 static int wfx_update_pm(struct wfx_vif *wvif)
@@ -260,7 +211,7 @@ static int wfx_update_pm(struct wfx_vif *wvif)
 	struct ieee80211_channel *chan0 = NULL, *chan1 = NULL;
 
 	WARN_ON(conf->dynamic_ps_timeout < 0);
-	if (wvif->state != WFX_STATE_STA || !wvif->bss_params.aid)
+	if (!wvif->vif->bss_conf.assoc)
 		return 0;
 	if (!ps)
 		ps_timeout = 0;
@@ -277,7 +228,10 @@ static int wfx_update_pm(struct wfx_vif *wvif)
 	if (chan0 && chan1 && chan0->hw_value != chan1->hw_value &&
 	    wvif->vif->type != NL80211_IFTYPE_AP) {
 		ps = true;
-		ps_timeout = 0;
+		if (wvif->bss_not_support_ps_poll)
+			ps_timeout = 30;
+		else
+			ps_timeout = 0;
 	}
 
 	if (!wait_for_completion_timeout(&wvif->set_pm_mode_complete,
@@ -287,6 +241,14 @@ static int wfx_update_pm(struct wfx_vif *wvif)
 	return hif_set_pm(wvif, ps, ps_timeout);
 }
 
+static void wfx_update_pm_work(struct work_struct *work)
+{
+	struct wfx_vif *wvif = container_of(work, struct wfx_vif,
+					    update_pm_work);
+
+	wfx_update_pm(wvif);
+}
+
 int wfx_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		   u16 queue, const struct ieee80211_tx_queue_params *params)
 {
@@ -298,7 +260,6 @@ int wfx_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 
 	mutex_lock(&wdev->conf_mutex);
 	assign_bit(queue, &wvif->uapsd_mask, params->uapsd);
-	memcpy(&wvif->edca_params[queue], params, sizeof(*params));
 	hif_set_edca_queue_params(wvif, queue, params);
 	if (wvif->vif->type == NL80211_IFTYPE_STATION &&
 	    old_uapsd != wvif->uapsd_mask) {
@@ -319,32 +280,9 @@ int wfx_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 	return 0;
 }
 
-static int __wfx_flush(struct wfx_dev *wdev, bool drop)
-{
-	for (;;) {
-		if (drop)
-			wfx_tx_queues_clear(wdev);
-		if (wait_event_timeout(wdev->tx_queue_stats.wait_link_id_empty,
-				       wfx_tx_queues_is_empty(wdev),
-				       2 * HZ) <= 0)
-			return -ETIMEDOUT;
-		wfx_tx_flush(wdev);
-		if (wfx_tx_queues_is_empty(wdev))
-			return 0;
-		dev_warn(wdev->dev, "frames queued while flushing tx queues");
-	}
-}
-
-void wfx_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-		  u32 queues, bool drop)
-{
-	// FIXME: only flush requested vif and queues
-	__wfx_flush(hw->priv, drop);
-}
-
 /* WSM callbacks */
 
-static void wfx_event_report_rssi(struct wfx_vif *wvif, u8 raw_rcpi_rssi)
+void wfx_event_report_rssi(struct wfx_vif *wvif, u8 raw_rcpi_rssi)
 {
 	/* RSSI: signed Q8.0, RCPI: unsigned Q7.1
 	 * RSSI = RCPI / 2 - 110
@@ -360,100 +298,37 @@ static void wfx_event_report_rssi(struct wfx_vif *wvif, u8 raw_rcpi_rssi)
 	ieee80211_cqm_rssi_notify(wvif->vif, cqm_evt, rcpi_rssi, GFP_KERNEL);
 }
 
-static void wfx_event_handler_work(struct work_struct *work)
+static void wfx_beacon_loss_work(struct work_struct *work)
 {
-	struct wfx_vif *wvif =
-		container_of(work, struct wfx_vif, event_handler_work);
-	struct wfx_hif_event *event;
-
-	LIST_HEAD(list);
-
-	spin_lock(&wvif->event_queue_lock);
-	list_splice_init(&wvif->event_queue, &list);
-	spin_unlock(&wvif->event_queue_lock);
-
-	list_for_each_entry(event, &list, link) {
-		switch (event->evt.event_id) {
-		case HIF_EVENT_IND_BSSLOST:
-			cancel_work_sync(&wvif->unjoin_work);
-			mutex_lock(&wvif->scan_lock);
-			wfx_cqm_bssloss_sm(wvif, 1, 0, 0);
-			mutex_unlock(&wvif->scan_lock);
-			break;
-		case HIF_EVENT_IND_BSSREGAINED:
-			wfx_cqm_bssloss_sm(wvif, 0, 0, 0);
-			cancel_work_sync(&wvif->unjoin_work);
-			break;
-		case HIF_EVENT_IND_RCPI_RSSI:
-			wfx_event_report_rssi(wvif,
-					      event->evt.event_data.rcpi_rssi);
-			break;
-		case HIF_EVENT_IND_PS_MODE_ERROR:
-			dev_warn(wvif->wdev->dev,
-				 "error while processing power save request\n");
-			break;
-		default:
-			dev_warn(wvif->wdev->dev,
-				 "unhandled event indication: %.2x\n",
-				 event->evt.event_id);
-			break;
-		}
-	}
-	__wfx_free_event_queue(&list);
-}
-
-static void wfx_bss_loss_work(struct work_struct *work)
-{
-	struct wfx_vif *wvif = container_of(work, struct wfx_vif,
-					    bss_loss_work.work);
+	struct wfx_vif *wvif = container_of(to_delayed_work(work),
+					    struct wfx_vif, beacon_loss_work);
+	struct ieee80211_bss_conf *bss_conf = &wvif->vif->bss_conf;
 
-	ieee80211_connection_loss(wvif->vif);
+	ieee80211_beacon_loss(wvif->vif);
+	schedule_delayed_work(to_delayed_work(work),
+			      msecs_to_jiffies(bss_conf->beacon_int));
 }
 
-static void wfx_bss_params_work(struct work_struct *work)
+void wfx_set_default_unicast_key(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif, int idx)
 {
-	struct wfx_vif *wvif = container_of(work, struct wfx_vif,
-					    bss_params_work);
+	struct wfx_vif *wvif = (struct wfx_vif *)vif->drv_priv;
 
-	mutex_lock(&wvif->wdev->conf_mutex);
-	wvif->bss_params.bss_flags.lost_count_only = 1;
-	hif_set_bss_params(wvif, &wvif->bss_params);
-	wvif->bss_params.bss_flags.lost_count_only = 0;
-	mutex_unlock(&wvif->wdev->conf_mutex);
+	hif_wep_default_key_id(wvif, idx);
 }
 
+// Call it with wdev->conf_mutex locked
 static void wfx_do_unjoin(struct wfx_vif *wvif)
 {
-	mutex_lock(&wvif->wdev->conf_mutex);
-
-	if (!wvif->state)
-		goto done;
-
-	if (wvif->state == WFX_STATE_AP)
-		goto done;
-
-	cancel_work_sync(&wvif->update_filtering_work);
-	wvif->state = WFX_STATE_PASSIVE;
-
 	/* Unjoin is a reset. */
-	wfx_tx_flush(wvif->wdev);
-	hif_keep_alive_period(wvif, 0);
+	wfx_tx_lock_flush(wvif->wdev);
 	hif_reset(wvif, false);
 	wfx_tx_policy_init(wvif);
-	hif_set_macaddr(wvif, wvif->vif->addr);
-	wfx_free_event_queue(wvif);
-	cancel_work_sync(&wvif->event_handler_work);
-	wfx_cqm_bssloss_sm(wvif, 0, 0, 0);
-
-	/* Disable Block ACKs */
-	hif_set_block_ack_policy(wvif, 0, 0);
-
-	wvif->disable_beacon_filter = false;
-	wfx_update_filtering(wvif);
-	memset(&wvif->bss_params, 0, sizeof(wvif->bss_params));
-
-done:
-	mutex_unlock(&wvif->wdev->conf_mutex);
+	if (wvif_count(wvif->wdev) <= 1)
+		hif_set_block_ack_policy(wvif, 0xFF, 0xFF);
+	wfx_tx_unlock(wvif->wdev);
+	wvif->bss_not_support_ps_poll = false;
+	cancel_delayed_work_sync(&wvif->beacon_loss_work);
 }
 
 static void wfx_set_mfp(struct wfx_vif *wvif,
@@ -498,9 +373,6 @@ static void wfx_do_join(struct wfx_vif *wvif)
 
 	wfx_tx_lock_flush(wvif->wdev);
 
-	if (wvif->state)
-		wfx_do_unjoin(wvif);
-
 	bss = cfg80211_get_bss(wvif->wdev->hw->wiphy, wvif->channel,
 			       conf->bssid, NULL, 0,
 			       IEEE80211_BSS_TYPE_ANY, IEEE80211_PRIVACY_ANY);
@@ -509,66 +381,32 @@ static void wfx_do_join(struct wfx_vif *wvif)
 		return;
 	}
 
-	mutex_lock(&wvif->wdev->conf_mutex);
-
-	/* Sanity check beacon interval */
-	if (!wvif->beacon_int)
-		wvif->beacon_int = 1;
-
 	rcu_read_lock(); // protect ssidie
-	if (!conf->ibss_joined)
+	if (bss)
 		ssidie = ieee80211_bss_get_ie(bss, WLAN_EID_SSID);
 	if (ssidie) {
 		ssidlen = ssidie[1];
-		memcpy(ssid, &ssidie[2], ssidie[1]);
+		if (ssidlen > IEEE80211_MAX_SSID_LEN)
+			ssidlen = IEEE80211_MAX_SSID_LEN;
+		memcpy(ssid, &ssidie[2], ssidlen);
 	}
 	rcu_read_unlock();
 
-	wfx_tx_flush(wvif->wdev);
-
-	if (wvif_count(wvif->wdev) <= 1)
-		hif_set_block_ack_policy(wvif, 0xFF, 0xFF);
-
 	wfx_set_mfp(wvif, bss);
+	cfg80211_put_bss(wvif->wdev->hw->wiphy, bss);
 
-	wvif->wdev->tx_burst_idx = -1;
 	ret = hif_join(wvif, conf, wvif->channel, ssid, ssidlen);
 	if (ret) {
 		ieee80211_connection_loss(wvif->vif);
-		wvif->join_complete_status = -1;
-		/* Tx lock still held, unjoin will clear it. */
-		if (!schedule_work(&wvif->unjoin_work))
-			wfx_tx_unlock(wvif->wdev);
+		wfx_do_unjoin(wvif);
 	} else {
-		wvif->join_complete_status = 0;
-		if (wvif->vif->type == NL80211_IFTYPE_ADHOC)
-			wvif->state = WFX_STATE_IBSS;
-		else
-			wvif->state = WFX_STATE_PRE_STA;
-		wfx_tx_unlock(wvif->wdev);
-
-		/* Upload keys */
-		wfx_upload_keys(wvif);
-
 		/* Due to beacon filtering it is possible that the
 		 * AP's beacon is not known for the mac80211 stack.
 		 * Disable filtering temporary to make sure the stack
 		 * receives at least one
 		 */
-		wvif->disable_beacon_filter = true;
+		wfx_filter_beacon(wvif, false);
 	}
-	wfx_update_filtering(wvif);
-
-	mutex_unlock(&wvif->wdev->conf_mutex);
-	if (bss)
-		cfg80211_put_bss(wvif->wdev->hw->wiphy, bss);
-}
-
-static void wfx_unjoin_work(struct work_struct *work)
-{
-	struct wfx_vif *wvif = container_of(work, struct wfx_vif, unjoin_work);
-
-	wfx_do_unjoin(wvif);
 	wfx_tx_unlock(wvif->wdev);
 }
 
@@ -581,21 +419,15 @@ int wfx_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	spin_lock_init(&sta_priv->lock);
 	sta_priv->vif_id = wvif->id;
 
-	// FIXME: in station mode, the current API interprets new link-id as a
-	// tdls peer.
-	if (vif->type == NL80211_IFTYPE_STATION)
+	// In station mode, the firmware interprets new link-id as a TDLS peer.
+	if (vif->type == NL80211_IFTYPE_STATION && !sta->tdls)
 		return 0;
 	sta_priv->link_id = ffz(wvif->link_id_map);
 	wvif->link_id_map |= BIT(sta_priv->link_id);
 	WARN_ON(!sta_priv->link_id);
-	WARN_ON(sta_priv->link_id >= WFX_MAX_STA_IN_AP_MODE);
+	WARN_ON(sta_priv->link_id >= HIF_LINK_ID_MAX);
 	hif_map_link(wvif, sta->addr, 0, sta_priv->link_id);
 
-	spin_lock_bh(&wvif->ps_state_lock);
-	if ((sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK) ==
-					IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK)
-		wvif->sta_asleep_mask |= BIT(sta_priv->link_id);
-	spin_unlock_bh(&wvif->ps_state_lock);
 	return 0;
 }
 
@@ -610,8 +442,8 @@ int wfx_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		if (sta_priv->buffered[i])
 			dev_warn(wvif->wdev->dev, "release station while %d pending frame on queue %d",
 				 sta_priv->buffered[i], i);
-	// FIXME: see note in wfx_sta_add()
-	if (vif->type == NL80211_IFTYPE_STATION)
+	// See note in wfx_sta_add()
+	if (!sta_priv->link_id)
 		return 0;
 	// FIXME add a mutex?
 	hif_map_link(wvif, sta->addr, 1, sta_priv->link_id);
@@ -619,50 +451,10 @@ int wfx_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	return 0;
 }
 
-static int wfx_start_ap(struct wfx_vif *wvif)
-{
-	int ret;
-
-	wvif->beacon_int = wvif->vif->bss_conf.beacon_int;
-	wvif->wdev->tx_burst_idx = -1;
-	ret = hif_start(wvif, &wvif->vif->bss_conf, wvif->channel);
-	if (ret)
-		return ret;
-	ret = wfx_upload_keys(wvif);
-	if (ret)
-		return ret;
-	if (wvif_count(wvif->wdev) <= 1)
-		hif_set_block_ack_policy(wvif, 0xFF, 0xFF);
-	wvif->state = WFX_STATE_AP;
-	wfx_update_filtering(wvif);
-	return 0;
-}
-
-static int wfx_update_beaconing(struct wfx_vif *wvif)
-{
-	if (wvif->vif->type != NL80211_IFTYPE_AP)
-		return 0;
-	if (wvif->state == WFX_STATE_AP &&
-	    wvif->beacon_int == wvif->vif->bss_conf.beacon_int)
-		return 0;
-	wfx_tx_lock_flush(wvif->wdev);
-	hif_reset(wvif, false);
-	wfx_tx_policy_init(wvif);
-	wvif->state = WFX_STATE_PASSIVE;
-	wfx_start_ap(wvif);
-	wfx_tx_unlock(wvif->wdev);
-	return 0;
-}
-
 static int wfx_upload_ap_templates(struct wfx_vif *wvif)
 {
 	struct sk_buff *skb;
 
-	if (wvif->vif->type == NL80211_IFTYPE_STATION ||
-	    wvif->vif->type == NL80211_IFTYPE_MONITOR ||
-	    wvif->vif->type == NL80211_IFTYPE_UNSPECIFIED)
-		return 0;
-
 	skb = ieee80211_beacon_get(wvif->wdev->hw, wvif->vif);
 	if (!skb)
 		return -ENOMEM;
@@ -679,42 +471,65 @@ static int wfx_upload_ap_templates(struct wfx_vif *wvif)
 	return 0;
 }
 
+int wfx_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	struct wfx_vif *wvif = (struct wfx_vif *)vif->drv_priv;
+
+	wfx_upload_ap_templates(wvif);
+	hif_start(wvif, &vif->bss_conf, wvif->channel);
+	return 0;
+}
+
+void wfx_stop_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	struct wfx_vif *wvif = (struct wfx_vif *)vif->drv_priv;
+
+	hif_reset(wvif, false);
+	wfx_tx_policy_init(wvif);
+	if (wvif_count(wvif->wdev) <= 1)
+		hif_set_block_ack_policy(wvif, 0xFF, 0xFF);
+	wvif->bss_not_support_ps_poll = false;
+}
+
 static void wfx_join_finalize(struct wfx_vif *wvif,
 			      struct ieee80211_bss_conf *info)
 {
-	struct ieee80211_sta *sta = NULL;
-
-	wvif->beacon_int = info->beacon_int;
-	rcu_read_lock(); // protect sta
-	if (info->bssid && !info->ibss_joined)
-		sta = ieee80211_find_sta(wvif->vif, info->bssid);
-	if (sta)
-		wvif->bss_params.operational_rate_set =
-			wfx_rate_mask_to_hw(wvif->wdev, sta->supp_rates[wvif->channel->band]);
-	else
-		wvif->bss_params.operational_rate_set = -1;
-	rcu_read_unlock();
-	if (sta &&
-	    info->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT)
-		hif_dual_cts_protection(wvif, true);
-	else
-		hif_dual_cts_protection(wvif, false);
+	hif_set_association_mode(wvif, info);
+	hif_keep_alive_period(wvif, 0);
+	// beacon_loss_count is defined to 7 in net/mac80211/mlme.c. Let's use
+	// the same value.
+	hif_set_bss_params(wvif, info->aid, 7);
+	hif_set_beacon_wakeup_period(wvif, 1, 1);
+	wfx_update_pm(wvif);
+}
 
-	wfx_cqm_bssloss_sm(wvif, 0, 0, 0);
-	cancel_work_sync(&wvif->unjoin_work);
+int wfx_join_ibss(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	struct wfx_vif *wvif = (struct wfx_vif *)vif->drv_priv;
 
-	wvif->bss_params.beacon_lost_count = 20;
-	wvif->bss_params.aid = info->aid;
+	wfx_upload_ap_templates(wvif);
+	wfx_do_join(wvif);
+	return 0;
+}
 
-	hif_set_association_mode(wvif, info);
+void wfx_leave_ibss(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	struct wfx_vif *wvif = (struct wfx_vif *)vif->drv_priv;
 
-	if (!info->ibss_joined) {
-		hif_keep_alive_period(wvif, 30 /* sec */);
-		hif_set_bss_params(wvif, &wvif->bss_params);
-		hif_set_beacon_wakeup_period(wvif, info->dtim_period,
-					     info->dtim_period);
-		wfx_update_pm(wvif);
+	wfx_do_unjoin(wvif);
+}
+
+void wfx_enable_beacon(struct wfx_vif *wvif, bool enable)
+{
+	// Driver has Content After DTIM Beacon in queue. Driver is waiting for
+	// a signal from the firmware. Since we are going to stop to send
+	// beacons, this signal will never happens. See also
+	// wfx_suspend_resume_mc()
+	if (!enable && wfx_tx_queues_has_cab(wvif)) {
+		wvif->after_dtim_tx_allowed = true;
+		wfx_bh_request_tx(wvif->wdev);
 	}
+	hif_beacon_transmit(wvif, enable);
 }
 
 void wfx_bss_info_changed(struct ieee80211_hw *hw,
@@ -724,7 +539,6 @@ void wfx_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct wfx_dev *wdev = hw->priv;
 	struct wfx_vif *wvif = (struct wfx_vif *) vif->drv_priv;
-	bool do_join = false;
 	int i;
 
 	mutex_lock(&wdev->conf_mutex);
@@ -742,92 +556,52 @@ void wfx_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
-	if (changed & BSS_CHANGED_BEACON ||
-	    changed & BSS_CHANGED_AP_PROBE_RESP ||
-	    changed & BSS_CHANGED_BSSID ||
-	    changed & BSS_CHANGED_SSID ||
-	    changed & BSS_CHANGED_IBSS) {
-		wvif->beacon_int = info->beacon_int;
-		wfx_update_beaconing(wvif);
-		wfx_upload_ap_templates(wvif);
-		wfx_fwd_probe_req(wvif, false);
+	if (changed & BSS_CHANGED_BASIC_RATES ||
+	    changed & BSS_CHANGED_BEACON_INT ||
+	    changed & BSS_CHANGED_BSSID) {
+		if (vif->type == NL80211_IFTYPE_STATION)
+			wfx_do_join(wvif);
 	}
 
-	if (changed & BSS_CHANGED_BEACON_ENABLED &&
-	    wvif->state != WFX_STATE_IBSS)
-		hif_beacon_transmit(wvif, info->enable_beacon);
+	if (changed & BSS_CHANGED_AP_PROBE_RESP ||
+	    changed & BSS_CHANGED_BEACON)
+		wfx_upload_ap_templates(wvif);
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED)
+		wfx_enable_beacon(wvif, info->enable_beacon);
 
-	if (changed & BSS_CHANGED_BEACON_INFO)
+	if (changed & BSS_CHANGED_BEACON_INFO) {
+		if (vif->type != NL80211_IFTYPE_STATION)
+			dev_warn(wdev->dev, "%s: misunderstood change: BEACON_INFO\n",
+				 __func__);
 		hif_set_beacon_wakeup_period(wvif, info->dtim_period,
 					     info->dtim_period);
-
-	/* assoc/disassoc, or maybe AID changed */
-	if (changed & BSS_CHANGED_ASSOC) {
-		wfx_tx_lock_flush(wdev);
-		wvif->wep_default_key_id = -1;
-		wfx_tx_unlock(wdev);
+		// We temporary forwarded beacon for join process. It is now no
+		// more necessary.
+		wfx_filter_beacon(wvif, true);
 	}
 
-	if (changed & BSS_CHANGED_ASSOC && !info->assoc &&
-	    (wvif->state == WFX_STATE_STA || wvif->state == WFX_STATE_IBSS)) {
-		/* Shedule unjoin work */
-		wfx_tx_lock(wdev);
-		if (!schedule_work(&wvif->unjoin_work))
-			wfx_tx_unlock(wdev);
-	} else {
-		if (changed & BSS_CHANGED_BEACON_INT) {
-			if (info->ibss_joined)
-				do_join = true;
-			else if (wvif->state == WFX_STATE_AP)
-				wfx_update_beaconing(wvif);
-		}
-
-		if (changed & BSS_CHANGED_BSSID)
-			do_join = true;
-
-		if (changed & BSS_CHANGED_ASSOC ||
-		    changed & BSS_CHANGED_BSSID ||
-		    changed & BSS_CHANGED_IBSS ||
-		    changed & BSS_CHANGED_BASIC_RATES ||
-		    changed & BSS_CHANGED_HT) {
-			if (info->assoc) {
-				if (wvif->state < WFX_STATE_PRE_STA) {
-					ieee80211_connection_loss(vif);
-					mutex_unlock(&wdev->conf_mutex);
-					return;
-				} else if (wvif->state == WFX_STATE_PRE_STA) {
-					wvif->state = WFX_STATE_STA;
-				}
-			} else {
-				do_join = true;
-			}
-
-			if (info->assoc || info->ibss_joined)
-				wfx_join_finalize(wvif, info);
-			else
-				memset(&wvif->bss_params, 0,
-				       sizeof(wvif->bss_params));
-		}
+	if (changed & BSS_CHANGED_ASSOC) {
+		if (info->assoc || info->ibss_joined)
+			wfx_join_finalize(wvif, info);
+		else if (!info->assoc && vif->type == NL80211_IFTYPE_STATION)
+			wfx_do_unjoin(wvif);
+		else
+			dev_warn(wdev->dev, "%s: misunderstood change: ASSOC\n",
+				 __func__);
 	}
 
-	if (changed & BSS_CHANGED_ASSOC ||
-	    changed & BSS_CHANGED_ERP_CTS_PROT ||
-	    changed & BSS_CHANGED_ERP_PREAMBLE) {
-		u8 erp_ie[3] = { WLAN_EID_ERP_INFO, 1, 0 };
+	if (changed & BSS_CHANGED_KEEP_ALIVE)
+		hif_keep_alive_period(wvif, info->max_idle_period *
+					    USEC_PER_TU / USEC_PER_MSEC);
 
+	if (changed & BSS_CHANGED_ERP_CTS_PROT)
 		hif_erp_use_protection(wvif, info->use_cts_prot);
-		if (info->use_cts_prot)
-			erp_ie[2] |= WLAN_ERP_USE_PROTECTION;
-		if (info->use_short_preamble)
-			erp_ie[2] |= WLAN_ERP_BARKER_PREAMBLE;
-		if (wvif->vif->type != NL80211_IFTYPE_STATION)
-			hif_update_ie_beacon(wvif, erp_ie, sizeof(erp_ie));
-	}
 
-	if (changed & BSS_CHANGED_ASSOC || changed & BSS_CHANGED_ERP_SLOT)
+	if (changed & BSS_CHANGED_ERP_SLOT)
 		hif_slot_time(wvif, info->use_short_slot ? 9 : 20);
 
-	if (changed & BSS_CHANGED_ASSOC || changed & BSS_CHANGED_CQM)
+	if (changed & BSS_CHANGED_CQM)
 		hif_set_rcpi_rssi_threshold(wvif, info->cqm_rssi_thold,
 					    info->cqm_rssi_hyst);
 
@@ -838,31 +612,6 @@ void wfx_bss_info_changed(struct ieee80211_hw *hw,
 		wfx_update_pm(wvif);
 
 	mutex_unlock(&wdev->conf_mutex);
-
-	if (do_join)
-		wfx_do_join(wvif);
-}
-
-static void wfx_ps_notify_sta(struct wfx_vif *wvif,
-			      enum sta_notify_cmd notify_cmd, int link_id)
-{
-	spin_lock_bh(&wvif->ps_state_lock);
-	if (notify_cmd == STA_NOTIFY_SLEEP)
-		wvif->sta_asleep_mask |= BIT(link_id);
-	else // notify_cmd == STA_NOTIFY_AWAKE
-		wvif->sta_asleep_mask &= ~BIT(link_id);
-	spin_unlock_bh(&wvif->ps_state_lock);
-	if (notify_cmd == STA_NOTIFY_AWAKE)
-		wfx_bh_request_tx(wvif->wdev);
-}
-
-void wfx_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-		    enum sta_notify_cmd notify_cmd, struct ieee80211_sta *sta)
-{
-	struct wfx_vif *wvif = (struct wfx_vif *) vif->drv_priv;
-	struct wfx_sta_priv *sta_priv = (struct wfx_sta_priv *) &sta->drv_priv;
-
-	wfx_ps_notify_sta(wvif, notify_cmd, sta_priv->link_id);
 }
 
 static int wfx_update_tim(struct wfx_vif *wvif)
@@ -873,10 +622,8 @@ static int wfx_update_tim(struct wfx_vif *wvif)
 
 	skb = ieee80211_beacon_get_tim(wvif->wdev->hw, wvif->vif,
 				       &tim_offset, &tim_length);
-	if (!skb) {
-		__wfx_flush(wvif->wdev, true);
+	if (!skb)
 		return -ENOENT;
-	}
 	tim_ptr = skb->data + tim_offset;
 
 	if (tim_offset && tim_length >= 6) {
@@ -886,7 +633,7 @@ static int wfx_update_tim(struct wfx_vif *wvif)
 		tim_ptr[2] = 0;
 
 		/* Set/reset aid0 bit */
-		if (wfx_tx_queues_get_after_dtim(wvif))
+		if (wfx_tx_queues_has_cab(wvif))
 			tim_ptr[4] |= 1;
 		else
 			tim_ptr[4] &= ~1;
@@ -917,7 +664,9 @@ int wfx_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set)
 
 void wfx_suspend_resume_mc(struct wfx_vif *wvif, enum sta_notify_cmd notify_cmd)
 {
-	WARN(!wfx_tx_queues_get_after_dtim(wvif), "incorrect sequence");
+	if (notify_cmd != STA_NOTIFY_AWAKE)
+		return;
+	WARN(!wfx_tx_queues_has_cab(wvif), "incorrect sequence");
 	WARN(wvif->after_dtim_tx_allowed, "incorrect sequence");
 	wvif->after_dtim_tx_allowed = true;
 	wfx_bh_request_tx(wvif->wdev);
@@ -1021,33 +770,18 @@ int wfx_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	wvif->wdev = wdev;
 
 	wvif->link_id_map = 1; // link-id 0 is reserved for multicast
-	spin_lock_init(&wvif->ps_state_lock);
 	INIT_WORK(&wvif->update_tim_work, wfx_update_tim_work);
-
-	memset(&wvif->bss_params, 0, sizeof(wvif->bss_params));
-
-	mutex_init(&wvif->bss_loss_lock);
-	INIT_DELAYED_WORK(&wvif->bss_loss_work, wfx_bss_loss_work);
-
-	wvif->wep_default_key_id = -1;
-	INIT_WORK(&wvif->wep_key_work, wfx_wep_key_work);
-
-	spin_lock_init(&wvif->event_queue_lock);
-	INIT_LIST_HEAD(&wvif->event_queue);
-	INIT_WORK(&wvif->event_handler_work, wfx_event_handler_work);
+	INIT_DELAYED_WORK(&wvif->beacon_loss_work, wfx_beacon_loss_work);
 
 	init_completion(&wvif->set_pm_mode_complete);
 	complete(&wvif->set_pm_mode_complete);
-	INIT_WORK(&wvif->update_filtering_work, wfx_update_filtering_work);
-	INIT_WORK(&wvif->bss_params_work, wfx_bss_params_work);
-	INIT_WORK(&wvif->unjoin_work, wfx_unjoin_work);
+	INIT_WORK(&wvif->update_pm_work, wfx_update_pm_work);
 	INIT_WORK(&wvif->tx_policy_upload_work, wfx_tx_policy_upload_work);
 
 	mutex_init(&wvif->scan_lock);
 	init_completion(&wvif->scan_complete);
 	INIT_WORK(&wvif->scan_work, wfx_hw_scan_work);
 
-	INIT_WORK(&wvif->tx_policy_upload_work, wfx_tx_policy_upload_work);
 	mutex_unlock(&wdev->conf_mutex);
 
 	hif_set_macaddr(wvif, vif->addr);
@@ -1076,34 +810,12 @@ void wfx_remove_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&wdev->conf_mutex);
 	WARN(wvif->link_id_map != 1, "corrupted state");
-	switch (wvif->state) {
-	case WFX_STATE_PRE_STA:
-	case WFX_STATE_STA:
-	case WFX_STATE_IBSS:
-		wfx_tx_lock_flush(wdev);
-		if (!schedule_work(&wvif->unjoin_work))
-			wfx_tx_unlock(wdev);
-		break;
-	case WFX_STATE_AP:
-		wvif->sta_asleep_mask = 0;
-		/* reset.link_id = 0; */
-		hif_reset(wvif, false);
-		break;
-	default:
-		break;
-	}
-
-	wvif->state = WFX_STATE_PASSIVE;
-	wfx_tx_queues_wait_empty_vif(wvif);
-	wfx_tx_unlock(wdev);
 
-	/* FIXME: In add to reset MAC address, try to reset interface */
+	hif_reset(wvif, false);
 	hif_set_macaddr(wvif, NULL);
+	wfx_tx_policy_init(wvif);
 
-	wfx_cqm_bssloss_sm(wvif, 0, 0, 0);
-	cancel_work_sync(&wvif->unjoin_work);
-	wfx_free_event_queue(wvif);
-
+	cancel_delayed_work_sync(&wvif->beacon_loss_work);
 	wdev->vif[wvif->id] = NULL;
 	wvif->vif = NULL;
 
@@ -1129,10 +841,5 @@ void wfx_stop(struct ieee80211_hw *hw)
 {
 	struct wfx_dev *wdev = hw->priv;
 
-	wfx_tx_lock_flush(wdev);
-	mutex_lock(&wdev->conf_mutex);
-	wfx_tx_queues_clear(wdev);
-	mutex_unlock(&wdev->conf_mutex);
-	wfx_tx_unlock(wdev);
-	WARN(atomic_read(&wdev->tx_lock), "tx_lock is locked");
+	wfx_tx_queues_check_empty(wdev);
 }
diff --git a/drivers/staging/wfx/sta.h b/drivers/staging/wfx/sta.h
index cf99a8a74a81..a0e025c18341 100644
--- a/drivers/staging/wfx/sta.h
+++ b/drivers/staging/wfx/sta.h
@@ -15,29 +15,10 @@
 struct wfx_dev;
 struct wfx_vif;
 
-enum wfx_state {
-	WFX_STATE_PASSIVE = 0,
-	WFX_STATE_PRE_STA,
-	WFX_STATE_STA,
-	WFX_STATE_IBSS,
-	WFX_STATE_AP,
-};
-
-struct wfx_hif_event {
-	struct list_head link;
-	struct hif_ind_event evt;
-};
-
-struct wfx_grp_addr_table {
-	bool enable;
-	int num_addresses;
-	u8 address_list[8][ETH_ALEN];
-};
-
 struct wfx_sta_priv {
 	int link_id;
 	int vif_id;
-	u8 buffered[IEEE80211_NUM_TIDS];
+	int buffered[IEEE80211_NUM_TIDS];
 	// Ensure atomicity of "buffered" and calls to ieee80211_sta_set_buffered()
 	spinlock_t lock;
 };
@@ -47,6 +28,8 @@ int wfx_start(struct ieee80211_hw *hw);
 void wfx_stop(struct ieee80211_hw *hw);
 int wfx_config(struct ieee80211_hw *hw, u32 changed);
 int wfx_set_rts_threshold(struct ieee80211_hw *hw, u32 value);
+void wfx_set_default_unicast_key(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif, int idx);
 u64 wfx_prepare_multicast(struct ieee80211_hw *hw,
 			  struct netdev_hw_addr_list *mc_list);
 void wfx_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
@@ -54,8 +37,10 @@ void wfx_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
 
 int wfx_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 void wfx_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
-void wfx_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-	       u32 queues, bool drop);
+int wfx_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+void wfx_stop_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+int wfx_join_ibss(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+void wfx_leave_ibss(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 int wfx_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		u16 queue, const struct ieee80211_tx_queue_params *params);
 void wfx_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@@ -82,12 +67,12 @@ void wfx_unassign_vif_chanctx(struct ieee80211_hw *hw,
 			      struct ieee80211_chanctx_conf *conf);
 
 // WSM Callbacks
+void wfx_cooling_timeout_work(struct work_struct *work);
+void wfx_suspend_hot_dev(struct wfx_dev *wdev, enum sta_notify_cmd cmd);
 void wfx_suspend_resume_mc(struct wfx_vif *wvif, enum sta_notify_cmd cmd);
+void wfx_event_report_rssi(struct wfx_vif *wvif, u8 raw_rcpi_rssi);
 
 // Other Helpers
-void wfx_cqm_bssloss_sm(struct wfx_vif *wvif, int init, int good, int bad);
-void wfx_update_filtering(struct wfx_vif *wvif);
-int wfx_fwd_probe_req(struct wfx_vif *wvif, bool enable);
 u32 wfx_rate_mask_to_hw(struct wfx_dev *wdev, u32 rates);
 
 #endif /* WFX_STA_H */
diff --git a/drivers/staging/wfx/traces.h b/drivers/staging/wfx/traces.h
index 30c6a13f0e22..bb9f7e9e7d21 100644
--- a/drivers/staging/wfx/traces.h
+++ b/drivers/staging/wfx/traces.h
@@ -104,8 +104,10 @@ hif_msg_list_enum
 	hif_mib_name(ARP_KEEP_ALIVE_PERIOD)          \
 	hif_mib_name(BEACON_FILTER_ENABLE)           \
 	hif_mib_name(BEACON_FILTER_TABLE)            \
+	hif_mib_name(BEACON_STATS)                   \
 	hif_mib_name(BEACON_WAKEUP_PERIOD)           \
 	hif_mib_name(BLOCK_ACK_POLICY)               \
+	hif_mib_name(CCA_CONFIG)                     \
 	hif_mib_name(CONFIG_DATA_FILTER)             \
 	hif_mib_name(COUNTERS_TABLE)                 \
 	hif_mib_name(CURRENT_TX_POWER_LEVEL)         \
@@ -114,29 +116,32 @@ hif_msg_list_enum
 	hif_mib_name(DOT11_MAX_TRANSMIT_MSDU_LIFETIME) \
 	hif_mib_name(DOT11_RTS_THRESHOLD)            \
 	hif_mib_name(DOT11_WEP_DEFAULT_KEY_ID)       \
+	hif_mib_name(ETHERTYPE_DATAFRAME_CONDITION)  \
+	hif_mib_name(EXTENDED_COUNTERS_TABLE)        \
 	hif_mib_name(GL_BLOCK_ACK_INFO)              \
 	hif_mib_name(GL_OPERATIONAL_POWER_MODE)      \
 	hif_mib_name(GL_SET_MULTI_MSG)               \
+	hif_mib_name(GRP_SEQ_COUNTER)                \
 	hif_mib_name(INACTIVITY_TIMER)               \
 	hif_mib_name(INTERFACE_PROTECTION)           \
 	hif_mib_name(IPV4_ADDR_DATAFRAME_CONDITION)  \
 	hif_mib_name(IPV6_ADDR_DATAFRAME_CONDITION)  \
 	hif_mib_name(KEEP_ALIVE_PERIOD)              \
 	hif_mib_name(MAC_ADDR_DATAFRAME_CONDITION)   \
+	hif_mib_name(MAGIC_DATAFRAME_CONDITION)      \
+	hif_mib_name(MAX_TX_POWER_LEVEL)             \
 	hif_mib_name(NON_ERP_PROTECTION)             \
 	hif_mib_name(NS_IP_ADDRESSES_TABLE)          \
 	hif_mib_name(OVERRIDE_INTERNAL_TX_RATE)      \
+	hif_mib_name(PORT_DATAFRAME_CONDITION)       \
 	hif_mib_name(PROTECTED_MGMT_POLICY)          \
-	hif_mib_name(RX_FILTER)                      \
 	hif_mib_name(RCPI_RSSI_THRESHOLD)            \
+	hif_mib_name(RX_FILTER)                      \
 	hif_mib_name(SET_ASSOCIATION_MODE)           \
 	hif_mib_name(SET_DATA_FILTERING)             \
-	hif_mib_name(ETHERTYPE_DATAFRAME_CONDITION)  \
 	hif_mib_name(SET_HT_PROTECTION)              \
-	hif_mib_name(MAGIC_DATAFRAME_CONDITION)      \
 	hif_mib_name(SET_TX_RATE_RETRY_POLICY)       \
 	hif_mib_name(SET_UAPSD_INFORMATION)          \
-	hif_mib_name(PORT_DATAFRAME_CONDITION)       \
 	hif_mib_name(SLOT_TIME)                      \
 	hif_mib_name(STATISTICS_TABLE)               \
 	hif_mib_name(TEMPLATE_FRAME)                 \
@@ -193,8 +198,8 @@ DECLARE_EVENT_CLASS(hif_data,
 	TP_printk("%d:%d:%s_%s%s%s: %s%s (%d bytes)",
 		__entry->tx_fill_level,
 		__entry->if_id,
-		__print_symbolic(__entry->msg_id, hif_msg_list),
 		__entry->msg_type,
+		__print_symbolic(__entry->msg_id, hif_msg_list),
 		__entry->mib != -1 ? "/" : "",
 		__entry->mib != -1 ? __print_symbolic(__entry->mib, hif_mib_list) : "",
 		__print_hex(__entry->buf, __entry->buf_len),
diff --git a/drivers/staging/wfx/wfx.h b/drivers/staging/wfx/wfx.h
index 8b85bb1abb9c..09bbb5da4f06 100644
--- a/drivers/staging/wfx/wfx.h
+++ b/drivers/staging/wfx/wfx.h
@@ -45,18 +45,18 @@ struct wfx_dev {
 	struct hif_ind_startup	hw_caps;
 	struct wfx_hif		hif;
 	struct sl_context	sl;
-	int			chip_frozen;
+	struct delayed_work	cooling_timeout_work;
+	bool			chip_frozen;
 	struct mutex		conf_mutex;
 
 	struct wfx_hif_cmd	hif_cmd;
 	struct wfx_queue	tx_queue[4];
-	struct wfx_queue_stats	tx_queue_stats;
-	int			tx_burst_idx;
+	struct sk_buff_head	tx_pending;
+	wait_queue_head_t	tx_dequeue;
 	atomic_t		tx_lock;
 
 	atomic_t		packet_id;
 	u32			key_map;
-	struct hif_req_add_key	keys[MAX_KEY_ENTRIES];
 
 	struct hif_rx_stats	rx_stats;
 	struct mutex		rx_stats_lock;
@@ -67,42 +67,21 @@ struct wfx_vif {
 	struct ieee80211_vif	*vif;
 	struct ieee80211_channel *channel;
 	int			id;
-	enum wfx_state		state;
-
-	int			bss_loss_state;
-	u32			bss_loss_confirm_id;
-	struct mutex		bss_loss_lock;
-	struct delayed_work	bss_loss_work;
 
 	u32			link_id_map;
 
 	bool			after_dtim_tx_allowed;
-	struct wfx_grp_addr_table mcast_filter;
-
-	s8			wep_default_key_id;
-	struct sk_buff		*wep_pending_skb;
-	struct work_struct	wep_key_work;
+	struct delayed_work	beacon_loss_work;
 
 	struct tx_policy_cache	tx_policy_cache;
 	struct work_struct	tx_policy_upload_work;
 
-	u32			sta_asleep_mask;
-	spinlock_t		ps_state_lock;
 	struct work_struct	update_tim_work;
 
-	int			beacon_int;
-	bool			filter_bssid;
-	bool			fwd_probe_req;
-	bool			disable_beacon_filter;
-	struct work_struct	update_filtering_work;
+	int			filter_mcast_count;
+	u8			filter_mcast_addr[8][ETH_ALEN];
 
 	unsigned long		uapsd_mask;
-	struct ieee80211_tx_queue_params edca_params[IEEE80211_NUM_ACS];
-	struct hif_req_set_bss_params bss_params;
-	struct work_struct	bss_params_work;
-
-	int			join_complete_status;
-	struct work_struct	unjoin_work;
 
 	/* avoid some operations in parallel with scan */
 	struct mutex		scan_lock;
@@ -111,11 +90,9 @@ struct wfx_vif {
 	bool			scan_abort;
 	struct ieee80211_scan_request *scan_req;
 
+	bool			bss_not_support_ps_poll;
+	struct work_struct	update_pm_work;
 	struct completion	set_pm_mode_complete;
-
-	struct list_head	event_queue;
-	spinlock_t		event_queue_lock;
-	struct work_struct	event_handler_work;
 };
 
 static inline struct wfx_vif *wdev_to_wvif(struct wfx_dev *wdev, int vif_id)
diff --git a/drivers/staging/wilc1000/cfg80211.c b/drivers/staging/wilc1000/cfg80211.c
index 4bdcbc5fd2fd..b6065a0d660f 100644
--- a/drivers/staging/wilc1000/cfg80211.c
+++ b/drivers/staging/wilc1000/cfg80211.c
@@ -1217,33 +1217,31 @@ static int mgmt_tx_cancel_wait(struct wiphy *wiphy,
 	return 0;
 }
 
-void wilc_mgmt_frame_register(struct wiphy *wiphy, struct wireless_dev *wdev,
-			      u16 frame_type, bool reg)
+void wilc_update_mgmt_frame_registrations(struct wiphy *wiphy,
+					  struct wireless_dev *wdev,
+					  struct mgmt_frame_regs *upd)
 {
 	struct wilc *wl = wiphy_priv(wiphy);
 	struct wilc_vif *vif = netdev_priv(wdev->netdev);
+	u32 presp_bit = BIT(IEEE80211_STYPE_PROBE_REQ >> 4);
+	u32 action_bit = BIT(IEEE80211_STYPE_ACTION >> 4);
 
-	if (!frame_type)
-		return;
+	if (wl->initialized) {
+		bool prev = vif->mgmt_reg_stypes & presp_bit;
+		bool now = upd->interface_stypes & presp_bit;
 
-	switch (frame_type) {
-	case IEEE80211_STYPE_PROBE_REQ:
-		vif->frame_reg[0].type = frame_type;
-		vif->frame_reg[0].reg = reg;
-		break;
+		if (now != prev)
+			wilc_frame_register(vif, IEEE80211_STYPE_PROBE_REQ, now);
 
-	case IEEE80211_STYPE_ACTION:
-		vif->frame_reg[1].type = frame_type;
-		vif->frame_reg[1].reg = reg;
-		break;
+		prev = vif->mgmt_reg_stypes & action_bit;
+		now = upd->interface_stypes & action_bit;
 
-	default:
-		break;
+		if (now != prev)
+			wilc_frame_register(vif, IEEE80211_STYPE_ACTION, now);
 	}
 
-	if (!wl->initialized)
-		return;
-	wilc_frame_register(vif, frame_type, reg);
+	vif->mgmt_reg_stypes =
+		upd->interface_stypes & (presp_bit | action_bit);
 }
 
 static int set_cqm_rssi_config(struct wiphy *wiphy, struct net_device *dev,
@@ -1665,7 +1663,7 @@ static const struct cfg80211_ops wilc_cfg80211_ops = {
 	.cancel_remain_on_channel = cancel_remain_on_channel,
 	.mgmt_tx_cancel_wait = mgmt_tx_cancel_wait,
 	.mgmt_tx = mgmt_tx,
-	.mgmt_frame_register = wilc_mgmt_frame_register,
+	.update_mgmt_frame_registrations = wilc_update_mgmt_frame_registrations,
 	.set_power_mgmt = set_power_mgmt,
 	.set_cqm_rssi_config = set_cqm_rssi_config,
 
diff --git a/drivers/staging/wilc1000/cfg80211.h b/drivers/staging/wilc1000/cfg80211.h
index 5e5d63f70df2..37b294cb3b37 100644
--- a/drivers/staging/wilc1000/cfg80211.h
+++ b/drivers/staging/wilc1000/cfg80211.h
@@ -21,8 +21,9 @@ void wilc_wfi_deinit_mon_interface(struct wilc *wl, bool rtnl_locked);
 struct net_device *wilc_wfi_init_mon_interface(struct wilc *wl,
 					       const char *name,
 					       struct net_device *real_dev);
-void wilc_mgmt_frame_register(struct wiphy *wiphy, struct wireless_dev *wdev,
-			      u16 frame_type, bool reg);
+void wilc_update_mgmt_frame_registrations(struct wiphy *wiphy,
+					  struct wireless_dev *wdev,
+					  struct mgmt_frame_regs *upd);
 struct wilc_vif *wilc_get_interface(struct wilc *wl);
 struct wilc_vif *wilc_get_wl_to_vif(struct wilc *wl);
 void wlan_deinit_locks(struct wilc *wilc);
diff --git a/drivers/staging/wilc1000/netdev.c b/drivers/staging/wilc1000/netdev.c
index f94a17babd12..fda0ab97b02c 100644
--- a/drivers/staging/wilc1000/netdev.c
+++ b/drivers/staging/wilc1000/netdev.c
@@ -571,6 +571,7 @@ static int wilc_mac_open(struct net_device *ndev)
 	struct wilc *wl = vif->wilc;
 	unsigned char mac_add[ETH_ALEN] = {0};
 	int ret = 0;
+	struct mgmt_frame_regs mgmt_regs = {};
 
 	if (!wl || !wl->dev) {
 		netdev_err(ndev, "device not ready\n");
@@ -602,14 +603,12 @@ static int wilc_mac_open(struct net_device *ndev)
 		return -EINVAL;
 	}
 
-	wilc_mgmt_frame_register(vif->ndev->ieee80211_ptr->wiphy,
-				 vif->ndev->ieee80211_ptr,
-				 vif->frame_reg[0].type,
-				 vif->frame_reg[0].reg);
-	wilc_mgmt_frame_register(vif->ndev->ieee80211_ptr->wiphy,
-				 vif->ndev->ieee80211_ptr,
-				 vif->frame_reg[1].type,
-				 vif->frame_reg[1].reg);
+	mgmt_regs.interface_stypes = vif->mgmt_reg_stypes;
+	/* so we detect a change */
+	vif->mgmt_reg_stypes = 0;
+	wilc_update_mgmt_frame_registrations(vif->ndev->ieee80211_ptr->wiphy,
+					     vif->ndev->ieee80211_ptr,
+					     &mgmt_regs);
 	netif_wake_queue(ndev);
 	wl->open_ifcs++;
 	vif->mac_opened = 1;
@@ -792,12 +791,10 @@ void wilc_wfi_mgmt_rx(struct wilc *wilc, u8 *buff, u32 size)
 	srcu_idx = srcu_read_lock(&wilc->srcu);
 	list_for_each_entry_rcu(vif, &wilc->vif_list, list) {
 		u16 type = le16_to_cpup((__le16 *)buff);
+		u32 type_bit = BIT(type >> 4);
 
 		if (vif->priv.p2p_listen_state &&
-		    ((type == vif->frame_reg[0].type &&
-		      vif->frame_reg[0].reg) ||
-		     (type == vif->frame_reg[1].type &&
-		      vif->frame_reg[1].reg)))
+		    vif->mgmt_reg_stypes & type_bit)
 			wilc_wfi_p2p_rx(vif, buff, size);
 
 		if (vif->monitor_flag)
diff --git a/drivers/staging/wilc1000/netdev.h b/drivers/staging/wilc1000/netdev.h
index 61cbec674a62..d0a006b68d08 100644
--- a/drivers/staging/wilc1000/netdev.h
+++ b/drivers/staging/wilc1000/netdev.h
@@ -24,8 +24,6 @@
 #define PMKID_FOUND				1
 #define NUM_STA_ASSOCIATED			8
 
-#define NUM_REG_FRAME				2
-
 #define TCP_ACK_FILTER_LINK_SPEED_THRESH	54
 #define DEFAULT_LINK_SPEED			72
 
@@ -151,11 +149,6 @@ struct wilc_priv {
 	u64 inc_roc_cookie;
 };
 
-struct frame_reg {
-	u16 type;
-	bool reg;
-};
-
 #define MAX_TCP_SESSION                25
 #define MAX_PENDING_ACKS               256
 
@@ -187,7 +180,7 @@ struct wilc_vif {
 	u8 iftype;
 	int monitor_flag;
 	int mac_opened;
-	struct frame_reg frame_reg[NUM_REG_FRAME];
+	u32 mgmt_reg_stypes;
 	struct net_device_stats netstats;
 	struct wilc *wilc;
 	u8 bssid[ETH_ALEN];
diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c
index 89183b3b178f..45ba07c6ec27 100644
--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -1228,18 +1228,20 @@ void iscsit_print_session_params(struct iscsi_session *sess)
 	iscsi_dump_sess_ops(sess->sess_ops);
 }
 
-static int iscsit_do_rx_data(
+int rx_data(
 	struct iscsi_conn *conn,
-	struct iscsi_data_count *count)
+	struct kvec *iov,
+	int iov_count,
+	int data)
 {
-	int data = count->data_length, rx_loop = 0, total_rx = 0;
+	int rx_loop = 0, total_rx = 0;
 	struct msghdr msg;
 
 	if (!conn || !conn->sock || !conn->conn_ops)
 		return -1;
 
 	memset(&msg, 0, sizeof(struct msghdr));
-	iov_iter_kvec(&msg.msg_iter, READ, count->iov, count->iov_count, data);
+	iov_iter_kvec(&msg.msg_iter, READ, iov, iov_count, data);
 
 	while (msg_data_left(&msg)) {
 		rx_loop = sock_recvmsg(conn->sock, &msg, MSG_WAITALL);
@@ -1256,26 +1258,6 @@ static int iscsit_do_rx_data(
 	return total_rx;
 }
 
-int rx_data(
-	struct iscsi_conn *conn,
-	struct kvec *iov,
-	int iov_count,
-	int data)
-{
-	struct iscsi_data_count c;
-
-	if (!conn || !conn->sock || !conn->conn_ops)
-		return -1;
-
-	memset(&c, 0, sizeof(struct iscsi_data_count));
-	c.iov = iov;
-	c.iov_count = iov_count;
-	c.data_length = data;
-	c.type = ISCSI_RX_DATA;
-
-	return iscsit_do_rx_data(conn, &c);
-}
-
 int tx_data(
 	struct iscsi_conn *conn,
 	struct kvec *iov,
diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index 51ffd5c002de..1c181d31f4c8 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -432,7 +432,7 @@ iblock_execute_zero_out(struct block_device *bdev, struct se_cmd *cmd)
 				target_to_linux_sector(dev, cmd->t_task_lba),
 				target_to_linux_sector(dev,
 					sbc_get_write_same_sectors(cmd)),
-				GFP_KERNEL, false);
+				GFP_KERNEL, BLKDEV_ZERO_NOUNMAP);
 	if (ret)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 91af271e9bb0..e53314ea9e25 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -273,6 +273,16 @@ config IMX8MM_THERMAL
 	  cpufreq is used as the cooling device to throttle CPUs when the passive
 	  trip is crossed.
 
+config K3_THERMAL
+	tristate "Texas Instruments K3 thermal support"
+	depends on ARCH_K3 || COMPILE_TEST
+	help
+	  If you say yes here you get thermal support for the Texas Instruments
+	  K3 SoC family. The current chip supported is:
+	  - AM654
+
+	  This includes temperature reading functionality.
+
 config MAX77620_THERMAL
 	tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
 	depends on MFD_MAX77620
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 8c8ed7b79915..86c506410cc0 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL)	+= clock_cooling.o
 # devfreq cooling
 thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
 
+obj-$(CONFIG_K3_THERMAL)	+= k3_bandgap.o
 # platform thermal drivers
 obj-y				+= broadcom/
 obj-$(CONFIG_THERMAL_MMIO)		+= thermal_mmio.o
diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
index a87d4fa031c8..f7f32e98331b 100644
--- a/drivers/thermal/devfreq_cooling.c
+++ b/drivers/thermal/devfreq_cooling.c
@@ -24,11 +24,13 @@
 #include <linux/idr.h>
 #include <linux/slab.h>
 #include <linux/pm_opp.h>
+#include <linux/pm_qos.h>
 #include <linux/thermal.h>
 
 #include <trace/events/thermal.h>
 
-#define SCALE_ERROR_MITIGATION 100
+#define HZ_PER_KHZ		1000
+#define SCALE_ERROR_MITIGATION	100
 
 static DEFINE_IDA(devfreq_ida);
 
@@ -54,6 +56,8 @@ static DEFINE_IDA(devfreq_ida);
  *		The 'res_util' range is from 100 to (power_table[state] * 100)
  *		for the corresponding 'state'.
  * @capped_state:	index to cooling state with in dynamic power budget
+ * @req_max_freq:	PM QoS request for limiting the maximum frequency
+ *			of the devfreq device.
  */
 struct devfreq_cooling_device {
 	int id;
@@ -66,49 +70,9 @@ struct devfreq_cooling_device {
 	struct devfreq_cooling_power *power_ops;
 	u32 res_util;
 	int capped_state;
+	struct dev_pm_qos_request req_max_freq;
 };
 
-/**
- * partition_enable_opps() - disable all opps above a given state
- * @dfc:	Pointer to devfreq we are operating on
- * @cdev_state:	cooling device state we're setting
- *
- * Go through the OPPs of the device, enabling all OPPs until
- * @cdev_state and disabling those frequencies above it.
- */
-static int partition_enable_opps(struct devfreq_cooling_device *dfc,
-				 unsigned long cdev_state)
-{
-	int i;
-	struct device *dev = dfc->devfreq->dev.parent;
-
-	for (i = 0; i < dfc->freq_table_size; i++) {
-		struct dev_pm_opp *opp;
-		int ret = 0;
-		unsigned int freq = dfc->freq_table[i];
-		bool want_enable = i >= cdev_state ? true : false;
-
-		opp = dev_pm_opp_find_freq_exact(dev, freq, !want_enable);
-
-		if (PTR_ERR(opp) == -ERANGE)
-			continue;
-		else if (IS_ERR(opp))
-			return PTR_ERR(opp);
-
-		dev_pm_opp_put(opp);
-
-		if (want_enable)
-			ret = dev_pm_opp_enable(dev, freq);
-		else
-			ret = dev_pm_opp_disable(dev, freq);
-
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
 static int devfreq_cooling_get_max_state(struct thermal_cooling_device *cdev,
 					 unsigned long *state)
 {
@@ -135,7 +99,7 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
 	struct devfreq_cooling_device *dfc = cdev->devdata;
 	struct devfreq *df = dfc->devfreq;
 	struct device *dev = df->dev.parent;
-	int ret;
+	unsigned long freq;
 
 	if (state == dfc->cooling_state)
 		return 0;
@@ -145,9 +109,10 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
 	if (state >= dfc->freq_table_size)
 		return -EINVAL;
 
-	ret = partition_enable_opps(dfc, state);
-	if (ret)
-		return ret;
+	freq = dfc->freq_table[state];
+
+	dev_pm_qos_update_request(&dfc->req_max_freq,
+				  DIV_ROUND_UP(freq, HZ_PER_KHZ));
 
 	dfc->cooling_state = state;
 
@@ -530,9 +495,15 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
 	if (err)
 		goto free_dfc;
 
-	err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL);
+	err = dev_pm_qos_add_request(df->dev.parent, &dfc->req_max_freq,
+				     DEV_PM_QOS_MAX_FREQUENCY,
+				     PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE);
 	if (err < 0)
 		goto free_tables;
+
+	err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL);
+	if (err < 0)
+		goto remove_qos_req;
 	dfc->id = err;
 
 	snprintf(dev_name, sizeof(dev_name), "thermal-devfreq-%d", dfc->id);
@@ -553,6 +524,10 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
 
 release_ida:
 	ida_simple_remove(&devfreq_ida, dfc->id);
+
+remove_qos_req:
+	dev_pm_qos_remove_request(&dfc->req_max_freq);
+
 free_tables:
 	kfree(dfc->power_table);
 	kfree(dfc->freq_table);
@@ -601,6 +576,7 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
 
 	thermal_cooling_device_unregister(dfc->cdev);
 	ida_simple_remove(&devfreq_ida, dfc->id);
+	dev_pm_qos_remove_request(&dfc->req_max_freq);
 	kfree(dfc->power_table);
 	kfree(dfc->freq_table);
 
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index 0d60f8d7894f..e6061e26d4ac 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -54,7 +54,7 @@ struct imx8mm_tmu {
 	void __iomem *base;
 	struct clk *clk;
 	const struct thermal_soc_data *socdata;
-	struct tmu_sensor sensors[0];
+	struct tmu_sensor sensors[];
 };
 
 static int imx8mm_tmu_get_temp(void *data, int *temp)
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index a8723b1eb8b0..b2b68c943738 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -14,6 +14,7 @@
 #include <linux/thermal.h>
 
 #include "thermal_core.h"
+#include "thermal_hwmon.h"
 
 #define IMX_SC_MISC_FUNC_GET_TEMP	13
 
@@ -115,6 +116,9 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 			ret = PTR_ERR(sensor->tzd);
 			break;
 		}
+
+		if (devm_thermal_add_hwmon_sysfs(sensor->tzd))
+			dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
 	}
 
 	of_node_put(sensor_np);
diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
index ceef89c956bd..e802922a13cf 100644
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -271,6 +271,8 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
 
 static struct thermal_zone_device_ops int3400_thermal_ops = {
 	.get_temp = int3400_thermal_get_temp,
+	.get_mode = int3400_thermal_get_mode,
+	.set_mode = int3400_thermal_set_mode,
 };
 
 static struct thermal_zone_params int3400_thermal_params = {
@@ -309,9 +311,6 @@ static int int3400_thermal_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
-	int3400_thermal_ops.get_mode = int3400_thermal_get_mode;
-	int3400_thermal_ops.set_mode = int3400_thermal_set_mode;
-
 	priv->thermal = thermal_zone_device_register("INT3400 Thermal", 0, 0,
 						priv, &int3400_thermal_ops,
 						&int3400_thermal_params, 0, 0);
diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
new file mode 100644
index 000000000000..35f41e8a0b75
--- /dev/null
+++ b/drivers/thermal/k3_bandgap.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI Bandgap temperature sensor driver for K3 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+
+#define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
+#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
+#define K3_VTM_TMPSENS0_CTRL_OFFSET	0x80
+#define K3_VTM_REGS_PER_TS			0x10
+#define K3_VTM_TS_STAT_DTEMP_MASK	0x3ff
+#define K3_VTM_TMPSENS_CTRL_CBIASSEL	BIT(0)
+#define K3_VTM_TMPSENS_CTRL_SOC		BIT(5)
+#define K3_VTM_TMPSENS_CTRL_CLRZ		BIT(6)
+#define K3_VTM_TMPSENS_CTRL_CLKON_REQ	BIT(7)
+
+#define K3_VTM_ADC_BEGIN_VAL		540
+#define K3_VTM_ADC_END_VAL		944
+
+static const int k3_adc_to_temp[] = {
+	-40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
+	-37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200,
+	-33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600,
+	-30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600,
+	-26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000,
+	-22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000,
+	-18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400,
+	-15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400,
+	-11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400,
+	-7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000,
+	-2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400,
+	1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600,
+	7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000,
+	11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400,
+	15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400,
+	19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800,
+	24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800,
+	28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900,
+	32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200,
+	36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200,
+	40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600,
+	45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600,
+	49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600,
+	53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000,
+	57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000,
+	61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000,
+	65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000,
+	69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400,
+	73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400,
+	77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400,
+	81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400,
+	85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400,
+	89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400,
+	93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500,
+	98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400,
+	101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000,
+	105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600,
+	109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200,
+	112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800,
+	116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400,
+	119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
+	123400, 123800, 124200, 124600, 124900, 125000,
+};
+
+struct k3_bandgap {
+	void __iomem *base;
+	const struct k3_bandgap_data *conf;
+};
+
+/* common data structures */
+struct k3_thermal_data {
+	struct thermal_zone_device *tzd;
+	struct k3_bandgap *bgp;
+	int sensor_id;
+	u32 ctrl_offset;
+	u32 stat_offset;
+};
+
+static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
+				       unsigned int s2)
+{
+	int d01 = abs(s0 - s1);
+	int d02 = abs(s0 - s2);
+	int d12 = abs(s1 - s2);
+
+	if (d01 <= d02 && d01 <= d12)
+		return (s0 + s1) / 2;
+
+	if (d02 <= d01 && d02 <= d12)
+		return (s0 + s2) / 2;
+
+	return (s1 + s2) / 2;
+}
+
+static int k3_bgp_read_temp(struct k3_thermal_data *devdata,
+			    int *temp)
+{
+	struct k3_bandgap *bgp;
+	unsigned int dtemp, s0, s1, s2;
+
+	bgp = devdata->bgp;
+
+	/*
+	 * Errata is applicable for am654 pg 1.0 silicon. There
+	 * is a variation of the order for 8-10 degree centigrade.
+	 * Work around that by getting the average of two closest
+	 * readings out of three readings everytime we want to
+	 * report temperatures.
+	 *
+	 * Errata workaround.
+	 */
+	s0 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s1 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s2 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	dtemp = vtm_get_best_value(s0, s1, s2);
+
+	if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL)
+		return -EINVAL;
+
+	*temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL];
+
+	return 0;
+}
+
+static int k3_thermal_get_temp(void *devdata, int *temp)
+{
+	struct k3_thermal_data *data = devdata;
+	int ret = 0;
+
+	ret = k3_bgp_read_temp(data, temp);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+static const struct thermal_zone_of_device_ops k3_of_thermal_ops = {
+	.get_temp = k3_thermal_get_temp,
+};
+
+static const struct of_device_id of_k3_bandgap_match[];
+
+static int k3_bandgap_probe(struct platform_device *pdev)
+{
+	int ret = 0, cnt, val, id;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct k3_bandgap *bgp;
+	struct k3_thermal_data *data;
+
+	if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 -
+						K3_VTM_ADC_BEGIN_VAL))
+		return -EINVAL;
+
+	bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
+	if (!bgp)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bgp->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bgp->base))
+		return PTR_ERR(bgp->base);
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
+	/* Get the sensor count in the VTM */
+	val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
+	cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
+	cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
+
+	data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	/* Register the thermal sensors */
+	for (id = 0; id < cnt; id++) {
+		data[id].sensor_id = id;
+		data[id].bgp = bgp;
+		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
+					id * K3_VTM_REGS_PER_TS;
+		data[id].stat_offset = data[id].ctrl_offset + 0x8;
+
+		val = readl(data[id].bgp->base + data[id].ctrl_offset);
+		val |= (K3_VTM_TMPSENS_CTRL_SOC |
+			K3_VTM_TMPSENS_CTRL_CLRZ |
+			K3_VTM_TMPSENS_CTRL_CLKON_REQ);
+		val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
+		writel(val, data[id].bgp->base + data[id].ctrl_offset);
+
+		data[id].tzd =
+		devm_thermal_zone_of_sensor_register(dev, id,
+						     &data[id],
+						     &k3_of_thermal_ops);
+		if (IS_ERR(data[id].tzd)) {
+			dev_err(dev, "thermal zone device is NULL\n");
+			ret = PTR_ERR(data[id].tzd);
+			goto err_alloc;
+		}
+	}
+
+	platform_set_drvdata(pdev, bgp);
+
+	return 0;
+
+err_alloc:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int k3_bandgap_remove(struct platform_device *pdev)
+{
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id of_k3_bandgap_match[] = {
+	{
+		.compatible = "ti,am654-vtm",
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_k3_bandgap_match);
+
+static struct platform_driver k3_bandgap_sensor_driver = {
+	.probe = k3_bandgap_probe,
+	.remove = k3_bandgap_remove,
+	.driver = {
+		.name = "k3-soc-thermal",
+		.of_match_table	= of_k3_bandgap_match,
+	},
+};
+
+module_platform_driver(k3_bandgap_sensor_driver);
+
+MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 7c1a8bccdcba..15a71ecc916c 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -1241,10 +1241,8 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
 		return -ENXIO;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq resource?\n");
+	if (irq < 0)
 		return -EINVAL;
-	}
 
 	thermal = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_thermal_data),
 			       GFP_KERNEL);
diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
index a824b78dabf8..a0114452d11f 100644
--- a/drivers/thermal/st/st_thermal_memmap.c
+++ b/drivers/thermal/st/st_thermal_memmap.c
@@ -94,10 +94,8 @@ static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor)
 	int ret;
 
 	sensor->irq = platform_get_irq(pdev, 0);
-	if (sensor->irq < 0) {
-		dev_err(dev, "failed to register IRQ\n");
+	if (sensor->irq < 0)
 		return sensor->irq;
-	}
 
 	ret = devm_request_threaded_irq(dev, sensor->irq,
 					NULL, st_mmap_thermal_trip_handler,
diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
index 9314e3df6a42..331e2b768df5 100644
--- a/drivers/thermal/st/stm_thermal.c
+++ b/drivers/thermal/st/stm_thermal.c
@@ -385,10 +385,8 @@ static int stm_register_irq(struct stm_thermal_sensor *sensor)
 	int ret;
 
 	sensor->irq = platform_get_irq(pdev, 0);
-	if (sensor->irq < 0) {
-		dev_err(dev, "%s: Unable to find IRQ\n", __func__);
+	if (sensor->irq < 0)
 		return sensor->irq;
-	}
 
 	ret = devm_request_threaded_irq(dev, sensor->irq,
 					NULL,
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 9a321dc548c8..c06550930979 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -447,12 +447,6 @@ static void update_temperature(struct thermal_zone_device *tz)
 	mutex_unlock(&tz->lock);
 
 	trace_thermal_temperature(tz);
-	if (tz->last_temperature == THERMAL_TEMP_INVALID)
-		dev_dbg(&tz->device, "last_temperature N/A, current_temperature=%d\n",
-			tz->temperature);
-	else
-		dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
-			tz->last_temperature, tz->temperature);
 }
 
 static void thermal_zone_device_init(struct thermal_zone_device *tz)
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index a9bf00e91d64..c95689586e19 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -12,6 +12,17 @@
 #include <linux/device.h>
 #include <linux/thermal.h>
 
+/* Default Thermal Governor */
+#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
+#define DEFAULT_THERMAL_GOVERNOR       "step_wise"
+#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE)
+#define DEFAULT_THERMAL_GOVERNOR       "fair_share"
+#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE)
+#define DEFAULT_THERMAL_GOVERNOR       "user_space"
+#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR)
+#define DEFAULT_THERMAL_GOVERNOR       "power_allocator"
+#endif
+
 /* Initial state of a cooling device during binding */
 #define THERMAL_NO_TARGET -1UL
 
@@ -30,6 +41,44 @@ extern struct thermal_governor *__governor_thermal_table_end[];
 	     __governor < __governor_thermal_table_end;	\
 	     __governor++)
 
+struct thermal_attr {
+	struct device_attribute attr;
+	char name[THERMAL_NAME_LENGTH];
+};
+
+static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
+{
+	return cdev->ops->get_requested_power && cdev->ops->state2power &&
+		cdev->ops->power2state;
+}
+
+int power_actor_get_max_power(struct thermal_cooling_device *cdev,
+			      struct thermal_zone_device *tz, u32 *max_power);
+int power_actor_get_min_power(struct thermal_cooling_device *cdev,
+			      struct thermal_zone_device *tz, u32 *min_power);
+int power_actor_set_power(struct thermal_cooling_device *cdev,
+			  struct thermal_instance *ti, u32 power);
+/**
+ * struct thermal_trip - representation of a point in temperature domain
+ * @np: pointer to struct device_node that this trip point was created from
+ * @temperature: temperature value in miliCelsius
+ * @hysteresis: relative hysteresis in miliCelsius
+ * @type: trip point type
+ */
+struct thermal_trip {
+	struct device_node *np;
+	int temperature;
+	int hysteresis;
+	enum thermal_trip_type type;
+};
+
+int get_tz_trend(struct thermal_zone_device *tz, int trip);
+
+struct thermal_instance *
+get_thermal_instance(struct thermal_zone_device *tz,
+		     struct thermal_cooling_device *cdev,
+		     int trip);
+
 /*
  * This structure is used to describe the behavior of
  * a certain cooling device on a certain trip point
@@ -69,6 +118,9 @@ void thermal_zone_device_unbind_exception(struct thermal_zone_device *,
 int thermal_zone_device_set_policy(struct thermal_zone_device *, char *);
 int thermal_build_list_of_policies(char *buf);
 
+/* Helpers */
+void thermal_zone_set_trips(struct thermal_zone_device *tz);
+
 /* sysfs I/F */
 int thermal_zone_create_device_groups(struct thermal_zone_device *, int);
 void thermal_zone_destroy_device_groups(struct thermal_zone_device *);
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
index 2ba756af76b7..59eaf2d0fdb3 100644
--- a/drivers/thermal/thermal_helpers.c
+++ b/drivers/thermal/thermal_helpers.c
@@ -113,6 +113,18 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
 }
 EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
 
+/**
+ * thermal_zone_set_trips - Computes the next trip points for the driver
+ * @tz: a pointer to a thermal zone device structure
+ *
+ * The function computes the next temperature boundaries by browsing
+ * the trip points. The result is the closer low and high trip points
+ * to the current temperature. These values are passed to the backend
+ * driver to let it set its own notification mechanism (usually an
+ * interrupt).
+ *
+ * It does not return a value
+ */
 void thermal_zone_set_trips(struct thermal_zone_device *tz)
 {
 	int low = -INT_MAX;
@@ -161,7 +173,6 @@ void thermal_zone_set_trips(struct thermal_zone_device *tz)
 exit:
 	mutex_unlock(&tz->lock);
 }
-EXPORT_SYMBOL_GPL(thermal_zone_set_trips);
 
 void thermal_cdev_update(struct thermal_cooling_device *cdev)
 {
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 263b0420fbe4..ab19ceff6e2a 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -772,10 +772,9 @@ static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
 	int ret;
 
 	bgp->irq = platform_get_irq(pdev, 0);
-	if (bgp->irq < 0) {
-		dev_err(&pdev->dev, "get_irq failed\n");
+	if (bgp->irq < 0)
 		return bgp->irq;
-	}
+
 	ret = request_threaded_irq(bgp->irq, NULL,
 				   ti_bandgap_talert_irq_handler,
 				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
index fbbe32ca1e69..ffcc8c3459e5 100644
--- a/drivers/thunderbolt/icm.c
+++ b/drivers/thunderbolt/icm.c
@@ -1633,6 +1633,15 @@ static void icm_icl_rtd3_veto(struct tb *tb, const struct icm_pkg_header *hdr)
 		icm_veto_end(tb);
 }
 
+static bool icm_tgl_is_supported(struct tb *tb)
+{
+	/*
+	 * If the firmware is not running use software CM. This platform
+	 * should fully support both.
+	 */
+	return icm_firmware_running(tb->nhi);
+}
+
 static void icm_handle_notification(struct work_struct *work)
 {
 	struct icm_notification *n = container_of(work, typeof(*n), work);
@@ -2269,6 +2278,19 @@ struct tb *icm_probe(struct tb_nhi *nhi)
 		icm->rtd3_veto = icm_icl_rtd3_veto;
 		tb->cm_ops = &icm_icl_ops;
 		break;
+
+	case PCI_DEVICE_ID_INTEL_TGL_NHI0:
+	case PCI_DEVICE_ID_INTEL_TGL_NHI1:
+		icm->is_supported = icm_tgl_is_supported;
+		icm->driver_ready = icm_icl_driver_ready;
+		icm->set_uuid = icm_icl_set_uuid;
+		icm->device_connected = icm_icl_device_connected;
+		icm->device_disconnected = icm_tr_device_disconnected;
+		icm->xdomain_connected = icm_tr_xdomain_connected;
+		icm->xdomain_disconnected = icm_tr_xdomain_disconnected;
+		icm->rtd3_veto = icm_icl_rtd3_veto;
+		tb->cm_ops = &icm_icl_ops;
+		break;
 	}
 
 	if (!icm->is_supported || !icm->is_supported(tb)) {
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index 1be491ecbb45..2e51d06e8e8d 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -1270,6 +1270,10 @@ static struct pci_device_id nhi_ids[] = {
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICL_NHI1),
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL_NHI0),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL_NHI1),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 
 	/* Any USB4 compliant host */
 	{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_USB4, ~0) },
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index 5d276ee9b38e..80162e4b013f 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -73,6 +73,8 @@ extern const struct tb_nhi_ops icl_nhi_ops;
 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE	0x15ef
 #define PCI_DEVICE_ID_INTEL_ICL_NHI1			0x8a0d
 #define PCI_DEVICE_ID_INTEL_ICL_NHI0			0x8a17
+#define PCI_DEVICE_ID_INTEL_TGL_NHI0			0x9a1b
+#define PCI_DEVICE_ID_INTEL_TGL_NHI1			0x9a1d
 
 #define PCI_CLASS_SERIAL_USB_USB4			0x0c0340
 
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index a2ce99051c51..1ba4050f68ac 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -348,12 +348,6 @@ static int tb_switch_nvm_read(void *priv, unsigned int offset, void *val,
 	return ret;
 }
 
-static int tb_switch_nvm_no_read(void *priv, unsigned int offset, void *val,
-				 size_t bytes)
-{
-	return -EPERM;
-}
-
 static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val,
 			       size_t bytes)
 {
@@ -399,7 +393,6 @@ static struct nvmem_device *register_nvmem(struct tb_switch *sw, int id,
 		config.read_only = true;
 	} else {
 		config.name = "nvm_non_active";
-		config.reg_read = tb_switch_nvm_no_read;
 		config.reg_write = tb_switch_nvm_write;
 		config.root_only = true;
 	}
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index 3d084cec136f..50c7534ba31e 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -182,6 +182,9 @@ static int usb4_switch_op(struct tb_switch *sw, u16 opcode, u8 *status)
 		return ret;
 
 	ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_26, 1);
+	if (ret)
+		return ret;
+
 	if (val & ROUTER_CS_26_ONS)
 		return -EOPNOTSUPP;
 
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 31b7e1b03749..d1b27b0522a3 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -88,7 +88,7 @@ config HVC_DCC
 
 config HVC_RISCV_SBI
 	bool "RISC-V SBI console support"
-	depends on RISCV_SBI
+	depends on RISCV_SBI_V01
 	select HVC_DRIVER
 	help
 	  This enables support for console output via RISC-V SBI calls, which
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 436cc51c92c3..ebe26fe5ac09 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -75,6 +75,8 @@ static LIST_HEAD(hvc_structs);
  */
 static DEFINE_MUTEX(hvc_structs_mutex);
 
+/* Mutex to serialize hvc_open */
+static DEFINE_MUTEX(hvc_open_mutex);
 /*
  * This value is used to assign a tty->index value to a hvc_struct based
  * upon order of exposure via hvc_probe(), when we can not match it to
@@ -346,16 +348,24 @@ static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)
  */
 static int hvc_open(struct tty_struct *tty, struct file * filp)
 {
-	struct hvc_struct *hp = tty->driver_data;
+	struct hvc_struct *hp;
 	unsigned long flags;
 	int rc = 0;
 
+	mutex_lock(&hvc_open_mutex);
+
+	hp = tty->driver_data;
+	if (!hp) {
+		rc = -EIO;
+		goto out;
+	}
+
 	spin_lock_irqsave(&hp->port.lock, flags);
 	/* Check and then increment for fast path open. */
 	if (hp->port.count++ > 0) {
 		spin_unlock_irqrestore(&hp->port.lock, flags);
 		hvc_kick();
-		return 0;
+		goto out;
 	} /* else count == 0 */
 	spin_unlock_irqrestore(&hp->port.lock, flags);
 
@@ -384,6 +394,8 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	/* Force wakeup of the polling thread */
 	hvc_kick();
 
+out:
+	mutex_unlock(&hvc_open_mutex);
 	return rc;
 }
 
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index ee0604cd9c6b..55105ac38f89 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -196,8 +196,6 @@ module_param(hvcs_parm_num_devs, int, 0);
 
 static const char hvcs_driver_name[] = "hvcs";
 static const char hvcs_device_node[] = "hvcs";
-static const char hvcs_driver_string[]
-	= "IBM hvcs (Hypervisor Virtual Console Server) Driver";
 
 /* Status of partner info rescan triggered via sysfs. */
 static int hvcs_rescan_status;
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index e2138e7d5dc6..2540b2e4c8e8 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1885,7 +1885,7 @@ static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
  */
 static __init int register_PCI(int i, struct pci_dev *dev)
 {
-	int num_aiops, aiop, max_num_aiops, num_chan, chan;
+	int num_aiops, aiop, max_num_aiops, chan;
 	unsigned int aiopio[MAX_AIOPS_PER_BOARD];
 	CONTROLLER_t *ctlp;
 
@@ -2157,8 +2157,7 @@ static __init int register_PCI(int i, struct pci_dev *dev)
 	/*  Reset the AIOPIC, init the serial ports */
 	for (aiop = 0; aiop < num_aiops; aiop++) {
 		sResetAiopByNum(ctlp, aiop);
-		num_chan = ports_per_aiop;
-		for (chan = 0; chan < num_chan; chan++)
+		for (chan = 0; chan < ports_per_aiop; chan++)
 			init_r_port(i, aiop, chan, dev);
 	}
 
@@ -2166,11 +2165,10 @@ static __init int register_PCI(int i, struct pci_dev *dev)
 	if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) ||
 	    (rcktpt_type[i] == ROCKET_TYPE_MODEMII) ||
 	    (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) {
-		num_chan = ports_per_aiop;
-		for (chan = 0; chan < num_chan; chan++)
+		for (chan = 0; chan < ports_per_aiop; chan++)
 			sPCIModemReset(ctlp, chan, 1);
 		msleep(500);
-		for (chan = 0; chan < num_chan; chan++)
+		for (chan = 0; chan < ports_per_aiop; chan++)
 			sPCIModemReset(ctlp, chan, 0);
 		msleep(500);
 		rmSpeakerReset(ctlp, rocketModel[i].model);
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index c8186a05a453..e3d10794dbba 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -440,7 +440,7 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
 static int simple_config(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
-	int i = -ENODEV, try;
+	int ret, try;
 
 	/*
 	 * First pass: look for a config entry that looks normal.
@@ -472,8 +472,8 @@ static int simple_config(struct pcmcia_device *link)
 	if (info->quirk && info->quirk->config)
 		info->quirk->config(link);
 
-	i = pcmcia_enable_device(link);
-	if (i != 0)
+	ret = pcmcia_enable_device(link);
+	if (ret != 0)
 		return -1;
 	return setup_serial(link, info, link->resource[0]->start, link->irq);
 }
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0aea76cd67ff..adf9e80e7dc9 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -86,7 +86,7 @@ config SERIAL_EARLYCON_ARM_SEMIHOST
 
 config SERIAL_EARLYCON_RISCV_SBI
 	bool "Early console using RISC-V SBI"
-	depends on RISCV_SBI
+	depends on RISCV_SBI_V01
 	select SERIAL_CORE
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 5d41075964f2..6a9909e56449 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1231,9 +1231,7 @@ static void lpuart_dma_rx_free(struct uart_port *port)
 					struct lpuart_port, port);
 	struct dma_chan *chan = sport->dma_rx_chan;
 
-	if (chan)
-		dmaengine_terminate_all(chan);
-
+	dmaengine_terminate_all(chan);
 	dma_unmap_sg(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE);
 	kfree(sport->rx_ring.buf);
 	sport->rx_ring.tail = 0;
@@ -1514,17 +1512,17 @@ static void lpuart_request_dma(struct lpuart_port *sport)
 {
 	sport->dma_tx_chan = dma_request_chan(sport->port.dev, "tx");
 	if (IS_ERR(sport->dma_tx_chan)) {
-		dev_info_once(sport->port.dev,
-			      "DMA tx channel request failed, operating without tx DMA (%ld)\n",
-			      PTR_ERR(sport->dma_tx_chan));
+		dev_dbg_once(sport->port.dev,
+			     "DMA tx channel request failed, operating without tx DMA (%ld)\n",
+			     PTR_ERR(sport->dma_tx_chan));
 		sport->dma_tx_chan = NULL;
 	}
 
 	sport->dma_rx_chan = dma_request_chan(sport->port.dev, "rx");
 	if (IS_ERR(sport->dma_rx_chan)) {
-		dev_info_once(sport->port.dev,
-			      "DMA rx channel request failed, operating without rx DMA (%ld)\n",
-			      PTR_ERR(sport->dma_rx_chan));
+		dev_dbg_once(sport->port.dev,
+			     "DMA rx channel request failed, operating without rx DMA (%ld)\n",
+			     PTR_ERR(sport->dma_rx_chan));
 		sport->dma_rx_chan = NULL;
 	}
 }
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index 9a836dcac157..b5898c932036 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -23,7 +23,6 @@
 #include <linux/nmi.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/sizes.h>
 #include <linux/soc/nxp/lpc32xx-misc.h>
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index f7d6b3c9ea45..c71c1a2266dc 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -33,8 +33,7 @@
 #include <linux/pm_wakeirq.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/platform_data/serial-omap.h>
 
 #define OMAP_MAX_HSUART_PORTS	10
@@ -153,7 +152,7 @@ struct uart_omap_port {
 	u32			errata;
 	u32			features;
 
-	int			rts_gpio;
+	struct gpio_desc	*rts_gpiod;
 
 	struct pm_qos_request	pm_qos_request;
 	u32			latency;
@@ -303,11 +302,11 @@ static void serial_omap_stop_tx(struct uart_port *port)
 			serial_out(up, UART_OMAP_SCR, up->scr);
 			res = (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) ?
 				1 : 0;
-			if (gpio_get_value(up->rts_gpio) != res) {
+			if (gpiod_get_value(up->rts_gpiod) != res) {
 				if (port->rs485.delay_rts_after_send > 0)
 					mdelay(
 					port->rs485.delay_rts_after_send);
-				gpio_set_value(up->rts_gpio, res);
+				gpiod_set_value(up->rts_gpiod, res);
 			}
 		} else {
 			/* We're asked to stop, but there's still stuff in the
@@ -412,8 +411,8 @@ static void serial_omap_start_tx(struct uart_port *port)
 
 		/* if rts not already enabled */
 		res = (port->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0;
-		if (gpio_get_value(up->rts_gpio) != res) {
-			gpio_set_value(up->rts_gpio, res);
+		if (gpiod_get_value(up->rts_gpiod) != res) {
+			gpiod_set_value(up->rts_gpiod, res);
 			if (port->rs485.delay_rts_before_send > 0)
 				mdelay(port->rs485.delay_rts_before_send);
 		}
@@ -1414,12 +1413,12 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
 	 * Just as a precaution, only allow rs485
 	 * to be enabled if the gpio pin is valid
 	 */
-	if (gpio_is_valid(up->rts_gpio)) {
+	if (up->rts_gpiod) {
 		/* enable / disable rts */
 		val = (port->rs485.flags & SER_RS485_ENABLED) ?
 			SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND;
 		val = (port->rs485.flags & val) ? 1 : 0;
-		gpio_set_value(up->rts_gpio, val);
+		gpiod_set_value(up->rts_gpiod, val);
 	} else
 		port->rs485.flags &= ~SER_RS485_ENABLED;
 
@@ -1596,13 +1595,15 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
 }
 
 static int serial_omap_probe_rs485(struct uart_omap_port *up,
-				   struct device_node *np)
+				   struct device *dev)
 {
 	struct serial_rs485 *rs485conf = &up->port.rs485;
+	struct device_node *np = dev->of_node;
+	enum gpiod_flags gflags;
 	int ret;
 
 	rs485conf->flags = 0;
-	up->rts_gpio = -EINVAL;
+	up->rts_gpiod = NULL;
 
 	if (!np)
 		return 0;
@@ -1618,19 +1619,20 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 	}
 
 	/* check for tx enable gpio */
-	up->rts_gpio = of_get_named_gpio(np, "rts-gpio", 0);
-	if (gpio_is_valid(up->rts_gpio)) {
-		ret = devm_gpio_request(up->dev, up->rts_gpio, "omap-serial");
-		if (ret < 0)
+	gflags = rs485conf->flags & SER_RS485_RTS_AFTER_SEND ?
+		GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	up->rts_gpiod = devm_gpiod_get_optional(dev, "rts", gflags);
+	if (IS_ERR(up->rts_gpiod)) {
+		ret = PTR_ERR(up->rts_gpiod);
+	        if (ret == -EPROBE_DEFER)
 			return ret;
-		ret = rs485conf->flags & SER_RS485_RTS_AFTER_SEND ? 1 : 0;
-		ret = gpio_direction_output(up->rts_gpio, ret);
-		if (ret < 0)
-			return ret;
-	} else if (up->rts_gpio == -EPROBE_DEFER) {
-		return -EPROBE_DEFER;
+		/*
+		 * FIXME: the code historically ignored any other error than
+		 * -EPROBE_DEFER and just went on without GPIO.
+		 */
+		up->rts_gpiod = NULL;
 	} else {
-		up->rts_gpio = -EINVAL;
+		gpiod_set_consumer_name(up->rts_gpiod, "omap-serial");
 	}
 
 	return 0;
@@ -1703,7 +1705,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 		dev_info(up->port.dev, "no wakeirq for uart%d\n",
 			 up->port.line);
 
-	ret = serial_omap_probe_rs485(up, pdev->dev.of_node);
+	ret = serial_omap_probe_rs485(up, &pdev->dev);
 	if (ret < 0)
 		goto err_rs485;
 
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index e1179e74a2b8..bb000b8f44cc 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1352,7 +1352,7 @@ static int sci_dma_rx_submit(struct sci_port *s, bool port_lock_held)
 {
 	struct dma_chan *chan = s->chan_rx;
 	struct uart_port *port = &s->port;
-	unsigned long flags;
+	unsigned long uninitialized_var(flags);
 	int i;
 
 	for (i = 0; i < 2; i++) {
@@ -2972,10 +2972,7 @@ static int sci_init_single(struct platform_device *dev,
 	port->fifosize		= sci_port->params->fifosize;
 
 	if (port->type == PORT_SCI) {
-		if (sci_port->reg_size >= 0x20)
-			port->regshift = 2;
-		else
-			port->regshift = 1;
+		port->regshift = sci_port->reg_size >> 4;
 	}
 
 	/*
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 0b9e804e61a9..c0dfe4382898 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -2,7 +2,6 @@
 #include <linux/bitops.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 
 #define SCI_MAJOR		204
 #define SCI_MINOR_START		8
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index ac137b6a1dc1..672cfa075e28 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1235,9 +1235,7 @@ static void cdns_uart_console_write(struct console *co, const char *s,
 	writel(ctrl, port->membase + CDNS_UART_CR);
 
 	uart_console_write(port, s, count, cdns_uart_console_putchar);
-	while ((readl(port->membase + CDNS_UART_SR) &
-			(CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE)) !=
-			CDNS_UART_SR_TXEMPTY)
+	while (cdns_uart_tx_empty(port) != TIOCSER_TEMT)
 		cpu_relax();
 
 	/* restore interrupt state */
@@ -1262,6 +1260,7 @@ static int cdns_uart_console_setup(struct console *co, char *options)
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
+	unsigned long time_out;
 
 	if (!port->membase) {
 		pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
@@ -1272,6 +1271,13 @@ static int cdns_uart_console_setup(struct console *co, char *options)
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 
+	/* Wait for tx_empty before setting up the console */
+	time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
+
+	while (time_before(jiffies, time_out) &&
+	       cdns_uart_tx_empty(port) != TIOCSER_TEMT)
+		cpu_relax();
+
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 0dc3878794fd..bb958bbb7077 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -233,7 +233,7 @@ static void showacpu(void *dummy)
 
 	raw_spin_lock_irqsave(&show_lock, flags);
 	pr_info("CPU%d:\n", smp_processor_id());
-	show_stack(NULL, NULL);
+	show_stack(NULL, NULL, KERN_INFO);
 	raw_spin_unlock_irqrestore(&show_lock, flags);
 }
 
diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c
index d2a1e1228c82..9ffd42e333b8 100644
--- a/drivers/tty/vcc.c
+++ b/drivers/tty/vcc.c
@@ -605,6 +605,7 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	port->index = vcc_table_add(port);
 	if (port->index == -1) {
 		pr_err("VCC: no more TTY indices left for allocation\n");
+		rv = -ENOMEM;
 		goto free_ldc;
 	}
 
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 15d33fa0c925..0262bc23eca2 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -633,6 +633,8 @@ static void k_spec(struct vc_data *vc, unsigned char value, char up_flag)
 	     kbd->kbdmode == VC_OFF) &&
 	     value != KVAL(K_SAK))
 		return;		/* SAK is allowed even in raw mode */
+	if (IS_ENABLED(CONFIG_TWIST_DISABLE_KBD_K_SPEC_HANDLER))
+		return;
 	fn_handler[value](vc);
 }
 
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index d54a549c5892..31bb3647a99c 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -185,47 +185,54 @@ int set_selection_user(const struct tiocl_selection __user *sel,
 	return set_selection_kernel(&v, tty);
 }
 
-static int __set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
+static int vc_selection_store_chars(struct vc_data *vc, bool unicode)
 {
-	struct vc_data *vc = vc_cons[fg_console].d;
-	int new_sel_start, new_sel_end, spc;
 	char *bp, *obp;
-	int i, ps, pe;
-	u32 c;
-	int ret = 0;
-	bool unicode;
-
-	poke_blanked_console();
-
-	v->xs = min_t(u16, v->xs - 1, vc->vc_cols - 1);
-	v->ys = min_t(u16, v->ys - 1, vc->vc_rows - 1);
-	v->xe = min_t(u16, v->xe - 1, vc->vc_cols - 1);
-	v->ye = min_t(u16, v->ye - 1, vc->vc_rows - 1);
-	ps = v->ys * vc->vc_size_row + (v->xs << 1);
-	pe = v->ye * vc->vc_size_row + (v->xe << 1);
+	unsigned int i;
 
-	if (v->sel_mode == TIOCL_SELCLEAR) {
-		/* useful for screendump without selection highlights */
+	/* Allocate a new buffer before freeing the old one ... */
+	/* chars can take up to 4 bytes with unicode */
+	bp = kmalloc_array((vc_sel.end - vc_sel.start) / 2 + 1, unicode ? 4 : 1,
+			   GFP_KERNEL);
+	if (!bp) {
+		printk(KERN_WARNING "selection: kmalloc() failed\n");
 		clear_selection();
-		return 0;
+		return -ENOMEM;
 	}
+	kfree(vc_sel.buffer);
+	vc_sel.buffer = bp;
 
-	if (mouse_reporting() && (v->sel_mode & TIOCL_SELMOUSEREPORT)) {
-		mouse_report(tty, v->sel_mode & TIOCL_SELBUTTONMASK, v->xs,
-			     v->ys);
-		return 0;
+	obp = bp;
+	for (i = vc_sel.start; i <= vc_sel.end; i += 2) {
+		u32 c = sel_pos(i, unicode);
+		if (unicode)
+			bp += store_utf8(c, bp);
+		else
+			*bp++ = c;
+		if (!isspace(c))
+			obp = bp;
+		if (!((i + 2) % vc->vc_size_row)) {
+			/* strip trailing blanks from line and add newline,
+			   unless non-space at end of line. */
+			if (obp != bp) {
+				bp = obp;
+				*bp++ = '\r';
+			}
+			obp = bp;
+		}
 	}
+	vc_sel.buf_len = bp - vc_sel.buffer;
 
-	if (ps > pe)	/* make vc_sel.start <= vc_sel.end */
-		swap(ps, pe);
+	return 0;
+}
 
-	if (vc_sel.cons != vc_cons[fg_console].d) {
-		clear_selection();
-		vc_sel.cons = vc_cons[fg_console].d;
-	}
-	unicode = vt_do_kdgkbmode(fg_console) == K_UNICODE;
+static int vc_do_selection(struct vc_data *vc, unsigned short mode, int ps,
+		int pe)
+{
+	int new_sel_start, new_sel_end, spc;
+	bool unicode = vt_do_kdgkbmode(fg_console) == K_UNICODE;
 
-	switch (v->sel_mode) {
+	switch (mode) {
 	case TIOCL_SELCHAR:	/* character-by-character selection */
 		new_sel_start = ps;
 		new_sel_end = pe;
@@ -303,40 +310,44 @@ static int __set_selection_kernel(struct tiocl_selection *v, struct tty_struct *
 	vc_sel.start = new_sel_start;
 	vc_sel.end = new_sel_end;
 
-	/* Allocate a new buffer before freeing the old one ... */
-	/* chars can take up to 4 bytes with unicode */
-	bp = kmalloc_array((vc_sel.end - vc_sel.start) / 2 + 1, unicode ? 4 : 1,
-			   GFP_KERNEL);
-	if (!bp) {
-		printk(KERN_WARNING "selection: kmalloc() failed\n");
+	return vc_selection_store_chars(vc, unicode);
+}
+
+static int vc_selection(struct vc_data *vc, struct tiocl_selection *v,
+		struct tty_struct *tty)
+{
+	int ps, pe;
+
+	poke_blanked_console();
+
+	if (v->sel_mode == TIOCL_SELCLEAR) {
+		/* useful for screendump without selection highlights */
 		clear_selection();
-		return -ENOMEM;
+		return 0;
 	}
-	kfree(vc_sel.buffer);
-	vc_sel.buffer = bp;
 
-	obp = bp;
-	for (i = vc_sel.start; i <= vc_sel.end; i += 2) {
-		c = sel_pos(i, unicode);
-		if (unicode)
-			bp += store_utf8(c, bp);
-		else
-			*bp++ = c;
-		if (!isspace(c))
-			obp = bp;
-		if (! ((i + 2) % vc->vc_size_row)) {
-			/* strip trailing blanks from line and add newline,
-			   unless non-space at end of line. */
-			if (obp != bp) {
-				bp = obp;
-				*bp++ = '\r';
-			}
-			obp = bp;
-		}
+	v->xs = min_t(u16, v->xs - 1, vc->vc_cols - 1);
+	v->ys = min_t(u16, v->ys - 1, vc->vc_rows - 1);
+	v->xe = min_t(u16, v->xe - 1, vc->vc_cols - 1);
+	v->ye = min_t(u16, v->ye - 1, vc->vc_rows - 1);
+
+	if (mouse_reporting() && (v->sel_mode & TIOCL_SELMOUSEREPORT)) {
+		mouse_report(tty, v->sel_mode & TIOCL_SELBUTTONMASK, v->xs,
+			     v->ys);
+		return 0;
 	}
-	vc_sel.buf_len = bp - vc_sel.buffer;
 
-	return ret;
+	ps = v->ys * vc->vc_size_row + (v->xs << 1);
+	pe = v->ye * vc->vc_size_row + (v->xe << 1);
+	if (ps > pe)	/* make vc_sel.start <= vc_sel.end */
+		swap(ps, pe);
+
+	if (vc_sel.cons != vc) {
+		clear_selection();
+		vc_sel.cons = vc;
+	}
+
+	return vc_do_selection(vc, v->sel_mode, ps, pe);
 }
 
 int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
@@ -345,7 +356,7 @@ int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
 
 	mutex_lock(&vc_sel.lock);
 	console_lock();
-	ret = __set_selection_kernel(v, tty);
+	ret = vc_selection(vc_cons[fg_console].d, v, tty);
 	console_unlock();
 	mutex_unlock(&vc_sel.lock);
 
diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
index 4aafba20f450..19bbb5b7e6b6 100644
--- a/drivers/usb/cdns3/core.c
+++ b/drivers/usb/cdns3/core.c
@@ -82,8 +82,6 @@ static void cdns3_exit_roles(struct cdns3 *cdns)
 	cdns3_drd_exit(cdns);
 }
 
-static enum usb_role cdsn3_hw_role_state_machine(struct cdns3 *cdns);
-
 /**
  * cdns3_core_init_role - initialize role of operation
  * @cdns: Pointer to cdns3 structure
@@ -193,12 +191,12 @@ static int cdns3_core_init_role(struct cdns3 *cdns)
 }
 
 /**
- * cdsn3_hw_role_state_machine  - role switch state machine based on hw events.
+ * cdns3_hw_role_state_machine  - role switch state machine based on hw events.
  * @cdns: Pointer to controller structure.
  *
  * Returns next role to be entered based on hw events.
  */
-static enum usb_role cdsn3_hw_role_state_machine(struct cdns3 *cdns)
+static enum usb_role cdns3_hw_role_state_machine(struct cdns3 *cdns)
 {
 	enum usb_role role;
 	int id, vbus;
@@ -291,14 +289,10 @@ int cdns3_hw_role_switch(struct cdns3 *cdns)
 	enum usb_role real_role, current_role;
 	int ret = 0;
 
-	/* Do nothing if role based on syfs. */
-	if (cdns->role_override)
-		return 0;
-
 	pm_runtime_get_sync(cdns->dev);
 
 	current_role = cdns->role;
-	real_role = cdsn3_hw_role_state_machine(cdns);
+	real_role = cdns3_hw_role_state_machine(cdns);
 
 	/* Do nothing if nothing changed */
 	if (current_role == real_role)
@@ -353,39 +347,6 @@ static int cdns3_role_set(struct usb_role_switch *sw, enum usb_role role)
 
 	pm_runtime_get_sync(cdns->dev);
 
-	/*
-	 * FIXME: switch role framework should be extended to meet
-	 * requirements. Driver assumes that role can be controlled
-	 * by SW or HW. Temporary workaround is to use USB_ROLE_NONE to
-	 * switch from SW to HW control.
-	 *
-	 * For dr_mode == USB_DR_MODE_OTG:
-	 *	if user sets USB_ROLE_HOST or USB_ROLE_DEVICE then driver
-	 *	sets role_override flag and forces that role.
-	 *	if user sets USB_ROLE_NONE, driver clears role_override and lets
-	 *	HW state machine take over.
-	 *
-	 * For dr_mode != USB_DR_MODE_OTG:
-	 *	Assumptions:
-	 *	1. Restricted user control between NONE and dr_mode.
-	 *	2. Driver doesn't need to rely on role_override flag.
-	 *	3. Driver needs to ensure that HW state machine is never called
-	 *	   if dr_mode != USB_DR_MODE_OTG.
-	 */
-	if (role == USB_ROLE_NONE)
-		cdns->role_override = 0;
-	else
-		cdns->role_override = 1;
-
-	/*
-	 * HW state might have changed so driver need to trigger
-	 * HW state machine if dr_mode == USB_DR_MODE_OTG.
-	 */
-	if (!cdns->role_override && cdns->dr_mode == USB_DR_MODE_OTG) {
-		cdns3_hw_role_switch(cdns);
-		goto pm_put;
-	}
-
 	if (cdns->role == role)
 		goto pm_put;
 
@@ -528,6 +489,8 @@ static int cdns3_probe(struct platform_device *pdev)
 	sw_desc.get = cdns3_role_get;
 	sw_desc.allow_userspace_control = true;
 	sw_desc.driver_data = cdns;
+	if (device_property_read_bool(dev, "usb-role-switch"))
+		sw_desc.fwnode = dev->fwnode;
 
 	cdns->role_sw = usb_role_switch_register(dev, &sw_desc);
 	if (IS_ERR(cdns->role_sw)) {
diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
index 969eb94de204..1ad1f1fe61e9 100644
--- a/drivers/usb/cdns3/core.h
+++ b/drivers/usb/cdns3/core.h
@@ -62,7 +62,6 @@ struct cdns3_role_driver {
  *           This field based on firmware setting, kernel configuration
  *           and hardware configuration.
  * @role_sw: pointer to role switch object.
- * @role_override: set 1 if role rely on SW.
  */
 struct cdns3 {
 	struct device			*dev;
@@ -90,7 +89,6 @@ struct cdns3 {
 	struct mutex			mutex;
 	enum usb_dr_mode		dr_mode;
 	struct usb_role_switch		*role_sw;
-	int				role_override;
 };
 
 int cdns3_hw_role_switch(struct cdns3 *cdns);
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
index 16ad485f0b69..58089841ed52 100644
--- a/drivers/usb/cdns3/drd.c
+++ b/drivers/usb/cdns3/drd.c
@@ -329,7 +329,7 @@ int cdns3_drd_init(struct cdns3 *cdns)
 		cdns->otg_v1_regs = NULL;
 		cdns->otg_regs = regs;
 		writel(1, &cdns->otg_v0_regs->simulate);
-		dev_info(cdns->dev, "DRD version v0 (%08x)\n",
+		dev_dbg(cdns->dev, "DRD version v0 (%08x)\n",
 			 readl(&cdns->otg_v0_regs->version));
 	} else {
 		cdns->otg_v0_regs = NULL;
@@ -337,7 +337,7 @@ int cdns3_drd_init(struct cdns3 *cdns)
 		cdns->otg_regs = (void *)&cdns->otg_v1_regs->cmd;
 		cdns->version  = CDNS3_CONTROLLER_V1;
 		writel(1, &cdns->otg_v1_regs->simulate);
-		dev_info(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
+		dev_dbg(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
 			 readl(&cdns->otg_v1_regs->did),
 			 readl(&cdns->otg_v1_regs->rid));
 	}
diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index 372460ea4df9..8af1983cc10d 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -82,7 +82,7 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
  * @ptr: address of device controller register to be read and changed
  * @mask: bits requested to clar
  */
-void cdns3_clear_register_bit(void __iomem *ptr, u32 mask)
+static void cdns3_clear_register_bit(void __iomem *ptr, u32 mask)
 {
 	mask = readl(ptr) & ~mask;
 	writel(mask, ptr);
@@ -137,7 +137,7 @@ struct usb_request *cdns3_next_request(struct list_head *list)
  *
  * Returns buffer or NULL if no buffers in list
  */
-struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
+static struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
 {
 	return list_first_entry_or_null(list, struct cdns3_aligned_buf, list);
 }
@@ -148,7 +148,7 @@ struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
  *
  * Returns request or NULL if no requests in list
  */
-struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
+static struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
 {
 	return list_first_entry_or_null(list, struct cdns3_request, list);
 }
@@ -190,7 +190,7 @@ dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
 	return priv_ep->trb_pool_dma + offset;
 }
 
-int cdns3_ring_size(struct cdns3_endpoint *priv_ep)
+static int cdns3_ring_size(struct cdns3_endpoint *priv_ep)
 {
 	switch (priv_ep->type) {
 	case USB_ENDPOINT_XFER_ISOC:
@@ -345,7 +345,7 @@ static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep)
 	cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs);
 }
 
-void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req)
+static void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req)
 {
 	struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
 	int current_trb = priv_req->start_trb;
@@ -511,7 +511,7 @@ static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
 	}
 }
 
-struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
+static struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
 					      struct cdns3_endpoint *priv_ep,
 					      struct cdns3_request *priv_req)
 {
@@ -551,7 +551,7 @@ struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
 	return &priv_req->request;
 }
 
-int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev,
+static int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev,
 			      struct cdns3_endpoint *priv_ep,
 			      struct cdns3_request *priv_req)
 {
@@ -836,7 +836,7 @@ void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
 		cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
 }
 
-void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
+static void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
 {
 	/* Work around for stale data address in TRB*/
 	if (priv_ep->wa1_set) {
@@ -1904,7 +1904,7 @@ static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev,
 	return 0;
 }
 
-void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev,
+static void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev,
 			      struct cdns3_endpoint *priv_ep)
 {
 	if (!priv_ep->use_streams || priv_dev->gadget.speed < USB_SPEED_SUPER)
@@ -1925,7 +1925,7 @@ void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev,
 			       EP_CFG_TDL_CHK | EP_CFG_SID_CHK);
 }
 
-void cdns3_configure_dmult(struct cdns3_device *priv_dev,
+static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
 			   struct cdns3_endpoint *priv_ep)
 {
 	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
@@ -2965,7 +2965,7 @@ static int cdns3_init_eps(struct cdns3_device *priv_dev)
 
 		priv_ep->flags = 0;
 
-		dev_info(priv_dev->dev, "Initialized  %s support: %s %s\n",
+		dev_dbg(priv_dev->dev, "Initialized  %s support: %s %s\n",
 			 priv_ep->name,
 			 priv_ep->endpoint.caps.type_bulk ? "BULK, INT" : "",
 			 priv_ep->endpoint.caps.type_iso ? "ISO" : "");
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index d53db520e209..8bafcfc6080d 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -18,17 +18,6 @@ config USB_CHIPIDEA
 
 if USB_CHIPIDEA
 
-config USB_CHIPIDEA_OF
-	tristate
-	depends on OF
-	default USB_CHIPIDEA
-
-config USB_CHIPIDEA_PCI
-	tristate
-	depends on USB_PCI
-	depends on NOP_USB_XCEIV
-	default USB_CHIPIDEA
-
 config USB_CHIPIDEA_UDC
 	bool "ChipIdea device controller"
 	depends on USB_GADGET
@@ -43,4 +32,30 @@ config USB_CHIPIDEA_HOST
 	help
 	  Say Y here to enable host controller functionality of the
 	  ChipIdea driver.
+
+config USB_CHIPIDEA_PCI
+	tristate "Enable PCI glue driver" if EMBEDDED
+	depends on USB_PCI
+	depends on NOP_USB_XCEIV
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_MSM
+	tristate "Enable MSM hsusb glue driver" if EMBEDDED
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_IMX
+	tristate "Enable i.MX USB glue driver" if EMBEDDED
+	depends on OF
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_GENERIC
+	tristate "Enable generic USB2 glue driver" if EMBEDDED
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_TEGRA
+	tristate "Enable Tegra UDC glue driver" if EMBEDDED
+	depends on OF
+	depends on USB_CHIPIDEA_UDC
+	default USB_CHIPIDEA
+
 endif
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 12df94f78f72..fae779a23866 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -8,11 +8,8 @@ ci_hdrc-$(CONFIG_USB_OTG_FSM)		+= otg_fsm.o
 
 # Glue/Bridge layers go here
 
-obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_usb2.o
-obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_msm.o
-obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_zevio.o
-
-obj-$(CONFIG_USB_CHIPIDEA_PCI)	+= ci_hdrc_pci.o
-
-obj-$(CONFIG_USB_CHIPIDEA_OF)	+= usbmisc_imx.o ci_hdrc_imx.o
-obj-$(CONFIG_USB_CHIPIDEA_OF)	+= ci_hdrc_tegra.o
+obj-$(CONFIG_USB_CHIPIDEA_GENERIC)	+= ci_hdrc_usb2.o
+obj-$(CONFIG_USB_CHIPIDEA_MSM)		+= ci_hdrc_msm.o
+obj-$(CONFIG_USB_CHIPIDEA_PCI)		+= ci_hdrc_pci.o
+obj-$(CONFIG_USB_CHIPIDEA_IMX)		+= ci_hdrc_imx.o usbmisc_imx.o
+obj-$(CONFIG_USB_CHIPIDEA_TEGRA)	+= ci_hdrc_tegra.o
diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
index c044fba463e4..89e1d82d739b 100644
--- a/drivers/usb/chipidea/ci_hdrc_usb2.c
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -28,13 +28,19 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
 	.flags		= CI_HDRC_DISABLE_STREAMING,
 };
 
-static struct ci_hdrc_platform_data ci_zynq_pdata = {
+static const struct ci_hdrc_platform_data ci_zynq_pdata = {
 	.capoffset	= DEF_CAPOFFSET,
 };
 
+static const struct ci_hdrc_platform_data ci_zevio_pdata = {
+	.capoffset	= DEF_CAPOFFSET,
+	.flags		= CI_HDRC_REGS_SHARED | CI_HDRC_FORCE_FULLSPEED,
+};
+
 static const struct of_device_id ci_hdrc_usb2_of_match[] = {
-	{ .compatible = "chipidea,usb2"},
-	{ .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
+	{ .compatible = "chipidea,usb2" },
+	{ .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata },
+	{ .compatible = "lsi,zevio-usb", .data = &ci_zevio_pdata },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
@@ -64,13 +70,14 @@ static int ci_hdrc_usb2_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	priv->clk = devm_clk_get(dev, NULL);
-	if (!IS_ERR(priv->clk)) {
-		ret = clk_prepare_enable(priv->clk);
-		if (ret) {
-			dev_err(dev, "failed to enable the clock: %d\n", ret);
-			return ret;
-		}
+	priv->clk = devm_clk_get_optional(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable the clock: %d\n", ret);
+		return ret;
 	}
 
 	ci_pdata->name = dev_name(dev);
@@ -94,8 +101,7 @@ static int ci_hdrc_usb2_probe(struct platform_device *pdev)
 	return 0;
 
 clk_err:
-	if (!IS_ERR(priv->clk))
-		clk_disable_unprepare(priv->clk);
+	clk_disable_unprepare(priv->clk);
 	return ret;
 }
 
diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c
deleted file mode 100644
index e1634da4a4b1..000000000000
--- a/drivers/usb/chipidea/ci_hdrc_zevio.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * Based off drivers/usb/chipidea/ci_hdrc_msm.c
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/chipidea.h>
-
-#include "ci.h"
-
-static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = {
-	.name			= "ci_hdrc_zevio",
-	.flags			= CI_HDRC_REGS_SHARED | CI_HDRC_FORCE_FULLSPEED,
-	.capoffset		= DEF_CAPOFFSET,
-};
-
-static int ci_hdrc_zevio_probe(struct platform_device *pdev)
-{
-	struct platform_device *ci_pdev;
-
-	dev_dbg(&pdev->dev, "ci_hdrc_zevio_probe\n");
-
-	ci_pdev = ci_hdrc_add_device(&pdev->dev,
-				pdev->resource, pdev->num_resources,
-				&ci_hdrc_zevio_platdata);
-
-	if (IS_ERR(ci_pdev)) {
-		dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
-		return PTR_ERR(ci_pdev);
-	}
-
-	platform_set_drvdata(pdev, ci_pdev);
-
-	return 0;
-}
-
-static int ci_hdrc_zevio_remove(struct platform_device *pdev)
-{
-	struct platform_device *ci_pdev = platform_get_drvdata(pdev);
-
-	ci_hdrc_remove_device(ci_pdev);
-
-	return 0;
-}
-
-static const struct of_device_id ci_hdrc_zevio_dt_ids[] = {
-	{ .compatible = "lsi,zevio-usb", },
-	{ /* sentinel */ }
-};
-
-static struct platform_driver ci_hdrc_zevio_driver = {
-	.probe = ci_hdrc_zevio_probe,
-	.remove = ci_hdrc_zevio_remove,
-	.driver = {
-		.name = "zevio_usb",
-		.of_match_table = ci_hdrc_zevio_dt_ids,
-	},
-};
-
-MODULE_DEVICE_TABLE(of, ci_hdrc_zevio_dt_ids);
-module_platform_driver(ci_hdrc_zevio_driver);
-
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index ae0bdc036464..ea8ac4a54a8d 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -3,42 +3,16 @@
  * core.c - ChipIdea USB IP core family device controller
  *
  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2020 NXP
  *
  * Author: David Lopo
- */
-
-/*
- * Description: ChipIdea USB IP core family device controller
- *
- * This driver is composed of several blocks:
- * - HW:     hardware interface
- * - DBG:    debug facilities (optional)
- * - UTIL:   utilities
- * - ISR:    interrupts handling
- * - ENDPT:  endpoint operations (Gadget API)
- * - GADGET: gadget operations (Gadget API)
- * - BUS:    bus glue code, bus abstraction layer
- *
- * Compile Options
- * - STALL_IN:  non-empty bulk-in pipes cannot be halted
- *              if defined mass storage compliance succeeds but with warnings
- *              => case 4: Hi >  Dn
- *              => case 5: Hi >  Di
- *              => case 8: Hi <> Do
- *              if undefined usbtest 13 fails
- * - TRACE:     enable function tracing (depends on DEBUG)
- *
- * Main Features
- * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
- * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
- * - Normal & LPM support
- *
- * USBTEST Report
- * - OK: 0-12, 13 (STALL_IN defined) & 14
- * - Not Supported: 15 & 16 (ISO)
+ *	   Peter Chen <peter.chen@nxp.com>
  *
- * TODO List
- * - Suspend & Remote Wakeup
+ * Main Features:
+ * - Four transfers are supported, usbtest is passed
+ * - USB Certification for gadget: CH9 and Mass Storage are passed
+ * - Low power mode
+ * - USB wakeup
  */
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -272,7 +246,7 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
 	ci->rev = ci_get_revision(ci);
 
 	dev_dbg(ci->dev,
-		"ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
+		"revision: %d, lpm: %d; cap: %px op: %px\n",
 		ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
 
 	/* setup lock mode ? */
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
index ebb11b625bb8..32b56f84f77a 100644
--- a/drivers/usb/chipidea/udc.h
+++ b/drivers/usb/chipidea/udc.h
@@ -67,10 +67,7 @@ struct td_node {
  * struct ci_hw_req - usb request representation
  * @req: request structure for gadget drivers
  * @queue: link to QH list
- * @ptr: transfer descriptor for this request
- * @dma: dma address for the transfer descriptor
- * @zptr: transfer descriptor for the zero packet
- * @zdma: dma address of the zero packet's transfer descriptor
+ * @tds: link to TD list
  */
 struct ci_hw_req {
 	struct usb_request	req;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index aa45840d8273..de624c47e190 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -31,6 +31,7 @@
 #include <linux/types.h>
 #include <linux/genalloc.h>
 #include <linux/io.h>
+#include <linux/kcov.h>
 
 #include <linux/phy/phy.h>
 #include <linux/usb.h>
@@ -1645,7 +1646,9 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
 
 	/* pass ownership to the completion handler */
 	urb->status = status;
+	kcov_remote_start_usb((u64)urb->dev->bus->busnum);
 	urb->complete(urb);
+	kcov_remote_stop();
 
 	usb_anchor_resume_wakeups(anchor);
 	atomic_dec(&urb->use_count);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2b6565c06c23..8d2f49e92524 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -92,7 +92,7 @@ module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(old_scheme_first,
 		 "start with the old device initialization scheme");
 
-static bool use_both_schemes = 1;
+static bool use_both_schemes = true;
 module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(use_both_schemes,
 		"try the other device initialization scheme if the "
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index a97dd1ba964e..73f4482d833a 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * usb hub driver head file
  *
diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h
index 2ae90158ded7..fdd4897401e2 100644
--- a/drivers/usb/core/otg_whitelist.h
+++ b/drivers/usb/core/otg_whitelist.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * drivers/usb/core/otg_whitelist.h
  *
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 9f4320b9d7fc..a2ca38e25e0c 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -1262,8 +1262,10 @@ void usb_create_sysfs_intf_files(struct usb_interface *intf)
 
 	if (!alt->string && !(udev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
 		alt->string = usb_cache_string(udev, alt->desc.iInterface);
-	if (alt->string && device_create_file(&intf->dev, &dev_attr_interface))
-		;	/* We don't actually care if the function fails. */
+	if (alt->string && device_create_file(&intf->dev, &dev_attr_interface)) {
+		/* This is not a serious error */
+		dev_dbg(&intf->dev, "interface string descriptor file not created\n");
+	}
 	intf->sysfs_files_created = 1;
 }
 
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 64ed4023a8c8..19e4c550bc73 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Released under the GPLv2 only.
  */
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 99b0bdfe0012..668d1ad646a4 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
 /*
  * core.h - DesignWare HS OTG Controller common declarations
  *
diff --git a/drivers/usb/dwc2/debug.h b/drivers/usb/dwc2/debug.h
index a8c565b6bc34..47252c56d410 100644
--- a/drivers/usb/dwc2/debug.h
+++ b/drivers/usb/dwc2/debug.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * debug.h - Designware USB2 DRD controller debug header
  *
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index 1224fa9df604..ea02ee63ac6d 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
 /*
  * hcd.h - DesignWare HS OTG Controller host-mode declarations
  *
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index c4027bbcedec..864b76a0b954 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
 /*
  * hw.h - DesignWare HS OTG Controller hardware definitions
  *
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index 171280c80228..04ba11fff0ed 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -18,7 +18,6 @@
 #include <asm/fixmap.h>
 #include <linux/bcd.h>
 #include <linux/export.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
diff --git a/drivers/usb/early/xhci-dbc.h b/drivers/usb/early/xhci-dbc.h
index 6e2b7266a695..8b4d71de45fc 100644
--- a/drivers/usb/early/xhci-dbc.h
+++ b/drivers/usb/early/xhci-dbc.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * xhci-dbc.h - xHCI debug capability early driver
  *
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 10f01f974f67..12294a122f6e 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -32,7 +32,7 @@
 #include <linux/usb/functionfs.h>
 
 #include <linux/aio.h>
-#include <linux/mmu_context.h>
+#include <linux/kthread.h>
 #include <linux/poll.h>
 #include <linux/eventfd.h>
 
@@ -824,13 +824,9 @@ static void ffs_user_copy_worker(struct work_struct *work)
 	bool kiocb_has_eventfd = io_data->kiocb->ki_flags & IOCB_EVENTFD;
 
 	if (io_data->read && ret > 0) {
-		mm_segment_t oldfs = get_fs();
-
-		set_fs(USER_DS);
-		use_mm(io_data->mm);
+		kthread_use_mm(io_data->mm);
 		ret = ffs_copy_to_iter(io_data->buf, ret, &io_data->data);
-		unuse_mm(io_data->mm);
-		set_fs(oldfs);
+		kthread_unuse_mm(io_data->mm);
 	}
 
 	io_data->kiocb->ki_complete(io_data->kiocb, ret, ret);
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index aa0de9e35afa..9ee0bfe7bcda 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -21,7 +21,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/poll.h>
-#include <linux/mmu_context.h>
+#include <linux/kthread.h>
 #include <linux/aio.h>
 #include <linux/uio.h>
 #include <linux/refcount.h>
@@ -462,9 +462,9 @@ static void ep_user_copy_worker(struct work_struct *work)
 	struct kiocb *iocb = priv->iocb;
 	size_t ret;
 
-	use_mm(mm);
+	kthread_use_mm(mm);
 	ret = copy_to_iter(priv->buf, priv->actual, &priv->to);
-	unuse_mm(mm);
+	kthread_unuse_mm(mm);
 	if (!ret)
 		ret = -EFAULT;
 
@@ -1361,7 +1361,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 
 	req->buf = dev->rbuf;
 	req->context = NULL;
-	value = -EOPNOTSUPP;
 	switch (ctrl->bRequest) {
 
 	case USB_REQ_GET_DESCRIPTOR:
@@ -1784,7 +1783,7 @@ static ssize_t
 dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 {
 	struct dev_data		*dev = fd->private_data;
-	ssize_t			value = len, length = len;
+	ssize_t			value, length = len;
 	unsigned		total;
 	u32			tag;
 	char			*kbuf;
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index aaf975c809bf..7164ad9800f1 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -48,7 +48,6 @@
 #define	DRIVER_DESC	"Aeroflex Gaisler GRUSBDC USB Peripheral Controller"
 
 static const char driver_name[] = DRIVER_NAME;
-static const char driver_desc[] = DRIVER_DESC;
 
 #define gr_read32(x) (ioread32be((x)))
 #define gr_write32(x, v) (iowrite32be((v), (x)))
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 9d18c6e6ab27..c95341d472f4 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc.
  * Copyright (c) 2005 MontaVista Software
  */
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 10d51daa6a1b..e077b2ca53c5 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -480,7 +480,6 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (!irq) {
-		dev_err(&pdev->dev, "Failed to get IRQ\n");
 		err = -ENODEV;
 		goto cleanup_phy;
 	}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 229b3de319e6..eabf22a78eae 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2001-2002 by David Brownell
  */
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 2ce5031d866d..81fbc019a9b3 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
diff --git a/drivers/usb/host/imx21-hcd.h b/drivers/usb/host/imx21-hcd.h
index 7b9cf0a38d6e..96d16752a73e 100644
--- a/drivers/usb/host/imx21-hcd.h
+++ b/drivers/usb/host/imx21-hcd.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Macros and prototypes for i.MX21
  *
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 27c26ca10bfd..b85a39588f9d 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-1.0+
+/* SPDX-License-Identifier: GPL-1.0+ */
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index beb2efa71341..92150ecdb036 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -205,7 +205,7 @@ static void usb_amd_find_chipset_info(void)
 {
 	unsigned long flags;
 	struct amd_chipset_info info;
-	info.need_pll_quirk = 0;
+	info.need_pll_quirk = false;
 
 	spin_lock_irqsave(&amd_lock, flags);
 
@@ -229,10 +229,10 @@ static void usb_amd_find_chipset_info(void)
 	case AMD_CHIPSET_SB800:
 	case AMD_CHIPSET_HUDSON2:
 	case AMD_CHIPSET_BOLTON:
-		info.need_pll_quirk = 1;
+		info.need_pll_quirk = true;
 		break;
 	default:
-		info.need_pll_quirk = 0;
+		info.need_pll_quirk = false;
 		break;
 	}
 
@@ -529,7 +529,7 @@ void usb_amd_dev_put(void)
 	amd_chipset.nb_type = 0;
 	memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type));
 	amd_chipset.isoc_reqs = 0;
-	amd_chipset.need_pll_quirk = 0;
+	amd_chipset.need_pll_quirk = false;
 
 	spin_unlock_irqrestore(&amd_lock, flags);
 
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 51973a923526..ab081475c113 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * R8A66597 HCD (Host Controller Driver)
  *
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index e9209e3e6248..995bc52d2d22 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -81,7 +81,6 @@ static DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
 static struct mutex u132_module_lock;
 static int u132_exiting;
 static int u132_instances;
-static struct list_head u132_static_list;
 /*
 * end of the global variables protected by u132_module_lock
 */
@@ -177,7 +176,6 @@ struct u132_ring {
 };
 struct u132 {
 	struct kref kref;
-	struct list_head u132_list;
 	struct mutex sw_lock;
 	struct mutex scheduler_lock;
 	struct u132_platform_data *board;
@@ -254,7 +252,6 @@ static void u132_hcd_delete(struct kref *kref)
 	struct usb_hcd *hcd = u132_to_hcd(u132);
 	u132->going += 1;
 	mutex_lock(&u132_module_lock);
-	list_del_init(&u132->u132_list);
 	u132_instances -= 1;
 	mutex_unlock(&u132_module_lock);
 	dev_warn(&u132->platform_dev->dev, "FREEING the hcd=%p and thus the u13"
@@ -3089,7 +3086,6 @@ static int u132_probe(struct platform_device *pdev)
 		retval = 0;
 		hcd->rsrc_start = 0;
 		mutex_lock(&u132_module_lock);
-		list_add_tail(&u132->u132_list, &u132_static_list);
 		u132->sequence_num = ++u132_instances;
 		mutex_unlock(&u132_module_lock);
 		u132_u132_init_kref(u132);
@@ -3192,7 +3188,6 @@ static struct platform_driver u132_platform_driver = {
 static int __init u132_hcd_init(void)
 {
 	int retval;
-	INIT_LIST_HEAD(&u132_static_list);
 	u132_instances = 0;
 	u132_exiting = 0;
 	mutex_init(&u132_module_lock);
@@ -3213,14 +3208,9 @@ static int __init u132_hcd_init(void)
 module_init(u132_hcd_init);
 static void __exit u132_hcd_exit(void)
 {
-	struct u132 *u132;
-	struct u132 *temp;
 	mutex_lock(&u132_module_lock);
 	u132_exiting += 1;
 	mutex_unlock(&u132_module_lock);
-	list_for_each_entry_safe(u132, temp, &u132_static_list, u132_list) {
-		platform_device_unregister(u132->platform_dev);
-	}
 	platform_driver_unregister(&u132_platform_driver);
 	printk(KERN_INFO "u132-hcd driver deregistered\n");
 	wait_event(u132_hcd_wait, u132_instances == 0);
diff --git a/drivers/usb/host/xhci-debugfs.h b/drivers/usb/host/xhci-debugfs.h
index f7a4e2492b00..56db635fcd6e 100644
--- a/drivers/usb/host/xhci-debugfs.h
+++ b/drivers/usb/host/xhci-debugfs.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * xhci-debugfs.h - xHCI debugfs interface
  *
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index 268328c20681..fa59b242cd51 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * xHCI host controller driver
  *
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index acd56517215a..a93cfe817904 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (c) 2015 MediaTek Inc.
  * Author:
diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h
index ca0a3a5721dd..3be021793cc8 100644
--- a/drivers/usb/host/xhci-mvebu.h
+++ b/drivers/usb/host/xhci-mvebu.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2014 Marvell
  *
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
index 5681723fc9cd..b49f6447bd3a 100644
--- a/drivers/usb/host/xhci-plat.h
+++ b/drivers/usb/host/xhci-plat.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * xhci-plat.h - xHCI host controller driver platform Bus Glue.
  *
diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h
index 012744a63a49..048ad3b8a6c7 100644
--- a/drivers/usb/host/xhci-rcar.h
+++ b/drivers/usb/host/xhci-rcar.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * drivers/usb/host/xhci-rcar.h
  *
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index b19582b2a72c..627abd236dbe 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * xHCI host controller driver
  *
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 86cfefdd6632..38fc2fe7a036 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 
 /*
  * xHCI host controller driver
diff --git a/drivers/usb/isp1760/isp1760-core.h b/drivers/usb/isp1760/isp1760-core.h
index 97cb4d7a3e1c..d9a0a4cc467c 100644
--- a/drivers/usb/isp1760/isp1760-core.h
+++ b/drivers/usb/isp1760/isp1760-core.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Driver for the NXP ISP1760 chip
  *
diff --git a/drivers/usb/isp1760/isp1760-regs.h b/drivers/usb/isp1760/isp1760-regs.h
index 1f00c3850cf7..fedc4f5cded0 100644
--- a/drivers/usb/isp1760/isp1760-regs.h
+++ b/drivers/usb/isp1760/isp1760-regs.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Driver for the NXP ISP1760 chip
  *
diff --git a/drivers/usb/isp1760/isp1760-udc.h b/drivers/usb/isp1760/isp1760-udc.h
index 2d0b88747701..d2df650d54e9 100644
--- a/drivers/usb/isp1760/isp1760-udc.h
+++ b/drivers/usb/isp1760/isp1760-udc.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Driver for the NXP ISP1761 device controller
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
index 8a5e6bb07d05..c0fb9e1c5361 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.h
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
 /*
  * sisusb - usb kernel driver for Net2280/SiS315 based USB2VGA dongles
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.h b/drivers/usb/misc/sisusbvga/sisusb_init.h
index ace09985dae4..aa33bc81ee52 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
 /* $XFree86$ */
 /* $XdotOrg$ */
 /*
diff --git a/drivers/usb/misc/sisusbvga/sisusb_struct.h b/drivers/usb/misc/sisusbvga/sisusb_struct.h
index 706d77090e00..3df64d2a9d43 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_struct.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_struct.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
 /*
  * General structure definitions for universal mode switching modules
  *
diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h
index 4bf77736914f..1584efbbd704 100644
--- a/drivers/usb/misc/usb_u132.h
+++ b/drivers/usb/misc/usb_u132.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
 * Common Header File for the Elan Digital Systems U132 adapter
 * this file should be included by both the "ftdi-u132" and
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 6087be236a35..d49db92ab26c 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * mtu3.h - MediaTek USB3 DRD header
  *
diff --git a/drivers/usb/mtu3/mtu3_debug.h b/drivers/usb/mtu3/mtu3_debug.h
index e96a69234d05..fb6b28277c9b 100644
--- a/drivers/usb/mtu3/mtu3_debug.h
+++ b/drivers/usb/mtu3/mtu3_debug.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * mtu3_debug.h - debug header
  *
diff --git a/drivers/usb/mtu3/mtu3_dr.h b/drivers/usb/mtu3/mtu3_dr.h
index 5e58c4dbd54a..760fe7d69c6b 100644
--- a/drivers/usb/mtu3/mtu3_dr.h
+++ b/drivers/usb/mtu3/mtu3_dr.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * mtu3_dr.h - dual role switch and host glue layer header
  *
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index 8382d066749e..bf34f784f84b 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * mtu3_hw_regs.h - MediaTek USB3 DRD register and field definitions
  *
diff --git a/drivers/usb/mtu3/mtu3_qmu.h b/drivers/usb/mtu3/mtu3_qmu.h
index 9cfde201db63..66e1c0ab5a99 100644
--- a/drivers/usb/mtu3/mtu3_qmu.h
+++ b/drivers/usb/mtu3/mtu3_qmu.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * mtu3_qmu.h - Queue Management Unit driver header
  *
diff --git a/drivers/usb/mtu3/mtu3_trace.h b/drivers/usb/mtu3/mtu3_trace.h
index 050e30f0fbd4..1b897636daf2 100644
--- a/drivers/usb/mtu3/mtu3_trace.h
+++ b/drivers/usb/mtu3/mtu3_trace.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /**
  * mtu3_trace.h - trace support
  *
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index e021485c83ae..c8e67d15b510 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2005-2006 by Texas Instruments
  */
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 290a2bc46606..dbe5623db1e0 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * MUSB OTG driver defines
  *
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
index c444a80fe1da..e5b3506c7b3f 100644
--- a/drivers/usb/musb/musb_debug.h
+++ b/drivers/usb/musb/musb_debug.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * MUSB OTG driver debug defines
  *
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 4b4d8dc5d3f2..7d67b69df0a0 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * MUSB OTG driver DMA controller abstraction
  *
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index d02663660813..f49f25b3bf56 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * MUSB OTG driver peripheral defines
  *
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 2999845632ce..32336571f05c 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * MUSB OTG driver host defines
  *
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index f17aabd95a50..12874d3b2a64 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * MUSB OTG driver register I/O
  *
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 5cd7264fc2cb..5fa110978f1a 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * MUSB OTG driver register defines
  *
diff --git a/drivers/usb/musb/musb_trace.h b/drivers/usb/musb/musb_trace.h
index b193daf69685..380ebc77eab1 100644
--- a/drivers/usb/musb/musb_trace.h
+++ b/drivers/usb/musb/musb_trace.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * musb_trace.h - MUSB Controller Trace Support
  *
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index 859008fa0e3c..939a0361ae88 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2005-2006 by Texas Instruments
  */
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
index fd8025bbece7..8a253564fb18 100644
--- a/drivers/usb/musb/tusb6010.h
+++ b/drivers/usb/musb/tusb6010.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
  *
diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
index 43d410f6641b..fbcc28ad9964 100644
--- a/drivers/usb/phy/phy-fsl-usb.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. */
 
 #include <linux/usb/otg-fsm.h>
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c
index 3ea1f5b9bcf8..8f62dc2a90ff 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/usb/phy/phy-jz4770.c
@@ -125,13 +125,13 @@ static int jz4770_phy_init(struct usb_phy *phy)
 
 	err = regulator_enable(priv->vcc_supply);
 	if (err) {
-		dev_err(priv->dev, "Unable to enable VCC: %d", err);
+		dev_err(priv->dev, "Unable to enable VCC: %d\n", err);
 		return err;
 	}
 
 	err = clk_prepare_enable(priv->clk);
 	if (err) {
-		dev_err(priv->dev, "Unable to start clock: %d", err);
+		dev_err(priv->dev, "Unable to start clock: %d\n", err);
 		return err;
 	}
 
@@ -191,7 +191,7 @@ static int jz4770_phy_probe(struct platform_device *pdev)
 
 	priv->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->base)) {
-		dev_err(dev, "Failed to map registers");
+		dev_err(dev, "Failed to map registers\n");
 		return PTR_ERR(priv->base);
 	}
 
@@ -199,7 +199,7 @@ static int jz4770_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->clk)) {
 		err = PTR_ERR(priv->clk);
 		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get clock");
+			dev_err(dev, "Failed to get clock\n");
 		return err;
 	}
 
@@ -207,14 +207,14 @@ static int jz4770_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->vcc_supply)) {
 		err = PTR_ERR(priv->vcc_supply);
 		if (err != -EPROBE_DEFER)
-			dev_err(dev, "failed to get regulator");
+			dev_err(dev, "Failed to get regulator\n");
 		return err;
 	}
 
 	err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
 	if (err) {
 		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Unable to register PHY");
+			dev_err(dev, "Unable to register PHY\n");
 		return err;
 	}
 
diff --git a/drivers/usb/phy/phy-mv-usb.h b/drivers/usb/phy/phy-mv-usb.h
index 96701a1229ad..5d5c0abb0c3a 100644
--- a/drivers/usb/phy/phy-mv-usb.h
+++ b/drivers/usb/phy/phy-mv-usb.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
  */
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index ef1735d014da..eb34d762a63d 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-1.0+
+/* SPDX-License-Identifier: GPL-1.0+ */
 /*
  * Renesas USB driver
  *
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
index c3d3cc35cee0..7d3700bf41d9 100644
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-1.0+
+/* SPDX-License-Identifier: GPL-1.0+ */
 /*
  * Renesas USB driver
  *
diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h
index 65dc19ca528e..56b7106d254d 100644
--- a/drivers/usb/renesas_usbhs/mod.h
+++ b/drivers/usb/renesas_usbhs/mod.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-1.0+
+/* SPDX-License-Identifier: GPL-1.0+ */
 /*
  * Renesas USB driver
  *
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 3b130529408b..a4ae9f97d9cd 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-1.0+
+/* SPDX-License-Identifier: GPL-1.0+ */
 /*
  * Renesas USB driver
  *
diff --git a/drivers/usb/renesas_usbhs/rcar2.h b/drivers/usb/renesas_usbhs/rcar2.h
index 7d88732c5bff..046d07edb36f 100644
--- a/drivers/usb/renesas_usbhs/rcar2.h
+++ b/drivers/usb/renesas_usbhs/rcar2.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 #include "common.h"
 
 extern const struct renesas_usbhs_platform_info usbhs_rcar_gen2_plat_info;
diff --git a/drivers/usb/renesas_usbhs/rcar3.h b/drivers/usb/renesas_usbhs/rcar3.h
index c7c5ec1e3af2..d13db30bd21b 100644
--- a/drivers/usb/renesas_usbhs/rcar3.h
+++ b/drivers/usb/renesas_usbhs/rcar3.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 #include "common.h"
 
 extern const struct renesas_usbhs_platform_info usbhs_rcar_gen3_plat_info;
diff --git a/drivers/usb/renesas_usbhs/rza.h b/drivers/usb/renesas_usbhs/rza.h
index 1ca42a6fd480..a29b75fef057 100644
--- a/drivers/usb/renesas_usbhs/rza.h
+++ b/drivers/usb/renesas_usbhs/rza.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 #include "common.h"
 
 extern const struct renesas_usbhs_platform_info usbhs_rza1_plat_info;
diff --git a/drivers/usb/serial/belkin_sa.h b/drivers/usb/serial/belkin_sa.h
index a13a98d284f2..89ec30c63cc6 100644
--- a/drivers/usb/serial/belkin_sa.h
+++ b/drivers/usb/serial/belkin_sa.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Definitions for Belkin USB Serial Adapter Driver
  *
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index ffd984142171..d63072fee099 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1138,8 +1138,8 @@ static void garmin_read_process(struct garmin_data *garmin_data_p,
 		   send it directly to the tty port */
 		if (garmin_data_p->flags & FLAGS_QUEUING) {
 			pkt_add(garmin_data_p, data, data_length);
-		} else if (bulk_data ||
-			   getLayerId(data) == GARMIN_LAYERID_APPL) {
+		} else if (bulk_data || (data_length >= sizeof(u32) &&
+				getLayerId(data) == GARMIN_LAYERID_APPL)) {
 
 			spin_lock_irqsave(&garmin_data_p->lock, flags);
 			garmin_data_p->flags |= APP_RESP_SEEN;
diff --git a/drivers/usb/serial/io_16654.h b/drivers/usb/serial/io_16654.h
index 4980f72dc56f..f18501f056cf 100644
--- a/drivers/usb/serial/io_16654.h
+++ b/drivers/usb/serial/io_16654.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /************************************************************************
  *
  *	16654.H		Definitions for 16C654 UART used on EdgePorts
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index 2e7fedbaf2ff..43ba53a3a6fa 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /************************************************************************
  *
  *	io_edgeport.h	Edgeport Linux Interface definitions
diff --git a/drivers/usb/serial/io_ionsp.h b/drivers/usb/serial/io_ionsp.h
index 4b8e4823bd45..db4fce815c97 100644
--- a/drivers/usb/serial/io_ionsp.h
+++ b/drivers/usb/serial/io_ionsp.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /************************************************************************
  *
  *	IONSP.H		Definitions for I/O Networks Serial Protocol
diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h
index 9bbcee37524e..50b899d55ed0 100644
--- a/drivers/usb/serial/io_ti.h
+++ b/drivers/usb/serial/io_ti.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*****************************************************************************
  *
  *	Copyright (C) 1997-2002 Inside Out Networks, Inc.
diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h
index 0d1a5bb4636e..52cbc353051f 100644
--- a/drivers/usb/serial/io_usbvend.h
+++ b/drivers/usb/serial/io_usbvend.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /************************************************************************
  *
  *	USBVEND.H		Vendor-specific USB definitions
diff --git a/drivers/usb/serial/iuu_phoenix.h b/drivers/usb/serial/iuu_phoenix.h
index b400b262f72e..87992b24d904 100644
--- a/drivers/usb/serial/iuu_phoenix.h
+++ b/drivers/usb/serial/iuu_phoenix.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Infinity Unlimited USB Phoenix driver
  *
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 0084edf518e8..e3d09a83cab1 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Definitions for MCT (Magic Control Technology) USB-RS232 Converter Driver
  *
diff --git a/drivers/usb/serial/oti6858.h b/drivers/usb/serial/oti6858.h
index 1226bf2347eb..5c25836fdcd9 100644
--- a/drivers/usb/serial/oti6858.h
+++ b/drivers/usb/serial/oti6858.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
  */
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 52db5519aaf0..7d3090ee7e0c 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Prolific PL2303 USB to serial adaptor driver header file
  */
diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h
index 4bd69d047036..622d639ce74e 100644
--- a/drivers/usb/serial/visor.h
+++ b/drivers/usb/serial/visor.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * USB HandSpring Visor driver
  *
diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h
index 269e727a92f9..7e63074c9128 100644
--- a/drivers/usb/serial/whiteheat.h
+++ b/drivers/usb/serial/whiteheat.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * USB ConnectTech WhiteHEAT driver
  *
diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h
index 16ce06039a4d..a6505ceb6693 100644
--- a/drivers/usb/storage/debug.h
+++ b/drivers/usb/storage/debug.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Driver for USB Mass Storage compliant devices
  * Debugging Functions Header File
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 2dbf9c7d9749..dcd7b7e5eda8 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Header file for Special Initializers for certain USB Mass Storage devices
  *
diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h
index 072f1ffda2af..1d102463a66c 100644
--- a/drivers/usb/storage/protocol.h
+++ b/drivers/usb/storage/protocol.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Driver for USB Mass Storage compliant devices
  * Protocol Functions Header File
diff --git a/drivers/usb/storage/scsiglue.h b/drivers/usb/storage/scsiglue.h
index 2bc5ea045bf7..2a79c3ed4d86 100644
--- a/drivers/usb/storage/scsiglue.h
+++ b/drivers/usb/storage/scsiglue.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Driver for USB Mass Storage compliant devices
  * SCSI Connecting Glue Header File
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index fb3bb4ee4ccf..74ffd0d7e7b6 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Driver for USB Mass Storage compliant devices
  * Transport Functions Header File
diff --git a/drivers/usb/storage/unusual_alauda.h b/drivers/usb/storage/unusual_alauda.h
index 0ec8c99a4976..13f61ec88cde 100644
--- a/drivers/usb/storage/unusual_alauda.h
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for the Alauda-based card readers
  */
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index fb99e526cd48..0547daf116a2 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for devices based on the Cypress USB/ATA bridge
  *	with support for ATACB
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
index fdab5e7d68ca..5335b5d2bd79 100644
--- a/drivers/usb/storage/unusual_datafab.h
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for the Datafab USB Compact Flash reader
  */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index f6c3681fa2e9..b6a9a7451620 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Driver for USB Mass Storage compliant devices
  * Unusual Devices File
diff --git a/drivers/usb/storage/unusual_ene_ub6250.h b/drivers/usb/storage/unusual_ene_ub6250.h
index 9134b91fbd73..a3b32abc2b2f 100644
--- a/drivers/usb/storage/unusual_ene_ub6250.h
+++ b/drivers/usb/storage/unusual_ene_ub6250.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 #if defined(CONFIG_USB_STORAGE_ENE_UB6250) || \
 		defined(CONFIG_USB_STORAGE_ENE_UB6250_MODULE)
 
diff --git a/drivers/usb/storage/unusual_freecom.h b/drivers/usb/storage/unusual_freecom.h
index 949231c7a36b..9ca686364a93 100644
--- a/drivers/usb/storage/unusual_freecom.h
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for the Freecom USB/IDE adaptor
  */
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
index d03a02cc904e..f248190bd666 100644
--- a/drivers/usb/storage/unusual_isd200.h
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for In-System Design, Inc. ISD200 ASIC
  */
diff --git a/drivers/usb/storage/unusual_jumpshot.h b/drivers/usb/storage/unusual_jumpshot.h
index c323338881ef..44878f849c1c 100644
--- a/drivers/usb/storage/unusual_jumpshot.h
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
  */
diff --git a/drivers/usb/storage/unusual_karma.h b/drivers/usb/storage/unusual_karma.h
index 8f1eebd71d2c..9fbed4cbc895 100644
--- a/drivers/usb/storage/unusual_karma.h
+++ b/drivers/usb/storage/unusual_karma.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for the Rio Karma
  */
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
index c76d4e990f7b..cdfee8f6cf37 100644
--- a/drivers/usb/storage/unusual_onetouch.h
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for the Maxtor OneTouch USB hard drive's button
  */
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
index 7e14c2d7cf73..945dcb19d31d 100644
--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Driver for Realtek RTS51xx USB card reader
  *
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
index 650cf2862754..bfb650974129 100644
--- a/drivers/usb/storage/unusual_sddr09.h
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
  */
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
index e89df2cea7bd..6d6f76eb0630 100644
--- a/drivers/usb/storage/unusual_sddr55.h
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
  */
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 1b23741036ee..cfdec74e0f4a 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Driver for USB Attached SCSI devices - Unusual Devices File
  *
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
index 05abf6870b8f..f9d3e5efc39d 100644
--- a/drivers/usb/storage/unusual_usbat.h
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
  */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 5850d624cac7..0451fac1adce 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Driver for USB Mass Storage compliant devices
  * Main Header File
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index 77eb97b2aa86..a4dbd11f8ee2 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -11,7 +11,7 @@ config TYPEC_MUX_PI3USB30532
 
 config TYPEC_MUX_INTEL_PMC
 	tristate "Intel PMC mux control"
-	depends on INTEL_PMC_IPC
+	depends on INTEL_SCU_IPC
 	select USB_ROLE_SWITCH
 	help
 	  Driver for USB muxes controlled by Intel PMC FW. Intel PMC FW can
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index f5c5e0aef66f..fce255e28a00 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -15,7 +15,7 @@
 #include <linux/usb/typec_dp.h>
 #include <linux/usb/typec_tbt.h>
 
-#include <asm/intel_pmc_ipc.h>
+#include <asm/intel_scu_ipc.h>
 
 #define PMC_USBC_CMD		0xa7
 
@@ -96,6 +96,7 @@ struct pmc_usb_port {
 struct pmc_usb {
 	u8 num_ports;
 	struct device *dev;
+	struct intel_scu_ipc_dev *ipc;
 	struct pmc_usb_port *port;
 };
 
@@ -107,9 +108,8 @@ static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
 	 * Error bit will always be 0 with the USBC command.
 	 * Status can be checked from the response message.
 	 */
-	intel_pmc_ipc_command(PMC_USBC_CMD, 0, msg, len,
-			      (void *)response, 1);
-
+	intel_scu_ipc_dev_command(port->pmc->ipc, PMC_USBC_CMD, 0, msg, len,
+				  response, sizeof(response));
 	if (response[2]) {
 		if (response[2] & BIT(1))
 			return -EIO;
@@ -370,6 +370,10 @@ static int pmc_usb_probe(struct platform_device *pdev)
 	if (!pmc->port)
 		return -ENOMEM;
 
+	pmc->ipc = devm_intel_scu_ipc_dev_get(&pdev->dev);
+	if (!pmc->ipc)
+		return -ENODEV;
+
 	pmc->dev = &pdev->dev;
 
 	/*
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index 5b986d6c801d..fa3f39336246 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -41,8 +41,8 @@ config TYPEC_FUSB302
 config TYPEC_WCOVE
 	tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
 	depends on ACPI
+	depends on MFD_INTEL_PMC_BXT
 	depends on INTEL_SOC_PMIC
-	depends on INTEL_PMC_IPC
 	depends on BXT_WC_PMIC_OPREGION
 	help
 	  This driver adds support for USB Type-C on Intel Broxton platforms
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index b498960ff72b..b28facece43c 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -9,14 +9,13 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/extcon.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/proc_fs.h>
 #include <linux/regulator/consumer.h>
@@ -83,7 +82,7 @@ struct fusb302_chip {
 	struct work_struct irq_work;
 	bool irq_suspended;
 	bool irq_while_suspended;
-	int gpio_int_n;
+	struct gpio_desc *gpio_int_n;
 	int gpio_int_n_irq;
 	struct extcon_dev *extcon;
 
@@ -1618,30 +1617,17 @@ static void fusb302_irq_work(struct work_struct *work)
 
 static int init_gpio(struct fusb302_chip *chip)
 {
-	struct device_node *node;
+	struct device *dev = chip->dev;
 	int ret = 0;
 
-	node = chip->dev->of_node;
-	chip->gpio_int_n = of_get_named_gpio(node, "fcs,int_n", 0);
-	if (!gpio_is_valid(chip->gpio_int_n)) {
-		ret = chip->gpio_int_n;
-		dev_err(chip->dev, "cannot get named GPIO Int_N, ret=%d", ret);
-		return ret;
-	}
-	ret = devm_gpio_request(chip->dev, chip->gpio_int_n, "fcs,int_n");
-	if (ret < 0) {
-		dev_err(chip->dev, "cannot request GPIO Int_N, ret=%d", ret);
-		return ret;
-	}
-	ret = gpio_direction_input(chip->gpio_int_n);
-	if (ret < 0) {
-		dev_err(chip->dev,
-			"cannot set GPIO Int_N to input, ret=%d", ret);
-		return ret;
+	chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN);
+	if (IS_ERR(chip->gpio_int_n)) {
+		dev_err(dev, "failed to request gpio_int_n\n");
+		return PTR_ERR(chip->gpio_int_n);
 	}
-	ret = gpio_to_irq(chip->gpio_int_n);
+	ret = gpiod_to_irq(chip->gpio_int_n);
 	if (ret < 0) {
-		dev_err(chip->dev,
+		dev_err(dev,
 			"cannot request IRQ for GPIO Int_N, ret=%d", ret);
 		return ret;
 	}
diff --git a/drivers/usb/typec/tcpm/fusb302_reg.h b/drivers/usb/typec/tcpm/fusb302_reg.h
index 00b39d365478..edc0e4b0f1e6 100644
--- a/drivers/usb/typec/tcpm/fusb302_reg.h
+++ b/drivers/usb/typec/tcpm/fusb302_reg.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016-2017 Google, Inc
  *
diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
index b35e15a1f02c..8a8eb5cb8e0f 100644
--- a/drivers/usb/typec/ucsi/Makefile
+++ b/drivers/usb/typec/ucsi/Makefile
@@ -7,6 +7,10 @@ typec_ucsi-y				:= ucsi.o
 
 typec_ucsi-$(CONFIG_TRACING)		+= trace.o
 
+ifneq ($(CONFIG_POWER_SUPPLY),)
+	typec_ucsi-y			+= psy.o
+endif
+
 ifneq ($(CONFIG_TYPEC_DP_ALTMODE),)
 	typec_ucsi-y			+= displayport.o
 endif
diff --git a/drivers/usb/typec/ucsi/psy.c b/drivers/usb/typec/ucsi/psy.c
new file mode 100644
index 000000000000..26ed0b520749
--- /dev/null
+++ b/drivers/usb/typec/ucsi/psy.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power Supply for UCSI
+ *
+ * Copyright (C) 2020, Intel Corporation
+ * Author: K V, Abhilash <abhilash.k.v@intel.com>
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/property.h>
+#include <linux/usb/pd.h>
+
+#include "ucsi.h"
+
+/* Power Supply access to expose source power information */
+enum ucsi_psy_online_states {
+	UCSI_PSY_OFFLINE = 0,
+	UCSI_PSY_FIXED_ONLINE,
+	UCSI_PSY_PROG_ONLINE,
+};
+
+static enum power_supply_property ucsi_psy_props[] = {
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int ucsi_psy_get_online(struct ucsi_connector *con,
+			       union power_supply_propval *val)
+{
+	val->intval = UCSI_PSY_OFFLINE;
+	if (con->status.flags & UCSI_CONSTAT_CONNECTED &&
+	    (con->status.flags & UCSI_CONSTAT_PWR_DIR) == TYPEC_SINK)
+		val->intval = UCSI_PSY_FIXED_ONLINE;
+	return 0;
+}
+
+static int ucsi_psy_get_voltage_min(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	u32 pdo;
+
+	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
+	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		pdo = con->src_pdos[0];
+		val->intval = pdo_fixed_voltage(pdo) * 1000;
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+	case UCSI_CONSTAT_PWR_OPMODE_BC:
+	case UCSI_CONSTAT_PWR_OPMODE_DEFAULT:
+		val->intval = UCSI_TYPEC_VSAFE5V * 1000;
+		break;
+	default:
+		val->intval = 0;
+		break;
+	}
+	return 0;
+}
+
+static int ucsi_psy_get_voltage_max(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	u32 pdo;
+
+	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
+	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		if (con->num_pdos > 0) {
+			pdo = con->src_pdos[con->num_pdos - 1];
+			val->intval = pdo_fixed_voltage(pdo) * 1000;
+		} else {
+			val->intval = 0;
+		}
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+	case UCSI_CONSTAT_PWR_OPMODE_BC:
+	case UCSI_CONSTAT_PWR_OPMODE_DEFAULT:
+		val->intval = UCSI_TYPEC_VSAFE5V * 1000;
+		break;
+	default:
+		val->intval = 0;
+		break;
+	}
+	return 0;
+}
+
+static int ucsi_psy_get_voltage_now(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	int index;
+	u32 pdo;
+
+	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
+	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		index = rdo_index(con->rdo);
+		if (index > 0) {
+			pdo = con->src_pdos[index - 1];
+			val->intval = pdo_fixed_voltage(pdo) * 1000;
+		} else {
+			val->intval = 0;
+		}
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+	case UCSI_CONSTAT_PWR_OPMODE_BC:
+	case UCSI_CONSTAT_PWR_OPMODE_DEFAULT:
+		val->intval = UCSI_TYPEC_VSAFE5V * 1000;
+		break;
+	default:
+		val->intval = 0;
+		break;
+	}
+	return 0;
+}
+
+static int ucsi_psy_get_current_max(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	u32 pdo;
+
+	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
+	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		if (con->num_pdos > 0) {
+			pdo = con->src_pdos[con->num_pdos - 1];
+			val->intval = pdo_max_current(pdo) * 1000;
+		} else {
+			val->intval = 0;
+		}
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+		val->intval = UCSI_TYPEC_1_5_CURRENT * 1000;
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+		val->intval = UCSI_TYPEC_3_0_CURRENT * 1000;
+		break;
+	case UCSI_CONSTAT_PWR_OPMODE_BC:
+	case UCSI_CONSTAT_PWR_OPMODE_DEFAULT:
+	/* UCSI can't tell b/w DCP/CDP or USB2/3x1/3x2 SDP chargers */
+	default:
+		val->intval = 0;
+		break;
+	}
+	return 0;
+}
+
+static int ucsi_psy_get_current_now(struct ucsi_connector *con,
+				    union power_supply_propval *val)
+{
+	u16 flags = con->status.flags;
+
+	if (UCSI_CONSTAT_PWR_OPMODE(flags) == UCSI_CONSTAT_PWR_OPMODE_PD)
+		val->intval = rdo_op_current(con->rdo) * 1000;
+	else
+		val->intval = 0;
+	return 0;
+}
+
+static int ucsi_psy_get_usb_type(struct ucsi_connector *con,
+				 union power_supply_propval *val)
+{
+	u16 flags = con->status.flags;
+
+	val->intval = POWER_SUPPLY_USB_TYPE_C;
+	if (flags & UCSI_CONSTAT_CONNECTED &&
+	    UCSI_CONSTAT_PWR_OPMODE(flags) == UCSI_CONSTAT_PWR_OPMODE_PD)
+		val->intval = POWER_SUPPLY_USB_TYPE_PD;
+
+	return 0;
+}
+
+static int ucsi_psy_get_prop(struct power_supply *psy,
+			     enum power_supply_property psp,
+			     union power_supply_propval *val)
+{
+	struct ucsi_connector *con = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		return ucsi_psy_get_usb_type(con, val);
+	case POWER_SUPPLY_PROP_ONLINE:
+		return ucsi_psy_get_online(con, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		return ucsi_psy_get_voltage_min(con, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		return ucsi_psy_get_voltage_max(con, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		return ucsi_psy_get_voltage_now(con, val);
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		return ucsi_psy_get_current_max(con, val);
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		return ucsi_psy_get_current_now(con, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static enum power_supply_usb_type ucsi_psy_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_C,
+	POWER_SUPPLY_USB_TYPE_PD,
+	POWER_SUPPLY_USB_TYPE_PD_PPS,
+};
+
+int ucsi_register_port_psy(struct ucsi_connector *con)
+{
+	struct power_supply_config psy_cfg = {};
+	struct device *dev = con->ucsi->dev;
+	char *psy_name;
+
+	psy_cfg.drv_data = con;
+	psy_cfg.fwnode = dev_fwnode(dev);
+
+	psy_name = devm_kasprintf(dev, GFP_KERNEL, "ucsi-source-psy-%s%d",
+				  dev_name(dev), con->num);
+	if (!psy_name)
+		return -ENOMEM;
+
+	con->psy_desc.name = psy_name;
+	con->psy_desc.type = POWER_SUPPLY_TYPE_USB,
+	con->psy_desc.usb_types = ucsi_psy_usb_types;
+	con->psy_desc.num_usb_types = ARRAY_SIZE(ucsi_psy_usb_types);
+	con->psy_desc.properties = ucsi_psy_props,
+	con->psy_desc.num_properties = ARRAY_SIZE(ucsi_psy_props),
+	con->psy_desc.get_property = ucsi_psy_get_prop;
+
+	con->psy = power_supply_register(dev, &con->psy_desc, &psy_cfg);
+
+	return PTR_ERR_OR_ZERO(con->psy);
+}
+
+void ucsi_unregister_port_psy(struct ucsi_connector *con)
+{
+	if (IS_ERR_OR_NULL(con->psy))
+		return;
+
+	power_supply_unregister(con->psy);
+}
diff --git a/drivers/usb/typec/ucsi/trace.c b/drivers/usb/typec/ucsi/trace.c
index 48ad1dc1b1b2..cb62ad835761 100644
--- a/drivers/usb/typec/ucsi/trace.c
+++ b/drivers/usb/typec/ucsi/trace.c
@@ -35,16 +35,16 @@ const char *ucsi_cmd_str(u64 raw_cmd)
 
 const char *ucsi_cci_str(u32 cci)
 {
-	if (cci & GENMASK(7, 0)) {
-		if (cci & BIT(29))
+	if (UCSI_CCI_CONNECTOR(cci)) {
+		if (cci & UCSI_CCI_ACK_COMPLETE)
 			return "Event pending (ACK completed)";
-		if (cci & BIT(31))
+		if (cci & UCSI_CCI_COMMAND_COMPLETE)
 			return "Event pending (command completed)";
 		return "Connector Change";
 	}
-	if (cci & BIT(29))
+	if (cci & UCSI_CCI_ACK_COMPLETE)
 		return "ACK completed";
-	if (cci & BIT(31))
+	if (cci & UCSI_CCI_COMMAND_COMPLETE)
 		return "Command completed";
 
 	return "";
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index ddf2ad3752de..d0c63afaf345 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -492,19 +492,45 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
 	}
 }
 
+static void ucsi_get_pdos(struct ucsi_connector *con, int is_partner)
+{
+	struct ucsi *ucsi = con->ucsi;
+	u64 command;
+	int ret;
+
+	command = UCSI_COMMAND(UCSI_GET_PDOS) | UCSI_CONNECTOR_NUMBER(con->num);
+	command |= UCSI_GET_PDOS_PARTNER_PDO(is_partner);
+	command |= UCSI_GET_PDOS_NUM_PDOS(UCSI_MAX_PDOS - 1);
+	command |= UCSI_GET_PDOS_SRC_PDOS;
+	ret = ucsi_run_command(ucsi, command, con->src_pdos,
+			       sizeof(con->src_pdos));
+	if (ret < 0) {
+		dev_err(ucsi->dev, "UCSI_GET_PDOS failed (%d)\n", ret);
+		return;
+	}
+	con->num_pdos = ret / sizeof(u32); /* number of bytes to 32-bit PDOs */
+	if (ret == 0)
+		dev_warn(ucsi->dev, "UCSI_GET_PDOS returned 0 bytes\n");
+}
+
 static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
 {
 	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
 	case UCSI_CONSTAT_PWR_OPMODE_PD:
+		con->rdo = con->status.request_data_obj;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_PD);
+		ucsi_get_pdos(con, 1);
 		break;
 	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
+		con->rdo = 0;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_1_5A);
 		break;
 	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
+		con->rdo = 0;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_3_0A);
 		break;
 	default:
+		con->rdo = 0;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_USB);
 		break;
 	}
@@ -566,6 +592,8 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 
 	switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
 	case UCSI_CONSTAT_PARTNER_TYPE_UFP:
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
 		typec_set_data_role(con->port, TYPEC_HOST);
 		break;
 	case UCSI_CONSTAT_PARTNER_TYPE_DFP:
@@ -611,7 +639,8 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 
 	role = !!(con->status.flags & UCSI_CONSTAT_PWR_DIR);
 
-	if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE)
+	if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE ||
+	    con->status.change & UCSI_CONSTAT_POWER_LEVEL_CHANGE)
 		ucsi_pwr_opmode_change(con);
 
 	if (con->status.change & UCSI_CONSTAT_POWER_DIR_CHANGE) {
@@ -627,6 +656,8 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 
 		switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
 		case UCSI_CONSTAT_PARTNER_TYPE_UFP:
+		case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
+		case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
 			typec_set_data_role(con->port, TYPEC_HOST);
 			break;
 		case UCSI_CONSTAT_PARTNER_TYPE_DFP:
@@ -905,6 +936,10 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 	cap->driver_data = con;
 	cap->ops = &ucsi_ops;
 
+	ret = ucsi_register_port_psy(con);
+	if (ret)
+		return ret;
+
 	/* Register the connector */
 	con->port = typec_register_port(ucsi->dev, cap);
 	if (IS_ERR(con->port))
@@ -927,6 +962,8 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 
 	switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
 	case UCSI_CONSTAT_PARTNER_TYPE_UFP:
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
 		typec_set_data_role(con->port, TYPEC_HOST);
 		break;
 	case UCSI_CONSTAT_PARTNER_TYPE_DFP:
@@ -1029,6 +1066,7 @@ int ucsi_init(struct ucsi *ucsi)
 	for (con = ucsi->connector; con->port; con++) {
 		ucsi_unregister_partner(con);
 		ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
+		ucsi_unregister_port_psy(con);
 		typec_unregister_port(con->port);
 		con->port = NULL;
 	}
@@ -1152,6 +1190,7 @@ void ucsi_unregister(struct ucsi *ucsi)
 		ucsi_unregister_partner(&ucsi->connector[i]);
 		ucsi_unregister_altmodes(&ucsi->connector[i],
 					 UCSI_RECIPIENT_CON);
+		ucsi_unregister_port_psy(&ucsi->connector[i]);
 		typec_unregister_port(ucsi->connector[i].port);
 	}
 
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 8e831108f481..cba6f77bea61 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -5,6 +5,7 @@
 
 #include <linux/bitops.h>
 #include <linux/device.h>
+#include <linux/power_supply.h>
 #include <linux/types.h>
 #include <linux/usb/typec.h>
 
@@ -21,7 +22,7 @@ struct ucsi_altmode;
 #define UCSI_MESSAGE_OUT		32
 
 /* Command Status and Connector Change Indication (CCI) bits */
-#define UCSI_CCI_CONNECTOR(_c_)		(((_c_) & GENMASK(7, 0)) >> 1)
+#define UCSI_CCI_CONNECTOR(_c_)		(((_c_) & GENMASK(7, 1)) >> 1)
 #define UCSI_CCI_LENGTH(_c_)		(((_c_) & GENMASK(15, 8)) >> 8)
 #define UCSI_CCI_NOT_SUPPORTED		BIT(25)
 #define UCSI_CCI_CANCEL_COMPLETE	BIT(26)
@@ -130,6 +131,11 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
 #define UCSI_GET_ALTMODE_OFFSET(_r_)		((u64)(_r_) << 32)
 #define UCSI_GET_ALTMODE_NUM_ALTMODES(_r_)	((u64)(_r_) << 40)
 
+/* GET_PDOS command bits */
+#define UCSI_GET_PDOS_PARTNER_PDO(_r_)		((u64)(_r_) << 23)
+#define UCSI_GET_PDOS_NUM_PDOS(_r_)		((u64)(_r_) << 32)
+#define UCSI_GET_PDOS_SRC_PDOS			((u64)1 << 34)
+
 /* -------------------------------------------------------------------------- */
 
 /* Error information returned by PPM in response to GET_ERROR_STATUS command. */
@@ -294,6 +300,11 @@ struct ucsi {
 
 #define UCSI_MAX_SVID		5
 #define UCSI_MAX_ALTMODES	(UCSI_MAX_SVID * 6)
+#define UCSI_MAX_PDOS		(4)
+
+#define UCSI_TYPEC_VSAFE5V	5000
+#define UCSI_TYPEC_1_5_CURRENT	1500
+#define UCSI_TYPEC_3_0_CURRENT	3000
 
 struct ucsi_connector {
 	int num;
@@ -313,6 +324,11 @@ struct ucsi_connector {
 
 	struct ucsi_connector_status status;
 	struct ucsi_connector_capability cap;
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	u32 rdo;
+	u32 src_pdos[UCSI_MAX_PDOS];
+	int num_pdos;
 };
 
 int ucsi_send_command(struct ucsi *ucsi, u64 command,
@@ -321,6 +337,14 @@ int ucsi_send_command(struct ucsi *ucsi, u64 command,
 void ucsi_altmode_update_active(struct ucsi_connector *con);
 int ucsi_resume(struct ucsi *ucsi);
 
+#if IS_ENABLED(CONFIG_POWER_SUPPLY)
+int ucsi_register_port_psy(struct ucsi_connector *con);
+void ucsi_unregister_port_psy(struct ucsi_connector *con);
+#else
+static inline int ucsi_register_port_psy(struct ucsi_connector *con) { return 0; }
+static inline void ucsi_unregister_port_psy(struct ucsi_connector *con) { }
+#endif /* CONFIG_POWER_SUPPLY */
+
 #if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE)
 struct typec_altmode *
 ucsi_register_displayport(struct ucsi_connector *con,
diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
index e8140065c8a5..3e1ceb8e9f2b 100644
--- a/drivers/vdpa/Kconfig
+++ b/drivers/vdpa/Kconfig
@@ -10,7 +10,7 @@ if VDPA
 
 config VDPA_SIM
 	tristate "vDPA device simulator"
-	depends on RUNTIME_TESTING_MENU && HAS_DMA && VHOST_DPN
+	depends on RUNTIME_TESTING_MENU && HAS_DMA
 	select VHOST_RING
 	default n
 	help
diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index 85b32c325282..a0c60f895b24 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -27,7 +27,7 @@
 #include <linux/iommu.h>
 #include <linux/module.h>
 #include <linux/mm.h>
-#include <linux/mmu_context.h>
+#include <linux/kthread.h>
 #include <linux/rbtree.h>
 #include <linux/sched/signal.h>
 #include <linux/sched/mm.h>
@@ -342,8 +342,8 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr,
 	vma = find_vma_intersection(mm, vaddr, vaddr + 1);
 
 	if (vma && vma->vm_flags & VM_PFNMAP) {
-		*pfn = ((vaddr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
-		if (is_invalid_reserved_pfn(*pfn))
+		if (!follow_pfn(vma, vaddr, pfn) &&
+		    is_invalid_reserved_pfn(*pfn))
 			ret = 0;
 	}
 done:
@@ -555,7 +555,7 @@ static int vfio_iommu_type1_pin_pages(void *iommu_data,
 			continue;
 		}
 
-		remote_vaddr = dma->vaddr + iova - dma->iova;
+		remote_vaddr = dma->vaddr + (iova - dma->iova);
 		ret = vfio_pin_page_external(dma, remote_vaddr, &phys_pfn[i],
 					     do_accounting);
 		if (ret)
@@ -2333,7 +2333,7 @@ static int vfio_iommu_type1_dma_rw_chunk(struct vfio_iommu *iommu,
 		return -EPERM;
 
 	if (kthread)
-		use_mm(mm);
+		kthread_use_mm(mm);
 	else if (current->mm != mm)
 		goto out;
 
@@ -2345,13 +2345,13 @@ static int vfio_iommu_type1_dma_rw_chunk(struct vfio_iommu *iommu,
 	vaddr = dma->vaddr + offset;
 
 	if (write)
-		*copied = __copy_to_user((void __user *)vaddr, data,
+		*copied = copy_to_user((void __user *)vaddr, data,
 					 count) ? 0 : count;
 	else
-		*copied = __copy_from_user(data, (void __user *)vaddr,
+		*copied = copy_from_user(data, (void __user *)vaddr,
 					   count) ? 0 : count;
 	if (kthread)
-		unuse_mm(mm);
+		kthread_unuse_mm(mm);
 out:
 	mmput(mm);
 	return *copied ? 0 : -EFAULT;
diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
index c4f273793595..2c75d164b827 100644
--- a/drivers/vhost/Kconfig
+++ b/drivers/vhost/Kconfig
@@ -13,15 +13,6 @@ config VHOST_RING
 	  This option is selected by any driver which needs to access
 	  the host side of a virtio ring.
 
-config VHOST_DPN
-	bool
-	depends on !ARM || AEABI
-	default y
-	help
-	  Anything selecting VHOST or VHOST_RING must depend on VHOST_DPN.
-	  This excludes the deprecated ARM ABI since that forces a 4 byte
-	  alignment on all structs - incompatible with virtio spec requirements.
-
 config VHOST
 	tristate
 	select VHOST_IOTLB
@@ -37,7 +28,7 @@ if VHOST_MENU
 
 config VHOST_NET
 	tristate "Host kernel accelerator for virtio net"
-	depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) && VHOST_DPN
+	depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP)
 	select VHOST
 	---help---
 	  This kernel module can be loaded in host kernel to accelerate
@@ -49,7 +40,7 @@ config VHOST_NET
 
 config VHOST_SCSI
 	tristate "VHOST_SCSI TCM fabric driver"
-	depends on TARGET_CORE && EVENTFD && VHOST_DPN
+	depends on TARGET_CORE && EVENTFD
 	select VHOST
 	default n
 	---help---
@@ -58,7 +49,7 @@ config VHOST_SCSI
 
 config VHOST_VSOCK
 	tristate "vhost virtio-vsock driver"
-	depends on VSOCKETS && EVENTFD && VHOST_DPN
+	depends on VSOCKETS && EVENTFD
 	select VHOST
 	select VIRTIO_VSOCKETS_COMMON
 	default n
@@ -72,7 +63,7 @@ config VHOST_VSOCK
 
 config VHOST_VDPA
 	tristate "Vhost driver for vDPA-based backend"
-	depends on EVENTFD && VHOST_DPN
+	depends on EVENTFD
 	select VHOST
 	depends on VDPA
 	help
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index d450e16c5c25..8ab917f7b6f2 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -14,7 +14,6 @@
 #include <linux/vhost.h>
 #include <linux/uio.h>
 #include <linux/mm.h>
-#include <linux/mmu_context.h>
 #include <linux/miscdevice.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
@@ -330,10 +329,8 @@ static int vhost_worker(void *data)
 	struct vhost_dev *dev = data;
 	struct vhost_work *work, *work_next;
 	struct llist_node *node;
-	mm_segment_t oldfs = get_fs();
 
-	set_fs(USER_DS);
-	use_mm(dev->mm);
+	kthread_use_mm(dev->mm);
 
 	for (;;) {
 		/* mb paired w/ kthread_stop */
@@ -361,8 +358,7 @@ static int vhost_worker(void *data)
 				schedule();
 		}
 	}
-	unuse_mm(dev->mm);
-	set_fs(oldfs);
+	kthread_unuse_mm(dev->mm);
 	return 0;
 }
 
@@ -1244,9 +1240,9 @@ static int vhost_iotlb_miss(struct vhost_virtqueue *vq, u64 iova, int access)
 }
 
 static bool vq_access_ok(struct vhost_virtqueue *vq, unsigned int num,
-			 struct vring_desc __user *desc,
-			 struct vring_avail __user *avail,
-			 struct vring_used __user *used)
+			 vring_desc_t __user *desc,
+			 vring_avail_t __user *avail,
+			 vring_used_t __user *used)
 
 {
 	return access_ok(desc, vhost_get_desc_size(vq, num)) &&
@@ -2301,7 +2297,7 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq,
 			    struct vring_used_elem *heads,
 			    unsigned count)
 {
-	struct vring_used_elem __user *used;
+	vring_used_elem_t __user *used;
 	u16 old, new;
 	int start;
 
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index f8403bd46b85..60cab4c78229 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -67,9 +67,9 @@ struct vhost_virtqueue {
 	/* The actual ring of buffers. */
 	struct mutex mutex;
 	unsigned int num;
-	struct vring_desc __user *desc;
-	struct vring_avail __user *avail;
-	struct vring_used __user *used;
+	vring_desc_t __user *desc;
+	vring_avail_t __user *avail;
+	vring_used_t __user *used;
 	const struct vhost_iotlb_map *meta_iotlb[VHOST_NUM_ADDRS];
 	struct file *kick;
 	struct eventfd_ctx *call_ctx;
diff --git a/drivers/vhost/vringh.c b/drivers/vhost/vringh.c
index ba8e0d6cfd97..e059a9a47cdf 100644
--- a/drivers/vhost/vringh.c
+++ b/drivers/vhost/vringh.c
@@ -620,9 +620,9 @@ static inline int xfer_to_user(const struct vringh *vrh,
  */
 int vringh_init_user(struct vringh *vrh, u64 features,
 		     unsigned int num, bool weak_barriers,
-		     struct vring_desc __user *desc,
-		     struct vring_avail __user *avail,
-		     struct vring_used __user *used)
+		     vring_desc_t __user *desc,
+		     vring_avail_t __user *avail,
+		     vring_used_t __user *used)
 {
 	/* Sane power of 2 please! */
 	if (!num || num > 0xffff || (num & (num - 1))) {
diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index e36aaf9ba7bd..31a98c74f678 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -181,14 +181,14 @@ vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
 			break;
 		}
 
-		vhost_add_used(vq, head, sizeof(pkt->hdr) + payload_len);
-		added = true;
-
-		/* Deliver to monitoring devices all correctly transmitted
-		 * packets.
+		/* Deliver to monitoring devices all packets that we
+		 * will transmit.
 		 */
 		virtio_transport_deliver_tap_pkt(pkt);
 
+		vhost_add_used(vq, head, sizeof(pkt->hdr) + payload_len);
+		added = true;
+
 		pkt->off += payload_len;
 		total_len += payload_len;
 
@@ -196,6 +196,12 @@ vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
 		 * to send it with the next available buffer.
 		 */
 		if (pkt->off < pkt->len) {
+			/* We are queueing the same virtio_vsock_pkt to handle
+			 * the remaining bytes, and we want to deliver it
+			 * to monitoring devices in the next iteration.
+			 */
+			pkt->tap_delivered = false;
+
 			spin_lock_bh(&vsock->send_pkt_list_lock);
 			list_add(&pkt->list, &vsock->send_pkt_list);
 			spin_unlock_bh(&vsock->send_pkt_list_lock);
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 91b0a719d221..fa88e8b9a83d 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -472,7 +472,7 @@ config FB_OF
 
 config FB_CONTROL
 	bool "Apple \"control\" display support"
-	depends on (FB = y) && PPC_PMAC && PPC32
+	depends on (FB = y) && ((PPC_PMAC && PPC32) || COMPILE_TEST)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/fbdev/arcfb.c b/drivers/video/fbdev/arcfb.c
index 314ab82e01c0..6f7838979f0a 100644
--- a/drivers/video/fbdev/arcfb.c
+++ b/drivers/video/fbdev/arcfb.c
@@ -544,10 +544,6 @@ static int arcfb_probe(struct platform_device *dev)
 	par->cslut[1] = 0x06;
 	info->flags = FBINFO_FLAG_DEFAULT;
 	spin_lock_init(&par->lock);
-	retval = register_framebuffer(info);
-	if (retval < 0)
-		goto err1;
-	platform_set_drvdata(dev, info);
 	if (irq) {
 		par->irq = irq;
 		if (request_irq(par->irq, &arcfb_interrupt, IRQF_SHARED,
@@ -558,6 +554,10 @@ static int arcfb_probe(struct platform_device *dev)
 			goto err1;
 		}
 	}
+	retval = register_framebuffer(info);
+	if (retval < 0)
+		goto err1;
+	platform_set_drvdata(dev, info);
 	fb_info(info, "Arc frame buffer device, using %dK of video memory\n",
 		videomemorysize >> 10);
 
@@ -593,6 +593,8 @@ static int arcfb_remove(struct platform_device *dev)
 
 	if (info) {
 		unregister_framebuffer(info);
+		if (irq)
+			free_irq(((struct arcfb_par *)(info->par))->irq, info);
 		vfree((void __force *)info->screen_base);
 		framebuffer_release(info);
 	}
diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index d567f5d56c13..1e252192569a 100644
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -1114,7 +1114,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 
 	sinfo->irq_base = platform_get_irq(pdev, 0);
 	if (sinfo->irq_base < 0) {
-		dev_err(dev, "unable to get irq\n");
 		ret = sinfo->irq_base;
 		goto stop_clk;
 	}
diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c
index d7e41c8dd533..d05d4195acad 100644
--- a/drivers/video/fbdev/aty/aty128fb.c
+++ b/drivers/video/fbdev/aty/aty128fb.c
@@ -334,20 +334,6 @@ static const struct aty128_meminfo sdr_128 = {
 	.name = "128-bit SDR SGRAM (1:1)",
 };
 
-static const struct aty128_meminfo sdr_64 = {
-	.ML = 4,
-	.MB = 8,
-	.Trcd = 3,
-	.Trp = 3,
-	.Twr = 1,
-	.CL = 3,
-	.Tr2w = 1,
-	.LoopLatency = 17,
-	.DspOn = 46,
-	.Rloop = 17,
-	.name = "64-bit SDR SGRAM (1:1)",
-};
-
 static const struct aty128_meminfo sdr_sgram = {
 	.ML = 4,
 	.MB = 4,
diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index 175d2598f28e..49d192869cf5 100644
--- a/drivers/video/fbdev/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -126,7 +126,7 @@
 #ifdef DEBUG
 #define DPRINTK(fmt, args...)	printk(KERN_DEBUG "atyfb: " fmt, ## args)
 #else
-#define DPRINTK(fmt, args...)
+#define DPRINTK(fmt, args...)	no_printk(fmt, ##args)
 #endif
 
 #define PRINTKI(fmt, args...)	printk(KERN_INFO "atyfb: " fmt, ## args)
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 38b61cdb5ca4..9c4f1be856ec 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -31,7 +31,6 @@
  *  more details.
  */
 
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
@@ -48,12 +47,37 @@
 #include <linux/nvram.h>
 #include <linux/adb.h>
 #include <linux/cuda.h>
+#ifdef CONFIG_PPC_PMAC
 #include <asm/prom.h>
 #include <asm/btext.h>
+#endif
 
 #include "macmodes.h"
 #include "controlfb.h"
 
+#if !defined(CONFIG_PPC_PMAC) || !defined(CONFIG_PPC32)
+#define invalid_vram_cache(addr)
+#undef in_8
+#undef out_8
+#undef in_le32
+#undef out_le32
+#define in_8(addr)		0
+#define out_8(addr, val)
+#define in_le32(addr)		0
+#define out_le32(addr, val)
+#define pgprot_cached_wthru(prot) (prot)
+#else
+static void invalid_vram_cache(void __force *addr)
+{
+	eieio();
+	dcbf(addr);
+	mb();
+	eieio();
+	dcbf(addr);
+	mb();
+}
+#endif
+
 struct fb_par_control {
 	int	vmode, cmode;
 	int	xres, yres;
@@ -117,38 +141,6 @@ struct fb_info_control {
 #define CNTRL_REG(INFO,REG) (&(((INFO)->control_regs->REG).r))
 
 
-/******************** Prototypes for exported functions ********************/
-/*
- * struct fb_ops
- */
-static int controlfb_pan_display(struct fb_var_screeninfo *var,
-	struct fb_info *info);
-static int controlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-	u_int transp, struct fb_info *info);
-static int controlfb_blank(int blank_mode, struct fb_info *info);
-static int controlfb_mmap(struct fb_info *info,
-	struct vm_area_struct *vma);
-static int controlfb_set_par (struct fb_info *info);
-static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info);
-
-/******************** Prototypes for internal functions **********************/
-
-static void set_control_clock(unsigned char *params);
-static int init_control(struct fb_info_control *p);
-static void control_set_hardware(struct fb_info_control *p,
-	struct fb_par_control *par);
-static int control_of_init(struct device_node *dp);
-static void find_vram_size(struct fb_info_control *p);
-static int read_control_sense(struct fb_info_control *p);
-static int calc_clock_params(unsigned long clk, unsigned char *param);
-static int control_var_to_par(struct fb_var_screeninfo *var,
-	struct fb_par_control *par, const struct fb_info *fb_info);
-static inline void control_par_to_var(struct fb_par_control *par,
-	struct fb_var_screeninfo *var);
-static void control_init_info(struct fb_info *info, struct fb_info_control *p);
-static void control_cleanup(void);
-
-
 /************************** Internal variables *******************************/
 
 static struct fb_info_control *control_fb;
@@ -157,189 +149,6 @@ static int default_vmode __initdata = VMODE_NVRAM;
 static int default_cmode __initdata = CMODE_NVRAM;
 
 
-static const struct fb_ops controlfb_ops = {
-	.owner		= THIS_MODULE,
-	.fb_check_var	= controlfb_check_var,
-	.fb_set_par	= controlfb_set_par,
-	.fb_setcolreg	= controlfb_setcolreg,
-	.fb_pan_display = controlfb_pan_display,
-	.fb_blank	= controlfb_blank,
-	.fb_mmap	= controlfb_mmap,
-	.fb_fillrect	= cfb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
-};
-
-
-/********************  The functions for controlfb_ops ********************/
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
-	struct device_node *dp;
-	int ret = -ENXIO;
-
-	dp = of_find_node_by_name(NULL, "control");
-	if (dp && !control_of_init(dp))
-		ret = 0;
-	of_node_put(dp);
-
-	return ret;
-}
-
-void cleanup_module(void)
-{
-	control_cleanup();
-}
-#endif
-
-/*
- * Checks a var structure
- */
-static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
-{
-	struct fb_par_control par;
-	int err;
-
-	err = control_var_to_par(var, &par, info);
-	if (err)
-		return err;	
-	control_par_to_var(&par, var);
-
-	return 0;
-}
-
-/*
- * Applies current var to display
- */
-static int controlfb_set_par (struct fb_info *info)
-{
-	struct fb_info_control *p =
-		container_of(info, struct fb_info_control, info);
-	struct fb_par_control par;
-	int err;
-
-	if((err = control_var_to_par(&info->var, &par, info))) {
-		printk (KERN_ERR "controlfb_set_par: error calling"
-				 " control_var_to_par: %d.\n", err);
-		return err;
-	}
-	
-	control_set_hardware(p, &par);
-
-	info->fix.visual = (p->par.cmode == CMODE_8) ?
-		FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
-	info->fix.line_length = p->par.pitch;
-	info->fix.xpanstep = 32 >> p->par.cmode;
-	info->fix.ypanstep = 1;
-
-	return 0;
-}
-
-/*
- * Set screen start address according to var offset values
- */
-static inline void set_screen_start(int xoffset, int yoffset,
-	struct fb_info_control *p)
-{
-	struct fb_par_control *par = &p->par;
-
-	par->xoffset = xoffset;
-	par->yoffset = yoffset;
-	out_le32(CNTRL_REG(p,start_addr),
-		 par->yoffset * par->pitch + (par->xoffset << par->cmode));
-}
-
-
-static int controlfb_pan_display(struct fb_var_screeninfo *var,
-				 struct fb_info *info)
-{
-	unsigned int xoffset, hstep;
-	struct fb_info_control *p =
-		container_of(info, struct fb_info_control, info);
-	struct fb_par_control *par = &p->par;
-
-	/*
-	 * make sure start addr will be 32-byte aligned
-	 */
-	hstep = 0x1f >> par->cmode;
-	xoffset = (var->xoffset + hstep) & ~hstep;
-
-	if (xoffset+par->xres > par->vxres ||
-	    var->yoffset+par->yres > par->vyres)
-		return -EINVAL;
-
-	set_screen_start(xoffset, var->yoffset, p);
-
-	return 0;
-}
-
-
-/*
- * Private mmap since we want to have a different caching on the framebuffer
- * for controlfb.
- * Note there's no locking in here; it's done in fb_mmap() in fbmem.c.
- */
-static int controlfb_mmap(struct fb_info *info,
-                       struct vm_area_struct *vma)
-{
-	unsigned long mmio_pgoff;
-	unsigned long start;
-	u32 len;
-
-	start = info->fix.smem_start;
-	len = info->fix.smem_len;
-	mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT;
-	if (vma->vm_pgoff >= mmio_pgoff) {
-		if (info->var.accel_flags)
-			return -EINVAL;
-		vma->vm_pgoff -= mmio_pgoff;
-		start = info->fix.mmio_start;
-		len = info->fix.mmio_len;
-		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	} else {
-		/* framebuffer */
-		vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
-	}
-
-	return vm_iomap_memory(vma, start, len);
-}
-
-static int controlfb_blank(int blank_mode, struct fb_info *info)
-{
-	struct fb_info_control *p =
-		container_of(info, struct fb_info_control, info);
-	unsigned ctrl;
-
-	ctrl = le32_to_cpup(CNTRL_REG(p,ctrl));
-	if (blank_mode > 0)
-		switch (blank_mode) {
-		case FB_BLANK_VSYNC_SUSPEND:
-			ctrl &= ~3;
-			break;
-		case FB_BLANK_HSYNC_SUSPEND:
-			ctrl &= ~0x30;
-			break;
-		case FB_BLANK_POWERDOWN:
-			ctrl &= ~0x33;
-			/* fall through */
-		case FB_BLANK_NORMAL:
-			ctrl |= 0x400;
-			break;
-		default:
-			break;
-		}
-	else {
-		ctrl &= ~0x400;
-		ctrl |= 0x33;
-	}
-	out_le32(CNTRL_REG(p,ctrl), ctrl);
-
-	return 0;
-}
-
 static int controlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 			     u_int transp, struct fb_info *info)
 {
@@ -396,88 +205,31 @@ static void set_control_clock(unsigned char *params)
 #endif	
 }
 
-
 /*
- * finish off the driver initialization and register
+ * Set screen start address according to var offset values
  */
-static int __init init_control(struct fb_info_control *p)
+static inline void set_screen_start(int xoffset, int yoffset,
+	struct fb_info_control *p)
 {
-	int full, sense, vmode, cmode, vyres;
-	struct fb_var_screeninfo var;
-	int rc;
-	
-	printk(KERN_INFO "controlfb: ");
-
-	full = p->total_vram == 0x400000;
+	struct fb_par_control *par = &p->par;
 
-	/* Try to pick a video mode out of NVRAM if we have one. */
-	cmode = default_cmode;
-	if (IS_REACHABLE(CONFIG_NVRAM) && cmode == CMODE_NVRAM)
-		cmode = nvram_read_byte(NV_CMODE);
-	if (cmode < CMODE_8 || cmode > CMODE_32)
-		cmode = CMODE_8;
+	par->xoffset = xoffset;
+	par->yoffset = yoffset;
+	out_le32(CNTRL_REG(p,start_addr),
+		 par->yoffset * par->pitch + (par->xoffset << par->cmode));
+}
 
-	vmode = default_vmode;
-	if (IS_REACHABLE(CONFIG_NVRAM) && vmode == VMODE_NVRAM)
-		vmode = nvram_read_byte(NV_VMODE);
-	if (vmode < 1 || vmode > VMODE_MAX ||
-	    control_mac_modes[vmode - 1].m[full] < cmode) {
-		sense = read_control_sense(p);
-		printk(KERN_CONT "Monitor sense value = 0x%x, ", sense);
-		vmode = mac_map_monitor_sense(sense);
-		if (control_mac_modes[vmode - 1].m[full] < 0)
-			vmode = VMODE_640_480_60;
-		cmode = min(cmode, control_mac_modes[vmode - 1].m[full]);
-	}
+#define RADACAL_WRITE(a,d) \
+	out_8(&p->cmap_regs->addr, (a)); \
+	out_8(&p->cmap_regs->dat,   (d))
 
-	/* Initialize info structure */
-	control_init_info(&p->info, p);
-
-	/* Setup default var */
-	if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
-		/* This shouldn't happen! */
-		printk("mac_vmode_to_var(%d, %d,) failed\n", vmode, cmode);
-try_again:
-		vmode = VMODE_640_480_60;
-		cmode = CMODE_8;
-		if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
-			printk(KERN_ERR "controlfb: mac_vmode_to_var() failed\n");
-			return -ENXIO;
-		}
-		printk(KERN_INFO "controlfb: ");
-	}
-	printk("using video mode %d and color mode %d.\n", vmode, cmode);
-
-	vyres = (p->total_vram - CTRLFB_OFF) / (var.xres << cmode);
-	if (vyres > var.yres)
-		var.yres_virtual = vyres;
-
-	/* Apply default var */
-	var.activate = FB_ACTIVATE_NOW;
-	rc = fb_set_var(&p->info, &var);
-	if (rc && (vmode != VMODE_640_480_60 || cmode != CMODE_8))
-		goto try_again;
-
-	/* Register with fbdev layer */
-	if (register_framebuffer(&p->info) < 0)
-		return -ENXIO;
-
-	fb_info(&p->info, "control display adapter\n");
-
-	return 0;
-}
-
-#define RADACAL_WRITE(a,d) \
-	out_8(&p->cmap_regs->addr, (a)); \
-	out_8(&p->cmap_regs->dat,   (d))
-
-/* Now how about actually saying, Make it so! */
-/* Some things in here probably don't need to be done each time. */
-static void control_set_hardware(struct fb_info_control *p, struct fb_par_control *par)
-{
-	struct control_regvals	*r;
-	volatile struct preg	__iomem *rp;
-	int			i, cmode;
+/* Now how about actually saying, Make it so! */
+/* Some things in here probably don't need to be done each time. */
+static void control_set_hardware(struct fb_info_control *p, struct fb_par_control *par)
+{
+	struct control_regvals	*r;
+	volatile struct preg	__iomem *rp;
+	int			i, cmode;
 
 	if (PAR_EQUAL(&p->par, par)) {
 		/*
@@ -528,67 +280,6 @@ static void control_set_hardware(struct fb_info_control *p, struct fb_par_contro
 #endif /* CONFIG_BOOTX_TEXT */
 }
 
-
-/*
- * Parse user specified options (`video=controlfb:')
- */
-static void __init control_setup(char *options)
-{
-	char *this_opt;
-
-	if (!options || !*options)
-		return;
-
-	while ((this_opt = strsep(&options, ",")) != NULL) {
-		if (!strncmp(this_opt, "vmode:", 6)) {
-			int vmode = simple_strtoul(this_opt+6, NULL, 0);
-			if (vmode > 0 && vmode <= VMODE_MAX &&
-			    control_mac_modes[vmode - 1].m[1] >= 0)
-				default_vmode = vmode;
-		} else if (!strncmp(this_opt, "cmode:", 6)) {
-			int depth = simple_strtoul(this_opt+6, NULL, 0);
-			switch (depth) {
-			 case CMODE_8:
-			 case CMODE_16:
-			 case CMODE_32:
-			 	default_cmode = depth;
-			 	break;
-			 case 8:
-				default_cmode = CMODE_8;
-				break;
-			 case 15:
-			 case 16:
-				default_cmode = CMODE_16;
-				break;
-			 case 24:
-			 case 32:
-				default_cmode = CMODE_32;
-				break;
-			}
-		}
-	}
-}
-
-static int __init control_init(void)
-{
-	struct device_node *dp;
-	char *option = NULL;
-	int ret = -ENXIO;
-
-	if (fb_get_options("controlfb", &option))
-		return -ENODEV;
-	control_setup(option);
-
-	dp = of_find_node_by_name(NULL, "control");
-	if (dp && !control_of_init(dp))
-		ret = 0;
-	of_node_put(dp);
-
-	return ret;
-}
-
-module_init(control_init);
-
 /* Work out which banks of VRAM we have installed. */
 /* danj: I guess the card just ignores writes to nonexistant VRAM... */
 
@@ -605,12 +296,7 @@ static void __init find_vram_size(struct fb_info_control *p)
 
 	out_8(&p->frame_buffer[0x600000], 0xb3);
 	out_8(&p->frame_buffer[0x600001], 0x71);
-	asm volatile("eieio; dcbf 0,%0" : : "r" (&p->frame_buffer[0x600000])
-					: "memory" );
-	mb();
-	asm volatile("eieio; dcbi 0,%0" : : "r" (&p->frame_buffer[0x600000])
-					: "memory" );
-	mb();
+	invalid_vram_cache(&p->frame_buffer[0x600000]);
 
 	bank2 = (in_8(&p->frame_buffer[0x600000]) == 0xb3)
 		&& (in_8(&p->frame_buffer[0x600001]) == 0x71);
@@ -624,12 +310,7 @@ static void __init find_vram_size(struct fb_info_control *p)
 
 	out_8(&p->frame_buffer[0], 0x5a);
 	out_8(&p->frame_buffer[1], 0xc7);
-	asm volatile("eieio; dcbf 0,%0" : : "r" (&p->frame_buffer[0])
-					: "memory" );
-	mb();
-	asm volatile("eieio; dcbi 0,%0" : : "r" (&p->frame_buffer[0])
-					: "memory" );
-	mb();
+	invalid_vram_cache(&p->frame_buffer[0]);
 
 	bank1 = (in_8(&p->frame_buffer[0]) == 0x5a)
 		&& (in_8(&p->frame_buffer[1]) == 0xc7);
@@ -663,78 +344,6 @@ static void __init find_vram_size(struct fb_info_control *p)
 			(bank1 + bank2) << 1, bank1 << 1, bank2 << 1);
 }
 
-
-/*
- * find "control" and initialize
- */
-static int __init control_of_init(struct device_node *dp)
-{
-	struct fb_info_control	*p;
-	struct resource		fb_res, reg_res;
-
-	if (control_fb) {
-		printk(KERN_ERR "controlfb: only one control is supported\n");
-		return -ENXIO;
-	}
-
-	if (of_pci_address_to_resource(dp, 2, &fb_res) ||
-	    of_pci_address_to_resource(dp, 1, &reg_res)) {
-		printk(KERN_ERR "can't get 2 addresses for control\n");
-		return -ENXIO;
-	}
-	p = kzalloc(sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-	control_fb = p;	/* save it for cleanups */
-
-	/* Map in frame buffer and registers */
-	p->fb_orig_base = fb_res.start;
-	p->fb_orig_size = resource_size(&fb_res);
-	/* use the big-endian aperture (??) */
-	p->frame_buffer_phys = fb_res.start + 0x800000;
-	p->control_regs_phys = reg_res.start;
-	p->control_regs_size = resource_size(&reg_res);
-
-	if (!p->fb_orig_base ||
-	    !request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) {
-		p->fb_orig_base = 0;
-		goto error_out;
-	}
-	/* map at most 8MB for the frame buffer */
-	p->frame_buffer = ioremap_wt(p->frame_buffer_phys, 0x800000);
-
-	if (!p->control_regs_phys ||
-	    !request_mem_region(p->control_regs_phys, p->control_regs_size,
-	    "controlfb regs")) {
-		p->control_regs_phys = 0;
-		goto error_out;
-	}
-	p->control_regs = ioremap(p->control_regs_phys, p->control_regs_size);
-
-	p->cmap_regs_phys = 0xf301b000;	 /* XXX not in prom? */
-	if (!request_mem_region(p->cmap_regs_phys, 0x1000, "controlfb cmap")) {
-		p->cmap_regs_phys = 0;
-		goto error_out;
-	}
-	p->cmap_regs = ioremap(p->cmap_regs_phys, 0x1000);
-
-	if (!p->cmap_regs || !p->control_regs || !p->frame_buffer)
-		goto error_out;
-
-	find_vram_size(p);
-	if (!p->total_vram)
-		goto error_out;
-
-	if (init_control(p) < 0)
-		goto error_out;
-
-	return 0;
-
-error_out:
-	control_cleanup();
-	return -ENXIO;
-}
-
 /*
  * Get the monitor sense value.
  * Note that this can be called before calibrate_delay,
@@ -1019,6 +628,150 @@ static void control_par_to_var(struct fb_par_control *par, struct fb_var_screeni
 	var->pixclock >>= par->regvals.clock_params[2];
 }
 
+/********************  The functions for controlfb_ops ********************/
+
+/*
+ * Checks a var structure
+ */
+static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct fb_par_control par;
+	int err;
+
+	err = control_var_to_par(var, &par, info);
+	if (err)
+		return err;	
+	control_par_to_var(&par, var);
+
+	return 0;
+}
+
+/*
+ * Applies current var to display
+ */
+static int controlfb_set_par (struct fb_info *info)
+{
+	struct fb_info_control *p =
+		container_of(info, struct fb_info_control, info);
+	struct fb_par_control par;
+	int err;
+
+	if((err = control_var_to_par(&info->var, &par, info))) {
+		printk (KERN_ERR "controlfb_set_par: error calling"
+				 " control_var_to_par: %d.\n", err);
+		return err;
+	}
+	
+	control_set_hardware(p, &par);
+
+	info->fix.visual = (p->par.cmode == CMODE_8) ?
+		FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
+	info->fix.line_length = p->par.pitch;
+	info->fix.xpanstep = 32 >> p->par.cmode;
+	info->fix.ypanstep = 1;
+
+	return 0;
+}
+
+static int controlfb_pan_display(struct fb_var_screeninfo *var,
+				 struct fb_info *info)
+{
+	unsigned int xoffset, hstep;
+	struct fb_info_control *p =
+		container_of(info, struct fb_info_control, info);
+	struct fb_par_control *par = &p->par;
+
+	/*
+	 * make sure start addr will be 32-byte aligned
+	 */
+	hstep = 0x1f >> par->cmode;
+	xoffset = (var->xoffset + hstep) & ~hstep;
+
+	if (xoffset+par->xres > par->vxres ||
+	    var->yoffset+par->yres > par->vyres)
+		return -EINVAL;
+
+	set_screen_start(xoffset, var->yoffset, p);
+
+	return 0;
+}
+
+static int controlfb_blank(int blank_mode, struct fb_info *info)
+{
+	struct fb_info_control __maybe_unused *p =
+		container_of(info, struct fb_info_control, info);
+	unsigned ctrl;
+
+	ctrl = in_le32(CNTRL_REG(p, ctrl));
+	if (blank_mode > 0)
+		switch (blank_mode) {
+		case FB_BLANK_VSYNC_SUSPEND:
+			ctrl &= ~3;
+			break;
+		case FB_BLANK_HSYNC_SUSPEND:
+			ctrl &= ~0x30;
+			break;
+		case FB_BLANK_POWERDOWN:
+			ctrl &= ~0x33;
+			/* fall through */
+		case FB_BLANK_NORMAL:
+			ctrl |= 0x400;
+			break;
+		default:
+			break;
+		}
+	else {
+		ctrl &= ~0x400;
+		ctrl |= 0x33;
+	}
+	out_le32(CNTRL_REG(p,ctrl), ctrl);
+
+	return 0;
+}
+
+/*
+ * Private mmap since we want to have a different caching on the framebuffer
+ * for controlfb.
+ * Note there's no locking in here; it's done in fb_mmap() in fbmem.c.
+ */
+static int controlfb_mmap(struct fb_info *info,
+                       struct vm_area_struct *vma)
+{
+	unsigned long mmio_pgoff;
+	unsigned long start;
+	u32 len;
+
+	start = info->fix.smem_start;
+	len = info->fix.smem_len;
+	mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT;
+	if (vma->vm_pgoff >= mmio_pgoff) {
+		if (info->var.accel_flags)
+			return -EINVAL;
+		vma->vm_pgoff -= mmio_pgoff;
+		start = info->fix.mmio_start;
+		len = info->fix.mmio_len;
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	} else {
+		/* framebuffer */
+		vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
+	}
+
+	return vm_iomap_memory(vma, start, len);
+}
+
+static const struct fb_ops controlfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= controlfb_check_var,
+	.fb_set_par	= controlfb_set_par,
+	.fb_setcolreg	= controlfb_setcolreg,
+	.fb_pan_display = controlfb_pan_display,
+	.fb_blank	= controlfb_blank,
+	.fb_mmap	= controlfb_mmap,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
 /*
  * Set misc info vars for this driver
  */
@@ -1045,6 +798,115 @@ static void __init control_init_info(struct fb_info *info, struct fb_info_contro
         info->fix.accel = FB_ACCEL_NONE;
 }
 
+/*
+ * Parse user specified options (`video=controlfb:')
+ */
+static void __init control_setup(char *options)
+{
+	char *this_opt;
+
+	if (!options || !*options)
+		return;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		if (!strncmp(this_opt, "vmode:", 6)) {
+			int vmode = simple_strtoul(this_opt+6, NULL, 0);
+			if (vmode > 0 && vmode <= VMODE_MAX &&
+			    control_mac_modes[vmode - 1].m[1] >= 0)
+				default_vmode = vmode;
+		} else if (!strncmp(this_opt, "cmode:", 6)) {
+			int depth = simple_strtoul(this_opt+6, NULL, 0);
+			switch (depth) {
+			 case CMODE_8:
+			 case CMODE_16:
+			 case CMODE_32:
+			 	default_cmode = depth;
+			 	break;
+			 case 8:
+				default_cmode = CMODE_8;
+				break;
+			 case 15:
+			 case 16:
+				default_cmode = CMODE_16;
+				break;
+			 case 24:
+			 case 32:
+				default_cmode = CMODE_32;
+				break;
+			}
+		}
+	}
+}
+
+/*
+ * finish off the driver initialization and register
+ */
+static int __init init_control(struct fb_info_control *p)
+{
+	int full, sense, vmode, cmode, vyres;
+	struct fb_var_screeninfo var;
+	int rc;
+	
+	printk(KERN_INFO "controlfb: ");
+
+	full = p->total_vram == 0x400000;
+
+	/* Try to pick a video mode out of NVRAM if we have one. */
+	cmode = default_cmode;
+	if (IS_REACHABLE(CONFIG_NVRAM) && cmode == CMODE_NVRAM)
+		cmode = nvram_read_byte(NV_CMODE);
+	if (cmode < CMODE_8 || cmode > CMODE_32)
+		cmode = CMODE_8;
+
+	vmode = default_vmode;
+	if (IS_REACHABLE(CONFIG_NVRAM) && vmode == VMODE_NVRAM)
+		vmode = nvram_read_byte(NV_VMODE);
+	if (vmode < 1 || vmode > VMODE_MAX ||
+	    control_mac_modes[vmode - 1].m[full] < cmode) {
+		sense = read_control_sense(p);
+		printk(KERN_CONT "Monitor sense value = 0x%x, ", sense);
+		vmode = mac_map_monitor_sense(sense);
+		if (control_mac_modes[vmode - 1].m[full] < 0)
+			vmode = VMODE_640_480_60;
+		cmode = min(cmode, control_mac_modes[vmode - 1].m[full]);
+	}
+
+	/* Initialize info structure */
+	control_init_info(&p->info, p);
+
+	/* Setup default var */
+	if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
+		/* This shouldn't happen! */
+		printk("mac_vmode_to_var(%d, %d,) failed\n", vmode, cmode);
+try_again:
+		vmode = VMODE_640_480_60;
+		cmode = CMODE_8;
+		if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
+			printk(KERN_ERR "controlfb: mac_vmode_to_var() failed\n");
+			return -ENXIO;
+		}
+		printk(KERN_INFO "controlfb: ");
+	}
+	printk("using video mode %d and color mode %d.\n", vmode, cmode);
+
+	vyres = (p->total_vram - CTRLFB_OFF) / (var.xres << cmode);
+	if (vyres > var.yres)
+		var.yres_virtual = vyres;
+
+	/* Apply default var */
+	var.activate = FB_ACTIVATE_NOW;
+	rc = fb_set_var(&p->info, &var);
+	if (rc && (vmode != VMODE_640_480_60 || cmode != CMODE_8))
+		goto try_again;
+
+	/* Register with fbdev layer */
+	if (register_framebuffer(&p->info) < 0)
+		return -ENXIO;
+
+	fb_info(&p->info, "control display adapter\n");
+
+	return 0;
+}
 
 static void control_cleanup(void)
 {
@@ -1071,4 +933,93 @@ static void control_cleanup(void)
 	kfree(p);
 }
 
+/*
+ * find "control" and initialize
+ */
+static int __init control_of_init(struct device_node *dp)
+{
+	struct fb_info_control	*p;
+	struct resource		fb_res, reg_res;
+
+	if (control_fb) {
+		printk(KERN_ERR "controlfb: only one control is supported\n");
+		return -ENXIO;
+	}
+
+	if (of_pci_address_to_resource(dp, 2, &fb_res) ||
+	    of_pci_address_to_resource(dp, 1, &reg_res)) {
+		printk(KERN_ERR "can't get 2 addresses for control\n");
+		return -ENXIO;
+	}
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+	control_fb = p;	/* save it for cleanups */
+
+	/* Map in frame buffer and registers */
+	p->fb_orig_base = fb_res.start;
+	p->fb_orig_size = resource_size(&fb_res);
+	/* use the big-endian aperture (??) */
+	p->frame_buffer_phys = fb_res.start + 0x800000;
+	p->control_regs_phys = reg_res.start;
+	p->control_regs_size = resource_size(&reg_res);
+
+	if (!p->fb_orig_base ||
+	    !request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) {
+		p->fb_orig_base = 0;
+		goto error_out;
+	}
+	/* map at most 8MB for the frame buffer */
+	p->frame_buffer = ioremap_wt(p->frame_buffer_phys, 0x800000);
+
+	if (!p->control_regs_phys ||
+	    !request_mem_region(p->control_regs_phys, p->control_regs_size,
+	    "controlfb regs")) {
+		p->control_regs_phys = 0;
+		goto error_out;
+	}
+	p->control_regs = ioremap(p->control_regs_phys, p->control_regs_size);
+
+	p->cmap_regs_phys = 0xf301b000;	 /* XXX not in prom? */
+	if (!request_mem_region(p->cmap_regs_phys, 0x1000, "controlfb cmap")) {
+		p->cmap_regs_phys = 0;
+		goto error_out;
+	}
+	p->cmap_regs = ioremap(p->cmap_regs_phys, 0x1000);
+
+	if (!p->cmap_regs || !p->control_regs || !p->frame_buffer)
+		goto error_out;
+
+	find_vram_size(p);
+	if (!p->total_vram)
+		goto error_out;
+
+	if (init_control(p) < 0)
+		goto error_out;
+
+	return 0;
+
+error_out:
+	control_cleanup();
+	return -ENXIO;
+}
+
+static int __init control_init(void)
+{
+	struct device_node *dp;
+	char *option = NULL;
+	int ret = -ENXIO;
+
+	if (fb_get_options("controlfb", &option))
+		return -ENODEV;
+	control_setup(option);
+
+	dp = of_find_node_by_name(NULL, "control");
+	if (dp && !control_of_init(dp))
+		ret = 0;
+	of_node_put(dp);
+
+	return ret;
+}
 
+device_initcall(control_init);
diff --git a/drivers/video/fbdev/core/fbmon.c b/drivers/video/fbdev/core/fbmon.c
index 8e2e19f3bf44..d62a1e43864e 100644
--- a/drivers/video/fbdev/core/fbmon.c
+++ b/drivers/video/fbdev/core/fbmon.c
@@ -44,7 +44,7 @@
 #ifdef DEBUG
 #define DPRINTK(fmt, args...) printk(fmt,## args)
 #else
-#define DPRINTK(fmt, args...)
+#define DPRINTK(fmt, args...) no_printk(fmt, ##args)
 #endif
 
 #define FBMON_FIX_HEADER  1
diff --git a/drivers/video/fbdev/cyber2000fb.c b/drivers/video/fbdev/cyber2000fb.c
index 460826a7ad55..513f58f28b0f 100644
--- a/drivers/video/fbdev/cyber2000fb.c
+++ b/drivers/video/fbdev/cyber2000fb.c
@@ -1160,12 +1160,14 @@ EXPORT_SYMBOL(cyber2000fb_detach);
 #define DDC_SDA_IN	(1 << 6)
 
 static void cyber2000fb_enable_ddc(struct cfb_info *cfb)
+	__acquires(&cfb->reg_b0_lock)
 {
 	spin_lock(&cfb->reg_b0_lock);
 	cyber2000fb_writew(0x1bf, 0x3ce, cfb);
 }
 
 static void cyber2000fb_disable_ddc(struct cfb_info *cfb)
+	__releases(&cfb->reg_b0_lock)
 {
 	cyber2000fb_writew(0x0bf, 0x3ce, cfb);
 	spin_unlock(&cfb->reg_b0_lock);
diff --git a/drivers/video/fbdev/imxfb.c b/drivers/video/fbdev/imxfb.c
index 370bf2553d43..884b16efa7e8 100644
--- a/drivers/video/fbdev/imxfb.c
+++ b/drivers/video/fbdev/imxfb.c
@@ -172,6 +172,7 @@ struct imxfb_info {
 	int			num_modes;
 
 	struct regulator	*lcd_pwr;
+	int			lcd_pwr_enabled;
 };
 
 static const struct platform_device_id imxfb_devtype[] = {
@@ -801,16 +802,30 @@ static int imxfb_lcd_get_power(struct lcd_device *lcddev)
 	return FB_BLANK_UNBLANK;
 }
 
+static int imxfb_regulator_set(struct imxfb_info *fbi, int enable)
+{
+	int ret;
+
+	if (enable == fbi->lcd_pwr_enabled)
+		return 0;
+
+	if (enable)
+		ret = regulator_enable(fbi->lcd_pwr);
+	else
+		ret = regulator_disable(fbi->lcd_pwr);
+
+	if (ret == 0)
+		fbi->lcd_pwr_enabled = enable;
+
+	return ret;
+}
+
 static int imxfb_lcd_set_power(struct lcd_device *lcddev, int power)
 {
 	struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
 
-	if (!IS_ERR(fbi->lcd_pwr)) {
-		if (power == FB_BLANK_UNBLANK)
-			return regulator_enable(fbi->lcd_pwr);
-		else
-			return regulator_disable(fbi->lcd_pwr);
-	}
+	if (!IS_ERR(fbi->lcd_pwr))
+		return imxfb_regulator_set(fbi, power == FB_BLANK_UNBLANK);
 
 	return 0;
 }
diff --git a/drivers/video/fbdev/matrox/g450_pll.c b/drivers/video/fbdev/matrox/g450_pll.c
index c15f8a57498e..ff8e321a22ce 100644
--- a/drivers/video/fbdev/matrox/g450_pll.c
+++ b/drivers/video/fbdev/matrox/g450_pll.c
@@ -333,11 +333,9 @@ static int __g450_setclk(struct matrox_fb_info *minfo, unsigned int fout,
 			 unsigned int *deltaarray)
 {
 	unsigned int mnpcount;
-	unsigned int pixel_vco;
 	const struct matrox_pll_limits* pi;
 	struct matrox_pll_cache* ci;
 
-	pixel_vco = 0;
 	switch (pll) {
 		case M_PIXEL_PLL_A:
 		case M_PIXEL_PLL_B:
@@ -420,7 +418,6 @@ static int __g450_setclk(struct matrox_fb_info *minfo, unsigned int fout,
 				
 				mnp = matroxfb_DAC_in(minfo, M1064_XPIXPLLCM) << 16;
 				mnp |= matroxfb_DAC_in(minfo, M1064_XPIXPLLCN) << 8;
-				pixel_vco = g450_mnp2vco(minfo, mnp);
 				matroxfb_DAC_unlock_irqrestore(flags);
 			}
 			pi = &minfo->limits.video;
@@ -441,25 +438,6 @@ static int __g450_setclk(struct matrox_fb_info *minfo, unsigned int fout,
 			unsigned int delta;
 
 			vco = g450_mnp2vco(minfo, mnp);
-#if 0			
-			if (pll == M_VIDEO_PLL) {
-				unsigned int big, small;
-
-				if (vco < pixel_vco) {
-					small = vco;
-					big = pixel_vco;
-				} else {
-					small = pixel_vco;
-					big = vco;
-				}
-				while (big > small) {
-					big >>= 1;
-				}
-				if (big == small) {
-					continue;
-				}
-			}
-#endif			
 			delta = pll_freq_delta(fout, g450_vco2f(mnp, vco));
 			for (idx = mnpcount; idx > 0; idx--) {
 				/* == is important; due to nextpll algorithm we get
diff --git a/drivers/video/fbdev/matrox/matroxfb_base.h b/drivers/video/fbdev/matrox/matroxfb_base.h
index f85ad25659e5..759dee996af1 100644
--- a/drivers/video/fbdev/matrox/matroxfb_base.h
+++ b/drivers/video/fbdev/matrox/matroxfb_base.h
@@ -86,7 +86,7 @@
 #ifdef DEBUG
 #define dprintk(X...)	printk(X)
 #else
-#define dprintk(X...)
+#define dprintk(X...)	no_printk(X)
 #endif
 
 #ifndef PCI_SS_VENDOR_ID_SIEMENS_NIXDORF
diff --git a/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
index 42569264801f..d40b806461ca 100644
--- a/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
@@ -184,7 +184,6 @@ static void mb86290fb_imageblit16(u32 *cmd, u16 step, u16 dx, u16 dy,
 static void mb86290fb_imageblit(struct fb_info *info,
 				const struct fb_image *image)
 {
-	int mdr;
 	u32 *cmd = NULL;
 	void (*cmdfn) (u32 *, u16, u16, u16, u16, u16, u32, u32,
 		       const struct fb_image *, struct fb_info *) = NULL;
@@ -196,7 +195,6 @@ static void mb86290fb_imageblit(struct fb_info *info,
 	u16 dx = image->dx, dy = image->dy;
 	int x2, y2, vxres, vyres;
 
-	mdr = (GDC_ROP_COPY << 9);
 	x2 = image->dx + image->width;
 	y2 = image->dy + image->height;
 	vxres = info->var.xres_virtual;
diff --git a/drivers/video/fbdev/mx3fb.c b/drivers/video/fbdev/mx3fb.c
index 4af28e4421e5..603731a5a72e 100644
--- a/drivers/video/fbdev/mx3fb.c
+++ b/drivers/video/fbdev/mx3fb.c
@@ -509,7 +509,7 @@ static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
 			  uint16_t h_start_width, uint16_t h_sync_width,
 			  uint16_t h_end_width, uint16_t v_start_width,
 			  uint16_t v_sync_width, uint16_t v_end_width,
-			  struct ipu_di_signal_cfg sig)
+			  const struct ipu_di_signal_cfg *sig)
 {
 	unsigned long lock_flags;
 	uint32_t reg;
@@ -591,17 +591,17 @@ static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
 
 	/* DI settings */
 	old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
-	old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
-		sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
-		sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+	old_conf |= sig->datamask_en << DI_D3_DATAMSK_SHIFT |
+		sig->clksel_en << DI_D3_CLK_SEL_SHIFT |
+		sig->clkidle_en << DI_D3_CLK_IDLE_SHIFT;
 	mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
 
 	old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
-	old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
-		sig.clk_pol << DI_D3_CLK_POL_SHIFT |
-		sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
-		sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
-		sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+	old_conf |= sig->data_pol << DI_D3_DATA_POL_SHIFT |
+		sig->clk_pol << DI_D3_CLK_POL_SHIFT |
+		sig->enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+		sig->Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+		sig->Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
 	mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
 
 	map = &di_mappings[mx3fb->disp_data_fmt];
@@ -855,7 +855,7 @@ static int __set_par(struct fb_info *fbi, bool lock)
 				   fbi->var.upper_margin,
 				   fbi->var.vsync_len,
 				   fbi->var.lower_margin +
-				   fbi->var.vsync_len, sig_cfg) != 0) {
+				   fbi->var.vsync_len, &sig_cfg) != 0) {
 			dev_err(fbi->device,
 				"mx3fb: Error initializing panel.\n");
 			return -EINVAL;
diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
index e8a304f84ea8..1a9d6242916e 100644
--- a/drivers/video/fbdev/omap/omapfb_main.c
+++ b/drivers/video/fbdev/omap/omapfb_main.c
@@ -1247,7 +1247,7 @@ static ssize_t omapfb_show_caps_num(struct device *dev,
 	size = 0;
 	while (size < PAGE_SIZE && plane < OMAPFB_PLANE_NUM) {
 		omapfb_get_caps(fbdev, plane, &caps);
-		size += snprintf(&buf[size], PAGE_SIZE - size,
+		size += scnprintf(&buf[size], PAGE_SIZE - size,
 			"plane#%d %#010x %#010x %#010x\n",
 			plane, caps.ctrl, caps.plane_color, caps.wnd_color);
 		plane++;
@@ -1268,28 +1268,28 @@ static ssize_t omapfb_show_caps_text(struct device *dev,
 	size = 0;
 	while (size < PAGE_SIZE && plane < OMAPFB_PLANE_NUM) {
 		omapfb_get_caps(fbdev, plane, &caps);
-		size += snprintf(&buf[size], PAGE_SIZE - size,
+		size += scnprintf(&buf[size], PAGE_SIZE - size,
 				 "plane#%d:\n", plane);
 		for (i = 0; i < ARRAY_SIZE(ctrl_caps) &&
 		     size < PAGE_SIZE; i++) {
 			if (ctrl_caps[i].flag & caps.ctrl)
-				size += snprintf(&buf[size], PAGE_SIZE - size,
+				size += scnprintf(&buf[size], PAGE_SIZE - size,
 					" %s\n", ctrl_caps[i].name);
 		}
-		size += snprintf(&buf[size], PAGE_SIZE - size,
+		size += scnprintf(&buf[size], PAGE_SIZE - size,
 				 " plane colors:\n");
 		for (i = 0; i < ARRAY_SIZE(color_caps) &&
 		     size < PAGE_SIZE; i++) {
 			if (color_caps[i].flag & caps.plane_color)
-				size += snprintf(&buf[size], PAGE_SIZE - size,
+				size += scnprintf(&buf[size], PAGE_SIZE - size,
 					"  %s\n", color_caps[i].name);
 		}
-		size += snprintf(&buf[size], PAGE_SIZE - size,
+		size += scnprintf(&buf[size], PAGE_SIZE - size,
 				 " window colors:\n");
 		for (i = 0; i < ARRAY_SIZE(color_caps) &&
 		     size < PAGE_SIZE; i++) {
 			if (color_caps[i].flag & caps.wnd_color)
-				size += snprintf(&buf[size], PAGE_SIZE - size,
+				size += scnprintf(&buf[size], PAGE_SIZE - size,
 					"  %s\n", color_caps[i].name);
 		}
 
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dispc.c b/drivers/video/fbdev/omap2/omapfb/dss/dispc.c
index ce37da85cc45..4a16798b2ecd 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dispc.c
@@ -557,11 +557,6 @@ u32 dispc_mgr_get_sync_lost_irq(enum omap_channel channel)
 }
 EXPORT_SYMBOL(dispc_mgr_get_sync_lost_irq);
 
-u32 dispc_wb_get_framedone_irq(void)
-{
-	return DISPC_IRQ_FRAMEDONEWB;
-}
-
 bool dispc_mgr_go_busy(enum omap_channel channel)
 {
 	return mgr_fld_read(channel, DISPC_MGR_FLD_GO) == 1;
@@ -579,30 +574,6 @@ void dispc_mgr_go(enum omap_channel channel)
 }
 EXPORT_SYMBOL(dispc_mgr_go);
 
-bool dispc_wb_go_busy(void)
-{
-	return REG_GET(DISPC_CONTROL2, 6, 6) == 1;
-}
-
-void dispc_wb_go(void)
-{
-	enum omap_plane plane = OMAP_DSS_WB;
-	bool enable, go;
-
-	enable = REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0) == 1;
-
-	if (!enable)
-		return;
-
-	go = REG_GET(DISPC_CONTROL2, 6, 6) == 1;
-	if (go) {
-		DSSERR("GO bit not down for WB\n");
-		return;
-	}
-
-	REG_FLD_MOD(DISPC_CONTROL2, 1, 6, 6);
-}
-
 static void dispc_ovl_write_firh_reg(enum omap_plane plane, int reg, u32 value)
 {
 	dispc_write_reg(DISPC_OVL_FIR_COEF_H(plane, reg), value);
@@ -1028,13 +999,6 @@ static enum omap_channel dispc_ovl_get_channel_out(enum omap_plane plane)
 	}
 }
 
-void dispc_wb_set_channel_in(enum dss_writeback_channel channel)
-{
-	enum omap_plane plane = OMAP_DSS_WB;
-
-	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), channel, 18, 16);
-}
-
 static void dispc_ovl_set_burst_size(enum omap_plane plane,
 		enum omap_burst_size burst_size)
 {
@@ -2805,74 +2769,6 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 }
 EXPORT_SYMBOL(dispc_ovl_setup);
 
-int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
-		bool mem_to_mem, const struct omap_video_timings *mgr_timings)
-{
-	int r;
-	u32 l;
-	enum omap_plane plane = OMAP_DSS_WB;
-	const int pos_x = 0, pos_y = 0;
-	const u8 zorder = 0, global_alpha = 0;
-	const bool replication = false;
-	bool truncation;
-	int in_width = mgr_timings->x_res;
-	int in_height = mgr_timings->y_res;
-	enum omap_overlay_caps caps =
-		OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA;
-
-	DSSDBG("dispc_wb_setup, pa %x, pa_uv %x, %d,%d -> %dx%d, cmode %x, "
-		"rot %d, mir %d\n", wi->paddr, wi->p_uv_addr, in_width,
-		in_height, wi->width, wi->height, wi->color_mode, wi->rotation,
-		wi->mirror);
-
-	r = dispc_ovl_setup_common(plane, caps, wi->paddr, wi->p_uv_addr,
-		wi->buf_width, pos_x, pos_y, in_width, in_height, wi->width,
-		wi->height, wi->color_mode, wi->rotation, wi->mirror, zorder,
-		wi->pre_mult_alpha, global_alpha, wi->rotation_type,
-		replication, mgr_timings, mem_to_mem);
-
-	switch (wi->color_mode) {
-	case OMAP_DSS_COLOR_RGB16:
-	case OMAP_DSS_COLOR_RGB24P:
-	case OMAP_DSS_COLOR_ARGB16:
-	case OMAP_DSS_COLOR_RGBA16:
-	case OMAP_DSS_COLOR_RGB12U:
-	case OMAP_DSS_COLOR_ARGB16_1555:
-	case OMAP_DSS_COLOR_XRGB16_1555:
-	case OMAP_DSS_COLOR_RGBX16:
-		truncation = true;
-		break;
-	default:
-		truncation = false;
-		break;
-	}
-
-	/* setup extra DISPC_WB_ATTRIBUTES */
-	l = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane));
-	l = FLD_MOD(l, truncation, 10, 10);	/* TRUNCATIONENABLE */
-	l = FLD_MOD(l, mem_to_mem, 19, 19);	/* WRITEBACKMODE */
-	if (mem_to_mem)
-		l = FLD_MOD(l, 1, 26, 24);	/* CAPTUREMODE */
-	else
-		l = FLD_MOD(l, 0, 26, 24);	/* CAPTUREMODE */
-	dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), l);
-
-	if (mem_to_mem) {
-		/* WBDELAYCOUNT */
-		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), 0, 7, 0);
-	} else {
-		int wbdelay;
-
-		wbdelay = min(mgr_timings->vfp + mgr_timings->vsw +
-			mgr_timings->vbp, 255);
-
-		/* WBDELAYCOUNT */
-		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), wbdelay, 7, 0);
-	}
-
-	return r;
-}
-
 int dispc_ovl_enable(enum omap_plane plane, bool enable)
 {
 	DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
@@ -2903,16 +2799,6 @@ bool dispc_mgr_is_enabled(enum omap_channel channel)
 }
 EXPORT_SYMBOL(dispc_mgr_is_enabled);
 
-void dispc_wb_enable(bool enable)
-{
-	dispc_ovl_enable(OMAP_DSS_WB, enable);
-}
-
-bool dispc_wb_is_enabled(void)
-{
-	return dispc_ovl_enabled(OMAP_DSS_WB);
-}
-
 static void dispc_lcd_enable_signal_polarity(bool act_high)
 {
 	if (!dss_has_feature(FEAT_LCDENABLEPOL))
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.h b/drivers/video/fbdev/omap2/omapfb/dss/dss.h
index a2269008590f..21cfcbf74a6d 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/dss.h
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.h
@@ -89,17 +89,6 @@ enum dss_dsi_content_type {
 	DSS_DSI_CONTENT_GENERIC,
 };
 
-enum dss_writeback_channel {
-	DSS_WB_LCD1_MGR =	0,
-	DSS_WB_LCD2_MGR =	1,
-	DSS_WB_TV_MGR =		2,
-	DSS_WB_OVL0 =		3,
-	DSS_WB_OVL1 =		4,
-	DSS_WB_OVL2 =		5,
-	DSS_WB_OVL3 =		6,
-	DSS_WB_LCD3_MGR =	7,
-};
-
 enum dss_pll_id {
 	DSS_PLL_DSI1,
 	DSS_PLL_DSI2,
@@ -403,15 +392,6 @@ int dispc_mgr_get_clock_div(enum omap_channel channel,
 		struct dispc_clock_info *cinfo);
 void dispc_set_tv_pclk(unsigned long pclk);
 
-u32 dispc_wb_get_framedone_irq(void);
-bool dispc_wb_go_busy(void);
-void dispc_wb_go(void);
-void dispc_wb_enable(bool enable);
-bool dispc_wb_is_enabled(void);
-void dispc_wb_set_channel_in(enum dss_writeback_channel channel);
-int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
-		bool mem_to_mem, const struct omap_video_timings *timings);
-
 u32 dispc_read_irqstatus(void);
 void dispc_clear_irqstatus(u32 mask);
 u32 dispc_read_irqenable(void);
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/venc.c b/drivers/video/fbdev/omap2/omapfb/dss/venc.c
index f81e2a46366d..d5404d56c922 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/venc.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/venc.c
@@ -209,49 +209,6 @@ static const struct venc_config venc_config_ntsc_trm = {
 	.gen_ctrl				= 0x00F90000,
 };
 
-static const struct venc_config venc_config_pal_bdghi = {
-	.f_control				= 0,
-	.vidout_ctrl				= 0,
-	.sync_ctrl				= 0,
-	.hfltr_ctrl				= 0,
-	.x_color				= 0,
-	.line21					= 0,
-	.ln_sel					= 21,
-	.htrigger_vtrigger			= 0,
-	.tvdetgp_int_start_stop_x		= 0x00140001,
-	.tvdetgp_int_start_stop_y		= 0x00010001,
-	.gen_ctrl				= 0x00FB0000,
-
-	.llen					= 864-1,
-	.flens					= 625-1,
-	.cc_carr_wss_carr			= 0x2F7625ED,
-	.c_phase				= 0xDF,
-	.gain_u					= 0x111,
-	.gain_v					= 0x181,
-	.gain_y					= 0x140,
-	.black_level				= 0x3e,
-	.blank_level				= 0x3e,
-	.m_control				= 0<<2 | 1<<1,
-	.bstamp_wss_data			= 0x42,
-	.s_carr					= 0x2a098acb,
-	.l21__wc_ctl				= 0<<13 | 0x16<<8 | 0<<0,
-	.savid__eavid				= 0x06A70108,
-	.flen__fal				= 23<<16 | 624<<0,
-	.lal__phase_reset			= 2<<17 | 310<<0,
-	.hs_int_start_stop_x			= 0x00920358,
-	.hs_ext_start_stop_x			= 0x000F035F,
-	.vs_int_start_x				= 0x1a7<<16,
-	.vs_int_stop_x__vs_int_start_y		= 0x000601A7,
-	.vs_int_stop_y__vs_ext_start_x		= 0x01AF0036,
-	.vs_ext_stop_x__vs_ext_start_y		= 0x27101af,
-	.vs_ext_stop_y				= 0x05,
-	.avid_start_stop_x			= 0x03530082,
-	.avid_start_stop_y			= 0x0270002E,
-	.fid_int_start_x__fid_int_start_y	= 0x0005008A,
-	.fid_int_offset_y__fid_ext_start_x	= 0x002E0138,
-	.fid_ext_start_y__fid_ext_offset_y	= 0x01380005,
-};
-
 const struct omap_video_timings omap_dss_pal_timings = {
 	.x_res		= 720,
 	.y_res		= 574,
diff --git a/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c b/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
index 4a5db170ef59..2d39dbfa742e 100644
--- a/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
@@ -147,11 +147,11 @@ static ssize_t show_overlays(struct device *dev,
 			if (ovl == fbdev->overlays[ovlnum])
 				break;
 
-		l += snprintf(buf + l, PAGE_SIZE - l, "%s%d",
+		l += scnprintf(buf + l, PAGE_SIZE - l, "%s%d",
 				t == 0 ? "" : ",", ovlnum);
 	}
 
-	l += snprintf(buf + l, PAGE_SIZE - l, "\n");
+	l += scnprintf(buf + l, PAGE_SIZE - l, "\n");
 
 	omapfb_unlock(fbdev);
 	unlock_fb_info(fbi);
@@ -328,11 +328,11 @@ static ssize_t show_overlays_rotate(struct device *dev,
 	lock_fb_info(fbi);
 
 	for (t = 0; t < ofbi->num_overlays; t++) {
-		l += snprintf(buf + l, PAGE_SIZE - l, "%s%d",
+		l += scnprintf(buf + l, PAGE_SIZE - l, "%s%d",
 				t == 0 ? "" : ",", ofbi->rotation[t]);
 	}
 
-	l += snprintf(buf + l, PAGE_SIZE - l, "\n");
+	l += scnprintf(buf + l, PAGE_SIZE - l, "\n");
 
 	unlock_fb_info(fbi);
 
diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index fe2cadeb1b66..c7c98d8e2359 100644
--- a/drivers/video/fbdev/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
@@ -54,7 +54,7 @@
 #define DPRINTK(a, b...)	\
 	printk(KERN_DEBUG "pm2fb: %s: " a, __func__ , ## b)
 #else
-#define DPRINTK(a, b...)
+#define DPRINTK(a, b...)	no_printk(a, ##b)
 #endif
 
 #define PM2_PIXMAP_SIZE	(1600 * 4)
diff --git a/drivers/video/fbdev/pm3fb.c b/drivers/video/fbdev/pm3fb.c
index 2f5e23c8f8ec..7497bd36334c 100644
--- a/drivers/video/fbdev/pm3fb.c
+++ b/drivers/video/fbdev/pm3fb.c
@@ -44,7 +44,7 @@
 #define DPRINTK(a, b...)	\
 	printk(KERN_DEBUG "pm3fb: %s: " a, __func__ , ## b)
 #else
-#define DPRINTK(a, b...)
+#define DPRINTK(a, b...)	no_printk(a, ##b)
 #endif
 
 #define PM3_PIXMAP_SIZE	(2048 * 4)
@@ -306,7 +306,7 @@ static void pm3fb_init_engine(struct fb_info *info)
 					   PM3PixelSize_GLOBAL_32BIT);
 			break;
 		default:
-			DPRINTK(1, "Unsupported depth %d\n",
+			DPRINTK("Unsupported depth %d\n",
 				info->var.bits_per_pixel);
 			break;
 		}
@@ -349,8 +349,8 @@ static void pm3fb_init_engine(struct fb_info *info)
 					   (1 << 10) | (0 << 3));
 			break;
 		default:
-			DPRINTK(1, "Unsupported depth %d\n",
-				info->current_par->depth);
+			DPRINTK("Unsupported depth %d\n",
+				info->var.bits_per_pixel);
 			break;
 		}
 	}
diff --git a/drivers/video/fbdev/riva/riva_hw.c b/drivers/video/fbdev/riva/riva_hw.c
index 0601c13f2105..08c9ee46978e 100644
--- a/drivers/video/fbdev/riva/riva_hw.c
+++ b/drivers/video/fbdev/riva/riva_hw.c
@@ -1343,24 +1343,6 @@ int CalcStateExt
 /*
  * Load fixed function state and pre-calculated/stored state.
  */
-#if 0
-#define LOAD_FIXED_STATE(tbl,dev)                                       \
-    for (i = 0; i < sizeof(tbl##Table##dev)/8; i++)                 \
-        chip->dev[tbl##Table##dev[i][0]] = tbl##Table##dev[i][1]
-#define LOAD_FIXED_STATE_8BPP(tbl,dev)                                  \
-    for (i = 0; i < sizeof(tbl##Table##dev##_8BPP)/8; i++)            \
-        chip->dev[tbl##Table##dev##_8BPP[i][0]] = tbl##Table##dev##_8BPP[i][1]
-#define LOAD_FIXED_STATE_15BPP(tbl,dev)                                 \
-    for (i = 0; i < sizeof(tbl##Table##dev##_15BPP)/8; i++)           \
-        chip->dev[tbl##Table##dev##_15BPP[i][0]] = tbl##Table##dev##_15BPP[i][1]
-#define LOAD_FIXED_STATE_16BPP(tbl,dev)                                 \
-    for (i = 0; i < sizeof(tbl##Table##dev##_16BPP)/8; i++)           \
-        chip->dev[tbl##Table##dev##_16BPP[i][0]] = tbl##Table##dev##_16BPP[i][1]
-#define LOAD_FIXED_STATE_32BPP(tbl,dev)                                 \
-    for (i = 0; i < sizeof(tbl##Table##dev##_32BPP)/8; i++)           \
-        chip->dev[tbl##Table##dev##_32BPP[i][0]] = tbl##Table##dev##_32BPP[i][1]
-#endif
-
 #define LOAD_FIXED_STATE(tbl,dev)                                       \
     for (i = 0; i < sizeof(tbl##Table##dev)/8; i++)                 \
         NV_WR32(&chip->dev[tbl##Table##dev[i][0]], 0, tbl##Table##dev[i][1])
diff --git a/drivers/video/fbdev/s1d13xxxfb.c b/drivers/video/fbdev/s1d13xxxfb.c
index eaea8c373753..4541afcf9386 100644
--- a/drivers/video/fbdev/s1d13xxxfb.c
+++ b/drivers/video/fbdev/s1d13xxxfb.c
@@ -721,9 +721,7 @@ static void s1d13xxxfb_fetch_hw_state(struct fb_info *info)
 		xres, yres, xres_virtual, yres_virtual, is_color, is_dual, is_tft);
 }
 
-
-static int
-s1d13xxxfb_remove(struct platform_device *pdev)
+static void __s1d13xxxfb_remove(struct platform_device *pdev)
 {
 	struct fb_info *info = platform_get_drvdata(pdev);
 	struct s1d13xxxfb_par *par = NULL;
@@ -749,6 +747,14 @@ s1d13xxxfb_remove(struct platform_device *pdev)
 			   resource_size(&pdev->resource[0]));
 	release_mem_region(pdev->resource[1].start,
 			   resource_size(&pdev->resource[1]));
+}
+
+static int s1d13xxxfb_remove(struct platform_device *pdev)
+{
+	struct fb_info *info = platform_get_drvdata(pdev);
+
+	unregister_framebuffer(info);
+	__s1d13xxxfb_remove(pdev);
 	return 0;
 }
 
@@ -895,7 +901,7 @@ static int s1d13xxxfb_probe(struct platform_device *pdev)
 	return 0;
 
 bail:
-	s1d13xxxfb_remove(pdev);
+	__s1d13xxxfb_remove(pdev);
 	return ret;
 
 }
diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 2d285cc384cf..3e6e13f7a831 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
@@ -173,7 +173,7 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
@@ -799,8 +799,8 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 	writel_relaxed(fbi->dbar2, fbi->base + DBAR2);
 	writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0);
 
-	if (machine_is_shannon())
-		gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
+	if (fbi->shannon_lcden)
+		gpiod_set_value(fbi->shannon_lcden, 1);
 
 	dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1));
 	dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
@@ -817,8 +817,8 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 
 	dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
-	if (machine_is_shannon())
-		gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
+	if (fbi->shannon_lcden)
+		gpiod_set_value(fbi->shannon_lcden, 0);
 
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	add_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1173,12 +1173,10 @@ static int sa1100fb_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (machine_is_shannon()) {
-		ret = devm_gpio_request_one(&pdev->dev, SHANNON_GPIO_DISP_EN,
-			GPIOF_OUT_INIT_LOW, "display enable");
-		if (ret)
-			return ret;
-	}
+	fbi->shannon_lcden = gpiod_get_optional(&pdev->dev, "shannon-lcden",
+						GPIOD_OUT_LOW);
+	if (IS_ERR(fbi->shannon_lcden))
+		return PTR_ERR(fbi->shannon_lcden);
 
 	/* Initialize video memory */
 	ret = sa1100fb_map_video_memory(fbi);
diff --git a/drivers/video/fbdev/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index d0aa33b0b88a..b4363444fa5d 100644
--- a/drivers/video/fbdev/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h
@@ -10,6 +10,8 @@
  * for more details.
  */
 
+struct gpio_desc;
+
 #define LCCR0           0x0000          /* LCD Control Reg. 0 */
 #define LCSR            0x0004          /* LCD Status Reg. */
 #define DBAR1           0x0010          /* LCD DMA Base Address Reg. channel 1 */
@@ -33,6 +35,7 @@ struct sa1100fb_info {
 	struct device		*dev;
 	const struct sa1100fb_rgb *rgb[NR_RGB];
 	void __iomem		*base;
+	struct gpio_desc	*shannon_lcden;
 
 	/*
 	 * These are the addresses we mapped
diff --git a/drivers/video/fbdev/savage/savagefb.h b/drivers/video/fbdev/savage/savagefb.h
index aba04afe712d..3314d5b6b43b 100644
--- a/drivers/video/fbdev/savage/savagefb.h
+++ b/drivers/video/fbdev/savage/savagefb.h
@@ -21,7 +21,7 @@
 #ifdef SAVAGEFB_DEBUG
 # define DBG(x)		printk (KERN_DEBUG "savagefb: %s\n", (x));
 #else
-# define DBG(x)
+# define DBG(x)		no_printk(x)
 # define SavagePrintRegs(...)
 #endif
 
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 12fa1050f3eb..8e06ba912d60 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -12,8 +12,7 @@
 #include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/of_gpio.h>
+#include <linux/property.h>
 #include <linux/pwm.h>
 #include <linux/uaccess.h>
 #include <linux/regulator/consumer.h>
@@ -49,8 +48,6 @@
 static u_int refreshrate = REFRESHRATE;
 module_param(refreshrate, uint, 0);
 
-struct ssd1307fb_par;
-
 struct ssd1307fb_deviceinfo {
 	u32 default_vcomh;
 	u32 default_dclk_div;
@@ -80,7 +77,6 @@ struct ssd1307fb_par {
 	u32 prechargep1;
 	u32 prechargep2;
 	struct pwm_device *pwm;
-	u32 pwm_period;
 	struct gpio_desc *reset;
 	struct regulator *vbat_reg;
 	u32 vcomh;
@@ -298,9 +294,9 @@ static void ssd1307fb_deferred_io(struct fb_info *info,
 
 static int ssd1307fb_init(struct ssd1307fb_par *par)
 {
+	struct pwm_state pwmstate;
 	int ret;
 	u32 precharge, dclk, com_invdir, compins;
-	struct pwm_args pargs;
 
 	if (par->device_info->need_pwm) {
 		par->pwm = pwm_get(&par->client->dev, NULL);
@@ -309,21 +305,15 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
 			return PTR_ERR(par->pwm);
 		}
 
-		/*
-		 * FIXME: pwm_apply_args() should be removed when switching to
-		 * the atomic PWM API.
-		 */
-		pwm_apply_args(par->pwm);
-
-		pwm_get_args(par->pwm, &pargs);
+		pwm_init_state(par->pwm, &pwmstate);
+		pwm_set_relative_duty_cycle(&pwmstate, 50, 100);
+		pwm_apply_state(par->pwm, &pwmstate);
 
-		par->pwm_period = pargs.period;
 		/* Enable the PWM */
-		pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
 		pwm_enable(par->pwm);
 
 		dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
-			par->pwm->pwm, par->pwm_period);
+			par->pwm->pwm, pwm_get_period(par->pwm));
 	}
 
 	/* Set initial contrast */
@@ -586,25 +576,19 @@ static const struct of_device_id ssd1307fb_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ssd1307fb_of_match);
 
-static int ssd1307fb_probe(struct i2c_client *client,
-			   const struct i2c_device_id *id)
+static int ssd1307fb_probe(struct i2c_client *client)
 {
+	struct device *dev = &client->dev;
 	struct backlight_device *bl;
 	char bl_name[12];
 	struct fb_info *info;
-	struct device_node *node = client->dev.of_node;
 	struct fb_deferred_io *ssd1307fb_defio;
 	u32 vmem_size;
 	struct ssd1307fb_par *par;
 	void *vmem;
 	int ret;
 
-	if (!node) {
-		dev_err(&client->dev, "No device tree data found!\n");
-		return -EINVAL;
-	}
-
-	info = framebuffer_alloc(sizeof(struct ssd1307fb_par), &client->dev);
+	info = framebuffer_alloc(sizeof(struct ssd1307fb_par), dev);
 	if (!info)
 		return -ENOMEM;
 
@@ -612,67 +596,65 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	par->info = info;
 	par->client = client;
 
-	par->device_info = of_device_get_match_data(&client->dev);
+	par->device_info = device_get_match_data(dev);
 
-	par->reset = devm_gpiod_get_optional(&client->dev, "reset",
-					     GPIOD_OUT_LOW);
+	par->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(par->reset)) {
-		dev_err(&client->dev, "failed to get reset gpio: %ld\n",
+		dev_err(dev, "failed to get reset gpio: %ld\n",
 			PTR_ERR(par->reset));
 		ret = PTR_ERR(par->reset);
 		goto fb_alloc_error;
 	}
 
-	par->vbat_reg = devm_regulator_get_optional(&client->dev, "vbat");
+	par->vbat_reg = devm_regulator_get_optional(dev, "vbat");
 	if (IS_ERR(par->vbat_reg)) {
 		ret = PTR_ERR(par->vbat_reg);
 		if (ret == -ENODEV) {
 			par->vbat_reg = NULL;
 		} else {
-			dev_err(&client->dev, "failed to get VBAT regulator: %d\n",
-				ret);
+			dev_err(dev, "failed to get VBAT regulator: %d\n", ret);
 			goto fb_alloc_error;
 		}
 	}
 
-	if (of_property_read_u32(node, "solomon,width", &par->width))
+	if (device_property_read_u32(dev, "solomon,width", &par->width))
 		par->width = 96;
 
-	if (of_property_read_u32(node, "solomon,height", &par->height))
+	if (device_property_read_u32(dev, "solomon,height", &par->height))
 		par->height = 16;
 
-	if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset))
+	if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset))
 		par->page_offset = 1;
 
-	if (of_property_read_u32(node, "solomon,com-offset", &par->com_offset))
+	if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
 		par->com_offset = 0;
 
-	if (of_property_read_u32(node, "solomon,prechargep1", &par->prechargep1))
+	if (device_property_read_u32(dev, "solomon,prechargep1", &par->prechargep1))
 		par->prechargep1 = 2;
 
-	if (of_property_read_u32(node, "solomon,prechargep2", &par->prechargep2))
+	if (device_property_read_u32(dev, "solomon,prechargep2", &par->prechargep2))
 		par->prechargep2 = 2;
 
-	if (!of_property_read_u8_array(node, "solomon,lookup-table",
-				       par->lookup_table,
-				       ARRAY_SIZE(par->lookup_table)))
+	if (!device_property_read_u8_array(dev, "solomon,lookup-table",
+					   par->lookup_table,
+					   ARRAY_SIZE(par->lookup_table)))
 		par->lookup_table_set = 1;
 
-	par->seg_remap = !of_property_read_bool(node, "solomon,segment-no-remap");
-	par->com_seq = of_property_read_bool(node, "solomon,com-seq");
-	par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap");
-	par->com_invdir = of_property_read_bool(node, "solomon,com-invdir");
+	par->seg_remap = !device_property_read_bool(dev, "solomon,segment-no-remap");
+	par->com_seq = device_property_read_bool(dev, "solomon,com-seq");
+	par->com_lrremap = device_property_read_bool(dev, "solomon,com-lrremap");
+	par->com_invdir = device_property_read_bool(dev, "solomon,com-invdir");
 	par->area_color_enable =
-		of_property_read_bool(node, "solomon,area-color-enable");
-	par->low_power = of_property_read_bool(node, "solomon,low-power");
+		device_property_read_bool(dev, "solomon,area-color-enable");
+	par->low_power = device_property_read_bool(dev, "solomon,low-power");
 
 	par->contrast = 127;
 	par->vcomh = par->device_info->default_vcomh;
 
 	/* Setup display timing */
-	if (of_property_read_u32(node, "solomon,dclk-div", &par->dclk_div))
+	if (device_property_read_u32(dev, "solomon,dclk-div", &par->dclk_div))
 		par->dclk_div = par->device_info->default_dclk_div;
-	if (of_property_read_u32(node, "solomon,dclk-frq", &par->dclk_frq))
+	if (device_property_read_u32(dev, "solomon,dclk-frq", &par->dclk_frq))
 		par->dclk_frq = par->device_info->default_dclk_frq;
 
 	vmem_size = DIV_ROUND_UP(par->width, 8) * par->height;
@@ -680,15 +662,15 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 					get_order(vmem_size));
 	if (!vmem) {
-		dev_err(&client->dev, "Couldn't allocate graphical memory.\n");
+		dev_err(dev, "Couldn't allocate graphical memory.\n");
 		ret = -ENOMEM;
 		goto fb_alloc_error;
 	}
 
-	ssd1307fb_defio = devm_kzalloc(&client->dev, sizeof(*ssd1307fb_defio),
+	ssd1307fb_defio = devm_kzalloc(dev, sizeof(*ssd1307fb_defio),
 				       GFP_KERNEL);
 	if (!ssd1307fb_defio) {
-		dev_err(&client->dev, "Couldn't allocate deferred io.\n");
+		dev_err(dev, "Couldn't allocate deferred io.\n");
 		ret = -ENOMEM;
 		goto fb_alloc_error;
 	}
@@ -726,8 +708,7 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	if (par->vbat_reg) {
 		ret = regulator_enable(par->vbat_reg);
 		if (ret) {
-			dev_err(&client->dev, "failed to enable VBAT: %d\n",
-				ret);
+			dev_err(dev, "failed to enable VBAT: %d\n", ret);
 			goto reset_oled_error;
 		}
 	}
@@ -738,17 +719,16 @@ static int ssd1307fb_probe(struct i2c_client *client,
 
 	ret = register_framebuffer(info);
 	if (ret) {
-		dev_err(&client->dev, "Couldn't register the framebuffer\n");
+		dev_err(dev, "Couldn't register the framebuffer\n");
 		goto panel_init_error;
 	}
 
 	snprintf(bl_name, sizeof(bl_name), "ssd1307fb%d", info->node);
-	bl = backlight_device_register(bl_name, &client->dev, par,
-				       &ssd1307fb_bl_ops, NULL);
+	bl = backlight_device_register(bl_name, dev, par, &ssd1307fb_bl_ops,
+				       NULL);
 	if (IS_ERR(bl)) {
 		ret = PTR_ERR(bl);
-		dev_err(&client->dev, "unable to register backlight device: %d\n",
-			ret);
+		dev_err(dev, "unable to register backlight device: %d\n", ret);
 		goto bl_init_error;
 	}
 
@@ -756,7 +736,7 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	bl->props.max_brightness = MAX_CONTRAST;
 	info->bl_dev = bl;
 
-	dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
+	dev_info(dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
 
 	return 0;
 
@@ -810,7 +790,7 @@ static const struct i2c_device_id ssd1307fb_i2c_id[] = {
 MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id);
 
 static struct i2c_driver ssd1307fb_driver = {
-	.probe = ssd1307fb_probe,
+	.probe_new = ssd1307fb_probe,
 	.remove = ssd1307fb_remove,
 	.id_table = ssd1307fb_i2c_id,
 	.driver = {
diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 53d08d1b56f5..1b385cf76110 100644
--- a/drivers/video/fbdev/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
@@ -1560,7 +1560,7 @@ static ssize_t uvesafb_show_vbe_modes(struct device *dev,
 	int ret = 0, i;
 
 	for (i = 0; i < par->vbe_modes_cnt && ret < PAGE_SIZE; i++) {
-		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+		ret += scnprintf(buf + ret, PAGE_SIZE - ret,
 			"%dx%d-%d, 0x%.4x\n",
 			par->vbe_modes[i].x_res, par->vbe_modes[i].y_res,
 			par->vbe_modes[i].depth, par->vbe_modes[i].mode_id);
diff --git a/drivers/video/fbdev/vesafb.c b/drivers/video/fbdev/vesafb.c
index a1fe24ea869b..df6de5a9dd4c 100644
--- a/drivers/video/fbdev/vesafb.c
+++ b/drivers/video/fbdev/vesafb.c
@@ -32,6 +32,7 @@
 struct vesafb_par {
 	u32 pseudo_palette[256];
 	int wc_cookie;
+	struct resource *region;
 };
 
 static struct fb_var_screeninfo vesafb_defined = {
@@ -411,7 +412,7 @@ static int vesafb_probe(struct platform_device *dev)
 
 	/* request failure does not faze us, as vgacon probably has this
 	 * region already (FIXME) */
-	request_region(0x3c0, 32, "vesafb");
+	par->region = request_region(0x3c0, 32, "vesafb");
 
 	if (mtrr == 3) {
 		unsigned int temp_size = size_total;
@@ -439,7 +440,7 @@ static int vesafb_probe(struct platform_device *dev)
 		       "vesafb: abort, cannot ioremap video memory 0x%x @ 0x%lx\n",
 			vesafb_fix.smem_len, vesafb_fix.smem_start);
 		err = -EIO;
-		goto err;
+		goto err_release_region;
 	}
 
 	printk(KERN_INFO "vesafb: framebuffer at 0x%lx, mapped to 0x%p, "
@@ -458,19 +459,22 @@ static int vesafb_probe(struct platform_device *dev)
 
 	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
 		err = -ENOMEM;
-		goto err;
+		goto err_release_region;
 	}
 	if (register_framebuffer(info)<0) {
 		err = -EINVAL;
 		fb_dealloc_cmap(&info->cmap);
-		goto err;
+		goto err_release_region;
 	}
 	fb_info(info, "%s frame buffer device\n", info->fix.id);
 	return 0;
-err:
+err_release_region:
 	arch_phys_wc_del(par->wc_cookie);
 	if (info->screen_base)
 		iounmap(info->screen_base);
+	if (par->region)
+		release_region(0x3c0, 32);
+err:
 	framebuffer_release(info);
 	release_mem_region(vesafb_fix.smem_start, size_total);
 	return err;
@@ -481,6 +485,8 @@ static int vesafb_remove(struct platform_device *pdev)
 	struct fb_info *info = platform_get_drvdata(pdev);
 
 	unregister_framebuffer(info);
+	if (((struct vesafb_par *)(info->par))->region)
+		release_region(0x3c0, 32);
 	framebuffer_release(info);
 
 	return 0;
diff --git a/drivers/video/fbdev/via/debug.h b/drivers/video/fbdev/via/debug.h
index 6a320bd76936..80fdfe4171c5 100644
--- a/drivers/video/fbdev/via/debug.h
+++ b/drivers/video/fbdev/via/debug.h
@@ -7,6 +7,8 @@
 #ifndef __DEBUG_H__
 #define __DEBUG_H__
 
+#include <linux/printk.h>
+
 #ifndef VIAFB_DEBUG
 #define VIAFB_DEBUG 0
 #endif
@@ -14,14 +16,14 @@
 #if VIAFB_DEBUG
 #define DEBUG_MSG(f, a...)   printk(f, ## a)
 #else
-#define DEBUG_MSG(f, a...)
+#define DEBUG_MSG(f, a...)   no_printk(f, ## a)
 #endif
 
 #define VIAFB_WARN 0
 #if VIAFB_WARN
 #define WARN_MSG(f, a...)   printk(f, ## a)
 #else
-#define WARN_MSG(f, a...)
+#define WARN_MSG(f, a...)   no_printk(f, ## a)
 #endif
 
 #endif /* __DEBUG_H__ */
diff --git a/drivers/video/fbdev/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c
index 852673c40a2f..22deb340a048 100644
--- a/drivers/video/fbdev/via/viafbdev.c
+++ b/drivers/video/fbdev/via/viafbdev.c
@@ -1144,7 +1144,7 @@ static ssize_t viafb_dvp0_proc_write(struct file *file,
 		if (value != NULL) {
 			if (kstrtou8(value, 0, &reg_val) < 0)
 				return -EINVAL;
-			DEBUG_MSG(KERN_INFO "DVP0:reg_val[%l]=:%x\n", i,
+			DEBUG_MSG(KERN_INFO "DVP0:reg_val[%lu]=:%x\n", i,
 				  reg_val);
 			switch (i) {
 			case 0:
diff --git a/drivers/video/fbdev/vt8500lcdfb.c b/drivers/video/fbdev/vt8500lcdfb.c
index f744479dc7df..c61476247ba8 100644
--- a/drivers/video/fbdev/vt8500lcdfb.c
+++ b/drivers/video/fbdev/vt8500lcdfb.c
@@ -230,6 +230,7 @@ static int vt8500lcd_blank(int blank, struct fb_info *info)
 		    info->fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
 			for (i = 0; i < 256; i++)
 				vt8500lcd_setcolreg(i, 0, 0, 0, 0, info);
+		fallthrough;
 	case FB_BLANK_UNBLANK:
 		if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR ||
 		    info->fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 97d5725fd9a2..9d16aaffca9d 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -466,10 +466,8 @@ static int vm_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 	int irq = platform_get_irq(vm_dev->pdev, 0);
 	int i, err, queue_idx = 0;
 
-	if (irq < 0) {
-		dev_err(&vdev->dev, "Cannot get IRQ resource\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	err = request_irq(irq, vm_interrupt, IRQF_SHARED,
 			dev_name(&vdev->dev), vm_dev);
diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
index 7abcc50838b8..db93cedd262f 100644
--- a/drivers/virtio/virtio_pci_modern.c
+++ b/drivers/virtio/virtio_pci_modern.c
@@ -16,6 +16,7 @@
 
 #include <linux/delay.h>
 #define VIRTIO_PCI_NO_LEGACY
+#define VIRTIO_RING_NO_LEGACY
 #include "virtio_pci_common.h"
 
 /*
diff --git a/drivers/visorbus/controlvmchannel.h b/drivers/visorbus/controlvmchannel.h
index 8c57562a070a..c87213554427 100644
--- a/drivers/visorbus/controlvmchannel.h
+++ b/drivers/visorbus/controlvmchannel.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2010 - 2015 UNISYS CORPORATION
  * All rights reserved.
diff --git a/drivers/visorbus/vbuschannel.h b/drivers/visorbus/vbuschannel.h
index b1dce26166bf..4aaf6564eb9f 100644
--- a/drivers/visorbus/vbuschannel.h
+++ b/drivers/visorbus/vbuschannel.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2010 - 2015 UNISYS CORPORATION
  * All rights reserved.
diff --git a/drivers/visorbus/visorbus_private.h b/drivers/visorbus/visorbus_private.h
index 366380b7f8d9..6956de605827 100644
--- a/drivers/visorbus/visorbus_private.h
+++ b/drivers/visorbus/visorbus_private.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2010 - 2015 UNISYS CORPORATION
  * All rights reserved.
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index 3041092e84b3..449680a61569 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -73,7 +73,7 @@ struct w1_netlink_msg
 			__u32		res;
 		} mst;
 	} id;
-	__u8				data[0];
+	__u8				data[];
 };
 
 /**
@@ -122,7 +122,7 @@ struct w1_netlink_cmd
 	__u8				cmd;
 	__u8				res;
 	__u16				len;
-	__u8				data[0];
+	__u8				data[];
 };
 
 #ifdef __KERNEL__
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index e707c4797f76..a370a185a41c 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -64,6 +64,7 @@
 #include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
 #include <linux/io.h>			/* For inb/outb/... */
 #include <linux/platform_data/itco_wdt.h>
+#include <linux/mfd/intel_pmc_bxt.h>
 
 #include "iTCO_vendor.h"
 
@@ -233,12 +234,24 @@ static int update_no_reboot_bit_cnt(void *priv, bool set)
 	return val != newval ? -EIO : 0;
 }
 
+static int update_no_reboot_bit_pmc(void *priv, bool set)
+{
+	struct intel_pmc_dev *pmc = priv;
+	u32 bits = PMC_CFG_NO_REBOOT_EN;
+	u32 value = set ? bits : 0;
+
+	return intel_pmc_gcr_update(pmc, PMC_GCR_PMC_CFG_REG, bits, value);
+}
+
 static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p,
-		struct itco_wdt_platform_data *pdata)
+					 struct platform_device *pdev,
+					 struct itco_wdt_platform_data *pdata)
 {
-	if (pdata->update_no_reboot_bit) {
-		p->update_no_reboot_bit = pdata->update_no_reboot_bit;
-		p->no_reboot_priv = pdata->no_reboot_priv;
+	if (pdata->no_reboot_use_pmc) {
+		struct intel_pmc_dev *pmc = dev_get_drvdata(pdev->dev.parent);
+
+		p->update_no_reboot_bit = update_no_reboot_bit_pmc;
+		p->no_reboot_priv = pmc;
 		return;
 	}
 
@@ -478,14 +491,14 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	iTCO_wdt_no_reboot_bit_setup(p, pdata);
+	iTCO_wdt_no_reboot_bit_setup(p, pdev, pdata);
 
 	/*
 	 * Get the Memory-Mapped GCS or PMC register, we need it for the
 	 * NO_REBOOT flag (TCO v2 and v3).
 	 */
 	if (p->iTCO_version >= 2 && p->iTCO_version < 6 &&
-	    !pdata->update_no_reboot_bit) {
+	    !pdata->no_reboot_use_pmc) {
 		p->gcs_pmc_res = platform_get_resource(pdev,
 						       IORESOURCE_MEM,
 						       ICH_RES_MEM_GCS_PMC);
diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c
index 470213abfd3d..1ae03b64ef8b 100644
--- a/drivers/watchdog/intel-mid_wdt.c
+++ b/drivers/watchdog/intel-mid_wdt.c
@@ -33,14 +33,24 @@ enum {
 	SCU_WATCHDOG_KEEPALIVE,
 };
 
-static inline int wdt_command(int sub, u32 *in, int inlen)
+struct mid_wdt {
+	struct watchdog_device wd;
+	struct device *dev;
+	struct intel_scu_ipc_dev *scu;
+};
+
+static inline int
+wdt_command(struct mid_wdt *mid, int sub, const void *in, size_t inlen, size_t size)
 {
-	return intel_scu_ipc_command(IPC_WATCHDOG, sub, in, inlen, NULL, 0);
+	struct intel_scu_ipc_dev *scu = mid->scu;
+
+	return intel_scu_ipc_dev_command_with_size(scu, IPC_WATCHDOG, sub, in,
+						   inlen, size, NULL, 0);
 }
 
 static int wdt_start(struct watchdog_device *wd)
 {
-	struct device *dev = watchdog_get_drvdata(wd);
+	struct mid_wdt *mid = watchdog_get_drvdata(wd);
 	int ret, in_size;
 	int timeout = wd->timeout;
 	struct ipc_wd_start {
@@ -49,38 +59,41 @@ static int wdt_start(struct watchdog_device *wd)
 	} ipc_wd_start = { timeout - MID_WDT_PRETIMEOUT, timeout };
 
 	/*
-	 * SCU expects the input size for watchdog IPC to
-	 * be based on 4 bytes
+	 * SCU expects the input size for watchdog IPC to be 2 which is the
+	 * size of the structure in dwords. SCU IPC normally takes bytes
+	 * but this is a special case where we specify size to be different
+	 * than inlen.
 	 */
 	in_size = DIV_ROUND_UP(sizeof(ipc_wd_start), 4);
 
-	ret = wdt_command(SCU_WATCHDOG_START, (u32 *)&ipc_wd_start, in_size);
+	ret = wdt_command(mid, SCU_WATCHDOG_START, &ipc_wd_start,
+			  sizeof(ipc_wd_start), in_size);
 	if (ret)
-		dev_crit(dev, "error starting watchdog: %d\n", ret);
+		dev_crit(mid->dev, "error starting watchdog: %d\n", ret);
 
 	return ret;
 }
 
 static int wdt_ping(struct watchdog_device *wd)
 {
-	struct device *dev = watchdog_get_drvdata(wd);
+	struct mid_wdt *mid = watchdog_get_drvdata(wd);
 	int ret;
 
-	ret = wdt_command(SCU_WATCHDOG_KEEPALIVE, NULL, 0);
+	ret = wdt_command(mid, SCU_WATCHDOG_KEEPALIVE, NULL, 0, 0);
 	if (ret)
-		dev_crit(dev, "Error executing keepalive: %d\n", ret);
+		dev_crit(mid->dev, "Error executing keepalive: %d\n", ret);
 
 	return ret;
 }
 
 static int wdt_stop(struct watchdog_device *wd)
 {
-	struct device *dev = watchdog_get_drvdata(wd);
+	struct mid_wdt *mid = watchdog_get_drvdata(wd);
 	int ret;
 
-	ret = wdt_command(SCU_WATCHDOG_STOP, NULL, 0);
+	ret = wdt_command(mid, SCU_WATCHDOG_STOP, NULL, 0, 0);
 	if (ret)
-		dev_crit(dev, "Error stopping watchdog: %d\n", ret);
+		dev_crit(mid->dev, "Error stopping watchdog: %d\n", ret);
 
 	return ret;
 }
@@ -110,6 +123,7 @@ static int mid_wdt_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct watchdog_device *wdt_dev;
 	struct intel_mid_wdt_pdata *pdata = dev->platform_data;
+	struct mid_wdt *mid;
 	int ret;
 
 	if (!pdata) {
@@ -123,10 +137,13 @@ static int mid_wdt_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	wdt_dev = devm_kzalloc(dev, sizeof(*wdt_dev), GFP_KERNEL);
-	if (!wdt_dev)
+	mid = devm_kzalloc(dev, sizeof(*mid), GFP_KERNEL);
+	if (!mid)
 		return -ENOMEM;
 
+	mid->dev = dev;
+	wdt_dev = &mid->wd;
+
 	wdt_dev->info = &mid_wdt_info;
 	wdt_dev->ops = &mid_wdt_ops;
 	wdt_dev->min_timeout = MID_WDT_TIMEOUT_MIN;
@@ -135,7 +152,7 @@ static int mid_wdt_probe(struct platform_device *pdev)
 	wdt_dev->parent = dev;
 
 	watchdog_set_nowayout(wdt_dev, WATCHDOG_NOWAYOUT);
-	watchdog_set_drvdata(wdt_dev, dev);
+	watchdog_set_drvdata(wdt_dev, mid);
 
 	ret = devm_request_irq(dev, pdata->irq, mid_wdt_irq,
 			       IRQF_SHARED | IRQF_NO_SUSPEND, "watchdog",
@@ -145,6 +162,10 @@ static int mid_wdt_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	mid->scu = devm_intel_scu_ipc_dev_get(dev);
+	if (!mid->scu)
+		return -EPROBE_DEFER;
+
 	/*
 	 * The firmware followed by U-Boot leaves the watchdog running
 	 * with the default threshold which may vary. When we get here
diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c
index c6070e70dd73..b8ccb8990bfd 100644
--- a/drivers/xen/privcmd.c
+++ b/drivers/xen/privcmd.c
@@ -27,7 +27,6 @@
 
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
-#include <asm/tlb.h>
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
 
diff --git a/fs/Kconfig b/fs/Kconfig
index f08fbbfafd9a..d1ad3935fb85 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -166,7 +166,7 @@ config TMPFS
 	  space. If you unmount a tmpfs instance, everything stored therein is
 	  lost.
 
-	  See <file:Documentation/filesystems/tmpfs.txt> for details.
+	  See <file:Documentation/filesystems/tmpfs.rst> for details.
 
 config TMPFS_POSIX_ACL
 	bool "Tmpfs POSIX Access Control Lists"
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 62dc4f577ba1..04f86b8c100e 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -36,6 +36,12 @@ config COMPAT_BINFMT_ELF
 config ARCH_BINFMT_ELF_STATE
 	bool
 
+config ARCH_HAVE_ELF_PROT
+	bool
+
+config ARCH_USE_GNU_PROPERTY
+	bool
+
 config BINFMT_ELF_FDPIC
 	bool "Kernel support for FDPIC ELF binaries"
 	default y if !BINFMT_ELF
@@ -72,7 +78,7 @@ config CORE_DUMP_DEFAULT_ELF_HEADERS
 
 	  The core dump behavior can be controlled per process using
 	  the /proc/PID/coredump_filter pseudo-file; this setting is
-	  inherited.  See Documentation/filesystems/proc.txt for details.
+	  inherited.  See Documentation/filesystems/proc.rst for details.
 
 	  This config option changes the default setting of coredump_filter
 	  seen at boot time.  If unsure, say Y.
diff --git a/fs/adfs/Kconfig b/fs/adfs/Kconfig
index df4650dccf68..44738fed6625 100644
--- a/fs/adfs/Kconfig
+++ b/fs/adfs/Kconfig
@@ -12,7 +12,7 @@ config ADFS_FS
 
 	  The ADFS partition should be the first partition (i.e.,
 	  /dev/[hs]d?1) on each of your drives. Please read the file
-	  <file:Documentation/filesystems/adfs.txt> for further details.
+	  <file:Documentation/filesystems/adfs.rst> for further details.
 
 	  To compile this code as a module, choose M here: the module will be
 	  called adfs.
diff --git a/fs/affs/Kconfig b/fs/affs/Kconfig
index 84c46b9025c5..eb9d0ab850cb 100644
--- a/fs/affs/Kconfig
+++ b/fs/affs/Kconfig
@@ -9,7 +9,7 @@ config AFFS_FS
 	  FFS partition on your hard drive.  Amiga floppies however cannot be
 	  read with this driver due to an incompatibility of the floppy
 	  controller used in an Amiga and the standard floppy controller in
-	  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
+	  PCs and workstations. Read <file:Documentation/filesystems/affs.rst>
 	  and <file:fs/affs/Changes>.
 
 	  With this driver you can also mount disk files used by Bernd
diff --git a/fs/afs/Kconfig b/fs/afs/Kconfig
index 3fb1f559e317..1ad211d72b3b 100644
--- a/fs/afs/Kconfig
+++ b/fs/afs/Kconfig
@@ -8,7 +8,7 @@ config AFS_FS
 	  If you say Y here, you will get an experimental Andrew File System
 	  driver. It currently only supports unsecured read-only AFS access.
 
-	  See <file:Documentation/filesystems/afs.txt> for more information.
+	  See <file:Documentation/filesystems/afs.rst> for more information.
 
 	  If unsure, say N.
 
@@ -18,7 +18,7 @@ config AFS_DEBUG
 	help
 	  Say Y here to make runtime controllable debugging messages appear.
 
-	  See <file:Documentation/filesystems/afs.txt> for more information.
+	  See <file:Documentation/filesystems/afs.rst> for more information.
 
 	  If unsure, say N.
 
@@ -37,6 +37,6 @@ config AFS_DEBUG_CURSOR
 	  the dmesg log if the server rotation algorithm fails to successfully
 	  contact a server.
 
-	  See <file:Documentation/filesystems/afs.txt> for more information.
+	  See <file:Documentation/filesystems/afs.rst> for more information.
 
 	  If unsure, say N.
diff --git a/fs/aio.c b/fs/aio.c
index 5f3d3d814928..8a3147a378c8 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -27,7 +27,6 @@
 #include <linux/file.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
-#include <linux/mmu_context.h>
 #include <linux/percpu.h>
 #include <linux/slab.h>
 #include <linux/timer.h>
@@ -68,7 +67,7 @@ struct aio_ring {
 	unsigned	header_length;	/* size of aio_ring */
 
 
-	struct io_event		io_events[0];
+	struct io_event		io_events[];
 }; /* 128 bytes + ring size */
 
 /*
@@ -1287,12 +1286,9 @@ static long read_events(struct kioctx *ctx, long min_nr, long nr,
 	 * the ringbuffer empty. So in practice we should be ok, but it's
 	 * something to be aware of when touching this code.
 	 */
-	if (until == 0)
-		aio_read_events(ctx, min_nr, nr, event, &ret);
-	else
-		wait_event_interruptible_hrtimeout(ctx->wait,
-				aio_read_events(ctx, min_nr, nr, event, &ret),
-				until);
+	wait_event_interruptible_hrtimeout(ctx->wait,
+			aio_read_events(ctx, min_nr, nr, event, &ret),
+			until);
 	return ret;
 }
 
diff --git a/fs/bfs/Kconfig b/fs/bfs/Kconfig
index 3e1247f07913..3a757805b585 100644
--- a/fs/bfs/Kconfig
+++ b/fs/bfs/Kconfig
@@ -11,7 +11,7 @@ config BFS_FS
 	  on your /stand slice from within Linux.  You then also need to say Y
 	  to "UnixWare slices support", below.  More information about the BFS
 	  file system is contained in the file
-	  <file:Documentation/filesystems/bfs.txt>.
+	  <file:Documentation/filesystems/bfs.rst>.
 
 	  If you don't know what this is about, say N.
 
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 13f25e241ac4..5042c03e7b82 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -40,12 +40,18 @@
 #include <linux/sched/coredump.h>
 #include <linux/sched/task_stack.h>
 #include <linux/sched/cputime.h>
+#include <linux/sizes.h>
+#include <linux/types.h>
 #include <linux/cred.h>
 #include <linux/dax.h>
 #include <linux/uaccess.h>
 #include <asm/param.h>
 #include <asm/page.h>
 
+#ifndef ELF_COMPAT
+#define ELF_COMPAT 0
+#endif
+
 #ifndef user_long_t
 #define user_long_t long
 #endif
@@ -347,8 +353,6 @@ create_elf_tables(struct linux_binprm *bprm, const struct elfhdr *exec,
 	return 0;
 }
 
-#ifndef elf_map
-
 static unsigned long elf_map(struct file *filep, unsigned long addr,
 		const struct elf_phdr *eppnt, int prot, int type,
 		unsigned long total_size)
@@ -388,8 +392,6 @@ static unsigned long elf_map(struct file *filep, unsigned long addr,
 	return(map_addr);
 }
 
-#endif /* !elf_map */
-
 static unsigned long total_mapping_size(const struct elf_phdr *cmds, int nr)
 {
 	int i, first_idx = -1, last_idx = -1;
@@ -539,7 +541,8 @@ static inline int arch_check_elf(struct elfhdr *ehdr, bool has_interp,
 
 #endif /* !CONFIG_ARCH_BINFMT_ELF_STATE */
 
-static inline int make_prot(u32 p_flags)
+static inline int make_prot(u32 p_flags, struct arch_elf_state *arch_state,
+			    bool has_interp, bool is_interp)
 {
 	int prot = 0;
 
@@ -549,7 +552,8 @@ static inline int make_prot(u32 p_flags)
 		prot |= PROT_WRITE;
 	if (p_flags & PF_X)
 		prot |= PROT_EXEC;
-	return prot;
+
+	return arch_elf_adjust_prot(prot, arch_state, has_interp, is_interp);
 }
 
 /* This is much more generalized than the library routine read function,
@@ -559,7 +563,8 @@ static inline int make_prot(u32 p_flags)
 
 static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex,
 		struct file *interpreter,
-		unsigned long no_base, struct elf_phdr *interp_elf_phdata)
+		unsigned long no_base, struct elf_phdr *interp_elf_phdata,
+		struct arch_elf_state *arch_state)
 {
 	struct elf_phdr *eppnt;
 	unsigned long load_addr = 0;
@@ -591,7 +596,8 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex,
 	for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) {
 		if (eppnt->p_type == PT_LOAD) {
 			int elf_type = MAP_PRIVATE | MAP_DENYWRITE;
-			int elf_prot = make_prot(eppnt->p_flags);
+			int elf_prot = make_prot(eppnt->p_flags, arch_state,
+						 true, true);
 			unsigned long vaddr = 0;
 			unsigned long k, map_addr;
 
@@ -682,6 +688,111 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex,
  * libraries.  There is no binary dependent code anywhere else.
  */
 
+static int parse_elf_property(const char *data, size_t *off, size_t datasz,
+			      struct arch_elf_state *arch,
+			      bool have_prev_type, u32 *prev_type)
+{
+	size_t o, step;
+	const struct gnu_property *pr;
+	int ret;
+
+	if (*off == datasz)
+		return -ENOENT;
+
+	if (WARN_ON_ONCE(*off > datasz || *off % ELF_GNU_PROPERTY_ALIGN))
+		return -EIO;
+	o = *off;
+	datasz -= *off;
+
+	if (datasz < sizeof(*pr))
+		return -ENOEXEC;
+	pr = (const struct gnu_property *)(data + o);
+	o += sizeof(*pr);
+	datasz -= sizeof(*pr);
+
+	if (pr->pr_datasz > datasz)
+		return -ENOEXEC;
+
+	WARN_ON_ONCE(o % ELF_GNU_PROPERTY_ALIGN);
+	step = round_up(pr->pr_datasz, ELF_GNU_PROPERTY_ALIGN);
+	if (step > datasz)
+		return -ENOEXEC;
+
+	/* Properties are supposed to be unique and sorted on pr_type: */
+	if (have_prev_type && pr->pr_type <= *prev_type)
+		return -ENOEXEC;
+	*prev_type = pr->pr_type;
+
+	ret = arch_parse_elf_property(pr->pr_type, data + o,
+				      pr->pr_datasz, ELF_COMPAT, arch);
+	if (ret)
+		return ret;
+
+	*off = o + step;
+	return 0;
+}
+
+#define NOTE_DATA_SZ SZ_1K
+#define GNU_PROPERTY_TYPE_0_NAME "GNU"
+#define NOTE_NAME_SZ (sizeof(GNU_PROPERTY_TYPE_0_NAME))
+
+static int parse_elf_properties(struct file *f, const struct elf_phdr *phdr,
+				struct arch_elf_state *arch)
+{
+	union {
+		struct elf_note nhdr;
+		char data[NOTE_DATA_SZ];
+	} note;
+	loff_t pos;
+	ssize_t n;
+	size_t off, datasz;
+	int ret;
+	bool have_prev_type;
+	u32 prev_type;
+
+	if (!IS_ENABLED(CONFIG_ARCH_USE_GNU_PROPERTY) || !phdr)
+		return 0;
+
+	/* load_elf_binary() shouldn't call us unless this is true... */
+	if (WARN_ON_ONCE(phdr->p_type != PT_GNU_PROPERTY))
+		return -ENOEXEC;
+
+	/* If the properties are crazy large, that's too bad (for now): */
+	if (phdr->p_filesz > sizeof(note))
+		return -ENOEXEC;
+
+	pos = phdr->p_offset;
+	n = kernel_read(f, &note, phdr->p_filesz, &pos);
+
+	BUILD_BUG_ON(sizeof(note) < sizeof(note.nhdr) + NOTE_NAME_SZ);
+	if (n < 0 || n < sizeof(note.nhdr) + NOTE_NAME_SZ)
+		return -EIO;
+
+	if (note.nhdr.n_type != NT_GNU_PROPERTY_TYPE_0 ||
+	    note.nhdr.n_namesz != NOTE_NAME_SZ ||
+	    strncmp(note.data + sizeof(note.nhdr),
+		    GNU_PROPERTY_TYPE_0_NAME, n - sizeof(note.nhdr)))
+		return -ENOEXEC;
+
+	off = round_up(sizeof(note.nhdr) + NOTE_NAME_SZ,
+		       ELF_GNU_PROPERTY_ALIGN);
+	if (off > n)
+		return -ENOEXEC;
+
+	if (note.nhdr.n_descsz > n - off)
+		return -ENOEXEC;
+	datasz = off + note.nhdr.n_descsz;
+
+	have_prev_type = false;
+	do {
+		ret = parse_elf_property(note.data, &off, datasz, arch,
+					 have_prev_type, &prev_type);
+		have_prev_type = true;
+	} while (!ret);
+
+	return ret == -ENOENT ? 0 : ret;
+}
+
 static int load_elf_binary(struct linux_binprm *bprm)
 {
 	struct file *interpreter = NULL; /* to shut gcc up */
@@ -689,6 +800,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	int load_addr_set = 0;
 	unsigned long error;
 	struct elf_phdr *elf_ppnt, *elf_phdata, *interp_elf_phdata = NULL;
+	struct elf_phdr *elf_property_phdata = NULL;
 	unsigned long elf_bss, elf_brk;
 	int bss_prot = 0;
 	int retval, i;
@@ -726,6 +838,11 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	for (i = 0; i < elf_ex->e_phnum; i++, elf_ppnt++) {
 		char *elf_interpreter;
 
+		if (elf_ppnt->p_type == PT_GNU_PROPERTY) {
+			elf_property_phdata = elf_ppnt;
+			continue;
+		}
+
 		if (elf_ppnt->p_type != PT_INTERP)
 			continue;
 
@@ -819,9 +936,14 @@ static int load_elf_binary(struct linux_binprm *bprm)
 			goto out_free_dentry;
 
 		/* Pass PT_LOPROC..PT_HIPROC headers to arch code */
+		elf_property_phdata = NULL;
 		elf_ppnt = interp_elf_phdata;
 		for (i = 0; i < interp_elf_ex->e_phnum; i++, elf_ppnt++)
 			switch (elf_ppnt->p_type) {
+			case PT_GNU_PROPERTY:
+				elf_property_phdata = elf_ppnt;
+				break;
+
 			case PT_LOPROC ... PT_HIPROC:
 				retval = arch_elf_pt_proc(interp_elf_ex,
 							  elf_ppnt, interpreter,
@@ -832,6 +954,11 @@ static int load_elf_binary(struct linux_binprm *bprm)
 			}
 	}
 
+	retval = parse_elf_properties(interpreter ?: bprm->file,
+				      elf_property_phdata, &arch_state);
+	if (retval)
+		goto out_free_dentry;
+
 	/*
 	 * Allow arch code to reject the ELF at this point, whilst it's
 	 * still possible to return an error to the code that invoked
@@ -913,7 +1040,8 @@ static int load_elf_binary(struct linux_binprm *bprm)
 			}
 		}
 
-		elf_prot = make_prot(elf_ppnt->p_flags);
+		elf_prot = make_prot(elf_ppnt->p_flags, &arch_state,
+				     !!interpreter, false);
 
 		elf_flags = MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE;
 
@@ -1056,7 +1184,8 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	if (interpreter) {
 		elf_entry = load_elf_interp(interp_elf_ex,
 					    interpreter,
-					    load_bias, interp_elf_phdata);
+					    load_bias, interp_elf_phdata,
+					    &arch_state);
 		if (!IS_ERR((void *)elf_entry)) {
 			/*
 			 * load_elf_interp() returns relocation
@@ -1664,7 +1793,7 @@ struct elf_thread_core_info {
 	struct elf_thread_core_info *next;
 	struct task_struct *task;
 	struct elf_prstatus prstatus;
-	struct memelfnote notes[0];
+	struct memelfnote notes[];
 };
 
 struct elf_note_info {
@@ -1733,7 +1862,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
 		    (!regset->active || regset->active(t->task, regset) > 0)) {
 			int ret;
 			size_t size = regset_size(t->task, regset);
-			void *data = kmalloc(size, GFP_KERNEL);
+			void *data = kzalloc(size, GFP_KERNEL);
 			if (unlikely(!data))
 				return 0;
 			ret = regset->get(t->task, regset,
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 93672c3f1c78..4c26dcd9dba3 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -614,10 +614,9 @@ static int blkdev_readpage(struct file * file, struct page * page)
 	return block_read_full_page(page, blkdev_get_block);
 }
 
-static int blkdev_readpages(struct file *file, struct address_space *mapping,
-			struct list_head *pages, unsigned nr_pages)
+static void blkdev_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, blkdev_get_block);
+	mpage_readahead(rac, blkdev_get_block);
 }
 
 static int blkdev_write_begin(struct file *file, struct address_space *mapping,
@@ -713,7 +712,6 @@ int bdev_read_page(struct block_device *bdev, sector_t sector,
 	blk_queue_exit(bdev->bd_queue);
 	return result;
 }
-EXPORT_SYMBOL_GPL(bdev_read_page);
 
 /**
  * bdev_write_page() - Start writing a page to a block device
@@ -758,7 +756,6 @@ int bdev_write_page(struct block_device *bdev, sector_t sector,
 	blk_queue_exit(bdev->bd_queue);
 	return result;
 }
-EXPORT_SYMBOL_GPL(bdev_write_page);
 
 /*
  * pseudo-fs
@@ -882,21 +879,6 @@ static int bdev_set(struct inode *inode, void *data)
 
 static LIST_HEAD(all_bdevs);
 
-/*
- * If there is a bdev inode for this device, unhash it so that it gets evicted
- * as soon as last inode reference is dropped.
- */
-void bdev_unhash_inode(dev_t dev)
-{
-	struct inode *inode;
-
-	inode = ilookup5(blockdev_superblock, hash(dev), bdev_test, &dev);
-	if (inode) {
-		remove_inode_hash(inode);
-		iput(inode);
-	}
-}
-
 struct block_device *bdget(dev_t dev)
 {
 	struct block_device *bdev;
@@ -1516,7 +1498,7 @@ int bdev_disk_changed(struct block_device *bdev, bool invalidate)
 	lockdep_assert_held(&bdev->bd_mutex);
 
 rescan:
-	ret = blk_drop_partitions(disk, bdev);
+	ret = blk_drop_partitions(bdev);
 	if (ret)
 		return ret;
 
@@ -2085,7 +2067,7 @@ static int blkdev_writepages(struct address_space *mapping,
 
 static const struct address_space_operations def_blk_aops = {
 	.readpage	= blkdev_readpage,
-	.readpages	= blkdev_readpages,
+	.readahead	= blkdev_readahead,
 	.writepage	= blkdev_writepage,
 	.write_begin	= blkdev_write_begin,
 	.write_end	= blkdev_write_end,
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 9c380e7edf62..60a69f7c0b36 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -13,6 +13,7 @@
 #include "transaction.h"
 #include "delayed-ref.h"
 #include "locking.h"
+#include "misc.h"
 
 /* Just an arbitrary number so we can be sure this happened */
 #define BACKREF_FOUND_SHARED 6
@@ -2295,3 +2296,836 @@ void free_ipath(struct inode_fs_paths *ipath)
 	kvfree(ipath->fspath);
 	kfree(ipath);
 }
+
+struct btrfs_backref_iter *btrfs_backref_iter_alloc(
+		struct btrfs_fs_info *fs_info, gfp_t gfp_flag)
+{
+	struct btrfs_backref_iter *ret;
+
+	ret = kzalloc(sizeof(*ret), gfp_flag);
+	if (!ret)
+		return NULL;
+
+	ret->path = btrfs_alloc_path();
+	if (!ret) {
+		kfree(ret);
+		return NULL;
+	}
+
+	/* Current backref iterator only supports iteration in commit root */
+	ret->path->search_commit_root = 1;
+	ret->path->skip_locking = 1;
+	ret->fs_info = fs_info;
+
+	return ret;
+}
+
+int btrfs_backref_iter_start(struct btrfs_backref_iter *iter, u64 bytenr)
+{
+	struct btrfs_fs_info *fs_info = iter->fs_info;
+	struct btrfs_path *path = iter->path;
+	struct btrfs_extent_item *ei;
+	struct btrfs_key key;
+	int ret;
+
+	key.objectid = bytenr;
+	key.type = BTRFS_METADATA_ITEM_KEY;
+	key.offset = (u64)-1;
+	iter->bytenr = bytenr;
+
+	ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
+	if (ret < 0)
+		return ret;
+	if (ret == 0) {
+		ret = -EUCLEAN;
+		goto release;
+	}
+	if (path->slots[0] == 0) {
+		WARN_ON(IS_ENABLED(CONFIG_BTRFS_DEBUG));
+		ret = -EUCLEAN;
+		goto release;
+	}
+	path->slots[0]--;
+
+	btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
+	if ((key.type != BTRFS_EXTENT_ITEM_KEY &&
+	     key.type != BTRFS_METADATA_ITEM_KEY) || key.objectid != bytenr) {
+		ret = -ENOENT;
+		goto release;
+	}
+	memcpy(&iter->cur_key, &key, sizeof(key));
+	iter->item_ptr = (u32)btrfs_item_ptr_offset(path->nodes[0],
+						    path->slots[0]);
+	iter->end_ptr = (u32)(iter->item_ptr +
+			btrfs_item_size_nr(path->nodes[0], path->slots[0]));
+	ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
+			    struct btrfs_extent_item);
+
+	/*
+	 * Only support iteration on tree backref yet.
+	 *
+	 * This is an extra precaution for non skinny-metadata, where
+	 * EXTENT_ITEM is also used for tree blocks, that we can only use
+	 * extent flags to determine if it's a tree block.
+	 */
+	if (btrfs_extent_flags(path->nodes[0], ei) & BTRFS_EXTENT_FLAG_DATA) {
+		ret = -ENOTSUPP;
+		goto release;
+	}
+	iter->cur_ptr = (u32)(iter->item_ptr + sizeof(*ei));
+
+	/* If there is no inline backref, go search for keyed backref */
+	if (iter->cur_ptr >= iter->end_ptr) {
+		ret = btrfs_next_item(fs_info->extent_root, path);
+
+		/* No inline nor keyed ref */
+		if (ret > 0) {
+			ret = -ENOENT;
+			goto release;
+		}
+		if (ret < 0)
+			goto release;
+
+		btrfs_item_key_to_cpu(path->nodes[0], &iter->cur_key,
+				path->slots[0]);
+		if (iter->cur_key.objectid != bytenr ||
+		    (iter->cur_key.type != BTRFS_SHARED_BLOCK_REF_KEY &&
+		     iter->cur_key.type != BTRFS_TREE_BLOCK_REF_KEY)) {
+			ret = -ENOENT;
+			goto release;
+		}
+		iter->cur_ptr = (u32)btrfs_item_ptr_offset(path->nodes[0],
+							   path->slots[0]);
+		iter->item_ptr = iter->cur_ptr;
+		iter->end_ptr = (u32)(iter->item_ptr + btrfs_item_size_nr(
+				      path->nodes[0], path->slots[0]));
+	}
+
+	return 0;
+release:
+	btrfs_backref_iter_release(iter);
+	return ret;
+}
+
+/*
+ * Go to the next backref item of current bytenr, can be either inlined or
+ * keyed.
+ *
+ * Caller needs to check whether it's inline ref or not by iter->cur_key.
+ *
+ * Return 0 if we get next backref without problem.
+ * Return >0 if there is no extra backref for this bytenr.
+ * Return <0 if there is something wrong happened.
+ */
+int btrfs_backref_iter_next(struct btrfs_backref_iter *iter)
+{
+	struct extent_buffer *eb = btrfs_backref_get_eb(iter);
+	struct btrfs_path *path = iter->path;
+	struct btrfs_extent_inline_ref *iref;
+	int ret;
+	u32 size;
+
+	if (btrfs_backref_iter_is_inline_ref(iter)) {
+		/* We're still inside the inline refs */
+		ASSERT(iter->cur_ptr < iter->end_ptr);
+
+		if (btrfs_backref_has_tree_block_info(iter)) {
+			/* First tree block info */
+			size = sizeof(struct btrfs_tree_block_info);
+		} else {
+			/* Use inline ref type to determine the size */
+			int type;
+
+			iref = (struct btrfs_extent_inline_ref *)
+				((unsigned long)iter->cur_ptr);
+			type = btrfs_extent_inline_ref_type(eb, iref);
+
+			size = btrfs_extent_inline_ref_size(type);
+		}
+		iter->cur_ptr += size;
+		if (iter->cur_ptr < iter->end_ptr)
+			return 0;
+
+		/* All inline items iterated, fall through */
+	}
+
+	/* We're at keyed items, there is no inline item, go to the next one */
+	ret = btrfs_next_item(iter->fs_info->extent_root, iter->path);
+	if (ret)
+		return ret;
+
+	btrfs_item_key_to_cpu(path->nodes[0], &iter->cur_key, path->slots[0]);
+	if (iter->cur_key.objectid != iter->bytenr ||
+	    (iter->cur_key.type != BTRFS_TREE_BLOCK_REF_KEY &&
+	     iter->cur_key.type != BTRFS_SHARED_BLOCK_REF_KEY))
+		return 1;
+	iter->item_ptr = (u32)btrfs_item_ptr_offset(path->nodes[0],
+					path->slots[0]);
+	iter->cur_ptr = iter->item_ptr;
+	iter->end_ptr = iter->item_ptr + (u32)btrfs_item_size_nr(path->nodes[0],
+						path->slots[0]);
+	return 0;
+}
+
+void btrfs_backref_init_cache(struct btrfs_fs_info *fs_info,
+			      struct btrfs_backref_cache *cache, int is_reloc)
+{
+	int i;
+
+	cache->rb_root = RB_ROOT;
+	for (i = 0; i < BTRFS_MAX_LEVEL; i++)
+		INIT_LIST_HEAD(&cache->pending[i]);
+	INIT_LIST_HEAD(&cache->changed);
+	INIT_LIST_HEAD(&cache->detached);
+	INIT_LIST_HEAD(&cache->leaves);
+	INIT_LIST_HEAD(&cache->pending_edge);
+	INIT_LIST_HEAD(&cache->useless_node);
+	cache->fs_info = fs_info;
+	cache->is_reloc = is_reloc;
+}
+
+struct btrfs_backref_node *btrfs_backref_alloc_node(
+		struct btrfs_backref_cache *cache, u64 bytenr, int level)
+{
+	struct btrfs_backref_node *node;
+
+	ASSERT(level >= 0 && level < BTRFS_MAX_LEVEL);
+	node = kzalloc(sizeof(*node), GFP_NOFS);
+	if (!node)
+		return node;
+
+	INIT_LIST_HEAD(&node->list);
+	INIT_LIST_HEAD(&node->upper);
+	INIT_LIST_HEAD(&node->lower);
+	RB_CLEAR_NODE(&node->rb_node);
+	cache->nr_nodes++;
+	node->level = level;
+	node->bytenr = bytenr;
+
+	return node;
+}
+
+struct btrfs_backref_edge *btrfs_backref_alloc_edge(
+		struct btrfs_backref_cache *cache)
+{
+	struct btrfs_backref_edge *edge;
+
+	edge = kzalloc(sizeof(*edge), GFP_NOFS);
+	if (edge)
+		cache->nr_edges++;
+	return edge;
+}
+
+/*
+ * Drop the backref node from cache, also cleaning up all its
+ * upper edges and any uncached nodes in the path.
+ *
+ * This cleanup happens bottom up, thus the node should either
+ * be the lowest node in the cache or a detached node.
+ */
+void btrfs_backref_cleanup_node(struct btrfs_backref_cache *cache,
+				struct btrfs_backref_node *node)
+{
+	struct btrfs_backref_node *upper;
+	struct btrfs_backref_edge *edge;
+
+	if (!node)
+		return;
+
+	BUG_ON(!node->lowest && !node->detached);
+	while (!list_empty(&node->upper)) {
+		edge = list_entry(node->upper.next, struct btrfs_backref_edge,
+				  list[LOWER]);
+		upper = edge->node[UPPER];
+		list_del(&edge->list[LOWER]);
+		list_del(&edge->list[UPPER]);
+		btrfs_backref_free_edge(cache, edge);
+
+		if (RB_EMPTY_NODE(&upper->rb_node)) {
+			BUG_ON(!list_empty(&node->upper));
+			btrfs_backref_drop_node(cache, node);
+			node = upper;
+			node->lowest = 1;
+			continue;
+		}
+		/*
+		 * Add the node to leaf node list if no other child block
+		 * cached.
+		 */
+		if (list_empty(&upper->lower)) {
+			list_add_tail(&upper->lower, &cache->leaves);
+			upper->lowest = 1;
+		}
+	}
+
+	btrfs_backref_drop_node(cache, node);
+}
+
+/*
+ * Release all nodes/edges from current cache
+ */
+void btrfs_backref_release_cache(struct btrfs_backref_cache *cache)
+{
+	struct btrfs_backref_node *node;
+	int i;
+
+	while (!list_empty(&cache->detached)) {
+		node = list_entry(cache->detached.next,
+				  struct btrfs_backref_node, list);
+		btrfs_backref_cleanup_node(cache, node);
+	}
+
+	while (!list_empty(&cache->leaves)) {
+		node = list_entry(cache->leaves.next,
+				  struct btrfs_backref_node, lower);
+		btrfs_backref_cleanup_node(cache, node);
+	}
+
+	cache->last_trans = 0;
+
+	for (i = 0; i < BTRFS_MAX_LEVEL; i++)
+		ASSERT(list_empty(&cache->pending[i]));
+	ASSERT(list_empty(&cache->pending_edge));
+	ASSERT(list_empty(&cache->useless_node));
+	ASSERT(list_empty(&cache->changed));
+	ASSERT(list_empty(&cache->detached));
+	ASSERT(RB_EMPTY_ROOT(&cache->rb_root));
+	ASSERT(!cache->nr_nodes);
+	ASSERT(!cache->nr_edges);
+}
+
+/*
+ * Handle direct tree backref
+ *
+ * Direct tree backref means, the backref item shows its parent bytenr
+ * directly. This is for SHARED_BLOCK_REF backref (keyed or inlined).
+ *
+ * @ref_key:	The converted backref key.
+ *		For keyed backref, it's the item key.
+ *		For inlined backref, objectid is the bytenr,
+ *		type is btrfs_inline_ref_type, offset is
+ *		btrfs_inline_ref_offset.
+ */
+static int handle_direct_tree_backref(struct btrfs_backref_cache *cache,
+				      struct btrfs_key *ref_key,
+				      struct btrfs_backref_node *cur)
+{
+	struct btrfs_backref_edge *edge;
+	struct btrfs_backref_node *upper;
+	struct rb_node *rb_node;
+
+	ASSERT(ref_key->type == BTRFS_SHARED_BLOCK_REF_KEY);
+
+	/* Only reloc root uses backref pointing to itself */
+	if (ref_key->objectid == ref_key->offset) {
+		struct btrfs_root *root;
+
+		cur->is_reloc_root = 1;
+		/* Only reloc backref cache cares about a specific root */
+		if (cache->is_reloc) {
+			root = find_reloc_root(cache->fs_info, cur->bytenr);
+			if (WARN_ON(!root))
+				return -ENOENT;
+			cur->root = root;
+		} else {
+			/*
+			 * For generic purpose backref cache, reloc root node
+			 * is useless.
+			 */
+			list_add(&cur->list, &cache->useless_node);
+		}
+		return 0;
+	}
+
+	edge = btrfs_backref_alloc_edge(cache);
+	if (!edge)
+		return -ENOMEM;
+
+	rb_node = rb_simple_search(&cache->rb_root, ref_key->offset);
+	if (!rb_node) {
+		/* Parent node not yet cached */
+		upper = btrfs_backref_alloc_node(cache, ref_key->offset,
+					   cur->level + 1);
+		if (!upper) {
+			btrfs_backref_free_edge(cache, edge);
+			return -ENOMEM;
+		}
+
+		/*
+		 *  Backrefs for the upper level block isn't cached, add the
+		 *  block to pending list
+		 */
+		list_add_tail(&edge->list[UPPER], &cache->pending_edge);
+	} else {
+		/* Parent node already cached */
+		upper = rb_entry(rb_node, struct btrfs_backref_node, rb_node);
+		ASSERT(upper->checked);
+		INIT_LIST_HEAD(&edge->list[UPPER]);
+	}
+	btrfs_backref_link_edge(edge, cur, upper, LINK_LOWER);
+	return 0;
+}
+
+/*
+ * Handle indirect tree backref
+ *
+ * Indirect tree backref means, we only know which tree the node belongs to.
+ * We still need to do a tree search to find out the parents. This is for
+ * TREE_BLOCK_REF backref (keyed or inlined).
+ *
+ * @ref_key:	The same as @ref_key in  handle_direct_tree_backref()
+ * @tree_key:	The first key of this tree block.
+ * @path:	A clean (released) path, to avoid allocating path everytime
+ *		the function get called.
+ */
+static int handle_indirect_tree_backref(struct btrfs_backref_cache *cache,
+					struct btrfs_path *path,
+					struct btrfs_key *ref_key,
+					struct btrfs_key *tree_key,
+					struct btrfs_backref_node *cur)
+{
+	struct btrfs_fs_info *fs_info = cache->fs_info;
+	struct btrfs_backref_node *upper;
+	struct btrfs_backref_node *lower;
+	struct btrfs_backref_edge *edge;
+	struct extent_buffer *eb;
+	struct btrfs_root *root;
+	struct btrfs_key root_key;
+	struct rb_node *rb_node;
+	int level;
+	bool need_check = true;
+	int ret;
+
+	root_key.objectid = ref_key->offset;
+	root_key.type = BTRFS_ROOT_ITEM_KEY;
+	root_key.offset = (u64)-1;
+	root = btrfs_get_fs_root(fs_info, &root_key, false);
+	if (IS_ERR(root))
+		return PTR_ERR(root);
+	if (!test_bit(BTRFS_ROOT_REF_COWS, &root->state))
+		cur->cowonly = 1;
+
+	if (btrfs_root_level(&root->root_item) == cur->level) {
+		/* Tree root */
+		ASSERT(btrfs_root_bytenr(&root->root_item) == cur->bytenr);
+		/*
+		 * For reloc backref cache, we may ignore reloc root.  But for
+		 * general purpose backref cache, we can't rely on
+		 * btrfs_should_ignore_reloc_root() as it may conflict with
+		 * current running relocation and lead to missing root.
+		 *
+		 * For general purpose backref cache, reloc root detection is
+		 * completely relying on direct backref (key->offset is parent
+		 * bytenr), thus only do such check for reloc cache.
+		 */
+		if (btrfs_should_ignore_reloc_root(root) && cache->is_reloc) {
+			btrfs_put_root(root);
+			list_add(&cur->list, &cache->useless_node);
+		} else {
+			cur->root = root;
+		}
+		return 0;
+	}
+
+	level = cur->level + 1;
+
+	/* Search the tree to find parent blocks referring to the block */
+	path->search_commit_root = 1;
+	path->skip_locking = 1;
+	path->lowest_level = level;
+	ret = btrfs_search_slot(NULL, root, tree_key, path, 0, 0);
+	path->lowest_level = 0;
+	if (ret < 0) {
+		btrfs_put_root(root);
+		return ret;
+	}
+	if (ret > 0 && path->slots[level] > 0)
+		path->slots[level]--;
+
+	eb = path->nodes[level];
+	if (btrfs_node_blockptr(eb, path->slots[level]) != cur->bytenr) {
+		btrfs_err(fs_info,
+"couldn't find block (%llu) (level %d) in tree (%llu) with key (%llu %u %llu)",
+			  cur->bytenr, level - 1, root->root_key.objectid,
+			  tree_key->objectid, tree_key->type, tree_key->offset);
+		btrfs_put_root(root);
+		ret = -ENOENT;
+		goto out;
+	}
+	lower = cur;
+
+	/* Add all nodes and edges in the path */
+	for (; level < BTRFS_MAX_LEVEL; level++) {
+		if (!path->nodes[level]) {
+			ASSERT(btrfs_root_bytenr(&root->root_item) ==
+			       lower->bytenr);
+			/* Same as previous should_ignore_reloc_root() call */
+			if (btrfs_should_ignore_reloc_root(root) &&
+			    cache->is_reloc) {
+				btrfs_put_root(root);
+				list_add(&lower->list, &cache->useless_node);
+			} else {
+				lower->root = root;
+			}
+			break;
+		}
+
+		edge = btrfs_backref_alloc_edge(cache);
+		if (!edge) {
+			btrfs_put_root(root);
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		eb = path->nodes[level];
+		rb_node = rb_simple_search(&cache->rb_root, eb->start);
+		if (!rb_node) {
+			upper = btrfs_backref_alloc_node(cache, eb->start,
+							 lower->level + 1);
+			if (!upper) {
+				btrfs_put_root(root);
+				btrfs_backref_free_edge(cache, edge);
+				ret = -ENOMEM;
+				goto out;
+			}
+			upper->owner = btrfs_header_owner(eb);
+			if (!test_bit(BTRFS_ROOT_REF_COWS, &root->state))
+				upper->cowonly = 1;
+
+			/*
+			 * If we know the block isn't shared we can avoid
+			 * checking its backrefs.
+			 */
+			if (btrfs_block_can_be_shared(root, eb))
+				upper->checked = 0;
+			else
+				upper->checked = 1;
+
+			/*
+			 * Add the block to pending list if we need to check its
+			 * backrefs, we only do this once while walking up a
+			 * tree as we will catch anything else later on.
+			 */
+			if (!upper->checked && need_check) {
+				need_check = false;
+				list_add_tail(&edge->list[UPPER],
+					      &cache->pending_edge);
+			} else {
+				if (upper->checked)
+					need_check = true;
+				INIT_LIST_HEAD(&edge->list[UPPER]);
+			}
+		} else {
+			upper = rb_entry(rb_node, struct btrfs_backref_node,
+					 rb_node);
+			ASSERT(upper->checked);
+			INIT_LIST_HEAD(&edge->list[UPPER]);
+			if (!upper->owner)
+				upper->owner = btrfs_header_owner(eb);
+		}
+		btrfs_backref_link_edge(edge, lower, upper, LINK_LOWER);
+
+		if (rb_node) {
+			btrfs_put_root(root);
+			break;
+		}
+		lower = upper;
+		upper = NULL;
+	}
+out:
+	btrfs_release_path(path);
+	return ret;
+}
+
+/*
+ * Add backref node @cur into @cache.
+ *
+ * NOTE: Even if the function returned 0, @cur is not yet cached as its upper
+ *	 links aren't yet bi-directional. Needs to finish such links.
+ *	 Use btrfs_backref_finish_upper_links() to finish such linkage.
+ *
+ * @path:	Released path for indirect tree backref lookup
+ * @iter:	Released backref iter for extent tree search
+ * @node_key:	The first key of the tree block
+ */
+int btrfs_backref_add_tree_node(struct btrfs_backref_cache *cache,
+				struct btrfs_path *path,
+				struct btrfs_backref_iter *iter,
+				struct btrfs_key *node_key,
+				struct btrfs_backref_node *cur)
+{
+	struct btrfs_fs_info *fs_info = cache->fs_info;
+	struct btrfs_backref_edge *edge;
+	struct btrfs_backref_node *exist;
+	int ret;
+
+	ret = btrfs_backref_iter_start(iter, cur->bytenr);
+	if (ret < 0)
+		return ret;
+	/*
+	 * We skip the first btrfs_tree_block_info, as we don't use the key
+	 * stored in it, but fetch it from the tree block
+	 */
+	if (btrfs_backref_has_tree_block_info(iter)) {
+		ret = btrfs_backref_iter_next(iter);
+		if (ret < 0)
+			goto out;
+		/* No extra backref? This means the tree block is corrupted */
+		if (ret > 0) {
+			ret = -EUCLEAN;
+			goto out;
+		}
+	}
+	WARN_ON(cur->checked);
+	if (!list_empty(&cur->upper)) {
+		/*
+		 * The backref was added previously when processing backref of
+		 * type BTRFS_TREE_BLOCK_REF_KEY
+		 */
+		ASSERT(list_is_singular(&cur->upper));
+		edge = list_entry(cur->upper.next, struct btrfs_backref_edge,
+				  list[LOWER]);
+		ASSERT(list_empty(&edge->list[UPPER]));
+		exist = edge->node[UPPER];
+		/*
+		 * Add the upper level block to pending list if we need check
+		 * its backrefs
+		 */
+		if (!exist->checked)
+			list_add_tail(&edge->list[UPPER], &cache->pending_edge);
+	} else {
+		exist = NULL;
+	}
+
+	for (; ret == 0; ret = btrfs_backref_iter_next(iter)) {
+		struct extent_buffer *eb;
+		struct btrfs_key key;
+		int type;
+
+		cond_resched();
+		eb = btrfs_backref_get_eb(iter);
+
+		key.objectid = iter->bytenr;
+		if (btrfs_backref_iter_is_inline_ref(iter)) {
+			struct btrfs_extent_inline_ref *iref;
+
+			/* Update key for inline backref */
+			iref = (struct btrfs_extent_inline_ref *)
+				((unsigned long)iter->cur_ptr);
+			type = btrfs_get_extent_inline_ref_type(eb, iref,
+							BTRFS_REF_TYPE_BLOCK);
+			if (type == BTRFS_REF_TYPE_INVALID) {
+				ret = -EUCLEAN;
+				goto out;
+			}
+			key.type = type;
+			key.offset = btrfs_extent_inline_ref_offset(eb, iref);
+		} else {
+			key.type = iter->cur_key.type;
+			key.offset = iter->cur_key.offset;
+		}
+
+		/*
+		 * Parent node found and matches current inline ref, no need to
+		 * rebuild this node for this inline ref
+		 */
+		if (exist &&
+		    ((key.type == BTRFS_TREE_BLOCK_REF_KEY &&
+		      exist->owner == key.offset) ||
+		     (key.type == BTRFS_SHARED_BLOCK_REF_KEY &&
+		      exist->bytenr == key.offset))) {
+			exist = NULL;
+			continue;
+		}
+
+		/* SHARED_BLOCK_REF means key.offset is the parent bytenr */
+		if (key.type == BTRFS_SHARED_BLOCK_REF_KEY) {
+			ret = handle_direct_tree_backref(cache, &key, cur);
+			if (ret < 0)
+				goto out;
+			continue;
+		} else if (unlikely(key.type == BTRFS_EXTENT_REF_V0_KEY)) {
+			ret = -EINVAL;
+			btrfs_print_v0_err(fs_info);
+			btrfs_handle_fs_error(fs_info, ret, NULL);
+			goto out;
+		} else if (key.type != BTRFS_TREE_BLOCK_REF_KEY) {
+			continue;
+		}
+
+		/*
+		 * key.type == BTRFS_TREE_BLOCK_REF_KEY, inline ref offset
+		 * means the root objectid. We need to search the tree to get
+		 * its parent bytenr.
+		 */
+		ret = handle_indirect_tree_backref(cache, path, &key, node_key,
+						   cur);
+		if (ret < 0)
+			goto out;
+	}
+	ret = 0;
+	cur->checked = 1;
+	WARN_ON(exist);
+out:
+	btrfs_backref_iter_release(iter);
+	return ret;
+}
+
+/*
+ * Finish the upwards linkage created by btrfs_backref_add_tree_node()
+ */
+int btrfs_backref_finish_upper_links(struct btrfs_backref_cache *cache,
+				     struct btrfs_backref_node *start)
+{
+	struct list_head *useless_node = &cache->useless_node;
+	struct btrfs_backref_edge *edge;
+	struct rb_node *rb_node;
+	LIST_HEAD(pending_edge);
+
+	ASSERT(start->checked);
+
+	/* Insert this node to cache if it's not COW-only */
+	if (!start->cowonly) {
+		rb_node = rb_simple_insert(&cache->rb_root, start->bytenr,
+					   &start->rb_node);
+		if (rb_node)
+			btrfs_backref_panic(cache->fs_info, start->bytenr,
+					    -EEXIST);
+		list_add_tail(&start->lower, &cache->leaves);
+	}
+
+	/*
+	 * Use breadth first search to iterate all related edges.
+	 *
+	 * The starting points are all the edges of this node
+	 */
+	list_for_each_entry(edge, &start->upper, list[LOWER])
+		list_add_tail(&edge->list[UPPER], &pending_edge);
+
+	while (!list_empty(&pending_edge)) {
+		struct btrfs_backref_node *upper;
+		struct btrfs_backref_node *lower;
+		struct rb_node *rb_node;
+
+		edge = list_first_entry(&pending_edge,
+				struct btrfs_backref_edge, list[UPPER]);
+		list_del_init(&edge->list[UPPER]);
+		upper = edge->node[UPPER];
+		lower = edge->node[LOWER];
+
+		/* Parent is detached, no need to keep any edges */
+		if (upper->detached) {
+			list_del(&edge->list[LOWER]);
+			btrfs_backref_free_edge(cache, edge);
+
+			/* Lower node is orphan, queue for cleanup */
+			if (list_empty(&lower->upper))
+				list_add(&lower->list, useless_node);
+			continue;
+		}
+
+		/*
+		 * All new nodes added in current build_backref_tree() haven't
+		 * been linked to the cache rb tree.
+		 * So if we have upper->rb_node populated, this means a cache
+		 * hit. We only need to link the edge, as @upper and all its
+		 * parents have already been linked.
+		 */
+		if (!RB_EMPTY_NODE(&upper->rb_node)) {
+			if (upper->lowest) {
+				list_del_init(&upper->lower);
+				upper->lowest = 0;
+			}
+
+			list_add_tail(&edge->list[UPPER], &upper->lower);
+			continue;
+		}
+
+		/* Sanity check, we shouldn't have any unchecked nodes */
+		if (!upper->checked) {
+			ASSERT(0);
+			return -EUCLEAN;
+		}
+
+		/* Sanity check, COW-only node has non-COW-only parent */
+		if (start->cowonly != upper->cowonly) {
+			ASSERT(0);
+			return -EUCLEAN;
+		}
+
+		/* Only cache non-COW-only (subvolume trees) tree blocks */
+		if (!upper->cowonly) {
+			rb_node = rb_simple_insert(&cache->rb_root, upper->bytenr,
+						   &upper->rb_node);
+			if (rb_node) {
+				btrfs_backref_panic(cache->fs_info,
+						upper->bytenr, -EEXIST);
+				return -EUCLEAN;
+			}
+		}
+
+		list_add_tail(&edge->list[UPPER], &upper->lower);
+
+		/*
+		 * Also queue all the parent edges of this uncached node
+		 * to finish the upper linkage
+		 */
+		list_for_each_entry(edge, &upper->upper, list[LOWER])
+			list_add_tail(&edge->list[UPPER], &pending_edge);
+	}
+	return 0;
+}
+
+void btrfs_backref_error_cleanup(struct btrfs_backref_cache *cache,
+				 struct btrfs_backref_node *node)
+{
+	struct btrfs_backref_node *lower;
+	struct btrfs_backref_node *upper;
+	struct btrfs_backref_edge *edge;
+
+	while (!list_empty(&cache->useless_node)) {
+		lower = list_first_entry(&cache->useless_node,
+				   struct btrfs_backref_node, list);
+		list_del_init(&lower->list);
+	}
+	while (!list_empty(&cache->pending_edge)) {
+		edge = list_first_entry(&cache->pending_edge,
+				struct btrfs_backref_edge, list[UPPER]);
+		list_del(&edge->list[UPPER]);
+		list_del(&edge->list[LOWER]);
+		lower = edge->node[LOWER];
+		upper = edge->node[UPPER];
+		btrfs_backref_free_edge(cache, edge);
+
+		/*
+		 * Lower is no longer linked to any upper backref nodes and
+		 * isn't in the cache, we can free it ourselves.
+		 */
+		if (list_empty(&lower->upper) &&
+		    RB_EMPTY_NODE(&lower->rb_node))
+			list_add(&lower->list, &cache->useless_node);
+
+		if (!RB_EMPTY_NODE(&upper->rb_node))
+			continue;
+
+		/* Add this guy's upper edges to the list to process */
+		list_for_each_entry(edge, &upper->upper, list[LOWER])
+			list_add_tail(&edge->list[UPPER],
+				      &cache->pending_edge);
+		if (list_empty(&upper->upper))
+			list_add(&upper->list, &cache->useless_node);
+	}
+
+	while (!list_empty(&cache->useless_node)) {
+		lower = list_first_entry(&cache->useless_node,
+				   struct btrfs_backref_node, list);
+		list_del_init(&lower->list);
+		if (lower == node)
+			node = NULL;
+		btrfs_backref_free_node(cache, lower);
+	}
+
+	btrfs_backref_cleanup_node(cache, node);
+	ASSERT(list_empty(&cache->useless_node) &&
+	       list_empty(&cache->pending_edge));
+}
diff --git a/fs/btrfs/backref.h b/fs/btrfs/backref.h
index 723d6da99114..18393cc05ca2 100644
--- a/fs/btrfs/backref.h
+++ b/fs/btrfs/backref.h
@@ -8,6 +8,7 @@
 
 #include <linux/btrfs.h>
 #include "ulist.h"
+#include "disk-io.h"
 #include "extent_io.h"
 
 struct inode_fs_paths {
@@ -78,4 +79,300 @@ struct prelim_ref {
 	u64 wanted_disk_byte;
 };
 
+/*
+ * Iterate backrefs of one extent.
+ *
+ * Now it only supports iteration of tree block in commit root.
+ */
+struct btrfs_backref_iter {
+	u64 bytenr;
+	struct btrfs_path *path;
+	struct btrfs_fs_info *fs_info;
+	struct btrfs_key cur_key;
+	u32 item_ptr;
+	u32 cur_ptr;
+	u32 end_ptr;
+};
+
+struct btrfs_backref_iter *btrfs_backref_iter_alloc(
+		struct btrfs_fs_info *fs_info, gfp_t gfp_flag);
+
+static inline void btrfs_backref_iter_free(struct btrfs_backref_iter *iter)
+{
+	if (!iter)
+		return;
+	btrfs_free_path(iter->path);
+	kfree(iter);
+}
+
+static inline struct extent_buffer *btrfs_backref_get_eb(
+		struct btrfs_backref_iter *iter)
+{
+	if (!iter)
+		return NULL;
+	return iter->path->nodes[0];
+}
+
+/*
+ * For metadata with EXTENT_ITEM key (non-skinny) case, the first inline data
+ * is btrfs_tree_block_info, without a btrfs_extent_inline_ref header.
+ *
+ * This helper determines if that's the case.
+ */
+static inline bool btrfs_backref_has_tree_block_info(
+		struct btrfs_backref_iter *iter)
+{
+	if (iter->cur_key.type == BTRFS_EXTENT_ITEM_KEY &&
+	    iter->cur_ptr - iter->item_ptr == sizeof(struct btrfs_extent_item))
+		return true;
+	return false;
+}
+
+int btrfs_backref_iter_start(struct btrfs_backref_iter *iter, u64 bytenr);
+
+int btrfs_backref_iter_next(struct btrfs_backref_iter *iter);
+
+static inline bool btrfs_backref_iter_is_inline_ref(
+		struct btrfs_backref_iter *iter)
+{
+	if (iter->cur_key.type == BTRFS_EXTENT_ITEM_KEY ||
+	    iter->cur_key.type == BTRFS_METADATA_ITEM_KEY)
+		return true;
+	return false;
+}
+
+static inline void btrfs_backref_iter_release(struct btrfs_backref_iter *iter)
+{
+	iter->bytenr = 0;
+	iter->item_ptr = 0;
+	iter->cur_ptr = 0;
+	iter->end_ptr = 0;
+	btrfs_release_path(iter->path);
+	memset(&iter->cur_key, 0, sizeof(iter->cur_key));
+}
+
+/*
+ * Backref cache related structures
+ *
+ * The whole objective of backref_cache is to build a bi-directional map
+ * of tree blocks (represented by backref_node) and all their parents.
+ */
+
+/*
+ * Represent a tree block in the backref cache
+ */
+struct btrfs_backref_node {
+	struct {
+		struct rb_node rb_node;
+		u64 bytenr;
+	}; /* Use rb_simple_node for search/insert */
+
+	u64 new_bytenr;
+	/* Objectid of tree block owner, can be not uptodate */
+	u64 owner;
+	/* Link to pending, changed or detached list */
+	struct list_head list;
+
+	/* List of upper level edges, which link this node to its parents */
+	struct list_head upper;
+	/* List of lower level edges, which link this node to its children */
+	struct list_head lower;
+
+	/* NULL if this node is not tree root */
+	struct btrfs_root *root;
+	/* Extent buffer got by COWing the block */
+	struct extent_buffer *eb;
+	/* Level of the tree block */
+	unsigned int level:8;
+	/* Is the block in non-reference counted tree */
+	unsigned int cowonly:1;
+	/* 1 if no child node is in the cache */
+	unsigned int lowest:1;
+	/* Is the extent buffer locked */
+	unsigned int locked:1;
+	/* Has the block been processed */
+	unsigned int processed:1;
+	/* Have backrefs of this block been checked */
+	unsigned int checked:1;
+	/*
+	 * 1 if corresponding block has been COWed but some upper level block
+	 * pointers may not point to the new location
+	 */
+	unsigned int pending:1;
+	/* 1 if the backref node isn't connected to any other backref node */
+	unsigned int detached:1;
+
+	/*
+	 * For generic purpose backref cache, where we only care if it's a reloc
+	 * root, doesn't care the source subvolid.
+	 */
+	unsigned int is_reloc_root:1;
+};
+
+#define LOWER	0
+#define UPPER	1
+
+/*
+ * Represent an edge connecting upper and lower backref nodes.
+ */
+struct btrfs_backref_edge {
+	/*
+	 * list[LOWER] is linked to btrfs_backref_node::upper of lower level
+	 * node, and list[UPPER] is linked to btrfs_backref_node::lower of
+	 * upper level node.
+	 *
+	 * Also, build_backref_tree() uses list[UPPER] for pending edges, before
+	 * linking list[UPPER] to its upper level nodes.
+	 */
+	struct list_head list[2];
+
+	/* Two related nodes */
+	struct btrfs_backref_node *node[2];
+};
+
+struct btrfs_backref_cache {
+	/* Red black tree of all backref nodes in the cache */
+	struct rb_root rb_root;
+	/* For passing backref nodes to btrfs_reloc_cow_block */
+	struct btrfs_backref_node *path[BTRFS_MAX_LEVEL];
+	/*
+	 * List of blocks that have been COWed but some block pointers in upper
+	 * level blocks may not reflect the new location
+	 */
+	struct list_head pending[BTRFS_MAX_LEVEL];
+	/* List of backref nodes with no child node */
+	struct list_head leaves;
+	/* List of blocks that have been COWed in current transaction */
+	struct list_head changed;
+	/* List of detached backref node. */
+	struct list_head detached;
+
+	u64 last_trans;
+
+	int nr_nodes;
+	int nr_edges;
+
+	/* List of unchecked backref edges during backref cache build */
+	struct list_head pending_edge;
+
+	/* List of useless backref nodes during backref cache build */
+	struct list_head useless_node;
+
+	struct btrfs_fs_info *fs_info;
+
+	/*
+	 * Whether this cache is for relocation
+	 *
+	 * Reloction backref cache require more info for reloc root compared
+	 * to generic backref cache.
+	 */
+	unsigned int is_reloc;
+};
+
+void btrfs_backref_init_cache(struct btrfs_fs_info *fs_info,
+			      struct btrfs_backref_cache *cache, int is_reloc);
+struct btrfs_backref_node *btrfs_backref_alloc_node(
+		struct btrfs_backref_cache *cache, u64 bytenr, int level);
+struct btrfs_backref_edge *btrfs_backref_alloc_edge(
+		struct btrfs_backref_cache *cache);
+
+#define		LINK_LOWER	(1 << 0)
+#define		LINK_UPPER	(1 << 1)
+static inline void btrfs_backref_link_edge(struct btrfs_backref_edge *edge,
+					   struct btrfs_backref_node *lower,
+					   struct btrfs_backref_node *upper,
+					   int link_which)
+{
+	ASSERT(upper && lower && upper->level == lower->level + 1);
+	edge->node[LOWER] = lower;
+	edge->node[UPPER] = upper;
+	if (link_which & LINK_LOWER)
+		list_add_tail(&edge->list[LOWER], &lower->upper);
+	if (link_which & LINK_UPPER)
+		list_add_tail(&edge->list[UPPER], &upper->lower);
+}
+
+static inline void btrfs_backref_free_node(struct btrfs_backref_cache *cache,
+					   struct btrfs_backref_node *node)
+{
+	if (node) {
+		cache->nr_nodes--;
+		btrfs_put_root(node->root);
+		kfree(node);
+	}
+}
+
+static inline void btrfs_backref_free_edge(struct btrfs_backref_cache *cache,
+					   struct btrfs_backref_edge *edge)
+{
+	if (edge) {
+		cache->nr_edges--;
+		kfree(edge);
+	}
+}
+
+static inline void btrfs_backref_unlock_node_buffer(
+		struct btrfs_backref_node *node)
+{
+	if (node->locked) {
+		btrfs_tree_unlock(node->eb);
+		node->locked = 0;
+	}
+}
+
+static inline void btrfs_backref_drop_node_buffer(
+		struct btrfs_backref_node *node)
+{
+	if (node->eb) {
+		btrfs_backref_unlock_node_buffer(node);
+		free_extent_buffer(node->eb);
+		node->eb = NULL;
+	}
+}
+
+/*
+ * Drop the backref node from cache without cleaning up its children
+ * edges.
+ *
+ * This can only be called on node without parent edges.
+ * The children edges are still kept as is.
+ */
+static inline void btrfs_backref_drop_node(struct btrfs_backref_cache *tree,
+					   struct btrfs_backref_node *node)
+{
+	BUG_ON(!list_empty(&node->upper));
+
+	btrfs_backref_drop_node_buffer(node);
+	list_del(&node->list);
+	list_del(&node->lower);
+	if (!RB_EMPTY_NODE(&node->rb_node))
+		rb_erase(&node->rb_node, &tree->rb_root);
+	btrfs_backref_free_node(tree, node);
+}
+
+void btrfs_backref_cleanup_node(struct btrfs_backref_cache *cache,
+				struct btrfs_backref_node *node);
+
+void btrfs_backref_release_cache(struct btrfs_backref_cache *cache);
+
+static inline void btrfs_backref_panic(struct btrfs_fs_info *fs_info,
+				       u64 bytenr, int errno)
+{
+	btrfs_panic(fs_info, errno,
+		    "Inconsistency in backref cache found at offset %llu",
+		    bytenr);
+}
+
+int btrfs_backref_add_tree_node(struct btrfs_backref_cache *cache,
+				struct btrfs_path *path,
+				struct btrfs_backref_iter *iter,
+				struct btrfs_key *node_key,
+				struct btrfs_backref_node *cur);
+
+int btrfs_backref_finish_upper_links(struct btrfs_backref_cache *cache,
+				     struct btrfs_backref_node *start);
+
+void btrfs_backref_error_cleanup(struct btrfs_backref_cache *cache,
+				 struct btrfs_backref_node *node);
+
 #endif
diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c
index 47f66c6a7d7f..5627f53ca115 100644
--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -916,7 +916,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 	path = btrfs_alloc_path();
 	if (!path) {
 		ret = -ENOMEM;
-		goto out;
+		goto out_put_group;
 	}
 
 	/*
@@ -954,7 +954,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 		ret = btrfs_orphan_add(trans, BTRFS_I(inode));
 		if (ret) {
 			btrfs_add_delayed_iput(inode);
-			goto out;
+			goto out_put_group;
 		}
 		clear_nlink(inode);
 		/* One for the block groups ref */
@@ -977,13 +977,13 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 
 	ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1);
 	if (ret < 0)
-		goto out;
+		goto out_put_group;
 	if (ret > 0)
 		btrfs_release_path(path);
 	if (ret == 0) {
 		ret = btrfs_del_item(trans, tree_root, path);
 		if (ret)
-			goto out;
+			goto out_put_group;
 		btrfs_release_path(path);
 	}
 
@@ -1102,9 +1102,9 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 
 	ret = remove_block_group_free_space(trans, block_group);
 	if (ret)
-		goto out;
+		goto out_put_group;
 
-	btrfs_put_block_group(block_group);
+	/* Once for the block groups rbtree */
 	btrfs_put_block_group(block_group);
 
 	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
@@ -1127,6 +1127,10 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 		/* once for the tree */
 		free_extent_map(em);
 	}
+
+out_put_group:
+	/* Once for the lookup reference */
+	btrfs_put_block_group(block_group);
 out:
 	if (remove_rsv)
 		btrfs_delayed_refs_rsv_release(fs_info, 1);
@@ -1171,7 +1175,7 @@ struct btrfs_trans_handle *btrfs_start_trans_remove_block_group(
 	free_extent_map(em);
 
 	return btrfs_start_transaction_fallback_global_rsv(fs_info->extent_root,
-							   num_items, 1);
+							   num_items);
 }
 
 /*
@@ -1280,21 +1284,17 @@ static bool clean_pinned_extents(struct btrfs_trans_handle *trans,
 		ret = clear_extent_bits(&prev_trans->pinned_extents, start, end,
 					EXTENT_DIRTY);
 		if (ret)
-			goto err;
+			goto out;
 	}
 
 	ret = clear_extent_bits(&trans->transaction->pinned_extents, start, end,
 				EXTENT_DIRTY);
-	if (ret)
-		goto err;
+out:
 	mutex_unlock(&fs_info->unused_bg_unpin_mutex);
+	if (prev_trans)
+		btrfs_put_transaction(prev_trans);
 
-	return true;
-
-err:
-	mutex_unlock(&fs_info->unused_bg_unpin_mutex);
-	btrfs_dec_block_group_ro(bg);
-	return false;
+	return ret == 0;
 }
 
 /*
@@ -1392,8 +1392,10 @@ void btrfs_delete_unused_bgs(struct btrfs_fs_info *fs_info)
 		 * We could have pending pinned extents for this block group,
 		 * just delete them, we don't care about them anymore.
 		 */
-		if (!clean_pinned_extents(trans, block_group))
+		if (!clean_pinned_extents(trans, block_group)) {
+			btrfs_dec_block_group_ro(block_group);
 			goto end_trans;
+		}
 
 		/*
 		 * At this point, the block_group is read only and should fail
diff --git a/fs/btrfs/block-rsv.c b/fs/btrfs/block-rsv.c
index 27efec8f7c5b..dbba53e712e6 100644
--- a/fs/btrfs/block-rsv.c
+++ b/fs/btrfs/block-rsv.c
@@ -5,6 +5,7 @@
 #include "block-rsv.h"
 #include "space-info.h"
 #include "transaction.h"
+#include "block-group.h"
 
 /*
  * HOW DO BLOCK RESERVES WORK
@@ -405,6 +406,8 @@ void btrfs_update_global_block_rsv(struct btrfs_fs_info *fs_info)
 	else
 		block_rsv->full = 0;
 
+	if (block_rsv->size >= sinfo->total_bytes)
+		sinfo->force_alloc = CHUNK_ALLOC_FORCE;
 	spin_unlock(&block_rsv->lock);
 	spin_unlock(&sinfo->lock);
 }
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index 27a1fefce508..e7d709505cb1 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -7,6 +7,7 @@
 #define BTRFS_INODE_H
 
 #include <linux/hash.h>
+#include <linux/refcount.h>
 #include "extent_map.h"
 #include "extent_io.h"
 #include "ordered-data.h"
@@ -293,34 +294,23 @@ static inline int btrfs_inode_in_log(struct btrfs_inode *inode, u64 generation)
 	return ret;
 }
 
-#define BTRFS_DIO_ORIG_BIO_SUBMITTED	0x1
-
 struct btrfs_dio_private {
 	struct inode *inode;
-	unsigned long flags;
 	u64 logical_offset;
 	u64 disk_bytenr;
 	u64 bytes;
-	void *private;
-
-	/* number of bios pending for this dio */
-	atomic_t pending_bios;
 
-	/* IO errors */
-	int errors;
-
-	/* orig_bio is our btrfs_io_bio */
-	struct bio *orig_bio;
+	/*
+	 * References to this structure. There is one reference per in-flight
+	 * bio plus one while we're still setting up.
+	 */
+	refcount_t refs;
 
 	/* dio_bio came from fs/direct-io.c */
 	struct bio *dio_bio;
 
-	/*
-	 * The original bio may be split to several sub-bios, this is
-	 * done during endio of sub-bios
-	 */
-	blk_status_t (*subio_endio)(struct inode *, struct btrfs_io_bio *,
-			blk_status_t);
+	/* Array of checksums */
+	u8 csums[];
 };
 
 /*
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index bfedbbe2311f..6c28efe5b14a 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1733,9 +1733,9 @@ static noinline int generic_bin_search(struct extent_buffer *eb,
  * leaves vs nodes
  */
 int btrfs_bin_search(struct extent_buffer *eb, const struct btrfs_key *key,
-		     int level, int *slot)
+		     int *slot)
 {
-	if (level == 0)
+	if (btrfs_header_level(eb) == 0)
 		return generic_bin_search(eb,
 					  offsetof(struct btrfs_leaf, items),
 					  sizeof(struct btrfs_item),
@@ -2502,10 +2502,10 @@ setup_nodes_for_search(struct btrfs_trans_handle *trans,
 }
 
 static int key_search(struct extent_buffer *b, const struct btrfs_key *key,
-		      int level, int *prev_cmp, int *slot)
+		      int *prev_cmp, int *slot)
 {
 	if (*prev_cmp != 0) {
-		*prev_cmp = btrfs_bin_search(b, key, level, slot);
+		*prev_cmp = btrfs_bin_search(b, key, slot);
 		return *prev_cmp;
 	}
 
@@ -2783,7 +2783,7 @@ int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 			}
 		}
 
-		ret = key_search(b, key, level, &prev_cmp, &slot);
+		ret = key_search(b, key, &prev_cmp, &slot);
 		if (ret < 0)
 			goto done;
 
@@ -2947,7 +2947,7 @@ int btrfs_search_old_slot(struct btrfs_root *root, const struct btrfs_key *key,
 		 * time.
 		 */
 		prev_cmp = -1;
-		ret = key_search(b, key, level, &prev_cmp, &slot);
+		ret = key_search(b, key, &prev_cmp, &slot);
 		if (ret < 0)
 			goto done;
 
@@ -5103,7 +5103,7 @@ int btrfs_search_forward(struct btrfs_root *root, struct btrfs_key *min_key,
 	while (1) {
 		nritems = btrfs_header_nritems(cur);
 		level = btrfs_header_level(cur);
-		sret = btrfs_bin_search(cur, min_key, level, &slot);
+		sret = btrfs_bin_search(cur, min_key, &slot);
 		if (sret < 0) {
 			ret = sret;
 			goto out;
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 8aa7b9dac405..e4b8f5f2273d 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2512,6 +2512,7 @@ enum btrfs_reserve_flush_enum {
 	BTRFS_RESERVE_FLUSH_LIMIT,
 	BTRFS_RESERVE_FLUSH_EVICT,
 	BTRFS_RESERVE_FLUSH_ALL,
+	BTRFS_RESERVE_FLUSH_ALL_STEAL,
 };
 
 enum btrfs_flush_state {
@@ -2551,7 +2552,7 @@ void btrfs_wait_for_snapshot_creation(struct btrfs_root *root);
 
 /* ctree.c */
 int btrfs_bin_search(struct extent_buffer *eb, const struct btrfs_key *key,
-		     int level, int *slot);
+		     int *slot);
 int __pure btrfs_comp_cpu_keys(const struct btrfs_key *k1, const struct btrfs_key *k2);
 int btrfs_previous_item(struct btrfs_root *root,
 			struct btrfs_path *path, u64 min_objectid,
@@ -3381,6 +3382,9 @@ void btrfs_reloc_pre_snapshot(struct btrfs_pending_snapshot *pending,
 int btrfs_reloc_post_snapshot(struct btrfs_trans_handle *trans,
 			      struct btrfs_pending_snapshot *pending);
 int btrfs_should_cancel_balance(struct btrfs_fs_info *fs_info);
+struct btrfs_root *find_reloc_root(struct btrfs_fs_info *fs_info,
+				   u64 bytenr);
+int btrfs_should_ignore_reloc_root(struct btrfs_root *root);
 
 /* scrub.c */
 int btrfs_scrub_dev(struct btrfs_fs_info *fs_info, u64 devid, u64 start,
diff --git a/fs/btrfs/discard.h b/fs/btrfs/discard.h
index 21a15776dac4..353228d62f5a 100644
--- a/fs/btrfs/discard.h
+++ b/fs/btrfs/discard.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 
 #ifndef BTRFS_DISCARD_H
 #define BTRFS_DISCARD_H
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index a6cb5cbbdb9f..d10c7be10f3b 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2036,9 +2036,6 @@ void btrfs_free_fs_roots(struct btrfs_fs_info *fs_info)
 		for (i = 0; i < ret; i++)
 			btrfs_drop_and_free_fs_root(fs_info, gang[i]);
 	}
-
-	if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state))
-		btrfs_free_log_root_tree(NULL, fs_info);
 }
 
 static void btrfs_init_scrub(struct btrfs_fs_info *fs_info)
@@ -3888,7 +3885,7 @@ void btrfs_drop_and_free_fs_root(struct btrfs_fs_info *fs_info,
 	spin_unlock(&fs_info->fs_roots_radix_lock);
 
 	if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
-		btrfs_free_log(NULL, root);
+		ASSERT(root->log_root == NULL);
 		if (root->reloc_root) {
 			btrfs_put_root(root->reloc_root);
 			root->reloc_root = NULL;
@@ -4211,6 +4208,36 @@ static void btrfs_error_commit_super(struct btrfs_fs_info *fs_info)
 	up_write(&fs_info->cleanup_work_sem);
 }
 
+static void btrfs_drop_all_logs(struct btrfs_fs_info *fs_info)
+{
+	struct btrfs_root *gang[8];
+	u64 root_objectid = 0;
+	int ret;
+
+	spin_lock(&fs_info->fs_roots_radix_lock);
+	while ((ret = radix_tree_gang_lookup(&fs_info->fs_roots_radix,
+					     (void **)gang, root_objectid,
+					     ARRAY_SIZE(gang))) != 0) {
+		int i;
+
+		for (i = 0; i < ret; i++)
+			gang[i] = btrfs_grab_root(gang[i]);
+		spin_unlock(&fs_info->fs_roots_radix_lock);
+
+		for (i = 0; i < ret; i++) {
+			if (!gang[i])
+				continue;
+			root_objectid = gang[i]->root_key.objectid;
+			btrfs_free_log(NULL, gang[i]);
+			btrfs_put_root(gang[i]);
+		}
+		root_objectid++;
+		spin_lock(&fs_info->fs_roots_radix_lock);
+	}
+	spin_unlock(&fs_info->fs_roots_radix_lock);
+	btrfs_free_log_root_tree(NULL, fs_info);
+}
+
 static void btrfs_destroy_ordered_extents(struct btrfs_root *root)
 {
 	struct btrfs_ordered_extent *ordered;
@@ -4603,6 +4630,7 @@ static int btrfs_cleanup_transaction(struct btrfs_fs_info *fs_info)
 	btrfs_destroy_delayed_inodes(fs_info);
 	btrfs_assert_delayed_root_empty(fs_info);
 	btrfs_destroy_all_delalloc_inodes(fs_info);
+	btrfs_drop_all_logs(fs_info);
 	mutex_unlock(&fs_info->transaction_kthread_mutex);
 
 	return 0;
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 54a64d1e18c6..faa585d54eb7 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3369,6 +3369,7 @@ static struct btrfs_block_group *btrfs_lock_cluster(
 		   struct btrfs_block_group *block_group,
 		   struct btrfs_free_cluster *cluster,
 		   int delalloc)
+	__acquires(&cluster->refill_lock)
 {
 	struct btrfs_block_group *used_bg = NULL;
 
@@ -5501,8 +5502,6 @@ int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref, int for_reloc)
 	 */
 	if (!for_reloc && !root_dropped)
 		btrfs_add_dead_root(root);
-	if (err && err != -EAGAIN)
-		btrfs_handle_fs_error(fs_info, err, NULL);
 	return err;
 }
 
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 39e45b8a5031..87d17ebd683e 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2537,8 +2537,9 @@ int btrfs_get_io_failure_record(struct inode *inode, u64 start, u64 end,
 	return 0;
 }
 
-bool btrfs_check_repairable(struct inode *inode, unsigned failed_bio_pages,
-			   struct io_failure_record *failrec, int failed_mirror)
+static bool btrfs_check_repairable(struct inode *inode, bool needs_validation,
+				   struct io_failure_record *failrec,
+				   int failed_mirror)
 {
 	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
 	int num_copies;
@@ -2561,7 +2562,7 @@ bool btrfs_check_repairable(struct inode *inode, unsigned failed_bio_pages,
 	 *	a) deliver good data to the caller
 	 *	b) correct the bad sectors on disk
 	 */
-	if (failed_bio_pages > 1) {
+	if (needs_validation) {
 		/*
 		 * to fulfill b), we need to know the exact failing sectors, as
 		 * we don't want to rewrite any more than the failed ones. thus,
@@ -2629,10 +2630,38 @@ struct bio *btrfs_create_repair_bio(struct inode *inode, struct bio *failed_bio,
 	}
 
 	bio_add_page(bio, page, failrec->len, pg_offset);
+	btrfs_io_bio(bio)->logical = failrec->start;
+	btrfs_io_bio(bio)->iter = bio->bi_iter;
 
 	return bio;
 }
 
+static bool btrfs_io_needs_validation(struct inode *inode, struct bio *bio)
+{
+	struct bio_vec *bvec;
+	u64 len = 0;
+	int i;
+
+	/*
+	 * If bi_status is BLK_STS_OK, then this was a checksum error, not an
+	 * I/O error. In this case, we already know exactly which sector was
+	 * bad, so we don't need to validate.
+	 */
+	if (bio->bi_status == BLK_STS_OK)
+		return false;
+
+	/*
+	 * We need to validate each sector individually if the failed I/O was
+	 * for multiple sectors.
+	 */
+	bio_for_each_bvec_all(bvec, bio, i) {
+		len += bvec->bv_len;
+		if (len > inode->i_sb->s_blocksize)
+			return true;
+	}
+	return false;
+}
+
 /*
  * This is a generic handler for readpage errors. If other copies exist, read
  * those and write back good data to the failed position. Does not investigate
@@ -2647,11 +2676,11 @@ static int bio_readpage_error(struct bio *failed_bio, u64 phy_offset,
 	struct inode *inode = page->mapping->host;
 	struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree;
 	struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
+	bool need_validation;
 	struct bio *bio;
 	int read_mode = 0;
 	blk_status_t status;
 	int ret;
-	unsigned failed_bio_pages = failed_bio->bi_iter.bi_size >> PAGE_SHIFT;
 
 	BUG_ON(bio_op(failed_bio) == REQ_OP_WRITE);
 
@@ -2659,13 +2688,15 @@ static int bio_readpage_error(struct bio *failed_bio, u64 phy_offset,
 	if (ret)
 		return ret;
 
-	if (!btrfs_check_repairable(inode, failed_bio_pages, failrec,
+	need_validation = btrfs_io_needs_validation(inode, failed_bio);
+
+	if (!btrfs_check_repairable(inode, need_validation, failrec,
 				    failed_mirror)) {
 		free_io_failure(failure_tree, tree, failrec);
 		return -EIO;
 	}
 
-	if (failed_bio_pages > 1)
+	if (need_validation)
 		read_mode |= REQ_FAILFAST_DEV;
 
 	phy_offset >>= inode->i_sb->s_blocksize_bits;
@@ -4367,51 +4398,32 @@ int extent_writepages(struct address_space *mapping,
 	return ret;
 }
 
-int extent_readpages(struct address_space *mapping, struct list_head *pages,
-		     unsigned nr_pages)
+void extent_readahead(struct readahead_control *rac)
 {
 	struct bio *bio = NULL;
 	unsigned long bio_flags = 0;
 	struct page *pagepool[16];
 	struct extent_map *em_cached = NULL;
-	int nr = 0;
 	u64 prev_em_start = (u64)-1;
+	int nr;
 
-	while (!list_empty(pages)) {
-		u64 contig_end = 0;
-
-		for (nr = 0; nr < ARRAY_SIZE(pagepool) && !list_empty(pages);) {
-			struct page *page = lru_to_page(pages);
-
-			prefetchw(&page->flags);
-			list_del(&page->lru);
-			if (add_to_page_cache_lru(page, mapping, page->index,
-						readahead_gfp_mask(mapping))) {
-				put_page(page);
-				break;
-			}
-
-			pagepool[nr++] = page;
-			contig_end = page_offset(page) + PAGE_SIZE - 1;
-		}
-
-		if (nr) {
-			u64 contig_start = page_offset(pagepool[0]);
+	while ((nr = readahead_page_batch(rac, pagepool))) {
+		u64 contig_start = page_offset(pagepool[0]);
+		u64 contig_end = page_offset(pagepool[nr - 1]) + PAGE_SIZE - 1;
 
-			ASSERT(contig_start + nr * PAGE_SIZE - 1 == contig_end);
+		ASSERT(contig_start + nr * PAGE_SIZE - 1 == contig_end);
 
-			contiguous_readpages(pagepool, nr, contig_start,
-				     contig_end, &em_cached, &bio, &bio_flags,
-				     &prev_em_start);
-		}
+		contiguous_readpages(pagepool, nr, contig_start, contig_end,
+				&em_cached, &bio, &bio_flags, &prev_em_start);
 	}
 
 	if (em_cached)
 		free_extent_map(em_cached);
 
-	if (bio)
-		return submit_one_bio(bio, 0, bio_flags);
-	return 0;
+	if (bio) {
+		if (submit_one_bio(bio, 0, bio_flags))
+			return;
+	}
 }
 
 /*
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 2ed65bd0760e..1508d0fc67cc 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -198,8 +198,7 @@ int extent_writepages(struct address_space *mapping,
 		      struct writeback_control *wbc);
 int btree_write_cache_pages(struct address_space *mapping,
 			    struct writeback_control *wbc);
-int extent_readpages(struct address_space *mapping, struct list_head *pages,
-		     unsigned nr_pages);
+void extent_readahead(struct readahead_control *rac);
 int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		__u64 start, __u64 len);
 void set_page_extent_mapped(struct page *page);
@@ -312,8 +311,6 @@ struct io_failure_record {
 };
 
 
-bool btrfs_check_repairable(struct inode *inode, unsigned failed_bio_pages,
-			    struct io_failure_record *failrec, int fail_mirror);
 struct bio *btrfs_create_repair_bio(struct inode *inode, struct bio *failed_bio,
 				    struct io_failure_record *failrec,
 				    struct page *page, int pg_offset, int icsum,
diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c
index b618ad5339ba..22cbb4da6d42 100644
--- a/fs/btrfs/file-item.c
+++ b/fs/btrfs/file-item.c
@@ -242,11 +242,13 @@ int btrfs_lookup_file_extent(struct btrfs_trans_handle *trans,
 /**
  * btrfs_lookup_bio_sums - Look up checksums for a bio.
  * @inode: inode that the bio is for.
- * @bio: bio embedded in btrfs_io_bio.
+ * @bio: bio to look up.
  * @offset: Unless (u64)-1, look up checksums for this offset in the file.
  *          If (u64)-1, use the page offsets from the bio instead.
- * @dst: Buffer of size btrfs_super_csum_size() used to return checksum. If
- *       NULL, the checksum is returned in btrfs_io_bio(bio)->csum instead.
+ * @dst: Buffer of size nblocks * btrfs_super_csum_size() used to return
+ *       checksum (nblocks = bio->bi_iter.bi_size / fs_info->sectorsize). If
+ *       NULL, the checksum buffer is allocated and returned in
+ *       btrfs_io_bio(bio)->csum instead.
  *
  * Return: BLK_STS_RESOURCE if allocating memory fails, BLK_STS_OK otherwise.
  */
@@ -256,7 +258,6 @@ blk_status_t btrfs_lookup_bio_sums(struct inode *inode, struct bio *bio,
 	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
 	struct bio_vec bvec;
 	struct bvec_iter iter;
-	struct btrfs_io_bio *btrfs_bio = btrfs_io_bio(bio);
 	struct btrfs_csum_item *item = NULL;
 	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
 	struct btrfs_path *path;
@@ -277,6 +278,8 @@ blk_status_t btrfs_lookup_bio_sums(struct inode *inode, struct bio *bio,
 
 	nblocks = bio->bi_iter.bi_size >> inode->i_sb->s_blocksize_bits;
 	if (!dst) {
+		struct btrfs_io_bio *btrfs_bio = btrfs_io_bio(bio);
+
 		if (nblocks * csum_size > BTRFS_BIO_INLINE_CSUM_SIZE) {
 			btrfs_bio->csum = kmalloc_array(nblocks, csum_size,
 							GFP_NOFS);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 320d1062068d..678aa4760500 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2726,10 +2726,9 @@ void btrfs_writepage_endio_finish_ordered(struct page *page, u64 start,
 	btrfs_queue_work(wq, &ordered_extent->work);
 }
 
-static int __readpage_endio_check(struct inode *inode,
-				  struct btrfs_io_bio *io_bio,
-				  int icsum, struct page *page,
-				  int pgoff, u64 start, size_t len)
+static int check_data_csum(struct inode *inode, struct btrfs_io_bio *io_bio,
+			   int icsum, struct page *page, int pgoff, u64 start,
+			   size_t len)
 {
 	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
 	SHASH_DESC_ON_STACK(shash, fs_info->csum_shash);
@@ -2790,8 +2789,8 @@ static int btrfs_readpage_end_io_hook(struct btrfs_io_bio *io_bio,
 	}
 
 	phy_offset >>= inode->i_sb->s_blocksize_bits;
-	return __readpage_endio_check(inode, io_bio, phy_offset, page, offset,
-				      start, (size_t)(end - start + 1));
+	return check_data_csum(inode, io_bio, phy_offset, page, offset, start,
+			       (size_t)(end - start + 1));
 }
 
 /*
@@ -3618,7 +3617,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir)
 	 * 1 for the inode ref
 	 * 1 for the inode
 	 */
-	return btrfs_start_transaction_fallback_global_rsv(root, 5, 5);
+	return btrfs_start_transaction_fallback_global_rsv(root, 5);
 }
 
 static int btrfs_unlink(struct inode *dir, struct dentry *dentry)
@@ -4856,8 +4855,8 @@ static void evict_inode_truncate_pages(struct inode *inode)
 
 	/*
 	 * Keep looping until we have no more ranges in the io tree.
-	 * We can have ongoing bios started by readpages (called from readahead)
-	 * that have their endio callback (extent_io.c:end_bio_extent_readpage)
+	 * We can have ongoing bios started by readahead that have
+	 * their endio callback (extent_io.c:end_bio_extent_readpage)
 	 * still in progress (unlocked the pages in the bio but did not yet
 	 * unlocked the ranges in the io tree). Therefore this means some
 	 * ranges can still be locked and eviction started because before
@@ -7050,11 +7049,11 @@ static int lock_extent_direct(struct inode *inode, u64 lockstart, u64 lockend,
 			 * for it to complete) and then invalidate the pages for
 			 * this range (through invalidate_inode_pages2_range()),
 			 * but that can lead us to a deadlock with a concurrent
-			 * call to readpages() (a buffered read or a defrag call
+			 * call to readahead (a buffered read or a defrag call
 			 * triggered a readahead) on a page lock due to an
 			 * ordered dio extent we created before but did not have
 			 * yet a corresponding bio submitted (whence it can not
-			 * complete), which makes readpages() wait for that
+			 * complete), which makes readahead wait for that
 			 * ordered extent to complete while holding a lock on
 			 * that page.
 			 */
@@ -7357,6 +7356,29 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock,
 	return ret;
 }
 
+static void btrfs_dio_private_put(struct btrfs_dio_private *dip)
+{
+	/*
+	 * This implies a barrier so that stores to dio_bio->bi_status before
+	 * this and loads of dio_bio->bi_status after this are fully ordered.
+	 */
+	if (!refcount_dec_and_test(&dip->refs))
+		return;
+
+	if (bio_op(dip->dio_bio) == REQ_OP_WRITE) {
+		__endio_write_update_ordered(dip->inode, dip->logical_offset,
+					     dip->bytes,
+					     !dip->dio_bio->bi_status);
+	} else {
+		unlock_extent(&BTRFS_I(dip->inode)->io_tree,
+			      dip->logical_offset,
+			      dip->logical_offset + dip->bytes - 1);
+	}
+
+	dio_end_io(dip->dio_bio);
+	kfree(dip);
+}
+
 static inline blk_status_t submit_dio_repair_bio(struct inode *inode,
 						 struct bio *bio,
 						 int mirror_num)
@@ -7413,19 +7435,17 @@ static int btrfs_check_dio_repairable(struct inode *inode,
 
 static blk_status_t dio_read_error(struct inode *inode, struct bio *failed_bio,
 				   struct page *page, unsigned int pgoff,
-				   u64 start, u64 end, int failed_mirror,
-				   bio_end_io_t *repair_endio, void *repair_arg)
+				   u64 start, u64 end, int failed_mirror)
 {
+	struct btrfs_dio_private *dip = failed_bio->bi_private;
 	struct io_failure_record *failrec;
 	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
 	struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
 	struct bio *bio;
 	int isector;
 	unsigned int read_mode = 0;
-	int segs;
 	int ret;
 	blk_status_t status;
-	struct bio_vec bvec;
 
 	BUG_ON(bio_op(failed_bio) == REQ_OP_WRITE);
 
@@ -7440,282 +7460,79 @@ static blk_status_t dio_read_error(struct inode *inode, struct bio *failed_bio,
 		return BLK_STS_IOERR;
 	}
 
-	segs = bio_segments(failed_bio);
-	bio_get_first_bvec(failed_bio, &bvec);
-	if (segs > 1 ||
-	    (bvec.bv_len > btrfs_inode_sectorsize(inode)))
+	if (btrfs_io_bio(failed_bio)->iter.bi_size > inode->i_sb->s_blocksize)
 		read_mode |= REQ_FAILFAST_DEV;
 
 	isector = start - btrfs_io_bio(failed_bio)->logical;
 	isector >>= inode->i_sb->s_blocksize_bits;
-	bio = btrfs_create_repair_bio(inode, failed_bio, failrec, page,
-				pgoff, isector, repair_endio, repair_arg);
+	bio = btrfs_create_repair_bio(inode, failed_bio, failrec, page, pgoff,
+				      isector, failed_bio->bi_end_io, dip);
 	bio->bi_opf = REQ_OP_READ | read_mode;
 
 	btrfs_debug(BTRFS_I(inode)->root->fs_info,
 		    "repair DIO read error: submitting new dio read[%#x] to this_mirror=%d, in_validation=%d",
 		    read_mode, failrec->this_mirror, failrec->in_validation);
 
+	refcount_inc(&dip->refs);
 	status = submit_dio_repair_bio(inode, bio, failrec->this_mirror);
 	if (status) {
 		free_io_failure(failure_tree, io_tree, failrec);
 		bio_put(bio);
+		refcount_dec(&dip->refs);
 	}
 
 	return status;
 }
 
-struct btrfs_retry_complete {
-	struct completion done;
-	struct inode *inode;
-	u64 start;
-	int uptodate;
-};
-
-static void btrfs_retry_endio_nocsum(struct bio *bio)
-{
-	struct btrfs_retry_complete *done = bio->bi_private;
-	struct inode *inode = done->inode;
-	struct bio_vec *bvec;
-	struct extent_io_tree *io_tree, *failure_tree;
-	struct bvec_iter_all iter_all;
-
-	if (bio->bi_status)
-		goto end;
-
-	ASSERT(bio->bi_vcnt == 1);
-	io_tree = &BTRFS_I(inode)->io_tree;
-	failure_tree = &BTRFS_I(inode)->io_failure_tree;
-	ASSERT(bio_first_bvec_all(bio)->bv_len == btrfs_inode_sectorsize(inode));
-
-	done->uptodate = 1;
-	ASSERT(!bio_flagged(bio, BIO_CLONED));
-	bio_for_each_segment_all(bvec, bio, iter_all)
-		clean_io_failure(BTRFS_I(inode)->root->fs_info, failure_tree,
-				 io_tree, done->start, bvec->bv_page,
-				 btrfs_ino(BTRFS_I(inode)), 0);
-end:
-	complete(&done->done);
-	bio_put(bio);
-}
-
-static blk_status_t __btrfs_correct_data_nocsum(struct inode *inode,
-						struct btrfs_io_bio *io_bio)
+static blk_status_t btrfs_check_read_dio_bio(struct inode *inode,
+					     struct btrfs_io_bio *io_bio,
+					     const bool uptodate)
 {
-	struct btrfs_fs_info *fs_info;
+	struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info;
+	const u32 sectorsize = fs_info->sectorsize;
+	struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
+	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+	const bool csum = !(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM);
 	struct bio_vec bvec;
 	struct bvec_iter iter;
-	struct btrfs_retry_complete done;
-	u64 start;
-	unsigned int pgoff;
-	u32 sectorsize;
-	int nr_sectors;
-	blk_status_t ret;
+	u64 start = io_bio->logical;
+	int icsum = 0;
 	blk_status_t err = BLK_STS_OK;
 
-	fs_info = BTRFS_I(inode)->root->fs_info;
-	sectorsize = fs_info->sectorsize;
+	__bio_for_each_segment(bvec, &io_bio->bio, iter, io_bio->iter) {
+		unsigned int i, nr_sectors, pgoff;
 
-	start = io_bio->logical;
-	done.inode = inode;
-	io_bio->bio.bi_iter = io_bio->iter;
-
-	bio_for_each_segment(bvec, &io_bio->bio, iter) {
 		nr_sectors = BTRFS_BYTES_TO_BLKS(fs_info, bvec.bv_len);
 		pgoff = bvec.bv_offset;
-
-next_block_or_try_again:
-		done.uptodate = 0;
-		done.start = start;
-		init_completion(&done.done);
-
-		ret = dio_read_error(inode, &io_bio->bio, bvec.bv_page,
-				pgoff, start, start + sectorsize - 1,
-				io_bio->mirror_num,
-				btrfs_retry_endio_nocsum, &done);
-		if (ret) {
-			err = ret;
-			goto next;
-		}
-
-		wait_for_completion_io(&done.done);
-
-		if (!done.uptodate) {
-			/* We might have another mirror, so try again */
-			goto next_block_or_try_again;
-		}
-
-next:
-		start += sectorsize;
-
-		nr_sectors--;
-		if (nr_sectors) {
-			pgoff += sectorsize;
+		for (i = 0; i < nr_sectors; i++) {
 			ASSERT(pgoff < PAGE_SIZE);
-			goto next_block_or_try_again;
-		}
-	}
-
-	return err;
-}
-
-static void btrfs_retry_endio(struct bio *bio)
-{
-	struct btrfs_retry_complete *done = bio->bi_private;
-	struct btrfs_io_bio *io_bio = btrfs_io_bio(bio);
-	struct extent_io_tree *io_tree, *failure_tree;
-	struct inode *inode = done->inode;
-	struct bio_vec *bvec;
-	int uptodate;
-	int ret;
-	int i = 0;
-	struct bvec_iter_all iter_all;
-
-	if (bio->bi_status)
-		goto end;
-
-	uptodate = 1;
-
-	ASSERT(bio->bi_vcnt == 1);
-	ASSERT(bio_first_bvec_all(bio)->bv_len == btrfs_inode_sectorsize(done->inode));
-
-	io_tree = &BTRFS_I(inode)->io_tree;
-	failure_tree = &BTRFS_I(inode)->io_failure_tree;
-
-	ASSERT(!bio_flagged(bio, BIO_CLONED));
-	bio_for_each_segment_all(bvec, bio, iter_all) {
-		ret = __readpage_endio_check(inode, io_bio, i, bvec->bv_page,
-					     bvec->bv_offset, done->start,
-					     bvec->bv_len);
-		if (!ret)
-			clean_io_failure(BTRFS_I(inode)->root->fs_info,
-					 failure_tree, io_tree, done->start,
-					 bvec->bv_page,
-					 btrfs_ino(BTRFS_I(inode)),
-					 bvec->bv_offset);
-		else
-			uptodate = 0;
-		i++;
-	}
-
-	done->uptodate = uptodate;
-end:
-	complete(&done->done);
-	bio_put(bio);
-}
-
-static blk_status_t __btrfs_subio_endio_read(struct inode *inode,
-		struct btrfs_io_bio *io_bio, blk_status_t err)
-{
-	struct btrfs_fs_info *fs_info;
-	struct bio_vec bvec;
-	struct bvec_iter iter;
-	struct btrfs_retry_complete done;
-	u64 start;
-	u64 offset = 0;
-	u32 sectorsize;
-	int nr_sectors;
-	unsigned int pgoff;
-	int csum_pos;
-	bool uptodate = (err == 0);
-	int ret;
-	blk_status_t status;
-
-	fs_info = BTRFS_I(inode)->root->fs_info;
-	sectorsize = fs_info->sectorsize;
-
-	err = BLK_STS_OK;
-	start = io_bio->logical;
-	done.inode = inode;
-	io_bio->bio.bi_iter = io_bio->iter;
-
-	bio_for_each_segment(bvec, &io_bio->bio, iter) {
-		nr_sectors = BTRFS_BYTES_TO_BLKS(fs_info, bvec.bv_len);
-
-		pgoff = bvec.bv_offset;
-next_block:
-		if (uptodate) {
-			csum_pos = BTRFS_BYTES_TO_BLKS(fs_info, offset);
-			ret = __readpage_endio_check(inode, io_bio, csum_pos,
-					bvec.bv_page, pgoff, start, sectorsize);
-			if (likely(!ret))
-				goto next;
-		}
-try_again:
-		done.uptodate = 0;
-		done.start = start;
-		init_completion(&done.done);
-
-		status = dio_read_error(inode, &io_bio->bio, bvec.bv_page,
-					pgoff, start, start + sectorsize - 1,
-					io_bio->mirror_num, btrfs_retry_endio,
-					&done);
-		if (status) {
-			err = status;
-			goto next;
-		}
-
-		wait_for_completion_io(&done.done);
-
-		if (!done.uptodate) {
-			/* We might have another mirror, so try again */
-			goto try_again;
-		}
-next:
-		offset += sectorsize;
-		start += sectorsize;
-
-		ASSERT(nr_sectors);
-
-		nr_sectors--;
-		if (nr_sectors) {
+			if (uptodate &&
+			    (!csum || !check_data_csum(inode, io_bio, icsum,
+						       bvec.bv_page, pgoff,
+						       start, sectorsize))) {
+				clean_io_failure(fs_info, failure_tree, io_tree,
+						 start, bvec.bv_page,
+						 btrfs_ino(BTRFS_I(inode)),
+						 pgoff);
+			} else {
+				blk_status_t status;
+
+				status = dio_read_error(inode, &io_bio->bio,
+							bvec.bv_page, pgoff,
+							start,
+							start + sectorsize - 1,
+							io_bio->mirror_num);
+				if (status)
+					err = status;
+			}
+			start += sectorsize;
+			icsum++;
 			pgoff += sectorsize;
-			ASSERT(pgoff < PAGE_SIZE);
-			goto next_block;
 		}
 	}
-
 	return err;
 }
 
-static blk_status_t btrfs_subio_endio_read(struct inode *inode,
-		struct btrfs_io_bio *io_bio, blk_status_t err)
-{
-	bool skip_csum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM;
-
-	if (skip_csum) {
-		if (unlikely(err))
-			return __btrfs_correct_data_nocsum(inode, io_bio);
-		else
-			return BLK_STS_OK;
-	} else {
-		return __btrfs_subio_endio_read(inode, io_bio, err);
-	}
-}
-
-static void btrfs_endio_direct_read(struct bio *bio)
-{
-	struct btrfs_dio_private *dip = bio->bi_private;
-	struct inode *inode = dip->inode;
-	struct bio *dio_bio;
-	struct btrfs_io_bio *io_bio = btrfs_io_bio(bio);
-	blk_status_t err = bio->bi_status;
-
-	if (dip->flags & BTRFS_DIO_ORIG_BIO_SUBMITTED)
-		err = btrfs_subio_endio_read(inode, io_bio, err);
-
-	unlock_extent(&BTRFS_I(inode)->io_tree, dip->logical_offset,
-		      dip->logical_offset + dip->bytes - 1);
-	dio_bio = dip->dio_bio;
-
-	kfree(dip);
-
-	dio_bio->bi_status = err;
-	dio_end_io(dio_bio);
-	btrfs_io_bio_free_csum(io_bio);
-	bio_put(bio);
-}
-
 static void __endio_write_update_ordered(struct inode *inode,
 					 const u64 offset, const u64 bytes,
 					 const bool uptodate)
@@ -7759,21 +7576,6 @@ static void __endio_write_update_ordered(struct inode *inode,
 	}
 }
 
-static void btrfs_endio_direct_write(struct bio *bio)
-{
-	struct btrfs_dio_private *dip = bio->bi_private;
-	struct bio *dio_bio = dip->dio_bio;
-
-	__endio_write_update_ordered(dip->inode, dip->logical_offset,
-				     dip->bytes, !bio->bi_status);
-
-	kfree(dip);
-
-	dio_bio->bi_status = bio->bi_status;
-	dio_end_io(dio_bio);
-	bio_put(bio);
-}
-
 static blk_status_t btrfs_submit_bio_start_direct_io(void *private_data,
 				    struct bio *bio, u64 offset)
 {
@@ -7797,64 +7599,16 @@ static void btrfs_end_dio_bio(struct bio *bio)
 			   (unsigned long long)bio->bi_iter.bi_sector,
 			   bio->bi_iter.bi_size, err);
 
-	if (dip->subio_endio)
-		err = dip->subio_endio(dip->inode, btrfs_io_bio(bio), err);
-
-	if (err) {
-		/*
-		 * We want to perceive the errors flag being set before
-		 * decrementing the reference count. We don't need a barrier
-		 * since atomic operations with a return value are fully
-		 * ordered as per atomic_t.txt
-		 */
-		dip->errors = 1;
+	if (bio_op(bio) == REQ_OP_READ) {
+		err = btrfs_check_read_dio_bio(dip->inode, btrfs_io_bio(bio),
+					       !err);
 	}
 
-	/* if there are more bios still pending for this dio, just exit */
-	if (!atomic_dec_and_test(&dip->pending_bios))
-		goto out;
+	if (err)
+		dip->dio_bio->bi_status = err;
 
-	if (dip->errors) {
-		bio_io_error(dip->orig_bio);
-	} else {
-		dip->dio_bio->bi_status = BLK_STS_OK;
-		bio_endio(dip->orig_bio);
-	}
-out:
 	bio_put(bio);
-}
-
-static inline blk_status_t btrfs_lookup_and_bind_dio_csum(struct inode *inode,
-						 struct btrfs_dio_private *dip,
-						 struct bio *bio,
-						 u64 file_offset)
-{
-	struct btrfs_io_bio *io_bio = btrfs_io_bio(bio);
-	struct btrfs_io_bio *orig_io_bio = btrfs_io_bio(dip->orig_bio);
-	u16 csum_size;
-	blk_status_t ret;
-
-	/*
-	 * We load all the csum data we need when we submit
-	 * the first bio to reduce the csum tree search and
-	 * contention.
-	 */
-	if (dip->logical_offset == file_offset) {
-		ret = btrfs_lookup_bio_sums(inode, dip->orig_bio, file_offset,
-					    NULL);
-		if (ret)
-			return ret;
-	}
-
-	if (bio == dip->orig_bio)
-		return 0;
-
-	file_offset -= dip->logical_offset;
-	file_offset >>= inode->i_sb->s_blocksize_bits;
-	csum_size = btrfs_super_csum_size(btrfs_sb(inode->i_sb)->super_copy);
-	io_bio->csum = orig_io_bio->csum + csum_size * file_offset;
-
-	return 0;
+	btrfs_dio_private_put(dip);
 }
 
 static inline blk_status_t btrfs_submit_dio_bio(struct bio *bio,
@@ -7892,10 +7646,12 @@ static inline blk_status_t btrfs_submit_dio_bio(struct bio *bio,
 		if (ret)
 			goto err;
 	} else {
-		ret = btrfs_lookup_and_bind_dio_csum(inode, dip, bio,
-						     file_offset);
-		if (ret)
-			goto err;
+		u64 csum_offset;
+
+		csum_offset = file_offset - dip->logical_offset;
+		csum_offset >>= inode->i_sb->s_blocksize_bits;
+		csum_offset *= btrfs_super_csum_size(fs_info->super_copy);
+		btrfs_io_bio(bio)->csum = dip->csums + csum_offset;
 	}
 map:
 	ret = btrfs_map_bio(fs_info, bio, 0);
@@ -7903,14 +7659,66 @@ static inline blk_status_t btrfs_submit_dio_bio(struct bio *bio,
 	return ret;
 }
 
-static int btrfs_submit_direct_hook(struct btrfs_dio_private *dip)
+/*
+ * If this succeeds, the btrfs_dio_private is responsible for cleaning up locked
+ * or ordered extents whether or not we submit any bios.
+ */
+static struct btrfs_dio_private *btrfs_create_dio_private(struct bio *dio_bio,
+							  struct inode *inode,
+							  loff_t file_offset)
 {
-	struct inode *inode = dip->inode;
+	const bool write = (bio_op(dio_bio) == REQ_OP_WRITE);
+	const bool csum = !(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM);
+	size_t dip_size;
+	struct btrfs_dio_private *dip;
+
+	dip_size = sizeof(*dip);
+	if (!write && csum) {
+		struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
+		const u16 csum_size = btrfs_super_csum_size(fs_info->super_copy);
+		size_t nblocks;
+
+		nblocks = dio_bio->bi_iter.bi_size >> inode->i_sb->s_blocksize_bits;
+		dip_size += csum_size * nblocks;
+	}
+
+	dip = kzalloc(dip_size, GFP_NOFS);
+	if (!dip)
+		return NULL;
+
+	dip->inode = inode;
+	dip->logical_offset = file_offset;
+	dip->bytes = dio_bio->bi_iter.bi_size;
+	dip->disk_bytenr = (u64)dio_bio->bi_iter.bi_sector << 9;
+	dip->dio_bio = dio_bio;
+	refcount_set(&dip->refs, 1);
+
+	if (write) {
+		struct btrfs_dio_data *dio_data = current->journal_info;
+
+		/*
+		 * Setting range start and end to the same value means that
+		 * no cleanup will happen in btrfs_direct_IO
+		 */
+		dio_data->unsubmitted_oe_range_end = dip->logical_offset +
+			dip->bytes;
+		dio_data->unsubmitted_oe_range_start =
+			dio_data->unsubmitted_oe_range_end;
+	}
+	return dip;
+}
+
+static void btrfs_submit_direct(struct bio *dio_bio, struct inode *inode,
+				loff_t file_offset)
+{
+	const bool write = (bio_op(dio_bio) == REQ_OP_WRITE);
+	const bool csum = !(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM);
 	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
+	const bool raid56 = (btrfs_data_alloc_profile(fs_info) &
+			     BTRFS_BLOCK_GROUP_RAID56_MASK);
+	struct btrfs_dio_private *dip;
 	struct bio *bio;
-	struct bio *orig_bio = dip->orig_bio;
-	u64 start_sector = orig_bio->bi_iter.bi_sector;
-	u64 file_offset = dip->logical_offset;
+	u64 start_sector;
 	int async_submit = 0;
 	u64 submit_len;
 	int clone_offset = 0;
@@ -7919,188 +7727,94 @@ static int btrfs_submit_direct_hook(struct btrfs_dio_private *dip)
 	blk_status_t status;
 	struct btrfs_io_geometry geom;
 
-	submit_len = orig_bio->bi_iter.bi_size;
-	ret = btrfs_get_io_geometry(fs_info, btrfs_op(orig_bio),
-				    start_sector << 9, submit_len, &geom);
-	if (ret)
-		return -EIO;
+	dip = btrfs_create_dio_private(dio_bio, inode, file_offset);
+	if (!dip) {
+		if (!write) {
+			unlock_extent(&BTRFS_I(inode)->io_tree, file_offset,
+				file_offset + dio_bio->bi_iter.bi_size - 1);
+		}
+		dio_bio->bi_status = BLK_STS_RESOURCE;
+		dio_end_io(dio_bio);
+		return;
+	}
 
-	if (geom.len >= submit_len) {
-		bio = orig_bio;
-		dip->flags |= BTRFS_DIO_ORIG_BIO_SUBMITTED;
-		goto submit;
+	if (!write && csum) {
+		/*
+		 * Load the csums up front to reduce csum tree searches and
+		 * contention when submitting bios.
+		 */
+		status = btrfs_lookup_bio_sums(inode, dio_bio, file_offset,
+					       dip->csums);
+		if (status != BLK_STS_OK)
+			goto out_err;
 	}
 
-	/* async crcs make it difficult to collect full stripe writes. */
-	if (btrfs_data_alloc_profile(fs_info) & BTRFS_BLOCK_GROUP_RAID56_MASK)
-		async_submit = 0;
-	else
-		async_submit = 1;
+	start_sector = dio_bio->bi_iter.bi_sector;
+	submit_len = dio_bio->bi_iter.bi_size;
 
-	/* bio split */
-	ASSERT(geom.len <= INT_MAX);
-	atomic_inc(&dip->pending_bios);
 	do {
+		ret = btrfs_get_io_geometry(fs_info, btrfs_op(dio_bio),
+					    start_sector << 9, submit_len,
+					    &geom);
+		if (ret) {
+			status = errno_to_blk_status(ret);
+			goto out_err;
+		}
+		ASSERT(geom.len <= INT_MAX);
+
 		clone_len = min_t(int, submit_len, geom.len);
 
 		/*
 		 * This will never fail as it's passing GPF_NOFS and
 		 * the allocation is backed by btrfs_bioset.
 		 */
-		bio = btrfs_bio_clone_partial(orig_bio, clone_offset,
-					      clone_len);
+		bio = btrfs_bio_clone_partial(dio_bio, clone_offset, clone_len);
 		bio->bi_private = dip;
 		bio->bi_end_io = btrfs_end_dio_bio;
 		btrfs_io_bio(bio)->logical = file_offset;
 
 		ASSERT(submit_len >= clone_len);
 		submit_len -= clone_len;
-		if (submit_len == 0)
-			break;
 
 		/*
 		 * Increase the count before we submit the bio so we know
 		 * the end IO handler won't happen before we increase the
 		 * count. Otherwise, the dip might get freed before we're
 		 * done setting it up.
+		 *
+		 * We transfer the initial reference to the last bio, so we
+		 * don't need to increment the reference count for the last one.
 		 */
-		atomic_inc(&dip->pending_bios);
+		if (submit_len > 0) {
+			refcount_inc(&dip->refs);
+			/*
+			 * If we are submitting more than one bio, submit them
+			 * all asynchronously. The exception is RAID 5 or 6, as
+			 * asynchronous checksums make it difficult to collect
+			 * full stripe writes.
+			 */
+			if (!raid56)
+				async_submit = 1;
+		}
 
 		status = btrfs_submit_dio_bio(bio, inode, file_offset,
 						async_submit);
 		if (status) {
 			bio_put(bio);
-			atomic_dec(&dip->pending_bios);
+			if (submit_len > 0)
+				refcount_dec(&dip->refs);
 			goto out_err;
 		}
 
 		clone_offset += clone_len;
 		start_sector += clone_len >> 9;
 		file_offset += clone_len;
-
-		ret = btrfs_get_io_geometry(fs_info, btrfs_op(orig_bio),
-				      start_sector << 9, submit_len, &geom);
-		if (ret)
-			goto out_err;
 	} while (submit_len > 0);
+	return;
 
-submit:
-	status = btrfs_submit_dio_bio(bio, inode, file_offset, async_submit);
-	if (!status)
-		return 0;
-
-	bio_put(bio);
 out_err:
-	dip->errors = 1;
-	/*
-	 * Before atomic variable goto zero, we must  make sure dip->errors is
-	 * perceived to be set. This ordering is ensured by the fact that an
-	 * atomic operations with a return value are fully ordered as per
-	 * atomic_t.txt
-	 */
-	if (atomic_dec_and_test(&dip->pending_bios))
-		bio_io_error(dip->orig_bio);
-
-	/* bio_end_io() will handle error, so we needn't return it */
-	return 0;
-}
-
-static void btrfs_submit_direct(struct bio *dio_bio, struct inode *inode,
-				loff_t file_offset)
-{
-	struct btrfs_dio_private *dip = NULL;
-	struct bio *bio = NULL;
-	struct btrfs_io_bio *io_bio;
-	bool write = (bio_op(dio_bio) == REQ_OP_WRITE);
-	int ret = 0;
-
-	bio = btrfs_bio_clone(dio_bio);
-
-	dip = kzalloc(sizeof(*dip), GFP_NOFS);
-	if (!dip) {
-		ret = -ENOMEM;
-		goto free_ordered;
-	}
-
-	dip->private = dio_bio->bi_private;
-	dip->inode = inode;
-	dip->logical_offset = file_offset;
-	dip->bytes = dio_bio->bi_iter.bi_size;
-	dip->disk_bytenr = (u64)dio_bio->bi_iter.bi_sector << 9;
-	bio->bi_private = dip;
-	dip->orig_bio = bio;
-	dip->dio_bio = dio_bio;
-	atomic_set(&dip->pending_bios, 0);
-	io_bio = btrfs_io_bio(bio);
-	io_bio->logical = file_offset;
-
-	if (write) {
-		bio->bi_end_io = btrfs_endio_direct_write;
-	} else {
-		bio->bi_end_io = btrfs_endio_direct_read;
-		dip->subio_endio = btrfs_subio_endio_read;
-	}
-
-	/*
-	 * Reset the range for unsubmitted ordered extents (to a 0 length range)
-	 * even if we fail to submit a bio, because in such case we do the
-	 * corresponding error handling below and it must not be done a second
-	 * time by btrfs_direct_IO().
-	 */
-	if (write) {
-		struct btrfs_dio_data *dio_data = current->journal_info;
-
-		dio_data->unsubmitted_oe_range_end = dip->logical_offset +
-			dip->bytes;
-		dio_data->unsubmitted_oe_range_start =
-			dio_data->unsubmitted_oe_range_end;
-	}
-
-	ret = btrfs_submit_direct_hook(dip);
-	if (!ret)
-		return;
-
-	btrfs_io_bio_free_csum(io_bio);
-
-free_ordered:
-	/*
-	 * If we arrived here it means either we failed to submit the dip
-	 * or we either failed to clone the dio_bio or failed to allocate the
-	 * dip. If we cloned the dio_bio and allocated the dip, we can just
-	 * call bio_endio against our io_bio so that we get proper resource
-	 * cleanup if we fail to submit the dip, otherwise, we must do the
-	 * same as btrfs_endio_direct_[write|read] because we can't call these
-	 * callbacks - they require an allocated dip and a clone of dio_bio.
-	 */
-	if (bio && dip) {
-		bio_io_error(bio);
-		/*
-		 * The end io callbacks free our dip, do the final put on bio
-		 * and all the cleanup and final put for dio_bio (through
-		 * dio_end_io()).
-		 */
-		dip = NULL;
-		bio = NULL;
-	} else {
-		if (write)
-			__endio_write_update_ordered(inode,
-						file_offset,
-						dio_bio->bi_iter.bi_size,
-						false);
-		else
-			unlock_extent(&BTRFS_I(inode)->io_tree, file_offset,
-			      file_offset + dio_bio->bi_iter.bi_size - 1);
-
-		dio_bio->bi_status = BLK_STS_IOERR;
-		/*
-		 * Releases and cleans up our dio_bio, no need to bio_put()
-		 * nor bio_endio()/bio_io_error() against dio_bio.
-		 */
-		dio_end_io(dio_bio);
-	}
-	if (bio)
-		bio_put(bio);
-	kfree(dip);
+	dip->dio_bio->bi_status = status;
+	btrfs_dio_private_put(dip);
 }
 
 static ssize_t check_direct_IO(struct btrfs_fs_info *fs_info,
@@ -8293,11 +8007,9 @@ static int btrfs_writepages(struct address_space *mapping,
 	return extent_writepages(mapping, wbc);
 }
 
-static int
-btrfs_readpages(struct file *file, struct address_space *mapping,
-		struct list_head *pages, unsigned nr_pages)
+static void btrfs_readahead(struct readahead_control *rac)
 {
-	return extent_readpages(mapping, pages, nr_pages);
+	extent_readahead(rac);
 }
 
 static int __btrfs_releasepage(struct page *page, gfp_t gfp_flags)
@@ -10553,7 +10265,7 @@ static const struct address_space_operations btrfs_aops = {
 	.readpage	= btrfs_readpage,
 	.writepage	= btrfs_writepage,
 	.writepages	= btrfs_writepages,
-	.readpages	= btrfs_readpages,
+	.readahead	= btrfs_readahead,
 	.direct_IO	= btrfs_direct_IO,
 	.invalidatepage = btrfs_invalidatepage,
 	.releasepage	= btrfs_releasepage,
diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c
index fb647d8cf527..f75612e18a82 100644
--- a/fs/btrfs/locking.c
+++ b/fs/btrfs/locking.c
@@ -410,6 +410,7 @@ void btrfs_tree_read_unlock_blocking(struct extent_buffer *eb)
  * The rwlock is held for write upon exit.
  */
 void btrfs_tree_lock(struct extent_buffer *eb)
+	__acquires(&eb->lock)
 {
 	u64 start_ns = 0;
 
diff --git a/fs/btrfs/misc.h b/fs/btrfs/misc.h
index 72bab64ecf60..6461ebc3a1c1 100644
--- a/fs/btrfs/misc.h
+++ b/fs/btrfs/misc.h
@@ -6,6 +6,7 @@
 #include <linux/sched.h>
 #include <linux/wait.h>
 #include <asm/div64.h>
+#include <linux/rbtree.h>
 
 #define in_range(b, first, len) ((b) >= (first) && (b) < (first) + (len))
 
@@ -58,4 +59,57 @@ static inline bool has_single_bit_set(u64 n)
 	return is_power_of_two_u64(n);
 }
 
+/*
+ * Simple bytenr based rb_tree relate structures
+ *
+ * Any structure wants to use bytenr as single search index should have their
+ * structure start with these members.
+ */
+struct rb_simple_node {
+	struct rb_node rb_node;
+	u64 bytenr;
+};
+
+static inline struct rb_node *rb_simple_search(struct rb_root *root, u64 bytenr)
+{
+	struct rb_node *node = root->rb_node;
+	struct rb_simple_node *entry;
+
+	while (node) {
+		entry = rb_entry(node, struct rb_simple_node, rb_node);
+
+		if (bytenr < entry->bytenr)
+			node = node->rb_left;
+		else if (bytenr > entry->bytenr)
+			node = node->rb_right;
+		else
+			return node;
+	}
+	return NULL;
+}
+
+static inline struct rb_node *rb_simple_insert(struct rb_root *root, u64 bytenr,
+					       struct rb_node *node)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct rb_simple_node *entry;
+
+	while (*p) {
+		parent = *p;
+		entry = rb_entry(parent, struct rb_simple_node, rb_node);
+
+		if (bytenr < entry->bytenr)
+			p = &(*p)->rb_left;
+		else if (bytenr > entry->bytenr)
+			p = &(*p)->rb_right;
+		else
+			return parent;
+	}
+
+	rb_link_node(node, parent, p);
+	rb_insert_color(node, root);
+	return NULL;
+}
+
 #endif
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index d35936c934ab..f25deca18a5d 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -24,6 +24,7 @@
 #include "delalloc-space.h"
 #include "block-group.h"
 #include "backref.h"
+#include "misc.h"
 
 /*
  * Relocation overview
@@ -72,100 +73,15 @@
  * The entry point of relocation is relocate_block_group() function.
  */
 
-/*
- * backref_node, mapping_node and tree_block start with this
- */
-struct tree_entry {
-	struct rb_node rb_node;
-	u64 bytenr;
-};
-
-/*
- * present a tree block in the backref cache
- */
-struct backref_node {
-	struct rb_node rb_node;
-	u64 bytenr;
-
-	u64 new_bytenr;
-	/* objectid of tree block owner, can be not uptodate */
-	u64 owner;
-	/* link to pending, changed or detached list */
-	struct list_head list;
-	/* list of upper level blocks reference this block */
-	struct list_head upper;
-	/* list of child blocks in the cache */
-	struct list_head lower;
-	/* NULL if this node is not tree root */
-	struct btrfs_root *root;
-	/* extent buffer got by COW the block */
-	struct extent_buffer *eb;
-	/* level of tree block */
-	unsigned int level:8;
-	/* is the block in non-reference counted tree */
-	unsigned int cowonly:1;
-	/* 1 if no child node in the cache */
-	unsigned int lowest:1;
-	/* is the extent buffer locked */
-	unsigned int locked:1;
-	/* has the block been processed */
-	unsigned int processed:1;
-	/* have backrefs of this block been checked */
-	unsigned int checked:1;
-	/*
-	 * 1 if corresponding block has been cowed but some upper
-	 * level block pointers may not point to the new location
-	 */
-	unsigned int pending:1;
-	/*
-	 * 1 if the backref node isn't connected to any other
-	 * backref node.
-	 */
-	unsigned int detached:1;
-};
-
-/*
- * present a block pointer in the backref cache
- */
-struct backref_edge {
-	struct list_head list[2];
-	struct backref_node *node[2];
-};
-
-#define LOWER	0
-#define UPPER	1
 #define RELOCATION_RESERVED_NODES	256
-
-struct backref_cache {
-	/* red black tree of all backref nodes in the cache */
-	struct rb_root rb_root;
-	/* for passing backref nodes to btrfs_reloc_cow_block */
-	struct backref_node *path[BTRFS_MAX_LEVEL];
-	/*
-	 * list of blocks that have been cowed but some block
-	 * pointers in upper level blocks may not reflect the
-	 * new location
-	 */
-	struct list_head pending[BTRFS_MAX_LEVEL];
-	/* list of backref nodes with no child node */
-	struct list_head leaves;
-	/* list of blocks that have been cowed in current transaction */
-	struct list_head changed;
-	/* list of detached backref node. */
-	struct list_head detached;
-
-	u64 last_trans;
-
-	int nr_nodes;
-	int nr_edges;
-};
-
 /*
  * map address of tree root to tree
  */
 struct mapping_node {
-	struct rb_node rb_node;
-	u64 bytenr;
+	struct {
+		struct rb_node rb_node;
+		u64 bytenr;
+	}; /* Use rb_simle_node for search/insert */
 	void *data;
 };
 
@@ -178,8 +94,10 @@ struct mapping_tree {
  * present a tree block to process
  */
 struct tree_block {
-	struct rb_node rb_node;
-	u64 bytenr;
+	struct {
+		struct rb_node rb_node;
+		u64 bytenr;
+	}; /* Use rb_simple_node for search/insert */
 	struct btrfs_key key;
 	unsigned int level:8;
 	unsigned int key_ready:1;
@@ -204,7 +122,7 @@ struct reloc_control {
 
 	struct btrfs_block_rsv *block_rsv;
 
-	struct backref_cache backref_cache;
+	struct btrfs_backref_cache backref_cache;
 
 	struct file_extent_cluster cluster;
 	/* tree blocks have been processed */
@@ -235,168 +153,41 @@ struct reloc_control {
 #define MOVE_DATA_EXTENTS	0
 #define UPDATE_DATA_PTRS	1
 
-static void remove_backref_node(struct backref_cache *cache,
-				struct backref_node *node);
-static void __mark_block_processed(struct reloc_control *rc,
-				   struct backref_node *node);
-
-static void mapping_tree_init(struct mapping_tree *tree)
-{
-	tree->rb_root = RB_ROOT;
-	spin_lock_init(&tree->lock);
-}
-
-static void backref_cache_init(struct backref_cache *cache)
-{
-	int i;
-	cache->rb_root = RB_ROOT;
-	for (i = 0; i < BTRFS_MAX_LEVEL; i++)
-		INIT_LIST_HEAD(&cache->pending[i]);
-	INIT_LIST_HEAD(&cache->changed);
-	INIT_LIST_HEAD(&cache->detached);
-	INIT_LIST_HEAD(&cache->leaves);
-}
-
-static void backref_cache_cleanup(struct backref_cache *cache)
-{
-	struct backref_node *node;
-	int i;
-
-	while (!list_empty(&cache->detached)) {
-		node = list_entry(cache->detached.next,
-				  struct backref_node, list);
-		remove_backref_node(cache, node);
-	}
-
-	while (!list_empty(&cache->leaves)) {
-		node = list_entry(cache->leaves.next,
-				  struct backref_node, lower);
-		remove_backref_node(cache, node);
-	}
-
-	cache->last_trans = 0;
-
-	for (i = 0; i < BTRFS_MAX_LEVEL; i++)
-		ASSERT(list_empty(&cache->pending[i]));
-	ASSERT(list_empty(&cache->changed));
-	ASSERT(list_empty(&cache->detached));
-	ASSERT(RB_EMPTY_ROOT(&cache->rb_root));
-	ASSERT(!cache->nr_nodes);
-	ASSERT(!cache->nr_edges);
-}
-
-static struct backref_node *alloc_backref_node(struct backref_cache *cache)
-{
-	struct backref_node *node;
-
-	node = kzalloc(sizeof(*node), GFP_NOFS);
-	if (node) {
-		INIT_LIST_HEAD(&node->list);
-		INIT_LIST_HEAD(&node->upper);
-		INIT_LIST_HEAD(&node->lower);
-		RB_CLEAR_NODE(&node->rb_node);
-		cache->nr_nodes++;
-	}
-	return node;
-}
-
-static void free_backref_node(struct backref_cache *cache,
-			      struct backref_node *node)
-{
-	if (node) {
-		cache->nr_nodes--;
-		btrfs_put_root(node->root);
-		kfree(node);
-	}
-}
-
-static struct backref_edge *alloc_backref_edge(struct backref_cache *cache)
-{
-	struct backref_edge *edge;
-
-	edge = kzalloc(sizeof(*edge), GFP_NOFS);
-	if (edge)
-		cache->nr_edges++;
-	return edge;
-}
-
-static void free_backref_edge(struct backref_cache *cache,
-			      struct backref_edge *edge)
+static void mark_block_processed(struct reloc_control *rc,
+				 struct btrfs_backref_node *node)
 {
-	if (edge) {
-		cache->nr_edges--;
-		kfree(edge);
-	}
-}
+	u32 blocksize;
 
-static struct rb_node *tree_insert(struct rb_root *root, u64 bytenr,
-				   struct rb_node *node)
-{
-	struct rb_node **p = &root->rb_node;
-	struct rb_node *parent = NULL;
-	struct tree_entry *entry;
-
-	while (*p) {
-		parent = *p;
-		entry = rb_entry(parent, struct tree_entry, rb_node);
-
-		if (bytenr < entry->bytenr)
-			p = &(*p)->rb_left;
-		else if (bytenr > entry->bytenr)
-			p = &(*p)->rb_right;
-		else
-			return parent;
+	if (node->level == 0 ||
+	    in_range(node->bytenr, rc->block_group->start,
+		     rc->block_group->length)) {
+		blocksize = rc->extent_root->fs_info->nodesize;
+		set_extent_bits(&rc->processed_blocks, node->bytenr,
+				node->bytenr + blocksize - 1, EXTENT_DIRTY);
 	}
-
-	rb_link_node(node, parent, p);
-	rb_insert_color(node, root);
-	return NULL;
+	node->processed = 1;
 }
 
-static struct rb_node *tree_search(struct rb_root *root, u64 bytenr)
-{
-	struct rb_node *n = root->rb_node;
-	struct tree_entry *entry;
-
-	while (n) {
-		entry = rb_entry(n, struct tree_entry, rb_node);
 
-		if (bytenr < entry->bytenr)
-			n = n->rb_left;
-		else if (bytenr > entry->bytenr)
-			n = n->rb_right;
-		else
-			return n;
-	}
-	return NULL;
-}
-
-static void backref_tree_panic(struct rb_node *rb_node, int errno, u64 bytenr)
+static void mapping_tree_init(struct mapping_tree *tree)
 {
-
-	struct btrfs_fs_info *fs_info = NULL;
-	struct backref_node *bnode = rb_entry(rb_node, struct backref_node,
-					      rb_node);
-	if (bnode->root)
-		fs_info = bnode->root->fs_info;
-	btrfs_panic(fs_info, errno,
-		    "Inconsistency in backref cache found at offset %llu",
-		    bytenr);
+	tree->rb_root = RB_ROOT;
+	spin_lock_init(&tree->lock);
 }
 
 /*
  * walk up backref nodes until reach node presents tree root
  */
-static struct backref_node *walk_up_backref(struct backref_node *node,
-					    struct backref_edge *edges[],
-					    int *index)
+static struct btrfs_backref_node *walk_up_backref(
+		struct btrfs_backref_node *node,
+		struct btrfs_backref_edge *edges[], int *index)
 {
-	struct backref_edge *edge;
+	struct btrfs_backref_edge *edge;
 	int idx = *index;
 
 	while (!list_empty(&node->upper)) {
 		edge = list_entry(node->upper.next,
-				  struct backref_edge, list[LOWER]);
+				  struct btrfs_backref_edge, list[LOWER]);
 		edges[idx++] = edge;
 		node = edge->node[UPPER];
 	}
@@ -408,11 +199,11 @@ static struct backref_node *walk_up_backref(struct backref_node *node,
 /*
  * walk down backref nodes to find start of next reference path
  */
-static struct backref_node *walk_down_backref(struct backref_edge *edges[],
-					      int *index)
+static struct btrfs_backref_node *walk_down_backref(
+		struct btrfs_backref_edge *edges[], int *index)
 {
-	struct backref_edge *edge;
-	struct backref_node *lower;
+	struct btrfs_backref_edge *edge;
+	struct btrfs_backref_node *lower;
 	int idx = *index;
 
 	while (idx > 0) {
@@ -423,7 +214,7 @@ static struct backref_node *walk_down_backref(struct backref_edge *edges[],
 			continue;
 		}
 		edge = list_entry(edge->list[LOWER].next,
-				  struct backref_edge, list[LOWER]);
+				  struct btrfs_backref_edge, list[LOWER]);
 		edges[idx - 1] = edge;
 		*index = idx;
 		return edge->node[UPPER];
@@ -432,95 +223,24 @@ static struct backref_node *walk_down_backref(struct backref_edge *edges[],
 	return NULL;
 }
 
-static void unlock_node_buffer(struct backref_node *node)
-{
-	if (node->locked) {
-		btrfs_tree_unlock(node->eb);
-		node->locked = 0;
-	}
-}
-
-static void drop_node_buffer(struct backref_node *node)
-{
-	if (node->eb) {
-		unlock_node_buffer(node);
-		free_extent_buffer(node->eb);
-		node->eb = NULL;
-	}
-}
-
-static void drop_backref_node(struct backref_cache *tree,
-			      struct backref_node *node)
-{
-	BUG_ON(!list_empty(&node->upper));
-
-	drop_node_buffer(node);
-	list_del(&node->list);
-	list_del(&node->lower);
-	if (!RB_EMPTY_NODE(&node->rb_node))
-		rb_erase(&node->rb_node, &tree->rb_root);
-	free_backref_node(tree, node);
-}
-
-/*
- * remove a backref node from the backref cache
- */
-static void remove_backref_node(struct backref_cache *cache,
-				struct backref_node *node)
-{
-	struct backref_node *upper;
-	struct backref_edge *edge;
-
-	if (!node)
-		return;
-
-	BUG_ON(!node->lowest && !node->detached);
-	while (!list_empty(&node->upper)) {
-		edge = list_entry(node->upper.next, struct backref_edge,
-				  list[LOWER]);
-		upper = edge->node[UPPER];
-		list_del(&edge->list[LOWER]);
-		list_del(&edge->list[UPPER]);
-		free_backref_edge(cache, edge);
-
-		if (RB_EMPTY_NODE(&upper->rb_node)) {
-			BUG_ON(!list_empty(&node->upper));
-			drop_backref_node(cache, node);
-			node = upper;
-			node->lowest = 1;
-			continue;
-		}
-		/*
-		 * add the node to leaf node list if no other
-		 * child block cached.
-		 */
-		if (list_empty(&upper->lower)) {
-			list_add_tail(&upper->lower, &cache->leaves);
-			upper->lowest = 1;
-		}
-	}
-
-	drop_backref_node(cache, node);
-}
-
-static void update_backref_node(struct backref_cache *cache,
-				struct backref_node *node, u64 bytenr)
+static void update_backref_node(struct btrfs_backref_cache *cache,
+				struct btrfs_backref_node *node, u64 bytenr)
 {
 	struct rb_node *rb_node;
 	rb_erase(&node->rb_node, &cache->rb_root);
 	node->bytenr = bytenr;
-	rb_node = tree_insert(&cache->rb_root, node->bytenr, &node->rb_node);
+	rb_node = rb_simple_insert(&cache->rb_root, node->bytenr, &node->rb_node);
 	if (rb_node)
-		backref_tree_panic(rb_node, -EEXIST, bytenr);
+		btrfs_backref_panic(cache->fs_info, bytenr, -EEXIST);
 }
 
 /*
  * update backref cache after a transaction commit
  */
 static int update_backref_cache(struct btrfs_trans_handle *trans,
-				struct backref_cache *cache)
+				struct btrfs_backref_cache *cache)
 {
-	struct backref_node *node;
+	struct btrfs_backref_node *node;
 	int level = 0;
 
 	if (cache->last_trans == 0) {
@@ -538,13 +258,13 @@ static int update_backref_cache(struct btrfs_trans_handle *trans,
 	 */
 	while (!list_empty(&cache->detached)) {
 		node = list_entry(cache->detached.next,
-				  struct backref_node, list);
-		remove_backref_node(cache, node);
+				  struct btrfs_backref_node, list);
+		btrfs_backref_cleanup_node(cache, node);
 	}
 
 	while (!list_empty(&cache->changed)) {
 		node = list_entry(cache->changed.next,
-				  struct backref_node, list);
+				  struct btrfs_backref_node, list);
 		list_del_init(&node->list);
 		BUG_ON(node->pending);
 		update_backref_node(cache, node, node->new_bytenr);
@@ -585,7 +305,8 @@ static bool reloc_root_is_dead(struct btrfs_root *root)
  *
  * Reloc tree after swap is considered dead, thus not considered as valid.
  * This is enough for most callers, as they don't distinguish dead reloc root
- * from no reloc root.  But should_ignore_root() below is a special case.
+ * from no reloc root.  But btrfs_should_ignore_reloc_root() below is a
+ * special case.
  */
 static bool have_reloc_root(struct btrfs_root *root)
 {
@@ -596,7 +317,7 @@ static bool have_reloc_root(struct btrfs_root *root)
 	return true;
 }
 
-static int should_ignore_root(struct btrfs_root *root)
+int btrfs_should_ignore_reloc_root(struct btrfs_root *root)
 {
 	struct btrfs_root *reloc_root;
 
@@ -622,18 +343,20 @@ static int should_ignore_root(struct btrfs_root *root)
 	 */
 	return 1;
 }
+
 /*
  * find reloc tree by address of tree root
  */
-static struct btrfs_root *find_reloc_root(struct reloc_control *rc,
-					  u64 bytenr)
+struct btrfs_root *find_reloc_root(struct btrfs_fs_info *fs_info, u64 bytenr)
 {
+	struct reloc_control *rc = fs_info->reloc_ctl;
 	struct rb_node *rb_node;
 	struct mapping_node *node;
 	struct btrfs_root *root = NULL;
 
+	ASSERT(rc);
 	spin_lock(&rc->reloc_root_tree.lock);
-	rb_node = tree_search(&rc->reloc_root_tree.rb_root, bytenr);
+	rb_node = rb_simple_search(&rc->reloc_root_tree.rb_root, bytenr);
 	if (rb_node) {
 		node = rb_entry(rb_node, struct mapping_node, rb_node);
 		root = (struct btrfs_root *)node->data;
@@ -654,582 +377,165 @@ static struct btrfs_root *read_fs_root(struct btrfs_fs_info *fs_info,
 	return btrfs_get_fs_root(fs_info, &key, false);
 }
 
-static noinline_for_stack
-int find_inline_backref(struct extent_buffer *leaf, int slot,
-			unsigned long *ptr, unsigned long *end)
+/*
+ * For useless nodes, do two major clean ups:
+ *
+ * - Cleanup the children edges and nodes
+ *   If child node is also orphan (no parent) during cleanup, then the child
+ *   node will also be cleaned up.
+ *
+ * - Freeing up leaves (level 0), keeps nodes detached
+ *   For nodes, the node is still cached as "detached"
+ *
+ * Return false if @node is not in the @useless_nodes list.
+ * Return true if @node is in the @useless_nodes list.
+ */
+static bool handle_useless_nodes(struct reloc_control *rc,
+				 struct btrfs_backref_node *node)
 {
-	struct btrfs_key key;
-	struct btrfs_extent_item *ei;
-	struct btrfs_tree_block_info *bi;
-	u32 item_size;
+	struct btrfs_backref_cache *cache = &rc->backref_cache;
+	struct list_head *useless_node = &cache->useless_node;
+	bool ret = false;
 
-	btrfs_item_key_to_cpu(leaf, &key, slot);
+	while (!list_empty(useless_node)) {
+		struct btrfs_backref_node *cur;
 
-	item_size = btrfs_item_size_nr(leaf, slot);
-	if (item_size < sizeof(*ei)) {
-		btrfs_print_v0_err(leaf->fs_info);
-		btrfs_handle_fs_error(leaf->fs_info, -EINVAL, NULL);
-		return 1;
-	}
-	ei = btrfs_item_ptr(leaf, slot, struct btrfs_extent_item);
-	WARN_ON(!(btrfs_extent_flags(leaf, ei) &
-		  BTRFS_EXTENT_FLAG_TREE_BLOCK));
+		cur = list_first_entry(useless_node, struct btrfs_backref_node,
+				 list);
+		list_del_init(&cur->list);
 
-	if (key.type == BTRFS_EXTENT_ITEM_KEY &&
-	    item_size <= sizeof(*ei) + sizeof(*bi)) {
-		WARN_ON(item_size < sizeof(*ei) + sizeof(*bi));
-		return 1;
-	}
-	if (key.type == BTRFS_METADATA_ITEM_KEY &&
-	    item_size <= sizeof(*ei)) {
-		WARN_ON(item_size < sizeof(*ei));
-		return 1;
-	}
+		/* Only tree root nodes can be added to @useless_nodes */
+		ASSERT(list_empty(&cur->upper));
 
-	if (key.type == BTRFS_EXTENT_ITEM_KEY) {
-		bi = (struct btrfs_tree_block_info *)(ei + 1);
-		*ptr = (unsigned long)(bi + 1);
-	} else {
-		*ptr = (unsigned long)(ei + 1);
+		if (cur == node)
+			ret = true;
+
+		/* The node is the lowest node */
+		if (cur->lowest) {
+			list_del_init(&cur->lower);
+			cur->lowest = 0;
+		}
+
+		/* Cleanup the lower edges */
+		while (!list_empty(&cur->lower)) {
+			struct btrfs_backref_edge *edge;
+			struct btrfs_backref_node *lower;
+
+			edge = list_entry(cur->lower.next,
+					struct btrfs_backref_edge, list[UPPER]);
+			list_del(&edge->list[UPPER]);
+			list_del(&edge->list[LOWER]);
+			lower = edge->node[LOWER];
+			btrfs_backref_free_edge(cache, edge);
+
+			/* Child node is also orphan, queue for cleanup */
+			if (list_empty(&lower->upper))
+				list_add(&lower->list, useless_node);
+		}
+		/* Mark this block processed for relocation */
+		mark_block_processed(rc, cur);
+
+		/*
+		 * Backref nodes for tree leaves are deleted from the cache.
+		 * Backref nodes for upper level tree blocks are left in the
+		 * cache to avoid unnecessary backref lookup.
+		 */
+		if (cur->level > 0) {
+			list_add(&cur->list, &cache->detached);
+			cur->detached = 1;
+		} else {
+			rb_erase(&cur->rb_node, &cache->rb_root);
+			btrfs_backref_free_node(cache, cur);
+		}
 	}
-	*end = (unsigned long)ei + item_size;
-	return 0;
+	return ret;
 }
 
 /*
- * build backref tree for a given tree block. root of the backref tree
- * corresponds the tree block, leaves of the backref tree correspond
- * roots of b-trees that reference the tree block.
+ * Build backref tree for a given tree block. Root of the backref tree
+ * corresponds the tree block, leaves of the backref tree correspond roots of
+ * b-trees that reference the tree block.
  *
- * the basic idea of this function is check backrefs of a given block
- * to find upper level blocks that reference the block, and then check
- * backrefs of these upper level blocks recursively. the recursion stop
- * when tree root is reached or backrefs for the block is cached.
+ * The basic idea of this function is check backrefs of a given block to find
+ * upper level blocks that reference the block, and then check backrefs of
+ * these upper level blocks recursively. The recursion stops when tree root is
+ * reached or backrefs for the block is cached.
  *
- * NOTE: if we find backrefs for a block are cached, we know backrefs
- * for all upper level blocks that directly/indirectly reference the
- * block are also cached.
+ * NOTE: if we find that backrefs for a block are cached, we know backrefs for
+ * all upper level blocks that directly/indirectly reference the block are also
+ * cached.
  */
-static noinline_for_stack
-struct backref_node *build_backref_tree(struct reloc_control *rc,
-					struct btrfs_key *node_key,
-					int level, u64 bytenr)
+static noinline_for_stack struct btrfs_backref_node *build_backref_tree(
+			struct reloc_control *rc, struct btrfs_key *node_key,
+			int level, u64 bytenr)
 {
-	struct backref_cache *cache = &rc->backref_cache;
-	struct btrfs_path *path1; /* For searching extent root */
-	struct btrfs_path *path2; /* For searching parent of TREE_BLOCK_REF */
-	struct extent_buffer *eb;
-	struct btrfs_root *root;
-	struct backref_node *cur;
-	struct backref_node *upper;
-	struct backref_node *lower;
-	struct backref_node *node = NULL;
-	struct backref_node *exist = NULL;
-	struct backref_edge *edge;
-	struct rb_node *rb_node;
-	struct btrfs_key key;
-	unsigned long end;
-	unsigned long ptr;
-	LIST_HEAD(list); /* Pending edge list, upper node needs to be checked */
-	LIST_HEAD(useless);
-	int cowonly;
+	struct btrfs_backref_iter *iter;
+	struct btrfs_backref_cache *cache = &rc->backref_cache;
+	/* For searching parent of TREE_BLOCK_REF */
+	struct btrfs_path *path;
+	struct btrfs_backref_node *cur;
+	struct btrfs_backref_node *node = NULL;
+	struct btrfs_backref_edge *edge;
 	int ret;
 	int err = 0;
-	bool need_check = true;
 
-	path1 = btrfs_alloc_path();
-	path2 = btrfs_alloc_path();
-	if (!path1 || !path2) {
+	iter = btrfs_backref_iter_alloc(rc->extent_root->fs_info, GFP_NOFS);
+	if (!iter)
+		return ERR_PTR(-ENOMEM);
+	path = btrfs_alloc_path();
+	if (!path) {
 		err = -ENOMEM;
 		goto out;
 	}
 
-	node = alloc_backref_node(cache);
+	node = btrfs_backref_alloc_node(cache, bytenr, level);
 	if (!node) {
 		err = -ENOMEM;
 		goto out;
 	}
 
-	node->bytenr = bytenr;
-	node->level = level;
 	node->lowest = 1;
 	cur = node;
-again:
-	end = 0;
-	ptr = 0;
-	key.objectid = cur->bytenr;
-	key.type = BTRFS_METADATA_ITEM_KEY;
-	key.offset = (u64)-1;
-
-	path1->search_commit_root = 1;
-	path1->skip_locking = 1;
-	ret = btrfs_search_slot(NULL, rc->extent_root, &key, path1,
-				0, 0);
-	if (ret < 0) {
-		err = ret;
-		goto out;
-	}
-	ASSERT(ret);
-	ASSERT(path1->slots[0]);
-
-	path1->slots[0]--;
-
-	WARN_ON(cur->checked);
-	if (!list_empty(&cur->upper)) {
-		/*
-		 * the backref was added previously when processing
-		 * backref of type BTRFS_TREE_BLOCK_REF_KEY
-		 */
-		ASSERT(list_is_singular(&cur->upper));
-		edge = list_entry(cur->upper.next, struct backref_edge,
-				  list[LOWER]);
-		ASSERT(list_empty(&edge->list[UPPER]));
-		exist = edge->node[UPPER];
-		/*
-		 * add the upper level block to pending list if we need
-		 * check its backrefs
-		 */
-		if (!exist->checked)
-			list_add_tail(&edge->list[UPPER], &list);
-	} else {
-		exist = NULL;
-	}
-
-	while (1) {
-		cond_resched();
-		eb = path1->nodes[0];
-
-		if (ptr >= end) {
-			if (path1->slots[0] >= btrfs_header_nritems(eb)) {
-				ret = btrfs_next_leaf(rc->extent_root, path1);
-				if (ret < 0) {
-					err = ret;
-					goto out;
-				}
-				if (ret > 0)
-					break;
-				eb = path1->nodes[0];
-			}
-
-			btrfs_item_key_to_cpu(eb, &key, path1->slots[0]);
-			if (key.objectid != cur->bytenr) {
-				WARN_ON(exist);
-				break;
-			}
-
-			if (key.type == BTRFS_EXTENT_ITEM_KEY ||
-			    key.type == BTRFS_METADATA_ITEM_KEY) {
-				ret = find_inline_backref(eb, path1->slots[0],
-							  &ptr, &end);
-				if (ret)
-					goto next;
-			}
-		}
-
-		if (ptr < end) {
-			/* update key for inline back ref */
-			struct btrfs_extent_inline_ref *iref;
-			int type;
-			iref = (struct btrfs_extent_inline_ref *)ptr;
-			type = btrfs_get_extent_inline_ref_type(eb, iref,
-							BTRFS_REF_TYPE_BLOCK);
-			if (type == BTRFS_REF_TYPE_INVALID) {
-				err = -EUCLEAN;
-				goto out;
-			}
-			key.type = type;
-			key.offset = btrfs_extent_inline_ref_offset(eb, iref);
-
-			WARN_ON(key.type != BTRFS_TREE_BLOCK_REF_KEY &&
-				key.type != BTRFS_SHARED_BLOCK_REF_KEY);
-		}
-
-		/*
-		 * Parent node found and matches current inline ref, no need to
-		 * rebuild this node for this inline ref.
-		 */
-		if (exist &&
-		    ((key.type == BTRFS_TREE_BLOCK_REF_KEY &&
-		      exist->owner == key.offset) ||
-		     (key.type == BTRFS_SHARED_BLOCK_REF_KEY &&
-		      exist->bytenr == key.offset))) {
-			exist = NULL;
-			goto next;
-		}
-
-		/* SHARED_BLOCK_REF means key.offset is the parent bytenr */
-		if (key.type == BTRFS_SHARED_BLOCK_REF_KEY) {
-			if (key.objectid == key.offset) {
-				/*
-				 * Only root blocks of reloc trees use backref
-				 * pointing to itself.
-				 */
-				root = find_reloc_root(rc, cur->bytenr);
-				ASSERT(root);
-				cur->root = root;
-				break;
-			}
-
-			edge = alloc_backref_edge(cache);
-			if (!edge) {
-				err = -ENOMEM;
-				goto out;
-			}
-			rb_node = tree_search(&cache->rb_root, key.offset);
-			if (!rb_node) {
-				upper = alloc_backref_node(cache);
-				if (!upper) {
-					free_backref_edge(cache, edge);
-					err = -ENOMEM;
-					goto out;
-				}
-				upper->bytenr = key.offset;
-				upper->level = cur->level + 1;
-				/*
-				 *  backrefs for the upper level block isn't
-				 *  cached, add the block to pending list
-				 */
-				list_add_tail(&edge->list[UPPER], &list);
-			} else {
-				upper = rb_entry(rb_node, struct backref_node,
-						 rb_node);
-				ASSERT(upper->checked);
-				INIT_LIST_HEAD(&edge->list[UPPER]);
-			}
-			list_add_tail(&edge->list[LOWER], &cur->upper);
-			edge->node[LOWER] = cur;
-			edge->node[UPPER] = upper;
-
-			goto next;
-		} else if (unlikely(key.type == BTRFS_EXTENT_REF_V0_KEY)) {
-			err = -EINVAL;
-			btrfs_print_v0_err(rc->extent_root->fs_info);
-			btrfs_handle_fs_error(rc->extent_root->fs_info, err,
-					      NULL);
-			goto out;
-		} else if (key.type != BTRFS_TREE_BLOCK_REF_KEY) {
-			goto next;
-		}
 
-		/*
-		 * key.type == BTRFS_TREE_BLOCK_REF_KEY, inline ref offset
-		 * means the root objectid. We need to search the tree to get
-		 * its parent bytenr.
-		 */
-		root = read_fs_root(rc->extent_root->fs_info, key.offset);
-		if (IS_ERR(root)) {
-			err = PTR_ERR(root);
-			goto out;
-		}
-
-		if (!test_bit(BTRFS_ROOT_REF_COWS, &root->state))
-			cur->cowonly = 1;
-
-		if (btrfs_root_level(&root->root_item) == cur->level) {
-			/* tree root */
-			ASSERT(btrfs_root_bytenr(&root->root_item) ==
-			       cur->bytenr);
-			if (should_ignore_root(root)) {
-				btrfs_put_root(root);
-				list_add(&cur->list, &useless);
-			} else {
-				cur->root = root;
-			}
-			break;
-		}
-
-		level = cur->level + 1;
-
-		/* Search the tree to find parent blocks referring the block. */
-		path2->search_commit_root = 1;
-		path2->skip_locking = 1;
-		path2->lowest_level = level;
-		ret = btrfs_search_slot(NULL, root, node_key, path2, 0, 0);
-		path2->lowest_level = 0;
+	/* Breadth-first search to build backref cache */
+	do {
+		ret = btrfs_backref_add_tree_node(cache, path, iter, node_key,
+						  cur);
 		if (ret < 0) {
-			btrfs_put_root(root);
 			err = ret;
 			goto out;
 		}
-		if (ret > 0 && path2->slots[level] > 0)
-			path2->slots[level]--;
-
-		eb = path2->nodes[level];
-		if (btrfs_node_blockptr(eb, path2->slots[level]) !=
-		    cur->bytenr) {
-			btrfs_err(root->fs_info,
-	"couldn't find block (%llu) (level %d) in tree (%llu) with key (%llu %u %llu)",
-				  cur->bytenr, level - 1,
-				  root->root_key.objectid,
-				  node_key->objectid, node_key->type,
-				  node_key->offset);
-			btrfs_put_root(root);
-			err = -ENOENT;
-			goto out;
-		}
-		lower = cur;
-		need_check = true;
-
-		/* Add all nodes and edges in the path */
-		for (; level < BTRFS_MAX_LEVEL; level++) {
-			if (!path2->nodes[level]) {
-				ASSERT(btrfs_root_bytenr(&root->root_item) ==
-				       lower->bytenr);
-				if (should_ignore_root(root)) {
-					btrfs_put_root(root);
-					list_add(&lower->list, &useless);
-				} else {
-					lower->root = root;
-				}
-				break;
-			}
-
-			edge = alloc_backref_edge(cache);
-			if (!edge) {
-				btrfs_put_root(root);
-				err = -ENOMEM;
-				goto out;
-			}
-
-			eb = path2->nodes[level];
-			rb_node = tree_search(&cache->rb_root, eb->start);
-			if (!rb_node) {
-				upper = alloc_backref_node(cache);
-				if (!upper) {
-					btrfs_put_root(root);
-					free_backref_edge(cache, edge);
-					err = -ENOMEM;
-					goto out;
-				}
-				upper->bytenr = eb->start;
-				upper->owner = btrfs_header_owner(eb);
-				upper->level = lower->level + 1;
-				if (!test_bit(BTRFS_ROOT_REF_COWS,
-					      &root->state))
-					upper->cowonly = 1;
-
-				/*
-				 * if we know the block isn't shared
-				 * we can void checking its backrefs.
-				 */
-				if (btrfs_block_can_be_shared(root, eb))
-					upper->checked = 0;
-				else
-					upper->checked = 1;
-
-				/*
-				 * add the block to pending list if we
-				 * need check its backrefs, we only do this once
-				 * while walking up a tree as we will catch
-				 * anything else later on.
-				 */
-				if (!upper->checked && need_check) {
-					need_check = false;
-					list_add_tail(&edge->list[UPPER],
-						      &list);
-				} else {
-					if (upper->checked)
-						need_check = true;
-					INIT_LIST_HEAD(&edge->list[UPPER]);
-				}
-			} else {
-				upper = rb_entry(rb_node, struct backref_node,
-						 rb_node);
-				ASSERT(upper->checked);
-				INIT_LIST_HEAD(&edge->list[UPPER]);
-				if (!upper->owner)
-					upper->owner = btrfs_header_owner(eb);
-			}
-			list_add_tail(&edge->list[LOWER], &lower->upper);
-			edge->node[LOWER] = lower;
-			edge->node[UPPER] = upper;
-
-			if (rb_node) {
-				btrfs_put_root(root);
-				break;
-			}
-			lower = upper;
-			upper = NULL;
-		}
-		btrfs_release_path(path2);
-next:
-		if (ptr < end) {
-			ptr += btrfs_extent_inline_ref_size(key.type);
-			if (ptr >= end) {
-				WARN_ON(ptr > end);
-				ptr = 0;
-				end = 0;
-			}
-		}
-		if (ptr >= end)
-			path1->slots[0]++;
-	}
-	btrfs_release_path(path1);
-
-	cur->checked = 1;
-	WARN_ON(exist);
-
-	/* the pending list isn't empty, take the first block to process */
-	if (!list_empty(&list)) {
-		edge = list_entry(list.next, struct backref_edge, list[UPPER]);
-		list_del_init(&edge->list[UPPER]);
-		cur = edge->node[UPPER];
-		goto again;
-	}
-
-	/*
-	 * everything goes well, connect backref nodes and insert backref nodes
-	 * into the cache.
-	 */
-	ASSERT(node->checked);
-	cowonly = node->cowonly;
-	if (!cowonly) {
-		rb_node = tree_insert(&cache->rb_root, node->bytenr,
-				      &node->rb_node);
-		if (rb_node)
-			backref_tree_panic(rb_node, -EEXIST, node->bytenr);
-		list_add_tail(&node->lower, &cache->leaves);
-	}
-
-	list_for_each_entry(edge, &node->upper, list[LOWER])
-		list_add_tail(&edge->list[UPPER], &list);
-
-	while (!list_empty(&list)) {
-		edge = list_entry(list.next, struct backref_edge, list[UPPER]);
-		list_del_init(&edge->list[UPPER]);
-		upper = edge->node[UPPER];
-		if (upper->detached) {
-			list_del(&edge->list[LOWER]);
-			lower = edge->node[LOWER];
-			free_backref_edge(cache, edge);
-			if (list_empty(&lower->upper))
-				list_add(&lower->list, &useless);
-			continue;
-		}
-
-		if (!RB_EMPTY_NODE(&upper->rb_node)) {
-			if (upper->lowest) {
-				list_del_init(&upper->lower);
-				upper->lowest = 0;
-			}
-
-			list_add_tail(&edge->list[UPPER], &upper->lower);
-			continue;
-		}
-
-		if (!upper->checked) {
-			/*
-			 * Still want to blow up for developers since this is a
-			 * logic bug.
-			 */
-			ASSERT(0);
-			err = -EINVAL;
-			goto out;
-		}
-		if (cowonly != upper->cowonly) {
-			ASSERT(0);
-			err = -EINVAL;
-			goto out;
-		}
-
-		if (!cowonly) {
-			rb_node = tree_insert(&cache->rb_root, upper->bytenr,
-					      &upper->rb_node);
-			if (rb_node)
-				backref_tree_panic(rb_node, -EEXIST,
-						   upper->bytenr);
+		edge = list_first_entry_or_null(&cache->pending_edge,
+				struct btrfs_backref_edge, list[UPPER]);
+		/*
+		 * The pending list isn't empty, take the first block to
+		 * process
+		 */
+		if (edge) {
+			list_del_init(&edge->list[UPPER]);
+			cur = edge->node[UPPER];
 		}
+	} while (edge);
 
-		list_add_tail(&edge->list[UPPER], &upper->lower);
-
-		list_for_each_entry(edge, &upper->upper, list[LOWER])
-			list_add_tail(&edge->list[UPPER], &list);
+	/* Finish the upper linkage of newly added edges/nodes */
+	ret = btrfs_backref_finish_upper_links(cache, node);
+	if (ret < 0) {
+		err = ret;
+		goto out;
 	}
-	/*
-	 * process useless backref nodes. backref nodes for tree leaves
-	 * are deleted from the cache. backref nodes for upper level
-	 * tree blocks are left in the cache to avoid unnecessary backref
-	 * lookup.
-	 */
-	while (!list_empty(&useless)) {
-		upper = list_entry(useless.next, struct backref_node, list);
-		list_del_init(&upper->list);
-		ASSERT(list_empty(&upper->upper));
-		if (upper == node)
-			node = NULL;
-		if (upper->lowest) {
-			list_del_init(&upper->lower);
-			upper->lowest = 0;
-		}
-		while (!list_empty(&upper->lower)) {
-			edge = list_entry(upper->lower.next,
-					  struct backref_edge, list[UPPER]);
-			list_del(&edge->list[UPPER]);
-			list_del(&edge->list[LOWER]);
-			lower = edge->node[LOWER];
-			free_backref_edge(cache, edge);
 
-			if (list_empty(&lower->upper))
-				list_add(&lower->list, &useless);
-		}
-		__mark_block_processed(rc, upper);
-		if (upper->level > 0) {
-			list_add(&upper->list, &cache->detached);
-			upper->detached = 1;
-		} else {
-			rb_erase(&upper->rb_node, &cache->rb_root);
-			free_backref_node(cache, upper);
-		}
-	}
+	if (handle_useless_nodes(rc, node))
+		node = NULL;
 out:
-	btrfs_free_path(path1);
-	btrfs_free_path(path2);
+	btrfs_backref_iter_free(iter);
+	btrfs_free_path(path);
 	if (err) {
-		while (!list_empty(&useless)) {
-			lower = list_entry(useless.next,
-					   struct backref_node, list);
-			list_del_init(&lower->list);
-		}
-		while (!list_empty(&list)) {
-			edge = list_first_entry(&list, struct backref_edge,
-						list[UPPER]);
-			list_del(&edge->list[UPPER]);
-			list_del(&edge->list[LOWER]);
-			lower = edge->node[LOWER];
-			upper = edge->node[UPPER];
-			free_backref_edge(cache, edge);
-
-			/*
-			 * Lower is no longer linked to any upper backref nodes
-			 * and isn't in the cache, we can free it ourselves.
-			 */
-			if (list_empty(&lower->upper) &&
-			    RB_EMPTY_NODE(&lower->rb_node))
-				list_add(&lower->list, &useless);
-
-			if (!RB_EMPTY_NODE(&upper->rb_node))
-				continue;
-
-			/* Add this guy's upper edges to the list to process */
-			list_for_each_entry(edge, &upper->upper, list[LOWER])
-				list_add_tail(&edge->list[UPPER], &list);
-			if (list_empty(&upper->upper))
-				list_add(&upper->list, &useless);
-		}
-
-		while (!list_empty(&useless)) {
-			lower = list_entry(useless.next,
-					   struct backref_node, list);
-			list_del_init(&lower->list);
-			if (lower == node)
-				node = NULL;
-			free_backref_node(cache, lower);
-		}
-
-		remove_backref_node(cache, node);
+		btrfs_backref_error_cleanup(cache, node);
 		return ERR_PTR(err);
 	}
 	ASSERT(!node || !node->detached);
+	ASSERT(list_empty(&cache->useless_node) &&
+	       list_empty(&cache->pending_edge));
 	return node;
 }
 
@@ -1244,19 +550,19 @@ static int clone_backref_node(struct btrfs_trans_handle *trans,
 			      struct btrfs_root *dest)
 {
 	struct btrfs_root *reloc_root = src->reloc_root;
-	struct backref_cache *cache = &rc->backref_cache;
-	struct backref_node *node = NULL;
-	struct backref_node *new_node;
-	struct backref_edge *edge;
-	struct backref_edge *new_edge;
+	struct btrfs_backref_cache *cache = &rc->backref_cache;
+	struct btrfs_backref_node *node = NULL;
+	struct btrfs_backref_node *new_node;
+	struct btrfs_backref_edge *edge;
+	struct btrfs_backref_edge *new_edge;
 	struct rb_node *rb_node;
 
 	if (cache->last_trans > 0)
 		update_backref_cache(trans, cache);
 
-	rb_node = tree_search(&cache->rb_root, src->commit_root->start);
+	rb_node = rb_simple_search(&cache->rb_root, src->commit_root->start);
 	if (rb_node) {
-		node = rb_entry(rb_node, struct backref_node, rb_node);
+		node = rb_entry(rb_node, struct btrfs_backref_node, rb_node);
 		if (node->detached)
 			node = NULL;
 		else
@@ -1264,10 +570,10 @@ static int clone_backref_node(struct btrfs_trans_handle *trans,
 	}
 
 	if (!node) {
-		rb_node = tree_search(&cache->rb_root,
-				      reloc_root->commit_root->start);
+		rb_node = rb_simple_search(&cache->rb_root,
+					   reloc_root->commit_root->start);
 		if (rb_node) {
-			node = rb_entry(rb_node, struct backref_node,
+			node = rb_entry(rb_node, struct btrfs_backref_node,
 					rb_node);
 			BUG_ON(node->detached);
 		}
@@ -1276,12 +582,11 @@ static int clone_backref_node(struct btrfs_trans_handle *trans,
 	if (!node)
 		return 0;
 
-	new_node = alloc_backref_node(cache);
+	new_node = btrfs_backref_alloc_node(cache, dest->node->start,
+					    node->level);
 	if (!new_node)
 		return -ENOMEM;
 
-	new_node->bytenr = dest->node->start;
-	new_node->level = node->level;
 	new_node->lowest = node->lowest;
 	new_node->checked = 1;
 	new_node->root = btrfs_grab_root(dest);
@@ -1289,23 +594,21 @@ static int clone_backref_node(struct btrfs_trans_handle *trans,
 
 	if (!node->lowest) {
 		list_for_each_entry(edge, &node->lower, list[UPPER]) {
-			new_edge = alloc_backref_edge(cache);
+			new_edge = btrfs_backref_alloc_edge(cache);
 			if (!new_edge)
 				goto fail;
 
-			new_edge->node[UPPER] = new_node;
-			new_edge->node[LOWER] = edge->node[LOWER];
-			list_add_tail(&new_edge->list[UPPER],
-				      &new_node->lower);
+			btrfs_backref_link_edge(new_edge, edge->node[LOWER],
+						new_node, LINK_UPPER);
 		}
 	} else {
 		list_add_tail(&new_node->lower, &cache->leaves);
 	}
 
-	rb_node = tree_insert(&cache->rb_root, new_node->bytenr,
-			      &new_node->rb_node);
+	rb_node = rb_simple_insert(&cache->rb_root, new_node->bytenr,
+				   &new_node->rb_node);
 	if (rb_node)
-		backref_tree_panic(rb_node, -EEXIST, new_node->bytenr);
+		btrfs_backref_panic(trans->fs_info, new_node->bytenr, -EEXIST);
 
 	if (!new_node->lowest) {
 		list_for_each_entry(new_edge, &new_node->lower, list[UPPER]) {
@@ -1317,11 +620,11 @@ static int clone_backref_node(struct btrfs_trans_handle *trans,
 fail:
 	while (!list_empty(&new_node->lower)) {
 		new_edge = list_entry(new_node->lower.next,
-				      struct backref_edge, list[UPPER]);
+				      struct btrfs_backref_edge, list[UPPER]);
 		list_del(&new_edge->list[UPPER]);
-		free_backref_edge(cache, new_edge);
+		btrfs_backref_free_edge(cache, new_edge);
 	}
-	free_backref_node(cache, new_node);
+	btrfs_backref_free_node(cache, new_node);
 	return -ENOMEM;
 }
 
@@ -1343,8 +646,8 @@ static int __must_check __add_reloc_root(struct btrfs_root *root)
 	node->data = root;
 
 	spin_lock(&rc->reloc_root_tree.lock);
-	rb_node = tree_insert(&rc->reloc_root_tree.rb_root,
-			      node->bytenr, &node->rb_node);
+	rb_node = rb_simple_insert(&rc->reloc_root_tree.rb_root,
+				   node->bytenr, &node->rb_node);
 	spin_unlock(&rc->reloc_root_tree.lock);
 	if (rb_node) {
 		btrfs_panic(fs_info, -EEXIST,
@@ -1370,8 +673,8 @@ static void __del_reloc_root(struct btrfs_root *root)
 
 	if (rc && root->node) {
 		spin_lock(&rc->reloc_root_tree.lock);
-		rb_node = tree_search(&rc->reloc_root_tree.rb_root,
-				      root->commit_root->start);
+		rb_node = rb_simple_search(&rc->reloc_root_tree.rb_root,
+					   root->commit_root->start);
 		if (rb_node) {
 			node = rb_entry(rb_node, struct mapping_node, rb_node);
 			rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root);
@@ -1414,8 +717,8 @@ static int __update_reloc_root(struct btrfs_root *root)
 	struct reloc_control *rc = fs_info->reloc_ctl;
 
 	spin_lock(&rc->reloc_root_tree.lock);
-	rb_node = tree_search(&rc->reloc_root_tree.rb_root,
-			      root->commit_root->start);
+	rb_node = rb_simple_search(&rc->reloc_root_tree.rb_root,
+				   root->commit_root->start);
 	if (rb_node) {
 		node = rb_entry(rb_node, struct mapping_node, rb_node);
 		rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root);
@@ -1428,11 +731,11 @@ static int __update_reloc_root(struct btrfs_root *root)
 
 	spin_lock(&rc->reloc_root_tree.lock);
 	node->bytenr = root->node->start;
-	rb_node = tree_insert(&rc->reloc_root_tree.rb_root,
-			      node->bytenr, &node->rb_node);
+	rb_node = rb_simple_insert(&rc->reloc_root_tree.rb_root,
+				   node->bytenr, &node->rb_node);
 	spin_unlock(&rc->reloc_root_tree.lock);
 	if (rb_node)
-		backref_tree_panic(rb_node, -EEXIST, node->bytenr);
+		btrfs_backref_panic(fs_info, node->bytenr, -EEXIST);
 	return 0;
 }
 
@@ -1679,14 +982,6 @@ static struct inode *find_next_inode(struct btrfs_root *root, u64 objectid)
 	return NULL;
 }
 
-static int in_block_group(u64 bytenr, struct btrfs_block_group *block_group)
-{
-	if (bytenr >= block_group->start &&
-	    bytenr < block_group->start + block_group->length)
-		return 1;
-	return 0;
-}
-
 /*
  * get new location of data
  */
@@ -1784,7 +1079,8 @@ int replace_file_extents(struct btrfs_trans_handle *trans,
 		num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
 		if (bytenr == 0)
 			continue;
-		if (!in_block_group(bytenr, rc->block_group))
+		if (!in_range(bytenr, rc->block_group->start,
+			      rc->block_group->length))
 			continue;
 
 		/*
@@ -1940,7 +1236,7 @@ int replace_path(struct btrfs_trans_handle *trans, struct reloc_control *rc,
 		level = btrfs_header_level(parent);
 		BUG_ON(level < lowest_level);
 
-		ret = btrfs_bin_search(parent, &key, level, &slot);
+		ret = btrfs_bin_search(parent, &key, &slot);
 		if (ret < 0)
 			break;
 		if (ret && slot > 0)
@@ -2588,13 +1884,10 @@ int prepare_to_merge(struct reloc_control *rc, int err)
 static noinline_for_stack
 void free_reloc_roots(struct list_head *list)
 {
-	struct btrfs_root *reloc_root;
+	struct btrfs_root *reloc_root, *tmp;
 
-	while (!list_empty(list)) {
-		reloc_root = list_entry(list->next, struct btrfs_root,
-					root_list);
+	list_for_each_entry_safe(reloc_root, tmp, list, root_list)
 		__del_reloc_root(reloc_root);
-	}
 }
 
 static noinline_for_stack
@@ -2653,15 +1946,13 @@ void merge_reloc_roots(struct reloc_control *rc)
 out:
 	if (ret) {
 		btrfs_handle_fs_error(fs_info, ret, NULL);
-		if (!list_empty(&reloc_roots))
-			free_reloc_roots(&reloc_roots);
+		free_reloc_roots(&reloc_roots);
 
 		/* new reloc root may be added */
 		mutex_lock(&fs_info->reloc_mutex);
 		list_splice_init(&rc->reloc_roots, &reloc_roots);
 		mutex_unlock(&fs_info->reloc_mutex);
-		if (!list_empty(&reloc_roots))
-			free_reloc_roots(&reloc_roots);
+		free_reloc_roots(&reloc_roots);
 	}
 
 	/*
@@ -2714,10 +2005,10 @@ static int record_reloc_root_in_trans(struct btrfs_trans_handle *trans,
 static noinline_for_stack
 struct btrfs_root *select_reloc_root(struct btrfs_trans_handle *trans,
 				     struct reloc_control *rc,
-				     struct backref_node *node,
-				     struct backref_edge *edges[])
+				     struct btrfs_backref_node *node,
+				     struct btrfs_backref_edge *edges[])
 {
-	struct backref_node *next;
+	struct btrfs_backref_node *next;
 	struct btrfs_root *root;
 	int index = 0;
 
@@ -2746,7 +2037,7 @@ struct btrfs_root *select_reloc_root(struct btrfs_trans_handle *trans,
 			ASSERT(next->root);
 			list_add_tail(&next->list,
 				      &rc->backref_cache.changed);
-			__mark_block_processed(rc, next);
+			mark_block_processed(rc, next);
 			break;
 		}
 
@@ -2777,12 +2068,12 @@ struct btrfs_root *select_reloc_root(struct btrfs_trans_handle *trans,
  * counted. return -ENOENT if the block is root of reloc tree.
  */
 static noinline_for_stack
-struct btrfs_root *select_one_root(struct backref_node *node)
+struct btrfs_root *select_one_root(struct btrfs_backref_node *node)
 {
-	struct backref_node *next;
+	struct btrfs_backref_node *next;
 	struct btrfs_root *root;
 	struct btrfs_root *fs_root = NULL;
-	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	struct btrfs_backref_edge *edges[BTRFS_MAX_LEVEL - 1];
 	int index = 0;
 
 	next = node;
@@ -2814,12 +2105,12 @@ struct btrfs_root *select_one_root(struct backref_node *node)
 
 static noinline_for_stack
 u64 calcu_metadata_size(struct reloc_control *rc,
-			struct backref_node *node, int reserve)
+			struct btrfs_backref_node *node, int reserve)
 {
 	struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
-	struct backref_node *next = node;
-	struct backref_edge *edge;
-	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	struct btrfs_backref_node *next = node;
+	struct btrfs_backref_edge *edge;
+	struct btrfs_backref_edge *edges[BTRFS_MAX_LEVEL - 1];
 	u64 num_bytes = 0;
 	int index = 0;
 
@@ -2837,7 +2128,7 @@ u64 calcu_metadata_size(struct reloc_control *rc,
 				break;
 
 			edge = list_entry(next->upper.next,
-					  struct backref_edge, list[LOWER]);
+					struct btrfs_backref_edge, list[LOWER]);
 			edges[index++] = edge;
 			next = edge->node[UPPER];
 		}
@@ -2848,7 +2139,7 @@ u64 calcu_metadata_size(struct reloc_control *rc,
 
 static int reserve_metadata_space(struct btrfs_trans_handle *trans,
 				  struct reloc_control *rc,
-				  struct backref_node *node)
+				  struct btrfs_backref_node *node)
 {
 	struct btrfs_root *root = rc->extent_root;
 	struct btrfs_fs_info *fs_info = root->fs_info;
@@ -2896,14 +2187,14 @@ static int reserve_metadata_space(struct btrfs_trans_handle *trans,
  */
 static int do_relocation(struct btrfs_trans_handle *trans,
 			 struct reloc_control *rc,
-			 struct backref_node *node,
+			 struct btrfs_backref_node *node,
 			 struct btrfs_key *key,
 			 struct btrfs_path *path, int lowest)
 {
 	struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
-	struct backref_node *upper;
-	struct backref_edge *edge;
-	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	struct btrfs_backref_node *upper;
+	struct btrfs_backref_edge *edge;
+	struct btrfs_backref_edge *edges[BTRFS_MAX_LEVEL - 1];
 	struct btrfs_root *root;
 	struct extent_buffer *eb;
 	u32 blocksize;
@@ -2929,8 +2220,7 @@ static int do_relocation(struct btrfs_trans_handle *trans,
 
 		if (upper->eb && !upper->locked) {
 			if (!lowest) {
-				ret = btrfs_bin_search(upper->eb, key,
-						       upper->level, &slot);
+				ret = btrfs_bin_search(upper->eb, key, &slot);
 				if (ret < 0) {
 					err = ret;
 					goto next;
@@ -2940,7 +2230,7 @@ static int do_relocation(struct btrfs_trans_handle *trans,
 				if (node->eb->start == bytenr)
 					goto next;
 			}
-			drop_node_buffer(upper);
+			btrfs_backref_drop_node_buffer(upper);
 		}
 
 		if (!upper->eb) {
@@ -2968,8 +2258,7 @@ static int do_relocation(struct btrfs_trans_handle *trans,
 			slot = path->slots[upper->level];
 			btrfs_release_path(path);
 		} else {
-			ret = btrfs_bin_search(upper->eb, key, upper->level,
-					       &slot);
+			ret = btrfs_bin_search(upper->eb, key, &slot);
 			if (ret < 0) {
 				err = ret;
 				goto next;
@@ -3039,15 +2328,15 @@ static int do_relocation(struct btrfs_trans_handle *trans,
 		}
 next:
 		if (!upper->pending)
-			drop_node_buffer(upper);
+			btrfs_backref_drop_node_buffer(upper);
 		else
-			unlock_node_buffer(upper);
+			btrfs_backref_unlock_node_buffer(upper);
 		if (err)
 			break;
 	}
 
 	if (!err && node->pending) {
-		drop_node_buffer(node);
+		btrfs_backref_drop_node_buffer(node);
 		list_move_tail(&node->list, &rc->backref_cache.changed);
 		node->pending = 0;
 	}
@@ -3059,7 +2348,7 @@ static int do_relocation(struct btrfs_trans_handle *trans,
 
 static int link_to_upper(struct btrfs_trans_handle *trans,
 			 struct reloc_control *rc,
-			 struct backref_node *node,
+			 struct btrfs_backref_node *node,
 			 struct btrfs_path *path)
 {
 	struct btrfs_key key;
@@ -3073,15 +2362,15 @@ static int finish_pending_nodes(struct btrfs_trans_handle *trans,
 				struct btrfs_path *path, int err)
 {
 	LIST_HEAD(list);
-	struct backref_cache *cache = &rc->backref_cache;
-	struct backref_node *node;
+	struct btrfs_backref_cache *cache = &rc->backref_cache;
+	struct btrfs_backref_node *node;
 	int level;
 	int ret;
 
 	for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
 		while (!list_empty(&cache->pending[level])) {
 			node = list_entry(cache->pending[level].next,
-					  struct backref_node, list);
+					  struct btrfs_backref_node, list);
 			list_move_tail(&node->list, &list);
 			BUG_ON(!node->pending);
 
@@ -3096,35 +2385,16 @@ static int finish_pending_nodes(struct btrfs_trans_handle *trans,
 	return err;
 }
 
-static void mark_block_processed(struct reloc_control *rc,
-				 u64 bytenr, u32 blocksize)
-{
-	set_extent_bits(&rc->processed_blocks, bytenr, bytenr + blocksize - 1,
-			EXTENT_DIRTY);
-}
-
-static void __mark_block_processed(struct reloc_control *rc,
-				   struct backref_node *node)
-{
-	u32 blocksize;
-	if (node->level == 0 ||
-	    in_block_group(node->bytenr, rc->block_group)) {
-		blocksize = rc->extent_root->fs_info->nodesize;
-		mark_block_processed(rc, node->bytenr, blocksize);
-	}
-	node->processed = 1;
-}
-
 /*
  * mark a block and all blocks directly/indirectly reference the block
  * as processed.
  */
 static void update_processed_blocks(struct reloc_control *rc,
-				    struct backref_node *node)
+				    struct btrfs_backref_node *node)
 {
-	struct backref_node *next = node;
-	struct backref_edge *edge;
-	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	struct btrfs_backref_node *next = node;
+	struct btrfs_backref_edge *edge;
+	struct btrfs_backref_edge *edges[BTRFS_MAX_LEVEL - 1];
 	int index = 0;
 
 	while (next) {
@@ -3133,13 +2403,13 @@ static void update_processed_blocks(struct reloc_control *rc,
 			if (next->processed)
 				break;
 
-			__mark_block_processed(rc, next);
+			mark_block_processed(rc, next);
 
 			if (list_empty(&next->upper))
 				break;
 
 			edge = list_entry(next->upper.next,
-					  struct backref_edge, list[LOWER]);
+					struct btrfs_backref_edge, list[LOWER]);
 			edges[index++] = edge;
 			next = edge->node[UPPER];
 		}
@@ -3184,7 +2454,7 @@ static int get_tree_block_key(struct btrfs_fs_info *fs_info,
  */
 static int relocate_tree_block(struct btrfs_trans_handle *trans,
 				struct reloc_control *rc,
-				struct backref_node *node,
+				struct btrfs_backref_node *node,
 				struct btrfs_key *key,
 				struct btrfs_path *path)
 {
@@ -3234,7 +2504,7 @@ static int relocate_tree_block(struct btrfs_trans_handle *trans,
 	}
 out:
 	if (ret || node->level == 0 || node->cowonly)
-		remove_backref_node(&rc->backref_cache, node);
+		btrfs_backref_cleanup_node(&rc->backref_cache, node);
 	return ret;
 }
 
@@ -3246,7 +2516,7 @@ int relocate_tree_blocks(struct btrfs_trans_handle *trans,
 			 struct reloc_control *rc, struct rb_root *blocks)
 {
 	struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
-	struct backref_node *node;
+	struct btrfs_backref_node *node;
 	struct btrfs_path *path;
 	struct tree_block *block;
 	struct tree_block *next;
@@ -3613,9 +2883,10 @@ static int add_tree_block(struct reloc_control *rc,
 	block->level = level;
 	block->key_ready = 0;
 
-	rb_node = tree_insert(blocks, block->bytenr, &block->rb_node);
+	rb_node = rb_simple_insert(blocks, block->bytenr, &block->rb_node);
 	if (rb_node)
-		backref_tree_panic(rb_node, -EEXIST, block->bytenr);
+		btrfs_backref_panic(rc->extent_root->fs_info, block->bytenr,
+				    -EEXIST);
 
 	return 0;
 }
@@ -3636,7 +2907,7 @@ static int __add_tree_block(struct reloc_control *rc,
 	if (tree_block_processed(bytenr, rc))
 		return 0;
 
-	if (tree_search(blocks, bytenr))
+	if (rb_simple_search(blocks, bytenr))
 		return 0;
 
 	path = btrfs_alloc_path();
@@ -4122,7 +3393,7 @@ static noinline_for_stack int relocate_block_group(struct reloc_control *rc)
 	rc->create_reloc_tree = 0;
 	set_reloc_control(rc);
 
-	backref_cache_cleanup(&rc->backref_cache);
+	btrfs_backref_release_cache(&rc->backref_cache);
 	btrfs_block_rsv_release(fs_info, rc->block_rsv, (u64)-1, NULL);
 
 	/*
@@ -4249,7 +3520,7 @@ static struct reloc_control *alloc_reloc_control(struct btrfs_fs_info *fs_info)
 
 	INIT_LIST_HEAD(&rc->reloc_roots);
 	INIT_LIST_HEAD(&rc->dirty_subvol_roots);
-	backref_cache_init(&rc->backref_cache);
+	btrfs_backref_init_cache(fs_info, &rc->backref_cache, 1);
 	mapping_tree_init(&rc->reloc_root_tree);
 	extent_io_tree_init(fs_info, &rc->processed_blocks,
 			    IO_TREE_RELOC_BLOCKS, NULL);
@@ -4559,6 +3830,7 @@ int btrfs_recover_relocation(struct btrfs_root *root)
 		if (IS_ERR(fs_root)) {
 			err = PTR_ERR(fs_root);
 			list_add_tail(&reloc_root->root_list, &reloc_roots);
+			btrfs_end_transaction(trans);
 			goto out_unset;
 		}
 
@@ -4590,8 +3862,7 @@ int btrfs_recover_relocation(struct btrfs_root *root)
 	unset_reloc_control(rc);
 	free_reloc_control(rc);
 out:
-	if (!list_empty(&reloc_roots))
-		free_reloc_roots(&reloc_roots);
+	free_reloc_roots(&reloc_roots);
 
 	btrfs_free_path(path);
 
@@ -4665,7 +3936,7 @@ int btrfs_reloc_cow_block(struct btrfs_trans_handle *trans,
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct reloc_control *rc;
-	struct backref_node *node;
+	struct btrfs_backref_node *node;
 	int first_cow = 0;
 	int level;
 	int ret = 0;
@@ -4690,7 +3961,7 @@ int btrfs_reloc_cow_block(struct btrfs_trans_handle *trans,
 		BUG_ON(node->bytenr != buf->start &&
 		       node->new_bytenr != buf->start);
 
-		drop_node_buffer(node);
+		btrfs_backref_drop_node_buffer(node);
 		atomic_inc(&cow->refs);
 		node->eb = cow;
 		node->new_bytenr = cow->start;
@@ -4702,7 +3973,7 @@ int btrfs_reloc_cow_block(struct btrfs_trans_handle *trans,
 		}
 
 		if (first_cow)
-			__mark_block_processed(rc, node);
+			mark_block_processed(rc, node);
 
 		if (first_cow && level > 0)
 			rc->nodes_relocated += buf->len;
diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c
index ff17a4420358..41ee88633769 100644
--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -626,6 +626,7 @@ static int may_commit_transaction(struct btrfs_fs_info *fs_info,
 	struct reserve_ticket *ticket = NULL;
 	struct btrfs_block_rsv *delayed_rsv = &fs_info->delayed_block_rsv;
 	struct btrfs_block_rsv *delayed_refs_rsv = &fs_info->delayed_refs_rsv;
+	struct btrfs_block_rsv *trans_rsv = &fs_info->trans_block_rsv;
 	struct btrfs_trans_handle *trans;
 	u64 bytes_needed;
 	u64 reclaim_bytes = 0;
@@ -688,6 +689,11 @@ static int may_commit_transaction(struct btrfs_fs_info *fs_info,
 	spin_lock(&delayed_refs_rsv->lock);
 	reclaim_bytes += delayed_refs_rsv->reserved;
 	spin_unlock(&delayed_refs_rsv->lock);
+
+	spin_lock(&trans_rsv->lock);
+	reclaim_bytes += trans_rsv->reserved;
+	spin_unlock(&trans_rsv->lock);
+
 	if (reclaim_bytes >= bytes_needed)
 		goto commit;
 	bytes_needed -= reclaim_bytes;
@@ -856,6 +862,34 @@ static inline int need_do_async_reclaim(struct btrfs_fs_info *fs_info,
 		!test_bit(BTRFS_FS_STATE_REMOUNTING, &fs_info->fs_state));
 }
 
+static bool steal_from_global_rsv(struct btrfs_fs_info *fs_info,
+				  struct btrfs_space_info *space_info,
+				  struct reserve_ticket *ticket)
+{
+	struct btrfs_block_rsv *global_rsv = &fs_info->global_block_rsv;
+	u64 min_bytes;
+
+	if (global_rsv->space_info != space_info)
+		return false;
+
+	spin_lock(&global_rsv->lock);
+	min_bytes = div_factor(global_rsv->size, 1);
+	if (global_rsv->reserved < min_bytes + ticket->bytes) {
+		spin_unlock(&global_rsv->lock);
+		return false;
+	}
+	global_rsv->reserved -= ticket->bytes;
+	ticket->bytes = 0;
+	list_del_init(&ticket->list);
+	wake_up(&ticket->wait);
+	space_info->tickets_id++;
+	if (global_rsv->reserved < global_rsv->size)
+		global_rsv->full = 0;
+	spin_unlock(&global_rsv->lock);
+
+	return true;
+}
+
 /*
  * maybe_fail_all_tickets - we've exhausted our flushing, start failing tickets
  * @fs_info - fs_info for this fs
@@ -888,6 +922,10 @@ static bool maybe_fail_all_tickets(struct btrfs_fs_info *fs_info,
 		ticket = list_first_entry(&space_info->tickets,
 					  struct reserve_ticket, list);
 
+		if (ticket->steal &&
+		    steal_from_global_rsv(fs_info, space_info, ticket))
+			return true;
+
 		/*
 		 * may_commit_transaction will avoid committing the transaction
 		 * if it doesn't feel like the space reclaimed by the commit
@@ -1104,6 +1142,7 @@ static int handle_reserve_ticket(struct btrfs_fs_info *fs_info,
 
 	switch (flush) {
 	case BTRFS_RESERVE_FLUSH_ALL:
+	case BTRFS_RESERVE_FLUSH_ALL_STEAL:
 		wait_reserve_ticket(fs_info, space_info, ticket);
 		break;
 	case BTRFS_RESERVE_FLUSH_LIMIT:
@@ -1125,11 +1164,17 @@ static int handle_reserve_ticket(struct btrfs_fs_info *fs_info,
 	ret = ticket->error;
 	if (ticket->bytes || ticket->error) {
 		/*
-		 * Need to delete here for priority tickets. For regular tickets
-		 * either the async reclaim job deletes the ticket from the list
-		 * or we delete it ourselves at wait_reserve_ticket().
+		 * We were a priority ticket, so we need to delete ourselves
+		 * from the list.  Because we could have other priority tickets
+		 * behind us that require less space, run
+		 * btrfs_try_granting_tickets() to see if their reservations can
+		 * now be made.
 		 */
-		remove_ticket(space_info, ticket);
+		if (!list_empty(&ticket->list)) {
+			remove_ticket(space_info, ticket);
+			btrfs_try_granting_tickets(fs_info, space_info);
+		}
+
 		if (!ret)
 			ret = -ENOSPC;
 	}
@@ -1145,6 +1190,16 @@ static int handle_reserve_ticket(struct btrfs_fs_info *fs_info,
 	return ret;
 }
 
+/*
+ * This returns true if this flush state will go through the ordinary flushing
+ * code.
+ */
+static inline bool is_normal_flushing(enum btrfs_reserve_flush_enum flush)
+{
+	return	(flush == BTRFS_RESERVE_FLUSH_ALL) ||
+		(flush == BTRFS_RESERVE_FLUSH_ALL_STEAL);
+}
+
 /**
  * reserve_metadata_bytes - try to reserve bytes from the block_rsv's space
  * @root - the root we're allocating for
@@ -1175,8 +1230,17 @@ static int __reserve_metadata_bytes(struct btrfs_fs_info *fs_info,
 	spin_lock(&space_info->lock);
 	ret = -ENOSPC;
 	used = btrfs_space_info_used(space_info, true);
-	pending_tickets = !list_empty(&space_info->tickets) ||
-		!list_empty(&space_info->priority_tickets);
+
+	/*
+	 * We don't want NO_FLUSH allocations to jump everybody, they can
+	 * generally handle ENOSPC in a different way, so treat them the same as
+	 * normal flushers when it comes to skipping pending tickets.
+	 */
+	if (is_normal_flushing(flush) || (flush == BTRFS_RESERVE_NO_FLUSH))
+		pending_tickets = !list_empty(&space_info->tickets) ||
+			!list_empty(&space_info->priority_tickets);
+	else
+		pending_tickets = !list_empty(&space_info->priority_tickets);
 
 	/*
 	 * Carry on if we have enough space (short-circuit) OR call
@@ -1198,12 +1262,13 @@ static int __reserve_metadata_bytes(struct btrfs_fs_info *fs_info,
 	 * the list and we will do our own flushing further down.
 	 */
 	if (ret && flush != BTRFS_RESERVE_NO_FLUSH) {
-		ASSERT(space_info->reclaim_size >= 0);
 		ticket.bytes = orig_bytes;
 		ticket.error = 0;
 		space_info->reclaim_size += ticket.bytes;
 		init_waitqueue_head(&ticket.wait);
-		if (flush == BTRFS_RESERVE_FLUSH_ALL) {
+		ticket.steal = (flush == BTRFS_RESERVE_FLUSH_ALL_STEAL);
+		if (flush == BTRFS_RESERVE_FLUSH_ALL ||
+		    flush == BTRFS_RESERVE_FLUSH_ALL_STEAL) {
 			list_add_tail(&ticket.list, &space_info->tickets);
 			if (!space_info->flush) {
 				space_info->flush = 1;
diff --git a/fs/btrfs/space-info.h b/fs/btrfs/space-info.h
index 0a5001ef1481..c3c64019950a 100644
--- a/fs/btrfs/space-info.h
+++ b/fs/btrfs/space-info.h
@@ -78,6 +78,7 @@ struct btrfs_space_info {
 struct reserve_ticket {
 	u64 bytes;
 	int error;
+	bool steal;
 	struct list_head list;
 	wait_queue_head_t wait;
 };
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 8cede6eb9843..e4dbd8e3c641 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -21,6 +21,7 @@
 #include "dev-replace.h"
 #include "qgroup.h"
 #include "block-group.h"
+#include "space-info.h"
 
 #define BTRFS_ROOT_TRANS_TAG 0
 
@@ -523,6 +524,7 @@ start_transaction(struct btrfs_root *root, unsigned int num_items,
 	u64 num_bytes = 0;
 	u64 qgroup_reserved = 0;
 	bool reloc_reserved = false;
+	bool do_chunk_alloc = false;
 	int ret;
 
 	/* Send isn't supposed to start transactions. */
@@ -563,7 +565,8 @@ start_transaction(struct btrfs_root *root, unsigned int num_items,
 		 * refill that amount for whatever is missing in the reserve.
 		 */
 		num_bytes = btrfs_calc_insert_metadata_size(fs_info, num_items);
-		if (delayed_refs_rsv->full == 0) {
+		if (flush == BTRFS_RESERVE_FLUSH_ALL &&
+		    delayed_refs_rsv->full == 0) {
 			delayed_refs_bytes = num_bytes;
 			num_bytes <<= 1;
 		}
@@ -584,6 +587,9 @@ start_transaction(struct btrfs_root *root, unsigned int num_items,
 							  delayed_refs_bytes);
 			num_bytes -= delayed_refs_bytes;
 		}
+
+		if (rsv->space_info->force_alloc)
+			do_chunk_alloc = true;
 	} else if (num_items == 0 && flush == BTRFS_RESERVE_FLUSH_ALL &&
 		   !delayed_refs_rsv->full) {
 		/*
@@ -666,6 +672,19 @@ start_transaction(struct btrfs_root *root, unsigned int num_items,
 
 	if (!current->journal_info)
 		current->journal_info = h;
+
+	/*
+	 * If the space_info is marked ALLOC_FORCE then we'll get upgraded to
+	 * ALLOC_FORCE the first run through, and then we won't allocate for
+	 * anybody else who races in later.  We don't care about the return
+	 * value here.
+	 */
+	if (do_chunk_alloc && num_bytes) {
+		u64 flags = h->block_rsv->space_info->flags;
+		btrfs_chunk_alloc(h, btrfs_get_alloc_profile(fs_info, flags),
+				  CHUNK_ALLOC_NO_FORCE);
+	}
+
 	return h;
 
 join_fail:
@@ -690,43 +709,10 @@ struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
 
 struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
 					struct btrfs_root *root,
-					unsigned int num_items,
-					int min_factor)
+					unsigned int num_items)
 {
-	struct btrfs_fs_info *fs_info = root->fs_info;
-	struct btrfs_trans_handle *trans;
-	u64 num_bytes;
-	int ret;
-
-	/*
-	 * We have two callers: unlink and block group removal.  The
-	 * former should succeed even if we will temporarily exceed
-	 * quota and the latter operates on the extent root so
-	 * qgroup enforcement is ignored anyway.
-	 */
-	trans = start_transaction(root, num_items, TRANS_START,
-				  BTRFS_RESERVE_FLUSH_ALL, false);
-	if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
-		return trans;
-
-	trans = btrfs_start_transaction(root, 0);
-	if (IS_ERR(trans))
-		return trans;
-
-	num_bytes = btrfs_calc_insert_metadata_size(fs_info, num_items);
-	ret = btrfs_cond_migrate_bytes(fs_info, &fs_info->trans_block_rsv,
-				       num_bytes, min_factor);
-	if (ret) {
-		btrfs_end_transaction(trans);
-		return ERR_PTR(ret);
-	}
-
-	trans->block_rsv = &fs_info->trans_block_rsv;
-	trans->bytes_reserved = num_bytes;
-	trace_btrfs_space_reservation(fs_info, "transaction",
-				      trans->transid, num_bytes, 1);
-
-	return trans;
+	return start_transaction(root, num_items, TRANS_START,
+				 BTRFS_RESERVE_FLUSH_ALL_STEAL, false);
 }
 
 struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root)
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 31ae8d273065..bf102e64bfb2 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -193,8 +193,7 @@ struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
 						   unsigned int num_items);
 struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
 					struct btrfs_root *root,
-					unsigned int num_items,
-					int min_factor);
+					unsigned int num_items);
 struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root);
 struct btrfs_trans_handle *btrfs_join_transaction_spacecache(struct btrfs_root *root);
 struct btrfs_trans_handle *btrfs_join_transaction_nostart(struct btrfs_root *root);
diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c
index a92f8a6dd192..517b44300a05 100644
--- a/fs/btrfs/tree-checker.c
+++ b/fs/btrfs/tree-checker.c
@@ -957,10 +957,6 @@ static int check_dev_item(struct extent_buffer *leaf,
 	return 0;
 }
 
-/* Inode item error output has the same format as dir_item_err() */
-#define inode_item_err(eb, slot, fmt, ...)			\
-	dir_item_err(eb, slot, fmt, __VA_ARGS__)
-
 static int check_inode_item(struct extent_buffer *leaf,
 			    struct btrfs_key *key, int slot)
 {
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index ec36a7c6ba3d..7a20e14e0268 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3816,8 +3816,7 @@ static int drop_objectid_items(struct btrfs_trans_handle *trans,
 
 		found_key.offset = 0;
 		found_key.type = 0;
-		ret = btrfs_bin_search(path->nodes[0], &found_key, 0,
-				       &start_slot);
+		ret = btrfs_bin_search(path->nodes[0], &found_key, &start_slot);
 		if (ret < 0)
 			break;
 
@@ -4226,6 +4225,9 @@ static int btrfs_log_prealloc_extents(struct btrfs_trans_handle *trans,
 	const u64 ino = btrfs_ino(inode);
 	struct btrfs_path *dst_path = NULL;
 	bool dropped_extents = false;
+	u64 truncate_offset = i_size;
+	struct extent_buffer *leaf;
+	int slot;
 	int ins_nr = 0;
 	int start_slot;
 	int ret;
@@ -4240,9 +4242,43 @@ static int btrfs_log_prealloc_extents(struct btrfs_trans_handle *trans,
 	if (ret < 0)
 		goto out;
 
+	/*
+	 * We must check if there is a prealloc extent that starts before the
+	 * i_size and crosses the i_size boundary. This is to ensure later we
+	 * truncate down to the end of that extent and not to the i_size, as
+	 * otherwise we end up losing part of the prealloc extent after a log
+	 * replay and with an implicit hole if there is another prealloc extent
+	 * that starts at an offset beyond i_size.
+	 */
+	ret = btrfs_previous_item(root, path, ino, BTRFS_EXTENT_DATA_KEY);
+	if (ret < 0)
+		goto out;
+
+	if (ret == 0) {
+		struct btrfs_file_extent_item *ei;
+
+		leaf = path->nodes[0];
+		slot = path->slots[0];
+		ei = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
+
+		if (btrfs_file_extent_type(leaf, ei) ==
+		    BTRFS_FILE_EXTENT_PREALLOC) {
+			u64 extent_end;
+
+			btrfs_item_key_to_cpu(leaf, &key, slot);
+			extent_end = key.offset +
+				btrfs_file_extent_disk_num_bytes(leaf, ei);
+
+			if (extent_end > i_size)
+				truncate_offset = extent_end;
+		}
+	} else {
+		ret = 0;
+	}
+
 	while (true) {
-		struct extent_buffer *leaf = path->nodes[0];
-		int slot = path->slots[0];
+		leaf = path->nodes[0];
+		slot = path->slots[0];
 
 		if (slot >= btrfs_header_nritems(leaf)) {
 			if (ins_nr > 0) {
@@ -4280,7 +4316,7 @@ static int btrfs_log_prealloc_extents(struct btrfs_trans_handle *trans,
 				ret = btrfs_truncate_inode_items(trans,
 							 root->log_root,
 							 &inode->vfs_inode,
-							 i_size,
+							 truncate_offset,
 							 BTRFS_EXTENT_DATA_KEY);
 			} while (ret == -EAGAIN);
 			if (ret)
@@ -4299,12 +4335,9 @@ static int btrfs_log_prealloc_extents(struct btrfs_trans_handle *trans,
 			}
 		}
 	}
-	if (ins_nr > 0) {
+	if (ins_nr > 0)
 		ret = copy_items(trans, inode, dst_path, path,
 				 start_slot, ins_nr, 1, 0);
-		if (ret > 0)
-			ret = 0;
-	}
 out:
 	btrfs_release_path(path);
 	btrfs_free_path(dst_path);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index c1909e5f4506..aa1e0ae32943 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1251,49 +1251,48 @@ void btrfs_release_disk_super(struct btrfs_super_block *super)
 	put_page(page);
 }
 
-static int btrfs_read_disk_super(struct block_device *bdev, u64 bytenr,
-				 struct page **page,
-				 struct btrfs_super_block **disk_super)
+static struct btrfs_super_block *btrfs_read_disk_super(struct block_device *bdev,
+						       u64 bytenr)
 {
+	struct btrfs_super_block *disk_super;
+	struct page *page;
 	void *p;
 	pgoff_t index;
 
 	/* make sure our super fits in the device */
 	if (bytenr + PAGE_SIZE >= i_size_read(bdev->bd_inode))
-		return 1;
+		return ERR_PTR(-EINVAL);
 
 	/* make sure our super fits in the page */
-	if (sizeof(**disk_super) > PAGE_SIZE)
-		return 1;
+	if (sizeof(*disk_super) > PAGE_SIZE)
+		return ERR_PTR(-EINVAL);
 
 	/* make sure our super doesn't straddle pages on disk */
 	index = bytenr >> PAGE_SHIFT;
-	if ((bytenr + sizeof(**disk_super) - 1) >> PAGE_SHIFT != index)
-		return 1;
+	if ((bytenr + sizeof(*disk_super) - 1) >> PAGE_SHIFT != index)
+		return ERR_PTR(-EINVAL);
 
 	/* pull in the page with our super */
-	*page = read_cache_page_gfp(bdev->bd_inode->i_mapping,
-				   index, GFP_KERNEL);
+	page = read_cache_page_gfp(bdev->bd_inode->i_mapping, index, GFP_KERNEL);
 
-	if (IS_ERR(*page))
-		return 1;
+	if (IS_ERR(page))
+		return ERR_CAST(page);
 
-	p = page_address(*page);
+	p = page_address(page);
 
 	/* align our pointer to the offset of the super block */
-	*disk_super = p + offset_in_page(bytenr);
+	disk_super = p + offset_in_page(bytenr);
 
-	if (btrfs_super_bytenr(*disk_super) != bytenr ||
-	    btrfs_super_magic(*disk_super) != BTRFS_MAGIC) {
+	if (btrfs_super_bytenr(disk_super) != bytenr ||
+	    btrfs_super_magic(disk_super) != BTRFS_MAGIC) {
 		btrfs_release_disk_super(p);
-		return 1;
+		return ERR_PTR(-EINVAL);
 	}
 
-	if ((*disk_super)->label[0] &&
-		(*disk_super)->label[BTRFS_LABEL_SIZE - 1])
-		(*disk_super)->label[BTRFS_LABEL_SIZE - 1] = '\0';
+	if (disk_super->label[0] && disk_super->label[BTRFS_LABEL_SIZE - 1])
+		disk_super->label[BTRFS_LABEL_SIZE - 1] = 0;
 
-	return 0;
+	return disk_super;
 }
 
 int btrfs_forget_devices(const char *path)
@@ -1319,7 +1318,6 @@ struct btrfs_device *btrfs_scan_one_device(const char *path, fmode_t flags,
 	bool new_device_added = false;
 	struct btrfs_device *device = NULL;
 	struct block_device *bdev;
-	struct page *page;
 	u64 bytenr;
 
 	lockdep_assert_held(&uuid_mutex);
@@ -1337,8 +1335,9 @@ struct btrfs_device *btrfs_scan_one_device(const char *path, fmode_t flags,
 	if (IS_ERR(bdev))
 		return ERR_CAST(bdev);
 
-	if (btrfs_read_disk_super(bdev, bytenr, &page, &disk_super)) {
-		device = ERR_PTR(-EINVAL);
+	disk_super = btrfs_read_disk_super(bdev, bytenr);
+	if (IS_ERR(disk_super)) {
+		device = ERR_CAST(disk_super);
 		goto error_bdev_put;
 	}
 
diff --git a/fs/buffer.c b/fs/buffer.c
index a60f60396cfa..85b4be1939ce 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -990,10 +990,20 @@ grow_dev_page(struct block_device *bdev, sector_t block,
 			end_block = init_page_buffers(page, bdev,
 						(sector_t)index << sizebits,
 						size);
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+			current->getblk_executed |= 0x01;
+#endif
 			goto done;
 		}
-		if (!try_to_free_buffers(page))
+		if (!try_to_free_buffers(page)) {
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+			current->getblk_executed |= 0x02;
+#endif
 			goto failed;
+		}
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+		current->getblk_executed |= 0x04;
+#endif
 	}
 
 	/*
@@ -1013,6 +1023,9 @@ grow_dev_page(struct block_device *bdev, sector_t block,
 	spin_unlock(&inode->i_mapping->private_lock);
 done:
 	ret = (block < end_block) ? 1 : -ENXIO;
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+	current->getblk_executed |= 0x08;
+#endif
 failed:
 	unlock_page(page);
 	put_page(page);
@@ -1068,6 +1081,12 @@ __getblk_slow(struct block_device *bdev, sector_t block,
 		return NULL;
 	}
 
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+	current->getblk_stamp = jiffies;
+	current->getblk_executed = 0;
+	current->getblk_bh_count = 0;
+	current->getblk_bh_state = 0;
+#endif
 	for (;;) {
 		struct buffer_head *bh;
 		int ret;
@@ -1079,6 +1098,24 @@ __getblk_slow(struct block_device *bdev, sector_t block,
 		ret = grow_buffers(bdev, block, size, gfp);
 		if (ret < 0)
 			return NULL;
+
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+		if (!time_after(jiffies, current->getblk_stamp + 3 * HZ))
+			continue;
+		printk(KERN_ERR "%s(%u): getblk(): executed=%x bh_count=%d bh_state=%lx bdev_super_blocksize=%ld size=%u bdev_super_blocksize_bits=%d bdev_inode_blkbits=%d\n",
+		       current->comm, current->pid, current->getblk_executed,
+		       current->getblk_bh_count, current->getblk_bh_state,
+		       IS_ERR_OR_NULL(bdev->bd_super) ? -1L :
+		       bdev->bd_super->s_blocksize, size,
+		       IS_ERR_OR_NULL(bdev->bd_super) ? -1 :
+		       bdev->bd_super->s_blocksize_bits,
+		       IS_ERR_OR_NULL(bdev->bd_inode) ? -1 :
+		       bdev->bd_inode->i_blkbits);
+		current->getblk_executed = 0;
+		current->getblk_bh_count = 0;
+		current->getblk_bh_state = 0;
+		current->getblk_stamp = jiffies;
+#endif
 	}
 }
 
@@ -1154,12 +1191,19 @@ EXPORT_SYMBOL(mark_buffer_dirty);
 
 void mark_buffer_write_io_error(struct buffer_head *bh)
 {
+	struct super_block *sb;
+
 	set_buffer_write_io_error(bh);
 	/* FIXME: do we need to set this in both places? */
 	if (bh->b_page && bh->b_page->mapping)
 		mapping_set_error(bh->b_page->mapping, -EIO);
 	if (bh->b_assoc_map)
 		mapping_set_error(bh->b_assoc_map, -EIO);
+	rcu_read_lock();
+	sb = READ_ONCE(bh->b_bdev->bd_super);
+	if (sb)
+		errseq_set(&sb->s_wb_err, -EIO);
+	rcu_read_unlock();
 }
 EXPORT_SYMBOL(mark_buffer_write_io_error);
 
@@ -3202,6 +3246,11 @@ EXPORT_SYMBOL(sync_dirty_buffer);
  */
 static inline int buffer_busy(struct buffer_head *bh)
 {
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+	current->getblk_executed |= 0x80;
+	current->getblk_bh_count = atomic_read(&bh->b_count);
+	current->getblk_bh_state = bh->b_state;
+#endif
 	return atomic_read(&bh->b_count) |
 		(bh->b_state & ((1 << BH_Dirty) | (1 << BH_Lock)));
 }
@@ -3240,11 +3289,18 @@ int try_to_free_buffers(struct page *page)
 	int ret = 0;
 
 	BUG_ON(!PageLocked(page));
-	if (PageWriteback(page))
+	if (PageWriteback(page)) {
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+		current->getblk_executed |= 0x10;
+#endif
 		return 0;
+	}
 
 	if (mapping == NULL) {		/* can this still happen? */
 		ret = drop_buffers(page, &buffers_to_free);
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+		current->getblk_executed |= 0x20;
+#endif
 		goto out;
 	}
 
@@ -3268,6 +3324,9 @@ int try_to_free_buffers(struct page *page)
 	if (ret)
 		cancel_dirty_page(page);
 	spin_unlock(&mapping->private_lock);
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+	current->getblk_executed |= 0x40;
+#endif
 out:
 	if (buffers_to_free) {
 		struct buffer_head *bh = buffers_to_free;
diff --git a/fs/compat_binfmt_elf.c b/fs/compat_binfmt_elf.c
index aaad4ca1217e..026e42e83d78 100644
--- a/fs/compat_binfmt_elf.c
+++ b/fs/compat_binfmt_elf.c
@@ -17,6 +17,8 @@
 #include <linux/elfcore-compat.h>
 #include <linux/time.h>
 
+#define ELF_COMPAT	1
+
 /*
  * Rename the basic ELF layout types to refer to the 32-bit class of files.
  */
@@ -28,11 +30,13 @@
 #undef	elf_shdr
 #undef	elf_note
 #undef	elf_addr_t
+#undef	ELF_GNU_PROPERTY_ALIGN
 #define elfhdr		elf32_hdr
 #define elf_phdr	elf32_phdr
 #define elf_shdr	elf32_shdr
 #define elf_note	elf32_note
 #define elf_addr_t	Elf32_Addr
+#define ELF_GNU_PROPERTY_ALIGN	ELF32_GNU_PROPERTY_ALIGN
 
 /*
  * Some data types as stored in coredump.
@@ -113,6 +117,11 @@
 #define	arch_setup_additional_pages compat_arch_setup_additional_pages
 #endif
 
+#ifdef	compat_elf_read_implies_exec
+#undef	elf_read_implies_exec
+#define	elf_read_implies_exec compat_elf_read_implies_exec
+#endif
+
 /*
  * Rename a few of the symbols that binfmt_elf.c will define.
  * These are all local so the names don't really matter, but it
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index cf7b7e1d5bd7..cb733652ecca 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -1519,6 +1519,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 		spin_lock(&configfs_dirent_lock);
 		configfs_detach_rollback(dentry);
 		spin_unlock(&configfs_dirent_lock);
+		config_item_put(parent_item);
 		return -EINTR;
 	}
 	frag->frag_dead = true;
diff --git a/fs/coredump.c b/fs/coredump.c
index 408418e6aa13..478a0d810136 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -788,6 +788,14 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 	if (displaced)
 		put_files_struct(displaced);
 	if (!dump_interrupted()) {
+		/*
+		 * umh disabled with CONFIG_STATIC_USERMODEHELPER_PATH="" would
+		 * have this set to NULL.
+		 */
+		if (!cprm.file) {
+			pr_info("Core dump to |%s disabled\n", cn.corename);
+			goto close_fail;
+		}
 		file_start_write(cprm.file);
 		core_dumped = binfmt->core_dump(&cprm);
 		file_end_write(cprm.file);
diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig
index c8bebb70a971..d98cef0dbb6b 100644
--- a/fs/cramfs/Kconfig
+++ b/fs/cramfs/Kconfig
@@ -9,7 +9,7 @@ config CRAMFS
 	  limited to 256MB file systems (with 16MB files), and doesn't support
 	  16/32 bits uid/gid, hard links and timestamps.
 
-	  See <file:Documentation/filesystems/cramfs.txt> and
+	  See <file:Documentation/filesystems/cramfs.rst> and
 	  <file:fs/cramfs/README> for further information.
 
 	  To compile this as a module, choose M here: the module will be called
diff --git a/fs/dcache.c b/fs/dcache.c
index b280e07e162b..8dd4d8d7bd0b 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -165,7 +165,7 @@ static long get_nr_dentry_negative(void)
 	return sum < 0 ? 0 : sum;
 }
 
-int proc_nr_dentry(struct ctl_table *table, int write, void __user *buffer,
+int proc_nr_dentry(struct ctl_table *table, int write, void *buffer,
 		   size_t *lenp, loff_t *ppos)
 {
 	dentry_stat.nr_dentry = get_nr_dentry();
diff --git a/fs/debugfs/internal.h b/fs/debugfs/internal.h
index f0d73d86cc1a..034e6973cead 100644
--- a/fs/debugfs/internal.h
+++ b/fs/debugfs/internal.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  *  internal.h - declarations internal to debugfs
  *
diff --git a/fs/dlm/dlm_internal.h b/fs/dlm/dlm_internal.h
index 416d9de35679..d231ae5d2c65 100644
--- a/fs/dlm/dlm_internal.h
+++ b/fs/dlm/dlm_internal.h
@@ -421,7 +421,7 @@ struct dlm_message {
 	int			m_bastmode;
 	int			m_asts;
 	int			m_result;	/* 0 or -EXXX */
-	char			m_extra[0];	/* name or lvb */
+	char			m_extra[];	/* name or lvb */
 };
 
 
@@ -450,7 +450,7 @@ struct dlm_rcom {
 	uint64_t		rc_id;		/* match reply with request */
 	uint64_t		rc_seq;		/* sender's ls_recover_seq */
 	uint64_t		rc_seq_reply;	/* remote ls_recover_seq */
-	char			rc_buf[0];
+	char			rc_buf[];
 };
 
 union dlm_packet {
@@ -506,7 +506,7 @@ struct rcom_lock {
 	__le16			rl_wait_type;
 	__le16			rl_namelen;
 	char			rl_name[DLM_RESNAME_MAXLEN];
-	char			rl_lvb[0];
+	char			rl_lvb[];
 };
 
 /*
diff --git a/fs/dlm/user.c b/fs/dlm/user.c
index 5264bac75115..e5cefa90b1ce 100644
--- a/fs/dlm/user.c
+++ b/fs/dlm/user.c
@@ -46,7 +46,7 @@ struct dlm_lock_params32 {
 	__u32 bastaddr;
 	__u32 lksb;
 	char lvb[DLM_USER_LVB_LEN];
-	char name[0];
+	char name[];
 };
 
 struct dlm_write_request32 {
diff --git a/fs/drop_caches.c b/fs/drop_caches.c
index dc1a1d5d825b..f00fcc4a4f72 100644
--- a/fs/drop_caches.c
+++ b/fs/drop_caches.c
@@ -47,7 +47,7 @@ static void drop_pagecache_sb(struct super_block *sb, void *unused)
 }
 
 int drop_caches_sysctl_handler(struct ctl_table *table, int write,
-	void __user *buffer, size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
 	int ret;
 
diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig
index 522c35d5292b..1bdeaa6d5790 100644
--- a/fs/ecryptfs/Kconfig
+++ b/fs/ecryptfs/Kconfig
@@ -7,7 +7,7 @@ config ECRYPT_FS
 	select CRYPTO_MD5
 	help
 	  Encrypted filesystem that operates on the VFS layer.  See
-	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
+	  <file:Documentation/filesystems/ecryptfs.rst> to learn more about
 	  eCryptfs.  Userspace components are required and can be
 	  obtained from <http://ecryptfs.sf.net>.
 
diff --git a/fs/erofs/data.c b/fs/erofs/data.c
index fc3a8d8064f8..d0542151e8c4 100644
--- a/fs/erofs/data.c
+++ b/fs/erofs/data.c
@@ -280,47 +280,36 @@ static int erofs_raw_access_readpage(struct file *file, struct page *page)
 	return 0;
 }
 
-static int erofs_raw_access_readpages(struct file *filp,
-				      struct address_space *mapping,
-				      struct list_head *pages,
-				      unsigned int nr_pages)
+static void erofs_raw_access_readahead(struct readahead_control *rac)
 {
 	erofs_off_t last_block;
 	struct bio *bio = NULL;
-	gfp_t gfp = readahead_gfp_mask(mapping);
-	struct page *page = list_last_entry(pages, struct page, lru);
-
-	trace_erofs_readpages(mapping->host, page, nr_pages, true);
+	struct page *page;
 
-	for (; nr_pages; --nr_pages) {
-		page = list_entry(pages->prev, struct page, lru);
+	trace_erofs_readpages(rac->mapping->host, readahead_index(rac),
+			readahead_count(rac), true);
 
+	while ((page = readahead_page(rac))) {
 		prefetchw(&page->flags);
-		list_del(&page->lru);
 
-		if (!add_to_page_cache_lru(page, mapping, page->index, gfp)) {
-			bio = erofs_read_raw_page(bio, mapping, page,
-						  &last_block, nr_pages, true);
+		bio = erofs_read_raw_page(bio, rac->mapping, page, &last_block,
+				readahead_count(rac), true);
 
-			/* all the page errors are ignored when readahead */
-			if (IS_ERR(bio)) {
-				pr_err("%s, readahead error at page %lu of nid %llu\n",
-				       __func__, page->index,
-				       EROFS_I(mapping->host)->nid);
+		/* all the page errors are ignored when readahead */
+		if (IS_ERR(bio)) {
+			pr_err("%s, readahead error at page %lu of nid %llu\n",
+			       __func__, page->index,
+			       EROFS_I(rac->mapping->host)->nid);
 
-				bio = NULL;
-			}
+			bio = NULL;
 		}
 
-		/* pages could still be locked */
 		put_page(page);
 	}
-	DBG_BUGON(!list_empty(pages));
 
 	/* the rare case (end in gaps) */
 	if (bio)
 		submit_bio(bio);
-	return 0;
 }
 
 static int erofs_get_block(struct inode *inode, sector_t iblock,
@@ -358,7 +347,7 @@ static sector_t erofs_bmap(struct address_space *mapping, sector_t block)
 /* for uncompressed (aligned) files and raw access for other files */
 const struct address_space_operations erofs_raw_access_aops = {
 	.readpage = erofs_raw_access_readpage,
-	.readpages = erofs_raw_access_readpages,
+	.readahead = erofs_raw_access_readahead,
 	.bmap = erofs_bmap,
 };
 
diff --git a/fs/erofs/decompressor.c b/fs/erofs/decompressor.c
index 5d2d81940679..7628816f2453 100644
--- a/fs/erofs/decompressor.c
+++ b/fs/erofs/decompressor.c
@@ -274,7 +274,7 @@ static int z_erofs_decompress_generic(struct z_erofs_decompress_req *rq,
 
 	i = 0;
 	while (1) {
-		dst = vm_map_ram(rq->out, nrpages_out, -1, PAGE_KERNEL);
+		dst = vm_map_ram(rq->out, nrpages_out, -1);
 
 		/* retry two more times (totally 3 times) */
 		if (dst || ++i >= 3)
diff --git a/fs/erofs/internal.h b/fs/erofs/internal.h
index 5eead7fdc7a6..1c077b7bb43d 100644
--- a/fs/erofs/internal.h
+++ b/fs/erofs/internal.h
@@ -46,6 +46,17 @@ typedef u64 erofs_off_t;
 /* data type for filesystem-wide blocks number */
 typedef u32 erofs_blk_t;
 
+struct erofs_fs_context {
+#ifdef CONFIG_EROFS_FS_ZIP
+	/* current strategy of how to use managed cache */
+	unsigned char cache_strategy;
+
+	/* threshold for decompression synchronously */
+	unsigned int max_sync_decompress_pages;
+#endif
+	unsigned int mount_opt;
+};
+
 struct erofs_sb_info {
 #ifdef CONFIG_EROFS_FS_ZIP
 	/* list for all registered superblocks, mainly for shrinker */
@@ -55,14 +66,8 @@ struct erofs_sb_info {
 	/* managed XArray arranged in physical block number */
 	struct xarray managed_pslots;
 
-	/* threshold for decompression synchronously */
-	unsigned int max_sync_decompress_pages;
-
 	unsigned int shrinker_run_no;
 
-	/* current strategy of how to use managed cache */
-	unsigned char cache_strategy;
-
 	/* pseudo inode to manage cached pages */
 	struct inode *managed_cache;
 #endif	/* CONFIG_EROFS_FS_ZIP */
@@ -88,7 +93,7 @@ struct erofs_sb_info {
 	u32 feature_compat;
 	u32 feature_incompat;
 
-	unsigned int mount_opt;
+	struct erofs_fs_context ctx;	/* options */
 };
 
 #define EROFS_SB(sb) ((struct erofs_sb_info *)(sb)->s_fs_info)
@@ -98,17 +103,17 @@ struct erofs_sb_info {
 #define EROFS_MOUNT_XATTR_USER		0x00000010
 #define EROFS_MOUNT_POSIX_ACL		0x00000020
 
-#define clear_opt(sbi, option)	((sbi)->mount_opt &= ~EROFS_MOUNT_##option)
-#define set_opt(sbi, option)	((sbi)->mount_opt |= EROFS_MOUNT_##option)
-#define test_opt(sbi, option)	((sbi)->mount_opt & EROFS_MOUNT_##option)
+#define clear_opt(ctx, option)	((ctx)->mount_opt &= ~EROFS_MOUNT_##option)
+#define set_opt(ctx, option)	((ctx)->mount_opt |= EROFS_MOUNT_##option)
+#define test_opt(ctx, option)	((ctx)->mount_opt & EROFS_MOUNT_##option)
 
-#ifdef CONFIG_EROFS_FS_ZIP
 enum {
 	EROFS_ZIP_CACHE_DISABLED,
 	EROFS_ZIP_CACHE_READAHEAD,
 	EROFS_ZIP_CACHE_READAROUND
 };
 
+#ifdef CONFIG_EROFS_FS_ZIP
 #define EROFS_LOCKED_MAGIC     (INT_MIN | 0xE0F510CCL)
 
 /* basic unit of the workstation of a super_block */
diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index b514c67e5fc2..2c0bad903fa6 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -10,6 +10,8 @@
 #include <linux/parser.h>
 #include <linux/seq_file.h>
 #include <linux/crc32c.h>
+#include <linux/fs_context.h>
+#include <linux/fs_parser.h>
 #include "xattr.h"
 
 #define CREATE_TRACE_POINTS
@@ -192,53 +194,18 @@ static int erofs_read_superblock(struct super_block *sb)
 	return ret;
 }
 
-#ifdef CONFIG_EROFS_FS_ZIP
-static int erofs_build_cache_strategy(struct super_block *sb,
-				      substring_t *args)
-{
-	struct erofs_sb_info *sbi = EROFS_SB(sb);
-	const char *cs = match_strdup(args);
-	int err = 0;
-
-	if (!cs) {
-		erofs_err(sb, "Not enough memory to store cache strategy");
-		return -ENOMEM;
-	}
-
-	if (!strcmp(cs, "disabled")) {
-		sbi->cache_strategy = EROFS_ZIP_CACHE_DISABLED;
-	} else if (!strcmp(cs, "readahead")) {
-		sbi->cache_strategy = EROFS_ZIP_CACHE_READAHEAD;
-	} else if (!strcmp(cs, "readaround")) {
-		sbi->cache_strategy = EROFS_ZIP_CACHE_READAROUND;
-	} else {
-		erofs_err(sb, "Unrecognized cache strategy \"%s\"", cs);
-		err = -EINVAL;
-	}
-	kfree(cs);
-	return err;
-}
-#else
-static int erofs_build_cache_strategy(struct super_block *sb,
-				      substring_t *args)
-{
-	erofs_info(sb, "EROFS compression is disabled, so cache strategy is ignored");
-	return 0;
-}
-#endif
-
 /* set up default EROFS parameters */
-static void erofs_default_options(struct erofs_sb_info *sbi)
+static void erofs_default_options(struct erofs_fs_context *ctx)
 {
 #ifdef CONFIG_EROFS_FS_ZIP
-	sbi->cache_strategy = EROFS_ZIP_CACHE_READAROUND;
-	sbi->max_sync_decompress_pages = 3;
+	ctx->cache_strategy = EROFS_ZIP_CACHE_READAROUND;
+	ctx->max_sync_decompress_pages = 3;
 #endif
 #ifdef CONFIG_EROFS_FS_XATTR
-	set_opt(sbi, XATTR_USER);
+	set_opt(ctx, XATTR_USER);
 #endif
 #ifdef CONFIG_EROFS_FS_POSIX_ACL
-	set_opt(sbi, POSIX_ACL);
+	set_opt(ctx, POSIX_ACL);
 #endif
 }
 
@@ -251,73 +218,62 @@ enum {
 	Opt_err
 };
 
-static match_table_t erofs_tokens = {
-	{Opt_user_xattr, "user_xattr"},
-	{Opt_nouser_xattr, "nouser_xattr"},
-	{Opt_acl, "acl"},
-	{Opt_noacl, "noacl"},
-	{Opt_cache_strategy, "cache_strategy=%s"},
-	{Opt_err, NULL}
+static const struct constant_table erofs_param_cache_strategy[] = {
+	{"disabled",	EROFS_ZIP_CACHE_DISABLED},
+	{"readahead",	EROFS_ZIP_CACHE_READAHEAD},
+	{"readaround",	EROFS_ZIP_CACHE_READAROUND},
+	{}
 };
 
-static int erofs_parse_options(struct super_block *sb, char *options)
-{
-	substring_t args[MAX_OPT_ARGS];
-	char *p;
-	int err;
-
-	if (!options)
-		return 0;
-
-	while ((p = strsep(&options, ","))) {
-		int token;
+static const struct fs_parameter_spec erofs_fs_parameters[] = {
+	fsparam_flag_no("user_xattr",	Opt_user_xattr),
+	fsparam_flag_no("acl",		Opt_acl),
+	fsparam_enum("cache_strategy",	Opt_cache_strategy,
+		     erofs_param_cache_strategy),
+	{}
+};
 
-		if (!*p)
-			continue;
+static int erofs_fc_parse_param(struct fs_context *fc,
+				struct fs_parameter *param)
+{
+	struct erofs_fs_context *ctx __maybe_unused = fc->fs_private;
+	struct fs_parse_result result;
+	int opt;
 
-		args[0].to = args[0].from = NULL;
-		token = match_token(p, erofs_tokens, args);
+	opt = fs_parse(fc, erofs_fs_parameters, param, &result);
+	if (opt < 0)
+		return opt;
 
-		switch (token) {
+	switch (opt) {
+	case Opt_user_xattr:
 #ifdef CONFIG_EROFS_FS_XATTR
-		case Opt_user_xattr:
-			set_opt(EROFS_SB(sb), XATTR_USER);
-			break;
-		case Opt_nouser_xattr:
-			clear_opt(EROFS_SB(sb), XATTR_USER);
-			break;
+		if (result.boolean)
+			set_opt(ctx, XATTR_USER);
+		else
+			clear_opt(ctx, XATTR_USER);
 #else
-		case Opt_user_xattr:
-			erofs_info(sb, "user_xattr options not supported");
-			break;
-		case Opt_nouser_xattr:
-			erofs_info(sb, "nouser_xattr options not supported");
-			break;
+		errorfc(fc, "{,no}user_xattr options not supported");
 #endif
+		break;
+	case Opt_acl:
 #ifdef CONFIG_EROFS_FS_POSIX_ACL
-		case Opt_acl:
-			set_opt(EROFS_SB(sb), POSIX_ACL);
-			break;
-		case Opt_noacl:
-			clear_opt(EROFS_SB(sb), POSIX_ACL);
-			break;
+		if (result.boolean)
+			set_opt(ctx, POSIX_ACL);
+		else
+			clear_opt(ctx, POSIX_ACL);
 #else
-		case Opt_acl:
-			erofs_info(sb, "acl options not supported");
-			break;
-		case Opt_noacl:
-			erofs_info(sb, "noacl options not supported");
-			break;
+		errorfc(fc, "{,no}acl options not supported");
 #endif
-		case Opt_cache_strategy:
-			err = erofs_build_cache_strategy(sb, args);
-			if (err)
-				return err;
-			break;
-		default:
-			erofs_err(sb, "Unrecognized mount option \"%s\" or missing value", p);
-			return -EINVAL;
-		}
+		break;
+	case Opt_cache_strategy:
+#ifdef CONFIG_EROFS_FS_ZIP
+		ctx->cache_strategy = result.uint_32;
+#else
+		errorfc(fc, "compression not supported, cache_strategy ignored");
+#endif
+		break;
+	default:
+		return -ENOPARAM;
 	}
 	return 0;
 }
@@ -381,10 +337,11 @@ static int erofs_init_managed_cache(struct super_block *sb)
 static int erofs_init_managed_cache(struct super_block *sb) { return 0; }
 #endif
 
-static int erofs_fill_super(struct super_block *sb, void *data, int silent)
+static int erofs_fc_fill_super(struct super_block *sb, struct fs_context *fc)
 {
 	struct inode *inode;
 	struct erofs_sb_info *sbi;
+	struct erofs_fs_context *ctx = fc->fs_private;
 	int err;
 
 	sb->s_magic = EROFS_SUPER_MAGIC;
@@ -412,18 +369,14 @@ static int erofs_fill_super(struct super_block *sb, void *data, int silent)
 #ifdef CONFIG_EROFS_FS_XATTR
 	sb->s_xattr = erofs_xattr_handlers;
 #endif
-	/* set erofs default mount options */
-	erofs_default_options(sbi);
 
-	err = erofs_parse_options(sb, data);
-	if (err)
-		return err;
-
-	if (test_opt(sbi, POSIX_ACL))
+	if (test_opt(ctx, POSIX_ACL))
 		sb->s_flags |= SB_POSIXACL;
 	else
 		sb->s_flags &= ~SB_POSIXACL;
 
+	sbi->ctx = *ctx;
+
 #ifdef CONFIG_EROFS_FS_ZIP
 	xa_init(&sbi->managed_pslots);
 #endif
@@ -450,15 +403,58 @@ static int erofs_fill_super(struct super_block *sb, void *data, int silent)
 	if (err)
 		return err;
 
-	erofs_info(sb, "mounted with opts: %s, root inode @ nid %llu.",
-		   (char *)data, ROOT_NID(sbi));
+	erofs_info(sb, "mounted with root inode @ nid %llu.", ROOT_NID(sbi));
+	return 0;
+}
+
+static int erofs_fc_get_tree(struct fs_context *fc)
+{
+	return get_tree_bdev(fc, erofs_fc_fill_super);
+}
+
+static int erofs_fc_reconfigure(struct fs_context *fc)
+{
+	struct super_block *sb = fc->root->d_sb;
+	struct erofs_sb_info *sbi = EROFS_SB(sb);
+	struct erofs_fs_context *ctx = fc->fs_private;
+
+	DBG_BUGON(!sb_rdonly(sb));
+
+	if (test_opt(ctx, POSIX_ACL))
+		fc->sb_flags |= SB_POSIXACL;
+	else
+		fc->sb_flags &= ~SB_POSIXACL;
+
+	sbi->ctx = *ctx;
+
+	fc->sb_flags |= SB_RDONLY;
 	return 0;
 }
 
-static struct dentry *erofs_mount(struct file_system_type *fs_type, int flags,
-				  const char *dev_name, void *data)
+static void erofs_fc_free(struct fs_context *fc)
+{
+	kfree(fc->fs_private);
+}
+
+static const struct fs_context_operations erofs_context_ops = {
+	.parse_param	= erofs_fc_parse_param,
+	.get_tree       = erofs_fc_get_tree,
+	.reconfigure    = erofs_fc_reconfigure,
+	.free		= erofs_fc_free,
+};
+
+static int erofs_init_fs_context(struct fs_context *fc)
 {
-	return mount_bdev(fs_type, flags, dev_name, data, erofs_fill_super);
+	fc->fs_private = kzalloc(sizeof(struct erofs_fs_context), GFP_KERNEL);
+	if (!fc->fs_private)
+		return -ENOMEM;
+
+	/* set default mount options */
+	erofs_default_options(fc->fs_private);
+
+	fc->ops = &erofs_context_ops;
+
+	return 0;
 }
 
 /*
@@ -497,7 +493,7 @@ static void erofs_put_super(struct super_block *sb)
 static struct file_system_type erofs_fs_type = {
 	.owner          = THIS_MODULE,
 	.name           = "erofs",
-	.mount          = erofs_mount,
+	.init_fs_context = erofs_init_fs_context,
 	.kill_sb        = erofs_kill_sb,
 	.fs_flags       = FS_REQUIRES_DEV,
 };
@@ -578,61 +574,38 @@ static int erofs_statfs(struct dentry *dentry, struct kstatfs *buf)
 static int erofs_show_options(struct seq_file *seq, struct dentry *root)
 {
 	struct erofs_sb_info *sbi __maybe_unused = EROFS_SB(root->d_sb);
+	struct erofs_fs_context *ctx __maybe_unused = &sbi->ctx;
 
 #ifdef CONFIG_EROFS_FS_XATTR
-	if (test_opt(sbi, XATTR_USER))
+	if (test_opt(ctx, XATTR_USER))
 		seq_puts(seq, ",user_xattr");
 	else
 		seq_puts(seq, ",nouser_xattr");
 #endif
 #ifdef CONFIG_EROFS_FS_POSIX_ACL
-	if (test_opt(sbi, POSIX_ACL))
+	if (test_opt(ctx, POSIX_ACL))
 		seq_puts(seq, ",acl");
 	else
 		seq_puts(seq, ",noacl");
 #endif
 #ifdef CONFIG_EROFS_FS_ZIP
-	if (sbi->cache_strategy == EROFS_ZIP_CACHE_DISABLED) {
+	if (ctx->cache_strategy == EROFS_ZIP_CACHE_DISABLED) {
 		seq_puts(seq, ",cache_strategy=disabled");
-	} else if (sbi->cache_strategy == EROFS_ZIP_CACHE_READAHEAD) {
+	} else if (ctx->cache_strategy == EROFS_ZIP_CACHE_READAHEAD) {
 		seq_puts(seq, ",cache_strategy=readahead");
-	} else if (sbi->cache_strategy == EROFS_ZIP_CACHE_READAROUND) {
+	} else if (ctx->cache_strategy == EROFS_ZIP_CACHE_READAROUND) {
 		seq_puts(seq, ",cache_strategy=readaround");
 	}
 #endif
 	return 0;
 }
 
-static int erofs_remount(struct super_block *sb, int *flags, char *data)
-{
-	struct erofs_sb_info *sbi = EROFS_SB(sb);
-	unsigned int org_mnt_opt = sbi->mount_opt;
-	int err;
-
-	DBG_BUGON(!sb_rdonly(sb));
-	err = erofs_parse_options(sb, data);
-	if (err)
-		goto out;
-
-	if (test_opt(sbi, POSIX_ACL))
-		sb->s_flags |= SB_POSIXACL;
-	else
-		sb->s_flags &= ~SB_POSIXACL;
-
-	*flags |= SB_RDONLY;
-	return 0;
-out:
-	sbi->mount_opt = org_mnt_opt;
-	return err;
-}
-
 const struct super_operations erofs_sops = {
 	.put_super = erofs_put_super,
 	.alloc_inode = erofs_alloc_inode,
 	.free_inode = erofs_free_inode,
 	.statfs = erofs_statfs,
 	.show_options = erofs_show_options,
-	.remount_fs = erofs_remount,
 };
 
 module_init(erofs_module_init);
diff --git a/fs/erofs/xattr.c b/fs/erofs/xattr.c
index b766c3ee5fa8..87e437e7b34f 100644
--- a/fs/erofs/xattr.c
+++ b/fs/erofs/xattr.c
@@ -422,7 +422,7 @@ static int shared_getxattr(struct inode *inode, struct getxattr_iter *it)
 
 static bool erofs_xattr_user_list(struct dentry *dentry)
 {
-	return test_opt(EROFS_SB(dentry->d_sb), XATTR_USER);
+	return test_opt(&EROFS_SB(dentry->d_sb)->ctx, XATTR_USER);
 }
 
 static bool erofs_xattr_trusted_list(struct dentry *dentry)
@@ -469,7 +469,7 @@ static int erofs_xattr_generic_get(const struct xattr_handler *handler,
 
 	switch (handler->flags) {
 	case EROFS_XATTR_INDEX_USER:
-		if (!test_opt(sbi, XATTR_USER))
+		if (!test_opt(&sbi->ctx, XATTR_USER))
 			return -EOPNOTSUPP;
 		break;
 	case EROFS_XATTR_INDEX_TRUSTED:
diff --git a/fs/erofs/zdata.c b/fs/erofs/zdata.c
index c4b6c9aa87ec..be50a4d9d273 100644
--- a/fs/erofs/zdata.c
+++ b/fs/erofs/zdata.c
@@ -615,7 +615,7 @@ static int z_erofs_do_read_page(struct z_erofs_decompress_frontend *fe,
 		goto err_out;
 
 	/* preload all compressed pages (maybe downgrade role if necessary) */
-	if (should_alloc_managed_pages(fe, sbi->cache_strategy, map->m_la))
+	if (should_alloc_managed_pages(fe, sbi->ctx.cache_strategy, map->m_la))
 		cache_strategy = DELAYEDALLOC;
 	else
 		cache_strategy = DONTALLOC;
@@ -1302,31 +1302,26 @@ static int z_erofs_readpage(struct file *file, struct page *page)
 static bool should_decompress_synchronously(struct erofs_sb_info *sbi,
 					    unsigned int nr)
 {
-	return nr <= sbi->max_sync_decompress_pages;
+	return nr <= sbi->ctx.max_sync_decompress_pages;
 }
 
-static int z_erofs_readpages(struct file *filp, struct address_space *mapping,
-			     struct list_head *pages, unsigned int nr_pages)
+static void z_erofs_readahead(struct readahead_control *rac)
 {
-	struct inode *const inode = mapping->host;
+	struct inode *const inode = rac->mapping->host;
 	struct erofs_sb_info *const sbi = EROFS_I_SB(inode);
 
-	bool sync = should_decompress_synchronously(sbi, nr_pages);
+	bool sync = should_decompress_synchronously(sbi, readahead_count(rac));
 	struct z_erofs_decompress_frontend f = DECOMPRESS_FRONTEND_INIT(inode);
-	gfp_t gfp = mapping_gfp_constraint(mapping, GFP_KERNEL);
-	struct page *head = NULL;
+	struct page *page, *head = NULL;
 	LIST_HEAD(pagepool);
 
-	trace_erofs_readpages(mapping->host, lru_to_page(pages),
-			      nr_pages, false);
+	trace_erofs_readpages(inode, readahead_index(rac),
+			readahead_count(rac), false);
 
-	f.headoffset = (erofs_off_t)lru_to_page(pages)->index << PAGE_SHIFT;
-
-	for (; nr_pages; --nr_pages) {
-		struct page *page = lru_to_page(pages);
+	f.headoffset = readahead_pos(rac);
 
+	while ((page = readahead_page(rac))) {
 		prefetchw(&page->flags);
-		list_del(&page->lru);
 
 		/*
 		 * A pure asynchronous readahead is indicated if
@@ -1335,11 +1330,6 @@ static int z_erofs_readpages(struct file *filp, struct address_space *mapping,
 		 */
 		sync &= !(PageReadahead(page) && !head);
 
-		if (add_to_page_cache_lru(page, mapping, page->index, gfp)) {
-			list_add(&page->lru, &pagepool);
-			continue;
-		}
-
 		set_page_private(page, (unsigned long)head);
 		head = page;
 	}
@@ -1368,11 +1358,10 @@ static int z_erofs_readpages(struct file *filp, struct address_space *mapping,
 
 	/* clean up the remaining free pages */
 	put_pages_list(&pagepool);
-	return 0;
 }
 
 const struct address_space_operations z_erofs_aops = {
 	.readpage = z_erofs_readpage,
-	.readpages = z_erofs_readpages,
+	.readahead = z_erofs_readahead,
 };
 
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 8c596641a72b..d6ba0e52439b 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1171,6 +1171,10 @@ static inline bool chain_epi_lockless(struct epitem *epi)
 {
 	struct eventpoll *ep = epi->ep;
 
+	/* Fast preliminary check */
+	if (epi->next != EP_UNACTIVE_PTR)
+		return false;
+
 	/* Check that the same epi has not been just chained from another CPU */
 	if (cmpxchg(&epi->next, EP_UNACTIVE_PTR, NULL) != EP_UNACTIVE_PTR)
 		return false;
@@ -1237,16 +1241,12 @@ static int ep_poll_callback(wait_queue_entry_t *wait, unsigned mode, int sync, v
 	 * chained in ep->ovflist and requeued later on.
 	 */
 	if (READ_ONCE(ep->ovflist) != EP_UNACTIVE_PTR) {
-		if (epi->next == EP_UNACTIVE_PTR &&
-		    chain_epi_lockless(epi))
+		if (chain_epi_lockless(epi))
+			ep_pm_stay_awake_rcu(epi);
+	} else if (!ep_is_linked(epi)) {
+		/* In the usual case, add event to ready list. */
+		if (list_add_tail_lockless(&epi->rdllink, &ep->rdllist))
 			ep_pm_stay_awake_rcu(epi);
-		goto out_unlock;
-	}
-
-	/* If this file is already in the ready list we exit soon */
-	if (!ep_is_linked(epi) &&
-	    list_add_tail_lockless(&epi->rdllink, &ep->rdllist)) {
-		ep_pm_stay_awake_rcu(epi);
 	}
 
 	/*
diff --git a/fs/exec.c b/fs/exec.c
index 06b4c550af5d..4e1164bf98b2 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1186,11 +1186,8 @@ static int de_thread(struct task_struct *tsk)
 
 		/* Become a process group leader with the old leader's pid.
 		 * The old leader becomes a thread of the this thread group.
-		 * Note: The old leader also uses this pid until release_task
-		 *       is called.  Odd but simple and correct.
 		 */
-		tsk->pid = leader->pid;
-		change_pid(tsk, PIDTYPE_PID, task_pid(leader));
+		exchange_tids(tsk, leader);
 		transfer_pid(leader, tsk, PIDTYPE_TGID);
 		transfer_pid(leader, tsk, PIDTYPE_PGID);
 		transfer_pid(leader, tsk, PIDTYPE_SID);
@@ -1817,11 +1814,17 @@ static int __do_execve_file(int fd, struct filename *filename,
 	check_unsafe_exec(bprm);
 	current->in_execve = 1;
 
-	if (!file)
+	if (!file) {
 		file = do_open_execat(fd, filename, flags);
-	retval = PTR_ERR(file);
-	if (IS_ERR(file))
-		goto out_unmark;
+		retval = PTR_ERR(file);
+		if (IS_ERR(file))
+			goto out_unmark;
+	} else {
+		retval = deny_write_access(file);
+		if (retval)
+			goto out_unmark;
+		get_file(file);
+	}
 
 	sched_exec();
 
diff --git a/fs/exfat/Kconfig b/fs/exfat/Kconfig
index 2d3636dc5b8c..5a65071b5ecf 100644
--- a/fs/exfat/Kconfig
+++ b/fs/exfat/Kconfig
@@ -16,6 +16,7 @@ config EXFAT_DEFAULT_IOCHARSET
 	depends on EXFAT_FS
 	help
 	  Set this to the default input/output character set to use for
-	  converting between the encoding is used for user visible filename and
-	  UTF-16 character that exfat filesystem use, and can be overridden with
-	  the "iocharset" mount option for exFAT filesystems.
+	  converting between the encoding that is used for user visible
+	  filenames and the UTF-16 character encoding that the exFAT
+	  filesystem uses.  This can be overridden with the "iocharset" mount
+	  option for the exFAT filesystems.
diff --git a/fs/exfat/balloc.c b/fs/exfat/balloc.c
index 6774a5a6ded8..4055eb00ea9b 100644
--- a/fs/exfat/balloc.c
+++ b/fs/exfat/balloc.c
@@ -58,9 +58,8 @@ static int exfat_allocate_bitmap(struct super_block *sb,
 	need_map_size = ((EXFAT_DATA_CLUSTER_COUNT(sbi) - 1) / BITS_PER_BYTE)
 		+ 1;
 	if (need_map_size != map_size) {
-		exfat_msg(sb, KERN_ERR,
-				"bogus allocation bitmap size(need : %u, cur : %lld)",
-				need_map_size, map_size);
+		exfat_err(sb, "bogus allocation bitmap size(need : %u, cur : %lld)",
+			  need_map_size, map_size);
 		/*
 		 * Only allowed when bogus allocation
 		 * bitmap size is large
@@ -192,8 +191,7 @@ void exfat_clear_bitmap(struct inode *inode, unsigned int clu)
 			(1 << sbi->sect_per_clus_bits), GFP_NOFS, 0);
 
 		if (ret_discard == -EOPNOTSUPP) {
-			exfat_msg(sb, KERN_ERR,
-				"discard not supported by device, disabling");
+			exfat_err(sb, "discard not supported by device, disabling");
 			opts->discard = 0;
 		}
 	}
diff --git a/fs/exfat/dir.c b/fs/exfat/dir.c
index 4b91afb0f051..b5a237c33d50 100644
--- a/fs/exfat/dir.c
+++ b/fs/exfat/dir.c
@@ -137,12 +137,12 @@ static int exfat_readdir(struct inode *inode, struct exfat_dir_entry *dir_entry)
 					ep->dentry.file.create_tz,
 					ep->dentry.file.create_time,
 					ep->dentry.file.create_date,
-					ep->dentry.file.create_time_ms);
+					ep->dentry.file.create_time_cs);
 			exfat_get_entry_time(sbi, &dir_entry->mtime,
 					ep->dentry.file.modify_tz,
 					ep->dentry.file.modify_time,
 					ep->dentry.file.modify_date,
-					ep->dentry.file.modify_time_ms);
+					ep->dentry.file.modify_time_cs);
 			exfat_get_entry_time(sbi, &dir_entry->atime,
 					ep->dentry.file.access_tz,
 					ep->dentry.file.access_time,
@@ -461,12 +461,12 @@ int exfat_init_dir_entry(struct inode *inode, struct exfat_chain *p_dir,
 			&ep->dentry.file.create_tz,
 			&ep->dentry.file.create_time,
 			&ep->dentry.file.create_date,
-			&ep->dentry.file.create_time_ms);
+			&ep->dentry.file.create_time_cs);
 	exfat_set_entry_time(sbi, &ts,
 			&ep->dentry.file.modify_tz,
 			&ep->dentry.file.modify_time,
 			&ep->dentry.file.modify_date,
-			&ep->dentry.file.modify_time_ms);
+			&ep->dentry.file.modify_time_cs);
 	exfat_set_entry_time(sbi, &ts,
 			&ep->dentry.file.access_tz,
 			&ep->dentry.file.access_time,
@@ -720,9 +720,8 @@ static int exfat_dir_readahead(struct super_block *sb, sector_t sec)
 		return 0;
 
 	if (sec < sbi->data_start_sector) {
-		exfat_msg(sb, KERN_ERR,
-			"requested sector is invalid(sect:%llu, root:%llu)",
-			(unsigned long long)sec, sbi->data_start_sector);
+		exfat_err(sb, "requested sector is invalid(sect:%llu, root:%llu)",
+			  (unsigned long long)sec, sbi->data_start_sector);
 		return -EIO;
 	}
 
@@ -750,7 +749,7 @@ struct exfat_dentry *exfat_get_dentry(struct super_block *sb,
 	sector_t sec;
 
 	if (p_dir->dir == DIR_DELETED) {
-		exfat_msg(sb, KERN_ERR, "abnormal access to deleted dentry\n");
+		exfat_err(sb, "abnormal access to deleted dentry");
 		return NULL;
 	}
 
@@ -853,7 +852,7 @@ struct exfat_entry_set_cache *exfat_get_dentry_set(struct super_block *sb,
 	struct buffer_head *bh;
 
 	if (p_dir->dir == DIR_DELETED) {
-		exfat_msg(sb, KERN_ERR, "access to deleted dentry\n");
+		exfat_err(sb, "access to deleted dentry");
 		return NULL;
 	}
 
diff --git a/fs/exfat/exfat_fs.h b/fs/exfat/exfat_fs.h
index d67fb8a6f770..294aa7792bc3 100644
--- a/fs/exfat/exfat_fs.h
+++ b/fs/exfat/exfat_fs.h
@@ -492,8 +492,6 @@ int exfat_nls_to_utf16(struct super_block *sb,
 		struct exfat_uni_name *uniname, int *p_lossy);
 int exfat_create_upcase_table(struct super_block *sb);
 void exfat_free_upcase_table(struct exfat_sb_info *sbi);
-unsigned short exfat_high_surrogate(unicode_t u);
-unsigned short exfat_low_surrogate(unicode_t u);
 
 /* exfat/misc.c */
 void __exfat_fs_error(struct super_block *sb, int report, const char *fmt, ...)
@@ -505,11 +503,18 @@ void __exfat_fs_error(struct super_block *sb, int report, const char *fmt, ...)
 		fmt, ## args)
 void exfat_msg(struct super_block *sb, const char *lv, const char *fmt, ...)
 		__printf(3, 4) __cold;
+#define exfat_err(sb, fmt, ...)						\
+	exfat_msg(sb, KERN_ERR, fmt, ##__VA_ARGS__)
+#define exfat_warn(sb, fmt, ...)					\
+	exfat_msg(sb, KERN_WARNING, fmt, ##__VA_ARGS__)
+#define exfat_info(sb, fmt, ...)					\
+	exfat_msg(sb, KERN_INFO, fmt, ##__VA_ARGS__)
+
 void exfat_get_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
-		u8 tz, __le16 time, __le16 date, u8 time_ms);
+		u8 tz, __le16 time, __le16 date, u8 time_cs);
 void exfat_truncate_atime(struct timespec64 *ts);
 void exfat_set_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
-		u8 *tz, __le16 *time, __le16 *date, u8 *time_ms);
+		u8 *tz, __le16 *time, __le16 *date, u8 *time_cs);
 unsigned short exfat_calc_chksum_2byte(void *data, int len,
 		unsigned short chksum, int type);
 void exfat_update_bh(struct super_block *sb, struct buffer_head *bh, int sync);
diff --git a/fs/exfat/exfat_raw.h b/fs/exfat/exfat_raw.h
index 2a841010e649..8d6c64a7546d 100644
--- a/fs/exfat/exfat_raw.h
+++ b/fs/exfat/exfat_raw.h
@@ -136,8 +136,8 @@ struct exfat_dentry {
 			__le16 modify_date;
 			__le16 access_time;
 			__le16 access_date;
-			__u8 create_time_ms;
-			__u8 modify_time_ms;
+			__u8 create_time_cs;
+			__u8 modify_time_cs;
 			__u8 create_tz;
 			__u8 modify_tz;
 			__u8 access_tz;
diff --git a/fs/exfat/fatent.c b/fs/exfat/fatent.c
index a855b1769a96..267e5e09eb13 100644
--- a/fs/exfat/fatent.c
+++ b/fs/exfat/fatent.c
@@ -170,8 +170,7 @@ int exfat_free_cluster(struct inode *inode, struct exfat_chain *p_chain)
 
 	/* check cluster validation */
 	if (p_chain->dir < 2 && p_chain->dir >= sbi->num_clusters) {
-		exfat_msg(sb, KERN_ERR, "invalid start cluster (%u)",
-				p_chain->dir);
+		exfat_err(sb, "invalid start cluster (%u)", p_chain->dir);
 		return -EIO;
 	}
 
@@ -305,8 +304,7 @@ int exfat_zeroed_cluster(struct inode *dir, unsigned int clu)
 	return 0;
 
 release_bhs:
-	exfat_msg(sb, KERN_ERR, "failed zeroed sect %llu\n",
-		(unsigned long long)blknr);
+	exfat_err(sb, "failed zeroed sect %llu\n", (unsigned long long)blknr);
 	for (i = 0; i < n; i++)
 		bforget(bhs[i]);
 	return err;
@@ -337,9 +335,8 @@ int exfat_alloc_cluster(struct inode *inode, unsigned int num_alloc,
 	/* find new cluster */
 	if (hint_clu == EXFAT_EOF_CLUSTER) {
 		if (sbi->clu_srch_ptr < EXFAT_FIRST_CLUSTER) {
-			exfat_msg(sb, KERN_ERR,
-				"sbi->clu_srch_ptr is invalid (%u)\n",
-				sbi->clu_srch_ptr);
+			exfat_err(sb, "sbi->clu_srch_ptr is invalid (%u)\n",
+				  sbi->clu_srch_ptr);
 			sbi->clu_srch_ptr = EXFAT_FIRST_CLUSTER;
 		}
 
@@ -350,7 +347,7 @@ int exfat_alloc_cluster(struct inode *inode, unsigned int num_alloc,
 
 	/* check cluster validation */
 	if (hint_clu < EXFAT_FIRST_CLUSTER && hint_clu >= sbi->num_clusters) {
-		exfat_msg(sb, KERN_ERR, "hint_cluster is invalid (%u)\n",
+		exfat_err(sb, "hint_cluster is invalid (%u)",
 			hint_clu);
 		hint_clu = EXFAT_FIRST_CLUSTER;
 		if (p_chain->flags == ALLOC_NO_FAT_CHAIN) {
diff --git a/fs/exfat/file.c b/fs/exfat/file.c
index 4f76764165cf..9160fc070d94 100644
--- a/fs/exfat/file.c
+++ b/fs/exfat/file.c
@@ -165,7 +165,7 @@ int __exfat_truncate(struct inode *inode, loff_t new_size)
 				&ep->dentry.file.modify_tz,
 				&ep->dentry.file.modify_time,
 				&ep->dentry.file.modify_date,
-				&ep->dentry.file.modify_time_ms);
+				&ep->dentry.file.modify_time_cs);
 		ep->dentry.file.attr = cpu_to_le16(ei->attr);
 
 		/* File size should be zero if there is no cluster allocated */
diff --git a/fs/exfat/inode.c b/fs/exfat/inode.c
index 06887492f54b..a7d58adf560a 100644
--- a/fs/exfat/inode.c
+++ b/fs/exfat/inode.c
@@ -56,12 +56,12 @@ static int __exfat_write_inode(struct inode *inode, int sync)
 			&ep->dentry.file.create_tz,
 			&ep->dentry.file.create_time,
 			&ep->dentry.file.create_date,
-			&ep->dentry.file.create_time_ms);
+			&ep->dentry.file.create_time_cs);
 	exfat_set_entry_time(sbi, &inode->i_mtime,
 			&ep->dentry.file.modify_tz,
 			&ep->dentry.file.modify_time,
 			&ep->dentry.file.modify_date,
-			&ep->dentry.file.modify_time_ms);
+			&ep->dentry.file.modify_time_cs);
 	exfat_set_entry_time(sbi, &inode->i_atime,
 			&ep->dentry.file.access_tz,
 			&ep->dentry.file.access_time,
@@ -372,10 +372,9 @@ static int exfat_readpage(struct file *file, struct page *page)
 	return mpage_readpage(page, exfat_get_block);
 }
 
-static int exfat_readpages(struct file *file, struct address_space *mapping,
-		struct list_head *pages, unsigned int nr_pages)
+static void exfat_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, exfat_get_block);
+	mpage_readahead(rac, exfat_get_block);
 }
 
 static int exfat_writepage(struct page *page, struct writeback_control *wbc)
@@ -502,7 +501,7 @@ int exfat_block_truncate_page(struct inode *inode, loff_t from)
 
 static const struct address_space_operations exfat_aops = {
 	.readpage	= exfat_readpage,
-	.readpages	= exfat_readpages,
+	.readahead	= exfat_readahead,
 	.writepage	= exfat_writepage,
 	.writepages	= exfat_writepages,
 	.write_begin	= exfat_write_begin,
diff --git a/fs/exfat/misc.c b/fs/exfat/misc.c
index ebd2cbe3cbc1..ab7f88b1f6d3 100644
--- a/fs/exfat/misc.c
+++ b/fs/exfat/misc.c
@@ -32,7 +32,7 @@ void __exfat_fs_error(struct super_block *sb, int report, const char *fmt, ...)
 		va_start(args, fmt);
 		vaf.fmt = fmt;
 		vaf.va = &args;
-		exfat_msg(sb, KERN_ERR, "error, %pV\n", &vaf);
+		exfat_err(sb, "error, %pV", &vaf);
 		va_end(args);
 	}
 
@@ -41,7 +41,7 @@ void __exfat_fs_error(struct super_block *sb, int report, const char *fmt, ...)
 			sb->s_id);
 	} else if (opts->errors == EXFAT_ERRORS_RO && !sb_rdonly(sb)) {
 		sb->s_flags |= SB_RDONLY;
-		exfat_msg(sb, KERN_ERR, "Filesystem has been set read-only");
+		exfat_err(sb, "Filesystem has been set read-only");
 	}
 }
 
@@ -75,7 +75,7 @@ static void exfat_adjust_tz(struct timespec64 *ts, u8 tz_off)
 
 /* Convert a EXFAT time/date pair to a UNIX date (seconds since 1 1 70). */
 void exfat_get_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
-		u8 tz, __le16 time, __le16 date, u8 time_ms)
+		u8 tz, __le16 time, __le16 date, u8 time_cs)
 {
 	u16 t = le16_to_cpu(time);
 	u16 d = le16_to_cpu(date);
@@ -84,10 +84,10 @@ void exfat_get_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
 			      t >> 11, (t >> 5) & 0x003F, (t & 0x001F) << 1);
 
 
-	/* time_ms field represent 0 ~ 199(1990 ms) */
-	if (time_ms) {
-		ts->tv_sec += time_ms / 100;
-		ts->tv_nsec = (time_ms % 100) * 10 * NSEC_PER_MSEC;
+	/* time_cs field represent 0 ~ 199cs(1990 ms) */
+	if (time_cs) {
+		ts->tv_sec += time_cs / 100;
+		ts->tv_nsec = (time_cs % 100) * 10 * NSEC_PER_MSEC;
 	} else
 		ts->tv_nsec = 0;
 
@@ -101,7 +101,7 @@ void exfat_get_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
 
 /* Convert linear UNIX date to a EXFAT time/date pair. */
 void exfat_set_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
-		u8 *tz, __le16 *time, __le16 *date, u8 *time_ms)
+		u8 *tz, __le16 *time, __le16 *date, u8 *time_cs)
 {
 	struct tm tm;
 	u16 t, d;
@@ -113,9 +113,9 @@ void exfat_set_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
 	*time = cpu_to_le16(t);
 	*date = cpu_to_le16(d);
 
-	/* time_ms field represent 0 ~ 199(1990 ms) */
-	if (time_ms)
-		*time_ms = (tm.tm_sec & 1) * 100 +
+	/* time_cs field represent 0 ~ 199cs(1990 ms) */
+	if (time_cs)
+		*time_cs = (tm.tm_sec & 1) * 100 +
 			ts->tv_nsec / (10 * NSEC_PER_MSEC);
 
 	/*
diff --git a/fs/exfat/namei.c b/fs/exfat/namei.c
index b72d782568b8..c241dd177f1a 100644
--- a/fs/exfat/namei.c
+++ b/fs/exfat/namei.c
@@ -147,16 +147,10 @@ static int exfat_utf8_d_hash(const struct dentry *dentry, struct qstr *qstr)
 			return charlen;
 
 		/*
-		 * Convert to UTF-16: code points above U+FFFF are encoded as
-		 * surrogate pairs.
 		 * exfat_toupper() works only for code points up to the U+FFFF.
 		 */
-		if (u > 0xFFFF) {
-			hash = partial_name_hash(exfat_high_surrogate(u), hash);
-			hash = partial_name_hash(exfat_low_surrogate(u), hash);
-		} else {
-			hash = partial_name_hash(exfat_toupper(sb, u), hash);
-		}
+		hash = partial_name_hash(u <= 0xFFFF ? exfat_toupper(sb, u) : u,
+					 hash);
 	}
 
 	qstr->hash = end_name_hash(hash);
@@ -185,14 +179,9 @@ static int exfat_utf8_d_cmp(const struct dentry *dentry, unsigned int len,
 		if (u_a <= 0xFFFF && u_b <= 0xFFFF) {
 			if (exfat_toupper(sb, u_a) != exfat_toupper(sb, u_b))
 				return 1;
-		} else if (u_a > 0xFFFF && u_b > 0xFFFF) {
-			if (exfat_low_surrogate(u_a) !=
-					exfat_low_surrogate(u_b) ||
-			    exfat_high_surrogate(u_a) !=
-					exfat_high_surrogate(u_b))
-				return 1;
 		} else {
-			return 1;
+			if (u_a != u_b)
+				return 1;
 		}
 	}
 
@@ -699,12 +688,12 @@ static int exfat_find(struct inode *dir, struct qstr *qname,
 				ep->dentry.file.create_tz,
 				ep->dentry.file.create_time,
 				ep->dentry.file.create_date,
-				ep->dentry.file.create_time_ms);
+				ep->dentry.file.create_time_cs);
 		exfat_get_entry_time(sbi, &info->mtime,
 				ep->dentry.file.modify_tz,
 				ep->dentry.file.modify_time,
 				ep->dentry.file.modify_date,
-				ep->dentry.file.modify_time_ms);
+				ep->dentry.file.modify_time_cs);
 		exfat_get_entry_time(sbi, &info->atime,
 				ep->dentry.file.access_tz,
 				ep->dentry.file.access_time,
@@ -777,8 +766,8 @@ static struct dentry *exfat_lookup(struct inode *dir, struct dentry *dentry,
 		if (d_unhashed(alias)) {
 			WARN_ON(alias->d_name.hash_len !=
 				dentry->d_name.hash_len);
-			exfat_msg(sb, KERN_INFO,
-				"rehashed a dentry(%p) in read lookup", alias);
+			exfat_info(sb, "rehashed a dentry(%p) in read lookup",
+				   alias);
 			d_drop(dentry);
 			d_rehash(alias);
 		} else if (!S_ISDIR(i_mode)) {
@@ -823,7 +812,7 @@ static int exfat_unlink(struct inode *dir, struct dentry *dentry)
 	exfat_chain_dup(&cdir, &ei->dir);
 	entry = ei->entry;
 	if (ei->dir.dir == DIR_DELETED) {
-		exfat_msg(sb, KERN_ERR, "abnormal access to deleted dentry");
+		exfat_err(sb, "abnormal access to deleted dentry");
 		err = -ENOENT;
 		goto unlock;
 	}
@@ -978,7 +967,7 @@ static int exfat_rmdir(struct inode *dir, struct dentry *dentry)
 	entry = ei->entry;
 
 	if (ei->dir.dir == DIR_DELETED) {
-		exfat_msg(sb, KERN_ERR, "abnormal access to deleted dentry");
+		exfat_err(sb, "abnormal access to deleted dentry");
 		err = -ENOENT;
 		goto unlock;
 	}
@@ -990,9 +979,8 @@ static int exfat_rmdir(struct inode *dir, struct dentry *dentry)
 	err = exfat_check_dir_empty(sb, &clu_to_free);
 	if (err) {
 		if (err == -EIO)
-			exfat_msg(sb, KERN_ERR,
-				"failed to exfat_check_dir_empty : err(%d)",
-				err);
+			exfat_err(sb, "failed to exfat_check_dir_empty : err(%d)",
+				  err);
 		goto unlock;
 	}
 
@@ -1013,9 +1001,7 @@ static int exfat_rmdir(struct inode *dir, struct dentry *dentry)
 
 	err = exfat_remove_entries(dir, &cdir, entry, 0, num_entries);
 	if (err) {
-		exfat_msg(sb, KERN_ERR,
-				"failed to exfat_remove_entries : err(%d)",
-				err);
+		exfat_err(sb, "failed to exfat_remove_entries : err(%d)", err);
 		goto unlock;
 	}
 	ei->dir.dir = DIR_DELETED;
@@ -1244,8 +1230,7 @@ static int __exfat_rename(struct inode *old_parent_inode,
 		return -EINVAL;
 
 	if (ei->dir.dir == DIR_DELETED) {
-		exfat_msg(sb, KERN_ERR,
-				"abnormal access to deleted source dentry");
+		exfat_err(sb, "abnormal access to deleted source dentry");
 		return -ENOENT;
 	}
 
@@ -1267,8 +1252,7 @@ static int __exfat_rename(struct inode *old_parent_inode,
 		new_ei = EXFAT_I(new_inode);
 
 		if (new_ei->dir.dir == DIR_DELETED) {
-			exfat_msg(sb, KERN_ERR,
-				"abnormal access to deleted target dentry");
+			exfat_err(sb, "abnormal access to deleted target dentry");
 			goto out;
 		}
 
@@ -1430,8 +1414,7 @@ static int exfat_rename(struct inode *old_dir, struct dentry *old_dentry,
 			if (S_ISDIR(new_inode->i_mode))
 				drop_nlink(new_inode);
 		} else {
-			exfat_msg(sb, KERN_WARNING,
-					"abnormal access to an inode dropped");
+			exfat_warn(sb, "abnormal access to an inode dropped");
 			WARN_ON(new_inode->i_nlink == 0);
 		}
 		new_inode->i_ctime = EXFAT_I(new_inode)->i_crtime =
diff --git a/fs/exfat/nls.c b/fs/exfat/nls.c
index 6d1c3ae130ff..1ebda90cbdd7 100644
--- a/fs/exfat/nls.c
+++ b/fs/exfat/nls.c
@@ -503,16 +503,14 @@ static int exfat_utf8_to_utf16(struct super_block *sb,
 	unilen = utf8s_to_utf16s(p_cstring, len, UTF16_HOST_ENDIAN,
 			(wchar_t *)uniname, MAX_NAME_LENGTH + 2);
 	if (unilen < 0) {
-		exfat_msg(sb, KERN_ERR,
-			"failed to %s (err : %d) nls len : %d",
-			__func__, unilen, len);
+		exfat_err(sb, "failed to %s (err : %d) nls len : %d",
+			  __func__, unilen, len);
 		return unilen;
 	}
 
 	if (unilen > MAX_NAME_LENGTH) {
-		exfat_msg(sb, KERN_ERR,
-			"failed to %s (estr:ENAMETOOLONG) nls len : %d, unilen : %d > %d",
-			__func__, len, unilen, MAX_NAME_LENGTH);
+		exfat_err(sb, "failed to %s (estr:ENAMETOOLONG) nls len : %d, unilen : %d > %d",
+			  __func__, len, unilen, MAX_NAME_LENGTH);
 		return -ENAMETOOLONG;
 	}
 
@@ -537,22 +535,9 @@ static int exfat_utf8_to_utf16(struct super_block *sb,
 	return unilen;
 }
 
-#define PLANE_SIZE	0x00010000
 #define SURROGATE_MASK	0xfffff800
 #define SURROGATE_PAIR	0x0000d800
 #define SURROGATE_LOW	0x00000400
-#define SURROGATE_BITS	0x000003ff
-
-unsigned short exfat_high_surrogate(unicode_t u)
-{
-	return ((u - PLANE_SIZE) >> 10) + SURROGATE_PAIR;
-}
-
-unsigned short exfat_low_surrogate(unicode_t u)
-{
-	return ((u - PLANE_SIZE) & SURROGATE_BITS) | SURROGATE_PAIR |
-		SURROGATE_LOW;
-}
 
 static int __exfat_utf16_to_nls(struct super_block *sb,
 		struct exfat_uni_name *p_uniname, unsigned char *p_cstring,
@@ -687,9 +672,8 @@ static int exfat_load_upcase_table(struct super_block *sb,
 
 		bh = sb_bread(sb, sector);
 		if (!bh) {
-			exfat_msg(sb, KERN_ERR,
-				"failed to read sector(0x%llx)\n",
-				(unsigned long long)sector);
+			exfat_err(sb, "failed to read sector(0x%llx)\n",
+				  (unsigned long long)sector);
 			ret = -EIO;
 			goto free_table;
 		}
@@ -722,9 +706,8 @@ static int exfat_load_upcase_table(struct super_block *sb,
 	if (index >= 0xFFFF && utbl_checksum == checksum)
 		return 0;
 
-	exfat_msg(sb, KERN_ERR,
-			"failed to load upcase table (idx : 0x%08x, chksum : 0x%08x, utbl_chksum : 0x%08x)\n",
-			index, checksum, utbl_checksum);
+	exfat_err(sb, "failed to load upcase table (idx : 0x%08x, chksum : 0x%08x, utbl_chksum : 0x%08x)",
+		  index, checksum, utbl_checksum);
 	ret = -EINVAL;
 free_table:
 	exfat_free_upcase_table(sbi);
diff --git a/fs/exfat/super.c b/fs/exfat/super.c
index 0565d5539d57..4e5ffe54c395 100644
--- a/fs/exfat/super.c
+++ b/fs/exfat/super.c
@@ -102,7 +102,7 @@ int exfat_set_vol_flags(struct super_block *sb, unsigned short new_flag)
 {
 	struct exfat_sb_info *sbi = EXFAT_SB(sb);
 	struct pbr64 *bpb = (struct pbr64 *)sbi->pbr_bh->b_data;
-	bool sync = 0;
+	bool sync;
 
 	/* flags are not changed */
 	if (sbi->vol_flag == new_flag)
@@ -357,15 +357,13 @@ static struct pbr *exfat_read_pbr_with_logical_sector(struct super_block *sb)
 
 	if (!is_power_of_2(logical_sect) ||
 	    logical_sect < 512 || logical_sect > 4096) {
-		exfat_msg(sb, KERN_ERR, "bogus logical sector size %u",
-				logical_sect);
+		exfat_err(sb, "bogus logical sector size %u", logical_sect);
 		return NULL;
 	}
 
 	if (logical_sect < sb->s_blocksize) {
-		exfat_msg(sb, KERN_ERR,
-			"logical sector size too small for device (logical sector size = %u)",
-			logical_sect);
+		exfat_err(sb, "logical sector size too small for device (logical sector size = %u)",
+			  logical_sect);
 		return NULL;
 	}
 
@@ -374,15 +372,14 @@ static struct pbr *exfat_read_pbr_with_logical_sector(struct super_block *sb)
 		sbi->pbr_bh = NULL;
 
 		if (!sb_set_blocksize(sb, logical_sect)) {
-			exfat_msg(sb, KERN_ERR,
-				"unable to set blocksize %u", logical_sect);
+			exfat_err(sb, "unable to set blocksize %u",
+				  logical_sect);
 			return NULL;
 		}
 		sbi->pbr_bh = sb_bread(sb, 0);
 		if (!sbi->pbr_bh) {
-			exfat_msg(sb, KERN_ERR,
-				"unable to read boot sector (logical sector size = %lu)",
-				sb->s_blocksize);
+			exfat_err(sb, "unable to read boot sector (logical sector size = %lu)",
+				  sb->s_blocksize);
 			return NULL;
 		}
 
@@ -405,7 +402,7 @@ static int __exfat_fill_super(struct super_block *sb)
 	/* read boot sector */
 	sbi->pbr_bh = sb_bread(sb, 0);
 	if (!sbi->pbr_bh) {
-		exfat_msg(sb, KERN_ERR, "unable to read boot sector");
+		exfat_err(sb, "unable to read boot sector");
 		return -EIO;
 	}
 
@@ -414,7 +411,7 @@ static int __exfat_fill_super(struct super_block *sb)
 
 	/* check the validity of PBR */
 	if (le16_to_cpu((p_pbr->signature)) != PBR_SIGNATURE) {
-		exfat_msg(sb, KERN_ERR, "invalid boot record signature");
+		exfat_err(sb, "invalid boot record signature");
 		ret = -EINVAL;
 		goto free_bh;
 	}
@@ -439,7 +436,7 @@ static int __exfat_fill_super(struct super_block *sb)
 
 	p_bpb = (struct pbr64 *)p_pbr;
 	if (!p_bpb->bsx.num_fats) {
-		exfat_msg(sb, KERN_ERR, "bogus number of FAT structure");
+		exfat_err(sb, "bogus number of FAT structure");
 		ret = -EINVAL;
 		goto free_bh;
 	}
@@ -469,8 +466,7 @@ static int __exfat_fill_super(struct super_block *sb)
 
 	if (le16_to_cpu(p_bpb->bsx.vol_flags) & VOL_DIRTY) {
 		sbi->vol_flag |= VOL_DIRTY;
-		exfat_msg(sb, KERN_WARNING,
-			"Volume was not properly unmounted. Some data may be corrupt. Please run fsck.");
+		exfat_warn(sb, "Volume was not properly unmounted. Some data may be corrupt. Please run fsck.");
 	}
 
 	/* exFAT file size is limited by a disk volume size */
@@ -479,19 +475,19 @@ static int __exfat_fill_super(struct super_block *sb)
 
 	ret = exfat_create_upcase_table(sb);
 	if (ret) {
-		exfat_msg(sb, KERN_ERR, "failed to load upcase table");
+		exfat_err(sb, "failed to load upcase table");
 		goto free_bh;
 	}
 
 	ret = exfat_load_bitmap(sb);
 	if (ret) {
-		exfat_msg(sb, KERN_ERR, "failed to load alloc-bitmap");
+		exfat_err(sb, "failed to load alloc-bitmap");
 		goto free_upcase_table;
 	}
 
 	ret = exfat_count_used_clusters(sb, &sbi->used_clusters);
 	if (ret) {
-		exfat_msg(sb, KERN_ERR, "failed to scan clusters");
+		exfat_err(sb, "failed to scan clusters");
 		goto free_alloc_bitmap;
 	}
 
@@ -520,8 +516,7 @@ static int exfat_fill_super(struct super_block *sb, struct fs_context *fc)
 		struct request_queue *q = bdev_get_queue(sb->s_bdev);
 
 		if (!blk_queue_discard(q)) {
-			exfat_msg(sb, KERN_WARNING,
-				"mounting with \"discard\" option, but the device does not support discard");
+			exfat_warn(sb, "mounting with \"discard\" option, but the device does not support discard");
 			opts->discard = 0;
 		}
 	}
@@ -536,7 +531,7 @@ static int exfat_fill_super(struct super_block *sb, struct fs_context *fc)
 
 	err = __exfat_fill_super(sb);
 	if (err) {
-		exfat_msg(sb, KERN_ERR, "failed to recognize exfat type");
+		exfat_err(sb, "failed to recognize exfat type");
 		goto check_nls_io;
 	}
 
@@ -548,8 +543,8 @@ static int exfat_fill_super(struct super_block *sb, struct fs_context *fc)
 	else {
 		sbi->nls_io = load_nls(sbi->options.iocharset);
 		if (!sbi->nls_io) {
-			exfat_msg(sb, KERN_ERR, "IO charset %s not found",
-					sbi->options.iocharset);
+			exfat_err(sb, "IO charset %s not found",
+				  sbi->options.iocharset);
 			err = -EINVAL;
 			goto free_table;
 		}
@@ -562,7 +557,7 @@ static int exfat_fill_super(struct super_block *sb, struct fs_context *fc)
 
 	root_inode = new_inode(sb);
 	if (!root_inode) {
-		exfat_msg(sb, KERN_ERR, "failed to allocate root inode.");
+		exfat_err(sb, "failed to allocate root inode");
 		err = -ENOMEM;
 		goto free_table;
 	}
@@ -571,7 +566,7 @@ static int exfat_fill_super(struct super_block *sb, struct fs_context *fc)
 	inode_set_iversion(root_inode, 1);
 	err = exfat_read_root(root_inode);
 	if (err) {
-		exfat_msg(sb, KERN_ERR, "failed to initialize root inode.");
+		exfat_err(sb, "failed to initialize root inode");
 		goto put_inode;
 	}
 
@@ -580,7 +575,7 @@ static int exfat_fill_super(struct super_block *sb, struct fs_context *fc)
 
 	sb->s_root = d_make_root(root_inode);
 	if (!sb->s_root) {
-		exfat_msg(sb, KERN_ERR, "failed to get the root dentry");
+		exfat_err(sb, "failed to get the root dentry");
 		err = -ENOMEM;
 		goto put_inode;
 	}
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index c885cf7d724b..2875c0a705b5 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -877,11 +877,9 @@ static int ext2_readpage(struct file *file, struct page *page)
 	return mpage_readpage(page, ext2_get_block);
 }
 
-static int
-ext2_readpages(struct file *file, struct address_space *mapping,
-		struct list_head *pages, unsigned nr_pages)
+static void ext2_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, ext2_get_block);
+	mpage_readahead(rac, ext2_get_block);
 }
 
 static int
@@ -967,7 +965,7 @@ ext2_dax_writepages(struct address_space *mapping, struct writeback_control *wbc
 
 const struct address_space_operations ext2_aops = {
 	.readpage		= ext2_readpage,
-	.readpages		= ext2_readpages,
+	.readahead		= ext2_readahead,
 	.writepage		= ext2_writepage,
 	.write_begin		= ext2_write_begin,
 	.write_end		= ext2_write_end,
@@ -981,7 +979,7 @@ const struct address_space_operations ext2_aops = {
 
 const struct address_space_operations ext2_nobh_aops = {
 	.readpage		= ext2_readpage,
-	.readpages		= ext2_readpages,
+	.readahead		= ext2_readahead,
 	.writepage		= ext2_nobh_writepage,
 	.write_begin		= ext2_nobh_write_begin,
 	.write_end		= nobh_write_end,
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 91eb4381cae5..a47a98942626 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -3316,9 +3316,8 @@ static inline void ext4_set_de_type(struct super_block *sb,
 }
 
 /* readpages.c */
-extern int ext4_mpage_readpages(struct address_space *mapping,
-				struct list_head *pages, struct page *page,
-				unsigned nr_pages, bool is_readahead);
+extern int ext4_mpage_readpages(struct inode *inode,
+		struct readahead_control *rac, struct page *page);
 extern int __init ext4_init_post_read_processing(void);
 extern void ext4_exit_post_read_processing(void);
 
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 2a4aae6acdcb..52be85f96159 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3224,23 +3224,20 @@ static int ext4_readpage(struct file *file, struct page *page)
 		ret = ext4_readpage_inline(inode, page);
 
 	if (ret == -EAGAIN)
-		return ext4_mpage_readpages(page->mapping, NULL, page, 1,
-						false);
+		return ext4_mpage_readpages(inode, NULL, page);
 
 	return ret;
 }
 
-static int
-ext4_readpages(struct file *file, struct address_space *mapping,
-		struct list_head *pages, unsigned nr_pages)
+static void ext4_readahead(struct readahead_control *rac)
 {
-	struct inode *inode = mapping->host;
+	struct inode *inode = rac->mapping->host;
 
-	/* If the file has inline data, no need to do readpages. */
+	/* If the file has inline data, no need to do readahead. */
 	if (ext4_has_inline_data(inode))
-		return 0;
+		return;
 
-	return ext4_mpage_readpages(mapping, pages, NULL, nr_pages, true);
+	ext4_mpage_readpages(inode, rac, NULL);
 }
 
 static void ext4_invalidatepage(struct page *page, unsigned int offset,
@@ -3605,7 +3602,7 @@ static int ext4_set_page_dirty(struct page *page)
 
 static const struct address_space_operations ext4_aops = {
 	.readpage		= ext4_readpage,
-	.readpages		= ext4_readpages,
+	.readahead		= ext4_readahead,
 	.writepage		= ext4_writepage,
 	.writepages		= ext4_writepages,
 	.write_begin		= ext4_write_begin,
@@ -3622,7 +3619,7 @@ static const struct address_space_operations ext4_aops = {
 
 static const struct address_space_operations ext4_journalled_aops = {
 	.readpage		= ext4_readpage,
-	.readpages		= ext4_readpages,
+	.readahead		= ext4_readahead,
 	.writepage		= ext4_writepage,
 	.writepages		= ext4_writepages,
 	.write_begin		= ext4_write_begin,
@@ -3638,7 +3635,7 @@ static const struct address_space_operations ext4_journalled_aops = {
 
 static const struct address_space_operations ext4_da_aops = {
 	.readpage		= ext4_readpage,
-	.readpages		= ext4_readpages,
+	.readahead		= ext4_readahead,
 	.writepage		= ext4_writepage,
 	.writepages		= ext4_writepages,
 	.write_begin		= ext4_da_write_begin,
diff --git a/fs/ext4/readpage.c b/fs/ext4/readpage.c
index c1769afbf799..5761e9961682 100644
--- a/fs/ext4/readpage.c
+++ b/fs/ext4/readpage.c
@@ -7,8 +7,8 @@
  *
  * This was originally taken from fs/mpage.c
  *
- * The intent is the ext4_mpage_readpages() function here is intended
- * to replace mpage_readpages() in the general case, not just for
+ * The ext4_mpage_readpages() function here is intended to
+ * replace mpage_readahead() in the general case, not just for
  * encrypted files.  It has some limitations (see below), where it
  * will fall back to read_block_full_page(), but these limitations
  * should only be hit when page_size != block_size.
@@ -221,14 +221,12 @@ static inline loff_t ext4_readpage_limit(struct inode *inode)
 	return i_size_read(inode);
 }
 
-int ext4_mpage_readpages(struct address_space *mapping,
-			 struct list_head *pages, struct page *page,
-			 unsigned nr_pages, bool is_readahead)
+int ext4_mpage_readpages(struct inode *inode,
+		struct readahead_control *rac, struct page *page)
 {
 	struct bio *bio = NULL;
 	sector_t last_block_in_bio = 0;
 
-	struct inode *inode = mapping->host;
 	const unsigned blkbits = inode->i_blkbits;
 	const unsigned blocks_per_page = PAGE_SIZE >> blkbits;
 	const unsigned blocksize = 1 << blkbits;
@@ -241,6 +239,7 @@ int ext4_mpage_readpages(struct address_space *mapping,
 	int length;
 	unsigned relative_block = 0;
 	struct ext4_map_blocks map;
+	unsigned int nr_pages = rac ? readahead_count(rac) : 1;
 
 	map.m_pblk = 0;
 	map.m_lblk = 0;
@@ -251,14 +250,9 @@ int ext4_mpage_readpages(struct address_space *mapping,
 		int fully_mapped = 1;
 		unsigned first_hole = blocks_per_page;
 
-		if (pages) {
-			page = lru_to_page(pages);
-
+		if (rac) {
+			page = readahead_page(rac);
 			prefetchw(&page->flags);
-			list_del(&page->lru);
-			if (add_to_page_cache_lru(page, mapping, page->index,
-				  readahead_gfp_mask(mapping)))
-				goto next_page;
 		}
 
 		if (page_has_buffers(page))
@@ -381,7 +375,7 @@ int ext4_mpage_readpages(struct address_space *mapping,
 			bio->bi_iter.bi_sector = blocks[0] << (blkbits - 9);
 			bio->bi_end_io = mpage_end_io;
 			bio_set_op_attrs(bio, REQ_OP_READ,
-						is_readahead ? REQ_RAHEAD : 0);
+						rac ? REQ_RAHEAD : 0);
 		}
 
 		length = first_hole << blkbits;
@@ -406,10 +400,9 @@ int ext4_mpage_readpages(struct address_space *mapping,
 		else
 			unlock_page(page);
 	next_page:
-		if (pages)
+		if (rac)
 			put_page(page);
 	}
-	BUG_ON(pages && !list_empty(pages));
 	if (bio)
 		submit_bio(bio);
 	return 0;
diff --git a/fs/ext4/verity.c b/fs/ext4/verity.c
index dc5ec724d889..dec1244dd062 100644
--- a/fs/ext4/verity.c
+++ b/fs/ext4/verity.c
@@ -342,37 +342,6 @@ static int ext4_get_verity_descriptor(struct inode *inode, void *buf,
 	return desc_size;
 }
 
-/*
- * Prefetch some pages from the file's Merkle tree.
- *
- * This is basically a stripped-down version of __do_page_cache_readahead()
- * which works on pages past i_size.
- */
-static void ext4_merkle_tree_readahead(struct address_space *mapping,
-				       pgoff_t start_index, unsigned long count)
-{
-	LIST_HEAD(pages);
-	unsigned int nr_pages = 0;
-	struct page *page;
-	pgoff_t index;
-	struct blk_plug plug;
-
-	for (index = start_index; index < start_index + count; index++) {
-		page = xa_load(&mapping->i_pages, index);
-		if (!page || xa_is_value(page)) {
-			page = __page_cache_alloc(readahead_gfp_mask(mapping));
-			if (!page)
-				break;
-			page->index = index;
-			list_add(&page->lru, &pages);
-			nr_pages++;
-		}
-	}
-	blk_start_plug(&plug);
-	ext4_mpage_readpages(mapping, &pages, NULL, nr_pages, true);
-	blk_finish_plug(&plug);
-}
-
 static struct page *ext4_read_merkle_tree_page(struct inode *inode,
 					       pgoff_t index,
 					       unsigned long num_ra_pages)
@@ -386,8 +355,8 @@ static struct page *ext4_read_merkle_tree_page(struct inode *inode,
 		if (page)
 			put_page(page);
 		else if (num_ra_pages > 1)
-			ext4_merkle_tree_readahead(inode->i_mapping, index,
-						   num_ra_pages);
+			page_cache_readahead_unbounded(inode->i_mapping, NULL,
+					index, num_ra_pages, 0);
 		page = read_mapping_page(inode->i_mapping, index, NULL);
 	}
 	return page;
diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index 852890b72d6a..5ba649e17c72 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -86,6 +86,8 @@ static struct page *__get_meta_page(struct f2fs_sb_info *sbi, pgoff_t index,
 		return ERR_PTR(err);
 	}
 
+	f2fs_update_iostat(sbi, FS_META_READ_IO, F2FS_BLKSIZE);
+
 	lock_page(page);
 	if (unlikely(page->mapping != mapping)) {
 		f2fs_put_page(page, 1);
@@ -220,6 +222,7 @@ int f2fs_ra_meta_pages(struct f2fs_sb_info *sbi, block_t start, int nrpages,
 		.is_por = (type == META_POR),
 	};
 	struct blk_plug plug;
+	int err;
 
 	if (unlikely(type == META_POR))
 		fio.op_flags &= ~REQ_META;
@@ -263,8 +266,11 @@ int f2fs_ra_meta_pages(struct f2fs_sb_info *sbi, block_t start, int nrpages,
 		}
 
 		fio.page = page;
-		f2fs_submit_page_bio(&fio);
-		f2fs_put_page(page, 0);
+		err = f2fs_submit_page_bio(&fio);
+		f2fs_put_page(page, err ? 1 : 0);
+
+		if (!err)
+			f2fs_update_iostat(sbi, FS_META_READ_IO, F2FS_BLKSIZE);
 	}
 out:
 	blk_finish_plug(&plug);
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index df7b2d15eacd..26b071afe48a 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -985,7 +985,7 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 	loff_t psize;
 	int i, err;
 
-	if (!f2fs_trylock_op(sbi))
+	if (!IS_NOQUOTA(inode) && !f2fs_trylock_op(sbi))
 		return -EAGAIN;
 
 	set_new_dnode(&dn, cc->inode, NULL, NULL, 0);
@@ -1092,7 +1092,8 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 		set_inode_flag(inode, FI_FIRST_BLOCK_WRITTEN);
 
 	f2fs_put_dnode(&dn);
-	f2fs_unlock_op(sbi);
+	if (!IS_NOQUOTA(inode))
+		f2fs_unlock_op(sbi);
 
 	spin_lock(&fi->i_size_lock);
 	if (fi->last_disk_size < psize)
@@ -1118,7 +1119,8 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 out_put_dnode:
 	f2fs_put_dnode(&dn);
 out_unlock_op:
-	f2fs_unlock_op(sbi);
+	if (!IS_NOQUOTA(inode))
+		f2fs_unlock_op(sbi);
 	return -EAGAIN;
 }
 
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index cdf2f626bea7..8518434cb3e9 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -513,6 +513,28 @@ void f2fs_submit_bio(struct f2fs_sb_info *sbi,
 	__submit_bio(sbi, bio, type);
 }
 
+static void __attach_data_io_flag(struct f2fs_io_info *fio)
+{
+	struct f2fs_sb_info *sbi = fio->sbi;
+	unsigned int temp_mask = (1 << NR_TEMP_TYPE) - 1;
+	unsigned int fua_flag = sbi->data_io_flag & temp_mask;
+	unsigned int meta_flag = (sbi->data_io_flag >> NR_TEMP_TYPE) &
+								temp_mask;
+	/*
+	 * data io flag bits per temp:
+	 *      REQ_META     |      REQ_FUA      |
+	 *    5 |    4 |   3 |    2 |    1 |   0 |
+	 * Cold | Warm | Hot | Cold | Warm | Hot |
+	 */
+	if (fio->type != DATA)
+		return;
+
+	if ((1 << fio->temp) & meta_flag)
+		fio->op_flags |= REQ_META;
+	if ((1 << fio->temp) & fua_flag)
+		fio->op_flags |= REQ_FUA;
+}
+
 static void __submit_merged_bio(struct f2fs_bio_info *io)
 {
 	struct f2fs_io_info *fio = &io->fio;
@@ -520,6 +542,7 @@ static void __submit_merged_bio(struct f2fs_bio_info *io)
 	if (!io->bio)
 		return;
 
+	__attach_data_io_flag(fio);
 	bio_set_op_attrs(io->bio, fio->op, fio->op_flags);
 
 	if (is_read_io(fio->op))
@@ -1010,6 +1033,7 @@ static int f2fs_submit_page_read(struct inode *inode, struct page *page,
 	}
 	ClearPageError(page);
 	inc_page_count(sbi, F2FS_RD_DATA);
+	f2fs_update_iostat(sbi, FS_DATA_READ_IO, F2FS_BLKSIZE);
 	__submit_bio(sbi, bio, DATA);
 	return 0;
 }
@@ -2015,6 +2039,7 @@ static int f2fs_read_single_page(struct inode *inode, struct page *page,
 		goto submit_and_realloc;
 
 	inc_page_count(F2FS_I_SB(inode), F2FS_RD_DATA);
+	f2fs_update_iostat(F2FS_I_SB(inode), FS_DATA_READ_IO, F2FS_BLKSIZE);
 	ClearPageError(page);
 	*last_block_in_bio = block_nr;
 	goto out;
@@ -2150,6 +2175,7 @@ int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
 			goto submit_and_realloc;
 
 		inc_page_count(sbi, F2FS_RD_DATA);
+		f2fs_update_iostat(sbi, FS_DATA_READ_IO, F2FS_BLKSIZE);
 		ClearPageError(page);
 		*last_block_in_bio = blkaddr;
 	}
@@ -2177,13 +2203,11 @@ int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
  * use ->readpage() or do the necessary surgery to decouple ->readpages()
  * from read-ahead.
  */
-int f2fs_mpage_readpages(struct address_space *mapping,
-			struct list_head *pages, struct page *page,
-			unsigned nr_pages, bool is_readahead)
+static int f2fs_mpage_readpages(struct inode *inode,
+		struct readahead_control *rac, struct page *page)
 {
 	struct bio *bio = NULL;
 	sector_t last_block_in_bio = 0;
-	struct inode *inode = mapping->host;
 	struct f2fs_map_blocks map;
 #ifdef CONFIG_F2FS_FS_COMPRESSION
 	struct compress_ctx cc = {
@@ -2197,6 +2221,7 @@ int f2fs_mpage_readpages(struct address_space *mapping,
 		.nr_cpages = 0,
 	};
 #endif
+	unsigned nr_pages = rac ? readahead_count(rac) : 1;
 	unsigned max_nr_pages = nr_pages;
 	int ret = 0;
 
@@ -2210,15 +2235,9 @@ int f2fs_mpage_readpages(struct address_space *mapping,
 	map.m_may_create = false;
 
 	for (; nr_pages; nr_pages--) {
-		if (pages) {
-			page = list_last_entry(pages, struct page, lru);
-
+		if (rac) {
+			page = readahead_page(rac);
 			prefetchw(&page->flags);
-			list_del(&page->lru);
-			if (add_to_page_cache_lru(page, mapping,
-						  page_index(page),
-						  readahead_gfp_mask(mapping)))
-				goto next_page;
 		}
 
 #ifdef CONFIG_F2FS_FS_COMPRESSION
@@ -2228,7 +2247,7 @@ int f2fs_mpage_readpages(struct address_space *mapping,
 				ret = f2fs_read_multi_pages(&cc, &bio,
 							max_nr_pages,
 							&last_block_in_bio,
-							is_readahead, false);
+							rac != NULL, false);
 				f2fs_destroy_compress_ctx(&cc);
 				if (ret)
 					goto set_error_page;
@@ -2251,7 +2270,7 @@ int f2fs_mpage_readpages(struct address_space *mapping,
 #endif
 
 		ret = f2fs_read_single_page(inode, page, max_nr_pages, &map,
-					&bio, &last_block_in_bio, is_readahead);
+					&bio, &last_block_in_bio, rac);
 		if (ret) {
 #ifdef CONFIG_F2FS_FS_COMPRESSION
 set_error_page:
@@ -2260,8 +2279,10 @@ int f2fs_mpage_readpages(struct address_space *mapping,
 			zero_user_segment(page, 0, PAGE_SIZE);
 			unlock_page(page);
 		}
+#ifdef CONFIG_F2FS_FS_COMPRESSION
 next_page:
-		if (pages)
+#endif
+		if (rac)
 			put_page(page);
 
 #ifdef CONFIG_F2FS_FS_COMPRESSION
@@ -2271,16 +2292,15 @@ int f2fs_mpage_readpages(struct address_space *mapping,
 				ret = f2fs_read_multi_pages(&cc, &bio,
 							max_nr_pages,
 							&last_block_in_bio,
-							is_readahead, false);
+							rac != NULL, false);
 				f2fs_destroy_compress_ctx(&cc);
 			}
 		}
 #endif
 	}
-	BUG_ON(pages && !list_empty(pages));
 	if (bio)
 		__submit_bio(F2FS_I_SB(inode), bio, DATA);
-	return pages ? 0 : ret;
+	return ret;
 }
 
 static int f2fs_read_data_page(struct file *file, struct page *page)
@@ -2299,28 +2319,24 @@ static int f2fs_read_data_page(struct file *file, struct page *page)
 	if (f2fs_has_inline_data(inode))
 		ret = f2fs_read_inline_data(inode, page);
 	if (ret == -EAGAIN)
-		ret = f2fs_mpage_readpages(page_file_mapping(page),
-						NULL, page, 1, false);
+		ret = f2fs_mpage_readpages(inode, NULL, page);
 	return ret;
 }
 
-static int f2fs_read_data_pages(struct file *file,
-			struct address_space *mapping,
-			struct list_head *pages, unsigned nr_pages)
+static void f2fs_readahead(struct readahead_control *rac)
 {
-	struct inode *inode = mapping->host;
-	struct page *page = list_last_entry(pages, struct page, lru);
+	struct inode *inode = rac->mapping->host;
 
-	trace_f2fs_readpages(inode, page, nr_pages);
+	trace_f2fs_readpages(inode, readahead_index(rac), readahead_count(rac));
 
 	if (!f2fs_is_compress_backend_ready(inode))
-		return 0;
+		return;
 
 	/* If the file has inline data, skip readpages */
 	if (f2fs_has_inline_data(inode))
-		return 0;
+		return;
 
-	return f2fs_mpage_readpages(mapping, pages, NULL, nr_pages, true);
+	f2fs_mpage_readpages(inode, rac, NULL);
 }
 
 int f2fs_encrypt_one_page(struct f2fs_io_info *fio)
@@ -2633,8 +2649,8 @@ int f2fs_write_single_data_page(struct page *page, int *submitted,
 			f2fs_available_free_memory(sbi, BASE_CHECK))))
 		goto redirty_out;
 
-	/* Dentry blocks are controlled by checkpoint */
-	if (S_ISDIR(inode->i_mode)) {
+	/* Dentry/quota blocks are controlled by checkpoint */
+	if (S_ISDIR(inode->i_mode) || IS_NOQUOTA(inode)) {
 		fio.need_lock = LOCK_DONE;
 		err = f2fs_do_write_data_page(&fio);
 		goto done;
@@ -3503,6 +3519,9 @@ static ssize_t f2fs_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
 		} else if (err < 0) {
 			f2fs_write_failed(mapping, offset + count);
 		}
+	} else {
+		if (err > 0)
+			f2fs_update_iostat(sbi, APP_DIRECT_READ_IO, err);
 	}
 
 out:
@@ -3805,7 +3824,7 @@ static void f2fs_swap_deactivate(struct file *file)
 
 const struct address_space_operations f2fs_dblock_aops = {
 	.readpage	= f2fs_read_data_page,
-	.readpages	= f2fs_read_data_pages,
+	.readahead	= f2fs_readahead,
 	.writepage	= f2fs_write_data_page,
 	.writepages	= f2fs_write_data_pages,
 	.write_begin	= f2fs_write_begin,
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index ba470d5687fe..0f7753173e19 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -1088,8 +1088,9 @@ enum cp_reason_type {
 };
 
 enum iostat_type {
-	APP_DIRECT_IO,			/* app direct IOs */
-	APP_BUFFERED_IO,		/* app buffered IOs */
+	/* WRITE IO */
+	APP_DIRECT_IO,			/* app direct write IOs */
+	APP_BUFFERED_IO,		/* app buffered write IOs */
 	APP_WRITE_IO,			/* app write IOs */
 	APP_MAPPED_IO,			/* app mapped IOs */
 	FS_DATA_IO,			/* data IOs from kworker/fsync/reclaimer */
@@ -1100,6 +1101,17 @@ enum iostat_type {
 	FS_CP_DATA_IO,			/* data IOs from checkpoint */
 	FS_CP_NODE_IO,			/* node IOs from checkpoint */
 	FS_CP_META_IO,			/* meta IOs from checkpoint */
+
+	/* READ IO */
+	APP_DIRECT_READ_IO,		/* app direct read IOs */
+	APP_BUFFERED_READ_IO,		/* app buffered read IOs */
+	APP_READ_IO,			/* app read IOs */
+	APP_MAPPED_READ_IO,		/* app mapped read IOs */
+	FS_DATA_READ_IO,		/* data read IOs */
+	FS_NODE_READ_IO,		/* node read IOs */
+	FS_META_READ_IO,		/* meta read IOs */
+
+	/* other */
 	FS_DISCARD,			/* discard */
 	NR_IO_TYPE,
 };
@@ -1504,8 +1516,14 @@ struct f2fs_sb_info {
 
 	/* For app/fs IO statistics */
 	spinlock_t iostat_lock;
-	unsigned long long write_iostat[NR_IO_TYPE];
+	unsigned long long rw_iostat[NR_IO_TYPE];
+	unsigned long long prev_rw_iostat[NR_IO_TYPE];
 	bool iostat_enable;
+	unsigned long iostat_next_period;
+	unsigned int iostat_period_ms;
+
+	/* to attach REQ_META|REQ_FUA flags */
+	unsigned int data_io_flag;
 
 	/* For sysfs suppport */
 	struct kobject s_kobj;
@@ -2996,29 +3014,45 @@ static inline int get_inline_xattr_addrs(struct inode *inode)
 		sizeof((f2fs_inode)->field))			\
 		<= (F2FS_OLD_ATTRIBUTE_SIZE + (extra_isize)))	\
 
+#define DEFAULT_IOSTAT_PERIOD_MS	3000
+#define MIN_IOSTAT_PERIOD_MS		100
+/* maximum period of iostat tracing is 1 day */
+#define MAX_IOSTAT_PERIOD_MS		8640000
+
 static inline void f2fs_reset_iostat(struct f2fs_sb_info *sbi)
 {
 	int i;
 
 	spin_lock(&sbi->iostat_lock);
-	for (i = 0; i < NR_IO_TYPE; i++)
-		sbi->write_iostat[i] = 0;
+	for (i = 0; i < NR_IO_TYPE; i++) {
+		sbi->rw_iostat[i] = 0;
+		sbi->prev_rw_iostat[i] = 0;
+	}
 	spin_unlock(&sbi->iostat_lock);
 }
 
+extern void f2fs_record_iostat(struct f2fs_sb_info *sbi);
+
 static inline void f2fs_update_iostat(struct f2fs_sb_info *sbi,
 			enum iostat_type type, unsigned long long io_bytes)
 {
 	if (!sbi->iostat_enable)
 		return;
 	spin_lock(&sbi->iostat_lock);
-	sbi->write_iostat[type] += io_bytes;
+	sbi->rw_iostat[type] += io_bytes;
 
 	if (type == APP_WRITE_IO || type == APP_DIRECT_IO)
-		sbi->write_iostat[APP_BUFFERED_IO] =
-			sbi->write_iostat[APP_WRITE_IO] -
-			sbi->write_iostat[APP_DIRECT_IO];
+		sbi->rw_iostat[APP_BUFFERED_IO] =
+			sbi->rw_iostat[APP_WRITE_IO] -
+			sbi->rw_iostat[APP_DIRECT_IO];
+
+	if (type == APP_READ_IO || type == APP_DIRECT_READ_IO)
+		sbi->rw_iostat[APP_BUFFERED_READ_IO] =
+			sbi->rw_iostat[APP_READ_IO] -
+			sbi->rw_iostat[APP_DIRECT_READ_IO];
 	spin_unlock(&sbi->iostat_lock);
+
+	f2fs_record_iostat(sbi);
 }
 
 #define __is_large_section(sbi)		((sbi)->segs_per_sec > 1)
@@ -3373,9 +3407,6 @@ int f2fs_reserve_new_block(struct dnode_of_data *dn);
 int f2fs_get_block(struct dnode_of_data *dn, pgoff_t index);
 int f2fs_preallocate_blocks(struct kiocb *iocb, struct iov_iter *from);
 int f2fs_reserve_block(struct dnode_of_data *dn, pgoff_t index);
-int f2fs_mpage_readpages(struct address_space *mapping,
-			struct list_head *pages, struct page *page,
-			unsigned nr_pages, bool is_readahead);
 struct page *f2fs_get_read_data_page(struct inode *inode, pgoff_t index,
 			int op_flags, bool for_write);
 struct page *f2fs_find_data_page(struct inode *inode, pgoff_t index);
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 6ab8f621a3c5..a0a4413d6083 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -40,6 +40,10 @@ static vm_fault_t f2fs_filemap_fault(struct vm_fault *vmf)
 	ret = filemap_fault(vmf);
 	up_read(&F2FS_I(inode)->i_mmap_sem);
 
+	if (!ret)
+		f2fs_update_iostat(F2FS_I_SB(inode), APP_MAPPED_READ_IO,
+							F2FS_BLKSIZE);
+
 	trace_f2fs_filemap_fault(inode, vmf->pgoff, (unsigned long)ret);
 
 	return ret;
@@ -3510,11 +3514,17 @@ static ssize_t f2fs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter)
 {
 	struct file *file = iocb->ki_filp;
 	struct inode *inode = file_inode(file);
+	int ret;
 
 	if (!f2fs_is_compress_backend_ready(inode))
 		return -EOPNOTSUPP;
 
-	return generic_file_read_iter(iocb, iter);
+	ret = generic_file_read_iter(iocb, iter);
+
+	if (ret > 0)
+		f2fs_update_iostat(F2FS_I_SB(inode), APP_READ_IO, ret);
+
+	return ret;
 }
 
 static ssize_t f2fs_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 26248c8936db..28a8c79c8bdc 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -737,6 +737,9 @@ static int ra_data_block(struct inode *inode, pgoff_t index)
 		goto put_encrypted_page;
 	f2fs_put_page(fio.encrypted_page, 0);
 	f2fs_put_page(page, 1);
+
+	f2fs_update_iostat(sbi, FS_DATA_READ_IO, F2FS_BLKSIZE);
+
 	return 0;
 put_encrypted_page:
 	f2fs_put_page(fio.encrypted_page, 1);
@@ -840,6 +843,9 @@ static int move_data_block(struct inode *inode, block_t bidx,
 			f2fs_put_page(mpage, 1);
 			goto up_out;
 		}
+
+		f2fs_update_iostat(fio.sbi, FS_DATA_READ_IO, F2FS_BLKSIZE);
+
 		lock_page(mpage);
 		if (unlikely(mpage->mapping != META_MAPPING(fio.sbi) ||
 						!PageUptodate(mpage))) {
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index ecbd6bd14a49..4da0d8713df5 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -1300,7 +1300,13 @@ static int read_node_page(struct page *page, int op_flags)
 	}
 
 	fio.new_blkaddr = fio.old_blkaddr = ni.blk_addr;
-	return f2fs_submit_page_bio(&fio);
+
+	err = f2fs_submit_page_bio(&fio);
+
+	if (!err)
+		f2fs_update_iostat(sbi, FS_NODE_READ_IO, F2FS_BLKSIZE);
+
+	return err;
 }
 
 /*
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index b7a9421472a7..1c48ec866b8c 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -1029,9 +1029,9 @@ static void f2fs_submit_discard_endio(struct bio *bio)
 	struct discard_cmd *dc = (struct discard_cmd *)bio->bi_private;
 	unsigned long flags;
 
-	dc->error = blk_status_to_errno(bio->bi_status);
-
 	spin_lock_irqsave(&dc->lock, flags);
+	if (!dc->error)
+		dc->error = blk_status_to_errno(bio->bi_status);
 	dc->bio_ref--;
 	if (!dc->bio_ref && dc->state == D_SUBMIT) {
 		dc->state = D_DONE;
@@ -1101,7 +1101,6 @@ static void __init_discard_policy(struct f2fs_sb_info *sbi,
 	} else if (discard_type == DPOLICY_FSTRIM) {
 		dpolicy->io_aware = false;
 	} else if (discard_type == DPOLICY_UMOUNT) {
-		dpolicy->max_requests = UINT_MAX;
 		dpolicy->io_aware = false;
 		/* we need to issue all to keep CP_TRIMMED_FLAG */
 		dpolicy->granularity = 1;
@@ -1215,8 +1214,10 @@ static int __submit_discard_cmd(struct f2fs_sb_info *sbi,
 		len = total_len;
 	}
 
-	if (!err && len)
+	if (!err && len) {
+		dcc->undiscard_blks -= len;
 		__update_discard_tree_range(sbi, bdev, lstart, start, len);
+	}
 	return err;
 }
 
@@ -1463,6 +1464,8 @@ static unsigned int __issue_discard_cmd_orderly(struct f2fs_sb_info *sbi,
 
 	return issued;
 }
+static unsigned int __wait_all_discard_cmd(struct f2fs_sb_info *sbi,
+					struct discard_policy *dpolicy);
 
 static int __issue_discard_cmd(struct f2fs_sb_info *sbi,
 					struct discard_policy *dpolicy)
@@ -1471,12 +1474,14 @@ static int __issue_discard_cmd(struct f2fs_sb_info *sbi,
 	struct list_head *pend_list;
 	struct discard_cmd *dc, *tmp;
 	struct blk_plug plug;
-	int i, issued = 0;
+	int i, issued;
 	bool io_interrupted = false;
 
 	if (dpolicy->timeout)
 		f2fs_update_time(sbi, UMOUNT_DISCARD_TIMEOUT);
 
+retry:
+	issued = 0;
 	for (i = MAX_PLIST_NUM - 1; i >= 0; i--) {
 		if (dpolicy->timeout &&
 				f2fs_time_over(sbi, UMOUNT_DISCARD_TIMEOUT))
@@ -1523,6 +1528,11 @@ static int __issue_discard_cmd(struct f2fs_sb_info *sbi,
 			break;
 	}
 
+	if (dpolicy->type == DPOLICY_UMOUNT && issued) {
+		__wait_all_discard_cmd(sbi, dpolicy);
+		goto retry;
+	}
+
 	if (!issued && io_interrupted)
 		issued = -1;
 
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index f2dfc21c6abb..438296e17183 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -3424,6 +3424,7 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
 	/* init iostat info */
 	spin_lock_init(&sbi->iostat_lock);
 	sbi->iostat_enable = false;
+	sbi->iostat_period_ms = DEFAULT_IOSTAT_PERIOD_MS;
 
 	for (i = 0; i < NR_PAGE_TYPE; i++) {
 		int n = (i == META) ? 1: NR_TEMP_TYPE;
diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
index e3bbbef9b4f0..eaf8088548f0 100644
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -15,6 +15,7 @@
 #include "f2fs.h"
 #include "segment.h"
 #include "gc.h"
+#include <trace/events/f2fs.h>
 
 static struct proc_dir_entry *f2fs_proc_root;
 
@@ -372,7 +373,6 @@ static ssize_t __sbi_store(struct f2fs_attr *a,
 		return count;
 	}
 
-
 	if (!strcmp(a->attr.name, "iostat_enable")) {
 		sbi->iostat_enable = !!t;
 		if (!sbi->iostat_enable)
@@ -380,6 +380,15 @@ static ssize_t __sbi_store(struct f2fs_attr *a,
 		return count;
 	}
 
+	if (!strcmp(a->attr.name, "iostat_period_ms")) {
+		if (t < MIN_IOSTAT_PERIOD_MS || t > MAX_IOSTAT_PERIOD_MS)
+			return -EINVAL;
+		spin_lock(&sbi->iostat_lock);
+		sbi->iostat_period_ms = (unsigned int)t;
+		spin_unlock(&sbi->iostat_lock);
+		return count;
+	}
+
 	*ui = (unsigned int)t;
 
 	return count;
@@ -536,6 +545,7 @@ F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_idle_interval, interval_time[GC_TIME]);
 F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info,
 		umount_discard_timeout, interval_time[UMOUNT_DISCARD_TIMEOUT]);
 F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, iostat_enable, iostat_enable);
+F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, iostat_period_ms, iostat_period_ms);
 F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, readdir_ra, readdir_ra);
 F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_pin_file_thresh, gc_pin_file_threshold);
 F2FS_RW_ATTR(F2FS_SBI, f2fs_super_block, extension_list, extension_list);
@@ -543,6 +553,7 @@ F2FS_RW_ATTR(F2FS_SBI, f2fs_super_block, extension_list, extension_list);
 F2FS_RW_ATTR(FAULT_INFO_RATE, f2fs_fault_info, inject_rate, inject_rate);
 F2FS_RW_ATTR(FAULT_INFO_TYPE, f2fs_fault_info, inject_type, inject_type);
 #endif
+F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, data_io_flag, data_io_flag);
 F2FS_GENERAL_RO_ATTR(dirty_segments);
 F2FS_GENERAL_RO_ATTR(free_segments);
 F2FS_GENERAL_RO_ATTR(lifetime_write_kbytes);
@@ -615,6 +626,7 @@ static struct attribute *f2fs_attrs[] = {
 	ATTR_LIST(gc_idle_interval),
 	ATTR_LIST(umount_discard_timeout),
 	ATTR_LIST(iostat_enable),
+	ATTR_LIST(iostat_period_ms),
 	ATTR_LIST(readdir_ra),
 	ATTR_LIST(gc_pin_file_thresh),
 	ATTR_LIST(extension_list),
@@ -622,6 +634,7 @@ static struct attribute *f2fs_attrs[] = {
 	ATTR_LIST(inject_rate),
 	ATTR_LIST(inject_type),
 #endif
+	ATTR_LIST(data_io_flag),
 	ATTR_LIST(dirty_segments),
 	ATTR_LIST(free_segments),
 	ATTR_LIST(unusable),
@@ -750,6 +763,33 @@ static int __maybe_unused segment_bits_seq_show(struct seq_file *seq,
 	return 0;
 }
 
+void f2fs_record_iostat(struct f2fs_sb_info *sbi)
+{
+	unsigned long long iostat_diff[NR_IO_TYPE];
+	int i;
+
+	if (time_is_after_jiffies(sbi->iostat_next_period))
+		return;
+
+	/* Need double check under the lock */
+	spin_lock(&sbi->iostat_lock);
+	if (time_is_after_jiffies(sbi->iostat_next_period)) {
+		spin_unlock(&sbi->iostat_lock);
+		return;
+	}
+	sbi->iostat_next_period = jiffies +
+				msecs_to_jiffies(sbi->iostat_period_ms);
+
+	for (i = 0; i < NR_IO_TYPE; i++) {
+		iostat_diff[i] = sbi->rw_iostat[i] -
+				sbi->prev_rw_iostat[i];
+		sbi->prev_rw_iostat[i] = sbi->rw_iostat[i];
+	}
+	spin_unlock(&sbi->iostat_lock);
+
+	trace_f2fs_iostat(sbi, iostat_diff);
+}
+
 static int __maybe_unused iostat_info_seq_show(struct seq_file *seq,
 					       void *offset)
 {
@@ -762,33 +802,51 @@ static int __maybe_unused iostat_info_seq_show(struct seq_file *seq,
 
 	seq_printf(seq, "time:		%-16llu\n", now);
 
-	/* print app IOs */
+	/* print app write IOs */
 	seq_printf(seq, "app buffered:	%-16llu\n",
-				sbi->write_iostat[APP_BUFFERED_IO]);
+				sbi->rw_iostat[APP_BUFFERED_IO]);
 	seq_printf(seq, "app direct:	%-16llu\n",
-				sbi->write_iostat[APP_DIRECT_IO]);
+				sbi->rw_iostat[APP_DIRECT_IO]);
 	seq_printf(seq, "app mapped:	%-16llu\n",
-				sbi->write_iostat[APP_MAPPED_IO]);
+				sbi->rw_iostat[APP_MAPPED_IO]);
 
-	/* print fs IOs */
+	/* print fs write IOs */
 	seq_printf(seq, "fs data:	%-16llu\n",
-				sbi->write_iostat[FS_DATA_IO]);
+				sbi->rw_iostat[FS_DATA_IO]);
 	seq_printf(seq, "fs node:	%-16llu\n",
-				sbi->write_iostat[FS_NODE_IO]);
+				sbi->rw_iostat[FS_NODE_IO]);
 	seq_printf(seq, "fs meta:	%-16llu\n",
-				sbi->write_iostat[FS_META_IO]);
+				sbi->rw_iostat[FS_META_IO]);
 	seq_printf(seq, "fs gc data:	%-16llu\n",
-				sbi->write_iostat[FS_GC_DATA_IO]);
+				sbi->rw_iostat[FS_GC_DATA_IO]);
 	seq_printf(seq, "fs gc node:	%-16llu\n",
-				sbi->write_iostat[FS_GC_NODE_IO]);
+				sbi->rw_iostat[FS_GC_NODE_IO]);
 	seq_printf(seq, "fs cp data:	%-16llu\n",
-				sbi->write_iostat[FS_CP_DATA_IO]);
+				sbi->rw_iostat[FS_CP_DATA_IO]);
 	seq_printf(seq, "fs cp node:	%-16llu\n",
-				sbi->write_iostat[FS_CP_NODE_IO]);
+				sbi->rw_iostat[FS_CP_NODE_IO]);
 	seq_printf(seq, "fs cp meta:	%-16llu\n",
-				sbi->write_iostat[FS_CP_META_IO]);
+				sbi->rw_iostat[FS_CP_META_IO]);
+
+	/* print app read IOs */
+	seq_printf(seq, "app buffered:	%-16llu\n",
+				sbi->rw_iostat[APP_BUFFERED_READ_IO]);
+	seq_printf(seq, "app direct:	%-16llu\n",
+				sbi->rw_iostat[APP_DIRECT_READ_IO]);
+	seq_printf(seq, "app mapped:	%-16llu\n",
+				sbi->rw_iostat[APP_MAPPED_READ_IO]);
+
+	/* print fs read IOs */
+	seq_printf(seq, "fs data:	%-16llu\n",
+				sbi->rw_iostat[FS_DATA_READ_IO]);
+	seq_printf(seq, "fs node:	%-16llu\n",
+				sbi->rw_iostat[FS_NODE_READ_IO]);
+	seq_printf(seq, "fs meta:	%-16llu\n",
+				sbi->rw_iostat[FS_META_READ_IO]);
+
+	/* print other IOs */
 	seq_printf(seq, "fs discard:	%-16llu\n",
-				sbi->write_iostat[FS_DISCARD]);
+				sbi->rw_iostat[FS_DISCARD]);
 
 	return 0;
 }
diff --git a/fs/f2fs/verity.c b/fs/f2fs/verity.c
index d7d430a6f130..865c9fb774fb 100644
--- a/fs/f2fs/verity.c
+++ b/fs/f2fs/verity.c
@@ -222,37 +222,6 @@ static int f2fs_get_verity_descriptor(struct inode *inode, void *buf,
 	return size;
 }
 
-/*
- * Prefetch some pages from the file's Merkle tree.
- *
- * This is basically a stripped-down version of __do_page_cache_readahead()
- * which works on pages past i_size.
- */
-static void f2fs_merkle_tree_readahead(struct address_space *mapping,
-				       pgoff_t start_index, unsigned long count)
-{
-	LIST_HEAD(pages);
-	unsigned int nr_pages = 0;
-	struct page *page;
-	pgoff_t index;
-	struct blk_plug plug;
-
-	for (index = start_index; index < start_index + count; index++) {
-		page = xa_load(&mapping->i_pages, index);
-		if (!page || xa_is_value(page)) {
-			page = __page_cache_alloc(readahead_gfp_mask(mapping));
-			if (!page)
-				break;
-			page->index = index;
-			list_add(&page->lru, &pages);
-			nr_pages++;
-		}
-	}
-	blk_start_plug(&plug);
-	f2fs_mpage_readpages(mapping, &pages, NULL, nr_pages, true);
-	blk_finish_plug(&plug);
-}
-
 static struct page *f2fs_read_merkle_tree_page(struct inode *inode,
 					       pgoff_t index,
 					       unsigned long num_ra_pages)
@@ -266,8 +235,8 @@ static struct page *f2fs_read_merkle_tree_page(struct inode *inode,
 		if (page)
 			put_page(page);
 		else if (num_ra_pages > 1)
-			f2fs_merkle_tree_readahead(inode->i_mapping, index,
-						   num_ra_pages);
+			page_cache_readahead_unbounded(inode->i_mapping, NULL,
+					index, num_ra_pages, 0);
 		page = read_mapping_page(inode->i_mapping, index, NULL);
 	}
 	return page;
diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
index 718163d0c621..ca31993dcb47 100644
--- a/fs/fat/Kconfig
+++ b/fs/fat/Kconfig
@@ -69,7 +69,7 @@ config VFAT_FS
 
 	  The VFAT support enlarges your kernel by about 10 KB and it only
 	  works if you said Y to the "DOS FAT fs support" above.  Please read
-	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
+	  the file <file:Documentation/filesystems/vfat.rst> for details.  If
 	  unsure, say Y.
 
 	  To compile this as a module, choose M here: the module will be called
@@ -82,7 +82,7 @@ config FAT_DEFAULT_CODEPAGE
 	help
 	  This option should be set to the codepage of your FAT filesystems.
 	  It can be overridden with the "codepage" mount option.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
+	  See <file:Documentation/filesystems/vfat.rst> for more information.
 
 config FAT_DEFAULT_IOCHARSET
 	string "Default iocharset for FAT"
@@ -96,7 +96,7 @@ config FAT_DEFAULT_IOCHARSET
 	  Note that "utf8" is not recommended for FAT filesystems.
 	  If unsure, you shouldn't set "utf8" here - select the next option
 	  instead if you would like to use UTF-8 encoded file names by default.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
+	  See <file:Documentation/filesystems/vfat.rst> for more information.
 
 	  Enable any character sets you need in File Systems/Native Language
 	  Support.
@@ -114,4 +114,4 @@ config FAT_DEFAULT_UTF8
 
 	  Say Y if you use UTF-8 encoding for file names, N otherwise.
 
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
+	  See <file:Documentation/filesystems/vfat.rst> for more information.
diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c
index 3647c65a0f48..bbfe18c07417 100644
--- a/fs/fat/fatent.c
+++ b/fs/fat/fatent.c
@@ -632,20 +632,80 @@ int fat_free_clusters(struct inode *inode, int cluster)
 }
 EXPORT_SYMBOL_GPL(fat_free_clusters);
 
-/* 128kb is the whole sectors for FAT12 and FAT16 */
-#define FAT_READA_SIZE		(128 * 1024)
+struct fatent_ra {
+	sector_t cur;
+	sector_t limit;
+
+	unsigned int ra_blocks;
+	sector_t ra_advance;
+	sector_t ra_next;
+	sector_t ra_limit;
+};
 
-static void fat_ent_reada(struct super_block *sb, struct fat_entry *fatent,
-			  unsigned long reada_blocks)
+static void fat_ra_init(struct super_block *sb, struct fatent_ra *ra,
+			struct fat_entry *fatent, int ent_limit)
 {
-	const struct fatent_operations *ops = MSDOS_SB(sb)->fatent_ops;
-	sector_t blocknr;
-	int i, offset;
+	struct msdos_sb_info *sbi = MSDOS_SB(sb);
+	const struct fatent_operations *ops = sbi->fatent_ops;
+	sector_t blocknr, block_end;
+	int offset;
+	/*
+	 * This is the sequential read, so ra_pages * 2 (but try to
+	 * align the optimal hardware IO size).
+	 * [BTW, 128kb covers the whole sectors for FAT12 and FAT16]
+	 */
+	unsigned long ra_pages = sb->s_bdi->ra_pages;
+	unsigned int reada_blocks;
 
+	if (ra_pages > sb->s_bdi->io_pages)
+		ra_pages = rounddown(ra_pages, sb->s_bdi->io_pages);
+	reada_blocks = ra_pages << (PAGE_SHIFT - sb->s_blocksize_bits + 1);
+
+	/* Initialize the range for sequential read */
 	ops->ent_blocknr(sb, fatent->entry, &offset, &blocknr);
+	ops->ent_blocknr(sb, ent_limit - 1, &offset, &block_end);
+	ra->cur = 0;
+	ra->limit = (block_end + 1) - blocknr;
 
-	for (i = 0; i < reada_blocks; i++)
-		sb_breadahead(sb, blocknr + i);
+	/* Advancing the window at half size */
+	ra->ra_blocks = reada_blocks >> 1;
+	ra->ra_advance = ra->cur;
+	ra->ra_next = ra->cur;
+	ra->ra_limit = ra->cur + min_t(sector_t, reada_blocks, ra->limit);
+}
+
+/* Assuming to be called before reading a new block (increments ->cur). */
+static void fat_ent_reada(struct super_block *sb, struct fatent_ra *ra,
+			  struct fat_entry *fatent)
+{
+	if (ra->ra_next >= ra->ra_limit)
+		return;
+
+	if (ra->cur >= ra->ra_advance) {
+		struct msdos_sb_info *sbi = MSDOS_SB(sb);
+		const struct fatent_operations *ops = sbi->fatent_ops;
+		struct blk_plug plug;
+		sector_t blocknr, diff;
+		int offset;
+
+		ops->ent_blocknr(sb, fatent->entry, &offset, &blocknr);
+
+		diff = blocknr - ra->cur;
+		blk_start_plug(&plug);
+		/*
+		 * FIXME: we would want to directly use the bio with
+		 * pages to reduce the number of segments.
+		 */
+		for (; ra->ra_next < ra->ra_limit; ra->ra_next++)
+			sb_breadahead(sb, ra->ra_next + diff);
+		blk_finish_plug(&plug);
+
+		/* Advance the readahead window */
+		ra->ra_advance += ra->ra_blocks;
+		ra->ra_limit += min_t(sector_t,
+				      ra->ra_blocks, ra->limit - ra->ra_limit);
+	}
+	ra->cur++;
 }
 
 int fat_count_free_clusters(struct super_block *sb)
@@ -653,27 +713,20 @@ int fat_count_free_clusters(struct super_block *sb)
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 	const struct fatent_operations *ops = sbi->fatent_ops;
 	struct fat_entry fatent;
-	unsigned long reada_blocks, reada_mask, cur_block;
+	struct fatent_ra fatent_ra;
 	int err = 0, free;
 
 	lock_fat(sbi);
 	if (sbi->free_clusters != -1 && sbi->free_clus_valid)
 		goto out;
 
-	reada_blocks = FAT_READA_SIZE >> sb->s_blocksize_bits;
-	reada_mask = reada_blocks - 1;
-	cur_block = 0;
-
 	free = 0;
 	fatent_init(&fatent);
 	fatent_set_entry(&fatent, FAT_START_ENT);
+	fat_ra_init(sb, &fatent_ra, &fatent, sbi->max_cluster);
 	while (fatent.entry < sbi->max_cluster) {
 		/* readahead of fat blocks */
-		if ((cur_block & reada_mask) == 0) {
-			unsigned long rest = sbi->fat_length - cur_block;
-			fat_ent_reada(sb, &fatent, min(reada_blocks, rest));
-		}
-		cur_block++;
+		fat_ent_reada(sb, &fatent_ra, &fatent);
 
 		err = fat_ent_read_block(sb, &fatent);
 		if (err)
@@ -707,9 +760,9 @@ int fat_trim_fs(struct inode *inode, struct fstrim_range *range)
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 	const struct fatent_operations *ops = sbi->fatent_ops;
 	struct fat_entry fatent;
+	struct fatent_ra fatent_ra;
 	u64 ent_start, ent_end, minlen, trimmed = 0;
 	u32 free = 0;
-	unsigned long reada_blocks, reada_mask, cur_block = 0;
 	int err = 0;
 
 	/*
@@ -727,19 +780,13 @@ int fat_trim_fs(struct inode *inode, struct fstrim_range *range)
 	if (ent_end >= sbi->max_cluster)
 		ent_end = sbi->max_cluster - 1;
 
-	reada_blocks = FAT_READA_SIZE >> sb->s_blocksize_bits;
-	reada_mask = reada_blocks - 1;
-
 	fatent_init(&fatent);
 	lock_fat(sbi);
 	fatent_set_entry(&fatent, ent_start);
+	fat_ra_init(sb, &fatent_ra, &fatent, ent_end + 1);
 	while (fatent.entry <= ent_end) {
 		/* readahead of fat blocks */
-		if ((cur_block & reada_mask) == 0) {
-			unsigned long rest = sbi->fat_length - cur_block;
-			fat_ent_reada(sb, &fatent, min(reada_blocks, rest));
-		}
-		cur_block++;
+		fat_ent_reada(sb, &fatent_ra, &fatent);
 
 		err = fat_ent_read_block(sb, &fatent);
 		if (err)
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 71946da84388..a0cf99debb1e 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -210,10 +210,9 @@ static int fat_readpage(struct file *file, struct page *page)
 	return mpage_readpage(page, fat_get_block);
 }
 
-static int fat_readpages(struct file *file, struct address_space *mapping,
-			 struct list_head *pages, unsigned nr_pages)
+static void fat_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, fat_get_block);
+	mpage_readahead(rac, fat_get_block);
 }
 
 static void fat_write_failed(struct address_space *mapping, loff_t to)
@@ -344,7 +343,7 @@ int fat_block_truncate_page(struct inode *inode, loff_t from)
 
 static const struct address_space_operations fat_aops = {
 	.readpage	= fat_readpage,
-	.readpages	= fat_readpages,
+	.readahead	= fat_readahead,
 	.writepage	= fat_writepage,
 	.writepages	= fat_writepages,
 	.write_begin	= fat_write_begin,
@@ -1520,6 +1519,12 @@ static int fat_read_bpb(struct super_block *sb, struct fat_boot_sector *b,
 		goto out;
 	}
 
+	if (bpb->fat_fat_length == 0 && bpb->fat32_length == 0) {
+		if (!silent)
+			fat_msg(sb, KERN_ERR, "bogus number of FAT sectors");
+		goto out;
+	}
+
 	error = 0;
 
 out:
diff --git a/fs/file_table.c b/fs/file_table.c
index 30d55c9a1744..656647f9575a 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -80,14 +80,14 @@ EXPORT_SYMBOL_GPL(get_max_files);
  */
 #if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
 int proc_nr_files(struct ctl_table *table, int write,
-                     void __user *buffer, size_t *lenp, loff_t *ppos)
+                     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	files_stat.nr_files = get_nr_files();
 	return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
 }
 #else
 int proc_nr_files(struct ctl_table *table, int write,
-                     void __user *buffer, size_t *lenp, loff_t *ppos)
+                     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	return -ENOSYS;
 }
@@ -198,6 +198,7 @@ static struct file *alloc_file(const struct path *path, int flags,
 	file->f_inode = path->dentry->d_inode;
 	file->f_mapping = path->dentry->d_inode->i_mapping;
 	file->f_wb_err = filemap_sample_wb_err(file->f_mapping);
+	file->f_sb_err = file_sample_sb_err(file);
 	if ((file->f_mode & FMODE_READ) &&
 	     likely(fop->read || fop->read_iter))
 		file->f_mode |= FMODE_CAN_READ;
diff --git a/fs/fscache/main.c b/fs/fscache/main.c
index 59c2494efda3..c1e6cc9091aa 100644
--- a/fs/fscache/main.c
+++ b/fs/fscache/main.c
@@ -51,8 +51,7 @@ static unsigned fscache_op_max_active = 2;
 static struct ctl_table_header *fscache_sysctl_header;
 
 static int fscache_max_active_sysctl(struct ctl_table *table, int write,
-				     void __user *buffer,
-				     size_t *lenp, loff_t *ppos)
+				     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct workqueue_struct **wqp = table->extra1;
 	unsigned int *datap = table->data;
diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig
index eb2a585572dc..774b2618018a 100644
--- a/fs/fuse/Kconfig
+++ b/fs/fuse/Kconfig
@@ -12,7 +12,7 @@ config FUSE_FS
 	  although chances are your distribution already has that library
 	  installed if you've installed the "fuse" package itself.
 
-	  See <file:Documentation/filesystems/fuse.txt> for more information.
+	  See <file:Documentation/filesystems/fuse.rst> for more information.
 	  See <file:Documentation/Changes> for needed library/utility version.
 
 	  If you want to develop a userspace FS, or if you want to use
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 97eec7522bf2..5ba67b0d71f9 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -342,7 +342,7 @@ static int queue_interrupt(struct fuse_iqueue *fiq, struct fuse_req *req)
 		list_add_tail(&req->intr_entry, &fiq->interrupts);
 		/*
 		 * Pairs with smp_mb() implied by test_and_set_bit()
-		 * from request_end().
+		 * from fuse_request_end().
 		 */
 		smp_mb();
 		if (test_bit(FR_FINISHED, &req->flags)) {
@@ -1977,8 +1977,9 @@ static ssize_t fuse_dev_splice_write(struct pipe_inode_info *pipe,
 		struct pipe_buffer *ibuf;
 		struct pipe_buffer *obuf;
 
-		BUG_ON(nbuf >= pipe->ring_size);
-		BUG_ON(tail == head);
+		if (WARN_ON(nbuf >= count || tail == head))
+			goto out_free;
+
 		ibuf = &pipe->bufs[tail & mask];
 		obuf = &bufs[nbuf];
 
@@ -2081,7 +2082,7 @@ static void end_polls(struct fuse_conn *fc)
  * The same effect is usually achievable through killing the filesystem daemon
  * and all users of the filesystem.  The exception is the combination of an
  * asynchronous request and the tricky deadlock (see
- * Documentation/filesystems/fuse.txt).
+ * Documentation/filesystems/fuse.rst).
  *
  * Aborting requests under I/O goes as follows: 1: Separate out unlocked
  * requests, they should be finished off immediately.  Locked requests will be
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 9d67b830fb7a..2ea882a5e11f 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -712,6 +712,7 @@ static ssize_t fuse_async_req_send(struct fuse_conn *fc,
 	spin_unlock(&io->lock);
 
 	ia->ap.args.end = fuse_aio_complete_req;
+	ia->ap.args.may_block = io->should_dirty;
 	err = fuse_simple_background(fc, &ia->ap.args, GFP_KERNEL);
 	if (err)
 		fuse_aio_complete_req(fc, &ia->ap.args, err);
@@ -915,84 +916,40 @@ static void fuse_send_readpages(struct fuse_io_args *ia, struct file *file)
 	fuse_readpages_end(fc, &ap->args, err);
 }
 
-struct fuse_fill_data {
-	struct fuse_io_args *ia;
-	struct file *file;
-	struct inode *inode;
-	unsigned int nr_pages;
-	unsigned int max_pages;
-};
-
-static int fuse_readpages_fill(void *_data, struct page *page)
+static void fuse_readahead(struct readahead_control *rac)
 {
-	struct fuse_fill_data *data = _data;
-	struct fuse_io_args *ia = data->ia;
-	struct fuse_args_pages *ap = &ia->ap;
-	struct inode *inode = data->inode;
+	struct inode *inode = rac->mapping->host;
 	struct fuse_conn *fc = get_fuse_conn(inode);
+	unsigned int i, max_pages, nr_pages = 0;
 
-	fuse_wait_on_page_writeback(inode, page->index);
-
-	if (ap->num_pages &&
-	    (ap->num_pages == fc->max_pages ||
-	     (ap->num_pages + 1) * PAGE_SIZE > fc->max_read ||
-	     ap->pages[ap->num_pages - 1]->index + 1 != page->index)) {
-		data->max_pages = min_t(unsigned int, data->nr_pages,
-					fc->max_pages);
-		fuse_send_readpages(ia, data->file);
-		data->ia = ia = fuse_io_alloc(NULL, data->max_pages);
-		if (!ia) {
-			unlock_page(page);
-			return -ENOMEM;
-		}
-		ap = &ia->ap;
-	}
-
-	if (WARN_ON(ap->num_pages >= data->max_pages)) {
-		unlock_page(page);
-		fuse_io_free(ia);
-		return -EIO;
-	}
-
-	get_page(page);
-	ap->pages[ap->num_pages] = page;
-	ap->descs[ap->num_pages].length = PAGE_SIZE;
-	ap->num_pages++;
-	data->nr_pages--;
-	return 0;
-}
-
-static int fuse_readpages(struct file *file, struct address_space *mapping,
-			  struct list_head *pages, unsigned nr_pages)
-{
-	struct inode *inode = mapping->host;
-	struct fuse_conn *fc = get_fuse_conn(inode);
-	struct fuse_fill_data data;
-	int err;
-
-	err = -EIO;
 	if (is_bad_inode(inode))
-		goto out;
+		return;
 
-	data.file = file;
-	data.inode = inode;
-	data.nr_pages = nr_pages;
-	data.max_pages = min_t(unsigned int, nr_pages, fc->max_pages);
-;
-	data.ia = fuse_io_alloc(NULL, data.max_pages);
-	err = -ENOMEM;
-	if (!data.ia)
-		goto out;
+	max_pages = min_t(unsigned int, fc->max_pages,
+			fc->max_read / PAGE_SIZE);
 
-	err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
-	if (!err) {
-		if (data.ia->ap.num_pages)
-			fuse_send_readpages(data.ia, file);
-		else
-			fuse_io_free(data.ia);
+	for (;;) {
+		struct fuse_io_args *ia;
+		struct fuse_args_pages *ap;
+
+		nr_pages = readahead_count(rac) - nr_pages;
+		if (nr_pages > max_pages)
+			nr_pages = max_pages;
+		if (nr_pages == 0)
+			break;
+		ia = fuse_io_alloc(NULL, nr_pages);
+		if (!ia)
+			return;
+		ap = &ia->ap;
+		nr_pages = __readahead_batch(rac, ap->pages, nr_pages);
+		for (i = 0; i < nr_pages; i++) {
+			fuse_wait_on_page_writeback(inode,
+						    readahead_index(rac) + i);
+			ap->descs[i].length = PAGE_SIZE;
+		}
+		ap->num_pages = nr_pages;
+		fuse_send_readpages(ia, rac->file);
 	}
-out:
-	return err;
 }
 
 static ssize_t fuse_cache_read_iter(struct kiocb *iocb, struct iov_iter *to)
@@ -3373,10 +3330,10 @@ static const struct file_operations fuse_file_operations = {
 
 static const struct address_space_operations fuse_file_aops  = {
 	.readpage	= fuse_readpage,
+	.readahead	= fuse_readahead,
 	.writepage	= fuse_writepage,
 	.writepages	= fuse_writepages,
 	.launder_page	= fuse_launder_page,
-	.readpages	= fuse_readpages,
 	.set_page_dirty	= __set_page_dirty_nobuffers,
 	.bmap		= fuse_bmap,
 	.direct_IO	= fuse_direct_IO,
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index ca344bf71404..d7cde216fc87 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -249,6 +249,7 @@ struct fuse_args {
 	bool out_argvar:1;
 	bool page_zeroing:1;
 	bool page_replace:1;
+	bool may_block:1;
 	struct fuse_in_arg in_args[3];
 	struct fuse_arg out_args[2];
 	void (*end)(struct fuse_conn *fc, struct fuse_args *args, int error);
diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c
index bade74768903..0c6ef5d3c6ab 100644
--- a/fs/fuse/virtio_fs.c
+++ b/fs/fuse/virtio_fs.c
@@ -60,6 +60,12 @@ struct virtio_fs_forget {
 	struct virtio_fs_forget_req req;
 };
 
+struct virtio_fs_req_work {
+	struct fuse_req *req;
+	struct virtio_fs_vq *fsvq;
+	struct work_struct done_work;
+};
+
 static int virtio_fs_enqueue_req(struct virtio_fs_vq *fsvq,
 				 struct fuse_req *req, bool in_flight);
 
@@ -485,19 +491,67 @@ static void copy_args_from_argbuf(struct fuse_args *args, struct fuse_req *req)
 }
 
 /* Work function for request completion */
+static void virtio_fs_request_complete(struct fuse_req *req,
+				       struct virtio_fs_vq *fsvq)
+{
+	struct fuse_pqueue *fpq = &fsvq->fud->pq;
+	struct fuse_conn *fc = fsvq->fud->fc;
+	struct fuse_args *args;
+	struct fuse_args_pages *ap;
+	unsigned int len, i, thislen;
+	struct page *page;
+
+	/*
+	 * TODO verify that server properly follows FUSE protocol
+	 * (oh.uniq, oh.len)
+	 */
+	args = req->args;
+	copy_args_from_argbuf(args, req);
+
+	if (args->out_pages && args->page_zeroing) {
+		len = args->out_args[args->out_numargs - 1].size;
+		ap = container_of(args, typeof(*ap), args);
+		for (i = 0; i < ap->num_pages; i++) {
+			thislen = ap->descs[i].length;
+			if (len < thislen) {
+				WARN_ON(ap->descs[i].offset);
+				page = ap->pages[i];
+				zero_user_segment(page, len, thislen);
+				len = 0;
+			} else {
+				len -= thislen;
+			}
+		}
+	}
+
+	spin_lock(&fpq->lock);
+	clear_bit(FR_SENT, &req->flags);
+	spin_unlock(&fpq->lock);
+
+	fuse_request_end(fc, req);
+	spin_lock(&fsvq->lock);
+	dec_in_flight_req(fsvq);
+	spin_unlock(&fsvq->lock);
+}
+
+static void virtio_fs_complete_req_work(struct work_struct *work)
+{
+	struct virtio_fs_req_work *w =
+		container_of(work, typeof(*w), done_work);
+
+	virtio_fs_request_complete(w->req, w->fsvq);
+	kfree(w);
+}
+
 static void virtio_fs_requests_done_work(struct work_struct *work)
 {
 	struct virtio_fs_vq *fsvq = container_of(work, struct virtio_fs_vq,
 						 done_work);
 	struct fuse_pqueue *fpq = &fsvq->fud->pq;
-	struct fuse_conn *fc = fsvq->fud->fc;
 	struct virtqueue *vq = fsvq->vq;
 	struct fuse_req *req;
-	struct fuse_args_pages *ap;
 	struct fuse_req *next;
-	struct fuse_args *args;
-	unsigned int len, i, thislen;
-	struct page *page;
+	unsigned int len;
 	LIST_HEAD(reqs);
 
 	/* Collect completed requests off the virtqueue */
@@ -515,38 +569,20 @@ static void virtio_fs_requests_done_work(struct work_struct *work)
 
 	/* End requests */
 	list_for_each_entry_safe(req, next, &reqs, list) {
-		/*
-		 * TODO verify that server properly follows FUSE protocol
-		 * (oh.uniq, oh.len)
-		 */
-		args = req->args;
-		copy_args_from_argbuf(args, req);
-
-		if (args->out_pages && args->page_zeroing) {
-			len = args->out_args[args->out_numargs - 1].size;
-			ap = container_of(args, typeof(*ap), args);
-			for (i = 0; i < ap->num_pages; i++) {
-				thislen = ap->descs[i].length;
-				if (len < thislen) {
-					WARN_ON(ap->descs[i].offset);
-					page = ap->pages[i];
-					zero_user_segment(page, len, thislen);
-					len = 0;
-				} else {
-					len -= thislen;
-				}
-			}
-		}
-
-		spin_lock(&fpq->lock);
-		clear_bit(FR_SENT, &req->flags);
 		list_del_init(&req->list);
-		spin_unlock(&fpq->lock);
 
-		fuse_request_end(fc, req);
-		spin_lock(&fsvq->lock);
-		dec_in_flight_req(fsvq);
-		spin_unlock(&fsvq->lock);
+		/* blocking async request completes in a worker context */
+		if (req->args->may_block) {
+			struct virtio_fs_req_work *w;
+
+			w = kzalloc(sizeof(*w), GFP_NOFS | __GFP_NOFAIL);
+			INIT_WORK(&w->done_work, virtio_fs_complete_req_work);
+			w->fsvq = fsvq;
+			w->req = req;
+			schedule_work(&w->done_work);
+		} else {
+			virtio_fs_request_complete(req, fsvq);
+		}
 	}
 }
 
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 786c1ce8f030..72c9560f4467 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -577,7 +577,7 @@ int gfs2_internal_read(struct gfs2_inode *ip, char *buf, loff_t *pos,
 }
 
 /**
- * gfs2_readpages - Read a bunch of pages at once
+ * gfs2_readahead - Read a bunch of pages at once
  * @file: The file to read from
  * @mapping: Address space info
  * @pages: List of pages to read
@@ -590,31 +590,24 @@ int gfs2_internal_read(struct gfs2_inode *ip, char *buf, loff_t *pos,
  *    obviously not something we'd want to do on too regular a basis.
  *    Any I/O we ignore at this time will be done via readpage later.
  * 2. We don't handle stuffed files here we let readpage do the honours.
- * 3. mpage_readpages() does most of the heavy lifting in the common case.
+ * 3. mpage_readahead() does most of the heavy lifting in the common case.
  * 4. gfs2_block_map() is relied upon to set BH_Boundary in the right places.
  */
 
-static int gfs2_readpages(struct file *file, struct address_space *mapping,
-			  struct list_head *pages, unsigned nr_pages)
+static void gfs2_readahead(struct readahead_control *rac)
 {
-	struct inode *inode = mapping->host;
+	struct inode *inode = rac->mapping->host;
 	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_sbd *sdp = GFS2_SB(inode);
 	struct gfs2_holder gh;
-	int ret;
 
 	gfs2_holder_init(ip->i_gl, LM_ST_SHARED, 0, &gh);
-	ret = gfs2_glock_nq(&gh);
-	if (unlikely(ret))
+	if (gfs2_glock_nq(&gh))
 		goto out_uninit;
 	if (!gfs2_is_stuffed(ip))
-		ret = mpage_readpages(mapping, pages, nr_pages, gfs2_block_map);
+		mpage_readahead(rac, gfs2_block_map);
 	gfs2_glock_dq(&gh);
 out_uninit:
 	gfs2_holder_uninit(&gh);
-	if (unlikely(gfs2_withdrawn(sdp)))
-		ret = -EIO;
-	return ret;
 }
 
 /**
@@ -833,7 +826,7 @@ static const struct address_space_operations gfs2_aops = {
 	.writepage = gfs2_writepage,
 	.writepages = gfs2_writepages,
 	.readpage = gfs2_readpage,
-	.readpages = gfs2_readpages,
+	.readahead = gfs2_readahead,
 	.bmap = gfs2_bmap,
 	.invalidatepage = gfs2_invalidatepage,
 	.releasepage = gfs2_releasepage,
@@ -847,7 +840,7 @@ static const struct address_space_operations gfs2_jdata_aops = {
 	.writepage = gfs2_jdata_writepage,
 	.writepages = gfs2_jdata_writepages,
 	.readpage = gfs2_readpage,
-	.readpages = gfs2_readpages,
+	.readahead = gfs2_readahead,
 	.set_page_dirty = jdata_set_page_dirty,
 	.bmap = gfs2_bmap,
 	.invalidatepage = gfs2_invalidatepage,
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index c3f7732415be..c0f2875c946c 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -354,7 +354,7 @@ static __be64 *gfs2_dir_get_hash_table(struct gfs2_inode *ip)
 
 	hc = kmalloc(hsize, GFP_NOFS | __GFP_NOWARN);
 	if (hc == NULL)
-		hc = __vmalloc(hsize, GFP_NOFS, PAGE_KERNEL);
+		hc = __vmalloc(hsize, GFP_NOFS);
 
 	if (hc == NULL)
 		return ERR_PTR(-ENOMEM);
@@ -1166,7 +1166,7 @@ static int dir_double_exhash(struct gfs2_inode *dip)
 
 	hc2 = kmalloc_array(hsize_bytes, 2, GFP_NOFS | __GFP_NOWARN);
 	if (hc2 == NULL)
-		hc2 = __vmalloc(hsize_bytes * 2, GFP_NOFS, PAGE_KERNEL);
+		hc2 = __vmalloc(hsize_bytes * 2, GFP_NOFS);
 
 	if (!hc2)
 		return -ENOMEM;
@@ -1327,7 +1327,7 @@ static void *gfs2_alloc_sort_buffer(unsigned size)
 	if (size < KMALLOC_MAX_SIZE)
 		ptr = kmalloc(size, GFP_NOFS | __GFP_NOWARN);
 	if (!ptr)
-		ptr = __vmalloc(size, GFP_NOFS, PAGE_KERNEL);
+		ptr = __vmalloc(size, GFP_NOFS);
 	return ptr;
 }
 
@@ -1987,8 +1987,7 @@ static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len,
 
 	ht = kzalloc(size, GFP_NOFS | __GFP_NOWARN);
 	if (ht == NULL)
-		ht = __vmalloc(size, GFP_NOFS | __GFP_NOWARN | __GFP_ZERO,
-			       PAGE_KERNEL);
+		ht = __vmalloc(size, GFP_NOFS | __GFP_NOWARN | __GFP_ZERO);
 	if (!ht)
 		return -ENOMEM;
 
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index cc0c4b5800be..b84ac5843ec4 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -1368,7 +1368,7 @@ int gfs2_quota_init(struct gfs2_sbd *sdp)
 	sdp->sd_quota_bitmap = kzalloc(bm_size, GFP_NOFS | __GFP_NOWARN);
 	if (sdp->sd_quota_bitmap == NULL)
 		sdp->sd_quota_bitmap = __vmalloc(bm_size, GFP_NOFS |
-						 __GFP_ZERO, PAGE_KERNEL);
+						 __GFP_ZERO);
 	if (!sdp->sd_quota_bitmap)
 		return error;
 
diff --git a/fs/hfs/Kconfig b/fs/hfs/Kconfig
index 44f6e89bcb75..129926b5142d 100644
--- a/fs/hfs/Kconfig
+++ b/fs/hfs/Kconfig
@@ -6,7 +6,7 @@ config HFS_FS
 	help
 	  If you say Y here, you will be able to mount Macintosh-formatted
 	  floppy disks and hard drive partitions with full read-write access.
-	  Please read <file:Documentation/filesystems/hfs.txt> to learn about
+	  Please read <file:Documentation/filesystems/hfs.rst> to learn about
 	  the available mount options.
 
 	  To compile this file system support as a module, choose M here: the
diff --git a/fs/hfs/btree.h b/fs/hfs/btree.h
index dcc2aab1b2c4..4ba45caf5939 100644
--- a/fs/hfs/btree.h
+++ b/fs/hfs/btree.h
@@ -60,7 +60,7 @@ struct hfs_bnode {
 	wait_queue_head_t lock_wq;
 	atomic_t refcnt;
 	unsigned int page_offset;
-	struct page *page[0];
+	struct page *page[];
 };
 
 #define HFS_BNODE_ERROR		0
diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h
index 3b03fff68543..a92de5199ec3 100644
--- a/fs/hfsplus/hfsplus_fs.h
+++ b/fs/hfsplus/hfsplus_fs.h
@@ -117,7 +117,7 @@ struct hfs_bnode {
 	wait_queue_head_t lock_wq;
 	atomic_t refcnt;
 	unsigned int page_offset;
-	struct page *page[0];
+	struct page *page[];
 };
 
 #define HFS_BNODE_LOCK		0
diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig
index 56aa0336254a..2b36dc6f0a10 100644
--- a/fs/hpfs/Kconfig
+++ b/fs/hpfs/Kconfig
@@ -9,7 +9,7 @@ config HPFS_FS
 	  write files to an OS/2 HPFS partition on your hard drive. OS/2
 	  floppies however are in regular MSDOS format, so you don't need this
 	  option in order to be able to read them. Read
-	  <file:Documentation/filesystems/hpfs.txt>.
+	  <file:Documentation/filesystems/hpfs.rst>.
 
 	  To compile this file system support as a module, choose M here: the
 	  module will be called hpfs.  If unsure, say N.
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index b36abf9cb345..2de0d3492d15 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -125,10 +125,9 @@ static int hpfs_writepage(struct page *page, struct writeback_control *wbc)
 	return block_write_full_page(page, hpfs_get_block, wbc);
 }
 
-static int hpfs_readpages(struct file *file, struct address_space *mapping,
-			  struct list_head *pages, unsigned nr_pages)
+static void hpfs_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, hpfs_get_block);
+	mpage_readahead(rac, hpfs_get_block);
 }
 
 static int hpfs_writepages(struct address_space *mapping,
@@ -198,7 +197,7 @@ static int hpfs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 const struct address_space_operations hpfs_aops = {
 	.readpage = hpfs_readpage,
 	.writepage = hpfs_writepage,
-	.readpages = hpfs_readpages,
+	.readahead = hpfs_readahead,
 	.writepages = hpfs_writepages,
 	.write_begin = hpfs_write_begin,
 	.write_end = hpfs_write_end,
diff --git a/fs/inode.c b/fs/inode.c
index 93d9252a00ab..9fcec07a9d7c 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -108,7 +108,7 @@ long get_nr_dirty_inodes(void)
  */
 #ifdef CONFIG_SYSCTL
 int proc_nr_inodes(struct ctl_table *table, int write,
-		   void __user *buffer, size_t *lenp, loff_t *ppos)
+		   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	inodes_stat.nr_inodes = get_nr_inodes();
 	inodes_stat.nr_unused = get_nr_inodes_unused();
@@ -1606,14 +1606,14 @@ EXPORT_SYMBOL(iput);
  *	@inode:  inode owning the block number being requested
  *	@block: pointer containing the block to find
  *
- *	Replaces the value in *block with the block number on the device holding
+ *	Replaces the value in ``*block`` with the block number on the device holding
  *	corresponding to the requested block number in the file.
  *	That is, asked for block 4 of inode 1 the function will replace the
- *	4 in *block, with disk block relative to the disk start that holds that
+ *	4 in ``*block``, with disk block relative to the disk start that holds that
  *	block of the file.
  *
  *	Returns -EINVAL in case of error, 0 otherwise. If mapping falls into a
- *	hole, returns 0 and *block is also set to 0.
+ *	hole, returns 0 and ``*block`` is also set to 0.
  */
 int bmap(struct inode *inode, sector_t *block)
 {
diff --git a/fs/io-wq.c b/fs/io-wq.c
index 4023c9846860..a5e90ac39e4d 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -10,7 +10,6 @@
 #include <linux/errno.h>
 #include <linux/sched/signal.h>
 #include <linux/mm.h>
-#include <linux/mmu_context.h>
 #include <linux/sched/mm.h>
 #include <linux/percpu.h>
 #include <linux/slab.h>
@@ -170,8 +169,7 @@ static bool __io_worker_unuse(struct io_wqe *wqe, struct io_worker *worker)
 			dropped_lock = true;
 		}
 		__set_current_state(TASK_RUNNING);
-		set_fs(KERNEL_DS);
-		unuse_mm(worker->mm);
+		kthread_unuse_mm(worker->mm);
 		mmput(worker->mm);
 		worker->mm = NULL;
 	}
@@ -418,18 +416,15 @@ static struct io_wq_work *io_get_next_work(struct io_wqe *wqe)
 static void io_wq_switch_mm(struct io_worker *worker, struct io_wq_work *work)
 {
 	if (worker->mm) {
-		unuse_mm(worker->mm);
+		kthread_unuse_mm(worker->mm);
 		mmput(worker->mm);
 		worker->mm = NULL;
 	}
-	if (!work->mm) {
-		set_fs(KERNEL_DS);
+	if (!work->mm)
 		return;
-	}
+
 	if (mmget_not_zero(work->mm)) {
-		use_mm(work->mm);
-		if (!worker->mm)
-			set_fs(USER_DS);
+		kthread_use_mm(work->mm);
 		worker->mm = work->mm;
 		/* hang on to this mm */
 		work->mm = NULL;
diff --git a/fs/io_uring.c b/fs/io_uring.c
index c687f57fb651..a76a9d38bae2 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -55,7 +55,6 @@
 #include <linux/fdtable.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
-#include <linux/mmu_context.h>
 #include <linux/percpu.h>
 #include <linux/slab.h>
 #include <linux/kthread.h>
@@ -2758,7 +2757,7 @@ static int io_splice_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 
 static bool io_splice_punt(struct file *file)
 {
-	if (get_pipe_info(file))
+	if (get_pipe_info(file, true))
 		return false;
 	if (!io_file_supports_async(file))
 		return true;
@@ -3268,7 +3267,7 @@ static int io_madvise(struct io_kiocb *req, bool force_nonblock)
 	if (force_nonblock)
 		return -EAGAIN;
 
-	ret = do_madvise(ma->addr, ma->len, ma->advice);
+	ret = do_madvise(NULL, current->mm, ma->addr, ma->len, ma->advice);
 	if (ret < 0)
 		req_set_fail_links(req);
 	io_cqring_add_event(req, ret);
@@ -5821,7 +5820,7 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
 	if (io_op_defs[req->opcode].needs_mm && !current->mm) {
 		if (unlikely(!mmget_not_zero(ctx->sqo_mm)))
 			return -EFAULT;
-		use_mm(ctx->sqo_mm);
+		kthread_use_mm(ctx->sqo_mm);
 	}
 
 	sqe_flags = READ_ONCE(sqe->flags);
@@ -5935,7 +5934,7 @@ static inline void io_sq_thread_drop_mm(struct io_ring_ctx *ctx)
 	struct mm_struct *mm = current->mm;
 
 	if (mm) {
-		unuse_mm(mm);
+		kthread_unuse_mm(mm);
 		mmput(mm);
 	}
 }
@@ -5944,15 +5943,12 @@ static int io_sq_thread(void *data)
 {
 	struct io_ring_ctx *ctx = data;
 	const struct cred *old_cred;
-	mm_segment_t old_fs;
 	DEFINE_WAIT(wait);
 	unsigned long timeout;
 	int ret = 0;
 
 	complete(&ctx->completions[1]);
 
-	old_fs = get_fs();
-	set_fs(USER_DS);
 	old_cred = override_creds(ctx->creds);
 
 	timeout = jiffies + ctx->sq_thread_idle;
@@ -6055,7 +6051,6 @@ static int io_sq_thread(void *data)
 	if (current->task_works)
 		task_work_run();
 
-	set_fs(old_fs);
 	io_sq_thread_drop_mm(ctx);
 	revert_creds(old_cred);
 
diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index 89e21961d1ad..890c8fcda4f3 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -214,9 +214,8 @@ iomap_read_end_io(struct bio *bio)
 struct iomap_readpage_ctx {
 	struct page		*cur_page;
 	bool			cur_page_in_bio;
-	bool			is_readahead;
 	struct bio		*bio;
-	struct list_head	*pages;
+	struct readahead_control *rac;
 };
 
 static void
@@ -308,7 +307,7 @@ iomap_readpage_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
 		if (ctx->bio)
 			submit_bio(ctx->bio);
 
-		if (ctx->is_readahead) /* same as readahead_gfp_mask */
+		if (ctx->rac) /* same as readahead_gfp_mask */
 			gfp |= __GFP_NORETRY | __GFP_NOWARN;
 		ctx->bio = bio_alloc(gfp, min(BIO_MAX_PAGES, nr_vecs));
 		/*
@@ -319,7 +318,7 @@ iomap_readpage_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
 		if (!ctx->bio)
 			ctx->bio = bio_alloc(orig_gfp, 1);
 		ctx->bio->bi_opf = REQ_OP_READ;
-		if (ctx->is_readahead)
+		if (ctx->rac)
 			ctx->bio->bi_opf |= REQ_RAHEAD;
 		ctx->bio->bi_iter.bi_sector = sector;
 		bio_set_dev(ctx->bio, iomap->bdev);
@@ -367,7 +366,7 @@ iomap_readpage(struct page *page, const struct iomap_ops *ops)
 	}
 
 	/*
-	 * Just like mpage_readpages and block_read_full_page we always
+	 * Just like mpage_readahead and block_read_full_page we always
 	 * return 0 and just mark the page as PageError on errors.  This
 	 * should be cleaned up all through the stack eventually.
 	 */
@@ -375,36 +374,8 @@ iomap_readpage(struct page *page, const struct iomap_ops *ops)
 }
 EXPORT_SYMBOL_GPL(iomap_readpage);
 
-static struct page *
-iomap_next_page(struct inode *inode, struct list_head *pages, loff_t pos,
-		loff_t length, loff_t *done)
-{
-	while (!list_empty(pages)) {
-		struct page *page = lru_to_page(pages);
-
-		if (page_offset(page) >= (u64)pos + length)
-			break;
-
-		list_del(&page->lru);
-		if (!add_to_page_cache_lru(page, inode->i_mapping, page->index,
-				GFP_NOFS))
-			return page;
-
-		/*
-		 * If we already have a page in the page cache at index we are
-		 * done.  Upper layers don't care if it is uptodate after the
-		 * readpages call itself as every page gets checked again once
-		 * actually needed.
-		 */
-		*done += PAGE_SIZE;
-		put_page(page);
-	}
-
-	return NULL;
-}
-
 static loff_t
-iomap_readpages_actor(struct inode *inode, loff_t pos, loff_t length,
+iomap_readahead_actor(struct inode *inode, loff_t pos, loff_t length,
 		void *data, struct iomap *iomap, struct iomap *srcmap)
 {
 	struct iomap_readpage_ctx *ctx = data;
@@ -418,10 +389,7 @@ iomap_readpages_actor(struct inode *inode, loff_t pos, loff_t length,
 			ctx->cur_page = NULL;
 		}
 		if (!ctx->cur_page) {
-			ctx->cur_page = iomap_next_page(inode, ctx->pages,
-					pos, length, &done);
-			if (!ctx->cur_page)
-				break;
+			ctx->cur_page = readahead_page(ctx->rac);
 			ctx->cur_page_in_bio = false;
 		}
 		ret = iomap_readpage_actor(inode, pos + done, length - done,
@@ -431,32 +399,43 @@ iomap_readpages_actor(struct inode *inode, loff_t pos, loff_t length,
 	return done;
 }
 
-int
-iomap_readpages(struct address_space *mapping, struct list_head *pages,
-		unsigned nr_pages, const struct iomap_ops *ops)
+/**
+ * iomap_readahead - Attempt to read pages from a file.
+ * @rac: Describes the pages to be read.
+ * @ops: The operations vector for the filesystem.
+ *
+ * This function is for filesystems to call to implement their readahead
+ * address_space operation.
+ *
+ * Context: The @ops callbacks may submit I/O (eg to read the addresses of
+ * blocks from disc), and may wait for it.  The caller may be trying to
+ * access a different page, and so sleeping excessively should be avoided.
+ * It may allocate memory, but should avoid costly allocations.  This
+ * function is called with memalloc_nofs set, so allocations will not cause
+ * the filesystem to be reentered.
+ */
+void iomap_readahead(struct readahead_control *rac, const struct iomap_ops *ops)
 {
+	struct inode *inode = rac->mapping->host;
+	loff_t pos = readahead_pos(rac);
+	loff_t length = readahead_length(rac);
 	struct iomap_readpage_ctx ctx = {
-		.pages		= pages,
-		.is_readahead	= true,
+		.rac	= rac,
 	};
-	loff_t pos = page_offset(list_entry(pages->prev, struct page, lru));
-	loff_t last = page_offset(list_entry(pages->next, struct page, lru));
-	loff_t length = last - pos + PAGE_SIZE, ret = 0;
 
-	trace_iomap_readpages(mapping->host, nr_pages);
+	trace_iomap_readahead(inode, readahead_count(rac));
 
 	while (length > 0) {
-		ret = iomap_apply(mapping->host, pos, length, 0, ops,
-				&ctx, iomap_readpages_actor);
+		loff_t ret = iomap_apply(inode, pos, length, 0, ops,
+				&ctx, iomap_readahead_actor);
 		if (ret <= 0) {
 			WARN_ON_ONCE(ret == 0);
-			goto done;
+			break;
 		}
 		pos += ret;
 		length -= ret;
 	}
-	ret = 0;
-done:
+
 	if (ctx.bio)
 		submit_bio(ctx.bio);
 	if (ctx.cur_page) {
@@ -464,15 +443,8 @@ iomap_readpages(struct address_space *mapping, struct list_head *pages,
 			unlock_page(ctx.cur_page);
 		put_page(ctx.cur_page);
 	}
-
-	/*
-	 * Check that we didn't lose a page due to the arcance calling
-	 * conventions..
-	 */
-	WARN_ON_ONCE(!ret && !list_empty(ctx.pages));
-	return ret;
 }
-EXPORT_SYMBOL_GPL(iomap_readpages);
+EXPORT_SYMBOL_GPL(iomap_readahead);
 
 /*
  * iomap_is_partially_uptodate checks whether blocks within a page are
diff --git a/fs/iomap/trace.h b/fs/iomap/trace.h
index 4df19c66f597..5693a39d52fb 100644
--- a/fs/iomap/trace.h
+++ b/fs/iomap/trace.h
@@ -39,7 +39,7 @@ DEFINE_EVENT(iomap_readpage_class, name,	\
 	TP_PROTO(struct inode *inode, int nr_pages), \
 	TP_ARGS(inode, nr_pages))
 DEFINE_READPAGE_EVENT(iomap_readpage);
-DEFINE_READPAGE_EVENT(iomap_readpages);
+DEFINE_READPAGE_EVENT(iomap_readahead);
 
 DECLARE_EVENT_CLASS(iomap_range_class,
 	TP_PROTO(struct inode *inode, unsigned long off, unsigned int len),
diff --git a/fs/isofs/Kconfig b/fs/isofs/Kconfig
index 5e7419599f50..08ffd37b9bb8 100644
--- a/fs/isofs/Kconfig
+++ b/fs/isofs/Kconfig
@@ -8,7 +8,7 @@ config ISO9660_FS
 	  long Unix filenames and symbolic links are also supported by this
 	  driver.  If you have a CD-ROM drive and want to do more with it than
 	  just listen to audio CDs and watch its LEDs, say Y (and read
-	  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
+	  <file:Documentation/filesystems/isofs.rst> and the CD-ROM-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>), thereby
 	  enlarging your kernel by about 27 KB; otherwise say N.
 
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 62c0462dc89f..95b1f377ad09 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -1185,10 +1185,9 @@ static int isofs_readpage(struct file *file, struct page *page)
 	return mpage_readpage(page, isofs_get_block);
 }
 
-static int isofs_readpages(struct file *file, struct address_space *mapping,
-			struct list_head *pages, unsigned nr_pages)
+static void isofs_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, isofs_get_block);
+	mpage_readahead(rac, isofs_get_block);
 }
 
 static sector_t _isofs_bmap(struct address_space *mapping, sector_t block)
@@ -1198,7 +1197,7 @@ static sector_t _isofs_bmap(struct address_space *mapping, sector_t block)
 
 static const struct address_space_operations isofs_aops = {
 	.readpage = isofs_readpage,
-	.readpages = isofs_readpages,
+	.readahead = isofs_readahead,
 	.bmap = _isofs_bmap
 };
 
diff --git a/fs/isofs/rock.h b/fs/isofs/rock.h
index 1558cf22ef8a..ee9660e9671c 100644
--- a/fs/isofs/rock.h
+++ b/fs/isofs/rock.h
@@ -22,7 +22,7 @@ struct SU_ER_s {
 	__u8 len_des;
 	__u8 len_src;
 	__u8 ext_ver;
-	__u8 data[0];
+	__u8 data[];
 } __attribute__ ((packed));
 
 struct RR_RR_s {
@@ -44,7 +44,7 @@ struct RR_PN_s {
 struct SL_component {
 	__u8 flags;
 	__u8 len;
-	__u8 text[0];
+	__u8 text[];
 } __attribute__ ((packed));
 
 struct RR_SL_s {
@@ -54,7 +54,7 @@ struct RR_SL_s {
 
 struct RR_NM_s {
 	__u8 flags;
-	char name[0];
+	char name[];
 } __attribute__ ((packed));
 
 struct RR_CL_s {
@@ -71,7 +71,7 @@ struct stamp {
 
 struct RR_TF_s {
 	__u8 flags;
-	struct stamp times[0];	/* Variable number of these beasts */
+	struct stamp times[];	/* Variable number of these beasts */
 } __attribute__ ((packed));
 
 /* Linux-specific extension for transparent decompression */
diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
index 0637271f3770..8ff4d1a1e774 100644
--- a/fs/jffs2/nodelist.h
+++ b/fs/jffs2/nodelist.h
@@ -259,7 +259,7 @@ struct jffs2_full_dirent
 	uint32_t ino; /* == zero for unlink */
 	unsigned int nhash;
 	unsigned char type;
-	unsigned char name[0];
+	unsigned char name[];
 };
 
 /*
diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h
index 60207a2ae952..e4131cb1f1d4 100644
--- a/fs/jffs2/summary.h
+++ b/fs/jffs2/summary.h
@@ -61,7 +61,7 @@ struct jffs2_sum_dirent_flash
 	jint32_t ino; 		/* == zero for unlink */
 	uint8_t nsize;		/* dirent name size */
 	uint8_t type;		/* dirent type */
-	uint8_t name[0];	/* dirent name */
+	uint8_t name[];	/* dirent name */
 } __attribute__((packed));
 
 struct jffs2_sum_xattr_flash
@@ -117,7 +117,7 @@ struct jffs2_sum_dirent_mem
 	jint32_t ino; 		/* == zero for unlink */
 	uint8_t nsize;		/* dirent name size */
 	uint8_t type;		/* dirent type */
-	uint8_t name[0];	/* dirent name */
+	uint8_t name[];	/* dirent name */
 } __attribute__((packed));
 
 struct jffs2_sum_xattr_mem
diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c
index 9486afcdac76..6f65bfa9f18d 100644
--- a/fs/jfs/inode.c
+++ b/fs/jfs/inode.c
@@ -296,10 +296,9 @@ static int jfs_readpage(struct file *file, struct page *page)
 	return mpage_readpage(page, jfs_get_block);
 }
 
-static int jfs_readpages(struct file *file, struct address_space *mapping,
-		struct list_head *pages, unsigned nr_pages)
+static void jfs_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, jfs_get_block);
+	mpage_readahead(rac, jfs_get_block);
 }
 
 static void jfs_write_failed(struct address_space *mapping, loff_t to)
@@ -358,7 +357,7 @@ static ssize_t jfs_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
 
 const struct address_space_operations jfs_aops = {
 	.readpage	= jfs_readpage,
-	.readpages	= jfs_readpages,
+	.readahead	= jfs_readahead,
 	.writepage	= jfs_writepage,
 	.writepages	= jfs_writepages,
 	.write_begin	= jfs_write_begin,
diff --git a/fs/jfs/jfs_dtree.c b/fs/jfs/jfs_dtree.c
index 3acc954f7c04..837d42f61464 100644
--- a/fs/jfs/jfs_dtree.c
+++ b/fs/jfs/jfs_dtree.c
@@ -2964,7 +2964,7 @@ struct jfs_dirent {
 	loff_t position;
 	int ino;
 	u16 name_len;
-	char name[0];
+	char name[];
 };
 
 /*
diff --git a/fs/jfs/jfs_xattr.h b/fs/jfs/jfs_xattr.h
index f0558b3348da..c50167a7bc50 100644
--- a/fs/jfs/jfs_xattr.h
+++ b/fs/jfs/jfs_xattr.h
@@ -17,12 +17,12 @@ struct jfs_ea {
 	u8 flag;	/* Unused? */
 	u8 namelen;	/* Length of name */
 	__le16 valuelen;	/* Length of value */
-	char name[0];	/* Attribute name (includes null-terminator) */
+	char name[];	/* Attribute name (includes null-terminator) */
 };			/* Value immediately follows name */
 
 struct jfs_ea_list {
 	__le32 size;		/* overall size */
-	struct jfs_ea ea[0];	/* Variable length list */
+	struct jfs_ea ea[];	/* Variable length list */
 };
 
 /* Macros for defining maxiumum number of bytes supported for EAs */
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 34366db3620d..fd6ddfe4cd94 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -1010,7 +1010,7 @@ struct kernfs_node *__kernfs_create_file(struct kernfs_node *parent,
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 	if (key) {
-		lockdep_init_map(&kn->dep_map, "kn->count", key, 0);
+		lockdep_init_map(&kn->dep_map, "kn->active", key, 0);
 		kn->flags |= KERNFS_LOCKDEP;
 	}
 #endif
diff --git a/fs/locks.c b/fs/locks.c
index b8a31c1c4fff..399c5dbb72c4 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -2823,7 +2823,7 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
 {
 	struct inode *inode = NULL;
 	unsigned int fl_pid;
-	struct pid_namespace *proc_pidns = file_inode(f->file)->i_sb->s_fs_info;
+	struct pid_namespace *proc_pidns = proc_pid_ns(file_inode(f->file));
 
 	fl_pid = locks_translate_pid(fl, proc_pidns);
 	/*
@@ -2901,7 +2901,7 @@ static int locks_show(struct seq_file *f, void *v)
 {
 	struct locks_iterator *iter = f->private;
 	struct file_lock *fl, *bfl;
-	struct pid_namespace *proc_pidns = file_inode(f->file)->i_sb->s_fs_info;
+	struct pid_namespace *proc_pidns = proc_pid_ns(file_inode(f->file));
 
 	fl = hlist_entry(v, struct file_lock, fl_link);
 
diff --git a/fs/mpage.c b/fs/mpage.c
index ccba3c4c4479..830e6cc2a9e7 100644
--- a/fs/mpage.c
+++ b/fs/mpage.c
@@ -91,7 +91,7 @@ mpage_alloc(struct block_device *bdev,
 }
 
 /*
- * support function for mpage_readpages.  The fs supplied get_block might
+ * support function for mpage_readahead.  The fs supplied get_block might
  * return an up to date buffer.  This is used to map that buffer into
  * the page, which allows readpage to avoid triggering a duplicate call
  * to get_block.
@@ -338,13 +338,8 @@ static struct bio *do_mpage_readpage(struct mpage_readpage_args *args)
 }
 
 /**
- * mpage_readpages - populate an address space with some pages & start reads against them
- * @mapping: the address_space
- * @pages: The address of a list_head which contains the target pages.  These
- *   pages have their ->index populated and are otherwise uninitialised.
- *   The page at @pages->prev has the lowest file offset, and reads should be
- *   issued in @pages->prev to @pages->next order.
- * @nr_pages: The number of pages at *@pages
+ * mpage_readahead - start reads against pages
+ * @rac: Describes which pages to read.
  * @get_block: The filesystem's block mapper function.
  *
  * This function walks the pages and the blocks within each page, building and
@@ -381,36 +376,25 @@ static struct bio *do_mpage_readpage(struct mpage_readpage_args *args)
  *
  * This all causes the disk requests to be issued in the correct order.
  */
-int
-mpage_readpages(struct address_space *mapping, struct list_head *pages,
-				unsigned nr_pages, get_block_t get_block)
+void mpage_readahead(struct readahead_control *rac, get_block_t get_block)
 {
+	struct page *page;
 	struct mpage_readpage_args args = {
 		.get_block = get_block,
 		.is_readahead = true,
 	};
-	unsigned page_idx;
-
-	for (page_idx = 0; page_idx < nr_pages; page_idx++) {
-		struct page *page = lru_to_page(pages);
 
+	while ((page = readahead_page(rac))) {
 		prefetchw(&page->flags);
-		list_del(&page->lru);
-		if (!add_to_page_cache_lru(page, mapping,
-					page->index,
-					readahead_gfp_mask(mapping))) {
-			args.page = page;
-			args.nr_pages = nr_pages - page_idx;
-			args.bio = do_mpage_readpage(&args);
-		}
+		args.page = page;
+		args.nr_pages = readahead_count(rac);
+		args.bio = do_mpage_readpage(&args);
 		put_page(page);
 	}
-	BUG_ON(!list_empty(pages));
 	if (args.bio)
 		mpage_bio_submit(REQ_OP_READ, REQ_RAHEAD, args.bio);
-	return 0;
 }
-EXPORT_SYMBOL(mpage_readpages);
+EXPORT_SYMBOL(mpage_readahead);
 
 /*
  * This isn't called much at all
@@ -563,7 +547,7 @@ static int __mpage_writepage(struct page *page, struct writeback_control *wbc,
 		 * Page has buffers, but they are all unmapped. The page was
 		 * created by pagein or read over a hole which was handled by
 		 * block_read_full_page().  If this address_space is also
-		 * using mpage_readpages then this can rarely happen.
+		 * using mpage_readahead then this can rarely happen.
 		 */
 		goto confused;
 	}
diff --git a/fs/namespace.c b/fs/namespace.c
index a28e4db075ed..894a1d12fe5f 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -669,9 +669,6 @@ bool __is_local_mountpoint(struct dentry *dentry)
 	struct mount *mnt;
 	bool is_covered = false;
 
-	if (!d_mountpoint(dentry))
-		goto out;
-
 	down_read(&namespace_sem);
 	list_for_each_entry(mnt, &ns->list, mnt_list) {
 		is_covered = (mnt->mnt_mountpoint == dentry);
@@ -679,7 +676,7 @@ bool __is_local_mountpoint(struct dentry *dentry)
 			break;
 	}
 	up_read(&namespace_sem);
-out:
+
 	return is_covered;
 }
 
@@ -3595,7 +3592,7 @@ EXPORT_SYMBOL(path_is_under);
  * file system may be mounted on put_old. After all, new_root is a mountpoint.
  *
  * Also, the current root cannot be on the 'rootfs' (initial ramfs) filesystem.
- * See Documentation/filesystems/ramfs-rootfs-initramfs.txt for alternatives
+ * See Documentation/filesystems/ramfs-rootfs-initramfs.rst for alternatives
  * in this situation.
  *
  * Notes:
diff --git a/fs/nfs/blocklayout/extent_tree.c b/fs/nfs/blocklayout/extent_tree.c
index 7a57ff2528af..8f7cff7a4293 100644
--- a/fs/nfs/blocklayout/extent_tree.c
+++ b/fs/nfs/blocklayout/extent_tree.c
@@ -582,7 +582,7 @@ ext_tree_prepare_commit(struct nfs4_layoutcommit_args *arg)
 		if (!arg->layoutupdate_pages)
 			return -ENOMEM;
 
-		start_p = __vmalloc(buffer_size, GFP_NOFS, PAGE_KERNEL);
+		start_p = __vmalloc(buffer_size, GFP_NOFS);
 		if (!start_p) {
 			kfree(arg->layoutupdate_pages);
 			return -ENOMEM;
diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index c5c3fc6e6c60..26c94b32d6f4 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -253,37 +253,45 @@ int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
 
 int nfs3_set_acl(struct inode *inode, struct posix_acl *acl, int type)
 {
-	struct posix_acl *alloc = NULL, *dfacl = NULL;
+	struct posix_acl *orig = acl, *dfacl = NULL, *alloc;
 	int status;
 
 	if (S_ISDIR(inode->i_mode)) {
 		switch(type) {
 		case ACL_TYPE_ACCESS:
-			alloc = dfacl = get_acl(inode, ACL_TYPE_DEFAULT);
+			alloc = get_acl(inode, ACL_TYPE_DEFAULT);
 			if (IS_ERR(alloc))
 				goto fail;
+			dfacl = alloc;
 			break;
 
 		case ACL_TYPE_DEFAULT:
-			dfacl = acl;
-			alloc = acl = get_acl(inode, ACL_TYPE_ACCESS);
+			alloc = get_acl(inode, ACL_TYPE_ACCESS);
 			if (IS_ERR(alloc))
 				goto fail;
+			dfacl = acl;
+			acl = alloc;
 			break;
 		}
 	}
 
 	if (acl == NULL) {
-		alloc = acl = posix_acl_from_mode(inode->i_mode, GFP_KERNEL);
+		alloc = posix_acl_from_mode(inode->i_mode, GFP_KERNEL);
 		if (IS_ERR(alloc))
 			goto fail;
+		acl = alloc;
 	}
 	status = __nfs3_proc_setacls(inode, acl, dfacl);
-	posix_acl_release(alloc);
+out:
+	if (acl != orig)
+		posix_acl_release(acl);
+	if (dfacl != orig)
+		posix_acl_release(dfacl);
 	return status;
 
 fail:
-	return PTR_ERR(alloc);
+	status = PTR_ERR(alloc);
+	goto out;
 }
 
 const struct xattr_handler *nfs3_xattr_handlers[] = {
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index b8d78f393365..dd2e14f5875d 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -1332,13 +1332,15 @@ _pnfs_return_layout(struct inode *ino)
 			!valid_layout) {
 		spin_unlock(&ino->i_lock);
 		dprintk("NFS: %s no layout segments to return\n", __func__);
-		goto out_put_layout_hdr;
+		goto out_wait_layoutreturn;
 	}
 
 	send = pnfs_prepare_layoutreturn(lo, &stateid, &cred, NULL);
 	spin_unlock(&ino->i_lock);
 	if (send)
 		status = pnfs_send_layoutreturn(lo, &stateid, &cred, IOMODE_ANY, true);
+out_wait_layoutreturn:
+	wait_on_bit(&lo->plh_flags, NFS_LAYOUT_RETURN, TASK_UNINTERRUPTIBLE);
 out_put_layout_hdr:
 	pnfs_free_lseg_list(&tmp_list);
 	pnfs_put_layout_hdr(lo);
@@ -1456,18 +1458,15 @@ bool pnfs_roc(struct inode *ino,
 	/* lo ref dropped in pnfs_roc_release() */
 	layoutreturn = pnfs_prepare_layoutreturn(lo, &stateid, &lc_cred, &iomode);
 	/* If the creds don't match, we can't compound the layoutreturn */
-	if (!layoutreturn)
+	if (!layoutreturn || cred_fscmp(cred, lc_cred) != 0)
 		goto out_noroc;
-	if (cred_fscmp(cred, lc_cred) != 0)
-		goto out_noroc_put_cred;
 
 	roc = layoutreturn;
 	pnfs_init_layoutreturn_args(args, lo, &stateid, iomode);
 	res->lrs_present = 0;
 	layoutreturn = false;
-
-out_noroc_put_cred:
 	put_cred(lc_cred);
+
 out_noroc:
 	spin_unlock(&ino->i_lock);
 	rcu_read_unlock();
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 671085512e0f..ceeb3b441844 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -145,18 +145,9 @@ static int nilfs_readpage(struct file *file, struct page *page)
 	return mpage_readpage(page, nilfs_get_block);
 }
 
-/**
- * nilfs_readpages() - implement readpages() method of nilfs_aops {}
- * address_space_operations.
- * @file - file struct of the file to be read
- * @mapping - address_space struct used for reading multiple pages
- * @pages - the pages to be read
- * @nr_pages - number of pages to be read
- */
-static int nilfs_readpages(struct file *file, struct address_space *mapping,
-			   struct list_head *pages, unsigned int nr_pages)
+static void nilfs_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, nilfs_get_block);
+	mpage_readahead(rac, nilfs_get_block);
 }
 
 static int nilfs_writepages(struct address_space *mapping,
@@ -308,7 +299,7 @@ const struct address_space_operations nilfs_aops = {
 	.readpage		= nilfs_readpage,
 	.writepages		= nilfs_writepages,
 	.set_page_dirty		= nilfs_set_page_dirty,
-	.readpages		= nilfs_readpages,
+	.readahead		= nilfs_readahead,
 	.write_begin		= nilfs_write_begin,
 	.write_end		= nilfs_write_end,
 	/* .releasepage		= nilfs_releasepage, */
diff --git a/fs/notify/fanotify/fanotify.h b/fs/notify/fanotify/fanotify.h
index 35bfbf4a7aac..8ce7ccfc4b0d 100644
--- a/fs/notify/fanotify/fanotify.h
+++ b/fs/notify/fanotify/fanotify.h
@@ -89,7 +89,7 @@ struct fanotify_name_event {
 	__kernel_fsid_t fsid;
 	struct fanotify_fh dir_fh;
 	u8 name_len;
-	char name[0];
+	char name[];
 };
 
 static inline struct fanotify_name_event *
diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig
index 6736e47d94d8..7715fadd5fff 100644
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
@@ -12,6 +12,6 @@ config INOTIFY_USER
 	  new features including multiple file events, one-shot support, and
 	  unmount notification.
 
-	  For more information, see <file:Documentation/filesystems/inotify.txt>
+	  For more information, see <file:Documentation/filesystems/inotify.rst>
 
 	  If unsure, say Y.
diff --git a/fs/ntfs/Kconfig b/fs/ntfs/Kconfig
index de9fb5cff226..1667a7e590d8 100644
--- a/fs/ntfs/Kconfig
+++ b/fs/ntfs/Kconfig
@@ -18,7 +18,7 @@ config NTFS_FS
 	  the Linux 2.4 kernel series is separately available as a patch
 	  from the project web site.
 
-	  For more information see <file:Documentation/filesystems/ntfs.txt>
+	  For more information see <file:Documentation/filesystems/ntfs.rst>
 	  and <http://www.linux-ntfs.org/>.
 
 	  To compile this file system support as a module, choose M here: the
diff --git a/fs/ntfs/malloc.h b/fs/ntfs/malloc.h
index 842b0bfc3ac9..7068425735f1 100644
--- a/fs/ntfs/malloc.h
+++ b/fs/ntfs/malloc.h
@@ -34,7 +34,7 @@ static inline void *__ntfs_malloc(unsigned long size, gfp_t gfp_mask)
 		/* return (void *)__get_free_page(gfp_mask); */
 	}
 	if (likely((size >> PAGE_SHIFT) < totalram_pages()))
-		return __vmalloc(size, gfp_mask, PAGE_KERNEL);
+		return __vmalloc(size, gfp_mask);
 	return NULL;
 }
 
diff --git a/fs/ocfs2/Kconfig b/fs/ocfs2/Kconfig
index 46bba20da6b5..1177c33df895 100644
--- a/fs/ocfs2/Kconfig
+++ b/fs/ocfs2/Kconfig
@@ -21,7 +21,7 @@ config OCFS2_FS
 	  OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
 
 	  For more information on OCFS2, see the file
-	  <file:Documentation/filesystems/ocfs2.txt>.
+	  <file:Documentation/filesystems/ocfs2.rst>.
 
 config OCFS2_FS_O2CB
 	tristate "O2CB Kernelspace Clustering"
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 3a67a6518ddf..3bfb4147895a 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -350,14 +350,11 @@ static int ocfs2_readpage(struct file *file, struct page *page)
  * grow out to a tree. If need be, detecting boundary extents could
  * trivially be added in a future version of ocfs2_get_block().
  */
-static int ocfs2_readpages(struct file *filp, struct address_space *mapping,
-			   struct list_head *pages, unsigned nr_pages)
+static void ocfs2_readahead(struct readahead_control *rac)
 {
-	int ret, err = -EIO;
-	struct inode *inode = mapping->host;
+	int ret;
+	struct inode *inode = rac->mapping->host;
 	struct ocfs2_inode_info *oi = OCFS2_I(inode);
-	loff_t start;
-	struct page *last;
 
 	/*
 	 * Use the nonblocking flag for the dlm code to avoid page
@@ -365,36 +362,31 @@ static int ocfs2_readpages(struct file *filp, struct address_space *mapping,
 	 */
 	ret = ocfs2_inode_lock_full(inode, NULL, 0, OCFS2_LOCK_NONBLOCK);
 	if (ret)
-		return err;
+		return;
 
-	if (down_read_trylock(&oi->ip_alloc_sem) == 0) {
-		ocfs2_inode_unlock(inode, 0);
-		return err;
-	}
+	if (down_read_trylock(&oi->ip_alloc_sem) == 0)
+		goto out_unlock;
 
 	/*
 	 * Don't bother with inline-data. There isn't anything
 	 * to read-ahead in that case anyway...
 	 */
 	if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
-		goto out_unlock;
+		goto out_up;
 
 	/*
 	 * Check whether a remote node truncated this file - we just
 	 * drop out in that case as it's not worth handling here.
 	 */
-	last = lru_to_page(pages);
-	start = (loff_t)last->index << PAGE_SHIFT;
-	if (start >= i_size_read(inode))
-		goto out_unlock;
+	if (readahead_pos(rac) >= i_size_read(inode))
+		goto out_up;
 
-	err = mpage_readpages(mapping, pages, nr_pages, ocfs2_get_block);
+	mpage_readahead(rac, ocfs2_get_block);
 
-out_unlock:
+out_up:
 	up_read(&oi->ip_alloc_sem);
+out_unlock:
 	ocfs2_inode_unlock(inode, 0);
-
-	return err;
 }
 
 /* Note: Because we don't support holes, our allocation has
@@ -2474,7 +2466,7 @@ static ssize_t ocfs2_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
 
 const struct address_space_operations ocfs2_aops = {
 	.readpage		= ocfs2_readpage,
-	.readpages		= ocfs2_readpages,
+	.readahead		= ocfs2_readahead,
 	.writepage		= ocfs2_writepage,
 	.write_begin		= ocfs2_write_begin,
 	.write_end		= ocfs2_write_end,
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 55a6512e9fde..f105746063ed 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -2760,6 +2760,7 @@ static int dlm_migrate_lockres(struct dlm_ctxt *dlm,
  * Returns: 1 if dlm->spinlock was dropped/retaken, 0 if never dropped
  */
 int dlm_empty_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res)
+	__must_hold(&dlm->spinlock)
 {
 	int ret;
 	int lock_dropped = 0;
diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c
index 8e4f1ace467c..1de77f1a600b 100644
--- a/fs/ocfs2/dlmfs/dlmfs.c
+++ b/fs/ocfs2/dlmfs/dlmfs.c
@@ -275,7 +275,6 @@ static ssize_t dlmfs_file_write(struct file *filp,
 				loff_t *ppos)
 {
 	int bytes_left;
-	ssize_t writelen;
 	char *lvb_buf;
 	struct inode *inode = file_inode(filp);
 
@@ -285,32 +284,30 @@ static ssize_t dlmfs_file_write(struct file *filp,
 	if (*ppos >= i_size_read(inode))
 		return -ENOSPC;
 
+	/* don't write past the lvb */
+	if (count > i_size_read(inode) - *ppos)
+		count = i_size_read(inode) - *ppos;
+
 	if (!count)
 		return 0;
 
 	if (!access_ok(buf, count))
 		return -EFAULT;
 
-	/* don't write past the lvb */
-	if ((count + *ppos) > i_size_read(inode))
-		writelen = i_size_read(inode) - *ppos;
-	else
-		writelen = count - *ppos;
-
-	lvb_buf = kmalloc(writelen, GFP_NOFS);
+	lvb_buf = kmalloc(count, GFP_NOFS);
 	if (!lvb_buf)
 		return -ENOMEM;
 
-	bytes_left = copy_from_user(lvb_buf, buf, writelen);
-	writelen -= bytes_left;
-	if (writelen)
-		user_dlm_write_lvb(inode, lvb_buf, writelen);
+	bytes_left = copy_from_user(lvb_buf, buf, count);
+	count -= bytes_left;
+	if (count)
+		user_dlm_write_lvb(inode, lvb_buf, count);
 
 	kfree(lvb_buf);
 
-	*ppos = *ppos + writelen;
-	mlog(0, "wrote %zd bytes\n", writelen);
-	return writelen;
+	*ppos = *ppos + count;
+	mlog(0, "wrote %zu bytes\n", count);
+	return count;
 }
 
 static void dlmfs_init_once(void *foo)
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 9150cfa4df7d..ee5d98516212 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -279,6 +279,7 @@ enum ocfs2_mount_options
 	OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT = 1 << 15,  /* Journal Async Commit */
 	OCFS2_MOUNT_ERRORS_CONT = 1 << 16, /* Return EIO to the calling process on error */
 	OCFS2_MOUNT_ERRORS_ROFS = 1 << 17, /* Change filesystem to read-only on error */
+	OCFS2_MOUNT_NOCLUSTER = 1 << 18, /* No cluster aware filesystem mount */
 };
 
 #define OCFS2_OSB_SOFT_RO	0x0001
@@ -673,7 +674,8 @@ static inline int ocfs2_cluster_o2cb_global_heartbeat(struct ocfs2_super *osb)
 
 static inline int ocfs2_mount_local(struct ocfs2_super *osb)
 {
-	return (osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT);
+	return ((osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT)
+		|| (osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER));
 }
 
 static inline int ocfs2_uses_extended_slot_map(struct ocfs2_super *osb)
diff --git a/fs/ocfs2/slot_map.c b/fs/ocfs2/slot_map.c
index 8caeceeaeda7..4da0e4b1e79b 100644
--- a/fs/ocfs2/slot_map.c
+++ b/fs/ocfs2/slot_map.c
@@ -254,14 +254,16 @@ static int __ocfs2_find_empty_slot(struct ocfs2_slot_info *si,
 	int i, ret = -ENOSPC;
 
 	if ((preferred >= 0) && (preferred < si->si_num_slots)) {
-		if (!si->si_slots[preferred].sl_valid) {
+		if (!si->si_slots[preferred].sl_valid ||
+		    !si->si_slots[preferred].sl_node_num) {
 			ret = preferred;
 			goto out;
 		}
 	}
 
 	for(i = 0; i < si->si_num_slots; i++) {
-		if (!si->si_slots[i].sl_valid) {
+		if (!si->si_slots[i].sl_valid ||
+		    !si->si_slots[i].sl_node_num) {
 			ret = i;
 			break;
 		}
@@ -456,24 +458,30 @@ int ocfs2_find_slot(struct ocfs2_super *osb)
 	spin_lock(&osb->osb_lock);
 	ocfs2_update_slot_info(si);
 
-	/* search for ourselves first and take the slot if it already
-	 * exists. Perhaps we need to mark this in a variable for our
-	 * own journal recovery? Possibly not, though we certainly
-	 * need to warn to the user */
-	slot = __ocfs2_node_num_to_slot(si, osb->node_num);
-	if (slot < 0) {
-		/* if no slot yet, then just take 1st available
-		 * one. */
-		slot = __ocfs2_find_empty_slot(si, osb->preferred_slot);
+	if (ocfs2_mount_local(osb))
+		/* use slot 0 directly in local mode */
+		slot = 0;
+	else {
+		/* search for ourselves first and take the slot if it already
+		 * exists. Perhaps we need to mark this in a variable for our
+		 * own journal recovery? Possibly not, though we certainly
+		 * need to warn to the user */
+		slot = __ocfs2_node_num_to_slot(si, osb->node_num);
 		if (slot < 0) {
-			spin_unlock(&osb->osb_lock);
-			mlog(ML_ERROR, "no free slots available!\n");
-			status = -EINVAL;
-			goto bail;
-		}
-	} else
-		printk(KERN_INFO "ocfs2: Slot %d on device (%s) was already "
-		       "allocated to this node!\n", slot, osb->dev_str);
+			/* if no slot yet, then just take 1st available
+			 * one. */
+			slot = __ocfs2_find_empty_slot(si, osb->preferred_slot);
+			if (slot < 0) {
+				spin_unlock(&osb->osb_lock);
+				mlog(ML_ERROR, "no free slots available!\n");
+				status = -EINVAL;
+				goto bail;
+			}
+		} else
+			printk(KERN_INFO "ocfs2: Slot %d on device (%s) was "
+			       "already allocated to this node!\n",
+			       slot, osb->dev_str);
+	}
 
 	ocfs2_set_slot(si, slot, osb->node_num);
 	osb->slot_num = slot;
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index ac61eeaf3837..71ea9ce71a6b 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -175,6 +175,7 @@ enum {
 	Opt_dir_resv_level,
 	Opt_journal_async_commit,
 	Opt_err_cont,
+	Opt_nocluster,
 	Opt_err,
 };
 
@@ -208,6 +209,7 @@ static const match_table_t tokens = {
 	{Opt_dir_resv_level, "dir_resv_level=%u"},
 	{Opt_journal_async_commit, "journal_async_commit"},
 	{Opt_err_cont, "errors=continue"},
+	{Opt_nocluster, "nocluster"},
 	{Opt_err, NULL}
 };
 
@@ -619,6 +621,13 @@ static int ocfs2_remount(struct super_block *sb, int *flags, char *data)
 		goto out;
 	}
 
+	tmp = OCFS2_MOUNT_NOCLUSTER;
+	if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) {
+		ret = -EINVAL;
+		mlog(ML_ERROR, "Cannot change nocluster option on remount\n");
+		goto out;
+	}
+
 	tmp = OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL |
 		OCFS2_MOUNT_HB_NONE;
 	if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) {
@@ -859,6 +868,7 @@ static int ocfs2_verify_userspace_stack(struct ocfs2_super *osb,
 	}
 
 	if (ocfs2_userspace_stack(osb) &&
+	    !(osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER) &&
 	    strncmp(osb->osb_cluster_stack, mopt->cluster_stack,
 		    OCFS2_STACK_LABEL_LEN)) {
 		mlog(ML_ERROR,
@@ -1139,6 +1149,11 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 	       osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK ? "writeback" :
 	       "ordered");
 
+	if ((osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER) &&
+	   !(osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT))
+		printk(KERN_NOTICE "ocfs2: The shared device (%s) is mounted "
+		       "without cluster aware mode.\n", osb->dev_str);
+
 	atomic_set(&osb->vol_state, VOLUME_MOUNTED);
 	wake_up(&osb->osb_mount_event);
 
@@ -1445,6 +1460,9 @@ static int ocfs2_parse_options(struct super_block *sb,
 		case Opt_journal_async_commit:
 			mopt->mount_opt |= OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT;
 			break;
+		case Opt_nocluster:
+			mopt->mount_opt |= OCFS2_MOUNT_NOCLUSTER;
+			break;
 		default:
 			mlog(ML_ERROR,
 			     "Unrecognized mount option \"%s\" "
@@ -1556,6 +1574,9 @@ static int ocfs2_show_options(struct seq_file *s, struct dentry *root)
 	if (opts & OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT)
 		seq_printf(s, ",journal_async_commit");
 
+	if (opts & OCFS2_MOUNT_NOCLUSTER)
+		seq_printf(s, ",nocluster");
+
 	return 0;
 }
 
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index d640b9388238..d7b5f09d298c 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -289,10 +289,9 @@ static int omfs_readpage(struct file *file, struct page *page)
 	return block_read_full_page(page, omfs_get_block);
 }
 
-static int omfs_readpages(struct file *file, struct address_space *mapping,
-		struct list_head *pages, unsigned nr_pages)
+static void omfs_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, omfs_get_block);
+	mpage_readahead(rac, omfs_get_block);
 }
 
 static int omfs_writepage(struct page *page, struct writeback_control *wbc)
@@ -373,7 +372,7 @@ const struct inode_operations omfs_file_inops = {
 
 const struct address_space_operations omfs_aops = {
 	.readpage = omfs_readpage,
-	.readpages = omfs_readpages,
+	.readahead = omfs_readahead,
 	.writepage = omfs_writepage,
 	.writepages = omfs_writepages,
 	.write_begin = omfs_write_begin,
diff --git a/fs/open.c b/fs/open.c
index 719b320ede52..d9467a8a7f6a 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -743,9 +743,8 @@ static int do_dentry_open(struct file *f,
 	path_get(&f->f_path);
 	f->f_inode = inode;
 	f->f_mapping = inode->i_mapping;
-
-	/* Ensure that we skip any errors that predate opening of the file */
 	f->f_wb_err = filemap_sample_wb_err(f->f_mapping);
+	f->f_sb_err = file_sample_sb_err(f);
 
 	if (unlikely(f->f_flags & O_PATH)) {
 		f->f_mode = FMODE_PATH | FMODE_OPENED;
diff --git a/fs/overlayfs/Kconfig b/fs/overlayfs/Kconfig
index 714c14c47ca5..dd188c7996b3 100644
--- a/fs/overlayfs/Kconfig
+++ b/fs/overlayfs/Kconfig
@@ -9,7 +9,7 @@ config OVERLAY_FS
 	  'lower' filesystem is either hidden or, in the case of directories,
 	  merged with the 'upper' object.
 
-	  For more information see Documentation/filesystems/overlayfs.txt
+	  For more information see Documentation/filesystems/overlayfs.rst
 
 config OVERLAY_FS_REDIRECT_DIR
 	bool "Overlayfs: turn on redirect directory feature by default"
@@ -38,7 +38,7 @@ config OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW
 	  If backward compatibility is not an issue, then it is safe and
 	  recommended to say N here.
 
-	  For more information, see Documentation/filesystems/overlayfs.txt
+	  For more information, see Documentation/filesystems/overlayfs.rst
 
 	  If unsure, say Y.
 
@@ -103,7 +103,7 @@ config OVERLAY_FS_XINO_AUTO
 	  If compatibility with applications that expect 32bit inodes is not an
 	  issue, then it is safe and recommended to say Y here.
 
-	  For more information, see Documentation/filesystems/overlayfs.txt
+	  For more information, see Documentation/filesystems/overlayfs.rst
 
 	  If unsure, say N.
 
diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index 9709cf22cab3..66004534bd40 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -584,9 +584,10 @@ static int ovl_copy_up_workdir(struct ovl_copy_up_ctx *c)
 		.link = c->link
 	};
 
-	err = ovl_lock_rename_workdir(c->workdir, c->destdir);
-	if (err)
-		return err;
+	/* workdir and destdir could be the same when copying up to indexdir */
+	err = -EIO;
+	if (lock_rename(c->workdir, c->destdir) != NULL)
+		goto unlock;
 
 	err = ovl_prep_cu_creds(c->dentry, &cc);
 	if (err)
diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c
index 279009dee366..09faa63cf24d 100644
--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -62,35 +62,59 @@ struct dentry *ovl_lookup_temp(struct dentry *workdir)
 }
 
 /* caller holds i_mutex on workdir */
-static struct dentry *ovl_whiteout(struct dentry *workdir)
+static struct dentry *ovl_whiteout(struct ovl_fs *ofs)
 {
 	int err;
 	struct dentry *whiteout;
+	struct dentry *workdir = ofs->workdir;
 	struct inode *wdir = workdir->d_inode;
 
-	whiteout = ovl_lookup_temp(workdir);
-	if (IS_ERR(whiteout))
-		return whiteout;
+	if (!ofs->whiteout) {
+		whiteout = ovl_lookup_temp(workdir);
+		if (IS_ERR(whiteout))
+			goto out;
 
-	err = ovl_do_whiteout(wdir, whiteout);
-	if (err) {
-		dput(whiteout);
-		whiteout = ERR_PTR(err);
+		err = ovl_do_whiteout(wdir, whiteout);
+		if (err) {
+			dput(whiteout);
+			whiteout = ERR_PTR(err);
+			goto out;
+		}
+		ofs->whiteout = whiteout;
 	}
 
+	if (ofs->share_whiteout) {
+		whiteout = ovl_lookup_temp(workdir);
+		if (IS_ERR(whiteout))
+			goto out;
+
+		err = ovl_do_link(ofs->whiteout, wdir, whiteout);
+		if (!err)
+			goto out;
+
+		if (err != -EMLINK) {
+			pr_warn("Failed to link whiteout - disabling whiteout inode sharing(nlink=%u, err=%i)\n",
+				ofs->whiteout->d_inode->i_nlink, err);
+			ofs->share_whiteout = false;
+		}
+		dput(whiteout);
+	}
+	whiteout = ofs->whiteout;
+	ofs->whiteout = NULL;
+out:
 	return whiteout;
 }
 
 /* Caller must hold i_mutex on both workdir and dir */
-int ovl_cleanup_and_whiteout(struct dentry *workdir, struct inode *dir,
+int ovl_cleanup_and_whiteout(struct ovl_fs *ofs, struct inode *dir,
 			     struct dentry *dentry)
 {
-	struct inode *wdir = workdir->d_inode;
+	struct inode *wdir = ofs->workdir->d_inode;
 	struct dentry *whiteout;
 	int err;
 	int flags = 0;
 
-	whiteout = ovl_whiteout(workdir);
+	whiteout = ovl_whiteout(ofs);
 	err = PTR_ERR(whiteout);
 	if (IS_ERR(whiteout))
 		return err;
@@ -715,6 +739,7 @@ static bool ovl_matches_upper(struct dentry *dentry, struct dentry *upper)
 static int ovl_remove_and_whiteout(struct dentry *dentry,
 				   struct list_head *list)
 {
+	struct ovl_fs *ofs = OVL_FS(dentry->d_sb);
 	struct dentry *workdir = ovl_workdir(dentry);
 	struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
 	struct dentry *upper;
@@ -748,7 +773,7 @@ static int ovl_remove_and_whiteout(struct dentry *dentry,
 		goto out_dput_upper;
 	}
 
-	err = ovl_cleanup_and_whiteout(workdir, d_inode(upperdir), upper);
+	err = ovl_cleanup_and_whiteout(ofs, d_inode(upperdir), upper);
 	if (err)
 		goto out_d_drop;
 
diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c
index 0db23baf98e7..723d17744758 100644
--- a/fs/overlayfs/namei.c
+++ b/fs/overlayfs/namei.c
@@ -484,12 +484,6 @@ struct dentry *ovl_index_upper(struct ovl_fs *ofs, struct dentry *index)
 	return upper;
 }
 
-/* Is this a leftover from create/whiteout of directory index entry? */
-static bool ovl_is_temp_index(struct dentry *index)
-{
-	return index->d_name.name[0] == '#';
-}
-
 /*
  * Verify that an index entry name matches the origin file handle stored in
  * OVL_XATTR_ORIGIN and that origin file handle can be decoded to lower path.
@@ -507,11 +501,6 @@ int ovl_verify_index(struct ovl_fs *ofs, struct dentry *index)
 	if (!d_inode(index))
 		return 0;
 
-	/* Cleanup leftover from index create/cleanup attempt */
-	err = -ESTALE;
-	if (ovl_is_temp_index(index))
-		goto fail;
-
 	err = -EINVAL;
 	if (index->d_name.len < sizeof(struct ovl_fb)*2)
 		goto fail;
diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
index e6f3670146ed..76747f5b0517 100644
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -394,8 +394,8 @@ void ovl_cleanup_whiteouts(struct dentry *upper, struct list_head *list);
 void ovl_cache_free(struct list_head *list);
 void ovl_dir_cache_free(struct inode *inode);
 int ovl_check_d_type_supported(struct path *realpath);
-void ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt,
-			 struct dentry *dentry, int level);
+int ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt,
+			struct dentry *dentry, int level);
 int ovl_indexdir_cleanup(struct ovl_fs *ofs);
 
 /* inode.c */
@@ -455,7 +455,7 @@ static inline void ovl_copyflags(struct inode *from, struct inode *to)
 
 /* dir.c */
 extern const struct inode_operations ovl_dir_inode_operations;
-int ovl_cleanup_and_whiteout(struct dentry *workdir, struct inode *dir,
+int ovl_cleanup_and_whiteout(struct ovl_fs *ofs, struct inode *dir,
 			     struct dentry *dentry);
 struct ovl_cattr {
 	dev_t rdev;
diff --git a/fs/overlayfs/ovl_entry.h b/fs/overlayfs/ovl_entry.h
index 5762d802fe01..a8f82fb7ffb4 100644
--- a/fs/overlayfs/ovl_entry.h
+++ b/fs/overlayfs/ovl_entry.h
@@ -68,6 +68,7 @@ struct ovl_fs {
 	/* Did we take the inuse lock? */
 	bool upperdir_locked;
 	bool workdir_locked;
+	bool share_whiteout;
 	/* Traps in ovl inode cache */
 	struct inode *upperdir_trap;
 	struct inode *workbasedir_trap;
@@ -77,6 +78,8 @@ struct ovl_fs {
 	int xino_mode;
 	/* For allocation of non-persistent inode numbers */
 	atomic_long_t last_ino;
+	/* Whiteout dentry cache */
+	struct dentry *whiteout;
 };
 
 static inline struct ovl_fs *OVL_FS(struct super_block *sb)
diff --git a/fs/overlayfs/readdir.c b/fs/overlayfs/readdir.c
index e452ff7d583d..a10b21b562ad 100644
--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -1071,14 +1071,13 @@ static void ovl_workdir_cleanup_recurse(struct path *path, int level)
 	ovl_cache_free(&list);
 }
 
-void ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt,
+int ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt,
 			 struct dentry *dentry, int level)
 {
 	int err;
 
 	if (!d_is_dir(dentry) || level > 1) {
-		ovl_cleanup(dir, dentry);
-		return;
+		return ovl_cleanup(dir, dentry);
 	}
 
 	err = ovl_do_rmdir(dir, dentry);
@@ -1088,8 +1087,10 @@ void ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt,
 		inode_unlock(dir);
 		ovl_workdir_cleanup_recurse(&path, level + 1);
 		inode_lock_nested(dir, I_MUTEX_PARENT);
-		ovl_cleanup(dir, dentry);
+		err = ovl_cleanup(dir, dentry);
 	}
+
+	return err;
 }
 
 int ovl_indexdir_cleanup(struct ovl_fs *ofs)
@@ -1128,6 +1129,13 @@ int ovl_indexdir_cleanup(struct ovl_fs *ofs)
 			index = NULL;
 			break;
 		}
+		/* Cleanup leftover from index create/cleanup attempt */
+		if (index->d_name.name[0] == '#') {
+			err = ovl_workdir_cleanup(dir, path.mnt, index, 1);
+			if (err)
+				break;
+			goto next;
+		}
 		err = ovl_verify_index(ofs, index);
 		if (!err) {
 			goto next;
@@ -1146,7 +1154,7 @@ int ovl_indexdir_cleanup(struct ovl_fs *ofs)
 			 * Whiteout orphan index to block future open by
 			 * handle after overlay nlink dropped to zero.
 			 */
-			err = ovl_cleanup_and_whiteout(indexdir, dir, index);
+			err = ovl_cleanup_and_whiteout(ofs, dir, index);
 		} else {
 			/* Cleanup orphan index entries */
 			err = ovl_cleanup(dir, index);
diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index 732ad5495c92..a88a7badf444 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -217,6 +217,7 @@ static void ovl_free_fs(struct ovl_fs *ofs)
 	iput(ofs->indexdir_trap);
 	iput(ofs->workdir_trap);
 	iput(ofs->upperdir_trap);
+	dput(ofs->whiteout);
 	dput(ofs->indexdir);
 	dput(ofs->workdir);
 	if (ofs->workdir_locked)
@@ -261,8 +262,8 @@ static int ovl_sync_fs(struct super_block *sb, int wait)
 		return 0;
 
 	/*
-	 * If this is a sync(2) call or an emergency sync, all the super blocks
-	 * will be iterated, including upper_sb, so no need to do anything.
+	 * Not called for sync(2) call or an emergency sync (SB_I_SKIP_SYNC).
+	 * All the super blocks will be iterated, including upper_sb.
 	 *
 	 * If this is a syncfs(2) call, then we do need to call
 	 * sync_filesystem() on upper_sb, but enough if we do it when being
@@ -470,6 +471,7 @@ static int ovl_parse_opt(char *opt, struct ovl_config *config)
 	char *p;
 	int err;
 	bool metacopy_opt = false, redirect_opt = false;
+	bool nfs_export_opt = false, index_opt = false;
 
 	config->redirect_mode = kstrdup(ovl_redirect_mode_def(), GFP_KERNEL);
 	if (!config->redirect_mode)
@@ -519,18 +521,22 @@ static int ovl_parse_opt(char *opt, struct ovl_config *config)
 
 		case OPT_INDEX_ON:
 			config->index = true;
+			index_opt = true;
 			break;
 
 		case OPT_INDEX_OFF:
 			config->index = false;
+			index_opt = true;
 			break;
 
 		case OPT_NFS_EXPORT_ON:
 			config->nfs_export = true;
+			nfs_export_opt = true;
 			break;
 
 		case OPT_NFS_EXPORT_OFF:
 			config->nfs_export = false;
+			nfs_export_opt = true;
 			break;
 
 		case OPT_XINO_ON:
@@ -552,6 +558,7 @@ static int ovl_parse_opt(char *opt, struct ovl_config *config)
 
 		case OPT_METACOPY_OFF:
 			config->metacopy = false;
+			metacopy_opt = true;
 			break;
 
 		default:
@@ -601,6 +608,48 @@ static int ovl_parse_opt(char *opt, struct ovl_config *config)
 		}
 	}
 
+	/* Resolve nfs_export -> index dependency */
+	if (config->nfs_export && !config->index) {
+		if (nfs_export_opt && index_opt) {
+			pr_err("conflicting options: nfs_export=on,index=off\n");
+			return -EINVAL;
+		}
+		if (index_opt) {
+			/*
+			 * There was an explicit index=off that resulted
+			 * in this conflict.
+			 */
+			pr_info("disabling nfs_export due to index=off\n");
+			config->nfs_export = false;
+		} else {
+			/* Automatically enable index otherwise. */
+			config->index = true;
+		}
+	}
+
+	/* Resolve nfs_export -> !metacopy dependency */
+	if (config->nfs_export && config->metacopy) {
+		if (nfs_export_opt && metacopy_opt) {
+			pr_err("conflicting options: nfs_export=on,metacopy=on\n");
+			return -EINVAL;
+		}
+		if (metacopy_opt) {
+			/*
+			 * There was an explicit metacopy=on that resulted
+			 * in this conflict.
+			 */
+			pr_info("disabling nfs_export due to metacopy=on\n");
+			config->nfs_export = false;
+		} else {
+			/*
+			 * There was an explicit nfs_export=on that resulted
+			 * in this conflict.
+			 */
+			pr_info("disabling metacopy due to nfs_export=on\n");
+			config->metacopy = false;
+		}
+	}
+
 	return 0;
 }
 
@@ -1052,6 +1101,18 @@ static int ovl_get_upper(struct super_block *sb, struct ovl_fs *ofs,
 	upper_mnt->mnt_flags &= ~(MNT_NOATIME | MNT_NODIRATIME | MNT_RELATIME);
 	ofs->upper_mnt = upper_mnt;
 
+	/*
+	 * Inherit SB_NOSEC flag from upperdir.
+	 *
+	 * This optimization changes behavior when a security related attribute
+	 * (suid/sgid/security.*) is changed on an underlying layer.  This is
+	 * okay because we don't yet have guarantees in that case, but it will
+	 * need careful treatment once we want to honour changes to underlying
+	 * filesystems.
+	 */
+	if (upper_mnt->mnt_sb->s_flags & SB_NOSEC)
+		sb->s_flags |= SB_NOSEC;
+
 	if (ovl_inuse_trylock(ofs->upper_mnt->mnt_root)) {
 		ofs->upperdir_locked = true;
 	} else {
@@ -1716,6 +1777,9 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent)
 	if (!cred)
 		goto out_err;
 
+	/* Is there a reason anyone would want not to share whiteouts? */
+	ofs->share_whiteout = true;
+
 	ofs->config.index = ovl_index_def;
 	ofs->config.nfs_export = ovl_nfs_export_def;
 	ofs->config.xino = ovl_xino_def();
@@ -1777,17 +1841,21 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent)
 		sb->s_flags |= SB_RDONLY;
 
 	if (!(ovl_force_readonly(ofs)) && ofs->config.index) {
+		/* index dir will act also as workdir */
+		dput(ofs->workdir);
+		ofs->workdir = NULL;
+		iput(ofs->workdir_trap);
+		ofs->workdir_trap = NULL;
+
 		err = ovl_get_indexdir(sb, ofs, oe, &upperpath);
 		if (err)
 			goto out_free_oe;
 
 		/* Force r/o mount with no index dir */
-		if (!ofs->indexdir) {
-			dput(ofs->workdir);
-			ofs->workdir = NULL;
+		if (ofs->indexdir)
+			ofs->workdir = dget(ofs->indexdir);
+		else
 			sb->s_flags |= SB_RDONLY;
-		}
-
 	}
 
 	err = ovl_check_overlapping_layers(sb, ofs);
@@ -1818,6 +1886,7 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent)
 	sb->s_xattr = ovl_xattr_handlers;
 	sb->s_fs_info = ofs;
 	sb->s_flags |= SB_POSIXACL;
+	sb->s_iflags |= SB_I_SKIP_SYNC;
 
 	err = -ENOMEM;
 	root_dentry = ovl_get_root(sb, upperpath.dentry, oe);
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c
index 36b60788ee47..01755bc186c9 100644
--- a/fs/overlayfs/util.c
+++ b/fs/overlayfs/util.c
@@ -707,7 +707,8 @@ static void ovl_cleanup_index(struct dentry *dentry)
 		index = NULL;
 	} else if (ovl_index_all(dentry->d_sb)) {
 		/* Whiteout orphan index to block future open by handle */
-		err = ovl_cleanup_and_whiteout(indexdir, dir, index);
+		err = ovl_cleanup_and_whiteout(OVL_FS(dentry->d_sb),
+					       dir, index);
 	} else {
 		/* Cleanup orphan index entries */
 		err = ovl_cleanup(dir, index);
diff --git a/fs/pipe.c b/fs/pipe.c
index 16fb72e9abf7..620a113f92eb 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -24,6 +24,7 @@
 #include <linux/syscalls.h>
 #include <linux/fcntl.h>
 #include <linux/memcontrol.h>
+#include <linux/watch_queue.h>
 
 #include <linux/uaccess.h>
 #include <asm/ioctls.h>
@@ -313,14 +314,44 @@ pipe_read(struct kiocb *iocb, struct iov_iter *to)
 		unsigned int tail = pipe->tail;
 		unsigned int mask = pipe->ring_size - 1;
 
+#ifdef CONFIG_WATCH_QUEUE
+		if (pipe->note_loss) {
+			struct watch_notification n;
+
+			if (total_len < 8) {
+				if (ret == 0)
+					ret = -ENOBUFS;
+				break;
+			}
+
+			n.type = WATCH_TYPE_META;
+			n.subtype = WATCH_META_LOSS_NOTIFICATION;
+			n.info = watch_sizeof(n);
+			if (copy_to_iter(&n, sizeof(n), to) != sizeof(n)) {
+				if (ret == 0)
+					ret = -EFAULT;
+				break;
+			}
+			ret += sizeof(n);
+			total_len -= sizeof(n);
+			pipe->note_loss = false;
+		}
+#endif
+
 		if (!pipe_empty(head, tail)) {
 			struct pipe_buffer *buf = &pipe->bufs[tail & mask];
 			size_t chars = buf->len;
 			size_t written;
 			int error;
 
-			if (chars > total_len)
+			if (chars > total_len) {
+				if (buf->flags & PIPE_BUF_FLAG_WHOLE) {
+					if (ret == 0)
+						ret = -ENOBUFS;
+					break;
+				}
 				chars = total_len;
+			}
 
 			error = pipe_buf_confirm(pipe, buf);
 			if (error) {
@@ -348,6 +379,10 @@ pipe_read(struct kiocb *iocb, struct iov_iter *to)
 			if (!buf->len) {
 				pipe_buf_release(pipe, buf);
 				spin_lock_irq(&pipe->rd_wait.lock);
+#ifdef CONFIG_WATCH_QUEUE
+				if (buf->flags & PIPE_BUF_FLAG_LOSS)
+					pipe->note_loss = true;
+#endif
 				tail++;
 				pipe->tail = tail;
 				spin_unlock_irq(&pipe->rd_wait.lock);
@@ -459,6 +494,13 @@ pipe_write(struct kiocb *iocb, struct iov_iter *from)
 		goto out;
 	}
 
+#ifdef CONFIG_WATCH_QUEUE
+	if (pipe->watch_queue) {
+		ret = -EXDEV;
+		goto out;
+	}
+#endif
+
 	/*
 	 * Only wake up if the pipe started out empty, since
 	 * otherwise there should be no readers waiting.
@@ -628,22 +670,37 @@ static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	int count, head, tail, mask;
 
 	switch (cmd) {
-		case FIONREAD:
-			__pipe_lock(pipe);
-			count = 0;
-			head = pipe->head;
-			tail = pipe->tail;
-			mask = pipe->ring_size - 1;
+	case FIONREAD:
+		__pipe_lock(pipe);
+		count = 0;
+		head = pipe->head;
+		tail = pipe->tail;
+		mask = pipe->ring_size - 1;
 
-			while (tail != head) {
-				count += pipe->bufs[tail & mask].len;
-				tail++;
-			}
-			__pipe_unlock(pipe);
+		while (tail != head) {
+			count += pipe->bufs[tail & mask].len;
+			tail++;
+		}
+		__pipe_unlock(pipe);
+
+		return put_user(count, (int __user *)arg);
 
-			return put_user(count, (int __user *)arg);
-		default:
-			return -ENOIOCTLCMD;
+#ifdef CONFIG_WATCH_QUEUE
+	case IOC_WATCH_QUEUE_SET_SIZE: {
+		int ret;
+		__pipe_lock(pipe);
+		ret = watch_queue_set_size(pipe, arg);
+		__pipe_unlock(pipe);
+		return ret;
+	}
+
+	case IOC_WATCH_QUEUE_SET_FILTER:
+		return watch_queue_set_filter(
+			pipe, (struct watch_notification_filter __user *)arg);
+#endif
+
+	default:
+		return -ENOIOCTLCMD;
 	}
 }
 
@@ -754,27 +811,27 @@ pipe_fasync(int fd, struct file *filp, int on)
 	return retval;
 }
 
-static unsigned long account_pipe_buffers(struct user_struct *user,
-                                 unsigned long old, unsigned long new)
+unsigned long account_pipe_buffers(struct user_struct *user,
+				   unsigned long old, unsigned long new)
 {
 	return atomic_long_add_return(new - old, &user->pipe_bufs);
 }
 
-static bool too_many_pipe_buffers_soft(unsigned long user_bufs)
+bool too_many_pipe_buffers_soft(unsigned long user_bufs)
 {
 	unsigned long soft_limit = READ_ONCE(pipe_user_pages_soft);
 
 	return soft_limit && user_bufs > soft_limit;
 }
 
-static bool too_many_pipe_buffers_hard(unsigned long user_bufs)
+bool too_many_pipe_buffers_hard(unsigned long user_bufs)
 {
 	unsigned long hard_limit = READ_ONCE(pipe_user_pages_hard);
 
 	return hard_limit && user_bufs > hard_limit;
 }
 
-static bool is_unprivileged_user(void)
+bool pipe_is_unprivileged_user(void)
 {
 	return !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN);
 }
@@ -796,12 +853,12 @@ struct pipe_inode_info *alloc_pipe_info(void)
 
 	user_bufs = account_pipe_buffers(user, 0, pipe_bufs);
 
-	if (too_many_pipe_buffers_soft(user_bufs) && is_unprivileged_user()) {
+	if (too_many_pipe_buffers_soft(user_bufs) && pipe_is_unprivileged_user()) {
 		user_bufs = account_pipe_buffers(user, pipe_bufs, 1);
 		pipe_bufs = 1;
 	}
 
-	if (too_many_pipe_buffers_hard(user_bufs) && is_unprivileged_user())
+	if (too_many_pipe_buffers_hard(user_bufs) && pipe_is_unprivileged_user())
 		goto out_revert_acct;
 
 	pipe->bufs = kcalloc(pipe_bufs, sizeof(struct pipe_buffer),
@@ -813,6 +870,7 @@ struct pipe_inode_info *alloc_pipe_info(void)
 		pipe->r_counter = pipe->w_counter = 1;
 		pipe->max_usage = pipe_bufs;
 		pipe->ring_size = pipe_bufs;
+		pipe->nr_accounted = pipe_bufs;
 		pipe->user = user;
 		mutex_init(&pipe->mutex);
 		return pipe;
@@ -830,7 +888,14 @@ void free_pipe_info(struct pipe_inode_info *pipe)
 {
 	int i;
 
-	(void) account_pipe_buffers(pipe->user, pipe->ring_size, 0);
+#ifdef CONFIG_WATCH_QUEUE
+	if (pipe->watch_queue) {
+		watch_queue_clear(pipe->watch_queue);
+		put_watch_queue(pipe->watch_queue);
+	}
+#endif
+
+	(void) account_pipe_buffers(pipe->user, pipe->nr_accounted, 0);
 	free_uid(pipe->user);
 	for (i = 0; i < pipe->ring_size; i++) {
 		struct pipe_buffer *buf = pipe->bufs + i;
@@ -906,6 +971,17 @@ int create_pipe_files(struct file **res, int flags)
 	if (!inode)
 		return -ENFILE;
 
+	if (flags & O_NOTIFICATION_PIPE) {
+#ifdef CONFIG_WATCH_QUEUE
+		if (watch_queue_init(inode->i_pipe) < 0) {
+			iput(inode);
+			return -ENOMEM;
+		}
+#else
+		return -ENOPKG;
+#endif
+	}
+
 	f = alloc_file_pseudo(inode, pipe_mnt, "",
 				O_WRONLY | (flags & (O_NONBLOCK | O_DIRECT)),
 				&pipefifo_fops);
@@ -936,7 +1012,7 @@ static int __do_pipe_flags(int *fd, struct file **files, int flags)
 	int error;
 	int fdw, fdr;
 
-	if (flags & ~(O_CLOEXEC | O_NONBLOCK | O_DIRECT))
+	if (flags & ~(O_CLOEXEC | O_NONBLOCK | O_DIRECT | O_NOTIFICATION_PIPE))
 		return -EINVAL;
 
 	error = create_pipe_files(files, flags);
@@ -1184,42 +1260,12 @@ unsigned int round_pipe_size(unsigned long size)
 }
 
 /*
- * Allocate a new array of pipe buffers and copy the info over. Returns the
- * pipe size if successful, or return -ERROR on error.
+ * Resize the pipe ring to a number of slots.
  */
-static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
+int pipe_resize_ring(struct pipe_inode_info *pipe, unsigned int nr_slots)
 {
 	struct pipe_buffer *bufs;
-	unsigned int size, nr_slots, head, tail, mask, n;
-	unsigned long user_bufs;
-	long ret = 0;
-
-	size = round_pipe_size(arg);
-	nr_slots = size >> PAGE_SHIFT;
-
-	if (!nr_slots)
-		return -EINVAL;
-
-	/*
-	 * If trying to increase the pipe capacity, check that an
-	 * unprivileged user is not trying to exceed various limits
-	 * (soft limit check here, hard limit check just below).
-	 * Decreasing the pipe capacity is always permitted, even
-	 * if the user is currently over a limit.
-	 */
-	if (nr_slots > pipe->ring_size &&
-			size > pipe_max_size && !capable(CAP_SYS_RESOURCE))
-		return -EPERM;
-
-	user_bufs = account_pipe_buffers(pipe->user, pipe->ring_size, nr_slots);
-
-	if (nr_slots > pipe->ring_size &&
-			(too_many_pipe_buffers_hard(user_bufs) ||
-			 too_many_pipe_buffers_soft(user_bufs)) &&
-			is_unprivileged_user()) {
-		ret = -EPERM;
-		goto out_revert_acct;
-	}
+	unsigned int head, tail, mask, n;
 
 	/*
 	 * We can shrink the pipe, if arg is greater than the ring occupancy.
@@ -1231,17 +1277,13 @@ static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
 	head = pipe->head;
 	tail = pipe->tail;
 	n = pipe_occupancy(pipe->head, pipe->tail);
-	if (nr_slots < n) {
-		ret = -EBUSY;
-		goto out_revert_acct;
-	}
+	if (nr_slots < n)
+		return -EBUSY;
 
 	bufs = kcalloc(nr_slots, sizeof(*bufs),
 		       GFP_KERNEL_ACCOUNT | __GFP_NOWARN);
-	if (unlikely(!bufs)) {
-		ret = -ENOMEM;
-		goto out_revert_acct;
-	}
+	if (unlikely(!bufs))
+		return -ENOMEM;
 
 	/*
 	 * The pipe array wraps around, so just start the new one at zero
@@ -1269,16 +1311,68 @@ static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
 	kfree(pipe->bufs);
 	pipe->bufs = bufs;
 	pipe->ring_size = nr_slots;
-	pipe->max_usage = nr_slots;
+	if (pipe->max_usage > nr_slots)
+		pipe->max_usage = nr_slots;
 	pipe->tail = tail;
 	pipe->head = head;
 
 	/* This might have made more room for writers */
 	wake_up_interruptible(&pipe->wr_wait);
+	return 0;
+}
+
+/*
+ * Allocate a new array of pipe buffers and copy the info over. Returns the
+ * pipe size if successful, or return -ERROR on error.
+ */
+static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
+{
+	unsigned long user_bufs;
+	unsigned int nr_slots, size;
+	long ret = 0;
+
+#ifdef CONFIG_WATCH_QUEUE
+	if (pipe->watch_queue)
+		return -EBUSY;
+#endif
+
+	size = round_pipe_size(arg);
+	nr_slots = size >> PAGE_SHIFT;
+
+	if (!nr_slots)
+		return -EINVAL;
+
+	/*
+	 * If trying to increase the pipe capacity, check that an
+	 * unprivileged user is not trying to exceed various limits
+	 * (soft limit check here, hard limit check just below).
+	 * Decreasing the pipe capacity is always permitted, even
+	 * if the user is currently over a limit.
+	 */
+	if (nr_slots > pipe->max_usage &&
+			size > pipe_max_size && !capable(CAP_SYS_RESOURCE))
+		return -EPERM;
+
+	user_bufs = account_pipe_buffers(pipe->user, pipe->nr_accounted, nr_slots);
+
+	if (nr_slots > pipe->max_usage &&
+			(too_many_pipe_buffers_hard(user_bufs) ||
+			 too_many_pipe_buffers_soft(user_bufs)) &&
+			pipe_is_unprivileged_user()) {
+		ret = -EPERM;
+		goto out_revert_acct;
+	}
+
+	ret = pipe_resize_ring(pipe, nr_slots);
+	if (ret < 0)
+		goto out_revert_acct;
+
+	pipe->max_usage = nr_slots;
+	pipe->nr_accounted = nr_slots;
 	return pipe->max_usage * PAGE_SIZE;
 
 out_revert_acct:
-	(void) account_pipe_buffers(pipe->user, nr_slots, pipe->ring_size);
+	(void) account_pipe_buffers(pipe->user, nr_slots, pipe->nr_accounted);
 	return ret;
 }
 
@@ -1287,9 +1381,17 @@ static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
  * location, so checking ->i_pipe is not enough to verify that this is a
  * pipe.
  */
-struct pipe_inode_info *get_pipe_info(struct file *file)
+struct pipe_inode_info *get_pipe_info(struct file *file, bool for_splice)
 {
-	return file->f_op == &pipefifo_fops ? file->private_data : NULL;
+	struct pipe_inode_info *pipe = file->private_data;
+
+	if (file->f_op != &pipefifo_fops || !pipe)
+		return NULL;
+#ifdef CONFIG_WATCH_QUEUE
+	if (for_splice && pipe->watch_queue)
+		return NULL;
+#endif
+	return pipe;
 }
 
 long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -1297,7 +1399,7 @@ long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct pipe_inode_info *pipe;
 	long ret;
 
-	pipe = get_pipe_info(file);
+	pipe = get_pipe_info(file, false);
 	if (!pipe)
 		return -EBADF;
 
diff --git a/fs/pnode.c b/fs/pnode.c
index 49f6d7ff2139..1106137c747a 100644
--- a/fs/pnode.c
+++ b/fs/pnode.c
@@ -261,14 +261,13 @@ static int propagate_one(struct mount *m)
 	child = copy_tree(last_source, last_source->mnt.mnt_root, type);
 	if (IS_ERR(child))
 		return PTR_ERR(child);
+	read_seqlock_excl(&mount_lock);
 	mnt_set_mountpoint(m, mp, child);
+	if (m->mnt_master != dest_master)
+		SET_MNT_MARK(m->mnt_master);
+	read_sequnlock_excl(&mount_lock);
 	last_dest = m;
 	last_source = child;
-	if (m->mnt_master != dest_master) {
-		read_seqlock_excl(&mount_lock);
-		SET_MNT_MARK(m->mnt_master);
-		read_sequnlock_excl(&mount_lock);
-	}
 	hlist_add_head(&child->mnt_hash, list);
 	return count_mounts(m->mnt_ns, child);
 }
diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig
index 27ef84d99f59..971a42f6357d 100644
--- a/fs/proc/Kconfig
+++ b/fs/proc/Kconfig
@@ -23,7 +23,7 @@ config PROC_FS
 	  /proc" or the equivalent line in /etc/fstab does the job.
 
 	  The /proc file system is explained in the file
-	  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
+	  <file:Documentation/filesystems/proc.rst> and on the proc(5) manpage
 	  ("man 5 proc").
 
 	  This option will enlarge your kernel by about 67 KB. Several
@@ -95,7 +95,7 @@ config PROC_CHILDREN
 	default n
 	help
 	  Provides a fast way to retrieve first level children pids of a task. See
-	  <file:Documentation/filesystems/proc.txt> for more information.
+	  <file:Documentation/filesystems/proc.rst> for more information.
 
 	  Say Y if you are running any user-space software which takes benefit from
 	  this interface. For example, rkt is such a piece of software.
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 8e16f14bb05a..c4ac25fdb230 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -248,8 +248,8 @@ void render_sigset_t(struct seq_file *m, const char *header,
 	seq_putc(m, '\n');
 }
 
-static void collect_sigign_sigcatch(struct task_struct *p, sigset_t *ign,
-				    sigset_t *catch)
+static void collect_sigign_sigcatch(struct task_struct *p, sigset_t *sigign,
+				    sigset_t *sigcatch)
 {
 	struct k_sigaction *k;
 	int i;
@@ -257,9 +257,9 @@ static void collect_sigign_sigcatch(struct task_struct *p, sigset_t *ign,
 	k = p->sighand->action;
 	for (i = 1; i <= _NSIG; ++i, ++k) {
 		if (k->sa.sa_handler == SIG_IGN)
-			sigaddset(ign, i);
+			sigaddset(sigign, i);
 		else if (k->sa.sa_handler != SIG_DFL)
-			sigaddset(catch, i);
+			sigaddset(sigcatch, i);
 	}
 }
 
diff --git a/fs/proc/base.c b/fs/proc/base.c
index eb2255e95f62..8e5ccd6686fe 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -697,13 +697,21 @@ int proc_setattr(struct dentry *dentry, struct iattr *attr)
  * May current process learn task's sched/cmdline info (for hide_pid_min=1)
  * or euid/egid (for hide_pid_min=2)?
  */
-static bool has_pid_permissions(struct pid_namespace *pid,
+static bool has_pid_permissions(struct proc_fs_info *fs_info,
 				 struct task_struct *task,
-				 int hide_pid_min)
+				 enum proc_hidepid hide_pid_min)
 {
-	if (pid->hide_pid < hide_pid_min)
+	/*
+	 * If 'hidpid' mount option is set force a ptrace check,
+	 * we indicate that we are using a filesystem syscall
+	 * by passing PTRACE_MODE_READ_FSCREDS
+	 */
+	if (fs_info->hide_pid == HIDEPID_NOT_PTRACEABLE)
+		return ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS);
+
+	if (fs_info->hide_pid < hide_pid_min)
 		return true;
-	if (in_group_p(pid->pid_gid))
+	if (in_group_p(fs_info->pid_gid))
 		return true;
 	return ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS);
 }
@@ -711,18 +719,18 @@ static bool has_pid_permissions(struct pid_namespace *pid,
 
 static int proc_pid_permission(struct inode *inode, int mask)
 {
-	struct pid_namespace *pid = proc_pid_ns(inode);
+	struct proc_fs_info *fs_info = proc_sb_info(inode->i_sb);
 	struct task_struct *task;
 	bool has_perms;
 
 	task = get_proc_task(inode);
 	if (!task)
 		return -ESRCH;
-	has_perms = has_pid_permissions(pid, task, HIDEPID_NO_ACCESS);
+	has_perms = has_pid_permissions(fs_info, task, HIDEPID_NO_ACCESS);
 	put_task_struct(task);
 
 	if (!has_perms) {
-		if (pid->hide_pid == HIDEPID_INVISIBLE) {
+		if (fs_info->hide_pid == HIDEPID_INVISIBLE) {
 			/*
 			 * Let's make getdents(), stat(), and open()
 			 * consistent with each other.  If a process
@@ -1909,7 +1917,7 @@ int pid_getattr(const struct path *path, struct kstat *stat,
 		u32 request_mask, unsigned int query_flags)
 {
 	struct inode *inode = d_inode(path->dentry);
-	struct pid_namespace *pid = proc_pid_ns(inode);
+	struct proc_fs_info *fs_info = proc_sb_info(inode->i_sb);
 	struct task_struct *task;
 
 	generic_fillattr(inode, stat);
@@ -1919,7 +1927,7 @@ int pid_getattr(const struct path *path, struct kstat *stat,
 	rcu_read_lock();
 	task = pid_task(proc_pid(inode), PIDTYPE_PID);
 	if (task) {
-		if (!has_pid_permissions(pid, task, HIDEPID_INVISIBLE)) {
+		if (!has_pid_permissions(fs_info, task, HIDEPID_INVISIBLE)) {
 			rcu_read_unlock();
 			/*
 			 * This doesn't prevent learning whether PID exists,
@@ -2770,6 +2778,15 @@ static const struct pid_entry smack_attr_dir_stuff[] = {
 LSM_DIR_OPS(smack);
 #endif
 
+#ifdef CONFIG_SECURITY_APPARMOR
+static const struct pid_entry apparmor_attr_dir_stuff[] = {
+	ATTR("apparmor", "current",	0666),
+	ATTR("apparmor", "prev",	0444),
+	ATTR("apparmor", "exec",	0666),
+};
+LSM_DIR_OPS(apparmor);
+#endif
+
 static const struct pid_entry attr_dir_stuff[] = {
 	ATTR(NULL, "current",		0666),
 	ATTR(NULL, "prev",		0444),
@@ -2781,6 +2798,10 @@ static const struct pid_entry attr_dir_stuff[] = {
 	DIR("smack",			0555,
 	    proc_smack_attr_dir_inode_ops, proc_smack_attr_dir_ops),
 #endif
+#ifdef CONFIG_SECURITY_APPARMOR
+	DIR("apparmor",			0555,
+	    proc_apparmor_attr_dir_inode_ops, proc_apparmor_attr_dir_ops),
+#endif
 };
 
 static int proc_attr_dir_readdir(struct file *file, struct dir_context *ctx)
@@ -3312,6 +3333,7 @@ struct dentry *proc_pid_lookup(struct dentry *dentry, unsigned int flags)
 {
 	struct task_struct *task;
 	unsigned tgid;
+	struct proc_fs_info *fs_info;
 	struct pid_namespace *ns;
 	struct dentry *result = ERR_PTR(-ENOENT);
 
@@ -3319,7 +3341,8 @@ struct dentry *proc_pid_lookup(struct dentry *dentry, unsigned int flags)
 	if (tgid == ~0U)
 		goto out;
 
-	ns = dentry->d_sb->s_fs_info;
+	fs_info = proc_sb_info(dentry->d_sb);
+	ns = fs_info->pid_ns;
 	rcu_read_lock();
 	task = find_task_by_pid_ns(tgid, ns);
 	if (task)
@@ -3328,7 +3351,14 @@ struct dentry *proc_pid_lookup(struct dentry *dentry, unsigned int flags)
 	if (!task)
 		goto out;
 
+	/* Limit procfs to only ptraceable tasks */
+	if (fs_info->hide_pid == HIDEPID_NOT_PTRACEABLE) {
+		if (!has_pid_permissions(fs_info, task, HIDEPID_NO_ACCESS))
+			goto out_put_task;
+	}
+
 	result = proc_pid_instantiate(dentry, task, NULL);
+out_put_task:
 	put_task_struct(task);
 out:
 	return result;
@@ -3354,20 +3384,8 @@ static struct tgid_iter next_tgid(struct pid_namespace *ns, struct tgid_iter ite
 	pid = find_ge_pid(iter.tgid, ns);
 	if (pid) {
 		iter.tgid = pid_nr_ns(pid, ns);
-		iter.task = pid_task(pid, PIDTYPE_PID);
-		/* What we to know is if the pid we have find is the
-		 * pid of a thread_group_leader.  Testing for task
-		 * being a thread_group_leader is the obvious thing
-		 * todo but there is a window when it fails, due to
-		 * the pid transfer logic in de_thread.
-		 *
-		 * So we perform the straight forward test of seeing
-		 * if the pid we have found is the pid of a thread
-		 * group leader, and don't worry if the task we have
-		 * found doesn't happen to be a thread group leader.
-		 * As we don't care in the case of readdir.
-		 */
-		if (!iter.task || !has_group_leader_pid(iter.task)) {
+		iter.task = pid_task(pid, PIDTYPE_TGID);
+		if (!iter.task) {
 			iter.tgid += 1;
 			goto retry;
 		}
@@ -3383,6 +3401,7 @@ static struct tgid_iter next_tgid(struct pid_namespace *ns, struct tgid_iter ite
 int proc_pid_readdir(struct file *file, struct dir_context *ctx)
 {
 	struct tgid_iter iter;
+	struct proc_fs_info *fs_info = proc_sb_info(file_inode(file)->i_sb);
 	struct pid_namespace *ns = proc_pid_ns(file_inode(file));
 	loff_t pos = ctx->pos;
 
@@ -3390,13 +3409,13 @@ int proc_pid_readdir(struct file *file, struct dir_context *ctx)
 		return 0;
 
 	if (pos == TGID_OFFSET - 2) {
-		struct inode *inode = d_inode(ns->proc_self);
+		struct inode *inode = d_inode(fs_info->proc_self);
 		if (!dir_emit(ctx, "self", 4, inode->i_ino, DT_LNK))
 			return 0;
 		ctx->pos = pos = pos + 1;
 	}
 	if (pos == TGID_OFFSET - 1) {
-		struct inode *inode = d_inode(ns->proc_thread_self);
+		struct inode *inode = d_inode(fs_info->proc_thread_self);
 		if (!dir_emit(ctx, "thread-self", 11, inode->i_ino, DT_LNK))
 			return 0;
 		ctx->pos = pos = pos + 1;
@@ -3410,7 +3429,7 @@ int proc_pid_readdir(struct file *file, struct dir_context *ctx)
 		unsigned int len;
 
 		cond_resched();
-		if (!has_pid_permissions(ns, iter.task, HIDEPID_INVISIBLE))
+		if (!has_pid_permissions(fs_info, iter.task, HIDEPID_INVISIBLE))
 			continue;
 
 		len = snprintf(name, sizeof(name), "%u", iter.tgid);
@@ -3610,6 +3629,7 @@ static struct dentry *proc_task_lookup(struct inode *dir, struct dentry * dentry
 	struct task_struct *task;
 	struct task_struct *leader = get_proc_task(dir);
 	unsigned tid;
+	struct proc_fs_info *fs_info;
 	struct pid_namespace *ns;
 	struct dentry *result = ERR_PTR(-ENOENT);
 
@@ -3620,7 +3640,8 @@ static struct dentry *proc_task_lookup(struct inode *dir, struct dentry * dentry
 	if (tid == ~0U)
 		goto out;
 
-	ns = dentry->d_sb->s_fs_info;
+	fs_info = proc_sb_info(dentry->d_sb);
+	ns = fs_info->pid_ns;
 	rcu_read_lock();
 	task = find_task_by_pid_ns(tid, ns);
 	if (task)
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 4ed6dabdf6ff..2f9fa179194d 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -269,6 +269,11 @@ struct dentry *proc_lookup_de(struct inode *dir, struct dentry *dentry,
 struct dentry *proc_lookup(struct inode *dir, struct dentry *dentry,
 		unsigned int flags)
 {
+	struct proc_fs_info *fs_info = proc_sb_info(dir->i_sb);
+
+	if (fs_info->pidonly == PROC_PIDONLY_ON)
+		return ERR_PTR(-ENOENT);
+
 	return proc_lookup_de(dir, dentry, PDE(dir));
 }
 
@@ -325,6 +330,10 @@ int proc_readdir_de(struct file *file, struct dir_context *ctx,
 int proc_readdir(struct file *file, struct dir_context *ctx)
 {
 	struct inode *inode = file_inode(file);
+	struct proc_fs_info *fs_info = proc_sb_info(inode->i_sb);
+
+	if (fs_info->pidonly == PROC_PIDONLY_ON)
+		return 1;
 
 	return proc_readdir_de(file, ctx, PDE(inode));
 }
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index fb4cace9ea41..f40c2532c057 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -24,6 +24,7 @@
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/mount.h>
+#include <linux/bug.h>
 
 #include <linux/uaccess.h>
 
@@ -165,15 +166,28 @@ void proc_invalidate_siblings_dcache(struct hlist_head *inodes, spinlock_t *lock
 		deactivate_super(old_sb);
 }
 
+static inline const char *hidepid2str(enum proc_hidepid v)
+{
+	switch (v) {
+		case HIDEPID_OFF: return "off";
+		case HIDEPID_NO_ACCESS: return "noaccess";
+		case HIDEPID_INVISIBLE: return "invisible";
+		case HIDEPID_NOT_PTRACEABLE: return "ptraceable";
+	}
+	WARN_ONCE(1, "bad hide_pid value: %d\n", v);
+	return "unknown";
+}
+
 static int proc_show_options(struct seq_file *seq, struct dentry *root)
 {
-	struct super_block *sb = root->d_sb;
-	struct pid_namespace *pid = sb->s_fs_info;
+	struct proc_fs_info *fs_info = proc_sb_info(root->d_sb);
 
-	if (!gid_eq(pid->pid_gid, GLOBAL_ROOT_GID))
-		seq_printf(seq, ",gid=%u", from_kgid_munged(&init_user_ns, pid->pid_gid));
-	if (pid->hide_pid != HIDEPID_OFF)
-		seq_printf(seq, ",hidepid=%u", pid->hide_pid);
+	if (!gid_eq(fs_info->pid_gid, GLOBAL_ROOT_GID))
+		seq_printf(seq, ",gid=%u", from_kgid_munged(&init_user_ns, fs_info->pid_gid));
+	if (fs_info->hide_pid != HIDEPID_OFF)
+		seq_printf(seq, ",hidepid=%s", hidepid2str(fs_info->hide_pid));
+	if (fs_info->pidonly != PROC_PIDONLY_OFF)
+		seq_printf(seq, ",subset=pid");
 
 	return 0;
 }
@@ -464,6 +478,7 @@ proc_reg_get_unmapped_area(struct file *file, unsigned long orig_addr,
 
 static int proc_reg_open(struct inode *inode, struct file *file)
 {
+	struct proc_fs_info *fs_info = proc_sb_info(inode->i_sb);
 	struct proc_dir_entry *pde = PDE(inode);
 	int rv = 0;
 	typeof_member(struct proc_ops, proc_open) open;
@@ -477,6 +492,9 @@ static int proc_reg_open(struct inode *inode, struct file *file)
 		return rv;
 	}
 
+	if (fs_info->pidonly == PROC_PIDONLY_ON)
+		return -ENOENT;
+
 	/*
 	 * Ensure that
 	 * 1) PDE's ->release hook will be called no matter what
diff --git a/fs/proc/page.c b/fs/proc/page.c
index f909243d4a66..f3b39a7d2bf3 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -115,7 +115,10 @@ u64 stable_page_flags(struct page *page)
 	 * it differentiates a memory hole from a page with no flags
 	 */
 	if (!page)
-		return 1 << KPF_NOPAGE;
+		return BIT_ULL(KPF_NOPAGE);
+
+	if (pfn_zone_device_reserved(page_to_pfn(page)))
+		return BIT_ULL(KPF_RESERVED);
 
 	k = page->flags;
 	u = 0;
@@ -127,22 +130,22 @@ u64 stable_page_flags(struct page *page)
 	 * simple test in page_mapped() is not enough.
 	 */
 	if (!PageSlab(page) && page_mapped(page))
-		u |= 1 << KPF_MMAP;
+		u |= BIT_ULL(KPF_MMAP);
 	if (PageAnon(page))
-		u |= 1 << KPF_ANON;
+		u |= BIT_ULL(KPF_ANON);
 	if (PageKsm(page))
-		u |= 1 << KPF_KSM;
+		u |= BIT_ULL(KPF_KSM);
 
 	/*
 	 * compound pages: export both head/tail info
 	 * they together define a compound page's start/end pos and order
 	 */
 	if (PageHead(page))
-		u |= 1 << KPF_COMPOUND_HEAD;
+		u |= BIT_ULL(KPF_COMPOUND_HEAD);
 	if (PageTail(page))
-		u |= 1 << KPF_COMPOUND_TAIL;
+		u |= BIT_ULL(KPF_COMPOUND_TAIL);
 	if (PageHuge(page))
-		u |= 1 << KPF_HUGE;
+		u |= BIT_ULL(KPF_HUGE);
 	/*
 	 * PageTransCompound can be true for non-huge compound pages (slab
 	 * pages or pages allocated by drivers with __GFP_COMP) because it
@@ -153,14 +156,13 @@ u64 stable_page_flags(struct page *page)
 		struct page *head = compound_head(page);
 
 		if (PageLRU(head) || PageAnon(head))
-			u |= 1 << KPF_THP;
+			u |= BIT_ULL(KPF_THP);
 		else if (is_huge_zero_page(head)) {
-			u |= 1 << KPF_ZERO_PAGE;
-			u |= 1 << KPF_THP;
+			u |= BIT_ULL(KPF_ZERO_PAGE);
+			u |= BIT_ULL(KPF_THP);
 		}
 	} else if (is_zero_pfn(page_to_pfn(page)))
-		u |= 1 << KPF_ZERO_PAGE;
-
+		u |= BIT_ULL(KPF_ZERO_PAGE);
 
 	/*
 	 * Caveats on high order pages: page->_refcount will only be set
@@ -168,23 +170,23 @@ u64 stable_page_flags(struct page *page)
 	 * SLOB won't set PG_slab at all on compound pages.
 	 */
 	if (PageBuddy(page))
-		u |= 1 << KPF_BUDDY;
+		u |= BIT_ULL(KPF_BUDDY);
 	else if (page_count(page) == 0 && is_free_buddy_page(page))
-		u |= 1 << KPF_BUDDY;
+		u |= BIT_ULL(KPF_BUDDY);
 
 	if (PageOffline(page))
-		u |= 1 << KPF_OFFLINE;
+		u |= BIT_ULL(KPF_OFFLINE);
 	if (PageTable(page))
-		u |= 1 << KPF_PGTABLE;
+		u |= BIT_ULL(KPF_PGTABLE);
 
 	if (page_is_idle(page))
-		u |= 1 << KPF_IDLE;
+		u |= BIT_ULL(KPF_IDLE);
 
 	u |= kpf_copy_bit(k, KPF_LOCKED,	PG_locked);
 
 	u |= kpf_copy_bit(k, KPF_SLAB,		PG_slab);
 	if (PageTail(page) && PageSlab(compound_head(page)))
-		u |= 1 << KPF_SLAB;
+		u |= BIT_ULL(KPF_SLAB);
 
 	u |= kpf_copy_bit(k, KPF_ERROR,		PG_error);
 	u |= kpf_copy_bit(k, KPF_DIRTY,		PG_dirty);
@@ -197,7 +199,7 @@ u64 stable_page_flags(struct page *page)
 	u |= kpf_copy_bit(k, KPF_RECLAIM,	PG_reclaim);
 
 	if (PageSwapCache(page))
-		u |= 1 << KPF_SWAPCACHE;
+		u |= BIT_ULL(KPF_SWAPCACHE);
 	u |= kpf_copy_bit(k, KPF_SWAPBACKED,	PG_swapbacked);
 
 	u |= kpf_copy_bit(k, KPF_UNEVICTABLE,	PG_unevictable);
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index b6f5d459b087..15030784566c 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/bpf-cgroup.h>
+#include <linux/mount.h>
 #include "internal.h"
 
 static const struct dentry_operations proc_sys_dentry_operations;
@@ -539,13 +540,13 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
 	return err;
 }
 
-static ssize_t proc_sys_call_handler(struct file *filp, void __user *buf,
+static ssize_t proc_sys_call_handler(struct file *filp, void __user *ubuf,
 		size_t count, loff_t *ppos, int write)
 {
 	struct inode *inode = file_inode(filp);
 	struct ctl_table_header *head = grab_header(inode);
 	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
-	void *new_buf = NULL;
+	void *kbuf;
 	ssize_t error;
 
 	if (IS_ERR(head))
@@ -564,27 +565,38 @@ static ssize_t proc_sys_call_handler(struct file *filp, void __user *buf,
 	if (!table->proc_handler)
 		goto out;
 
-	error = BPF_CGROUP_RUN_PROG_SYSCTL(head, table, write, buf, &count,
-					   ppos, &new_buf);
+	if (write) {
+		kbuf = memdup_user_nul(ubuf, count);
+		if (IS_ERR(kbuf)) {
+			error = PTR_ERR(kbuf);
+			goto out;
+		}
+	} else {
+		error = -ENOMEM;
+		kbuf = kzalloc(count, GFP_KERNEL);
+		if (!kbuf)
+			goto out;
+	}
+
+	error = BPF_CGROUP_RUN_PROG_SYSCTL(head, table, write, &kbuf, &count,
+					   ppos);
 	if (error)
-		goto out;
+		goto out_free_buf;
 
 	/* careful: calling conventions are nasty here */
-	if (new_buf) {
-		mm_segment_t old_fs;
-
-		old_fs = get_fs();
-		set_fs(KERNEL_DS);
-		error = table->proc_handler(table, write, (void __user *)new_buf,
-					    &count, ppos);
-		set_fs(old_fs);
-		kfree(new_buf);
-	} else {
-		error = table->proc_handler(table, write, buf, &count, ppos);
+	error = table->proc_handler(table, write, kbuf, &count, ppos);
+	if (error)
+		goto out_free_buf;
+
+	if (!write) {
+		error = -EFAULT;
+		if (copy_to_user(ubuf, kbuf, count))
+			goto out_free_buf;
 	}
 
-	if (!error)
-		error = count;
+	error = count;
+out_free_buf:
+	kfree(kbuf);
 out:
 	sysctl_head_finish(head);
 
@@ -1692,3 +1704,144 @@ int __init proc_sys_init(void)
 
 	return sysctl_init();
 }
+
+struct sysctl_alias {
+	const char *kernel_param;
+	const char *sysctl_param;
+};
+
+/*
+ * Historically some settings had both sysctl and a command line parameter.
+ * With the generic sysctl. parameter support, we can handle them at a single
+ * place and only keep the historical name for compatibility. This is not meant
+ * to add brand new aliases. When adding existing aliases, consider whether
+ * the possibly different moment of changing the value (e.g. from early_param
+ * to the moment do_sysctl_args() is called) is an issue for the specific
+ * parameter.
+ */
+static const struct sysctl_alias sysctl_aliases[] = {
+	{"numa_zonelist_order",		"vm.numa_zonelist_order" },
+	{"hung_task_panic",		"kernel.hung_task_panic" },
+	{ }
+};
+
+static const char *sysctl_find_alias(char *param)
+{
+	const struct sysctl_alias *alias;
+
+	for (alias = &sysctl_aliases[0]; alias->kernel_param != NULL; alias++) {
+		if (strcmp(alias->kernel_param, param) == 0)
+			return alias->sysctl_param;
+	}
+
+	return NULL;
+}
+
+/* Set sysctl value passed on kernel command line. */
+static int process_sysctl_arg(char *param, char *val,
+			       const char *unused, void *arg)
+{
+	char *path;
+	struct vfsmount **proc_mnt = arg;
+	struct file_system_type *proc_fs_type;
+	struct file *file;
+	int len;
+	int err;
+	loff_t pos = 0;
+	ssize_t wret;
+
+	if (strncmp(param, "sysctl", sizeof("sysctl") - 1) == 0) {
+		param += sizeof("sysctl") - 1;
+
+		if (param[0] != '/' && param[0] != '.')
+			return 0;
+
+		param++;
+	} else {
+		param = (char *) sysctl_find_alias(param);
+		if (!param)
+			return 0;
+	}
+
+	/*
+	 * To set sysctl options, we use a temporary mount of proc, look up the
+	 * respective sys/ file and write to it. To avoid mounting it when no
+	 * options were given, we mount it only when the first sysctl option is
+	 * found. Why not a persistent mount? There are problems with a
+	 * persistent mount of proc in that it forces userspace not to use any
+	 * proc mount options.
+	 */
+	if (!*proc_mnt) {
+		proc_fs_type = get_fs_type("proc");
+		if (!proc_fs_type) {
+			pr_err("Failed to find procfs to set sysctl from command line\n");
+			return 0;
+		}
+		*proc_mnt = kern_mount(proc_fs_type);
+		put_filesystem(proc_fs_type);
+		if (IS_ERR(*proc_mnt)) {
+			pr_err("Failed to mount procfs to set sysctl from command line\n");
+			return 0;
+		}
+	}
+
+	path = kasprintf(GFP_KERNEL, "sys/%s", param);
+	if (!path)
+		panic("%s: Failed to allocate path for %s\n", __func__, param);
+	strreplace(path, '.', '/');
+
+	file = file_open_root((*proc_mnt)->mnt_root, *proc_mnt, path, O_WRONLY, 0);
+	if (IS_ERR(file)) {
+		err = PTR_ERR(file);
+		if (err == -ENOENT)
+			pr_err("Failed to set sysctl parameter '%s=%s': parameter not found\n",
+				param, val);
+		else if (err == -EACCES)
+			pr_err("Failed to set sysctl parameter '%s=%s': permission denied (read-only?)\n",
+				param, val);
+		else
+			pr_err("Error %pe opening proc file to set sysctl parameter '%s=%s'\n",
+				file, param, val);
+		goto out;
+	}
+	len = strlen(val);
+	wret = kernel_write(file, val, len, &pos);
+	if (wret < 0) {
+		err = wret;
+		if (err == -EINVAL)
+			pr_err("Failed to set sysctl parameter '%s=%s': invalid value\n",
+				param, val);
+		else
+			pr_err("Error %pe writing to proc file to set sysctl parameter '%s=%s'\n",
+				ERR_PTR(err), param, val);
+	} else if (wret != len) {
+		pr_err("Wrote only %zd bytes of %d writing to proc file %s to set sysctl parameter '%s=%s\n",
+			wret, len, path, param, val);
+	}
+
+	err = filp_close(file, NULL);
+	if (err)
+		pr_err("Error %pe closing proc file to set sysctl parameter '%s=%s\n",
+			ERR_PTR(err), param, val);
+out:
+	kfree(path);
+	return 0;
+}
+
+void do_sysctl_args(void)
+{
+	char *command_line;
+	struct vfsmount *proc_mnt = NULL;
+
+	command_line = kstrdup(saved_command_line, GFP_KERNEL);
+	if (!command_line)
+		panic("%s: Failed to allocate copy of command line\n", __func__);
+
+	parse_args("Setting sysctl args", command_line,
+		   NULL, 0, -1, -1, &proc_mnt, process_sysctl_arg);
+
+	if (proc_mnt)
+		kern_unmount(proc_mnt);
+
+	kfree(command_line);
+}
diff --git a/fs/proc/root.c b/fs/proc/root.c
index cdbe9293ea55..ffebed1999e5 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -32,21 +32,86 @@
 struct proc_fs_context {
 	struct pid_namespace	*pid_ns;
 	unsigned int		mask;
-	int			hidepid;
+	enum proc_hidepid	hidepid;
 	int			gid;
+	enum proc_pidonly	pidonly;
 };
 
 enum proc_param {
 	Opt_gid,
 	Opt_hidepid,
+	Opt_subset,
 };
 
 static const struct fs_parameter_spec proc_fs_parameters[] = {
 	fsparam_u32("gid",	Opt_gid),
-	fsparam_u32("hidepid",	Opt_hidepid),
+	fsparam_string("hidepid",	Opt_hidepid),
+	fsparam_string("subset",	Opt_subset),
 	{}
 };
 
+static inline int valid_hidepid(unsigned int value)
+{
+	return (value == HIDEPID_OFF ||
+		value == HIDEPID_NO_ACCESS ||
+		value == HIDEPID_INVISIBLE ||
+		value == HIDEPID_NOT_PTRACEABLE);
+}
+
+static int proc_parse_hidepid_param(struct fs_context *fc, struct fs_parameter *param)
+{
+	struct proc_fs_context *ctx = fc->fs_private;
+	struct fs_parameter_spec hidepid_u32_spec = fsparam_u32("hidepid", Opt_hidepid);
+	struct fs_parse_result result;
+	int base = (unsigned long)hidepid_u32_spec.data;
+
+	if (param->type != fs_value_is_string)
+		return invalf(fc, "proc: unexpected type of hidepid value\n");
+
+	if (!kstrtouint(param->string, base, &result.uint_32)) {
+		if (!valid_hidepid(result.uint_32))
+			return invalf(fc, "proc: unknown value of hidepid - %s\n", param->string);
+		ctx->hidepid = result.uint_32;
+		return 0;
+	}
+
+	if (!strcmp(param->string, "off"))
+		ctx->hidepid = HIDEPID_OFF;
+	else if (!strcmp(param->string, "noaccess"))
+		ctx->hidepid = HIDEPID_NO_ACCESS;
+	else if (!strcmp(param->string, "invisible"))
+		ctx->hidepid = HIDEPID_INVISIBLE;
+	else if (!strcmp(param->string, "ptraceable"))
+		ctx->hidepid = HIDEPID_NOT_PTRACEABLE;
+	else
+		return invalf(fc, "proc: unknown value of hidepid - %s\n", param->string);
+
+	return 0;
+}
+
+static int proc_parse_subset_param(struct fs_context *fc, char *value)
+{
+	struct proc_fs_context *ctx = fc->fs_private;
+
+	while (value) {
+		char *ptr = strchr(value, ',');
+
+		if (ptr != NULL)
+			*ptr++ = '\0';
+
+		if (*value != '\0') {
+			if (!strcmp(value, "pid")) {
+				ctx->pidonly = PROC_PIDONLY_ON;
+			} else {
+				return invalf(fc, "proc: unsupported subset option - %s\n", value);
+			}
+		}
+		value = ptr;
+	}
+
+	return 0;
+}
+
 static int proc_parse_param(struct fs_context *fc, struct fs_parameter *param)
 {
 	struct proc_fs_context *ctx = fc->fs_private;
@@ -63,10 +128,13 @@ static int proc_parse_param(struct fs_context *fc, struct fs_parameter *param)
 		break;
 
 	case Opt_hidepid:
-		ctx->hidepid = result.uint_32;
-		if (ctx->hidepid < HIDEPID_OFF ||
-		    ctx->hidepid > HIDEPID_INVISIBLE)
-			return invalfc(fc, "hidepid value must be between 0 and 2.\n");
+		if (proc_parse_hidepid_param(fc, param))
+			return -EINVAL;
+		break;
+
+	case Opt_subset:
+		if (proc_parse_subset_param(fc, param->string) < 0)
+			return -EINVAL;
 		break;
 
 	default:
@@ -77,26 +145,33 @@ static int proc_parse_param(struct fs_context *fc, struct fs_parameter *param)
 	return 0;
 }
 
-static void proc_apply_options(struct super_block *s,
+static void proc_apply_options(struct proc_fs_info *fs_info,
 			       struct fs_context *fc,
-			       struct pid_namespace *pid_ns,
 			       struct user_namespace *user_ns)
 {
 	struct proc_fs_context *ctx = fc->fs_private;
 
 	if (ctx->mask & (1 << Opt_gid))
-		pid_ns->pid_gid = make_kgid(user_ns, ctx->gid);
+		fs_info->pid_gid = make_kgid(user_ns, ctx->gid);
 	if (ctx->mask & (1 << Opt_hidepid))
-		pid_ns->hide_pid = ctx->hidepid;
+		fs_info->hide_pid = ctx->hidepid;
+	if (ctx->mask & (1 << Opt_subset))
+		fs_info->pidonly = ctx->pidonly;
 }
 
 static int proc_fill_super(struct super_block *s, struct fs_context *fc)
 {
-	struct pid_namespace *pid_ns = get_pid_ns(s->s_fs_info);
+	struct proc_fs_context *ctx = fc->fs_private;
 	struct inode *root_inode;
+	struct proc_fs_info *fs_info;
 	int ret;
 
-	proc_apply_options(s, fc, pid_ns, current_user_ns());
+	fs_info = kzalloc(sizeof(*fs_info), GFP_KERNEL);
+	if (!fs_info)
+		return -ENOMEM;
+
+	fs_info->pid_ns = get_pid_ns(ctx->pid_ns);
+	proc_apply_options(fs_info, fc, current_user_ns());
 
 	/* User space would break if executables or devices appear on proc */
 	s->s_iflags |= SB_I_USERNS_VISIBLE | SB_I_NOEXEC | SB_I_NODEV;
@@ -106,6 +181,7 @@ static int proc_fill_super(struct super_block *s, struct fs_context *fc)
 	s->s_magic = PROC_SUPER_MAGIC;
 	s->s_op = &proc_sops;
 	s->s_time_gran = 1;
+	s->s_fs_info = fs_info;
 
 	/*
 	 * procfs isn't actually a stacking filesystem; however, there is
@@ -113,7 +189,7 @@ static int proc_fill_super(struct super_block *s, struct fs_context *fc)
 	 * top of it
 	 */
 	s->s_stack_depth = FILESYSTEM_MAX_STACK_DEPTH;
-	
+
 	/* procfs dentries and inodes don't require IO to create */
 	s->s_shrink.seeks = 0;
 
@@ -140,19 +216,17 @@ static int proc_fill_super(struct super_block *s, struct fs_context *fc)
 static int proc_reconfigure(struct fs_context *fc)
 {
 	struct super_block *sb = fc->root->d_sb;
-	struct pid_namespace *pid = sb->s_fs_info;
+	struct proc_fs_info *fs_info = proc_sb_info(sb);
 
 	sync_filesystem(sb);
 
-	proc_apply_options(sb, fc, pid, current_user_ns());
+	proc_apply_options(fs_info, fc, current_user_ns());
 	return 0;
 }
 
 static int proc_get_tree(struct fs_context *fc)
 {
-	struct proc_fs_context *ctx = fc->fs_private;
-
-	return get_tree_keyed(fc, proc_fill_super, ctx->pid_ns);
+	return get_tree_nodev(fc, proc_fill_super);
 }
 
 static void proc_fs_context_free(struct fs_context *fc)
@@ -188,22 +262,17 @@ static int proc_init_fs_context(struct fs_context *fc)
 
 static void proc_kill_sb(struct super_block *sb)
 {
-	struct pid_namespace *ns;
+	struct proc_fs_info *fs_info = proc_sb_info(sb);
 
-	ns = (struct pid_namespace *)sb->s_fs_info;
-	if (ns->proc_self)
-		dput(ns->proc_self);
-	if (ns->proc_thread_self)
-		dput(ns->proc_thread_self);
-	kill_anon_super(sb);
+	if (fs_info->proc_self)
+		dput(fs_info->proc_self);
 
-	/* Make the pid namespace safe for the next mount of proc */
-	ns->proc_self = NULL;
-	ns->proc_thread_self = NULL;
-	ns->pid_gid = GLOBAL_ROOT_GID;
-	ns->hide_pid = 0;
+	if (fs_info->proc_thread_self)
+		dput(fs_info->proc_thread_self);
 
-	put_pid_ns(ns);
+	kill_anon_super(sb);
+	put_pid_ns(fs_info->pid_ns);
+	kfree(fs_info);
 }
 
 static struct file_system_type proc_fs_type = {
diff --git a/fs/proc/self.c b/fs/proc/self.c
index 57c0a1047250..309301ac0136 100644
--- a/fs/proc/self.c
+++ b/fs/proc/self.c
@@ -36,10 +36,10 @@ static unsigned self_inum __ro_after_init;
 int proc_setup_self(struct super_block *s)
 {
 	struct inode *root_inode = d_inode(s->s_root);
-	struct pid_namespace *ns = proc_pid_ns(root_inode);
+	struct proc_fs_info *fs_info = proc_sb_info(s);
 	struct dentry *self;
 	int ret = -ENOMEM;
-	
+
 	inode_lock(root_inode);
 	self = d_alloc_name(s->s_root, "self");
 	if (self) {
@@ -62,7 +62,7 @@ int proc_setup_self(struct super_block *s)
 	if (ret)
 		pr_err("proc_fill_super: can't allocate /proc/self\n");
 	else
-		ns->proc_self = self;
+		fs_info->proc_self = self;
 
 	return ret;
 }
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 8d382d4ec067..6ad407d5efe2 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -546,10 +546,17 @@ static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
 	struct mem_size_stats *mss = walk->private;
 	struct vm_area_struct *vma = walk->vma;
 	bool locked = !!(vma->vm_flags & VM_LOCKED);
-	struct page *page;
+	struct page *page = NULL;
 
-	/* FOLL_DUMP will return -EFAULT on huge zero page */
-	page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
+	if (pmd_present(*pmd)) {
+		/* FOLL_DUMP will return -EFAULT on huge zero page */
+		page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
+	} else if (unlikely(thp_migration_supported() && is_swap_pmd(*pmd))) {
+		swp_entry_t entry = pmd_to_swp_entry(*pmd);
+
+		if (is_migration_entry(entry))
+			page = migration_entry_to_page(entry);
+	}
 	if (IS_ERR_OR_NULL(page))
 		return;
 	if (PageAnon(page))
@@ -578,8 +585,7 @@ static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
 
 	ptl = pmd_trans_huge_lock(pmd, vma);
 	if (ptl) {
-		if (pmd_present(*pmd))
-			smaps_pmd_entry(pmd, addr, walk);
+		smaps_pmd_entry(pmd, addr, walk);
 		spin_unlock(ptl);
 		goto out;
 	}
@@ -622,9 +628,6 @@ static void show_smap_vma_flags(struct seq_file *m, struct vm_area_struct *vma)
 		[ilog2(VM_GROWSDOWN)]	= "gd",
 		[ilog2(VM_PFNMAP)]	= "pf",
 		[ilog2(VM_DENYWRITE)]	= "dw",
-#ifdef CONFIG_X86_INTEL_MPX
-		[ilog2(VM_MPX)]		= "mp",
-#endif
 		[ilog2(VM_LOCKED)]	= "lo",
 		[ilog2(VM_IO)]		= "io",
 		[ilog2(VM_SEQ_READ)]	= "sr",
@@ -638,6 +641,9 @@ static void show_smap_vma_flags(struct seq_file *m, struct vm_area_struct *vma)
 		[ilog2(VM_ARCH_1)]	= "ar",
 		[ilog2(VM_WIPEONFORK)]	= "wf",
 		[ilog2(VM_DONTDUMP)]	= "dd",
+#ifdef CONFIG_ARM64_BTI
+		[ilog2(VM_ARM64_BTI)]	= "bt",
+#endif
 #ifdef CONFIG_MEM_SOFT_DIRTY
 		[ilog2(VM_SOFTDIRTY)]	= "sd",
 #endif
diff --git a/fs/proc/thread_self.c b/fs/proc/thread_self.c
index f61ae53533f5..2493cbbdfa6f 100644
--- a/fs/proc/thread_self.c
+++ b/fs/proc/thread_self.c
@@ -36,7 +36,7 @@ static unsigned thread_self_inum __ro_after_init;
 int proc_setup_thread_self(struct super_block *s)
 {
 	struct inode *root_inode = d_inode(s->s_root);
-	struct pid_namespace *ns = proc_pid_ns(root_inode);
+	struct proc_fs_info *fs_info = proc_sb_info(s);
 	struct dentry *thread_self;
 	int ret = -ENOMEM;
 
@@ -60,9 +60,9 @@ int proc_setup_thread_self(struct super_block *s)
 	inode_unlock(root_inode);
 
 	if (ret)
-		pr_err("proc_fill_super: can't allocate /proc/thread_self\n");
+		pr_err("proc_fill_super: can't allocate /proc/thread-self\n");
 	else
-		ns->proc_thread_self = thread_self;
+		fs_info->proc_thread_self = thread_self;
 
 	return ret;
 }
diff --git a/fs/proc_namespace.c b/fs/proc_namespace.c
index 273ee82d8aa9..9a8b624bc3db 100644
--- a/fs/proc_namespace.c
+++ b/fs/proc_namespace.c
@@ -37,23 +37,23 @@ static __poll_t mounts_poll(struct file *file, poll_table *wait)
 	return res;
 }
 
-struct proc_fs_info {
+struct proc_fs_opts {
 	int flag;
 	const char *str;
 };
 
 static int show_sb_opts(struct seq_file *m, struct super_block *sb)
 {
-	static const struct proc_fs_info fs_info[] = {
+	static const struct proc_fs_opts fs_opts[] = {
 		{ SB_SYNCHRONOUS, ",sync" },
 		{ SB_DIRSYNC, ",dirsync" },
 		{ SB_MANDLOCK, ",mand" },
 		{ SB_LAZYTIME, ",lazytime" },
 		{ 0, NULL }
 	};
-	const struct proc_fs_info *fs_infop;
+	const struct proc_fs_opts *fs_infop;
 
-	for (fs_infop = fs_info; fs_infop->flag; fs_infop++) {
+	for (fs_infop = fs_opts; fs_infop->flag; fs_infop++) {
 		if (sb->s_flags & fs_infop->flag)
 			seq_puts(m, fs_infop->str);
 	}
@@ -63,7 +63,7 @@ static int show_sb_opts(struct seq_file *m, struct super_block *sb)
 
 static void show_mnt_opts(struct seq_file *m, struct vfsmount *mnt)
 {
-	static const struct proc_fs_info mnt_info[] = {
+	static const struct proc_fs_opts mnt_opts[] = {
 		{ MNT_NOSUID, ",nosuid" },
 		{ MNT_NODEV, ",nodev" },
 		{ MNT_NOEXEC, ",noexec" },
@@ -72,9 +72,9 @@ static void show_mnt_opts(struct seq_file *m, struct vfsmount *mnt)
 		{ MNT_RELATIME, ",relatime" },
 		{ 0, NULL }
 	};
-	const struct proc_fs_info *fs_infop;
+	const struct proc_fs_opts *fs_infop;
 
-	for (fs_infop = mnt_info; fs_infop->flag; fs_infop++) {
+	for (fs_infop = mnt_opts; fs_infop->flag; fs_infop++) {
 		if (mnt->mnt_flags & fs_infop->flag)
 			seq_puts(m, fs_infop->str);
 	}
diff --git a/fs/qnx6/inode.c b/fs/qnx6/inode.c
index 345db56c98fd..755293c8c71a 100644
--- a/fs/qnx6/inode.c
+++ b/fs/qnx6/inode.c
@@ -99,10 +99,9 @@ static int qnx6_readpage(struct file *file, struct page *page)
 	return mpage_readpage(page, qnx6_get_block);
 }
 
-static int qnx6_readpages(struct file *file, struct address_space *mapping,
-		   struct list_head *pages, unsigned nr_pages)
+static void qnx6_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, qnx6_get_block);
+	mpage_readahead(rac, qnx6_get_block);
 }
 
 /*
@@ -499,7 +498,7 @@ static sector_t qnx6_bmap(struct address_space *mapping, sector_t block)
 }
 static const struct address_space_operations qnx6_aops = {
 	.readpage	= qnx6_readpage,
-	.readpages	= qnx6_readpages,
+	.readahead	= qnx6_readahead,
 	.bmap		= qnx6_bmap
 };
 
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index b6a4f692d345..7b4bac91146b 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2841,7 +2841,7 @@ const struct quotactl_ops dquot_quotactl_sysfile_ops = {
 EXPORT_SYMBOL(dquot_quotactl_sysfile_ops);
 
 static int do_proc_dqstats(struct ctl_table *table, int write,
-		     void __user *buffer, size_t *lenp, loff_t *ppos)
+		     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	unsigned int type = (unsigned long *)table->data - dqstats.stat;
 	s64 value = percpu_counter_sum(&dqstats.counter[type]);
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index ee179a81b3da..55c1dc329bd2 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -147,6 +147,17 @@ static int ramfs_symlink(struct inode * dir, struct dentry *dentry, const char *
 	return error;
 }
 
+static int ramfs_tmpfile(struct inode *dir, struct dentry *dentry, umode_t mode)
+{
+	struct inode *inode;
+
+	inode = ramfs_get_inode(dir->i_sb, dir, mode, 0);
+	if (!inode)
+		return -ENOSPC;
+	d_tmpfile(dentry, inode);
+	return 0;
+}
+
 static const struct inode_operations ramfs_dir_inode_operations = {
 	.create		= ramfs_create,
 	.lookup		= simple_lookup,
@@ -157,6 +168,7 @@ static const struct inode_operations ramfs_dir_inode_operations = {
 	.rmdir		= simple_rmdir,
 	.mknod		= ramfs_mknod,
 	.rename		= simple_rename,
+	.tmpfile	= ramfs_tmpfile,
 };
 
 /*
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 6419e6dacc39..0031070b3692 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1160,11 +1160,9 @@ int reiserfs_get_block(struct inode *inode, sector_t block,
 	return retval;
 }
 
-static int
-reiserfs_readpages(struct file *file, struct address_space *mapping,
-		   struct list_head *pages, unsigned nr_pages)
+static void reiserfs_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, reiserfs_get_block);
+	mpage_readahead(rac, reiserfs_get_block);
 }
 
 /*
@@ -3434,7 +3432,7 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr)
 const struct address_space_operations reiserfs_address_space_operations = {
 	.writepage = reiserfs_writepage,
 	.readpage = reiserfs_readpage,
-	.readpages = reiserfs_readpages,
+	.readahead = reiserfs_readahead,
 	.releasepage = reiserfs_releasepage,
 	.invalidatepage = reiserfs_invalidatepage,
 	.write_begin = reiserfs_write_begin,
diff --git a/fs/romfs/Kconfig b/fs/romfs/Kconfig
index ad4c45788896..9737b8e68878 100644
--- a/fs/romfs/Kconfig
+++ b/fs/romfs/Kconfig
@@ -6,7 +6,7 @@ config ROMFS_FS
 	  This is a very small read-only file system mainly intended for
 	  initial ram disks of installation disks, but it could be used for
 	  other read-only media as well.  Read
-	  <file:Documentation/filesystems/romfs.txt> for details.
+	  <file:Documentation/filesystems/romfs.rst> for details.
 
 	  To compile this file system support as a module, choose M here: the
 	  module will be called romfs.  Note that the file system of your
diff --git a/fs/select.c b/fs/select.c
index 11d0285d46b7..f38a8a7480f7 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -97,7 +97,7 @@ u64 select_estimate_accuracy(struct timespec64 *tv)
 struct poll_table_page {
 	struct poll_table_page * next;
 	struct poll_table_entry * entry;
-	struct poll_table_entry entries[0];
+	struct poll_table_entry entries[];
 };
 
 #define POLL_TABLE_FULL(table) \
@@ -826,7 +826,7 @@ SYSCALL_DEFINE1(old_select, struct sel_arg_struct __user *, arg)
 struct poll_list {
 	struct poll_list *next;
 	int len;
-	struct pollfd entries[0];
+	struct pollfd entries[];
 };
 
 #define POLLFD_PER_PAGE  ((PAGE_SIZE-sizeof(struct poll_list)) / sizeof(struct pollfd))
diff --git a/fs/seq_file.c b/fs/seq_file.c
index 70f5fdf99bf6..4e6239f33c06 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -6,6 +6,8 @@
  * initial implementation -- AV, Oct 2001.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/cache.h>
 #include <linux/fs.h>
 #include <linux/export.h>
@@ -233,9 +235,8 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 
 		p = m->op->next(m, p, &m->index);
 		if (pos == m->index) {
-			pr_info_ratelimited("buggy seq_file .next function %ps "
-				"did not updated position index\n",
-				m->op->next);
+			pr_info_ratelimited("buggy .next function %ps did not update position index\n",
+					    m->op->next);
 			m->index++;
 		}
 		if (!p || IS_ERR(p)) {
diff --git a/fs/splice.c b/fs/splice.c
index 4735defc46ee..86129b5cf7ea 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1118,8 +1118,8 @@ long do_splice(struct file *in, loff_t __user *off_in,
 	loff_t offset;
 	long ret;
 
-	ipipe = get_pipe_info(in);
-	opipe = get_pipe_info(out);
+	ipipe = get_pipe_info(in, true);
+	opipe = get_pipe_info(out, true);
 
 	if (ipipe && opipe) {
 		if (off_in || off_out)
@@ -1278,7 +1278,7 @@ static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 static long vmsplice_to_user(struct file *file, struct iov_iter *iter,
 			     unsigned int flags)
 {
-	struct pipe_inode_info *pipe = get_pipe_info(file);
+	struct pipe_inode_info *pipe = get_pipe_info(file, true);
 	struct splice_desc sd = {
 		.total_len = iov_iter_count(iter),
 		.flags = flags,
@@ -1313,7 +1313,7 @@ static long vmsplice_to_pipe(struct file *file, struct iov_iter *iter,
 	if (flags & SPLICE_F_GIFT)
 		buf_flag = PIPE_BUF_FLAG_GIFT;
 
-	pipe = get_pipe_info(file);
+	pipe = get_pipe_info(file, true);
 	if (!pipe)
 		return -EBADF;
 
@@ -1766,8 +1766,8 @@ static int link_pipe(struct pipe_inode_info *ipipe,
 static long do_tee(struct file *in, struct file *out, size_t len,
 		   unsigned int flags)
 {
-	struct pipe_inode_info *ipipe = get_pipe_info(in);
-	struct pipe_inode_info *opipe = get_pipe_info(out);
+	struct pipe_inode_info *ipipe = get_pipe_info(in, true);
+	struct pipe_inode_info *opipe = get_pipe_info(out, true);
 	int ret = -EINVAL;
 
 	/*
diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c
index 4f9b9fb59362..64f61330564a 100644
--- a/fs/squashfs/block.c
+++ b/fs/squashfs/block.c
@@ -13,6 +13,7 @@
  * datablocks and metadata blocks.
  */
 
+#include <linux/blkdev.h>
 #include <linux/fs.h>
 #include <linux/vfs.h>
 #include <linux/slab.h>
@@ -27,44 +28,103 @@
 #include "page_actor.h"
 
 /*
- * Read the metadata block length, this is stored in the first two
- * bytes of the metadata block.
+ * Returns the amount of bytes copied to the page actor.
  */
-static struct buffer_head *get_block_length(struct super_block *sb,
-			u64 *cur_index, int *offset, int *length)
+static int copy_bio_to_actor(struct bio *bio,
+			     struct squashfs_page_actor *actor,
+			     int offset, int req_length)
+{
+	void *actor_addr = squashfs_first_page(actor);
+	struct bvec_iter_all iter_all = {};
+	struct bio_vec *bvec = bvec_init_iter_all(&iter_all);
+	int copied_bytes = 0;
+	int actor_offset = 0;
+
+	if (WARN_ON_ONCE(!bio_next_segment(bio, &iter_all)))
+		return 0;
+
+	while (copied_bytes < req_length) {
+		int bytes_to_copy = min_t(int, bvec->bv_len - offset,
+					  PAGE_SIZE - actor_offset);
+
+		bytes_to_copy = min_t(int, bytes_to_copy,
+				      req_length - copied_bytes);
+		memcpy(actor_addr + actor_offset,
+		       page_address(bvec->bv_page) + bvec->bv_offset + offset,
+		       bytes_to_copy);
+
+		actor_offset += bytes_to_copy;
+		copied_bytes += bytes_to_copy;
+		offset += bytes_to_copy;
+
+		if (actor_offset >= PAGE_SIZE) {
+			actor_addr = squashfs_next_page(actor);
+			if (!actor_addr)
+				break;
+			actor_offset = 0;
+		}
+		if (offset >= bvec->bv_len) {
+			if (!bio_next_segment(bio, &iter_all))
+				break;
+			offset = 0;
+		}
+	}
+	squashfs_finish_page(actor);
+	return copied_bytes;
+}
+
+static int squashfs_bio_read(struct super_block *sb, u64 index, int length,
+			     struct bio **biop, int *block_offset)
 {
 	struct squashfs_sb_info *msblk = sb->s_fs_info;
-	struct buffer_head *bh;
-
-	bh = sb_bread(sb, *cur_index);
-	if (bh == NULL)
-		return NULL;
-
-	if (msblk->devblksize - *offset == 1) {
-		*length = (unsigned char) bh->b_data[*offset];
-		put_bh(bh);
-		bh = sb_bread(sb, ++(*cur_index));
-		if (bh == NULL)
-			return NULL;
-		*length |= (unsigned char) bh->b_data[0] << 8;
-		*offset = 1;
-	} else {
-		*length = (unsigned char) bh->b_data[*offset] |
-			(unsigned char) bh->b_data[*offset + 1] << 8;
-		*offset += 2;
-
-		if (*offset == msblk->devblksize) {
-			put_bh(bh);
-			bh = sb_bread(sb, ++(*cur_index));
-			if (bh == NULL)
-				return NULL;
-			*offset = 0;
+	const u64 read_start = round_down(index, msblk->devblksize);
+	const sector_t block = read_start >> msblk->devblksize_log2;
+	const u64 read_end = round_up(index + length, msblk->devblksize);
+	const sector_t block_end = read_end >> msblk->devblksize_log2;
+	int offset = read_start - round_down(index, PAGE_SIZE);
+	int total_len = (block_end - block) << msblk->devblksize_log2;
+	const int page_count = DIV_ROUND_UP(total_len + offset, PAGE_SIZE);
+	int error, i;
+	struct bio *bio;
+
+	bio = bio_alloc(GFP_NOIO, page_count);
+	if (!bio)
+		return -ENOMEM;
+
+	bio_set_dev(bio, sb->s_bdev);
+	bio->bi_opf = READ;
+	bio->bi_iter.bi_sector = block * (msblk->devblksize >> SECTOR_SHIFT);
+
+	for (i = 0; i < page_count; ++i) {
+		unsigned int len =
+			min_t(unsigned int, PAGE_SIZE - offset, total_len);
+		struct page *page = alloc_page(GFP_NOIO);
+
+		if (!page) {
+			error = -ENOMEM;
+			goto out_free_bio;
+		}
+		if (!bio_add_page(bio, page, len, offset)) {
+			error = -EIO;
+			goto out_free_bio;
 		}
+		offset = 0;
+		total_len -= len;
 	}
 
-	return bh;
-}
+	error = submit_bio_wait(bio);
+	if (error)
+		goto out_free_bio;
 
+	*biop = bio;
+	*block_offset = index & ((1 << msblk->devblksize_log2) - 1);
+	return 0;
+
+out_free_bio:
+	bio_free_pages(bio);
+	bio_put(bio);
+	return error;
+}
 
 /*
  * Read and decompress a metadata block or datablock.  Length is non-zero
@@ -76,129 +136,88 @@ static struct buffer_head *get_block_length(struct super_block *sb,
  * algorithms).
  */
 int squashfs_read_data(struct super_block *sb, u64 index, int length,
-		u64 *next_index, struct squashfs_page_actor *output)
+		       u64 *next_index, struct squashfs_page_actor *output)
 {
 	struct squashfs_sb_info *msblk = sb->s_fs_info;
-	struct buffer_head **bh;
-	int offset = index & ((1 << msblk->devblksize_log2) - 1);
-	u64 cur_index = index >> msblk->devblksize_log2;
-	int bytes, compressed, b = 0, k = 0, avail, i;
-
-	bh = kcalloc(((output->length + msblk->devblksize - 1)
-		>> msblk->devblksize_log2) + 1, sizeof(*bh), GFP_KERNEL);
-	if (bh == NULL)
-		return -ENOMEM;
+	struct bio *bio = NULL;
+	int compressed;
+	int res;
+	int offset;
 
 	if (length) {
 		/*
 		 * Datablock.
 		 */
-		bytes = -offset;
 		compressed = SQUASHFS_COMPRESSED_BLOCK(length);
 		length = SQUASHFS_COMPRESSED_SIZE_BLOCK(length);
-		if (next_index)
-			*next_index = index + length;
-
 		TRACE("Block @ 0x%llx, %scompressed size %d, src size %d\n",
 			index, compressed ? "" : "un", length, output->length);
-
-		if (length < 0 || length > output->length ||
-				(index + length) > msblk->bytes_used)
-			goto read_failure;
-
-		for (b = 0; bytes < length; b++, cur_index++) {
-			bh[b] = sb_getblk(sb, cur_index);
-			if (bh[b] == NULL)
-				goto block_release;
-			bytes += msblk->devblksize;
-		}
-		ll_rw_block(REQ_OP_READ, 0, b, bh);
 	} else {
 		/*
 		 * Metadata block.
 		 */
-		if ((index + 2) > msblk->bytes_used)
-			goto read_failure;
+		const u8 *data;
+		struct bvec_iter_all iter_all = {};
+		struct bio_vec *bvec = bvec_init_iter_all(&iter_all);
 
-		bh[0] = get_block_length(sb, &cur_index, &offset, &length);
-		if (bh[0] == NULL)
-			goto read_failure;
-		b = 1;
+		if (index + 2 > msblk->bytes_used) {
+			res = -EIO;
+			goto out;
+		}
+		res = squashfs_bio_read(sb, index, 2, &bio, &offset);
+		if (res)
+			goto out;
+
+		if (WARN_ON_ONCE(!bio_next_segment(bio, &iter_all))) {
+			res = -EIO;
+			goto out_free_bio;
+		}
+		/* Extract the length of the metadata block */
+		data = page_address(bvec->bv_page) + bvec->bv_offset;
+		length = data[offset];
+		if (offset <= bvec->bv_len - 1) {
+			length |= data[offset + 1] << 8;
+		} else {
+			if (WARN_ON_ONCE(!bio_next_segment(bio, &iter_all))) {
+				res = -EIO;
+				goto out_free_bio;
+			}
+			data = page_address(bvec->bv_page) + bvec->bv_offset;
+			length |= data[0] << 8;
+		}
+		bio_free_pages(bio);
+		bio_put(bio);
 
-		bytes = msblk->devblksize - offset;
 		compressed = SQUASHFS_COMPRESSED(length);
 		length = SQUASHFS_COMPRESSED_SIZE(length);
-		if (next_index)
-			*next_index = index + length + 2;
+		index += 2;
 
 		TRACE("Block @ 0x%llx, %scompressed size %d\n", index,
-				compressed ? "" : "un", length);
-
-		if (length < 0 || length > output->length ||
-					(index + length) > msblk->bytes_used)
-			goto block_release;
-
-		for (; bytes < length; b++) {
-			bh[b] = sb_getblk(sb, ++cur_index);
-			if (bh[b] == NULL)
-				goto block_release;
-			bytes += msblk->devblksize;
-		}
-		ll_rw_block(REQ_OP_READ, 0, b - 1, bh + 1);
+		      compressed ? "" : "un", length);
 	}
+	if (next_index)
+		*next_index = index + length;
 
-	for (i = 0; i < b; i++) {
-		wait_on_buffer(bh[i]);
-		if (!buffer_uptodate(bh[i]))
-			goto block_release;
-	}
+	res = squashfs_bio_read(sb, index, length, &bio, &offset);
+	if (res)
+		goto out;
 
 	if (compressed) {
-		if (!msblk->stream)
-			goto read_failure;
-		length = squashfs_decompress(msblk, bh, b, offset, length,
-			output);
-		if (length < 0)
-			goto read_failure;
-	} else {
-		/*
-		 * Block is uncompressed.
-		 */
-		int in, pg_offset = 0;
-		void *data = squashfs_first_page(output);
-
-		for (bytes = length; k < b; k++) {
-			in = min(bytes, msblk->devblksize - offset);
-			bytes -= in;
-			while (in) {
-				if (pg_offset == PAGE_SIZE) {
-					data = squashfs_next_page(output);
-					pg_offset = 0;
-				}
-				avail = min_t(int, in, PAGE_SIZE -
-						pg_offset);
-				memcpy(data + pg_offset, bh[k]->b_data + offset,
-						avail);
-				in -= avail;
-				pg_offset += avail;
-				offset += avail;
-			}
-			offset = 0;
-			put_bh(bh[k]);
+		if (!msblk->stream) {
+			res = -EIO;
+			goto out_free_bio;
 		}
-		squashfs_finish_page(output);
+		res = squashfs_decompress(msblk, bio, offset, length, output);
+	} else {
+		res = copy_bio_to_actor(bio, output, offset, length);
 	}
 
-	kfree(bh);
-	return length;
-
-block_release:
-	for (; k < b; k++)
-		put_bh(bh[k]);
+out_free_bio:
+	bio_free_pages(bio);
+	bio_put(bio);
+out:
+	if (res < 0)
+		ERROR("Failed to read block 0x%llx: %d\n", index, res);
 
-read_failure:
-	ERROR("squashfs_read_data failed to read block 0x%llx\n",
-					(unsigned long long) index);
-	kfree(bh);
-	return -EIO;
+	return res;
 }
diff --git a/fs/squashfs/decompressor.h b/fs/squashfs/decompressor.h
index ec8617523e56..1b9ccfd0aa51 100644
--- a/fs/squashfs/decompressor.h
+++ b/fs/squashfs/decompressor.h
@@ -10,13 +10,14 @@
  * decompressor.h
  */
 
+#include <linux/bio.h>
+
 struct squashfs_decompressor {
 	void	*(*init)(struct squashfs_sb_info *, void *);
 	void	*(*comp_opts)(struct squashfs_sb_info *, void *, int);
 	void	(*free)(void *);
 	int	(*decompress)(struct squashfs_sb_info *, void *,
-		struct buffer_head **, int, int, int,
-		struct squashfs_page_actor *);
+		struct bio *, int, int, struct squashfs_page_actor *);
 	int	id;
 	char	*name;
 	int	supported;
diff --git a/fs/squashfs/decompressor_multi.c b/fs/squashfs/decompressor_multi.c
index c181dee235bb..db9f12a3ea05 100644
--- a/fs/squashfs/decompressor_multi.c
+++ b/fs/squashfs/decompressor_multi.c
@@ -6,7 +6,7 @@
 #include <linux/types.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
-#include <linux/buffer_head.h>
+#include <linux/bio.h>
 #include <linux/sched.h>
 #include <linux/wait.h>
 #include <linux/cpumask.h>
@@ -180,14 +180,15 @@ static struct decomp_stream *get_decomp_stream(struct squashfs_sb_info *msblk,
 }
 
 
-int squashfs_decompress(struct squashfs_sb_info *msblk, struct buffer_head **bh,
-	int b, int offset, int length, struct squashfs_page_actor *output)
+int squashfs_decompress(struct squashfs_sb_info *msblk, struct bio *bio,
+			int offset, int length,
+			struct squashfs_page_actor *output)
 {
 	int res;
 	struct squashfs_stream *stream = msblk->stream;
 	struct decomp_stream *decomp_stream = get_decomp_stream(msblk, stream);
 	res = msblk->decompressor->decompress(msblk, decomp_stream->stream,
-		bh, b, offset, length, output);
+		bio, offset, length, output);
 	put_decomp_stream(decomp_stream, stream);
 	if (res < 0)
 		ERROR("%s decompression failed, data probably corrupt\n",
diff --git a/fs/squashfs/decompressor_multi_percpu.c b/fs/squashfs/decompressor_multi_percpu.c
index 2a2a2d106440..d93e12d9b712 100644
--- a/fs/squashfs/decompressor_multi_percpu.c
+++ b/fs/squashfs/decompressor_multi_percpu.c
@@ -72,14 +72,17 @@ void squashfs_decompressor_destroy(struct squashfs_sb_info *msblk)
 	}
 }
 
-int squashfs_decompress(struct squashfs_sb_info *msblk, struct buffer_head **bh,
-	int b, int offset, int length, struct squashfs_page_actor *output)
+int squashfs_decompress(struct squashfs_sb_info *msblk, struct bio *bio,
+	int offset, int length, struct squashfs_page_actor *output)
 {
-	struct squashfs_stream __percpu *percpu =
-			(struct squashfs_stream __percpu *) msblk->stream;
-	struct squashfs_stream *stream = get_cpu_ptr(percpu);
-	int res = msblk->decompressor->decompress(msblk, stream->stream, bh, b,
-		offset, length, output);
+	struct squashfs_stream __percpu *percpu;
+	struct squashfs_stream *stream;
+	int res;
+
+	percpu = (struct squashfs_stream __percpu *)msblk->stream;
+	stream = get_cpu_ptr(percpu);
+	res = msblk->decompressor->decompress(msblk, stream->stream, bio,
+					      offset, length, output);
 	put_cpu_ptr(stream);
 
 	if (res < 0)
diff --git a/fs/squashfs/decompressor_single.c b/fs/squashfs/decompressor_single.c
index 550c3e592032..4eb3d083d45e 100644
--- a/fs/squashfs/decompressor_single.c
+++ b/fs/squashfs/decompressor_single.c
@@ -7,7 +7,7 @@
 #include <linux/types.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
-#include <linux/buffer_head.h>
+#include <linux/bio.h>
 
 #include "squashfs_fs.h"
 #include "squashfs_fs_sb.h"
@@ -59,14 +59,15 @@ void squashfs_decompressor_destroy(struct squashfs_sb_info *msblk)
 	}
 }
 
-int squashfs_decompress(struct squashfs_sb_info *msblk, struct buffer_head **bh,
-	int b, int offset, int length, struct squashfs_page_actor *output)
+int squashfs_decompress(struct squashfs_sb_info *msblk, struct bio *bio,
+			int offset, int length,
+			struct squashfs_page_actor *output)
 {
 	int res;
 	struct squashfs_stream *stream = msblk->stream;
 
 	mutex_lock(&stream->mutex);
-	res = msblk->decompressor->decompress(msblk, stream->stream, bh, b,
+	res = msblk->decompressor->decompress(msblk, stream->stream, bio,
 		offset, length, output);
 	mutex_unlock(&stream->mutex);
 
diff --git a/fs/squashfs/lz4_wrapper.c b/fs/squashfs/lz4_wrapper.c
index c4e47e0588c7..233d5582fbee 100644
--- a/fs/squashfs/lz4_wrapper.c
+++ b/fs/squashfs/lz4_wrapper.c
@@ -4,7 +4,7 @@
  * Phillip Lougher <phillip@squashfs.org.uk>
  */
 
-#include <linux/buffer_head.h>
+#include <linux/bio.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
@@ -89,20 +89,23 @@ static void lz4_free(void *strm)
 
 
 static int lz4_uncompress(struct squashfs_sb_info *msblk, void *strm,
-	struct buffer_head **bh, int b, int offset, int length,
+	struct bio *bio, int offset, int length,
 	struct squashfs_page_actor *output)
 {
+	struct bvec_iter_all iter_all = {};
+	struct bio_vec *bvec = bvec_init_iter_all(&iter_all);
 	struct squashfs_lz4 *stream = strm;
 	void *buff = stream->input, *data;
-	int avail, i, bytes = length, res;
+	int bytes = length, res;
 
-	for (i = 0; i < b; i++) {
-		avail = min(bytes, msblk->devblksize - offset);
-		memcpy(buff, bh[i]->b_data + offset, avail);
+	while (bio_next_segment(bio, &iter_all)) {
+		int avail = min(bytes, ((int)bvec->bv_len) - offset);
+
+		data = page_address(bvec->bv_page) + bvec->bv_offset;
+		memcpy(buff, data + offset, avail);
 		buff += avail;
 		bytes -= avail;
 		offset = 0;
-		put_bh(bh[i]);
 	}
 
 	res = LZ4_decompress_safe(stream->input, stream->output,
diff --git a/fs/squashfs/lzo_wrapper.c b/fs/squashfs/lzo_wrapper.c
index aa3c3dafc33d..97bb7d92ddcd 100644
--- a/fs/squashfs/lzo_wrapper.c
+++ b/fs/squashfs/lzo_wrapper.c
@@ -9,7 +9,7 @@
  */
 
 #include <linux/mutex.h>
-#include <linux/buffer_head.h>
+#include <linux/bio.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/lzo.h>
@@ -63,21 +63,24 @@ static void lzo_free(void *strm)
 
 
 static int lzo_uncompress(struct squashfs_sb_info *msblk, void *strm,
-	struct buffer_head **bh, int b, int offset, int length,
+	struct bio *bio, int offset, int length,
 	struct squashfs_page_actor *output)
 {
+	struct bvec_iter_all iter_all = {};
+	struct bio_vec *bvec = bvec_init_iter_all(&iter_all);
 	struct squashfs_lzo *stream = strm;
 	void *buff = stream->input, *data;
-	int avail, i, bytes = length, res;
+	int bytes = length, res;
 	size_t out_len = output->length;
 
-	for (i = 0; i < b; i++) {
-		avail = min(bytes, msblk->devblksize - offset);
-		memcpy(buff, bh[i]->b_data + offset, avail);
+	while (bio_next_segment(bio, &iter_all)) {
+		int avail = min(bytes, ((int)bvec->bv_len) - offset);
+
+		data = page_address(bvec->bv_page) + bvec->bv_offset;
+		memcpy(buff, data + offset, avail);
 		buff += avail;
 		bytes -= avail;
 		offset = 0;
-		put_bh(bh[i]);
 	}
 
 	res = lzo1x_decompress_safe(stream->input, (size_t)length,
diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h
index 2797763ed046..9783e01c8100 100644
--- a/fs/squashfs/squashfs.h
+++ b/fs/squashfs/squashfs.h
@@ -40,8 +40,8 @@ extern void *squashfs_decompressor_setup(struct super_block *, unsigned short);
 /* decompressor_xxx.c */
 extern void *squashfs_decompressor_create(struct squashfs_sb_info *, void *);
 extern void squashfs_decompressor_destroy(struct squashfs_sb_info *);
-extern int squashfs_decompress(struct squashfs_sb_info *, struct buffer_head **,
-	int, int, int, struct squashfs_page_actor *);
+extern int squashfs_decompress(struct squashfs_sb_info *, struct bio *,
+				int, int, struct squashfs_page_actor *);
 extern int squashfs_max_decompressors(void);
 
 /* export.c */
diff --git a/fs/squashfs/squashfs_fs.h b/fs/squashfs/squashfs_fs.h
index 7187bd1a30ea..8d64edb80ebf 100644
--- a/fs/squashfs/squashfs_fs.h
+++ b/fs/squashfs/squashfs_fs.h
@@ -262,7 +262,7 @@ struct squashfs_dir_index {
 	__le32			index;
 	__le32			start_block;
 	__le32			size;
-	unsigned char		name[0];
+	unsigned char		name[];
 };
 
 struct squashfs_base_inode {
@@ -327,7 +327,7 @@ struct squashfs_symlink_inode {
 	__le32			inode_number;
 	__le32			nlink;
 	__le32			symlink_size;
-	char			symlink[0];
+	char			symlink[];
 };
 
 struct squashfs_reg_inode {
@@ -341,7 +341,7 @@ struct squashfs_reg_inode {
 	__le32			fragment;
 	__le32			offset;
 	__le32			file_size;
-	__le16			block_list[0];
+	__le16			block_list[];
 };
 
 struct squashfs_lreg_inode {
@@ -358,7 +358,7 @@ struct squashfs_lreg_inode {
 	__le32			fragment;
 	__le32			offset;
 	__le32			xattr;
-	__le16			block_list[0];
+	__le16			block_list[];
 };
 
 struct squashfs_dir_inode {
@@ -389,7 +389,7 @@ struct squashfs_ldir_inode {
 	__le16			i_count;
 	__le16			offset;
 	__le32			xattr;
-	struct squashfs_dir_index	index[0];
+	struct squashfs_dir_index	index[];
 };
 
 union squashfs_inode {
@@ -410,7 +410,7 @@ struct squashfs_dir_entry {
 	__le16			inode_number;
 	__le16			type;
 	__le16			size;
-	char			name[0];
+	char			name[];
 };
 
 struct squashfs_dir_header {
@@ -428,12 +428,12 @@ struct squashfs_fragment_entry {
 struct squashfs_xattr_entry {
 	__le16			type;
 	__le16			size;
-	char			data[0];
+	char			data[];
 };
 
 struct squashfs_xattr_val {
 	__le32			vsize;
-	char			value[0];
+	char			value[];
 };
 
 struct squashfs_xattr_id {
diff --git a/fs/squashfs/xz_wrapper.c b/fs/squashfs/xz_wrapper.c
index 4b2f2051a6dc..e80419aed862 100644
--- a/fs/squashfs/xz_wrapper.c
+++ b/fs/squashfs/xz_wrapper.c
@@ -10,7 +10,7 @@
 
 
 #include <linux/mutex.h>
-#include <linux/buffer_head.h>
+#include <linux/bio.h>
 #include <linux/slab.h>
 #include <linux/xz.h>
 #include <linux/bitops.h>
@@ -117,11 +117,12 @@ static void squashfs_xz_free(void *strm)
 
 
 static int squashfs_xz_uncompress(struct squashfs_sb_info *msblk, void *strm,
-	struct buffer_head **bh, int b, int offset, int length,
+	struct bio *bio, int offset, int length,
 	struct squashfs_page_actor *output)
 {
-	enum xz_ret xz_err;
-	int avail, total = 0, k = 0;
+	struct bvec_iter_all iter_all = {};
+	struct bio_vec *bvec = bvec_init_iter_all(&iter_all);
+	int total = 0, error = 0;
 	struct squashfs_xz *stream = strm;
 
 	xz_dec_reset(stream->state);
@@ -131,11 +132,23 @@ static int squashfs_xz_uncompress(struct squashfs_sb_info *msblk, void *strm,
 	stream->buf.out_size = PAGE_SIZE;
 	stream->buf.out = squashfs_first_page(output);
 
-	do {
-		if (stream->buf.in_pos == stream->buf.in_size && k < b) {
-			avail = min(length, msblk->devblksize - offset);
+	for (;;) {
+		enum xz_ret xz_err;
+
+		if (stream->buf.in_pos == stream->buf.in_size) {
+			const void *data;
+			int avail;
+
+			if (!bio_next_segment(bio, &iter_all)) {
+				/* XZ_STREAM_END must be reached. */
+				error = -EIO;
+				break;
+			}
+
+			avail = min(length, ((int)bvec->bv_len) - offset);
+			data = page_address(bvec->bv_page) + bvec->bv_offset;
 			length -= avail;
-			stream->buf.in = bh[k]->b_data + offset;
+			stream->buf.in = data + offset;
 			stream->buf.in_size = avail;
 			stream->buf.in_pos = 0;
 			offset = 0;
@@ -150,23 +163,17 @@ static int squashfs_xz_uncompress(struct squashfs_sb_info *msblk, void *strm,
 		}
 
 		xz_err = xz_dec_run(stream->state, &stream->buf);
-
-		if (stream->buf.in_pos == stream->buf.in_size && k < b)
-			put_bh(bh[k++]);
-	} while (xz_err == XZ_OK);
+		if (xz_err == XZ_STREAM_END)
+			break;
+		if (xz_err != XZ_OK) {
+			error = -EIO;
+			break;
+		}
+	}
 
 	squashfs_finish_page(output);
 
-	if (xz_err != XZ_STREAM_END || k < b)
-		goto out;
-
-	return total + stream->buf.out_pos;
-
-out:
-	for (; k < b; k++)
-		put_bh(bh[k]);
-
-	return -EIO;
+	return error ? error : total + stream->buf.out_pos;
 }
 
 const struct squashfs_decompressor squashfs_xz_comp_ops = {
diff --git a/fs/squashfs/zlib_wrapper.c b/fs/squashfs/zlib_wrapper.c
index f2226afa1625..bcb881ec47f2 100644
--- a/fs/squashfs/zlib_wrapper.c
+++ b/fs/squashfs/zlib_wrapper.c
@@ -10,7 +10,7 @@
 
 
 #include <linux/mutex.h>
-#include <linux/buffer_head.h>
+#include <linux/bio.h>
 #include <linux/slab.h>
 #include <linux/zlib.h>
 #include <linux/vmalloc.h>
@@ -50,21 +50,35 @@ static void zlib_free(void *strm)
 
 
 static int zlib_uncompress(struct squashfs_sb_info *msblk, void *strm,
-	struct buffer_head **bh, int b, int offset, int length,
+	struct bio *bio, int offset, int length,
 	struct squashfs_page_actor *output)
 {
-	int zlib_err, zlib_init = 0, k = 0;
+	struct bvec_iter_all iter_all = {};
+	struct bio_vec *bvec = bvec_init_iter_all(&iter_all);
+	int zlib_init = 0, error = 0;
 	z_stream *stream = strm;
 
 	stream->avail_out = PAGE_SIZE;
 	stream->next_out = squashfs_first_page(output);
 	stream->avail_in = 0;
 
-	do {
-		if (stream->avail_in == 0 && k < b) {
-			int avail = min(length, msblk->devblksize - offset);
+	for (;;) {
+		int zlib_err;
+
+		if (stream->avail_in == 0) {
+			const void *data;
+			int avail;
+
+			if (!bio_next_segment(bio, &iter_all)) {
+				/* Z_STREAM_END must be reached. */
+				error = -EIO;
+				break;
+			}
+
+			avail = min(length, ((int)bvec->bv_len) - offset);
+			data = page_address(bvec->bv_page) + bvec->bv_offset;
 			length -= avail;
-			stream->next_in = bh[k]->b_data + offset;
+			stream->next_in = data + offset;
 			stream->avail_in = avail;
 			offset = 0;
 		}
@@ -78,37 +92,28 @@ static int zlib_uncompress(struct squashfs_sb_info *msblk, void *strm,
 		if (!zlib_init) {
 			zlib_err = zlib_inflateInit(stream);
 			if (zlib_err != Z_OK) {
-				squashfs_finish_page(output);
-				goto out;
+				error = -EIO;
+				break;
 			}
 			zlib_init = 1;
 		}
 
 		zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
-
-		if (stream->avail_in == 0 && k < b)
-			put_bh(bh[k++]);
-	} while (zlib_err == Z_OK);
+		if (zlib_err == Z_STREAM_END)
+			break;
+		if (zlib_err != Z_OK) {
+			error = -EIO;
+			break;
+		}
+	}
 
 	squashfs_finish_page(output);
 
-	if (zlib_err != Z_STREAM_END)
-		goto out;
-
-	zlib_err = zlib_inflateEnd(stream);
-	if (zlib_err != Z_OK)
-		goto out;
-
-	if (k < b)
-		goto out;
-
-	return stream->total_out;
-
-out:
-	for (; k < b; k++)
-		put_bh(bh[k]);
+	if (!error)
+		if (zlib_inflateEnd(stream) != Z_OK)
+			error = -EIO;
 
-	return -EIO;
+	return error ? error : stream->total_out;
 }
 
 const struct squashfs_decompressor squashfs_zlib_comp_ops = {
diff --git a/fs/squashfs/zstd_wrapper.c b/fs/squashfs/zstd_wrapper.c
index b448c2a1d0ed..b7cb1faa652d 100644
--- a/fs/squashfs/zstd_wrapper.c
+++ b/fs/squashfs/zstd_wrapper.c
@@ -9,7 +9,7 @@
  */
 
 #include <linux/mutex.h>
-#include <linux/buffer_head.h>
+#include <linux/bio.h>
 #include <linux/slab.h>
 #include <linux/zstd.h>
 #include <linux/vmalloc.h>
@@ -59,33 +59,44 @@ static void zstd_free(void *strm)
 
 
 static int zstd_uncompress(struct squashfs_sb_info *msblk, void *strm,
-	struct buffer_head **bh, int b, int offset, int length,
+	struct bio *bio, int offset, int length,
 	struct squashfs_page_actor *output)
 {
 	struct workspace *wksp = strm;
 	ZSTD_DStream *stream;
 	size_t total_out = 0;
-	size_t zstd_err;
-	int k = 0;
+	int error = 0;
 	ZSTD_inBuffer in_buf = { NULL, 0, 0 };
 	ZSTD_outBuffer out_buf = { NULL, 0, 0 };
+	struct bvec_iter_all iter_all = {};
+	struct bio_vec *bvec = bvec_init_iter_all(&iter_all);
 
 	stream = ZSTD_initDStream(wksp->window_size, wksp->mem, wksp->mem_size);
 
 	if (!stream) {
 		ERROR("Failed to initialize zstd decompressor\n");
-		goto out;
+		return -EIO;
 	}
 
 	out_buf.size = PAGE_SIZE;
 	out_buf.dst = squashfs_first_page(output);
 
-	do {
-		if (in_buf.pos == in_buf.size && k < b) {
-			int avail = min(length, msblk->devblksize - offset);
+	for (;;) {
+		size_t zstd_err;
 
+		if (in_buf.pos == in_buf.size) {
+			const void *data;
+			int avail;
+
+			if (!bio_next_segment(bio, &iter_all)) {
+				error = -EIO;
+				break;
+			}
+
+			avail = min(length, ((int)bvec->bv_len) - offset);
+			data = page_address(bvec->bv_page) + bvec->bv_offset;
 			length -= avail;
-			in_buf.src = bh[k]->b_data + offset;
+			in_buf.src = data + offset;
 			in_buf.size = avail;
 			in_buf.pos = 0;
 			offset = 0;
@@ -97,8 +108,8 @@ static int zstd_uncompress(struct squashfs_sb_info *msblk, void *strm,
 				/* Shouldn't run out of pages
 				 * before stream is done.
 				 */
-				squashfs_finish_page(output);
-				goto out;
+				error = -EIO;
+				break;
 			}
 			out_buf.pos = 0;
 			out_buf.size = PAGE_SIZE;
@@ -107,29 +118,20 @@ static int zstd_uncompress(struct squashfs_sb_info *msblk, void *strm,
 		total_out -= out_buf.pos;
 		zstd_err = ZSTD_decompressStream(stream, &out_buf, &in_buf);
 		total_out += out_buf.pos; /* add the additional data produced */
-
-		if (in_buf.pos == in_buf.size && k < b)
-			put_bh(bh[k++]);
-	} while (zstd_err != 0 && !ZSTD_isError(zstd_err));
-
-	squashfs_finish_page(output);
-
-	if (ZSTD_isError(zstd_err)) {
-		ERROR("zstd decompression error: %d\n",
-				(int)ZSTD_getErrorCode(zstd_err));
-		goto out;
+		if (zstd_err == 0)
+			break;
+
+		if (ZSTD_isError(zstd_err)) {
+			ERROR("zstd decompression error: %d\n",
+					(int)ZSTD_getErrorCode(zstd_err));
+			error = -EIO;
+			break;
+		}
 	}
 
-	if (k < b)
-		goto out;
-
-	return (int)total_out;
-
-out:
-	for (; k < b; k++)
-		put_bh(bh[k]);
+	squashfs_finish_page(output);
 
-	return -EIO;
+	return error ? error : total_out;
 }
 
 const struct squashfs_decompressor squashfs_zstd_comp_ops = {
diff --git a/fs/super.c b/fs/super.c
index cd352530eca9..3ff3af317c31 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -361,7 +361,7 @@ EXPORT_SYMBOL(deactivate_locked_super);
  */
 void deactivate_super(struct super_block *s)
 {
-        if (!atomic_add_unless(&s->s_active, -1, 1)) {
+	if (!atomic_add_unless(&s->s_active, -1, 1)) {
 		down_write(&s->s_umount);
 		deactivate_locked_super(s);
 	}
@@ -1302,8 +1302,8 @@ int get_tree_bdev(struct fs_context *fc,
 	mutex_lock(&bdev->bd_fsfreeze_mutex);
 	if (bdev->bd_fsfreeze_count > 0) {
 		mutex_unlock(&bdev->bd_fsfreeze_mutex);
-		blkdev_put(bdev, mode);
 		warnf(fc, "%pg: Can't mount, blockdev is frozen", bdev);
+		blkdev_put(bdev, mode);
 		return -EBUSY;
 	}
 
diff --git a/fs/sync.c b/fs/sync.c
index 4d1ff010bc5a..1373a610dc78 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -76,7 +76,8 @@ static void sync_inodes_one_sb(struct super_block *sb, void *arg)
 
 static void sync_fs_one_sb(struct super_block *sb, void *arg)
 {
-	if (!sb_rdonly(sb) && sb->s_op->sync_fs)
+	if (!sb_rdonly(sb) && !(sb->s_iflags & SB_I_SKIP_SYNC) &&
+	    sb->s_op->sync_fs)
 		sb->s_op->sync_fs(sb, *(int *)arg);
 }
 
@@ -161,7 +162,7 @@ SYSCALL_DEFINE1(syncfs, int, fd)
 {
 	struct fd f = fdget(fd);
 	struct super_block *sb;
-	int ret;
+	int ret, ret2;
 
 	if (!f.file)
 		return -EBADF;
@@ -171,8 +172,10 @@ SYSCALL_DEFINE1(syncfs, int, fd)
 	ret = sync_filesystem(sb);
 	up_read(&sb->s_umount);
 
+	ret2 = errseq_check_and_advance(&sb->s_wb_err, &f.file->f_sb_err);
+
 	fdput(f);
-	return ret;
+	return ret ? ret : ret2;
 }
 
 /**
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index aa85f2874a9f..59dffd5ca517 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2007 SUSE Linux Products GmbH
  * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
  *
- * Please see Documentation/filesystems/sysfs.txt for more information.
+ * Please see Documentation/filesystems/sysfs.rst for more information.
  */
 
 #define pr_fmt(fmt)	"sysfs: " fmt
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 26bbf960e2a2..f275fcda62fb 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2007 SUSE Linux Products GmbH
  * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
  *
- * Please see Documentation/filesystems/sysfs.txt for more information.
+ * Please see Documentation/filesystems/sysfs.rst for more information.
  */
 
 #include <linux/module.h>
diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index db81cfbab9d6..e747c135c1d1 100644
--- a/fs/sysfs/mount.c
+++ b/fs/sysfs/mount.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2007 SUSE Linux Products GmbH
  * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
  *
- * Please see Documentation/filesystems/sysfs.txt for more information.
+ * Please see Documentation/filesystems/sysfs.rst for more information.
  */
 
 #include <linux/fs.h>
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index c4deecc80f67..5603530a1a52 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2007 SUSE Linux Products GmbH
  * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
  *
- * Please see Documentation/filesystems/sysfs.txt for more information.
+ * Please see Documentation/filesystems/sysfs.rst for more information.
  */
 
 #include <linux/fs.h>
diff --git a/fs/sysv/Kconfig b/fs/sysv/Kconfig
index d4edf7d9ae10..b4e23e03fbeb 100644
--- a/fs/sysv/Kconfig
+++ b/fs/sysv/Kconfig
@@ -28,7 +28,7 @@ config SYSV_FS
 	  tar" or preferably "info tar").  Note also that this option has
 	  nothing whatsoever to do with the option "System V IPC". Read about
 	  the System V file system in
-	  <file:Documentation/filesystems/sysv-fs.txt>.
+	  <file:Documentation/filesystems/sysv-fs.rst>.
 	  Saying Y here will enlarge your kernel by about 27 KB.
 
 	  To compile this as a module, choose M here: the module will be called
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index 0f5a480fe264..31288d8fa2ce 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -815,7 +815,7 @@ void ubifs_dump_leb(const struct ubifs_info *c, int lnum)
 
 	pr_err("(pid %d) start dumping LEB %d\n", current->pid, lnum);
 
-	buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	buf = __vmalloc(c->leb_size, GFP_NOFS);
 	if (!buf) {
 		ubifs_err(c, "cannot allocate memory for dumping LEB %d", lnum);
 		return;
diff --git a/fs/ubifs/lprops.c b/fs/ubifs/lprops.c
index 29826c51883a..22bfda158f7f 100644
--- a/fs/ubifs/lprops.c
+++ b/fs/ubifs/lprops.c
@@ -1095,7 +1095,7 @@ static int scan_check_cb(struct ubifs_info *c,
 		return LPT_SCAN_CONTINUE;
 	}
 
-	buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	buf = __vmalloc(c->leb_size, GFP_NOFS);
 	if (!buf)
 		return -ENOMEM;
 
diff --git a/fs/ubifs/lpt_commit.c b/fs/ubifs/lpt_commit.c
index ff5e0411cf2d..d76a19e460cd 100644
--- a/fs/ubifs/lpt_commit.c
+++ b/fs/ubifs/lpt_commit.c
@@ -1596,7 +1596,7 @@ static int dbg_check_ltab_lnum(struct ubifs_info *c, int lnum)
 	if (!dbg_is_chk_lprops(c))
 		return 0;
 
-	buf = p = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	buf = p = __vmalloc(c->leb_size, GFP_NOFS);
 	if (!buf) {
 		ubifs_err(c, "cannot allocate memory for ltab checking");
 		return 0;
@@ -1845,7 +1845,7 @@ static void dump_lpt_leb(const struct ubifs_info *c, int lnum)
 	void *buf, *p;
 
 	pr_err("(pid %d) start dumping LEB %d\n", current->pid, lnum);
-	buf = p = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	buf = p = __vmalloc(c->leb_size, GFP_NOFS);
 	if (!buf) {
 		ubifs_err(c, "cannot allocate memory to dump LPT");
 		return;
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index 283f9eb48410..2c294085ffed 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -977,7 +977,7 @@ static int dbg_scan_orphans(struct ubifs_info *c, struct check_info *ci)
 	if (c->no_orphs)
 		return 0;
 
-	buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	buf = __vmalloc(c->leb_size, GFP_NOFS);
 	if (!buf) {
 		ubifs_err(c, "cannot allocate memory to check orphans");
 		return 0;
diff --git a/fs/udf/Kconfig b/fs/udf/Kconfig
index 6848de581ce1..26e1a49f3ba7 100644
--- a/fs/udf/Kconfig
+++ b/fs/udf/Kconfig
@@ -9,7 +9,7 @@ config UDF_FS
 	  compatible with standard unix file systems, it is also suitable for
 	  removable USB disks. Say Y if you intend to mount DVD discs or CDRW's
 	  written in packet mode, or if you want to use UDF for removable USB
-	  disks. Please read <file:Documentation/filesystems/udf.txt>.
+	  disks. Please read <file:Documentation/filesystems/udf.rst>.
 
 	  To compile this file system support as a module, choose M here: the
 	  module will be called udf.
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index e875bc5668ee..adaba8e8b326 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -195,10 +195,9 @@ static int udf_readpage(struct file *file, struct page *page)
 	return mpage_readpage(page, udf_get_block);
 }
 
-static int udf_readpages(struct file *file, struct address_space *mapping,
-			struct list_head *pages, unsigned nr_pages)
+static void udf_readahead(struct readahead_control *rac)
 {
-	return mpage_readpages(mapping, pages, nr_pages, udf_get_block);
+	mpage_readahead(rac, udf_get_block);
 }
 
 static int udf_write_begin(struct file *file, struct address_space *mapping,
@@ -234,7 +233,7 @@ static sector_t udf_bmap(struct address_space *mapping, sector_t block)
 
 const struct address_space_operations udf_aops = {
 	.readpage	= udf_readpage,
-	.readpages	= udf_readpages,
+	.readahead	= udf_readahead,
 	.writepage	= udf_writepage,
 	.writepages	= udf_writepages,
 	.write_begin	= udf_write_begin,
diff --git a/fs/xattr.c b/fs/xattr.c
index e13265e65871..91608d9bfc6a 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -876,6 +876,9 @@ int simple_xattr_set(struct simple_xattrs *xattrs, const char *name,
 	struct simple_xattr *new_xattr = NULL;
 	int err = 0;
 
+	if (removed_size)
+		*removed_size = -1;
+
 	/* value == NULL means remove */
 	if (value) {
 		new_xattr = simple_xattr_alloc(value, size);
@@ -914,9 +917,6 @@ int simple_xattr_set(struct simple_xattrs *xattrs, const char *name,
 		list_add(&new_xattr->list, &xattrs->head);
 		xattr = NULL;
 	}
-
-	if (removed_size)
-		*removed_size = -1;
 out:
 	spin_unlock(&xattrs->lock);
 	if (xattr) {
diff --git a/fs/xfs/kmem.c b/fs/xfs/kmem.c
index 1da94237a8cf..f1366475c389 100644
--- a/fs/xfs/kmem.c
+++ b/fs/xfs/kmem.c
@@ -48,7 +48,7 @@ __kmem_vmalloc(size_t size, xfs_km_flags_t flags)
 	if (flags & KM_NOFS)
 		nofs_flag = memalloc_nofs_save();
 
-	ptr = __vmalloc(size, lflags, PAGE_KERNEL);
+	ptr = __vmalloc(size, lflags);
 
 	if (flags & KM_NOFS)
 		memalloc_nofs_restore(nofs_flag);
diff --git a/fs/xfs/libxfs/xfs_format.h b/fs/xfs/libxfs/xfs_format.h
index 045556e78ee2..592f1c12ad36 100644
--- a/fs/xfs/libxfs/xfs_format.h
+++ b/fs/xfs/libxfs/xfs_format.h
@@ -1681,7 +1681,7 @@ struct xfs_acl_entry {
 
 struct xfs_acl {
 	__be32			acl_cnt;
-	struct xfs_acl_entry	acl_entry[0];
+	struct xfs_acl_entry	acl_entry[];
 };
 
 /*
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 9d9cebf18726..1fd4fb7a607c 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -621,14 +621,11 @@ xfs_vm_readpage(
 	return iomap_readpage(page, &xfs_read_iomap_ops);
 }
 
-STATIC int
-xfs_vm_readpages(
-	struct file		*unused,
-	struct address_space	*mapping,
-	struct list_head	*pages,
-	unsigned		nr_pages)
+STATIC void
+xfs_vm_readahead(
+	struct readahead_control	*rac)
 {
-	return iomap_readpages(mapping, pages, nr_pages, &xfs_read_iomap_ops);
+	iomap_readahead(rac, &xfs_read_iomap_ops);
 }
 
 static int
@@ -644,7 +641,7 @@ xfs_iomap_swapfile_activate(
 
 const struct address_space_operations xfs_address_space_operations = {
 	.readpage		= xfs_vm_readpage,
-	.readpages		= xfs_vm_readpages,
+	.readahead		= xfs_vm_readahead,
 	.writepage		= xfs_vm_writepage,
 	.writepages		= xfs_vm_writepages,
 	.set_page_dirty		= iomap_set_page_dirty,
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 9ec3eaf1c618..65538d18e64f 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -477,7 +477,7 @@ _xfs_buf_map_pages(
 		nofs_flag = memalloc_nofs_save();
 		do {
 			bp->b_addr = vm_map_ram(bp->b_pages, bp->b_page_count,
-						-1, PAGE_KERNEL);
+						-1);
 			if (bp->b_addr)
 				break;
 			vm_unmap_aliases();
diff --git a/fs/xfs/xfs_sysctl.c b/fs/xfs/xfs_sysctl.c
index 31b3bdbd2eba..021ef96d0542 100644
--- a/fs/xfs/xfs_sysctl.c
+++ b/fs/xfs/xfs_sysctl.c
@@ -13,7 +13,7 @@ STATIC int
 xfs_stats_clear_proc_handler(
 	struct ctl_table	*ctl,
 	int			write,
-	void			__user *buffer,
+	void			*buffer,
 	size_t			*lenp,
 	loff_t			*ppos)
 {
@@ -33,7 +33,7 @@ STATIC int
 xfs_panic_mask_proc_handler(
 	struct ctl_table	*ctl,
 	int			write,
-	void			__user *buffer,
+	void			*buffer,
 	size_t			*lenp,
 	loff_t			*ppos)
 {
diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c
index 3ce9829a6936..dba874a61fc5 100644
--- a/fs/zonefs/super.c
+++ b/fs/zonefs/super.c
@@ -78,10 +78,9 @@ static int zonefs_readpage(struct file *unused, struct page *page)
 	return iomap_readpage(page, &zonefs_iomap_ops);
 }
 
-static int zonefs_readpages(struct file *unused, struct address_space *mapping,
-			    struct list_head *pages, unsigned int nr_pages)
+static void zonefs_readahead(struct readahead_control *rac)
 {
-	return iomap_readpages(mapping, pages, nr_pages, &zonefs_iomap_ops);
+	iomap_readahead(rac, &zonefs_iomap_ops);
 }
 
 /*
@@ -128,7 +127,7 @@ static int zonefs_writepages(struct address_space *mapping,
 
 static const struct address_space_operations zonefs_file_aops = {
 	.readpage		= zonefs_readpage,
-	.readpages		= zonefs_readpages,
+	.readahead		= zonefs_readahead,
 	.writepage		= zonefs_writepage,
 	.writepages		= zonefs_writepages,
 	.set_page_dirty		= iomap_set_page_dirty,
diff --git a/include/asm-generic/5level-fixup.h b/include/asm-generic/5level-fixup.h
deleted file mode 100644
index 4c74b1c1d13b..000000000000
--- a/include/asm-generic/5level-fixup.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _5LEVEL_FIXUP_H
-#define _5LEVEL_FIXUP_H
-
-#define __ARCH_HAS_5LEVEL_HACK
-#define __PAGETABLE_P4D_FOLDED 1
-
-#define P4D_SHIFT			PGDIR_SHIFT
-#define P4D_SIZE			PGDIR_SIZE
-#define P4D_MASK			PGDIR_MASK
-#define MAX_PTRS_PER_P4D		1
-#define PTRS_PER_P4D			1
-
-#define p4d_t				pgd_t
-
-#define pud_alloc(mm, p4d, address) \
-	((unlikely(pgd_none(*(p4d))) && __pud_alloc(mm, p4d, address)) ? \
-		NULL : pud_offset(p4d, address))
-
-#define p4d_alloc(mm, pgd, address)	(pgd)
-#define p4d_offset(pgd, start)		(pgd)
-
-#ifndef __ASSEMBLY__
-static inline int p4d_none(p4d_t p4d)
-{
-	return 0;
-}
-
-static inline int p4d_bad(p4d_t p4d)
-{
-	return 0;
-}
-
-static inline int p4d_present(p4d_t p4d)
-{
-	return 1;
-}
-#endif
-
-#define p4d_ERROR(p4d)			do { } while (0)
-#define p4d_clear(p4d)			pgd_clear(p4d)
-#define p4d_val(p4d)			pgd_val(p4d)
-#define p4d_populate(mm, p4d, pud)	pgd_populate(mm, p4d, pud)
-#define p4d_populate_safe(mm, p4d, pud)	pgd_populate(mm, p4d, pud)
-#define p4d_page(p4d)			pgd_page(p4d)
-#define p4d_page_vaddr(p4d)		pgd_page_vaddr(p4d)
-
-#define __p4d(x)			__pgd(x)
-#define set_p4d(p4dp, p4d)		set_pgd(p4dp, p4d)
-
-#undef p4d_free_tlb
-#define p4d_free_tlb(tlb, x, addr)	do { } while (0)
-#define p4d_free(mm, x)			do { } while (0)
-
-#undef  p4d_addr_end
-#define p4d_addr_end(addr, end)		(end)
-
-#endif
diff --git a/include/asm-generic/atomic-instrumented.h b/include/asm-generic/atomic-instrumented.h
index e8730c6b9fe2..379986e40159 100644
--- a/include/asm-generic/atomic-instrumented.h
+++ b/include/asm-generic/atomic-instrumented.h
@@ -18,1623 +18,1624 @@
 #define _ASM_GENERIC_ATOMIC_INSTRUMENTED_H
 
 #include <linux/build_bug.h>
-#include <linux/kasan-checks.h>
+#include <linux/compiler.h>
+#include <linux/instrumented.h>
 
-static inline int
+static __always_inline int
 atomic_read(const atomic_t *v)
 {
-	kasan_check_read(v, sizeof(*v));
+	instrument_atomic_read(v, sizeof(*v));
 	return arch_atomic_read(v);
 }
 #define atomic_read atomic_read
 
 #if defined(arch_atomic_read_acquire)
-static inline int
+static __always_inline int
 atomic_read_acquire(const atomic_t *v)
 {
-	kasan_check_read(v, sizeof(*v));
+	instrument_atomic_read(v, sizeof(*v));
 	return arch_atomic_read_acquire(v);
 }
 #define atomic_read_acquire atomic_read_acquire
 #endif
 
-static inline void
+static __always_inline void
 atomic_set(atomic_t *v, int i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_set(v, i);
 }
 #define atomic_set atomic_set
 
 #if defined(arch_atomic_set_release)
-static inline void
+static __always_inline void
 atomic_set_release(atomic_t *v, int i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_set_release(v, i);
 }
 #define atomic_set_release atomic_set_release
 #endif
 
-static inline void
+static __always_inline void
 atomic_add(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_add(i, v);
 }
 #define atomic_add atomic_add
 
 #if !defined(arch_atomic_add_return_relaxed) || defined(arch_atomic_add_return)
-static inline int
+static __always_inline int
 atomic_add_return(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_add_return(i, v);
 }
 #define atomic_add_return atomic_add_return
 #endif
 
 #if defined(arch_atomic_add_return_acquire)
-static inline int
+static __always_inline int
 atomic_add_return_acquire(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_add_return_acquire(i, v);
 }
 #define atomic_add_return_acquire atomic_add_return_acquire
 #endif
 
 #if defined(arch_atomic_add_return_release)
-static inline int
+static __always_inline int
 atomic_add_return_release(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_add_return_release(i, v);
 }
 #define atomic_add_return_release atomic_add_return_release
 #endif
 
 #if defined(arch_atomic_add_return_relaxed)
-static inline int
+static __always_inline int
 atomic_add_return_relaxed(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_add_return_relaxed(i, v);
 }
 #define atomic_add_return_relaxed atomic_add_return_relaxed
 #endif
 
 #if !defined(arch_atomic_fetch_add_relaxed) || defined(arch_atomic_fetch_add)
-static inline int
+static __always_inline int
 atomic_fetch_add(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_add(i, v);
 }
 #define atomic_fetch_add atomic_fetch_add
 #endif
 
 #if defined(arch_atomic_fetch_add_acquire)
-static inline int
+static __always_inline int
 atomic_fetch_add_acquire(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_add_acquire(i, v);
 }
 #define atomic_fetch_add_acquire atomic_fetch_add_acquire
 #endif
 
 #if defined(arch_atomic_fetch_add_release)
-static inline int
+static __always_inline int
 atomic_fetch_add_release(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_add_release(i, v);
 }
 #define atomic_fetch_add_release atomic_fetch_add_release
 #endif
 
 #if defined(arch_atomic_fetch_add_relaxed)
-static inline int
+static __always_inline int
 atomic_fetch_add_relaxed(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_add_relaxed(i, v);
 }
 #define atomic_fetch_add_relaxed atomic_fetch_add_relaxed
 #endif
 
-static inline void
+static __always_inline void
 atomic_sub(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_sub(i, v);
 }
 #define atomic_sub atomic_sub
 
 #if !defined(arch_atomic_sub_return_relaxed) || defined(arch_atomic_sub_return)
-static inline int
+static __always_inline int
 atomic_sub_return(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_sub_return(i, v);
 }
 #define atomic_sub_return atomic_sub_return
 #endif
 
 #if defined(arch_atomic_sub_return_acquire)
-static inline int
+static __always_inline int
 atomic_sub_return_acquire(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_sub_return_acquire(i, v);
 }
 #define atomic_sub_return_acquire atomic_sub_return_acquire
 #endif
 
 #if defined(arch_atomic_sub_return_release)
-static inline int
+static __always_inline int
 atomic_sub_return_release(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_sub_return_release(i, v);
 }
 #define atomic_sub_return_release atomic_sub_return_release
 #endif
 
 #if defined(arch_atomic_sub_return_relaxed)
-static inline int
+static __always_inline int
 atomic_sub_return_relaxed(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_sub_return_relaxed(i, v);
 }
 #define atomic_sub_return_relaxed atomic_sub_return_relaxed
 #endif
 
 #if !defined(arch_atomic_fetch_sub_relaxed) || defined(arch_atomic_fetch_sub)
-static inline int
+static __always_inline int
 atomic_fetch_sub(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_sub(i, v);
 }
 #define atomic_fetch_sub atomic_fetch_sub
 #endif
 
 #if defined(arch_atomic_fetch_sub_acquire)
-static inline int
+static __always_inline int
 atomic_fetch_sub_acquire(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_sub_acquire(i, v);
 }
 #define atomic_fetch_sub_acquire atomic_fetch_sub_acquire
 #endif
 
 #if defined(arch_atomic_fetch_sub_release)
-static inline int
+static __always_inline int
 atomic_fetch_sub_release(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_sub_release(i, v);
 }
 #define atomic_fetch_sub_release atomic_fetch_sub_release
 #endif
 
 #if defined(arch_atomic_fetch_sub_relaxed)
-static inline int
+static __always_inline int
 atomic_fetch_sub_relaxed(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_sub_relaxed(i, v);
 }
 #define atomic_fetch_sub_relaxed atomic_fetch_sub_relaxed
 #endif
 
 #if defined(arch_atomic_inc)
-static inline void
+static __always_inline void
 atomic_inc(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_inc(v);
 }
 #define atomic_inc atomic_inc
 #endif
 
 #if defined(arch_atomic_inc_return)
-static inline int
+static __always_inline int
 atomic_inc_return(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_inc_return(v);
 }
 #define atomic_inc_return atomic_inc_return
 #endif
 
 #if defined(arch_atomic_inc_return_acquire)
-static inline int
+static __always_inline int
 atomic_inc_return_acquire(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_inc_return_acquire(v);
 }
 #define atomic_inc_return_acquire atomic_inc_return_acquire
 #endif
 
 #if defined(arch_atomic_inc_return_release)
-static inline int
+static __always_inline int
 atomic_inc_return_release(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_inc_return_release(v);
 }
 #define atomic_inc_return_release atomic_inc_return_release
 #endif
 
 #if defined(arch_atomic_inc_return_relaxed)
-static inline int
+static __always_inline int
 atomic_inc_return_relaxed(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_inc_return_relaxed(v);
 }
 #define atomic_inc_return_relaxed atomic_inc_return_relaxed
 #endif
 
 #if defined(arch_atomic_fetch_inc)
-static inline int
+static __always_inline int
 atomic_fetch_inc(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_inc(v);
 }
 #define atomic_fetch_inc atomic_fetch_inc
 #endif
 
 #if defined(arch_atomic_fetch_inc_acquire)
-static inline int
+static __always_inline int
 atomic_fetch_inc_acquire(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_inc_acquire(v);
 }
 #define atomic_fetch_inc_acquire atomic_fetch_inc_acquire
 #endif
 
 #if defined(arch_atomic_fetch_inc_release)
-static inline int
+static __always_inline int
 atomic_fetch_inc_release(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_inc_release(v);
 }
 #define atomic_fetch_inc_release atomic_fetch_inc_release
 #endif
 
 #if defined(arch_atomic_fetch_inc_relaxed)
-static inline int
+static __always_inline int
 atomic_fetch_inc_relaxed(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_inc_relaxed(v);
 }
 #define atomic_fetch_inc_relaxed atomic_fetch_inc_relaxed
 #endif
 
 #if defined(arch_atomic_dec)
-static inline void
+static __always_inline void
 atomic_dec(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_dec(v);
 }
 #define atomic_dec atomic_dec
 #endif
 
 #if defined(arch_atomic_dec_return)
-static inline int
+static __always_inline int
 atomic_dec_return(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_dec_return(v);
 }
 #define atomic_dec_return atomic_dec_return
 #endif
 
 #if defined(arch_atomic_dec_return_acquire)
-static inline int
+static __always_inline int
 atomic_dec_return_acquire(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_dec_return_acquire(v);
 }
 #define atomic_dec_return_acquire atomic_dec_return_acquire
 #endif
 
 #if defined(arch_atomic_dec_return_release)
-static inline int
+static __always_inline int
 atomic_dec_return_release(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_dec_return_release(v);
 }
 #define atomic_dec_return_release atomic_dec_return_release
 #endif
 
 #if defined(arch_atomic_dec_return_relaxed)
-static inline int
+static __always_inline int
 atomic_dec_return_relaxed(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_dec_return_relaxed(v);
 }
 #define atomic_dec_return_relaxed atomic_dec_return_relaxed
 #endif
 
 #if defined(arch_atomic_fetch_dec)
-static inline int
+static __always_inline int
 atomic_fetch_dec(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_dec(v);
 }
 #define atomic_fetch_dec atomic_fetch_dec
 #endif
 
 #if defined(arch_atomic_fetch_dec_acquire)
-static inline int
+static __always_inline int
 atomic_fetch_dec_acquire(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_dec_acquire(v);
 }
 #define atomic_fetch_dec_acquire atomic_fetch_dec_acquire
 #endif
 
 #if defined(arch_atomic_fetch_dec_release)
-static inline int
+static __always_inline int
 atomic_fetch_dec_release(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_dec_release(v);
 }
 #define atomic_fetch_dec_release atomic_fetch_dec_release
 #endif
 
 #if defined(arch_atomic_fetch_dec_relaxed)
-static inline int
+static __always_inline int
 atomic_fetch_dec_relaxed(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_dec_relaxed(v);
 }
 #define atomic_fetch_dec_relaxed atomic_fetch_dec_relaxed
 #endif
 
-static inline void
+static __always_inline void
 atomic_and(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_and(i, v);
 }
 #define atomic_and atomic_and
 
 #if !defined(arch_atomic_fetch_and_relaxed) || defined(arch_atomic_fetch_and)
-static inline int
+static __always_inline int
 atomic_fetch_and(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_and(i, v);
 }
 #define atomic_fetch_and atomic_fetch_and
 #endif
 
 #if defined(arch_atomic_fetch_and_acquire)
-static inline int
+static __always_inline int
 atomic_fetch_and_acquire(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_and_acquire(i, v);
 }
 #define atomic_fetch_and_acquire atomic_fetch_and_acquire
 #endif
 
 #if defined(arch_atomic_fetch_and_release)
-static inline int
+static __always_inline int
 atomic_fetch_and_release(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_and_release(i, v);
 }
 #define atomic_fetch_and_release atomic_fetch_and_release
 #endif
 
 #if defined(arch_atomic_fetch_and_relaxed)
-static inline int
+static __always_inline int
 atomic_fetch_and_relaxed(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_and_relaxed(i, v);
 }
 #define atomic_fetch_and_relaxed atomic_fetch_and_relaxed
 #endif
 
 #if defined(arch_atomic_andnot)
-static inline void
+static __always_inline void
 atomic_andnot(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_andnot(i, v);
 }
 #define atomic_andnot atomic_andnot
 #endif
 
 #if defined(arch_atomic_fetch_andnot)
-static inline int
+static __always_inline int
 atomic_fetch_andnot(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_andnot(i, v);
 }
 #define atomic_fetch_andnot atomic_fetch_andnot
 #endif
 
 #if defined(arch_atomic_fetch_andnot_acquire)
-static inline int
+static __always_inline int
 atomic_fetch_andnot_acquire(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_andnot_acquire(i, v);
 }
 #define atomic_fetch_andnot_acquire atomic_fetch_andnot_acquire
 #endif
 
 #if defined(arch_atomic_fetch_andnot_release)
-static inline int
+static __always_inline int
 atomic_fetch_andnot_release(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_andnot_release(i, v);
 }
 #define atomic_fetch_andnot_release atomic_fetch_andnot_release
 #endif
 
 #if defined(arch_atomic_fetch_andnot_relaxed)
-static inline int
+static __always_inline int
 atomic_fetch_andnot_relaxed(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_andnot_relaxed(i, v);
 }
 #define atomic_fetch_andnot_relaxed atomic_fetch_andnot_relaxed
 #endif
 
-static inline void
+static __always_inline void
 atomic_or(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_or(i, v);
 }
 #define atomic_or atomic_or
 
 #if !defined(arch_atomic_fetch_or_relaxed) || defined(arch_atomic_fetch_or)
-static inline int
+static __always_inline int
 atomic_fetch_or(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_or(i, v);
 }
 #define atomic_fetch_or atomic_fetch_or
 #endif
 
 #if defined(arch_atomic_fetch_or_acquire)
-static inline int
+static __always_inline int
 atomic_fetch_or_acquire(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_or_acquire(i, v);
 }
 #define atomic_fetch_or_acquire atomic_fetch_or_acquire
 #endif
 
 #if defined(arch_atomic_fetch_or_release)
-static inline int
+static __always_inline int
 atomic_fetch_or_release(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_or_release(i, v);
 }
 #define atomic_fetch_or_release atomic_fetch_or_release
 #endif
 
 #if defined(arch_atomic_fetch_or_relaxed)
-static inline int
+static __always_inline int
 atomic_fetch_or_relaxed(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_or_relaxed(i, v);
 }
 #define atomic_fetch_or_relaxed atomic_fetch_or_relaxed
 #endif
 
-static inline void
+static __always_inline void
 atomic_xor(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic_xor(i, v);
 }
 #define atomic_xor atomic_xor
 
 #if !defined(arch_atomic_fetch_xor_relaxed) || defined(arch_atomic_fetch_xor)
-static inline int
+static __always_inline int
 atomic_fetch_xor(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_xor(i, v);
 }
 #define atomic_fetch_xor atomic_fetch_xor
 #endif
 
 #if defined(arch_atomic_fetch_xor_acquire)
-static inline int
+static __always_inline int
 atomic_fetch_xor_acquire(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_xor_acquire(i, v);
 }
 #define atomic_fetch_xor_acquire atomic_fetch_xor_acquire
 #endif
 
 #if defined(arch_atomic_fetch_xor_release)
-static inline int
+static __always_inline int
 atomic_fetch_xor_release(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_xor_release(i, v);
 }
 #define atomic_fetch_xor_release atomic_fetch_xor_release
 #endif
 
 #if defined(arch_atomic_fetch_xor_relaxed)
-static inline int
+static __always_inline int
 atomic_fetch_xor_relaxed(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_xor_relaxed(i, v);
 }
 #define atomic_fetch_xor_relaxed atomic_fetch_xor_relaxed
 #endif
 
 #if !defined(arch_atomic_xchg_relaxed) || defined(arch_atomic_xchg)
-static inline int
+static __always_inline int
 atomic_xchg(atomic_t *v, int i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_xchg(v, i);
 }
 #define atomic_xchg atomic_xchg
 #endif
 
 #if defined(arch_atomic_xchg_acquire)
-static inline int
+static __always_inline int
 atomic_xchg_acquire(atomic_t *v, int i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_xchg_acquire(v, i);
 }
 #define atomic_xchg_acquire atomic_xchg_acquire
 #endif
 
 #if defined(arch_atomic_xchg_release)
-static inline int
+static __always_inline int
 atomic_xchg_release(atomic_t *v, int i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_xchg_release(v, i);
 }
 #define atomic_xchg_release atomic_xchg_release
 #endif
 
 #if defined(arch_atomic_xchg_relaxed)
-static inline int
+static __always_inline int
 atomic_xchg_relaxed(atomic_t *v, int i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_xchg_relaxed(v, i);
 }
 #define atomic_xchg_relaxed atomic_xchg_relaxed
 #endif
 
 #if !defined(arch_atomic_cmpxchg_relaxed) || defined(arch_atomic_cmpxchg)
-static inline int
+static __always_inline int
 atomic_cmpxchg(atomic_t *v, int old, int new)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_cmpxchg(v, old, new);
 }
 #define atomic_cmpxchg atomic_cmpxchg
 #endif
 
 #if defined(arch_atomic_cmpxchg_acquire)
-static inline int
+static __always_inline int
 atomic_cmpxchg_acquire(atomic_t *v, int old, int new)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_cmpxchg_acquire(v, old, new);
 }
 #define atomic_cmpxchg_acquire atomic_cmpxchg_acquire
 #endif
 
 #if defined(arch_atomic_cmpxchg_release)
-static inline int
+static __always_inline int
 atomic_cmpxchg_release(atomic_t *v, int old, int new)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_cmpxchg_release(v, old, new);
 }
 #define atomic_cmpxchg_release atomic_cmpxchg_release
 #endif
 
 #if defined(arch_atomic_cmpxchg_relaxed)
-static inline int
+static __always_inline int
 atomic_cmpxchg_relaxed(atomic_t *v, int old, int new)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_cmpxchg_relaxed(v, old, new);
 }
 #define atomic_cmpxchg_relaxed atomic_cmpxchg_relaxed
 #endif
 
 #if defined(arch_atomic_try_cmpxchg)
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg(atomic_t *v, int *old, int new)
 {
-	kasan_check_write(v, sizeof(*v));
-	kasan_check_write(old, sizeof(*old));
+	instrument_atomic_write(v, sizeof(*v));
+	instrument_atomic_write(old, sizeof(*old));
 	return arch_atomic_try_cmpxchg(v, old, new);
 }
 #define atomic_try_cmpxchg atomic_try_cmpxchg
 #endif
 
 #if defined(arch_atomic_try_cmpxchg_acquire)
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg_acquire(atomic_t *v, int *old, int new)
 {
-	kasan_check_write(v, sizeof(*v));
-	kasan_check_write(old, sizeof(*old));
+	instrument_atomic_write(v, sizeof(*v));
+	instrument_atomic_write(old, sizeof(*old));
 	return arch_atomic_try_cmpxchg_acquire(v, old, new);
 }
 #define atomic_try_cmpxchg_acquire atomic_try_cmpxchg_acquire
 #endif
 
 #if defined(arch_atomic_try_cmpxchg_release)
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg_release(atomic_t *v, int *old, int new)
 {
-	kasan_check_write(v, sizeof(*v));
-	kasan_check_write(old, sizeof(*old));
+	instrument_atomic_write(v, sizeof(*v));
+	instrument_atomic_write(old, sizeof(*old));
 	return arch_atomic_try_cmpxchg_release(v, old, new);
 }
 #define atomic_try_cmpxchg_release atomic_try_cmpxchg_release
 #endif
 
 #if defined(arch_atomic_try_cmpxchg_relaxed)
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg_relaxed(atomic_t *v, int *old, int new)
 {
-	kasan_check_write(v, sizeof(*v));
-	kasan_check_write(old, sizeof(*old));
+	instrument_atomic_write(v, sizeof(*v));
+	instrument_atomic_write(old, sizeof(*old));
 	return arch_atomic_try_cmpxchg_relaxed(v, old, new);
 }
 #define atomic_try_cmpxchg_relaxed atomic_try_cmpxchg_relaxed
 #endif
 
 #if defined(arch_atomic_sub_and_test)
-static inline bool
+static __always_inline bool
 atomic_sub_and_test(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_sub_and_test(i, v);
 }
 #define atomic_sub_and_test atomic_sub_and_test
 #endif
 
 #if defined(arch_atomic_dec_and_test)
-static inline bool
+static __always_inline bool
 atomic_dec_and_test(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_dec_and_test(v);
 }
 #define atomic_dec_and_test atomic_dec_and_test
 #endif
 
 #if defined(arch_atomic_inc_and_test)
-static inline bool
+static __always_inline bool
 atomic_inc_and_test(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_inc_and_test(v);
 }
 #define atomic_inc_and_test atomic_inc_and_test
 #endif
 
 #if defined(arch_atomic_add_negative)
-static inline bool
+static __always_inline bool
 atomic_add_negative(int i, atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_add_negative(i, v);
 }
 #define atomic_add_negative atomic_add_negative
 #endif
 
 #if defined(arch_atomic_fetch_add_unless)
-static inline int
+static __always_inline int
 atomic_fetch_add_unless(atomic_t *v, int a, int u)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_fetch_add_unless(v, a, u);
 }
 #define atomic_fetch_add_unless atomic_fetch_add_unless
 #endif
 
 #if defined(arch_atomic_add_unless)
-static inline bool
+static __always_inline bool
 atomic_add_unless(atomic_t *v, int a, int u)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_add_unless(v, a, u);
 }
 #define atomic_add_unless atomic_add_unless
 #endif
 
 #if defined(arch_atomic_inc_not_zero)
-static inline bool
+static __always_inline bool
 atomic_inc_not_zero(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_inc_not_zero(v);
 }
 #define atomic_inc_not_zero atomic_inc_not_zero
 #endif
 
 #if defined(arch_atomic_inc_unless_negative)
-static inline bool
+static __always_inline bool
 atomic_inc_unless_negative(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_inc_unless_negative(v);
 }
 #define atomic_inc_unless_negative atomic_inc_unless_negative
 #endif
 
 #if defined(arch_atomic_dec_unless_positive)
-static inline bool
+static __always_inline bool
 atomic_dec_unless_positive(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_dec_unless_positive(v);
 }
 #define atomic_dec_unless_positive atomic_dec_unless_positive
 #endif
 
 #if defined(arch_atomic_dec_if_positive)
-static inline int
+static __always_inline int
 atomic_dec_if_positive(atomic_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic_dec_if_positive(v);
 }
 #define atomic_dec_if_positive atomic_dec_if_positive
 #endif
 
-static inline s64
+static __always_inline s64
 atomic64_read(const atomic64_t *v)
 {
-	kasan_check_read(v, sizeof(*v));
+	instrument_atomic_read(v, sizeof(*v));
 	return arch_atomic64_read(v);
 }
 #define atomic64_read atomic64_read
 
 #if defined(arch_atomic64_read_acquire)
-static inline s64
+static __always_inline s64
 atomic64_read_acquire(const atomic64_t *v)
 {
-	kasan_check_read(v, sizeof(*v));
+	instrument_atomic_read(v, sizeof(*v));
 	return arch_atomic64_read_acquire(v);
 }
 #define atomic64_read_acquire atomic64_read_acquire
 #endif
 
-static inline void
+static __always_inline void
 atomic64_set(atomic64_t *v, s64 i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_set(v, i);
 }
 #define atomic64_set atomic64_set
 
 #if defined(arch_atomic64_set_release)
-static inline void
+static __always_inline void
 atomic64_set_release(atomic64_t *v, s64 i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_set_release(v, i);
 }
 #define atomic64_set_release atomic64_set_release
 #endif
 
-static inline void
+static __always_inline void
 atomic64_add(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_add(i, v);
 }
 #define atomic64_add atomic64_add
 
 #if !defined(arch_atomic64_add_return_relaxed) || defined(arch_atomic64_add_return)
-static inline s64
+static __always_inline s64
 atomic64_add_return(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_add_return(i, v);
 }
 #define atomic64_add_return atomic64_add_return
 #endif
 
 #if defined(arch_atomic64_add_return_acquire)
-static inline s64
+static __always_inline s64
 atomic64_add_return_acquire(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_add_return_acquire(i, v);
 }
 #define atomic64_add_return_acquire atomic64_add_return_acquire
 #endif
 
 #if defined(arch_atomic64_add_return_release)
-static inline s64
+static __always_inline s64
 atomic64_add_return_release(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_add_return_release(i, v);
 }
 #define atomic64_add_return_release atomic64_add_return_release
 #endif
 
 #if defined(arch_atomic64_add_return_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_add_return_relaxed(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_add_return_relaxed(i, v);
 }
 #define atomic64_add_return_relaxed atomic64_add_return_relaxed
 #endif
 
 #if !defined(arch_atomic64_fetch_add_relaxed) || defined(arch_atomic64_fetch_add)
-static inline s64
+static __always_inline s64
 atomic64_fetch_add(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_add(i, v);
 }
 #define atomic64_fetch_add atomic64_fetch_add
 #endif
 
 #if defined(arch_atomic64_fetch_add_acquire)
-static inline s64
+static __always_inline s64
 atomic64_fetch_add_acquire(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_add_acquire(i, v);
 }
 #define atomic64_fetch_add_acquire atomic64_fetch_add_acquire
 #endif
 
 #if defined(arch_atomic64_fetch_add_release)
-static inline s64
+static __always_inline s64
 atomic64_fetch_add_release(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_add_release(i, v);
 }
 #define atomic64_fetch_add_release atomic64_fetch_add_release
 #endif
 
 #if defined(arch_atomic64_fetch_add_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_fetch_add_relaxed(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_add_relaxed(i, v);
 }
 #define atomic64_fetch_add_relaxed atomic64_fetch_add_relaxed
 #endif
 
-static inline void
+static __always_inline void
 atomic64_sub(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_sub(i, v);
 }
 #define atomic64_sub atomic64_sub
 
 #if !defined(arch_atomic64_sub_return_relaxed) || defined(arch_atomic64_sub_return)
-static inline s64
+static __always_inline s64
 atomic64_sub_return(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_sub_return(i, v);
 }
 #define atomic64_sub_return atomic64_sub_return
 #endif
 
 #if defined(arch_atomic64_sub_return_acquire)
-static inline s64
+static __always_inline s64
 atomic64_sub_return_acquire(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_sub_return_acquire(i, v);
 }
 #define atomic64_sub_return_acquire atomic64_sub_return_acquire
 #endif
 
 #if defined(arch_atomic64_sub_return_release)
-static inline s64
+static __always_inline s64
 atomic64_sub_return_release(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_sub_return_release(i, v);
 }
 #define atomic64_sub_return_release atomic64_sub_return_release
 #endif
 
 #if defined(arch_atomic64_sub_return_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_sub_return_relaxed(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_sub_return_relaxed(i, v);
 }
 #define atomic64_sub_return_relaxed atomic64_sub_return_relaxed
 #endif
 
 #if !defined(arch_atomic64_fetch_sub_relaxed) || defined(arch_atomic64_fetch_sub)
-static inline s64
+static __always_inline s64
 atomic64_fetch_sub(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_sub(i, v);
 }
 #define atomic64_fetch_sub atomic64_fetch_sub
 #endif
 
 #if defined(arch_atomic64_fetch_sub_acquire)
-static inline s64
+static __always_inline s64
 atomic64_fetch_sub_acquire(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_sub_acquire(i, v);
 }
 #define atomic64_fetch_sub_acquire atomic64_fetch_sub_acquire
 #endif
 
 #if defined(arch_atomic64_fetch_sub_release)
-static inline s64
+static __always_inline s64
 atomic64_fetch_sub_release(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_sub_release(i, v);
 }
 #define atomic64_fetch_sub_release atomic64_fetch_sub_release
 #endif
 
 #if defined(arch_atomic64_fetch_sub_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_fetch_sub_relaxed(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_sub_relaxed(i, v);
 }
 #define atomic64_fetch_sub_relaxed atomic64_fetch_sub_relaxed
 #endif
 
 #if defined(arch_atomic64_inc)
-static inline void
+static __always_inline void
 atomic64_inc(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_inc(v);
 }
 #define atomic64_inc atomic64_inc
 #endif
 
 #if defined(arch_atomic64_inc_return)
-static inline s64
+static __always_inline s64
 atomic64_inc_return(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_inc_return(v);
 }
 #define atomic64_inc_return atomic64_inc_return
 #endif
 
 #if defined(arch_atomic64_inc_return_acquire)
-static inline s64
+static __always_inline s64
 atomic64_inc_return_acquire(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_inc_return_acquire(v);
 }
 #define atomic64_inc_return_acquire atomic64_inc_return_acquire
 #endif
 
 #if defined(arch_atomic64_inc_return_release)
-static inline s64
+static __always_inline s64
 atomic64_inc_return_release(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_inc_return_release(v);
 }
 #define atomic64_inc_return_release atomic64_inc_return_release
 #endif
 
 #if defined(arch_atomic64_inc_return_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_inc_return_relaxed(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_inc_return_relaxed(v);
 }
 #define atomic64_inc_return_relaxed atomic64_inc_return_relaxed
 #endif
 
 #if defined(arch_atomic64_fetch_inc)
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_inc(v);
 }
 #define atomic64_fetch_inc atomic64_fetch_inc
 #endif
 
 #if defined(arch_atomic64_fetch_inc_acquire)
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc_acquire(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_inc_acquire(v);
 }
 #define atomic64_fetch_inc_acquire atomic64_fetch_inc_acquire
 #endif
 
 #if defined(arch_atomic64_fetch_inc_release)
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc_release(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_inc_release(v);
 }
 #define atomic64_fetch_inc_release atomic64_fetch_inc_release
 #endif
 
 #if defined(arch_atomic64_fetch_inc_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc_relaxed(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_inc_relaxed(v);
 }
 #define atomic64_fetch_inc_relaxed atomic64_fetch_inc_relaxed
 #endif
 
 #if defined(arch_atomic64_dec)
-static inline void
+static __always_inline void
 atomic64_dec(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_dec(v);
 }
 #define atomic64_dec atomic64_dec
 #endif
 
 #if defined(arch_atomic64_dec_return)
-static inline s64
+static __always_inline s64
 atomic64_dec_return(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_dec_return(v);
 }
 #define atomic64_dec_return atomic64_dec_return
 #endif
 
 #if defined(arch_atomic64_dec_return_acquire)
-static inline s64
+static __always_inline s64
 atomic64_dec_return_acquire(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_dec_return_acquire(v);
 }
 #define atomic64_dec_return_acquire atomic64_dec_return_acquire
 #endif
 
 #if defined(arch_atomic64_dec_return_release)
-static inline s64
+static __always_inline s64
 atomic64_dec_return_release(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_dec_return_release(v);
 }
 #define atomic64_dec_return_release atomic64_dec_return_release
 #endif
 
 #if defined(arch_atomic64_dec_return_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_dec_return_relaxed(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_dec_return_relaxed(v);
 }
 #define atomic64_dec_return_relaxed atomic64_dec_return_relaxed
 #endif
 
 #if defined(arch_atomic64_fetch_dec)
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_dec(v);
 }
 #define atomic64_fetch_dec atomic64_fetch_dec
 #endif
 
 #if defined(arch_atomic64_fetch_dec_acquire)
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec_acquire(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_dec_acquire(v);
 }
 #define atomic64_fetch_dec_acquire atomic64_fetch_dec_acquire
 #endif
 
 #if defined(arch_atomic64_fetch_dec_release)
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec_release(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_dec_release(v);
 }
 #define atomic64_fetch_dec_release atomic64_fetch_dec_release
 #endif
 
 #if defined(arch_atomic64_fetch_dec_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec_relaxed(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_dec_relaxed(v);
 }
 #define atomic64_fetch_dec_relaxed atomic64_fetch_dec_relaxed
 #endif
 
-static inline void
+static __always_inline void
 atomic64_and(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_and(i, v);
 }
 #define atomic64_and atomic64_and
 
 #if !defined(arch_atomic64_fetch_and_relaxed) || defined(arch_atomic64_fetch_and)
-static inline s64
+static __always_inline s64
 atomic64_fetch_and(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_and(i, v);
 }
 #define atomic64_fetch_and atomic64_fetch_and
 #endif
 
 #if defined(arch_atomic64_fetch_and_acquire)
-static inline s64
+static __always_inline s64
 atomic64_fetch_and_acquire(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_and_acquire(i, v);
 }
 #define atomic64_fetch_and_acquire atomic64_fetch_and_acquire
 #endif
 
 #if defined(arch_atomic64_fetch_and_release)
-static inline s64
+static __always_inline s64
 atomic64_fetch_and_release(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_and_release(i, v);
 }
 #define atomic64_fetch_and_release atomic64_fetch_and_release
 #endif
 
 #if defined(arch_atomic64_fetch_and_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_fetch_and_relaxed(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_and_relaxed(i, v);
 }
 #define atomic64_fetch_and_relaxed atomic64_fetch_and_relaxed
 #endif
 
 #if defined(arch_atomic64_andnot)
-static inline void
+static __always_inline void
 atomic64_andnot(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_andnot(i, v);
 }
 #define atomic64_andnot atomic64_andnot
 #endif
 
 #if defined(arch_atomic64_fetch_andnot)
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_andnot(i, v);
 }
 #define atomic64_fetch_andnot atomic64_fetch_andnot
 #endif
 
 #if defined(arch_atomic64_fetch_andnot_acquire)
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot_acquire(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_andnot_acquire(i, v);
 }
 #define atomic64_fetch_andnot_acquire atomic64_fetch_andnot_acquire
 #endif
 
 #if defined(arch_atomic64_fetch_andnot_release)
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot_release(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_andnot_release(i, v);
 }
 #define atomic64_fetch_andnot_release atomic64_fetch_andnot_release
 #endif
 
 #if defined(arch_atomic64_fetch_andnot_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot_relaxed(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_andnot_relaxed(i, v);
 }
 #define atomic64_fetch_andnot_relaxed atomic64_fetch_andnot_relaxed
 #endif
 
-static inline void
+static __always_inline void
 atomic64_or(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_or(i, v);
 }
 #define atomic64_or atomic64_or
 
 #if !defined(arch_atomic64_fetch_or_relaxed) || defined(arch_atomic64_fetch_or)
-static inline s64
+static __always_inline s64
 atomic64_fetch_or(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_or(i, v);
 }
 #define atomic64_fetch_or atomic64_fetch_or
 #endif
 
 #if defined(arch_atomic64_fetch_or_acquire)
-static inline s64
+static __always_inline s64
 atomic64_fetch_or_acquire(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_or_acquire(i, v);
 }
 #define atomic64_fetch_or_acquire atomic64_fetch_or_acquire
 #endif
 
 #if defined(arch_atomic64_fetch_or_release)
-static inline s64
+static __always_inline s64
 atomic64_fetch_or_release(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_or_release(i, v);
 }
 #define atomic64_fetch_or_release atomic64_fetch_or_release
 #endif
 
 #if defined(arch_atomic64_fetch_or_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_fetch_or_relaxed(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_or_relaxed(i, v);
 }
 #define atomic64_fetch_or_relaxed atomic64_fetch_or_relaxed
 #endif
 
-static inline void
+static __always_inline void
 atomic64_xor(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	arch_atomic64_xor(i, v);
 }
 #define atomic64_xor atomic64_xor
 
 #if !defined(arch_atomic64_fetch_xor_relaxed) || defined(arch_atomic64_fetch_xor)
-static inline s64
+static __always_inline s64
 atomic64_fetch_xor(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_xor(i, v);
 }
 #define atomic64_fetch_xor atomic64_fetch_xor
 #endif
 
 #if defined(arch_atomic64_fetch_xor_acquire)
-static inline s64
+static __always_inline s64
 atomic64_fetch_xor_acquire(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_xor_acquire(i, v);
 }
 #define atomic64_fetch_xor_acquire atomic64_fetch_xor_acquire
 #endif
 
 #if defined(arch_atomic64_fetch_xor_release)
-static inline s64
+static __always_inline s64
 atomic64_fetch_xor_release(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_xor_release(i, v);
 }
 #define atomic64_fetch_xor_release atomic64_fetch_xor_release
 #endif
 
 #if defined(arch_atomic64_fetch_xor_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_fetch_xor_relaxed(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_xor_relaxed(i, v);
 }
 #define atomic64_fetch_xor_relaxed atomic64_fetch_xor_relaxed
 #endif
 
 #if !defined(arch_atomic64_xchg_relaxed) || defined(arch_atomic64_xchg)
-static inline s64
+static __always_inline s64
 atomic64_xchg(atomic64_t *v, s64 i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_xchg(v, i);
 }
 #define atomic64_xchg atomic64_xchg
 #endif
 
 #if defined(arch_atomic64_xchg_acquire)
-static inline s64
+static __always_inline s64
 atomic64_xchg_acquire(atomic64_t *v, s64 i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_xchg_acquire(v, i);
 }
 #define atomic64_xchg_acquire atomic64_xchg_acquire
 #endif
 
 #if defined(arch_atomic64_xchg_release)
-static inline s64
+static __always_inline s64
 atomic64_xchg_release(atomic64_t *v, s64 i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_xchg_release(v, i);
 }
 #define atomic64_xchg_release atomic64_xchg_release
 #endif
 
 #if defined(arch_atomic64_xchg_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_xchg_relaxed(atomic64_t *v, s64 i)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_xchg_relaxed(v, i);
 }
 #define atomic64_xchg_relaxed atomic64_xchg_relaxed
 #endif
 
 #if !defined(arch_atomic64_cmpxchg_relaxed) || defined(arch_atomic64_cmpxchg)
-static inline s64
+static __always_inline s64
 atomic64_cmpxchg(atomic64_t *v, s64 old, s64 new)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_cmpxchg(v, old, new);
 }
 #define atomic64_cmpxchg atomic64_cmpxchg
 #endif
 
 #if defined(arch_atomic64_cmpxchg_acquire)
-static inline s64
+static __always_inline s64
 atomic64_cmpxchg_acquire(atomic64_t *v, s64 old, s64 new)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_cmpxchg_acquire(v, old, new);
 }
 #define atomic64_cmpxchg_acquire atomic64_cmpxchg_acquire
 #endif
 
 #if defined(arch_atomic64_cmpxchg_release)
-static inline s64
+static __always_inline s64
 atomic64_cmpxchg_release(atomic64_t *v, s64 old, s64 new)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_cmpxchg_release(v, old, new);
 }
 #define atomic64_cmpxchg_release atomic64_cmpxchg_release
 #endif
 
 #if defined(arch_atomic64_cmpxchg_relaxed)
-static inline s64
+static __always_inline s64
 atomic64_cmpxchg_relaxed(atomic64_t *v, s64 old, s64 new)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_cmpxchg_relaxed(v, old, new);
 }
 #define atomic64_cmpxchg_relaxed atomic64_cmpxchg_relaxed
 #endif
 
 #if defined(arch_atomic64_try_cmpxchg)
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg(atomic64_t *v, s64 *old, s64 new)
 {
-	kasan_check_write(v, sizeof(*v));
-	kasan_check_write(old, sizeof(*old));
+	instrument_atomic_write(v, sizeof(*v));
+	instrument_atomic_write(old, sizeof(*old));
 	return arch_atomic64_try_cmpxchg(v, old, new);
 }
 #define atomic64_try_cmpxchg atomic64_try_cmpxchg
 #endif
 
 #if defined(arch_atomic64_try_cmpxchg_acquire)
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg_acquire(atomic64_t *v, s64 *old, s64 new)
 {
-	kasan_check_write(v, sizeof(*v));
-	kasan_check_write(old, sizeof(*old));
+	instrument_atomic_write(v, sizeof(*v));
+	instrument_atomic_write(old, sizeof(*old));
 	return arch_atomic64_try_cmpxchg_acquire(v, old, new);
 }
 #define atomic64_try_cmpxchg_acquire atomic64_try_cmpxchg_acquire
 #endif
 
 #if defined(arch_atomic64_try_cmpxchg_release)
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg_release(atomic64_t *v, s64 *old, s64 new)
 {
-	kasan_check_write(v, sizeof(*v));
-	kasan_check_write(old, sizeof(*old));
+	instrument_atomic_write(v, sizeof(*v));
+	instrument_atomic_write(old, sizeof(*old));
 	return arch_atomic64_try_cmpxchg_release(v, old, new);
 }
 #define atomic64_try_cmpxchg_release atomic64_try_cmpxchg_release
 #endif
 
 #if defined(arch_atomic64_try_cmpxchg_relaxed)
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg_relaxed(atomic64_t *v, s64 *old, s64 new)
 {
-	kasan_check_write(v, sizeof(*v));
-	kasan_check_write(old, sizeof(*old));
+	instrument_atomic_write(v, sizeof(*v));
+	instrument_atomic_write(old, sizeof(*old));
 	return arch_atomic64_try_cmpxchg_relaxed(v, old, new);
 }
 #define atomic64_try_cmpxchg_relaxed atomic64_try_cmpxchg_relaxed
 #endif
 
 #if defined(arch_atomic64_sub_and_test)
-static inline bool
+static __always_inline bool
 atomic64_sub_and_test(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_sub_and_test(i, v);
 }
 #define atomic64_sub_and_test atomic64_sub_and_test
 #endif
 
 #if defined(arch_atomic64_dec_and_test)
-static inline bool
+static __always_inline bool
 atomic64_dec_and_test(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_dec_and_test(v);
 }
 #define atomic64_dec_and_test atomic64_dec_and_test
 #endif
 
 #if defined(arch_atomic64_inc_and_test)
-static inline bool
+static __always_inline bool
 atomic64_inc_and_test(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_inc_and_test(v);
 }
 #define atomic64_inc_and_test atomic64_inc_and_test
 #endif
 
 #if defined(arch_atomic64_add_negative)
-static inline bool
+static __always_inline bool
 atomic64_add_negative(s64 i, atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_add_negative(i, v);
 }
 #define atomic64_add_negative atomic64_add_negative
 #endif
 
 #if defined(arch_atomic64_fetch_add_unless)
-static inline s64
+static __always_inline s64
 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_fetch_add_unless(v, a, u);
 }
 #define atomic64_fetch_add_unless atomic64_fetch_add_unless
 #endif
 
 #if defined(arch_atomic64_add_unless)
-static inline bool
+static __always_inline bool
 atomic64_add_unless(atomic64_t *v, s64 a, s64 u)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_add_unless(v, a, u);
 }
 #define atomic64_add_unless atomic64_add_unless
 #endif
 
 #if defined(arch_atomic64_inc_not_zero)
-static inline bool
+static __always_inline bool
 atomic64_inc_not_zero(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_inc_not_zero(v);
 }
 #define atomic64_inc_not_zero atomic64_inc_not_zero
 #endif
 
 #if defined(arch_atomic64_inc_unless_negative)
-static inline bool
+static __always_inline bool
 atomic64_inc_unless_negative(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_inc_unless_negative(v);
 }
 #define atomic64_inc_unless_negative atomic64_inc_unless_negative
 #endif
 
 #if defined(arch_atomic64_dec_unless_positive)
-static inline bool
+static __always_inline bool
 atomic64_dec_unless_positive(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_dec_unless_positive(v);
 }
 #define atomic64_dec_unless_positive atomic64_dec_unless_positive
 #endif
 
 #if defined(arch_atomic64_dec_if_positive)
-static inline s64
+static __always_inline s64
 atomic64_dec_if_positive(atomic64_t *v)
 {
-	kasan_check_write(v, sizeof(*v));
+	instrument_atomic_write(v, sizeof(*v));
 	return arch_atomic64_dec_if_positive(v);
 }
 #define atomic64_dec_if_positive atomic64_dec_if_positive
@@ -1644,7 +1645,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define xchg(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_xchg(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1653,7 +1654,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define xchg_acquire(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_xchg_acquire(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1662,7 +1663,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define xchg_release(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_xchg_release(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1671,7 +1672,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define xchg_relaxed(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_xchg_relaxed(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1680,7 +1681,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1689,7 +1690,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg_acquire(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg_acquire(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1698,7 +1699,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg_release(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg_release(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1707,7 +1708,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg_relaxed(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg_relaxed(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1716,7 +1717,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg64(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg64(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1725,7 +1726,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg64_acquire(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg64_acquire(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1734,7 +1735,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg64_release(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg64_release(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1743,7 +1744,7 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg64_relaxed(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg64_relaxed(__ai_ptr, __VA_ARGS__);				\
 })
 #endif
@@ -1751,28 +1752,28 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg_local(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg_local(__ai_ptr, __VA_ARGS__);				\
 })
 
 #define cmpxchg64_local(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_cmpxchg64_local(__ai_ptr, __VA_ARGS__);				\
 })
 
 #define sync_cmpxchg(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, sizeof(*__ai_ptr));		\
 	arch_sync_cmpxchg(__ai_ptr, __VA_ARGS__);				\
 })
 
 #define cmpxchg_double(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, 2 * sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, 2 * sizeof(*__ai_ptr));		\
 	arch_cmpxchg_double(__ai_ptr, __VA_ARGS__);				\
 })
 
@@ -1780,9 +1781,9 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define cmpxchg_double_local(ptr, ...)						\
 ({									\
 	typeof(ptr) __ai_ptr = (ptr);					\
-	kasan_check_write(__ai_ptr, 2 * sizeof(*__ai_ptr));		\
+	instrument_atomic_write(__ai_ptr, 2 * sizeof(*__ai_ptr));		\
 	arch_cmpxchg_double_local(__ai_ptr, __VA_ARGS__);				\
 })
 
 #endif /* _ASM_GENERIC_ATOMIC_INSTRUMENTED_H */
-// b29b625d5de9280f680e42c7be859b55b15e5f6a
+// 89bf97f3a7509b740845e51ddf31055b48a81f40
diff --git a/include/asm-generic/atomic-long.h b/include/asm-generic/atomic-long.h
index 881c7e27af28..073cf40f431b 100644
--- a/include/asm-generic/atomic-long.h
+++ b/include/asm-generic/atomic-long.h
@@ -6,6 +6,7 @@
 #ifndef _ASM_GENERIC_ATOMIC_LONG_H
 #define _ASM_GENERIC_ATOMIC_LONG_H
 
+#include <linux/compiler.h>
 #include <asm/types.h>
 
 #ifdef CONFIG_64BIT
@@ -22,493 +23,493 @@ typedef atomic_t atomic_long_t;
 
 #ifdef CONFIG_64BIT
 
-static inline long
+static __always_inline long
 atomic_long_read(const atomic_long_t *v)
 {
 	return atomic64_read(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_read_acquire(const atomic_long_t *v)
 {
 	return atomic64_read_acquire(v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_set(atomic_long_t *v, long i)
 {
 	atomic64_set(v, i);
 }
 
-static inline void
+static __always_inline void
 atomic_long_set_release(atomic_long_t *v, long i)
 {
 	atomic64_set_release(v, i);
 }
 
-static inline void
+static __always_inline void
 atomic_long_add(long i, atomic_long_t *v)
 {
 	atomic64_add(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_add_return(long i, atomic_long_t *v)
 {
 	return atomic64_add_return(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_add_return_acquire(long i, atomic_long_t *v)
 {
 	return atomic64_add_return_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_add_return_release(long i, atomic_long_t *v)
 {
 	return atomic64_add_return_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_add_return_relaxed(long i, atomic_long_t *v)
 {
 	return atomic64_add_return_relaxed(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_add(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add_acquire(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_add_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add_release(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_add_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add_relaxed(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_add_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_sub(long i, atomic_long_t *v)
 {
 	atomic64_sub(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_sub_return(long i, atomic_long_t *v)
 {
 	return atomic64_sub_return(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_sub_return_acquire(long i, atomic_long_t *v)
 {
 	return atomic64_sub_return_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_sub_return_release(long i, atomic_long_t *v)
 {
 	return atomic64_sub_return_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_sub_return_relaxed(long i, atomic_long_t *v)
 {
 	return atomic64_sub_return_relaxed(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_sub(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_sub(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_sub_acquire(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_sub_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_sub_release(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_sub_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_sub_relaxed(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_sub_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_inc(atomic_long_t *v)
 {
 	atomic64_inc(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_inc_return(atomic_long_t *v)
 {
 	return atomic64_inc_return(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_inc_return_acquire(atomic_long_t *v)
 {
 	return atomic64_inc_return_acquire(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_inc_return_release(atomic_long_t *v)
 {
 	return atomic64_inc_return_release(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_inc_return_relaxed(atomic_long_t *v)
 {
 	return atomic64_inc_return_relaxed(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_inc(atomic_long_t *v)
 {
 	return atomic64_fetch_inc(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_inc_acquire(atomic_long_t *v)
 {
 	return atomic64_fetch_inc_acquire(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_inc_release(atomic_long_t *v)
 {
 	return atomic64_fetch_inc_release(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_inc_relaxed(atomic_long_t *v)
 {
 	return atomic64_fetch_inc_relaxed(v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_dec(atomic_long_t *v)
 {
 	atomic64_dec(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_return(atomic_long_t *v)
 {
 	return atomic64_dec_return(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_return_acquire(atomic_long_t *v)
 {
 	return atomic64_dec_return_acquire(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_return_release(atomic_long_t *v)
 {
 	return atomic64_dec_return_release(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_return_relaxed(atomic_long_t *v)
 {
 	return atomic64_dec_return_relaxed(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_dec(atomic_long_t *v)
 {
 	return atomic64_fetch_dec(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_dec_acquire(atomic_long_t *v)
 {
 	return atomic64_fetch_dec_acquire(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_dec_release(atomic_long_t *v)
 {
 	return atomic64_fetch_dec_release(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_dec_relaxed(atomic_long_t *v)
 {
 	return atomic64_fetch_dec_relaxed(v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_and(long i, atomic_long_t *v)
 {
 	atomic64_and(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_and(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_and(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_and_acquire(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_and_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_and_release(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_and_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_and_relaxed(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_and_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_andnot(long i, atomic_long_t *v)
 {
 	atomic64_andnot(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_andnot(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_andnot(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_andnot_acquire(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_andnot_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_andnot_release(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_andnot_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_andnot_relaxed(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_andnot_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_or(long i, atomic_long_t *v)
 {
 	atomic64_or(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_or(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_or(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_or_acquire(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_or_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_or_release(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_or_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_or_relaxed(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_or_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_xor(long i, atomic_long_t *v)
 {
 	atomic64_xor(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_xor(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_xor(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_xor_acquire(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_xor_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_xor_release(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_xor_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_xor_relaxed(long i, atomic_long_t *v)
 {
 	return atomic64_fetch_xor_relaxed(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_xchg(atomic_long_t *v, long i)
 {
 	return atomic64_xchg(v, i);
 }
 
-static inline long
+static __always_inline long
 atomic_long_xchg_acquire(atomic_long_t *v, long i)
 {
 	return atomic64_xchg_acquire(v, i);
 }
 
-static inline long
+static __always_inline long
 atomic_long_xchg_release(atomic_long_t *v, long i)
 {
 	return atomic64_xchg_release(v, i);
 }
 
-static inline long
+static __always_inline long
 atomic_long_xchg_relaxed(atomic_long_t *v, long i)
 {
 	return atomic64_xchg_relaxed(v, i);
 }
 
-static inline long
+static __always_inline long
 atomic_long_cmpxchg(atomic_long_t *v, long old, long new)
 {
 	return atomic64_cmpxchg(v, old, new);
 }
 
-static inline long
+static __always_inline long
 atomic_long_cmpxchg_acquire(atomic_long_t *v, long old, long new)
 {
 	return atomic64_cmpxchg_acquire(v, old, new);
 }
 
-static inline long
+static __always_inline long
 atomic_long_cmpxchg_release(atomic_long_t *v, long old, long new)
 {
 	return atomic64_cmpxchg_release(v, old, new);
 }
 
-static inline long
+static __always_inline long
 atomic_long_cmpxchg_relaxed(atomic_long_t *v, long old, long new)
 {
 	return atomic64_cmpxchg_relaxed(v, old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_try_cmpxchg(atomic_long_t *v, long *old, long new)
 {
 	return atomic64_try_cmpxchg(v, (s64 *)old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_try_cmpxchg_acquire(atomic_long_t *v, long *old, long new)
 {
 	return atomic64_try_cmpxchg_acquire(v, (s64 *)old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_try_cmpxchg_release(atomic_long_t *v, long *old, long new)
 {
 	return atomic64_try_cmpxchg_release(v, (s64 *)old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_try_cmpxchg_relaxed(atomic_long_t *v, long *old, long new)
 {
 	return atomic64_try_cmpxchg_relaxed(v, (s64 *)old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_sub_and_test(long i, atomic_long_t *v)
 {
 	return atomic64_sub_and_test(i, v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_dec_and_test(atomic_long_t *v)
 {
 	return atomic64_dec_and_test(v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_inc_and_test(atomic_long_t *v)
 {
 	return atomic64_inc_and_test(v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_add_negative(long i, atomic_long_t *v)
 {
 	return atomic64_add_negative(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add_unless(atomic_long_t *v, long a, long u)
 {
 	return atomic64_fetch_add_unless(v, a, u);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_add_unless(atomic_long_t *v, long a, long u)
 {
 	return atomic64_add_unless(v, a, u);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_inc_not_zero(atomic_long_t *v)
 {
 	return atomic64_inc_not_zero(v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_inc_unless_negative(atomic_long_t *v)
 {
 	return atomic64_inc_unless_negative(v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_dec_unless_positive(atomic_long_t *v)
 {
 	return atomic64_dec_unless_positive(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_if_positive(atomic_long_t *v)
 {
 	return atomic64_dec_if_positive(v);
@@ -516,493 +517,493 @@ atomic_long_dec_if_positive(atomic_long_t *v)
 
 #else /* CONFIG_64BIT */
 
-static inline long
+static __always_inline long
 atomic_long_read(const atomic_long_t *v)
 {
 	return atomic_read(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_read_acquire(const atomic_long_t *v)
 {
 	return atomic_read_acquire(v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_set(atomic_long_t *v, long i)
 {
 	atomic_set(v, i);
 }
 
-static inline void
+static __always_inline void
 atomic_long_set_release(atomic_long_t *v, long i)
 {
 	atomic_set_release(v, i);
 }
 
-static inline void
+static __always_inline void
 atomic_long_add(long i, atomic_long_t *v)
 {
 	atomic_add(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_add_return(long i, atomic_long_t *v)
 {
 	return atomic_add_return(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_add_return_acquire(long i, atomic_long_t *v)
 {
 	return atomic_add_return_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_add_return_release(long i, atomic_long_t *v)
 {
 	return atomic_add_return_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_add_return_relaxed(long i, atomic_long_t *v)
 {
 	return atomic_add_return_relaxed(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add(long i, atomic_long_t *v)
 {
 	return atomic_fetch_add(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add_acquire(long i, atomic_long_t *v)
 {
 	return atomic_fetch_add_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add_release(long i, atomic_long_t *v)
 {
 	return atomic_fetch_add_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add_relaxed(long i, atomic_long_t *v)
 {
 	return atomic_fetch_add_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_sub(long i, atomic_long_t *v)
 {
 	atomic_sub(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_sub_return(long i, atomic_long_t *v)
 {
 	return atomic_sub_return(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_sub_return_acquire(long i, atomic_long_t *v)
 {
 	return atomic_sub_return_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_sub_return_release(long i, atomic_long_t *v)
 {
 	return atomic_sub_return_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_sub_return_relaxed(long i, atomic_long_t *v)
 {
 	return atomic_sub_return_relaxed(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_sub(long i, atomic_long_t *v)
 {
 	return atomic_fetch_sub(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_sub_acquire(long i, atomic_long_t *v)
 {
 	return atomic_fetch_sub_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_sub_release(long i, atomic_long_t *v)
 {
 	return atomic_fetch_sub_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_sub_relaxed(long i, atomic_long_t *v)
 {
 	return atomic_fetch_sub_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_inc(atomic_long_t *v)
 {
 	atomic_inc(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_inc_return(atomic_long_t *v)
 {
 	return atomic_inc_return(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_inc_return_acquire(atomic_long_t *v)
 {
 	return atomic_inc_return_acquire(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_inc_return_release(atomic_long_t *v)
 {
 	return atomic_inc_return_release(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_inc_return_relaxed(atomic_long_t *v)
 {
 	return atomic_inc_return_relaxed(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_inc(atomic_long_t *v)
 {
 	return atomic_fetch_inc(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_inc_acquire(atomic_long_t *v)
 {
 	return atomic_fetch_inc_acquire(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_inc_release(atomic_long_t *v)
 {
 	return atomic_fetch_inc_release(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_inc_relaxed(atomic_long_t *v)
 {
 	return atomic_fetch_inc_relaxed(v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_dec(atomic_long_t *v)
 {
 	atomic_dec(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_return(atomic_long_t *v)
 {
 	return atomic_dec_return(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_return_acquire(atomic_long_t *v)
 {
 	return atomic_dec_return_acquire(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_return_release(atomic_long_t *v)
 {
 	return atomic_dec_return_release(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_return_relaxed(atomic_long_t *v)
 {
 	return atomic_dec_return_relaxed(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_dec(atomic_long_t *v)
 {
 	return atomic_fetch_dec(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_dec_acquire(atomic_long_t *v)
 {
 	return atomic_fetch_dec_acquire(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_dec_release(atomic_long_t *v)
 {
 	return atomic_fetch_dec_release(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_dec_relaxed(atomic_long_t *v)
 {
 	return atomic_fetch_dec_relaxed(v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_and(long i, atomic_long_t *v)
 {
 	atomic_and(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_and(long i, atomic_long_t *v)
 {
 	return atomic_fetch_and(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_and_acquire(long i, atomic_long_t *v)
 {
 	return atomic_fetch_and_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_and_release(long i, atomic_long_t *v)
 {
 	return atomic_fetch_and_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_and_relaxed(long i, atomic_long_t *v)
 {
 	return atomic_fetch_and_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_andnot(long i, atomic_long_t *v)
 {
 	atomic_andnot(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_andnot(long i, atomic_long_t *v)
 {
 	return atomic_fetch_andnot(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_andnot_acquire(long i, atomic_long_t *v)
 {
 	return atomic_fetch_andnot_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_andnot_release(long i, atomic_long_t *v)
 {
 	return atomic_fetch_andnot_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_andnot_relaxed(long i, atomic_long_t *v)
 {
 	return atomic_fetch_andnot_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_or(long i, atomic_long_t *v)
 {
 	atomic_or(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_or(long i, atomic_long_t *v)
 {
 	return atomic_fetch_or(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_or_acquire(long i, atomic_long_t *v)
 {
 	return atomic_fetch_or_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_or_release(long i, atomic_long_t *v)
 {
 	return atomic_fetch_or_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_or_relaxed(long i, atomic_long_t *v)
 {
 	return atomic_fetch_or_relaxed(i, v);
 }
 
-static inline void
+static __always_inline void
 atomic_long_xor(long i, atomic_long_t *v)
 {
 	atomic_xor(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_xor(long i, atomic_long_t *v)
 {
 	return atomic_fetch_xor(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_xor_acquire(long i, atomic_long_t *v)
 {
 	return atomic_fetch_xor_acquire(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_xor_release(long i, atomic_long_t *v)
 {
 	return atomic_fetch_xor_release(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_xor_relaxed(long i, atomic_long_t *v)
 {
 	return atomic_fetch_xor_relaxed(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_xchg(atomic_long_t *v, long i)
 {
 	return atomic_xchg(v, i);
 }
 
-static inline long
+static __always_inline long
 atomic_long_xchg_acquire(atomic_long_t *v, long i)
 {
 	return atomic_xchg_acquire(v, i);
 }
 
-static inline long
+static __always_inline long
 atomic_long_xchg_release(atomic_long_t *v, long i)
 {
 	return atomic_xchg_release(v, i);
 }
 
-static inline long
+static __always_inline long
 atomic_long_xchg_relaxed(atomic_long_t *v, long i)
 {
 	return atomic_xchg_relaxed(v, i);
 }
 
-static inline long
+static __always_inline long
 atomic_long_cmpxchg(atomic_long_t *v, long old, long new)
 {
 	return atomic_cmpxchg(v, old, new);
 }
 
-static inline long
+static __always_inline long
 atomic_long_cmpxchg_acquire(atomic_long_t *v, long old, long new)
 {
 	return atomic_cmpxchg_acquire(v, old, new);
 }
 
-static inline long
+static __always_inline long
 atomic_long_cmpxchg_release(atomic_long_t *v, long old, long new)
 {
 	return atomic_cmpxchg_release(v, old, new);
 }
 
-static inline long
+static __always_inline long
 atomic_long_cmpxchg_relaxed(atomic_long_t *v, long old, long new)
 {
 	return atomic_cmpxchg_relaxed(v, old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_try_cmpxchg(atomic_long_t *v, long *old, long new)
 {
 	return atomic_try_cmpxchg(v, (int *)old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_try_cmpxchg_acquire(atomic_long_t *v, long *old, long new)
 {
 	return atomic_try_cmpxchg_acquire(v, (int *)old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_try_cmpxchg_release(atomic_long_t *v, long *old, long new)
 {
 	return atomic_try_cmpxchg_release(v, (int *)old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_try_cmpxchg_relaxed(atomic_long_t *v, long *old, long new)
 {
 	return atomic_try_cmpxchg_relaxed(v, (int *)old, new);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_sub_and_test(long i, atomic_long_t *v)
 {
 	return atomic_sub_and_test(i, v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_dec_and_test(atomic_long_t *v)
 {
 	return atomic_dec_and_test(v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_inc_and_test(atomic_long_t *v)
 {
 	return atomic_inc_and_test(v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_add_negative(long i, atomic_long_t *v)
 {
 	return atomic_add_negative(i, v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_fetch_add_unless(atomic_long_t *v, long a, long u)
 {
 	return atomic_fetch_add_unless(v, a, u);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_add_unless(atomic_long_t *v, long a, long u)
 {
 	return atomic_add_unless(v, a, u);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_inc_not_zero(atomic_long_t *v)
 {
 	return atomic_inc_not_zero(v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_inc_unless_negative(atomic_long_t *v)
 {
 	return atomic_inc_unless_negative(v);
 }
 
-static inline bool
+static __always_inline bool
 atomic_long_dec_unless_positive(atomic_long_t *v)
 {
 	return atomic_dec_unless_positive(v);
 }
 
-static inline long
+static __always_inline long
 atomic_long_dec_if_positive(atomic_long_t *v)
 {
 	return atomic_dec_if_positive(v);
@@ -1010,4 +1011,4 @@ atomic_long_dec_if_positive(atomic_long_t *v)
 
 #endif /* CONFIG_64BIT */
 #endif /* _ASM_GENERIC_ATOMIC_LONG_H */
-// 77558968132ce4f911ad53f6f52ce423006f6268
+// a624200981f552b2c6be4f32fe44da8289f30d87
diff --git a/include/asm-generic/bitops/instrumented-atomic.h b/include/asm-generic/bitops/instrumented-atomic.h
index 18ce3c9e8eec..fb2cb33a4013 100644
--- a/include/asm-generic/bitops/instrumented-atomic.h
+++ b/include/asm-generic/bitops/instrumented-atomic.h
@@ -11,7 +11,7 @@
 #ifndef _ASM_GENERIC_BITOPS_INSTRUMENTED_ATOMIC_H
 #define _ASM_GENERIC_BITOPS_INSTRUMENTED_ATOMIC_H
 
-#include <linux/kasan-checks.h>
+#include <linux/instrumented.h>
 
 /**
  * set_bit - Atomically set a bit in memory
@@ -25,7 +25,7 @@
  */
 static inline void set_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_write(addr + BIT_WORD(nr), sizeof(long));
 	arch_set_bit(nr, addr);
 }
 
@@ -38,7 +38,7 @@ static inline void set_bit(long nr, volatile unsigned long *addr)
  */
 static inline void clear_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_write(addr + BIT_WORD(nr), sizeof(long));
 	arch_clear_bit(nr, addr);
 }
 
@@ -54,7 +54,7 @@ static inline void clear_bit(long nr, volatile unsigned long *addr)
  */
 static inline void change_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_write(addr + BIT_WORD(nr), sizeof(long));
 	arch_change_bit(nr, addr);
 }
 
@@ -67,7 +67,7 @@ static inline void change_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool test_and_set_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_write(addr + BIT_WORD(nr), sizeof(long));
 	return arch_test_and_set_bit(nr, addr);
 }
 
@@ -80,7 +80,7 @@ static inline bool test_and_set_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_write(addr + BIT_WORD(nr), sizeof(long));
 	return arch_test_and_clear_bit(nr, addr);
 }
 
@@ -93,7 +93,7 @@ static inline bool test_and_clear_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool test_and_change_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_write(addr + BIT_WORD(nr), sizeof(long));
 	return arch_test_and_change_bit(nr, addr);
 }
 
diff --git a/include/asm-generic/bitops/instrumented-lock.h b/include/asm-generic/bitops/instrumented-lock.h
index ec53fdeea9ec..b9bec468ae03 100644
--- a/include/asm-generic/bitops/instrumented-lock.h
+++ b/include/asm-generic/bitops/instrumented-lock.h
@@ -11,7 +11,7 @@
 #ifndef _ASM_GENERIC_BITOPS_INSTRUMENTED_LOCK_H
 #define _ASM_GENERIC_BITOPS_INSTRUMENTED_LOCK_H
 
-#include <linux/kasan-checks.h>
+#include <linux/instrumented.h>
 
 /**
  * clear_bit_unlock - Clear a bit in memory, for unlock
@@ -22,7 +22,7 @@
  */
 static inline void clear_bit_unlock(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_write(addr + BIT_WORD(nr), sizeof(long));
 	arch_clear_bit_unlock(nr, addr);
 }
 
@@ -37,7 +37,7 @@ static inline void clear_bit_unlock(long nr, volatile unsigned long *addr)
  */
 static inline void __clear_bit_unlock(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_write(addr + BIT_WORD(nr), sizeof(long));
 	arch___clear_bit_unlock(nr, addr);
 }
 
@@ -52,7 +52,7 @@ static inline void __clear_bit_unlock(long nr, volatile unsigned long *addr)
  */
 static inline bool test_and_set_bit_lock(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_write(addr + BIT_WORD(nr), sizeof(long));
 	return arch_test_and_set_bit_lock(nr, addr);
 }
 
@@ -71,7 +71,7 @@ static inline bool test_and_set_bit_lock(long nr, volatile unsigned long *addr)
 static inline bool
 clear_bit_unlock_is_negative_byte(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_write(addr + BIT_WORD(nr), sizeof(long));
 	return arch_clear_bit_unlock_is_negative_byte(nr, addr);
 }
 /* Let everybody know we have it. */
diff --git a/include/asm-generic/bitops/instrumented-non-atomic.h b/include/asm-generic/bitops/instrumented-non-atomic.h
index 95ff28d128a1..20f788a25ef9 100644
--- a/include/asm-generic/bitops/instrumented-non-atomic.h
+++ b/include/asm-generic/bitops/instrumented-non-atomic.h
@@ -11,7 +11,7 @@
 #ifndef _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H
 #define _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H
 
-#include <linux/kasan-checks.h>
+#include <linux/instrumented.h>
 
 /**
  * __set_bit - Set a bit in memory
@@ -24,7 +24,7 @@
  */
 static inline void __set_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_write(addr + BIT_WORD(nr), sizeof(long));
 	arch___set_bit(nr, addr);
 }
 
@@ -39,7 +39,7 @@ static inline void __set_bit(long nr, volatile unsigned long *addr)
  */
 static inline void __clear_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_write(addr + BIT_WORD(nr), sizeof(long));
 	arch___clear_bit(nr, addr);
 }
 
@@ -54,7 +54,7 @@ static inline void __clear_bit(long nr, volatile unsigned long *addr)
  */
 static inline void __change_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_write(addr + BIT_WORD(nr), sizeof(long));
 	arch___change_bit(nr, addr);
 }
 
@@ -68,7 +68,7 @@ static inline void __change_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool __test_and_set_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_write(addr + BIT_WORD(nr), sizeof(long));
 	return arch___test_and_set_bit(nr, addr);
 }
 
@@ -82,7 +82,7 @@ static inline bool __test_and_set_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool __test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_write(addr + BIT_WORD(nr), sizeof(long));
 	return arch___test_and_clear_bit(nr, addr);
 }
 
@@ -96,7 +96,7 @@ static inline bool __test_and_clear_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool __test_and_change_bit(long nr, volatile unsigned long *addr)
 {
-	kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+	instrument_write(addr + BIT_WORD(nr), sizeof(long));
 	return arch___test_and_change_bit(nr, addr);
 }
 
@@ -107,7 +107,7 @@ static inline bool __test_and_change_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool test_bit(long nr, const volatile unsigned long *addr)
 {
-	kasan_check_read(addr + BIT_WORD(nr), sizeof(long));
+	instrument_atomic_read(addr + BIT_WORD(nr), sizeof(long));
 	return arch_test_bit(nr, addr);
 }
 
diff --git a/include/asm-generic/hyperv-tlfs.h b/include/asm-generic/hyperv-tlfs.h
new file mode 100644
index 000000000000..262fae9526b1
--- /dev/null
+++ b/include/asm-generic/hyperv-tlfs.h
@@ -0,0 +1,493 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * This file contains definitions from Hyper-V Hypervisor Top-Level Functional
+ * Specification (TLFS):
+ * https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
+ */
+
+#ifndef _ASM_GENERIC_HYPERV_TLFS_H
+#define _ASM_GENERIC_HYPERV_TLFS_H
+
+#include <linux/types.h>
+#include <linux/bits.h>
+#include <linux/time64.h>
+
+/*
+ * While not explicitly listed in the TLFS, Hyper-V always runs with a page size
+ * of 4096. These definitions are used when communicating with Hyper-V using
+ * guest physical pages and guest physical page addresses, since the guest page
+ * size may not be 4096 on all architectures.
+ */
+#define HV_HYP_PAGE_SHIFT      12
+#define HV_HYP_PAGE_SIZE       BIT(HV_HYP_PAGE_SHIFT)
+#define HV_HYP_PAGE_MASK       (~(HV_HYP_PAGE_SIZE - 1))
+
+/*
+ * Hyper-V provides two categories of flags relevant to guest VMs.  The
+ * "Features" category indicates specific functionality that is available
+ * to guests on this particular instance of Hyper-V. The "Features"
+ * are presented in four groups, each of which is 32 bits. The group A
+ * and B definitions are common across architectures and are listed here.
+ * However, not all flags are relevant on all architectures.
+ *
+ * Groups C and D vary across architectures and are listed in the
+ * architecture specific portion of hyperv-tlfs.h. Some of these flags exist
+ * on multiple architectures, but the bit positions are different so they
+ * cannot appear in the generic portion of hyperv-tlfs.h.
+ *
+ * The "Enlightenments" category provides recommendations on whether to use
+ * specific enlightenments that are available. The Enlighenments are a single
+ * group of 32 bits, but they vary across architectures and are listed in
+ * the architecture specific portion of hyperv-tlfs.h.
+ */
+
+/*
+ * Group A Features.
+ */
+
+/* VP Runtime register available */
+#define HV_MSR_VP_RUNTIME_AVAILABLE		BIT(0)
+/* Partition Reference Counter available*/
+#define HV_MSR_TIME_REF_COUNT_AVAILABLE		BIT(1)
+/* Basic SynIC register available */
+#define HV_MSR_SYNIC_AVAILABLE			BIT(2)
+/* Synthetic Timer registers available */
+#define HV_MSR_SYNTIMER_AVAILABLE		BIT(3)
+/* Virtual APIC assist and VP assist page registers available */
+#define HV_MSR_APIC_ACCESS_AVAILABLE		BIT(4)
+/* Hypercall and Guest OS ID registers available*/
+#define HV_MSR_HYPERCALL_AVAILABLE		BIT(5)
+/* Access virtual processor index register available*/
+#define HV_MSR_VP_INDEX_AVAILABLE		BIT(6)
+/* Virtual system reset register available*/
+#define HV_MSR_RESET_AVAILABLE			BIT(7)
+/* Access statistics page registers available */
+#define HV_MSR_STAT_PAGES_AVAILABLE		BIT(8)
+/* Partition reference TSC register is available */
+#define HV_MSR_REFERENCE_TSC_AVAILABLE		BIT(9)
+/* Partition Guest IDLE register is available */
+#define HV_MSR_GUEST_IDLE_AVAILABLE		BIT(10)
+/* Partition local APIC and TSC frequency registers available */
+#define HV_ACCESS_FREQUENCY_MSRS		BIT(11)
+/* AccessReenlightenmentControls privilege */
+#define HV_ACCESS_REENLIGHTENMENT		BIT(13)
+/* AccessTscInvariantControls privilege */
+#define HV_ACCESS_TSC_INVARIANT			BIT(15)
+
+/*
+ * Group B features.
+ */
+#define HV_CREATE_PARTITIONS			BIT(0)
+#define HV_ACCESS_PARTITION_ID			BIT(1)
+#define HV_ACCESS_MEMORY_POOL			BIT(2)
+#define HV_ADJUST_MESSAGE_BUFFERS		BIT(3)
+#define HV_POST_MESSAGES			BIT(4)
+#define HV_SIGNAL_EVENTS			BIT(5)
+#define HV_CREATE_PORT				BIT(6)
+#define HV_CONNECT_PORT				BIT(7)
+#define HV_ACCESS_STATS				BIT(8)
+#define HV_DEBUGGING				BIT(11)
+#define HV_CPU_POWER_MANAGEMENT			BIT(12)
+
+
+/*
+ * TSC page layout.
+ */
+struct ms_hyperv_tsc_page {
+	volatile u32 tsc_sequence;
+	u32 reserved1;
+	volatile u64 tsc_scale;
+	volatile s64 tsc_offset;
+} __packed;
+
+/*
+ * The guest OS needs to register the guest ID with the hypervisor.
+ * The guest ID is a 64 bit entity and the structure of this ID is
+ * specified in the Hyper-V specification:
+ *
+ * msdn.microsoft.com/en-us/library/windows/hardware/ff542653%28v=vs.85%29.aspx
+ *
+ * While the current guideline does not specify how Linux guest ID(s)
+ * need to be generated, our plan is to publish the guidelines for
+ * Linux and other guest operating systems that currently are hosted
+ * on Hyper-V. The implementation here conforms to this yet
+ * unpublished guidelines.
+ *
+ *
+ * Bit(s)
+ * 63 - Indicates if the OS is Open Source or not; 1 is Open Source
+ * 62:56 - Os Type; Linux is 0x100
+ * 55:48 - Distro specific identification
+ * 47:16 - Linux kernel version number
+ * 15:0  - Distro specific identification
+ *
+ *
+ */
+
+#define HV_LINUX_VENDOR_ID              0x8100
+
+/*
+ * Crash notification flags.
+ */
+#define HV_CRASH_CTL_CRASH_NOTIFY_MSG		BIT_ULL(62)
+#define HV_CRASH_CTL_CRASH_NOTIFY		BIT_ULL(63)
+
+/* Declare the various hypercall operations. */
+#define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE	0x0002
+#define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST	0x0003
+#define HVCALL_NOTIFY_LONG_SPIN_WAIT		0x0008
+#define HVCALL_SEND_IPI				0x000b
+#define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX	0x0013
+#define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX	0x0014
+#define HVCALL_SEND_IPI_EX			0x0015
+#define HVCALL_GET_VP_REGISTERS			0x0050
+#define HVCALL_SET_VP_REGISTERS			0x0051
+#define HVCALL_POST_MESSAGE			0x005c
+#define HVCALL_SIGNAL_EVENT			0x005d
+#define HVCALL_RETARGET_INTERRUPT		0x007e
+#define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE 0x00af
+#define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_LIST 0x00b0
+
+#define HV_FLUSH_ALL_PROCESSORS			BIT(0)
+#define HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES	BIT(1)
+#define HV_FLUSH_NON_GLOBAL_MAPPINGS_ONLY	BIT(2)
+#define HV_FLUSH_USE_EXTENDED_RANGE_FORMAT	BIT(3)
+
+enum HV_GENERIC_SET_FORMAT {
+	HV_GENERIC_SET_SPARSE_4K,
+	HV_GENERIC_SET_ALL,
+};
+
+#define HV_PARTITION_ID_SELF		((u64)-1)
+#define HV_VP_INDEX_SELF		((u32)-2)
+
+#define HV_HYPERCALL_RESULT_MASK	GENMASK_ULL(15, 0)
+#define HV_HYPERCALL_FAST_BIT		BIT(16)
+#define HV_HYPERCALL_VARHEAD_OFFSET	17
+#define HV_HYPERCALL_REP_COMP_OFFSET	32
+#define HV_HYPERCALL_REP_COMP_1		BIT_ULL(32)
+#define HV_HYPERCALL_REP_COMP_MASK	GENMASK_ULL(43, 32)
+#define HV_HYPERCALL_REP_START_OFFSET	48
+#define HV_HYPERCALL_REP_START_MASK	GENMASK_ULL(59, 48)
+
+/* hypercall status code */
+#define HV_STATUS_SUCCESS			0
+#define HV_STATUS_INVALID_HYPERCALL_CODE	2
+#define HV_STATUS_INVALID_HYPERCALL_INPUT	3
+#define HV_STATUS_INVALID_ALIGNMENT		4
+#define HV_STATUS_INVALID_PARAMETER		5
+#define HV_STATUS_INSUFFICIENT_MEMORY		11
+#define HV_STATUS_INVALID_PORT_ID		17
+#define HV_STATUS_INVALID_CONNECTION_ID		18
+#define HV_STATUS_INSUFFICIENT_BUFFERS		19
+
+/*
+ * The Hyper-V TimeRefCount register and the TSC
+ * page provide a guest VM clock with 100ns tick rate
+ */
+#define HV_CLOCK_HZ (NSEC_PER_SEC/100)
+
+/* Define the number of synthetic interrupt sources. */
+#define HV_SYNIC_SINT_COUNT		(16)
+/* Define the expected SynIC version. */
+#define HV_SYNIC_VERSION_1		(0x1)
+/* Valid SynIC vectors are 16-255. */
+#define HV_SYNIC_FIRST_VALID_VECTOR	(16)
+
+#define HV_SYNIC_CONTROL_ENABLE		(1ULL << 0)
+#define HV_SYNIC_SIMP_ENABLE		(1ULL << 0)
+#define HV_SYNIC_SIEFP_ENABLE		(1ULL << 0)
+#define HV_SYNIC_SINT_MASKED		(1ULL << 16)
+#define HV_SYNIC_SINT_AUTO_EOI		(1ULL << 17)
+#define HV_SYNIC_SINT_VECTOR_MASK	(0xFF)
+
+#define HV_SYNIC_STIMER_COUNT		(4)
+
+/* Define synthetic interrupt controller message constants. */
+#define HV_MESSAGE_SIZE			(256)
+#define HV_MESSAGE_PAYLOAD_BYTE_COUNT	(240)
+#define HV_MESSAGE_PAYLOAD_QWORD_COUNT	(30)
+
+/* Define synthetic interrupt controller message flags. */
+union hv_message_flags {
+	__u8 asu8;
+	struct {
+		__u8 msg_pending:1;
+		__u8 reserved:7;
+	} __packed;
+};
+
+/* Define port identifier type. */
+union hv_port_id {
+	__u32 asu32;
+	struct {
+		__u32 id:24;
+		__u32 reserved:8;
+	} __packed u;
+};
+
+/* Define synthetic interrupt controller message header. */
+struct hv_message_header {
+	__u32 message_type;
+	__u8 payload_size;
+	union hv_message_flags message_flags;
+	__u8 reserved[2];
+	union {
+		__u64 sender;
+		union hv_port_id port;
+	};
+} __packed;
+
+/* Define synthetic interrupt controller message format. */
+struct hv_message {
+	struct hv_message_header header;
+	union {
+		__u64 payload[HV_MESSAGE_PAYLOAD_QWORD_COUNT];
+	} u;
+} __packed;
+
+/* Define the synthetic interrupt message page layout. */
+struct hv_message_page {
+	struct hv_message sint_message[HV_SYNIC_SINT_COUNT];
+} __packed;
+
+/* Define timer message payload structure. */
+struct hv_timer_message_payload {
+	__u32 timer_index;
+	__u32 reserved;
+	__u64 expiration_time;	/* When the timer expired */
+	__u64 delivery_time;	/* When the message was delivered */
+} __packed;
+
+
+/* Define synthetic interrupt controller flag constants. */
+#define HV_EVENT_FLAGS_COUNT		(256 * 8)
+#define HV_EVENT_FLAGS_LONG_COUNT	(256 / sizeof(unsigned long))
+
+/*
+ * Synthetic timer configuration.
+ */
+union hv_stimer_config {
+	u64 as_uint64;
+	struct {
+		u64 enable:1;
+		u64 periodic:1;
+		u64 lazy:1;
+		u64 auto_enable:1;
+		u64 apic_vector:8;
+		u64 direct_mode:1;
+		u64 reserved_z0:3;
+		u64 sintx:4;
+		u64 reserved_z1:44;
+	} __packed;
+};
+
+
+/* Define the synthetic interrupt controller event flags format. */
+union hv_synic_event_flags {
+	unsigned long flags[HV_EVENT_FLAGS_LONG_COUNT];
+};
+
+/* Define SynIC control register. */
+union hv_synic_scontrol {
+	u64 as_uint64;
+	struct {
+		u64 enable:1;
+		u64 reserved:63;
+	} __packed;
+};
+
+/* Define synthetic interrupt source. */
+union hv_synic_sint {
+	u64 as_uint64;
+	struct {
+		u64 vector:8;
+		u64 reserved1:8;
+		u64 masked:1;
+		u64 auto_eoi:1;
+		u64 polling:1;
+		u64 reserved2:45;
+	} __packed;
+};
+
+/* Define the format of the SIMP register */
+union hv_synic_simp {
+	u64 as_uint64;
+	struct {
+		u64 simp_enabled:1;
+		u64 preserved:11;
+		u64 base_simp_gpa:52;
+	} __packed;
+};
+
+/* Define the format of the SIEFP register */
+union hv_synic_siefp {
+	u64 as_uint64;
+	struct {
+		u64 siefp_enabled:1;
+		u64 preserved:11;
+		u64 base_siefp_gpa:52;
+	} __packed;
+};
+
+struct hv_vpset {
+	u64 format;
+	u64 valid_bank_mask;
+	u64 bank_contents[];
+} __packed;
+
+/* HvCallSendSyntheticClusterIpi hypercall */
+struct hv_send_ipi {
+	u32 vector;
+	u32 reserved;
+	u64 cpu_mask;
+} __packed;
+
+/* HvCallSendSyntheticClusterIpiEx hypercall */
+struct hv_send_ipi_ex {
+	u32 vector;
+	u32 reserved;
+	struct hv_vpset vp_set;
+} __packed;
+
+/* HvFlushGuestPhysicalAddressSpace hypercalls */
+struct hv_guest_mapping_flush {
+	u64 address_space;
+	u64 flags;
+} __packed;
+
+/*
+ *  HV_MAX_FLUSH_PAGES = "additional_pages" + 1. It's limited
+ *  by the bitwidth of "additional_pages" in union hv_gpa_page_range.
+ */
+#define HV_MAX_FLUSH_PAGES (2048)
+
+/* HvFlushGuestPhysicalAddressList hypercall */
+union hv_gpa_page_range {
+	u64 address_space;
+	struct {
+		u64 additional_pages:11;
+		u64 largepage:1;
+		u64 basepfn:52;
+	} page;
+};
+
+/*
+ * All input flush parameters should be in single page. The max flush
+ * count is equal with how many entries of union hv_gpa_page_range can
+ * be populated into the input parameter page.
+ */
+#define HV_MAX_FLUSH_REP_COUNT ((HV_HYP_PAGE_SIZE - 2 * sizeof(u64)) /	\
+				sizeof(union hv_gpa_page_range))
+
+struct hv_guest_mapping_flush_list {
+	u64 address_space;
+	u64 flags;
+	union hv_gpa_page_range gpa_list[HV_MAX_FLUSH_REP_COUNT];
+};
+
+/* HvFlushVirtualAddressSpace, HvFlushVirtualAddressList hypercalls */
+struct hv_tlb_flush {
+	u64 address_space;
+	u64 flags;
+	u64 processor_mask;
+	u64 gva_list[];
+} __packed;
+
+/* HvFlushVirtualAddressSpaceEx, HvFlushVirtualAddressListEx hypercalls */
+struct hv_tlb_flush_ex {
+	u64 address_space;
+	u64 flags;
+	struct hv_vpset hv_vp_set;
+	u64 gva_list[];
+} __packed;
+
+/* HvRetargetDeviceInterrupt hypercall */
+union hv_msi_entry {
+	u64 as_uint64;
+	struct {
+		u32 address;
+		u32 data;
+	} __packed;
+};
+
+struct hv_interrupt_entry {
+	u32 source;			/* 1 for MSI(-X) */
+	u32 reserved1;
+	union hv_msi_entry msi_entry;
+} __packed;
+
+/*
+ * flags for hv_device_interrupt_target.flags
+ */
+#define HV_DEVICE_INTERRUPT_TARGET_MULTICAST		1
+#define HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET	2
+
+struct hv_device_interrupt_target {
+	u32 vector;
+	u32 flags;
+	union {
+		u64 vp_mask;
+		struct hv_vpset vp_set;
+	};
+} __packed;
+
+struct hv_retarget_device_interrupt {
+	u64 partition_id;		/* use "self" */
+	u64 device_id;
+	struct hv_interrupt_entry int_entry;
+	u64 reserved2;
+	struct hv_device_interrupt_target int_target;
+} __packed __aligned(8);
+
+
+/* HvGetVpRegisters hypercall input with variable size reg name list*/
+struct hv_get_vp_registers_input {
+	struct {
+		u64 partitionid;
+		u32 vpindex;
+		u8  inputvtl;
+		u8  padding[3];
+	} header;
+	struct input {
+		u32 name0;
+		u32 name1;
+	} element[];
+} __packed;
+
+
+/* HvGetVpRegisters returns an array of these output elements */
+struct hv_get_vp_registers_output {
+	union {
+		struct {
+			u32 a;
+			u32 b;
+			u32 c;
+			u32 d;
+		} as32 __packed;
+		struct {
+			u64 low;
+			u64 high;
+		} as64 __packed;
+	};
+};
+
+/* HvSetVpRegisters hypercall with variable size reg name/value list*/
+struct hv_set_vp_registers_input {
+	struct {
+		u64 partitionid;
+		u32 vpindex;
+		u8  inputvtl;
+		u8  padding[3];
+	} header;
+	struct {
+		u32 name;
+		u32 padding1;
+		u64 padding2;
+		u64 valuelow;
+		u64 valuehigh;
+	} element[];
+} __packed;
+
+#endif
diff --git a/include/asm-generic/pgtable-nop4d-hack.h b/include/asm-generic/pgtable-nop4d-hack.h
deleted file mode 100644
index 829bdb0d6327..000000000000
--- a/include/asm-generic/pgtable-nop4d-hack.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _PGTABLE_NOP4D_HACK_H
-#define _PGTABLE_NOP4D_HACK_H
-
-#ifndef __ASSEMBLY__
-#include <asm-generic/5level-fixup.h>
-
-#define __PAGETABLE_PUD_FOLDED 1
-
-/*
- * Having the pud type consist of a pgd gets the size right, and allows
- * us to conceptually access the pgd entry that this pud is folded into
- * without casting.
- */
-typedef struct { pgd_t pgd; } pud_t;
-
-#define PUD_SHIFT	PGDIR_SHIFT
-#define PTRS_PER_PUD	1
-#define PUD_SIZE	(1UL << PUD_SHIFT)
-#define PUD_MASK	(~(PUD_SIZE-1))
-
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pud is never bad, and a pud always exists (as it's folded
- * into the pgd entry)
- */
-static inline int pgd_none(pgd_t pgd)		{ return 0; }
-static inline int pgd_bad(pgd_t pgd)		{ return 0; }
-static inline int pgd_present(pgd_t pgd)	{ return 1; }
-static inline void pgd_clear(pgd_t *pgd)	{ }
-#define pud_ERROR(pud)				(pgd_ERROR((pud).pgd))
-
-#define pgd_populate(mm, pgd, pud)		do { } while (0)
-#define pgd_populate_safe(mm, pgd, pud)		do { } while (0)
-/*
- * (puds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pgd(pgdptr, pgdval)	set_pud((pud_t *)(pgdptr), (pud_t) { pgdval })
-
-static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
-{
-	return (pud_t *)pgd;
-}
-
-#define pud_val(x)				(pgd_val((x).pgd))
-#define __pud(x)				((pud_t) { __pgd(x) })
-
-#define pgd_page(pgd)				(pud_page((pud_t){ pgd }))
-#define pgd_page_vaddr(pgd)			(pud_page_vaddr((pud_t){ pgd }))
-
-/*
- * allocating and freeing a pud is trivial: the 1-entry pud is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pud_alloc_one(mm, address)		NULL
-#define pud_free(mm, x)				do { } while (0)
-#define __pud_free_tlb(tlb, x, a)		do { } while (0)
-
-#undef  pud_addr_end
-#define pud_addr_end(addr, end)			(end)
-
-#endif /* __ASSEMBLY__ */
-#endif /* _PGTABLE_NOP4D_HACK_H */
diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h
index d3776cb494c0..ad05c1684bfc 100644
--- a/include/asm-generic/pgtable-nopud.h
+++ b/include/asm-generic/pgtable-nopud.h
@@ -4,9 +4,6 @@
 
 #ifndef __ASSEMBLY__
 
-#ifdef __ARCH_USE_5LEVEL_HACK
-#include <asm-generic/pgtable-nop4d-hack.h>
-#else
 #include <asm-generic/pgtable-nop4d.h>
 
 #define __PAGETABLE_PUD_FOLDED 1
@@ -65,5 +62,4 @@ static inline pud_t *pud_offset(p4d_t *p4d, unsigned long address)
 #define pud_addr_end(addr, end)			(end)
 
 #endif /* __ASSEMBLY__ */
-#endif /* !__ARCH_USE_5LEVEL_HACK */
 #endif /* _PGTABLE_NOPUD_H */
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 329b8c8ca703..8c5f9c29698b 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -491,6 +491,10 @@ static inline int arch_unmap_one(struct mm_struct *mm,
 #define flush_tlb_fix_spurious_fault(vma, address) flush_tlb_page(vma, address)
 #endif
 
+#ifndef pgprot_nx
+#define pgprot_nx(prot)	(prot)
+#endif
+
 #ifndef pgprot_noncached
 #define pgprot_noncached(prot)	(prot)
 #endif
diff --git a/include/crypto/drbg.h b/include/crypto/drbg.h
index 8c9af21efce1..c4165126937e 100644
--- a/include/crypto/drbg.h
+++ b/include/crypto/drbg.h
@@ -184,11 +184,7 @@ static inline size_t drbg_max_addtl(struct drbg_state *drbg)
 static inline size_t drbg_max_requests(struct drbg_state *drbg)
 {
 	/* SP800-90A requires 2**48 maximum requests before reseeding */
-#if (__BITS_PER_LONG == 32)
-	return SIZE_MAX;
-#else
-	return (1UL<<48);
-#endif
+	return (1<<20);
 }
 
 /*
diff --git a/include/drm/drm_client.h b/include/drm/drm_client.h
index 3ed5dee899fd..7402f852d3c4 100644
--- a/include/drm/drm_client.h
+++ b/include/drm/drm_client.h
@@ -188,6 +188,6 @@ int drm_client_modeset_dpms(struct drm_client_dev *client, int mode);
 	drm_for_each_connector_iter(connector, iter) \
 		if (connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK)
 
-int drm_client_debugfs_init(struct drm_minor *minor);
+void drm_client_debugfs_init(struct drm_minor *minor);
 
 #endif
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 19ae6bb5c85b..fd543d1db9b2 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1617,9 +1617,9 @@ struct drm_tile_group {
 };
 
 struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
-						  char topology[8]);
+						  const char topology[8]);
 struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
-					       char topology[8]);
+					       const char topology[8]);
 void drm_mode_put_tile_group(struct drm_device *dev,
 			     struct drm_tile_group *tg);
 
diff --git a/include/drm/drm_debugfs.h b/include/drm/drm_debugfs.h
index 7501e323d383..2188dc83957f 100644
--- a/include/drm/drm_debugfs.h
+++ b/include/drm/drm_debugfs.h
@@ -80,18 +80,16 @@ struct drm_info_node {
 };
 
 #if defined(CONFIG_DEBUG_FS)
-int drm_debugfs_create_files(const struct drm_info_list *files,
-			     int count, struct dentry *root,
-			     struct drm_minor *minor);
+void drm_debugfs_create_files(const struct drm_info_list *files,
+			      int count, struct dentry *root,
+			      struct drm_minor *minor);
 int drm_debugfs_remove_files(const struct drm_info_list *files,
 			     int count, struct drm_minor *minor);
 #else
-static inline int drm_debugfs_create_files(const struct drm_info_list *files,
-					   int count, struct dentry *root,
-					   struct drm_minor *minor)
-{
-	return 0;
-}
+static inline void drm_debugfs_create_files(const struct drm_info_list *files,
+					    int count, struct dentry *root,
+					    struct drm_minor *minor)
+{}
 
 static inline int drm_debugfs_remove_files(const struct drm_info_list *files,
 					   int count, struct drm_minor *minor)
diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h
index bb60a949f416..a55874db9dd4 100644
--- a/include/drm/drm_device.h
+++ b/include/drm/drm_device.h
@@ -67,15 +67,33 @@ struct drm_device {
 	/** @dev: Device structure of bus-device */
 	struct device *dev;
 
+	/**
+	 * @managed:
+	 *
+	 * Managed resources linked to the lifetime of this &drm_device as
+	 * tracked by @ref.
+	 */
+	struct {
+		/** @managed.resources: managed resources list */
+		struct list_head resources;
+		/** @managed.final_kfree: pointer for final kfree() call */
+		void *final_kfree;
+		/** @managed.lock: protects @managed.resources */
+		spinlock_t lock;
+	} managed;
+
 	/** @driver: DRM driver managing the device */
 	struct drm_driver *driver;
 
 	/**
 	 * @dev_private:
 	 *
-	 * DRM driver private data. Instead of using this pointer it is
-	 * recommended that drivers use drm_dev_init() and embed struct
-	 * &drm_device in their larger per-device structure.
+	 * DRM driver private data. This is deprecated and should be left set to
+	 * NULL.
+	 *
+	 * Instead of using this pointer it is recommended that drivers use
+	 * drm_dev_init() and embed struct &drm_device in their larger
+	 * per-device structure.
 	 */
 	void *dev_private;
 
diff --git a/include/drm/drm_displayid.h b/include/drm/drm_displayid.h
index 9d3b745c3107..77941efb5426 100644
--- a/include/drm/drm_displayid.h
+++ b/include/drm/drm_displayid.h
@@ -89,7 +89,7 @@ struct displayid_detailed_timings_1 {
 
 struct displayid_detailed_timing_block {
 	struct displayid_block base;
-	struct displayid_detailed_timings_1 timings[0];
+	struct displayid_detailed_timings_1 timings[];
 };
 
 #define for_each_displayid_db(displayid, block, idx, length) \
@@ -97,7 +97,7 @@ struct displayid_detailed_timing_block {
 	     (idx) + sizeof(struct displayid_block) <= (length) && \
 	     (idx) + sizeof(struct displayid_block) + (block)->num_bytes <= (length) && \
 	     (block)->num_bytes > 0; \
-	     (idx) += (block)->num_bytes + sizeof(struct displayid_block), \
+	     (idx) += sizeof(struct displayid_block) + (block)->num_bytes, \
 	     (block) = (struct displayid_block *)&(displayid)[idx])
 
 #endif
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index c6119e4c169a..3beb2aac8c4c 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -701,7 +701,16 @@
 # define DP_TEST_CRC_SUPPORTED		    (1 << 5)
 # define DP_TEST_COUNT_MASK		    0xf
 
-#define DP_TEST_PHY_PATTERN                 0x248
+#define DP_PHY_TEST_PATTERN                 0x248
+# define DP_PHY_TEST_PATTERN_SEL_MASK       0x7
+# define DP_PHY_TEST_PATTERN_NONE           0x0
+# define DP_PHY_TEST_PATTERN_D10_2          0x1
+# define DP_PHY_TEST_PATTERN_ERROR_COUNT    0x2
+# define DP_PHY_TEST_PATTERN_PRBS7          0x3
+# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM   0x4
+# define DP_PHY_TEST_PATTERN_CP2520         0x5
+
+#define DP_TEST_HBR2_SCRAMBLER_RESET        0x24A
 #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0    0x250
 #define	DP_TEST_80BIT_CUSTOM_PATTERN_15_8   0x251
 #define	DP_TEST_80BIT_CUSTOM_PATTERN_23_16  0x252
@@ -1209,6 +1218,136 @@ struct dp_sdp {
 #define EDP_VSC_PSR_UPDATE_RFB		(1<<1)
 #define EDP_VSC_PSR_CRC_VALUES_VALID	(1<<2)
 
+/**
+ * enum dp_pixelformat - drm DP Pixel encoding formats
+ *
+ * This enum is used to indicate DP VSC SDP Pixel encoding formats.
+ * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through
+ * DB18]
+ *
+ * @DP_PIXELFORMAT_RGB: RGB pixel encoding format
+ * @DP_PIXELFORMAT_YUV444: YCbCr 4:4:4 pixel encoding format
+ * @DP_PIXELFORMAT_YUV422: YCbCr 4:2:2 pixel encoding format
+ * @DP_PIXELFORMAT_YUV420: YCbCr 4:2:0 pixel encoding format
+ * @DP_PIXELFORMAT_Y_ONLY: Y Only pixel encoding format
+ * @DP_PIXELFORMAT_RAW: RAW pixel encoding format
+ * @DP_PIXELFORMAT_RESERVED: Reserved pixel encoding format
+ */
+enum dp_pixelformat {
+	DP_PIXELFORMAT_RGB = 0,
+	DP_PIXELFORMAT_YUV444 = 0x1,
+	DP_PIXELFORMAT_YUV422 = 0x2,
+	DP_PIXELFORMAT_YUV420 = 0x3,
+	DP_PIXELFORMAT_Y_ONLY = 0x4,
+	DP_PIXELFORMAT_RAW = 0x5,
+	DP_PIXELFORMAT_RESERVED = 0x6,
+};
+
+/**
+ * enum dp_colorimetry - drm DP Colorimetry formats
+ *
+ * This enum is used to indicate DP VSC SDP Colorimetry formats.
+ * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through
+ * DB18] and a name of enum member follows DRM_MODE_COLORIMETRY definition.
+ *
+ * @DP_COLORIMETRY_DEFAULT: sRGB (IEC 61966-2-1) or
+ *                          ITU-R BT.601 colorimetry format
+ * @DP_COLORIMETRY_RGB_WIDE_FIXED: RGB wide gamut fixed point colorimetry format
+ * @DP_COLORIMETRY_BT709_YCC: ITU-R BT.709 colorimetry format
+ * @DP_COLORIMETRY_RGB_WIDE_FLOAT: RGB wide gamut floating point
+ *                                 (scRGB (IEC 61966-2-2)) colorimetry format
+ * @DP_COLORIMETRY_XVYCC_601: xvYCC601 colorimetry format
+ * @DP_COLORIMETRY_OPRGB: OpRGB colorimetry format
+ * @DP_COLORIMETRY_XVYCC_709: xvYCC709 colorimetry format
+ * @DP_COLORIMETRY_DCI_P3_RGB: DCI-P3 (SMPTE RP 431-2) colorimetry format
+ * @DP_COLORIMETRY_SYCC_601: sYCC601 colorimetry format
+ * @DP_COLORIMETRY_RGB_CUSTOM: RGB Custom Color Profile colorimetry format
+ * @DP_COLORIMETRY_OPYCC_601: opYCC601 colorimetry format
+ * @DP_COLORIMETRY_BT2020_RGB: ITU-R BT.2020 R' G' B' colorimetry format
+ * @DP_COLORIMETRY_BT2020_CYCC: ITU-R BT.2020 Y'c C'bc C'rc colorimetry format
+ * @DP_COLORIMETRY_BT2020_YCC: ITU-R BT.2020 Y' C'b C'r colorimetry format
+ */
+enum dp_colorimetry {
+	DP_COLORIMETRY_DEFAULT = 0,
+	DP_COLORIMETRY_RGB_WIDE_FIXED = 0x1,
+	DP_COLORIMETRY_BT709_YCC = 0x1,
+	DP_COLORIMETRY_RGB_WIDE_FLOAT = 0x2,
+	DP_COLORIMETRY_XVYCC_601 = 0x2,
+	DP_COLORIMETRY_OPRGB = 0x3,
+	DP_COLORIMETRY_XVYCC_709 = 0x3,
+	DP_COLORIMETRY_DCI_P3_RGB = 0x4,
+	DP_COLORIMETRY_SYCC_601 = 0x4,
+	DP_COLORIMETRY_RGB_CUSTOM = 0x5,
+	DP_COLORIMETRY_OPYCC_601 = 0x5,
+	DP_COLORIMETRY_BT2020_RGB = 0x6,
+	DP_COLORIMETRY_BT2020_CYCC = 0x6,
+	DP_COLORIMETRY_BT2020_YCC = 0x7,
+};
+
+/**
+ * enum dp_dynamic_range - drm DP Dynamic Range
+ *
+ * This enum is used to indicate DP VSC SDP Dynamic Range.
+ * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through
+ * DB18]
+ *
+ * @DP_DYNAMIC_RANGE_VESA: VESA range
+ * @DP_DYNAMIC_RANGE_CTA: CTA range
+ */
+enum dp_dynamic_range {
+	DP_DYNAMIC_RANGE_VESA = 0,
+	DP_DYNAMIC_RANGE_CTA = 1,
+};
+
+/**
+ * enum dp_content_type - drm DP Content Type
+ *
+ * This enum is used to indicate DP VSC SDP Content Types.
+ * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through
+ * DB18]
+ * CTA-861-G defines content types and expected processing by a sink device
+ *
+ * @DP_CONTENT_TYPE_NOT_DEFINED: Not defined type
+ * @DP_CONTENT_TYPE_GRAPHICS: Graphics type
+ * @DP_CONTENT_TYPE_PHOTO: Photo type
+ * @DP_CONTENT_TYPE_VIDEO: Video type
+ * @DP_CONTENT_TYPE_GAME: Game type
+ */
+enum dp_content_type {
+	DP_CONTENT_TYPE_NOT_DEFINED = 0x00,
+	DP_CONTENT_TYPE_GRAPHICS = 0x01,
+	DP_CONTENT_TYPE_PHOTO = 0x02,
+	DP_CONTENT_TYPE_VIDEO = 0x03,
+	DP_CONTENT_TYPE_GAME = 0x04,
+};
+
+/**
+ * struct drm_dp_vsc_sdp - drm DP VSC SDP
+ *
+ * This structure represents a DP VSC SDP of drm
+ * It is based on DP 1.4 spec [Table 2-116: VSC SDP Header Bytes] and
+ * [Table 2-117: VSC SDP Payload for DB16 through DB18]
+ *
+ * @sdp_type: secondary-data packet type
+ * @revision: revision number
+ * @length: number of valid data bytes
+ * @pixelformat: pixel encoding format
+ * @colorimetry: colorimetry format
+ * @bpc: bit per color
+ * @dynamic_range: dynamic range information
+ * @content_type: CTA-861-G defines content types and expected processing by a sink device
+ */
+struct drm_dp_vsc_sdp {
+	unsigned char sdp_type;
+	unsigned char revision;
+	unsigned char length;
+	enum dp_pixelformat pixelformat;
+	enum dp_colorimetry colorimetry;
+	int bpc;
+	enum dp_dynamic_range dynamic_range;
+	enum dp_content_type content_type;
+};
+
 int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]);
 
 static inline int
@@ -1548,6 +1687,13 @@ enum drm_dp_quirk {
 	 * capabilities advertised.
 	 */
 	DP_QUIRK_FORCE_DPCD_BACKLIGHT,
+	/**
+	 * @DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS:
+	 *
+	 * The device supports a link rate of 3.24 Gbps (multiplier 0xc) despite
+	 * the DP_MAX_LINK_RATE register reporting a lower max multiplier.
+	 */
+	DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS,
 };
 
 /**
@@ -1598,4 +1744,26 @@ static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
 
 #endif
 
+/**
+ * struct drm_dp_phy_test_params - DP Phy Compliance parameters
+ * @link_rate: Requested Link rate from DPCD 0x219
+ * @num_lanes: Number of lanes requested by sing through DPCD 0x220
+ * @phy_pattern: DP Phy test pattern from DPCD 0x248
+ * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B
+ * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259
+ * @enhanced_frame_cap: flag for enhanced frame capability.
+ */
+struct drm_dp_phy_test_params {
+	int link_rate;
+	u8 num_lanes;
+	u8 phy_pattern;
+	u8 hbr2_reset[2];
+	u8 custom80[10];
+	bool enhanced_frame_cap;
+};
+
+int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
+				struct drm_dp_phy_test_params *data);
+int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
+				struct drm_dp_phy_test_params *data, u8 dp_rev);
 #endif /* _DRM_DP_HELPER_H_ */
diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index 3cde42b333c3..9e1ffcd7cb68 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -157,19 +157,45 @@ struct drm_dp_mst_port {
 	 */
 	bool has_audio;
 
+	/**
+	 * @fec_capable: bool indicating if FEC can be supported up to that
+	 * point in the MST topology.
+	 */
 	bool fec_capable;
 };
 
+/* sideband msg header - not bit struct */
+struct drm_dp_sideband_msg_hdr {
+	u8 lct;
+	u8 lcr;
+	u8 rad[8];
+	bool broadcast;
+	bool path_msg;
+	u8 msg_len;
+	bool somt;
+	bool eomt;
+	bool seqno;
+};
+
+struct drm_dp_sideband_msg_rx {
+	u8 chunk[48];
+	u8 msg[256];
+	u8 curchunk_len;
+	u8 curchunk_idx; /* chunk we are parsing now */
+	u8 curchunk_hdrlen;
+	u8 curlen; /* total length of the msg */
+	bool have_somt;
+	bool have_eomt;
+	struct drm_dp_sideband_msg_hdr initial_hdr;
+};
+
 /**
  * struct drm_dp_mst_branch - MST branch device.
  * @rad: Relative Address to talk to this branch device.
  * @lct: Link count total to talk to this branch device.
  * @num_ports: number of ports on the branch.
- * @msg_slots: one bit per transmitted msg slot.
  * @port_parent: pointer to the port parent, NULL if toplevel.
  * @mgr: topology manager for this branch device.
- * @tx_slots: transmission slots for this device.
- * @last_seqno: last sequence number used to talk to this.
  * @link_address_sent: if a link address message has been sent to this device yet.
  * @guid: guid for DP 1.2 branch device. port under this branch can be
  * identified by port #.
@@ -210,7 +236,6 @@ struct drm_dp_mst_branch {
 	u8 lct;
 	int num_ports;
 
-	int msg_slots;
 	/**
 	 * @ports: the list of ports on this branch device. This should be
 	 * considered protected for reading by &drm_dp_mst_topology_mgr.lock.
@@ -223,13 +248,9 @@ struct drm_dp_mst_branch {
 	 */
 	struct list_head ports;
 
-	/* list of tx ops queue for this port */
 	struct drm_dp_mst_port *port_parent;
 	struct drm_dp_mst_topology_mgr *mgr;
 
-	/* slots are protected by mstb->mgr->qlock */
-	struct drm_dp_sideband_msg_tx *tx_slots[2];
-	int last_seqno;
 	bool link_address_sent;
 
 	/* global unique identifier to identify branch devices */
@@ -237,19 +258,6 @@ struct drm_dp_mst_branch {
 };
 
 
-/* sideband msg header - not bit struct */
-struct drm_dp_sideband_msg_hdr {
-	u8 lct;
-	u8 lcr;
-	u8 rad[8];
-	bool broadcast;
-	bool path_msg;
-	u8 msg_len;
-	bool somt;
-	bool eomt;
-	bool seqno;
-};
-
 struct drm_dp_nak_reply {
 	u8 guid[16];
 	u8 reason;
@@ -306,18 +314,6 @@ struct drm_dp_remote_i2c_write_ack_reply {
 };
 
 
-struct drm_dp_sideband_msg_rx {
-	u8 chunk[48];
-	u8 msg[256];
-	u8 curchunk_len;
-	u8 curchunk_idx; /* chunk we are parsing now */
-	u8 curchunk_hdrlen;
-	u8 curlen; /* total length of the msg */
-	bool have_somt;
-	bool have_eomt;
-	struct drm_dp_sideband_msg_hdr initial_hdr;
-};
-
 #define DRM_DP_MAX_SDP_STREAMS 16
 struct drm_dp_allocate_payload {
 	u8 port_number;
@@ -479,8 +475,6 @@ struct drm_dp_mst_topology_mgr;
 struct drm_dp_mst_topology_cbs {
 	/* create a connector for a port */
 	struct drm_connector *(*add_connector)(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port, const char *path);
-	void (*destroy_connector)(struct drm_dp_mst_topology_mgr *mgr,
-				  struct drm_connector *connector);
 };
 
 #define DP_MAX_PAYLOAD (sizeof(unsigned long) * 8)
@@ -555,15 +549,17 @@ struct drm_dp_mst_topology_mgr {
 	 */
 	int conn_base_id;
 
-	/**
-	 * @down_rep_recv: Message receiver state for down replies.
-	 */
-	struct drm_dp_sideband_msg_rx down_rep_recv;
 	/**
 	 * @up_req_recv: Message receiver state for up requests.
 	 */
 	struct drm_dp_sideband_msg_rx up_req_recv;
 
+	/**
+	 * @down_rep_recv: Message receiver state for replies to down
+	 * requests.
+	 */
+	struct drm_dp_sideband_msg_rx down_rep_recv;
+
 	/**
 	 * @lock: protects @mst_state, @mst_primary, @dpcd, and
 	 * @payload_id_table_cleared.
@@ -589,11 +585,6 @@ struct drm_dp_mst_topology_mgr {
 	 */
 	bool payload_id_table_cleared : 1;
 
-	/**
-	 * @is_waiting_for_dwn_reply: whether we're waiting for a down reply.
-	 */
-	bool is_waiting_for_dwn_reply : 1;
-
 	/**
 	 * @mst_primary: Pointer to the primary/first branch device.
 	 */
@@ -618,13 +609,12 @@ struct drm_dp_mst_topology_mgr {
 	const struct drm_private_state_funcs *funcs;
 
 	/**
-	 * @qlock: protects @tx_msg_downq, the &drm_dp_mst_branch.txslost and
-	 * &drm_dp_sideband_msg_tx.state once they are queued
+	 * @qlock: protects @tx_msg_downq and &drm_dp_sideband_msg_tx.state
 	 */
 	struct mutex qlock;
 
 	/**
-	 * @tx_msg_downq: List of pending down replies.
+	 * @tx_msg_downq: List of pending down requests
 	 */
 	struct list_head tx_msg_downq;
 
@@ -734,8 +724,6 @@ drm_dp_mst_detect_port(struct drm_connector *connector,
 		       struct drm_dp_mst_topology_mgr *mgr,
 		       struct drm_dp_mst_port *port);
 
-bool drm_dp_mst_port_has_audio(struct drm_dp_mst_topology_mgr *mgr,
-					struct drm_dp_mst_port *port);
 struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port);
 
 
diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h
index 97109df5beac..6d457652f199 100644
--- a/include/drm/drm_drv.h
+++ b/include/drm/drm_drv.h
@@ -262,9 +262,11 @@ struct drm_driver {
 	 * @release:
 	 *
 	 * Optional callback for destroying device data after the final
-	 * reference is released, i.e. the device is being destroyed. Drivers
-	 * using this callback are responsible for calling drm_dev_fini()
-	 * to finalize the device and then freeing the struct themselves.
+	 * reference is released, i.e. the device is being destroyed.
+	 *
+	 * This is deprecated, clean up all memory allocations associated with a
+	 * &drm_device using drmm_add_action(), drmm_kmalloc() and related
+	 * managed resources functions.
 	 */
 	void (*release) (struct drm_device *);
 
@@ -323,7 +325,7 @@ struct drm_driver {
 	 *
 	 * Allows drivers to create driver-specific debugfs files.
 	 */
-	int (*debugfs_init)(struct drm_minor *minor);
+	void (*debugfs_init)(struct drm_minor *minor);
 
 	/**
 	 * @gem_free_object: deconstructor for drm_gem_objects
@@ -620,7 +622,39 @@ int drm_dev_init(struct drm_device *dev,
 int devm_drm_dev_init(struct device *parent,
 		      struct drm_device *dev,
 		      struct drm_driver *driver);
-void drm_dev_fini(struct drm_device *dev);
+
+void *__devm_drm_dev_alloc(struct device *parent, struct drm_driver *driver,
+			   size_t size, size_t offset);
+
+/**
+ * devm_drm_dev_alloc - Resource managed allocation of a &drm_device instance
+ * @parent: Parent device object
+ * @driver: DRM driver
+ * @type: the type of the struct which contains struct &drm_device
+ * @member: the name of the &drm_device within @type.
+ *
+ * This allocates and initialize a new DRM device. No device registration is done.
+ * Call drm_dev_register() to advertice the device to user space and register it
+ * with other core subsystems. This should be done last in the device
+ * initialization sequence to make sure userspace can't access an inconsistent
+ * state.
+ *
+ * The initial ref-count of the object is 1. Use drm_dev_get() and
+ * drm_dev_put() to take and drop further ref-counts.
+ *
+ * It is recommended that drivers embed &struct drm_device into their own device
+ * structure.
+ *
+ * Note that this manages the lifetime of the resulting &drm_device
+ * automatically using devres. The DRM device initialized with this function is
+ * automatically put on driver detach using drm_dev_put().
+ *
+ * RETURNS:
+ * Pointer to new DRM device, or ERR_PTR on failure.
+ */
+#define devm_drm_dev_alloc(parent, driver, type, member) \
+	((type *) __devm_drm_dev_alloc(parent, driver, sizeof(type), \
+				       offsetof(type, member)))
 
 struct drm_device *drm_dev_alloc(struct drm_driver *driver,
 				 struct device *parent);
diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h
index 4370e039c015..a60f5f1555ac 100644
--- a/include/drm/drm_encoder.h
+++ b/include/drm/drm_encoder.h
@@ -142,7 +142,7 @@ struct drm_encoder {
 	 * the bits for all &drm_crtc objects this encoder can be connected to
 	 * before calling drm_dev_register().
 	 *
-	 * In reality almost every driver gets this wrong.
+	 * You will get a WARN if you get this wrong in the driver.
 	 *
 	 * Note that since CRTC objects can't be hotplugged the assigned indices
 	 * are stable and hence known before registering all objects.
@@ -159,7 +159,11 @@ struct drm_encoder {
 	 * encoders can be used in a cloned configuration, they both should have
 	 * each another bits set.
 	 *
-	 * In reality almost every driver gets this wrong.
+	 * As an exception to the above rule if the driver doesn't implement
+	 * any cloning it can leave @possible_clones set to 0. The core will
+	 * automagically fix this up by setting the bit for the encoder itself.
+	 *
+	 * You will get a WARN if you get this wrong in the driver.
 	 *
 	 * Note that since encoder objects can't be hotplugged the assigned indices
 	 * are stable and hence known before registering all objects.
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 208dbf87afa3..306aa3a60be9 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -269,7 +269,8 @@ int drm_fb_helper_debug_leave(struct fb_info *info);
 void drm_fb_helper_lastclose(struct drm_device *dev);
 void drm_fb_helper_output_poll_changed(struct drm_device *dev);
 
-int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp);
+void drm_fbdev_generic_setup(struct drm_device *dev,
+			     unsigned int preferred_bpp);
 #else
 static inline void drm_fb_helper_prepare(struct drm_device *dev,
 					struct drm_fb_helper *helper,
@@ -443,10 +444,9 @@ static inline void drm_fb_helper_output_poll_changed(struct drm_device *dev)
 {
 }
 
-static inline int
+static inline void
 drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)
 {
-	return 0;
 }
 
 #endif
diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h
index 5aaf1c4593a9..716990bace10 100644
--- a/include/drm/drm_file.h
+++ b/include/drm/drm_file.h
@@ -201,6 +201,17 @@ struct drm_file {
 	 */
 	bool writeback_connectors;
 
+	/**
+	 * @was_master:
+	 *
+	 * This client has or had, master capability. Protected by struct
+	 * &drm_device.master_mutex.
+	 *
+	 * This is used to ensure that CAP_SYS_ADMIN is not enforced, if the
+	 * client is or was master in the past.
+	 */
+	bool was_master;
+
 	/**
 	 * @is_master:
 	 *
diff --git a/include/drm/drm_framebuffer.h b/include/drm/drm_framebuffer.h
index c0e0256e3e98..be658ebbec72 100644
--- a/include/drm/drm_framebuffer.h
+++ b/include/drm/drm_framebuffer.h
@@ -297,4 +297,42 @@ int drm_framebuffer_plane_width(int width,
 int drm_framebuffer_plane_height(int height,
 				 const struct drm_framebuffer *fb, int plane);
 
+/**
+ * struct drm_afbc_framebuffer - a special afbc frame buffer object
+ *
+ * A derived class of struct drm_framebuffer, dedicated for afbc use cases.
+ */
+struct drm_afbc_framebuffer {
+	/**
+	 * @base: base framebuffer structure.
+	 */
+	struct drm_framebuffer base;
+	/**
+	 * @block_width: width of a single afbc block
+	 */
+	u32 block_width;
+	/**
+	 * @block_height: height of a single afbc block
+	 */
+	u32 block_height;
+	/**
+	 * @aligned_width: aligned frame buffer width
+	 */
+	u32 aligned_width;
+	/**
+	 * @aligned_height: aligned frame buffer height
+	 */
+	u32 aligned_height;
+	/**
+	 * @offset: offset of the first afbc header
+	 */
+	u32 offset;
+	/**
+	 * @afbc_size: minimum size of afbc buffer
+	 */
+	u32 afbc_size;
+};
+
+#define fb_to_afbc_fb(x) container_of(x, struct drm_afbc_framebuffer, base)
+
 #endif
diff --git a/include/drm/drm_gem_framebuffer_helper.h b/include/drm/drm_gem_framebuffer_helper.h
index d9f13fd25b0a..6b013154911d 100644
--- a/include/drm/drm_gem_framebuffer_helper.h
+++ b/include/drm/drm_gem_framebuffer_helper.h
@@ -1,6 +1,7 @@
 #ifndef __DRM_GEM_FB_HELPER_H__
 #define __DRM_GEM_FB_HELPER_H__
 
+struct drm_afbc_framebuffer;
 struct drm_device;
 struct drm_fb_helper_surface_size;
 struct drm_file;
@@ -12,12 +13,19 @@ struct drm_plane;
 struct drm_plane_state;
 struct drm_simple_display_pipe;
 
+#define AFBC_VENDOR_AND_TYPE_MASK	GENMASK_ULL(63, 52)
+
 struct drm_gem_object *drm_gem_fb_get_obj(struct drm_framebuffer *fb,
 					  unsigned int plane);
 void drm_gem_fb_destroy(struct drm_framebuffer *fb);
 int drm_gem_fb_create_handle(struct drm_framebuffer *fb, struct drm_file *file,
 			     unsigned int *handle);
 
+int drm_gem_fb_init_with_funcs(struct drm_device *dev,
+			       struct drm_framebuffer *fb,
+			       struct drm_file *file,
+			       const struct drm_mode_fb_cmd2 *mode_cmd,
+			       const struct drm_framebuffer_funcs *funcs);
 struct drm_framebuffer *
 drm_gem_fb_create_with_funcs(struct drm_device *dev, struct drm_file *file,
 			     const struct drm_mode_fb_cmd2 *mode_cmd,
@@ -29,6 +37,13 @@ struct drm_framebuffer *
 drm_gem_fb_create_with_dirty(struct drm_device *dev, struct drm_file *file,
 			     const struct drm_mode_fb_cmd2 *mode_cmd);
 
+#define drm_is_afbc(modifier) \
+	(((modifier) & AFBC_VENDOR_AND_TYPE_MASK) == DRM_FORMAT_MOD_ARM_AFBC(0))
+
+int drm_gem_fb_afbc_init(struct drm_device *dev,
+			 const struct drm_mode_fb_cmd2 *mode_cmd,
+			 struct drm_afbc_framebuffer *afbc_fb);
+
 int drm_gem_fb_prepare_fb(struct drm_plane *plane,
 			  struct drm_plane_state *state);
 int drm_gem_fb_simple_display_pipe_prepare_fb(struct drm_simple_display_pipe *pipe,
diff --git a/include/drm/drm_gem_vram_helper.h b/include/drm/drm_gem_vram_helper.h
index 0f6e47213d8d..b63bcd1b996d 100644
--- a/include/drm/drm_gem_vram_helper.h
+++ b/include/drm/drm_gem_vram_helper.h
@@ -196,7 +196,7 @@ static inline struct drm_vram_mm *drm_vram_mm_of_bdev(
 	return container_of(bdev, struct drm_vram_mm, bdev);
 }
 
-int drm_vram_mm_debugfs_init(struct drm_minor *minor);
+void drm_vram_mm_debugfs_init(struct drm_minor *minor);
 
 /*
  * Helpers for integration with struct drm_device
diff --git a/include/drm/drm_legacy.h b/include/drm/drm_legacy.h
index aed382c17b26..852d7451eeb1 100644
--- a/include/drm/drm_legacy.h
+++ b/include/drm/drm_legacy.h
@@ -194,11 +194,26 @@ void drm_legacy_idlelock_release(struct drm_lock_data *lock);
 
 #ifdef CONFIG_PCI
 
+struct drm_dma_handle *drm_pci_alloc(struct drm_device *dev, size_t size,
+				     size_t align);
+void drm_pci_free(struct drm_device *dev, struct drm_dma_handle *dmah);
+
 int drm_legacy_pci_init(struct drm_driver *driver, struct pci_driver *pdriver);
 void drm_legacy_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver);
 
 #else
 
+static inline struct drm_dma_handle *drm_pci_alloc(struct drm_device *dev,
+						   size_t size, size_t align)
+{
+	return NULL;
+}
+
+static inline void drm_pci_free(struct drm_device *dev,
+				struct drm_dma_handle *dmah)
+{
+}
+
 static inline int drm_legacy_pci_init(struct drm_driver *driver,
 				      struct pci_driver *pdriver)
 {
diff --git a/include/drm/drm_managed.h b/include/drm/drm_managed.h
new file mode 100644
index 000000000000..ca4114633bf9
--- /dev/null
+++ b/include/drm/drm_managed.h
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#ifndef _DRM_MANAGED_H_
+#define _DRM_MANAGED_H_
+
+#include <linux/gfp.h>
+#include <linux/overflow.h>
+#include <linux/types.h>
+
+struct drm_device;
+
+typedef void (*drmres_release_t)(struct drm_device *dev, void *res);
+
+/**
+ * drmm_add_action - add a managed release action to a &drm_device
+ * @dev: DRM device
+ * @action: function which should be called when @dev is released
+ * @data: opaque pointer, passed to @action
+ *
+ * This function adds the @release action with optional parameter @data to the
+ * list of cleanup actions for @dev. The cleanup actions will be run in reverse
+ * order in the final drm_dev_put() call for @dev.
+ */
+#define drmm_add_action(dev, action, data) \
+	__drmm_add_action(dev, action, data, #action)
+
+int __must_check __drmm_add_action(struct drm_device *dev,
+				   drmres_release_t action,
+				   void *data, const char *name);
+
+/**
+ * drmm_add_action_or_reset - add a managed release action to a &drm_device
+ * @dev: DRM device
+ * @action: function which should be called when @dev is released
+ * @data: opaque pointer, passed to @action
+ *
+ * Similar to drmm_add_action(), with the only difference that upon failure
+ * @action is directly called for any cleanup work necessary on failures.
+ */
+#define drmm_add_action_or_reset(dev, action, data) \
+	__drmm_add_action_or_reset(dev, action, data, #action)
+
+int __must_check __drmm_add_action_or_reset(struct drm_device *dev,
+					    drmres_release_t action,
+					    void *data, const char *name);
+
+void drmm_add_final_kfree(struct drm_device *dev, void *container);
+
+void *drmm_kmalloc(struct drm_device *dev, size_t size, gfp_t gfp) __malloc;
+
+/**
+ * drmm_kzalloc - &drm_device managed kzalloc()
+ * @dev: DRM device
+ * @size: size of the memory allocation
+ * @gfp: GFP allocation flags
+ *
+ * This is a &drm_device managed version of kzalloc(). The allocated memory is
+ * automatically freed on the final drm_dev_put(). Memory can also be freed
+ * before the final drm_dev_put() by calling drmm_kfree().
+ */
+static inline void *drmm_kzalloc(struct drm_device *dev, size_t size, gfp_t gfp)
+{
+	return drmm_kmalloc(dev, size, gfp | __GFP_ZERO);
+}
+
+/**
+ * drmm_kmalloc_array - &drm_device managed kmalloc_array()
+ * @dev: DRM device
+ * @n: number of array elements to allocate
+ * @size: size of array member
+ * @flags: GFP allocation flags
+ *
+ * This is a &drm_device managed version of kmalloc_array(). The allocated
+ * memory is automatically freed on the final drm_dev_put() and works exactly
+ * like a memory allocation obtained by drmm_kmalloc().
+ */
+static inline void *drmm_kmalloc_array(struct drm_device *dev,
+				       size_t n, size_t size, gfp_t flags)
+{
+	size_t bytes;
+
+	if (unlikely(check_mul_overflow(n, size, &bytes)))
+		return NULL;
+
+	return drmm_kmalloc(dev, bytes, flags);
+}
+
+/**
+ * drmm_kcalloc - &drm_device managed kcalloc()
+ * @dev: DRM device
+ * @n: number of array elements to allocate
+ * @size: size of array member
+ * @flags: GFP allocation flags
+ *
+ * This is a &drm_device managed version of kcalloc(). The allocated memory is
+ * automatically freed on the final drm_dev_put() and works exactly like a
+ * memory allocation obtained by drmm_kmalloc().
+ */
+static inline void *drmm_kcalloc(struct drm_device *dev,
+				 size_t n, size_t size, gfp_t flags)
+{
+	return drmm_kmalloc_array(dev, n, size, flags | __GFP_ZERO);
+}
+
+char *drmm_kstrdup(struct drm_device *dev, const char *s, gfp_t gfp);
+
+void drmm_kfree(struct drm_device *dev, void *data);
+
+#endif
diff --git a/include/drm/drm_mipi_dbi.h b/include/drm/drm_mipi_dbi.h
index 33f325f5af2b..4d0e49c0ed2c 100644
--- a/include/drm/drm_mipi_dbi.h
+++ b/include/drm/drm_mipi_dbi.h
@@ -152,7 +152,6 @@ int mipi_dbi_dev_init_with_formats(struct mipi_dbi_dev *dbidev,
 int mipi_dbi_dev_init(struct mipi_dbi_dev *dbidev,
 		      const struct drm_simple_display_pipe_funcs *funcs,
 		      const struct drm_display_mode *mode, unsigned int rotation);
-void mipi_dbi_release(struct drm_device *drm);
 void mipi_dbi_pipe_update(struct drm_simple_display_pipe *pipe,
 			  struct drm_plane_state *old_state);
 void mipi_dbi_enable_flush(struct mipi_dbi_dev *dbidev,
@@ -170,7 +169,8 @@ int mipi_dbi_spi_transfer(struct spi_device *spi, u32 speed_hz,
 
 int mipi_dbi_command_read(struct mipi_dbi *dbi, u8 cmd, u8 *val);
 int mipi_dbi_command_buf(struct mipi_dbi *dbi, u8 cmd, u8 *data, size_t len);
-int mipi_dbi_command_stackbuf(struct mipi_dbi *dbi, u8 cmd, u8 *data, size_t len);
+int mipi_dbi_command_stackbuf(struct mipi_dbi *dbi, u8 cmd, const u8 *data,
+			      size_t len);
 int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
 		      struct drm_rect *clip, bool swap);
 /**
@@ -187,12 +187,12 @@ int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
  */
 #define mipi_dbi_command(dbi, cmd, seq...) \
 ({ \
-	u8 d[] = { seq }; \
+	const u8 d[] = { seq }; \
 	mipi_dbi_command_stackbuf(dbi, cmd, d, ARRAY_SIZE(d)); \
 })
 
 #ifdef CONFIG_DEBUG_FS
-int mipi_dbi_debugfs_init(struct drm_minor *minor);
+void mipi_dbi_debugfs_init(struct drm_minor *minor);
 #else
 #define mipi_dbi_debugfs_init		NULL
 #endif
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 3bcbe30339f0..6c3ef49b46b3 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -929,7 +929,23 @@ struct drm_mode_config {
 	const struct drm_mode_config_helper_funcs *helper_private;
 };
 
-void drm_mode_config_init(struct drm_device *dev);
+int __must_check drmm_mode_config_init(struct drm_device *dev);
+
+/**
+ * drm_mode_config_init - DRM mode_configuration structure initialization
+ * @dev: DRM device
+ *
+ * This is the unmanaged version of drmm_mode_config_init() for drivers which
+ * still explicitly call drm_mode_config_cleanup().
+ *
+ * FIXME: This function is deprecated and drivers should be converted over to
+ * drmm_mode_config_init().
+ */
+static inline int drm_mode_config_init(struct drm_device *dev)
+{
+	return drmm_mode_config_init(dev);
+}
+
 void drm_mode_config_reset(struct drm_device *dev);
 void drm_mode_config_cleanup(struct drm_device *dev);
 
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index 99134d4f35eb..730fc31de4fb 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -390,16 +390,6 @@ struct drm_display_mode {
 	 */
 	int vrefresh;
 
-	/**
-	 * @hsync:
-	 *
-	 * Horizontal refresh rate, for debug output in human readable form. Not
-	 * used in a functional way.
-	 *
-	 * This value is in kHz.
-	 */
-	int hsync;
-
 	/**
 	 * @picture_aspect_ratio:
 	 *
@@ -493,7 +483,6 @@ int of_get_drm_display_mode(struct device_node *np,
 			    int index);
 
 void drm_mode_set_name(struct drm_display_mode *mode);
-int drm_mode_hsync(const struct drm_display_mode *mode);
 int drm_mode_vrefresh(const struct drm_display_mode *mode);
 void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
 			    int *hdisplay, int *vdisplay);
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index 7c20b1c8b6a7..421a30f08463 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -1075,8 +1075,35 @@ struct drm_connector_helper_funcs {
 	void (*atomic_commit)(struct drm_connector *connector,
 			      struct drm_connector_state *state);
 
+	/**
+	 * @prepare_writeback_job:
+	 *
+	 * As writeback jobs contain a framebuffer, drivers may need to
+	 * prepare and clean them up the same way they can prepare and
+	 * clean up framebuffers for planes. This optional connector operation
+	 * is used to support the preparation of writeback jobs. The job
+	 * prepare operation is called from drm_atomic_helper_prepare_planes()
+	 * for struct &drm_writeback_connector connectors only.
+	 *
+	 * This operation is optional.
+	 *
+	 * This callback is used by the atomic modeset helpers.
+	 */
 	int (*prepare_writeback_job)(struct drm_writeback_connector *connector,
 				     struct drm_writeback_job *job);
+	/**
+	 * @cleanup_writeback_job:
+	 *
+	 * This optional connector operation is used to support the
+	 * cleanup of writeback jobs. The job cleanup operation is called
+	 * from the existing drm_writeback_cleanup_job() function, invoked
+	 * both when destroying the job as part of an aborted commit, or when
+	 * the job completes.
+	 *
+	 * This operation is optional.
+	 *
+	 * This callback is used by the atomic modeset helpers.
+	 */
 	void (*cleanup_writeback_job)(struct drm_writeback_connector *connector,
 				      struct drm_writeback_job *job);
 };
diff --git a/include/drm/drm_pci.h b/include/drm/drm_pci.h
deleted file mode 100644
index 3941b0255ecf..000000000000
--- a/include/drm/drm_pci.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Internal Header for the Direct Rendering Manager
- *
- * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
- * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
- * Copyright (c) 2009-2010, Code Aurora Forum.
- * All rights reserved.
- *
- * Author: Rickard E. (Rik) Faith <faith@valinux.com>
- * Author: Gareth Hughes <gareth@valinux.com>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef _DRM_PCI_H_
-#define _DRM_PCI_H_
-
-#include <linux/pci.h>
-
-struct drm_dma_handle;
-struct drm_device;
-struct drm_driver;
-struct drm_master;
-
-#ifdef CONFIG_PCI
-
-struct drm_dma_handle *drm_pci_alloc(struct drm_device *dev, size_t size,
-				     size_t align);
-void drm_pci_free(struct drm_device *dev, struct drm_dma_handle * dmah);
-
-#else
-
-static inline struct drm_dma_handle *drm_pci_alloc(struct drm_device *dev,
-						   size_t size, size_t align)
-{
-	return NULL;
-}
-
-static inline void drm_pci_free(struct drm_device *dev,
-				struct drm_dma_handle *dmah)
-{
-}
-
-#endif
-
-#endif /* _DRM_PCI_H_ */
diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index ca7cee8e728a..1c9417430d08 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -313,6 +313,10 @@ enum drm_debug_category {
 	 * @DRM_UT_DP: Used in the DP code.
 	 */
 	DRM_UT_DP		= 0x100,
+	/**
+	 * @DRM_UT_DRMRES: Used in the drm managed resources code.
+	 */
+	DRM_UT_DRMRES		= 0x200,
 };
 
 static inline bool drm_debug_enabled(enum drm_debug_category category)
@@ -442,6 +446,8 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
 	drm_dev_dbg((drm)->dev, DRM_UT_LEASE, fmt, ##__VA_ARGS__)
 #define drm_dbg_dp(drm, fmt, ...)					\
 	drm_dev_dbg((drm)->dev, DRM_UT_DP, fmt, ##__VA_ARGS__)
+#define drm_dbg_drmres(drm, fmt, ...)					\
+	drm_dev_dbg((drm)->dev, DRM_UT_DRMRES, fmt, ##__VA_ARGS__)
 
 
 /*
diff --git a/include/drm/drm_writeback.h b/include/drm/drm_writeback.h
index 777c14c847f0..9697d2714d2a 100644
--- a/include/drm/drm_writeback.h
+++ b/include/drm/drm_writeback.h
@@ -15,7 +15,13 @@
 #include <drm/drm_encoder.h>
 #include <linux/workqueue.h>
 
+/**
+ * struct drm_writeback_connector - DRM writeback connector
+ */
 struct drm_writeback_connector {
+	/**
+	 * @base: base drm_connector object
+	 */
 	struct drm_connector base;
 
 	/**
@@ -78,6 +84,9 @@ struct drm_writeback_connector {
 	char timeline_name[32];
 };
 
+/**
+ * struct drm_writeback_job - DRM writeback job
+ */
 struct drm_writeback_job {
 	/**
 	 * @connector:
diff --git a/include/drm/gpu_scheduler.h b/include/drm/gpu_scheduler.h
index 26b04ff62676..a21b3b92135a 100644
--- a/include/drm/gpu_scheduler.h
+++ b/include/drm/gpu_scheduler.h
@@ -56,6 +56,7 @@ enum drm_sched_priority {
  *              Jobs from this entity can be scheduled on any scheduler
  *              on this list.
  * @num_sched_list: number of drm_gpu_schedulers in the sched_list.
+ * @priority: priority of the entity
  * @rq_lock: lock to modify the runqueue to which this entity belongs.
  * @job_queue: the list of jobs of this entity.
  * @fence_seq: a linearly increasing seqno incremented with each
diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h
index 1d2c12219f44..662d8351c87a 100644
--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -593,12 +593,16 @@
 
 /* TGL */
 #define INTEL_TGL_12_IDS(info) \
-	INTEL_VGA_DEVICE(0x9A49, info), \
 	INTEL_VGA_DEVICE(0x9A40, info), \
+	INTEL_VGA_DEVICE(0x9A49, info), \
 	INTEL_VGA_DEVICE(0x9A59, info), \
 	INTEL_VGA_DEVICE(0x9A60, info), \
 	INTEL_VGA_DEVICE(0x9A68, info), \
 	INTEL_VGA_DEVICE(0x9A70, info), \
-	INTEL_VGA_DEVICE(0x9A78, info)
+	INTEL_VGA_DEVICE(0x9A78, info), \
+	INTEL_VGA_DEVICE(0x9AC0, info), \
+	INTEL_VGA_DEVICE(0x9AC9, info), \
+	INTEL_VGA_DEVICE(0x9AD9, info), \
+	INTEL_VGA_DEVICE(0x9AF8, info)
 
 #endif /* _I915_PCIIDS_H */
diff --git a/include/drm/ttm/ttm_debug.h b/include/drm/ttm/ttm_debug.h
deleted file mode 100644
index b5e460fa5086..000000000000
--- a/include/drm/ttm/ttm_debug.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/**************************************************************************
- *
- * Copyright (c) 2017 Advanced Micro Devices, Inc.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sub license, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial portions
- * of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
- * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
- * USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- **************************************************************************/
-/*
- * Authors: Tom St Denis <tom.stdenis@amd.com>
- */
-extern void ttm_trace_dma_map(struct device *dev, struct ttm_dma_tt *tt);
-extern void ttm_trace_dma_unmap(struct device *dev, struct ttm_dma_tt *tt);
diff --git a/include/dt-bindings/clock/imx7ulp-clock.h b/include/dt-bindings/clock/imx7ulp-clock.h
index 38145bdcd975..b58370d146e2 100644
--- a/include/dt-bindings/clock/imx7ulp-clock.h
+++ b/include/dt-bindings/clock/imx7ulp-clock.h
@@ -58,7 +58,10 @@
 #define IMX7ULP_CLK_HSRUN_SYS_SEL	44
 #define IMX7ULP_CLK_HSRUN_CORE_DIV	45
 
-#define IMX7ULP_CLK_SCG1_END		46
+#define IMX7ULP_CLK_CORE		46
+#define IMX7ULP_CLK_HSRUN_CORE		47
+
+#define IMX7ULP_CLK_SCG1_END		48
 
 /* PCC2 */
 #define IMX7ULP_CLK_DMA1		0
diff --git a/include/dt-bindings/clock/imx8mp-clock.h b/include/dt-bindings/clock/imx8mp-clock.h
index 47ab082238b4..305433f9cc07 100644
--- a/include/dt-bindings/clock/imx8mp-clock.h
+++ b/include/dt-bindings/clock/imx8mp-clock.h
@@ -298,4 +298,66 @@
 
 #define IMX8MP_CLK_END				289
 
+#define IMX8MP_CLK_AUDIOMIX_SAI1_IPG		0
+#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1		1
+#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2		2
+#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3		3
+#define IMX8MP_CLK_AUDIOMIX_SAI2_IPG		4
+#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1		5
+#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2		6
+#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3		7
+#define IMX8MP_CLK_AUDIOMIX_SAI3_IPG		8
+#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1		9
+#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2		10
+#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3		11
+#define IMX8MP_CLK_AUDIOMIX_SAI5_IPG		12
+#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1		13
+#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2		14
+#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3		15
+#define IMX8MP_CLK_AUDIOMIX_SAI6_IPG		16
+#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1		17
+#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2		18
+#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3		19
+#define IMX8MP_CLK_AUDIOMIX_SAI7_IPG		20
+#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1		21
+#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2		22
+#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3		23
+#define IMX8MP_CLK_AUDIOMIX_ASRC_IPG		24
+#define IMX8MP_CLK_AUDIOMIX_PDM_IPG		25
+#define IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT		26
+#define IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT		27
+#define IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT		28
+#define IMX8MP_CLK_AUDIOMIX_DSP_ROOT		29
+#define IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT		30
+#define IMX8MP_CLK_AUDIOMIX_EARC_IPG		31
+#define IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG		32
+#define IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG		33
+#define IMX8MP_CLK_AUDIOMIX_EDMA_ROOT		34
+#define IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT		35
+#define IMX8MP_CLK_AUDIOMIX_MU2_ROOT		36
+#define IMX8MP_CLK_AUDIOMIX_MU3_ROOT		37
+#define IMX8MP_CLK_AUDIOMIX_EARC_PHY		38
+#define IMX8MP_CLK_AUDIOMIX_PDM_ROOT		39
+#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1_SEL	40
+#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2_SEL	41
+#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1_SEL	42
+#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2_SEL	43
+#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1_SEL	44
+#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2_SEL	45
+#define IMX8MP_CLK_AUDIOMIX_SAI4_MCLK1_SEL	46
+#define IMX8MP_CLK_AUDIOMIX_SAI4_MCLK2_SEL	47
+#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1_SEL	48
+#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2_SEL	49
+#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1_SEL	50
+#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2_SEL	51
+#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1_SEL	52
+#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2_SEL	53
+#define IMX8MP_CLK_AUDIOMIX_PDM_SEL		54
+#define IMX8MP_CLK_AUDIOMIX_SAI_PLL_REF_SEL	55
+#define IMX8MP_CLK_AUDIOMIX_SAI_PLL		56
+#define IMX8MP_CLK_AUDIOMIX_SAI_PLL_BYPASS	57
+#define IMX8MP_CLK_AUDIOMIX_SAI_PLL_OUT		58
+
+#define IMX8MP_CLK_AUDIOMIX_END			59
+
 #endif
diff --git a/include/dt-bindings/clock/r8a7742-cpg-mssr.h b/include/dt-bindings/clock/r8a7742-cpg-mssr.h
new file mode 100644
index 000000000000..e68191c24881
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7742-cpg-mssr.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A7742_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A7742_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a7742 CPG Core Clocks */
+#define R8A7742_CLK_Z		0
+#define R8A7742_CLK_Z2		1
+#define R8A7742_CLK_ZG		2
+#define R8A7742_CLK_ZTR		3
+#define R8A7742_CLK_ZTRD2	4
+#define R8A7742_CLK_ZT		5
+#define R8A7742_CLK_ZX		6
+#define R8A7742_CLK_ZS		7
+#define R8A7742_CLK_HP		8
+#define R8A7742_CLK_B		9
+#define R8A7742_CLK_LB		10
+#define R8A7742_CLK_P		11
+#define R8A7742_CLK_CL		12
+#define R8A7742_CLK_M2		13
+#define R8A7742_CLK_ZB3		14
+#define R8A7742_CLK_ZB3D2	15
+#define R8A7742_CLK_DDR		16
+#define R8A7742_CLK_SDH		17
+#define R8A7742_CLK_SD0		18
+#define R8A7742_CLK_SD1		19
+#define R8A7742_CLK_SD2		20
+#define R8A7742_CLK_SD3		21
+#define R8A7742_CLK_MMC0	22
+#define R8A7742_CLK_MMC1	23
+#define R8A7742_CLK_MP		24
+#define R8A7742_CLK_QSPI	25
+#define R8A7742_CLK_CP		26
+#define R8A7742_CLK_RCAN	27
+#define R8A7742_CLK_R		28
+#define R8A7742_CLK_OSC		29
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7742_CPG_MSSR_H__ */
diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h
index df59aaf5bf34..a93426f008ac 100644
--- a/include/dt-bindings/clock/tegra114-car.h
+++ b/include/dt-bindings/clock/tegra114-car.h
@@ -272,10 +272,10 @@
 #define TEGRA114_CLK_AUDIO3 242
 #define TEGRA114_CLK_AUDIO4 243
 #define TEGRA114_CLK_SPDIF 244
-#define TEGRA114_CLK_CLK_OUT_1 245
-#define TEGRA114_CLK_CLK_OUT_2 246
-#define TEGRA114_CLK_CLK_OUT_3 247
-#define TEGRA114_CLK_BLINK 248
+/* 245 */
+/* 246 */
+/* 247 */
+/* 248 */
 #define TEGRA114_CLK_OSC 249
 /* 250 */
 /* 251 */
@@ -335,9 +335,9 @@
 #define TEGRA114_CLK_AUDIO3_MUX 303
 #define TEGRA114_CLK_AUDIO4_MUX 304
 #define TEGRA114_CLK_SPDIF_MUX 305
-#define TEGRA114_CLK_CLK_OUT_1_MUX 306
-#define TEGRA114_CLK_CLK_OUT_2_MUX 307
-#define TEGRA114_CLK_CLK_OUT_3_MUX 308
+/* 306 */
+/* 307 */
+/* 308 */
 #define TEGRA114_CLK_DSIA_MUX 309
 #define TEGRA114_CLK_DSIB_MUX 310
 #define TEGRA114_CLK_XUSB_SS_DIV2 311
diff --git a/include/dt-bindings/clock/tegra124-car-common.h b/include/dt-bindings/clock/tegra124-car-common.h
index 2a9acd592bff..c59f9de01b4d 100644
--- a/include/dt-bindings/clock/tegra124-car-common.h
+++ b/include/dt-bindings/clock/tegra124-car-common.h
@@ -271,10 +271,10 @@
 #define TEGRA124_CLK_AUDIO3 242
 #define TEGRA124_CLK_AUDIO4 243
 #define TEGRA124_CLK_SPDIF 244
-#define TEGRA124_CLK_CLK_OUT_1 245
-#define TEGRA124_CLK_CLK_OUT_2 246
-#define TEGRA124_CLK_CLK_OUT_3 247
-#define TEGRA124_CLK_BLINK 248
+/* 245 */
+/* 246 */
+/* 247 */
+/* 248 */
 #define TEGRA124_CLK_OSC 249
 /* 250 */
 /* 251 */
@@ -334,9 +334,9 @@
 #define TEGRA124_CLK_AUDIO3_MUX 303
 #define TEGRA124_CLK_AUDIO4_MUX 304
 #define TEGRA124_CLK_SPDIF_MUX 305
-#define TEGRA124_CLK_CLK_OUT_1_MUX 306
-#define TEGRA124_CLK_CLK_OUT_2_MUX 307
-#define TEGRA124_CLK_CLK_OUT_3_MUX 308
+/* 306 */
+/* 307 */
+/* 308 */
 /* 309 */
 /* 310 */
 #define TEGRA124_CLK_SOR0_LVDS 311 /* deprecated */
diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h
index b21a0eb32921..fe541f627965 100644
--- a/include/dt-bindings/clock/tegra20-car.h
+++ b/include/dt-bindings/clock/tegra20-car.h
@@ -131,7 +131,7 @@
 #define TEGRA20_CLK_CCLK 108
 #define TEGRA20_CLK_HCLK 109
 #define TEGRA20_CLK_PCLK 110
-#define TEGRA20_CLK_BLINK 111
+/* 111 */
 #define TEGRA20_CLK_PLL_A 112
 #define TEGRA20_CLK_PLL_A_OUT0 113
 #define TEGRA20_CLK_PLL_C 114
diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
index 7a8f10b9a66d..7684a9f7613a 100644
--- a/include/dt-bindings/clock/tegra210-car.h
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -306,10 +306,10 @@
 #define TEGRA210_CLK_AUDIO3 274
 #define TEGRA210_CLK_AUDIO4 275
 #define TEGRA210_CLK_SPDIF 276
-#define TEGRA210_CLK_CLK_OUT_1 277
-#define TEGRA210_CLK_CLK_OUT_2 278
-#define TEGRA210_CLK_CLK_OUT_3 279
-#define TEGRA210_CLK_BLINK 280
+/* 277 */
+/* 278 */
+/* 279 */
+/* 280 */
 #define TEGRA210_CLK_SOR0_LVDS 281 /* deprecated */
 #define TEGRA210_CLK_SOR0_OUT 281
 #define TEGRA210_CLK_SOR1_OUT 282
@@ -351,8 +351,8 @@
 #define TEGRA210_CLK_PLL_P_OUT_XUSB 317
 #define TEGRA210_CLK_XUSB_SSP_SRC 318
 #define TEGRA210_CLK_PLL_RE_OUT1 319
-/* 320 */
-/* 321 */
+#define TEGRA210_CLK_PLL_MB_UD 320
+#define TEGRA210_CLK_PLL_P_UD 321
 #define TEGRA210_CLK_ISP 322
 #define TEGRA210_CLK_PLL_A_OUT_ADSP 323
 #define TEGRA210_CLK_PLL_A_OUT0_OUT_ADSP 324
@@ -388,9 +388,9 @@
 #define TEGRA210_CLK_AUDIO3_MUX 353
 #define TEGRA210_CLK_AUDIO4_MUX 354
 #define TEGRA210_CLK_SPDIF_MUX 355
-#define TEGRA210_CLK_CLK_OUT_1_MUX 356
-#define TEGRA210_CLK_CLK_OUT_2_MUX 357
-#define TEGRA210_CLK_CLK_OUT_3_MUX 358
+/* 356 */
+/* 357 */
+/* 358 */
 #define TEGRA210_CLK_DSIA_MUX 359
 #define TEGRA210_CLK_DSIB_MUX 360
 /* 361 */
diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h
index 7b542c10fc27..f193663e6f28 100644
--- a/include/dt-bindings/clock/tegra30-car.h
+++ b/include/dt-bindings/clock/tegra30-car.h
@@ -232,11 +232,11 @@
 #define TEGRA30_CLK_AUDIO3 204
 #define TEGRA30_CLK_AUDIO4 205
 #define TEGRA30_CLK_SPDIF 206
-#define TEGRA30_CLK_CLK_OUT_1 207 /* (extern1) */
-#define TEGRA30_CLK_CLK_OUT_2 208 /* (extern2) */
-#define TEGRA30_CLK_CLK_OUT_3 209 /* (extern3) */
+/* 207 */
+/* 208 */
+/* 209 */
 #define TEGRA30_CLK_SCLK 210
-#define TEGRA30_CLK_BLINK 211
+/* 211 */
 #define TEGRA30_CLK_CCLK_G 212
 #define TEGRA30_CLK_CCLK_LP 213
 #define TEGRA30_CLK_TWD 214
@@ -262,9 +262,9 @@
 /* 297 */
 /* 298 */
 /* 299 */
-#define TEGRA30_CLK_CLK_OUT_1_MUX 300
-#define TEGRA30_CLK_CLK_OUT_2_MUX 301
-#define TEGRA30_CLK_CLK_OUT_3_MUX 302
+/* 300 */
+/* 301 */
+/* 302 */
 #define TEGRA30_CLK_AUDIO0_MUX 303
 #define TEGRA30_CLK_AUDIO1_MUX 304
 #define TEGRA30_CLK_AUDIO2_MUX 305
diff --git a/include/dt-bindings/pinctrl/pads-imx8dxl.h b/include/dt-bindings/pinctrl/pads-imx8dxl.h
new file mode 100644
index 000000000000..b1d7b84c3e0a
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pads-imx8dxl.h
@@ -0,0 +1,639 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019~2020 NXP
+ */
+
+#ifndef _IMX8DXL_PADS_H
+#define _IMX8DXL_PADS_H
+
+/* pin id */
+#define IMX8DXL_PCIE_CTRL0_PERST_B                  0
+#define IMX8DXL_PCIE_CTRL0_CLKREQ_B                 1
+#define IMX8DXL_PCIE_CTRL0_WAKE_B                   2
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_PCIESEP       3
+#define IMX8DXL_USB_SS3_TC0                         4
+#define IMX8DXL_USB_SS3_TC1                         5
+#define IMX8DXL_USB_SS3_TC2                         6
+#define IMX8DXL_USB_SS3_TC3                         7
+#define IMX8DXL_COMP_CTL_GPIO_3V3_USB3IO            8
+#define IMX8DXL_EMMC0_CLK                           9
+#define IMX8DXL_EMMC0_CMD                           10
+#define IMX8DXL_EMMC0_DATA0                         11
+#define IMX8DXL_EMMC0_DATA1                         12
+#define IMX8DXL_EMMC0_DATA2                         13
+#define IMX8DXL_EMMC0_DATA3                         14
+#define IMX8DXL_EMMC0_DATA4                         15
+#define IMX8DXL_EMMC0_DATA5                         16
+#define IMX8DXL_EMMC0_DATA6                         17
+#define IMX8DXL_EMMC0_DATA7                         18
+#define IMX8DXL_EMMC0_STROBE                        19
+#define IMX8DXL_EMMC0_RESET_B                       20
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_SD1FIX0       21
+#define IMX8DXL_USDHC1_RESET_B                      22
+#define IMX8DXL_USDHC1_VSELECT                      23
+#define IMX8DXL_CTL_NAND_RE_P_N                     24
+#define IMX8DXL_USDHC1_WP                           25
+#define IMX8DXL_USDHC1_CD_B                         26
+#define IMX8DXL_CTL_NAND_DQS_P_N                    27
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_VSELSEP       28
+#define IMX8DXL_ENET0_RGMII_TXC                     29
+#define IMX8DXL_ENET0_RGMII_TX_CTL                  30
+#define IMX8DXL_ENET0_RGMII_TXD0                    31
+#define IMX8DXL_ENET0_RGMII_TXD1                    32
+#define IMX8DXL_ENET0_RGMII_TXD2                    33
+#define IMX8DXL_ENET0_RGMII_TXD3                    34
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0   35
+#define IMX8DXL_ENET0_RGMII_RXC                     36
+#define IMX8DXL_ENET0_RGMII_RX_CTL                  37
+#define IMX8DXL_ENET0_RGMII_RXD0                    38
+#define IMX8DXL_ENET0_RGMII_RXD1                    39
+#define IMX8DXL_ENET0_RGMII_RXD2                    40
+#define IMX8DXL_ENET0_RGMII_RXD3                    41
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1   42
+#define IMX8DXL_ENET0_REFCLK_125M_25M               43
+#define IMX8DXL_ENET0_MDIO                          44
+#define IMX8DXL_ENET0_MDC                           45
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIOCT        46
+#define IMX8DXL_ENET1_RGMII_TXC                     47
+#define IMX8DXL_ENET1_RGMII_TXD2                    48
+#define IMX8DXL_ENET1_RGMII_TX_CTL                  49
+#define IMX8DXL_ENET1_RGMII_TXD3                    50
+#define IMX8DXL_ENET1_RGMII_RXC                     51
+#define IMX8DXL_ENET1_RGMII_RXD3                    52
+#define IMX8DXL_ENET1_RGMII_RXD2                    53
+#define IMX8DXL_ENET1_RGMII_RXD1                    54
+#define IMX8DXL_ENET1_RGMII_TXD0                    55
+#define IMX8DXL_ENET1_RGMII_TXD1                    56
+#define IMX8DXL_ENET1_RGMII_RXD0                    57
+#define IMX8DXL_ENET1_RGMII_RX_CTL                  58
+#define IMX8DXL_ENET1_REFCLK_125M_25M               59
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB       60
+#define IMX8DXL_SPI3_SCK                            61
+#define IMX8DXL_SPI3_SDO                            62
+#define IMX8DXL_SPI3_SDI                            63
+#define IMX8DXL_SPI3_CS0                            64
+#define IMX8DXL_SPI3_CS1                            65
+#define IMX8DXL_MCLK_IN1                            66
+#define IMX8DXL_MCLK_IN0                            67
+#define IMX8DXL_MCLK_OUT0                           68
+#define IMX8DXL_UART1_TX                            69
+#define IMX8DXL_UART1_RX                            70
+#define IMX8DXL_UART1_RTS_B                         71
+#define IMX8DXL_UART1_CTS_B                         72
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK       73
+#define IMX8DXL_SPI0_SCK                            74
+#define IMX8DXL_SPI0_SDI                            75
+#define IMX8DXL_SPI0_SDO                            76
+#define IMX8DXL_SPI0_CS1                            77
+#define IMX8DXL_SPI0_CS0                            78
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHT       79
+#define IMX8DXL_ADC_IN1                             80
+#define IMX8DXL_ADC_IN0                             81
+#define IMX8DXL_ADC_IN3                             82
+#define IMX8DXL_ADC_IN2                             83
+#define IMX8DXL_ADC_IN5                             84
+#define IMX8DXL_ADC_IN4                             85
+#define IMX8DXL_FLEXCAN0_RX                         86
+#define IMX8DXL_FLEXCAN0_TX                         87
+#define IMX8DXL_FLEXCAN1_RX                         88
+#define IMX8DXL_FLEXCAN1_TX                         89
+#define IMX8DXL_FLEXCAN2_RX                         90
+#define IMX8DXL_FLEXCAN2_TX                         91
+#define IMX8DXL_UART0_RX                            92
+#define IMX8DXL_UART0_TX                            93
+#define IMX8DXL_UART2_TX                            94
+#define IMX8DXL_UART2_RX                            95
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIOLH        96
+#define IMX8DXL_JTAG_TRST_B                         97
+#define IMX8DXL_PMIC_I2C_SCL                        98
+#define IMX8DXL_PMIC_I2C_SDA                        99
+#define IMX8DXL_PMIC_INT_B                          100
+#define IMX8DXL_SCU_GPIO0_00                        101
+#define IMX8DXL_SCU_GPIO0_01                        102
+#define IMX8DXL_SCU_PMIC_STANDBY                    103
+#define IMX8DXL_SCU_BOOT_MODE1                      104
+#define IMX8DXL_SCU_BOOT_MODE0                      105
+#define IMX8DXL_SCU_BOOT_MODE2                      106
+#define IMX8DXL_SNVS_TAMPER_OUT1                    107
+#define IMX8DXL_SNVS_TAMPER_OUT2                    108
+#define IMX8DXL_SNVS_TAMPER_OUT3                    109
+#define IMX8DXL_SNVS_TAMPER_OUT4                    110
+#define IMX8DXL_SNVS_TAMPER_IN0                     111
+#define IMX8DXL_SNVS_TAMPER_IN1                     112
+#define IMX8DXL_SNVS_TAMPER_IN2                     113
+#define IMX8DXL_SNVS_TAMPER_IN3                     114
+#define IMX8DXL_SPI1_SCK                            115
+#define IMX8DXL_SPI1_SDO                            116
+#define IMX8DXL_SPI1_SDI                            117
+#define IMX8DXL_SPI1_CS0                            118
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHD       119
+#define IMX8DXL_QSPI0A_DATA1                        120
+#define IMX8DXL_QSPI0A_DATA0                        121
+#define IMX8DXL_QSPI0A_DATA3                        122
+#define IMX8DXL_QSPI0A_DATA2                        123
+#define IMX8DXL_QSPI0A_SS0_B                        124
+#define IMX8DXL_QSPI0A_DQS                          125
+#define IMX8DXL_QSPI0A_SCLK                         126
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_QSPI0A        127
+#define IMX8DXL_QSPI0B_SCLK                         128
+#define IMX8DXL_QSPI0B_DQS                          129
+#define IMX8DXL_QSPI0B_DATA1                        130
+#define IMX8DXL_QSPI0B_DATA0                        131
+#define IMX8DXL_QSPI0B_DATA3                        132
+#define IMX8DXL_QSPI0B_DATA2                        133
+#define IMX8DXL_QSPI0B_SS0_B                        134
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_QSPI0B        135
+
+/* format: <pin_id mux_mode> */
+#define IMX8DXL_PCIE_CTRL0_PERST_B_HSIO_PCIE0_PERST_B              IMX8DXL_PCIE_CTRL0_PERST_B            0
+#define IMX8DXL_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00                 IMX8DXL_PCIE_CTRL0_PERST_B            4
+#define IMX8DXL_PCIE_CTRL0_PERST_B_LSIO_GPIO7_IO00                 IMX8DXL_PCIE_CTRL0_PERST_B            5
+#define IMX8DXL_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B            IMX8DXL_PCIE_CTRL0_CLKREQ_B           0
+#define IMX8DXL_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01                IMX8DXL_PCIE_CTRL0_CLKREQ_B           4
+#define IMX8DXL_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO7_IO01                IMX8DXL_PCIE_CTRL0_CLKREQ_B           5
+#define IMX8DXL_PCIE_CTRL0_WAKE_B_HSIO_PCIE0_WAKE_B                IMX8DXL_PCIE_CTRL0_WAKE_B             0
+#define IMX8DXL_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02                  IMX8DXL_PCIE_CTRL0_WAKE_B             4
+#define IMX8DXL_PCIE_CTRL0_WAKE_B_LSIO_GPIO7_IO02                  IMX8DXL_PCIE_CTRL0_WAKE_B             5
+#define IMX8DXL_USB_SS3_TC0_ADMA_I2C1_SCL                          IMX8DXL_USB_SS3_TC0                   0
+#define IMX8DXL_USB_SS3_TC0_CONN_USB_OTG1_PWR                      IMX8DXL_USB_SS3_TC0                   1
+#define IMX8DXL_USB_SS3_TC0_CONN_USB_OTG2_PWR                      IMX8DXL_USB_SS3_TC0                   2
+#define IMX8DXL_USB_SS3_TC0_LSIO_GPIO4_IO03                        IMX8DXL_USB_SS3_TC0                   4
+#define IMX8DXL_USB_SS3_TC0_LSIO_GPIO7_IO03                        IMX8DXL_USB_SS3_TC0                   5
+#define IMX8DXL_USB_SS3_TC1_ADMA_I2C1_SCL                          IMX8DXL_USB_SS3_TC1                   0
+#define IMX8DXL_USB_SS3_TC1_CONN_USB_OTG2_PWR                      IMX8DXL_USB_SS3_TC1                   1
+#define IMX8DXL_USB_SS3_TC1_LSIO_GPIO4_IO04                        IMX8DXL_USB_SS3_TC1                   4
+#define IMX8DXL_USB_SS3_TC1_LSIO_GPIO7_IO04                        IMX8DXL_USB_SS3_TC1                   5
+#define IMX8DXL_USB_SS3_TC2_ADMA_I2C1_SDA                          IMX8DXL_USB_SS3_TC2                   0
+#define IMX8DXL_USB_SS3_TC2_CONN_USB_OTG1_OC                       IMX8DXL_USB_SS3_TC2                   1
+#define IMX8DXL_USB_SS3_TC2_CONN_USB_OTG2_OC                       IMX8DXL_USB_SS3_TC2                   2
+#define IMX8DXL_USB_SS3_TC2_LSIO_GPIO4_IO05                        IMX8DXL_USB_SS3_TC2                   4
+#define IMX8DXL_USB_SS3_TC2_LSIO_GPIO7_IO05                        IMX8DXL_USB_SS3_TC2                   5
+#define IMX8DXL_USB_SS3_TC3_ADMA_I2C1_SDA                          IMX8DXL_USB_SS3_TC3                   0
+#define IMX8DXL_USB_SS3_TC3_CONN_USB_OTG2_OC                       IMX8DXL_USB_SS3_TC3                   1
+#define IMX8DXL_USB_SS3_TC3_LSIO_GPIO4_IO06                        IMX8DXL_USB_SS3_TC3                   4
+#define IMX8DXL_USB_SS3_TC3_LSIO_GPIO7_IO06                        IMX8DXL_USB_SS3_TC3                   5
+#define IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK                           IMX8DXL_EMMC0_CLK                     0
+#define IMX8DXL_EMMC0_CLK_CONN_NAND_READY_B                        IMX8DXL_EMMC0_CLK                     1
+#define IMX8DXL_EMMC0_CLK_LSIO_GPIO4_IO07                          IMX8DXL_EMMC0_CLK                     4
+#define IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD                           IMX8DXL_EMMC0_CMD                     0
+#define IMX8DXL_EMMC0_CMD_CONN_NAND_DQS                            IMX8DXL_EMMC0_CMD                     1
+#define IMX8DXL_EMMC0_CMD_LSIO_GPIO4_IO08                          IMX8DXL_EMMC0_CMD                     4
+#define IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0                       IMX8DXL_EMMC0_DATA0                   0
+#define IMX8DXL_EMMC0_DATA0_CONN_NAND_DATA00                       IMX8DXL_EMMC0_DATA0                   1
+#define IMX8DXL_EMMC0_DATA0_LSIO_GPIO4_IO09                        IMX8DXL_EMMC0_DATA0                   4
+#define IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1                       IMX8DXL_EMMC0_DATA1                   0
+#define IMX8DXL_EMMC0_DATA1_CONN_NAND_DATA01                       IMX8DXL_EMMC0_DATA1                   1
+#define IMX8DXL_EMMC0_DATA1_LSIO_GPIO4_IO10                        IMX8DXL_EMMC0_DATA1                   4
+#define IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2                       IMX8DXL_EMMC0_DATA2                   0
+#define IMX8DXL_EMMC0_DATA2_CONN_NAND_DATA02                       IMX8DXL_EMMC0_DATA2                   1
+#define IMX8DXL_EMMC0_DATA2_LSIO_GPIO4_IO11                        IMX8DXL_EMMC0_DATA2                   4
+#define IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3                       IMX8DXL_EMMC0_DATA3                   0
+#define IMX8DXL_EMMC0_DATA3_CONN_NAND_DATA03                       IMX8DXL_EMMC0_DATA3                   1
+#define IMX8DXL_EMMC0_DATA3_LSIO_GPIO4_IO12                        IMX8DXL_EMMC0_DATA3                   4
+#define IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4                       IMX8DXL_EMMC0_DATA4                   0
+#define IMX8DXL_EMMC0_DATA4_CONN_NAND_DATA04                       IMX8DXL_EMMC0_DATA4                   1
+#define IMX8DXL_EMMC0_DATA4_LSIO_GPIO4_IO13                        IMX8DXL_EMMC0_DATA4                   4
+#define IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5                       IMX8DXL_EMMC0_DATA5                   0
+#define IMX8DXL_EMMC0_DATA5_CONN_NAND_DATA05                       IMX8DXL_EMMC0_DATA5                   1
+#define IMX8DXL_EMMC0_DATA5_LSIO_GPIO4_IO14                        IMX8DXL_EMMC0_DATA5                   4
+#define IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6                       IMX8DXL_EMMC0_DATA6                   0
+#define IMX8DXL_EMMC0_DATA6_CONN_NAND_DATA06                       IMX8DXL_EMMC0_DATA6                   1
+#define IMX8DXL_EMMC0_DATA6_LSIO_GPIO4_IO15                        IMX8DXL_EMMC0_DATA6                   4
+#define IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7                       IMX8DXL_EMMC0_DATA7                   0
+#define IMX8DXL_EMMC0_DATA7_CONN_NAND_DATA07                       IMX8DXL_EMMC0_DATA7                   1
+#define IMX8DXL_EMMC0_DATA7_LSIO_GPIO4_IO16                        IMX8DXL_EMMC0_DATA7                   4
+#define IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE                     IMX8DXL_EMMC0_STROBE                  0
+#define IMX8DXL_EMMC0_STROBE_CONN_NAND_CLE                         IMX8DXL_EMMC0_STROBE                  1
+#define IMX8DXL_EMMC0_STROBE_LSIO_GPIO4_IO17                       IMX8DXL_EMMC0_STROBE                  4
+#define IMX8DXL_EMMC0_RESET_B_CONN_EMMC0_RESET_B                   IMX8DXL_EMMC0_RESET_B                 0
+#define IMX8DXL_EMMC0_RESET_B_CONN_NAND_WP_B                       IMX8DXL_EMMC0_RESET_B                 1
+#define IMX8DXL_EMMC0_RESET_B_LSIO_GPIO4_IO18                      IMX8DXL_EMMC0_RESET_B                 4
+#define IMX8DXL_USDHC1_RESET_B_CONN_USDHC1_RESET_B                 IMX8DXL_USDHC1_RESET_B                0
+#define IMX8DXL_USDHC1_RESET_B_CONN_NAND_RE_N                      IMX8DXL_USDHC1_RESET_B                1
+#define IMX8DXL_USDHC1_RESET_B_ADMA_SPI2_SCK                       IMX8DXL_USDHC1_RESET_B                2
+#define IMX8DXL_USDHC1_RESET_B_CONN_NAND_WE_B                      IMX8DXL_USDHC1_RESET_B                3
+#define IMX8DXL_USDHC1_RESET_B_LSIO_GPIO4_IO19                     IMX8DXL_USDHC1_RESET_B                4
+#define IMX8DXL_USDHC1_RESET_B_LSIO_GPIO7_IO08                     IMX8DXL_USDHC1_RESET_B                5
+#define IMX8DXL_USDHC1_VSELECT_CONN_USDHC1_VSELECT                 IMX8DXL_USDHC1_VSELECT                0
+#define IMX8DXL_USDHC1_VSELECT_CONN_NAND_RE_P                      IMX8DXL_USDHC1_VSELECT                1
+#define IMX8DXL_USDHC1_VSELECT_ADMA_SPI2_SDO                       IMX8DXL_USDHC1_VSELECT                2
+#define IMX8DXL_USDHC1_VSELECT_CONN_NAND_RE_B                      IMX8DXL_USDHC1_VSELECT                3
+#define IMX8DXL_USDHC1_VSELECT_LSIO_GPIO4_IO20                     IMX8DXL_USDHC1_VSELECT                4
+#define IMX8DXL_USDHC1_VSELECT_LSIO_GPIO7_IO09                     IMX8DXL_USDHC1_VSELECT                5
+#define IMX8DXL_USDHC1_WP_CONN_USDHC1_WP                           IMX8DXL_USDHC1_WP                     0
+#define IMX8DXL_USDHC1_WP_CONN_NAND_DQS_N                          IMX8DXL_USDHC1_WP                     1
+#define IMX8DXL_USDHC1_WP_ADMA_SPI2_SDI                            IMX8DXL_USDHC1_WP                     2
+#define IMX8DXL_USDHC1_WP_CONN_NAND_ALE                            IMX8DXL_USDHC1_WP                     3
+#define IMX8DXL_USDHC1_WP_LSIO_GPIO4_IO21                          IMX8DXL_USDHC1_WP                     4
+#define IMX8DXL_USDHC1_WP_LSIO_GPIO7_IO10                          IMX8DXL_USDHC1_WP                     5
+#define IMX8DXL_USDHC1_CD_B_CONN_USDHC1_CD_B                       IMX8DXL_USDHC1_CD_B                   0
+#define IMX8DXL_USDHC1_CD_B_CONN_NAND_DQS_P                        IMX8DXL_USDHC1_CD_B                   1
+#define IMX8DXL_USDHC1_CD_B_ADMA_SPI2_CS0                          IMX8DXL_USDHC1_CD_B                   2
+#define IMX8DXL_USDHC1_CD_B_CONN_NAND_DQS                          IMX8DXL_USDHC1_CD_B                   3
+#define IMX8DXL_USDHC1_CD_B_LSIO_GPIO4_IO22                        IMX8DXL_USDHC1_CD_B                   4
+#define IMX8DXL_USDHC1_CD_B_LSIO_GPIO7_IO11                        IMX8DXL_USDHC1_CD_B                   5
+#define IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC               IMX8DXL_ENET0_RGMII_TXC               0
+#define IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT             IMX8DXL_ENET0_RGMII_TXC               1
+#define IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_IN              IMX8DXL_ENET0_RGMII_TXC               2
+#define IMX8DXL_ENET0_RGMII_TXC_CONN_NAND_CE1_B                    IMX8DXL_ENET0_RGMII_TXC               3
+#define IMX8DXL_ENET0_RGMII_TXC_LSIO_GPIO4_IO29                    IMX8DXL_ENET0_RGMII_TXC               4
+#define IMX8DXL_ENET0_RGMII_TXC_CONN_USDHC2_CLK                    IMX8DXL_ENET0_RGMII_TXC               5
+#define IMX8DXL_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL         IMX8DXL_ENET0_RGMII_TX_CTL            0
+#define IMX8DXL_ENET0_RGMII_TX_CTL_CONN_USDHC1_RESET_B             IMX8DXL_ENET0_RGMII_TX_CTL            3
+#define IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30                 IMX8DXL_ENET0_RGMII_TX_CTL            4
+#define IMX8DXL_ENET0_RGMII_TX_CTL_CONN_USDHC2_CMD                 IMX8DXL_ENET0_RGMII_TX_CTL            5
+#define IMX8DXL_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0             IMX8DXL_ENET0_RGMII_TXD0              0
+#define IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT               IMX8DXL_ENET0_RGMII_TXD0              3
+#define IMX8DXL_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31                   IMX8DXL_ENET0_RGMII_TXD0              4
+#define IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC2_DATA0                 IMX8DXL_ENET0_RGMII_TXD0              5
+#define IMX8DXL_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1             IMX8DXL_ENET0_RGMII_TXD1              0
+#define IMX8DXL_ENET0_RGMII_TXD1_CONN_USDHC1_WP                    IMX8DXL_ENET0_RGMII_TXD1              3
+#define IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00                   IMX8DXL_ENET0_RGMII_TXD1              4
+#define IMX8DXL_ENET0_RGMII_TXD1_CONN_USDHC2_DATA1                 IMX8DXL_ENET0_RGMII_TXD1              5
+#define IMX8DXL_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2             IMX8DXL_ENET0_RGMII_TXD2              0
+#define IMX8DXL_ENET0_RGMII_TXD2_CONN_NAND_CE0_B                   IMX8DXL_ENET0_RGMII_TXD2              2
+#define IMX8DXL_ENET0_RGMII_TXD2_CONN_USDHC1_CD_B                  IMX8DXL_ENET0_RGMII_TXD2              3
+#define IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01                   IMX8DXL_ENET0_RGMII_TXD2              4
+#define IMX8DXL_ENET0_RGMII_TXD2_CONN_USDHC2_DATA2                 IMX8DXL_ENET0_RGMII_TXD2              5
+#define IMX8DXL_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3             IMX8DXL_ENET0_RGMII_TXD3              0
+#define IMX8DXL_ENET0_RGMII_TXD3_CONN_NAND_RE_B                    IMX8DXL_ENET0_RGMII_TXD3              2
+#define IMX8DXL_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02                   IMX8DXL_ENET0_RGMII_TXD3              4
+#define IMX8DXL_ENET0_RGMII_TXD3_CONN_USDHC2_DATA3                 IMX8DXL_ENET0_RGMII_TXD3              5
+#define IMX8DXL_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC               IMX8DXL_ENET0_RGMII_RXC               0
+#define IMX8DXL_ENET0_RGMII_RXC_CONN_NAND_WE_B                     IMX8DXL_ENET0_RGMII_RXC               2
+#define IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK                    IMX8DXL_ENET0_RGMII_RXC               3
+#define IMX8DXL_ENET0_RGMII_RXC_LSIO_GPIO5_IO03                    IMX8DXL_ENET0_RGMII_RXC               4
+#define IMX8DXL_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL         IMX8DXL_ENET0_RGMII_RX_CTL            0
+#define IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD                 IMX8DXL_ENET0_RGMII_RX_CTL            3
+#define IMX8DXL_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04                 IMX8DXL_ENET0_RGMII_RX_CTL            4
+#define IMX8DXL_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0             IMX8DXL_ENET0_RGMII_RXD0              0
+#define IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0                 IMX8DXL_ENET0_RGMII_RXD0              3
+#define IMX8DXL_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05                   IMX8DXL_ENET0_RGMII_RXD0              4
+#define IMX8DXL_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1             IMX8DXL_ENET0_RGMII_RXD1              0
+#define IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1                 IMX8DXL_ENET0_RGMII_RXD1              3
+#define IMX8DXL_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06                   IMX8DXL_ENET0_RGMII_RXD1              4
+#define IMX8DXL_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2             IMX8DXL_ENET0_RGMII_RXD2              0
+#define IMX8DXL_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER             IMX8DXL_ENET0_RGMII_RXD2              1
+#define IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2                 IMX8DXL_ENET0_RGMII_RXD2              3
+#define IMX8DXL_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07                   IMX8DXL_ENET0_RGMII_RXD2              4
+#define IMX8DXL_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3             IMX8DXL_ENET0_RGMII_RXD3              0
+#define IMX8DXL_ENET0_RGMII_RXD3_CONN_NAND_ALE                     IMX8DXL_ENET0_RGMII_RXD3              2
+#define IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3                 IMX8DXL_ENET0_RGMII_RXD3              3
+#define IMX8DXL_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08                   IMX8DXL_ENET0_RGMII_RXD3              4
+#define IMX8DXL_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M   IMX8DXL_ENET0_REFCLK_125M_25M         0
+#define IMX8DXL_ENET0_REFCLK_125M_25M_CONN_ENET0_PPS               IMX8DXL_ENET0_REFCLK_125M_25M         1
+#define IMX8DXL_ENET0_REFCLK_125M_25M_CONN_EQOS_PPS_IN             IMX8DXL_ENET0_REFCLK_125M_25M         2
+#define IMX8DXL_ENET0_REFCLK_125M_25M_CONN_EQOS_PPS_OUT            IMX8DXL_ENET0_REFCLK_125M_25M         3
+#define IMX8DXL_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09              IMX8DXL_ENET0_REFCLK_125M_25M         4
+#define IMX8DXL_ENET0_MDIO_CONN_ENET0_MDIO                         IMX8DXL_ENET0_MDIO                    0
+#define IMX8DXL_ENET0_MDIO_ADMA_I2C3_SDA                           IMX8DXL_ENET0_MDIO                    1
+#define IMX8DXL_ENET0_MDIO_CONN_EQOS_MDIO                          IMX8DXL_ENET0_MDIO                    2
+#define IMX8DXL_ENET0_MDIO_LSIO_GPIO5_IO10                         IMX8DXL_ENET0_MDIO                    4
+#define IMX8DXL_ENET0_MDIO_LSIO_GPIO7_IO16                         IMX8DXL_ENET0_MDIO                    5
+#define IMX8DXL_ENET0_MDC_CONN_ENET0_MDC                           IMX8DXL_ENET0_MDC                     0
+#define IMX8DXL_ENET0_MDC_ADMA_I2C3_SCL                            IMX8DXL_ENET0_MDC                     1
+#define IMX8DXL_ENET0_MDC_CONN_EQOS_MDC                            IMX8DXL_ENET0_MDC                     2
+#define IMX8DXL_ENET0_MDC_LSIO_GPIO5_IO11                          IMX8DXL_ENET0_MDC                     4
+#define IMX8DXL_ENET0_MDC_LSIO_GPIO7_IO17                          IMX8DXL_ENET0_MDC                     5
+#define IMX8DXL_ENET1_RGMII_TXC_LSIO_GPIO0_IO00                    IMX8DXL_ENET1_RGMII_TXC               0
+#define IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RCLK50M_OUT              IMX8DXL_ENET1_RGMII_TXC               1
+#define IMX8DXL_ENET1_RGMII_TXC_ADMA_LCDIF_D00                     IMX8DXL_ENET1_RGMII_TXC               2
+#define IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RGMII_TXC                IMX8DXL_ENET1_RGMII_TXC               3
+#define IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RCLK50M_IN               IMX8DXL_ENET1_RGMII_TXC               4
+#define IMX8DXL_ENET1_RGMII_TXD2_ADMA_LCDIF_D01                    IMX8DXL_ENET1_RGMII_TXD2              2
+#define IMX8DXL_ENET1_RGMII_TXD2_CONN_EQOS_RGMII_TXD2              IMX8DXL_ENET1_RGMII_TXD2              3
+#define IMX8DXL_ENET1_RGMII_TXD2_LSIO_GPIO0_IO01                   IMX8DXL_ENET1_RGMII_TXD2              4
+#define IMX8DXL_ENET1_RGMII_TX_CTL_ADMA_LCDIF_D02                  IMX8DXL_ENET1_RGMII_TX_CTL            2
+#define IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL          IMX8DXL_ENET1_RGMII_TX_CTL            3
+#define IMX8DXL_ENET1_RGMII_TX_CTL_LSIO_GPIO0_IO02                 IMX8DXL_ENET1_RGMII_TX_CTL            4
+#define IMX8DXL_ENET1_RGMII_TXD3_ADMA_LCDIF_D03                    IMX8DXL_ENET1_RGMII_TXD3              2
+#define IMX8DXL_ENET1_RGMII_TXD3_CONN_EQOS_RGMII_TXD3              IMX8DXL_ENET1_RGMII_TXD3              3
+#define IMX8DXL_ENET1_RGMII_TXD3_LSIO_GPIO0_IO03                   IMX8DXL_ENET1_RGMII_TXD3              4
+#define IMX8DXL_ENET1_RGMII_RXC_ADMA_LCDIF_D04                     IMX8DXL_ENET1_RGMII_RXC               2
+#define IMX8DXL_ENET1_RGMII_RXC_CONN_EQOS_RGMII_RXC                IMX8DXL_ENET1_RGMII_RXC               3
+#define IMX8DXL_ENET1_RGMII_RXC_LSIO_GPIO0_IO04                    IMX8DXL_ENET1_RGMII_RXC               4
+#define IMX8DXL_ENET1_RGMII_RXD3_ADMA_LCDIF_D05                    IMX8DXL_ENET1_RGMII_RXD3              2
+#define IMX8DXL_ENET1_RGMII_RXD3_CONN_EQOS_RGMII_RXD3              IMX8DXL_ENET1_RGMII_RXD3              3
+#define IMX8DXL_ENET1_RGMII_RXD3_LSIO_GPIO0_IO05                   IMX8DXL_ENET1_RGMII_RXD3              4
+#define IMX8DXL_ENET1_RGMII_RXD2_ADMA_LCDIF_D06                    IMX8DXL_ENET1_RGMII_RXD2              2
+#define IMX8DXL_ENET1_RGMII_RXD2_CONN_EQOS_RGMII_RXD2              IMX8DXL_ENET1_RGMII_RXD2              3
+#define IMX8DXL_ENET1_RGMII_RXD2_LSIO_GPIO0_IO06                   IMX8DXL_ENET1_RGMII_RXD2              4
+#define IMX8DXL_ENET1_RGMII_RXD2_LSIO_GPIO6_IO00                   IMX8DXL_ENET1_RGMII_RXD2              5
+#define IMX8DXL_ENET1_RGMII_RXD1_ADMA_LCDIF_D07                    IMX8DXL_ENET1_RGMII_RXD1              2
+#define IMX8DXL_ENET1_RGMII_RXD1_CONN_EQOS_RGMII_RXD1              IMX8DXL_ENET1_RGMII_RXD1              3
+#define IMX8DXL_ENET1_RGMII_RXD1_LSIO_GPIO0_IO07                   IMX8DXL_ENET1_RGMII_RXD1              4
+#define IMX8DXL_ENET1_RGMII_RXD1_LSIO_GPIO6_IO01                   IMX8DXL_ENET1_RGMII_RXD1              5
+#define IMX8DXL_ENET1_RGMII_TXD0_ADMA_LCDIF_D08                    IMX8DXL_ENET1_RGMII_TXD0              2
+#define IMX8DXL_ENET1_RGMII_TXD0_CONN_EQOS_RGMII_TXD0              IMX8DXL_ENET1_RGMII_TXD0              3
+#define IMX8DXL_ENET1_RGMII_TXD0_LSIO_GPIO0_IO08                   IMX8DXL_ENET1_RGMII_TXD0              4
+#define IMX8DXL_ENET1_RGMII_TXD0_LSIO_GPIO6_IO02                   IMX8DXL_ENET1_RGMII_TXD0              5
+#define IMX8DXL_ENET1_RGMII_TXD1_ADMA_LCDIF_D09                    IMX8DXL_ENET1_RGMII_TXD1              2
+#define IMX8DXL_ENET1_RGMII_TXD1_CONN_EQOS_RGMII_TXD1              IMX8DXL_ENET1_RGMII_TXD1              3
+#define IMX8DXL_ENET1_RGMII_TXD1_LSIO_GPIO0_IO09                   IMX8DXL_ENET1_RGMII_TXD1              4
+#define IMX8DXL_ENET1_RGMII_TXD1_LSIO_GPIO6_IO03                   IMX8DXL_ENET1_RGMII_TXD1              5
+#define IMX8DXL_ENET1_RGMII_RXD0_ADMA_SPDIF0_RX                    IMX8DXL_ENET1_RGMII_RXD0              0
+#define IMX8DXL_ENET1_RGMII_RXD0_ADMA_MQS_R                        IMX8DXL_ENET1_RGMII_RXD0              1
+#define IMX8DXL_ENET1_RGMII_RXD0_ADMA_LCDIF_D10                    IMX8DXL_ENET1_RGMII_RXD0              2
+#define IMX8DXL_ENET1_RGMII_RXD0_CONN_EQOS_RGMII_RXD0              IMX8DXL_ENET1_RGMII_RXD0              3
+#define IMX8DXL_ENET1_RGMII_RXD0_LSIO_GPIO0_IO10                   IMX8DXL_ENET1_RGMII_RXD0              4
+#define IMX8DXL_ENET1_RGMII_RXD0_LSIO_GPIO6_IO04                   IMX8DXL_ENET1_RGMII_RXD0              5
+#define IMX8DXL_ENET1_RGMII_RX_CTL_ADMA_SPDIF0_TX                  IMX8DXL_ENET1_RGMII_RX_CTL            0
+#define IMX8DXL_ENET1_RGMII_RX_CTL_ADMA_MQS_L                      IMX8DXL_ENET1_RGMII_RX_CTL            1
+#define IMX8DXL_ENET1_RGMII_RX_CTL_ADMA_LCDIF_D11                  IMX8DXL_ENET1_RGMII_RX_CTL            2
+#define IMX8DXL_ENET1_RGMII_RX_CTL_CONN_EQOS_RGMII_RX_CTL          IMX8DXL_ENET1_RGMII_RX_CTL            3
+#define IMX8DXL_ENET1_RGMII_RX_CTL_LSIO_GPIO0_IO11                 IMX8DXL_ENET1_RGMII_RX_CTL            4
+#define IMX8DXL_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO05                 IMX8DXL_ENET1_RGMII_RX_CTL            5
+#define IMX8DXL_ENET1_REFCLK_125M_25M_ADMA_SPDIF0_EXT_CLK          IMX8DXL_ENET1_REFCLK_125M_25M         0
+#define IMX8DXL_ENET1_REFCLK_125M_25M_ADMA_LCDIF_D12               IMX8DXL_ENET1_REFCLK_125M_25M         2
+#define IMX8DXL_ENET1_REFCLK_125M_25M_CONN_EQOS_REFCLK_125M_25M    IMX8DXL_ENET1_REFCLK_125M_25M         3
+#define IMX8DXL_ENET1_REFCLK_125M_25M_LSIO_GPIO0_IO12              IMX8DXL_ENET1_REFCLK_125M_25M         4
+#define IMX8DXL_ENET1_REFCLK_125M_25M_LSIO_GPIO6_IO06              IMX8DXL_ENET1_REFCLK_125M_25M         5
+#define IMX8DXL_SPI3_SCK_ADMA_SPI3_SCK                             IMX8DXL_SPI3_SCK                      0
+#define IMX8DXL_SPI3_SCK_ADMA_LCDIF_D13                            IMX8DXL_SPI3_SCK                      2
+#define IMX8DXL_SPI3_SCK_LSIO_GPIO0_IO13                           IMX8DXL_SPI3_SCK                      4
+#define IMX8DXL_SPI3_SCK_ADMA_LCDIF_D00                            IMX8DXL_SPI3_SCK                      5
+#define IMX8DXL_SPI3_SDO_ADMA_SPI3_SDO                             IMX8DXL_SPI3_SDO                      0
+#define IMX8DXL_SPI3_SDO_ADMA_LCDIF_D14                            IMX8DXL_SPI3_SDO                      2
+#define IMX8DXL_SPI3_SDO_LSIO_GPIO0_IO14                           IMX8DXL_SPI3_SDO                      4
+#define IMX8DXL_SPI3_SDO_ADMA_LCDIF_D01                            IMX8DXL_SPI3_SDO                      5
+#define IMX8DXL_SPI3_SDI_ADMA_SPI3_SDI                             IMX8DXL_SPI3_SDI                      0
+#define IMX8DXL_SPI3_SDI_ADMA_LCDIF_D15                            IMX8DXL_SPI3_SDI                      2
+#define IMX8DXL_SPI3_SDI_LSIO_GPIO0_IO15                           IMX8DXL_SPI3_SDI                      4
+#define IMX8DXL_SPI3_SDI_ADMA_LCDIF_D02                            IMX8DXL_SPI3_SDI                      5
+#define IMX8DXL_SPI3_CS0_ADMA_SPI3_CS0                             IMX8DXL_SPI3_CS0                      0
+#define IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1                        IMX8DXL_SPI3_CS0                      1
+#define IMX8DXL_SPI3_CS0_ADMA_LCDIF_HSYNC                          IMX8DXL_SPI3_CS0                      2
+#define IMX8DXL_SPI3_CS0_LSIO_GPIO0_IO16                           IMX8DXL_SPI3_CS0                      4
+#define IMX8DXL_SPI3_CS0_ADMA_LCDIF_CS                             IMX8DXL_SPI3_CS0                      5
+#define IMX8DXL_SPI3_CS1_ADMA_SPI3_CS1                             IMX8DXL_SPI3_CS1                      0
+#define IMX8DXL_SPI3_CS1_ADMA_I2C3_SCL                             IMX8DXL_SPI3_CS1                      1
+#define IMX8DXL_SPI3_CS1_ADMA_LCDIF_RESET                          IMX8DXL_SPI3_CS1                      2
+#define IMX8DXL_SPI3_CS1_ADMA_SPI2_CS0                             IMX8DXL_SPI3_CS1                      3
+#define IMX8DXL_SPI3_CS1_ADMA_LCDIF_D16                            IMX8DXL_SPI3_CS1                      4
+#define IMX8DXL_SPI3_CS1_ADMA_LCDIF_RD_E                           IMX8DXL_SPI3_CS1                      5
+#define IMX8DXL_MCLK_IN1_ADMA_ACM_MCLK_IN1                         IMX8DXL_MCLK_IN1                      0
+#define IMX8DXL_MCLK_IN1_ADMA_I2C3_SDA                             IMX8DXL_MCLK_IN1                      1
+#define IMX8DXL_MCLK_IN1_ADMA_LCDIF_EN                             IMX8DXL_MCLK_IN1                      2
+#define IMX8DXL_MCLK_IN1_ADMA_SPI2_SCK                             IMX8DXL_MCLK_IN1                      3
+#define IMX8DXL_MCLK_IN1_ADMA_LCDIF_D17                            IMX8DXL_MCLK_IN1                      4
+#define IMX8DXL_MCLK_IN1_ADMA_LCDIF_D03                            IMX8DXL_MCLK_IN1                      5
+#define IMX8DXL_MCLK_IN0_ADMA_ACM_MCLK_IN0                         IMX8DXL_MCLK_IN0                      0
+#define IMX8DXL_MCLK_IN0_ADMA_LCDIF_VSYNC                          IMX8DXL_MCLK_IN0                      2
+#define IMX8DXL_MCLK_IN0_ADMA_SPI2_SDI                             IMX8DXL_MCLK_IN0                      3
+#define IMX8DXL_MCLK_IN0_LSIO_GPIO0_IO19                           IMX8DXL_MCLK_IN0                      4
+#define IMX8DXL_MCLK_IN0_ADMA_LCDIF_RS                             IMX8DXL_MCLK_IN0                      5
+#define IMX8DXL_MCLK_OUT0_ADMA_ACM_MCLK_OUT0                       IMX8DXL_MCLK_OUT0                     0
+#define IMX8DXL_MCLK_OUT0_ADMA_LCDIF_CLK                           IMX8DXL_MCLK_OUT0                     2
+#define IMX8DXL_MCLK_OUT0_ADMA_SPI2_SDO                            IMX8DXL_MCLK_OUT0                     3
+#define IMX8DXL_MCLK_OUT0_LSIO_GPIO0_IO20                          IMX8DXL_MCLK_OUT0                     4
+#define IMX8DXL_MCLK_OUT0_ADMA_LCDIF_WR_RWN                        IMX8DXL_MCLK_OUT0                     5
+#define IMX8DXL_UART1_TX_ADMA_UART1_TX                             IMX8DXL_UART1_TX                      0
+#define IMX8DXL_UART1_TX_LSIO_PWM0_OUT                             IMX8DXL_UART1_TX                      1
+#define IMX8DXL_UART1_TX_LSIO_GPT0_CAPTURE                         IMX8DXL_UART1_TX                      2
+#define IMX8DXL_UART1_TX_LSIO_GPIO0_IO21                           IMX8DXL_UART1_TX                      4
+#define IMX8DXL_UART1_TX_ADMA_LCDIF_D04                            IMX8DXL_UART1_TX                      5
+#define IMX8DXL_UART1_RX_ADMA_UART1_RX                             IMX8DXL_UART1_RX                      0
+#define IMX8DXL_UART1_RX_LSIO_PWM1_OUT                             IMX8DXL_UART1_RX                      1
+#define IMX8DXL_UART1_RX_LSIO_GPT0_COMPARE                         IMX8DXL_UART1_RX                      2
+#define IMX8DXL_UART1_RX_LSIO_GPT1_CLK                             IMX8DXL_UART1_RX                      3
+#define IMX8DXL_UART1_RX_LSIO_GPIO0_IO22                           IMX8DXL_UART1_RX                      4
+#define IMX8DXL_UART1_RX_ADMA_LCDIF_D05                            IMX8DXL_UART1_RX                      5
+#define IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B                       IMX8DXL_UART1_RTS_B                   0
+#define IMX8DXL_UART1_RTS_B_LSIO_PWM2_OUT                          IMX8DXL_UART1_RTS_B                   1
+#define IMX8DXL_UART1_RTS_B_ADMA_LCDIF_D16                         IMX8DXL_UART1_RTS_B                   2
+#define IMX8DXL_UART1_RTS_B_LSIO_GPT1_CAPTURE                      IMX8DXL_UART1_RTS_B                   3
+#define IMX8DXL_UART1_RTS_B_LSIO_GPT0_CLK                          IMX8DXL_UART1_RTS_B                   4
+#define IMX8DXL_UART1_RTS_B_ADMA_LCDIF_D06                         IMX8DXL_UART1_RTS_B                   5
+#define IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B                       IMX8DXL_UART1_CTS_B                   0
+#define IMX8DXL_UART1_CTS_B_LSIO_PWM3_OUT                          IMX8DXL_UART1_CTS_B                   1
+#define IMX8DXL_UART1_CTS_B_ADMA_LCDIF_D17                         IMX8DXL_UART1_CTS_B                   2
+#define IMX8DXL_UART1_CTS_B_LSIO_GPT1_COMPARE                      IMX8DXL_UART1_CTS_B                   3
+#define IMX8DXL_UART1_CTS_B_LSIO_GPIO0_IO24                        IMX8DXL_UART1_CTS_B                   4
+#define IMX8DXL_UART1_CTS_B_ADMA_LCDIF_D07                         IMX8DXL_UART1_CTS_B                   5
+#define IMX8DXL_SPI0_SCK_ADMA_SPI0_SCK                             IMX8DXL_SPI0_SCK                      0
+#define IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC                             IMX8DXL_SPI0_SCK                      1
+#define IMX8DXL_SPI0_SCK_M40_I2C0_SCL                              IMX8DXL_SPI0_SCK                      2
+#define IMX8DXL_SPI0_SCK_M40_GPIO0_IO00                            IMX8DXL_SPI0_SCK                      3
+#define IMX8DXL_SPI0_SCK_LSIO_GPIO1_IO04                           IMX8DXL_SPI0_SCK                      4
+#define IMX8DXL_SPI0_SCK_ADMA_LCDIF_D08                            IMX8DXL_SPI0_SCK                      5
+#define IMX8DXL_SPI0_SDI_ADMA_SPI0_SDI                             IMX8DXL_SPI0_SDI                      0
+#define IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD                             IMX8DXL_SPI0_SDI                      1
+#define IMX8DXL_SPI0_SDI_M40_TPM0_CH0                              IMX8DXL_SPI0_SDI                      2
+#define IMX8DXL_SPI0_SDI_M40_GPIO0_IO02                            IMX8DXL_SPI0_SDI                      3
+#define IMX8DXL_SPI0_SDI_LSIO_GPIO1_IO05                           IMX8DXL_SPI0_SDI                      4
+#define IMX8DXL_SPI0_SDI_ADMA_LCDIF_D09                            IMX8DXL_SPI0_SDI                      5
+#define IMX8DXL_SPI0_SDO_ADMA_SPI0_SDO                             IMX8DXL_SPI0_SDO                      0
+#define IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS                            IMX8DXL_SPI0_SDO                      1
+#define IMX8DXL_SPI0_SDO_M40_I2C0_SDA                              IMX8DXL_SPI0_SDO                      2
+#define IMX8DXL_SPI0_SDO_M40_GPIO0_IO01                            IMX8DXL_SPI0_SDO                      3
+#define IMX8DXL_SPI0_SDO_LSIO_GPIO1_IO06                           IMX8DXL_SPI0_SDO                      4
+#define IMX8DXL_SPI0_SDO_ADMA_LCDIF_D10                            IMX8DXL_SPI0_SDO                      5
+#define IMX8DXL_SPI0_CS1_ADMA_SPI0_CS1                             IMX8DXL_SPI0_CS1                      0
+#define IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC                             IMX8DXL_SPI0_CS1                      1
+#define IMX8DXL_SPI0_CS1_ADMA_SAI1_TXD                             IMX8DXL_SPI0_CS1                      2
+#define IMX8DXL_SPI0_CS1_ADMA_LCD_PWM0_OUT                         IMX8DXL_SPI0_CS1                      3
+#define IMX8DXL_SPI0_CS1_LSIO_GPIO1_IO07                           IMX8DXL_SPI0_CS1                      4
+#define IMX8DXL_SPI0_CS1_ADMA_LCDIF_D11                            IMX8DXL_SPI0_CS1                      5
+#define IMX8DXL_SPI0_CS0_ADMA_SPI0_CS0                             IMX8DXL_SPI0_CS0                      0
+#define IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD                             IMX8DXL_SPI0_CS0                      1
+#define IMX8DXL_SPI0_CS0_M40_TPM0_CH1                              IMX8DXL_SPI0_CS0                      2
+#define IMX8DXL_SPI0_CS0_M40_GPIO0_IO03                            IMX8DXL_SPI0_CS0                      3
+#define IMX8DXL_SPI0_CS0_LSIO_GPIO1_IO08                           IMX8DXL_SPI0_CS0                      4
+#define IMX8DXL_SPI0_CS0_ADMA_LCDIF_D12                            IMX8DXL_SPI0_CS0                      5
+#define IMX8DXL_ADC_IN1_ADMA_ADC_IN1                               IMX8DXL_ADC_IN1                       0
+#define IMX8DXL_ADC_IN1_M40_I2C0_SDA                               IMX8DXL_ADC_IN1                       1
+#define IMX8DXL_ADC_IN1_M40_GPIO0_IO01                             IMX8DXL_ADC_IN1                       2
+#define IMX8DXL_ADC_IN1_ADMA_I2C0_SDA                              IMX8DXL_ADC_IN1                       3
+#define IMX8DXL_ADC_IN1_LSIO_GPIO1_IO09                            IMX8DXL_ADC_IN1                       4
+#define IMX8DXL_ADC_IN1_ADMA_LCDIF_D13                             IMX8DXL_ADC_IN1                       5
+#define IMX8DXL_ADC_IN0_ADMA_ADC_IN0                               IMX8DXL_ADC_IN0                       0
+#define IMX8DXL_ADC_IN0_M40_I2C0_SCL                               IMX8DXL_ADC_IN0                       1
+#define IMX8DXL_ADC_IN0_M40_GPIO0_IO00                             IMX8DXL_ADC_IN0                       2
+#define IMX8DXL_ADC_IN0_ADMA_I2C0_SCL                              IMX8DXL_ADC_IN0                       3
+#define IMX8DXL_ADC_IN0_LSIO_GPIO1_IO10                            IMX8DXL_ADC_IN0                       4
+#define IMX8DXL_ADC_IN0_ADMA_LCDIF_D14                             IMX8DXL_ADC_IN0                       5
+#define IMX8DXL_ADC_IN3_ADMA_ADC_IN3                               IMX8DXL_ADC_IN3                       0
+#define IMX8DXL_ADC_IN3_M40_UART0_TX                               IMX8DXL_ADC_IN3                       1
+#define IMX8DXL_ADC_IN3_M40_GPIO0_IO03                             IMX8DXL_ADC_IN3                       2
+#define IMX8DXL_ADC_IN3_ADMA_ACM_MCLK_OUT0                         IMX8DXL_ADC_IN3                       3
+#define IMX8DXL_ADC_IN3_LSIO_GPIO1_IO11                            IMX8DXL_ADC_IN3                       4
+#define IMX8DXL_ADC_IN3_ADMA_LCDIF_D15                             IMX8DXL_ADC_IN3                       5
+#define IMX8DXL_ADC_IN2_ADMA_ADC_IN2                               IMX8DXL_ADC_IN2                       0
+#define IMX8DXL_ADC_IN2_M40_UART0_RX                               IMX8DXL_ADC_IN2                       1
+#define IMX8DXL_ADC_IN2_M40_GPIO0_IO02                             IMX8DXL_ADC_IN2                       2
+#define IMX8DXL_ADC_IN2_ADMA_ACM_MCLK_IN0                          IMX8DXL_ADC_IN2                       3
+#define IMX8DXL_ADC_IN2_LSIO_GPIO1_IO12                            IMX8DXL_ADC_IN2                       4
+#define IMX8DXL_ADC_IN2_ADMA_LCDIF_D16                             IMX8DXL_ADC_IN2                       5
+#define IMX8DXL_ADC_IN5_ADMA_ADC_IN5                               IMX8DXL_ADC_IN5                       0
+#define IMX8DXL_ADC_IN5_M40_TPM0_CH1                               IMX8DXL_ADC_IN5                       1
+#define IMX8DXL_ADC_IN5_M40_GPIO0_IO05                             IMX8DXL_ADC_IN5                       2
+#define IMX8DXL_ADC_IN5_ADMA_LCDIF_LCDBUSY                         IMX8DXL_ADC_IN5                       3
+#define IMX8DXL_ADC_IN5_LSIO_GPIO1_IO13                            IMX8DXL_ADC_IN5                       4
+#define IMX8DXL_ADC_IN5_ADMA_LCDIF_D17                             IMX8DXL_ADC_IN5                       5
+#define IMX8DXL_ADC_IN4_ADMA_ADC_IN4                               IMX8DXL_ADC_IN4                       0
+#define IMX8DXL_ADC_IN4_M40_TPM0_CH0                               IMX8DXL_ADC_IN4                       1
+#define IMX8DXL_ADC_IN4_M40_GPIO0_IO04                             IMX8DXL_ADC_IN4                       2
+#define IMX8DXL_ADC_IN4_ADMA_LCDIF_LCDRESET                        IMX8DXL_ADC_IN4                       3
+#define IMX8DXL_ADC_IN4_LSIO_GPIO1_IO14                            IMX8DXL_ADC_IN4                       4
+#define IMX8DXL_FLEXCAN0_RX_ADMA_FLEXCAN0_RX                       IMX8DXL_FLEXCAN0_RX                   0
+#define IMX8DXL_FLEXCAN0_RX_ADMA_SAI2_RXC                          IMX8DXL_FLEXCAN0_RX                   1
+#define IMX8DXL_FLEXCAN0_RX_ADMA_UART0_RTS_B                       IMX8DXL_FLEXCAN0_RX                   2
+#define IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC                          IMX8DXL_FLEXCAN0_RX                   3
+#define IMX8DXL_FLEXCAN0_RX_LSIO_GPIO1_IO15                        IMX8DXL_FLEXCAN0_RX                   4
+#define IMX8DXL_FLEXCAN0_RX_LSIO_GPIO6_IO08                        IMX8DXL_FLEXCAN0_RX                   5
+#define IMX8DXL_FLEXCAN0_TX_ADMA_FLEXCAN0_TX                       IMX8DXL_FLEXCAN0_TX                   0
+#define IMX8DXL_FLEXCAN0_TX_ADMA_SAI2_RXD                          IMX8DXL_FLEXCAN0_TX                   1
+#define IMX8DXL_FLEXCAN0_TX_ADMA_UART0_CTS_B                       IMX8DXL_FLEXCAN0_TX                   2
+#define IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS                         IMX8DXL_FLEXCAN0_TX                   3
+#define IMX8DXL_FLEXCAN0_TX_LSIO_GPIO1_IO16                        IMX8DXL_FLEXCAN0_TX                   4
+#define IMX8DXL_FLEXCAN0_TX_LSIO_GPIO6_IO09                        IMX8DXL_FLEXCAN0_TX                   5
+#define IMX8DXL_FLEXCAN1_RX_ADMA_FLEXCAN1_RX                       IMX8DXL_FLEXCAN1_RX                   0
+#define IMX8DXL_FLEXCAN1_RX_ADMA_SAI2_RXFS                         IMX8DXL_FLEXCAN1_RX                   1
+#define IMX8DXL_FLEXCAN1_RX_ADMA_FTM_CH2                           IMX8DXL_FLEXCAN1_RX                   2
+#define IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD                          IMX8DXL_FLEXCAN1_RX                   3
+#define IMX8DXL_FLEXCAN1_RX_LSIO_GPIO1_IO17                        IMX8DXL_FLEXCAN1_RX                   4
+#define IMX8DXL_FLEXCAN1_RX_LSIO_GPIO6_IO10                        IMX8DXL_FLEXCAN1_RX                   5
+#define IMX8DXL_FLEXCAN1_TX_ADMA_FLEXCAN1_TX                       IMX8DXL_FLEXCAN1_TX                   0
+#define IMX8DXL_FLEXCAN1_TX_ADMA_SAI3_RXC                          IMX8DXL_FLEXCAN1_TX                   1
+#define IMX8DXL_FLEXCAN1_TX_ADMA_DMA0_REQ_IN0                      IMX8DXL_FLEXCAN1_TX                   2
+#define IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD                          IMX8DXL_FLEXCAN1_TX                   3
+#define IMX8DXL_FLEXCAN1_TX_LSIO_GPIO1_IO18                        IMX8DXL_FLEXCAN1_TX                   4
+#define IMX8DXL_FLEXCAN1_TX_LSIO_GPIO6_IO11                        IMX8DXL_FLEXCAN1_TX                   5
+#define IMX8DXL_FLEXCAN2_RX_ADMA_FLEXCAN2_RX                       IMX8DXL_FLEXCAN2_RX                   0
+#define IMX8DXL_FLEXCAN2_RX_ADMA_SAI3_RXD                          IMX8DXL_FLEXCAN2_RX                   1
+#define IMX8DXL_FLEXCAN2_RX_ADMA_UART3_RX                          IMX8DXL_FLEXCAN2_RX                   2
+#define IMX8DXL_FLEXCAN2_RX_ADMA_SAI1_RXFS                         IMX8DXL_FLEXCAN2_RX                   3
+#define IMX8DXL_FLEXCAN2_RX_LSIO_GPIO1_IO19                        IMX8DXL_FLEXCAN2_RX                   4
+#define IMX8DXL_FLEXCAN2_RX_LSIO_GPIO6_IO12                        IMX8DXL_FLEXCAN2_RX                   5
+#define IMX8DXL_FLEXCAN2_TX_ADMA_FLEXCAN2_TX                       IMX8DXL_FLEXCAN2_TX                   0
+#define IMX8DXL_FLEXCAN2_TX_ADMA_SAI3_RXFS                         IMX8DXL_FLEXCAN2_TX                   1
+#define IMX8DXL_FLEXCAN2_TX_ADMA_UART3_TX                          IMX8DXL_FLEXCAN2_TX                   2
+#define IMX8DXL_FLEXCAN2_TX_ADMA_SAI1_RXC                          IMX8DXL_FLEXCAN2_TX                   3
+#define IMX8DXL_FLEXCAN2_TX_LSIO_GPIO1_IO20                        IMX8DXL_FLEXCAN2_TX                   4
+#define IMX8DXL_FLEXCAN2_TX_LSIO_GPIO6_IO13                        IMX8DXL_FLEXCAN2_TX                   5
+#define IMX8DXL_UART0_RX_ADMA_UART0_RX                             IMX8DXL_UART0_RX                      0
+#define IMX8DXL_UART0_RX_ADMA_MQS_R                                IMX8DXL_UART0_RX                      1
+#define IMX8DXL_UART0_RX_ADMA_FLEXCAN0_RX                          IMX8DXL_UART0_RX                      2
+#define IMX8DXL_UART0_RX_SCU_UART0_RX                              IMX8DXL_UART0_RX                      3
+#define IMX8DXL_UART0_RX_LSIO_GPIO1_IO21                           IMX8DXL_UART0_RX                      4
+#define IMX8DXL_UART0_RX_LSIO_GPIO6_IO14                           IMX8DXL_UART0_RX                      5
+#define IMX8DXL_UART0_TX_ADMA_UART0_TX                             IMX8DXL_UART0_TX                      0
+#define IMX8DXL_UART0_TX_ADMA_MQS_L                                IMX8DXL_UART0_TX                      1
+#define IMX8DXL_UART0_TX_ADMA_FLEXCAN0_TX                          IMX8DXL_UART0_TX                      2
+#define IMX8DXL_UART0_TX_SCU_UART0_TX                              IMX8DXL_UART0_TX                      3
+#define IMX8DXL_UART0_TX_LSIO_GPIO1_IO22                           IMX8DXL_UART0_TX                      4
+#define IMX8DXL_UART0_TX_LSIO_GPIO6_IO15                           IMX8DXL_UART0_TX                      5
+#define IMX8DXL_UART2_TX_ADMA_UART2_TX                             IMX8DXL_UART2_TX                      0
+#define IMX8DXL_UART2_TX_ADMA_FTM_CH1                              IMX8DXL_UART2_TX                      1
+#define IMX8DXL_UART2_TX_ADMA_FLEXCAN1_TX                          IMX8DXL_UART2_TX                      2
+#define IMX8DXL_UART2_TX_LSIO_GPIO1_IO23                           IMX8DXL_UART2_TX                      4
+#define IMX8DXL_UART2_TX_LSIO_GPIO6_IO16                           IMX8DXL_UART2_TX                      5
+#define IMX8DXL_UART2_RX_ADMA_UART2_RX                             IMX8DXL_UART2_RX                      0
+#define IMX8DXL_UART2_RX_ADMA_FTM_CH0                              IMX8DXL_UART2_RX                      1
+#define IMX8DXL_UART2_RX_ADMA_FLEXCAN1_RX                          IMX8DXL_UART2_RX                      2
+#define IMX8DXL_UART2_RX_LSIO_GPIO1_IO24                           IMX8DXL_UART2_RX                      4
+#define IMX8DXL_UART2_RX_LSIO_GPIO6_IO17                           IMX8DXL_UART2_RX                      5
+#define IMX8DXL_JTAG_TRST_B_SCU_JTAG_TRST_B                        IMX8DXL_JTAG_TRST_B                   0
+#define IMX8DXL_JTAG_TRST_B_SCU_WDOG0_WDOG_OUT                     IMX8DXL_JTAG_TRST_B                   1
+#define IMX8DXL_PMIC_I2C_SCL_SCU_PMIC_I2C_SCL                      IMX8DXL_PMIC_I2C_SCL                  0
+#define IMX8DXL_PMIC_I2C_SCL_SCU_GPIO0_IOXX_PMIC_A35_ON            IMX8DXL_PMIC_I2C_SCL                  1
+#define IMX8DXL_PMIC_I2C_SCL_LSIO_GPIO2_IO01                       IMX8DXL_PMIC_I2C_SCL                  4
+#define IMX8DXL_PMIC_I2C_SDA_SCU_PMIC_I2C_SDA                      IMX8DXL_PMIC_I2C_SDA                  0
+#define IMX8DXL_PMIC_I2C_SDA_SCU_GPIO0_IOXX_PMIC_GPU_ON            IMX8DXL_PMIC_I2C_SDA                  1
+#define IMX8DXL_PMIC_I2C_SDA_LSIO_GPIO2_IO02                       IMX8DXL_PMIC_I2C_SDA                  4
+#define IMX8DXL_PMIC_INT_B_SCU_DSC_PMIC_INT_B                      IMX8DXL_PMIC_INT_B                    0
+#define IMX8DXL_SCU_GPIO0_00_SCU_GPIO0_IO00                        IMX8DXL_SCU_GPIO0_00                  0
+#define IMX8DXL_SCU_GPIO0_00_SCU_UART0_RX                          IMX8DXL_SCU_GPIO0_00                  1
+#define IMX8DXL_SCU_GPIO0_00_M40_UART0_RX                          IMX8DXL_SCU_GPIO0_00                  2
+#define IMX8DXL_SCU_GPIO0_00_ADMA_UART3_RX                         IMX8DXL_SCU_GPIO0_00                  3
+#define IMX8DXL_SCU_GPIO0_00_LSIO_GPIO2_IO03                       IMX8DXL_SCU_GPIO0_00                  4
+#define IMX8DXL_SCU_GPIO0_01_SCU_GPIO0_IO01                        IMX8DXL_SCU_GPIO0_01                  0
+#define IMX8DXL_SCU_GPIO0_01_SCU_UART0_TX                          IMX8DXL_SCU_GPIO0_01                  1
+#define IMX8DXL_SCU_GPIO0_01_M40_UART0_TX                          IMX8DXL_SCU_GPIO0_01                  2
+#define IMX8DXL_SCU_GPIO0_01_ADMA_UART3_TX                         IMX8DXL_SCU_GPIO0_01                  3
+#define IMX8DXL_SCU_GPIO0_01_SCU_WDOG0_WDOG_OUT                    IMX8DXL_SCU_GPIO0_01                  4
+#define IMX8DXL_SCU_PMIC_STANDBY_SCU_DSC_PMIC_STANDBY              IMX8DXL_SCU_PMIC_STANDBY              0
+#define IMX8DXL_SCU_BOOT_MODE1_SCU_DSC_BOOT_MODE1                  IMX8DXL_SCU_BOOT_MODE1                0
+#define IMX8DXL_SCU_BOOT_MODE0_SCU_DSC_BOOT_MODE0                  IMX8DXL_SCU_BOOT_MODE0                0
+#define IMX8DXL_SCU_BOOT_MODE2_SCU_DSC_BOOT_MODE2                  IMX8DXL_SCU_BOOT_MODE2                0
+#define IMX8DXL_SCU_BOOT_MODE2_SCU_DSC_RTC_CLOCK_OUTPUT_32K        IMX8DXL_SCU_BOOT_MODE2                1
+#define IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN                IMX8DXL_SNVS_TAMPER_OUT1              4
+#define IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO6_IO19_IN                IMX8DXL_SNVS_TAMPER_OUT1              5
+#define IMX8DXL_SNVS_TAMPER_OUT2_LSIO_GPIO2_IO06_IN                IMX8DXL_SNVS_TAMPER_OUT2              4
+#define IMX8DXL_SNVS_TAMPER_OUT2_LSIO_GPIO6_IO20_IN                IMX8DXL_SNVS_TAMPER_OUT2              5
+#define IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC                     IMX8DXL_SNVS_TAMPER_OUT3              2
+#define IMX8DXL_SNVS_TAMPER_OUT3_LSIO_GPIO2_IO07_IN                IMX8DXL_SNVS_TAMPER_OUT3              4
+#define IMX8DXL_SNVS_TAMPER_OUT3_LSIO_GPIO6_IO21_IN                IMX8DXL_SNVS_TAMPER_OUT3              5
+#define IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD                     IMX8DXL_SNVS_TAMPER_OUT4              2
+#define IMX8DXL_SNVS_TAMPER_OUT4_LSIO_GPIO2_IO08_IN                IMX8DXL_SNVS_TAMPER_OUT4              4
+#define IMX8DXL_SNVS_TAMPER_OUT4_LSIO_GPIO6_IO22_IN                IMX8DXL_SNVS_TAMPER_OUT4              5
+#define IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS                     IMX8DXL_SNVS_TAMPER_IN0               2
+#define IMX8DXL_SNVS_TAMPER_IN0_LSIO_GPIO2_IO09_IN                 IMX8DXL_SNVS_TAMPER_IN0               4
+#define IMX8DXL_SNVS_TAMPER_IN0_LSIO_GPIO6_IO23_IN                 IMX8DXL_SNVS_TAMPER_IN0               5
+#define IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC                      IMX8DXL_SNVS_TAMPER_IN1               2
+#define IMX8DXL_SNVS_TAMPER_IN1_LSIO_GPIO2_IO10_IN                 IMX8DXL_SNVS_TAMPER_IN1               4
+#define IMX8DXL_SNVS_TAMPER_IN1_LSIO_GPIO6_IO24_IN                 IMX8DXL_SNVS_TAMPER_IN1               5
+#define IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD                      IMX8DXL_SNVS_TAMPER_IN2               2
+#define IMX8DXL_SNVS_TAMPER_IN2_LSIO_GPIO2_IO11_IN                 IMX8DXL_SNVS_TAMPER_IN2               4
+#define IMX8DXL_SNVS_TAMPER_IN2_LSIO_GPIO6_IO25_IN                 IMX8DXL_SNVS_TAMPER_IN2               5
+#define IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS                     IMX8DXL_SNVS_TAMPER_IN3               2
+#define IMX8DXL_SNVS_TAMPER_IN3_LSIO_GPIO2_IO12_IN                 IMX8DXL_SNVS_TAMPER_IN3               4
+#define IMX8DXL_SNVS_TAMPER_IN3_LSIO_GPIO6_IO26_IN                 IMX8DXL_SNVS_TAMPER_IN3               5
+#define IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA                             IMX8DXL_SPI1_SCK                      2
+#define IMX8DXL_SPI1_SCK_ADMA_SPI1_SCK                             IMX8DXL_SPI1_SCK                      3
+#define IMX8DXL_SPI1_SCK_LSIO_GPIO3_IO00                           IMX8DXL_SPI1_SCK                      4
+#define IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL                             IMX8DXL_SPI1_SDO                      2
+#define IMX8DXL_SPI1_SDO_ADMA_SPI1_SDO                             IMX8DXL_SPI1_SDO                      3
+#define IMX8DXL_SPI1_SDO_LSIO_GPIO3_IO01                           IMX8DXL_SPI1_SDO                      4
+#define IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL                             IMX8DXL_SPI1_SDI                      2
+#define IMX8DXL_SPI1_SDI_ADMA_SPI1_SDI                             IMX8DXL_SPI1_SDI                      3
+#define IMX8DXL_SPI1_SDI_LSIO_GPIO3_IO02                           IMX8DXL_SPI1_SDI                      4
+#define IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA                             IMX8DXL_SPI1_CS0                      2
+#define IMX8DXL_SPI1_CS0_ADMA_SPI1_CS0                             IMX8DXL_SPI1_CS0                      3
+#define IMX8DXL_SPI1_CS0_LSIO_GPIO3_IO03                           IMX8DXL_SPI1_CS0                      4
+#define IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1                     IMX8DXL_QSPI0A_DATA1                  0
+#define IMX8DXL_QSPI0A_DATA1_LSIO_GPIO3_IO10                       IMX8DXL_QSPI0A_DATA1                  4
+#define IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0                     IMX8DXL_QSPI0A_DATA0                  0
+#define IMX8DXL_QSPI0A_DATA0_LSIO_GPIO3_IO09                       IMX8DXL_QSPI0A_DATA0                  4
+#define IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3                     IMX8DXL_QSPI0A_DATA3                  0
+#define IMX8DXL_QSPI0A_DATA3_LSIO_GPIO3_IO12                       IMX8DXL_QSPI0A_DATA3                  4
+#define IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2                     IMX8DXL_QSPI0A_DATA2                  0
+#define IMX8DXL_QSPI0A_DATA2_LSIO_GPIO3_IO11                       IMX8DXL_QSPI0A_DATA2                  4
+#define IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B                     IMX8DXL_QSPI0A_SS0_B                  0
+#define IMX8DXL_QSPI0A_SS0_B_LSIO_GPIO3_IO14                       IMX8DXL_QSPI0A_SS0_B                  4
+#define IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS                         IMX8DXL_QSPI0A_DQS                    0
+#define IMX8DXL_QSPI0A_DQS_LSIO_GPIO3_IO13                         IMX8DXL_QSPI0A_DQS                    4
+#define IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK                       IMX8DXL_QSPI0A_SCLK                   0
+#define IMX8DXL_QSPI0A_SCLK_LSIO_GPIO3_IO16                        IMX8DXL_QSPI0A_SCLK                   4
+#define IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK                       IMX8DXL_QSPI0B_SCLK                   0
+#define IMX8DXL_QSPI0B_SCLK_LSIO_GPIO3_IO17                        IMX8DXL_QSPI0B_SCLK                   4
+#define IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS                         IMX8DXL_QSPI0B_DQS                    0
+#define IMX8DXL_QSPI0B_DQS_LSIO_GPIO3_IO22                         IMX8DXL_QSPI0B_DQS                    4
+#define IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1                     IMX8DXL_QSPI0B_DATA1                  0
+#define IMX8DXL_QSPI0B_DATA1_LSIO_GPIO3_IO19                       IMX8DXL_QSPI0B_DATA1                  4
+#define IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0                     IMX8DXL_QSPI0B_DATA0                  0
+#define IMX8DXL_QSPI0B_DATA0_LSIO_GPIO3_IO18                       IMX8DXL_QSPI0B_DATA0                  4
+#define IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3                     IMX8DXL_QSPI0B_DATA3                  0
+#define IMX8DXL_QSPI0B_DATA3_LSIO_GPIO3_IO21                       IMX8DXL_QSPI0B_DATA3                  4
+#define IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2                     IMX8DXL_QSPI0B_DATA2                  0
+#define IMX8DXL_QSPI0B_DATA2_LSIO_GPIO3_IO20                       IMX8DXL_QSPI0B_DATA2                  4
+#define IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B                     IMX8DXL_QSPI0B_SS0_B                  0
+#define IMX8DXL_QSPI0B_SS0_B_LSIO_GPIO3_IO23                       IMX8DXL_QSPI0B_SS0_B                  4
+#define IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0A_SS1_B                     IMX8DXL_QSPI0B_SS0_B                  5
+
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_PCIESEP_PAD          IMX8DXL_COMP_CTL_GPIO_1V8_3V3_PCIESEP         0
+#define IMX8DXL_COMP_CTL_GPIO_3V3_USB3IO_PAD               IMX8DXL_COMP_CTL_GPIO_3V3_USB3IO              0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_SD1FIX0_PAD          IMX8DXL_COMP_CTL_GPIO_1V8_3V3_SD1FIX0         0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_VSELSEP_PAD          IMX8DXL_COMP_CTL_GPIO_1V8_3V3_VSELSEP         0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD      IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0     0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD      IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1     0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIOCT_PAD           IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIOCT          0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD          IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB         0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD          IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK         0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHT_PAD          IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHT         0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIOLH_PAD           IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIOLH          0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHD_PAD          IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHD         0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_QSPI0A_PAD           IMX8DXL_COMP_CTL_GPIO_1V8_3V3_QSPI0A          0
+#define IMX8DXL_COMP_CTL_GPIO_1V8_3V3_QSPI0B_PAD           IMX8DXL_COMP_CTL_GPIO_1V8_3V3_QSPI0B          0
+
+#endif
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index 3f74096d5a7c..dc146e44228b 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -28,6 +28,18 @@
 #define SM8150_MMCX	9
 #define SM8150_MMCX_AO	10
 
+/* SM8250 Power Domain Indexes */
+#define SM8250_CX	0
+#define SM8250_CX_AO	1
+#define SM8250_EBI	2
+#define SM8250_GFX	3
+#define SM8250_LCX	4
+#define SM8250_LMX	5
+#define SM8250_MMCX	6
+#define SM8250_MMCX_AO	7
+#define SM8250_MX	8
+#define SM8250_MX_AO	9
+
 /* SC7180 Power Domain Indexes */
 #define SC7180_CX	0
 #define SC7180_CX_AO	1
diff --git a/include/dt-bindings/power/r8a7742-sysc.h b/include/dt-bindings/power/r8a7742-sysc.h
new file mode 100644
index 000000000000..1b1bd3cf95db
--- /dev/null
+++ b/include/dt-bindings/power/r8a7742-sysc.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7742_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7742_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7742_PD_CA15_CPU0		 0
+#define R8A7742_PD_CA15_CPU1		 1
+#define R8A7742_PD_CA15_CPU2		 2
+#define R8A7742_PD_CA15_CPU3		 3
+#define R8A7742_PD_CA7_CPU0		 5
+#define R8A7742_PD_CA7_CPU1		 6
+#define R8A7742_PD_CA7_CPU2		 7
+#define R8A7742_PD_CA7_CPU3		 8
+#define R8A7742_PD_CA15_SCU		12
+#define R8A7742_PD_RGX			20
+#define R8A7742_PD_CA7_SCU		21
+
+/* Always-on power area */
+#define R8A7742_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A7742_SYSC_H__ */
diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
index ea5058618863..883bfd3bcbad 100644
--- a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
+++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
@@ -69,7 +69,7 @@
 #define RESET_SYS_CPU_L2		58
 #define RESET_SYS_CPU_P			59
 #define RESET_SYS_CPU_MBIST		60
-/*					61	*/
+#define RESET_ACODEC			61
 /*					62	*/
 /*					63	*/
 /*	RESET2					*/
diff --git a/include/dt-bindings/reset/imx8mp-reset.h b/include/dt-bindings/reset/imx8mp-reset.h
new file mode 100644
index 000000000000..2e8c9104b666
--- /dev/null
+++ b/include/dt-bindings/reset/imx8mp-reset.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2020 NXP
+ */
+
+#ifndef DT_BINDING_RESET_IMX8MP_H
+#define DT_BINDING_RESET_IMX8MP_H
+
+#define IMX8MP_RESET_A53_CORE_POR_RESET0	0
+#define IMX8MP_RESET_A53_CORE_POR_RESET1	1
+#define IMX8MP_RESET_A53_CORE_POR_RESET2	2
+#define IMX8MP_RESET_A53_CORE_POR_RESET3	3
+#define IMX8MP_RESET_A53_CORE_RESET0		4
+#define IMX8MP_RESET_A53_CORE_RESET1		5
+#define IMX8MP_RESET_A53_CORE_RESET2		6
+#define IMX8MP_RESET_A53_CORE_RESET3		7
+#define IMX8MP_RESET_A53_DBG_RESET0		8
+#define IMX8MP_RESET_A53_DBG_RESET1		9
+#define IMX8MP_RESET_A53_DBG_RESET2		10
+#define IMX8MP_RESET_A53_DBG_RESET3		11
+#define IMX8MP_RESET_A53_ETM_RESET0		12
+#define IMX8MP_RESET_A53_ETM_RESET1		13
+#define IMX8MP_RESET_A53_ETM_RESET2		14
+#define IMX8MP_RESET_A53_ETM_RESET3		15
+#define IMX8MP_RESET_A53_SOC_DBG_RESET		16
+#define IMX8MP_RESET_A53_L2RESET		17
+#define IMX8MP_RESET_SW_NON_SCLR_M7C_RST	18
+#define IMX8MP_RESET_OTG1_PHY_RESET		19
+#define IMX8MP_RESET_OTG2_PHY_RESET		20
+#define IMX8MP_RESET_SUPERMIX_RESET		21
+#define IMX8MP_RESET_AUDIOMIX_RESET		22
+#define IMX8MP_RESET_MLMIX_RESET		23
+#define IMX8MP_RESET_PCIEPHY			24
+#define IMX8MP_RESET_PCIEPHY_PERST		25
+#define IMX8MP_RESET_PCIE_CTRL_APPS_EN		26
+#define IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF	27
+#define IMX8MP_RESET_HDMI_PHY_APB_RESET		28
+#define IMX8MP_RESET_MEDIA_RESET		29
+#define IMX8MP_RESET_GPU2D_RESET		30
+#define IMX8MP_RESET_GPU3D_RESET		31
+#define IMX8MP_RESET_GPU_RESET			32
+#define IMX8MP_RESET_VPU_RESET			33
+#define IMX8MP_RESET_VPU_G1_RESET		34
+#define IMX8MP_RESET_VPU_G2_RESET		35
+#define IMX8MP_RESET_VPUVC8KE_RESET		36
+#define IMX8MP_RESET_NOC_RESET			37
+
+#define IMX8MP_RESET_NUM			38
+
+#endif
diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h
index 9a301082d361..a5b570737582 100644
--- a/include/dt-bindings/reset/imx8mq-reset.h
+++ b/include/dt-bindings/reset/imx8mq-reset.h
@@ -28,36 +28,36 @@
 #define IMX8MQ_RESET_A53_L2RESET		17
 #define IMX8MQ_RESET_SW_NON_SCLR_M4C_RST	18
 #define IMX8MQ_RESET_OTG1_PHY_RESET		19
-#define IMX8MQ_RESET_OTG2_PHY_RESET		20
-#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N	21
-#define IMX8MQ_RESET_MIPI_DSI_RESET_N		22
-#define IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N	23
-#define IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N	24
-#define IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N	25
-#define IMX8MQ_RESET_PCIEPHY			26
-#define IMX8MQ_RESET_PCIEPHY_PERST		27
-#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN		28
-#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF	29
-#define IMX8MQ_RESET_HDMI_PHY_APB_RESET		30	/* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_OTG2_PHY_RESET		20	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N	21	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_RESET_N		22	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N	23	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N	24	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N	25	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIEPHY			26	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIEPHY_PERST		27	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN		28	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF	29	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_HDMI_PHY_APB_RESET		30	/* i.MX8MM/i.MX8MN does NOT support */
 #define IMX8MQ_RESET_DISP_RESET			31
 #define IMX8MQ_RESET_GPU_RESET			32
-#define IMX8MQ_RESET_VPU_RESET			33
-#define IMX8MQ_RESET_PCIEPHY2			34	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_PCIEPHY2_PERST		35	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN		36	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF	37	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET	38	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET	39	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET	40	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET	41	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET	42	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET	43	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_DDRC1_PRST			44
-#define IMX8MQ_RESET_DDRC1_CORE_RESET		45
-#define IMX8MQ_RESET_DDRC1_PHY_RESET		46
-#define IMX8MQ_RESET_DDRC2_PRST			47	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_DDRC2_CORE_RESET		48	/* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_DDRC2_PHY_RESET		49	/* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_VPU_RESET			33	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIEPHY2			34	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIEPHY2_PERST		35	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN		36	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF	37	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET	38	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET	39	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET	40	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET	41	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET	42	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET	43	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC1_PRST			44	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC1_CORE_RESET		45	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC1_PHY_RESET		46	/* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC2_PRST			47	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC2_CORE_RESET		48	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC2_PHY_RESET		49	/* i.MX8MM/i.MX8MN does NOT support */
 
 #define IMX8MQ_RESET_NUM			50
 
diff --git a/include/dt-bindings/reset/realtek,rtd1195.h b/include/dt-bindings/reset/realtek,rtd1195.h
new file mode 100644
index 000000000000..27902abf935b
--- /dev/null
+++ b/include/dt-bindings/reset/realtek,rtd1195.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */
+/*
+ * Realtek RTD1195 reset controllers
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+#ifndef DT_BINDINGS_RESET_RTD1195_H
+#define DT_BINDINGS_RESET_RTD1195_H
+
+/* soft reset 1 */
+#define RTD1195_RSTN_MISC		0
+#define RTD1195_RSTN_RNG		1
+#define RTD1195_RSTN_USB3_POW		2
+#define RTD1195_RSTN_GSPI		3
+#define RTD1195_RSTN_USB3_P0_MDIO	4
+#define RTD1195_RSTN_VE_H265		5
+#define RTD1195_RSTN_USB		6
+#define RTD1195_RSTN_USB_PHY0		8
+#define RTD1195_RSTN_USB_PHY1		9
+#define RTD1195_RSTN_HDMIRX		11
+#define RTD1195_RSTN_HDMI		12
+#define RTD1195_RSTN_ETN		14
+#define RTD1195_RSTN_AIO		15
+#define RTD1195_RSTN_GPU		16
+#define RTD1195_RSTN_VE_H264		17
+#define RTD1195_RSTN_VE_JPEG		18
+#define RTD1195_RSTN_TVE		19
+#define RTD1195_RSTN_VO			20
+#define RTD1195_RSTN_LVDS		21
+#define RTD1195_RSTN_SE			22
+#define RTD1195_RSTN_DCU		23
+#define RTD1195_RSTN_DC_PHY		24
+#define RTD1195_RSTN_CP			25
+#define RTD1195_RSTN_MD			26
+#define RTD1195_RSTN_TP			27
+#define RTD1195_RSTN_AE			28
+#define RTD1195_RSTN_NF			29
+#define RTD1195_RSTN_MIPI		30
+
+/* soft reset 2 */
+#define RTD1195_RSTN_ACPU		0
+#define RTD1195_RSTN_VCPU		1
+#define RTD1195_RSTN_PCR		9
+#define RTD1195_RSTN_CR			10
+#define RTD1195_RSTN_EMMC		11
+#define RTD1195_RSTN_SDIO		12
+#define RTD1195_RSTN_I2C_5		18
+#define RTD1195_RSTN_RTC		20
+#define RTD1195_RSTN_I2C_4		23
+#define RTD1195_RSTN_I2C_3		24
+#define RTD1195_RSTN_I2C_2		25
+#define RTD1195_RSTN_I2C_1		26
+#define RTD1195_RSTN_UR1		28
+
+/* soft reset 3 */
+#define RTD1195_RSTN_SB2		0
+
+/* iso soft reset */
+#define RTD1195_ISO_RSTN_VFD		0
+#define RTD1195_ISO_RSTN_IR		1
+#define RTD1195_ISO_RSTN_CEC0		2
+#define RTD1195_ISO_RSTN_CEC1		3
+#define RTD1195_ISO_RSTN_DP		4
+#define RTD1195_ISO_RSTN_CBUSTX		5
+#define RTD1195_ISO_RSTN_CBUSRX		6
+#define RTD1195_ISO_RSTN_EFUSE		7
+#define RTD1195_ISO_RSTN_UR0		8
+#define RTD1195_ISO_RSTN_GMAC		9
+#define RTD1195_ISO_RSTN_GPHY		10
+#define RTD1195_ISO_RSTN_I2C_0		11
+#define RTD1195_ISO_RSTN_I2C_6		12
+#define RTD1195_ISO_RSTN_CBUS		13
+
+#endif
diff --git a/include/dt-bindings/reset/realtek,rtd1295.h b/include/dt-bindings/reset/realtek,rtd1295.h
index 2c0cb6afe816..dd89e4c80264 100644
--- a/include/dt-bindings/reset/realtek,rtd1295.h
+++ b/include/dt-bindings/reset/realtek,rtd1295.h
@@ -75,6 +75,9 @@
 #define RTD1295_RSTN_CBUS_TX		30
 #define RTD1295_RSTN_SDS_PHY		31
 
+/* soft reset 3 */
+#define RTD1295_RSTN_SB2		0
+
 /* soft reset 4 */
 #define RTD1295_RSTN_DCPHY_CRT		0
 #define RTD1295_RSTN_DCPHY_ALERT_RX	1
diff --git a/include/keys/encrypted-type.h b/include/keys/encrypted-type.h
index 9e9ccb20d586..38afb341c3f2 100644
--- a/include/keys/encrypted-type.h
+++ b/include/keys/encrypted-type.h
@@ -27,7 +27,7 @@ struct encrypted_key_payload {
 	unsigned short payload_datalen;		/* payload data length */
 	unsigned short encrypted_key_format;	/* encrypted key format */
 	u8 *decrypted_data;	/* decrypted data */
-	u8 payload_data[0];	/* payload data + datablob + hmac */
+	u8 payload_data[];	/* payload data + datablob + hmac */
 };
 
 extern struct key_type key_type_encrypted;
diff --git a/include/keys/rxrpc-type.h b/include/keys/rxrpc-type.h
index a183278c3e9e..2b0b15a71228 100644
--- a/include/keys/rxrpc-type.h
+++ b/include/keys/rxrpc-type.h
@@ -28,7 +28,7 @@ struct rxkad_key {
 	u8	primary_flag;		/* T if key for primary cell for this user */
 	u16	ticket_len;		/* length of ticket[] */
 	u8	session_key[8];		/* DES session key */
-	u8	ticket[0];		/* the encrypted ticket */
+	u8	ticket[];		/* the encrypted ticket */
 };
 
 /*
@@ -100,7 +100,7 @@ struct rxrpc_key_data_v1 {
 	u32		expiry;			/* time_t */
 	u32		kvno;
 	u8		session_key[8];
-	u8		ticket[0];
+	u8		ticket[];
 };
 
 /*
diff --git a/include/keys/user-type.h b/include/keys/user-type.h
index be61fcddc02a..386c31432789 100644
--- a/include/keys/user-type.h
+++ b/include/keys/user-type.h
@@ -27,7 +27,7 @@
 struct user_key_payload {
 	struct rcu_head	rcu;		/* RCU destructor */
 	unsigned short	datalen;	/* length of this data */
-	char		data[0] __aligned(__alignof__(u64)); /* actual data */
+	char		data[] __aligned(__alignof__(u64)); /* actual data */
 };
 
 extern struct key_type key_type_user;
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 26f0ecf401ea..0bbfd647f5c6 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -65,6 +65,7 @@ struct amba_device {
 	struct device		dev;
 	struct resource		res;
 	struct clk		*pclk;
+	struct device_dma_parameters dma_parms;
 	unsigned int		periphid;
 	unsigned int		cid;
 	struct amba_cs_uci_id	uci;
diff --git a/include/linux/atomic-fallback.h b/include/linux/atomic-fallback.h
index a7d240e465c0..656b5489b673 100644
--- a/include/linux/atomic-fallback.h
+++ b/include/linux/atomic-fallback.h
@@ -6,6 +6,8 @@
 #ifndef _LINUX_ATOMIC_FALLBACK_H
 #define _LINUX_ATOMIC_FALLBACK_H
 
+#include <linux/compiler.h>
+
 #ifndef xchg_relaxed
 #define xchg_relaxed		xchg
 #define xchg_acquire		xchg
@@ -76,7 +78,7 @@
 #endif /* cmpxchg64_relaxed */
 
 #ifndef atomic_read_acquire
-static inline int
+static __always_inline int
 atomic_read_acquire(const atomic_t *v)
 {
 	return smp_load_acquire(&(v)->counter);
@@ -85,7 +87,7 @@ atomic_read_acquire(const atomic_t *v)
 #endif
 
 #ifndef atomic_set_release
-static inline void
+static __always_inline void
 atomic_set_release(atomic_t *v, int i)
 {
 	smp_store_release(&(v)->counter, i);
@@ -100,7 +102,7 @@ atomic_set_release(atomic_t *v, int i)
 #else /* atomic_add_return_relaxed */
 
 #ifndef atomic_add_return_acquire
-static inline int
+static __always_inline int
 atomic_add_return_acquire(int i, atomic_t *v)
 {
 	int ret = atomic_add_return_relaxed(i, v);
@@ -111,7 +113,7 @@ atomic_add_return_acquire(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_add_return_release
-static inline int
+static __always_inline int
 atomic_add_return_release(int i, atomic_t *v)
 {
 	__atomic_release_fence();
@@ -121,7 +123,7 @@ atomic_add_return_release(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_add_return
-static inline int
+static __always_inline int
 atomic_add_return(int i, atomic_t *v)
 {
 	int ret;
@@ -142,7 +144,7 @@ atomic_add_return(int i, atomic_t *v)
 #else /* atomic_fetch_add_relaxed */
 
 #ifndef atomic_fetch_add_acquire
-static inline int
+static __always_inline int
 atomic_fetch_add_acquire(int i, atomic_t *v)
 {
 	int ret = atomic_fetch_add_relaxed(i, v);
@@ -153,7 +155,7 @@ atomic_fetch_add_acquire(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_add_release
-static inline int
+static __always_inline int
 atomic_fetch_add_release(int i, atomic_t *v)
 {
 	__atomic_release_fence();
@@ -163,7 +165,7 @@ atomic_fetch_add_release(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_add
-static inline int
+static __always_inline int
 atomic_fetch_add(int i, atomic_t *v)
 {
 	int ret;
@@ -184,7 +186,7 @@ atomic_fetch_add(int i, atomic_t *v)
 #else /* atomic_sub_return_relaxed */
 
 #ifndef atomic_sub_return_acquire
-static inline int
+static __always_inline int
 atomic_sub_return_acquire(int i, atomic_t *v)
 {
 	int ret = atomic_sub_return_relaxed(i, v);
@@ -195,7 +197,7 @@ atomic_sub_return_acquire(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_sub_return_release
-static inline int
+static __always_inline int
 atomic_sub_return_release(int i, atomic_t *v)
 {
 	__atomic_release_fence();
@@ -205,7 +207,7 @@ atomic_sub_return_release(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_sub_return
-static inline int
+static __always_inline int
 atomic_sub_return(int i, atomic_t *v)
 {
 	int ret;
@@ -226,7 +228,7 @@ atomic_sub_return(int i, atomic_t *v)
 #else /* atomic_fetch_sub_relaxed */
 
 #ifndef atomic_fetch_sub_acquire
-static inline int
+static __always_inline int
 atomic_fetch_sub_acquire(int i, atomic_t *v)
 {
 	int ret = atomic_fetch_sub_relaxed(i, v);
@@ -237,7 +239,7 @@ atomic_fetch_sub_acquire(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_sub_release
-static inline int
+static __always_inline int
 atomic_fetch_sub_release(int i, atomic_t *v)
 {
 	__atomic_release_fence();
@@ -247,7 +249,7 @@ atomic_fetch_sub_release(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_sub
-static inline int
+static __always_inline int
 atomic_fetch_sub(int i, atomic_t *v)
 {
 	int ret;
@@ -262,7 +264,7 @@ atomic_fetch_sub(int i, atomic_t *v)
 #endif /* atomic_fetch_sub_relaxed */
 
 #ifndef atomic_inc
-static inline void
+static __always_inline void
 atomic_inc(atomic_t *v)
 {
 	atomic_add(1, v);
@@ -278,7 +280,7 @@ atomic_inc(atomic_t *v)
 #endif /* atomic_inc_return */
 
 #ifndef atomic_inc_return
-static inline int
+static __always_inline int
 atomic_inc_return(atomic_t *v)
 {
 	return atomic_add_return(1, v);
@@ -287,7 +289,7 @@ atomic_inc_return(atomic_t *v)
 #endif
 
 #ifndef atomic_inc_return_acquire
-static inline int
+static __always_inline int
 atomic_inc_return_acquire(atomic_t *v)
 {
 	return atomic_add_return_acquire(1, v);
@@ -296,7 +298,7 @@ atomic_inc_return_acquire(atomic_t *v)
 #endif
 
 #ifndef atomic_inc_return_release
-static inline int
+static __always_inline int
 atomic_inc_return_release(atomic_t *v)
 {
 	return atomic_add_return_release(1, v);
@@ -305,7 +307,7 @@ atomic_inc_return_release(atomic_t *v)
 #endif
 
 #ifndef atomic_inc_return_relaxed
-static inline int
+static __always_inline int
 atomic_inc_return_relaxed(atomic_t *v)
 {
 	return atomic_add_return_relaxed(1, v);
@@ -316,7 +318,7 @@ atomic_inc_return_relaxed(atomic_t *v)
 #else /* atomic_inc_return_relaxed */
 
 #ifndef atomic_inc_return_acquire
-static inline int
+static __always_inline int
 atomic_inc_return_acquire(atomic_t *v)
 {
 	int ret = atomic_inc_return_relaxed(v);
@@ -327,7 +329,7 @@ atomic_inc_return_acquire(atomic_t *v)
 #endif
 
 #ifndef atomic_inc_return_release
-static inline int
+static __always_inline int
 atomic_inc_return_release(atomic_t *v)
 {
 	__atomic_release_fence();
@@ -337,7 +339,7 @@ atomic_inc_return_release(atomic_t *v)
 #endif
 
 #ifndef atomic_inc_return
-static inline int
+static __always_inline int
 atomic_inc_return(atomic_t *v)
 {
 	int ret;
@@ -359,7 +361,7 @@ atomic_inc_return(atomic_t *v)
 #endif /* atomic_fetch_inc */
 
 #ifndef atomic_fetch_inc
-static inline int
+static __always_inline int
 atomic_fetch_inc(atomic_t *v)
 {
 	return atomic_fetch_add(1, v);
@@ -368,7 +370,7 @@ atomic_fetch_inc(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_inc_acquire
-static inline int
+static __always_inline int
 atomic_fetch_inc_acquire(atomic_t *v)
 {
 	return atomic_fetch_add_acquire(1, v);
@@ -377,7 +379,7 @@ atomic_fetch_inc_acquire(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_inc_release
-static inline int
+static __always_inline int
 atomic_fetch_inc_release(atomic_t *v)
 {
 	return atomic_fetch_add_release(1, v);
@@ -386,7 +388,7 @@ atomic_fetch_inc_release(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_inc_relaxed
-static inline int
+static __always_inline int
 atomic_fetch_inc_relaxed(atomic_t *v)
 {
 	return atomic_fetch_add_relaxed(1, v);
@@ -397,7 +399,7 @@ atomic_fetch_inc_relaxed(atomic_t *v)
 #else /* atomic_fetch_inc_relaxed */
 
 #ifndef atomic_fetch_inc_acquire
-static inline int
+static __always_inline int
 atomic_fetch_inc_acquire(atomic_t *v)
 {
 	int ret = atomic_fetch_inc_relaxed(v);
@@ -408,7 +410,7 @@ atomic_fetch_inc_acquire(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_inc_release
-static inline int
+static __always_inline int
 atomic_fetch_inc_release(atomic_t *v)
 {
 	__atomic_release_fence();
@@ -418,7 +420,7 @@ atomic_fetch_inc_release(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_inc
-static inline int
+static __always_inline int
 atomic_fetch_inc(atomic_t *v)
 {
 	int ret;
@@ -433,7 +435,7 @@ atomic_fetch_inc(atomic_t *v)
 #endif /* atomic_fetch_inc_relaxed */
 
 #ifndef atomic_dec
-static inline void
+static __always_inline void
 atomic_dec(atomic_t *v)
 {
 	atomic_sub(1, v);
@@ -449,7 +451,7 @@ atomic_dec(atomic_t *v)
 #endif /* atomic_dec_return */
 
 #ifndef atomic_dec_return
-static inline int
+static __always_inline int
 atomic_dec_return(atomic_t *v)
 {
 	return atomic_sub_return(1, v);
@@ -458,7 +460,7 @@ atomic_dec_return(atomic_t *v)
 #endif
 
 #ifndef atomic_dec_return_acquire
-static inline int
+static __always_inline int
 atomic_dec_return_acquire(atomic_t *v)
 {
 	return atomic_sub_return_acquire(1, v);
@@ -467,7 +469,7 @@ atomic_dec_return_acquire(atomic_t *v)
 #endif
 
 #ifndef atomic_dec_return_release
-static inline int
+static __always_inline int
 atomic_dec_return_release(atomic_t *v)
 {
 	return atomic_sub_return_release(1, v);
@@ -476,7 +478,7 @@ atomic_dec_return_release(atomic_t *v)
 #endif
 
 #ifndef atomic_dec_return_relaxed
-static inline int
+static __always_inline int
 atomic_dec_return_relaxed(atomic_t *v)
 {
 	return atomic_sub_return_relaxed(1, v);
@@ -487,7 +489,7 @@ atomic_dec_return_relaxed(atomic_t *v)
 #else /* atomic_dec_return_relaxed */
 
 #ifndef atomic_dec_return_acquire
-static inline int
+static __always_inline int
 atomic_dec_return_acquire(atomic_t *v)
 {
 	int ret = atomic_dec_return_relaxed(v);
@@ -498,7 +500,7 @@ atomic_dec_return_acquire(atomic_t *v)
 #endif
 
 #ifndef atomic_dec_return_release
-static inline int
+static __always_inline int
 atomic_dec_return_release(atomic_t *v)
 {
 	__atomic_release_fence();
@@ -508,7 +510,7 @@ atomic_dec_return_release(atomic_t *v)
 #endif
 
 #ifndef atomic_dec_return
-static inline int
+static __always_inline int
 atomic_dec_return(atomic_t *v)
 {
 	int ret;
@@ -530,7 +532,7 @@ atomic_dec_return(atomic_t *v)
 #endif /* atomic_fetch_dec */
 
 #ifndef atomic_fetch_dec
-static inline int
+static __always_inline int
 atomic_fetch_dec(atomic_t *v)
 {
 	return atomic_fetch_sub(1, v);
@@ -539,7 +541,7 @@ atomic_fetch_dec(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_dec_acquire
-static inline int
+static __always_inline int
 atomic_fetch_dec_acquire(atomic_t *v)
 {
 	return atomic_fetch_sub_acquire(1, v);
@@ -548,7 +550,7 @@ atomic_fetch_dec_acquire(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_dec_release
-static inline int
+static __always_inline int
 atomic_fetch_dec_release(atomic_t *v)
 {
 	return atomic_fetch_sub_release(1, v);
@@ -557,7 +559,7 @@ atomic_fetch_dec_release(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_dec_relaxed
-static inline int
+static __always_inline int
 atomic_fetch_dec_relaxed(atomic_t *v)
 {
 	return atomic_fetch_sub_relaxed(1, v);
@@ -568,7 +570,7 @@ atomic_fetch_dec_relaxed(atomic_t *v)
 #else /* atomic_fetch_dec_relaxed */
 
 #ifndef atomic_fetch_dec_acquire
-static inline int
+static __always_inline int
 atomic_fetch_dec_acquire(atomic_t *v)
 {
 	int ret = atomic_fetch_dec_relaxed(v);
@@ -579,7 +581,7 @@ atomic_fetch_dec_acquire(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_dec_release
-static inline int
+static __always_inline int
 atomic_fetch_dec_release(atomic_t *v)
 {
 	__atomic_release_fence();
@@ -589,7 +591,7 @@ atomic_fetch_dec_release(atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_dec
-static inline int
+static __always_inline int
 atomic_fetch_dec(atomic_t *v)
 {
 	int ret;
@@ -610,7 +612,7 @@ atomic_fetch_dec(atomic_t *v)
 #else /* atomic_fetch_and_relaxed */
 
 #ifndef atomic_fetch_and_acquire
-static inline int
+static __always_inline int
 atomic_fetch_and_acquire(int i, atomic_t *v)
 {
 	int ret = atomic_fetch_and_relaxed(i, v);
@@ -621,7 +623,7 @@ atomic_fetch_and_acquire(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_and_release
-static inline int
+static __always_inline int
 atomic_fetch_and_release(int i, atomic_t *v)
 {
 	__atomic_release_fence();
@@ -631,7 +633,7 @@ atomic_fetch_and_release(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_and
-static inline int
+static __always_inline int
 atomic_fetch_and(int i, atomic_t *v)
 {
 	int ret;
@@ -646,7 +648,7 @@ atomic_fetch_and(int i, atomic_t *v)
 #endif /* atomic_fetch_and_relaxed */
 
 #ifndef atomic_andnot
-static inline void
+static __always_inline void
 atomic_andnot(int i, atomic_t *v)
 {
 	atomic_and(~i, v);
@@ -662,7 +664,7 @@ atomic_andnot(int i, atomic_t *v)
 #endif /* atomic_fetch_andnot */
 
 #ifndef atomic_fetch_andnot
-static inline int
+static __always_inline int
 atomic_fetch_andnot(int i, atomic_t *v)
 {
 	return atomic_fetch_and(~i, v);
@@ -671,7 +673,7 @@ atomic_fetch_andnot(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_andnot_acquire
-static inline int
+static __always_inline int
 atomic_fetch_andnot_acquire(int i, atomic_t *v)
 {
 	return atomic_fetch_and_acquire(~i, v);
@@ -680,7 +682,7 @@ atomic_fetch_andnot_acquire(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_andnot_release
-static inline int
+static __always_inline int
 atomic_fetch_andnot_release(int i, atomic_t *v)
 {
 	return atomic_fetch_and_release(~i, v);
@@ -689,7 +691,7 @@ atomic_fetch_andnot_release(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_andnot_relaxed
-static inline int
+static __always_inline int
 atomic_fetch_andnot_relaxed(int i, atomic_t *v)
 {
 	return atomic_fetch_and_relaxed(~i, v);
@@ -700,7 +702,7 @@ atomic_fetch_andnot_relaxed(int i, atomic_t *v)
 #else /* atomic_fetch_andnot_relaxed */
 
 #ifndef atomic_fetch_andnot_acquire
-static inline int
+static __always_inline int
 atomic_fetch_andnot_acquire(int i, atomic_t *v)
 {
 	int ret = atomic_fetch_andnot_relaxed(i, v);
@@ -711,7 +713,7 @@ atomic_fetch_andnot_acquire(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_andnot_release
-static inline int
+static __always_inline int
 atomic_fetch_andnot_release(int i, atomic_t *v)
 {
 	__atomic_release_fence();
@@ -721,7 +723,7 @@ atomic_fetch_andnot_release(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_andnot
-static inline int
+static __always_inline int
 atomic_fetch_andnot(int i, atomic_t *v)
 {
 	int ret;
@@ -742,7 +744,7 @@ atomic_fetch_andnot(int i, atomic_t *v)
 #else /* atomic_fetch_or_relaxed */
 
 #ifndef atomic_fetch_or_acquire
-static inline int
+static __always_inline int
 atomic_fetch_or_acquire(int i, atomic_t *v)
 {
 	int ret = atomic_fetch_or_relaxed(i, v);
@@ -753,7 +755,7 @@ atomic_fetch_or_acquire(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_or_release
-static inline int
+static __always_inline int
 atomic_fetch_or_release(int i, atomic_t *v)
 {
 	__atomic_release_fence();
@@ -763,7 +765,7 @@ atomic_fetch_or_release(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_or
-static inline int
+static __always_inline int
 atomic_fetch_or(int i, atomic_t *v)
 {
 	int ret;
@@ -784,7 +786,7 @@ atomic_fetch_or(int i, atomic_t *v)
 #else /* atomic_fetch_xor_relaxed */
 
 #ifndef atomic_fetch_xor_acquire
-static inline int
+static __always_inline int
 atomic_fetch_xor_acquire(int i, atomic_t *v)
 {
 	int ret = atomic_fetch_xor_relaxed(i, v);
@@ -795,7 +797,7 @@ atomic_fetch_xor_acquire(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_xor_release
-static inline int
+static __always_inline int
 atomic_fetch_xor_release(int i, atomic_t *v)
 {
 	__atomic_release_fence();
@@ -805,7 +807,7 @@ atomic_fetch_xor_release(int i, atomic_t *v)
 #endif
 
 #ifndef atomic_fetch_xor
-static inline int
+static __always_inline int
 atomic_fetch_xor(int i, atomic_t *v)
 {
 	int ret;
@@ -826,7 +828,7 @@ atomic_fetch_xor(int i, atomic_t *v)
 #else /* atomic_xchg_relaxed */
 
 #ifndef atomic_xchg_acquire
-static inline int
+static __always_inline int
 atomic_xchg_acquire(atomic_t *v, int i)
 {
 	int ret = atomic_xchg_relaxed(v, i);
@@ -837,7 +839,7 @@ atomic_xchg_acquire(atomic_t *v, int i)
 #endif
 
 #ifndef atomic_xchg_release
-static inline int
+static __always_inline int
 atomic_xchg_release(atomic_t *v, int i)
 {
 	__atomic_release_fence();
@@ -847,7 +849,7 @@ atomic_xchg_release(atomic_t *v, int i)
 #endif
 
 #ifndef atomic_xchg
-static inline int
+static __always_inline int
 atomic_xchg(atomic_t *v, int i)
 {
 	int ret;
@@ -868,7 +870,7 @@ atomic_xchg(atomic_t *v, int i)
 #else /* atomic_cmpxchg_relaxed */
 
 #ifndef atomic_cmpxchg_acquire
-static inline int
+static __always_inline int
 atomic_cmpxchg_acquire(atomic_t *v, int old, int new)
 {
 	int ret = atomic_cmpxchg_relaxed(v, old, new);
@@ -879,7 +881,7 @@ atomic_cmpxchg_acquire(atomic_t *v, int old, int new)
 #endif
 
 #ifndef atomic_cmpxchg_release
-static inline int
+static __always_inline int
 atomic_cmpxchg_release(atomic_t *v, int old, int new)
 {
 	__atomic_release_fence();
@@ -889,7 +891,7 @@ atomic_cmpxchg_release(atomic_t *v, int old, int new)
 #endif
 
 #ifndef atomic_cmpxchg
-static inline int
+static __always_inline int
 atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 	int ret;
@@ -911,7 +913,7 @@ atomic_cmpxchg(atomic_t *v, int old, int new)
 #endif /* atomic_try_cmpxchg */
 
 #ifndef atomic_try_cmpxchg
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg(atomic_t *v, int *old, int new)
 {
 	int r, o = *old;
@@ -924,7 +926,7 @@ atomic_try_cmpxchg(atomic_t *v, int *old, int new)
 #endif
 
 #ifndef atomic_try_cmpxchg_acquire
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg_acquire(atomic_t *v, int *old, int new)
 {
 	int r, o = *old;
@@ -937,7 +939,7 @@ atomic_try_cmpxchg_acquire(atomic_t *v, int *old, int new)
 #endif
 
 #ifndef atomic_try_cmpxchg_release
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg_release(atomic_t *v, int *old, int new)
 {
 	int r, o = *old;
@@ -950,7 +952,7 @@ atomic_try_cmpxchg_release(atomic_t *v, int *old, int new)
 #endif
 
 #ifndef atomic_try_cmpxchg_relaxed
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg_relaxed(atomic_t *v, int *old, int new)
 {
 	int r, o = *old;
@@ -965,7 +967,7 @@ atomic_try_cmpxchg_relaxed(atomic_t *v, int *old, int new)
 #else /* atomic_try_cmpxchg_relaxed */
 
 #ifndef atomic_try_cmpxchg_acquire
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg_acquire(atomic_t *v, int *old, int new)
 {
 	bool ret = atomic_try_cmpxchg_relaxed(v, old, new);
@@ -976,7 +978,7 @@ atomic_try_cmpxchg_acquire(atomic_t *v, int *old, int new)
 #endif
 
 #ifndef atomic_try_cmpxchg_release
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg_release(atomic_t *v, int *old, int new)
 {
 	__atomic_release_fence();
@@ -986,7 +988,7 @@ atomic_try_cmpxchg_release(atomic_t *v, int *old, int new)
 #endif
 
 #ifndef atomic_try_cmpxchg
-static inline bool
+static __always_inline bool
 atomic_try_cmpxchg(atomic_t *v, int *old, int new)
 {
 	bool ret;
@@ -1010,7 +1012,7 @@ atomic_try_cmpxchg(atomic_t *v, int *old, int new)
  * true if the result is zero, or false for all
  * other cases.
  */
-static inline bool
+static __always_inline bool
 atomic_sub_and_test(int i, atomic_t *v)
 {
 	return atomic_sub_return(i, v) == 0;
@@ -1027,7 +1029,7 @@ atomic_sub_and_test(int i, atomic_t *v)
  * returns true if the result is 0, or false for all other
  * cases.
  */
-static inline bool
+static __always_inline bool
 atomic_dec_and_test(atomic_t *v)
 {
 	return atomic_dec_return(v) == 0;
@@ -1044,7 +1046,7 @@ atomic_dec_and_test(atomic_t *v)
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-static inline bool
+static __always_inline bool
 atomic_inc_and_test(atomic_t *v)
 {
 	return atomic_inc_return(v) == 0;
@@ -1062,7 +1064,7 @@ atomic_inc_and_test(atomic_t *v)
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-static inline bool
+static __always_inline bool
 atomic_add_negative(int i, atomic_t *v)
 {
 	return atomic_add_return(i, v) < 0;
@@ -1080,7 +1082,7 @@ atomic_add_negative(int i, atomic_t *v)
  * Atomically adds @a to @v, so long as @v was not already @u.
  * Returns original value of @v
  */
-static inline int
+static __always_inline int
 atomic_fetch_add_unless(atomic_t *v, int a, int u)
 {
 	int c = atomic_read(v);
@@ -1105,7 +1107,7 @@ atomic_fetch_add_unless(atomic_t *v, int a, int u)
  * Atomically adds @a to @v, if @v was not already @u.
  * Returns true if the addition was done.
  */
-static inline bool
+static __always_inline bool
 atomic_add_unless(atomic_t *v, int a, int u)
 {
 	return atomic_fetch_add_unless(v, a, u) != u;
@@ -1121,7 +1123,7 @@ atomic_add_unless(atomic_t *v, int a, int u)
  * Atomically increments @v by 1, if @v is non-zero.
  * Returns true if the increment was done.
  */
-static inline bool
+static __always_inline bool
 atomic_inc_not_zero(atomic_t *v)
 {
 	return atomic_add_unless(v, 1, 0);
@@ -1130,7 +1132,7 @@ atomic_inc_not_zero(atomic_t *v)
 #endif
 
 #ifndef atomic_inc_unless_negative
-static inline bool
+static __always_inline bool
 atomic_inc_unless_negative(atomic_t *v)
 {
 	int c = atomic_read(v);
@@ -1146,7 +1148,7 @@ atomic_inc_unless_negative(atomic_t *v)
 #endif
 
 #ifndef atomic_dec_unless_positive
-static inline bool
+static __always_inline bool
 atomic_dec_unless_positive(atomic_t *v)
 {
 	int c = atomic_read(v);
@@ -1162,7 +1164,7 @@ atomic_dec_unless_positive(atomic_t *v)
 #endif
 
 #ifndef atomic_dec_if_positive
-static inline int
+static __always_inline int
 atomic_dec_if_positive(atomic_t *v)
 {
 	int dec, c = atomic_read(v);
@@ -1186,7 +1188,7 @@ atomic_dec_if_positive(atomic_t *v)
 #endif
 
 #ifndef atomic64_read_acquire
-static inline s64
+static __always_inline s64
 atomic64_read_acquire(const atomic64_t *v)
 {
 	return smp_load_acquire(&(v)->counter);
@@ -1195,7 +1197,7 @@ atomic64_read_acquire(const atomic64_t *v)
 #endif
 
 #ifndef atomic64_set_release
-static inline void
+static __always_inline void
 atomic64_set_release(atomic64_t *v, s64 i)
 {
 	smp_store_release(&(v)->counter, i);
@@ -1210,7 +1212,7 @@ atomic64_set_release(atomic64_t *v, s64 i)
 #else /* atomic64_add_return_relaxed */
 
 #ifndef atomic64_add_return_acquire
-static inline s64
+static __always_inline s64
 atomic64_add_return_acquire(s64 i, atomic64_t *v)
 {
 	s64 ret = atomic64_add_return_relaxed(i, v);
@@ -1221,7 +1223,7 @@ atomic64_add_return_acquire(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_add_return_release
-static inline s64
+static __always_inline s64
 atomic64_add_return_release(s64 i, atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1231,7 +1233,7 @@ atomic64_add_return_release(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_add_return
-static inline s64
+static __always_inline s64
 atomic64_add_return(s64 i, atomic64_t *v)
 {
 	s64 ret;
@@ -1252,7 +1254,7 @@ atomic64_add_return(s64 i, atomic64_t *v)
 #else /* atomic64_fetch_add_relaxed */
 
 #ifndef atomic64_fetch_add_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_add_acquire(s64 i, atomic64_t *v)
 {
 	s64 ret = atomic64_fetch_add_relaxed(i, v);
@@ -1263,7 +1265,7 @@ atomic64_fetch_add_acquire(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_add_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_add_release(s64 i, atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1273,7 +1275,7 @@ atomic64_fetch_add_release(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_add
-static inline s64
+static __always_inline s64
 atomic64_fetch_add(s64 i, atomic64_t *v)
 {
 	s64 ret;
@@ -1294,7 +1296,7 @@ atomic64_fetch_add(s64 i, atomic64_t *v)
 #else /* atomic64_sub_return_relaxed */
 
 #ifndef atomic64_sub_return_acquire
-static inline s64
+static __always_inline s64
 atomic64_sub_return_acquire(s64 i, atomic64_t *v)
 {
 	s64 ret = atomic64_sub_return_relaxed(i, v);
@@ -1305,7 +1307,7 @@ atomic64_sub_return_acquire(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_sub_return_release
-static inline s64
+static __always_inline s64
 atomic64_sub_return_release(s64 i, atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1315,7 +1317,7 @@ atomic64_sub_return_release(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_sub_return
-static inline s64
+static __always_inline s64
 atomic64_sub_return(s64 i, atomic64_t *v)
 {
 	s64 ret;
@@ -1336,7 +1338,7 @@ atomic64_sub_return(s64 i, atomic64_t *v)
 #else /* atomic64_fetch_sub_relaxed */
 
 #ifndef atomic64_fetch_sub_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_sub_acquire(s64 i, atomic64_t *v)
 {
 	s64 ret = atomic64_fetch_sub_relaxed(i, v);
@@ -1347,7 +1349,7 @@ atomic64_fetch_sub_acquire(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_sub_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_sub_release(s64 i, atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1357,7 +1359,7 @@ atomic64_fetch_sub_release(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_sub
-static inline s64
+static __always_inline s64
 atomic64_fetch_sub(s64 i, atomic64_t *v)
 {
 	s64 ret;
@@ -1372,7 +1374,7 @@ atomic64_fetch_sub(s64 i, atomic64_t *v)
 #endif /* atomic64_fetch_sub_relaxed */
 
 #ifndef atomic64_inc
-static inline void
+static __always_inline void
 atomic64_inc(atomic64_t *v)
 {
 	atomic64_add(1, v);
@@ -1388,7 +1390,7 @@ atomic64_inc(atomic64_t *v)
 #endif /* atomic64_inc_return */
 
 #ifndef atomic64_inc_return
-static inline s64
+static __always_inline s64
 atomic64_inc_return(atomic64_t *v)
 {
 	return atomic64_add_return(1, v);
@@ -1397,7 +1399,7 @@ atomic64_inc_return(atomic64_t *v)
 #endif
 
 #ifndef atomic64_inc_return_acquire
-static inline s64
+static __always_inline s64
 atomic64_inc_return_acquire(atomic64_t *v)
 {
 	return atomic64_add_return_acquire(1, v);
@@ -1406,7 +1408,7 @@ atomic64_inc_return_acquire(atomic64_t *v)
 #endif
 
 #ifndef atomic64_inc_return_release
-static inline s64
+static __always_inline s64
 atomic64_inc_return_release(atomic64_t *v)
 {
 	return atomic64_add_return_release(1, v);
@@ -1415,7 +1417,7 @@ atomic64_inc_return_release(atomic64_t *v)
 #endif
 
 #ifndef atomic64_inc_return_relaxed
-static inline s64
+static __always_inline s64
 atomic64_inc_return_relaxed(atomic64_t *v)
 {
 	return atomic64_add_return_relaxed(1, v);
@@ -1426,7 +1428,7 @@ atomic64_inc_return_relaxed(atomic64_t *v)
 #else /* atomic64_inc_return_relaxed */
 
 #ifndef atomic64_inc_return_acquire
-static inline s64
+static __always_inline s64
 atomic64_inc_return_acquire(atomic64_t *v)
 {
 	s64 ret = atomic64_inc_return_relaxed(v);
@@ -1437,7 +1439,7 @@ atomic64_inc_return_acquire(atomic64_t *v)
 #endif
 
 #ifndef atomic64_inc_return_release
-static inline s64
+static __always_inline s64
 atomic64_inc_return_release(atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1447,7 +1449,7 @@ atomic64_inc_return_release(atomic64_t *v)
 #endif
 
 #ifndef atomic64_inc_return
-static inline s64
+static __always_inline s64
 atomic64_inc_return(atomic64_t *v)
 {
 	s64 ret;
@@ -1469,7 +1471,7 @@ atomic64_inc_return(atomic64_t *v)
 #endif /* atomic64_fetch_inc */
 
 #ifndef atomic64_fetch_inc
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc(atomic64_t *v)
 {
 	return atomic64_fetch_add(1, v);
@@ -1478,7 +1480,7 @@ atomic64_fetch_inc(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_inc_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc_acquire(atomic64_t *v)
 {
 	return atomic64_fetch_add_acquire(1, v);
@@ -1487,7 +1489,7 @@ atomic64_fetch_inc_acquire(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_inc_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc_release(atomic64_t *v)
 {
 	return atomic64_fetch_add_release(1, v);
@@ -1496,7 +1498,7 @@ atomic64_fetch_inc_release(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_inc_relaxed
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc_relaxed(atomic64_t *v)
 {
 	return atomic64_fetch_add_relaxed(1, v);
@@ -1507,7 +1509,7 @@ atomic64_fetch_inc_relaxed(atomic64_t *v)
 #else /* atomic64_fetch_inc_relaxed */
 
 #ifndef atomic64_fetch_inc_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc_acquire(atomic64_t *v)
 {
 	s64 ret = atomic64_fetch_inc_relaxed(v);
@@ -1518,7 +1520,7 @@ atomic64_fetch_inc_acquire(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_inc_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc_release(atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1528,7 +1530,7 @@ atomic64_fetch_inc_release(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_inc
-static inline s64
+static __always_inline s64
 atomic64_fetch_inc(atomic64_t *v)
 {
 	s64 ret;
@@ -1543,7 +1545,7 @@ atomic64_fetch_inc(atomic64_t *v)
 #endif /* atomic64_fetch_inc_relaxed */
 
 #ifndef atomic64_dec
-static inline void
+static __always_inline void
 atomic64_dec(atomic64_t *v)
 {
 	atomic64_sub(1, v);
@@ -1559,7 +1561,7 @@ atomic64_dec(atomic64_t *v)
 #endif /* atomic64_dec_return */
 
 #ifndef atomic64_dec_return
-static inline s64
+static __always_inline s64
 atomic64_dec_return(atomic64_t *v)
 {
 	return atomic64_sub_return(1, v);
@@ -1568,7 +1570,7 @@ atomic64_dec_return(atomic64_t *v)
 #endif
 
 #ifndef atomic64_dec_return_acquire
-static inline s64
+static __always_inline s64
 atomic64_dec_return_acquire(atomic64_t *v)
 {
 	return atomic64_sub_return_acquire(1, v);
@@ -1577,7 +1579,7 @@ atomic64_dec_return_acquire(atomic64_t *v)
 #endif
 
 #ifndef atomic64_dec_return_release
-static inline s64
+static __always_inline s64
 atomic64_dec_return_release(atomic64_t *v)
 {
 	return atomic64_sub_return_release(1, v);
@@ -1586,7 +1588,7 @@ atomic64_dec_return_release(atomic64_t *v)
 #endif
 
 #ifndef atomic64_dec_return_relaxed
-static inline s64
+static __always_inline s64
 atomic64_dec_return_relaxed(atomic64_t *v)
 {
 	return atomic64_sub_return_relaxed(1, v);
@@ -1597,7 +1599,7 @@ atomic64_dec_return_relaxed(atomic64_t *v)
 #else /* atomic64_dec_return_relaxed */
 
 #ifndef atomic64_dec_return_acquire
-static inline s64
+static __always_inline s64
 atomic64_dec_return_acquire(atomic64_t *v)
 {
 	s64 ret = atomic64_dec_return_relaxed(v);
@@ -1608,7 +1610,7 @@ atomic64_dec_return_acquire(atomic64_t *v)
 #endif
 
 #ifndef atomic64_dec_return_release
-static inline s64
+static __always_inline s64
 atomic64_dec_return_release(atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1618,7 +1620,7 @@ atomic64_dec_return_release(atomic64_t *v)
 #endif
 
 #ifndef atomic64_dec_return
-static inline s64
+static __always_inline s64
 atomic64_dec_return(atomic64_t *v)
 {
 	s64 ret;
@@ -1640,7 +1642,7 @@ atomic64_dec_return(atomic64_t *v)
 #endif /* atomic64_fetch_dec */
 
 #ifndef atomic64_fetch_dec
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec(atomic64_t *v)
 {
 	return atomic64_fetch_sub(1, v);
@@ -1649,7 +1651,7 @@ atomic64_fetch_dec(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_dec_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec_acquire(atomic64_t *v)
 {
 	return atomic64_fetch_sub_acquire(1, v);
@@ -1658,7 +1660,7 @@ atomic64_fetch_dec_acquire(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_dec_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec_release(atomic64_t *v)
 {
 	return atomic64_fetch_sub_release(1, v);
@@ -1667,7 +1669,7 @@ atomic64_fetch_dec_release(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_dec_relaxed
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec_relaxed(atomic64_t *v)
 {
 	return atomic64_fetch_sub_relaxed(1, v);
@@ -1678,7 +1680,7 @@ atomic64_fetch_dec_relaxed(atomic64_t *v)
 #else /* atomic64_fetch_dec_relaxed */
 
 #ifndef atomic64_fetch_dec_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec_acquire(atomic64_t *v)
 {
 	s64 ret = atomic64_fetch_dec_relaxed(v);
@@ -1689,7 +1691,7 @@ atomic64_fetch_dec_acquire(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_dec_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec_release(atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1699,7 +1701,7 @@ atomic64_fetch_dec_release(atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_dec
-static inline s64
+static __always_inline s64
 atomic64_fetch_dec(atomic64_t *v)
 {
 	s64 ret;
@@ -1720,7 +1722,7 @@ atomic64_fetch_dec(atomic64_t *v)
 #else /* atomic64_fetch_and_relaxed */
 
 #ifndef atomic64_fetch_and_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_and_acquire(s64 i, atomic64_t *v)
 {
 	s64 ret = atomic64_fetch_and_relaxed(i, v);
@@ -1731,7 +1733,7 @@ atomic64_fetch_and_acquire(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_and_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_and_release(s64 i, atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1741,7 +1743,7 @@ atomic64_fetch_and_release(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_and
-static inline s64
+static __always_inline s64
 atomic64_fetch_and(s64 i, atomic64_t *v)
 {
 	s64 ret;
@@ -1756,7 +1758,7 @@ atomic64_fetch_and(s64 i, atomic64_t *v)
 #endif /* atomic64_fetch_and_relaxed */
 
 #ifndef atomic64_andnot
-static inline void
+static __always_inline void
 atomic64_andnot(s64 i, atomic64_t *v)
 {
 	atomic64_and(~i, v);
@@ -1772,7 +1774,7 @@ atomic64_andnot(s64 i, atomic64_t *v)
 #endif /* atomic64_fetch_andnot */
 
 #ifndef atomic64_fetch_andnot
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot(s64 i, atomic64_t *v)
 {
 	return atomic64_fetch_and(~i, v);
@@ -1781,7 +1783,7 @@ atomic64_fetch_andnot(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_andnot_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot_acquire(s64 i, atomic64_t *v)
 {
 	return atomic64_fetch_and_acquire(~i, v);
@@ -1790,7 +1792,7 @@ atomic64_fetch_andnot_acquire(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_andnot_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot_release(s64 i, atomic64_t *v)
 {
 	return atomic64_fetch_and_release(~i, v);
@@ -1799,7 +1801,7 @@ atomic64_fetch_andnot_release(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_andnot_relaxed
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot_relaxed(s64 i, atomic64_t *v)
 {
 	return atomic64_fetch_and_relaxed(~i, v);
@@ -1810,7 +1812,7 @@ atomic64_fetch_andnot_relaxed(s64 i, atomic64_t *v)
 #else /* atomic64_fetch_andnot_relaxed */
 
 #ifndef atomic64_fetch_andnot_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot_acquire(s64 i, atomic64_t *v)
 {
 	s64 ret = atomic64_fetch_andnot_relaxed(i, v);
@@ -1821,7 +1823,7 @@ atomic64_fetch_andnot_acquire(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_andnot_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot_release(s64 i, atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1831,7 +1833,7 @@ atomic64_fetch_andnot_release(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_andnot
-static inline s64
+static __always_inline s64
 atomic64_fetch_andnot(s64 i, atomic64_t *v)
 {
 	s64 ret;
@@ -1852,7 +1854,7 @@ atomic64_fetch_andnot(s64 i, atomic64_t *v)
 #else /* atomic64_fetch_or_relaxed */
 
 #ifndef atomic64_fetch_or_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_or_acquire(s64 i, atomic64_t *v)
 {
 	s64 ret = atomic64_fetch_or_relaxed(i, v);
@@ -1863,7 +1865,7 @@ atomic64_fetch_or_acquire(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_or_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_or_release(s64 i, atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1873,7 +1875,7 @@ atomic64_fetch_or_release(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_or
-static inline s64
+static __always_inline s64
 atomic64_fetch_or(s64 i, atomic64_t *v)
 {
 	s64 ret;
@@ -1894,7 +1896,7 @@ atomic64_fetch_or(s64 i, atomic64_t *v)
 #else /* atomic64_fetch_xor_relaxed */
 
 #ifndef atomic64_fetch_xor_acquire
-static inline s64
+static __always_inline s64
 atomic64_fetch_xor_acquire(s64 i, atomic64_t *v)
 {
 	s64 ret = atomic64_fetch_xor_relaxed(i, v);
@@ -1905,7 +1907,7 @@ atomic64_fetch_xor_acquire(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_xor_release
-static inline s64
+static __always_inline s64
 atomic64_fetch_xor_release(s64 i, atomic64_t *v)
 {
 	__atomic_release_fence();
@@ -1915,7 +1917,7 @@ atomic64_fetch_xor_release(s64 i, atomic64_t *v)
 #endif
 
 #ifndef atomic64_fetch_xor
-static inline s64
+static __always_inline s64
 atomic64_fetch_xor(s64 i, atomic64_t *v)
 {
 	s64 ret;
@@ -1936,7 +1938,7 @@ atomic64_fetch_xor(s64 i, atomic64_t *v)
 #else /* atomic64_xchg_relaxed */
 
 #ifndef atomic64_xchg_acquire
-static inline s64
+static __always_inline s64
 atomic64_xchg_acquire(atomic64_t *v, s64 i)
 {
 	s64 ret = atomic64_xchg_relaxed(v, i);
@@ -1947,7 +1949,7 @@ atomic64_xchg_acquire(atomic64_t *v, s64 i)
 #endif
 
 #ifndef atomic64_xchg_release
-static inline s64
+static __always_inline s64
 atomic64_xchg_release(atomic64_t *v, s64 i)
 {
 	__atomic_release_fence();
@@ -1957,7 +1959,7 @@ atomic64_xchg_release(atomic64_t *v, s64 i)
 #endif
 
 #ifndef atomic64_xchg
-static inline s64
+static __always_inline s64
 atomic64_xchg(atomic64_t *v, s64 i)
 {
 	s64 ret;
@@ -1978,7 +1980,7 @@ atomic64_xchg(atomic64_t *v, s64 i)
 #else /* atomic64_cmpxchg_relaxed */
 
 #ifndef atomic64_cmpxchg_acquire
-static inline s64
+static __always_inline s64
 atomic64_cmpxchg_acquire(atomic64_t *v, s64 old, s64 new)
 {
 	s64 ret = atomic64_cmpxchg_relaxed(v, old, new);
@@ -1989,7 +1991,7 @@ atomic64_cmpxchg_acquire(atomic64_t *v, s64 old, s64 new)
 #endif
 
 #ifndef atomic64_cmpxchg_release
-static inline s64
+static __always_inline s64
 atomic64_cmpxchg_release(atomic64_t *v, s64 old, s64 new)
 {
 	__atomic_release_fence();
@@ -1999,7 +2001,7 @@ atomic64_cmpxchg_release(atomic64_t *v, s64 old, s64 new)
 #endif
 
 #ifndef atomic64_cmpxchg
-static inline s64
+static __always_inline s64
 atomic64_cmpxchg(atomic64_t *v, s64 old, s64 new)
 {
 	s64 ret;
@@ -2021,7 +2023,7 @@ atomic64_cmpxchg(atomic64_t *v, s64 old, s64 new)
 #endif /* atomic64_try_cmpxchg */
 
 #ifndef atomic64_try_cmpxchg
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg(atomic64_t *v, s64 *old, s64 new)
 {
 	s64 r, o = *old;
@@ -2034,7 +2036,7 @@ atomic64_try_cmpxchg(atomic64_t *v, s64 *old, s64 new)
 #endif
 
 #ifndef atomic64_try_cmpxchg_acquire
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg_acquire(atomic64_t *v, s64 *old, s64 new)
 {
 	s64 r, o = *old;
@@ -2047,7 +2049,7 @@ atomic64_try_cmpxchg_acquire(atomic64_t *v, s64 *old, s64 new)
 #endif
 
 #ifndef atomic64_try_cmpxchg_release
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg_release(atomic64_t *v, s64 *old, s64 new)
 {
 	s64 r, o = *old;
@@ -2060,7 +2062,7 @@ atomic64_try_cmpxchg_release(atomic64_t *v, s64 *old, s64 new)
 #endif
 
 #ifndef atomic64_try_cmpxchg_relaxed
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg_relaxed(atomic64_t *v, s64 *old, s64 new)
 {
 	s64 r, o = *old;
@@ -2075,7 +2077,7 @@ atomic64_try_cmpxchg_relaxed(atomic64_t *v, s64 *old, s64 new)
 #else /* atomic64_try_cmpxchg_relaxed */
 
 #ifndef atomic64_try_cmpxchg_acquire
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg_acquire(atomic64_t *v, s64 *old, s64 new)
 {
 	bool ret = atomic64_try_cmpxchg_relaxed(v, old, new);
@@ -2086,7 +2088,7 @@ atomic64_try_cmpxchg_acquire(atomic64_t *v, s64 *old, s64 new)
 #endif
 
 #ifndef atomic64_try_cmpxchg_release
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg_release(atomic64_t *v, s64 *old, s64 new)
 {
 	__atomic_release_fence();
@@ -2096,7 +2098,7 @@ atomic64_try_cmpxchg_release(atomic64_t *v, s64 *old, s64 new)
 #endif
 
 #ifndef atomic64_try_cmpxchg
-static inline bool
+static __always_inline bool
 atomic64_try_cmpxchg(atomic64_t *v, s64 *old, s64 new)
 {
 	bool ret;
@@ -2120,7 +2122,7 @@ atomic64_try_cmpxchg(atomic64_t *v, s64 *old, s64 new)
  * true if the result is zero, or false for all
  * other cases.
  */
-static inline bool
+static __always_inline bool
 atomic64_sub_and_test(s64 i, atomic64_t *v)
 {
 	return atomic64_sub_return(i, v) == 0;
@@ -2137,7 +2139,7 @@ atomic64_sub_and_test(s64 i, atomic64_t *v)
  * returns true if the result is 0, or false for all other
  * cases.
  */
-static inline bool
+static __always_inline bool
 atomic64_dec_and_test(atomic64_t *v)
 {
 	return atomic64_dec_return(v) == 0;
@@ -2154,7 +2156,7 @@ atomic64_dec_and_test(atomic64_t *v)
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-static inline bool
+static __always_inline bool
 atomic64_inc_and_test(atomic64_t *v)
 {
 	return atomic64_inc_return(v) == 0;
@@ -2172,7 +2174,7 @@ atomic64_inc_and_test(atomic64_t *v)
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-static inline bool
+static __always_inline bool
 atomic64_add_negative(s64 i, atomic64_t *v)
 {
 	return atomic64_add_return(i, v) < 0;
@@ -2190,7 +2192,7 @@ atomic64_add_negative(s64 i, atomic64_t *v)
  * Atomically adds @a to @v, so long as @v was not already @u.
  * Returns original value of @v
  */
-static inline s64
+static __always_inline s64
 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 c = atomic64_read(v);
@@ -2215,7 +2217,7 @@ atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
  * Atomically adds @a to @v, if @v was not already @u.
  * Returns true if the addition was done.
  */
-static inline bool
+static __always_inline bool
 atomic64_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	return atomic64_fetch_add_unless(v, a, u) != u;
@@ -2231,7 +2233,7 @@ atomic64_add_unless(atomic64_t *v, s64 a, s64 u)
  * Atomically increments @v by 1, if @v is non-zero.
  * Returns true if the increment was done.
  */
-static inline bool
+static __always_inline bool
 atomic64_inc_not_zero(atomic64_t *v)
 {
 	return atomic64_add_unless(v, 1, 0);
@@ -2240,7 +2242,7 @@ atomic64_inc_not_zero(atomic64_t *v)
 #endif
 
 #ifndef atomic64_inc_unless_negative
-static inline bool
+static __always_inline bool
 atomic64_inc_unless_negative(atomic64_t *v)
 {
 	s64 c = atomic64_read(v);
@@ -2256,7 +2258,7 @@ atomic64_inc_unless_negative(atomic64_t *v)
 #endif
 
 #ifndef atomic64_dec_unless_positive
-static inline bool
+static __always_inline bool
 atomic64_dec_unless_positive(atomic64_t *v)
 {
 	s64 c = atomic64_read(v);
@@ -2272,7 +2274,7 @@ atomic64_dec_unless_positive(atomic64_t *v)
 #endif
 
 #ifndef atomic64_dec_if_positive
-static inline s64
+static __always_inline s64
 atomic64_dec_if_positive(atomic64_t *v)
 {
 	s64 dec, c = atomic64_read(v);
@@ -2292,4 +2294,4 @@ atomic64_dec_if_positive(atomic64_t *v)
 #define atomic64_cond_read_relaxed(v, c) smp_cond_load_relaxed(&(v)->counter, (c))
 
 #endif /* _LINUX_ATOMIC_FALLBACK_H */
-// 25de4a2804d70f57e994fe3b419148658bb5378a
+// baaf45f4c24ed88ceae58baca39d7fd80bb8101b
diff --git a/include/linux/audit.h b/include/linux/audit.h
index f9ceae57ca8d..3fcd9ee49734 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -19,7 +19,7 @@
 struct audit_sig_info {
 	uid_t		uid;
 	pid_t		pid;
-	char		ctx[0];
+	char		ctx[];
 };
 
 struct audit_buffer;
@@ -94,6 +94,12 @@ struct audit_ntp_data {
 struct audit_ntp_data {};
 #endif
 
+enum audit_nfcfgop {
+	AUDIT_XT_OP_REGISTER,
+	AUDIT_XT_OP_REPLACE,
+	AUDIT_XT_OP_UNREGISTER,
+};
+
 extern int is_audit_feature_set(int which);
 
 extern int __init audit_register_class(int class, unsigned *list);
@@ -379,6 +385,8 @@ extern void __audit_log_kern_module(char *name);
 extern void __audit_fanotify(unsigned int response);
 extern void __audit_tk_injoffset(struct timespec64 offset);
 extern void __audit_ntp_log(const struct audit_ntp_data *ad);
+extern void __audit_log_nfcfg(const char *name, u8 af, unsigned int nentries,
+			      enum audit_nfcfgop op);
 
 static inline void audit_ipc_obj(struct kern_ipc_perm *ipcp)
 {
@@ -514,6 +522,14 @@ static inline void audit_ntp_log(const struct audit_ntp_data *ad)
 		__audit_ntp_log(ad);
 }
 
+static inline void audit_log_nfcfg(const char *name, u8 af,
+				   unsigned int nentries,
+				   enum audit_nfcfgop op)
+{
+	if (audit_enabled)
+		__audit_log_nfcfg(name, af, nentries, op);
+}
+
 extern int audit_n_rules;
 extern int audit_signals;
 #else /* CONFIG_AUDITSYSCALL */
@@ -646,6 +662,12 @@ static inline void audit_ntp_log(const struct audit_ntp_data *ad)
 
 static inline void audit_ptrace(struct task_struct *t)
 { }
+
+static inline void audit_log_nfcfg(const char *name, u8 af,
+				   unsigned int nentries,
+				   enum audit_nfcfgop op)
+{ }
+
 #define audit_n_rules 0
 #define audit_signals 0
 #endif /* CONFIG_AUDITSYSCALL */
diff --git a/include/linux/bio.h b/include/linux/bio.h
index a0ee494a6329..8e23f51ccfa4 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -169,6 +169,14 @@ static inline void bio_advance_iter(struct bio *bio, struct bvec_iter *iter,
 #define bio_for_each_bvec(bvl, bio, iter)			\
 	__bio_for_each_bvec(bvl, bio, iter, (bio)->bi_iter)
 
+/*
+ * Iterate over all multi-page bvecs. Drivers shouldn't use this version for the
+ * same reasons as bio_for_each_segment_all().
+ */
+#define bio_for_each_bvec_all(bvl, bio, i)		\
+	for (i = 0, bvl = bio_first_bvec_all(bio);	\
+	     i < (bio)->bi_vcnt; i++, bvl++)		\
+
 #define bio_iter_last(bvec, iter) ((iter).bi_size == (bvec).bv_len)
 
 static inline unsigned bio_segments(struct bio *bio)
diff --git a/include/linux/blk-cgroup.h b/include/linux/blk-cgroup.h
index 35f8ffe92b70..4deb8bb7b6af 100644
--- a/include/linux/blk-cgroup.h
+++ b/include/linux/blk-cgroup.h
@@ -607,12 +607,14 @@ static inline bool blkcg_bio_issue_check(struct request_queue *q,
 		u64_stats_update_begin(&bis->sync);
 
 		/*
-		 * If the bio is flagged with BIO_QUEUE_ENTERED it means this
-		 * is a split bio and we would have already accounted for the
-		 * size of the bio.
+		 * If the bio is flagged with BIO_CGROUP_ACCT it means this is a
+		 * split bio and we would have already accounted for the size of
+		 * the bio.
 		 */
-		if (!bio_flagged(bio, BIO_QUEUE_ENTERED))
+		if (!bio_flagged(bio, BIO_CGROUP_ACCT)) {
+			bio_set_flag(bio, BIO_CGROUP_ACCT);
 			bis->cur.bytes[rwd] += bio->bi_iter.bi_size;
+		}
 		bis->cur.ios[rwd]++;
 
 		u64_stats_update_end(&bis->sync);
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index b45148ba3291..d7307795439a 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -508,6 +508,7 @@ void blk_mq_unquiesce_queue(struct request_queue *q);
 void blk_mq_delay_run_hw_queue(struct blk_mq_hw_ctx *hctx, unsigned long msecs);
 void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async);
 void blk_mq_run_hw_queues(struct request_queue *q, bool async);
+void blk_mq_delay_run_hw_queues(struct request_queue *q, unsigned long msecs);
 void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
 		busy_tag_iter_fn *fn, void *priv);
 void blk_mq_tagset_wait_completed_request(struct blk_mq_tag_set *tagset);
@@ -577,4 +578,6 @@ static inline void blk_mq_cleanup_rq(struct request *rq)
 		rq->q->mq_ops->cleanup_rq(rq);
 }
 
+blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio);
+
 #endif
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 31eb92876be7..90895d594e64 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -220,7 +220,7 @@ enum {
 				 * throttling rules. Don't do it again. */
 	BIO_TRACE_COMPLETION,	/* bio_endio() should trace the final completion
 				 * of this bio. */
-	BIO_QUEUE_ENTERED,	/* can use blk_queue_enter_live() */
+	BIO_CGROUP_ACCT,	/* has been accounted to a cgroup */
 	BIO_TRACKED,		/* set if bio goes through the rq_qos path */
 	BIO_FLAG_LAST
 };
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 32868fbedc9e..f00bd4042295 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -82,8 +82,6 @@ typedef __u32 __bitwise req_flags_t;
 /* set for "ide_preempt" requests and also for requests for which the SCSI
    "quiesce" state must be ignored. */
 #define RQF_PREEMPT		((__force req_flags_t)(1 << 8))
-/* contains copies of user pages */
-#define RQF_COPY_USER		((__force req_flags_t)(1 << 9))
 /* vaguely specified driver internal error.  Ignored by the block layer */
 #define RQF_FAILED		((__force req_flags_t)(1 << 10))
 /* don't warn about errors */
@@ -226,8 +224,6 @@ struct request {
 	unsigned short write_hint;
 	unsigned short ioprio;
 
-	unsigned int extra_len;	/* length of alignment and padding */
-
 	enum mq_rq_state state;
 	refcount_t ref;
 
@@ -290,7 +286,6 @@ struct blk_queue_ctx;
 typedef blk_qc_t (make_request_fn) (struct request_queue *q, struct bio *bio);
 
 struct bio_vec;
-typedef int (dma_drain_needed_fn)(struct request *);
 
 enum blk_eh_timer_return {
 	BLK_EH_DONE,		/* drivers has completed the command */
@@ -399,7 +394,6 @@ struct request_queue {
 	struct rq_qos		*rq_qos;
 
 	make_request_fn		*make_request_fn;
-	dma_drain_needed_fn	*dma_drain_needed;
 
 	const struct blk_mq_ops	*mq_ops;
 
@@ -469,8 +463,6 @@ struct request_queue {
 	 */
 	unsigned long		nr_requests;	/* Max # of requests */
 
-	unsigned int		dma_drain_size;
-	void			*dma_drain_buffer;
 	unsigned int		dma_pad_mask;
 	unsigned int		dma_alignment;
 
@@ -1099,9 +1091,6 @@ extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 			      sector_t offset);
 extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
 extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
-extern int blk_queue_dma_drain(struct request_queue *q,
-			       dma_drain_needed_fn *dma_drain_needed,
-			       void *buf, unsigned int size);
 extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
 extern void blk_queue_virt_boundary(struct request_queue *, unsigned long);
 extern void blk_queue_dma_alignment(struct request_queue *, int);
@@ -1138,7 +1127,15 @@ static inline unsigned short blk_rq_nr_discard_segments(struct request *rq)
 	return max_t(unsigned short, rq->nr_phys_segments, 1);
 }
 
-extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *);
+int __blk_rq_map_sg(struct request_queue *q, struct request *rq,
+		struct scatterlist *sglist, struct scatterlist **last_sg);
+static inline int blk_rq_map_sg(struct request_queue *q, struct request *rq,
+		struct scatterlist *sglist)
+{
+	struct scatterlist *last_sg = NULL;
+
+	return __blk_rq_map_sg(q, rq, sglist, &last_sg);
+}
 extern void blk_dump_rq_flags(struct request *, char *);
 extern long nr_blockdev_pages(void);
 
diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h
index c11b413d5b1a..272626cc3fc9 100644
--- a/include/linux/bpf-cgroup.h
+++ b/include/linux/bpf-cgroup.h
@@ -57,8 +57,6 @@ struct bpf_cgroup_link {
 	enum bpf_attach_type type;
 };
 
-extern const struct bpf_link_ops bpf_cgroup_link_lops;
-
 struct bpf_prog_list {
 	struct list_head node;
 	struct bpf_prog *prog;
@@ -100,8 +98,6 @@ int __cgroup_bpf_attach(struct cgroup *cgrp,
 int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,
 			struct bpf_cgroup_link *link,
 			enum bpf_attach_type type);
-int __cgroup_bpf_replace(struct cgroup *cgrp, struct bpf_cgroup_link *link,
-			 struct bpf_prog *new_prog);
 int __cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr,
 		       union bpf_attr __user *uattr);
 
@@ -112,8 +108,6 @@ int cgroup_bpf_attach(struct cgroup *cgrp,
 		      u32 flags);
 int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,
 		      enum bpf_attach_type type);
-int cgroup_bpf_replace(struct bpf_link *link, struct bpf_prog *old_prog,
-		       struct bpf_prog *new_prog);
 int cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr,
 		     union bpf_attr __user *uattr);
 
@@ -138,8 +132,7 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor,
 
 int __cgroup_bpf_run_filter_sysctl(struct ctl_table_header *head,
 				   struct ctl_table *table, int write,
-				   void __user *buf, size_t *pcount,
-				   loff_t *ppos, void **new_buf,
+				   void **buf, size_t *pcount, loff_t *ppos,
 				   enum bpf_attach_type type);
 
 int __cgroup_bpf_run_filter_setsockopt(struct sock *sock, int *level,
@@ -302,12 +295,12 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *map, void *key,
 })
 
 
-#define BPF_CGROUP_RUN_PROG_SYSCTL(head, table, write, buf, count, pos, nbuf)  \
+#define BPF_CGROUP_RUN_PROG_SYSCTL(head, table, write, buf, count, pos)  \
 ({									       \
 	int __ret = 0;							       \
 	if (cgroup_bpf_enabled)						       \
 		__ret = __cgroup_bpf_run_filter_sysctl(head, table, write,     \
-						       buf, count, pos, nbuf,  \
+						       buf, count, pos,        \
 						       BPF_CGROUP_SYSCTL);     \
 	__ret;								       \
 })
@@ -354,7 +347,6 @@ int cgroup_bpf_prog_query(const union bpf_attr *attr,
 #else
 
 struct bpf_prog;
-struct bpf_link;
 struct cgroup_bpf {};
 static inline int cgroup_bpf_inherit(struct cgroup *cgrp) { return 0; }
 static inline void cgroup_bpf_offline(struct cgroup *cgrp) {}
@@ -378,13 +370,6 @@ static inline int cgroup_bpf_link_attach(const union bpf_attr *attr,
 	return -EINVAL;
 }
 
-static inline int cgroup_bpf_replace(struct bpf_link *link,
-				     struct bpf_prog *old_prog,
-				     struct bpf_prog *new_prog)
-{
-	return -EINVAL;
-}
-
 static inline int cgroup_bpf_prog_query(const union bpf_attr *attr,
 					union bpf_attr __user *uattr)
 {
@@ -429,7 +414,7 @@ static inline int bpf_percpu_cgroup_storage_update(struct bpf_map *map,
 #define BPF_CGROUP_RUN_PROG_UDP6_RECVMSG_LOCK(sk, uaddr) ({ 0; })
 #define BPF_CGROUP_RUN_PROG_SOCK_OPS(sock_ops) ({ 0; })
 #define BPF_CGROUP_RUN_PROG_DEVICE_CGROUP(type,major,minor,access) ({ 0; })
-#define BPF_CGROUP_RUN_PROG_SYSCTL(head,table,write,buf,count,pos,nbuf) ({ 0; })
+#define BPF_CGROUP_RUN_PROG_SYSCTL(head,table,write,buf,count,pos) ({ 0; })
 #define BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN(optlen) ({ 0; })
 #define BPF_CGROUP_RUN_PROG_GETSOCKOPT(sock, level, optname, optval, \
 				       optlen, max_optlen, retval) ({ retval; })
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index fd2b2322412d..c07b1d2f3824 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1026,9 +1026,11 @@ extern const struct file_operations bpf_prog_fops;
 	extern const struct bpf_verifier_ops _name ## _verifier_ops;
 #define BPF_MAP_TYPE(_id, _ops) \
 	extern const struct bpf_map_ops _ops;
+#define BPF_LINK_TYPE(_id, _name)
 #include <linux/bpf_types.h>
 #undef BPF_PROG_TYPE
 #undef BPF_MAP_TYPE
+#undef BPF_LINK_TYPE
 
 extern const struct bpf_prog_ops bpf_offload_prog_ops;
 extern const struct bpf_verifier_ops tc_cls_act_analyzer_ops;
@@ -1085,21 +1087,35 @@ int bpf_prog_new_fd(struct bpf_prog *prog);
 
 struct bpf_link {
 	atomic64_t refcnt;
+	u32 id;
+	enum bpf_link_type type;
 	const struct bpf_link_ops *ops;
 	struct bpf_prog *prog;
 	struct work_struct work;
 };
 
+struct bpf_link_primer {
+	struct bpf_link *link;
+	struct file *file;
+	int fd;
+	u32 id;
+};
+
 struct bpf_link_ops {
 	void (*release)(struct bpf_link *link);
 	void (*dealloc)(struct bpf_link *link);
-
+	int (*update_prog)(struct bpf_link *link, struct bpf_prog *new_prog,
+			   struct bpf_prog *old_prog);
+	void (*show_fdinfo)(const struct bpf_link *link, struct seq_file *seq);
+	int (*fill_link_info)(const struct bpf_link *link,
+			      struct bpf_link_info *info);
 };
 
-void bpf_link_init(struct bpf_link *link, const struct bpf_link_ops *ops,
-		   struct bpf_prog *prog);
-void bpf_link_cleanup(struct bpf_link *link, struct file *link_file,
-		      int link_fd);
+void bpf_link_init(struct bpf_link *link, enum bpf_link_type type,
+		   const struct bpf_link_ops *ops, struct bpf_prog *prog);
+int bpf_link_prime(struct bpf_link *link, struct bpf_link_primer *primer);
+int bpf_link_settle(struct bpf_link_primer *primer);
+void bpf_link_cleanup(struct bpf_link_primer *primer);
 void bpf_link_inc(struct bpf_link *link);
 void bpf_link_put(struct bpf_link *link);
 int bpf_link_new_fd(struct bpf_link *link);
@@ -1215,6 +1231,7 @@ int btf_check_type_match(struct bpf_verifier_env *env, struct bpf_prog *prog,
 
 struct bpf_prog *bpf_prog_by_id(u32 id);
 
+const struct bpf_func_proto *bpf_base_func_proto(enum bpf_func_id func_id);
 #else /* !CONFIG_BPF_SYSCALL */
 static inline struct bpf_prog *bpf_prog_get(u32 ufd)
 {
@@ -1365,6 +1382,12 @@ static inline struct bpf_prog *bpf_prog_by_id(u32 id)
 {
 	return ERR_PTR(-ENOTSUPP);
 }
+
+static inline const struct bpf_func_proto *
+bpf_base_func_proto(enum bpf_func_id func_id)
+{
+	return NULL;
+}
 #endif /* CONFIG_BPF_SYSCALL */
 
 static inline struct bpf_prog *bpf_prog_get_type(u32 ufd,
@@ -1502,6 +1525,7 @@ extern const struct bpf_func_proto bpf_get_smp_processor_id_proto;
 extern const struct bpf_func_proto bpf_get_numa_node_id_proto;
 extern const struct bpf_func_proto bpf_tail_call_proto;
 extern const struct bpf_func_proto bpf_ktime_get_ns_proto;
+extern const struct bpf_func_proto bpf_ktime_get_boot_ns_proto;
 extern const struct bpf_func_proto bpf_get_current_pid_tgid_proto;
 extern const struct bpf_func_proto bpf_get_current_uid_gid_proto;
 extern const struct bpf_func_proto bpf_get_current_comm_proto;
@@ -1523,6 +1547,7 @@ extern const struct bpf_func_proto bpf_strtoul_proto;
 extern const struct bpf_func_proto bpf_tcp_sock_proto;
 extern const struct bpf_func_proto bpf_jiffies64_proto;
 extern const struct bpf_func_proto bpf_get_ns_current_pid_tgid_proto;
+extern const struct bpf_func_proto bpf_event_output_data_proto;
 
 const struct bpf_func_proto *bpf_tracing_func_proto(
 	enum bpf_func_id func_id, const struct bpf_prog *prog);
@@ -1530,6 +1555,7 @@ const struct bpf_func_proto *bpf_tracing_func_proto(
 /* Shared helpers among cBPF and eBPF. */
 void bpf_user_rnd_init_once(void);
 u64 bpf_user_rnd_u32(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5);
+u64 bpf_get_raw_cpu_id(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5);
 
 #if defined(CONFIG_NET)
 bool bpf_sock_common_is_valid_access(int off, int size,
diff --git a/include/linux/bpf_types.h b/include/linux/bpf_types.h
index ba0c2d56f8a3..8345cdf553b8 100644
--- a/include/linux/bpf_types.h
+++ b/include/linux/bpf_types.h
@@ -118,3 +118,9 @@ BPF_MAP_TYPE(BPF_MAP_TYPE_STACK, stack_map_ops)
 #if defined(CONFIG_BPF_JIT)
 BPF_MAP_TYPE(BPF_MAP_TYPE_STRUCT_OPS, bpf_struct_ops_map_ops)
 #endif
+
+BPF_LINK_TYPE(BPF_LINK_TYPE_RAW_TRACEPOINT, raw_tracepoint)
+BPF_LINK_TYPE(BPF_LINK_TYPE_TRACING, tracing)
+#ifdef CONFIG_CGROUP_BPF
+BPF_LINK_TYPE(BPF_LINK_TYPE_CGROUP, cgroup)
+#endif
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 6462c5447872..8be150e69c7c 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -15,6 +15,7 @@
 #define PHY_ID_BCMAC131			0x0143bc70
 #define PHY_ID_BCM5481			0x0143bca0
 #define PHY_ID_BCM5395			0x0143bcf0
+#define PHY_ID_BCM53125			0x03625f20
 #define PHY_ID_BCM54810			0x03625d00
 #define PHY_ID_BCM5482			0x0143bcb0
 #define PHY_ID_BCM5411			0x00206070
@@ -24,6 +25,7 @@
 #define PHY_ID_BCM5461			0x002060c0
 #define PHY_ID_BCM54612E		0x03625e60
 #define PHY_ID_BCM54616S		0x03625d10
+#define PHY_ID_BCM54140			0xae025019
 #define PHY_ID_BCM57780			0x03625d90
 #define PHY_ID_BCM89610			0x03625cd0
 
@@ -114,6 +116,9 @@
 #define MII_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
 #define MII_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
 
+#define MII_BCM54XX_RDB_ADDR	0x1e
+#define MII_BCM54XX_RDB_DATA	0x1f
+
 /*
  * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
  */
diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h
index a954def26c0d..900b9f4e0605 100644
--- a/include/linux/can/skb.h
+++ b/include/linux/can/skb.h
@@ -34,7 +34,7 @@
 struct can_skb_priv {
 	int ifindex;
 	int skbcnt;
-	struct can_frame cf[0];
+	struct can_frame cf[];
 };
 
 static inline struct can_skb_priv *can_skb_prv(struct sk_buff *skb)
diff --git a/include/linux/capability.h b/include/linux/capability.h
index ecce0f43c73a..027d7e4a853b 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -251,6 +251,10 @@ extern bool privileged_wrt_inode_uidgid(struct user_namespace *ns, const struct
 extern bool capable_wrt_inode_uidgid(const struct inode *inode, int cap);
 extern bool file_ns_capable(const struct file *file, struct user_namespace *ns, int cap);
 extern bool ptracer_capable(struct task_struct *tsk, struct user_namespace *ns);
+static inline bool perfmon_capable(void)
+{
+	return capable(CAP_PERFMON) || capable(CAP_SYS_ADMIN);
+}
 
 /* audit system wants to get cap info from files as well */
 extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
index 60de3fedd3a7..405657a9a0d5 100644
--- a/include/linux/cb710.h
+++ b/include/linux/cb710.h
@@ -36,7 +36,7 @@ struct cb710_chip {
 	unsigned		slot_mask;
 	unsigned		slots;
 	spinlock_t		irq_lock;
-	struct cb710_slot	slot[0];
+	struct cb710_slot	slot[];
 };
 
 /* NOTE: cb710_chip.slots is modified only during device init/exit and
diff --git a/include/linux/ceph/mon_client.h b/include/linux/ceph/mon_client.h
index dbb8a6959a73..ce4ffeb384d7 100644
--- a/include/linux/ceph/mon_client.h
+++ b/include/linux/ceph/mon_client.h
@@ -19,7 +19,7 @@ struct ceph_monmap {
 	struct ceph_fsid fsid;
 	u32 epoch;
 	u32 num_mon;
-	struct ceph_entity_inst mon_inst[0];
+	struct ceph_entity_inst mon_inst[];
 };
 
 struct ceph_mon_client;
diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h
index 2b1b35240074..3f01d43f0598 100644
--- a/include/linux/clk/tegra.h
+++ b/include/linux/clk/tegra.h
@@ -131,6 +131,9 @@ extern void tegra210_set_sata_pll_seq_sw(bool state);
 extern void tegra210_put_utmipll_in_iddq(void);
 extern void tegra210_put_utmipll_out_iddq(void);
 extern int tegra210_clk_handle_mbist_war(unsigned int id);
+extern void tegra210_clk_emc_dll_enable(bool flag);
+extern void tegra210_clk_emc_dll_update_setting(u32 emc_dll_src_value);
+extern void tegra210_clk_emc_update_setting(u32 emc_src_value);
 
 struct clk;
 
@@ -143,4 +146,28 @@ void tegra20_clk_set_emc_round_callback(tegra20_clk_emc_round_cb *round_cb,
 					void *cb_arg);
 int tegra20_clk_prepare_emc_mc_same_freq(struct clk *emc_clk, bool same);
 
+struct tegra210_clk_emc_config {
+	unsigned long rate;
+	bool same_freq;
+	u32 value;
+
+	unsigned long parent_rate;
+	u8 parent;
+};
+
+struct tegra210_clk_emc_provider {
+	struct module *owner;
+	struct device *dev;
+
+	struct tegra210_clk_emc_config *configs;
+	unsigned int num_configs;
+
+	int (*set_rate)(struct device *dev,
+			const struct tegra210_clk_emc_config *config);
+};
+
+int tegra210_clk_emc_attach(struct clk *clk,
+			    struct tegra210_clk_emc_provider *provider);
+void tegra210_clk_emc_detach(struct clk *clk);
+
 #endif /* __LINUX_CLK_TEGRA_H_ */
diff --git a/include/linux/compaction.h b/include/linux/compaction.h
index 4b898cdbdf05..6fa0eea3f530 100644
--- a/include/linux/compaction.h
+++ b/include/linux/compaction.h
@@ -86,7 +86,7 @@ static inline unsigned long compact_gap(unsigned int order)
 #ifdef CONFIG_COMPACTION
 extern int sysctl_compact_memory;
 extern int sysctl_compaction_handler(struct ctl_table *table, int write,
-			void __user *buffer, size_t *length, loff_t *ppos);
+			void *buffer, size_t *length, loff_t *ppos);
 extern int sysctl_extfrag_threshold;
 extern int sysctl_compact_unevictable_allowed;
 
@@ -97,7 +97,7 @@ extern enum compact_result try_to_compact_pages(gfp_t gfp_mask,
 		struct page **page);
 extern void reset_isolation_suitable(pg_data_t *pgdat);
 extern enum compact_result compaction_suitable(struct zone *zone, int order,
-		unsigned int alloc_flags, int classzone_idx);
+		unsigned int alloc_flags, int highest_zoneidx);
 
 extern void defer_compaction(struct zone *zone, int order);
 extern bool compaction_deferred(struct zone *zone, int order);
@@ -182,7 +182,7 @@ bool compaction_zonelist_suitable(struct alloc_context *ac, int order,
 
 extern int kcompactd_run(int nid);
 extern void kcompactd_stop(int nid);
-extern void wakeup_kcompactd(pg_data_t *pgdat, int order, int classzone_idx);
+extern void wakeup_kcompactd(pg_data_t *pgdat, int order, int highest_zoneidx);
 
 #else
 static inline void reset_isolation_suitable(pg_data_t *pgdat)
@@ -190,7 +190,7 @@ static inline void reset_isolation_suitable(pg_data_t *pgdat)
 }
 
 static inline enum compact_result compaction_suitable(struct zone *zone, int order,
-					int alloc_flags, int classzone_idx)
+					int alloc_flags, int highest_zoneidx)
 {
 	return COMPACT_SKIPPED;
 }
@@ -232,7 +232,8 @@ static inline void kcompactd_stop(int nid)
 {
 }
 
-static inline void wakeup_kcompactd(pg_data_t *pgdat, int order, int classzone_idx)
+static inline void wakeup_kcompactd(pg_data_t *pgdat,
+				int order, int highest_zoneidx)
 {
 }
 
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 0480ba4db592..19c524513cbb 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -820,6 +820,10 @@ asmlinkage long compat_sys_pwritev64v2(unsigned long fd,
 		unsigned long vlen, loff_t pos, rwf_t flags);
 #endif
 
+asmlinkage ssize_t compat_sys_process_madvise(compat_int_t which,
+		compat_pid_t upid, const struct compat_iovec __user *vec,
+		compat_ulong_t vlen, compat_int_t behavior,
+		compat_ulong_t flags);
 
 /*
  * Deprecated system calls which are still defined in
diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h
index 333a6695a918..2cb42d8bdedc 100644
--- a/include/linux/compiler-clang.h
+++ b/include/linux/compiler-clang.h
@@ -16,7 +16,7 @@
 #define KASAN_ABI_VERSION 5
 
 #if __has_feature(address_sanitizer) || __has_feature(hwaddress_sanitizer)
-/* emulate gcc's __SANITIZE_ADDRESS__ flag */
+/* Emulate GCC's __SANITIZE_ADDRESS__ flag */
 #define __SANITIZE_ADDRESS__
 #define __no_sanitize_address \
 		__attribute__((no_sanitize("address", "hwaddress")))
@@ -24,6 +24,15 @@
 #define __no_sanitize_address
 #endif
 
+#if __has_feature(thread_sanitizer)
+/* emulate gcc's __SANITIZE_THREAD__ flag */
+#define __SANITIZE_THREAD__
+#define __no_sanitize_thread \
+		__attribute__((no_sanitize("thread")))
+#else
+#define __no_sanitize_thread
+#endif
+
 /*
  * Not all versions of clang implement the the type-generic versions
  * of the builtin overflow checkers. Fortunately, clang implements
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index d7ee4c6bad48..cf294faec2f8 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -145,6 +145,12 @@
 #define __no_sanitize_address
 #endif
 
+#if defined(__SANITIZE_THREAD__) && __has_attribute(__no_sanitize_thread__)
+#define __no_sanitize_thread __attribute__((no_sanitize_thread))
+#else
+#define __no_sanitize_thread
+#endif
+
 #if GCC_VERSION >= 50100
 #define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
 #endif
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 034b0a644efc..7ce2dd6e8319 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -178,6 +178,7 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
 #endif
 
 #include <uapi/linux/types.h>
+#include <linux/kcsan-checks.h>
 
 #define __READ_ONCE_SIZE						\
 ({									\
@@ -193,12 +194,6 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
 	}								\
 })
 
-static __always_inline
-void __read_once_size(const volatile void *p, void *res, int size)
-{
-	__READ_ONCE_SIZE;
-}
-
 #ifdef CONFIG_KASAN
 /*
  * We can't declare function 'inline' because __no_sanitize_address confilcts
@@ -207,18 +202,47 @@ void __read_once_size(const volatile void *p, void *res, int size)
  * '__maybe_unused' allows us to avoid defined-but-not-used warnings.
  */
 # define __no_kasan_or_inline __no_sanitize_address notrace __maybe_unused
+# define __no_sanitize_or_inline __no_kasan_or_inline
 #else
 # define __no_kasan_or_inline __always_inline
 #endif
 
-static __no_kasan_or_inline
+#define __no_kcsan __no_sanitize_thread
+#ifdef __SANITIZE_THREAD__
+/*
+ * Rely on __SANITIZE_THREAD__ instead of CONFIG_KCSAN, to avoid not inlining in
+ * compilation units where instrumentation is disabled. The attribute 'noinline'
+ * is required for older compilers, where implicit inlining of very small
+ * functions renders __no_sanitize_thread ineffective.
+ */
+# define __no_kcsan_or_inline __no_kcsan noinline notrace __maybe_unused
+# define __no_sanitize_or_inline __no_kcsan_or_inline
+#else
+# define __no_kcsan_or_inline __always_inline
+#endif
+
+#ifndef __no_sanitize_or_inline
+#define __no_sanitize_or_inline __always_inline
+#endif
+
+static __no_kcsan_or_inline
+void __read_once_size(const volatile void *p, void *res, int size)
+{
+	kcsan_check_atomic_read(p, size);
+	__READ_ONCE_SIZE;
+}
+
+static __no_sanitize_or_inline
 void __read_once_size_nocheck(const volatile void *p, void *res, int size)
 {
 	__READ_ONCE_SIZE;
 }
 
-static __always_inline void __write_once_size(volatile void *p, void *res, int size)
+static __no_kcsan_or_inline
+void __write_once_size(volatile void *p, void *res, int size)
 {
+	kcsan_check_atomic_write(p, size);
+
 	switch (size) {
 	case 1: *(volatile __u8 *)p = *(__u8 *)res; break;
 	case 2: *(volatile __u16 *)p = *(__u16 *)res; break;
@@ -289,6 +313,26 @@ unsigned long read_word_at_a_time(const void *addr)
 	__u.__val;					\
 })
 
+/**
+ * data_race - mark an expression as containing intentional data races
+ *
+ * This data_race() macro is useful for situations in which data races
+ * should be forgiven.  One example is diagnostic code that accesses
+ * shared variables but is not a part of the core synchronization design.
+ *
+ * This macro *does not* affect normal code generation, but is a hint
+ * to tooling that data races here are to be ignored.
+ */
+#define data_race(expr)                                                        \
+	({                                                                     \
+		typeof(({ expr; })) __val;                                     \
+		kcsan_disable_current();                                       \
+		__val = ({ expr; });                                           \
+		kcsan_enable_current();                                        \
+		__val;                                                         \
+	})
+#else
+
 #endif /* __KERNEL__ */
 
 /*
@@ -356,4 +400,10 @@ static inline void *offset_to_ptr(const int *off)
 /* &a[0] degrades to a pointer: a different type from an array */
 #define __must_be_array(a)	BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
 
+/*
+ * This is needed in functions which generate the stack canary, see
+ * arch/x86/kernel/smpboot.c::start_secondary() for an example.
+ */
+#define prevent_tail_call_optimization()	asm("")
+
 #endif /* __LINUX_COMPILER_H */
diff --git a/include/linux/console.h b/include/linux/console.h
index 7a140f4e5d0c..75dd20650fbe 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -134,7 +134,7 @@ static inline int con_debug_leave(void)
  */
 
 #define CON_PRINTBUFFER	(1)
-#define CON_CONSDEV	(2) /* Last on the command line */
+#define CON_CONSDEV	(2) /* Preferred console, /dev/console */
 #define CON_ENABLED	(4)
 #define CON_BOOT	(8)
 #define CON_ANYTIME	(16) /* Safe to call when cpu is offline */
diff --git a/include/linux/coredump.h b/include/linux/coredump.h
index abf4b4e65dbb..7a899e83835d 100644
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -22,4 +22,8 @@ extern void do_coredump(const kernel_siginfo_t *siginfo);
 static inline void do_coredump(const kernel_siginfo_t *siginfo) {}
 #endif
 
+extern int core_uses_pid;
+extern char core_pattern[];
+extern unsigned int core_pipe_limit;
+
 #endif /* _LINUX_COREDUMP_H */
diff --git a/include/linux/coresight.h b/include/linux/coresight.h
index 193cc9dbf448..e3e9f0e3a878 100644
--- a/include/linux/coresight.h
+++ b/include/linux/coresight.h
@@ -100,10 +100,12 @@ union coresight_dev_subtype {
 };
 
 /**
- * struct coresight_platform_data - data harvested from the DT specification
- * @nr_inport:	number of input ports for this component.
- * @nr_outport:	number of output ports for this component.
- * @conns:	Array of nr_outport connections from this component
+ * struct coresight_platform_data - data harvested from the firmware
+ * specification.
+ *
+ * @nr_inport:	Number of elements for the input connections.
+ * @nr_outport:	Number of elements for the output connections.
+ * @conns:	Sparse array of nr_outport connections from this component.
  */
 struct coresight_platform_data {
 	int nr_inport;
@@ -140,12 +142,28 @@ struct coresight_desc {
  * @chid_fwnode: remote component's fwnode handle.
  * @child_dev:	a @coresight_device representation of the component
 		connected to @outport.
+ * @link: Representation of the connection as a sysfs link.
  */
 struct coresight_connection {
 	int outport;
 	int child_port;
 	struct fwnode_handle *child_fwnode;
 	struct coresight_device *child_dev;
+	struct coresight_sysfs_link *link;
+};
+
+/**
+ * struct coresight_sysfs_link - representation of a connection in sysfs.
+ * @orig:		Originating (master) coresight device for the link.
+ * @orig_name:		Name to use for the link orig->target.
+ * @target:		Target (slave) coresight device for the link.
+ * @target_name:	Name to use for the link target->orig.
+ */
+struct coresight_sysfs_link {
+	struct coresight_device *orig;
+	const char *orig_name;
+	struct coresight_device *target;
+	const char *target_name;
 };
 
 /**
@@ -165,6 +183,9 @@ struct coresight_connection {
  * @ea:		Device attribute for sink representation under PMU directory.
  * @ect_dev:	Associated cross trigger device. Not part of the trace data
  *		path or connections.
+ * @nr_links:   number of sysfs links created to other components from this
+ *		device. These will appear in the "connections" group.
+ * @has_conns_grp: Have added a "connections" group for sysfs links.
  */
 struct coresight_device {
 	struct coresight_platform_data *pdata;
@@ -180,6 +201,9 @@ struct coresight_device {
 	struct dev_ext_attribute *ea;
 	/* cross trigger handling */
 	struct coresight_device *ect_dev;
+	/* sysfs links between components */
+	int nr_links;
+	bool has_conns_grp;
 };
 
 /*
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 4664fc1871de..bc156285d097 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -97,8 +97,6 @@ extern void unregister_oldmem_pfn_is_ram(void);
 static inline bool is_kdump_kernel(void) { return 0; }
 #endif /* CONFIG_CRASH_DUMP */
 
-extern unsigned long saved_max_pfn;
-
 /* Device Dump information to be filled by drivers */
 struct vmcoredd_data {
 	char dump_name[VMCOREDD_MAX_NAME_BYTES]; /* Unique name of the dump */
diff --git a/include/linux/crush/crush.h b/include/linux/crush/crush.h
index 54741295c70b..38b0e4d50ed9 100644
--- a/include/linux/crush/crush.h
+++ b/include/linux/crush/crush.h
@@ -87,7 +87,7 @@ struct crush_rule_mask {
 struct crush_rule {
 	__u32 len;
 	struct crush_rule_mask mask;
-	struct crush_rule_step steps[0];
+	struct crush_rule_step steps[];
 };
 
 #define crush_rule_size(len) (sizeof(struct crush_rule) + \
diff --git a/include/linux/dev_printk.h b/include/linux/dev_printk.h
index 5aad06b4ca7b..3028b644b4fb 100644
--- a/include/linux/dev_printk.h
+++ b/include/linux/dev_printk.h
@@ -109,7 +109,8 @@ void _dev_info(const struct device *dev, const char *fmt, ...)
 #define dev_info(dev, fmt, ...)						\
 	_dev_info(dev, dev_fmt(fmt), ##__VA_ARGS__)
 
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 #define dev_dbg(dev, fmt, ...)						\
 	dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__)
 #elif defined(DEBUG)
@@ -181,7 +182,8 @@ do {									\
 	dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
 #define dev_info_ratelimited(dev, fmt, ...)				\
 	dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 /* descriptor check is first to prevent flooding with "callbacks suppressed" */
 #define dev_dbg_ratelimited(dev, fmt, ...)				\
 do {									\
diff --git a/include/linux/device_cgroup.h b/include/linux/device_cgroup.h
index fa35b52e0002..9a72214496e5 100644
--- a/include/linux/device_cgroup.h
+++ b/include/linux/device_cgroup.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/fs.h>
-#include <linux/bpf-cgroup.h>
 
 #define DEVCG_ACC_MKNOD 1
 #define DEVCG_ACC_READ  2
@@ -11,16 +10,10 @@
 #define DEVCG_DEV_CHAR  2
 #define DEVCG_DEV_ALL   4  /* this represents all devices */
 
-#ifdef CONFIG_CGROUP_DEVICE
-int devcgroup_check_permission(short type, u32 major, u32 minor,
-			       short access);
-#else
-static inline int devcgroup_check_permission(short type, u32 major, u32 minor,
-					     short access)
-{ return 0; }
-#endif
 
 #if defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF)
+int devcgroup_check_permission(short type, u32 major, u32 minor,
+			       short access);
 static inline int devcgroup_inode_permission(struct inode *inode, int mask)
 {
 	short type, access = 0;
@@ -61,6 +54,9 @@ static inline int devcgroup_inode_mknod(int mode, dev_t dev)
 }
 
 #else
+static inline int devcgroup_check_permission(short type, u32 major, u32 minor,
+			       short access)
+{ return 0; }
 static inline int devcgroup_inode_permission(struct inode *inode, int mask)
 { return 0; }
 static inline int devcgroup_inode_mknod(int mode, dev_t dev)
diff --git a/include/linux/dm-bufio.h b/include/linux/dm-bufio.h
index 3c8b7d274bd9..07e1f163e299 100644
--- a/include/linux/dm-bufio.h
+++ b/include/linux/dm-bufio.h
@@ -118,6 +118,18 @@ int dm_bufio_write_dirty_buffers(struct dm_bufio_client *c);
  */
 int dm_bufio_issue_flush(struct dm_bufio_client *c);
 
+/*
+ * Send a discard request to the underlying device.
+ */
+int dm_bufio_issue_discard(struct dm_bufio_client *c, sector_t block, sector_t count);
+
+/*
+ * Free the specified range of buffers. If a buffer is held by other process, it
+ * is not freed. If a buffer is dirty, it is discarded without writeback.
+ * Finally, send the discard request to the device.
+ */
+int dm_bufio_discard_buffers(struct dm_bufio_client *c, sector_t block, sector_t count);
+
 /*
  * Like dm_bufio_release but also move the buffer to the new
  * block. dm_bufio_write_dirty_buffers is needed to commit the new block.
diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
index 1ade486fc2bb..82e0a4a64601 100644
--- a/include/linux/dma-buf.h
+++ b/include/linux/dma-buf.h
@@ -334,6 +334,14 @@ struct dma_buf {
  * Attachment operations implemented by the importer.
  */
 struct dma_buf_attach_ops {
+	/**
+	 * @allow_peer2peer:
+	 *
+	 * If this is set to true the importer must be able to handle peer
+	 * resources without struct pages.
+	 */
+	bool allow_peer2peer;
+
 	/**
 	 * @move_notify
 	 *
@@ -362,6 +370,7 @@ struct dma_buf_attach_ops {
  * @node: list of dma_buf_attachment, protected by dma_resv lock of the dmabuf.
  * @sgt: cached mapping.
  * @dir: direction of cached mapping.
+ * @peer2peer: true if the importer can handle peer resources without pages.
  * @priv: exporter specific attachment data.
  * @importer_ops: importer operations for this attachment, if provided
  * dma_buf_map/unmap_attachment() must be called with the dma_resv lock held.
@@ -382,6 +391,7 @@ struct dma_buf_attachment {
 	struct list_head node;
 	struct sg_table *sgt;
 	enum dma_data_direction dir;
+	bool peer2peer;
 	const struct dma_buf_attach_ops *importer_ops;
 	void *importer_priv;
 	void *priv;
diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index 24b8684aa21d..136f984df0d9 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -67,6 +67,8 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size,
 }
 
 u64 dma_direct_get_required_mask(struct device *dev);
+gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
+				  u64 *phys_mask);
 void *dma_direct_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs);
 void dma_direct_free(struct device *dev, size_t size, void *cpu_addr,
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 330ad58fbf4d..b43116a6405d 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -630,9 +630,9 @@ void *dma_common_pages_remap(struct page **pages, size_t size,
 			pgprot_t prot, const void *caller);
 void dma_common_free_remap(void *cpu_addr, size_t size);
 
-bool dma_in_atomic_pool(void *start, size_t size);
-void *dma_alloc_from_pool(size_t size, struct page **ret_page, gfp_t flags);
-bool dma_free_from_pool(void *start, size_t size);
+void *dma_alloc_from_pool(struct device *dev, size_t size,
+			  struct page **ret_page, gfp_t flags);
+bool dma_free_from_pool(struct device *dev, void *start, size_t size);
 
 int
 dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, void *cpu_addr,
diff --git a/include/linux/dma/ti-cppi5.h b/include/linux/dma/ti-cppi5.h
index 579356ae447e..78c911269107 100644
--- a/include/linux/dma/ti-cppi5.h
+++ b/include/linux/dma/ti-cppi5.h
@@ -47,7 +47,7 @@ struct cppi5_host_desc_t {
 	u32 buf_info1;
 	u32 org_buf_len;
 	u64 org_buf_ptr;
-	u32 epib[0];
+	u32 epib[];
 } __packed;
 
 #define CPPI5_DESC_MIN_ALIGN			(16U)
@@ -139,7 +139,7 @@ struct cppi5_desc_epib_t {
  */
 struct cppi5_monolithic_desc_t {
 	struct cppi5_desc_hdr_t hdr;
-	u32 epib[0];
+	u32 epib[];
 };
 
 #define CPPI5_INFO2_MDESC_DATA_OFFSET_SHIFT	(18U)
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 21065c04c4ac..6283917edd90 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -83,9 +83,9 @@ enum dma_transfer_direction {
 /**
  * Interleaved Transfer Request
  * ----------------------------
- * A chunk is collection of contiguous bytes to be transfered.
+ * A chunk is collection of contiguous bytes to be transferred.
  * The gap(in bytes) between two chunks is called inter-chunk-gap(ICG).
- * ICGs may or maynot change between chunks.
+ * ICGs may or may not change between chunks.
  * A FRAME is the smallest series of contiguous {chunk,icg} pairs,
  *  that when repeated an integral number of times, specifies the transfer.
  * A transfer template is specification of a Frame, the number of times
@@ -153,7 +153,7 @@ struct dma_interleaved_template {
 	bool dst_sgl;
 	size_t numf;
 	size_t frame_size;
-	struct data_chunk sgl[0];
+	struct data_chunk sgl[];
 };
 
 /**
@@ -341,13 +341,11 @@ struct dma_chan {
  * @chan: driver channel device
  * @device: sysfs device
  * @dev_id: parent dma_device dev_id
- * @idr_ref: reference count to gate release of dma_device dev_id
  */
 struct dma_chan_dev {
 	struct dma_chan *chan;
 	struct device device;
 	int dev_id;
-	atomic_t *idr_ref;
 };
 
 /**
@@ -537,7 +535,7 @@ struct dmaengine_unmap_data {
 	struct device *dev;
 	struct kref kref;
 	size_t len;
-	dma_addr_t addr[0];
+	dma_addr_t addr[];
 };
 
 struct dma_async_tx_descriptor;
@@ -835,6 +833,8 @@ struct dma_device {
 	int dev_id;
 	struct device *dev;
 	struct module *owner;
+	struct ida chan_ida;
+	struct mutex chan_mutex;	/* to protect chan_ida */
 
 	u32 src_addr_widths;
 	u32 dst_addr_widths;
@@ -1069,7 +1069,7 @@ static inline int dmaengine_terminate_all(struct dma_chan *chan)
  * dmaengine_synchronize() needs to be called before it is safe to free
  * any memory that is accessed by previously submitted descriptors or before
  * freeing any resources accessed from within the completion callback of any
- * perviously submitted descriptors.
+ * previously submitted descriptors.
  *
  * This function can be called from atomic context as well as from within a
  * complete callback of a descriptor submitted on the same channel.
@@ -1091,7 +1091,7 @@ static inline int dmaengine_terminate_async(struct dma_chan *chan)
  *
  * Synchronizes to the DMA channel termination to the current context. When this
  * function returns it is guaranteed that all transfers for previously issued
- * descriptors have stopped and and it is safe to free the memory assoicated
+ * descriptors have stopped and it is safe to free the memory associated
  * with them. Furthermore it is guaranteed that all complete callback functions
  * for a previously submitted descriptor have finished running and it is safe to
  * free resources accessed from within the complete callbacks.
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index 4cf02ecd67de..abcd5fde30eb 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -48,7 +48,7 @@ struct _ddebug {
 
 
 
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG_CORE)
 int ddebug_add_module(struct _ddebug *tab, unsigned int n,
 				const char *modname);
 extern int ddebug_remove_module(const char *mod_name);
diff --git a/include/linux/edac.h b/include/linux/edac.h
index 0f20b986b0ab..6eb7d55d7c3d 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -31,14 +31,6 @@ struct device;
 extern int edac_op_state;
 
 struct bus_type *edac_get_sysfs_subsys(void);
-int edac_get_report_status(void);
-void edac_set_report_status(int new);
-
-enum {
-	EDAC_REPORTING_ENABLED,
-	EDAC_REPORTING_DISABLED,
-	EDAC_REPORTING_FORCE
-};
 
 static inline void opstate_init(void)
 {
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 251f1f783cdf..53c6ff888318 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -379,8 +379,8 @@ typedef union {
 
 typedef struct {
 	efi_guid_t guid;
-	const char *name;
 	unsigned long *ptr;
+	const char name[16];
 } efi_config_table_type_t;
 
 #define EFI_SYSTEM_TABLE_SIGNATURE ((u64)0x5453595320494249ULL)
@@ -1234,7 +1234,7 @@ struct linux_efi_memreserve {
 	struct {
 		phys_addr_t	base;
 		phys_addr_t	size;
-	} entry[0];
+	} entry[];
 };
 
 #define EFI_MEMRESERVE_SIZE(count) (sizeof(struct linux_efi_memreserve) + \
diff --git a/include/linux/elf.h b/include/linux/elf.h
index e3649b3e970e..5d5b0321da0b 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -2,6 +2,7 @@
 #ifndef _LINUX_ELF_H
 #define _LINUX_ELF_H
 
+#include <linux/types.h>
 #include <asm/elf.h>
 #include <uapi/linux/elf.h>
 
@@ -21,6 +22,9 @@
 	SET_PERSONALITY(ex)
 #endif
 
+#define ELF32_GNU_PROPERTY_ALIGN	4
+#define ELF64_GNU_PROPERTY_ALIGN	8
+
 #if ELF_CLASS == ELFCLASS32
 
 extern Elf32_Dyn _DYNAMIC [];
@@ -31,6 +35,7 @@ extern Elf32_Dyn _DYNAMIC [];
 #define elf_addr_t	Elf32_Off
 #define Elf_Half	Elf32_Half
 #define Elf_Word	Elf32_Word
+#define ELF_GNU_PROPERTY_ALIGN	ELF32_GNU_PROPERTY_ALIGN
 
 #else
 
@@ -42,6 +47,7 @@ extern Elf64_Dyn _DYNAMIC [];
 #define elf_addr_t	Elf64_Off
 #define Elf_Half	Elf64_Half
 #define Elf_Word	Elf64_Word
+#define ELF_GNU_PROPERTY_ALIGN	ELF64_GNU_PROPERTY_ALIGN
 
 #endif
 
@@ -56,4 +62,41 @@ static inline int elf_coredump_extra_notes_write(struct coredump_params *cprm) {
 extern int elf_coredump_extra_notes_size(void);
 extern int elf_coredump_extra_notes_write(struct coredump_params *cprm);
 #endif
+
+/*
+ * NT_GNU_PROPERTY_TYPE_0 header:
+ * Keep this internal until/unless there is an agreed UAPI definition.
+ * pr_type values (GNU_PROPERTY_*) are public and defined in the UAPI header.
+ */
+struct gnu_property {
+	u32 pr_type;
+	u32 pr_datasz;
+};
+
+struct arch_elf_state;
+
+#ifndef CONFIG_ARCH_USE_GNU_PROPERTY
+static inline int arch_parse_elf_property(u32 type, const void *data,
+					  size_t datasz, bool compat,
+					  struct arch_elf_state *arch)
+{
+	return 0;
+}
+#else
+extern int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
+				   bool compat, struct arch_elf_state *arch);
+#endif
+
+#ifdef CONFIG_ARCH_HAVE_ELF_PROT
+int arch_elf_adjust_prot(int prot, const struct arch_elf_state *state,
+			 bool has_interp, bool is_interp);
+#else
+static inline int arch_elf_adjust_prot(int prot,
+				       const struct arch_elf_state *state,
+				       bool has_interp, bool is_interp)
+{
+	return prot;
+}
+#endif
+
 #endif /* _LINUX_ELF_H */
diff --git a/include/linux/elfnote.h b/include/linux/elfnote.h
index 594d4e78654f..69b136e4dd2b 100644
--- a/include/linux/elfnote.h
+++ b/include/linux/elfnote.h
@@ -54,7 +54,7 @@
 .popsection				;
 
 #define ELFNOTE(name, type, desc)		\
-	ELFNOTE_START(name, type, "")		\
+	ELFNOTE_START(name, type, "a")		\
 		desc			;	\
 	ELFNOTE_END
 
diff --git a/include/linux/file.h b/include/linux/file.h
index 142d102f285e..122f80084a3e 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -94,4 +94,6 @@ extern void fd_install(unsigned int fd, struct file *file);
 extern void flush_delayed_fput(void);
 extern void __fput_sync(struct file *);
 
+extern unsigned int sysctl_nr_open_min, sysctl_nr_open_max;
+
 #endif /* __LINUX_FILE_H */
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 9b5aa5c483cc..af37318bb1c5 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -863,8 +863,6 @@ int bpf_prog_create(struct bpf_prog **pfp, struct sock_fprog_kern *fprog);
 int bpf_prog_create_from_user(struct bpf_prog **pfp, struct sock_fprog *fprog,
 			      bpf_aux_classic_check_t trans, bool save_orig);
 void bpf_prog_destroy(struct bpf_prog *fp);
-const struct bpf_func_proto *
-bpf_base_func_proto(enum bpf_func_id func_id);
 
 int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk);
 int sk_attach_bpf(u32 ufd, struct sock *sk);
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 4bbd0afd91b7..cb3e2c06ed8a 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -12,7 +12,6 @@
 struct firmware {
 	size_t size;
 	const u8 *data;
-	struct page **pages;
 
 	/* firmware loader private fields */
 	void *priv;
diff --git a/include/linux/fpga/adi-axi-common.h b/include/linux/fpga/adi-axi-common.h
index 7fc95d5c95bb..141ac3f251e6 100644
--- a/include/linux/fpga/adi-axi-common.h
+++ b/include/linux/fpga/adi-axi-common.h
@@ -11,9 +11,13 @@
 #ifndef ADI_AXI_COMMON_H_
 #define ADI_AXI_COMMON_H_
 
-#define	ADI_AXI_REG_VERSION			0x0000
+#define ADI_AXI_REG_VERSION			0x0000
 
 #define ADI_AXI_PCORE_VER(major, minor, patch)	\
 	(((major) << 16) | ((minor) << 8) | (patch))
 
+#define ADI_AXI_PCORE_VER_MAJOR(version)	(((version) >> 16) & 0xff)
+#define ADI_AXI_PCORE_VER_MINOR(version)	(((version) >> 8) & 0xff)
+#define ADI_AXI_PCORE_VER_PATCH(version)	((version) & 0xff)
+
 #endif /* ADI_AXI_COMMON_H_ */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 4f6f59b4f22a..b1d1dd8bd9c2 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -292,6 +292,7 @@ enum positive_aop_returns {
 struct page;
 struct address_space;
 struct writeback_control;
+struct readahead_control;
 
 /*
  * Write life time hint values.
@@ -375,6 +376,7 @@ struct address_space_operations {
 	 */
 	int (*readpages)(struct file *filp, struct address_space *mapping,
 			struct list_head *pages, unsigned nr_pages);
+	void (*readahead)(struct readahead_control *);
 
 	int (*write_begin)(struct file *, struct address_space *mapping,
 				loff_t pos, unsigned len, unsigned flags,
@@ -976,6 +978,7 @@ struct file {
 #endif /* #ifdef CONFIG_EPOLL */
 	struct address_space	*f_mapping;
 	errseq_t		f_wb_err;
+	errseq_t		f_sb_err; /* for syncfs */
 } __randomize_layout
   __attribute__((aligned(4)));	/* lest something weird decides that 2 is OK */
 
@@ -983,7 +986,7 @@ struct file_handle {
 	__u32 handle_bytes;
 	int handle_type;
 	/* file identifier */
-	unsigned char f_handle[0];
+	unsigned char f_handle[];
 };
 
 static inline struct file *get_file(struct file *f)
@@ -1409,6 +1412,8 @@ extern int send_sigurg(struct fown_struct *fown);
 #define SB_I_IMA_UNVERIFIABLE_SIGNATURE	0x00000020
 #define SB_I_UNTRUSTED_MOUNTER		0x00000040
 
+#define SB_I_SKIP_SYNC	0x00000100	/* Skip superblock at global sync */
+
 /* Possible states of 'frozen' field */
 enum {
 	SB_UNFROZEN = 0,		/* FS is unfrozen */
@@ -1520,6 +1525,9 @@ struct super_block {
 	/* Being remounted read-only */
 	int s_readonly_remount;
 
+	/* per-sb errseq_t for reporting writeback errors via syncfs */
+	errseq_t s_wb_err;
+
 	/* AIO completions deferred from interrupt context */
 	struct workqueue_struct *s_dio_done_wq;
 	struct hlist_head s_pins;
@@ -2581,7 +2589,6 @@ extern struct kmem_cache *names_cachep;
 #ifdef CONFIG_BLOCK
 extern int register_blkdev(unsigned int, const char *);
 extern void unregister_blkdev(unsigned int, const char *);
-extern void bdev_unhash_inode(dev_t dev);
 extern struct block_device *bdget(dev_t);
 extern struct block_device *bdgrab(struct block_device *bdev);
 extern void bd_set_size(struct block_device *, loff_t size);
@@ -2723,7 +2730,6 @@ extern bool is_bad_inode(struct inode *);
 extern int revalidate_disk(struct gendisk *);
 extern int check_disk_change(struct block_device *);
 extern int __invalidate_device(struct block_device *, bool);
-extern int invalidate_partition(struct gendisk *, int);
 #endif
 unsigned long invalidate_mapping_pages(struct address_space *mapping,
 					pgoff_t start, pgoff_t end);
@@ -2827,6 +2833,18 @@ static inline errseq_t filemap_sample_wb_err(struct address_space *mapping)
 	return errseq_sample(&mapping->wb_err);
 }
 
+/**
+ * file_sample_sb_err - sample the current errseq_t to test for later errors
+ * @mapping: mapping to be sampled
+ *
+ * Grab the most current superblock-level errseq_t value for the given
+ * struct file.
+ */
+static inline errseq_t file_sample_sb_err(struct file *file)
+{
+	return errseq_sample(&file->f_path.dentry->d_sb->s_wb_err);
+}
+
 static inline int filemap_nr_thps(struct address_space *mapping)
 {
 #ifdef CONFIG_READ_ONLY_THP_FOR_FS
@@ -3475,7 +3493,7 @@ static inline ino_t parent_ino(struct dentry *dentry)
  */
 struct simple_transaction_argresp {
 	ssize_t size;
-	char data[0];
+	char data[];
 };
 
 #define SIMPLE_TRANSACTION_LIMIT (PAGE_SIZE - sizeof(struct simple_transaction_argresp))
@@ -3536,11 +3554,11 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf,
 
 struct ctl_table;
 int proc_nr_files(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos);
+		  void *buffer, size_t *lenp, loff_t *ppos);
 int proc_nr_dentry(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos);
+		  void *buffer, size_t *lenp, loff_t *ppos);
 int proc_nr_inodes(struct ctl_table *table, int write,
-		   void __user *buffer, size_t *lenp, loff_t *ppos);
+		   void *buffer, size_t *lenp, loff_t *ppos);
 int __init get_filesystem_list(char *buf);
 
 #define __FMODE_EXEC		((__force int) FMODE_EXEC)
diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h
index d5ba431b5d63..5b6072e4a7ab 100644
--- a/include/linux/fscache-cache.h
+++ b/include/linux/fscache-cache.h
@@ -46,7 +46,7 @@ struct fscache_cache_tag {
 	unsigned long		flags;
 #define FSCACHE_TAG_RESERVED	0		/* T if tag is reserved for a cache */
 	atomic_t		usage;
-	char			name[0];	/* tag name */
+	char			name[];	/* tag name */
 };
 
 /*
diff --git a/include/linux/fsl/bestcomm/bestcomm.h b/include/linux/fsl/bestcomm/bestcomm.h
index a0e2e6b19b57..154e541ce57e 100644
--- a/include/linux/fsl/bestcomm/bestcomm.h
+++ b/include/linux/fsl/bestcomm/bestcomm.h
@@ -27,7 +27,7 @@
  */
 struct bcom_bd {
 	u32	status;
-	u32	data[0];	/* variable payload size */
+	u32	data[];	/* variable payload size */
 };
 
 /* ======================================================================== */
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index db95244a62d4..ddfc377de0d2 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -1005,8 +1005,7 @@ extern void disable_trace_on_warning(void);
 extern int __disable_trace_on_warning;
 
 int tracepoint_printk_sysctl(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp,
-			     loff_t *ppos);
+			     void *buffer, size_t *lenp, loff_t *ppos);
 
 #else /* CONFIG_TRACING */
 static inline void  disable_trace_on_warning(void) { }
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 9b3fffdf4011..058d895544c7 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -339,7 +339,7 @@ extern dev_t blk_lookup_devt(const char *name, int partno);
 
 int bdev_disk_changed(struct block_device *bdev, bool invalidate);
 int blk_add_partitions(struct gendisk *disk, struct block_device *bdev);
-int blk_drop_partitions(struct gendisk *disk, struct block_device *bdev);
+int blk_drop_partitions(struct block_device *bdev);
 extern void printk_all_partitions(void);
 
 extern struct gendisk *__alloc_disk_node(int minors, int node_id);
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 4aba4c86c626..67a0774e080b 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -110,6 +110,11 @@ struct vm_area_struct;
  * the caller guarantees the allocation will allow more memory to be freed
  * very shortly e.g. process exiting or swapping. Users either should
  * be the MM or co-ordinating closely with the VM (e.g. swap over NFS).
+ * Users of this flag have to be extremely careful to not deplete the reserve
+ * completely and implement a throttling mechanism which controls the
+ * consumption of the reserve based on the amount of freed memory.
+ * Usage of a pre-allocated pool (e.g. mempool) should be always considered
+ * before using this flag.
  *
  * %__GFP_NOMEMALLOC is used to explicitly forbid access to emergency reserves.
  * This takes precedence over the %__GFP_MEMALLOC flag if both are set.
@@ -307,7 +312,7 @@ struct vm_area_struct;
 #define GFP_MOVABLE_MASK (__GFP_RECLAIMABLE|__GFP_MOVABLE)
 #define GFP_MOVABLE_SHIFT 3
 
-static inline int gfpflags_to_migratetype(const gfp_t gfp_flags)
+static inline int gfp_migratetype(const gfp_t gfp_flags)
 {
 	VM_WARN_ON((gfp_flags & GFP_MOVABLE_MASK) == GFP_MOVABLE_MASK);
 	BUILD_BUG_ON((1UL << GFP_MOVABLE_SHIFT) != ___GFP_MOVABLE);
diff --git a/include/linux/greybus/greybus_protocols.h b/include/linux/greybus/greybus_protocols.h
index dfbc6c39a74b..aeb8f9243545 100644
--- a/include/linux/greybus/greybus_protocols.h
+++ b/include/linux/greybus/greybus_protocols.h
@@ -345,7 +345,7 @@ struct gb_cap_get_ims_certificate_request {
 
 struct gb_cap_get_ims_certificate_response {
 	__u8			result_code;
-	__u8			certificate[0];
+	__u8			certificate[];
 } __packed;
 
 /* CAP authenticate request/response */
@@ -358,7 +358,7 @@ struct gb_cap_authenticate_request {
 struct gb_cap_authenticate_response {
 	__u8			result_code;
 	__u8			response[64];
-	__u8			signature[0];
+	__u8			signature[];
 } __packed;
 
 
@@ -642,7 +642,7 @@ struct gb_hid_get_report_request {
 struct gb_hid_set_report_request {
 	__u8				report_type;
 	__u8				report_id;
-	__u8				report[0];
+	__u8				report[];
 } __packed;
 
 /* HID input report request, via interrupt pipe */
@@ -680,7 +680,7 @@ struct gb_i2c_transfer_op {
 
 struct gb_i2c_transfer_request {
 	__le16				op_count;
-	struct gb_i2c_transfer_op	ops[0];		/* op_count of these */
+	struct gb_i2c_transfer_op	ops[];		/* op_count of these */
 } __packed;
 struct gb_i2c_transfer_response {
 	__u8				data[0];	/* inbound data */
@@ -908,7 +908,7 @@ struct gb_spi_transfer_request {
 	__u8			chip_select;	/* of the spi device */
 	__u8			mode;		/* of the spi device */
 	__le16			count;
-	struct gb_spi_transfer	transfers[0];	/* count of these */
+	struct gb_spi_transfer	transfers[];	/* count of these */
 } __packed;
 
 struct gb_spi_transfer_response {
@@ -1188,7 +1188,7 @@ struct gb_svc_pwrmon_rail_count_get_response {
 
 struct gb_svc_pwrmon_rail_names_get_response {
 	__u8	status;
-	__u8	name[0][GB_SVC_PWRMON_RAIL_NAME_BUFSIZE];
+	__u8	name[][GB_SVC_PWRMON_RAIL_NAME_BUFSIZE];
 } __packed;
 
 #define GB_SVC_PWRMON_TYPE_CURR			0x01
@@ -1281,7 +1281,7 @@ struct gb_svc_intf_oops_request {
 
 struct gb_raw_send_request {
 	__le32	len;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 
@@ -1300,7 +1300,7 @@ struct gb_raw_send_request {
 /* Represents data from AP -> Module */
 struct gb_uart_send_data_request {
 	__le16	size;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 /* recv-data-request flags */
@@ -1313,7 +1313,7 @@ struct gb_uart_send_data_request {
 struct gb_uart_recv_data_request {
 	__le16	size;
 	__u8	flags;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 struct gb_uart_receive_credits_request {
@@ -1382,14 +1382,14 @@ struct gb_loopback_transfer_request {
 	__le32	len;
 	__le32  reserved0;
 	__le32  reserved1;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 struct gb_loopback_transfer_response {
 	__le32	len;
 	__le32	reserved0;
 	__le32	reserved1;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 /* SDIO */
@@ -1530,13 +1530,13 @@ struct gb_sdio_transfer_request {
 
 	__le16	data_blocks;
 	__le16	data_blksz;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 struct gb_sdio_transfer_response {
 	__le16	data_blocks;
 	__le16	data_blksz;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 /* event request: generated by module and is defined as unidirectional */
@@ -1572,7 +1572,7 @@ struct gb_camera_configure_streams_request {
 	__u8 flags;
 #define GB_CAMERA_CONFIGURE_STREAMS_TEST_ONLY	0x01
 	__le16 padding;
-	struct gb_camera_stream_config_request config[0];
+	struct gb_camera_stream_config_request config[];
 } __packed;
 
 /* Greybus Camera Configure Streams response payload */
@@ -1593,7 +1593,7 @@ struct gb_camera_configure_streams_response {
 	__u8 flags;
 	__u8 padding[2];
 	__le32 data_rate;
-	struct gb_camera_stream_config_response config[0];
+	struct gb_camera_stream_config_response config[];
 };
 
 /* Greybus Camera Capture request payload - response has no payload */
@@ -1602,7 +1602,7 @@ struct gb_camera_capture_request {
 	__u8 streams;
 	__u8 padding;
 	__le16 num_frames;
-	__u8 settings[0];
+	__u8 settings[];
 } __packed;
 
 /* Greybus Camera Flush response payload - request has no payload */
@@ -1616,7 +1616,7 @@ struct gb_camera_metadata_request {
 	__le16 frame_number;
 	__u8 stream;
 	__u8 padding;
-	__u8 metadata[0];
+	__u8 metadata[];
 } __packed;
 
 /* Lights */
@@ -1993,7 +1993,7 @@ struct gb_audio_integer64 {
 struct gb_audio_enumerated {
 	__le32	items;
 	__le16	names_length;
-	__u8	names[0];
+	__u8	names[];
 } __packed;
 
 struct gb_audio_ctl_elem_info { /* See snd_ctl_elem_info in Linux source */
@@ -2033,7 +2033,7 @@ struct gb_audio_widget {
 	__u8	type;		/* GB_AUDIO_WIDGET_TYPE_* */
 	__u8	state;		/* GB_AUDIO_WIDGET_STATE_* */
 	__u8	ncontrols;
-	struct gb_audio_control	ctl[0];	/* 'ncontrols' entries */
+	struct gb_audio_control	ctl[];	/* 'ncontrols' entries */
 } __packed;
 
 struct gb_audio_route {
@@ -2059,7 +2059,7 @@ struct gb_audio_topology {
 	 * struct gb_audio_widget	widgets[num_widgets];
 	 * struct gb_audio_route	routes[num_routes];
 	 */
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 struct gb_audio_get_topology_size_response {
@@ -2157,7 +2157,7 @@ struct gb_audio_streaming_event_request {
 
 struct gb_audio_send_data_request {
 	__le64	timestamp;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 
@@ -2171,7 +2171,7 @@ struct gb_audio_send_data_request {
 
 struct gb_log_send_log_request {
 	__le16	len;
-	__u8    msg[0];
+	__u8    msg[];
 } __packed;
 
 #endif /* __GREYBUS_PROTOCOLS_H */
diff --git a/include/linux/host1x.h b/include/linux/host1x.h
index 62d216ff1097..c230b4e70d75 100644
--- a/include/linux/host1x.h
+++ b/include/linux/host1x.h
@@ -17,9 +17,12 @@ enum host1x_class {
 	HOST1X_CLASS_GR3D = 0x60,
 };
 
+struct host1x;
 struct host1x_client;
 struct iommu_group;
 
+u64 host1x_get_dma_mask(struct host1x *host1x);
+
 /**
  * struct host1x_client_ops - host1x client operations
  * @init: host1x client initialization code
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 43a1cef8f0f1..a8775106a3dc 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -105,14 +105,13 @@ struct hugepage_subpool *hugepage_new_subpool(struct hstate *h, long max_hpages,
 void hugepage_put_subpool(struct hugepage_subpool *spool);
 
 void reset_vma_resv_huge_pages(struct vm_area_struct *vma);
-int hugetlb_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
-int hugetlb_overcommit_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
-int hugetlb_treat_movable_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
-
-#ifdef CONFIG_NUMA
-int hugetlb_mempolicy_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-#endif
+int hugetlb_sysctl_handler(struct ctl_table *, int, void *, size_t *, loff_t *);
+int hugetlb_overcommit_handler(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
+int hugetlb_treat_movable_handler(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
+int hugetlb_mempolicy_sysctl_handler(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
 
 int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
 long follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *,
@@ -519,8 +518,8 @@ int huge_add_to_page_cache(struct page *page, struct address_space *mapping,
 int __init __alloc_bootmem_huge_page(struct hstate *h);
 int __init alloc_bootmem_huge_page(struct hstate *h);
 
-void __init hugetlb_bad_size(void);
 void __init hugetlb_add_hstate(unsigned order);
+bool __init arch_hugetlb_valid_size(unsigned long size);
 struct hstate *size_to_hstate(unsigned long size);
 
 #ifndef HUGE_MAX_HSTATE
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 692c89ccf5df..d783847d8cb4 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -117,7 +117,7 @@ struct hv_ring_buffer {
 	 * Ring data starts here + RingDataStartOffset
 	 * !!! DO NOT place any fields below this !!!
 	 */
-	u8 buffer[0];
+	u8 buffer[];
 } __packed;
 
 struct hv_ring_buffer_info {
@@ -313,7 +313,7 @@ struct vmadd_remove_transfer_page_set {
 struct gpa_range {
 	u32 byte_count;
 	u32 byte_offset;
-	u64 pfn_array[0];
+	u64 pfn_array[];
 };
 
 /*
@@ -425,7 +425,7 @@ enum vmbus_channel_message_type {
 	CHANNELMSG_19				= 19,
 	CHANNELMSG_20				= 20,
 	CHANNELMSG_TL_CONNECT_REQUEST		= 21,
-	CHANNELMSG_22				= 22,
+	CHANNELMSG_MODIFYCHANNEL		= 22,
 	CHANNELMSG_TL_CONNECT_RESULT		= 23,
 	CHANNELMSG_COUNT
 };
@@ -563,7 +563,7 @@ struct vmbus_channel_gpadl_header {
 	u32 gpadl;
 	u16 range_buflen;
 	u16 rangecount;
-	struct gpa_range range[0];
+	struct gpa_range range[];
 } __packed;
 
 /* This is the followup packet that contains more PFNs. */
@@ -571,7 +571,7 @@ struct vmbus_channel_gpadl_body {
 	struct vmbus_channel_message_header header;
 	u32 msgnumber;
 	u32 gpadl;
-	u64 pfn[0];
+	u64 pfn[];
 } __packed;
 
 struct vmbus_channel_gpadl_created {
@@ -620,6 +620,13 @@ struct vmbus_channel_tl_connect_request {
 	guid_t host_service_id;
 } __packed;
 
+/* Modify Channel parameters, cf. vmbus_send_modifychannel() */
+struct vmbus_channel_modifychannel {
+	struct vmbus_channel_message_header header;
+	u32 child_relid;
+	u32 target_vp;
+} __packed;
+
 struct vmbus_channel_version_response {
 	struct vmbus_channel_message_header header;
 	u8 version_supported;
@@ -672,7 +679,7 @@ struct vmbus_channel_msginfo {
 	 * The channel message that goes out on the "wire".
 	 * It will contain at minimum the VMBUS_CHANNEL_MESSAGE_HEADER header
 	 */
-	unsigned char msg[0];
+	unsigned char msg[];
 };
 
 struct vmbus_close_msg {
@@ -689,11 +696,6 @@ union hv_connection_id {
 	} u;
 };
 
-enum hv_numa_policy {
-	HV_BALANCED = 0,
-	HV_LOCALIZED,
-};
-
 enum vmbus_device_type {
 	HV_IDE = 0,
 	HV_SCSI,
@@ -771,6 +773,15 @@ struct vmbus_channel {
 	void (*onchannel_callback)(void *context);
 	void *channel_callback_context;
 
+	void (*change_target_cpu_callback)(struct vmbus_channel *channel,
+			u32 old, u32 new);
+
+	/*
+	 * Synchronize channel scheduling and channel removal; see the inline
+	 * comments in vmbus_chan_sched() and vmbus_reset_channel_cb().
+	 */
+	spinlock_t sched_lock;
+
 	/*
 	 * A channel can be marked for one of three modes of reading:
 	 *   BATCHED - callback called from taslket and should read
@@ -802,10 +813,6 @@ struct vmbus_channel {
 	u32 target_vp;
 	/* The corresponding CPUID in the guest */
 	u32 target_cpu;
-	/*
-	 * State to manage the CPU affiliation of channels.
-	 */
-	struct cpumask alloced_cpus_in_node;
 	int numa_node;
 	/*
 	 * Support for sub-channels. For high performance devices,
@@ -854,11 +861,6 @@ struct vmbus_channel {
 	 * Support per-channel state for use by vmbus drivers.
 	 */
 	void *per_channel_state;
-	/*
-	 * To support per-cpu lookup mapping of relid to channel,
-	 * link up channels based on their CPU affinity.
-	 */
-	struct list_head percpu_list;
 
 	/*
 	 * Defer freeing channel until after all cpu's have
@@ -897,18 +899,6 @@ struct vmbus_channel {
 	 */
 	bool low_latency;
 
-	/*
-	 * NUMA distribution policy:
-	 * We support two policies:
-	 * 1) Balanced: Here all performance critical channels are
-	 *    distributed evenly amongst all the NUMA nodes.
-	 *    This policy will be the default policy.
-	 * 2) Localized: All channels of a given instance of a
-	 *    performance critical service will be assigned CPUs
-	 *    within a selected NUMA node.
-	 */
-	enum hv_numa_policy affinity_policy;
-
 	bool probe_done;
 
 	/*
@@ -964,12 +954,6 @@ static inline bool is_sub_channel(const struct vmbus_channel *c)
 	return c->offermsg.offer.sub_channel_index != 0;
 }
 
-static inline void set_channel_affinity_state(struct vmbus_channel *c,
-					      enum hv_numa_policy policy)
-{
-	c->affinity_policy = policy;
-}
-
 static inline void set_channel_read_mode(struct vmbus_channel *c,
 					enum hv_callback_mode mode)
 {
@@ -1017,7 +1001,7 @@ static inline void clear_low_latency_mode(struct vmbus_channel *c)
 	c->low_latency = false;
 }
 
-void vmbus_onmessage(void *context);
+void vmbus_onmessage(struct vmbus_channel_message_header *hdr);
 
 int vmbus_request_offers(void);
 
@@ -1531,6 +1515,7 @@ extern __u32 vmbus_proto_version;
 
 int vmbus_send_tl_connect_request(const guid_t *shv_guest_servie_id,
 				  const guid_t *shv_host_servie_id);
+int vmbus_send_modifychannel(u32 child_relid, u32 target_vp);
 void vmbus_set_event(struct vmbus_channel *channel);
 
 /* Get the start of the ring buffer. */
diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
index c5a977320f82..98ef73b7c8fd 100644
--- a/include/linux/i2c-mux.h
+++ b/include/linux/i2c-mux.h
@@ -29,7 +29,7 @@ struct i2c_mux_core {
 
 	int num_adapters;
 	int max_adapters;
-	struct i2c_adapter *adapter[0];
+	struct i2c_adapter *adapter[];
 };
 
 struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 16268ef1cbcc..c912cc2a8fee 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -9,7 +9,7 @@
  * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
  * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH
  * Copyright (c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright (c) 2018 - 2019 Intel Corporation
+ * Copyright (c) 2018 - 2020 Intel Corporation
  */
 
 #ifndef LINUX_IEEE80211_H
@@ -716,7 +716,7 @@ struct ieee80211_msrment_ie {
 	u8 token;
 	u8 mode;
 	u8 type;
-	u8 request[0];
+	u8 request[];
 } __packed;
 
 /**
@@ -859,6 +859,7 @@ enum ieee80211_ht_chanwidth_values {
  * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width
  * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width
  * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width
+ * @IEEE80211_OPMODE_NOTIF_BW_160_80P80: 160 / 80+80 MHz indicator flag
  * @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask
  *	(the NSS value is the value of this field + 1)
  * @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift
@@ -866,11 +867,12 @@ enum ieee80211_ht_chanwidth_values {
  *	using a beamforming steering matrix
  */
 enum ieee80211_vht_opmode_bits {
-	IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK	= 3,
+	IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK	= 0x03,
 	IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ	= 0,
 	IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ	= 1,
 	IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ	= 2,
 	IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ	= 3,
+	IEEE80211_OPMODE_NOTIF_BW_160_80P80	= 0x04,
 	IEEE80211_OPMODE_NOTIF_RX_NSS_MASK	= 0x70,
 	IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT	= 4,
 	IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF	= 0x80,
@@ -1065,6 +1067,7 @@ struct ieee80211_mgmt {
 /* Supported rates membership selectors */
 #define BSS_MEMBERSHIP_SELECTOR_HT_PHY	127
 #define BSS_MEMBERSHIP_SELECTOR_VHT_PHY	126
+#define BSS_MEMBERSHIP_SELECTOR_HE_PHY	122
 
 /* mgmt header + 1 byte category code */
 #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
@@ -1641,7 +1644,7 @@ struct ieee80211_he_operation {
 	__le32 he_oper_params;
 	__le16 he_mcs_nss_set;
 	/* Optional 0,1,3,4,5,7 or 8 bytes: depends on @he_oper_params */
-	u8 optional[0];
+	u8 optional[];
 } __packed;
 
 /**
@@ -1653,7 +1656,7 @@ struct ieee80211_he_operation {
 struct ieee80211_he_spr {
 	u8 he_sr_control;
 	/* Optional 0 to 19 bytes: depends on @he_sr_control */
-	u8 optional[0];
+	u8 optional[];
 } __packed;
 
 /**
@@ -1731,6 +1734,9 @@ struct ieee80211_mu_edca_param_set {
  * @ext_nss_bw_capable: indicates whether or not the local transmitter
  *	(rate scaling algorithm) can deal with the new logic
  *	(dot11VHTExtendedNSSBWCapable)
+ * @max_vht_nss: current maximum NSS as advertised by the STA in
+ *	operating mode notification, can be 0 in which case the
+ *	capability data will be used to derive this (from MCS support)
  *
  * Due to the VHT Extended NSS Bandwidth Support, the maximum NSS can
  * vary for a given BW/MCS. This function parses the data.
@@ -1739,7 +1745,8 @@ struct ieee80211_mu_edca_param_set {
  */
 int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
 			      enum ieee80211_vht_chanwidth bw,
-			      int mcs, bool ext_nss_bw_capable);
+			      int mcs, bool ext_nss_bw_capable,
+			      unsigned int max_vht_nss);
 
 /* 802.11ax HE MAC capabilities */
 #define IEEE80211_HE_MAC_CAP0_HTC_HE				0x01
@@ -3323,6 +3330,16 @@ static inline int ieee80211_get_tdls_action(struct sk_buff *skb, u32 hdr_size)
 #define TU_TO_JIFFIES(x)	(usecs_to_jiffies((x) * 1024))
 #define TU_TO_EXP_TIME(x)	(jiffies + TU_TO_JIFFIES(x))
 
+/* convert frequencies */
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+
+/* convert powers */
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
+
 /**
  * ieee80211_action_contains_tpc - checks if the frame contains TPC element
  * @skb: the skb containing the frame, length will be checked
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index 9e57c4411734..b3a8d3054af0 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -47,6 +47,8 @@ struct br_ip_list {
 #define BR_BCAST_FLOOD		BIT(14)
 #define BR_NEIGH_SUPPRESS	BIT(15)
 #define BR_ISOLATED		BIT(16)
+#define BR_MRP_AWARE		BIT(17)
+#define BR_MRP_LOST_CONT	BIT(18)
 
 #define BR_DEFAULT_AGEING_TIME	(300 * HZ)
 
diff --git a/include/linux/if_team.h b/include/linux/if_team.h
index ec7e4bd07f82..c9bdccd67ffb 100644
--- a/include/linux/if_team.h
+++ b/include/linux/if_team.h
@@ -67,7 +67,7 @@ struct team_port {
 	u16 queue_id;
 	struct list_head qom_list; /* node in queue override mapping list */
 	struct rcu_head	rcu;
-	long mode_priv[0];
+	long mode_priv[];
 };
 
 static inline struct team_port *team_port_get_rcu(const struct net_device *dev)
diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h
index 5a127c0ed200..a3a838dcf8e4 100644
--- a/include/linux/iio/adc/ad_sigma_delta.h
+++ b/include/linux/iio/adc/ad_sigma_delta.h
@@ -133,62 +133,4 @@ void ad_sd_cleanup_buffer_and_trigger(struct iio_dev *indio_dev);
 
 int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig);
 
-#define __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
-	_storagebits, _shift, _extend_name, _type, _mask_all) \
-	{ \
-		.type = (_type), \
-		.differential = (_channel2 == -1 ? 0 : 1), \
-		.indexed = 1, \
-		.channel = (_channel1), \
-		.channel2 = (_channel2), \
-		.address = (_address), \
-		.extend_name = (_extend_name), \
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
-			BIT(IIO_CHAN_INFO_OFFSET), \
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
-		.info_mask_shared_by_all = _mask_all, \
-		.scan_index = (_si), \
-		.scan_type = { \
-			.sign = 'u', \
-			.realbits = (_bits), \
-			.storagebits = (_storagebits), \
-			.shift = (_shift), \
-			.endianness = IIO_BE, \
-		}, \
-	}
-
-#define AD_SD_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
-	_storagebits, _shift) \
-	__AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
-		_storagebits, _shift, NULL, IIO_VOLTAGE, \
-		BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
-#define AD_SD_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
-	_storagebits, _shift) \
-	__AD_SD_CHANNEL(_si, _channel, _channel, _address, _bits, \
-		_storagebits, _shift, "shorted", IIO_VOLTAGE, \
-		BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
-#define AD_SD_CHANNEL(_si, _channel, _address, _bits, \
-	_storagebits, _shift) \
-	__AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
-		_storagebits, _shift, NULL, IIO_VOLTAGE, \
-		 BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
-#define AD_SD_CHANNEL_NO_SAMP_FREQ(_si, _channel, _address, _bits, \
-	_storagebits, _shift) \
-	__AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
-		_storagebits, _shift, NULL, IIO_VOLTAGE, 0)
-
-#define AD_SD_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \
-	__AD_SD_CHANNEL(_si, 0, -1, _address, _bits, \
-		_storagebits, _shift, NULL, IIO_TEMP, \
-		BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
-#define AD_SD_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \
-	_shift) \
-	__AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
-		_storagebits, _shift, "supply", IIO_VOLTAGE, \
-		BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
 #endif
diff --git a/include/linux/iio/adc/adi-axi-adc.h b/include/linux/iio/adc/adi-axi-adc.h
new file mode 100644
index 000000000000..c5d48e1c2d36
--- /dev/null
+++ b/include/linux/iio/adc/adi-axi-adc.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Analog Devices Generic AXI ADC IP core driver/library
+ * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+#ifndef __ADI_AXI_ADC_H__
+#define __ADI_AXI_ADC_H__
+
+struct device;
+struct iio_chan_spec;
+
+/**
+ * struct adi_axi_adc_chip_info - Chip specific information
+ * @name		Chip name
+ * @id			Chip ID (usually product ID)
+ * @channels		Channel specifications of type @struct axi_adc_chan_spec
+ * @num_channels	Number of @channels
+ * @scale_table		Supported scales by the chip; tuples of 2 ints
+ * @num_scales		Number of scales in the table
+ * @max_rate		Maximum sampling rate supported by the device
+ */
+struct adi_axi_adc_chip_info {
+	const char			*name;
+	unsigned int			id;
+
+	const struct iio_chan_spec	*channels;
+	unsigned int			num_channels;
+
+	const unsigned int		(*scale_table)[2];
+	int				num_scales;
+
+	unsigned long			max_rate;
+};
+
+/**
+ * struct adi_axi_adc_conv - data of the ADC attached to the AXI ADC
+ * @chip_info		chip info details for the client ADC
+ * @preenable_setup	op to run in the client before enabling the AXI ADC
+ * @reg_access		IIO debugfs_reg_access hook for the client ADC
+ * @read_raw		IIO read_raw hook for the client ADC
+ * @write_raw		IIO write_raw hook for the client ADC
+ */
+struct adi_axi_adc_conv {
+	const struct adi_axi_adc_chip_info		*chip_info;
+
+	int (*preenable_setup)(struct adi_axi_adc_conv *conv);
+	int (*reg_access)(struct adi_axi_adc_conv *conv, unsigned int reg,
+			  unsigned int writeval, unsigned int *readval);
+	int (*read_raw)(struct adi_axi_adc_conv *conv,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask);
+	int (*write_raw)(struct adi_axi_adc_conv *conv,
+			 struct iio_chan_spec const *chan,
+			 int val, int val2, long mask);
+};
+
+struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev,
+							size_t sizeof_priv);
+
+void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv);
+
+#endif
diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h
index 016d8a068353..ff15c61bf319 100644
--- a/include/linux/iio/buffer-dma.h
+++ b/include/linux/iio/buffer-dma.h
@@ -11,7 +11,7 @@
 #include <linux/kref.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
-#include <linux/iio/buffer.h>
+#include <linux/iio/buffer_impl.h>
 
 struct iio_dma_buffer_queue;
 struct iio_dma_buffer_ops;
diff --git a/include/linux/iio/buffer-dmaengine.h b/include/linux/iio/buffer-dmaengine.h
index b3a57444a886..0e503db71289 100644
--- a/include/linux/iio/buffer-dmaengine.h
+++ b/include/linux/iio/buffer-dmaengine.h
@@ -14,4 +14,7 @@ struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev,
 	const char *channel);
 void iio_dmaengine_buffer_free(struct iio_buffer *buffer);
 
+struct iio_buffer *devm_iio_dmaengine_buffer_alloc(struct device *dev,
+						   const char *channel);
+
 #endif
diff --git a/include/linux/iio/buffer_impl.h b/include/linux/iio/buffer_impl.h
index a4d2d8061ef6..a63dc07b7350 100644
--- a/include/linux/iio/buffer_impl.h
+++ b/include/linux/iio/buffer_impl.h
@@ -94,12 +94,6 @@ struct iio_buffer {
 	unsigned int watermark;
 
 	/* private: */
-	/*
-	 * @scan_el_attrs: Control of scan elements if that scan mode
-	 * control method is used.
-	 */
-	struct attribute_group *scan_el_attrs;
-
 	/* @scan_timestamp: Does the scan mode include a timestamp. */
 	bool scan_timestamp;
 
@@ -115,9 +109,6 @@ struct iio_buffer {
 	 */
 	struct attribute_group scan_el_group;
 
-	/* @stufftoread: Flag to indicate new data. */
-	bool stufftoread;
-
 	/* @attrs: Standard attributes of the buffer. */
 	const struct attribute **attrs;
 
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 2bde8c912d4d..c4118dcb8e05 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -63,15 +63,6 @@ void iio_channel_release(struct iio_channel *chan);
  */
 struct iio_channel *devm_iio_channel_get(struct device *dev,
 					 const char *consumer_channel);
-/**
- * devm_iio_channel_release() - Resource managed version of
- *				iio_channel_release().
- * @dev:		Pointer to consumer device for which resource
- *			is allocared.
- * @chan:		The channel to be released.
- */
-void devm_iio_channel_release(struct device *dev, struct iio_channel *chan);
-
 /**
  * iio_channel_get_all() - get all channels associated with a client
  * @dev:		Pointer to consumer device.
@@ -106,15 +97,6 @@ void iio_channel_release_all(struct iio_channel *chan);
  */
 struct iio_channel *devm_iio_channel_get_all(struct device *dev);
 
-/**
- * devm_iio_channel_release_all() - Resource managed version of
- *				    iio_channel_release_all().
- * @dev:		Pointer to consumer device for which resource
- *			is allocared.
- * @chan:		Array channel to be released.
- */
-void devm_iio_channel_release_all(struct device *dev, struct iio_channel *chan);
-
 struct iio_cb_buffer;
 /**
  * iio_channel_get_all_cb() - register callback for triggered capture
diff --git a/include/linux/iio/hw-consumer.h b/include/linux/iio/hw-consumer.h
index 44d48bb1d39f..e8255c2e33bc 100644
--- a/include/linux/iio/hw-consumer.h
+++ b/include/linux/iio/hw-consumer.h
@@ -14,7 +14,6 @@ struct iio_hw_consumer;
 struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev);
 void iio_hw_consumer_free(struct iio_hw_consumer *hwc);
 struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev);
-void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc);
 int iio_hw_consumer_enable(struct iio_hw_consumer *hwc);
 void iio_hw_consumer_disable(struct iio_hw_consumer *hwc);
 
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 25c87507a1fa..a1be82e74c93 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -492,7 +492,7 @@ struct iio_buffer_setup_ops {
  * @buffer:		[DRIVER] any buffer present
  * @buffer_list:	[INTERN] list of all buffers currently attached
  * @scan_bytes:		[INTERN] num bytes captured to be fed to buffer demux
- * @mlock:		[DRIVER] lock used to prevent simultaneous device state
+ * @mlock:		[INTERN] lock used to prevent simultaneous device state
  *			changes
  * @available_scan_masks: [DRIVER] optional array of allowed bitmasks
  * @masklength:		[INTERN] the length of the mask established from
@@ -593,9 +593,6 @@ void iio_device_unregister(struct iio_dev *indio_dev);
  * calls iio_device_register() internally. Refer to that function for more
  * information.
  *
- * If an iio_dev registered with this function needs to be unregistered
- * separately, devm_iio_device_unregister() must be used.
- *
  * RETURNS:
  * 0 on success, negative error number on failure.
  */
@@ -603,7 +600,6 @@ void iio_device_unregister(struct iio_dev *indio_dev);
 	__devm_iio_device_register((dev), (indio_dev), THIS_MODULE)
 int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
 			       struct module *this_mod);
-void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev);
 int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp);
 int iio_device_claim_direct_mode(struct iio_dev *indio_dev);
 void iio_device_release_direct_mode(struct iio_dev *indio_dev);
@@ -694,13 +690,9 @@ static inline struct iio_dev *iio_priv_to_dev(void *priv)
 }
 
 void iio_device_free(struct iio_dev *indio_dev);
-int devm_iio_device_match(struct device *dev, void *res, void *data);
 struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv);
-void devm_iio_device_free(struct device *dev, struct iio_dev *indio_dev);
 struct iio_trigger *devm_iio_trigger_alloc(struct device *dev,
 						const char *fmt, ...);
-void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig);
-
 /**
  * iio_buffer_enabled() - helper function to test if the buffer is enabled
  * @indio_dev:		IIO device structure for device
diff --git a/include/linux/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h
index 764659e01b68..1fc1efa7799d 100644
--- a/include/linux/iio/kfifo_buf.h
+++ b/include/linux/iio/kfifo_buf.h
@@ -9,6 +9,5 @@ struct iio_buffer *iio_kfifo_allocate(void);
 void iio_kfifo_free(struct iio_buffer *r);
 
 struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev);
-void devm_iio_kfifo_free(struct device *dev, struct iio_buffer *r);
 
 #endif
diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h
index 84995e2967ac..cad8325903f9 100644
--- a/include/linux/iio/trigger.h
+++ b/include/linux/iio/trigger.h
@@ -141,9 +141,6 @@ int __devm_iio_trigger_register(struct device *dev,
  **/
 void iio_trigger_unregister(struct iio_trigger *trig_info);
 
-void devm_iio_trigger_unregister(struct device *dev,
-				 struct iio_trigger *trig_info);
-
 /**
  * iio_trigger_set_immutable() - set an immutable trigger on destination
  *
diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h
index 238ad30ce166..e99c91799359 100644
--- a/include/linux/iio/triggered_buffer.h
+++ b/include/linux/iio/triggered_buffer.h
@@ -18,7 +18,5 @@ int devm_iio_triggered_buffer_setup(struct device *dev,
 				    irqreturn_t (*h)(int irq, void *p),
 				    irqreturn_t (*thread)(int irq, void *p),
 				    const struct iio_buffer_setup_ops *ops);
-void devm_iio_triggered_buffer_cleanup(struct device *dev,
-				       struct iio_dev *indio_dev);
 
 #endif
diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h
deleted file mode 100644
index 3614a13a8297..000000000000
--- a/include/linux/input/gp2ap002a00f.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _GP2AP002A00F_H_
-#define _GP2AP002A00F_H_
-
-#include <linux/i2c.h>
-
-#define GP2A_I2C_NAME "gp2ap002a00f"
-
-/**
- * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data
- * @vout_gpio: The gpio connected to the object detected pin (VOUT)
- * @wakeup: Set to true if the proximity can wake the device from suspend
- * @hw_setup: Callback for setting up hardware such as gpios and vregs
- * @hw_shutdown: Callback for properly shutting down hardware
- */
-struct gp2a_platform_data {
-	int vout_gpio;
-	bool wakeup;
-	int (*hw_setup)(struct i2c_client *client);
-	int (*hw_shutdown)(struct i2c_client *client);
-};
-
-#endif
diff --git a/include/linux/instrumented.h b/include/linux/instrumented.h
new file mode 100644
index 000000000000..43e6ea591975
--- /dev/null
+++ b/include/linux/instrumented.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * This header provides generic wrappers for memory access instrumentation that
+ * the compiler cannot emit for: KASAN, KCSAN.
+ */
+#ifndef _LINUX_INSTRUMENTED_H
+#define _LINUX_INSTRUMENTED_H
+
+#include <linux/compiler.h>
+#include <linux/kasan-checks.h>
+#include <linux/kcsan-checks.h>
+#include <linux/types.h>
+
+/**
+ * instrument_read - instrument regular read access
+ *
+ * Instrument a regular read access. The instrumentation should be inserted
+ * before the actual read happens.
+ *
+ * @ptr address of access
+ * @size size of access
+ */
+static __always_inline void instrument_read(const volatile void *v, size_t size)
+{
+	kasan_check_read(v, size);
+	kcsan_check_read(v, size);
+}
+
+/**
+ * instrument_write - instrument regular write access
+ *
+ * Instrument a regular write access. The instrumentation should be inserted
+ * before the actual write happens.
+ *
+ * @ptr address of access
+ * @size size of access
+ */
+static __always_inline void instrument_write(const volatile void *v, size_t size)
+{
+	kasan_check_write(v, size);
+	kcsan_check_write(v, size);
+}
+
+/**
+ * instrument_atomic_read - instrument atomic read access
+ *
+ * Instrument an atomic read access. The instrumentation should be inserted
+ * before the actual read happens.
+ *
+ * @ptr address of access
+ * @size size of access
+ */
+static __always_inline void instrument_atomic_read(const volatile void *v, size_t size)
+{
+	kasan_check_read(v, size);
+	kcsan_check_atomic_read(v, size);
+}
+
+/**
+ * instrument_atomic_write - instrument atomic write access
+ *
+ * Instrument an atomic write access. The instrumentation should be inserted
+ * before the actual write happens.
+ *
+ * @ptr address of access
+ * @size size of access
+ */
+static __always_inline void instrument_atomic_write(const volatile void *v, size_t size)
+{
+	kasan_check_write(v, size);
+	kcsan_check_atomic_write(v, size);
+}
+
+/**
+ * instrument_copy_to_user - instrument reads of copy_to_user
+ *
+ * Instrument reads from kernel memory, that are due to copy_to_user (and
+ * variants). The instrumentation must be inserted before the accesses.
+ *
+ * @to destination address
+ * @from source address
+ * @n number of bytes to copy
+ */
+static __always_inline void
+instrument_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	kasan_check_read(from, n);
+	kcsan_check_read(from, n);
+}
+
+/**
+ * instrument_copy_from_user - instrument writes of copy_from_user
+ *
+ * Instrument writes to kernel memory, that are due to copy_from_user (and
+ * variants). The instrumentation should be inserted before the accesses.
+ *
+ * @to destination address
+ * @from source address
+ * @n number of bytes to copy
+ */
+static __always_inline void
+instrument_copy_from_user(const void *to, const void __user *from, unsigned long n)
+{
+	kasan_check_write(to, n);
+	kcsan_check_write(to, n);
+}
+
+#endif /* _LINUX_INSTRUMENTED_H */
diff --git a/include/linux/iomap.h b/include/linux/iomap.h
index 8b09463dae0d..bc20bd04c2a2 100644
--- a/include/linux/iomap.h
+++ b/include/linux/iomap.h
@@ -155,8 +155,7 @@ loff_t iomap_apply(struct inode *inode, loff_t pos, loff_t length,
 ssize_t iomap_file_buffered_write(struct kiocb *iocb, struct iov_iter *from,
 		const struct iomap_ops *ops);
 int iomap_readpage(struct page *page, const struct iomap_ops *ops);
-int iomap_readpages(struct address_space *mapping, struct list_head *pages,
-		unsigned nr_pages, const struct iomap_ops *ops);
+void iomap_readahead(struct readahead_control *, const struct iomap_ops *ops);
 int iomap_set_page_dirty(struct page *page);
 int iomap_is_partially_uptodate(struct page *page, unsigned long from,
 		unsigned long count);
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index c309f43bde45..d3c0e5b86ee4 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -3,13 +3,13 @@
 #define __IPC_NAMESPACE_H__
 
 #include <linux/err.h>
-#include <linux/idr.h>
-#include <linux/rwsem.h>
 #include <linux/notifier.h>
 #include <linux/nsproxy.h>
 #include <linux/ns_common.h>
 #include <linux/refcount.h>
 #include <linux/rhashtable-types.h>
+#include <linux/rwsem.h>
+#include <linux/xarray.h>
 
 struct user_namespace;
 
@@ -17,11 +17,11 @@ struct ipc_ids {
 	int in_use;
 	unsigned short seq;
 	struct rw_semaphore rwsem;
-	struct idr ipcs_idr;
+	struct xarray ipcs;
 	int max_idx;
-	int last_idx;	/* For wrap around detection */
+	int next_idx;
 #ifdef CONFIG_CHECKPOINT_RESTORE
-	int next_id;
+	int restore_id;
 #endif
 	struct rhashtable key_ht;
 };
@@ -68,6 +68,8 @@ struct ipc_namespace {
 	struct user_namespace *user_ns;
 	struct ucounts *ucounts;
 
+	struct llist_node mnt_llist;
+
 	struct ns_common ns;
 } __randomize_layout;
 
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 657a83b943f0..98338dc6b5d2 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -165,9 +165,9 @@ static inline int kallsyms_show_value(void)
 
 #endif /*CONFIG_KALLSYMS*/
 
-static inline void print_ip_sym(unsigned long ip)
+static inline void print_ip_sym(const char *loglvl, unsigned long ip)
 {
-	printk("[<%px>] %pS\n", (void *) ip, (void *) ip);
+	printk("%s[<%px>] %pS\n", loglvl, (void *) ip, (void *) ip);
 }
 
 #endif /*_LINUX_KALLSYMS_H*/
diff --git a/include/linux/kcsan-checks.h b/include/linux/kcsan-checks.h
new file mode 100644
index 000000000000..7b0b9c44f5f3
--- /dev/null
+++ b/include/linux/kcsan-checks.h
@@ -0,0 +1,430 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _LINUX_KCSAN_CHECKS_H
+#define _LINUX_KCSAN_CHECKS_H
+
+/* Note: Only include what is already included by compiler.h. */
+#include <linux/compiler_attributes.h>
+#include <linux/types.h>
+
+/*
+ * ACCESS TYPE MODIFIERS
+ *
+ *   <none>: normal read access;
+ *   WRITE : write access;
+ *   ATOMIC: access is atomic;
+ *   ASSERT: access is not a regular access, but an assertion;
+ *   SCOPED: access is a scoped access;
+ */
+#define KCSAN_ACCESS_WRITE  0x1
+#define KCSAN_ACCESS_ATOMIC 0x2
+#define KCSAN_ACCESS_ASSERT 0x4
+#define KCSAN_ACCESS_SCOPED 0x8
+
+/*
+ * __kcsan_*: Always calls into the runtime when KCSAN is enabled. This may be used
+ * even in compilation units that selectively disable KCSAN, but must use KCSAN
+ * to validate access to an address. Never use these in header files!
+ */
+#ifdef CONFIG_KCSAN
+/**
+ * __kcsan_check_access - check generic access for races
+ *
+ * @ptr: address of access
+ * @size: size of access
+ * @type: access type modifier
+ */
+void __kcsan_check_access(const volatile void *ptr, size_t size, int type);
+
+/**
+ * kcsan_disable_current - disable KCSAN for the current context
+ *
+ * Supports nesting.
+ */
+void kcsan_disable_current(void);
+
+/**
+ * kcsan_enable_current - re-enable KCSAN for the current context
+ *
+ * Supports nesting.
+ */
+void kcsan_enable_current(void);
+void kcsan_enable_current_nowarn(void); /* Safe in uaccess regions. */
+
+/**
+ * kcsan_nestable_atomic_begin - begin nestable atomic region
+ *
+ * Accesses within the atomic region may appear to race with other accesses but
+ * should be considered atomic.
+ */
+void kcsan_nestable_atomic_begin(void);
+
+/**
+ * kcsan_nestable_atomic_end - end nestable atomic region
+ */
+void kcsan_nestable_atomic_end(void);
+
+/**
+ * kcsan_flat_atomic_begin - begin flat atomic region
+ *
+ * Accesses within the atomic region may appear to race with other accesses but
+ * should be considered atomic.
+ */
+void kcsan_flat_atomic_begin(void);
+
+/**
+ * kcsan_flat_atomic_end - end flat atomic region
+ */
+void kcsan_flat_atomic_end(void);
+
+/**
+ * kcsan_atomic_next - consider following accesses as atomic
+ *
+ * Force treating the next n memory accesses for the current context as atomic
+ * operations.
+ *
+ * @n: number of following memory accesses to treat as atomic.
+ */
+void kcsan_atomic_next(int n);
+
+/**
+ * kcsan_set_access_mask - set access mask
+ *
+ * Set the access mask for all accesses for the current context if non-zero.
+ * Only value changes to bits set in the mask will be reported.
+ *
+ * @mask: bitmask
+ */
+void kcsan_set_access_mask(unsigned long mask);
+
+/* Scoped access information. */
+struct kcsan_scoped_access {
+	struct list_head list;
+	const volatile void *ptr;
+	size_t size;
+	int type;
+};
+/*
+ * Automatically call kcsan_end_scoped_access() when kcsan_scoped_access goes
+ * out of scope; relies on attribute "cleanup", which is supported by all
+ * compilers that support KCSAN.
+ */
+#define __kcsan_cleanup_scoped                                                 \
+	__maybe_unused __attribute__((__cleanup__(kcsan_end_scoped_access)))
+
+/**
+ * kcsan_begin_scoped_access - begin scoped access
+ *
+ * Begin scoped access and initialize @sa, which will cause KCSAN to
+ * continuously check the memory range in the current thread until
+ * kcsan_end_scoped_access() is called for @sa.
+ *
+ * Scoped accesses are implemented by appending @sa to an internal list for the
+ * current execution context, and then checked on every call into the KCSAN
+ * runtime.
+ *
+ * @ptr: address of access
+ * @size: size of access
+ * @type: access type modifier
+ * @sa: struct kcsan_scoped_access to use for the scope of the access
+ */
+struct kcsan_scoped_access *
+kcsan_begin_scoped_access(const volatile void *ptr, size_t size, int type,
+			  struct kcsan_scoped_access *sa);
+
+/**
+ * kcsan_end_scoped_access - end scoped access
+ *
+ * End a scoped access, which will stop KCSAN checking the memory range.
+ * Requires that kcsan_begin_scoped_access() was previously called once for @sa.
+ *
+ * @sa: a previously initialized struct kcsan_scoped_access
+ */
+void kcsan_end_scoped_access(struct kcsan_scoped_access *sa);
+
+
+#else /* CONFIG_KCSAN */
+
+static inline void __kcsan_check_access(const volatile void *ptr, size_t size,
+					int type) { }
+
+static inline void kcsan_disable_current(void)		{ }
+static inline void kcsan_enable_current(void)		{ }
+static inline void kcsan_enable_current_nowarn(void)	{ }
+static inline void kcsan_nestable_atomic_begin(void)	{ }
+static inline void kcsan_nestable_atomic_end(void)	{ }
+static inline void kcsan_flat_atomic_begin(void)	{ }
+static inline void kcsan_flat_atomic_end(void)		{ }
+static inline void kcsan_atomic_next(int n)		{ }
+static inline void kcsan_set_access_mask(unsigned long mask) { }
+
+struct kcsan_scoped_access { };
+#define __kcsan_cleanup_scoped __maybe_unused
+static inline struct kcsan_scoped_access *
+kcsan_begin_scoped_access(const volatile void *ptr, size_t size, int type,
+			  struct kcsan_scoped_access *sa) { return sa; }
+static inline void kcsan_end_scoped_access(struct kcsan_scoped_access *sa) { }
+
+#endif /* CONFIG_KCSAN */
+
+#ifdef __SANITIZE_THREAD__
+/*
+ * Only calls into the runtime when the particular compilation unit has KCSAN
+ * instrumentation enabled. May be used in header files.
+ */
+#define kcsan_check_access __kcsan_check_access
+
+/*
+ * Only use these to disable KCSAN for accesses in the current compilation unit;
+ * calls into libraries may still perform KCSAN checks.
+ */
+#define __kcsan_disable_current kcsan_disable_current
+#define __kcsan_enable_current kcsan_enable_current_nowarn
+#else
+static inline void kcsan_check_access(const volatile void *ptr, size_t size,
+				      int type) { }
+static inline void __kcsan_enable_current(void)  { }
+static inline void __kcsan_disable_current(void) { }
+#endif
+
+/**
+ * __kcsan_check_read - check regular read access for races
+ *
+ * @ptr: address of access
+ * @size: size of access
+ */
+#define __kcsan_check_read(ptr, size) __kcsan_check_access(ptr, size, 0)
+
+/**
+ * __kcsan_check_write - check regular write access for races
+ *
+ * @ptr: address of access
+ * @size: size of access
+ */
+#define __kcsan_check_write(ptr, size)                                         \
+	__kcsan_check_access(ptr, size, KCSAN_ACCESS_WRITE)
+
+/**
+ * kcsan_check_read - check regular read access for races
+ *
+ * @ptr: address of access
+ * @size: size of access
+ */
+#define kcsan_check_read(ptr, size) kcsan_check_access(ptr, size, 0)
+
+/**
+ * kcsan_check_write - check regular write access for races
+ *
+ * @ptr: address of access
+ * @size: size of access
+ */
+#define kcsan_check_write(ptr, size)                                           \
+	kcsan_check_access(ptr, size, KCSAN_ACCESS_WRITE)
+
+/*
+ * Check for atomic accesses: if atomic accesses are not ignored, this simply
+ * aliases to kcsan_check_access(), otherwise becomes a no-op.
+ */
+#ifdef CONFIG_KCSAN_IGNORE_ATOMICS
+#define kcsan_check_atomic_read(...)	do { } while (0)
+#define kcsan_check_atomic_write(...)	do { } while (0)
+#else
+#define kcsan_check_atomic_read(ptr, size)                                     \
+	kcsan_check_access(ptr, size, KCSAN_ACCESS_ATOMIC)
+#define kcsan_check_atomic_write(ptr, size)                                    \
+	kcsan_check_access(ptr, size, KCSAN_ACCESS_ATOMIC | KCSAN_ACCESS_WRITE)
+#endif
+
+/**
+ * ASSERT_EXCLUSIVE_WRITER - assert no concurrent writes to @var
+ *
+ * Assert that there are no concurrent writes to @var; other readers are
+ * allowed. This assertion can be used to specify properties of concurrent code,
+ * where violation cannot be detected as a normal data race.
+ *
+ * For example, if we only have a single writer, but multiple concurrent
+ * readers, to avoid data races, all these accesses must be marked; even
+ * concurrent marked writes racing with the single writer are bugs.
+ * Unfortunately, due to being marked, they are no longer data races. For cases
+ * like these, we can use the macro as follows:
+ *
+ * .. code-block:: c
+ *
+ *	void writer(void) {
+ *		spin_lock(&update_foo_lock);
+ *		ASSERT_EXCLUSIVE_WRITER(shared_foo);
+ *		WRITE_ONCE(shared_foo, ...);
+ *		spin_unlock(&update_foo_lock);
+ *	}
+ *	void reader(void) {
+ *		// update_foo_lock does not need to be held!
+ *		... = READ_ONCE(shared_foo);
+ *	}
+ *
+ * Note: ASSERT_EXCLUSIVE_WRITER_SCOPED(), if applicable, performs more thorough
+ * checking if a clear scope where no concurrent writes are expected exists.
+ *
+ * @var: variable to assert on
+ */
+#define ASSERT_EXCLUSIVE_WRITER(var)                                           \
+	__kcsan_check_access(&(var), sizeof(var), KCSAN_ACCESS_ASSERT)
+
+/*
+ * Helper macros for implementation of for ASSERT_EXCLUSIVE_*_SCOPED(). @id is
+ * expected to be unique for the scope in which instances of kcsan_scoped_access
+ * are declared.
+ */
+#define __kcsan_scoped_name(c, suffix) __kcsan_scoped_##c##suffix
+#define __ASSERT_EXCLUSIVE_SCOPED(var, type, id)                               \
+	struct kcsan_scoped_access __kcsan_scoped_name(id, _)                  \
+		__kcsan_cleanup_scoped;                                        \
+	struct kcsan_scoped_access *__kcsan_scoped_name(id, _dummy_p)          \
+		__maybe_unused = kcsan_begin_scoped_access(                    \
+			&(var), sizeof(var), KCSAN_ACCESS_SCOPED | (type),     \
+			&__kcsan_scoped_name(id, _))
+
+/**
+ * ASSERT_EXCLUSIVE_WRITER_SCOPED - assert no concurrent writes to @var in scope
+ *
+ * Scoped variant of ASSERT_EXCLUSIVE_WRITER().
+ *
+ * Assert that there are no concurrent writes to @var for the duration of the
+ * scope in which it is introduced. This provides a better way to fully cover
+ * the enclosing scope, compared to multiple ASSERT_EXCLUSIVE_WRITER(), and
+ * increases the likelihood for KCSAN to detect racing accesses.
+ *
+ * For example, it allows finding race-condition bugs that only occur due to
+ * state changes within the scope itself:
+ *
+ * .. code-block:: c
+ *
+ *	void writer(void) {
+ *		spin_lock(&update_foo_lock);
+ *		{
+ *			ASSERT_EXCLUSIVE_WRITER_SCOPED(shared_foo);
+ *			WRITE_ONCE(shared_foo, 42);
+ *			...
+ *			// shared_foo should still be 42 here!
+ *		}
+ *		spin_unlock(&update_foo_lock);
+ *	}
+ *	void buggy(void) {
+ *		if (READ_ONCE(shared_foo) == 42)
+ *			WRITE_ONCE(shared_foo, 1); // bug!
+ *	}
+ *
+ * @var: variable to assert on
+ */
+#define ASSERT_EXCLUSIVE_WRITER_SCOPED(var)                                    \
+	__ASSERT_EXCLUSIVE_SCOPED(var, KCSAN_ACCESS_ASSERT, __COUNTER__)
+
+/**
+ * ASSERT_EXCLUSIVE_ACCESS - assert no concurrent accesses to @var
+ *
+ * Assert that there are no concurrent accesses to @var (no readers nor
+ * writers). This assertion can be used to specify properties of concurrent
+ * code, where violation cannot be detected as a normal data race.
+ *
+ * For example, where exclusive access is expected after determining no other
+ * users of an object are left, but the object is not actually freed. We can
+ * check that this property actually holds as follows:
+ *
+ * .. code-block:: c
+ *
+ *	if (refcount_dec_and_test(&obj->refcnt)) {
+ *		ASSERT_EXCLUSIVE_ACCESS(*obj);
+ *		do_some_cleanup(obj);
+ *		release_for_reuse(obj);
+ *	}
+ *
+ * Note: ASSERT_EXCLUSIVE_ACCESS_SCOPED(), if applicable, performs more thorough
+ * checking if a clear scope where no concurrent accesses are expected exists.
+ *
+ * Note: For cases where the object is freed, `KASAN <kasan.html>`_ is a better
+ * fit to detect use-after-free bugs.
+ *
+ * @var: variable to assert on
+ */
+#define ASSERT_EXCLUSIVE_ACCESS(var)                                           \
+	__kcsan_check_access(&(var), sizeof(var), KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ASSERT)
+
+/**
+ * ASSERT_EXCLUSIVE_ACCESS_SCOPED - assert no concurrent accesses to @var in scope
+ *
+ * Scoped variant of ASSERT_EXCLUSIVE_ACCESS().
+ *
+ * Assert that there are no concurrent accesses to @var (no readers nor writers)
+ * for the entire duration of the scope in which it is introduced. This provides
+ * a better way to fully cover the enclosing scope, compared to multiple
+ * ASSERT_EXCLUSIVE_ACCESS(), and increases the likelihood for KCSAN to detect
+ * racing accesses.
+ *
+ * @var: variable to assert on
+ */
+#define ASSERT_EXCLUSIVE_ACCESS_SCOPED(var)                                    \
+	__ASSERT_EXCLUSIVE_SCOPED(var, KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ASSERT, __COUNTER__)
+
+/**
+ * ASSERT_EXCLUSIVE_BITS - assert no concurrent writes to subset of bits in @var
+ *
+ * Bit-granular variant of ASSERT_EXCLUSIVE_WRITER().
+ *
+ * Assert that there are no concurrent writes to a subset of bits in @var;
+ * concurrent readers are permitted. This assertion captures more detailed
+ * bit-level properties, compared to the other (word granularity) assertions.
+ * Only the bits set in @mask are checked for concurrent modifications, while
+ * ignoring the remaining bits, i.e. concurrent writes (or reads) to ~mask bits
+ * are ignored.
+ *
+ * Use this for variables, where some bits must not be modified concurrently,
+ * yet other bits are expected to be modified concurrently.
+ *
+ * For example, variables where, after initialization, some bits are read-only,
+ * but other bits may still be modified concurrently. A reader may wish to
+ * assert that this is true as follows:
+ *
+ * .. code-block:: c
+ *
+ *	ASSERT_EXCLUSIVE_BITS(flags, READ_ONLY_MASK);
+ *	foo = (READ_ONCE(flags) & READ_ONLY_MASK) >> READ_ONLY_SHIFT;
+ *
+ * Note: The access that immediately follows ASSERT_EXCLUSIVE_BITS() is assumed
+ * to access the masked bits only, and KCSAN optimistically assumes it is
+ * therefore safe, even in the presence of data races, and marking it with
+ * READ_ONCE() is optional from KCSAN's point-of-view. We caution, however, that
+ * it may still be advisable to do so, since we cannot reason about all compiler
+ * optimizations when it comes to bit manipulations (on the reader and writer
+ * side). If you are sure nothing can go wrong, we can write the above simply
+ * as:
+ *
+ * .. code-block:: c
+ *
+ *	ASSERT_EXCLUSIVE_BITS(flags, READ_ONLY_MASK);
+ *	foo = (flags & READ_ONLY_MASK) >> READ_ONLY_SHIFT;
+ *
+ * Another example, where this may be used, is when certain bits of @var may
+ * only be modified when holding the appropriate lock, but other bits may still
+ * be modified concurrently. Writers, where other bits may change concurrently,
+ * could use the assertion as follows:
+ *
+ * .. code-block:: c
+ *
+ *	spin_lock(&foo_lock);
+ *	ASSERT_EXCLUSIVE_BITS(flags, FOO_MASK);
+ *	old_flags = flags;
+ *	new_flags = (old_flags & ~FOO_MASK) | (new_foo << FOO_SHIFT);
+ *	if (cmpxchg(&flags, old_flags, new_flags) != old_flags) { ... }
+ *	spin_unlock(&foo_lock);
+ *
+ * @var: variable to assert on
+ * @mask: only check for modifications to bits set in @mask
+ */
+#define ASSERT_EXCLUSIVE_BITS(var, mask)                                       \
+	do {                                                                   \
+		kcsan_set_access_mask(mask);                                   \
+		__kcsan_check_access(&(var), sizeof(var), KCSAN_ACCESS_ASSERT);\
+		kcsan_set_access_mask(0);                                      \
+		kcsan_atomic_next(1);                                          \
+	} while (0)
+
+#endif /* _LINUX_KCSAN_CHECKS_H */
diff --git a/include/linux/kcsan.h b/include/linux/kcsan.h
new file mode 100644
index 000000000000..53340d8789f9
--- /dev/null
+++ b/include/linux/kcsan.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _LINUX_KCSAN_H
+#define _LINUX_KCSAN_H
+
+#include <linux/kcsan-checks.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_KCSAN
+
+/*
+ * Context for each thread of execution: for tasks, this is stored in
+ * task_struct, and interrupts access internal per-CPU storage.
+ */
+struct kcsan_ctx {
+	int disable_count; /* disable counter */
+	int atomic_next; /* number of following atomic ops */
+
+	/*
+	 * We distinguish between: (a) nestable atomic regions that may contain
+	 * other nestable regions; and (b) flat atomic regions that do not keep
+	 * track of nesting. Both (a) and (b) are entirely independent of each
+	 * other, and a flat region may be started in a nestable region or
+	 * vice-versa.
+	 *
+	 * This is required because, for example, in the annotations for
+	 * seqlocks, we declare seqlock writer critical sections as (a) nestable
+	 * atomic regions, but reader critical sections as (b) flat atomic
+	 * regions, but have encountered cases where seqlock reader critical
+	 * sections are contained within writer critical sections (the opposite
+	 * may be possible, too).
+	 *
+	 * To support these cases, we independently track the depth of nesting
+	 * for (a), and whether the leaf level is flat for (b).
+	 */
+	int atomic_nest_count;
+	bool in_flat_atomic;
+
+	/*
+	 * Access mask for all accesses if non-zero.
+	 */
+	unsigned long access_mask;
+
+	/* List of scoped accesses. */
+	struct list_head scoped_accesses;
+};
+
+/**
+ * kcsan_init - initialize KCSAN runtime
+ */
+void kcsan_init(void);
+
+#else /* CONFIG_KCSAN */
+
+static inline void kcsan_init(void)			{ }
+
+#endif /* CONFIG_KCSAN */
+
+#endif /* _LINUX_KCSAN_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 9b7a8d74a9d6..04a5885cec1b 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -520,6 +520,12 @@ static inline u32 int_sqrt64(u64 x)
 }
 #endif
 
+#ifdef CONFIG_SMP
+extern unsigned int sysctl_oops_all_cpu_backtrace;
+#else
+#define sysctl_oops_all_cpu_backtrace 0
+#endif /* CONFIG_SMP */
+
 extern void bust_spinlocks(int yes);
 extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
 extern int panic_timeout;
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 1776eb2e43a4..ea67910ae6b7 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -208,7 +208,7 @@ struct crash_mem_range {
 struct crash_mem {
 	unsigned int max_nr_ranges;
 	unsigned int nr_ranges;
-	struct crash_mem_range ranges[0];
+	struct crash_mem_range ranges[];
 };
 
 extern int crash_exclude_mem_range(struct crash_mem *mem,
diff --git a/include/linux/key.h b/include/linux/key.h
index 6cf8e71cf8b7..b99b40db08fc 100644
--- a/include/linux/key.h
+++ b/include/linux/key.h
@@ -176,6 +176,9 @@ struct key {
 		struct list_head graveyard_link;
 		struct rb_node	serial_node;
 	};
+#ifdef CONFIG_KEY_NOTIFICATIONS
+	struct watch_list	*watchers;	/* Entities watching this key for changes */
+#endif
 	struct rw_semaphore	sem;		/* change vs change sem */
 	struct key_user		*user;		/* owner of this key */
 	void			*security;	/* security data for this key */
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index e2ca0a292e21..fc8d83e91379 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -7,7 +7,7 @@
  * Copyright (c) 2006-2008 Greg Kroah-Hartman <greg@kroah.com>
  * Copyright (c) 2006-2008 Novell Inc.
  *
- * Please read Documentation/kobject.txt before using the kobject
+ * Please read Documentation/core-api/kobject.rst before using the kobject
  * interface, ESPECIALLY the parts about reference counts and object
  * destructors.
  */
diff --git a/include/linux/kobject_ns.h b/include/linux/kobject_ns.h
index 069aa2ebef90..2b5b64256cf4 100644
--- a/include/linux/kobject_ns.h
+++ b/include/linux/kobject_ns.h
@@ -8,7 +8,7 @@
  *
  * Split from kobject.h by David Howells (dhowells@redhat.com)
  *
- * Please read Documentation/kobject.txt before using the kobject
+ * Please read Documentation/core-api/kobject.rst before using the kobject
  * interface, ESPECIALLY the parts about reference counts and object
  * destructors.
  */
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 04bdaf01112c..e210af75ee38 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -161,7 +161,7 @@ struct kretprobe_instance {
 	kprobe_opcode_t *ret_addr;
 	struct task_struct *task;
 	void *fp;
-	char data[0];
+	char data[];
 };
 
 struct kretprobe_blackpoint {
@@ -312,7 +312,7 @@ DEFINE_INSN_CACHE_OPS(optinsn);
 #ifdef CONFIG_SYSCTL
 extern int sysctl_kprobes_optimization;
 extern int proc_kprobes_optimization_handler(struct ctl_table *table,
-					     int write, void __user *buffer,
+					     int write, void *buffer,
 					     size_t *length, loff_t *ppos);
 #endif
 extern void wait_for_kprobe_optimizer(void);
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 8bbcaad7ef0f..12258ea077cf 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -5,6 +5,8 @@
 #include <linux/err.h>
 #include <linux/sched.h>
 
+struct mm_struct;
+
 __printf(4, 5)
 struct task_struct *kthread_create_on_node(int (*threadfn)(void *data),
 					   void *data,
@@ -198,6 +200,9 @@ bool kthread_cancel_delayed_work_sync(struct kthread_delayed_work *work);
 
 void kthread_destroy_worker(struct kthread_worker *worker);
 
+void kthread_use_mm(struct mm_struct *mm);
+void kthread_unuse_mm(struct mm_struct *mm);
+
 struct cgroup_subsys_state;
 
 #ifdef CONFIG_BLK_CGROUP
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 01276e3d01b9..bcca2cab676a 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -409,7 +409,7 @@ struct kvm_irq_routing_table {
 	 * Array indexed by gsi. Each entry contains list of irq chips
 	 * the gsi is connected to.
 	 */
-	struct hlist_head map[0];
+	struct hlist_head map[];
 };
 #endif
 
@@ -503,6 +503,7 @@ struct kvm {
 	struct srcu_struct srcu;
 	struct srcu_struct irq_srcu;
 	pid_t userspace_pid;
+	unsigned int max_halt_poll_ns;
 };
 
 #define kvm_err(fmt, ...) \
@@ -866,7 +867,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state);
 int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 					struct kvm_guest_debug *dbg);
-int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run);
+int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu);
 
 int kvm_arch_init(void *opaque);
 void kvm_arch_exit(void);
@@ -1130,6 +1131,11 @@ struct kvm_stats_debugfs_item {
 #define KVM_DBGFS_GET_MODE(dbgfs_item)                                         \
 	((dbgfs_item)->mode ? (dbgfs_item)->mode : 0644)
 
+#define VM_STAT(n, x, ...) 							\
+	{ n, offsetof(struct kvm, stat.x), KVM_STAT_VM, ## __VA_ARGS__ }
+#define VCPU_STAT(n, x, ...)							\
+	{ n, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU, ## __VA_ARGS__ }
+
 extern struct kvm_stats_debugfs_item debugfs_entries[];
 extern struct dentry *kvm_debugfs_dir;
 
@@ -1352,6 +1358,12 @@ static inline void kvm_vcpu_set_dy_eligible(struct kvm_vcpu *vcpu, bool val)
 }
 #endif /* CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT */
 
+static inline bool kvm_is_visible_memslot(struct kvm_memory_slot *memslot)
+{
+	return (memslot && memslot->id < KVM_USER_MEM_SLOTS &&
+		!(memslot->flags & KVM_MEMSLOT_INVALID));
+}
+
 struct kvm_vcpu *kvm_get_running_vcpu(void);
 struct kvm_vcpu * __percpu *kvm_get_running_vcpus(void);
 
diff --git a/include/linux/latencytop.h b/include/linux/latencytop.h
index 9022f0c2e2e4..abe3d95f795b 100644
--- a/include/linux/latencytop.h
+++ b/include/linux/latencytop.h
@@ -38,8 +38,8 @@ account_scheduler_latency(struct task_struct *task, int usecs, int inter)
 
 void clear_tsk_latency_tracing(struct task_struct *p);
 
-extern int sysctl_latencytop(struct ctl_table *table, int write,
-			void __user *buffer, size_t *lenp, loff_t *ppos);
+int sysctl_latencytop(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos);
 
 #else
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index cffa4714bfa8..8bf5e59a7859 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -609,7 +609,7 @@ struct ata_host {
 	struct task_struct	*eh_owner;
 
 	struct ata_port		*simplex_claimed;	/* channel owning the DMA */
-	struct ata_port		*ports[0];
+	struct ata_port		*ports[];
 };
 
 struct ata_queued_cmd {
@@ -1092,6 +1092,7 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd,
 #define ATA_SCSI_COMPAT_IOCTL /* empty */
 #endif
 extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
+bool ata_scsi_dma_need_drain(struct request *rq);
 extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
 			    unsigned int cmd, void __user *arg);
 extern bool ata_link_online(struct ata_link *link);
@@ -1387,6 +1388,7 @@ extern struct device_attribute *ata_common_sdev_attrs[];
 	.ioctl			= ata_scsi_ioctl,		\
 	ATA_SCSI_COMPAT_IOCTL					\
 	.queuecommand		= ata_scsi_queuecmd,		\
+	.dma_need_drain		= ata_scsi_dma_need_drain,	\
 	.can_queue		= ATA_DEF_QUEUE,		\
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,		\
 	.this_id		= ATA_SHT_THIS_ID,		\
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 9280209d1f62..d796ec20d114 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -105,7 +105,7 @@
 
 /* === DEPRECATED annotations === */
 
-#ifndef CONFIG_X86
+#ifndef CONFIG_ARCH_USE_SYM_ANNOTATIONS
 #ifndef GLOBAL
 /* deprecated, use SYM_DATA*, SYM_ENTRY, or similar */
 #define GLOBAL(name) \
@@ -118,10 +118,10 @@
 #define ENTRY(name) \
 	SYM_FUNC_START(name)
 #endif
-#endif /* CONFIG_X86 */
+#endif /* CONFIG_ARCH_USE_SYM_ANNOTATIONS */
 #endif /* LINKER_SCRIPT */
 
-#ifndef CONFIG_X86
+#ifndef CONFIG_ARCH_USE_SYM_ANNOTATIONS
 #ifndef WEAK
 /* deprecated, use SYM_FUNC_START_WEAK* */
 #define WEAK(name)	   \
@@ -143,7 +143,7 @@
 #define ENDPROC(name) \
 	SYM_FUNC_END(name)
 #endif
-#endif /* CONFIG_X86 */
+#endif /* CONFIG_ARCH_USE_SYM_ANNOTATIONS */
 
 /* === generic annotations === */
 
diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h
index 99d629fd9944..28f23b341c1c 100644
--- a/include/linux/lsm_audit.h
+++ b/include/linux/lsm_audit.h
@@ -75,6 +75,7 @@ struct common_audit_data {
 #define LSM_AUDIT_DATA_IBPKEY	13
 #define LSM_AUDIT_DATA_IBENDPORT 14
 #define LSM_AUDIT_DATA_LOCKDOWN 15
+#define LSM_AUDIT_DATA_NOTIFICATION 16
 	union 	{
 		struct path path;
 		struct dentry *dentry;
diff --git a/include/linux/lsm_hook_defs.h b/include/linux/lsm_hook_defs.h
index 9cd4455528e5..4f8d63fd1327 100644
--- a/include/linux/lsm_hook_defs.h
+++ b/include/linux/lsm_hook_defs.h
@@ -252,6 +252,16 @@ LSM_HOOK(int, 0, inode_notifysecctx, struct inode *inode, void *ctx, u32 ctxlen)
 LSM_HOOK(int, 0, inode_setsecctx, struct dentry *dentry, void *ctx, u32 ctxlen)
 LSM_HOOK(int, 0, inode_getsecctx, struct inode *inode, void **ctx,
 	 u32 *ctxlen)
+#ifdef CONFIG_KEY_NOTIFICATIONS
+LSM_HOOK(int, 0, watch_key, struct key *key)
+#endif
+#ifdef CONFIG_DEVICE_NOTIFICATIONS
+LSM_HOOK(int, 0, watch_devices, void)
+#endif
+#ifdef CONFIG_WATCH_QUEUE
+LSM_HOOK(int, 0, post_notification, const struct cred *w_cred,
+	 const struct cred *cred, struct watch_notification *n)
+#endif
 
 #ifdef CONFIG_SECURITY_NETWORK
 LSM_HOOK(int, 0, unix_stream_connect, struct sock *sock, struct sock *other,
diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
index 988ca0df7824..23bd89a3d369 100644
--- a/include/linux/lsm_hooks.h
+++ b/include/linux/lsm_hooks.h
@@ -1437,6 +1437,24 @@
  *	@ctx is a pointer in which to place the allocated security context.
  *	@ctxlen points to the place to put the length of @ctx.
  *
+ * Security hooks for the general notification queue:
+ *
+ * @watch_key:
+ *	Check to see if a process is allowed to watch for event notifications
+ *	from a key or keyring.
+ *	@key: The key to watch.
+ *
+ * @watch_devices:
+ *	Check to see if a process is allowed to watch for event notifications
+ *	from devices (as a global set).
+ *
+ * @post_notification:
+ *	Check to see if a watch notification can be posted to a particular
+ *	queue.
+ *	@w_cred: The credentials of the whoever set the watch.
+ *	@cred: The event-triggerer's credentials
+ *	@n: The notification being posted
+ *
  * Security hooks for using the eBPF maps and programs functionalities through
  * eBPF syscalls.
  *
diff --git a/include/linux/mailbox/zynqmp-ipi-message.h b/include/linux/mailbox/zynqmp-ipi-message.h
index 9542b41eacfd..35ce84c8ca02 100644
--- a/include/linux/mailbox/zynqmp-ipi-message.h
+++ b/include/linux/mailbox/zynqmp-ipi-message.h
@@ -14,7 +14,7 @@
  */
 struct zynqmp_ipi_message {
 	size_t len;
-	u8 data[0];
+	u8 data[];
 };
 
 #endif /* _LINUX_ZYNQMP_IPI_MESSAGE_H_ */
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 6bc37a731d27..45abfc54da37 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -50,7 +50,7 @@ struct memblock_region {
 	phys_addr_t base;
 	phys_addr_t size;
 	enum memblock_flags flags;
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+#ifdef CONFIG_NEED_MULTIPLE_NODES
 	int nid;
 #endif
 };
@@ -215,7 +215,6 @@ static inline bool memblock_is_nomap(struct memblock_region *m)
 	return m->flags & MEMBLOCK_NOMAP;
 }
 
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 int memblock_search_pfn_nid(unsigned long pfn, unsigned long *start_pfn,
 			    unsigned long  *end_pfn);
 void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn,
@@ -234,7 +233,6 @@ void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn,
 #define for_each_mem_pfn_range(i, nid, p_start, p_end, p_nid)		\
 	for (i = -1, __next_mem_pfn_range(&i, nid, p_start, p_end, p_nid); \
 	     i >= 0; __next_mem_pfn_range(&i, nid, p_start, p_end, p_nid))
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
 
 #ifdef CONFIG_DEFERRED_STRUCT_PAGE_INIT
 void __next_mem_pfn_range_in_zone(u64 *idx, struct zone *zone,
@@ -310,10 +308,10 @@ void __next_mem_pfn_range_in_zone(u64 *idx, struct zone *zone,
 	for_each_mem_range_rev(i, &memblock.memory, &memblock.reserved,	\
 			       nid, flags, p_start, p_end, p_nid)
 
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 int memblock_set_node(phys_addr_t base, phys_addr_t size,
 		      struct memblock_type *type, int nid);
 
+#ifdef CONFIG_NEED_MULTIPLE_NODES
 static inline void memblock_set_region_node(struct memblock_region *r, int nid)
 {
 	r->nid = nid;
@@ -332,7 +330,7 @@ static inline int memblock_get_region_node(const struct memblock_region *r)
 {
 	return 0;
 }
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
 
 /* Flags for memblock allocation APIs */
 #define MEMBLOCK_ALLOC_ANYWHERE	(~(phys_addr_t)0)
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index d275c72c4f8e..b67dd43aaa4b 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -50,12 +50,6 @@ enum memcg_memory_event {
 	MEMCG_NR_MEMORY_EVENTS,
 };
 
-enum mem_cgroup_protection {
-	MEMCG_PROT_NONE,
-	MEMCG_PROT_LOW,
-	MEMCG_PROT_MIN,
-};
-
 struct mem_cgroup_reclaim_cookie {
 	pg_data_t *pgdat;
 	unsigned int generation;
@@ -357,8 +351,26 @@ static inline unsigned long mem_cgroup_protection(struct mem_cgroup *memcg,
 		   READ_ONCE(memcg->memory.elow));
 }
 
-enum mem_cgroup_protection mem_cgroup_protected(struct mem_cgroup *root,
-						struct mem_cgroup *memcg);
+void mem_cgroup_calculate_protection(struct mem_cgroup *root,
+				     struct mem_cgroup *memcg);
+
+static inline bool mem_cgroup_below_low(struct mem_cgroup *memcg)
+{
+	if (mem_cgroup_disabled())
+		return false;
+
+	return READ_ONCE(memcg->memory.elow) >=
+		page_counter_read(&memcg->memory);
+}
+
+static inline bool mem_cgroup_below_min(struct mem_cgroup *memcg)
+{
+	if (mem_cgroup_disabled())
+		return false;
+
+	return READ_ONCE(memcg->memory.emin) >=
+		page_counter_read(&memcg->memory);
+}
 
 int mem_cgroup_try_charge(struct page *page, struct mm_struct *mm,
 			  gfp_t gfp_mask, struct mem_cgroup **memcgp,
@@ -533,7 +545,7 @@ unsigned long mem_cgroup_get_zone_lru_size(struct lruvec *lruvec,
 	struct mem_cgroup_per_node *mz;
 
 	mz = container_of(lruvec, struct mem_cgroup_per_node, lruvec);
-	return mz->lru_zone_size[zone_idx][lru];
+	return READ_ONCE(mz->lru_zone_size[zone_idx][lru]);
 }
 
 void mem_cgroup_handle_over_high(void);
@@ -835,16 +847,25 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
 {
 }
 
+static inline void mem_cgroup_calculate_protection(struct mem_cgroup *root,
+						   struct mem_cgroup *memcg)
+{
+}
+
 static inline unsigned long mem_cgroup_protection(struct mem_cgroup *memcg,
-						  bool in_low_reclaim)
+					 bool in_low_reclaim)
 {
 	return 0;
 }
 
-static inline enum mem_cgroup_protection mem_cgroup_protected(
-	struct mem_cgroup *root, struct mem_cgroup *memcg)
+static inline bool mem_cgroup_below_low(struct mem_cgroup *memcg)
 {
-	return MEMCG_PROT_NONE;
+	return false;
+}
+
+static inline bool mem_cgroup_below_min(struct mem_cgroup *memcg)
+{
+	return false;
 }
 
 static inline int mem_cgroup_try_charge(struct page *page, struct mm_struct *mm,
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 93d9ada74ddd..7dca9cd6076b 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -314,19 +314,12 @@ static inline void pgdat_resize_init(struct pglist_data *pgdat) {}
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
 
-extern bool is_mem_section_removable(unsigned long pfn, unsigned long nr_pages);
 extern void try_offline_node(int nid);
 extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages);
 extern int remove_memory(int nid, u64 start, u64 size);
 extern void __remove_memory(int nid, u64 start, u64 size);
 
 #else
-static inline bool is_mem_section_removable(unsigned long pfn,
-					unsigned long nr_pages)
-{
-	return false;
-}
-
 static inline void try_offline_node(int nid) {}
 
 static inline int offline_pages(unsigned long start_pfn, unsigned long nr_pages)
diff --git a/include/linux/memremap.h b/include/linux/memremap.h
index 5f5b2df06e61..fac75e5a723b 100644
--- a/include/linux/memremap.h
+++ b/include/linux/memremap.h
@@ -125,6 +125,7 @@ static inline struct vmem_altmap *pgmap_altmap(struct dev_pagemap *pgmap)
 }
 
 #ifdef CONFIG_ZONE_DEVICE
+bool pfn_zone_device_reserved(unsigned long pfn);
 void *memremap_pages(struct dev_pagemap *pgmap, int nid);
 void memunmap_pages(struct dev_pagemap *pgmap);
 void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap);
@@ -136,6 +137,11 @@ unsigned long vmem_altmap_offset(struct vmem_altmap *altmap);
 void vmem_altmap_free(struct vmem_altmap *altmap, unsigned long nr_pfns);
 unsigned long memremap_compat_align(void);
 #else
+static inline bool pfn_zone_device_reserved(unsigned long pfn)
+{
+	return false;
+}
+
 static inline void *devm_memremap_pages(struct device *dev,
 		struct dev_pagemap *pgmap)
 {
diff --git a/include/linux/memstick.h b/include/linux/memstick.h
index 216a713bef7f..da4c65f9435f 100644
--- a/include/linux/memstick.h
+++ b/include/linux/memstick.h
@@ -288,7 +288,7 @@ struct memstick_host {
 	int                 (*set_param)(struct memstick_host *host,
 					 enum memstick_param param,
 					 int value);
-	unsigned long       private[0] ____cacheline_aligned;
+	unsigned long       private[] ____cacheline_aligned;
 };
 
 struct memstick_driver {
diff --git a/include/linux/mfd/intel_pmc_bxt.h b/include/linux/mfd/intel_pmc_bxt.h
new file mode 100644
index 000000000000..f51a43d25ffd
--- /dev/null
+++ b/include/linux/mfd/intel_pmc_bxt.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef MFD_INTEL_PMC_BXT_H
+#define MFD_INTEL_PMC_BXT_H
+
+/* GCR reg offsets from GCR base */
+#define PMC_GCR_PMC_CFG_REG		0x08
+#define PMC_GCR_TELEM_DEEP_S0IX_REG	0x78
+#define PMC_GCR_TELEM_SHLW_S0IX_REG	0x80
+
+/* PMC_CFG_REG bit masks */
+#define PMC_CFG_NO_REBOOT_EN		BIT(4)
+
+/**
+ * struct intel_pmc_dev - Intel PMC device structure
+ * @dev: Pointer to the parent PMC device
+ * @scu: Pointer to the SCU IPC device data structure
+ * @gcr_mem_base: Virtual base address of GCR (Global Configuration Registers)
+ * @gcr_lock: Lock used to serialize access to GCR registers
+ * @telem_base: Pointer to telemetry SSRAM base resource or %NULL if not
+ *		available
+ */
+struct intel_pmc_dev {
+	struct device *dev;
+	struct intel_scu_ipc_dev *scu;
+	void __iomem *gcr_mem_base;
+	spinlock_t gcr_lock;
+	struct resource *telem_base;
+};
+
+#if IS_ENABLED(CONFIG_MFD_INTEL_PMC_BXT)
+int intel_pmc_gcr_read64(struct intel_pmc_dev *pmc, u32 offset, u64 *data);
+int intel_pmc_gcr_update(struct intel_pmc_dev *pmc, u32 offset, u32 mask, u32 val);
+int intel_pmc_s0ix_counter_read(struct intel_pmc_dev *pmc, u64 *data);
+#else
+static inline int intel_pmc_gcr_read64(struct intel_pmc_dev *pmc, u32 offset,
+				       u64 *data)
+{
+	return -ENOTSUPP;
+}
+
+static inline int intel_pmc_gcr_update(struct intel_pmc_dev *pmc, u32 offset,
+				       u32 mask, u32 val)
+{
+	return -ENOTSUPP;
+}
+
+static inline int intel_pmc_s0ix_counter_read(struct intel_pmc_dev *pmc, u64 *data)
+{
+	return -ENOTSUPP;
+}
+#endif
+
+#endif /* MFD_INTEL_PMC_BXT_H */
diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h
index bfecd6bd4990..6a88e34cb955 100644
--- a/include/linux/mfd/intel_soc_pmic.h
+++ b/include/linux/mfd/intel_soc_pmic.h
@@ -13,6 +13,20 @@
 
 #include <linux/regmap.h>
 
+/**
+ * struct intel_soc_pmic - Intel SoC PMIC data
+ * @irq: Master interrupt number of the parent PMIC device
+ * @regmap: Pointer to the parent PMIC device regmap structure
+ * @irq_chip_data: IRQ chip data for the PMIC itself
+ * @irq_chip_data_pwrbtn: Chained IRQ chip data for the Power Button
+ * @irq_chip_data_tmu: Chained IRQ chip data for the Time Management Unit
+ * @irq_chip_data_bcu: Chained IRQ chip data for the Burst Control Unit
+ * @irq_chip_data_adc: Chained IRQ chip data for the General Purpose ADC
+ * @irq_chip_data_chgr: Chained IRQ chip data for the External Charger
+ * @irq_chip_data_crit: Chained IRQ chip data for the Critical Event Handler
+ * @dev: Pointer to the parent PMIC device
+ * @scu: Pointer to the SCU IPC device data structure
+ */
 struct intel_soc_pmic {
 	int irq;
 	struct regmap *regmap;
@@ -24,6 +38,7 @@ struct intel_soc_pmic {
 	struct regmap_irq_chip_data *irq_chip_data_chgr;
 	struct regmap_irq_chip_data *irq_chip_data_crit;
 	struct device *dev;
+	struct intel_scu_ipc_dev *scu;
 };
 
 int intel_soc_pmic_exec_mipi_pmic_seq_element(u16 i2c_address, u32 reg_address,
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 8e2828d48d7f..9db93e487496 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -362,7 +362,7 @@ struct mlx4_wqe_datagram_seg {
 
 struct mlx4_wqe_lso_seg {
 	__be32			mss_hdr_size;
-	__be32			header[0];
+	__be32			header[];
 };
 
 enum mlx4_wqe_bind_seg_flags2 {
diff --git a/include/linux/mlx5/accel.h b/include/linux/mlx5/accel.h
index 5613e677a5f9..b919d143a9a6 100644
--- a/include/linux/mlx5/accel.h
+++ b/include/linux/mlx5/accel.h
@@ -92,6 +92,18 @@ struct mlx5_accel_esp_xfrm_attrs {
 	union {
 		struct aes_gcm_keymat aes_gcm;
 	} keymat;
+
+	union {
+		__be32 a4;
+		__be32 a6[4];
+	} saddr;
+
+	union {
+		__be32 a4;
+		__be32 a6[4];
+	} daddr;
+
+	u8 is_ipv6;
 };
 
 struct mlx5_accel_esp_xfrm {
diff --git a/include/linux/mlx5/cmd.h b/include/linux/mlx5/cmd.h
deleted file mode 100644
index 68cd08f02c2f..000000000000
--- a/include/linux/mlx5/cmd.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (c) 2013-2015, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef MLX5_CMD_H
-#define MLX5_CMD_H
-
-#include <linux/types.h>
-
-struct manage_pages_layout {
-	u64	ptr;
-	u32	reserved;
-	u16	num_entries;
-	u16	func_id;
-};
-
-
-struct mlx5_cmd_alloc_uar_imm_out {
-	u32	rsvd[3];
-	u32	uarn;
-};
-
-#endif /* MLX5_CMD_H */
diff --git a/include/linux/mlx5/cq.h b/include/linux/mlx5/cq.h
index 40748fc1b11b..b5a9399e07ee 100644
--- a/include/linux/mlx5/cq.h
+++ b/include/linux/mlx5/cq.h
@@ -188,7 +188,7 @@ int mlx5_core_create_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
 			u32 *in, int inlen, u32 *out, int outlen);
 int mlx5_core_destroy_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq);
 int mlx5_core_query_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
-		       u32 *out, int outlen);
+		       u32 *out);
 int mlx5_core_modify_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
 			u32 *in, int inlen);
 int mlx5_core_modify_cq_moderation(struct mlx5_core_dev *dev,
diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h
index 2b90097a6cf9..1bc27aca648b 100644
--- a/include/linux/mlx5/device.h
+++ b/include/linux/mlx5/device.h
@@ -364,6 +364,7 @@ enum {
 enum {
 	MLX5_GENERAL_SUBTYPE_DELAY_DROP_TIMEOUT = 0x1,
 	MLX5_GENERAL_SUBTYPE_PCI_POWER_CHANGE_EVENT = 0x5,
+	MLX5_GENERAL_SUBTYPE_PCI_SYNC_FOR_FW_UPDATE_EVENT = 0x8,
 };
 
 enum {
@@ -449,10 +450,12 @@ enum {
 
 enum {
 	MLX5_OPC_MOD_TLS_TIS_STATIC_PARAMS = 0x1,
+	MLX5_OPC_MOD_TLS_TIR_STATIC_PARAMS = 0x2,
 };
 
 enum {
 	MLX5_OPC_MOD_TLS_TIS_PROGRESS_PARAMS = 0x1,
+	MLX5_OPC_MOD_TLS_TIR_PROGRESS_PARAMS = 0x2,
 };
 
 enum {
@@ -689,6 +692,19 @@ struct mlx5_eqe_temp_warning {
 	__be64 sensor_warning_lsb;
 } __packed;
 
+#define SYNC_RST_STATE_MASK    0xf
+
+enum sync_rst_state_type {
+	MLX5_SYNC_RST_STATE_RESET_REQUEST	= 0x0,
+	MLX5_SYNC_RST_STATE_RESET_NOW		= 0x1,
+	MLX5_SYNC_RST_STATE_RESET_ABORT		= 0x2,
+};
+
+struct mlx5_eqe_sync_fw_update {
+	u8 reserved_at_0[3];
+	u8 sync_rst_state;
+};
+
 union ev_data {
 	__be32				raw[7];
 	struct mlx5_eqe_cmd		cmd;
@@ -707,6 +723,7 @@ union ev_data {
 	struct mlx5_eqe_dct             dct;
 	struct mlx5_eqe_temp_warning	temp_warning;
 	struct mlx5_eqe_xrq_err		xrq_err;
+	struct mlx5_eqe_sync_fw_update	sync_fw_update;
 } __packed;
 
 struct mlx5_eqe {
@@ -749,7 +766,7 @@ struct mlx5_err_cqe {
 };
 
 struct mlx5_cqe64 {
-	u8		outer_l3_tunneled;
+	u8		tls_outer_l3_tunneled;
 	u8		rsvd0;
 	__be16		wqe_id;
 	u8		lro_tcppsh_abort_dupack;
@@ -767,7 +784,12 @@ struct mlx5_cqe64 {
 	u8		l4_l3_hdr_type;
 	__be16		vlan_info;
 	__be32		srqn; /* [31:24]: lro_num_seg, [23:0]: srqn */
-	__be32		imm_inval_pkey;
+	union {
+		__be32 immediate;
+		__be32 inval_rkey;
+		__be32 pkey;
+		__be32 ft_metadata;
+	};
 	u8		rsvd40[4];
 	__be32		byte_cnt;
 	__be32		timestamp_h;
@@ -834,7 +856,12 @@ static inline u8 get_cqe_l3_hdr_type(struct mlx5_cqe64 *cqe)
 
 static inline bool cqe_is_tunneled(struct mlx5_cqe64 *cqe)
 {
-	return cqe->outer_l3_tunneled & 0x1;
+	return cqe->tls_outer_l3_tunneled & 0x1;
+}
+
+static inline u8 get_cqe_tls_offload(struct mlx5_cqe64 *cqe)
+{
+	return (cqe->tls_outer_l3_tunneled >> 3) & 0x3;
 }
 
 static inline bool cqe_has_vlan(struct mlx5_cqe64 *cqe)
@@ -922,6 +949,13 @@ enum {
 	CQE_L4_OK	= 1 << 2,
 };
 
+enum {
+	CQE_TLS_OFFLOAD_NOT_DECRYPTED		= 0x0,
+	CQE_TLS_OFFLOAD_DECRYPTED		= 0x1,
+	CQE_TLS_OFFLOAD_RESYNC			= 0x2,
+	CQE_TLS_OFFLOAD_ERROR			= 0x3,
+};
+
 struct mlx5_sig_err_cqe {
 	u8		rsvd0[16];
 	__be32		expected_trans_sig;
@@ -1107,6 +1141,7 @@ enum mlx5_cap_type {
 	MLX5_CAP_TLS,
 	MLX5_CAP_VDPA_EMULATION = 0x13,
 	MLX5_CAP_DEV_EVENT = 0x14,
+	MLX5_CAP_IPSEC,
 	/* NUM OF CAP Types */
 	MLX5_CAP_NUM
 };
@@ -1324,6 +1359,9 @@ enum mlx5_qcam_feature_groups {
 	MLX5_GET64(device_virtio_emulation_cap, \
 		(mdev)->caps.hca_cur[MLX5_CAP_VDPA_EMULATION], cap)
 
+#define MLX5_CAP_IPSEC(mdev, cap)\
+	MLX5_GET(ipsec_cap, (mdev)->caps.hca_cur[MLX5_CAP_IPSEC], cap)
+
 enum {
 	MLX5_CMD_STAT_OK			= 0x0,
 	MLX5_CMD_STAT_INT_ERR			= 0x1,
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 6f8f79ef829b..03a798beb43e 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -130,6 +130,7 @@ enum {
 	MLX5_REG_NODE_DESC	 = 0x6001,
 	MLX5_REG_HOST_ENDIANNESS = 0x7004,
 	MLX5_REG_MCIA		 = 0x9014,
+	MLX5_REG_MFRL		 = 0x9028,
 	MLX5_REG_MLCR		 = 0x902b,
 	MLX5_REG_MTRC_CAP	 = 0x9040,
 	MLX5_REG_MTRC_CONF	 = 0x9041,
@@ -200,7 +201,7 @@ struct mlx5_rsc_debug {
 	void		       *object;
 	enum dbg_rsc_type	type;
 	struct dentry	       *root;
-	struct mlx5_field_desc	fields[0];
+	struct mlx5_field_desc	fields[];
 };
 
 enum mlx5_dev_event {
@@ -541,7 +542,6 @@ struct mlx5_priv {
 	struct mlx5_core_health health;
 
 	/* start: qp staff */
-	struct mlx5_qp_table	qp_table;
 	struct dentry	       *qp_debugfs;
 	struct dentry	       *eq_debugfs;
 	struct dentry	       *cq_debugfs;
@@ -687,7 +687,6 @@ struct mlx5_core_dev {
 	unsigned long		intf_state;
 	struct mlx5_priv	priv;
 	struct mlx5_profile	*profile;
-	atomic_t		num_qps;
 	u32			issi;
 	struct mlx5e_resources  mlx5e_res;
 	struct mlx5_dm          *dm;
@@ -903,6 +902,19 @@ int mlx5_cmd_exec_cb(struct mlx5_async_ctx *ctx, void *in, int in_size,
 
 int mlx5_cmd_exec(struct mlx5_core_dev *dev, void *in, int in_size, void *out,
 		  int out_size);
+
+#define mlx5_cmd_exec_inout(dev, ifc_cmd, in, out)                             \
+	({                                                                     \
+		mlx5_cmd_exec(dev, in, MLX5_ST_SZ_BYTES(ifc_cmd##_in), out,    \
+			      MLX5_ST_SZ_BYTES(ifc_cmd##_out));                \
+	})
+
+#define mlx5_cmd_exec_in(dev, ifc_cmd, in)                                     \
+	({                                                                     \
+		u32 _out[MLX5_ST_SZ_DW(ifc_cmd##_out)] = {};                   \
+		mlx5_cmd_exec_inout(dev, ifc_cmd, in, _out);                   \
+	})
+
 int mlx5_cmd_exec_polling(struct mlx5_core_dev *dev, void *in, int in_size,
 			  void *out, int out_size);
 void mlx5_cmd_mbox_status(void *out, u8 *status, u32 *syndrome);
@@ -1069,7 +1081,8 @@ int mlx5_lag_query_cong_counters(struct mlx5_core_dev *dev,
 struct mlx5_uars_page *mlx5_get_uars_page(struct mlx5_core_dev *mdev);
 void mlx5_put_uars_page(struct mlx5_core_dev *mdev, struct mlx5_uars_page *up);
 int mlx5_dm_sw_icm_alloc(struct mlx5_core_dev *dev, enum mlx5_sw_icm_type type,
-			 u64 length, u16 uid, phys_addr_t *addr, u32 *obj_id);
+			 u64 length, u32 log_alignment, u16 uid,
+			 phys_addr_t *addr, u32 *obj_id);
 int mlx5_dm_sw_icm_dealloc(struct mlx5_core_dev *dev, enum mlx5_sw_icm_type type,
 			   u64 length, u16 uid, phys_addr_t addr, u32 obj_id);
 
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 69b27c7dfc3e..8428f437feba 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -74,6 +74,7 @@ enum {
 	MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE        = 0x0,
 	MLX5_SET_HCA_CAP_OP_MOD_ODP                   = 0x2,
 	MLX5_SET_HCA_CAP_OP_MOD_ATOMIC                = 0x3,
+	MLX5_SET_HCA_CAP_OP_MOD_ROCE                  = 0x4,
 };
 
 enum {
@@ -885,7 +886,8 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
 	u8         tunnel_stateless_vxlan_gpe[0x1];
 	u8         tunnel_stateless_ipv4_over_vxlan[0x1];
 	u8         tunnel_stateless_ip_over_ip[0x1];
-	u8         reserved_at_2a[0x6];
+	u8         insert_trailer[0x1];
+	u8         reserved_at_2b[0x5];
 	u8         max_vxlan_udp_ports[0x8];
 	u8         reserved_at_38[0x6];
 	u8         max_geneve_opt_len[0x1];
@@ -903,7 +905,9 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
 
 struct mlx5_ifc_roce_cap_bits {
 	u8         roce_apm[0x1];
-	u8         reserved_at_1[0x1f];
+	u8         reserved_at_1[0x3];
+	u8         sw_r_roce_src_udp_port[0x1];
+	u8         reserved_at_5[0x1b];
 
 	u8         reserved_at_20[0x60];
 
@@ -1097,6 +1101,23 @@ struct mlx5_ifc_tls_cap_bits {
 	u8         reserved_at_20[0x7e0];
 };
 
+struct mlx5_ifc_ipsec_cap_bits {
+	u8         ipsec_full_offload[0x1];
+	u8         ipsec_crypto_offload[0x1];
+	u8         ipsec_esn[0x1];
+	u8         ipsec_crypto_esp_aes_gcm_256_encrypt[0x1];
+	u8         ipsec_crypto_esp_aes_gcm_128_encrypt[0x1];
+	u8         ipsec_crypto_esp_aes_gcm_256_decrypt[0x1];
+	u8         ipsec_crypto_esp_aes_gcm_128_decrypt[0x1];
+	u8         reserved_at_7[0x4];
+	u8         log_max_ipsec_offload[0x5];
+	u8         reserved_at_10[0x10];
+
+	u8         min_log_ipsec_full_replay_window[0x8];
+	u8         max_log_ipsec_full_replay_window[0x8];
+	u8         reserved_at_30[0x7d0];
+};
+
 enum {
 	MLX5_WQ_TYPE_LINKED_LIST  = 0x0,
 	MLX5_WQ_TYPE_CYCLIC       = 0x1,
@@ -1223,7 +1244,9 @@ struct mlx5_ifc_cmd_hca_cap_bits {
 	u8         reserved_at_130[0xa];
 	u8         log_max_ra_res_dc[0x6];
 
-	u8         reserved_at_140[0x9];
+	u8         reserved_at_140[0x6];
+	u8         release_all_pages[0x1];
+	u8         reserved_at_147[0x2];
 	u8         roce_accl[0x1];
 	u8         log_max_ra_req_qp[0x6];
 	u8         reserved_at_150[0xa];
@@ -1296,7 +1319,9 @@ struct mlx5_ifc_cmd_hca_cap_bits {
 	u8         wol_p[0x1];
 
 	u8         stat_rate_support[0x10];
-	u8         reserved_at_1f0[0xc];
+	u8         reserved_at_1f0[0x1];
+	u8         pci_sync_for_fw_update_event[0x1];
+	u8         reserved_at_1f2[0xa];
 	u8         cqe_version[0x4];
 
 	u8         compact_address_vector[0x1];
@@ -1461,13 +1486,14 @@ struct mlx5_ifc_cmd_hca_cap_bits {
 
 	u8         reserved_at_460[0x3];
 	u8         log_max_uctx[0x5];
-	u8         reserved_at_468[0x3];
+	u8         reserved_at_468[0x2];
+	u8         ipsec_offload[0x1];
 	u8         log_max_umem[0x5];
 	u8         max_num_eqs[0x10];
 
 	u8         reserved_at_480[0x1];
 	u8         tls_tx[0x1];
-	u8         reserved_at_482[0x1];
+	u8         tls_rx[0x1];
 	u8         log_max_l2_table[0x5];
 	u8         reserved_at_488[0x8];
 	u8         log_uar_page_sz[0x10];
@@ -1677,7 +1703,7 @@ struct mlx5_ifc_wq_bits {
 
 	u8         reserved_at_140[0x4c0];
 
-	struct mlx5_ifc_cmd_pas_bits pas[0];
+	struct mlx5_ifc_cmd_pas_bits pas[];
 };
 
 struct mlx5_ifc_rq_num_bits {
@@ -1895,7 +1921,7 @@ struct mlx5_ifc_resource_dump_menu_segment_bits {
 	u8         reserved_at_20[0x10];
 	u8         num_of_records[0x10];
 
-	struct mlx5_ifc_resource_dump_menu_record_bits record[0];
+	struct mlx5_ifc_resource_dump_menu_record_bits record[];
 };
 
 struct mlx5_ifc_resource_dump_resource_segment_bits {
@@ -1907,7 +1933,7 @@ struct mlx5_ifc_resource_dump_resource_segment_bits {
 
 	u8         index2[0x20];
 
-	u8         payload[0][0x20];
+	u8         payload[][0x20];
 };
 
 struct mlx5_ifc_resource_dump_terminate_segment_bits {
@@ -2984,7 +3010,7 @@ struct mlx5_ifc_flow_context_bits {
 
 	u8         reserved_at_1200[0x600];
 
-	union mlx5_ifc_dest_format_struct_flow_counter_list_auto_bits destination[0];
+	union mlx5_ifc_dest_format_struct_flow_counter_list_auto_bits destination[];
 };
 
 enum {
@@ -3112,7 +3138,8 @@ struct mlx5_ifc_tirc_bits {
 	u8         reserved_at_0[0x20];
 
 	u8         disp_type[0x4];
-	u8         reserved_at_24[0x1c];
+	u8         tls_en[0x1];
+	u8         reserved_at_25[0x1b];
 
 	u8         reserved_at_40[0x40];
 
@@ -3276,7 +3303,7 @@ struct mlx5_ifc_rqtc_bits {
 
 	u8         reserved_at_e0[0x6a0];
 
-	struct mlx5_ifc_rq_num_bits rq_num[0];
+	struct mlx5_ifc_rq_num_bits rq_num[];
 };
 
 enum {
@@ -3388,7 +3415,7 @@ struct mlx5_ifc_nic_vport_context_bits {
 
 	u8         reserved_at_7e0[0x20];
 
-	u8         current_uc_mac_address[0][0x40];
+	u8         current_uc_mac_address[][0x40];
 };
 
 enum {
@@ -4140,7 +4167,8 @@ enum {
 	MLX5_SET_FTE_MODIFY_ENABLE_MASK_ACTION    = 0x0,
 	MLX5_SET_FTE_MODIFY_ENABLE_MASK_FLOW_TAG  = 0x1,
 	MLX5_SET_FTE_MODIFY_ENABLE_MASK_DESTINATION_LIST    = 0x2,
-	MLX5_SET_FTE_MODIFY_ENABLE_MASK_FLOW_COUNTERS    = 0x3
+	MLX5_SET_FTE_MODIFY_ENABLE_MASK_FLOW_COUNTERS    = 0x3,
+	MLX5_SET_FTE_MODIFY_ENABLE_MASK_IPSEC_OBJ_ID    = 0x4
 };
 
 struct mlx5_ifc_set_fte_out_bits {
@@ -4310,7 +4338,7 @@ struct mlx5_ifc_query_xrc_srq_out_bits {
 
 	u8         reserved_at_280[0x600];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_query_xrc_srq_in_bits {
@@ -4588,7 +4616,7 @@ struct mlx5_ifc_query_srq_out_bits {
 
 	u8         reserved_at_280[0x600];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_query_srq_in_bits {
@@ -4799,7 +4827,7 @@ struct mlx5_ifc_query_qp_out_bits {
 
 	u8         reserved_at_800[0x80];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_query_qp_in_bits {
@@ -5132,7 +5160,7 @@ struct mlx5_ifc_query_hca_vport_pkey_out_bits {
 
 	u8         reserved_at_40[0x40];
 
-	struct mlx5_ifc_pkey_bits pkey[0];
+	struct mlx5_ifc_pkey_bits pkey[];
 };
 
 struct mlx5_ifc_query_hca_vport_pkey_in_bits {
@@ -5168,7 +5196,7 @@ struct mlx5_ifc_query_hca_vport_gid_out_bits {
 	u8         gids_num[0x10];
 	u8         reserved_at_70[0x10];
 
-	struct mlx5_ifc_array128_auto_bits gid[0];
+	struct mlx5_ifc_array128_auto_bits gid[];
 };
 
 struct mlx5_ifc_query_hca_vport_gid_in_bits {
@@ -5436,7 +5464,7 @@ struct mlx5_ifc_query_flow_counter_out_bits {
 
 	u8         reserved_at_40[0x40];
 
-	struct mlx5_ifc_traffic_counter_bits flow_statistics[0];
+	struct mlx5_ifc_traffic_counter_bits flow_statistics[];
 };
 
 struct mlx5_ifc_query_flow_counter_in_bits {
@@ -5530,7 +5558,7 @@ struct mlx5_ifc_query_eq_out_bits {
 
 	u8         reserved_at_300[0x580];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_query_eq_in_bits {
@@ -5555,7 +5583,7 @@ struct mlx5_ifc_packet_reformat_context_in_bits {
 	u8         reserved_at_20[0x10];
 	u8         reformat_data[2][0x8];
 
-	u8         more_reformat_data[0][0x8];
+	u8         more_reformat_data[][0x8];
 };
 
 struct mlx5_ifc_query_packet_reformat_context_out_bits {
@@ -5566,7 +5594,7 @@ struct mlx5_ifc_query_packet_reformat_context_out_bits {
 
 	u8         reserved_at_40[0xa0];
 
-	struct mlx5_ifc_packet_reformat_context_in_bits packet_reformat_context[0];
+	struct mlx5_ifc_packet_reformat_context_in_bits packet_reformat_context[];
 };
 
 struct mlx5_ifc_query_packet_reformat_context_in_bits {
@@ -5667,9 +5695,9 @@ struct mlx5_ifc_copy_action_in_bits {
 	u8         reserved_at_38[0x8];
 };
 
-union mlx5_ifc_set_action_in_add_action_in_auto_bits {
-	struct mlx5_ifc_set_action_in_bits set_action_in;
-	struct mlx5_ifc_add_action_in_bits add_action_in;
+union mlx5_ifc_set_add_copy_action_in_auto_bits {
+	struct mlx5_ifc_set_action_in_bits  set_action_in;
+	struct mlx5_ifc_add_action_in_bits  add_action_in;
 	struct mlx5_ifc_copy_action_in_bits copy_action_in;
 	u8         reserved_at_0[0x40];
 };
@@ -5743,7 +5771,7 @@ struct mlx5_ifc_alloc_modify_header_context_in_bits {
 	u8         reserved_at_68[0x10];
 	u8         num_of_actions[0x8];
 
-	union mlx5_ifc_set_action_in_add_action_in_auto_bits actions[0];
+	union mlx5_ifc_set_add_copy_action_in_auto_bits actions[];
 };
 
 struct mlx5_ifc_dealloc_modify_header_context_out_bits {
@@ -5805,7 +5833,7 @@ struct mlx5_ifc_query_cq_out_bits {
 
 	u8         reserved_at_280[0x600];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_query_cq_in_bits {
@@ -6412,7 +6440,7 @@ struct mlx5_ifc_modify_cq_in_bits {
 
 	u8         reserved_at_300[0x580];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_modify_cong_status_out_bits {
@@ -6476,7 +6504,7 @@ struct mlx5_ifc_manage_pages_out_bits {
 
 	u8         reserved_at_60[0x20];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 enum {
@@ -6498,7 +6526,7 @@ struct mlx5_ifc_manage_pages_in_bits {
 
 	u8         input_num_entries[0x20];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_mad_ifc_out_bits {
@@ -7453,7 +7481,7 @@ struct mlx5_ifc_create_xrc_srq_in_bits {
 
 	u8         reserved_at_300[0x580];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_create_tis_out_bits {
@@ -7529,7 +7557,7 @@ struct mlx5_ifc_create_srq_in_bits {
 
 	u8         reserved_at_280[0x600];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_create_sq_out_bits {
@@ -7690,7 +7718,7 @@ struct mlx5_ifc_create_qp_in_bits {
 	u8         wq_umem_valid[0x1];
 	u8         reserved_at_861[0x1f];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_create_psv_out_bits {
@@ -7761,7 +7789,7 @@ struct mlx5_ifc_create_mkey_in_bits {
 
 	u8         reserved_at_320[0x560];
 
-	u8         klm_pas_mtt[0][0x20];
+	u8         klm_pas_mtt[][0x20];
 };
 
 enum {
@@ -7894,7 +7922,7 @@ struct mlx5_ifc_create_eq_in_bits {
 
 	u8         reserved_at_3c0[0x4c0];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_create_dct_out_bits {
@@ -7951,7 +7979,7 @@ struct mlx5_ifc_create_cq_in_bits {
 	u8         cq_umem_valid[0x1];
 	u8         reserved_at_2e1[0x59f];
 
-	u8         pas[0][0x40];
+	u8         pas[][0x40];
 };
 
 struct mlx5_ifc_config_int_moderation_out_bits {
@@ -8307,7 +8335,7 @@ struct mlx5_ifc_access_register_out_bits {
 
 	u8         reserved_at_40[0x40];
 
-	u8         register_data[0][0x20];
+	u8         register_data[][0x20];
 };
 
 enum {
@@ -8327,7 +8355,7 @@ struct mlx5_ifc_access_register_in_bits {
 
 	u8         argument[0x20];
 
-	u8         register_data[0][0x20];
+	u8         register_data[][0x20];
 };
 
 struct mlx5_ifc_sltp_reg_bits {
@@ -9344,7 +9372,7 @@ struct mlx5_ifc_cmd_in_bits {
 	u8         reserved_at_20[0x10];
 	u8         op_mod[0x10];
 
-	u8         command[0][0x20];
+	u8         command[][0x20];
 };
 
 struct mlx5_ifc_cmd_if_box_bits {
@@ -9638,7 +9666,7 @@ struct mlx5_ifc_mcqi_reg_bits {
 	u8         reserved_at_a0[0x10];
 	u8         data_size[0x10];
 
-	union mlx5_ifc_mcqi_reg_data_bits data[0];
+	union mlx5_ifc_mcqi_reg_data_bits data[];
 };
 
 struct mlx5_ifc_mcc_reg_bits {
@@ -9677,7 +9705,30 @@ struct mlx5_ifc_mcda_reg_bits {
 
 	u8         reserved_at_60[0x20];
 
-	u8         data[0][0x20];
+	u8         data[][0x20];
+};
+
+enum {
+	MLX5_MFRL_REG_RESET_TYPE_FULL_CHIP = BIT(0),
+	MLX5_MFRL_REG_RESET_TYPE_NET_PORT_ALIVE = BIT(1),
+};
+
+enum {
+	MLX5_MFRL_REG_RESET_LEVEL0 = BIT(0),
+	MLX5_MFRL_REG_RESET_LEVEL3 = BIT(3),
+	MLX5_MFRL_REG_RESET_LEVEL6 = BIT(6),
+};
+
+struct mlx5_ifc_mfrl_reg_bits {
+	u8         reserved_at_0[0x20];
+
+	u8         reserved_at_20[0x2];
+	u8         pci_sync_for_fw_update_start[0x1];
+	u8         pci_sync_for_fw_update_resp[0x2];
+	u8         rst_type_sel[0x3];
+	u8         reserved_at_28[0x8];
+	u8         reset_type[0x8];
+	u8         reset_level[0x8];
 };
 
 struct mlx5_ifc_mirc_reg_bits {
@@ -9743,6 +9794,7 @@ union mlx5_ifc_ports_control_registers_document_bits {
 	struct mlx5_ifc_mcc_reg_bits mcc_reg;
 	struct mlx5_ifc_mcda_reg_bits mcda_reg;
 	struct mlx5_ifc_mirc_reg_bits mirc_reg;
+	struct mlx5_ifc_mfrl_reg_bits mfrl_reg;
 	u8         reserved_at_0[0x60e0];
 };
 
@@ -10200,7 +10252,7 @@ struct mlx5_ifc_umem_bits {
 
 	u8         num_of_mtt[0x40];
 
-	struct mlx5_ifc_mtt_bits  mtt[0];
+	struct mlx5_ifc_mtt_bits  mtt[];
 };
 
 struct mlx5_ifc_uctx_bits {
@@ -10325,7 +10377,7 @@ struct mlx5_ifc_mtrc_stdb_bits {
 	u8         reserved_at_4[0x4];
 	u8         read_size[0x18];
 	u8         start_offset[0x20];
-	u8         string_db_data[0];
+	u8         string_db_data[];
 };
 
 struct mlx5_ifc_mtrc_ctrl_bits {
@@ -10379,7 +10431,7 @@ struct mlx5_ifc_query_esw_functions_out_bits {
 	struct mlx5_ifc_host_params_context_bits host_params_context;
 
 	u8         reserved_at_280[0x180];
-	u8         host_sf_enable[0][0x40];
+	u8         host_sf_enable[][0x40];
 };
 
 struct mlx5_ifc_sf_partition_bits {
@@ -10399,7 +10451,7 @@ struct mlx5_ifc_query_sf_partitions_out_bits {
 
 	u8         reserved_at_60[0x20];
 
-	struct mlx5_ifc_sf_partition_bits sf_partition[0];
+	struct mlx5_ifc_sf_partition_bits sf_partition[];
 };
 
 struct mlx5_ifc_query_sf_partitions_in_bits {
@@ -10465,10 +10517,62 @@ struct mlx5_ifc_affiliated_event_header_bits {
 
 enum {
 	MLX5_HCA_CAP_GENERAL_OBJECT_TYPES_ENCRYPTION_KEY = BIT(0xc),
+	MLX5_HCA_CAP_GENERAL_OBJECT_TYPES_IPSEC = BIT(0x13),
 };
 
 enum {
 	MLX5_GENERAL_OBJECT_TYPES_ENCRYPTION_KEY = 0xc,
+	MLX5_GENERAL_OBJECT_TYPES_IPSEC = 0x13,
+};
+
+enum {
+	MLX5_IPSEC_OBJECT_ICV_LEN_16B,
+	MLX5_IPSEC_OBJECT_ICV_LEN_12B,
+	MLX5_IPSEC_OBJECT_ICV_LEN_8B,
+};
+
+struct mlx5_ifc_ipsec_obj_bits {
+	u8         modify_field_select[0x40];
+	u8         full_offload[0x1];
+	u8         reserved_at_41[0x1];
+	u8         esn_en[0x1];
+	u8         esn_overlap[0x1];
+	u8         reserved_at_44[0x2];
+	u8         icv_length[0x2];
+	u8         reserved_at_48[0x4];
+	u8         aso_return_reg[0x4];
+	u8         reserved_at_50[0x10];
+
+	u8         esn_msb[0x20];
+
+	u8         reserved_at_80[0x8];
+	u8         dekn[0x18];
+
+	u8         salt[0x20];
+
+	u8         implicit_iv[0x40];
+
+	u8         reserved_at_100[0x700];
+};
+
+struct mlx5_ifc_create_ipsec_obj_in_bits {
+	struct mlx5_ifc_general_obj_in_cmd_hdr_bits general_obj_in_cmd_hdr;
+	struct mlx5_ifc_ipsec_obj_bits ipsec_object;
+};
+
+enum {
+	MLX5_MODIFY_IPSEC_BITMASK_ESN_OVERLAP = BIT(0),
+	MLX5_MODIFY_IPSEC_BITMASK_ESN_MSB = BIT(1),
+};
+
+struct mlx5_ifc_query_ipsec_obj_out_bits {
+	struct mlx5_ifc_general_obj_out_cmd_hdr_bits general_obj_out_cmd_hdr;
+	struct mlx5_ifc_ipsec_obj_bits ipsec_object;
+};
+
+struct mlx5_ifc_modify_ipsec_obj_in_bits {
+	struct mlx5_ifc_general_obj_in_cmd_hdr_bits general_obj_in_cmd_hdr;
+	struct mlx5_ifc_ipsec_obj_bits ipsec_object;
 };
 
 struct mlx5_ifc_encryption_key_obj_bits {
diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h
index ae63b1ae9004..1af5e460b5f6 100644
--- a/include/linux/mlx5/qp.h
+++ b/include/linux/mlx5/qp.h
@@ -229,6 +229,11 @@ enum {
 
 enum {
 	MLX5_ETH_WQE_SVLAN              = 1 << 0,
+	MLX5_ETH_WQE_TRAILER_HDR_OUTER_IP_ASSOC = 1 << 26,
+	MLX5_ETH_WQE_TRAILER_HDR_OUTER_L4_ASSOC = 1 << 27,
+	MLX5_ETH_WQE_TRAILER_HDR_INNER_IP_ASSOC = 3 << 26,
+	MLX5_ETH_WQE_TRAILER_HDR_INNER_L4_ASSOC = 1 << 28,
+	MLX5_ETH_WQE_INSERT_TRAILER     = 1 << 30,
 	MLX5_ETH_WQE_INSERT_VLAN        = 1 << 15,
 };
 
@@ -257,6 +262,7 @@ struct mlx5_wqe_eth_seg {
 			__be16 type;
 			__be16 vlan_tci;
 		} insert;
+		__be32 trailer;
 	};
 };
 
@@ -402,7 +408,7 @@ struct mlx5_wqe_signature_seg {
 
 struct mlx5_wqe_inline_seg {
 	__be32	byte_count;
-	__be32	data[0];
+	__be32	data[];
 };
 
 enum mlx5_sig_type {
@@ -553,57 +559,8 @@ struct mlx5_qp_context {
 	u8			rsvd1[24];
 };
 
-static inline struct mlx5_core_qp *__mlx5_qp_lookup(struct mlx5_core_dev *dev, u32 qpn)
-{
-	return radix_tree_lookup(&dev->priv.qp_table.tree, qpn);
-}
-
-int mlx5_core_create_dct(struct mlx5_core_dev *dev,
-			 struct mlx5_core_dct *qp,
-			 u32 *in, int inlen,
-			 u32 *out, int outlen);
-int mlx5_core_create_qp(struct mlx5_core_dev *dev,
-			struct mlx5_core_qp *qp,
-			u32 *in,
-			int inlen);
-int mlx5_core_qp_modify(struct mlx5_core_dev *dev, u16 opcode,
-			u32 opt_param_mask, void *qpc,
-			struct mlx5_core_qp *qp);
-int mlx5_core_destroy_qp(struct mlx5_core_dev *dev,
-			 struct mlx5_core_qp *qp);
-int mlx5_core_destroy_dct(struct mlx5_core_dev *dev,
-			  struct mlx5_core_dct *dct);
-int mlx5_core_qp_query(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp,
-		       u32 *out, int outlen);
-int mlx5_core_dct_query(struct mlx5_core_dev *dev, struct mlx5_core_dct *dct,
-			u32 *out, int outlen);
-
-int mlx5_core_set_delay_drop(struct mlx5_core_dev *dev,
-			     u32 timeout_usec);
-
-int mlx5_core_xrcd_alloc(struct mlx5_core_dev *dev, u32 *xrcdn);
-int mlx5_core_xrcd_dealloc(struct mlx5_core_dev *dev, u32 xrcdn);
-void mlx5_init_qp_table(struct mlx5_core_dev *dev);
-void mlx5_cleanup_qp_table(struct mlx5_core_dev *dev);
 int mlx5_debug_qp_add(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp);
 void mlx5_debug_qp_remove(struct mlx5_core_dev *dev, struct mlx5_core_qp *qp);
-int mlx5_core_create_rq_tracked(struct mlx5_core_dev *dev, u32 *in, int inlen,
-				struct mlx5_core_qp *rq);
-void mlx5_core_destroy_rq_tracked(struct mlx5_core_dev *dev,
-				  struct mlx5_core_qp *rq);
-int mlx5_core_create_sq_tracked(struct mlx5_core_dev *dev, u32 *in, int inlen,
-				struct mlx5_core_qp *sq);
-void mlx5_core_destroy_sq_tracked(struct mlx5_core_dev *dev,
-				  struct mlx5_core_qp *sq);
-int mlx5_core_alloc_q_counter(struct mlx5_core_dev *dev, u16 *counter_id);
-int mlx5_core_dealloc_q_counter(struct mlx5_core_dev *dev, u16 counter_id);
-int mlx5_core_query_q_counter(struct mlx5_core_dev *dev, u16 counter_id,
-			      int reset, void *out, int out_size);
-
-struct mlx5_core_rsc_common *mlx5_core_res_hold(struct mlx5_core_dev *dev,
-						int res_num,
-						enum mlx5_res_type res_type);
-void mlx5_core_res_put(struct mlx5_core_rsc_common *res);
 
 static inline const char *mlx5_qp_type_str(int type)
 {
diff --git a/include/linux/mlx5/transobj.h b/include/linux/mlx5/transobj.h
index dc6b1e7cb8c4..028f442530cf 100644
--- a/include/linux/mlx5/transobj.h
+++ b/include/linux/mlx5/transobj.h
@@ -39,27 +39,20 @@ int mlx5_core_alloc_transport_domain(struct mlx5_core_dev *dev, u32 *tdn);
 void mlx5_core_dealloc_transport_domain(struct mlx5_core_dev *dev, u32 tdn);
 int mlx5_core_create_rq(struct mlx5_core_dev *dev, u32 *in, int inlen,
 			u32 *rqn);
-int mlx5_core_modify_rq(struct mlx5_core_dev *dev, u32 rqn, u32 *in, int inlen);
+int mlx5_core_modify_rq(struct mlx5_core_dev *dev, u32 rqn, u32 *in);
 void mlx5_core_destroy_rq(struct mlx5_core_dev *dev, u32 rqn);
 int mlx5_core_query_rq(struct mlx5_core_dev *dev, u32 rqn, u32 *out);
 int mlx5_core_create_sq(struct mlx5_core_dev *dev, u32 *in, int inlen,
 			u32 *sqn);
-int mlx5_core_modify_sq(struct mlx5_core_dev *dev, u32 sqn, u32 *in, int inlen);
+int mlx5_core_modify_sq(struct mlx5_core_dev *dev, u32 sqn, u32 *in);
 void mlx5_core_destroy_sq(struct mlx5_core_dev *dev, u32 sqn);
 int mlx5_core_query_sq(struct mlx5_core_dev *dev, u32 sqn, u32 *out);
 int mlx5_core_query_sq_state(struct mlx5_core_dev *dev, u32 sqn, u8 *state);
-int mlx5_core_create_tir(struct mlx5_core_dev *dev, u32 *in, int inlen,
-			 u32 *tirn);
-int mlx5_core_create_tir_out(struct mlx5_core_dev *dev,
-			     u32 *in, int inlen,
-			     u32 *out, int outlen);
-int mlx5_core_modify_tir(struct mlx5_core_dev *dev, u32 tirn, u32 *in,
-			 int inlen);
+int mlx5_core_create_tir(struct mlx5_core_dev *dev, u32 *in, u32 *tirn);
+int mlx5_core_modify_tir(struct mlx5_core_dev *dev, u32 tirn, u32 *in);
 void mlx5_core_destroy_tir(struct mlx5_core_dev *dev, u32 tirn);
-int mlx5_core_create_tis(struct mlx5_core_dev *dev, u32 *in, int inlen,
-			 u32 *tisn);
-int mlx5_core_modify_tis(struct mlx5_core_dev *dev, u32 tisn, u32 *in,
-			 int inlen);
+int mlx5_core_create_tis(struct mlx5_core_dev *dev, u32 *in, u32 *tisn);
+int mlx5_core_modify_tis(struct mlx5_core_dev *dev, u32 tisn, u32 *in);
 void mlx5_core_destroy_tis(struct mlx5_core_dev *dev, u32 tisn);
 int mlx5_core_create_rqt(struct mlx5_core_dev *dev, u32 *in, int inlen,
 			 u32 *rqtn);
diff --git a/include/linux/mlx5/vport.h b/include/linux/mlx5/vport.h
index 16060fb9b5e5..8170da1e9f70 100644
--- a/include/linux/mlx5/vport.h
+++ b/include/linux/mlx5/vport.h
@@ -127,8 +127,7 @@ int mlx5_query_vport_down_stats(struct mlx5_core_dev *mdev, u16 vport,
 				u8 other_vport, u64 *rx_discard_vport_down,
 				u64 *tx_discard_vport_down);
 int mlx5_core_query_vport_counter(struct mlx5_core_dev *dev, u8 other_vport,
-				  int vf, u8 port_num, void *out,
-				  size_t out_sz);
+				  int vf, u8 port_num, void *out);
 int mlx5_core_modify_hca_vport_context(struct mlx5_core_dev *dev,
 				       u8 other_vport, u8 port_num,
 				       int vf,
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 5a323422d783..bb8d3716bfe4 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -201,10 +201,10 @@ extern int sysctl_overcommit_memory;
 extern int sysctl_overcommit_ratio;
 extern unsigned long sysctl_overcommit_kbytes;
 
-extern int overcommit_ratio_handler(struct ctl_table *, int, void __user *,
-				    size_t *, loff_t *);
-extern int overcommit_kbytes_handler(struct ctl_table *, int, void __user *,
-				    size_t *, loff_t *);
+int overcommit_ratio_handler(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
+int overcommit_kbytes_handler(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
 
 #define nth_page(page,n) pfn_to_page(page_to_pfn((page)) + (n))
 
@@ -325,17 +325,13 @@ extern unsigned int kobjsize(const void *objp);
 #elif defined(CONFIG_SPARC64)
 # define VM_SPARC_ADI	VM_ARCH_1	/* Uses ADI tag for access control */
 # define VM_ARCH_CLEAR	VM_SPARC_ADI
+#elif defined(CONFIG_ARM64)
+# define VM_ARM64_BTI	VM_ARCH_1	/* BTI guarded page, a.k.a. GP bit */
+# define VM_ARCH_CLEAR	VM_ARM64_BTI
 #elif !defined(CONFIG_MMU)
 # define VM_MAPPED_COPY	VM_ARCH_1	/* T if mapped copy of data (nommu mmap) */
 #endif
 
-#if defined(CONFIG_X86_INTEL_MPX)
-/* MPX specific bounds table or bounds directory */
-# define VM_MPX		VM_HIGH_ARCH_4
-#else
-# define VM_MPX		VM_NONE
-#endif
-
 #ifndef VM_GROWSUP
 # define VM_GROWSUP	VM_NONE
 #endif
@@ -1050,6 +1046,7 @@ vm_fault_t finish_mkwrite_fault(struct vm_fault *vmf);
 
 static inline enum zone_type page_zonenum(const struct page *page)
 {
+	ASSERT_EXCLUSIVE_BITS(page->flags, ZONES_MASK << ZONES_PGSHIFT);
 	return (page->flags >> ZONES_PGSHIFT) & ZONES_MASK;
 }
 
@@ -1219,7 +1216,7 @@ void unpin_user_pages(struct page **pages, unsigned long npages);
  * used to track the pincount (instead using of the GUP_PIN_COUNTING_BIAS
  * scheme).
  *
- * For more information, please see Documentation/vm/pin_user_pages.rst.
+ * For more information, please see Documentation/core-api/pin_user_pages.rst.
  *
  * @page:	pointer to page to be queried.
  * @Return:	True, if it is likely that the page has been "dma-pinned".
@@ -1367,7 +1364,7 @@ static inline int cpu_pid_to_cpupid(int nid, int pid)
 
 static inline bool cpupid_pid_unset(int cpupid)
 {
-	return 1;
+	return true;
 }
 
 static inline void page_cpupid_reset_last(struct page *page)
@@ -1718,7 +1715,7 @@ struct frame_vector {
 	unsigned int nr_frames;	/* Number of frames stored in ptrs array */
 	bool got_ref;		/* Did we pin pages by getting page ref? */
 	bool is_pfns;		/* Does array contain pages or pfns? */
-	void *ptrs[0];		/* Array of pinned pfns / pages. Use
+	void *ptrs[];		/* Array of pinned pfns / pages. Use
 				 * pfns_vector_pages() or pfns_vector_pfns()
 				 * for access */
 };
@@ -2060,11 +2057,6 @@ int __pte_alloc_kernel(pmd_t *pmd);
 
 #if defined(CONFIG_MMU)
 
-/*
- * The following ifdef needed to get the 5level-fixup.h header to work.
- * Remove it when 5level-fixup.h has been removed.
- */
-#ifndef __ARCH_HAS_5LEVEL_HACK
 static inline p4d_t *p4d_alloc(struct mm_struct *mm, pgd_t *pgd,
 		unsigned long address)
 {
@@ -2078,7 +2070,6 @@ static inline pud_t *pud_alloc(struct mm_struct *mm, p4d_t *p4d,
 	return (unlikely(p4d_none(*p4d)) && __pud_alloc(mm, p4d, address)) ?
 		NULL : pud_offset(p4d, address);
 }
-#endif /* !__ARCH_HAS_5LEVEL_HACK */
 
 static inline pmd_t *pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
 {
@@ -2272,9 +2263,7 @@ static inline spinlock_t *pud_lock(struct mm_struct *mm, pud_t *pud)
 }
 
 extern void __init pagecache_init(void);
-extern void free_area_init(unsigned long * zones_size);
-extern void __init free_area_init_node(int nid, unsigned long * zones_size,
-		unsigned long zone_start_pfn, unsigned long *zholes_size);
+extern void __init free_area_init_memoryless_node(int nid);
 extern void free_initmem(void);
 
 /*
@@ -2344,34 +2333,26 @@ static inline unsigned long get_num_physpages(void)
 	return phys_pages;
 }
 
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 /*
- * With CONFIG_HAVE_MEMBLOCK_NODE_MAP set, an architecture may initialise its
- * zones, allocate the backing mem_map and account for memory holes in a more
- * architecture independent manner. This is a substitute for creating the
- * zone_sizes[] and zholes_size[] arrays and passing them to
- * free_area_init_node()
+ * Using memblock node mappings, an architecture may initialise its
+ * zones, allocate the backing mem_map and account for memory holes in an
+ * architecture independent manner.
  *
  * An architecture is expected to register range of page frames backed by
  * physical memory with memblock_add[_node]() before calling
- * free_area_init_nodes() passing in the PFN each zone ends at. At a basic
+ * free_area_init() passing in the PFN each zone ends at. At a basic
  * usage, an architecture is expected to do something like
  *
  * unsigned long max_zone_pfns[MAX_NR_ZONES] = {max_dma, max_normal_pfn,
  * 							 max_highmem_pfn};
  * for_each_valid_physical_page_range()
  * 	memblock_add_node(base, size, nid)
- * free_area_init_nodes(max_zone_pfns);
+ * free_area_init(max_zone_pfns);
  *
- * free_bootmem_with_active_regions() calls free_bootmem_node() for each
- * registered physical page range.  Similarly
  * sparse_memory_present_with_active_regions() calls memory_present() for
  * each range when SPARSEMEM is enabled.
- *
- * See mm/page_alloc.c for more information on each function exposed by
- * CONFIG_HAVE_MEMBLOCK_NODE_MAP.
  */
-extern void free_area_init_nodes(unsigned long *max_zone_pfn);
+void free_area_init(unsigned long *max_zone_pfn);
 unsigned long node_map_pfn_alignment(void);
 unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn,
 						unsigned long end_pfn);
@@ -2380,16 +2361,10 @@ extern unsigned long absent_pages_in_range(unsigned long start_pfn,
 extern void get_pfn_range_for_nid(unsigned int nid,
 			unsigned long *start_pfn, unsigned long *end_pfn);
 extern unsigned long find_min_pfn_with_active_regions(void);
-extern void free_bootmem_with_active_regions(int nid,
-						unsigned long max_low_pfn);
 extern void sparse_memory_present_with_active_regions(int nid);
 
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-
-#if !defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) && \
-    !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID)
-static inline int __early_pfn_to_nid(unsigned long pfn,
-					struct mminit_pfnnid_cache *state)
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+static inline int early_pfn_to_nid(unsigned long pfn)
 {
 	return 0;
 }
@@ -2542,7 +2517,8 @@ extern int __do_munmap(struct mm_struct *, unsigned long, size_t,
 		       struct list_head *uf, bool downgrade);
 extern int do_munmap(struct mm_struct *, unsigned long, size_t,
 		     struct list_head *uf);
-extern int do_madvise(unsigned long start, size_t len_in, int behavior);
+extern int do_madvise(struct task_struct *target_task, struct mm_struct *mm,
+		unsigned long start, size_t len_in, int behavior);
 
 static inline unsigned long
 do_mmap_pgoff(struct file *file, unsigned long addr,
@@ -2601,25 +2577,6 @@ extern vm_fault_t filemap_page_mkwrite(struct vm_fault *vmf);
 int __must_check write_one_page(struct page *page);
 void task_dirty_inc(struct task_struct *tsk);
 
-/* readahead.c */
-#define VM_READAHEAD_PAGES	(SZ_128K / PAGE_SIZE)
-
-int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
-			pgoff_t offset, unsigned long nr_to_read);
-
-void page_cache_sync_readahead(struct address_space *mapping,
-			       struct file_ra_state *ra,
-			       struct file *filp,
-			       pgoff_t offset,
-			       unsigned long size);
-
-void page_cache_async_readahead(struct address_space *mapping,
-				struct file_ra_state *ra,
-				struct file *filp,
-				struct page *pg,
-				pgoff_t offset,
-				unsigned long size);
-
 extern unsigned long stack_guard_gap;
 /* Generic expand stack which grows the stack according to GROWS{UP,DOWN} */
 extern int expand_stack(struct vm_area_struct *vma, unsigned long address);
@@ -2834,7 +2791,7 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
  * releasing pages: get_user_pages*() pages must be released via put_page(),
  * while pin_user_pages*() pages must be released via unpin_user_page().
  *
- * Please see Documentation/vm/pin_user_pages.rst for more information.
+ * Please see Documentation/core-api/pin_user_pages.rst for more information.
  */
 
 static inline int vm_fault_to_errno(vm_fault_t vm_fault, int foll_flags)
@@ -2957,8 +2914,8 @@ extern bool process_shares_mm(struct task_struct *p, struct mm_struct *mm);
 
 #ifdef CONFIG_SYSCTL
 extern int sysctl_drop_caches;
-int drop_caches_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
+int drop_caches_sysctl_handler(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
 #endif
 
 void drop_slab(void);
@@ -3140,5 +3097,7 @@ unsigned long wp_shared_mapping_range(struct address_space *mapping,
 				      pgoff_t first_index, pgoff_t nr);
 #endif
 
+extern int sysctl_nr_trim_pages;
+
 #endif /* __KERNEL__ */
 #endif /* _LINUX_MM_H */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index c318fb5b6a94..d4a50e5dc111 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -92,6 +92,9 @@ struct mmc_host_ops {
 			    int err);
 	void	(*pre_req)(struct mmc_host *host, struct mmc_request *req);
 	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+	/* Submit one request to host in atomic context. */
+	int	(*request_atomic)(struct mmc_host *host,
+				  struct mmc_request *req);
 
 	/*
 	 * Avoid calling the next three functions too often or in a "fast
diff --git a/include/linux/mmu_context.h b/include/linux/mmu_context.h
index d9a543a9e1cc..c51a84132d7c 100644
--- a/include/linux/mmu_context.h
+++ b/include/linux/mmu_context.h
@@ -4,11 +4,6 @@
 
 #include <asm/mmu_context.h>
 
-struct mm_struct;
-
-void use_mm(struct mm_struct *mm);
-void unuse_mm(struct mm_struct *mm);
-
 /* Architectures that care about IRQ state in switch_mm can override this. */
 #ifndef switch_mm_irqs_off
 # define switch_mm_irqs_off switch_mm
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 1b9de7d220fb..eff0906dde34 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -678,6 +678,8 @@ typedef struct pglist_data {
 	/*
 	 * Must be held any time you expect node_start_pfn,
 	 * node_present_pages, node_spanned_pages or nr_zones to stay constant.
+	 * Also synchronizes pgdat->first_deferred_pfn during deferred page
+	 * init.
 	 *
 	 * pgdat_resize_lock() and pgdat_resize_unlock() are provided to
 	 * manipulate node_size_lock without checking for CONFIG_MEMORY_HOTPLUG
@@ -697,13 +699,13 @@ typedef struct pglist_data {
 	struct task_struct *kswapd;	/* Protected by
 					   mem_hotplug_begin/end() */
 	int kswapd_order;
-	enum zone_type kswapd_classzone_idx;
+	enum zone_type kswapd_highest_zoneidx;
 
 	int kswapd_failures;		/* Number of 'reclaimed == 0' runs */
 
 #ifdef CONFIG_COMPACTION
 	int kcompactd_max_order;
-	enum zone_type kcompactd_classzone_idx;
+	enum zone_type kcompactd_highest_zoneidx;
 	wait_queue_head_t kcompactd_wait;
 	struct task_struct *kcompactd;
 #endif
@@ -781,15 +783,15 @@ static inline bool pgdat_is_empty(pg_data_t *pgdat)
 
 void build_all_zonelists(pg_data_t *pgdat);
 void wakeup_kswapd(struct zone *zone, gfp_t gfp_mask, int order,
-		   enum zone_type classzone_idx);
+		   enum zone_type highest_zoneidx);
 bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
-			 int classzone_idx, unsigned int alloc_flags,
+			 int highest_zoneidx, unsigned int alloc_flags,
 			 long free_pages);
 bool zone_watermark_ok(struct zone *z, unsigned int order,
-		unsigned long mark, int classzone_idx,
+		unsigned long mark, int highest_zoneidx,
 		unsigned int alloc_flags);
 bool zone_watermark_ok_safe(struct zone *z, unsigned int order,
-		unsigned long mark, int classzone_idx);
+		unsigned long mark, int highest_zoneidx);
 enum memmap_context {
 	MEMMAP_EARLY,
 	MEMMAP_HOTPLUG,
@@ -874,7 +876,7 @@ extern int movable_zone;
 #ifdef CONFIG_HIGHMEM
 static inline int zone_movable_is_highmem(void)
 {
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+#ifdef CONFIG_NEED_MULTIPLE_NODES
 	return movable_zone == ZONE_HIGHMEM;
 #else
 	return (ZONE_MOVABLE - 1) == ZONE_HIGHMEM;
@@ -909,24 +911,23 @@ static inline int is_highmem(struct zone *zone)
 
 /* These two functions are used to setup the per zone pages min values */
 struct ctl_table;
-int min_free_kbytes_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-int watermark_boost_factor_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-int watermark_scale_factor_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
+
+int min_free_kbytes_sysctl_handler(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
+int watermark_scale_factor_sysctl_handler(struct ctl_table *, int, void *,
+		size_t *, loff_t *);
 extern int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES];
-int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
+int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, void *,
+		size_t *, loff_t *);
 int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
+		void *, size_t *, loff_t *);
 int sysctl_min_unmapped_ratio_sysctl_handler(struct ctl_table *, int,
-			void __user *, size_t *, loff_t *);
+		void *, size_t *, loff_t *);
 int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *, int,
-			void __user *, size_t *, loff_t *);
-
-extern int numa_zonelist_order_handler(struct ctl_table *, int,
-			void __user *, size_t *, loff_t *);
+		void *, size_t *, loff_t *);
+int numa_zonelist_order_handler(struct ctl_table *, int,
+		void *, size_t *, loff_t *);
+extern int percpu_pagelist_fraction;
 extern char numa_zonelist_order[];
 #define NUMA_ZONELIST_ORDER_LEN	16
 
@@ -1078,15 +1079,6 @@ static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
 #include <asm/sparsemem.h>
 #endif
 
-#if !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID) && \
-	!defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP)
-static inline unsigned long early_pfn_to_nid(unsigned long pfn)
-{
-	BUILD_BUG_ON(IS_ENABLED(CONFIG_NUMA));
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_FLATMEM
 #define pfn_to_nid(pfn)		(0)
 #endif
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 4c2ddd0941a7..c97195fe8658 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -434,7 +434,7 @@ struct virtio_device_id {
  * For Hyper-V devices we use the device guid as the id.
  */
 struct hv_vmbus_device_id {
-	uuid_le guid;
+	guid_t guid;
 	kernel_ulong_t driver_data;	/* Data private to the driver */
 };
 
@@ -532,6 +532,8 @@ enum dmi_field {
 	DMI_BIOS_VENDOR,
 	DMI_BIOS_VERSION,
 	DMI_BIOS_DATE,
+	DMI_BIOS_RELEASE,
+	DMI_EC_FIRMWARE_RELEASE,
 	DMI_SYS_VENDOR,
 	DMI_PRODUCT_NAME,
 	DMI_PRODUCT_VERSION,
diff --git a/include/linux/mpage.h b/include/linux/mpage.h
index 001f1fcf9836..f4f5e90a6844 100644
--- a/include/linux/mpage.h
+++ b/include/linux/mpage.h
@@ -13,9 +13,9 @@
 #ifdef CONFIG_BLOCK
 
 struct writeback_control;
+struct readahead_control;
 
-int mpage_readpages(struct address_space *mapping, struct list_head *pages,
-				unsigned nr_pages, get_block_t get_block);
+void mpage_readahead(struct readahead_control *, get_block_t get_block);
 int mpage_readpage(struct page *page, get_block_t get_block);
 int mpage_writepages(struct address_space *mapping,
 		struct writeback_control *wbc, get_block_t get_block);
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index c98a21108688..fd1ecb821106 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -138,7 +138,7 @@ struct cfi_ident {
 	uint16_t InterfaceDesc;
 	uint16_t MaxBufWriteSize;
 	uint8_t  NumEraseRegions;
-	uint32_t EraseRegionInfo[0]; /* Not host ordered */
+	uint32_t EraseRegionInfo[]; /* Not host ordered */
 } __packed;
 
 /* Extended Query Structure for both PRI and ALT */
@@ -165,7 +165,7 @@ struct cfi_pri_intelext {
 	uint16_t ProtRegAddr;
 	uint8_t  FactProtRegSize;
 	uint8_t  UserProtRegSize;
-	uint8_t  extra[0];
+	uint8_t  extra[];
 } __packed;
 
 struct cfi_intelext_otpinfo {
@@ -286,7 +286,7 @@ struct cfi_private {
 	map_word sector_erase_cmd;
 	unsigned long chipshift; /* Because they're of the same type */
 	const char *im_name;	 /* inter_module name for cmdset_setup */
-	struct flchip chips[0];  /* per-chip data structure for each chip */
+	struct flchip chips[];  /* per-chip data structure for each chip */
 };
 
 uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
diff --git a/include/linux/mtd/qinfo.h b/include/linux/mtd/qinfo.h
index df5b9fddea16..2e3f43788d48 100644
--- a/include/linux/mtd/qinfo.h
+++ b/include/linux/mtd/qinfo.h
@@ -24,7 +24,7 @@ struct lpddr_private {
 	struct qinfo_chip *qinfo;
 	int numchips;
 	unsigned long chipshift;
-	struct flchip chips[0];
+	struct flchip chips[];
 };
 
 /* qinfo_query_info structure contains request information for
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 1e2af0ec1f03..bebff2729c18 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -20,6 +20,7 @@
  */
 
 /* Flash opcodes. */
+#define SPINOR_OP_WRDI		0x04	/* Write disable */
 #define SPINOR_OP_WREN		0x06	/* Write enable */
 #define SPINOR_OP_RDSR		0x05	/* Read status register */
 #define SPINOR_OP_WRSR		0x01	/* Write status register 1 byte */
@@ -80,7 +81,6 @@
 
 /* Used for SST flashes only. */
 #define SPINOR_OP_BP		0x02	/* Byte program */
-#define SPINOR_OP_WRDI		0x04	/* Write disable */
 #define SPINOR_OP_AAI_WP	0xad	/* Auto address increment word program */
 
 /* Used for S3AN flashes only */
@@ -327,15 +327,15 @@ struct spi_nor_manufacturer;
 struct spi_nor_flash_parameter;
 
 /**
- * struct spi_nor - Structure for defining a the SPI NOR layer
- * @mtd:		point to a mtd_info structure
+ * struct spi_nor - Structure for defining the SPI NOR layer
+ * @mtd:		an mtd_info structure
  * @lock:		the lock for the read/write/erase/lock/unlock operations
- * @dev:		point to a spi device, or a spi nor controller device.
- * @spimem:		point to the spi mem device
+ * @dev:		pointer to an SPI device or an SPI NOR controller device
+ * @spimem:		pointer to the SPI memory device
  * @bouncebuf:		bounce buffer used when the buffer passed by the MTD
  *                      layer is not DMA-able
  * @bouncebuf_size:	size of the bounce buffer
- * @info:		spi-nor part JDEC MFR id and other info
+ * @info:		SPI NOR part JEDEC MFR ID and other info
  * @manufacturer:	spi-nor manufacturer
  * @page_size:		the page size of the SPI NOR
  * @addr_width:		number of address bytes
@@ -347,14 +347,14 @@ struct spi_nor_flash_parameter;
  * @flags:		flag options for the current SPI-NOR (SNOR_F_*)
  * @read_proto:		the SPI protocol for read operations
  * @write_proto:	the SPI protocol for write operations
- * @reg_proto		the SPI protocol for read_reg/write_reg/erase operations
+ * @reg_proto:		the SPI protocol for read_reg/write_reg/erase operations
  * @controller_ops:	SPI NOR controller driver specific operations.
  * @params:		[FLASH-SPECIFIC] SPI-NOR flash parameters and settings.
  *                      The structure includes legacy flash parameters and
  *                      settings that can be overwritten by the spi_nor_fixups
  *                      hooks, or dynamically when parsing the SFDP tables.
  * @dirmap:		pointers to struct spi_mem_dirmap_desc for reads/writes.
- * @priv:		the private data
+ * @priv:		pointer to the private data
  */
 struct spi_nor {
 	struct mtd_info		mtd;
diff --git a/include/linux/net.h b/include/linux/net.h
index 6451425e828f..7b7b21a81736 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -264,7 +264,8 @@ do {								\
 	net_ratelimited_function(pr_warn, fmt, ##__VA_ARGS__)
 #define net_info_ratelimited(fmt, ...)				\
 	net_ratelimited_function(pr_info, fmt, ##__VA_ARGS__)
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 #define net_dbg_ratelimited(fmt, ...)					\
 do {									\
 	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);			\
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 130a668049ab..3ebb3290d983 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -288,6 +288,7 @@ enum netdev_state_t {
 	__LINK_STATE_NOCARRIER,
 	__LINK_STATE_LINKWATCH_PENDING,
 	__LINK_STATE_DORMANT,
+	__LINK_STATE_TESTING,
 };
 
 
@@ -328,6 +329,7 @@ struct napi_struct {
 
 	unsigned long		state;
 	int			weight;
+	int			defer_hard_irqs_count;
 	unsigned long		gro_bitmask;
 	int			(*poll)(struct napi_struct *, int);
 #ifdef CONFIG_NETPOLL
@@ -1994,6 +1996,7 @@ struct net_device {
 
 	struct bpf_prog __rcu	*xdp_prog;
 	unsigned long		gro_flush_timeout;
+	int			napi_defer_hard_irqs;
 	rx_handler_func_t __rcu	*rx_handler;
 	void __rcu		*rx_handler_data;
 
@@ -3907,6 +3910,46 @@ static inline bool netif_dormant(const struct net_device *dev)
 }
 
 
+/**
+ *	netif_testing_on - mark device as under test.
+ *	@dev: network device
+ *
+ * Mark device as under test (as per RFC2863).
+ *
+ * The testing state indicates that some test(s) must be performed on
+ * the interface. After completion, of the test, the interface state
+ * will change to up, dormant, or down, as appropriate.
+ */
+static inline void netif_testing_on(struct net_device *dev)
+{
+	if (!test_and_set_bit(__LINK_STATE_TESTING, &dev->state))
+		linkwatch_fire_event(dev);
+}
+
+/**
+ *	netif_testing_off - set device as not under test.
+ *	@dev: network device
+ *
+ * Device is not in testing state.
+ */
+static inline void netif_testing_off(struct net_device *dev)
+{
+	if (test_and_clear_bit(__LINK_STATE_TESTING, &dev->state))
+		linkwatch_fire_event(dev);
+}
+
+/**
+ *	netif_testing - test if device is under test
+ *	@dev: network device
+ *
+ * Check if device is under test
+ */
+static inline bool netif_testing(const struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_TESTING, &dev->state);
+}
+
+
 /**
  *	netif_oper_up - test if device is operational
  *	@dev: network device
@@ -4868,7 +4911,8 @@ do {								\
 #define MODULE_ALIAS_NETDEV(device) \
 	MODULE_ALIAS("netdev-" device)
 
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 #define netdev_dbg(__dev, format, args...)			\
 do {								\
 	dynamic_netdev_dbg(__dev, format, ##args);		\
@@ -4938,7 +4982,8 @@ do {								\
 #define netif_info(priv, type, dev, fmt, args...)		\
 	netif_level(info, priv, type, dev, fmt, ##args)
 
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 #define netif_dbg(priv, type, netdev, format, args...)		\
 do {								\
 	if (netif_msg_##type(priv))				\
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index 82d8fb422092..7c4b63561035 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -38,7 +38,7 @@ struct nfs4_ace {
 
 struct nfs4_acl {
 	uint32_t	naces;
-	struct nfs4_ace	aces[0];
+	struct nfs4_ace	aces[];
 };
 
 #define NFS4_MAXLABELLEN	2048
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 440230488025..6aad9b0a5062 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1227,7 +1227,7 @@ struct nfs4_secinfo4 {
 
 struct nfs4_secinfo_flavors {
 	unsigned int		num_flavors;
-	struct nfs4_secinfo4	flavors[0];
+	struct nfs4_secinfo4	flavors[];
 };
 
 struct nfs4_secinfo_arg {
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 9003e29cde46..0c2a1d915453 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -84,6 +84,7 @@ static inline void reset_hung_task_detector(void) { }
 #if defined(CONFIG_HARDLOCKUP_DETECTOR)
 extern void hardlockup_detector_disable(void);
 extern unsigned int hardlockup_panic;
+extern atomic_t hardlockup_detected;
 #else
 static inline void hardlockup_detector_disable(void) {}
 #endif
@@ -202,16 +203,11 @@ static inline void watchdog_update_hrtimer_threshold(u64 period) { }
 #endif
 
 struct ctl_table;
-extern int proc_watchdog(struct ctl_table *, int ,
-			 void __user *, size_t *, loff_t *);
-extern int proc_nmi_watchdog(struct ctl_table *, int ,
-			     void __user *, size_t *, loff_t *);
-extern int proc_soft_watchdog(struct ctl_table *, int ,
-			      void __user *, size_t *, loff_t *);
-extern int proc_watchdog_thresh(struct ctl_table *, int ,
-				void __user *, size_t *, loff_t *);
-extern int proc_watchdog_cpumask(struct ctl_table *, int,
-				 void __user *, size_t *, loff_t *);
+int proc_watchdog(struct ctl_table *, int, void *, size_t *, loff_t *);
+int proc_nmi_watchdog(struct ctl_table *, int , void *, size_t *, loff_t *);
+int proc_soft_watchdog(struct ctl_table *, int , void *, size_t *, loff_t *);
+int proc_watchdog_thresh(struct ctl_table *, int , void *, size_t *, loff_t *);
+int proc_watchdog_cpumask(struct ctl_table *, int, void *, size_t *, loff_t *);
 
 #ifdef CONFIG_HAVE_ACPI_APEI_NMI
 #include <asm/nmi.h>
diff --git a/include/linux/ntb.h b/include/linux/ntb.h
index 8c13538aeffe..a07252f78770 100644
--- a/include/linux/ntb.h
+++ b/include/linux/ntb.h
@@ -478,7 +478,7 @@ void ntb_unregister_client(struct ntb_client *client);
 int ntb_register_device(struct ntb_dev *ntb);
 
 /**
- * ntb_register_device() - unregister a ntb device
+ * ntb_unregister_device() - unregister a ntb device
  * @ntb:	NTB device context.
  *
  * The device will be removed from the list of ntb devices.  If the ntb device
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 3d5189f46cb1..6ee80a44ed4f 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -1177,7 +1177,7 @@ struct nvmf_disc_rsp_page_hdr {
 	__le64		numrec;
 	__le16		recfmt;
 	__u8		resv14[1006];
-	struct nvmf_disc_rsp_page_entry entries[0];
+	struct nvmf_disc_rsp_page_entry entries[];
 };
 
 enum {
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index 491a2b7e77c1..0f61a4ac6bcf 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -30,7 +30,9 @@ extern struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
 extern int of_phy_register_fixed_link(struct device_node *np);
 extern void of_phy_deregister_fixed_link(struct device_node *np);
 extern bool of_phy_is_fixed_link(struct device_node *np);
-
+extern int of_mdiobus_phy_device_register(struct mii_bus *mdio,
+				     struct phy_device *phy,
+				     struct device_node *child, u32 addr);
 
 static inline int of_mdio_parse_addr(struct device *dev,
 				     const struct device_node *np)
@@ -118,6 +120,13 @@ static inline bool of_phy_is_fixed_link(struct device_node *np)
 {
 	return false;
 }
+
+static inline int of_mdiobus_phy_device_register(struct mii_bus *mdio,
+					    struct phy_device *phy,
+					    struct device_node *child, u32 addr)
+{
+	return -ENOSYS;
+}
 #endif
 
 
diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h
index 60f541912ccf..a1b427ac291b 100644
--- a/include/linux/of_reserved_mem.h
+++ b/include/linux/of_reserved_mem.h
@@ -33,6 +33,9 @@ typedef int (*reservedmem_of_init_fn)(struct reserved_mem *rmem);
 
 int of_reserved_mem_device_init_by_idx(struct device *dev,
 				       struct device_node *np, int idx);
+int of_reserved_mem_device_init_by_name(struct device *dev,
+					struct device_node *np,
+					const char *name);
 void of_reserved_mem_device_release(struct device *dev);
 
 void fdt_init_reserved_mem(void);
@@ -45,6 +48,14 @@ static inline int of_reserved_mem_device_init_by_idx(struct device *dev,
 {
 	return -ENOSYS;
 }
+
+static inline int of_reserved_mem_device_init_by_name(struct device *dev,
+						      struct device_node *np,
+						      const char *name)
+{
+	return -ENOSYS;
+}
+
 static inline void of_reserved_mem_device_release(struct device *pdev) { }
 
 static inline void fdt_init_reserved_mem(void) { }
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index a8f7bd8ea1c6..c6348c50136f 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -51,7 +51,10 @@ static inline void mapping_set_error(struct address_space *mapping, int error)
 		return;
 
 	/* Record in wb_err for checkers using errseq_t based tracking */
-	filemap_set_wb_err(mapping, error);
+	__filemap_set_wb_err(mapping, error);
+
+	/* Record it in superblock */
+	errseq_set(&mapping->host->i_sb->s_wb_err, error);
 
 	/* Record it in flags for now, for legacy callers */
 	if (error == -ENOSPC)
@@ -615,6 +618,17 @@ int replace_page_cache_page(struct page *old, struct page *new, gfp_t gfp_mask);
 void delete_from_page_cache_batch(struct address_space *mapping,
 				  struct pagevec *pvec);
 
+#define VM_READAHEAD_PAGES	(SZ_128K / PAGE_SIZE)
+
+void page_cache_sync_readahead(struct address_space *, struct file_ra_state *,
+		struct file *, pgoff_t index, unsigned long req_count);
+void page_cache_async_readahead(struct address_space *, struct file_ra_state *,
+		struct file *, struct page *, pgoff_t index,
+		unsigned long req_count);
+void page_cache_readahead_unbounded(struct address_space *, struct file *,
+		pgoff_t index, unsigned long nr_to_read,
+		unsigned long lookahead_count);
+
 /*
  * Like add_to_page_cache_locked, but used to add newly allocated pages:
  * the page is new, so we can just run __SetPageLocked() against it.
@@ -631,6 +645,146 @@ static inline int add_to_page_cache(struct page *page,
 	return error;
 }
 
+/**
+ * struct readahead_control - Describes a readahead request.
+ *
+ * A readahead request is for consecutive pages.  Filesystems which
+ * implement the ->readahead method should call readahead_page() or
+ * readahead_page_batch() in a loop and attempt to start I/O against
+ * each page in the request.
+ *
+ * Most of the fields in this struct are private and should be accessed
+ * by the functions below.
+ *
+ * @file: The file, used primarily by network filesystems for authentication.
+ *	  May be NULL if invoked internally by the filesystem.
+ * @mapping: Readahead this filesystem object.
+ */
+struct readahead_control {
+	struct file *file;
+	struct address_space *mapping;
+/* private: use the readahead_* accessors instead */
+	pgoff_t _index;
+	unsigned int _nr_pages;
+	unsigned int _batch_count;
+};
+
+/**
+ * readahead_page - Get the next page to read.
+ * @rac: The current readahead request.
+ *
+ * Context: The page is locked and has an elevated refcount.  The caller
+ * should decreases the refcount once the page has been submitted for I/O
+ * and unlock the page once all I/O to that page has completed.
+ * Return: A pointer to the next page, or %NULL if we are done.
+ */
+static inline struct page *readahead_page(struct readahead_control *rac)
+{
+	struct page *page;
+
+	BUG_ON(rac->_batch_count > rac->_nr_pages);
+	rac->_nr_pages -= rac->_batch_count;
+	rac->_index += rac->_batch_count;
+
+	if (!rac->_nr_pages) {
+		rac->_batch_count = 0;
+		return NULL;
+	}
+
+	page = xa_load(&rac->mapping->i_pages, rac->_index);
+	VM_BUG_ON_PAGE(!PageLocked(page), page);
+	rac->_batch_count = hpage_nr_pages(page);
+
+	return page;
+}
+
+static inline unsigned int __readahead_batch(struct readahead_control *rac,
+		struct page **array, unsigned int array_sz)
+{
+	unsigned int i = 0;
+	XA_STATE(xas, &rac->mapping->i_pages, 0);
+	struct page *page;
+
+	BUG_ON(rac->_batch_count > rac->_nr_pages);
+	rac->_nr_pages -= rac->_batch_count;
+	rac->_index += rac->_batch_count;
+	rac->_batch_count = 0;
+
+	xas_set(&xas, rac->_index);
+	rcu_read_lock();
+	xas_for_each(&xas, page, rac->_index + rac->_nr_pages - 1) {
+		VM_BUG_ON_PAGE(!PageLocked(page), page);
+		VM_BUG_ON_PAGE(PageTail(page), page);
+		array[i++] = page;
+		rac->_batch_count += hpage_nr_pages(page);
+
+		/*
+		 * The page cache isn't using multi-index entries yet,
+		 * so the xas cursor needs to be manually moved to the
+		 * next index.  This can be removed once the page cache
+		 * is converted.
+		 */
+		if (PageHead(page))
+			xas_set(&xas, rac->_index + rac->_batch_count);
+
+		if (i == array_sz)
+			break;
+	}
+	rcu_read_unlock();
+
+	return i;
+}
+
+/**
+ * readahead_page_batch - Get a batch of pages to read.
+ * @rac: The current readahead request.
+ * @array: An array of pointers to struct page.
+ *
+ * Context: The pages are locked and have an elevated refcount.  The caller
+ * should decreases the refcount once the page has been submitted for I/O
+ * and unlock the page once all I/O to that page has completed.
+ * Return: The number of pages placed in the array.  0 indicates the request
+ * is complete.
+ */
+#define readahead_page_batch(rac, array)				\
+	__readahead_batch(rac, array, ARRAY_SIZE(array))
+
+/**
+ * readahead_pos - The byte offset into the file of this readahead request.
+ * @rac: The readahead request.
+ */
+static inline loff_t readahead_pos(struct readahead_control *rac)
+{
+	return (loff_t)rac->_index * PAGE_SIZE;
+}
+
+/**
+ * readahead_length - The number of bytes in this readahead request.
+ * @rac: The readahead request.
+ */
+static inline loff_t readahead_length(struct readahead_control *rac)
+{
+	return (loff_t)rac->_nr_pages * PAGE_SIZE;
+}
+
+/**
+ * readahead_index - The index of the first page in this readahead request.
+ * @rac: The readahead request.
+ */
+static inline pgoff_t readahead_index(struct readahead_control *rac)
+{
+	return rac->_index;
+}
+
+/**
+ * readahead_count - The number of pages in this readahead request.
+ * @rac: The readahead request.
+ */
+static inline unsigned int readahead_count(struct readahead_control *rac)
+{
+	return rac->_nr_pages;
+}
+
 static inline unsigned long dir_pages(struct inode *inode)
 {
 	return (unsigned long)(inode->i_size + PAGE_SIZE - 1) >>
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 13932ce8b37b..1fb508c19e83 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -325,18 +325,10 @@ struct pardev_cb {
 	unsigned int flags;
 };
 
-/* parport_register_device declares that a device is connected to a
-   port, and tells the kernel all it needs to know.
-   - pf is the preemption function (may be NULL for no callback)
-   - kf is the wake-up function (may be NULL for no callback)
-   - irq_func is the interrupt handler (may be NULL for no interrupts)
-   - handle is a user pointer that gets handed to callback functions.  */
-struct pardevice *parport_register_device(struct parport *port, 
-			  const char *name,
-			  int (*pf)(void *), void (*kf)(void *),
-			  void (*irq_func)(void *), 
-			  int flags, void *handle);
-
+/*
+ * parport_register_dev_model declares that a device is connected to a
+ * port, and tells the kernel all it needs to know.
+ */
 struct pardevice *
 parport_register_dev_model(struct parport *port, const char *name,
 			   const struct pardev_cb *par_dev_cb, int cnt);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 2d155bfb8fbf..11c98875538a 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -125,10 +125,4 @@ static inline void acpi_pci_add_bus(struct pci_bus *bus) { }
 static inline void acpi_pci_remove_bus(struct pci_bus *bus) { }
 #endif	/* CONFIG_ACPI */
 
-#ifdef CONFIG_ACPI_APEI
-extern bool aer_acpi_firmware_first(void);
-#else
-static inline bool aer_acpi_firmware_first(void) { return false; }
-#endif
-
 #endif	/* _PCI_ACPI_H_ */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 83ce1cdf5676..0453ee458ab1 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -279,7 +279,7 @@ struct pci_cap_saved_data {
 	u16		cap_nr;
 	bool		cap_extended;
 	unsigned int	size;
-	u32		data[0];
+	u32		data[];
 };
 
 struct pci_cap_saved_state {
@@ -532,7 +532,7 @@ struct pci_host_bridge {
 			resource_size_t start,
 			resource_size_t size,
 			resource_size_t align);
-	unsigned long	private[0] ____cacheline_aligned;
+	unsigned long	private[] ____cacheline_aligned;
 };
 
 #define	to_pci_host_bridge(n) container_of(n, struct pci_host_bridge, dev)
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 9c3e7619c929..e958d8314db4 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -60,8 +60,8 @@ struct perf_guest_info_callbacks {
 #include <asm/local.h>
 
 struct perf_callchain_entry {
-	__u64				nr;
-	__u64				ip[0]; /* /proc/sys/kernel/perf_event_max_stack */
+	__u64	nr;
+	__u64	ip[]; /* /proc/sys/kernel/perf_event_max_stack */
 };
 
 struct perf_callchain_entry_ctx {
@@ -113,7 +113,7 @@ struct perf_raw_record {
 struct perf_branch_stack {
 	__u64				nr;
 	__u64				hw_idx;
-	struct perf_branch_entry	entries[0];
+	struct perf_branch_entry	entries[];
 };
 
 struct task_struct;
@@ -1280,15 +1280,12 @@ extern int sysctl_perf_cpu_time_max_percent;
 
 extern void perf_sample_event_took(u64 sample_len_ns);
 
-extern int perf_proc_update_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-extern int perf_cpu_time_max_percent_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-
+int perf_proc_update_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
+int perf_cpu_time_max_percent_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
 int perf_event_max_stack_handler(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp, loff_t *ppos);
+		void *buffer, size_t *lenp, loff_t *ppos);
 
 /* Access to perf_event_open(2) syscall. */
 #define PERF_SECURITY_OPEN		0
@@ -1305,7 +1302,7 @@ static inline int perf_is_paranoid(void)
 
 static inline int perf_allow_kernel(struct perf_event_attr *attr)
 {
-	if (sysctl_perf_event_paranoid > 1 && !capable(CAP_SYS_ADMIN))
+	if (sysctl_perf_event_paranoid > 1 && !perfmon_capable())
 		return -EACCES;
 
 	return security_perf_event_open(attr, PERF_SECURITY_KERNEL);
@@ -1313,7 +1310,7 @@ static inline int perf_allow_kernel(struct perf_event_attr *attr)
 
 static inline int perf_allow_cpu(struct perf_event_attr *attr)
 {
-	if (sysctl_perf_event_paranoid > 0 && !capable(CAP_SYS_ADMIN))
+	if (sysctl_perf_event_paranoid > 0 && !perfmon_capable())
 		return -EACCES;
 
 	return security_perf_event_open(attr, PERF_SECURITY_CPU);
@@ -1321,7 +1318,7 @@ static inline int perf_allow_cpu(struct perf_event_attr *attr)
 
 static inline int perf_allow_tracepoint(struct perf_event_attr *attr)
 {
-	if (sysctl_perf_event_paranoid > -1 && !capable(CAP_SYS_ADMIN))
+	if (sysctl_perf_event_paranoid > -1 && !perfmon_capable())
 		return -EPERM;
 
 	return security_perf_event_open(attr, PERF_SECURITY_TRACEPOINT);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2432ca463ddc..e2bfb9240587 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -241,6 +241,9 @@ struct mii_bus {
 	int (*reset)(struct mii_bus *bus);
 	struct mdio_bus_stats stats[PHY_MAX_ADDR];
 
+	unsigned int is_managed:1;	/* is device-managed */
+	unsigned int is_managed_registered:1;
+
 	/*
 	 * A lock to ensure that only one thing can read/write
 	 * the MDIO bus at a time
@@ -286,6 +289,20 @@ static inline struct mii_bus *mdiobus_alloc(void)
 
 int __mdiobus_register(struct mii_bus *bus, struct module *owner);
 #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE)
+static inline int devm_mdiobus_register(struct mii_bus *bus)
+{
+	int ret;
+
+	if (!bus->is_managed)
+		return -EPERM;
+
+	ret = mdiobus_register(bus);
+	if (!ret)
+		bus->is_managed_registered = 1;
+
+	return ret;
+}
+
 void mdiobus_unregister(struct mii_bus *bus);
 void mdiobus_free(struct mii_bus *bus);
 struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv);
@@ -1234,10 +1251,6 @@ static inline int genphy_config_aneg(struct phy_device *phydev)
 	return __genphy_config_aneg(phydev, false);
 }
 
-static inline int genphy_no_soft_reset(struct phy_device *phydev)
-{
-	return 0;
-}
 static inline int genphy_no_ack_interrupt(struct phy_device *phydev)
 {
 	return 0;
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 3f8d37ec5503..cc5b452a184e 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -67,6 +67,9 @@ struct phylink_config {
 	struct device *dev;
 	enum phylink_op_type type;
 	bool pcs_poll;
+	bool poll_fixed_state;
+	void (*get_fixed_state)(struct phylink_config *config,
+				struct phylink_link_state *state);
 };
 
 /**
@@ -366,9 +369,6 @@ void phylink_destroy(struct phylink *);
 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
 void phylink_disconnect_phy(struct phylink *);
-int phylink_fixed_state_cb(struct phylink *,
-			   void (*cb)(struct net_device *dev,
-				      struct phylink_link_state *));
 
 void phylink_mac_change(struct phylink *, bool up);
 
diff --git a/include/linux/pid.h b/include/linux/pid.h
index cc896f0fc4e3..86e0e7cb7872 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -77,6 +77,7 @@ extern const struct file_operations pidfd_fops;
 struct file;
 
 extern struct pid *pidfd_pid(const struct file *file);
+struct pid *pidfd_get_pid(unsigned int fd);
 
 static inline struct pid *get_pid(struct pid *pid)
 {
@@ -102,12 +103,16 @@ extern void attach_pid(struct task_struct *task, enum pid_type);
 extern void detach_pid(struct task_struct *task, enum pid_type);
 extern void change_pid(struct task_struct *task, enum pid_type,
 			struct pid *pid);
+extern void exchange_tids(struct task_struct *task, struct task_struct *old);
 extern void transfer_pid(struct task_struct *old, struct task_struct *new,
 			 enum pid_type);
 
 struct pid_namespace;
 extern struct pid_namespace init_pid_ns;
 
+extern int pid_max;
+extern int pid_max_min, pid_max_max;
+
 /*
  * look up a PID in the hash table. Must be called with the tasklist_lock
  * or rcu_read_lock() held.
diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index 4956e362e55e..5a5cb45ac57e 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -17,12 +17,6 @@
 
 struct fs_pin;
 
-enum { /* definitions for pid_namespace's hide_pid field */
-	HIDEPID_OFF	  = 0,
-	HIDEPID_NO_ACCESS = 1,
-	HIDEPID_INVISIBLE = 2,
-};
-
 struct pid_namespace {
 	struct kref kref;
 	struct idr idr;
@@ -32,17 +26,11 @@ struct pid_namespace {
 	struct kmem_cache *pid_cachep;
 	unsigned int level;
 	struct pid_namespace *parent;
-#ifdef CONFIG_PROC_FS
-	struct dentry *proc_self;
-	struct dentry *proc_thread_self;
-#endif
 #ifdef CONFIG_BSD_PROCESS_ACCT
 	struct fs_pin *bacct;
 #endif
 	struct user_namespace *user_ns;
 	struct ucounts *ucounts;
-	kgid_t pid_gid;
-	int hide_pid;
 	int reboot;	/* group exit code if this pidns was rebooted */
 	struct ns_common ns;
 } __randomize_layout;
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index ae58fad7f1e0..6626f511de6f 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -8,6 +8,10 @@
 #define PIPE_BUF_FLAG_ATOMIC	0x02	/* was atomically mapped */
 #define PIPE_BUF_FLAG_GIFT	0x04	/* page is a gift */
 #define PIPE_BUF_FLAG_PACKET	0x08	/* read() as a packet */
+#define PIPE_BUF_FLAG_WHOLE	0x10	/* read() must return entire buffer or error */
+#ifdef CONFIG_WATCH_QUEUE
+#define PIPE_BUF_FLAG_LOSS	0x20	/* Message loss happened after this buffer */
+#endif
 
 /**
  *	struct pipe_buffer - a linux kernel pipe buffer
@@ -33,8 +37,10 @@ struct pipe_buffer {
  *	@wr_wait: writer wait point in case of full pipe
  *	@head: The point of buffer production
  *	@tail: The point of buffer consumption
+ *	@note_loss: The next read() should insert a data-lost message
  *	@max_usage: The maximum number of slots that may be used in the ring
  *	@ring_size: total number of buffers (should be a power of 2)
+ *	@nr_accounted: The amount this pipe accounts for in user->pipe_bufs
  *	@tmp_page: cached released page
  *	@readers: number of current readers of this pipe
  *	@writers: number of current writers of this pipe
@@ -45,6 +51,7 @@ struct pipe_buffer {
  *	@fasync_writers: writer side fasync
  *	@bufs: the circular array of pipe buffers
  *	@user: the user who created this pipe
+ *	@watch_queue: If this pipe is a watch_queue, this is the stuff for that
  **/
 struct pipe_inode_info {
 	struct mutex mutex;
@@ -53,6 +60,10 @@ struct pipe_inode_info {
 	unsigned int tail;
 	unsigned int max_usage;
 	unsigned int ring_size;
+#ifdef CONFIG_WATCH_QUEUE
+	bool note_loss;
+#endif
+	unsigned int nr_accounted;
 	unsigned int readers;
 	unsigned int writers;
 	unsigned int files;
@@ -63,6 +74,9 @@ struct pipe_inode_info {
 	struct fasync_struct *fasync_writers;
 	struct pipe_buffer *bufs;
 	struct user_struct *user;
+#ifdef CONFIG_WATCH_QUEUE
+	struct watch_queue *watch_queue;
+#endif
 };
 
 /*
@@ -237,9 +251,20 @@ void pipe_buf_mark_unmergeable(struct pipe_buffer *buf);
 
 extern const struct pipe_buf_operations nosteal_pipe_buf_ops;
 
+#ifdef CONFIG_WATCH_QUEUE
+unsigned long account_pipe_buffers(struct user_struct *user,
+				   unsigned long old, unsigned long new);
+bool too_many_pipe_buffers_soft(unsigned long user_bufs);
+bool too_many_pipe_buffers_hard(unsigned long user_bufs);
+bool pipe_is_unprivileged_user(void);
+#endif
+
 /* for F_SETPIPE_SZ and F_GETPIPE_SZ */
+#ifdef CONFIG_WATCH_QUEUE
+int pipe_resize_ring(struct pipe_inode_info *pipe, unsigned int nr_slots);
+#endif
 long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
-struct pipe_inode_info *get_pipe_info(struct file *file);
+struct pipe_inode_info *get_pipe_info(struct file *file, bool for_splice);
 
 int create_pipe_files(struct file **, int);
 unsigned int round_pipe_size(unsigned long size);
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index 69210881ebac..451885c697cc 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -5065,7 +5065,7 @@ struct ec_response_pd_log {
 	uint8_t type;       /* event type : see PD_EVENT_xx below */
 	uint8_t size_port;  /* [7:5] port number [4:0] payload size in bytes */
 	uint16_t data;      /* type-defined data payload */
-	uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */
+	uint8_t payload[]; /* optional additional data payload: 0..16 bytes */
 } __ec_align4;
 
 /* The timestamp is the microsecond counter shifted to get about a ms. */
@@ -5691,7 +5691,7 @@ struct ec_response_fp_encryption_status {
 
 struct ec_response_tp_frame_info {
 	uint32_t n_frames;
-	uint32_t frame_sizes[0];
+	uint32_t frame_sizes[];
 } __ec_align4;
 
 /* Create a snapshot of current frame readings */
diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
index 383243326676..7f03e02c48cd 100644
--- a/include/linux/platform_data/cros_ec_proto.h
+++ b/include/linux/platform_data/cros_ec_proto.h
@@ -69,7 +69,7 @@ struct cros_ec_command {
 	uint32_t outsize;
 	uint32_t insize;
 	uint32_t result;
-	uint8_t data[0];
+	uint8_t data[];
 };
 
 /**
diff --git a/include/linux/platform_data/itco_wdt.h b/include/linux/platform_data/itco_wdt.h
index 2ccdce6a4e27..45d860cac2b0 100644
--- a/include/linux/platform_data/itco_wdt.h
+++ b/include/linux/platform_data/itco_wdt.h
@@ -12,13 +12,16 @@
 #define ICH_RES_MEM_OFF		2
 #define ICH_RES_MEM_GCS_PMC	0
 
+/**
+ * struct itco_wdt_platform_data - iTCO_wdt platform data
+ * @name: Name of the platform
+ * @version: iTCO version
+ * @no_reboot_use_pmc: Use PMC BXT API to set and clear NO_REBOOT bit
+ */
 struct itco_wdt_platform_data {
 	char name[32];
 	unsigned int version;
-	/* private data to be passed to update_no_reboot_bit API */
-	void *no_reboot_priv;
-	/* pointer for platform specific no reboot update function */
-	int (*update_no_reboot_bit)(void *priv, bool set);
+	bool no_reboot_use_pmc;
 };
 
 #endif /* _ITCO_WDT_H_ */
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index bdc35753ef7c..77a2aada106d 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -25,6 +25,7 @@ struct platform_device {
 	bool		id_auto;
 	struct device	dev;
 	u64		platform_dma_mask;
+	struct device_dma_parameters dma_parms;
 	u32		num_resources;
 	struct resource	*resource;
 
diff --git a/include/linux/pm.h b/include/linux/pm.h
index e057d1fa2469..121c104a4090 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -544,31 +544,17 @@ struct pm_subsys_data {
  * These flags can be set by device drivers at the probe time.  They need not be
  * cleared by the drivers as the driver core will take care of that.
  *
- * NEVER_SKIP: Do not skip all system suspend/resume callbacks for the device.
- * SMART_PREPARE: Check the return value of the driver's ->prepare callback.
- * SMART_SUSPEND: No need to resume the device from runtime suspend.
- * LEAVE_SUSPENDED: Avoid resuming the device during system resume if possible.
- *
- * Setting SMART_PREPARE instructs bus types and PM domains which may want
- * system suspend/resume callbacks to be skipped for the device to return 0 from
- * their ->prepare callbacks if the driver's ->prepare callback returns 0 (in
- * other words, the system suspend/resume callbacks can only be skipped for the
- * device if its driver doesn't object against that).  This flag has no effect
- * if NEVER_SKIP is set.
- *
- * Setting SMART_SUSPEND instructs bus types and PM domains which may want to
- * runtime resume the device upfront during system suspend that doing so is not
- * necessary from the driver's perspective.  It also may cause them to skip
- * invocations of the ->suspend_late and ->suspend_noirq callbacks provided by
- * the driver if they decide to leave the device in runtime suspend.
- *
- * Setting LEAVE_SUSPENDED informs the PM core and middle-layer code that the
- * driver prefers the device to be left in suspend after system resume.
+ * NO_DIRECT_COMPLETE: Do not apply direct-complete optimization to the device.
+ * SMART_PREPARE: Take the driver ->prepare callback return value into account.
+ * SMART_SUSPEND: Avoid resuming the device from runtime suspend.
+ * MAY_SKIP_RESUME: Allow driver "noirq" and "early" callbacks to be skipped.
+ *
+ * See Documentation/driver-api/pm/devices.rst for details.
  */
-#define DPM_FLAG_NEVER_SKIP		BIT(0)
+#define DPM_FLAG_NO_DIRECT_COMPLETE	BIT(0)
 #define DPM_FLAG_SMART_PREPARE		BIT(1)
 #define DPM_FLAG_SMART_SUSPEND		BIT(2)
-#define DPM_FLAG_LEAVE_SUSPENDED	BIT(3)
+#define DPM_FLAG_MAY_SKIP_RESUME	BIT(3)
 
 struct dev_pm_info {
 	pm_message_t		power_state;
@@ -758,8 +744,8 @@ extern int pm_generic_poweroff_late(struct device *dev);
 extern int pm_generic_poweroff(struct device *dev);
 extern void pm_generic_complete(struct device *dev);
 
-extern bool dev_pm_may_skip_resume(struct device *dev);
-extern bool dev_pm_smart_suspend_and_suspended(struct device *dev);
+extern bool dev_pm_skip_resume(struct device *dev);
+extern bool dev_pm_skip_suspend(struct device *dev);
 
 #else /* !CONFIG_PM_SLEEP */
 
diff --git a/include/linux/printk.h b/include/linux/printk.h
index e061635e0409..38beb97e7018 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -189,7 +189,7 @@ extern int printk_delay_msec;
 extern int dmesg_restrict;
 
 extern int
-devkmsg_sysctl_set_loglvl(struct ctl_table *table, int write, void __user *buf,
+devkmsg_sysctl_set_loglvl(struct ctl_table *table, int write, void *buf,
 			  size_t *lenp, loff_t *ppos);
 
 extern void wake_up_klogd(void);
@@ -279,39 +279,116 @@ static inline void printk_safe_flush_on_panic(void)
 
 extern int kptr_restrict;
 
+/**
+ * pr_fmt - used by the pr_*() macros to generate the printk format string
+ * @fmt: format string passed from a pr_*() macro
+ *
+ * This macro can be used to generate a unified format string for pr_*()
+ * macros. A common use is to prefix all pr_*() messages in a file with a common
+ * string. For example, defining this at the top of a source file:
+ *
+ *        #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+ *
+ * would prefix all pr_info, pr_emerg... messages in the file with the module
+ * name.
+ */
 #ifndef pr_fmt
 #define pr_fmt(fmt) fmt
 #endif
 
-/*
- * These can be used to print at the various log levels.
- * All of these will print unconditionally, although note that pr_debug()
- * and other debug macros are compiled out unless either DEBUG is defined
- * or CONFIG_DYNAMIC_DEBUG is set.
+/**
+ * pr_emerg - Print an emergency-level message
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to a printk with KERN_EMERG loglevel. It uses pr_fmt() to
+ * generate the format string.
  */
 #define pr_emerg(fmt, ...) \
 	printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+/**
+ * pr_alert - Print an alert-level message
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to a printk with KERN_ALERT loglevel. It uses pr_fmt() to
+ * generate the format string.
+ */
 #define pr_alert(fmt, ...) \
 	printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+/**
+ * pr_crit - Print a critical-level message
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to a printk with KERN_CRIT loglevel. It uses pr_fmt() to
+ * generate the format string.
+ */
 #define pr_crit(fmt, ...) \
 	printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+/**
+ * pr_err - Print an error-level message
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to a printk with KERN_ERR loglevel. It uses pr_fmt() to
+ * generate the format string.
+ */
 #define pr_err(fmt, ...) \
 	printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+/**
+ * pr_warn - Print a warning-level message
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to a printk with KERN_WARNING loglevel. It uses pr_fmt()
+ * to generate the format string.
+ */
 #define pr_warn(fmt, ...) \
 	printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+/**
+ * pr_notice - Print a notice-level message
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to a printk with KERN_NOTICE loglevel. It uses pr_fmt() to
+ * generate the format string.
+ */
 #define pr_notice(fmt, ...) \
 	printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+/**
+ * pr_info - Print an info-level message
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to a printk with KERN_INFO loglevel. It uses pr_fmt() to
+ * generate the format string.
+ */
 #define pr_info(fmt, ...) \
 	printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-/*
- * Like KERN_CONT, pr_cont() should only be used when continuing
- * a line with no newline ('\n') enclosed. Otherwise it defaults
- * back to KERN_DEFAULT.
+
+/**
+ * pr_cont - Continues a previous log message in the same line.
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to a printk with KERN_CONT loglevel. It should only be
+ * used when continuing a log message with no newline ('\n') enclosed. Otherwise
+ * it defaults back to KERN_DEFAULT loglevel.
  */
 #define pr_cont(fmt, ...) \
 	printk(KERN_CONT fmt, ##__VA_ARGS__)
 
-/* pr_devel() should produce zero code unless DEBUG is defined */
+/**
+ * pr_devel - Print a debug-level message conditionally
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to a printk with KERN_DEBUG loglevel if DEBUG is
+ * defined. Otherwise it does nothing.
+ *
+ * It uses pr_fmt() to generate the format string.
+ */
 #ifdef DEBUG
 #define pr_devel(fmt, ...) \
 	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
@@ -322,11 +399,23 @@ extern int kptr_restrict;
 
 
 /* If you are writing a driver, please use dev_dbg instead */
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 #include <linux/dynamic_debug.h>
 
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) \
+/**
+ * pr_debug - Print a debug-level message conditionally
+ * @fmt: format string
+ * @...: arguments for the format string
+ *
+ * This macro expands to dynamic_pr_debug() if CONFIG_DYNAMIC_DEBUG is
+ * set. Otherwise, if DEBUG is defined, it's equivalent to a printk with
+ * KERN_DEBUG loglevel. If DEBUG is not defined it does nothing.
+ *
+ * It uses pr_fmt() to generate the format string (dynamic_pr_debug() uses
+ * pr_fmt() internally).
+ */
+#define pr_debug(fmt, ...)			\
 	dynamic_pr_debug(fmt, ##__VA_ARGS__)
 #elif defined(DEBUG)
 #define pr_debug(fmt, ...) \
@@ -448,7 +537,8 @@ extern int kptr_restrict;
 #endif
 
 /* If you are writing a driver, please use dev_dbg instead */
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 /* descriptor check is first to prevent flooding with "callbacks suppressed" */
 #define pr_debug_ratelimited(fmt, ...)					\
 do {									\
@@ -495,7 +585,8 @@ static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
 
 #endif
 
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 #define print_hex_dump_debug(prefix_str, prefix_type, rowsize,	\
 			     groupsize, buf, len, ascii)	\
 	dynamic_hex_dump(prefix_str, prefix_type, rowsize,	\
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 45c05fd9c99d..2cb424e6f36a 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -42,6 +42,34 @@ struct proc_ops {
 	unsigned long (*proc_get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
 } __randomize_layout;
 
+/* definitions for hide_pid field */
+enum proc_hidepid {
+	HIDEPID_OFF	  = 0,
+	HIDEPID_NO_ACCESS = 1,
+	HIDEPID_INVISIBLE = 2,
+	HIDEPID_NOT_PTRACEABLE = 4, /* Limit pids to only ptraceable pids */
+};
+
+/* definitions for proc mount option pidonly */
+enum proc_pidonly {
+	PROC_PIDONLY_OFF = 0,
+	PROC_PIDONLY_ON  = 1,
+};
+
+struct proc_fs_info {
+	struct pid_namespace *pid_ns;
+	struct dentry *proc_self;        /* For /proc/self */
+	struct dentry *proc_thread_self; /* For /proc/thread-self */
+	kgid_t pid_gid;
+	enum proc_hidepid hide_pid;
+	enum proc_pidonly pidonly;
+};
+
+static inline struct proc_fs_info *proc_sb_info(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
 #ifdef CONFIG_PROC_FS
 
 typedef int (*proc_write_t)(struct file *, char *, size_t);
@@ -176,7 +204,7 @@ int open_related_ns(struct ns_common *ns,
 /* get the associated pid namespace for a file in procfs */
 static inline struct pid_namespace *proc_pid_ns(const struct inode *inode)
 {
-	return inode->i_sb->s_fs_info;
+	return proc_sb_info(inode->i_sb)->pid_ns;
 }
 
 #endif /* _LINUX_PROC_FS_H */
diff --git a/include/linux/property.h b/include/linux/property.h
index d86de017c689..c7b5f3db36aa 100644
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -440,6 +440,9 @@ software_node_find_by_name(const struct software_node *parent,
 int software_node_register_nodes(const struct software_node *nodes);
 void software_node_unregister_nodes(const struct software_node *nodes);
 
+int software_node_register_node_group(const struct software_node **node_group);
+void software_node_unregister_node_group(const struct software_node **node_group);
+
 int software_node_register(const struct software_node *node);
 
 int software_node_notify(struct device *dev, unsigned long action);
diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h
index 8f29e0d8a7b3..c4956374a444 100644
--- a/include/linux/qed/qed_if.h
+++ b/include/linux/qed/qed_if.h
@@ -817,6 +817,7 @@ struct qed_common_cb_ops {
 	void	(*dcbx_aen)(void *dev, struct qed_dcbx_get *get, u32 mib_type);
 	void (*get_generic_tlv_data)(void *dev, struct qed_generic_tlvs *data);
 	void (*get_protocol_tlv_data)(void *dev, void *data);
+	void (*bw_update)(void *dev);
 };
 
 struct qed_selftest_ops {
diff --git a/include/linux/ras.h b/include/linux/ras.h
index 7c3debb47c87..1f4048bf2674 100644
--- a/include/linux/ras.h
+++ b/include/linux/ras.h
@@ -17,12 +17,7 @@ static inline int ras_add_daemon_trace(void) { return 0; }
 #endif
 
 #ifdef CONFIG_RAS_CEC
-void __init cec_init(void);
 int __init parse_cec_param(char *str);
-int cec_add_elem(u64 pfn);
-#else
-static inline void __init cec_init(void)	{ }
-static inline int cec_add_elem(u64 pfn)		{ return -ENODEV; }
 #endif
 
 #ifdef CONFIG_RAS
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
index 1fd61a9af45c..d7db17996322 100644
--- a/include/linux/rbtree.h
+++ b/include/linux/rbtree.h
@@ -11,7 +11,7 @@
   I know it's not the cleaner way,  but in C (not in C++) to get
   performances and genericity...
 
-  See Documentation/rbtree.txt for documentation and samples.
+  See Documentation/core-api/rbtree.rst for documentation and samples.
 */
 
 #ifndef	_LINUX_RBTREE_H
diff --git a/include/linux/rbtree_augmented.h b/include/linux/rbtree_augmented.h
index 724b0d036b57..d1c53e9d8c75 100644
--- a/include/linux/rbtree_augmented.h
+++ b/include/linux/rbtree_augmented.h
@@ -21,7 +21,7 @@
  * rb_insert_augmented() and rb_erase_augmented() are intended to be public.
  * The rest are implementation details you are not expected to depend on.
  *
- * See Documentation/rbtree.txt for documentation and samples.
+ * See Documentation/core-api/rbtree.rst for documentation and samples.
  */
 
 struct rb_augment_callbacks {
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index 8214cdc715f2..2ebd112f86f7 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -248,6 +248,8 @@ static inline void __list_splice_init_rcu(struct list_head *list,
 	 */
 
 	sync();
+	ASSERT_EXCLUSIVE_ACCESS(*first);
+	ASSERT_EXCLUSIVE_ACCESS(*last);
 
 	/*
 	 * Readers are finished with the source list, so perform splice.
@@ -371,7 +373,7 @@ static inline void list_splice_tail_init_rcu(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_head within the struct.
- * @cond...:	optional lockdep expression if called from non-RCU protection.
+ * @cond:	optional lockdep expression if called from non-RCU protection.
  *
  * This list-traversal primitive may safely run concurrently with
  * the _rcu list-mutation primitives such as list_add_rcu()
@@ -506,6 +508,27 @@ static inline void hlist_replace_rcu(struct hlist_node *old,
 	WRITE_ONCE(old->pprev, LIST_POISON2);
 }
 
+/**
+ * hlists_swap_heads_rcu - swap the lists the hlist heads point to
+ * @left:  The hlist head on the left
+ * @right: The hlist head on the right
+ *
+ * The lists start out as [@left  ][node1 ... ] and
+                          [@right ][node2 ... ]
+ * The lists end up as    [@left  ][node2 ... ]
+ *                        [@right ][node1 ... ]
+ */
+static inline void hlists_swap_heads_rcu(struct hlist_head *left, struct hlist_head *right)
+{
+	struct hlist_node *node1 = left->first;
+	struct hlist_node *node2 = right->first;
+
+	rcu_assign_pointer(left->first, node2);
+	rcu_assign_pointer(right->first, node1);
+	WRITE_ONCE(node2->pprev, &left->first);
+	WRITE_ONCE(node1->pprev, &right->first);
+}
+
 /*
  * return the first or the next element in an RCU protected hlist
  */
@@ -646,7 +669,7 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
- * @cond...:	optional lockdep expression if called from non-RCU protection.
+ * @cond:	optional lockdep expression if called from non-RCU protection.
  *
  * This list-traversal primitive may safely run concurrently with
  * the _rcu list-mutation primitives such as hlist_add_head_rcu()
diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h
index 9670b54b484a..ff3e94779e73 100644
--- a/include/linux/rculist_nulls.h
+++ b/include/linux/rculist_nulls.h
@@ -162,7 +162,7 @@ static inline void hlist_nulls_add_fake(struct hlist_nulls_node *n)
  * The barrier() is needed to make sure compiler doesn't cache first element [1],
  * as this loop can be restarted [2]
  * [1] Documentation/core-api/atomic_ops.rst around line 114
- * [2] Documentation/RCU/rculist_nulls.txt around line 146
+ * [2] Documentation/RCU/rculist_nulls.rst around line 146
  */
 #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member)			\
 	for (({barrier();}),							\
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 2678a37c3169..659cbfa7581a 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -37,6 +37,7 @@
 /* Exported common interfaces */
 void call_rcu(struct rcu_head *head, rcu_callback_t func);
 void rcu_barrier_tasks(void);
+void rcu_barrier_tasks_rude(void);
 void synchronize_rcu(void);
 
 #ifdef CONFIG_PREEMPT_RCU
@@ -129,25 +130,57 @@ static inline void rcu_init_nohz(void) { }
  * Note a quasi-voluntary context switch for RCU-tasks's benefit.
  * This is a macro rather than an inline function to avoid #include hell.
  */
-#ifdef CONFIG_TASKS_RCU
-#define rcu_tasks_qs(t) \
-	do { \
-		if (READ_ONCE((t)->rcu_tasks_holdout)) \
-			WRITE_ONCE((t)->rcu_tasks_holdout, false); \
+#ifdef CONFIG_TASKS_RCU_GENERIC
+
+# ifdef CONFIG_TASKS_RCU
+# define rcu_tasks_classic_qs(t, preempt)				\
+	do {								\
+		if (!(preempt) && READ_ONCE((t)->rcu_tasks_holdout))	\
+			WRITE_ONCE((t)->rcu_tasks_holdout, false);	\
 	} while (0)
-#define rcu_note_voluntary_context_switch(t) rcu_tasks_qs(t)
 void call_rcu_tasks(struct rcu_head *head, rcu_callback_t func);
 void synchronize_rcu_tasks(void);
+# else
+# define rcu_tasks_classic_qs(t, preempt) do { } while (0)
+# define call_rcu_tasks call_rcu
+# define synchronize_rcu_tasks synchronize_rcu
+# endif
+
+# ifdef CONFIG_TASKS_RCU_TRACE
+# define rcu_tasks_trace_qs(t)						\
+	do {								\
+		if (!likely(READ_ONCE((t)->trc_reader_checked)) &&	\
+		    !unlikely(READ_ONCE((t)->trc_reader_nesting))) {	\
+			smp_store_release(&(t)->trc_reader_checked, true); \
+			smp_mb(); /* Readers partitioned by store. */	\
+		}							\
+	} while (0)
+# else
+# define rcu_tasks_trace_qs(t) do { } while (0)
+# endif
+
+#define rcu_tasks_qs(t, preempt)					\
+do {									\
+	rcu_tasks_classic_qs((t), (preempt));				\
+	rcu_tasks_trace_qs((t));					\
+} while (0)
+
+# ifdef CONFIG_TASKS_RUDE_RCU
+void call_rcu_tasks_rude(struct rcu_head *head, rcu_callback_t func);
+void synchronize_rcu_tasks_rude(void);
+# endif
+
+#define rcu_note_voluntary_context_switch(t) rcu_tasks_qs(t, false)
 void exit_tasks_rcu_start(void);
 void exit_tasks_rcu_finish(void);
-#else /* #ifdef CONFIG_TASKS_RCU */
-#define rcu_tasks_qs(t)	do { } while (0)
+#else /* #ifdef CONFIG_TASKS_RCU_GENERIC */
+#define rcu_tasks_qs(t, preempt) do { } while (0)
 #define rcu_note_voluntary_context_switch(t) do { } while (0)
 #define call_rcu_tasks call_rcu
 #define synchronize_rcu_tasks synchronize_rcu
 static inline void exit_tasks_rcu_start(void) { }
 static inline void exit_tasks_rcu_finish(void) { }
-#endif /* #else #ifdef CONFIG_TASKS_RCU */
+#endif /* #else #ifdef CONFIG_TASKS_RCU_GENERIC */
 
 /**
  * cond_resched_tasks_rcu_qs - Report potential quiescent states to RCU
@@ -158,7 +191,7 @@ static inline void exit_tasks_rcu_finish(void) { }
  */
 #define cond_resched_tasks_rcu_qs() \
 do { \
-	rcu_tasks_qs(current); \
+	rcu_tasks_qs(current, false); \
 	cond_resched(); \
 } while (0)
 
diff --git a/include/linux/rcupdate_trace.h b/include/linux/rcupdate_trace.h
new file mode 100644
index 000000000000..4c25a41f8b27
--- /dev/null
+++ b/include/linux/rcupdate_trace.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Read-Copy Update mechanism for mutual exclusion, adapted for tracing.
+ *
+ * Copyright (C) 2020 Paul E. McKenney.
+ */
+
+#ifndef __LINUX_RCUPDATE_TRACE_H
+#define __LINUX_RCUPDATE_TRACE_H
+
+#include <linux/sched.h>
+#include <linux/rcupdate.h>
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+
+extern struct lockdep_map rcu_trace_lock_map;
+
+static inline int rcu_read_lock_trace_held(void)
+{
+	return lock_is_held(&rcu_trace_lock_map);
+}
+
+#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+static inline int rcu_read_lock_trace_held(void)
+{
+	return 1;
+}
+
+#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+#ifdef CONFIG_TASKS_TRACE_RCU
+
+void rcu_read_unlock_trace_special(struct task_struct *t, int nesting);
+
+/**
+ * rcu_read_lock_trace - mark beginning of RCU-trace read-side critical section
+ *
+ * When synchronize_rcu_trace() is invoked by one task, then that task
+ * is guaranteed to block until all other tasks exit their read-side
+ * critical sections.  Similarly, if call_rcu_trace() is invoked on one
+ * task while other tasks are within RCU read-side critical sections,
+ * invocation of the corresponding RCU callback is deferred until after
+ * the all the other tasks exit their critical sections.
+ *
+ * For more details, please see the documentation for rcu_read_lock().
+ */
+static inline void rcu_read_lock_trace(void)
+{
+	struct task_struct *t = current;
+
+	WRITE_ONCE(t->trc_reader_nesting, READ_ONCE(t->trc_reader_nesting) + 1);
+	if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB) &&
+	    t->trc_reader_special.b.need_mb)
+		smp_mb(); // Pairs with update-side barriers
+	rcu_lock_acquire(&rcu_trace_lock_map);
+}
+
+/**
+ * rcu_read_unlock_trace - mark end of RCU-trace read-side critical section
+ *
+ * Pairs with a preceding call to rcu_read_lock_trace(), and nesting is
+ * allowed.  Invoking a rcu_read_unlock_trace() when there is no matching
+ * rcu_read_lock_trace() is verboten, and will result in lockdep complaints.
+ *
+ * For more details, please see the documentation for rcu_read_unlock().
+ */
+static inline void rcu_read_unlock_trace(void)
+{
+	int nesting;
+	struct task_struct *t = current;
+
+	rcu_lock_release(&rcu_trace_lock_map);
+	nesting = READ_ONCE(t->trc_reader_nesting) - 1;
+	if (likely(!READ_ONCE(t->trc_reader_special.s)) || nesting) {
+		WRITE_ONCE(t->trc_reader_nesting, nesting);
+		return;  // We assume shallow reader nesting.
+	}
+	rcu_read_unlock_trace_special(t, nesting);
+}
+
+void call_rcu_tasks_trace(struct rcu_head *rhp, rcu_callback_t func);
+void synchronize_rcu_tasks_trace(void);
+void rcu_barrier_tasks_trace(void);
+
+#endif /* #ifdef CONFIG_TASKS_TRACE_RCU */
+
+#endif /* __LINUX_RCUPDATE_TRACE_H */
diff --git a/include/linux/rcupdate_wait.h b/include/linux/rcupdate_wait.h
index c0578ba23c1a..699b938358bf 100644
--- a/include/linux/rcupdate_wait.h
+++ b/include/linux/rcupdate_wait.h
@@ -31,4 +31,23 @@ do {									\
 
 #define wait_rcu_gp(...) _wait_rcu_gp(false, __VA_ARGS__)
 
+/**
+ * synchronize_rcu_mult - Wait concurrently for multiple grace periods
+ * @...: List of call_rcu() functions for different grace periods to wait on
+ *
+ * This macro waits concurrently for multiple types of RCU grace periods.
+ * For example, synchronize_rcu_mult(call_rcu, call_rcu_tasks) would wait
+ * on concurrent RCU and RCU-tasks grace periods.  Waiting on a given SRCU
+ * domain requires you to write a wrapper function for that SRCU domain's
+ * call_srcu() function, with this wrapper supplying the pointer to the
+ * corresponding srcu_struct.
+ *
+ * The first argument tells Tiny RCU's _wait_rcu_gp() not to
+ * bother waiting for RCU.  The reason for this is because anywhere
+ * synchronize_rcu_mult() can be called is automatically already a full
+ * grace period.
+ */
+#define synchronize_rcu_mult(...) \
+	_wait_rcu_gp(IS_ENABLED(CONFIG_TINY_RCU), __VA_ARGS__)
+
 #endif /* _LINUX_SCHED_RCUPDATE_WAIT_H */
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index 045c28b71f4f..3465ba704a11 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -49,7 +49,7 @@ static inline void rcu_softirq_qs(void)
 #define rcu_note_context_switch(preempt) \
 	do { \
 		rcu_qs(); \
-		rcu_tasks_qs(current); \
+		rcu_tasks_qs(current, (preempt)); \
 	} while (0)
 
 static inline int rcu_needs_cpu(u64 basemono, u64 *nextevt)
@@ -87,6 +87,7 @@ static inline bool rcu_inkernel_boot_has_ended(void) { return true; }
 static inline bool rcu_is_watching(void) { return true; }
 static inline void rcu_momentary_dyntick_idle(void) { }
 static inline void kfree_rcu_scheduler_running(void) { }
+static inline bool rcu_gp_might_be_stalled(void) { return false; }
 
 /* Avoid RCU read-side critical sections leaking across. */
 static inline void rcu_all_qs(void) { barrier(); }
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 45f3f66bb04d..fbc26274af4d 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -39,6 +39,7 @@ void rcu_barrier(void);
 bool rcu_eqs_special_set(int cpu);
 void rcu_momentary_dyntick_idle(void);
 void kfree_rcu_scheduler_running(void);
+bool rcu_gp_might_be_stalled(void);
 unsigned long get_state_synchronize_rcu(void);
 void cond_synchronize_rcu(unsigned long oldstate);
 
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 40b07168fd8e..4c4fbe4d41a6 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -17,10 +17,12 @@
 #include <linux/err.h>
 #include <linux/bug.h>
 #include <linux/lockdep.h>
+#include <linux/iopoll.h>
 
 struct module;
 struct clk;
 struct device;
+struct device_node;
 struct i2c_client;
 struct i3c_device;
 struct irq_domain;
@@ -71,6 +73,13 @@ struct reg_sequence {
 	unsigned int delay_us;
 };
 
+#define REG_SEQ(_reg, _def, _delay_us) {		\
+				.reg = _reg,		\
+				.def = _def,		\
+				.delay_us = _delay_us,	\
+				}
+#define REG_SEQ0(_reg, _def)	REG_SEQ(_reg, _def, 0)
+
 #define	regmap_update_bits(map, reg, mask, val) \
 	regmap_update_bits_base(map, reg, mask, val, NULL, false, false)
 #define	regmap_update_bits_async(map, reg, mask, val)\
@@ -122,26 +131,10 @@ struct reg_sequence {
  */
 #define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \
 ({ \
-	u64 __timeout_us = (timeout_us); \
-	unsigned long __sleep_us = (sleep_us); \
-	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
-	int __ret; \
-	might_sleep_if(__sleep_us); \
-	for (;;) { \
-		__ret = regmap_read((map), (addr), &(val)); \
-		if (__ret) \
-			break; \
-		if (cond) \
-			break; \
-		if ((__timeout_us) && \
-		    ktime_compare(ktime_get(), __timeout) > 0) { \
-			__ret = regmap_read((map), (addr), &(val)); \
-			break; \
-		} \
-		if (__sleep_us) \
-			usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
-	} \
-	__ret ?: ((cond) ? 0 : -ETIMEDOUT); \
+	int __ret, __tmp; \
+	__tmp = read_poll_timeout(regmap_read, __ret, __ret || (cond), \
+			sleep_us, timeout_us, false, (map), (addr), &(val)); \
+	__ret ?: __tmp; \
 })
 
 /**
@@ -209,25 +202,10 @@ struct reg_sequence {
  */
 #define regmap_field_read_poll_timeout(field, val, cond, sleep_us, timeout_us) \
 ({ \
-	u64 __timeout_us = (timeout_us); \
-	unsigned long __sleep_us = (sleep_us); \
-	ktime_t timeout = ktime_add_us(ktime_get(), __timeout_us); \
-	int pollret; \
-	might_sleep_if(__sleep_us); \
-	for (;;) { \
-		pollret = regmap_field_read((field), &(val)); \
-		if (pollret) \
-			break; \
-		if (cond) \
-			break; \
-		if (__timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
-			pollret = regmap_field_read((field), &(val)); \
-			break; \
-		} \
-		if (__sleep_us) \
-			usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
-	} \
-	pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
+	int __ret, __tmp; \
+	__tmp = read_poll_timeout(regmap_field_read, __ret, __ret || (cond), \
+			sleep_us, timeout_us, false, (field), &(val)); \
+	__ret ?: __tmp; \
 })
 
 #ifdef CONFIG_REGMAP
@@ -1310,12 +1288,21 @@ struct regmap_irq_chip_data;
 int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 			int irq_base, const struct regmap_irq_chip *chip,
 			struct regmap_irq_chip_data **data);
+int regmap_add_irq_chip_np(struct device_node *np, struct regmap *map, int irq,
+			   int irq_flags, int irq_base,
+			   const struct regmap_irq_chip *chip,
+			   struct regmap_irq_chip_data **data);
 void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
 
 int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
 			     int irq_flags, int irq_base,
 			     const struct regmap_irq_chip *chip,
 			     struct regmap_irq_chip_data **data);
+int devm_regmap_add_irq_chip_np(struct device *dev, struct device_node *np,
+				struct regmap *map, int irq, int irq_flags,
+				int irq_base,
+				const struct regmap_irq_chip *chip,
+				struct regmap_irq_chip_data **data);
 void devm_regmap_del_irq_chip(struct device *dev, int irq,
 			      struct regmap_irq_chip_data *data);
 
diff --git a/include/linux/relay.h b/include/linux/relay.h
index c759f96e39c1..e13a333e7c37 100644
--- a/include/linux/relay.h
+++ b/include/linux/relay.h
@@ -141,7 +141,7 @@ struct rchan_callbacks
 	 * cause relay_open() to create a single global buffer rather
 	 * than the default set of per-cpu buffers.
 	 *
-	 * See Documentation/filesystems/relay.txt for more info.
+	 * See Documentation/filesystems/relay.rst for more info.
 	 */
 	struct dentry *(*create_buf_file)(const char *filename,
 					  struct dentry *parent,
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 9c07d7958c53..e7b7bab8b235 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -73,7 +73,7 @@ struct resource_table {
 	u32 ver;
 	u32 num;
 	u32 reserved[2];
-	u32 offset[0];
+	u32 offset[];
 } __packed;
 
 /**
@@ -87,7 +87,7 @@ struct resource_table {
  */
 struct fw_rsc_hdr {
 	u32 type;
-	u8 data[0];
+	u8 data[];
 } __packed;
 
 /**
@@ -306,7 +306,7 @@ struct fw_rsc_vdev {
 	u8 status;
 	u8 num_of_vrings;
 	u8 reserved[2];
-	struct fw_rsc_vdev_vring vring[0];
+	struct fw_rsc_vdev_vring vring[];
 } __packed;
 
 struct rproc;
@@ -355,6 +355,8 @@ enum rsc_handling_status {
 
 /**
  * struct rproc_ops - platform-specific device handlers
+ * @prepare:	prepare device for code loading
+ * @unprepare:	unprepare device after stop
  * @start:	power on the device and boot it
  * @stop:	power off the device
  * @kick:	kick a virtqueue (virtqueue id given as a parameter)
@@ -373,6 +375,8 @@ enum rsc_handling_status {
  *		panic at least the returned number of milliseconds
  */
 struct rproc_ops {
+	int (*prepare)(struct rproc *rproc);
+	int (*unprepare)(struct rproc *rproc);
 	int (*start)(struct rproc *rproc);
 	int (*stop)(struct rproc *rproc);
 	void (*kick)(struct rproc *rproc, int vqid);
@@ -489,7 +493,7 @@ struct rproc {
 	struct list_head node;
 	struct iommu_domain *domain;
 	const char *name;
-	char *firmware;
+	const char *firmware;
 	void *priv;
 	struct rproc_ops *ops;
 	struct device dev;
@@ -518,6 +522,7 @@ struct rproc {
 	struct list_head dump_segments;
 	int nb_vdev;
 	u8 elf_class;
+	u16 elf_machine;
 };
 
 /**
@@ -599,6 +604,11 @@ int rproc_add(struct rproc *rproc);
 int rproc_del(struct rproc *rproc);
 void rproc_free(struct rproc *rproc);
 
+struct rproc *devm_rproc_alloc(struct device *dev, const char *name,
+			       const struct rproc_ops *ops,
+			       const char *firmware, int len);
+int devm_rproc_add(struct device *dev, struct rproc *rproc);
+
 void rproc_add_carveout(struct rproc *rproc, struct rproc_mem_entry *mem);
 
 struct rproc_mem_entry *
@@ -622,6 +632,7 @@ int rproc_coredump_add_custom_segment(struct rproc *rproc,
 						     struct rproc_dump_segment *segment,
 						     void *dest),
 				      void *priv);
+int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine);
 
 static inline struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
 {
diff --git a/include/linux/rpmsg/qcom_glink.h b/include/linux/rpmsg/qcom_glink.h
index 96e26d94719f..daded9fddf36 100644
--- a/include/linux/rpmsg/qcom_glink.h
+++ b/include/linux/rpmsg/qcom_glink.h
@@ -12,6 +12,7 @@ struct qcom_glink;
 struct qcom_glink *qcom_glink_smem_register(struct device *parent,
 					    struct device_node *node);
 void qcom_glink_smem_unregister(struct qcom_glink *glink);
+void qcom_glink_ssr_notify(const char *ssr_name);
 
 #else
 
@@ -23,7 +24,7 @@ qcom_glink_smem_register(struct device *parent,
 }
 
 static inline void qcom_glink_smem_unregister(struct qcom_glink *glink) {}
-
+static inline void qcom_glink_ssr_notify(const char *ssr_name) {}
 #endif
 
 #endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4418f5cb8324..36306c7d2afc 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -31,6 +31,7 @@
 #include <linux/task_io_accounting.h>
 #include <linux/posix-timers.h>
 #include <linux/rseq.h>
+#include <linux/kcsan.h>
 
 /* task_struct member predeclarations (sorted alphabetically): */
 struct audit_context;
@@ -613,7 +614,7 @@ union rcu_special {
 		u8			blocked;
 		u8			need_qs;
 		u8			exp_hint; /* Hint for performance. */
-		u8			deferred_qs;
+		u8			need_mb; /* Readers need smp_mb(). */
 	} b; /* Bits. */
 	u32 s; /* Set of bits. */
 };
@@ -724,6 +725,14 @@ struct task_struct {
 	struct list_head		rcu_tasks_holdout_list;
 #endif /* #ifdef CONFIG_TASKS_RCU */
 
+#ifdef CONFIG_TASKS_TRACE_RCU
+	int				trc_reader_nesting;
+	int				trc_ipi_to_cpu;
+	union rcu_special		trc_reader_special;
+	bool				trc_reader_checked;
+	struct list_head		trc_holdout_list;
+#endif /* #ifdef CONFIG_TASKS_TRACE_RCU */
+
 	struct sched_info		sched_info;
 
 	struct list_head		tasks;
@@ -911,6 +920,7 @@ struct task_struct {
 #ifdef CONFIG_DETECT_HUNG_TASK
 	unsigned long			last_switch_count;
 	unsigned long			last_switch_time;
+	unsigned long			killed_time;
 #endif
 	/* Filesystem information: */
 	struct fs_struct		*fs;
@@ -1187,6 +1197,9 @@ struct task_struct {
 #ifdef CONFIG_KASAN
 	unsigned int			kasan_depth;
 #endif
+#ifdef CONFIG_KCSAN
+	struct kcsan_ctx		kcsan_ctx;
+#endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	/* Index of current stored address in ret_stack: */
@@ -1237,6 +1250,9 @@ struct task_struct {
 
 	/* KCOV sequence number: */
 	int				kcov_sequence;
+
+	/* Collect coverage from softirq context: */
+	unsigned int			kcov_softirq;
 #endif
 
 #ifdef CONFIG_MEMCG
@@ -1289,6 +1305,13 @@ struct task_struct {
 	unsigned long			prev_lowest_stack;
 #endif
 
+#ifdef CONFIG_DEBUG_AID_FOR_SYZBOT
+	unsigned long			getblk_stamp;
+	unsigned int			getblk_executed;
+	unsigned int			getblk_bh_count;
+	unsigned long			getblk_bh_state;
+#endif
+
 	/*
 	 * New fields for task_struct should be added above here, so that
 	 * they are included in the randomized portion of task_struct.
diff --git a/include/linux/sched/debug.h b/include/linux/sched/debug.h
index 95fb9e025247..00c45a0e6abe 100644
--- a/include/linux/sched/debug.h
+++ b/include/linux/sched/debug.h
@@ -30,7 +30,8 @@ extern void show_regs(struct pt_regs *);
  * task), SP is the stack pointer of the first frame that should be shown in the back
  * trace (or NULL if the entire call-chain of the task should be shown).
  */
-extern void show_stack(struct task_struct *task, unsigned long *sp);
+extern void show_stack(struct task_struct *task, unsigned long *sp,
+		       const char *loglvl);
 
 extern void sched_show_task(struct task_struct *p);
 
diff --git a/include/linux/sched/sysctl.h b/include/linux/sched/sysctl.h
index d4f6215ee03f..660ac49f2b53 100644
--- a/include/linux/sched/sysctl.h
+++ b/include/linux/sched/sysctl.h
@@ -7,14 +7,20 @@
 struct ctl_table;
 
 #ifdef CONFIG_DETECT_HUNG_TASK
+
+#ifdef CONFIG_SMP
+extern unsigned int sysctl_hung_task_all_cpu_backtrace;
+#else
+#define sysctl_hung_task_all_cpu_backtrace 0
+#endif /* CONFIG_SMP */
+
 extern int	     sysctl_hung_task_check_count;
 extern unsigned int  sysctl_hung_task_panic;
 extern unsigned long sysctl_hung_task_timeout_secs;
 extern unsigned long sysctl_hung_task_check_interval_secs;
 extern int sysctl_hung_task_warnings;
-extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
-					 void __user *buffer,
-					 size_t *lenp, loff_t *ppos);
+int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
 #else
 /* Avoid need for ifdefs elsewhere in the code */
 enum { sysctl_hung_task_timeout_secs = 0 };
@@ -43,8 +49,7 @@ extern __read_mostly unsigned int sysctl_sched_migration_cost;
 extern __read_mostly unsigned int sysctl_sched_nr_migrate;
 
 int sched_proc_update_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *length,
-		loff_t *ppos);
+		void *buffer, size_t *length, loff_t *ppos);
 #endif
 
 /*
@@ -72,33 +77,21 @@ extern unsigned int sysctl_sched_autogroup_enabled;
 extern int sysctl_sched_rr_timeslice;
 extern int sched_rr_timeslice;
 
-extern int sched_rr_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-
-extern int sched_rt_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-
-#ifdef CONFIG_UCLAMP_TASK
-extern int sysctl_sched_uclamp_handler(struct ctl_table *table, int write,
-				       void __user *buffer, size_t *lenp,
-				       loff_t *ppos);
-#endif
-
-extern int sysctl_numa_balancing(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp,
-				 loff_t *ppos);
-
-extern int sysctl_schedstats(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp,
-				 loff_t *ppos);
+int sched_rr_handler(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos);
+int sched_rt_handler(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos);
+int sysctl_sched_uclamp_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
+int sysctl_numa_balancing(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos);
+int sysctl_schedstats(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos);
 
 #if defined(CONFIG_ENERGY_MODEL) && defined(CONFIG_CPU_FREQ_GOV_SCHEDUTIL)
 extern unsigned int sysctl_sched_energy_aware;
-extern int sched_energy_aware_handler(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp,
-				 loff_t *ppos);
+int sched_energy_aware_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
 #endif
 
 #endif /* _LINUX_SCHED_SYSCTL_H */
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 5c873a59b387..ce2f5c28b2df 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -4,6 +4,10 @@
  *
  * Copyright (C) 2018 ARM Ltd.
  */
+
+#ifndef _LINUX_SCMI_PROTOCOL_H
+#define _LINUX_SCMI_PROTOCOL_H
+
 #include <linux/device.h>
 #include <linux/types.h>
 
@@ -319,3 +323,5 @@ static inline void scmi_driver_unregister(struct scmi_driver *driver) {}
 typedef int (*scmi_prot_init_fn_t)(struct scmi_handle *);
 int scmi_protocol_register(int protocol_id, scmi_prot_init_fn_t fn);
 void scmi_protocol_unregister(int protocol_id);
+
+#endif /* _LINUX_SCMI_PROTOCOL_H */
diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h
index ecb004711acf..afbf8037d8db 100644
--- a/include/linux/scpi_protocol.h
+++ b/include/linux/scpi_protocol.h
@@ -4,6 +4,10 @@
  *
  * Copyright (C) 2014 ARM Ltd.
  */
+
+#ifndef _LINUX_SCPI_PROTOCOL_H
+#define _LINUX_SCPI_PROTOCOL_H
+
 #include <linux/types.h>
 
 struct scpi_opp {
@@ -71,3 +75,5 @@ struct scpi_ops *get_scpi_ops(void);
 #else
 static inline struct scpi_ops *get_scpi_ops(void) { return NULL; }
 #endif
+
+#endif /* _LINUX_SCPI_PROTOCOL_H */
diff --git a/include/linux/sctp.h b/include/linux/sctp.h
index 8ccd82105de8..76731230bbc5 100644
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@@ -221,7 +221,7 @@ struct sctp_datahdr {
 	__be16 stream;
 	__be16 ssn;
 	__u32 ppid;
-	__u8  payload[0];
+	__u8  payload[];
 };
 
 struct sctp_data_chunk {
@@ -269,7 +269,7 @@ struct sctp_inithdr {
 	__be16 num_outbound_streams;
 	__be16 num_inbound_streams;
 	__be32 initial_tsn;
-	__u8  params[0];
+	__u8  params[];
 };
 
 struct sctp_init_chunk {
@@ -299,13 +299,13 @@ struct sctp_cookie_preserve_param {
 /* Section 3.3.2.1 Host Name Address (11) */
 struct sctp_hostname_param {
 	struct sctp_paramhdr param_hdr;
-	uint8_t hostname[0];
+	uint8_t hostname[];
 };
 
 /* Section 3.3.2.1 Supported Address Types (12) */
 struct sctp_supported_addrs_param {
 	struct sctp_paramhdr param_hdr;
-	__be16 types[0];
+	__be16 types[];
 };
 
 /* ADDIP Section 3.2.6 Adaptation Layer Indication */
@@ -317,25 +317,25 @@ struct sctp_adaptation_ind_param {
 /* ADDIP Section 4.2.7 Supported Extensions Parameter */
 struct sctp_supported_ext_param {
 	struct sctp_paramhdr param_hdr;
-	__u8 chunks[0];
+	__u8 chunks[];
 };
 
 /* AUTH Section 3.1 Random */
 struct sctp_random_param {
 	struct sctp_paramhdr param_hdr;
-	__u8 random_val[0];
+	__u8 random_val[];
 };
 
 /* AUTH Section 3.2 Chunk List */
 struct sctp_chunks_param {
 	struct sctp_paramhdr param_hdr;
-	__u8 chunks[0];
+	__u8 chunks[];
 };
 
 /* AUTH Section 3.3 HMAC Algorithm */
 struct sctp_hmac_algo_param {
 	struct sctp_paramhdr param_hdr;
-	__be16 hmac_ids[0];
+	__be16 hmac_ids[];
 };
 
 /* RFC 2960.  Section 3.3.3 Initiation Acknowledgement (INIT ACK) (2):
@@ -350,7 +350,7 @@ struct sctp_initack_chunk {
 /* Section 3.3.3.1 State Cookie (7) */
 struct sctp_cookie_param {
 	struct sctp_paramhdr p;
-	__u8 body[0];
+	__u8 body[];
 };
 
 /* Section 3.3.3.1 Unrecognized Parameters (8) */
@@ -384,7 +384,7 @@ struct sctp_sackhdr {
 	__be32 a_rwnd;
 	__be16 num_gap_ack_blocks;
 	__be16 num_dup_tsns;
-	union sctp_sack_variable variable[0];
+	union sctp_sack_variable variable[];
 };
 
 struct sctp_sack_chunk {
@@ -436,7 +436,7 @@ struct sctp_shutdown_chunk {
 struct sctp_errhdr {
 	__be16 cause;
 	__be16 length;
-	__u8  variable[0];
+	__u8  variable[];
 };
 
 struct sctp_operr_chunk {
@@ -594,7 +594,7 @@ struct sctp_fwdtsn_skip {
 
 struct sctp_fwdtsn_hdr {
 	__be32 new_cum_tsn;
-	struct sctp_fwdtsn_skip skip[0];
+	struct sctp_fwdtsn_skip skip[];
 };
 
 struct sctp_fwdtsn_chunk {
@@ -611,7 +611,7 @@ struct sctp_ifwdtsn_skip {
 
 struct sctp_ifwdtsn_hdr {
 	__be32 new_cum_tsn;
-	struct sctp_ifwdtsn_skip skip[0];
+	struct sctp_ifwdtsn_skip skip[];
 };
 
 struct sctp_ifwdtsn_chunk {
@@ -658,7 +658,7 @@ struct sctp_addip_param {
 
 struct sctp_addiphdr {
 	__be32	serial;
-	__u8	params[0];
+	__u8	params[];
 };
 
 struct sctp_addip_chunk {
@@ -718,7 +718,7 @@ struct sctp_addip_chunk {
 struct sctp_authhdr {
 	__be16 shkey_id;
 	__be16 hmac_id;
-	__u8   hmac[0];
+	__u8   hmac[];
 };
 
 struct sctp_auth_chunk {
@@ -733,7 +733,7 @@ struct sctp_infox {
 
 struct sctp_reconf_chunk {
 	struct sctp_chunkhdr chunk_hdr;
-	__u8 params[0];
+	__u8 params[];
 };
 
 struct sctp_strreset_outreq {
@@ -741,13 +741,13 @@ struct sctp_strreset_outreq {
 	__be32 request_seq;
 	__be32 response_seq;
 	__be32 send_reset_at_tsn;
-	__be16 list_of_streams[0];
+	__be16 list_of_streams[];
 };
 
 struct sctp_strreset_inreq {
 	struct sctp_paramhdr param_hdr;
 	__be32 request_seq;
-	__be16 list_of_streams[0];
+	__be16 list_of_streams[];
 };
 
 struct sctp_strreset_tsnreq {
diff --git a/include/linux/security.h b/include/linux/security.h
index a8d9310472df..69cbb23a6f94 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -56,6 +56,8 @@ struct mm_struct;
 struct fs_context;
 struct fs_parameter;
 enum fs_value_type;
+struct watch;
+struct watch_notification;
 
 /* Default (no) options for the capable function */
 #define CAP_OPT_NONE 0x0
@@ -211,7 +213,7 @@ struct request_sock;
 
 #ifdef CONFIG_MMU
 extern int mmap_min_addr_handler(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp, loff_t *ppos);
+				 void *buffer, size_t *lenp, loff_t *ppos);
 #endif
 
 /* security_inode_init_security callback function to write xattrs */
@@ -1275,6 +1277,35 @@ static inline int security_locked_down(enum lockdown_reason what)
 }
 #endif	/* CONFIG_SECURITY */
 
+#if defined(CONFIG_SECURITY) && defined(CONFIG_KEY_NOTIFICATIONS)
+int security_watch_key(struct key *key);
+#else
+static inline int security_watch_key(struct key *key)
+{
+	return 0;
+}
+#endif
+#if defined(CONFIG_SECURITY) && defined(CONFIG_DEVICE_NOTIFICATIONS)
+int security_watch_devices(void);
+#else
+static inline int security_watch_devices(void)
+{
+	return 0;
+}
+#endif
+#if defined(CONFIG_SECURITY) && defined(CONFIG_WATCH_QUEUE)
+int security_post_notification(const struct cred *w_cred,
+			       const struct cred *cred,
+			       struct watch_notification *n);
+#else
+static inline int security_post_notification(const struct cred *w_cred,
+					     const struct cred *cred,
+					     struct watch_notification *n)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_SECURITY_NETWORK
 
 int security_unix_stream_connect(struct sock *sock, struct sock *other, struct sock *newsk);
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index 0491d963d47e..8b97204f35a7 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -37,8 +37,24 @@
 #include <linux/preempt.h>
 #include <linux/lockdep.h>
 #include <linux/compiler.h>
+#include <linux/kcsan-checks.h>
 #include <asm/processor.h>
 
+/*
+ * The seqlock interface does not prescribe a precise sequence of read
+ * begin/retry/end. For readers, typically there is a call to
+ * read_seqcount_begin() and read_seqcount_retry(), however, there are more
+ * esoteric cases which do not follow this pattern.
+ *
+ * As a consequence, we take the following best-effort approach for raw usage
+ * via seqcount_t under KCSAN: upon beginning a seq-reader critical section,
+ * pessimistically mark the next KCSAN_SEQLOCK_REGION_MAX memory accesses as
+ * atomics; if there is a matching read_seqcount_retry() call, no following
+ * memory operations are considered atomic. Usage of seqlocks via seqlock_t
+ * interface is not affected.
+ */
+#define KCSAN_SEQLOCK_REGION_MAX 1000
+
 /*
  * Version using sequence counter only.
  * This can be used when code has its own mutex protecting the
@@ -115,6 +131,7 @@ static inline unsigned __read_seqcount_begin(const seqcount_t *s)
 		cpu_relax();
 		goto repeat;
 	}
+	kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX);
 	return ret;
 }
 
@@ -131,6 +148,7 @@ static inline unsigned raw_read_seqcount(const seqcount_t *s)
 {
 	unsigned ret = READ_ONCE(s->sequence);
 	smp_rmb();
+	kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX);
 	return ret;
 }
 
@@ -183,6 +201,7 @@ static inline unsigned raw_seqcount_begin(const seqcount_t *s)
 {
 	unsigned ret = READ_ONCE(s->sequence);
 	smp_rmb();
+	kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX);
 	return ret & ~1;
 }
 
@@ -202,7 +221,8 @@ static inline unsigned raw_seqcount_begin(const seqcount_t *s)
  */
 static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
 {
-	return unlikely(s->sequence != start);
+	kcsan_atomic_next(0);
+	return unlikely(READ_ONCE(s->sequence) != start);
 }
 
 /**
@@ -225,6 +245,7 @@ static inline int read_seqcount_retry(const seqcount_t *s, unsigned start)
 
 static inline void raw_write_seqcount_begin(seqcount_t *s)
 {
+	kcsan_nestable_atomic_begin();
 	s->sequence++;
 	smp_wmb();
 }
@@ -233,6 +254,7 @@ static inline void raw_write_seqcount_end(seqcount_t *s)
 {
 	smp_wmb();
 	s->sequence++;
+	kcsan_nestable_atomic_end();
 }
 
 /**
@@ -243,6 +265,13 @@ static inline void raw_write_seqcount_end(seqcount_t *s)
  * usual consistency guarantee. It is one wmb cheaper, because we can
  * collapse the two back-to-back wmb()s.
  *
+ * Note that writes surrounding the barrier should be declared atomic (e.g.
+ * via WRITE_ONCE): a) to ensure the writes become visible to other threads
+ * atomically, avoiding compiler optimizations; b) to document which writes are
+ * meant to propagate to the reader critical section. This is necessary because
+ * neither writes before and after the barrier are enclosed in a seq-writer
+ * critical section that would ensure readers are aware of ongoing writes.
+ *
  *      seqcount_t seq;
  *      bool X = true, Y = false;
  *
@@ -262,18 +291,20 @@ static inline void raw_write_seqcount_end(seqcount_t *s)
  *
  *      void write(void)
  *      {
- *              Y = true;
+ *              WRITE_ONCE(Y, true);
  *
  *              raw_write_seqcount_barrier(seq);
  *
- *              X = false;
+ *              WRITE_ONCE(X, false);
  *      }
  */
 static inline void raw_write_seqcount_barrier(seqcount_t *s)
 {
+	kcsan_nestable_atomic_begin();
 	s->sequence++;
 	smp_wmb();
 	s->sequence++;
+	kcsan_nestable_atomic_end();
 }
 
 static inline int raw_read_seqcount_latch(seqcount_t *s)
@@ -398,7 +429,9 @@ static inline void write_seqcount_end(seqcount_t *s)
 static inline void write_seqcount_invalidate(seqcount_t *s)
 {
 	smp_wmb();
+	kcsan_nestable_atomic_begin();
 	s->sequence+=2;
+	kcsan_nestable_atomic_end();
 }
 
 typedef struct {
@@ -430,11 +463,21 @@ typedef struct {
  */
 static inline unsigned read_seqbegin(const seqlock_t *sl)
 {
-	return read_seqcount_begin(&sl->seqcount);
+	unsigned ret = read_seqcount_begin(&sl->seqcount);
+
+	kcsan_atomic_next(0);  /* non-raw usage, assume closing read_seqretry() */
+	kcsan_flat_atomic_begin();
+	return ret;
 }
 
 static inline unsigned read_seqretry(const seqlock_t *sl, unsigned start)
 {
+	/*
+	 * Assume not nested: read_seqretry() may be called multiple times when
+	 * completing read critical section.
+	 */
+	kcsan_flat_atomic_end();
+
 	return read_seqcount_retry(&sl->seqcount, start);
 }
 
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
new file mode 100644
index 000000000000..7bab5d9a3d31
--- /dev/null
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ */
+
+#ifndef __MTK_MMSYS_H
+#define __MTK_MMSYS_H
+
+enum mtk_ddp_comp_id;
+struct device;
+
+void mtk_mmsys_ddp_connect(struct device *dev,
+			   enum mtk_ddp_comp_id cur,
+			   enum mtk_ddp_comp_id next);
+
+void mtk_mmsys_ddp_disconnect(struct device *dev,
+			      enum mtk_ddp_comp_id cur,
+			      enum mtk_ddp_comp_id next);
+
+#endif /* __MTK_MMSYS_H */
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
deleted file mode 100644
index 738a45b435f2..000000000000
--- a/include/linux/spi/mcp23s08.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-struct mcp23s08_platform_data {
-	/* For mcp23s08, up to 4 slaves (numbered 0..3) can share one SPI
-	 * chipselect, each providing 1 gpio_chip instance with 8 gpios.
-	 * For mpc23s17, up to 8 slaves (numbered 0..7) can share one SPI
-	 * chipselect, each providing 1 gpio_chip (port A + port B) with
-	 * 16 gpios.
-	 */
-	u32 spi_present_mask;
-
-	/* "base" is the number of the first GPIO or -1 for dynamic
-	 * assignment. If there are gaps in chip addressing the GPIO
-	 * numbers are sequential .. so for example if only slaves 0
-	 * and 3 are present, their GPIOs range from base to base+15
-	 * (or base+31 for s17 variant).
-	 */
-	unsigned	base;
-};
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 38286de779e3..aac57b5b7c21 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -394,6 +394,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *                   for example doing DMA mapping.  Called from threaded
  *                   context.
  * @transfer_one: transfer a single spi_transfer.
+ *
  *                  - return 0 if the transfer is finished,
  *                  - return 1 if the transfer is still in progress. When
  *                    the driver is finished with this transfer it must
diff --git a/include/linux/string.h b/include/linux/string.h
index 6dfbb2efa815..9b7a0632e87a 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -272,6 +272,31 @@ void __read_overflow3(void) __compiletime_error("detected read beyond size of ob
 void __write_overflow(void) __compiletime_error("detected write beyond size of object passed as 1st parameter");
 
 #if !defined(__NO_FORTIFY) && defined(__OPTIMIZE__) && defined(CONFIG_FORTIFY_SOURCE)
+
+#ifdef CONFIG_KASAN
+extern void *__underlying_memchr(const void *p, int c, __kernel_size_t size) __RENAME(memchr);
+extern int __underlying_memcmp(const void *p, const void *q, __kernel_size_t size) __RENAME(memcmp);
+extern void *__underlying_memcpy(void *p, const void *q, __kernel_size_t size) __RENAME(memcpy);
+extern void *__underlying_memmove(void *p, const void *q, __kernel_size_t size) __RENAME(memmove);
+extern void *__underlying_memset(void *p, int c, __kernel_size_t size) __RENAME(memset);
+extern char *__underlying_strcat(char *p, const char *q) __RENAME(strcat);
+extern char *__underlying_strcpy(char *p, const char *q) __RENAME(strcpy);
+extern __kernel_size_t __underlying_strlen(const char *p) __RENAME(strlen);
+extern char *__underlying_strncat(char *p, const char *q, __kernel_size_t count) __RENAME(strncat);
+extern char *__underlying_strncpy(char *p, const char *q, __kernel_size_t size) __RENAME(strncpy);
+#else
+#define __underlying_memchr	__builtin_memchr
+#define __underlying_memcmp	__builtin_memcmp
+#define __underlying_memcpy	__builtin_memcpy
+#define __underlying_memmove	__builtin_memmove
+#define __underlying_memset	__builtin_memset
+#define __underlying_strcat	__builtin_strcat
+#define __underlying_strcpy	__builtin_strcpy
+#define __underlying_strlen	__builtin_strlen
+#define __underlying_strncat	__builtin_strncat
+#define __underlying_strncpy	__builtin_strncpy
+#endif
+
 __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
 {
 	size_t p_size = __builtin_object_size(p, 0);
@@ -279,14 +304,14 @@ __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
 		__write_overflow();
 	if (p_size < size)
 		fortify_panic(__func__);
-	return __builtin_strncpy(p, q, size);
+	return __underlying_strncpy(p, q, size);
 }
 
 __FORTIFY_INLINE char *strcat(char *p, const char *q)
 {
 	size_t p_size = __builtin_object_size(p, 0);
 	if (p_size == (size_t)-1)
-		return __builtin_strcat(p, q);
+		return __underlying_strcat(p, q);
 	if (strlcat(p, q, p_size) >= p_size)
 		fortify_panic(__func__);
 	return p;
@@ -300,7 +325,7 @@ __FORTIFY_INLINE __kernel_size_t strlen(const char *p)
 	/* Work around gcc excess stack consumption issue */
 	if (p_size == (size_t)-1 ||
 	    (__builtin_constant_p(p[p_size - 1]) && p[p_size - 1] == '\0'))
-		return __builtin_strlen(p);
+		return __underlying_strlen(p);
 	ret = strnlen(p, p_size);
 	if (p_size <= ret)
 		fortify_panic(__func__);
@@ -333,7 +358,7 @@ __FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size)
 			__write_overflow();
 		if (len >= p_size)
 			fortify_panic(__func__);
-		__builtin_memcpy(p, q, len);
+		__underlying_memcpy(p, q, len);
 		p[len] = '\0';
 	}
 	return ret;
@@ -346,12 +371,12 @@ __FORTIFY_INLINE char *strncat(char *p, const char *q, __kernel_size_t count)
 	size_t p_size = __builtin_object_size(p, 0);
 	size_t q_size = __builtin_object_size(q, 0);
 	if (p_size == (size_t)-1 && q_size == (size_t)-1)
-		return __builtin_strncat(p, q, count);
+		return __underlying_strncat(p, q, count);
 	p_len = strlen(p);
 	copy_len = strnlen(q, count);
 	if (p_size < p_len + copy_len + 1)
 		fortify_panic(__func__);
-	__builtin_memcpy(p + p_len, q, copy_len);
+	__underlying_memcpy(p + p_len, q, copy_len);
 	p[p_len + copy_len] = '\0';
 	return p;
 }
@@ -363,7 +388,7 @@ __FORTIFY_INLINE void *memset(void *p, int c, __kernel_size_t size)
 		__write_overflow();
 	if (p_size < size)
 		fortify_panic(__func__);
-	return __builtin_memset(p, c, size);
+	return __underlying_memset(p, c, size);
 }
 
 __FORTIFY_INLINE void *memcpy(void *p, const void *q, __kernel_size_t size)
@@ -378,7 +403,7 @@ __FORTIFY_INLINE void *memcpy(void *p, const void *q, __kernel_size_t size)
 	}
 	if (p_size < size || q_size < size)
 		fortify_panic(__func__);
-	return __builtin_memcpy(p, q, size);
+	return __underlying_memcpy(p, q, size);
 }
 
 __FORTIFY_INLINE void *memmove(void *p, const void *q, __kernel_size_t size)
@@ -393,7 +418,7 @@ __FORTIFY_INLINE void *memmove(void *p, const void *q, __kernel_size_t size)
 	}
 	if (p_size < size || q_size < size)
 		fortify_panic(__func__);
-	return __builtin_memmove(p, q, size);
+	return __underlying_memmove(p, q, size);
 }
 
 extern void *__real_memscan(void *, int, __kernel_size_t) __RENAME(memscan);
@@ -419,7 +444,7 @@ __FORTIFY_INLINE int memcmp(const void *p, const void *q, __kernel_size_t size)
 	}
 	if (p_size < size || q_size < size)
 		fortify_panic(__func__);
-	return __builtin_memcmp(p, q, size);
+	return __underlying_memcmp(p, q, size);
 }
 
 __FORTIFY_INLINE void *memchr(const void *p, int c, __kernel_size_t size)
@@ -429,7 +454,7 @@ __FORTIFY_INLINE void *memchr(const void *p, int c, __kernel_size_t size)
 		__read_overflow();
 	if (p_size < size)
 		fortify_panic(__func__);
-	return __builtin_memchr(p, c, size);
+	return __underlying_memchr(p, c, size);
 }
 
 void *__real_memchr_inv(const void *s, int c, size_t n) __RENAME(memchr_inv);
@@ -460,11 +485,22 @@ __FORTIFY_INLINE char *strcpy(char *p, const char *q)
 	size_t p_size = __builtin_object_size(p, 0);
 	size_t q_size = __builtin_object_size(q, 0);
 	if (p_size == (size_t)-1 && q_size == (size_t)-1)
-		return __builtin_strcpy(p, q);
+		return __underlying_strcpy(p, q);
 	memcpy(p, q, strlen(q) + 1);
 	return p;
 }
 
+/* Don't use these outside the FORITFY_SOURCE implementation */
+#undef __underlying_memchr
+#undef __underlying_memcmp
+#undef __underlying_memcpy
+#undef __underlying_memmove
+#undef __underlying_memset
+#undef __underlying_strcat
+#undef __underlying_strcpy
+#undef __underlying_strlen
+#undef __underlying_strncat
+#undef __underlying_strncpy
 #endif
 
 /**
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 1815065d52f3..35cf5ecc0f80 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -876,6 +876,9 @@ asmlinkage long sys_munlockall(void);
 asmlinkage long sys_mincore(unsigned long start, size_t len,
 				unsigned char __user * vec);
 asmlinkage long sys_madvise(unsigned long start, size_t len, int behavior);
+asmlinkage long sys_process_madvise(int which, pid_t upid,
+		const struct iovec __user *vec, unsigned long vlen,
+		int behavior, unsigned long flags);
 asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
 			unsigned long prot, unsigned long pgoff,
 			unsigned long flags);
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 02fa84493f23..50bb7f383a1b 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -44,35 +44,26 @@ struct ctl_dir;
 
 extern const int sysctl_vals[];
 
-typedef int proc_handler (struct ctl_table *ctl, int write,
-			  void __user *buffer, size_t *lenp, loff_t *ppos);
-
-extern int proc_dostring(struct ctl_table *, int,
-			 void __user *, size_t *, loff_t *);
-extern int proc_dointvec(struct ctl_table *, int,
-			 void __user *, size_t *, loff_t *);
-extern int proc_douintvec(struct ctl_table *, int,
-			 void __user *, size_t *, loff_t *);
-extern int proc_dointvec_minmax(struct ctl_table *, int,
-				void __user *, size_t *, loff_t *);
-extern int proc_douintvec_minmax(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp,
-				 loff_t *ppos);
-extern int proc_dointvec_jiffies(struct ctl_table *, int,
-				 void __user *, size_t *, loff_t *);
-extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-extern int proc_dointvec_ms_jiffies(struct ctl_table *, int,
-				    void __user *, size_t *, loff_t *);
-extern int proc_doulongvec_minmax(struct ctl_table *, int,
-				  void __user *, size_t *, loff_t *);
-extern int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int,
-				      void __user *, size_t *, loff_t *);
-extern int proc_do_large_bitmap(struct ctl_table *, int,
-				void __user *, size_t *, loff_t *);
-extern int proc_do_static_key(struct ctl_table *table, int write,
-			      void __user *buffer, size_t *lenp,
-			      loff_t *ppos);
+typedef int proc_handler(struct ctl_table *ctl, int write, void *buffer,
+		size_t *lenp, loff_t *ppos);
+
+int proc_dostring(struct ctl_table *, int, void *, size_t *, loff_t *);
+int proc_dointvec(struct ctl_table *, int, void *, size_t *, loff_t *);
+int proc_douintvec(struct ctl_table *, int, void *, size_t *, loff_t *);
+int proc_dointvec_minmax(struct ctl_table *, int, void *, size_t *, loff_t *);
+int proc_douintvec_minmax(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos);
+int proc_dointvec_jiffies(struct ctl_table *, int, void *, size_t *, loff_t *);
+int proc_dointvec_userhz_jiffies(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
+int proc_dointvec_ms_jiffies(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
+int proc_doulongvec_minmax(struct ctl_table *, int, void *, size_t *, loff_t *);
+int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int, void *,
+		size_t *, loff_t *);
+int proc_do_large_bitmap(struct ctl_table *, int, void *, size_t *, loff_t *);
+int proc_do_static_key(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos);
 
 /*
  * Register a set of sysctl names by calling register_sysctl_table
@@ -206,8 +197,17 @@ struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
 void unregister_sysctl_table(struct ctl_table_header * table);
 
 extern int sysctl_init(void);
+void do_sysctl_args(void);
+
+extern int pwrsw_enabled;
+extern int unaligned_enabled;
+extern int unaligned_dump_stack;
+extern int no_unaligned_warning;
 
 extern struct ctl_table sysctl_mount_point[];
+extern struct ctl_table random_table[];
+extern struct ctl_table firmware_config_table[];
+extern struct ctl_table epoll_table[];
 
 #else /* CONFIG_SYSCTL */
 static inline struct ctl_table_header *register_sysctl_table(struct ctl_table * table)
@@ -236,9 +236,12 @@ static inline void setup_sysctl_set(struct ctl_table_set *p,
 {
 }
 
+static inline void do_sysctl_args(void)
+{
+}
 #endif /* CONFIG_SYSCTL */
 
-int sysctl_max_threads(struct ctl_table *table, int write,
-		       void __user *buffer, size_t *lenp, loff_t *ppos);
+int sysctl_max_threads(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos);
 
 #endif /* _LINUX_SYSCTL_H */
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 80bb865b3a33..86067dbe7745 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -7,7 +7,7 @@
  * Copyright (c) 2007 SUSE Linux Products GmbH
  * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
  *
- * Please see Documentation/filesystems/sysfs.txt for more information.
+ * Please see Documentation/filesystems/sysfs.rst for more information.
  */
 
 #ifndef _SYSFS_H_
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index c91b1e344d56..216185bb3014 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -32,20 +32,10 @@
 /* use value, which < 0K, to indicate an invalid/uninitialized temperature */
 #define THERMAL_TEMP_INVALID	-274000
 
-/* Default Thermal Governor */
-#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
-#define DEFAULT_THERMAL_GOVERNOR       "step_wise"
-#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE)
-#define DEFAULT_THERMAL_GOVERNOR       "fair_share"
-#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE)
-#define DEFAULT_THERMAL_GOVERNOR       "user_space"
-#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR)
-#define DEFAULT_THERMAL_GOVERNOR       "power_allocator"
-#endif
-
 struct thermal_zone_device;
 struct thermal_cooling_device;
 struct thermal_instance;
+struct thermal_attr;
 
 enum thermal_device_mode {
 	THERMAL_DEVICE_DISABLED = 0,
@@ -130,11 +120,6 @@ struct thermal_cooling_device {
 	struct list_head node;
 };
 
-struct thermal_attr {
-	struct device_attribute attr;
-	char name[THERMAL_NAME_LENGTH];
-};
-
 /**
  * struct thermal_zone_device - structure for a thermal zone
  * @id:		unique id number for each thermal zone
@@ -347,21 +332,6 @@ struct thermal_zone_of_device_ops {
 	int (*set_trip_temp)(void *, int, int);
 };
 
-/**
- * struct thermal_trip - representation of a point in temperature domain
- * @np: pointer to struct device_node that this trip point was created from
- * @temperature: temperature value in miliCelsius
- * @hysteresis: relative hysteresis in miliCelsius
- * @type: trip point type
- */
-
-struct thermal_trip {
-	struct device_node *np;
-	int temperature;
-	int hysteresis;
-	enum thermal_trip_type type;
-};
-
 /* Function declarations */
 #ifdef CONFIG_THERMAL_OF
 int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
@@ -413,19 +383,7 @@ void devm_thermal_zone_of_sensor_unregister(struct device *dev,
 
 #endif
 
-#if IS_ENABLED(CONFIG_THERMAL)
-static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
-{
-	return cdev->ops->get_requested_power && cdev->ops->state2power &&
-		cdev->ops->power2state;
-}
-
-int power_actor_get_max_power(struct thermal_cooling_device *,
-			      struct thermal_zone_device *tz, u32 *max_power);
-int power_actor_get_min_power(struct thermal_cooling_device *,
-			      struct thermal_zone_device *tz, u32 *min_power);
-int power_actor_set_power(struct thermal_cooling_device *,
-			  struct thermal_instance *, u32);
+#ifdef CONFIG_THERMAL
 struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
 		void *, struct thermal_zone_device_ops *,
 		struct thermal_zone_params *, int, int);
@@ -439,7 +397,6 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
 				       struct thermal_cooling_device *);
 void thermal_zone_device_update(struct thermal_zone_device *,
 				enum thermal_notify_event);
-void thermal_zone_set_trips(struct thermal_zone_device *);
 
 struct thermal_cooling_device *thermal_cooling_device_register(const char *,
 		void *, const struct thermal_cooling_device_ops *);
@@ -457,24 +414,9 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
 int thermal_zone_get_slope(struct thermal_zone_device *tz);
 int thermal_zone_get_offset(struct thermal_zone_device *tz);
 
-int get_tz_trend(struct thermal_zone_device *, int);
-struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
-		struct thermal_cooling_device *, int);
 void thermal_cdev_update(struct thermal_cooling_device *);
 void thermal_notify_framework(struct thermal_zone_device *, int);
 #else
-static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
-{ return false; }
-static inline int power_actor_get_max_power(struct thermal_cooling_device *cdev,
-			      struct thermal_zone_device *tz, u32 *max_power)
-{ return 0; }
-static inline int power_actor_get_min_power(struct thermal_cooling_device *cdev,
-					    struct thermal_zone_device *tz,
-					    u32 *min_power)
-{ return -ENODEV; }
-static inline int power_actor_set_power(struct thermal_cooling_device *cdev,
-			  struct thermal_instance *tz, u32 power)
-{ return 0; }
 static inline struct thermal_zone_device *thermal_zone_device_register(
 	const char *type, int trips, int mask, void *devdata,
 	struct thermal_zone_device_ops *ops,
@@ -484,21 +426,6 @@ static inline struct thermal_zone_device *thermal_zone_device_register(
 static inline void thermal_zone_device_unregister(
 	struct thermal_zone_device *tz)
 { }
-static inline int thermal_zone_bind_cooling_device(
-	struct thermal_zone_device *tz, int trip,
-	struct thermal_cooling_device *cdev,
-	unsigned long upper, unsigned long lower,
-	unsigned int weight)
-{ return -ENODEV; }
-static inline int thermal_zone_unbind_cooling_device(
-	struct thermal_zone_device *tz, int trip,
-	struct thermal_cooling_device *cdev)
-{ return -ENODEV; }
-static inline void thermal_zone_device_update(struct thermal_zone_device *tz,
-					      enum thermal_notify_event event)
-{ }
-static inline void thermal_zone_set_trips(struct thermal_zone_device *tz)
-{ }
 static inline struct thermal_cooling_device *
 thermal_cooling_device_register(char *type, void *devdata,
 	const struct thermal_cooling_device_ops *ops)
@@ -530,12 +457,7 @@ static inline int thermal_zone_get_slope(
 static inline int thermal_zone_get_offset(
 		struct thermal_zone_device *tz)
 { return -ENODEV; }
-static inline int get_tz_trend(struct thermal_zone_device *tz, int trip)
-{ return -ENODEV; }
-static inline struct thermal_instance *
-get_thermal_instance(struct thermal_zone_device *tz,
-	struct thermal_cooling_device *cdev, int trip)
-{ return ERR_PTR(-ENODEV); }
+
 static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
 { }
 static inline void thermal_notify_framework(struct thermal_zone_device *tz,
diff --git a/include/linux/thunderbolt.h b/include/linux/thunderbolt.h
index ece782ef5466..ff397c0d5c07 100644
--- a/include/linux/thunderbolt.h
+++ b/include/linux/thunderbolt.h
@@ -80,7 +80,7 @@ struct tb {
 	int index;
 	enum tb_security_level security_level;
 	size_t nboot_acl;
-	unsigned long privdata[0];
+	unsigned long privdata[];
 };
 
 extern struct bus_type tb_bus_type;
diff --git a/include/linux/tifm.h b/include/linux/tifm.h
index 299cbb8c63bb..44073d06710f 100644
--- a/include/linux/tifm.h
+++ b/include/linux/tifm.h
@@ -124,7 +124,7 @@ struct tifm_adapter {
 	int                 (*has_ms_pif)(struct tifm_adapter *fm,
 					  struct tifm_dev *sock);
 
-	struct tifm_dev     *sockets[0];
+	struct tifm_dev     *sockets[];
 };
 
 struct tifm_adapter *tifm_alloc_adapter(unsigned int num_sockets,
diff --git a/include/linux/timer.h b/include/linux/timer.h
index 0dc19a8c39c9..07910ae5ddd9 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -201,8 +201,7 @@ struct ctl_table;
 
 extern unsigned int sysctl_timer_migration;
 int timer_migration_handler(struct ctl_table *table, int write,
-			    void __user *buffer, size_t *lenp,
-			    loff_t *ppos);
+			    void *buffer, size_t *lenp, loff_t *ppos);
 #endif
 
 unsigned long __round_jiffies(unsigned long j, int cpu);
diff --git a/include/linux/torture.h b/include/linux/torture.h
index 6241f59e2d6f..7f65bd1dd307 100644
--- a/include/linux/torture.h
+++ b/include/linux/torture.h
@@ -55,6 +55,11 @@ struct torture_random_state {
 #define DEFINE_TORTURE_RANDOM_PERCPU(name) \
 	DEFINE_PER_CPU(struct torture_random_state, name)
 unsigned long torture_random(struct torture_random_state *trsp);
+static inline void torture_random_init(struct torture_random_state *trsp)
+{
+	trsp->trs_state = 0;
+	trsp->trs_count = 0;
+}
 
 /* Task shuffler, which causes CPUs to occasionally go idle. */
 void torture_shuffle_task_register(struct task_struct *tp);
@@ -89,7 +94,7 @@ void _torture_stop_kthread(char *m, struct task_struct **tp);
 #ifdef CONFIG_PREEMPTION
 #define torture_preempt_schedule() preempt_schedule()
 #else
-#define torture_preempt_schedule()
+#define torture_preempt_schedule()	do { } while (0)
 #endif
 
 #endif /* __LINUX_TORTURE_H */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index bd5fe0e907e8..a99e9b8e4e31 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -66,7 +66,7 @@ struct tty_buffer {
 	int read;
 	int flags;
 	/* Data points here */
-	unsigned long data[0];
+	unsigned long data[];
 };
 
 /* Values for .flags field of tty_buffer */
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index 67f016010aad..8a215c5c1aed 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -2,9 +2,9 @@
 #ifndef __LINUX_UACCESS_H__
 #define __LINUX_UACCESS_H__
 
+#include <linux/instrumented.h>
 #include <linux/sched.h>
 #include <linux/thread_info.h>
-#include <linux/kasan-checks.h>
 
 #define uaccess_kernel() segment_eq(get_fs(), KERNEL_DS)
 
@@ -58,7 +58,7 @@
 static __always_inline __must_check unsigned long
 __copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
 {
-	kasan_check_write(to, n);
+	instrument_copy_from_user(to, from, n);
 	check_object_size(to, n, false);
 	return raw_copy_from_user(to, from, n);
 }
@@ -67,7 +67,7 @@ static __always_inline __must_check unsigned long
 __copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	might_fault();
-	kasan_check_write(to, n);
+	instrument_copy_from_user(to, from, n);
 	check_object_size(to, n, false);
 	return raw_copy_from_user(to, from, n);
 }
@@ -88,7 +88,7 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
 static __always_inline __must_check unsigned long
 __copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
 {
-	kasan_check_read(from, n);
+	instrument_copy_to_user(to, from, n);
 	check_object_size(from, n, true);
 	return raw_copy_to_user(to, from, n);
 }
@@ -97,7 +97,7 @@ static __always_inline __must_check unsigned long
 __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	might_fault();
-	kasan_check_read(from, n);
+	instrument_copy_to_user(to, from, n);
 	check_object_size(from, n, true);
 	return raw_copy_to_user(to, from, n);
 }
@@ -109,7 +109,7 @@ _copy_from_user(void *to, const void __user *from, unsigned long n)
 	unsigned long res = n;
 	might_fault();
 	if (likely(access_ok(from, n))) {
-		kasan_check_write(to, n);
+		instrument_copy_from_user(to, from, n);
 		res = raw_copy_from_user(to, from, n);
 	}
 	if (unlikely(res))
@@ -127,7 +127,7 @@ _copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	might_fault();
 	if (access_ok(to, n)) {
-		kasan_check_read(from, n);
+		instrument_copy_to_user(to, from, n);
 		n = raw_copy_to_user(to, from, n);
 	}
 	return n;
diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h
index dc236577b92f..1eaaa93c37bf 100644
--- a/include/linux/vermagic.h
+++ b/include/linux/vermagic.h
@@ -2,6 +2,10 @@
 #ifndef _LINUX_VERMAGIC_H
 #define _LINUX_VERMAGIC_H
 
+#ifndef INCLUDE_VERMAGIC
+#error "This header can be included from kernel/module.c or *.mod.c only"
+#endif
+
 #include <generated/utsrelease.h>
 #include <asm/vermagic.h>
 
diff --git a/include/linux/virtio_vsock.h b/include/linux/virtio_vsock.h
index 71c81e0dc8f2..dc636b727179 100644
--- a/include/linux/virtio_vsock.h
+++ b/include/linux/virtio_vsock.h
@@ -48,6 +48,7 @@ struct virtio_vsock_pkt {
 	u32 len;
 	u32 off;
 	bool reply;
+	bool tap_delivered;
 };
 
 struct virtio_vsock_pkt_info {
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index a95d3cc74d79..3332926295d4 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -88,8 +88,7 @@ struct vmap_area {
  *	Highlevel APIs for driver use
  */
 extern void vm_unmap_ram(const void *mem, unsigned int count);
-extern void *vm_map_ram(struct page **pages, unsigned int count,
-				int node, pgprot_t prot);
+extern void *vm_map_ram(struct page **pages, unsigned int count, int node);
 extern void vm_unmap_aliases(void);
 
 #ifdef CONFIG_MMU
@@ -107,26 +106,16 @@ extern void *vzalloc(unsigned long size);
 extern void *vmalloc_user(unsigned long size);
 extern void *vmalloc_node(unsigned long size, int node);
 extern void *vzalloc_node(unsigned long size, int node);
-extern void *vmalloc_user_node_flags(unsigned long size, int node, gfp_t flags);
 extern void *vmalloc_exec(unsigned long size);
 extern void *vmalloc_32(unsigned long size);
 extern void *vmalloc_32_user(unsigned long size);
-extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot);
+extern void *__vmalloc(unsigned long size, gfp_t gfp_mask);
 extern void *__vmalloc_node_range(unsigned long size, unsigned long align,
 			unsigned long start, unsigned long end, gfp_t gfp_mask,
 			pgprot_t prot, unsigned long vm_flags, int node,
 			const void *caller);
-#ifndef CONFIG_MMU
-extern void *__vmalloc_node_flags(unsigned long size, int node, gfp_t flags);
-static inline void *__vmalloc_node_flags_caller(unsigned long size, int node,
-						gfp_t flags, void *caller)
-{
-	return __vmalloc_node_flags(size, node, flags);
-}
-#else
-extern void *__vmalloc_node_flags_caller(unsigned long size,
-					 int node, gfp_t flags, void *caller);
-#endif
+void *__vmalloc_node(unsigned long size, unsigned long align, gfp_t gfp_mask,
+		int node, const void *caller);
 
 extern void vfree(const void *addr);
 extern void vfree_atomic(const void *addr);
@@ -161,8 +150,6 @@ static inline size_t get_vm_area_size(const struct vm_struct *area)
 extern struct vm_struct *get_vm_area(unsigned long size, unsigned long flags);
 extern struct vm_struct *get_vm_area_caller(unsigned long size,
 					unsigned long flags, const void *caller);
-extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
-					unsigned long start, unsigned long end);
 extern struct vm_struct *__get_vm_area_caller(unsigned long size,
 					unsigned long flags,
 					unsigned long start, unsigned long end,
@@ -170,11 +157,11 @@ extern struct vm_struct *__get_vm_area_caller(unsigned long size,
 extern struct vm_struct *remove_vm_area(const void *addr);
 extern struct vm_struct *find_vm_area(const void *addr);
 
-extern int map_vm_area(struct vm_struct *area, pgprot_t prot,
-			struct page **pages);
 #ifdef CONFIG_MMU
 extern int map_kernel_range_noflush(unsigned long start, unsigned long size,
 				    pgprot_t prot, struct page **pages);
+int map_kernel_range(unsigned long start, unsigned long size, pgprot_t prot,
+		struct page **pages);
 extern void unmap_kernel_range_noflush(unsigned long addr, unsigned long size);
 extern void unmap_kernel_range(unsigned long addr, unsigned long size);
 static inline void set_vm_flush_reset_perms(void *addr)
@@ -191,14 +178,12 @@ map_kernel_range_noflush(unsigned long start, unsigned long size,
 {
 	return size >> PAGE_SHIFT;
 }
+#define map_kernel_range map_kernel_range_noflush
 static inline void
 unmap_kernel_range_noflush(unsigned long addr, unsigned long size)
 {
 }
-static inline void
-unmap_kernel_range(unsigned long addr, unsigned long size)
-{
-}
+#define unmap_kernel_range unmap_kernel_range_noflush
 static inline void set_vm_flush_reset_perms(void *addr)
 {
 }
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index 292485f3d24d..f290c8480dd3 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -16,8 +16,8 @@ extern int sysctl_stat_interval;
 #define DISABLE_NUMA_STAT   0
 extern int sysctl_vm_numa_stat;
 DECLARE_STATIC_KEY_TRUE(vm_numa_stat_key);
-extern int sysctl_vm_numa_stat_handler(struct ctl_table *table,
-		int write, void __user *buffer, size_t *length, loff_t *ppos);
+int sysctl_vm_numa_stat_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *length, loff_t *ppos);
 #endif
 
 struct reclaim_stat {
@@ -29,6 +29,7 @@ struct reclaim_stat {
 	unsigned nr_activate[2];
 	unsigned nr_ref_keep;
 	unsigned nr_unmap_fail;
+	unsigned nr_lazyfree_fail;
 };
 
 enum writeback_stat_item {
@@ -274,8 +275,8 @@ void cpu_vm_stats_fold(int cpu);
 void refresh_zone_stat_thresholds(void);
 
 struct ctl_table;
-int vmstat_refresh(struct ctl_table *, int write,
-		   void __user *buffer, size_t *lenp, loff_t *ppos);
+int vmstat_refresh(struct ctl_table *, int write, void *buffer, size_t *lenp,
+		loff_t *ppos);
 
 void drain_zonestat(struct zone *zone, struct per_cpu_pageset *);
 
diff --git a/include/linux/vringh.h b/include/linux/vringh.h
index 9e2763d7c159..59bd50f99291 100644
--- a/include/linux/vringh.h
+++ b/include/linux/vringh.h
@@ -105,9 +105,9 @@ struct vringh_kiov {
 /* Helpers for userspace vrings. */
 int vringh_init_user(struct vringh *vrh, u64 features,
 		     unsigned int num, bool weak_barriers,
-		     struct vring_desc __user *desc,
-		     struct vring_avail __user *avail,
-		     struct vring_used __user *used);
+		     vring_desc_t __user *desc,
+		     vring_avail_t __user *avail,
+		     vring_used_t __user *used);
 
 static inline void vringh_iov_init(struct vringh_iov *iov,
 				   struct iovec *iovec, unsigned num)
diff --git a/include/linux/wait.h b/include/linux/wait.h
index feeb6be5cad6..74935bc9757b 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -544,7 +544,7 @@ do {										\
 ({										\
 	int __ret = 0;								\
 	might_sleep();								\
-	if (!(condition))							\
+	if (!(condition) && (timeout))						\
 		__ret = __wait_event_hrtimeout(wq_head, condition, timeout,	\
 					       TASK_UNINTERRUPTIBLE);		\
 	__ret;									\
@@ -570,7 +570,7 @@ do {										\
 ({										\
 	long __ret = 0;								\
 	might_sleep();								\
-	if (!(condition))							\
+	if (!(condition) && (timeout))						\
 		__ret = __wait_event_hrtimeout(wq, condition, timeout,		\
 					       TASK_INTERRUPTIBLE);		\
 	__ret;									\
@@ -1149,4 +1149,6 @@ int autoremove_wake_function(struct wait_queue_entry *wq_entry, unsigned mode, i
 		(wait)->flags = 0;						\
 	} while (0)
 
+bool try_invoke_on_locked_down_task(struct task_struct *p, bool (*func)(struct task_struct *t, void *arg), void *arg);
+
 #endif /* _LINUX_WAIT_H */
diff --git a/include/linux/watch_queue.h b/include/linux/watch_queue.h
new file mode 100644
index 000000000000..5e08db2adc31
--- /dev/null
+++ b/include/linux/watch_queue.h
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/* User-mappable watch queue
+ *
+ * Copyright (C) 2020 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * See Documentation/watch_queue.rst
+ */
+
+#ifndef _LINUX_WATCH_QUEUE_H
+#define _LINUX_WATCH_QUEUE_H
+
+#include <uapi/linux/watch_queue.h>
+#include <linux/kref.h>
+#include <linux/rcupdate.h>
+
+#ifdef CONFIG_WATCH_QUEUE
+
+struct cred;
+
+struct watch_type_filter {
+	enum watch_notification_type type;
+	__u32		subtype_filter[1];	/* Bitmask of subtypes to filter on */
+	__u32		info_filter;		/* Filter on watch_notification::info */
+	__u32		info_mask;		/* Mask of relevant bits in info_filter */
+};
+
+struct watch_filter {
+	union {
+		struct rcu_head	rcu;
+		unsigned long	type_filter[2];	/* Bitmask of accepted types */
+	};
+	u32			nr_filters;	/* Number of filters */
+	struct watch_type_filter filters[];
+};
+
+struct watch_queue {
+	struct rcu_head		rcu;
+	struct watch_filter __rcu *filter;
+	struct pipe_inode_info	*pipe;		/* The pipe we're using as a buffer */
+	struct hlist_head	watches;	/* Contributory watches */
+	struct page		**notes;	/* Preallocated notifications */
+	unsigned long		*notes_bitmap;	/* Allocation bitmap for notes */
+	struct kref		usage;		/* Object usage count */
+	spinlock_t		lock;
+	unsigned int		nr_notes;	/* Number of notes */
+	unsigned int		nr_pages;	/* Number of pages in notes[] */
+	bool			defunct;	/* T when queues closed */
+};
+
+/*
+ * Representation of a watch on an object.
+ */
+struct watch {
+	union {
+		struct rcu_head	rcu;
+		u32		info_id;	/* ID to be OR'd in to info field */
+	};
+	struct watch_queue __rcu *queue;	/* Queue to post events to */
+	struct hlist_node	queue_node;	/* Link in queue->watches */
+	struct watch_list __rcu	*watch_list;
+	struct hlist_node	list_node;	/* Link in watch_list->watchers */
+	const struct cred	*cred;		/* Creds of the owner of the watch */
+	void			*private;	/* Private data for the watched object */
+	u64			id;		/* Internal identifier */
+	struct kref		usage;		/* Object usage count */
+};
+
+/*
+ * List of watches on an object.
+ */
+struct watch_list {
+	struct rcu_head		rcu;
+	struct hlist_head	watchers;
+	void (*release_watch)(struct watch *);
+	spinlock_t		lock;
+};
+
+extern void __post_watch_notification(struct watch_list *,
+				      struct watch_notification *,
+				      const struct cred *,
+				      u64);
+extern struct watch_queue *get_watch_queue(int);
+extern void put_watch_queue(struct watch_queue *);
+extern void init_watch(struct watch *, struct watch_queue *);
+extern int add_watch_to_object(struct watch *, struct watch_list *);
+extern int remove_watch_from_object(struct watch_list *, struct watch_queue *, u64, bool);
+extern long watch_queue_set_size(struct pipe_inode_info *, unsigned int);
+extern long watch_queue_set_filter(struct pipe_inode_info *,
+				   struct watch_notification_filter __user *);
+extern int watch_queue_init(struct pipe_inode_info *);
+extern void watch_queue_clear(struct watch_queue *);
+
+static inline void init_watch_list(struct watch_list *wlist,
+				   void (*release_watch)(struct watch *))
+{
+	INIT_HLIST_HEAD(&wlist->watchers);
+	spin_lock_init(&wlist->lock);
+	wlist->release_watch = release_watch;
+}
+
+static inline void post_watch_notification(struct watch_list *wlist,
+					   struct watch_notification *n,
+					   const struct cred *cred,
+					   u64 id)
+{
+	if (unlikely(wlist))
+		__post_watch_notification(wlist, n, cred, id);
+}
+
+static inline void remove_watch_list(struct watch_list *wlist, u64 id)
+{
+	if (wlist) {
+		remove_watch_from_object(wlist, NULL, id, true);
+		kfree_rcu(wlist, rcu);
+	}
+}
+
+/**
+ * watch_sizeof - Calculate the information part of the size of a watch record,
+ * given the structure size.
+ */
+#define watch_sizeof(STRUCT) (sizeof(STRUCT) << WATCH_INFO_LENGTH__SHIFT)
+
+#endif
+
+#endif /* _LINUX_WATCH_QUEUE_H */
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index 417d9f37077a..1464ce6ffa31 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -37,15 +37,15 @@ struct watchdog_governor;
  *
  * The watchdog_ops structure contains a list of low-level operations
  * that control a watchdog device. It also contains the module that owns
- * these operations. The start and stop function are mandatory, all other
+ * these operations. The start function is mandatory, all other
  * functions are optional.
  */
 struct watchdog_ops {
 	struct module *owner;
 	/* mandatory operations */
 	int (*start)(struct watchdog_device *);
-	int (*stop)(struct watchdog_device *);
 	/* optional operations */
+	int (*stop)(struct watchdog_device *);
 	int (*ping)(struct watchdog_device *);
 	unsigned int (*status)(struct watchdog_device *);
 	int (*set_timeout)(struct watchdog_device *, unsigned int);
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index a19d845dd7eb..f8a7e1a850fb 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -362,24 +362,18 @@ extern int vm_highmem_is_dirtyable;
 extern int block_dump;
 extern int laptop_mode;
 
-extern int dirty_background_ratio_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-extern int dirty_background_bytes_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-extern int dirty_ratio_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-extern int dirty_bytes_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
+int dirty_background_ratio_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
+int dirty_background_bytes_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
+int dirty_ratio_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
+int dirty_bytes_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
 int dirtytime_interval_handler(struct ctl_table *table, int write,
-			       void __user *buffer, size_t *lenp, loff_t *ppos);
-
-struct ctl_table;
-int dirty_writeback_centisecs_handler(struct ctl_table *, int,
-				      void __user *, size_t *, loff_t *);
+		void *buffer, size_t *lenp, loff_t *ppos);
+int dirty_writeback_centisecs_handler(struct ctl_table *table, int write,
+		void *buffer, size_t *lenp, loff_t *ppos);
 
 void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty);
 unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh);
diff --git a/include/linux/xarray.h b/include/linux/xarray.h
index 14c893433139..3b213c6d17fb 100644
--- a/include/linux/xarray.h
+++ b/include/linux/xarray.h
@@ -1491,6 +1491,7 @@ static inline bool xas_retry(struct xa_state *xas, const void *entry)
 
 void *xas_load(struct xa_state *);
 void *xas_store(struct xa_state *, void *entry);
+void *__xas_store(struct xa_state *, void *entry);
 void *xas_find(struct xa_state *, unsigned long max);
 void *xas_find_conflict(struct xa_state *);
 
@@ -1663,7 +1664,10 @@ static inline void *xas_next_marked(struct xa_state *xas, unsigned long max,
 	entry = xa_entry(xas->xa, node, offset);
 	if (!entry)
 		return xas_find_marked(xas, max, mark);
-	return entry;
+	if (!xa_is_retry(entry))
+		return entry;
+	xas_reset(xas);
+	return xas_find_marked(xas, max, mark);
 }
 
 /*
@@ -1786,4 +1790,21 @@ static inline void *xas_next(struct xa_state *xas)
 	return xa_entry(xas->xa, node, xas->xa_offset);
 }
 
+/**
+ * xas_for_each_contig() - Iterate over contiguous entries in an XArray.
+ * @xas: XArray operation state.
+ * @entry: Entry retrieved from the array.
+ * @max: Maximum index to retrieve from array.
+ *
+ * The loop body will be executed for each contiguous entry in the array
+ * between the current xas position and @max, inclusive.  @entry will
+ * be set to the entry retrieved from the XArray.  It is safe to delete
+ * entries from the array in the loop body.  You should hold either the
+ * RCU lock or the xa_lock while iterating.  If you need to drop the lock,
+ * call xas_pause() first.
+ */
+#define xas_for_each_contig(xas, entry, max) \
+	for (entry = xas.xa_index <= max ? xas_load(xas) : NULL; entry; \
+	     entry = xas.xa_index <= max ? xas_next(xas) : NULL)
+
 #endif /* _LINUX_XARRAY_H */
diff --git a/include/linux/zsmalloc.h b/include/linux/zsmalloc.h
index 2219cce81ca4..0fdbf653b173 100644
--- a/include/linux/zsmalloc.h
+++ b/include/linux/zsmalloc.h
@@ -20,7 +20,7 @@
  * zsmalloc mapping modes
  *
  * NOTE: These only make a difference when a mapped object spans pages.
- * They also have no effect when PGTABLE_MAPPING is selected.
+ * They also have no effect when ZSMALLOC_PGTABLE_MAPPING is selected.
  */
 enum zs_mapmode {
 	ZS_MM_RW, /* normal read-write mapping */
diff --git a/include/media/cec-notifier.h b/include/media/cec-notifier.h
index 38956969fd12..b1c839734124 100644
--- a/include/media/cec-notifier.h
+++ b/include/media/cec-notifier.h
@@ -2,7 +2,7 @@
 /*
  * cec-notifier.h - notify CEC drivers of physical address changes
  *
- * Copyright 2016 Russell King <rmk+kernel@arm.linux.org.uk>
+ * Copyright 2016 Russell King.
  * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
  */
 
diff --git a/include/media/cec-pin.h b/include/media/cec-pin.h
index 88c8b016eb09..483bc4769fe9 100644
--- a/include/media/cec-pin.h
+++ b/include/media/cec-pin.h
@@ -13,7 +13,8 @@
 
 /**
  * struct cec_pin_ops - low-level CEC pin operations
- * @read:	read the CEC pin. Return true if high, false if low.
+ * @read:	read the CEC pin. Returns > 0 if high, 0 if low, or an error
+ *		if negative.
  * @low:	drive the CEC pin low.
  * @high:	stop driving the CEC pin. The pull-up will drive the pin
  *		high, unless someone else is driving the pin low.
@@ -22,13 +23,10 @@
  * @free:	optional. Free any allocated resources. Called when the
  *		adapter is deleted.
  * @status:	optional, log status information.
- * @read_hpd:	read the HPD pin. Return true if high, false if low or
- *		an error if negative. If NULL or -ENOTTY is returned,
- *		then this is not supported.
- * @read_5v:	read the 5V pin. Return true if high, false if low or
- *		an error if negative. If NULL or -ENOTTY is returned,
- *		then this is not supported.
- *
+ * @read_hpd:	optional. Read the HPD pin. Returns > 0 if high, 0 if low or
+ *		an error if negative.
+ * @read_5v:	optional. Read the 5V pin. Returns > 0 if high, 0 if low or
+ *		an error if negative.
  * @received:	optional. High-level CEC message callback. Allows the driver
  *		to process CEC messages.
  *
@@ -36,7 +34,7 @@
  * cec pin framework to manipulate the CEC pin.
  */
 struct cec_pin_ops {
-	bool (*read)(struct cec_adapter *adap);
+	int  (*read)(struct cec_adapter *adap);
 	void (*low)(struct cec_adapter *adap);
 	void (*high)(struct cec_adapter *adap);
 	bool (*enable_irq)(struct cec_adapter *adap);
diff --git a/include/media/dvb-usb-ids.h b/include/media/dvb-usb-ids.h
index 800d473b03c4..41f0bf122f53 100644
--- a/include/media/dvb-usb-ids.h
+++ b/include/media/dvb-usb-ids.h
@@ -96,7 +96,7 @@
 #define USB_PID_AFATECH_AF9035_9035			0x9035
 #define USB_PID_TREKSTOR_DVBT				0x901b
 #define USB_PID_TREKSTOR_TERRES_2_0			0xC803
-#define USB_VID_ALINK_DTU				0xf170
+#define USB_PID_ALINK_DTU				0xf170
 #define USB_PID_ANSONIC_DVBT_USB			0x6000
 #define USB_PID_ANYSEE					0x861f
 #define USB_PID_AZUREWAVE_AD_TU700			0x3237
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 1c6ff7d63bca..080fd1293c42 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -13,6 +13,12 @@
 
 #include <linux/videodev2.h>
 
+/*
+ * Maximum DPB size, as specified by section 'A.3.1 Level limits
+ * common to the Baseline, Main, and Extended profiles'.
+ */
+#define V4L2_H264_NUM_DPB_ENTRIES 16
+
 /* Our pixel format isn't stable at the moment */
 #define V4L2_PIX_FMT_H264_SLICE v4l2_fourcc('S', '2', '6', '4') /* H264 parsed slices */
 
@@ -201,7 +207,7 @@ struct v4l2_h264_dpb_entry {
 #define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC	0x01
 
 struct v4l2_ctrl_h264_decode_params {
-	struct v4l2_h264_dpb_entry dpb[16];
+	struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES];
 	__u16 num_slices;
 	__u16 nal_ref_idc;
 	__s32 top_field_order_cnt;
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 0ce896f10202..7dbb91c601a7 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -41,36 +41,85 @@
 #define RC_PROTO_BIT_RCMM32		BIT_ULL(RC_PROTO_RCMM32)
 #define RC_PROTO_BIT_XBOX_DVD		BIT_ULL(RC_PROTO_XBOX_DVD)
 
-/* All rc protocols for which we have decoders */
+#if IS_ENABLED(CONFIG_IR_RC5_DECODER)
+#define __RC_PROTO_RC5_CODEC \
+	(RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC5X_20 |  RC_PROTO_BIT_RC5_SZ)
+#else
+#define __RC_PROTO_RC5_CODEC 0
+#endif
+
+#if IS_ENABLED(CONFIG_IR_JVC_DECODER)
+#define __RC_PROTO_JVC_CODEC RC_PROTO_BIT_JVC
+#else
+#define __RC_PROTO_JVC_CODEC 0
+#endif
+#if IS_ENABLED(CONFIG_IR_SONY_DECODER)
+#define __RC_PROTO_SONY_CODEC \
+	(RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 |  RC_PROTO_BIT_SONY20)
+#else
+#define __RC_PROTO_SONY_CODEC 0
+#endif
+#if IS_ENABLED(CONFIG_IR_NEC_DECODER)
+#define __RC_PROTO_NEC_CODEC \
+	(RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32)
+#else
+#define __RC_PROTO_NEC_CODEC 0
+#endif
+#if IS_ENABLED(CONFIG_IR_SANYO_DECODER)
+#define __RC_PROTO_SANYO_CODEC RC_PROTO_BIT_SANYO
+#else
+#define __RC_PROTO_SANYO_CODEC 0
+#endif
+#if IS_ENABLED(CONFIG_IR_MCE_KBD_DECODER)
+#define __RC_PROTO_MCE_KBD_CODEC \
+	(RC_PROTO_BIT_MCIR2_KBD |  RC_PROTO_BIT_MCIR2_MSE)
+#else
+#define __RC_PROTO_MCE_KBD_CODEC 0
+#endif
+#if IS_ENABLED(CONFIG_IR_RC6_DECODER)
+#define __RC_PROTO_RC6_CODEC \
+	(RC_PROTO_BIT_RC6_0 | RC_PROTO_BIT_RC6_6A_20 | \
+	 RC_PROTO_BIT_RC6_6A_24 |  RC_PROTO_BIT_RC6_6A_32 | \
+	 RC_PROTO_BIT_RC6_MCE)
+#else
+#define __RC_PROTO_RC6_CODEC 0
+#endif
+#if IS_ENABLED(CONFIG_IR_SHARP_DECODER)
+#define __RC_PROTO_SHARP_CODEC RC_PROTO_BIT_SHARP
+#else
+#define __RC_PROTO_SHARP_CODEC 0
+#endif
+#if IS_ENABLED(CONFIG_IR_XMP_DECODER)
+#define __RC_PROTO_XMP_CODEC RC_PROTO_BIT_XMP
+#else
+#define __RC_PROTO_XMP_CODEC 0
+#endif
+#if IS_ENABLED(CONFIG_IR_IMON_DECODER)
+#define __RC_PROTO_IMON_CODEC RC_PROTO_BIT_IMON
+#else
+#define __RC_PROTO_IMON_CODEC 0
+#endif
+#if IS_ENABLED(CONFIG_IR_RCMM_DECODER)
+#define __RC_PROTO_RCMM_CODEC \
+	(RC_PROTO_BIT_RCMM12 | RC_PROTO_BIT_RCMM24 | RC_PROTO_BIT_RCMM32)
+#else
+#define __RC_PROTO_RCMM_CODEC 0
+#endif
+
+/* All kernel-based codecs have encoders and decoders */
 #define RC_PROTO_BIT_ALL_IR_DECODER \
-			(RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC5X_20 | \
-			 RC_PROTO_BIT_RC5_SZ | RC_PROTO_BIT_JVC | \
-			 RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 | \
-			 RC_PROTO_BIT_SONY20 | RC_PROTO_BIT_NEC | \
-			 RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32 | \
-			 RC_PROTO_BIT_SANYO | RC_PROTO_BIT_MCIR2_KBD | \
-			 RC_PROTO_BIT_MCIR2_MSE | \
-			 RC_PROTO_BIT_RC6_0 | RC_PROTO_BIT_RC6_6A_20 | \
-			 RC_PROTO_BIT_RC6_6A_24 |  RC_PROTO_BIT_RC6_6A_32 | \
-			 RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_SHARP | \
-			 RC_PROTO_BIT_XMP | RC_PROTO_BIT_IMON | \
-			 RC_PROTO_BIT_RCMM12 | RC_PROTO_BIT_RCMM24 | \
-			 RC_PROTO_BIT_RCMM32)
+	(__RC_PROTO_RC5_CODEC | __RC_PROTO_JVC_CODEC | __RC_PROTO_SONY_CODEC | \
+	 __RC_PROTO_NEC_CODEC | __RC_PROTO_SANYO_CODEC | \
+	 __RC_PROTO_MCE_KBD_CODEC | __RC_PROTO_RC6_CODEC | \
+	 __RC_PROTO_SHARP_CODEC | __RC_PROTO_XMP_CODEC | \
+	 __RC_PROTO_IMON_CODEC | __RC_PROTO_RCMM_CODEC)
 
 #define RC_PROTO_BIT_ALL_IR_ENCODER \
-			(RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC5X_20 | \
-			 RC_PROTO_BIT_RC5_SZ | RC_PROTO_BIT_JVC | \
-			 RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 | \
-			 RC_PROTO_BIT_SONY20 |  RC_PROTO_BIT_NEC | \
-			 RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32 | \
-			 RC_PROTO_BIT_SANYO | RC_PROTO_BIT_MCIR2_KBD | \
-			 RC_PROTO_BIT_MCIR2_MSE | \
-			 RC_PROTO_BIT_RC6_0 | RC_PROTO_BIT_RC6_6A_20 | \
-			 RC_PROTO_BIT_RC6_6A_24 | \
-			 RC_PROTO_BIT_RC6_6A_32 | RC_PROTO_BIT_RC6_MCE | \
-			 RC_PROTO_BIT_SHARP | RC_PROTO_BIT_IMON | \
-			 RC_PROTO_BIT_RCMM12 | RC_PROTO_BIT_RCMM24 | \
-			 RC_PROTO_BIT_RCMM32)
+	(__RC_PROTO_RC5_CODEC | __RC_PROTO_JVC_CODEC | __RC_PROTO_SONY_CODEC | \
+	 __RC_PROTO_NEC_CODEC | __RC_PROTO_SANYO_CODEC | \
+	 __RC_PROTO_MCE_KBD_CODEC | __RC_PROTO_RC6_CODEC | \
+	 __RC_PROTO_SHARP_CODEC | __RC_PROTO_XMP_CODEC | \
+	 __RC_PROTO_IMON_CODEC | __RC_PROTO_RCMM_CODEC)
 
 #define RC_SCANCODE_UNKNOWN(x)			(x)
 #define RC_SCANCODE_OTHER(x)			(x)
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 7db9e719a583..757a713bad41 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -685,7 +685,9 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(struct v4l2_ctrl_handler *hdl,
  * @p_def:     The control's default value.
  *
  * Sames as v4l2_ctrl_new_std(), but with support to compound controls, thanks
- * to the @p_def field.
+ * to the @p_def field. Use v4l2_ctrl_ptr_create() to create @p_def from a
+ * pointer. Use v4l2_ctrl_ptr_create(NULL) if the default value of the
+ * compound control should be all zeroes.
  *
  */
 struct v4l2_ctrl *v4l2_ctrl_new_std_compound(struct v4l2_ctrl_handler *hdl,
@@ -1113,45 +1115,54 @@ static inline int v4l2_ctrl_s_ctrl_string(struct v4l2_ctrl *ctrl, const char *s)
 }
 
 /**
- * __v4l2_ctrl_s_ctrl_area() - Unlocked variant of v4l2_ctrl_s_ctrl_area().
+ * __v4l2_ctrl_s_ctrl_compound() - Unlocked variant to set a compound control
  *
- * @ctrl:	The control.
- * @area:	The new area.
+ * @ctrl: The control.
+ * @type: The type of the data.
+ * @p:    The new compound payload.
  *
- * This sets the control's new area safely by going through the control
- * framework. This function assumes the control's handler is already locked,
- * allowing it to be used from within the &v4l2_ctrl_ops functions.
+ * This sets the control's new compound payload safely by going through the
+ * control framework. This function assumes the control's handler is already
+ * locked, allowing it to be used from within the &v4l2_ctrl_ops functions.
  *
- * This function is for area type controls only.
+ * This function is for compound type controls only.
  */
-int __v4l2_ctrl_s_ctrl_area(struct v4l2_ctrl *ctrl,
-			    const struct v4l2_area *area);
+int __v4l2_ctrl_s_ctrl_compound(struct v4l2_ctrl *ctrl,
+				enum v4l2_ctrl_type type, const void *p);
 
 /**
- * v4l2_ctrl_s_ctrl_area() - Helper function to set a control's area value
- *	 from within a driver.
+ * v4l2_ctrl_s_ctrl_compound() - Helper function to set a compound control
+ *	from within a driver.
  *
- * @ctrl:	The control.
- * @area:	The new area.
+ * @ctrl: The control.
+ * @type: The type of the data.
+ * @p:    The new compound payload.
  *
- * This sets the control's new area safely by going through the control
- * framework. This function will lock the control's handler, so it cannot be
- * used from within the &v4l2_ctrl_ops functions.
+ * This sets the control's new compound payload safely by going through the
+ * control framework. This function will lock the control's handler, so it
+ * cannot be used from within the &v4l2_ctrl_ops functions.
  *
- * This function is for area type controls only.
+ * This function is for compound type controls only.
  */
-static inline int v4l2_ctrl_s_ctrl_area(struct v4l2_ctrl *ctrl,
-					const struct v4l2_area *area)
+static inline int v4l2_ctrl_s_ctrl_compound(struct v4l2_ctrl *ctrl,
+					    enum v4l2_ctrl_type type,
+					    const void *p)
 {
 	int rval;
 
 	v4l2_ctrl_lock(ctrl);
-	rval = __v4l2_ctrl_s_ctrl_area(ctrl, area);
+	rval = __v4l2_ctrl_s_ctrl_compound(ctrl, type, p);
 	v4l2_ctrl_unlock(ctrl);
 
 	return rval;
 }
 
+/* Helper defines for area type controls */
+#define __v4l2_ctrl_s_ctrl_area(ctrl, area) \
+	__v4l2_ctrl_s_ctrl_compound((ctrl), V4L2_CTRL_TYPE_AREA, (area))
+#define v4l2_ctrl_s_ctrl_area(ctrl, area) \
+	v4l2_ctrl_s_ctrl_compound((ctrl), V4L2_CTRL_TYPE_AREA, (area))
+
 /* Internal helper functions that deal with control events. */
 extern const struct v4l2_subscribed_event_ops v4l2_ctrl_sub_ev_ops;
 
diff --git a/include/media/v4l2-fh.h b/include/media/v4l2-fh.h
index 53b4dbb4ae8e..b5b3e00c8e6a 100644
--- a/include/media/v4l2-fh.h
+++ b/include/media/v4l2-fh.h
@@ -53,9 +53,7 @@ struct v4l2_fh {
 	unsigned int		navailable;
 	u32			sequence;
 
-#if IS_ENABLED(CONFIG_V4L2_MEM2MEM_DEV)
 	struct v4l2_m2m_ctx	*m2m_ctx;
-#endif
 };
 
 /**
diff --git a/include/media/v4l2-h264.h b/include/media/v4l2-h264.h
new file mode 100644
index 000000000000..bc9ebb560ccf
--- /dev/null
+++ b/include/media/v4l2-h264.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Helper functions for H264 codecs.
+ *
+ * Copyright (c) 2019 Collabora, Ltd.
+ *
+ * Author: Boris Brezillon <boris.brezillon@collabora.com>
+ */
+
+#ifndef _MEDIA_V4L2_H264_H
+#define _MEDIA_V4L2_H264_H
+
+#include <media/h264-ctrls.h>
+
+/**
+ * struct v4l2_h264_reflist_builder - Reference list builder object
+ *
+ * @refs.pic_order_count: reference picture order count
+ * @refs.frame_num: reference frame number
+ * @refs.pic_num: reference picture number
+ * @refs.longterm: set to true for a long term reference
+ * @refs: array of references
+ * @cur_pic_order_count: picture order count of the frame being decoded
+ * @unordered_reflist: unordered list of references. Will be used to generate
+ *		       ordered P/B0/B1 lists
+ * @num_valid: number of valid references in the refs array
+ *
+ * This object stores the context of the P/B0/B1 reference list builder.
+ * This procedure is described in section '8.2.4 Decoding process for reference
+ * picture lists construction' of the H264 spec.
+ */
+struct v4l2_h264_reflist_builder {
+	struct {
+		s32 pic_order_count;
+		int frame_num;
+		u16 pic_num;
+		u16 longterm : 1;
+	} refs[V4L2_H264_NUM_DPB_ENTRIES];
+	s32 cur_pic_order_count;
+	u8 unordered_reflist[V4L2_H264_NUM_DPB_ENTRIES];
+	u8 num_valid;
+};
+
+void
+v4l2_h264_init_reflist_builder(struct v4l2_h264_reflist_builder *b,
+		const struct v4l2_ctrl_h264_decode_params *dec_params,
+		const struct v4l2_ctrl_h264_slice_params *slice_params,
+		const struct v4l2_ctrl_h264_sps *sps,
+		const struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES]);
+
+/**
+ * v4l2_h264_build_b_ref_lists() - Build the B0/B1 reference lists
+ *
+ * @builder: reference list builder context
+ * @b0_reflist: 16-bytes array used to store the B0 reference list. Each entry
+ *		is an index in the DPB
+ * @b1_reflist: 16-bytes array used to store the B1 reference list. Each entry
+ *		is an index in the DPB
+ *
+ * This functions builds the B0/B1 reference lists. This procedure is described
+ * in section '8.2.4 Decoding process for reference picture lists construction'
+ * of the H264 spec. This function can be used by H264 decoder drivers that
+ * need to pass B0/B1 reference lists to the hardware.
+ */
+void
+v4l2_h264_build_b_ref_lists(const struct v4l2_h264_reflist_builder *builder,
+			    u8 *b0_reflist, u8 *b1_reflist);
+
+/**
+ * v4l2_h264_build_b_ref_lists() - Build the P reference list
+ *
+ * @builder: reference list builder context
+ * @p_reflist: 16-bytes array used to store the P reference list. Each entry
+ *	       is an index in the DPB
+ *
+ * This functions builds the P reference lists. This procedure is describe in
+ * section '8.2.4 Decoding process for reference picture lists construction'
+ * of the H264 spec. This function can be used by H264 decoder drivers that
+ * need to pass a P reference list to the hardware.
+ */
+void
+v4l2_h264_build_p_ref_list(const struct v4l2_h264_reflist_builder *builder,
+			   u8 *reflist);
+
+#endif /* _MEDIA_V4L2_H264_H */
diff --git a/include/media/v4l2-image-sizes.h b/include/media/v4l2-image-sizes.h
index 450f4f5d3d6a..24a7a0bb59ab 100644
--- a/include/media/v4l2-image-sizes.h
+++ b/include/media/v4l2-image-sizes.h
@@ -10,6 +10,12 @@
 #define CIF_WIDTH	352
 #define CIF_HEIGHT	288
 
+#define HD_720_WIDTH	1280
+#define HD_720_HEIGHT	720
+
+#define HD_1080_WIDTH	1920
+#define HD_1080_HEIGHT	1080
+
 #define QCIF_WIDTH	176
 #define QCIF_HEIGHT	144
 
diff --git a/include/media/v4l2-jpeg.h b/include/media/v4l2-jpeg.h
new file mode 100644
index 000000000000..ddba2a56c321
--- /dev/null
+++ b/include/media/v4l2-jpeg.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * V4L2 JPEG helpers header
+ *
+ * Copyright (C) 2019 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
+ *
+ * For reference, see JPEG ITU-T.81 (ISO/IEC 10918-1)
+ */
+
+#ifndef _V4L2_JPEG_H
+#define _V4L2_JPEG_H
+
+#include <linux/v4l2-controls.h>
+
+#define V4L2_JPEG_MAX_COMPONENTS	4
+#define V4L2_JPEG_MAX_TABLES		4
+
+/**
+ * struct v4l2_jpeg_reference - reference into the JPEG buffer
+ * @start: pointer to the start of the referenced segment or table
+ * @length: size of the referenced segment or table
+ *
+ * Wnen referencing marker segments, start points right after the marker code,
+ * and length is the size of the segment parameters, excluding the marker code.
+ */
+struct v4l2_jpeg_reference {
+	u8 *start;
+	size_t length;
+};
+
+/* B.2.2 Frame header syntax */
+
+/**
+ * struct v4l2_jpeg_frame_component_spec - frame component-specification
+ * @component_identifier: C[i]
+ * @horizontal_sampling_factor: H[i]
+ * @vertical_sampling_factor: V[i]
+ * @quantization_table_selector: quantization table destination selector Tq[i]
+ */
+struct v4l2_jpeg_frame_component_spec {
+	u8 component_identifier;
+	u8 horizontal_sampling_factor;
+	u8 vertical_sampling_factor;
+	u8 quantization_table_selector;
+};
+
+/**
+ * struct v4l2_jpeg_frame_header - JPEG frame header
+ * @height: Y
+ * @width: X
+ * @precision: P
+ * @num_components: Nf
+ * @component: component-specification, see v4l2_jpeg_frame_component_spec
+ * @subsampling: decoded subsampling from component-specification
+ */
+struct v4l2_jpeg_frame_header {
+	u16 height;
+	u16 width;
+	u8 precision;
+	u8 num_components;
+	struct v4l2_jpeg_frame_component_spec component[V4L2_JPEG_MAX_COMPONENTS];
+	enum v4l2_jpeg_chroma_subsampling subsampling;
+};
+
+/* B.2.3 Scan header syntax */
+
+/**
+ * struct v4l2_jpeg_scan_component_spec - scan component-specification
+ * @component_selector: Cs[j]
+ * @dc_entropy_coding_table_selector: Td[j]
+ * @ac_entropy_coding_table_selector: Ta[j]
+ */
+struct v4l2_jpeg_scan_component_spec {
+	u8 component_selector;
+	u8 dc_entropy_coding_table_selector;
+	u8 ac_entropy_coding_table_selector;
+};
+
+/**
+ * struct v4l2_jpeg_scan_header - JPEG scan header
+ * @num_components: Ns
+ * @component: component-specification, see v4l2_jpeg_scan_component_spec
+ */
+struct v4l2_jpeg_scan_header {
+	u8 num_components;				/* Ns */
+	struct v4l2_jpeg_scan_component_spec component[V4L2_JPEG_MAX_COMPONENTS];
+	/* Ss, Se, Ah, and Al are not used by any driver */
+};
+
+/**
+ * struct v4l2_jpeg_header - parsed JPEG header
+ * @sof: pointer to frame header and size
+ * @sos: pointer to scan header and size
+ * @dht: pointers to huffman tables and sizes
+ * @dqt: pointers to quantization tables and sizes
+ * @frame: parsed frame header
+ * @scan: pointer to parsed scan header, optional
+ * @quantization_tables: references to four quantization tables, optional
+ * @huffman_tables: references to four Huffman tables in DC0, DC1, AC0, AC1
+ *                  order, optional
+ * @restart_interval: number of MCU per restart interval, Ri
+ * @ecs_offset: buffer offset in bytes to the entropy coded segment
+ *
+ * When this structure is passed to v4l2_jpeg_parse_header, the optional scan,
+ * quantization_tables, and huffman_tables pointers must be initialized to NULL
+ * or point at valid memory.
+ */
+struct v4l2_jpeg_header {
+	struct v4l2_jpeg_reference sof;
+	struct v4l2_jpeg_reference sos;
+	unsigned int num_dht;
+	struct v4l2_jpeg_reference dht[V4L2_JPEG_MAX_TABLES];
+	unsigned int num_dqt;
+	struct v4l2_jpeg_reference dqt[V4L2_JPEG_MAX_TABLES];
+
+	struct v4l2_jpeg_frame_header frame;
+	struct v4l2_jpeg_scan_header *scan;
+	struct v4l2_jpeg_reference *quantization_tables;
+	struct v4l2_jpeg_reference *huffman_tables;
+	u16 restart_interval;
+	size_t ecs_offset;
+};
+
+int v4l2_jpeg_parse_header(void *buf, size_t len, struct v4l2_jpeg_header *out);
+
+int v4l2_jpeg_parse_frame_header(void *buf, size_t len,
+				 struct v4l2_jpeg_frame_header *frame_header);
+int v4l2_jpeg_parse_scan_header(void *buf, size_t len,
+				struct v4l2_jpeg_scan_header *scan_header);
+int v4l2_jpeg_parse_quantization_tables(void *buf, size_t len, u8 precision,
+					struct v4l2_jpeg_reference *q_tables);
+int v4l2_jpeg_parse_huffman_tables(void *buf, size_t len,
+				   struct v4l2_jpeg_reference *huffman_tables);
+
+#endif
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index e0eabe58aa8b..fdb07105384c 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -6,8 +6,6 @@
 #define RTR_SOLICITATION_INTERVAL	(4*HZ)
 #define RTR_SOLICITATION_MAX_INTERVAL	(3600*HZ)	/* 1 hour */
 
-#define MIN_VALID_LIFETIME		(2*3600)	/* 2 hours */
-
 #define TEMP_VALID_LIFETIME		(7*86400)
 #define TEMP_PREFERRED_LIFETIME		(86400)
 #define REGEN_MAX_RETRY			(3)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 1576353a2773..3fa7b1e3c5d9 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -139,6 +139,14 @@ struct bt_voice {
 #define BT_PHY_LE_CODED_TX	0x00002000
 #define BT_PHY_LE_CODED_RX	0x00004000
 
+#define BT_MODE			15
+
+#define BT_MODE_BASIC		0x00
+#define BT_MODE_ERTM		0x01
+#define BT_MODE_STREAMING	0x02
+#define BT_MODE_LE_FLOWCTL	0x03
+#define BT_MODE_EXT_FLOWCTL	0x04
+
 __printf(1, 2)
 void bt_info(const char *fmt, ...);
 __printf(1, 2)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 5f60e135aeb6..e5bc1dfe809a 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -53,6 +53,9 @@
 #define HCI_NOTIFY_CONN_ADD		1
 #define HCI_NOTIFY_CONN_DEL		2
 #define HCI_NOTIFY_VOICE_SETTING	3
+#define HCI_NOTIFY_ENABLE_SCO_CVSD	4
+#define HCI_NOTIFY_ENABLE_SCO_TRANSP	5
+#define HCI_NOTIFY_DISABLE_SCO		6
 
 /* HCI bus types */
 #define HCI_VIRTUAL	0
@@ -65,6 +68,7 @@
 #define HCI_SPI		7
 #define HCI_I2C		8
 #define HCI_SMD		9
+#define HCI_VIRTIO	10
 
 /* HCI controller types */
 #define HCI_PRIMARY	0x00
@@ -214,6 +218,15 @@ enum {
 	 * This quirk must be set before hci_register_dev is called.
 	 */
 	HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
+
+	/* When this quirk is set, the controller has validated that
+	 * LE states reported through the HCI_LE_READ_SUPPORTED_STATES are
+	 * valid.  This mechanism is necessary as many controllers have
+	 * been seen has having trouble initiating a connectable
+	 * advertisement despite the state combination being reported as
+	 * supported.
+	 */
+	HCI_QUIRK_VALID_LE_STATES,
 };
 
 /* HCI device flags */
@@ -294,6 +307,7 @@ enum {
 	HCI_FORCE_STATIC_ADDR,
 	HCI_LL_RPA_RESOLUTION,
 	HCI_CMD_PENDING,
+	HCI_FORCE_NO_MITM,
 
 	__HCI_NUM_FLAGS,
 };
@@ -455,12 +469,11 @@ enum {
 #define HCI_LE_SLAVE_FEATURES		0x08
 #define HCI_LE_PING			0x10
 #define HCI_LE_DATA_LEN_EXT		0x20
-#define HCI_LE_PHY_2M			0x01
-#define HCI_LE_PHY_CODED		0x08
-#define HCI_LE_EXT_ADV			0x10
+#define HCI_LE_LL_PRIVACY		0x40
 #define HCI_LE_EXT_SCAN_POLICY		0x80
 #define HCI_LE_PHY_2M			0x01
 #define HCI_LE_PHY_CODED		0x08
+#define HCI_LE_EXT_ADV			0x10
 #define HCI_LE_CHAN_SEL_ALG2		0x40
 #define HCI_LE_CIS_MASTER		0x10
 #define HCI_LE_CIS_SLAVE		0x20
@@ -1272,6 +1285,13 @@ struct hci_rp_read_data_block_size {
 
 #define HCI_OP_READ_LOCAL_CODECS	0x100b
 
+#define HCI_OP_READ_LOCAL_PAIRING_OPTS	0x100c
+struct hci_rp_read_local_pairing_opts {
+	__u8     status;
+	__u8     pairing_opts;
+	__u8     max_key_size;
+} __packed;
+
 #define HCI_OP_READ_PAGE_SCAN_ACTIVITY	0x0c1b
 struct hci_rp_read_page_scan_activity {
 	__u8     status;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index d4e28773d378..239ab72f16c6 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -312,6 +312,8 @@ struct hci_dev {
 	__u16		conn_info_max_age;
 	__u16		auth_payload_timeout;
 	__u8		min_enc_key_size;
+	__u8		max_enc_key_size;
+	__u8		pairing_opts;
 	__u8		ssp_debug_mode;
 	__u8		hw_error_code;
 	__u32		clock;
@@ -484,6 +486,11 @@ struct hci_dev {
 	struct led_trigger	*power_led;
 #endif
 
+#if IS_ENABLED(CONFIG_BT_MSFTEXT)
+	__u16			msft_opcode;
+	void			*msft_data;
+#endif
+
 	int (*open)(struct hci_dev *hdev);
 	int (*close)(struct hci_dev *hdev);
 	int (*flush)(struct hci_dev *hdev);
@@ -638,6 +645,7 @@ extern struct mutex hci_cb_list_lock;
 	do {							\
 		hci_dev_clear_flag(hdev, HCI_LE_SCAN);		\
 		hci_dev_clear_flag(hdev, HCI_LE_ADV);		\
+		hci_dev_clear_flag(hdev, HCI_LL_RPA_RESOLUTION);\
 		hci_dev_clear_flag(hdev, HCI_PERIODIC_INQ);	\
 	} while (0)
 
@@ -1116,6 +1124,14 @@ int hci_recv_frame(struct hci_dev *hdev, struct sk_buff *skb);
 int hci_recv_diag(struct hci_dev *hdev, struct sk_buff *skb);
 __printf(2, 3) void hci_set_hw_info(struct hci_dev *hdev, const char *fmt, ...);
 __printf(2, 3) void hci_set_fw_info(struct hci_dev *hdev, const char *fmt, ...);
+
+static inline void hci_set_msft_opcode(struct hci_dev *hdev, __u16 opcode)
+{
+#if IS_ENABLED(CONFIG_BT_MSFTEXT)
+	hdev->msft_opcode = opcode;
+#endif
+}
+
 int hci_dev_open(__u16 dev);
 int hci_dev_close(__u16 dev);
 int hci_dev_do_close(struct hci_dev *hdev);
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index dada14d0622c..8f1e6a7a2df8 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -499,7 +499,7 @@ struct l2cap_ecred_conn_req {
 	__le16 mtu;
 	__le16 mps;
 	__le16 credits;
-	__le16 scid[0];
+	__le16 scid[];
 } __packed;
 
 struct l2cap_ecred_conn_rsp {
@@ -507,13 +507,13 @@ struct l2cap_ecred_conn_rsp {
 	__le16 mps;
 	__le16 credits;
 	__le16 result;
-	__le16 dcid[0];
+	__le16 dcid[];
 };
 
 struct l2cap_ecred_reconf_req {
 	__le16 mtu;
 	__le16 mps;
-	__le16 scid[0];
+	__le16 scid[];
 } __packed;
 
 #define L2CAP_RECONF_SUCCESS		0x0000
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
index f41cd87550dc..3303d4bc00cf 100644
--- a/include/net/bluetooth/mgmt.h
+++ b/include/net/bluetooth/mgmt.h
@@ -70,14 +70,14 @@ struct mgmt_rp_read_version {
 struct mgmt_rp_read_commands {
 	__le16	num_commands;
 	__le16	num_events;
-	__le16	opcodes[0];
+	__le16	opcodes[];
 } __packed;
 
 #define MGMT_OP_READ_INDEX_LIST		0x0003
 #define MGMT_READ_INDEX_LIST_SIZE	0
 struct mgmt_rp_read_index_list {
 	__le16	num_controllers;
-	__le16	index[0];
+	__le16	index[];
 } __packed;
 
 /* Reserve one extra byte for names in management messages so that they
@@ -183,7 +183,7 @@ struct mgmt_link_key_info {
 struct mgmt_cp_load_link_keys {
 	__u8	debug_keys;
 	__le16	key_count;
-	struct	mgmt_link_key_info keys[0];
+	struct	mgmt_link_key_info keys[];
 } __packed;
 #define MGMT_LOAD_LINK_KEYS_SIZE	3
 
@@ -206,7 +206,7 @@ struct mgmt_ltk_info {
 #define MGMT_OP_LOAD_LONG_TERM_KEYS	0x0013
 struct mgmt_cp_load_long_term_keys {
 	__le16	key_count;
-	struct	mgmt_ltk_info keys[0];
+	struct	mgmt_ltk_info keys[];
 } __packed;
 #define MGMT_LOAD_LONG_TERM_KEYS_SIZE	2
 
@@ -223,7 +223,7 @@ struct mgmt_rp_disconnect {
 #define MGMT_GET_CONNECTIONS_SIZE	0
 struct mgmt_rp_get_connections {
 	__le16 conn_count;
-	struct mgmt_addr_info addr[0];
+	struct mgmt_addr_info addr[];
 } __packed;
 
 #define MGMT_OP_PIN_CODE_REPLY		0x0016
@@ -413,7 +413,7 @@ struct mgmt_irk_info {
 #define MGMT_OP_LOAD_IRKS		0x0030
 struct mgmt_cp_load_irks {
 	__le16 irk_count;
-	struct mgmt_irk_info irks[0];
+	struct mgmt_irk_info irks[];
 } __packed;
 #define MGMT_LOAD_IRKS_SIZE		2
 
@@ -465,7 +465,7 @@ struct mgmt_conn_param {
 #define MGMT_OP_LOAD_CONN_PARAM		0x0035
 struct mgmt_cp_load_conn_param {
 	__le16 param_count;
-	struct mgmt_conn_param params[0];
+	struct mgmt_conn_param params[];
 } __packed;
 #define MGMT_LOAD_CONN_PARAM_SIZE	2
 
@@ -473,7 +473,7 @@ struct mgmt_cp_load_conn_param {
 #define MGMT_READ_UNCONF_INDEX_LIST_SIZE 0
 struct mgmt_rp_read_unconf_index_list {
 	__le16	num_controllers;
-	__le16	index[0];
+	__le16	index[];
 } __packed;
 
 #define MGMT_OPTION_EXTERNAL_CONFIG	0x00000001
@@ -504,7 +504,7 @@ struct mgmt_cp_start_service_discovery {
 	__u8 type;
 	__s8 rssi;
 	__le16 uuid_count;
-	__u8 uuids[0][16];
+	__u8 uuids[][16];
 } __packed;
 #define MGMT_START_SERVICE_DISCOVERY_SIZE 4
 
@@ -516,7 +516,7 @@ struct mgmt_cp_read_local_oob_ext_data {
 struct mgmt_rp_read_local_oob_ext_data {
 	__u8    type;
 	__le16	eir_len;
-	__u8	eir[0];
+	__u8	eir[];
 } __packed;
 
 #define MGMT_OP_READ_EXT_INDEX_LIST	0x003C
@@ -527,7 +527,7 @@ struct mgmt_rp_read_ext_index_list {
 		__le16 index;
 		__u8   type;
 		__u8   bus;
-	} entry[0];
+	} entry[];
 } __packed;
 
 #define MGMT_OP_READ_ADV_FEATURES	0x0003D
@@ -538,7 +538,7 @@ struct mgmt_rp_read_adv_features {
 	__u8   max_scan_rsp_len;
 	__u8   max_instances;
 	__u8   num_instances;
-	__u8   instance[0];
+	__u8   instance[];
 } __packed;
 
 #define MGMT_OP_ADD_ADVERTISING		0x003E
@@ -549,7 +549,7 @@ struct mgmt_cp_add_advertising {
 	__le16	timeout;
 	__u8	adv_data_len;
 	__u8	scan_rsp_len;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 #define MGMT_ADD_ADVERTISING_SIZE	11
 struct mgmt_rp_add_advertising {
@@ -603,7 +603,7 @@ struct mgmt_rp_read_ext_info {
 	__le32   supported_settings;
 	__le32   current_settings;
 	__le16   eir_len;
-	__u8     eir[0];
+	__u8     eir[];
 } __packed;
 
 #define MGMT_OP_SET_APPEARANCE		0x0043
@@ -668,17 +668,24 @@ struct mgmt_blocked_key_info {
 
 struct mgmt_cp_set_blocked_keys {
 	__le16 key_count;
-	struct mgmt_blocked_key_info keys[0];
+	struct mgmt_blocked_key_info keys[];
 } __packed;
 #define MGMT_OP_SET_BLOCKED_KEYS_SIZE 2
 
 #define MGMT_OP_SET_WIDEBAND_SPEECH	0x0047
 
+#define MGMT_OP_READ_SECURITY_INFO	0x0048
+#define MGMT_READ_SECURITY_INFO_SIZE	0
+struct mgmt_rp_read_security_info {
+	__le16   sec_len;
+	__u8     sec[0];
+} __packed;
+
 #define MGMT_EV_CMD_COMPLETE		0x0001
 struct mgmt_ev_cmd_complete {
 	__le16	opcode;
 	__u8	status;
-	__u8	data[0];
+	__u8	data[];
 } __packed;
 
 #define MGMT_EV_CMD_STATUS		0x0002
@@ -726,7 +733,7 @@ struct mgmt_ev_device_connected {
 	struct mgmt_addr_info addr;
 	__le32	flags;
 	__le16	eir_len;
-	__u8	eir[0];
+	__u8	eir[];
 } __packed;
 
 #define MGMT_DEV_DISCONN_UNKNOWN	0x00
@@ -781,7 +788,7 @@ struct mgmt_ev_device_found {
 	__s8	rssi;
 	__le32	flags;
 	__le16	eir_len;
-	__u8	eir[0];
+	__u8	eir[];
 } __packed;
 
 #define MGMT_EV_DISCOVERING		0x0013
@@ -876,7 +883,7 @@ struct mgmt_ev_ext_index {
 struct mgmt_ev_local_oob_data_updated {
 	__u8    type;
 	__le16	eir_len;
-	__u8	eir[0];
+	__u8	eir[];
 } __packed;
 
 #define MGMT_EV_ADVERTISING_ADDED	0x0023
@@ -892,7 +899,7 @@ struct mgmt_ev_advertising_removed {
 #define MGMT_EV_EXT_INFO_CHANGED	0x0025
 struct mgmt_ev_ext_info_changed {
 	__le16	eir_len;
-	__u8	eir[0];
+	__u8	eir[];
 } __packed;
 
 #define MGMT_EV_PHY_CONFIGURATION_CHANGED	0x0026
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 70e48f66dac8..e67897fabacd 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -128,6 +128,7 @@ enum ieee80211_channel_flags {
  * with cfg80211.
  *
  * @center_freq: center frequency in MHz
+ * @freq_offset: offset from @center_freq, in KHz
  * @hw_value: hardware-specific value for the channel
  * @flags: channel flags from &enum ieee80211_channel_flags.
  * @orig_flags: channel flags at registration time, used by regulatory
@@ -149,6 +150,7 @@ enum ieee80211_channel_flags {
 struct ieee80211_channel {
 	enum nl80211_band band;
 	u32 center_freq;
+	u16 freq_offset;
 	u16 hw_value;
 	u32 flags;
 	int max_antenna_gain;
@@ -617,6 +619,7 @@ struct key_params {
  *	If edmg is requested (i.e. the .channels member is non-zero),
  *	chan will define the primary channel and all other
  *	parameters are ignored.
+ * @freq1_offset: offset from @center_freq1, in KHz
  */
 struct cfg80211_chan_def {
 	struct ieee80211_channel *chan;
@@ -624,6 +627,7 @@ struct cfg80211_chan_def {
 	u32 center_freq1;
 	u32 center_freq2;
 	struct ieee80211_edmg edmg;
+	u16 freq1_offset;
 };
 
 /**
@@ -713,6 +717,7 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1,
 	return (chandef1->chan == chandef2->chan &&
 		chandef1->width == chandef2->width &&
 		chandef1->center_freq1 == chandef2->center_freq1 &&
+		chandef1->freq1_offset == chandef2->freq1_offset &&
 		chandef1->center_freq2 == chandef2->center_freq2);
 }
 
@@ -1054,6 +1059,7 @@ enum cfg80211_ap_settings_flags {
  * @ht_required: stations must support HT
  * @vht_required: stations must support VHT
  * @twt_responder: Enable Target Wait Time
+ * @he_required: stations must support HE
  * @flags: flags, as defined in enum cfg80211_ap_settings_flags
  * @he_obss_pd: OBSS Packet Detection settings
  * @he_bss_color: BSS Color settings
@@ -1083,7 +1089,7 @@ struct cfg80211_ap_settings {
 	const struct ieee80211_vht_cap *vht_cap;
 	const struct ieee80211_he_cap_elem *he_cap;
 	const struct ieee80211_he_operation *he_oper;
-	bool ht_required, vht_required;
+	bool ht_required, vht_required, he_required;
 	bool twt_responder;
 	u32 flags;
 	struct ieee80211_he_obss_pd he_obss_pd;
@@ -2029,7 +2035,7 @@ struct cfg80211_scan_request {
 	bool no_cck;
 
 	/* keep last */
-	struct ieee80211_channel *channels[0];
+	struct ieee80211_channel *channels[];
 };
 
 static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask)
@@ -2175,7 +2181,7 @@ struct cfg80211_sched_scan_request {
 	struct list_head list;
 
 	/* keep last */
-	struct ieee80211_channel *channels[0];
+	struct ieee80211_channel *channels[];
 };
 
 /**
@@ -2297,7 +2303,7 @@ struct cfg80211_bss {
 	u8 bssid_index;
 	u8 max_bssid_indicator;
 
-	u8 priv[0] __aligned(sizeof(void *));
+	u8 priv[] __aligned(sizeof(void *));
 };
 
 /**
@@ -3384,6 +3390,21 @@ struct cfg80211_update_owe_info {
 	size_t ie_len;
 };
 
+/**
+ * struct mgmt_frame_regs - management frame registrations data
+ * @global_stypes: bitmap of management frame subtypes registered
+ *	for the entire device
+ * @interface_stypes: bitmap of management frame subtypes registered
+ *	for the given interface
+ * @global_mcast_rx: mcast RX is needed globally for these subtypes
+ * @interface_mcast_stypes: mcast RX is needed on this interface
+ *	for these subtypes
+ */
+struct mgmt_frame_regs {
+	u32 global_stypes, interface_stypes;
+	u32 global_mcast_stypes, interface_mcast_stypes;
+};
+
 /**
  * struct cfg80211_ops - backend description for wireless configuration
  *
@@ -3608,8 +3629,8 @@ struct cfg80211_update_owe_info {
  *	The driver should not call cfg80211_sched_scan_stopped() for a requested
  *	stop (when this method returns 0).
  *
- * @mgmt_frame_register: Notify driver that a management frame type was
- *	registered. The callback is allowed to sleep.
+ * @update_mgmt_frame_registrations: Notify the driver that management frame
+ *	registrations were updated. The callback is allowed to sleep.
  *
  * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
  *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
@@ -3932,9 +3953,9 @@ struct cfg80211_ops {
 				      struct net_device *dev,
 				      u32 rate, u32 pkts, u32 intvl);
 
-	void	(*mgmt_frame_register)(struct wiphy *wiphy,
-				       struct wireless_dev *wdev,
-				       u16 frame_type, bool reg);
+	void	(*update_mgmt_frame_registrations)(struct wiphy *wiphy,
+						   struct wireless_dev *wdev,
+						   struct mgmt_frame_regs *upd);
 
 	int	(*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
 	int	(*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
@@ -4829,7 +4850,7 @@ struct wiphy {
 
 	u8 max_data_retry_count;
 
-	char priv[0] __aligned(NETDEV_ALIGN);
+	char priv[] __aligned(NETDEV_ALIGN);
 };
 
 static inline struct net *wiphy_net(struct wiphy *wiphy)
@@ -5015,6 +5036,7 @@ struct cfg80211_cqm_config;
  *	by cfg80211 on change_interface
  * @mgmt_registrations: list of registrations for management frames
  * @mgmt_registrations_lock: lock for the list
+ * @mgmt_registrations_update_wk: update work to defer from atomic context
  * @mtx: mutex used to lock data in this struct, may be used by drivers
  *	and some API functions require it held
  * @beacon_interval: beacon interval used on this device for transmitting
@@ -5045,6 +5067,8 @@ struct cfg80211_cqm_config;
  * @pmsr_list: (private) peer measurement requests
  * @pmsr_lock: (private) peer measurements requests/results lock
  * @pmsr_free_wk: (private) peer measurements cleanup work
+ * @unprot_beacon_reported: (private) timestamp of last
+ *	unprotected beacon report
  */
 struct wireless_dev {
 	struct wiphy *wiphy;
@@ -5058,6 +5082,7 @@ struct wireless_dev {
 
 	struct list_head mgmt_registrations;
 	spinlock_t mgmt_registrations_lock;
+	struct work_struct mgmt_registrations_update_wk;
 
 	struct mutex mtx;
 
@@ -5121,6 +5146,8 @@ struct wireless_dev {
 	struct list_head pmsr_list;
 	spinlock_t pmsr_lock;
 	struct work_struct pmsr_free_wk;
+
+	unsigned long unprot_beacon_reported;
 };
 
 static inline u8 *wdev_address(struct wireless_dev *wdev)
@@ -5155,30 +5182,92 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
  * cfg80211 offers a number of utility functions that can be useful.
  */
 
+/**
+ * ieee80211_channel_equal - compare two struct ieee80211_channel
+ *
+ * @a: 1st struct ieee80211_channel
+ * @b: 2nd struct ieee80211_channel
+ * Return: true if center frequency of @a == @b
+ */
+static inline bool
+ieee80211_channel_equal(struct ieee80211_channel *a,
+			struct ieee80211_channel *b)
+{
+	return (a->center_freq == b->center_freq &&
+		a->freq_offset == b->freq_offset);
+}
+
+/**
+ * ieee80211_channel_to_khz - convert ieee80211_channel to frequency in KHz
+ * @chan: struct ieee80211_channel to convert
+ * Return: The corresponding frequency (in KHz)
+ */
+static inline u32
+ieee80211_channel_to_khz(const struct ieee80211_channel *chan)
+{
+	return MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset;
+}
+
+/**
+ * ieee80211_channel_to_freq_khz - convert channel number to frequency
+ * @chan: channel number
+ * @band: band, necessary due to channel number overlap
+ * Return: The corresponding frequency (in KHz), or 0 if the conversion failed.
+ */
+u32 ieee80211_channel_to_freq_khz(int chan, enum nl80211_band band);
+
 /**
  * ieee80211_channel_to_frequency - convert channel number to frequency
  * @chan: channel number
  * @band: band, necessary due to channel number overlap
  * Return: The corresponding frequency (in MHz), or 0 if the conversion failed.
  */
-int ieee80211_channel_to_frequency(int chan, enum nl80211_band band);
+static inline int
+ieee80211_channel_to_frequency(int chan, enum nl80211_band band)
+{
+	return KHZ_TO_MHZ(ieee80211_channel_to_freq_khz(chan, band));
+}
+
+/**
+ * ieee80211_freq_khz_to_channel - convert frequency to channel number
+ * @freq: center frequency in KHz
+ * Return: The corresponding channel, or 0 if the conversion failed.
+ */
+int ieee80211_freq_khz_to_channel(u32 freq);
 
 /**
  * ieee80211_frequency_to_channel - convert frequency to channel number
- * @freq: center frequency
+ * @freq: center frequency in MHz
  * Return: The corresponding channel, or 0 if the conversion failed.
  */
-int ieee80211_frequency_to_channel(int freq);
+static inline int
+ieee80211_frequency_to_channel(int freq)
+{
+	return ieee80211_freq_khz_to_channel(MHZ_TO_KHZ(freq));
+}
+
+/**
+ * ieee80211_get_channel_khz - get channel struct from wiphy for specified
+ * frequency
+ * @wiphy: the struct wiphy to get the channel for
+ * @freq: the center frequency (in KHz) of the channel
+ * Return: The channel struct from @wiphy at @freq.
+ */
+struct ieee80211_channel *
+ieee80211_get_channel_khz(struct wiphy *wiphy, u32 freq);
 
 /**
  * ieee80211_get_channel - get channel struct from wiphy for specified frequency
  *
  * @wiphy: the struct wiphy to get the channel for
- * @freq: the center frequency of the channel
- *
+ * @freq: the center frequency (in MHz) of the channel
  * Return: The channel struct from @wiphy at @freq.
  */
-struct ieee80211_channel *ieee80211_get_channel(struct wiphy *wiphy, int freq);
+static inline struct ieee80211_channel *
+ieee80211_get_channel(struct wiphy *wiphy, int freq)
+{
+	return ieee80211_get_channel_khz(wiphy, MHZ_TO_KHZ(freq));
+}
 
 /**
  * ieee80211_get_response_rate - get basic rate for a given rate
@@ -6135,12 +6224,16 @@ void cfg80211_tx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len);
 /**
  * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame
  * @dev: network device
- * @buf: deauthentication frame (header + body)
+ * @buf: received management frame (header + body)
  * @len: length of the frame data
  *
  * This function is called whenever a received deauthentication or dissassoc
  * frame has been dropped in station mode because of MFP being used but the
- * frame was not protected. This function may sleep.
+ * frame was not protected. This is also used to notify reception of a Beacon
+ * frame that was dropped because it did not include a valid MME MIC while
+ * beacon protection was enabled (BIGTK configured in station mode).
+ *
+ * This function may sleep.
  */
 void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev,
 				  const u8 *buf, size_t len);
@@ -7202,6 +7295,19 @@ bool ieee80211_operating_class_to_band(u8 operating_class,
 bool ieee80211_chandef_to_operating_class(struct cfg80211_chan_def *chandef,
 					  u8 *op_class);
 
+/**
+ * ieee80211_chandef_to_khz - convert chandef to frequency in KHz
+ *
+ * @chandef: the chandef to convert
+ *
+ * Returns the center frequency of chandef (1st segment) in KHz.
+ */
+static inline u32
+ieee80211_chandef_to_khz(const struct cfg80211_chan_def *chandef)
+{
+	return MHZ_TO_KHZ(chandef->center_freq1) + chandef->freq1_offset;
+}
+
 /*
  * cfg80211_tdls_oper_request - request userspace to perform TDLS operation
  * @dev: the device on which the operation is requested
diff --git a/include/net/espintcp.h b/include/net/espintcp.h
index dd7026a00066..0335bbd76552 100644
--- a/include/net/espintcp.h
+++ b/include/net/espintcp.h
@@ -25,6 +25,7 @@ struct espintcp_ctx {
 	struct espintcp_msg partial;
 	void (*saved_data_ready)(struct sock *sk);
 	void (*saved_write_space)(struct sock *sk);
+	void (*saved_destruct)(struct sock *sk);
 	struct work_struct work;
 	bool tx_running;
 };
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index a01981d7108f..514dd6e423b1 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -78,7 +78,7 @@ struct inet6_ifaddr {
 struct ip6_sf_socklist {
 	unsigned int		sl_max;
 	unsigned int		sl_count;
-	struct in6_addr		sl_addr[0];
+	struct in6_addr		sl_addr[];
 };
 
 #define IP6_SFLSIZE(count)	(sizeof(struct ip6_sf_socklist) + \
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 9947eb1e9eb6..e525f003e619 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -123,7 +123,7 @@ int ipv6_route_ioctl(struct net *net, unsigned int cmd, void __user *arg);
 int ip6_route_add(struct fib6_config *cfg, gfp_t gfp_flags,
 		  struct netlink_ext_ack *extack);
 int ip6_ins_rt(struct net *net, struct fib6_info *f6i);
-int ip6_del_rt(struct net *net, struct fib6_info *f6i);
+int ip6_del_rt(struct net *net, struct fib6_info *f6i, bool skip_notify);
 
 void rt6_flush_exceptions(struct fib6_info *f6i);
 void rt6_age_exceptions(struct fib6_info *f6i, struct fib6_gc_args *gc_args,
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 1bf8065fe871..955badd1e8ff 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -908,7 +908,6 @@ static inline int ip6_default_np_autolabel(struct net *net)
 	}
 }
 #else
-static inline void ip6_set_txhash(struct sock *sk) { }
 static inline __be32 ip6_make_flowlabel(struct net *net, struct sk_buff *skb,
 					__be32 flowlabel, bool autolabel,
 					struct flowi6 *fl6)
diff --git a/include/net/ipv6_stubs.h b/include/net/ipv6_stubs.h
index 3e7d2c0e79ca..424819829245 100644
--- a/include/net/ipv6_stubs.h
+++ b/include/net/ipv6_stubs.h
@@ -48,7 +48,7 @@ struct ipv6_stub {
 			    struct netlink_ext_ack *extack);
 	void (*fib6_nh_release)(struct fib6_nh *fib6_nh);
 	void (*fib6_update_sernum)(struct net *net, struct fib6_info *rt);
-	int (*ip6_del_rt)(struct net *net, struct fib6_info *rt);
+	int (*ip6_del_rt)(struct net *net, struct fib6_info *rt, bool skip_notify);
 	void (*fib6_rt_update)(struct net *net, struct fib6_info *rt,
 			       struct nl_info *info);
 
@@ -56,6 +56,11 @@ struct ipv6_stub {
 	void (*ndisc_send_na)(struct net_device *dev, const struct in6_addr *daddr,
 			      const struct in6_addr *solicited_addr,
 			      bool router, bool solicited, bool override, bool inc_opt);
+#if IS_ENABLED(CONFIG_XFRM)
+	int (*xfrm6_udp_encap_rcv)(struct sock *sk, struct sk_buff *skb);
+	int (*xfrm6_rcv_encap)(struct sk_buff *skb, int nexthdr, __be32 spi,
+			       int encap_type);
+#endif
 	struct neigh_table *nd_tbl;
 };
 extern const struct ipv6_stub *ipv6_stub __read_mostly;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 97fec4d310ac..7cb712427df1 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -230,7 +230,7 @@ struct ieee80211_chanctx_conf {
 
 	bool radar_enabled;
 
-	u8 drv_priv[0] __aligned(sizeof(void *));
+	u8 drv_priv[] __aligned(sizeof(void *));
 };
 
 /**
@@ -508,6 +508,7 @@ struct ieee80211_ftm_responder_params {
  *	mode only, set if the AP advertises TWT responder role)
  * @twt_responder: does this BSS support TWT requester (relevant for managed
  *	mode only, set if the AP advertises TWT responder role)
+ * @twt_protected: does this BSS support protected TWT frames
  * @assoc: association status
  * @ibss_joined: indicates whether this station is part of an IBSS
  *	or not
@@ -603,7 +604,7 @@ struct ieee80211_ftm_responder_params {
  *	nontransmitted BSSIDs
  * @profile_periodicity: the least number of beacon frames need to be received
  *	in order to discover all the nontransmitted BSSIDs in the set.
- * @he_operation: HE operation information of the AP we are connected to
+ * @he_oper: HE operation information of the AP we are connected to
  * @he_obss_pd: OBSS Packet Detection parameters.
  * @he_bss_color: BSS coloring settings, if BSS supports HE
  */
@@ -618,6 +619,7 @@ struct ieee80211_bss_conf {
 	bool he_support;
 	bool twt_requester;
 	bool twt_responder;
+	bool twt_protected;
 	/* association related data */
 	bool assoc, ibss_joined;
 	bool ibss_creator;
@@ -666,7 +668,10 @@ struct ieee80211_bss_conf {
 	u8 bssid_indicator;
 	bool ema_ap;
 	u8 profile_periodicity;
-	struct ieee80211_he_operation he_operation;
+	struct {
+		u32 params;
+		u16 nss_set;
+	} he_oper;
 	struct ieee80211_he_obss_pd he_obss_pd;
 	struct cfg80211_he_bss_color he_bss_color;
 };
@@ -818,6 +823,8 @@ enum mac80211_tx_info_flags {
  * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame
  * @IEEE80211_TX_CTRL_FAST_XMIT: This frame is going through the fast_xmit path
  * @IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP: This frame skips mesh path lookup
+ * @IEEE80211_TX_CTRL_HW_80211_ENCAP: This frame uses hardware encapsulation
+ *	(header conversion)
  *
  * These flags are used in tx_info->control.flags.
  */
@@ -1333,6 +1340,7 @@ enum mac80211_rx_encoding {
  * @freq: frequency the radio was tuned to when receiving this frame, in MHz
  *	This field must be set for management frames, but isn't strictly needed
  *	for data (other) frames - for those it only affects radiotap reporting.
+ * @freq_offset: @freq has a positive offset of 500Khz.
  * @signal: signal strength when receiving this frame, either in dBm, in dB or
  *	unspecified depending on the hardware capabilities flags
  *	@IEEE80211_HW_SIGNAL_*
@@ -1363,7 +1371,7 @@ struct ieee80211_rx_status {
 	u32 device_timestamp;
 	u32 ampdu_reference;
 	u32 flag;
-	u16 freq;
+	u16 freq: 13, freq_offset: 1;
 	u8 enc_flags;
 	u8 encoding:2, bw:3, he_ru:3;
 	u8 he_gi:2, he_dcm:1;
@@ -1379,6 +1387,13 @@ struct ieee80211_rx_status {
 	u8 zero_length_psdu_type;
 };
 
+static inline u32
+ieee80211_rx_status_to_khz(struct ieee80211_rx_status *rx_status)
+{
+	return MHZ_TO_KHZ(rx_status->freq) +
+	       (rx_status->freq_offset ? 500 : 0);
+}
+
 /**
  * struct ieee80211_vendor_radiotap - vendor radiotap data information
  * @present: presence bitmap for this vendor namespace
@@ -1620,6 +1635,8 @@ enum ieee80211_vif_flags {
  *	monitor interface (if that is requested.)
  * @probe_req_reg: probe requests should be reported to mac80211 for this
  *	interface.
+ * @rx_mcast_action_reg: multicast Action frames should be reported to mac80211
+ *	for this interface.
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void \*).
  * @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
@@ -1647,12 +1664,13 @@ struct ieee80211_vif {
 	struct dentry *debugfs_dir;
 #endif
 
-	unsigned int probe_req_reg;
+	bool probe_req_reg;
+	bool rx_mcast_action_reg;
 
 	bool txqs_stopped[IEEE80211_NUM_ACS];
 
 	/* must be last */
-	u8 drv_priv[0] __aligned(sizeof(void *));
+	u8 drv_priv[] __aligned(sizeof(void *));
 };
 
 static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
@@ -1780,7 +1798,7 @@ struct ieee80211_key_conf {
 	s8 keyidx;
 	u16 flags;
 	u8 keylen;
-	u8 key[0];
+	u8 key[];
 };
 
 #define IEEE80211_MAX_PN_LEN	16
@@ -2035,7 +2053,7 @@ struct ieee80211_sta {
 	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1];
 
 	/* must be last */
-	u8 drv_priv[0] __aligned(sizeof(void *));
+	u8 drv_priv[] __aligned(sizeof(void *));
 };
 
 /**
@@ -2081,7 +2099,7 @@ struct ieee80211_txq {
 	u8 ac;
 
 	/* must be last */
-	u8 drv_priv[0] __aligned(sizeof(void *));
+	u8 drv_priv[] __aligned(sizeof(void *));
 };
 
 /**
@@ -3091,6 +3109,8 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * @FIF_PSPOLL: pass PS Poll frames
  *
  * @FIF_PROBE_REQ: pass probe request frames
+ *
+ * @FIF_MCAST_ACTION: pass multicast Action frames
  */
 enum ieee80211_filter_flags {
 	FIF_ALLMULTI		= 1<<1,
@@ -3101,6 +3121,7 @@ enum ieee80211_filter_flags {
 	FIF_OTHER_BSS		= 1<<6,
 	FIF_PSPOLL		= 1<<7,
 	FIF_PROBE_REQ		= 1<<8,
+	FIF_MCAST_ACTION	= 1<<9,
 };
 
 /**
@@ -3117,7 +3138,10 @@ enum ieee80211_filter_flags {
  * @IEEE80211_AMPDU_RX_START: start RX aggregation
  * @IEEE80211_AMPDU_RX_STOP: stop RX aggregation
  * @IEEE80211_AMPDU_TX_START: start TX aggregation, the driver must either
- *	call ieee80211_start_tx_ba_cb_irqsafe() or return the special
+ *	call ieee80211_start_tx_ba_cb_irqsafe() or
+ *	call ieee80211_start_tx_ba_cb_irqsafe() with status
+ *	%IEEE80211_AMPDU_TX_START_DELAY_ADDBA to delay addba after
+ *	ieee80211_start_tx_ba_cb_irqsafe is called, or just return the special
  *	status %IEEE80211_AMPDU_TX_START_IMMEDIATE.
  * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational
  * @IEEE80211_AMPDU_TX_STOP_CONT: stop TX aggregation but continue transmitting
@@ -3143,6 +3167,7 @@ enum ieee80211_ampdu_mlme_action {
 };
 
 #define IEEE80211_AMPDU_TX_START_IMMEDIATE 1
+#define IEEE80211_AMPDU_TX_START_DELAY_ADDBA 2
 
 /**
  * struct ieee80211_ampdu_params - AMPDU action parameters
diff --git a/include/net/mptcp.h b/include/net/mptcp.h
index 0e7c5471010b..5288fba56e55 100644
--- a/include/net/mptcp.h
+++ b/include/net/mptcp.h
@@ -68,6 +68,8 @@ static inline bool rsk_is_mptcp(const struct request_sock *req)
 	return tcp_rsk(req)->is_mptcp;
 }
 
+void mptcp_space(const struct sock *ssk, int *space, int *full_space);
+
 void mptcp_parse_option(const struct sk_buff *skb, const unsigned char *ptr,
 			int opsize, struct tcp_options_received *opt_rx);
 bool mptcp_syn_options(struct sock *sk, const struct sk_buff *skb,
@@ -197,6 +199,7 @@ static inline bool mptcp_sk_is_subflow(const struct sock *sk)
 	return false;
 }
 
+static inline void mptcp_space(const struct sock *ssk, int *s, int *fs) { }
 static inline void mptcp_seq_show(struct seq_file *seq) { }
 #endif /* CONFIG_MPTCP */
 
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index 4ff7c81e6717..d4e29c952c40 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -243,6 +243,10 @@ struct nft_set_elem {
 		u32		buf[NFT_DATA_VALUE_MAXLEN / sizeof(u32)];
 		struct nft_data	val;
 	} key_end;
+	union {
+		u32		buf[NFT_DATA_VALUE_MAXLEN / sizeof(u32)];
+		struct nft_data val;
+	} data;
 	void			*priv;
 };
 
diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
index 154b8f01499b..5acdb4d414c4 100644
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -111,6 +111,8 @@ struct netns_ipv4 {
 	int sysctl_tcp_early_demux;
 	int sysctl_udp_early_demux;
 
+	int sysctl_nexthop_compat_mode;
+
 	int sysctl_fwmark_reflect;
 	int sysctl_tcp_fwmark_accept;
 #ifdef CONFIG_NET_L3_MASTER_DEV
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index 3469750df0f4..09a3099886e5 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -231,13 +231,6 @@ struct ieee80211_regdomain {
 	struct ieee80211_reg_rule reg_rules[];
 };
 
-#define MHZ_TO_KHZ(freq) ((freq) * 1000)
-#define KHZ_TO_MHZ(freq) ((freq) / 1000)
-#define DBI_TO_MBI(gain) ((gain) * 100)
-#define MBI_TO_DBI(gain) ((gain) / 100)
-#define DBM_TO_MBM(gain) ((gain) * 100)
-#define MBM_TO_DBM(gain) ((gain) / 100)
-
 #define REG_RULE_EXT(start, end, bw, gain, eirp, dfs_cac, reg_flags)	\
 {									\
 	.freq_range.start_freq_khz = MHZ_TO_KHZ(start),			\
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 25d2ec4c8f00..1862bf5a105b 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -710,11 +710,6 @@ static inline void qdisc_reset_all_tx_gt(struct net_device *dev, unsigned int i)
 	}
 }
 
-static inline void qdisc_reset_all_tx(struct net_device *dev)
-{
-	qdisc_reset_all_tx_gt(dev, 0);
-}
-
 /* Are all TX queues of the device empty?  */
 static inline bool qdisc_all_tx_empty(const struct net_device *dev)
 {
diff --git a/include/net/switchdev.h b/include/net/switchdev.h
index aee86a189432..ae7aeb0d1f9c 100644
--- a/include/net/switchdev.h
+++ b/include/net/switchdev.h
@@ -40,6 +40,10 @@ enum switchdev_attr_id {
 	SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING,
 	SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED,
 	SWITCHDEV_ATTR_ID_BRIDGE_MROUTER,
+#if IS_ENABLED(CONFIG_BRIDGE_MRP)
+	SWITCHDEV_ATTR_ID_MRP_PORT_STATE,
+	SWITCHDEV_ATTR_ID_MRP_PORT_ROLE,
+#endif
 };
 
 struct switchdev_attr {
@@ -55,6 +59,11 @@ struct switchdev_attr {
 		clock_t ageing_time;			/* BRIDGE_AGEING_TIME */
 		bool vlan_filtering;			/* BRIDGE_VLAN_FILTERING */
 		bool mc_disabled;			/* MC_DISABLED */
+#if IS_ENABLED(CONFIG_BRIDGE_MRP)
+		u8 mrp_port_state;			/* MRP_PORT_STATE */
+		u8 mrp_port_role;			/* MRP_PORT_ROLE */
+		u8 mrp_ring_state;			/* MRP_RING_STATE */
+#endif
 	} u;
 };
 
@@ -63,6 +72,12 @@ enum switchdev_obj_id {
 	SWITCHDEV_OBJ_ID_PORT_VLAN,
 	SWITCHDEV_OBJ_ID_PORT_MDB,
 	SWITCHDEV_OBJ_ID_HOST_MDB,
+#if IS_ENABLED(CONFIG_BRIDGE_MRP)
+	SWITCHDEV_OBJ_ID_MRP,
+	SWITCHDEV_OBJ_ID_RING_TEST_MRP,
+	SWITCHDEV_OBJ_ID_RING_ROLE_MRP,
+	SWITCHDEV_OBJ_ID_RING_STATE_MRP,
+#endif
 };
 
 struct switchdev_obj {
@@ -94,6 +109,53 @@ struct switchdev_obj_port_mdb {
 #define SWITCHDEV_OBJ_PORT_MDB(OBJ) \
 	container_of((OBJ), struct switchdev_obj_port_mdb, obj)
 
+
+#if IS_ENABLED(CONFIG_BRIDGE_MRP)
+/* SWITCHDEV_OBJ_ID_MRP */
+struct switchdev_obj_mrp {
+	struct switchdev_obj obj;
+	struct net_device *p_port;
+	struct net_device *s_port;
+	u32 ring_id;
+};
+
+#define SWITCHDEV_OBJ_MRP(OBJ) \
+	container_of((OBJ), struct switchdev_obj_mrp, obj)
+
+/* SWITCHDEV_OBJ_ID_RING_TEST_MRP */
+struct switchdev_obj_ring_test_mrp {
+	struct switchdev_obj obj;
+	/* The value is in us and a value of 0 represents to stop */
+	u32 interval;
+	u8 max_miss;
+	u32 ring_id;
+	u32 period;
+};
+
+#define SWITCHDEV_OBJ_RING_TEST_MRP(OBJ) \
+	container_of((OBJ), struct switchdev_obj_ring_test_mrp, obj)
+
+/* SWICHDEV_OBJ_ID_RING_ROLE_MRP */
+struct switchdev_obj_ring_role_mrp {
+	struct switchdev_obj obj;
+	u8 ring_role;
+	u32 ring_id;
+};
+
+#define SWITCHDEV_OBJ_RING_ROLE_MRP(OBJ) \
+	container_of((OBJ), struct switchdev_obj_ring_role_mrp, obj)
+
+struct switchdev_obj_ring_state_mrp {
+	struct switchdev_obj obj;
+	u8 ring_state;
+	u32 ring_id;
+};
+
+#define SWITCHDEV_OBJ_RING_STATE_MRP(OBJ) \
+	container_of((OBJ), struct switchdev_obj_ring_state_mrp, obj)
+
+#endif
+
 typedef int switchdev_obj_dump_cb_t(struct switchdev_obj *obj);
 
 enum switchdev_notifier_type {
diff --git a/include/net/xdp.h b/include/net/xdp.h
index 40c6d3398458..3cc6d5d84aa4 100644
--- a/include/net/xdp.h
+++ b/include/net/xdp.h
@@ -181,4 +181,6 @@ bool xdp_attachment_flags_ok(struct xdp_attachment_info *info,
 void xdp_attachment_setup(struct xdp_attachment_info *info,
 			  struct netdev_bpf *bpf);
 
+#define DEV_MAP_BULK_SIZE 16
+
 #endif /* __LINUX_NET_XDP_H__ */
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 8f71c111e65a..2577666c34c8 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1406,6 +1406,8 @@ struct xfrm4_protocol {
 
 struct xfrm6_protocol {
 	int (*handler)(struct sk_buff *skb);
+	int (*input_handler)(struct sk_buff *skb, int nexthdr, __be32 spi,
+			     int encap_type);
 	int (*cb_handler)(struct sk_buff *skb, int err);
 	int (*err_handler)(struct sk_buff *skb, struct inet6_skb_parm *opt,
 			   u8 type, u8 code, int offset, __be32 info);
@@ -1590,6 +1592,8 @@ int xfrm6_extract_header(struct sk_buff *skb);
 int xfrm6_extract_input(struct xfrm_state *x, struct sk_buff *skb);
 int xfrm6_rcv_spi(struct sk_buff *skb, int nexthdr, __be32 spi,
 		  struct ip6_tnl *t);
+int xfrm6_rcv_encap(struct sk_buff *skb, int nexthdr, __be32 spi,
+		    int encap_type);
 int xfrm6_transport_finish(struct sk_buff *skb, int async);
 int xfrm6_rcv_tnl(struct sk_buff *skb, struct ip6_tnl *t);
 int xfrm6_rcv(struct sk_buff *skb);
@@ -1610,6 +1614,7 @@ int xfrm6_find_1stfragopt(struct xfrm_state *x, struct sk_buff *skb,
 
 #ifdef CONFIG_XFRM
 int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb);
+int xfrm6_udp_encap_rcv(struct sock *sk, struct sk_buff *skb);
 int xfrm_user_policy(struct sock *sk, int optname,
 		     u8 __user *optval, int optlen);
 #else
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
index 59a011101e0e..a42a07bdce3b 100644
--- a/include/pcmcia/cistpl.h
+++ b/include/pcmcia/cistpl.h
@@ -160,8 +160,8 @@ typedef struct cistpl_funcid_t {
 } cistpl_funcid_t;
 
 typedef struct cistpl_funce_t {
-    u_char	type;
-    u_char	data[0];
+	u_char	type;
+	u_char	data[];
 } cistpl_funce_t;
 
 /*======================================================================
@@ -245,27 +245,27 @@ typedef struct cistpl_modem_cap_t {
 #define CISTPL_SERIAL_CMD_DMCL		0x40
 
 typedef struct cistpl_data_serv_t {
-    u_char	max_data_0;
-    u_char	max_data_1;
-    u_char	modulation_0;
-    u_char	modulation_1;
-    u_char	error_control;
-    u_char	compression;
-    u_char	cmd_protocol;
-    u_char	escape;
-    u_char	encrypt;
-    u_char	misc_features;
-    u_char	ccitt_code[0];
+	u_char	max_data_0;
+	u_char	max_data_1;
+	u_char	modulation_0;
+	u_char	modulation_1;
+	u_char	error_control;
+	u_char	compression;
+	u_char	cmd_protocol;
+	u_char	escape;
+	u_char	encrypt;
+	u_char	misc_features;
+	u_char	ccitt_code[];
 } cistpl_data_serv_t;
 
 typedef struct cistpl_fax_serv_t {
-    u_char	max_data_0;
-    u_char	max_data_1;
-    u_char	modulation;
-    u_char	encrypt;
-    u_char	features_0;
-    u_char	features_1;
-    u_char	ccitt_code[0];
+	u_char	max_data_0;
+	u_char	max_data_1;
+	u_char	modulation;
+	u_char	encrypt;
+	u_char	features_0;
+	u_char	features_1;
+	u_char	ccitt_code[];
 } cistpl_fax_serv_t;
 
 typedef struct cistpl_voice_serv_t {
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index bbc5cfb57cd2..e072ef6069a4 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -100,7 +100,8 @@ void ibdev_notice(const struct ib_device *ibdev, const char *format, ...);
 __printf(2, 3) __cold
 void ibdev_info(const struct ib_device *ibdev, const char *format, ...);
 
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 #define ibdev_dbg(__dev, format, args...)                       \
 	dynamic_ibdev_dbg(__dev, format, ##args)
 #else
@@ -133,7 +134,8 @@ do {                                                                    \
 #define ibdev_info_ratelimited(ibdev, fmt, ...) \
 	ibdev_level_ratelimited(ibdev_info, ibdev, fmt, ##__VA_ARGS__)
 
-#if defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG) || \
+	(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
 /* descriptor check is first to prevent flooding with "callbacks suppressed" */
 #define ibdev_dbg_ratelimited(ibdev, fmt, ...)                          \
 do {                                                                    \
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index 71f48cfdc24c..ea8e794785ed 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -389,14 +389,6 @@ __be64 rdma_get_service_id(struct rdma_cm_id *id, struct sockaddr *addr);
  */
 const char *__attribute_const__ rdma_reject_msg(struct rdma_cm_id *id,
 						int reason);
-/**
- * rdma_is_consumer_reject - return true if the consumer rejected the connect
- *                           request.
- * @id: Communication identifier that received the REJECT event.
- * @reason: Value returned in the REJECT event status field.
- */
-bool rdma_is_consumer_reject(struct rdma_cm_id *id, int reason);
-
 /**
  * rdma_consumer_reject_data - return the consumer reject private data and
  *			       length, if any.
diff --git a/include/rdma/rdmavt_qp.h b/include/rdma/rdmavt_qp.h
index 5fc10108703a..982bf2340840 100644
--- a/include/rdma/rdmavt_qp.h
+++ b/include/rdma/rdmavt_qp.h
@@ -440,7 +440,7 @@ struct rvt_qp {
 	/*
 	 * This sge list MUST be last. Do not add anything below here.
 	 */
-	struct rvt_sge r_sg_list[0] /* verified SGEs */
+	struct rvt_sge r_sg_list[] /* verified SGEs */
 		____cacheline_aligned_in_smp;
 };
 
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index a5d8ae49198c..4726c1bbec65 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -324,7 +324,7 @@ struct ssp_response_iu {
 	__be32 response_data_len;
 
 	u8     resp_data[0];
-	u8     sense_data[0];
+	u8     sense_data[];
 } __attribute__ ((packed));
 
 struct ssp_command_iu {
@@ -346,7 +346,7 @@ struct ssp_command_iu {
 	u8    add_cdb_len:6;
 
 	u8    cdb[16];
-	u8    add_cdb[0];
+	u8    add_cdb[];
 } __attribute__ ((packed));
 
 struct xfer_rdy_iu {
@@ -555,7 +555,7 @@ struct ssp_response_iu {
 	__be32 response_data_len;
 
 	u8     resp_data[0];
-	u8     sense_data[0];
+	u8     sense_data[];
 } __attribute__ ((packed));
 
 struct ssp_command_iu {
@@ -577,7 +577,7 @@ struct ssp_command_iu {
 	u8    _r_c:2;
 
 	u8    cdb[16];
-	u8    add_cdb[0];
+	u8    add_cdb[];
 } __attribute__ ((packed));
 
 struct xfer_rdy_iu {
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 80ac89e47b47..f93c0b800790 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -142,6 +142,7 @@ struct scsi_cmnd {
 	unsigned long state;	/* Command completion state */
 
 	unsigned char tag;	/* SCSI-II queued command tag */
+	unsigned int extra_len;	/* length of alignment and padding */
 };
 
 /*
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index c3cba2aaf934..bc5909033d13 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -229,6 +229,9 @@ struct scsi_device {
 	struct scsi_device_handler *handler;
 	void			*handler_data;
 
+	size_t			dma_drain_len;
+	void			*dma_drain_buf;
+
 	unsigned char		access_state;
 	struct mutex		state_mutex;
 	enum scsi_device_state sdev_state;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 822e8cda8d9b..46ef8cccc982 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -270,6 +270,13 @@ struct scsi_host_template {
 	 */
 	int (* map_queues)(struct Scsi_Host *shost);
 
+	/*
+	 * Check if scatterlists need to be padded for DMA draining.
+	 *
+	 * Status: OPTIONAL
+	 */
+	bool (* dma_need_drain)(struct request *rq);
+
 	/*
 	 * This function determines the BIOS parameters for a given
 	 * harddisk.  These tend to be numbers that are made up by
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 6d6a3947c8b7..a025fb798164 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -92,6 +92,8 @@
 #define OCELOT_SPEED_100		2
 #define OCELOT_SPEED_10			3
 
+#define OCELOT_PTP_PINS_NUM		4
+
 #define TARGET_OFFSET			24
 #define REG_MASK			GENMASK(TARGET_OFFSET - 1, 0)
 #define REG(reg, offset)		[reg & REG_MASK] = offset
@@ -385,6 +387,8 @@ enum ocelot_reg {
 	PTP_PIN_TOD_SEC_MSB,
 	PTP_PIN_TOD_SEC_LSB,
 	PTP_PIN_TOD_NSEC,
+	PTP_PIN_WF_HIGH_PERIOD,
+	PTP_PIN_WF_LOW_PERIOD,
 	PTP_CFG_MISC,
 	PTP_CLK_CFG_ADJ_CFG,
 	PTP_CLK_CFG_ADJ_FREQ,
@@ -440,10 +444,11 @@ enum ocelot_regfield {
 	REGFIELD_MAX
 };
 
-enum ocelot_clk_pins {
-	ALT_PPS_PIN	= 1,
-	EXT_CLK_PIN,
-	ALT_LDST_PIN,
+enum ocelot_ptp_pins {
+	PTP_PIN_0,
+	PTP_PIN_1,
+	PTP_PIN_2,
+	PTP_PIN_3,
 	TOD_ACC_PIN
 };
 
@@ -549,6 +554,7 @@ struct ocelot {
 	struct mutex			ptp_lock;
 	/* Protects the PTP clock */
 	spinlock_t			ptp_clock_lock;
+	struct ptp_pin_desc		ptp_pins[OCELOT_PTP_PINS_NUM];
 };
 
 struct ocelot_policer {
@@ -620,7 +626,6 @@ int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
 int ocelot_vlan_del(struct ocelot *ocelot, int port, u16 vid);
 int ocelot_hwstamp_get(struct ocelot *ocelot, int port, struct ifreq *ifr);
 int ocelot_hwstamp_set(struct ocelot *ocelot, int port, struct ifreq *ifr);
-int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts);
 int ocelot_port_add_txtstamp_skb(struct ocelot_port *ocelot_port,
 				 struct sk_buff *skb);
 void ocelot_get_txtstamp(struct ocelot *ocelot);
diff --git a/include/soc/mscc/ocelot_ptp.h b/include/soc/mscc/ocelot_ptp.h
new file mode 100644
index 000000000000..4a6b2f71b6b2
--- /dev/null
+++ b/include/soc/mscc/ocelot_ptp.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Microsemi Ocelot Switch driver
+ *
+ * License: Dual MIT/GPL
+ * Copyright (c) 2017 Microsemi Corporation
+ * Copyright 2020 NXP
+ */
+
+#ifndef _MSCC_OCELOT_PTP_H_
+#define _MSCC_OCELOT_PTP_H_
+
+#include <linux/ptp_clock_kernel.h>
+#include <soc/mscc/ocelot.h>
+
+#define PTP_PIN_CFG_RSZ			0x20
+#define PTP_PIN_TOD_SEC_MSB_RSZ		PTP_PIN_CFG_RSZ
+#define PTP_PIN_TOD_SEC_LSB_RSZ		PTP_PIN_CFG_RSZ
+#define PTP_PIN_TOD_NSEC_RSZ		PTP_PIN_CFG_RSZ
+#define PTP_PIN_WF_HIGH_PERIOD_RSZ	PTP_PIN_CFG_RSZ
+#define PTP_PIN_WF_LOW_PERIOD_RSZ	PTP_PIN_CFG_RSZ
+
+#define PTP_PIN_CFG_DOM			BIT(0)
+#define PTP_PIN_CFG_SYNC		BIT(2)
+#define PTP_PIN_CFG_ACTION(x)		((x) << 3)
+#define PTP_PIN_CFG_ACTION_MASK		PTP_PIN_CFG_ACTION(0x7)
+
+enum {
+	PTP_PIN_ACTION_IDLE = 0,
+	PTP_PIN_ACTION_LOAD,
+	PTP_PIN_ACTION_SAVE,
+	PTP_PIN_ACTION_CLOCK,
+	PTP_PIN_ACTION_DELTA,
+	PTP_PIN_ACTION_NOSYNC,
+	PTP_PIN_ACTION_SYNC,
+};
+
+#define PTP_CFG_MISC_PTP_EN		BIT(2)
+
+#define PSEC_PER_SEC			1000000000000LL
+
+#define PTP_CFG_CLK_ADJ_CFG_ENA		BIT(0)
+#define PTP_CFG_CLK_ADJ_CFG_DIR		BIT(1)
+
+#define PTP_CFG_CLK_ADJ_FREQ_NS		BIT(30)
+
+int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts);
+int ocelot_ptp_settime64(struct ptp_clock_info *ptp,
+			 const struct timespec64 *ts);
+int ocelot_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta);
+int ocelot_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm);
+int ocelot_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
+		      enum ptp_pin_function func, unsigned int chan);
+int ocelot_ptp_enable(struct ptp_clock_info *ptp,
+		      struct ptp_clock_request *rq, int on);
+int ocelot_init_timestamp(struct ocelot *ocelot, struct ptp_clock_info *info);
+int ocelot_deinit_timestamp(struct ocelot *ocelot);
+#endif
diff --git a/include/soc/qcom/cmd-db.h b/include/soc/qcom/cmd-db.h
index af9722223925..c8bb56e6852a 100644
--- a/include/soc/qcom/cmd-db.h
+++ b/include/soc/qcom/cmd-db.h
@@ -4,6 +4,7 @@
 #ifndef __QCOM_COMMAND_DB_H__
 #define __QCOM_COMMAND_DB_H__
 
+#include <linux/err.h>
 
 enum cmd_db_hw_type {
 	CMD_DB_HW_INVALID = 0,
diff --git a/include/sound/control.h b/include/sound/control.h
index 11feeee31e35..aeaed2a05bae 100644
--- a/include/sound/control.h
+++ b/include/sound/control.h
@@ -75,7 +75,7 @@ struct snd_kcontrol {
 	unsigned long private_value;
 	void *private_data;
 	void (*private_free)(struct snd_kcontrol *kcontrol);
-	struct snd_kcontrol_volatile vd[0];	/* volatile data */
+	struct snd_kcontrol_volatile vd[];	/* volatile data */
 };
 
 #define snd_kcontrol(n) list_entry(n, struct snd_kcontrol, list)
diff --git a/include/sound/intel-nhlt.h b/include/sound/intel-nhlt.h
index f657fd8fc0ad..743c2f442280 100644
--- a/include/sound/intel-nhlt.h
+++ b/include/sound/intel-nhlt.h
@@ -50,7 +50,7 @@ enum nhlt_device_type {
 
 struct nhlt_specific_cfg {
 	u32 size;
-	u8 caps[0];
+	u8 caps[];
 } __packed;
 
 struct nhlt_fmt_cfg {
@@ -60,7 +60,7 @@ struct nhlt_fmt_cfg {
 
 struct nhlt_fmt {
 	u8 fmt_count;
-	struct nhlt_fmt_cfg fmt_config[0];
+	struct nhlt_fmt_cfg fmt_config[];
 } __packed;
 
 struct nhlt_endpoint {
@@ -80,7 +80,7 @@ struct nhlt_endpoint {
 struct nhlt_acpi_table {
 	struct acpi_table_header header;
 	u8 endpoint_count;
-	struct nhlt_endpoint desc[0];
+	struct nhlt_endpoint desc[];
 } __packed;
 
 struct nhlt_resource_desc  {
diff --git a/include/sound/soc-component.h b/include/sound/soc-component.h
index 154d02fbbfed..864983b09846 100644
--- a/include/sound/soc-component.h
+++ b/include/sound/soc-component.h
@@ -25,6 +25,44 @@
 	     order++)
 
 /* component interface */
+struct snd_compress_ops {
+	int (*open)(struct snd_soc_component *component,
+		    struct snd_compr_stream *stream);
+	int (*free)(struct snd_soc_component *component,
+		    struct snd_compr_stream *stream);
+	int (*set_params)(struct snd_soc_component *component,
+			  struct snd_compr_stream *stream,
+			  struct snd_compr_params *params);
+	int (*get_params)(struct snd_soc_component *component,
+			  struct snd_compr_stream *stream,
+			  struct snd_codec *params);
+	int (*set_metadata)(struct snd_soc_component *component,
+			    struct snd_compr_stream *stream,
+			    struct snd_compr_metadata *metadata);
+	int (*get_metadata)(struct snd_soc_component *component,
+			    struct snd_compr_stream *stream,
+			    struct snd_compr_metadata *metadata);
+	int (*trigger)(struct snd_soc_component *component,
+		       struct snd_compr_stream *stream, int cmd);
+	int (*pointer)(struct snd_soc_component *component,
+		       struct snd_compr_stream *stream,
+		       struct snd_compr_tstamp *tstamp);
+	int (*copy)(struct snd_soc_component *component,
+		    struct snd_compr_stream *stream, char __user *buf,
+		    size_t count);
+	int (*mmap)(struct snd_soc_component *component,
+		    struct snd_compr_stream *stream,
+		    struct vm_area_struct *vma);
+	int (*ack)(struct snd_soc_component *component,
+		   struct snd_compr_stream *stream, size_t bytes);
+	int (*get_caps)(struct snd_soc_component *component,
+			struct snd_compr_stream *stream,
+			struct snd_compr_caps *caps);
+	int (*get_codec_caps)(struct snd_soc_component *component,
+			      struct snd_compr_stream *stream,
+			      struct snd_compr_codec_caps *codec);
+};
+
 struct snd_soc_component_driver {
 	const char *name;
 
@@ -108,7 +146,7 @@ struct snd_soc_component_driver {
 		    struct snd_pcm_substream *substream,
 		    struct vm_area_struct *vma);
 
-	const struct snd_compr_ops *compr_ops;
+	const struct snd_compress_ops *compress_ops;
 
 	/* probe ordering - for components with runtime dependencies */
 	int probe_order;
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index b33abe93b905..2a0a5af1c1ae 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -154,22 +154,47 @@ int snd_soc_dai_startup(struct snd_soc_dai *dai,
 			struct snd_pcm_substream *substream);
 void snd_soc_dai_shutdown(struct snd_soc_dai *dai,
 			  struct snd_pcm_substream *substream);
-int snd_soc_dai_prepare(struct snd_soc_dai *dai,
-			struct snd_pcm_substream *substream);
-int snd_soc_dai_trigger(struct snd_soc_dai *dai,
-			struct snd_pcm_substream *substream, int cmd);
-int snd_soc_dai_bespoke_trigger(struct snd_soc_dai *dai,
-			struct snd_pcm_substream *substream, int cmd);
 snd_pcm_sframes_t snd_soc_dai_delay(struct snd_soc_dai *dai,
 				    struct snd_pcm_substream *substream);
 void snd_soc_dai_suspend(struct snd_soc_dai *dai);
 void snd_soc_dai_resume(struct snd_soc_dai *dai);
-int snd_soc_dai_probe(struct snd_soc_dai *dai);
-int snd_soc_dai_remove(struct snd_soc_dai *dai);
 int snd_soc_dai_compress_new(struct snd_soc_dai *dai,
 			     struct snd_soc_pcm_runtime *rtd, int num);
 bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int stream);
 
+int snd_soc_pcm_dai_probe(struct snd_soc_pcm_runtime *rtd, int order);
+int snd_soc_pcm_dai_remove(struct snd_soc_pcm_runtime *rtd, int order);
+int snd_soc_pcm_dai_new(struct snd_soc_pcm_runtime *rtd);
+int snd_soc_pcm_dai_prepare(struct snd_pcm_substream *substream);
+int snd_soc_pcm_dai_trigger(struct snd_pcm_substream *substream, int cmd);
+int snd_soc_pcm_dai_bespoke_trigger(struct snd_pcm_substream *substream,
+				    int cmd);
+
+int snd_soc_dai_compr_startup(struct snd_soc_dai *dai,
+			      struct snd_compr_stream *cstream);
+void snd_soc_dai_compr_shutdown(struct snd_soc_dai *dai,
+				struct snd_compr_stream *cstream);
+int snd_soc_dai_compr_trigger(struct snd_soc_dai *dai,
+			      struct snd_compr_stream *cstream, int cmd);
+int snd_soc_dai_compr_set_params(struct snd_soc_dai *dai,
+				 struct snd_compr_stream *cstream,
+				 struct snd_compr_params *params);
+int snd_soc_dai_compr_get_params(struct snd_soc_dai *dai,
+				 struct snd_compr_stream *cstream,
+				 struct snd_codec *params);
+int snd_soc_dai_compr_ack(struct snd_soc_dai *dai,
+			  struct snd_compr_stream *cstream,
+			  size_t bytes);
+int snd_soc_dai_compr_pointer(struct snd_soc_dai *dai,
+			      struct snd_compr_stream *cstream,
+			      struct snd_compr_tstamp *tstamp);
+int snd_soc_dai_compr_set_metadata(struct snd_soc_dai *dai,
+				   struct snd_compr_stream *cstream,
+				   struct snd_compr_metadata *metadata);
+int snd_soc_dai_compr_get_metadata(struct snd_soc_dai *dai,
+				   struct snd_compr_stream *cstream,
+				   struct snd_compr_metadata *metadata);
+
 struct snd_soc_dai_ops {
 	/*
 	 * DAI clocking configuration, all optional.
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 08495f8d86dc..cc3dcb815282 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -689,7 +689,7 @@ struct snd_soc_dapm_context {
 /* A list of widgets associated with an object, typically a snd_kcontrol */
 struct snd_soc_dapm_widget_list {
 	int num_widgets;
-	struct snd_soc_dapm_widget *widgets[0];
+	struct snd_soc_dapm_widget *widgets[];
 };
 
 #define for_each_dapm_widgets(list, i, widget)				\
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 946f88a6c63d..69a82487fa9b 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -1146,14 +1146,16 @@ struct snd_soc_pcm_runtime {
 	/* runtime devices */
 	struct snd_pcm *pcm;
 	struct snd_compr *compr;
-	struct snd_soc_dai *codec_dai;
-	struct snd_soc_dai *cpu_dai;
-	struct snd_soc_dai **dais;
 
-	struct snd_soc_dai **codec_dais;
+	/*
+	 * dais = cpu_dai + codec_dai
+	 * see
+	 *	soc_new_pcm_runtime()
+	 *	asoc_rtd_to_cpu()
+	 *	asoc_rtd_to_codec()
+	 */
+	struct snd_soc_dai **dais;
 	unsigned int num_codecs;
-
-	struct snd_soc_dai **cpu_dais;
 	unsigned int num_cpus;
 
 	struct delayed_work delayed_work;
@@ -1170,28 +1172,28 @@ struct snd_soc_pcm_runtime {
 	unsigned int fe_compr:1; /* for Dynamic PCM */
 
 	int num_components;
-	struct snd_soc_component *components[0]; /* CPU/Codec/Platform */
+	struct snd_soc_component *components[]; /* CPU/Codec/Platform */
 };
 /* see soc_new_pcm_runtime()  */
 #define asoc_rtd_to_cpu(rtd, n)   (rtd)->dais[n]
 #define asoc_rtd_to_codec(rtd, n) (rtd)->dais[n + (rtd)->num_cpus]
 
 #define for_each_rtd_components(rtd, i, component)			\
-	for ((i) = 0;							\
+	for ((i) = 0, component = NULL;					\
 	     ((i) < rtd->num_components) && ((component) = rtd->components[i]);\
 	     (i)++)
 #define for_each_rtd_cpu_dais(rtd, i, dai)				\
 	for ((i) = 0;							\
-	     ((i) < rtd->num_cpus) && ((dai) = rtd->cpu_dais[i]);	\
+	     ((i) < rtd->num_cpus) && ((dai) = asoc_rtd_to_cpu(rtd, i)); \
 	     (i)++)
 #define for_each_rtd_cpu_dais_rollback(rtd, i, dai)		\
-	for (; (--(i) >= 0) && ((dai) = rtd->cpu_dais[i]);)
+	for (; (--(i) >= 0) && ((dai) = asoc_rtd_to_cpu(rtd, i));)
 #define for_each_rtd_codec_dais(rtd, i, dai)				\
 	for ((i) = 0;							\
-	     ((i) < rtd->num_codecs) && ((dai) = rtd->codec_dais[i]);	\
+	     ((i) < rtd->num_codecs) && ((dai) = asoc_rtd_to_codec(rtd, i)); \
 	     (i)++)
 #define for_each_rtd_codec_dais_rollback(rtd, i, dai)		\
-	for (; (--(i) >= 0) && ((dai) = rtd->codec_dais[i]);)
+	for (; (--(i) >= 0) && ((dai) = asoc_rtd_to_codec(rtd, i));)
 #define for_each_rtd_dais(rtd, i, dai)					\
 	for ((i) = 0;							\
 	     ((i) < (rtd)->num_cpus + (rtd)->num_codecs) &&		\
@@ -1268,13 +1270,13 @@ static inline void *snd_soc_card_get_drvdata(struct snd_soc_card *card)
 static inline bool snd_soc_volsw_is_stereo(struct soc_mixer_control *mc)
 {
 	if (mc->reg == mc->rreg && mc->shift == mc->rshift)
-		return 0;
+		return false;
 	/*
 	 * mc->reg == mc->rreg && mc->shift != mc->rshift, or
 	 * mc->reg != mc->rreg means that the control is
 	 * stereo (bits in one register or in two registers)
 	 */
-	return 1;
+	return true;
 }
 
 static inline unsigned int snd_soc_enum_val_to_item(struct soc_enum *e,
@@ -1384,8 +1386,8 @@ struct snd_soc_dai *snd_soc_card_get_codec_dai(struct snd_soc_card *card,
 	struct snd_soc_pcm_runtime *rtd;
 
 	list_for_each_entry(rtd, &card->rtd_list, list) {
-		if (!strcmp(rtd->codec_dai->name, dai_name))
-			return rtd->codec_dai;
+		if (!strcmp(asoc_rtd_to_codec(rtd, 0)->name, dai_name))
+			return asoc_rtd_to_codec(rtd, 0);
 	}
 
 	return NULL;
diff --git a/include/sound/sof.h b/include/sound/sof.h
index a0cbca021230..969f554b0b7d 100644
--- a/include/sound/sof.h
+++ b/include/sound/sof.h
@@ -27,6 +27,9 @@ struct snd_sof_pdata {
 
 	struct device *dev;
 
+	/* indicate how many first bytes shouldn't be loaded into DSP memory. */
+	size_t fw_offset;
+
 	/*
 	 * notification callback used if the hardware initialization
 	 * can take time or is handled in a workqueue. This callback
diff --git a/include/sound/sof/dai-intel.h b/include/sound/sof/dai-intel.h
index 04e48227f542..896db2243d87 100644
--- a/include/sound/sof/dai-intel.h
+++ b/include/sound/sof/dai-intel.h
@@ -49,6 +49,9 @@
 /* bclk idle */
 #define SOF_DAI_INTEL_SSP_CLKCTRL_BCLK_IDLE_HIGH	BIT(5)
 
+/* DMIC max. four controllers for eight microphone channels */
+#define SOF_DAI_INTEL_DMIC_NUM_CTRL			4
+
 /* SSP Configuration Request - SOF_IPC_DAI_SSP_CONFIG */
 struct sof_ipc_dai_ssp_params {
 	struct sof_ipc_hdr hdr;
@@ -85,15 +88,19 @@ struct sof_ipc_dai_ssp_params {
 struct sof_ipc_dai_hda_params {
 	struct sof_ipc_hdr hdr;
 	uint32_t link_dma_ch;
+	uint32_t rate;
+	uint32_t channels;
 } __packed;
 
 /* ALH Configuration Request - SOF_IPC_DAI_ALH_CONFIG */
 struct sof_ipc_dai_alh_params {
 	struct sof_ipc_hdr hdr;
 	uint32_t stream_id;
+	uint32_t rate;
+	uint32_t channels;
 
 	/* reserved for future use */
-	uint32_t reserved[15];
+	uint32_t reserved[13];
 } __packed;
 
 /* DMIC Configuration Request - SOF_IPC_DAI_DMIC_CONFIG */
@@ -135,7 +142,7 @@ struct sof_ipc_dai_dmic_pdm_ctrl {
  * version number used in configuration data is checked vs. version used by
  * device driver src/drivers/dmic.c need to match. It is incremented from
  * initial value 1 if updates done for the to driver would alter the operation
- * of the microhone.
+ * of the microphone.
  *
  * Note: The microphone clock (pdmclk_min, pdmclk_max, duty_min, duty_max)
  * parameters need to be set as defined in microphone data sheet. E.g. clock
@@ -170,12 +177,13 @@ struct sof_ipc_dai_dmic_params {
 	uint32_t fifo_fs;	/**< FIFO sample rate in Hz (8000..96000) */
 	uint32_t reserved_1;	/**< Reserved */
 	uint16_t fifo_bits;	/**< FIFO word length (16 or 32) */
-	uint16_t reserved_2;	/**< Reserved */
+	uint16_t fifo_bits_b;	/**< Deprecated since firmware ABI 3.0.1 */
 
 	uint16_t duty_min;	/**< Min. mic clock duty cycle in % (20..80) */
 	uint16_t duty_max;	/**< Max. mic clock duty cycle in % (min..80) */
 
-	uint32_t num_pdm_active; /**< Number of active pdm controllers */
+	uint32_t num_pdm_active; /**< Number of active pdm controllers. */
+				 /**< Range is 1..SOF_DAI_INTEL_DMIC_NUM_CTRL */
 
 	uint32_t wake_up_time;      /**< Time from clock start to data (us) */
 	uint32_t min_clock_on_time; /**< Min. time that clk is kept on (us) */
@@ -184,8 +192,8 @@ struct sof_ipc_dai_dmic_params {
 	/* reserved for future use */
 	uint32_t reserved[5];
 
-	/**< variable number of pdm controller config */
-	struct sof_ipc_dai_dmic_pdm_ctrl pdm[0];
+	/**< PDM controllers configuration */
+	struct sof_ipc_dai_dmic_pdm_ctrl pdm[SOF_DAI_INTEL_DMIC_NUM_CTRL];
 } __packed;
 
 #endif
diff --git a/include/sound/sof/info.h b/include/sound/sof/info.h
index 438a11fcf272..d5eff3179a39 100644
--- a/include/sound/sof/info.h
+++ b/include/sound/sof/info.h
@@ -31,6 +31,8 @@ enum sof_ipc_ext_data {
 	SOF_IPC_EXT_UNUSED		= 0,
 	SOF_IPC_EXT_WINDOW		= 1,
 	SOF_IPC_EXT_CC_INFO		= 2,
+	SOF_IPC_EXT_PROBE_INFO		= 3,
+	SOF_IPC_EXT_USER_ABI_INFO	= 4,
 };
 
 /* FW version - SOF_IPC_GLB_VERSION */
@@ -109,9 +111,27 @@ struct sof_ipc_cc_version {
 	/* reserved for future use */
 	uint32_t reserved[4];
 
-	char name[16]; /* null terminated compiler name */
-	char optim[4]; /* null terminated compiler -O flag value */
-	char desc[]; /* null terminated compiler description */
+	uint8_t name[16]; /* null terminated compiler name */
+	uint8_t optim[4]; /* null terminated compiler -O flag value */
+	uint8_t desc[32]; /* null terminated compiler description */
 } __packed;
 
+/* extended data: Probe setup */
+struct sof_ipc_probe_support {
+	struct sof_ipc_ext_data_hdr ext_hdr;
+
+	uint32_t probe_points_max;
+	uint32_t injection_dmas_max;
+
+	/* reserved for future use */
+	uint32_t reserved[2];
+} __packed;
+
+/* extended data: user abi version(s) */
+struct sof_ipc_user_abi_version {
+	struct sof_ipc_ext_data_hdr ext_hdr;
+
+	uint32_t abi_dbg_version;
+}  __packed;
+
 #endif
diff --git a/include/sound/sof/topology.h b/include/sound/sof/topology.h
index 402e0250c508..08267d284edc 100644
--- a/include/sound/sof/topology.h
+++ b/include/sound/sof/topology.h
@@ -37,6 +37,7 @@ enum sof_comp_type {
 	SOF_COMP_SELECTOR,		/**< channel selector component */
 	SOF_COMP_DEMUX,
 	SOF_COMP_ASRC,		/**< Asynchronous sample rate converter */
+	SOF_COMP_DCBLOCK,
 	/* keep FILEREAD/FILEWRITE as the last ones */
 	SOF_COMP_FILEREAD = 10000,	/**< host test based file IO */
 	SOF_COMP_FILEWRITE = 10001,	/**< host test based file IO */
@@ -75,11 +76,23 @@ struct sof_ipc_comp {
 #define SOF_MEM_CAPS_CACHE			(1 << 6) /**< cacheable */
 #define SOF_MEM_CAPS_EXEC			(1 << 7) /**< executable */
 
+/*
+ * overrun will cause ring buffer overwrite, instead of XRUN.
+ */
+#define SOF_BUF_OVERRUN_PERMITTED	BIT(0)
+
+/*
+ * underrun will cause readback of 0s, instead of XRUN.
+ */
+#define SOF_BUF_UNDERRUN_PERMITTED	BIT(1)
+
 /* create new component buffer - SOF_IPC_TPLG_BUFFER_NEW */
 struct sof_ipc_buffer {
 	struct sof_ipc_comp comp;
 	uint32_t size;		/**< buffer size in bytes */
 	uint32_t caps;		/**< SOF_MEM_CAPS_ */
+	uint32_t flags;		/**< SOF_BUF_ flags defined above */
+	uint32_t reserved;	/**< reserved for future use */
 } __packed;
 
 /* generic component config data - must always be after struct sof_ipc_comp */
@@ -206,6 +219,7 @@ enum sof_ipc_process_type {
 	SOF_PROCESS_CHAN_SELECTOR,	/**< Channel Selector */
 	SOF_PROCESS_MUX,
 	SOF_PROCESS_DEMUX,
+	SOF_PROCESS_DCBLOCK,
 };
 
 /* generic "effect", "codec" or proprietary processing component */
@@ -218,7 +232,7 @@ struct sof_ipc_comp_process {
 	/* reserved for future use */
 	uint32_t reserved[7];
 
-	unsigned char data[0];
+	uint8_t data[0];
 } __packed;
 
 /* frees components, buffers and pipelines
diff --git a/include/sound/sof/trace.h b/include/sound/sof/trace.h
index fda6e8f6ead4..8056f214946d 100644
--- a/include/sound/sof/trace.h
+++ b/include/sound/sof/trace.h
@@ -72,7 +72,7 @@ struct sof_ipc_dma_trace_posn {
 struct sof_ipc_panic_info {
 	struct sof_ipc_hdr hdr;
 	uint32_t code;			/* SOF_IPC_PANIC_ */
-	char filename[SOF_TRACE_FILENAME_SIZE];
+	uint8_t filename[SOF_TRACE_FILENAME_SIZE];
 	uint32_t linenum;
 }  __packed;
 
diff --git a/include/target/iscsi/iscsi_target_core.h b/include/target/iscsi/iscsi_target_core.h
index 591cd9e4692c..4fda324f4b35 100644
--- a/include/target/iscsi/iscsi_target_core.h
+++ b/include/target/iscsi/iscsi_target_core.h
@@ -301,16 +301,6 @@ struct iscsi_queue_req {
 	struct list_head	qr_list;
 };
 
-struct iscsi_data_count {
-	int			data_length;
-	int			sync_and_steering;
-	enum data_count_type	type;
-	u32			iov_count;
-	u32			ss_iov_count;
-	u32			ss_marker_count;
-	struct kvec		*iov;
-};
-
 struct iscsi_param_list {
 	bool			iser;
 	struct list_head	param_list;
diff --git a/include/trace/events/compaction.h b/include/trace/events/compaction.h
index e5bf6ee4e814..54e5bf081171 100644
--- a/include/trace/events/compaction.h
+++ b/include/trace/events/compaction.h
@@ -314,40 +314,44 @@ TRACE_EVENT(mm_compaction_kcompactd_sleep,
 
 DECLARE_EVENT_CLASS(kcompactd_wake_template,
 
-	TP_PROTO(int nid, int order, enum zone_type classzone_idx),
+	TP_PROTO(int nid, int order, enum zone_type highest_zoneidx),
 
-	TP_ARGS(nid, order, classzone_idx),
+	TP_ARGS(nid, order, highest_zoneidx),
 
 	TP_STRUCT__entry(
 		__field(int, nid)
 		__field(int, order)
-		__field(enum zone_type, classzone_idx)
+		__field(enum zone_type, highest_zoneidx)
 	),
 
 	TP_fast_assign(
 		__entry->nid = nid;
 		__entry->order = order;
-		__entry->classzone_idx = classzone_idx;
+		__entry->highest_zoneidx = highest_zoneidx;
 	),
 
+	/*
+	 * classzone_idx is previous name of the highest_zoneidx.
+	 * Reason not to change it is the ABI requirement of the tracepoint.
+	 */
 	TP_printk("nid=%d order=%d classzone_idx=%-8s",
 		__entry->nid,
 		__entry->order,
-		__print_symbolic(__entry->classzone_idx, ZONE_TYPE))
+		__print_symbolic(__entry->highest_zoneidx, ZONE_TYPE))
 );
 
 DEFINE_EVENT(kcompactd_wake_template, mm_compaction_wakeup_kcompactd,
 
-	TP_PROTO(int nid, int order, enum zone_type classzone_idx),
+	TP_PROTO(int nid, int order, enum zone_type highest_zoneidx),
 
-	TP_ARGS(nid, order, classzone_idx)
+	TP_ARGS(nid, order, highest_zoneidx)
 );
 
 DEFINE_EVENT(kcompactd_wake_template, mm_compaction_kcompactd_wake,
 
-	TP_PROTO(int nid, int order, enum zone_type classzone_idx),
+	TP_PROTO(int nid, int order, enum zone_type highest_zoneidx),
 
-	TP_ARGS(nid, order, classzone_idx)
+	TP_ARGS(nid, order, highest_zoneidx)
 );
 #endif
 
diff --git a/include/trace/events/erofs.h b/include/trace/events/erofs.h
index 27f5caa6299a..bf9806fd1306 100644
--- a/include/trace/events/erofs.h
+++ b/include/trace/events/erofs.h
@@ -113,10 +113,10 @@ TRACE_EVENT(erofs_readpage,
 
 TRACE_EVENT(erofs_readpages,
 
-	TP_PROTO(struct inode *inode, struct page *page, unsigned int nrpage,
+	TP_PROTO(struct inode *inode, pgoff_t start, unsigned int nrpage,
 		bool raw),
 
-	TP_ARGS(inode, page, nrpage, raw),
+	TP_ARGS(inode, start, nrpage, raw),
 
 	TP_STRUCT__entry(
 		__field(dev_t,		dev	)
@@ -129,7 +129,7 @@ TRACE_EVENT(erofs_readpages,
 	TP_fast_assign(
 		__entry->dev	= inode->i_sb->s_dev;
 		__entry->nid	= EROFS_I(inode)->nid;
-		__entry->start	= page->index;
+		__entry->start	= start;
 		__entry->nrpage	= nrpage;
 		__entry->raw	= raw;
 	),
diff --git a/include/trace/events/f2fs.h b/include/trace/events/f2fs.h
index d97adfc327f0..d1c9bd60b443 100644
--- a/include/trace/events/f2fs.h
+++ b/include/trace/events/f2fs.h
@@ -1376,9 +1376,9 @@ TRACE_EVENT(f2fs_writepages,
 
 TRACE_EVENT(f2fs_readpages,
 
-	TP_PROTO(struct inode *inode, struct page *page, unsigned int nrpage),
+	TP_PROTO(struct inode *inode, pgoff_t start, unsigned int nrpage),
 
-	TP_ARGS(inode, page, nrpage),
+	TP_ARGS(inode, start, nrpage),
 
 	TP_STRUCT__entry(
 		__field(dev_t,	dev)
@@ -1390,7 +1390,7 @@ TRACE_EVENT(f2fs_readpages,
 	TP_fast_assign(
 		__entry->dev	= inode->i_sb->s_dev;
 		__entry->ino	= inode->i_ino;
-		__entry->start	= page->index;
+		__entry->start	= start;
 		__entry->nrpage	= nrpage;
 	),
 
@@ -1812,6 +1812,77 @@ DEFINE_EVENT(f2fs_zip_end, f2fs_decompress_pages_end,
 	TP_ARGS(inode, cluster_idx, compressed_size, ret)
 );
 
+TRACE_EVENT(f2fs_iostat,
+
+	TP_PROTO(struct f2fs_sb_info *sbi, unsigned long long *iostat),
+
+	TP_ARGS(sbi, iostat),
+
+	TP_STRUCT__entry(
+		__field(dev_t,	dev)
+		__field(unsigned long long,	app_dio)
+		__field(unsigned long long,	app_bio)
+		__field(unsigned long long,	app_wio)
+		__field(unsigned long long,	app_mio)
+		__field(unsigned long long,	fs_dio)
+		__field(unsigned long long,	fs_nio)
+		__field(unsigned long long,	fs_mio)
+		__field(unsigned long long,	fs_gc_dio)
+		__field(unsigned long long,	fs_gc_nio)
+		__field(unsigned long long,	fs_cp_dio)
+		__field(unsigned long long,	fs_cp_nio)
+		__field(unsigned long long,	fs_cp_mio)
+		__field(unsigned long long,	app_drio)
+		__field(unsigned long long,	app_brio)
+		__field(unsigned long long,	app_rio)
+		__field(unsigned long long,	app_mrio)
+		__field(unsigned long long,	fs_drio)
+		__field(unsigned long long,	fs_nrio)
+		__field(unsigned long long,	fs_mrio)
+		__field(unsigned long long,	fs_discard)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= sbi->sb->s_dev;
+		__entry->app_dio	= iostat[APP_DIRECT_IO];
+		__entry->app_bio	= iostat[APP_BUFFERED_IO];
+		__entry->app_wio	= iostat[APP_WRITE_IO];
+		__entry->app_mio	= iostat[APP_MAPPED_IO];
+		__entry->fs_dio		= iostat[FS_DATA_IO];
+		__entry->fs_nio		= iostat[FS_NODE_IO];
+		__entry->fs_mio		= iostat[FS_META_IO];
+		__entry->fs_gc_dio	= iostat[FS_GC_DATA_IO];
+		__entry->fs_gc_nio	= iostat[FS_GC_NODE_IO];
+		__entry->fs_cp_dio	= iostat[FS_CP_DATA_IO];
+		__entry->fs_cp_nio	= iostat[FS_CP_NODE_IO];
+		__entry->fs_cp_mio	= iostat[FS_CP_META_IO];
+		__entry->app_drio	= iostat[APP_DIRECT_READ_IO];
+		__entry->app_brio	= iostat[APP_BUFFERED_READ_IO];
+		__entry->app_rio	= iostat[APP_READ_IO];
+		__entry->app_mrio	= iostat[APP_MAPPED_READ_IO];
+		__entry->fs_drio	= iostat[FS_DATA_READ_IO];
+		__entry->fs_nrio	= iostat[FS_NODE_READ_IO];
+		__entry->fs_mrio	= iostat[FS_META_READ_IO];
+		__entry->fs_discard	= iostat[FS_DISCARD];
+	),
+
+	TP_printk("dev = (%d,%d), "
+		"app [write=%llu (direct=%llu, buffered=%llu), mapped=%llu], "
+		"fs [data=%llu, node=%llu, meta=%llu, discard=%llu], "
+		"gc [data=%llu, node=%llu], "
+		"cp [data=%llu, node=%llu, meta=%llu], "
+		"app [read=%llu (direct=%llu, buffered=%llu), mapped=%llu], "
+		"fs [data=%llu, node=%llu, meta=%llu]",
+		show_dev(__entry->dev), __entry->app_wio, __entry->app_dio,
+		__entry->app_bio, __entry->app_mio, __entry->fs_dio,
+		__entry->fs_nio, __entry->fs_mio, __entry->fs_discard,
+		__entry->fs_gc_dio, __entry->fs_gc_nio, __entry->fs_cp_dio,
+		__entry->fs_cp_nio, __entry->fs_cp_mio,
+		__entry->app_rio, __entry->app_drio, __entry->app_brio,
+		__entry->app_mrio, __entry->fs_drio, __entry->fs_nrio,
+		__entry->fs_mrio)
+);
+
 #endif /* _TRACE_F2FS_H */
 
  /* This part must be outside protection */
diff --git a/include/trace/events/huge_memory.h b/include/trace/events/huge_memory.h
index 70e32ff096ec..4fdb14a81108 100644
--- a/include/trace/events/huge_memory.h
+++ b/include/trace/events/huge_memory.h
@@ -12,6 +12,8 @@
 	EM( SCAN_SUCCEED,		"succeeded")			\
 	EM( SCAN_PMD_NULL,		"pmd_null")			\
 	EM( SCAN_EXCEED_NONE_PTE,	"exceed_none_pte")		\
+	EM( SCAN_EXCEED_SWAP_PTE,	"exceed_swap_pte")		\
+	EM( SCAN_EXCEED_SHARED_PTE,	"exceed_shared_pte")		\
 	EM( SCAN_PTE_NON_PRESENT,	"pte_non_present")		\
 	EM( SCAN_PTE_UFFD_WP,		"pte_uffd_wp")			\
 	EM( SCAN_PAGE_RO,		"no_writable_page")		\
@@ -31,7 +33,6 @@
 	EM( SCAN_DEL_PAGE_LRU,		"could_not_delete_page_from_lru")\
 	EM( SCAN_ALLOC_HUGE_PAGE_FAIL,	"alloc_huge_page_failed")	\
 	EM( SCAN_CGROUP_CHARGE_FAIL,	"ccgroup_charge_failed")	\
-	EM( SCAN_EXCEED_SWAP_PTE,	"exceed_swap_pte")		\
 	EM( SCAN_TRUNCATED,		"truncated")			\
 	EMe(SCAN_PAGE_HAS_PRIVATE,	"page_has_private")		\
 
diff --git a/include/trace/events/qrtr.h b/include/trace/events/qrtr.h
new file mode 100644
index 000000000000..b1de14c3bb93
--- /dev/null
+++ b/include/trace/events/qrtr.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM qrtr
+
+#if !defined(_TRACE_QRTR_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_QRTR_H
+
+#include <linux/qrtr.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(qrtr_ns_service_announce_new,
+
+	TP_PROTO(__le32 service, __le32 instance, __le32 node, __le32 port),
+
+	TP_ARGS(service, instance, node, port),
+
+	TP_STRUCT__entry(
+		__field(__le32, service)
+		__field(__le32, instance)
+		__field(__le32, node)
+		__field(__le32, port)
+	),
+
+	TP_fast_assign(
+		__entry->service = service;
+		__entry->instance = instance;
+		__entry->node = node;
+		__entry->port = port;
+	),
+
+	TP_printk("advertising new server [%d:%x]@[%d:%d]",
+		  __entry->service, __entry->instance, __entry->node,
+		  __entry->port
+	)
+);
+
+TRACE_EVENT(qrtr_ns_service_announce_del,
+
+	TP_PROTO(__le32 service, __le32 instance, __le32 node, __le32 port),
+
+	TP_ARGS(service, instance, node, port),
+
+	TP_STRUCT__entry(
+		__field(__le32, service)
+		__field(__le32, instance)
+		__field(__le32, node)
+		__field(__le32, port)
+	),
+
+	TP_fast_assign(
+		__entry->service = service;
+		__entry->instance = instance;
+		__entry->node = node;
+		__entry->port = port;
+	),
+
+	TP_printk("advertising removal of server [%d:%x]@[%d:%d]",
+		  __entry->service, __entry->instance, __entry->node,
+		  __entry->port
+	)
+);
+
+TRACE_EVENT(qrtr_ns_server_add,
+
+	TP_PROTO(__le32 service, __le32 instance, __le32 node, __le32 port),
+
+	TP_ARGS(service, instance, node, port),
+
+	TP_STRUCT__entry(
+		__field(__le32, service)
+		__field(__le32, instance)
+		__field(__le32, node)
+		__field(__le32, port)
+	),
+
+	TP_fast_assign(
+		__entry->service = service;
+		__entry->instance = instance;
+		__entry->node = node;
+		__entry->port = port;
+	),
+
+	TP_printk("add server [%d:%x]@[%d:%d]",
+		  __entry->service, __entry->instance, __entry->node,
+		  __entry->port
+	)
+);
+
+TRACE_EVENT(qrtr_ns_message,
+
+	TP_PROTO(const char * const ctrl_pkt_str, __u32 sq_node, __u32 sq_port),
+
+	TP_ARGS(ctrl_pkt_str, sq_node, sq_port),
+
+	TP_STRUCT__entry(
+		__string(ctrl_pkt_str, ctrl_pkt_str)
+		__field(__u32, sq_node)
+		__field(__u32, sq_port)
+	),
+
+	TP_fast_assign(
+		__assign_str(ctrl_pkt_str, ctrl_pkt_str);
+		__entry->sq_node = sq_node;
+		__entry->sq_port = sq_port;
+	),
+
+	TP_printk("%s from %d:%d",
+		  __get_str(ctrl_pkt_str), __entry->sq_node, __entry->sq_port
+	)
+);
+
+#endif /* _TRACE_QRTR_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h
index 74bb594ccb25..2070df64958e 100644
--- a/include/trace/events/vmscan.h
+++ b/include/trace/events/vmscan.h
@@ -265,7 +265,7 @@ TRACE_EVENT(mm_shrink_slab_end,
 );
 
 TRACE_EVENT(mm_vmscan_lru_isolate,
-	TP_PROTO(int classzone_idx,
+	TP_PROTO(int highest_zoneidx,
 		int order,
 		unsigned long nr_requested,
 		unsigned long nr_scanned,
@@ -274,10 +274,10 @@ TRACE_EVENT(mm_vmscan_lru_isolate,
 		isolate_mode_t isolate_mode,
 		int lru),
 
-	TP_ARGS(classzone_idx, order, nr_requested, nr_scanned, nr_skipped, nr_taken, isolate_mode, lru),
+	TP_ARGS(highest_zoneidx, order, nr_requested, nr_scanned, nr_skipped, nr_taken, isolate_mode, lru),
 
 	TP_STRUCT__entry(
-		__field(int, classzone_idx)
+		__field(int, highest_zoneidx)
 		__field(int, order)
 		__field(unsigned long, nr_requested)
 		__field(unsigned long, nr_scanned)
@@ -288,7 +288,7 @@ TRACE_EVENT(mm_vmscan_lru_isolate,
 	),
 
 	TP_fast_assign(
-		__entry->classzone_idx = classzone_idx;
+		__entry->highest_zoneidx = highest_zoneidx;
 		__entry->order = order;
 		__entry->nr_requested = nr_requested;
 		__entry->nr_scanned = nr_scanned;
@@ -298,9 +298,13 @@ TRACE_EVENT(mm_vmscan_lru_isolate,
 		__entry->lru = lru;
 	),
 
+	/*
+	 * classzone is previous name of the highest_zoneidx.
+	 * Reason not to change it is the ABI requirement of the tracepoint.
+	 */
 	TP_printk("isolate_mode=%d classzone=%d order=%d nr_requested=%lu nr_scanned=%lu nr_skipped=%lu nr_taken=%lu lru=%s",
 		__entry->isolate_mode,
-		__entry->classzone_idx,
+		__entry->highest_zoneidx,
 		__entry->order,
 		__entry->nr_requested,
 		__entry->nr_scanned,
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index 3a3201e4618e..7fde54d6a8ac 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -855,9 +855,12 @@ __SYSCALL(__NR_clone3, sys_clone3)
 __SYSCALL(__NR_openat2, sys_openat2)
 #define __NR_pidfd_getfd 438
 __SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd)
+#define __NR_process_madvise 439
+__SC_COMP(__NR_process_madvise, sys_process_madvise, \
+		compat_sys_process_madvise)
 
 #undef __NR_syscalls
-#define __NR_syscalls 439
+#define __NR_syscalls 440
 
 /*
  * 32 bit systems traditionally used different
diff --git a/include/uapi/drm/amdgpu_drm.h b/include/uapi/drm/amdgpu_drm.h
index 65f69723cbdc..4e873dcbe68f 100644
--- a/include/uapi/drm/amdgpu_drm.h
+++ b/include/uapi/drm/amdgpu_drm.h
@@ -133,6 +133,11 @@ extern "C" {
  * releasing the memory
  */
 #define AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE	(1 << 9)
+/* Flag that BO will be encrypted and that the TMZ bit should be
+ * set in the PTEs when mapping this buffer via GPUVM or
+ * accessing it with various hw blocks
+ */
+#define AMDGPU_GEM_CREATE_ENCRYPTED		(1 << 10)
 
 struct drm_amdgpu_gem_create_in  {
 	/** the requested memory size */
@@ -346,6 +351,10 @@ struct drm_amdgpu_gem_userptr {
 #define AMDGPU_TILING_DCC_PITCH_MAX_MASK		0x3FFF
 #define AMDGPU_TILING_DCC_INDEPENDENT_64B_SHIFT		43
 #define AMDGPU_TILING_DCC_INDEPENDENT_64B_MASK		0x1
+#define AMDGPU_TILING_DCC_INDEPENDENT_128B_SHIFT	44
+#define AMDGPU_TILING_DCC_INDEPENDENT_128B_MASK		0x1
+#define AMDGPU_TILING_SCANOUT_SHIFT			63
+#define AMDGPU_TILING_SCANOUT_MASK			0x1
 
 /* Set/Get helpers for tiling flags. */
 #define AMDGPU_TILING_SET(field, value) \
@@ -555,7 +564,7 @@ struct drm_amdgpu_cs_in {
 	/**  Handle of resource list associated with CS */
 	__u32		bo_list_handle;
 	__u32		num_chunks;
-	__u32		_pad;
+	__u32		flags;
 	/** this points to __u64 * which point to cs chunks */
 	__u64		chunks;
 };
@@ -589,6 +598,14 @@ union drm_amdgpu_cs {
  */
 #define AMDGPU_IB_FLAG_RESET_GDS_MAX_WAVE_ID (1 << 4)
 
+/* Flag the IB as secure (TMZ)
+ */
+#define AMDGPU_IB_FLAGS_SECURE  (1 << 5)
+
+/* Tell KMD to flush and invalidate caches
+ */
+#define AMDGPU_IB_FLAG_EMIT_MEM_SYNC  (1 << 6)
+
 struct drm_amdgpu_cs_chunk_ib {
 	__u32 _pad;
 	/** AMDGPU_IB_FLAG_* */
diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
index 2813e579b480..14b67cd6b54b 100644
--- a/include/uapi/drm/i915_drm.h
+++ b/include/uapi/drm/i915_drm.h
@@ -1969,6 +1969,30 @@ enum drm_i915_perf_property_id {
 	 */
 	DRM_I915_PERF_PROP_HOLD_PREEMPTION,
 
+	/**
+	 * Specifying this pins all contexts to the specified SSEU power
+	 * configuration for the duration of the recording.
+	 *
+	 * This parameter's value is a pointer to a struct
+	 * drm_i915_gem_context_param_sseu.
+	 *
+	 * This property is available in perf revision 4.
+	 */
+	DRM_I915_PERF_PROP_GLOBAL_SSEU,
+
+	/**
+	 * This optional parameter specifies the timer interval in nanoseconds
+	 * at which the i915 driver will check the OA buffer for available data.
+	 * Minimum allowed value is 100 microseconds. A default value is used by
+	 * the driver if this parameter is not specified. Note that larger timer
+	 * values will reduce cpu consumption during OA perf captures. However,
+	 * excessively large values would potentially result in OA buffer
+	 * overwrites as captures reach end of the OA buffer.
+	 *
+	 * This property is available in perf revision 5.
+	 */
+	DRM_I915_PERF_PROP_POLL_OA_PERIOD,
+
 	DRM_I915_PERF_PROP_MAX /* non-ABI */
 };
 
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index a534d71e689a..9b6a973f4cc3 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -117,6 +117,7 @@
 #define AUDIT_TIME_INJOFFSET	1332	/* Timekeeping offset injected */
 #define AUDIT_TIME_ADJNTPVAL	1333	/* NTP value adjustment */
 #define AUDIT_BPF		1334	/* BPF subsystem */
+#define AUDIT_EVENT_LISTENER	1335	/* Task joined multicast read socket */
 
 #define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
 #define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 7bbf1b65be10..2446f21aa084 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -73,7 +73,7 @@ struct bpf_insn {
 /* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */
 struct bpf_lpm_trie_key {
 	__u32	prefixlen;	/* up to 32 for AF_INET, 128 for AF_INET6 */
-	__u8	data[];	/* Arbitrary size */
+	__u8	data[0];	/* Arbitrary size */
 };
 
 struct bpf_cgroup_storage_key {
@@ -113,6 +113,8 @@ enum bpf_cmd {
 	BPF_MAP_DELETE_BATCH,
 	BPF_LINK_CREATE,
 	BPF_LINK_UPDATE,
+	BPF_LINK_GET_FD_BY_ID,
+	BPF_LINK_GET_NEXT_ID,
 };
 
 enum bpf_map_type {
@@ -220,6 +222,15 @@ enum bpf_attach_type {
 
 #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
 
+enum bpf_link_type {
+	BPF_LINK_TYPE_UNSPEC = 0,
+	BPF_LINK_TYPE_RAW_TRACEPOINT = 1,
+	BPF_LINK_TYPE_TRACING = 2,
+	BPF_LINK_TYPE_CGROUP = 3,
+
+	MAX_BPF_LINK_TYPE,
+};
+
 /* cgroup-bpf attach flags used in BPF_PROG_ATTACH command
  *
  * NONE(default): No further bpf programs allowed in the subtree.
@@ -523,6 +534,7 @@ union bpf_attr {
 			__u32		prog_id;
 			__u32		map_id;
 			__u32		btf_id;
+			__u32		link_id;
 		};
 		__u32		next_id;
 		__u32		open_flags;
@@ -652,6 +664,8 @@ union bpf_attr {
  * u64 bpf_ktime_get_ns(void)
  * 	Description
  * 		Return the time elapsed since system boot, in nanoseconds.
+ * 		Does not include time the system was suspended.
+ * 		See: clock_gettime(CLOCK_MONOTONIC)
  * 	Return
  * 		Current *ktime*.
  *
@@ -3025,6 +3039,14 @@ union bpf_attr {
  *		* **-EOPNOTSUPP**	Unsupported operation, for example a
  *					call from outside of TC ingress.
  *		* **-ESOCKTNOSUPPORT**	Socket type not supported (reuseport).
+ *
+ * u64 bpf_ktime_get_boot_ns(void)
+ * 	Description
+ * 		Return the time elapsed since system boot, in nanoseconds.
+ * 		Does include the time the system was suspended.
+ * 		See: clock_gettime(CLOCK_BOOTTIME)
+ * 	Return
+ * 		Current *ktime*.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -3151,7 +3173,8 @@ union bpf_attr {
 	FN(xdp_output),			\
 	FN(get_netns_cookie),		\
 	FN(get_current_ancestor_cgroup_id),	\
-	FN(sk_assign),
+	FN(sk_assign),			\
+	FN(ktime_get_boot_ns),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -3598,6 +3621,25 @@ struct bpf_btf_info {
 	__u32 id;
 } __attribute__((aligned(8)));
 
+struct bpf_link_info {
+	__u32 type;
+	__u32 id;
+	__u32 prog_id;
+	union {
+		struct {
+			__aligned_u64 tp_name; /* in/out: tp_name buffer ptr */
+			__u32 tp_name_len;     /* in/out: tp_name buffer len */
+		} raw_tracepoint;
+		struct {
+			__u32 attach_type;
+		} tracing;
+		struct {
+			__u64 cgroup_id;
+			__u32 attach_type;
+		} cgroup;
+	};
+} __attribute__((aligned(8)));
+
 /* User bpf_sock_addr struct to access socket fields and sockaddr struct passed
  * by user and intended to be used by socket (e.g. to bind to, depends on
  * attach attach type).
diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
index 272dc69fa080..e58c9636741b 100644
--- a/include/uapi/linux/capability.h
+++ b/include/uapi/linux/capability.h
@@ -367,8 +367,14 @@ struct vfs_ns_cap_data {
 
 #define CAP_AUDIT_READ		37
 
+/*
+ * Allow system performance and observability privileged operations
+ * using perf_events, i915_perf and other kernel subsystems
+ */
+
+#define CAP_PERFMON		38
 
-#define CAP_LAST_CAP         CAP_AUDIT_READ
+#define CAP_LAST_CAP         CAP_PERFMON
 
 #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
 
diff --git a/include/uapi/linux/dlm_device.h b/include/uapi/linux/dlm_device.h
index e83954c69fff..f880d2831160 100644
--- a/include/uapi/linux/dlm_device.h
+++ b/include/uapi/linux/dlm_device.h
@@ -45,13 +45,13 @@ struct dlm_lock_params {
 	void __user *bastaddr;
 	struct dlm_lksb __user *lksb;
 	char lvb[DLM_USER_LVB_LEN];
-	char name[];
+	char name[0];
 };
 
 struct dlm_lspace_params {
 	__u32 flags;
 	__u32 minor;
-	char name[];
+	char name[0];
 };
 
 struct dlm_purge_params {
diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h
index dbc7092e04b5..7f30393b92c3 100644
--- a/include/uapi/linux/dma-buf.h
+++ b/include/uapi/linux/dma-buf.h
@@ -39,6 +39,12 @@ struct dma_buf_sync {
 
 #define DMA_BUF_BASE		'b'
 #define DMA_BUF_IOCTL_SYNC	_IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
+
+/* 32/64bitness of this uapi was botched in android, there's no difference
+ * between them in actual uapi, they're just different numbers.
+ */
 #define DMA_BUF_SET_NAME	_IOW(DMA_BUF_BASE, 1, const char *)
+#define DMA_BUF_SET_NAME_A	_IOW(DMA_BUF_BASE, 1, u32)
+#define DMA_BUF_SET_NAME_B	_IOW(DMA_BUF_BASE, 1, u64)
 
 #endif
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
index 34c02e4290fe..c6dd0215482e 100644
--- a/include/uapi/linux/elf.h
+++ b/include/uapi/linux/elf.h
@@ -36,6 +36,7 @@ typedef __s64	Elf64_Sxword;
 #define PT_LOPROC  0x70000000
 #define PT_HIPROC  0x7fffffff
 #define PT_GNU_EH_FRAME		0x6474e550
+#define PT_GNU_PROPERTY		0x6474e553
 
 #define PT_GNU_STACK	(PT_LOOS + 0x474e551)
 
@@ -367,6 +368,7 @@ typedef struct elf64_shdr {
  * Notes used in ET_CORE. Architectures export some of the arch register sets
  * using the corresponding note types via the PTRACE_GETREGSET and
  * PTRACE_SETREGSET requests.
+ * The note name for all these is "LINUX".
  */
 #define NT_PRSTATUS	1
 #define NT_PRFPREG	2
@@ -429,6 +431,9 @@ typedef struct elf64_shdr {
 #define NT_MIPS_FP_MODE	0x801		/* MIPS floating-point mode */
 #define NT_MIPS_MSA	0x802		/* MIPS SIMD registers */
 
+/* Note types with note name "GNU" */
+#define NT_GNU_PROPERTY_TYPE_0	5
+
 /* Note header in a PT_NOTE section */
 typedef struct elf32_note {
   Elf32_Word	n_namesz;	/* Name size */
@@ -443,4 +448,10 @@ typedef struct elf64_note {
   Elf64_Word n_type;	/* Content type */
 } Elf64_Nhdr;
 
+/* .note.gnu.property types for EM_AARCH64: */
+#define GNU_PROPERTY_AARCH64_FEATURE_1_AND	0xc0000000
+
+/* Bits for GNU_PROPERTY_AARCH64_FEATURE_1_BTI */
+#define GNU_PROPERTY_AARCH64_FEATURE_1_BTI	(1U << 0)
+
 #endif /* _UAPI_LINUX_ELF_H */
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 7fde76366ba4..1711e57f7848 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -2,7 +2,7 @@
 /*
  * include/uapi/linux/ethtool_netlink.h - netlink interface for ethtool
  *
- * See Documentation/networking/ethtool-netlink.txt in kernel source tree for
+ * See Documentation/networking/ethtool-netlink.rst in kernel source tree for
  * doucumentation of the interface.
  */
 
diff --git a/include/uapi/linux/fiemap.h b/include/uapi/linux/fiemap.h
index 7a900b2377b6..8c0bc24d5d95 100644
--- a/include/uapi/linux/fiemap.h
+++ b/include/uapi/linux/fiemap.h
@@ -34,7 +34,7 @@ struct fiemap {
 	__u32 fm_mapped_extents;/* number of extents that were mapped (out) */
 	__u32 fm_extent_count;  /* size of fm_extents array (in) */
 	__u32 fm_reserved;
-	struct fiemap_extent fm_extents[]; /* array of mapped extents (out) */
+	struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */
 };
 
 #define FIEMAP_MAX_OFFSET	(~0ULL)
diff --git a/include/uapi/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h
index 1acd2b179aef..7e5b5c10a49c 100644
--- a/include/uapi/linux/firewire-cdev.h
+++ b/include/uapi/linux/firewire-cdev.h
@@ -308,7 +308,7 @@ struct fw_cdev_event_iso_interrupt_mc {
 /**
  * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
  * @closure:	See &fw_cdev_event_common;
- *		set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
+ *		set by``FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE)`` ioctl
  * @type:	%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
  *		%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
  * @handle:	Reference by which an allocated resource can be deallocated
diff --git a/include/uapi/linux/hyperv.h b/include/uapi/linux/hyperv.h
index 991b2b7ada7a..8f24404ad04f 100644
--- a/include/uapi/linux/hyperv.h
+++ b/include/uapi/linux/hyperv.h
@@ -119,8 +119,8 @@ enum hv_fcopy_op {
 
 struct hv_fcopy_hdr {
 	__u32 operation;
-	uuid_le service_id0; /* currently unused */
-	uuid_le service_id1; /* currently unused */
+	__u8 service_id0[16]; /* currently unused */
+	__u8 service_id1[16]; /* currently unused */
 } __attribute__((packed));
 
 #define OVER_WRITE	0x1
diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h
index be714cd8c826..797ba2c1562a 100644
--- a/include/uapi/linux/if.h
+++ b/include/uapi/linux/if.h
@@ -178,6 +178,7 @@ enum {
 enum {
 	IF_LINK_MODE_DEFAULT,
 	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
+	IF_LINK_MODE_TESTING,	/* limit upward transition to testing */
 };
 
 /*
diff --git a/include/uapi/linux/if_arcnet.h b/include/uapi/linux/if_arcnet.h
index b122cfac7128..683878036d76 100644
--- a/include/uapi/linux/if_arcnet.h
+++ b/include/uapi/linux/if_arcnet.h
@@ -60,7 +60,7 @@ struct arc_rfc1201 {
 	__u8  proto;		/* protocol ID field - varies		*/
 	__u8  split_flag;	/* for use with split packets		*/
 	__be16   sequence;	/* sequence number			*/
-	__u8  payload[];	/* space remaining in packet (504 bytes)*/
+	__u8  payload[0];	/* space remaining in packet (504 bytes)*/
 };
 #define RFC1201_HDR_SIZE 4
 
@@ -69,7 +69,7 @@ struct arc_rfc1201 {
  */
 struct arc_rfc1051 {
 	__u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
-	__u8 payload[];	/* 507 bytes			*/
+	__u8 payload[0];	/* 507 bytes			*/
 };
 #define RFC1051_HDR_SIZE 1
 
@@ -80,7 +80,7 @@ struct arc_rfc1051 {
 struct arc_eth_encap {
 	__u8 proto;		/* Always ARC_P_ETHER			*/
 	struct ethhdr eth;	/* standard ethernet header (yuck!)	*/
-	__u8 payload[];	/* 493 bytes				*/
+	__u8 payload[0];	/* 493 bytes				*/
 };
 #define ETH_ENCAP_HDR_SIZE 14
 
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index bfe621ea51b3..bd8c95488f16 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -120,6 +120,7 @@ enum {
 	IFLA_BRIDGE_MODE,
 	IFLA_BRIDGE_VLAN_INFO,
 	IFLA_BRIDGE_VLAN_TUNNEL_INFO,
+	IFLA_BRIDGE_MRP,
 	__IFLA_BRIDGE_MAX,
 };
 #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
@@ -157,6 +158,47 @@ struct bridge_vlan_xstats {
 	__u32 pad2;
 };
 
+enum {
+	IFLA_BRIDGE_MRP_UNSPEC,
+	IFLA_BRIDGE_MRP_INSTANCE,
+	IFLA_BRIDGE_MRP_PORT_STATE,
+	IFLA_BRIDGE_MRP_PORT_ROLE,
+	IFLA_BRIDGE_MRP_RING_STATE,
+	IFLA_BRIDGE_MRP_RING_ROLE,
+	IFLA_BRIDGE_MRP_START_TEST,
+	__IFLA_BRIDGE_MRP_MAX,
+};
+
+struct br_mrp_instance {
+	__u32 ring_id;
+	__u32 p_ifindex;
+	__u32 s_ifindex;
+};
+
+struct br_mrp_port_role {
+	__u32 ring_id;
+	__u32 role;
+};
+
+struct br_mrp_ring_state {
+	__u32 ring_id;
+	__u32 ring_state;
+};
+
+struct br_mrp_ring_role {
+	__u32 ring_id;
+	__u32 ring_role;
+};
+
+struct br_mrp_start_test {
+	__u32 ring_id;
+	__u32 interval;
+	__u32 max_miss;
+	__u32 period;
+};
+
+#define IFLA_BRIDGE_MRP_MAX (__IFLA_BRIDGE_MRP_MAX - 1)
+
 struct bridge_stp_xstats {
 	__u64 transition_blk;
 	__u64 transition_fwd;
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index f6ceb2e63d1e..d6de2b167448 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -92,6 +92,7 @@
 #define ETH_P_PREAUTH	0x88C7		/* 802.11 Preauthentication */
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
 #define ETH_P_LLDP	0x88CC		/* Link Layer Discovery Protocol */
+#define ETH_P_MRP	0x88E3		/* Media Redundancy Protocol	*/
 #define ETH_P_MACSEC	0x88E5		/* 802.1ae MACsec */
 #define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
 #define ETH_P_MVRP	0x88F5          /* 802.1Q MVRP                  */
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 127c704eeba9..a009365ad67b 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -343,6 +343,7 @@ enum {
 	IFLA_BRPORT_NEIGH_SUPPRESS,
 	IFLA_BRPORT_ISOLATED,
 	IFLA_BRPORT_BACKUP_PORT,
+	IFLA_BRPORT_MRP_RING_OPEN,
 	__IFLA_BRPORT_MAX
 };
 #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
diff --git a/include/uapi/linux/keyctl.h b/include/uapi/linux/keyctl.h
index ed3d5893830d..4c8884eea808 100644
--- a/include/uapi/linux/keyctl.h
+++ b/include/uapi/linux/keyctl.h
@@ -69,6 +69,7 @@
 #define KEYCTL_RESTRICT_KEYRING		29	/* Restrict keys allowed to link to a keyring */
 #define KEYCTL_MOVE			30	/* Move keys between keyrings */
 #define KEYCTL_CAPABILITIES		31	/* Find capabilities of keyrings subsystem */
+#define KEYCTL_WATCH_KEY		32	/* Watch a key or ring of keys for changes */
 
 /* keyctl structures */
 struct keyctl_dh_params {
@@ -130,5 +131,6 @@ struct keyctl_pkey_params {
 #define KEYCTL_CAPS0_MOVE		0x80 /* KEYCTL_MOVE supported */
 #define KEYCTL_CAPS1_NS_KEYRING_NAME	0x01 /* Keyring names are per-user_namespace */
 #define KEYCTL_CAPS1_NS_KEY_TAG		0x02 /* Key indexing can include a namespace tag */
+#define KEYCTL_CAPS1_NOTIFICATIONS	0x04 /* Keys generate watchable notifications */
 
 #endif /*  _LINUX_KEYCTL_H */
diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h
index 20917c59f39c..4f6676428c5c 100644
--- a/include/uapi/linux/kfd_ioctl.h
+++ b/include/uapi/linux/kfd_ioctl.h
@@ -410,6 +410,20 @@ struct kfd_ioctl_unmap_memory_from_gpu_args {
 	__u32 n_success;		/* to/from KFD */
 };
 
+/* Allocate GWS for specific queue
+ *
+ * @queue_id:    queue's id that GWS is allocated for
+ * @num_gws:     how many GWS to allocate
+ * @first_gws:   index of the first GWS allocated.
+ *               only support contiguous GWS allocation
+ */
+struct kfd_ioctl_alloc_queue_gws_args {
+	__u32 queue_id;		/* to KFD */
+	__u32 num_gws;		/* to KFD */
+	__u32 first_gws;	/* from KFD */
+	__u32 pad;
+};
+
 struct kfd_ioctl_get_dmabuf_info_args {
 	__u64 size;		/* from KFD */
 	__u64 metadata_ptr;	/* to KFD */
@@ -529,7 +543,10 @@ enum kfd_mmio_remap {
 #define AMDKFD_IOC_IMPORT_DMABUF		\
 		AMDKFD_IOWR(0x1D, struct kfd_ioctl_import_dmabuf_args)
 
+#define AMDKFD_IOC_ALLOC_QUEUE_GWS		\
+		AMDKFD_IOWR(0x1E, struct kfd_ioctl_alloc_queue_gws_args)
+
 #define AMDKFD_COMMAND_START		0x01
-#define AMDKFD_COMMAND_END		0x1E
+#define AMDKFD_COMMAND_END		0x1F
 
 #endif
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 428c7dde6b4b..addacc16f7aa 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -116,7 +116,7 @@ struct kvm_irq_level {
 	 * ACPI gsi notion of irq.
 	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
 	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
-	 * For ARM: See Documentation/virt/kvm/api.txt
+	 * For ARM: See Documentation/virt/kvm/api.rst
 	 */
 	union {
 		__u32 irq;
@@ -1017,6 +1017,7 @@ struct kvm_ppc_resize_hpt {
 #define KVM_CAP_S390_VCPU_RESETS 179
 #define KVM_CAP_S390_PROTECTED 180
 #define KVM_CAP_PPC_SECURE_GUEST 181
+#define KVM_CAP_HALT_POLL 182
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -1107,7 +1108,7 @@ struct kvm_xen_hvm_config {
  *
  * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
  * the irqfd to operate in resampling mode for level triggered interrupt
- * emulation.  See Documentation/virt/kvm/api.txt.
+ * emulation.  See Documentation/virt/kvm/api.rst.
  */
 #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
 
diff --git a/include/uapi/linux/mmc/ioctl.h b/include/uapi/linux/mmc/ioctl.h
index 98e29e7f54ac..00c08120f3ba 100644
--- a/include/uapi/linux/mmc/ioctl.h
+++ b/include/uapi/linux/mmc/ioctl.h
@@ -57,7 +57,7 @@ struct mmc_ioc_cmd {
  */
 struct mmc_ioc_multi_cmd {
 	__u64 num_of_cmds;
-	struct mmc_ioc_cmd cmds[];
+	struct mmc_ioc_cmd cmds[0];
 };
 
 #define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
diff --git a/include/uapi/linux/mrp_bridge.h b/include/uapi/linux/mrp_bridge.h
new file mode 100644
index 000000000000..2600cdf5a284
--- /dev/null
+++ b/include/uapi/linux/mrp_bridge.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+
+#ifndef _UAPI_LINUX_MRP_BRIDGE_H_
+#define _UAPI_LINUX_MRP_BRIDGE_H_
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#define MRP_MAX_FRAME_LENGTH		200
+#define MRP_DEFAULT_PRIO		0x8000
+#define MRP_DOMAIN_UUID_LENGTH		16
+#define MRP_VERSION			1
+#define MRP_FRAME_PRIO			7
+
+enum br_mrp_ring_role_type {
+	BR_MRP_RING_ROLE_DISABLED,
+	BR_MRP_RING_ROLE_MRC,
+	BR_MRP_RING_ROLE_MRM,
+};
+
+enum br_mrp_ring_state_type {
+	BR_MRP_RING_STATE_OPEN,
+	BR_MRP_RING_STATE_CLOSED,
+};
+
+enum br_mrp_port_state_type {
+	BR_MRP_PORT_STATE_DISABLED,
+	BR_MRP_PORT_STATE_BLOCKED,
+	BR_MRP_PORT_STATE_FORWARDING,
+	BR_MRP_PORT_STATE_NOT_CONNECTED,
+};
+
+enum br_mrp_port_role_type {
+	BR_MRP_PORT_ROLE_PRIMARY,
+	BR_MRP_PORT_ROLE_SECONDARY,
+	BR_MRP_PORT_ROLE_NONE,
+};
+
+enum br_mrp_tlv_header_type {
+	BR_MRP_TLV_HEADER_END = 0x0,
+	BR_MRP_TLV_HEADER_COMMON = 0x1,
+	BR_MRP_TLV_HEADER_RING_TEST = 0x2,
+	BR_MRP_TLV_HEADER_RING_TOPO = 0x3,
+	BR_MRP_TLV_HEADER_RING_LINK_DOWN = 0x4,
+	BR_MRP_TLV_HEADER_RING_LINK_UP = 0x5,
+};
+
+struct br_mrp_tlv_hdr {
+	__u8 type;
+	__u8 length;
+};
+
+struct br_mrp_end_hdr {
+	struct br_mrp_tlv_hdr hdr;
+};
+
+struct br_mrp_common_hdr {
+	__u16 seq_id;
+	__u8 domain[MRP_DOMAIN_UUID_LENGTH];
+};
+
+struct br_mrp_ring_test_hdr {
+	__u16 prio;
+	__u8 sa[ETH_ALEN];
+	__u16 port_role;
+	__u16 state;
+	__u16 transitions;
+	__u32 timestamp;
+};
+
+struct br_mrp_ring_topo_hdr {
+	__u16 prio;
+	__u8 sa[ETH_ALEN];
+	__u16 interval;
+};
+
+struct br_mrp_ring_link_hdr {
+	__u8 sa[ETH_ALEN];
+	__u16 port_role;
+	__u16 interval;
+	__u16 blocked;
+};
+
+#endif
diff --git a/include/uapi/linux/net_dropmon.h b/include/uapi/linux/net_dropmon.h
index 67e31f329190..66048cc5d7b3 100644
--- a/include/uapi/linux/net_dropmon.h
+++ b/include/uapi/linux/net_dropmon.h
@@ -29,12 +29,12 @@ struct net_dm_config_entry {
 
 struct net_dm_config_msg {
 	__u32 entries;
-	struct net_dm_config_entry options[];
+	struct net_dm_config_entry options[0];
 };
 
 struct net_dm_alert_msg {
 	__u32 entries;
-	struct net_dm_drop_point points[];
+	struct net_dm_drop_point points[0];
 };
 
 struct net_dm_user_msg {
diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h
index b6f0bb1dc799..4b3395082d15 100644
--- a/include/uapi/linux/netfilter/nf_conntrack_common.h
+++ b/include/uapi/linux/netfilter/nf_conntrack_common.h
@@ -114,15 +114,19 @@ enum ip_conntrack_status {
 	IPS_OFFLOAD_BIT = 14,
 	IPS_OFFLOAD = (1 << IPS_OFFLOAD_BIT),
 
+	/* Conntrack has been offloaded to hardware. */
+	IPS_HW_OFFLOAD_BIT = 15,
+	IPS_HW_OFFLOAD = (1 << IPS_HW_OFFLOAD_BIT),
+
 	/* Be careful here, modifying these bits can make things messy,
 	 * so don't let users modify them directly.
 	 */
 	IPS_UNCHANGEABLE_MASK = (IPS_NAT_DONE_MASK | IPS_NAT_MASK |
 				 IPS_EXPECTED | IPS_CONFIRMED | IPS_DYING |
 				 IPS_SEQ_ADJUST | IPS_TEMPLATE | IPS_UNTRACKED |
-				 IPS_OFFLOAD),
+				 IPS_OFFLOAD | IPS_HW_OFFLOAD),
 
-	__IPS_MAX_BIT = 15,
+	__IPS_MAX_BIT = 16,
 };
 
 /* Connection tracking event types */
diff --git a/include/uapi/linux/netfilter/nf_nat.h b/include/uapi/linux/netfilter/nf_nat.h
index 4a95c0db14d4..a64586e77b24 100644
--- a/include/uapi/linux/netfilter/nf_nat.h
+++ b/include/uapi/linux/netfilter/nf_nat.h
@@ -11,6 +11,7 @@
 #define NF_NAT_RANGE_PERSISTENT			(1 << 3)
 #define NF_NAT_RANGE_PROTO_RANDOM_FULLY		(1 << 4)
 #define NF_NAT_RANGE_PROTO_OFFSET		(1 << 5)
+#define NF_NAT_RANGE_NETMAP			(1 << 6)
 
 #define NF_NAT_RANGE_PROTO_RANDOM_ALL		\
 	(NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PROTO_RANDOM_FULLY)
@@ -18,7 +19,8 @@
 #define NF_NAT_RANGE_MASK					\
 	(NF_NAT_RANGE_MAP_IPS | NF_NAT_RANGE_PROTO_SPECIFIED |	\
 	 NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PERSISTENT |	\
-	 NF_NAT_RANGE_PROTO_RANDOM_FULLY | NF_NAT_RANGE_PROTO_OFFSET)
+	 NF_NAT_RANGE_PROTO_RANDOM_FULLY | NF_NAT_RANGE_PROTO_OFFSET | \
+	 NF_NAT_RANGE_NETMAP)
 
 struct nf_nat_ipv4_range {
 	unsigned int			flags;
diff --git a/include/uapi/linux/netfilter_bridge/ebt_among.h b/include/uapi/linux/netfilter_bridge/ebt_among.h
index 73b26a280c4f..9acf757bc1f7 100644
--- a/include/uapi/linux/netfilter_bridge/ebt_among.h
+++ b/include/uapi/linux/netfilter_bridge/ebt_among.h
@@ -40,7 +40,7 @@ struct ebt_mac_wormhash_tuple {
 struct ebt_mac_wormhash {
 	int table[257];
 	int poolsize;
-	struct ebt_mac_wormhash_tuple pool[];
+	struct ebt_mac_wormhash_tuple pool[0];
 };
 
 #define ebt_mac_wormhash_size(x) ((x) ? sizeof(struct ebt_mac_wormhash) \
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 2b691161830f..9679d561f7d0 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -687,6 +687,10 @@
  *	four bytes for vendor frames including the OUI. The registration
  *	cannot be dropped, but is removed automatically when the netlink
  *	socket is closed. Multiple registrations can be made.
+ *	The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
+ *	%NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which
+ *	case the registration can also be modified to include/exclude the
+ *	flag, rather than requiring unregistration to change it.
  * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
  *	backward compatibility
  * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
@@ -1151,6 +1155,11 @@
  * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
  *	is passed using %NL80211_ATTR_TID_CONFIG attribute.
  *
+ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon
+ *	frame. This event is used to indicate that a received Beacon frame was
+ *	dropped because it did not include a valid MME MIC while beacon
+ *	protection was enabled (BIGTK configured in station mode).
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1377,6 +1386,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_TID_CONFIG,
 
+	NL80211_CMD_UNPROT_BEACON,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2470,6 +2481,9 @@ enum nl80211_commands {
  *	no roaming occurs between the reauth threshold and PMK expiration,
  *	disassociation is still forced.
  *
+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
+ *	%NL80211_CMD_REGISTER_FRAME command, see the description there.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2945,6 +2959,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_PMK_LIFETIME,
 	NL80211_ATTR_PMK_REAUTH_THRESHOLD,
 
+	NL80211_ATTR_RECEIVE_MULTICAST,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -5674,6 +5690,8 @@ enum nl80211_feature_flags {
  *
  * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
  *	and can receive key configuration for BIGTK using key indexes 6 and 7.
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
+ *	protection as a client only and cannot transmit protected beacons.
  *
  * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
  *	forwarding of preauth frames over the control port. They are then
@@ -5684,6 +5702,9 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
  *      in IBSS mode, essentially by dropping their state.
  *
+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
+ *	are possible for multicast frames and those will be reported properly.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5735,6 +5756,8 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
 	NL80211_EXT_FEATURE_PROTECTED_TWT,
 	NL80211_EXT_FEATURE_DEL_IBSS_STA,
+	NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
+	NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 1a58d7cc4ccc..0ba1005c9651 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -473,6 +473,10 @@ enum v4l2_mpeg_video_h264_level {
 	V4L2_MPEG_VIDEO_H264_LEVEL_4_2	= 13,
 	V4L2_MPEG_VIDEO_H264_LEVEL_5_0	= 14,
 	V4L2_MPEG_VIDEO_H264_LEVEL_5_1	= 15,
+	V4L2_MPEG_VIDEO_H264_LEVEL_5_2	= 16,
+	V4L2_MPEG_VIDEO_H264_LEVEL_6_0	= 17,
+	V4L2_MPEG_VIDEO_H264_LEVEL_6_1	= 18,
+	V4L2_MPEG_VIDEO_H264_LEVEL_6_2	= 19,
 };
 #define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA	(V4L2_CID_MPEG_BASE+360)
 #define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA	(V4L2_CID_MPEG_BASE+361)
@@ -501,6 +505,7 @@ enum v4l2_mpeg_video_h264_profile {
 	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA	= 14,
 	V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH		= 15,
 	V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH		= 16,
+	V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH		= 17,
 };
 #define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT	(V4L2_CID_MPEG_BASE+364)
 #define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH	(V4L2_CID_MPEG_BASE+365)
diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h
index 559f42e73315..476d3e5c0fe7 100644
--- a/include/uapi/linux/virtio_ring.h
+++ b/include/uapi/linux/virtio_ring.h
@@ -86,6 +86,13 @@
  * at the end of the used ring. Guest should ignore the used->flags field. */
 #define VIRTIO_RING_F_EVENT_IDX		29
 
+/* Alignment requirements for vring elements.
+ * When using pre-virtio 1.0 layout, these fall out naturally.
+ */
+#define VRING_AVAIL_ALIGN_SIZE 2
+#define VRING_USED_ALIGN_SIZE 4
+#define VRING_DESC_ALIGN_SIZE 16
+
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
 struct vring_desc {
 	/* Address (guest-physical). */
@@ -112,28 +119,47 @@ struct vring_used_elem {
 	__virtio32 len;
 };
 
+typedef struct vring_used_elem __attribute__((aligned(VRING_USED_ALIGN_SIZE)))
+	vring_used_elem_t;
+
 struct vring_used {
 	__virtio16 flags;
 	__virtio16 idx;
-	struct vring_used_elem ring[];
+	vring_used_elem_t ring[];
 };
 
+/*
+ * The ring element addresses are passed between components with different
+ * alignments assumptions. Thus, we might need to decrease the compiler-selected
+ * alignment, and so must use a typedef to make sure the aligned attribute
+ * actually takes hold:
+ *
+ * https://gcc.gnu.org/onlinedocs//gcc/Common-Type-Attributes.html#Common-Type-Attributes
+ *
+ * When used on a struct, or struct member, the aligned attribute can only
+ * increase the alignment; in order to decrease it, the packed attribute must
+ * be specified as well. When used as part of a typedef, the aligned attribute
+ * can both increase and decrease alignment, and specifying the packed
+ * attribute generates a warning.
+ */
+typedef struct vring_desc __attribute__((aligned(VRING_DESC_ALIGN_SIZE)))
+	vring_desc_t;
+typedef struct vring_avail __attribute__((aligned(VRING_AVAIL_ALIGN_SIZE)))
+	vring_avail_t;
+typedef struct vring_used __attribute__((aligned(VRING_USED_ALIGN_SIZE)))
+	vring_used_t;
+
 struct vring {
 	unsigned int num;
 
-	struct vring_desc *desc;
+	vring_desc_t *desc;
 
-	struct vring_avail *avail;
+	vring_avail_t *avail;
 
-	struct vring_used *used;
+	vring_used_t *used;
 };
 
-/* Alignment requirements for vring elements.
- * When using pre-virtio 1.0 layout, these fall out naturally.
- */
-#define VRING_AVAIL_ALIGN_SIZE 2
-#define VRING_USED_ALIGN_SIZE 4
-#define VRING_DESC_ALIGN_SIZE 16
+#ifndef VIRTIO_RING_NO_LEGACY
 
 /* The standard layout for the ring is a continuous chunk of memory which looks
  * like this.  We assume num is a power of 2.
@@ -181,6 +207,8 @@ static inline unsigned vring_size(unsigned int num, unsigned long align)
 		+ sizeof(__virtio16) * 3 + sizeof(struct vring_used_elem) * num;
 }
 
+#endif /* VIRTIO_RING_NO_LEGACY */
+
 /* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
 /* Assuming a given event_idx value from the other side, if
  * we have just incremented index from old to new_idx,
diff --git a/include/uapi/linux/watch_queue.h b/include/uapi/linux/watch_queue.h
new file mode 100644
index 000000000000..c3d8320b5d3a
--- /dev/null
+++ b/include/uapi/linux/watch_queue.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_WATCH_QUEUE_H
+#define _UAPI_LINUX_WATCH_QUEUE_H
+
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/ioctl.h>
+
+#define O_NOTIFICATION_PIPE	O_EXCL	/* Parameter to pipe2() selecting notification pipe */
+
+#define IOC_WATCH_QUEUE_SET_SIZE	_IO('W', 0x60)	/* Set the size in pages */
+#define IOC_WATCH_QUEUE_SET_FILTER	_IO('W', 0x61)	/* Set the filter */
+
+enum watch_notification_type {
+	WATCH_TYPE_META		= 0,	/* Special record */
+	WATCH_TYPE_KEY_NOTIFY	= 1,	/* Key change event notification */
+	WATCH_TYPE__NR		= 2
+};
+
+enum watch_meta_notification_subtype {
+	WATCH_META_REMOVAL_NOTIFICATION	= 0,	/* Watched object was removed */
+	WATCH_META_LOSS_NOTIFICATION	= 1,	/* Data loss occurred */
+};
+
+/*
+ * Notification record header.  This is aligned to 64-bits so that subclasses
+ * can contain __u64 fields.
+ */
+struct watch_notification {
+	__u32			type:24;	/* enum watch_notification_type */
+	__u32			subtype:8;	/* Type-specific subtype (filterable) */
+	__u32			info;
+#define WATCH_INFO_LENGTH	0x0000007f	/* Length of record */
+#define WATCH_INFO_LENGTH__SHIFT 0
+#define WATCH_INFO_ID		0x0000ff00	/* ID of watchpoint */
+#define WATCH_INFO_ID__SHIFT	8
+#define WATCH_INFO_TYPE_INFO	0xffff0000	/* Type-specific info */
+#define WATCH_INFO_TYPE_INFO__SHIFT 16
+#define WATCH_INFO_FLAG_0	0x00010000	/* Type-specific info, flag bit 0 */
+#define WATCH_INFO_FLAG_1	0x00020000	/* ... */
+#define WATCH_INFO_FLAG_2	0x00040000
+#define WATCH_INFO_FLAG_3	0x00080000
+#define WATCH_INFO_FLAG_4	0x00100000
+#define WATCH_INFO_FLAG_5	0x00200000
+#define WATCH_INFO_FLAG_6	0x00400000
+#define WATCH_INFO_FLAG_7	0x00800000
+};
+
+/*
+ * Notification filtering rules (IOC_WATCH_QUEUE_SET_FILTER).
+ */
+struct watch_notification_type_filter {
+	__u32	type;			/* Type to apply filter to */
+	__u32	info_filter;		/* Filter on watch_notification::info */
+	__u32	info_mask;		/* Mask of relevant bits in info_filter */
+	__u32	subtype_filter[8];	/* Bitmask of subtypes to filter on */
+};
+
+struct watch_notification_filter {
+	__u32	nr_filters;		/* Number of filters */
+	__u32	__reserved;		/* Must be 0 */
+	struct watch_notification_type_filter filters[];
+};
+
+
+/*
+ * Extended watch removal notification.  This is used optionally if the type
+ * wants to indicate an identifier for the object being watched, if there is
+ * such.  This can be distinguished by the length.
+ *
+ * type -> WATCH_TYPE_META
+ * subtype -> WATCH_META_REMOVAL_NOTIFICATION
+ */
+struct watch_notification_removal {
+	struct watch_notification watch;
+	__u64	id;		/* Type-dependent identifier */
+};
+
+/*
+ * Type of key/keyring change notification.
+ */
+enum key_notification_subtype {
+	NOTIFY_KEY_INSTANTIATED	= 0, /* Key was instantiated (aux is error code) */
+	NOTIFY_KEY_UPDATED	= 1, /* Key was updated */
+	NOTIFY_KEY_LINKED	= 2, /* Key (aux) was added to watched keyring */
+	NOTIFY_KEY_UNLINKED	= 3, /* Key (aux) was removed from watched keyring */
+	NOTIFY_KEY_CLEARED	= 4, /* Keyring was cleared */
+	NOTIFY_KEY_REVOKED	= 5, /* Key was revoked */
+	NOTIFY_KEY_INVALIDATED	= 6, /* Key was invalidated */
+	NOTIFY_KEY_SETATTR	= 7, /* Key's attributes got changed */
+};
+
+/*
+ * Key/keyring notification record.
+ * - watch.type = WATCH_TYPE_KEY_NOTIFY
+ * - watch.subtype = enum key_notification_type
+ */
+struct key_notification {
+	struct watch_notification watch;
+	__u32	key_id;		/* The key/keyring affected */
+	__u32	aux;		/* Per-type auxiliary data */
+};
+
+#endif /* _UAPI_LINUX_WATCH_QUEUE_H */
diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h
index 5f3b9fec7b5f..ff7cfdc6cb44 100644
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -304,7 +304,7 @@ enum xfrm_attr_type_t {
 	XFRMA_PROTO,		/* __u8 */
 	XFRMA_ADDRESS_FILTER,	/* struct xfrm_address_filter */
 	XFRMA_PAD,
-	XFRMA_OFFLOAD_DEV,	/* struct xfrm_state_offload */
+	XFRMA_OFFLOAD_DEV,	/* struct xfrm_user_offload */
 	XFRMA_SET_MARK,		/* __u32 */
 	XFRMA_SET_MARK_MASK,	/* __u32 */
 	XFRMA_IF_ID,		/* __u32 */
diff --git a/include/uapi/rdma/rdma_user_ioctl_cmds.h b/include/uapi/rdma/rdma_user_ioctl_cmds.h
index 7b1ec806f8f9..38ab7accb7be 100644
--- a/include/uapi/rdma/rdma_user_ioctl_cmds.h
+++ b/include/uapi/rdma/rdma_user_ioctl_cmds.h
@@ -36,7 +36,7 @@
 #include <linux/types.h>
 #include <linux/ioctl.h>
 
-/* Documentation/ioctl/ioctl-number.rst */
+/* Documentation/userspace-api/ioctl/ioctl-number.rst */
 #define RDMA_IOCTL_MAGIC	0x1b
 #define RDMA_VERBS_IOCTL \
 	_IOWR(RDMA_IOCTL_MAGIC, 1, struct ib_uverbs_ioctl_hdr)
diff --git a/include/uapi/scsi/scsi_bsg_fc.h b/include/uapi/scsi/scsi_bsg_fc.h
index 7f5930801f72..3ae65e93235c 100644
--- a/include/uapi/scsi/scsi_bsg_fc.h
+++ b/include/uapi/scsi/scsi_bsg_fc.h
@@ -209,7 +209,7 @@ struct fc_bsg_host_vendor {
 	__u64 vendor_id;
 
 	/* start of vendor command area */
-	__u32 vendor_cmd[];
+	__u32 vendor_cmd[0];
 };
 
 /* Response:
diff --git a/include/uapi/sound/skl-tplg-interface.h b/include/uapi/sound/skl-tplg-interface.h
index 9eee32f5e407..a93c0decfdd5 100644
--- a/include/uapi/sound/skl-tplg-interface.h
+++ b/include/uapi/sound/skl-tplg-interface.h
@@ -18,6 +18,8 @@
  */
 #define SKL_CONTROL_TYPE_BYTE_TLV	0x100
 #define SKL_CONTROL_TYPE_MIC_SELECT	0x102
+#define SKL_CONTROL_TYPE_MULTI_IO_SELECT	0x103
+#define SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC	0x104
 
 #define HDA_SST_CFG_MAX	900 /* size of copier cfg*/
 #define MAX_IN_QUEUE 8
diff --git a/include/uapi/sound/sof/abi.h b/include/uapi/sound/sof/abi.h
index 5995b79d6df1..d54be303090f 100644
--- a/include/uapi/sound/sof/abi.h
+++ b/include/uapi/sound/sof/abi.h
@@ -26,7 +26,7 @@
 
 /* SOF ABI version major, minor and patch numbers */
 #define SOF_ABI_MAJOR 3
-#define SOF_ABI_MINOR 13
+#define SOF_ABI_MINOR 16
 #define SOF_ABI_PATCH 0
 
 /* SOF ABI version number. Format within 32bit word is MMmmmppp */
diff --git a/include/uapi/sound/sof/tokens.h b/include/uapi/sound/sof/tokens.h
index 2a25cd8da503..5941e2eb1588 100644
--- a/include/uapi/sound/sof/tokens.h
+++ b/include/uapi/sound/sof/tokens.h
@@ -126,4 +126,12 @@
 #define SOF_TKN_MUTE_LED_USE			1300
 #define SOF_TKN_MUTE_LED_DIRECTION		1301
 
+/* ALH */
+#define SOF_TKN_INTEL_ALH_RATE			1400
+#define SOF_TKN_INTEL_ALH_CH			1401
+
+/* HDA */
+#define SOF_TKN_INTEL_HDA_RATE			1500
+#define SOF_TKN_INTEL_HDA_CH			1501
+
 #endif
diff --git a/init/Kconfig b/init/Kconfig
index 9e22ee8fbd75..492bb7000aa4 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -342,6 +342,18 @@ config POSIX_MQUEUE_SYSCTL
 	depends on SYSCTL
 	default y
 
+config WATCH_QUEUE
+	bool "General notification queue"
+	default n
+	help
+
+	  This is a general notification queue for the kernel to pass events to
+	  userspace by splicing them into pipes.  It can be used in conjunction
+	  with watches for key/keyring change notifications and device
+	  notifications.
+
+	  See Documentation/watch_queue.rst
+
 config CROSS_MEMORY_ATTACH
 	bool "Enable process_vm_readv/writev syscalls"
 	depends on MMU
diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c
index dab8b1151b56..d72beda824aa 100644
--- a/init/do_mounts_initrd.c
+++ b/init/do_mounts_initrd.c
@@ -28,7 +28,7 @@ static int __init no_initrd(char *str)
 
 __setup("noinitrd", no_initrd);
 
-static int __init early_initrd(char *p)
+static int __init early_initrdmem(char *p)
 {
 	phys_addr_t start;
 	unsigned long size;
@@ -43,6 +43,17 @@ static int __init early_initrd(char *p)
 	}
 	return 0;
 }
+early_param("initrdmem", early_initrdmem);
+
+/*
+ * This is here as the initrd keyword has been in use since 11/2018
+ * on ARM, PowerPC, and MIPS.
+ * It should not be; it is reserved for bootloaders.
+ */
+static int __init early_initrd(char *p)
+{
+	return early_initrdmem(p);
+}
 early_param("initrd", early_initrd);
 
 static int init_linuxrc(struct subprocess_info *info, struct cred *new)
diff --git a/init/init_task.c b/init/init_task.c
index bd403ed3e418..537c70cc0d0f 100644
--- a/init/init_task.c
+++ b/init/init_task.c
@@ -141,6 +141,11 @@ struct task_struct init_task
 	.rcu_tasks_holdout_list = LIST_HEAD_INIT(init_task.rcu_tasks_holdout_list),
 	.rcu_tasks_idle_cpu = -1,
 #endif
+#ifdef CONFIG_TASKS_TRACE_RCU
+	.trc_reader_nesting = 0,
+	.trc_reader_special.s = 0,
+	.trc_holdout_list = LIST_HEAD_INIT(init_task.trc_holdout_list),
+#endif
 #ifdef CONFIG_CPUSETS
 	.mems_allowed_seq = SEQCNT_ZERO(init_task.mems_allowed_seq),
 #endif
@@ -162,6 +167,16 @@ struct task_struct init_task
 #ifdef CONFIG_KASAN
 	.kasan_depth	= 1,
 #endif
+#ifdef CONFIG_KCSAN
+	.kcsan_ctx = {
+		.disable_count		= 0,
+		.atomic_next		= 0,
+		.atomic_nest_count	= 0,
+		.in_flat_atomic		= false,
+		.access_mask		= 0,
+		.scoped_accesses	= {LIST_POISON1, NULL},
+	},
+#endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	.softirqs_enabled = 1,
 #endif
diff --git a/init/initramfs.c b/init/initramfs.c
index 8ec1be4d7d51..bda77a6c8e50 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -542,7 +542,7 @@ void __weak free_initrd_mem(unsigned long start, unsigned long end)
 }
 
 #ifdef CONFIG_KEXEC_CORE
-static bool kexec_free_initrd(void)
+static bool __init kexec_free_initrd(void)
 {
 	unsigned long crashk_start = (unsigned long)__va(crashk_res.start);
 	unsigned long crashk_end   = (unsigned long)__va(crashk_res.end);
@@ -565,7 +565,7 @@ static bool kexec_free_initrd(void)
 	return true;
 }
 #else
-static inline bool kexec_free_initrd(void)
+static inline bool __init kexec_free_initrd(void)
 {
 	return false;
 }
diff --git a/init/main.c b/init/main.c
index a48617f2e5e5..6e4984316d23 100644
--- a/init/main.c
+++ b/init/main.c
@@ -94,6 +94,7 @@
 #include <linux/rodata_test.h>
 #include <linux/jump_label.h>
 #include <linux/mem_encrypt.h>
+#include <linux/kcsan.h>
 
 #include <asm/io.h>
 #include <asm/bugs.h>
@@ -998,6 +999,7 @@ asmlinkage __visible void __init start_kernel(void)
 	acpi_subsystem_init();
 	arch_post_acpi_subsys_init();
 	sfi_init_late();
+	kcsan_init();
 
 	/* Do the rest non-__init'ed, we're now alive */
 	arch_call_rest_init();
@@ -1372,6 +1374,8 @@ static int __ref kernel_init(void *unused)
 
 	rcu_end_inkernel_boot();
 
+	do_sysctl_args();
+
 	if (ramdisk_execute_command) {
 		ret = run_init_process(ramdisk_execute_command);
 		if (!ret)
diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
index affd66537e87..4aeb5375fa8b 100644
--- a/ipc/ipc_sysctl.c
+++ b/ipc/ipc_sysctl.c
@@ -24,7 +24,7 @@ static void *get_ipc(struct ctl_table *table)
 
 #ifdef CONFIG_PROC_SYSCTL
 static int proc_ipc_dointvec(struct ctl_table *table, int write,
-	void __user *buffer, size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table ipc_table;
 
@@ -35,7 +35,7 @@ static int proc_ipc_dointvec(struct ctl_table *table, int write,
 }
 
 static int proc_ipc_dointvec_minmax(struct ctl_table *table, int write,
-	void __user *buffer, size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table ipc_table;
 
@@ -46,7 +46,7 @@ static int proc_ipc_dointvec_minmax(struct ctl_table *table, int write,
 }
 
 static int proc_ipc_dointvec_minmax_orphans(struct ctl_table *table, int write,
-	void __user *buffer, size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ipc_namespace *ns = current->nsproxy->ipc_ns;
 	int err = proc_ipc_dointvec_minmax(table, write, buffer, lenp, ppos);
@@ -59,7 +59,7 @@ static int proc_ipc_dointvec_minmax_orphans(struct ctl_table *table, int write,
 }
 
 static int proc_ipc_doulongvec_minmax(struct ctl_table *table, int write,
-	void __user *buffer, size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table ipc_table;
 	memcpy(&ipc_table, table, sizeof(ipc_table));
@@ -70,7 +70,7 @@ static int proc_ipc_doulongvec_minmax(struct ctl_table *table, int write,
 }
 
 static int proc_ipc_auto_msgmni(struct ctl_table *table, int write,
-	void __user *buffer, size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table ipc_table;
 	int dummy = 0;
@@ -115,7 +115,7 @@ static int proc_ipc_sem_dointvec(struct ctl_table *table, int write,
 
 int ipc_mni = IPCMNI;
 int ipc_mni_shift = IPCMNI_SHIFT;
-int ipc_min_cycle = RADIX_TREE_MAP_SIZE;
+int ipc_min_cycle = XA_CHUNK_SIZE;
 
 static struct ctl_table ipc_kern_table[] = {
 	{
@@ -196,8 +196,8 @@ static struct ctl_table ipc_kern_table[] = {
 #ifdef CONFIG_CHECKPOINT_RESTORE
 	{
 		.procname	= "sem_next_id",
-		.data		= &init_ipc_ns.ids[IPC_SEM_IDS].next_id,
-		.maxlen		= sizeof(init_ipc_ns.ids[IPC_SEM_IDS].next_id),
+		.data		= &init_ipc_ns.ids[IPC_SEM_IDS].restore_id,
+		.maxlen		= sizeof(init_ipc_ns.ids[IPC_SEM_IDS].restore_id),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_dointvec_minmax,
 		.extra1		= SYSCTL_ZERO,
@@ -205,8 +205,8 @@ static struct ctl_table ipc_kern_table[] = {
 	},
 	{
 		.procname	= "msg_next_id",
-		.data		= &init_ipc_ns.ids[IPC_MSG_IDS].next_id,
-		.maxlen		= sizeof(init_ipc_ns.ids[IPC_MSG_IDS].next_id),
+		.data		= &init_ipc_ns.ids[IPC_MSG_IDS].restore_id,
+		.maxlen		= sizeof(init_ipc_ns.ids[IPC_MSG_IDS].restore_id),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_dointvec_minmax,
 		.extra1		= SYSCTL_ZERO,
@@ -214,8 +214,8 @@ static struct ctl_table ipc_kern_table[] = {
 	},
 	{
 		.procname	= "shm_next_id",
-		.data		= &init_ipc_ns.ids[IPC_SHM_IDS].next_id,
-		.maxlen		= sizeof(init_ipc_ns.ids[IPC_SHM_IDS].next_id),
+		.data		= &init_ipc_ns.ids[IPC_SHM_IDS].restore_id,
+		.maxlen		= sizeof(init_ipc_ns.ids[IPC_SHM_IDS].restore_id),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_dointvec_minmax,
 		.extra1		= SYSCTL_ZERO,
diff --git a/ipc/mq_sysctl.c b/ipc/mq_sysctl.c
index 7c00f28923a8..72a92a08c848 100644
--- a/ipc/mq_sysctl.c
+++ b/ipc/mq_sysctl.c
@@ -19,7 +19,7 @@ static void *get_mq(struct ctl_table *table)
 }
 
 static int proc_mq_dointvec(struct ctl_table *table, int write,
-			    void __user *buffer, size_t *lenp, loff_t *ppos)
+			    void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table mq_table;
 	memcpy(&mq_table, table, sizeof(mq_table));
@@ -29,7 +29,7 @@ static int proc_mq_dointvec(struct ctl_table *table, int write,
 }
 
 static int proc_mq_dointvec_minmax(struct ctl_table *table, int write,
-	void __user *buffer, size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table mq_table;
 	memcpy(&mq_table, table, sizeof(mq_table));
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index dc8307bf2d74..beff0cfcd1e8 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -142,6 +142,7 @@ struct mqueue_inode_info {
 
 	struct sigevent notify;
 	struct pid *notify_owner;
+	u32 notify_self_exec_id;
 	struct user_namespace *notify_user_ns;
 	struct user_struct *user;	/* user who created, for accounting */
 	struct sock *notify_sock;
@@ -773,28 +774,44 @@ static void __do_notify(struct mqueue_inode_info *info)
 	 * synchronously. */
 	if (info->notify_owner &&
 	    info->attr.mq_curmsgs == 1) {
-		struct kernel_siginfo sig_i;
 		switch (info->notify.sigev_notify) {
 		case SIGEV_NONE:
 			break;
-		case SIGEV_SIGNAL:
-			/* sends signal */
+		case SIGEV_SIGNAL: {
+			struct kernel_siginfo sig_i;
+			struct task_struct *task;
+
+			/* do_mq_notify() accepts sigev_signo == 0, why?? */
+			if (!info->notify.sigev_signo)
+				break;
 
 			clear_siginfo(&sig_i);
 			sig_i.si_signo = info->notify.sigev_signo;
 			sig_i.si_errno = 0;
 			sig_i.si_code = SI_MESGQ;
 			sig_i.si_value = info->notify.sigev_value;
-			/* map current pid/uid into info->owner's namespaces */
 			rcu_read_lock();
+			/* map current pid/uid into info->owner's namespaces */
 			sig_i.si_pid = task_tgid_nr_ns(current,
 						ns_of_pid(info->notify_owner));
-			sig_i.si_uid = from_kuid_munged(info->notify_user_ns, current_uid());
+			sig_i.si_uid = from_kuid_munged(info->notify_user_ns,
+						current_uid());
+			/*
+			 * We can't use kill_pid_info(), this signal should
+			 * bypass check_kill_permission(). It is from kernel
+			 * but si_fromuser() can't know this.
+			 * We do check the self_exec_id, to avoid sending
+			 * signals to programs that don't expect them.
+			 */
+			task = pid_task(info->notify_owner, PIDTYPE_TGID);
+			if (task && task->self_exec_id ==
+						info->notify_self_exec_id) {
+				do_send_sig_info(info->notify.sigev_signo,
+						&sig_i, task, PIDTYPE_TGID);
+			}
 			rcu_read_unlock();
-
-			kill_pid_info(info->notify.sigev_signo,
-				      &sig_i, info->notify_owner);
 			break;
+		}
 		case SIGEV_THREAD:
 			set_cookie(info->notify_cookie, NOTIFY_WOKENUP);
 			netlink_sendskb(info->notify_sock, info->notify_cookie);
@@ -1383,6 +1400,7 @@ static int do_mq_notify(mqd_t mqdes, const struct sigevent *notification)
 			info->notify.sigev_signo = notification->sigev_signo;
 			info->notify.sigev_value = notification->sigev_value;
 			info->notify.sigev_notify = SIGEV_SIGNAL;
+			info->notify_self_exec_id = current->self_exec_id;
 			break;
 		}
 
diff --git a/ipc/msg.c b/ipc/msg.c
index caca67368cb5..b8f7b18cd778 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -268,6 +268,8 @@ static void expunge_all(struct msg_queue *msq, int res,
  * before freeque() is called. msg_ids.rwsem remains locked on exit.
  */
 static void freeque(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
+	__releases(RCU)
+	__releases(&msq->q_perm)
 {
 	struct msg_msg *msg, *t;
 	struct msg_queue *msq = container_of(ipcp, struct msg_queue, q_perm);
@@ -1308,7 +1310,6 @@ void msg_init_ns(struct ipc_namespace *ns)
 void msg_exit_ns(struct ipc_namespace *ns)
 {
 	free_ipcs(ns, &msg_ids(ns), freeque);
-	idr_destroy(&ns->ids[IPC_MSG_IDS].ipcs_idr);
 	rhashtable_destroy(&ns->ids[IPC_MSG_IDS].key_ht);
 }
 #endif
diff --git a/ipc/namespace.c b/ipc/namespace.c
index b3ca1476ca51..e3718a7efed6 100644
--- a/ipc/namespace.c
+++ b/ipc/namespace.c
@@ -96,27 +96,26 @@ void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids,
 	       void (*free)(struct ipc_namespace *, struct kern_ipc_perm *))
 {
 	struct kern_ipc_perm *perm;
-	int next_id;
-	int total, in_use;
+	unsigned long index;
 
 	down_write(&ids->rwsem);
 
-	in_use = ids->in_use;
-
-	for (total = 0, next_id = 0; total < in_use; next_id++) {
-		perm = idr_find(&ids->ipcs_idr, next_id);
-		if (perm == NULL)
-			continue;
+	xa_for_each(&ids->ipcs, index, perm) {
 		rcu_read_lock();
 		ipc_lock_object(perm);
 		free(ns, perm);
-		total++;
 	}
+	BUG_ON(!xa_empty(&ids->ipcs));
+
 	up_write(&ids->rwsem);
 }
 
 static void free_ipc_ns(struct ipc_namespace *ns)
 {
+	/* mq_put_mnt() waits for a grace period as kern_unmount()
+	 * uses synchronize_rcu().
+	 */
+	mq_put_mnt(ns);
 	sem_exit_ns(ns);
 	msg_exit_ns(ns);
 	shm_exit_ns(ns);
@@ -127,6 +126,21 @@ static void free_ipc_ns(struct ipc_namespace *ns)
 	kfree(ns);
 }
 
+static LLIST_HEAD(free_ipc_list);
+static void free_ipc(struct work_struct *unused)
+{
+	struct llist_node *node = llist_del_all(&free_ipc_list);
+	struct ipc_namespace *n, *t;
+
+	llist_for_each_entry_safe(n, t, node, mnt_llist)
+		free_ipc_ns(n);
+}
+
+/*
+ * The work queue is used to avoid the cost of synchronize_rcu in kern_unmount.
+ */
+static DECLARE_WORK(free_ipc_work, free_ipc);
+
 /*
  * put_ipc_ns - drop a reference to an ipc namespace.
  * @ns: the namespace to put
@@ -148,8 +162,9 @@ void put_ipc_ns(struct ipc_namespace *ns)
 	if (refcount_dec_and_lock(&ns->count, &mq_lock)) {
 		mq_clear_sbinfo(ns);
 		spin_unlock(&mq_lock);
-		mq_put_mnt(ns);
-		free_ipc_ns(ns);
+
+		if (llist_add(&ns->mnt_llist, &free_ipc_list))
+			schedule_work(&free_ipc_work);
 	}
 }
 
diff --git a/ipc/sem.c b/ipc/sem.c
index 3687b71151b3..8d6550ac035a 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -258,7 +258,6 @@ void sem_init_ns(struct ipc_namespace *ns)
 void sem_exit_ns(struct ipc_namespace *ns)
 {
 	free_ipcs(ns, &sem_ids(ns), freeary);
-	idr_destroy(&ns->ids[IPC_SEM_IDS].ipcs_idr);
 	rhashtable_destroy(&ns->ids[IPC_SEM_IDS].key_ht);
 }
 #endif
diff --git a/ipc/shm.c b/ipc/shm.c
index 0ba6add05b35..7922c4f65234 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -129,7 +129,6 @@ static void do_shm_rmid(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
 void shm_exit_ns(struct ipc_namespace *ns)
 {
 	free_ipcs(ns, &shm_ids(ns), do_shm_rmid);
-	idr_destroy(&ns->ids[IPC_SHM_IDS].ipcs_idr);
 	rhashtable_destroy(&ns->ids[IPC_SHM_IDS].key_ht);
 }
 #endif
@@ -348,34 +347,30 @@ static void shm_close(struct vm_area_struct *vma)
 	up_write(&shm_ids(ns).rwsem);
 }
 
-/* Called with ns->shm_ids(ns).rwsem locked */
-static int shm_try_destroy_orphaned(int id, void *p, void *data)
+void shm_destroy_orphaned(struct ipc_namespace *ns)
 {
-	struct ipc_namespace *ns = data;
-	struct kern_ipc_perm *ipcp = p;
-	struct shmid_kernel *shp = container_of(ipcp, struct shmid_kernel, shm_perm);
+	struct kern_ipc_perm *ipcp;
+	unsigned long index;
 
-	/*
-	 * We want to destroy segments without users and with already
-	 * exit'ed originating process.
-	 *
-	 * As shp->* are changed under rwsem, it's safe to skip shp locking.
-	 */
-	if (shp->shm_creator != NULL)
-		return 0;
+	down_write(&shm_ids(ns).rwsem);
+	xa_for_each(&shm_ids(ns).ipcs, index, ipcp) {
+		struct shmid_kernel *shp;
 
-	if (shm_may_destroy(ns, shp)) {
-		shm_lock_by_ptr(shp);
-		shm_destroy(ns, shp);
-	}
-	return 0;
-}
+		shp = container_of(ipcp, struct shmid_kernel, shm_perm);
 
-void shm_destroy_orphaned(struct ipc_namespace *ns)
-{
-	down_write(&shm_ids(ns).rwsem);
-	if (shm_ids(ns).in_use)
-		idr_for_each(&shm_ids(ns).ipcs_idr, &shm_try_destroy_orphaned, ns);
+		/*
+		 * We want to destroy segments without users and with already
+		 * exit'ed originating process.  As shp->* are changed under
+		 * rwsem, it's safe to skip shp locking.
+		 */
+		if (shp->shm_creator != NULL)
+			continue;
+
+		if (shm_may_destroy(ns, shp)) {
+			shm_lock_by_ptr(shp);
+			shm_destroy(ns, shp);
+		}
+	}
 	up_write(&shm_ids(ns).rwsem);
 }
 
@@ -860,26 +855,17 @@ static void shm_add_rss_swap(struct shmid_kernel *shp,
 static void shm_get_stat(struct ipc_namespace *ns, unsigned long *rss,
 		unsigned long *swp)
 {
-	int next_id;
-	int total, in_use;
+	struct kern_ipc_perm *ipc;
+	unsigned long index;
 
 	*rss = 0;
 	*swp = 0;
 
-	in_use = shm_ids(ns).in_use;
-
-	for (total = 0, next_id = 0; total < in_use; next_id++) {
-		struct kern_ipc_perm *ipc;
+	xa_for_each(&shm_ids(ns).ipcs, index, ipc) {
 		struct shmid_kernel *shp;
 
-		ipc = idr_find(&shm_ids(ns).ipcs_idr, next_id);
-		if (ipc == NULL)
-			continue;
 		shp = container_of(ipc, struct shmid_kernel, shm_perm);
-
 		shm_add_rss_swap(shp, rss, swp);
-
-		total++;
 	}
 }
 
diff --git a/ipc/util.c b/ipc/util.c
index 7acccfded7cb..0f6b0e0aa17e 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -104,12 +104,20 @@ static const struct rhashtable_params ipc_kht_params = {
 	.automatic_shrinking	= true,
 };
 
+#ifdef CONFIG_CHECKPOINT_RESTORE
+#define set_restore_id(ids, x)	ids->restore_id = x
+#define get_restore_id(ids)	ids->restore_id
+#else
+#define set_restore_id(ids, x)	do { } while (0)
+#define get_restore_id(ids)	(-1)
+#endif
+
 /**
  * ipc_init_ids	- initialise ipc identifiers
  * @ids: ipc identifier set
  *
  * Set up the sequence range to use for the ipc identifier range (limited
- * below ipc_mni) then initialise the keys hashtable and ids idr.
+ * below ipc_mni) then initialise the keys hashtable and ids xarray.
  */
 void ipc_init_ids(struct ipc_ids *ids)
 {
@@ -117,12 +125,10 @@ void ipc_init_ids(struct ipc_ids *ids)
 	ids->seq = 0;
 	init_rwsem(&ids->rwsem);
 	rhashtable_init(&ids->key_ht, &ipc_kht_params);
-	idr_init(&ids->ipcs_idr);
+	xa_init_flags(&ids->ipcs, XA_FLAGS_ALLOC);
 	ids->max_idx = -1;
-	ids->last_idx = -1;
-#ifdef CONFIG_CHECKPOINT_RESTORE
-	ids->next_id = -1;
-#endif
+	ids->next_idx = 0;
+	set_restore_id(ids, -1);
 }
 
 #ifdef CONFIG_PROC_FS
@@ -183,12 +189,12 @@ static struct kern_ipc_perm *ipc_findkey(struct ipc_ids *ids, key_t key)
 }
 
 /*
- * Insert new IPC object into idr tree, and set sequence number and id
+ * Insert new IPC object into xarray, and set sequence number and id
  * in the correct order.
  * Especially:
- * - the sequence number must be set before inserting the object into the idr,
- *   because the sequence number is accessed without a lock.
- * - the id can/must be set after inserting the object into the idr.
+ * - the sequence number must be set before inserting the object into the
+ *   xarray, because the sequence number is accessed without a lock.
+ * - the id can/must be set after inserting the object into the xarray.
  *   All accesses must be done after getting kern_ipc_perm.lock.
  *
  * The caller must own kern_ipc_perm.lock.of the new object.
@@ -198,64 +204,48 @@ static struct kern_ipc_perm *ipc_findkey(struct ipc_ids *ids, key_t key)
  * the sequence number is incremented only when the returned ID is less than
  * the last one.
  */
-static inline int ipc_idr_alloc(struct ipc_ids *ids, struct kern_ipc_perm *new)
+static inline int ipc_id_alloc(struct ipc_ids *ids, struct kern_ipc_perm *new)
 {
-	int idx, next_id = -1;
-
-#ifdef CONFIG_CHECKPOINT_RESTORE
-	next_id = ids->next_id;
-	ids->next_id = -1;
-#endif
-
-	/*
-	 * As soon as a new object is inserted into the idr,
-	 * ipc_obtain_object_idr() or ipc_obtain_object_check() can find it,
-	 * and the lockless preparations for ipc operations can start.
-	 * This means especially: permission checks, audit calls, allocation
-	 * of undo structures, ...
-	 *
-	 * Thus the object must be fully initialized, and if something fails,
-	 * then the full tear-down sequence must be followed.
-	 * (i.e.: set new->deleted, reduce refcount, call_rcu())
-	 */
+	u32 idx;
+	int err;
 
-	if (next_id < 0) { /* !CHECKPOINT_RESTORE or next_id is unset */
+	if (get_restore_id(ids) < 0) {
 		int max_idx;
 
 		max_idx = max(ids->in_use*3/2, ipc_min_cycle);
-		max_idx = min(max_idx, ipc_mni);
-
-		/* allocate the idx, with a NULL struct kern_ipc_perm */
-		idx = idr_alloc_cyclic(&ids->ipcs_idr, NULL, 0, max_idx,
-					GFP_NOWAIT);
-
-		if (idx >= 0) {
-			/*
-			 * idx got allocated successfully.
-			 * Now calculate the sequence number and set the
-			 * pointer for real.
-			 */
-			if (idx <= ids->last_idx) {
-				ids->seq++;
-				if (ids->seq >= ipcid_seq_max())
-					ids->seq = 0;
-			}
-			ids->last_idx = idx;
+		max_idx = min(max_idx, ipc_mni) - 1;
 
+		xa_lock(&ids->ipcs);
+
+		err = __xa_alloc_cyclic(&ids->ipcs, &idx, NULL,
+				XA_LIMIT(0, max_idx), &ids->next_idx,
+				GFP_KERNEL);
+		if (err == 1) {
+			ids->seq++;
+			if (ids->seq >= ipcid_seq_max())
+				ids->seq = 0;
+		}
+
+		if (err >= 0) {
 			new->seq = ids->seq;
-			/* no need for smp_wmb(), this is done
-			 * inside idr_replace, as part of
-			 * rcu_assign_pointer
-			 */
-			idr_replace(&ids->ipcs_idr, new, idx);
+			new->id = (new->seq << ipcmni_seq_shift()) + idx;
+			/* xa_store contains a write barrier */
+			__xa_store(&ids->ipcs, idx, new, GFP_KERNEL);
 		}
+
+		xa_unlock(&ids->ipcs);
 	} else {
-		new->seq = ipcid_to_seqx(next_id);
-		idx = idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id),
-				0, GFP_NOWAIT);
+		new->id = get_restore_id(ids);
+		new->seq = ipcid_to_seqx(new->id);
+		idx = ipcid_to_idx(new->id);
+		err = xa_insert(&ids->ipcs, idx, new, GFP_KERNEL);
+		set_restore_id(ids, -1);
 	}
-	if (idx >= 0)
-		new->id = (new->seq << ipcmni_seq_shift()) + idx;
+
+	if (err == -EBUSY)
+		return -ENOSPC;
+	if (err < 0)
+		return err;
 	return idx;
 }
 
@@ -278,7 +268,7 @@ int ipc_addid(struct ipc_ids *ids, struct kern_ipc_perm *new, int limit)
 {
 	kuid_t euid;
 	kgid_t egid;
-	int idx, err;
+	int idx;
 
 	/* 1) Initialize the refcount so that ipc_rcu_putref works */
 	refcount_set(&new->refcount, 1);
@@ -289,29 +279,42 @@ int ipc_addid(struct ipc_ids *ids, struct kern_ipc_perm *new, int limit)
 	if (ids->in_use >= limit)
 		return -ENOSPC;
 
-	idr_preload(GFP_KERNEL);
-
+	/*
+	 * 2) Hold the spinlock so that nobody else can access the object
+	 * once they can find it
+	 */
 	spin_lock_init(&new->lock);
-	rcu_read_lock();
 	spin_lock(&new->lock);
-
 	current_euid_egid(&euid, &egid);
 	new->cuid = new->uid = euid;
 	new->gid = new->cgid = egid;
-
 	new->deleted = false;
 
-	idx = ipc_idr_alloc(ids, new);
-	idr_preload_end();
+	idx = ipc_id_alloc(ids, new);
+
+	rcu_read_lock();
+
+	/*
+	 * As soon as a new object is inserted into the XArray,
+	 * ipc_obtain_object_idr() or ipc_obtain_object_check() can find it,
+	 * and the lockless preparations for ipc operations can start.
+	 * This means especially: permission checks, audit calls, allocation
+	 * of undo structures, ...
+	 *
+	 * Thus the object must be fully initialized, and if something fails,
+	 * then the full tear-down sequence must be followed.
+	 * (i.e.: set new->deleted, reduce refcount, call_rcu())
+	 */
 
 	if (idx >= 0 && new->key != IPC_PRIVATE) {
-		err = rhashtable_insert_fast(&ids->key_ht, &new->khtnode,
+		int err = rhashtable_insert_fast(&ids->key_ht, &new->khtnode,
 					     ipc_kht_params);
 		if (err < 0) {
-			idr_remove(&ids->ipcs_idr, idx);
+			xa_erase(&ids->ipcs, idx);
 			idx = err;
 		}
 	}
+
 	if (idx < 0) {
 		new->deleted = true;
 		spin_unlock(&new->lock);
@@ -462,7 +465,7 @@ void ipc_rmid(struct ipc_ids *ids, struct kern_ipc_perm *ipcp)
 {
 	int idx = ipcid_to_idx(ipcp->id);
 
-	idr_remove(&ids->ipcs_idr, idx);
+	xa_erase(&ids->ipcs, idx);
 	ipc_kht_remove(ids, ipcp);
 	ids->in_use--;
 	ipcp->deleted = true;
@@ -472,7 +475,7 @@ void ipc_rmid(struct ipc_ids *ids, struct kern_ipc_perm *ipcp)
 			idx--;
 			if (idx == -1)
 				break;
-		} while (!idr_find(&ids->ipcs_idr, idx));
+		} while (!xa_load(&ids->ipcs, idx));
 		ids->max_idx = idx;
 	}
 }
@@ -595,7 +598,7 @@ struct kern_ipc_perm *ipc_obtain_object_idr(struct ipc_ids *ids, int id)
 	struct kern_ipc_perm *out;
 	int idx = ipcid_to_idx(id);
 
-	out = idr_find(&ids->ipcs_idr, idx);
+	out = xa_load(&ids->ipcs, idx);
 	if (!out)
 		return ERR_PTR(-EINVAL);
 
@@ -754,31 +757,19 @@ struct pid_namespace *ipc_seq_pid_ns(struct seq_file *s)
 static struct kern_ipc_perm *sysvipc_find_ipc(struct ipc_ids *ids, loff_t pos,
 					      loff_t *new_pos)
 {
+	unsigned long index = pos;
 	struct kern_ipc_perm *ipc;
-	int total, id;
-
-	total = 0;
-	for (id = 0; id < pos && total < ids->in_use; id++) {
-		ipc = idr_find(&ids->ipcs_idr, id);
-		if (ipc != NULL)
-			total++;
-	}
 
 	*new_pos = pos + 1;
-	if (total >= ids->in_use)
+	rcu_read_lock();
+	ipc = xa_find(&ids->ipcs, &index, ULONG_MAX, XA_PRESENT);
+	if (!ipc) {
+		rcu_read_unlock();
 		return NULL;
-
-	for (; pos < ipc_mni; pos++) {
-		ipc = idr_find(&ids->ipcs_idr, pos);
-		if (ipc != NULL) {
-			rcu_read_lock();
-			ipc_lock_object(ipc);
-			return ipc;
-		}
 	}
 
-	/* Out of range - return NULL to terminate iteration */
-	return NULL;
+	ipc_lock_object(ipc);
+	return ipc;
 }
 
 static void *sysvipc_proc_next(struct seq_file *s, void *it, loff_t *pos)
diff --git a/ipc/util.h b/ipc/util.h
index 5766c61aed0e..04d49db4cefa 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -27,7 +27,7 @@
  */
 #define IPCMNI_SHIFT		15
 #define IPCMNI_EXTEND_SHIFT	24
-#define IPCMNI_EXTEND_MIN_CYCLE	(RADIX_TREE_MAP_SIZE * RADIX_TREE_MAP_SIZE)
+#define IPCMNI_EXTEND_MIN_CYCLE	(XA_CHUNK_SIZE * XA_CHUNK_SIZE)
 #define IPCMNI			(1 << IPCMNI_SHIFT)
 #define IPCMNI_EXTEND		(1 << IPCMNI_EXTEND_SHIFT)
 
@@ -42,7 +42,7 @@ extern int ipc_min_cycle;
 #else /* CONFIG_SYSVIPC_SYSCTL */
 
 #define ipc_mni			IPCMNI
-#define ipc_min_cycle		((int)RADIX_TREE_MAP_SIZE)
+#define ipc_min_cycle		((int)XA_CHUNK_SIZE)
 #define ipcmni_seq_shift()	IPCMNI_SHIFT
 #define IPCMNI_IDX_MASK		((1 << IPCMNI_SHIFT) - 1)
 #endif /* CONFIG_SYSVIPC_SYSCTL */
diff --git a/kernel/Makefile b/kernel/Makefile
index 4cb4130ced32..a42ac3a58994 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -23,6 +23,9 @@ endif
 # Prevents flicker of uninteresting __do_softirq()/__local_bh_disable_ip()
 # in coverage traces.
 KCOV_INSTRUMENT_softirq.o := n
+# Avoid KCSAN instrumentation in softirq ("No shared variables, all the data
+# are CPU local" => assume no data races), to reduce overhead in interrupts.
+KCSAN_SANITIZE_softirq.o = n
 # These are called from save_stack_trace() on slub debug path,
 # and produce insane amounts of uninteresting coverage.
 KCOV_INSTRUMENT_module.o := n
@@ -31,6 +34,7 @@ KCOV_INSTRUMENT_stacktrace.o := n
 # Don't self-instrument.
 KCOV_INSTRUMENT_kcov.o := n
 KASAN_SANITIZE_kcov.o := n
+KCSAN_SANITIZE_kcov.o := n
 CFLAGS_kcov.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector)
 
 # cond_syscall is currently not LTO compatible
@@ -103,6 +107,7 @@ obj-$(CONFIG_TRACEPOINTS) += trace/
 obj-$(CONFIG_IRQ_WORK) += irq_work.o
 obj-$(CONFIG_CPU_PM) += cpu_pm.o
 obj-$(CONFIG_BPF) += bpf/
+obj-$(CONFIG_KCSAN) += kcsan/
 
 obj-$(CONFIG_PERF_EVENTS) += events/
 
@@ -115,11 +120,13 @@ obj-$(CONFIG_TORTURE_TEST) += torture.o
 
 obj-$(CONFIG_HAS_IOMEM) += iomem.o
 obj-$(CONFIG_RSEQ) += rseq.o
+obj-$(CONFIG_WATCH_QUEUE) += watch_queue.o
 
 obj-$(CONFIG_SYSCTL_KUNIT_TEST) += sysctl-test.o
 
 obj-$(CONFIG_GCC_PLUGIN_STACKLEAK) += stackleak.o
 KASAN_SANITIZE_stackleak.o := n
+KCSAN_SANITIZE_stackleak.o := n
 KCOV_INSTRUMENT_stackleak.o := n
 
 $(obj)/configs.o: $(obj)/config_data.gz
diff --git a/kernel/audit.c b/kernel/audit.c
index 87f31bf1f0a0..8c201f414226 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -880,7 +880,7 @@ static int kauditd_thread(void *dummy)
 	return 0;
 }
 
-int audit_send_list(void *_dest)
+int audit_send_list_thread(void *_dest)
 {
 	struct audit_netlink_list *dest = _dest;
 	struct sk_buff *skb;
@@ -924,19 +924,30 @@ struct sk_buff *audit_make_reply(int seq, int type, int done,
 	return NULL;
 }
 
+static void audit_free_reply(struct audit_reply *reply)
+{
+	if (!reply)
+		return;
+
+	if (reply->skb)
+		kfree_skb(reply->skb);
+	if (reply->net)
+		put_net(reply->net);
+	kfree(reply);
+}
+
 static int audit_send_reply_thread(void *arg)
 {
 	struct audit_reply *reply = (struct audit_reply *)arg;
-	struct sock *sk = audit_get_sk(reply->net);
 
 	audit_ctl_lock();
 	audit_ctl_unlock();
 
 	/* Ignore failure. It'll only happen if the sender goes away,
 	   because our timeout is set to infinite. */
-	netlink_unicast(sk, reply->skb, reply->portid, 0);
-	put_net(reply->net);
-	kfree(reply);
+	netlink_unicast(audit_get_sk(reply->net), reply->skb, reply->portid, 0);
+	reply->skb = NULL;
+	audit_free_reply(reply);
 	return 0;
 }
 
@@ -950,35 +961,32 @@ static int audit_send_reply_thread(void *arg)
  * @payload: payload data
  * @size: payload size
  *
- * Allocates an skb, builds the netlink message, and sends it to the port id.
- * No failure notifications.
+ * Allocates a skb, builds the netlink message, and sends it to the port id.
  */
 static void audit_send_reply(struct sk_buff *request_skb, int seq, int type, int done,
 			     int multi, const void *payload, int size)
 {
-	struct net *net = sock_net(NETLINK_CB(request_skb).sk);
-	struct sk_buff *skb;
 	struct task_struct *tsk;
-	struct audit_reply *reply = kmalloc(sizeof(struct audit_reply),
-					    GFP_KERNEL);
+	struct audit_reply *reply;
 
+	reply = kzalloc(sizeof(*reply), GFP_KERNEL);
 	if (!reply)
 		return;
 
-	skb = audit_make_reply(seq, type, done, multi, payload, size);
-	if (!skb)
-		goto out;
-
-	reply->net = get_net(net);
+	reply->skb = audit_make_reply(seq, type, done, multi, payload, size);
+	if (!reply->skb)
+		goto err;
+	reply->net = get_net(sock_net(NETLINK_CB(request_skb).sk));
 	reply->portid = NETLINK_CB(request_skb).portid;
-	reply->skb = skb;
 
 	tsk = kthread_run(audit_send_reply_thread, reply, "audit_send_reply");
-	if (!IS_ERR(tsk))
-		return;
-	kfree_skb(skb);
-out:
-	kfree(reply);
+	if (IS_ERR(tsk))
+		goto err;
+
+	return;
+
+err:
+	audit_free_reply(reply);
 }
 
 /*
@@ -1525,20 +1533,60 @@ static void audit_receive(struct sk_buff  *skb)
 	audit_ctl_unlock();
 }
 
+/* Log information about who is connecting to the audit multicast socket */
+static void audit_log_multicast(int group, const char *op, int err)
+{
+	const struct cred *cred;
+	struct tty_struct *tty;
+	char comm[sizeof(current->comm)];
+	struct audit_buffer *ab;
+
+	if (!audit_enabled)
+		return;
+
+	ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_EVENT_LISTENER);
+	if (!ab)
+		return;
+
+	cred = current_cred();
+	tty = audit_get_tty();
+	audit_log_format(ab, "pid=%u uid=%u auid=%u tty=%s ses=%u",
+			 task_pid_nr(current),
+			 from_kuid(&init_user_ns, cred->uid),
+			 from_kuid(&init_user_ns, audit_get_loginuid(current)),
+			 tty ? tty_name(tty) : "(none)",
+			 audit_get_sessionid(current));
+	audit_put_tty(tty);
+	audit_log_task_context(ab); /* subj= */
+	audit_log_format(ab, " comm=");
+	audit_log_untrustedstring(ab, get_task_comm(comm, current));
+	audit_log_d_path_exe(ab, current->mm); /* exe= */
+	audit_log_format(ab, " nl-mcgrp=%d op=%s res=%d", group, op, !err);
+	audit_log_end(ab);
+}
+
 /* Run custom bind function on netlink socket group connect or bind requests. */
-static int audit_bind(struct net *net, int group)
+static int audit_multicast_bind(struct net *net, int group)
 {
+	int err = 0;
+
 	if (!capable(CAP_AUDIT_READ))
-		return -EPERM;
+		err = -EPERM;
+	audit_log_multicast(group, "connect", err);
+	return err;
+}
 
-	return 0;
+static void audit_multicast_unbind(struct net *net, int group)
+{
+	audit_log_multicast(group, "disconnect", 0);
 }
 
 static int __net_init audit_net_init(struct net *net)
 {
 	struct netlink_kernel_cfg cfg = {
 		.input	= audit_receive,
-		.bind	= audit_bind,
+		.bind	= audit_multicast_bind,
+		.unbind	= audit_multicast_unbind,
 		.flags	= NL_CFG_F_NONROOT_RECV,
 		.groups	= AUDIT_NLGRP_MAX,
 	};
diff --git a/kernel/audit.h b/kernel/audit.h
index 2eed4d231624..f0233dc40b17 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -229,7 +229,7 @@ struct audit_netlink_list {
 	struct sk_buff_head q;
 };
 
-int audit_send_list(void *_dest);
+int audit_send_list_thread(void *_dest);
 
 extern int selinux_audit_rule_update(void);
 
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 026e34da4ace..a10e2997aa6c 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1161,11 +1161,8 @@ int audit_rule_change(int type, int seq, void *data, size_t datasz)
  */
 int audit_list_rules_send(struct sk_buff *request_skb, int seq)
 {
-	u32 portid = NETLINK_CB(request_skb).portid;
-	struct net *net = sock_net(NETLINK_CB(request_skb).sk);
 	struct task_struct *tsk;
 	struct audit_netlink_list *dest;
-	int err = 0;
 
 	/* We can't just spew out the rules here because we might fill
 	 * the available socket buffer space and deadlock waiting for
@@ -1173,25 +1170,26 @@ int audit_list_rules_send(struct sk_buff *request_skb, int seq)
 	 * happen if we're actually running in the context of auditctl
 	 * trying to _send_ the stuff */
 
-	dest = kmalloc(sizeof(struct audit_netlink_list), GFP_KERNEL);
+	dest = kmalloc(sizeof(*dest), GFP_KERNEL);
 	if (!dest)
 		return -ENOMEM;
-	dest->net = get_net(net);
-	dest->portid = portid;
+	dest->net = get_net(sock_net(NETLINK_CB(request_skb).sk));
+	dest->portid = NETLINK_CB(request_skb).portid;
 	skb_queue_head_init(&dest->q);
 
 	mutex_lock(&audit_filter_mutex);
 	audit_list_rules(seq, &dest->q);
 	mutex_unlock(&audit_filter_mutex);
 
-	tsk = kthread_run(audit_send_list, dest, "audit_send_list");
+	tsk = kthread_run(audit_send_list_thread, dest, "audit_send_list");
 	if (IS_ERR(tsk)) {
 		skb_queue_purge(&dest->q);
+		put_net(dest->net);
 		kfree(dest);
-		err = PTR_ERR(tsk);
+		return PTR_ERR(tsk);
 	}
 
-	return err;
+	return 0;
 }
 
 int audit_comparator(u32 left, u32 op, u32 right)
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 814406a35db1..d281c18d1771 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -130,6 +130,17 @@ struct audit_tree_refs {
 	struct audit_chunk *c[31];
 };
 
+struct audit_nfcfgop_tab {
+	enum audit_nfcfgop	op;
+	const char		*s;
+};
+
+const struct audit_nfcfgop_tab audit_nfcfgs[] = {
+	{ AUDIT_XT_OP_REGISTER,		"register"	},
+	{ AUDIT_XT_OP_REPLACE,		"replace"	},
+	{ AUDIT_XT_OP_UNREGISTER,	"unregister"	},
+};
+
 static int audit_match_perm(struct audit_context *ctx, int mask)
 {
 	unsigned n;
@@ -2542,6 +2553,20 @@ void __audit_ntp_log(const struct audit_ntp_data *ad)
 	audit_log_ntp_val(ad, "adjust",	AUDIT_NTP_ADJUST);
 }
 
+void __audit_log_nfcfg(const char *name, u8 af, unsigned int nentries,
+		       enum audit_nfcfgop op)
+{
+	struct audit_buffer *ab;
+
+	ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_NETFILTER_CFG);
+	if (!ab)
+		return;
+	audit_log_format(ab, "table=%s family=%u entries=%u op=%s",
+			 name, af, nentries, audit_nfcfgs[op].s);
+	audit_log_end(ab);
+}
+EXPORT_SYMBOL_GPL(__audit_log_nfcfg);
+
 static void audit_log_task(struct audit_buffer *ab)
 {
 	kuid_t auid, uid;
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index d65c6912bdaf..a2cfba89a8e1 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -3482,6 +3482,7 @@ extern char __weak __stop_BTF[];
 extern struct btf *btf_vmlinux;
 
 #define BPF_MAP_TYPE(_id, _ops)
+#define BPF_LINK_TYPE(_id, _name)
 static union {
 	struct bpf_ctx_convert {
 #define BPF_PROG_TYPE(_id, _name, prog_ctx_type, kern_ctx_type) \
@@ -3508,6 +3509,7 @@ static u8 bpf_ctx_convert_map[] = {
 	0, /* avoid empty array */
 };
 #undef BPF_MAP_TYPE
+#undef BPF_LINK_TYPE
 
 static const struct btf_member *
 btf_get_prog_ctx_type(struct bpf_verifier_log *log, struct btf *btf,
diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c
index cb305e71e7de..5c0e964105ac 100644
--- a/kernel/bpf/cgroup.c
+++ b/kernel/bpf/cgroup.c
@@ -557,8 +557,9 @@ static void replace_effective_prog(struct cgroup *cgrp,
  *
  * Must be called with cgroup_mutex held.
  */
-int __cgroup_bpf_replace(struct cgroup *cgrp, struct bpf_cgroup_link *link,
-			 struct bpf_prog *new_prog)
+static int __cgroup_bpf_replace(struct cgroup *cgrp,
+				struct bpf_cgroup_link *link,
+				struct bpf_prog *new_prog)
 {
 	struct list_head *progs = &cgrp->bpf.progs[link->type];
 	struct bpf_prog *old_prog;
@@ -583,6 +584,30 @@ int __cgroup_bpf_replace(struct cgroup *cgrp, struct bpf_cgroup_link *link,
 	return 0;
 }
 
+static int cgroup_bpf_replace(struct bpf_link *link, struct bpf_prog *new_prog,
+			      struct bpf_prog *old_prog)
+{
+	struct bpf_cgroup_link *cg_link;
+	int ret;
+
+	cg_link = container_of(link, struct bpf_cgroup_link, link);
+
+	mutex_lock(&cgroup_mutex);
+	/* link might have been auto-released by dying cgroup, so fail */
+	if (!cg_link->cgroup) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	if (old_prog && link->prog != old_prog) {
+		ret = -EPERM;
+		goto out_unlock;
+	}
+	ret = __cgroup_bpf_replace(cg_link->cgroup, cg_link, new_prog);
+out_unlock:
+	mutex_unlock(&cgroup_mutex);
+	return ret;
+}
+
 static struct bpf_prog_list *find_detach_entry(struct list_head *progs,
 					       struct bpf_prog *prog,
 					       struct bpf_cgroup_link *link,
@@ -808,17 +833,56 @@ static void bpf_cgroup_link_dealloc(struct bpf_link *link)
 	kfree(cg_link);
 }
 
-const struct bpf_link_ops bpf_cgroup_link_lops = {
+static void bpf_cgroup_link_show_fdinfo(const struct bpf_link *link,
+					struct seq_file *seq)
+{
+	struct bpf_cgroup_link *cg_link =
+		container_of(link, struct bpf_cgroup_link, link);
+	u64 cg_id = 0;
+
+	mutex_lock(&cgroup_mutex);
+	if (cg_link->cgroup)
+		cg_id = cgroup_id(cg_link->cgroup);
+	mutex_unlock(&cgroup_mutex);
+
+	seq_printf(seq,
+		   "cgroup_id:\t%llu\n"
+		   "attach_type:\t%d\n",
+		   cg_id,
+		   cg_link->type);
+}
+
+static int bpf_cgroup_link_fill_link_info(const struct bpf_link *link,
+					  struct bpf_link_info *info)
+{
+	struct bpf_cgroup_link *cg_link =
+		container_of(link, struct bpf_cgroup_link, link);
+	u64 cg_id = 0;
+
+	mutex_lock(&cgroup_mutex);
+	if (cg_link->cgroup)
+		cg_id = cgroup_id(cg_link->cgroup);
+	mutex_unlock(&cgroup_mutex);
+
+	info->cgroup.cgroup_id = cg_id;
+	info->cgroup.attach_type = cg_link->type;
+	return 0;
+}
+
+static const struct bpf_link_ops bpf_cgroup_link_lops = {
 	.release = bpf_cgroup_link_release,
 	.dealloc = bpf_cgroup_link_dealloc,
+	.update_prog = cgroup_bpf_replace,
+	.show_fdinfo = bpf_cgroup_link_show_fdinfo,
+	.fill_link_info = bpf_cgroup_link_fill_link_info,
 };
 
 int cgroup_bpf_link_attach(const union bpf_attr *attr, struct bpf_prog *prog)
 {
+	struct bpf_link_primer link_primer;
 	struct bpf_cgroup_link *link;
-	struct file *link_file;
 	struct cgroup *cgrp;
-	int err, link_fd;
+	int err;
 
 	if (attr->link_create.flags)
 		return -EINVAL;
@@ -832,26 +896,25 @@ int cgroup_bpf_link_attach(const union bpf_attr *attr, struct bpf_prog *prog)
 		err = -ENOMEM;
 		goto out_put_cgroup;
 	}
-	bpf_link_init(&link->link, &bpf_cgroup_link_lops, prog);
+	bpf_link_init(&link->link, BPF_LINK_TYPE_CGROUP, &bpf_cgroup_link_lops,
+		      prog);
 	link->cgroup = cgrp;
 	link->type = attr->link_create.attach_type;
 
-	link_file = bpf_link_new_file(&link->link, &link_fd);
-	if (IS_ERR(link_file)) {
+	err  = bpf_link_prime(&link->link, &link_primer);
+	if (err) {
 		kfree(link);
-		err = PTR_ERR(link_file);
 		goto out_put_cgroup;
 	}
 
 	err = cgroup_bpf_attach(cgrp, NULL, NULL, link, link->type,
 				BPF_F_ALLOW_MULTI);
 	if (err) {
-		bpf_link_cleanup(&link->link, link_file, link_fd);
+		bpf_link_cleanup(&link_primer);
 		goto out_put_cgroup;
 	}
 
-	fd_install(link_fd, link_file);
-	return link_fd;
+	return bpf_link_settle(&link_primer);
 
 out_put_cgroup:
 	cgroup_put(cgrp);
@@ -1054,36 +1117,21 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor,
 
 	return !allow;
 }
-EXPORT_SYMBOL(__cgroup_bpf_check_dev_permission);
 
 static const struct bpf_func_proto *
 cgroup_base_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 {
 	switch (func_id) {
-	case BPF_FUNC_map_lookup_elem:
-		return &bpf_map_lookup_elem_proto;
-	case BPF_FUNC_map_update_elem:
-		return &bpf_map_update_elem_proto;
-	case BPF_FUNC_map_delete_elem:
-		return &bpf_map_delete_elem_proto;
-	case BPF_FUNC_map_push_elem:
-		return &bpf_map_push_elem_proto;
-	case BPF_FUNC_map_pop_elem:
-		return &bpf_map_pop_elem_proto;
-	case BPF_FUNC_map_peek_elem:
-		return &bpf_map_peek_elem_proto;
 	case BPF_FUNC_get_current_uid_gid:
 		return &bpf_get_current_uid_gid_proto;
 	case BPF_FUNC_get_local_storage:
 		return &bpf_get_local_storage_proto;
 	case BPF_FUNC_get_current_cgroup_id:
 		return &bpf_get_current_cgroup_id_proto;
-	case BPF_FUNC_trace_printk:
-		if (capable(CAP_SYS_ADMIN))
-			return bpf_get_trace_printk_proto();
-		/* fall through */
+	case BPF_FUNC_perf_event_output:
+		return &bpf_event_output_data_proto;
 	default:
-		return NULL;
+		return bpf_base_func_proto(func_id);
 	}
 }
 
@@ -1137,16 +1185,13 @@ const struct bpf_verifier_ops cg_dev_verifier_ops = {
  * @head: sysctl table header
  * @table: sysctl table
  * @write: sysctl is being read (= 0) or written (= 1)
- * @buf: pointer to buffer passed by user space
+ * @buf: pointer to buffer (in and out)
  * @pcount: value-result argument: value is size of buffer pointed to by @buf,
  *	result is size of @new_buf if program set new value, initial value
  *	otherwise
  * @ppos: value-result argument: value is position at which read from or write
  *	to sysctl is happening, result is new position if program overrode it,
  *	initial value otherwise
- * @new_buf: pointer to pointer to new buffer that will be allocated if program
- *	overrides new value provided by user space on sysctl write
- *	NOTE: it's caller responsibility to free *new_buf if it was set
  * @type: type of program to be executed
  *
  * Program is run when sysctl is being accessed, either read or written, and
@@ -1157,8 +1202,7 @@ const struct bpf_verifier_ops cg_dev_verifier_ops = {
  */
 int __cgroup_bpf_run_filter_sysctl(struct ctl_table_header *head,
 				   struct ctl_table *table, int write,
-				   void __user *buf, size_t *pcount,
-				   loff_t *ppos, void **new_buf,
+				   void **buf, size_t *pcount, loff_t *ppos,
 				   enum bpf_attach_type type)
 {
 	struct bpf_sysctl_kern ctx = {
@@ -1173,36 +1217,28 @@ int __cgroup_bpf_run_filter_sysctl(struct ctl_table_header *head,
 		.new_updated = 0,
 	};
 	struct cgroup *cgrp;
+	loff_t pos = 0;
 	int ret;
 
 	ctx.cur_val = kmalloc_track_caller(ctx.cur_len, GFP_KERNEL);
-	if (ctx.cur_val) {
-		mm_segment_t old_fs;
-		loff_t pos = 0;
-
-		old_fs = get_fs();
-		set_fs(KERNEL_DS);
-		if (table->proc_handler(table, 0, (void __user *)ctx.cur_val,
-					&ctx.cur_len, &pos)) {
-			/* Let BPF program decide how to proceed. */
-			ctx.cur_len = 0;
-		}
-		set_fs(old_fs);
-	} else {
+	if (!ctx.cur_val ||
+	    table->proc_handler(table, 0, ctx.cur_val, &ctx.cur_len, &pos)) {
 		/* Let BPF program decide how to proceed. */
 		ctx.cur_len = 0;
 	}
 
-	if (write && buf && *pcount) {
+	if (write && *buf && *pcount) {
 		/* BPF program should be able to override new value with a
 		 * buffer bigger than provided by user.
 		 */
 		ctx.new_val = kmalloc_track_caller(PAGE_SIZE, GFP_KERNEL);
 		ctx.new_len = min_t(size_t, PAGE_SIZE, *pcount);
-		if (!ctx.new_val ||
-		    copy_from_user(ctx.new_val, buf, ctx.new_len))
+		if (ctx.new_val) {
+			memcpy(ctx.new_val, *buf, ctx.new_len);
+		} else {
 			/* Let BPF program decide how to proceed. */
 			ctx.new_len = 0;
+		}
 	}
 
 	rcu_read_lock();
@@ -1213,7 +1249,8 @@ int __cgroup_bpf_run_filter_sysctl(struct ctl_table_header *head,
 	kfree(ctx.cur_val);
 
 	if (ret == 1 && ctx.new_updated) {
-		*new_buf = ctx.new_val;
+		kfree(*buf);
+		*buf = ctx.new_val;
 		*pcount = ctx.new_len;
 	} else {
 		kfree(ctx.new_val);
@@ -1221,7 +1258,6 @@ int __cgroup_bpf_run_filter_sysctl(struct ctl_table_header *head,
 
 	return ret == 1 ? 0 : -EPERM;
 }
-EXPORT_SYMBOL(__cgroup_bpf_run_filter_sysctl);
 
 #ifdef CONFIG_NET
 static bool __cgroup_bpf_prog_array_is_empty(struct cgroup *cgrp,
@@ -1326,7 +1362,6 @@ int __cgroup_bpf_run_filter_setsockopt(struct sock *sk, int *level,
 		sockopt_free_buf(&ctx);
 	return ret;
 }
-EXPORT_SYMBOL(__cgroup_bpf_run_filter_setsockopt);
 
 int __cgroup_bpf_run_filter_getsockopt(struct sock *sk, int level,
 				       int optname, char __user *optval,
@@ -1413,7 +1448,6 @@ int __cgroup_bpf_run_filter_getsockopt(struct sock *sk, int level,
 	sockopt_free_buf(&ctx);
 	return ret;
 }
-EXPORT_SYMBOL(__cgroup_bpf_run_filter_getsockopt);
 #endif
 
 static ssize_t sysctl_cpy_dir(const struct ctl_dir *dir, char **bufp,
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 916f5132a984..1f409a319fea 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -82,7 +82,7 @@ struct bpf_prog *bpf_prog_alloc_no_stats(unsigned int size, gfp_t gfp_extra_flag
 	struct bpf_prog *fp;
 
 	size = round_up(size, PAGE_SIZE);
-	fp = __vmalloc(size, gfp_flags, PAGE_KERNEL);
+	fp = __vmalloc(size, gfp_flags);
 	if (fp == NULL)
 		return NULL;
 
@@ -232,7 +232,7 @@ struct bpf_prog *bpf_prog_realloc(struct bpf_prog *fp_old, unsigned int size,
 	if (ret)
 		return NULL;
 
-	fp = __vmalloc(size, gfp_flags, PAGE_KERNEL);
+	fp = __vmalloc(size, gfp_flags);
 	if (fp == NULL) {
 		__bpf_prog_uncharge(fp_old->aux->user, delta);
 	} else {
@@ -1089,7 +1089,7 @@ static struct bpf_prog *bpf_prog_clone_create(struct bpf_prog *fp_other,
 	gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | gfp_extra_flags;
 	struct bpf_prog *fp;
 
-	fp = __vmalloc(fp_other->pages * PAGE_SIZE, gfp_flags, PAGE_KERNEL);
+	fp = __vmalloc(fp_other->pages * PAGE_SIZE, gfp_flags);
 	if (fp != NULL) {
 		/* aux->prog still points to the fp_other one, so
 		 * when promoting the clone to the real program,
@@ -2136,6 +2136,11 @@ BPF_CALL_0(bpf_user_rnd_u32)
 	return res;
 }
 
+BPF_CALL_0(bpf_get_raw_cpu_id)
+{
+	return raw_smp_processor_id();
+}
+
 /* Weak definitions of helper functions in case we don't have bpf syscall. */
 const struct bpf_func_proto bpf_map_lookup_elem_proto __weak;
 const struct bpf_func_proto bpf_map_update_elem_proto __weak;
@@ -2151,6 +2156,7 @@ const struct bpf_func_proto bpf_get_prandom_u32_proto __weak;
 const struct bpf_func_proto bpf_get_smp_processor_id_proto __weak;
 const struct bpf_func_proto bpf_get_numa_node_id_proto __weak;
 const struct bpf_func_proto bpf_ktime_get_ns_proto __weak;
+const struct bpf_func_proto bpf_ktime_get_boot_ns_proto __weak;
 
 const struct bpf_func_proto bpf_get_current_pid_tgid_proto __weak;
 const struct bpf_func_proto bpf_get_current_uid_gid_proto __weak;
diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c
index 58bdca5d978a..a51d9fb7a359 100644
--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -52,7 +52,6 @@
 #define DEV_CREATE_FLAG_MASK \
 	(BPF_F_NUMA_NODE | BPF_F_RDONLY | BPF_F_WRONLY)
 
-#define DEV_MAP_BULK_SIZE 16
 struct xdp_dev_bulk_queue {
 	struct xdp_frame *q[DEV_MAP_BULK_SIZE];
 	struct list_head flush_node;
diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index bafc53ddd350..5c0290e0696e 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -151,7 +151,19 @@ BPF_CALL_0(bpf_ktime_get_ns)
 
 const struct bpf_func_proto bpf_ktime_get_ns_proto = {
 	.func		= bpf_ktime_get_ns,
-	.gpl_only	= true,
+	.gpl_only	= false,
+	.ret_type	= RET_INTEGER,
+};
+
+BPF_CALL_0(bpf_ktime_get_boot_ns)
+{
+	/* NMI safe access to clock boottime */
+	return ktime_get_boot_fast_ns();
+}
+
+const struct bpf_func_proto bpf_ktime_get_boot_ns_proto = {
+	.func		= bpf_ktime_get_boot_ns,
+	.gpl_only	= false,
 	.ret_type	= RET_INTEGER,
 };
 
@@ -562,3 +574,78 @@ const struct bpf_func_proto bpf_get_ns_current_pid_tgid_proto = {
 	.arg3_type      = ARG_PTR_TO_UNINIT_MEM,
 	.arg4_type      = ARG_CONST_SIZE,
 };
+
+static const struct bpf_func_proto bpf_get_raw_smp_processor_id_proto = {
+	.func		= bpf_get_raw_cpu_id,
+	.gpl_only	= false,
+	.ret_type	= RET_INTEGER,
+};
+
+BPF_CALL_5(bpf_event_output_data, void *, ctx, struct bpf_map *, map,
+	   u64, flags, void *, data, u64, size)
+{
+	if (unlikely(flags & ~(BPF_F_INDEX_MASK)))
+		return -EINVAL;
+
+	return bpf_event_output(map, flags, data, size, NULL, 0, NULL);
+}
+
+const struct bpf_func_proto bpf_event_output_data_proto =  {
+	.func		= bpf_event_output_data,
+	.gpl_only       = true,
+	.ret_type       = RET_INTEGER,
+	.arg1_type      = ARG_PTR_TO_CTX,
+	.arg2_type      = ARG_CONST_MAP_PTR,
+	.arg3_type      = ARG_ANYTHING,
+	.arg4_type      = ARG_PTR_TO_MEM,
+	.arg5_type      = ARG_CONST_SIZE_OR_ZERO,
+};
+
+const struct bpf_func_proto *
+bpf_base_func_proto(enum bpf_func_id func_id)
+{
+	switch (func_id) {
+	case BPF_FUNC_map_lookup_elem:
+		return &bpf_map_lookup_elem_proto;
+	case BPF_FUNC_map_update_elem:
+		return &bpf_map_update_elem_proto;
+	case BPF_FUNC_map_delete_elem:
+		return &bpf_map_delete_elem_proto;
+	case BPF_FUNC_map_push_elem:
+		return &bpf_map_push_elem_proto;
+	case BPF_FUNC_map_pop_elem:
+		return &bpf_map_pop_elem_proto;
+	case BPF_FUNC_map_peek_elem:
+		return &bpf_map_peek_elem_proto;
+	case BPF_FUNC_get_prandom_u32:
+		return &bpf_get_prandom_u32_proto;
+	case BPF_FUNC_get_smp_processor_id:
+		return &bpf_get_raw_smp_processor_id_proto;
+	case BPF_FUNC_get_numa_node_id:
+		return &bpf_get_numa_node_id_proto;
+	case BPF_FUNC_tail_call:
+		return &bpf_tail_call_proto;
+	case BPF_FUNC_ktime_get_ns:
+		return &bpf_ktime_get_ns_proto;
+	case BPF_FUNC_ktime_get_boot_ns:
+		return &bpf_ktime_get_boot_ns_proto;
+	default:
+		break;
+	}
+
+	if (!capable(CAP_SYS_ADMIN))
+		return NULL;
+
+	switch (func_id) {
+	case BPF_FUNC_spin_lock:
+		return &bpf_spin_lock_proto;
+	case BPF_FUNC_spin_unlock:
+		return &bpf_spin_unlock_proto;
+	case BPF_FUNC_trace_printk:
+		return bpf_get_trace_printk_proto();
+	case BPF_FUNC_jiffies64:
+		return &bpf_jiffies64_proto;
+	default:
+		return NULL;
+	}
+}
diff --git a/kernel/bpf/queue_stack_maps.c b/kernel/bpf/queue_stack_maps.c
index f697647ceb54..30e1373fd437 100644
--- a/kernel/bpf/queue_stack_maps.c
+++ b/kernel/bpf/queue_stack_maps.c
@@ -19,7 +19,7 @@ struct bpf_queue_stack {
 	u32 head, tail;
 	u32 size; /* max_entries + 1 */
 
-	char elements[0] __aligned(8);
+	char elements[] __aligned(8);
 };
 
 static struct bpf_queue_stack *bpf_queue_stack(struct bpf_map *map)
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 7626b8024471..5e86d8749e6e 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -25,6 +25,7 @@
 #include <linux/nospec.h>
 #include <linux/audit.h>
 #include <uapi/linux/btf.h>
+#include <asm/pgtable.h>
 #include <linux/bpf_lsm.h>
 
 #define IS_FD_ARRAY(map) ((map)->map_type == BPF_MAP_TYPE_PERF_EVENT_ARRAY || \
@@ -42,6 +43,8 @@ static DEFINE_IDR(prog_idr);
 static DEFINE_SPINLOCK(prog_idr_lock);
 static DEFINE_IDR(map_idr);
 static DEFINE_SPINLOCK(map_idr_lock);
+static DEFINE_IDR(link_idr);
+static DEFINE_SPINLOCK(link_idr_lock);
 
 int sysctl_unprivileged_bpf_disabled __read_mostly;
 
@@ -49,9 +52,11 @@ static const struct bpf_map_ops * const bpf_map_types[] = {
 #define BPF_PROG_TYPE(_id, _name, prog_ctx_type, kern_ctx_type)
 #define BPF_MAP_TYPE(_id, _ops) \
 	[_id] = &_ops,
+#define BPF_LINK_TYPE(_id, _name)
 #include <linux/bpf_types.h>
 #undef BPF_PROG_TYPE
 #undef BPF_MAP_TYPE
+#undef BPF_LINK_TYPE
 };
 
 /*
@@ -281,27 +286,29 @@ static void *__bpf_map_area_alloc(u64 size, int numa_node, bool mmapable)
 	 * __GFP_RETRY_MAYFAIL to avoid such situations.
 	 */
 
-	const gfp_t flags = __GFP_NOWARN | __GFP_ZERO;
+	const gfp_t gfp = __GFP_NOWARN | __GFP_ZERO;
+	unsigned int flags = 0;
+	unsigned long align = 1;
 	void *area;
 
 	if (size >= SIZE_MAX)
 		return NULL;
 
 	/* kmalloc()'ed memory can't be mmap()'ed */
-	if (!mmapable && size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
-		area = kmalloc_node(size, GFP_USER | __GFP_NORETRY | flags,
+	if (mmapable) {
+		BUG_ON(!PAGE_ALIGNED(size));
+		align = SHMLBA;
+		flags = VM_USERMAP;
+	} else if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
+		area = kmalloc_node(size, gfp | GFP_USER | __GFP_NORETRY,
 				    numa_node);
 		if (area != NULL)
 			return area;
 	}
-	if (mmapable) {
-		BUG_ON(!PAGE_ALIGNED(size));
-		return vmalloc_user_node_flags(size, numa_node, GFP_KERNEL |
-					       __GFP_RETRY_MAYFAIL | flags);
-	}
-	return __vmalloc_node_flags_caller(size, numa_node,
-					   GFP_KERNEL | __GFP_RETRY_MAYFAIL |
-					   flags, __builtin_return_address(0));
+
+	return __vmalloc_node_range(size, align, VMALLOC_START, VMALLOC_END,
+			gfp | GFP_KERNEL | __GFP_RETRY_MAYFAIL, PAGE_KERNEL,
+			flags, numa_node, __builtin_return_address(0));
 }
 
 void *bpf_map_area_alloc(u64 size, int numa_node)
@@ -1546,9 +1553,11 @@ static const struct bpf_prog_ops * const bpf_prog_types[] = {
 #define BPF_PROG_TYPE(_id, _name, prog_ctx_type, kern_ctx_type) \
 	[_id] = & _name ## _prog_ops,
 #define BPF_MAP_TYPE(_id, _ops)
+#define BPF_LINK_TYPE(_id, _name)
 #include <linux/bpf_types.h>
 #undef BPF_PROG_TYPE
 #undef BPF_MAP_TYPE
+#undef BPF_LINK_TYPE
 };
 
 static int find_prog_type(enum bpf_prog_type type, struct bpf_prog *prog)
@@ -2181,25 +2190,39 @@ static int bpf_obj_get(const union bpf_attr *attr)
 				attr->file_flags);
 }
 
-void bpf_link_init(struct bpf_link *link, const struct bpf_link_ops *ops,
-		   struct bpf_prog *prog)
+void bpf_link_init(struct bpf_link *link, enum bpf_link_type type,
+		   const struct bpf_link_ops *ops, struct bpf_prog *prog)
 {
 	atomic64_set(&link->refcnt, 1);
+	link->type = type;
+	link->id = 0;
 	link->ops = ops;
 	link->prog = prog;
 }
 
+static void bpf_link_free_id(int id)
+{
+	if (!id)
+		return;
+
+	spin_lock_bh(&link_idr_lock);
+	idr_remove(&link_idr, id);
+	spin_unlock_bh(&link_idr_lock);
+}
+
 /* Clean up bpf_link and corresponding anon_inode file and FD. After
  * anon_inode is created, bpf_link can't be just kfree()'d due to deferred
- * anon_inode's release() call. This helper manages marking bpf_link as
- * defunct, releases anon_inode file and puts reserved FD.
+ * anon_inode's release() call. This helper marksbpf_link as
+ * defunct, releases anon_inode file and puts reserved FD. bpf_prog's refcnt
+ * is not decremented, it's the responsibility of a calling code that failed
+ * to complete bpf_link initialization.
  */
-void bpf_link_cleanup(struct bpf_link *link, struct file *link_file,
-		      int link_fd)
+void bpf_link_cleanup(struct bpf_link_primer *primer)
 {
-	link->prog = NULL;
-	fput(link_file);
-	put_unused_fd(link_fd);
+	primer->link->prog = NULL;
+	bpf_link_free_id(primer->id);
+	fput(primer->file);
+	put_unused_fd(primer->fd);
 }
 
 void bpf_link_inc(struct bpf_link *link)
@@ -2210,6 +2233,7 @@ void bpf_link_inc(struct bpf_link *link)
 /* bpf_link_free is guaranteed to be called from process context */
 static void bpf_link_free(struct bpf_link *link)
 {
+	bpf_link_free_id(link->id);
 	if (link->prog) {
 		/* detach BPF program, clean up used resources */
 		link->ops->release(link);
@@ -2251,35 +2275,35 @@ static int bpf_link_release(struct inode *inode, struct file *filp)
 }
 
 #ifdef CONFIG_PROC_FS
-static const struct bpf_link_ops bpf_raw_tp_lops;
-static const struct bpf_link_ops bpf_tracing_link_lops;
+#define BPF_PROG_TYPE(_id, _name, prog_ctx_type, kern_ctx_type)
+#define BPF_MAP_TYPE(_id, _ops)
+#define BPF_LINK_TYPE(_id, _name) [_id] = #_name,
+static const char *bpf_link_type_strs[] = {
+	[BPF_LINK_TYPE_UNSPEC] = "<invalid>",
+#include <linux/bpf_types.h>
+};
+#undef BPF_PROG_TYPE
+#undef BPF_MAP_TYPE
+#undef BPF_LINK_TYPE
 
 static void bpf_link_show_fdinfo(struct seq_file *m, struct file *filp)
 {
 	const struct bpf_link *link = filp->private_data;
 	const struct bpf_prog *prog = link->prog;
 	char prog_tag[sizeof(prog->tag) * 2 + 1] = { };
-	const char *link_type;
-
-	if (link->ops == &bpf_raw_tp_lops)
-		link_type = "raw_tracepoint";
-	else if (link->ops == &bpf_tracing_link_lops)
-		link_type = "tracing";
-#ifdef CONFIG_CGROUP_BPF
-	else if (link->ops == &bpf_cgroup_link_lops)
-		link_type = "cgroup";
-#endif
-	else
-		link_type = "unknown";
 
 	bin2hex(prog_tag, prog->tag, sizeof(prog->tag));
 	seq_printf(m,
 		   "link_type:\t%s\n"
+		   "link_id:\t%u\n"
 		   "prog_tag:\t%s\n"
 		   "prog_id:\t%u\n",
-		   link_type,
+		   bpf_link_type_strs[link->type],
+		   link->id,
 		   prog_tag,
 		   prog->aux->id);
+	if (link->ops->show_fdinfo)
+		link->ops->show_fdinfo(link, m);
 }
 #endif
 
@@ -2292,36 +2316,76 @@ static const struct file_operations bpf_link_fops = {
 	.write		= bpf_dummy_write,
 };
 
-int bpf_link_new_fd(struct bpf_link *link)
+static int bpf_link_alloc_id(struct bpf_link *link)
 {
-	return anon_inode_getfd("bpf-link", &bpf_link_fops, link, O_CLOEXEC);
-}
+	int id;
+
+	idr_preload(GFP_KERNEL);
+	spin_lock_bh(&link_idr_lock);
+	id = idr_alloc_cyclic(&link_idr, link, 1, INT_MAX, GFP_ATOMIC);
+	spin_unlock_bh(&link_idr_lock);
+	idr_preload_end();
 
-/* Similar to bpf_link_new_fd, create anon_inode for given bpf_link, but
- * instead of immediately installing fd in fdtable, just reserve it and
- * return. Caller then need to either install it with fd_install(fd, file) or
- * release with put_unused_fd(fd).
- * This is useful for cases when bpf_link attachment/detachment are
- * complicated and expensive operations and should be delayed until all the fd
- * reservation and anon_inode creation succeeds.
+	return id;
+}
+
+/* Prepare bpf_link to be exposed to user-space by allocating anon_inode file,
+ * reserving unused FD and allocating ID from link_idr. This is to be paired
+ * with bpf_link_settle() to install FD and ID and expose bpf_link to
+ * user-space, if bpf_link is successfully attached. If not, bpf_link and
+ * pre-allocated resources are to be freed with bpf_cleanup() call. All the
+ * transient state is passed around in struct bpf_link_primer.
+ * This is preferred way to create and initialize bpf_link, especially when
+ * there are complicated and expensive operations inbetween creating bpf_link
+ * itself and attaching it to BPF hook. By using bpf_link_prime() and
+ * bpf_link_settle() kernel code using bpf_link doesn't have to perform
+ * expensive (and potentially failing) roll back operations in a rare case
+ * that file, FD, or ID can't be allocated.
  */
-struct file *bpf_link_new_file(struct bpf_link *link, int *reserved_fd)
+int bpf_link_prime(struct bpf_link *link, struct bpf_link_primer *primer)
 {
 	struct file *file;
-	int fd;
+	int fd, id;
 
 	fd = get_unused_fd_flags(O_CLOEXEC);
 	if (fd < 0)
-		return ERR_PTR(fd);
+		return fd;
 
 	file = anon_inode_getfile("bpf_link", &bpf_link_fops, link, O_CLOEXEC);
 	if (IS_ERR(file)) {
 		put_unused_fd(fd);
-		return file;
+		return PTR_ERR(file);
 	}
 
-	*reserved_fd = fd;
-	return file;
+	id = bpf_link_alloc_id(link);
+	if (id < 0) {
+		put_unused_fd(fd);
+		fput(file);
+		return id;
+	}
+
+	primer->link = link;
+	primer->file = file;
+	primer->fd = fd;
+	primer->id = id;
+	return 0;
+}
+
+int bpf_link_settle(struct bpf_link_primer *primer)
+{
+	/* make bpf_link fetchable by ID */
+	spin_lock_bh(&link_idr_lock);
+	primer->link->id = primer->id;
+	spin_unlock_bh(&link_idr_lock);
+	/* make bpf_link fetchable by FD */
+	fd_install(primer->fd, primer->file);
+	/* pass through installed FD */
+	return primer->fd;
+}
+
+int bpf_link_new_fd(struct bpf_link *link)
+{
+	return anon_inode_getfd("bpf-link", &bpf_link_fops, link, O_CLOEXEC);
 }
 
 struct bpf_link *bpf_link_get_from_fd(u32 ufd)
@@ -2345,6 +2409,7 @@ struct bpf_link *bpf_link_get_from_fd(u32 ufd)
 
 struct bpf_tracing_link {
 	struct bpf_link link;
+	enum bpf_attach_type attach_type;
 };
 
 static void bpf_tracing_link_release(struct bpf_link *link)
@@ -2360,16 +2425,40 @@ static void bpf_tracing_link_dealloc(struct bpf_link *link)
 	kfree(tr_link);
 }
 
+static void bpf_tracing_link_show_fdinfo(const struct bpf_link *link,
+					 struct seq_file *seq)
+{
+	struct bpf_tracing_link *tr_link =
+		container_of(link, struct bpf_tracing_link, link);
+
+	seq_printf(seq,
+		   "attach_type:\t%d\n",
+		   tr_link->attach_type);
+}
+
+static int bpf_tracing_link_fill_link_info(const struct bpf_link *link,
+					   struct bpf_link_info *info)
+{
+	struct bpf_tracing_link *tr_link =
+		container_of(link, struct bpf_tracing_link, link);
+
+	info->tracing.attach_type = tr_link->attach_type;
+
+	return 0;
+}
+
 static const struct bpf_link_ops bpf_tracing_link_lops = {
 	.release = bpf_tracing_link_release,
 	.dealloc = bpf_tracing_link_dealloc,
+	.show_fdinfo = bpf_tracing_link_show_fdinfo,
+	.fill_link_info = bpf_tracing_link_fill_link_info,
 };
 
 static int bpf_tracing_prog_attach(struct bpf_prog *prog)
 {
+	struct bpf_link_primer link_primer;
 	struct bpf_tracing_link *link;
-	struct file *link_file;
-	int link_fd, err;
+	int err;
 
 	switch (prog->type) {
 	case BPF_PROG_TYPE_TRACING:
@@ -2402,24 +2491,23 @@ static int bpf_tracing_prog_attach(struct bpf_prog *prog)
 		err = -ENOMEM;
 		goto out_put_prog;
 	}
-	bpf_link_init(&link->link, &bpf_tracing_link_lops, prog);
+	bpf_link_init(&link->link, BPF_LINK_TYPE_TRACING,
+		      &bpf_tracing_link_lops, prog);
+	link->attach_type = prog->expected_attach_type;
 
-	link_file = bpf_link_new_file(&link->link, &link_fd);
-	if (IS_ERR(link_file)) {
+	err = bpf_link_prime(&link->link, &link_primer);
+	if (err) {
 		kfree(link);
-		err = PTR_ERR(link_file);
 		goto out_put_prog;
 	}
 
 	err = bpf_trampoline_link_prog(prog);
 	if (err) {
-		bpf_link_cleanup(&link->link, link_file, link_fd);
+		bpf_link_cleanup(&link_primer);
 		goto out_put_prog;
 	}
 
-	fd_install(link_fd, link_file);
-	return link_fd;
-
+	return bpf_link_settle(&link_primer);
 out_put_prog:
 	bpf_prog_put(prog);
 	return err;
@@ -2447,22 +2535,69 @@ static void bpf_raw_tp_link_dealloc(struct bpf_link *link)
 	kfree(raw_tp);
 }
 
-static const struct bpf_link_ops bpf_raw_tp_lops = {
+static void bpf_raw_tp_link_show_fdinfo(const struct bpf_link *link,
+					struct seq_file *seq)
+{
+	struct bpf_raw_tp_link *raw_tp_link =
+		container_of(link, struct bpf_raw_tp_link, link);
+
+	seq_printf(seq,
+		   "tp_name:\t%s\n",
+		   raw_tp_link->btp->tp->name);
+}
+
+static int bpf_raw_tp_link_fill_link_info(const struct bpf_link *link,
+					  struct bpf_link_info *info)
+{
+	struct bpf_raw_tp_link *raw_tp_link =
+		container_of(link, struct bpf_raw_tp_link, link);
+	char __user *ubuf = u64_to_user_ptr(info->raw_tracepoint.tp_name);
+	const char *tp_name = raw_tp_link->btp->tp->name;
+	u32 ulen = info->raw_tracepoint.tp_name_len;
+	size_t tp_len = strlen(tp_name);
+
+	if (ulen && !ubuf)
+		return -EINVAL;
+
+	info->raw_tracepoint.tp_name_len = tp_len + 1;
+
+	if (!ubuf)
+		return 0;
+
+	if (ulen >= tp_len + 1) {
+		if (copy_to_user(ubuf, tp_name, tp_len + 1))
+			return -EFAULT;
+	} else {
+		char zero = '\0';
+
+		if (copy_to_user(ubuf, tp_name, ulen - 1))
+			return -EFAULT;
+		if (put_user(zero, ubuf + ulen - 1))
+			return -EFAULT;
+		return -ENOSPC;
+	}
+
+	return 0;
+}
+
+static const struct bpf_link_ops bpf_raw_tp_link_lops = {
 	.release = bpf_raw_tp_link_release,
 	.dealloc = bpf_raw_tp_link_dealloc,
+	.show_fdinfo = bpf_raw_tp_link_show_fdinfo,
+	.fill_link_info = bpf_raw_tp_link_fill_link_info,
 };
 
 #define BPF_RAW_TRACEPOINT_OPEN_LAST_FIELD raw_tracepoint.prog_fd
 
 static int bpf_raw_tracepoint_open(const union bpf_attr *attr)
 {
+	struct bpf_link_primer link_primer;
 	struct bpf_raw_tp_link *link;
 	struct bpf_raw_event_map *btp;
-	struct file *link_file;
 	struct bpf_prog *prog;
 	const char *tp_name;
 	char buf[128];
-	int link_fd, err;
+	int err;
 
 	if (CHECK_ATTR(BPF_RAW_TRACEPOINT_OPEN))
 		return -EINVAL;
@@ -2515,24 +2650,23 @@ static int bpf_raw_tracepoint_open(const union bpf_attr *attr)
 		err = -ENOMEM;
 		goto out_put_btp;
 	}
-	bpf_link_init(&link->link, &bpf_raw_tp_lops, prog);
+	bpf_link_init(&link->link, BPF_LINK_TYPE_RAW_TRACEPOINT,
+		      &bpf_raw_tp_link_lops, prog);
 	link->btp = btp;
 
-	link_file = bpf_link_new_file(&link->link, &link_fd);
-	if (IS_ERR(link_file)) {
+	err = bpf_link_prime(&link->link, &link_primer);
+	if (err) {
 		kfree(link);
-		err = PTR_ERR(link_file);
 		goto out_put_btp;
 	}
 
 	err = bpf_probe_register(link->btp, prog);
 	if (err) {
-		bpf_link_cleanup(&link->link, link_file, link_fd);
+		bpf_link_cleanup(&link_primer);
 		goto out_put_btp;
 	}
 
-	fd_install(link_fd, link_file);
-	return link_fd;
+	return bpf_link_settle(&link_primer);
 
 out_put_btp:
 	bpf_put_raw_tracepoint(btp);
@@ -3313,6 +3447,42 @@ static int bpf_btf_get_info_by_fd(struct btf *btf,
 	return btf_get_info_by_fd(btf, attr, uattr);
 }
 
+static int bpf_link_get_info_by_fd(struct bpf_link *link,
+				  const union bpf_attr *attr,
+				  union bpf_attr __user *uattr)
+{
+	struct bpf_link_info __user *uinfo = u64_to_user_ptr(attr->info.info);
+	struct bpf_link_info info;
+	u32 info_len = attr->info.info_len;
+	int err;
+
+	err = bpf_check_uarg_tail_zero(uinfo, sizeof(info), info_len);
+	if (err)
+		return err;
+	info_len = min_t(u32, sizeof(info), info_len);
+
+	memset(&info, 0, sizeof(info));
+	if (copy_from_user(&info, uinfo, info_len))
+		return -EFAULT;
+
+	info.type = link->type;
+	info.id = link->id;
+	info.prog_id = link->prog->aux->id;
+
+	if (link->ops->fill_link_info) {
+		err = link->ops->fill_link_info(link, &info);
+		if (err)
+			return err;
+	}
+
+	if (copy_to_user(uinfo, &info, info_len) ||
+	    put_user(info_len, &uattr->info.info_len))
+		return -EFAULT;
+
+	return 0;
+}
+
+
 #define BPF_OBJ_GET_INFO_BY_FD_LAST_FIELD info.info
 
 static int bpf_obj_get_info_by_fd(const union bpf_attr *attr,
@@ -3337,6 +3507,9 @@ static int bpf_obj_get_info_by_fd(const union bpf_attr *attr,
 					     uattr);
 	else if (f.file->f_op == &btf_fops)
 		err = bpf_btf_get_info_by_fd(f.file->private_data, attr, uattr);
+	else if (f.file->f_op == &bpf_link_fops)
+		err = bpf_link_get_info_by_fd(f.file->private_data,
+					      attr, uattr);
 	else
 		err = -EINVAL;
 
@@ -3464,7 +3637,7 @@ static int bpf_task_fd_query(const union bpf_attr *attr,
 	if (file->f_op == &bpf_link_fops) {
 		struct bpf_link *link = file->private_data;
 
-		if (link->ops == &bpf_raw_tp_lops) {
+		if (link->ops == &bpf_raw_tp_link_lops) {
 			struct bpf_raw_tp_link *raw_tp =
 				container_of(link, struct bpf_raw_tp_link, link);
 			struct bpf_raw_event_map *btp = raw_tp->btp;
@@ -3645,13 +3818,10 @@ static int link_update(union bpf_attr *attr)
 		goto out_put_progs;
 	}
 
-#ifdef CONFIG_CGROUP_BPF
-	if (link->ops == &bpf_cgroup_link_lops) {
-		ret = cgroup_bpf_replace(link, old_prog, new_prog);
-		goto out_put_progs;
-	}
-#endif
-	ret = -EINVAL;
+	if (link->ops->update_prog)
+		ret = link->ops->update_prog(link, new_prog, old_prog);
+	else
+		ret = EINVAL;
 
 out_put_progs:
 	if (old_prog)
@@ -3663,6 +3833,48 @@ static int link_update(union bpf_attr *attr)
 	return ret;
 }
 
+static int bpf_link_inc_not_zero(struct bpf_link *link)
+{
+	return atomic64_fetch_add_unless(&link->refcnt, 1, 0) ? 0 : -ENOENT;
+}
+
+#define BPF_LINK_GET_FD_BY_ID_LAST_FIELD link_id
+
+static int bpf_link_get_fd_by_id(const union bpf_attr *attr)
+{
+	struct bpf_link *link;
+	u32 id = attr->link_id;
+	int fd, err;
+
+	if (CHECK_ATTR(BPF_LINK_GET_FD_BY_ID))
+		return -EINVAL;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	spin_lock_bh(&link_idr_lock);
+	link = idr_find(&link_idr, id);
+	/* before link is "settled", ID is 0, pretend it doesn't exist yet */
+	if (link) {
+		if (link->id)
+			err = bpf_link_inc_not_zero(link);
+		else
+			err = -EAGAIN;
+	} else {
+		err = -ENOENT;
+	}
+	spin_unlock_bh(&link_idr_lock);
+
+	if (err)
+		return err;
+
+	fd = bpf_link_new_fd(link);
+	if (fd < 0)
+		bpf_link_put(link);
+
+	return fd;
+}
+
 SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, size)
 {
 	union bpf_attr attr;
@@ -3780,6 +3992,13 @@ SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, siz
 	case BPF_LINK_UPDATE:
 		err = link_update(&attr);
 		break;
+	case BPF_LINK_GET_FD_BY_ID:
+		err = bpf_link_get_fd_by_id(&attr);
+		break;
+	case BPF_LINK_GET_NEXT_ID:
+		err = bpf_obj_get_next_id(&attr, uattr,
+					  &link_idr, &link_idr_lock);
+		break;
 	default:
 		err = -EINVAL;
 		break;
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index fa1d8245b925..70ad009577f8 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -28,9 +28,11 @@ static const struct bpf_verifier_ops * const bpf_verifier_ops[] = {
 #define BPF_PROG_TYPE(_id, _name, prog_ctx_type, kern_ctx_type) \
 	[_id] = & _name ## _verifier_ops,
 #define BPF_MAP_TYPE(_id, _ops)
+#define BPF_LINK_TYPE(_id, _name)
 #include <linux/bpf_types.h>
 #undef BPF_PROG_TYPE
 #undef BPF_MAP_TYPE
+#undef BPF_LINK_TYPE
 };
 
 /* bpf_check() is a static code analyzer that walks eBPF program
@@ -168,6 +170,8 @@ struct bpf_verifier_stack_elem {
 	int insn_idx;
 	int prev_insn_idx;
 	struct bpf_verifier_stack_elem *next;
+	/* length of verifier log at the time this state was pushed on stack */
+	u32 log_pos;
 };
 
 #define BPF_COMPLEXITY_LIMIT_JMP_SEQ	8192
@@ -283,6 +287,18 @@ void bpf_verifier_vlog(struct bpf_verifier_log *log, const char *fmt,
 		log->ubuf = NULL;
 }
 
+static void bpf_vlog_reset(struct bpf_verifier_log *log, u32 new_pos)
+{
+	char zero = 0;
+
+	if (!bpf_verifier_log_needed(log))
+		return;
+
+	log->len_used = new_pos;
+	if (put_user(zero, log->ubuf + new_pos))
+		log->ubuf = NULL;
+}
+
 /* log_level controls verbosity level of eBPF verifier.
  * bpf_verifier_log_write() is used to dump the verification trace to the log,
  * so the user can figure out what's wrong with the program
@@ -413,11 +429,30 @@ static bool is_release_function(enum bpf_func_id func_id)
 	return func_id == BPF_FUNC_sk_release;
 }
 
-static bool is_acquire_function(enum bpf_func_id func_id)
+static bool may_be_acquire_function(enum bpf_func_id func_id)
 {
 	return func_id == BPF_FUNC_sk_lookup_tcp ||
 		func_id == BPF_FUNC_sk_lookup_udp ||
-		func_id == BPF_FUNC_skc_lookup_tcp;
+		func_id == BPF_FUNC_skc_lookup_tcp ||
+		func_id == BPF_FUNC_map_lookup_elem;
+}
+
+static bool is_acquire_function(enum bpf_func_id func_id,
+				const struct bpf_map *map)
+{
+	enum bpf_map_type map_type = map ? map->map_type : BPF_MAP_TYPE_UNSPEC;
+
+	if (func_id == BPF_FUNC_sk_lookup_tcp ||
+	    func_id == BPF_FUNC_sk_lookup_udp ||
+	    func_id == BPF_FUNC_skc_lookup_tcp)
+		return true;
+
+	if (func_id == BPF_FUNC_map_lookup_elem &&
+	    (map_type == BPF_MAP_TYPE_SOCKMAP ||
+	     map_type == BPF_MAP_TYPE_SOCKHASH))
+		return true;
+
+	return false;
 }
 
 static bool is_ptr_cast_function(enum bpf_func_id func_id)
@@ -846,7 +881,7 @@ static void update_branch_counts(struct bpf_verifier_env *env, struct bpf_verifi
 }
 
 static int pop_stack(struct bpf_verifier_env *env, int *prev_insn_idx,
-		     int *insn_idx)
+		     int *insn_idx, bool pop_log)
 {
 	struct bpf_verifier_state *cur = env->cur_state;
 	struct bpf_verifier_stack_elem *elem, *head = env->head;
@@ -860,6 +895,8 @@ static int pop_stack(struct bpf_verifier_env *env, int *prev_insn_idx,
 		if (err)
 			return err;
 	}
+	if (pop_log)
+		bpf_vlog_reset(&env->log, head->log_pos);
 	if (insn_idx)
 		*insn_idx = head->insn_idx;
 	if (prev_insn_idx)
@@ -887,6 +924,7 @@ static struct bpf_verifier_state *push_stack(struct bpf_verifier_env *env,
 	elem->insn_idx = insn_idx;
 	elem->prev_insn_idx = prev_insn_idx;
 	elem->next = env->head;
+	elem->log_pos = env->log.len_used;
 	env->head = elem;
 	env->stack_size++;
 	err = copy_verifier_state(&elem->st, cur);
@@ -915,7 +953,7 @@ static struct bpf_verifier_state *push_stack(struct bpf_verifier_env *env,
 	free_verifier_state(env->cur_state, true);
 	env->cur_state = NULL;
 	/* pop all elements and return */
-	while (!pop_stack(env, NULL, NULL));
+	while (!pop_stack(env, NULL, NULL, false));
 	return NULL;
 }
 
@@ -3915,7 +3953,8 @@ static int check_map_func_compatibility(struct bpf_verifier_env *env,
 		    func_id != BPF_FUNC_sock_map_update &&
 		    func_id != BPF_FUNC_map_delete_elem &&
 		    func_id != BPF_FUNC_msg_redirect_map &&
-		    func_id != BPF_FUNC_sk_select_reuseport)
+		    func_id != BPF_FUNC_sk_select_reuseport &&
+		    func_id != BPF_FUNC_map_lookup_elem)
 			goto error;
 		break;
 	case BPF_MAP_TYPE_SOCKHASH:
@@ -3923,7 +3962,8 @@ static int check_map_func_compatibility(struct bpf_verifier_env *env,
 		    func_id != BPF_FUNC_sock_hash_update &&
 		    func_id != BPF_FUNC_map_delete_elem &&
 		    func_id != BPF_FUNC_msg_redirect_hash &&
-		    func_id != BPF_FUNC_sk_select_reuseport)
+		    func_id != BPF_FUNC_sk_select_reuseport &&
+		    func_id != BPF_FUNC_map_lookup_elem)
 			goto error;
 		break;
 	case BPF_MAP_TYPE_REUSEPORT_SOCKARRAY:
@@ -4093,7 +4133,7 @@ static bool check_refcount_ok(const struct bpf_func_proto *fn, int func_id)
 	/* A reference acquiring function cannot acquire
 	 * another refcounted ptr.
 	 */
-	if (is_acquire_function(func_id) && count)
+	if (may_be_acquire_function(func_id) && count)
 		return false;
 
 	/* We only support one arg being unreferenced at the moment,
@@ -4604,7 +4644,7 @@ static int check_helper_call(struct bpf_verifier_env *env, int func_id, int insn
 	if (is_ptr_cast_function(func_id)) {
 		/* For release_reference() */
 		regs[BPF_REG_0].ref_obj_id = meta.ref_obj_id;
-	} else if (is_acquire_function(func_id)) {
+	} else if (is_acquire_function(func_id, meta.map_ptr)) {
 		int id = acquire_reference_state(env, insn_idx);
 
 		if (id < 0)
@@ -5609,7 +5649,7 @@ static int adjust_scalar_min_max_vals(struct bpf_verifier_env *env,
 {
 	struct bpf_reg_state *regs = cur_regs(env);
 	u8 opcode = BPF_OP(insn->code);
-	bool src_known, dst_known;
+	bool src_known;
 	s64 smin_val, smax_val;
 	u64 umin_val, umax_val;
 	s32 s32_min_val, s32_max_val;
@@ -5631,7 +5671,6 @@ static int adjust_scalar_min_max_vals(struct bpf_verifier_env *env,
 
 	if (alu32) {
 		src_known = tnum_subreg_is_const(src_reg.var_off);
-		dst_known = tnum_subreg_is_const(dst_reg->var_off);
 		if ((src_known &&
 		     (s32_min_val != s32_max_val || u32_min_val != u32_max_val)) ||
 		    s32_min_val > s32_max_val || u32_min_val > u32_max_val) {
@@ -5643,7 +5682,6 @@ static int adjust_scalar_min_max_vals(struct bpf_verifier_env *env,
 		}
 	} else {
 		src_known = tnum_is_const(src_reg.var_off);
-		dst_known = tnum_is_const(dst_reg->var_off);
 		if ((src_known &&
 		     (smin_val != smax_val || umin_val != umax_val)) ||
 		    smin_val > smax_val || umin_val > umax_val) {
@@ -6515,12 +6553,16 @@ static void mark_ptr_or_null_reg(struct bpf_func_state *state,
 		if (is_null) {
 			reg->type = SCALAR_VALUE;
 		} else if (reg->type == PTR_TO_MAP_VALUE_OR_NULL) {
-			if (reg->map_ptr->inner_map_meta) {
+			const struct bpf_map *map = reg->map_ptr;
+
+			if (map->inner_map_meta) {
 				reg->type = CONST_PTR_TO_MAP;
-				reg->map_ptr = reg->map_ptr->inner_map_meta;
-			} else if (reg->map_ptr->map_type ==
-				   BPF_MAP_TYPE_XSKMAP) {
+				reg->map_ptr = map->inner_map_meta;
+			} else if (map->map_type == BPF_MAP_TYPE_XSKMAP) {
 				reg->type = PTR_TO_XDP_SOCK;
+			} else if (map->map_type == BPF_MAP_TYPE_SOCKMAP ||
+				   map->map_type == BPF_MAP_TYPE_SOCKHASH) {
+				reg->type = PTR_TO_SOCKET;
 			} else {
 				reg->type = PTR_TO_MAP_VALUE;
 			}
@@ -8409,6 +8451,7 @@ static bool reg_type_mismatch(enum bpf_reg_type src, enum bpf_reg_type prev)
 
 static int do_check(struct bpf_verifier_env *env)
 {
+	bool pop_log = !(env->log.level & BPF_LOG_LEVEL2);
 	struct bpf_verifier_state *state = env->cur_state;
 	struct bpf_insn *insns = env->prog->insnsi;
 	struct bpf_reg_state *regs;
@@ -8685,7 +8728,7 @@ static int do_check(struct bpf_verifier_env *env)
 process_bpf_exit:
 				update_branch_counts(env, env->cur_state);
 				err = pop_stack(env, &prev_insn_idx,
-						&env->insn_idx);
+						&env->insn_idx, pop_log);
 				if (err < 0) {
 					if (err != -ENOENT)
 						return err;
@@ -10208,6 +10251,7 @@ static void sanitize_insn_aux_data(struct bpf_verifier_env *env)
 
 static int do_check_common(struct bpf_verifier_env *env, int subprog)
 {
+	bool pop_log = !(env->log.level & BPF_LOG_LEVEL2);
 	struct bpf_verifier_state *state;
 	struct bpf_reg_state *regs;
 	int ret, i;
@@ -10270,7 +10314,9 @@ static int do_check_common(struct bpf_verifier_env *env, int subprog)
 		free_verifier_state(env->cur_state, true);
 		env->cur_state = NULL;
 	}
-	while (!pop_stack(env, NULL, NULL));
+	while (!pop_stack(env, NULL, NULL, false));
+	if (!ret && pop_log)
+		bpf_vlog_reset(&env->log, 0);
 	free_states(env);
 	if (ret)
 		/* clean aux data in case subprog was rejected */
diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
index 06b5ea9d899d..557a9b9d2244 100644
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -6508,33 +6508,6 @@ int cgroup_bpf_attach(struct cgroup *cgrp,
 	return ret;
 }
 
-int cgroup_bpf_replace(struct bpf_link *link, struct bpf_prog *old_prog,
-		       struct bpf_prog *new_prog)
-{
-	struct bpf_cgroup_link *cg_link;
-	int ret;
-
-	if (link->ops != &bpf_cgroup_link_lops)
-		return -EINVAL;
-
-	cg_link = container_of(link, struct bpf_cgroup_link, link);
-
-	mutex_lock(&cgroup_mutex);
-	/* link might have been auto-released by dying cgroup, so fail */
-	if (!cg_link->cgroup) {
-		ret = -EINVAL;
-		goto out_unlock;
-	}
-	if (old_prog && link->prog != old_prog) {
-		ret = -EPERM;
-		goto out_unlock;
-	}
-	ret = __cgroup_bpf_replace(cg_link->cgroup, cg_link, new_prog);
-out_unlock:
-	mutex_unlock(&cgroup_mutex);
-	return ret;
-}
-
 int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,
 		      enum bpf_attach_type type)
 {
diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c
index 6f87352f8219..41ca996568df 100644
--- a/kernel/cgroup/rstat.c
+++ b/kernel/cgroup/rstat.c
@@ -33,12 +33,9 @@ void cgroup_rstat_updated(struct cgroup *cgrp, int cpu)
 		return;
 
 	/*
-	 * Paired with the one in cgroup_rstat_cpu_pop_updated().  Either we
-	 * see NULL updated_next or they see our updated stat.
-	 */
-	smp_mb();
-
-	/*
+	 * Speculative already-on-list test. This may race leading to
+	 * temporary inaccuracies, which is fine.
+	 *
 	 * Because @parent's updated_children is terminated with @parent
 	 * instead of NULL, we can tell whether @cgrp is on the list by
 	 * testing the next pointer for NULL.
@@ -134,13 +131,6 @@ static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos,
 		*nextp = rstatc->updated_next;
 		rstatc->updated_next = NULL;
 
-		/*
-		 * Paired with the one in cgroup_rstat_cpu_updated().
-		 * Either they see NULL updated_next or we see their
-		 * updated stat.
-		 */
-		smp_mb();
-
 		return pos;
 	}
 
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 2371292f30b0..6a02d4434cf7 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -432,7 +432,7 @@ static inline bool cpu_smt_allowed(unsigned int cpu)
 	/*
 	 * On x86 it's required to boot all logical CPUs at least once so
 	 * that the init code can get a chance to set CR4.MCE on each
-	 * CPU. Otherwise, a broadacasted MCE observing CR4.MCE=0b on any
+	 * CPU. Otherwise, a broadcasted MCE observing CR4.MCE=0b on any
 	 * core will shutdown the machine.
 	 */
 	return !cpumask_test_cpu(cpu, &cpus_booted_once_mask);
diff --git a/kernel/crash_dump.c b/kernel/crash_dump.c
index 9c23ae074b40..92da32275af5 100644
--- a/kernel/crash_dump.c
+++ b/kernel/crash_dump.c
@@ -5,12 +5,6 @@
 #include <linux/errno.h>
 #include <linux/export.h>
 
-/*
- * If we have booted due to a crash, max_pfn will be a very low value. We need
- * to know the amount of memory that the previous kernel used.
- */
-unsigned long saved_max_pfn;
-
 /*
  * stores the physical address of elf header of crash image
  *
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 2b7c9b67931d..01bc3eea3d4d 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -417,6 +417,18 @@ int kgdb_isremovedbreak(unsigned long addr)
 	return 0;
 }
 
+int kgdb_has_hit_break(unsigned long addr)
+{
+	int i;
+
+	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+		if (kgdb_break[i].state == BP_ACTIVE &&
+		    kgdb_break[i].bpt_addr == addr)
+			return 1;
+	}
+	return 0;
+}
+
 int dbg_remove_all_break(void)
 {
 	int error;
diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c
index 3de0cc780c16..18e03aba2cfc 100644
--- a/kernel/debug/kdb/kdb_bt.c
+++ b/kernel/debug/kdb/kdb_bt.c
@@ -21,17 +21,18 @@
 
 static void kdb_show_stack(struct task_struct *p, void *addr)
 {
-	int old_lvl = console_loglevel;
-
-	console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH;
 	kdb_trap_printk++;
 
-	if (!addr && kdb_task_has_cpu(p))
+	if (!addr && kdb_task_has_cpu(p)) {
+		int old_lvl = console_loglevel;
+
+		console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH;
 		kdb_dump_stack_on_cpu(kdb_process_cpu(p));
-	else
-		show_stack(p, addr);
+		console_loglevel = old_lvl;
+	} else {
+		show_stack(p, addr, KERN_EMERG);
+	}
 
-	console_loglevel = old_lvl;
 	kdb_trap_printk--;
 }
 
diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig
index 4c103a24e380..d006668c0027 100644
--- a/kernel/dma/Kconfig
+++ b/kernel/dma/Kconfig
@@ -79,10 +79,14 @@ config DMA_REMAP
 	select DMA_NONCOHERENT_MMAP
 	bool
 
-config DMA_DIRECT_REMAP
+config DMA_COHERENT_POOL
 	bool
 	select DMA_REMAP
 
+config DMA_DIRECT_REMAP
+	bool
+	select DMA_COHERENT_POOL
+
 config DMA_CMA
 	bool "DMA Contiguous Memory Allocator"
 	depends on HAVE_DMA_CONTIGUOUS && CMA
diff --git a/kernel/dma/Makefile b/kernel/dma/Makefile
index d237cf3dc181..370f63344e9c 100644
--- a/kernel/dma/Makefile
+++ b/kernel/dma/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_DMA_DECLARE_COHERENT)	+= coherent.o
 obj-$(CONFIG_DMA_VIRT_OPS)		+= virt.o
 obj-$(CONFIG_DMA_API_DEBUG)		+= debug.o
 obj-$(CONFIG_SWIOTLB)			+= swiotlb.o
+obj-$(CONFIG_DMA_COHERENT_POOL)		+= pool.o
 obj-$(CONFIG_DMA_REMAP)			+= remap.o
diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c
index 8bc6f2d670f9..15bc5026c485 100644
--- a/kernel/dma/contiguous.c
+++ b/kernel/dma/contiguous.c
@@ -222,8 +222,8 @@ bool dma_release_from_contiguous(struct device *dev, struct page *pages,
  * @gfp:   Allocation flags.
  *
  * This function allocates contiguous memory buffer for specified device. It
- * first tries to use device specific contiguous memory area if available or
- * the default global one, then tries a fallback allocation of normal pages.
+ * tries to use device specific contiguous memory area if available, or the
+ * default global one.
  *
  * Note that it byapss one-page size of allocations from the global area as
  * the addresses within one page are always contiguous, so there is no need
diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index 9e1777c81f55..36c962a86bf2 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -656,7 +656,7 @@ static struct dma_debug_entry *__dma_entry_alloc(void)
 	return entry;
 }
 
-void __dma_entry_alloc_check_leak(void)
+static void __dma_entry_alloc_check_leak(void)
 {
 	u32 tmp = nr_total_entries % nr_prealloc_entries;
 
diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 8f4bbdaf965e..0a4881e59aa7 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -45,8 +45,8 @@ u64 dma_direct_get_required_mask(struct device *dev)
 	return (1ULL << (fls64(max_dma) - 1)) * 2 - 1;
 }
 
-static gfp_t __dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
-		u64 *phys_limit)
+gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
+				  u64 *phys_limit)
 {
 	u64 dma_limit = min_not_zero(dma_mask, dev->bus_dma_limit);
 
@@ -76,6 +76,39 @@ static bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size)
 			min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit);
 }
 
+/*
+ * Decrypting memory is allowed to block, so if this device requires
+ * unencrypted memory it must come from atomic pools.
+ */
+static inline bool dma_should_alloc_from_pool(struct device *dev, gfp_t gfp,
+					      unsigned long attrs)
+{
+	if (!IS_ENABLED(CONFIG_DMA_COHERENT_POOL))
+		return false;
+	if (gfpflags_allow_blocking(gfp))
+		return false;
+	if (force_dma_unencrypted(dev))
+		return true;
+	if (!IS_ENABLED(CONFIG_DMA_DIRECT_REMAP))
+		return false;
+	if (dma_alloc_need_uncached(dev, attrs))
+		return true;
+	return false;
+}
+
+static inline bool dma_should_free_from_pool(struct device *dev,
+					     unsigned long attrs)
+{
+	if (IS_ENABLED(CONFIG_DMA_COHERENT_POOL))
+		return true;
+	if ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) &&
+	    !force_dma_unencrypted(dev))
+		return false;
+	if (IS_ENABLED(CONFIG_DMA_DIRECT_REMAP))
+		return true;
+	return false;
+}
+
 struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
 		gfp_t gfp, unsigned long attrs)
 {
@@ -89,8 +122,8 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
 
 	/* we always manually zero the memory once we are done: */
 	gfp &= ~__GFP_ZERO;
-	gfp |= __dma_direct_optimal_gfp_mask(dev, dev->coherent_dma_mask,
-			&phys_limit);
+	gfp |= dma_direct_optimal_gfp_mask(dev, dev->coherent_dma_mask,
+					   &phys_limit);
 	page = dma_alloc_contiguous(dev, alloc_size, gfp);
 	if (page && !dma_coherent_ok(dev, page_to_phys(page), size)) {
 		dma_free_contiguous(dev, page, alloc_size);
@@ -125,10 +158,8 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size,
 	struct page *page;
 	void *ret;
 
-	if (IS_ENABLED(CONFIG_DMA_DIRECT_REMAP) &&
-	    dma_alloc_need_uncached(dev, attrs) &&
-	    !gfpflags_allow_blocking(gfp)) {
-		ret = dma_alloc_from_pool(PAGE_ALIGN(size), &page, gfp);
+	if (dma_should_alloc_from_pool(dev, gfp, attrs)) {
+		ret = dma_alloc_from_pool(dev, PAGE_ALIGN(size), &page, gfp);
 		if (!ret)
 			return NULL;
 		goto done;
@@ -204,6 +235,11 @@ void dma_direct_free_pages(struct device *dev, size_t size, void *cpu_addr,
 {
 	unsigned int page_order = get_order(size);
 
+	/* If cpu_addr is not from an atomic pool, dma_free_from_pool() fails */
+	if (dma_should_free_from_pool(dev, attrs) &&
+	    dma_free_from_pool(dev, cpu_addr, PAGE_ALIGN(size)))
+		return;
+
 	if ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) &&
 	    !force_dma_unencrypted(dev)) {
 		/* cpu_addr is a struct page cookie, not a kernel address */
@@ -211,10 +247,6 @@ void dma_direct_free_pages(struct device *dev, size_t size, void *cpu_addr,
 		return;
 	}
 
-	if (IS_ENABLED(CONFIG_DMA_DIRECT_REMAP) &&
-	    dma_free_from_pool(cpu_addr, PAGE_ALIGN(size)))
-		return;
-
 	if (force_dma_unencrypted(dev))
 		set_memory_encrypted((unsigned long)cpu_addr, 1 << page_order);
 
diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c
new file mode 100644
index 000000000000..35bb51c31fff
--- /dev/null
+++ b/kernel/dma/pool.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Copyright (C) 2020 Google LLC
+ */
+#include <linux/debugfs.h>
+#include <linux/dma-direct.h>
+#include <linux/dma-noncoherent.h>
+#include <linux/dma-contiguous.h>
+#include <linux/init.h>
+#include <linux/genalloc.h>
+#include <linux/set_memory.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+static struct gen_pool *atomic_pool_dma __ro_after_init;
+static unsigned long pool_size_dma;
+static struct gen_pool *atomic_pool_dma32 __ro_after_init;
+static unsigned long pool_size_dma32;
+static struct gen_pool *atomic_pool_kernel __ro_after_init;
+static unsigned long pool_size_kernel;
+
+/* Size can be defined by the coherent_pool command line */
+static size_t atomic_pool_size;
+
+/* Dynamic background expansion when the atomic pool is near capacity */
+static struct work_struct atomic_pool_work;
+
+static int __init early_coherent_pool(char *p)
+{
+	atomic_pool_size = memparse(p, &p);
+	return 0;
+}
+early_param("coherent_pool", early_coherent_pool);
+
+static void __init dma_atomic_pool_debugfs_init(void)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir("dma_pools", NULL);
+	if (IS_ERR_OR_NULL(root))
+		return;
+
+	debugfs_create_ulong("pool_size_dma", 0400, root, &pool_size_dma);
+	debugfs_create_ulong("pool_size_dma32", 0400, root, &pool_size_dma32);
+	debugfs_create_ulong("pool_size_kernel", 0400, root, &pool_size_kernel);
+}
+
+static void dma_atomic_pool_size_add(gfp_t gfp, size_t size)
+{
+	if (gfp & __GFP_DMA)
+		pool_size_dma += size;
+	else if (gfp & __GFP_DMA32)
+		pool_size_dma32 += size;
+	else
+		pool_size_kernel += size;
+}
+
+static int atomic_pool_expand(struct gen_pool *pool, size_t pool_size,
+			      gfp_t gfp)
+{
+	unsigned int order;
+	struct page *page;
+	void *addr;
+	int ret = -ENOMEM;
+
+	/* Cannot allocate larger than MAX_ORDER-1 */
+	order = min(get_order(pool_size), MAX_ORDER-1);
+
+	do {
+		pool_size = 1 << (PAGE_SHIFT + order);
+
+		if (dev_get_cma_area(NULL))
+			page = dma_alloc_from_contiguous(NULL, 1 << order,
+							 order, false);
+		else
+			page = alloc_pages(gfp, order);
+	} while (!page && order-- > 0);
+	if (!page)
+		goto out;
+
+	arch_dma_prep_coherent(page, pool_size);
+
+#ifdef CONFIG_DMA_DIRECT_REMAP
+	addr = dma_common_contiguous_remap(page, pool_size,
+					   pgprot_dmacoherent(PAGE_KERNEL),
+					   __builtin_return_address(0));
+	if (!addr)
+		goto free_page;
+#else
+	addr = page_to_virt(page);
+#endif
+	/*
+	 * Memory in the atomic DMA pools must be unencrypted, the pools do not
+	 * shrink so no re-encryption occurs in dma_direct_free_pages().
+	 */
+	ret = set_memory_decrypted((unsigned long)page_to_virt(page),
+				   1 << order);
+	if (ret)
+		goto remove_mapping;
+	ret = gen_pool_add_virt(pool, (unsigned long)addr, page_to_phys(page),
+				pool_size, NUMA_NO_NODE);
+	if (ret)
+		goto encrypt_mapping;
+
+	dma_atomic_pool_size_add(gfp, pool_size);
+	return 0;
+
+encrypt_mapping:
+	ret = set_memory_encrypted((unsigned long)page_to_virt(page),
+				   1 << order);
+	if (WARN_ON_ONCE(ret)) {
+		/* Decrypt succeeded but encrypt failed, purposely leak */
+		goto out;
+	}
+remove_mapping:
+#ifdef CONFIG_DMA_DIRECT_REMAP
+	dma_common_free_remap(addr, pool_size);
+#endif
+free_page: __maybe_unused
+	if (!dma_release_from_contiguous(NULL, page, 1 << order))
+		__free_pages(page, order);
+out:
+	return ret;
+}
+
+static void atomic_pool_resize(struct gen_pool *pool, gfp_t gfp)
+{
+	if (pool && gen_pool_avail(pool) < atomic_pool_size)
+		atomic_pool_expand(pool, gen_pool_size(pool), gfp);
+}
+
+static void atomic_pool_work_fn(struct work_struct *work)
+{
+	if (IS_ENABLED(CONFIG_ZONE_DMA))
+		atomic_pool_resize(atomic_pool_dma,
+				   GFP_KERNEL | GFP_DMA);
+	if (IS_ENABLED(CONFIG_ZONE_DMA32))
+		atomic_pool_resize(atomic_pool_dma32,
+				   GFP_KERNEL | GFP_DMA32);
+	atomic_pool_resize(atomic_pool_kernel, GFP_KERNEL);
+}
+
+static __init struct gen_pool *__dma_atomic_pool_init(size_t pool_size,
+						      gfp_t gfp)
+{
+	struct gen_pool *pool;
+	int ret;
+
+	pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
+	if (!pool)
+		return NULL;
+
+	gen_pool_set_algo(pool, gen_pool_first_fit_order_align, NULL);
+
+	ret = atomic_pool_expand(pool, pool_size, gfp);
+	if (ret) {
+		gen_pool_destroy(pool);
+		pr_err("DMA: failed to allocate %zu KiB %pGg pool for atomic allocation\n",
+		       pool_size >> 10, &gfp);
+		return NULL;
+	}
+
+	pr_info("DMA: preallocated %zu KiB %pGg pool for atomic allocations\n",
+		gen_pool_size(pool) >> 10, &gfp);
+	return pool;
+}
+
+static int __init dma_atomic_pool_init(void)
+{
+	int ret = 0;
+
+	/*
+	 * If coherent_pool was not used on the command line, default the pool
+	 * sizes to 128KB per 1GB of memory, min 128KB, max MAX_ORDER-1.
+	 */
+	if (!atomic_pool_size) {
+		atomic_pool_size = max(totalram_pages() >> PAGE_SHIFT, 1UL) *
+					SZ_128K;
+		atomic_pool_size = min_t(size_t, atomic_pool_size,
+					 1 << (PAGE_SHIFT + MAX_ORDER-1));
+	}
+	INIT_WORK(&atomic_pool_work, atomic_pool_work_fn);
+
+	atomic_pool_kernel = __dma_atomic_pool_init(atomic_pool_size,
+						    GFP_KERNEL);
+	if (!atomic_pool_kernel)
+		ret = -ENOMEM;
+	if (IS_ENABLED(CONFIG_ZONE_DMA)) {
+		atomic_pool_dma = __dma_atomic_pool_init(atomic_pool_size,
+						GFP_KERNEL | GFP_DMA);
+		if (!atomic_pool_dma)
+			ret = -ENOMEM;
+	}
+	if (IS_ENABLED(CONFIG_ZONE_DMA32)) {
+		atomic_pool_dma32 = __dma_atomic_pool_init(atomic_pool_size,
+						GFP_KERNEL | GFP_DMA32);
+		if (!atomic_pool_dma32)
+			ret = -ENOMEM;
+	}
+
+	dma_atomic_pool_debugfs_init();
+	return ret;
+}
+postcore_initcall(dma_atomic_pool_init);
+
+static inline struct gen_pool *dev_to_pool(struct device *dev)
+{
+	u64 phys_mask;
+	gfp_t gfp;
+
+	gfp = dma_direct_optimal_gfp_mask(dev, dev->coherent_dma_mask,
+					  &phys_mask);
+	if (IS_ENABLED(CONFIG_ZONE_DMA) && gfp == GFP_DMA)
+		return atomic_pool_dma;
+	if (IS_ENABLED(CONFIG_ZONE_DMA32) && gfp == GFP_DMA32)
+		return atomic_pool_dma32;
+	return atomic_pool_kernel;
+}
+
+static bool dma_in_atomic_pool(struct device *dev, void *start, size_t size)
+{
+	struct gen_pool *pool = dev_to_pool(dev);
+
+	if (unlikely(!pool))
+		return false;
+	return gen_pool_has_addr(pool, (unsigned long)start, size);
+}
+
+void *dma_alloc_from_pool(struct device *dev, size_t size,
+			  struct page **ret_page, gfp_t flags)
+{
+	struct gen_pool *pool = dev_to_pool(dev);
+	unsigned long val;
+	void *ptr = NULL;
+
+	if (!pool) {
+		WARN(1, "%pGg atomic pool not initialised!\n", &flags);
+		return NULL;
+	}
+
+	val = gen_pool_alloc(pool, size);
+	if (val) {
+		phys_addr_t phys = gen_pool_virt_to_phys(pool, val);
+
+		*ret_page = pfn_to_page(__phys_to_pfn(phys));
+		ptr = (void *)val;
+		memset(ptr, 0, size);
+	}
+	if (gen_pool_avail(pool) < atomic_pool_size)
+		schedule_work(&atomic_pool_work);
+
+	return ptr;
+}
+
+bool dma_free_from_pool(struct device *dev, void *start, size_t size)
+{
+	struct gen_pool *pool = dev_to_pool(dev);
+
+	if (!dma_in_atomic_pool(dev, start, size))
+		return false;
+	gen_pool_free(pool, (unsigned long)start, size);
+	return true;
+}
diff --git a/kernel/dma/remap.c b/kernel/dma/remap.c
index d14cbc83986a..e739a6eea6e7 100644
--- a/kernel/dma/remap.c
+++ b/kernel/dma/remap.c
@@ -1,13 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2012 ARM Ltd.
  * Copyright (c) 2014 The Linux Foundation
  */
-#include <linux/dma-direct.h>
-#include <linux/dma-noncoherent.h>
-#include <linux/dma-contiguous.h>
-#include <linux/init.h>
-#include <linux/genalloc.h>
+#include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 
@@ -20,23 +15,6 @@ struct page **dma_common_find_pages(void *cpu_addr)
 	return area->pages;
 }
 
-static struct vm_struct *__dma_common_pages_remap(struct page **pages,
-			size_t size, pgprot_t prot, const void *caller)
-{
-	struct vm_struct *area;
-
-	area = get_vm_area_caller(size, VM_DMA_COHERENT, caller);
-	if (!area)
-		return NULL;
-
-	if (map_vm_area(area, prot, pages)) {
-		vunmap(area->addr);
-		return NULL;
-	}
-
-	return area;
-}
-
 /*
  * Remaps an array of PAGE_SIZE pages into another vm_area.
  * Cannot be used in non-sleeping contexts
@@ -44,15 +22,12 @@ static struct vm_struct *__dma_common_pages_remap(struct page **pages,
 void *dma_common_pages_remap(struct page **pages, size_t size,
 			 pgprot_t prot, const void *caller)
 {
-	struct vm_struct *area;
-
-	area = __dma_common_pages_remap(pages, size, prot, caller);
-	if (!area)
-		return NULL;
+	void *vaddr;
 
-	area->pages = pages;
-
-	return area->addr;
+	vaddr = vmap(pages, size >> PAGE_SHIFT, VM_DMA_COHERENT, prot);
+	if (vaddr)
+		find_vm_area(vaddr)->pages = pages;
+	return vaddr;
 }
 
 /*
@@ -62,24 +37,20 @@ void *dma_common_pages_remap(struct page **pages, size_t size,
 void *dma_common_contiguous_remap(struct page *page, size_t size,
 			pgprot_t prot, const void *caller)
 {
-	int i;
+	int count = size >> PAGE_SHIFT;
 	struct page **pages;
-	struct vm_struct *area;
+	void *vaddr;
+	int i;
 
-	pages = kmalloc(sizeof(struct page *) << get_order(size), GFP_KERNEL);
+	pages = kmalloc_array(count, sizeof(struct page *), GFP_KERNEL);
 	if (!pages)
 		return NULL;
-
-	for (i = 0; i < (size >> PAGE_SHIFT); i++)
+	for (i = 0; i < count; i++)
 		pages[i] = nth_page(page, i);
-
-	area = __dma_common_pages_remap(pages, size, prot, caller);
-
+	vaddr = vmap(pages, count, VM_DMA_COHERENT, prot);
 	kfree(pages);
 
-	if (!area)
-		return NULL;
-	return area->addr;
+	return vaddr;
 }
 
 /*
@@ -97,117 +68,3 @@ void dma_common_free_remap(void *cpu_addr, size_t size)
 	unmap_kernel_range((unsigned long)cpu_addr, PAGE_ALIGN(size));
 	vunmap(cpu_addr);
 }
-
-#ifdef CONFIG_DMA_DIRECT_REMAP
-static struct gen_pool *atomic_pool __ro_after_init;
-
-#define DEFAULT_DMA_COHERENT_POOL_SIZE  SZ_256K
-static size_t atomic_pool_size __initdata = DEFAULT_DMA_COHERENT_POOL_SIZE;
-
-static int __init early_coherent_pool(char *p)
-{
-	atomic_pool_size = memparse(p, &p);
-	return 0;
-}
-early_param("coherent_pool", early_coherent_pool);
-
-static gfp_t dma_atomic_pool_gfp(void)
-{
-	if (IS_ENABLED(CONFIG_ZONE_DMA))
-		return GFP_DMA;
-	if (IS_ENABLED(CONFIG_ZONE_DMA32))
-		return GFP_DMA32;
-	return GFP_KERNEL;
-}
-
-static int __init dma_atomic_pool_init(void)
-{
-	unsigned int pool_size_order = get_order(atomic_pool_size);
-	unsigned long nr_pages = atomic_pool_size >> PAGE_SHIFT;
-	struct page *page;
-	void *addr;
-	int ret;
-
-	if (dev_get_cma_area(NULL))
-		page = dma_alloc_from_contiguous(NULL, nr_pages,
-						 pool_size_order, false);
-	else
-		page = alloc_pages(dma_atomic_pool_gfp(), pool_size_order);
-	if (!page)
-		goto out;
-
-	arch_dma_prep_coherent(page, atomic_pool_size);
-
-	atomic_pool = gen_pool_create(PAGE_SHIFT, -1);
-	if (!atomic_pool)
-		goto free_page;
-
-	addr = dma_common_contiguous_remap(page, atomic_pool_size,
-					   pgprot_dmacoherent(PAGE_KERNEL),
-					   __builtin_return_address(0));
-	if (!addr)
-		goto destroy_genpool;
-
-	ret = gen_pool_add_virt(atomic_pool, (unsigned long)addr,
-				page_to_phys(page), atomic_pool_size, -1);
-	if (ret)
-		goto remove_mapping;
-	gen_pool_set_algo(atomic_pool, gen_pool_first_fit_order_align, NULL);
-
-	pr_info("DMA: preallocated %zu KiB pool for atomic allocations\n",
-		atomic_pool_size / 1024);
-	return 0;
-
-remove_mapping:
-	dma_common_free_remap(addr, atomic_pool_size);
-destroy_genpool:
-	gen_pool_destroy(atomic_pool);
-	atomic_pool = NULL;
-free_page:
-	if (!dma_release_from_contiguous(NULL, page, nr_pages))
-		__free_pages(page, pool_size_order);
-out:
-	pr_err("DMA: failed to allocate %zu KiB pool for atomic coherent allocation\n",
-		atomic_pool_size / 1024);
-	return -ENOMEM;
-}
-postcore_initcall(dma_atomic_pool_init);
-
-bool dma_in_atomic_pool(void *start, size_t size)
-{
-	if (unlikely(!atomic_pool))
-		return false;
-
-	return gen_pool_has_addr(atomic_pool, (unsigned long)start, size);
-}
-
-void *dma_alloc_from_pool(size_t size, struct page **ret_page, gfp_t flags)
-{
-	unsigned long val;
-	void *ptr = NULL;
-
-	if (!atomic_pool) {
-		WARN(1, "coherent pool not initialised!\n");
-		return NULL;
-	}
-
-	val = gen_pool_alloc(atomic_pool, size);
-	if (val) {
-		phys_addr_t phys = gen_pool_virt_to_phys(atomic_pool, val);
-
-		*ret_page = pfn_to_page(__phys_to_pfn(phys));
-		ptr = (void *)val;
-		memset(ptr, 0, size);
-	}
-
-	return ptr;
-}
-
-bool dma_free_from_pool(void *start, size_t size)
-{
-	if (!dma_in_atomic_pool(start, size))
-		return false;
-	gen_pool_free(atomic_pool, (unsigned long)start, size);
-	return true;
-}
-#endif /* CONFIG_DMA_DIRECT_REMAP */
diff --git a/kernel/events/callchain.c b/kernel/events/callchain.c
index c2b41a263166..334d48b16c36 100644
--- a/kernel/events/callchain.c
+++ b/kernel/events/callchain.c
@@ -16,7 +16,7 @@
 
 struct callchain_cpus_entries {
 	struct rcu_head			rcu_head;
-	struct perf_callchain_entry	*cpu_entries[0];
+	struct perf_callchain_entry	*cpu_entries[];
 };
 
 int sysctl_perf_event_max_stack __read_mostly = PERF_MAX_STACK_DEPTH;
@@ -236,7 +236,7 @@ get_perf_callchain(struct pt_regs *regs, u32 init_nr, bool kernel, bool user,
  * sysctl_perf_event_max_contexts_per_stack.
  */
 int perf_event_max_stack_handler(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp, loff_t *ppos)
+				 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *value = table->data;
 	int new_value = *value, ret;
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 633b4ae72ed5..d4c914eb9230 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -437,8 +437,7 @@ static void update_perf_cpu_limits(void)
 static bool perf_rotate_context(struct perf_cpu_context *cpuctx);
 
 int perf_proc_update_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 	int perf_cpu = sysctl_perf_cpu_time_max_percent;
@@ -462,8 +461,7 @@ int perf_proc_update_handler(struct ctl_table *table, int write,
 int sysctl_perf_cpu_time_max_percent __read_mostly = DEFAULT_CPU_TIME_MAX_PERCENT;
 
 int perf_cpu_time_max_percent_handler(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp,
-				loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 
@@ -9404,7 +9402,7 @@ static int perf_kprobe_event_init(struct perf_event *event)
 	if (event->attr.type != perf_kprobe.type)
 		return -ENOENT;
 
-	if (!capable(CAP_SYS_ADMIN))
+	if (!perfmon_capable())
 		return -EACCES;
 
 	/*
@@ -9464,7 +9462,7 @@ static int perf_uprobe_event_init(struct perf_event *event)
 	if (event->attr.type != perf_uprobe.type)
 		return -ENOENT;
 
-	if (!capable(CAP_SYS_ADMIN))
+	if (!perfmon_capable())
 		return -EACCES;
 
 	/*
@@ -11511,7 +11509,7 @@ SYSCALL_DEFINE5(perf_event_open,
 	}
 
 	if (attr.namespaces) {
-		if (!capable(CAP_SYS_ADMIN))
+		if (!perfmon_capable())
 			return -EACCES;
 	}
 
diff --git a/kernel/events/internal.h b/kernel/events/internal.h
index f16f66b6b655..fcbf5616a441 100644
--- a/kernel/events/internal.h
+++ b/kernel/events/internal.h
@@ -55,7 +55,7 @@ struct perf_buffer {
 	void				*aux_priv;
 
 	struct perf_event_mmap_page	*user_page;
-	void				*data_pages[0];
+	void				*data_pages[];
 };
 
 extern void rb_free(struct perf_buffer *rb);
diff --git a/kernel/exit.c b/kernel/exit.c
index ce2a75bc0ade..e1f73d634d7f 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1465,23 +1465,6 @@ static long do_wait(struct wait_opts *wo)
 	return retval;
 }
 
-static struct pid *pidfd_get_pid(unsigned int fd)
-{
-	struct fd f;
-	struct pid *pid;
-
-	f = fdget(fd);
-	if (!f.file)
-		return ERR_PTR(-EBADF);
-
-	pid = pidfd_pid(f.file);
-	if (!IS_ERR(pid))
-		get_pid(pid);
-
-	fdput(f);
-	return pid;
-}
-
 static long kernel_waitid(int which, pid_t upid, struct waitid_info *infop,
 			  int options, struct rusage *ru)
 {
diff --git a/kernel/fork.c b/kernel/fork.c
index 8c700f881d92..0c7a2d23b273 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -359,7 +359,13 @@ struct vm_area_struct *vm_area_dup(struct vm_area_struct *orig)
 	struct vm_area_struct *new = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL);
 
 	if (new) {
-		*new = *orig;
+		ASSERT_EXCLUSIVE_WRITER(orig->vm_flags);
+		ASSERT_EXCLUSIVE_WRITER(orig->vm_file);
+		/*
+		 * orig->shared.rb may be modified concurrently, but the clone
+		 * will be reinitialized.
+		 */
+		*new = data_race(*orig);
 		INIT_LIST_HEAD(&new->anon_vma_chain);
 		new->vm_next = new->vm_prev = NULL;
 	}
@@ -1683,6 +1689,11 @@ static inline void rcu_copy_process(struct task_struct *p)
 	INIT_LIST_HEAD(&p->rcu_tasks_holdout_list);
 	p->rcu_tasks_idle_cpu = -1;
 #endif /* #ifdef CONFIG_TASKS_RCU */
+#ifdef CONFIG_TASKS_TRACE_RCU
+	p->trc_reader_nesting = 0;
+	p->trc_reader_special.s = 0;
+	INIT_LIST_HEAD(&p->trc_holdout_list);
+#endif /* #ifdef CONFIG_TASKS_TRACE_RCU */
 }
 
 struct pid *pidfd_pid(const struct file *file)
diff --git a/kernel/futex.c b/kernel/futex.c
index b59532862bc0..b4b9f960b610 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -486,10 +486,13 @@ static u64 get_inode_sequence_number(struct inode *inode)
  * The key words are stored in @key on success.
  *
  * For shared mappings (when @fshared), the key is:
+ *
  *   ( inode->i_sequence, page->index, offset_within_page )
+ *
  * [ also see get_inode_sequence_number() ]
  *
  * For private mappings (or when !@fshared), the key is:
+ *
  *   ( current->mm, address, 0 )
  *
  * This allows (cross process, where applicable) identification of the futex
diff --git a/kernel/groups.c b/kernel/groups.c
index daae2f2dc6d4..6ee6691f6839 100644
--- a/kernel/groups.c
+++ b/kernel/groups.c
@@ -20,7 +20,7 @@ struct group_info *groups_alloc(int gidsetsize)
 	len = sizeof(struct group_info) + sizeof(kgid_t) * gidsetsize;
 	gi = kmalloc(len, GFP_KERNEL_ACCOUNT|__GFP_NOWARN|__GFP_NORETRY);
 	if (!gi)
-		gi = __vmalloc(len, GFP_KERNEL_ACCOUNT, PAGE_KERNEL);
+		gi = __vmalloc(len, GFP_KERNEL_ACCOUNT);
 	if (!gi)
 		return NULL;
 
diff --git a/kernel/hung_task.c b/kernel/hung_task.c
index 14a625c16cb3..a672db830a94 100644
--- a/kernel/hung_task.c
+++ b/kernel/hung_task.c
@@ -53,9 +53,18 @@ int __read_mostly sysctl_hung_task_warnings = 10;
 static int __read_mostly did_panic;
 static bool hung_task_show_lock;
 static bool hung_task_call_panic;
+static bool hung_task_show_all_bt;
 
 static struct task_struct *watchdog_task;
 
+#ifdef CONFIG_SMP
+/*
+ * Should we dump all CPUs backtraces in a hung task event?
+ * Defaults to 0, can be changed via sysctl.
+ */
+unsigned int __read_mostly sysctl_hung_task_all_cpu_backtrace;
+#endif /* CONFIG_SMP */
+
 /*
  * Should we panic (and reboot, if panic_timeout= is set) when a
  * hung task is detected:
@@ -63,16 +72,6 @@ static struct task_struct *watchdog_task;
 unsigned int __read_mostly sysctl_hung_task_panic =
 				CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE;
 
-static int __init hung_task_panic_setup(char *str)
-{
-	int rc = kstrtouint(str, 0, &sysctl_hung_task_panic);
-
-	if (rc)
-		return rc;
-	return 1;
-}
-__setup("hung_task_panic=", hung_task_panic_setup);
-
 static int
 hung_task_panic(struct notifier_block *this, unsigned long event, void *ptr)
 {
@@ -137,11 +136,55 @@ static void check_hung_task(struct task_struct *t, unsigned long timeout)
 			" disables this message.\n");
 		sched_show_task(t);
 		hung_task_show_lock = true;
+
+		if (sysctl_hung_task_all_cpu_backtrace)
+			hung_task_show_all_bt = true;
 	}
 
 	touch_nmi_watchdog();
 }
 
+static void check_killed_task(struct task_struct *t, unsigned long timeout)
+{
+	unsigned long stamp = t->killed_time;
+
+	/*
+	 * Ensure the task is not frozen.
+	 * Also, skip vfork and any other user process that freezer should skip.
+	 */
+	if (unlikely(t->flags & (PF_FROZEN | PF_FREEZER_SKIP)))
+		return;
+	/*
+	 * Skip threads which are already inside do_exit(), for exit_mm() etc.
+	 * might take many seconds.
+	 */
+	if (t->flags & PF_EXITING)
+		return;
+	if (!stamp) {
+		stamp = jiffies;
+		if (!stamp)
+			stamp++;
+		t->killed_time = stamp;
+		return;
+	}
+	if (time_is_after_jiffies(stamp + timeout * HZ))
+		return;
+	trace_sched_process_hang(t);
+	if (sysctl_hung_task_panic) {
+		console_verbose();
+		hung_task_call_panic = true;
+	}
+	/*
+	 * This thread failed to terminate for more than
+	 * sysctl_hung_task_timeout_secs seconds, complain:
+	 */
+	pr_err("INFO: task %s:%d can't die for more than %ld seconds.\n",
+	       t->comm, t->pid, (jiffies - stamp) / HZ);
+	sched_show_task(t);
+	hung_task_show_lock = true;
+	touch_nmi_watchdog();
+}
+
 /*
  * To avoid extending the RCU grace period for an unbounded amount of time,
  * periodically exit the critical section and enter a new one.
@@ -193,6 +236,9 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout)
 				goto unlock;
 			last_break = jiffies;
 		}
+		/* Check threads which are about to terminate. */
+		if (unlikely(fatal_signal_pending(t)))
+			check_killed_task(t, timeout);
 		/* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
 		if (t->state == TASK_UNINTERRUPTIBLE)
 			check_hung_task(t, timeout);
@@ -201,10 +247,14 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout)
 	rcu_read_unlock();
 	if (hung_task_show_lock)
 		debug_show_all_locks();
-	if (hung_task_call_panic) {
+
+	if (hung_task_show_all_bt) {
+		hung_task_show_all_bt = false;
 		trigger_all_cpu_backtrace();
-		panic("hung_task: blocked tasks");
 	}
+
+	if (hung_task_call_panic)
+		panic("hung_task: blocked tasks");
 }
 
 static long hung_timeout_jiffies(unsigned long last_checked,
diff --git a/kernel/kcov.c b/kernel/kcov.c
index f50354202dbe..55c5d883a93e 100644
--- a/kernel/kcov.c
+++ b/kernel/kcov.c
@@ -86,6 +86,18 @@ static DEFINE_SPINLOCK(kcov_remote_lock);
 static DEFINE_HASHTABLE(kcov_remote_map, 4);
 static struct list_head kcov_remote_areas = LIST_HEAD_INIT(kcov_remote_areas);
 
+struct kcov_percpu_data {
+	void			*irq_area;
+
+	unsigned int		saved_mode;
+	unsigned int		saved_size;
+	void			*saved_area;
+	struct kcov		*saved_kcov;
+	int			saved_sequence;
+};
+
+DEFINE_PER_CPU(struct kcov_percpu_data, kcov_percpu_data);
+
 /* Must be called with kcov_remote_lock locked. */
 static struct kcov_remote *kcov_remote_find(u64 handle)
 {
@@ -98,6 +110,7 @@ static struct kcov_remote *kcov_remote_find(u64 handle)
 	return NULL;
 }
 
+/* Must be called with kcov_remote_lock locked. */
 static struct kcov_remote *kcov_remote_add(struct kcov *kcov, u64 handle)
 {
 	struct kcov_remote *remote;
@@ -119,16 +132,13 @@ static struct kcov_remote_area *kcov_remote_area_get(unsigned int size)
 	struct kcov_remote_area *area;
 	struct list_head *pos;
 
-	kcov_debug("size = %u\n", size);
 	list_for_each(pos, &kcov_remote_areas) {
 		area = list_entry(pos, struct kcov_remote_area, list);
 		if (area->size == size) {
 			list_del(&area->list);
-			kcov_debug("rv = %px\n", area);
 			return area;
 		}
 	}
-	kcov_debug("rv = NULL\n");
 	return NULL;
 }
 
@@ -136,7 +146,6 @@ static struct kcov_remote_area *kcov_remote_area_get(unsigned int size)
 static void kcov_remote_area_put(struct kcov_remote_area *area,
 					unsigned int size)
 {
-	kcov_debug("area = %px, size = %u\n", area, size);
 	INIT_LIST_HEAD(&area->list);
 	area->size = size;
 	list_add(&area->list, &kcov_remote_areas);
@@ -148,9 +157,10 @@ static notrace bool check_kcov_mode(enum kcov_mode needed_mode, struct task_stru
 
 	/*
 	 * We are interested in code coverage as a function of a syscall inputs,
-	 * so we ignore code executed in interrupts.
+	 * so we ignore code executed in interrupts, unless we are in a remote
+	 * coverage collection section in a softirq.
 	 */
-	if (!in_task())
+	if (!in_task() && !(in_serving_softirq() && t->kcov_softirq))
 		return false;
 	mode = READ_ONCE(t->kcov_mode);
 	/*
@@ -312,23 +322,26 @@ void notrace __sanitizer_cov_trace_switch(u64 val, u64 *cases)
 EXPORT_SYMBOL(__sanitizer_cov_trace_switch);
 #endif /* ifdef CONFIG_KCOV_ENABLE_COMPARISONS */
 
-static void kcov_start(struct task_struct *t, unsigned int size,
-			void *area, enum kcov_mode mode, int sequence)
+static void kcov_start(struct task_struct *t, struct kcov *kcov,
+			unsigned int size, void *area, enum kcov_mode mode,
+			int sequence)
 {
 	kcov_debug("t = %px, size = %u, area = %px\n", t, size, area);
+	t->kcov = kcov;
 	/* Cache in task struct for performance. */
 	t->kcov_size = size;
 	t->kcov_area = area;
+	t->kcov_sequence = sequence;
 	/* See comment in check_kcov_mode(). */
 	barrier();
 	WRITE_ONCE(t->kcov_mode, mode);
-	t->kcov_sequence = sequence;
 }
 
 static void kcov_stop(struct task_struct *t)
 {
 	WRITE_ONCE(t->kcov_mode, KCOV_MODE_DISABLED);
 	barrier();
+	t->kcov = NULL;
 	t->kcov_size = 0;
 	t->kcov_area = NULL;
 }
@@ -336,7 +349,6 @@ static void kcov_stop(struct task_struct *t)
 static void kcov_task_reset(struct task_struct *t)
 {
 	kcov_stop(t);
-	t->kcov = NULL;
 	t->kcov_sequence = 0;
 	t->kcov_handle = 0;
 }
@@ -361,18 +373,18 @@ static void kcov_remote_reset(struct kcov *kcov)
 	int bkt;
 	struct kcov_remote *remote;
 	struct hlist_node *tmp;
+	unsigned long flags;
 
-	spin_lock(&kcov_remote_lock);
+	spin_lock_irqsave(&kcov_remote_lock, flags);
 	hash_for_each_safe(kcov_remote_map, bkt, tmp, remote, hnode) {
 		if (remote->kcov != kcov)
 			continue;
-		kcov_debug("removing handle %llx\n", remote->handle);
 		hash_del(&remote->hnode);
 		kfree(remote);
 	}
 	/* Do reset before unlock to prevent races with kcov_remote_start(). */
 	kcov_reset(kcov);
-	spin_unlock(&kcov_remote_lock);
+	spin_unlock_irqrestore(&kcov_remote_lock, flags);
 }
 
 static void kcov_disable(struct task_struct *t, struct kcov *kcov)
@@ -401,12 +413,13 @@ static void kcov_put(struct kcov *kcov)
 void kcov_task_exit(struct task_struct *t)
 {
 	struct kcov *kcov;
+	unsigned long flags;
 
 	kcov = t->kcov;
 	if (kcov == NULL)
 		return;
 
-	spin_lock(&kcov->lock);
+	spin_lock_irqsave(&kcov->lock, flags);
 	kcov_debug("t = %px, kcov->t = %px\n", t, kcov->t);
 	/*
 	 * For KCOV_ENABLE devices we want to make sure that t->kcov->t == t,
@@ -430,12 +443,12 @@ void kcov_task_exit(struct task_struct *t)
 	 * By combining all three checks into one we get:
 	 */
 	if (WARN_ON(kcov->t != t)) {
-		spin_unlock(&kcov->lock);
+		spin_unlock_irqrestore(&kcov->lock, flags);
 		return;
 	}
 	/* Just to not leave dangling references behind. */
 	kcov_disable(t, kcov);
-	spin_unlock(&kcov->lock);
+	spin_unlock_irqrestore(&kcov->lock, flags);
 	kcov_put(kcov);
 }
 
@@ -446,12 +459,13 @@ static int kcov_mmap(struct file *filep, struct vm_area_struct *vma)
 	struct kcov *kcov = vma->vm_file->private_data;
 	unsigned long size, off;
 	struct page *page;
+	unsigned long flags;
 
 	area = vmalloc_user(vma->vm_end - vma->vm_start);
 	if (!area)
 		return -ENOMEM;
 
-	spin_lock(&kcov->lock);
+	spin_lock_irqsave(&kcov->lock, flags);
 	size = kcov->size * sizeof(unsigned long);
 	if (kcov->mode != KCOV_MODE_INIT || vma->vm_pgoff != 0 ||
 	    vma->vm_end - vma->vm_start != size) {
@@ -461,7 +475,7 @@ static int kcov_mmap(struct file *filep, struct vm_area_struct *vma)
 	if (!kcov->area) {
 		kcov->area = area;
 		vma->vm_flags |= VM_DONTEXPAND;
-		spin_unlock(&kcov->lock);
+		spin_unlock_irqrestore(&kcov->lock, flags);
 		for (off = 0; off < size; off += PAGE_SIZE) {
 			page = vmalloc_to_page(kcov->area + off);
 			if (vm_insert_page(vma, vma->vm_start + off, page))
@@ -470,7 +484,7 @@ static int kcov_mmap(struct file *filep, struct vm_area_struct *vma)
 		return 0;
 	}
 exit:
-	spin_unlock(&kcov->lock);
+	spin_unlock_irqrestore(&kcov->lock, flags);
 	vfree(area);
 	return res;
 }
@@ -550,10 +564,10 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
 	int mode, i;
 	struct kcov_remote_arg *remote_arg;
 	struct kcov_remote *remote;
+	unsigned long flags;
 
 	switch (cmd) {
 	case KCOV_INIT_TRACE:
-		kcov_debug("KCOV_INIT_TRACE\n");
 		/*
 		 * Enable kcov in trace mode and setup buffer size.
 		 * Must happen before anything else.
@@ -572,7 +586,6 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
 		kcov->mode = KCOV_MODE_INIT;
 		return 0;
 	case KCOV_ENABLE:
-		kcov_debug("KCOV_ENABLE\n");
 		/*
 		 * Enable coverage for the current task.
 		 * At this point user must have been enabled trace mode,
@@ -590,15 +603,13 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
 			return mode;
 		kcov_fault_in_area(kcov);
 		kcov->mode = mode;
-		kcov_start(t, kcov->size, kcov->area, kcov->mode,
+		kcov_start(t, kcov, kcov->size, kcov->area, kcov->mode,
 				kcov->sequence);
-		t->kcov = kcov;
 		kcov->t = t;
 		/* Put either in kcov_task_exit() or in KCOV_DISABLE. */
 		kcov_get(kcov);
 		return 0;
 	case KCOV_DISABLE:
-		kcov_debug("KCOV_DISABLE\n");
 		/* Disable coverage for the current task. */
 		unused = arg;
 		if (unused != 0 || current->kcov != kcov)
@@ -610,7 +621,6 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
 		kcov_put(kcov);
 		return 0;
 	case KCOV_REMOTE_ENABLE:
-		kcov_debug("KCOV_REMOTE_ENABLE\n");
 		if (kcov->mode != KCOV_MODE_INIT || !kcov->area)
 			return -EINVAL;
 		t = current;
@@ -627,41 +637,42 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
 		kcov->t = t;
 		kcov->remote = true;
 		kcov->remote_size = remote_arg->area_size;
-		spin_lock(&kcov_remote_lock);
+		spin_lock_irqsave(&kcov_remote_lock, flags);
 		for (i = 0; i < remote_arg->num_handles; i++) {
-			kcov_debug("handle %llx\n", remote_arg->handles[i]);
 			if (!kcov_check_handle(remote_arg->handles[i],
 						false, true, false)) {
-				spin_unlock(&kcov_remote_lock);
+				spin_unlock_irqrestore(&kcov_remote_lock,
+							flags);
 				kcov_disable(t, kcov);
 				return -EINVAL;
 			}
 			remote = kcov_remote_add(kcov, remote_arg->handles[i]);
 			if (IS_ERR(remote)) {
-				spin_unlock(&kcov_remote_lock);
+				spin_unlock_irqrestore(&kcov_remote_lock,
+							flags);
 				kcov_disable(t, kcov);
 				return PTR_ERR(remote);
 			}
 		}
 		if (remote_arg->common_handle) {
-			kcov_debug("common handle %llx\n",
-					remote_arg->common_handle);
 			if (!kcov_check_handle(remote_arg->common_handle,
 						true, false, false)) {
-				spin_unlock(&kcov_remote_lock);
+				spin_unlock_irqrestore(&kcov_remote_lock,
+							flags);
 				kcov_disable(t, kcov);
 				return -EINVAL;
 			}
 			remote = kcov_remote_add(kcov,
 					remote_arg->common_handle);
 			if (IS_ERR(remote)) {
-				spin_unlock(&kcov_remote_lock);
+				spin_unlock_irqrestore(&kcov_remote_lock,
+							flags);
 				kcov_disable(t, kcov);
 				return PTR_ERR(remote);
 			}
 			t->kcov_handle = remote_arg->common_handle;
 		}
-		spin_unlock(&kcov_remote_lock);
+		spin_unlock_irqrestore(&kcov_remote_lock, flags);
 		/* Put either in kcov_task_exit() or in KCOV_DISABLE. */
 		kcov_get(kcov);
 		return 0;
@@ -677,6 +688,7 @@ static long kcov_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
 	struct kcov_remote_arg *remote_arg = NULL;
 	unsigned int remote_num_handles;
 	unsigned long remote_arg_size;
+	unsigned long flags;
 
 	if (cmd == KCOV_REMOTE_ENABLE) {
 		if (get_user(remote_num_handles, (unsigned __user *)(arg +
@@ -697,9 +709,9 @@ static long kcov_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
 	}
 
 	kcov = filep->private_data;
-	spin_lock(&kcov->lock);
+	spin_lock_irqsave(&kcov->lock, flags);
 	res = kcov_ioctl_locked(kcov, cmd, arg);
-	spin_unlock(&kcov->lock);
+	spin_unlock_irqrestore(&kcov->lock, flags);
 
 	kfree(remote_arg);
 
@@ -716,8 +728,8 @@ static const struct file_operations kcov_fops = {
 
 /*
  * kcov_remote_start() and kcov_remote_stop() can be used to annotate a section
- * of code in a kernel background thread to allow kcov to be used to collect
- * coverage from that part of code.
+ * of code in a kernel background thread or in a softirq to allow kcov to be
+ * used to collect coverage from that part of code.
  *
  * The handle argument of kcov_remote_start() identifies a code section that is
  * used for coverage collection. A userspace process passes this handle to
@@ -728,9 +740,9 @@ static const struct file_operations kcov_fops = {
  * the type of the kernel thread whose code is being annotated.
  *
  * For global kernel threads that are spawned in a limited number of instances
- * (e.g. one USB hub_event() worker thread is spawned per USB HCD), each
- * instance must be assigned a unique 4-byte instance id. The instance id is
- * then combined with a 1-byte subsystem id to get a handle via
+ * (e.g. one USB hub_event() worker thread is spawned per USB HCD) and for
+ * softirqs, each instance must be assigned a unique 4-byte instance id. The
+ * instance id is then combined with a 1-byte subsystem id to get a handle via
  * kcov_remote_handle(subsystem_id, instance_id).
  *
  * For local kernel threads that are spawned from system calls handler when a
@@ -740,8 +752,8 @@ static const struct file_operations kcov_fops = {
  * kcov_remote_handle() with KCOV_SUBSYSTEM_COMMON as the subsystem id and an
  * arbitrary 4-byte non-zero number as the instance id). This common handle
  * then gets saved into the task_struct of the process that issued the
- * KCOV_REMOTE_ENABLE ioctl. When this proccess issues system calls that spawn
- * kernel threads, the common handle must be retrived via kcov_common_handle()
+ * KCOV_REMOTE_ENABLE ioctl. When this process issues system calls that spawn
+ * kernel threads, the common handle must be retrieved via kcov_common_handle()
  * and passed to the spawned threads via custom annotations. Those kernel
  * threads must in turn be annotated with kcov_remote_start(common_handle) and
  * kcov_remote_stop(). All of the threads that are spawned by the same process
@@ -749,70 +761,136 @@ static const struct file_operations kcov_fops = {
  *
  * See Documentation/dev-tools/kcov.rst for more details.
  *
- * Internally, this function looks up the kcov device associated with the
+ * Internally, kcov_remote_start() looks up the kcov device associated with the
  * provided handle, allocates an area for coverage collection, and saves the
  * pointers to kcov and area into the current task_struct to allow coverage to
  * be collected via __sanitizer_cov_trace_pc()
  * In turns kcov_remote_stop() clears those pointers from task_struct to stop
  * collecting coverage and copies all collected coverage into the kcov area.
  */
+
+static inline bool kcov_mode_enabled(unsigned int mode)
+{
+	return (mode & ~KCOV_IN_CTXSW) != KCOV_MODE_DISABLED;
+}
+
+void kcov_remote_softirq_start(struct task_struct *t)
+{
+	struct kcov_percpu_data *data = this_cpu_ptr(&kcov_percpu_data);
+	unsigned int mode;
+
+	mode = READ_ONCE(t->kcov_mode);
+	barrier();
+	if (kcov_mode_enabled(mode)) {
+		data->saved_mode = mode;
+		data->saved_size = t->kcov_size;
+		data->saved_area = t->kcov_area;
+		data->saved_sequence = t->kcov_sequence;
+		data->saved_kcov = t->kcov;
+		kcov_stop(t);
+	}
+}
+
+void kcov_remote_softirq_stop(struct task_struct *t)
+{
+	struct kcov_percpu_data *data = this_cpu_ptr(&kcov_percpu_data);
+
+	if (data->saved_kcov) {
+		kcov_start(t, data->saved_kcov, data->saved_size,
+				data->saved_area, data->saved_mode,
+				data->saved_sequence);
+		data->saved_mode = 0;
+		data->saved_size = 0;
+		data->saved_area = NULL;
+		data->saved_sequence = 0;
+		data->saved_kcov = NULL;
+	}
+}
+
 void kcov_remote_start(u64 handle)
 {
+	struct task_struct *t = current;
 	struct kcov_remote *remote;
+	struct kcov *kcov;
+	unsigned int mode;
 	void *area;
-	struct task_struct *t;
 	unsigned int size;
-	enum kcov_mode mode;
 	int sequence;
+	unsigned long flags;
 
 	if (WARN_ON(!kcov_check_handle(handle, true, true, true)))
 		return;
-	if (WARN_ON(!in_task()))
+	if (!in_task() && !in_serving_softirq())
 		return;
-	t = current;
+
+	local_irq_save(flags);
+
 	/*
-	 * Check that kcov_remote_start is not called twice
-	 * nor called by user tasks (with enabled kcov).
+	 * Check that kcov_remote_start() is not called twice in background
+	 * threads nor called by user tasks (with enabled kcov).
 	 */
-	if (WARN_ON(t->kcov))
+	mode = READ_ONCE(t->kcov_mode);
+	if (WARN_ON(in_task() && kcov_mode_enabled(mode))) {
+		local_irq_restore(flags);
 		return;
-
-	kcov_debug("handle = %llx\n", handle);
+	}
+	/*
+	 * Check that kcov_remote_start() is not called twice in softirqs.
+	 * Note, that kcov_remote_start() can be called from a softirq that
+	 * happened while collecting coverage from a background thread.
+	 */
+	if (WARN_ON(in_serving_softirq() && t->kcov_softirq)) {
+		local_irq_restore(flags);
+		return;
+	}
 
 	spin_lock(&kcov_remote_lock);
 	remote = kcov_remote_find(handle);
 	if (!remote) {
-		kcov_debug("no remote found");
-		spin_unlock(&kcov_remote_lock);
+		spin_unlock_irqrestore(&kcov_remote_lock, flags);
 		return;
 	}
+	kcov_debug("handle = %llx, context: %s\n", handle,
+			in_task() ? "task" : "softirq");
+	kcov = remote->kcov;
 	/* Put in kcov_remote_stop(). */
-	kcov_get(remote->kcov);
-	t->kcov = remote->kcov;
+	kcov_get(kcov);
 	/*
 	 * Read kcov fields before unlock to prevent races with
 	 * KCOV_DISABLE / kcov_remote_reset().
 	 */
-	size = remote->kcov->remote_size;
-	mode = remote->kcov->mode;
-	sequence = remote->kcov->sequence;
-	area = kcov_remote_area_get(size);
-	spin_unlock(&kcov_remote_lock);
+	mode = kcov->mode;
+	sequence = kcov->sequence;
+	if (in_task()) {
+		size = kcov->remote_size;
+		area = kcov_remote_area_get(size);
+	} else {
+		size = CONFIG_KCOV_IRQ_AREA_SIZE;
+		area = this_cpu_ptr(&kcov_percpu_data)->irq_area;
+	}
+	spin_unlock_irqrestore(&kcov_remote_lock, flags);
 
+	/* Can only happen when in_task(). */
 	if (!area) {
 		area = vmalloc(size * sizeof(unsigned long));
 		if (!area) {
-			t->kcov = NULL;
-			kcov_put(remote->kcov);
+			kcov_put(kcov);
 			return;
 		}
 	}
+
+	local_irq_save(flags);
+
 	/* Reset coverage size. */
 	*(u64 *)area = 0;
 
-	kcov_debug("area = %px, size = %u", area, size);
+	if (in_serving_softirq()) {
+		kcov_remote_softirq_start(t);
+		t->kcov_softirq = 1;
+	}
+	kcov_start(t, kcov, size, area, mode, sequence);
 
-	kcov_start(t, size, area, mode, sequence);
+	local_irq_restore(flags);
 
 }
 EXPORT_SYMBOL(kcov_remote_start);
@@ -876,34 +954,58 @@ static void kcov_move_area(enum kcov_mode mode, void *dst_area,
 void kcov_remote_stop(void)
 {
 	struct task_struct *t = current;
-	struct kcov *kcov = t->kcov;
-	void *area = t->kcov_area;
-	unsigned int size = t->kcov_size;
-	int sequence = t->kcov_sequence;
+	struct kcov *kcov;
+	unsigned int mode;
+	void *area;
+	unsigned int size;
+	int sequence;
+	unsigned long flags;
 
-	if (!kcov) {
-		kcov_debug("no kcov found\n");
+	if (!in_task() && !in_serving_softirq())
+		return;
+
+	local_irq_save(flags);
+
+	mode = READ_ONCE(t->kcov_mode);
+	barrier();
+	if (!kcov_mode_enabled(mode)) {
+		local_irq_restore(flags);
+		return;
+	}
+	kcov = t->kcov;
+	area = t->kcov_area;
+	size = t->kcov_size;
+	sequence = t->kcov_sequence;
+
+	if (WARN_ON(!in_serving_softirq() && t->kcov_softirq)) {
+		local_irq_restore(flags);
 		return;
 	}
 
 	kcov_stop(t);
-	t->kcov = NULL;
+	if (in_serving_softirq()) {
+		t->kcov_softirq = 0;
+		kcov_remote_softirq_stop(t);
+	}
 
 	spin_lock(&kcov->lock);
 	/*
 	 * KCOV_DISABLE could have been called between kcov_remote_start()
-	 * and kcov_remote_stop(), hence the check.
+	 * and kcov_remote_stop(), hence the sequence check.
 	 */
-	kcov_debug("move if: %d == %d && %d\n",
-		sequence, kcov->sequence, (int)kcov->remote);
 	if (sequence == kcov->sequence && kcov->remote)
 		kcov_move_area(kcov->mode, kcov->area, kcov->size, area);
 	spin_unlock(&kcov->lock);
 
-	spin_lock(&kcov_remote_lock);
-	kcov_remote_area_put(area, size);
-	spin_unlock(&kcov_remote_lock);
+	if (in_task()) {
+		spin_lock(&kcov_remote_lock);
+		kcov_remote_area_put(area, size);
+		spin_unlock(&kcov_remote_lock);
+	}
+
+	local_irq_restore(flags);
 
+	/* Get in kcov_remote_start(). */
 	kcov_put(kcov);
 }
 EXPORT_SYMBOL(kcov_remote_stop);
@@ -917,6 +1019,16 @@ EXPORT_SYMBOL(kcov_common_handle);
 
 static int __init kcov_init(void)
 {
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		void *area = vmalloc(CONFIG_KCOV_IRQ_AREA_SIZE *
+				sizeof(unsigned long));
+		if (!area)
+			return -ENOMEM;
+		per_cpu_ptr(&kcov_percpu_data, cpu)->irq_area = area;
+	}
+
 	/*
 	 * The kcov debugfs file won't ever get removed and thus,
 	 * there is no need to protect it against removal races. The
diff --git a/kernel/kcsan/Makefile b/kernel/kcsan/Makefile
new file mode 100644
index 000000000000..14533cf24bc3
--- /dev/null
+++ b/kernel/kcsan/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+KCSAN_SANITIZE := n
+KCOV_INSTRUMENT := n
+UBSAN_SANITIZE := n
+
+CFLAGS_REMOVE_core.o = $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_debugfs.o = $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_report.o = $(CC_FLAGS_FTRACE)
+
+CFLAGS_core.o := $(call cc-option,-fno-conserve-stack,) \
+	$(call cc-option,-fno-stack-protector,)
+
+obj-y := core.o debugfs.o report.o
+obj-$(CONFIG_KCSAN_SELFTEST) += test.o
+
+CFLAGS_kcsan-test.o := $(CFLAGS_KCSAN) -g -fno-omit-frame-pointer
+obj-$(CONFIG_KCSAN_TEST) += kcsan-test.o
diff --git a/kernel/kcsan/atomic.h b/kernel/kcsan/atomic.h
new file mode 100644
index 000000000000..be9e625227f3
--- /dev/null
+++ b/kernel/kcsan/atomic.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _KERNEL_KCSAN_ATOMIC_H
+#define _KERNEL_KCSAN_ATOMIC_H
+
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+
+/*
+ * Special rules for certain memory where concurrent conflicting accesses are
+ * common, however, the current convention is to not mark them; returns true if
+ * access to @ptr should be considered atomic. Called from slow-path.
+ */
+static bool kcsan_is_atomic_special(const volatile void *ptr)
+{
+	/* volatile globals that have been observed in data races. */
+	return ptr == &jiffies || ptr == &current->state;
+}
+
+#endif /* _KERNEL_KCSAN_ATOMIC_H */
diff --git a/kernel/kcsan/core.c b/kernel/kcsan/core.c
new file mode 100644
index 000000000000..a73a66cf79df
--- /dev/null
+++ b/kernel/kcsan/core.c
@@ -0,0 +1,807 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/atomic.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/moduleparam.h>
+#include <linux/percpu.h>
+#include <linux/preempt.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+
+#include "atomic.h"
+#include "encoding.h"
+#include "kcsan.h"
+
+static bool kcsan_early_enable = IS_ENABLED(CONFIG_KCSAN_EARLY_ENABLE);
+unsigned int kcsan_udelay_task = CONFIG_KCSAN_UDELAY_TASK;
+unsigned int kcsan_udelay_interrupt = CONFIG_KCSAN_UDELAY_INTERRUPT;
+static long kcsan_skip_watch = CONFIG_KCSAN_SKIP_WATCH;
+static bool kcsan_interrupt_watcher = IS_ENABLED(CONFIG_KCSAN_INTERRUPT_WATCHER);
+
+#ifdef MODULE_PARAM_PREFIX
+#undef MODULE_PARAM_PREFIX
+#endif
+#define MODULE_PARAM_PREFIX "kcsan."
+module_param_named(early_enable, kcsan_early_enable, bool, 0);
+module_param_named(udelay_task, kcsan_udelay_task, uint, 0644);
+module_param_named(udelay_interrupt, kcsan_udelay_interrupt, uint, 0644);
+module_param_named(skip_watch, kcsan_skip_watch, long, 0644);
+module_param_named(interrupt_watcher, kcsan_interrupt_watcher, bool, 0444);
+
+bool kcsan_enabled;
+
+/* Per-CPU kcsan_ctx for interrupts */
+static DEFINE_PER_CPU(struct kcsan_ctx, kcsan_cpu_ctx) = {
+	.disable_count		= 0,
+	.atomic_next		= 0,
+	.atomic_nest_count	= 0,
+	.in_flat_atomic		= false,
+	.access_mask		= 0,
+	.scoped_accesses	= {LIST_POISON1, NULL},
+};
+
+/*
+ * Helper macros to index into adjacent slots, starting from address slot
+ * itself, followed by the right and left slots.
+ *
+ * The purpose is 2-fold:
+ *
+ *	1. if during insertion the address slot is already occupied, check if
+ *	   any adjacent slots are free;
+ *	2. accesses that straddle a slot boundary due to size that exceeds a
+ *	   slot's range may check adjacent slots if any watchpoint matches.
+ *
+ * Note that accesses with very large size may still miss a watchpoint; however,
+ * given this should be rare, this is a reasonable trade-off to make, since this
+ * will avoid:
+ *
+ *	1. excessive contention between watchpoint checks and setup;
+ *	2. larger number of simultaneous watchpoints without sacrificing
+ *	   performance.
+ *
+ * Example: SLOT_IDX values for KCSAN_CHECK_ADJACENT=1, where i is [0, 1, 2]:
+ *
+ *   slot=0:  [ 1,  2,  0]
+ *   slot=9:  [10, 11,  9]
+ *   slot=63: [64, 65, 63]
+ */
+#define SLOT_IDX(slot, i) (slot + ((i + KCSAN_CHECK_ADJACENT) % NUM_SLOTS))
+
+/*
+ * SLOT_IDX_FAST is used in the fast-path. Not first checking the address's primary
+ * slot (middle) is fine if we assume that races occur rarely. The set of
+ * indices {SLOT_IDX(slot, i) | i in [0, NUM_SLOTS)} is equivalent to
+ * {SLOT_IDX_FAST(slot, i) | i in [0, NUM_SLOTS)}.
+ */
+#define SLOT_IDX_FAST(slot, i) (slot + i)
+
+/*
+ * Watchpoints, with each entry encoded as defined in encoding.h: in order to be
+ * able to safely update and access a watchpoint without introducing locking
+ * overhead, we encode each watchpoint as a single atomic long. The initial
+ * zero-initialized state matches INVALID_WATCHPOINT.
+ *
+ * Add NUM_SLOTS-1 entries to account for overflow; this helps avoid having to
+ * use more complicated SLOT_IDX_FAST calculation with modulo in the fast-path.
+ */
+static atomic_long_t watchpoints[CONFIG_KCSAN_NUM_WATCHPOINTS + NUM_SLOTS-1];
+
+/*
+ * Instructions to skip watching counter, used in should_watch(). We use a
+ * per-CPU counter to avoid excessive contention.
+ */
+static DEFINE_PER_CPU(long, kcsan_skip);
+
+static __always_inline atomic_long_t *find_watchpoint(unsigned long addr,
+						      size_t size,
+						      bool expect_write,
+						      long *encoded_watchpoint)
+{
+	const int slot = watchpoint_slot(addr);
+	const unsigned long addr_masked = addr & WATCHPOINT_ADDR_MASK;
+	atomic_long_t *watchpoint;
+	unsigned long wp_addr_masked;
+	size_t wp_size;
+	bool is_write;
+	int i;
+
+	BUILD_BUG_ON(CONFIG_KCSAN_NUM_WATCHPOINTS < NUM_SLOTS);
+
+	for (i = 0; i < NUM_SLOTS; ++i) {
+		watchpoint = &watchpoints[SLOT_IDX_FAST(slot, i)];
+		*encoded_watchpoint = atomic_long_read(watchpoint);
+		if (!decode_watchpoint(*encoded_watchpoint, &wp_addr_masked,
+				       &wp_size, &is_write))
+			continue;
+
+		if (expect_write && !is_write)
+			continue;
+
+		/* Check if the watchpoint matches the access. */
+		if (matching_access(wp_addr_masked, wp_size, addr_masked, size))
+			return watchpoint;
+	}
+
+	return NULL;
+}
+
+static inline atomic_long_t *
+insert_watchpoint(unsigned long addr, size_t size, bool is_write)
+{
+	const int slot = watchpoint_slot(addr);
+	const long encoded_watchpoint = encode_watchpoint(addr, size, is_write);
+	atomic_long_t *watchpoint;
+	int i;
+
+	/* Check slot index logic, ensuring we stay within array bounds. */
+	BUILD_BUG_ON(SLOT_IDX(0, 0) != KCSAN_CHECK_ADJACENT);
+	BUILD_BUG_ON(SLOT_IDX(0, KCSAN_CHECK_ADJACENT+1) != 0);
+	BUILD_BUG_ON(SLOT_IDX(CONFIG_KCSAN_NUM_WATCHPOINTS-1, KCSAN_CHECK_ADJACENT) != ARRAY_SIZE(watchpoints)-1);
+	BUILD_BUG_ON(SLOT_IDX(CONFIG_KCSAN_NUM_WATCHPOINTS-1, KCSAN_CHECK_ADJACENT+1) != ARRAY_SIZE(watchpoints) - NUM_SLOTS);
+
+	for (i = 0; i < NUM_SLOTS; ++i) {
+		long expect_val = INVALID_WATCHPOINT;
+
+		/* Try to acquire this slot. */
+		watchpoint = &watchpoints[SLOT_IDX(slot, i)];
+		if (atomic_long_try_cmpxchg_relaxed(watchpoint, &expect_val, encoded_watchpoint))
+			return watchpoint;
+	}
+
+	return NULL;
+}
+
+/*
+ * Return true if watchpoint was successfully consumed, false otherwise.
+ *
+ * This may return false if:
+ *
+ *	1. another thread already consumed the watchpoint;
+ *	2. the thread that set up the watchpoint already removed it;
+ *	3. the watchpoint was removed and then re-used.
+ */
+static __always_inline bool
+try_consume_watchpoint(atomic_long_t *watchpoint, long encoded_watchpoint)
+{
+	return atomic_long_try_cmpxchg_relaxed(watchpoint, &encoded_watchpoint, CONSUMED_WATCHPOINT);
+}
+
+/* Return true if watchpoint was not touched, false if already consumed. */
+static inline bool consume_watchpoint(atomic_long_t *watchpoint)
+{
+	return atomic_long_xchg_relaxed(watchpoint, CONSUMED_WATCHPOINT) != CONSUMED_WATCHPOINT;
+}
+
+/* Remove the watchpoint -- its slot may be reused after. */
+static inline void remove_watchpoint(atomic_long_t *watchpoint)
+{
+	atomic_long_set(watchpoint, INVALID_WATCHPOINT);
+}
+
+static __always_inline struct kcsan_ctx *get_ctx(void)
+{
+	/*
+	 * In interrupts, use raw_cpu_ptr to avoid unnecessary checks, that would
+	 * also result in calls that generate warnings in uaccess regions.
+	 */
+	return in_task() ? &current->kcsan_ctx : raw_cpu_ptr(&kcsan_cpu_ctx);
+}
+
+/* Check scoped accesses; never inline because this is a slow-path! */
+static noinline void kcsan_check_scoped_accesses(void)
+{
+	struct kcsan_ctx *ctx = get_ctx();
+	struct list_head *prev_save = ctx->scoped_accesses.prev;
+	struct kcsan_scoped_access *scoped_access;
+
+	ctx->scoped_accesses.prev = NULL;  /* Avoid recursion. */
+	list_for_each_entry(scoped_access, &ctx->scoped_accesses, list)
+		__kcsan_check_access(scoped_access->ptr, scoped_access->size, scoped_access->type);
+	ctx->scoped_accesses.prev = prev_save;
+}
+
+/* Rules for generic atomic accesses. Called from fast-path. */
+static __always_inline bool
+is_atomic(const volatile void *ptr, size_t size, int type, struct kcsan_ctx *ctx)
+{
+	if (type & KCSAN_ACCESS_ATOMIC)
+		return true;
+
+	/*
+	 * Unless explicitly declared atomic, never consider an assertion access
+	 * as atomic. This allows using them also in atomic regions, such as
+	 * seqlocks, without implicitly changing their semantics.
+	 */
+	if (type & KCSAN_ACCESS_ASSERT)
+		return false;
+
+	if (IS_ENABLED(CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC) &&
+	    (type & KCSAN_ACCESS_WRITE) && size <= sizeof(long) &&
+	    IS_ALIGNED((unsigned long)ptr, size))
+		return true; /* Assume aligned writes up to word size are atomic. */
+
+	if (ctx->atomic_next > 0) {
+		/*
+		 * Because we do not have separate contexts for nested
+		 * interrupts, in case atomic_next is set, we simply assume that
+		 * the outer interrupt set atomic_next. In the worst case, we
+		 * will conservatively consider operations as atomic. This is a
+		 * reasonable trade-off to make, since this case should be
+		 * extremely rare; however, even if extremely rare, it could
+		 * lead to false positives otherwise.
+		 */
+		if ((hardirq_count() >> HARDIRQ_SHIFT) < 2)
+			--ctx->atomic_next; /* in task, or outer interrupt */
+		return true;
+	}
+
+	return ctx->atomic_nest_count > 0 || ctx->in_flat_atomic;
+}
+
+static __always_inline bool
+should_watch(const volatile void *ptr, size_t size, int type, struct kcsan_ctx *ctx)
+{
+	/*
+	 * Never set up watchpoints when memory operations are atomic.
+	 *
+	 * Need to check this first, before kcsan_skip check below: (1) atomics
+	 * should not count towards skipped instructions, and (2) to actually
+	 * decrement kcsan_atomic_next for consecutive instruction stream.
+	 */
+	if (is_atomic(ptr, size, type, ctx))
+		return false;
+
+	if (this_cpu_dec_return(kcsan_skip) >= 0)
+		return false;
+
+	/*
+	 * NOTE: If we get here, kcsan_skip must always be reset in slow path
+	 * via reset_kcsan_skip() to avoid underflow.
+	 */
+
+	/* this operation should be watched */
+	return true;
+}
+
+static inline void reset_kcsan_skip(void)
+{
+	long skip_count = kcsan_skip_watch -
+			  (IS_ENABLED(CONFIG_KCSAN_SKIP_WATCH_RANDOMIZE) ?
+				   prandom_u32_max(kcsan_skip_watch) :
+				   0);
+	this_cpu_write(kcsan_skip, skip_count);
+}
+
+static __always_inline bool kcsan_is_enabled(void)
+{
+	return READ_ONCE(kcsan_enabled) && get_ctx()->disable_count == 0;
+}
+
+static inline unsigned int get_delay(void)
+{
+	unsigned int delay = in_task() ? kcsan_udelay_task : kcsan_udelay_interrupt;
+	return delay - (IS_ENABLED(CONFIG_KCSAN_DELAY_RANDOMIZE) ?
+				prandom_u32_max(delay) :
+				0);
+}
+
+/*
+ * Pull everything together: check_access() below contains the performance
+ * critical operations; the fast-path (including check_access) functions should
+ * all be inlinable by the instrumentation functions.
+ *
+ * The slow-path (kcsan_found_watchpoint, kcsan_setup_watchpoint) are
+ * non-inlinable -- note that, we prefix these with "kcsan_" to ensure they can
+ * be filtered from the stacktrace, as well as give them unique names for the
+ * UACCESS whitelist of objtool. Each function uses user_access_save/restore(),
+ * since they do not access any user memory, but instrumentation is still
+ * emitted in UACCESS regions.
+ */
+
+static noinline void kcsan_found_watchpoint(const volatile void *ptr,
+					    size_t size,
+					    int type,
+					    atomic_long_t *watchpoint,
+					    long encoded_watchpoint)
+{
+	unsigned long flags;
+	bool consumed;
+
+	if (!kcsan_is_enabled())
+		return;
+
+	/*
+	 * The access_mask check relies on value-change comparison. To avoid
+	 * reporting a race where e.g. the writer set up the watchpoint, but the
+	 * reader has access_mask!=0, we have to ignore the found watchpoint.
+	 */
+	if (get_ctx()->access_mask != 0)
+		return;
+
+	/*
+	 * Consume the watchpoint as soon as possible, to minimize the chances
+	 * of !consumed. Consuming the watchpoint must always be guarded by
+	 * kcsan_is_enabled() check, as otherwise we might erroneously
+	 * triggering reports when disabled.
+	 */
+	consumed = try_consume_watchpoint(watchpoint, encoded_watchpoint);
+
+	/* keep this after try_consume_watchpoint */
+	flags = user_access_save();
+
+	if (consumed) {
+		kcsan_report(ptr, size, type, KCSAN_VALUE_CHANGE_MAYBE,
+			     KCSAN_REPORT_CONSUMED_WATCHPOINT,
+			     watchpoint - watchpoints);
+	} else {
+		/*
+		 * The other thread may not print any diagnostics, as it has
+		 * already removed the watchpoint, or another thread consumed
+		 * the watchpoint before this thread.
+		 */
+		kcsan_counter_inc(KCSAN_COUNTER_REPORT_RACES);
+	}
+
+	if ((type & KCSAN_ACCESS_ASSERT) != 0)
+		kcsan_counter_inc(KCSAN_COUNTER_ASSERT_FAILURES);
+	else
+		kcsan_counter_inc(KCSAN_COUNTER_DATA_RACES);
+
+	user_access_restore(flags);
+}
+
+static noinline void
+kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type)
+{
+	const bool is_write = (type & KCSAN_ACCESS_WRITE) != 0;
+	const bool is_assert = (type & KCSAN_ACCESS_ASSERT) != 0;
+	atomic_long_t *watchpoint;
+	union {
+		u8 _1;
+		u16 _2;
+		u32 _4;
+		u64 _8;
+	} expect_value;
+	unsigned long access_mask;
+	enum kcsan_value_change value_change = KCSAN_VALUE_CHANGE_MAYBE;
+	unsigned long ua_flags = user_access_save();
+	unsigned long irq_flags = 0;
+
+	/*
+	 * Always reset kcsan_skip counter in slow-path to avoid underflow; see
+	 * should_watch().
+	 */
+	reset_kcsan_skip();
+
+	if (!kcsan_is_enabled())
+		goto out;
+
+	/*
+	 * Special atomic rules: unlikely to be true, so we check them here in
+	 * the slow-path, and not in the fast-path in is_atomic(). Call after
+	 * kcsan_is_enabled(), as we may access memory that is not yet
+	 * initialized during early boot.
+	 */
+	if (!is_assert && kcsan_is_atomic_special(ptr))
+		goto out;
+
+	if (!check_encodable((unsigned long)ptr, size)) {
+		kcsan_counter_inc(KCSAN_COUNTER_UNENCODABLE_ACCESSES);
+		goto out;
+	}
+
+	if (!kcsan_interrupt_watcher)
+		/* Use raw to avoid lockdep recursion via IRQ flags tracing. */
+		raw_local_irq_save(irq_flags);
+
+	watchpoint = insert_watchpoint((unsigned long)ptr, size, is_write);
+	if (watchpoint == NULL) {
+		/*
+		 * Out of capacity: the size of 'watchpoints', and the frequency
+		 * with which should_watch() returns true should be tweaked so
+		 * that this case happens very rarely.
+		 */
+		kcsan_counter_inc(KCSAN_COUNTER_NO_CAPACITY);
+		goto out_unlock;
+	}
+
+	kcsan_counter_inc(KCSAN_COUNTER_SETUP_WATCHPOINTS);
+	kcsan_counter_inc(KCSAN_COUNTER_USED_WATCHPOINTS);
+
+	/*
+	 * Read the current value, to later check and infer a race if the data
+	 * was modified via a non-instrumented access, e.g. from a device.
+	 */
+	expect_value._8 = 0;
+	switch (size) {
+	case 1:
+		expect_value._1 = READ_ONCE(*(const u8 *)ptr);
+		break;
+	case 2:
+		expect_value._2 = READ_ONCE(*(const u16 *)ptr);
+		break;
+	case 4:
+		expect_value._4 = READ_ONCE(*(const u32 *)ptr);
+		break;
+	case 8:
+		expect_value._8 = READ_ONCE(*(const u64 *)ptr);
+		break;
+	default:
+		break; /* ignore; we do not diff the values */
+	}
+
+	if (IS_ENABLED(CONFIG_KCSAN_DEBUG)) {
+		kcsan_disable_current();
+		pr_err("KCSAN: watching %s, size: %zu, addr: %px [slot: %d, encoded: %lx]\n",
+		       is_write ? "write" : "read", size, ptr,
+		       watchpoint_slot((unsigned long)ptr),
+		       encode_watchpoint((unsigned long)ptr, size, is_write));
+		kcsan_enable_current();
+	}
+
+	/*
+	 * Delay this thread, to increase probability of observing a racy
+	 * conflicting access.
+	 */
+	udelay(get_delay());
+
+	/*
+	 * Re-read value, and check if it is as expected; if not, we infer a
+	 * racy access.
+	 */
+	access_mask = get_ctx()->access_mask;
+	switch (size) {
+	case 1:
+		expect_value._1 ^= READ_ONCE(*(const u8 *)ptr);
+		if (access_mask)
+			expect_value._1 &= (u8)access_mask;
+		break;
+	case 2:
+		expect_value._2 ^= READ_ONCE(*(const u16 *)ptr);
+		if (access_mask)
+			expect_value._2 &= (u16)access_mask;
+		break;
+	case 4:
+		expect_value._4 ^= READ_ONCE(*(const u32 *)ptr);
+		if (access_mask)
+			expect_value._4 &= (u32)access_mask;
+		break;
+	case 8:
+		expect_value._8 ^= READ_ONCE(*(const u64 *)ptr);
+		if (access_mask)
+			expect_value._8 &= (u64)access_mask;
+		break;
+	default:
+		break; /* ignore; we do not diff the values */
+	}
+
+	/* Were we able to observe a value-change? */
+	if (expect_value._8 != 0)
+		value_change = KCSAN_VALUE_CHANGE_TRUE;
+
+	/* Check if this access raced with another. */
+	if (!consume_watchpoint(watchpoint)) {
+		/*
+		 * Depending on the access type, map a value_change of MAYBE to
+		 * TRUE (always report) or FALSE (never report).
+		 */
+		if (value_change == KCSAN_VALUE_CHANGE_MAYBE) {
+			if (access_mask != 0) {
+				/*
+				 * For access with access_mask, we require a
+				 * value-change, as it is likely that races on
+				 * ~access_mask bits are expected.
+				 */
+				value_change = KCSAN_VALUE_CHANGE_FALSE;
+			} else if (size > 8 || is_assert) {
+				/* Always assume a value-change. */
+				value_change = KCSAN_VALUE_CHANGE_TRUE;
+			}
+		}
+
+		/*
+		 * No need to increment 'data_races' counter, as the racing
+		 * thread already did.
+		 *
+		 * Count 'assert_failures' for each failed ASSERT access,
+		 * therefore both this thread and the racing thread may
+		 * increment this counter.
+		 */
+		if (is_assert && value_change == KCSAN_VALUE_CHANGE_TRUE)
+			kcsan_counter_inc(KCSAN_COUNTER_ASSERT_FAILURES);
+
+		kcsan_report(ptr, size, type, value_change, KCSAN_REPORT_RACE_SIGNAL,
+			     watchpoint - watchpoints);
+	} else if (value_change == KCSAN_VALUE_CHANGE_TRUE) {
+		/* Inferring a race, since the value should not have changed. */
+
+		kcsan_counter_inc(KCSAN_COUNTER_RACES_UNKNOWN_ORIGIN);
+		if (is_assert)
+			kcsan_counter_inc(KCSAN_COUNTER_ASSERT_FAILURES);
+
+		if (IS_ENABLED(CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN) || is_assert)
+			kcsan_report(ptr, size, type, KCSAN_VALUE_CHANGE_TRUE,
+				     KCSAN_REPORT_RACE_UNKNOWN_ORIGIN,
+				     watchpoint - watchpoints);
+	}
+
+	/*
+	 * Remove watchpoint; must be after reporting, since the slot may be
+	 * reused after this point.
+	 */
+	remove_watchpoint(watchpoint);
+	kcsan_counter_dec(KCSAN_COUNTER_USED_WATCHPOINTS);
+out_unlock:
+	if (!kcsan_interrupt_watcher)
+		raw_local_irq_restore(irq_flags);
+out:
+	user_access_restore(ua_flags);
+}
+
+static __always_inline void check_access(const volatile void *ptr, size_t size,
+					 int type)
+{
+	const bool is_write = (type & KCSAN_ACCESS_WRITE) != 0;
+	atomic_long_t *watchpoint;
+	long encoded_watchpoint;
+
+	/*
+	 * Do nothing for 0 sized check; this comparison will be optimized out
+	 * for constant sized instrumentation (__tsan_{read,write}N).
+	 */
+	if (unlikely(size == 0))
+		return;
+
+	/*
+	 * Avoid user_access_save in fast-path: find_watchpoint is safe without
+	 * user_access_save, as the address that ptr points to is only used to
+	 * check if a watchpoint exists; ptr is never dereferenced.
+	 */
+	watchpoint = find_watchpoint((unsigned long)ptr, size, !is_write,
+				     &encoded_watchpoint);
+	/*
+	 * It is safe to check kcsan_is_enabled() after find_watchpoint in the
+	 * slow-path, as long as no state changes that cause a race to be
+	 * detected and reported have occurred until kcsan_is_enabled() is
+	 * checked.
+	 */
+
+	if (unlikely(watchpoint != NULL))
+		kcsan_found_watchpoint(ptr, size, type, watchpoint,
+				       encoded_watchpoint);
+	else {
+		struct kcsan_ctx *ctx = get_ctx(); /* Call only once in fast-path. */
+
+		if (unlikely(should_watch(ptr, size, type, ctx)))
+			kcsan_setup_watchpoint(ptr, size, type);
+		else if (unlikely(ctx->scoped_accesses.prev))
+			kcsan_check_scoped_accesses();
+	}
+}
+
+/* === Public interface ===================================================== */
+
+void __init kcsan_init(void)
+{
+	BUG_ON(!in_task());
+
+	kcsan_debugfs_init();
+
+	/*
+	 * We are in the init task, and no other tasks should be running;
+	 * WRITE_ONCE without memory barrier is sufficient.
+	 */
+	if (kcsan_early_enable)
+		WRITE_ONCE(kcsan_enabled, true);
+}
+
+/* === Exported interface =================================================== */
+
+void kcsan_disable_current(void)
+{
+	++get_ctx()->disable_count;
+}
+EXPORT_SYMBOL(kcsan_disable_current);
+
+void kcsan_enable_current(void)
+{
+	if (get_ctx()->disable_count-- == 0) {
+		/*
+		 * Warn if kcsan_enable_current() calls are unbalanced with
+		 * kcsan_disable_current() calls, which causes disable_count to
+		 * become negative and should not happen.
+		 */
+		kcsan_disable_current(); /* restore to 0, KCSAN still enabled */
+		kcsan_disable_current(); /* disable to generate warning */
+		WARN(1, "Unbalanced %s()", __func__);
+		kcsan_enable_current();
+	}
+}
+EXPORT_SYMBOL(kcsan_enable_current);
+
+void kcsan_enable_current_nowarn(void)
+{
+	if (get_ctx()->disable_count-- == 0)
+		kcsan_disable_current();
+}
+EXPORT_SYMBOL(kcsan_enable_current_nowarn);
+
+void kcsan_nestable_atomic_begin(void)
+{
+	/*
+	 * Do *not* check and warn if we are in a flat atomic region: nestable
+	 * and flat atomic regions are independent from each other.
+	 * See include/linux/kcsan.h: struct kcsan_ctx comments for more
+	 * comments.
+	 */
+
+	++get_ctx()->atomic_nest_count;
+}
+EXPORT_SYMBOL(kcsan_nestable_atomic_begin);
+
+void kcsan_nestable_atomic_end(void)
+{
+	if (get_ctx()->atomic_nest_count-- == 0) {
+		/*
+		 * Warn if kcsan_nestable_atomic_end() calls are unbalanced with
+		 * kcsan_nestable_atomic_begin() calls, which causes
+		 * atomic_nest_count to become negative and should not happen.
+		 */
+		kcsan_nestable_atomic_begin(); /* restore to 0 */
+		kcsan_disable_current(); /* disable to generate warning */
+		WARN(1, "Unbalanced %s()", __func__);
+		kcsan_enable_current();
+	}
+}
+EXPORT_SYMBOL(kcsan_nestable_atomic_end);
+
+void kcsan_flat_atomic_begin(void)
+{
+	get_ctx()->in_flat_atomic = true;
+}
+EXPORT_SYMBOL(kcsan_flat_atomic_begin);
+
+void kcsan_flat_atomic_end(void)
+{
+	get_ctx()->in_flat_atomic = false;
+}
+EXPORT_SYMBOL(kcsan_flat_atomic_end);
+
+void kcsan_atomic_next(int n)
+{
+	get_ctx()->atomic_next = n;
+}
+EXPORT_SYMBOL(kcsan_atomic_next);
+
+void kcsan_set_access_mask(unsigned long mask)
+{
+	get_ctx()->access_mask = mask;
+}
+EXPORT_SYMBOL(kcsan_set_access_mask);
+
+struct kcsan_scoped_access *
+kcsan_begin_scoped_access(const volatile void *ptr, size_t size, int type,
+			  struct kcsan_scoped_access *sa)
+{
+	struct kcsan_ctx *ctx = get_ctx();
+
+	__kcsan_check_access(ptr, size, type);
+
+	ctx->disable_count++; /* Disable KCSAN, in case list debugging is on. */
+
+	INIT_LIST_HEAD(&sa->list);
+	sa->ptr = ptr;
+	sa->size = size;
+	sa->type = type;
+
+	if (!ctx->scoped_accesses.prev) /* Lazy initialize list head. */
+		INIT_LIST_HEAD(&ctx->scoped_accesses);
+	list_add(&sa->list, &ctx->scoped_accesses);
+
+	ctx->disable_count--;
+	return sa;
+}
+EXPORT_SYMBOL(kcsan_begin_scoped_access);
+
+void kcsan_end_scoped_access(struct kcsan_scoped_access *sa)
+{
+	struct kcsan_ctx *ctx = get_ctx();
+
+	if (WARN(!ctx->scoped_accesses.prev, "Unbalanced %s()?", __func__))
+		return;
+
+	ctx->disable_count++; /* Disable KCSAN, in case list debugging is on. */
+
+	list_del(&sa->list);
+	if (list_empty(&ctx->scoped_accesses))
+		/*
+		 * Ensure we do not enter kcsan_check_scoped_accesses()
+		 * slow-path if unnecessary, and avoids requiring list_empty()
+		 * in the fast-path (to avoid a READ_ONCE() and potential
+		 * uaccess warning).
+		 */
+		ctx->scoped_accesses.prev = NULL;
+
+	ctx->disable_count--;
+
+	__kcsan_check_access(sa->ptr, sa->size, sa->type);
+}
+EXPORT_SYMBOL(kcsan_end_scoped_access);
+
+void __kcsan_check_access(const volatile void *ptr, size_t size, int type)
+{
+	check_access(ptr, size, type);
+}
+EXPORT_SYMBOL(__kcsan_check_access);
+
+/*
+ * KCSAN uses the same instrumentation that is emitted by supported compilers
+ * for ThreadSanitizer (TSAN).
+ *
+ * When enabled, the compiler emits instrumentation calls (the functions
+ * prefixed with "__tsan" below) for all loads and stores that it generated;
+ * inline asm is not instrumented.
+ *
+ * Note that, not all supported compiler versions distinguish aligned/unaligned
+ * accesses, but e.g. recent versions of Clang do. We simply alias the unaligned
+ * version to the generic version, which can handle both.
+ */
+
+#define DEFINE_TSAN_READ_WRITE(size)                                           \
+	void __tsan_read##size(void *ptr)                                      \
+	{                                                                      \
+		check_access(ptr, size, 0);                                    \
+	}                                                                      \
+	EXPORT_SYMBOL(__tsan_read##size);                                      \
+	void __tsan_unaligned_read##size(void *ptr)                            \
+		__alias(__tsan_read##size);                                    \
+	EXPORT_SYMBOL(__tsan_unaligned_read##size);                            \
+	void __tsan_write##size(void *ptr)                                     \
+	{                                                                      \
+		check_access(ptr, size, KCSAN_ACCESS_WRITE);                   \
+	}                                                                      \
+	EXPORT_SYMBOL(__tsan_write##size);                                     \
+	void __tsan_unaligned_write##size(void *ptr)                           \
+		__alias(__tsan_write##size);                                   \
+	EXPORT_SYMBOL(__tsan_unaligned_write##size)
+
+DEFINE_TSAN_READ_WRITE(1);
+DEFINE_TSAN_READ_WRITE(2);
+DEFINE_TSAN_READ_WRITE(4);
+DEFINE_TSAN_READ_WRITE(8);
+DEFINE_TSAN_READ_WRITE(16);
+
+void __tsan_read_range(void *ptr, size_t size)
+{
+	check_access(ptr, size, 0);
+}
+EXPORT_SYMBOL(__tsan_read_range);
+
+void __tsan_write_range(void *ptr, size_t size)
+{
+	check_access(ptr, size, KCSAN_ACCESS_WRITE);
+}
+EXPORT_SYMBOL(__tsan_write_range);
+
+/*
+ * The below are not required by KCSAN, but can still be emitted by the
+ * compiler.
+ */
+void __tsan_func_entry(void *call_pc)
+{
+}
+EXPORT_SYMBOL(__tsan_func_entry);
+void __tsan_func_exit(void)
+{
+}
+EXPORT_SYMBOL(__tsan_func_exit);
+void __tsan_init(void)
+{
+}
+EXPORT_SYMBOL(__tsan_init);
diff --git a/kernel/kcsan/debugfs.c b/kernel/kcsan/debugfs.c
new file mode 100644
index 000000000000..023e49c58d55
--- /dev/null
+++ b/kernel/kcsan/debugfs.c
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/atomic.h>
+#include <linux/bsearch.h>
+#include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/init.h>
+#include <linux/kallsyms.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+
+#include "kcsan.h"
+
+/*
+ * Statistics counters.
+ */
+static atomic_long_t counters[KCSAN_COUNTER_COUNT];
+
+/*
+ * Addresses for filtering functions from reporting. This list can be used as a
+ * whitelist or blacklist.
+ */
+static struct {
+	unsigned long	*addrs;		/* array of addresses */
+	size_t		size;		/* current size */
+	int		used;		/* number of elements used */
+	bool		sorted;		/* if elements are sorted */
+	bool		whitelist;	/* if list is a blacklist or whitelist */
+} report_filterlist = {
+	.addrs		= NULL,
+	.size		= 8,		/* small initial size */
+	.used		= 0,
+	.sorted		= false,
+	.whitelist	= false,	/* default is blacklist */
+};
+static DEFINE_SPINLOCK(report_filterlist_lock);
+
+static const char *counter_to_name(enum kcsan_counter_id id)
+{
+	switch (id) {
+	case KCSAN_COUNTER_USED_WATCHPOINTS:		return "used_watchpoints";
+	case KCSAN_COUNTER_SETUP_WATCHPOINTS:		return "setup_watchpoints";
+	case KCSAN_COUNTER_DATA_RACES:			return "data_races";
+	case KCSAN_COUNTER_ASSERT_FAILURES:		return "assert_failures";
+	case KCSAN_COUNTER_NO_CAPACITY:			return "no_capacity";
+	case KCSAN_COUNTER_REPORT_RACES:		return "report_races";
+	case KCSAN_COUNTER_RACES_UNKNOWN_ORIGIN:	return "races_unknown_origin";
+	case KCSAN_COUNTER_UNENCODABLE_ACCESSES:	return "unencodable_accesses";
+	case KCSAN_COUNTER_ENCODING_FALSE_POSITIVES:	return "encoding_false_positives";
+	case KCSAN_COUNTER_COUNT:
+		BUG();
+	}
+	return NULL;
+}
+
+void kcsan_counter_inc(enum kcsan_counter_id id)
+{
+	atomic_long_inc(&counters[id]);
+}
+
+void kcsan_counter_dec(enum kcsan_counter_id id)
+{
+	atomic_long_dec(&counters[id]);
+}
+
+/*
+ * The microbenchmark allows benchmarking KCSAN core runtime only. To run
+ * multiple threads, pipe 'microbench=<iters>' from multiple tasks into the
+ * debugfs file. This will not generate any conflicts, and tests fast-path only.
+ */
+static noinline void microbenchmark(unsigned long iters)
+{
+	const struct kcsan_ctx ctx_save = current->kcsan_ctx;
+	const bool was_enabled = READ_ONCE(kcsan_enabled);
+	cycles_t cycles;
+
+	/* We may have been called from an atomic region; reset context. */
+	memset(&current->kcsan_ctx, 0, sizeof(current->kcsan_ctx));
+	/*
+	 * Disable to benchmark fast-path for all accesses, and (expected
+	 * negligible) call into slow-path, but never set up watchpoints.
+	 */
+	WRITE_ONCE(kcsan_enabled, false);
+
+	pr_info("KCSAN: %s begin | iters: %lu\n", __func__, iters);
+
+	cycles = get_cycles();
+	while (iters--) {
+		unsigned long addr = iters & ((PAGE_SIZE << 8) - 1);
+		int type = !(iters & 0x7f) ? KCSAN_ACCESS_ATOMIC :
+				(!(iters & 0xf) ? KCSAN_ACCESS_WRITE : 0);
+		__kcsan_check_access((void *)addr, sizeof(long), type);
+	}
+	cycles = get_cycles() - cycles;
+
+	pr_info("KCSAN: %s end   | cycles: %llu\n", __func__, cycles);
+
+	WRITE_ONCE(kcsan_enabled, was_enabled);
+	/* restore context */
+	current->kcsan_ctx = ctx_save;
+}
+
+/*
+ * Simple test to create conflicting accesses. Write 'test=<iters>' to KCSAN's
+ * debugfs file from multiple tasks to generate real conflicts and show reports.
+ */
+static long test_dummy;
+static long test_flags;
+static long test_scoped;
+static noinline void test_thread(unsigned long iters)
+{
+	const long CHANGE_BITS = 0xff00ff00ff00ff00L;
+	const struct kcsan_ctx ctx_save = current->kcsan_ctx;
+	cycles_t cycles;
+
+	/* We may have been called from an atomic region; reset context. */
+	memset(&current->kcsan_ctx, 0, sizeof(current->kcsan_ctx));
+
+	pr_info("KCSAN: %s begin | iters: %lu\n", __func__, iters);
+	pr_info("test_dummy@%px, test_flags@%px, test_scoped@%px,\n",
+		&test_dummy, &test_flags, &test_scoped);
+
+	cycles = get_cycles();
+	while (iters--) {
+		/* These all should generate reports. */
+		__kcsan_check_read(&test_dummy, sizeof(test_dummy));
+		ASSERT_EXCLUSIVE_WRITER(test_dummy);
+		ASSERT_EXCLUSIVE_ACCESS(test_dummy);
+
+		ASSERT_EXCLUSIVE_BITS(test_flags, ~CHANGE_BITS); /* no report */
+		__kcsan_check_read(&test_flags, sizeof(test_flags)); /* no report */
+
+		ASSERT_EXCLUSIVE_BITS(test_flags, CHANGE_BITS); /* report */
+		__kcsan_check_read(&test_flags, sizeof(test_flags)); /* no report */
+
+		/* not actually instrumented */
+		WRITE_ONCE(test_dummy, iters);  /* to observe value-change */
+		__kcsan_check_write(&test_dummy, sizeof(test_dummy));
+
+		test_flags ^= CHANGE_BITS; /* generate value-change */
+		__kcsan_check_write(&test_flags, sizeof(test_flags));
+
+		BUG_ON(current->kcsan_ctx.scoped_accesses.prev);
+		{
+			/* Should generate reports anywhere in this block. */
+			ASSERT_EXCLUSIVE_WRITER_SCOPED(test_scoped);
+			ASSERT_EXCLUSIVE_ACCESS_SCOPED(test_scoped);
+			BUG_ON(!current->kcsan_ctx.scoped_accesses.prev);
+			/* Unrelated accesses. */
+			__kcsan_check_access(&cycles, sizeof(cycles), 0);
+			__kcsan_check_access(&cycles, sizeof(cycles), KCSAN_ACCESS_ATOMIC);
+		}
+		BUG_ON(current->kcsan_ctx.scoped_accesses.prev);
+	}
+	cycles = get_cycles() - cycles;
+
+	pr_info("KCSAN: %s end   | cycles: %llu\n", __func__, cycles);
+
+	/* restore context */
+	current->kcsan_ctx = ctx_save;
+}
+
+static int cmp_filterlist_addrs(const void *rhs, const void *lhs)
+{
+	const unsigned long a = *(const unsigned long *)rhs;
+	const unsigned long b = *(const unsigned long *)lhs;
+
+	return a < b ? -1 : a == b ? 0 : 1;
+}
+
+bool kcsan_skip_report_debugfs(unsigned long func_addr)
+{
+	unsigned long symbolsize, offset;
+	unsigned long flags;
+	bool ret = false;
+
+	if (!kallsyms_lookup_size_offset(func_addr, &symbolsize, &offset))
+		return false;
+	func_addr -= offset; /* Get function start */
+
+	spin_lock_irqsave(&report_filterlist_lock, flags);
+	if (report_filterlist.used == 0)
+		goto out;
+
+	/* Sort array if it is unsorted, and then do a binary search. */
+	if (!report_filterlist.sorted) {
+		sort(report_filterlist.addrs, report_filterlist.used,
+		     sizeof(unsigned long), cmp_filterlist_addrs, NULL);
+		report_filterlist.sorted = true;
+	}
+	ret = !!bsearch(&func_addr, report_filterlist.addrs,
+			report_filterlist.used, sizeof(unsigned long),
+			cmp_filterlist_addrs);
+	if (report_filterlist.whitelist)
+		ret = !ret;
+
+out:
+	spin_unlock_irqrestore(&report_filterlist_lock, flags);
+	return ret;
+}
+
+static void set_report_filterlist_whitelist(bool whitelist)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&report_filterlist_lock, flags);
+	report_filterlist.whitelist = whitelist;
+	spin_unlock_irqrestore(&report_filterlist_lock, flags);
+}
+
+/* Returns 0 on success, error-code otherwise. */
+static ssize_t insert_report_filterlist(const char *func)
+{
+	unsigned long flags;
+	unsigned long addr = kallsyms_lookup_name(func);
+	ssize_t ret = 0;
+
+	if (!addr) {
+		pr_err("KCSAN: could not find function: '%s'\n", func);
+		return -ENOENT;
+	}
+
+	spin_lock_irqsave(&report_filterlist_lock, flags);
+
+	if (report_filterlist.addrs == NULL) {
+		/* initial allocation */
+		report_filterlist.addrs =
+			kmalloc_array(report_filterlist.size,
+				      sizeof(unsigned long), GFP_ATOMIC);
+		if (report_filterlist.addrs == NULL) {
+			ret = -ENOMEM;
+			goto out;
+		}
+	} else if (report_filterlist.used == report_filterlist.size) {
+		/* resize filterlist */
+		size_t new_size = report_filterlist.size * 2;
+		unsigned long *new_addrs =
+			krealloc(report_filterlist.addrs,
+				 new_size * sizeof(unsigned long), GFP_ATOMIC);
+
+		if (new_addrs == NULL) {
+			/* leave filterlist itself untouched */
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		report_filterlist.size = new_size;
+		report_filterlist.addrs = new_addrs;
+	}
+
+	/* Note: deduplicating should be done in userspace. */
+	report_filterlist.addrs[report_filterlist.used++] =
+		kallsyms_lookup_name(func);
+	report_filterlist.sorted = false;
+
+out:
+	spin_unlock_irqrestore(&report_filterlist_lock, flags);
+
+	return ret;
+}
+
+static int show_info(struct seq_file *file, void *v)
+{
+	int i;
+	unsigned long flags;
+
+	/* show stats */
+	seq_printf(file, "enabled: %i\n", READ_ONCE(kcsan_enabled));
+	for (i = 0; i < KCSAN_COUNTER_COUNT; ++i)
+		seq_printf(file, "%s: %ld\n", counter_to_name(i),
+			   atomic_long_read(&counters[i]));
+
+	/* show filter functions, and filter type */
+	spin_lock_irqsave(&report_filterlist_lock, flags);
+	seq_printf(file, "\n%s functions: %s\n",
+		   report_filterlist.whitelist ? "whitelisted" : "blacklisted",
+		   report_filterlist.used == 0 ? "none" : "");
+	for (i = 0; i < report_filterlist.used; ++i)
+		seq_printf(file, " %ps\n", (void *)report_filterlist.addrs[i]);
+	spin_unlock_irqrestore(&report_filterlist_lock, flags);
+
+	return 0;
+}
+
+static int debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, show_info, NULL);
+}
+
+static ssize_t
+debugfs_write(struct file *file, const char __user *buf, size_t count, loff_t *off)
+{
+	char kbuf[KSYM_NAME_LEN];
+	char *arg;
+	int read_len = count < (sizeof(kbuf) - 1) ? count : (sizeof(kbuf) - 1);
+
+	if (copy_from_user(kbuf, buf, read_len))
+		return -EFAULT;
+	kbuf[read_len] = '\0';
+	arg = strstrip(kbuf);
+
+	if (!strcmp(arg, "on")) {
+		WRITE_ONCE(kcsan_enabled, true);
+	} else if (!strcmp(arg, "off")) {
+		WRITE_ONCE(kcsan_enabled, false);
+	} else if (!strncmp(arg, "microbench=", sizeof("microbench=") - 1)) {
+		unsigned long iters;
+
+		if (kstrtoul(&arg[sizeof("microbench=") - 1], 0, &iters))
+			return -EINVAL;
+		microbenchmark(iters);
+	} else if (!strncmp(arg, "test=", sizeof("test=") - 1)) {
+		unsigned long iters;
+
+		if (kstrtoul(&arg[sizeof("test=") - 1], 0, &iters))
+			return -EINVAL;
+		test_thread(iters);
+	} else if (!strcmp(arg, "whitelist")) {
+		set_report_filterlist_whitelist(true);
+	} else if (!strcmp(arg, "blacklist")) {
+		set_report_filterlist_whitelist(false);
+	} else if (arg[0] == '!') {
+		ssize_t ret = insert_report_filterlist(&arg[1]);
+
+		if (ret < 0)
+			return ret;
+	} else {
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations debugfs_ops =
+{
+	.read	 = seq_read,
+	.open	 = debugfs_open,
+	.write	 = debugfs_write,
+	.release = single_release
+};
+
+void __init kcsan_debugfs_init(void)
+{
+	debugfs_create_file("kcsan", 0644, NULL, NULL, &debugfs_ops);
+}
diff --git a/kernel/kcsan/encoding.h b/kernel/kcsan/encoding.h
new file mode 100644
index 000000000000..f03562aaf2eb
--- /dev/null
+++ b/kernel/kcsan/encoding.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _KERNEL_KCSAN_ENCODING_H
+#define _KERNEL_KCSAN_ENCODING_H
+
+#include <linux/bits.h>
+#include <linux/log2.h>
+#include <linux/mm.h>
+
+#include "kcsan.h"
+
+#define SLOT_RANGE PAGE_SIZE
+
+#define INVALID_WATCHPOINT  0
+#define CONSUMED_WATCHPOINT 1
+
+/*
+ * The maximum useful size of accesses for which we set up watchpoints is the
+ * max range of slots we check on an access.
+ */
+#define MAX_ENCODABLE_SIZE (SLOT_RANGE * (1 + KCSAN_CHECK_ADJACENT))
+
+/*
+ * Number of bits we use to store size info.
+ */
+#define WATCHPOINT_SIZE_BITS bits_per(MAX_ENCODABLE_SIZE)
+/*
+ * This encoding for addresses discards the upper (1 for is-write + SIZE_BITS);
+ * however, most 64-bit architectures do not use the full 64-bit address space.
+ * Also, in order for a false positive to be observable 2 things need to happen:
+ *
+ *	1. different addresses but with the same encoded address race;
+ *	2. and both map onto the same watchpoint slots;
+ *
+ * Both these are assumed to be very unlikely. However, in case it still happens
+ * happens, the report logic will filter out the false positive (see report.c).
+ */
+#define WATCHPOINT_ADDR_BITS (BITS_PER_LONG-1 - WATCHPOINT_SIZE_BITS)
+
+/*
+ * Masks to set/retrieve the encoded data.
+ */
+#define WATCHPOINT_WRITE_MASK BIT(BITS_PER_LONG-1)
+#define WATCHPOINT_SIZE_MASK                                                   \
+	GENMASK(BITS_PER_LONG-2, BITS_PER_LONG-2 - WATCHPOINT_SIZE_BITS)
+#define WATCHPOINT_ADDR_MASK                                                   \
+	GENMASK(BITS_PER_LONG-3 - WATCHPOINT_SIZE_BITS, 0)
+
+static inline bool check_encodable(unsigned long addr, size_t size)
+{
+	return size <= MAX_ENCODABLE_SIZE;
+}
+
+static inline long
+encode_watchpoint(unsigned long addr, size_t size, bool is_write)
+{
+	return (long)((is_write ? WATCHPOINT_WRITE_MASK : 0) |
+		      (size << WATCHPOINT_ADDR_BITS) |
+		      (addr & WATCHPOINT_ADDR_MASK));
+}
+
+static __always_inline bool decode_watchpoint(long watchpoint,
+					      unsigned long *addr_masked,
+					      size_t *size,
+					      bool *is_write)
+{
+	if (watchpoint == INVALID_WATCHPOINT ||
+	    watchpoint == CONSUMED_WATCHPOINT)
+		return false;
+
+	*addr_masked =    (unsigned long)watchpoint & WATCHPOINT_ADDR_MASK;
+	*size	     =   ((unsigned long)watchpoint & WATCHPOINT_SIZE_MASK) >> WATCHPOINT_ADDR_BITS;
+	*is_write    = !!((unsigned long)watchpoint & WATCHPOINT_WRITE_MASK);
+
+	return true;
+}
+
+/*
+ * Return watchpoint slot for an address.
+ */
+static __always_inline int watchpoint_slot(unsigned long addr)
+{
+	return (addr / PAGE_SIZE) % CONFIG_KCSAN_NUM_WATCHPOINTS;
+}
+
+static __always_inline bool matching_access(unsigned long addr1, size_t size1,
+					    unsigned long addr2, size_t size2)
+{
+	unsigned long end_range1 = addr1 + size1 - 1;
+	unsigned long end_range2 = addr2 + size2 - 1;
+
+	return addr1 <= end_range2 && addr2 <= end_range1;
+}
+
+#endif /* _KERNEL_KCSAN_ENCODING_H */
diff --git a/kernel/kcsan/kcsan-test.c b/kernel/kcsan/kcsan-test.c
new file mode 100644
index 000000000000..04326cd5a4b2
--- /dev/null
+++ b/kernel/kcsan/kcsan-test.c
@@ -0,0 +1,1067 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KCSAN test with various race scenarious to test runtime behaviour. Since the
+ * interface with which KCSAN's reports are obtained is via the console, this is
+ * the output we should verify. For each test case checks the presence (or
+ * absence) of generated reports. Relies on 'console' tracepoint to capture
+ * reports as they appear in the kernel log.
+ *
+ * Makes use of KUnit for test organization, and the Torture framework for test
+ * thread control.
+ *
+ * Copyright (C) 2020, Google LLC.
+ * Author: Marco Elver <elver@google.com>
+ */
+
+#include <kunit/test.h>
+#include <linux/jiffies.h>
+#include <linux/kcsan-checks.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/seqlock.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/torture.h>
+#include <linux/tracepoint.h>
+#include <linux/types.h>
+#include <trace/events/printk.h>
+
+/* Points to current test-case memory access "kernels". */
+static void (*access_kernels[2])(void);
+
+static struct task_struct **threads; /* Lists of threads. */
+static unsigned long end_time;       /* End time of test. */
+
+/* Report as observed from console. */
+static struct {
+	spinlock_t lock;
+	int nlines;
+	char lines[3][512];
+} observed = {
+	.lock = __SPIN_LOCK_UNLOCKED(observed.lock),
+};
+
+/* Setup test checking loop. */
+static __no_kcsan_or_inline void
+begin_test_checks(void (*func1)(void), void (*func2)(void))
+{
+	kcsan_disable_current();
+
+	/*
+	 * Require at least as long as KCSAN_REPORT_ONCE_IN_MS, to ensure at
+	 * least one race is reported.
+	 */
+	end_time = jiffies + msecs_to_jiffies(CONFIG_KCSAN_REPORT_ONCE_IN_MS + 300);
+
+	/* Signal start; release potential initialization of shared data. */
+	smp_store_release(&access_kernels[0], func1);
+	smp_store_release(&access_kernels[1], func2);
+}
+
+/* End test checking loop. */
+static __no_kcsan_or_inline bool
+end_test_checks(bool stop)
+{
+	if (!stop && time_before(jiffies, end_time)) {
+		/* Continue checking */
+		return false;
+	}
+
+	kcsan_enable_current();
+	return true;
+}
+
+/*
+ * Probe for console output: checks if a race was reported, and obtains observed
+ * lines of interest.
+ */
+__no_kcsan
+static void probe_console(void *ignore, const char *buf, size_t len)
+{
+	unsigned long flags;
+	int nlines;
+
+	/*
+	 * Note that KCSAN reports under a global lock, so we do not risk the
+	 * possibility of having multiple reports interleaved. If that were the
+	 * case, we'd expect tests to fail.
+	 */
+
+	spin_lock_irqsave(&observed.lock, flags);
+	nlines = observed.nlines;
+
+	if (strnstr(buf, "BUG: KCSAN: ", len) && strnstr(buf, "test_", len)) {
+		/*
+		 * KCSAN report and related to the test.
+		 *
+		 * The provided @buf is not NUL-terminated; copy no more than
+		 * @len bytes and let strscpy() add the missing NUL-terminator.
+		 */
+		strscpy(observed.lines[0], buf, min(len + 1, sizeof(observed.lines[0])));
+		nlines = 1;
+	} else if ((nlines == 1 || nlines == 2) && strnstr(buf, "bytes by", len)) {
+		strscpy(observed.lines[nlines++], buf, min(len + 1, sizeof(observed.lines[0])));
+
+		if (strnstr(buf, "race at unknown origin", len)) {
+			if (WARN_ON(nlines != 2))
+				goto out;
+
+			/* No second line of interest. */
+			strcpy(observed.lines[nlines++], "<none>");
+		}
+	}
+
+out:
+	WRITE_ONCE(observed.nlines, nlines); /* Publish new nlines. */
+	spin_unlock_irqrestore(&observed.lock, flags);
+}
+
+/* Check if a report related to the test exists. */
+__no_kcsan
+static bool report_available(void)
+{
+	return READ_ONCE(observed.nlines) == ARRAY_SIZE(observed.lines);
+}
+
+/* Report information we expect in a report. */
+struct expect_report {
+	/* Access information of both accesses. */
+	struct {
+		void *fn;    /* Function pointer to expected function of top frame. */
+		void *addr;  /* Address of access; unchecked if NULL. */
+		size_t size; /* Size of access; unchecked if @addr is NULL. */
+		int type;    /* Access type, see KCSAN_ACCESS definitions. */
+	} access[2];
+};
+
+/* Check observed report matches information in @r. */
+__no_kcsan
+static bool report_matches(const struct expect_report *r)
+{
+	const bool is_assert = (r->access[0].type | r->access[1].type) & KCSAN_ACCESS_ASSERT;
+	bool ret = false;
+	unsigned long flags;
+	typeof(observed.lines) expect;
+	const char *end;
+	char *cur;
+	int i;
+
+	/* Doubled-checked locking. */
+	if (!report_available())
+		return false;
+
+	/* Generate expected report contents. */
+
+	/* Title */
+	cur = expect[0];
+	end = &expect[0][sizeof(expect[0]) - 1];
+	cur += scnprintf(cur, end - cur, "BUG: KCSAN: %s in ",
+			 is_assert ? "assert: race" : "data-race");
+	if (r->access[1].fn) {
+		char tmp[2][64];
+		int cmp;
+
+		/* Expect lexographically sorted function names in title. */
+		scnprintf(tmp[0], sizeof(tmp[0]), "%pS", r->access[0].fn);
+		scnprintf(tmp[1], sizeof(tmp[1]), "%pS", r->access[1].fn);
+		cmp = strcmp(tmp[0], tmp[1]);
+		cur += scnprintf(cur, end - cur, "%ps / %ps",
+				 cmp < 0 ? r->access[0].fn : r->access[1].fn,
+				 cmp < 0 ? r->access[1].fn : r->access[0].fn);
+	} else {
+		scnprintf(cur, end - cur, "%pS", r->access[0].fn);
+		/* The exact offset won't match, remove it. */
+		cur = strchr(expect[0], '+');
+		if (cur)
+			*cur = '\0';
+	}
+
+	/* Access 1 */
+	cur = expect[1];
+	end = &expect[1][sizeof(expect[1]) - 1];
+	if (!r->access[1].fn)
+		cur += scnprintf(cur, end - cur, "race at unknown origin, with ");
+
+	/* Access 1 & 2 */
+	for (i = 0; i < 2; ++i) {
+		const char *const access_type =
+			(r->access[i].type & KCSAN_ACCESS_ASSERT) ?
+				((r->access[i].type & KCSAN_ACCESS_WRITE) ?
+					 "assert no accesses" :
+					 "assert no writes") :
+				((r->access[i].type & KCSAN_ACCESS_WRITE) ?
+					 "write" :
+					 "read");
+		const char *const access_type_aux =
+			(r->access[i].type & KCSAN_ACCESS_ATOMIC) ?
+				" (marked)" :
+				((r->access[i].type & KCSAN_ACCESS_SCOPED) ?
+					 " (scoped)" :
+					 "");
+
+		if (i == 1) {
+			/* Access 2 */
+			cur = expect[2];
+			end = &expect[2][sizeof(expect[2]) - 1];
+
+			if (!r->access[1].fn) {
+				/* Dummy string if no second access is available. */
+				strcpy(cur, "<none>");
+				break;
+			}
+		}
+
+		cur += scnprintf(cur, end - cur, "%s%s to ", access_type,
+				 access_type_aux);
+
+		if (r->access[i].addr) /* Address is optional. */
+			cur += scnprintf(cur, end - cur, "0x%px of %zu bytes",
+					 r->access[i].addr, r->access[i].size);
+	}
+
+	spin_lock_irqsave(&observed.lock, flags);
+	if (!report_available())
+		goto out; /* A new report is being captured. */
+
+	/* Finally match expected output to what we actually observed. */
+	ret = strstr(observed.lines[0], expect[0]) &&
+	      /* Access info may appear in any order. */
+	      ((strstr(observed.lines[1], expect[1]) &&
+		strstr(observed.lines[2], expect[2])) ||
+	       (strstr(observed.lines[1], expect[2]) &&
+		strstr(observed.lines[2], expect[1])));
+out:
+	spin_unlock_irqrestore(&observed.lock, flags);
+	return ret;
+}
+
+/* ===== Test kernels ===== */
+
+static long test_sink;
+static long test_var;
+/* @test_array should be large enough to fall into multiple watchpoint slots. */
+static long test_array[3 * PAGE_SIZE / sizeof(long)];
+static struct {
+	long val[8];
+} test_struct;
+static DEFINE_SEQLOCK(test_seqlock);
+
+/*
+ * Helper to avoid compiler optimizing out reads, and to generate source values
+ * for writes.
+ */
+__no_kcsan
+static noinline void sink_value(long v) { WRITE_ONCE(test_sink, v); }
+
+static noinline void test_kernel_read(void) { sink_value(test_var); }
+
+static noinline void test_kernel_write(void)
+{
+	test_var = READ_ONCE_NOCHECK(test_sink) + 1;
+}
+
+static noinline void test_kernel_write_nochange(void) { test_var = 42; }
+
+/* Suffixed by value-change exception filter. */
+static noinline void test_kernel_write_nochange_rcu(void) { test_var = 42; }
+
+static noinline void test_kernel_read_atomic(void)
+{
+	sink_value(READ_ONCE(test_var));
+}
+
+static noinline void test_kernel_write_atomic(void)
+{
+	WRITE_ONCE(test_var, READ_ONCE_NOCHECK(test_sink) + 1);
+}
+
+__no_kcsan
+static noinline void test_kernel_write_uninstrumented(void) { test_var++; }
+
+static noinline void test_kernel_data_race(void) { data_race(test_var++); }
+
+static noinline void test_kernel_assert_writer(void)
+{
+	ASSERT_EXCLUSIVE_WRITER(test_var);
+}
+
+static noinline void test_kernel_assert_access(void)
+{
+	ASSERT_EXCLUSIVE_ACCESS(test_var);
+}
+
+#define TEST_CHANGE_BITS 0xff00ff00
+
+static noinline void test_kernel_change_bits(void)
+{
+	if (IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) {
+		/*
+		 * Avoid race of unknown origin for this test, just pretend they
+		 * are atomic.
+		 */
+		kcsan_nestable_atomic_begin();
+		test_var ^= TEST_CHANGE_BITS;
+		kcsan_nestable_atomic_end();
+	} else
+		WRITE_ONCE(test_var, READ_ONCE(test_var) ^ TEST_CHANGE_BITS);
+}
+
+static noinline void test_kernel_assert_bits_change(void)
+{
+	ASSERT_EXCLUSIVE_BITS(test_var, TEST_CHANGE_BITS);
+}
+
+static noinline void test_kernel_assert_bits_nochange(void)
+{
+	ASSERT_EXCLUSIVE_BITS(test_var, ~TEST_CHANGE_BITS);
+}
+
+/* To check that scoped assertions do trigger anywhere in scope. */
+static noinline void test_enter_scope(void)
+{
+	int x = 0;
+
+	/* Unrelated accesses to scoped assert. */
+	READ_ONCE(test_sink);
+	kcsan_check_read(&x, sizeof(x));
+}
+
+static noinline void test_kernel_assert_writer_scoped(void)
+{
+	ASSERT_EXCLUSIVE_WRITER_SCOPED(test_var);
+	test_enter_scope();
+}
+
+static noinline void test_kernel_assert_access_scoped(void)
+{
+	ASSERT_EXCLUSIVE_ACCESS_SCOPED(test_var);
+	test_enter_scope();
+}
+
+static noinline void test_kernel_rmw_array(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(test_array); ++i)
+		test_array[i]++;
+}
+
+static noinline void test_kernel_write_struct(void)
+{
+	kcsan_check_write(&test_struct, sizeof(test_struct));
+	kcsan_disable_current();
+	test_struct.val[3]++; /* induce value change */
+	kcsan_enable_current();
+}
+
+static noinline void test_kernel_write_struct_part(void)
+{
+	test_struct.val[3] = 42;
+}
+
+static noinline void test_kernel_read_struct_zero_size(void)
+{
+	kcsan_check_read(&test_struct.val[3], 0);
+}
+
+static noinline void test_kernel_seqlock_reader(void)
+{
+	unsigned int seq;
+
+	do {
+		seq = read_seqbegin(&test_seqlock);
+		sink_value(test_var);
+	} while (read_seqretry(&test_seqlock, seq));
+}
+
+static noinline void test_kernel_seqlock_writer(void)
+{
+	unsigned long flags;
+
+	write_seqlock_irqsave(&test_seqlock, flags);
+	test_var++;
+	write_sequnlock_irqrestore(&test_seqlock, flags);
+}
+
+/* ===== Test cases ===== */
+
+/* Simple test with normal data race. */
+__no_kcsan
+static void test_basic(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_write, &test_var, sizeof(test_var), KCSAN_ACCESS_WRITE },
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+		},
+	};
+	static const struct expect_report never = {
+		.access = {
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+		},
+	};
+	bool match_expect = false;
+	bool match_never = false;
+
+	begin_test_checks(test_kernel_write, test_kernel_read);
+	do {
+		match_expect |= report_matches(&expect);
+		match_never = report_matches(&never);
+	} while (!end_test_checks(match_never));
+	KUNIT_EXPECT_TRUE(test, match_expect);
+	KUNIT_EXPECT_FALSE(test, match_never);
+}
+
+/*
+ * Stress KCSAN with lots of concurrent races on different addresses until
+ * timeout.
+ */
+__no_kcsan
+static void test_concurrent_races(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			/* NULL will match any address. */
+			{ test_kernel_rmw_array, NULL, 0, KCSAN_ACCESS_WRITE },
+			{ test_kernel_rmw_array, NULL, 0, 0 },
+		},
+	};
+	static const struct expect_report never = {
+		.access = {
+			{ test_kernel_rmw_array, NULL, 0, 0 },
+			{ test_kernel_rmw_array, NULL, 0, 0 },
+		},
+	};
+	bool match_expect = false;
+	bool match_never = false;
+
+	begin_test_checks(test_kernel_rmw_array, test_kernel_rmw_array);
+	do {
+		match_expect |= report_matches(&expect);
+		match_never |= report_matches(&never);
+	} while (!end_test_checks(false));
+	KUNIT_EXPECT_TRUE(test, match_expect); /* Sanity check matches exist. */
+	KUNIT_EXPECT_FALSE(test, match_never);
+}
+
+/* Test the KCSAN_REPORT_VALUE_CHANGE_ONLY option. */
+__no_kcsan
+static void test_novalue_change(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_write_nochange, &test_var, sizeof(test_var), KCSAN_ACCESS_WRITE },
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+		},
+	};
+	bool match_expect = false;
+
+	begin_test_checks(test_kernel_write_nochange, test_kernel_read);
+	do {
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	if (IS_ENABLED(CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY))
+		KUNIT_EXPECT_FALSE(test, match_expect);
+	else
+		KUNIT_EXPECT_TRUE(test, match_expect);
+}
+
+/*
+ * Test that the rules where the KCSAN_REPORT_VALUE_CHANGE_ONLY option should
+ * never apply work.
+ */
+__no_kcsan
+static void test_novalue_change_exception(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_write_nochange_rcu, &test_var, sizeof(test_var), KCSAN_ACCESS_WRITE },
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+		},
+	};
+	bool match_expect = false;
+
+	begin_test_checks(test_kernel_write_nochange_rcu, test_kernel_read);
+	do {
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	KUNIT_EXPECT_TRUE(test, match_expect);
+}
+
+/* Test that data races of unknown origin are reported. */
+__no_kcsan
+static void test_unknown_origin(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+			{ NULL },
+		},
+	};
+	bool match_expect = false;
+
+	begin_test_checks(test_kernel_write_uninstrumented, test_kernel_read);
+	do {
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	if (IS_ENABLED(CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN))
+		KUNIT_EXPECT_TRUE(test, match_expect);
+	else
+		KUNIT_EXPECT_FALSE(test, match_expect);
+}
+
+/* Test KCSAN_ASSUME_PLAIN_WRITES_ATOMIC if it is selected. */
+__no_kcsan
+static void test_write_write_assume_atomic(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_write, &test_var, sizeof(test_var), KCSAN_ACCESS_WRITE },
+			{ test_kernel_write, &test_var, sizeof(test_var), KCSAN_ACCESS_WRITE },
+		},
+	};
+	bool match_expect = false;
+
+	begin_test_checks(test_kernel_write, test_kernel_write);
+	do {
+		sink_value(READ_ONCE(test_var)); /* induce value-change */
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	if (IS_ENABLED(CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC))
+		KUNIT_EXPECT_FALSE(test, match_expect);
+	else
+		KUNIT_EXPECT_TRUE(test, match_expect);
+}
+
+/*
+ * Test that data races with writes larger than word-size are always reported,
+ * even if KCSAN_ASSUME_PLAIN_WRITES_ATOMIC is selected.
+ */
+__no_kcsan
+static void test_write_write_struct(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_write_struct, &test_struct, sizeof(test_struct), KCSAN_ACCESS_WRITE },
+			{ test_kernel_write_struct, &test_struct, sizeof(test_struct), KCSAN_ACCESS_WRITE },
+		},
+	};
+	bool match_expect = false;
+
+	begin_test_checks(test_kernel_write_struct, test_kernel_write_struct);
+	do {
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	KUNIT_EXPECT_TRUE(test, match_expect);
+}
+
+/*
+ * Test that data races where only one write is larger than word-size are always
+ * reported, even if KCSAN_ASSUME_PLAIN_WRITES_ATOMIC is selected.
+ */
+__no_kcsan
+static void test_write_write_struct_part(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_write_struct, &test_struct, sizeof(test_struct), KCSAN_ACCESS_WRITE },
+			{ test_kernel_write_struct_part, &test_struct.val[3], sizeof(test_struct.val[3]), KCSAN_ACCESS_WRITE },
+		},
+	};
+	bool match_expect = false;
+
+	begin_test_checks(test_kernel_write_struct, test_kernel_write_struct_part);
+	do {
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	KUNIT_EXPECT_TRUE(test, match_expect);
+}
+
+/* Test that races with atomic accesses never result in reports. */
+__no_kcsan
+static void test_read_atomic_write_atomic(struct kunit *test)
+{
+	bool match_never = false;
+
+	begin_test_checks(test_kernel_read_atomic, test_kernel_write_atomic);
+	do {
+		match_never = report_available();
+	} while (!end_test_checks(match_never));
+	KUNIT_EXPECT_FALSE(test, match_never);
+}
+
+/* Test that a race with an atomic and plain access result in reports. */
+__no_kcsan
+static void test_read_plain_atomic_write(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+			{ test_kernel_write_atomic, &test_var, sizeof(test_var), KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC },
+		},
+	};
+	bool match_expect = false;
+
+	if (IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS))
+		return;
+
+	begin_test_checks(test_kernel_read, test_kernel_write_atomic);
+	do {
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	KUNIT_EXPECT_TRUE(test, match_expect);
+}
+
+/* Zero-sized accesses should never cause data race reports. */
+__no_kcsan
+static void test_zero_size_access(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_write_struct, &test_struct, sizeof(test_struct), KCSAN_ACCESS_WRITE },
+			{ test_kernel_write_struct, &test_struct, sizeof(test_struct), KCSAN_ACCESS_WRITE },
+		},
+	};
+	const struct expect_report never = {
+		.access = {
+			{ test_kernel_write_struct, &test_struct, sizeof(test_struct), KCSAN_ACCESS_WRITE },
+			{ test_kernel_read_struct_zero_size, &test_struct.val[3], 0, 0 },
+		},
+	};
+	bool match_expect = false;
+	bool match_never = false;
+
+	begin_test_checks(test_kernel_write_struct, test_kernel_read_struct_zero_size);
+	do {
+		match_expect |= report_matches(&expect);
+		match_never = report_matches(&never);
+	} while (!end_test_checks(match_never));
+	KUNIT_EXPECT_TRUE(test, match_expect); /* Sanity check. */
+	KUNIT_EXPECT_FALSE(test, match_never);
+}
+
+/* Test the data_race() macro. */
+__no_kcsan
+static void test_data_race(struct kunit *test)
+{
+	bool match_never = false;
+
+	begin_test_checks(test_kernel_data_race, test_kernel_data_race);
+	do {
+		match_never = report_available();
+	} while (!end_test_checks(match_never));
+	KUNIT_EXPECT_FALSE(test, match_never);
+}
+
+__no_kcsan
+static void test_assert_exclusive_writer(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_assert_writer, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT },
+			{ test_kernel_write_nochange, &test_var, sizeof(test_var), KCSAN_ACCESS_WRITE },
+		},
+	};
+	bool match_expect = false;
+
+	begin_test_checks(test_kernel_assert_writer, test_kernel_write_nochange);
+	do {
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	KUNIT_EXPECT_TRUE(test, match_expect);
+}
+
+__no_kcsan
+static void test_assert_exclusive_access(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_assert_access, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT | KCSAN_ACCESS_WRITE },
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+		},
+	};
+	bool match_expect = false;
+
+	begin_test_checks(test_kernel_assert_access, test_kernel_read);
+	do {
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	KUNIT_EXPECT_TRUE(test, match_expect);
+}
+
+__no_kcsan
+static void test_assert_exclusive_access_writer(struct kunit *test)
+{
+	const struct expect_report expect_access_writer = {
+		.access = {
+			{ test_kernel_assert_access, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT | KCSAN_ACCESS_WRITE },
+			{ test_kernel_assert_writer, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT },
+		},
+	};
+	const struct expect_report expect_access_access = {
+		.access = {
+			{ test_kernel_assert_access, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT | KCSAN_ACCESS_WRITE },
+			{ test_kernel_assert_access, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT | KCSAN_ACCESS_WRITE },
+		},
+	};
+	const struct expect_report never = {
+		.access = {
+			{ test_kernel_assert_writer, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT },
+			{ test_kernel_assert_writer, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT },
+		},
+	};
+	bool match_expect_access_writer = false;
+	bool match_expect_access_access = false;
+	bool match_never = false;
+
+	begin_test_checks(test_kernel_assert_access, test_kernel_assert_writer);
+	do {
+		match_expect_access_writer |= report_matches(&expect_access_writer);
+		match_expect_access_access |= report_matches(&expect_access_access);
+		match_never |= report_matches(&never);
+	} while (!end_test_checks(match_never));
+	KUNIT_EXPECT_TRUE(test, match_expect_access_writer);
+	KUNIT_EXPECT_TRUE(test, match_expect_access_access);
+	KUNIT_EXPECT_FALSE(test, match_never);
+}
+
+__no_kcsan
+static void test_assert_exclusive_bits_change(struct kunit *test)
+{
+	const struct expect_report expect = {
+		.access = {
+			{ test_kernel_assert_bits_change, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT },
+			{ test_kernel_change_bits, &test_var, sizeof(test_var),
+				KCSAN_ACCESS_WRITE | (IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS) ? 0 : KCSAN_ACCESS_ATOMIC) },
+		},
+	};
+	bool match_expect = false;
+
+	begin_test_checks(test_kernel_assert_bits_change, test_kernel_change_bits);
+	do {
+		match_expect = report_matches(&expect);
+	} while (!end_test_checks(match_expect));
+	KUNIT_EXPECT_TRUE(test, match_expect);
+}
+
+__no_kcsan
+static void test_assert_exclusive_bits_nochange(struct kunit *test)
+{
+	bool match_never = false;
+
+	begin_test_checks(test_kernel_assert_bits_nochange, test_kernel_change_bits);
+	do {
+		match_never = report_available();
+	} while (!end_test_checks(match_never));
+	KUNIT_EXPECT_FALSE(test, match_never);
+}
+
+__no_kcsan
+static void test_assert_exclusive_writer_scoped(struct kunit *test)
+{
+	const struct expect_report expect_start = {
+		.access = {
+			{ test_kernel_assert_writer_scoped, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT | KCSAN_ACCESS_SCOPED },
+			{ test_kernel_write_nochange, &test_var, sizeof(test_var), KCSAN_ACCESS_WRITE },
+		},
+	};
+	const struct expect_report expect_anywhere = {
+		.access = {
+			{ test_enter_scope, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT | KCSAN_ACCESS_SCOPED },
+			{ test_kernel_write_nochange, &test_var, sizeof(test_var), KCSAN_ACCESS_WRITE },
+		},
+	};
+	bool match_expect_start = false;
+	bool match_expect_anywhere = false;
+
+	begin_test_checks(test_kernel_assert_writer_scoped, test_kernel_write_nochange);
+	do {
+		match_expect_start |= report_matches(&expect_start);
+		match_expect_anywhere |= report_matches(&expect_anywhere);
+	} while (!end_test_checks(match_expect_start && match_expect_anywhere));
+	KUNIT_EXPECT_TRUE(test, match_expect_start);
+	KUNIT_EXPECT_TRUE(test, match_expect_anywhere);
+}
+
+__no_kcsan
+static void test_assert_exclusive_access_scoped(struct kunit *test)
+{
+	const struct expect_report expect_start1 = {
+		.access = {
+			{ test_kernel_assert_access_scoped, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_SCOPED },
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+		},
+	};
+	const struct expect_report expect_start2 = {
+		.access = { expect_start1.access[0], expect_start1.access[0] },
+	};
+	const struct expect_report expect_inscope = {
+		.access = {
+			{ test_enter_scope, &test_var, sizeof(test_var), KCSAN_ACCESS_ASSERT | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_SCOPED },
+			{ test_kernel_read, &test_var, sizeof(test_var), 0 },
+		},
+	};
+	bool match_expect_start = false;
+	bool match_expect_inscope = false;
+
+	begin_test_checks(test_kernel_assert_access_scoped, test_kernel_read);
+	end_time += msecs_to_jiffies(1000); /* This test requires a bit more time. */
+	do {
+		match_expect_start |= report_matches(&expect_start1) || report_matches(&expect_start2);
+		match_expect_inscope |= report_matches(&expect_inscope);
+	} while (!end_test_checks(match_expect_start && match_expect_inscope));
+	KUNIT_EXPECT_TRUE(test, match_expect_start);
+	KUNIT_EXPECT_TRUE(test, match_expect_inscope);
+}
+
+/* Test that racing accesses in seqlock critical sections are not reported. */
+__no_kcsan
+static void test_seqlock_noreport(struct kunit *test)
+{
+	bool match_never = false;
+
+	begin_test_checks(test_kernel_seqlock_reader, test_kernel_seqlock_writer);
+	do {
+		match_never = report_available();
+	} while (!end_test_checks(match_never));
+	KUNIT_EXPECT_FALSE(test, match_never);
+}
+
+/*
+ * Each test case is run with different numbers of threads. Until KUnit supports
+ * passing arguments for each test case, we encode #threads in the test case
+ * name (read by get_num_threads()). [The '-' was chosen as a stylistic
+ * preference to separate test name and #threads.]
+ *
+ * The thread counts are chosen to cover potentially interesting boundaries and
+ * corner cases (range 2-5), and then stress the system with larger counts.
+ */
+#define KCSAN_KUNIT_CASE(test_name)                                            \
+	{ .run_case = test_name, .name = #test_name "-02" },                   \
+	{ .run_case = test_name, .name = #test_name "-03" },                   \
+	{ .run_case = test_name, .name = #test_name "-04" },                   \
+	{ .run_case = test_name, .name = #test_name "-05" },                   \
+	{ .run_case = test_name, .name = #test_name "-08" },                   \
+	{ .run_case = test_name, .name = #test_name "-16" }
+
+static struct kunit_case kcsan_test_cases[] = {
+	KCSAN_KUNIT_CASE(test_basic),
+	KCSAN_KUNIT_CASE(test_concurrent_races),
+	KCSAN_KUNIT_CASE(test_novalue_change),
+	KCSAN_KUNIT_CASE(test_novalue_change_exception),
+	KCSAN_KUNIT_CASE(test_unknown_origin),
+	KCSAN_KUNIT_CASE(test_write_write_assume_atomic),
+	KCSAN_KUNIT_CASE(test_write_write_struct),
+	KCSAN_KUNIT_CASE(test_write_write_struct_part),
+	KCSAN_KUNIT_CASE(test_read_atomic_write_atomic),
+	KCSAN_KUNIT_CASE(test_read_plain_atomic_write),
+	KCSAN_KUNIT_CASE(test_zero_size_access),
+	KCSAN_KUNIT_CASE(test_data_race),
+	KCSAN_KUNIT_CASE(test_assert_exclusive_writer),
+	KCSAN_KUNIT_CASE(test_assert_exclusive_access),
+	KCSAN_KUNIT_CASE(test_assert_exclusive_access_writer),
+	KCSAN_KUNIT_CASE(test_assert_exclusive_bits_change),
+	KCSAN_KUNIT_CASE(test_assert_exclusive_bits_nochange),
+	KCSAN_KUNIT_CASE(test_assert_exclusive_writer_scoped),
+	KCSAN_KUNIT_CASE(test_assert_exclusive_access_scoped),
+	KCSAN_KUNIT_CASE(test_seqlock_noreport),
+	{},
+};
+
+/* ===== End test cases ===== */
+
+/* Get number of threads encoded in test name. */
+static bool __no_kcsan
+get_num_threads(const char *test, int *nthreads)
+{
+	int len = strlen(test);
+
+	if (WARN_ON(len < 3))
+		return false;
+
+	*nthreads = test[len - 1] - '0';
+	*nthreads += (test[len - 2] - '0') * 10;
+
+	if (WARN_ON(*nthreads < 0))
+		return false;
+
+	return true;
+}
+
+/* Concurrent accesses from interrupts. */
+__no_kcsan
+static void access_thread_timer(struct timer_list *timer)
+{
+	static atomic_t cnt = ATOMIC_INIT(0);
+	unsigned int idx;
+	void (*func)(void);
+
+	idx = (unsigned int)atomic_inc_return(&cnt) % ARRAY_SIZE(access_kernels);
+	/* Acquire potential initialization. */
+	func = smp_load_acquire(&access_kernels[idx]);
+	if (func)
+		func();
+}
+
+/* The main loop for each thread. */
+__no_kcsan
+static int access_thread(void *arg)
+{
+	struct timer_list timer;
+	unsigned int cnt = 0;
+	unsigned int idx;
+	void (*func)(void);
+
+	timer_setup_on_stack(&timer, access_thread_timer, 0);
+	do {
+		if (!timer_pending(&timer))
+			mod_timer(&timer, jiffies + 1);
+		else {
+			/* Iterate through all kernels. */
+			idx = cnt++ % ARRAY_SIZE(access_kernels);
+			/* Acquire potential initialization. */
+			func = smp_load_acquire(&access_kernels[idx]);
+			if (func)
+				func();
+		}
+	} while (!torture_must_stop());
+	del_timer_sync(&timer);
+	destroy_timer_on_stack(&timer);
+
+	torture_kthread_stopping("access_thread");
+	return 0;
+}
+
+__no_kcsan
+static int test_init(struct kunit *test)
+{
+	unsigned long flags;
+	int nthreads;
+	int i;
+
+	spin_lock_irqsave(&observed.lock, flags);
+	for (i = 0; i < ARRAY_SIZE(observed.lines); ++i)
+		observed.lines[i][0] = '\0';
+	observed.nlines = 0;
+	spin_unlock_irqrestore(&observed.lock, flags);
+
+	if (!torture_init_begin((char *)test->name, 1))
+		return -EBUSY;
+
+	if (!get_num_threads(test->name, &nthreads))
+		goto err;
+
+	if (WARN_ON(threads))
+		goto err;
+
+	for (i = 0; i < ARRAY_SIZE(access_kernels); ++i) {
+		if (WARN_ON(access_kernels[i]))
+			goto err;
+	}
+
+	if (!IS_ENABLED(CONFIG_PREEMPT) && nthreads > num_online_cpus() - 2) {
+		nthreads = num_online_cpus() - 2;
+		pr_info("%s: limiting number of threads to %d\n", test->name,
+			nthreads);
+	}
+
+	if (nthreads) {
+		threads = kcalloc(nthreads + 1, sizeof(struct task_struct *),
+				  GFP_KERNEL);
+		if (WARN_ON(!threads))
+			goto err;
+
+		threads[nthreads] = NULL;
+		for (i = 0; i < nthreads; ++i) {
+			if (torture_create_kthread(access_thread, NULL,
+						   threads[i]))
+				goto err;
+		}
+	}
+
+	torture_init_end();
+
+	return 0;
+
+err:
+	kfree(threads);
+	threads = NULL;
+	torture_init_end();
+	return -EINVAL;
+}
+
+__no_kcsan
+static void test_exit(struct kunit *test)
+{
+	struct task_struct **stop_thread;
+	int i;
+
+	if (torture_cleanup_begin())
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(access_kernels); ++i)
+		WRITE_ONCE(access_kernels[i], NULL);
+
+	if (threads) {
+		for (stop_thread = threads; *stop_thread; stop_thread++)
+			torture_stop_kthread(reader_thread, *stop_thread);
+
+		kfree(threads);
+		threads = NULL;
+	}
+
+	torture_cleanup_end();
+}
+
+static struct kunit_suite kcsan_test_suite = {
+	.name = "kcsan-test",
+	.test_cases = kcsan_test_cases,
+	.init = test_init,
+	.exit = test_exit,
+};
+static struct kunit_suite *kcsan_test_suites[] = { &kcsan_test_suite, NULL };
+
+__no_kcsan
+static void register_tracepoints(struct tracepoint *tp, void *ignore)
+{
+	check_trace_callback_type_console(probe_console);
+	if (!strcmp(tp->name, "console"))
+		WARN_ON(tracepoint_probe_register(tp, probe_console, NULL));
+}
+
+__no_kcsan
+static void unregister_tracepoints(struct tracepoint *tp, void *ignore)
+{
+	if (!strcmp(tp->name, "console"))
+		tracepoint_probe_unregister(tp, probe_console, NULL);
+}
+
+/*
+ * We only want to do tracepoints setup and teardown once, therefore we have to
+ * customize the init and exit functions and cannot rely on kunit_test_suite().
+ */
+static int __init kcsan_test_init(void)
+{
+	/*
+	 * Because we want to be able to build the test as a module, we need to
+	 * iterate through all known tracepoints, since the static registration
+	 * won't work here.
+	 */
+	for_each_kernel_tracepoint(register_tracepoints, NULL);
+	return __kunit_test_suites_init(kcsan_test_suites);
+}
+
+static void kcsan_test_exit(void)
+{
+	__kunit_test_suites_exit(kcsan_test_suites);
+	for_each_kernel_tracepoint(unregister_tracepoints, NULL);
+	tracepoint_synchronize_unregister();
+}
+
+late_initcall(kcsan_test_init);
+module_exit(kcsan_test_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Marco Elver <elver@google.com>");
diff --git a/kernel/kcsan/kcsan.h b/kernel/kcsan/kcsan.h
new file mode 100644
index 000000000000..763d6d08d94b
--- /dev/null
+++ b/kernel/kcsan/kcsan.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * The Kernel Concurrency Sanitizer (KCSAN) infrastructure. For more info please
+ * see Documentation/dev-tools/kcsan.rst.
+ */
+
+#ifndef _KERNEL_KCSAN_KCSAN_H
+#define _KERNEL_KCSAN_KCSAN_H
+
+#include <linux/kcsan.h>
+
+/* The number of adjacent watchpoints to check. */
+#define KCSAN_CHECK_ADJACENT 1
+#define NUM_SLOTS (1 + 2*KCSAN_CHECK_ADJACENT)
+
+extern unsigned int kcsan_udelay_task;
+extern unsigned int kcsan_udelay_interrupt;
+
+/*
+ * Globally enable and disable KCSAN.
+ */
+extern bool kcsan_enabled;
+
+/*
+ * Initialize debugfs file.
+ */
+void kcsan_debugfs_init(void);
+
+enum kcsan_counter_id {
+	/*
+	 * Number of watchpoints currently in use.
+	 */
+	KCSAN_COUNTER_USED_WATCHPOINTS,
+
+	/*
+	 * Total number of watchpoints set up.
+	 */
+	KCSAN_COUNTER_SETUP_WATCHPOINTS,
+
+	/*
+	 * Total number of data races.
+	 */
+	KCSAN_COUNTER_DATA_RACES,
+
+	/*
+	 * Total number of ASSERT failures due to races. If the observed race is
+	 * due to two conflicting ASSERT type accesses, then both will be
+	 * counted.
+	 */
+	KCSAN_COUNTER_ASSERT_FAILURES,
+
+	/*
+	 * Number of times no watchpoints were available.
+	 */
+	KCSAN_COUNTER_NO_CAPACITY,
+
+	/*
+	 * A thread checking a watchpoint raced with another checking thread;
+	 * only one will be reported.
+	 */
+	KCSAN_COUNTER_REPORT_RACES,
+
+	/*
+	 * Observed data value change, but writer thread unknown.
+	 */
+	KCSAN_COUNTER_RACES_UNKNOWN_ORIGIN,
+
+	/*
+	 * The access cannot be encoded to a valid watchpoint.
+	 */
+	KCSAN_COUNTER_UNENCODABLE_ACCESSES,
+
+	/*
+	 * Watchpoint encoding caused a watchpoint to fire on mismatching
+	 * accesses.
+	 */
+	KCSAN_COUNTER_ENCODING_FALSE_POSITIVES,
+
+	KCSAN_COUNTER_COUNT, /* number of counters */
+};
+
+/*
+ * Increment/decrement counter with given id; avoid calling these in fast-path.
+ */
+extern void kcsan_counter_inc(enum kcsan_counter_id id);
+extern void kcsan_counter_dec(enum kcsan_counter_id id);
+
+/*
+ * Returns true if data races in the function symbol that maps to func_addr
+ * (offsets are ignored) should *not* be reported.
+ */
+extern bool kcsan_skip_report_debugfs(unsigned long func_addr);
+
+/*
+ * Value-change states.
+ */
+enum kcsan_value_change {
+	/*
+	 * Did not observe a value-change, however, it is valid to report the
+	 * race, depending on preferences.
+	 */
+	KCSAN_VALUE_CHANGE_MAYBE,
+
+	/*
+	 * Did not observe a value-change, and it is invalid to report the race.
+	 */
+	KCSAN_VALUE_CHANGE_FALSE,
+
+	/*
+	 * The value was observed to change, and the race should be reported.
+	 */
+	KCSAN_VALUE_CHANGE_TRUE,
+};
+
+enum kcsan_report_type {
+	/*
+	 * The thread that set up the watchpoint and briefly stalled was
+	 * signalled that another thread triggered the watchpoint.
+	 */
+	KCSAN_REPORT_RACE_SIGNAL,
+
+	/*
+	 * A thread found and consumed a matching watchpoint.
+	 */
+	KCSAN_REPORT_CONSUMED_WATCHPOINT,
+
+	/*
+	 * No other thread was observed to race with the access, but the data
+	 * value before and after the stall differs.
+	 */
+	KCSAN_REPORT_RACE_UNKNOWN_ORIGIN,
+};
+
+/*
+ * Print a race report from thread that encountered the race.
+ */
+extern void kcsan_report(const volatile void *ptr, size_t size, int access_type,
+			 enum kcsan_value_change value_change,
+			 enum kcsan_report_type type, int watchpoint_idx);
+
+#endif /* _KERNEL_KCSAN_KCSAN_H */
diff --git a/kernel/kcsan/report.c b/kernel/kcsan/report.c
new file mode 100644
index 000000000000..ac5f8345bae9
--- /dev/null
+++ b/kernel/kcsan/report.c
@@ -0,0 +1,634 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/debug_locks.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/lockdep.h>
+#include <linux/preempt.h>
+#include <linux/printk.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/stacktrace.h>
+
+#include "kcsan.h"
+#include "encoding.h"
+
+/*
+ * Max. number of stack entries to show in the report.
+ */
+#define NUM_STACK_ENTRIES 64
+
+/* Common access info. */
+struct access_info {
+	const volatile void	*ptr;
+	size_t			size;
+	int			access_type;
+	int			task_pid;
+	int			cpu_id;
+};
+
+/*
+ * Other thread info: communicated from other racing thread to thread that set
+ * up the watchpoint, which then prints the complete report atomically.
+ */
+struct other_info {
+	struct access_info	ai;
+	unsigned long		stack_entries[NUM_STACK_ENTRIES];
+	int			num_stack_entries;
+
+	/*
+	 * Optionally pass @current. Typically we do not need to pass @current
+	 * via @other_info since just @task_pid is sufficient. Passing @current
+	 * has additional overhead.
+	 *
+	 * To safely pass @current, we must either use get_task_struct/
+	 * put_task_struct, or stall the thread that populated @other_info.
+	 *
+	 * We cannot rely on get_task_struct/put_task_struct in case
+	 * release_report() races with a task being released, and would have to
+	 * free it in release_report(). This may result in deadlock if we want
+	 * to use KCSAN on the allocators.
+	 *
+	 * Since we also want to reliably print held locks for
+	 * CONFIG_KCSAN_VERBOSE, the current implementation stalls the thread
+	 * that populated @other_info until it has been consumed.
+	 */
+	struct task_struct	*task;
+};
+
+/*
+ * To never block any producers of struct other_info, we need as many elements
+ * as we have watchpoints (upper bound on concurrent races to report).
+ */
+static struct other_info other_infos[CONFIG_KCSAN_NUM_WATCHPOINTS + NUM_SLOTS-1];
+
+/*
+ * Information about reported races; used to rate limit reporting.
+ */
+struct report_time {
+	/*
+	 * The last time the race was reported.
+	 */
+	unsigned long time;
+
+	/*
+	 * The frames of the 2 threads; if only 1 thread is known, one frame
+	 * will be 0.
+	 */
+	unsigned long frame1;
+	unsigned long frame2;
+};
+
+/*
+ * Since we also want to be able to debug allocators with KCSAN, to avoid
+ * deadlock, report_times cannot be dynamically resized with krealloc in
+ * rate_limit_report.
+ *
+ * Therefore, we use a fixed-size array, which at most will occupy a page. This
+ * still adequately rate limits reports, assuming that a) number of unique data
+ * races is not excessive, and b) occurrence of unique races within the
+ * same time window is limited.
+ */
+#define REPORT_TIMES_MAX (PAGE_SIZE / sizeof(struct report_time))
+#define REPORT_TIMES_SIZE                                                      \
+	(CONFIG_KCSAN_REPORT_ONCE_IN_MS > REPORT_TIMES_MAX ?                   \
+		 REPORT_TIMES_MAX :                                            \
+		 CONFIG_KCSAN_REPORT_ONCE_IN_MS)
+static struct report_time report_times[REPORT_TIMES_SIZE];
+
+/*
+ * Spinlock serializing report generation, and access to @other_infos. Although
+ * it could make sense to have a finer-grained locking story for @other_infos,
+ * report generation needs to be serialized either way, so not much is gained.
+ */
+static DEFINE_RAW_SPINLOCK(report_lock);
+
+/*
+ * Checks if the race identified by thread frames frame1 and frame2 has
+ * been reported since (now - KCSAN_REPORT_ONCE_IN_MS).
+ */
+static bool rate_limit_report(unsigned long frame1, unsigned long frame2)
+{
+	struct report_time *use_entry = &report_times[0];
+	unsigned long invalid_before;
+	int i;
+
+	BUILD_BUG_ON(CONFIG_KCSAN_REPORT_ONCE_IN_MS != 0 && REPORT_TIMES_SIZE == 0);
+
+	if (CONFIG_KCSAN_REPORT_ONCE_IN_MS == 0)
+		return false;
+
+	invalid_before = jiffies - msecs_to_jiffies(CONFIG_KCSAN_REPORT_ONCE_IN_MS);
+
+	/* Check if a matching race report exists. */
+	for (i = 0; i < REPORT_TIMES_SIZE; ++i) {
+		struct report_time *rt = &report_times[i];
+
+		/*
+		 * Must always select an entry for use to store info as we
+		 * cannot resize report_times; at the end of the scan, use_entry
+		 * will be the oldest entry, which ideally also happened before
+		 * KCSAN_REPORT_ONCE_IN_MS ago.
+		 */
+		if (time_before(rt->time, use_entry->time))
+			use_entry = rt;
+
+		/*
+		 * Initially, no need to check any further as this entry as well
+		 * as following entries have never been used.
+		 */
+		if (rt->time == 0)
+			break;
+
+		/* Check if entry expired. */
+		if (time_before(rt->time, invalid_before))
+			continue; /* before KCSAN_REPORT_ONCE_IN_MS ago */
+
+		/* Reported recently, check if race matches. */
+		if ((rt->frame1 == frame1 && rt->frame2 == frame2) ||
+		    (rt->frame1 == frame2 && rt->frame2 == frame1))
+			return true;
+	}
+
+	use_entry->time = jiffies;
+	use_entry->frame1 = frame1;
+	use_entry->frame2 = frame2;
+	return false;
+}
+
+/*
+ * Special rules to skip reporting.
+ */
+static bool
+skip_report(enum kcsan_value_change value_change, unsigned long top_frame)
+{
+	/* Should never get here if value_change==FALSE. */
+	WARN_ON_ONCE(value_change == KCSAN_VALUE_CHANGE_FALSE);
+
+	/*
+	 * The first call to skip_report always has value_change==TRUE, since we
+	 * cannot know the value written of an instrumented access. For the 2nd
+	 * call there are 6 cases with CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY:
+	 *
+	 * 1. read watchpoint, conflicting write (value_change==TRUE): report;
+	 * 2. read watchpoint, conflicting write (value_change==MAYBE): skip;
+	 * 3. write watchpoint, conflicting write (value_change==TRUE): report;
+	 * 4. write watchpoint, conflicting write (value_change==MAYBE): skip;
+	 * 5. write watchpoint, conflicting read (value_change==MAYBE): skip;
+	 * 6. write watchpoint, conflicting read (value_change==TRUE): report;
+	 *
+	 * Cases 1-4 are intuitive and expected; case 5 ensures we do not report
+	 * data races where the write may have rewritten the same value; case 6
+	 * is possible either if the size is larger than what we check value
+	 * changes for or the access type is KCSAN_ACCESS_ASSERT.
+	 */
+	if (IS_ENABLED(CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY) &&
+	    value_change == KCSAN_VALUE_CHANGE_MAYBE) {
+		/*
+		 * The access is a write, but the data value did not change.
+		 *
+		 * We opt-out of this filter for certain functions at request of
+		 * maintainers.
+		 */
+		char buf[64];
+		int len = scnprintf(buf, sizeof(buf), "%ps", (void *)top_frame);
+
+		if (!strnstr(buf, "rcu_", len) &&
+		    !strnstr(buf, "_rcu", len) &&
+		    !strnstr(buf, "_srcu", len))
+			return true;
+	}
+
+	return kcsan_skip_report_debugfs(top_frame);
+}
+
+static const char *get_access_type(int type)
+{
+	if (type & KCSAN_ACCESS_ASSERT) {
+		if (type & KCSAN_ACCESS_SCOPED) {
+			if (type & KCSAN_ACCESS_WRITE)
+				return "assert no accesses (scoped)";
+			else
+				return "assert no writes (scoped)";
+		} else {
+			if (type & KCSAN_ACCESS_WRITE)
+				return "assert no accesses";
+			else
+				return "assert no writes";
+		}
+	}
+
+	switch (type) {
+	case 0:
+		return "read";
+	case KCSAN_ACCESS_ATOMIC:
+		return "read (marked)";
+	case KCSAN_ACCESS_WRITE:
+		return "write";
+	case KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
+		return "write (marked)";
+	case KCSAN_ACCESS_SCOPED:
+		return "read (scoped)";
+	case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_ATOMIC:
+		return "read (marked, scoped)";
+	case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_WRITE:
+		return "write (scoped)";
+	case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
+		return "write (marked, scoped)";
+	default:
+		BUG();
+	}
+}
+
+static const char *get_bug_type(int type)
+{
+	return (type & KCSAN_ACCESS_ASSERT) != 0 ? "assert: race" : "data-race";
+}
+
+/* Return thread description: in task or interrupt. */
+static const char *get_thread_desc(int task_id)
+{
+	if (task_id != -1) {
+		static char buf[32]; /* safe: protected by report_lock */
+
+		snprintf(buf, sizeof(buf), "task %i", task_id);
+		return buf;
+	}
+	return "interrupt";
+}
+
+/* Helper to skip KCSAN-related functions in stack-trace. */
+static int get_stack_skipnr(const unsigned long stack_entries[], int num_entries)
+{
+	char buf[64];
+	char *cur;
+	int len, skip;
+
+	for (skip = 0; skip < num_entries; ++skip) {
+		len = scnprintf(buf, sizeof(buf), "%ps", (void *)stack_entries[skip]);
+
+		/* Never show tsan_* or {read,write}_once_size. */
+		if (strnstr(buf, "tsan_", len) ||
+		    strnstr(buf, "_once_size", len))
+			continue;
+
+		cur = strnstr(buf, "kcsan_", len);
+		if (cur) {
+			cur += sizeof("kcsan_") - 1;
+			if (strncmp(cur, "test", sizeof("test") - 1))
+				continue; /* KCSAN runtime function. */
+			/* KCSAN related test. */
+		}
+
+		/*
+		 * No match for runtime functions -- @skip entries to skip to
+		 * get to first frame of interest.
+		 */
+		break;
+	}
+
+	return skip;
+}
+
+/* Compares symbolized strings of addr1 and addr2. */
+static int sym_strcmp(void *addr1, void *addr2)
+{
+	char buf1[64];
+	char buf2[64];
+
+	snprintf(buf1, sizeof(buf1), "%pS", addr1);
+	snprintf(buf2, sizeof(buf2), "%pS", addr2);
+
+	return strncmp(buf1, buf2, sizeof(buf1));
+}
+
+static void print_verbose_info(struct task_struct *task)
+{
+	if (!task)
+		return;
+
+	pr_err("\n");
+	debug_show_held_locks(task);
+	print_irqtrace_events(task);
+}
+
+/*
+ * Returns true if a report was generated, false otherwise.
+ */
+static bool print_report(enum kcsan_value_change value_change,
+			 enum kcsan_report_type type,
+			 const struct access_info *ai,
+			 const struct other_info *other_info)
+{
+	unsigned long stack_entries[NUM_STACK_ENTRIES] = { 0 };
+	int num_stack_entries = stack_trace_save(stack_entries, NUM_STACK_ENTRIES, 1);
+	int skipnr = get_stack_skipnr(stack_entries, num_stack_entries);
+	unsigned long this_frame = stack_entries[skipnr];
+	unsigned long other_frame = 0;
+	int other_skipnr = 0; /* silence uninit warnings */
+
+	/*
+	 * Must check report filter rules before starting to print.
+	 */
+	if (skip_report(KCSAN_VALUE_CHANGE_TRUE, stack_entries[skipnr]))
+		return false;
+
+	if (type == KCSAN_REPORT_RACE_SIGNAL) {
+		other_skipnr = get_stack_skipnr(other_info->stack_entries,
+						other_info->num_stack_entries);
+		other_frame = other_info->stack_entries[other_skipnr];
+
+		/* @value_change is only known for the other thread */
+		if (skip_report(value_change, other_frame))
+			return false;
+	}
+
+	if (rate_limit_report(this_frame, other_frame))
+		return false;
+
+	/* Print report header. */
+	pr_err("==================================================================\n");
+	switch (type) {
+	case KCSAN_REPORT_RACE_SIGNAL: {
+		int cmp;
+
+		/*
+		 * Order functions lexographically for consistent bug titles.
+		 * Do not print offset of functions to keep title short.
+		 */
+		cmp = sym_strcmp((void *)other_frame, (void *)this_frame);
+		pr_err("BUG: KCSAN: %s in %ps / %ps\n",
+		       get_bug_type(ai->access_type | other_info->ai.access_type),
+		       (void *)(cmp < 0 ? other_frame : this_frame),
+		       (void *)(cmp < 0 ? this_frame : other_frame));
+	} break;
+
+	case KCSAN_REPORT_RACE_UNKNOWN_ORIGIN:
+		pr_err("BUG: KCSAN: %s in %pS\n", get_bug_type(ai->access_type),
+		       (void *)this_frame);
+		break;
+
+	default:
+		BUG();
+	}
+
+	pr_err("\n");
+
+	/* Print information about the racing accesses. */
+	switch (type) {
+	case KCSAN_REPORT_RACE_SIGNAL:
+		pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n",
+		       get_access_type(other_info->ai.access_type), other_info->ai.ptr,
+		       other_info->ai.size, get_thread_desc(other_info->ai.task_pid),
+		       other_info->ai.cpu_id);
+
+		/* Print the other thread's stack trace. */
+		stack_trace_print(other_info->stack_entries + other_skipnr,
+				  other_info->num_stack_entries - other_skipnr,
+				  0);
+
+		if (IS_ENABLED(CONFIG_KCSAN_VERBOSE))
+			print_verbose_info(other_info->task);
+
+		pr_err("\n");
+		pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n",
+		       get_access_type(ai->access_type), ai->ptr, ai->size,
+		       get_thread_desc(ai->task_pid), ai->cpu_id);
+		break;
+
+	case KCSAN_REPORT_RACE_UNKNOWN_ORIGIN:
+		pr_err("race at unknown origin, with %s to 0x%px of %zu bytes by %s on cpu %i:\n",
+		       get_access_type(ai->access_type), ai->ptr, ai->size,
+		       get_thread_desc(ai->task_pid), ai->cpu_id);
+		break;
+
+	default:
+		BUG();
+	}
+	/* Print stack trace of this thread. */
+	stack_trace_print(stack_entries + skipnr, num_stack_entries - skipnr,
+			  0);
+
+	if (IS_ENABLED(CONFIG_KCSAN_VERBOSE))
+		print_verbose_info(current);
+
+	/* Print report footer. */
+	pr_err("\n");
+	pr_err("Reported by Kernel Concurrency Sanitizer on:\n");
+	dump_stack_print_info(KERN_DEFAULT);
+	pr_err("==================================================================\n");
+
+	return true;
+}
+
+static void release_report(unsigned long *flags, struct other_info *other_info)
+{
+	if (other_info)
+		/*
+		 * Use size to denote valid/invalid, since KCSAN entirely
+		 * ignores 0-sized accesses.
+		 */
+		other_info->ai.size = 0;
+
+	raw_spin_unlock_irqrestore(&report_lock, *flags);
+}
+
+/*
+ * Sets @other_info->task and awaits consumption of @other_info.
+ *
+ * Precondition: report_lock is held.
+ * Postcondition: report_lock is held.
+ */
+static void set_other_info_task_blocking(unsigned long *flags,
+					 const struct access_info *ai,
+					 struct other_info *other_info)
+{
+	/*
+	 * We may be instrumenting a code-path where current->state is already
+	 * something other than TASK_RUNNING.
+	 */
+	const bool is_running = current->state == TASK_RUNNING;
+	/*
+	 * To avoid deadlock in case we are in an interrupt here and this is a
+	 * race with a task on the same CPU (KCSAN_INTERRUPT_WATCHER), provide a
+	 * timeout to ensure this works in all contexts.
+	 *
+	 * Await approximately the worst case delay of the reporting thread (if
+	 * we are not interrupted).
+	 */
+	int timeout = max(kcsan_udelay_task, kcsan_udelay_interrupt);
+
+	other_info->task = current;
+	do {
+		if (is_running) {
+			/*
+			 * Let lockdep know the real task is sleeping, to print
+			 * the held locks (recall we turned lockdep off, so
+			 * locking/unlocking @report_lock won't be recorded).
+			 */
+			set_current_state(TASK_UNINTERRUPTIBLE);
+		}
+		raw_spin_unlock_irqrestore(&report_lock, *flags);
+		/*
+		 * We cannot call schedule() since we also cannot reliably
+		 * determine if sleeping here is permitted -- see in_atomic().
+		 */
+
+		udelay(1);
+		raw_spin_lock_irqsave(&report_lock, *flags);
+		if (timeout-- < 0) {
+			/*
+			 * Abort. Reset @other_info->task to NULL, since it
+			 * appears the other thread is still going to consume
+			 * it. It will result in no verbose info printed for
+			 * this task.
+			 */
+			other_info->task = NULL;
+			break;
+		}
+		/*
+		 * If invalid, or @ptr nor @current matches, then @other_info
+		 * has been consumed and we may continue. If not, retry.
+		 */
+	} while (other_info->ai.size && other_info->ai.ptr == ai->ptr &&
+		 other_info->task == current);
+	if (is_running)
+		set_current_state(TASK_RUNNING);
+}
+
+/* Populate @other_info; requires that the provided @other_info not in use. */
+static void prepare_report_producer(unsigned long *flags,
+				    const struct access_info *ai,
+				    struct other_info *other_info)
+{
+	raw_spin_lock_irqsave(&report_lock, *flags);
+
+	/*
+	 * The same @other_infos entry cannot be used concurrently, because
+	 * there is a one-to-one mapping to watchpoint slots (@watchpoints in
+	 * core.c), and a watchpoint is only released for reuse after reporting
+	 * is done by the consumer of @other_info. Therefore, it is impossible
+	 * for another concurrent prepare_report_producer() to set the same
+	 * @other_info, and are guaranteed exclusivity for the @other_infos
+	 * entry pointed to by @other_info.
+	 *
+	 * To check this property holds, size should never be non-zero here,
+	 * because every consumer of struct other_info resets size to 0 in
+	 * release_report().
+	 */
+	WARN_ON(other_info->ai.size);
+
+	other_info->ai = *ai;
+	other_info->num_stack_entries = stack_trace_save(other_info->stack_entries, NUM_STACK_ENTRIES, 2);
+
+	if (IS_ENABLED(CONFIG_KCSAN_VERBOSE))
+		set_other_info_task_blocking(flags, ai, other_info);
+
+	raw_spin_unlock_irqrestore(&report_lock, *flags);
+}
+
+/* Awaits producer to fill @other_info and then returns. */
+static bool prepare_report_consumer(unsigned long *flags,
+				    const struct access_info *ai,
+				    struct other_info *other_info)
+{
+
+	raw_spin_lock_irqsave(&report_lock, *flags);
+	while (!other_info->ai.size) { /* Await valid @other_info. */
+		raw_spin_unlock_irqrestore(&report_lock, *flags);
+		cpu_relax();
+		raw_spin_lock_irqsave(&report_lock, *flags);
+	}
+
+	/* Should always have a matching access based on watchpoint encoding. */
+	if (WARN_ON(!matching_access((unsigned long)other_info->ai.ptr & WATCHPOINT_ADDR_MASK, other_info->ai.size,
+				     (unsigned long)ai->ptr & WATCHPOINT_ADDR_MASK, ai->size)))
+		goto discard;
+
+	if (!matching_access((unsigned long)other_info->ai.ptr, other_info->ai.size,
+			     (unsigned long)ai->ptr, ai->size)) {
+		/*
+		 * If the actual accesses to not match, this was a false
+		 * positive due to watchpoint encoding.
+		 */
+		kcsan_counter_inc(KCSAN_COUNTER_ENCODING_FALSE_POSITIVES);
+		goto discard;
+	}
+
+	return true;
+
+discard:
+	release_report(flags, other_info);
+	return false;
+}
+
+/*
+ * Depending on the report type either sets @other_info and returns false, or
+ * awaits @other_info and returns true. If @other_info is not required for the
+ * report type, simply acquires @report_lock and returns true.
+ */
+static noinline bool prepare_report(unsigned long *flags,
+				    enum kcsan_report_type type,
+				    const struct access_info *ai,
+				    struct other_info *other_info)
+{
+	switch (type) {
+	case KCSAN_REPORT_CONSUMED_WATCHPOINT:
+		prepare_report_producer(flags, ai, other_info);
+		return false;
+	case KCSAN_REPORT_RACE_SIGNAL:
+		return prepare_report_consumer(flags, ai, other_info);
+	default:
+		/* @other_info not required; just acquire @report_lock. */
+		raw_spin_lock_irqsave(&report_lock, *flags);
+		return true;
+	}
+}
+
+void kcsan_report(const volatile void *ptr, size_t size, int access_type,
+		  enum kcsan_value_change value_change,
+		  enum kcsan_report_type type, int watchpoint_idx)
+{
+	unsigned long flags = 0;
+	const struct access_info ai = {
+		.ptr		= ptr,
+		.size		= size,
+		.access_type	= access_type,
+		.task_pid	= in_task() ? task_pid_nr(current) : -1,
+		.cpu_id		= raw_smp_processor_id()
+	};
+	struct other_info *other_info = type == KCSAN_REPORT_RACE_UNKNOWN_ORIGIN
+					? NULL : &other_infos[watchpoint_idx];
+
+	kcsan_disable_current();
+	if (WARN_ON(watchpoint_idx < 0 || watchpoint_idx >= ARRAY_SIZE(other_infos)))
+		goto out;
+
+	/*
+	 * With TRACE_IRQFLAGS, lockdep's IRQ trace state becomes corrupted if
+	 * we do not turn off lockdep here; this could happen due to recursion
+	 * into lockdep via KCSAN if we detect a race in utilities used by
+	 * lockdep.
+	 */
+	lockdep_off();
+
+	if (prepare_report(&flags, type, &ai, other_info)) {
+		/*
+		 * Never report if value_change is FALSE, only if we it is
+		 * either TRUE or MAYBE. In case of MAYBE, further filtering may
+		 * be done once we know the full stack trace in print_report().
+		 */
+		bool reported = value_change != KCSAN_VALUE_CHANGE_FALSE &&
+				print_report(value_change, type, &ai, other_info);
+
+		if (reported && panic_on_warn)
+			panic("panic_on_warn set ...\n");
+
+		release_report(&flags, other_info);
+	}
+
+	lockdep_on();
+out:
+	kcsan_enable_current();
+}
diff --git a/kernel/kcsan/test.c b/kernel/kcsan/test.c
new file mode 100644
index 000000000000..d26a052d3383
--- /dev/null
+++ b/kernel/kcsan/test.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/random.h>
+#include <linux/types.h>
+
+#include "encoding.h"
+
+#define ITERS_PER_TEST 2000
+
+/* Test requirements. */
+static bool test_requires(void)
+{
+	/* random should be initialized for the below tests */
+	return prandom_u32() + prandom_u32() != 0;
+}
+
+/*
+ * Test watchpoint encode and decode: check that encoding some access's info,
+ * and then subsequent decode preserves the access's info.
+ */
+static bool test_encode_decode(void)
+{
+	int i;
+
+	for (i = 0; i < ITERS_PER_TEST; ++i) {
+		size_t size = prandom_u32_max(MAX_ENCODABLE_SIZE) + 1;
+		bool is_write = !!prandom_u32_max(2);
+		unsigned long addr;
+
+		prandom_bytes(&addr, sizeof(addr));
+		if (WARN_ON(!check_encodable(addr, size)))
+			return false;
+
+		/* Encode and decode */
+		{
+			const long encoded_watchpoint =
+				encode_watchpoint(addr, size, is_write);
+			unsigned long verif_masked_addr;
+			size_t verif_size;
+			bool verif_is_write;
+
+			/* Check special watchpoints */
+			if (WARN_ON(decode_watchpoint(
+				    INVALID_WATCHPOINT, &verif_masked_addr,
+				    &verif_size, &verif_is_write)))
+				return false;
+			if (WARN_ON(decode_watchpoint(
+				    CONSUMED_WATCHPOINT, &verif_masked_addr,
+				    &verif_size, &verif_is_write)))
+				return false;
+
+			/* Check decoding watchpoint returns same data */
+			if (WARN_ON(!decode_watchpoint(
+				    encoded_watchpoint, &verif_masked_addr,
+				    &verif_size, &verif_is_write)))
+				return false;
+			if (WARN_ON(verif_masked_addr !=
+				    (addr & WATCHPOINT_ADDR_MASK)))
+				goto fail;
+			if (WARN_ON(verif_size != size))
+				goto fail;
+			if (WARN_ON(is_write != verif_is_write))
+				goto fail;
+
+			continue;
+fail:
+			pr_err("%s fail: %s %zu bytes @ %lx -> encoded: %lx -> %s %zu bytes @ %lx\n",
+			       __func__, is_write ? "write" : "read", size,
+			       addr, encoded_watchpoint,
+			       verif_is_write ? "write" : "read", verif_size,
+			       verif_masked_addr);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+/* Test access matching function. */
+static bool test_matching_access(void)
+{
+	if (WARN_ON(!matching_access(10, 1, 10, 1)))
+		return false;
+	if (WARN_ON(!matching_access(10, 2, 11, 1)))
+		return false;
+	if (WARN_ON(!matching_access(10, 1, 9, 2)))
+		return false;
+	if (WARN_ON(matching_access(10, 1, 11, 1)))
+		return false;
+	if (WARN_ON(matching_access(9, 1, 10, 1)))
+		return false;
+
+	/*
+	 * An access of size 0 could match another access, as demonstrated here.
+	 * Rather than add more comparisons to 'matching_access()', which would
+	 * end up in the fast-path for *all* checks, check_access() simply
+	 * returns for all accesses of size 0.
+	 */
+	if (WARN_ON(!matching_access(8, 8, 12, 0)))
+		return false;
+
+	return true;
+}
+
+static int __init kcsan_selftest(void)
+{
+	int passed = 0;
+	int total = 0;
+
+#define RUN_TEST(do_test)                                                      \
+	do {                                                                   \
+		++total;                                                       \
+		if (do_test())                                                 \
+			++passed;                                              \
+		else                                                           \
+			pr_err("KCSAN selftest: " #do_test " failed");         \
+	} while (0)
+
+	RUN_TEST(test_requires);
+	RUN_TEST(test_encode_decode);
+	RUN_TEST(test_matching_access);
+
+	pr_info("KCSAN selftest: %d/%d tests passed\n", passed, total);
+	if (passed != total)
+		panic("KCSAN selftests failed");
+	return 0;
+}
+postcore_initcall(kcsan_selftest);
diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c
index c19c0dad1ebe..ba1d91e868ca 100644
--- a/kernel/kexec_core.c
+++ b/kernel/kexec_core.c
@@ -12,6 +12,7 @@
 #include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/kexec.h>
+#include <linux/memory.h>
 #include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/highmem.h>
@@ -22,10 +23,12 @@
 #include <linux/elf.h>
 #include <linux/elfcore.h>
 #include <linux/utsname.h>
+#include <linux/notifier.h>
 #include <linux/numa.h>
 #include <linux/suspend.h>
 #include <linux/device.h>
 #include <linux/freezer.h>
+#include <linux/pfn.h>
 #include <linux/pm.h>
 #include <linux/cpu.h>
 #include <linux/uaccess.h>
@@ -1219,3 +1222,56 @@ void __weak arch_kexec_protect_crashkres(void)
 
 void __weak arch_kexec_unprotect_crashkres(void)
 {}
+
+/*
+ * If user-space wants to offline memory that is in use by a loaded kexec
+ * image, it should unload the image first.
+ */
+static int mem_remove_cb(struct notifier_block *nb, unsigned long action,
+			 void *data)
+{
+	int rv = NOTIFY_OK, i;
+	struct memory_notify *arg = data;
+	unsigned long pfn = arg->start_pfn;
+	unsigned long nr_segments, sstart, send;
+	unsigned long end_pfn = arg->start_pfn + arg->nr_pages;
+
+	might_sleep();
+
+	if (action != MEM_GOING_OFFLINE)
+		return NOTIFY_DONE;
+
+	mutex_lock(&kexec_mutex);
+	if (kexec_image) {
+		nr_segments = kexec_image->nr_segments;
+
+		for (i = 0; i < nr_segments; i++) {
+			sstart = PFN_DOWN(kexec_image->segment[i].mem);
+			send = PFN_UP(kexec_image->segment[i].mem +
+				      kexec_image->segment[i].memsz);
+
+			if ((pfn <= sstart && sstart < end_pfn) ||
+			    (pfn <= send && send < end_pfn)) {
+				pr_warn("Memory region in use\n");
+				rv = NOTIFY_BAD;
+				break;
+			}
+		}
+	}
+	mutex_unlock(&kexec_mutex);
+
+	return rv;
+}
+
+static struct notifier_block mem_remove_nb = {
+	.notifier_call = mem_remove_cb,
+};
+
+static int __init register_mem_remove_cb(void)
+{
+	if (IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
+		return register_memory_notifier(&mem_remove_nb);
+
+	return 0;
+}
+device_initcall(register_mem_remove_cb);
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 2625c241ac00..ffbe03a45c16 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -892,7 +892,7 @@ static void unoptimize_all_kprobes(void)
 static DEFINE_MUTEX(kprobe_sysctl_mutex);
 int sysctl_kprobes_optimization;
 int proc_kprobes_optimization_handler(struct ctl_table *table, int write,
-				      void __user *buffer, size_t *length,
+				      void *buffer, size_t *length,
 				      loff_t *ppos)
 {
 	int ret;
diff --git a/kernel/kthread.c b/kernel/kthread.c
index bfbfa481be3a..86357cd38eb2 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -1,13 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* Kernel thread helper functions.
  *   Copyright (C) 2004 IBM Corporation, Rusty Russell.
+ *   Copyright (C) 2009 Red Hat, Inc.
  *
  * Creation is done via kthreadd, so that we get a clean environment
  * even if we're invoked from userspace (think modprobe, hotplug cpu,
  * etc.).
  */
 #include <uapi/linux/sched/types.h>
+#include <linux/mm.h>
+#include <linux/mmu_context.h>
 #include <linux/sched.h>
+#include <linux/sched/mm.h>
 #include <linux/sched/task.h>
 #include <linux/kthread.h>
 #include <linux/completion.h>
@@ -25,6 +29,7 @@
 #include <linux/numa.h>
 #include <trace/events/sched.h>
 
+
 static DEFINE_SPINLOCK(kthread_create_lock);
 static LIST_HEAD(kthread_create_list);
 struct task_struct *kthreadd_task;
@@ -47,6 +52,7 @@ struct kthread {
 	unsigned long flags;
 	unsigned int cpu;
 	void *data;
+	mm_segment_t oldfs;
 	struct completion parked;
 	struct completion exited;
 #ifdef CONFIG_BLK_CGROUP
@@ -1203,6 +1209,61 @@ void kthread_destroy_worker(struct kthread_worker *worker)
 }
 EXPORT_SYMBOL(kthread_destroy_worker);
 
+/**
+ * kthread_use_mm - make the calling kthread operate on an address space
+ * @mm: address space to operate on
+ */
+void kthread_use_mm(struct mm_struct *mm)
+{
+	struct mm_struct *active_mm;
+	struct task_struct *tsk = current;
+
+	WARN_ON_ONCE(!(tsk->flags & PF_KTHREAD));
+	WARN_ON_ONCE(tsk->mm);
+
+	task_lock(tsk);
+	active_mm = tsk->active_mm;
+	if (active_mm != mm) {
+		mmgrab(mm);
+		tsk->active_mm = mm;
+	}
+	tsk->mm = mm;
+	switch_mm(active_mm, mm, tsk);
+	task_unlock(tsk);
+#ifdef finish_arch_post_lock_switch
+	finish_arch_post_lock_switch();
+#endif
+
+	if (active_mm != mm)
+		mmdrop(active_mm);
+
+	to_kthread(tsk)->oldfs = get_fs();
+	set_fs(USER_DS);
+}
+EXPORT_SYMBOL_GPL(kthread_use_mm);
+
+/**
+ * kthread_unuse_mm - reverse the effect of kthread_use_mm()
+ * @mm: address space to operate on
+ */
+void kthread_unuse_mm(struct mm_struct *mm)
+{
+	struct task_struct *tsk = current;
+
+	WARN_ON_ONCE(!(tsk->flags & PF_KTHREAD));
+	WARN_ON_ONCE(!tsk->mm);
+
+	set_fs(to_kthread(tsk)->oldfs);
+
+	task_lock(tsk);
+	sync_mm_rss(mm);
+	tsk->mm = NULL;
+	/* active_mm is still 'mm' */
+	enter_lazy_tlb(mm, tsk);
+	task_unlock(tsk);
+}
+EXPORT_SYMBOL_GPL(kthread_unuse_mm);
+
 #ifdef CONFIG_BLK_CGROUP
 /**
  * kthread_associate_blkcg - associate blkcg to current kthread
diff --git a/kernel/latencytop.c b/kernel/latencytop.c
index 8d1c15832e55..166d7bf49666 100644
--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -269,8 +269,8 @@ static int __init init_lstats_procfs(void)
 	return 0;
 }
 
-int sysctl_latencytop(struct ctl_table *table, int write,
-			void __user *buffer, size_t *lenp, loff_t *ppos)
+int sysctl_latencytop(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	int err;
 
diff --git a/kernel/locking/Makefile b/kernel/locking/Makefile
index 45452facff3b..6d11cfb9b41f 100644
--- a/kernel/locking/Makefile
+++ b/kernel/locking/Makefile
@@ -5,6 +5,9 @@ KCOV_INSTRUMENT		:= n
 
 obj-y += mutex.o semaphore.o rwsem.o percpu-rwsem.o
 
+# Avoid recursion lockdep -> KCSAN -> ... -> lockdep.
+KCSAN_SANITIZE_lockdep.o := n
+
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_lockdep.o = $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_lockdep_proc.o = $(CC_FLAGS_FTRACE)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index ac10db66cc63..2fadc2635946 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -489,7 +489,7 @@ struct lock_trace {
 	struct hlist_node	hash_entry;
 	u32			hash;
 	u32			nr_entries;
-	unsigned long		entries[0] __aligned(sizeof(unsigned long));
+	unsigned long		entries[] __aligned(sizeof(unsigned long));
 };
 #define LOCK_TRACE_SIZE_IN_LONGS				\
 	(sizeof(struct lock_trace) / sizeof(unsigned long))
@@ -4399,7 +4399,7 @@ static void print_unlock_imbalance_bug(struct task_struct *curr,
 		curr->comm, task_pid_nr(curr));
 	print_lockdep_cache(lock);
 	pr_cont(") at:\n");
-	print_ip_sym(ip);
+	print_ip_sym(KERN_WARNING, ip);
 	pr_warn("but there are no more locks to release!\n");
 	pr_warn("\nother info that might help us debug this:\n");
 	lockdep_print_held_locks(curr);
@@ -5050,7 +5050,7 @@ static void print_lock_contention_bug(struct task_struct *curr,
 		curr->comm, task_pid_nr(curr));
 	print_lockdep_cache(lock);
 	pr_cont(") at:\n");
-	print_ip_sym(ip);
+	print_ip_sym(KERN_WARNING, ip);
 	pr_warn("but there are no locks held!\n");
 	pr_warn("\nother info that might help us debug this:\n");
 	lockdep_print_held_locks(curr);
diff --git a/kernel/locking/locktorture.c b/kernel/locking/locktorture.c
index 5efbfc68ce99..8ff6f50e06a0 100644
--- a/kernel/locking/locktorture.c
+++ b/kernel/locking/locktorture.c
@@ -631,13 +631,13 @@ static int lock_torture_writer(void *arg)
 		cxt.cur_ops->writelock();
 		if (WARN_ON_ONCE(lock_is_write_held))
 			lwsp->n_lock_fail++;
-		lock_is_write_held = 1;
+		lock_is_write_held = true;
 		if (WARN_ON_ONCE(lock_is_read_held))
 			lwsp->n_lock_fail++; /* rare, but... */
 
 		lwsp->n_lock_acquired++;
 		cxt.cur_ops->write_delay(&rand);
-		lock_is_write_held = 0;
+		lock_is_write_held = false;
 		cxt.cur_ops->writeunlock();
 
 		stutter_wait("lock_torture_writer");
@@ -665,13 +665,13 @@ static int lock_torture_reader(void *arg)
 			schedule_timeout_uninterruptible(1);
 
 		cxt.cur_ops->readlock();
-		lock_is_read_held = 1;
+		lock_is_read_held = true;
 		if (WARN_ON_ONCE(lock_is_write_held))
 			lrsp->n_lock_fail++; /* rare, but... */
 
 		lrsp->n_lock_acquired++;
 		cxt.cur_ops->read_delay(&rand);
-		lock_is_read_held = 0;
+		lock_is_read_held = false;
 		cxt.cur_ops->readunlock();
 
 		stutter_wait("lock_torture_reader");
@@ -686,7 +686,7 @@ static int lock_torture_reader(void *arg)
 static void __torture_print_stats(char *page,
 				  struct lock_stress_stats *statp, bool write)
 {
-	bool fail = 0;
+	bool fail = false;
 	int i, n_stress;
 	long max = 0, min = statp ? statp[0].n_lock_acquired : 0;
 	long long sum = 0;
@@ -904,7 +904,7 @@ static int __init lock_torture_init(void)
 
 	/* Initialize the statistics so that each run gets its own numbers. */
 	if (nwriters_stress) {
-		lock_is_write_held = 0;
+		lock_is_write_held = false;
 		cxt.lwsa = kmalloc_array(cxt.nrealwriters_stress,
 					 sizeof(*cxt.lwsa),
 					 GFP_KERNEL);
@@ -935,7 +935,7 @@ static int __init lock_torture_init(void)
 		}
 
 		if (nreaders_stress) {
-			lock_is_read_held = 0;
+			lock_is_read_held = false;
 			cxt.lrsa = kmalloc_array(cxt.nrealreaders_stress,
 						 sizeof(*cxt.lrsa),
 						 GFP_KERNEL);
diff --git a/kernel/locking/rtmutex-debug.c b/kernel/locking/rtmutex-debug.c
index fd4fe1f5b458..36e69100e8e0 100644
--- a/kernel/locking/rtmutex-debug.c
+++ b/kernel/locking/rtmutex-debug.c
@@ -125,7 +125,7 @@ void debug_rt_mutex_print_deadlock(struct rt_mutex_waiter *waiter)
 
 	printk("\n%s/%d's [blocked] stackdump:\n\n",
 		task->comm, task_pid_nr(task));
-	show_stack(task, NULL);
+	show_stack(task, NULL, KERN_DEFAULT);
 	printk("\n%s/%d's [current] stackdump:\n\n",
 		current->comm, task_pid_nr(current));
 	dump_stack();
diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index c9f090d64f00..cfdd5b93264d 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -141,7 +141,6 @@ static void fixup_rt_mutex_waiters(struct rt_mutex *lock)
  * set up.
  */
 #ifndef CONFIG_DEBUG_RT_MUTEXES
-# define rt_mutex_cmpxchg_relaxed(l,c,n) (cmpxchg_relaxed(&l->owner, c, n) == c)
 # define rt_mutex_cmpxchg_acquire(l,c,n) (cmpxchg_acquire(&l->owner, c, n) == c)
 # define rt_mutex_cmpxchg_release(l,c,n) (cmpxchg_release(&l->owner, c, n) == c)
 
@@ -202,7 +201,6 @@ static inline bool unlock_rt_mutex_safe(struct rt_mutex *lock,
 }
 
 #else
-# define rt_mutex_cmpxchg_relaxed(l,c,n)	(0)
 # define rt_mutex_cmpxchg_acquire(l,c,n)	(0)
 # define rt_mutex_cmpxchg_release(l,c,n)	(0)
 
diff --git a/kernel/module.c b/kernel/module.c
index 646f1e2330d2..d626dc31b37f 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -4,6 +4,9 @@
    Copyright (C) 2001 Rusty Russell, 2002, 2010 Rusty Russell IBM.
 
 */
+
+#define INCLUDE_VERMAGIC
+
 #include <linux/export.h>
 #include <linux/extable.h>
 #include <linux/moduleloader.h>
@@ -1943,7 +1946,6 @@ static void mod_sysfs_teardown(struct module *mod)
 	mod_sysfs_fini(mod);
 }
 
-#ifdef CONFIG_ARCH_HAS_STRICT_MODULE_RWX
 /*
  * LKM RO/NX protection: protect module's text/ro-data
  * from modification and any data from execution.
@@ -1957,6 +1959,14 @@ static void mod_sysfs_teardown(struct module *mod)
  *
  * These values are always page-aligned (as is base)
  */
+
+/*
+ * Since some arches are moving towards PAGE_KERNEL module allocations instead
+ * of PAGE_KERNEL_EXEC, keep frob_text() and module_enable_x() outside of the
+ * CONFIG_STRICT_MODULE_RWX block below because they are needed regardless of
+ * whether we are strict.
+ */
+#ifdef CONFIG_ARCH_HAS_STRICT_MODULE_RWX
 static void frob_text(const struct module_layout *layout,
 		      int (*set_memory)(unsigned long start, int num_pages))
 {
@@ -1966,6 +1976,15 @@ static void frob_text(const struct module_layout *layout,
 		   layout->text_size >> PAGE_SHIFT);
 }
 
+static void module_enable_x(const struct module *mod)
+{
+	frob_text(&mod->core_layout, set_memory_x);
+	frob_text(&mod->init_layout, set_memory_x);
+}
+#else /* !CONFIG_ARCH_HAS_STRICT_MODULE_RWX */
+static void module_enable_x(const struct module *mod) { }
+#endif /* CONFIG_ARCH_HAS_STRICT_MODULE_RWX */
+
 #ifdef CONFIG_STRICT_MODULE_RWX
 static void frob_rodata(const struct module_layout *layout,
 			int (*set_memory)(unsigned long start, int num_pages))
@@ -2036,19 +2055,29 @@ static void module_enable_nx(const struct module *mod)
 	frob_writable_data(&mod->init_layout, set_memory_nx);
 }
 
+static int module_enforce_rwx_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+				       char *secstrings, struct module *mod)
+{
+	const unsigned long shf_wx = SHF_WRITE|SHF_EXECINSTR;
+	int i;
+
+	for (i = 0; i < hdr->e_shnum; i++) {
+		if ((sechdrs[i].sh_flags & shf_wx) == shf_wx)
+			return -ENOEXEC;
+	}
+
+	return 0;
+}
+
 #else /* !CONFIG_STRICT_MODULE_RWX */
+/* module_{enable,disable}_ro() stubs are in module.h */
 static void module_enable_nx(const struct module *mod) { }
-#endif /*  CONFIG_STRICT_MODULE_RWX */
-static void module_enable_x(const struct module *mod)
+static int module_enforce_rwx_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+				       char *secstrings, struct module *mod)
 {
-	frob_text(&mod->core_layout, set_memory_x);
-	frob_text(&mod->init_layout, set_memory_x);
+	return 0;
 }
-#else /* !CONFIG_ARCH_HAS_STRICT_MODULE_RWX */
-static void module_enable_nx(const struct module *mod) { }
-static void module_enable_x(const struct module *mod) { }
-#endif /* CONFIG_ARCH_HAS_STRICT_MODULE_RWX */
-
+#endif /*  CONFIG_STRICT_MODULE_RWX */
 
 #ifdef CONFIG_LIVEPATCH
 /*
@@ -2946,8 +2975,7 @@ static int copy_module_from_user(const void __user *umod, unsigned long len,
 		return err;
 
 	/* Suck in entire file: we'll want most of it. */
-	info->hdr = __vmalloc(info->len,
-			GFP_KERNEL | __GFP_NOWARN, PAGE_KERNEL);
+	info->hdr = __vmalloc(info->len, GFP_KERNEL | __GFP_NOWARN);
 	if (!info->hdr)
 		return -ENOMEM;
 
@@ -3378,6 +3406,11 @@ static struct module *layout_and_allocate(struct load_info *info, int flags)
 	if (err < 0)
 		return ERR_PTR(err);
 
+	err = module_enforce_rwx_sections(info->hdr, info->sechdrs,
+					  info->secstrings, info->mod);
+	if (err < 0)
+		return ERR_PTR(err);
+
 	/* We will do a special allocation for per-cpu sections later. */
 	info->sechdrs[info->index.pcpu].sh_flags &= ~(unsigned long)SHF_ALLOC;
 
diff --git a/kernel/panic.c b/kernel/panic.c
index b69ee9e76cb2..ec6d7d788ce7 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -36,6 +36,14 @@
 #define PANIC_TIMER_STEP 100
 #define PANIC_BLINK_SPD 18
 
+#ifdef CONFIG_SMP
+/*
+ * Should we dump all CPUs backtraces in an oops event?
+ * Defaults to 0, can be changed via sysctl.
+ */
+unsigned int __read_mostly sysctl_oops_all_cpu_backtrace;
+#endif /* CONFIG_SMP */
+
 int panic_on_oops = CONFIG_PANIC_ON_OOPS_VALUE;
 static unsigned long tainted_mask =
 	IS_ENABLED(CONFIG_GCC_PLUGIN_RANDSTRUCT) ? (1 << TAINT_RANDSTRUCT) : 0;
@@ -515,6 +523,9 @@ void oops_enter(void)
 	/* can't trust the integrity of the kernel anymore: */
 	debug_locks_off();
 	do_oops_enter_exit();
+
+	if (sysctl_oops_all_cpu_backtrace)
+		trigger_all_cpu_backtrace();
 }
 
 /*
diff --git a/kernel/params.c b/kernel/params.c
index 8e56f8b12d8f..55c07e3b9903 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -529,7 +529,7 @@ struct module_param_attrs
 {
 	unsigned int num;
 	struct attribute_group grp;
-	struct param_attribute attrs[0];
+	struct param_attribute attrs[];
 };
 
 #ifdef CONFIG_SYSFS
diff --git a/kernel/pid.c b/kernel/pid.c
index c835b844aca7..bd2d8d84bcd1 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -363,6 +363,25 @@ void change_pid(struct task_struct *task, enum pid_type type,
 	attach_pid(task, type);
 }
 
+void exchange_tids(struct task_struct *left, struct task_struct *right)
+{
+	struct pid *pid1 = left->thread_pid;
+	struct pid *pid2 = right->thread_pid;
+	struct hlist_head *head1 = &pid1->tasks[PIDTYPE_PID];
+	struct hlist_head *head2 = &pid2->tasks[PIDTYPE_PID];
+
+	/* Swap the single entry tid lists */
+	hlists_swap_heads_rcu(head1, head2);
+
+	/* Swap the per task_struct pid */
+	rcu_assign_pointer(left->thread_pid, pid2);
+	rcu_assign_pointer(right->thread_pid, pid1);
+
+	/* Swap the cached value */
+	WRITE_ONCE(left->pid, pid_nr(pid2));
+	WRITE_ONCE(right->pid, pid_nr(pid1));
+}
+
 /* transfer_pid is an optimization of attach_pid(new), detach_pid(old) */
 void transfer_pid(struct task_struct *old, struct task_struct *new,
 			   enum pid_type type)
@@ -500,6 +519,23 @@ struct pid *find_ge_pid(int nr, struct pid_namespace *ns)
 	return idr_get_next(&ns->idr, &nr);
 }
 
+struct pid *pidfd_get_pid(unsigned int fd)
+{
+	struct fd f;
+	struct pid *pid;
+
+	f = fdget(fd);
+	if (!f.file)
+		return ERR_PTR(-EBADF);
+
+	pid = pidfd_pid(f.file);
+	if (!IS_ERR(pid))
+		get_pid(pid);
+
+	fdput(f);
+	return pid;
+}
+
 /**
  * pidfd_create() - Create a new pid file descriptor.
  *
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 01f8ba32cc0c..3ccaba5f15c0 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -263,7 +263,7 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
 
 #ifdef CONFIG_CHECKPOINT_RESTORE
 static int pid_ns_ctl_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct pid_namespace *pid_ns = task_active_pid_ns(current);
 	struct ctl_table tmp = *table;
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 86aba8706b16..30bd28d1d418 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -898,6 +898,13 @@ static int software_resume(void)
 	error = freeze_processes();
 	if (error)
 		goto Close_Finish;
+
+	error = freeze_kernel_threads();
+	if (error) {
+		thaw_processes();
+		goto Close_Finish;
+	}
+
 	error = load_image_and_restore();
 	thaw_processes();
  Finish:
diff --git a/kernel/printk/console_cmdline.h b/kernel/printk/console_cmdline.h
index 11f19c466af5..3ca74ad391d6 100644
--- a/kernel/printk/console_cmdline.h
+++ b/kernel/printk/console_cmdline.h
@@ -6,6 +6,7 @@ struct console_cmdline
 {
 	char	name[16];			/* Name of the driver	    */
 	int	index;				/* Minor dev. to use	    */
+	bool	user_specified;			/* Specified by command line vs. platform */
 	char	*options;			/* Options for the driver   */
 #ifdef CONFIG_A11Y_BRAILLE_CONSOLE
 	char	*brl_options;			/* Options for braille driver */
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 9a9b6156270b..6ede4a7222e6 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -173,7 +173,7 @@ __setup("printk.devkmsg=", control_devkmsg);
 char devkmsg_log_str[DEVKMSG_STR_MAX_SIZE] = "ratelimit";
 
 int devkmsg_sysctl_set_loglvl(struct ctl_table *table, int write,
-			      void __user *buffer, size_t *lenp, loff_t *ppos)
+			      void *buffer, size_t *lenp, loff_t *ppos)
 {
 	char old_str[DEVKMSG_STR_MAX_SIZE];
 	unsigned int old;
@@ -280,6 +280,7 @@ static struct console *exclusive_console;
 static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES];
 
 static int preferred_console = -1;
+static bool has_preferred_console;
 int console_set_on_cmdline;
 EXPORT_SYMBOL(console_set_on_cmdline);
 
@@ -2140,7 +2141,7 @@ asmlinkage __visible void early_printk(const char *fmt, ...)
 #endif
 
 static int __add_preferred_console(char *name, int idx, char *options,
-				   char *brl_options)
+				   char *brl_options, bool user_specified)
 {
 	struct console_cmdline *c;
 	int i;
@@ -2155,6 +2156,8 @@ static int __add_preferred_console(char *name, int idx, char *options,
 		if (strcmp(c->name, name) == 0 && c->index == idx) {
 			if (!brl_options)
 				preferred_console = i;
+			if (user_specified)
+				c->user_specified = true;
 			return 0;
 		}
 	}
@@ -2164,6 +2167,7 @@ static int __add_preferred_console(char *name, int idx, char *options,
 		preferred_console = i;
 	strlcpy(c->name, name, sizeof(c->name));
 	c->options = options;
+	c->user_specified = user_specified;
 	braille_set_options(c, brl_options);
 
 	c->index = idx;
@@ -2218,7 +2222,7 @@ static int __init console_setup(char *str)
 	idx = simple_strtoul(s, NULL, 10);
 	*s = 0;
 
-	__add_preferred_console(buf, idx, options, brl_options);
+	__add_preferred_console(buf, idx, options, brl_options, true);
 	console_set_on_cmdline = 1;
 	return 1;
 }
@@ -2239,7 +2243,7 @@ __setup("console=", console_setup);
  */
 int add_preferred_console(char *name, int idx, char *options)
 {
-	return __add_preferred_console(name, idx, options, NULL);
+	return __add_preferred_console(name, idx, options, NULL, false);
 }
 
 bool console_suspend_enabled = true;
@@ -2438,9 +2442,9 @@ void console_unlock(void)
 		printk_safe_enter_irqsave(flags);
 		raw_spin_lock(&logbuf_lock);
 		if (console_seq < log_first_seq) {
-			len = sprintf(text,
-				      "** %llu printk messages dropped **\n",
-				      log_first_seq - console_seq);
+			len = snprintf(text, sizeof(text),
+				       "** %llu printk messages dropped **\n",
+				       log_first_seq - console_seq);
 
 			/* messages are gone, move to first one */
 			console_seq = log_first_seq;
@@ -2651,6 +2655,63 @@ static int __init keep_bootcon_setup(char *str)
 
 early_param("keep_bootcon", keep_bootcon_setup);
 
+/*
+ * This is called by register_console() to try to match
+ * the newly registered console with any of the ones selected
+ * by either the command line or add_preferred_console() and
+ * setup/enable it.
+ *
+ * Care need to be taken with consoles that are statically
+ * enabled such as netconsole
+ */
+static int try_enable_new_console(struct console *newcon, bool user_specified)
+{
+	struct console_cmdline *c;
+	int i;
+
+	for (i = 0, c = console_cmdline;
+	     i < MAX_CMDLINECONSOLES && c->name[0];
+	     i++, c++) {
+		if (c->user_specified != user_specified)
+			continue;
+		if (!newcon->match ||
+		    newcon->match(newcon, c->name, c->index, c->options) != 0) {
+			/* default matching */
+			BUILD_BUG_ON(sizeof(c->name) != sizeof(newcon->name));
+			if (strcmp(c->name, newcon->name) != 0)
+				continue;
+			if (newcon->index >= 0 &&
+			    newcon->index != c->index)
+				continue;
+			if (newcon->index < 0)
+				newcon->index = c->index;
+
+			if (_braille_register_console(newcon, c))
+				return 0;
+
+			if (newcon->setup &&
+			    newcon->setup(newcon, c->options) != 0)
+				return -EIO;
+		}
+		newcon->flags |= CON_ENABLED;
+		if (i == preferred_console) {
+			newcon->flags |= CON_CONSDEV;
+			has_preferred_console = true;
+		}
+		return 0;
+	}
+
+	/*
+	 * Some consoles, such as pstore and netconsole, can be enabled even
+	 * without matching. Accept the pre-enabled consoles only when match()
+	 * and setup() had a change to be called.
+	 */
+	if (newcon->flags & CON_ENABLED && c->user_specified ==	user_specified)
+		return 0;
+
+	return -ENOENT;
+}
+
 /*
  * The console driver calls this routine during kernel initialization
  * to register the console printing procedure with printk() and to
@@ -2672,11 +2733,9 @@ early_param("keep_bootcon", keep_bootcon_setup);
  */
 void register_console(struct console *newcon)
 {
-	int i;
 	unsigned long flags;
 	struct console *bcon = NULL;
-	struct console_cmdline *c;
-	static bool has_preferred;
+	int err;
 
 	for_each_console(bcon) {
 		if (WARN(bcon == newcon, "console '%s%d' already registered\n",
@@ -2701,15 +2760,15 @@ void register_console(struct console *newcon)
 	if (console_drivers && console_drivers->flags & CON_BOOT)
 		bcon = console_drivers;
 
-	if (!has_preferred || bcon || !console_drivers)
-		has_preferred = preferred_console >= 0;
+	if (!has_preferred_console || bcon || !console_drivers)
+		has_preferred_console = preferred_console >= 0;
 
 	/*
 	 *	See if we want to use this console driver. If we
 	 *	didn't select a console we take the first one
 	 *	that registers here.
 	 */
-	if (!has_preferred) {
+	if (!has_preferred_console) {
 		if (newcon->index < 0)
 			newcon->index = 0;
 		if (newcon->setup == NULL ||
@@ -2717,47 +2776,20 @@ void register_console(struct console *newcon)
 			newcon->flags |= CON_ENABLED;
 			if (newcon->device) {
 				newcon->flags |= CON_CONSDEV;
-				has_preferred = true;
+				has_preferred_console = true;
 			}
 		}
 	}
 
-	/*
-	 *	See if this console matches one we selected on
-	 *	the command line.
-	 */
-	for (i = 0, c = console_cmdline;
-	     i < MAX_CMDLINECONSOLES && c->name[0];
-	     i++, c++) {
-		if (!newcon->match ||
-		    newcon->match(newcon, c->name, c->index, c->options) != 0) {
-			/* default matching */
-			BUILD_BUG_ON(sizeof(c->name) != sizeof(newcon->name));
-			if (strcmp(c->name, newcon->name) != 0)
-				continue;
-			if (newcon->index >= 0 &&
-			    newcon->index != c->index)
-				continue;
-			if (newcon->index < 0)
-				newcon->index = c->index;
-
-			if (_braille_register_console(newcon, c))
-				return;
-
-			if (newcon->setup &&
-			    newcon->setup(newcon, c->options) != 0)
-				break;
-		}
+	/* See if this console matches one we selected on the command line */
+	err = try_enable_new_console(newcon, true);
 
-		newcon->flags |= CON_ENABLED;
-		if (i == preferred_console) {
-			newcon->flags |= CON_CONSDEV;
-			has_preferred = true;
-		}
-		break;
-	}
+	/* If not, try to match against the platform default(s) */
+	if (err == -ENOENT)
+		err = try_enable_new_console(newcon, false);
 
-	if (!(newcon->flags & CON_ENABLED))
+	/* printk() messages are not printed to the Braille console. */
+	if (err || newcon->flags & CON_BRL)
 		return;
 
 	/*
@@ -2779,6 +2811,8 @@ void register_console(struct console *newcon)
 		console_drivers = newcon;
 		if (newcon->next)
 			newcon->next->flags &= ~CON_CONSDEV;
+		/* Ensure this flag is always set for the head of the list */
+		newcon->flags |= CON_CONSDEV;
 	} else {
 		newcon->next = console_drivers->next;
 		console_drivers->next = newcon;
diff --git a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
index 1cc940fef17c..0ebe15a84985 100644
--- a/kernel/rcu/Kconfig
+++ b/kernel/rcu/Kconfig
@@ -70,13 +70,37 @@ config TREE_SRCU
 	help
 	  This option selects the full-fledged version of SRCU.
 
+config TASKS_RCU_GENERIC
+	def_bool TASKS_RCU || TASKS_RUDE_RCU || TASKS_TRACE_RCU
+	select SRCU
+	help
+	  This option enables generic infrastructure code supporting
+	  task-based RCU implementations.  Not for manual selection.
+
 config TASKS_RCU
 	def_bool PREEMPTION
-	select SRCU
 	help
 	  This option enables a task-based RCU implementation that uses
 	  only voluntary context switch (not preemption!), idle, and
-	  user-mode execution as quiescent states.
+	  user-mode execution as quiescent states.  Not for manual selection.
+
+config TASKS_RUDE_RCU
+	def_bool 0
+	help
+	  This option enables a task-based RCU implementation that uses
+	  only context switch (including preemption) and user-mode
+	  execution as quiescent states.  It forces IPIs and context
+	  switches on all online CPUs, including idle ones, so use
+	  with caution.
+
+config TASKS_TRACE_RCU
+	def_bool 0
+	help
+	  This option enables a task-based RCU implementation that uses
+	  explicit rcu_read_lock_trace() read-side markers, and allows
+	  these readers to appear in the idle loop as well as on the CPU
+	  hotplug code paths.  It can force IPIs on online CPUs, including
+	  idle ones, so use with caution.
 
 config RCU_STALL_COMMON
 	def_bool TREE_RCU
@@ -210,4 +234,22 @@ config RCU_NOCB_CPU
 	  Say Y here if you want to help to debug reduced OS jitter.
 	  Say N here if you are unsure.
 
+config TASKS_TRACE_RCU_READ_MB
+	bool "Tasks Trace RCU readers use memory barriers in user and idle"
+	depends on RCU_EXPERT
+	default PREEMPT_RT || NR_CPUS < 8
+	help
+	  Use this option to further reduce the number of IPIs sent
+	  to CPUs executing in userspace or idle during tasks trace
+	  RCU grace periods.  Given that a reasonable setting of
+	  the rcupdate.rcu_task_ipi_delay kernel boot parameter
+	  eliminates such IPIs for many workloads, proper setting
+	  of this Kconfig option is important mostly for aggressive
+	  real-time installations and for battery-powered devices,
+	  hence the default chosen above.
+
+	  Say Y here if you hate IPIs.
+	  Say N here if you hate read-side memory barriers.
+	  Take the default if you are unsure.
+
 endmenu # "RCU Subsystem"
diff --git a/kernel/rcu/Kconfig.debug b/kernel/rcu/Kconfig.debug
index 4aa02eee8f6c..a4db41d9a401 100644
--- a/kernel/rcu/Kconfig.debug
+++ b/kernel/rcu/Kconfig.debug
@@ -9,15 +9,10 @@ config PROVE_RCU
 	def_bool PROVE_LOCKING
 
 config PROVE_RCU_LIST
-	bool "RCU list lockdep debugging"
-	depends on PROVE_RCU && RCU_EXPERT
-	default n
+	def_bool PROVE_RCU
 	help
-	  Enable RCU lockdep checking for list usages. By default it is
-	  turned off since there are several list RCU users that still
-	  need to be converted to pass a lockdep expression. To prevent
-	  false-positive splats, we keep it default disabled but once all
-	  users are converted, we can remove this config option.
+	  Enable RCU lockdep checking for list usages. It is default
+	  enabled with CONFIG_PROVE_RCU.
 
 config TORTURE_TEST
 	tristate
@@ -29,6 +24,8 @@ config RCU_PERF_TEST
 	select TORTURE_TEST
 	select SRCU
 	select TASKS_RCU
+	select TASKS_RUDE_RCU
+	select TASKS_TRACE_RCU
 	default n
 	help
 	  This option provides a kernel module that runs performance
@@ -46,6 +43,8 @@ config RCU_TORTURE_TEST
 	select TORTURE_TEST
 	select SRCU
 	select TASKS_RCU
+	select TASKS_RUDE_RCU
+	select TASKS_TRACE_RCU
 	default n
 	help
 	  This option provides a kernel module that runs torture tests
diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h
index 00ddc92c5774..cf66a3ccd757 100644
--- a/kernel/rcu/rcu.h
+++ b/kernel/rcu/rcu.h
@@ -431,6 +431,7 @@ bool rcu_gp_is_expedited(void);  /* Internal RCU use. */
 void rcu_expedite_gp(void);
 void rcu_unexpedite_gp(void);
 void rcupdate_announce_bootup_oddness(void);
+void show_rcu_tasks_gp_kthreads(void);
 void rcu_request_urgent_qs_task(struct task_struct *t);
 #endif /* #else #ifdef CONFIG_TINY_RCU */
 
@@ -441,6 +442,8 @@ void rcu_request_urgent_qs_task(struct task_struct *t);
 enum rcutorture_type {
 	RCU_FLAVOR,
 	RCU_TASKS_FLAVOR,
+	RCU_TASKS_RUDE_FLAVOR,
+	RCU_TASKS_TRACING_FLAVOR,
 	RCU_TRIVIAL_FLAVOR,
 	SRCU_FLAVOR,
 	INVALID_RCU_FLAVOR
@@ -454,6 +457,7 @@ void do_trace_rcu_torture_read(const char *rcutorturename,
 			       unsigned long secs,
 			       unsigned long c_old,
 			       unsigned long c);
+void rcu_gp_set_torture_wait(int duration);
 #else
 static inline void rcutorture_get_gp_data(enum rcutorture_type test_type,
 					  int *flags, unsigned long *gp_seq)
@@ -471,6 +475,7 @@ void do_trace_rcu_torture_read(const char *rcutorturename,
 #define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
 	do { } while (0)
 #endif
+static inline void rcu_gp_set_torture_wait(int duration) { }
 #endif
 
 #if IS_ENABLED(CONFIG_RCU_TORTURE_TEST) || IS_MODULE(CONFIG_RCU_TORTURE_TEST)
@@ -498,6 +503,7 @@ void srcutorture_get_gp_data(enum rcutorture_type test_type,
 #endif
 
 #ifdef CONFIG_TINY_RCU
+static inline bool rcu_dynticks_zero_in_eqs(int cpu, int *vp) { return false; }
 static inline unsigned long rcu_get_gp_seq(void) { return 0; }
 static inline unsigned long rcu_exp_batches_completed(void) { return 0; }
 static inline unsigned long
@@ -507,6 +513,7 @@ static inline void show_rcu_gp_kthreads(void) { }
 static inline int rcu_get_gp_kthreads_prio(void) { return 0; }
 static inline void rcu_fwd_progress_check(unsigned long j) { }
 #else /* #ifdef CONFIG_TINY_RCU */
+bool rcu_dynticks_zero_in_eqs(int cpu, int *vp);
 unsigned long rcu_get_gp_seq(void);
 unsigned long rcu_exp_batches_completed(void);
 unsigned long srcu_batches_completed(struct srcu_struct *sp);
diff --git a/kernel/rcu/rcuperf.c b/kernel/rcu/rcuperf.c
index a4a8d097d84d..16dd1e6b7c09 100644
--- a/kernel/rcu/rcuperf.c
+++ b/kernel/rcu/rcuperf.c
@@ -88,6 +88,7 @@ torture_param(bool, shutdown, RCUPERF_SHUTDOWN,
 torture_param(int, verbose, 1, "Enable verbose debugging printk()s");
 torture_param(int, writer_holdoff, 0, "Holdoff (us) between GPs, zero to disable");
 torture_param(int, kfree_rcu_test, 0, "Do we run a kfree_rcu() perf test?");
+torture_param(int, kfree_mult, 1, "Multiple of kfree_obj size to allocate.");
 
 static char *perf_type = "rcu";
 module_param(perf_type, charp, 0444);
@@ -635,7 +636,7 @@ kfree_perf_thread(void *arg)
 		}
 
 		for (i = 0; i < kfree_alloc_num; i++) {
-			alloc_ptr = kmalloc(sizeof(struct kfree_obj), GFP_KERNEL);
+			alloc_ptr = kmalloc(kfree_mult * sizeof(struct kfree_obj), GFP_KERNEL);
 			if (!alloc_ptr)
 				return -ENOMEM;
 
@@ -722,6 +723,8 @@ kfree_perf_init(void)
 		schedule_timeout_uninterruptible(1);
 	}
 
+	pr_alert("kfree object size=%lu\n", kfree_mult * sizeof(struct kfree_obj));
+
 	kfree_reader_tasks = kcalloc(kfree_nrealthreads, sizeof(kfree_reader_tasks[0]),
 			       GFP_KERNEL);
 	if (kfree_reader_tasks == NULL) {
diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index 5453bd557f43..269881e51dc6 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -7,7 +7,7 @@
  * Authors: Paul E. McKenney <paulmck@linux.ibm.com>
  *	  Josh Triplett <josh@joshtriplett.org>
  *
- * See also:  Documentation/RCU/torture.txt
+ * See also:  Documentation/RCU/torture.rst
  */
 
 #define pr_fmt(fmt) fmt
@@ -20,7 +20,7 @@
 #include <linux/err.h>
 #include <linux/spinlock.h>
 #include <linux/smp.h>
-#include <linux/rcupdate.h>
+#include <linux/rcupdate_wait.h>
 #include <linux/interrupt.h>
 #include <linux/sched/signal.h>
 #include <uapi/linux/sched/types.h>
@@ -45,12 +45,25 @@
 #include <linux/sched/sysctl.h>
 #include <linux/oom.h>
 #include <linux/tick.h>
+#include <linux/rcupdate_trace.h>
 
 #include "rcu.h"
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Paul E. McKenney <paulmck@linux.ibm.com> and Josh Triplett <josh@joshtriplett.org>");
 
+#ifndef data_race
+#define data_race(expr)							\
+	({								\
+		expr;							\
+	})
+#endif
+#ifndef ASSERT_EXCLUSIVE_WRITER
+#define ASSERT_EXCLUSIVE_WRITER(var) do { } while (0)
+#endif
+#ifndef ASSERT_EXCLUSIVE_ACCESS
+#define ASSERT_EXCLUSIVE_ACCESS(var) do { } while (0)
+#endif
 
 /* Bits for ->extendables field, extendables param, and related definitions. */
 #define RCUTORTURE_RDR_SHIFT	 8	/* Put SRCU index in upper bits. */
@@ -96,12 +109,20 @@ torture_param(int, object_debug, 0,
 torture_param(int, onoff_holdoff, 0, "Time after boot before CPU hotplugs (s)");
 torture_param(int, onoff_interval, 0,
 	     "Time between CPU hotplugs (jiffies), 0=disable");
+torture_param(int, read_exit, 4, "# of read-then-exit kthreads");
+torture_param(int, read_exit_delay, 13,
+	      "Delay between read-then-exit episodes (s)");
+torture_param(int, read_exit_burst, 16,
+	      "# of read-then-exit bursts per episode");
 torture_param(int, shuffle_interval, 3, "Number of seconds between shuffles");
 torture_param(int, shutdown_secs, 0, "Shutdown time (s), <= zero to disable.");
 torture_param(int, stall_cpu, 0, "Stall duration (s), zero to disable.");
 torture_param(int, stall_cpu_holdoff, 10,
 	     "Time to wait before starting stall (s).");
 torture_param(int, stall_cpu_irqsoff, 0, "Disable interrupts while stalling.");
+torture_param(int, stall_cpu_block, 0, "Sleep while stalling.");
+torture_param(int, stall_gp_kthread, 0,
+	      "Grace-period kthread stall duration (s).");
 torture_param(int, stat_interval, 60,
 	     "Number of seconds between stats printk()s");
 torture_param(int, stutter, 5, "Number of seconds to run/halt test");
@@ -130,6 +151,7 @@ static struct task_struct *stall_task;
 static struct task_struct *fwd_prog_task;
 static struct task_struct **barrier_cbs_tasks;
 static struct task_struct *barrier_task;
+static struct task_struct *read_exit_task;
 
 #define RCU_TORTURE_PIPE_LEN 10
 
@@ -161,6 +183,7 @@ static long n_rcu_torture_boosts;
 static atomic_long_t n_rcu_torture_timers;
 static long n_barrier_attempts;
 static long n_barrier_successes; /* did rcu_barrier test succeed? */
+static unsigned long n_read_exits;
 static struct list_head rcu_torture_removed;
 static unsigned long shutdown_jiffies;
 
@@ -665,6 +688,11 @@ static void rcu_tasks_torture_deferred_free(struct rcu_torture *p)
 	call_rcu_tasks(&p->rtort_rcu, rcu_torture_cb);
 }
 
+static void synchronize_rcu_mult_test(void)
+{
+	synchronize_rcu_mult(call_rcu_tasks, call_rcu);
+}
+
 static struct rcu_torture_ops tasks_ops = {
 	.ttype		= RCU_TASKS_FLAVOR,
 	.init		= rcu_sync_torture_init,
@@ -674,7 +702,7 @@ static struct rcu_torture_ops tasks_ops = {
 	.get_gp_seq	= rcu_no_completed,
 	.deferred_free	= rcu_tasks_torture_deferred_free,
 	.sync		= synchronize_rcu_tasks,
-	.exp_sync	= synchronize_rcu_tasks,
+	.exp_sync	= synchronize_rcu_mult_test,
 	.call		= call_rcu_tasks,
 	.cb_barrier	= rcu_barrier_tasks,
 	.fqs		= NULL,
@@ -725,6 +753,72 @@ static struct rcu_torture_ops trivial_ops = {
 	.name		= "trivial"
 };
 
+/*
+ * Definitions for rude RCU-tasks torture testing.
+ */
+
+static void rcu_tasks_rude_torture_deferred_free(struct rcu_torture *p)
+{
+	call_rcu_tasks_rude(&p->rtort_rcu, rcu_torture_cb);
+}
+
+static struct rcu_torture_ops tasks_rude_ops = {
+	.ttype		= RCU_TASKS_RUDE_FLAVOR,
+	.init		= rcu_sync_torture_init,
+	.readlock	= rcu_torture_read_lock_trivial,
+	.read_delay	= rcu_read_delay,  /* just reuse rcu's version. */
+	.readunlock	= rcu_torture_read_unlock_trivial,
+	.get_gp_seq	= rcu_no_completed,
+	.deferred_free	= rcu_tasks_rude_torture_deferred_free,
+	.sync		= synchronize_rcu_tasks_rude,
+	.exp_sync	= synchronize_rcu_tasks_rude,
+	.call		= call_rcu_tasks_rude,
+	.cb_barrier	= rcu_barrier_tasks_rude,
+	.fqs		= NULL,
+	.stats		= NULL,
+	.irq_capable	= 1,
+	.name		= "tasks-rude"
+};
+
+/*
+ * Definitions for tracing RCU-tasks torture testing.
+ */
+
+static int tasks_tracing_torture_read_lock(void)
+{
+	rcu_read_lock_trace();
+	return 0;
+}
+
+static void tasks_tracing_torture_read_unlock(int idx)
+{
+	rcu_read_unlock_trace();
+}
+
+static void rcu_tasks_tracing_torture_deferred_free(struct rcu_torture *p)
+{
+	call_rcu_tasks_trace(&p->rtort_rcu, rcu_torture_cb);
+}
+
+static struct rcu_torture_ops tasks_tracing_ops = {
+	.ttype		= RCU_TASKS_TRACING_FLAVOR,
+	.init		= rcu_sync_torture_init,
+	.readlock	= tasks_tracing_torture_read_lock,
+	.read_delay	= srcu_read_delay,  /* just reuse srcu's version. */
+	.readunlock	= tasks_tracing_torture_read_unlock,
+	.get_gp_seq	= rcu_no_completed,
+	.deferred_free	= rcu_tasks_tracing_torture_deferred_free,
+	.sync		= synchronize_rcu_tasks_trace,
+	.exp_sync	= synchronize_rcu_tasks_trace,
+	.call		= call_rcu_tasks_trace,
+	.cb_barrier	= rcu_barrier_tasks_trace,
+	.fqs		= NULL,
+	.stats		= NULL,
+	.irq_capable	= 1,
+	.slow_gps	= 1,
+	.name		= "tasks-tracing"
+};
+
 static unsigned long rcutorture_seq_diff(unsigned long new, unsigned long old)
 {
 	if (!cur_ops->gp_diff)
@@ -734,7 +828,7 @@ static unsigned long rcutorture_seq_diff(unsigned long new, unsigned long old)
 
 static bool __maybe_unused torturing_tasks(void)
 {
-	return cur_ops == &tasks_ops;
+	return cur_ops == &tasks_ops || cur_ops == &tasks_rude_ops;
 }
 
 /*
@@ -833,7 +927,7 @@ static int rcu_torture_boost(void *arg)
 
 		/* Wait for the next test interval. */
 		oldstarttime = boost_starttime;
-		while (ULONG_CMP_LT(jiffies, oldstarttime)) {
+		while (time_before(jiffies, oldstarttime)) {
 			schedule_timeout_interruptible(oldstarttime - jiffies);
 			stutter_wait("rcu_torture_boost");
 			if (torture_must_stop())
@@ -843,7 +937,7 @@ static int rcu_torture_boost(void *arg)
 		/* Do one boost-test interval. */
 		endtime = oldstarttime + test_boost_duration * HZ;
 		call_rcu_time = jiffies;
-		while (ULONG_CMP_LT(jiffies, endtime)) {
+		while (time_before(jiffies, endtime)) {
 			/* If we don't have a callback in flight, post one. */
 			if (!smp_load_acquire(&rbi.inflight)) {
 				/* RCU core before ->inflight = 1. */
@@ -914,7 +1008,7 @@ rcu_torture_fqs(void *arg)
 	VERBOSE_TOROUT_STRING("rcu_torture_fqs task started");
 	do {
 		fqs_resume_time = jiffies + fqs_stutter * HZ;
-		while (ULONG_CMP_LT(jiffies, fqs_resume_time) &&
+		while (time_before(jiffies, fqs_resume_time) &&
 		       !kthread_should_stop()) {
 			schedule_timeout_interruptible(1);
 		}
@@ -1079,6 +1173,7 @@ rcu_torture_writer(void *arg)
 					WARN(1, "%s: rtort_pipe_count: %d\n", __func__, rcu_tortures[i].rtort_pipe_count);
 				}
 	} while (!torture_must_stop());
+	rcu_torture_current = NULL;  // Let stats task know that we are done.
 	/* Reset expediting back to unexpedited. */
 	if (expediting > 0)
 		expediting = -expediting;
@@ -1147,6 +1242,7 @@ static void rcutorture_one_extend(int *readstate, int newstate,
 				  struct torture_random_state *trsp,
 				  struct rt_read_seg *rtrsp)
 {
+	unsigned long flags;
 	int idxnew = -1;
 	int idxold = *readstate;
 	int statesnew = ~*readstate & newstate;
@@ -1181,8 +1277,15 @@ static void rcutorture_one_extend(int *readstate, int newstate,
 		rcu_read_unlock_bh();
 	if (statesold & RCUTORTURE_RDR_SCHED)
 		rcu_read_unlock_sched();
-	if (statesold & RCUTORTURE_RDR_RCU)
+	if (statesold & RCUTORTURE_RDR_RCU) {
+		bool lockit = !statesnew && !(torture_random(trsp) & 0xffff);
+
+		if (lockit)
+			raw_spin_lock_irqsave(&current->pi_lock, flags);
 		cur_ops->readunlock(idxold >> RCUTORTURE_RDR_SHIFT);
+		if (lockit)
+			raw_spin_unlock_irqrestore(&current->pi_lock, flags);
+	}
 
 	/* Delay if neither beginning nor end and there was a change. */
 	if ((statesnew || statesold) && *readstate && newstate)
@@ -1283,6 +1386,7 @@ static bool rcu_torture_one_read(struct torture_random_state *trsp)
 				  rcu_read_lock_bh_held() ||
 				  rcu_read_lock_sched_held() ||
 				  srcu_read_lock_held(srcu_ctlp) ||
+				  rcu_read_lock_trace_held() ||
 				  torturing_tasks());
 	if (p == NULL) {
 		/* Wait for rcu_torture_writer to get underway */
@@ -1443,10 +1547,11 @@ rcu_torture_stats_print(void)
 		n_rcu_torture_boosts,
 		atomic_long_read(&n_rcu_torture_timers));
 	torture_onoff_stats();
-	pr_cont("barrier: %ld/%ld:%ld\n",
-		n_barrier_successes,
-		n_barrier_attempts,
-		n_rcu_torture_barrier_error);
+	pr_cont("barrier: %ld/%ld:%ld ",
+		data_race(n_barrier_successes),
+		data_race(n_barrier_attempts),
+		data_race(n_rcu_torture_barrier_error));
+	pr_cont("read-exits: %ld\n", data_race(n_read_exits));
 
 	pr_alert("%s%s ", torture_type, TORTURE_FLAG);
 	if (atomic_read(&n_rcu_torture_mberror) ||
@@ -1536,16 +1641,20 @@ rcu_torture_print_module_parms(struct rcu_torture_ops *cur_ops, const char *tag)
 		 "test_boost=%d/%d test_boost_interval=%d "
 		 "test_boost_duration=%d shutdown_secs=%d "
 		 "stall_cpu=%d stall_cpu_holdoff=%d stall_cpu_irqsoff=%d "
+		 "stall_cpu_block=%d "
 		 "n_barrier_cbs=%d "
-		 "onoff_interval=%d onoff_holdoff=%d\n",
+		 "onoff_interval=%d onoff_holdoff=%d "
+		 "read_exit=%d read_exit_delay=%d read_exit_burst=%d\n",
 		 torture_type, tag, nrealreaders, nfakewriters,
 		 stat_interval, verbose, test_no_idle_hz, shuffle_interval,
 		 stutter, irqreader, fqs_duration, fqs_holdoff, fqs_stutter,
 		 test_boost, cur_ops->can_boost,
 		 test_boost_interval, test_boost_duration, shutdown_secs,
 		 stall_cpu, stall_cpu_holdoff, stall_cpu_irqsoff,
+		 stall_cpu_block,
 		 n_barrier_cbs,
-		 onoff_interval, onoff_holdoff);
+		 onoff_interval, onoff_holdoff,
+		 read_exit, read_exit_delay, read_exit_burst);
 }
 
 static int rcutorture_booster_cleanup(unsigned int cpu)
@@ -1599,6 +1708,7 @@ static int rcutorture_booster_init(unsigned int cpu)
  */
 static int rcu_torture_stall(void *args)
 {
+	int idx;
 	unsigned long stop_at;
 
 	VERBOSE_TOROUT_STRING("rcu_torture_stall task started");
@@ -1607,26 +1717,37 @@ static int rcu_torture_stall(void *args)
 		schedule_timeout_interruptible(stall_cpu_holdoff * HZ);
 		VERBOSE_TOROUT_STRING("rcu_torture_stall end holdoff");
 	}
-	if (!kthread_should_stop()) {
+	if (!kthread_should_stop() && stall_gp_kthread > 0) {
+		VERBOSE_TOROUT_STRING("rcu_torture_stall begin GP stall");
+		rcu_gp_set_torture_wait(stall_gp_kthread * HZ);
+		for (idx = 0; idx < stall_gp_kthread + 2; idx++) {
+			if (kthread_should_stop())
+				break;
+			schedule_timeout_uninterruptible(HZ);
+		}
+	}
+	if (!kthread_should_stop() && stall_cpu > 0) {
+		VERBOSE_TOROUT_STRING("rcu_torture_stall begin CPU stall");
 		stop_at = ktime_get_seconds() + stall_cpu;
 		/* RCU CPU stall is expected behavior in following code. */
-		rcu_read_lock();
+		idx = cur_ops->readlock();
 		if (stall_cpu_irqsoff)
 			local_irq_disable();
-		else
+		else if (!stall_cpu_block)
 			preempt_disable();
 		pr_alert("rcu_torture_stall start on CPU %d.\n",
-			 smp_processor_id());
+			 raw_smp_processor_id());
 		while (ULONG_CMP_LT((unsigned long)ktime_get_seconds(),
 				    stop_at))
-			continue;  /* Induce RCU CPU stall warning. */
+			if (stall_cpu_block)
+				schedule_timeout_uninterruptible(HZ);
 		if (stall_cpu_irqsoff)
 			local_irq_enable();
-		else
+		else if (!stall_cpu_block)
 			preempt_enable();
-		rcu_read_unlock();
-		pr_alert("rcu_torture_stall end.\n");
+		cur_ops->readunlock(idx);
 	}
+	pr_alert("rcu_torture_stall end.\n");
 	torture_shutdown_absorb("rcu_torture_stall");
 	while (!kthread_should_stop())
 		schedule_timeout_interruptible(10 * HZ);
@@ -1636,7 +1757,7 @@ static int rcu_torture_stall(void *args)
 /* Spawn CPU-stall kthread, if stall_cpu specified. */
 static int __init rcu_torture_stall_init(void)
 {
-	if (stall_cpu <= 0)
+	if (stall_cpu <= 0 && stall_gp_kthread <= 0)
 		return 0;
 	return torture_create_kthread(rcu_torture_stall, NULL, stall_task);
 }
@@ -1692,8 +1813,8 @@ struct rcu_fwd {
 	unsigned long rcu_launder_gp_seq_start;
 };
 
-struct rcu_fwd *rcu_fwds;
-bool rcu_fwd_emergency_stop;
+static struct rcu_fwd *rcu_fwds;
+static bool rcu_fwd_emergency_stop;
 
 static void rcu_torture_fwd_cb_hist(struct rcu_fwd *rfp)
 {
@@ -2228,6 +2349,112 @@ static bool rcu_torture_can_boost(void)
 	return true;
 }
 
+static bool read_exit_child_stop;
+static bool read_exit_child_stopped;
+static wait_queue_head_t read_exit_wq;
+
+// Child kthread which just does an rcutorture reader and exits.
+static int rcu_torture_read_exit_child(void *trsp_in)
+{
+	struct torture_random_state *trsp = trsp_in;
+
+	set_user_nice(current, MAX_NICE);
+	(void)rcu_torture_one_read(trsp);
+	while (!kthread_should_stop())
+		schedule_timeout_uninterruptible(1);
+	return 0;
+}
+
+// Parent kthread which creates and destroys read-exit child kthreads.
+static int rcu_torture_read_exit(void *unused)
+{
+	int count = 0;
+	bool errexit = false;
+	int i;
+	struct task_struct **rep;
+	struct torture_random_state *trsp;
+
+	// Allocate and initialize.
+	set_user_nice(current, MAX_NICE);
+	rep = kcalloc(read_exit, sizeof(*rep), GFP_KERNEL);
+	trsp = kcalloc(read_exit, sizeof(*trsp), GFP_KERNEL);
+	if (rep && trsp) {
+		for (i = 0; i < read_exit; i++)
+			torture_random_init(&trsp[i]);
+		VERBOSE_TOROUT_STRING("rcu_torture_read_exit: Start of test");
+	} else {
+		kfree(rep);
+		kfree(trsp);
+		errexit = true;
+		VERBOSE_TOROUT_ERRSTRING("out of memory");
+	}
+
+	// Each pass through this loop does one read-exit episode.
+	while (!errexit && ! READ_ONCE(read_exit_child_stop)) {
+		if (++count > read_exit_burst) {
+			VERBOSE_TOROUT_STRING("rcu_torture_read_exit: End of episode");
+			schedule_timeout_uninterruptible(HZ * read_exit_delay);
+			VERBOSE_TOROUT_STRING("rcu_torture_read_exit: Start of episode");
+			count = 0;
+		}
+		// Spawn children.
+		for (i = 0; i < read_exit && i <= num_online_cpus(); i++) {
+			// We don't want per-child console messages.
+			rep[i] = kthread_run(rcu_torture_read_exit_child,
+					     &trsp[i], "%s",
+					     "rcu_torture_read_exit_child");
+			if (IS_ERR(rep[i])) {
+				VERBOSE_TOROUT_ERRSTRING("out of memory");
+				errexit = true;
+				rep[i] = NULL;
+				break;
+			}
+			cond_resched();
+		}
+		n_read_exits += i;
+		// Reap children.
+		for (i--; i >= 0; i--) {
+			kthread_stop(rep[i]);
+			rep[i] = NULL;
+			cond_resched();
+		}
+		rcu_barrier(); // Wait for task_struct freeing, avoid OOM.
+		stutter_wait("rcu_torture_read_exit");
+	}
+
+	// Clean up and exit.
+	smp_store_release(&read_exit_child_stopped, true); // After reaping.
+	smp_mb(); // Store before wakeup.
+	wake_up(&read_exit_wq);
+	kfree(rep);
+	kfree(trsp);
+	while (!torture_must_stop())
+		schedule_timeout_uninterruptible(1);
+	torture_kthread_stopping("rcu_torture_read_exit");
+	return 0;
+}
+
+static bool rcu_torture_read_exit_init(void)
+{
+	if (read_exit <= 0)
+		return true;
+	init_waitqueue_head(&read_exit_wq);
+	read_exit_child_stop = false;
+	read_exit_child_stopped = false;
+	return torture_create_kthread(rcu_torture_read_exit, NULL,
+				      read_exit_task);
+}
+
+static void rcu_torture_read_exit_cleanup(void)
+{
+	if (!read_exit_task)
+		return;
+	WRITE_ONCE(read_exit_child_stop, true);
+	smp_mb(); // Above write before wait.
+	wait_event(read_exit_wq, smp_load_acquire(&read_exit_child_stopped));
+	torture_stop_kthread(rcutorture_read_exit, read_exit_task);
+}
+
 static enum cpuhp_state rcutor_hp;
 
 static void
@@ -2249,6 +2476,7 @@ rcu_torture_cleanup(void)
 	}
 
 	show_rcu_gp_kthreads();
+	rcu_torture_read_exit_cleanup();
 	rcu_torture_barrier_cleanup();
 	torture_stop_kthread(rcu_torture_fwd_prog, fwd_prog_task);
 	torture_stop_kthread(rcu_torture_stall, stall_task);
@@ -2260,7 +2488,6 @@ rcu_torture_cleanup(void)
 					     reader_tasks[i]);
 		kfree(reader_tasks);
 	}
-	rcu_torture_current = NULL;
 
 	if (fakewriter_tasks) {
 		for (i = 0; i < nfakewriters; i++) {
@@ -2400,7 +2627,8 @@ rcu_torture_init(void)
 	int firsterr = 0;
 	static struct rcu_torture_ops *torture_ops[] = {
 		&rcu_ops, &rcu_busted_ops, &srcu_ops, &srcud_ops,
-		&busted_srcud_ops, &tasks_ops, &trivial_ops,
+		&busted_srcud_ops, &tasks_ops, &tasks_rude_ops,
+		&tasks_tracing_ops, &trivial_ops,
 	};
 
 	if (!torture_init_begin(torture_type, verbose))
@@ -2569,6 +2797,9 @@ rcu_torture_init(void)
 	if (firsterr)
 		goto unwind;
 	firsterr = rcu_torture_barrier_init();
+	if (firsterr)
+		goto unwind;
+	firsterr = rcu_torture_read_exit_init();
 	if (firsterr)
 		goto unwind;
 	if (object_debug)
diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
index 0c71505f0e19..8ff71e5d0fe8 100644
--- a/kernel/rcu/srcutree.c
+++ b/kernel/rcu/srcutree.c
@@ -29,6 +29,19 @@
 #include "rcu.h"
 #include "rcu_segcblist.h"
 
+#ifndef data_race
+#define data_race(expr)							\
+	({								\
+		expr;							\
+	})
+#endif
+#ifndef ASSERT_EXCLUSIVE_WRITER
+#define ASSERT_EXCLUSIVE_WRITER(var) do { } while (0)
+#endif
+#ifndef ASSERT_EXCLUSIVE_ACCESS
+#define ASSERT_EXCLUSIVE_ACCESS(var) do { } while (0)
+#endif
+
 /* Holdoff in nanoseconds for auto-expediting. */
 #define DEFAULT_SRCU_EXP_HOLDOFF (25 * 1000)
 static ulong exp_holdoff = DEFAULT_SRCU_EXP_HOLDOFF;
@@ -753,7 +766,7 @@ static void srcu_flip(struct srcu_struct *ssp)
  * it, if this function was preempted for enough time for the counters
  * to wrap, it really doesn't matter whether or not we expedite the grace
  * period.  The extra overhead of a needlessly expedited grace period is
- * negligible when amoritized over that time period, and the extra latency
+ * negligible when amortized over that time period, and the extra latency
  * of a needlessly non-expedited grace period is similarly negligible.
  */
 static bool srcu_might_be_idle(struct srcu_struct *ssp)
@@ -1268,8 +1281,8 @@ void srcu_torture_stats_print(struct srcu_struct *ssp, char *tt, char *tf)
 		struct srcu_data *sdp;
 
 		sdp = per_cpu_ptr(ssp->sda, cpu);
-		u0 = sdp->srcu_unlock_count[!idx];
-		u1 = sdp->srcu_unlock_count[idx];
+		u0 = data_race(sdp->srcu_unlock_count[!idx]);
+		u1 = data_race(sdp->srcu_unlock_count[idx]);
 
 		/*
 		 * Make sure that a lock is always counted if the corresponding
@@ -1277,8 +1290,8 @@ void srcu_torture_stats_print(struct srcu_struct *ssp, char *tt, char *tf)
 		 */
 		smp_rmb();
 
-		l0 = sdp->srcu_lock_count[!idx];
-		l1 = sdp->srcu_lock_count[idx];
+		l0 = data_race(sdp->srcu_lock_count[!idx]);
+		l1 = data_race(sdp->srcu_lock_count[idx]);
 
 		c0 = l0 - u0;
 		c1 = l1 - u1;
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
new file mode 100644
index 000000000000..ce23f6cc5043
--- /dev/null
+++ b/kernel/rcu/tasks.h
@@ -0,0 +1,1193 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Task-based RCU implementations.
+ *
+ * Copyright (C) 2020 Paul E. McKenney
+ */
+
+#ifdef CONFIG_TASKS_RCU_GENERIC
+
+////////////////////////////////////////////////////////////////////////
+//
+// Generic data structures.
+
+struct rcu_tasks;
+typedef void (*rcu_tasks_gp_func_t)(struct rcu_tasks *rtp);
+typedef void (*pregp_func_t)(void);
+typedef void (*pertask_func_t)(struct task_struct *t, struct list_head *hop);
+typedef void (*postscan_func_t)(struct list_head *hop);
+typedef void (*holdouts_func_t)(struct list_head *hop, bool ndrpt, bool *frptp);
+typedef void (*postgp_func_t)(struct rcu_tasks *rtp);
+
+/**
+ * Definition for a Tasks-RCU-like mechanism.
+ * @cbs_head: Head of callback list.
+ * @cbs_tail: Tail pointer for callback list.
+ * @cbs_wq: Wait queue allowning new callback to get kthread's attention.
+ * @cbs_lock: Lock protecting callback list.
+ * @kthread_ptr: This flavor's grace-period/callback-invocation kthread.
+ * @gp_func: This flavor's grace-period-wait function.
+ * @gp_state: Grace period's most recent state transition (debugging).
+ * @gp_jiffies: Time of last @gp_state transition.
+ * @gp_start: Most recent grace-period start in jiffies.
+ * @n_gps: Number of grace periods completed since boot.
+ * @n_ipis: Number of IPIs sent to encourage grace periods to end.
+ * @n_ipis_fails: Number of IPI-send failures.
+ * @pregp_func: This flavor's pre-grace-period function (optional).
+ * @pertask_func: This flavor's per-task scan function (optional).
+ * @postscan_func: This flavor's post-task scan function (optional).
+ * @holdout_func: This flavor's holdout-list scan function (optional).
+ * @postgp_func: This flavor's post-grace-period function (optional).
+ * @call_func: This flavor's call_rcu()-equivalent function.
+ * @name: This flavor's textual name.
+ * @kname: This flavor's kthread name.
+ */
+struct rcu_tasks {
+	struct rcu_head *cbs_head;
+	struct rcu_head **cbs_tail;
+	struct wait_queue_head cbs_wq;
+	raw_spinlock_t cbs_lock;
+	int gp_state;
+	unsigned long gp_jiffies;
+	unsigned long gp_start;
+	unsigned long n_gps;
+	unsigned long n_ipis;
+	unsigned long n_ipis_fails;
+	struct task_struct *kthread_ptr;
+	rcu_tasks_gp_func_t gp_func;
+	pregp_func_t pregp_func;
+	pertask_func_t pertask_func;
+	postscan_func_t postscan_func;
+	holdouts_func_t holdouts_func;
+	postgp_func_t postgp_func;
+	call_rcu_func_t call_func;
+	char *name;
+	char *kname;
+};
+
+#define DEFINE_RCU_TASKS(rt_name, gp, call, n)				\
+static struct rcu_tasks rt_name =					\
+{									\
+	.cbs_tail = &rt_name.cbs_head,					\
+	.cbs_wq = __WAIT_QUEUE_HEAD_INITIALIZER(rt_name.cbs_wq),	\
+	.cbs_lock = __RAW_SPIN_LOCK_UNLOCKED(rt_name.cbs_lock),		\
+	.gp_func = gp,							\
+	.call_func = call,						\
+	.name = n,							\
+	.kname = #rt_name,						\
+}
+
+/* Track exiting tasks in order to allow them to be waited for. */
+DEFINE_STATIC_SRCU(tasks_rcu_exit_srcu);
+
+/* Avoid IPIing CPUs early in the grace period. */
+#define RCU_TASK_IPI_DELAY (HZ / 2)
+static int rcu_task_ipi_delay __read_mostly = RCU_TASK_IPI_DELAY;
+module_param(rcu_task_ipi_delay, int, 0644);
+
+/* Control stall timeouts.  Disable with <= 0, otherwise jiffies till stall. */
+#define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10)
+static int rcu_task_stall_timeout __read_mostly = RCU_TASK_STALL_TIMEOUT;
+module_param(rcu_task_stall_timeout, int, 0644);
+
+/* RCU tasks grace-period state for debugging. */
+#define RTGS_INIT		 0
+#define RTGS_WAIT_WAIT_CBS	 1
+#define RTGS_WAIT_GP		 2
+#define RTGS_PRE_WAIT_GP	 3
+#define RTGS_SCAN_TASKLIST	 4
+#define RTGS_POST_SCAN_TASKLIST	 5
+#define RTGS_WAIT_SCAN_HOLDOUTS	 6
+#define RTGS_SCAN_HOLDOUTS	 7
+#define RTGS_POST_GP		 8
+#define RTGS_WAIT_READERS	 9
+#define RTGS_INVOKE_CBS		10
+#define RTGS_WAIT_CBS		11
+static const char * const rcu_tasks_gp_state_names[] = {
+	"RTGS_INIT",
+	"RTGS_WAIT_WAIT_CBS",
+	"RTGS_WAIT_GP",
+	"RTGS_PRE_WAIT_GP",
+	"RTGS_SCAN_TASKLIST",
+	"RTGS_POST_SCAN_TASKLIST",
+	"RTGS_WAIT_SCAN_HOLDOUTS",
+	"RTGS_SCAN_HOLDOUTS",
+	"RTGS_POST_GP",
+	"RTGS_WAIT_READERS",
+	"RTGS_INVOKE_CBS",
+	"RTGS_WAIT_CBS",
+};
+
+////////////////////////////////////////////////////////////////////////
+//
+// Generic code.
+
+/* Record grace-period phase and time. */
+static void set_tasks_gp_state(struct rcu_tasks *rtp, int newstate)
+{
+	rtp->gp_state = newstate;
+	rtp->gp_jiffies = jiffies;
+}
+
+/* Return state name. */
+static const char *tasks_gp_state_getname(struct rcu_tasks *rtp)
+{
+	int i = data_race(rtp->gp_state); // Let KCSAN detect update races
+	int j = READ_ONCE(i); // Prevent the compiler from reading twice
+
+	if (j >= ARRAY_SIZE(rcu_tasks_gp_state_names))
+		return "???";
+	return rcu_tasks_gp_state_names[j];
+}
+
+// Enqueue a callback for the specified flavor of Tasks RCU.
+static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func,
+				   struct rcu_tasks *rtp)
+{
+	unsigned long flags;
+	bool needwake;
+
+	rhp->next = NULL;
+	rhp->func = func;
+	raw_spin_lock_irqsave(&rtp->cbs_lock, flags);
+	needwake = !rtp->cbs_head;
+	WRITE_ONCE(*rtp->cbs_tail, rhp);
+	rtp->cbs_tail = &rhp->next;
+	raw_spin_unlock_irqrestore(&rtp->cbs_lock, flags);
+	/* We can't create the thread unless interrupts are enabled. */
+	if (needwake && READ_ONCE(rtp->kthread_ptr))
+		wake_up(&rtp->cbs_wq);
+}
+
+// Wait for a grace period for the specified flavor of Tasks RCU.
+static void synchronize_rcu_tasks_generic(struct rcu_tasks *rtp)
+{
+	/* Complain if the scheduler has not started.  */
+	RCU_LOCKDEP_WARN(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE,
+			 "synchronize_rcu_tasks called too soon");
+
+	/* Wait for the grace period. */
+	wait_rcu_gp(rtp->call_func);
+}
+
+/* RCU-tasks kthread that detects grace periods and invokes callbacks. */
+static int __noreturn rcu_tasks_kthread(void *arg)
+{
+	unsigned long flags;
+	struct rcu_head *list;
+	struct rcu_head *next;
+	struct rcu_tasks *rtp = arg;
+
+	/* Run on housekeeping CPUs by default.  Sysadm can move if desired. */
+	housekeeping_affine(current, HK_FLAG_RCU);
+	WRITE_ONCE(rtp->kthread_ptr, current); // Let GPs start!
+
+	/*
+	 * Each pass through the following loop makes one check for
+	 * newly arrived callbacks, and, if there are some, waits for
+	 * one RCU-tasks grace period and then invokes the callbacks.
+	 * This loop is terminated by the system going down.  ;-)
+	 */
+	for (;;) {
+
+		/* Pick up any new callbacks. */
+		raw_spin_lock_irqsave(&rtp->cbs_lock, flags);
+		smp_mb__after_spinlock(); // Order updates vs. GP.
+		list = rtp->cbs_head;
+		rtp->cbs_head = NULL;
+		rtp->cbs_tail = &rtp->cbs_head;
+		raw_spin_unlock_irqrestore(&rtp->cbs_lock, flags);
+
+		/* If there were none, wait a bit and start over. */
+		if (!list) {
+			wait_event_interruptible(rtp->cbs_wq,
+						 READ_ONCE(rtp->cbs_head));
+			if (!rtp->cbs_head) {
+				WARN_ON(signal_pending(current));
+				set_tasks_gp_state(rtp, RTGS_WAIT_WAIT_CBS);
+				schedule_timeout_interruptible(HZ/10);
+			}
+			continue;
+		}
+
+		// Wait for one grace period.
+		set_tasks_gp_state(rtp, RTGS_WAIT_GP);
+		rtp->gp_start = jiffies;
+		rtp->gp_func(rtp);
+		rtp->n_gps++;
+
+		/* Invoke the callbacks. */
+		set_tasks_gp_state(rtp, RTGS_INVOKE_CBS);
+		while (list) {
+			next = list->next;
+			local_bh_disable();
+			list->func(list);
+			local_bh_enable();
+			list = next;
+			cond_resched();
+		}
+		/* Paranoid sleep to keep this from entering a tight loop */
+		schedule_timeout_uninterruptible(HZ/10);
+
+		set_tasks_gp_state(rtp, RTGS_WAIT_CBS);
+	}
+}
+
+/* Spawn RCU-tasks grace-period kthread, e.g., at core_initcall() time. */
+static void __init rcu_spawn_tasks_kthread_generic(struct rcu_tasks *rtp)
+{
+	struct task_struct *t;
+
+	t = kthread_run(rcu_tasks_kthread, rtp, "%s_kthread", rtp->kname);
+	if (WARN_ONCE(IS_ERR(t), "%s: Could not start %s grace-period kthread, OOM is now expected behavior\n", __func__, rtp->name))
+		return;
+	smp_mb(); /* Ensure others see full kthread. */
+}
+
+#ifndef CONFIG_TINY_RCU
+
+/*
+ * Print any non-default Tasks RCU settings.
+ */
+static void __init rcu_tasks_bootup_oddness(void)
+{
+#if defined(CONFIG_TASKS_RCU) || defined(CONFIG_TASKS_TRACE_RCU)
+	if (rcu_task_stall_timeout != RCU_TASK_STALL_TIMEOUT)
+		pr_info("\tTasks-RCU CPU stall warnings timeout set to %d (rcu_task_stall_timeout).\n", rcu_task_stall_timeout);
+#endif /* #ifdef CONFIG_TASKS_RCU */
+#ifdef CONFIG_TASKS_RCU
+	pr_info("\tTrampoline variant of Tasks RCU enabled.\n");
+#endif /* #ifdef CONFIG_TASKS_RCU */
+#ifdef CONFIG_TASKS_RUDE_RCU
+	pr_info("\tRude variant of Tasks RCU enabled.\n");
+#endif /* #ifdef CONFIG_TASKS_RUDE_RCU */
+#ifdef CONFIG_TASKS_TRACE_RCU
+	pr_info("\tTracing variant of Tasks RCU enabled.\n");
+#endif /* #ifdef CONFIG_TASKS_TRACE_RCU */
+}
+
+#endif /* #ifndef CONFIG_TINY_RCU */
+
+/* Dump out rcutorture-relevant state common to all RCU-tasks flavors. */
+static void show_rcu_tasks_generic_gp_kthread(struct rcu_tasks *rtp, char *s)
+{
+	pr_info("%s: %s(%d) since %lu g:%lu i:%lu/%lu %c%c %s\n",
+		rtp->kname,
+		tasks_gp_state_getname(rtp), data_race(rtp->gp_state),
+		jiffies - data_race(rtp->gp_jiffies),
+		data_race(rtp->n_gps),
+		data_race(rtp->n_ipis_fails), data_race(rtp->n_ipis),
+		".k"[!!data_race(rtp->kthread_ptr)],
+		".C"[!!data_race(rtp->cbs_head)],
+		s);
+}
+
+static void exit_tasks_rcu_finish_trace(struct task_struct *t);
+
+#if defined(CONFIG_TASKS_RCU) || defined(CONFIG_TASKS_TRACE_RCU)
+
+////////////////////////////////////////////////////////////////////////
+//
+// Shared code between task-list-scanning variants of Tasks RCU.
+
+/* Wait for one RCU-tasks grace period. */
+static void rcu_tasks_wait_gp(struct rcu_tasks *rtp)
+{
+	struct task_struct *g, *t;
+	unsigned long lastreport;
+	LIST_HEAD(holdouts);
+	int fract;
+
+	set_tasks_gp_state(rtp, RTGS_PRE_WAIT_GP);
+	rtp->pregp_func();
+
+	/*
+	 * There were callbacks, so we need to wait for an RCU-tasks
+	 * grace period.  Start off by scanning the task list for tasks
+	 * that are not already voluntarily blocked.  Mark these tasks
+	 * and make a list of them in holdouts.
+	 */
+	set_tasks_gp_state(rtp, RTGS_SCAN_TASKLIST);
+	rcu_read_lock();
+	for_each_process_thread(g, t)
+		rtp->pertask_func(t, &holdouts);
+	rcu_read_unlock();
+
+	set_tasks_gp_state(rtp, RTGS_POST_SCAN_TASKLIST);
+	rtp->postscan_func(&holdouts);
+
+	/*
+	 * Each pass through the following loop scans the list of holdout
+	 * tasks, removing any that are no longer holdouts.  When the list
+	 * is empty, we are done.
+	 */
+	lastreport = jiffies;
+
+	/* Start off with HZ/10 wait and slowly back off to 1 HZ wait. */
+	fract = 10;
+
+	for (;;) {
+		bool firstreport;
+		bool needreport;
+		int rtst;
+
+		if (list_empty(&holdouts))
+			break;
+
+		/* Slowly back off waiting for holdouts */
+		set_tasks_gp_state(rtp, RTGS_WAIT_SCAN_HOLDOUTS);
+		schedule_timeout_interruptible(HZ/fract);
+
+		if (fract > 1)
+			fract--;
+
+		rtst = READ_ONCE(rcu_task_stall_timeout);
+		needreport = rtst > 0 && time_after(jiffies, lastreport + rtst);
+		if (needreport)
+			lastreport = jiffies;
+		firstreport = true;
+		WARN_ON(signal_pending(current));
+		set_tasks_gp_state(rtp, RTGS_SCAN_HOLDOUTS);
+		rtp->holdouts_func(&holdouts, needreport, &firstreport);
+	}
+
+	set_tasks_gp_state(rtp, RTGS_POST_GP);
+	rtp->postgp_func(rtp);
+}
+
+#endif /* #if defined(CONFIG_TASKS_RCU) || defined(CONFIG_TASKS_TRACE_RCU) */
+
+#ifdef CONFIG_TASKS_RCU
+
+////////////////////////////////////////////////////////////////////////
+//
+// Simple variant of RCU whose quiescent states are voluntary context
+// switch, cond_resched_rcu_qs(), user-space execution, and idle.
+// As such, grace periods can take one good long time.  There are no
+// read-side primitives similar to rcu_read_lock() and rcu_read_unlock()
+// because this implementation is intended to get the system into a safe
+// state for some of the manipulations involved in tracing and the like.
+// Finally, this implementation does not support high call_rcu_tasks()
+// rates from multiple CPUs.  If this is required, per-CPU callback lists
+// will be needed.
+
+/* Pre-grace-period preparation. */
+static void rcu_tasks_pregp_step(void)
+{
+	/*
+	 * Wait for all pre-existing t->on_rq and t->nvcsw transitions
+	 * to complete.  Invoking synchronize_rcu() suffices because all
+	 * these transitions occur with interrupts disabled.  Without this
+	 * synchronize_rcu(), a read-side critical section that started
+	 * before the grace period might be incorrectly seen as having
+	 * started after the grace period.
+	 *
+	 * This synchronize_rcu() also dispenses with the need for a
+	 * memory barrier on the first store to t->rcu_tasks_holdout,
+	 * as it forces the store to happen after the beginning of the
+	 * grace period.
+	 */
+	synchronize_rcu();
+}
+
+/* Per-task initial processing. */
+static void rcu_tasks_pertask(struct task_struct *t, struct list_head *hop)
+{
+	if (t != current && READ_ONCE(t->on_rq) && !is_idle_task(t)) {
+		get_task_struct(t);
+		t->rcu_tasks_nvcsw = READ_ONCE(t->nvcsw);
+		WRITE_ONCE(t->rcu_tasks_holdout, true);
+		list_add(&t->rcu_tasks_holdout_list, hop);
+	}
+}
+
+/* Processing between scanning taskslist and draining the holdout list. */
+void rcu_tasks_postscan(struct list_head *hop)
+{
+	/*
+	 * Wait for tasks that are in the process of exiting.  This
+	 * does only part of the job, ensuring that all tasks that were
+	 * previously exiting reach the point where they have disabled
+	 * preemption, allowing the later synchronize_rcu() to finish
+	 * the job.
+	 */
+	synchronize_srcu(&tasks_rcu_exit_srcu);
+}
+
+/* See if tasks are still holding out, complain if so. */
+static void check_holdout_task(struct task_struct *t,
+			       bool needreport, bool *firstreport)
+{
+	int cpu;
+
+	if (!READ_ONCE(t->rcu_tasks_holdout) ||
+	    t->rcu_tasks_nvcsw != READ_ONCE(t->nvcsw) ||
+	    !READ_ONCE(t->on_rq) ||
+	    (IS_ENABLED(CONFIG_NO_HZ_FULL) &&
+	     !is_idle_task(t) && t->rcu_tasks_idle_cpu >= 0)) {
+		WRITE_ONCE(t->rcu_tasks_holdout, false);
+		list_del_init(&t->rcu_tasks_holdout_list);
+		put_task_struct(t);
+		return;
+	}
+	rcu_request_urgent_qs_task(t);
+	if (!needreport)
+		return;
+	if (*firstreport) {
+		pr_err("INFO: rcu_tasks detected stalls on tasks:\n");
+		*firstreport = false;
+	}
+	cpu = task_cpu(t);
+	pr_alert("%p: %c%c nvcsw: %lu/%lu holdout: %d idle_cpu: %d/%d\n",
+		 t, ".I"[is_idle_task(t)],
+		 "N."[cpu < 0 || !tick_nohz_full_cpu(cpu)],
+		 t->rcu_tasks_nvcsw, t->nvcsw, t->rcu_tasks_holdout,
+		 t->rcu_tasks_idle_cpu, cpu);
+	sched_show_task(t);
+}
+
+/* Scan the holdout lists for tasks no longer holding out. */
+static void check_all_holdout_tasks(struct list_head *hop,
+				    bool needreport, bool *firstreport)
+{
+	struct task_struct *t, *t1;
+
+	list_for_each_entry_safe(t, t1, hop, rcu_tasks_holdout_list) {
+		check_holdout_task(t, needreport, firstreport);
+		cond_resched();
+	}
+}
+
+/* Finish off the Tasks-RCU grace period. */
+static void rcu_tasks_postgp(struct rcu_tasks *rtp)
+{
+	/*
+	 * Because ->on_rq and ->nvcsw are not guaranteed to have a full
+	 * memory barriers prior to them in the schedule() path, memory
+	 * reordering on other CPUs could cause their RCU-tasks read-side
+	 * critical sections to extend past the end of the grace period.
+	 * However, because these ->nvcsw updates are carried out with
+	 * interrupts disabled, we can use synchronize_rcu() to force the
+	 * needed ordering on all such CPUs.
+	 *
+	 * This synchronize_rcu() also confines all ->rcu_tasks_holdout
+	 * accesses to be within the grace period, avoiding the need for
+	 * memory barriers for ->rcu_tasks_holdout accesses.
+	 *
+	 * In addition, this synchronize_rcu() waits for exiting tasks
+	 * to complete their final preempt_disable() region of execution,
+	 * cleaning up after the synchronize_srcu() above.
+	 */
+	synchronize_rcu();
+}
+
+void call_rcu_tasks(struct rcu_head *rhp, rcu_callback_t func);
+DEFINE_RCU_TASKS(rcu_tasks, rcu_tasks_wait_gp, call_rcu_tasks, "RCU Tasks");
+
+/**
+ * call_rcu_tasks() - Queue an RCU for invocation task-based grace period
+ * @rhp: structure to be used for queueing the RCU updates.
+ * @func: actual callback function to be invoked after the grace period
+ *
+ * The callback function will be invoked some time after a full grace
+ * period elapses, in other words after all currently executing RCU
+ * read-side critical sections have completed. call_rcu_tasks() assumes
+ * that the read-side critical sections end at a voluntary context
+ * switch (not a preemption!), cond_resched_rcu_qs(), entry into idle,
+ * or transition to usermode execution.  As such, there are no read-side
+ * primitives analogous to rcu_read_lock() and rcu_read_unlock() because
+ * this primitive is intended to determine that all tasks have passed
+ * through a safe state, not so much for data-strcuture synchronization.
+ *
+ * See the description of call_rcu() for more detailed information on
+ * memory ordering guarantees.
+ */
+void call_rcu_tasks(struct rcu_head *rhp, rcu_callback_t func)
+{
+	call_rcu_tasks_generic(rhp, func, &rcu_tasks);
+}
+EXPORT_SYMBOL_GPL(call_rcu_tasks);
+
+/**
+ * synchronize_rcu_tasks - wait until an rcu-tasks grace period has elapsed.
+ *
+ * Control will return to the caller some time after a full rcu-tasks
+ * grace period has elapsed, in other words after all currently
+ * executing rcu-tasks read-side critical sections have elapsed.  These
+ * read-side critical sections are delimited by calls to schedule(),
+ * cond_resched_tasks_rcu_qs(), idle execution, userspace execution, calls
+ * to synchronize_rcu_tasks(), and (in theory, anyway) cond_resched().
+ *
+ * This is a very specialized primitive, intended only for a few uses in
+ * tracing and other situations requiring manipulation of function
+ * preambles and profiling hooks.  The synchronize_rcu_tasks() function
+ * is not (yet) intended for heavy use from multiple CPUs.
+ *
+ * See the description of synchronize_rcu() for more detailed information
+ * on memory ordering guarantees.
+ */
+void synchronize_rcu_tasks(void)
+{
+	synchronize_rcu_tasks_generic(&rcu_tasks);
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_tasks);
+
+/**
+ * rcu_barrier_tasks - Wait for in-flight call_rcu_tasks() callbacks.
+ *
+ * Although the current implementation is guaranteed to wait, it is not
+ * obligated to, for example, if there are no pending callbacks.
+ */
+void rcu_barrier_tasks(void)
+{
+	/* There is only one callback queue, so this is easy.  ;-) */
+	synchronize_rcu_tasks();
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_tasks);
+
+static int __init rcu_spawn_tasks_kthread(void)
+{
+	rcu_tasks.pregp_func = rcu_tasks_pregp_step;
+	rcu_tasks.pertask_func = rcu_tasks_pertask;
+	rcu_tasks.postscan_func = rcu_tasks_postscan;
+	rcu_tasks.holdouts_func = check_all_holdout_tasks;
+	rcu_tasks.postgp_func = rcu_tasks_postgp;
+	rcu_spawn_tasks_kthread_generic(&rcu_tasks);
+	return 0;
+}
+core_initcall(rcu_spawn_tasks_kthread);
+
+static void show_rcu_tasks_classic_gp_kthread(void)
+{
+	show_rcu_tasks_generic_gp_kthread(&rcu_tasks, "");
+}
+
+/* Do the srcu_read_lock() for the above synchronize_srcu().  */
+void exit_tasks_rcu_start(void) __acquires(&tasks_rcu_exit_srcu)
+{
+	preempt_disable();
+	current->rcu_tasks_idx = __srcu_read_lock(&tasks_rcu_exit_srcu);
+	preempt_enable();
+}
+
+/* Do the srcu_read_unlock() for the above synchronize_srcu().  */
+void exit_tasks_rcu_finish(void) __releases(&tasks_rcu_exit_srcu)
+{
+	struct task_struct *t = current;
+
+	preempt_disable();
+	__srcu_read_unlock(&tasks_rcu_exit_srcu, t->rcu_tasks_idx);
+	preempt_enable();
+	exit_tasks_rcu_finish_trace(t);
+}
+
+#else /* #ifdef CONFIG_TASKS_RCU */
+static void show_rcu_tasks_classic_gp_kthread(void) { }
+void exit_tasks_rcu_start(void) { }
+void exit_tasks_rcu_finish(void) { exit_tasks_rcu_finish_trace(current); }
+#endif /* #else #ifdef CONFIG_TASKS_RCU */
+
+#ifdef CONFIG_TASKS_RUDE_RCU
+
+////////////////////////////////////////////////////////////////////////
+//
+// "Rude" variant of Tasks RCU, inspired by Steve Rostedt's trick of
+// passing an empty function to schedule_on_each_cpu().  This approach
+// provides an asynchronous call_rcu_tasks_rude() API and batching
+// of concurrent calls to the synchronous synchronize_rcu_rude() API.
+// This sends IPIs far and wide and induces otherwise unnecessary context
+// switches on all online CPUs, whether idle or not.
+
+// Empty function to allow workqueues to force a context switch.
+static void rcu_tasks_be_rude(struct work_struct *work)
+{
+}
+
+// Wait for one rude RCU-tasks grace period.
+static void rcu_tasks_rude_wait_gp(struct rcu_tasks *rtp)
+{
+	rtp->n_ipis += cpumask_weight(cpu_online_mask);
+	schedule_on_each_cpu(rcu_tasks_be_rude);
+}
+
+void call_rcu_tasks_rude(struct rcu_head *rhp, rcu_callback_t func);
+DEFINE_RCU_TASKS(rcu_tasks_rude, rcu_tasks_rude_wait_gp, call_rcu_tasks_rude,
+		 "RCU Tasks Rude");
+
+/**
+ * call_rcu_tasks_rude() - Queue a callback rude task-based grace period
+ * @rhp: structure to be used for queueing the RCU updates.
+ * @func: actual callback function to be invoked after the grace period
+ *
+ * The callback function will be invoked some time after a full grace
+ * period elapses, in other words after all currently executing RCU
+ * read-side critical sections have completed. call_rcu_tasks_rude()
+ * assumes that the read-side critical sections end at context switch,
+ * cond_resched_rcu_qs(), or transition to usermode execution.  As such,
+ * there are no read-side primitives analogous to rcu_read_lock() and
+ * rcu_read_unlock() because this primitive is intended to determine
+ * that all tasks have passed through a safe state, not so much for
+ * data-strcuture synchronization.
+ *
+ * See the description of call_rcu() for more detailed information on
+ * memory ordering guarantees.
+ */
+void call_rcu_tasks_rude(struct rcu_head *rhp, rcu_callback_t func)
+{
+	call_rcu_tasks_generic(rhp, func, &rcu_tasks_rude);
+}
+EXPORT_SYMBOL_GPL(call_rcu_tasks_rude);
+
+/**
+ * synchronize_rcu_tasks_rude - wait for a rude rcu-tasks grace period
+ *
+ * Control will return to the caller some time after a rude rcu-tasks
+ * grace period has elapsed, in other words after all currently
+ * executing rcu-tasks read-side critical sections have elapsed.  These
+ * read-side critical sections are delimited by calls to schedule(),
+ * cond_resched_tasks_rcu_qs(), userspace execution, and (in theory,
+ * anyway) cond_resched().
+ *
+ * This is a very specialized primitive, intended only for a few uses in
+ * tracing and other situations requiring manipulation of function preambles
+ * and profiling hooks.  The synchronize_rcu_tasks_rude() function is not
+ * (yet) intended for heavy use from multiple CPUs.
+ *
+ * See the description of synchronize_rcu() for more detailed information
+ * on memory ordering guarantees.
+ */
+void synchronize_rcu_tasks_rude(void)
+{
+	synchronize_rcu_tasks_generic(&rcu_tasks_rude);
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_tasks_rude);
+
+/**
+ * rcu_barrier_tasks_rude - Wait for in-flight call_rcu_tasks_rude() callbacks.
+ *
+ * Although the current implementation is guaranteed to wait, it is not
+ * obligated to, for example, if there are no pending callbacks.
+ */
+void rcu_barrier_tasks_rude(void)
+{
+	/* There is only one callback queue, so this is easy.  ;-) */
+	synchronize_rcu_tasks_rude();
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_tasks_rude);
+
+static int __init rcu_spawn_tasks_rude_kthread(void)
+{
+	rcu_spawn_tasks_kthread_generic(&rcu_tasks_rude);
+	return 0;
+}
+core_initcall(rcu_spawn_tasks_rude_kthread);
+
+static void show_rcu_tasks_rude_gp_kthread(void)
+{
+	show_rcu_tasks_generic_gp_kthread(&rcu_tasks_rude, "");
+}
+
+#else /* #ifdef CONFIG_TASKS_RUDE_RCU */
+static void show_rcu_tasks_rude_gp_kthread(void) {}
+#endif /* #else #ifdef CONFIG_TASKS_RUDE_RCU */
+
+////////////////////////////////////////////////////////////////////////
+//
+// Tracing variant of Tasks RCU.  This variant is designed to be used
+// to protect tracing hooks, including those of BPF.  This variant
+// therefore:
+//
+// 1.	Has explicit read-side markers to allow finite grace periods
+//	in the face of in-kernel loops for PREEMPT=n builds.
+//
+// 2.	Protects code in the idle loop, exception entry/exit, and
+//	CPU-hotplug code paths, similar to the capabilities of SRCU.
+//
+// 3.	Avoids expensive read-side instruction, having overhead similar
+//	to that of Preemptible RCU.
+//
+// There are of course downsides.  The grace-period code can send IPIs to
+// CPUs, even when those CPUs are in the idle loop or in nohz_full userspace.
+// It is necessary to scan the full tasklist, much as for Tasks RCU.  There
+// is a single callback queue guarded by a single lock, again, much as for
+// Tasks RCU.  If needed, these downsides can be at least partially remedied.
+//
+// Perhaps most important, this variant of RCU does not affect the vanilla
+// flavors, rcu_preempt and rcu_sched.  The fact that RCU Tasks Trace
+// readers can operate from idle, offline, and exception entry/exit in no
+// way allows rcu_preempt and rcu_sched readers to also do so.
+
+// The lockdep state must be outside of #ifdef to be useful.
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key rcu_lock_trace_key;
+struct lockdep_map rcu_trace_lock_map =
+	STATIC_LOCKDEP_MAP_INIT("rcu_read_lock_trace", &rcu_lock_trace_key);
+EXPORT_SYMBOL_GPL(rcu_trace_lock_map);
+#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+#ifdef CONFIG_TASKS_TRACE_RCU
+
+atomic_t trc_n_readers_need_end;	// Number of waited-for readers.
+DECLARE_WAIT_QUEUE_HEAD(trc_wait);	// List of holdout tasks.
+
+// Record outstanding IPIs to each CPU.  No point in sending two...
+static DEFINE_PER_CPU(bool, trc_ipi_to_cpu);
+
+// The number of detections of task quiescent state relying on
+// heavyweight readers executing explicit memory barriers.
+unsigned long n_heavy_reader_attempts;
+unsigned long n_heavy_reader_updates;
+unsigned long n_heavy_reader_ofl_updates;
+
+void call_rcu_tasks_trace(struct rcu_head *rhp, rcu_callback_t func);
+DEFINE_RCU_TASKS(rcu_tasks_trace, rcu_tasks_wait_gp, call_rcu_tasks_trace,
+		 "RCU Tasks Trace");
+
+/*
+ * This irq_work handler allows rcu_read_unlock_trace() to be invoked
+ * while the scheduler locks are held.
+ */
+static void rcu_read_unlock_iw(struct irq_work *iwp)
+{
+	wake_up(&trc_wait);
+}
+static DEFINE_IRQ_WORK(rcu_tasks_trace_iw, rcu_read_unlock_iw);
+
+/* If we are the last reader, wake up the grace-period kthread. */
+void rcu_read_unlock_trace_special(struct task_struct *t, int nesting)
+{
+	int nq = t->trc_reader_special.b.need_qs;
+
+	if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB) &&
+	    t->trc_reader_special.b.need_mb)
+		smp_mb(); // Pairs with update-side barriers.
+	// Update .need_qs before ->trc_reader_nesting for irq/NMI handlers.
+	if (nq)
+		WRITE_ONCE(t->trc_reader_special.b.need_qs, false);
+	WRITE_ONCE(t->trc_reader_nesting, nesting);
+	if (nq && atomic_dec_and_test(&trc_n_readers_need_end))
+		irq_work_queue(&rcu_tasks_trace_iw);
+}
+EXPORT_SYMBOL_GPL(rcu_read_unlock_trace_special);
+
+/* Add a task to the holdout list, if it is not already on the list. */
+static void trc_add_holdout(struct task_struct *t, struct list_head *bhp)
+{
+	if (list_empty(&t->trc_holdout_list)) {
+		get_task_struct(t);
+		list_add(&t->trc_holdout_list, bhp);
+	}
+}
+
+/* Remove a task from the holdout list, if it is in fact present. */
+static void trc_del_holdout(struct task_struct *t)
+{
+	if (!list_empty(&t->trc_holdout_list)) {
+		list_del_init(&t->trc_holdout_list);
+		put_task_struct(t);
+	}
+}
+
+/* IPI handler to check task state. */
+static void trc_read_check_handler(void *t_in)
+{
+	struct task_struct *t = current;
+	struct task_struct *texp = t_in;
+
+	// If the task is no longer running on this CPU, leave.
+	if (unlikely(texp != t)) {
+		if (WARN_ON_ONCE(atomic_dec_and_test(&trc_n_readers_need_end)))
+			wake_up(&trc_wait);
+		goto reset_ipi; // Already on holdout list, so will check later.
+	}
+
+	// If the task is not in a read-side critical section, and
+	// if this is the last reader, awaken the grace-period kthread.
+	if (likely(!t->trc_reader_nesting)) {
+		if (WARN_ON_ONCE(atomic_dec_and_test(&trc_n_readers_need_end)))
+			wake_up(&trc_wait);
+		// Mark as checked after decrement to avoid false
+		// positives on the above WARN_ON_ONCE().
+		WRITE_ONCE(t->trc_reader_checked, true);
+		goto reset_ipi;
+	}
+	WRITE_ONCE(t->trc_reader_checked, true);
+
+	// Get here if the task is in a read-side critical section.  Set
+	// its state so that it will awaken the grace-period kthread upon
+	// exit from that critical section.
+	WARN_ON_ONCE(t->trc_reader_special.b.need_qs);
+	WRITE_ONCE(t->trc_reader_special.b.need_qs, true);
+
+reset_ipi:
+	// Allow future IPIs to be sent on CPU and for task.
+	// Also order this IPI handler against any later manipulations of
+	// the intended task.
+	smp_store_release(&per_cpu(trc_ipi_to_cpu, smp_processor_id()), false); // ^^^
+	smp_store_release(&texp->trc_ipi_to_cpu, -1); // ^^^
+}
+
+/* Callback function for scheduler to check locked-down task.  */
+static bool trc_inspect_reader(struct task_struct *t, void *arg)
+{
+	int cpu = task_cpu(t);
+	bool in_qs = false;
+	bool ofl = cpu_is_offline(cpu);
+
+	if (task_curr(t)) {
+		WARN_ON_ONCE(ofl & !is_idle_task(t));
+
+		// If no chance of heavyweight readers, do it the hard way.
+		if (!ofl && !IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB))
+			return false;
+
+		// If heavyweight readers are enabled on the remote task,
+		// we can inspect its state despite its currently running.
+		// However, we cannot safely change its state.
+		n_heavy_reader_attempts++;
+		if (!ofl && // Check for "running" idle tasks on offline CPUs.
+		    !rcu_dynticks_zero_in_eqs(cpu, &t->trc_reader_nesting))
+			return false; // No quiescent state, do it the hard way.
+		n_heavy_reader_updates++;
+		if (ofl)
+			n_heavy_reader_ofl_updates++;
+		in_qs = true;
+	} else {
+		in_qs = likely(!t->trc_reader_nesting);
+	}
+
+	// Mark as checked.  Because this is called from the grace-period
+	// kthread, also remove the task from the holdout list.
+	t->trc_reader_checked = true;
+	trc_del_holdout(t);
+
+	if (in_qs)
+		return true;  // Already in quiescent state, done!!!
+
+	// The task is in a read-side critical section, so set up its
+	// state so that it will awaken the grace-period kthread upon exit
+	// from that critical section.
+	atomic_inc(&trc_n_readers_need_end); // One more to wait on.
+	WARN_ON_ONCE(t->trc_reader_special.b.need_qs);
+	WRITE_ONCE(t->trc_reader_special.b.need_qs, true);
+	return true;
+}
+
+/* Attempt to extract the state for the specified task. */
+static void trc_wait_for_one_reader(struct task_struct *t,
+				    struct list_head *bhp)
+{
+	int cpu;
+
+	// If a previous IPI is still in flight, let it complete.
+	if (smp_load_acquire(&t->trc_ipi_to_cpu) != -1) // Order IPI
+		return;
+
+	// The current task had better be in a quiescent state.
+	if (t == current) {
+		t->trc_reader_checked = true;
+		trc_del_holdout(t);
+		WARN_ON_ONCE(t->trc_reader_nesting);
+		return;
+	}
+
+	// Attempt to nail down the task for inspection.
+	get_task_struct(t);
+	if (try_invoke_on_locked_down_task(t, trc_inspect_reader, NULL)) {
+		put_task_struct(t);
+		return;
+	}
+	put_task_struct(t);
+
+	// If currently running, send an IPI, either way, add to list.
+	trc_add_holdout(t, bhp);
+	if (task_curr(t) && time_after(jiffies, rcu_tasks_trace.gp_start + rcu_task_ipi_delay)) {
+		// The task is currently running, so try IPIing it.
+		cpu = task_cpu(t);
+
+		// If there is already an IPI outstanding, let it happen.
+		if (per_cpu(trc_ipi_to_cpu, cpu) || t->trc_ipi_to_cpu >= 0)
+			return;
+
+		atomic_inc(&trc_n_readers_need_end);
+		per_cpu(trc_ipi_to_cpu, cpu) = true;
+		t->trc_ipi_to_cpu = cpu;
+		rcu_tasks_trace.n_ipis++;
+		if (smp_call_function_single(cpu,
+					     trc_read_check_handler, t, 0)) {
+			// Just in case there is some other reason for
+			// failure than the target CPU being offline.
+			rcu_tasks_trace.n_ipis_fails++;
+			per_cpu(trc_ipi_to_cpu, cpu) = false;
+			t->trc_ipi_to_cpu = cpu;
+			if (atomic_dec_and_test(&trc_n_readers_need_end)) {
+				WARN_ON_ONCE(1);
+				wake_up(&trc_wait);
+			}
+		}
+	}
+}
+
+/* Initialize for a new RCU-tasks-trace grace period. */
+static void rcu_tasks_trace_pregp_step(void)
+{
+	int cpu;
+
+	// Allow for fast-acting IPIs.
+	atomic_set(&trc_n_readers_need_end, 1);
+
+	// There shouldn't be any old IPIs, but...
+	for_each_possible_cpu(cpu)
+		WARN_ON_ONCE(per_cpu(trc_ipi_to_cpu, cpu));
+
+	// Disable CPU hotplug across the tasklist scan.
+	// This also waits for all readers in CPU-hotplug code paths.
+	cpus_read_lock();
+}
+
+/* Do first-round processing for the specified task. */
+static void rcu_tasks_trace_pertask(struct task_struct *t,
+				    struct list_head *hop)
+{
+	WRITE_ONCE(t->trc_reader_special.b.need_qs, false);
+	WRITE_ONCE(t->trc_reader_checked, false);
+	t->trc_ipi_to_cpu = -1;
+	trc_wait_for_one_reader(t, hop);
+}
+
+/*
+ * Do intermediate processing between task and holdout scans and
+ * pick up the idle tasks.
+ */
+static void rcu_tasks_trace_postscan(struct list_head *hop)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		rcu_tasks_trace_pertask(idle_task(cpu), hop);
+
+	// Re-enable CPU hotplug now that the tasklist scan has completed.
+	cpus_read_unlock();
+
+	// Wait for late-stage exiting tasks to finish exiting.
+	// These might have passed the call to exit_tasks_rcu_finish().
+	synchronize_rcu();
+	// Any tasks that exit after this point will set ->trc_reader_checked.
+}
+
+/* Show the state of a task stalling the current RCU tasks trace GP. */
+static void show_stalled_task_trace(struct task_struct *t, bool *firstreport)
+{
+	int cpu;
+
+	if (*firstreport) {
+		pr_err("INFO: rcu_tasks_trace detected stalls on tasks:\n");
+		*firstreport = false;
+	}
+	// FIXME: This should attempt to use try_invoke_on_nonrunning_task().
+	cpu = task_cpu(t);
+	pr_alert("P%d: %c%c%c nesting: %d%c cpu: %d\n",
+		 t->pid,
+		 ".I"[READ_ONCE(t->trc_ipi_to_cpu) > 0],
+		 ".i"[is_idle_task(t)],
+		 ".N"[cpu > 0 && tick_nohz_full_cpu(cpu)],
+		 t->trc_reader_nesting,
+		 " N"[!!t->trc_reader_special.b.need_qs],
+		 cpu);
+	sched_show_task(t);
+}
+
+/* List stalled IPIs for RCU tasks trace. */
+static void show_stalled_ipi_trace(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		if (per_cpu(trc_ipi_to_cpu, cpu))
+			pr_alert("\tIPI outstanding to CPU %d\n", cpu);
+}
+
+/* Do one scan of the holdout list. */
+static void check_all_holdout_tasks_trace(struct list_head *hop,
+					  bool needreport, bool *firstreport)
+{
+	struct task_struct *g, *t;
+
+	// Disable CPU hotplug across the holdout list scan.
+	cpus_read_lock();
+
+	list_for_each_entry_safe(t, g, hop, trc_holdout_list) {
+		// If safe and needed, try to check the current task.
+		if (READ_ONCE(t->trc_ipi_to_cpu) == -1 &&
+		    !READ_ONCE(t->trc_reader_checked))
+			trc_wait_for_one_reader(t, hop);
+
+		// If check succeeded, remove this task from the list.
+		if (READ_ONCE(t->trc_reader_checked))
+			trc_del_holdout(t);
+		else if (needreport)
+			show_stalled_task_trace(t, firstreport);
+	}
+
+	// Re-enable CPU hotplug now that the holdout list scan has completed.
+	cpus_read_unlock();
+
+	if (needreport) {
+		if (firstreport)
+			pr_err("INFO: rcu_tasks_trace detected stalls? (Late IPI?)\n");
+		show_stalled_ipi_trace();
+	}
+}
+
+/* Wait for grace period to complete and provide ordering. */
+static void rcu_tasks_trace_postgp(struct rcu_tasks *rtp)
+{
+	bool firstreport;
+	struct task_struct *g, *t;
+	LIST_HEAD(holdouts);
+	long ret;
+
+	// Remove the safety count.
+	smp_mb__before_atomic();  // Order vs. earlier atomics
+	atomic_dec(&trc_n_readers_need_end);
+	smp_mb__after_atomic();  // Order vs. later atomics
+
+	// Wait for readers.
+	set_tasks_gp_state(rtp, RTGS_WAIT_READERS);
+	for (;;) {
+		ret = wait_event_idle_exclusive_timeout(
+				trc_wait,
+				atomic_read(&trc_n_readers_need_end) == 0,
+				READ_ONCE(rcu_task_stall_timeout));
+		if (ret)
+			break;  // Count reached zero.
+		// Stall warning time, so make a list of the offenders.
+		for_each_process_thread(g, t)
+			if (READ_ONCE(t->trc_reader_special.b.need_qs))
+				trc_add_holdout(t, &holdouts);
+		firstreport = true;
+		list_for_each_entry_safe(t, g, &holdouts, trc_holdout_list)
+			if (READ_ONCE(t->trc_reader_special.b.need_qs)) {
+				show_stalled_task_trace(t, &firstreport);
+				trc_del_holdout(t);
+			}
+		if (firstreport)
+			pr_err("INFO: rcu_tasks_trace detected stalls? (Counter/taskslist mismatch?)\n");
+		show_stalled_ipi_trace();
+		pr_err("\t%d holdouts\n", atomic_read(&trc_n_readers_need_end));
+	}
+	smp_mb(); // Caller's code must be ordered after wakeup.
+		  // Pairs with pretty much every ordering primitive.
+}
+
+/* Report any needed quiescent state for this exiting task. */
+static void exit_tasks_rcu_finish_trace(struct task_struct *t)
+{
+	WRITE_ONCE(t->trc_reader_checked, true);
+	WARN_ON_ONCE(t->trc_reader_nesting);
+	WRITE_ONCE(t->trc_reader_nesting, 0);
+	if (WARN_ON_ONCE(READ_ONCE(t->trc_reader_special.b.need_qs)))
+		rcu_read_unlock_trace_special(t, 0);
+}
+
+/**
+ * call_rcu_tasks_trace() - Queue a callback trace task-based grace period
+ * @rhp: structure to be used for queueing the RCU updates.
+ * @func: actual callback function to be invoked after the grace period
+ *
+ * The callback function will be invoked some time after a full grace
+ * period elapses, in other words after all currently executing RCU
+ * read-side critical sections have completed. call_rcu_tasks_trace()
+ * assumes that the read-side critical sections end at context switch,
+ * cond_resched_rcu_qs(), or transition to usermode execution.  As such,
+ * there are no read-side primitives analogous to rcu_read_lock() and
+ * rcu_read_unlock() because this primitive is intended to determine
+ * that all tasks have passed through a safe state, not so much for
+ * data-strcuture synchronization.
+ *
+ * See the description of call_rcu() for more detailed information on
+ * memory ordering guarantees.
+ */
+void call_rcu_tasks_trace(struct rcu_head *rhp, rcu_callback_t func)
+{
+	call_rcu_tasks_generic(rhp, func, &rcu_tasks_trace);
+}
+EXPORT_SYMBOL_GPL(call_rcu_tasks_trace);
+
+/**
+ * synchronize_rcu_tasks_trace - wait for a trace rcu-tasks grace period
+ *
+ * Control will return to the caller some time after a trace rcu-tasks
+ * grace period has elapsed, in other words after all currently
+ * executing rcu-tasks read-side critical sections have elapsed.  These
+ * read-side critical sections are delimited by calls to schedule(),
+ * cond_resched_tasks_rcu_qs(), userspace execution, and (in theory,
+ * anyway) cond_resched().
+ *
+ * This is a very specialized primitive, intended only for a few uses in
+ * tracing and other situations requiring manipulation of function preambles
+ * and profiling hooks.  The synchronize_rcu_tasks_trace() function is not
+ * (yet) intended for heavy use from multiple CPUs.
+ *
+ * See the description of synchronize_rcu() for more detailed information
+ * on memory ordering guarantees.
+ */
+void synchronize_rcu_tasks_trace(void)
+{
+	RCU_LOCKDEP_WARN(lock_is_held(&rcu_trace_lock_map), "Illegal synchronize_rcu_tasks_trace() in RCU Tasks Trace read-side critical section");
+	synchronize_rcu_tasks_generic(&rcu_tasks_trace);
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_tasks_trace);
+
+/**
+ * rcu_barrier_tasks_trace - Wait for in-flight call_rcu_tasks_trace() callbacks.
+ *
+ * Although the current implementation is guaranteed to wait, it is not
+ * obligated to, for example, if there are no pending callbacks.
+ */
+void rcu_barrier_tasks_trace(void)
+{
+	/* There is only one callback queue, so this is easy.  ;-) */
+	synchronize_rcu_tasks_trace();
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_tasks_trace);
+
+static int __init rcu_spawn_tasks_trace_kthread(void)
+{
+	rcu_tasks_trace.pregp_func = rcu_tasks_trace_pregp_step;
+	rcu_tasks_trace.pertask_func = rcu_tasks_trace_pertask;
+	rcu_tasks_trace.postscan_func = rcu_tasks_trace_postscan;
+	rcu_tasks_trace.holdouts_func = check_all_holdout_tasks_trace;
+	rcu_tasks_trace.postgp_func = rcu_tasks_trace_postgp;
+	rcu_spawn_tasks_kthread_generic(&rcu_tasks_trace);
+	return 0;
+}
+core_initcall(rcu_spawn_tasks_trace_kthread);
+
+static void show_rcu_tasks_trace_gp_kthread(void)
+{
+	char buf[64];
+
+	sprintf(buf, "N%d h:%lu/%lu/%lu", atomic_read(&trc_n_readers_need_end),
+		data_race(n_heavy_reader_ofl_updates),
+		data_race(n_heavy_reader_updates),
+		data_race(n_heavy_reader_attempts));
+	show_rcu_tasks_generic_gp_kthread(&rcu_tasks_trace, buf);
+}
+
+#else /* #ifdef CONFIG_TASKS_TRACE_RCU */
+static void exit_tasks_rcu_finish_trace(struct task_struct *t) { }
+static inline void show_rcu_tasks_trace_gp_kthread(void) {}
+#endif /* #else #ifdef CONFIG_TASKS_TRACE_RCU */
+
+void show_rcu_tasks_gp_kthreads(void)
+{
+	show_rcu_tasks_classic_gp_kthread();
+	show_rcu_tasks_rude_gp_kthread();
+	show_rcu_tasks_trace_gp_kthread();
+}
+
+#else /* #ifdef CONFIG_TASKS_RCU_GENERIC */
+static inline void rcu_tasks_bootup_oddness(void) {}
+void show_rcu_tasks_gp_kthreads(void) {}
+#endif /* #else #ifdef CONFIG_TASKS_RCU_GENERIC */
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index d9a49cd6065a..6d39485f7f51 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -67,6 +67,19 @@
 #endif
 #define MODULE_PARAM_PREFIX "rcutree."
 
+#ifndef data_race
+#define data_race(expr)							\
+	({								\
+		expr;							\
+	})
+#endif
+#ifndef ASSERT_EXCLUSIVE_WRITER
+#define ASSERT_EXCLUSIVE_WRITER(var) do { } while (0)
+#endif
+#ifndef ASSERT_EXCLUSIVE_ACCESS
+#define ASSERT_EXCLUSIVE_ACCESS(var) do { } while (0)
+#endif
+
 /* Data structures. */
 
 /*
@@ -100,7 +113,7 @@ static struct rcu_state rcu_state = {
 static bool dump_tree;
 module_param(dump_tree, bool, 0444);
 /* By default, use RCU_SOFTIRQ instead of rcuc kthreads. */
-static bool use_softirq = 1;
+static bool use_softirq = true;
 module_param(use_softirq, bool, 0444);
 /* Control rcu_node-tree auto-balancing at boot time. */
 static bool rcu_fanout_exact;
@@ -225,7 +238,9 @@ void rcu_softirq_qs(void)
 
 /*
  * Record entry into an extended quiescent state.  This is only to be
- * called when not already in an extended quiescent state.
+ * called when not already in an extended quiescent state, that is,
+ * RCU is watching prior to the call to this function and is no longer
+ * watching upon return.
  */
 static void rcu_dynticks_eqs_enter(void)
 {
@@ -237,8 +252,9 @@ static void rcu_dynticks_eqs_enter(void)
 	 * critical sections, and we also must force ordering with the
 	 * next idle sojourn.
 	 */
+	rcu_dynticks_task_trace_enter();  // Before ->dynticks update!
 	seq = atomic_add_return(RCU_DYNTICK_CTRL_CTR, &rdp->dynticks);
-	/* Better be in an extended quiescent state! */
+	// RCU is no longer watching.  Better be in extended quiescent state!
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) &&
 		     (seq & RCU_DYNTICK_CTRL_CTR));
 	/* Better not have special action (TLB flush) pending! */
@@ -248,7 +264,8 @@ static void rcu_dynticks_eqs_enter(void)
 
 /*
  * Record exit from an extended quiescent state.  This is only to be
- * called from an extended quiescent state.
+ * called from an extended quiescent state, that is, RCU is not watching
+ * prior to the call to this function and is watching upon return.
  */
 static void rcu_dynticks_eqs_exit(void)
 {
@@ -261,6 +278,8 @@ static void rcu_dynticks_eqs_exit(void)
 	 * critical section.
 	 */
 	seq = atomic_add_return(RCU_DYNTICK_CTRL_CTR, &rdp->dynticks);
+	// RCU is now watching.  Better not be in an extended quiescent state!
+	rcu_dynticks_task_trace_exit();  // After ->dynticks update!
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) &&
 		     !(seq & RCU_DYNTICK_CTRL_CTR));
 	if (seq & RCU_DYNTICK_CTRL_MASK) {
@@ -332,6 +351,28 @@ static bool rcu_dynticks_in_eqs_since(struct rcu_data *rdp, int snap)
 	return snap != rcu_dynticks_snap(rdp);
 }
 
+/*
+ * Return true if the referenced integer is zero while the specified
+ * CPU remains within a single extended quiescent state.
+ */
+bool rcu_dynticks_zero_in_eqs(int cpu, int *vp)
+{
+	struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu);
+	int snap;
+
+	// If not quiescent, force back to earlier extended quiescent state.
+	snap = atomic_read(&rdp->dynticks) & ~(RCU_DYNTICK_CTRL_MASK |
+					       RCU_DYNTICK_CTRL_CTR);
+
+	smp_rmb(); // Order ->dynticks and *vp reads.
+	if (READ_ONCE(*vp))
+		return false;  // Non-zero, so report failure;
+	smp_rmb(); // Order *vp read and ->dynticks re-read.
+
+	// If still in the same extended quiescent state, we are good!
+	return snap == (atomic_read(&rdp->dynticks) & ~RCU_DYNTICK_CTRL_MASK);
+}
+
 /*
  * Set the special (bottom) bit of the specified CPU so that it
  * will take special action (such as flushing its TLB) on the
@@ -571,6 +612,7 @@ static void rcu_eqs_enter(bool user)
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) &&
 		     rdp->dynticks_nesting == 0);
 	if (rdp->dynticks_nesting != 1) {
+		// RCU will still be watching, so just do accounting and leave.
 		rdp->dynticks_nesting--;
 		return;
 	}
@@ -583,7 +625,9 @@ static void rcu_eqs_enter(bool user)
 	rcu_prepare_for_idle();
 	rcu_preempt_deferred_qs(current);
 	WRITE_ONCE(rdp->dynticks_nesting, 0); /* Avoid irq-access tearing. */
+	// RCU is watching here ...
 	rcu_dynticks_eqs_enter();
+	// ... but is no longer watching here.
 	rcu_dynticks_task_enter();
 }
 
@@ -663,7 +707,9 @@ static __always_inline void rcu_nmi_exit_common(bool irq)
 	if (irq)
 		rcu_prepare_for_idle();
 
+	// RCU is watching here ...
 	rcu_dynticks_eqs_enter();
+	// ... but is no longer watching here.
 
 	if (irq)
 		rcu_dynticks_task_enter();
@@ -738,11 +784,14 @@ static void rcu_eqs_exit(bool user)
 	oldval = rdp->dynticks_nesting;
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && oldval < 0);
 	if (oldval) {
+		// RCU was already watching, so just do accounting and leave.
 		rdp->dynticks_nesting++;
 		return;
 	}
 	rcu_dynticks_task_exit();
+	// RCU is not watching here ...
 	rcu_dynticks_eqs_exit();
+	// ... but is watching here.
 	rcu_cleanup_after_idle();
 	trace_rcu_dyntick(TPS("End"), rdp->dynticks_nesting, 1, atomic_read(&rdp->dynticks));
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !user && !is_idle_task(current));
@@ -819,7 +868,9 @@ static __always_inline void rcu_nmi_enter_common(bool irq)
 		if (irq)
 			rcu_dynticks_task_exit();
 
+		// RCU is not watching here ...
 		rcu_dynticks_eqs_exit();
+		// ... but is watching here.
 
 		if (irq)
 			rcu_cleanup_after_idle();
@@ -829,9 +880,16 @@ static __always_inline void rcu_nmi_enter_common(bool irq)
 		   rdp->dynticks_nmi_nesting == DYNTICK_IRQ_NONIDLE &&
 		   READ_ONCE(rdp->rcu_urgent_qs) &&
 		   !READ_ONCE(rdp->rcu_forced_tick)) {
+		// We get here only if we had already exited the extended
+		// quiescent state and this was an interrupt (not an NMI).
+		// Therefore, (1) RCU is already watching and (2) The fact
+		// that we are in an interrupt handler and that the rcu_node
+		// lock is an irq-disabled lock prevents self-deadlock.
+		// So we can safely recheck under the lock.
 		raw_spin_lock_rcu_node(rdp->mynode);
-		// Recheck under lock.
 		if (rdp->rcu_urgent_qs && !rdp->rcu_forced_tick) {
+			// A nohz_full CPU is in the kernel and RCU
+			// needs a quiescent state.  Turn on the tick!
 			WRITE_ONCE(rdp->rcu_forced_tick, true);
 			tick_dep_set_cpu(rdp->cpu, TICK_DEP_BIT_RCU);
 		}
@@ -1217,7 +1275,7 @@ static bool rcu_start_this_gp(struct rcu_node *rnp_start, struct rcu_data *rdp,
 		trace_rcu_this_gp(rnp, rdp, gp_seq_req, TPS("NoGPkthread"));
 		goto unlock_out;
 	}
-	trace_rcu_grace_period(rcu_state.name, rcu_state.gp_seq, TPS("newreq"));
+	trace_rcu_grace_period(rcu_state.name, data_race(rcu_state.gp_seq), TPS("newreq"));
 	ret = true;  /* Caller must wake GP kthread. */
 unlock_out:
 	/* Push furthest requested GP to leaf node and rcu_data structure. */
@@ -1473,6 +1531,31 @@ static void rcu_gp_slow(int delay)
 		schedule_timeout_uninterruptible(delay);
 }
 
+static unsigned long sleep_duration;
+
+/* Allow rcutorture to stall the grace-period kthread. */
+void rcu_gp_set_torture_wait(int duration)
+{
+	if (IS_ENABLED(CONFIG_RCU_TORTURE_TEST) && duration > 0)
+		WRITE_ONCE(sleep_duration, duration);
+}
+EXPORT_SYMBOL_GPL(rcu_gp_set_torture_wait);
+
+/* Actually implement the aforementioned wait. */
+static void rcu_gp_torture_wait(void)
+{
+	unsigned long duration;
+
+	if (!IS_ENABLED(CONFIG_RCU_TORTURE_TEST))
+		return;
+	duration = xchg(&sleep_duration, 0UL);
+	if (duration > 0) {
+		pr_alert("%s: Waiting %lu jiffies\n", __func__, duration);
+		schedule_timeout_uninterruptible(duration);
+		pr_alert("%s: Wait complete\n", __func__);
+	}
+}
+
 /*
  * Initialize a new grace period.  Return false if no grace period required.
  */
@@ -1506,6 +1589,7 @@ static bool rcu_gp_init(void)
 	record_gp_stall_check_time();
 	/* Record GP times before starting GP, hence rcu_seq_start(). */
 	rcu_seq_start(&rcu_state.gp_seq);
+	ASSERT_EXCLUSIVE_WRITER(rcu_state.gp_seq);
 	trace_rcu_grace_period(rcu_state.name, rcu_state.gp_seq, TPS("start"));
 	raw_spin_unlock_irq_rcu_node(rnp);
 
@@ -1611,12 +1695,16 @@ static bool rcu_gp_fqs_check_wake(int *gfp)
 {
 	struct rcu_node *rnp = rcu_get_root();
 
-	/* Someone like call_rcu() requested a force-quiescent-state scan. */
+	// If under overload conditions, force an immediate FQS scan.
+	if (*gfp & RCU_GP_FLAG_OVLD)
+		return true;
+
+	// Someone like call_rcu() requested a force-quiescent-state scan.
 	*gfp = READ_ONCE(rcu_state.gp_flags);
 	if (*gfp & RCU_GP_FLAG_FQS)
 		return true;
 
-	/* The current grace period has completed. */
+	// The current grace period has completed.
 	if (!READ_ONCE(rnp->qsmask) && !rcu_preempt_blocked_readers_cgp(rnp))
 		return true;
 
@@ -1654,13 +1742,15 @@ static void rcu_gp_fqs(bool first_time)
 static void rcu_gp_fqs_loop(void)
 {
 	bool first_gp_fqs;
-	int gf;
+	int gf = 0;
 	unsigned long j;
 	int ret;
 	struct rcu_node *rnp = rcu_get_root();
 
 	first_gp_fqs = true;
 	j = READ_ONCE(jiffies_till_first_fqs);
+	if (rcu_state.cbovld)
+		gf = RCU_GP_FLAG_OVLD;
 	ret = 0;
 	for (;;) {
 		if (!ret) {
@@ -1673,6 +1763,7 @@ static void rcu_gp_fqs_loop(void)
 		rcu_state.gp_state = RCU_GP_WAIT_FQS;
 		ret = swait_event_idle_timeout_exclusive(
 				rcu_state.gp_wq, rcu_gp_fqs_check_wake(&gf), j);
+		rcu_gp_torture_wait();
 		rcu_state.gp_state = RCU_GP_DOING_FQS;
 		/* Locking provides needed memory barriers. */
 		/* If grace period done, leave loop. */
@@ -1680,12 +1771,16 @@ static void rcu_gp_fqs_loop(void)
 		    !rcu_preempt_blocked_readers_cgp(rnp))
 			break;
 		/* If time for quiescent-state forcing, do it. */
-		if (ULONG_CMP_GE(jiffies, rcu_state.jiffies_force_qs) ||
+		if (!time_after(rcu_state.jiffies_force_qs, jiffies) ||
 		    (gf & RCU_GP_FLAG_FQS)) {
 			trace_rcu_grace_period(rcu_state.name, rcu_state.gp_seq,
 					       TPS("fqsstart"));
 			rcu_gp_fqs(first_gp_fqs);
-			first_gp_fqs = false;
+			gf = 0;
+			if (first_gp_fqs) {
+				first_gp_fqs = false;
+				gf = rcu_state.cbovld ? RCU_GP_FLAG_OVLD : 0;
+			}
 			trace_rcu_grace_period(rcu_state.name, rcu_state.gp_seq,
 					       TPS("fqsend"));
 			cond_resched_tasks_rcu_qs();
@@ -1705,6 +1800,7 @@ static void rcu_gp_fqs_loop(void)
 				j = 1;
 			else
 				j = rcu_state.jiffies_force_qs - j;
+			gf = 0;
 		}
 	}
 }
@@ -1781,6 +1877,7 @@ static void rcu_gp_cleanup(void)
 	/* Declare grace period done, trace first to use old GP number. */
 	trace_rcu_grace_period(rcu_state.name, rcu_state.gp_seq, TPS("end"));
 	rcu_seq_end(&rcu_state.gp_seq);
+	ASSERT_EXCLUSIVE_WRITER(rcu_state.gp_seq);
 	rcu_state.gp_state = RCU_GP_IDLE;
 	/* Check for GP requests since above loop. */
 	rdp = this_cpu_ptr(&rcu_data);
@@ -1821,6 +1918,7 @@ static int __noreturn rcu_gp_kthread(void *unused)
 			swait_event_idle_exclusive(rcu_state.gp_wq,
 					 READ_ONCE(rcu_state.gp_flags) &
 					 RCU_GP_FLAG_INIT);
+			rcu_gp_torture_wait();
 			rcu_state.gp_state = RCU_GP_DONE_GPS;
 			/* Locking provides needed memory barrier. */
 			if (rcu_gp_init())
@@ -2811,6 +2909,8 @@ struct kfree_rcu_cpu {
 	struct delayed_work monitor_work;
 	bool monitor_todo;
 	bool initialized;
+	// Number of objects for which GP not started
+	int count;
 };
 
 static DEFINE_PER_CPU(struct kfree_rcu_cpu, krc);
@@ -2924,6 +3024,8 @@ static inline bool queue_kfree_rcu_work(struct kfree_rcu_cpu *krcp)
 				krcp->head = NULL;
 			}
 
+			WRITE_ONCE(krcp->count, 0);
+
 			/*
 			 * One work is per one batch, so there are two "free channels",
 			 * "bhead_free" and "head_free" the batch can handle. It can be
@@ -3060,6 +3162,8 @@ void kfree_call_rcu(struct rcu_head *head, rcu_callback_t func)
 		krcp->head = head;
 	}
 
+	WRITE_ONCE(krcp->count, krcp->count + 1);
+
 	// Set timer to drain after KFREE_DRAIN_JIFFIES.
 	if (rcu_scheduler_active == RCU_SCHEDULER_RUNNING &&
 	    !krcp->monitor_todo) {
@@ -3074,6 +3178,56 @@ void kfree_call_rcu(struct rcu_head *head, rcu_callback_t func)
 }
 EXPORT_SYMBOL_GPL(kfree_call_rcu);
 
+static unsigned long
+kfree_rcu_shrink_count(struct shrinker *shrink, struct shrink_control *sc)
+{
+	int cpu;
+	unsigned long count = 0;
+
+	/* Snapshot count of all CPUs */
+	for_each_online_cpu(cpu) {
+		struct kfree_rcu_cpu *krcp = per_cpu_ptr(&krc, cpu);
+
+		count += READ_ONCE(krcp->count);
+	}
+
+	return count;
+}
+
+static unsigned long
+kfree_rcu_shrink_scan(struct shrinker *shrink, struct shrink_control *sc)
+{
+	int cpu, freed = 0;
+	unsigned long flags;
+
+	for_each_online_cpu(cpu) {
+		int count;
+		struct kfree_rcu_cpu *krcp = per_cpu_ptr(&krc, cpu);
+
+		count = krcp->count;
+		spin_lock_irqsave(&krcp->lock, flags);
+		if (krcp->monitor_todo)
+			kfree_rcu_drain_unlock(krcp, flags);
+		else
+			spin_unlock_irqrestore(&krcp->lock, flags);
+
+		sc->nr_to_scan -= count;
+		freed += count;
+
+		if (sc->nr_to_scan <= 0)
+			break;
+	}
+
+	return freed;
+}
+
+static struct shrinker kfree_rcu_shrinker = {
+	.count_objects = kfree_rcu_shrink_count,
+	.scan_objects = kfree_rcu_shrink_scan,
+	.batch = 0,
+	.seeks = DEFAULT_SEEKS,
+};
+
 void __init kfree_rcu_scheduler_running(void)
 {
 	int cpu;
@@ -3578,10 +3732,9 @@ void rcu_cpu_starting(unsigned int cpu)
 {
 	unsigned long flags;
 	unsigned long mask;
-	int nbits;
-	unsigned long oldmask;
 	struct rcu_data *rdp;
 	struct rcu_node *rnp;
+	bool newcpu;
 
 	if (per_cpu(rcu_cpu_started, cpu))
 		return;
@@ -3593,12 +3746,11 @@ void rcu_cpu_starting(unsigned int cpu)
 	mask = rdp->grpmask;
 	raw_spin_lock_irqsave_rcu_node(rnp, flags);
 	WRITE_ONCE(rnp->qsmaskinitnext, rnp->qsmaskinitnext | mask);
-	oldmask = rnp->expmaskinitnext;
+	newcpu = !(rnp->expmaskinitnext & mask);
 	rnp->expmaskinitnext |= mask;
-	oldmask ^= rnp->expmaskinitnext;
-	nbits = bitmap_weight(&oldmask, BITS_PER_LONG);
 	/* Allow lockless access for expedited grace periods. */
-	smp_store_release(&rcu_state.ncpus, rcu_state.ncpus + nbits); /* ^^^ */
+	smp_store_release(&rcu_state.ncpus, rcu_state.ncpus + newcpu); /* ^^^ */
+	ASSERT_EXCLUSIVE_WRITER(rcu_state.ncpus);
 	rcu_gpnum_ovf(rnp, rdp); /* Offline-induced counter wrap? */
 	rdp->rcu_onl_gp_seq = READ_ONCE(rcu_state.gp_seq);
 	rdp->rcu_onl_gp_flags = READ_ONCE(rcu_state.gp_flags);
@@ -3994,6 +4146,8 @@ static void __init kfree_rcu_batch_init(void)
 		INIT_DELAYED_WORK(&krcp->monitor_work, kfree_rcu_monitor);
 		krcp->initialized = true;
 	}
+	if (register_shrinker(&kfree_rcu_shrinker))
+		pr_err("Failed to register kfree_rcu() shrinker!\n");
 }
 
 void __init rcu_init(void)
diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h
index 9dc2ec021da5..43991a40b084 100644
--- a/kernel/rcu/tree.h
+++ b/kernel/rcu/tree.h
@@ -359,6 +359,7 @@ struct rcu_state {
 /* Values for rcu_state structure's gp_flags field. */
 #define RCU_GP_FLAG_INIT 0x1	/* Need grace-period initialization. */
 #define RCU_GP_FLAG_FQS  0x2	/* Need grace-period quiescent-state forcing. */
+#define RCU_GP_FLAG_OVLD 0x4	/* Experiencing callback overload. */
 
 /* Values for rcu_state structure's gp_state field. */
 #define RCU_GP_IDLE	 0	/* Initial state and no GP in progress. */
@@ -454,6 +455,8 @@ static void rcu_bind_gp_kthread(void);
 static bool rcu_nohz_full_cpu(void);
 static void rcu_dynticks_task_enter(void);
 static void rcu_dynticks_task_exit(void);
+static void rcu_dynticks_task_trace_enter(void);
+static void rcu_dynticks_task_trace_exit(void);
 
 /* Forward declarations for tree_stall.h */
 static void record_gp_stall_check_time(void);
diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
index 1a617b9dffb0..72952edad1e4 100644
--- a/kernel/rcu/tree_exp.h
+++ b/kernel/rcu/tree_exp.h
@@ -150,7 +150,7 @@ static void __maybe_unused sync_exp_reset_tree(void)
 static bool sync_rcu_exp_done(struct rcu_node *rnp)
 {
 	raw_lockdep_assert_held_rcu_node(rnp);
-	return rnp->exp_tasks == NULL &&
+	return READ_ONCE(rnp->exp_tasks) == NULL &&
 	       READ_ONCE(rnp->expmask) == 0;
 }
 
@@ -373,7 +373,7 @@ static void sync_rcu_exp_select_node_cpus(struct work_struct *wp)
 	 * until such time as the ->expmask bits are cleared.
 	 */
 	if (rcu_preempt_has_tasks(rnp))
-		rnp->exp_tasks = rnp->blkd_tasks.next;
+		WRITE_ONCE(rnp->exp_tasks, rnp->blkd_tasks.next);
 	raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
 
 	/* IPI the remaining CPUs for expedited quiescent state. */
@@ -542,8 +542,8 @@ static void synchronize_rcu_expedited_wait(void)
 		}
 		pr_cont(" } %lu jiffies s: %lu root: %#lx/%c\n",
 			jiffies - jiffies_start, rcu_state.expedited_sequence,
-			READ_ONCE(rnp_root->expmask),
-			".T"[!!rnp_root->exp_tasks]);
+			data_race(rnp_root->expmask),
+			".T"[!!data_race(rnp_root->exp_tasks)]);
 		if (ndetected) {
 			pr_err("blocking rcu_node structures:");
 			rcu_for_each_node_breadth_first(rnp) {
@@ -553,8 +553,8 @@ static void synchronize_rcu_expedited_wait(void)
 					continue;
 				pr_cont(" l=%u:%d-%d:%#lx/%c",
 					rnp->level, rnp->grplo, rnp->grphi,
-					READ_ONCE(rnp->expmask),
-					".T"[!!rnp->exp_tasks]);
+					data_race(rnp->expmask),
+					".T"[!!data_race(rnp->exp_tasks)]);
 			}
 			pr_cont("\n");
 		}
@@ -639,6 +639,7 @@ static void wait_rcu_exp_gp(struct work_struct *wp)
  */
 static void rcu_exp_handler(void *unused)
 {
+	int depth = rcu_preempt_depth();
 	unsigned long flags;
 	struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
 	struct rcu_node *rnp = rdp->mynode;
@@ -649,7 +650,7 @@ static void rcu_exp_handler(void *unused)
 	 * critical section.  If also enabled or idle, immediately
 	 * report the quiescent state, otherwise defer.
 	 */
-	if (!rcu_preempt_depth()) {
+	if (!depth) {
 		if (!(preempt_count() & (PREEMPT_MASK | SOFTIRQ_MASK)) ||
 		    rcu_dynticks_curr_cpu_in_eqs()) {
 			rcu_report_exp_rdp(rdp);
@@ -673,7 +674,7 @@ static void rcu_exp_handler(void *unused)
 	 * can have caused this quiescent state to already have been
 	 * reported, so we really do need to check ->expmask.
 	 */
-	if (rcu_preempt_depth() > 0) {
+	if (depth > 0) {
 		raw_spin_lock_irqsave_rcu_node(rnp, flags);
 		if (rnp->expmask & rdp->grpmask) {
 			rdp->exp_deferred_qs = true;
@@ -683,30 +684,8 @@ static void rcu_exp_handler(void *unused)
 		return;
 	}
 
-	/*
-	 * The final and least likely case is where the interrupted
-	 * code was just about to or just finished exiting the RCU-preempt
-	 * read-side critical section, and no, we can't tell which.
-	 * So either way, set ->deferred_qs to flag later code that
-	 * a quiescent state is required.
-	 *
-	 * If the CPU is fully enabled (or if some buggy RCU-preempt
-	 * read-side critical section is being used from idle), just
-	 * invoke rcu_preempt_deferred_qs() to immediately report the
-	 * quiescent state.  We cannot use rcu_read_unlock_special()
-	 * because we are in an interrupt handler, which will cause that
-	 * function to take an early exit without doing anything.
-	 *
-	 * Otherwise, force a context switch after the CPU enables everything.
-	 */
-	rdp->exp_deferred_qs = true;
-	if (!(preempt_count() & (PREEMPT_MASK | SOFTIRQ_MASK)) ||
-	    WARN_ON_ONCE(rcu_dynticks_curr_cpu_in_eqs())) {
-		rcu_preempt_deferred_qs(t);
-	} else {
-		set_tsk_need_resched(t);
-		set_preempt_need_resched();
-	}
+	// Finally, negative nesting depth should not happen.
+	WARN_ON_ONCE(1);
 }
 
 /* PREEMPTION=y, so no PREEMPTION=n expedited grace period to clean up after. */
@@ -721,17 +700,20 @@ static void sync_sched_exp_online_cleanup(int cpu)
  */
 static int rcu_print_task_exp_stall(struct rcu_node *rnp)
 {
-	struct task_struct *t;
+	unsigned long flags;
 	int ndetected = 0;
+	struct task_struct *t;
 
-	if (!rnp->exp_tasks)
+	if (!READ_ONCE(rnp->exp_tasks))
 		return 0;
+	raw_spin_lock_irqsave_rcu_node(rnp, flags);
 	t = list_entry(rnp->exp_tasks->prev,
 		       struct task_struct, rcu_node_entry);
 	list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) {
 		pr_cont(" P%d", t->pid);
 		ndetected++;
 	}
+	raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
 	return ndetected;
 }
 
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index 097635c41135..50caa3fcbad2 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -226,7 +226,7 @@ static void rcu_preempt_ctxt_queue(struct rcu_node *rnp, struct rcu_data *rdp)
 		WARN_ON_ONCE(rnp->completedqs == rnp->gp_seq);
 	}
 	if (!rnp->exp_tasks && (blkd_state & RCU_EXP_BLKD))
-		rnp->exp_tasks = &t->rcu_node_entry;
+		WRITE_ONCE(rnp->exp_tasks, &t->rcu_node_entry);
 	WARN_ON_ONCE(!(blkd_state & RCU_GP_BLKD) !=
 		     !(rnp->qsmask & rdp->grpmask));
 	WARN_ON_ONCE(!(blkd_state & RCU_EXP_BLKD) !=
@@ -331,6 +331,7 @@ void rcu_note_context_switch(bool preempt)
 	rcu_qs();
 	if (rdp->exp_deferred_qs)
 		rcu_report_exp_rdp(rdp);
+	rcu_tasks_qs(current, preempt);
 	trace_rcu_utilization(TPS("End context switch"));
 }
 EXPORT_SYMBOL_GPL(rcu_note_context_switch);
@@ -345,9 +346,7 @@ static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp)
 	return READ_ONCE(rnp->gp_tasks) != NULL;
 }
 
-/* Bias and limit values for ->rcu_read_lock_nesting. */
-#define RCU_NEST_BIAS INT_MAX
-#define RCU_NEST_NMAX (-INT_MAX / 2)
+/* limit value for ->rcu_read_lock_nesting. */
 #define RCU_NEST_PMAX (INT_MAX / 2)
 
 static void rcu_preempt_read_enter(void)
@@ -355,9 +354,9 @@ static void rcu_preempt_read_enter(void)
 	current->rcu_read_lock_nesting++;
 }
 
-static void rcu_preempt_read_exit(void)
+static int rcu_preempt_read_exit(void)
 {
-	current->rcu_read_lock_nesting--;
+	return --current->rcu_read_lock_nesting;
 }
 
 static void rcu_preempt_depth_set(int val)
@@ -390,21 +389,15 @@ void __rcu_read_unlock(void)
 {
 	struct task_struct *t = current;
 
-	if (rcu_preempt_depth() != 1) {
-		rcu_preempt_read_exit();
-	} else {
+	if (rcu_preempt_read_exit() == 0) {
 		barrier();  /* critical section before exit code. */
-		rcu_preempt_depth_set(-RCU_NEST_BIAS);
-		barrier();  /* assign before ->rcu_read_unlock_special load */
 		if (unlikely(READ_ONCE(t->rcu_read_unlock_special.s)))
 			rcu_read_unlock_special(t);
-		barrier();  /* ->rcu_read_unlock_special load before assign */
-		rcu_preempt_depth_set(0);
 	}
 	if (IS_ENABLED(CONFIG_PROVE_LOCKING)) {
 		int rrln = rcu_preempt_depth();
 
-		WARN_ON_ONCE(rrln < 0 && rrln > RCU_NEST_NMAX);
+		WARN_ON_ONCE(rrln < 0 || rrln > RCU_NEST_PMAX);
 	}
 }
 EXPORT_SYMBOL_GPL(__rcu_read_unlock);
@@ -500,12 +493,12 @@ rcu_preempt_deferred_qs_irqrestore(struct task_struct *t, unsigned long flags)
 		if (&t->rcu_node_entry == rnp->gp_tasks)
 			WRITE_ONCE(rnp->gp_tasks, np);
 		if (&t->rcu_node_entry == rnp->exp_tasks)
-			rnp->exp_tasks = np;
+			WRITE_ONCE(rnp->exp_tasks, np);
 		if (IS_ENABLED(CONFIG_RCU_BOOST)) {
 			/* Snapshot ->boost_mtx ownership w/rnp->lock held. */
 			drop_boost_mutex = rt_mutex_owner(&rnp->boost_mtx) == t;
 			if (&t->rcu_node_entry == rnp->boost_tasks)
-				rnp->boost_tasks = np;
+				WRITE_ONCE(rnp->boost_tasks, np);
 		}
 
 		/*
@@ -556,7 +549,7 @@ static bool rcu_preempt_need_deferred_qs(struct task_struct *t)
 {
 	return (__this_cpu_read(rcu_data.exp_deferred_qs) ||
 		READ_ONCE(t->rcu_read_unlock_special.s)) &&
-	       rcu_preempt_depth() <= 0;
+	       rcu_preempt_depth() == 0;
 }
 
 /*
@@ -569,16 +562,11 @@ static bool rcu_preempt_need_deferred_qs(struct task_struct *t)
 static void rcu_preempt_deferred_qs(struct task_struct *t)
 {
 	unsigned long flags;
-	bool couldrecurse = rcu_preempt_depth() >= 0;
 
 	if (!rcu_preempt_need_deferred_qs(t))
 		return;
-	if (couldrecurse)
-		rcu_preempt_depth_set(rcu_preempt_depth() - RCU_NEST_BIAS);
 	local_irq_save(flags);
 	rcu_preempt_deferred_qs_irqrestore(t, flags);
-	if (couldrecurse)
-		rcu_preempt_depth_set(rcu_preempt_depth() + RCU_NEST_BIAS);
 }
 
 /*
@@ -615,19 +603,18 @@ static void rcu_read_unlock_special(struct task_struct *t)
 		struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
 		struct rcu_node *rnp = rdp->mynode;
 
-		exp = (t->rcu_blocked_node && t->rcu_blocked_node->exp_tasks) ||
-		      (rdp->grpmask & READ_ONCE(rnp->expmask)) ||
-		      tick_nohz_full_cpu(rdp->cpu);
+		exp = (t->rcu_blocked_node &&
+		       READ_ONCE(t->rcu_blocked_node->exp_tasks)) ||
+		      (rdp->grpmask & READ_ONCE(rnp->expmask));
 		// Need to defer quiescent state until everything is enabled.
-		if (irqs_were_disabled && use_softirq &&
-		    (in_interrupt() ||
-		     (exp && !t->rcu_read_unlock_special.b.deferred_qs))) {
-			// Using softirq, safe to awaken, and we get
-			// no help from enabling irqs, unlike bh/preempt.
+		if (use_softirq && (in_irq() || (exp && !irqs_were_disabled))) {
+			// Using softirq, safe to awaken, and either the
+			// wakeup is free or there is an expedited GP.
 			raise_softirq_irqoff(RCU_SOFTIRQ);
 		} else {
 			// Enabling BH or preempt does reschedule, so...
-			// Also if no expediting or NO_HZ_FULL, slow is OK.
+			// Also if no expediting, slow is OK.
+			// Plus nohz_full CPUs eventually get tick enabled.
 			set_tsk_need_resched(current);
 			set_preempt_need_resched();
 			if (IS_ENABLED(CONFIG_IRQ_WORK) && irqs_were_disabled &&
@@ -640,7 +627,6 @@ static void rcu_read_unlock_special(struct task_struct *t)
 				irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu);
 			}
 		}
-		t->rcu_read_unlock_special.b.deferred_qs = true;
 		local_irq_restore(flags);
 		return;
 	}
@@ -699,7 +685,7 @@ static void rcu_flavor_sched_clock_irq(int user)
 	} else if (rcu_preempt_need_deferred_qs(t)) {
 		rcu_preempt_deferred_qs(t); /* Report deferred QS. */
 		return;
-	} else if (!rcu_preempt_depth()) {
+	} else if (!WARN_ON_ONCE(rcu_preempt_depth())) {
 		rcu_qs(); /* Report immediate QS. */
 		return;
 	}
@@ -760,8 +746,8 @@ dump_blkd_tasks(struct rcu_node *rnp, int ncheck)
 		pr_info("%s: %d:%d ->qsmask %#lx ->qsmaskinit %#lx ->qsmaskinitnext %#lx\n",
 			__func__, rnp1->grplo, rnp1->grphi, rnp1->qsmask, rnp1->qsmaskinit, rnp1->qsmaskinitnext);
 	pr_info("%s: ->gp_tasks %p ->boost_tasks %p ->exp_tasks %p\n",
-		__func__, READ_ONCE(rnp->gp_tasks), rnp->boost_tasks,
-		rnp->exp_tasks);
+		__func__, READ_ONCE(rnp->gp_tasks), data_race(rnp->boost_tasks),
+		READ_ONCE(rnp->exp_tasks));
 	pr_info("%s: ->blkd_tasks", __func__);
 	i = 0;
 	list_for_each(lhp, &rnp->blkd_tasks) {
@@ -854,8 +840,7 @@ void rcu_note_context_switch(bool preempt)
 	this_cpu_write(rcu_data.rcu_urgent_qs, false);
 	if (unlikely(raw_cpu_read(rcu_data.rcu_need_heavy_qs)))
 		rcu_momentary_dyntick_idle();
-	if (!preempt)
-		rcu_tasks_qs(current);
+	rcu_tasks_qs(current, preempt);
 out:
 	trace_rcu_utilization(TPS("End context switch"));
 }
@@ -1036,7 +1021,8 @@ static int rcu_boost_kthread(void *arg)
 	for (;;) {
 		WRITE_ONCE(rnp->boost_kthread_status, RCU_KTHREAD_WAITING);
 		trace_rcu_utilization(TPS("End boost kthread@rcu_wait"));
-		rcu_wait(rnp->boost_tasks || rnp->exp_tasks);
+		rcu_wait(READ_ONCE(rnp->boost_tasks) ||
+			 READ_ONCE(rnp->exp_tasks));
 		trace_rcu_utilization(TPS("Start boost kthread@rcu_wait"));
 		WRITE_ONCE(rnp->boost_kthread_status, RCU_KTHREAD_RUNNING);
 		more2boost = rcu_boost(rnp);
@@ -1079,9 +1065,9 @@ static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
 	    (rnp->gp_tasks != NULL &&
 	     rnp->boost_tasks == NULL &&
 	     rnp->qsmask == 0 &&
-	     (ULONG_CMP_GE(jiffies, rnp->boost_time) || rcu_state.cbovld))) {
+	     (!time_after(rnp->boost_time, jiffies) || rcu_state.cbovld))) {
 		if (rnp->exp_tasks == NULL)
-			rnp->boost_tasks = rnp->gp_tasks;
+			WRITE_ONCE(rnp->boost_tasks, rnp->gp_tasks);
 		raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
 		rcu_wake_cond(rnp->boost_kthread_task,
 			      READ_ONCE(rnp->boost_kthread_status));
@@ -2536,7 +2522,7 @@ static bool rcu_nohz_full_cpu(void)
 #ifdef CONFIG_NO_HZ_FULL
 	if (tick_nohz_full_cpu(smp_processor_id()) &&
 	    (!rcu_gp_in_progress() ||
-	     ULONG_CMP_LT(jiffies, READ_ONCE(rcu_state.gp_start) + HZ)))
+	     time_before(jiffies, READ_ONCE(rcu_state.gp_start) + HZ)))
 		return true;
 #endif /* #ifdef CONFIG_NO_HZ_FULL */
 	return false;
@@ -2567,3 +2553,21 @@ static void rcu_dynticks_task_exit(void)
 	WRITE_ONCE(current->rcu_tasks_idle_cpu, -1);
 #endif /* #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */
 }
+
+/* Turn on heavyweight RCU tasks trace readers on idle/user entry. */
+static void rcu_dynticks_task_trace_enter(void)
+{
+#ifdef CONFIG_TASKS_RCU_TRACE
+	if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB))
+		current->trc_reader_special.b.need_mb = true;
+#endif /* #ifdef CONFIG_TASKS_RCU_TRACE */
+}
+
+/* Turn off heavyweight RCU tasks trace readers on idle/user exit. */
+static void rcu_dynticks_task_trace_exit(void)
+{
+#ifdef CONFIG_TASKS_RCU_TRACE
+	if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB))
+		current->trc_reader_special.b.need_mb = false;
+#endif /* #ifdef CONFIG_TASKS_RCU_TRACE */
+}
diff --git a/kernel/rcu/tree_stall.h b/kernel/rcu/tree_stall.h
index 119ed6afd20f..b899883a4247 100644
--- a/kernel/rcu/tree_stall.h
+++ b/kernel/rcu/tree_stall.h
@@ -15,10 +15,12 @@
 int sysctl_panic_on_rcu_stall __read_mostly;
 
 #ifdef CONFIG_PROVE_RCU
-#define RCU_STALL_DELAY_DELTA	       (5 * HZ)
+#define RCU_STALL_DELAY_DELTA		(5 * HZ)
 #else
-#define RCU_STALL_DELAY_DELTA	       0
+#define RCU_STALL_DELAY_DELTA		0
 #endif
+#define RCU_STALL_MIGHT_DIV		8
+#define RCU_STALL_MIGHT_MIN		(2 * HZ)
 
 /* Limit-check stall timeouts specified at boottime and runtime. */
 int rcu_jiffies_till_stall_check(void)
@@ -40,6 +42,36 @@ int rcu_jiffies_till_stall_check(void)
 }
 EXPORT_SYMBOL_GPL(rcu_jiffies_till_stall_check);
 
+/**
+ * rcu_gp_might_be_stalled - Is it likely that the grace period is stalled?
+ *
+ * Returns @true if the current grace period is sufficiently old that
+ * it is reasonable to assume that it might be stalled.  This can be
+ * useful when deciding whether to allocate memory to enable RCU-mediated
+ * freeing on the one hand or just invoking synchronize_rcu() on the other.
+ * The latter is preferable when the grace period is stalled.
+ *
+ * Note that sampling of the .gp_start and .gp_seq fields must be done
+ * carefully to avoid false positives at the beginnings and ends of
+ * grace periods.
+ */
+bool rcu_gp_might_be_stalled(void)
+{
+	unsigned long d = rcu_jiffies_till_stall_check() / RCU_STALL_MIGHT_DIV;
+	unsigned long j = jiffies;
+
+	if (d < RCU_STALL_MIGHT_MIN)
+		d = RCU_STALL_MIGHT_MIN;
+	smp_mb(); // jiffies before .gp_seq to avoid false positives.
+	if (!rcu_gp_in_progress())
+		return false;
+	// Long delays at this point avoids false positive, but a delay
+	// of ULONG_MAX/4 jiffies voids your no-false-positive warranty.
+	smp_mb(); // .gp_seq before second .gp_start
+	// And ditto here.
+	return !time_before(j, READ_ONCE(rcu_state.gp_start) + d);
+}
+
 /* Don't do RCU CPU stall warnings during long sysrq printouts. */
 void rcu_sysrq_start(void)
 {
@@ -104,8 +136,8 @@ static void record_gp_stall_check_time(void)
 
 	WRITE_ONCE(rcu_state.gp_start, j);
 	j1 = rcu_jiffies_till_stall_check();
-	/* Record ->gp_start before ->jiffies_stall. */
-	smp_store_release(&rcu_state.jiffies_stall, j + j1); /* ^^^ */
+	smp_mb(); // ->gp_start before ->jiffies_stall and caller's ->gp_seq.
+	WRITE_ONCE(rcu_state.jiffies_stall, j + j1);
 	rcu_state.jiffies_resched = j + j1 / 2;
 	rcu_state.n_force_qs_gpstart = READ_ONCE(rcu_state.n_force_qs);
 }
@@ -192,14 +224,40 @@ static void rcu_print_detail_task_stall_rnp(struct rcu_node *rnp)
 	raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
 }
 
+// Communicate task state back to the RCU CPU stall warning request.
+struct rcu_stall_chk_rdr {
+	int nesting;
+	union rcu_special rs;
+	bool on_blkd_list;
+};
+
+/*
+ * Report out the state of a not-running task that is stalling the
+ * current RCU grace period.
+ */
+static bool check_slow_task(struct task_struct *t, void *arg)
+{
+	struct rcu_node *rnp;
+	struct rcu_stall_chk_rdr *rscrp = arg;
+
+	if (task_curr(t))
+		return false; // It is running, so decline to inspect it.
+	rscrp->nesting = t->rcu_read_lock_nesting;
+	rscrp->rs = t->rcu_read_unlock_special;
+	rnp = t->rcu_blocked_node;
+	rscrp->on_blkd_list = !list_empty(&t->rcu_node_entry);
+	return true;
+}
+
 /*
  * Scan the current list of tasks blocked within RCU read-side critical
  * sections, printing out the tid of each.
  */
 static int rcu_print_task_stall(struct rcu_node *rnp)
 {
-	struct task_struct *t;
 	int ndetected = 0;
+	struct rcu_stall_chk_rdr rscr;
+	struct task_struct *t;
 
 	if (!rcu_preempt_blocked_readers_cgp(rnp))
 		return 0;
@@ -208,7 +266,15 @@ static int rcu_print_task_stall(struct rcu_node *rnp)
 	t = list_entry(rnp->gp_tasks->prev,
 		       struct task_struct, rcu_node_entry);
 	list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) {
-		pr_cont(" P%d", t->pid);
+		if (!try_invoke_on_locked_down_task(t, check_slow_task, &rscr))
+			pr_cont(" P%d", t->pid);
+		else
+			pr_cont(" P%d/%d:%c%c%c%c",
+				t->pid, rscr.nesting,
+				".b"[rscr.rs.b.blocked],
+				".q"[rscr.rs.b.need_qs],
+				".e"[rscr.rs.b.exp_hint],
+				".l"[rscr.on_blkd_list]);
 		ndetected++;
 	}
 	pr_cont("\n");
@@ -299,6 +365,16 @@ static const char *gp_state_getname(short gs)
 	return gp_state_names[gs];
 }
 
+/* Is the RCU grace-period kthread being starved of CPU time? */
+static bool rcu_is_gp_kthread_starving(unsigned long *jp)
+{
+	unsigned long j = jiffies - READ_ONCE(rcu_state.gp_activity);
+
+	if (jp)
+		*jp = j;
+	return j > 2 * HZ;
+}
+
 /*
  * Print out diagnostic information for the specified stalled CPU.
  *
@@ -313,6 +389,7 @@ static const char *gp_state_getname(short gs)
 static void print_cpu_stall_info(int cpu)
 {
 	unsigned long delta;
+	bool falsepositive;
 	char fast_no_hz[72];
 	struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu);
 	char *ticks_title;
@@ -333,7 +410,9 @@ static void print_cpu_stall_info(int cpu)
 	}
 	print_cpu_stall_fast_no_hz(fast_no_hz, cpu);
 	delta = rcu_seq_ctr(rdp->mynode->gp_seq - rdp->rcu_iw_gp_seq);
-	pr_err("\t%d-%c%c%c%c: (%lu %s) idle=%03x/%ld/%#lx softirq=%u/%u fqs=%ld %s\n",
+	falsepositive = rcu_is_gp_kthread_starving(NULL) &&
+			rcu_dynticks_in_eqs(rcu_dynticks_snap(rdp));
+	pr_err("\t%d-%c%c%c%c: (%lu %s) idle=%03x/%ld/%#lx softirq=%u/%u fqs=%ld %s%s\n",
 	       cpu,
 	       "O."[!!cpu_online(cpu)],
 	       "o."[!!(rdp->grpmask & rdp->mynode->qsmaskinit)],
@@ -345,8 +424,9 @@ static void print_cpu_stall_info(int cpu)
 	       rcu_dynticks_snap(rdp) & 0xfff,
 	       rdp->dynticks_nesting, rdp->dynticks_nmi_nesting,
 	       rdp->softirq_snap, kstat_softirqs_cpu(RCU_SOFTIRQ, cpu),
-	       READ_ONCE(rcu_state.n_force_qs) - rcu_state.n_force_qs_gpstart,
-	       fast_no_hz);
+	       data_race(rcu_state.n_force_qs) - rcu_state.n_force_qs_gpstart,
+	       fast_no_hz,
+	       falsepositive ? " (false positive?)" : "");
 }
 
 /* Complain about starvation of grace-period kthread.  */
@@ -355,15 +435,15 @@ static void rcu_check_gp_kthread_starvation(void)
 	struct task_struct *gpk = rcu_state.gp_kthread;
 	unsigned long j;
 
-	j = jiffies - READ_ONCE(rcu_state.gp_activity);
-	if (j > 2 * HZ) {
+	if (rcu_is_gp_kthread_starving(&j)) {
 		pr_err("%s kthread starved for %ld jiffies! g%ld f%#x %s(%d) ->state=%#lx ->cpu=%d\n",
 		       rcu_state.name, j,
 		       (long)rcu_seq_current(&rcu_state.gp_seq),
-		       READ_ONCE(rcu_state.gp_flags),
+		       data_race(rcu_state.gp_flags),
 		       gp_state_getname(rcu_state.gp_state), rcu_state.gp_state,
 		       gpk ? gpk->state : ~0, gpk ? task_cpu(gpk) : -1);
 		if (gpk) {
+			pr_err("\tUnless %s kthread gets sufficient CPU time, OOM is now expected behavior.\n", rcu_state.name);
 			pr_err("RCU grace-period kthread stack dump:\n");
 			sched_show_task(gpk);
 			wake_up_process(gpk);
@@ -371,7 +451,7 @@ static void rcu_check_gp_kthread_starvation(void)
 	}
 }
 
-static void print_other_cpu_stall(unsigned long gp_seq)
+static void print_other_cpu_stall(unsigned long gp_seq, unsigned long gps)
 {
 	int cpu;
 	unsigned long flags;
@@ -388,7 +468,7 @@ static void print_other_cpu_stall(unsigned long gp_seq)
 
 	/*
 	 * OK, time to rat on our buddy...
-	 * See Documentation/RCU/stallwarn.txt for info on how to debug
+	 * See Documentation/RCU/stallwarn.rst for info on how to debug
 	 * RCU CPU stall warnings.
 	 */
 	pr_err("INFO: %s detected stalls on CPUs/tasks:\n", rcu_state.name);
@@ -408,7 +488,7 @@ static void print_other_cpu_stall(unsigned long gp_seq)
 	for_each_possible_cpu(cpu)
 		totqlen += rcu_get_n_cbs_cpu(cpu);
 	pr_cont("\t(detected by %d, t=%ld jiffies, g=%ld, q=%lu)\n",
-	       smp_processor_id(), (long)(jiffies - rcu_state.gp_start),
+	       smp_processor_id(), (long)(jiffies - gps),
 	       (long)rcu_seq_current(&rcu_state.gp_seq), totqlen);
 	if (ndetected) {
 		rcu_dump_cpu_stacks();
@@ -421,13 +501,11 @@ static void print_other_cpu_stall(unsigned long gp_seq)
 			pr_err("INFO: Stall ended before state dump start\n");
 		} else {
 			j = jiffies;
-			gpa = READ_ONCE(rcu_state.gp_activity);
+			gpa = data_race(rcu_state.gp_activity);
 			pr_err("All QSes seen, last %s kthread activity %ld (%ld-%ld), jiffies_till_next_fqs=%ld, root ->qsmask %#lx\n",
 			       rcu_state.name, j - gpa, j, gpa,
-			       READ_ONCE(jiffies_till_next_fqs),
+			       data_race(jiffies_till_next_fqs),
 			       rcu_get_root()->qsmask);
-			/* In this case, the current CPU might be at fault. */
-			sched_show_task(current);
 		}
 	}
 	/* Rewrite if needed in case of slow consoles. */
@@ -442,7 +520,7 @@ static void print_other_cpu_stall(unsigned long gp_seq)
 	rcu_force_quiescent_state();  /* Kick them all. */
 }
 
-static void print_cpu_stall(void)
+static void print_cpu_stall(unsigned long gps)
 {
 	int cpu;
 	unsigned long flags;
@@ -457,7 +535,7 @@ static void print_cpu_stall(void)
 
 	/*
 	 * OK, time to rat on ourselves...
-	 * See Documentation/RCU/stallwarn.txt for info on how to debug
+	 * See Documentation/RCU/stallwarn.rst for info on how to debug
 	 * RCU CPU stall warnings.
 	 */
 	pr_err("INFO: %s self-detected stall on CPU\n", rcu_state.name);
@@ -467,7 +545,7 @@ static void print_cpu_stall(void)
 	for_each_possible_cpu(cpu)
 		totqlen += rcu_get_n_cbs_cpu(cpu);
 	pr_cont("\t(t=%lu jiffies g=%ld q=%lu)\n",
-		jiffies - rcu_state.gp_start,
+		jiffies - gps,
 		(long)rcu_seq_current(&rcu_state.gp_seq), totqlen);
 
 	rcu_check_gp_kthread_starvation();
@@ -546,7 +624,7 @@ static void check_cpu_stall(struct rcu_data *rdp)
 	    cmpxchg(&rcu_state.jiffies_stall, js, jn) == js) {
 
 		/* We haven't checked in, so go dump stack. */
-		print_cpu_stall();
+		print_cpu_stall(gps);
 		if (rcu_cpu_stall_ftrace_dump)
 			rcu_ftrace_dump(DUMP_ALL);
 
@@ -555,7 +633,7 @@ static void check_cpu_stall(struct rcu_data *rdp)
 		   cmpxchg(&rcu_state.jiffies_stall, js, jn) == js) {
 
 		/* They had a few time units to dump stack, so complain. */
-		print_other_cpu_stall(gs2);
+		print_other_cpu_stall(gs2, gps);
 		if (rcu_cpu_stall_ftrace_dump)
 			rcu_ftrace_dump(DUMP_ALL);
 	}
@@ -581,23 +659,23 @@ void show_rcu_gp_kthreads(void)
 	struct task_struct *t = READ_ONCE(rcu_state.gp_kthread);
 
 	j = jiffies;
-	ja = j - READ_ONCE(rcu_state.gp_activity);
-	jr = j - READ_ONCE(rcu_state.gp_req_activity);
-	jw = j - READ_ONCE(rcu_state.gp_wake_time);
+	ja = j - data_race(rcu_state.gp_activity);
+	jr = j - data_race(rcu_state.gp_req_activity);
+	jw = j - data_race(rcu_state.gp_wake_time);
 	pr_info("%s: wait state: %s(%d) ->state: %#lx delta ->gp_activity %lu ->gp_req_activity %lu ->gp_wake_time %lu ->gp_wake_seq %ld ->gp_seq %ld ->gp_seq_needed %ld ->gp_flags %#x\n",
 		rcu_state.name, gp_state_getname(rcu_state.gp_state),
 		rcu_state.gp_state, t ? t->state : 0x1ffffL,
-		ja, jr, jw, (long)READ_ONCE(rcu_state.gp_wake_seq),
-		(long)READ_ONCE(rcu_state.gp_seq),
-		(long)READ_ONCE(rcu_get_root()->gp_seq_needed),
-		READ_ONCE(rcu_state.gp_flags));
+		ja, jr, jw, (long)data_race(rcu_state.gp_wake_seq),
+		(long)data_race(rcu_state.gp_seq),
+		(long)data_race(rcu_get_root()->gp_seq_needed),
+		data_race(rcu_state.gp_flags));
 	rcu_for_each_node_breadth_first(rnp) {
 		if (ULONG_CMP_GE(READ_ONCE(rcu_state.gp_seq),
 				 READ_ONCE(rnp->gp_seq_needed)))
 			continue;
 		pr_info("\trcu_node %d:%d ->gp_seq %ld ->gp_seq_needed %ld\n",
-			rnp->grplo, rnp->grphi, (long)READ_ONCE(rnp->gp_seq),
-			(long)READ_ONCE(rnp->gp_seq_needed));
+			rnp->grplo, rnp->grphi, (long)data_race(rnp->gp_seq),
+			(long)data_race(rnp->gp_seq_needed));
 		if (!rcu_is_leaf_node(rnp))
 			continue;
 		for_each_leaf_node_possible_cpu(rnp, cpu) {
@@ -607,7 +685,7 @@ void show_rcu_gp_kthreads(void)
 					 READ_ONCE(rdp->gp_seq_needed)))
 				continue;
 			pr_info("\tcpu %d ->gp_seq_needed %ld\n",
-				cpu, (long)READ_ONCE(rdp->gp_seq_needed));
+				cpu, (long)data_race(rdp->gp_seq_needed));
 		}
 	}
 	for_each_possible_cpu(cpu) {
@@ -615,7 +693,7 @@ void show_rcu_gp_kthreads(void)
 		if (rcu_segcblist_is_offloaded(&rdp->cblist))
 			show_rcu_nocb_state(rdp);
 	}
-	/* sched_show_task(rcu_state.gp_kthread); */
+	show_rcu_tasks_gp_kthreads();
 }
 EXPORT_SYMBOL_GPL(show_rcu_gp_kthreads);
 
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
index 28a8bdc5072f..351c322e42df 100644
--- a/kernel/rcu/update.c
+++ b/kernel/rcu/update.c
@@ -41,6 +41,7 @@
 #include <linux/sched/isolation.h>
 #include <linux/kprobes.h>
 #include <linux/slab.h>
+#include <linux/irq_work.h>
 
 #define CREATE_TRACE_POINTS
 
@@ -51,6 +52,19 @@
 #endif
 #define MODULE_PARAM_PREFIX "rcupdate."
 
+#ifndef data_race
+#define data_race(expr)							\
+	({								\
+		expr;							\
+	})
+#endif
+#ifndef ASSERT_EXCLUSIVE_WRITER
+#define ASSERT_EXCLUSIVE_WRITER(var) do { } while (0)
+#endif
+#ifndef ASSERT_EXCLUSIVE_ACCESS
+#define ASSERT_EXCLUSIVE_ACCESS(var) do { } while (0)
+#endif
+
 #ifndef CONFIG_TINY_RCU
 module_param(rcu_expedited, int, 0);
 module_param(rcu_normal, int, 0);
@@ -63,12 +77,12 @@ module_param(rcu_normal_after_boot, int, 0);
  * rcu_read_lock_held_common() - might we be in RCU-sched read-side critical section?
  * @ret:	Best guess answer if lockdep cannot be relied on
  *
- * Returns true if lockdep must be ignored, in which case *ret contains
+ * Returns true if lockdep must be ignored, in which case ``*ret`` contains
  * the best guess described below.  Otherwise returns false, in which
- * case *ret tells the caller nothing and the caller should instead
+ * case ``*ret`` tells the caller nothing and the caller should instead
  * consult lockdep.
  *
- * If CONFIG_DEBUG_LOCK_ALLOC is selected, set *ret to nonzero iff in an
+ * If CONFIG_DEBUG_LOCK_ALLOC is selected, set ``*ret`` to nonzero iff in an
  * RCU-sched read-side critical section.  In absence of
  * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
  * critical section unless it can prove otherwise.  Note that disabling
@@ -82,7 +96,7 @@ module_param(rcu_normal_after_boot, int, 0);
  *
  * Note that if the CPU is in the idle loop from an RCU point of view (ie:
  * that we are in the section between rcu_idle_enter() and rcu_idle_exit())
- * then rcu_read_lock_held() sets *ret to false even if the CPU did an
+ * then rcu_read_lock_held() sets ``*ret`` to false even if the CPU did an
  * rcu_read_lock().  The reason for this is that RCU ignores CPUs that are
  * in such a section, considering these as in extended quiescent state,
  * so such a CPU is effectively never in an RCU read-side critical section
@@ -98,15 +112,15 @@ module_param(rcu_normal_after_boot, int, 0);
 static bool rcu_read_lock_held_common(bool *ret)
 {
 	if (!debug_lockdep_rcu_enabled()) {
-		*ret = 1;
+		*ret = true;
 		return true;
 	}
 	if (!rcu_is_watching()) {
-		*ret = 0;
+		*ret = false;
 		return true;
 	}
 	if (!rcu_lockdep_current_cpu_online()) {
-		*ret = 0;
+		*ret = false;
 		return true;
 	}
 	return false;
@@ -377,13 +391,14 @@ void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array,
 			might_sleep();
 			continue;
 		}
-		init_rcu_head_on_stack(&rs_array[i].head);
-		init_completion(&rs_array[i].completion);
 		for (j = 0; j < i; j++)
 			if (crcu_array[j] == crcu_array[i])
 				break;
-		if (j == i)
+		if (j == i) {
+			init_rcu_head_on_stack(&rs_array[i].head);
+			init_completion(&rs_array[i].completion);
 			(crcu_array[i])(&rs_array[i].head, wakeme_after_rcu);
+		}
 	}
 
 	/* Wait for all callbacks to be invoked. */
@@ -394,9 +409,10 @@ void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array,
 		for (j = 0; j < i; j++)
 			if (crcu_array[j] == crcu_array[i])
 				break;
-		if (j == i)
+		if (j == i) {
 			wait_for_completion(&rs_array[i].completion);
-		destroy_rcu_head_on_stack(&rs_array[i].head);
+			destroy_rcu_head_on_stack(&rs_array[i].head);
+		}
 	}
 }
 EXPORT_SYMBOL_GPL(__wait_rcu_gp);
@@ -501,370 +517,6 @@ int rcu_cpu_stall_suppress_at_boot __read_mostly; // !0 = suppress boot stalls.
 EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress_at_boot);
 module_param(rcu_cpu_stall_suppress_at_boot, int, 0444);
 
-#ifdef CONFIG_TASKS_RCU
-
-/*
- * Simple variant of RCU whose quiescent states are voluntary context
- * switch, cond_resched_rcu_qs(), user-space execution, and idle.
- * As such, grace periods can take one good long time.  There are no
- * read-side primitives similar to rcu_read_lock() and rcu_read_unlock()
- * because this implementation is intended to get the system into a safe
- * state for some of the manipulations involved in tracing and the like.
- * Finally, this implementation does not support high call_rcu_tasks()
- * rates from multiple CPUs.  If this is required, per-CPU callback lists
- * will be needed.
- */
-
-/* Global list of callbacks and associated lock. */
-static struct rcu_head *rcu_tasks_cbs_head;
-static struct rcu_head **rcu_tasks_cbs_tail = &rcu_tasks_cbs_head;
-static DECLARE_WAIT_QUEUE_HEAD(rcu_tasks_cbs_wq);
-static DEFINE_RAW_SPINLOCK(rcu_tasks_cbs_lock);
-
-/* Track exiting tasks in order to allow them to be waited for. */
-DEFINE_STATIC_SRCU(tasks_rcu_exit_srcu);
-
-/* Control stall timeouts.  Disable with <= 0, otherwise jiffies till stall. */
-#define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10)
-static int rcu_task_stall_timeout __read_mostly = RCU_TASK_STALL_TIMEOUT;
-module_param(rcu_task_stall_timeout, int, 0644);
-
-static struct task_struct *rcu_tasks_kthread_ptr;
-
-/**
- * call_rcu_tasks() - Queue an RCU for invocation task-based grace period
- * @rhp: structure to be used for queueing the RCU updates.
- * @func: actual callback function to be invoked after the grace period
- *
- * The callback function will be invoked some time after a full grace
- * period elapses, in other words after all currently executing RCU
- * read-side critical sections have completed. call_rcu_tasks() assumes
- * that the read-side critical sections end at a voluntary context
- * switch (not a preemption!), cond_resched_rcu_qs(), entry into idle,
- * or transition to usermode execution.  As such, there are no read-side
- * primitives analogous to rcu_read_lock() and rcu_read_unlock() because
- * this primitive is intended to determine that all tasks have passed
- * through a safe state, not so much for data-strcuture synchronization.
- *
- * See the description of call_rcu() for more detailed information on
- * memory ordering guarantees.
- */
-void call_rcu_tasks(struct rcu_head *rhp, rcu_callback_t func)
-{
-	unsigned long flags;
-	bool needwake;
-
-	rhp->next = NULL;
-	rhp->func = func;
-	raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags);
-	needwake = !rcu_tasks_cbs_head;
-	WRITE_ONCE(*rcu_tasks_cbs_tail, rhp);
-	rcu_tasks_cbs_tail = &rhp->next;
-	raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags);
-	/* We can't create the thread unless interrupts are enabled. */
-	if (needwake && READ_ONCE(rcu_tasks_kthread_ptr))
-		wake_up(&rcu_tasks_cbs_wq);
-}
-EXPORT_SYMBOL_GPL(call_rcu_tasks);
-
-/**
- * synchronize_rcu_tasks - wait until an rcu-tasks grace period has elapsed.
- *
- * Control will return to the caller some time after a full rcu-tasks
- * grace period has elapsed, in other words after all currently
- * executing rcu-tasks read-side critical sections have elapsed.  These
- * read-side critical sections are delimited by calls to schedule(),
- * cond_resched_tasks_rcu_qs(), idle execution, userspace execution, calls
- * to synchronize_rcu_tasks(), and (in theory, anyway) cond_resched().
- *
- * This is a very specialized primitive, intended only for a few uses in
- * tracing and other situations requiring manipulation of function
- * preambles and profiling hooks.  The synchronize_rcu_tasks() function
- * is not (yet) intended for heavy use from multiple CPUs.
- *
- * Note that this guarantee implies further memory-ordering guarantees.
- * On systems with more than one CPU, when synchronize_rcu_tasks() returns,
- * each CPU is guaranteed to have executed a full memory barrier since the
- * end of its last RCU-tasks read-side critical section whose beginning
- * preceded the call to synchronize_rcu_tasks().  In addition, each CPU
- * having an RCU-tasks read-side critical section that extends beyond
- * the return from synchronize_rcu_tasks() is guaranteed to have executed
- * a full memory barrier after the beginning of synchronize_rcu_tasks()
- * and before the beginning of that RCU-tasks read-side critical section.
- * Note that these guarantees include CPUs that are offline, idle, or
- * executing in user mode, as well as CPUs that are executing in the kernel.
- *
- * Furthermore, if CPU A invoked synchronize_rcu_tasks(), which returned
- * to its caller on CPU B, then both CPU A and CPU B are guaranteed
- * to have executed a full memory barrier during the execution of
- * synchronize_rcu_tasks() -- even if CPU A and CPU B are the same CPU
- * (but again only if the system has more than one CPU).
- */
-void synchronize_rcu_tasks(void)
-{
-	/* Complain if the scheduler has not started.  */
-	RCU_LOCKDEP_WARN(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE,
-			 "synchronize_rcu_tasks called too soon");
-
-	/* Wait for the grace period. */
-	wait_rcu_gp(call_rcu_tasks);
-}
-EXPORT_SYMBOL_GPL(synchronize_rcu_tasks);
-
-/**
- * rcu_barrier_tasks - Wait for in-flight call_rcu_tasks() callbacks.
- *
- * Although the current implementation is guaranteed to wait, it is not
- * obligated to, for example, if there are no pending callbacks.
- */
-void rcu_barrier_tasks(void)
-{
-	/* There is only one callback queue, so this is easy.  ;-) */
-	synchronize_rcu_tasks();
-}
-EXPORT_SYMBOL_GPL(rcu_barrier_tasks);
-
-/* See if tasks are still holding out, complain if so. */
-static void check_holdout_task(struct task_struct *t,
-			       bool needreport, bool *firstreport)
-{
-	int cpu;
-
-	if (!READ_ONCE(t->rcu_tasks_holdout) ||
-	    t->rcu_tasks_nvcsw != READ_ONCE(t->nvcsw) ||
-	    !READ_ONCE(t->on_rq) ||
-	    (IS_ENABLED(CONFIG_NO_HZ_FULL) &&
-	     !is_idle_task(t) && t->rcu_tasks_idle_cpu >= 0)) {
-		WRITE_ONCE(t->rcu_tasks_holdout, false);
-		list_del_init(&t->rcu_tasks_holdout_list);
-		put_task_struct(t);
-		return;
-	}
-	rcu_request_urgent_qs_task(t);
-	if (!needreport)
-		return;
-	if (*firstreport) {
-		pr_err("INFO: rcu_tasks detected stalls on tasks:\n");
-		*firstreport = false;
-	}
-	cpu = task_cpu(t);
-	pr_alert("%p: %c%c nvcsw: %lu/%lu holdout: %d idle_cpu: %d/%d\n",
-		 t, ".I"[is_idle_task(t)],
-		 "N."[cpu < 0 || !tick_nohz_full_cpu(cpu)],
-		 t->rcu_tasks_nvcsw, t->nvcsw, t->rcu_tasks_holdout,
-		 t->rcu_tasks_idle_cpu, cpu);
-	sched_show_task(t);
-}
-
-/* RCU-tasks kthread that detects grace periods and invokes callbacks. */
-static int __noreturn rcu_tasks_kthread(void *arg)
-{
-	unsigned long flags;
-	struct task_struct *g, *t;
-	unsigned long lastreport;
-	struct rcu_head *list;
-	struct rcu_head *next;
-	LIST_HEAD(rcu_tasks_holdouts);
-	int fract;
-
-	/* Run on housekeeping CPUs by default.  Sysadm can move if desired. */
-	housekeeping_affine(current, HK_FLAG_RCU);
-
-	/*
-	 * Each pass through the following loop makes one check for
-	 * newly arrived callbacks, and, if there are some, waits for
-	 * one RCU-tasks grace period and then invokes the callbacks.
-	 * This loop is terminated by the system going down.  ;-)
-	 */
-	for (;;) {
-
-		/* Pick up any new callbacks. */
-		raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags);
-		list = rcu_tasks_cbs_head;
-		rcu_tasks_cbs_head = NULL;
-		rcu_tasks_cbs_tail = &rcu_tasks_cbs_head;
-		raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags);
-
-		/* If there were none, wait a bit and start over. */
-		if (!list) {
-			wait_event_interruptible(rcu_tasks_cbs_wq,
-						 READ_ONCE(rcu_tasks_cbs_head));
-			if (!rcu_tasks_cbs_head) {
-				WARN_ON(signal_pending(current));
-				schedule_timeout_interruptible(HZ/10);
-			}
-			continue;
-		}
-
-		/*
-		 * Wait for all pre-existing t->on_rq and t->nvcsw
-		 * transitions to complete.  Invoking synchronize_rcu()
-		 * suffices because all these transitions occur with
-		 * interrupts disabled.  Without this synchronize_rcu(),
-		 * a read-side critical section that started before the
-		 * grace period might be incorrectly seen as having started
-		 * after the grace period.
-		 *
-		 * This synchronize_rcu() also dispenses with the
-		 * need for a memory barrier on the first store to
-		 * ->rcu_tasks_holdout, as it forces the store to happen
-		 * after the beginning of the grace period.
-		 */
-		synchronize_rcu();
-
-		/*
-		 * There were callbacks, so we need to wait for an
-		 * RCU-tasks grace period.  Start off by scanning
-		 * the task list for tasks that are not already
-		 * voluntarily blocked.  Mark these tasks and make
-		 * a list of them in rcu_tasks_holdouts.
-		 */
-		rcu_read_lock();
-		for_each_process_thread(g, t) {
-			if (t != current && READ_ONCE(t->on_rq) &&
-			    !is_idle_task(t)) {
-				get_task_struct(t);
-				t->rcu_tasks_nvcsw = READ_ONCE(t->nvcsw);
-				WRITE_ONCE(t->rcu_tasks_holdout, true);
-				list_add(&t->rcu_tasks_holdout_list,
-					 &rcu_tasks_holdouts);
-			}
-		}
-		rcu_read_unlock();
-
-		/*
-		 * Wait for tasks that are in the process of exiting.
-		 * This does only part of the job, ensuring that all
-		 * tasks that were previously exiting reach the point
-		 * where they have disabled preemption, allowing the
-		 * later synchronize_rcu() to finish the job.
-		 */
-		synchronize_srcu(&tasks_rcu_exit_srcu);
-
-		/*
-		 * Each pass through the following loop scans the list
-		 * of holdout tasks, removing any that are no longer
-		 * holdouts.  When the list is empty, we are done.
-		 */
-		lastreport = jiffies;
-
-		/* Start off with HZ/10 wait and slowly back off to 1 HZ wait*/
-		fract = 10;
-
-		for (;;) {
-			bool firstreport;
-			bool needreport;
-			int rtst;
-			struct task_struct *t1;
-
-			if (list_empty(&rcu_tasks_holdouts))
-				break;
-
-			/* Slowly back off waiting for holdouts */
-			schedule_timeout_interruptible(HZ/fract);
-
-			if (fract > 1)
-				fract--;
-
-			rtst = READ_ONCE(rcu_task_stall_timeout);
-			needreport = rtst > 0 &&
-				     time_after(jiffies, lastreport + rtst);
-			if (needreport)
-				lastreport = jiffies;
-			firstreport = true;
-			WARN_ON(signal_pending(current));
-			list_for_each_entry_safe(t, t1, &rcu_tasks_holdouts,
-						rcu_tasks_holdout_list) {
-				check_holdout_task(t, needreport, &firstreport);
-				cond_resched();
-			}
-		}
-
-		/*
-		 * Because ->on_rq and ->nvcsw are not guaranteed
-		 * to have a full memory barriers prior to them in the
-		 * schedule() path, memory reordering on other CPUs could
-		 * cause their RCU-tasks read-side critical sections to
-		 * extend past the end of the grace period.  However,
-		 * because these ->nvcsw updates are carried out with
-		 * interrupts disabled, we can use synchronize_rcu()
-		 * to force the needed ordering on all such CPUs.
-		 *
-		 * This synchronize_rcu() also confines all
-		 * ->rcu_tasks_holdout accesses to be within the grace
-		 * period, avoiding the need for memory barriers for
-		 * ->rcu_tasks_holdout accesses.
-		 *
-		 * In addition, this synchronize_rcu() waits for exiting
-		 * tasks to complete their final preempt_disable() region
-		 * of execution, cleaning up after the synchronize_srcu()
-		 * above.
-		 */
-		synchronize_rcu();
-
-		/* Invoke the callbacks. */
-		while (list) {
-			next = list->next;
-			local_bh_disable();
-			list->func(list);
-			local_bh_enable();
-			list = next;
-			cond_resched();
-		}
-		/* Paranoid sleep to keep this from entering a tight loop */
-		schedule_timeout_uninterruptible(HZ/10);
-	}
-}
-
-/* Spawn rcu_tasks_kthread() at core_initcall() time. */
-static int __init rcu_spawn_tasks_kthread(void)
-{
-	struct task_struct *t;
-
-	t = kthread_run(rcu_tasks_kthread, NULL, "rcu_tasks_kthread");
-	if (WARN_ONCE(IS_ERR(t), "%s: Could not start Tasks-RCU grace-period kthread, OOM is now expected behavior\n", __func__))
-		return 0;
-	smp_mb(); /* Ensure others see full kthread. */
-	WRITE_ONCE(rcu_tasks_kthread_ptr, t);
-	return 0;
-}
-core_initcall(rcu_spawn_tasks_kthread);
-
-/* Do the srcu_read_lock() for the above synchronize_srcu().  */
-void exit_tasks_rcu_start(void) __acquires(&tasks_rcu_exit_srcu)
-{
-	preempt_disable();
-	current->rcu_tasks_idx = __srcu_read_lock(&tasks_rcu_exit_srcu);
-	preempt_enable();
-}
-
-/* Do the srcu_read_unlock() for the above synchronize_srcu().  */
-void exit_tasks_rcu_finish(void) __releases(&tasks_rcu_exit_srcu)
-{
-	preempt_disable();
-	__srcu_read_unlock(&tasks_rcu_exit_srcu, current->rcu_tasks_idx);
-	preempt_enable();
-}
-
-#endif /* #ifdef CONFIG_TASKS_RCU */
-
-#ifndef CONFIG_TINY_RCU
-
-/*
- * Print any non-default Tasks RCU settings.
- */
-static void __init rcu_tasks_bootup_oddness(void)
-{
-#ifdef CONFIG_TASKS_RCU
-	if (rcu_task_stall_timeout != RCU_TASK_STALL_TIMEOUT)
-		pr_info("\tTasks-RCU CPU stall warnings timeout set to %d (rcu_task_stall_timeout).\n", rcu_task_stall_timeout);
-	else
-		pr_info("\tTasks RCU enabled.\n");
-#endif /* #ifdef CONFIG_TASKS_RCU */
-}
-
-#endif /* #ifndef CONFIG_TINY_RCU */
-
 #ifdef CONFIG_PROVE_RCU
 
 /*
@@ -935,6 +587,8 @@ late_initcall(rcu_verify_early_boot_tests);
 void rcu_early_boot_tests(void) {}
 #endif /* CONFIG_PROVE_RCU */
 
+#include "tasks.h"
+
 #ifndef CONFIG_TINY_RCU
 
 /*
diff --git a/kernel/relay.c b/kernel/relay.c
index ade14fb7ce2e..628f570ca678 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1,7 +1,7 @@
 /*
  * Public API and common code for kernel->userspace relay file support.
  *
- * See Documentation/filesystems/relay.txt for an overview.
+ * See Documentation/filesystems/relay.rst for an overview.
  *
  * Copyright (C) 2002-2005 - Tom Zanussi (zanussi@us.ibm.com), IBM Corp
  * Copyright (C) 1999-2005 - Karim Yaghmour (karim@opersys.com)
@@ -991,14 +991,14 @@ static void relay_file_read_consume(struct rchan_buf *buf,
 /*
  *	relay_file_read_avail - boolean, are there unconsumed bytes available?
  */
-static int relay_file_read_avail(struct rchan_buf *buf, size_t read_pos)
+static int relay_file_read_avail(struct rchan_buf *buf)
 {
 	size_t subbuf_size = buf->chan->subbuf_size;
 	size_t n_subbufs = buf->chan->n_subbufs;
 	size_t produced = buf->subbufs_produced;
 	size_t consumed = buf->subbufs_consumed;
 
-	relay_file_read_consume(buf, read_pos, 0);
+	relay_file_read_consume(buf, 0, 0);
 
 	consumed = buf->subbufs_consumed;
 
@@ -1059,23 +1059,20 @@ static size_t relay_file_read_subbuf_avail(size_t read_pos,
 
 /**
  *	relay_file_read_start_pos - find the first available byte to read
- *	@read_pos: file read position
  *	@buf: relay channel buffer
  *
- *	If the @read_pos is in the middle of padding, return the
+ *	If the read_pos is in the middle of padding, return the
  *	position of the first actually available byte, otherwise
  *	return the original value.
  */
-static size_t relay_file_read_start_pos(size_t read_pos,
-					struct rchan_buf *buf)
+static size_t relay_file_read_start_pos(struct rchan_buf *buf)
 {
 	size_t read_subbuf, padding, padding_start, padding_end;
 	size_t subbuf_size = buf->chan->subbuf_size;
 	size_t n_subbufs = buf->chan->n_subbufs;
 	size_t consumed = buf->subbufs_consumed % n_subbufs;
+	size_t read_pos = consumed * subbuf_size + buf->bytes_consumed;
 
-	if (!read_pos)
-		read_pos = consumed * subbuf_size + buf->bytes_consumed;
 	read_subbuf = read_pos / subbuf_size;
 	padding = buf->padding[read_subbuf];
 	padding_start = (read_subbuf + 1) * subbuf_size - padding;
@@ -1131,10 +1128,10 @@ static ssize_t relay_file_read(struct file *filp,
 	do {
 		void *from;
 
-		if (!relay_file_read_avail(buf, *ppos))
+		if (!relay_file_read_avail(buf))
 			break;
 
-		read_start = relay_file_read_start_pos(*ppos, buf);
+		read_start = relay_file_read_start_pos(buf);
 		avail = relay_file_read_subbuf_avail(read_start, buf);
 		if (!avail)
 			break;
diff --git a/kernel/sched/Makefile b/kernel/sched/Makefile
index 21fb5a5662b5..5fc9c9b70862 100644
--- a/kernel/sched/Makefile
+++ b/kernel/sched/Makefile
@@ -7,6 +7,12 @@ endif
 # that is not a function of syscall inputs. E.g. involuntary context switches.
 KCOV_INSTRUMENT := n
 
+# There are numerous data races here, however, most of them are due to plain accesses.
+# This would make it even harder for syzbot to find reproducers, because these
+# bugs trigger without specific input. Disable by default, but should re-enable
+# eventually.
+KCSAN_SANITIZE := n
+
 ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
 # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
 # needed for x86 only.  Why this used to be enabled for all architectures is beyond
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 9a2fbf98fd6f..e675d8167385 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1110,8 +1110,7 @@ static void uclamp_update_root_tg(void) { }
 #endif
 
 int sysctl_sched_uclamp_handler(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp,
-				loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	bool update_root_tg = false;
 	int old_min, old_max;
@@ -2561,6 +2560,8 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
 	 *
 	 * Pairs with the LOCK+smp_mb__after_spinlock() on rq->lock in
 	 * __schedule().  See the comment for smp_mb__after_spinlock().
+	 *
+	 * A similar smb_rmb() lives in try_invoke_on_locked_down_task().
 	 */
 	smp_rmb();
 	if (p->on_rq && ttwu_remote(p, wake_flags))
@@ -2634,6 +2635,52 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
 	return success;
 }
 
+/**
+ * try_invoke_on_locked_down_task - Invoke a function on task in fixed state
+ * @p: Process for which the function is to be invoked.
+ * @func: Function to invoke.
+ * @arg: Argument to function.
+ *
+ * If the specified task can be quickly locked into a definite state
+ * (either sleeping or on a given runqueue), arrange to keep it in that
+ * state while invoking @func(@arg).  This function can use ->on_rq and
+ * task_curr() to work out what the state is, if required.  Given that
+ * @func can be invoked with a runqueue lock held, it had better be quite
+ * lightweight.
+ *
+ * Returns:
+ *	@false if the task slipped out from under the locks.
+ *	@true if the task was locked onto a runqueue or is sleeping.
+ *		However, @func can override this by returning @false.
+ */
+bool try_invoke_on_locked_down_task(struct task_struct *p, bool (*func)(struct task_struct *t, void *arg), void *arg)
+{
+	bool ret = false;
+	struct rq_flags rf;
+	struct rq *rq;
+
+	lockdep_assert_irqs_enabled();
+	raw_spin_lock_irq(&p->pi_lock);
+	if (p->on_rq) {
+		rq = __task_rq_lock(p, &rf);
+		if (task_rq(p) == rq)
+			ret = func(p, arg);
+		rq_unlock(rq, &rf);
+	} else {
+		switch (p->state) {
+		case TASK_RUNNING:
+		case TASK_WAKING:
+			break;
+		default:
+			smp_rmb(); // See smp_rmb() comment in try_to_wake_up().
+			if (!p->on_rq)
+				ret = func(p, arg);
+		}
+	}
+	raw_spin_unlock_irq(&p->pi_lock);
+	return ret;
+}
+
 /**
  * wake_up_process - Wake up a specific process
  * @p: The process to be woken up.
@@ -2718,7 +2765,7 @@ void set_numabalancing_state(bool enabled)
 
 #ifdef CONFIG_PROC_SYSCTL
 int sysctl_numa_balancing(struct ctl_table *table, int write,
-			 void __user *buffer, size_t *lenp, loff_t *ppos)
+			  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table t;
 	int err;
@@ -2792,8 +2839,8 @@ static void __init init_schedstats(void)
 }
 
 #ifdef CONFIG_PROC_SYSCTL
-int sysctl_schedstats(struct ctl_table *table, int write,
-			 void __user *buffer, size_t *lenp, loff_t *ppos)
+int sysctl_schedstats(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table t;
 	int err;
@@ -3859,8 +3906,7 @@ static noinline void __schedule_bug(struct task_struct *prev)
 	if (IS_ENABLED(CONFIG_DEBUG_PREEMPT)
 	    && in_atomic_preempt_off()) {
 		pr_err("Preemption disabled at:");
-		print_ip_sym(preempt_disable_ip);
-		pr_cont("\n");
+		print_ip_sym(KERN_ERR, preempt_disable_ip);
 	}
 	if (panic_on_warn)
 		panic("scheduling while atomic\n");
@@ -5953,7 +5999,7 @@ void sched_show_task(struct task_struct *p)
 		(unsigned long)task_thread_info(p)->flags);
 
 	print_worker_info(KERN_INFO, p);
-	show_stack(p, NULL);
+	show_stack(p, NULL, KERN_INFO);
 	put_task_stack(p);
 }
 EXPORT_SYMBOL_GPL(sched_show_task);
@@ -6795,8 +6841,7 @@ void ___might_sleep(const char *file, int line, int preempt_offset)
 	if (IS_ENABLED(CONFIG_DEBUG_PREEMPT)
 	    && !preempt_count_equals(preempt_offset)) {
 		pr_err("Preemption disabled at:");
-		print_ip_sym(preempt_disable_ip);
-		pr_cont("\n");
+		print_ip_sym(KERN_ERR, preempt_disable_ip);
 	}
 	dump_stack();
 	add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 02f323b85b6d..74181df48a23 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -645,8 +645,7 @@ struct sched_entity *__pick_last_entity(struct cfs_rq *cfs_rq)
  */
 
 int sched_proc_update_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 	unsigned int factor = get_update_sysctl_factor();
@@ -1094,7 +1093,7 @@ struct numa_group {
 	 * more by CPU use than by memory faults.
 	 */
 	unsigned long *faults_cpu;
-	unsigned long faults[0];
+	unsigned long faults[];
 };
 
 /*
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index df11d88c9895..45da29de3ecc 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2714,9 +2714,8 @@ static void sched_rt_do_global(void)
 	def_rt_bandwidth.rt_period = ns_to_ktime(global_rt_period());
 }
 
-int sched_rt_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos)
+int sched_rt_handler(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	int old_period, old_runtime;
 	static DEFINE_MUTEX(mutex);
@@ -2754,9 +2753,8 @@ int sched_rt_handler(struct ctl_table *table, int write,
 	return ret;
 }
 
-int sched_rr_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos)
+int sched_rr_handler(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	int ret;
 	static DEFINE_MUTEX(mutex);
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index db3a57675ccf..f504f3ac3967 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1461,7 +1461,7 @@ struct sched_group {
 	 * by attaching extra space to the end of the structure,
 	 * depending on how many CPUs the kernel has booted up with)
 	 */
-	unsigned long		cpumask[0];
+	unsigned long		cpumask[];
 };
 
 static inline struct cpumask *sched_group_span(struct sched_group *sg)
diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
index 8344757bba6e..fa64b2ee9fe6 100644
--- a/kernel/sched/topology.c
+++ b/kernel/sched/topology.c
@@ -209,7 +209,7 @@ bool sched_energy_update;
 
 #ifdef CONFIG_PROC_SYSCTL
 int sched_energy_aware_handler(struct ctl_table *table, int write,
-			 void __user *buffer, size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret, state;
 
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index 55a6184f5990..d653d8426de9 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -1776,7 +1776,7 @@ static void audit_actions_logged(u32 actions_logged, u32 old_actions_logged,
 }
 
 static int seccomp_actions_logged_handler(struct ctl_table *ro_table, int write,
-					  void __user *buffer, size_t *lenp,
+					  void *buffer, size_t *lenp,
 					  loff_t *ppos)
 {
 	int ret;
diff --git a/kernel/smp.c b/kernel/smp.c
index 786092aabdcd..84303197caf9 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -620,7 +620,7 @@ void __init smp_init(void)
  * early_boot_irqs_disabled is set.  Use local_irq_save/restore() instead
  * of local_irq_disable/enable().
  */
-void on_each_cpu(void (*func) (void *info), void *info, int wait)
+void on_each_cpu(smp_call_func_t func, void *info, int wait)
 {
 	unsigned long flags;
 
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 3b69a560a7ac..16fca3a43633 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -280,6 +280,8 @@ COND_SYSCALL(mlockall);
 COND_SYSCALL(munlockall);
 COND_SYSCALL(mincore);
 COND_SYSCALL(madvise);
+COND_SYSCALL(process_madvise);
+COND_SYSCALL_COMPAT(process_madvise);
 COND_SYSCALL(remap_file_pages);
 COND_SYSCALL(mbind);
 COND_SYSCALL_COMPAT(mbind);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 8a176d8727a3..d01dab091cc1 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -68,6 +68,9 @@
 #include <linux/bpf.h>
 #include <linux/mount.h>
 #include <linux/userfaultfd_k.h>
+#include <linux/coredump.h>
+#include <linux/latencytop.h>
+#include <linux/pid.h>
 
 #include "../lib/kstrtox.h"
 
@@ -103,22 +106,6 @@
 
 #if defined(CONFIG_SYSCTL)
 
-/* External variables not in a header file. */
-extern int suid_dumpable;
-#ifdef CONFIG_COREDUMP
-extern int core_uses_pid;
-extern char core_pattern[];
-extern unsigned int core_pipe_limit;
-#endif
-extern int pid_max;
-extern int pid_max_min, pid_max_max;
-extern int percpu_pagelist_fraction;
-extern int latencytop_enabled;
-extern unsigned int sysctl_nr_open_min, sysctl_nr_open_max;
-#ifndef CONFIG_MMU
-extern int sysctl_nr_trim_pages;
-#endif
-
 /* Constants used for minimum and  maximum */
 #ifdef CONFIG_LOCKUP_DETECTOR
 static int sixty = 60;
@@ -160,24 +147,6 @@ static unsigned long hung_task_timeout_max = (LONG_MAX/HZ);
 #ifdef CONFIG_INOTIFY_USER
 #include <linux/inotify.h>
 #endif
-#ifdef CONFIG_SPARC
-#endif
-
-#ifdef CONFIG_PARISC
-extern int pwrsw_enabled;
-#endif
-
-#ifdef CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW
-extern int unaligned_enabled;
-#endif
-
-#ifdef CONFIG_IA64
-extern int unaligned_dump_stack;
-#endif
-
-#ifdef CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN
-extern int no_unaligned_warning;
-#endif
 
 #ifdef CONFIG_PROC_SYSCTL
 
@@ -207,87 +176,13 @@ enum sysctl_writes_mode {
 };
 
 static enum sysctl_writes_mode sysctl_writes_strict = SYSCTL_WRITES_STRICT;
-
-static int proc_do_cad_pid(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos);
-static int proc_taint(struct ctl_table *table, int write,
-			       void __user *buffer, size_t *lenp, loff_t *ppos);
-#ifdef CONFIG_COMPACTION
-static int proc_dointvec_minmax_warn_RT_change(struct ctl_table *table,
-					       int write, void __user *buffer,
-					       size_t *lenp, loff_t *ppos);
-#endif
-#endif
-
-#ifdef CONFIG_PRINTK
-static int proc_dointvec_minmax_sysadmin(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos);
-#endif
-
-static int proc_dointvec_minmax_coredump(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp, loff_t *ppos);
-#ifdef CONFIG_COREDUMP
-static int proc_dostring_coredump(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp, loff_t *ppos);
-#endif
-static int proc_dopipe_max_size(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp, loff_t *ppos);
-
-#ifdef CONFIG_MAGIC_SYSRQ
-static int sysrq_sysctl_handler(struct ctl_table *table, int write,
-			void __user *buffer, size_t *lenp, loff_t *ppos);
-#endif
-
-static struct ctl_table kern_table[];
-static struct ctl_table vm_table[];
-static struct ctl_table fs_table[];
-static struct ctl_table debug_table[];
-static struct ctl_table dev_table[];
-extern struct ctl_table random_table[];
-#ifdef CONFIG_EPOLL
-extern struct ctl_table epoll_table[];
-#endif
-
-#ifdef CONFIG_FW_LOADER_USER_HELPER
-extern struct ctl_table firmware_config_table[];
-#endif
+#endif /* CONFIG_PROC_SYSCTL */
 
 #if defined(HAVE_ARCH_PICK_MMAP_LAYOUT) || \
     defined(CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
 int sysctl_legacy_va_layout;
 #endif
 
-/* The default sysctl tables: */
-
-static struct ctl_table sysctl_base_table[] = {
-	{
-		.procname	= "kernel",
-		.mode		= 0555,
-		.child		= kern_table,
-	},
-	{
-		.procname	= "vm",
-		.mode		= 0555,
-		.child		= vm_table,
-	},
-	{
-		.procname	= "fs",
-		.mode		= 0555,
-		.child		= fs_table,
-	},
-	{
-		.procname	= "debug",
-		.mode		= 0555,
-		.child		= debug_table,
-	},
-	{
-		.procname	= "dev",
-		.mode		= 0555,
-		.child		= dev_table,
-	},
-	{ }
-};
-
 #ifdef CONFIG_SCHED_DEBUG
 static int min_sched_granularity_ns = 100000;		/* 100 usecs */
 static int max_sched_granularity_ns = NSEC_PER_SEC;	/* 1 second */
@@ -304,1685 +199,19 @@ static int min_extfrag_threshold;
 static int max_extfrag_threshold = 1000;
 #endif
 
-static struct ctl_table kern_table[] = {
-	{
-		.procname	= "sched_child_runs_first",
-		.data		= &sysctl_sched_child_runs_first,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#ifdef CONFIG_SCHED_DEBUG
-	{
-		.procname	= "sched_min_granularity_ns",
-		.data		= &sysctl_sched_min_granularity,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sched_proc_update_handler,
-		.extra1		= &min_sched_granularity_ns,
-		.extra2		= &max_sched_granularity_ns,
-	},
-	{
-		.procname	= "sched_latency_ns",
-		.data		= &sysctl_sched_latency,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sched_proc_update_handler,
-		.extra1		= &min_sched_granularity_ns,
-		.extra2		= &max_sched_granularity_ns,
-	},
-	{
-		.procname	= "sched_wakeup_granularity_ns",
-		.data		= &sysctl_sched_wakeup_granularity,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sched_proc_update_handler,
-		.extra1		= &min_wakeup_granularity_ns,
-		.extra2		= &max_wakeup_granularity_ns,
-	},
-#ifdef CONFIG_SMP
-	{
-		.procname	= "sched_tunable_scaling",
-		.data		= &sysctl_sched_tunable_scaling,
-		.maxlen		= sizeof(enum sched_tunable_scaling),
-		.mode		= 0644,
-		.proc_handler	= sched_proc_update_handler,
-		.extra1		= &min_sched_tunable_scaling,
-		.extra2		= &max_sched_tunable_scaling,
-	},
-	{
-		.procname	= "sched_migration_cost_ns",
-		.data		= &sysctl_sched_migration_cost,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "sched_nr_migrate",
-		.data		= &sysctl_sched_nr_migrate,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#ifdef CONFIG_SCHEDSTATS
-	{
-		.procname	= "sched_schedstats",
-		.data		= NULL,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sysctl_schedstats,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif /* CONFIG_SCHEDSTATS */
-#endif /* CONFIG_SMP */
-#ifdef CONFIG_NUMA_BALANCING
-	{
-		.procname	= "numa_balancing_scan_delay_ms",
-		.data		= &sysctl_numa_balancing_scan_delay,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "numa_balancing_scan_period_min_ms",
-		.data		= &sysctl_numa_balancing_scan_period_min,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "numa_balancing_scan_period_max_ms",
-		.data		= &sysctl_numa_balancing_scan_period_max,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "numa_balancing_scan_size_mb",
-		.data		= &sysctl_numa_balancing_scan_size,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "numa_balancing",
-		.data		= NULL, /* filled in by handler */
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sysctl_numa_balancing,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif /* CONFIG_NUMA_BALANCING */
-#endif /* CONFIG_SCHED_DEBUG */
-	{
-		.procname	= "sched_rt_period_us",
-		.data		= &sysctl_sched_rt_period,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sched_rt_handler,
-	},
-	{
-		.procname	= "sched_rt_runtime_us",
-		.data		= &sysctl_sched_rt_runtime,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= sched_rt_handler,
-	},
-	{
-		.procname	= "sched_rr_timeslice_ms",
-		.data		= &sysctl_sched_rr_timeslice,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= sched_rr_handler,
-	},
-#ifdef CONFIG_UCLAMP_TASK
-	{
-		.procname	= "sched_util_clamp_min",
-		.data		= &sysctl_sched_uclamp_util_min,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sysctl_sched_uclamp_handler,
-	},
-	{
-		.procname	= "sched_util_clamp_max",
-		.data		= &sysctl_sched_uclamp_util_max,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sysctl_sched_uclamp_handler,
-	},
-#endif
-#ifdef CONFIG_SCHED_AUTOGROUP
-	{
-		.procname	= "sched_autogroup_enabled",
-		.data		= &sysctl_sched_autogroup_enabled,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-#ifdef CONFIG_CFS_BANDWIDTH
-	{
-		.procname	= "sched_cfs_bandwidth_slice_us",
-		.data		= &sysctl_sched_cfs_bandwidth_slice,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ONE,
-	},
-#endif
-#if defined(CONFIG_ENERGY_MODEL) && defined(CONFIG_CPU_FREQ_GOV_SCHEDUTIL)
-	{
-		.procname	= "sched_energy_aware",
-		.data		= &sysctl_sched_energy_aware,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sched_energy_aware_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-#ifdef CONFIG_PROVE_LOCKING
-	{
-		.procname	= "prove_locking",
-		.data		= &prove_locking,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_LOCK_STAT
-	{
-		.procname	= "lock_stat",
-		.data		= &lock_stat,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-	{
-		.procname	= "panic",
-		.data		= &panic_timeout,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#ifdef CONFIG_COREDUMP
-	{
-		.procname	= "core_uses_pid",
-		.data		= &core_uses_pid,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "core_pattern",
-		.data		= core_pattern,
-		.maxlen		= CORENAME_MAX_SIZE,
-		.mode		= 0644,
-		.proc_handler	= proc_dostring_coredump,
-	},
-	{
-		.procname	= "core_pipe_limit",
-		.data		= &core_pipe_limit,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_PROC_SYSCTL
-	{
-		.procname	= "tainted",
-		.maxlen 	= sizeof(long),
-		.mode		= 0644,
-		.proc_handler	= proc_taint,
-	},
-	{
-		.procname	= "sysctl_writes_strict",
-		.data		= &sysctl_writes_strict,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &neg_one,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-#ifdef CONFIG_LATENCYTOP
-	{
-		.procname	= "latencytop",
-		.data		= &latencytop_enabled,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= sysctl_latencytop,
-	},
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	{
-		.procname	= "real-root-dev",
-		.data		= &real_root_dev,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-	{
-		.procname	= "print-fatal-signals",
-		.data		= &print_fatal_signals,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#ifdef CONFIG_SPARC
-	{
-		.procname	= "reboot-cmd",
-		.data		= reboot_command,
-		.maxlen		= 256,
-		.mode		= 0644,
-		.proc_handler	= proc_dostring,
-	},
-	{
-		.procname	= "stop-a",
-		.data		= &stop_a_enabled,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "scons-poweroff",
-		.data		= &scons_pwroff,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_SPARC64
-	{
-		.procname	= "tsb-ratio",
-		.data		= &sysctl_tsb_ratio,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_PARISC
-	{
-		.procname	= "soft-power",
-		.data		= &pwrsw_enabled,
-		.maxlen		= sizeof (int),
-	 	.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW
-	{
-		.procname	= "unaligned-trap",
-		.data		= &unaligned_enabled,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-	{
-		.procname	= "ctrl-alt-del",
-		.data		= &C_A_D,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#ifdef CONFIG_FUNCTION_TRACER
-	{
-		.procname	= "ftrace_enabled",
-		.data		= &ftrace_enabled,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= ftrace_enable_sysctl,
-	},
-#endif
-#ifdef CONFIG_STACK_TRACER
-	{
-		.procname	= "stack_tracer_enabled",
-		.data		= &stack_tracer_enabled,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= stack_trace_sysctl,
-	},
-#endif
-#ifdef CONFIG_TRACING
-	{
-		.procname	= "ftrace_dump_on_oops",
-		.data		= &ftrace_dump_on_oops,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "traceoff_on_warning",
-		.data		= &__disable_trace_on_warning,
-		.maxlen		= sizeof(__disable_trace_on_warning),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "tracepoint_printk",
-		.data		= &tracepoint_printk,
-		.maxlen		= sizeof(tracepoint_printk),
-		.mode		= 0644,
-		.proc_handler	= tracepoint_printk_sysctl,
-	},
-#endif
-#ifdef CONFIG_KEXEC_CORE
-	{
-		.procname	= "kexec_load_disabled",
-		.data		= &kexec_load_disabled,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		/* only handle a transition from default "0" to "1" */
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ONE,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-#ifdef CONFIG_MODULES
-	{
-		.procname	= "modprobe",
-		.data		= &modprobe_path,
-		.maxlen		= KMOD_PATH_LEN,
-		.mode		= 0644,
-		.proc_handler	= proc_dostring,
-	},
-	{
-		.procname	= "modules_disabled",
-		.data		= &modules_disabled,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		/* only handle a transition from default "0" to "1" */
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ONE,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-#ifdef CONFIG_UEVENT_HELPER
-	{
-		.procname	= "hotplug",
-		.data		= &uevent_helper,
-		.maxlen		= UEVENT_HELPER_PATH_LEN,
-		.mode		= 0644,
-		.proc_handler	= proc_dostring,
-	},
-#endif
-#ifdef CONFIG_CHR_DEV_SG
-	{
-		.procname	= "sg-big-buff",
-		.data		= &sg_big_buff,
-		.maxlen		= sizeof (int),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_BSD_PROCESS_ACCT
-	{
-		.procname	= "acct",
-		.data		= &acct_parm,
-		.maxlen		= 3*sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_MAGIC_SYSRQ
-	{
-		.procname	= "sysrq",
-		.data		= NULL,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= sysrq_sysctl_handler,
-	},
-#endif
-#ifdef CONFIG_PROC_SYSCTL
-	{
-		.procname	= "cad_pid",
-		.data		= NULL,
-		.maxlen		= sizeof (int),
-		.mode		= 0600,
-		.proc_handler	= proc_do_cad_pid,
-	},
-#endif
-	{
-		.procname	= "threads-max",
-		.data		= NULL,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= sysctl_max_threads,
-	},
-	{
-		.procname	= "random",
-		.mode		= 0555,
-		.child		= random_table,
-	},
-	{
-		.procname	= "usermodehelper",
-		.mode		= 0555,
-		.child		= usermodehelper_table,
-	},
-#ifdef CONFIG_FW_LOADER_USER_HELPER
-	{
-		.procname	= "firmware_config",
-		.mode		= 0555,
-		.child		= firmware_config_table,
-	},
-#endif
-	{
-		.procname	= "overflowuid",
-		.data		= &overflowuid,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &minolduid,
-		.extra2		= &maxolduid,
-	},
-	{
-		.procname	= "overflowgid",
-		.data		= &overflowgid,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &minolduid,
-		.extra2		= &maxolduid,
-	},
-#ifdef CONFIG_S390
-	{
-		.procname	= "userprocess_debug",
-		.data		= &show_unhandled_signals,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-	{
-		.procname	= "pid_max",
-		.data		= &pid_max,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &pid_max_min,
-		.extra2		= &pid_max_max,
-	},
-	{
-		.procname	= "panic_on_oops",
-		.data		= &panic_on_oops,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "panic_print",
-		.data		= &panic_print,
-		.maxlen		= sizeof(unsigned long),
-		.mode		= 0644,
-		.proc_handler	= proc_doulongvec_minmax,
-	},
-#if defined CONFIG_PRINTK
-	{
-		.procname	= "printk",
-		.data		= &console_loglevel,
-		.maxlen		= 4*sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "printk_ratelimit",
-		.data		= &printk_ratelimit_state.interval,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_jiffies,
-	},
-	{
-		.procname	= "printk_ratelimit_burst",
-		.data		= &printk_ratelimit_state.burst,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "printk_delay",
-		.data		= &printk_delay_msec,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &ten_thousand,
-	},
-	{
-		.procname	= "printk_devkmsg",
-		.data		= devkmsg_log_str,
-		.maxlen		= DEVKMSG_STR_MAX_SIZE,
-		.mode		= 0644,
-		.proc_handler	= devkmsg_sysctl_set_loglvl,
-	},
-	{
-		.procname	= "dmesg_restrict",
-		.data		= &dmesg_restrict,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax_sysadmin,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "kptr_restrict",
-		.data		= &kptr_restrict,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax_sysadmin,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &two,
-	},
-#endif
-	{
-		.procname	= "ngroups_max",
-		.data		= &ngroups_max,
-		.maxlen		= sizeof (int),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "cap_last_cap",
-		.data		= (void *)&cap_last_cap,
-		.maxlen		= sizeof(int),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	},
-#if defined(CONFIG_LOCKUP_DETECTOR)
-	{
-		.procname       = "watchdog",
-		.data		= &watchdog_user_enabled,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler   = proc_watchdog,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "watchdog_thresh",
-		.data		= &watchdog_thresh,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_watchdog_thresh,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &sixty,
-	},
-	{
-		.procname       = "nmi_watchdog",
-		.data		= &nmi_watchdog_user_enabled,
-		.maxlen		= sizeof(int),
-		.mode		= NMI_WATCHDOG_SYSCTL_PERM,
-		.proc_handler   = proc_nmi_watchdog,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "watchdog_cpumask",
-		.data		= &watchdog_cpumask_bits,
-		.maxlen		= NR_CPUS,
-		.mode		= 0644,
-		.proc_handler	= proc_watchdog_cpumask,
-	},
-#ifdef CONFIG_SOFTLOCKUP_DETECTOR
-	{
-		.procname       = "soft_watchdog",
-		.data		= &soft_watchdog_user_enabled,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler   = proc_soft_watchdog,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "softlockup_panic",
-		.data		= &softlockup_panic,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#ifdef CONFIG_SMP
-	{
-		.procname	= "softlockup_all_cpu_backtrace",
-		.data		= &sysctl_softlockup_all_cpu_backtrace,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif /* CONFIG_SMP */
-#endif
-#ifdef CONFIG_HARDLOCKUP_DETECTOR
-	{
-		.procname	= "hardlockup_panic",
-		.data		= &hardlockup_panic,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#ifdef CONFIG_SMP
-	{
-		.procname	= "hardlockup_all_cpu_backtrace",
-		.data		= &sysctl_hardlockup_all_cpu_backtrace,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif /* CONFIG_SMP */
-#endif
-#endif
-
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
-	{
-		.procname       = "unknown_nmi_panic",
-		.data           = &unknown_nmi_panic,
-		.maxlen         = sizeof (int),
-		.mode           = 0644,
-		.proc_handler   = proc_dointvec,
-	},
-#endif
-#if defined(CONFIG_X86)
-	{
-		.procname	= "panic_on_unrecovered_nmi",
-		.data		= &panic_on_unrecovered_nmi,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "panic_on_io_nmi",
-		.data		= &panic_on_io_nmi,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
-	{
-		.procname	= "panic_on_stackoverflow",
-		.data		= &sysctl_panic_on_stackoverflow,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-	{
-		.procname	= "bootloader_type",
-		.data		= &bootloader_type,
-		.maxlen		= sizeof (int),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "bootloader_version",
-		.data		= &bootloader_version,
-		.maxlen		= sizeof (int),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "io_delay_type",
-		.data		= &io_delay_type,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#if defined(CONFIG_MMU)
-	{
-		.procname	= "randomize_va_space",
-		.data		= &randomize_va_space,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#if defined(CONFIG_S390) && defined(CONFIG_SMP)
-	{
-		.procname	= "spin_retry",
-		.data		= &spin_retry,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#if	defined(CONFIG_ACPI_SLEEP) && defined(CONFIG_X86)
-	{
-		.procname	= "acpi_video_flags",
-		.data		= &acpi_realmode_flags,
-		.maxlen		= sizeof (unsigned long),
-		.mode		= 0644,
-		.proc_handler	= proc_doulongvec_minmax,
-	},
-#endif
-#ifdef CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN
-	{
-		.procname	= "ignore-unaligned-usertrap",
-		.data		= &no_unaligned_warning,
-		.maxlen		= sizeof (int),
-	 	.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_IA64
-	{
-		.procname	= "unaligned-dump-stack",
-		.data		= &unaligned_dump_stack,
-		.maxlen		= sizeof (int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_DETECT_HUNG_TASK
-	{
-		.procname	= "hung_task_panic",
-		.data		= &sysctl_hung_task_panic,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "hung_task_check_count",
-		.data		= &sysctl_hung_task_check_count,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-	},
-	{
-		.procname	= "hung_task_timeout_secs",
-		.data		= &sysctl_hung_task_timeout_secs,
-		.maxlen		= sizeof(unsigned long),
-		.mode		= 0644,
-		.proc_handler	= proc_dohung_task_timeout_secs,
-		.extra2		= &hung_task_timeout_max,
-	},
-	{
-		.procname	= "hung_task_check_interval_secs",
-		.data		= &sysctl_hung_task_check_interval_secs,
-		.maxlen		= sizeof(unsigned long),
-		.mode		= 0644,
-		.proc_handler	= proc_dohung_task_timeout_secs,
-		.extra2		= &hung_task_timeout_max,
-	},
-	{
-		.procname	= "hung_task_warnings",
-		.data		= &sysctl_hung_task_warnings,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &neg_one,
-	},
-#endif
-#ifdef CONFIG_RT_MUTEXES
-	{
-		.procname	= "max_lock_depth",
-		.data		= &max_lock_depth,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-	{
-		.procname	= "poweroff_cmd",
-		.data		= &poweroff_cmd,
-		.maxlen		= POWEROFF_CMD_PATH_LEN,
-		.mode		= 0644,
-		.proc_handler	= proc_dostring,
-	},
-#ifdef CONFIG_KEYS
-	{
-		.procname	= "keys",
-		.mode		= 0555,
-		.child		= key_sysctls,
-	},
-#endif
-#ifdef CONFIG_PERF_EVENTS
-	/*
-	 * User-space scripts rely on the existence of this file
-	 * as a feature check for perf_events being enabled.
-	 *
-	 * So it's an ABI, do not remove!
-	 */
-	{
-		.procname	= "perf_event_paranoid",
-		.data		= &sysctl_perf_event_paranoid,
-		.maxlen		= sizeof(sysctl_perf_event_paranoid),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "perf_event_mlock_kb",
-		.data		= &sysctl_perf_event_mlock,
-		.maxlen		= sizeof(sysctl_perf_event_mlock),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "perf_event_max_sample_rate",
-		.data		= &sysctl_perf_event_sample_rate,
-		.maxlen		= sizeof(sysctl_perf_event_sample_rate),
-		.mode		= 0644,
-		.proc_handler	= perf_proc_update_handler,
-		.extra1		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "perf_cpu_time_max_percent",
-		.data		= &sysctl_perf_cpu_time_max_percent,
-		.maxlen		= sizeof(sysctl_perf_cpu_time_max_percent),
-		.mode		= 0644,
-		.proc_handler	= perf_cpu_time_max_percent_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &one_hundred,
-	},
-	{
-		.procname	= "perf_event_max_stack",
-		.data		= &sysctl_perf_event_max_stack,
-		.maxlen		= sizeof(sysctl_perf_event_max_stack),
-		.mode		= 0644,
-		.proc_handler	= perf_event_max_stack_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &six_hundred_forty_kb,
-	},
-	{
-		.procname	= "perf_event_max_contexts_per_stack",
-		.data		= &sysctl_perf_event_max_contexts_per_stack,
-		.maxlen		= sizeof(sysctl_perf_event_max_contexts_per_stack),
-		.mode		= 0644,
-		.proc_handler	= perf_event_max_stack_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &one_thousand,
-	},
-#endif
-	{
-		.procname	= "panic_on_warn",
-		.data		= &panic_on_warn,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
-	{
-		.procname	= "timer_migration",
-		.data		= &sysctl_timer_migration,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= timer_migration_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-#ifdef CONFIG_BPF_SYSCALL
-	{
-		.procname	= "unprivileged_bpf_disabled",
-		.data		= &sysctl_unprivileged_bpf_disabled,
-		.maxlen		= sizeof(sysctl_unprivileged_bpf_disabled),
-		.mode		= 0644,
-		/* only handle a transition from default "0" to "1" */
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ONE,
-		.extra2		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "bpf_stats_enabled",
-		.data		= &bpf_stats_enabled_key.key,
-		.maxlen		= sizeof(bpf_stats_enabled_key),
-		.mode		= 0644,
-		.proc_handler	= proc_do_static_key,
-	},
-#endif
-#if defined(CONFIG_TREE_RCU)
-	{
-		.procname	= "panic_on_rcu_stall",
-		.data		= &sysctl_panic_on_rcu_stall,
-		.maxlen		= sizeof(sysctl_panic_on_rcu_stall),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-#ifdef CONFIG_STACKLEAK_RUNTIME_DISABLE
-	{
-		.procname	= "stack_erasing",
-		.data		= NULL,
-		.maxlen		= sizeof(int),
-		.mode		= 0600,
-		.proc_handler	= stack_erasing_sysctl,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-	{ }
-};
-
-static struct ctl_table vm_table[] = {
-	{
-		.procname	= "overcommit_memory",
-		.data		= &sysctl_overcommit_memory,
-		.maxlen		= sizeof(sysctl_overcommit_memory),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &two,
-	},
-	{
-		.procname	= "panic_on_oom",
-		.data		= &sysctl_panic_on_oom,
-		.maxlen		= sizeof(sysctl_panic_on_oom),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &two,
-	},
-	{
-		.procname	= "oom_kill_allocating_task",
-		.data		= &sysctl_oom_kill_allocating_task,
-		.maxlen		= sizeof(sysctl_oom_kill_allocating_task),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "oom_dump_tasks",
-		.data		= &sysctl_oom_dump_tasks,
-		.maxlen		= sizeof(sysctl_oom_dump_tasks),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "overcommit_ratio",
-		.data		= &sysctl_overcommit_ratio,
-		.maxlen		= sizeof(sysctl_overcommit_ratio),
-		.mode		= 0644,
-		.proc_handler	= overcommit_ratio_handler,
-	},
-	{
-		.procname	= "overcommit_kbytes",
-		.data		= &sysctl_overcommit_kbytes,
-		.maxlen		= sizeof(sysctl_overcommit_kbytes),
-		.mode		= 0644,
-		.proc_handler	= overcommit_kbytes_handler,
-	},
-	{
-		.procname	= "page-cluster", 
-		.data		= &page_cluster,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-	},
-	{
-		.procname	= "dirty_background_ratio",
-		.data		= &dirty_background_ratio,
-		.maxlen		= sizeof(dirty_background_ratio),
-		.mode		= 0644,
-		.proc_handler	= dirty_background_ratio_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &one_hundred,
-	},
-	{
-		.procname	= "dirty_background_bytes",
-		.data		= &dirty_background_bytes,
-		.maxlen		= sizeof(dirty_background_bytes),
-		.mode		= 0644,
-		.proc_handler	= dirty_background_bytes_handler,
-		.extra1		= &one_ul,
-	},
-	{
-		.procname	= "dirty_ratio",
-		.data		= &vm_dirty_ratio,
-		.maxlen		= sizeof(vm_dirty_ratio),
-		.mode		= 0644,
-		.proc_handler	= dirty_ratio_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &one_hundred,
-	},
-	{
-		.procname	= "dirty_bytes",
-		.data		= &vm_dirty_bytes,
-		.maxlen		= sizeof(vm_dirty_bytes),
-		.mode		= 0644,
-		.proc_handler	= dirty_bytes_handler,
-		.extra1		= &dirty_bytes_min,
-	},
-	{
-		.procname	= "dirty_writeback_centisecs",
-		.data		= &dirty_writeback_interval,
-		.maxlen		= sizeof(dirty_writeback_interval),
-		.mode		= 0644,
-		.proc_handler	= dirty_writeback_centisecs_handler,
-	},
-	{
-		.procname	= "dirty_expire_centisecs",
-		.data		= &dirty_expire_interval,
-		.maxlen		= sizeof(dirty_expire_interval),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-	},
-	{
-		.procname	= "dirtytime_expire_seconds",
-		.data		= &dirtytime_expire_interval,
-		.maxlen		= sizeof(dirtytime_expire_interval),
-		.mode		= 0644,
-		.proc_handler	= dirtytime_interval_handler,
-		.extra1		= SYSCTL_ZERO,
-	},
-	{
-		.procname	= "swappiness",
-		.data		= &vm_swappiness,
-		.maxlen		= sizeof(vm_swappiness),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &one_hundred,
-	},
-#ifdef CONFIG_HUGETLB_PAGE
-	{
-		.procname	= "nr_hugepages",
-		.data		= NULL,
-		.maxlen		= sizeof(unsigned long),
-		.mode		= 0644,
-		.proc_handler	= hugetlb_sysctl_handler,
-	},
-#ifdef CONFIG_NUMA
-	{
-		.procname       = "nr_hugepages_mempolicy",
-		.data           = NULL,
-		.maxlen         = sizeof(unsigned long),
-		.mode           = 0644,
-		.proc_handler   = &hugetlb_mempolicy_sysctl_handler,
-	},
-	{
-		.procname		= "numa_stat",
-		.data			= &sysctl_vm_numa_stat,
-		.maxlen			= sizeof(int),
-		.mode			= 0644,
-		.proc_handler	= sysctl_vm_numa_stat_handler,
-		.extra1			= SYSCTL_ZERO,
-		.extra2			= SYSCTL_ONE,
-	},
-#endif
-	 {
-		.procname	= "hugetlb_shm_group",
-		.data		= &sysctl_hugetlb_shm_group,
-		.maxlen		= sizeof(gid_t),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	 },
-	{
-		.procname	= "nr_overcommit_hugepages",
-		.data		= NULL,
-		.maxlen		= sizeof(unsigned long),
-		.mode		= 0644,
-		.proc_handler	= hugetlb_overcommit_handler,
-	},
-#endif
-	{
-		.procname	= "lowmem_reserve_ratio",
-		.data		= &sysctl_lowmem_reserve_ratio,
-		.maxlen		= sizeof(sysctl_lowmem_reserve_ratio),
-		.mode		= 0644,
-		.proc_handler	= lowmem_reserve_ratio_sysctl_handler,
-	},
-	{
-		.procname	= "drop_caches",
-		.data		= &sysctl_drop_caches,
-		.maxlen		= sizeof(int),
-		.mode		= 0200,
-		.proc_handler	= drop_caches_sysctl_handler,
-		.extra1		= SYSCTL_ONE,
-		.extra2		= &four,
-	},
-#ifdef CONFIG_COMPACTION
-	{
-		.procname	= "compact_memory",
-		.data		= &sysctl_compact_memory,
-		.maxlen		= sizeof(int),
-		.mode		= 0200,
-		.proc_handler	= sysctl_compaction_handler,
-	},
-	{
-		.procname	= "extfrag_threshold",
-		.data		= &sysctl_extfrag_threshold,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &min_extfrag_threshold,
-		.extra2		= &max_extfrag_threshold,
-	},
-	{
-		.procname	= "compact_unevictable_allowed",
-		.data		= &sysctl_compact_unevictable_allowed,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax_warn_RT_change,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-
-#endif /* CONFIG_COMPACTION */
-	{
-		.procname	= "min_free_kbytes",
-		.data		= &min_free_kbytes,
-		.maxlen		= sizeof(min_free_kbytes),
-		.mode		= 0644,
-		.proc_handler	= min_free_kbytes_sysctl_handler,
-		.extra1		= SYSCTL_ZERO,
-	},
-	{
-		.procname	= "watermark_boost_factor",
-		.data		= &watermark_boost_factor,
-		.maxlen		= sizeof(watermark_boost_factor),
-		.mode		= 0644,
-		.proc_handler	= watermark_boost_factor_sysctl_handler,
-		.extra1		= SYSCTL_ZERO,
-	},
-	{
-		.procname	= "watermark_scale_factor",
-		.data		= &watermark_scale_factor,
-		.maxlen		= sizeof(watermark_scale_factor),
-		.mode		= 0644,
-		.proc_handler	= watermark_scale_factor_sysctl_handler,
-		.extra1		= SYSCTL_ONE,
-		.extra2		= &one_thousand,
-	},
-	{
-		.procname	= "percpu_pagelist_fraction",
-		.data		= &percpu_pagelist_fraction,
-		.maxlen		= sizeof(percpu_pagelist_fraction),
-		.mode		= 0644,
-		.proc_handler	= percpu_pagelist_fraction_sysctl_handler,
-		.extra1		= SYSCTL_ZERO,
-	},
-#ifdef CONFIG_MMU
-	{
-		.procname	= "max_map_count",
-		.data		= &sysctl_max_map_count,
-		.maxlen		= sizeof(sysctl_max_map_count),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-	},
-#else
-	{
-		.procname	= "nr_trim_pages",
-		.data		= &sysctl_nr_trim_pages,
-		.maxlen		= sizeof(sysctl_nr_trim_pages),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-	},
-#endif
-	{
-		.procname	= "laptop_mode",
-		.data		= &laptop_mode,
-		.maxlen		= sizeof(laptop_mode),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_jiffies,
-	},
-	{
-		.procname	= "block_dump",
-		.data		= &block_dump,
-		.maxlen		= sizeof(block_dump),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-		.extra1		= SYSCTL_ZERO,
-	},
-	{
-		.procname	= "vfs_cache_pressure",
-		.data		= &sysctl_vfs_cache_pressure,
-		.maxlen		= sizeof(sysctl_vfs_cache_pressure),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-		.extra1		= SYSCTL_ZERO,
-	},
-#if defined(HAVE_ARCH_PICK_MMAP_LAYOUT) || \
-    defined(CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
-	{
-		.procname	= "legacy_va_layout",
-		.data		= &sysctl_legacy_va_layout,
-		.maxlen		= sizeof(sysctl_legacy_va_layout),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-		.extra1		= SYSCTL_ZERO,
-	},
-#endif
-#ifdef CONFIG_NUMA
-	{
-		.procname	= "zone_reclaim_mode",
-		.data		= &node_reclaim_mode,
-		.maxlen		= sizeof(node_reclaim_mode),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-		.extra1		= SYSCTL_ZERO,
-	},
-	{
-		.procname	= "min_unmapped_ratio",
-		.data		= &sysctl_min_unmapped_ratio,
-		.maxlen		= sizeof(sysctl_min_unmapped_ratio),
-		.mode		= 0644,
-		.proc_handler	= sysctl_min_unmapped_ratio_sysctl_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &one_hundred,
-	},
-	{
-		.procname	= "min_slab_ratio",
-		.data		= &sysctl_min_slab_ratio,
-		.maxlen		= sizeof(sysctl_min_slab_ratio),
-		.mode		= 0644,
-		.proc_handler	= sysctl_min_slab_ratio_sysctl_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &one_hundred,
-	},
-#endif
-#ifdef CONFIG_SMP
-	{
-		.procname	= "stat_interval",
-		.data		= &sysctl_stat_interval,
-		.maxlen		= sizeof(sysctl_stat_interval),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_jiffies,
-	},
-	{
-		.procname	= "stat_refresh",
-		.data		= NULL,
-		.maxlen		= 0,
-		.mode		= 0600,
-		.proc_handler	= vmstat_refresh,
-	},
-#endif
-#ifdef CONFIG_MMU
-	{
-		.procname	= "mmap_min_addr",
-		.data		= &dac_mmap_min_addr,
-		.maxlen		= sizeof(unsigned long),
-		.mode		= 0644,
-		.proc_handler	= mmap_min_addr_handler,
-	},
-#endif
-#ifdef CONFIG_NUMA
-	{
-		.procname	= "numa_zonelist_order",
-		.data		= &numa_zonelist_order,
-		.maxlen		= NUMA_ZONELIST_ORDER_LEN,
-		.mode		= 0644,
-		.proc_handler	= numa_zonelist_order_handler,
-	},
-#endif
-#if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
-   (defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
-	{
-		.procname	= "vdso_enabled",
-#ifdef CONFIG_X86_32
-		.data		= &vdso32_enabled,
-		.maxlen		= sizeof(vdso32_enabled),
-#else
-		.data		= &vdso_enabled,
-		.maxlen		= sizeof(vdso_enabled),
-#endif
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-		.extra1		= SYSCTL_ZERO,
-	},
-#endif
-#ifdef CONFIG_HIGHMEM
-	{
-		.procname	= "highmem_is_dirtyable",
-		.data		= &vm_highmem_is_dirtyable,
-		.maxlen		= sizeof(vm_highmem_is_dirtyable),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-#ifdef CONFIG_MEMORY_FAILURE
-	{
-		.procname	= "memory_failure_early_kill",
-		.data		= &sysctl_memory_failure_early_kill,
-		.maxlen		= sizeof(sysctl_memory_failure_early_kill),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "memory_failure_recovery",
-		.data		= &sysctl_memory_failure_recovery,
-		.maxlen		= sizeof(sysctl_memory_failure_recovery),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-	{
-		.procname	= "user_reserve_kbytes",
-		.data		= &sysctl_user_reserve_kbytes,
-		.maxlen		= sizeof(sysctl_user_reserve_kbytes),
-		.mode		= 0644,
-		.proc_handler	= proc_doulongvec_minmax,
-	},
-	{
-		.procname	= "admin_reserve_kbytes",
-		.data		= &sysctl_admin_reserve_kbytes,
-		.maxlen		= sizeof(sysctl_admin_reserve_kbytes),
-		.mode		= 0644,
-		.proc_handler	= proc_doulongvec_minmax,
-	},
-#ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS
-	{
-		.procname	= "mmap_rnd_bits",
-		.data		= &mmap_rnd_bits,
-		.maxlen		= sizeof(mmap_rnd_bits),
-		.mode		= 0600,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= (void *)&mmap_rnd_bits_min,
-		.extra2		= (void *)&mmap_rnd_bits_max,
-	},
-#endif
-#ifdef CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS
-	{
-		.procname	= "mmap_rnd_compat_bits",
-		.data		= &mmap_rnd_compat_bits,
-		.maxlen		= sizeof(mmap_rnd_compat_bits),
-		.mode		= 0600,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= (void *)&mmap_rnd_compat_bits_min,
-		.extra2		= (void *)&mmap_rnd_compat_bits_max,
-	},
-#endif
-#ifdef CONFIG_USERFAULTFD
-	{
-		.procname	= "unprivileged_userfaultfd",
-		.data		= &sysctl_unprivileged_userfaultfd,
-		.maxlen		= sizeof(sysctl_unprivileged_userfaultfd),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-	{ }
-};
-
-static struct ctl_table fs_table[] = {
-	{
-		.procname	= "inode-nr",
-		.data		= &inodes_stat,
-		.maxlen		= 2*sizeof(long),
-		.mode		= 0444,
-		.proc_handler	= proc_nr_inodes,
-	},
-	{
-		.procname	= "inode-state",
-		.data		= &inodes_stat,
-		.maxlen		= 7*sizeof(long),
-		.mode		= 0444,
-		.proc_handler	= proc_nr_inodes,
-	},
-	{
-		.procname	= "file-nr",
-		.data		= &files_stat,
-		.maxlen		= sizeof(files_stat),
-		.mode		= 0444,
-		.proc_handler	= proc_nr_files,
-	},
-	{
-		.procname	= "file-max",
-		.data		= &files_stat.max_files,
-		.maxlen		= sizeof(files_stat.max_files),
-		.mode		= 0644,
-		.proc_handler	= proc_doulongvec_minmax,
-		.extra1		= &zero_ul,
-		.extra2		= &long_max,
-	},
-	{
-		.procname	= "nr_open",
-		.data		= &sysctl_nr_open,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &sysctl_nr_open_min,
-		.extra2		= &sysctl_nr_open_max,
-	},
-	{
-		.procname	= "dentry-state",
-		.data		= &dentry_stat,
-		.maxlen		= 6*sizeof(long),
-		.mode		= 0444,
-		.proc_handler	= proc_nr_dentry,
-	},
-	{
-		.procname	= "overflowuid",
-		.data		= &fs_overflowuid,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &minolduid,
-		.extra2		= &maxolduid,
-	},
-	{
-		.procname	= "overflowgid",
-		.data		= &fs_overflowgid,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &minolduid,
-		.extra2		= &maxolduid,
-	},
-#ifdef CONFIG_FILE_LOCKING
-	{
-		.procname	= "leases-enable",
-		.data		= &leases_enable,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_DNOTIFY
-	{
-		.procname	= "dir-notify-enable",
-		.data		= &dir_notify_enable,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_MMU
-#ifdef CONFIG_FILE_LOCKING
-	{
-		.procname	= "lease-break-time",
-		.data		= &lease_break_time,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#endif
-#ifdef CONFIG_AIO
-	{
-		.procname	= "aio-nr",
-		.data		= &aio_nr,
-		.maxlen		= sizeof(aio_nr),
-		.mode		= 0444,
-		.proc_handler	= proc_doulongvec_minmax,
-	},
-	{
-		.procname	= "aio-max-nr",
-		.data		= &aio_max_nr,
-		.maxlen		= sizeof(aio_max_nr),
-		.mode		= 0644,
-		.proc_handler	= proc_doulongvec_minmax,
-	},
-#endif /* CONFIG_AIO */
-#ifdef CONFIG_INOTIFY_USER
-	{
-		.procname	= "inotify",
-		.mode		= 0555,
-		.child		= inotify_table,
-	},
-#endif	
-#ifdef CONFIG_EPOLL
-	{
-		.procname	= "epoll",
-		.mode		= 0555,
-		.child		= epoll_table,
-	},
-#endif
-#endif
-	{
-		.procname	= "protected_symlinks",
-		.data		= &sysctl_protected_symlinks,
-		.maxlen		= sizeof(int),
-		.mode		= 0600,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "protected_hardlinks",
-		.data		= &sysctl_protected_hardlinks,
-		.maxlen		= sizeof(int),
-		.mode		= 0600,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-	{
-		.procname	= "protected_fifos",
-		.data		= &sysctl_protected_fifos,
-		.maxlen		= sizeof(int),
-		.mode		= 0600,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &two,
-	},
-	{
-		.procname	= "protected_regular",
-		.data		= &sysctl_protected_regular,
-		.maxlen		= sizeof(int),
-		.mode		= 0600,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &two,
-	},
-	{
-		.procname	= "suid_dumpable",
-		.data		= &suid_dumpable,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax_coredump,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= &two,
-	},
-#if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
-	{
-		.procname	= "binfmt_misc",
-		.mode		= 0555,
-		.child		= sysctl_mount_point,
-	},
-#endif
-	{
-		.procname	= "pipe-max-size",
-		.data		= &pipe_max_size,
-		.maxlen		= sizeof(pipe_max_size),
-		.mode		= 0644,
-		.proc_handler	= proc_dopipe_max_size,
-	},
-	{
-		.procname	= "pipe-user-pages-hard",
-		.data		= &pipe_user_pages_hard,
-		.maxlen		= sizeof(pipe_user_pages_hard),
-		.mode		= 0644,
-		.proc_handler	= proc_doulongvec_minmax,
-	},
-	{
-		.procname	= "pipe-user-pages-soft",
-		.data		= &pipe_user_pages_soft,
-		.maxlen		= sizeof(pipe_user_pages_soft),
-		.mode		= 0644,
-		.proc_handler	= proc_doulongvec_minmax,
-	},
-	{
-		.procname	= "mount-max",
-		.data		= &sysctl_mount_max,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= SYSCTL_ONE,
-	},
-	{ }
-};
-
-static struct ctl_table debug_table[] = {
-#ifdef CONFIG_SYSCTL_EXCEPTION_TRACE
-	{
-		.procname	= "exception-trace",
-		.data		= &show_unhandled_signals,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec
-	},
-#endif
-#if defined(CONFIG_OPTPROBES)
-	{
-		.procname	= "kprobes-optimization",
-		.data		= &sysctl_kprobes_optimization,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_kprobes_optimization_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-#endif
-	{ }
-};
-
-static struct ctl_table dev_table[] = {
-	{ }
-};
-
-int __init sysctl_init(void)
-{
-	struct ctl_table_header *hdr;
-
-	hdr = register_sysctl_table(sysctl_base_table);
-	kmemleak_not_leak(hdr);
-	return 0;
-}
-
-#endif /* CONFIG_SYSCTL */
-
-/*
- * /proc/sys support
- */
-
+#endif /* CONFIG_SYSCTL */
+
+/*
+ * /proc/sys support
+ */
+
 #ifdef CONFIG_PROC_SYSCTL
 
 static int _proc_do_string(char *data, int maxlen, int write,
-			   char __user *buffer,
-			   size_t *lenp, loff_t *ppos)
+		char *buffer, size_t *lenp, loff_t *ppos)
 {
 	size_t len;
-	char __user *p;
-	char c;
+	char c, *p;
 
 	if (!data || !maxlen || !*lenp) {
 		*lenp = 0;
@@ -2007,8 +236,7 @@ static int _proc_do_string(char *data, int maxlen, int write,
 		*ppos += *lenp;
 		p = buffer;
 		while ((p - buffer) < *lenp && len < maxlen - 1) {
-			if (get_user(c, p++))
-				return -EFAULT;
+			c = *(p++);
 			if (c == 0 || c == '\n')
 				break;
 			data[len++] = c;
@@ -2030,11 +258,9 @@ static int _proc_do_string(char *data, int maxlen, int write,
 		if (len > *lenp)
 			len = *lenp;
 		if (len)
-			if (copy_to_user(buffer, data, len))
-				return -EFAULT;
+			memcpy(buffer, data, len);
 		if (len < *lenp) {
-			if (put_user('\n', buffer + len))
-				return -EFAULT;
+			buffer[len] = '\n';
 			len++;
 		}
 		*lenp = len;
@@ -2095,13 +321,13 @@ static bool proc_first_pos_non_zero_ignore(loff_t *ppos,
  * Returns 0 on success.
  */
 int proc_dostring(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos)
+		  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (write)
 		proc_first_pos_non_zero_ignore(ppos, table);
 
-	return _proc_do_string((char *)(table->data), table->maxlen, write,
-			       (char __user *)buffer, lenp, ppos);
+	return _proc_do_string(table->data, table->maxlen, write, buffer, lenp,
+			ppos);
 }
 
 static size_t proc_skip_spaces(char **buf)
@@ -2232,11 +458,10 @@ static int proc_get_long(char **buf, size_t *size,
  * @val: the integer to be converted
  * @neg: sign of the number, %TRUE for negative
  *
- * In case of success %0 is returned and @buf and @size are updated with
- * the amount of bytes written.
+ * In case of success @buf and @size are updated with the amount of bytes
+ * written.
  */
-static int proc_put_long(void __user **buf, size_t *size, unsigned long val,
-			  bool neg)
+static void proc_put_long(void **buf, size_t *size, unsigned long val, bool neg)
 {
 	int len;
 	char tmp[TMPBUFLEN], *p = tmp;
@@ -2245,24 +470,22 @@ static int proc_put_long(void __user **buf, size_t *size, unsigned long val,
 	len = strlen(tmp);
 	if (len > *size)
 		len = *size;
-	if (copy_to_user(*buf, tmp, len))
-		return -EFAULT;
+	memcpy(*buf, tmp, len);
 	*size -= len;
 	*buf += len;
-	return 0;
 }
 #undef TMPBUFLEN
 
-static int proc_put_char(void __user **buf, size_t *size, char c)
+static void proc_put_char(void **buf, size_t *size, char c)
 {
 	if (*size) {
-		char __user **buffer = (char __user **)buf;
-		if (put_user(c, *buffer))
-			return -EFAULT;
-		(*size)--, (*buffer)++;
+		char **buffer = (char **)buf;
+		**buffer = c;
+
+		(*size)--;
+		(*buffer)++;
 		*buf = *buffer;
 	}
-	return 0;
 }
 
 static int do_proc_dointvec_conv(bool *negp, unsigned long *lvalp,
@@ -2310,7 +533,7 @@ static int do_proc_douintvec_conv(unsigned long *lvalp,
 static const char proc_wspace_sep[] = { ' ', '\t', '\n' };
 
 static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
-		  int write, void __user *buffer,
+		  int write, void *buffer,
 		  size_t *lenp, loff_t *ppos,
 		  int (*conv)(bool *negp, unsigned long *lvalp, int *valp,
 			      int write, void *data),
@@ -2318,7 +541,7 @@ static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
 {
 	int *i, vleft, first = 1, err = 0;
 	size_t left;
-	char *kbuf = NULL, *p;
+	char *p;
 	
 	if (!tbl_data || !table->maxlen || !*lenp || (*ppos && !write)) {
 		*lenp = 0;
@@ -2338,9 +561,7 @@ static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
 
 		if (left > PAGE_SIZE - 1)
 			left = PAGE_SIZE - 1;
-		p = kbuf = memdup_user_nul(buffer, left);
-		if (IS_ERR(kbuf))
-			return PTR_ERR(kbuf);
+		p = buffer;
 	}
 
 	for (; left && vleft--; i++, first=0) {
@@ -2367,24 +588,17 @@ static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
 				break;
 			}
 			if (!first)
-				err = proc_put_char(&buffer, &left, '\t');
-			if (err)
-				break;
-			err = proc_put_long(&buffer, &left, lval, neg);
-			if (err)
-				break;
+				proc_put_char(&buffer, &left, '\t');
+			proc_put_long(&buffer, &left, lval, neg);
 		}
 	}
 
 	if (!write && !first && left && !err)
-		err = proc_put_char(&buffer, &left, '\n');
+		proc_put_char(&buffer, &left, '\n');
 	if (write && !err && left)
 		left -= proc_skip_spaces(&p);
-	if (write) {
-		kfree(kbuf);
-		if (first)
-			return err ? : -EINVAL;
-	}
+	if (write && first)
+		return err ? : -EINVAL;
 	*lenp -= left;
 out:
 	*ppos += *lenp;
@@ -2392,7 +606,7 @@ static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
 }
 
 static int do_proc_dointvec(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos,
+		  void *buffer, size_t *lenp, loff_t *ppos,
 		  int (*conv)(bool *negp, unsigned long *lvalp, int *valp,
 			      int write, void *data),
 		  void *data)
@@ -2403,7 +617,7 @@ static int do_proc_dointvec(struct ctl_table *table, int write,
 
 static int do_proc_douintvec_w(unsigned int *tbl_data,
 			       struct ctl_table *table,
-			       void __user *buffer,
+			       void *buffer,
 			       size_t *lenp, loff_t *ppos,
 			       int (*conv)(unsigned long *lvalp,
 					   unsigned int *valp,
@@ -2414,7 +628,7 @@ static int do_proc_douintvec_w(unsigned int *tbl_data,
 	int err = 0;
 	size_t left;
 	bool neg;
-	char *kbuf = NULL, *p;
+	char *p = buffer;
 
 	left = *lenp;
 
@@ -2424,10 +638,6 @@ static int do_proc_douintvec_w(unsigned int *tbl_data,
 	if (left > PAGE_SIZE - 1)
 		left = PAGE_SIZE - 1;
 
-	p = kbuf = memdup_user_nul(buffer, left);
-	if (IS_ERR(kbuf))
-		return -EINVAL;
-
 	left -= proc_skip_spaces(&p);
 	if (!left) {
 		err = -EINVAL;
@@ -2451,7 +661,6 @@ static int do_proc_douintvec_w(unsigned int *tbl_data,
 		left -= proc_skip_spaces(&p);
 
 out_free:
-	kfree(kbuf);
 	if (err)
 		return -EINVAL;
 
@@ -2463,7 +672,7 @@ static int do_proc_douintvec_w(unsigned int *tbl_data,
 	return err;
 }
 
-static int do_proc_douintvec_r(unsigned int *tbl_data, void __user *buffer,
+static int do_proc_douintvec_r(unsigned int *tbl_data, void *buffer,
 			       size_t *lenp, loff_t *ppos,
 			       int (*conv)(unsigned long *lvalp,
 					   unsigned int *valp,
@@ -2481,11 +690,11 @@ static int do_proc_douintvec_r(unsigned int *tbl_data, void __user *buffer,
 		goto out;
 	}
 
-	err = proc_put_long(&buffer, &left, lval, false);
-	if (err || !left)
+	proc_put_long(&buffer, &left, lval, false);
+	if (!left)
 		goto out;
 
-	err = proc_put_char(&buffer, &left, '\n');
+	proc_put_char(&buffer, &left, '\n');
 
 out:
 	*lenp -= left;
@@ -2495,7 +704,7 @@ static int do_proc_douintvec_r(unsigned int *tbl_data, void __user *buffer,
 }
 
 static int __do_proc_douintvec(void *tbl_data, struct ctl_table *table,
-			       int write, void __user *buffer,
+			       int write, void *buffer,
 			       size_t *lenp, loff_t *ppos,
 			       int (*conv)(unsigned long *lvalp,
 					   unsigned int *valp,
@@ -2531,7 +740,7 @@ static int __do_proc_douintvec(void *tbl_data, struct ctl_table *table,
 }
 
 static int do_proc_douintvec(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp, loff_t *ppos,
+			     void *buffer, size_t *lenp, loff_t *ppos,
 			     int (*conv)(unsigned long *lvalp,
 					 unsigned int *valp,
 					 int write, void *data),
@@ -2554,16 +763,15 @@ static int do_proc_douintvec(struct ctl_table *table, int write,
  *
  * Returns 0 on success.
  */
-int proc_dointvec(struct ctl_table *table, int write,
-		     void __user *buffer, size_t *lenp, loff_t *ppos)
+int proc_dointvec(struct ctl_table *table, int write, void *buffer,
+		  size_t *lenp, loff_t *ppos)
 {
 	return do_proc_dointvec(table, write, buffer, lenp, ppos, NULL, NULL);
 }
 
 #ifdef CONFIG_COMPACTION
 static int proc_dointvec_minmax_warn_RT_change(struct ctl_table *table,
-					       int write, void __user *buffer,
-					       size_t *lenp, loff_t *ppos)
+		int write, void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret, old;
 
@@ -2595,8 +803,8 @@ static int proc_dointvec_minmax_warn_RT_change(struct ctl_table *table,
  *
  * Returns 0 on success.
  */
-int proc_douintvec(struct ctl_table *table, int write,
-		     void __user *buffer, size_t *lenp, loff_t *ppos)
+int proc_douintvec(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	return do_proc_douintvec(table, write, buffer, lenp, ppos,
 				 do_proc_douintvec_conv, NULL);
@@ -2607,7 +815,7 @@ int proc_douintvec(struct ctl_table *table, int write,
  * This means we can safely use a temporary.
  */
 static int proc_taint(struct ctl_table *table, int write,
-			       void __user *buffer, size_t *lenp, loff_t *ppos)
+			       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table t;
 	unsigned long tmptaint = get_taint();
@@ -2639,7 +847,7 @@ static int proc_taint(struct ctl_table *table, int write,
 
 #ifdef CONFIG_PRINTK
 static int proc_dointvec_minmax_sysadmin(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (write && !capable(CAP_SYS_ADMIN))
 		return -EPERM;
@@ -2705,7 +913,7 @@ static int do_proc_dointvec_minmax_conv(bool *negp, unsigned long *lvalp,
  * Returns 0 on success or -EINVAL on write when the range check fails.
  */
 int proc_dointvec_minmax(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos)
+		  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct do_proc_dointvec_minmax_conv_param param = {
 		.min = (int *) table->extra1,
@@ -2774,7 +982,7 @@ static int do_proc_douintvec_minmax_conv(unsigned long *lvalp,
  * Returns 0 on success or -ERANGE on write when the range check fails.
  */
 int proc_douintvec_minmax(struct ctl_table *table, int write,
-			  void __user *buffer, size_t *lenp, loff_t *ppos)
+			  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct do_proc_douintvec_minmax_conv_param param = {
 		.min = (unsigned int *) table->extra1,
@@ -2805,7 +1013,7 @@ static int do_proc_dopipe_max_size_conv(unsigned long *lvalp,
 }
 
 static int proc_dopipe_max_size(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	return do_proc_douintvec(table, write, buffer, lenp, ppos,
 				 do_proc_dopipe_max_size_conv, NULL);
@@ -2826,7 +1034,7 @@ static void validate_coredump_safety(void)
 }
 
 static int proc_dointvec_minmax_coredump(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int error = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 	if (!error)
@@ -2836,7 +1044,7 @@ static int proc_dointvec_minmax_coredump(struct ctl_table *table, int write,
 
 #ifdef CONFIG_COREDUMP
 static int proc_dostring_coredump(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos)
+		  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int error = proc_dostring(table, write, buffer, lenp, ppos);
 	if (!error)
@@ -2847,7 +1055,7 @@ static int proc_dostring_coredump(struct ctl_table *table, int write,
 
 #ifdef CONFIG_MAGIC_SYSRQ
 static int sysrq_sysctl_handler(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int tmp, ret;
 
@@ -2865,16 +1073,14 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
 }
 #endif
 
-static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int write,
-				     void __user *buffer,
-				     size_t *lenp, loff_t *ppos,
-				     unsigned long convmul,
-				     unsigned long convdiv)
+static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table,
+		int write, void *buffer, size_t *lenp, loff_t *ppos,
+		unsigned long convmul, unsigned long convdiv)
 {
 	unsigned long *i, *min, *max;
 	int vleft, first = 1, err = 0;
 	size_t left;
-	char *kbuf = NULL, *p;
+	char *p;
 
 	if (!data || !table->maxlen || !*lenp || (*ppos && !write)) {
 		*lenp = 0;
@@ -2893,9 +1099,7 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int
 
 		if (left > PAGE_SIZE - 1)
 			left = PAGE_SIZE - 1;
-		p = kbuf = memdup_user_nul(buffer, left);
-		if (IS_ERR(kbuf))
-			return PTR_ERR(kbuf);
+		p = buffer;
 	}
 
 	for (; left && vleft--; i++, first = 0) {
@@ -2923,26 +1127,18 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int
 			*i = val;
 		} else {
 			val = convdiv * (*i) / convmul;
-			if (!first) {
-				err = proc_put_char(&buffer, &left, '\t');
-				if (err)
-					break;
-			}
-			err = proc_put_long(&buffer, &left, val, false);
-			if (err)
-				break;
+			if (!first)
+				proc_put_char(&buffer, &left, '\t');
+			proc_put_long(&buffer, &left, val, false);
 		}
 	}
 
 	if (!write && !first && left && !err)
-		err = proc_put_char(&buffer, &left, '\n');
+		proc_put_char(&buffer, &left, '\n');
 	if (write && !err)
 		left -= proc_skip_spaces(&p);
-	if (write) {
-		kfree(kbuf);
-		if (first)
-			return err ? : -EINVAL;
-	}
+	if (write && first)
+		return err ? : -EINVAL;
 	*lenp -= left;
 out:
 	*ppos += *lenp;
@@ -2950,10 +1146,8 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int
 }
 
 static int do_proc_doulongvec_minmax(struct ctl_table *table, int write,
-				     void __user *buffer,
-				     size_t *lenp, loff_t *ppos,
-				     unsigned long convmul,
-				     unsigned long convdiv)
+		void *buffer, size_t *lenp, loff_t *ppos, unsigned long convmul,
+		unsigned long convdiv)
 {
 	return __do_proc_doulongvec_minmax(table->data, table, write,
 			buffer, lenp, ppos, convmul, convdiv);
@@ -2976,7 +1170,7 @@ static int do_proc_doulongvec_minmax(struct ctl_table *table, int write,
  * Returns 0 on success.
  */
 int proc_doulongvec_minmax(struct ctl_table *table, int write,
-			   void __user *buffer, size_t *lenp, loff_t *ppos)
+			   void *buffer, size_t *lenp, loff_t *ppos)
 {
     return do_proc_doulongvec_minmax(table, write, buffer, lenp, ppos, 1l, 1l);
 }
@@ -2999,8 +1193,7 @@ int proc_doulongvec_minmax(struct ctl_table *table, int write,
  * Returns 0 on success.
  */
 int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
-				      void __user *buffer,
-				      size_t *lenp, loff_t *ppos)
+				      void *buffer, size_t *lenp, loff_t *ppos)
 {
     return do_proc_doulongvec_minmax(table, write, buffer,
 				     lenp, ppos, HZ, 1000l);
@@ -3094,7 +1287,7 @@ static int do_proc_dointvec_ms_jiffies_conv(bool *negp, unsigned long *lvalp,
  * Returns 0 on success.
  */
 int proc_dointvec_jiffies(struct ctl_table *table, int write,
-			  void __user *buffer, size_t *lenp, loff_t *ppos)
+			  void *buffer, size_t *lenp, loff_t *ppos)
 {
     return do_proc_dointvec(table,write,buffer,lenp,ppos,
 		    	    do_proc_dointvec_jiffies_conv,NULL);
@@ -3116,7 +1309,7 @@ int proc_dointvec_jiffies(struct ctl_table *table, int write,
  * Returns 0 on success.
  */
 int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp, loff_t *ppos)
+				 void *buffer, size_t *lenp, loff_t *ppos)
 {
     return do_proc_dointvec(table,write,buffer,lenp,ppos,
 		    	    do_proc_dointvec_userhz_jiffies_conv,NULL);
@@ -3138,15 +1331,15 @@ int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
  *
  * Returns 0 on success.
  */
-int proc_dointvec_ms_jiffies(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp, loff_t *ppos)
+int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	return do_proc_dointvec(table, write, buffer, lenp, ppos,
 				do_proc_dointvec_ms_jiffies_conv, NULL);
 }
 
-static int proc_do_cad_pid(struct ctl_table *table, int write,
-			   void __user *buffer, size_t *lenp, loff_t *ppos)
+static int proc_do_cad_pid(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	struct pid *new_pid;
 	pid_t tmp;
@@ -3185,7 +1378,7 @@ static int proc_do_cad_pid(struct ctl_table *table, int write,
  * Returns 0 on success.
  */
 int proc_do_large_bitmap(struct ctl_table *table, int write,
-			 void __user *buffer, size_t *lenp, loff_t *ppos)
+			 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int err = 0;
 	bool first = 1;
@@ -3201,7 +1394,7 @@ int proc_do_large_bitmap(struct ctl_table *table, int write,
 	}
 
 	if (write) {
-		char *kbuf, *p;
+		char *p = buffer;
 		size_t skipped = 0;
 
 		if (left > PAGE_SIZE - 1) {
@@ -3210,15 +1403,9 @@ int proc_do_large_bitmap(struct ctl_table *table, int write,
 			skipped = *lenp - left;
 		}
 
-		p = kbuf = memdup_user_nul(buffer, left);
-		if (IS_ERR(kbuf))
-			return PTR_ERR(kbuf);
-
 		tmp_bitmap = bitmap_zalloc(bitmap_len, GFP_KERNEL);
-		if (!tmp_bitmap) {
-			kfree(kbuf);
+		if (!tmp_bitmap)
 			return -ENOMEM;
-		}
 		proc_skip_char(&p, &left, '\n');
 		while (!err && left) {
 			unsigned long val_a, val_b;
@@ -3282,7 +1469,6 @@ int proc_do_large_bitmap(struct ctl_table *table, int write,
 			first = 0;
 			proc_skip_char(&p, &left, '\n');
 		}
-		kfree(kbuf);
 		left += skipped;
 	} else {
 		unsigned long bit_a, bit_b = 0;
@@ -3294,27 +1480,17 @@ int proc_do_large_bitmap(struct ctl_table *table, int write,
 			bit_b = find_next_zero_bit(bitmap, bitmap_len,
 						   bit_a + 1) - 1;
 
-			if (!first) {
-				err = proc_put_char(&buffer, &left, ',');
-				if (err)
-					break;
-			}
-			err = proc_put_long(&buffer, &left, bit_a, false);
-			if (err)
-				break;
+			if (!first)
+				proc_put_char(&buffer, &left, ',');
+			proc_put_long(&buffer, &left, bit_a, false);
 			if (bit_a != bit_b) {
-				err = proc_put_char(&buffer, &left, '-');
-				if (err)
-					break;
-				err = proc_put_long(&buffer, &left, bit_b, false);
-				if (err)
-					break;
+				proc_put_char(&buffer, &left, '-');
+				proc_put_long(&buffer, &left, bit_b, false);
 			}
 
 			first = 0; bit_b++;
 		}
-		if (!err)
-			err = proc_put_char(&buffer, &left, '\n');
+		proc_put_char(&buffer, &left, '\n');
 	}
 
 	if (!err) {
@@ -3335,106 +1511,1821 @@ int proc_do_large_bitmap(struct ctl_table *table, int write,
 #else /* CONFIG_PROC_SYSCTL */
 
 int proc_dostring(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos)
+		  void *buffer, size_t *lenp, loff_t *ppos)
+{
+	return -ENOSYS;
+}
+
+int proc_dointvec(struct ctl_table *table, int write,
+		  void *buffer, size_t *lenp, loff_t *ppos)
+{
+	return -ENOSYS;
+}
+
+int proc_douintvec(struct ctl_table *table, int write,
+		  void *buffer, size_t *lenp, loff_t *ppos)
+{
+	return -ENOSYS;
+}
+
+int proc_dointvec_minmax(struct ctl_table *table, int write,
+		    void *buffer, size_t *lenp, loff_t *ppos)
+{
+	return -ENOSYS;
+}
+
+int proc_douintvec_minmax(struct ctl_table *table, int write,
+			  void *buffer, size_t *lenp, loff_t *ppos)
+{
+	return -ENOSYS;
+}
+
+int proc_dointvec_jiffies(struct ctl_table *table, int write,
+		    void *buffer, size_t *lenp, loff_t *ppos)
+{
+	return -ENOSYS;
+}
+
+int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
+		    void *buffer, size_t *lenp, loff_t *ppos)
+{
+	return -ENOSYS;
+}
+
+int proc_dointvec_ms_jiffies(struct ctl_table *table, int write,
+			     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	return -ENOSYS;
 }
 
-int proc_dointvec(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos)
+int proc_doulongvec_minmax(struct ctl_table *table, int write,
+		    void *buffer, size_t *lenp, loff_t *ppos)
 {
 	return -ENOSYS;
 }
 
-int proc_douintvec(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos)
+int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
+				      void *buffer, size_t *lenp, loff_t *ppos)
 {
 	return -ENOSYS;
 }
 
-int proc_dointvec_minmax(struct ctl_table *table, int write,
-		    void __user *buffer, size_t *lenp, loff_t *ppos)
+int proc_do_large_bitmap(struct ctl_table *table, int write,
+			 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	return -ENOSYS;
 }
 
-int proc_douintvec_minmax(struct ctl_table *table, int write,
-			  void __user *buffer, size_t *lenp, loff_t *ppos)
-{
-	return -ENOSYS;
-}
+#endif /* CONFIG_PROC_SYSCTL */
+
+#if defined(CONFIG_SYSCTL)
+int proc_do_static_key(struct ctl_table *table, int write,
+		       void *buffer, size_t *lenp, loff_t *ppos)
+{
+	struct static_key *key = (struct static_key *)table->data;
+	static DEFINE_MUTEX(static_key_mutex);
+	int val, ret;
+	struct ctl_table tmp = {
+		.data   = &val,
+		.maxlen = sizeof(val),
+		.mode   = table->mode,
+		.extra1 = SYSCTL_ZERO,
+		.extra2 = SYSCTL_ONE,
+	};
+
+	if (write && !capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	mutex_lock(&static_key_mutex);
+	val = static_key_enabled(key);
+	ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
+	if (write && !ret) {
+		if (val)
+			static_key_enable(key);
+		else
+			static_key_disable(key);
+	}
+	mutex_unlock(&static_key_mutex);
+	return ret;
+}
+
+static struct ctl_table kern_table[] = {
+	{
+		.procname	= "sched_child_runs_first",
+		.data		= &sysctl_sched_child_runs_first,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#ifdef CONFIG_SCHED_DEBUG
+	{
+		.procname	= "sched_min_granularity_ns",
+		.data		= &sysctl_sched_min_granularity,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= sched_proc_update_handler,
+		.extra1		= &min_sched_granularity_ns,
+		.extra2		= &max_sched_granularity_ns,
+	},
+	{
+		.procname	= "sched_latency_ns",
+		.data		= &sysctl_sched_latency,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= sched_proc_update_handler,
+		.extra1		= &min_sched_granularity_ns,
+		.extra2		= &max_sched_granularity_ns,
+	},
+	{
+		.procname	= "sched_wakeup_granularity_ns",
+		.data		= &sysctl_sched_wakeup_granularity,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= sched_proc_update_handler,
+		.extra1		= &min_wakeup_granularity_ns,
+		.extra2		= &max_wakeup_granularity_ns,
+	},
+#ifdef CONFIG_SMP
+	{
+		.procname	= "sched_tunable_scaling",
+		.data		= &sysctl_sched_tunable_scaling,
+		.maxlen		= sizeof(enum sched_tunable_scaling),
+		.mode		= 0644,
+		.proc_handler	= sched_proc_update_handler,
+		.extra1		= &min_sched_tunable_scaling,
+		.extra2		= &max_sched_tunable_scaling,
+	},
+	{
+		.procname	= "sched_migration_cost_ns",
+		.data		= &sysctl_sched_migration_cost,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "sched_nr_migrate",
+		.data		= &sysctl_sched_nr_migrate,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#ifdef CONFIG_SCHEDSTATS
+	{
+		.procname	= "sched_schedstats",
+		.data		= NULL,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= sysctl_schedstats,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif /* CONFIG_SCHEDSTATS */
+#endif /* CONFIG_SMP */
+#ifdef CONFIG_NUMA_BALANCING
+	{
+		.procname	= "numa_balancing_scan_delay_ms",
+		.data		= &sysctl_numa_balancing_scan_delay,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "numa_balancing_scan_period_min_ms",
+		.data		= &sysctl_numa_balancing_scan_period_min,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "numa_balancing_scan_period_max_ms",
+		.data		= &sysctl_numa_balancing_scan_period_max,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "numa_balancing_scan_size_mb",
+		.data		= &sysctl_numa_balancing_scan_size,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "numa_balancing",
+		.data		= NULL, /* filled in by handler */
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= sysctl_numa_balancing,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif /* CONFIG_NUMA_BALANCING */
+#endif /* CONFIG_SCHED_DEBUG */
+	{
+		.procname	= "sched_rt_period_us",
+		.data		= &sysctl_sched_rt_period,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= sched_rt_handler,
+	},
+	{
+		.procname	= "sched_rt_runtime_us",
+		.data		= &sysctl_sched_rt_runtime,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= sched_rt_handler,
+	},
+	{
+		.procname	= "sched_rr_timeslice_ms",
+		.data		= &sysctl_sched_rr_timeslice,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= sched_rr_handler,
+	},
+#ifdef CONFIG_UCLAMP_TASK
+	{
+		.procname	= "sched_util_clamp_min",
+		.data		= &sysctl_sched_uclamp_util_min,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= sysctl_sched_uclamp_handler,
+	},
+	{
+		.procname	= "sched_util_clamp_max",
+		.data		= &sysctl_sched_uclamp_util_max,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= sysctl_sched_uclamp_handler,
+	},
+#endif
+#ifdef CONFIG_SCHED_AUTOGROUP
+	{
+		.procname	= "sched_autogroup_enabled",
+		.data		= &sysctl_sched_autogroup_enabled,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+#ifdef CONFIG_CFS_BANDWIDTH
+	{
+		.procname	= "sched_cfs_bandwidth_slice_us",
+		.data		= &sysctl_sched_cfs_bandwidth_slice,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ONE,
+	},
+#endif
+#if defined(CONFIG_ENERGY_MODEL) && defined(CONFIG_CPU_FREQ_GOV_SCHEDUTIL)
+	{
+		.procname	= "sched_energy_aware",
+		.data		= &sysctl_sched_energy_aware,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= sched_energy_aware_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+#ifdef CONFIG_PROVE_LOCKING
+	{
+		.procname	= "prove_locking",
+		.data		= &prove_locking,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_LOCK_STAT
+	{
+		.procname	= "lock_stat",
+		.data		= &lock_stat,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+	{
+		.procname	= "panic",
+		.data		= &panic_timeout,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#ifdef CONFIG_COREDUMP
+	{
+		.procname	= "core_uses_pid",
+		.data		= &core_uses_pid,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "core_pattern",
+		.data		= core_pattern,
+		.maxlen		= CORENAME_MAX_SIZE,
+		.mode		= 0644,
+		.proc_handler	= proc_dostring_coredump,
+	},
+	{
+		.procname	= "core_pipe_limit",
+		.data		= &core_pipe_limit,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_PROC_SYSCTL
+	{
+		.procname	= "tainted",
+		.maxlen 	= sizeof(long),
+		.mode		= 0644,
+		.proc_handler	= proc_taint,
+	},
+	{
+		.procname	= "sysctl_writes_strict",
+		.data		= &sysctl_writes_strict,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &neg_one,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+#ifdef CONFIG_LATENCYTOP
+	{
+		.procname	= "latencytop",
+		.data		= &latencytop_enabled,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= sysctl_latencytop,
+	},
+#endif
+#ifdef CONFIG_BLK_DEV_INITRD
+	{
+		.procname	= "real-root-dev",
+		.data		= &real_root_dev,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+	{
+		.procname	= "print-fatal-signals",
+		.data		= &print_fatal_signals,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#ifdef CONFIG_SPARC
+	{
+		.procname	= "reboot-cmd",
+		.data		= reboot_command,
+		.maxlen		= 256,
+		.mode		= 0644,
+		.proc_handler	= proc_dostring,
+	},
+	{
+		.procname	= "stop-a",
+		.data		= &stop_a_enabled,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "scons-poweroff",
+		.data		= &scons_pwroff,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_SPARC64
+	{
+		.procname	= "tsb-ratio",
+		.data		= &sysctl_tsb_ratio,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_PARISC
+	{
+		.procname	= "soft-power",
+		.data		= &pwrsw_enabled,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW
+	{
+		.procname	= "unaligned-trap",
+		.data		= &unaligned_enabled,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+	{
+		.procname	= "ctrl-alt-del",
+		.data		= &C_A_D,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#ifdef CONFIG_FUNCTION_TRACER
+	{
+		.procname	= "ftrace_enabled",
+		.data		= &ftrace_enabled,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= ftrace_enable_sysctl,
+	},
+#endif
+#ifdef CONFIG_STACK_TRACER
+	{
+		.procname	= "stack_tracer_enabled",
+		.data		= &stack_tracer_enabled,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= stack_trace_sysctl,
+	},
+#endif
+#ifdef CONFIG_TRACING
+	{
+		.procname	= "ftrace_dump_on_oops",
+		.data		= &ftrace_dump_on_oops,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "traceoff_on_warning",
+		.data		= &__disable_trace_on_warning,
+		.maxlen		= sizeof(__disable_trace_on_warning),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "tracepoint_printk",
+		.data		= &tracepoint_printk,
+		.maxlen		= sizeof(tracepoint_printk),
+		.mode		= 0644,
+		.proc_handler	= tracepoint_printk_sysctl,
+	},
+#endif
+#ifdef CONFIG_KEXEC_CORE
+	{
+		.procname	= "kexec_load_disabled",
+		.data		= &kexec_load_disabled,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		/* only handle a transition from default "0" to "1" */
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ONE,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+#ifdef CONFIG_MODULES
+	{
+		.procname	= "modprobe",
+		.data		= &modprobe_path,
+		.maxlen		= KMOD_PATH_LEN,
+		.mode		= 0644,
+		.proc_handler	= proc_dostring,
+	},
+	{
+		.procname	= "modules_disabled",
+		.data		= &modules_disabled,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		/* only handle a transition from default "0" to "1" */
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ONE,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+#ifdef CONFIG_UEVENT_HELPER
+	{
+		.procname	= "hotplug",
+		.data		= &uevent_helper,
+		.maxlen		= UEVENT_HELPER_PATH_LEN,
+		.mode		= 0644,
+		.proc_handler	= proc_dostring,
+	},
+#endif
+#ifdef CONFIG_CHR_DEV_SG
+	{
+		.procname	= "sg-big-buff",
+		.data		= &sg_big_buff,
+		.maxlen		= sizeof (int),
+		.mode		= 0444,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_BSD_PROCESS_ACCT
+	{
+		.procname	= "acct",
+		.data		= &acct_parm,
+		.maxlen		= 3*sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_MAGIC_SYSRQ
+	{
+		.procname	= "sysrq",
+		.data		= NULL,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= sysrq_sysctl_handler,
+	},
+#endif
+#ifdef CONFIG_PROC_SYSCTL
+	{
+		.procname	= "cad_pid",
+		.data		= NULL,
+		.maxlen		= sizeof (int),
+		.mode		= 0600,
+		.proc_handler	= proc_do_cad_pid,
+	},
+#endif
+	{
+		.procname	= "threads-max",
+		.data		= NULL,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= sysctl_max_threads,
+	},
+	{
+		.procname	= "random",
+		.mode		= 0555,
+		.child		= random_table,
+	},
+	{
+		.procname	= "usermodehelper",
+		.mode		= 0555,
+		.child		= usermodehelper_table,
+	},
+#ifdef CONFIG_FW_LOADER_USER_HELPER
+	{
+		.procname	= "firmware_config",
+		.mode		= 0555,
+		.child		= firmware_config_table,
+	},
+#endif
+	{
+		.procname	= "overflowuid",
+		.data		= &overflowuid,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &minolduid,
+		.extra2		= &maxolduid,
+	},
+	{
+		.procname	= "overflowgid",
+		.data		= &overflowgid,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &minolduid,
+		.extra2		= &maxolduid,
+	},
+#ifdef CONFIG_S390
+	{
+		.procname	= "userprocess_debug",
+		.data		= &show_unhandled_signals,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_SMP
+	{
+		.procname	= "oops_all_cpu_backtrace",
+		.data		= &sysctl_oops_all_cpu_backtrace,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif /* CONFIG_SMP */
+	{
+		.procname	= "pid_max",
+		.data		= &pid_max,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &pid_max_min,
+		.extra2		= &pid_max_max,
+	},
+	{
+		.procname	= "panic_on_oops",
+		.data		= &panic_on_oops,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "panic_print",
+		.data		= &panic_print,
+		.maxlen		= sizeof(unsigned long),
+		.mode		= 0644,
+		.proc_handler	= proc_doulongvec_minmax,
+	},
+#if defined CONFIG_PRINTK
+	{
+		.procname	= "printk",
+		.data		= &console_loglevel,
+		.maxlen		= 4*sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "printk_ratelimit",
+		.data		= &printk_ratelimit_state.interval,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_jiffies,
+	},
+	{
+		.procname	= "printk_ratelimit_burst",
+		.data		= &printk_ratelimit_state.burst,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "printk_delay",
+		.data		= &printk_delay_msec,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &ten_thousand,
+	},
+	{
+		.procname	= "printk_devkmsg",
+		.data		= devkmsg_log_str,
+		.maxlen		= DEVKMSG_STR_MAX_SIZE,
+		.mode		= 0644,
+		.proc_handler	= devkmsg_sysctl_set_loglvl,
+	},
+	{
+		.procname	= "dmesg_restrict",
+		.data		= &dmesg_restrict,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax_sysadmin,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "kptr_restrict",
+		.data		= &kptr_restrict,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax_sysadmin,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &two,
+	},
+#endif
+	{
+		.procname	= "ngroups_max",
+		.data		= &ngroups_max,
+		.maxlen		= sizeof (int),
+		.mode		= 0444,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "cap_last_cap",
+		.data		= (void *)&cap_last_cap,
+		.maxlen		= sizeof(int),
+		.mode		= 0444,
+		.proc_handler	= proc_dointvec,
+	},
+#if defined(CONFIG_LOCKUP_DETECTOR)
+	{
+		.procname       = "watchdog",
+		.data		= &watchdog_user_enabled,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler   = proc_watchdog,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "watchdog_thresh",
+		.data		= &watchdog_thresh,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_watchdog_thresh,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &sixty,
+	},
+	{
+		.procname       = "nmi_watchdog",
+		.data		= &nmi_watchdog_user_enabled,
+		.maxlen		= sizeof(int),
+		.mode		= NMI_WATCHDOG_SYSCTL_PERM,
+		.proc_handler   = proc_nmi_watchdog,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "watchdog_cpumask",
+		.data		= &watchdog_cpumask_bits,
+		.maxlen		= NR_CPUS,
+		.mode		= 0644,
+		.proc_handler	= proc_watchdog_cpumask,
+	},
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
+	{
+		.procname       = "soft_watchdog",
+		.data		= &soft_watchdog_user_enabled,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler   = proc_soft_watchdog,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "softlockup_panic",
+		.data		= &softlockup_panic,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#ifdef CONFIG_SMP
+	{
+		.procname	= "softlockup_all_cpu_backtrace",
+		.data		= &sysctl_softlockup_all_cpu_backtrace,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif /* CONFIG_SMP */
+#endif
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+	{
+		.procname	= "hardlockup_panic",
+		.data		= &hardlockup_panic,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#ifdef CONFIG_SMP
+	{
+		.procname	= "hardlockup_all_cpu_backtrace",
+		.data		= &sysctl_hardlockup_all_cpu_backtrace,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif /* CONFIG_SMP */
+#endif
+#endif
+
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
+	{
+		.procname       = "unknown_nmi_panic",
+		.data           = &unknown_nmi_panic,
+		.maxlen         = sizeof (int),
+		.mode           = 0644,
+		.proc_handler   = proc_dointvec,
+	},
+#endif
 
-int proc_dointvec_jiffies(struct ctl_table *table, int write,
-		    void __user *buffer, size_t *lenp, loff_t *ppos)
-{
-	return -ENOSYS;
-}
+#if (defined(CONFIG_X86_32) || defined(CONFIG_PARISC)) && \
+	defined(CONFIG_DEBUG_STACKOVERFLOW)
+	{
+		.procname	= "panic_on_stackoverflow",
+		.data		= &sysctl_panic_on_stackoverflow,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#if defined(CONFIG_X86)
+	{
+		.procname	= "panic_on_unrecovered_nmi",
+		.data		= &panic_on_unrecovered_nmi,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "panic_on_io_nmi",
+		.data		= &panic_on_io_nmi,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "bootloader_type",
+		.data		= &bootloader_type,
+		.maxlen		= sizeof (int),
+		.mode		= 0444,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "bootloader_version",
+		.data		= &bootloader_version,
+		.maxlen		= sizeof (int),
+		.mode		= 0444,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "io_delay_type",
+		.data		= &io_delay_type,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#if defined(CONFIG_MMU)
+	{
+		.procname	= "randomize_va_space",
+		.data		= &randomize_va_space,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#if defined(CONFIG_S390) && defined(CONFIG_SMP)
+	{
+		.procname	= "spin_retry",
+		.data		= &spin_retry,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#if	defined(CONFIG_ACPI_SLEEP) && defined(CONFIG_X86)
+	{
+		.procname	= "acpi_video_flags",
+		.data		= &acpi_realmode_flags,
+		.maxlen		= sizeof (unsigned long),
+		.mode		= 0644,
+		.proc_handler	= proc_doulongvec_minmax,
+	},
+#endif
+#ifdef CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN
+	{
+		.procname	= "ignore-unaligned-usertrap",
+		.data		= &no_unaligned_warning,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_IA64
+	{
+		.procname	= "unaligned-dump-stack",
+		.data		= &unaligned_dump_stack,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_DETECT_HUNG_TASK
+#ifdef CONFIG_SMP
+	{
+		.procname	= "hung_task_all_cpu_backtrace",
+		.data		= &sysctl_hung_task_all_cpu_backtrace,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif /* CONFIG_SMP */
+	{
+		.procname	= "hung_task_panic",
+		.data		= &sysctl_hung_task_panic,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "hung_task_check_count",
+		.data		= &sysctl_hung_task_check_count,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+	},
+	{
+		.procname	= "hung_task_timeout_secs",
+		.data		= &sysctl_hung_task_timeout_secs,
+		.maxlen		= sizeof(unsigned long),
+		.mode		= 0644,
+		.proc_handler	= proc_dohung_task_timeout_secs,
+		.extra2		= &hung_task_timeout_max,
+	},
+	{
+		.procname	= "hung_task_check_interval_secs",
+		.data		= &sysctl_hung_task_check_interval_secs,
+		.maxlen		= sizeof(unsigned long),
+		.mode		= 0644,
+		.proc_handler	= proc_dohung_task_timeout_secs,
+		.extra2		= &hung_task_timeout_max,
+	},
+	{
+		.procname	= "hung_task_warnings",
+		.data		= &sysctl_hung_task_warnings,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &neg_one,
+	},
+#endif
+#ifdef CONFIG_RT_MUTEXES
+	{
+		.procname	= "max_lock_depth",
+		.data		= &max_lock_depth,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+	{
+		.procname	= "poweroff_cmd",
+		.data		= &poweroff_cmd,
+		.maxlen		= POWEROFF_CMD_PATH_LEN,
+		.mode		= 0644,
+		.proc_handler	= proc_dostring,
+	},
+#ifdef CONFIG_KEYS
+	{
+		.procname	= "keys",
+		.mode		= 0555,
+		.child		= key_sysctls,
+	},
+#endif
+#ifdef CONFIG_PERF_EVENTS
+	/*
+	 * User-space scripts rely on the existence of this file
+	 * as a feature check for perf_events being enabled.
+	 *
+	 * So it's an ABI, do not remove!
+	 */
+	{
+		.procname	= "perf_event_paranoid",
+		.data		= &sysctl_perf_event_paranoid,
+		.maxlen		= sizeof(sysctl_perf_event_paranoid),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "perf_event_mlock_kb",
+		.data		= &sysctl_perf_event_mlock,
+		.maxlen		= sizeof(sysctl_perf_event_mlock),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "perf_event_max_sample_rate",
+		.data		= &sysctl_perf_event_sample_rate,
+		.maxlen		= sizeof(sysctl_perf_event_sample_rate),
+		.mode		= 0644,
+		.proc_handler	= perf_proc_update_handler,
+		.extra1		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "perf_cpu_time_max_percent",
+		.data		= &sysctl_perf_cpu_time_max_percent,
+		.maxlen		= sizeof(sysctl_perf_cpu_time_max_percent),
+		.mode		= 0644,
+		.proc_handler	= perf_cpu_time_max_percent_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &one_hundred,
+	},
+	{
+		.procname	= "perf_event_max_stack",
+		.data		= &sysctl_perf_event_max_stack,
+		.maxlen		= sizeof(sysctl_perf_event_max_stack),
+		.mode		= 0644,
+		.proc_handler	= perf_event_max_stack_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &six_hundred_forty_kb,
+	},
+	{
+		.procname	= "perf_event_max_contexts_per_stack",
+		.data		= &sysctl_perf_event_max_contexts_per_stack,
+		.maxlen		= sizeof(sysctl_perf_event_max_contexts_per_stack),
+		.mode		= 0644,
+		.proc_handler	= perf_event_max_stack_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &one_thousand,
+	},
+#endif
+	{
+		.procname	= "panic_on_warn",
+		.data		= &panic_on_warn,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
+	{
+		.procname	= "timer_migration",
+		.data		= &sysctl_timer_migration,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= timer_migration_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+#ifdef CONFIG_BPF_SYSCALL
+	{
+		.procname	= "unprivileged_bpf_disabled",
+		.data		= &sysctl_unprivileged_bpf_disabled,
+		.maxlen		= sizeof(sysctl_unprivileged_bpf_disabled),
+		.mode		= 0644,
+		/* only handle a transition from default "0" to "1" */
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ONE,
+		.extra2		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "bpf_stats_enabled",
+		.data		= &bpf_stats_enabled_key.key,
+		.maxlen		= sizeof(bpf_stats_enabled_key),
+		.mode		= 0644,
+		.proc_handler	= proc_do_static_key,
+	},
+#endif
+#if defined(CONFIG_TREE_RCU)
+	{
+		.procname	= "panic_on_rcu_stall",
+		.data		= &sysctl_panic_on_rcu_stall,
+		.maxlen		= sizeof(sysctl_panic_on_rcu_stall),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+#ifdef CONFIG_STACKLEAK_RUNTIME_DISABLE
+	{
+		.procname	= "stack_erasing",
+		.data		= NULL,
+		.maxlen		= sizeof(int),
+		.mode		= 0600,
+		.proc_handler	= stack_erasing_sysctl,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+	{ }
+};
 
-int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
-		    void __user *buffer, size_t *lenp, loff_t *ppos)
-{
-	return -ENOSYS;
-}
+static struct ctl_table vm_table[] = {
+	{
+		.procname	= "overcommit_memory",
+		.data		= &sysctl_overcommit_memory,
+		.maxlen		= sizeof(sysctl_overcommit_memory),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &two,
+	},
+	{
+		.procname	= "panic_on_oom",
+		.data		= &sysctl_panic_on_oom,
+		.maxlen		= sizeof(sysctl_panic_on_oom),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &two,
+	},
+	{
+		.procname	= "oom_kill_allocating_task",
+		.data		= &sysctl_oom_kill_allocating_task,
+		.maxlen		= sizeof(sysctl_oom_kill_allocating_task),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "oom_dump_tasks",
+		.data		= &sysctl_oom_dump_tasks,
+		.maxlen		= sizeof(sysctl_oom_dump_tasks),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "overcommit_ratio",
+		.data		= &sysctl_overcommit_ratio,
+		.maxlen		= sizeof(sysctl_overcommit_ratio),
+		.mode		= 0644,
+		.proc_handler	= overcommit_ratio_handler,
+	},
+	{
+		.procname	= "overcommit_kbytes",
+		.data		= &sysctl_overcommit_kbytes,
+		.maxlen		= sizeof(sysctl_overcommit_kbytes),
+		.mode		= 0644,
+		.proc_handler	= overcommit_kbytes_handler,
+	},
+	{
+		.procname	= "page-cluster",
+		.data		= &page_cluster,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+	},
+	{
+		.procname	= "dirty_background_ratio",
+		.data		= &dirty_background_ratio,
+		.maxlen		= sizeof(dirty_background_ratio),
+		.mode		= 0644,
+		.proc_handler	= dirty_background_ratio_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &one_hundred,
+	},
+	{
+		.procname	= "dirty_background_bytes",
+		.data		= &dirty_background_bytes,
+		.maxlen		= sizeof(dirty_background_bytes),
+		.mode		= 0644,
+		.proc_handler	= dirty_background_bytes_handler,
+		.extra1		= &one_ul,
+	},
+	{
+		.procname	= "dirty_ratio",
+		.data		= &vm_dirty_ratio,
+		.maxlen		= sizeof(vm_dirty_ratio),
+		.mode		= 0644,
+		.proc_handler	= dirty_ratio_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &one_hundred,
+	},
+	{
+		.procname	= "dirty_bytes",
+		.data		= &vm_dirty_bytes,
+		.maxlen		= sizeof(vm_dirty_bytes),
+		.mode		= 0644,
+		.proc_handler	= dirty_bytes_handler,
+		.extra1		= &dirty_bytes_min,
+	},
+	{
+		.procname	= "dirty_writeback_centisecs",
+		.data		= &dirty_writeback_interval,
+		.maxlen		= sizeof(dirty_writeback_interval),
+		.mode		= 0644,
+		.proc_handler	= dirty_writeback_centisecs_handler,
+	},
+	{
+		.procname	= "dirty_expire_centisecs",
+		.data		= &dirty_expire_interval,
+		.maxlen		= sizeof(dirty_expire_interval),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+	},
+	{
+		.procname	= "dirtytime_expire_seconds",
+		.data		= &dirtytime_expire_interval,
+		.maxlen		= sizeof(dirtytime_expire_interval),
+		.mode		= 0644,
+		.proc_handler	= dirtytime_interval_handler,
+		.extra1		= SYSCTL_ZERO,
+	},
+	{
+		.procname	= "swappiness",
+		.data		= &vm_swappiness,
+		.maxlen		= sizeof(vm_swappiness),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &one_hundred,
+	},
+#ifdef CONFIG_HUGETLB_PAGE
+	{
+		.procname	= "nr_hugepages",
+		.data		= NULL,
+		.maxlen		= sizeof(unsigned long),
+		.mode		= 0644,
+		.proc_handler	= hugetlb_sysctl_handler,
+	},
+#ifdef CONFIG_NUMA
+	{
+		.procname       = "nr_hugepages_mempolicy",
+		.data           = NULL,
+		.maxlen         = sizeof(unsigned long),
+		.mode           = 0644,
+		.proc_handler   = &hugetlb_mempolicy_sysctl_handler,
+	},
+	{
+		.procname		= "numa_stat",
+		.data			= &sysctl_vm_numa_stat,
+		.maxlen			= sizeof(int),
+		.mode			= 0644,
+		.proc_handler	= sysctl_vm_numa_stat_handler,
+		.extra1			= SYSCTL_ZERO,
+		.extra2			= SYSCTL_ONE,
+	},
+#endif
+	 {
+		.procname	= "hugetlb_shm_group",
+		.data		= &sysctl_hugetlb_shm_group,
+		.maxlen		= sizeof(gid_t),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	 },
+	{
+		.procname	= "nr_overcommit_hugepages",
+		.data		= NULL,
+		.maxlen		= sizeof(unsigned long),
+		.mode		= 0644,
+		.proc_handler	= hugetlb_overcommit_handler,
+	},
+#endif
+	{
+		.procname	= "lowmem_reserve_ratio",
+		.data		= &sysctl_lowmem_reserve_ratio,
+		.maxlen		= sizeof(sysctl_lowmem_reserve_ratio),
+		.mode		= 0644,
+		.proc_handler	= lowmem_reserve_ratio_sysctl_handler,
+	},
+	{
+		.procname	= "drop_caches",
+		.data		= &sysctl_drop_caches,
+		.maxlen		= sizeof(int),
+		.mode		= 0200,
+		.proc_handler	= drop_caches_sysctl_handler,
+		.extra1		= SYSCTL_ONE,
+		.extra2		= &four,
+	},
+#ifdef CONFIG_COMPACTION
+	{
+		.procname	= "compact_memory",
+		.data		= &sysctl_compact_memory,
+		.maxlen		= sizeof(int),
+		.mode		= 0200,
+		.proc_handler	= sysctl_compaction_handler,
+	},
+	{
+		.procname	= "extfrag_threshold",
+		.data		= &sysctl_extfrag_threshold,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &min_extfrag_threshold,
+		.extra2		= &max_extfrag_threshold,
+	},
+	{
+		.procname	= "compact_unevictable_allowed",
+		.data		= &sysctl_compact_unevictable_allowed,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax_warn_RT_change,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
 
-int proc_dointvec_ms_jiffies(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp, loff_t *ppos)
-{
-	return -ENOSYS;
-}
+#endif /* CONFIG_COMPACTION */
+	{
+		.procname	= "min_free_kbytes",
+		.data		= &min_free_kbytes,
+		.maxlen		= sizeof(min_free_kbytes),
+		.mode		= 0644,
+		.proc_handler	= min_free_kbytes_sysctl_handler,
+		.extra1		= SYSCTL_ZERO,
+	},
+	{
+		.procname	= "watermark_boost_factor",
+		.data		= &watermark_boost_factor,
+		.maxlen		= sizeof(watermark_boost_factor),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+	},
+	{
+		.procname	= "watermark_scale_factor",
+		.data		= &watermark_scale_factor,
+		.maxlen		= sizeof(watermark_scale_factor),
+		.mode		= 0644,
+		.proc_handler	= watermark_scale_factor_sysctl_handler,
+		.extra1		= SYSCTL_ONE,
+		.extra2		= &one_thousand,
+	},
+	{
+		.procname	= "percpu_pagelist_fraction",
+		.data		= &percpu_pagelist_fraction,
+		.maxlen		= sizeof(percpu_pagelist_fraction),
+		.mode		= 0644,
+		.proc_handler	= percpu_pagelist_fraction_sysctl_handler,
+		.extra1		= SYSCTL_ZERO,
+	},
+#ifdef CONFIG_MMU
+	{
+		.procname	= "max_map_count",
+		.data		= &sysctl_max_map_count,
+		.maxlen		= sizeof(sysctl_max_map_count),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+	},
+#else
+	{
+		.procname	= "nr_trim_pages",
+		.data		= &sysctl_nr_trim_pages,
+		.maxlen		= sizeof(sysctl_nr_trim_pages),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+	},
+#endif
+	{
+		.procname	= "laptop_mode",
+		.data		= &laptop_mode,
+		.maxlen		= sizeof(laptop_mode),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_jiffies,
+	},
+	{
+		.procname	= "block_dump",
+		.data		= &block_dump,
+		.maxlen		= sizeof(block_dump),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+		.extra1		= SYSCTL_ZERO,
+	},
+	{
+		.procname	= "vfs_cache_pressure",
+		.data		= &sysctl_vfs_cache_pressure,
+		.maxlen		= sizeof(sysctl_vfs_cache_pressure),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+		.extra1		= SYSCTL_ZERO,
+	},
+#if defined(HAVE_ARCH_PICK_MMAP_LAYOUT) || \
+    defined(CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
+	{
+		.procname	= "legacy_va_layout",
+		.data		= &sysctl_legacy_va_layout,
+		.maxlen		= sizeof(sysctl_legacy_va_layout),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+		.extra1		= SYSCTL_ZERO,
+	},
+#endif
+#ifdef CONFIG_NUMA
+	{
+		.procname	= "zone_reclaim_mode",
+		.data		= &node_reclaim_mode,
+		.maxlen		= sizeof(node_reclaim_mode),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+		.extra1		= SYSCTL_ZERO,
+	},
+	{
+		.procname	= "min_unmapped_ratio",
+		.data		= &sysctl_min_unmapped_ratio,
+		.maxlen		= sizeof(sysctl_min_unmapped_ratio),
+		.mode		= 0644,
+		.proc_handler	= sysctl_min_unmapped_ratio_sysctl_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &one_hundred,
+	},
+	{
+		.procname	= "min_slab_ratio",
+		.data		= &sysctl_min_slab_ratio,
+		.maxlen		= sizeof(sysctl_min_slab_ratio),
+		.mode		= 0644,
+		.proc_handler	= sysctl_min_slab_ratio_sysctl_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &one_hundred,
+	},
+#endif
+#ifdef CONFIG_SMP
+	{
+		.procname	= "stat_interval",
+		.data		= &sysctl_stat_interval,
+		.maxlen		= sizeof(sysctl_stat_interval),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_jiffies,
+	},
+	{
+		.procname	= "stat_refresh",
+		.data		= NULL,
+		.maxlen		= 0,
+		.mode		= 0600,
+		.proc_handler	= vmstat_refresh,
+	},
+#endif
+#ifdef CONFIG_MMU
+	{
+		.procname	= "mmap_min_addr",
+		.data		= &dac_mmap_min_addr,
+		.maxlen		= sizeof(unsigned long),
+		.mode		= 0644,
+		.proc_handler	= mmap_min_addr_handler,
+	},
+#endif
+#ifdef CONFIG_NUMA
+	{
+		.procname	= "numa_zonelist_order",
+		.data		= &numa_zonelist_order,
+		.maxlen		= NUMA_ZONELIST_ORDER_LEN,
+		.mode		= 0644,
+		.proc_handler	= numa_zonelist_order_handler,
+	},
+#endif
+#if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
+   (defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
+	{
+		.procname	= "vdso_enabled",
+#ifdef CONFIG_X86_32
+		.data		= &vdso32_enabled,
+		.maxlen		= sizeof(vdso32_enabled),
+#else
+		.data		= &vdso_enabled,
+		.maxlen		= sizeof(vdso_enabled),
+#endif
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+		.extra1		= SYSCTL_ZERO,
+	},
+#endif
+#ifdef CONFIG_HIGHMEM
+	{
+		.procname	= "highmem_is_dirtyable",
+		.data		= &vm_highmem_is_dirtyable,
+		.maxlen		= sizeof(vm_highmem_is_dirtyable),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+#ifdef CONFIG_MEMORY_FAILURE
+	{
+		.procname	= "memory_failure_early_kill",
+		.data		= &sysctl_memory_failure_early_kill,
+		.maxlen		= sizeof(sysctl_memory_failure_early_kill),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "memory_failure_recovery",
+		.data		= &sysctl_memory_failure_recovery,
+		.maxlen		= sizeof(sysctl_memory_failure_recovery),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+	{
+		.procname	= "user_reserve_kbytes",
+		.data		= &sysctl_user_reserve_kbytes,
+		.maxlen		= sizeof(sysctl_user_reserve_kbytes),
+		.mode		= 0644,
+		.proc_handler	= proc_doulongvec_minmax,
+	},
+	{
+		.procname	= "admin_reserve_kbytes",
+		.data		= &sysctl_admin_reserve_kbytes,
+		.maxlen		= sizeof(sysctl_admin_reserve_kbytes),
+		.mode		= 0644,
+		.proc_handler	= proc_doulongvec_minmax,
+	},
+#ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS
+	{
+		.procname	= "mmap_rnd_bits",
+		.data		= &mmap_rnd_bits,
+		.maxlen		= sizeof(mmap_rnd_bits),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= (void *)&mmap_rnd_bits_min,
+		.extra2		= (void *)&mmap_rnd_bits_max,
+	},
+#endif
+#ifdef CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS
+	{
+		.procname	= "mmap_rnd_compat_bits",
+		.data		= &mmap_rnd_compat_bits,
+		.maxlen		= sizeof(mmap_rnd_compat_bits),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= (void *)&mmap_rnd_compat_bits_min,
+		.extra2		= (void *)&mmap_rnd_compat_bits_max,
+	},
+#endif
+#ifdef CONFIG_USERFAULTFD
+	{
+		.procname	= "unprivileged_userfaultfd",
+		.data		= &sysctl_unprivileged_userfaultfd,
+		.maxlen		= sizeof(sysctl_unprivileged_userfaultfd),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+	{ }
+};
 
-int proc_doulongvec_minmax(struct ctl_table *table, int write,
-		    void __user *buffer, size_t *lenp, loff_t *ppos)
-{
-	return -ENOSYS;
-}
+static struct ctl_table fs_table[] = {
+	{
+		.procname	= "inode-nr",
+		.data		= &inodes_stat,
+		.maxlen		= 2*sizeof(long),
+		.mode		= 0444,
+		.proc_handler	= proc_nr_inodes,
+	},
+	{
+		.procname	= "inode-state",
+		.data		= &inodes_stat,
+		.maxlen		= 7*sizeof(long),
+		.mode		= 0444,
+		.proc_handler	= proc_nr_inodes,
+	},
+	{
+		.procname	= "file-nr",
+		.data		= &files_stat,
+		.maxlen		= sizeof(files_stat),
+		.mode		= 0444,
+		.proc_handler	= proc_nr_files,
+	},
+	{
+		.procname	= "file-max",
+		.data		= &files_stat.max_files,
+		.maxlen		= sizeof(files_stat.max_files),
+		.mode		= 0644,
+		.proc_handler	= proc_doulongvec_minmax,
+		.extra1		= &zero_ul,
+		.extra2		= &long_max,
+	},
+	{
+		.procname	= "nr_open",
+		.data		= &sysctl_nr_open,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &sysctl_nr_open_min,
+		.extra2		= &sysctl_nr_open_max,
+	},
+	{
+		.procname	= "dentry-state",
+		.data		= &dentry_stat,
+		.maxlen		= 6*sizeof(long),
+		.mode		= 0444,
+		.proc_handler	= proc_nr_dentry,
+	},
+	{
+		.procname	= "overflowuid",
+		.data		= &fs_overflowuid,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &minolduid,
+		.extra2		= &maxolduid,
+	},
+	{
+		.procname	= "overflowgid",
+		.data		= &fs_overflowgid,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &minolduid,
+		.extra2		= &maxolduid,
+	},
+#ifdef CONFIG_FILE_LOCKING
+	{
+		.procname	= "leases-enable",
+		.data		= &leases_enable,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_DNOTIFY
+	{
+		.procname	= "dir-notify-enable",
+		.data		= &dir_notify_enable,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_MMU
+#ifdef CONFIG_FILE_LOCKING
+	{
+		.procname	= "lease-break-time",
+		.data		= &lease_break_time,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
+#ifdef CONFIG_AIO
+	{
+		.procname	= "aio-nr",
+		.data		= &aio_nr,
+		.maxlen		= sizeof(aio_nr),
+		.mode		= 0444,
+		.proc_handler	= proc_doulongvec_minmax,
+	},
+	{
+		.procname	= "aio-max-nr",
+		.data		= &aio_max_nr,
+		.maxlen		= sizeof(aio_max_nr),
+		.mode		= 0644,
+		.proc_handler	= proc_doulongvec_minmax,
+	},
+#endif /* CONFIG_AIO */
+#ifdef CONFIG_INOTIFY_USER
+	{
+		.procname	= "inotify",
+		.mode		= 0555,
+		.child		= inotify_table,
+	},
+#endif	
+#ifdef CONFIG_EPOLL
+	{
+		.procname	= "epoll",
+		.mode		= 0555,
+		.child		= epoll_table,
+	},
+#endif
+#endif
+	{
+		.procname	= "protected_symlinks",
+		.data		= &sysctl_protected_symlinks,
+		.maxlen		= sizeof(int),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "protected_hardlinks",
+		.data		= &sysctl_protected_hardlinks,
+		.maxlen		= sizeof(int),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{
+		.procname	= "protected_fifos",
+		.data		= &sysctl_protected_fifos,
+		.maxlen		= sizeof(int),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &two,
+	},
+	{
+		.procname	= "protected_regular",
+		.data		= &sysctl_protected_regular,
+		.maxlen		= sizeof(int),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &two,
+	},
+	{
+		.procname	= "suid_dumpable",
+		.data		= &suid_dumpable,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax_coredump,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &two,
+	},
+#if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
+	{
+		.procname	= "binfmt_misc",
+		.mode		= 0555,
+		.child		= sysctl_mount_point,
+	},
+#endif
+	{
+		.procname	= "pipe-max-size",
+		.data		= &pipe_max_size,
+		.maxlen		= sizeof(pipe_max_size),
+		.mode		= 0644,
+		.proc_handler	= proc_dopipe_max_size,
+	},
+	{
+		.procname	= "pipe-user-pages-hard",
+		.data		= &pipe_user_pages_hard,
+		.maxlen		= sizeof(pipe_user_pages_hard),
+		.mode		= 0644,
+		.proc_handler	= proc_doulongvec_minmax,
+	},
+	{
+		.procname	= "pipe-user-pages-soft",
+		.data		= &pipe_user_pages_soft,
+		.maxlen		= sizeof(pipe_user_pages_soft),
+		.mode		= 0644,
+		.proc_handler	= proc_doulongvec_minmax,
+	},
+	{
+		.procname	= "mount-max",
+		.data		= &sysctl_mount_max,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ONE,
+	},
+	{ }
+};
 
-int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
-				      void __user *buffer,
-				      size_t *lenp, loff_t *ppos)
-{
-    return -ENOSYS;
-}
+static struct ctl_table debug_table[] = {
+#ifdef CONFIG_SYSCTL_EXCEPTION_TRACE
+	{
+		.procname	= "exception-trace",
+		.data		= &show_unhandled_signals,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec
+	},
+#endif
+#if defined(CONFIG_OPTPROBES)
+	{
+		.procname	= "kprobes-optimization",
+		.data		= &sysctl_kprobes_optimization,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_kprobes_optimization_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
+	{ }
+};
 
-int proc_do_large_bitmap(struct ctl_table *table, int write,
-			 void __user *buffer, size_t *lenp, loff_t *ppos)
-{
-	return -ENOSYS;
-}
+static struct ctl_table dev_table[] = {
+	{ }
+};
 
-#endif /* CONFIG_PROC_SYSCTL */
+static struct ctl_table sysctl_base_table[] = {
+	{
+		.procname	= "kernel",
+		.mode		= 0555,
+		.child		= kern_table,
+	},
+	{
+		.procname	= "vm",
+		.mode		= 0555,
+		.child		= vm_table,
+	},
+	{
+		.procname	= "fs",
+		.mode		= 0555,
+		.child		= fs_table,
+	},
+	{
+		.procname	= "debug",
+		.mode		= 0555,
+		.child		= debug_table,
+	},
+	{
+		.procname	= "dev",
+		.mode		= 0555,
+		.child		= dev_table,
+	},
+	{ }
+};
 
-#if defined(CONFIG_SYSCTL)
-int proc_do_static_key(struct ctl_table *table, int write,
-		       void __user *buffer, size_t *lenp,
-		       loff_t *ppos)
+int __init sysctl_init(void)
 {
-	struct static_key *key = (struct static_key *)table->data;
-	static DEFINE_MUTEX(static_key_mutex);
-	int val, ret;
-	struct ctl_table tmp = {
-		.data   = &val,
-		.maxlen = sizeof(val),
-		.mode   = table->mode,
-		.extra1 = SYSCTL_ZERO,
-		.extra2 = SYSCTL_ONE,
-	};
-
-	if (write && !capable(CAP_SYS_ADMIN))
-		return -EPERM;
+	struct ctl_table_header *hdr;
 
-	mutex_lock(&static_key_mutex);
-	val = static_key_enabled(key);
-	ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
-	if (write && !ret) {
-		if (val)
-			static_key_enable(key);
-		else
-			static_key_disable(key);
-	}
-	mutex_unlock(&static_key_mutex);
-	return ret;
+	hdr = register_sysctl_table(sysctl_base_table);
+	kmemleak_not_leak(hdr);
+	return 0;
 }
-#endif
+#endif /* CONFIG_SYSCTL */
 /*
  * No sense putting this after each symbol definition, twice,
  * exception granted :-)
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index a5221abb4594..398e6eadb861 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -249,8 +249,7 @@ void timers_update_nohz(void)
 }
 
 int timer_migration_handler(struct ctl_table *table, int write,
-			    void __user *buffer, size_t *lenp,
-			    loff_t *ppos)
+			    void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 402eef84c859..ae69010d521a 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -158,6 +158,7 @@ config FUNCTION_TRACER
 	select CONTEXT_SWITCH_TRACER
 	select GLOB
 	select TASKS_RCU if PREEMPTION
+	select TASKS_RUDE_RCU
 	help
 	  Enable the kernel to trace every kernel function. This is done
 	  by using a compiler feature to insert a small, 5-byte No-Operation
diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
index f9dcd19165fa..6b601d88bf71 100644
--- a/kernel/trace/Makefile
+++ b/kernel/trace/Makefile
@@ -6,6 +6,9 @@ ifdef CONFIG_FUNCTION_TRACER
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
 
+# Avoid recursion due to instrumentation.
+KCSAN_SANITIZE := n
+
 ifdef CONFIG_FTRACE_SELFTEST
 # selftest needs instrumentation
 CFLAGS_trace_selftest_dynamic.o = $(CC_FLAGS_FTRACE)
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index ca1796747a77..7523805c853b 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -797,6 +797,8 @@ bpf_tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_map_peek_elem_proto;
 	case BPF_FUNC_ktime_get_ns:
 		return &bpf_ktime_get_ns_proto;
+	case BPF_FUNC_ktime_get_boot_ns:
+		return &bpf_ktime_get_boot_ns_proto;
 	case BPF_FUNC_tail_call:
 		return &bpf_tail_call_proto;
 	case BPF_FUNC_get_current_pid_tgid:
@@ -1468,7 +1470,7 @@ int perf_event_query_prog_array(struct perf_event *event, void __user *info)
 	u32 *ids, prog_cnt, ids_len;
 	int ret;
 
-	if (!capable(CAP_SYS_ADMIN))
+	if (!perfmon_capable())
 		return -EPERM;
 	if (event->attr.type != PERF_TYPE_TRACEPOINT)
 		return -EINVAL;
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index bd030b1b9514..7d0ebd104706 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -160,17 +160,6 @@ static void ftrace_pid_func(unsigned long ip, unsigned long parent_ip,
 	op->saved_func(ip, parent_ip, op, regs);
 }
 
-static void ftrace_sync(struct work_struct *work)
-{
-	/*
-	 * This function is just a stub to implement a hard force
-	 * of synchronize_rcu(). This requires synchronizing
-	 * tasks even in userspace and idle.
-	 *
-	 * Yes, function tracing is rude.
-	 */
-}
-
 static void ftrace_sync_ipi(void *data)
 {
 	/* Probably not needed, but do it anyway */
@@ -256,7 +245,7 @@ static void update_ftrace_function(void)
 	 * Make sure all CPUs see this. Yes this is slow, but static
 	 * tracing is slow and nasty to have enabled.
 	 */
-	schedule_on_each_cpu(ftrace_sync);
+	synchronize_rcu_tasks_rude();
 	/* Now all cpus are using the list ops. */
 	function_trace_op = set_function_trace_op;
 	/* Make sure the function_trace_op is visible on all CPUs */
@@ -2031,12 +2020,12 @@ void ftrace_bug(int failed, struct dyn_ftrace *rec)
 	case -EFAULT:
 		FTRACE_WARN_ON_ONCE(1);
 		pr_info("ftrace faulted on modifying ");
-		print_ip_sym(ip);
+		print_ip_sym(KERN_INFO, ip);
 		break;
 	case -EINVAL:
 		FTRACE_WARN_ON_ONCE(1);
 		pr_info("ftrace failed to modify ");
-		print_ip_sym(ip);
+		print_ip_sym(KERN_INFO, ip);
 		print_ip_ins(" actual:   ", (unsigned char *)ip);
 		pr_cont("\n");
 		if (ftrace_expected) {
@@ -2047,12 +2036,12 @@ void ftrace_bug(int failed, struct dyn_ftrace *rec)
 	case -EPERM:
 		FTRACE_WARN_ON_ONCE(1);
 		pr_info("ftrace faulted on writing ");
-		print_ip_sym(ip);
+		print_ip_sym(KERN_INFO, ip);
 		break;
 	default:
 		FTRACE_WARN_ON_ONCE(1);
 		pr_info("ftrace faulted on unknown error ");
-		print_ip_sym(ip);
+		print_ip_sym(KERN_INFO, ip);
 	}
 	print_bug_type();
 	if (rec) {
@@ -2932,7 +2921,7 @@ int ftrace_shutdown(struct ftrace_ops *ops, int command)
 		 * infrastructure to do the synchronization, thus we must do it
 		 * ourselves.
 		 */
-		schedule_on_each_cpu(ftrace_sync);
+		synchronize_rcu_tasks_rude();
 
 		/*
 		 * When the kernel is preeptive, tasks can be preempted
@@ -5888,7 +5877,7 @@ ftrace_graph_release(struct inode *inode, struct file *file)
 		 * infrastructure to do the synchronization, thus we must do it
 		 * ourselves.
 		 */
-		schedule_on_each_cpu(ftrace_sync);
+		synchronize_rcu_tasks_rude();
 
 		free_ftrace_hash(old_hash);
 	}
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 8d2b98812625..167a74a15b1a 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2661,7 +2661,7 @@ static void output_printk(struct trace_event_buffer *fbuffer)
 }
 
 int tracepoint_printk_sysctl(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp,
+			     void *buffer, size_t *lenp,
 			     loff_t *ppos)
 {
 	int save_tracepoint_printk;
diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h
index a0ff9e200ef6..a22b62813f8c 100644
--- a/kernel/trace/trace_probe.h
+++ b/kernel/trace/trace_probe.h
@@ -236,7 +236,7 @@ struct trace_probe_event {
 	struct trace_event_call		call;
 	struct list_head 		files;
 	struct list_head		probes;
-	struct trace_uprobe_filter	filter[0];
+	struct trace_uprobe_filter	filter[];
 };
 
 struct trace_probe {
diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c
index 73956eaff8a9..3ee46cda2692 100644
--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -50,7 +50,7 @@ static bool ok_to_free_tracepoints;
  */
 struct tp_probes {
 	struct rcu_head rcu;
-	struct tracepoint_func probes[0];
+	struct tracepoint_func probes[];
 };
 
 static inline void *allocate_probes(int count)
diff --git a/kernel/umh.c b/kernel/umh.c
index 7f255b5a8845..b0d14e87ca43 100644
--- a/kernel/umh.c
+++ b/kernel/umh.c
@@ -544,6 +544,11 @@ EXPORT_SYMBOL_GPL(fork_usermode_blob);
  * Runs a user-space application.  The application is started
  * asynchronously if wait is not set, and runs as a child of system workqueues.
  * (ie. it runs with full root capabilities and optimized affinity).
+ *
+ * Note: successful return value does not guarantee the helper was called at
+ * all. You can't rely on sub_info->{init,cleanup} being called even for
+ * UMH_WAIT_* wait modes as STATIC_USERMODEHELPER_PATH="" turns all helpers
+ * into a successful no-op.
  */
 int call_usermodehelper_exec(struct subprocess_info *sub_info, int wait)
 {
@@ -630,7 +635,7 @@ int call_usermodehelper(const char *path, char **argv, char **envp, int wait)
 EXPORT_SYMBOL(call_usermodehelper);
 
 static int proc_cap_handler(struct ctl_table *table, int write,
-			 void __user *buffer, size_t *lenp, loff_t *ppos)
+			 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table t;
 	unsigned long cap_array[_KERNEL_CAPABILITY_U32S];
diff --git a/kernel/user.c b/kernel/user.c
index 5235d7f49982..b1635d94a1f2 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -82,7 +82,7 @@ EXPORT_SYMBOL_GPL(init_user_ns);
 #define uidhashentry(uid)	(uidhash_table + __uidhashfn((__kuid_val(uid))))
 
 static struct kmem_cache *uid_cachep;
-struct hlist_head uidhash_table[UIDHASH_SZ];
+static struct hlist_head uidhash_table[UIDHASH_SZ];
 
 /*
  * The uidhash_lock is mostly taken from process context, but it is
diff --git a/kernel/utsname_sysctl.c b/kernel/utsname_sysctl.c
index 3732c888a949..4ca61d49885b 100644
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -30,7 +30,7 @@ static void *get_uts(struct ctl_table *table)
  *	to observe. Should this be in kernel/sys.c ????
  */
 static int proc_do_uts_string(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos)
+		  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table uts_table;
 	int r;
diff --git a/kernel/watch_queue.c b/kernel/watch_queue.c
new file mode 100644
index 000000000000..9a9699c06709
--- /dev/null
+++ b/kernel/watch_queue.c
@@ -0,0 +1,659 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Watch queue and general notification mechanism, built on pipes
+ *
+ * Copyright (C) 2020 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * See Documentation/watch_queue.rst
+ */
+
+#define pr_fmt(fmt) "watchq: " fmt
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/printk.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/poll.h>
+#include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+#include <linux/file.h>
+#include <linux/security.h>
+#include <linux/cred.h>
+#include <linux/sched/signal.h>
+#include <linux/watch_queue.h>
+#include <linux/pipe_fs_i.h>
+
+MODULE_DESCRIPTION("Watch queue");
+MODULE_AUTHOR("Red Hat, Inc.");
+MODULE_LICENSE("GPL");
+
+#define WATCH_QUEUE_NOTE_SIZE 128
+#define WATCH_QUEUE_NOTES_PER_PAGE (PAGE_SIZE / WATCH_QUEUE_NOTE_SIZE)
+
+static void watch_queue_pipe_buf_release(struct pipe_inode_info *pipe,
+					 struct pipe_buffer *buf)
+{
+	struct watch_queue *wqueue = (struct watch_queue *)buf->private;
+	struct page *page;
+	unsigned int bit;
+
+	/* We need to work out which note within the page this refers to, but
+	 * the note might have been maximum size, so merely ANDing the offset
+	 * off doesn't work.  OTOH, the note must've been more than zero size.
+	 */
+	bit = buf->offset + buf->len;
+	if ((bit & (WATCH_QUEUE_NOTE_SIZE - 1)) == 0)
+		bit -= WATCH_QUEUE_NOTE_SIZE;
+	bit /= WATCH_QUEUE_NOTE_SIZE;
+
+	page = buf->page;
+	bit += page->index;
+
+	set_bit(bit, wqueue->notes_bitmap);
+}
+
+static int watch_queue_pipe_buf_steal(struct pipe_inode_info *pipe,
+				      struct pipe_buffer *buf)
+{
+	return -1; /* No. */
+}
+
+/* New data written to a pipe may be appended to a buffer with this type. */
+static const struct pipe_buf_operations watch_queue_pipe_buf_ops = {
+	.confirm	= generic_pipe_buf_confirm,
+	.release	= watch_queue_pipe_buf_release,
+	.steal		= watch_queue_pipe_buf_steal,
+	.get		= generic_pipe_buf_get,
+};
+
+/*
+ * Post a notification to a watch queue.
+ */
+static bool post_one_notification(struct watch_queue *wqueue,
+				  struct watch_notification *n)
+{
+	void *p;
+	struct pipe_inode_info *pipe = wqueue->pipe;
+	struct pipe_buffer *buf;
+	struct page *page;
+	unsigned int head, tail, mask, note, offset, len;
+	bool done = false;
+
+	if (!pipe)
+		return false;
+
+	spin_lock_irq(&pipe->rd_wait.lock);
+
+	if (wqueue->defunct)
+		goto out;
+
+	mask = pipe->ring_size - 1;
+	head = pipe->head;
+	tail = pipe->tail;
+	if (pipe_full(head, tail, pipe->ring_size))
+		goto lost;
+
+	note = find_first_bit(wqueue->notes_bitmap, wqueue->nr_notes);
+	if (note >= wqueue->nr_notes)
+		goto lost;
+
+	page = wqueue->notes[note / WATCH_QUEUE_NOTES_PER_PAGE];
+	offset = note % WATCH_QUEUE_NOTES_PER_PAGE * WATCH_QUEUE_NOTE_SIZE;
+	get_page(page);
+	len = n->info & WATCH_INFO_LENGTH;
+	p = kmap_atomic(page);
+	memcpy(p + offset, n, len);
+	kunmap_atomic(p);
+
+	buf = &pipe->bufs[head & mask];
+	buf->page = page;
+	buf->private = (unsigned long)wqueue;
+	buf->ops = &watch_queue_pipe_buf_ops;
+	buf->offset = offset;
+	buf->len = len;
+	buf->flags = PIPE_BUF_FLAG_WHOLE;
+	pipe->head = head + 1;
+
+	if (!test_and_clear_bit(note, wqueue->notes_bitmap)) {
+		spin_unlock_irq(&pipe->rd_wait.lock);
+		BUG();
+	}
+	wake_up_interruptible_sync_poll_locked(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
+	done = true;
+
+out:
+	spin_unlock_irq(&pipe->rd_wait.lock);
+	if (done)
+		kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
+	return done;
+
+lost:
+	buf = &pipe->bufs[(head - 1) & mask];
+	buf->flags |= PIPE_BUF_FLAG_LOSS;
+	goto out;
+}
+
+/*
+ * Apply filter rules to a notification.
+ */
+static bool filter_watch_notification(const struct watch_filter *wf,
+				      const struct watch_notification *n)
+{
+	const struct watch_type_filter *wt;
+	unsigned int st_bits = sizeof(wt->subtype_filter[0]) * 8;
+	unsigned int st_index = n->subtype / st_bits;
+	unsigned int st_bit = 1U << (n->subtype % st_bits);
+	int i;
+
+	if (!test_bit(n->type, wf->type_filter))
+		return false;
+
+	for (i = 0; i < wf->nr_filters; i++) {
+		wt = &wf->filters[i];
+		if (n->type == wt->type &&
+		    (wt->subtype_filter[st_index] & st_bit) &&
+		    (n->info & wt->info_mask) == wt->info_filter)
+			return true;
+	}
+
+	return false; /* If there is a filter, the default is to reject. */
+}
+
+/**
+ * __post_watch_notification - Post an event notification
+ * @wlist: The watch list to post the event to.
+ * @n: The notification record to post.
+ * @cred: The creds of the process that triggered the notification.
+ * @id: The ID to match on the watch.
+ *
+ * Post a notification of an event into a set of watch queues and let the users
+ * know.
+ *
+ * The size of the notification should be set in n->info & WATCH_INFO_LENGTH and
+ * should be in units of sizeof(*n).
+ */
+void __post_watch_notification(struct watch_list *wlist,
+			       struct watch_notification *n,
+			       const struct cred *cred,
+			       u64 id)
+{
+	const struct watch_filter *wf;
+	struct watch_queue *wqueue;
+	struct watch *watch;
+
+	if (((n->info & WATCH_INFO_LENGTH) >> WATCH_INFO_LENGTH__SHIFT) == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	rcu_read_lock();
+
+	hlist_for_each_entry_rcu(watch, &wlist->watchers, list_node) {
+		if (watch->id != id)
+			continue;
+		n->info &= ~WATCH_INFO_ID;
+		n->info |= watch->info_id;
+
+		wqueue = rcu_dereference(watch->queue);
+		wf = rcu_dereference(wqueue->filter);
+		if (wf && !filter_watch_notification(wf, n))
+			continue;
+
+		if (security_post_notification(watch->cred, cred, n) < 0)
+			continue;
+
+		post_one_notification(wqueue, n);
+	}
+
+	rcu_read_unlock();
+}
+EXPORT_SYMBOL(__post_watch_notification);
+
+/*
+ * Allocate sufficient pages to preallocation for the requested number of
+ * notifications.
+ */
+long watch_queue_set_size(struct pipe_inode_info *pipe, unsigned int nr_notes)
+{
+	struct watch_queue *wqueue = pipe->watch_queue;
+	struct page **pages;
+	unsigned long *bitmap;
+	unsigned long user_bufs;
+	unsigned int bmsize;
+	int ret, i, nr_pages;
+
+	if (!wqueue)
+		return -ENODEV;
+	if (wqueue->notes)
+		return -EBUSY;
+
+	if (nr_notes < 1 ||
+	    nr_notes > 512) /* TODO: choose a better hard limit */
+		return -EINVAL;
+
+	nr_pages = (nr_notes + WATCH_QUEUE_NOTES_PER_PAGE - 1);
+	nr_pages /= WATCH_QUEUE_NOTES_PER_PAGE;
+	user_bufs = account_pipe_buffers(pipe->user, pipe->nr_accounted, nr_pages);
+
+	if (nr_pages > pipe->max_usage &&
+	    (too_many_pipe_buffers_hard(user_bufs) ||
+	     too_many_pipe_buffers_soft(user_bufs)) &&
+	    pipe_is_unprivileged_user()) {
+		ret = -EPERM;
+		goto error;
+	}
+
+	ret = pipe_resize_ring(pipe, nr_notes);
+	if (ret < 0)
+		goto error;
+
+	pages = kcalloc(sizeof(struct page *), nr_pages, GFP_KERNEL);
+	if (!pages)
+		goto error;
+
+	for (i = 0; i < nr_pages; i++) {
+		pages[i] = alloc_page(GFP_KERNEL);
+		if (!pages[i])
+			goto error_p;
+		pages[i]->index = i * WATCH_QUEUE_NOTES_PER_PAGE;
+	}
+
+	bmsize = (nr_notes + BITS_PER_LONG - 1) / BITS_PER_LONG;
+	bmsize *= sizeof(unsigned long);
+	bitmap = kmalloc(bmsize, GFP_KERNEL);
+	if (!bitmap)
+		goto error_p;
+
+	memset(bitmap, 0xff, bmsize);
+	wqueue->notes = pages;
+	wqueue->notes_bitmap = bitmap;
+	wqueue->nr_pages = nr_pages;
+	wqueue->nr_notes = nr_pages * WATCH_QUEUE_NOTES_PER_PAGE;
+	return 0;
+
+error_p:
+	for (i = 0; i < nr_pages; i++)
+		__free_page(pages[i]);
+	kfree(pages);
+error:
+	(void) account_pipe_buffers(pipe->user, nr_pages, pipe->nr_accounted);
+	return ret;
+}
+
+/*
+ * Set the filter on a watch queue.
+ */
+long watch_queue_set_filter(struct pipe_inode_info *pipe,
+			    struct watch_notification_filter __user *_filter)
+{
+	struct watch_notification_type_filter *tf;
+	struct watch_notification_filter filter;
+	struct watch_type_filter *q;
+	struct watch_filter *wfilter;
+	struct watch_queue *wqueue = pipe->watch_queue;
+	int ret, nr_filter = 0, i;
+
+	if (!wqueue)
+		return -ENODEV;
+
+	if (!_filter) {
+		/* Remove the old filter */
+		wfilter = NULL;
+		goto set;
+	}
+
+	/* Grab the user's filter specification */
+	if (copy_from_user(&filter, _filter, sizeof(filter)) != 0)
+		return -EFAULT;
+	if (filter.nr_filters == 0 ||
+	    filter.nr_filters > 16 ||
+	    filter.__reserved != 0)
+		return -EINVAL;
+
+	tf = memdup_user(_filter->filters, filter.nr_filters * sizeof(*tf));
+	if (IS_ERR(tf))
+		return PTR_ERR(tf);
+
+	ret = -EINVAL;
+	for (i = 0; i < filter.nr_filters; i++) {
+		if ((tf[i].info_filter & ~tf[i].info_mask) ||
+		    tf[i].info_mask & WATCH_INFO_LENGTH)
+			goto err_filter;
+		/* Ignore any unknown types */
+		if (tf[i].type >= sizeof(wfilter->type_filter) * 8)
+			continue;
+		nr_filter++;
+	}
+
+	/* Now we need to build the internal filter from only the relevant
+	 * user-specified filters.
+	 */
+	ret = -ENOMEM;
+	wfilter = kzalloc(struct_size(wfilter, filters, nr_filter), GFP_KERNEL);
+	if (!wfilter)
+		goto err_filter;
+	wfilter->nr_filters = nr_filter;
+
+	q = wfilter->filters;
+	for (i = 0; i < filter.nr_filters; i++) {
+		if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG)
+			continue;
+
+		q->type			= tf[i].type;
+		q->info_filter		= tf[i].info_filter;
+		q->info_mask		= tf[i].info_mask;
+		q->subtype_filter[0]	= tf[i].subtype_filter[0];
+		__set_bit(q->type, wfilter->type_filter);
+		q++;
+	}
+
+	kfree(tf);
+set:
+	pipe_lock(pipe);
+	wfilter = rcu_replace_pointer(wqueue->filter, wfilter,
+				      lockdep_is_held(&pipe->mutex));
+	pipe_unlock(pipe);
+	if (wfilter)
+		kfree_rcu(wfilter, rcu);
+	return 0;
+
+err_filter:
+	kfree(tf);
+	return ret;
+}
+
+static void __put_watch_queue(struct kref *kref)
+{
+	struct watch_queue *wqueue =
+		container_of(kref, struct watch_queue, usage);
+	struct watch_filter *wfilter;
+	int i;
+
+	for (i = 0; i < wqueue->nr_pages; i++)
+		__free_page(wqueue->notes[i]);
+
+	wfilter = rcu_access_pointer(wqueue->filter);
+	if (wfilter)
+		kfree_rcu(wfilter, rcu);
+	kfree_rcu(wqueue, rcu);
+}
+
+/**
+ * put_watch_queue - Dispose of a ref on a watchqueue.
+ * @wqueue: The watch queue to unref.
+ */
+void put_watch_queue(struct watch_queue *wqueue)
+{
+	kref_put(&wqueue->usage, __put_watch_queue);
+}
+EXPORT_SYMBOL(put_watch_queue);
+
+static void free_watch(struct rcu_head *rcu)
+{
+	struct watch *watch = container_of(rcu, struct watch, rcu);
+
+	put_watch_queue(rcu_access_pointer(watch->queue));
+	put_cred(watch->cred);
+}
+
+static void __put_watch(struct kref *kref)
+{
+	struct watch *watch = container_of(kref, struct watch, usage);
+
+	call_rcu(&watch->rcu, free_watch);
+}
+
+/*
+ * Discard a watch.
+ */
+static void put_watch(struct watch *watch)
+{
+	kref_put(&watch->usage, __put_watch);
+}
+
+/**
+ * init_watch_queue - Initialise a watch
+ * @watch: The watch to initialise.
+ * @wqueue: The queue to assign.
+ *
+ * Initialise a watch and set the watch queue.
+ */
+void init_watch(struct watch *watch, struct watch_queue *wqueue)
+{
+	kref_init(&watch->usage);
+	INIT_HLIST_NODE(&watch->list_node);
+	INIT_HLIST_NODE(&watch->queue_node);
+	rcu_assign_pointer(watch->queue, wqueue);
+}
+
+/**
+ * add_watch_to_object - Add a watch on an object to a watch list
+ * @watch: The watch to add
+ * @wlist: The watch list to add to
+ *
+ * @watch->queue must have been set to point to the queue to post notifications
+ * to and the watch list of the object to be watched.  @watch->cred must also
+ * have been set to the appropriate credentials and a ref taken on them.
+ *
+ * The caller must pin the queue and the list both and must hold the list
+ * locked against racing watch additions/removals.
+ */
+int add_watch_to_object(struct watch *watch, struct watch_list *wlist)
+{
+	struct watch_queue *wqueue = rcu_access_pointer(watch->queue);
+	struct watch *w;
+
+	hlist_for_each_entry(w, &wlist->watchers, list_node) {
+		struct watch_queue *wq = rcu_access_pointer(w->queue);
+		if (wqueue == wq && watch->id == w->id)
+			return -EBUSY;
+	}
+
+	watch->cred = get_current_cred();
+	rcu_assign_pointer(watch->watch_list, wlist);
+
+	spin_lock_bh(&wqueue->lock);
+	kref_get(&wqueue->usage);
+	kref_get(&watch->usage);
+	hlist_add_head(&watch->queue_node, &wqueue->watches);
+	spin_unlock_bh(&wqueue->lock);
+
+	hlist_add_head(&watch->list_node, &wlist->watchers);
+	return 0;
+}
+EXPORT_SYMBOL(add_watch_to_object);
+
+/**
+ * remove_watch_from_object - Remove a watch or all watches from an object.
+ * @wlist: The watch list to remove from
+ * @wq: The watch queue of interest (ignored if @all is true)
+ * @id: The ID of the watch to remove (ignored if @all is true)
+ * @all: True to remove all objects
+ *
+ * Remove a specific watch or all watches from an object.  A notification is
+ * sent to the watcher to tell them that this happened.
+ */
+int remove_watch_from_object(struct watch_list *wlist, struct watch_queue *wq,
+			     u64 id, bool all)
+{
+	struct watch_notification_removal n;
+	struct watch_queue *wqueue;
+	struct watch *watch;
+	int ret = -EBADSLT;
+
+	rcu_read_lock();
+
+again:
+	spin_lock(&wlist->lock);
+	hlist_for_each_entry(watch, &wlist->watchers, list_node) {
+		if (all ||
+		    (watch->id == id && rcu_access_pointer(watch->queue) == wq))
+			goto found;
+	}
+	spin_unlock(&wlist->lock);
+	goto out;
+
+found:
+	ret = 0;
+	hlist_del_init_rcu(&watch->list_node);
+	rcu_assign_pointer(watch->watch_list, NULL);
+	spin_unlock(&wlist->lock);
+
+	/* We now own the reference on watch that used to belong to wlist. */
+
+	n.watch.type = WATCH_TYPE_META;
+	n.watch.subtype = WATCH_META_REMOVAL_NOTIFICATION;
+	n.watch.info = watch->info_id | watch_sizeof(n.watch);
+	n.id = id;
+	if (id != 0)
+		n.watch.info = watch->info_id | watch_sizeof(n);
+
+	wqueue = rcu_dereference(watch->queue);
+
+	/* We don't need the watch list lock for the next bit as RCU is
+	 * protecting *wqueue from deallocation.
+	 */
+	if (wqueue) {
+		post_one_notification(wqueue, &n.watch);
+
+		spin_lock_bh(&wqueue->lock);
+
+		if (!hlist_unhashed(&watch->queue_node)) {
+			hlist_del_init_rcu(&watch->queue_node);
+			put_watch(watch);
+		}
+
+		spin_unlock_bh(&wqueue->lock);
+	}
+
+	if (wlist->release_watch) {
+		void (*release_watch)(struct watch *);
+
+		release_watch = wlist->release_watch;
+		rcu_read_unlock();
+		(*release_watch)(watch);
+		rcu_read_lock();
+	}
+	put_watch(watch);
+
+	if (all && !hlist_empty(&wlist->watchers))
+		goto again;
+out:
+	rcu_read_unlock();
+	return ret;
+}
+EXPORT_SYMBOL(remove_watch_from_object);
+
+/*
+ * Remove all the watches that are contributory to a queue.  This has the
+ * potential to race with removal of the watches by the destruction of the
+ * objects being watched or with the distribution of notifications.
+ */
+void watch_queue_clear(struct watch_queue *wqueue)
+{
+	struct watch_list *wlist;
+	struct watch *watch;
+	bool release;
+
+	rcu_read_lock();
+	spin_lock_bh(&wqueue->lock);
+
+	/* Prevent new additions and prevent notifications from happening */
+	wqueue->defunct = true;
+
+	while (!hlist_empty(&wqueue->watches)) {
+		watch = hlist_entry(wqueue->watches.first, struct watch, queue_node);
+		hlist_del_init_rcu(&watch->queue_node);
+		/* We now own a ref on the watch. */
+		spin_unlock_bh(&wqueue->lock);
+
+		/* We can't do the next bit under the queue lock as we need to
+		 * get the list lock - which would cause a deadlock if someone
+		 * was removing from the opposite direction at the same time or
+		 * posting a notification.
+		 */
+		wlist = rcu_dereference(watch->watch_list);
+		if (wlist) {
+			void (*release_watch)(struct watch *);
+
+			spin_lock(&wlist->lock);
+
+			release = !hlist_unhashed(&watch->list_node);
+			if (release) {
+				hlist_del_init_rcu(&watch->list_node);
+				rcu_assign_pointer(watch->watch_list, NULL);
+
+				/* We now own a second ref on the watch. */
+			}
+
+			release_watch = wlist->release_watch;
+			spin_unlock(&wlist->lock);
+
+			if (release) {
+				if (release_watch) {
+					rcu_read_unlock();
+					/* This might need to call dput(), so
+					 * we have to drop all the locks.
+					 */
+					(*release_watch)(watch);
+					rcu_read_lock();
+				}
+				put_watch(watch);
+			}
+		}
+
+		put_watch(watch);
+		spin_lock_bh(&wqueue->lock);
+	}
+
+	spin_unlock_bh(&wqueue->lock);
+	rcu_read_unlock();
+}
+
+/**
+ * get_watch_queue - Get a watch queue from its file descriptor.
+ * @fd: The fd to query.
+ */
+struct watch_queue *get_watch_queue(int fd)
+{
+	struct pipe_inode_info *pipe;
+	struct watch_queue *wqueue = ERR_PTR(-EINVAL);
+	struct fd f;
+
+	f = fdget(fd);
+	if (f.file) {
+		pipe = get_pipe_info(f.file, false);
+		if (pipe && pipe->watch_queue) {
+			wqueue = pipe->watch_queue;
+			kref_get(&wqueue->usage);
+		}
+		fdput(f);
+	}
+
+	return wqueue;
+}
+EXPORT_SYMBOL(get_watch_queue);
+
+/*
+ * Initialise a watch queue
+ */
+int watch_queue_init(struct pipe_inode_info *pipe)
+{
+	struct watch_queue *wqueue;
+
+	wqueue = kzalloc(sizeof(*wqueue), GFP_KERNEL);
+	if (!wqueue)
+		return -ENOMEM;
+
+	wqueue->pipe = pipe;
+	kref_init(&wqueue->usage);
+	spin_lock_init(&wqueue->lock);
+	INIT_HLIST_HEAD(&wqueue->watches);
+
+	pipe->watch_queue = wqueue;
+	return 0;
+}
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index b6b1f54a7837..fa5aacbfd000 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -92,6 +92,26 @@ static int __init hardlockup_all_cpu_backtrace_setup(char *str)
 }
 __setup("hardlockup_all_cpu_backtrace=", hardlockup_all_cpu_backtrace_setup);
 # endif /* CONFIG_SMP */
+
+atomic_t hardlockup_detected = ATOMIC_INIT(0);
+
+static inline void flush_hardlockup_messages(void)
+{
+	static atomic_t flushed = ATOMIC_INIT(0);
+
+	/* flush messages from hard lockup detector */
+	if (atomic_read(&hardlockup_detected) != atomic_read(&flushed)) {
+		atomic_set(&flushed, atomic_read(&hardlockup_detected));
+		printk_safe_flush();
+	}
+}
+
+#else /* CONFIG_HARDLOCKUP_DETECTOR */
+
+static inline void flush_hardlockup_messages(void)
+{
+}
+
 #endif /* CONFIG_HARDLOCKUP_DETECTOR */
 
 /*
@@ -370,6 +390,8 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
 	/* kick the hardlockup detector */
 	watchdog_interrupt_count();
 
+	flush_hardlockup_messages();
+
 	/* kick the softlockup detector */
 	if (completion_done(this_cpu_ptr(&softlockup_completion))) {
 		reinit_completion(this_cpu_ptr(&softlockup_completion));
@@ -661,7 +683,7 @@ static void proc_watchdog_update(void)
  * proc_soft_watchdog | soft_watchdog_user_enabled | SOFT_WATCHDOG_ENABLED
  */
 static int proc_watchdog_common(int which, struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int err, old, *param = table->data;
 
@@ -688,7 +710,7 @@ static int proc_watchdog_common(int which, struct ctl_table *table, int write,
  * /proc/sys/kernel/watchdog
  */
 int proc_watchdog(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos)
+		  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	return proc_watchdog_common(NMI_WATCHDOG_ENABLED|SOFT_WATCHDOG_ENABLED,
 				    table, write, buffer, lenp, ppos);
@@ -698,7 +720,7 @@ int proc_watchdog(struct ctl_table *table, int write,
  * /proc/sys/kernel/nmi_watchdog
  */
 int proc_nmi_watchdog(struct ctl_table *table, int write,
-		      void __user *buffer, size_t *lenp, loff_t *ppos)
+		      void *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (!nmi_watchdog_available && write)
 		return -ENOTSUPP;
@@ -710,7 +732,7 @@ int proc_nmi_watchdog(struct ctl_table *table, int write,
  * /proc/sys/kernel/soft_watchdog
  */
 int proc_soft_watchdog(struct ctl_table *table, int write,
-			void __user *buffer, size_t *lenp, loff_t *ppos)
+			void *buffer, size_t *lenp, loff_t *ppos)
 {
 	return proc_watchdog_common(SOFT_WATCHDOG_ENABLED,
 				    table, write, buffer, lenp, ppos);
@@ -720,7 +742,7 @@ int proc_soft_watchdog(struct ctl_table *table, int write,
  * /proc/sys/kernel/watchdog_thresh
  */
 int proc_watchdog_thresh(struct ctl_table *table, int write,
-			 void __user *buffer, size_t *lenp, loff_t *ppos)
+			 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int err, old;
 
@@ -743,7 +765,7 @@ int proc_watchdog_thresh(struct ctl_table *table, int write,
  * been brought online, if desired.
  */
 int proc_watchdog_cpumask(struct ctl_table *table, int write,
-			  void __user *buffer, size_t *lenp, loff_t *ppos)
+			  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int err;
 
diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c
index 247bf0b1582c..a546bc54f6ff 100644
--- a/kernel/watchdog_hld.c
+++ b/kernel/watchdog_hld.c
@@ -154,6 +154,7 @@ static void watchdog_overflow_callback(struct perf_event *event,
 
 		if (hardlockup_panic)
 			nmi_panic(regs, "Hard LOCKUP");
+		atomic_inc(&hardlockup_detected);
 
 		__this_cpu_write(hard_watchdog_warn, true);
 		return;
diff --git a/lib/Kconfig b/lib/Kconfig
index 5d53f9609c25..77405d041a9f 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -80,6 +80,9 @@ config ARCH_USE_CMPXCHG_LOCKREF
 config ARCH_HAS_FAST_MULTIPLIER
 	bool
 
+config ARCH_USE_SYM_ANNOTATIONS
+	bool
+
 config INDIRECT_PIO
 	bool "Access I/O in non-MMIO mode"
 	depends on ARM64
@@ -427,7 +430,7 @@ config INTERVAL_TREE
 
 	  See:
 
-		Documentation/rbtree.txt
+		Documentation/core-api/rbtree.rst
 
 	  for more information.
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 21d9c5f6e7ec..8e4aded46281 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -99,6 +99,7 @@ config DYNAMIC_DEBUG
 	default n
 	depends on PRINTK
 	depends on (DEBUG_FS || PROC_FS)
+	select DYNAMIC_DEBUG_CORE
 	help
 
 	  Compiles debug level messages into the kernel, which would not
@@ -165,6 +166,17 @@ config DYNAMIC_DEBUG
 	  See Documentation/admin-guide/dynamic-debug-howto.rst for additional
 	  information.
 
+config DYNAMIC_DEBUG_CORE
+	bool "Enable core function of dynamic debug support"
+	depends on PRINTK
+	depends on (DEBUG_FS || PROC_FS)
+	help
+	  Enable core functional support of dynamic debug. It is useful
+	  when you want to tie dynamic debug to your kernel modules with
+	  DYNAMIC_DEBUG_MODULE defined for each of them, especially for
+	  the case of embedded system where the kernel image size is
+	  sensitive for people.
+
 config SYMBOLIC_ERRNAME
 	bool "Support symbolic error names in printf"
 	default y if PRINTK
@@ -369,6 +381,11 @@ config STACK_VALIDATION
 	  For more information, see
 	  tools/objtool/Documentation/stack-validation.txt.
 
+config VMLINUX_VALIDATION
+	bool
+	depends on STACK_VALIDATION && DEBUG_ENTRY && !PARAVIRT
+	default y
+
 config DEBUG_FORCE_WEAK_PER_CPU
 	bool "Force weak per-cpu definitions"
 	depends on DEBUG_KERNEL
@@ -653,6 +670,12 @@ config SCHED_STACK_END_CHECK
 	  data corruption or a sporadic crash at a later stage once the region
 	  is examined. The runtime overhead introduced is minimal.
 
+config ARCH_HAS_DEBUG_VM_PGTABLE
+	bool
+	help
+	  An architecture should select this when it can successfully
+	  build and run DEBUG_VM_PGTABLE.
+
 config DEBUG_VM
 	bool "Debug VM"
 	depends on DEBUG_KERNEL
@@ -688,6 +711,25 @@ config DEBUG_VM_PGFLAGS
 
 	  If unsure, say N.
 
+config DEBUG_VM_PGTABLE
+	bool "Debug arch page table for semantics compliance"
+	depends on MMU
+	depends on !IA64 && !ARM
+	depends on ARCH_HAS_DEBUG_VM_PGTABLE || EXPERT
+	default y if ARCH_HAS_DEBUG_VM_PGTABLE && DEBUG_VM
+	help
+	  This option provides a debug method which can be used to test
+	  architecture page table helper functions on various platforms in
+	  verifying if they comply with expected generic MM semantics. This
+	  will help architecture code in making sure that any changes or
+	  new additions of these helpers still conform to expected
+	  semantics of the generic MM. Platforms will have to opt in for
+	  this through ARCH_HAS_DEBUG_VM_PGTABLE. Although it can also be
+	  enabled through EXPERT without requiring code change. This test
+	  is disabled on IA64 and ARM platforms where it fails to build.
+
+	  If unsure, say N.
+
 config ARCH_HAS_DEBUG_VIRTUAL
 	bool
 
@@ -1514,6 +1556,8 @@ config PROVIDE_OHCI1394_DMA_INIT
 
 source "samples/Kconfig"
 
+source "lib/Kconfig.kcsan"
+
 config ARCH_HAS_DEVMEM_IS_ALLOWED
 	bool
 
@@ -1555,6 +1599,12 @@ config IO_STRICT_DEVMEM
 
 menu "$(SRCARCH) Debugging"
 
+config DEBUG_AID_FOR_SYZBOT
+       bool "Additional debug code for syzbot"
+       default n
+       help
+         This option is intended for testing by syzbot.
+
 source "arch/$(SRCARCH)/Kconfig.debug"
 
 endmenu
@@ -1769,6 +1819,15 @@ config KCOV_INSTRUMENT_ALL
 	  filesystem fuzzing with AFL) then you will want to enable coverage
 	  for more specific subsets of files, and should say n here.
 
+config KCOV_IRQ_AREA_SIZE
+	hex "Size of interrupt coverage collection area in words"
+	depends on KCOV
+	default 0x40000
+	help
+	  KCOV uses preallocated per-cpu areas to collect coverage from
+	  soft interrupts. This specifies the size of those areas in the
+	  number of unsigned long words.
+
 menuconfig RUNTIME_TESTING_MENU
 	bool "Runtime Testing"
 	def_bool y
@@ -2225,4 +2284,6 @@ config HYPERV_TESTING
 
 endmenu # "Kernel Testing and Coverage"
 
+source "lib/Kconfig.twist"
+
 endmenu # Kernel hacking
diff --git a/lib/Kconfig.kcsan b/lib/Kconfig.kcsan
new file mode 100644
index 000000000000..ea28245c6c1d
--- /dev/null
+++ b/lib/Kconfig.kcsan
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config HAVE_ARCH_KCSAN
+	bool
+
+menuconfig KCSAN
+	bool "KCSAN: dynamic data race detector"
+	depends on HAVE_ARCH_KCSAN && DEBUG_KERNEL && !KASAN
+	select STACKTRACE
+	help
+	  The Kernel Concurrency Sanitizer (KCSAN) is a dynamic
+	  data-race detector that relies on compile-time instrumentation.
+	  KCSAN uses a watchpoint-based sampling approach to detect races.
+
+	  While KCSAN's primary purpose is to detect data races, it
+	  also provides assertions to check data access constraints.
+	  These assertions can expose bugs that do not manifest as
+	  data races.
+
+	  See <file:Documentation/dev-tools/kcsan.rst> for more details.
+
+if KCSAN
+
+config KCSAN_VERBOSE
+	bool "Show verbose reports with more information about system state"
+	depends on PROVE_LOCKING
+	help
+	  If enabled, reports show more information about the system state that
+	  may help better analyze and debug races. This includes held locks and
+	  IRQ trace events.
+
+	  While this option should generally be benign, we call into more
+	  external functions on report generation; if a race report is
+	  generated from any one of them, system stability may suffer due to
+	  deadlocks or recursion.  If in doubt, say N.
+
+config KCSAN_DEBUG
+	bool "Debugging of KCSAN internals"
+
+config KCSAN_SELFTEST
+	bool "Perform short selftests on boot"
+	default y
+	help
+	  Run KCSAN selftests on boot. On test failure, causes the kernel to
+	  panic. Recommended to be enabled, ensuring critical functionality
+	  works as intended.
+
+config KCSAN_TEST
+	tristate "KCSAN test for integrated runtime behaviour"
+	depends on TRACEPOINTS && KUNIT
+	select TORTURE_TEST
+	help
+	  KCSAN test focusing on behaviour of the integrated runtime. Tests
+	  various race scenarios, and verifies the reports generated to
+	  console. Makes use of KUnit for test organization, and the Torture
+	  framework for test thread control.
+
+	  Each test case may run at least up to KCSAN_REPORT_ONCE_IN_MS
+	  milliseconds. Test run duration may be optimized by building the
+	  kernel and KCSAN test with KCSAN_REPORT_ONCE_IN_MS set to a lower
+	  than default value.
+
+	  Say Y here if you want the test to be built into the kernel and run
+	  during boot; say M if you want the test to build as a module; say N
+	  if you are unsure.
+
+config KCSAN_EARLY_ENABLE
+	bool "Early enable during boot"
+	default y
+	help
+	  If KCSAN should be enabled globally as soon as possible. KCSAN can
+	  later be enabled/disabled via debugfs.
+
+config KCSAN_NUM_WATCHPOINTS
+	int "Number of available watchpoints"
+	default 64
+	help
+	  Total number of available watchpoints. An address range maps into a
+	  specific watchpoint slot as specified in kernel/kcsan/encoding.h.
+	  Although larger number of watchpoints may not be usable due to
+	  limited number of CPUs, a larger value helps to improve performance
+	  due to reducing cache-line contention. The chosen default is a
+	  conservative value; we should almost never observe "no_capacity"
+	  events (see /sys/kernel/debug/kcsan).
+
+config KCSAN_UDELAY_TASK
+	int "Delay in microseconds (for tasks)"
+	default 80
+	help
+	  For tasks, the microsecond delay after setting up a watchpoint.
+
+config KCSAN_UDELAY_INTERRUPT
+	int "Delay in microseconds (for interrupts)"
+	default 20
+	help
+	  For interrupts, the microsecond delay after setting up a watchpoint.
+	  Interrupts have tighter latency requirements, and their delay should
+	  be lower than for tasks.
+
+config KCSAN_DELAY_RANDOMIZE
+	bool "Randomize above delays"
+	default y
+	help
+	  If delays should be randomized, where the maximum is KCSAN_UDELAY_*.
+	  If false, the chosen delays are always the KCSAN_UDELAY_* values
+	  as defined above.
+
+config KCSAN_SKIP_WATCH
+	int "Skip instructions before setting up watchpoint"
+	default 4000
+	help
+	  The number of per-CPU memory operations to skip, before another
+	  watchpoint is set up, i.e. one in KCSAN_WATCH_SKIP per-CPU
+	  memory operations are used to set up a watchpoint. A smaller value
+	  results in more aggressive race detection, whereas a larger value
+	  improves system performance at the cost of missing some races.
+
+config KCSAN_SKIP_WATCH_RANDOMIZE
+	bool "Randomize watchpoint instruction skip count"
+	default y
+	help
+	  If instruction skip count should be randomized, where the maximum is
+	  KCSAN_WATCH_SKIP. If false, the chosen value is always
+	  KCSAN_WATCH_SKIP.
+
+config KCSAN_INTERRUPT_WATCHER
+	bool "Interruptible watchers"
+	help
+	  If enabled, a task that set up a watchpoint may be interrupted while
+	  delayed. This option will allow KCSAN to detect races between
+	  interrupted tasks and other threads of execution on the same CPU.
+
+	  Currently disabled by default, because not all safe per-CPU access
+	  primitives and patterns may be accounted for, and therefore could
+	  result in false positives.
+
+config KCSAN_REPORT_ONCE_IN_MS
+	int "Duration in milliseconds, in which any given race is only reported once"
+	default 3000
+	help
+	  Any given race is only reported once in the defined time window.
+	  Different races may still generate reports within a duration that is
+	  smaller than the duration defined here. This allows rate limiting
+	  reporting to avoid flooding the console with reports.  Setting this
+	  to 0 disables rate limiting.
+
+# The main purpose of the below options is to control reported data races (e.g.
+# in fuzzer configs), and are not expected to be switched frequently by other
+# users. We could turn some of them into boot parameters, but given they should
+# not be switched normally, let's keep them here to simplify configuration.
+#
+# The defaults below are chosen to be very conservative, and may miss certain
+# bugs.
+
+config KCSAN_REPORT_RACE_UNKNOWN_ORIGIN
+	bool "Report races of unknown origin"
+	default y
+	help
+	  If KCSAN should report races where only one access is known, and the
+	  conflicting access is of unknown origin. This type of race is
+	  reported if it was only possible to infer a race due to a data value
+	  change while an access is being delayed on a watchpoint.
+
+config KCSAN_REPORT_VALUE_CHANGE_ONLY
+	bool "Only report races where watcher observed a data value change"
+	default y
+	help
+	  If enabled and a conflicting write is observed via a watchpoint, but
+	  the data value of the memory location was observed to remain
+	  unchanged, do not report the data race.
+
+config KCSAN_ASSUME_PLAIN_WRITES_ATOMIC
+	bool "Assume that plain aligned writes up to word size are atomic"
+	default y
+	help
+	  Assume that plain aligned writes up to word size are atomic by
+	  default, and also not subject to other unsafe compiler optimizations
+	  resulting in data races. This will cause KCSAN to not report data
+	  races due to conflicts where the only plain accesses are aligned
+	  writes up to word size: conflicts between marked reads and plain
+	  aligned writes up to word size will not be reported as data races;
+	  notice that data races between two conflicting plain aligned writes
+	  will also not be reported.
+
+config KCSAN_IGNORE_ATOMICS
+	bool "Do not instrument marked atomic accesses"
+	help
+	  Never instrument marked atomic accesses. This option can be used for
+	  additional filtering. Conflicting marked atomic reads and plain
+	  writes will never be reported as a data race, however, will cause
+	  plain reads and marked writes to result in "unknown origin" reports.
+	  If combined with CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN=n, data
+	  races where at least one access is marked atomic will never be
+	  reported.
+
+	  Similar to KCSAN_ASSUME_PLAIN_WRITES_ATOMIC, but including unaligned
+	  accesses, conflicting marked atomic reads and plain writes will not
+	  be reported as data races; however, unlike that option, data races
+	  due to two conflicting plain writes will be reported (aligned and
+	  unaligned, if CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n).
+
+endif # KCSAN
diff --git a/lib/Kconfig.twist b/lib/Kconfig.twist
new file mode 100644
index 000000000000..f20e0d003581
--- /dev/null
+++ b/lib/Kconfig.twist
@@ -0,0 +1,26 @@
+menuconfig TWIST_KERNEL_BEHAVIOR
+	bool "Twist kernel behavior"
+	help
+	  Saying Y here allows modifying kernel behavior via kernel
+	  config options which will become visible by selecting this
+	  config option. Since these kernel config options are intended
+	  for helping e.g. fuzz testing, behavior twisted by this kernel
+	  option might be unstable. Userspace applications should not
+	  count on this option being selected.
+
+if TWIST_KERNEL_BEHAVIOR
+
+config TWIST_FOR_SYZKALLER_TESTING
+       bool "Select all twist options suitable for syzkaller testing"
+       select TWIST_DISABLE_KBD_K_SPEC_HANDLER
+       help
+	 Say N unless you are building kernels for syzkaller's testing.
+
+config TWIST_DISABLE_KBD_K_SPEC_HANDLER
+       bool "Disable k_spec() function in drivers/tty/vt/keyboard.c"
+       help
+	 k_spec() function allows triggering e.g. Ctrl-Alt-Del event.
+	 Such event is annoying for fuzz testing which wants to test
+	 kernel code without rebooting the system.
+
+endif # TWIST_KERNEL_BEHAVIOR
diff --git a/lib/Makefile b/lib/Makefile
index 685aee60de1d..ddd269bd8622 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -25,6 +25,9 @@ KASAN_SANITIZE_string.o := n
 CFLAGS_string.o := $(call cc-option, -fno-stack-protector)
 endif
 
+# Used by KCSAN while enabled, avoid recursion.
+KCSAN_SANITIZE_random32.o := n
+
 lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 rbtree.o radix-tree.o timerqueue.o xarray.o \
 	 idr.o extable.o sha1.o irq_regs.o argv_split.o \
@@ -186,7 +189,7 @@ lib-$(CONFIG_GENERIC_BUG) += bug.o
 
 obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
 
-obj-$(CONFIG_DYNAMIC_DEBUG) += dynamic_debug.o
+obj-$(CONFIG_DYNAMIC_DEBUG_CORE) += dynamic_debug.o
 obj-$(CONFIG_SYMBOLIC_ERRNAME) += errname.o
 
 obj-$(CONFIG_NLATTR) += nlattr.o
@@ -292,6 +295,7 @@ endif
 
 UBSAN_SANITIZE_ubsan.o := n
 KASAN_SANITIZE_ubsan.o := n
+KCSAN_SANITIZE_ubsan.o := n
 CFLAGS_ubsan.o := $(call cc-option, -fno-stack-protector) $(DISABLE_STACKLEAK_PLUGIN)
 
 obj-$(CONFIG_SBITMAP) += sbitmap.o
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 89260aa342d6..21a7640c5eed 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -182,21 +182,22 @@ EXPORT_SYMBOL(__bitmap_shift_left);
  *
  * In pictures, example for a big-endian 32-bit architecture:
  *
- * @src:
- * 31                                   63
- * |                                    |
- * 10000000 11000001 11110010 00010101  10000000 11000001 01110010 00010101
- *                 |  |              |                                    |
- *                16  14             0                                   32
- *
- * if @cut is 3, and @first is 14, bits 14-16 in @src are cut and @dst is:
- *
- * 31                                   63
- * |                                    |
- * 10110000 00011000 00110010 00010101  00010000 00011000 00101110 01000010
- *                    |              |                                    |
- *                    14 (bit 17     0                                   32
- *                        from @src)
+ * The @src bitmap is::
+ *
+ *   31                                   63
+ *   |                                    |
+ *   10000000 11000001 11110010 00010101  10000000 11000001 01110010 00010101
+ *                   |  |              |                                    |
+ *                  16  14             0                                   32
+ *
+ * if @cut is 3, and @first is 14, bits 14-16 in @src are cut and @dst is::
+ *
+ *   31                                   63
+ *   |                                    |
+ *   10110000 00011000 00110010 00010101  00010000 00011000 00101110 01000010
+ *                      |              |                                    |
+ *                      14 (bit 17     0                                   32
+ *                          from @src)
  *
  * Note that @dst and @src might overlap partially or entirely.
  *
diff --git a/lib/cpumask.c b/lib/cpumask.c
index fb22fb266f93..2fecbcd8c160 100644
--- a/lib/cpumask.c
+++ b/lib/cpumask.c
@@ -6,6 +6,7 @@
 #include <linux/export.h>
 #include <linux/memblock.h>
 #include <linux/numa.h>
+#include <linux/spinlock.h>
 
 /**
  * cpumask_next - get the next cpu in a cpumask
@@ -192,18 +193,39 @@ void __init free_bootmem_cpumask_var(cpumask_var_t mask)
 }
 #endif
 
-/**
- * cpumask_local_spread - select the i'th cpu with local numa cpu's first
- * @i: index number
- * @node: local numa_node
- *
- * This function selects an online CPU according to a numa aware policy;
- * local cpus are returned first, followed by non-local ones, then it
- * wraps around.
- *
- * It's not very efficient, but useful for setup.
- */
-unsigned int cpumask_local_spread(unsigned int i, int node)
+static void calc_node_distance(int *node_dist, int node)
+{
+	int i;
+
+	for (i = 0; i < nr_node_ids; i++)
+		node_dist[i] = node_distance(node, i);
+}
+
+static int find_nearest_node(int *node_dist, bool *used)
+{
+	int i, min_dist = node_dist[0], node_id = -1;
+
+	/* Choose the first unused node to compare */
+	for (i = 0; i < nr_node_ids; i++) {
+		if (used[i] == 0) {
+			min_dist = node_dist[i];
+			node_id = i;
+			break;
+		}
+	}
+
+	/* Compare and return the nearest node */
+	for (i = 0; i < nr_node_ids; i++) {
+		if (node_dist[i] < min_dist && used[i] == 0) {
+			min_dist = node_dist[i];
+			node_id = i;
+		}
+	}
+
+	return node_id;
+}
+
+static unsigned int __cpumask_local_spread(unsigned int i, int node)
 {
 	int cpu;
 
@@ -231,6 +253,62 @@ unsigned int cpumask_local_spread(unsigned int i, int node)
 	}
 	BUG();
 }
+
+/**
+ * cpumask_local_spread - select the i'th cpu with local numa cpu's first
+ * @i: index number
+ * @node: local numa_node
+ *
+ * This function selects an online CPU according to a numa aware policy;
+ * local cpus are returned first, followed by the nearest non-local ones,
+ * then it wraps around.
+ *
+ * It's not very efficient, but useful for setup.
+ */
+unsigned int cpumask_local_spread(unsigned int i, int node)
+{
+	static DEFINE_SPINLOCK(spread_lock);
+	static int node_dist[MAX_NUMNODES];
+	static bool used[MAX_NUMNODES];
+	unsigned long flags;
+	int cpu, j, id;
+
+	/* Wrap: we always want a cpu. */
+	i %= num_online_cpus();
+
+	if (node == NUMA_NO_NODE) {
+		for_each_cpu(cpu, cpu_online_mask)
+			if (i-- == 0)
+				return cpu;
+	} else {
+		if (nr_node_ids > MAX_NUMNODES)
+			return __cpumask_local_spread(i, node);
+
+		spin_lock_irqsave(&spread_lock, flags);
+		memset(used, 0, nr_node_ids * sizeof(bool));
+		calc_node_distance(node_dist, node);
+		for (j = 0; j < nr_node_ids; j++) {
+			id = find_nearest_node(node_dist, used);
+			if (id < 0)
+				break;
+
+			for_each_cpu_and(cpu, cpumask_of_node(id),
+					 cpu_online_mask)
+				if (i-- == 0) {
+					spin_unlock_irqrestore(&spread_lock,
+							       flags);
+					return cpu;
+				}
+			used[id] = 1;
+		}
+		spin_unlock_irqrestore(&spread_lock, flags);
+
+		for_each_cpu(cpu, cpu_online_mask)
+			if (i-- == 0)
+				return cpu;
+	}
+	BUG();
+}
 EXPORT_SYMBOL(cpumask_local_spread);
 
 static DEFINE_PER_CPU(int, distribute_cpu_mask_prev);
diff --git a/lib/dump_stack.c b/lib/dump_stack.c
index 33ffbf308853..a00ee6eedc7c 100644
--- a/lib/dump_stack.c
+++ b/lib/dump_stack.c
@@ -74,7 +74,7 @@ void show_regs_print_info(const char *log_lvl)
 static void __dump_stack(void)
 {
 	dump_stack_print_info(KERN_DEFAULT);
-	show_stack(NULL, NULL);
+	show_stack(NULL, NULL, KERN_DEFAULT);
 }
 
 /**
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 8f199f403ab5..321437bbf87d 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -1032,8 +1032,13 @@ static int __init dynamic_debug_init(void)
 	int verbose_bytes = 0;
 
 	if (&__start___verbose == &__stop___verbose) {
-		pr_warn("_ddebug table is empty in a CONFIG_DYNAMIC_DEBUG build\n");
-		return 1;
+		if (IS_ENABLED(CONFIG_DYNAMIC_DEBUG)) {
+			pr_warn("_ddebug table is empty in a CONFIG_DYNAMIC_DEBUG build\n");
+			return 1;
+		}
+		pr_info("Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build\n");
+		ddebug_init_success = 1;
+		return 0;
 	}
 	iter = __start___verbose;
 	modname = iter->modname;
diff --git a/lib/idr.c b/lib/idr.c
index c2cf2c52bbde..4d2eef0259d2 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -470,6 +470,7 @@ int ida_alloc_range(struct ida *ida, unsigned int min, unsigned int max,
 	goto retry;
 nospc:
 	xas_unlock_irqrestore(&xas, flags);
+	kfree(alloc);
 	return -ENOSPC;
 }
 EXPORT_SYMBOL(ida_alloc_range);
diff --git a/lib/iov_iter.c b/lib/iov_iter.c
index 51595bf3af85..bf538c2bec77 100644
--- a/lib/iov_iter.c
+++ b/lib/iov_iter.c
@@ -8,6 +8,7 @@
 #include <linux/splice.h>
 #include <net/checksum.h>
 #include <linux/scatterlist.h>
+#include <linux/instrumented.h>
 
 #define PIPE_PARANOIA /* for now */
 
@@ -138,7 +139,7 @@
 static int copyout(void __user *to, const void *from, size_t n)
 {
 	if (access_ok(to, n)) {
-		kasan_check_read(from, n);
+		instrument_copy_to_user(to, from, n);
 		n = raw_copy_to_user(to, from, n);
 	}
 	return n;
@@ -147,7 +148,7 @@ static int copyout(void __user *to, const void *from, size_t n)
 static int copyin(void *to, const void __user *from, size_t n)
 {
 	if (access_ok(from, n)) {
-		kasan_check_write(to, n);
+		instrument_copy_from_user(to, from, n);
 		n = raw_copy_from_user(to, from, n);
 	}
 	return n;
@@ -639,7 +640,7 @@ EXPORT_SYMBOL(_copy_to_iter);
 static int copyout_mcsafe(void __user *to, const void *from, size_t n)
 {
 	if (access_ok(to, n)) {
-		kasan_check_read(from, n);
+		instrument_copy_to_user(to, from, n);
 		n = copy_to_user_mcsafe((__force void *) to, from, n);
 	}
 	return n;
diff --git a/lib/kobject.c b/lib/kobject.c
index 83198cb37d8d..65fa7bf70c57 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2006-2007 Greg Kroah-Hartman <greg@kroah.com>
  * Copyright (c) 2006-2007 Novell Inc.
  *
- * Please see the file Documentation/kobject.txt for critical information
+ * Please see the file Documentation/core-api/kobject.rst for critical information
  * about using the kobject interface.
  */
 
@@ -670,7 +670,7 @@ static void kobject_cleanup(struct kobject *kobj)
 		 kobject_name(kobj), kobj, __func__, kobj->parent);
 
 	if (t && !t->release)
-		pr_debug("kobject: '%s' (%p): does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.\n",
+		pr_debug("kobject: '%s' (%p): does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst.\n",
 			 kobject_name(kobj), kobj);
 
 	/* send "remove" if the caller did not do it but sent "add" */
diff --git a/lib/kunit/test.c b/lib/kunit/test.c
index 7a6430a7fca0..ccb2ffad8dcf 100644
--- a/lib/kunit/test.c
+++ b/lib/kunit/test.c
@@ -93,7 +93,7 @@ static void kunit_print_ok_not_ok(void *test_or_suite,
 	 * representation.
 	 */
 	if (suite)
-		pr_info("%s %zd - %s",
+		pr_info("%s %zd - %s\n",
 			kunit_status_to_string(is_ok),
 			test_number, description);
 	else
diff --git a/lib/math/prime_numbers.c b/lib/math/prime_numbers.c
index 052f5b727be7..d42cebf7407f 100644
--- a/lib/math/prime_numbers.c
+++ b/lib/math/prime_numbers.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-#define pr_fmt(fmt) "prime numbers: " fmt "\n"
+#define pr_fmt(fmt) "prime numbers: " fmt
 
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -253,7 +253,7 @@ static void dump_primes(void)
 
 	if (buf)
 		bitmap_print_to_pagebuf(true, buf, p->primes, p->sz);
-	pr_info("primes.{last=%lu, .sz=%lu, .primes[]=...x%lx} = %s",
+	pr_info("primes.{last=%lu, .sz=%lu, .primes[]=...x%lx} = %s\n",
 		p->last, p->sz, p->primes[BITS_TO_LONGS(p->sz) - 1], buf);
 
 	rcu_read_unlock();
@@ -273,7 +273,7 @@ static int selftest(unsigned long max)
 		bool fast = is_prime_number(x);
 
 		if (slow != fast) {
-			pr_err("inconsistent result for is-prime(%lu): slow=%s, fast=%s!",
+			pr_err("inconsistent result for is-prime(%lu): slow=%s, fast=%s!\n",
 			       x, slow ? "yes" : "no", fast ? "yes" : "no");
 			goto err;
 		}
@@ -282,14 +282,14 @@ static int selftest(unsigned long max)
 			continue;
 
 		if (next_prime_number(last) != x) {
-			pr_err("incorrect result for next-prime(%lu): expected %lu, got %lu",
+			pr_err("incorrect result for next-prime(%lu): expected %lu, got %lu\n",
 			       last, x, next_prime_number(last));
 			goto err;
 		}
 		last = x;
 	}
 
-	pr_info("selftest(%lu) passed, last prime was %lu", x, last);
+	pr_info("%s(%lu) passed, last prime was %lu\n", __func__, x, last);
 	return 0;
 
 err:
diff --git a/lib/strncpy_from_user.c b/lib/strncpy_from_user.c
index 706020b06617..16e78d0bb5d4 100644
--- a/lib/strncpy_from_user.c
+++ b/lib/strncpy_from_user.c
@@ -98,6 +98,7 @@ long strncpy_from_user(char *dst, const char __user *src, long count)
 {
 	unsigned long max_addr, src_addr;
 
+	might_fault();
 	if (unlikely(count <= 0))
 		return 0;
 
diff --git a/lib/test_firmware.c b/lib/test_firmware.c
index 0c7fbcf07ac5..9fee2b93a8d1 100644
--- a/lib/test_firmware.c
+++ b/lib/test_firmware.c
@@ -310,27 +310,13 @@ static int test_dev_config_update_bool(const char *buf, size_t size,
 	return ret;
 }
 
-static ssize_t
-test_dev_config_show_bool(char *buf,
-			  bool config)
+static ssize_t test_dev_config_show_bool(char *buf, bool val)
 {
-	bool val;
-
-	mutex_lock(&test_fw_mutex);
-	val = config;
-	mutex_unlock(&test_fw_mutex);
-
 	return snprintf(buf, PAGE_SIZE, "%d\n", val);
 }
 
-static ssize_t test_dev_config_show_int(char *buf, int cfg)
+static ssize_t test_dev_config_show_int(char *buf, int val)
 {
-	int val;
-
-	mutex_lock(&test_fw_mutex);
-	val = cfg;
-	mutex_unlock(&test_fw_mutex);
-
 	return snprintf(buf, PAGE_SIZE, "%d\n", val);
 }
 
@@ -354,14 +340,8 @@ static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
 	return size;
 }
 
-static ssize_t test_dev_config_show_u8(char *buf, u8 cfg)
+static ssize_t test_dev_config_show_u8(char *buf, u8 val)
 {
-	u8 val;
-
-	mutex_lock(&test_fw_mutex);
-	val = cfg;
-	mutex_unlock(&test_fw_mutex);
-
 	return snprintf(buf, PAGE_SIZE, "%u\n", val);
 }
 
diff --git a/lib/test_kasan.c b/lib/test_kasan.c
index e3087d90e00d..dc2c6a51d11a 100644
--- a/lib/test_kasan.c
+++ b/lib/test_kasan.c
@@ -23,6 +23,14 @@
 
 #include <asm/page.h>
 
+/*
+ * We assign some test results to these globals to make sure the tests
+ * are not eliminated as dead code.
+ */
+
+int kasan_int_result;
+void *kasan_ptr_result;
+
 /*
  * Note: test functions are marked noinline so that their names appear in
  * reports.
@@ -622,7 +630,7 @@ static noinline void __init kasan_memchr(void)
 	if (!ptr)
 		return;
 
-	memchr(ptr, '1', size + 1);
+	kasan_ptr_result = memchr(ptr, '1', size + 1);
 	kfree(ptr);
 }
 
@@ -638,7 +646,7 @@ static noinline void __init kasan_memcmp(void)
 		return;
 
 	memset(arr, 0, sizeof(arr));
-	memcmp(ptr, arr, size+1);
+	kasan_int_result = memcmp(ptr, arr, size + 1);
 	kfree(ptr);
 }
 
@@ -661,22 +669,22 @@ static noinline void __init kasan_strings(void)
 	 * will likely point to zeroed byte.
 	 */
 	ptr += 16;
-	strchr(ptr, '1');
+	kasan_ptr_result = strchr(ptr, '1');
 
 	pr_info("use-after-free in strrchr\n");
-	strrchr(ptr, '1');
+	kasan_ptr_result = strrchr(ptr, '1');
 
 	pr_info("use-after-free in strcmp\n");
-	strcmp(ptr, "2");
+	kasan_int_result = strcmp(ptr, "2");
 
 	pr_info("use-after-free in strncmp\n");
-	strncmp(ptr, "2", 1);
+	kasan_int_result = strncmp(ptr, "2", 1);
 
 	pr_info("use-after-free in strlen\n");
-	strlen(ptr);
+	kasan_int_result = strlen(ptr);
 
 	pr_info("use-after-free in strnlen\n");
-	strnlen(ptr, 1);
+	kasan_int_result = strnlen(ptr, 1);
 }
 
 static noinline void __init kasan_bitops(void)
@@ -743,11 +751,12 @@ static noinline void __init kasan_bitops(void)
 	__test_and_change_bit(BITS_PER_LONG + BITS_PER_BYTE, bits);
 
 	pr_info("out-of-bounds in test_bit\n");
-	(void)test_bit(BITS_PER_LONG + BITS_PER_BYTE, bits);
+	kasan_int_result = test_bit(BITS_PER_LONG + BITS_PER_BYTE, bits);
 
 #if defined(clear_bit_unlock_is_negative_byte)
 	pr_info("out-of-bounds in clear_bit_unlock_is_negative_byte\n");
-	clear_bit_unlock_is_negative_byte(BITS_PER_LONG + BITS_PER_BYTE, bits);
+	kasan_int_result = clear_bit_unlock_is_negative_byte(BITS_PER_LONG +
+		BITS_PER_BYTE, bits);
 #endif
 	kfree(bits);
 }
diff --git a/lib/test_lockup.c b/lib/test_lockup.c
index ea09ca335b21..419fbaceba73 100644
--- a/lib/test_lockup.c
+++ b/lib/test_lockup.c
@@ -142,7 +142,7 @@ module_param(reallocate_pages, bool, 0400);
 MODULE_PARM_DESC(reallocate_pages, "free and allocate pages between iterations");
 
 struct file *test_file;
-struct inode *test_inode;
+static struct inode *test_inode;
 static char test_file_path[256];
 module_param_string(file_path, test_file_path, sizeof(test_file_path), 0400);
 MODULE_PARM_DESC(file_path, "file path to test");
diff --git a/lib/test_sysctl.c b/lib/test_sysctl.c
index 566dad3f4196..84eaae22d3a6 100644
--- a/lib/test_sysctl.c
+++ b/lib/test_sysctl.c
@@ -44,6 +44,8 @@ struct test_sysctl_data {
 	int int_0002;
 	int int_0003[4];
 
+	int boot_int;
+
 	unsigned int uint_0001;
 
 	char string_0001[65];
@@ -61,6 +63,8 @@ static struct test_sysctl_data test_data = {
 	.int_0003[2] = 2,
 	.int_0003[3] = 3,
 
+	.boot_int = 0,
+
 	.uint_0001 = 314,
 
 	.string_0001 = "(none)",
@@ -91,6 +95,15 @@ static struct ctl_table test_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
+	{
+		.procname	= "boot_int",
+		.data		= &test_data.boot_int,
+		.maxlen		= sizeof(test_data.boot_int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+		.extra1		= SYSCTL_ZERO,
+		.extra2         = SYSCTL_ONE,
+	},
 	{
 		.procname	= "uint_0001",
 		.data		= &test_data.uint_0001,
diff --git a/lib/test_vmalloc.c b/lib/test_vmalloc.c
index 8bbefcaddfe8..ddc9685702b1 100644
--- a/lib/test_vmalloc.c
+++ b/lib/test_vmalloc.c
@@ -91,12 +91,8 @@ static int random_size_align_alloc_test(void)
 		 */
 		size = ((rnd % 10) + 1) * PAGE_SIZE;
 
-		ptr = __vmalloc_node_range(size, align,
-		   VMALLOC_START, VMALLOC_END,
-		   GFP_KERNEL | __GFP_ZERO,
-		   PAGE_KERNEL,
-		   0, 0, __builtin_return_address(0));
-
+		ptr = __vmalloc_node(size, align, GFP_KERNEL | __GFP_ZERO, 0,
+				__builtin_return_address(0));
 		if (!ptr)
 			return -1;
 
@@ -118,12 +114,8 @@ static int align_shift_alloc_test(void)
 	for (i = 0; i < BITS_PER_LONG; i++) {
 		align = ((unsigned long) 1) << i;
 
-		ptr = __vmalloc_node_range(PAGE_SIZE, align,
-			VMALLOC_START, VMALLOC_END,
-			GFP_KERNEL | __GFP_ZERO,
-			PAGE_KERNEL,
-			0, 0, __builtin_return_address(0));
-
+		ptr = __vmalloc_node(PAGE_SIZE, align, GFP_KERNEL|__GFP_ZERO, 0,
+				__builtin_return_address(0));
 		if (!ptr)
 			return -1;
 
@@ -139,13 +131,9 @@ static int fix_align_alloc_test(void)
 	int i;
 
 	for (i = 0; i < test_loop_count; i++) {
-		ptr = __vmalloc_node_range(5 * PAGE_SIZE,
-			THREAD_ALIGN << 1,
-			VMALLOC_START, VMALLOC_END,
-			GFP_KERNEL | __GFP_ZERO,
-			PAGE_KERNEL,
-			0, 0, __builtin_return_address(0));
-
+		ptr = __vmalloc_node(5 * PAGE_SIZE, THREAD_ALIGN << 1,
+				GFP_KERNEL | __GFP_ZERO, 0,
+				__builtin_return_address(0));
 		if (!ptr)
 			return -1;
 
diff --git a/lib/test_xarray.c b/lib/test_xarray.c
index d4f97925dbd8..a3910d59f790 100644
--- a/lib/test_xarray.c
+++ b/lib/test_xarray.c
@@ -393,6 +393,9 @@ static noinline void check_cmpxchg(struct xarray *xa)
 	XA_BUG_ON(xa, xa_cmpxchg(xa, 12345678, FIVE, LOTS, GFP_KERNEL) != FIVE);
 	XA_BUG_ON(xa, xa_cmpxchg(xa, 5, FIVE, NULL, GFP_KERNEL) != NULL);
 	XA_BUG_ON(xa, xa_cmpxchg(xa, 5, NULL, FIVE, GFP_KERNEL) != NULL);
+	XA_BUG_ON(xa, xa_insert(xa, 5, FIVE, GFP_KERNEL) != -EBUSY);
+	XA_BUG_ON(xa, xa_cmpxchg(xa, 5, FIVE, NULL, GFP_KERNEL) != FIVE);
+	XA_BUG_ON(xa, xa_insert(xa, 5, FIVE, GFP_KERNEL) == -EBUSY);
 	xa_erase_index(xa, 12345678);
 	xa_erase_index(xa, 5);
 	XA_BUG_ON(xa, !xa_empty(xa));
@@ -567,6 +570,20 @@ static noinline void check_multi_store_3(struct xarray *xa, unsigned long index,
 
 	xa_destroy(xa);
 }
+
+static noinline void check_multi_store_4(struct xarray *xa)
+{
+	XA_BUG_ON(xa, xa_marked(xa, XA_MARK_0));
+
+	xa_store_index(xa, 0, GFP_KERNEL);
+	xa_store_index(xa, 2, GFP_KERNEL);
+	xa_set_mark(xa, 0, XA_MARK_0);
+	xa_set_mark(xa, 2, XA_MARK_0);
+
+	xa_store_order(xa, 0, 2, NULL, GFP_KERNEL);
+	XA_BUG_ON(xa, xa_marked(xa, XA_MARK_0));
+	xa_destroy(xa);
+}
 #endif
 
 static noinline void check_multi_store(struct xarray *xa)
@@ -646,6 +663,9 @@ static noinline void check_multi_store(struct xarray *xa)
 		check_multi_store_3(xa, 0, i);
 		check_multi_store_3(xa, 1UL << i, i);
 	}
+	check_multi_store_4(xa);
+	xa_store_index(xa, 1000, GFP_KERNEL);
+	check_multi_store_4(xa);
 #endif
 }
 
diff --git a/lib/ubsan.c b/lib/ubsan.c
index f8c0ccf35f29..cb9af3f6b77e 100644
--- a/lib/ubsan.c
+++ b/lib/ubsan.c
@@ -189,7 +189,7 @@ static void handle_overflow(struct overflow_data *data, void *lhs,
 	ubsan_epilogue();
 }
 
-void __ubsan_handle_add_overflow(struct overflow_data *data,
+void __ubsan_handle_add_overflow(void *data,
 				void *lhs, void *rhs)
 {
 
@@ -197,23 +197,23 @@ void __ubsan_handle_add_overflow(struct overflow_data *data,
 }
 EXPORT_SYMBOL(__ubsan_handle_add_overflow);
 
-void __ubsan_handle_sub_overflow(struct overflow_data *data,
+void __ubsan_handle_sub_overflow(void *data,
 				void *lhs, void *rhs)
 {
 	handle_overflow(data, lhs, rhs, '-');
 }
 EXPORT_SYMBOL(__ubsan_handle_sub_overflow);
 
-void __ubsan_handle_mul_overflow(struct overflow_data *data,
+void __ubsan_handle_mul_overflow(void *data,
 				void *lhs, void *rhs)
 {
 	handle_overflow(data, lhs, rhs, '*');
 }
 EXPORT_SYMBOL(__ubsan_handle_mul_overflow);
 
-void __ubsan_handle_negate_overflow(struct overflow_data *data,
-				void *old_val)
+void __ubsan_handle_negate_overflow(void *_data, void *old_val)
 {
+	struct overflow_data *data = _data;
 	char old_val_str[VALUE_LENGTH];
 
 	if (suppress_report(&data->location))
@@ -231,9 +231,9 @@ void __ubsan_handle_negate_overflow(struct overflow_data *data,
 EXPORT_SYMBOL(__ubsan_handle_negate_overflow);
 
 
-void __ubsan_handle_divrem_overflow(struct overflow_data *data,
-				void *lhs, void *rhs)
+void __ubsan_handle_divrem_overflow(void *_data, void *lhs, void *rhs)
 {
+	struct overflow_data *data = _data;
 	char rhs_val_str[VALUE_LENGTH];
 
 	if (suppress_report(&data->location))
@@ -326,10 +326,9 @@ void __ubsan_handle_type_mismatch(struct type_mismatch_data *data,
 }
 EXPORT_SYMBOL(__ubsan_handle_type_mismatch);
 
-void __ubsan_handle_type_mismatch_v1(struct type_mismatch_data_v1 *data,
-				void *ptr)
+void __ubsan_handle_type_mismatch_v1(void *_data, void *ptr)
 {
-
+	struct type_mismatch_data_v1 *data = _data;
 	struct type_mismatch_data_common common_data = {
 		.location = &data->location,
 		.type = data->type,
@@ -341,8 +340,9 @@ void __ubsan_handle_type_mismatch_v1(struct type_mismatch_data_v1 *data,
 }
 EXPORT_SYMBOL(__ubsan_handle_type_mismatch_v1);
 
-void __ubsan_handle_out_of_bounds(struct out_of_bounds_data *data, void *index)
+void __ubsan_handle_out_of_bounds(void *_data, void *index)
 {
+	struct out_of_bounds_data *data = _data;
 	char index_str[VALUE_LENGTH];
 
 	if (suppress_report(&data->location))
@@ -357,9 +357,9 @@ void __ubsan_handle_out_of_bounds(struct out_of_bounds_data *data, void *index)
 }
 EXPORT_SYMBOL(__ubsan_handle_out_of_bounds);
 
-void __ubsan_handle_shift_out_of_bounds(struct shift_out_of_bounds_data *data,
-					void *lhs, void *rhs)
+void __ubsan_handle_shift_out_of_bounds(void *_data, void *lhs, void *rhs)
 {
+	struct shift_out_of_bounds_data *data = _data;
 	struct type_descriptor *rhs_type = data->rhs_type;
 	struct type_descriptor *lhs_type = data->lhs_type;
 	char rhs_str[VALUE_LENGTH];
@@ -399,8 +399,9 @@ void __ubsan_handle_shift_out_of_bounds(struct shift_out_of_bounds_data *data,
 EXPORT_SYMBOL(__ubsan_handle_shift_out_of_bounds);
 
 
-void __ubsan_handle_builtin_unreachable(struct unreachable_data *data)
+void __ubsan_handle_builtin_unreachable(void *_data)
 {
+	struct unreachable_data *data = _data;
 	ubsan_prologue(&data->location, "unreachable");
 	pr_err("calling __builtin_unreachable()\n");
 	ubsan_epilogue();
@@ -408,9 +409,9 @@ void __ubsan_handle_builtin_unreachable(struct unreachable_data *data)
 }
 EXPORT_SYMBOL(__ubsan_handle_builtin_unreachable);
 
-void __ubsan_handle_load_invalid_value(struct invalid_value_data *data,
-				void *val)
+void __ubsan_handle_load_invalid_value(void *_data, void *val)
 {
+	struct invalid_value_data *data = _data;
 	char val_str[VALUE_LENGTH];
 
 	if (suppress_report(&data->location))
diff --git a/lib/usercopy.c b/lib/usercopy.c
index cbb4d9ec00f2..4bb1c5e7a3eb 100644
--- a/lib/usercopy.c
+++ b/lib/usercopy.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <linux/uaccess.h>
 #include <linux/bitops.h>
+#include <linux/instrumented.h>
+#include <linux/uaccess.h>
 
 /* out-of-line parts */
 
@@ -10,7 +11,7 @@ unsigned long _copy_from_user(void *to, const void __user *from, unsigned long n
 	unsigned long res = n;
 	might_fault();
 	if (likely(access_ok(from, n))) {
-		kasan_check_write(to, n);
+		instrument_copy_from_user(to, from, n);
 		res = raw_copy_from_user(to, from, n);
 	}
 	if (unlikely(res))
@@ -25,7 +26,7 @@ unsigned long _copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	might_fault();
 	if (likely(access_ok(to, n))) {
-		kasan_check_read(from, n);
+		instrument_copy_to_user(to, from, n);
 		n = raw_copy_to_user(to, from, n);
 	}
 	return n;
diff --git a/lib/xarray.c b/lib/xarray.c
index e9e641d3c0c3..a75336666051 100644
--- a/lib/xarray.c
+++ b/lib/xarray.c
@@ -492,7 +492,6 @@ static void xas_delete_node(struct xa_state *xas)
 
 		if (!parent) {
 			xas->xa->xa_head = NULL;
-			xas->xa_node = XAS_BOUNDS;
 			return;
 		}
 
@@ -754,7 +753,7 @@ static void update_node(struct xa_state *xas, struct xa_node *node,
 }
 
 /**
- * xas_store() - Store this entry in the XArray.
+ * __xas_store() - Store this entry in the XArray without affecting the marks.
  * @xas: XArray operation state.
  * @entry: New entry.
  *
@@ -766,7 +765,7 @@ static void update_node(struct xa_state *xas, struct xa_node *node,
  *
  * Return: The old entry at this index.
  */
-void *xas_store(struct xa_state *xas, void *entry)
+void *__xas_store(struct xa_state *xas, void *entry)
 {
 	struct xa_node *node;
 	void __rcu **slot = &xas->xa->xa_head;
@@ -799,8 +798,6 @@ void *xas_store(struct xa_state *xas, void *entry)
 		if (xas->xa_sibs)
 			xas_squash_marks(xas);
 	}
-	if (!entry)
-		xas_init_marks(xas);
 
 	for (;;) {
 		/*
@@ -838,6 +835,29 @@ void *xas_store(struct xa_state *xas, void *entry)
 	update_node(xas, node, count, values);
 	return first;
 }
+EXPORT_SYMBOL_GPL(__xas_store);
+
+/**
+ * xas_store() - Store this entry in the XArray.
+ * @xas: XArray operation state.
+ * @entry: New entry.
+ *
+ * If @xas is operating on a multi-index entry, the entry returned by this
+ * function is essentially meaningless (it may be an internal entry or it
+ * may be %NULL, even if there are non-NULL entries at some of the indices
+ * covered by the range).  This is not a problem for any current users,
+ * and can be changed if needed.
+ *
+ * Return: The old entry at this index.
+ */
+void *xas_store(struct xa_state *xas, void *entry)
+{
+	void *curr = __xas_store(xas, entry);
+
+	if (!entry)
+		xas_init_marks(xas);
+	return curr;
+}
 EXPORT_SYMBOL_GPL(xas_store);
 
 /**
@@ -1162,6 +1182,7 @@ void *xas_find_marked(struct xa_state *xas, unsigned long max, xa_mark_t mark)
 		xas->xa_index = 1;
 		goto out;
 	} else if (xas_top(xas->xa_node)) {
+restart:
 		advance = false;
 		entry = xa_head(xas->xa);
 		xas->xa_node = NULL;
@@ -1208,8 +1229,14 @@ void *xas_find_marked(struct xa_state *xas, unsigned long max, xa_mark_t mark)
 		}
 
 		entry = xa_entry(xas->xa, xas->xa_node, xas->xa_offset);
-		if (!entry && !(xa_track_free(xas->xa) && mark == XA_FREE_MARK))
+		if (unlikely(!entry &&
+			     !(xa_track_free(xas->xa) &&
+			       mark == XA_FREE_MARK))) {
+			xas_advance(xas);
 			continue;
+		}
+		if (xa_is_retry(entry))
+			goto restart;
 		if (!xa_is_node(entry))
 			return entry;
 		xas->xa_node = xa_to_node(entry);
diff --git a/localversion-next b/localversion-next
new file mode 100644
index 000000000000..a828773ec46c
--- /dev/null
+++ b/localversion-next
@@ -0,0 +1 @@
+-next-20200430
diff --git a/mm/Kconfig b/mm/Kconfig
index c1acc34c1c35..db626b8d4fdb 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -126,9 +126,6 @@ config SPARSEMEM_VMEMMAP
 	  pfn_to_page and page_to_pfn operations.  This is the most
 	  efficient option when sufficient kernel resources are available.
 
-config HAVE_MEMBLOCK_NODE_MAP
-	bool
-
 config HAVE_MEMBLOCK_PHYS_MAP
 	bool
 
@@ -136,6 +133,9 @@ config HAVE_FAST_GUP
 	depends on MMU
 	bool
 
+# Don't discard allocated memory used to track "memory" and "reserved" memblocks
+# after early boot, so it can still be used to test for validity of memory.
+# Also, memblocks are updated with memory hot(un)plug.
 config ARCH_KEEP_MEMBLOCK
 	bool
 
@@ -705,9 +705,9 @@ config ZSMALLOC
 	  returned by an alloc().  This handle must be mapped in order to
 	  access the allocated space.
 
-config PGTABLE_MAPPING
+config ZSMALLOC_PGTABLE_MAPPING
 	bool "Use page table mapping to access object in zsmalloc"
-	depends on ZSMALLOC
+	depends on ZSMALLOC=y
 	help
 	  By default, zsmalloc uses a copy-based object mapping method to
 	  access allocations that span two pages. However, if a particular
diff --git a/mm/Kconfig.debug b/mm/Kconfig.debug
index 0271b22e063f..e19f94c6df90 100644
--- a/mm/Kconfig.debug
+++ b/mm/Kconfig.debug
@@ -118,6 +118,39 @@ config DEBUG_RODATA_TEST
     ---help---
       This option enables a testcase for the setting rodata read-only.
 
+config ARCH_HAS_DEBUG_WX
+	bool
+
+config DEBUG_WX
+	bool "Warn on W+X mappings at boot"
+	depends on ARCH_HAS_DEBUG_WX
+	select PTDUMP_CORE
+	help
+	  Generate a warning if any W+X mappings are found at boot.
+
+	  This is useful for discovering cases where the kernel is leaving W+X
+	  mappings after applying NX, as such mappings are a security risk.
+	  This check also includes UXN, which should be set on all kernel
+	  mappings.
+
+	  Look for a message in dmesg output like this:
+
+	    <arch>/mm: Checked W+X mappings: passed, no W+X pages found.
+
+	  or like this, if the check failed:
+
+	    <arch>/mm: Checked W+X mappings: failed, <N> W+X pages found.
+
+	  Note that even if the check fails, your kernel is possibly
+	  still fine, as W+X mappings are not a security hole in
+	  themselves, what they do is that they make the exploitation
+	  of other unfixed kernel bugs easier.
+
+	  There is no runtime or memory usage effect of this option
+	  once the kernel has booted up - it's a one time check.
+
+	  If in doubt, say "Y".
+
 config GENERIC_PTDUMP
 	bool
 
diff --git a/mm/Makefile b/mm/Makefile
index fccd3756b25f..6e9d46b2efc9 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -8,6 +8,14 @@ KASAN_SANITIZE_slab.o := n
 KASAN_SANITIZE_slub.o := n
 KCSAN_SANITIZE_kmemleak.o := n
 
+# These produce frequent data race reports: most of them are due to races on
+# the same word but accesses to different bits of that word. Re-enable KCSAN
+# for these when we have more consensus on what to do about them.
+KCSAN_SANITIZE_slab_common.o := n
+KCSAN_SANITIZE_slab.o := n
+KCSAN_SANITIZE_slub.o := n
+KCSAN_SANITIZE_page_alloc.o := n
+
 # These files are disabled because they produce non-interesting and/or
 # flaky coverage that is not a function of syscall inputs. E.g. slab is out of
 # free pages, or a task is migrated between nodes.
@@ -41,7 +49,7 @@ obj-y			:= filemap.o mempool.o oom_kill.o fadvise.o \
 			   maccess.o page-writeback.o \
 			   readahead.o swap.o truncate.o vmscan.o shmem.o \
 			   util.o mmzone.o vmstat.o backing-dev.o \
-			   mm_init.o mmu_context.o percpu.o slab_common.o \
+			   mm_init.o percpu.o slab_common.o \
 			   compaction.o vmacache.o \
 			   interval_tree.o list_lru.o workingset.o \
 			   debug.o gup.o $(mmu-y)
@@ -88,6 +96,7 @@ obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o
 obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o
 obj-$(CONFIG_DEBUG_KMEMLEAK_TEST) += kmemleak-test.o
 obj-$(CONFIG_DEBUG_RODATA_TEST) += rodata_test.o
+obj-$(CONFIG_DEBUG_VM_PGTABLE) += debug_vm_pgtable.o
 obj-$(CONFIG_PAGE_OWNER) += page_owner.o
 obj-$(CONFIG_CLEANCACHE) += cleancache.o
 obj-$(CONFIG_MEMORY_ISOLATION) += page_isolation.o
diff --git a/mm/compaction.c b/mm/compaction.c
index 46f0fcc93081..fb43e731ac31 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -1401,7 +1401,7 @@ fast_isolate_freepages(struct compact_control *cc)
 		if (scan_start) {
 			/*
 			 * Use the highest PFN found above min. If one was
-			 * not found, be pessemistic for direct compaction
+			 * not found, be pessimistic for direct compaction
 			 * and use the min mark.
 			 */
 			if (highest) {
@@ -1966,7 +1966,7 @@ static enum compact_result compact_finished(struct compact_control *cc)
  */
 static enum compact_result __compaction_suitable(struct zone *zone, int order,
 					unsigned int alloc_flags,
-					int classzone_idx,
+					int highest_zoneidx,
 					unsigned long wmark_target)
 {
 	unsigned long watermark;
@@ -1979,7 +1979,7 @@ static enum compact_result __compaction_suitable(struct zone *zone, int order,
 	 * If watermarks for high-order allocation are already met, there
 	 * should be no need for compaction at all.
 	 */
-	if (zone_watermark_ok(zone, order, watermark, classzone_idx,
+	if (zone_watermark_ok(zone, order, watermark, highest_zoneidx,
 								alloc_flags))
 		return COMPACT_SUCCESS;
 
@@ -1989,9 +1989,9 @@ static enum compact_result __compaction_suitable(struct zone *zone, int order,
 	 * watermark and alloc_flags have to match, or be more pessimistic than
 	 * the check in __isolate_free_page(). We don't use the direct
 	 * compactor's alloc_flags, as they are not relevant for freepage
-	 * isolation. We however do use the direct compactor's classzone_idx to
-	 * skip over zones where lowmem reserves would prevent allocation even
-	 * if compaction succeeds.
+	 * isolation. We however do use the direct compactor's highest_zoneidx
+	 * to skip over zones where lowmem reserves would prevent allocation
+	 * even if compaction succeeds.
 	 * For costly orders, we require low watermark instead of min for
 	 * compaction to proceed to increase its chances.
 	 * ALLOC_CMA is used, as pages in CMA pageblocks are considered
@@ -2000,7 +2000,7 @@ static enum compact_result __compaction_suitable(struct zone *zone, int order,
 	watermark = (order > PAGE_ALLOC_COSTLY_ORDER) ?
 				low_wmark_pages(zone) : min_wmark_pages(zone);
 	watermark += compact_gap(order);
-	if (!__zone_watermark_ok(zone, 0, watermark, classzone_idx,
+	if (!__zone_watermark_ok(zone, 0, watermark, highest_zoneidx,
 						ALLOC_CMA, wmark_target))
 		return COMPACT_SKIPPED;
 
@@ -2009,12 +2009,12 @@ static enum compact_result __compaction_suitable(struct zone *zone, int order,
 
 enum compact_result compaction_suitable(struct zone *zone, int order,
 					unsigned int alloc_flags,
-					int classzone_idx)
+					int highest_zoneidx)
 {
 	enum compact_result ret;
 	int fragindex;
 
-	ret = __compaction_suitable(zone, order, alloc_flags, classzone_idx,
+	ret = __compaction_suitable(zone, order, alloc_flags, highest_zoneidx,
 				    zone_page_state(zone, NR_FREE_PAGES));
 	/*
 	 * fragmentation index determines if allocation failures are due to
@@ -2055,8 +2055,8 @@ bool compaction_zonelist_suitable(struct alloc_context *ac, int order,
 	 * Make sure at least one zone would pass __compaction_suitable if we continue
 	 * retrying the reclaim.
 	 */
-	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist, ac->high_zoneidx,
-					ac->nodemask) {
+	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist,
+				ac->highest_zoneidx, ac->nodemask) {
 		unsigned long available;
 		enum compact_result compact_result;
 
@@ -2069,7 +2069,7 @@ bool compaction_zonelist_suitable(struct alloc_context *ac, int order,
 		available = zone_reclaimable_pages(zone) / order;
 		available += zone_page_state_snapshot(zone, NR_FREE_PAGES);
 		compact_result = __compaction_suitable(zone, order, alloc_flags,
-				ac_classzone_idx(ac), available);
+				ac->highest_zoneidx, available);
 		if (compact_result != COMPACT_SKIPPED)
 			return true;
 	}
@@ -2098,9 +2098,9 @@ compact_zone(struct compact_control *cc, struct capture_control *capc)
 	INIT_LIST_HEAD(&cc->freepages);
 	INIT_LIST_HEAD(&cc->migratepages);
 
-	cc->migratetype = gfpflags_to_migratetype(cc->gfp_mask);
+	cc->migratetype = gfp_migratetype(cc->gfp_mask);
 	ret = compaction_suitable(cc->zone, cc->order, cc->alloc_flags,
-							cc->classzone_idx);
+							cc->highest_zoneidx);
 	/* Compaction is likely to fail */
 	if (ret == COMPACT_SUCCESS || ret == COMPACT_SKIPPED)
 		return ret;
@@ -2295,7 +2295,7 @@ compact_zone(struct compact_control *cc, struct capture_control *capc)
 
 static enum compact_result compact_zone_order(struct zone *zone, int order,
 		gfp_t gfp_mask, enum compact_priority prio,
-		unsigned int alloc_flags, int classzone_idx,
+		unsigned int alloc_flags, int highest_zoneidx,
 		struct page **capture)
 {
 	enum compact_result ret;
@@ -2307,7 +2307,7 @@ static enum compact_result compact_zone_order(struct zone *zone, int order,
 		.mode = (prio == COMPACT_PRIO_ASYNC) ?
 					MIGRATE_ASYNC :	MIGRATE_SYNC_LIGHT,
 		.alloc_flags = alloc_flags,
-		.classzone_idx = classzone_idx,
+		.highest_zoneidx = highest_zoneidx,
 		.direct_compaction = true,
 		.whole_zone = (prio == MIN_COMPACT_PRIORITY),
 		.ignore_skip_hint = (prio == MIN_COMPACT_PRIORITY),
@@ -2363,8 +2363,8 @@ enum compact_result try_to_compact_pages(gfp_t gfp_mask, unsigned int order,
 	trace_mm_compaction_try_to_compact_pages(order, gfp_mask, prio);
 
 	/* Compact each zone in the list */
-	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist, ac->high_zoneidx,
-								ac->nodemask) {
+	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist,
+					ac->highest_zoneidx, ac->nodemask) {
 		enum compact_result status;
 
 		if (prio > MIN_COMPACT_PRIORITY
@@ -2374,7 +2374,7 @@ enum compact_result try_to_compact_pages(gfp_t gfp_mask, unsigned int order,
 		}
 
 		status = compact_zone_order(zone, order, gfp_mask, prio,
-				alloc_flags, ac_classzone_idx(ac), capture);
+				alloc_flags, ac->highest_zoneidx, capture);
 		rc = max(status, rc);
 
 		/* The allocation should succeed, stop compacting */
@@ -2463,7 +2463,7 @@ int sysctl_compact_memory;
  * /proc/sys/vm/compact_memory
  */
 int sysctl_compaction_handler(struct ctl_table *table, int write,
-			void __user *buffer, size_t *length, loff_t *ppos)
+			void *buffer, size_t *length, loff_t *ppos)
 {
 	if (write)
 		compact_nodes();
@@ -2509,16 +2509,16 @@ static bool kcompactd_node_suitable(pg_data_t *pgdat)
 {
 	int zoneid;
 	struct zone *zone;
-	enum zone_type classzone_idx = pgdat->kcompactd_classzone_idx;
+	enum zone_type highest_zoneidx = pgdat->kcompactd_highest_zoneidx;
 
-	for (zoneid = 0; zoneid <= classzone_idx; zoneid++) {
+	for (zoneid = 0; zoneid <= highest_zoneidx; zoneid++) {
 		zone = &pgdat->node_zones[zoneid];
 
 		if (!populated_zone(zone))
 			continue;
 
 		if (compaction_suitable(zone, pgdat->kcompactd_max_order, 0,
-					classzone_idx) == COMPACT_CONTINUE)
+					highest_zoneidx) == COMPACT_CONTINUE)
 			return true;
 	}
 
@@ -2536,16 +2536,16 @@ static void kcompactd_do_work(pg_data_t *pgdat)
 	struct compact_control cc = {
 		.order = pgdat->kcompactd_max_order,
 		.search_order = pgdat->kcompactd_max_order,
-		.classzone_idx = pgdat->kcompactd_classzone_idx,
+		.highest_zoneidx = pgdat->kcompactd_highest_zoneidx,
 		.mode = MIGRATE_SYNC_LIGHT,
 		.ignore_skip_hint = false,
 		.gfp_mask = GFP_KERNEL,
 	};
 	trace_mm_compaction_kcompactd_wake(pgdat->node_id, cc.order,
-							cc.classzone_idx);
+							cc.highest_zoneidx);
 	count_compact_event(KCOMPACTD_WAKE);
 
-	for (zoneid = 0; zoneid <= cc.classzone_idx; zoneid++) {
+	for (zoneid = 0; zoneid <= cc.highest_zoneidx; zoneid++) {
 		int status;
 
 		zone = &pgdat->node_zones[zoneid];
@@ -2594,16 +2594,16 @@ static void kcompactd_do_work(pg_data_t *pgdat)
 
 	/*
 	 * Regardless of success, we are done until woken up next. But remember
-	 * the requested order/classzone_idx in case it was higher/tighter than
-	 * our current ones
+	 * the requested order/highest_zoneidx in case it was higher/tighter
+	 * than our current ones
 	 */
 	if (pgdat->kcompactd_max_order <= cc.order)
 		pgdat->kcompactd_max_order = 0;
-	if (pgdat->kcompactd_classzone_idx >= cc.classzone_idx)
-		pgdat->kcompactd_classzone_idx = pgdat->nr_zones - 1;
+	if (pgdat->kcompactd_highest_zoneidx >= cc.highest_zoneidx)
+		pgdat->kcompactd_highest_zoneidx = pgdat->nr_zones - 1;
 }
 
-void wakeup_kcompactd(pg_data_t *pgdat, int order, int classzone_idx)
+void wakeup_kcompactd(pg_data_t *pgdat, int order, int highest_zoneidx)
 {
 	if (!order)
 		return;
@@ -2611,8 +2611,8 @@ void wakeup_kcompactd(pg_data_t *pgdat, int order, int classzone_idx)
 	if (pgdat->kcompactd_max_order < order)
 		pgdat->kcompactd_max_order = order;
 
-	if (pgdat->kcompactd_classzone_idx > classzone_idx)
-		pgdat->kcompactd_classzone_idx = classzone_idx;
+	if (pgdat->kcompactd_highest_zoneidx > highest_zoneidx)
+		pgdat->kcompactd_highest_zoneidx = highest_zoneidx;
 
 	/*
 	 * Pairs with implicit barrier in wait_event_freezable()
@@ -2625,7 +2625,7 @@ void wakeup_kcompactd(pg_data_t *pgdat, int order, int classzone_idx)
 		return;
 
 	trace_mm_compaction_wakeup_kcompactd(pgdat->node_id, order,
-							classzone_idx);
+							highest_zoneidx);
 	wake_up_interruptible(&pgdat->kcompactd_wait);
 }
 
@@ -2646,7 +2646,7 @@ static int kcompactd(void *p)
 	set_freezable();
 
 	pgdat->kcompactd_max_order = 0;
-	pgdat->kcompactd_classzone_idx = pgdat->nr_zones - 1;
+	pgdat->kcompactd_highest_zoneidx = pgdat->nr_zones - 1;
 
 	while (!kthread_should_stop()) {
 		unsigned long pflags;
diff --git a/mm/debug.c b/mm/debug.c
index 2189357f0987..f2ede2df585a 100644
--- a/mm/debug.c
+++ b/mm/debug.c
@@ -110,13 +110,57 @@ void __dump_page(struct page *page, const char *reason)
 	else if (PageAnon(page))
 		type = "anon ";
 	else if (mapping) {
-		if (mapping->host && mapping->host->i_dentry.first) {
-			struct dentry *dentry;
-			dentry = container_of(mapping->host->i_dentry.first, struct dentry, d_u.d_alias);
-			pr_warn("%ps name:\"%pd\"\n", mapping->a_ops, dentry);
-		} else
-			pr_warn("%ps\n", mapping->a_ops);
+		const struct inode *host;
+		const struct address_space_operations *a_ops;
+		const struct hlist_node *dentry_first;
+		const struct dentry *dentry_ptr;
+		struct dentry dentry;
+
+		/*
+		 * mapping can be invalid pointer and we don't want to crash
+		 * accessing it, so probe everything depending on it carefully
+		 */
+		if (probe_kernel_read_strict(&host, &mapping->host,
+						sizeof(struct inode *)) ||
+		    probe_kernel_read_strict(&a_ops, &mapping->a_ops,
+				sizeof(struct address_space_operations *))) {
+			pr_warn("failed to read mapping->host or a_ops, mapping not a valid kernel address?\n");
+			goto out_mapping;
+		}
+
+		if (!host) {
+			pr_warn("mapping->a_ops:%ps\n", a_ops);
+			goto out_mapping;
+		}
+
+		if (probe_kernel_read_strict(&dentry_first,
+			&host->i_dentry.first, sizeof(struct hlist_node *))) {
+			pr_warn("mapping->a_ops:%ps with invalid mapping->host inode address %px\n",
+				a_ops, host);
+			goto out_mapping;
+		}
+
+		if (!dentry_first) {
+			pr_warn("mapping->a_ops:%ps\n", a_ops);
+			goto out_mapping;
+		}
+
+		dentry_ptr = container_of(dentry_first, struct dentry, d_u.d_alias);
+		if (probe_kernel_read_strict(&dentry, dentry_ptr,
+							sizeof(struct dentry))) {
+			pr_warn("mapping->aops:%ps with invalid mapping->host->i_dentry.first %px\n",
+				a_ops, dentry_ptr);
+		} else {
+			/*
+			 * if dentry is corrupted, the %pd handler may still
+			 * crash, but it's unlikely that we reach here with a
+			 * corrupted struct page
+			 */
+			pr_warn("mapping->aops:%ps dentry name:\"%pd\"\n",
+								a_ops, &dentry);
+		}
 	}
+out_mapping:
 	BUILD_BUG_ON(ARRAY_SIZE(pageflag_names) != __NR_PAGEFLAGS + 1);
 
 	pr_warn("%sflags: %#lx(%pGp)%s\n", type, page->flags, &page->flags,
diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c
new file mode 100644
index 000000000000..188c18908964
--- /dev/null
+++ b/mm/debug_vm_pgtable.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This kernel test validates architecture page table helpers and
+ * accessors and helps in verifying their continued compliance with
+ * expected generic MM semantics.
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ *
+ * Author: Anshuman Khandual <anshuman.khandual@arm.com>
+ */
+#define pr_fmt(fmt) "debug_vm_pgtable: %s: " fmt, __func__
+
+#include <linux/gfp.h>
+#include <linux/highmem.h>
+#include <linux/hugetlb.h>
+#include <linux/kernel.h>
+#include <linux/kconfig.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/mm_types.h>
+#include <linux/module.h>
+#include <linux/pfn_t.h>
+#include <linux/printk.h>
+#include <linux/random.h>
+#include <linux/spinlock.h>
+#include <linux/swap.h>
+#include <linux/swapops.h>
+#include <linux/start_kernel.h>
+#include <linux/sched/mm.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+
+#define VMFLAGS	(VM_READ|VM_WRITE|VM_EXEC)
+
+/*
+ * On s390 platform, the lower 4 bits are used to identify given page table
+ * entry type. But these bits might affect the ability to clear entries with
+ * pxx_clear() because of how dynamic page table folding works on s390. So
+ * while loading up the entries do not change the lower 4 bits. It does not
+ * have affect any other platform.
+ */
+#define S390_MASK_BITS	4
+#define RANDOM_ORVALUE	GENMASK(BITS_PER_LONG - 1, S390_MASK_BITS)
+#define RANDOM_NZVALUE	GENMASK(7, 0)
+
+static void __init pte_basic_tests(unsigned long pfn, pgprot_t prot)
+{
+	pte_t pte = pfn_pte(pfn, prot);
+
+	WARN_ON(!pte_same(pte, pte));
+	WARN_ON(!pte_young(pte_mkyoung(pte_mkold(pte))));
+	WARN_ON(!pte_dirty(pte_mkdirty(pte_mkclean(pte))));
+	WARN_ON(!pte_write(pte_mkwrite(pte_wrprotect(pte))));
+	WARN_ON(pte_young(pte_mkold(pte_mkyoung(pte))));
+	WARN_ON(pte_dirty(pte_mkclean(pte_mkdirty(pte))));
+	WARN_ON(pte_write(pte_wrprotect(pte_mkwrite(pte))));
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static void __init pmd_basic_tests(unsigned long pfn, pgprot_t prot)
+{
+	pmd_t pmd = pfn_pmd(pfn, prot);
+
+	WARN_ON(!pmd_same(pmd, pmd));
+	WARN_ON(!pmd_young(pmd_mkyoung(pmd_mkold(pmd))));
+	WARN_ON(!pmd_dirty(pmd_mkdirty(pmd_mkclean(pmd))));
+	WARN_ON(!pmd_write(pmd_mkwrite(pmd_wrprotect(pmd))));
+	WARN_ON(pmd_young(pmd_mkold(pmd_mkyoung(pmd))));
+	WARN_ON(pmd_dirty(pmd_mkclean(pmd_mkdirty(pmd))));
+	WARN_ON(pmd_write(pmd_wrprotect(pmd_mkwrite(pmd))));
+	/*
+	 * A huge page does not point to next level page table
+	 * entry. Hence this must qualify as pmd_bad().
+	 */
+	WARN_ON(!pmd_bad(pmd_mkhuge(pmd)));
+}
+
+#ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
+static void __init pud_basic_tests(unsigned long pfn, pgprot_t prot)
+{
+	pud_t pud = pfn_pud(pfn, prot);
+
+	WARN_ON(!pud_same(pud, pud));
+	WARN_ON(!pud_young(pud_mkyoung(pud_mkold(pud))));
+	WARN_ON(!pud_write(pud_mkwrite(pud_wrprotect(pud))));
+	WARN_ON(pud_write(pud_wrprotect(pud_mkwrite(pud))));
+	WARN_ON(pud_young(pud_mkold(pud_mkyoung(pud))));
+
+	if (mm_pmd_folded(mm))
+		return;
+
+	/*
+	 * A huge page does not point to next level page table
+	 * entry. Hence this must qualify as pud_bad().
+	 */
+	WARN_ON(!pud_bad(pud_mkhuge(pud)));
+}
+#else  /* !CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD */
+static void __init pud_basic_tests(unsigned long pfn, pgprot_t prot) { }
+#endif /* CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD */
+#else  /* !CONFIG_TRANSPARENT_HUGEPAGE */
+static void __init pmd_basic_tests(unsigned long pfn, pgprot_t prot) { }
+static void __init pud_basic_tests(unsigned long pfn, pgprot_t prot) { }
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+static void __init p4d_basic_tests(unsigned long pfn, pgprot_t prot)
+{
+	p4d_t p4d;
+
+	memset(&p4d, RANDOM_NZVALUE, sizeof(p4d_t));
+	WARN_ON(!p4d_same(p4d, p4d));
+}
+
+static void __init pgd_basic_tests(unsigned long pfn, pgprot_t prot)
+{
+	pgd_t pgd;
+
+	memset(&pgd, RANDOM_NZVALUE, sizeof(pgd_t));
+	WARN_ON(!pgd_same(pgd, pgd));
+}
+
+#ifndef __PAGETABLE_PUD_FOLDED
+static void __init pud_clear_tests(struct mm_struct *mm, pud_t *pudp)
+{
+	pud_t pud = READ_ONCE(*pudp);
+
+	if (mm_pmd_folded(mm))
+		return;
+
+	pud = __pud(pud_val(pud) | RANDOM_ORVALUE);
+	WRITE_ONCE(*pudp, pud);
+	pud_clear(pudp);
+	pud = READ_ONCE(*pudp);
+	WARN_ON(!pud_none(pud));
+}
+
+static void __init pud_populate_tests(struct mm_struct *mm, pud_t *pudp,
+				      pmd_t *pmdp)
+{
+	pud_t pud;
+
+	if (mm_pmd_folded(mm))
+		return;
+	/*
+	 * This entry points to next level page table page.
+	 * Hence this must not qualify as pud_bad().
+	 */
+	pmd_clear(pmdp);
+	pud_clear(pudp);
+	pud_populate(mm, pudp, pmdp);
+	pud = READ_ONCE(*pudp);
+	WARN_ON(pud_bad(pud));
+}
+#else  /* !__PAGETABLE_PUD_FOLDED */
+static void __init pud_clear_tests(struct mm_struct *mm, pud_t *pudp) { }
+static void __init pud_populate_tests(struct mm_struct *mm, pud_t *pudp,
+				      pmd_t *pmdp)
+{
+}
+#endif /* PAGETABLE_PUD_FOLDED */
+
+#ifndef __PAGETABLE_P4D_FOLDED
+static void __init p4d_clear_tests(struct mm_struct *mm, p4d_t *p4dp)
+{
+	p4d_t p4d = READ_ONCE(*p4dp);
+
+	if (mm_pud_folded(mm))
+		return;
+
+	p4d = __p4d(p4d_val(p4d) | RANDOM_ORVALUE);
+	WRITE_ONCE(*p4dp, p4d);
+	p4d_clear(p4dp);
+	p4d = READ_ONCE(*p4dp);
+	WARN_ON(!p4d_none(p4d));
+}
+
+static void __init p4d_populate_tests(struct mm_struct *mm, p4d_t *p4dp,
+				      pud_t *pudp)
+{
+	p4d_t p4d;
+
+	if (mm_pud_folded(mm))
+		return;
+
+	/*
+	 * This entry points to next level page table page.
+	 * Hence this must not qualify as p4d_bad().
+	 */
+	pud_clear(pudp);
+	p4d_clear(p4dp);
+	p4d_populate(mm, p4dp, pudp);
+	p4d = READ_ONCE(*p4dp);
+	WARN_ON(p4d_bad(p4d));
+}
+
+static void __init pgd_clear_tests(struct mm_struct *mm, pgd_t *pgdp)
+{
+	pgd_t pgd = READ_ONCE(*pgdp);
+
+	if (mm_p4d_folded(mm))
+		return;
+
+	pgd = __pgd(pgd_val(pgd) | RANDOM_ORVALUE);
+	WRITE_ONCE(*pgdp, pgd);
+	pgd_clear(pgdp);
+	pgd = READ_ONCE(*pgdp);
+	WARN_ON(!pgd_none(pgd));
+}
+
+static void __init pgd_populate_tests(struct mm_struct *mm, pgd_t *pgdp,
+				      p4d_t *p4dp)
+{
+	pgd_t pgd;
+
+	if (mm_p4d_folded(mm))
+		return;
+
+	/*
+	 * This entry points to next level page table page.
+	 * Hence this must not qualify as pgd_bad().
+	 */
+	p4d_clear(p4dp);
+	pgd_clear(pgdp);
+	pgd_populate(mm, pgdp, p4dp);
+	pgd = READ_ONCE(*pgdp);
+	WARN_ON(pgd_bad(pgd));
+}
+#else  /* !__PAGETABLE_P4D_FOLDED */
+static void __init p4d_clear_tests(struct mm_struct *mm, p4d_t *p4dp) { }
+static void __init pgd_clear_tests(struct mm_struct *mm, pgd_t *pgdp) { }
+static void __init p4d_populate_tests(struct mm_struct *mm, p4d_t *p4dp,
+				      pud_t *pudp)
+{
+}
+static void __init pgd_populate_tests(struct mm_struct *mm, pgd_t *pgdp,
+				      p4d_t *p4dp)
+{
+}
+#endif /* PAGETABLE_P4D_FOLDED */
+
+static void __init pte_clear_tests(struct mm_struct *mm, pte_t *ptep,
+				   unsigned long vaddr)
+{
+	pte_t pte = READ_ONCE(*ptep);
+
+	pte = __pte(pte_val(pte) | RANDOM_ORVALUE);
+	set_pte_at(mm, vaddr, ptep, pte);
+	barrier();
+	pte_clear(mm, vaddr, ptep);
+	pte = READ_ONCE(*ptep);
+	WARN_ON(!pte_none(pte));
+}
+
+static void __init pmd_clear_tests(struct mm_struct *mm, pmd_t *pmdp)
+{
+	pmd_t pmd = READ_ONCE(*pmdp);
+
+	pmd = __pmd(pmd_val(pmd) | RANDOM_ORVALUE);
+	WRITE_ONCE(*pmdp, pmd);
+	pmd_clear(pmdp);
+	pmd = READ_ONCE(*pmdp);
+	WARN_ON(!pmd_none(pmd));
+}
+
+static void __init pmd_populate_tests(struct mm_struct *mm, pmd_t *pmdp,
+				      pgtable_t pgtable)
+{
+	pmd_t pmd;
+
+	/*
+	 * This entry points to next level page table page.
+	 * Hence this must not qualify as pmd_bad().
+	 */
+	pmd_clear(pmdp);
+	pmd_populate(mm, pmdp, pgtable);
+	pmd = READ_ONCE(*pmdp);
+	WARN_ON(pmd_bad(pmd));
+}
+
+static unsigned long __init get_random_vaddr(void)
+{
+	unsigned long random_vaddr, random_pages, total_user_pages;
+
+	total_user_pages = (TASK_SIZE - FIRST_USER_ADDRESS) / PAGE_SIZE;
+
+	random_pages = get_random_long() % total_user_pages;
+	random_vaddr = FIRST_USER_ADDRESS + random_pages * PAGE_SIZE;
+
+	return random_vaddr;
+}
+
+static int __init debug_vm_pgtable(void)
+{
+	struct mm_struct *mm;
+	pgd_t *pgdp;
+	p4d_t *p4dp, *saved_p4dp;
+	pud_t *pudp, *saved_pudp;
+	pmd_t *pmdp, *saved_pmdp, pmd;
+	pte_t *ptep;
+	pgtable_t saved_ptep;
+	pgprot_t prot;
+	phys_addr_t paddr;
+	unsigned long vaddr, pte_aligned, pmd_aligned;
+	unsigned long pud_aligned, p4d_aligned, pgd_aligned;
+	spinlock_t *uninitialized_var(ptl);
+
+	pr_info("Validating architecture page table helpers\n");
+	prot = vm_get_page_prot(VMFLAGS);
+	vaddr = get_random_vaddr();
+	mm = mm_alloc();
+	if (!mm) {
+		pr_err("mm_struct allocation failed\n");
+		return 1;
+	}
+
+	/*
+	 * PFN for mapping at PTE level is determined from a standard kernel
+	 * text symbol. But pfns for higher page table levels are derived by
+	 * masking lower bits of this real pfn. These derived pfns might not
+	 * exist on the platform but that does not really matter as pfn_pxx()
+	 * helpers will still create appropriate entries for the test. This
+	 * helps avoid large memory block allocations to be used for mapping
+	 * at higher page table levels.
+	 */
+	paddr = __pa_symbol(&start_kernel);
+
+	pte_aligned = (paddr & PAGE_MASK) >> PAGE_SHIFT;
+	pmd_aligned = (paddr & PMD_MASK) >> PAGE_SHIFT;
+	pud_aligned = (paddr & PUD_MASK) >> PAGE_SHIFT;
+	p4d_aligned = (paddr & P4D_MASK) >> PAGE_SHIFT;
+	pgd_aligned = (paddr & PGDIR_MASK) >> PAGE_SHIFT;
+	WARN_ON(!pfn_valid(pte_aligned));
+
+	pgdp = pgd_offset(mm, vaddr);
+	p4dp = p4d_alloc(mm, pgdp, vaddr);
+	pudp = pud_alloc(mm, p4dp, vaddr);
+	pmdp = pmd_alloc(mm, pudp, vaddr);
+	ptep = pte_alloc_map_lock(mm, pmdp, vaddr, &ptl);
+
+	/*
+	 * Save all the page table page addresses as the page table
+	 * entries will be used for testing with random or garbage
+	 * values. These saved addresses will be used for freeing
+	 * page table pages.
+	 */
+	pmd = READ_ONCE(*pmdp);
+	saved_p4dp = p4d_offset(pgdp, 0UL);
+	saved_pudp = pud_offset(p4dp, 0UL);
+	saved_pmdp = pmd_offset(pudp, 0UL);
+	saved_ptep = pmd_pgtable(pmd);
+
+	pte_basic_tests(pte_aligned, prot);
+	pmd_basic_tests(pmd_aligned, prot);
+	pud_basic_tests(pud_aligned, prot);
+	p4d_basic_tests(p4d_aligned, prot);
+	pgd_basic_tests(pgd_aligned, prot);
+
+	pte_clear_tests(mm, ptep, vaddr);
+	pmd_clear_tests(mm, pmdp);
+	pud_clear_tests(mm, pudp);
+	p4d_clear_tests(mm, p4dp);
+	pgd_clear_tests(mm, pgdp);
+
+	pte_unmap_unlock(ptep, ptl);
+
+	pmd_populate_tests(mm, pmdp, saved_ptep);
+	pud_populate_tests(mm, pudp, saved_pmdp);
+	p4d_populate_tests(mm, p4dp, saved_pudp);
+	pgd_populate_tests(mm, pgdp, saved_p4dp);
+
+	p4d_free(mm, saved_p4dp);
+	pud_free(mm, saved_pudp);
+	pmd_free(mm, saved_pmdp);
+	pte_free(mm, saved_ptep);
+
+	mm_dec_nr_puds(mm);
+	mm_dec_nr_pmds(mm);
+	mm_dec_nr_ptes(mm);
+	mmdrop(mm);
+	return 0;
+}
+late_initcall(debug_vm_pgtable);
diff --git a/mm/fadvise.c b/mm/fadvise.c
index 4f17c83db575..0e66f2aaeea3 100644
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -22,6 +22,8 @@
 
 #include <asm/unistd.h>
 
+#include "internal.h"
+
 /*
  * POSIX_FADV_WILLNEED could set PG_Referenced, and POSIX_FADV_NOREUSE could
  * deactivate the pages and clear PG_Referenced.
@@ -102,10 +104,6 @@ int generic_fadvise(struct file *file, loff_t offset, loff_t len, int advice)
 		if (!nrpages)
 			nrpages = ~0UL;
 
-		/*
-		 * Ignore return value because fadvise() shall return
-		 * success even if filesystem can't retrieve a hint,
-		 */
 		force_page_cache_readahead(mapping, file, start_index, nrpages);
 		break;
 	case POSIX_FADV_NOREUSE:
diff --git a/mm/filemap.c b/mm/filemap.c
index 23a051a7ef0f..af1c6adad5bd 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1259,7 +1259,7 @@ EXPORT_SYMBOL_GPL(add_page_wait_queue);
  * instead.
  *
  * The read of PG_waiters has to be after (or concurrently with) PG_locked
- * being cleared, but a memory barrier should be unneccssary since it is
+ * being cleared, but a memory barrier should be unnecessary since it is
  * in the same byte as PG_locked.
  */
 static inline bool clear_bit_unlock_is_negative_byte(long nr, volatile void *mem)
@@ -2372,6 +2372,7 @@ static struct file *do_sync_mmap_readahead(struct vm_fault *vmf)
 	struct address_space *mapping = file->f_mapping;
 	struct file *fpin = NULL;
 	pgoff_t offset = vmf->pgoff;
+	unsigned int mmap_miss;
 
 	/* If we don't want any read-ahead, don't bother */
 	if (vmf->vma->vm_flags & VM_RAND_READ)
@@ -2387,14 +2388,15 @@ static struct file *do_sync_mmap_readahead(struct vm_fault *vmf)
 	}
 
 	/* Avoid banging the cache line if not needed */
-	if (ra->mmap_miss < MMAP_LOTSAMISS * 10)
-		ra->mmap_miss++;
+	mmap_miss = READ_ONCE(ra->mmap_miss);
+	if (mmap_miss < MMAP_LOTSAMISS * 10)
+		WRITE_ONCE(ra->mmap_miss, ++mmap_miss);
 
 	/*
 	 * Do we miss much more than hit in this file? If so,
 	 * stop bothering with read-ahead. It will only hurt.
 	 */
-	if (ra->mmap_miss > MMAP_LOTSAMISS)
+	if (mmap_miss > MMAP_LOTSAMISS)
 		return fpin;
 
 	/*
@@ -2420,13 +2422,15 @@ static struct file *do_async_mmap_readahead(struct vm_fault *vmf,
 	struct file_ra_state *ra = &file->f_ra;
 	struct address_space *mapping = file->f_mapping;
 	struct file *fpin = NULL;
+	unsigned int mmap_miss;
 	pgoff_t offset = vmf->pgoff;
 
 	/* If we don't want any read-ahead, don't bother */
 	if (vmf->vma->vm_flags & VM_RAND_READ || !ra->ra_pages)
 		return fpin;
-	if (ra->mmap_miss > 0)
-		ra->mmap_miss--;
+	mmap_miss = READ_ONCE(ra->mmap_miss);
+	if (mmap_miss)
+		WRITE_ONCE(ra->mmap_miss, --mmap_miss);
 	if (PageReadahead(page)) {
 		fpin = maybe_unlock_mmap_for_io(vmf, fpin);
 		page_cache_async_readahead(mapping, ra, file,
@@ -2593,6 +2597,7 @@ void filemap_map_pages(struct vm_fault *vmf,
 	unsigned long max_idx;
 	XA_STATE(xas, &mapping->i_pages, start_pgoff);
 	struct page *page;
+	unsigned int mmap_miss = READ_ONCE(file->f_ra.mmap_miss);
 
 	rcu_read_lock();
 	xas_for_each(&xas, page, end_pgoff) {
@@ -2629,8 +2634,8 @@ void filemap_map_pages(struct vm_fault *vmf,
 		if (page->index >= max_idx)
 			goto unlock;
 
-		if (file->f_ra.mmap_miss > 0)
-			file->f_ra.mmap_miss--;
+		if (mmap_miss > 0)
+			mmap_miss--;
 
 		vmf->address += (xas.xa_index - last_pgoff) << PAGE_SHIFT;
 		if (vmf->pte)
@@ -2650,6 +2655,7 @@ void filemap_map_pages(struct vm_fault *vmf,
 			break;
 	}
 	rcu_read_unlock();
+	WRITE_ONCE(file->f_ra.mmap_miss, mmap_miss);
 }
 EXPORT_SYMBOL(filemap_map_pages);
 
diff --git a/mm/frontswap.c b/mm/frontswap.c
index 60bb20e8a951..5c8c66bbedde 100644
--- a/mm/frontswap.c
+++ b/mm/frontswap.c
@@ -61,16 +61,16 @@ static u64 frontswap_failed_stores;
 static u64 frontswap_invalidates;
 
 static inline void inc_frontswap_loads(void) {
-	frontswap_loads++;
+	data_race(frontswap_loads++);
 }
 static inline void inc_frontswap_succ_stores(void) {
-	frontswap_succ_stores++;
+	data_race(frontswap_succ_stores++);
 }
 static inline void inc_frontswap_failed_stores(void) {
-	frontswap_failed_stores++;
+	data_race(frontswap_failed_stores++);
 }
 static inline void inc_frontswap_invalidates(void) {
-	frontswap_invalidates++;
+	data_race(frontswap_invalidates++);
 }
 #else
 static inline void inc_frontswap_loads(void) { }
@@ -87,7 +87,7 @@ static inline void inc_frontswap_invalidates(void) { }
  *
  * This would not guards us against the user deciding to call swapoff right as
  * we are calling the backend to initialize (so swapon is in action).
- * Fortunatly for us, the swapon_mutex has been taked by the callee so we are
+ * Fortunately for us, the swapon_mutex has been taken by the callee so we are
  * OK. The other scenario where calls to frontswap_store (called via
  * swap_writepage) is racing with frontswap_invalidate_area (called via
  * swapoff) is again guarded by the swap subsystem.
@@ -413,8 +413,8 @@ static int __frontswap_unuse_pages(unsigned long total, unsigned long *unused,
 }
 
 /*
- * Used to check if it's necessory and feasible to unuse pages.
- * Return 1 when nothing to do, 0 when need to shink pages,
+ * Used to check if it's necessary and feasible to unuse pages.
+ * Return 1 when nothing to do, 0 when need to shrink pages,
  * error code when there is an error.
  */
 static int __frontswap_shrink(unsigned long target_pages,
diff --git a/mm/gup.c b/mm/gup.c
index 50681f0286de..11fda538c9d9 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -980,6 +980,7 @@ static int check_vma_flags(struct vm_area_struct *vma, unsigned long gup_flags)
  * -- If nr_pages is >0, but no pages were pinned, returns -errno.
  * -- If nr_pages is >0, and some pages were pinned, returns the number of
  *    pages pinned. Again, this may be less than nr_pages.
+ * -- 0 return value is possible when the fault would need to be retried.
  *
  * The caller is responsible for releasing returned @pages, via put_page().
  *
@@ -1168,7 +1169,7 @@ static bool vma_permits_fault(struct vm_area_struct *vma,
 	return true;
 }
 
-/*
+/**
  * fixup_user_fault() - manually resolve a user page fault
  * @tsk:	the task_struct to use for page fault accounting, or
  *		NULL if faults are not to be recorded.
@@ -1176,7 +1177,8 @@ static bool vma_permits_fault(struct vm_area_struct *vma,
  * @address:	user address
  * @fault_flags:flags to pass down to handle_mm_fault()
  * @unlocked:	did we unlock the mmap_sem while retrying, maybe NULL if caller
- *		does not allow retry
+ *		does not allow retry. If NULL, the caller must guarantee
+ *		that fault_flags does not contain FAULT_FLAG_ALLOW_RETRY.
  *
  * This is meant to be called in the specific scenario where for locking reasons
  * we try to access user memory in atomic context (within a pagefault_disable()
@@ -1247,6 +1249,10 @@ int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm,
 }
 EXPORT_SYMBOL_GPL(fixup_user_fault);
 
+/*
+ * Please note that this function, unlike __get_user_pages will not
+ * return 0 for nr_pages > 0 without FOLL_NOWAIT
+ */
 static __always_inline long __get_user_pages_locked(struct task_struct *tsk,
 						struct mm_struct *mm,
 						unsigned long start,
@@ -1837,7 +1843,7 @@ static long __get_user_pages_remote(struct task_struct *tsk,
 				       gup_flags | FOLL_TOUCH | FOLL_REMOTE);
 }
 
-/*
+/**
  * get_user_pages_remote() - pin user pages in memory
  * @tsk:	the task_struct to use for page fault accounting, or
  *		NULL if faults are not to be recorded.
@@ -1868,13 +1874,13 @@ static long __get_user_pages_remote(struct task_struct *tsk,
  *
  * Must be called with mmap_sem held for read or write.
  *
- * get_user_pages walks a process's page tables and takes a reference to
- * each struct page that each user address corresponds to at a given
+ * get_user_pages_remote walks a process's page tables and takes a reference
+ * to each struct page that each user address corresponds to at a given
  * instant. That is, it takes the page that would be accessed if a user
  * thread accesses the given user virtual address at that instant.
  *
  * This does not guarantee that the page exists in the user mappings when
- * get_user_pages returns, and there may even be a completely different
+ * get_user_pages_remote returns, and there may even be a completely different
  * page there in some cases (eg. if mmapped pagecache has been invalidated
  * and subsequently re faulted). However it does guarantee that the page
  * won't be freed completely. And mostly callers simply care that the page
@@ -1886,17 +1892,17 @@ static long __get_user_pages_remote(struct task_struct *tsk,
  * is written to, set_page_dirty (or set_page_dirty_lock, as appropriate) must
  * be called after the page is finished with, and before put_page is called.
  *
- * get_user_pages is typically used for fewer-copy IO operations, to get a
- * handle on the memory by some means other than accesses via the user virtual
- * addresses. The pages may be submitted for DMA to devices or accessed via
- * their kernel linear mapping (via the kmap APIs). Care should be taken to
- * use the correct cache flushing APIs.
+ * get_user_pages_remote is typically used for fewer-copy IO operations,
+ * to get a handle on the memory by some means other than accesses
+ * via the user virtual addresses. The pages may be submitted for
+ * DMA to devices or accessed via their kernel linear mapping (via the
+ * kmap APIs). Care should be taken to use the correct cache flushing APIs.
  *
  * See also get_user_pages_fast, for performance critical applications.
  *
- * get_user_pages should be phased out in favor of
+ * get_user_pages_remote should be phased out in favor of
  * get_user_pages_locked|unlocked or get_user_pages_fast. Nothing
- * should use get_user_pages because it cannot pass
+ * should use get_user_pages_remote because it cannot pass
  * FAULT_FLAG_ALLOW_RETRY to handle_mm_fault.
  */
 long get_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm,
@@ -1935,7 +1941,17 @@ static long __get_user_pages_remote(struct task_struct *tsk,
 }
 #endif /* !CONFIG_MMU */
 
-/*
+/**
+ * get_user_pages() - pin user pages in memory
+ * @start:      starting user address
+ * @nr_pages:   number of pages from start to pin
+ * @gup_flags:  flags modifying lookup behaviour
+ * @pages:      array that receives pointers to the pages pinned.
+ *              Should be at least nr_pages long. Or NULL, if caller
+ *              only intends to ensure the pages are faulted in.
+ * @vmas:       array of pointers to vmas corresponding to each page.
+ *              Or NULL if the caller does not require them.
+ *
  * This is the same as get_user_pages_remote(), just with a
  * less-flexible calling convention where we assume that the task
  * and mm being operated on are the current task's and don't allow
@@ -1958,11 +1974,7 @@ long get_user_pages(unsigned long start, unsigned long nr_pages,
 }
 EXPORT_SYMBOL(get_user_pages);
 
-/*
- * We can leverage the VM_FAULT_RETRY functionality in the page fault
- * paths better by using either get_user_pages_locked() or
- * get_user_pages_unlocked().
- *
+/**
  * get_user_pages_locked() is suitable to replace the form:
  *
  *      down_read(&mm->mmap_sem);
@@ -1978,6 +1990,21 @@ EXPORT_SYMBOL(get_user_pages);
  *      get_user_pages_locked(tsk, mm, ..., pages, &locked);
  *      if (locked)
  *          up_read(&mm->mmap_sem);
+ *
+ * @start:      starting user address
+ * @nr_pages:   number of pages from start to pin
+ * @gup_flags:  flags modifying lookup behaviour
+ * @pages:      array that receives pointers to the pages pinned.
+ *              Should be at least nr_pages long. Or NULL, if caller
+ *              only intends to ensure the pages are faulted in.
+ * @locked:     pointer to lock flag indicating whether lock is held and
+ *              subsequently whether VM_FAULT_RETRY functionality can be
+ *              utilised. Lock must initially be held.
+ *
+ * We can leverage the VM_FAULT_RETRY functionality in the page fault
+ * paths better by using either get_user_pages_locked() or
+ * get_user_pages_unlocked().
+ *
  */
 long get_user_pages_locked(unsigned long start, unsigned long nr_pages,
 			   unsigned int gup_flags, struct page **pages,
@@ -2843,9 +2870,9 @@ EXPORT_SYMBOL_GPL(get_user_pages_fast);
  * the arguments here are identical.
  *
  * FOLL_PIN means that the pages must be released via unpin_user_page(). Please
- * see Documentation/vm/pin_user_pages.rst for further details.
+ * see Documentation/core-api/pin_user_pages.rst for further details.
  *
- * This is intended for Case 1 (DIO) in Documentation/vm/pin_user_pages.rst. It
+ * This is intended for Case 1 (DIO) in Documentation/core-api/pin_user_pages.rst. It
  * is NOT intended for Case 2 (RDMA: long-term pins).
  */
 int pin_user_pages_fast(unsigned long start, int nr_pages,
@@ -2883,9 +2910,9 @@ EXPORT_SYMBOL_GPL(pin_user_pages_fast);
  * the arguments here are identical.
  *
  * FOLL_PIN means that the pages must be released via unpin_user_page(). Please
- * see Documentation/vm/pin_user_pages.rst for details.
+ * see Documentation/core-api/pin_user_pages.rst for details.
  *
- * This is intended for Case 1 (DIO) in Documentation/vm/pin_user_pages.rst. It
+ * This is intended for Case 1 (DIO) in Documentation/core-api/pin_user_pages.rst. It
  * is NOT intended for Case 2 (RDMA: long-term pins).
  */
 long pin_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm,
@@ -2919,9 +2946,9 @@ EXPORT_SYMBOL(pin_user_pages_remote);
  * FOLL_PIN is set.
  *
  * FOLL_PIN means that the pages must be released via unpin_user_page(). Please
- * see Documentation/vm/pin_user_pages.rst for details.
+ * see Documentation/core-api/pin_user_pages.rst for details.
  *
- * This is intended for Case 1 (DIO) in Documentation/vm/pin_user_pages.rst. It
+ * This is intended for Case 1 (DIO) in Documentation/core-api/pin_user_pages.rst. It
  * is NOT intended for Case 2 (RDMA: long-term pins).
  */
 long pin_user_pages(unsigned long start, unsigned long nr_pages,
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 6ecd1045113b..d7384eb2e017 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -522,7 +522,7 @@ void prep_transhuge_page(struct page *page)
 bool is_transparent_hugepage(struct page *page)
 {
 	if (!PageCompound(page))
-		return 0;
+		return false;
 
 	page = compound_head(page);
 	return is_huge_zero_page(page) ||
@@ -1255,263 +1255,63 @@ void huge_pmd_set_accessed(struct vm_fault *vmf, pmd_t orig_pmd)
 	spin_unlock(vmf->ptl);
 }
 
-static vm_fault_t do_huge_pmd_wp_page_fallback(struct vm_fault *vmf,
-			pmd_t orig_pmd, struct page *page)
-{
-	struct vm_area_struct *vma = vmf->vma;
-	unsigned long haddr = vmf->address & HPAGE_PMD_MASK;
-	struct mem_cgroup *memcg;
-	pgtable_t pgtable;
-	pmd_t _pmd;
-	int i;
-	vm_fault_t ret = 0;
-	struct page **pages;
-	struct mmu_notifier_range range;
-
-	pages = kmalloc_array(HPAGE_PMD_NR, sizeof(struct page *),
-			      GFP_KERNEL);
-	if (unlikely(!pages)) {
-		ret |= VM_FAULT_OOM;
-		goto out;
-	}
-
-	for (i = 0; i < HPAGE_PMD_NR; i++) {
-		pages[i] = alloc_page_vma_node(GFP_HIGHUSER_MOVABLE, vma,
-					       vmf->address, page_to_nid(page));
-		if (unlikely(!pages[i] ||
-			     mem_cgroup_try_charge_delay(pages[i], vma->vm_mm,
-				     GFP_KERNEL, &memcg, false))) {
-			if (pages[i])
-				put_page(pages[i]);
-			while (--i >= 0) {
-				memcg = (void *)page_private(pages[i]);
-				set_page_private(pages[i], 0);
-				mem_cgroup_cancel_charge(pages[i], memcg,
-						false);
-				put_page(pages[i]);
-			}
-			kfree(pages);
-			ret |= VM_FAULT_OOM;
-			goto out;
-		}
-		set_page_private(pages[i], (unsigned long)memcg);
-	}
-
-	for (i = 0; i < HPAGE_PMD_NR; i++) {
-		copy_user_highpage(pages[i], page + i,
-				   haddr + PAGE_SIZE * i, vma);
-		__SetPageUptodate(pages[i]);
-		cond_resched();
-	}
-
-	mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, vma, vma->vm_mm,
-				haddr, haddr + HPAGE_PMD_SIZE);
-	mmu_notifier_invalidate_range_start(&range);
-
-	vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd);
-	if (unlikely(!pmd_same(*vmf->pmd, orig_pmd)))
-		goto out_free_pages;
-	VM_BUG_ON_PAGE(!PageHead(page), page);
-
-	/*
-	 * Leave pmd empty until pte is filled note we must notify here as
-	 * concurrent CPU thread might write to new page before the call to
-	 * mmu_notifier_invalidate_range_end() happens which can lead to a
-	 * device seeing memory write in different order than CPU.
-	 *
-	 * See Documentation/vm/mmu_notifier.rst
-	 */
-	pmdp_huge_clear_flush_notify(vma, haddr, vmf->pmd);
-
-	pgtable = pgtable_trans_huge_withdraw(vma->vm_mm, vmf->pmd);
-	pmd_populate(vma->vm_mm, &_pmd, pgtable);
-
-	for (i = 0; i < HPAGE_PMD_NR; i++, haddr += PAGE_SIZE) {
-		pte_t entry;
-		entry = mk_pte(pages[i], vma->vm_page_prot);
-		entry = maybe_mkwrite(pte_mkdirty(entry), vma);
-		memcg = (void *)page_private(pages[i]);
-		set_page_private(pages[i], 0);
-		page_add_new_anon_rmap(pages[i], vmf->vma, haddr, false);
-		mem_cgroup_commit_charge(pages[i], memcg, false, false);
-		lru_cache_add_active_or_unevictable(pages[i], vma);
-		vmf->pte = pte_offset_map(&_pmd, haddr);
-		VM_BUG_ON(!pte_none(*vmf->pte));
-		set_pte_at(vma->vm_mm, haddr, vmf->pte, entry);
-		pte_unmap(vmf->pte);
-	}
-	kfree(pages);
-
-	smp_wmb(); /* make pte visible before pmd */
-	pmd_populate(vma->vm_mm, vmf->pmd, pgtable);
-	page_remove_rmap(page, true);
-	spin_unlock(vmf->ptl);
-
-	/*
-	 * No need to double call mmu_notifier->invalidate_range() callback as
-	 * the above pmdp_huge_clear_flush_notify() did already call it.
-	 */
-	mmu_notifier_invalidate_range_only_end(&range);
-
-	ret |= VM_FAULT_WRITE;
-	put_page(page);
-
-out:
-	return ret;
-
-out_free_pages:
-	spin_unlock(vmf->ptl);
-	mmu_notifier_invalidate_range_end(&range);
-	for (i = 0; i < HPAGE_PMD_NR; i++) {
-		memcg = (void *)page_private(pages[i]);
-		set_page_private(pages[i], 0);
-		mem_cgroup_cancel_charge(pages[i], memcg, false);
-		put_page(pages[i]);
-	}
-	kfree(pages);
-	goto out;
-}
-
 vm_fault_t do_huge_pmd_wp_page(struct vm_fault *vmf, pmd_t orig_pmd)
 {
 	struct vm_area_struct *vma = vmf->vma;
-	struct page *page = NULL, *new_page;
-	struct mem_cgroup *memcg;
+	struct page *page;
 	unsigned long haddr = vmf->address & HPAGE_PMD_MASK;
-	struct mmu_notifier_range range;
-	gfp_t huge_gfp;			/* for allocation and charge */
-	vm_fault_t ret = 0;
 
 	vmf->ptl = pmd_lockptr(vma->vm_mm, vmf->pmd);
 	VM_BUG_ON_VMA(!vma->anon_vma, vma);
+
 	if (is_huge_zero_pmd(orig_pmd))
-		goto alloc;
+		goto fallback;
+
 	spin_lock(vmf->ptl);
-	if (unlikely(!pmd_same(*vmf->pmd, orig_pmd)))
-		goto out_unlock;
+
+	if (unlikely(!pmd_same(*vmf->pmd, orig_pmd))) {
+		spin_unlock(vmf->ptl);
+		return 0;
+	}
 
 	page = pmd_page(orig_pmd);
 	VM_BUG_ON_PAGE(!PageCompound(page) || !PageHead(page), page);
-	/*
-	 * We can only reuse the page if nobody else maps the huge page or it's
-	 * part.
-	 */
+
+	/* Lock page for reuse_swap_page() */
 	if (!trylock_page(page)) {
 		get_page(page);
 		spin_unlock(vmf->ptl);
 		lock_page(page);
 		spin_lock(vmf->ptl);
 		if (unlikely(!pmd_same(*vmf->pmd, orig_pmd))) {
+			spin_unlock(vmf->ptl);
 			unlock_page(page);
 			put_page(page);
-			goto out_unlock;
+			return 0;
 		}
 		put_page(page);
 	}
+
+	/*
+	 * We can only reuse the page if nobody else maps the huge page or it's
+	 * part.
+	 */
 	if (reuse_swap_page(page, NULL)) {
 		pmd_t entry;
 		entry = pmd_mkyoung(orig_pmd);
 		entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma);
-		if (pmdp_set_access_flags(vma, haddr, vmf->pmd, entry,  1))
+		if (pmdp_set_access_flags(vma, haddr, vmf->pmd, entry, 1))
 			update_mmu_cache_pmd(vma, vmf->address, vmf->pmd);
-		ret |= VM_FAULT_WRITE;
 		unlock_page(page);
-		goto out_unlock;
-	}
-	unlock_page(page);
-	get_page(page);
-	spin_unlock(vmf->ptl);
-alloc:
-	if (__transparent_hugepage_enabled(vma) &&
-	    !transparent_hugepage_debug_cow()) {
-		huge_gfp = alloc_hugepage_direct_gfpmask(vma);
-		new_page = alloc_hugepage_vma(huge_gfp, vma, haddr, HPAGE_PMD_ORDER);
-	} else
-		new_page = NULL;
-
-	if (likely(new_page)) {
-		prep_transhuge_page(new_page);
-	} else {
-		if (!page) {
-			split_huge_pmd(vma, vmf->pmd, vmf->address);
-			ret |= VM_FAULT_FALLBACK;
-		} else {
-			ret = do_huge_pmd_wp_page_fallback(vmf, orig_pmd, page);
-			if (ret & VM_FAULT_OOM) {
-				split_huge_pmd(vma, vmf->pmd, vmf->address);
-				ret |= VM_FAULT_FALLBACK;
-			}
-			put_page(page);
-		}
-		count_vm_event(THP_FAULT_FALLBACK);
-		goto out;
-	}
-
-	if (unlikely(mem_cgroup_try_charge_delay(new_page, vma->vm_mm,
-					huge_gfp, &memcg, true))) {
-		put_page(new_page);
-		split_huge_pmd(vma, vmf->pmd, vmf->address);
-		if (page)
-			put_page(page);
-		ret |= VM_FAULT_FALLBACK;
-		count_vm_event(THP_FAULT_FALLBACK);
-		count_vm_event(THP_FAULT_FALLBACK_CHARGE);
-		goto out;
-	}
-
-	count_vm_event(THP_FAULT_ALLOC);
-	count_memcg_events(memcg, THP_FAULT_ALLOC, 1);
-
-	if (!page)
-		clear_huge_page(new_page, vmf->address, HPAGE_PMD_NR);
-	else
-		copy_user_huge_page(new_page, page, vmf->address,
-				    vma, HPAGE_PMD_NR);
-	__SetPageUptodate(new_page);
-
-	mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, vma, vma->vm_mm,
-				haddr, haddr + HPAGE_PMD_SIZE);
-	mmu_notifier_invalidate_range_start(&range);
-
-	spin_lock(vmf->ptl);
-	if (page)
-		put_page(page);
-	if (unlikely(!pmd_same(*vmf->pmd, orig_pmd))) {
 		spin_unlock(vmf->ptl);
-		mem_cgroup_cancel_charge(new_page, memcg, true);
-		put_page(new_page);
-		goto out_mn;
-	} else {
-		pmd_t entry;
-		entry = mk_huge_pmd(new_page, vma->vm_page_prot);
-		entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma);
-		pmdp_huge_clear_flush_notify(vma, haddr, vmf->pmd);
-		page_add_new_anon_rmap(new_page, vma, haddr, true);
-		mem_cgroup_commit_charge(new_page, memcg, false, true);
-		lru_cache_add_active_or_unevictable(new_page, vma);
-		set_pmd_at(vma->vm_mm, haddr, vmf->pmd, entry);
-		update_mmu_cache_pmd(vma, vmf->address, vmf->pmd);
-		if (!page) {
-			add_mm_counter(vma->vm_mm, MM_ANONPAGES, HPAGE_PMD_NR);
-		} else {
-			VM_BUG_ON_PAGE(!PageHead(page), page);
-			page_remove_rmap(page, true);
-			put_page(page);
-		}
-		ret |= VM_FAULT_WRITE;
+		return VM_FAULT_WRITE;
 	}
+
+	unlock_page(page);
 	spin_unlock(vmf->ptl);
-out_mn:
-	/*
-	 * No need to double call mmu_notifier->invalidate_range() callback as
-	 * the above pmdp_huge_clear_flush_notify() did already call it.
-	 */
-	mmu_notifier_invalidate_range_only_end(&range);
-out:
-	return ret;
-out_unlock:
-	spin_unlock(vmf->ptl);
-	return ret;
+fallback:
+	__split_huge_pmd(vma, vmf->pmd, vmf->address, false, NULL);
+	return VM_FAULT_FALLBACK;
 }
 
 /*
@@ -1582,7 +1382,6 @@ struct page *follow_trans_huge_pmd(struct vm_area_struct *vma,
 			goto skip_mlock;
 		if (!trylock_page(page))
 			goto skip_mlock;
-		lru_add_drain();
 		if (page->mapping && !PageDoubleMap(page))
 			mlock_vma_page(page);
 		unlock_page(page);
@@ -2784,7 +2583,6 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
 	struct anon_vma *anon_vma = NULL;
 	struct address_space *mapping = NULL;
 	int count, mapcount, extra_pins, ret;
-	bool mlocked;
 	unsigned long flags;
 	pgoff_t end;
 
@@ -2843,14 +2641,9 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
 		goto out_unlock;
 	}
 
-	mlocked = PageMlocked(head);
 	unmap_page(head);
 	VM_BUG_ON_PAGE(compound_mapcount(head), head);
 
-	/* Make sure the page is not on per-CPU pagevec as it takes pin */
-	if (mlocked)
-		lru_add_drain();
-
 	/* prevent PageLRU to go away from under us, and freeze lru stats */
 	spin_lock_irqsave(&pgdata->lru_lock, flags);
 
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index bcabbe02192b..dcb34d7f5562 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -59,8 +59,8 @@ __initdata LIST_HEAD(huge_boot_pages);
 /* for command line parsing */
 static struct hstate * __initdata parsed_hstate;
 static unsigned long __initdata default_hstate_max_huge_pages;
-static unsigned long __initdata default_hstate_size;
 static bool __initdata parsed_valid_hugepagesz = true;
+static bool __initdata parsed_default_hugepagesz;
 
 /*
  * Protects updates to hugepage_freelists, hugepage_activelist, nr_huge_pages,
@@ -85,7 +85,7 @@ static inline void unlock_or_release_subpool(struct hugepage_subpool *spool)
 	spin_unlock(&spool->lock);
 
 	/* If no pages are used, and no other handles to the subpool
-	 * remain, give up any reservations mased on minimum size and
+	 * remain, give up any reservations based on minimum size and
 	 * free the subpool */
 	if (free) {
 		if (spool->min_hpages != -1)
@@ -133,7 +133,7 @@ void hugepage_put_subpool(struct hugepage_subpool *spool)
  * the request.  Otherwise, return the number of pages by which the
  * global pools must be adjusted (upward).  The returned value may
  * only be different than the passed value (delta) in the case where
- * a subpool minimum size must be manitained.
+ * a subpool minimum size must be maintained.
  */
 static long hugepage_subpool_get_pages(struct hugepage_subpool *spool,
 				      long delta)
@@ -473,7 +473,7 @@ static int allocate_file_region_entries(struct resv_map *resv,
  *
  * Return the number of new huge pages added to the map.  This number is greater
  * than or equal to zero.  If file_region entries needed to be allocated for
- * this operation and we were not able to allocate, it ruturns -ENOMEM.
+ * this operation and we were not able to allocate, it returns -ENOMEM.
  * region_add of regions of length 1 never allocate file_regions and cannot
  * fail; region_chg will always allocate at least 1 entry and a region_add for
  * 1 page will only require at most 1 entry.
@@ -988,7 +988,7 @@ static bool vma_has_reserves(struct vm_area_struct *vma, long chg)
 		 * We know VM_NORESERVE is not set.  Therefore, there SHOULD
 		 * be a region map for all pages.  The only situation where
 		 * there is no region map is if a hole was punched via
-		 * fallocate.  In this case, there really are no reverves to
+		 * fallocate.  In this case, there really are no reserves to
 		 * use.  This situation is indicated if chg != 0.
 		 */
 		if (chg)
@@ -1519,7 +1519,7 @@ static void prep_compound_gigantic_page(struct page *page, unsigned int order)
 		 * For gigantic hugepages allocated through bootmem at
 		 * boot, it's safer to be consistent with the not-gigantic
 		 * hugepages and clear the PG_reserved bit from all tail pages
-		 * too.  Otherwse drivers using get_user_pages() to access tail
+		 * too.  Otherwise drivers using get_user_pages() to access tail
 		 * pages may get the reference counting wrong if they see
 		 * PG_reserved set on a tail page (despite the head page not
 		 * having PG_reserved set).  Enforcing this consistency between
@@ -3060,7 +3060,7 @@ static void __init hugetlb_sysfs_init(void)
 		err = hugetlb_sysfs_add_hstate(h, hugepages_kobj,
 					 hstate_kobjs, &hstate_attr_group);
 		if (err)
-			pr_err("Hugetlb: Unable to add hstate %s", h->name);
+			pr_err("HugeTLB: Unable to add hstate %s", h->name);
 	}
 }
 
@@ -3164,7 +3164,7 @@ static void hugetlb_register_node(struct node *node)
 						nhs->hstate_kobjs,
 						&per_node_hstate_attr_group);
 		if (err) {
-			pr_err("Hugetlb: Unable to add hstate %s for node %d\n",
+			pr_err("HugeTLB: Unable to add hstate %s for node %d\n",
 				h->name, node->dev.id);
 			hugetlb_unregister_node(node);
 			break;
@@ -3212,23 +3212,41 @@ static int __init hugetlb_init(void)
 {
 	int i;
 
-	if (!hugepages_supported())
+	if (!hugepages_supported()) {
+		if (hugetlb_max_hstate || default_hstate_max_huge_pages)
+			pr_warn("HugeTLB: huge pages not supported, ignoring associated command-line parameters\n");
 		return 0;
+	}
 
-	if (!size_to_hstate(default_hstate_size)) {
-		if (default_hstate_size != 0) {
-			pr_err("HugeTLB: unsupported default_hugepagesz %lu. Reverting to %lu\n",
-			       default_hstate_size, HPAGE_SIZE);
+	/*
+	 * Make sure HPAGE_SIZE (HUGETLB_PAGE_ORDER) hstate exists.  Some
+	 * architectures depend on setup being done here.
+	 */
+	hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
+	if (!parsed_default_hugepagesz) {
+		/*
+		 * If we did not parse a default huge page size, set
+		 * default_hstate_idx to HPAGE_SIZE hstate. And, if the
+		 * number of huge pages for this default size was implicitly
+		 * specified, set that here as well.
+		 * Note that the implicit setting will overwrite an explicit
+		 * setting.  A warning will be printed in this case.
+		 */
+		default_hstate_idx = hstate_index(size_to_hstate(HPAGE_SIZE));
+		if (default_hstate_max_huge_pages) {
+			if (default_hstate.max_huge_pages) {
+				char buf[32];
+
+				string_get_size(huge_page_size(&default_hstate),
+					1, STRING_UNITS_2, buf, 32);
+				pr_warn("HugeTLB: Ignoring hugepages=%lu associated with %s page size\n",
+					default_hstate.max_huge_pages, buf);
+				pr_warn("HugeTLB: Using hugepages=%lu for number of default huge pages\n",
+					default_hstate_max_huge_pages);
+			}
+			default_hstate.max_huge_pages =
+				default_hstate_max_huge_pages;
 		}
-
-		default_hstate_size = HPAGE_SIZE;
-		if (!size_to_hstate(default_hstate_size))
-			hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
-	}
-	default_hstate_idx = hstate_index(size_to_hstate(default_hstate_size));
-	if (default_hstate_max_huge_pages) {
-		if (!default_hstate.max_huge_pages)
-			default_hstate.max_huge_pages = default_hstate_max_huge_pages;
 	}
 
 	hugetlb_cma_check();
@@ -3256,10 +3274,10 @@ static int __init hugetlb_init(void)
 }
 subsys_initcall(hugetlb_init);
 
-/* Should be called on processing a hugepagesz=... option */
-void __init hugetlb_bad_size(void)
+/* Overwritten by architectures with more huge page sizes */
+bool __init __attribute((weak)) arch_hugetlb_valid_size(unsigned long size)
 {
-	parsed_valid_hugepagesz = false;
+	return size == HPAGE_SIZE;
 }
 
 void __init hugetlb_add_hstate(unsigned int order)
@@ -3268,7 +3286,6 @@ void __init hugetlb_add_hstate(unsigned int order)
 	unsigned long i;
 
 	if (size_to_hstate(PAGE_SIZE << order)) {
-		pr_warn("hugepagesz= specified twice, ignoring\n");
 		return;
 	}
 	BUG_ON(hugetlb_max_hstate >= HUGE_MAX_HSTATE);
@@ -3289,20 +3306,29 @@ void __init hugetlb_add_hstate(unsigned int order)
 	parsed_hstate = h;
 }
 
-static int __init hugetlb_nrpages_setup(char *s)
+/*
+ * hugepages command line processing
+ * hugepages normally follows a valid hugepagsz or default_hugepagsz
+ * specification.  If not, ignore the hugepages value.  hugepages can also
+ * be the first huge page command line  option in which case it implicitly
+ * specifies the number of huge pages for the default size.
+ */
+static int __init hugepages_setup(char *s)
 {
 	unsigned long *mhp;
 	static unsigned long *last_mhp;
 
 	if (!parsed_valid_hugepagesz) {
-		pr_warn("hugepages = %s preceded by "
-			"an unsupported hugepagesz, ignoring\n", s);
+		pr_warn("HugeTLB: hugepages=%s does not follow a valid hugepagesz, ignoring\n", s);
 		parsed_valid_hugepagesz = true;
-		return 1;
+		return 0;
 	}
+
 	/*
-	 * !hugetlb_max_hstate means we haven't parsed a hugepagesz= parameter yet,
-	 * so this hugepages= parameter goes to the "default hstate".
+	 * !hugetlb_max_hstate means we haven't parsed a hugepagesz= parameter
+	 * yet, so this hugepages= parameter goes to the "default hstate".
+	 * Otherwise, it goes with the previously parsed hugepagesz or
+	 * default_hugepagesz.
 	 */
 	else if (!hugetlb_max_hstate)
 		mhp = &default_hstate_max_huge_pages;
@@ -3310,8 +3336,8 @@ static int __init hugetlb_nrpages_setup(char *s)
 		mhp = &parsed_hstate->max_huge_pages;
 
 	if (mhp == last_mhp) {
-		pr_warn("hugepages= specified twice without interleaving hugepagesz=, ignoring\n");
-		return 1;
+		pr_warn("HugeTLB: hugepages= specified twice without interleaving hugepagesz=, ignoring hugepages=%s\n", s);
+		return 0;
 	}
 
 	if (sscanf(s, "%lu", mhp) <= 0)
@@ -3329,14 +3355,102 @@ static int __init hugetlb_nrpages_setup(char *s)
 
 	return 1;
 }
-__setup("hugepages=", hugetlb_nrpages_setup);
+__setup("hugepages=", hugepages_setup);
 
-static int __init hugetlb_default_setup(char *s)
+/*
+ * hugepagesz command line processing
+ * A specific huge page size can only be specified once with hugepagesz.
+ * hugepagesz is followed by hugepages on the command line.  The global
+ * variable 'parsed_valid_hugepagesz' is used to determine if prior
+ * hugepagesz argument was valid.
+ */
+static int __init hugepagesz_setup(char *s)
 {
-	default_hstate_size = memparse(s, &s);
+	unsigned long size;
+	struct hstate *h;
+
+	parsed_valid_hugepagesz = false;
+	size = (unsigned long)memparse(s, NULL);
+
+	if (!arch_hugetlb_valid_size(size)) {
+		pr_err("HugeTLB: unsupported hugepagesz=%s\n", s);
+		return 0;
+	}
+
+	h = size_to_hstate(size);
+	if (h) {
+		/*
+		 * hstate for this size already exists.  This is normally
+		 * an error, but is allowed if the existing hstate is the
+		 * default hstate.  More specifically, it is only allowed if
+		 * the number of huge pages for the default hstate was not
+		 * previously specified.
+		 */
+		if (!parsed_default_hugepagesz ||  h != &default_hstate ||
+		    default_hstate.max_huge_pages) {
+			pr_warn("HugeTLB: hugepagesz=%s specified twice, ignoring\n", s);
+			return 0;
+		}
+
+		/*
+		 * No need to call hugetlb_add_hstate() as hstate already
+		 * exists.  But, do set parsed_hstate so that a following
+		 * hugepages= parameter will be applied to this hstate.
+		 */
+		parsed_hstate = h;
+		parsed_valid_hugepagesz = true;
+		return 1;
+	}
+
+	hugetlb_add_hstate(ilog2(size) - PAGE_SHIFT);
+	parsed_valid_hugepagesz = true;
 	return 1;
 }
-__setup("default_hugepagesz=", hugetlb_default_setup);
+__setup("hugepagesz=", hugepagesz_setup);
+
+/*
+ * default_hugepagesz command line input
+ * Only one instance of default_hugepagesz allowed on command line.
+ */
+static int __init default_hugepagesz_setup(char *s)
+{
+	unsigned long size;
+
+	parsed_valid_hugepagesz = false;
+	if (parsed_default_hugepagesz) {
+		pr_err("HugeTLB: default_hugepagesz previously specified, ignoring %s\n", s);
+		return 0;
+	}
+
+	size = (unsigned long)memparse(s, NULL);
+
+	if (!arch_hugetlb_valid_size(size)) {
+		pr_err("HugeTLB: unsupported default_hugepagesz=%s\n", s);
+		return 0;
+	}
+
+	hugetlb_add_hstate(ilog2(size) - PAGE_SHIFT);
+	parsed_valid_hugepagesz = true;
+	parsed_default_hugepagesz = true;
+	default_hstate_idx = hstate_index(size_to_hstate(size));
+
+	/*
+	 * The number of default huge pages (for this size) could have been
+	 * specified as the first hugetlb parameter: hugepages=X.  If so,
+	 * then default_hstate_max_huge_pages is set.  If the default huge
+	 * page size is gigantic (>= MAX_ORDER), then the pages must be
+	 * allocated here from bootmem allocator.
+	 */
+	if (default_hstate_max_huge_pages) {
+		default_hstate.max_huge_pages = default_hstate_max_huge_pages;
+		if (hstate_is_gigantic(&default_hstate))
+			hugetlb_hstate_alloc_pages(&default_hstate);
+		default_hstate_max_huge_pages = 0;
+	}
+
+	return 1;
+}
+__setup("default_hugepagesz=", default_hugepagesz_setup);
 
 static unsigned int cpuset_mems_nr(unsigned int *array)
 {
@@ -3352,7 +3466,7 @@ static unsigned int cpuset_mems_nr(unsigned int *array)
 #ifdef CONFIG_SYSCTL
 static int hugetlb_sysctl_handler_common(bool obey_mempolicy,
 			 struct ctl_table *table, int write,
-			 void __user *buffer, size_t *length, loff_t *ppos)
+			 void *buffer, size_t *length, loff_t *ppos)
 {
 	struct hstate *h = &default_hstate;
 	unsigned long tmp = h->max_huge_pages;
@@ -3375,7 +3489,7 @@ static int hugetlb_sysctl_handler_common(bool obey_mempolicy,
 }
 
 int hugetlb_sysctl_handler(struct ctl_table *table, int write,
-			  void __user *buffer, size_t *length, loff_t *ppos)
+			  void *buffer, size_t *length, loff_t *ppos)
 {
 
 	return hugetlb_sysctl_handler_common(false, table, write,
@@ -3384,7 +3498,7 @@ int hugetlb_sysctl_handler(struct ctl_table *table, int write,
 
 #ifdef CONFIG_NUMA
 int hugetlb_mempolicy_sysctl_handler(struct ctl_table *table, int write,
-			  void __user *buffer, size_t *length, loff_t *ppos)
+			  void *buffer, size_t *length, loff_t *ppos)
 {
 	return hugetlb_sysctl_handler_common(true, table, write,
 							buffer, length, ppos);
@@ -3392,8 +3506,7 @@ int hugetlb_mempolicy_sysctl_handler(struct ctl_table *table, int write,
 #endif /* CONFIG_NUMA */
 
 int hugetlb_overcommit_handler(struct ctl_table *table, int write,
-			void __user *buffer,
-			size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
 	struct hstate *h = &default_hstate;
 	unsigned long tmp;
@@ -4466,9 +4579,9 @@ vm_fault_t hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	/*
 	 * entry could be a migration/hwpoison entry at this point, so this
 	 * check prevents the kernel from going below assuming that we have
-	 * a active hugepage in pagecache. This goto expects the 2nd page fault,
-	 * and is_hugetlb_entry_(migration|hwpoisoned) check will properly
-	 * handle it.
+	 * an active hugepage in pagecache. This goto expects the 2nd page
+	 * fault, and is_hugetlb_entry_(migration|hwpoisoned) check will
+	 * properly handle it.
 	 */
 	if (!pte_present(entry))
 		goto out_mutex;
@@ -5355,8 +5468,8 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
  * huge_pte_offset() - Walk the page table to resolve the hugepage
  * entry at address @addr
  *
- * Return: Pointer to page table or swap entry (PUD or PMD) for
- * address @addr, or NULL if a p*d_none() entry is encountered and the
+ * Return: Pointer to page table entry (PUD or PMD) for
+ * address @addr, or NULL if a !p*d_present() entry is encountered and the
  * size @sz doesn't match the hugepage size at this level of the page
  * table.
  */
@@ -5365,8 +5478,8 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 {
 	pgd_t *pgd;
 	p4d_t *p4d;
-	pud_t *pud, pud_entry;
-	pmd_t *pmd, pmd_entry;
+	pud_t *pud;
+	pmd_t *pmd;
 
 	pgd = pgd_offset(mm, addr);
 	if (!pgd_present(*pgd))
@@ -5376,22 +5489,16 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 		return NULL;
 
 	pud = pud_offset(p4d, addr);
-	pud_entry = READ_ONCE(*pud);
-	if (sz != PUD_SIZE && pud_none(pud_entry))
-		return NULL;
-	/* hugepage or swap? */
-	if (pud_huge(pud_entry) || !pud_present(pud_entry))
+	if (sz == PUD_SIZE)
+		/* must be pud huge, non-present or none */
 		return (pte_t *)pud;
-
-	pmd = pmd_offset(pud, addr);
-	pmd_entry = READ_ONCE(*pmd);
-	if (sz != PMD_SIZE && pmd_none(pmd_entry))
+	if (!pud_present(*pud))
 		return NULL;
-	/* hugepage or swap? */
-	if (pmd_huge(pmd_entry) || !pmd_present(pmd_entry))
-		return (pte_t *)pmd;
+	/* must have a valid entry and size to go further */
 
-	return NULL;
+	pmd = pmd_offset(pud, addr);
+	/* must be pmd huge, non-present or none */
+	return (pte_t *)pmd;
 }
 
 #endif /* CONFIG_ARCH_WANT_GENERAL_HUGETLB */
diff --git a/mm/internal.h b/mm/internal.h
index b5634e78f01d..791e4b5a807c 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -49,18 +49,20 @@ void unmap_page_range(struct mmu_gather *tlb,
 			     unsigned long addr, unsigned long end,
 			     struct zap_details *details);
 
-extern unsigned int __do_page_cache_readahead(struct address_space *mapping,
-		struct file *filp, pgoff_t offset, unsigned long nr_to_read,
+void force_page_cache_readahead(struct address_space *, struct file *,
+		pgoff_t index, unsigned long nr_to_read);
+void __do_page_cache_readahead(struct address_space *, struct file *,
+		pgoff_t index, unsigned long nr_to_read,
 		unsigned long lookahead_size);
 
 /*
  * Submit IO for the read-ahead request in file_ra_state.
  */
-static inline unsigned long ra_submit(struct file_ra_state *ra,
+static inline void ra_submit(struct file_ra_state *ra,
 		struct address_space *mapping, struct file *filp)
 {
-	return __do_page_cache_readahead(mapping, filp,
-					ra->start, ra->size, ra->async_size);
+	__do_page_cache_readahead(mapping, filp,
+			ra->start, ra->size, ra->async_size);
 }
 
 /**
@@ -125,12 +127,12 @@ extern pmd_t *mm_find_pmd(struct mm_struct *mm, unsigned long address);
  * between functions involved in allocations, including the alloc_pages*
  * family of functions.
  *
- * nodemask, migratetype and high_zoneidx are initialized only once in
+ * nodemask, migratetype and highest_zoneidx are initialized only once in
  * __alloc_pages_nodemask() and then never change.
  *
- * zonelist, preferred_zone and classzone_idx are set first in
+ * zonelist, preferred_zone and highest_zoneidx are set first in
  * __alloc_pages_nodemask() for the fast path, and might be later changed
- * in __alloc_pages_slowpath(). All other functions pass the whole strucure
+ * in __alloc_pages_slowpath(). All other functions pass the whole structure
  * by a const pointer.
  */
 struct alloc_context {
@@ -138,12 +140,21 @@ struct alloc_context {
 	nodemask_t *nodemask;
 	struct zoneref *preferred_zoneref;
 	int migratetype;
-	enum zone_type high_zoneidx;
+
+	/*
+	 * highest_zoneidx represents highest usable zone index of
+	 * the allocation request. Due to the nature of the zone,
+	 * memory on lower zone than the highest_zoneidx will be
+	 * protected by lowmem_reserve[highest_zoneidx].
+	 *
+	 * highest_zoneidx is also used by reclaim/compaction to limit
+	 * the target zone since higher zone than this index cannot be
+	 * usable for this allocation request.
+	 */
+	enum zone_type highest_zoneidx;
 	bool spread_dirty_pages;
 };
 
-#define ac_classzone_idx(ac) zonelist_zone_idx(ac->preferred_zoneref)
-
 /*
  * Locate the struct page for both the matching buddy in our
  * pair (buddy1) and the combined O(n+1) page they form (page).
@@ -222,7 +233,7 @@ struct compact_control {
 	int order;			/* order a direct compactor needs */
 	int migratetype;		/* migratetype of direct compactor */
 	const unsigned int alloc_flags;	/* alloc flags of a direct compactor */
-	const int classzone_idx;	/* zone index of a direct compactor */
+	const int highest_zoneidx;	/* zone index of a direct compactor */
 	enum migrate_mode mode;		/* Async or sync migration mode */
 	bool ignore_skip_hint;		/* Scan blocks even if marked skip */
 	bool no_set_skip_hint;		/* Don't mark blocks for skipping */
@@ -527,7 +538,7 @@ extern unsigned long  __must_check vm_mmap_pgoff(struct file *, unsigned long,
         unsigned long, unsigned long);
 
 extern void set_pageblock_order(void);
-unsigned long reclaim_clean_pages_from_list(struct zone *zone,
+unsigned int reclaim_clean_pages_from_list(struct zone *zone,
 					    struct list_head *page_list);
 /* The ALLOC_WMARK bits are used as an index to zone->watermark */
 #define ALLOC_WMARK_MIN		WMARK_MIN
diff --git a/mm/kasan/init.c b/mm/kasan/init.c
index ce45c491ebcd..fe6be0be1f76 100644
--- a/mm/kasan/init.c
+++ b/mm/kasan/init.c
@@ -250,20 +250,9 @@ int __ref kasan_populate_early_shadow(const void *shadow_start,
 			 * 3,2 - level page tables where we don't have
 			 * puds,pmds, so pgd_populate(), pud_populate()
 			 * is noops.
-			 *
-			 * The ifndef is required to avoid build breakage.
-			 *
-			 * With 5level-fixup.h, pgd_populate() is not nop and
-			 * we reference kasan_early_shadow_p4d. It's not defined
-			 * unless 5-level paging enabled.
-			 *
-			 * The ifndef can be dropped once all KASAN-enabled
-			 * architectures will switch to pgtable-nop4d.h.
 			 */
-#ifndef __ARCH_HAS_5LEVEL_HACK
 			pgd_populate(&init_mm, pgd,
 					lm_alias(kasan_early_shadow_p4d));
-#endif
 			p4d = p4d_offset(pgd, addr);
 			p4d_populate(&init_mm, p4d,
 					lm_alias(kasan_early_shadow_pud));
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 99d77ffb79c2..c131a90b3ebb 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -28,6 +28,8 @@ enum scan_result {
 	SCAN_SUCCEED,
 	SCAN_PMD_NULL,
 	SCAN_EXCEED_NONE_PTE,
+	SCAN_EXCEED_SWAP_PTE,
+	SCAN_EXCEED_SHARED_PTE,
 	SCAN_PTE_NON_PRESENT,
 	SCAN_PTE_UFFD_WP,
 	SCAN_PAGE_RO,
@@ -47,7 +49,6 @@ enum scan_result {
 	SCAN_DEL_PAGE_LRU,
 	SCAN_ALLOC_HUGE_PAGE_FAIL,
 	SCAN_CGROUP_CHARGE_FAIL,
-	SCAN_EXCEED_SWAP_PTE,
 	SCAN_TRUNCATED,
 	SCAN_PAGE_HAS_PRIVATE,
 };
@@ -72,6 +73,7 @@ static DECLARE_WAIT_QUEUE_HEAD(khugepaged_wait);
  */
 static unsigned int khugepaged_max_ptes_none __read_mostly;
 static unsigned int khugepaged_max_ptes_swap __read_mostly;
+static unsigned int khugepaged_max_ptes_shared __read_mostly;
 
 #define MM_SLOTS_HASH_BITS 10
 static __read_mostly DEFINE_HASHTABLE(mm_slots_hash, MM_SLOTS_HASH_BITS);
@@ -291,15 +293,43 @@ static struct kobj_attribute khugepaged_max_ptes_swap_attr =
 	__ATTR(max_ptes_swap, 0644, khugepaged_max_ptes_swap_show,
 	       khugepaged_max_ptes_swap_store);
 
+static ssize_t khugepaged_max_ptes_shared_show(struct kobject *kobj,
+					     struct kobj_attribute *attr,
+					     char *buf)
+{
+	return sprintf(buf, "%u\n", khugepaged_max_ptes_shared);
+}
+
+static ssize_t khugepaged_max_ptes_shared_store(struct kobject *kobj,
+					      struct kobj_attribute *attr,
+					      const char *buf, size_t count)
+{
+	int err;
+	unsigned long max_ptes_shared;
+
+	err  = kstrtoul(buf, 10, &max_ptes_shared);
+	if (err || max_ptes_shared > HPAGE_PMD_NR-1)
+		return -EINVAL;
+
+	khugepaged_max_ptes_shared = max_ptes_shared;
+
+	return count;
+}
+
+static struct kobj_attribute khugepaged_max_ptes_shared_attr =
+	__ATTR(max_ptes_shared, 0644, khugepaged_max_ptes_shared_show,
+	       khugepaged_max_ptes_shared_store);
+
 static struct attribute *khugepaged_attr[] = {
 	&khugepaged_defrag_attr.attr,
 	&khugepaged_max_ptes_none_attr.attr,
+	&khugepaged_max_ptes_swap_attr.attr,
+	&khugepaged_max_ptes_shared_attr.attr,
 	&pages_to_scan_attr.attr,
 	&pages_collapsed_attr.attr,
 	&full_scans_attr.attr,
 	&scan_sleep_millisecs_attr.attr,
 	&alloc_sleep_millisecs_attr.attr,
-	&khugepaged_max_ptes_swap_attr.attr,
 	NULL,
 };
 
@@ -309,6 +339,21 @@ struct attribute_group khugepaged_attr_group = {
 };
 #endif /* CONFIG_SYSFS */
 
+static inline bool exceed_max_ptes_none(unsigned int *nr_ptes)
+{
+	return (++(*nr_ptes) > khugepaged_max_ptes_none);
+}
+
+static inline bool exceed_max_ptes_swap(unsigned int *nr_ptes)
+{
+	return (++(*nr_ptes) > khugepaged_max_ptes_swap);
+}
+
+static inline bool exceed_max_ptes_shared(unsigned int *nr_ptes)
+{
+	return (++(*nr_ptes) > khugepaged_max_ptes_shared);
+}
+
 int hugepage_madvise(struct vm_area_struct *vma,
 		     unsigned long *vm_flags, int advice)
 {
@@ -359,6 +404,7 @@ int __init khugepaged_init(void)
 	khugepaged_pages_to_scan = HPAGE_PMD_NR * 8;
 	khugepaged_max_ptes_none = HPAGE_PMD_NR - 1;
 	khugepaged_max_ptes_swap = HPAGE_PMD_NR / 8;
+	khugepaged_max_ptes_shared = HPAGE_PMD_NR / 2;
 
 	return 0;
 }
@@ -512,27 +558,70 @@ void __khugepaged_exit(struct mm_struct *mm)
 
 static void release_pte_page(struct page *page)
 {
-	dec_node_page_state(page, NR_ISOLATED_ANON + page_is_file_lru(page));
+	mod_node_page_state(page_pgdat(page),
+		NR_ISOLATED_ANON + page_is_file_lru(page), -compound_nr(page));
+	ClearPageActive(page);
+	ClearPageUnevictable(page);
+	unlock_page(page);
+	/* Drop refcount from isolate */
+	put_page(page);
+}
+
+static void release_pte_page_to_lru(struct page *page)
+{
+	mod_node_page_state(page_pgdat(page),
+			NR_ISOLATED_ANON + page_is_file_lru(page),
+			-compound_nr(page));
 	unlock_page(page);
 	putback_lru_page(page);
 }
 
-static void release_pte_pages(pte_t *pte, pte_t *_pte)
+static void release_pte_pages(pte_t *pte, pte_t *_pte,
+		struct list_head *compound_pagelist)
 {
+	struct page *page, *tmp;
+
 	while (--_pte >= pte) {
 		pte_t pteval = *_pte;
-		if (!pte_none(pteval) && !is_zero_pfn(pte_pfn(pteval)))
-			release_pte_page(pte_page(pteval));
+
+		page = pte_page(pteval);
+		if (!pte_none(pteval) && !is_zero_pfn(pte_pfn(pteval)) &&
+				!PageCompound(page))
+			release_pte_page_to_lru(page);
+	}
+
+	list_for_each_entry_safe(page, tmp, compound_pagelist, lru) {
+		list_del(&page->lru);
+		release_pte_page_to_lru(page);
+	}
+}
+
+static bool is_refcount_suitable(struct page *page)
+{
+	int expected_refcount, refcount;
+
+	refcount = page_count(page);
+	expected_refcount = total_mapcount(page);
+	if (PageSwapCache(page))
+		expected_refcount += compound_nr(page);
+
+	if (IS_ENABLED(CONFIG_DEBUG_VM) && expected_refcount > refcount) {
+		pr_err("expected_refcount (%d) > refcount (%d)\n",
+				expected_refcount, refcount);
+		dump_page(page, "Unexpected refcount");
 	}
+
+	return page_count(page) == expected_refcount;
 }
 
 static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 					unsigned long address,
-					pte_t *pte)
+					pte_t *pte,
+					struct list_head *compound_pagelist)
 {
 	struct page *page = NULL;
 	pte_t *_pte;
-	int none_or_zero = 0, result = 0, referenced = 0;
+	int none_or_zero = 0, shared = 0, result = 0, referenced = 0;
 	bool writable = false;
 
 	for (_pte = pte; _pte < pte+HPAGE_PMD_NR;
@@ -541,7 +630,7 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 		if (pte_none(pteval) || (pte_present(pteval) &&
 				is_zero_pfn(pte_pfn(pteval)))) {
 			if (!userfaultfd_armed(vma) &&
-			    ++none_or_zero <= khugepaged_max_ptes_none) {
+			    !exceed_max_ptes_none(&none_or_zero)) {
 				continue;
 			} else {
 				result = SCAN_EXCEED_NONE_PTE;
@@ -558,13 +647,27 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 			goto out;
 		}
 
-		/* TODO: teach khugepaged to collapse THP mapped with pte */
-		if (PageCompound(page)) {
-			result = SCAN_PAGE_COMPOUND;
+		VM_BUG_ON_PAGE(!PageAnon(page), page);
+
+		if (page_mapcount(page) > 1 &&
+				exceed_max_ptes_shared(&shared)) {
+			result = SCAN_EXCEED_SHARED_PTE;
 			goto out;
 		}
 
-		VM_BUG_ON_PAGE(!PageAnon(page), page);
+		if (PageCompound(page)) {
+			struct page *p;
+			page = compound_head(page);
+
+			/*
+			 * Check if we have dealt with the compound page
+			 * already
+			 */
+			list_for_each_entry(p, compound_pagelist, lru) {
+				if (page == p)
+					goto next;
+			}
+		}
 
 		/*
 		 * We can do it before isolate_lru_page because the
@@ -578,28 +681,30 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 		}
 
 		/*
-		 * cannot use mapcount: can't collapse if there's a gup pin.
-		 * The page must only be referenced by the scanned process
-		 * and page swap cache.
+		 * Check if the page has any GUP (or other external) pins.
+		 *
+		 * The page table that maps the page has been already unlinked
+		 * from the page table tree and this process cannot get
+		 * an additinal pin on the page.
+		 *
+		 * New pins can come later if the page is shared across fork,
+		 * but not from this process. The other process cannot write to
+		 * the page, only trigger CoW.
 		 */
-		if (page_count(page) != 1 + PageSwapCache(page)) {
+		if (!is_refcount_suitable(page)) {
 			unlock_page(page);
 			result = SCAN_PAGE_COUNT;
 			goto out;
 		}
-		if (pte_write(pteval)) {
-			writable = true;
-		} else {
-			if (PageSwapCache(page) &&
-			    !reuse_swap_page(page, NULL)) {
-				unlock_page(page);
-				result = SCAN_SWAP_CACHE_PAGE;
-				goto out;
-			}
+		if (!pte_write(pteval) && PageSwapCache(page) &&
+				!reuse_swap_page(page, NULL)) {
 			/*
-			 * Page is not in the swap cache. It can be collapsed
-			 * into a THP.
+			 * Page is in the swap cache and cannot be re-used.
+			 * It cannot be collapsed into a THP.
 			 */
+			unlock_page(page);
+			result = SCAN_SWAP_CACHE_PAGE;
+			goto out;
 		}
 
 		/*
@@ -611,16 +716,23 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 			result = SCAN_DEL_PAGE_LRU;
 			goto out;
 		}
-		inc_node_page_state(page,
-				NR_ISOLATED_ANON + page_is_file_lru(page));
+		mod_node_page_state(page_pgdat(page),
+				NR_ISOLATED_ANON + page_is_file_lru(page),
+				compound_nr(page));
 		VM_BUG_ON_PAGE(!PageLocked(page), page);
 		VM_BUG_ON_PAGE(PageLRU(page), page);
 
+		if (PageCompound(page))
+			list_add_tail(&page->lru, compound_pagelist);
+next:
 		/* There should be enough young pte to collapse the page */
 		if (pte_young(pteval) ||
 		    page_is_young(page) || PageReferenced(page) ||
 		    mmu_notifier_test_young(vma->vm_mm, address))
 			referenced++;
+
+		if (pte_write(pteval))
+			writable = true;
 	}
 	if (likely(writable)) {
 		if (likely(referenced)) {
@@ -634,7 +746,7 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 	}
 
 out:
-	release_pte_pages(pte, _pte);
+	release_pte_pages(pte, _pte, compound_pagelist);
 	trace_mm_collapse_huge_page_isolate(page, none_or_zero,
 					    referenced, writable, result);
 	return 0;
@@ -643,13 +755,14 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
 static void __collapse_huge_page_copy(pte_t *pte, struct page *page,
 				      struct vm_area_struct *vma,
 				      unsigned long address,
-				      spinlock_t *ptl)
+				      spinlock_t *ptl,
+				      struct list_head *compound_pagelist)
 {
+	struct page *src_page, *tmp;
 	pte_t *_pte;
 	for (_pte = pte; _pte < pte + HPAGE_PMD_NR;
 				_pte++, page++, address += PAGE_SIZE) {
 		pte_t pteval = *_pte;
-		struct page *src_page;
 
 		if (pte_none(pteval) || is_zero_pfn(pte_pfn(pteval))) {
 			clear_user_highpage(page, address);
@@ -669,8 +782,8 @@ static void __collapse_huge_page_copy(pte_t *pte, struct page *page,
 		} else {
 			src_page = pte_page(pteval);
 			copy_user_highpage(page, src_page, address, vma);
-			VM_BUG_ON_PAGE(page_mapcount(src_page) != 1, src_page);
-			release_pte_page(src_page);
+			if (!PageCompound(src_page))
+				release_pte_page(src_page);
 			/*
 			 * ptl mostly unnecessary, but preempt has to
 			 * be disabled to update the per-cpu stats
@@ -687,6 +800,11 @@ static void __collapse_huge_page_copy(pte_t *pte, struct page *page,
 			free_page_and_swap_cache(src_page);
 		}
 	}
+
+	list_for_each_entry_safe(src_page, tmp, compound_pagelist, lru) {
+		list_del(&src_page->lru);
+		release_pte_page(src_page);
+	}
 }
 
 static void khugepaged_alloc_sleep(void)
@@ -899,11 +1017,6 @@ static bool __collapse_huge_page_swapin(struct mm_struct *mm,
 		.pgoff = linear_page_index(vma, address),
 	};
 
-	/* we only decide to swapin, if there is enough young ptes */
-	if (referenced < HPAGE_PMD_NR/2) {
-		trace_mm_collapse_huge_page_swapin(mm, swapped_in, referenced, 0);
-		return false;
-	}
 	vmf.pte = pte_offset_map(pmd, address);
 	for (; vmf.address < address + HPAGE_PMD_NR*PAGE_SIZE;
 			vmf.pte++, vmf.address += PAGE_SIZE) {
@@ -936,6 +1049,11 @@ static bool __collapse_huge_page_swapin(struct mm_struct *mm,
 	}
 	vmf.pte--;
 	pte_unmap(vmf.pte);
+
+	/* Drain LRU add pagevec to remove extra pin on the swapped in pages */
+	if (swapped_in)
+		lru_add_drain();
+
 	trace_mm_collapse_huge_page_swapin(mm, swapped_in, referenced, 1);
 	return true;
 }
@@ -943,8 +1061,9 @@ static bool __collapse_huge_page_swapin(struct mm_struct *mm,
 static void collapse_huge_page(struct mm_struct *mm,
 				   unsigned long address,
 				   struct page **hpage,
-				   int node, int referenced)
+				   int node, int referenced, int unmapped)
 {
+	LIST_HEAD(compound_pagelist);
 	pmd_t *pmd, _pmd;
 	pte_t *pte;
 	pgtable_t pgtable;
@@ -1000,7 +1119,8 @@ static void collapse_huge_page(struct mm_struct *mm,
 	 * If it fails, we release mmap_sem and jump out_nolock.
 	 * Continuing to collapse causes inconsistency.
 	 */
-	if (!__collapse_huge_page_swapin(mm, vma, address, pmd, referenced)) {
+	if (unmapped && !__collapse_huge_page_swapin(mm, vma, address,
+				pmd, referenced)) {
 		mem_cgroup_cancel_charge(new_page, memcg, true);
 		up_read(&mm->mmap_sem);
 		goto out_nolock;
@@ -1044,7 +1164,8 @@ static void collapse_huge_page(struct mm_struct *mm,
 	mmu_notifier_invalidate_range_end(&range);
 
 	spin_lock(pte_ptl);
-	isolated = __collapse_huge_page_isolate(vma, address, pte);
+	isolated = __collapse_huge_page_isolate(vma, address, pte,
+			&compound_pagelist);
 	spin_unlock(pte_ptl);
 
 	if (unlikely(!isolated)) {
@@ -1069,7 +1190,8 @@ static void collapse_huge_page(struct mm_struct *mm,
 	 */
 	anon_vma_unlock_write(vma->anon_vma);
 
-	__collapse_huge_page_copy(pte, new_page, vma, address, pte_ptl);
+	__collapse_huge_page_copy(pte, new_page, vma, address, pte_ptl,
+			&compound_pagelist);
 	pte_unmap(pte);
 	__SetPageUptodate(new_page);
 	pgtable = pmd_pgtable(_pmd);
@@ -1116,7 +1238,8 @@ static int khugepaged_scan_pmd(struct mm_struct *mm,
 {
 	pmd_t *pmd;
 	pte_t *pte, *_pte;
-	int ret = 0, none_or_zero = 0, result = 0, referenced = 0;
+	int ret = 0, result = 0, referenced = 0;
+	int none_or_zero = 0, shared = 0;
 	struct page *page = NULL;
 	unsigned long _address;
 	spinlock_t *ptl;
@@ -1137,7 +1260,7 @@ static int khugepaged_scan_pmd(struct mm_struct *mm,
 	     _pte++, _address += PAGE_SIZE) {
 		pte_t pteval = *_pte;
 		if (is_swap_pte(pteval)) {
-			if (++unmapped <= khugepaged_max_ptes_swap) {
+			if (!exceed_max_ptes_swap(&unmapped)) {
 				/*
 				 * Always be strict with uffd-wp
 				 * enabled swap entries.  Please see
@@ -1155,7 +1278,7 @@ static int khugepaged_scan_pmd(struct mm_struct *mm,
 		}
 		if (pte_none(pteval) || is_zero_pfn(pte_pfn(pteval))) {
 			if (!userfaultfd_armed(vma) &&
-			    ++none_or_zero <= khugepaged_max_ptes_none) {
+			    !exceed_max_ptes_none(&none_or_zero)) {
 				continue;
 			} else {
 				result = SCAN_EXCEED_NONE_PTE;
@@ -1188,12 +1311,14 @@ static int khugepaged_scan_pmd(struct mm_struct *mm,
 			goto out_unmap;
 		}
 
-		/* TODO: teach khugepaged to collapse THP mapped with pte */
-		if (PageCompound(page)) {
-			result = SCAN_PAGE_COMPOUND;
+		if (page_mapcount(page) > 1 &&
+				exceed_max_ptes_shared(&shared)) {
+			result = SCAN_EXCEED_SHARED_PTE;
 			goto out_unmap;
 		}
 
+		page = compound_head(page);
+
 		/*
 		 * Record which node the original page is from and save this
 		 * information to khugepaged_node_load[].
@@ -1219,12 +1344,8 @@ static int khugepaged_scan_pmd(struct mm_struct *mm,
 			goto out_unmap;
 		}
 
-		/*
-		 * cannot use mapcount: can't collapse if there's a gup pin.
-		 * The page must only be referenced by the scanned process
-		 * and page swap cache.
-		 */
-		if (page_count(page) != 1 + PageSwapCache(page)) {
+		/* Check if the page has any GUP (or other external) pins */
+		if (!is_refcount_suitable(page)) {
 			result = SCAN_PAGE_COUNT;
 			goto out_unmap;
 		}
@@ -1233,22 +1354,21 @@ static int khugepaged_scan_pmd(struct mm_struct *mm,
 		    mmu_notifier_test_young(vma->vm_mm, address))
 			referenced++;
 	}
-	if (writable) {
-		if (referenced) {
-			result = SCAN_SUCCEED;
-			ret = 1;
-		} else {
-			result = SCAN_LACK_REFERENCED_PAGE;
-		}
-	} else {
+	if (!writable) {
 		result = SCAN_PAGE_RO;
+	} else if (!referenced || (unmapped && referenced < HPAGE_PMD_NR/2)) {
+		result = SCAN_LACK_REFERENCED_PAGE;
+	} else {
+		result = SCAN_SUCCEED;
+		ret = 1;
 	}
 out_unmap:
 	pte_unmap_unlock(pte, ptl);
 	if (ret) {
 		node = khugepaged_find_target_node();
 		/* collapse_huge_page will return with the mmap_sem released */
-		collapse_huge_page(mm, address, hpage, node, referenced);
+		collapse_huge_page(mm, address, hpage, node,
+				referenced, unmapped);
 	}
 out:
 	trace_mm_khugepaged_scan_pmd(mm, page, writable, referenced,
@@ -1867,7 +1987,7 @@ static void khugepaged_scan_file(struct mm_struct *mm,
 			continue;
 
 		if (xa_is_value(page)) {
-			if (++swap > khugepaged_max_ptes_swap) {
+			if (exceed_max_ptes_swap(&swap)) {
 				result = SCAN_EXCEED_SWAP_PTE;
 				break;
 			}
@@ -2083,6 +2203,8 @@ static void khugepaged_do_scan(void)
 
 	barrier(); /* write khugepaged_pages_to_scan to local stack */
 
+	lru_add_drain_all();
+
 	while (progress < pages) {
 		if (!khugepaged_prealloc_page(&hpage, &wait))
 			break;
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index e362dc3d2028..5e252d91eb14 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1169,8 +1169,10 @@ static bool update_checksum(struct kmemleak_object *object)
 	u32 old_csum = object->checksum;
 
 	kasan_disable_current();
+	kcsan_disable_current();
 	object->checksum = crc32(0, (void *)object->pointer, object->size);
 	kasan_enable_current();
+	kcsan_enable_current();
 
 	return object->checksum != old_csum;
 }
diff --git a/mm/ksm.c b/mm/ksm.c
index 281c00129a2e..18c5d005bd01 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -612,7 +612,7 @@ static struct stable_node *alloc_stable_node_chain(struct stable_node *dup,
 		 * Move the old stable node to the second dimension
 		 * queued in the hlist_dup. The invariant is that all
 		 * dup stable_nodes in the chain->hlist point to pages
-		 * that are wrprotected and have the exact same
+		 * that are write protected and have the exact same
 		 * content.
 		 */
 		stable_node_chain_add_dup(dup, chain);
@@ -1148,7 +1148,7 @@ static int replace_page(struct vm_area_struct *vma, struct page *page,
 
 	/*
 	 * No need to check ksm_use_zero_pages here: we can only have a
-	 * zero_page here if ksm_use_zero_pages was enabled alreaady.
+	 * zero_page here if ksm_use_zero_pages was enabled already.
 	 */
 	if (!is_zero_pfn(page_to_pfn(kpage))) {
 		get_page(kpage);
@@ -1608,7 +1608,7 @@ static struct page *stable_tree_search(struct page *page)
 			 * continue. All KSM pages belonging to the
 			 * stable_node dups in a stable_node chain
 			 * have the same content and they're
-			 * wrprotected at all times. Any will work
+			 * write protected at all times. Any will work
 			 * fine to continue the walk.
 			 */
 			tree_page = get_ksm_page(stable_node_any,
@@ -1843,7 +1843,7 @@ static struct stable_node *stable_tree_insert(struct page *kpage)
 			 * continue. All KSM pages belonging to the
 			 * stable_node dups in a stable_node chain
 			 * have the same content and they're
-			 * wrprotected at all times. Any will work
+			 * write protected at all times. Any will work
 			 * fine to continue the walk.
 			 */
 			tree_page = get_ksm_page(stable_node_any,
@@ -2001,7 +2001,7 @@ static void stable_tree_append(struct rmap_item *rmap_item,
 	 * duplicate. page_migration could break later if rmap breaks,
 	 * so we can as well crash here. We really need to check for
 	 * rmap_hlist_len == STABLE_NODE_CHAIN, but we can as well check
-	 * for other negative values as an undeflow if detected here
+	 * for other negative values as an underflow if detected here
 	 * for the first time (and not when decreasing rmap_hlist_len)
 	 * would be sign of memory corruption in the stable_node.
 	 */
diff --git a/mm/list_lru.c b/mm/list_lru.c
index 4d5294c39bba..dbff67afe197 100644
--- a/mm/list_lru.c
+++ b/mm/list_lru.c
@@ -180,7 +180,7 @@ unsigned long list_lru_count_one(struct list_lru *lru,
 
 	rcu_read_lock();
 	l = list_lru_from_memcg_idx(nlru, memcg_cache_id(memcg));
-	count = l->nr_items;
+	count = READ_ONCE(l->nr_items);
 	rcu_read_unlock();
 
 	return count;
@@ -213,7 +213,7 @@ __list_lru_walk_one(struct list_lru_node *nlru, int memcg_idx,
 
 		/*
 		 * decrement nr_to_walk first so that we don't livelock if we
-		 * get stuck on large numbesr of LRU_RETRY items
+		 * get stuck on large numbers of LRU_RETRY items
 		 */
 		if (!*nr_to_walk)
 			break;
diff --git a/mm/madvise.c b/mm/madvise.c
index 8cbd8c1bfe15..d7f4f1dc6076 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -17,17 +17,20 @@
 #include <linux/falloc.h>
 #include <linux/fadvise.h>
 #include <linux/sched.h>
+#include <linux/sched/mm.h>
 #include <linux/ksm.h>
 #include <linux/fs.h>
 #include <linux/file.h>
 #include <linux/blkdev.h>
 #include <linux/backing-dev.h>
+#include <linux/compat.h>
 #include <linux/pagewalk.h>
 #include <linux/swap.h>
 #include <linux/swapops.h>
 #include <linux/shmem_fs.h>
 #include <linux/mmu_notifier.h>
 #include <linux/sched/mm.h>
+#include <linux/uio.h>
 
 #include <asm/tlb.h>
 
@@ -36,6 +39,7 @@
 struct madvise_walk_private {
 	struct mmu_gather *tlb;
 	bool pageout;
+	struct task_struct *target_task;
 };
 
 /*
@@ -255,6 +259,7 @@ static long madvise_willneed(struct vm_area_struct *vma,
 			     struct vm_area_struct **prev,
 			     unsigned long start, unsigned long end)
 {
+	struct mm_struct *mm = vma->vm_mm;
 	struct file *file = vma->vm_file;
 	loff_t offset;
 
@@ -289,12 +294,12 @@ static long madvise_willneed(struct vm_area_struct *vma,
 	 */
 	*prev = NULL;	/* tell sys_madvise we drop mmap_sem */
 	get_file(file);
-	up_read(&current->mm->mmap_sem);
+	up_read(&mm->mmap_sem);
 	offset = (loff_t)(start - vma->vm_start)
 			+ ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
 	vfs_fadvise(file, offset, end - start, POSIX_FADV_WILLNEED);
 	fput(file);
-	down_read(&current->mm->mmap_sem);
+	down_read(&mm->mmap_sem);
 	return 0;
 }
 
@@ -315,6 +320,10 @@ static int madvise_cold_or_pageout_pte_range(pmd_t *pmd,
 	if (fatal_signal_pending(current))
 		return -EINTR;
 
+	if (private->target_task &&
+			fatal_signal_pending(private->target_task))
+		return -EINTR;
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	if (pmd_trans_huge(*pmd)) {
 		pmd_t orig_pmd;
@@ -476,12 +485,14 @@ static const struct mm_walk_ops cold_walk_ops = {
 };
 
 static void madvise_cold_page_range(struct mmu_gather *tlb,
+			     struct task_struct *task,
 			     struct vm_area_struct *vma,
 			     unsigned long addr, unsigned long end)
 {
 	struct madvise_walk_private walk_private = {
 		.pageout = false,
 		.tlb = tlb,
+		.target_task = task,
 	};
 
 	tlb_start_vma(tlb, vma);
@@ -489,7 +500,8 @@ static void madvise_cold_page_range(struct mmu_gather *tlb,
 	tlb_end_vma(tlb, vma);
 }
 
-static long madvise_cold(struct vm_area_struct *vma,
+static long madvise_cold(struct task_struct *task,
+			struct vm_area_struct *vma,
 			struct vm_area_struct **prev,
 			unsigned long start_addr, unsigned long end_addr)
 {
@@ -502,19 +514,21 @@ static long madvise_cold(struct vm_area_struct *vma,
 
 	lru_add_drain();
 	tlb_gather_mmu(&tlb, mm, start_addr, end_addr);
-	madvise_cold_page_range(&tlb, vma, start_addr, end_addr);
+	madvise_cold_page_range(&tlb, task, vma, start_addr, end_addr);
 	tlb_finish_mmu(&tlb, start_addr, end_addr);
 
 	return 0;
 }
 
 static void madvise_pageout_page_range(struct mmu_gather *tlb,
+			     struct task_struct *task,
 			     struct vm_area_struct *vma,
 			     unsigned long addr, unsigned long end)
 {
 	struct madvise_walk_private walk_private = {
 		.pageout = true,
 		.tlb = tlb,
+		.target_task = task,
 	};
 
 	tlb_start_vma(tlb, vma);
@@ -538,7 +552,8 @@ static inline bool can_do_pageout(struct vm_area_struct *vma)
 		inode_permission(file_inode(vma->vm_file), MAY_WRITE) == 0;
 }
 
-static long madvise_pageout(struct vm_area_struct *vma,
+static long madvise_pageout(struct task_struct *task,
+			struct vm_area_struct *vma,
 			struct vm_area_struct **prev,
 			unsigned long start_addr, unsigned long end_addr)
 {
@@ -554,7 +569,7 @@ static long madvise_pageout(struct vm_area_struct *vma,
 
 	lru_add_drain();
 	tlb_gather_mmu(&tlb, mm, start_addr, end_addr);
-	madvise_pageout_page_range(&tlb, vma, start_addr, end_addr);
+	madvise_pageout_page_range(&tlb, task, vma, start_addr, end_addr);
 	tlb_finish_mmu(&tlb, start_addr, end_addr);
 
 	return 0;
@@ -683,7 +698,6 @@ static int madvise_free_pte_range(pmd_t *pmd, unsigned long addr,
 	if (nr_swap) {
 		if (current->mm == mm)
 			sync_mm_rss(mm);
-
 		add_mm_counter(mm, MM_SWAPENTS, nr_swap);
 	}
 	arch_leave_lazy_mmu_mode();
@@ -763,6 +777,8 @@ static long madvise_dontneed_free(struct vm_area_struct *vma,
 				  unsigned long start, unsigned long end,
 				  int behavior)
 {
+	struct mm_struct *mm = vma->vm_mm;
+
 	*prev = vma;
 	if (!can_madv_lru_vma(vma))
 		return -EINVAL;
@@ -770,8 +786,8 @@ static long madvise_dontneed_free(struct vm_area_struct *vma,
 	if (!userfaultfd_remove(vma, start, end)) {
 		*prev = NULL; /* mmap_sem has been dropped, prev is stale */
 
-		down_read(&current->mm->mmap_sem);
-		vma = find_vma(current->mm, start);
+		down_read(&mm->mmap_sem);
+		vma = find_vma(mm, start);
 		if (!vma)
 			return -ENOMEM;
 		if (start < vma->vm_start) {
@@ -825,6 +841,7 @@ static long madvise_remove(struct vm_area_struct *vma,
 	loff_t offset;
 	int error;
 	struct file *f;
+	struct mm_struct *mm = vma->vm_mm;
 
 	*prev = NULL;	/* tell sys_madvise we drop mmap_sem */
 
@@ -852,13 +869,13 @@ static long madvise_remove(struct vm_area_struct *vma,
 	get_file(f);
 	if (userfaultfd_remove(vma, start, end)) {
 		/* mmap_sem was not released by userfaultfd_remove() */
-		up_read(&current->mm->mmap_sem);
+		up_read(&mm->mmap_sem);
 	}
 	error = vfs_fallocate(f,
 				FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
 				offset, end - start);
 	fput(f);
-	down_read(&current->mm->mmap_sem);
+	down_read(&mm->mmap_sem);
 	return error;
 }
 
@@ -932,7 +949,8 @@ static int madvise_inject_error(int behavior,
 #endif
 
 static long
-madvise_vma(struct vm_area_struct *vma, struct vm_area_struct **prev,
+madvise_vma(struct task_struct *task, struct vm_area_struct *vma,
+		struct vm_area_struct **prev,
 		unsigned long start, unsigned long end, int behavior)
 {
 	switch (behavior) {
@@ -941,9 +959,9 @@ madvise_vma(struct vm_area_struct *vma, struct vm_area_struct **prev,
 	case MADV_WILLNEED:
 		return madvise_willneed(vma, prev, start, end);
 	case MADV_COLD:
-		return madvise_cold(vma, prev, start, end);
+		return madvise_cold(task, vma, prev, start, end);
 	case MADV_PAGEOUT:
-		return madvise_pageout(vma, prev, start, end);
+		return madvise_pageout(task, vma, prev, start, end);
 	case MADV_FREE:
 	case MADV_DONTNEED:
 		return madvise_dontneed_free(vma, prev, start, end, behavior);
@@ -990,6 +1008,22 @@ madvise_behavior_valid(int behavior)
 	}
 }
 
+static bool
+process_madvise_behavior_valid(int behavior)
+{
+	switch (behavior) {
+	case MADV_COLD:
+	case MADV_PAGEOUT:
+#ifdef CONFIG_KSM
+	case MADV_MERGEABLE:
+	case MADV_UNMERGEABLE:
+#endif
+		return true;
+	default:
+		return false;
+	}
+}
+
 /*
  * The madvise(2) system call.
  *
@@ -1037,6 +1071,11 @@ madvise_behavior_valid(int behavior)
  *  MADV_DONTDUMP - the application wants to prevent pages in the given range
  *		from being included in its core dump.
  *  MADV_DODUMP - cancel MADV_DONTDUMP: no longer exclude from core dump.
+ *  MADV_COLD - the application is not expected to use this memory soon,
+ *		deactivate pages in this range so that they can be reclaimed
+ *		easily if memory pressure hanppens.
+ *  MADV_PAGEOUT - the application is not expected to use this memory soon,
+ *		page out the pages in this range immediately.
  *
  * return values:
  *  zero    - success
@@ -1051,7 +1090,8 @@ madvise_behavior_valid(int behavior)
  *  -EBADF  - map exists, but area maps something that isn't a file.
  *  -EAGAIN - a kernel resource was temporarily unavailable.
  */
-int do_madvise(unsigned long start, size_t len_in, int behavior)
+int do_madvise(struct task_struct *target_task, struct mm_struct *mm,
+		unsigned long start, size_t len_in, int behavior)
 {
 	unsigned long end, tmp;
 	struct vm_area_struct *vma, *prev;
@@ -1089,7 +1129,7 @@ int do_madvise(unsigned long start, size_t len_in, int behavior)
 
 	write = madvise_need_mmap_write(behavior);
 	if (write) {
-		if (down_write_killable(&current->mm->mmap_sem))
+		if (down_write_killable(&mm->mmap_sem))
 			return -EINTR;
 
 		/*
@@ -1104,12 +1144,12 @@ int do_madvise(unsigned long start, size_t len_in, int behavior)
 		 * but for now we have the mmget_still_valid()
 		 * model.
 		 */
-		if (!mmget_still_valid(current->mm)) {
-			up_write(&current->mm->mmap_sem);
+		if (!mmget_still_valid(mm)) {
+			up_write(&mm->mmap_sem);
 			return -EINTR;
 		}
 	} else {
-		down_read(&current->mm->mmap_sem);
+		down_read(&mm->mmap_sem);
 	}
 
 	/*
@@ -1117,7 +1157,7 @@ int do_madvise(unsigned long start, size_t len_in, int behavior)
 	 * ranges, just ignore them, but return -ENOMEM at the end.
 	 * - different from the way of handling in mlock etc.
 	 */
-	vma = find_vma_prev(current->mm, start, &prev);
+	vma = find_vma_prev(mm, start, &prev);
 	if (vma && start > vma->vm_start)
 		prev = vma;
 
@@ -1142,7 +1182,8 @@ int do_madvise(unsigned long start, size_t len_in, int behavior)
 			tmp = end;
 
 		/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
-		error = madvise_vma(vma, &prev, start, tmp, behavior);
+		error = madvise_vma(target_task, vma, &prev,
+					start, tmp, behavior);
 		if (error)
 			goto out;
 		start = tmp;
@@ -1154,19 +1195,141 @@ int do_madvise(unsigned long start, size_t len_in, int behavior)
 		if (prev)
 			vma = prev->vm_next;
 		else	/* madvise_remove dropped mmap_sem */
-			vma = find_vma(current->mm, start);
+			vma = find_vma(mm, start);
 	}
 out:
 	blk_finish_plug(&plug);
 	if (write)
-		up_write(&current->mm->mmap_sem);
+		up_write(&mm->mmap_sem);
 	else
-		up_read(&current->mm->mmap_sem);
+		up_read(&mm->mmap_sem);
 
 	return error;
 }
 
 SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
 {
-	return do_madvise(start, len_in, behavior);
+	return do_madvise(current, current->mm, start, len_in, behavior);
 }
+
+static int process_madvise_vec(struct task_struct *target_task,
+		struct mm_struct *mm, struct iov_iter *iter, int behavior)
+{
+	struct iovec iovec;
+	int ret = 0;
+
+	while (iov_iter_count(iter)) {
+		iovec = iov_iter_iovec(iter);
+		ret = do_madvise(target_task, mm, (unsigned long)iovec.iov_base,
+					iovec.iov_len, behavior);
+		if (ret < 0)
+			break;
+		iov_iter_advance(iter, iovec.iov_len);
+	}
+
+	return ret;
+}
+
+static ssize_t do_process_madvise(int which, pid_t upid, struct iov_iter *iter,
+				       int behavior, unsigned long flags)
+{
+	ssize_t ret;
+	struct pid *pid;
+	struct task_struct *task;
+	struct mm_struct *mm;
+	size_t total_len = iov_iter_count(iter);
+
+	if (flags != 0)
+		return -EINVAL;
+
+	switch (which) {
+	case P_PID:
+		if (upid <= 0)
+			return -EINVAL;
+
+		pid = find_get_pid(upid);
+		if (!pid)
+			return -ESRCH;
+		break;
+	case P_PIDFD:
+		if (upid < 0)
+			return -EINVAL;
+
+		pid = pidfd_get_pid(upid);
+		if (IS_ERR(pid))
+			return PTR_ERR(pid);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	task = get_pid_task(pid, PIDTYPE_PID);
+	if (!task) {
+		ret = -ESRCH;
+		goto put_pid;
+	}
+
+	if (task->mm != current->mm &&
+			!process_madvise_behavior_valid(behavior)) {
+		ret = -EINVAL;
+		goto release_task;
+	}
+
+	mm = mm_access(task, PTRACE_MODE_ATTACH_FSCREDS);
+	if (IS_ERR_OR_NULL(mm)) {
+		ret = IS_ERR(mm) ? PTR_ERR(mm) : -ESRCH;
+		goto release_task;
+	}
+
+	ret = process_madvise_vec(task, mm, iter, behavior);
+	if (ret >= 0)
+		ret = total_len - iov_iter_count(iter);
+
+	mmput(mm);
+release_task:
+	put_task_struct(task);
+put_pid:
+	put_pid(pid);
+	return ret;
+}
+
+SYSCALL_DEFINE6(process_madvise, int, which, pid_t, upid,
+		const struct iovec __user *, vec, unsigned long, vlen,
+		int, behavior, unsigned long, flags)
+{
+	ssize_t ret;
+	struct iovec iovstack[UIO_FASTIOV];
+	struct iovec *iov = iovstack;
+	struct iov_iter iter;
+
+	ret = import_iovec(READ, vec, vlen, ARRAY_SIZE(iovstack), &iov, &iter);
+	if (ret >= 0) {
+		ret = do_process_madvise(which, upid, &iter, behavior, flags);
+		kfree(iov);
+	}
+	return ret;
+}
+
+#ifdef CONFIG_COMPAT
+COMPAT_SYSCALL_DEFINE6(process_madvise, compat_int_t, which,
+			compat_pid_t, upid,
+			const struct compat_iovec __user *, vec,
+			compat_ulong_t, vlen,
+			compat_int_t, behavior,
+			compat_ulong_t, flags)
+
+{
+	ssize_t ret;
+	struct iovec iovstack[UIO_FASTIOV];
+	struct iovec *iov = iovstack;
+	struct iov_iter iter;
+
+	ret = compat_import_iovec(READ, vec, vlen, ARRAY_SIZE(iovstack),
+				&iov, &iter);
+	if (ret >= 0) {
+		ret = do_process_madvise(which, upid, &iter, behavior, flags);
+		kfree(iov);
+	}
+	return ret;
+}
+#endif
diff --git a/mm/memblock.c b/mm/memblock.c
index c79ba6f9920c..39aceafc57f6 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -78,7 +78,7 @@
  * * memblock_alloc*() - these functions return the **virtual** address
  *   of the allocated memory.
  *
- * Note, that both API variants use implict assumptions about allowed
+ * Note, that both API variants use implicit assumptions about allowed
  * memory ranges and the fallback methods. Consult the documentation
  * of memblock_alloc_internal() and memblock_alloc_range_nid()
  * functions for more elaborate description.
@@ -620,7 +620,7 @@ static int __init_memblock memblock_add_range(struct memblock_type *type,
 		 * area, insert that portion.
 		 */
 		if (rbase > base) {
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+#ifdef CONFIG_NEED_MULTIPLE_NODES
 			WARN_ON(nid != memblock_get_region_node(rgn));
 #endif
 			WARN_ON(flags != rgn->flags);
@@ -1197,7 +1197,6 @@ void __init_memblock __next_mem_range_rev(u64 *idx, int nid,
 	*idx = ULLONG_MAX;
 }
 
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 /*
  * Common iterator interface used to define for_each_mem_pfn_range().
  */
@@ -1207,13 +1206,15 @@ void __init_memblock __next_mem_pfn_range(int *idx, int nid,
 {
 	struct memblock_type *type = &memblock.memory;
 	struct memblock_region *r;
+	int r_nid;
 
 	while (++*idx < type->cnt) {
 		r = &type->regions[*idx];
+		r_nid = memblock_get_region_node(r);
 
 		if (PFN_UP(r->base) >= PFN_DOWN(r->base + r->size))
 			continue;
-		if (nid == MAX_NUMNODES || nid == r->nid)
+		if (nid == MAX_NUMNODES || nid == r_nid)
 			break;
 	}
 	if (*idx >= type->cnt) {
@@ -1226,7 +1227,7 @@ void __init_memblock __next_mem_pfn_range(int *idx, int nid,
 	if (out_end_pfn)
 		*out_end_pfn = PFN_DOWN(r->base + r->size);
 	if (out_nid)
-		*out_nid = r->nid;
+		*out_nid = r_nid;
 }
 
 /**
@@ -1245,6 +1246,7 @@ void __init_memblock __next_mem_pfn_range(int *idx, int nid,
 int __init_memblock memblock_set_node(phys_addr_t base, phys_addr_t size,
 				      struct memblock_type *type, int nid)
 {
+#ifdef CONFIG_NEED_MULTIPLE_NODES
 	int start_rgn, end_rgn;
 	int i, ret;
 
@@ -1256,9 +1258,10 @@ int __init_memblock memblock_set_node(phys_addr_t base, phys_addr_t size,
 		memblock_set_region_node(&type->regions[i], nid);
 
 	memblock_merge_regions(type);
+#endif
 	return 0;
 }
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
 #ifdef CONFIG_DEFERRED_STRUCT_PAGE_INIT
 /**
  * __next_mem_pfn_range_in_zone - iterator for for_each_*_range_in_zone()
@@ -1797,7 +1800,6 @@ bool __init_memblock memblock_is_map_memory(phys_addr_t addr)
 	return !memblock_is_nomap(&memblock.memory.regions[i]);
 }
 
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 int __init_memblock memblock_search_pfn_nid(unsigned long pfn,
 			 unsigned long *start_pfn, unsigned long *end_pfn)
 {
@@ -1810,9 +1812,8 @@ int __init_memblock memblock_search_pfn_nid(unsigned long pfn,
 	*start_pfn = PFN_DOWN(type->regions[mid].base);
 	*end_pfn = PFN_DOWN(type->regions[mid].base + type->regions[mid].size);
 
-	return type->regions[mid].nid;
+	return memblock_get_region_node(&type->regions[mid]);
 }
-#endif
 
 /**
  * memblock_is_region_memory - check if a region is a subset of memory
@@ -1903,7 +1904,7 @@ static void __init_memblock memblock_dump(struct memblock_type *type)
 		size = rgn->size;
 		end = base + size - 1;
 		flags = rgn->flags;
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+#ifdef CONFIG_NEED_MULTIPLE_NODES
 		if (memblock_get_region_node(rgn) != MAX_NUMNODES)
 			snprintf(nid_buf, sizeof(nid_buf), " on node %d",
 				 memblock_get_region_node(rgn));
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 5beea03dd58a..317dbbaac603 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3201,7 +3201,7 @@ unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order,
  * Test whether @memcg has children, dead or alive.  Note that this
  * function doesn't care whether @memcg has use_hierarchy enabled and
  * returns %true if there are child csses according to the cgroup
- * hierarchy.  Testing use_hierarchy is the caller's responsiblity.
+ * hierarchy.  Testing use_hierarchy is the caller's responsibility.
  */
 static inline bool memcg_has_children(struct mem_cgroup *memcg)
 {
@@ -3688,7 +3688,7 @@ static int mem_cgroup_move_charge_write(struct cgroup_subsys_state *css,
 #define LRU_ALL	     ((1 << NR_LRU_LISTS) - 1)
 
 static unsigned long mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg,
-					   int nid, unsigned int lru_mask)
+				int nid, unsigned int lru_mask, bool tree)
 {
 	struct lruvec *lruvec = mem_cgroup_lruvec(memcg, NODE_DATA(nid));
 	unsigned long nr = 0;
@@ -3699,13 +3699,17 @@ static unsigned long mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg,
 	for_each_lru(lru) {
 		if (!(BIT(lru) & lru_mask))
 			continue;
-		nr += lruvec_page_state_local(lruvec, NR_LRU_BASE + lru);
+		if (tree)
+			nr += lruvec_page_state(lruvec, NR_LRU_BASE + lru);
+		else
+			nr += lruvec_page_state_local(lruvec, NR_LRU_BASE + lru);
 	}
 	return nr;
 }
 
 static unsigned long mem_cgroup_nr_lru_pages(struct mem_cgroup *memcg,
-					     unsigned int lru_mask)
+					     unsigned int lru_mask,
+					     bool tree)
 {
 	unsigned long nr = 0;
 	enum lru_list lru;
@@ -3713,7 +3717,10 @@ static unsigned long mem_cgroup_nr_lru_pages(struct mem_cgroup *memcg,
 	for_each_lru(lru) {
 		if (!(BIT(lru) & lru_mask))
 			continue;
-		nr += memcg_page_state_local(memcg, NR_LRU_BASE + lru);
+		if (tree)
+			nr += memcg_page_state(memcg, NR_LRU_BASE + lru);
+		else
+			nr += memcg_page_state_local(memcg, NR_LRU_BASE + lru);
 	}
 	return nr;
 }
@@ -3733,34 +3740,28 @@ static int memcg_numa_stat_show(struct seq_file *m, void *v)
 	};
 	const struct numa_stat *stat;
 	int nid;
-	unsigned long nr;
 	struct mem_cgroup *memcg = mem_cgroup_from_seq(m);
 
 	for (stat = stats; stat < stats + ARRAY_SIZE(stats); stat++) {
-		nr = mem_cgroup_nr_lru_pages(memcg, stat->lru_mask);
-		seq_printf(m, "%s=%lu", stat->name, nr);
-		for_each_node_state(nid, N_MEMORY) {
-			nr = mem_cgroup_node_nr_lru_pages(memcg, nid,
-							  stat->lru_mask);
-			seq_printf(m, " N%d=%lu", nid, nr);
-		}
+		seq_printf(m, "%s=%lu", stat->name,
+			   mem_cgroup_nr_lru_pages(memcg, stat->lru_mask,
+						   false));
+		for_each_node_state(nid, N_MEMORY)
+			seq_printf(m, " N%d=%lu", nid,
+				   mem_cgroup_node_nr_lru_pages(memcg, nid,
+							stat->lru_mask, false));
 		seq_putc(m, '\n');
 	}
 
 	for (stat = stats; stat < stats + ARRAY_SIZE(stats); stat++) {
-		struct mem_cgroup *iter;
-
-		nr = 0;
-		for_each_mem_cgroup_tree(iter, memcg)
-			nr += mem_cgroup_nr_lru_pages(iter, stat->lru_mask);
-		seq_printf(m, "hierarchical_%s=%lu", stat->name, nr);
-		for_each_node_state(nid, N_MEMORY) {
-			nr = 0;
-			for_each_mem_cgroup_tree(iter, memcg)
-				nr += mem_cgroup_node_nr_lru_pages(
-					iter, nid, stat->lru_mask);
-			seq_printf(m, " N%d=%lu", nid, nr);
-		}
+
+		seq_printf(m, "hierarchical_%s=%lu", stat->name,
+			   mem_cgroup_nr_lru_pages(memcg, stat->lru_mask,
+						   true));
+		for_each_node_state(nid, N_MEMORY)
+			seq_printf(m, " N%d=%lu", nid,
+				   mem_cgroup_node_nr_lru_pages(memcg, nid,
+							stat->lru_mask, true));
 		seq_putc(m, '\n');
 	}
 
@@ -4850,7 +4851,7 @@ static struct cftype mem_cgroup_legacy_files[] = {
  * limited to 16 bit (MEM_CGROUP_ID_MAX), limiting the total number of
  * memory-controlled cgroups to 64k.
  *
- * However, there usually are many references to the oflline CSS after
+ * However, there usually are many references to the offline CSS after
  * the cgroup has been destroyed, such as page cache or reclaimable
  * slab objects, that don't need to hang on to the ID. We want to keep
  * those dead CSS from occupying IDs, or we might quickly exhaust the
@@ -4990,19 +4991,22 @@ static struct mem_cgroup *mem_cgroup_alloc(void)
 	unsigned int size;
 	int node;
 	int __maybe_unused i;
+	long error = -ENOMEM;
 
 	size = sizeof(struct mem_cgroup);
 	size += nr_node_ids * sizeof(struct mem_cgroup_per_node *);
 
 	memcg = kzalloc(size, GFP_KERNEL);
 	if (!memcg)
-		return NULL;
+		return ERR_PTR(error);
 
 	memcg->id.id = idr_alloc(&mem_cgroup_idr, NULL,
 				 1, MEM_CGROUP_ID_MAX,
 				 GFP_KERNEL);
-	if (memcg->id.id < 0)
+	if (memcg->id.id < 0) {
+		error = memcg->id.id;
 		goto fail;
+	}
 
 	memcg->vmstats_local = alloc_percpu(struct memcg_vmstats_percpu);
 	if (!memcg->vmstats_local)
@@ -5046,7 +5050,7 @@ static struct mem_cgroup *mem_cgroup_alloc(void)
 fail:
 	mem_cgroup_id_remove(memcg);
 	__mem_cgroup_free(memcg);
-	return NULL;
+	return ERR_PTR(error);
 }
 
 static struct cgroup_subsys_state * __ref
@@ -5057,8 +5061,8 @@ mem_cgroup_css_alloc(struct cgroup_subsys_state *parent_css)
 	long error = -ENOMEM;
 
 	memcg = mem_cgroup_alloc();
-	if (!memcg)
-		return ERR_PTR(error);
+	if (IS_ERR(memcg))
+		return ERR_CAST(memcg);
 
 	WRITE_ONCE(memcg->high, PAGE_COUNTER_MAX);
 	memcg->soft_limit = PAGE_COUNTER_MAX;
@@ -5108,7 +5112,7 @@ mem_cgroup_css_alloc(struct cgroup_subsys_state *parent_css)
 fail:
 	mem_cgroup_id_remove(memcg);
 	mem_cgroup_free(memcg);
-	return ERR_PTR(-ENOMEM);
+	return ERR_PTR(error);
 }
 
 static int mem_cgroup_css_online(struct cgroup_subsys_state *css)
@@ -6364,46 +6368,51 @@ static unsigned long effective_protection(unsigned long usage,
 }
 
 /**
- * mem_cgroup_protected - check if memory consumption is in the normal range
+ * mem_cgroup_calculate_protection - calculate and cache effective low and min
  * @root: the top ancestor of the sub-tree being checked
  * @memcg: the memory cgroup to check
  *
  * WARNING: This function is not stateless! It can only be used as part
  *          of a top-down tree iteration, not for isolated queries.
- *
- * Returns one of the following:
- *   MEMCG_PROT_NONE: cgroup memory is not protected
- *   MEMCG_PROT_LOW: cgroup memory is protected as long there is
- *     an unprotected supply of reclaimable memory from other cgroups.
- *   MEMCG_PROT_MIN: cgroup memory is protected
  */
-enum mem_cgroup_protection mem_cgroup_protected(struct mem_cgroup *root,
-						struct mem_cgroup *memcg)
+void mem_cgroup_calculate_protection(struct mem_cgroup *root,
+				     struct mem_cgroup *memcg)
 {
 	unsigned long usage, parent_usage;
 	struct mem_cgroup *parent;
 
 	if (mem_cgroup_disabled())
-		return MEMCG_PROT_NONE;
+		return;
 
 	if (!root)
 		root = root_mem_cgroup;
-	if (memcg == root)
-		return MEMCG_PROT_NONE;
+	if (memcg == root) {
+		/*
+		 * The cgroup is the reclaim root in this reclaim
+		 * cycle, and therefore not protected. But it may have
+		 * stale effective protection values from previous
+		 * cycles in which it was not the reclaim root - for
+		 * example, global reclaim followed by limit reclaim.
+		 * Reset these values for mem_cgroup_protection().
+		 */
+		WRITE_ONCE(memcg->memory.emin, 0);
+		WRITE_ONCE(memcg->memory.elow, 0);
+		return;
+	}
 
 	usage = page_counter_read(&memcg->memory);
 	if (!usage)
-		return MEMCG_PROT_NONE;
+		return;
 
 	parent = parent_mem_cgroup(memcg);
 	/* No parent means a non-hierarchical mode on v1 memcg */
 	if (!parent)
-		return MEMCG_PROT_NONE;
+		return;
 
 	if (parent == root) {
 		memcg->memory.emin = READ_ONCE(memcg->memory.min);
 		memcg->memory.elow = memcg->memory.low;
-		goto out;
+		return;
 	}
 
 	parent_usage = page_counter_read(&parent->memory);
@@ -6416,14 +6425,6 @@ enum mem_cgroup_protection mem_cgroup_protected(struct mem_cgroup *root,
 	WRITE_ONCE(memcg->memory.elow, effective_protection(usage, parent_usage,
 			memcg->memory.low, READ_ONCE(parent->memory.elow),
 			atomic_long_read(&parent->memory.children_low_usage)));
-
-out:
-	if (usage <= memcg->memory.emin)
-		return MEMCG_PROT_MIN;
-	else if (usage <= memcg->memory.elow)
-		return MEMCG_PROT_LOW;
-	else
-		return MEMCG_PROT_NONE;
 }
 
 /**
diff --git a/mm/memory.c b/mm/memory.c
index f703fe8c8346..0ad29c7274de 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -802,8 +802,6 @@ copy_one_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 		get_page(page);
 		page_dup_rmap(page, false);
 		rss[mm_counter(page)]++;
-	} else if (pte_devmap(pte)) {
-		page = pte_page(pte);
 	}
 
 out_set_pte:
@@ -2469,7 +2467,7 @@ static inline bool cow_user_page(struct page *dst, struct page *src,
 		}
 
 		/*
-		 * The same page can be mapped back since last copy attampt.
+		 * The same page can be mapped back since last copy attempt.
 		 * Try to copy again under PTL.
 		 */
 		if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE)) {
@@ -3125,8 +3123,8 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 	if (!page) {
 		struct swap_info_struct *si = swp_swap_info(entry);
 
-		if (si->flags & SWP_SYNCHRONOUS_IO &&
-				__swap_count(entry) == 1) {
+		if (data_race(si->flags & SWP_SYNCHRONOUS_IO) &&
+		    __swap_count(entry) == 1) {
 			/* skip swapcache */
 			page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma,
 							vmf->address);
@@ -4434,19 +4432,11 @@ int __pud_alloc(struct mm_struct *mm, p4d_t *p4d, unsigned long address)
 	smp_wmb(); /* See comment in __pte_alloc */
 
 	spin_lock(&mm->page_table_lock);
-#ifndef __ARCH_HAS_5LEVEL_HACK
 	if (!p4d_present(*p4d)) {
 		mm_inc_nr_puds(mm);
 		p4d_populate(mm, p4d, new);
 	} else	/* Another has populated it */
 		pud_free(mm, new);
-#else
-	if (!pgd_present(*p4d)) {
-		mm_inc_nr_puds(mm);
-		pgd_populate(mm, p4d, new);
-	} else	/* Another has populated it */
-		pud_free(mm, new);
-#endif /* __ARCH_HAS_5LEVEL_HACK */
 	spin_unlock(&mm->page_table_lock);
 	return 0;
 }
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index fc0aad0bc1f5..555137bd0882 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -42,6 +42,10 @@
 #include "internal.h"
 #include "shuffle.h"
 
+#ifndef MEMORY_HOTPLUG_RES_NAME
+#define MEMORY_HOTPLUG_RES_NAME "System RAM"
+#endif
+
 /*
  * online_page_callback contains pointer to current page onlining function.
  * Initially it is generic_online_page(). If it is required it could be
@@ -102,7 +106,7 @@ static struct resource *register_memory_resource(u64 start, u64 size)
 {
 	struct resource *res;
 	unsigned long flags =  IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
-	char *resource_name = "System RAM";
+	char *resource_name = MEMORY_HOTPLUG_RES_NAME;
 
 	/*
 	 * Make sure value parsed from 'mem=' only restricts memory adding
@@ -862,10 +866,9 @@ static void reset_node_present_pages(pg_data_t *pgdat)
 }
 
 /* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
-static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
+static pg_data_t __ref *hotadd_new_pgdat(int nid)
 {
 	struct pglist_data *pgdat;
-	unsigned long start_pfn = PFN_DOWN(start);
 
 	pgdat = NODE_DATA(nid);
 	if (!pgdat) {
@@ -879,13 +882,13 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
 	} else {
 		int cpu;
 		/*
-		 * Reset the nr_zones, order and classzone_idx before reuse.
-		 * Note that kswapd will init kswapd_classzone_idx properly
+		 * Reset the nr_zones, order and highest_zoneidx before reuse.
+		 * Note that kswapd will init kswapd_highest_zoneidx properly
 		 * when it starts in the near future.
 		 */
 		pgdat->nr_zones = 0;
 		pgdat->kswapd_order = 0;
-		pgdat->kswapd_classzone_idx = 0;
+		pgdat->kswapd_highest_zoneidx = 0;
 		for_each_online_cpu(cpu) {
 			struct per_cpu_nodestat *p;
 
@@ -895,9 +898,8 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
 	}
 
 	/* we can use NODE_DATA(nid) from here */
-
 	pgdat->node_id = nid;
-	pgdat->node_start_pfn = start_pfn;
+	pgdat->node_start_pfn = 0;
 
 	/* init node's zones as empty zones, we don't have any present pages.*/
 	free_area_init_core_hotplug(nid);
@@ -932,7 +934,6 @@ static void rollback_node_hotadd(int nid)
 /**
  * try_online_node - online a node if offlined
  * @nid: the node ID
- * @start: start addr of the node
  * @set_node_online: Whether we want to online the node
  * called by cpu_up() to online a node without onlined memory.
  *
@@ -941,7 +942,7 @@ static void rollback_node_hotadd(int nid)
  * 0 -> the node is already online
  * -ENOMEM -> the node could not be allocated
  */
-static int __try_online_node(int nid, u64 start, bool set_node_online)
+static int __try_online_node(int nid, bool set_node_online)
 {
 	pg_data_t *pgdat;
 	int ret = 1;
@@ -949,7 +950,7 @@ static int __try_online_node(int nid, u64 start, bool set_node_online)
 	if (node_online(nid))
 		return 0;
 
-	pgdat = hotadd_new_pgdat(nid, start);
+	pgdat = hotadd_new_pgdat(nid);
 	if (!pgdat) {
 		pr_err("Cannot online node %d due to NULL pgdat\n", nid);
 		ret = -ENOMEM;
@@ -973,7 +974,7 @@ int try_online_node(int nid)
 	int ret;
 
 	mem_hotplug_begin();
-	ret =  __try_online_node(nid, 0, true);
+	ret =  __try_online_node(nid, true);
 	mem_hotplug_done();
 	return ret;
 }
@@ -1017,17 +1018,17 @@ int __ref add_memory_resource(int nid, struct resource *res)
 	if (ret)
 		return ret;
 
+	if (!node_possible(nid)) {
+		WARN(1, "node %d was absent from the node_possible_map\n", nid);
+		return -EINVAL;
+	}
+
 	mem_hotplug_begin();
 
-	/*
-	 * Add new range to memblock so that when hotadd_new_pgdat() is called
-	 * to allocate new pgdat, get_pfn_range_for_nid() will be able to find
-	 * this new range and calculate total pages correctly.  The range will
-	 * be removed at hot-remove time.
-	 */
-	memblock_add_node(start, size, nid);
+	if (IS_ENABLED(CONFIG_ARCH_KEEP_MEMBLOCK))
+		memblock_add_node(start, size, nid);
 
-	ret = __try_online_node(nid, start, false);
+	ret = __try_online_node(nid, false);
 	if (ret < 0)
 		goto error;
 	new_node = ret;
@@ -1074,7 +1075,8 @@ int __ref add_memory_resource(int nid, struct resource *res)
 	/* rollback pgdat allocation and others */
 	if (new_node)
 		rollback_node_hotadd(nid);
-	memblock_remove(start, size);
+	if (IS_ENABLED(CONFIG_ARCH_KEEP_MEMBLOCK))
+		memblock_remove(start, size);
 	mem_hotplug_done();
 	return ret;
 }
@@ -1108,81 +1110,6 @@ int add_memory(int nid, u64 start, u64 size)
 EXPORT_SYMBOL_GPL(add_memory);
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
-/*
- * A free page on the buddy free lists (not the per-cpu lists) has PageBuddy
- * set and the size of the free page is given by page_order(). Using this,
- * the function determines if the pageblock contains only free pages.
- * Due to buddy contraints, a free page at least the size of a pageblock will
- * be located at the start of the pageblock
- */
-static inline int pageblock_free(struct page *page)
-{
-	return PageBuddy(page) && page_order(page) >= pageblock_order;
-}
-
-/* Return the pfn of the start of the next active pageblock after a given pfn */
-static unsigned long next_active_pageblock(unsigned long pfn)
-{
-	struct page *page = pfn_to_page(pfn);
-
-	/* Ensure the starting page is pageblock-aligned */
-	BUG_ON(pfn & (pageblock_nr_pages - 1));
-
-	/* If the entire pageblock is free, move to the end of free page */
-	if (pageblock_free(page)) {
-		int order;
-		/* be careful. we don't have locks, page_order can be changed.*/
-		order = page_order(page);
-		if ((order < MAX_ORDER) && (order >= pageblock_order))
-			return pfn + (1 << order);
-	}
-
-	return pfn + pageblock_nr_pages;
-}
-
-static bool is_pageblock_removable_nolock(unsigned long pfn)
-{
-	struct page *page = pfn_to_page(pfn);
-	struct zone *zone;
-
-	/*
-	 * We have to be careful here because we are iterating over memory
-	 * sections which are not zone aware so we might end up outside of
-	 * the zone but still within the section.
-	 * We have to take care about the node as well. If the node is offline
-	 * its NODE_DATA will be NULL - see page_zone.
-	 */
-	if (!node_online(page_to_nid(page)))
-		return false;
-
-	zone = page_zone(page);
-	pfn = page_to_pfn(page);
-	if (!zone_spans_pfn(zone, pfn))
-		return false;
-
-	return !has_unmovable_pages(zone, page, MIGRATE_MOVABLE,
-				    MEMORY_OFFLINE);
-}
-
-/* Checks if this range of memory is likely to be hot-removable. */
-bool is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages)
-{
-	unsigned long end_pfn, pfn;
-
-	end_pfn = min(start_pfn + nr_pages,
-			zone_end_pfn(page_zone(pfn_to_page(start_pfn))));
-
-	/* Check the starting page of each pageblock within the range */
-	for (pfn = start_pfn; pfn < end_pfn; pfn = next_active_pageblock(pfn)) {
-		if (!is_pageblock_removable_nolock(pfn))
-			return false;
-		cond_resched();
-	}
-
-	/* All pageblocks in the memory block are likely to be hot-removable */
-	return true;
-}
-
 /*
  * Confirm all pages in a range [start, end) belong to the same zone (skipping
  * memory holes). When true, return the zone.
@@ -1360,7 +1287,7 @@ offline_isolated_pages_cb(unsigned long start, unsigned long nr_pages,
 }
 
 /*
- * Check all pages in range, recoreded as memory resource, are isolated.
+ * Check all pages in range, recorded as memory resource, are isolated.
  */
 static int
 check_pages_isolated_cb(unsigned long start_pfn, unsigned long nr_pages,
@@ -1372,11 +1299,7 @@ check_pages_isolated_cb(unsigned long start_pfn, unsigned long nr_pages,
 
 static int __init cmdline_parse_movable_node(char *p)
 {
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 	movable_node_enabled = true;
-#else
-	pr_warn("movable_node parameter depends on CONFIG_HAVE_MEMBLOCK_NODE_MAP to work properly\n");
-#endif
 	return 0;
 }
 early_param("movable_node", cmdline_parse_movable_node);
@@ -1750,8 +1673,12 @@ static int __ref try_remove_memory(int nid, u64 start, u64 size)
 	mem_hotplug_begin();
 
 	arch_remove_memory(nid, start, size, NULL);
-	memblock_free(start, size);
-	memblock_remove(start, size);
+
+	if (IS_ENABLED(CONFIG_ARCH_KEEP_MEMBLOCK)) {
+		memblock_free(start, size);
+		memblock_remove(start, size);
+	}
+
 	__release_memory_resource(start, size);
 
 	try_offline_node(nid);
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 48ba9729062e..1965e2681877 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -927,10 +927,7 @@ static int lookup_node(struct mm_struct *mm, unsigned long addr)
 
 	int locked = 1;
 	err = get_user_pages_locked(addr & PAGE_MASK, 1, 0, &p, &locked);
-	if (err == 0) {
-		/* E.g. GUP interrupted by fatal signal */
-		err = -EFAULT;
-	} else if (err > 0) {
+	if (err > 0) {
 		err = page_to_nid(p);
 		put_page(p);
 	}
diff --git a/mm/mempool.c b/mm/mempool.c
index 85efab3da720..79bff63ecf27 100644
--- a/mm/mempool.c
+++ b/mm/mempool.c
@@ -489,7 +489,7 @@ void mempool_free(void *element, mempool_t *pool)
 	 * ensures that there will be frees which return elements to the
 	 * pool waking up the waiters.
 	 */
-	if (unlikely(pool->curr_nr < pool->min_nr)) {
+	if (unlikely(READ_ONCE(pool->curr_nr) < pool->min_nr)) {
 		spin_lock_irqsave(&pool->lock, flags);
 		if (likely(pool->curr_nr < pool->min_nr)) {
 			add_element(pool, element);
diff --git a/mm/memremap.c b/mm/memremap.c
index 03e38b7a38f1..8afcc54c8928 100644
--- a/mm/memremap.c
+++ b/mm/memremap.c
@@ -97,6 +97,26 @@ static unsigned long pfn_next(unsigned long pfn)
 	return pfn + 1;
 }
 
+/*
+ * This returns true if the page is reserved by ZONE_DEVICE driver.
+ */
+bool pfn_zone_device_reserved(unsigned long pfn)
+{
+	struct dev_pagemap *pgmap;
+	struct vmem_altmap *altmap;
+	bool ret = false;
+
+	pgmap = get_dev_pagemap(pfn, NULL);
+	if (!pgmap)
+		return ret;
+	altmap = pgmap_altmap(pgmap);
+	if (altmap && pfn < (altmap->base_pfn + altmap->reserve))
+		ret = true;
+	put_dev_pagemap(pgmap);
+
+	return ret;
+}
+
 #define for_each_device_pfn(pfn, map) \
 	for (pfn = pfn_first(map); pfn < pfn_end(map); pfn = pfn_next(pfn))
 
diff --git a/mm/migrate.c b/mm/migrate.c
index 7160c1556f79..f66f93f9a5e2 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1032,7 +1032,7 @@ static int __unmap_and_move(struct page *page, struct page *newpage,
 		 * to the LRU. Later, when the IO completes the pages are
 		 * marked uptodate and unlocked. However, the queueing
 		 * could be merging multiple pages for one bio (e.g.
-		 * mpage_readpages). If an allocation happens for the
+		 * mpage_readahead). If an allocation happens for the
 		 * second or third page, the process can end up locking
 		 * the same page twice and deadlocking. Rather than
 		 * trying to be clever about what pages can be locked,
diff --git a/mm/mm_init.c b/mm/mm_init.c
index 7da6991d9435..435e5f794b3b 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -67,26 +67,30 @@ void __init mminit_verify_pageflags_layout(void)
 	unsigned long or_mask, add_mask;
 
 	shift = 8 * sizeof(unsigned long);
-	width = shift - SECTIONS_WIDTH - NODES_WIDTH - ZONES_WIDTH - LAST_CPUPID_SHIFT;
+	width = shift - SECTIONS_WIDTH - NODES_WIDTH - ZONES_WIDTH
+		- LAST_CPUPID_SHIFT - KASAN_TAG_WIDTH;
 	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_widths",
-		"Section %d Node %d Zone %d Lastcpupid %d Flags %d\n",
+		"Section %d Node %d Zone %d Lastcpupid %d Kasantag %d Flags %d\n",
 		SECTIONS_WIDTH,
 		NODES_WIDTH,
 		ZONES_WIDTH,
 		LAST_CPUPID_WIDTH,
+		KASAN_TAG_WIDTH,
 		NR_PAGEFLAGS);
 	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_shifts",
-		"Section %d Node %d Zone %d Lastcpupid %d\n",
+		"Section %d Node %d Zone %d Lastcpupid %d Kasantag %d\n",
 		SECTIONS_SHIFT,
 		NODES_SHIFT,
 		ZONES_SHIFT,
-		LAST_CPUPID_SHIFT);
+		LAST_CPUPID_SHIFT,
+		KASAN_TAG_WIDTH);
 	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_pgshifts",
-		"Section %lu Node %lu Zone %lu Lastcpupid %lu\n",
+		"Section %lu Node %lu Zone %lu Lastcpupid %lu Kasantag %lu\n",
 		(unsigned long)SECTIONS_PGSHIFT,
 		(unsigned long)NODES_PGSHIFT,
 		(unsigned long)ZONES_PGSHIFT,
-		(unsigned long)LAST_CPUPID_PGSHIFT);
+		(unsigned long)LAST_CPUPID_PGSHIFT,
+		(unsigned long)KASAN_TAG_PGSHIFT);
 	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_nodezoneid",
 		"Node/Zone ID: %lu -> %lu\n",
 		(unsigned long)(ZONEID_PGOFF + ZONEID_SHIFT),
diff --git a/mm/mmap.c b/mm/mmap.c
index f609e9ec4a25..fae283e3c6fa 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -62,6 +62,14 @@
 #define arch_mmap_check(addr, len, flags)	(0)
 #endif
 
+#ifndef arch_get_mmap_end
+#define arch_get_mmap_end(addr)	(TASK_SIZE)
+#endif
+
+#ifndef arch_get_mmap_base
+#define arch_get_mmap_base(addr, base) (base)
+#endif
+
 #ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS
 const int mmap_rnd_bits_min = CONFIG_ARCH_MMAP_RND_BITS_MIN;
 const int mmap_rnd_bits_max = CONFIG_ARCH_MMAP_RND_BITS_MAX;
@@ -1207,7 +1215,7 @@ struct vm_area_struct *vma_merge(struct mm_struct *mm,
 }
 
 /*
- * Rough compatbility check to quickly see if it's even worth looking
+ * Rough compatibility check to quickly see if it's even worth looking
  * at sharing an anon_vma.
  *
  * They need to have the same vm_file, and the flags can only differ
@@ -1369,6 +1377,7 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
 			unsigned long pgoff, unsigned long *populate,
 			struct list_head *uf)
 {
+	const unsigned long mmap_end = arch_get_mmap_end(addr);
 	struct mm_struct *mm = current->mm;
 	int pkey = 0;
 
@@ -1391,8 +1400,12 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
 	if (flags & MAP_FIXED_NOREPLACE)
 		flags |= MAP_FIXED;
 
-	if (!(flags & MAP_FIXED))
+	if (flags & MAP_FIXED) {
+		if ((addr < mmap_min_addr) || (addr > mmap_end))
+			return -ENOMEM;
+	} else {
 		addr = round_hint_to_min(addr);
+	}
 
 	/* Careful about overflows.. */
 	len = PAGE_ALIGN(len);
@@ -1850,6 +1863,22 @@ unsigned long mmap_region(struct file *file, unsigned long addr,
 	return error;
 }
 
+static inline unsigned long gap_start_offset(struct vm_unmapped_area_info *info,
+					unsigned long addr)
+{
+	/* get gap_start offset to adjust gap address to the
+	 * desired alignment
+	 */
+	return (info->align_offset - addr) & info->align_mask;
+}
+
+static inline unsigned long gap_end_offset(struct vm_unmapped_area_info *info,
+					unsigned long addr)
+{
+	/* get gap_end offset to adjust gap address to the desired alignment */
+	return (addr - info->align_offset) & info->align_mask;
+}
+
 static unsigned long unmapped_area(struct vm_unmapped_area_info *info)
 {
 	/*
@@ -1864,10 +1893,7 @@ static unsigned long unmapped_area(struct vm_unmapped_area_info *info)
 	struct vm_area_struct *vma;
 	unsigned long length, low_limit, high_limit, gap_start, gap_end;
 
-	/* Adjust search length to account for worst case alignment overhead */
-	length = info->length + info->align_mask;
-	if (length < info->length)
-		return -ENOMEM;
+	length = info->length;
 
 	/* Adjust search limits by the desired length */
 	if (info->high_limit < length)
@@ -1899,6 +1925,7 @@ static unsigned long unmapped_area(struct vm_unmapped_area_info *info)
 		}
 
 		gap_start = vma->vm_prev ? vm_end_gap(vma->vm_prev) : 0;
+		gap_start += gap_start_offset(info, gap_start);
 check_current:
 		/* Check if current node has a suitable gap */
 		if (gap_start > high_limit)
@@ -1927,6 +1954,7 @@ static unsigned long unmapped_area(struct vm_unmapped_area_info *info)
 				       struct vm_area_struct, vm_rb);
 			if (prev == vma->vm_rb.rb_left) {
 				gap_start = vm_end_gap(vma->vm_prev);
+				gap_start += gap_start_offset(info, gap_start);
 				gap_end = vm_start_gap(vma);
 				goto check_current;
 			}
@@ -1936,17 +1964,17 @@ static unsigned long unmapped_area(struct vm_unmapped_area_info *info)
 check_highest:
 	/* Check highest gap, which does not precede any rbtree node */
 	gap_start = mm->highest_vm_end;
+	gap_start += gap_start_offset(info, gap_start);
 	gap_end = ULONG_MAX;  /* Only for VM_BUG_ON below */
 	if (gap_start > high_limit)
 		return -ENOMEM;
 
 found:
 	/* We found a suitable gap. Clip it with the original low_limit. */
-	if (gap_start < info->low_limit)
+	if (gap_start < info->low_limit) {
 		gap_start = info->low_limit;
-
-	/* Adjust gap address to the desired alignment */
-	gap_start += (info->align_offset - gap_start) & info->align_mask;
+		gap_start += gap_start_offset(info, gap_start);
+	}
 
 	VM_BUG_ON(gap_start + info->length > info->high_limit);
 	VM_BUG_ON(gap_start + info->length > gap_end);
@@ -1959,16 +1987,14 @@ static unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info)
 	struct vm_area_struct *vma;
 	unsigned long length, low_limit, high_limit, gap_start, gap_end;
 
-	/* Adjust search length to account for worst case alignment overhead */
-	length = info->length + info->align_mask;
-	if (length < info->length)
-		return -ENOMEM;
+	length = info->length;
 
 	/*
 	 * Adjust search limits by the desired length.
 	 * See implementation comment at top of unmapped_area().
 	 */
 	gap_end = info->high_limit;
+	gap_end -= gap_end_offset(info, gap_end);
 	if (gap_end < length)
 		return -ENOMEM;
 	high_limit = gap_end - length;
@@ -2005,6 +2031,7 @@ static unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info)
 check_current:
 		/* Check if current node has a suitable gap */
 		gap_end = vm_start_gap(vma);
+		gap_end -= gap_end_offset(info, gap_end);
 		if (gap_end < low_limit)
 			return -ENOMEM;
 		if (gap_start <= high_limit &&
@@ -2039,13 +2066,14 @@ static unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info)
 
 found:
 	/* We found a suitable gap. Clip it with the original high_limit. */
-	if (gap_end > info->high_limit)
+	if (gap_end > info->high_limit) {
 		gap_end = info->high_limit;
+		gap_end -= gap_end_offset(info, gap_end);
+	}
 
 found_highest:
 	/* Compute highest gap address at the desired alignment */
 	gap_end -= info->length;
-	gap_end -= (gap_end - info->align_offset) & info->align_mask;
 
 	VM_BUG_ON(gap_end < info->low_limit);
 	VM_BUG_ON(gap_end < gap_start);
@@ -2074,14 +2102,6 @@ unsigned long vm_unmapped_area(struct vm_unmapped_area_info *info)
 	return addr;
 }
 
-#ifndef arch_get_mmap_end
-#define arch_get_mmap_end(addr)	(TASK_SIZE)
-#endif
-
-#ifndef arch_get_mmap_base
-#define arch_get_mmap_base(addr, base) (base)
-#endif
-
 /* Get an address range which is currently unmapped.
  * For shmat() with addr=0.
  *
@@ -2193,12 +2213,13 @@ get_unmapped_area(struct file *file, unsigned long addr, unsigned long len,
 	unsigned long (*get_area)(struct file *, unsigned long,
 				  unsigned long, unsigned long, unsigned long);
 
+	const unsigned long mmap_end = arch_get_mmap_end(addr);
 	unsigned long error = arch_mmap_check(addr, len, flags);
 	if (error)
 		return error;
 
 	/* Careful about overflows.. */
-	if (len > TASK_SIZE)
+	if (len > mmap_end - mmap_min_addr)
 		return -ENOMEM;
 
 	get_area = current->mm->get_unmapped_area;
@@ -2219,7 +2240,7 @@ get_unmapped_area(struct file *file, unsigned long addr, unsigned long len,
 	if (IS_ERR_VALUE(addr))
 		return addr;
 
-	if (addr > TASK_SIZE - len)
+	if ((addr < mmap_min_addr) || (addr > mmap_end - len))
 		return -ENOMEM;
 	if (offset_in_page(addr))
 		return -EINVAL;
@@ -3159,6 +3180,7 @@ void exit_mmap(struct mm_struct *mm)
 		if (vma->vm_flags & VM_ACCOUNT)
 			nr_accounted += vma_pages(vma);
 		vma = remove_vma(vma);
+		cond_resched();
 	}
 	vm_unacct_memory(nr_accounted);
 }
diff --git a/mm/mmu_context.c b/mm/mmu_context.c
deleted file mode 100644
index 3e612ae748e9..000000000000
--- a/mm/mmu_context.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/* Copyright (C) 2009 Red Hat, Inc.
- *
- * See ../COPYING for licensing terms.
- */
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/sched/mm.h>
-#include <linux/sched/task.h>
-#include <linux/mmu_context.h>
-#include <linux/export.h>
-
-#include <asm/mmu_context.h>
-
-/*
- * use_mm
- *	Makes the calling kernel thread take on the specified
- *	mm context.
- *	(Note: this routine is intended to be called only
- *	from a kernel thread context)
- */
-void use_mm(struct mm_struct *mm)
-{
-	struct mm_struct *active_mm;
-	struct task_struct *tsk = current;
-
-	task_lock(tsk);
-	active_mm = tsk->active_mm;
-	if (active_mm != mm) {
-		mmgrab(mm);
-		tsk->active_mm = mm;
-	}
-	tsk->mm = mm;
-	switch_mm(active_mm, mm, tsk);
-	task_unlock(tsk);
-#ifdef finish_arch_post_lock_switch
-	finish_arch_post_lock_switch();
-#endif
-
-	if (active_mm != mm)
-		mmdrop(active_mm);
-}
-EXPORT_SYMBOL_GPL(use_mm);
-
-/*
- * unuse_mm
- *	Reverses the effect of use_mm, i.e. releases the
- *	specified mm context which was earlier taken on
- *	by the calling kernel thread
- *	(Note: this routine is intended to be called only
- *	from a kernel thread context)
- */
-void unuse_mm(struct mm_struct *mm)
-{
-	struct task_struct *tsk = current;
-
-	task_lock(tsk);
-	sync_mm_rss(mm);
-	tsk->mm = NULL;
-	/* active_mm is still 'mm' */
-	enter_lazy_tlb(mm, tsk);
-	task_unlock(tsk);
-}
-EXPORT_SYMBOL_GPL(unuse_mm);
diff --git a/mm/mremap.c b/mm/mremap.c
index c881abeba0bf..b86ba43cf46f 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -785,7 +785,7 @@ SYSCALL_DEFINE5(mremap, unsigned long, addr, unsigned long, old_len,
 out:
 	if (offset_in_page(ret)) {
 		vm_unacct_memory(charged);
-		locked = 0;
+		locked = false;
 	}
 	if (downgraded)
 		up_read(&current->mm->mmap_sem);
diff --git a/mm/nommu.c b/mm/nommu.c
index 318df4e236c9..371697bf372d 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -140,7 +140,7 @@ void vfree(const void *addr)
 }
 EXPORT_SYMBOL(vfree);
 
-void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
+void *__vmalloc(unsigned long size, gfp_t gfp_mask)
 {
 	/*
 	 *  You can't specify __GFP_HIGHMEM with kmalloc() since kmalloc()
@@ -150,16 +150,25 @@ void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
 }
 EXPORT_SYMBOL(__vmalloc);
 
-void *__vmalloc_node_flags(unsigned long size, int node, gfp_t flags)
+void *__vmalloc_node_range(unsigned long size, unsigned long align,
+		unsigned long start, unsigned long end, gfp_t gfp_mask,
+		pgprot_t prot, unsigned long vm_flags, int node,
+		const void *caller)
 {
-	return __vmalloc(size, flags, PAGE_KERNEL);
+	return __vmalloc(size, gfp_mask);
+}
+
+void *__vmalloc_node(unsigned long size, unsigned long align, gfp_t gfp_mask,
+		int node, const void *caller)
+{
+	return __vmalloc(size, gfp_mask);
 }
 
 static void *__vmalloc_user_flags(unsigned long size, gfp_t flags)
 {
 	void *ret;
 
-	ret = __vmalloc(size, flags, PAGE_KERNEL);
+	ret = __vmalloc(size, flags);
 	if (ret) {
 		struct vm_area_struct *vma;
 
@@ -179,12 +188,6 @@ void *vmalloc_user(unsigned long size)
 }
 EXPORT_SYMBOL(vmalloc_user);
 
-void *vmalloc_user_node_flags(unsigned long size, int node, gfp_t flags)
-{
-	return __vmalloc_user_flags(size, flags | __GFP_ZERO);
-}
-EXPORT_SYMBOL(vmalloc_user_node_flags);
-
 struct page *vmalloc_to_page(const void *addr)
 {
 	return virt_to_page(addr);
@@ -230,7 +233,7 @@ long vwrite(char *buf, char *addr, unsigned long count)
  */
 void *vmalloc(unsigned long size)
 {
-       return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
+       return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM);
 }
 EXPORT_SYMBOL(vmalloc);
 
@@ -248,8 +251,7 @@ EXPORT_SYMBOL(vmalloc);
  */
 void *vzalloc(unsigned long size)
 {
-	return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
-			PAGE_KERNEL);
+	return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO);
 }
 EXPORT_SYMBOL(vzalloc);
 
@@ -302,7 +304,7 @@ EXPORT_SYMBOL(vzalloc_node);
 
 void *vmalloc_exec(unsigned long size)
 {
-	return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC);
+	return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM);
 }
 
 /**
@@ -314,7 +316,7 @@ void *vmalloc_exec(unsigned long size)
  */
 void *vmalloc_32(unsigned long size)
 {
-	return __vmalloc(size, GFP_KERNEL, PAGE_KERNEL);
+	return __vmalloc(size, GFP_KERNEL);
 }
 EXPORT_SYMBOL(vmalloc_32);
 
@@ -351,7 +353,7 @@ void vunmap(const void *addr)
 }
 EXPORT_SYMBOL(vunmap);
 
-void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t prot)
+void *vm_map_ram(struct page **pages, unsigned int count, int node)
 {
 	BUG();
 	return NULL;
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index dfc357614e56..463b3d74a64a 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -126,7 +126,7 @@ static bool oom_cpuset_eligible(struct task_struct *tsk, struct oom_control *oc)
 
 /*
  * The process p may have detached its own ->mm while exiting or through
- * use_mm(), but one or more of its subthreads may still have a valid
+ * kthread_use_mm(), but one or more of its subthreads may still have a valid
  * pointer.  Return p, or any of its subthreads with a valid ->mm, with
  * task_lock() held.
  */
@@ -254,7 +254,7 @@ static enum oom_constraint constrained_alloc(struct oom_control *oc)
 {
 	struct zone *zone;
 	struct zoneref *z;
-	enum zone_type high_zoneidx = gfp_zone(oc->gfp_mask);
+	enum zone_type highest_zoneidx = gfp_zone(oc->gfp_mask);
 	bool cpuset_limited = false;
 	int nid;
 
@@ -294,7 +294,7 @@ static enum oom_constraint constrained_alloc(struct oom_control *oc)
 
 	/* Check this allocation failure is caused by cpuset's wall function */
 	for_each_zone_zonelist_nodemask(zone, z, oc->zonelist,
-			high_zoneidx, oc->nodemask)
+			highest_zoneidx, oc->nodemask)
 		if (!cpuset_zone_allowed(zone, oc->gfp_mask))
 			cpuset_limited = true;
 
@@ -919,8 +919,8 @@ static void __oom_kill_process(struct task_struct *victim, const char *message)
 			continue;
 		}
 		/*
-		 * No use_mm() user needs to read from the userspace so we are
-		 * ok to reap it.
+		 * No kthead_use_mm() user needs to read from the userspace so
+		 * we are ok to reap it.
 		 */
 		if (unlikely(p->flags & PF_KTHREAD))
 			continue;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 7326b54ab728..a53f4cfa7628 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -257,7 +257,7 @@ static void wb_min_max_ratio(struct bdi_writeback *wb,
  * requiring writeback.
  *
  * This number of dirtyable pages is the base value of which the
- * user-configurable dirty ratio is the effictive number of pages that
+ * user-configurable dirty ratio is the effective number of pages that
  * are allowed to be actually dirtied.  Per individual zone, or
  * globally by using the sum of dirtyable pages over all zones.
  *
@@ -512,8 +512,7 @@ bool node_dirty_ok(struct pglist_data *pgdat)
 }
 
 int dirty_background_ratio_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 
@@ -524,8 +523,7 @@ int dirty_background_ratio_handler(struct ctl_table *table, int write,
 }
 
 int dirty_background_bytes_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 
@@ -535,9 +533,8 @@ int dirty_background_bytes_handler(struct ctl_table *table, int write,
 	return ret;
 }
 
-int dirty_ratio_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos)
+int dirty_ratio_handler(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	int old_ratio = vm_dirty_ratio;
 	int ret;
@@ -551,8 +548,7 @@ int dirty_ratio_handler(struct ctl_table *table, int write,
 }
 
 int dirty_bytes_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	unsigned long old_bytes = vm_dirty_bytes;
 	int ret;
@@ -1972,7 +1968,7 @@ bool wb_over_bg_thresh(struct bdi_writeback *wb)
  * sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
  */
 int dirty_writeback_centisecs_handler(struct ctl_table *table, int write,
-	void __user *buffer, size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
 	unsigned int old_interval = dirty_writeback_interval;
 	int ret;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 69827d4fa052..4c5a5630c769 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -335,7 +335,6 @@ static unsigned long nr_kernel_pages __initdata;
 static unsigned long nr_all_pages __initdata;
 static unsigned long dma_reserve __initdata;
 
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 static unsigned long arch_zone_lowest_possible_pfn[MAX_NR_ZONES] __initdata;
 static unsigned long arch_zone_highest_possible_pfn[MAX_NR_ZONES] __initdata;
 static unsigned long required_kernelcore __initdata;
@@ -348,7 +347,6 @@ static bool mirrored_kernelcore __meminitdata;
 /* movable_zone is the "real" zone pages in ZONE_MOVABLE are taken from */
 int movable_zone;
 EXPORT_SYMBOL(movable_zone);
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
 
 #if MAX_NUMNODES > 1
 unsigned int nr_node_ids __read_mostly = MAX_NUMNODES;
@@ -609,8 +607,7 @@ static inline int __maybe_unused bad_range(struct zone *zone, struct page *page)
 }
 #endif
 
-static void bad_page(struct page *page, const char *reason,
-		unsigned long bad_flags)
+static void bad_page(struct page *page, const char *reason)
 {
 	static unsigned long resume;
 	static unsigned long nr_shown;
@@ -639,10 +636,6 @@ static void bad_page(struct page *page, const char *reason,
 	pr_alert("BUG: Bad page state in process %s  pfn:%05lx\n",
 		current->comm, page_to_pfn(page));
 	__dump_page(page, reason);
-	bad_flags &= page->flags;
-	if (bad_flags)
-		pr_alert("bad because of flags: %#lx(%pGp)\n",
-						bad_flags, &bad_flags);
 	dump_page_owner(page);
 
 	print_modules();
@@ -1077,13 +1070,9 @@ static inline bool page_expected_state(struct page *page,
 	return true;
 }
 
-static void free_pages_check_bad(struct page *page)
+static const char *page_bad_reason(struct page *page, unsigned long flags)
 {
-	const char *bad_reason;
-	unsigned long bad_flags;
-
-	bad_reason = NULL;
-	bad_flags = 0;
+	const char *bad_reason = NULL;
 
 	if (unlikely(atomic_read(&page->_mapcount) != -1))
 		bad_reason = "nonzero mapcount";
@@ -1091,24 +1080,32 @@ static void free_pages_check_bad(struct page *page)
 		bad_reason = "non-NULL mapping";
 	if (unlikely(page_ref_count(page) != 0))
 		bad_reason = "nonzero _refcount";
-	if (unlikely(page->flags & PAGE_FLAGS_CHECK_AT_FREE)) {
-		bad_reason = "PAGE_FLAGS_CHECK_AT_FREE flag(s) set";
-		bad_flags = PAGE_FLAGS_CHECK_AT_FREE;
+	if (unlikely(page->flags & flags)) {
+		if (flags == PAGE_FLAGS_CHECK_AT_PREP)
+			bad_reason = "PAGE_FLAGS_CHECK_AT_PREP flag(s) set";
+		else
+			bad_reason = "PAGE_FLAGS_CHECK_AT_FREE flag(s) set";
 	}
 #ifdef CONFIG_MEMCG
 	if (unlikely(page->mem_cgroup))
 		bad_reason = "page still charged to cgroup";
 #endif
-	bad_page(page, bad_reason, bad_flags);
+	return bad_reason;
+}
+
+static void check_free_page_bad(struct page *page)
+{
+	bad_page(page,
+		 page_bad_reason(page, PAGE_FLAGS_CHECK_AT_FREE));
 }
 
-static inline int free_pages_check(struct page *page)
+static inline int check_free_page(struct page *page)
 {
 	if (likely(page_expected_state(page, PAGE_FLAGS_CHECK_AT_FREE)))
 		return 0;
 
 	/* Something has gone sideways, find it */
-	free_pages_check_bad(page);
+	check_free_page_bad(page);
 	return 1;
 }
 
@@ -1130,7 +1127,7 @@ static int free_tail_pages_check(struct page *head_page, struct page *page)
 	case 1:
 		/* the first tail page: ->mapping may be compound_mapcount() */
 		if (unlikely(compound_mapcount(page))) {
-			bad_page(page, "nonzero compound_mapcount", 0);
+			bad_page(page, "nonzero compound_mapcount");
 			goto out;
 		}
 		break;
@@ -1142,17 +1139,17 @@ static int free_tail_pages_check(struct page *head_page, struct page *page)
 		break;
 	default:
 		if (page->mapping != TAIL_MAPPING) {
-			bad_page(page, "corrupted mapping in tail page", 0);
+			bad_page(page, "corrupted mapping in tail page");
 			goto out;
 		}
 		break;
 	}
 	if (unlikely(!PageTail(page))) {
-		bad_page(page, "PageTail not set", 0);
+		bad_page(page, "PageTail not set");
 		goto out;
 	}
 	if (unlikely(compound_head(page) != head_page)) {
-		bad_page(page, "compound_head not consistent", 0);
+		bad_page(page, "compound_head not consistent");
 		goto out;
 	}
 	ret = 0;
@@ -1194,7 +1191,7 @@ static __always_inline bool free_pages_prepare(struct page *page,
 		for (i = 1; i < (1 << order); i++) {
 			if (compound)
 				bad += free_tail_pages_check(page, page + i);
-			if (unlikely(free_pages_check(page + i))) {
+			if (unlikely(check_free_page(page + i))) {
 				bad++;
 				continue;
 			}
@@ -1206,7 +1203,7 @@ static __always_inline bool free_pages_prepare(struct page *page,
 	if (memcg_kmem_enabled() && PageKmemcg(page))
 		__memcg_kmem_uncharge_page(page, order);
 	if (check_free)
-		bad += free_pages_check(page);
+		bad += check_free_page(page);
 	if (bad)
 		return false;
 
@@ -1253,7 +1250,7 @@ static bool free_pcp_prepare(struct page *page)
 static bool bulkfree_pcp_prepare(struct page *page)
 {
 	if (debug_pagealloc_enabled_static())
-		return free_pages_check(page);
+		return check_free_page(page);
 	else
 		return false;
 }
@@ -1274,7 +1271,7 @@ static bool free_pcp_prepare(struct page *page)
 
 static bool bulkfree_pcp_prepare(struct page *page)
 {
-	return free_pages_check(page);
+	return check_free_page(page);
 }
 #endif /* CONFIG_DEBUG_VM */
 
@@ -1499,45 +1496,49 @@ void __free_pages_core(struct page *page, unsigned int order)
 	__free_pages(page, order);
 }
 
-#if defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID) || \
-	defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP)
+#ifdef CONFIG_NEED_MULTIPLE_NODES
 
 static struct mminit_pfnnid_cache early_pfnnid_cache __meminitdata;
 
-int __meminit early_pfn_to_nid(unsigned long pfn)
+#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+
+/*
+ * Required by SPARSEMEM. Given a PFN, return what node the PFN is on.
+ */
+int __meminit __early_pfn_to_nid(unsigned long pfn,
+					struct mminit_pfnnid_cache *state)
 {
-	static DEFINE_SPINLOCK(early_pfn_lock);
+	unsigned long start_pfn, end_pfn;
 	int nid;
 
-	spin_lock(&early_pfn_lock);
-	nid = __early_pfn_to_nid(pfn, &early_pfnnid_cache);
-	if (nid < 0)
-		nid = first_online_node;
-	spin_unlock(&early_pfn_lock);
+	if (state->last_start <= pfn && pfn < state->last_end)
+		return state->last_nid;
+
+	nid = memblock_search_pfn_nid(pfn, &start_pfn, &end_pfn);
+	if (nid != NUMA_NO_NODE) {
+		state->last_start = start_pfn;
+		state->last_end = end_pfn;
+		state->last_nid = nid;
+	}
 
 	return nid;
 }
-#endif
+#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
 
-#ifdef CONFIG_NODES_SPAN_OTHER_NODES
-/* Only safe to use early in boot when initialisation is single-threaded */
-static inline bool __meminit early_pfn_in_nid(unsigned long pfn, int node)
+int __meminit early_pfn_to_nid(unsigned long pfn)
 {
+	static DEFINE_SPINLOCK(early_pfn_lock);
 	int nid;
 
+	spin_lock(&early_pfn_lock);
 	nid = __early_pfn_to_nid(pfn, &early_pfnnid_cache);
-	if (nid >= 0 && nid != node)
-		return false;
-	return true;
-}
+	if (nid < 0)
+		nid = first_online_node;
+	spin_unlock(&early_pfn_lock);
 
-#else
-static inline bool __meminit early_pfn_in_nid(unsigned long pfn, int node)
-{
-	return true;
+	return nid;
 }
-#endif
-
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
 
 void __init memblock_free_pages(struct page *page, unsigned long pfn,
 							unsigned int order)
@@ -1607,6 +1608,7 @@ void set_zone_contiguous(struct zone *zone)
 		if (!__pageblock_pfn_to_page(block_start_pfn,
 					     block_end_pfn, zone))
 			return;
+		cond_resched();
 	}
 
 	/* We confirm that there is no hole */
@@ -1691,7 +1693,6 @@ static void __init deferred_free_pages(unsigned long pfn,
 		} else if (!(pfn & nr_pgmask)) {
 			deferred_free_range(pfn - nr_free, nr_free);
 			nr_free = 1;
-			touch_nmi_watchdog();
 		} else {
 			nr_free++;
 		}
@@ -1721,7 +1722,6 @@ static unsigned long  __init deferred_init_pages(struct zone *zone,
 			continue;
 		} else if (!page || !(pfn & nr_pgmask)) {
 			page = pfn_to_page(pfn);
-			touch_nmi_watchdog();
 		} else {
 			page++;
 		}
@@ -1844,6 +1844,13 @@ static int __init deferred_init_memmap(void *data)
 	BUG_ON(pgdat->first_deferred_pfn > pgdat_end_pfn(pgdat));
 	pgdat->first_deferred_pfn = ULONG_MAX;
 
+	/*
+	 * Once we unlock here, the zone cannot be grown anymore, thus if an
+	 * interrupt thread must allocate this early in boot, zone must be
+	 * pre-grown prior to start of deferred page initialization.
+	 */
+	pgdat_resize_unlock(pgdat, &flags);
+
 	/* Only the highest zone is deferred so find it */
 	for (zid = 0; zid < MAX_NR_ZONES; zid++) {
 		zone = pgdat->node_zones + zid;
@@ -1861,11 +1868,11 @@ static int __init deferred_init_memmap(void *data)
 	 * that we can avoid introducing any issues with the buddy
 	 * allocator.
 	 */
-	while (spfn < epfn)
+	while (spfn < epfn) {
 		nr_pages += deferred_init_maxorder(&i, zone, &spfn, &epfn);
+		cond_resched();
+	}
 zone_empty:
-	pgdat_resize_unlock(pgdat, &flags);
-
 	/* Sanity check that the next zone really is unpopulated */
 	WARN_ON(++zid < MAX_NR_ZONES && populated_zone(++zone));
 
@@ -1907,17 +1914,6 @@ deferred_grow_zone(struct zone *zone, unsigned int order)
 
 	pgdat_resize_lock(pgdat, &flags);
 
-	/*
-	 * If deferred pages have been initialized while we were waiting for
-	 * the lock, return true, as the zone was grown.  The caller will retry
-	 * this zone.  We won't return to this function since the caller also
-	 * has this static branch.
-	 */
-	if (!static_branch_unlikely(&deferred_pages)) {
-		pgdat_resize_unlock(pgdat, &flags);
-		return true;
-	}
-
 	/*
 	 * If someone grew this zone while we were waiting for spinlock, return
 	 * true, as there might be enough pages already.
@@ -1946,6 +1942,7 @@ deferred_grow_zone(struct zone *zone, unsigned int order)
 		first_deferred_pfn = spfn;
 
 		nr_pages += deferred_init_maxorder(&i, zone, &spfn, &epfn);
+		touch_nmi_watchdog();
 
 		/* We should only stop along section boundaries */
 		if ((first_deferred_pfn ^ spfn) < PAGES_PER_SECTION)
@@ -2091,31 +2088,14 @@ static inline void expand(struct zone *zone, struct page *page,
 
 static void check_new_page_bad(struct page *page)
 {
-	const char *bad_reason = NULL;
-	unsigned long bad_flags = 0;
-
-	if (unlikely(atomic_read(&page->_mapcount) != -1))
-		bad_reason = "nonzero mapcount";
-	if (unlikely(page->mapping != NULL))
-		bad_reason = "non-NULL mapping";
-	if (unlikely(page_ref_count(page) != 0))
-		bad_reason = "nonzero _refcount";
 	if (unlikely(page->flags & __PG_HWPOISON)) {
-		bad_reason = "HWPoisoned (hardware-corrupted)";
-		bad_flags = __PG_HWPOISON;
 		/* Don't complain about hwpoisoned pages */
 		page_mapcount_reset(page); /* remove PageBuddy */
 		return;
 	}
-	if (unlikely(page->flags & PAGE_FLAGS_CHECK_AT_PREP)) {
-		bad_reason = "PAGE_FLAGS_CHECK_AT_PREP flag set";
-		bad_flags = PAGE_FLAGS_CHECK_AT_PREP;
-	}
-#ifdef CONFIG_MEMCG
-	if (unlikely(page->mem_cgroup))
-		bad_reason = "page still charged to cgroup";
-#endif
-	bad_page(page, bad_reason, bad_flags);
+
+	bad_page(page,
+		 page_bad_reason(page, PAGE_FLAGS_CHECK_AT_PREP));
 }
 
 /*
@@ -2600,7 +2580,7 @@ static bool unreserve_highatomic_pageblock(const struct alloc_context *ac,
 	int order;
 	bool ret;
 
-	for_each_zone_zonelist_nodemask(zone, z, zonelist, ac->high_zoneidx,
+	for_each_zone_zonelist_nodemask(zone, z, zonelist, ac->highest_zoneidx,
 								ac->nodemask) {
 		/*
 		 * Preserve at least one pageblock unless memory pressure
@@ -2759,6 +2739,20 @@ __rmqueue(struct zone *zone, unsigned int order, int migratetype,
 {
 	struct page *page;
 
+#ifdef CONFIG_CMA
+	/*
+	 * Balance movable allocations between regular and CMA areas by
+	 * allocating from CMA when over half of the zone's free memory
+	 * is in the CMA area.
+	 */
+	if (migratetype == MIGRATE_MOVABLE &&
+	    zone_page_state(zone, NR_FREE_CMA_PAGES) >
+	    zone_page_state(zone, NR_FREE_PAGES) / 2) {
+		page = __rmqueue_cma_fallback(zone, order);
+		if (page)
+			return page;
+	}
+#endif
 retry:
 	page = __rmqueue_smallest(zone, order, migratetype);
 	if (unlikely(!page)) {
@@ -3455,7 +3449,7 @@ ALLOW_ERROR_INJECTION(should_fail_alloc_page, TRUE);
  * to check in the allocation paths if no pages are free.
  */
 bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
-			 int classzone_idx, unsigned int alloc_flags,
+			 int highest_zoneidx, unsigned int alloc_flags,
 			 long free_pages)
 {
 	long min = mark;
@@ -3500,7 +3494,7 @@ bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
 	 * are not met, then a high-order request also cannot go ahead
 	 * even if a suitable page happened to be free.
 	 */
-	if (free_pages <= min + z->lowmem_reserve[classzone_idx])
+	if (free_pages <= min + z->lowmem_reserve[highest_zoneidx])
 		return false;
 
 	/* If this is an order-0 request then the watermark is fine */
@@ -3533,14 +3527,15 @@ bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
 }
 
 bool zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
-		      int classzone_idx, unsigned int alloc_flags)
+		      int highest_zoneidx, unsigned int alloc_flags)
 {
-	return __zone_watermark_ok(z, order, mark, classzone_idx, alloc_flags,
+	return __zone_watermark_ok(z, order, mark, highest_zoneidx, alloc_flags,
 					zone_page_state(z, NR_FREE_PAGES));
 }
 
 static inline bool zone_watermark_fast(struct zone *z, unsigned int order,
-		unsigned long mark, int classzone_idx, unsigned int alloc_flags)
+				unsigned long mark, int highest_zoneidx,
+				unsigned int alloc_flags)
 {
 	long free_pages = zone_page_state(z, NR_FREE_PAGES);
 	long cma_pages = 0;
@@ -3558,22 +3553,23 @@ static inline bool zone_watermark_fast(struct zone *z, unsigned int order,
 	 * the caller is !atomic then it'll uselessly search the free
 	 * list. That corner case is then slower but it is harmless.
 	 */
-	if (!order && (free_pages - cma_pages) > mark + z->lowmem_reserve[classzone_idx])
+	if (!order && (free_pages - cma_pages) >
+				mark + z->lowmem_reserve[highest_zoneidx])
 		return true;
 
-	return __zone_watermark_ok(z, order, mark, classzone_idx, alloc_flags,
+	return __zone_watermark_ok(z, order, mark, highest_zoneidx, alloc_flags,
 					free_pages);
 }
 
 bool zone_watermark_ok_safe(struct zone *z, unsigned int order,
-			unsigned long mark, int classzone_idx)
+			unsigned long mark, int highest_zoneidx)
 {
 	long free_pages = zone_page_state(z, NR_FREE_PAGES);
 
 	if (z->percpu_drift_mark && free_pages < z->percpu_drift_mark)
 		free_pages = zone_page_state_snapshot(z, NR_FREE_PAGES);
 
-	return __zone_watermark_ok(z, order, mark, classzone_idx, 0,
+	return __zone_watermark_ok(z, order, mark, highest_zoneidx, 0,
 								free_pages);
 }
 
@@ -3650,8 +3646,8 @@ get_page_from_freelist(gfp_t gfp_mask, unsigned int order, int alloc_flags,
 	 */
 	no_fallback = alloc_flags & ALLOC_NOFRAGMENT;
 	z = ac->preferred_zoneref;
-	for_next_zone_zonelist_nodemask(zone, z, ac->zonelist, ac->high_zoneidx,
-								ac->nodemask) {
+	for_next_zone_zonelist_nodemask(zone, z, ac->zonelist,
+					ac->highest_zoneidx, ac->nodemask) {
 		struct page *page;
 		unsigned long mark;
 
@@ -3706,7 +3702,7 @@ get_page_from_freelist(gfp_t gfp_mask, unsigned int order, int alloc_flags,
 
 		mark = wmark_pages(zone, alloc_flags & ALLOC_WMARK_MASK);
 		if (!zone_watermark_fast(zone, order, mark,
-				       ac_classzone_idx(ac), alloc_flags)) {
+				       ac->highest_zoneidx, alloc_flags)) {
 			int ret;
 
 #ifdef CONFIG_DEFERRED_STRUCT_PAGE_INIT
@@ -3739,7 +3735,7 @@ get_page_from_freelist(gfp_t gfp_mask, unsigned int order, int alloc_flags,
 			default:
 				/* did we reclaim enough */
 				if (zone_watermark_ok(zone, order, mark,
-						ac_classzone_idx(ac), alloc_flags))
+					ac->highest_zoneidx, alloc_flags))
 					goto try_this_zone;
 
 				continue;
@@ -3898,7 +3894,7 @@ __alloc_pages_may_oom(gfp_t gfp_mask, unsigned int order,
 	if (gfp_mask & __GFP_RETRY_MAYFAIL)
 		goto out;
 	/* The OOM killer does not needlessly kill tasks for lowmem */
-	if (ac->high_zoneidx < ZONE_NORMAL)
+	if (ac->highest_zoneidx < ZONE_NORMAL)
 		goto out;
 	if (pm_suspended_storage())
 		goto out;
@@ -4101,10 +4097,10 @@ should_compact_retry(struct alloc_context *ac, unsigned int order, int alloc_fla
 	 * Let's give them a good hope and keep retrying while the order-0
 	 * watermarks are OK.
 	 */
-	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist, ac->high_zoneidx,
-					ac->nodemask) {
+	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist,
+				ac->highest_zoneidx, ac->nodemask) {
 		if (zone_watermark_ok(zone, 0, min_wmark_pages(zone),
-					ac_classzone_idx(ac), alloc_flags))
+					ac->highest_zoneidx, alloc_flags))
 			return true;
 	}
 	return false;
@@ -4228,12 +4224,12 @@ static void wake_all_kswapds(unsigned int order, gfp_t gfp_mask,
 	struct zoneref *z;
 	struct zone *zone;
 	pg_data_t *last_pgdat = NULL;
-	enum zone_type high_zoneidx = ac->high_zoneidx;
+	enum zone_type highest_zoneidx = ac->highest_zoneidx;
 
-	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist, high_zoneidx,
+	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist, highest_zoneidx,
 					ac->nodemask) {
 		if (last_pgdat != zone->zone_pgdat)
-			wakeup_kswapd(zone, gfp_mask, order, high_zoneidx);
+			wakeup_kswapd(zone, gfp_mask, order, highest_zoneidx);
 		last_pgdat = zone->zone_pgdat;
 	}
 }
@@ -4276,7 +4272,7 @@ gfp_to_alloc_flags(gfp_t gfp_mask)
 		alloc_flags |= ALLOC_HARDER;
 
 #ifdef CONFIG_CMA
-	if (gfpflags_to_migratetype(gfp_mask) == MIGRATE_MOVABLE)
+	if (gfp_migratetype(gfp_mask) == MIGRATE_MOVABLE)
 		alloc_flags |= ALLOC_CMA;
 #endif
 	return alloc_flags;
@@ -4368,8 +4364,8 @@ should_reclaim_retry(gfp_t gfp_mask, unsigned order,
 	 * request even if all reclaimable pages are considered then we are
 	 * screwed and have to go OOM.
 	 */
-	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist, ac->high_zoneidx,
-					ac->nodemask) {
+	for_each_zone_zonelist_nodemask(zone, z, ac->zonelist,
+				ac->highest_zoneidx, ac->nodemask) {
 		unsigned long available;
 		unsigned long reclaimable;
 		unsigned long min_wmark = min_wmark_pages(zone);
@@ -4383,7 +4379,7 @@ should_reclaim_retry(gfp_t gfp_mask, unsigned order,
 		 * reclaimable pages?
 		 */
 		wmark = __zone_watermark_ok(zone, order, min_wmark,
-				ac_classzone_idx(ac), alloc_flags, available);
+				ac->highest_zoneidx, alloc_flags, available);
 		trace_reclaim_retry_zone(z, order, reclaimable,
 				available, min_wmark, *no_progress_loops, wmark);
 		if (wmark) {
@@ -4502,7 +4498,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
 	 * could end up iterating over non-eligible zones endlessly.
 	 */
 	ac->preferred_zoneref = first_zones_zonelist(ac->zonelist,
-					ac->high_zoneidx, ac->nodemask);
+					ac->highest_zoneidx, ac->nodemask);
 	if (!ac->preferred_zoneref->zone)
 		goto nopage;
 
@@ -4589,7 +4585,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
 	if (!(alloc_flags & ALLOC_CPUSET) || reserve_flags) {
 		ac->nodemask = NULL;
 		ac->preferred_zoneref = first_zones_zonelist(ac->zonelist,
-					ac->high_zoneidx, ac->nodemask);
+					ac->highest_zoneidx, ac->nodemask);
 	}
 
 	/* Attempt with potentially adjusted zonelist and alloc_flags */
@@ -4723,10 +4719,10 @@ static inline bool prepare_alloc_pages(gfp_t gfp_mask, unsigned int order,
 		struct alloc_context *ac, gfp_t *alloc_mask,
 		unsigned int *alloc_flags)
 {
-	ac->high_zoneidx = gfp_zone(gfp_mask);
+	ac->highest_zoneidx = gfp_zone(gfp_mask);
 	ac->zonelist = node_zonelist(preferred_nid, gfp_mask);
 	ac->nodemask = nodemask;
-	ac->migratetype = gfpflags_to_migratetype(gfp_mask);
+	ac->migratetype = gfp_migratetype(gfp_mask);
 
 	if (cpusets_enabled()) {
 		*alloc_mask |= __GFP_HARDWALL;
@@ -4762,7 +4758,7 @@ static inline void finalise_ac(gfp_t gfp_mask, struct alloc_context *ac)
 	 * may get reset for allocations that ignore memory policies.
 	 */
 	ac->preferred_zoneref = first_zones_zonelist(ac->zonelist,
-					ac->high_zoneidx, ac->nodemask);
+					ac->highest_zoneidx, ac->nodemask);
 }
 
 /*
@@ -5531,36 +5527,17 @@ static int __parse_numa_zonelist_order(char *s)
 	return 0;
 }
 
-static __init int setup_numa_zonelist_order(char *s)
-{
-	if (!s)
-		return 0;
-
-	return __parse_numa_zonelist_order(s);
-}
-early_param("numa_zonelist_order", setup_numa_zonelist_order);
-
 char numa_zonelist_order[] = "Node";
 
 /*
  * sysctl handler for numa_zonelist_order
  */
 int numa_zonelist_order_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *length,
-		loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
-	char *str;
-	int ret;
-
-	if (!write)
-		return proc_dostring(table, write, buffer, length, ppos);
-	str = memdup_user_nul(buffer, 16);
-	if (IS_ERR(str))
-		return PTR_ERR(str);
-
-	ret = __parse_numa_zonelist_order(str);
-	kfree(str);
-	return ret;
+	if (write)
+		return __parse_numa_zonelist_order(buffer);
+	return proc_dostring(table, write, buffer, length, ppos);
 }
 
 
@@ -5680,14 +5657,13 @@ static void build_zonelists(pg_data_t *pgdat)
 {
 	static int node_order[MAX_NUMNODES];
 	int node, load, nr_nodes = 0;
-	nodemask_t used_mask;
+	nodemask_t used_mask = NODE_MASK_NONE;
 	int local_node, prev_node;
 
 	/* NUMA-aware ordering of nodes */
 	local_node = pgdat->node_id;
 	load = nr_online_nodes;
 	prev_node = local_node;
-	nodes_clear(used_mask);
 
 	memset(node_order, 0, sizeof(node_order));
 	while ((node = find_next_best_node(local_node, &used_mask)) >= 0) {
@@ -5899,7 +5875,6 @@ void __ref build_all_zonelists(pg_data_t *pgdat)
 static bool __meminit
 overlap_memmap_init(unsigned long zone, unsigned long *pfn)
 {
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 	static struct memblock_region *r;
 
 	if (mirrored_kernelcore && zone == ZONE_MOVABLE) {
@@ -5915,27 +5890,9 @@ overlap_memmap_init(unsigned long zone, unsigned long *pfn)
 			return true;
 		}
 	}
-#endif
 	return false;
 }
 
-#ifdef CONFIG_SPARSEMEM
-/* Skip PFNs that belong to non-present sections */
-static inline __meminit unsigned long next_pfn(unsigned long pfn)
-{
-	const unsigned long section_nr = pfn_to_section_nr(++pfn);
-
-	if (present_section_nr(section_nr))
-		return pfn;
-	return section_nr_to_pfn(next_present_section_nr(section_nr));
-}
-#else
-static inline __meminit unsigned long next_pfn(unsigned long pfn)
-{
-	return pfn++;
-}
-#endif
-
 /*
  * Initially all pages are reserved - free ones are freed
  * up by memblock_free_all() once the early boot process is
@@ -5975,14 +5932,6 @@ void __meminit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
 		 * function.  They do not exist on hotplugged memory.
 		 */
 		if (context == MEMMAP_EARLY) {
-			if (!early_pfn_valid(pfn)) {
-				pfn = next_pfn(pfn);
-				continue;
-			}
-			if (!early_pfn_in_nid(pfn, nid)) {
-				pfn++;
-				continue;
-			}
 			if (overlap_memmap_init(zone, &pfn))
 				continue;
 			if (defer_init(nid, pfn, end_pfn))
@@ -6098,9 +6047,23 @@ static void __meminit zone_init_free_lists(struct zone *zone)
 }
 
 void __meminit __weak memmap_init(unsigned long size, int nid,
-				  unsigned long zone, unsigned long start_pfn)
+				  unsigned long zone,
+				  unsigned long range_start_pfn)
 {
-	memmap_init_zone(size, nid, zone, start_pfn, MEMMAP_EARLY, NULL);
+	unsigned long start_pfn, end_pfn;
+	unsigned long range_end_pfn = range_start_pfn + size;
+	int i;
+
+	for_each_mem_pfn_range(i, nid, &start_pfn, &end_pfn, NULL) {
+		start_pfn = clamp(start_pfn, range_start_pfn, range_end_pfn);
+		end_pfn = clamp(end_pfn, range_start_pfn, range_end_pfn);
+
+		if (end_pfn > start_pfn) {
+			size = end_pfn - start_pfn;
+			memmap_init_zone(size, nid, zone, start_pfn,
+					 MEMMAP_EARLY, NULL);
+		}
+	}
 }
 
 static int zone_batchsize(struct zone *zone)
@@ -6298,57 +6261,6 @@ void __meminit init_currently_empty_zone(struct zone *zone,
 	zone->initialized = 1;
 }
 
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-
-/*
- * Required by SPARSEMEM. Given a PFN, return what node the PFN is on.
- */
-int __meminit __early_pfn_to_nid(unsigned long pfn,
-					struct mminit_pfnnid_cache *state)
-{
-	unsigned long start_pfn, end_pfn;
-	int nid;
-
-	if (state->last_start <= pfn && pfn < state->last_end)
-		return state->last_nid;
-
-	nid = memblock_search_pfn_nid(pfn, &start_pfn, &end_pfn);
-	if (nid != NUMA_NO_NODE) {
-		state->last_start = start_pfn;
-		state->last_end = end_pfn;
-		state->last_nid = nid;
-	}
-
-	return nid;
-}
-#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
-
-/**
- * free_bootmem_with_active_regions - Call memblock_free_early_nid for each active range
- * @nid: The node to free memory on. If MAX_NUMNODES, all nodes are freed.
- * @max_low_pfn: The highest PFN that will be passed to memblock_free_early_nid
- *
- * If an architecture guarantees that all ranges registered contain no holes
- * and may be freed, this this function may be used instead of calling
- * memblock_free_early_nid() manually.
- */
-void __init free_bootmem_with_active_regions(int nid, unsigned long max_low_pfn)
-{
-	unsigned long start_pfn, end_pfn;
-	int i, this_nid;
-
-	for_each_mem_pfn_range(i, nid, &start_pfn, &end_pfn, &this_nid) {
-		start_pfn = min(start_pfn, max_low_pfn);
-		end_pfn = min(end_pfn, max_low_pfn);
-
-		if (start_pfn < end_pfn)
-			memblock_free_early_nid(PFN_PHYS(start_pfn),
-					(end_pfn - start_pfn) << PAGE_SHIFT,
-					this_nid);
-	}
-}
-
 /**
  * sparse_memory_present_with_active_regions - Call memory_present for each active range
  * @nid: The node to call memory_present for. If MAX_NUMNODES, all nodes will be used.
@@ -6461,8 +6373,7 @@ static unsigned long __init zone_spanned_pages_in_node(int nid,
 					unsigned long node_start_pfn,
 					unsigned long node_end_pfn,
 					unsigned long *zone_start_pfn,
-					unsigned long *zone_end_pfn,
-					unsigned long *ignored)
+					unsigned long *zone_end_pfn)
 {
 	unsigned long zone_low = arch_zone_lowest_possible_pfn[zone_type];
 	unsigned long zone_high = arch_zone_highest_possible_pfn[zone_type];
@@ -6526,8 +6437,7 @@ unsigned long __init absent_pages_in_range(unsigned long start_pfn,
 static unsigned long __init zone_absent_pages_in_node(int nid,
 					unsigned long zone_type,
 					unsigned long node_start_pfn,
-					unsigned long node_end_pfn,
-					unsigned long *ignored)
+					unsigned long node_end_pfn)
 {
 	unsigned long zone_low = arch_zone_lowest_possible_pfn[zone_type];
 	unsigned long zone_high = arch_zone_highest_possible_pfn[zone_type];
@@ -6574,45 +6484,9 @@ static unsigned long __init zone_absent_pages_in_node(int nid,
 	return nr_absent;
 }
 
-#else /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-static inline unsigned long __init zone_spanned_pages_in_node(int nid,
-					unsigned long zone_type,
-					unsigned long node_start_pfn,
-					unsigned long node_end_pfn,
-					unsigned long *zone_start_pfn,
-					unsigned long *zone_end_pfn,
-					unsigned long *zones_size)
-{
-	unsigned int zone;
-
-	*zone_start_pfn = node_start_pfn;
-	for (zone = 0; zone < zone_type; zone++)
-		*zone_start_pfn += zones_size[zone];
-
-	*zone_end_pfn = *zone_start_pfn + zones_size[zone_type];
-
-	return zones_size[zone_type];
-}
-
-static inline unsigned long __init zone_absent_pages_in_node(int nid,
-						unsigned long zone_type,
-						unsigned long node_start_pfn,
-						unsigned long node_end_pfn,
-						unsigned long *zholes_size)
-{
-	if (!zholes_size)
-		return 0;
-
-	return zholes_size[zone_type];
-}
-
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-
 static void __init calculate_node_totalpages(struct pglist_data *pgdat,
 						unsigned long node_start_pfn,
-						unsigned long node_end_pfn,
-						unsigned long *zones_size,
-						unsigned long *zholes_size)
+						unsigned long node_end_pfn)
 {
 	unsigned long realtotalpages = 0, totalpages = 0;
 	enum zone_type i;
@@ -6620,17 +6494,21 @@ static void __init calculate_node_totalpages(struct pglist_data *pgdat,
 	for (i = 0; i < MAX_NR_ZONES; i++) {
 		struct zone *zone = pgdat->node_zones + i;
 		unsigned long zone_start_pfn, zone_end_pfn;
+		unsigned long spanned, absent;
 		unsigned long size, real_size;
 
-		size = zone_spanned_pages_in_node(pgdat->node_id, i,
-						  node_start_pfn,
-						  node_end_pfn,
-						  &zone_start_pfn,
-						  &zone_end_pfn,
-						  zones_size);
-		real_size = size - zone_absent_pages_in_node(pgdat->node_id, i,
-						  node_start_pfn, node_end_pfn,
-						  zholes_size);
+		spanned = zone_spanned_pages_in_node(pgdat->node_id, i,
+						     node_start_pfn,
+						     node_end_pfn,
+						     &zone_start_pfn,
+						     &zone_end_pfn);
+		absent = zone_absent_pages_in_node(pgdat->node_id, i,
+						   node_start_pfn,
+						   node_end_pfn);
+
+		size = spanned;
+		real_size = size - absent;
+
 		if (size)
 			zone->zone_start_pfn = zone_start_pfn;
 		else
@@ -6930,10 +6808,8 @@ static void __ref alloc_node_mem_map(struct pglist_data *pgdat)
 	 */
 	if (pgdat == NODE_DATA(0)) {
 		mem_map = NODE_DATA(0)->node_mem_map;
-#if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
 		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
 			mem_map -= offset;
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
 	}
 #endif
 }
@@ -6950,30 +6826,25 @@ static inline void pgdat_set_deferred_range(pg_data_t *pgdat)
 static inline void pgdat_set_deferred_range(pg_data_t *pgdat) {}
 #endif
 
-void __init free_area_init_node(int nid, unsigned long *zones_size,
-				   unsigned long node_start_pfn,
-				   unsigned long *zholes_size)
+static void __init free_area_init_node(int nid)
 {
 	pg_data_t *pgdat = NODE_DATA(nid);
 	unsigned long start_pfn = 0;
 	unsigned long end_pfn = 0;
 
 	/* pg_data_t should be reset to zero when it's allocated */
-	WARN_ON(pgdat->nr_zones || pgdat->kswapd_classzone_idx);
+	WARN_ON(pgdat->nr_zones || pgdat->kswapd_highest_zoneidx);
+
+	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
 
 	pgdat->node_id = nid;
-	pgdat->node_start_pfn = node_start_pfn;
+	pgdat->node_start_pfn = start_pfn;
 	pgdat->per_cpu_nodestats = NULL;
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+
 	pr_info("Initmem setup node %d [mem %#018Lx-%#018Lx]\n", nid,
 		(u64)start_pfn << PAGE_SHIFT,
 		end_pfn ? ((u64)end_pfn << PAGE_SHIFT) - 1 : 0);
-#else
-	start_pfn = node_start_pfn;
-#endif
-	calculate_node_totalpages(pgdat, start_pfn, end_pfn,
-				  zones_size, zholes_size);
+	calculate_node_totalpages(pgdat, start_pfn, end_pfn);
 
 	alloc_node_mem_map(pgdat);
 	pgdat_set_deferred_range(pgdat);
@@ -6981,6 +6852,11 @@ void __init free_area_init_node(int nid, unsigned long *zones_size,
 	free_area_init_core(pgdat);
 }
 
+void __init free_area_init_memoryless_node(int nid)
+{
+	free_area_init_node(nid);
+}
+
 #if !defined(CONFIG_FLAT_NODE_MEM_MAP)
 /*
  * Initialize all valid struct pages in the range [spfn, epfn) and mark them
@@ -7064,8 +6940,6 @@ static inline void __init init_unavailable_mem(void)
 }
 #endif /* !CONFIG_FLAT_NODE_MEM_MAP */
 
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-
 #if MAX_NUMNODES > 1
 /*
  * Figure out the number of possible node ids.
@@ -7129,24 +7003,6 @@ unsigned long __init node_map_pfn_alignment(void)
 	return ~accl_mask + 1;
 }
 
-/* Find the lowest pfn for a node */
-static unsigned long __init find_min_pfn_for_node(int nid)
-{
-	unsigned long min_pfn = ULONG_MAX;
-	unsigned long start_pfn;
-	int i;
-
-	for_each_mem_pfn_range(i, nid, &start_pfn, NULL, NULL)
-		min_pfn = min(min_pfn, start_pfn);
-
-	if (min_pfn == ULONG_MAX) {
-		pr_warn("Could not find start_pfn for node %d\n", nid);
-		return 0;
-	}
-
-	return min_pfn;
-}
-
 /**
  * find_min_pfn_with_active_regions - Find the minimum PFN registered
  *
@@ -7155,7 +7011,7 @@ static unsigned long __init find_min_pfn_for_node(int nid)
  */
 unsigned long __init find_min_pfn_with_active_regions(void)
 {
-	return find_min_pfn_for_node(MAX_NUMNODES);
+	return PHYS_PFN(memblock_start_of_DRAM());
 }
 
 /*
@@ -7208,7 +7064,7 @@ static void __init find_zone_movable_pfns_for_nodes(void)
 			if (!memblock_is_hotpluggable(r))
 				continue;
 
-			nid = r->nid;
+			nid = memblock_get_region_node(r);
 
 			usable_startpfn = PFN_DOWN(r->base);
 			zone_movable_pfn[nid] = zone_movable_pfn[nid] ?
@@ -7229,7 +7085,7 @@ static void __init find_zone_movable_pfns_for_nodes(void)
 			if (memblock_is_mirror(r))
 				continue;
 
-			nid = r->nid;
+			nid = memblock_get_region_node(r);
 
 			usable_startpfn = memblock_region_memory_base_pfn(r);
 
@@ -7410,7 +7266,7 @@ static void check_for_memory(pg_data_t *pgdat, int nid)
 }
 
 /**
- * free_area_init_nodes - Initialise all pg_data_t and zone data
+ * free_area_init - Initialise all pg_data_t and zone data
  * @max_zone_pfn: an array of max PFNs for each zone
  *
  * This will call free_area_init_node() for each active node in the system.
@@ -7422,10 +7278,11 @@ static void check_for_memory(pg_data_t *pgdat, int nid)
  * starts where the previous one ended. For example, ZONE_DMA32 starts
  * at arch_max_dma_pfn.
  */
-void __init free_area_init_nodes(unsigned long *max_zone_pfn)
+void __init free_area_init(unsigned long *max_zone_pfn)
 {
 	unsigned long start_pfn, end_pfn;
-	int i, nid;
+	int i, nid, zone;
+	bool descending = false;
 
 	/* Record where the zone boundaries are */
 	memset(arch_zone_lowest_possible_pfn, 0,
@@ -7435,13 +7292,26 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 
 	start_pfn = find_min_pfn_with_active_regions();
 
+	/*
+	 * Some architecturs, e.g. ARC may have ZONE_HIGHMEM below
+	 * ZONE_NORMAL. For such cases we allow max_zone_pfn sorted in the
+	 * descending order
+	 */
+	if (MAX_NR_ZONES > 1 && max_zone_pfn[0] > max_zone_pfn[1])
+		descending = true;
+
 	for (i = 0; i < MAX_NR_ZONES; i++) {
-		if (i == ZONE_MOVABLE)
+		if (descending)
+			zone = MAX_NR_ZONES - i - 1;
+		else
+			zone = i;
+
+		if (zone == ZONE_MOVABLE)
 			continue;
 
-		end_pfn = max(max_zone_pfn[i], start_pfn);
-		arch_zone_lowest_possible_pfn[i] = start_pfn;
-		arch_zone_highest_possible_pfn[i] = end_pfn;
+		end_pfn = max(max_zone_pfn[zone], start_pfn);
+		arch_zone_lowest_possible_pfn[zone] = start_pfn;
+		arch_zone_highest_possible_pfn[zone] = end_pfn;
 
 		start_pfn = end_pfn;
 	}
@@ -7494,8 +7364,7 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 	init_unavailable_mem();
 	for_each_online_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
-		free_area_init_node(nid, NULL,
-				find_min_pfn_for_node(nid), NULL);
+		free_area_init_node(nid);
 
 		/* Any memory on that node */
 		if (pgdat->node_present_pages)
@@ -7560,8 +7429,6 @@ static int __init cmdline_parse_movablecore(char *p)
 early_param("kernelcore", cmdline_parse_kernelcore);
 early_param("movablecore", cmdline_parse_movablecore);
 
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-
 void adjust_managed_page_count(struct page *page, long count)
 {
 	atomic_long_add(count, &page_zone(page)->managed_pages);
@@ -7684,13 +7551,6 @@ void __init set_dma_reserve(unsigned long new_dma_reserve)
 	dma_reserve = new_dma_reserve;
 }
 
-void __init free_area_init(unsigned long *zones_size)
-{
-	init_unavailable_mem();
-	free_area_init_node(0, zones_size,
-			__pa(PAGE_OFFSET) >> PAGE_SHIFT, NULL);
-}
-
 static int page_alloc_cpu_dead(unsigned int cpu)
 {
 
@@ -7808,9 +7668,10 @@ static void setup_per_zone_lowmem_reserve(void)
 				idx--;
 				lower_zone = pgdat->node_zones + idx;
 
-				if (sysctl_lowmem_reserve_ratio[idx] < 1) {
-					sysctl_lowmem_reserve_ratio[idx] = 0;
+				if (!sysctl_lowmem_reserve_ratio[idx] ||
+				    !zone_managed_pages(lower_zone)) {
 					lower_zone->lowmem_reserve[j] = 0;
+					continue;
 				} else {
 					lower_zone->lowmem_reserve[j] =
 						managed_pages / sysctl_lowmem_reserve_ratio[idx];
@@ -7963,7 +7824,7 @@ core_initcall(init_per_zone_wmark_min)
  *	changes.
  */
 int min_free_kbytes_sysctl_handler(struct ctl_table *table, int write,
-	void __user *buffer, size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
 	int rc;
 
@@ -7978,20 +7839,8 @@ int min_free_kbytes_sysctl_handler(struct ctl_table *table, int write,
 	return 0;
 }
 
-int watermark_boost_factor_sysctl_handler(struct ctl_table *table, int write,
-	void __user *buffer, size_t *length, loff_t *ppos)
-{
-	int rc;
-
-	rc = proc_dointvec_minmax(table, write, buffer, length, ppos);
-	if (rc)
-		return rc;
-
-	return 0;
-}
-
 int watermark_scale_factor_sysctl_handler(struct ctl_table *table, int write,
-	void __user *buffer, size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
 	int rc;
 
@@ -8021,7 +7870,7 @@ static void setup_min_unmapped_ratio(void)
 
 
 int sysctl_min_unmapped_ratio_sysctl_handler(struct ctl_table *table, int write,
-	void __user *buffer, size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
 	int rc;
 
@@ -8048,7 +7897,7 @@ static void setup_min_slab_ratio(void)
 }
 
 int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *table, int write,
-	void __user *buffer, size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
 	int rc;
 
@@ -8072,9 +7921,17 @@ int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *table, int write,
  * if in function of the boot time zone sizes.
  */
 int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *table, int write,
-	void __user *buffer, size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
+	int i;
+
 	proc_dointvec_minmax(table, write, buffer, length, ppos);
+
+	for (i = 0; i < MAX_NR_ZONES; i++) {
+		if (sysctl_lowmem_reserve_ratio[i] < 1)
+			sysctl_lowmem_reserve_ratio[i] = 0;
+	}
+
 	setup_per_zone_lowmem_reserve();
 	return 0;
 }
@@ -8094,7 +7951,7 @@ static void __zone_pcp_update(struct zone *zone)
  * pagelist can have before it gets flushed back to buddy allocator.
  */
 int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *table, int write,
-	void __user *buffer, size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
 	struct zone *zone;
 	int old_percpu_pagelist_fraction;
@@ -8238,7 +8095,7 @@ void *__init alloc_large_system_hash(const char *tablename,
 				table = memblock_alloc_raw(size,
 							   SMP_CACHE_BYTES);
 		} else if (get_order(size) >= MAX_ORDER || hashdist) {
-			table = __vmalloc(size, gfp_flags, PAGE_KERNEL);
+			table = __vmalloc(size, gfp_flags);
 			virt = true;
 		} else {
 			/*
@@ -8402,7 +8259,7 @@ static int __alloc_contig_migrate_range(struct compact_control *cc,
 					unsigned long start, unsigned long end)
 {
 	/* This function is based on compact_zone() from compaction.c. */
-	unsigned long nr_reclaimed;
+	unsigned int nr_reclaimed;
 	unsigned long pfn = start;
 	unsigned int tries = 0;
 	int ret = 0;
diff --git a/mm/page_counter.c b/mm/page_counter.c
index c56db2d5e159..e3a205275a0b 100644
--- a/mm/page_counter.c
+++ b/mm/page_counter.c
@@ -77,8 +77,8 @@ void page_counter_charge(struct page_counter *counter, unsigned long nr_pages)
 		 * This is indeed racy, but we can live with some
 		 * inaccuracy in the watermark.
 		 */
-		if (new > c->watermark)
-			c->watermark = new;
+		if (new > READ_ONCE(c->watermark))
+			WRITE_ONCE(c->watermark, new);
 	}
 }
 
@@ -119,9 +119,10 @@ bool page_counter_try_charge(struct page_counter *counter,
 			propagate_protected_usage(counter, new);
 			/*
 			 * This is racy, but we can live with some
-			 * inaccuracy in the failcnt.
+			 * inaccuracy in the failcnt which is only used
+			 * to report stats.
 			 */
-			c->failcnt++;
+			data_race(c->failcnt++);
 			*fail = c;
 			goto failed;
 		}
@@ -130,8 +131,8 @@ bool page_counter_try_charge(struct page_counter *counter,
 		 * Just like with failcnt, we can live with some
 		 * inaccuracy in the watermark.
 		 */
-		if (new > c->watermark)
-			c->watermark = new;
+		if (new > READ_ONCE(c->watermark))
+			WRITE_ONCE(c->watermark, new);
 	}
 	return true;
 
diff --git a/mm/page_io.c b/mm/page_io.c
index 76965be1d40e..26935db0676c 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -86,7 +86,7 @@ static void swap_slot_free_notify(struct page *page)
 		return;
 
 	sis = page_swap_info(page);
-	if (!(sis->flags & SWP_BLKDEV))
+	if (data_race(!(sis->flags & SWP_BLKDEV)))
 		return;
 
 	/*
@@ -286,7 +286,7 @@ int __swap_writepage(struct page *page, struct writeback_control *wbc,
 	struct swap_info_struct *sis = page_swap_info(page);
 
 	VM_BUG_ON_PAGE(!PageSwapCache(page), page);
-	if (sis->flags & SWP_FS) {
+	if (data_race(sis->flags & SWP_FS)) {
 		struct kiocb kiocb;
 		struct file *swap_file = sis->swap_file;
 		struct address_space *mapping = swap_file->f_mapping;
@@ -377,7 +377,7 @@ int swap_readpage(struct page *page, bool synchronous)
 		goto out;
 	}
 
-	if (sis->flags & SWP_FS) {
+	if (data_race(sis->flags & SWP_FS)) {
 		struct file *swap_file = sis->swap_file;
 		struct address_space *mapping = swap_file->f_mapping;
 
@@ -439,7 +439,7 @@ int swap_set_page_dirty(struct page *page)
 {
 	struct swap_info_struct *sis = page_swap_info(page);
 
-	if (sis->flags & SWP_FS) {
+	if (data_race(sis->flags & SWP_FS)) {
 		struct address_space *mapping = sis->swap_file->f_mapping;
 
 		VM_BUG_ON_PAGE(!PageSwapCache(page), page);
diff --git a/mm/page_owner.c b/mm/page_owner.c
index 18ecde9f45b2..360461509423 100644
--- a/mm/page_owner.c
+++ b/mm/page_owner.c
@@ -312,8 +312,7 @@ void pagetypeinfo_showmixedcount_print(struct seq_file *m,
 				continue;
 
 			page_owner = get_page_owner(page_ext);
-			page_mt = gfpflags_to_migratetype(
-					page_owner->gfp_mask);
+			page_mt = gfp_migratetype(page_owner->gfp_mask);
 			if (pageblock_mt != page_mt) {
 				if (is_migrate_cma(pageblock_mt))
 					count[MIGRATE_MOVABLE]++;
@@ -359,7 +358,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
 
 	/* Print information relevant to grouping pages by mobility */
 	pageblock_mt = get_pageblock_migratetype(page);
-	page_mt  = gfpflags_to_migratetype(page_owner->gfp_mask);
+	page_mt  = gfp_migratetype(page_owner->gfp_mask);
 	ret += snprintf(kbuf + ret, count - ret,
 			"PFN %lu type %s Block %lu type %s Flags %#lx(%pGp)\n",
 			pfn,
@@ -416,7 +415,7 @@ void __dump_page_owner(struct page *page)
 
 	page_owner = get_page_owner(page_ext);
 	gfp_mask = page_owner->gfp_mask;
-	mt = gfpflags_to_migratetype(gfp_mask);
+	mt = gfp_migratetype(gfp_mask);
 
 	if (!test_bit(PAGE_EXT_OWNER, &page_ext->flags)) {
 		pr_alert("page_owner info is not present (never set?)\n");
diff --git a/mm/percpu.c b/mm/percpu.c
index d7e3bc649f4e..1e278099e185 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -481,7 +481,7 @@ static void *pcpu_mem_zalloc(size_t size, gfp_t gfp)
 	if (size <= PAGE_SIZE)
 		return kzalloc(size, gfp);
 	else
-		return __vmalloc(size, gfp | __GFP_ZERO, PAGE_KERNEL);
+		return __vmalloc(size, gfp | __GFP_ZERO);
 }
 
 /**
diff --git a/mm/pgtable-generic.c b/mm/pgtable-generic.c
index 3d7c01e76efc..d18f0e1b6792 100644
--- a/mm/pgtable-generic.c
+++ b/mm/pgtable-generic.c
@@ -194,7 +194,7 @@ pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
 pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 		     pmd_t *pmdp)
 {
-	pmd_t old = pmdp_establish(vma, address, pmdp, pmd_mknotpresent(*pmdp));
+	pmd_t old = pmdp_establish(vma, address, pmdp, pmd_mkinvalid(*pmdp));
 	flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
 	return old;
 }
diff --git a/mm/readahead.c b/mm/readahead.c
index 2fe72cd29b47..3c9a8dd7c56c 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -22,6 +22,7 @@
 #include <linux/mm_inline.h>
 #include <linux/blk-cgroup.h>
 #include <linux/fadvise.h>
+#include <linux/sched/mm.h>
 
 #include "internal.h"
 
@@ -113,94 +114,126 @@ int read_cache_pages(struct address_space *mapping, struct list_head *pages,
 
 EXPORT_SYMBOL(read_cache_pages);
 
-static int read_pages(struct address_space *mapping, struct file *filp,
-		struct list_head *pages, unsigned int nr_pages, gfp_t gfp)
+static void read_pages(struct readahead_control *rac, struct list_head *pages,
+		bool skip_page)
 {
+	const struct address_space_operations *aops = rac->mapping->a_ops;
+	struct page *page;
 	struct blk_plug plug;
-	unsigned page_idx;
-	int ret;
+
+	if (!readahead_count(rac))
+		goto out;
 
 	blk_start_plug(&plug);
 
-	if (mapping->a_ops->readpages) {
-		ret = mapping->a_ops->readpages(filp, mapping, pages, nr_pages);
+	if (aops->readahead) {
+		aops->readahead(rac);
+		/* Clean up the remaining pages */
+		while ((page = readahead_page(rac))) {
+			unlock_page(page);
+			put_page(page);
+		}
+	} else if (aops->readpages) {
+		aops->readpages(rac->file, rac->mapping, pages,
+				readahead_count(rac));
 		/* Clean up the remaining pages */
 		put_pages_list(pages);
-		goto out;
-	}
-
-	for (page_idx = 0; page_idx < nr_pages; page_idx++) {
-		struct page *page = lru_to_page(pages);
-		list_del(&page->lru);
-		if (!add_to_page_cache_lru(page, mapping, page->index, gfp))
-			mapping->a_ops->readpage(filp, page);
-		put_page(page);
+		rac->_index += rac->_nr_pages;
+		rac->_nr_pages = 0;
+	} else {
+		while ((page = readahead_page(rac))) {
+			aops->readpage(rac->file, page);
+			put_page(page);
+		}
 	}
-	ret = 0;
 
-out:
 	blk_finish_plug(&plug);
 
-	return ret;
+	BUG_ON(!list_empty(pages));
+	BUG_ON(readahead_count(rac));
+
+out:
+	if (skip_page)
+		rac->_index++;
 }
 
-/*
- * __do_page_cache_readahead() actually reads a chunk of disk.  It allocates
- * the pages first, then submits them for I/O. This avoids the very bad
- * behaviour which would occur if page allocations are causing VM writeback.
- * We really don't want to intermingle reads and writes like that.
+/**
+ * page_cache_readahead_unbounded - Start unchecked readahead.
+ * @mapping: File address space.
+ * @file: This instance of the open file; used for authentication.
+ * @index: First page index to read.
+ * @nr_to_read: The number of pages to read.
+ * @lookahead_size: Where to start the next readahead.
  *
- * Returns the number of pages requested, or the maximum amount of I/O allowed.
+ * This function is for filesystems to call when they want to start
+ * readahead beyond a file's stated i_size.  This is almost certainly
+ * not the function you want to call.  Use page_cache_async_readahead()
+ * or page_cache_sync_readahead() instead.
+ *
+ * Context: File is referenced by caller.  Mutexes may be held by caller.
+ * May sleep, but will not reenter filesystem to reclaim memory.
  */
-unsigned int __do_page_cache_readahead(struct address_space *mapping,
-		struct file *filp, pgoff_t offset, unsigned long nr_to_read,
+void page_cache_readahead_unbounded(struct address_space *mapping,
+		struct file *file, pgoff_t index, unsigned long nr_to_read,
 		unsigned long lookahead_size)
 {
-	struct inode *inode = mapping->host;
-	struct page *page;
-	unsigned long end_index;	/* The last page we want to read */
 	LIST_HEAD(page_pool);
-	int page_idx;
-	unsigned int nr_pages = 0;
-	loff_t isize = i_size_read(inode);
 	gfp_t gfp_mask = readahead_gfp_mask(mapping);
+	struct readahead_control rac = {
+		.mapping = mapping,
+		.file = file,
+		._index = index,
+	};
+	unsigned long i;
 
-	if (isize == 0)
-		goto out;
-
-	end_index = ((isize - 1) >> PAGE_SHIFT);
+	/*
+	 * Partway through the readahead operation, we will have added
+	 * locked pages to the page cache, but will not yet have submitted
+	 * them for I/O.  Adding another page may need to allocate memory,
+	 * which can trigger memory reclaim.  Telling the VM we're in
+	 * the middle of a filesystem operation will cause it to not
+	 * touch file-backed pages, preventing a deadlock.  Most (all?)
+	 * filesystems already specify __GFP_NOFS in their mapping's
+	 * gfp_mask, but let's be explicit here.
+	 */
+	unsigned int nofs = memalloc_nofs_save();
 
 	/*
 	 * Preallocate as many pages as we will need.
 	 */
-	for (page_idx = 0; page_idx < nr_to_read; page_idx++) {
-		pgoff_t page_offset = offset + page_idx;
+	for (i = 0; i < nr_to_read; i++) {
+		struct page *page = xa_load(&mapping->i_pages, index + i);
 
-		if (page_offset > end_index)
-			break;
+		BUG_ON(index + i != rac._index + rac._nr_pages);
 
-		page = xa_load(&mapping->i_pages, page_offset);
 		if (page && !xa_is_value(page)) {
 			/*
-			 * Page already present?  Kick off the current batch of
-			 * contiguous pages before continuing with the next
-			 * batch.
+			 * Page already present?  Kick off the current batch
+			 * of contiguous pages before continuing with the
+			 * next batch.  This page may be the one we would
+			 * have intended to mark as Readahead, but we don't
+			 * have a stable reference to this page, and it's
+			 * not worth getting one just for that.
 			 */
-			if (nr_pages)
-				read_pages(mapping, filp, &page_pool, nr_pages,
-						gfp_mask);
-			nr_pages = 0;
+			read_pages(&rac, &page_pool, true);
 			continue;
 		}
 
 		page = __page_cache_alloc(gfp_mask);
 		if (!page)
 			break;
-		page->index = page_offset;
-		list_add(&page->lru, &page_pool);
-		if (page_idx == nr_to_read - lookahead_size)
+		if (mapping->a_ops->readpages) {
+			page->index = index + i;
+			list_add(&page->lru, &page_pool);
+		} else if (add_to_page_cache_lru(page, mapping, index + i,
+					gfp_mask) < 0) {
+			put_page(page);
+			read_pages(&rac, &page_pool, true);
+			continue;
+		}
+		if (i == nr_to_read - lookahead_size)
 			SetPageReadahead(page);
-		nr_pages++;
+		rac._nr_pages++;
 	}
 
 	/*
@@ -208,26 +241,53 @@ unsigned int __do_page_cache_readahead(struct address_space *mapping,
 	 * uptodate then the caller will launch readpage again, and
 	 * will then handle the error.
 	 */
-	if (nr_pages)
-		read_pages(mapping, filp, &page_pool, nr_pages, gfp_mask);
-	BUG_ON(!list_empty(&page_pool));
-out:
-	return nr_pages;
+	read_pages(&rac, &page_pool, false);
+	memalloc_nofs_restore(nofs);
+}
+EXPORT_SYMBOL_GPL(page_cache_readahead_unbounded);
+
+/*
+ * __do_page_cache_readahead() actually reads a chunk of disk.  It allocates
+ * the pages first, then submits them for I/O. This avoids the very bad
+ * behaviour which would occur if page allocations are causing VM writeback.
+ * We really don't want to intermingle reads and writes like that.
+ */
+void __do_page_cache_readahead(struct address_space *mapping,
+		struct file *file, pgoff_t index, unsigned long nr_to_read,
+		unsigned long lookahead_size)
+{
+	struct inode *inode = mapping->host;
+	loff_t isize = i_size_read(inode);
+	pgoff_t end_index;	/* The last page we want to read */
+
+	if (isize == 0)
+		return;
+
+	end_index = (isize - 1) >> PAGE_SHIFT;
+	if (index > end_index)
+		return;
+	/* Don't read past the page containing the last byte of the file */
+	if (nr_to_read > end_index - index)
+		nr_to_read = end_index - index + 1;
+
+	page_cache_readahead_unbounded(mapping, file, index, nr_to_read,
+			lookahead_size);
 }
 
 /*
  * Chunk the readahead into 2 megabyte units, so that we don't pin too much
  * memory at once.
  */
-int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
-			       pgoff_t offset, unsigned long nr_to_read)
+void force_page_cache_readahead(struct address_space *mapping,
+		struct file *filp, pgoff_t index, unsigned long nr_to_read)
 {
 	struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
 	struct file_ra_state *ra = &filp->f_ra;
 	unsigned long max_pages;
 
-	if (unlikely(!mapping->a_ops->readpage && !mapping->a_ops->readpages))
-		return -EINVAL;
+	if (unlikely(!mapping->a_ops->readpage && !mapping->a_ops->readpages &&
+			!mapping->a_ops->readahead))
+		return;
 
 	/*
 	 * If the request exceeds the readahead window, allow the read to
@@ -240,12 +300,11 @@ int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
 
 		if (this_chunk > nr_to_read)
 			this_chunk = nr_to_read;
-		__do_page_cache_readahead(mapping, filp, offset, this_chunk, 0);
+		__do_page_cache_readahead(mapping, filp, index, this_chunk, 0);
 
-		offset += this_chunk;
+		index += this_chunk;
 		nr_to_read -= this_chunk;
 	}
-	return 0;
 }
 
 /*
@@ -324,21 +383,21 @@ static unsigned long get_next_ra_size(struct file_ra_state *ra,
  */
 
 /*
- * Count contiguously cached pages from @offset-1 to @offset-@max,
+ * Count contiguously cached pages from @index-1 to @index-@max,
  * this count is a conservative estimation of
  * 	- length of the sequential read sequence, or
  * 	- thrashing threshold in memory tight systems
  */
 static pgoff_t count_history_pages(struct address_space *mapping,
-				   pgoff_t offset, unsigned long max)
+				   pgoff_t index, unsigned long max)
 {
 	pgoff_t head;
 
 	rcu_read_lock();
-	head = page_cache_prev_miss(mapping, offset - 1, max);
+	head = page_cache_prev_miss(mapping, index - 1, max);
 	rcu_read_unlock();
 
-	return offset - 1 - head;
+	return index - 1 - head;
 }
 
 /*
@@ -346,13 +405,13 @@ static pgoff_t count_history_pages(struct address_space *mapping,
  */
 static int try_context_readahead(struct address_space *mapping,
 				 struct file_ra_state *ra,
-				 pgoff_t offset,
+				 pgoff_t index,
 				 unsigned long req_size,
 				 unsigned long max)
 {
 	pgoff_t size;
 
-	size = count_history_pages(mapping, offset, max);
+	size = count_history_pages(mapping, index, max);
 
 	/*
 	 * not enough history pages:
@@ -365,10 +424,10 @@ static int try_context_readahead(struct address_space *mapping,
 	 * starts from beginning of file:
 	 * it is a strong indication of long-run stream (or whole-file-read)
 	 */
-	if (size >= offset)
+	if (size >= index)
 		size *= 2;
 
-	ra->start = offset;
+	ra->start = index;
 	ra->size = min(size + req_size, max);
 	ra->async_size = 1;
 
@@ -378,16 +437,15 @@ static int try_context_readahead(struct address_space *mapping,
 /*
  * A minimal readahead algorithm for trivial sequential/random reads.
  */
-static unsigned long
-ondemand_readahead(struct address_space *mapping,
-		   struct file_ra_state *ra, struct file *filp,
-		   bool hit_readahead_marker, pgoff_t offset,
-		   unsigned long req_size)
+static void ondemand_readahead(struct address_space *mapping,
+		struct file_ra_state *ra, struct file *filp,
+		bool hit_readahead_marker, pgoff_t index,
+		unsigned long req_size)
 {
 	struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
 	unsigned long max_pages = ra->ra_pages;
 	unsigned long add_pages;
-	pgoff_t prev_offset;
+	pgoff_t prev_index;
 
 	/*
 	 * If the request exceeds the readahead window, allow the read to
@@ -399,15 +457,15 @@ ondemand_readahead(struct address_space *mapping,
 	/*
 	 * start of file
 	 */
-	if (!offset)
+	if (!index)
 		goto initial_readahead;
 
 	/*
-	 * It's the expected callback offset, assume sequential access.
+	 * It's the expected callback index, assume sequential access.
 	 * Ramp up sizes, and push forward the readahead window.
 	 */
-	if ((offset == (ra->start + ra->size - ra->async_size) ||
-	     offset == (ra->start + ra->size))) {
+	if ((index == (ra->start + ra->size - ra->async_size) ||
+	     index == (ra->start + ra->size))) {
 		ra->start += ra->size;
 		ra->size = get_next_ra_size(ra, max_pages);
 		ra->async_size = ra->size;
@@ -424,14 +482,14 @@ ondemand_readahead(struct address_space *mapping,
 		pgoff_t start;
 
 		rcu_read_lock();
-		start = page_cache_next_miss(mapping, offset + 1, max_pages);
+		start = page_cache_next_miss(mapping, index + 1, max_pages);
 		rcu_read_unlock();
 
-		if (!start || start - offset > max_pages)
-			return 0;
+		if (!start || start - index > max_pages)
+			return;
 
 		ra->start = start;
-		ra->size = start - offset;	/* old async_size */
+		ra->size = start - index;	/* old async_size */
 		ra->size += req_size;
 		ra->size = get_next_ra_size(ra, max_pages);
 		ra->async_size = ra->size;
@@ -446,28 +504,29 @@ ondemand_readahead(struct address_space *mapping,
 
 	/*
 	 * sequential cache miss
-	 * trivial case: (offset - prev_offset) == 1
-	 * unaligned reads: (offset - prev_offset) == 0
+	 * trivial case: (index - prev_index) == 1
+	 * unaligned reads: (index - prev_index) == 0
 	 */
-	prev_offset = (unsigned long long)ra->prev_pos >> PAGE_SHIFT;
-	if (offset - prev_offset <= 1UL)
+	prev_index = (unsigned long long)ra->prev_pos >> PAGE_SHIFT;
+	if (index - prev_index <= 1UL)
 		goto initial_readahead;
 
 	/*
 	 * Query the page cache and look for the traces(cached history pages)
 	 * that a sequential stream would leave behind.
 	 */
-	if (try_context_readahead(mapping, ra, offset, req_size, max_pages))
+	if (try_context_readahead(mapping, ra, index, req_size, max_pages))
 		goto readit;
 
 	/*
 	 * standalone, small random read
 	 * Read as is, and do not pollute the readahead state.
 	 */
-	return __do_page_cache_readahead(mapping, filp, offset, req_size, 0);
+	__do_page_cache_readahead(mapping, filp, index, req_size, 0);
+	return;
 
 initial_readahead:
-	ra->start = offset;
+	ra->start = index;
 	ra->size = get_init_ra_size(req_size, max_pages);
 	ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size;
 
@@ -478,7 +537,7 @@ ondemand_readahead(struct address_space *mapping,
 	 * the resulted next readahead window into the current one.
 	 * Take care of maximum IO pages as above.
 	 */
-	if (offset == ra->start && ra->size == ra->async_size) {
+	if (index == ra->start && ra->size == ra->async_size) {
 		add_pages = get_next_ra_size(ra, max_pages);
 		if (ra->size + add_pages <= max_pages) {
 			ra->async_size = add_pages;
@@ -489,7 +548,7 @@ ondemand_readahead(struct address_space *mapping,
 		}
 	}
 
-	return ra_submit(ra, mapping, filp);
+	ra_submit(ra, mapping, filp);
 }
 
 /**
@@ -497,9 +556,8 @@ ondemand_readahead(struct address_space *mapping,
  * @mapping: address_space which holds the pagecache and I/O vectors
  * @ra: file_ra_state which holds the readahead state
  * @filp: passed on to ->readpage() and ->readpages()
- * @offset: start offset into @mapping, in pagecache page-sized units
- * @req_size: hint: total size of the read which the caller is performing in
- *            pagecache pages
+ * @index: Index of first page to be read.
+ * @req_count: Total number of pages being read by the caller.
  *
  * page_cache_sync_readahead() should be called when a cache miss happened:
  * it will submit the read.  The readahead logic may decide to piggyback more
@@ -508,7 +566,7 @@ ondemand_readahead(struct address_space *mapping,
  */
 void page_cache_sync_readahead(struct address_space *mapping,
 			       struct file_ra_state *ra, struct file *filp,
-			       pgoff_t offset, unsigned long req_size)
+			       pgoff_t index, unsigned long req_count)
 {
 	/* no read-ahead */
 	if (!ra->ra_pages)
@@ -519,12 +577,12 @@ void page_cache_sync_readahead(struct address_space *mapping,
 
 	/* be dumb */
 	if (filp && (filp->f_mode & FMODE_RANDOM)) {
-		force_page_cache_readahead(mapping, filp, offset, req_size);
+		force_page_cache_readahead(mapping, filp, index, req_count);
 		return;
 	}
 
 	/* do read-ahead */
-	ondemand_readahead(mapping, ra, filp, false, offset, req_size);
+	ondemand_readahead(mapping, ra, filp, false, index, req_count);
 }
 EXPORT_SYMBOL_GPL(page_cache_sync_readahead);
 
@@ -533,21 +591,20 @@ EXPORT_SYMBOL_GPL(page_cache_sync_readahead);
  * @mapping: address_space which holds the pagecache and I/O vectors
  * @ra: file_ra_state which holds the readahead state
  * @filp: passed on to ->readpage() and ->readpages()
- * @page: the page at @offset which has the PG_readahead flag set
- * @offset: start offset into @mapping, in pagecache page-sized units
- * @req_size: hint: total size of the read which the caller is performing in
- *            pagecache pages
+ * @page: The page at @index which triggered the readahead call.
+ * @index: Index of first page to be read.
+ * @req_count: Total number of pages being read by the caller.
  *
  * page_cache_async_readahead() should be called when a page is used which
- * has the PG_readahead flag; this is a marker to suggest that the application
+ * is marked as PageReadahead; this is a marker to suggest that the application
  * has used up enough of the readahead window that we should start pulling in
  * more pages.
  */
 void
 page_cache_async_readahead(struct address_space *mapping,
 			   struct file_ra_state *ra, struct file *filp,
-			   struct page *page, pgoff_t offset,
-			   unsigned long req_size)
+			   struct page *page, pgoff_t index,
+			   unsigned long req_count)
 {
 	/* no read-ahead */
 	if (!ra->ra_pages)
@@ -571,7 +628,7 @@ page_cache_async_readahead(struct address_space *mapping,
 		return;
 
 	/* do read-ahead */
-	ondemand_readahead(mapping, ra, filp, true, offset, req_size);
+	ondemand_readahead(mapping, ra, filp, true, index, req_count);
 }
 EXPORT_SYMBOL_GPL(page_cache_async_readahead);
 
diff --git a/mm/rmap.c b/mm/rmap.c
index f79a206b271a..2126fd4a254b 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -672,7 +672,7 @@ static bool should_defer_flush(struct mm_struct *mm, enum ttu_flags flags)
  */
 void flush_tlb_batched_pending(struct mm_struct *mm)
 {
-	if (mm->tlb_flush_batched) {
+	if (data_race(mm->tlb_flush_batched)) {
 		flush_tlb_mm(mm);
 
 		/*
diff --git a/mm/slab.c b/mm/slab.c
index a89633603b2d..9350062ffc1a 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3106,7 +3106,7 @@ static void *fallback_alloc(struct kmem_cache *cache, gfp_t flags)
 	struct zonelist *zonelist;
 	struct zoneref *z;
 	struct zone *zone;
-	enum zone_type high_zoneidx = gfp_zone(flags);
+	enum zone_type highest_zoneidx = gfp_zone(flags);
 	void *obj = NULL;
 	struct page *page;
 	int nid;
@@ -3124,7 +3124,7 @@ static void *fallback_alloc(struct kmem_cache *cache, gfp_t flags)
 	 * Look through allowed nodes for objects available
 	 * from existing per node queues.
 	 */
-	for_each_zone_zonelist(zone, z, zonelist, high_zoneidx) {
+	for_each_zone_zonelist(zone, z, zonelist, highest_zoneidx) {
 		nid = zone_to_nid(zone);
 
 		if (cpuset_zone_allowed(zone, flags) &&
diff --git a/mm/slab.h b/mm/slab.h
index 207c83ef6e06..815e4e9a94cd 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -34,7 +34,7 @@ struct kmem_cache {
 
 struct memcg_cache_array {
 	struct rcu_head rcu;
-	struct kmem_cache *entries[0];
+	struct kmem_cache *entries[];
 };
 
 /*
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 23c7500eea7d..9e72ba224175 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -1303,7 +1303,8 @@ void __init create_kmalloc_caches(slab_flags_t flags)
 			kmalloc_caches[KMALLOC_DMA][i] = create_kmalloc_cache(
 				kmalloc_info[i].name[KMALLOC_DMA],
 				kmalloc_info[i].size,
-				SLAB_CACHE_DMA | flags, 0, 0);
+				SLAB_CACHE_DMA | flags, 0,
+				kmalloc_info[i].size);
 		}
 	}
 #endif
diff --git a/mm/slob.c b/mm/slob.c
index fa53e9f73893..ac2aecfbc7a8 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -524,6 +524,7 @@ void *__kmalloc_track_caller(size_t size, gfp_t gfp, unsigned long caller)
 {
 	return __do_kmalloc_node(size, gfp, NUMA_NO_NODE, caller);
 }
+EXPORT_SYMBOL(__kmalloc_track_caller);
 
 #ifdef CONFIG_NUMA
 void *__kmalloc_node_track_caller(size_t size, gfp_t gfp,
@@ -531,6 +532,7 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t gfp,
 {
 	return __do_kmalloc_node(size, gfp, node, caller);
 }
+EXPORT_SYMBOL(__kmalloc_node_track_caller);
 #endif
 
 void kfree(const void *block)
diff --git a/mm/slub.c b/mm/slub.c
index 9bf44955c4f1..03e063cd979f 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -551,15 +551,32 @@ static void print_section(char *level, char *text, u8 *addr,
 	metadata_access_disable();
 }
 
+/*
+ * See comment in calculate_sizes().
+ */
+static inline bool freeptr_outside_object(struct kmem_cache *s)
+{
+	return s->offset >= s->inuse;
+}
+
+/*
+ * Return offset of the end of info block which is inuse + free pointer if
+ * not overlapping with object.
+ */
+static inline unsigned int get_info_end(struct kmem_cache *s)
+{
+	if (freeptr_outside_object(s))
+		return s->inuse + sizeof(void *);
+	else
+		return s->inuse;
+}
+
 static struct track *get_track(struct kmem_cache *s, void *object,
 	enum track_item alloc)
 {
 	struct track *p;
 
-	if (s->offset)
-		p = object + s->offset + sizeof(void *);
-	else
-		p = object + s->inuse;
+	p = object + get_info_end(s);
 
 	return p + alloc;
 }
@@ -662,6 +679,20 @@ static void slab_fix(struct kmem_cache *s, char *fmt, ...)
 	va_end(args);
 }
 
+static bool freelist_corrupted(struct kmem_cache *s, struct page *page,
+			       void *freelist, void *nextfree)
+{
+	if ((s->flags & SLAB_CONSISTENCY_CHECKS) &&
+	    !check_valid_pointer(s, page, nextfree)) {
+		object_err(s, page, freelist, "Freechain corrupt");
+		freelist = NULL;
+		slab_fix(s, "Isolate corrupted freechain");
+		return true;
+	}
+
+	return false;
+}
+
 static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
 {
 	unsigned int off;	/* Offset of last byte */
@@ -686,10 +717,7 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
 		print_section(KERN_ERR, "Redzone ", p + s->object_size,
 			s->inuse - s->object_size);
 
-	if (s->offset)
-		off = s->offset + sizeof(void *);
-	else
-		off = s->inuse;
+	off = get_info_end(s);
 
 	if (s->flags & SLAB_STORE_USER)
 		off += 2 * sizeof(struct track);
@@ -782,7 +810,7 @@ static int check_bytes_and_report(struct kmem_cache *s, struct page *page,
  * object address
  * 	Bytes of the object to be managed.
  * 	If the freepointer may overlay the object then the free
- * 	pointer is the first word of the object.
+ *	pointer is at the middle of the object.
  *
  * 	Poisoning uses 0x6b (POISON_FREE) and the last byte is
  * 	0xa5 (POISON_END)
@@ -816,11 +844,7 @@ static int check_bytes_and_report(struct kmem_cache *s, struct page *page,
 
 static int check_pad_bytes(struct kmem_cache *s, struct page *page, u8 *p)
 {
-	unsigned long off = s->inuse;	/* The end of info */
-
-	if (s->offset)
-		/* Freepointer is placed after the object. */
-		off += sizeof(void *);
+	unsigned long off = get_info_end(s);	/* The end of info */
 
 	if (s->flags & SLAB_STORE_USER)
 		/* We also have user information there */
@@ -907,7 +931,7 @@ static int check_object(struct kmem_cache *s, struct page *page,
 		check_pad_bytes(s, page, p);
 	}
 
-	if (!s->offset && val == SLUB_RED_ACTIVE)
+	if (!freeptr_outside_object(s) && val == SLUB_RED_ACTIVE)
 		/*
 		 * Object and freepointer overlap. Cannot check
 		 * freepointer while object is allocated.
@@ -1400,6 +1424,11 @@ static inline void inc_slabs_node(struct kmem_cache *s, int node,
 static inline void dec_slabs_node(struct kmem_cache *s, int node,
 							int objects) {}
 
+static bool freelist_corrupted(struct kmem_cache *s, struct page *page,
+			       void *freelist, void *nextfree)
+{
+	return false;
+}
 #endif /* CONFIG_SLUB_DEBUG */
 
 /*
@@ -1909,7 +1938,7 @@ static void *get_any_partial(struct kmem_cache *s, gfp_t flags,
 	struct zonelist *zonelist;
 	struct zoneref *z;
 	struct zone *zone;
-	enum zone_type high_zoneidx = gfp_zone(flags);
+	enum zone_type highest_zoneidx = gfp_zone(flags);
 	void *object;
 	unsigned int cpuset_mems_cookie;
 
@@ -1938,7 +1967,7 @@ static void *get_any_partial(struct kmem_cache *s, gfp_t flags,
 	do {
 		cpuset_mems_cookie = read_mems_allowed_begin();
 		zonelist = node_zonelist(mempolicy_slab_node(), flags);
-		for_each_zone_zonelist(zone, z, zonelist, high_zoneidx) {
+		for_each_zone_zonelist(zone, z, zonelist, highest_zoneidx) {
 			struct kmem_cache_node *n;
 
 			n = get_node(s, zone_to_nid(zone));
@@ -1984,7 +2013,7 @@ static void *get_partial(struct kmem_cache *s, gfp_t flags, int node,
 
 #ifdef CONFIG_PREEMPTION
 /*
- * Calculate the next globally unique transaction for disambiguiation
+ * Calculate the next globally unique transaction for disambiguation
  * during cmpxchg. The transactions start with the cpu number and are then
  * incremented by CONFIG_NR_CPUS.
  */
@@ -2083,6 +2112,14 @@ static void deactivate_slab(struct kmem_cache *s, struct page *page,
 		void *prior;
 		unsigned long counters;
 
+		/*
+		 * If 'nextfree' is invalid, it is possible that the object at
+		 * 'freelist' is already corrupted.  So isolate all objects
+		 * starting at 'freelist'.
+		 */
+		if (freelist_corrupted(s, page, freelist, nextfree))
+			break;
+
 		do {
 			prior = page->freelist;
 			counters = page->counters;
@@ -3587,6 +3624,11 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
 		 *
 		 * This is the case if we do RCU, have a constructor or
 		 * destructor or are poisoning the objects.
+		 *
+		 * The assumption that s->offset >= s->inuse means free
+		 * pointer is outside of the object is used in the
+		 * freeptr_outside_object() function. If that is no
+		 * longer true, the function needs to be modified.
 		 */
 		s->offset = size;
 		size += sizeof(void *);
@@ -3724,12 +3766,14 @@ static int kmem_cache_open(struct kmem_cache *s, slab_flags_t flags)
 }
 
 static void list_slab_objects(struct kmem_cache *s, struct page *page,
-							const char *text)
+			      const char *text, unsigned long *map)
 {
 #ifdef CONFIG_SLUB_DEBUG
 	void *addr = page_address(page);
 	void *p;
-	unsigned long *map;
+
+	if (!map)
+		return;
 
 	slab_err(s, page, text, s->name);
 	slab_lock(page);
@@ -3742,8 +3786,6 @@ static void list_slab_objects(struct kmem_cache *s, struct page *page,
 			print_tracking(s, p);
 		}
 	}
-	put_map(map);
-
 	slab_unlock(page);
 #endif
 }
@@ -3757,6 +3799,11 @@ static void free_partial(struct kmem_cache *s, struct kmem_cache_node *n)
 {
 	LIST_HEAD(discard);
 	struct page *page, *h;
+	unsigned long *map = NULL;
+
+#ifdef CONFIG_SLUB_DEBUG
+	map = bitmap_alloc(oo_objects(s->max), GFP_KERNEL);
+#endif
 
 	BUG_ON(irqs_disabled());
 	spin_lock_irq(&n->list_lock);
@@ -3766,11 +3813,16 @@ static void free_partial(struct kmem_cache *s, struct kmem_cache_node *n)
 			list_add(&page->slab_list, &discard);
 		} else {
 			list_slab_objects(s, page,
-			"Objects remaining in %s on __kmem_cache_shutdown()");
+			  "Objects remaining in %s on __kmem_cache_shutdown()",
+			  map);
 		}
 	}
 	spin_unlock_irq(&n->list_lock);
 
+#ifdef CONFIG_SLUB_DEBUG
+	bitmap_free(map);
+#endif
+
 	list_for_each_entry_safe(page, h, &discard, slab_list)
 		discard_slab(s, page);
 }
@@ -4393,6 +4445,7 @@ void *__kmalloc_track_caller(size_t size, gfp_t gfpflags, unsigned long caller)
 
 	return ret;
 }
+EXPORT_SYMBOL(__kmalloc_track_caller);
 
 #ifdef CONFIG_NUMA
 void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,
@@ -4423,6 +4476,7 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,
 
 	return ret;
 }
+EXPORT_SYMBOL(__kmalloc_node_track_caller);
 #endif
 
 #ifdef CONFIG_SYSFS
@@ -5639,7 +5693,8 @@ static void memcg_propagate_slab_attrs(struct kmem_cache *s)
 		 */
 		if (buffer)
 			buf = buffer;
-		else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf))
+		else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf) &&
+			 !IS_ENABLED(CONFIG_SLUB_STATS))
 			buf = mbuf;
 		else {
 			buffer = (char *) get_zeroed_page(GFP_KERNEL);
@@ -5673,19 +5728,6 @@ static struct kobj_type slab_ktype = {
 	.release = kmem_cache_release,
 };
 
-static int uevent_filter(struct kset *kset, struct kobject *kobj)
-{
-	struct kobj_type *ktype = get_ktype(kobj);
-
-	if (ktype == &slab_ktype)
-		return 1;
-	return 0;
-}
-
-static const struct kset_uevent_ops slab_uevent_ops = {
-	.filter = uevent_filter,
-};
-
 static struct kset *slab_kset;
 
 static inline struct kset *cache_kset(struct kmem_cache *s)
@@ -5753,7 +5795,6 @@ static void sysfs_slab_remove_workfn(struct work_struct *work)
 #ifdef CONFIG_MEMCG
 	kset_unregister(s->memcg_kset);
 #endif
-	kobject_uevent(&s->kobj, KOBJ_REMOVE);
 out:
 	kobject_put(&s->kobj);
 }
@@ -5811,7 +5852,6 @@ static int sysfs_slab_add(struct kmem_cache *s)
 	}
 #endif
 
-	kobject_uevent(&s->kobj, KOBJ_ADD);
 	if (!unmergeable) {
 		/* Setup first alias */
 		sysfs_slab_alias(s, s->name);
@@ -5892,7 +5932,7 @@ static int __init slab_sysfs_init(void)
 
 	mutex_lock(&slab_mutex);
 
-	slab_kset = kset_create_and_add("slab", &slab_uevent_ops, kernel_kobj);
+	slab_kset = kset_create_and_add("slab", NULL, kernel_kobj);
 	if (!slab_kset) {
 		mutex_unlock(&slab_mutex);
 		pr_err("Cannot register slab subsystem.\n");
diff --git a/mm/sparse.c b/mm/sparse.c
index 1aee5a481571..6284328cd9f2 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -288,7 +288,7 @@ void __init memory_present(int nid, unsigned long start, unsigned long end)
 
 /*
  * Mark all memblocks as present using memory_present(). This is a
- * convienence function that is useful for a number of arches
+ * convenience function that is useful for a number of arches
  * to mark all of the systems memory as present during initialization.
  */
 void __init memblocks_present(void)
diff --git a/mm/swap.c b/mm/swap.c
index bf9a79fed62d..a37bd7b202ac 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -599,7 +599,8 @@ void lru_add_drain_cpu(int cpu)
 		__pagevec_lru_add(pvec);
 
 	pvec = &per_cpu(lru_rotate_pvecs, cpu);
-	if (pagevec_count(pvec)) {
+	/* Disabling interrupts below acts as a compiler barrier. */
+	if (data_race(pagevec_count(pvec))) {
 		unsigned long flags;
 
 		/* No harm done if a racing interrupt already did this */
@@ -744,7 +745,7 @@ void lru_add_drain_all(void)
 		struct work_struct *work = &per_cpu(lru_add_drain_work, cpu);
 
 		if (pagevec_count(&per_cpu(lru_add_pvec, cpu)) ||
-		    pagevec_count(&per_cpu(lru_rotate_pvecs, cpu)) ||
+		    data_race(pagevec_count(&per_cpu(lru_rotate_pvecs, cpu))) ||
 		    pagevec_count(&per_cpu(lru_deactivate_file_pvecs, cpu)) ||
 		    pagevec_count(&per_cpu(lru_deactivate_pvecs, cpu)) ||
 		    pagevec_count(&per_cpu(lru_lazyfree_pvecs, cpu)) ||
diff --git a/mm/swap_state.c b/mm/swap_state.c
index ebed37bbf7a3..558e224138d1 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -58,8 +58,8 @@ static bool enable_vma_readahead __read_mostly = true;
 #define GET_SWAP_RA_VAL(vma)					\
 	(atomic_long_read(&(vma)->swap_readahead_info) ? : 4)
 
-#define INC_CACHE_INFO(x)	do { swap_cache_info.x++; } while (0)
-#define ADD_CACHE_INFO(x, nr)	do { swap_cache_info.x += (nr); } while (0)
+#define INC_CACHE_INFO(x)	data_race(swap_cache_info.x++)
+#define ADD_CACHE_INFO(x, nr)	data_race(swap_cache_info.x += (nr))
 
 static struct {
 	unsigned long add_total;
@@ -509,10 +509,11 @@ static unsigned long swapin_nr_pages(unsigned long offset)
 		return 1;
 
 	hits = atomic_xchg(&swapin_readahead_hits, 0);
-	pages = __swapin_nr_pages(prev_offset, offset, hits, max_pages,
+	pages = __swapin_nr_pages(READ_ONCE(prev_offset), offset, hits,
+				  max_pages,
 				  atomic_read(&last_readahead_pages));
 	if (!hits)
-		prev_offset = offset;
+		WRITE_ONCE(prev_offset, offset);
 	atomic_set(&last_readahead_pages, pages);
 
 	return pages;
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 5871a2aa86a5..afd8999071f0 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -601,7 +601,6 @@ static bool scan_swap_map_try_ssd_cluster(struct swap_info_struct *si,
 {
 	struct percpu_cluster *cluster;
 	struct swap_cluster_info *ci;
-	bool found_free;
 	unsigned long tmp, max;
 
 new_cluster:
@@ -623,8 +622,6 @@ static bool scan_swap_map_try_ssd_cluster(struct swap_info_struct *si,
 			return false;
 	}
 
-	found_free = false;
-
 	/*
 	 * Other CPUs can use our cluster if they can't find a free cluster,
 	 * check if there is still free entry in the cluster
@@ -632,27 +629,23 @@ static bool scan_swap_map_try_ssd_cluster(struct swap_info_struct *si,
 	tmp = cluster->next;
 	max = min_t(unsigned long, si->max,
 		    (cluster_next(&cluster->index) + 1) * SWAPFILE_CLUSTER);
-	if (tmp >= max) {
-		cluster_set_null(&cluster->index);
-		goto new_cluster;
-	}
-	ci = lock_cluster(si, tmp);
-	while (tmp < max) {
-		if (!si->swap_map[tmp]) {
-			found_free = true;
-			break;
+	if (tmp < max) {
+		ci = lock_cluster(si, tmp);
+		while (tmp < max) {
+			if (!si->swap_map[tmp])
+				break;
+			tmp++;
 		}
-		tmp++;
+		unlock_cluster(ci);
 	}
-	unlock_cluster(ci);
-	if (!found_free) {
+	if (tmp >= max) {
 		cluster_set_null(&cluster->index);
 		goto new_cluster;
 	}
 	cluster->next = tmp + 1;
 	*offset = tmp;
 	*scan_base = tmp;
-	return found_free;
+	return true;
 }
 
 static void __del_from_avail_list(struct swap_info_struct *p)
@@ -678,7 +671,7 @@ static void swap_range_alloc(struct swap_info_struct *si, unsigned long offset,
 	if (offset == si->lowest_bit)
 		si->lowest_bit += nr_entries;
 	if (end == si->highest_bit)
-		si->highest_bit -= nr_entries;
+		WRITE_ONCE(si->highest_bit, si->highest_bit - nr_entries);
 	si->inuse_pages += nr_entries;
 	if (si->inuse_pages == si->pages) {
 		si->lowest_bit = si->max;
@@ -710,7 +703,7 @@ static void swap_range_free(struct swap_info_struct *si, unsigned long offset,
 	if (end > si->highest_bit) {
 		bool was_full = !si->highest_bit;
 
-		si->highest_bit = end;
+		WRITE_ONCE(si->highest_bit, end);
 		if (was_full && (si->flags & SWP_WRITEOK))
 			add_to_avail_list(si);
 	}
@@ -739,9 +732,7 @@ static int scan_swap_map_slots(struct swap_info_struct *si,
 	unsigned long last_in_cluster = 0;
 	int latency_ration = LATENCY_LIMIT;
 	int n_ret = 0;
-
-	if (nr > SWAP_BATCH)
-		nr = SWAP_BATCH;
+	bool scanned_many = false;
 
 	/*
 	 * We try to cluster swap pages by allocating them sequentially
@@ -759,13 +750,9 @@ static int scan_swap_map_slots(struct swap_info_struct *si,
 
 	/* SSD algorithm */
 	if (si->cluster_info) {
-		if (scan_swap_map_try_ssd_cluster(si, &offset, &scan_base))
-			goto checks;
-		else
+		if (!scan_swap_map_try_ssd_cluster(si, &offset, &scan_base))
 			goto scan;
-	}
-
-	if (unlikely(!si->cluster_nr--)) {
+	} else if (unlikely(!si->cluster_nr--)) {
 		if (si->pages - si->inuse_pages < SWAPFILE_CLUSTER) {
 			si->cluster_nr = SWAPFILE_CLUSTER - 1;
 			goto checks;
@@ -843,7 +830,7 @@ static int scan_swap_map_slots(struct swap_info_struct *si,
 		else
 			goto done;
 	}
-	si->swap_map[offset] = usage;
+	WRITE_ONCE(si->swap_map[offset], usage);
 	inc_cluster_info_page(si, si->cluster_info, offset);
 	unlock_cluster(ci);
 
@@ -871,51 +858,68 @@ static int scan_swap_map_slots(struct swap_info_struct *si,
 	if (si->cluster_info) {
 		if (scan_swap_map_try_ssd_cluster(si, &offset, &scan_base))
 			goto checks;
-		else
-			goto done;
-	}
-	/* non-ssd case */
-	++offset;
-
-	/* non-ssd case, still more slots in cluster? */
-	if (si->cluster_nr && !si->swap_map[offset]) {
+	} else if (si->cluster_nr && !si->swap_map[++offset]) {
+		/* non-ssd case, still more slots in cluster? */
 		--si->cluster_nr;
 		goto checks;
 	}
 
+	/*
+	 * Even if there's no free clusters available (fragmented),
+	 * try to scan a little more quickly with lock held unless we
+	 * have scanned too many slots already.
+	 */
+	if (!scanned_many) {
+		unsigned long scan_limit;
+
+		if (offset < scan_base)
+			scan_limit = scan_base;
+		else
+			scan_limit = si->highest_bit;
+		for (; offset <= scan_limit && --latency_ration > 0;
+		     offset++) {
+			if (!si->swap_map[offset])
+				goto checks;
+		}
+	}
+
 done:
 	si->flags -= SWP_SCANNING;
 	return n_ret;
 
 scan:
 	spin_unlock(&si->lock);
-	while (++offset <= si->highest_bit) {
-		if (!si->swap_map[offset]) {
+	while (++offset <= READ_ONCE(si->highest_bit)) {
+		if (data_race(!si->swap_map[offset])) {
 			spin_lock(&si->lock);
 			goto checks;
 		}
-		if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+		if (vm_swap_full() &&
+		    READ_ONCE(si->swap_map[offset]) == SWAP_HAS_CACHE) {
 			spin_lock(&si->lock);
 			goto checks;
 		}
 		if (unlikely(--latency_ration < 0)) {
 			cond_resched();
 			latency_ration = LATENCY_LIMIT;
+			scanned_many = true;
 		}
 	}
 	offset = si->lowest_bit;
 	while (offset < scan_base) {
-		if (!si->swap_map[offset]) {
+		if (data_race(!si->swap_map[offset])) {
 			spin_lock(&si->lock);
 			goto checks;
 		}
-		if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+		if (vm_swap_full() &&
+		    READ_ONCE(si->swap_map[offset]) == SWAP_HAS_CACHE) {
 			spin_lock(&si->lock);
 			goto checks;
 		}
 		if (unlikely(--latency_ration < 0)) {
 			cond_resched();
 			latency_ration = LATENCY_LIMIT;
+			scanned_many = true;
 		}
 		offset++;
 	}
@@ -1004,11 +1008,7 @@ int get_swap_pages(int n_goal, swp_entry_t swp_entries[], int entry_size)
 	if (avail_pgs <= 0)
 		goto noswap;
 
-	if (n_goal > SWAP_BATCH)
-		n_goal = SWAP_BATCH;
-
-	if (n_goal > avail_pgs)
-		n_goal = avail_pgs;
+	n_goal = min3((long)n_goal, (long)SWAP_BATCH, avail_pgs);
 
 	atomic_long_sub(n_goal * size, &nr_swap_pages);
 
@@ -1111,7 +1111,7 @@ static struct swap_info_struct *__swap_info_get(swp_entry_t entry)
 	p = swp_swap_info(entry);
 	if (!p)
 		goto bad_nofile;
-	if (!(p->flags & SWP_USED))
+	if (data_race(!(p->flags & SWP_USED)))
 		goto bad_device;
 	offset = swp_offset(entry);
 	if (offset >= p->max)
@@ -1137,7 +1137,7 @@ static struct swap_info_struct *_swap_info_get(swp_entry_t entry)
 	p = __swap_info_get(entry);
 	if (!p)
 		goto out;
-	if (!p->swap_map[swp_offset(entry)])
+	if (data_race(!p->swap_map[swp_offset(entry)]))
 		goto bad_free;
 	return p;
 
@@ -1206,7 +1206,10 @@ static unsigned char __swap_entry_free_locked(struct swap_info_struct *p,
 	}
 
 	usage = count | has_cache;
-	p->swap_map[offset] = usage ? : SWAP_HAS_CACHE;
+	if (usage)
+		WRITE_ONCE(p->swap_map[offset], usage);
+	else
+		WRITE_ONCE(p->swap_map[offset], SWAP_HAS_CACHE);
 
 	return usage;
 }
@@ -1258,7 +1261,7 @@ struct swap_info_struct *get_swap_device(swp_entry_t entry)
 		goto bad_nofile;
 
 	rcu_read_lock();
-	if (!(si->flags & SWP_VALID))
+	if (data_race(!(si->flags & SWP_VALID)))
 		goto unlock_out;
 	offset = swp_offset(entry);
 	if (offset >= si->max)
@@ -1937,10 +1940,14 @@ static int unuse_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
 
 		pte_unmap(pte);
 		swap_map = &si->swap_map[offset];
-		vmf.vma = vma;
-		vmf.address = addr;
-		vmf.pmd = pmd;
-		page = swapin_readahead(entry, GFP_HIGHUSER_MOVABLE, &vmf);
+		page = lookup_swap_cache(entry, vma, addr);
+		if (!page) {
+			vmf.vma = vma;
+			vmf.address = addr;
+			vmf.pmd = pmd;
+			page = swapin_readahead(entry, GFP_HIGHUSER_MOVABLE,
+						&vmf);
+		}
 		if (!page) {
 			if (*swap_map == 0 || *swap_map == SWAP_MAP_BAD)
 				goto try_next;
@@ -3436,7 +3443,7 @@ static int __swap_duplicate(swp_entry_t entry, unsigned char usage)
 	} else
 		err = -ENOENT;			/* unused swap entry */
 
-	p->swap_map[offset] = count | has_cache;
+	WRITE_ONCE(p->swap_map[offset], count | has_cache);
 
 unlock_out:
 	unlock_cluster_or_swap_info(p, ci);
@@ -3654,7 +3661,7 @@ static bool swap_count_continued(struct swap_info_struct *si,
 
 	spin_lock(&si->cont_lock);
 	offset &= ~PAGE_MASK;
-	page = list_entry(head->lru.next, struct page, lru);
+	page = list_next_entry(head, lru);
 	map = kmap_atomic(page) + offset;
 
 	if (count == SWAP_MAP_MAX)	/* initial increment from swap_map */
@@ -3666,13 +3673,13 @@ static bool swap_count_continued(struct swap_info_struct *si,
 		 */
 		while (*map == (SWAP_CONT_MAX | COUNT_CONTINUED)) {
 			kunmap_atomic(map);
-			page = list_entry(page->lru.next, struct page, lru);
+			page = list_next_entry(page, lru);
 			BUG_ON(page == head);
 			map = kmap_atomic(page) + offset;
 		}
 		if (*map == SWAP_CONT_MAX) {
 			kunmap_atomic(map);
-			page = list_entry(page->lru.next, struct page, lru);
+			page = list_next_entry(page, lru);
 			if (page == head) {
 				ret = false;	/* add count continuation */
 				goto out;
@@ -3682,12 +3689,10 @@ init_map:		*map = 0;		/* we didn't zero the page */
 		}
 		*map += 1;
 		kunmap_atomic(map);
-		page = list_entry(page->lru.prev, struct page, lru);
-		while (page != head) {
+		while ((page = list_prev_entry(page, lru)) != head) {
 			map = kmap_atomic(page) + offset;
 			*map = COUNT_CONTINUED;
 			kunmap_atomic(map);
-			page = list_entry(page->lru.prev, struct page, lru);
 		}
 		ret = true;			/* incremented */
 
@@ -3698,7 +3703,7 @@ init_map:		*map = 0;		/* we didn't zero the page */
 		BUG_ON(count != COUNT_CONTINUED);
 		while (*map == COUNT_CONTINUED) {
 			kunmap_atomic(map);
-			page = list_entry(page->lru.next, struct page, lru);
+			page = list_next_entry(page, lru);
 			BUG_ON(page == head);
 			map = kmap_atomic(page) + offset;
 		}
@@ -3707,13 +3712,11 @@ init_map:		*map = 0;		/* we didn't zero the page */
 		if (*map == 0)
 			count = 0;
 		kunmap_atomic(map);
-		page = list_entry(page->lru.prev, struct page, lru);
-		while (page != head) {
+		while ((page = list_prev_entry(page, lru)) != head) {
 			map = kmap_atomic(page) + offset;
 			*map = SWAP_CONT_MAX | count;
 			count = COUNT_CONTINUED;
 			kunmap_atomic(map);
-			page = list_entry(page->lru.prev, struct page, lru);
 		}
 		ret = count == COUNT_CONTINUED;
 	}
diff --git a/mm/util.c b/mm/util.c
index 988d11e6c17c..e789461478de 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -580,7 +580,7 @@ void *kvmalloc_node(size_t size, gfp_t flags, int node)
 	if (ret || size <= PAGE_SIZE)
 		return ret;
 
-	return __vmalloc_node_flags_caller(size, node, flags,
+	return __vmalloc_node(size, 1, flags, node,
 			__builtin_return_address(0));
 }
 EXPORT_SYMBOL(kvmalloc_node);
@@ -717,9 +717,8 @@ int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
 unsigned long sysctl_user_reserve_kbytes __read_mostly = 1UL << 17; /* 128MB */
 unsigned long sysctl_admin_reserve_kbytes __read_mostly = 1UL << 13; /* 8MB */
 
-int overcommit_ratio_handler(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp,
-			     loff_t *ppos)
+int overcommit_ratio_handler(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	int ret;
 
@@ -729,9 +728,8 @@ int overcommit_ratio_handler(struct ctl_table *table, int write,
 	return ret;
 }
 
-int overcommit_kbytes_handler(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp,
-			     loff_t *ppos)
+int overcommit_kbytes_handler(struct ctl_table *table, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	int ret;
 
@@ -798,8 +796,12 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
 {
 	long allowed;
 
-	VM_WARN_ONCE(percpu_counter_read(&vm_committed_as) <
-			-(s64)vm_committed_as_batch * num_online_cpus(),
+	/*
+	 * A transient decrease in the value is unlikely, so no need
+	 * READ_ONCE() for vm_committed_as.count.
+	 */
+	VM_WARN_ONCE(data_race(percpu_counter_read(&vm_committed_as) <
+			-(s64)vm_committed_as_batch * num_online_cpus()),
 			"memory commitment underflow");
 
 	vm_acct_memory(pages);
diff --git a/mm/vmacache.c b/mm/vmacache.c
index cdc32a3b02fa..ceedbab82106 100644
--- a/mm/vmacache.c
+++ b/mm/vmacache.c
@@ -25,8 +25,8 @@
  * task's vmacache pertains to a different mm (ie, its own).  There is
  * nothing we can do here.
  *
- * Also handle the case where a kernel thread has adopted this mm via use_mm().
- * That kernel thread's vmacache is not applicable to this mm.
+ * Also handle the case where a kernel thread has adopted this mm via
+ * kthread_use_mm(). That kernel thread's vmacache is not applicable to this mm.
  */
 static inline bool vmacache_valid_mm(struct mm_struct *mm)
 {
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 9a8227afa073..410bfe26ee73 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -128,10 +128,24 @@ static void vunmap_p4d_range(pgd_t *pgd, unsigned long addr, unsigned long end)
 	} while (p4d++, addr = next, addr != end);
 }
 
-static void vunmap_page_range(unsigned long addr, unsigned long end)
+/**
+ * unmap_kernel_range_noflush - unmap kernel VM area
+ * @addr: start of the VM area to unmap
+ * @size: size of the VM area to unmap
+ *
+ * Unmap PFN_UP(@size) pages at @addr.  The VM area @addr and @size specify
+ * should have been allocated using get_vm_area() and its friends.
+ *
+ * NOTE:
+ * This function does NOT do any cache flushing.  The caller is responsible
+ * for calling flush_cache_vunmap() on to-be-mapped areas before calling this
+ * function and flush_tlb_kernel_range() after.
+ */
+void unmap_kernel_range_noflush(unsigned long addr, unsigned long size)
 {
-	pgd_t *pgd;
+	unsigned long end = addr + size;
 	unsigned long next;
+	pgd_t *pgd;
 
 	BUG_ON(addr >= end);
 	pgd = pgd_offset_k(addr);
@@ -220,18 +234,30 @@ static int vmap_p4d_range(pgd_t *pgd, unsigned long addr,
 	return 0;
 }
 
-/*
- * Set up page tables in kva (addr, end). The ptes shall have prot "prot", and
- * will have pfns corresponding to the "pages" array.
+/**
+ * map_kernel_range_noflush - map kernel VM area with the specified pages
+ * @addr: start of the VM area to map
+ * @size: size of the VM area to map
+ * @prot: page protection flags to use
+ * @pages: pages to map
+ *
+ * Map PFN_UP(@size) pages at @addr.  The VM area @addr and @size specify should
+ * have been allocated using get_vm_area() and its friends.
+ *
+ * NOTE:
+ * This function does NOT do any cache flushing.  The caller is responsible for
+ * calling flush_cache_vmap() on to-be-mapped areas before calling this
+ * function.
  *
- * Ie. pte at addr+N*PAGE_SIZE shall point to pfn corresponding to pages[N]
+ * RETURNS:
+ * 0 on success, -errno on failure.
  */
-static int vmap_page_range_noflush(unsigned long start, unsigned long end,
-				   pgprot_t prot, struct page **pages)
+int map_kernel_range_noflush(unsigned long addr, unsigned long size,
+			     pgprot_t prot, struct page **pages)
 {
-	pgd_t *pgd;
+	unsigned long end = addr + size;
 	unsigned long next;
-	unsigned long addr = start;
+	pgd_t *pgd;
 	int err = 0;
 	int nr = 0;
 
@@ -244,16 +270,16 @@ static int vmap_page_range_noflush(unsigned long start, unsigned long end,
 			return err;
 	} while (pgd++, addr = next, addr != end);
 
-	return nr;
+	return 0;
 }
 
-static int vmap_page_range(unsigned long start, unsigned long end,
-			   pgprot_t prot, struct page **pages)
+int map_kernel_range(unsigned long start, unsigned long size, pgprot_t prot,
+		struct page **pages)
 {
 	int ret;
 
-	ret = vmap_page_range_noflush(start, end, prot, pages);
-	flush_cache_vmap(start, end);
+	ret = map_kernel_range_noflush(start, size, prot, pages);
+	flush_cache_vmap(start, start + size);
 	return ret;
 }
 
@@ -1222,14 +1248,6 @@ int unregister_vmap_purge_notifier(struct notifier_block *nb)
 }
 EXPORT_SYMBOL_GPL(unregister_vmap_purge_notifier);
 
-/*
- * Clear the pagetable entries of a given vmap_area
- */
-static void unmap_vmap_area(struct vmap_area *va)
-{
-	vunmap_page_range(va->va_start, va->va_end);
-}
-
 /*
  * lazy_max_pages is the maximum amount of virtual address space we gather up
  * before attempting to purge with a TLB flush.
@@ -1391,7 +1409,7 @@ static void free_vmap_area_noflush(struct vmap_area *va)
 static void free_unmap_vmap_area(struct vmap_area *va)
 {
 	flush_cache_vunmap(va->va_start, va->va_end);
-	unmap_vmap_area(va);
+	unmap_kernel_range_noflush(va->va_start, va->va_end - va->va_start);
 	if (debug_pagealloc_enabled_static())
 		flush_tlb_kernel_range(va->va_start, va->va_end);
 
@@ -1665,7 +1683,7 @@ static void *vb_alloc(unsigned long size, gfp_t gfp_mask)
 	return vaddr;
 }
 
-static void vb_free(const void *addr, unsigned long size)
+static void vb_free(unsigned long addr, unsigned long size)
 {
 	unsigned long offset;
 	unsigned long vb_idx;
@@ -1675,24 +1693,22 @@ static void vb_free(const void *addr, unsigned long size)
 	BUG_ON(offset_in_page(size));
 	BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC);
 
-	flush_cache_vunmap((unsigned long)addr, (unsigned long)addr + size);
+	flush_cache_vunmap(addr, addr + size);
 
 	order = get_order(size);
 
-	offset = (unsigned long)addr & (VMAP_BLOCK_SIZE - 1);
-	offset >>= PAGE_SHIFT;
+	offset = (addr & (VMAP_BLOCK_SIZE - 1)) >> PAGE_SHIFT;
 
-	vb_idx = addr_to_vb_idx((unsigned long)addr);
+	vb_idx = addr_to_vb_idx(addr);
 	rcu_read_lock();
 	vb = radix_tree_lookup(&vmap_block_tree, vb_idx);
 	rcu_read_unlock();
 	BUG_ON(!vb);
 
-	vunmap_page_range((unsigned long)addr, (unsigned long)addr + size);
+	unmap_kernel_range_noflush(addr, size);
 
 	if (debug_pagealloc_enabled_static())
-		flush_tlb_kernel_range((unsigned long)addr,
-					(unsigned long)addr + size);
+		flush_tlb_kernel_range(addr, addr + size);
 
 	spin_lock(&vb->lock);
 
@@ -1792,7 +1808,7 @@ void vm_unmap_ram(const void *mem, unsigned int count)
 
 	if (likely(count <= VMAP_MAX_ALLOC)) {
 		debug_check_no_locks_freed(mem, size);
-		vb_free(mem, size);
+		vb_free(addr, size);
 		return;
 	}
 
@@ -1819,7 +1835,7 @@ EXPORT_SYMBOL(vm_unmap_ram);
  *
  * Returns: a pointer to the address that has been mapped, or %NULL on failure
  */
-void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t prot)
+void *vm_map_ram(struct page **pages, unsigned int count, int node)
 {
 	unsigned long size = (unsigned long)count << PAGE_SHIFT;
 	unsigned long addr;
@@ -1843,7 +1859,7 @@ void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t pro
 
 	kasan_unpoison_vmalloc(mem, size);
 
-	if (vmap_page_range(addr, addr + size, prot, pages) < 0) {
+	if (map_kernel_range(addr, size, PAGE_KERNEL, pages) < 0) {
 		vm_unmap_ram(mem, count);
 		return NULL;
 	}
@@ -1987,51 +2003,6 @@ void __init vmalloc_init(void)
 	vmap_initialized = true;
 }
 
-/**
- * map_kernel_range_noflush - map kernel VM area with the specified pages
- * @addr: start of the VM area to map
- * @size: size of the VM area to map
- * @prot: page protection flags to use
- * @pages: pages to map
- *
- * Map PFN_UP(@size) pages at @addr.  The VM area @addr and @size
- * specify should have been allocated using get_vm_area() and its
- * friends.
- *
- * NOTE:
- * This function does NOT do any cache flushing.  The caller is
- * responsible for calling flush_cache_vmap() on to-be-mapped areas
- * before calling this function.
- *
- * RETURNS:
- * The number of pages mapped on success, -errno on failure.
- */
-int map_kernel_range_noflush(unsigned long addr, unsigned long size,
-			     pgprot_t prot, struct page **pages)
-{
-	return vmap_page_range_noflush(addr, addr + size, prot, pages);
-}
-
-/**
- * unmap_kernel_range_noflush - unmap kernel VM area
- * @addr: start of the VM area to unmap
- * @size: size of the VM area to unmap
- *
- * Unmap PFN_UP(@size) pages at @addr.  The VM area @addr and @size
- * specify should have been allocated using get_vm_area() and its
- * friends.
- *
- * NOTE:
- * This function does NOT do any cache flushing.  The caller is
- * responsible for calling flush_cache_vunmap() on to-be-mapped areas
- * before calling this function and flush_tlb_kernel_range() after.
- */
-void unmap_kernel_range_noflush(unsigned long addr, unsigned long size)
-{
-	vunmap_page_range(addr, addr + size);
-}
-EXPORT_SYMBOL_GPL(unmap_kernel_range_noflush);
-
 /**
  * unmap_kernel_range - unmap kernel VM area and flush cache and TLB
  * @addr: start of the VM area to unmap
@@ -2045,22 +2016,9 @@ void unmap_kernel_range(unsigned long addr, unsigned long size)
 	unsigned long end = addr + size;
 
 	flush_cache_vunmap(addr, end);
-	vunmap_page_range(addr, end);
+	unmap_kernel_range_noflush(addr, size);
 	flush_tlb_kernel_range(addr, end);
 }
-EXPORT_SYMBOL_GPL(unmap_kernel_range);
-
-int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page **pages)
-{
-	unsigned long addr = (unsigned long)area->addr;
-	unsigned long end = addr + get_vm_area_size(area);
-	int err;
-
-	err = vmap_page_range(addr, end, prot, pages);
-
-	return err > 0 ? 0 : err;
-}
-EXPORT_SYMBOL_GPL(map_vm_area);
 
 static inline void setup_vmalloc_vm_locked(struct vm_struct *vm,
 	struct vmap_area *va, unsigned long flags, const void *caller)
@@ -2128,14 +2086,6 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
 	return area;
 }
 
-struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
-				unsigned long start, unsigned long end)
-{
-	return __get_vm_area_node(size, 1, flags, start, end, NUMA_NO_NODE,
-				  GFP_KERNEL, __builtin_return_address(0));
-}
-EXPORT_SYMBOL_GPL(__get_vm_area);
-
 struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags,
 				       unsigned long start, unsigned long end,
 				       const void *caller)
@@ -2441,7 +2391,8 @@ void *vmap(struct page **pages, unsigned int count,
 	if (!area)
 		return NULL;
 
-	if (map_vm_area(area, prot, pages)) {
+	if (map_kernel_range((unsigned long)area->addr, size, pgprot_nx(prot),
+			pages) < 0) {
 		vunmap(area->addr);
 		return NULL;
 	}
@@ -2450,9 +2401,6 @@ void *vmap(struct page **pages, unsigned int count,
 }
 EXPORT_SYMBOL(vmap);
 
-static void *__vmalloc_node(unsigned long size, unsigned long align,
-			    gfp_t gfp_mask, pgprot_t prot,
-			    int node, const void *caller);
 static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
 				 pgprot_t prot, int node)
 {
@@ -2470,7 +2418,7 @@ static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
 	/* Please note that the recursion is strictly bounded. */
 	if (array_size > PAGE_SIZE) {
 		pages = __vmalloc_node(array_size, 1, nested_gfp|highmem_mask,
-				PAGE_KERNEL, node, area->caller);
+				node, area->caller);
 	} else {
 		pages = kmalloc_node(array_size, nested_gfp, node);
 	}
@@ -2504,8 +2452,10 @@ static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
 	}
 	atomic_long_add(area->nr_pages, &nr_vmalloc_pages);
 
-	if (map_vm_area(area, prot, pages))
+	if (map_kernel_range((unsigned long)area->addr, get_vm_area_size(area),
+			prot, pages) < 0)
 		goto fail;
+
 	return area->addr;
 
 fail:
@@ -2573,27 +2523,16 @@ void *__vmalloc_node_range(unsigned long size, unsigned long align,
 	return NULL;
 }
 
-/*
- * This is only for performance analysis of vmalloc and stress purpose.
- * It is required by vmalloc test module, therefore do not use it other
- * than that.
- */
-#ifdef CONFIG_TEST_VMALLOC_MODULE
-EXPORT_SYMBOL_GPL(__vmalloc_node_range);
-#endif
-
 /**
  * __vmalloc_node - allocate virtually contiguous memory
  * @size:	    allocation size
  * @align:	    desired alignment
  * @gfp_mask:	    flags for the page level allocator
- * @prot:	    protection mask for the allocated pages
  * @node:	    node to use for allocation or NUMA_NO_NODE
  * @caller:	    caller's return address
  *
- * Allocate enough pages to cover @size from the page level
- * allocator with @gfp_mask flags.  Map them into contiguous
- * kernel virtual space, using a pagetable protection of @prot.
+ * Allocate enough pages to cover @size from the page level allocator with
+ * @gfp_mask flags.  Map them into contiguous kernel virtual space.
  *
  * Reclaim modifiers in @gfp_mask - __GFP_NORETRY, __GFP_RETRY_MAYFAIL
  * and __GFP_NOFAIL are not supported
@@ -2603,35 +2542,28 @@ EXPORT_SYMBOL_GPL(__vmalloc_node_range);
  *
  * Return: pointer to the allocated memory or %NULL on error
  */
-static void *__vmalloc_node(unsigned long size, unsigned long align,
-			    gfp_t gfp_mask, pgprot_t prot,
-			    int node, const void *caller)
+void *__vmalloc_node(unsigned long size, unsigned long align,
+			    gfp_t gfp_mask, int node, const void *caller)
 {
 	return __vmalloc_node_range(size, align, VMALLOC_START, VMALLOC_END,
-				gfp_mask, prot, 0, node, caller);
+				gfp_mask, PAGE_KERNEL, 0, node, caller);
 }
+/*
+ * This is only for performance analysis of vmalloc and stress purpose.
+ * It is required by vmalloc test module, therefore do not use it other
+ * than that.
+ */
+#ifdef CONFIG_TEST_VMALLOC_MODULE
+EXPORT_SYMBOL_GPL(__vmalloc_node);
+#endif
 
-void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
+void *__vmalloc(unsigned long size, gfp_t gfp_mask)
 {
-	return __vmalloc_node(size, 1, gfp_mask, prot, NUMA_NO_NODE,
+	return __vmalloc_node(size, 1, gfp_mask, NUMA_NO_NODE,
 				__builtin_return_address(0));
 }
 EXPORT_SYMBOL(__vmalloc);
 
-static inline void *__vmalloc_node_flags(unsigned long size,
-					int node, gfp_t flags)
-{
-	return __vmalloc_node(size, 1, flags, PAGE_KERNEL,
-					node, __builtin_return_address(0));
-}
-
-
-void *__vmalloc_node_flags_caller(unsigned long size, int node, gfp_t flags,
-				  void *caller)
-{
-	return __vmalloc_node(size, 1, flags, PAGE_KERNEL, node, caller);
-}
-
 /**
  * vmalloc - allocate virtually contiguous memory
  * @size:    allocation size
@@ -2646,8 +2578,8 @@ void *__vmalloc_node_flags_caller(unsigned long size, int node, gfp_t flags,
  */
 void *vmalloc(unsigned long size)
 {
-	return __vmalloc_node_flags(size, NUMA_NO_NODE,
-				    GFP_KERNEL);
+	return __vmalloc_node(size, 1, GFP_KERNEL, NUMA_NO_NODE,
+				__builtin_return_address(0));
 }
 EXPORT_SYMBOL(vmalloc);
 
@@ -2666,8 +2598,8 @@ EXPORT_SYMBOL(vmalloc);
  */
 void *vzalloc(unsigned long size)
 {
-	return __vmalloc_node_flags(size, NUMA_NO_NODE,
-				GFP_KERNEL | __GFP_ZERO);
+	return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_ZERO, NUMA_NO_NODE,
+				__builtin_return_address(0));
 }
 EXPORT_SYMBOL(vzalloc);
 
@@ -2704,8 +2636,8 @@ EXPORT_SYMBOL(vmalloc_user);
  */
 void *vmalloc_node(unsigned long size, int node)
 {
-	return __vmalloc_node(size, 1, GFP_KERNEL, PAGE_KERNEL,
-					node, __builtin_return_address(0));
+	return __vmalloc_node(size, 1, GFP_KERNEL, node,
+			__builtin_return_address(0));
 }
 EXPORT_SYMBOL(vmalloc_node);
 
@@ -2718,38 +2650,15 @@ EXPORT_SYMBOL(vmalloc_node);
  * allocator and map them into contiguous kernel virtual space.
  * The memory allocated is set to zero.
  *
- * For tight control over page level allocator and protection flags
- * use __vmalloc_node() instead.
- *
  * Return: pointer to the allocated memory or %NULL on error
  */
 void *vzalloc_node(unsigned long size, int node)
 {
-	return __vmalloc_node_flags(size, node,
-			 GFP_KERNEL | __GFP_ZERO);
+	return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_ZERO, node,
+				__builtin_return_address(0));
 }
 EXPORT_SYMBOL(vzalloc_node);
 
-/**
- * vmalloc_user_node_flags - allocate memory for userspace on a specific node
- * @size: allocation size
- * @node: numa node
- * @flags: flags for the page level allocator
- *
- * The resulting memory area is zeroed so it can be mapped to userspace
- * without leaking data.
- *
- * Return: pointer to the allocated memory or %NULL on error
- */
-void *vmalloc_user_node_flags(unsigned long size, int node, gfp_t flags)
-{
-	return __vmalloc_node_range(size, SHMLBA,  VMALLOC_START, VMALLOC_END,
-				    flags | __GFP_ZERO, PAGE_KERNEL,
-				    VM_USERMAP, node,
-				    __builtin_return_address(0));
-}
-EXPORT_SYMBOL(vmalloc_user_node_flags);
-
 /**
  * vmalloc_exec - allocate virtually contiguous, executable memory
  * @size:	  allocation size
@@ -2793,8 +2702,8 @@ void *vmalloc_exec(unsigned long size)
  */
 void *vmalloc_32(unsigned long size)
 {
-	return __vmalloc_node(size, 1, GFP_VMALLOC32, PAGE_KERNEL,
-			      NUMA_NO_NODE, __builtin_return_address(0));
+	return __vmalloc_node(size, 1, GFP_VMALLOC32, NUMA_NO_NODE,
+			__builtin_return_address(0));
 }
 EXPORT_SYMBOL(vmalloc_32);
 
diff --git a/mm/vmscan.c b/mm/vmscan.c
index b06868fc4926..3d81a919f7eb 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -676,7 +676,7 @@ static unsigned long shrink_slab(gfp_t gfp_mask, int nid,
 		freed += ret;
 		/*
 		 * Bail out if someone want to register a new shrinker to
-		 * prevent the regsitration from being stalled for long periods
+		 * prevent the registration from being stalled for long periods
 		 * by parallel ongoing shrinking.
 		 */
 		if (rwsem_is_contended(&shrinker_rwsem)) {
@@ -1066,17 +1066,17 @@ static void page_check_dirty_writeback(struct page *page,
 /*
  * shrink_page_list() returns the number of reclaimed pages
  */
-static unsigned long shrink_page_list(struct list_head *page_list,
-				      struct pglist_data *pgdat,
-				      struct scan_control *sc,
-				      enum ttu_flags ttu_flags,
-				      struct reclaim_stat *stat,
-				      bool ignore_references)
+static unsigned int shrink_page_list(struct list_head *page_list,
+				     struct pglist_data *pgdat,
+				     struct scan_control *sc,
+				     enum ttu_flags ttu_flags,
+				     struct reclaim_stat *stat,
+				     bool ignore_references)
 {
 	LIST_HEAD(ret_pages);
 	LIST_HEAD(free_pages);
-	unsigned nr_reclaimed = 0;
-	unsigned pgactivate = 0;
+	unsigned int nr_reclaimed = 0;
+	unsigned int pgactivate = 0;
 
 	memset(stat, 0, sizeof(*stat));
 	cond_resched();
@@ -1295,11 +1295,15 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 		 */
 		if (page_mapped(page)) {
 			enum ttu_flags flags = ttu_flags | TTU_BATCH_FLUSH;
+			bool was_swapbacked = PageSwapBacked(page);
 
 			if (unlikely(PageTransHuge(page)))
 				flags |= TTU_SPLIT_HUGE_PMD;
+
 			if (!try_to_unmap(page, flags)) {
 				stat->nr_unmap_fail += nr_pages;
+				if (!was_swapbacked && PageSwapBacked(page))
+					stat->nr_lazyfree_fail += nr_pages;
 				goto activate_locked;
 			}
 		}
@@ -1483,7 +1487,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 	return nr_reclaimed;
 }
 
-unsigned long reclaim_clean_pages_from_list(struct zone *zone,
+unsigned int reclaim_clean_pages_from_list(struct zone *zone,
 					    struct list_head *page_list)
 {
 	struct scan_control sc = {
@@ -1491,8 +1495,8 @@ unsigned long reclaim_clean_pages_from_list(struct zone *zone,
 		.priority = DEF_PRIORITY,
 		.may_unmap = 1,
 	};
-	struct reclaim_stat dummy_stat;
-	unsigned long ret;
+	struct reclaim_stat stat;
+	unsigned int nr_reclaimed;
 	struct page *page, *next;
 	LIST_HEAD(clean_pages);
 
@@ -1504,11 +1508,21 @@ unsigned long reclaim_clean_pages_from_list(struct zone *zone,
 		}
 	}
 
-	ret = shrink_page_list(&clean_pages, zone->zone_pgdat, &sc,
-			TTU_IGNORE_ACCESS, &dummy_stat, true);
+	nr_reclaimed = shrink_page_list(&clean_pages, zone->zone_pgdat, &sc,
+			TTU_IGNORE_ACCESS, &stat, true);
 	list_splice(&clean_pages, page_list);
-	mod_node_page_state(zone->zone_pgdat, NR_ISOLATED_FILE, -ret);
-	return ret;
+	mod_node_page_state(zone->zone_pgdat, NR_ISOLATED_FILE, -nr_reclaimed);
+	/*
+	 * Since lazyfree pages are isolated from file LRU from the beginning,
+	 * they will rotate back to anonymous LRU in the end if it failed to
+	 * discard so isolated count will be mismatched.
+	 * Compensate the isolated count for both LRU lists.
+	 */
+	mod_node_page_state(zone->zone_pgdat, NR_ISOLATED_ANON,
+			    stat.nr_lazyfree_fail);
+	mod_node_page_state(zone->zone_pgdat, NR_ISOLATED_FILE,
+			    -stat.nr_lazyfree_fail);
+	return nr_reclaimed;
 }
 
 /*
@@ -1591,7 +1605,7 @@ int __isolate_lru_page(struct page *page, isolate_mode_t mode)
 
 /*
  * Update LRU sizes after isolating pages. The LRU size updates must
- * be complete before mem_cgroup_update_lru_size due to a santity check.
+ * be complete before mem_cgroup_update_lru_size due to a sanity check.
  */
 static __always_inline void update_lru_sizes(struct lruvec *lruvec,
 			enum lru_list lru, unsigned long *nr_zone_taken)
@@ -1602,10 +1616,7 @@ static __always_inline void update_lru_sizes(struct lruvec *lruvec,
 		if (!nr_zone_taken[zid])
 			continue;
 
-		__update_lru_size(lruvec, lru, zid, -nr_zone_taken[zid]);
-#ifdef CONFIG_MEMCG
-		mem_cgroup_update_lru_size(lruvec, lru, zid, -nr_zone_taken[zid]);
-#endif
+		update_lru_size(lruvec, lru, zid, -nr_zone_taken[zid]);
 	}
 
 }
@@ -1900,7 +1911,7 @@ shrink_inactive_list(unsigned long nr_to_scan, struct lruvec *lruvec,
 {
 	LIST_HEAD(page_list);
 	unsigned long nr_scanned;
-	unsigned long nr_reclaimed = 0;
+	unsigned int nr_reclaimed = 0;
 	unsigned long nr_taken;
 	struct reclaim_stat stat;
 	int file = is_file_lru(lru);
@@ -2096,7 +2107,7 @@ static void shrink_active_list(unsigned long nr_to_scan,
 unsigned long reclaim_pages(struct list_head *page_list)
 {
 	int nid = NUMA_NO_NODE;
-	unsigned long nr_reclaimed = 0;
+	unsigned int nr_reclaimed = 0;
 	LIST_HEAD(node_page_list);
 	struct reclaim_stat dummy_stat;
 	struct page *page;
@@ -2389,7 +2400,7 @@ static void get_scan_count(struct lruvec *lruvec, struct scan_control *sc,
 
 			/*
 			 * Minimally target SWAP_CLUSTER_MAX pages to keep
-			 * reclaim moving forwards, avoiding decremeting
+			 * reclaim moving forwards, avoiding decrementing
 			 * sc->priority further than desirable.
 			 */
 			scan = max(scan, SWAP_CLUSTER_MAX);
@@ -2634,14 +2645,15 @@ static void shrink_node_memcgs(pg_data_t *pgdat, struct scan_control *sc)
 		unsigned long reclaimed;
 		unsigned long scanned;
 
-		switch (mem_cgroup_protected(target_memcg, memcg)) {
-		case MEMCG_PROT_MIN:
+		mem_cgroup_calculate_protection(target_memcg, memcg);
+
+		if (mem_cgroup_below_min(memcg)) {
 			/*
 			 * Hard protection.
 			 * If there is no reclaimable memory, OOM.
 			 */
 			continue;
-		case MEMCG_PROT_LOW:
+		} else if (mem_cgroup_below_low(memcg)) {
 			/*
 			 * Soft protection.
 			 * Respect the protection only as long as
@@ -2653,16 +2665,6 @@ static void shrink_node_memcgs(pg_data_t *pgdat, struct scan_control *sc)
 				continue;
 			}
 			memcg_memory_event(memcg, MEMCG_LOW);
-			break;
-		case MEMCG_PROT_NONE:
-			/*
-			 * All protection thresholds breached. We may
-			 * still choose to vary the scan pressure
-			 * applied based on by how much the cgroup in
-			 * question has exceeded its protection
-			 * thresholds (see get_scan_count).
-			 */
-			break;
 		}
 
 		reclaimed = sc->nr_reclaimed;
@@ -3132,8 +3134,8 @@ static bool allow_direct_reclaim(pg_data_t *pgdat)
 
 	/* kswapd must be awake if processes are being throttled */
 	if (!wmark_ok && waitqueue_active(&pgdat->kswapd_wait)) {
-		if (READ_ONCE(pgdat->kswapd_classzone_idx) > ZONE_NORMAL)
-			WRITE_ONCE(pgdat->kswapd_classzone_idx, ZONE_NORMAL);
+		if (READ_ONCE(pgdat->kswapd_highest_zoneidx) > ZONE_NORMAL)
+			WRITE_ONCE(pgdat->kswapd_highest_zoneidx, ZONE_NORMAL);
 
 		wake_up_interruptible(&pgdat->kswapd_wait);
 	}
@@ -3386,7 +3388,7 @@ static void age_active_anon(struct pglist_data *pgdat,
 	} while (memcg);
 }
 
-static bool pgdat_watermark_boosted(pg_data_t *pgdat, int classzone_idx)
+static bool pgdat_watermark_boosted(pg_data_t *pgdat, int highest_zoneidx)
 {
 	int i;
 	struct zone *zone;
@@ -3398,7 +3400,7 @@ static bool pgdat_watermark_boosted(pg_data_t *pgdat, int classzone_idx)
 	 * start prematurely when there is no boosting and a lower
 	 * zone is balanced.
 	 */
-	for (i = classzone_idx; i >= 0; i--) {
+	for (i = highest_zoneidx; i >= 0; i--) {
 		zone = pgdat->node_zones + i;
 		if (!managed_zone(zone))
 			continue;
@@ -3412,9 +3414,9 @@ static bool pgdat_watermark_boosted(pg_data_t *pgdat, int classzone_idx)
 
 /*
  * Returns true if there is an eligible zone balanced for the request order
- * and classzone_idx
+ * and highest_zoneidx
  */
-static bool pgdat_balanced(pg_data_t *pgdat, int order, int classzone_idx)
+static bool pgdat_balanced(pg_data_t *pgdat, int order, int highest_zoneidx)
 {
 	int i;
 	unsigned long mark = -1;
@@ -3424,19 +3426,19 @@ static bool pgdat_balanced(pg_data_t *pgdat, int order, int classzone_idx)
 	 * Check watermarks bottom-up as lower zones are more likely to
 	 * meet watermarks.
 	 */
-	for (i = 0; i <= classzone_idx; i++) {
+	for (i = 0; i <= highest_zoneidx; i++) {
 		zone = pgdat->node_zones + i;
 
 		if (!managed_zone(zone))
 			continue;
 
 		mark = high_wmark_pages(zone);
-		if (zone_watermark_ok_safe(zone, order, mark, classzone_idx))
+		if (zone_watermark_ok_safe(zone, order, mark, highest_zoneidx))
 			return true;
 	}
 
 	/*
-	 * If a node has no populated zone within classzone_idx, it does not
+	 * If a node has no populated zone within highest_zoneidx, it does not
 	 * need balancing by definition. This can happen if a zone-restricted
 	 * allocation tries to wake a remote kswapd.
 	 */
@@ -3462,7 +3464,8 @@ static void clear_pgdat_congested(pg_data_t *pgdat)
  *
  * Returns true if kswapd is ready to sleep
  */
-static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, int classzone_idx)
+static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order,
+				int highest_zoneidx)
 {
 	/*
 	 * The throttled processes are normally woken up in balance_pgdat() as
@@ -3484,7 +3487,7 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, int classzone_idx)
 	if (pgdat->kswapd_failures >= MAX_RECLAIM_RETRIES)
 		return true;
 
-	if (pgdat_balanced(pgdat, order, classzone_idx)) {
+	if (pgdat_balanced(pgdat, order, highest_zoneidx)) {
 		clear_pgdat_congested(pgdat);
 		return true;
 	}
@@ -3548,7 +3551,7 @@ static bool kswapd_shrink_node(pg_data_t *pgdat,
  * or lower is eligible for reclaim until at least one usable zone is
  * balanced.
  */
-static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
+static int balance_pgdat(pg_data_t *pgdat, int order, int highest_zoneidx)
 {
 	int i;
 	unsigned long nr_soft_reclaimed;
@@ -3576,7 +3579,7 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 	 * stall or direct reclaim until kswapd is finished.
 	 */
 	nr_boost_reclaim = 0;
-	for (i = 0; i <= classzone_idx; i++) {
+	for (i = 0; i <= highest_zoneidx; i++) {
 		zone = pgdat->node_zones + i;
 		if (!managed_zone(zone))
 			continue;
@@ -3594,7 +3597,7 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 		bool balanced;
 		bool ret;
 
-		sc.reclaim_idx = classzone_idx;
+		sc.reclaim_idx = highest_zoneidx;
 
 		/*
 		 * If the number of buffer_heads exceeds the maximum allowed
@@ -3624,7 +3627,7 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 		 * on the grounds that the normal reclaim should be enough to
 		 * re-evaluate if boosting is required when kswapd next wakes.
 		 */
-		balanced = pgdat_balanced(pgdat, sc.order, classzone_idx);
+		balanced = pgdat_balanced(pgdat, sc.order, highest_zoneidx);
 		if (!balanced && nr_boost_reclaim) {
 			nr_boost_reclaim = 0;
 			goto restart;
@@ -3724,7 +3727,7 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 	if (boosted) {
 		unsigned long flags;
 
-		for (i = 0; i <= classzone_idx; i++) {
+		for (i = 0; i <= highest_zoneidx; i++) {
 			if (!zone_boosts[i])
 				continue;
 
@@ -3739,7 +3742,7 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 		 * As there is now likely space, wakeup kcompact to defragment
 		 * pageblocks.
 		 */
-		wakeup_kcompactd(pgdat, pageblock_order, classzone_idx);
+		wakeup_kcompactd(pgdat, pageblock_order, highest_zoneidx);
 	}
 
 	snapshot_refaults(NULL, pgdat);
@@ -3757,22 +3760,22 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 }
 
 /*
- * The pgdat->kswapd_classzone_idx is used to pass the highest zone index to be
- * reclaimed by kswapd from the waker. If the value is MAX_NR_ZONES which is not
- * a valid index then either kswapd runs for first time or kswapd couldn't sleep
- * after previous reclaim attempt (node is still unbalanced). In that case
- * return the zone index of the previous kswapd reclaim cycle.
+ * The pgdat->kswapd_highest_zoneidx is used to pass the highest zone index to
+ * be reclaimed by kswapd from the waker. If the value is MAX_NR_ZONES which is
+ * not a valid index then either kswapd runs for first time or kswapd couldn't
+ * sleep after previous reclaim attempt (node is still unbalanced). In that
+ * case return the zone index of the previous kswapd reclaim cycle.
  */
-static enum zone_type kswapd_classzone_idx(pg_data_t *pgdat,
-					   enum zone_type prev_classzone_idx)
+static enum zone_type kswapd_highest_zoneidx(pg_data_t *pgdat,
+					   enum zone_type prev_highest_zoneidx)
 {
-	enum zone_type curr_idx = READ_ONCE(pgdat->kswapd_classzone_idx);
+	enum zone_type curr_idx = READ_ONCE(pgdat->kswapd_highest_zoneidx);
 
-	return curr_idx == MAX_NR_ZONES ? prev_classzone_idx : curr_idx;
+	return curr_idx == MAX_NR_ZONES ? prev_highest_zoneidx : curr_idx;
 }
 
 static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_order,
-				unsigned int classzone_idx)
+				unsigned int highest_zoneidx)
 {
 	long remaining = 0;
 	DEFINE_WAIT(wait);
@@ -3789,7 +3792,7 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_o
 	 * eligible zone balanced that it's also unlikely that compaction will
 	 * succeed.
 	 */
-	if (prepare_kswapd_sleep(pgdat, reclaim_order, classzone_idx)) {
+	if (prepare_kswapd_sleep(pgdat, reclaim_order, highest_zoneidx)) {
 		/*
 		 * Compaction records what page blocks it recently failed to
 		 * isolate pages from and skips them in the future scanning.
@@ -3802,18 +3805,19 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_o
 		 * We have freed the memory, now we should compact it to make
 		 * allocation of the requested order possible.
 		 */
-		wakeup_kcompactd(pgdat, alloc_order, classzone_idx);
+		wakeup_kcompactd(pgdat, alloc_order, highest_zoneidx);
 
 		remaining = schedule_timeout(HZ/10);
 
 		/*
-		 * If woken prematurely then reset kswapd_classzone_idx and
+		 * If woken prematurely then reset kswapd_highest_zoneidx and
 		 * order. The values will either be from a wakeup request or
 		 * the previous request that slept prematurely.
 		 */
 		if (remaining) {
-			WRITE_ONCE(pgdat->kswapd_classzone_idx,
-				   kswapd_classzone_idx(pgdat, classzone_idx));
+			WRITE_ONCE(pgdat->kswapd_highest_zoneidx,
+					kswapd_highest_zoneidx(pgdat,
+							highest_zoneidx));
 
 			if (READ_ONCE(pgdat->kswapd_order) < reclaim_order)
 				WRITE_ONCE(pgdat->kswapd_order, reclaim_order);
@@ -3828,7 +3832,7 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_o
 	 * go fully to sleep until explicitly woken up.
 	 */
 	if (!remaining &&
-	    prepare_kswapd_sleep(pgdat, reclaim_order, classzone_idx)) {
+	    prepare_kswapd_sleep(pgdat, reclaim_order, highest_zoneidx)) {
 		trace_mm_vmscan_kswapd_sleep(pgdat->node_id);
 
 		/*
@@ -3870,7 +3874,7 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_o
 static int kswapd(void *p)
 {
 	unsigned int alloc_order, reclaim_order;
-	unsigned int classzone_idx = MAX_NR_ZONES - 1;
+	unsigned int highest_zoneidx = MAX_NR_ZONES - 1;
 	pg_data_t *pgdat = (pg_data_t*)p;
 	struct task_struct *tsk = current;
 	const struct cpumask *cpumask = cpumask_of_node(pgdat->node_id);
@@ -3894,22 +3898,24 @@ static int kswapd(void *p)
 	set_freezable();
 
 	WRITE_ONCE(pgdat->kswapd_order, 0);
-	WRITE_ONCE(pgdat->kswapd_classzone_idx, MAX_NR_ZONES);
+	WRITE_ONCE(pgdat->kswapd_highest_zoneidx, MAX_NR_ZONES);
 	for ( ; ; ) {
 		bool ret;
 
 		alloc_order = reclaim_order = READ_ONCE(pgdat->kswapd_order);
-		classzone_idx = kswapd_classzone_idx(pgdat, classzone_idx);
+		highest_zoneidx = kswapd_highest_zoneidx(pgdat,
+							highest_zoneidx);
 
 kswapd_try_sleep:
 		kswapd_try_to_sleep(pgdat, alloc_order, reclaim_order,
-					classzone_idx);
+					highest_zoneidx);
 
-		/* Read the new order and classzone_idx */
+		/* Read the new order and highest_zoneidx */
 		alloc_order = reclaim_order = READ_ONCE(pgdat->kswapd_order);
-		classzone_idx = kswapd_classzone_idx(pgdat, classzone_idx);
+		highest_zoneidx = kswapd_highest_zoneidx(pgdat,
+							highest_zoneidx);
 		WRITE_ONCE(pgdat->kswapd_order, 0);
-		WRITE_ONCE(pgdat->kswapd_classzone_idx, MAX_NR_ZONES);
+		WRITE_ONCE(pgdat->kswapd_highest_zoneidx, MAX_NR_ZONES);
 
 		ret = try_to_freeze();
 		if (kthread_should_stop())
@@ -3930,9 +3936,10 @@ static int kswapd(void *p)
 		 * but kcompactd is woken to compact for the original
 		 * request (alloc_order).
 		 */
-		trace_mm_vmscan_kswapd_wake(pgdat->node_id, classzone_idx,
+		trace_mm_vmscan_kswapd_wake(pgdat->node_id, highest_zoneidx,
 						alloc_order);
-		reclaim_order = balance_pgdat(pgdat, alloc_order, classzone_idx);
+		reclaim_order = balance_pgdat(pgdat, alloc_order,
+						highest_zoneidx);
 		if (reclaim_order < alloc_order)
 			goto kswapd_try_sleep;
 	}
@@ -3950,7 +3957,7 @@ static int kswapd(void *p)
  * needed.
  */
 void wakeup_kswapd(struct zone *zone, gfp_t gfp_flags, int order,
-		   enum zone_type classzone_idx)
+		   enum zone_type highest_zoneidx)
 {
 	pg_data_t *pgdat;
 	enum zone_type curr_idx;
@@ -3962,10 +3969,10 @@ void wakeup_kswapd(struct zone *zone, gfp_t gfp_flags, int order,
 		return;
 
 	pgdat = zone->zone_pgdat;
-	curr_idx = READ_ONCE(pgdat->kswapd_classzone_idx);
+	curr_idx = READ_ONCE(pgdat->kswapd_highest_zoneidx);
 
-	if (curr_idx == MAX_NR_ZONES || curr_idx < classzone_idx)
-		WRITE_ONCE(pgdat->kswapd_classzone_idx, classzone_idx);
+	if (curr_idx == MAX_NR_ZONES || curr_idx < highest_zoneidx)
+		WRITE_ONCE(pgdat->kswapd_highest_zoneidx, highest_zoneidx);
 
 	if (READ_ONCE(pgdat->kswapd_order) < order)
 		WRITE_ONCE(pgdat->kswapd_order, order);
@@ -3975,8 +3982,8 @@ void wakeup_kswapd(struct zone *zone, gfp_t gfp_flags, int order,
 
 	/* Hopeless node, leave it to direct reclaim if possible */
 	if (pgdat->kswapd_failures >= MAX_RECLAIM_RETRIES ||
-	    (pgdat_balanced(pgdat, order, classzone_idx) &&
-	     !pgdat_watermark_boosted(pgdat, classzone_idx))) {
+	    (pgdat_balanced(pgdat, order, highest_zoneidx) &&
+	     !pgdat_watermark_boosted(pgdat, highest_zoneidx))) {
 		/*
 		 * There may be plenty of free memory available, but it's too
 		 * fragmented for high-order allocations.  Wake up kcompactd
@@ -3985,11 +3992,11 @@ void wakeup_kswapd(struct zone *zone, gfp_t gfp_flags, int order,
 		 * ratelimit its work.
 		 */
 		if (!(gfp_flags & __GFP_DIRECT_RECLAIM))
-			wakeup_kcompactd(pgdat, order, classzone_idx);
+			wakeup_kcompactd(pgdat, order, highest_zoneidx);
 		return;
 	}
 
-	trace_mm_vmscan_wakeup_kswapd(pgdat->node_id, classzone_idx, order,
+	trace_mm_vmscan_wakeup_kswapd(pgdat->node_id, highest_zoneidx, order,
 				      gfp_flags);
 	wake_up_interruptible(&pgdat->kswapd_wait);
 }
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 96d21a792b57..7f2e87cb7049 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -76,7 +76,7 @@ static void invalid_numa_statistics(void)
 static DEFINE_MUTEX(vm_numa_stat_lock);
 
 int sysctl_vm_numa_stat_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *length, loff_t *ppos)
+		void *buffer, size_t *length, loff_t *ppos)
 {
 	int ret, oldval;
 
@@ -1590,6 +1590,12 @@ static void zoneinfo_show_print(struct seq_file *m, pg_data_t *pgdat,
 		   zone->present_pages,
 		   zone_managed_pages(zone));
 
+	/* If unpopulated, no other information is useful */
+	if (!populated_zone(zone)) {
+		seq_putc(m, '\n');
+		return;
+	}
+
 	seq_printf(m,
 		   "\n        protection: (%ld",
 		   zone->lowmem_reserve[0]);
@@ -1597,12 +1603,6 @@ static void zoneinfo_show_print(struct seq_file *m, pg_data_t *pgdat,
 		seq_printf(m, ", %ld", zone->lowmem_reserve[i]);
 	seq_putc(m, ')');
 
-	/* If unpopulated, no other information is useful */
-	if (!populated_zone(zone)) {
-		seq_putc(m, '\n');
-		return;
-	}
-
 	for (i = 0; i < NR_VM_ZONE_STAT_ITEMS; i++)
 		seq_printf(m, "\n      %-12s %lu", zone_stat_name(i),
 			   zone_page_state(zone, i));
@@ -1751,7 +1751,7 @@ static void refresh_vm_stats(struct work_struct *work)
 }
 
 int vmstat_refresh(struct ctl_table *table, int write,
-		   void __user *buffer, size_t *lenp, loff_t *ppos)
+		   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	long val;
 	int err;
diff --git a/mm/zbud.c b/mm/zbud.c
index de5dd4ddaa82..bc93aa4e46fc 100644
--- a/mm/zbud.c
+++ b/mm/zbud.c
@@ -243,7 +243,7 @@ static struct zbud_header *init_zbud_page(struct page *page)
 	zhdr->last_chunks = 0;
 	INIT_LIST_HEAD(&zhdr->buddy);
 	INIT_LIST_HEAD(&zhdr->lru);
-	zhdr->under_reclaim = 0;
+	zhdr->under_reclaim = false;
 	return zhdr;
 }
 
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index 2f836a2b993f..f6dc0673e62c 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -293,7 +293,7 @@ struct zspage {
 };
 
 struct mapping_area {
-#ifdef CONFIG_PGTABLE_MAPPING
+#ifdef CONFIG_ZSMALLOC_PGTABLE_MAPPING
 	struct vm_struct *vm; /* vm area for mapping object that span pages */
 #else
 	char *vm_buf; /* copy buffer for objects that span pages */
@@ -1113,7 +1113,7 @@ static struct zspage *find_get_zspage(struct size_class *class)
 	return zspage;
 }
 
-#ifdef CONFIG_PGTABLE_MAPPING
+#ifdef CONFIG_ZSMALLOC_PGTABLE_MAPPING
 static inline int __zs_cpu_up(struct mapping_area *area)
 {
 	/*
@@ -1138,7 +1138,9 @@ static inline void __zs_cpu_down(struct mapping_area *area)
 static inline void *__zs_map_object(struct mapping_area *area,
 				struct page *pages[2], int off, int size)
 {
-	BUG_ON(map_vm_area(area->vm, PAGE_KERNEL, pages));
+	unsigned long addr = (unsigned long)area->vm->addr;
+
+	BUG_ON(map_kernel_range(addr, PAGE_SIZE * 2, PAGE_KERNEL, pages) < 0);
 	area->vm_addr = area->vm->addr;
 	return area->vm_addr + off;
 }
@@ -1151,7 +1153,7 @@ static inline void __zs_unmap_object(struct mapping_area *area,
 	unmap_kernel_range(addr, PAGE_SIZE * 2);
 }
 
-#else /* CONFIG_PGTABLE_MAPPING */
+#else /* CONFIG_ZSMALLOC_PGTABLE_MAPPING */
 
 static inline int __zs_cpu_up(struct mapping_area *area)
 {
@@ -1233,7 +1235,7 @@ static void __zs_unmap_object(struct mapping_area *area,
 	pagefault_enable();
 }
 
-#endif /* CONFIG_PGTABLE_MAPPING */
+#endif /* CONFIG_ZSMALLOC_PGTABLE_MAPPING */
 
 static int zs_cpu_prepare(unsigned int cpu)
 {
diff --git a/net/Kconfig b/net/Kconfig
index df8d8c9bd021..8b1f85820a6b 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -86,7 +86,7 @@ config INET
 	  "Sysctl support" below, you can change various aspects of the
 	  behavior of the TCP/IP code by writing to the (virtual) files in
 	  /proc/sys/net/ipv4/*; the options are explained in the file
-	  <file:Documentation/networking/ip-sysctl.txt>.
+	  <file:Documentation/networking/ip-sysctl.rst>.
 
 	  Short answer: say Y.
 
diff --git a/net/atm/Kconfig b/net/atm/Kconfig
index 271f682e8438..e61dcc9f85b2 100644
--- a/net/atm/Kconfig
+++ b/net/atm/Kconfig
@@ -16,7 +16,7 @@ config ATM
 	  of your ATM card below.
 
 	  Note that you need a set of user-space programs to actually make use
-	  of ATM.  See the file <file:Documentation/networking/atm.txt> for
+	  of ATM.  See the file <file:Documentation/networking/atm.rst> for
 	  further details.
 
 config ATM_CLIP
diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
index 043fd5437809..97d686d115c0 100644
--- a/net/ax25/Kconfig
+++ b/net/ax25/Kconfig
@@ -40,7 +40,7 @@ config AX25
 	  radio as well as information about how to configure an AX.25 port is
 	  contained in the AX25-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>. You might also want to
-	  check out the file <file:Documentation/networking/ax25.txt> in the
+	  check out the file <file:Documentation/networking/ax25.rst> in the
 	  kernel source. More information about digital amateur radio in
 	  general is on the WWW at
 	  <http://www.tapr.org/>.
@@ -88,7 +88,7 @@ config NETROM
 	  users as well as information about how to configure an AX.25 port is
 	  contained in the Linux Ham Wiki, available from
 	  <http://www.linux-ax25.org>. You also might want to check out the
-	  file <file:Documentation/networking/ax25.txt>. More information about
+	  file <file:Documentation/networking/ax25.rst>. More information about
 	  digital amateur radio in general is on the WWW at
 	  <http://www.tapr.org/>.
 
@@ -107,7 +107,7 @@ config ROSE
 	  users as well as information about how to configure an AX.25 port is
 	  contained in the Linux Ham Wiki, available from
 	  <http://www.linux-ax25.org>.  You also might want to check out the
-	  file <file:Documentation/networking/ax25.txt>. More information about
+	  file <file:Documentation/networking/ax25.rst>. More information about
 	  digital amateur radio in general is on the WWW at
 	  <http://www.tapr.org/>.
 
diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index a7c8dd7ae513..e87f19c82e8d 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -280,7 +280,7 @@ batadv_iv_ogm_emit_send_time(const struct batadv_priv *bat_priv)
 	unsigned int msecs;
 
 	msecs = atomic_read(&bat_priv->orig_interval) - BATADV_JITTER;
-	msecs += prandom_u32() % (2 * BATADV_JITTER);
+	msecs += prandom_u32_max(2 * BATADV_JITTER);
 
 	return jiffies + msecs_to_jiffies(msecs);
 }
@@ -288,7 +288,7 @@ batadv_iv_ogm_emit_send_time(const struct batadv_priv *bat_priv)
 /* when do we schedule a ogm packet to be sent */
 static unsigned long batadv_iv_ogm_fwd_send_time(void)
 {
-	return jiffies + msecs_to_jiffies(prandom_u32() % (BATADV_JITTER / 2));
+	return jiffies + msecs_to_jiffies(prandom_u32_max(BATADV_JITTER / 2));
 }
 
 /* apply hop penalty for a normal link */
diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index 1e3172db7492..353e49c40e7f 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -49,7 +49,7 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
 	unsigned int msecs;
 
 	msecs = atomic_read(&hard_iface->bat_v.elp_interval) - BATADV_JITTER;
-	msecs += prandom_u32() % (2 * BATADV_JITTER);
+	msecs += prandom_u32_max(2 * BATADV_JITTER);
 
 	queue_delayed_work(batadv_event_workqueue, &hard_iface->bat_v.elp_wq,
 			   msecs_to_jiffies(msecs));
diff --git a/net/batman-adv/bat_v_ogm.c b/net/batman-adv/bat_v_ogm.c
index 969466218999..18028b9f95f0 100644
--- a/net/batman-adv/bat_v_ogm.c
+++ b/net/batman-adv/bat_v_ogm.c
@@ -88,7 +88,7 @@ static void batadv_v_ogm_start_queue_timer(struct batadv_hard_iface *hard_iface)
 	unsigned int msecs = BATADV_MAX_AGGREGATION_MS * 1000;
 
 	/* msecs * [0.9, 1.1] */
-	msecs += prandom_u32() % (msecs / 5) - (msecs / 10);
+	msecs += prandom_u32_max(msecs / 5) - (msecs / 10);
 	queue_delayed_work(batadv_event_workqueue, &hard_iface->bat_v.aggr_wq,
 			   msecs_to_jiffies(msecs / 1000));
 }
@@ -107,7 +107,7 @@ static void batadv_v_ogm_start_timer(struct batadv_priv *bat_priv)
 		return;
 
 	msecs = atomic_read(&bat_priv->orig_interval) - BATADV_JITTER;
-	msecs += prandom_u32() % (2 * BATADV_JITTER);
+	msecs += prandom_u32_max(2 * BATADV_JITTER);
 	queue_delayed_work(batadv_event_workqueue, &bat_priv->bat_v.ogm_wq,
 			   msecs_to_jiffies(msecs));
 }
@@ -893,7 +893,7 @@ static void batadv_v_ogm_process(const struct sk_buff *skb, int ogm_offset,
 
 	orig_node = batadv_v_ogm_orig_get(bat_priv, ogm_packet->orig);
 	if (!orig_node)
-		return;
+		goto out;
 
 	neigh_node = batadv_neigh_node_get_or_create(orig_node, if_incoming,
 						     ethhdr->h_source);
diff --git a/net/batman-adv/distributed-arp-table.h b/net/batman-adv/distributed-arp-table.h
index 2bff2f4a325c..4e031661682a 100644
--- a/net/batman-adv/distributed-arp-table.h
+++ b/net/batman-adv/distributed-arp-table.h
@@ -163,11 +163,6 @@ static inline void batadv_dat_init_own_addr(struct batadv_priv *bat_priv,
 {
 }
 
-static inline void batadv_arp_change_timeout(struct net_device *soft_iface,
-					     const char *name)
-{
-}
-
 static inline int batadv_dat_init(struct batadv_priv *bat_priv)
 {
 	return 0;
diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h
index 2a234d0ad445..61d8dbe8c954 100644
--- a/net/batman-adv/main.h
+++ b/net/batman-adv/main.h
@@ -13,7 +13,7 @@
 #define BATADV_DRIVER_DEVICE "batman-adv"
 
 #ifndef BATADV_SOURCE_VERSION
-#define BATADV_SOURCE_VERSION "2020.1"
+#define BATADV_SOURCE_VERSION "2020.2"
 #endif
 
 /* B.A.T.M.A.N. parameters */
diff --git a/net/batman-adv/network-coding.c b/net/batman-adv/network-coding.c
index 8f0717c3f7b5..b0469d15da0e 100644
--- a/net/batman-adv/network-coding.c
+++ b/net/batman-adv/network-coding.c
@@ -1009,15 +1009,8 @@ static struct batadv_nc_path *batadv_nc_get_path(struct batadv_priv *bat_priv,
  */
 static u8 batadv_nc_random_weight_tq(u8 tq)
 {
-	u8 rand_val, rand_tq;
-
-	get_random_bytes(&rand_val, sizeof(rand_val));
-
 	/* randomize the estimated packet loss (max TQ - estimated TQ) */
-	rand_tq = rand_val * (BATADV_TQ_MAX_VALUE - tq);
-
-	/* normalize the randomized packet loss */
-	rand_tq /= BATADV_TQ_MAX_VALUE;
+	u8 rand_tq = prandom_u32_max(BATADV_TQ_MAX_VALUE + 1 - tq);
 
 	/* convert to (randomized) estimated tq again */
 	return BATADV_TQ_MAX_VALUE - rand_tq;
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index c45962d8527b..0f962dcd239e 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -1150,7 +1150,7 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj,
 	ret = batadv_parse_throughput(net_dev, buff, "throughput_override",
 				      &tp_override);
 	if (!ret)
-		return count;
+		goto out;
 
 	old_tp_override = atomic_read(&hard_iface->bat_v.throughput_override);
 	if (old_tp_override == tp_override)
@@ -1190,6 +1190,7 @@ static ssize_t batadv_show_throughput_override(struct kobject *kobj,
 
 	tp_override = atomic_read(&hard_iface->bat_v.throughput_override);
 
+	batadv_hardif_put(hard_iface);
 	return sprintf(buff, "%u.%u MBit\n", tp_override / 10,
 		       tp_override % 10);
 }
diff --git a/net/batman-adv/trace.h b/net/batman-adv/trace.h
index f631b1e01b89..a87547570b4e 100644
--- a/net/batman-adv/trace.h
+++ b/net/batman-adv/trace.h
@@ -15,7 +15,6 @@
 #include <linux/percpu.h>
 #include <linux/printk.h>
 #include <linux/tracepoint.h>
-#include <linux/types.h>
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM batadv
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 4a17a66cc572..d152b8e81f61 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -1086,7 +1086,7 @@ struct batadv_priv_bla {
  * struct batadv_priv_debug_log - debug logging data
  */
 struct batadv_priv_debug_log {
-	/** @log_buff: buffer holding the logs (ring bufer) */
+	/** @log_buff: buffer holding the logs (ring buffer) */
 	char log_buff[BATADV_LOG_BUF_LEN];
 
 	/** @log_start: index of next character to read */
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index 165148c7c4ce..9e25c6570170 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -93,6 +93,21 @@ config BT_LEDS
 	  This option selects a few LED triggers for different
 	  Bluetooth events.
 
+config BT_MSFTEXT
+	bool "Enable Microsoft extensions"
+	depends on BT
+	help
+	  This options enables support for the Microsoft defined HCI
+	  vendor extensions.
+
+config BT_DEBUGFS
+	bool "Export Bluetooth internals in debugfs"
+	depends on BT && DEBUG_FS
+	default y
+	help
+	  Provide extensive information about internal Bluetooth states
+	  in debugfs.
+
 config BT_SELFTEST
 	bool "Bluetooth self testing support"
 	depends on BT && DEBUG_KERNEL
@@ -120,12 +135,4 @@ config BT_SELFTEST_SMP
 	  Run test cases for SMP cryptographic functionality, including both
 	  legacy SMP as well as the Secure Connections features.
 
-config BT_DEBUGFS
-	bool "Export Bluetooth internals in debugfs"
-	depends on BT && DEBUG_FS
-	default y
-	help
-	  Provide extensive information about internal Bluetooth states
-	  in debugfs.
-
 source "drivers/bluetooth/Kconfig"
diff --git a/net/bluetooth/Makefile b/net/bluetooth/Makefile
index fda41c0b4781..41dd541a44a5 100644
--- a/net/bluetooth/Makefile
+++ b/net/bluetooth/Makefile
@@ -19,5 +19,6 @@ bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \
 bluetooth-$(CONFIG_BT_BREDR) += sco.o
 bluetooth-$(CONFIG_BT_HS) += a2mp.o amp.o
 bluetooth-$(CONFIG_BT_LEDS) += leds.o
+bluetooth-$(CONFIG_BT_MSFTEXT) += msft.o
 bluetooth-$(CONFIG_BT_DEBUGFS) += hci_debugfs.o
 bluetooth-$(CONFIG_BT_SELFTEST) += selftest.o
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index e245bc155cc2..07c34c55fc50 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -122,8 +122,18 @@ static void hci_conn_cleanup(struct hci_conn *conn)
 
 	hci_conn_hash_del(hdev, conn);
 
-	if (hdev->notify)
-		hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
+	if (conn->type == SCO_LINK || conn->type == ESCO_LINK) {
+		switch (conn->setting & SCO_AIRMODE_MASK) {
+		case SCO_AIRMODE_CVSD:
+		case SCO_AIRMODE_TRANSP:
+			if (hdev->notify)
+				hdev->notify(hdev, HCI_NOTIFY_DISABLE_SCO);
+			break;
+		}
+	} else {
+		if (hdev->notify)
+			hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
+	}
 
 	hci_conn_del_sysfs(conn);
 
@@ -577,8 +587,15 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
 	hci_dev_hold(hdev);
 
 	hci_conn_hash_add(hdev, conn);
-	if (hdev->notify)
-		hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
+
+	/* The SCO and eSCO connections will only be notified when their
+	 * setup has been completed. This is different to ACL links which
+	 * can be notified right away.
+	 */
+	if (conn->type != SCO_LINK && conn->type != ESCO_LINK) {
+		if (hdev->notify)
+			hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
+	}
 
 	hci_conn_init_sysfs(conn);
 
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 2e7bc2da8371..51d399273276 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -44,6 +44,7 @@
 #include "hci_debugfs.h"
 #include "smp.h"
 #include "leds.h"
+#include "msft.h"
 
 static void hci_rx_work(struct work_struct *work);
 static void hci_cmd_work(struct work_struct *work);
@@ -637,6 +638,14 @@ static int hci_init3_req(struct hci_request *req, unsigned long opt)
 		if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT)
 			events[0] |= 0x40;	/* LE Data Length Change */
 
+		/* If the controller supports LL Privacy feature, enable
+		 * the corresponding event.
+		 */
+		if (hdev->le_features[0] & HCI_LE_LL_PRIVACY)
+			events[1] |= 0x02;	/* LE Enhanced Connection
+						 * Complete
+						 */
+
 		/* If the controller supports Extended Scanner Filter
 		 * Policies, enable the correspondig event.
 		 */
@@ -710,14 +719,6 @@ static int hci_init3_req(struct hci_request *req, unsigned long opt)
 						 * Report
 						 */
 
-		/* If the controller supports the LE Extended Create Connection
-		 * command, enable the corresponding event.
-		 */
-		if (use_ext_conn(hdev))
-			events[1] |= 0x02;      /* LE Enhanced Connection
-						 * Complete
-						 */
-
 		/* If the controller supports the LE Extended Advertising
 		 * command, enable the corresponding event.
 		 */
@@ -826,6 +827,10 @@ static int hci_init4_req(struct hci_request *req, unsigned long opt)
 	if (hdev->commands[29] & 0x20)
 		hci_req_add(req, HCI_OP_READ_LOCAL_CODECS, 0, NULL);
 
+	/* Read local pairing options if the HCI command is supported */
+	if (hdev->commands[41] & 0x08)
+		hci_req_add(req, HCI_OP_READ_LOCAL_PAIRING_OPTS, 0, NULL);
+
 	/* Get MWS transport configuration if the HCI command is supported */
 	if (hdev->commands[30] & 0x08)
 		hci_req_add(req, HCI_OP_GET_MWS_TRANSPORT_CONFIG, 0, NULL);
@@ -1563,6 +1568,8 @@ static int hci_dev_do_open(struct hci_dev *hdev)
 	    hci_dev_test_flag(hdev, HCI_VENDOR_DIAG) && hdev->set_diag)
 		ret = hdev->set_diag(hdev, true);
 
+	msft_do_open(hdev);
+
 	clear_bit(HCI_INIT, &hdev->flags);
 
 	if (!ret) {
@@ -1758,6 +1765,8 @@ int hci_dev_do_close(struct hci_dev *hdev)
 
 	hci_sock_dev_event(hdev, HCI_DEV_DOWN);
 
+	msft_do_close(hdev);
+
 	if (hdev->flush)
 		hdev->flush(hdev);
 
@@ -4240,6 +4249,54 @@ static void __check_timeout(struct hci_dev *hdev, unsigned int cnt)
 	}
 }
 
+/* Schedule SCO */
+static void hci_sched_sco(struct hci_dev *hdev)
+{
+	struct hci_conn *conn;
+	struct sk_buff *skb;
+	int quote;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!hci_conn_num(hdev, SCO_LINK))
+		return;
+
+	while (hdev->sco_cnt && (conn = hci_low_sent(hdev, SCO_LINK, &quote))) {
+		while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
+			BT_DBG("skb %p len %d", skb, skb->len);
+			hci_send_frame(hdev, skb);
+
+			conn->sent++;
+			if (conn->sent == ~0)
+				conn->sent = 0;
+		}
+	}
+}
+
+static void hci_sched_esco(struct hci_dev *hdev)
+{
+	struct hci_conn *conn;
+	struct sk_buff *skb;
+	int quote;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!hci_conn_num(hdev, ESCO_LINK))
+		return;
+
+	while (hdev->sco_cnt && (conn = hci_low_sent(hdev, ESCO_LINK,
+						     &quote))) {
+		while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
+			BT_DBG("skb %p len %d", skb, skb->len);
+			hci_send_frame(hdev, skb);
+
+			conn->sent++;
+			if (conn->sent == ~0)
+				conn->sent = 0;
+		}
+	}
+}
+
 static void hci_sched_acl_pkt(struct hci_dev *hdev)
 {
 	unsigned int cnt = hdev->acl_cnt;
@@ -4271,6 +4328,10 @@ static void hci_sched_acl_pkt(struct hci_dev *hdev)
 			hdev->acl_cnt--;
 			chan->sent++;
 			chan->conn->sent++;
+
+			/* Send pending SCO packets right away */
+			hci_sched_sco(hdev);
+			hci_sched_esco(hdev);
 		}
 	}
 
@@ -4355,54 +4416,6 @@ static void hci_sched_acl(struct hci_dev *hdev)
 	}
 }
 
-/* Schedule SCO */
-static void hci_sched_sco(struct hci_dev *hdev)
-{
-	struct hci_conn *conn;
-	struct sk_buff *skb;
-	int quote;
-
-	BT_DBG("%s", hdev->name);
-
-	if (!hci_conn_num(hdev, SCO_LINK))
-		return;
-
-	while (hdev->sco_cnt && (conn = hci_low_sent(hdev, SCO_LINK, &quote))) {
-		while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
-			BT_DBG("skb %p len %d", skb, skb->len);
-			hci_send_frame(hdev, skb);
-
-			conn->sent++;
-			if (conn->sent == ~0)
-				conn->sent = 0;
-		}
-	}
-}
-
-static void hci_sched_esco(struct hci_dev *hdev)
-{
-	struct hci_conn *conn;
-	struct sk_buff *skb;
-	int quote;
-
-	BT_DBG("%s", hdev->name);
-
-	if (!hci_conn_num(hdev, ESCO_LINK))
-		return;
-
-	while (hdev->sco_cnt && (conn = hci_low_sent(hdev, ESCO_LINK,
-						     &quote))) {
-		while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
-			BT_DBG("skb %p len %d", skb, skb->len);
-			hci_send_frame(hdev, skb);
-
-			conn->sent++;
-			if (conn->sent == ~0)
-				conn->sent = 0;
-		}
-	}
-}
-
 static void hci_sched_le(struct hci_dev *hdev)
 {
 	struct hci_chan *chan;
@@ -4437,6 +4450,10 @@ static void hci_sched_le(struct hci_dev *hdev)
 			cnt--;
 			chan->sent++;
 			chan->conn->sent++;
+
+			/* Send pending SCO packets right away */
+			hci_sched_sco(hdev);
+			hci_sched_esco(hdev);
 		}
 	}
 
@@ -4459,9 +4476,9 @@ static void hci_tx_work(struct work_struct *work)
 
 	if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 		/* Schedule queues and send stuff to HCI driver */
-		hci_sched_acl(hdev);
 		hci_sched_sco(hdev);
 		hci_sched_esco(hdev);
+		hci_sched_acl(hdev);
 		hci_sched_le(hdev);
 	}
 
diff --git a/net/bluetooth/hci_debugfs.c b/net/bluetooth/hci_debugfs.c
index 6b1314c738b8..5e8af2658e44 100644
--- a/net/bluetooth/hci_debugfs.c
+++ b/net/bluetooth/hci_debugfs.c
@@ -1075,6 +1075,50 @@ DEFINE_SIMPLE_ATTRIBUTE(auth_payload_timeout_fops,
 			auth_payload_timeout_get,
 			auth_payload_timeout_set, "%llu\n");
 
+static ssize_t force_no_mitm_read(struct file *file,
+				  char __user *user_buf,
+				  size_t count, loff_t *ppos)
+{
+	struct hci_dev *hdev = file->private_data;
+	char buf[3];
+
+	buf[0] = hci_dev_test_flag(hdev, HCI_FORCE_NO_MITM) ? 'Y' : 'N';
+	buf[1] = '\n';
+	buf[2] = '\0';
+	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static ssize_t force_no_mitm_write(struct file *file,
+				   const char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+	struct hci_dev *hdev = file->private_data;
+	char buf[32];
+	size_t buf_size = min(count, (sizeof(buf) - 1));
+	bool enable;
+
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	buf[buf_size] = '\0';
+	if (strtobool(buf, &enable))
+		return -EINVAL;
+
+	if (enable == hci_dev_test_flag(hdev, HCI_FORCE_NO_MITM))
+		return -EALREADY;
+
+	hci_dev_change_flag(hdev, HCI_FORCE_NO_MITM);
+
+	return count;
+}
+
+static const struct file_operations force_no_mitm_fops = {
+	.open		= simple_open,
+	.read		= force_no_mitm_read,
+	.write		= force_no_mitm_write,
+	.llseek		= default_llseek,
+};
+
 DEFINE_QUIRK_ATTRIBUTE(quirk_strict_duplicate_filter,
 		       HCI_QUIRK_STRICT_DUPLICATE_FILTER);
 DEFINE_QUIRK_ATTRIBUTE(quirk_simultaneous_discovery,
@@ -1134,6 +1178,8 @@ void hci_debugfs_create_le(struct hci_dev *hdev)
 			    &max_key_size_fops);
 	debugfs_create_file("auth_payload_timeout", 0644, hdev->debugfs, hdev,
 			    &auth_payload_timeout_fops);
+	debugfs_create_file("force_no_mitm", 0644, hdev->debugfs, hdev,
+			    &force_no_mitm_fops);
 
 	debugfs_create_file("quirk_strict_duplicate_filter", 0644,
 			    hdev->debugfs, hdev,
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 0a591be8b0ae..006c24e04b44 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -35,6 +35,7 @@
 #include "a2mp.h"
 #include "amp.h"
 #include "smp.h"
+#include "msft.h"
 
 #define ZERO_KEY "\x00\x00\x00\x00\x00\x00\x00\x00" \
 		 "\x00\x00\x00\x00\x00\x00\x00\x00"
@@ -746,6 +747,23 @@ static void hci_cc_read_bd_addr(struct hci_dev *hdev, struct sk_buff *skb)
 		bacpy(&hdev->setup_addr, &rp->bdaddr);
 }
 
+static void hci_cc_read_local_pairing_opts(struct hci_dev *hdev,
+					   struct sk_buff *skb)
+{
+	struct hci_rp_read_local_pairing_opts *rp = (void *) skb->data;
+
+	BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
+
+	if (rp->status)
+		return;
+
+	if (hci_dev_test_flag(hdev, HCI_SETUP) ||
+	    hci_dev_test_flag(hdev, HCI_CONFIG)) {
+		hdev->pairing_opts = rp->pairing_opts;
+		hdev->max_enc_key_size = rp->max_key_size;
+	}
+}
+
 static void hci_cc_read_page_scan_activity(struct hci_dev *hdev,
 					   struct sk_buff *skb)
 {
@@ -2607,8 +2625,16 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
 	if (ev->status) {
 		hci_connect_cfm(conn, ev->status);
 		hci_conn_del(conn);
-	} else if (ev->link_type != ACL_LINK)
+	} else if (ev->link_type == SCO_LINK) {
+		switch (conn->setting & SCO_AIRMODE_MASK) {
+		case SCO_AIRMODE_CVSD:
+			if (hdev->notify)
+				hdev->notify(hdev, HCI_NOTIFY_ENABLE_SCO_CVSD);
+			break;
+		}
+
 		hci_connect_cfm(conn, ev->status);
+	}
 
 unlock:
 	hci_dev_unlock(hdev);
@@ -3334,6 +3360,10 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
 		hci_cc_read_bd_addr(hdev, skb);
 		break;
 
+	case HCI_OP_READ_LOCAL_PAIRING_OPTS:
+		hci_cc_read_local_pairing_opts(hdev, skb);
+		break;
+
 	case HCI_OP_READ_PAGE_SCAN_ACTIVITY:
 		hci_cc_read_page_scan_activity(hdev, skb);
 		break;
@@ -4307,6 +4337,19 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
 		break;
 	}
 
+	bt_dev_dbg(hdev, "SCO connected with air mode: %02x", ev->air_mode);
+
+	switch (conn->setting & SCO_AIRMODE_MASK) {
+	case SCO_AIRMODE_CVSD:
+		if (hdev->notify)
+			hdev->notify(hdev, HCI_NOTIFY_ENABLE_SCO_CVSD);
+		break;
+	case SCO_AIRMODE_TRANSP:
+		if (hdev->notify)
+			hdev->notify(hdev, HCI_NOTIFY_ENABLE_SCO_TRANSP);
+		break;
+	}
+
 	hci_connect_cfm(conn, ev->status);
 	if (ev->status)
 		hci_conn_del(conn);
@@ -5245,7 +5288,9 @@ static struct hci_conn *check_pending_le_conn(struct hci_dev *hdev,
 	/* Most controller will fail if we try to create new connections
 	 * while we have an existing one in slave role.
 	 */
-	if (hdev->conn_hash.le_num_slave > 0)
+	if (hdev->conn_hash.le_num_slave > 0 &&
+	    (!test_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks) ||
+	     !(hdev->le_states[3] & 0x10)))
 		return NULL;
 
 	/* If we're not connectable only connect devices that we have in
@@ -5269,7 +5314,7 @@ static struct hci_conn *check_pending_le_conn(struct hci_dev *hdev,
 		case HCI_AUTO_CONN_ALWAYS:
 			/* Devices advertising with ADV_IND or ADV_DIRECT_IND
 			 * are triggering a connection attempt. This means
-			 * that incoming connectioms from slave device are
+			 * that incoming connections from slave device are
 			 * accepted and also outgoing connections to slave
 			 * devices are established when found.
 			 */
@@ -5353,7 +5398,8 @@ static void process_adv_report(struct hci_dev *hdev, u8 type, bdaddr_t *bdaddr,
 
 	/* Adjust for actual length */
 	if (len != real_len) {
-		bt_dev_err_ratelimited(hdev, "advertising data len corrected");
+		bt_dev_err_ratelimited(hdev, "advertising data len corrected %u -> %u",
+				       len, real_len);
 		len = real_len;
 	}
 
@@ -6145,6 +6191,10 @@ void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
 		hci_num_comp_blocks_evt(hdev, skb);
 		break;
 
+	case HCI_EV_VENDOR:
+		msft_vendor_evt(hdev, skb);
+		break;
+
 	default:
 		BT_DBG("%s event 0x%2.2x", hdev->name, event);
 		break;
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index 649e1e5ed446..9ea40106ef17 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -2723,6 +2723,8 @@ static int active_scan(struct hci_request *req, unsigned long opt)
 	uint16_t interval = opt;
 	struct hci_dev *hdev = req->hdev;
 	u8 own_addr_type;
+	/* White list is not used for discovery */
+	u8 filter_policy = 0x00;
 	int err;
 
 	BT_DBG("%s", hdev->name);
@@ -2744,7 +2746,7 @@ static int active_scan(struct hci_request *req, unsigned long opt)
 		own_addr_type = ADDR_LE_DEV_PUBLIC;
 
 	hci_req_start_scan(req, LE_SCAN_ACTIVE, interval, DISCOV_LE_SCAN_WIN,
-			   own_addr_type, 0);
+			   own_addr_type, filter_policy);
 	return 0;
 }
 
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 117ba20ea194..1cea42ee1e92 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -395,6 +395,24 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr,
 	return sizeof(struct sockaddr_l2);
 }
 
+static int l2cap_get_mode(struct l2cap_chan *chan)
+{
+	switch (chan->mode) {
+	case L2CAP_MODE_BASIC:
+		return BT_MODE_BASIC;
+	case L2CAP_MODE_ERTM:
+		return BT_MODE_ERTM;
+	case L2CAP_MODE_STREAMING:
+		return BT_MODE_STREAMING;
+	case L2CAP_MODE_LE_FLOWCTL:
+		return BT_MODE_LE_FLOWCTL;
+	case L2CAP_MODE_EXT_FLOWCTL:
+		return BT_MODE_EXT_FLOWCTL;
+	}
+
+	return -EINVAL;
+}
+
 static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
 				     char __user *optval, int __user *optlen)
 {
@@ -424,6 +442,20 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
 			break;
 		}
 
+		/* Only BR/EDR modes are supported here */
+		switch (chan->mode) {
+		case L2CAP_MODE_BASIC:
+		case L2CAP_MODE_ERTM:
+		case L2CAP_MODE_STREAMING:
+			break;
+		default:
+			err = -EINVAL;
+			break;
+		}
+
+		if (err < 0)
+			break;
+
 		memset(&opts, 0, sizeof(opts));
 		opts.imtu     = chan->imtu;
 		opts.omtu     = chan->omtu;
@@ -508,7 +540,7 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
 	struct bt_security sec;
 	struct bt_power pwr;
 	u32 phys;
-	int len, err = 0;
+	int len, mode, err = 0;
 
 	BT_DBG("sk %p", sk);
 
@@ -624,6 +656,27 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
 			err = -EFAULT;
 		break;
 
+	case BT_MODE:
+		if (!enable_ecred) {
+			err = -ENOPROTOOPT;
+			break;
+		}
+
+		if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+			err = -EINVAL;
+			break;
+		}
+
+		mode = l2cap_get_mode(chan);
+		if (mode < 0) {
+			err = mode;
+			break;
+		}
+
+		if (put_user(mode, (u8 __user *) optval))
+			err = -EFAULT;
+		break;
+
 	default:
 		err = -ENOPROTOOPT;
 		break;
@@ -698,10 +751,8 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
 			break;
 		}
 
-		chan->mode = opts.mode;
-		switch (chan->mode) {
-		case L2CAP_MODE_LE_FLOWCTL:
-			break;
+		/* Only BR/EDR modes are supported here */
+		switch (opts.mode) {
 		case L2CAP_MODE_BASIC:
 			clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
 			break;
@@ -715,6 +766,11 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
 			break;
 		}
 
+		if (err < 0)
+			break;
+
+		chan->mode = opts.mode;
+
 		BT_DBG("mode 0x%2.2x", chan->mode);
 
 		chan->imtu = opts.imtu;
@@ -763,6 +819,45 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
 	return err;
 }
 
+static int l2cap_set_mode(struct l2cap_chan *chan, u8 mode)
+{
+	switch (mode) {
+	case BT_MODE_BASIC:
+		if (bdaddr_type_is_le(chan->src_type))
+			return -EINVAL;
+		mode = L2CAP_MODE_BASIC;
+		clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
+		break;
+	case BT_MODE_ERTM:
+		if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
+			return -EINVAL;
+		mode = L2CAP_MODE_ERTM;
+		break;
+	case BT_MODE_STREAMING:
+		if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
+			return -EINVAL;
+		mode = L2CAP_MODE_STREAMING;
+		break;
+	case BT_MODE_LE_FLOWCTL:
+		if (!bdaddr_type_is_le(chan->src_type))
+			return -EINVAL;
+		mode = L2CAP_MODE_LE_FLOWCTL;
+		break;
+	case BT_MODE_EXT_FLOWCTL:
+		/* TODO: Add support for ECRED PDUs to BR/EDR */
+		if (!bdaddr_type_is_le(chan->src_type))
+			return -EINVAL;
+		mode = L2CAP_MODE_EXT_FLOWCTL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	chan->mode = mode;
+
+	return 0;
+}
+
 static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 				 char __user *optval, unsigned int optlen)
 {
@@ -968,6 +1063,39 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 
 		break;
 
+	case BT_MODE:
+		if (!enable_ecred) {
+			err = -ENOPROTOOPT;
+			break;
+		}
+
+		BT_DBG("sk->sk_state %u", sk->sk_state);
+
+		if (sk->sk_state != BT_BOUND) {
+			err = -EINVAL;
+			break;
+		}
+
+		if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+			err = -EINVAL;
+			break;
+		}
+
+		if (get_user(opt, (u8 __user *) optval)) {
+			err = -EFAULT;
+			break;
+		}
+
+		BT_DBG("opt %u", opt);
+
+		err = l2cap_set_mode(chan, opt);
+		if (err)
+			break;
+
+		BT_DBG("mode 0x%2.2x", chan->mode);
+
+		break;
+
 	default:
 		err = -ENOPROTOOPT;
 		break;
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 6552003a170e..f8c0a4fc8090 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -38,7 +38,7 @@
 #include "mgmt_util.h"
 
 #define MGMT_VERSION	1
-#define MGMT_REVISION	16
+#define MGMT_REVISION	17
 
 static const u16 mgmt_commands[] = {
 	MGMT_OP_READ_INDEX_LIST,
@@ -108,6 +108,7 @@ static const u16 mgmt_commands[] = {
 	MGMT_OP_SET_APPEARANCE,
 	MGMT_OP_SET_BLOCKED_KEYS,
 	MGMT_OP_SET_WIDEBAND_SPEECH,
+	MGMT_OP_READ_SECURITY_INFO,
 };
 
 static const u16 mgmt_events[] = {
@@ -155,6 +156,7 @@ static const u16 mgmt_untrusted_commands[] = {
 	MGMT_OP_READ_CONFIG_INFO,
 	MGMT_OP_READ_EXT_INDEX_LIST,
 	MGMT_OP_READ_EXT_INFO,
+	MGMT_OP_READ_SECURITY_INFO,
 };
 
 static const u16 mgmt_untrusted_events[] = {
@@ -3659,6 +3661,55 @@ static int set_wideband_speech(struct sock *sk, struct hci_dev *hdev,
 	return err;
 }
 
+static int read_security_info(struct sock *sk, struct hci_dev *hdev,
+			      void *data, u16 data_len)
+{
+	char buf[16];
+	struct mgmt_rp_read_security_info *rp = (void *)buf;
+	u16 sec_len = 0;
+	u8 flags = 0;
+
+	bt_dev_dbg(hdev, "sock %p", sk);
+
+	memset(&buf, 0, sizeof(buf));
+
+	hci_dev_lock(hdev);
+
+	/* When the Read Simple Pairing Options command is supported, then
+	 * the remote public key validation is supported.
+	 */
+	if (hdev->commands[41] & 0x08)
+		flags |= 0x01;	/* Remote public key validation (BR/EDR) */
+
+	flags |= 0x02;		/* Remote public key validation (LE) */
+
+	/* When the Read Encryption Key Size command is supported, then the
+	 * encryption key size is enforced.
+	 */
+	if (hdev->commands[20] & 0x10)
+		flags |= 0x04;	/* Encryption key size enforcement (BR/EDR) */
+
+	flags |= 0x08;		/* Encryption key size enforcement (LE) */
+
+	sec_len = eir_append_data(rp->sec, sec_len, 0x01, &flags, 1);
+
+	/* When the Read Simple Pairing Options command is supported, then
+	 * also max encryption key size information is provided.
+	 */
+	if (hdev->commands[41] & 0x08)
+		sec_len = eir_append_le16(rp->sec, sec_len, 0x02,
+					  hdev->max_enc_key_size);
+
+	sec_len = eir_append_le16(rp->sec, sec_len, 0x03, SMP_MAX_ENC_KEY_SIZE);
+
+	rp->sec_len = cpu_to_le16(sec_len);
+
+	hci_dev_unlock(hdev);
+
+	return mgmt_cmd_complete(sk, hdev->id, MGMT_OP_READ_SECURITY_INFO, 0,
+				 rp, sizeof(*rp) + sec_len);
+}
+
 static void read_local_oob_data_complete(struct hci_dev *hdev, u8 status,
 				         u16 opcode, struct sk_buff *skb)
 {
@@ -7099,6 +7150,8 @@ static const struct hci_mgmt_handler mgmt_handlers[] = {
 	{ set_blocked_keys,	   MGMT_OP_SET_BLOCKED_KEYS_SIZE,
 						HCI_MGMT_VAR_LEN },
 	{ set_wideband_speech,	   MGMT_SETTING_SIZE },
+	{ read_security_info,      MGMT_READ_SECURITY_INFO_SIZE,
+						HCI_MGMT_UNTRUSTED },
 };
 
 void mgmt_index_added(struct hci_dev *hdev)
diff --git a/net/bluetooth/msft.c b/net/bluetooth/msft.c
new file mode 100644
index 000000000000..d6c4e6b5ae77
--- /dev/null
+++ b/net/bluetooth/msft.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Google Corporation
+ */
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "msft.h"
+
+#define MSFT_OP_READ_SUPPORTED_FEATURES		0x00
+struct msft_cp_read_supported_features {
+	__u8   sub_opcode;
+} __packed;
+struct msft_rp_read_supported_features {
+	__u8   status;
+	__u8   sub_opcode;
+	__le64 features;
+	__u8   evt_prefix_len;
+	__u8   evt_prefix[0];
+} __packed;
+
+struct msft_data {
+	__u64 features;
+	__u8  evt_prefix_len;
+	__u8  *evt_prefix;
+};
+
+static bool read_supported_features(struct hci_dev *hdev,
+				    struct msft_data *msft)
+{
+	struct msft_cp_read_supported_features cp;
+	struct msft_rp_read_supported_features *rp;
+	struct sk_buff *skb;
+
+	cp.sub_opcode = MSFT_OP_READ_SUPPORTED_FEATURES;
+
+	skb = __hci_cmd_sync(hdev, hdev->msft_opcode, sizeof(cp), &cp,
+			     HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Failed to read MSFT supported features (%ld)",
+			   PTR_ERR(skb));
+		return false;
+	}
+
+	if (skb->len < sizeof(*rp)) {
+		bt_dev_err(hdev, "MSFT supported features length mismatch");
+		goto failed;
+	}
+
+	rp = (struct msft_rp_read_supported_features *)skb->data;
+
+	if (rp->sub_opcode != MSFT_OP_READ_SUPPORTED_FEATURES)
+		goto failed;
+
+	if (rp->evt_prefix_len > 0) {
+		msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len,
+					   GFP_KERNEL);
+		if (!msft->evt_prefix)
+			goto failed;
+	}
+
+	msft->evt_prefix_len = rp->evt_prefix_len;
+	msft->features = __le64_to_cpu(rp->features);
+
+	kfree_skb(skb);
+	return true;
+
+failed:
+	kfree_skb(skb);
+	return false;
+}
+
+void msft_do_open(struct hci_dev *hdev)
+{
+	struct msft_data *msft;
+
+	if (hdev->msft_opcode == HCI_OP_NOP)
+		return;
+
+	bt_dev_dbg(hdev, "Initialize MSFT extension");
+
+	msft = kzalloc(sizeof(*msft), GFP_KERNEL);
+	if (!msft)
+		return;
+
+	if (!read_supported_features(hdev, msft)) {
+		kfree(msft);
+		return;
+	}
+
+	hdev->msft_data = msft;
+}
+
+void msft_do_close(struct hci_dev *hdev)
+{
+	struct msft_data *msft = hdev->msft_data;
+
+	if (!msft)
+		return;
+
+	bt_dev_dbg(hdev, "Cleanup of MSFT extension");
+
+	hdev->msft_data = NULL;
+
+	kfree(msft->evt_prefix);
+	kfree(msft);
+}
+
+void msft_vendor_evt(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct msft_data *msft = hdev->msft_data;
+	u8 event;
+
+	if (!msft)
+		return;
+
+	/* When the extension has defined an event prefix, check that it
+	 * matches, and otherwise just return.
+	 */
+	if (msft->evt_prefix_len > 0) {
+		if (skb->len < msft->evt_prefix_len)
+			return;
+
+		if (memcmp(skb->data, msft->evt_prefix, msft->evt_prefix_len))
+			return;
+
+		skb_pull(skb, msft->evt_prefix_len);
+	}
+
+	/* Every event starts at least with an event code and the rest of
+	 * the data is variable and depends on the event code.
+	 */
+	if (skb->len < 1)
+		return;
+
+	event = *skb->data;
+	skb_pull(skb, 1);
+
+	bt_dev_dbg(hdev, "MSFT vendor event %u", event);
+}
diff --git a/net/bluetooth/msft.h b/net/bluetooth/msft.h
new file mode 100644
index 000000000000..5aa9130e1f8a
--- /dev/null
+++ b/net/bluetooth/msft.h
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Google Corporation
+ */
+
+#if IS_ENABLED(CONFIG_BT_MSFTEXT)
+
+void msft_do_open(struct hci_dev *hdev);
+void msft_do_close(struct hci_dev *hdev);
+void msft_vendor_evt(struct hci_dev *hdev, struct sk_buff *skb);
+
+#else
+
+static inline void msft_do_open(struct hci_dev *hdev) {}
+static inline void msft_do_close(struct hci_dev *hdev) {}
+static inline void msft_vendor_evt(struct hci_dev *hdev, struct sk_buff *skb) {}
+
+#endif
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 1476a91ce935..df22cbf94693 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -854,7 +854,7 @@ static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth,
 	struct l2cap_chan *chan = conn->smp;
 	struct smp_chan *smp = chan->data;
 	u32 passkey = 0;
-	int ret = 0;
+	int ret;
 
 	/* Initialize key for JUST WORKS */
 	memset(smp->tk, 0, sizeof(smp->tk));
@@ -883,9 +883,16 @@ static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth,
 	    hcon->io_capability == HCI_IO_NO_INPUT_OUTPUT)
 		smp->method = JUST_WORKS;
 
-	/* If Just Works, Continue with Zero TK */
+	/* If Just Works, Continue with Zero TK and ask user-space for
+	 * confirmation */
 	if (smp->method == JUST_WORKS) {
-		set_bit(SMP_FLAG_TK_VALID, &smp->flags);
+		ret = mgmt_user_confirm_request(hcon->hdev, &hcon->dst,
+						hcon->type,
+						hcon->dst_type,
+						passkey, 1);
+		if (ret)
+			return ret;
+		set_bit(SMP_FLAG_WAIT_USER, &smp->flags);
 		return 0;
 	}
 
@@ -2194,7 +2201,7 @@ static u8 smp_cmd_pairing_random(struct l2cap_conn *conn, struct sk_buff *skb)
 	if (err)
 		return SMP_UNSPECIFIED;
 
-	if (smp->method == JUST_WORKS || smp->method == REQ_OOB) {
+	if (smp->method == REQ_OOB) {
 		if (hcon->out) {
 			sc_dhkey_check(smp);
 			SMP_ALLOW_CMD(smp, SMP_CMD_DHKEY_CHECK);
@@ -2209,6 +2216,9 @@ static u8 smp_cmd_pairing_random(struct l2cap_conn *conn, struct sk_buff *skb)
 	confirm_hint = 0;
 
 confirm:
+	if (smp->method == JUST_WORKS)
+		confirm_hint = 1;
+
 	err = mgmt_user_confirm_request(hcon->hdev, &hcon->dst, hcon->type,
 					hcon->dst_type, passkey, confirm_hint);
 	if (err)
@@ -2385,12 +2395,17 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
 			authreq |= SMP_AUTH_CT2;
 	}
 
-	/* Require MITM if IO Capability allows or the security level
-	 * requires it.
+	/* Don't attempt to set MITM if setting is overridden by debugfs
+	 * Needed to pass certification test SM/MAS/PKE/BV-01-C
 	 */
-	if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT ||
-	    hcon->pending_sec_level > BT_SECURITY_MEDIUM)
-		authreq |= SMP_AUTH_MITM;
+	if (!hci_dev_test_flag(hcon->hdev, HCI_FORCE_NO_MITM)) {
+		/* Require MITM if IO Capability allows or the security level
+		 * requires it.
+		 */
+		if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT ||
+		    hcon->pending_sec_level > BT_SECURITY_MEDIUM)
+			authreq |= SMP_AUTH_MITM;
+	}
 
 	if (hcon->role == HCI_ROLE_MASTER) {
 		struct smp_cmd_pairing cp;
diff --git a/net/bridge/Kconfig b/net/bridge/Kconfig
index e4fb050e2078..51a6414145d2 100644
--- a/net/bridge/Kconfig
+++ b/net/bridge/Kconfig
@@ -61,3 +61,15 @@ config BRIDGE_VLAN_FILTERING
 	  Say N to exclude this support and reduce the binary size.
 
 	  If unsure, say Y.
+
+config BRIDGE_MRP
+	bool "MRP protocol"
+	depends on BRIDGE
+	default n
+	help
+	  If you say Y here, then the Ethernet bridge will be able to run MRP
+	  protocol to detect loops
+
+	  Say N to exclude this support and reduce the binary size.
+
+	  If unsure, say N.
diff --git a/net/bridge/Makefile b/net/bridge/Makefile
index 49da7ae6f077..ccb394236fbd 100644
--- a/net/bridge/Makefile
+++ b/net/bridge/Makefile
@@ -25,3 +25,5 @@ bridge-$(CONFIG_BRIDGE_VLAN_FILTERING) += br_vlan.o br_vlan_tunnel.o br_vlan_opt
 bridge-$(CONFIG_NET_SWITCHDEV) += br_switchdev.o
 
 obj-$(CONFIG_NETFILTER) += netfilter/
+
+bridge-$(CONFIG_BRIDGE_MRP)	+= br_mrp_switchdev.o br_mrp.o br_mrp_netlink.o
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 0e3dbc5f3c34..8ec1362588af 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -463,6 +463,9 @@ void br_dev_setup(struct net_device *dev)
 	spin_lock_init(&br->lock);
 	INIT_LIST_HEAD(&br->port_list);
 	INIT_HLIST_HEAD(&br->fdb_list);
+#if IS_ENABLED(CONFIG_BRIDGE_MRP)
+	INIT_LIST_HEAD(&br->mrp_list);
+#endif
 	spin_lock_init(&br->hash_lock);
 
 	br->bridge_id.prio[0] = 0x80;
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 4fe30b182ee7..ca685c0cdf95 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -333,6 +333,8 @@ static void del_nbp(struct net_bridge_port *p)
 	br_stp_disable_port(p);
 	spin_unlock_bh(&br->lock);
 
+	br_mrp_port_del(br, p);
+
 	br_ifinfo_notify(RTM_DELLINK, NULL, p);
 
 	list_del_rcu(&p->list);
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index fcc260840028..d5c34f36f0f4 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -342,6 +342,9 @@ rx_handler_result_t br_handle_frame(struct sk_buff **pskb)
 		}
 	}
 
+	if (unlikely(br_mrp_process(p, skb)))
+		return RX_HANDLER_PASS;
+
 forward:
 	switch (p->state) {
 	case BR_STATE_FORWARDING:
diff --git a/net/bridge/br_ioctl.c b/net/bridge/br_ioctl.c
index ae22d784b88a..5e71fc8b826f 100644
--- a/net/bridge/br_ioctl.c
+++ b/net/bridge/br_ioctl.c
@@ -242,8 +242,7 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		if (!ns_capable(dev_net(dev)->user_ns, CAP_NET_ADMIN))
 			return -EPERM;
 
-		br_stp_set_enabled(br, args[1]);
-		ret = 0;
+		ret = br_stp_set_enabled(br, args[1], NULL);
 		break;
 
 	case BRCTL_SET_BRIDGE_PRIORITY:
diff --git a/net/bridge/br_mrp.c b/net/bridge/br_mrp.c
new file mode 100644
index 000000000000..d7bc09de4c13
--- /dev/null
+++ b/net/bridge/br_mrp.c
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/mrp_bridge.h>
+#include "br_private_mrp.h"
+
+static const u8 mrp_test_dmac[ETH_ALEN] = { 0x1, 0x15, 0x4e, 0x0, 0x0, 0x1 };
+
+static struct net_bridge_port *br_mrp_get_port(struct net_bridge *br,
+					       u32 ifindex)
+{
+	struct net_bridge_port *res = NULL;
+	struct net_bridge_port *port;
+
+	list_for_each_entry(port, &br->port_list, list) {
+		if (port->dev->ifindex == ifindex) {
+			res = port;
+			break;
+		}
+	}
+
+	return res;
+}
+
+static struct br_mrp *br_mrp_find_id(struct net_bridge *br, u32 ring_id)
+{
+	struct br_mrp *res = NULL;
+	struct br_mrp *mrp;
+
+	list_for_each_entry_rcu(mrp, &br->mrp_list, list,
+				lockdep_rtnl_is_held()) {
+		if (mrp->ring_id == ring_id) {
+			res = mrp;
+			break;
+		}
+	}
+
+	return res;
+}
+
+static struct br_mrp *br_mrp_find_port(struct net_bridge *br,
+				       struct net_bridge_port *p)
+{
+	struct br_mrp *res = NULL;
+	struct br_mrp *mrp;
+
+	list_for_each_entry_rcu(mrp, &br->mrp_list, list,
+				lockdep_rtnl_is_held()) {
+		if (rcu_access_pointer(mrp->p_port) == p ||
+		    rcu_access_pointer(mrp->s_port) == p) {
+			res = mrp;
+			break;
+		}
+	}
+
+	return res;
+}
+
+static int br_mrp_next_seq(struct br_mrp *mrp)
+{
+	mrp->seq_id++;
+	return mrp->seq_id;
+}
+
+static struct sk_buff *br_mrp_skb_alloc(struct net_bridge_port *p,
+					const u8 *src, const u8 *dst)
+{
+	struct ethhdr *eth_hdr;
+	struct sk_buff *skb;
+	u16 *version;
+
+	skb = dev_alloc_skb(MRP_MAX_FRAME_LENGTH);
+	if (!skb)
+		return NULL;
+
+	skb->dev = p->dev;
+	skb->protocol = htons(ETH_P_MRP);
+	skb->priority = MRP_FRAME_PRIO;
+	skb_reserve(skb, sizeof(*eth_hdr));
+
+	eth_hdr = skb_push(skb, sizeof(*eth_hdr));
+	ether_addr_copy(eth_hdr->h_dest, dst);
+	ether_addr_copy(eth_hdr->h_source, src);
+	eth_hdr->h_proto = htons(ETH_P_MRP);
+
+	version = skb_put(skb, sizeof(*version));
+	*version = cpu_to_be16(MRP_VERSION);
+
+	return skb;
+}
+
+static void br_mrp_skb_tlv(struct sk_buff *skb,
+			   enum br_mrp_tlv_header_type type,
+			   u8 length)
+{
+	struct br_mrp_tlv_hdr *hdr;
+
+	hdr = skb_put(skb, sizeof(*hdr));
+	hdr->type = type;
+	hdr->length = length;
+}
+
+static void br_mrp_skb_common(struct sk_buff *skb, struct br_mrp *mrp)
+{
+	struct br_mrp_common_hdr *hdr;
+
+	br_mrp_skb_tlv(skb, BR_MRP_TLV_HEADER_COMMON, sizeof(*hdr));
+
+	hdr = skb_put(skb, sizeof(*hdr));
+	hdr->seq_id = cpu_to_be16(br_mrp_next_seq(mrp));
+	memset(hdr->domain, 0xff, MRP_DOMAIN_UUID_LENGTH);
+}
+
+static struct sk_buff *br_mrp_alloc_test_skb(struct br_mrp *mrp,
+					     struct net_bridge_port *p,
+					     enum br_mrp_port_role_type port_role)
+{
+	struct br_mrp_ring_test_hdr *hdr = NULL;
+	struct sk_buff *skb = NULL;
+
+	if (!p)
+		return NULL;
+
+	skb = br_mrp_skb_alloc(p, p->dev->dev_addr, mrp_test_dmac);
+	if (!skb)
+		return NULL;
+
+	br_mrp_skb_tlv(skb, BR_MRP_TLV_HEADER_RING_TEST, sizeof(*hdr));
+	hdr = skb_put(skb, sizeof(*hdr));
+
+	hdr->prio = cpu_to_be16(MRP_DEFAULT_PRIO);
+	ether_addr_copy(hdr->sa, p->br->dev->dev_addr);
+	hdr->port_role = cpu_to_be16(port_role);
+	hdr->state = cpu_to_be16(mrp->ring_state);
+	hdr->transitions = cpu_to_be16(mrp->ring_transitions);
+	hdr->timestamp = cpu_to_be32(jiffies_to_msecs(jiffies));
+
+	br_mrp_skb_common(skb, mrp);
+	br_mrp_skb_tlv(skb, BR_MRP_TLV_HEADER_END, 0x0);
+
+	return skb;
+}
+
+static void br_mrp_test_work_expired(struct work_struct *work)
+{
+	struct delayed_work *del_work = to_delayed_work(work);
+	struct br_mrp *mrp = container_of(del_work, struct br_mrp, test_work);
+	struct net_bridge_port *p;
+	bool notify_open = false;
+	struct sk_buff *skb;
+
+	if (time_before_eq(mrp->test_end, jiffies))
+		return;
+
+	if (mrp->test_count_miss < mrp->test_max_miss) {
+		mrp->test_count_miss++;
+	} else {
+		/* Notify that the ring is open only if the ring state is
+		 * closed, otherwise it would continue to notify at every
+		 * interval.
+		 */
+		if (mrp->ring_state == BR_MRP_RING_STATE_CLOSED)
+			notify_open = true;
+	}
+
+	rcu_read_lock();
+
+	p = rcu_dereference(mrp->p_port);
+	if (p) {
+		skb = br_mrp_alloc_test_skb(mrp, p, BR_MRP_PORT_ROLE_PRIMARY);
+		if (!skb)
+			goto out;
+
+		skb_reset_network_header(skb);
+		dev_queue_xmit(skb);
+
+		if (notify_open && !mrp->ring_role_offloaded)
+			br_mrp_port_open(p->dev, true);
+	}
+
+	p = rcu_dereference(mrp->s_port);
+	if (p) {
+		skb = br_mrp_alloc_test_skb(mrp, p, BR_MRP_PORT_ROLE_SECONDARY);
+		if (!skb)
+			goto out;
+
+		skb_reset_network_header(skb);
+		dev_queue_xmit(skb);
+
+		if (notify_open && !mrp->ring_role_offloaded)
+			br_mrp_port_open(p->dev, true);
+	}
+
+out:
+	rcu_read_unlock();
+
+	queue_delayed_work(system_wq, &mrp->test_work,
+			   usecs_to_jiffies(mrp->test_interval));
+}
+
+/* Deletes the MRP instance.
+ * note: called under rtnl_lock
+ */
+static void br_mrp_del_impl(struct net_bridge *br, struct br_mrp *mrp)
+{
+	struct net_bridge_port *p;
+
+	/* Stop sending MRP_Test frames */
+	cancel_delayed_work_sync(&mrp->test_work);
+	br_mrp_switchdev_send_ring_test(br, mrp, 0, 0, 0);
+
+	br_mrp_switchdev_del(br, mrp);
+
+	/* Reset the ports */
+	p = rtnl_dereference(mrp->p_port);
+	if (p) {
+		spin_lock_bh(&br->lock);
+		p->state = BR_STATE_FORWARDING;
+		p->flags &= ~BR_MRP_AWARE;
+		spin_unlock_bh(&br->lock);
+		br_mrp_port_switchdev_set_state(p, BR_STATE_FORWARDING);
+		rcu_assign_pointer(mrp->p_port, NULL);
+	}
+
+	p = rtnl_dereference(mrp->s_port);
+	if (p) {
+		spin_lock_bh(&br->lock);
+		p->state = BR_STATE_FORWARDING;
+		p->flags &= ~BR_MRP_AWARE;
+		spin_unlock_bh(&br->lock);
+		br_mrp_port_switchdev_set_state(p, BR_STATE_FORWARDING);
+		rcu_assign_pointer(mrp->s_port, NULL);
+	}
+
+	list_del_rcu(&mrp->list);
+	kfree_rcu(mrp, rcu);
+}
+
+/* Adds a new MRP instance.
+ * note: called under rtnl_lock
+ */
+int br_mrp_add(struct net_bridge *br, struct br_mrp_instance *instance)
+{
+	struct net_bridge_port *p;
+	struct br_mrp *mrp;
+	int err;
+
+	/* If the ring exists, it is not possible to create another one with the
+	 * same ring_id
+	 */
+	mrp = br_mrp_find_id(br, instance->ring_id);
+	if (mrp)
+		return -EINVAL;
+
+	if (!br_mrp_get_port(br, instance->p_ifindex) ||
+	    !br_mrp_get_port(br, instance->s_ifindex))
+		return -EINVAL;
+
+	mrp = kzalloc(sizeof(*mrp), GFP_KERNEL);
+	if (!mrp)
+		return -ENOMEM;
+
+	mrp->ring_id = instance->ring_id;
+
+	p = br_mrp_get_port(br, instance->p_ifindex);
+	spin_lock_bh(&br->lock);
+	p->state = BR_STATE_FORWARDING;
+	p->flags |= BR_MRP_AWARE;
+	spin_unlock_bh(&br->lock);
+	rcu_assign_pointer(mrp->p_port, p);
+
+	p = br_mrp_get_port(br, instance->s_ifindex);
+	spin_lock_bh(&br->lock);
+	p->state = BR_STATE_FORWARDING;
+	p->flags |= BR_MRP_AWARE;
+	spin_unlock_bh(&br->lock);
+	rcu_assign_pointer(mrp->s_port, p);
+
+	INIT_DELAYED_WORK(&mrp->test_work, br_mrp_test_work_expired);
+	list_add_tail_rcu(&mrp->list, &br->mrp_list);
+
+	err = br_mrp_switchdev_add(br, mrp);
+	if (err)
+		goto delete_mrp;
+
+	return 0;
+
+delete_mrp:
+	br_mrp_del_impl(br, mrp);
+
+	return err;
+}
+
+/* Deletes the MRP instance from which the port is part of
+ * note: called under rtnl_lock
+ */
+void br_mrp_port_del(struct net_bridge *br, struct net_bridge_port *p)
+{
+	struct br_mrp *mrp = br_mrp_find_port(br, p);
+
+	/* If the port is not part of a MRP instance just bail out */
+	if (!mrp)
+		return;
+
+	br_mrp_del_impl(br, mrp);
+}
+
+/* Deletes existing MRP instance based on ring_id
+ * note: called under rtnl_lock
+ */
+int br_mrp_del(struct net_bridge *br, struct br_mrp_instance *instance)
+{
+	struct br_mrp *mrp = br_mrp_find_id(br, instance->ring_id);
+
+	if (!mrp)
+		return -EINVAL;
+
+	br_mrp_del_impl(br, mrp);
+
+	return 0;
+}
+
+/* Set port state, port state can be forwarding, blocked or disabled
+ * note: already called with rtnl_lock
+ */
+int br_mrp_set_port_state(struct net_bridge_port *p,
+			  enum br_mrp_port_state_type state)
+{
+	if (!p || !(p->flags & BR_MRP_AWARE))
+		return -EINVAL;
+
+	spin_lock_bh(&p->br->lock);
+
+	if (state == BR_MRP_PORT_STATE_FORWARDING)
+		p->state = BR_STATE_FORWARDING;
+	else
+		p->state = BR_STATE_BLOCKING;
+
+	spin_unlock_bh(&p->br->lock);
+
+	br_mrp_port_switchdev_set_state(p, state);
+
+	return 0;
+}
+
+/* Set port role, port role can be primary or secondary
+ * note: already called with rtnl_lock
+ */
+int br_mrp_set_port_role(struct net_bridge_port *p,
+			 struct br_mrp_port_role *role)
+{
+	struct br_mrp *mrp;
+
+	if (!p || !(p->flags & BR_MRP_AWARE))
+		return -EINVAL;
+
+	mrp = br_mrp_find_id(p->br, role->ring_id);
+
+	if (!mrp)
+		return -EINVAL;
+
+	if (role->role == BR_MRP_PORT_ROLE_PRIMARY)
+		rcu_assign_pointer(mrp->p_port, p);
+	else
+		rcu_assign_pointer(mrp->s_port, p);
+
+	br_mrp_port_switchdev_set_role(p, role->role);
+
+	return 0;
+}
+
+/* Set ring state, ring state can be only Open or Closed
+ * note: already called with rtnl_lock
+ */
+int br_mrp_set_ring_state(struct net_bridge *br,
+			  struct br_mrp_ring_state *state)
+{
+	struct br_mrp *mrp = br_mrp_find_id(br, state->ring_id);
+
+	if (!mrp)
+		return -EINVAL;
+
+	if (mrp->ring_state == BR_MRP_RING_STATE_CLOSED &&
+	    state->ring_state != BR_MRP_RING_STATE_CLOSED)
+		mrp->ring_transitions++;
+
+	mrp->ring_state = state->ring_state;
+
+	br_mrp_switchdev_set_ring_state(br, mrp, state->ring_state);
+
+	return 0;
+}
+
+/* Set ring role, ring role can be only MRM(Media Redundancy Manager) or
+ * MRC(Media Redundancy Client).
+ * note: already called with rtnl_lock
+ */
+int br_mrp_set_ring_role(struct net_bridge *br,
+			 struct br_mrp_ring_role *role)
+{
+	struct br_mrp *mrp = br_mrp_find_id(br, role->ring_id);
+	int err;
+
+	if (!mrp)
+		return -EINVAL;
+
+	mrp->ring_role = role->ring_role;
+
+	/* If there is an error just bailed out */
+	err = br_mrp_switchdev_set_ring_role(br, mrp, role->ring_role);
+	if (err && err != -EOPNOTSUPP)
+		return err;
+
+	/* Now detect if the HW actually applied the role or not. If the HW
+	 * applied the role it means that the SW will not to do those operations
+	 * anymore. For example if the role ir MRM then the HW will notify the
+	 * SW when ring is open, but if the is not pushed to the HW the SW will
+	 * need to detect when the ring is open
+	 */
+	mrp->ring_role_offloaded = err == -EOPNOTSUPP ? 0 : 1;
+
+	return 0;
+}
+
+/* Start to generate MRP test frames, the frames are generated by HW and if it
+ * fails, they are generated by the SW.
+ * note: already called with rtnl_lock
+ */
+int br_mrp_start_test(struct net_bridge *br,
+		      struct br_mrp_start_test *test)
+{
+	struct br_mrp *mrp = br_mrp_find_id(br, test->ring_id);
+
+	if (!mrp)
+		return -EINVAL;
+
+	/* Try to push it to the HW and if it fails then continue to generate in
+	 * SW and if that also fails then return error
+	 */
+	if (!br_mrp_switchdev_send_ring_test(br, mrp, test->interval,
+					     test->max_miss, test->period))
+		return 0;
+
+	mrp->test_interval = test->interval;
+	mrp->test_end = jiffies + usecs_to_jiffies(test->period);
+	mrp->test_max_miss = test->max_miss;
+	mrp->test_count_miss = 0;
+	queue_delayed_work(system_wq, &mrp->test_work,
+			   usecs_to_jiffies(test->interval));
+
+	return 0;
+}
+
+/* Process only MRP Test frame. All the other MRP frames are processed by
+ * userspace application
+ * note: already called with rcu_read_lock
+ */
+static void br_mrp_mrm_process(struct br_mrp *mrp, struct net_bridge_port *port,
+			       struct sk_buff *skb)
+{
+	const struct br_mrp_tlv_hdr *hdr;
+	struct br_mrp_tlv_hdr _hdr;
+
+	/* Each MRP header starts with a version field which is 16 bits.
+	 * Therefore skip the version and get directly the TLV header.
+	 */
+	hdr = skb_header_pointer(skb, sizeof(uint16_t), sizeof(_hdr), &_hdr);
+	if (!hdr)
+		return;
+
+	if (hdr->type != BR_MRP_TLV_HEADER_RING_TEST)
+		return;
+
+	mrp->test_count_miss = 0;
+
+	/* Notify the userspace that the ring is closed only when the ring is
+	 * not closed
+	 */
+	if (mrp->ring_state != BR_MRP_RING_STATE_CLOSED)
+		br_mrp_port_open(port->dev, false);
+}
+
+/* This will just forward the frame to the other mrp ring port(MRC role) or will
+ * not do anything.
+ * note: already called with rcu_read_lock
+ */
+static int br_mrp_rcv(struct net_bridge_port *p,
+		      struct sk_buff *skb, struct net_device *dev)
+{
+	struct net_device *s_dev, *p_dev, *d_dev;
+	struct net_bridge_port *p_port, *s_port;
+	struct net_bridge *br;
+	struct sk_buff *nskb;
+	struct br_mrp *mrp;
+
+	/* If port is disabled don't accept any frames */
+	if (p->state == BR_STATE_DISABLED)
+		return 0;
+
+	br = p->br;
+	mrp =  br_mrp_find_port(br, p);
+	if (unlikely(!mrp))
+		return 0;
+
+	p_port = rcu_dereference(mrp->p_port);
+	if (!p_port)
+		return 0;
+
+	s_port = rcu_dereference(mrp->s_port);
+	if (!s_port)
+		return 0;
+
+	/* If the role is MRM then don't forward the frames */
+	if (mrp->ring_role == BR_MRP_RING_ROLE_MRM) {
+		br_mrp_mrm_process(mrp, p, skb);
+		return 1;
+	}
+
+	/* Clone the frame and forward it on the other MRP port */
+	nskb = skb_clone(skb, GFP_ATOMIC);
+	if (!nskb)
+		return 0;
+
+	p_dev = p_port->dev;
+	s_dev = s_port->dev;
+
+	if (p_dev == dev)
+		d_dev = s_dev;
+	else
+		d_dev = p_dev;
+
+	nskb->dev = d_dev;
+	skb_push(nskb, ETH_HLEN);
+	dev_queue_xmit(nskb);
+
+	return 1;
+}
+
+/* Check if the frame was received on a port that is part of MRP ring
+ * and if the frame has MRP eth. In that case process the frame otherwise do
+ * normal forwarding.
+ * note: already called with rcu_read_lock
+ */
+int br_mrp_process(struct net_bridge_port *p, struct sk_buff *skb)
+{
+	/* If there is no MRP instance do normal forwarding */
+	if (likely(!(p->flags & BR_MRP_AWARE)))
+		goto out;
+
+	if (unlikely(skb->protocol == htons(ETH_P_MRP)))
+		return br_mrp_rcv(p, skb, p->dev);
+
+out:
+	return 0;
+}
+
+bool br_mrp_enabled(struct net_bridge *br)
+{
+	return !list_empty(&br->mrp_list);
+}
diff --git a/net/bridge/br_mrp_netlink.c b/net/bridge/br_mrp_netlink.c
new file mode 100644
index 000000000000..503896638be0
--- /dev/null
+++ b/net/bridge/br_mrp_netlink.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <net/genetlink.h>
+
+#include <uapi/linux/mrp_bridge.h>
+#include "br_private.h"
+#include "br_private_mrp.h"
+
+static const struct nla_policy br_mrp_policy[IFLA_BRIDGE_MRP_MAX + 1] = {
+	[IFLA_BRIDGE_MRP_UNSPEC]	= { .type = NLA_REJECT },
+	[IFLA_BRIDGE_MRP_INSTANCE]	= { .type = NLA_EXACT_LEN,
+				    .len = sizeof(struct br_mrp_instance)},
+	[IFLA_BRIDGE_MRP_PORT_STATE]	= { .type = NLA_U32 },
+	[IFLA_BRIDGE_MRP_PORT_ROLE]	= { .type = NLA_EXACT_LEN,
+				    .len = sizeof(struct br_mrp_port_role)},
+	[IFLA_BRIDGE_MRP_RING_STATE]	= { .type = NLA_EXACT_LEN,
+				    .len = sizeof(struct br_mrp_ring_state)},
+	[IFLA_BRIDGE_MRP_RING_ROLE]	= { .type = NLA_EXACT_LEN,
+				    .len = sizeof(struct br_mrp_ring_role)},
+	[IFLA_BRIDGE_MRP_START_TEST]	= { .type = NLA_EXACT_LEN,
+				    .len = sizeof(struct br_mrp_start_test)},
+};
+
+int br_mrp_parse(struct net_bridge *br, struct net_bridge_port *p,
+		 struct nlattr *attr, int cmd, struct netlink_ext_ack *extack)
+{
+	struct nlattr *tb[IFLA_BRIDGE_MRP_MAX + 1];
+	int err;
+
+	if (br->stp_enabled != BR_NO_STP) {
+		NL_SET_ERR_MSG_MOD(extack, "MRP can't be enabled if STP is already enabled\n");
+		return -EINVAL;
+	}
+
+	err = nla_parse_nested(tb, IFLA_BRIDGE_MRP_MAX, attr,
+			       br_mrp_policy, extack);
+	if (err)
+		return err;
+
+	if (tb[IFLA_BRIDGE_MRP_INSTANCE]) {
+		struct br_mrp_instance *instance =
+			nla_data(tb[IFLA_BRIDGE_MRP_INSTANCE]);
+
+		if (cmd == RTM_SETLINK)
+			err = br_mrp_add(br, instance);
+		else
+			err = br_mrp_del(br, instance);
+		if (err)
+			return err;
+	}
+
+	if (tb[IFLA_BRIDGE_MRP_PORT_STATE]) {
+		enum br_mrp_port_state_type state =
+			nla_get_u32(tb[IFLA_BRIDGE_MRP_PORT_STATE]);
+
+		err = br_mrp_set_port_state(p, state);
+		if (err)
+			return err;
+	}
+
+	if (tb[IFLA_BRIDGE_MRP_PORT_ROLE]) {
+		struct br_mrp_port_role *role =
+			nla_data(tb[IFLA_BRIDGE_MRP_PORT_ROLE]);
+
+		err = br_mrp_set_port_role(p, role);
+		if (err)
+			return err;
+	}
+
+	if (tb[IFLA_BRIDGE_MRP_RING_STATE]) {
+		struct br_mrp_ring_state *state =
+			nla_data(tb[IFLA_BRIDGE_MRP_RING_STATE]);
+
+		err = br_mrp_set_ring_state(br, state);
+		if (err)
+			return err;
+	}
+
+	if (tb[IFLA_BRIDGE_MRP_RING_ROLE]) {
+		struct br_mrp_ring_role *role =
+			nla_data(tb[IFLA_BRIDGE_MRP_RING_ROLE]);
+
+		err = br_mrp_set_ring_role(br, role);
+		if (err)
+			return err;
+	}
+
+	if (tb[IFLA_BRIDGE_MRP_START_TEST]) {
+		struct br_mrp_start_test *test =
+			nla_data(tb[IFLA_BRIDGE_MRP_START_TEST]);
+
+		err = br_mrp_start_test(br, test);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+int br_mrp_port_open(struct net_device *dev, u8 loc)
+{
+	struct net_bridge_port *p;
+	int err = 0;
+
+	p = br_port_get_rcu(dev);
+	if (!p) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (loc)
+		p->flags |= BR_MRP_LOST_CONT;
+	else
+		p->flags &= ~BR_MRP_LOST_CONT;
+
+	br_ifinfo_notify(RTM_NEWLINK, NULL, p);
+
+out:
+	return err;
+}
diff --git a/net/bridge/br_mrp_switchdev.c b/net/bridge/br_mrp_switchdev.c
new file mode 100644
index 000000000000..51cb1d5a24b4
--- /dev/null
+++ b/net/bridge/br_mrp_switchdev.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <net/switchdev.h>
+
+#include "br_private_mrp.h"
+
+int br_mrp_switchdev_add(struct net_bridge *br, struct br_mrp *mrp)
+{
+	struct switchdev_obj_mrp mrp_obj = {
+		.obj.orig_dev = br->dev,
+		.obj.id = SWITCHDEV_OBJ_ID_MRP,
+		.p_port = rtnl_dereference(mrp->p_port)->dev,
+		.s_port = rtnl_dereference(mrp->s_port)->dev,
+		.ring_id = mrp->ring_id,
+	};
+	int err;
+
+	err = switchdev_port_obj_add(br->dev, &mrp_obj.obj, NULL);
+
+	if (err && err != -EOPNOTSUPP)
+		return err;
+
+	return 0;
+}
+
+int br_mrp_switchdev_del(struct net_bridge *br, struct br_mrp *mrp)
+{
+	struct switchdev_obj_mrp mrp_obj = {
+		.obj.orig_dev = br->dev,
+		.obj.id = SWITCHDEV_OBJ_ID_MRP,
+		.p_port = NULL,
+		.s_port = NULL,
+		.ring_id = mrp->ring_id,
+	};
+	int err;
+
+	err = switchdev_port_obj_del(br->dev, &mrp_obj.obj);
+
+	if (err && err != -EOPNOTSUPP)
+		return err;
+
+	return 0;
+}
+
+int br_mrp_switchdev_set_ring_role(struct net_bridge *br,
+				   struct br_mrp *mrp,
+				   enum br_mrp_ring_role_type role)
+{
+	struct switchdev_obj_ring_role_mrp mrp_role = {
+		.obj.orig_dev = br->dev,
+		.obj.id = SWITCHDEV_OBJ_ID_RING_ROLE_MRP,
+		.ring_role = role,
+		.ring_id = mrp->ring_id,
+	};
+	int err;
+
+	if (role == BR_MRP_RING_ROLE_DISABLED)
+		err = switchdev_port_obj_del(br->dev, &mrp_role.obj);
+	else
+		err = switchdev_port_obj_add(br->dev, &mrp_role.obj, NULL);
+
+	return err;
+}
+
+int br_mrp_switchdev_send_ring_test(struct net_bridge *br,
+				    struct br_mrp *mrp, u32 interval,
+				    u8 max_miss, u32 period)
+{
+	struct switchdev_obj_ring_test_mrp test = {
+		.obj.orig_dev = br->dev,
+		.obj.id = SWITCHDEV_OBJ_ID_RING_TEST_MRP,
+		.interval = interval,
+		.max_miss = max_miss,
+		.ring_id = mrp->ring_id,
+		.period = period,
+	};
+	int err;
+
+	if (interval == 0)
+		err = switchdev_port_obj_del(br->dev, &test.obj);
+	else
+		err = switchdev_port_obj_add(br->dev, &test.obj, NULL);
+
+	return err;
+}
+
+int br_mrp_switchdev_set_ring_state(struct net_bridge *br,
+				    struct br_mrp *mrp,
+				    enum br_mrp_ring_state_type state)
+{
+	struct switchdev_obj_ring_state_mrp mrp_state = {
+		.obj.orig_dev = br->dev,
+		.obj.id = SWITCHDEV_OBJ_ID_RING_STATE_MRP,
+		.ring_state = state,
+		.ring_id = mrp->ring_id,
+	};
+	int err;
+
+	err = switchdev_port_obj_add(br->dev, &mrp_state.obj, NULL);
+
+	if (err && err != -EOPNOTSUPP)
+		return err;
+
+	return 0;
+}
+
+int br_mrp_port_switchdev_set_state(struct net_bridge_port *p,
+				    enum br_mrp_port_state_type state)
+{
+	struct switchdev_attr attr = {
+		.orig_dev = p->dev,
+		.id = SWITCHDEV_ATTR_ID_MRP_PORT_STATE,
+		.u.mrp_port_state = state,
+	};
+	int err;
+
+	err = switchdev_port_attr_set(p->dev, &attr);
+	if (err && err != -EOPNOTSUPP)
+		br_warn(p->br, "error setting offload MRP state on port %u(%s)\n",
+			(unsigned int)p->port_no, p->dev->name);
+
+	return err;
+}
+
+int br_mrp_port_switchdev_set_role(struct net_bridge_port *p,
+				   enum br_mrp_port_role_type role)
+{
+	struct switchdev_attr attr = {
+		.orig_dev = p->dev,
+		.id = SWITCHDEV_ATTR_ID_MRP_PORT_ROLE,
+		.u.mrp_port_role = role,
+	};
+	int err;
+
+	err = switchdev_port_attr_set(p->dev, &attr);
+	if (err && err != -EOPNOTSUPP)
+		return err;
+
+	return 0;
+}
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 59980ecfc962..04c3f9a82650 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -1027,7 +1027,7 @@ int br_nf_hook_thresh(unsigned int hook, struct net *net,
 #ifdef CONFIG_SYSCTL
 static
 int brnf_sysctl_call_tables(struct ctl_table *ctl, int write,
-			    void __user *buffer, size_t *lenp, loff_t *ppos)
+			    void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 43dab4066f91..a774e19c41bb 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -151,6 +151,7 @@ static inline size_t br_port_info_size(void)
 		+ nla_total_size(sizeof(u8))	/* IFLA_BRPORT_MULTICAST_ROUTER */
 #endif
 		+ nla_total_size(sizeof(u16))	/* IFLA_BRPORT_GROUP_FWD_MASK */
+		+ nla_total_size(sizeof(u8))	/* IFLA_BRPORT_MRP_RING_OPEN */
 		+ 0;
 }
 
@@ -213,6 +214,8 @@ static int br_port_fill_attrs(struct sk_buff *skb,
 	    nla_put_u16(skb, IFLA_BRPORT_GROUP_FWD_MASK, p->group_fwd_mask) ||
 	    nla_put_u8(skb, IFLA_BRPORT_NEIGH_SUPPRESS,
 		       !!(p->flags & BR_NEIGH_SUPPRESS)) ||
+	    nla_put_u8(skb, IFLA_BRPORT_MRP_RING_OPEN, !!(p->flags &
+							  BR_MRP_LOST_CONT)) ||
 	    nla_put_u8(skb, IFLA_BRPORT_ISOLATED, !!(p->flags & BR_ISOLATED)))
 		return -EMSGSIZE;
 
@@ -669,6 +672,11 @@ static int br_afspec(struct net_bridge *br,
 			if (err)
 				return err;
 			break;
+		case IFLA_BRIDGE_MRP:
+			err = br_mrp_parse(br, p, attr, cmd, extack);
+			if (err)
+				return err;
+			break;
 		}
 	}
 
@@ -1101,7 +1109,9 @@ static int br_changelink(struct net_device *brdev, struct nlattr *tb[],
 	if (data[IFLA_BR_STP_STATE]) {
 		u32 stp_enabled = nla_get_u32(data[IFLA_BR_STP_STATE]);
 
-		br_stp_set_enabled(br, stp_enabled);
+		err = br_stp_set_enabled(br, stp_enabled, extack);
+		if (err)
+			return err;
 	}
 
 	if (data[IFLA_BR_PRIORITY]) {
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 1f97703a52ff..c35647cb138a 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -428,6 +428,10 @@ struct net_bridge {
 	int offload_fwd_mark;
 #endif
 	struct hlist_head		fdb_list;
+
+#if IS_ENABLED(CONFIG_BRIDGE_MRP)
+	struct list_head		__rcu mrp_list;
+#endif
 };
 
 struct br_input_skb_cb {
@@ -1279,7 +1283,8 @@ int br_set_ageing_time(struct net_bridge *br, clock_t ageing_time);
 /* br_stp_if.c */
 void br_stp_enable_bridge(struct net_bridge *br);
 void br_stp_disable_bridge(struct net_bridge *br);
-void br_stp_set_enabled(struct net_bridge *br, unsigned long val);
+int br_stp_set_enabled(struct net_bridge *br, unsigned long val,
+		       struct netlink_ext_ack *extack);
 void br_stp_enable_port(struct net_bridge_port *p);
 void br_stp_disable_port(struct net_bridge_port *p);
 bool br_stp_recalculate_bridge_id(struct net_bridge *br);
@@ -1304,6 +1309,37 @@ unsigned long br_timer_value(const struct timer_list *timer);
 extern int (*br_fdb_test_addr_hook)(struct net_device *dev, unsigned char *addr);
 #endif
 
+/* br_mrp.c */
+#if IS_ENABLED(CONFIG_BRIDGE_MRP)
+int br_mrp_parse(struct net_bridge *br, struct net_bridge_port *p,
+		 struct nlattr *attr, int cmd, struct netlink_ext_ack *extack);
+int br_mrp_process(struct net_bridge_port *p, struct sk_buff *skb);
+bool br_mrp_enabled(struct net_bridge *br);
+void br_mrp_port_del(struct net_bridge *br, struct net_bridge_port *p);
+#else
+static inline int br_mrp_parse(struct net_bridge *br, struct net_bridge_port *p,
+			       struct nlattr *attr, int cmd,
+			       struct netlink_ext_ack *extack)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int br_mrp_process(struct net_bridge_port *p, struct sk_buff *skb)
+{
+	return 0;
+}
+
+static inline bool br_mrp_enabled(struct net_bridge *br)
+{
+	return 0;
+}
+
+static inline void br_mrp_port_del(struct net_bridge *br,
+				   struct net_bridge_port *p)
+{
+}
+#endif
+
 /* br_netlink.c */
 extern struct rtnl_link_ops br_link_ops;
 int br_netlink_init(void);
diff --git a/net/bridge/br_private_mrp.h b/net/bridge/br_private_mrp.h
new file mode 100644
index 000000000000..2921a4b59f8e
--- /dev/null
+++ b/net/bridge/br_private_mrp.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _BR_PRIVATE_MRP_H_
+#define _BR_PRIVATE_MRP_H_
+
+#include "br_private.h"
+#include <uapi/linux/mrp_bridge.h>
+
+struct br_mrp {
+	/* list of mrp instances */
+	struct list_head		__rcu list;
+
+	struct net_bridge_port __rcu	*p_port;
+	struct net_bridge_port __rcu	*s_port;
+
+	u32				ring_id;
+
+	enum br_mrp_ring_role_type	ring_role;
+	u8				ring_role_offloaded;
+	enum br_mrp_ring_state_type	ring_state;
+	u32				ring_transitions;
+
+	struct delayed_work		test_work;
+	u32				test_interval;
+	unsigned long			test_end;
+	u32				test_count_miss;
+	u32				test_max_miss;
+
+	u32				seq_id;
+
+	struct rcu_head			rcu;
+};
+
+/* br_mrp.c */
+int br_mrp_add(struct net_bridge *br, struct br_mrp_instance *instance);
+int br_mrp_del(struct net_bridge *br, struct br_mrp_instance *instance);
+int br_mrp_set_port_state(struct net_bridge_port *p,
+			  enum br_mrp_port_state_type state);
+int br_mrp_set_port_role(struct net_bridge_port *p,
+			 struct br_mrp_port_role *role);
+int br_mrp_set_ring_state(struct net_bridge *br,
+			  struct br_mrp_ring_state *state);
+int br_mrp_set_ring_role(struct net_bridge *br, struct br_mrp_ring_role *role);
+int br_mrp_start_test(struct net_bridge *br, struct br_mrp_start_test *test);
+
+/* br_mrp_switchdev.c */
+int br_mrp_switchdev_add(struct net_bridge *br, struct br_mrp *mrp);
+int br_mrp_switchdev_del(struct net_bridge *br, struct br_mrp *mrp);
+int br_mrp_switchdev_set_ring_role(struct net_bridge *br, struct br_mrp *mrp,
+				   enum br_mrp_ring_role_type role);
+int br_mrp_switchdev_set_ring_state(struct net_bridge *br, struct br_mrp *mrp,
+				    enum br_mrp_ring_state_type state);
+int br_mrp_switchdev_send_ring_test(struct net_bridge *br, struct br_mrp *mrp,
+				    u32 interval, u8 max_miss, u32 period);
+int br_mrp_port_switchdev_set_state(struct net_bridge_port *p,
+				    enum br_mrp_port_state_type state);
+int br_mrp_port_switchdev_set_role(struct net_bridge_port *p,
+				   enum br_mrp_port_role_type role);
+
+/* br_mrp_netlink.c  */
+int br_mrp_port_open(struct net_device *dev, u8 loc);
+
+#endif /* _BR_PRIVATE_MRP_H */
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index 1f14b8455345..3e88be7aa269 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -36,6 +36,12 @@ void br_set_state(struct net_bridge_port *p, unsigned int state)
 	};
 	int err;
 
+	/* Don't change the state of the ports if they are driven by a different
+	 * protocol.
+	 */
+	if (p->flags & BR_MRP_AWARE)
+		return;
+
 	p->state = state;
 	err = switchdev_port_attr_set(p->dev, &attr);
 	if (err && err != -EOPNOTSUPP)
diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index d174d3a566aa..a42850b7eb9a 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -196,10 +196,17 @@ static void br_stp_stop(struct net_bridge *br)
 	br->stp_enabled = BR_NO_STP;
 }
 
-void br_stp_set_enabled(struct net_bridge *br, unsigned long val)
+int br_stp_set_enabled(struct net_bridge *br, unsigned long val,
+		       struct netlink_ext_ack *extack)
 {
 	ASSERT_RTNL();
 
+	if (br_mrp_enabled(br)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "STP can't be enabled if MRP is already enabled\n");
+		return -EINVAL;
+	}
+
 	if (val) {
 		if (br->stp_enabled == BR_NO_STP)
 			br_stp_start(br);
@@ -207,6 +214,8 @@ void br_stp_set_enabled(struct net_bridge *br, unsigned long val)
 		if (br->stp_enabled != BR_NO_STP)
 			br_stp_stop(br);
 	}
+
+	return 0;
 }
 
 /* called under bridge lock */
diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c
index 9ab0f00b1081..7db06e3f642a 100644
--- a/net/bridge/br_sysfs_br.c
+++ b/net/bridge/br_sysfs_br.c
@@ -126,9 +126,7 @@ static ssize_t stp_state_show(struct device *d,
 
 static int set_stp_state(struct net_bridge *br, unsigned long val)
 {
-	br_stp_set_enabled(br, val);
-
-	return 0;
+	return br_stp_set_enabled(br, val, NULL);
 }
 
 static ssize_t stp_state_store(struct device *d,
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 78db58c7aec2..c83ffe912163 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1046,14 +1046,8 @@ static int do_replace_finish(struct net *net, struct ebt_replace *repl,
 	vfree(table);
 	vfree(counterstmp);
 
-#ifdef CONFIG_AUDIT
-	if (audit_enabled) {
-		audit_log(audit_context(), GFP_KERNEL,
-			  AUDIT_NETFILTER_CFG,
-			  "table=%s family=%u entries=%u",
-			  repl->name, AF_BRIDGE, repl->nentries);
-	}
-#endif
+	audit_log_nfcfg(repl->name, AF_BRIDGE, repl->nentries,
+			AUDIT_XT_OP_REPLACE);
 	return ret;
 
 free_unlock:
@@ -1095,16 +1089,14 @@ static int do_replace(struct net *net, const void __user *user,
 	tmp.name[sizeof(tmp.name) - 1] = 0;
 
 	countersize = COUNTER_OFFSET(tmp.nentries) * nr_cpu_ids;
-	newinfo = __vmalloc(sizeof(*newinfo) + countersize, GFP_KERNEL_ACCOUNT,
-			    PAGE_KERNEL);
+	newinfo = __vmalloc(sizeof(*newinfo) + countersize, GFP_KERNEL_ACCOUNT);
 	if (!newinfo)
 		return -ENOMEM;
 
 	if (countersize)
 		memset(newinfo->counters, 0, countersize);
 
-	newinfo->entries = __vmalloc(tmp.entries_size, GFP_KERNEL_ACCOUNT,
-				     PAGE_KERNEL);
+	newinfo->entries = __vmalloc(tmp.entries_size, GFP_KERNEL_ACCOUNT);
 	if (!newinfo->entries) {
 		ret = -ENOMEM;
 		goto free_newinfo;
@@ -1130,6 +1122,8 @@ static void __ebt_unregister_table(struct net *net, struct ebt_table *table)
 	mutex_lock(&ebt_mutex);
 	list_del(&table->list);
 	mutex_unlock(&ebt_mutex);
+	audit_log_nfcfg(table->name, AF_BRIDGE, table->private->nentries,
+			AUDIT_XT_OP_UNREGISTER);
 	EBT_ENTRY_ITERATE(table->private->entries, table->private->entries_size,
 			  ebt_cleanup_entry, net, NULL);
 	if (table->private->nentries)
@@ -1223,6 +1217,8 @@ int ebt_register_table(struct net *net, const struct ebt_table *input_table,
 		*res = NULL;
 	}
 
+	audit_log_nfcfg(repl->name, AF_BRIDGE, repl->nentries,
+			AUDIT_XT_OP_REGISTER);
 	return ret;
 free_unlock:
 	mutex_unlock(&ebt_mutex);
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index 195d2d67be8a..c10e5a55758d 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -142,7 +142,7 @@ static void caif_flow_cb(struct sk_buff *skb)
 
 	spin_lock_bh(&caifd->flow_lock);
 	send_xoff = caifd->xoff;
-	caifd->xoff = 0;
+	caifd->xoff = false;
 	dtor = caifd->xoff_skb_dtor;
 
 	if (WARN_ON(caifd->xoff_skb != skb))
@@ -220,7 +220,7 @@ static int transmit(struct cflayer *layer, struct cfpkt *pkt)
 	pr_debug("queue has stopped(%d) or is full (%d > %d)\n",
 			netif_queue_stopped(caifd->netdev),
 			qlen, high);
-	caifd->xoff = 1;
+	caifd->xoff = true;
 	caifd->xoff_skb = skb;
 	caifd->xoff_skb_dtor = skb->destructor;
 	skb->destructor = caif_flow_cb;
@@ -407,7 +407,7 @@ static int caif_device_notify(struct notifier_block *me, unsigned long what,
 			break;
 		}
 
-		caifd->xoff = 0;
+		caifd->xoff = false;
 		cfcnfg_set_phy_state(cfg, &caifd->layer, true);
 		rcu_read_unlock();
 
@@ -442,7 +442,7 @@ static int caif_device_notify(struct notifier_block *me, unsigned long what,
 		if (caifd->xoff_skb_dtor != NULL && caifd->xoff_skb != NULL)
 			caifd->xoff_skb->destructor = caifd->xoff_skb_dtor;
 
-		caifd->xoff = 0;
+		caifd->xoff = false;
 		caifd->xoff_skb_dtor = NULL;
 		caifd->xoff_skb = NULL;
 
diff --git a/net/ceph/Kconfig b/net/ceph/Kconfig
index 2e8e6f904920..d7bec7adc267 100644
--- a/net/ceph/Kconfig
+++ b/net/ceph/Kconfig
@@ -39,6 +39,6 @@ config CEPH_LIB_USE_DNS_RESOLVER
 	  be resolved using the CONFIG_DNS_RESOLVER facility.
 
 	  For information on how to use CONFIG_DNS_RESOLVER consult
-	  Documentation/networking/dns_resolver.txt
+	  Documentation/networking/dns_resolver.rst
 
 	  If unsure, say N.
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index a0e97f6c1072..66f22e8aa529 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -190,8 +190,7 @@ EXPORT_SYMBOL(ceph_compare_options);
  * kvmalloc() doesn't fall back to the vmalloc allocator unless flags are
  * compatible with (a superset of) GFP_KERNEL.  This is because while the
  * actual pages are allocated with the specified flags, the page table pages
- * are always allocated with GFP_KERNEL.  map_vm_area() doesn't even take
- * flags because GFP_KERNEL is hard-coded in {p4d,pud,pmd,pte}_alloc().
+ * are always allocated with GFP_KERNEL.
  *
  * ceph_kvmalloc() may be called with GFP_KERNEL, GFP_NOFS or GFP_NOIO.
  */
diff --git a/net/core/dev.c b/net/core/dev.c
index 522288177bbd..afff16849c26 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6227,7 +6227,8 @@ EXPORT_SYMBOL(__napi_schedule_irqoff);
 
 bool napi_complete_done(struct napi_struct *n, int work_done)
 {
-	unsigned long flags, val, new;
+	unsigned long flags, val, new, timeout = 0;
+	bool ret = true;
 
 	/*
 	 * 1) Don't let napi dequeue from the cpu poll list
@@ -6239,20 +6240,23 @@ bool napi_complete_done(struct napi_struct *n, int work_done)
 				 NAPIF_STATE_IN_BUSY_POLL)))
 		return false;
 
+	if (work_done) {
+		if (n->gro_bitmask)
+			timeout = READ_ONCE(n->dev->gro_flush_timeout);
+		n->defer_hard_irqs_count = READ_ONCE(n->dev->napi_defer_hard_irqs);
+	}
+	if (n->defer_hard_irqs_count > 0) {
+		n->defer_hard_irqs_count--;
+		timeout = READ_ONCE(n->dev->gro_flush_timeout);
+		if (timeout)
+			ret = false;
+	}
 	if (n->gro_bitmask) {
-		unsigned long timeout = 0;
-
-		if (work_done)
-			timeout = n->dev->gro_flush_timeout;
-
 		/* When the NAPI instance uses a timeout and keeps postponing
 		 * it, we need to bound somehow the time packets are kept in
 		 * the GRO layer
 		 */
 		napi_gro_flush(n, !!timeout);
-		if (timeout)
-			hrtimer_start(&n->timer, ns_to_ktime(timeout),
-				      HRTIMER_MODE_REL_PINNED);
 	}
 
 	gro_normal_list(n);
@@ -6284,7 +6288,10 @@ bool napi_complete_done(struct napi_struct *n, int work_done)
 		return false;
 	}
 
-	return true;
+	if (timeout)
+		hrtimer_start(&n->timer, ns_to_ktime(timeout),
+			      HRTIMER_MODE_REL_PINNED);
+	return ret;
 }
 EXPORT_SYMBOL(napi_complete_done);
 
@@ -6464,7 +6471,7 @@ static enum hrtimer_restart napi_watchdog(struct hrtimer *timer)
 	/* Note : we use a relaxed variant of napi_schedule_prep() not setting
 	 * NAPI_STATE_MISSED, since we do not react to a device IRQ.
 	 */
-	if (napi->gro_bitmask && !napi_disable_pending(napi) &&
+	if (!napi_disable_pending(napi) &&
 	    !test_and_set_bit(NAPI_STATE_SCHED, &napi->state))
 		__napi_schedule_irqoff(napi);
 
@@ -9136,6 +9143,11 @@ void netif_stacked_transfer_operstate(const struct net_device *rootdev,
 	else
 		netif_dormant_off(dev);
 
+	if (rootdev->operstate == IF_OPER_TESTING)
+		netif_testing_on(dev);
+	else
+		netif_testing_off(dev);
+
 	if (netif_carrier_ok(rootdev))
 		netif_carrier_on(dev);
 	else
diff --git a/net/core/filter.c b/net/core/filter.c
index 7d6ceaa54d21..70b32723e6be 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -256,17 +256,6 @@ BPF_CALL_2(bpf_skb_load_helper_32_no_cache, const struct sk_buff *, skb,
 					  offset);
 }
 
-BPF_CALL_0(bpf_get_raw_cpu_id)
-{
-	return raw_smp_processor_id();
-}
-
-static const struct bpf_func_proto bpf_get_raw_smp_processor_id_proto = {
-	.func		= bpf_get_raw_cpu_id,
-	.gpl_only	= false,
-	.ret_type	= RET_INTEGER,
-};
-
 static u32 convert_skb_access(int skb_field, int dst_reg, int src_reg,
 			      struct bpf_insn *insn_buf)
 {
@@ -4205,26 +4194,6 @@ static const struct bpf_func_proto bpf_get_socket_uid_proto = {
 	.arg1_type      = ARG_PTR_TO_CTX,
 };
 
-BPF_CALL_5(bpf_event_output_data, void *, ctx, struct bpf_map *, map, u64, flags,
-	   void *, data, u64, size)
-{
-	if (unlikely(flags & ~(BPF_F_INDEX_MASK)))
-		return -EINVAL;
-
-	return bpf_event_output(map, flags, data, size, NULL, 0, NULL);
-}
-
-static const struct bpf_func_proto bpf_event_output_data_proto =  {
-	.func		= bpf_event_output_data,
-	.gpl_only       = true,
-	.ret_type       = RET_INTEGER,
-	.arg1_type      = ARG_PTR_TO_CTX,
-	.arg2_type      = ARG_CONST_MAP_PTR,
-	.arg3_type      = ARG_ANYTHING,
-	.arg4_type      = ARG_PTR_TO_MEM,
-	.arg5_type      = ARG_CONST_SIZE_OR_ZERO,
-};
-
 BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 	   int, level, int, optname, char *, optval, int, optlen)
 {
@@ -5983,52 +5952,7 @@ bool bpf_helper_changes_pkt_data(void *func)
 	return false;
 }
 
-const struct bpf_func_proto *
-bpf_base_func_proto(enum bpf_func_id func_id)
-{
-	switch (func_id) {
-	case BPF_FUNC_map_lookup_elem:
-		return &bpf_map_lookup_elem_proto;
-	case BPF_FUNC_map_update_elem:
-		return &bpf_map_update_elem_proto;
-	case BPF_FUNC_map_delete_elem:
-		return &bpf_map_delete_elem_proto;
-	case BPF_FUNC_map_push_elem:
-		return &bpf_map_push_elem_proto;
-	case BPF_FUNC_map_pop_elem:
-		return &bpf_map_pop_elem_proto;
-	case BPF_FUNC_map_peek_elem:
-		return &bpf_map_peek_elem_proto;
-	case BPF_FUNC_get_prandom_u32:
-		return &bpf_get_prandom_u32_proto;
-	case BPF_FUNC_get_smp_processor_id:
-		return &bpf_get_raw_smp_processor_id_proto;
-	case BPF_FUNC_get_numa_node_id:
-		return &bpf_get_numa_node_id_proto;
-	case BPF_FUNC_tail_call:
-		return &bpf_tail_call_proto;
-	case BPF_FUNC_ktime_get_ns:
-		return &bpf_ktime_get_ns_proto;
-	default:
-		break;
-	}
-
-	if (!capable(CAP_SYS_ADMIN))
-		return NULL;
-
-	switch (func_id) {
-	case BPF_FUNC_spin_lock:
-		return &bpf_spin_lock_proto;
-	case BPF_FUNC_spin_unlock:
-		return &bpf_spin_unlock_proto;
-	case BPF_FUNC_trace_printk:
-		return bpf_get_trace_printk_proto();
-	case BPF_FUNC_jiffies64:
-		return &bpf_jiffies64_proto;
-	default:
-		return NULL;
-	}
-}
+const struct bpf_func_proto bpf_event_output_data_proto __weak;
 
 static const struct bpf_func_proto *
 sock_filter_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
@@ -6213,6 +6137,8 @@ tc_cls_act_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_skb_adjust_room_proto;
 	case BPF_FUNC_skb_change_tail:
 		return &bpf_skb_change_tail_proto;
+	case BPF_FUNC_skb_change_head:
+		return &bpf_skb_change_head_proto;
 	case BPF_FUNC_skb_get_tunnel_key:
 		return &bpf_skb_get_tunnel_key_proto;
 	case BPF_FUNC_skb_set_tunnel_key:
@@ -8786,6 +8712,10 @@ BPF_CALL_4(sk_select_reuseport, struct sk_reuseport_kern *, reuse_kern,
 
 	reuse = rcu_dereference(selected_sk->sk_reuseport_cb);
 	if (!reuse) {
+		/* Lookup in sock_map can return TCP ESTABLISHED sockets. */
+		if (sk_is_refcounted(selected_sk))
+			sock_put(selected_sk);
+
 		/* reuseport_array has only sk with non NULL sk_reuseport_cb.
 		 * The only (!reuse) case here is - the sk has already been
 		 * unhashed (e.g. by close()), so treat it as -ENOENT.
diff --git a/net/core/gen_stats.c b/net/core/gen_stats.c
index 1d653fbfcf52..e491b083b348 100644
--- a/net/core/gen_stats.c
+++ b/net/core/gen_stats.c
@@ -6,7 +6,7 @@
  *           Jamal Hadi Salim
  *           Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
  *
- * See Documentation/networking/gen_stats.txt
+ * See Documentation/networking/gen_stats.rst
  */
 
 #include <linux/types.h>
diff --git a/net/core/link_watch.c b/net/core/link_watch.c
index f153e0601838..75431ca9300f 100644
--- a/net/core/link_watch.c
+++ b/net/core/link_watch.c
@@ -34,6 +34,9 @@ static DEFINE_SPINLOCK(lweventlist_lock);
 
 static unsigned char default_operstate(const struct net_device *dev)
 {
+	if (netif_testing(dev))
+		return IF_OPER_TESTING;
+
 	if (!netif_carrier_ok(dev))
 		return (dev->ifindex != dev_get_iflink(dev) ?
 			IF_OPER_LOWERLAYERDOWN : IF_OPER_DOWN);
@@ -55,11 +58,15 @@ static void rfc2863_policy(struct net_device *dev)
 	write_lock_bh(&dev_base_lock);
 
 	switch(dev->link_mode) {
+	case IF_LINK_MODE_TESTING:
+		if (operstate == IF_OPER_UP)
+			operstate = IF_OPER_TESTING;
+		break;
+
 	case IF_LINK_MODE_DORMANT:
 		if (operstate == IF_OPER_UP)
 			operstate = IF_OPER_DORMANT;
 		break;
-
 	case IF_LINK_MODE_DEFAULT:
 	default:
 		break;
@@ -74,7 +81,8 @@ static void rfc2863_policy(struct net_device *dev)
 void linkwatch_init_dev(struct net_device *dev)
 {
 	/* Handle pre-registration link state changes */
-	if (!netif_carrier_ok(dev) || netif_dormant(dev))
+	if (!netif_carrier_ok(dev) || netif_dormant(dev) ||
+	    netif_testing(dev))
 		rfc2863_policy(dev);
 }
 
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 39d37d0ef575..3f2263e79e4b 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -3379,7 +3379,7 @@ EXPORT_SYMBOL(neigh_app_ns);
 static int unres_qlen_max = INT_MAX / SKB_TRUESIZE(ETH_FRAME_LEN);
 
 static int proc_unres_qlen(struct ctl_table *ctl, int write,
-			   void __user *buffer, size_t *lenp, loff_t *ppos)
+			   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int size, ret;
 	struct ctl_table tmp = *ctl;
@@ -3443,8 +3443,8 @@ static void neigh_proc_update(struct ctl_table *ctl, int write)
 }
 
 static int neigh_proc_dointvec_zero_intmax(struct ctl_table *ctl, int write,
-					   void __user *buffer,
-					   size_t *lenp, loff_t *ppos)
+					   void *buffer, size_t *lenp,
+					   loff_t *ppos)
 {
 	struct ctl_table tmp = *ctl;
 	int ret;
@@ -3457,8 +3457,8 @@ static int neigh_proc_dointvec_zero_intmax(struct ctl_table *ctl, int write,
 	return ret;
 }
 
-int neigh_proc_dointvec(struct ctl_table *ctl, int write,
-			void __user *buffer, size_t *lenp, loff_t *ppos)
+int neigh_proc_dointvec(struct ctl_table *ctl, int write, void *buffer,
+			size_t *lenp, loff_t *ppos)
 {
 	int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
 
@@ -3467,8 +3467,7 @@ int neigh_proc_dointvec(struct ctl_table *ctl, int write,
 }
 EXPORT_SYMBOL(neigh_proc_dointvec);
 
-int neigh_proc_dointvec_jiffies(struct ctl_table *ctl, int write,
-				void __user *buffer,
+int neigh_proc_dointvec_jiffies(struct ctl_table *ctl, int write, void *buffer,
 				size_t *lenp, loff_t *ppos)
 {
 	int ret = proc_dointvec_jiffies(ctl, write, buffer, lenp, ppos);
@@ -3479,8 +3478,8 @@ int neigh_proc_dointvec_jiffies(struct ctl_table *ctl, int write,
 EXPORT_SYMBOL(neigh_proc_dointvec_jiffies);
 
 static int neigh_proc_dointvec_userhz_jiffies(struct ctl_table *ctl, int write,
-					      void __user *buffer,
-					      size_t *lenp, loff_t *ppos)
+					      void *buffer, size_t *lenp,
+					      loff_t *ppos)
 {
 	int ret = proc_dointvec_userhz_jiffies(ctl, write, buffer, lenp, ppos);
 
@@ -3489,8 +3488,7 @@ static int neigh_proc_dointvec_userhz_jiffies(struct ctl_table *ctl, int write,
 }
 
 int neigh_proc_dointvec_ms_jiffies(struct ctl_table *ctl, int write,
-				   void __user *buffer,
-				   size_t *lenp, loff_t *ppos)
+				   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret = proc_dointvec_ms_jiffies(ctl, write, buffer, lenp, ppos);
 
@@ -3500,8 +3498,8 @@ int neigh_proc_dointvec_ms_jiffies(struct ctl_table *ctl, int write,
 EXPORT_SYMBOL(neigh_proc_dointvec_ms_jiffies);
 
 static int neigh_proc_dointvec_unres_qlen(struct ctl_table *ctl, int write,
-					  void __user *buffer,
-					  size_t *lenp, loff_t *ppos)
+					  void *buffer, size_t *lenp,
+					  loff_t *ppos)
 {
 	int ret = proc_unres_qlen(ctl, write, buffer, lenp, ppos);
 
@@ -3510,8 +3508,8 @@ static int neigh_proc_dointvec_unres_qlen(struct ctl_table *ctl, int write,
 }
 
 static int neigh_proc_base_reachable_time(struct ctl_table *ctl, int write,
-					  void __user *buffer,
-					  size_t *lenp, loff_t *ppos)
+					  void *buffer, size_t *lenp,
+					  loff_t *ppos)
 {
 	struct neigh_parms *p = ctl->extra2;
 	int ret;
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 4773ad6ec111..880e89c894f6 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -243,6 +243,18 @@ static ssize_t duplex_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(duplex);
 
+static ssize_t testing_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct net_device *netdev = to_net_dev(dev);
+
+	if (netif_running(netdev))
+		return sprintf(buf, fmt_dec, !!netif_testing(netdev));
+
+	return -EINVAL;
+}
+static DEVICE_ATTR_RO(testing);
+
 static ssize_t dormant_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
@@ -260,7 +272,7 @@ static const char *const operstates[] = {
 	"notpresent", /* currently unused */
 	"down",
 	"lowerlayerdown",
-	"testing", /* currently unused */
+	"testing",
 	"dormant",
 	"up"
 };
@@ -355,7 +367,7 @@ NETDEVICE_SHOW_RW(tx_queue_len, fmt_dec);
 
 static int change_gro_flush_timeout(struct net_device *dev, unsigned long val)
 {
-	dev->gro_flush_timeout = val;
+	WRITE_ONCE(dev->gro_flush_timeout, val);
 	return 0;
 }
 
@@ -370,6 +382,23 @@ static ssize_t gro_flush_timeout_store(struct device *dev,
 }
 NETDEVICE_SHOW_RW(gro_flush_timeout, fmt_ulong);
 
+static int change_napi_defer_hard_irqs(struct net_device *dev, unsigned long val)
+{
+	WRITE_ONCE(dev->napi_defer_hard_irqs, val);
+	return 0;
+}
+
+static ssize_t napi_defer_hard_irqs_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t len)
+{
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	return netdev_store(dev, attr, buf, len, change_napi_defer_hard_irqs);
+}
+NETDEVICE_SHOW_RW(napi_defer_hard_irqs, fmt_dec);
+
 static ssize_t ifalias_store(struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t len)
 {
@@ -524,6 +553,7 @@ static struct attribute *net_class_attrs[] __ro_after_init = {
 	&dev_attr_speed.attr,
 	&dev_attr_duplex.attr,
 	&dev_attr_dormant.attr,
+	&dev_attr_testing.attr,
 	&dev_attr_operstate.attr,
 	&dev_attr_carrier_changes.attr,
 	&dev_attr_ifalias.attr,
@@ -532,6 +562,7 @@ static struct attribute *net_class_attrs[] __ro_after_init = {
 	&dev_attr_flags.attr,
 	&dev_attr_tx_queue_len.attr,
 	&dev_attr_gro_flush_timeout.attr,
+	&dev_attr_napi_defer_hard_irqs.attr,
 	&dev_attr_phys_port_id.attr,
 	&dev_attr_phys_port_name.attr,
 	&dev_attr_phys_switch_id.attr,
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 849380a622ef..15b366a1a958 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -69,10 +69,11 @@ module_param(carrier_timeout, uint, 0644);
 #define np_notice(np, fmt, ...)				\
 	pr_notice("%s: " fmt, np->name, ##__VA_ARGS__)
 
-static int netpoll_start_xmit(struct sk_buff *skb, struct net_device *dev,
-			      struct netdev_queue *txq)
+static netdev_tx_t netpoll_start_xmit(struct sk_buff *skb,
+				      struct net_device *dev,
+				      struct netdev_queue *txq)
 {
-	int status = NETDEV_TX_OK;
+	netdev_tx_t status = NETDEV_TX_OK;
 	netdev_features_t features;
 
 	features = netif_skb_features(skb);
@@ -307,7 +308,7 @@ static int netpoll_owner_active(struct net_device *dev)
 void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb,
 			     struct net_device *dev)
 {
-	int status = NETDEV_TX_BUSY;
+	netdev_tx_t status = NETDEV_TX_BUSY;
 	unsigned long tries;
 	/* It is up to the caller to keep npinfo alive. */
 	struct netpoll_info *npinfo;
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 709ebbf8ab5b..2269199c5891 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -829,11 +829,18 @@ static void set_operstate(struct net_device *dev, unsigned char transition)
 	switch (transition) {
 	case IF_OPER_UP:
 		if ((operstate == IF_OPER_DORMANT ||
+		     operstate == IF_OPER_TESTING ||
 		     operstate == IF_OPER_UNKNOWN) &&
-		    !netif_dormant(dev))
+		    !netif_dormant(dev) && !netif_testing(dev))
 			operstate = IF_OPER_UP;
 		break;
 
+	case IF_OPER_TESTING:
+		if (operstate == IF_OPER_UP ||
+		    operstate == IF_OPER_UNKNOWN)
+			operstate = IF_OPER_TESTING;
+		break;
+
 	case IF_OPER_DORMANT:
 		if (operstate == IF_OPER_UP ||
 		    operstate == IF_OPER_UNKNOWN)
@@ -3990,8 +3997,8 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh,
 	struct ndmsg *ndm;
 	struct nlattr *tb[NDA_MAX+1];
 	struct net_device *dev;
-	int err = -EINVAL;
 	__u8 *addr;
+	int err;
 	u16 vid;
 
 	if (!netlink_capable(skb, CAP_NET_ADMIN))
diff --git a/net/core/sock.c b/net/core/sock.c
index 90509c37d291..494daa558cd6 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1883,7 +1883,7 @@ struct sock *sk_clone_lock(const struct sock *sk, const gfp_t priority)
 
 		/*
 		 * Before updating sk_refcnt, we must commit prior changes to memory
-		 * (Documentation/RCU/rculist_nulls.txt for details)
+		 * (Documentation/RCU/rculist_nulls.rst for details)
 		 */
 		smp_wmb();
 		refcount_set(&newsk->sk_refcnt, 2);
@@ -2364,7 +2364,6 @@ static void sk_leave_memory_pressure(struct sock *sk)
 	}
 }
 
-/* On 32bit arches, an skb frag is limited to 2^15 */
 #define SKB_FRAG_PAGE_ORDER	get_order(32768)
 DEFINE_STATIC_KEY_FALSE(net_high_order_alloc_disable_key);
 
@@ -2945,7 +2944,7 @@ void sock_init_data(struct socket *sock, struct sock *sk)
 	sk_rx_queue_clear(sk);
 	/*
 	 * Before updating sk_refcnt, we must commit prior changes to memory
-	 * (Documentation/RCU/rculist_nulls.txt for details)
+	 * (Documentation/RCU/rculist_nulls.rst for details)
 	 */
 	smp_wmb();
 	refcount_set(&sk->sk_refcnt, 1);
diff --git a/net/core/sock_map.c b/net/core/sock_map.c
index b08dfae10f88..00a26cf2cfe9 100644
--- a/net/core/sock_map.c
+++ b/net/core/sock_map.c
@@ -343,7 +343,14 @@ static struct sock *__sock_map_lookup_elem(struct bpf_map *map, u32 key)
 
 static void *sock_map_lookup(struct bpf_map *map, void *key)
 {
-	return __sock_map_lookup_elem(map, *(u32 *)key);
+	struct sock *sk;
+
+	sk = __sock_map_lookup_elem(map, *(u32 *)key);
+	if (!sk || !sk_fullsock(sk))
+		return NULL;
+	if (sk_is_refcounted(sk) && !refcount_inc_not_zero(&sk->sk_refcnt))
+		return NULL;
+	return sk;
 }
 
 static void *sock_map_lookup_sys(struct bpf_map *map, void *key)
@@ -1051,7 +1058,14 @@ static void *sock_hash_lookup_sys(struct bpf_map *map, void *key)
 
 static void *sock_hash_lookup(struct bpf_map *map, void *key)
 {
-	return __sock_hash_lookup_elem(map, key);
+	struct sock *sk;
+
+	sk = __sock_hash_lookup_elem(map, key);
+	if (!sk || !sk_fullsock(sk))
+		return NULL;
+	if (sk_is_refcounted(sk) && !refcount_inc_not_zero(&sk->sk_refcnt))
+		return NULL;
+	return sk;
 }
 
 static void sock_hash_release_progs(struct bpf_map *map)
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 9f9e00ba3ad7..0ddb13a6282b 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -45,7 +45,7 @@ EXPORT_SYMBOL(sysctl_devconf_inherit_init_net);
 
 #ifdef CONFIG_RPS
 static int rps_sock_flow_sysctl(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	unsigned int orig_size, size;
 	int ret, i;
@@ -115,8 +115,7 @@ static int rps_sock_flow_sysctl(struct ctl_table *table, int write,
 static DEFINE_MUTEX(flow_limit_update_mutex);
 
 static int flow_limit_cpu_sysctl(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp,
-				 loff_t *ppos)
+				 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct sd_flow_limit *cur;
 	struct softnet_data *sd;
@@ -180,10 +179,7 @@ static int flow_limit_cpu_sysctl(struct ctl_table *table, int write,
 		}
 		if (len < *lenp)
 			kbuf[len++] = '\n';
-		if (copy_to_user(buffer, kbuf, len)) {
-			ret = -EFAULT;
-			goto done;
-		}
+		memcpy(buffer, kbuf, len);
 		*lenp = len;
 		*ppos += len;
 	}
@@ -194,8 +190,7 @@ static int flow_limit_cpu_sysctl(struct ctl_table *table, int write,
 }
 
 static int flow_limit_table_len_sysctl(struct ctl_table *table, int write,
-				       void __user *buffer, size_t *lenp,
-				       loff_t *ppos)
+				       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	unsigned int old, *ptr;
 	int ret;
@@ -217,7 +212,7 @@ static int flow_limit_table_len_sysctl(struct ctl_table *table, int write,
 
 #ifdef CONFIG_NET_SCHED
 static int set_default_qdisc(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp, loff_t *ppos)
+			     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	char id[IFNAMSIZ];
 	struct ctl_table tbl = {
@@ -236,7 +231,7 @@ static int set_default_qdisc(struct ctl_table *table, int write,
 #endif
 
 static int proc_do_dev_weight(struct ctl_table *table, int write,
-			   void __user *buffer, size_t *lenp, loff_t *ppos)
+			   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 
@@ -251,7 +246,7 @@ static int proc_do_dev_weight(struct ctl_table *table, int write,
 }
 
 static int proc_do_rss_key(struct ctl_table *table, int write,
-			   void __user *buffer, size_t *lenp, loff_t *ppos)
+			   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table fake_table;
 	char buf[NETDEV_RSS_KEY_LEN * 3];
@@ -264,7 +259,7 @@ static int proc_do_rss_key(struct ctl_table *table, int write,
 
 #ifdef CONFIG_BPF_JIT
 static int proc_dointvec_minmax_bpf_enable(struct ctl_table *table, int write,
-					   void __user *buffer, size_t *lenp,
+					   void *buffer, size_t *lenp,
 					   loff_t *ppos)
 {
 	int ret, jit_enable = *(int *)table->data;
@@ -291,8 +286,7 @@ static int proc_dointvec_minmax_bpf_enable(struct ctl_table *table, int write,
 # ifdef CONFIG_HAVE_EBPF_JIT
 static int
 proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
-				    void __user *buffer, size_t *lenp,
-				    loff_t *ppos)
+				    void *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
@@ -303,8 +297,7 @@ proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
 
 static int
 proc_dolongvec_minmax_bpf_restricted(struct ctl_table *table, int write,
-				     void __user *buffer, size_t *lenp,
-				     loff_t *ppos)
+				     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index 9c3b27c257bb..7dce4f6c7025 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -108,11 +108,6 @@ extern int  sysctl_dccp_sync_ratelimit;
 #define ADD48(a, b)	 (((a) + (b)) & UINT48_MAX)
 #define SUB48(a, b)	 ADD48((a), COMPLEMENT48(b))
 
-static inline void dccp_set_seqno(u64 *seqno, u64 value)
-{
-	*seqno = value & UINT48_MAX;
-}
-
 static inline void dccp_inc_seqno(u64 *seqno)
 {
 	*seqno = ADD48(*seqno, 1);
diff --git a/net/decnet/Kconfig b/net/decnet/Kconfig
index 0935453ccfd5..8f98fb2f2ec9 100644
--- a/net/decnet/Kconfig
+++ b/net/decnet/Kconfig
@@ -15,7 +15,7 @@ config DECNET
 	  <http://linux-decnet.sourceforge.net/>.
 
 	  More detailed documentation is available in
-	  <file:Documentation/networking/decnet.txt>.
+	  <file:Documentation/networking/decnet.rst>.
 
 	  Be sure to say Y to "/proc file system support" and "Sysctl support"
 	  below when using DECnet, since you will need sysctl support to aid
@@ -40,4 +40,4 @@ config DECNET_ROUTER
 	  filtering" option will be required for the forthcoming routing daemon
 	  to work.
 
-	  See <file:Documentation/networking/decnet.txt> for more information.
+	  See <file:Documentation/networking/decnet.rst> for more information.
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index cca7ae712995..65abcf1b3210 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -160,8 +160,8 @@ static int max_t3[] = { 8191 }; /* Must fit in 16 bits when multiplied by BCT3MU
 static int min_priority[1];
 static int max_priority[] = { 127 }; /* From DECnet spec */
 
-static int dn_forwarding_proc(struct ctl_table *, int,
-			void __user *, size_t *, loff_t *);
+static int dn_forwarding_proc(struct ctl_table *, int, void *, size_t *,
+		loff_t *);
 static struct dn_dev_sysctl_table {
 	struct ctl_table_header *sysctl_header;
 	struct ctl_table dn_dev_vars[5];
@@ -245,8 +245,7 @@ static void dn_dev_sysctl_unregister(struct dn_dev_parms *parms)
 }
 
 static int dn_forwarding_proc(struct ctl_table *table, int write,
-				void __user *buffer,
-				size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 #ifdef CONFIG_DECNET_ROUTER
 	struct net_device *dev = table->extra1;
diff --git a/net/decnet/sysctl_net_decnet.c b/net/decnet/sysctl_net_decnet.c
index 55bf64a22b59..deae519bdeec 100644
--- a/net/decnet/sysctl_net_decnet.c
+++ b/net/decnet/sysctl_net_decnet.c
@@ -134,8 +134,7 @@ static int parse_addr(__le16 *addr, char *str)
 }
 
 static int dn_node_address_handler(struct ctl_table *table, int write,
-				void __user *buffer,
-				size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	char addr[DN_ASCBUF_LEN];
 	size_t len;
@@ -148,10 +147,7 @@ static int dn_node_address_handler(struct ctl_table *table, int write,
 
 	if (write) {
 		len = (*lenp < DN_ASCBUF_LEN) ? *lenp : (DN_ASCBUF_LEN-1);
-
-		if (copy_from_user(addr, buffer, len))
-			return -EFAULT;
-
+		memcpy(addr, buffer, len);
 		addr[len] = 0;
 		strip_it(addr);
 
@@ -173,11 +169,9 @@ static int dn_node_address_handler(struct ctl_table *table, int write,
 	len = strlen(addr);
 	addr[len++] = '\n';
 
-	if (len > *lenp) len = *lenp;
-
-	if (copy_to_user(buffer, addr, len))
-		return -EFAULT;
-
+	if (len > *lenp)
+		len = *lenp;
+	memcpy(buffer, addr, len);
 	*lenp = len;
 	*ppos += len;
 
@@ -185,8 +179,7 @@ static int dn_node_address_handler(struct ctl_table *table, int write,
 }
 
 static int dn_def_dev_handler(struct ctl_table *table, int write,
-				void __user *buffer,
-				size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	size_t len;
 	struct net_device *dev;
@@ -201,9 +194,7 @@ static int dn_def_dev_handler(struct ctl_table *table, int write,
 		if (*lenp > 16)
 			return -E2BIG;
 
-		if (copy_from_user(devname, buffer, *lenp))
-			return -EFAULT;
-
+		memcpy(devname, buffer, *lenp);
 		devname[*lenp] = 0;
 		strip_it(devname);
 
@@ -238,9 +229,7 @@ static int dn_def_dev_handler(struct ctl_table *table, int write,
 
 	if (len > *lenp) len = *lenp;
 
-	if (copy_to_user(buffer, devname, len))
-		return -EFAULT;
-
+	memcpy(buffer, devname, len);
 	*lenp = len;
 	*ppos += len;
 
diff --git a/net/dns_resolver/Kconfig b/net/dns_resolver/Kconfig
index 0a1c2238b4bd..255df9b6e9e8 100644
--- a/net/dns_resolver/Kconfig
+++ b/net/dns_resolver/Kconfig
@@ -19,7 +19,7 @@ config DNS_RESOLVER
 	  SMB2 later.  DNS Resolver is supported by the userspace upcall
 	  helper "/sbin/dns.resolver" via /etc/request-key.conf.
 
-	  See <file:Documentation/networking/dns_resolver.txt> for further
+	  See <file:Documentation/networking/dns_resolver.rst> for further
 	  information.
 
 	  To compile this as a module, choose M here: the module will be called
diff --git a/net/dns_resolver/dns_key.c b/net/dns_resolver/dns_key.c
index ad53eb31d40f..3aced951d5ab 100644
--- a/net/dns_resolver/dns_key.c
+++ b/net/dns_resolver/dns_key.c
@@ -1,6 +1,6 @@
 /* Key type used to cache DNS lookups made by the kernel
  *
- * See Documentation/networking/dns_resolver.txt
+ * See Documentation/networking/dns_resolver.rst
  *
  *   Copyright (c) 2007 Igor Mammedov
  *   Author(s): Igor Mammedov (niallain@gmail.com)
diff --git a/net/dns_resolver/dns_query.c b/net/dns_resolver/dns_query.c
index cab4e0df924f..82b084cc1cc6 100644
--- a/net/dns_resolver/dns_query.c
+++ b/net/dns_resolver/dns_query.c
@@ -1,7 +1,7 @@
 /* Upcall routine, designed to work as a key type and working through
  * /sbin/request-key to contact userspace when handling DNS queries.
  *
- * See Documentation/networking/dns_resolver.txt
+ * See Documentation/networking/dns_resolver.rst
  *
  *   Copyright (c) 2007 Igor Mammedov
  *   Author(s): Igor Mammedov (niallain@gmail.com)
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 92663dcb3aa2..739613070d07 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -9,6 +9,7 @@ menuconfig NET_DSA
 	tristate "Distributed Switch Architecture"
 	depends on HAVE_NET_DSA
 	depends on BRIDGE || BRIDGE=n
+	select GRO_CELLS
 	select NET_SWITCHDEV
 	select PHYLINK
 	select NET_DEVLINK
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index ee2610c4d46a..0384a911779e 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -234,7 +234,7 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
 	if (dsa_skb_defer_rx_timestamp(p, skb))
 		return 0;
 
-	netif_receive_skb(skb);
+	gro_cells_receive(&p->gcells, skb);
 
 	return 0;
 }
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 904cc7c9b882..6d9a1ef65fa0 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -11,6 +11,7 @@
 #include <linux/netdevice.h>
 #include <linux/netpoll.h>
 #include <net/dsa.h>
+#include <net/gro_cells.h>
 
 enum {
 	DSA_NOTIFIER_AGEING_TIME,
@@ -77,6 +78,8 @@ struct dsa_slave_priv {
 
 	struct pcpu_sw_netstats	*stats64;
 
+	struct gro_cells	gcells;
+
 	/* DSA port data, such as switch, port index, etc. */
 	struct dsa_port		*dp;
 
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index d1068803cd11..ba8bf90dc0cc 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1590,10 +1590,10 @@ void dsa_port_phylink_mac_change(struct dsa_switch *ds, int port, bool up)
 }
 EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_change);
 
-static void dsa_slave_phylink_fixed_state(struct net_device *dev,
+static void dsa_slave_phylink_fixed_state(struct phylink_config *config,
 					  struct phylink_link_state *state)
 {
-	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
 	struct dsa_switch *ds = dp->ds;
 
 	/* No need to check that this operation is valid, the callback would
@@ -1633,6 +1633,15 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
 	dp->pl_config.dev = &slave_dev->dev;
 	dp->pl_config.type = PHYLINK_NETDEV;
 
+	/* The get_fixed_state callback takes precedence over polling the
+	 * link GPIO in PHYLINK (see phylink_get_fixed_state).  Only set
+	 * this if the switch provides such a callback.
+	 */
+	if (ds->ops->phylink_fixed_state) {
+		dp->pl_config.get_fixed_state = dsa_slave_phylink_fixed_state;
+		dp->pl_config.poll_fixed_state = true;
+	}
+
 	dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn), mode,
 				&dsa_port_phylink_mac_ops);
 	if (IS_ERR(dp->pl)) {
@@ -1641,13 +1650,6 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
 		return PTR_ERR(dp->pl);
 	}
 
-	/* Register only if the switch provides such a callback, since this
-	 * callback takes precedence over polling the link GPIO in PHYLINK
-	 * (see phylink_get_fixed_state).
-	 */
-	if (ds->ops->phylink_fixed_state)
-		phylink_fixed_state_cb(dp->pl, dsa_slave_phylink_fixed_state);
-
 	if (ds->ops->get_phy_flags)
 		phy_flags = ds->ops->get_phy_flags(ds, dp->index);
 
@@ -1762,6 +1764,11 @@ int dsa_slave_create(struct dsa_port *port)
 		free_netdev(slave_dev);
 		return -ENOMEM;
 	}
+
+	ret = gro_cells_init(&p->gcells, slave_dev);
+	if (ret)
+		goto out_free;
+
 	p->dp = port;
 	INIT_LIST_HEAD(&p->mall_tc_list);
 	p->xmit = cpu_dp->tag_ops->xmit;
@@ -1779,7 +1786,7 @@ int dsa_slave_create(struct dsa_port *port)
 	ret = dsa_slave_phy_setup(slave_dev);
 	if (ret) {
 		netdev_err(master, "error %d setting up slave phy\n", ret);
-		goto out_free;
+		goto out_gcells;
 	}
 
 	dsa_slave_notify(slave_dev, DSA_PORT_REGISTER);
@@ -1798,6 +1805,8 @@ int dsa_slave_create(struct dsa_port *port)
 	phylink_disconnect_phy(p->dp->pl);
 	rtnl_unlock();
 	phylink_destroy(p->dp->pl);
+out_gcells:
+	gro_cells_destroy(&p->gcells);
 out_free:
 	free_percpu(p->stats64);
 	free_netdev(slave_dev);
@@ -1818,6 +1827,7 @@ void dsa_slave_destroy(struct net_device *slave_dev)
 	dsa_slave_notify(slave_dev, DSA_PORT_UNREGISTER);
 	unregister_netdev(slave_dev);
 	phylink_destroy(dp->pl);
+	gro_cells_destroy(&p->gcells);
 	free_percpu(p->stats64);
 	free_netdev(slave_dev);
 }
diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c
index 89d0b1827aaf..226d5ecdd567 100644
--- a/net/ethtool/ioctl.c
+++ b/net/ethtool/ioctl.c
@@ -17,7 +17,6 @@
 #include <linux/phy.h>
 #include <linux/bitops.h>
 #include <linux/uaccess.h>
-#include <linux/vermagic.h>
 #include <linux/vmalloc.h>
 #include <linux/sfp.h>
 #include <linux/slab.h>
@@ -28,7 +27,7 @@
 #include <net/xdp_sock.h>
 #include <net/flow_offload.h>
 #include <linux/ethtool_netlink.h>
-
+#include <generated/utsrelease.h>
 #include "common.h"
 
 /*
@@ -1746,7 +1745,9 @@ static int ethtool_self_test(struct net_device *dev, char __user *useraddr)
 	if (!data)
 		return -ENOMEM;
 
+	netif_testing_on(dev);
 	ops->self_test(dev, &test, data);
+	netif_testing_off(dev);
 
 	ret = -EFAULT;
 	if (copy_to_user(useraddr, &test, sizeof(test)))
diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c
index fc7027314ad8..cd99f548e440 100644
--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -125,13 +125,11 @@ int hsr_get_max_mtu(struct hsr_priv *hsr)
 static int hsr_dev_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct hsr_priv *hsr;
-	struct hsr_port *master;
 
 	hsr = netdev_priv(dev);
-	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
 
 	if (new_mtu > hsr_get_max_mtu(hsr)) {
-		netdev_info(master->dev, "A HSR master's MTU cannot be greater than the smallest MTU of its slaves minus the HSR Tag length (%d octets).\n",
+		netdev_info(dev, "A HSR master's MTU cannot be greater than the smallest MTU of its slaves minus the HSR Tag length (%d octets).\n",
 			    HSR_HLEN);
 		return -EINVAL;
 	}
diff --git a/net/hsr/hsr_main.h b/net/hsr/hsr_main.h
index 7321cf8d6d2c..f74193465bf5 100644
--- a/net/hsr/hsr_main.h
+++ b/net/hsr/hsr_main.h
@@ -62,15 +62,6 @@ struct hsr_tag {
  * with the path field in-between, which seems strange. I'm guessing the MAC
  * address definition is in error.
  */
-static inline u16 get_hsr_tag_path(struct hsr_tag *ht)
-{
-	return ntohs(ht->path_and_LSDU_size) >> 12;
-}
-
-static inline u16 get_hsr_tag_LSDU_size(struct hsr_tag *ht)
-{
-	return ntohs(ht->path_and_LSDU_size) & 0x0FFF;
-}
 
 static inline void set_hsr_tag_path(struct hsr_tag *ht, u16 path)
 {
@@ -103,16 +94,6 @@ struct hsr_sup_payload {
 	unsigned char	macaddress_A[ETH_ALEN];
 } __packed;
 
-static inline u16 get_hsr_stag_path(struct hsr_sup_tag *hst)
-{
-	return get_hsr_tag_path((struct hsr_tag *)hst);
-}
-
-static inline u16 get_hsr_stag_HSR_ver(struct hsr_sup_tag *hst)
-{
-	return get_hsr_tag_LSDU_size((struct hsr_tag *)hst);
-}
-
 static inline void set_hsr_stag_path(struct hsr_sup_tag *hst, u16 path)
 {
 	set_hsr_tag_path((struct hsr_tag *)hst, path);
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 25a8888826b8..23ba5045e3d3 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -49,7 +49,7 @@ config IP_ADVANCED_ROUTER
 
 	  Note that some distributions enable it in startup scripts.
 	  For details about rp_filter strict and loose mode read
-	  <file:Documentation/networking/ip-sysctl.txt>.
+	  <file:Documentation/networking/ip-sysctl.rst>.
 
 	  If unsure, say N here.
 
@@ -384,6 +384,7 @@ config INET_ESPINTCP
 	depends on XFRM && INET_ESP
 	select STREAM_PARSER
 	select NET_SOCK_MSG
+	select XFRM_ESPINTCP
 	help
 	  Support for RFC 8229 encapsulation of ESP and IKE over
 	  TCP/IPv4 sockets.
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index cf58e29cf746..6177c4ba0037 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1835,6 +1835,7 @@ static __net_init int inet_init_net(struct net *net)
 	net->ipv4.sysctl_ip_early_demux = 1;
 	net->ipv4.sysctl_udp_early_demux = 1;
 	net->ipv4.sysctl_tcp_early_demux = 1;
+	net->ipv4.sysctl_nexthop_compat_mode = 1;
 #ifdef CONFIG_SYSCTL
 	net->ipv4.sysctl_ip_prot_sock = PROT_SOCK;
 #endif
@@ -1914,7 +1915,7 @@ static int __init inet_init(void)
 {
 	struct inet_protosw *q;
 	struct list_head *r;
-	int rc = -EINVAL;
+	int rc;
 
 	sock_skb_cb_check_size(sizeof(struct inet_skb_parm));
 
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index c0dd561aa190..fc94f82f82c7 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -2366,8 +2366,7 @@ static int devinet_conf_ifindex(struct net *net, struct ipv4_devconf *cnf)
 }
 
 static int devinet_conf_proc(struct ctl_table *ctl, int write,
-			     void __user *buffer,
-			     size_t *lenp, loff_t *ppos)
+			     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int old_value = *(int *)ctl->data;
 	int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
@@ -2419,8 +2418,7 @@ static int devinet_conf_proc(struct ctl_table *ctl, int write,
 }
 
 static int devinet_sysctl_forward(struct ctl_table *ctl, int write,
-				  void __user *buffer,
-				  size_t *lenp, loff_t *ppos)
+				  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *valp = ctl->data;
 	int val = *valp;
@@ -2463,8 +2461,7 @@ static int devinet_sysctl_forward(struct ctl_table *ctl, int write,
 }
 
 static int ipv4_doint_and_flush(struct ctl_table *ctl, int write,
-				void __user *buffer,
-				size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *valp = ctl->data;
 	int val = *valp;
diff --git a/net/ipv4/esp4_offload.c b/net/ipv4/esp4_offload.c
index 731022cff600..9b1d451edae0 100644
--- a/net/ipv4/esp4_offload.c
+++ b/net/ipv4/esp4_offload.c
@@ -63,10 +63,8 @@ static struct sk_buff *esp4_gro_receive(struct list_head *head,
 		sp->olen++;
 
 		xo = xfrm_offload(skb);
-		if (!xo) {
-			xfrm_state_put(x);
+		if (!xo)
 			goto out_reset;
-		}
 	}
 
 	xo->flags |= XFRM_GRO;
@@ -139,7 +137,7 @@ static struct sk_buff *xfrm4_beet_gso_segment(struct xfrm_state *x,
 	struct xfrm_offload *xo = xfrm_offload(skb);
 	struct sk_buff *segs = ERR_PTR(-EINVAL);
 	const struct net_offload *ops;
-	int proto = xo->proto;
+	u8 proto = xo->proto;
 
 	skb->transport_header += x->props.header_len;
 
@@ -148,10 +146,15 @@ static struct sk_buff *xfrm4_beet_gso_segment(struct xfrm_state *x,
 
 		skb->transport_header += ph->hdrlen * 8;
 		proto = ph->nexthdr;
-	} else if (x->sel.family != AF_INET6) {
+	} else if (x->sel.family == AF_INET6) {
+		__be16 frag;
+
+		skb->transport_header +=
+			ipv6_skip_exthdr(skb, 0, &proto, &frag);
+		if (proto == IPPROTO_TCP)
+			skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4;
+	} else {
 		skb->transport_header -= IPV4_BEET_PHMAXLEN;
-	} else if (proto == IPPROTO_TCP) {
-		skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4;
 	}
 
 	__skb_pull(skb, skb_transport_offset(skb));
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 55ca2e521828..e53871e4a097 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -1780,6 +1780,8 @@ int fib_dump_info(struct sk_buff *skb, u32 portid, u32 seq, int event,
 			goto nla_put_failure;
 		if (nexthop_is_blackhole(fi->nh))
 			rtm->rtm_type = RTN_BLACKHOLE;
+		if (!fi->fib_net->ipv4.sysctl_nexthop_compat_mode)
+			goto offload;
 	}
 
 	if (nhs == 1) {
@@ -1805,6 +1807,7 @@ int fib_dump_info(struct sk_buff *skb, u32 portid, u32 seq, int event,
 			goto nla_put_failure;
 	}
 
+offload:
 	if (fri->offload)
 		rtm->rtm_flags |= RTM_F_OFFLOAD;
 	if (fri->trap)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index fc61f51d87a3..956a806649f7 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -853,7 +853,7 @@ static bool icmp_unreach(struct sk_buff *skb)
 		case ICMP_FRAG_NEEDED:
 			/* for documentation of the ip_no_pmtu_disc
 			 * values please see
-			 * Documentation/networking/ip-sysctl.txt
+			 * Documentation/networking/ip-sysctl.rst
 			 */
 			switch (net->ipv4.sysctl_ip_no_pmtu_disc) {
 			default:
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index 1b4e6f298648..1dda7c155c48 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -93,7 +93,28 @@ static int vti_rcv_proto(struct sk_buff *skb)
 
 static int vti_rcv_tunnel(struct sk_buff *skb)
 {
-	return vti_rcv(skb, ip_hdr(skb)->saddr, true);
+	struct ip_tunnel_net *itn = net_generic(dev_net(skb->dev), vti_net_id);
+	const struct iphdr *iph = ip_hdr(skb);
+	struct ip_tunnel *tunnel;
+
+	tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
+				  iph->saddr, iph->daddr, 0);
+	if (tunnel) {
+		struct tnl_ptk_info tpi = {
+			.proto = htons(ETH_P_IP),
+		};
+
+		if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+			goto drop;
+		if (iptunnel_pull_header(skb, 0, tpi.proto, false))
+			goto drop;
+		return ip_tunnel_rcv(tunnel, skb, &tpi, NULL, false);
+	}
+
+	return -EINVAL;
+drop:
+	kfree_skb(skb);
+	return 0;
 }
 
 static int vti_rcv_cb(struct sk_buff *skb, int err)
diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c
index fdfca534d094..3957364d556c 100644
--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -784,7 +784,8 @@ static void __remove_nexthop_fib(struct net *net, struct nexthop *nh)
 	list_for_each_entry_safe(f6i, tmp, &nh->f6i_list, nh_list) {
 		/* __ip6_del_rt does a release, so do a hold here */
 		fib6_info_hold(f6i);
-		ipv6_stub->ip6_del_rt(net, f6i);
+		ipv6_stub->ip6_del_rt(net, f6i,
+				      !net->ipv4.sysctl_nexthop_compat_mode);
 	}
 }
 
@@ -1041,7 +1042,7 @@ static int insert_nexthop(struct net *net, struct nexthop *new_nh,
 	if (!rc) {
 		nh_base_seq_inc(net);
 		nexthop_notify(RTM_NEWNEXTHOP, new_nh, &cfg->nlinfo);
-		if (replace_notify)
+		if (replace_notify && net->ipv4.sysctl_nexthop_compat_mode)
 			nexthop_replace_notify(net, new_nh, &cfg->nlinfo);
 	}
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 788c69d9bfe0..041f4dcac440 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -3336,8 +3336,7 @@ static int ip_rt_gc_elasticity __read_mostly	= 8;
 static int ip_min_valid_pmtu __read_mostly	= IPV4_MIN_MTU;
 
 static int ipv4_sysctl_rtcache_flush(struct ctl_table *__ctl, int write,
-					void __user *buffer,
-					size_t *lenp, loff_t *ppos)
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net = (struct net *)__ctl->extra1;
 
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 81b267e990a1..31a4a7813cda 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -71,8 +71,7 @@ static void set_local_port_range(struct net *net, int range[2])
 
 /* Validate changes from /proc interface. */
 static int ipv4_local_port_range(struct ctl_table *table, int write,
-				 void __user *buffer,
-				 size_t *lenp, loff_t *ppos)
+				 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net =
 		container_of(table->data, struct net, ipv4.ip_local_ports.range);
@@ -107,7 +106,7 @@ static int ipv4_local_port_range(struct ctl_table *table, int write,
 
 /* Validate changes from /proc interface. */
 static int ipv4_privileged_ports(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net = container_of(table->data, struct net,
 	    ipv4.sysctl_ip_prot_sock);
@@ -168,8 +167,7 @@ static void set_ping_group_range(struct ctl_table *table, kgid_t low, kgid_t hig
 
 /* Validate changes from /proc interface. */
 static int ipv4_ping_group_range(struct ctl_table *table, int write,
-				 void __user *buffer,
-				 size_t *lenp, loff_t *ppos)
+				 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct user_namespace *user_ns = current_user_ns();
 	int ret;
@@ -204,8 +202,7 @@ static int ipv4_ping_group_range(struct ctl_table *table, int write,
 }
 
 static int ipv4_fwd_update_priority(struct ctl_table *table, int write,
-				    void __user *buffer,
-				    size_t *lenp, loff_t *ppos)
+				    void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net;
 	int ret;
@@ -221,7 +218,7 @@ static int ipv4_fwd_update_priority(struct ctl_table *table, int write,
 }
 
 static int proc_tcp_congestion_control(struct ctl_table *ctl, int write,
-				       void __user *buffer, size_t *lenp, loff_t *ppos)
+				       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net = container_of(ctl->data, struct net,
 				       ipv4.tcp_congestion_control);
@@ -241,9 +238,8 @@ static int proc_tcp_congestion_control(struct ctl_table *ctl, int write,
 }
 
 static int proc_tcp_available_congestion_control(struct ctl_table *ctl,
-						 int write,
-						 void __user *buffer, size_t *lenp,
-						 loff_t *ppos)
+						 int write, void *buffer,
+						 size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table tbl = { .maxlen = TCP_CA_BUF_MAX, };
 	int ret;
@@ -258,9 +254,8 @@ static int proc_tcp_available_congestion_control(struct ctl_table *ctl,
 }
 
 static int proc_allowed_congestion_control(struct ctl_table *ctl,
-					   int write,
-					   void __user *buffer, size_t *lenp,
-					   loff_t *ppos)
+					   int write, void *buffer,
+					   size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table tbl = { .maxlen = TCP_CA_BUF_MAX };
 	int ret;
@@ -296,8 +291,7 @@ static int sscanf_key(char *buf, __le32 *key)
 }
 
 static int proc_tcp_fastopen_key(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp,
-				 loff_t *ppos)
+				 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net = container_of(table->data, struct net,
 	    ipv4.sysctl_tcp_fastopen);
@@ -399,7 +393,7 @@ static void proc_configure_early_demux(int enabled, int protocol)
 }
 
 static int proc_tcp_early_demux(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret = 0;
 
@@ -415,7 +409,7 @@ static int proc_tcp_early_demux(struct ctl_table *table, int write,
 }
 
 static int proc_udp_early_demux(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret = 0;
 
@@ -431,8 +425,7 @@ static int proc_udp_early_demux(struct ctl_table *table, int write,
 }
 
 static int proc_tfo_blackhole_detect_timeout(struct ctl_table *table,
-					     int write,
-					     void __user *buffer,
+					     int write, void *buffer,
 					     size_t *lenp, loff_t *ppos)
 {
 	struct net *net = container_of(table->data, struct net,
@@ -447,8 +440,7 @@ static int proc_tfo_blackhole_detect_timeout(struct ctl_table *table,
 }
 
 static int proc_tcp_available_ulp(struct ctl_table *ctl,
-				  int write,
-				  void __user *buffer, size_t *lenp,
+				  int write, void *buffer, size_t *lenp,
 				  loff_t *ppos)
 {
 	struct ctl_table tbl = { .maxlen = TCP_ULP_BUF_MAX, };
@@ -466,7 +458,7 @@ static int proc_tcp_available_ulp(struct ctl_table *ctl,
 
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
 static int proc_fib_multipath_hash_policy(struct ctl_table *table, int write,
-					  void __user *buffer, size_t *lenp,
+					  void *buffer, size_t *lenp,
 					  loff_t *ppos)
 {
 	struct net *net = container_of(table->data, struct net,
@@ -710,6 +702,15 @@ static struct ctl_table ipv4_net_table[] = {
 		.mode           = 0644,
 		.proc_handler   = proc_tcp_early_demux
 	},
+	{
+		.procname       = "nexthop_compat_mode",
+		.data           = &init_net.ipv4.sysctl_nexthop_compat_mode,
+		.maxlen         = sizeof(int),
+		.mode           = 0644,
+		.proc_handler   = proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
 	{
 		.procname	= "ip_default_ttl",
 		.data		= &init_net.ipv4.sysctl_ip_default_ttl,
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 6d87de434377..776df97ac683 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1734,14 +1734,48 @@ int tcp_mmap(struct file *file, struct socket *sock,
 }
 EXPORT_SYMBOL(tcp_mmap);
 
+static int tcp_zerocopy_vm_insert_batch(struct vm_area_struct *vma,
+					struct page **pages,
+					unsigned long pages_to_map,
+					unsigned long *insert_addr,
+					u32 *length_with_pending,
+					u32 *seq,
+					struct tcp_zerocopy_receive *zc)
+{
+	unsigned long pages_remaining = pages_to_map;
+	int bytes_mapped;
+	int ret;
+
+	ret = vm_insert_pages(vma, *insert_addr, pages, &pages_remaining);
+	bytes_mapped = PAGE_SIZE * (pages_to_map - pages_remaining);
+	/* Even if vm_insert_pages fails, it may have partially succeeded in
+	 * mapping (some but not all of the pages).
+	 */
+	*seq += bytes_mapped;
+	*insert_addr += bytes_mapped;
+	if (ret) {
+		/* But if vm_insert_pages did fail, we have to unroll some state
+		 * we speculatively touched before.
+		 */
+		const int bytes_not_mapped = PAGE_SIZE * pages_remaining;
+		*length_with_pending -= bytes_not_mapped;
+		zc->recv_skip_hint += bytes_not_mapped;
+	}
+	return ret;
+}
+
 static int tcp_zerocopy_receive(struct sock *sk,
 				struct tcp_zerocopy_receive *zc)
 {
 	unsigned long address = (unsigned long)zc->address;
 	u32 length = 0, seq, offset, zap_len;
+	#define PAGE_BATCH_SIZE 8
+	struct page *pages[PAGE_BATCH_SIZE];
 	const skb_frag_t *frags = NULL;
 	struct vm_area_struct *vma;
 	struct sk_buff *skb = NULL;
+	unsigned long pg_idx = 0;
+	unsigned long curr_addr;
 	struct tcp_sock *tp;
 	int inq;
 	int ret;
@@ -1754,6 +1788,8 @@ static int tcp_zerocopy_receive(struct sock *sk,
 
 	sock_rps_record_flow(sk);
 
+	tp = tcp_sk(sk);
+
 	down_read(&current->mm->mmap_sem);
 
 	ret = -EINVAL;
@@ -1762,7 +1798,6 @@ static int tcp_zerocopy_receive(struct sock *sk,
 		goto out;
 	zc->length = min_t(unsigned long, zc->length, vma->vm_end - address);
 
-	tp = tcp_sk(sk);
 	seq = tp->copied_seq;
 	inq = tcp_inq(sk);
 	zc->length = min_t(u32, zc->length, inq);
@@ -1774,8 +1809,20 @@ static int tcp_zerocopy_receive(struct sock *sk,
 		zc->recv_skip_hint = zc->length;
 	}
 	ret = 0;
+	curr_addr = address;
 	while (length + PAGE_SIZE <= zc->length) {
 		if (zc->recv_skip_hint < PAGE_SIZE) {
+			/* If we're here, finish the current batch. */
+			if (pg_idx) {
+				ret = tcp_zerocopy_vm_insert_batch(vma, pages,
+								   pg_idx,
+								   &curr_addr,
+								   &length,
+								   &seq, zc);
+				if (ret)
+					goto out;
+				pg_idx = 0;
+			}
 			if (skb) {
 				if (zc->recv_skip_hint > 0)
 					break;
@@ -1784,7 +1831,6 @@ static int tcp_zerocopy_receive(struct sock *sk,
 			} else {
 				skb = tcp_recv_skb(sk, seq, &offset);
 			}
-
 			zc->recv_skip_hint = skb->len - offset;
 			offset -= skb_headlen(skb);
 			if ((int)offset < 0 || skb_has_frag_list(skb))
@@ -1808,14 +1854,24 @@ static int tcp_zerocopy_receive(struct sock *sk,
 			zc->recv_skip_hint -= remaining;
 			break;
 		}
-		ret = vm_insert_page(vma, address + length,
-				     skb_frag_page(frags));
-		if (ret)
-			break;
+		pages[pg_idx] = skb_frag_page(frags);
+		pg_idx++;
 		length += PAGE_SIZE;
-		seq += PAGE_SIZE;
 		zc->recv_skip_hint -= PAGE_SIZE;
 		frags++;
+		if (pg_idx == PAGE_BATCH_SIZE) {
+			ret = tcp_zerocopy_vm_insert_batch(vma, pages, pg_idx,
+							   &curr_addr, &length,
+							   &seq, zc);
+			if (ret)
+				goto out;
+			pg_idx = 0;
+		}
+	}
+	if (pg_idx) {
+		ret = tcp_zerocopy_vm_insert_batch(vma, pages, pg_idx,
+						   &curr_addr, &length, &seq,
+						   zc);
 	}
 out:
 	up_read(&current->mm->mmap_sem);
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 5a05327f97c1..ff96466ea6da 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -262,14 +262,17 @@ static int tcp_bpf_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
 	struct sk_psock *psock;
 	int copied, ret;
 
+	if (unlikely(flags & MSG_ERRQUEUE))
+		return inet_recv_error(sk, msg, len, addr_len);
+
 	psock = sk_psock_get(sk);
 	if (unlikely(!psock))
 		return tcp_recvmsg(sk, msg, len, nonblock, flags, addr_len);
-	if (unlikely(flags & MSG_ERRQUEUE))
-		return inet_recv_error(sk, msg, len, addr_len);
 	if (!skb_queue_empty(&sk->sk_receive_queue) &&
-	    sk_psock_queue_empty(psock))
+	    sk_psock_queue_empty(psock)) {
+		sk_psock_put(sk, psock);
 		return tcp_recvmsg(sk, msg, len, nonblock, flags, addr_len);
+	}
 	lock_sock(sk);
 msg_bytes_ready:
 	copied = __tcp_bpf_recvmsg(sk, psock, msg, len, flags);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 2f45cde168c4..ba4482130f08 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2772,8 +2772,12 @@ u32 __tcp_select_window(struct sock *sk)
 	int mss = icsk->icsk_ack.rcv_mss;
 	int free_space = tcp_space(sk);
 	int allowed_space = tcp_full_space(sk);
-	int full_space = min_t(int, tp->window_clamp, allowed_space);
-	int window;
+	int full_space, window;
+
+	if (sk_is_mptcp(sk))
+		mptcp_space(sk, &free_space, &allowed_space);
+
+	full_space = min_t(int, tp->window_clamp, allowed_space);
 
 	if (unlikely(mss > full_space)) {
 		mss = full_space;
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 32564b350823..1b7ebbcae497 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -112,6 +112,9 @@
 #include <net/sock_reuseport.h>
 #include <net/addrconf.h>
 #include <net/udp_tunnel.h>
+#if IS_ENABLED(CONFIG_IPV6)
+#include <net/ipv6_stubs.h>
+#endif
 
 struct udp_table udp_table __read_mostly;
 EXPORT_SYMBOL(udp_table);
@@ -2563,7 +2566,12 @@ int udp_lib_setsockopt(struct sock *sk, int level, int optname,
 #ifdef CONFIG_XFRM
 		case UDP_ENCAP_ESPINUDP:
 		case UDP_ENCAP_ESPINUDP_NON_IKE:
-			up->encap_rcv = xfrm4_udp_encap_rcv;
+#if IS_ENABLED(CONFIG_IPV6)
+			if (sk->sk_family == AF_INET6)
+				up->encap_rcv = ipv6_stub->xfrm6_udp_encap_rcv;
+			else
+#endif
+				up->encap_rcv = xfrm4_udp_encap_rcv;
 #endif
 			fallthrough;
 		case UDP_ENCAP_L2TPINUDP:
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index 2ccaee98fddb..4f03aece2980 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -13,7 +13,7 @@ menuconfig IPV6
 	  For general information about IPv6, see
 	  <https://en.wikipedia.org/wiki/IPv6>.
 	  For specific information about IPv6 under Linux, see
-	  Documentation/networking/ipv6.txt and read the HOWTO at
+	  Documentation/networking/ipv6.rst and read the HOWTO at
 	  <http://www.tldp.org/HOWTO/Linux+IPv6-HOWTO/>
 
 	  To compile this protocol support as a module, choose M here: the
@@ -88,6 +88,18 @@ config INET6_ESP_OFFLOAD
 
 	  If unsure, say N.
 
+config INET6_ESPINTCP
+	bool "IPv6: ESP in TCP encapsulation (RFC 8229)"
+	depends on XFRM && INET6_ESP
+	select STREAM_PARSER
+	select NET_SOCK_MSG
+	select XFRM_ESPINTCP
+	help
+	  Support for RFC 8229 encapsulation of ESP and IKE over
+	  TCP/IPv6 sockets.
+
+	  If unsure, say N.
+
 config INET6_IPCOMP
 	tristate "IPv6: IPComp transformation"
 	select INET6_XFRM_TUNNEL
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 24e319dfb510..26e666fe9a0e 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1238,7 +1238,7 @@ cleanup_prefix_route(struct inet6_ifaddr *ifp, unsigned long expires,
 					ifp->idev->dev, 0, RTF_DEFAULT, true);
 	if (f6i) {
 		if (del_rt)
-			ip6_del_rt(dev_net(ifp->idev->dev), f6i);
+			ip6_del_rt(dev_net(ifp->idev->dev), f6i, false);
 		else {
 			if (!(f6i->fib6_flags & RTF_EXPIRES))
 				fib6_set_expires(f6i, expires);
@@ -2564,7 +2564,7 @@ int addrconf_prefix_rcv_add_addr(struct net *net, struct net_device *dev,
 				 __u32 valid_lft, u32 prefered_lft)
 {
 	struct inet6_ifaddr *ifp = ipv6_get_ifaddr(net, addr, dev, 1);
-	int create = 0, update_lft = 0;
+	int create = 0;
 
 	if (!ifp && valid_lft) {
 		int max_addresses = in6_dev->cnf.max_addresses;
@@ -2608,32 +2608,19 @@ int addrconf_prefix_rcv_add_addr(struct net *net, struct net_device *dev,
 		unsigned long now;
 		u32 stored_lft;
 
-		/* update lifetime (RFC2462 5.5.3 e) */
+		/* Update lifetime (RFC4862 5.5.3 e)
+		 * We deviate from RFC4862 by honoring all Valid Lifetimes to
+		 * improve the reaction of SLAAC to renumbering events
+		 * (draft-gont-6man-slaac-renum-06, Section 4.2)
+		 */
 		spin_lock_bh(&ifp->lock);
 		now = jiffies;
 		if (ifp->valid_lft > (now - ifp->tstamp) / HZ)
 			stored_lft = ifp->valid_lft - (now - ifp->tstamp) / HZ;
 		else
 			stored_lft = 0;
-		if (!create && stored_lft) {
-			const u32 minimum_lft = min_t(u32,
-				stored_lft, MIN_VALID_LIFETIME);
-			valid_lft = max(valid_lft, minimum_lft);
-
-			/* RFC4862 Section 5.5.3e:
-			 * "Note that the preferred lifetime of the
-			 *  corresponding address is always reset to
-			 *  the Preferred Lifetime in the received
-			 *  Prefix Information option, regardless of
-			 *  whether the valid lifetime is also reset or
-			 *  ignored."
-			 *
-			 * So we should always update prefered_lft here.
-			 */
-			update_lft = 1;
-		}
 
-		if (update_lft) {
+		if (!create && stored_lft) {
 			ifp->valid_lft = valid_lft;
 			ifp->prefered_lft = prefered_lft;
 			ifp->tstamp = now;
@@ -2731,7 +2718,7 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len, bool sllao)
 		if (rt) {
 			/* Autoconf prefix route */
 			if (valid_lft == 0) {
-				ip6_del_rt(net, rt);
+				ip6_del_rt(net, rt, false);
 				rt = NULL;
 			} else if (addrconf_finite_timeout(rt_expires)) {
 				/* not infinity */
@@ -3826,7 +3813,7 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 		spin_unlock_bh(&ifa->lock);
 
 		if (rt)
-			ip6_del_rt(net, rt);
+			ip6_del_rt(net, rt, false);
 
 		if (state != INET6_IFADDR_STATE_DEAD) {
 			__ipv6_ifa_notify(RTM_DELADDR, ifa);
@@ -4665,7 +4652,7 @@ static int modify_prefix_route(struct inet6_ifaddr *ifp,
 	prio = ifp->rt_priority ? : IP6_RT_PRIO_ADDRCONF;
 	if (f6i->fib6_metric != prio) {
 		/* delete old one */
-		ip6_del_rt(dev_net(ifp->idev->dev), f6i);
+		ip6_del_rt(dev_net(ifp->idev->dev), f6i, false);
 
 		/* add new one */
 		addrconf_prefix_route(modify_peer ? &ifp->peer_addr : &ifp->addr,
@@ -6086,10 +6073,10 @@ static void __ipv6_ifa_notify(int event, struct inet6_ifaddr *ifp)
 						       ifp->idev->dev, 0, 0,
 						       false);
 			if (rt)
-				ip6_del_rt(net, rt);
+				ip6_del_rt(net, rt, false);
 		}
 		if (ifp->rt) {
-			ip6_del_rt(net, ifp->rt);
+			ip6_del_rt(net, ifp->rt, false);
 			ifp->rt = NULL;
 		}
 		rt_genid_bump_ipv6(net);
@@ -6108,9 +6095,8 @@ static void ipv6_ifa_notify(int event, struct inet6_ifaddr *ifp)
 
 #ifdef CONFIG_SYSCTL
 
-static
-int addrconf_sysctl_forward(struct ctl_table *ctl, int write,
-			   void __user *buffer, size_t *lenp, loff_t *ppos)
+static int addrconf_sysctl_forward(struct ctl_table *ctl, int write,
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *valp = ctl->data;
 	int val = *valp;
@@ -6134,9 +6120,8 @@ int addrconf_sysctl_forward(struct ctl_table *ctl, int write,
 	return ret;
 }
 
-static
-int addrconf_sysctl_mtu(struct ctl_table *ctl, int write,
-			void __user *buffer, size_t *lenp, loff_t *ppos)
+static int addrconf_sysctl_mtu(struct ctl_table *ctl, int write,
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct inet6_dev *idev = ctl->extra1;
 	int min_mtu = IPV6_MIN_MTU;
@@ -6206,9 +6191,8 @@ static int addrconf_disable_ipv6(struct ctl_table *table, int *p, int newf)
 	return 0;
 }
 
-static
-int addrconf_sysctl_disable(struct ctl_table *ctl, int write,
-			    void __user *buffer, size_t *lenp, loff_t *ppos)
+static int addrconf_sysctl_disable(struct ctl_table *ctl, int write,
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *valp = ctl->data;
 	int val = *valp;
@@ -6232,9 +6216,8 @@ int addrconf_sysctl_disable(struct ctl_table *ctl, int write,
 	return ret;
 }
 
-static
-int addrconf_sysctl_proxy_ndp(struct ctl_table *ctl, int write,
-			      void __user *buffer, size_t *lenp, loff_t *ppos)
+static int addrconf_sysctl_proxy_ndp(struct ctl_table *ctl, int write,
+		void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *valp = ctl->data;
 	int ret;
@@ -6275,7 +6258,7 @@ int addrconf_sysctl_proxy_ndp(struct ctl_table *ctl, int write,
 }
 
 static int addrconf_sysctl_addr_gen_mode(struct ctl_table *ctl, int write,
-					 void __user *buffer, size_t *lenp,
+					 void *buffer, size_t *lenp,
 					 loff_t *ppos)
 {
 	int ret = 0;
@@ -6337,7 +6320,7 @@ static int addrconf_sysctl_addr_gen_mode(struct ctl_table *ctl, int write,
 }
 
 static int addrconf_sysctl_stable_secret(struct ctl_table *ctl, int write,
-					 void __user *buffer, size_t *lenp,
+					 void *buffer, size_t *lenp,
 					 loff_t *ppos)
 {
 	int err;
@@ -6404,8 +6387,7 @@ static int addrconf_sysctl_stable_secret(struct ctl_table *ctl, int write,
 
 static
 int addrconf_sysctl_ignore_routes_with_linkdown(struct ctl_table *ctl,
-						int write,
-						void __user *buffer,
+						int write, void *buffer,
 						size_t *lenp,
 						loff_t *ppos)
 {
@@ -6505,10 +6487,8 @@ int addrconf_disable_policy(struct ctl_table *ctl, int *valp, int val)
 	return 0;
 }
 
-static
-int addrconf_sysctl_disable_policy(struct ctl_table *ctl, int write,
-				   void __user *buffer, size_t *lenp,
-				   loff_t *ppos)
+static int addrconf_sysctl_disable_policy(struct ctl_table *ctl, int write,
+				   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *valp = ctl->data;
 	int val = *valp;
diff --git a/net/ipv6/addrconf_core.c b/net/ipv6/addrconf_core.c
index ea00ce3d4117..9ebf3fe0d2b1 100644
--- a/net/ipv6/addrconf_core.c
+++ b/net/ipv6/addrconf_core.c
@@ -185,7 +185,8 @@ static int eafnosupport_fib6_nh_init(struct net *net, struct fib6_nh *fib6_nh,
 	return -EAFNOSUPPORT;
 }
 
-static int eafnosupport_ip6_del_rt(struct net *net, struct fib6_info *rt)
+static int eafnosupport_ip6_del_rt(struct net *net, struct fib6_info *rt,
+				   bool skip_notify)
 {
 	return -EAFNOSUPPORT;
 }
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 345baa0a754f..cbbb00bad20e 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -60,6 +60,7 @@
 #include <net/calipso.h>
 #include <net/seg6.h>
 #include <net/rpl.h>
+#include <net/xfrm.h>
 
 #include <linux/uaccess.h>
 #include <linux/mroute6.h>
@@ -961,6 +962,10 @@ static const struct ipv6_stub ipv6_stub_impl = {
 	.ip6_del_rt	   = ip6_del_rt,
 	.udpv6_encap_enable = udpv6_encap_enable,
 	.ndisc_send_na = ndisc_send_na,
+#if IS_ENABLED(CONFIG_XFRM)
+	.xfrm6_udp_encap_rcv = xfrm6_udp_encap_rcv,
+	.xfrm6_rcv_encap = xfrm6_rcv_encap,
+#endif
 	.nd_tbl	= &nd_tbl,
 };
 
diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c
index 45e2adc56610..d88d97617f7e 100644
--- a/net/ipv6/ah6.c
+++ b/net/ipv6/ah6.c
@@ -767,6 +767,7 @@ static const struct xfrm_type ah6_type = {
 
 static struct xfrm6_protocol ah6_protocol = {
 	.handler	=	xfrm6_rcv,
+	.input_handler	=	xfrm_input,
 	.cb_handler	=	ah6_rcv_cb,
 	.err_handler	=	ah6_err,
 	.priority	=	0,
diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c
index fed91ab7ec46..893261230ffc 100644
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -364,7 +364,7 @@ int __ipv6_dev_ac_dec(struct inet6_dev *idev, const struct in6_addr *addr)
 	ipv6_del_acaddr_hash(aca);
 	addrconf_leave_solict(idev, &aca->aca_addr);
 
-	ip6_del_rt(dev_net(idev->dev), aca->aca_rt);
+	ip6_del_rt(dev_net(idev->dev), aca->aca_rt, false);
 
 	aca_put(aca);
 	return 0;
@@ -393,7 +393,7 @@ void ipv6_ac_destroy_dev(struct inet6_dev *idev)
 
 		addrconf_leave_solict(idev, &aca->aca_addr);
 
-		ip6_del_rt(dev_net(idev->dev), aca->aca_rt);
+		ip6_del_rt(dev_net(idev->dev), aca->aca_rt, false);
 
 		aca_put(aca);
 
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 11143d039f16..c43592771126 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -26,11 +26,16 @@
 #include <linux/random.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <net/ip6_checksum.h>
 #include <net/ip6_route.h>
 #include <net/icmp.h>
 #include <net/ipv6.h>
 #include <net/protocol.h>
+#include <net/udp.h>
 #include <linux/icmpv6.h>
+#include <net/tcp.h>
+#include <net/espintcp.h>
+#include <net/inet6_hashtables.h>
 
 #include <linux/highmem.h>
 
@@ -39,6 +44,11 @@ struct esp_skb_cb {
 	void *tmp;
 };
 
+struct esp_output_extra {
+	__be32 seqhi;
+	u32 esphoff;
+};
+
 #define ESP_SKB_CB(__skb) ((struct esp_skb_cb *)&((__skb)->cb[0]))
 
 /*
@@ -72,9 +82,9 @@ static void *esp_alloc_tmp(struct crypto_aead *aead, int nfrags, int seqihlen)
 	return kmalloc(len, GFP_ATOMIC);
 }
 
-static inline __be32 *esp_tmp_seqhi(void *tmp)
+static inline void *esp_tmp_extra(void *tmp)
 {
-	return PTR_ALIGN((__be32 *)tmp, __alignof__(__be32));
+	return PTR_ALIGN(tmp, __alignof__(struct esp_output_extra));
 }
 
 static inline u8 *esp_tmp_iv(struct crypto_aead *aead, void *tmp, int seqhilen)
@@ -104,16 +114,17 @@ static inline struct scatterlist *esp_req_sg(struct crypto_aead *aead,
 
 static void esp_ssg_unref(struct xfrm_state *x, void *tmp)
 {
+	struct esp_output_extra *extra = esp_tmp_extra(tmp);
 	struct crypto_aead *aead = x->data;
-	int seqhilen = 0;
+	int extralen = 0;
 	u8 *iv;
 	struct aead_request *req;
 	struct scatterlist *sg;
 
 	if (x->props.flags & XFRM_STATE_ESN)
-		seqhilen += sizeof(__be32);
+		extralen += sizeof(*extra);
 
-	iv = esp_tmp_iv(aead, tmp, seqhilen);
+	iv = esp_tmp_iv(aead, tmp, extralen);
 	req = esp_tmp_req(aead, iv);
 
 	/* Unref skb_frag_pages in the src scatterlist if necessary.
@@ -124,6 +135,149 @@ static void esp_ssg_unref(struct xfrm_state *x, void *tmp)
 			put_page(sg_page(sg));
 }
 
+#ifdef CONFIG_INET6_ESPINTCP
+struct esp_tcp_sk {
+	struct sock *sk;
+	struct rcu_head rcu;
+};
+
+static void esp_free_tcp_sk(struct rcu_head *head)
+{
+	struct esp_tcp_sk *esk = container_of(head, struct esp_tcp_sk, rcu);
+
+	sock_put(esk->sk);
+	kfree(esk);
+}
+
+static struct sock *esp6_find_tcp_sk(struct xfrm_state *x)
+{
+	struct xfrm_encap_tmpl *encap = x->encap;
+	struct esp_tcp_sk *esk;
+	__be16 sport, dport;
+	struct sock *nsk;
+	struct sock *sk;
+
+	sk = rcu_dereference(x->encap_sk);
+	if (sk && sk->sk_state == TCP_ESTABLISHED)
+		return sk;
+
+	spin_lock_bh(&x->lock);
+	sport = encap->encap_sport;
+	dport = encap->encap_dport;
+	nsk = rcu_dereference_protected(x->encap_sk,
+					lockdep_is_held(&x->lock));
+	if (sk && sk == nsk) {
+		esk = kmalloc(sizeof(*esk), GFP_ATOMIC);
+		if (!esk) {
+			spin_unlock_bh(&x->lock);
+			return ERR_PTR(-ENOMEM);
+		}
+		RCU_INIT_POINTER(x->encap_sk, NULL);
+		esk->sk = sk;
+		call_rcu(&esk->rcu, esp_free_tcp_sk);
+	}
+	spin_unlock_bh(&x->lock);
+
+	sk = __inet6_lookup_established(xs_net(x), &tcp_hashinfo, &x->id.daddr.in6,
+					dport, &x->props.saddr.in6, ntohs(sport), 0, 0);
+	if (!sk)
+		return ERR_PTR(-ENOENT);
+
+	if (!tcp_is_ulp_esp(sk)) {
+		sock_put(sk);
+		return ERR_PTR(-EINVAL);
+	}
+
+	spin_lock_bh(&x->lock);
+	nsk = rcu_dereference_protected(x->encap_sk,
+					lockdep_is_held(&x->lock));
+	if (encap->encap_sport != sport ||
+	    encap->encap_dport != dport) {
+		sock_put(sk);
+		sk = nsk ?: ERR_PTR(-EREMCHG);
+	} else if (sk == nsk) {
+		sock_put(sk);
+	} else {
+		rcu_assign_pointer(x->encap_sk, sk);
+	}
+	spin_unlock_bh(&x->lock);
+
+	return sk;
+}
+
+static int esp_output_tcp_finish(struct xfrm_state *x, struct sk_buff *skb)
+{
+	struct sock *sk;
+	int err;
+
+	rcu_read_lock();
+
+	sk = esp6_find_tcp_sk(x);
+	err = PTR_ERR_OR_ZERO(sk);
+	if (err)
+		goto out;
+
+	bh_lock_sock(sk);
+	if (sock_owned_by_user(sk))
+		err = espintcp_queue_out(sk, skb);
+	else
+		err = espintcp_push_skb(sk, skb);
+	bh_unlock_sock(sk);
+
+out:
+	rcu_read_unlock();
+	return err;
+}
+
+static int esp_output_tcp_encap_cb(struct net *net, struct sock *sk,
+				   struct sk_buff *skb)
+{
+	struct dst_entry *dst = skb_dst(skb);
+	struct xfrm_state *x = dst->xfrm;
+
+	return esp_output_tcp_finish(x, skb);
+}
+
+static int esp_output_tail_tcp(struct xfrm_state *x, struct sk_buff *skb)
+{
+	int err;
+
+	local_bh_disable();
+	err = xfrm_trans_queue_net(xs_net(x), skb, esp_output_tcp_encap_cb);
+	local_bh_enable();
+
+	/* EINPROGRESS just happens to do the right thing.  It
+	 * actually means that the skb has been consumed and
+	 * isn't coming back.
+	 */
+	return err ?: -EINPROGRESS;
+}
+#else
+static int esp_output_tail_tcp(struct xfrm_state *x, struct sk_buff *skb)
+{
+	kfree_skb(skb);
+
+	return -EOPNOTSUPP;
+}
+#endif
+
+static void esp_output_encap_csum(struct sk_buff *skb)
+{
+	/* UDP encap with IPv6 requires a valid checksum */
+	if (*skb_mac_header(skb) == IPPROTO_UDP) {
+		struct udphdr *uh = udp_hdr(skb);
+		struct ipv6hdr *ip6h = ipv6_hdr(skb);
+		int len = ntohs(uh->len);
+		unsigned int offset = skb_transport_offset(skb);
+		__wsum csum = skb_checksum(skb, offset, skb->len - offset, 0);
+
+		uh->check = csum_ipv6_magic(&ip6h->saddr, &ip6h->daddr,
+					    len, IPPROTO_UDP, csum);
+		if (uh->check == 0)
+			uh->check = CSUM_MANGLED_0;
+	}
+}
+
 static void esp_output_done(struct crypto_async_request *base, int err)
 {
 	struct sk_buff *skb = base->data;
@@ -143,6 +297,8 @@ static void esp_output_done(struct crypto_async_request *base, int err)
 	esp_ssg_unref(x, tmp);
 	kfree(tmp);
 
+	esp_output_encap_csum(skb);
+
 	if (xo && (xo->flags & XFRM_DEV_RESUME)) {
 		if (err) {
 			XFRM_INC_STATS(xs_net(x), LINUX_MIB_XFRMOUTSTATEPROTOERROR);
@@ -154,7 +310,11 @@ static void esp_output_done(struct crypto_async_request *base, int err)
 		secpath_reset(skb);
 		xfrm_dev_resume(skb);
 	} else {
-		xfrm_output_resume(skb, err);
+		if (!err &&
+		    x->encap && x->encap->encap_type == TCP_ENCAP_ESPINTCP)
+			esp_output_tail_tcp(x, skb);
+		else
+			xfrm_output_resume(skb, err);
 	}
 }
 
@@ -163,7 +323,7 @@ static void esp_restore_header(struct sk_buff *skb, unsigned int offset)
 {
 	struct ip_esp_hdr *esph = (void *)(skb->data + offset);
 	void *tmp = ESP_SKB_CB(skb)->tmp;
-	__be32 *seqhi = esp_tmp_seqhi(tmp);
+	__be32 *seqhi = esp_tmp_extra(tmp);
 
 	esph->seq_no = esph->spi;
 	esph->spi = *seqhi;
@@ -171,27 +331,36 @@ static void esp_restore_header(struct sk_buff *skb, unsigned int offset)
 
 static void esp_output_restore_header(struct sk_buff *skb)
 {
-	esp_restore_header(skb, skb_transport_offset(skb) - sizeof(__be32));
+	void *tmp = ESP_SKB_CB(skb)->tmp;
+	struct esp_output_extra *extra = esp_tmp_extra(tmp);
+
+	esp_restore_header(skb, skb_transport_offset(skb) + extra->esphoff -
+				sizeof(__be32));
 }
 
 static struct ip_esp_hdr *esp_output_set_esn(struct sk_buff *skb,
 					     struct xfrm_state *x,
 					     struct ip_esp_hdr *esph,
-					     __be32 *seqhi)
+					     struct esp_output_extra *extra)
 {
 	/* For ESN we move the header forward by 4 bytes to
 	 * accomodate the high bits.  We will move it back after
 	 * encryption.
 	 */
 	if ((x->props.flags & XFRM_STATE_ESN)) {
+		__u32 seqhi;
 		struct xfrm_offload *xo = xfrm_offload(skb);
 
-		esph = (void *)(skb_transport_header(skb) - sizeof(__be32));
-		*seqhi = esph->spi;
 		if (xo)
-			esph->seq_no = htonl(xo->seq.hi);
+			seqhi = xo->seq.hi;
 		else
-			esph->seq_no = htonl(XFRM_SKB_CB(skb)->seq.output.hi);
+			seqhi = XFRM_SKB_CB(skb)->seq.output.hi;
+
+		extra->esphoff = (unsigned char *)esph -
+				 skb_transport_header(skb);
+		esph = (struct ip_esp_hdr *)((unsigned char *)esph - 4);
+		extra->seqhi = esph->spi;
+		esph->seq_no = htonl(seqhi);
 	}
 
 	esph->spi = x->id.spi;
@@ -207,15 +376,122 @@ static void esp_output_done_esn(struct crypto_async_request *base, int err)
 	esp_output_done(base, err);
 }
 
+static struct ip_esp_hdr *esp6_output_udp_encap(struct sk_buff *skb,
+					       int encap_type,
+					       struct esp_info *esp,
+					       __be16 sport,
+					       __be16 dport)
+{
+	struct udphdr *uh;
+	__be32 *udpdata32;
+	unsigned int len;
+
+	len = skb->len + esp->tailen - skb_transport_offset(skb);
+	if (len > U16_MAX)
+		return ERR_PTR(-EMSGSIZE);
+
+	uh = (struct udphdr *)esp->esph;
+	uh->source = sport;
+	uh->dest = dport;
+	uh->len = htons(len);
+	uh->check = 0;
+
+	*skb_mac_header(skb) = IPPROTO_UDP;
+
+	if (encap_type == UDP_ENCAP_ESPINUDP_NON_IKE) {
+		udpdata32 = (__be32 *)(uh + 1);
+		udpdata32[0] = udpdata32[1] = 0;
+		return (struct ip_esp_hdr *)(udpdata32 + 2);
+	}
+
+	return (struct ip_esp_hdr *)(uh + 1);
+}
+
+#ifdef CONFIG_INET6_ESPINTCP
+static struct ip_esp_hdr *esp6_output_tcp_encap(struct xfrm_state *x,
+						struct sk_buff *skb,
+						struct esp_info *esp)
+{
+	__be16 *lenp = (void *)esp->esph;
+	struct ip_esp_hdr *esph;
+	unsigned int len;
+	struct sock *sk;
+
+	len = skb->len + esp->tailen - skb_transport_offset(skb);
+	if (len > IP_MAX_MTU)
+		return ERR_PTR(-EMSGSIZE);
+
+	rcu_read_lock();
+	sk = esp6_find_tcp_sk(x);
+	rcu_read_unlock();
+
+	if (IS_ERR(sk))
+		return ERR_CAST(sk);
+
+	*lenp = htons(len);
+	esph = (struct ip_esp_hdr *)(lenp + 1);
+
+	return esph;
+}
+#else
+static struct ip_esp_hdr *esp6_output_tcp_encap(struct xfrm_state *x,
+						struct sk_buff *skb,
+						struct esp_info *esp)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+#endif
+
+static int esp6_output_encap(struct xfrm_state *x, struct sk_buff *skb,
+			    struct esp_info *esp)
+{
+	struct xfrm_encap_tmpl *encap = x->encap;
+	struct ip_esp_hdr *esph;
+	__be16 sport, dport;
+	int encap_type;
+
+	spin_lock_bh(&x->lock);
+	sport = encap->encap_sport;
+	dport = encap->encap_dport;
+	encap_type = encap->encap_type;
+	spin_unlock_bh(&x->lock);
+
+	switch (encap_type) {
+	default:
+	case UDP_ENCAP_ESPINUDP:
+	case UDP_ENCAP_ESPINUDP_NON_IKE:
+		esph = esp6_output_udp_encap(skb, encap_type, esp, sport, dport);
+		break;
+	case TCP_ENCAP_ESPINTCP:
+		esph = esp6_output_tcp_encap(x, skb, esp);
+		break;
+	}
+
+	if (IS_ERR(esph))
+		return PTR_ERR(esph);
+
+	esp->esph = esph;
+
+	return 0;
+}
+
 int esp6_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info *esp)
 {
 	u8 *tail;
 	u8 *vaddr;
 	int nfrags;
+	int esph_offset;
 	struct page *page;
 	struct sk_buff *trailer;
 	int tailen = esp->tailen;
 
+	if (x->encap) {
+		int err = esp6_output_encap(x, skb, esp);
+
+		if (err < 0)
+			return err;
+	}
+
 	if (!skb_cloned(skb)) {
 		if (tailen <= skb_tailroom(skb)) {
 			nfrags = 1;
@@ -274,10 +550,13 @@ int esp6_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info
 	}
 
 cow:
+	esph_offset = (unsigned char *)esp->esph - skb_transport_header(skb);
+
 	nfrags = skb_cow_data(skb, tailen, &trailer);
 	if (nfrags < 0)
 		goto out;
 	tail = skb_tail_pointer(trailer);
+	esp->esph = (struct ip_esp_hdr *)(skb_transport_header(skb) + esph_offset);
 
 skip_cow:
 	esp_output_fill_trailer(tail, esp->tfclen, esp->plen, esp->proto);
@@ -295,20 +574,20 @@ int esp6_output_tail(struct xfrm_state *x, struct sk_buff *skb, struct esp_info
 	void *tmp;
 	int ivlen;
 	int assoclen;
-	int seqhilen;
-	__be32 *seqhi;
+	int extralen;
 	struct page *page;
 	struct ip_esp_hdr *esph;
 	struct aead_request *req;
 	struct crypto_aead *aead;
 	struct scatterlist *sg, *dsg;
+	struct esp_output_extra *extra;
 	int err = -ENOMEM;
 
 	assoclen = sizeof(struct ip_esp_hdr);
-	seqhilen = 0;
+	extralen = 0;
 
 	if (x->props.flags & XFRM_STATE_ESN) {
-		seqhilen += sizeof(__be32);
+		extralen += sizeof(*extra);
 		assoclen += sizeof(__be32);
 	}
 
@@ -316,12 +595,12 @@ int esp6_output_tail(struct xfrm_state *x, struct sk_buff *skb, struct esp_info
 	alen = crypto_aead_authsize(aead);
 	ivlen = crypto_aead_ivsize(aead);
 
-	tmp = esp_alloc_tmp(aead, esp->nfrags + 2, seqhilen);
+	tmp = esp_alloc_tmp(aead, esp->nfrags + 2, extralen);
 	if (!tmp)
 		goto error;
 
-	seqhi = esp_tmp_seqhi(tmp);
-	iv = esp_tmp_iv(aead, tmp, seqhilen);
+	extra = esp_tmp_extra(tmp);
+	iv = esp_tmp_iv(aead, tmp, extralen);
 	req = esp_tmp_req(aead, iv);
 	sg = esp_req_sg(aead, req);
 
@@ -330,7 +609,8 @@ int esp6_output_tail(struct xfrm_state *x, struct sk_buff *skb, struct esp_info
 	else
 		dsg = &sg[esp->nfrags];
 
-	esph = esp_output_set_esn(skb, x, ip_esp_hdr(skb), seqhi);
+	esph = esp_output_set_esn(skb, x, esp->esph, extra);
+	esp->esph = esph;
 
 	sg_init_table(sg, esp->nfrags);
 	err = skb_to_sgvec(skb, sg,
@@ -394,11 +674,15 @@ int esp6_output_tail(struct xfrm_state *x, struct sk_buff *skb, struct esp_info
 	case 0:
 		if ((x->props.flags & XFRM_STATE_ESN))
 			esp_output_restore_header(skb);
+		esp_output_encap_csum(skb);
 	}
 
 	if (sg != dsg)
 		esp_ssg_unref(x, tmp);
 
+	if (!err && x->encap && x->encap->encap_type == TCP_ENCAP_ESPINTCP)
+		err = esp_output_tail_tcp(x, skb);
+
 error_free:
 	kfree(tmp);
 error:
@@ -438,11 +722,13 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb)
 	esp.plen = esp.clen - skb->len - esp.tfclen;
 	esp.tailen = esp.tfclen + esp.plen + alen;
 
+	esp.esph = ip_esp_hdr(skb);
+
 	esp.nfrags = esp6_output_head(x, skb, &esp);
 	if (esp.nfrags < 0)
 		return esp.nfrags;
 
-	esph = ip_esp_hdr(skb);
+	esph = esp.esph;
 	esph->spi = x->id.spi;
 
 	esph->seq_no = htonl(XFRM_SKB_CB(skb)->seq.output.low);
@@ -517,6 +803,60 @@ int esp6_input_done2(struct sk_buff *skb, int err)
 	if (unlikely(err < 0))
 		goto out;
 
+	if (x->encap) {
+		const struct ipv6hdr *ip6h = ipv6_hdr(skb);
+		struct xfrm_encap_tmpl *encap = x->encap;
+		struct udphdr *uh = (void *)(skb_network_header(skb) + hdr_len);
+		struct tcphdr *th = (void *)(skb_network_header(skb) + hdr_len);
+		__be16 source;
+
+		switch (x->encap->encap_type) {
+		case TCP_ENCAP_ESPINTCP:
+			source = th->source;
+			break;
+		case UDP_ENCAP_ESPINUDP:
+		case UDP_ENCAP_ESPINUDP_NON_IKE:
+			source = uh->source;
+			break;
+		default:
+			WARN_ON_ONCE(1);
+			err = -EINVAL;
+			goto out;
+		}
+
+		/*
+		 * 1) if the NAT-T peer's IP or port changed then
+		 *    advertize the change to the keying daemon.
+		 *    This is an inbound SA, so just compare
+		 *    SRC ports.
+		 */
+		if (!ipv6_addr_equal(&ip6h->saddr, &x->props.saddr.in6) ||
+		    source != encap->encap_sport) {
+			xfrm_address_t ipaddr;
+
+			memcpy(&ipaddr.a6, &ip6h->saddr.s6_addr, sizeof(ipaddr.a6));
+			km_new_mapping(x, &ipaddr, source);
+
+			/* XXX: perhaps add an extra
+			 * policy check here, to see
+			 * if we should allow or
+			 * reject a packet from a
+			 * different source
+			 * address/port.
+			 */
+		}
+
+		/*
+		 * 2) ignore UDP/TCP checksums in case
+		 *    of NAT-T in Transport Mode, or
+		 *    perform other post-processing fixes
+		 *    as per draft-ietf-ipsec-udp-encaps-06,
+		 *    section 3.1.2
+		 */
+		if (x->props.mode == XFRM_MODE_TRANSPORT)
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+	}
+
 	skb_postpull_rcsum(skb, skb_network_header(skb),
 			   skb_network_header_len(skb));
 	skb_pull_rcsum(skb, hlen);
@@ -632,7 +972,7 @@ static int esp6_input(struct xfrm_state *x, struct sk_buff *skb)
 		goto out;
 
 	ESP_SKB_CB(skb)->tmp = tmp;
-	seqhi = esp_tmp_seqhi(tmp);
+	seqhi = esp_tmp_extra(tmp);
 	iv = esp_tmp_iv(aead, tmp, seqhilen);
 	req = esp_tmp_req(aead, iv);
 	sg = esp_req_sg(aead, req);
@@ -836,9 +1176,6 @@ static int esp6_init_state(struct xfrm_state *x)
 	u32 align;
 	int err;
 
-	if (x->encap)
-		return -EINVAL;
-
 	x->data = NULL;
 
 	if (x->aead)
@@ -867,6 +1204,30 @@ static int esp6_init_state(struct xfrm_state *x)
 		break;
 	}
 
+	if (x->encap) {
+		struct xfrm_encap_tmpl *encap = x->encap;
+
+		switch (encap->encap_type) {
+		default:
+			err = -EINVAL;
+			goto error;
+		case UDP_ENCAP_ESPINUDP:
+			x->props.header_len += sizeof(struct udphdr);
+			break;
+		case UDP_ENCAP_ESPINUDP_NON_IKE:
+			x->props.header_len += sizeof(struct udphdr) + 2 * sizeof(u32);
+			break;
+#ifdef CONFIG_INET6_ESPINTCP
+		case TCP_ENCAP_ESPINTCP:
+			/* only the length field, TCP encap is done by
+			 * the socket
+			 */
+			x->props.header_len += 2;
+			break;
+#endif
+		}
+	}
+
 	align = ALIGN(crypto_aead_blocksize(aead), 4);
 	x->props.trailer_len = align + 1 + crypto_aead_authsize(aead);
 
@@ -893,6 +1254,7 @@ static const struct xfrm_type esp6_type = {
 
 static struct xfrm6_protocol esp6_protocol = {
 	.handler	=	xfrm6_rcv,
+	.input_handler	=	xfrm_input,
 	.cb_handler	=	esp6_rcv_cb,
 	.err_handler	=	esp6_err,
 	.priority	=	0,
diff --git a/net/ipv6/esp6_offload.c b/net/ipv6/esp6_offload.c
index 8eab2c869d61..9fa25335bda7 100644
--- a/net/ipv6/esp6_offload.c
+++ b/net/ipv6/esp6_offload.c
@@ -85,10 +85,8 @@ static struct sk_buff *esp6_gro_receive(struct list_head *head,
 		sp->olen++;
 
 		xo = xfrm_offload(skb);
-		if (!xo) {
-			xfrm_state_put(x);
+		if (!xo)
 			goto out_reset;
-		}
 	}
 
 	xo->flags |= XFRM_GRO;
@@ -123,9 +121,16 @@ static void esp6_gso_encap(struct xfrm_state *x, struct sk_buff *skb)
 	struct ip_esp_hdr *esph;
 	struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct xfrm_offload *xo = xfrm_offload(skb);
-	int proto = iph->nexthdr;
+	u8 proto = iph->nexthdr;
 
 	skb_push(skb, -skb_network_offset(skb));
+
+	if (x->outer_mode.encap == XFRM_MODE_TRANSPORT) {
+		__be16 frag;
+
+		ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &proto, &frag);
+	}
+
 	esph = ip_esp_hdr(skb);
 	*skb_mac_header(skb) = IPPROTO_ESP;
 
@@ -166,7 +171,7 @@ static struct sk_buff *xfrm6_beet_gso_segment(struct xfrm_state *x,
 	struct xfrm_offload *xo = xfrm_offload(skb);
 	struct sk_buff *segs = ERR_PTR(-EINVAL);
 	const struct net_offload *ops;
-	int proto = xo->proto;
+	u8 proto = xo->proto;
 
 	skb->transport_header += x->props.header_len;
 
@@ -177,7 +182,12 @@ static struct sk_buff *xfrm6_beet_gso_segment(struct xfrm_state *x,
 		proto = ph->nexthdr;
 	}
 
-	if (x->sel.family != AF_INET6) {
+	if (x->sel.family == AF_INET6) {
+		__be16 frag;
+
+		skb->transport_header +=
+			ipv6_skip_exthdr(skb, 0, &proto, &frag);
+	} else {
 		skb->transport_header -=
 			(sizeof(struct ipv6hdr) - sizeof(struct iphdr));
 
@@ -271,7 +281,6 @@ static int esp6_xmit(struct xfrm_state *x, struct sk_buff *skb,  netdev_features
 	int alen;
 	int blksize;
 	struct xfrm_offload *xo;
-	struct ip_esp_hdr *esph;
 	struct crypto_aead *aead;
 	struct esp_info esp;
 	bool hw_offload = true;
@@ -312,13 +321,13 @@ static int esp6_xmit(struct xfrm_state *x, struct sk_buff *skb,  netdev_features
 
 	seq = xo->seq.low;
 
-	esph = ip_esp_hdr(skb);
-	esph->spi = x->id.spi;
+	esp.esph = ip_esp_hdr(skb);
+	esp.esph->spi = x->id.spi;
 
 	skb_push(skb, -skb_network_offset(skb));
 
 	if (xo->flags & XFRM_GSO_SEGMENT) {
-		esph->seq_no = htonl(seq);
+		esp.esph->seq_no = htonl(seq);
 
 		if (!skb_is_gso(skb))
 			xo->seq.low++;
diff --git a/net/ipv6/ila/ila.h b/net/ipv6/ila/ila.h
index bb6fc0d54dae..ad5f6f6ba333 100644
--- a/net/ipv6/ila/ila.h
+++ b/net/ipv6/ila/ila.h
@@ -68,11 +68,6 @@ static inline struct ila_addr *ila_a2i(struct in6_addr *addr)
 	return (struct ila_addr *)addr;
 }
 
-static inline bool ila_addr_is_ila(struct ila_addr *iaddr)
-{
-	return (iaddr->ident.type != ILA_ATYPE_IID);
-}
-
 struct ila_params {
 	struct ila_locator locator;
 	struct ila_locator locator_match;
diff --git a/net/ipv6/ila/ila_xlat.c b/net/ipv6/ila/ila_xlat.c
index 5fc1f4e0c0cf..a1ac0e3d8c60 100644
--- a/net/ipv6/ila/ila_xlat.c
+++ b/net/ipv6/ila/ila_xlat.c
@@ -601,8 +601,6 @@ int ila_xlat_nl_dump(struct sk_buff *skb, struct netlink_callback *cb)
 	return ret;
 }
 
-#define ILA_HASH_TABLE_SIZE 1024
-
 int ila_xlat_init_net(struct net *net)
 {
 	struct ila_net *ilan = net_generic(net, ila_net_id);
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index cc6180e08a4f..1147f647b9a0 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -296,7 +296,8 @@ static void vti6_dev_uninit(struct net_device *dev)
 	dev_put(dev);
 }
 
-static int vti6_rcv(struct sk_buff *skb)
+static int vti6_input_proto(struct sk_buff *skb, int nexthdr, __be32 spi,
+			    int encap_type)
 {
 	struct ip6_tnl *t;
 	const struct ipv6hdr *ipv6h = ipv6_hdr(skb);
@@ -323,7 +324,10 @@ static int vti6_rcv(struct sk_buff *skb)
 
 		rcu_read_unlock();
 
-		return xfrm6_rcv_tnl(skb, t);
+		XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 = t;
+		XFRM_SPI_SKB_CB(skb)->family = AF_INET6;
+		XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct ipv6hdr, daddr);
+		return xfrm_input(skb, nexthdr, spi, encap_type);
 	}
 	rcu_read_unlock();
 	return -EINVAL;
@@ -332,6 +336,13 @@ static int vti6_rcv(struct sk_buff *skb)
 	return 0;
 }
 
+static int vti6_rcv(struct sk_buff *skb)
+{
+	int nexthdr = skb_network_header(skb)[IP6CB(skb)->nhoff];
+
+	return vti6_input_proto(skb, nexthdr, 0, 0);
+}
+
 static int vti6_rcv_cb(struct sk_buff *skb, int err)
 {
 	unsigned short family;
@@ -1185,6 +1196,7 @@ static struct pernet_operations vti6_net_ops = {
 
 static struct xfrm6_protocol vti_esp6_protocol __read_mostly = {
 	.handler	=	vti6_rcv,
+	.input_handler	=	vti6_input_proto,
 	.cb_handler	=	vti6_rcv_cb,
 	.err_handler	=	vti6_err,
 	.priority	=	100,
@@ -1192,6 +1204,7 @@ static struct xfrm6_protocol vti_esp6_protocol __read_mostly = {
 
 static struct xfrm6_protocol vti_ah6_protocol __read_mostly = {
 	.handler	=	vti6_rcv,
+	.input_handler	=	vti6_input_proto,
 	.cb_handler	=	vti6_rcv_cb,
 	.err_handler	=	vti6_err,
 	.priority	=	100,
@@ -1199,6 +1212,7 @@ static struct xfrm6_protocol vti_ah6_protocol __read_mostly = {
 
 static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = {
 	.handler	=	vti6_rcv,
+	.input_handler	=	vti6_input_proto,
 	.cb_handler	=	vti6_rcv_cb,
 	.err_handler	=	vti6_err,
 	.priority	=	100,
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 3752bd3e92ce..99668bfebd85 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -183,6 +183,7 @@ static const struct xfrm_type ipcomp6_type = {
 
 static struct xfrm6_protocol ipcomp6_protocol = {
 	.handler	= xfrm6_rcv,
+	.input_handler	= xfrm_input,
 	.cb_handler	= ipcomp6_rcv_cb,
 	.err_handler	= ipcomp6_err,
 	.priority	= 0,
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 1ecd4e9b0bdf..27f29b957ee7 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1302,7 +1302,7 @@ static void ndisc_router_discovery(struct sk_buff *skb)
 		}
 	}
 	if (rt && lifetime == 0) {
-		ip6_del_rt(net, rt);
+		ip6_del_rt(net, rt, false);
 		rt = NULL;
 	}
 
@@ -1835,7 +1835,8 @@ static void ndisc_warn_deprecated_sysctl(struct ctl_table *ctl,
 	}
 }
 
-int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos)
+int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl, int write, void *buffer,
+		size_t *lenp, loff_t *ppos)
 {
 	struct net_device *dev = ctl->extra1;
 	struct inet6_dev *idev;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 310cbddaa533..3912aac7854d 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -984,7 +984,7 @@ int rt6_route_rcv(struct net_device *dev, u8 *opt, int len,
 					gwaddr, dev);
 
 	if (rt && !lifetime) {
-		ip6_del_rt(net, rt);
+		ip6_del_rt(net, rt, false);
 		rt = NULL;
 	}
 
@@ -3729,9 +3729,12 @@ static int __ip6_del_rt(struct fib6_info *rt, struct nl_info *info)
 	return err;
 }
 
-int ip6_del_rt(struct net *net, struct fib6_info *rt)
+int ip6_del_rt(struct net *net, struct fib6_info *rt, bool skip_notify)
 {
-	struct nl_info info = { .nl_net = net };
+	struct nl_info info = {
+		.nl_net = net,
+		.skip_notify = skip_notify
+	};
 
 	return __ip6_del_rt(rt, &info);
 }
@@ -4252,7 +4255,7 @@ static void __rt6_purge_dflt_routers(struct net *net,
 		    (!idev || idev->cnf.accept_ra != 2) &&
 		    fib6_info_hold_safe(rt)) {
 			rcu_read_unlock();
-			ip6_del_rt(net, rt);
+			ip6_del_rt(net, rt, false);
 			goto restart;
 		}
 	}
@@ -5554,7 +5557,8 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb,
 		if (nexthop_is_blackhole(rt->nh))
 			rtm->rtm_type = RTN_BLACKHOLE;
 
-		if (rt6_fill_node_nexthop(skb, rt->nh, &nh_flags) < 0)
+		if (net->ipv4.sysctl_nexthop_compat_mode &&
+		    rt6_fill_node_nexthop(skb, rt->nh, &nh_flags) < 0)
 			goto nla_put_failure;
 
 		rtm->rtm_flags |= nh_flags;
@@ -6088,9 +6092,8 @@ static int rt6_stats_seq_show(struct seq_file *seq, void *v)
 
 #ifdef CONFIG_SYSCTL
 
-static
-int ipv6_sysctl_rtcache_flush(struct ctl_table *ctl, int write,
-			      void __user *buffer, size_t *lenp, loff_t *ppos)
+static int ipv6_sysctl_rtcache_flush(struct ctl_table *ctl, int write,
+			      void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net;
 	int delay;
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 63b657aa8d29..fac2135aa47b 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -26,8 +26,7 @@ static int auto_flowlabels_min;
 static int auto_flowlabels_max = IP6_AUTO_FLOW_LABEL_MAX;
 
 static int proc_rt6_multipath_hash_policy(struct ctl_table *table, int write,
-					  void __user *buffer, size_t *lenp,
-					  loff_t *ppos)
+					  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net;
 	int ret;
diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c
index a52cb3fc6df5..56f52353b324 100644
--- a/net/ipv6/xfrm6_input.c
+++ b/net/ipv6/xfrm6_input.c
@@ -35,9 +35,12 @@ EXPORT_SYMBOL(xfrm6_rcv_spi);
 static int xfrm6_transport_finish2(struct net *net, struct sock *sk,
 				   struct sk_buff *skb)
 {
-	if (xfrm_trans_queue(skb, ip6_rcv_finish))
-		__kfree_skb(skb);
-	return -1;
+	if (xfrm_trans_queue(skb, ip6_rcv_finish)) {
+		kfree_skb(skb);
+		return NET_RX_DROP;
+	}
+
+	return 0;
 }
 
 int xfrm6_transport_finish(struct sk_buff *skb, int async)
@@ -60,13 +63,106 @@ int xfrm6_transport_finish(struct sk_buff *skb, int async)
 	if (xo && (xo->flags & XFRM_GRO)) {
 		skb_mac_header_rebuild(skb);
 		skb_reset_transport_header(skb);
-		return -1;
+		return 0;
 	}
 
 	NF_HOOK(NFPROTO_IPV6, NF_INET_PRE_ROUTING,
 		dev_net(skb->dev), NULL, skb, skb->dev, NULL,
 		xfrm6_transport_finish2);
-	return -1;
+	return 0;
+}
+
+/* If it's a keepalive packet, then just eat it.
+ * If it's an encapsulated packet, then pass it to the
+ * IPsec xfrm input.
+ * Returns 0 if skb passed to xfrm or was dropped.
+ * Returns >0 if skb should be passed to UDP.
+ * Returns <0 if skb should be resubmitted (-ret is protocol)
+ */
+int xfrm6_udp_encap_rcv(struct sock *sk, struct sk_buff *skb)
+{
+	struct udp_sock *up = udp_sk(sk);
+	struct udphdr *uh;
+	struct ipv6hdr *ip6h;
+	int len;
+	int ip6hlen = sizeof(struct ipv6hdr);
+
+	__u8 *udpdata;
+	__be32 *udpdata32;
+	__u16 encap_type = up->encap_type;
+
+	/* if this is not encapsulated socket, then just return now */
+	if (!encap_type)
+		return 1;
+
+	/* If this is a paged skb, make sure we pull up
+	 * whatever data we need to look at. */
+	len = skb->len - sizeof(struct udphdr);
+	if (!pskb_may_pull(skb, sizeof(struct udphdr) + min(len, 8)))
+		return 1;
+
+	/* Now we can get the pointers */
+	uh = udp_hdr(skb);
+	udpdata = (__u8 *)uh + sizeof(struct udphdr);
+	udpdata32 = (__be32 *)udpdata;
+
+	switch (encap_type) {
+	default:
+	case UDP_ENCAP_ESPINUDP:
+		/* Check if this is a keepalive packet.  If so, eat it. */
+		if (len == 1 && udpdata[0] == 0xff) {
+			goto drop;
+		} else if (len > sizeof(struct ip_esp_hdr) && udpdata32[0] != 0) {
+			/* ESP Packet without Non-ESP header */
+			len = sizeof(struct udphdr);
+		} else
+			/* Must be an IKE packet.. pass it through */
+			return 1;
+		break;
+	case UDP_ENCAP_ESPINUDP_NON_IKE:
+		/* Check if this is a keepalive packet.  If so, eat it. */
+		if (len == 1 && udpdata[0] == 0xff) {
+			goto drop;
+		} else if (len > 2 * sizeof(u32) + sizeof(struct ip_esp_hdr) &&
+			   udpdata32[0] == 0 && udpdata32[1] == 0) {
+
+			/* ESP Packet with Non-IKE marker */
+			len = sizeof(struct udphdr) + 2 * sizeof(u32);
+		} else
+			/* Must be an IKE packet.. pass it through */
+			return 1;
+		break;
+	}
+
+	/* At this point we are sure that this is an ESPinUDP packet,
+	 * so we need to remove 'len' bytes from the packet (the UDP
+	 * header and optional ESP marker bytes) and then modify the
+	 * protocol to ESP, and then call into the transform receiver.
+	 */
+	if (skb_unclone(skb, GFP_ATOMIC))
+		goto drop;
+
+	/* Now we can update and verify the packet length... */
+	ip6h = ipv6_hdr(skb);
+	ip6h->payload_len = htons(ntohs(ip6h->payload_len) - len);
+	if (skb->len < ip6hlen + len) {
+		/* packet is too small!?! */
+		goto drop;
+	}
+
+	/* pull the data buffer up to the ESP header and set the
+	 * transport header to point to ESP.  Keep UDP on the stack
+	 * for later.
+	 */
+	__skb_pull(skb, len);
+	skb_reset_transport_header(skb);
+
+	/* process ESP */
+	return xfrm6_rcv_encap(skb, IPPROTO_ESP, 0, encap_type);
+
+drop:
+	kfree_skb(skb);
+	return 0;
 }
 
 int xfrm6_rcv_tnl(struct sk_buff *skb, struct ip6_tnl *t)
diff --git a/net/ipv6/xfrm6_protocol.c b/net/ipv6/xfrm6_protocol.c
index 34cb65c7d5a7..ea2f805d3b01 100644
--- a/net/ipv6/xfrm6_protocol.c
+++ b/net/ipv6/xfrm6_protocol.c
@@ -14,6 +14,7 @@
 #include <linux/mutex.h>
 #include <linux/skbuff.h>
 #include <linux/icmpv6.h>
+#include <net/ip6_route.h>
 #include <net/ipv6.h>
 #include <net/protocol.h>
 #include <net/xfrm.h>
@@ -58,6 +59,53 @@ static int xfrm6_rcv_cb(struct sk_buff *skb, u8 protocol, int err)
 	return 0;
 }
 
+int xfrm6_rcv_encap(struct sk_buff *skb, int nexthdr, __be32 spi,
+		    int encap_type)
+{
+	int ret;
+	struct xfrm6_protocol *handler;
+	struct xfrm6_protocol __rcu **head = proto_handlers(nexthdr);
+
+	XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 = NULL;
+	XFRM_SPI_SKB_CB(skb)->family = AF_INET6;
+	XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct ipv6hdr, daddr);
+
+	if (!head)
+		goto out;
+
+	if (!skb_dst(skb)) {
+		const struct ipv6hdr *ip6h = ipv6_hdr(skb);
+		int flags = RT6_LOOKUP_F_HAS_SADDR;
+		struct dst_entry *dst;
+		struct flowi6 fl6 = {
+			.flowi6_iif   = skb->dev->ifindex,
+			.daddr        = ip6h->daddr,
+			.saddr        = ip6h->saddr,
+			.flowlabel    = ip6_flowinfo(ip6h),
+			.flowi6_mark  = skb->mark,
+			.flowi6_proto = ip6h->nexthdr,
+		};
+
+		dst = ip6_route_input_lookup(dev_net(skb->dev), skb->dev, &fl6,
+					     skb, flags);
+		if (dst->error)
+			goto drop;
+		skb_dst_set(skb, dst);
+	}
+
+	for_each_protocol_rcu(*head, handler)
+		if ((ret = handler->input_handler(skb, nexthdr, spi, encap_type)) != -EINVAL)
+			return ret;
+
+out:
+	icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_PORT_UNREACH, 0);
+
+drop:
+	kfree_skb(skb);
+	return 0;
+}
+EXPORT_SYMBOL(xfrm6_rcv_encap);
+
 static int xfrm6_esp_rcv(struct sk_buff *skb)
 {
 	int ret;
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 33da6f738c99..c2d5f512526d 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -9,7 +9,7 @@
  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
  * Copyright 2007-2010, Intel Corporation
  * Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2019 Intel Corporation
+ * Copyright (C) 2018 - 2020 Intel Corporation
  */
 
 #include <linux/ieee80211.h>
@@ -448,6 +448,45 @@ static void sta_addba_resp_timer_expired(struct timer_list *t)
 	ieee80211_stop_tx_ba_session(&sta->sta, tid);
 }
 
+static void ieee80211_send_addba_with_timeout(struct sta_info *sta,
+					      struct tid_ampdu_tx *tid_tx)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sta->local;
+	u8 tid = tid_tx->tid;
+	u16 buf_size;
+
+	/* activate the timer for the recipient's addBA response */
+	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
+	ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
+	       sta->sta.addr, tid);
+
+	spin_lock_bh(&sta->lock);
+	sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
+	sta->ampdu_mlme.addba_req_num[tid]++;
+	spin_unlock_bh(&sta->lock);
+
+	if (sta->sta.he_cap.has_he) {
+		buf_size = local->hw.max_tx_aggregation_subframes;
+	} else {
+		/*
+		 * We really should use what the driver told us it will
+		 * transmit as the maximum, but certain APs (e.g. the
+		 * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
+		 * will crash when we use a lower number.
+		 */
+		buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
+	}
+
+	/* send AddBA request */
+	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
+				     tid_tx->dialog_token,
+				     sta->tid_seq[tid] >> 4,
+				     buf_size, tid_tx->timeout);
+
+	WARN_ON(test_and_set_bit(HT_AGG_STATE_SENT_ADDBA, &tid_tx->state));
+}
+
 void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 {
 	struct tid_ampdu_tx *tid_tx;
@@ -462,7 +501,6 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 		.timeout = 0,
 	};
 	int ret;
-	u16 buf_size;
 
 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
@@ -485,7 +523,9 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 
 	params.ssn = sta->tid_seq[tid] >> 4;
 	ret = drv_ampdu_action(local, sdata, &params);
-	if (ret == IEEE80211_AMPDU_TX_START_IMMEDIATE) {
+	if (ret == IEEE80211_AMPDU_TX_START_DELAY_ADDBA) {
+		return;
+	} else if (ret == IEEE80211_AMPDU_TX_START_IMMEDIATE) {
 		/*
 		 * We didn't send the request yet, so don't need to check
 		 * here if we already got a response, just mark as driver
@@ -508,32 +548,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 		return;
 	}
 
-	/* activate the timer for the recipient's addBA response */
-	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
-	ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
-	       sta->sta.addr, tid);
-
-	spin_lock_bh(&sta->lock);
-	sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
-	sta->ampdu_mlme.addba_req_num[tid]++;
-	spin_unlock_bh(&sta->lock);
-
-	if (sta->sta.he_cap.has_he) {
-		buf_size = local->hw.max_tx_aggregation_subframes;
-	} else {
-		/*
-		 * We really should use what the driver told us it will
-		 * transmit as the maximum, but certain APs (e.g. the
-		 * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
-		 * will crash when we use a lower number.
-		 */
-		buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
-	}
-
-	/* send AddBA request */
-	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
-				     tid_tx->dialog_token, params.ssn,
-				     buf_size, tid_tx->timeout);
+	ieee80211_send_addba_with_timeout(sta, tid_tx);
 }
 
 /*
@@ -754,6 +769,12 @@ void ieee80211_start_tx_ba_cb(struct sta_info *sta, int tid,
 	if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
 		return;
 
+	if (!test_bit(HT_AGG_STATE_SENT_ADDBA, &tid_tx->state)) {
+		ieee80211_send_addba_with_timeout(sta, tid_tx);
+		/* RESPONSE_RECEIVED state whould trigger the flow again */
+		return;
+	}
+
 	if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
 		ieee80211_agg_tx_operational(local, sta, tid);
 }
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 0f72813fed53..548a384b0509 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -994,7 +994,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 		      BSS_CHANGED_TWT |
 		      BSS_CHANGED_HE_OBSS_PD |
 		      BSS_CHANGED_HE_BSS_COLOR;
-	int err;
+	int i, err;
 	int prev_beacon_int;
 
 	old = sdata_dereference(sdata->u.ap.beacon, sdata);
@@ -1085,6 +1085,17 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 		sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |=
 					IEEE80211_P2P_OPPPS_ENABLE_BIT;
 
+	sdata->beacon_rate_set = false;
+	if (wiphy_ext_feature_isset(local->hw.wiphy,
+				    NL80211_EXT_FEATURE_BEACON_RATE_LEGACY)) {
+		for (i = 0; i < NUM_NL80211_BANDS; i++) {
+			sdata->beacon_rateidx_mask[i] =
+				params->beacon_rate.control[i].legacy;
+			if (sdata->beacon_rateidx_mask[i])
+				sdata->beacon_rate_set = true;
+		}
+	}
+
 	err = ieee80211_assign_beacon(sdata, &params->beacon, NULL);
 	if (err < 0) {
 		ieee80211_vif_release_channel(sdata);
@@ -1189,6 +1200,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev)
 	ieee80211_free_keys(sdata, true);
 
 	sdata->vif.bss_conf.enable_beacon = false;
+	sdata->beacon_rate_set = false;
 	sdata->vif.bss_conf.ssid_len = 0;
 	clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
@@ -1949,6 +1961,7 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
 	const u8 *old_ie;
 	struct ieee80211_sub_if_data *sdata = container_of(ifmsh,
 					struct ieee80211_sub_if_data, u.mesh);
+	int i;
 
 	/* allocate information elements */
 	new_ie = NULL;
@@ -1987,6 +2000,17 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
 	sdata->vif.bss_conf.beacon_int = setup->beacon_interval;
 	sdata->vif.bss_conf.dtim_period = setup->dtim_period;
 
+	sdata->beacon_rate_set = false;
+	if (wiphy_ext_feature_isset(sdata->local->hw.wiphy,
+				    NL80211_EXT_FEATURE_BEACON_RATE_LEGACY)) {
+		for (i = 0; i < NUM_NL80211_BANDS; i++) {
+			sdata->beacon_rateidx_mask[i] =
+				setup->beacon_rate.control[i].legacy;
+			if (sdata->beacon_rateidx_mask[i])
+				sdata->beacon_rate_set = true;
+		}
+	}
+
 	return 0;
 }
 
@@ -3287,6 +3311,12 @@ __ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
 		goto out;
 	}
 
+	if (params->chandef.chan->freq_offset) {
+		/* this may work, but is untested */
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
 	chanctx = container_of(conf, struct ieee80211_chanctx, conf);
 
 	ch_switch.timestamp = 0;
@@ -3398,41 +3428,43 @@ int ieee80211_attach_ack_skb(struct ieee80211_local *local, struct sk_buff *skb,
 	return 0;
 }
 
-static void ieee80211_mgmt_frame_register(struct wiphy *wiphy,
+static void
+ieee80211_update_mgmt_frame_registrations(struct wiphy *wiphy,
 					  struct wireless_dev *wdev,
-					  u16 frame_type, bool reg)
+					  struct mgmt_frame_regs *upd)
 {
 	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
+	u32 preq_mask = BIT(IEEE80211_STYPE_PROBE_REQ >> 4);
+	u32 action_mask = BIT(IEEE80211_STYPE_ACTION >> 4);
+	bool global_change, intf_change;
+
+	global_change =
+		(local->probe_req_reg != !!(upd->global_stypes & preq_mask)) ||
+		(local->rx_mcast_action_reg !=
+		 !!(upd->global_mcast_stypes & action_mask));
+	local->probe_req_reg = upd->global_stypes & preq_mask;
+	local->rx_mcast_action_reg = upd->global_mcast_stypes & action_mask;
+
+	intf_change = (sdata->vif.probe_req_reg !=
+		       !!(upd->interface_stypes & preq_mask)) ||
+		(sdata->vif.rx_mcast_action_reg !=
+		 !!(upd->interface_mcast_stypes & action_mask));
+	sdata->vif.probe_req_reg = upd->interface_stypes & preq_mask;
+	sdata->vif.rx_mcast_action_reg =
+		upd->interface_mcast_stypes & action_mask;
+
+	if (!local->open_count)
+		return;
 
-	switch (frame_type) {
-	case IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ:
-		if (reg) {
-			local->probe_req_reg++;
-			sdata->vif.probe_req_reg++;
-		} else {
-			if (local->probe_req_reg)
-				local->probe_req_reg--;
-
-			if (sdata->vif.probe_req_reg)
-				sdata->vif.probe_req_reg--;
-		}
-
-		if (!local->open_count)
-			break;
-
-		if (sdata->vif.probe_req_reg == 1)
-			drv_config_iface_filter(local, sdata, FIF_PROBE_REQ,
-						FIF_PROBE_REQ);
-		else if (sdata->vif.probe_req_reg == 0)
-			drv_config_iface_filter(local, sdata, 0,
-						FIF_PROBE_REQ);
+	if (intf_change && ieee80211_sdata_running(sdata))
+		drv_config_iface_filter(local, sdata,
+					sdata->vif.probe_req_reg ?
+						FIF_PROBE_REQ : 0,
+					FIF_PROBE_REQ);
 
+	if (global_change)
 		ieee80211_configure_filter(local);
-		break;
-	default:
-		break;
-	}
 }
 
 static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
@@ -4017,7 +4049,8 @@ const struct cfg80211_ops mac80211_config_ops = {
 	.mgmt_tx_cancel_wait = ieee80211_mgmt_tx_cancel_wait,
 	.set_cqm_rssi_config = ieee80211_set_cqm_rssi_config,
 	.set_cqm_rssi_range_config = ieee80211_set_cqm_rssi_range_config,
-	.mgmt_frame_register = ieee80211_mgmt_frame_register,
+	.update_mgmt_frame_registrations =
+		ieee80211_update_mgmt_frame_registrations,
 	.set_antenna = ieee80211_set_antenna,
 	.get_antenna = ieee80211_get_antenna,
 	.set_rekey_data = ieee80211_set_rekey_data,
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 9c94baaf693c..e6e192f53e4e 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -533,6 +533,7 @@ static void ieee80211_del_chanctx(struct ieee80211_local *local,
 		struct cfg80211_chan_def *chandef = &local->_oper_chandef;
 		chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
 		chandef->center_freq1 = chandef->chan->center_freq;
+		chandef->freq1_offset = chandef->chan->freq_offset;
 		chandef->center_freq2 = 0;
 
 		/* NOTE: Disabling radar is only valid here for
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 3dbe7c5cefd1..d7e955127d5c 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -236,7 +236,7 @@ IEEE80211_IF_FILE_R(hw_queues);
 
 /* STA attributes */
 IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC);
-IEEE80211_IF_FILE(aid, u.mgd.aid, DEC);
+IEEE80211_IF_FILE(aid, vif.bss_conf.aid, DEC);
 IEEE80211_IF_FILE(beacon_timeout, u.mgd.beacon_timeout, JIFFIES_TO_MS);
 
 static int ieee80211_set_smps(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/he.c b/net/mac80211/he.c
index 1087f715338b..f520552b22be 100644
--- a/net/mac80211/he.c
+++ b/net/mac80211/he.c
@@ -57,17 +57,14 @@ ieee80211_he_cap_ie_to_sta_he_cap(struct ieee80211_sub_if_data *sdata,
 
 void
 ieee80211_he_op_ie_to_bss_conf(struct ieee80211_vif *vif,
-			const struct ieee80211_he_operation *he_op_ie_elem)
+			const struct ieee80211_he_operation *he_op_ie)
 {
-	struct ieee80211_he_operation *he_operation =
-					&vif->bss_conf.he_operation;
-
-	if (!he_op_ie_elem) {
-		memset(he_operation, 0, sizeof(*he_operation));
+	memset(&vif->bss_conf.he_oper, 0, sizeof(vif->bss_conf.he_oper));
+	if (!he_op_ie)
 		return;
-	}
 
-	vif->bss_conf.he_operation = *he_op_ie_elem;
+	vif->bss_conf.he_oper.params = __le32_to_cpu(he_op_ie->he_oper_params);
+	vif->bss_conf.he_oper.nss_set = __le16_to_cpu(he_op_ie->he_mcs_nss_set);
 }
 
 void
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index d40744903fa9..2479cd48fed0 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1758,6 +1758,11 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
 	int i;
 	int ret;
 
+	if (params->chandef.chan->freq_offset) {
+		/* this may work, but is untested */
+		return -EOPNOTSUPP;
+	}
+
 	ret = cfg80211_chandef_dfs_required(local->hw.wiphy,
 					    &params->chandef,
 					    sdata->wdev.iftype);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index f8ed4f621f7f..2d1b6cb75497 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -267,7 +267,7 @@ struct probe_resp {
 	struct rcu_head rcu_head;
 	int len;
 	u16 csa_counter_offsets[IEEE80211_MAX_CSA_COUNTERS_NUM];
-	u8 data[0];
+	u8 data[];
 };
 
 struct ps_data {
@@ -450,8 +450,6 @@ struct ieee80211_if_managed {
 
 	u8 bssid[ETH_ALEN] __aligned(2);
 
-	u16 aid;
-
 	bool powersave; /* powersave requested for this iface */
 	bool broken_ap; /* AP is broken -- turn off powersave */
 	bool have_beacon;
@@ -964,6 +962,10 @@ struct ieee80211_sub_if_data {
 	bool rc_has_vht_mcs_mask[NUM_NL80211_BANDS];
 	u16 rc_rateidx_vht_mcs_mask[NUM_NL80211_BANDS][NL80211_VHT_NSS_MAX];
 
+	/* Beacon frame (non-MCS) rate (as a bitmap) */
+	u32 beacon_rateidx_mask[NUM_NL80211_BANDS];
+	bool beacon_rate_set;
+
 	union {
 		struct ieee80211_if_ap ap;
 		struct ieee80211_if_wds wds;
@@ -1169,7 +1171,8 @@ struct ieee80211_local {
 	/* number of interfaces with corresponding FIF_ flags */
 	int fif_fcsfail, fif_plcpfail, fif_control, fif_other_bss, fif_pspoll,
 	    fif_probe_req;
-	int probe_req_reg;
+	bool probe_req_reg;
+	bool rx_mcast_action_reg;
 	unsigned int filter_flags; /* FIF_* */
 
 	bool wiphy_ciphers_allocated;
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index d069825705d6..f900c84fb40f 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -644,6 +644,11 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
 			local->fif_probe_req++;
 		}
 
+		if (sdata->vif.probe_req_reg)
+			drv_config_iface_filter(local, sdata,
+						FIF_PROBE_REQ,
+						FIF_PROBE_REQ);
+
 		if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE &&
 		    sdata->vif.type != NL80211_IFTYPE_NAN)
 			changed |= ieee80211_reset_erp_info(sdata);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 6423173bb87e..06c90d360633 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -64,6 +64,9 @@ void ieee80211_configure_filter(struct ieee80211_local *local)
 	if (local->fif_pspoll)
 		new_flags |= FIF_PSPOLL;
 
+	if (local->rx_mcast_action_reg)
+		new_flags |= FIF_MCAST_ACTION;
+
 	spin_lock_bh(&local->filter_lock);
 	changed_flags = local->filter_flags ^ new_flags;
 
@@ -104,13 +107,15 @@ static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
 		chandef.chan = local->tmp_channel;
 		chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
 		chandef.center_freq1 = chandef.chan->center_freq;
+		chandef.freq1_offset = chandef.chan->freq_offset;
 	} else
 		chandef = local->_oper_chandef;
 
 	WARN(!cfg80211_chandef_valid(&chandef),
-	     "control:%d MHz width:%d center: %d/%d MHz",
-	     chandef.chan->center_freq, chandef.width,
-	     chandef.center_freq1, chandef.center_freq2);
+	     "control:%d.%03d MHz width:%d center: %d.%03d/%d MHz",
+	     chandef.chan->center_freq, chandef.chan->freq_offset,
+	     chandef.width, chandef.center_freq1, chandef.freq1_offset,
+	     chandef.center_freq2);
 
 	if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
 		local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 36978a0e5000..5930d07b1e43 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -994,6 +994,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 	/* stop the beacon */
 	ifmsh->mesh_id_len = 0;
 	sdata->vif.bss_conf.enable_beacon = false;
+	sdata->beacon_rate_set = false;
 	clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 16d75da0996a..a259b4487b60 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -162,6 +162,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 	chandef->chan = channel;
 	chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
 	chandef->center_freq1 = channel->center_freq;
+	chandef->freq1_offset = channel->freq_offset;
 
 	if (!ht_oper || !sta_ht_cap.ht_supported) {
 		ret = IEEE80211_STA_DISABLE_HT |
@@ -396,9 +397,12 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
 		return 0;
 
 	sdata_info(sdata,
-		   "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
-		   ifmgd->bssid, chandef.chan->center_freq, chandef.width,
-		   chandef.center_freq1, chandef.center_freq2);
+		   "AP %pM changed bandwidth, new config is %d.%03d MHz, "
+		   "width %d (%d.%03d/%d MHz)\n",
+		   ifmgd->bssid, chandef.chan->center_freq,
+		   chandef.chan->freq_offset, chandef.width,
+		   chandef.center_freq1, chandef.freq1_offset,
+		   chandef.center_freq2);
 
 	if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
 				      IEEE80211_STA_DISABLE_VHT |
@@ -1364,10 +1368,14 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 	if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
 				     IEEE80211_CHAN_DISABLED)) {
 		sdata_info(sdata,
-			   "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
+			   "AP %pM switches to unsupported channel "
+			   "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), "
+			   "disconnecting\n",
 			   ifmgd->associated->bssid,
 			   csa_ie.chandef.chan->center_freq,
+			   csa_ie.chandef.chan->freq_offset,
 			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
+			   csa_ie.chandef.freq1_offset,
 			   csa_ie.chandef.center_freq2);
 		ieee80211_queue_work(&local->hw,
 				     &ifmgd->csa_connection_drop_work);
@@ -2948,10 +2956,15 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (status_code != WLAN_STATUS_SUCCESS) {
+		cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
+
+		if (auth_alg == WLAN_AUTH_SAE &&
+		    status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED)
+			return;
+
 		sdata_info(sdata, "%pM denied authentication (status %d)\n",
 			   mgmt->sa, status_code);
 		ieee80211_destroy_auth_data(sdata, false);
-		cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
 		event.u.mlme.status = MLME_DENIED;
 		event.u.mlme.reason = status_code;
 		drv_event_callback(sdata->local, sdata, &event);
@@ -3149,15 +3162,16 @@ static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
 			*have_higher_than_11mbit = true;
 
 		/*
-		 * Skip HT and VHT BSS membership selectors since they're not
-		 * rates.
+		 * Skip HT, VHT and HE BSS membership selectors since they're
+		 * not rates.
 		 *
 		 * Note: Even though the membership selector and the basic
 		 *	 rate flag share the same bit, they are not exactly
 		 *	 the same.
 		 */
 		if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
-		    supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY))
+		    supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) ||
+		    supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY))
 			continue;
 
 		for (j = 0; j < sband->n_bitrates; j++) {
@@ -3249,7 +3263,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 		return false;
 	}
 
-	ifmgd->aid = aid;
+	sdata->vif.bss_conf.aid = aid;
 	ifmgd->tdls_chan_switch_prohibited =
 		elems->ext_capab && elems->ext_capab_len >= 5 &&
 		(elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
@@ -3384,10 +3398,19 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 						  sta);
 
 		bss_conf->he_support = sta->sta.he_cap.has_he;
+		if (elems->rsnx && elems->rsnx_len &&
+		    (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) &&
+		    wiphy_ext_feature_isset(local->hw.wiphy,
+					    NL80211_EXT_FEATURE_PROTECTED_TWT))
+			bss_conf->twt_protected = true;
+		else
+			bss_conf->twt_protected = false;
+
 		changed |= ieee80211_recalc_twt_req(sdata, sta, elems);
 	} else {
 		bss_conf->he_support = false;
 		bss_conf->twt_requester = false;
+		bss_conf->twt_protected = false;
 	}
 
 	if (bss_conf->he_support) {
@@ -3521,9 +3544,8 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 		bss_conf->protected_keep_alive = false;
 	}
 
-	/* set AID and assoc capability,
+	/* set assoc capability (AID was already set earlier),
 	 * ieee80211_set_associated() will tell the driver */
-	bss_conf->aid = aid;
 	bss_conf->assoc_capability = capab_info;
 	ieee80211_set_associated(sdata, cbss, changed);
 
@@ -3661,7 +3683,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 
 	sdata_assert_lock(sdata);
 
-	channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
+	channel = ieee80211_get_channel_khz(local->hw.wiphy,
+					ieee80211_rx_status_to_khz(rx_status));
 	if (!channel)
 		return;
 
@@ -3877,7 +3900,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 		return;
 	}
 
-	if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
+	if (ieee80211_rx_status_to_khz(rx_status) !=
+	    ieee80211_channel_to_khz(chanctx_conf->def.chan)) {
 		rcu_read_unlock();
 		return;
 	}
@@ -3948,7 +3972,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 					  mgmt->bssid, bssid);
 
 	if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
-	    ieee80211_check_tim(elems.tim, elems.tim_len, ifmgd->aid)) {
+	    ieee80211_check_tim(elems.tim, elems.tim_len, bss_conf->aid)) {
 		if (local->hw.conf.dynamic_ps_timeout > 0) {
 			if (local->hw.conf.flags & IEEE80211_CONF_PS) {
 				local->hw.conf.flags &= ~IEEE80211_CONF_PS;
@@ -5022,8 +5046,16 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 		 * doesn't happen any more, but keep the workaround so
 		 * in case some *other* APs are buggy in different ways
 		 * we can connect -- with a warning.
+		 * Allow this workaround only in case the AP provided at least
+		 * one rate.
 		 */
-		if (!basic_rates && min_rate_index >= 0) {
+		if (min_rate_index < 0) {
+			sdata_info(sdata,
+				   "No legacy rates in association response\n");
+
+			sta_info_free(local, new_sta);
+			return -EINVAL;
+		} else if (!basic_rates) {
 			sdata_info(sdata,
 				   "No basic rates, using min rate instead\n");
 			basic_rates = BIT(min_rate_index);
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index c710504ccf1a..db3b8bf75656 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -557,6 +557,10 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local,
 
 	lockdep_assert_held(&local->mtx);
 
+	if (channel->freq_offset)
+		/* this may work, but is untested */
+		return -EOPNOTSUPP;
+
 	if (local->use_chanctx && !local->ops->remain_on_channel)
 		return -EOPNOTSUPP;
 
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 5dc3e5bc4e64..b11a2af55b06 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2010-2013 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2019-2020 Intel Corporation
  */
 #include <linux/netdevice.h>
 #include <linux/types.h>
@@ -490,7 +491,7 @@ minstrel_ht_assign_best_tp_rates(struct minstrel_ht_sta *mi,
 	tmp_prob = mi->groups[tmp_group].rates[tmp_idx].prob_avg;
 	tmp_mcs_tp = minstrel_ht_get_tp_avg(mi, tmp_group, tmp_idx, tmp_prob);
 
-	if (tmp_cck_tp_rate && tmp_cck_tp > tmp_mcs_tp) {
+	if (tmp_cck_tp > tmp_mcs_tp) {
 		for(i = 0; i < MAX_THR_RATES; i++) {
 			minstrel_ht_sort_best_tp_rates(mi, tmp_cck_tp_rate[i],
 						       tmp_mcs_tp_rate);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 91a13aee4378..eaf8931e4627 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -412,6 +412,7 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 	pos++;
 
 	/* IEEE80211_RADIOTAP_CHANNEL */
+	/* TODO: frequency offset in KHz */
 	put_unaligned_le16(status->freq, pos);
 	pos += 2;
 	if (status->bw == RATE_INFO_BW_10)
@@ -1984,8 +1985,12 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 
 		if (mmie_keyidx < NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS ||
 		    mmie_keyidx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS +
-		    NUM_DEFAULT_BEACON_KEYS)
+		    NUM_DEFAULT_BEACON_KEYS) {
+			cfg80211_rx_unprot_mlme_mgmt(rx->sdata->dev,
+						     skb->data,
+						     skb->len);
 			return RX_DROP_MONITOR; /* unexpected BIP keyidx */
+		}
 
 		rx->key = ieee80211_rx_get_bigtk(rx, mmie_keyidx);
 		if (!rx->key)
@@ -2131,6 +2136,10 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 	/* either the frame has been decrypted or will be dropped */
 	status->flag |= RX_FLAG_DECRYPTED;
 
+	if (unlikely(ieee80211_is_beacon(fc) && result == RX_DROP_UNUSABLE))
+		cfg80211_rx_unprot_mlme_mgmt(rx->sdata->dev,
+					     skb->data, skb->len);
+
 	return result;
 }
 
@@ -2411,8 +2420,12 @@ static int ieee80211_drop_unencrypted_mgmt(struct ieee80211_rx_data *rx)
 			return -EACCES;
 		}
 		if (unlikely(ieee80211_is_beacon(fc) && rx->key &&
-			     ieee80211_get_mmie_keyidx(rx->skb) < 0))
+			     ieee80211_get_mmie_keyidx(rx->skb) < 0)) {
+			cfg80211_rx_unprot_mlme_mgmt(rx->sdata->dev,
+						     rx->skb->data,
+						     rx->skb->len);
 			return -EACCES;
+		}
 		/*
 		 * When using MFP, Action frames are not allowed prior to
 		 * having configured keys.
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index fdac8192a519..5db15996524f 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -275,7 +275,8 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
 			return;
 	}
 
-	channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
+	channel = ieee80211_get_channel_khz(local->hw.wiphy,
+					ieee80211_rx_status_to_khz(rx_status));
 
 	if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
 		return;
@@ -896,6 +897,7 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 
 	local->scan_chandef.chan = chan;
 	local->scan_chandef.center_freq1 = chan->center_freq;
+	local->scan_chandef.freq1_offset = chan->freq_offset;
 	local->scan_chandef.center_freq2 = 0;
 	switch (scan_req->scan_width) {
 	case NL80211_BSS_CHAN_WIDTH_5:
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 36f1abaab9ff..49728047dfad 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -3,6 +3,7 @@
  * Copyright 2002-2005, Devicescape Software, Inc.
  * Copyright 2013-2014  Intel Mobile Communications GmbH
  * Copyright(c) 2015-2017 Intel Deutschland GmbH
+ * Copyright(c) 2020 Intel Corporation
  */
 
 #ifndef STA_INFO_H
@@ -68,6 +69,8 @@
  * @WLAN_STA_MPSP_RECIPIENT: local STA is recipient of a MPSP.
  * @WLAN_STA_PS_DELIVER: station woke up, but we're still blocking TX
  *	until pending frames are delivered
+ * @WLAN_STA_USES_ENCRYPTION: This station was configured for encryption,
+ *	so drop all packets without a key later.
  *
  * @NUM_WLAN_STA_FLAGS: number of defined flags
  */
@@ -116,6 +119,7 @@ enum ieee80211_sta_info_flags {
 #define HT_AGG_STATE_WANT_STOP		5
 #define HT_AGG_STATE_START_CB		6
 #define HT_AGG_STATE_STOP_CB		7
+#define HT_AGG_STATE_SENT_ADDBA		8
 
 DECLARE_EWMA(avg_signal, 10, 8)
 enum ieee80211_agg_stop_reason {
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index fca1f5477396..8ad420db3766 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -226,12 +226,11 @@ static void ieee80211_tdls_add_link_ie(struct ieee80211_sub_if_data *sdata,
 static void
 ieee80211_tdls_add_aid(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
 {
-	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	u8 *pos = skb_put(skb, 4);
 
 	*pos++ = WLAN_EID_AID;
 	*pos++ = 2; /* len */
-	put_unaligned_le16(ifmgd->aid, pos);
+	put_unaligned_le16(sdata->vif.bss_conf.aid, pos);
 }
 
 /* translate numbering in the WMM parameter IE to the mac80211 notation */
@@ -1567,6 +1566,10 @@ ieee80211_tdls_channel_switch(struct wiphy *wiphy, struct net_device *dev,
 	u32 ch_sw_tm_ie;
 	int ret;
 
+	if (chandef->chan->freq_offset)
+		/* this may work, but is untested */
+		return -EOPNOTSUPP;
+
 	mutex_lock(&local->sta_mtx);
 	sta = sta_info_get(sdata, addr);
 	if (!sta) {
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 427f51a0a994..1b4709694d2a 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -37,32 +37,42 @@
 #define VIF_PR_ARG	__get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : ""
 
 #define CHANDEF_ENTRY	__field(u32, control_freq)					\
+			__field(u32, freq_offset)					\
 			__field(u32, chan_width)					\
 			__field(u32, center_freq1)					\
+			__field(u32, freq1_offset)					\
 			__field(u32, center_freq2)
 #define CHANDEF_ASSIGN(c)							\
 			__entry->control_freq = (c) ? ((c)->chan ? (c)->chan->center_freq : 0) : 0;	\
+			__entry->freq_offset = (c) ? ((c)->chan ? (c)->chan->freq_offset : 0) : 0;	\
 			__entry->chan_width = (c) ? (c)->width : 0;			\
 			__entry->center_freq1 = (c) ? (c)->center_freq1 : 0;		\
+			__entry->freq1_offset = (c) ? (c)->freq1_offset : 0;		\
 			__entry->center_freq2 = (c) ? (c)->center_freq2 : 0;
-#define CHANDEF_PR_FMT	" control:%d MHz width:%d center: %d/%d MHz"
-#define CHANDEF_PR_ARG	__entry->control_freq, __entry->chan_width,			\
-			__entry->center_freq1, __entry->center_freq2
+#define CHANDEF_PR_FMT	" control:%d.%03d MHz width:%d center: %d.%03d/%d MHz"
+#define CHANDEF_PR_ARG	__entry->control_freq, __entry->freq_offset, __entry->chan_width, \
+			__entry->center_freq1, __entry->freq1_offset, __entry->center_freq2
 
 #define MIN_CHANDEF_ENTRY								\
 			__field(u32, min_control_freq)					\
+			__field(u32, min_freq_offset)					\
 			__field(u32, min_chan_width)					\
 			__field(u32, min_center_freq1)					\
+			__field(u32, min_freq1_offset)					\
 			__field(u32, min_center_freq2)
 
 #define MIN_CHANDEF_ASSIGN(c)								\
 			__entry->min_control_freq = (c)->chan ? (c)->chan->center_freq : 0;	\
+			__entry->min_freq_offset = (c)->chan ? (c)->chan->freq_offset : 0;	\
 			__entry->min_chan_width = (c)->width;				\
 			__entry->min_center_freq1 = (c)->center_freq1;			\
+			__entry->freq1_offset = (c)->freq1_offset;			\
 			__entry->min_center_freq2 = (c)->center_freq2;
-#define MIN_CHANDEF_PR_FMT	" min_control:%d MHz min_width:%d min_center: %d/%d MHz"
-#define MIN_CHANDEF_PR_ARG	__entry->min_control_freq, __entry->min_chan_width,	\
-			__entry->min_center_freq1, __entry->min_center_freq2
+#define MIN_CHANDEF_PR_FMT	" min_control:%d.%03d MHz min_width:%d min_center: %d.%03d/%d MHz"
+#define MIN_CHANDEF_PR_ARG	__entry->min_control_freq, __entry->min_freq_offset,	\
+			__entry->min_chan_width,					\
+			__entry->min_center_freq1, __entry->min_freq1_offset,		\
+			__entry->min_center_freq2
 
 #define CHANCTX_ENTRY	CHANDEF_ENTRY							\
 			MIN_CHANDEF_ENTRY						\
@@ -412,6 +422,7 @@ TRACE_EVENT(drv_bss_info_changed,
 		__field(s32, cqm_rssi_hyst)
 		__field(u32, channel_width)
 		__field(u32, channel_cfreq1)
+		__field(u32, channel_cfreq1_offset)
 		__dynamic_array(u32, arp_addr_list,
 				info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ?
 					IEEE80211_BSS_ARP_ADDR_LIST_LEN :
@@ -452,6 +463,7 @@ TRACE_EVENT(drv_bss_info_changed,
 		__entry->cqm_rssi_hyst = info->cqm_rssi_hyst;
 		__entry->channel_width = info->chandef.width;
 		__entry->channel_cfreq1 = info->chandef.center_freq1;
+		__entry->channel_cfreq1_offset = info->chandef.freq1_offset;
 		__entry->arp_addr_cnt = info->arp_addr_cnt;
 		memcpy(__get_dynamic_array(arp_addr_list), info->arp_addr_list,
 		       sizeof(u32) * (info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ?
@@ -1223,6 +1235,7 @@ TRACE_EVENT(drv_remain_on_channel,
 		LOCAL_ENTRY
 		VIF_ENTRY
 		__field(int, center_freq)
+		__field(int, freq_offset)
 		__field(unsigned int, duration)
 		__field(u32, type)
 	),
@@ -1231,14 +1244,16 @@ TRACE_EVENT(drv_remain_on_channel,
 		LOCAL_ASSIGN;
 		VIF_ASSIGN;
 		__entry->center_freq = chan->center_freq;
+		__entry->freq_offset = chan->freq_offset;
 		__entry->duration = duration;
 		__entry->type = type;
 	),
 
 	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT " freq:%dMHz duration:%dms type=%d",
+		LOCAL_PR_FMT  VIF_PR_FMT " freq:%d.%03dMHz duration:%dms type=%d",
 		LOCAL_PR_ARG, VIF_PR_ARG,
-		__entry->center_freq, __entry->duration, __entry->type
+		__entry->center_freq, __entry->freq_offset,
+		__entry->duration, __entry->type
 	)
 );
 
@@ -1546,8 +1561,10 @@ struct trace_vif_entry {
 
 struct trace_chandef_entry {
 	u32 control_freq;
+	u32 freq_offset;
 	u32 chan_width;
 	u32 center_freq1;
+	u32 freq1_offset;
 	u32 center_freq2;
 } __packed;
 
@@ -1597,18 +1614,26 @@ TRACE_EVENT(drv_switch_vif_chanctx,
 					sizeof(local_vifs[i].vif.vif_name));
 				SWITCH_ENTRY_ASSIGN(old_chandef.control_freq,
 						old_ctx->def.chan->center_freq);
+				SWITCH_ENTRY_ASSIGN(old_chandef.freq_offset,
+						old_ctx->def.chan->freq_offset);
 				SWITCH_ENTRY_ASSIGN(old_chandef.chan_width,
 						    old_ctx->def.width);
 				SWITCH_ENTRY_ASSIGN(old_chandef.center_freq1,
 						    old_ctx->def.center_freq1);
+				SWITCH_ENTRY_ASSIGN(old_chandef.freq1_offset,
+						    old_ctx->def.freq1_offset);
 				SWITCH_ENTRY_ASSIGN(old_chandef.center_freq2,
 						    old_ctx->def.center_freq2);
 				SWITCH_ENTRY_ASSIGN(new_chandef.control_freq,
 						new_ctx->def.chan->center_freq);
+				SWITCH_ENTRY_ASSIGN(new_chandef.freq_offset,
+						new_ctx->def.chan->freq_offset);
 				SWITCH_ENTRY_ASSIGN(new_chandef.chan_width,
 						    new_ctx->def.width);
 				SWITCH_ENTRY_ASSIGN(new_chandef.center_freq1,
 						    new_ctx->def.center_freq1);
+				SWITCH_ENTRY_ASSIGN(new_chandef.freq1_offset,
+						    new_ctx->def.freq1_offset);
 				SWITCH_ENTRY_ASSIGN(new_chandef.center_freq2,
 						    new_ctx->def.center_freq2);
 			}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 82846aca86d9..6dad67eb60b2 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -4883,7 +4883,10 @@ __ieee80211_beacon_get(struct ieee80211_hw *hw,
 	txrc.bss_conf = &sdata->vif.bss_conf;
 	txrc.skb = skb;
 	txrc.reported_rate.idx = -1;
-	txrc.rate_idx_mask = sdata->rc_rateidx_mask[band];
+	if (sdata->beacon_rate_set && sdata->beacon_rateidx_mask[band])
+		txrc.rate_idx_mask = sdata->beacon_rateidx_mask[band];
+	else
+		txrc.rate_idx_mask = sdata->rc_rateidx_mask[band];
 	txrc.bss = true;
 	rate_control_get_rate(sdata, NULL, &txrc);
 
@@ -5006,7 +5009,7 @@ struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
 	pspoll = skb_put_zero(skb, sizeof(*pspoll));
 	pspoll->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
 					    IEEE80211_STYPE_PSPOLL);
-	pspoll->aid = cpu_to_le16(ifmgd->aid);
+	pspoll->aid = cpu_to_le16(sdata->vif.bss_conf.aid);
 
 	/* aid in PS-Poll has its two MSBs each set to 1 */
 	pspoll->aid |= cpu_to_le16(1 << 15 | 1 << 14);
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index 632f07401850..9c6045f9c24d 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -4,7 +4,7 @@
  *
  * Portions of this file
  * Copyright(c) 2015 - 2016 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2019 Intel Corporation
+ * Copyright (C) 2018 - 2020 Intel Corporation
  */
 
 #include <linux/ieee80211.h>
@@ -575,15 +575,21 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 
 	switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) {
 	case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ:
+		/* ignore IEEE80211_OPMODE_NOTIF_BW_160_80P80 must not be set */
 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20;
 		break;
 	case IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ:
+		/* ignore IEEE80211_OPMODE_NOTIF_BW_160_80P80 must not be set */
 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40;
 		break;
 	case IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ:
-		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80;
+		if (opmode & IEEE80211_OPMODE_NOTIF_BW_160_80P80)
+			sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160;
+		else
+			sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80;
 		break;
 	case IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ:
+		/* legacy only, no longer used by newer spec */
 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160;
 		break;
 	}
diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c
index 4701edffb1f7..a42e4ed5ab0e 100644
--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -1362,8 +1362,7 @@ static int mpls_netconf_dump_devconf(struct sk_buff *skb,
 	(&((struct mpls_dev *)0)->field)
 
 static int mpls_conf_proc(struct ctl_table *ctl, int write,
-			  void __user *buffer,
-			  size_t *lenp, loff_t *ppos)
+			  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int oval = *(int *)ctl->data;
 	int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
@@ -2594,7 +2593,7 @@ static int resize_platform_label_table(struct net *net, size_t limit)
 }
 
 static int mpls_platform_labels(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net = table->data;
 	int platform_labels = net->mpls.platform_labels;
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index b22a63ba2348..6e0188f5d3f3 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -1316,11 +1316,12 @@ static void mptcp_copy_inaddrs(struct sock *msk, const struct sock *ssk)
 
 static int mptcp_disconnect(struct sock *sk, int flags)
 {
-	lock_sock(sk);
-	__mptcp_clear_xmit(sk);
-	release_sock(sk);
-	mptcp_cancel_work(sk);
-	return tcp_disconnect(sk, flags);
+	/* Should never be called.
+	 * inet_stream_connect() calls ->disconnect, but that
+	 * refers to the subflow socket, not the mptcp one.
+	 */
+	WARN_ON_ONCE(1);
+	return 0;
 }
 
 #if IS_ENABLED(CONFIG_MPTCP_IPV6)
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index fabd06f2ff45..2488e011048c 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -225,7 +225,7 @@ static void subflow_finish_connect(struct sock *sk, const struct sk_buff *skb)
 
 	subflow->icsk_af_ops->sk_rx_dst_set(sk, skb);
 
-	if (inet_sk_state_load(parent) != TCP_ESTABLISHED) {
+	if (inet_sk_state_load(parent) == TCP_SYN_SENT) {
 		inet_sk_state_store(parent, TCP_ESTABLISHED);
 		parent->sk_state_change(parent);
 	}
@@ -821,6 +821,24 @@ bool mptcp_subflow_data_available(struct sock *sk)
 	return subflow->data_avail;
 }
 
+/* If ssk has an mptcp parent socket, use the mptcp rcvbuf occupancy,
+ * not the ssk one.
+ *
+ * In mptcp, rwin is about the mptcp-level connection data.
+ *
+ * Data that is still on the ssk rx queue can thus be ignored,
+ * as far as mptcp peer is concerened that data is still inflight.
+ * DSS ACK is updated when skb is moved to the mptcp rx queue.
+ */
+void mptcp_space(const struct sock *ssk, int *space, int *full_space)
+{
+	const struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
+	const struct sock *sk = subflow->conn;
+
+	*space = tcp_space(sk);
+	*full_space = tcp_full_space(sk);
+}
+
 static void subflow_data_ready(struct sock *sk)
 {
 	struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(sk);
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 8d14a1acbc37..412656c34f20 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -1736,7 +1736,7 @@ static int three = 3;
 
 static int
 proc_do_defense_mode(struct ctl_table *table, int write,
-		     void __user *buffer, size_t *lenp, loff_t *ppos)
+		     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct netns_ipvs *ipvs = table->extra2;
 	int *valp = table->data;
@@ -1763,7 +1763,7 @@ proc_do_defense_mode(struct ctl_table *table, int write,
 
 static int
 proc_do_sync_threshold(struct ctl_table *table, int write,
-		       void __user *buffer, size_t *lenp, loff_t *ppos)
+		       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *valp = table->data;
 	int val[2];
@@ -1788,7 +1788,7 @@ proc_do_sync_threshold(struct ctl_table *table, int write,
 
 static int
 proc_do_sync_ports(struct ctl_table *table, int write,
-		   void __user *buffer, size_t *lenp, loff_t *ppos)
+		   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int *valp = table->data;
 	int val = *valp;
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 9b57330c81f8..6a26299cb064 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -348,7 +348,9 @@ static int ct_seq_show(struct seq_file *s, void *v)
 	if (seq_print_acct(s, ct, IP_CT_DIR_REPLY))
 		goto release;
 
-	if (test_bit(IPS_OFFLOAD_BIT, &ct->status))
+	if (test_bit(IPS_HW_OFFLOAD_BIT, &ct->status))
+		seq_puts(s, "[HW_OFFLOAD] ");
+	else if (test_bit(IPS_OFFLOAD_BIT, &ct->status))
 		seq_puts(s, "[OFFLOAD] ");
 	else if (test_bit(IPS_ASSURED_BIT, &ct->status))
 		seq_puts(s, "[ASSURED] ");
@@ -517,7 +519,7 @@ static unsigned int nf_conntrack_htable_size_user __read_mostly;
 
 static int
 nf_conntrack_hash_sysctl(struct ctl_table *table, int write,
-			 void __user *buffer, size_t *lenp, loff_t *ppos)
+			 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 
diff --git a/net/netfilter/nf_flow_table_offload.c b/net/netfilter/nf_flow_table_offload.c
index e3b099c14eff..a2abb0feab7f 100644
--- a/net/netfilter/nf_flow_table_offload.c
+++ b/net/netfilter/nf_flow_table_offload.c
@@ -754,12 +754,15 @@ static void flow_offload_work_add(struct flow_offload_work *offload)
 	err = flow_offload_rule_add(offload, flow_rule);
 	if (err < 0)
 		set_bit(NF_FLOW_HW_REFRESH, &offload->flow->flags);
+	else
+		set_bit(IPS_HW_OFFLOAD_BIT, &offload->flow->ct->status);
 
 	nf_flow_offload_destroy(flow_rule);
 }
 
 static void flow_offload_work_del(struct flow_offload_work *offload)
 {
+	clear_bit(IPS_HW_OFFLOAD_BIT, &offload->flow->ct->status);
 	flow_offload_tuple_del(offload, FLOW_OFFLOAD_DIR_ORIGINAL);
 	flow_offload_tuple_del(offload, FLOW_OFFLOAD_DIR_REPLY);
 	set_bit(NF_FLOW_HW_DEAD, &offload->flow->flags);
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index bb25d4c794c7..6cb9f9474b05 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -414,7 +414,7 @@ static struct ctl_table nf_log_sysctl_ftable[] = {
 };
 
 static int nf_log_proc_dostring(struct ctl_table *table, int write,
-			 void __user *buffer, size_t *lenp, loff_t *ppos)
+			 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	const struct nf_logger *logger;
 	char buf[NFLOGGER_NAME_LEN];
diff --git a/net/netfilter/nf_nat_proto.c b/net/netfilter/nf_nat_proto.c
index 3d816a1e5442..59151dc07fdc 100644
--- a/net/netfilter/nf_nat_proto.c
+++ b/net/netfilter/nf_nat_proto.c
@@ -68,15 +68,13 @@ static bool udp_manip_pkt(struct sk_buff *skb,
 			  enum nf_nat_manip_type maniptype)
 {
 	struct udphdr *hdr;
-	bool do_csum;
 
 	if (skb_ensure_writable(skb, hdroff + sizeof(*hdr)))
 		return false;
 
 	hdr = (struct udphdr *)(skb->data + hdroff);
-	do_csum = hdr->check || skb->ip_summed == CHECKSUM_PARTIAL;
+	__udp_manip_pkt(skb, iphdroff, hdr, tuple, maniptype, !!hdr->check);
 
-	__udp_manip_pkt(skb, iphdroff, hdr, tuple, maniptype, do_csum);
 	return true;
 }
 
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 9780bd93b7e4..3558e76e2733 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -4669,6 +4669,25 @@ static int nft_setelem_parse_key(struct nft_ctx *ctx, struct nft_set *set,
 	return 0;
 }
 
+static int nft_setelem_parse_data(struct nft_ctx *ctx, struct nft_set *set,
+				  struct nft_data_desc *desc,
+				  struct nft_data *data,
+				  struct nlattr *attr)
+{
+	int err;
+
+	err = nft_data_init(ctx, data, NFT_DATA_VALUE_MAXLEN, desc, attr);
+	if (err < 0)
+		return err;
+
+	if (desc->type != NFT_DATA_VERDICT && desc->len != set->dlen) {
+		nft_data_release(data, desc->type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int nft_get_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 			    const struct nlattr *attr)
 {
@@ -4946,7 +4965,6 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 	struct nft_expr *expr = NULL;
 	struct nft_userdata *udata;
 	struct nft_data_desc desc;
-	struct nft_data data;
 	enum nft_registers dreg;
 	struct nft_trans *trans;
 	u32 flags = 0;
@@ -5072,15 +5090,11 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 	}
 
 	if (nla[NFTA_SET_ELEM_DATA] != NULL) {
-		err = nft_data_init(ctx, &data, sizeof(data), &desc,
-				    nla[NFTA_SET_ELEM_DATA]);
+		err = nft_setelem_parse_data(ctx, set, &desc, &elem.data.val,
+					     nla[NFTA_SET_ELEM_DATA]);
 		if (err < 0)
 			goto err_parse_key_end;
 
-		err = -EINVAL;
-		if (set->dtype != NFT_DATA_VERDICT && desc.len != set->dlen)
-			goto err_parse_data;
-
 		dreg = nft_type_to_reg(set->dtype);
 		list_for_each_entry(binding, &set->bindings, list) {
 			struct nft_ctx bind_ctx = {
@@ -5094,14 +5108,14 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 				continue;
 
 			err = nft_validate_register_store(&bind_ctx, dreg,
-							  &data,
+							  &elem.data.val,
 							  desc.type, desc.len);
 			if (err < 0)
 				goto err_parse_data;
 
 			if (desc.type == NFT_DATA_VERDICT &&
-			    (data.verdict.code == NFT_GOTO ||
-			     data.verdict.code == NFT_JUMP))
+			    (elem.data.val.verdict.code == NFT_GOTO ||
+			     elem.data.val.verdict.code == NFT_JUMP))
 				nft_validate_state_update(ctx->net,
 							  NFT_VALIDATE_NEED);
 		}
@@ -5123,7 +5137,7 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 
 	err = -ENOMEM;
 	elem.priv = nft_set_elem_init(set, &tmpl, elem.key.val.data,
-				      elem.key_end.val.data, data.data,
+				      elem.key_end.val.data, elem.data.val.data,
 				      timeout, expiration, GFP_KERNEL);
 	if (elem.priv == NULL)
 		goto err_parse_data;
@@ -5201,7 +5215,7 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 	nf_tables_set_elem_destroy(ctx, set, elem.priv);
 err_parse_data:
 	if (nla[NFTA_SET_ELEM_DATA] != NULL)
-		nft_data_release(&data, desc.type);
+		nft_data_release(&elem.data.val, desc.type);
 err_parse_key_end:
 	nft_data_release(&elem.key_end.val, NFT_DATA_VALUE);
 err_parse_key:
diff --git a/net/netfilter/nfnetlink_osf.c b/net/netfilter/nfnetlink_osf.c
index 9f5dea0064ea..916a3c7f9eaf 100644
--- a/net/netfilter/nfnetlink_osf.c
+++ b/net/netfilter/nfnetlink_osf.c
@@ -165,12 +165,12 @@ static bool nf_osf_match_one(const struct sk_buff *skb,
 static const struct tcphdr *nf_osf_hdr_ctx_init(struct nf_osf_hdr_ctx *ctx,
 						const struct sk_buff *skb,
 						const struct iphdr *ip,
-						unsigned char *opts)
+						unsigned char *opts,
+						struct tcphdr *_tcph)
 {
 	const struct tcphdr *tcp;
-	struct tcphdr _tcph;
 
-	tcp = skb_header_pointer(skb, ip_hdrlen(skb), sizeof(struct tcphdr), &_tcph);
+	tcp = skb_header_pointer(skb, ip_hdrlen(skb), sizeof(struct tcphdr), _tcph);
 	if (!tcp)
 		return NULL;
 
@@ -205,10 +205,11 @@ nf_osf_match(const struct sk_buff *skb, u_int8_t family,
 	int fmatch = FMATCH_WRONG;
 	struct nf_osf_hdr_ctx ctx;
 	const struct tcphdr *tcp;
+	struct tcphdr _tcph;
 
 	memset(&ctx, 0, sizeof(ctx));
 
-	tcp = nf_osf_hdr_ctx_init(&ctx, skb, ip, opts);
+	tcp = nf_osf_hdr_ctx_init(&ctx, skb, ip, opts, &_tcph);
 	if (!tcp)
 		return false;
 
@@ -265,10 +266,11 @@ bool nf_osf_find(const struct sk_buff *skb,
 	const struct nf_osf_finger *kf;
 	struct nf_osf_hdr_ctx ctx;
 	const struct tcphdr *tcp;
+	struct tcphdr _tcph;
 
 	memset(&ctx, 0, sizeof(ctx));
 
-	tcp = nf_osf_hdr_ctx_init(&ctx, skb, ip, opts);
+	tcp = nf_osf_hdr_ctx_init(&ctx, skb, ip, opts, &_tcph);
 	if (!tcp)
 		return false;
 
diff --git a/net/netfilter/nft_nat.c b/net/netfilter/nft_nat.c
index 8b44a4de5329..23a7bfd10521 100644
--- a/net/netfilter/nft_nat.c
+++ b/net/netfilter/nft_nat.c
@@ -30,6 +30,76 @@ struct nft_nat {
 	u16			flags;
 };
 
+static void nft_nat_setup_addr(struct nf_nat_range2 *range,
+			       const struct nft_regs *regs,
+			       const struct nft_nat *priv)
+{
+	switch (priv->family) {
+	case AF_INET:
+		range->min_addr.ip = (__force __be32)
+				regs->data[priv->sreg_addr_min];
+		range->max_addr.ip = (__force __be32)
+				regs->data[priv->sreg_addr_max];
+		break;
+	case AF_INET6:
+		memcpy(range->min_addr.ip6, &regs->data[priv->sreg_addr_min],
+		       sizeof(range->min_addr.ip6));
+		memcpy(range->max_addr.ip6, &regs->data[priv->sreg_addr_max],
+		       sizeof(range->max_addr.ip6));
+		break;
+	}
+}
+
+static void nft_nat_setup_proto(struct nf_nat_range2 *range,
+				const struct nft_regs *regs,
+				const struct nft_nat *priv)
+{
+	range->min_proto.all = (__force __be16)
+		nft_reg_load16(&regs->data[priv->sreg_proto_min]);
+	range->max_proto.all = (__force __be16)
+		nft_reg_load16(&regs->data[priv->sreg_proto_max]);
+}
+
+static void nft_nat_setup_netmap(struct nf_nat_range2 *range,
+				 const struct nft_pktinfo *pkt,
+				 const struct nft_nat *priv)
+{
+	struct sk_buff *skb = pkt->skb;
+	union nf_inet_addr new_addr;
+	__be32 netmask;
+	int i, len = 0;
+
+	switch (priv->type) {
+	case NFT_NAT_SNAT:
+		if (nft_pf(pkt) == NFPROTO_IPV4) {
+			new_addr.ip = ip_hdr(skb)->saddr;
+			len = sizeof(struct in_addr);
+		} else {
+			new_addr.in6 = ipv6_hdr(skb)->saddr;
+			len = sizeof(struct in6_addr);
+		}
+		break;
+	case NFT_NAT_DNAT:
+		if (nft_pf(pkt) == NFPROTO_IPV4) {
+			new_addr.ip = ip_hdr(skb)->daddr;
+			len = sizeof(struct in_addr);
+		} else {
+			new_addr.in6 = ipv6_hdr(skb)->daddr;
+			len = sizeof(struct in6_addr);
+		}
+		break;
+	}
+
+	for (i = 0; i < len / sizeof(__be32); i++) {
+		netmask = ~(range->min_addr.ip6[i] ^ range->max_addr.ip6[i]);
+		new_addr.ip6[i] &= ~netmask;
+		new_addr.ip6[i] |= range->min_addr.ip6[i] & netmask;
+	}
+
+	range->min_addr = new_addr;
+	range->max_addr = new_addr;
+}
+
 static void nft_nat_eval(const struct nft_expr *expr,
 			 struct nft_regs *regs,
 			 const struct nft_pktinfo *pkt)
@@ -40,33 +110,17 @@ static void nft_nat_eval(const struct nft_expr *expr,
 	struct nf_nat_range2 range;
 
 	memset(&range, 0, sizeof(range));
-	if (priv->sreg_addr_min) {
-		if (priv->family == AF_INET) {
-			range.min_addr.ip = (__force __be32)
-					regs->data[priv->sreg_addr_min];
-			range.max_addr.ip = (__force __be32)
-					regs->data[priv->sreg_addr_max];
 
-		} else {
-			memcpy(range.min_addr.ip6,
-			       &regs->data[priv->sreg_addr_min],
-			       sizeof(range.min_addr.ip6));
-			memcpy(range.max_addr.ip6,
-			       &regs->data[priv->sreg_addr_max],
-			       sizeof(range.max_addr.ip6));
-		}
-		range.flags |= NF_NAT_RANGE_MAP_IPS;
+	if (priv->sreg_addr_min) {
+		nft_nat_setup_addr(&range, regs, priv);
+		if (priv->flags & NF_NAT_RANGE_NETMAP)
+			nft_nat_setup_netmap(&range, pkt, priv);
 	}
 
-	if (priv->sreg_proto_min) {
-		range.min_proto.all = (__force __be16)nft_reg_load16(
-			&regs->data[priv->sreg_proto_min]);
-		range.max_proto.all = (__force __be16)nft_reg_load16(
-			&regs->data[priv->sreg_proto_max]);
-		range.flags |= NF_NAT_RANGE_PROTO_SPECIFIED;
-	}
+	if (priv->sreg_proto_min)
+		nft_nat_setup_proto(&range, regs, priv);
 
-	range.flags |= priv->flags;
+	range.flags = priv->flags;
 
 	regs->verdict.code = nf_nat_setup_info(ct, &range, priv->type);
 }
@@ -129,7 +183,7 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		priv->type = NF_NAT_MANIP_DST;
 		break;
 	default:
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	if (tb[NFTA_NAT_FAMILY] == NULL)
@@ -169,6 +223,8 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		} else {
 			priv->sreg_addr_max = priv->sreg_addr_min;
 		}
+
+		priv->flags |= NF_NAT_RANGE_MAP_IPS;
 	}
 
 	plen = sizeof_field(struct nf_nat_range, min_addr.all);
@@ -191,12 +247,14 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		} else {
 			priv->sreg_proto_max = priv->sreg_proto_min;
 		}
+
+		priv->flags |= NF_NAT_RANGE_PROTO_SPECIFIED;
 	}
 
 	if (tb[NFTA_NAT_FLAGS]) {
-		priv->flags = ntohl(nla_get_be32(tb[NFTA_NAT_FLAGS]));
+		priv->flags |= ntohl(nla_get_be32(tb[NFTA_NAT_FLAGS]));
 		if (priv->flags & ~NF_NAT_RANGE_MASK)
-			return -EINVAL;
+			return -EOPNOTSUPP;
 	}
 
 	return nf_ct_netns_get(ctx->net, family);
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index cd2b034eef59..99a468be4a59 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -1408,15 +1408,9 @@ xt_replace_table(struct xt_table *table,
 		}
 	}
 
-#ifdef CONFIG_AUDIT
-	if (audit_enabled) {
-		audit_log(audit_context(), GFP_KERNEL,
-			  AUDIT_NETFILTER_CFG,
-			  "table=%s family=%u entries=%u",
-			  table->name, table->af, private->number);
-	}
-#endif
-
+	audit_log_nfcfg(table->name, table->af, private->number,
+			!private->number ? AUDIT_XT_OP_REGISTER :
+					   AUDIT_XT_OP_REPLACE);
 	return private;
 }
 EXPORT_SYMBOL_GPL(xt_replace_table);
@@ -1478,6 +1472,8 @@ void *xt_unregister_table(struct xt_table *table)
 	private = table->private;
 	list_del(&table->list);
 	mutex_unlock(&xt[table->af].mutex);
+	audit_log_nfcfg(table->name, table->af, private->number,
+			AUDIT_XT_OP_UNREGISTER);
 	kfree(table);
 
 	return private;
diff --git a/net/openvswitch/datapath.h b/net/openvswitch/datapath.h
index e239a46c2f94..2016dd107939 100644
--- a/net/openvswitch/datapath.h
+++ b/net/openvswitch/datapath.h
@@ -82,7 +82,7 @@ struct datapath {
 	u32 max_headroom;
 
 	/* Switch meters. */
-	struct hlist_head *meters;
+	struct dp_meter_table meter_tbl;
 };
 
 /**
diff --git a/net/openvswitch/meter.c b/net/openvswitch/meter.c
index 5010d1ddd4bd..3d3d8e094546 100644
--- a/net/openvswitch/meter.c
+++ b/net/openvswitch/meter.c
@@ -12,6 +12,7 @@
 #include <linux/openvswitch.h>
 #include <linux/netlink.h>
 #include <linux/rculist.h>
+#include <linux/swap.h>
 
 #include <net/netlink.h>
 #include <net/genetlink.h>
@@ -19,8 +20,6 @@
 #include "datapath.h"
 #include "meter.h"
 
-#define METER_HASH_BUCKETS 1024
-
 static const struct nla_policy meter_policy[OVS_METER_ATTR_MAX + 1] = {
 	[OVS_METER_ATTR_ID] = { .type = NLA_U32, },
 	[OVS_METER_ATTR_KBPS] = { .type = NLA_FLAG },
@@ -39,6 +38,11 @@ static const struct nla_policy band_policy[OVS_BAND_ATTR_MAX + 1] = {
 	[OVS_BAND_ATTR_STATS] = { .len = sizeof(struct ovs_flow_stats) },
 };
 
+static u32 meter_hash(struct dp_meter_instance *ti, u32 id)
+{
+	return id % ti->n_meters;
+}
+
 static void ovs_meter_free(struct dp_meter *meter)
 {
 	if (!meter)
@@ -47,40 +51,162 @@ static void ovs_meter_free(struct dp_meter *meter)
 	kfree_rcu(meter, rcu);
 }
 
-static struct hlist_head *meter_hash_bucket(const struct datapath *dp,
-					    u32 meter_id)
-{
-	return &dp->meters[meter_id & (METER_HASH_BUCKETS - 1)];
-}
-
 /* Call with ovs_mutex or RCU read lock. */
-static struct dp_meter *lookup_meter(const struct datapath *dp,
+static struct dp_meter *lookup_meter(const struct dp_meter_table *tbl,
 				     u32 meter_id)
 {
+	struct dp_meter_instance *ti = rcu_dereference_ovsl(tbl->ti);
+	u32 hash = meter_hash(ti, meter_id);
 	struct dp_meter *meter;
-	struct hlist_head *head;
 
-	head = meter_hash_bucket(dp, meter_id);
-	hlist_for_each_entry_rcu(meter, head, dp_hash_node,
-				lockdep_ovsl_is_held()) {
-		if (meter->id == meter_id)
-			return meter;
-	}
+	meter = rcu_dereference_ovsl(ti->dp_meters[hash]);
+	if (meter && likely(meter->id == meter_id))
+		return meter;
+
 	return NULL;
 }
 
-static void attach_meter(struct datapath *dp, struct dp_meter *meter)
+static struct dp_meter_instance *dp_meter_instance_alloc(const u32 size)
+{
+	struct dp_meter_instance *ti;
+
+	ti = kvzalloc(sizeof(*ti) +
+		      sizeof(struct dp_meter *) * size,
+		      GFP_KERNEL);
+	if (!ti)
+		return NULL;
+
+	ti->n_meters = size;
+
+	return ti;
+}
+
+static void dp_meter_instance_free(struct dp_meter_instance *ti)
+{
+	kvfree(ti);
+}
+
+static void dp_meter_instance_free_rcu(struct rcu_head *rcu)
 {
-	struct hlist_head *head = meter_hash_bucket(dp, meter->id);
+	struct dp_meter_instance *ti;
 
-	hlist_add_head_rcu(&meter->dp_hash_node, head);
+	ti = container_of(rcu, struct dp_meter_instance, rcu);
+	kvfree(ti);
 }
 
-static void detach_meter(struct dp_meter *meter)
+static int
+dp_meter_instance_realloc(struct dp_meter_table *tbl, u32 size)
+{
+	struct dp_meter_instance *ti = rcu_dereference_ovsl(tbl->ti);
+	int n_meters = min(size, ti->n_meters);
+	struct dp_meter_instance *new_ti;
+	int i;
+
+	new_ti = dp_meter_instance_alloc(size);
+	if (!new_ti)
+		return -ENOMEM;
+
+	for (i = 0; i < n_meters; i++)
+		if (rcu_dereference_ovsl(ti->dp_meters[i]))
+			new_ti->dp_meters[i] = ti->dp_meters[i];
+
+	rcu_assign_pointer(tbl->ti, new_ti);
+	call_rcu(&ti->rcu, dp_meter_instance_free_rcu);
+
+	return 0;
+}
+
+static void dp_meter_instance_insert(struct dp_meter_instance *ti,
+				     struct dp_meter *meter)
+{
+	u32 hash;
+
+	hash = meter_hash(ti, meter->id);
+	rcu_assign_pointer(ti->dp_meters[hash], meter);
+}
+
+static void dp_meter_instance_remove(struct dp_meter_instance *ti,
+				     struct dp_meter *meter)
 {
+	u32 hash;
+
+	hash = meter_hash(ti, meter->id);
+	RCU_INIT_POINTER(ti->dp_meters[hash], NULL);
+}
+
+static int attach_meter(struct dp_meter_table *tbl, struct dp_meter *meter)
+{
+	struct dp_meter_instance *ti = rcu_dereference_ovsl(tbl->ti);
+	u32 hash = meter_hash(ti, meter->id);
+	int err;
+
+	/* In generally, slots selected should be empty, because
+	 * OvS uses id-pool to fetch a available id.
+	 */
+	if (unlikely(rcu_dereference_ovsl(ti->dp_meters[hash])))
+		return -EBUSY;
+
+	dp_meter_instance_insert(ti, meter);
+
+	/* That function is thread-safe. */
+	tbl->count++;
+	if (tbl->count >= tbl->max_meters_allowed) {
+		err = -EFBIG;
+		goto attach_err;
+	}
+
+	if (tbl->count >= ti->n_meters &&
+	    dp_meter_instance_realloc(tbl, ti->n_meters * 2)) {
+		err = -ENOMEM;
+		goto attach_err;
+	}
+
+	return 0;
+
+attach_err:
+	dp_meter_instance_remove(ti, meter);
+	tbl->count--;
+	return err;
+}
+
+static int detach_meter(struct dp_meter_table *tbl, struct dp_meter *meter)
+{
+	struct dp_meter_instance *ti;
+
 	ASSERT_OVSL();
-	if (meter)
-		hlist_del_rcu(&meter->dp_hash_node);
+	if (!meter)
+		return 0;
+
+	ti = rcu_dereference_ovsl(tbl->ti);
+	dp_meter_instance_remove(ti, meter);
+
+	tbl->count--;
+
+	/* Shrink the meter array if necessary. */
+	if (ti->n_meters > DP_METER_ARRAY_SIZE_MIN &&
+	    tbl->count <= (ti->n_meters / 4)) {
+		int half_size = ti->n_meters / 2;
+		int i;
+
+		/* Avoid hash collision, don't move slots to other place.
+		 * Make sure there are no references of meters in array
+		 * which will be released.
+		 */
+		for (i = half_size; i < ti->n_meters; i++)
+			if (rcu_dereference_ovsl(ti->dp_meters[i]))
+				goto out;
+
+		if (dp_meter_instance_realloc(tbl, half_size))
+			goto shrink_err;
+	}
+
+out:
+	return 0;
+
+shrink_err:
+	dp_meter_instance_insert(ti, meter);
+	tbl->count++;
+	return -ENOMEM;
 }
 
 static struct sk_buff *
@@ -116,12 +242,11 @@ static int ovs_meter_cmd_reply_stats(struct sk_buff *reply, u32 meter_id,
 	if (nla_put_u32(reply, OVS_METER_ATTR_ID, meter_id))
 		goto error;
 
-	if (!meter)
-		return 0;
-
 	if (nla_put(reply, OVS_METER_ATTR_STATS,
-		    sizeof(struct ovs_flow_stats), &meter->stats) ||
-	    nla_put_u64_64bit(reply, OVS_METER_ATTR_USED, meter->used,
+		    sizeof(struct ovs_flow_stats), &meter->stats))
+		goto error;
+
+	if (nla_put_u64_64bit(reply, OVS_METER_ATTR_USED, meter->used,
 			      OVS_METER_ATTR_PAD))
 		goto error;
 
@@ -150,18 +275,32 @@ static int ovs_meter_cmd_reply_stats(struct sk_buff *reply, u32 meter_id,
 
 static int ovs_meter_cmd_features(struct sk_buff *skb, struct genl_info *info)
 {
-	struct sk_buff *reply;
+	struct ovs_header *ovs_header = info->userhdr;
 	struct ovs_header *ovs_reply_header;
 	struct nlattr *nla, *band_nla;
-	int err;
+	struct sk_buff *reply;
+	struct datapath *dp;
+	int err = -EMSGSIZE;
 
 	reply = ovs_meter_cmd_reply_start(info, OVS_METER_CMD_FEATURES,
 					  &ovs_reply_header);
 	if (IS_ERR(reply))
 		return PTR_ERR(reply);
 
-	if (nla_put_u32(reply, OVS_METER_ATTR_MAX_METERS, U32_MAX) ||
-	    nla_put_u32(reply, OVS_METER_ATTR_MAX_BANDS, DP_MAX_BANDS))
+	ovs_lock();
+	dp = get_dp(sock_net(skb->sk), ovs_header->dp_ifindex);
+	if (!dp) {
+		err = -ENODEV;
+		goto exit_unlock;
+	}
+
+	if (nla_put_u32(reply, OVS_METER_ATTR_MAX_METERS,
+			dp->meter_tbl.max_meters_allowed))
+		goto exit_unlock;
+
+	ovs_unlock();
+
+	if (nla_put_u32(reply, OVS_METER_ATTR_MAX_BANDS, DP_MAX_BANDS))
 		goto nla_put_failure;
 
 	nla = nla_nest_start_noflag(reply, OVS_METER_ATTR_BANDS);
@@ -180,9 +319,10 @@ static int ovs_meter_cmd_features(struct sk_buff *skb, struct genl_info *info)
 	genlmsg_end(reply, ovs_reply_header);
 	return genlmsg_reply(reply, info);
 
+exit_unlock:
+	ovs_unlock();
 nla_put_failure:
 	nlmsg_free(reply);
-	err = -EMSGSIZE;
 	return err;
 }
 
@@ -252,8 +392,8 @@ static struct dp_meter *dp_meter_create(struct nlattr **a)
 		 *
 		 * Start with a full bucket.
 		 */
-		band->bucket = (band->burst_size + band->rate) * 1000;
-		band_max_delta_t = band->bucket / band->rate;
+		band->bucket = (band->burst_size + band->rate) * 1000ULL;
+		band_max_delta_t = div_u64(band->bucket, band->rate);
 		if (band_max_delta_t > meter->max_delta_t)
 			meter->max_delta_t = band_max_delta_t;
 		band++;
@@ -273,14 +413,14 @@ static int ovs_meter_cmd_set(struct sk_buff *skb, struct genl_info *info)
 	struct sk_buff *reply;
 	struct ovs_header *ovs_reply_header;
 	struct ovs_header *ovs_header = info->userhdr;
+	struct dp_meter_table *meter_tbl;
 	struct datapath *dp;
 	int err;
 	u32 meter_id;
 	bool failed;
 
-	if (!a[OVS_METER_ATTR_ID]) {
-		return -ENODEV;
-	}
+	if (!a[OVS_METER_ATTR_ID])
+		return -EINVAL;
 
 	meter = dp_meter_create(a);
 	if (IS_ERR_OR_NULL(meter))
@@ -300,12 +440,18 @@ static int ovs_meter_cmd_set(struct sk_buff *skb, struct genl_info *info)
 		goto exit_unlock;
 	}
 
+	meter_tbl = &dp->meter_tbl;
 	meter_id = nla_get_u32(a[OVS_METER_ATTR_ID]);
 
-	/* Cannot fail after this. */
-	old_meter = lookup_meter(dp, meter_id);
-	detach_meter(old_meter);
-	attach_meter(dp, meter);
+	old_meter = lookup_meter(meter_tbl, meter_id);
+	err = detach_meter(meter_tbl, old_meter);
+	if (err)
+		goto exit_unlock;
+
+	err = attach_meter(meter_tbl, meter);
+	if (err)
+		goto exit_unlock;
+
 	ovs_unlock();
 
 	/* Build response with the meter_id and stats from
@@ -337,14 +483,14 @@ static int ovs_meter_cmd_set(struct sk_buff *skb, struct genl_info *info)
 
 static int ovs_meter_cmd_get(struct sk_buff *skb, struct genl_info *info)
 {
-	struct nlattr **a = info->attrs;
-	u32 meter_id;
 	struct ovs_header *ovs_header = info->userhdr;
 	struct ovs_header *ovs_reply_header;
+	struct nlattr **a = info->attrs;
+	struct dp_meter *meter;
+	struct sk_buff *reply;
 	struct datapath *dp;
+	u32 meter_id;
 	int err;
-	struct sk_buff *reply;
-	struct dp_meter *meter;
 
 	if (!a[OVS_METER_ATTR_ID])
 		return -EINVAL;
@@ -365,7 +511,7 @@ static int ovs_meter_cmd_get(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	/* Locate meter, copy stats. */
-	meter = lookup_meter(dp, meter_id);
+	meter = lookup_meter(&dp->meter_tbl, meter_id);
 	if (!meter) {
 		err = -ENOENT;
 		goto exit_unlock;
@@ -390,18 +536,17 @@ static int ovs_meter_cmd_get(struct sk_buff *skb, struct genl_info *info)
 
 static int ovs_meter_cmd_del(struct sk_buff *skb, struct genl_info *info)
 {
-	struct nlattr **a = info->attrs;
-	u32 meter_id;
 	struct ovs_header *ovs_header = info->userhdr;
 	struct ovs_header *ovs_reply_header;
+	struct nlattr **a = info->attrs;
+	struct dp_meter *old_meter;
+	struct sk_buff *reply;
 	struct datapath *dp;
+	u32 meter_id;
 	int err;
-	struct sk_buff *reply;
-	struct dp_meter *old_meter;
 
 	if (!a[OVS_METER_ATTR_ID])
 		return -EINVAL;
-	meter_id = nla_get_u32(a[OVS_METER_ATTR_ID]);
 
 	reply = ovs_meter_cmd_reply_start(info, OVS_METER_CMD_DEL,
 					  &ovs_reply_header);
@@ -416,14 +561,19 @@ static int ovs_meter_cmd_del(struct sk_buff *skb, struct genl_info *info)
 		goto exit_unlock;
 	}
 
-	old_meter = lookup_meter(dp, meter_id);
+	meter_id = nla_get_u32(a[OVS_METER_ATTR_ID]);
+	old_meter = lookup_meter(&dp->meter_tbl, meter_id);
 	if (old_meter) {
 		spin_lock_bh(&old_meter->lock);
 		err = ovs_meter_cmd_reply_stats(reply, meter_id, old_meter);
 		WARN_ON(err);
 		spin_unlock_bh(&old_meter->lock);
-		detach_meter(old_meter);
+
+		err = detach_meter(&dp->meter_tbl, old_meter);
+		if (err)
+			goto exit_unlock;
 	}
+
 	ovs_unlock();
 	ovs_meter_free(old_meter);
 	genlmsg_end(reply, ovs_reply_header);
@@ -443,16 +593,16 @@ static int ovs_meter_cmd_del(struct sk_buff *skb, struct genl_info *info)
 bool ovs_meter_execute(struct datapath *dp, struct sk_buff *skb,
 		       struct sw_flow_key *key, u32 meter_id)
 {
-	struct dp_meter *meter;
-	struct dp_meter_band *band;
 	long long int now_ms = div_u64(ktime_get_ns(), 1000 * 1000);
 	long long int long_delta_ms;
-	u32 delta_ms;
-	u32 cost;
+	struct dp_meter_band *band;
+	struct dp_meter *meter;
 	int i, band_exceeded_max = -1;
 	u32 band_exceeded_rate = 0;
+	u32 delta_ms;
+	u32 cost;
 
-	meter = lookup_meter(dp, meter_id);
+	meter = lookup_meter(&dp->meter_tbl, meter_id);
 	/* Do not drop the packet when there is no meter. */
 	if (!meter)
 		return false;
@@ -570,32 +720,39 @@ struct genl_family dp_meter_genl_family __ro_after_init = {
 
 int ovs_meters_init(struct datapath *dp)
 {
-	int i;
-
-	dp->meters = kmalloc_array(METER_HASH_BUCKETS,
-				   sizeof(struct hlist_head), GFP_KERNEL);
+	struct dp_meter_table *tbl = &dp->meter_tbl;
+	struct dp_meter_instance *ti;
+	unsigned long free_mem_bytes;
 
-	if (!dp->meters)
+	ti = dp_meter_instance_alloc(DP_METER_ARRAY_SIZE_MIN);
+	if (!ti)
 		return -ENOMEM;
 
-	for (i = 0; i < METER_HASH_BUCKETS; i++)
-		INIT_HLIST_HEAD(&dp->meters[i]);
+	/* Allow meters in a datapath to use ~3.12% of physical memory. */
+	free_mem_bytes = nr_free_buffer_pages() * (PAGE_SIZE >> 5);
+	tbl->max_meters_allowed = min(free_mem_bytes / sizeof(struct dp_meter),
+				      DP_METER_NUM_MAX);
+	if (!tbl->max_meters_allowed)
+		goto out_err;
+
+	rcu_assign_pointer(tbl->ti, ti);
+	tbl->count = 0;
 
 	return 0;
+
+out_err:
+	dp_meter_instance_free(ti);
+	return -ENOMEM;
 }
 
 void ovs_meters_exit(struct datapath *dp)
 {
+	struct dp_meter_table *tbl = &dp->meter_tbl;
+	struct dp_meter_instance *ti = rcu_dereference_raw(tbl->ti);
 	int i;
 
-	for (i = 0; i < METER_HASH_BUCKETS; i++) {
-		struct hlist_head *head = &dp->meters[i];
-		struct dp_meter *meter;
-		struct hlist_node *n;
-
-		hlist_for_each_entry_safe(meter, n, head, dp_hash_node)
-			kfree(meter);
-	}
+	for (i = 0; i < ti->n_meters; i++)
+		ovs_meter_free(rcu_dereference_raw(ti->dp_meters[i]));
 
-	kfree(dp->meters);
+	dp_meter_instance_free(ti);
 }
diff --git a/net/openvswitch/meter.h b/net/openvswitch/meter.h
index f645913870bd..0c33889a8515 100644
--- a/net/openvswitch/meter.h
+++ b/net/openvswitch/meter.h
@@ -13,26 +13,26 @@
 #include <linux/openvswitch.h>
 #include <linux/genetlink.h>
 #include <linux/skbuff.h>
+#include <linux/bits.h>
 
 #include "flow.h"
 struct datapath;
 
 #define DP_MAX_BANDS		1
+#define DP_METER_ARRAY_SIZE_MIN	BIT_ULL(10)
+#define DP_METER_NUM_MAX	(200000UL)
 
 struct dp_meter_band {
 	u32 type;
 	u32 rate;
 	u32 burst_size;
-	u32 bucket; /* 1/1000 packets, or in bits */
+	u64 bucket; /* 1/1000 packets, or in bits */
 	struct ovs_flow_stats stats;
 };
 
 struct dp_meter {
 	spinlock_t lock;    /* Per meter lock */
 	struct rcu_head rcu;
-	struct hlist_node dp_hash_node; /*Element in datapath->meters
-					 * hash table.
-					 */
 	u32 id;
 	u16 kbps:1, keep_stats:1;
 	u16 n_bands;
@@ -42,6 +42,18 @@ struct dp_meter {
 	struct dp_meter_band bands[];
 };
 
+struct dp_meter_instance {
+	struct rcu_head rcu;
+	u32 n_meters;
+	struct dp_meter __rcu *dp_meters[];
+};
+
+struct dp_meter_table {
+	struct dp_meter_instance __rcu *ti;
+	u32 count;
+	u32 max_meters_allowed;
+};
+
 extern struct genl_family dp_meter_genl_family;
 int ovs_meters_init(struct datapath *dp);
 void ovs_meters_exit(struct datapath *dp);
diff --git a/net/phonet/sysctl.c b/net/phonet/sysctl.c
index 251e750fd9aa..0d0bf41381c2 100644
--- a/net/phonet/sysctl.c
+++ b/net/phonet/sysctl.c
@@ -49,8 +49,7 @@ void phonet_get_local_port_range(int *min, int *max)
 }
 
 static int proc_local_port_range(struct ctl_table *table, int write,
-				void __user *buffer,
-				size_t *lenp, loff_t *ppos)
+				 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 	int range[2] = {local_port_range[0], local_port_range[1]};
diff --git a/net/qrtr/ns.c b/net/qrtr/ns.c
index e7d0fe3f4330..3ca196fc7f9b 100644
--- a/net/qrtr/ns.c
+++ b/net/qrtr/ns.c
@@ -12,6 +12,9 @@
 
 #include "qrtr.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/qrtr.h>
+
 static RADIX_TREE(nodes, GFP_KERNEL);
 
 static struct {
@@ -105,8 +108,8 @@ static int service_announce_new(struct sockaddr_qrtr *dest,
 	struct msghdr msg = { };
 	struct kvec iv;
 
-	trace_printk("advertising new server [%d:%x]@[%d:%d]\n",
-		     srv->service, srv->instance, srv->node, srv->port);
+	trace_qrtr_ns_service_announce_new(srv->service, srv->instance,
+					   srv->node, srv->port);
 
 	iv.iov_base = &pkt;
 	iv.iov_len = sizeof(pkt);
@@ -132,8 +135,8 @@ static int service_announce_del(struct sockaddr_qrtr *dest,
 	struct kvec iv;
 	int ret;
 
-	trace_printk("advertising removal of server [%d:%x]@[%d:%d]\n",
-		     srv->service, srv->instance, srv->node, srv->port);
+	trace_qrtr_ns_service_announce_del(srv->service, srv->instance,
+					   srv->node, srv->port);
 
 	iv.iov_base = &pkt;
 	iv.iov_len = sizeof(pkt);
@@ -244,8 +247,8 @@ static struct qrtr_server *server_add(unsigned int service,
 
 	radix_tree_insert(&node->servers, port, srv);
 
-	trace_printk("add server [%d:%x]@[%d:%d]\n", srv->service,
-		     srv->instance, srv->node, srv->port);
+	trace_qrtr_ns_server_add(srv->service, srv->instance,
+				 srv->node, srv->port);
 
 	return srv;
 
@@ -633,9 +636,8 @@ static void qrtr_ns_worker(struct work_struct *work)
 		cmd = le32_to_cpu(pkt->cmd);
 		if (cmd < ARRAY_SIZE(qrtr_ctrl_pkt_strings) &&
 		    qrtr_ctrl_pkt_strings[cmd])
-			trace_printk("%s from %d:%d\n",
-				     qrtr_ctrl_pkt_strings[cmd], sq.sq_node,
-				     sq.sq_port);
+			trace_qrtr_ns_message(qrtr_ctrl_pkt_strings[cmd],
+					      sq.sq_node, sq.sq_port);
 
 		ret = 0;
 		switch (cmd) {
diff --git a/net/rds/tcp.c b/net/rds/tcp.c
index 66121bc6f34e..46782fac4c16 100644
--- a/net/rds/tcp.c
+++ b/net/rds/tcp.c
@@ -62,8 +62,7 @@ static atomic_t rds_tcp_unloading = ATOMIC_INIT(0);
 static struct kmem_cache *rds_tcp_conn_slab;
 
 static int rds_tcp_skbuf_handler(struct ctl_table *ctl, int write,
-				 void __user *buffer, size_t *lenp,
-				 loff_t *fpos);
+				 void *buffer, size_t *lenp, loff_t *fpos);
 
 static int rds_tcp_min_sndbuf = SOCK_MIN_SNDBUF;
 static int rds_tcp_min_rcvbuf = SOCK_MIN_RCVBUF;
@@ -676,8 +675,7 @@ static void rds_tcp_sysctl_reset(struct net *net)
 }
 
 static int rds_tcp_skbuf_handler(struct ctl_table *ctl, int write,
-				 void __user *buffer, size_t *lenp,
-				 loff_t *fpos)
+				 void *buffer, size_t *lenp, loff_t *fpos)
 {
 	struct net *net = current->nsproxy->net_ns;
 	int err;
diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c
index 1a766393be62..9adff83b523b 100644
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -30,6 +30,7 @@
 #include <net/netfilter/nf_conntrack_core.h>
 #include <net/netfilter/nf_conntrack_zones.h>
 #include <net/netfilter/nf_conntrack_helper.h>
+#include <net/netfilter/nf_conntrack_acct.h>
 #include <net/netfilter/ipv6/nf_defrag_ipv6.h>
 #include <uapi/linux/netfilter/nf_nat.h>
 
@@ -536,6 +537,7 @@ static bool tcf_ct_flow_table_lookup(struct tcf_ct_params *p,
 	flow_offload_refresh(nf_ft, flow);
 	nf_conntrack_get(&ct->ct_general);
 	nf_ct_set(skb, ct, ctinfo);
+	nf_ct_acct_update(ct, dir, skb->len);
 
 	return true;
 }
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 55bd1429678f..11b683c45c28 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -735,8 +735,11 @@ static int tcf_block_offload_cmd(struct tcf_block *block,
 	INIT_LIST_HEAD(&bo.cb_list);
 
 	err = dev->netdev_ops->ndo_setup_tc(dev, TC_SETUP_BLOCK, &bo);
-	if (err < 0)
+	if (err < 0) {
+		if (err != -EOPNOTSUPP)
+			NL_SET_ERR_MSG(extack, "Driver ndo_setup_tc failed");
 		return err;
+	}
 
 	return tcf_block_setup(block, &bo);
 }
diff --git a/net/sched/em_ipt.c b/net/sched/em_ipt.c
index eecfe072c508..18755d29fd15 100644
--- a/net/sched/em_ipt.c
+++ b/net/sched/em_ipt.c
@@ -199,7 +199,7 @@ static void em_ipt_destroy(struct tcf_ematch *em)
 		im->match->destroy(&par);
 	}
 	module_put(im->match->me);
-	kfree((void *)im);
+	kfree(im);
 }
 
 static int em_ipt_match(struct sk_buff *skb, struct tcf_ematch *em,
diff --git a/net/sched/sch_choke.c b/net/sched/sch_choke.c
index a36974e9c601..1bcf8fbfd40e 100644
--- a/net/sched/sch_choke.c
+++ b/net/sched/sch_choke.c
@@ -323,7 +323,8 @@ static void choke_reset(struct Qdisc *sch)
 
 	sch->q.qlen = 0;
 	sch->qstats.backlog = 0;
-	memset(q->tab, 0, (q->tab_mask + 1) * sizeof(struct sk_buff *));
+	if (q->tab)
+		memset(q->tab, 0, (q->tab_mask + 1) * sizeof(struct sk_buff *));
 	q->head = q->tail = 0;
 	red_restart(&q->vars);
 }
diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c
index 968519ff36e9..436160be9c18 100644
--- a/net/sched/sch_fq_codel.c
+++ b/net/sched/sch_fq_codel.c
@@ -416,7 +416,7 @@ static int fq_codel_change(struct Qdisc *sch, struct nlattr *opt,
 		q->quantum = max(256U, nla_get_u32(tb[TCA_FQ_CODEL_QUANTUM]));
 
 	if (tb[TCA_FQ_CODEL_DROP_BATCH_SIZE])
-		q->drop_batch_size = min(1U, nla_get_u32(tb[TCA_FQ_CODEL_DROP_BATCH_SIZE]));
+		q->drop_batch_size = max(1U, nla_get_u32(tb[TCA_FQ_CODEL_DROP_BATCH_SIZE]));
 
 	if (tb[TCA_FQ_CODEL_MEMORY_LIMIT])
 		q->memory_limit = min(1U << 31, nla_get_u32(tb[TCA_FQ_CODEL_MEMORY_LIMIT]));
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index c787d4d46017..5a6def5e4e6d 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -637,6 +637,15 @@ static int sfq_change(struct Qdisc *sch, struct nlattr *opt)
 	if (ctl->divisor &&
 	    (!is_power_of_2(ctl->divisor) || ctl->divisor > 65536))
 		return -EINVAL;
+
+	/* slot->allot is a short, make sure quantum is not too big. */
+	if (ctl->quantum) {
+		unsigned int scaled = SFQ_ALLOT_SIZE(ctl->quantum);
+
+		if (scaled <= 0 || scaled > SHRT_MAX)
+			return -EINVAL;
+	}
+
 	if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max,
 					ctl_v1->Wlog))
 		return -EINVAL;
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index 4740aa70e652..c16c80963e55 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -43,20 +43,15 @@ static unsigned long max_autoclose_max =
 	? UINT_MAX : MAX_SCHEDULE_TIMEOUT / HZ;
 
 static int proc_sctp_do_hmac_alg(struct ctl_table *ctl, int write,
-				void __user *buffer, size_t *lenp,
-				loff_t *ppos);
+				 void *buffer, size_t *lenp, loff_t *ppos);
 static int proc_sctp_do_rto_min(struct ctl_table *ctl, int write,
-				void __user *buffer, size_t *lenp,
-				loff_t *ppos);
-static int proc_sctp_do_rto_max(struct ctl_table *ctl, int write,
-				void __user *buffer, size_t *lenp,
-				loff_t *ppos);
+				void *buffer, size_t *lenp, loff_t *ppos);
+static int proc_sctp_do_rto_max(struct ctl_table *ctl, int write, void *buffer,
+				size_t *lenp, loff_t *ppos);
 static int proc_sctp_do_alpha_beta(struct ctl_table *ctl, int write,
-				   void __user *buffer, size_t *lenp,
-				   loff_t *ppos);
+				   void *buffer, size_t *lenp, loff_t *ppos);
 static int proc_sctp_do_auth(struct ctl_table *ctl, int write,
-			     void __user *buffer, size_t *lenp,
-			     loff_t *ppos);
+			     void *buffer, size_t *lenp, loff_t *ppos);
 
 static struct ctl_table sctp_table[] = {
 	{
@@ -343,8 +338,7 @@ static struct ctl_table sctp_net_table[] = {
 };
 
 static int proc_sctp_do_hmac_alg(struct ctl_table *ctl, int write,
-				void __user *buffer, size_t *lenp,
-				loff_t *ppos)
+				 void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net = current->nsproxy->net_ns;
 	struct ctl_table tbl;
@@ -389,8 +383,7 @@ static int proc_sctp_do_hmac_alg(struct ctl_table *ctl, int write,
 }
 
 static int proc_sctp_do_rto_min(struct ctl_table *ctl, int write,
-				void __user *buffer, size_t *lenp,
-				loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net = current->nsproxy->net_ns;
 	unsigned int min = *(unsigned int *) ctl->extra1;
@@ -418,8 +411,7 @@ static int proc_sctp_do_rto_min(struct ctl_table *ctl, int write,
 }
 
 static int proc_sctp_do_rto_max(struct ctl_table *ctl, int write,
-				void __user *buffer, size_t *lenp,
-				loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net = current->nsproxy->net_ns;
 	unsigned int min = *(unsigned int *) ctl->extra1;
@@ -447,8 +439,7 @@ static int proc_sctp_do_rto_max(struct ctl_table *ctl, int write,
 }
 
 static int proc_sctp_do_alpha_beta(struct ctl_table *ctl, int write,
-				   void __user *buffer, size_t *lenp,
-				   loff_t *ppos)
+				   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (write)
 		pr_warn_once("Changing rto_alpha or rto_beta may lead to "
@@ -458,8 +449,7 @@ static int proc_sctp_do_alpha_beta(struct ctl_table *ctl, int write,
 }
 
 static int proc_sctp_do_auth(struct ctl_table *ctl, int write,
-			     void __user *buffer, size_t *lenp,
-			     loff_t *ppos)
+			     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct net *net = current->nsproxy->net_ns;
 	struct ctl_table tbl;
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 6fd44bdb0fc3..e859e3f420d9 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -338,36 +338,53 @@ static void smc_copy_sock_settings_to_smc(struct smc_sock *smc)
 }
 
 /* register a new rmb, send confirm_rkey msg to register with peer */
-static int smc_reg_rmb(struct smc_link *link, struct smc_buf_desc *rmb_desc,
-		       bool conf_rkey)
+static int smcr_link_reg_rmb(struct smc_link *link,
+			     struct smc_buf_desc *rmb_desc, bool conf_rkey)
 {
-	if (!rmb_desc->wr_reg) {
+	if (!rmb_desc->is_reg_mr[link->link_idx]) {
 		/* register memory region for new rmb */
-		if (smc_wr_reg_send(link, rmb_desc->mr_rx[SMC_SINGLE_LINK])) {
-			rmb_desc->regerr = 1;
+		if (smc_wr_reg_send(link, rmb_desc->mr_rx[link->link_idx])) {
+			rmb_desc->is_reg_err = true;
 			return -EFAULT;
 		}
-		rmb_desc->wr_reg = 1;
+		rmb_desc->is_reg_mr[link->link_idx] = true;
 	}
 	if (!conf_rkey)
 		return 0;
+
 	/* exchange confirm_rkey msg with peer */
-	if (smc_llc_do_confirm_rkey(link, rmb_desc)) {
-		rmb_desc->regerr = 1;
-		return -EFAULT;
+	if (!rmb_desc->is_conf_rkey) {
+		if (smc_llc_do_confirm_rkey(link, rmb_desc)) {
+			rmb_desc->is_reg_err = true;
+			return -EFAULT;
+		}
+		rmb_desc->is_conf_rkey = true;
 	}
 	return 0;
 }
 
-static int smc_clnt_conf_first_link(struct smc_sock *smc)
+/* register the new rmb on all links */
+static int smcr_lgr_reg_rmbs(struct smc_link_group *lgr,
+			     struct smc_buf_desc *rmb_desc)
 {
-	struct net *net = sock_net(smc->clcsock->sk);
-	struct smc_link_group *lgr = smc->conn.lgr;
-	struct smc_link *link;
+	int i, rc;
+
+	for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+		if (lgr->lnk[i].state != SMC_LNK_ACTIVE)
+			continue;
+		rc = smcr_link_reg_rmb(&lgr->lnk[i], rmb_desc, true);
+		if (rc)
+			return rc;
+	}
+	return 0;
+}
+
+static int smcr_clnt_conf_first_link(struct smc_sock *smc)
+{
+	struct smc_link *link = smc->conn.lnk;
 	int rest;
 	int rc;
 
-	link = &lgr->lnk[SMC_SINGLE_LINK];
 	/* receive CONFIRM LINK request from server over RoCE fabric */
 	rest = wait_for_completion_interruptible_timeout(
 		&link->llc_confirm,
@@ -389,7 +406,7 @@ static int smc_clnt_conf_first_link(struct smc_sock *smc)
 
 	smc_wr_remember_qp_attr(link);
 
-	if (smc_reg_rmb(link, smc->conn.rmb_desc, false))
+	if (smcr_link_reg_rmb(link, smc->conn.rmb_desc, false))
 		return SMC_CLC_DECL_ERR_REGRMB;
 
 	/* send CONFIRM LINK response over RoCE fabric */
@@ -415,7 +432,7 @@ static int smc_clnt_conf_first_link(struct smc_sock *smc)
 	if (rc < 0)
 		return SMC_CLC_DECL_TIMEOUT_AL;
 
-	smc_llc_link_active(link, net->ipv4.sysctl_tcp_keepalive_time);
+	smc_llc_link_active(link);
 
 	return 0;
 }
@@ -610,7 +627,7 @@ static int smc_connect_rdma(struct smc_sock *smc,
 		mutex_unlock(&smc_client_lgr_pending);
 		return reason_code;
 	}
-	link = &smc->conn.lgr->lnk[SMC_SINGLE_LINK];
+	link = smc->conn.lnk;
 
 	smc_conn_save_peer_info(smc, aclc);
 
@@ -622,7 +639,7 @@ static int smc_connect_rdma(struct smc_sock *smc,
 	if (ini->cln_first_contact == SMC_FIRST_CONTACT)
 		smc_link_save_peer_info(link, aclc);
 
-	if (smc_rmb_rtoken_handling(&smc->conn, aclc))
+	if (smc_rmb_rtoken_handling(&smc->conn, link, aclc))
 		return smc_connect_abort(smc, SMC_CLC_DECL_ERR_RTOK,
 					 ini->cln_first_contact);
 
@@ -634,7 +651,7 @@ static int smc_connect_rdma(struct smc_sock *smc,
 			return smc_connect_abort(smc, SMC_CLC_DECL_ERR_RDYLNK,
 						 ini->cln_first_contact);
 	} else {
-		if (smc_reg_rmb(link, smc->conn.rmb_desc, true))
+		if (smcr_lgr_reg_rmbs(smc->conn.lgr, smc->conn.rmb_desc))
 			return smc_connect_abort(smc, SMC_CLC_DECL_ERR_REGRMB,
 						 ini->cln_first_contact);
 	}
@@ -649,7 +666,7 @@ static int smc_connect_rdma(struct smc_sock *smc,
 
 	if (ini->cln_first_contact == SMC_FIRST_CONTACT) {
 		/* QP confirmation over RoCE fabric */
-		reason_code = smc_clnt_conf_first_link(smc);
+		reason_code = smcr_clnt_conf_first_link(smc);
 		if (reason_code)
 			return smc_connect_abort(smc, reason_code,
 						 ini->cln_first_contact);
@@ -999,17 +1016,13 @@ void smc_close_non_accepted(struct sock *sk)
 	sock_put(sk); /* final sock_put */
 }
 
-static int smc_serv_conf_first_link(struct smc_sock *smc)
+static int smcr_serv_conf_first_link(struct smc_sock *smc)
 {
-	struct net *net = sock_net(smc->clcsock->sk);
-	struct smc_link_group *lgr = smc->conn.lgr;
-	struct smc_link *link;
+	struct smc_link *link = smc->conn.lnk;
 	int rest;
 	int rc;
 
-	link = &lgr->lnk[SMC_SINGLE_LINK];
-
-	if (smc_reg_rmb(link, smc->conn.rmb_desc, false))
+	if (smcr_link_reg_rmb(link, smc->conn.rmb_desc, false))
 		return SMC_CLC_DECL_ERR_REGRMB;
 
 	/* send CONFIRM LINK request to client over the RoCE fabric */
@@ -1050,7 +1063,7 @@ static int smc_serv_conf_first_link(struct smc_sock *smc)
 		return rc == -EAGAIN ? SMC_CLC_DECL_TIMEOUT_AL : rc;
 	}
 
-	smc_llc_link_active(link, net->ipv4.sysctl_tcp_keepalive_time);
+	smc_llc_link_active(link);
 
 	return 0;
 }
@@ -1194,10 +1207,10 @@ static int smc_listen_ism_init(struct smc_sock *new_smc,
 /* listen worker: register buffers */
 static int smc_listen_rdma_reg(struct smc_sock *new_smc, int local_contact)
 {
-	struct smc_link *link = &new_smc->conn.lgr->lnk[SMC_SINGLE_LINK];
+	struct smc_connection *conn = &new_smc->conn;
 
 	if (local_contact != SMC_FIRST_CONTACT) {
-		if (smc_reg_rmb(link, new_smc->conn.rmb_desc, true))
+		if (smcr_lgr_reg_rmbs(conn->lgr, conn->rmb_desc))
 			return SMC_CLC_DECL_ERR_REGRMB;
 	}
 	smc_rmb_sync_sg_for_device(&new_smc->conn);
@@ -1210,13 +1223,13 @@ static int smc_listen_rdma_finish(struct smc_sock *new_smc,
 				  struct smc_clc_msg_accept_confirm *cclc,
 				  int local_contact)
 {
-	struct smc_link *link = &new_smc->conn.lgr->lnk[SMC_SINGLE_LINK];
+	struct smc_link *link = new_smc->conn.lnk;
 	int reason_code = 0;
 
 	if (local_contact == SMC_FIRST_CONTACT)
 		smc_link_save_peer_info(link, cclc);
 
-	if (smc_rmb_rtoken_handling(&new_smc->conn, cclc)) {
+	if (smc_rmb_rtoken_handling(&new_smc->conn, link, cclc)) {
 		reason_code = SMC_CLC_DECL_ERR_RTOK;
 		goto decline;
 	}
@@ -1227,7 +1240,7 @@ static int smc_listen_rdma_finish(struct smc_sock *new_smc,
 			goto decline;
 		}
 		/* QP confirmation over RoCE fabric */
-		reason_code = smc_serv_conf_first_link(new_smc);
+		reason_code = smcr_serv_conf_first_link(new_smc);
 		if (reason_code)
 			goto decline;
 	}
diff --git a/net/smc/smc.h b/net/smc/smc.h
index be11ba41190f..1a084afa7372 100644
--- a/net/smc/smc.h
+++ b/net/smc/smc.h
@@ -121,6 +121,7 @@ enum smc_urg_state {
 struct smc_connection {
 	struct rb_node		alert_node;
 	struct smc_link_group	*lgr;		/* link group of connection */
+	struct smc_link		*lnk;		/* assigned SMC-R link */
 	u32			alert_token_local; /* unique conn. id */
 	u8			peer_rmbe_idx;	/* from tcp handshake */
 	int			peer_rmbe_size;	/* size of peer rx buffer */
diff --git a/net/smc/smc_cdc.c b/net/smc/smc_cdc.c
index 164f1584861b..f64589d823aa 100644
--- a/net/smc/smc_cdc.c
+++ b/net/smc/smc_cdc.c
@@ -57,7 +57,7 @@ int smc_cdc_get_free_slot(struct smc_connection *conn,
 			  struct smc_rdma_wr **wr_rdma_buf,
 			  struct smc_cdc_tx_pend **pend)
 {
-	struct smc_link *link = &conn->lgr->lnk[SMC_SINGLE_LINK];
+	struct smc_link *link = conn->lnk;
 	int rc;
 
 	rc = smc_wr_tx_get_free_slot(link, smc_cdc_tx_handler, wr_buf,
@@ -91,12 +91,10 @@ int smc_cdc_msg_send(struct smc_connection *conn,
 		     struct smc_wr_buf *wr_buf,
 		     struct smc_cdc_tx_pend *pend)
 {
+	struct smc_link *link = conn->lnk;
 	union smc_host_cursor cfed;
-	struct smc_link *link;
 	int rc;
 
-	link = &conn->lgr->lnk[SMC_SINGLE_LINK];
-
 	smc_cdc_add_pending_send(conn, pend);
 
 	conn->tx_cdc_seq++;
@@ -165,7 +163,7 @@ static void smc_cdc_tx_dismisser(struct smc_wr_tx_pend_priv *tx_pend)
 
 void smc_cdc_tx_dismiss_slots(struct smc_connection *conn)
 {
-	struct smc_link *link = &conn->lgr->lnk[SMC_SINGLE_LINK];
+	struct smc_link *link = conn->lnk;
 
 	smc_wr_tx_dismiss_slots(link, SMC_CDC_MSG_TYPE,
 				smc_cdc_tx_filter, smc_cdc_tx_dismisser,
diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c
index ea0068f0173c..d5627df24215 100644
--- a/net/smc/smc_clc.c
+++ b/net/smc/smc_clc.c
@@ -496,7 +496,7 @@ int smc_clc_send_confirm(struct smc_sock *smc)
 		       sizeof(SMCD_EYECATCHER));
 	} else {
 		/* SMC-R specific settings */
-		link = &conn->lgr->lnk[SMC_SINGLE_LINK];
+		link = conn->lnk;
 		memcpy(cclc.hdr.eyecatcher, SMC_EYECATCHER,
 		       sizeof(SMC_EYECATCHER));
 		cclc.hdr.path = SMC_TYPE_R;
@@ -508,13 +508,13 @@ int smc_clc_send_confirm(struct smc_sock *smc)
 		       ETH_ALEN);
 		hton24(cclc.qpn, link->roce_qp->qp_num);
 		cclc.rmb_rkey =
-			htonl(conn->rmb_desc->mr_rx[SMC_SINGLE_LINK]->rkey);
+			htonl(conn->rmb_desc->mr_rx[link->link_idx]->rkey);
 		cclc.rmbe_idx = 1; /* for now: 1 RMB = 1 RMBE */
 		cclc.rmbe_alert_token = htonl(conn->alert_token_local);
 		cclc.qp_mtu = min(link->path_mtu, link->peer_mtu);
 		cclc.rmbe_size = conn->rmbe_size_short;
 		cclc.rmb_dma_addr = cpu_to_be64((u64)sg_dma_address
-				(conn->rmb_desc->sgt[SMC_SINGLE_LINK].sgl));
+				(conn->rmb_desc->sgt[link->link_idx].sgl));
 		hton24(cclc.psn, link->psn_initial);
 		memcpy(cclc.smcr_trl.eyecatcher, SMC_EYECATCHER,
 		       sizeof(SMC_EYECATCHER));
@@ -572,7 +572,7 @@ int smc_clc_send_accept(struct smc_sock *new_smc, int srv_first_contact)
 		memcpy(aclc.hdr.eyecatcher, SMC_EYECATCHER,
 		       sizeof(SMC_EYECATCHER));
 		aclc.hdr.path = SMC_TYPE_R;
-		link = &conn->lgr->lnk[SMC_SINGLE_LINK];
+		link = conn->lnk;
 		memcpy(aclc.lcl.id_for_peer, local_systemid,
 		       sizeof(local_systemid));
 		memcpy(&aclc.lcl.gid, link->gid, SMC_GID_SIZE);
@@ -580,13 +580,13 @@ int smc_clc_send_accept(struct smc_sock *new_smc, int srv_first_contact)
 		       ETH_ALEN);
 		hton24(aclc.qpn, link->roce_qp->qp_num);
 		aclc.rmb_rkey =
-			htonl(conn->rmb_desc->mr_rx[SMC_SINGLE_LINK]->rkey);
+			htonl(conn->rmb_desc->mr_rx[link->link_idx]->rkey);
 		aclc.rmbe_idx = 1;		/* as long as 1 RMB = 1 RMBE */
 		aclc.rmbe_alert_token = htonl(conn->alert_token_local);
 		aclc.qp_mtu = link->path_mtu;
 		aclc.rmbe_size = conn->rmbe_size_short,
 		aclc.rmb_dma_addr = cpu_to_be64((u64)sg_dma_address
-				(conn->rmb_desc->sgt[SMC_SINGLE_LINK].sgl));
+				(conn->rmb_desc->sgt[link->link_idx].sgl));
 		hton24(aclc.psn, link->psn_initial);
 		memcpy(aclc.smcr_trl.eyecatcher, SMC_EYECATCHER,
 		       sizeof(SMC_EYECATCHER));
diff --git a/net/smc/smc_clc.h b/net/smc/smc_clc.h
index ca209272e5fa..4f2e150a2be1 100644
--- a/net/smc/smc_clc.h
+++ b/net/smc/smc_clc.h
@@ -44,6 +44,7 @@
 #define SMC_CLC_DECL_DIFFPREFIX	0x03070000  /* IP prefix / subnet mismatch    */
 #define SMC_CLC_DECL_GETVLANERR	0x03080000  /* err to get vlan id of ip device*/
 #define SMC_CLC_DECL_ISMVLANERR	0x03090000  /* err to reg vlan id on ism dev  */
+#define SMC_CLC_DECL_NOACTLINK	0x030a0000  /* no active smc-r link in lgr    */
 #define SMC_CLC_DECL_SYNCERR	0x04000000  /* synchronization error          */
 #define SMC_CLC_DECL_PEERDECL	0x05000000  /* peer declined during handshake */
 #define SMC_CLC_DECL_INTERR	0x09990000  /* internal error		      */
diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c
index 824c5211b027..db49f8cd5c95 100644
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -116,7 +116,7 @@ static void smc_lgr_add_alert_token(struct smc_connection *conn)
  * Requires @conns_lock
  * Note that '0' is a reserved value and not assigned.
  */
-static void smc_lgr_register_conn(struct smc_connection *conn)
+static int smc_lgr_register_conn(struct smc_connection *conn)
 {
 	struct smc_sock *smc = container_of(conn, struct smc_sock, conn);
 	static atomic_t nexttoken = ATOMIC_INIT(0);
@@ -131,7 +131,24 @@ static void smc_lgr_register_conn(struct smc_connection *conn)
 			conn->alert_token_local = 0;
 	}
 	smc_lgr_add_alert_token(conn);
+
+	/* assign the new connection to a link */
+	if (!conn->lgr->is_smcd) {
+		struct smc_link *lnk;
+		int i;
+
+		/* tbd - link balancing */
+		for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+			lnk = &conn->lgr->lnk[i];
+			if (lnk->state == SMC_LNK_ACTIVATING ||
+			    lnk->state == SMC_LNK_ACTIVE)
+				conn->lnk = lnk;
+		}
+		if (!conn->lnk)
+			return SMC_CLC_DECL_NOACTLINK;
+	}
 	conn->lgr->conns_num++;
+	return 0;
 }
 
 /* Unregister connection and reset the alert token of the given connection<
@@ -179,7 +196,7 @@ void smc_lgr_cleanup_early(struct smc_connection *conn)
  * of the DELETE LINK sequence from server; or as server to
  * initiate the delete processing. See smc_llc_rx_delete_link().
  */
-static int smc_link_send_delete(struct smc_link *lnk, bool orderly)
+static int smcr_link_send_delete(struct smc_link *lnk, bool orderly)
 {
 	if (lnk->state == SMC_LNK_ACTIVE &&
 	    !smc_llc_send_delete_link(lnk, SMC_LLC_REQ, orderly)) {
@@ -197,8 +214,8 @@ static void smc_lgr_free_work(struct work_struct *work)
 						  struct smc_link_group,
 						  free_work);
 	spinlock_t *lgr_lock;
-	struct smc_link *lnk;
 	bool conns;
+	int i;
 
 	smc_lgr_list_head(lgr, &lgr_lock);
 	spin_lock_bh(lgr_lock);
@@ -215,25 +232,38 @@ static void smc_lgr_free_work(struct work_struct *work)
 	}
 	list_del_init(&lgr->list); /* remove from smc_lgr_list */
 
-	lnk = &lgr->lnk[SMC_SINGLE_LINK];
 	if (!lgr->is_smcd && !lgr->terminating)	{
-		/* try to send del link msg, on error free lgr immediately */
-		if (lnk->state == SMC_LNK_ACTIVE &&
-		    !smc_link_send_delete(lnk, true)) {
-			/* reschedule in case we never receive a response */
-			smc_lgr_schedule_free_work(lgr);
+		bool do_wait = false;
+
+		for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+			struct smc_link *lnk = &lgr->lnk[i];
+			/* try to send del link msg, on err free immediately */
+			if (lnk->state == SMC_LNK_ACTIVE &&
+			    !smcr_link_send_delete(lnk, true)) {
+				/* reschedule in case we never receive a resp */
+				smc_lgr_schedule_free_work(lgr);
+				do_wait = true;
+			}
+		}
+		if (do_wait) {
 			spin_unlock_bh(lgr_lock);
-			return;
+			return; /* wait for resp, see smc_llc_rx_delete_link */
 		}
 	}
 	lgr->freeing = 1; /* this instance does the freeing, no new schedule */
 	spin_unlock_bh(lgr_lock);
 	cancel_delayed_work(&lgr->free_work);
 
-	if (!lgr->is_smcd && lnk->state != SMC_LNK_INACTIVE)
-		smc_llc_link_inactive(lnk);
 	if (lgr->is_smcd && !lgr->terminating)
 		smc_ism_signal_shutdown(lgr);
+	if (!lgr->is_smcd) {
+		for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+			struct smc_link *lnk = &lgr->lnk[i];
+
+			if (smc_link_usable(lnk))
+				lnk->state = SMC_LNK_INACTIVE;
+		}
+	}
 	smc_lgr_free(lgr);
 }
 
@@ -245,6 +275,87 @@ static void smc_lgr_terminate_work(struct work_struct *work)
 	__smc_lgr_terminate(lgr, true);
 }
 
+/* return next unique link id for the lgr */
+static u8 smcr_next_link_id(struct smc_link_group *lgr)
+{
+	u8 link_id;
+	int i;
+
+	while (1) {
+		link_id = ++lgr->next_link_id;
+		if (!link_id)	/* skip zero as link_id */
+			link_id = ++lgr->next_link_id;
+		for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+			if (smc_link_usable(&lgr->lnk[i]) &&
+			    lgr->lnk[i].link_id == link_id)
+				continue;
+		}
+		break;
+	}
+	return link_id;
+}
+
+static int smcr_link_init(struct smc_link_group *lgr, struct smc_link *lnk,
+			  u8 link_idx, struct smc_init_info *ini)
+{
+	u8 rndvec[3];
+	int rc;
+
+	get_device(&ini->ib_dev->ibdev->dev);
+	atomic_inc(&ini->ib_dev->lnk_cnt);
+	lnk->state = SMC_LNK_ACTIVATING;
+	lnk->link_id = smcr_next_link_id(lgr);
+	lnk->lgr = lgr;
+	lnk->link_idx = link_idx;
+	lnk->smcibdev = ini->ib_dev;
+	lnk->ibport = ini->ib_port;
+	lnk->path_mtu = ini->ib_dev->pattr[ini->ib_port - 1].active_mtu;
+	if (!ini->ib_dev->initialized) {
+		rc = (int)smc_ib_setup_per_ibdev(ini->ib_dev);
+		if (rc)
+			goto out;
+	}
+	get_random_bytes(rndvec, sizeof(rndvec));
+	lnk->psn_initial = rndvec[0] + (rndvec[1] << 8) +
+		(rndvec[2] << 16);
+	rc = smc_ib_determine_gid(lnk->smcibdev, lnk->ibport,
+				  ini->vlan_id, lnk->gid, &lnk->sgid_index);
+	if (rc)
+		goto out;
+	rc = smc_llc_link_init(lnk);
+	if (rc)
+		goto out;
+	rc = smc_wr_alloc_link_mem(lnk);
+	if (rc)
+		goto clear_llc_lnk;
+	rc = smc_ib_create_protection_domain(lnk);
+	if (rc)
+		goto free_link_mem;
+	rc = smc_ib_create_queue_pair(lnk);
+	if (rc)
+		goto dealloc_pd;
+	rc = smc_wr_create_link(lnk);
+	if (rc)
+		goto destroy_qp;
+	return 0;
+
+destroy_qp:
+	smc_ib_destroy_queue_pair(lnk);
+dealloc_pd:
+	smc_ib_dealloc_protection_domain(lnk);
+free_link_mem:
+	smc_wr_free_link_mem(lnk);
+clear_llc_lnk:
+	smc_llc_link_clear(lnk);
+out:
+	put_device(&ini->ib_dev->ibdev->dev);
+	memset(lnk, 0, sizeof(struct smc_link));
+	lnk->state = SMC_LNK_UNUSED;
+	if (!atomic_dec_return(&ini->ib_dev->lnk_cnt))
+		wake_up(&ini->ib_dev->lnks_deleted);
+	return rc;
+}
+
 /* create a new SMC link group */
 static int smc_lgr_create(struct smc_sock *smc, struct smc_init_info *ini)
 {
@@ -252,7 +363,7 @@ static int smc_lgr_create(struct smc_sock *smc, struct smc_init_info *ini)
 	struct list_head *lgr_list;
 	struct smc_link *lnk;
 	spinlock_t *lgr_lock;
-	u8 rndvec[3];
+	u8 link_idx;
 	int rc = 0;
 	int i;
 
@@ -274,13 +385,14 @@ static int smc_lgr_create(struct smc_sock *smc, struct smc_init_info *ini)
 	lgr->freefast = 0;
 	lgr->freeing = 0;
 	lgr->vlan_id = ini->vlan_id;
-	rwlock_init(&lgr->sndbufs_lock);
-	rwlock_init(&lgr->rmbs_lock);
+	mutex_init(&lgr->sndbufs_lock);
+	mutex_init(&lgr->rmbs_lock);
 	rwlock_init(&lgr->conns_lock);
 	for (i = 0; i < SMC_RMBE_SIZES; i++) {
 		INIT_LIST_HEAD(&lgr->sndbufs[i]);
 		INIT_LIST_HEAD(&lgr->rmbs[i]);
 	}
+	lgr->next_link_id = 0;
 	smc_lgr_list.num += SMC_LGR_NUM_INCR;
 	memcpy(&lgr->id, (u8 *)&smc_lgr_list.num, SMC_LGR_ID_SIZE);
 	INIT_DELAYED_WORK(&lgr->free_work, smc_lgr_free_work);
@@ -297,48 +409,19 @@ static int smc_lgr_create(struct smc_sock *smc, struct smc_init_info *ini)
 		atomic_inc(&ini->ism_dev->lgr_cnt);
 	} else {
 		/* SMC-R specific settings */
-		get_device(&ini->ib_dev->ibdev->dev);
 		lgr->role = smc->listen_smc ? SMC_SERV : SMC_CLNT;
 		memcpy(lgr->peer_systemid, ini->ib_lcl->id_for_peer,
 		       SMC_SYSTEMID_LEN);
+		smc_llc_lgr_init(lgr, smc);
 
-		lnk = &lgr->lnk[SMC_SINGLE_LINK];
-		/* initialize link */
-		lnk->state = SMC_LNK_ACTIVATING;
-		lnk->link_id = SMC_SINGLE_LINK;
-		lnk->smcibdev = ini->ib_dev;
-		lnk->ibport = ini->ib_port;
-		lgr_list = &smc_lgr_list.list;
-		lgr_lock = &smc_lgr_list.lock;
-		lnk->path_mtu =
-			ini->ib_dev->pattr[ini->ib_port - 1].active_mtu;
-		if (!ini->ib_dev->initialized)
-			smc_ib_setup_per_ibdev(ini->ib_dev);
-		get_random_bytes(rndvec, sizeof(rndvec));
-		lnk->psn_initial = rndvec[0] + (rndvec[1] << 8) +
-			(rndvec[2] << 16);
-		rc = smc_ib_determine_gid(lnk->smcibdev, lnk->ibport,
-					  ini->vlan_id, lnk->gid,
-					  &lnk->sgid_index);
-		if (rc)
-			goto free_lgr;
-		rc = smc_llc_link_init(lnk);
+		link_idx = SMC_SINGLE_LINK;
+		lnk = &lgr->lnk[link_idx];
+		rc = smcr_link_init(lgr, lnk, link_idx, ini);
 		if (rc)
 			goto free_lgr;
-		rc = smc_wr_alloc_link_mem(lnk);
-		if (rc)
-			goto clear_llc_lnk;
-		rc = smc_ib_create_protection_domain(lnk);
-		if (rc)
-			goto free_link_mem;
-		rc = smc_ib_create_queue_pair(lnk);
-		if (rc)
-			goto dealloc_pd;
-		rc = smc_wr_create_link(lnk);
-		if (rc)
-			goto destroy_qp;
+		lgr_list = &smc_lgr_list.list;
+		lgr_lock = &smc_lgr_list.lock;
 		atomic_inc(&lgr_cnt);
-		atomic_inc(&ini->ib_dev->lnk_cnt);
 	}
 	smc->conn.lgr = lgr;
 	spin_lock_bh(lgr_lock);
@@ -346,14 +429,6 @@ static int smc_lgr_create(struct smc_sock *smc, struct smc_init_info *ini)
 	spin_unlock_bh(lgr_lock);
 	return 0;
 
-destroy_qp:
-	smc_ib_destroy_queue_pair(lnk);
-dealloc_pd:
-	smc_ib_dealloc_protection_domain(lnk);
-free_link_mem:
-	smc_wr_free_link_mem(lnk);
-clear_llc_lnk:
-	smc_llc_link_clear(lnk);
 free_lgr:
 	kfree(lgr);
 ism_put_vlan:
@@ -369,29 +444,37 @@ static int smc_lgr_create(struct smc_sock *smc, struct smc_init_info *ini)
 	return rc;
 }
 
+static void smcr_buf_unuse(struct smc_buf_desc *rmb_desc,
+			   struct smc_link *lnk)
+{
+	struct smc_link_group *lgr = lnk->lgr;
+
+	if (rmb_desc->is_conf_rkey && !list_empty(&lgr->list)) {
+		/* unregister rmb with peer */
+		smc_llc_do_delete_rkey(lnk, rmb_desc);
+		rmb_desc->is_conf_rkey = false;
+	}
+	if (rmb_desc->is_reg_err) {
+		/* buf registration failed, reuse not possible */
+		mutex_lock(&lgr->rmbs_lock);
+		list_del(&rmb_desc->list);
+		mutex_unlock(&lgr->rmbs_lock);
+
+		smc_buf_free(lgr, true, rmb_desc);
+	} else {
+		rmb_desc->used = 0;
+	}
+}
+
 static void smc_buf_unuse(struct smc_connection *conn,
 			  struct smc_link_group *lgr)
 {
 	if (conn->sndbuf_desc)
 		conn->sndbuf_desc->used = 0;
-	if (conn->rmb_desc) {
-		if (!conn->rmb_desc->regerr) {
-			if (!lgr->is_smcd && !list_empty(&lgr->list)) {
-				/* unregister rmb with peer */
-				smc_llc_do_delete_rkey(
-						&lgr->lnk[SMC_SINGLE_LINK],
-						conn->rmb_desc);
-			}
-			conn->rmb_desc->used = 0;
-		} else {
-			/* buf registration failed, reuse not possible */
-			write_lock_bh(&lgr->rmbs_lock);
-			list_del(&conn->rmb_desc->list);
-			write_unlock_bh(&lgr->rmbs_lock);
-
-			smc_buf_free(lgr, true, conn->rmb_desc);
-		}
-	}
+	if (conn->rmb_desc && lgr->is_smcd)
+		conn->rmb_desc->used = 0;
+	else if (conn->rmb_desc)
+		smcr_buf_unuse(conn->rmb_desc, conn->lnk);
 }
 
 /* remove a finished connection from its link group */
@@ -417,8 +500,12 @@ void smc_conn_free(struct smc_connection *conn)
 		smc_lgr_schedule_free_work(lgr);
 }
 
-static void smc_link_clear(struct smc_link *lnk)
+static void smcr_link_clear(struct smc_link *lnk)
 {
+	struct smc_ib_device *smcibdev;
+
+	if (lnk->peer_qpn == 0)
+		return;
 	lnk->peer_qpn = 0;
 	smc_llc_link_clear(lnk);
 	smc_ib_modify_qp_reset(lnk);
@@ -426,26 +513,35 @@ static void smc_link_clear(struct smc_link *lnk)
 	smc_ib_destroy_queue_pair(lnk);
 	smc_ib_dealloc_protection_domain(lnk);
 	smc_wr_free_link_mem(lnk);
-	if (!atomic_dec_return(&lnk->smcibdev->lnk_cnt))
-		wake_up(&lnk->smcibdev->lnks_deleted);
+	put_device(&lnk->smcibdev->ibdev->dev);
+	smcibdev = lnk->smcibdev;
+	memset(lnk, 0, sizeof(struct smc_link));
+	lnk->state = SMC_LNK_UNUSED;
+	if (!atomic_dec_return(&smcibdev->lnk_cnt))
+		wake_up(&smcibdev->lnks_deleted);
 }
 
 static void smcr_buf_free(struct smc_link_group *lgr, bool is_rmb,
 			  struct smc_buf_desc *buf_desc)
 {
-	struct smc_link *lnk = &lgr->lnk[SMC_SINGLE_LINK];
+	struct smc_link *lnk;
+	int i;
 
-	if (is_rmb) {
-		if (buf_desc->mr_rx[SMC_SINGLE_LINK])
-			smc_ib_put_memory_region(
-					buf_desc->mr_rx[SMC_SINGLE_LINK]);
-		smc_ib_buf_unmap_sg(lnk->smcibdev, buf_desc,
-				    DMA_FROM_DEVICE);
-	} else {
-		smc_ib_buf_unmap_sg(lnk->smcibdev, buf_desc,
-				    DMA_TO_DEVICE);
+	for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+		lnk = &lgr->lnk[i];
+		if (!buf_desc->is_map_ib[lnk->link_idx])
+			continue;
+		if (is_rmb) {
+			if (buf_desc->mr_rx[lnk->link_idx])
+				smc_ib_put_memory_region(
+						buf_desc->mr_rx[lnk->link_idx]);
+			smc_ib_buf_unmap_sg(lnk, buf_desc, DMA_FROM_DEVICE);
+		} else {
+			smc_ib_buf_unmap_sg(lnk, buf_desc, DMA_TO_DEVICE);
+		}
+		sg_free_table(&buf_desc->sgt[lnk->link_idx]);
 	}
-	sg_free_table(&buf_desc->sgt[SMC_SINGLE_LINK]);
+
 	if (buf_desc->pages)
 		__free_pages(buf_desc->pages, buf_desc->order);
 	kfree(buf_desc);
@@ -503,6 +599,8 @@ static void smc_lgr_free_bufs(struct smc_link_group *lgr)
 /* remove a link group */
 static void smc_lgr_free(struct smc_link_group *lgr)
 {
+	int i;
+
 	smc_lgr_free_bufs(lgr);
 	if (lgr->is_smcd) {
 		if (!lgr->terminating) {
@@ -512,8 +610,11 @@ static void smc_lgr_free(struct smc_link_group *lgr)
 		if (!atomic_dec_return(&lgr->smcd->lgr_cnt))
 			wake_up(&lgr->smcd->lgrs_deleted);
 	} else {
-		smc_link_clear(&lgr->lnk[SMC_SINGLE_LINK]);
-		put_device(&lgr->lnk[SMC_SINGLE_LINK].smcibdev->ibdev->dev);
+		for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+			if (lgr->lnk[i].state != SMC_LNK_UNUSED)
+				smcr_link_clear(&lgr->lnk[i]);
+		}
+		smc_llc_lgr_clear(lgr);
 		if (!atomic_dec_return(&lgr_cnt))
 			wake_up(&lgrs_deleted);
 	}
@@ -581,16 +682,20 @@ static void smc_conn_kill(struct smc_connection *conn, bool soft)
 
 static void smc_lgr_cleanup(struct smc_link_group *lgr)
 {
+	int i;
+
 	if (lgr->is_smcd) {
 		smc_ism_signal_shutdown(lgr);
 		smcd_unregister_all_dmbs(lgr);
 		smc_ism_put_vlan(lgr->smcd, lgr->vlan_id);
 		put_device(&lgr->smcd->dev);
 	} else {
-		struct smc_link *lnk = &lgr->lnk[SMC_SINGLE_LINK];
+		for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+			struct smc_link *lnk = &lgr->lnk[i];
 
-		if (lnk->state != SMC_LNK_INACTIVE)
-			smc_llc_link_inactive(lnk);
+			if (smc_link_usable(lnk))
+				lnk->state = SMC_LNK_INACTIVE;
+		}
 	}
 }
 
@@ -609,8 +714,6 @@ static void __smc_lgr_terminate(struct smc_link_group *lgr, bool soft)
 	if (!soft)
 		cancel_delayed_work_sync(&lgr->free_work);
 	lgr->terminating = 1;
-	if (!lgr->is_smcd)
-		smc_llc_link_inactive(&lgr->lnk[SMC_SINGLE_LINK]);
 
 	/* kill remaining link group connections */
 	read_lock_bh(&lgr->conns_lock);
@@ -656,14 +759,22 @@ void smc_port_terminate(struct smc_ib_device *smcibdev, u8 ibport)
 {
 	struct smc_link_group *lgr, *l;
 	LIST_HEAD(lgr_free_list);
+	int i;
 
 	spin_lock_bh(&smc_lgr_list.lock);
 	list_for_each_entry_safe(lgr, l, &smc_lgr_list.list, list) {
-		if (!lgr->is_smcd &&
-		    lgr->lnk[SMC_SINGLE_LINK].smcibdev == smcibdev &&
-		    lgr->lnk[SMC_SINGLE_LINK].ibport == ibport) {
-			list_move(&lgr->list, &lgr_free_list);
-			lgr->freeing = 1;
+		if (lgr->is_smcd)
+			continue;
+		/* tbd - terminate only when no more links are active */
+		for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+			if (!smc_link_usable(&lgr->lnk[i]) ||
+			    lgr->lnk[i].state == SMC_LNK_DELETING)
+				continue;
+			if (lgr->lnk[i].smcibdev == smcibdev &&
+			    lgr->lnk[i].ibport == ibport) {
+				list_move(&lgr->list, &lgr_free_list);
+				lgr->freeing = 1;
+			}
 		}
 	}
 	spin_unlock_bh(&smc_lgr_list.lock);
@@ -728,6 +839,7 @@ void smc_smcr_terminate_all(struct smc_ib_device *smcibdev)
 {
 	struct smc_link_group *lgr, *lg;
 	LIST_HEAD(lgr_free_list);
+	int i;
 
 	spin_lock_bh(&smc_lgr_list.lock);
 	if (!smcibdev) {
@@ -736,9 +848,12 @@ void smc_smcr_terminate_all(struct smc_ib_device *smcibdev)
 			lgr->freeing = 1;
 	} else {
 		list_for_each_entry_safe(lgr, lg, &smc_lgr_list.list, list) {
-			if (lgr->lnk[SMC_SINGLE_LINK].smcibdev == smcibdev) {
-				list_move(&lgr->list, &lgr_free_list);
-				lgr->freeing = 1;
+			for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+				if (lgr->lnk[i].smcibdev == smcibdev) {
+					list_move(&lgr->list, &lgr_free_list);
+					lgr->freeing = 1;
+					break;
+				}
 			}
 		}
 	}
@@ -810,15 +925,21 @@ static bool smcr_lgr_match(struct smc_link_group *lgr,
 			   struct smc_clc_msg_local *lcl,
 			   enum smc_lgr_role role, u32 clcqpn)
 {
-	return !memcmp(lgr->peer_systemid, lcl->id_for_peer,
-		       SMC_SYSTEMID_LEN) &&
-		!memcmp(lgr->lnk[SMC_SINGLE_LINK].peer_gid, &lcl->gid,
-			SMC_GID_SIZE) &&
-		!memcmp(lgr->lnk[SMC_SINGLE_LINK].peer_mac, lcl->mac,
-			sizeof(lcl->mac)) &&
-		lgr->role == role &&
-		(lgr->role == SMC_SERV ||
-		 lgr->lnk[SMC_SINGLE_LINK].peer_qpn == clcqpn);
+	int i;
+
+	if (memcmp(lgr->peer_systemid, lcl->id_for_peer, SMC_SYSTEMID_LEN) ||
+	    lgr->role != role)
+		return false;
+
+	for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+		if (lgr->lnk[i].state != SMC_LNK_ACTIVE)
+			continue;
+		if ((lgr->role == SMC_SERV || lgr->lnk[i].peer_qpn == clcqpn) &&
+		    !memcmp(lgr->lnk[i].peer_gid, &lcl->gid, SMC_GID_SIZE) &&
+		    !memcmp(lgr->lnk[i].peer_mac, lcl->mac, sizeof(lcl->mac)))
+			return true;
+	}
+	return false;
 }
 
 static bool smcd_lgr_match(struct smc_link_group *lgr,
@@ -859,15 +980,17 @@ int smc_conn_create(struct smc_sock *smc, struct smc_init_info *ini)
 			/* link group found */
 			ini->cln_first_contact = SMC_REUSE_CONTACT;
 			conn->lgr = lgr;
-			smc_lgr_register_conn(conn); /* add smc conn to lgr */
-			if (delayed_work_pending(&lgr->free_work))
-				cancel_delayed_work(&lgr->free_work);
+			rc = smc_lgr_register_conn(conn); /* add conn to lgr */
 			write_unlock_bh(&lgr->conns_lock);
+			if (!rc && delayed_work_pending(&lgr->free_work))
+				cancel_delayed_work(&lgr->free_work);
 			break;
 		}
 		write_unlock_bh(&lgr->conns_lock);
 	}
 	spin_unlock_bh(lgr_lock);
+	if (rc)
+		return rc;
 
 	if (role == SMC_CLNT && !ini->srv_first_contact &&
 	    ini->cln_first_contact == SMC_FIRST_CONTACT) {
@@ -885,8 +1008,10 @@ int smc_conn_create(struct smc_sock *smc, struct smc_init_info *ini)
 			goto out;
 		lgr = conn->lgr;
 		write_lock_bh(&lgr->conns_lock);
-		smc_lgr_register_conn(conn); /* add smc conn to lgr */
+		rc = smc_lgr_register_conn(conn); /* add smc conn to lgr */
 		write_unlock_bh(&lgr->conns_lock);
+		if (rc)
+			goto out;
 	}
 	conn->local_tx_ctrl.common.type = SMC_CDC_MSG_TYPE;
 	conn->local_tx_ctrl.len = SMC_WR_TX_SIZE;
@@ -934,19 +1059,19 @@ int smc_uncompress_bufsize(u8 compressed)
  * buffer size; if not available, return NULL
  */
 static struct smc_buf_desc *smc_buf_get_slot(int compressed_bufsize,
-					     rwlock_t *lock,
+					     struct mutex *lock,
 					     struct list_head *buf_list)
 {
 	struct smc_buf_desc *buf_slot;
 
-	read_lock_bh(lock);
+	mutex_lock(lock);
 	list_for_each_entry(buf_slot, buf_list, list) {
 		if (cmpxchg(&buf_slot->used, 0, 1) == 0) {
-			read_unlock_bh(lock);
+			mutex_unlock(lock);
 			return buf_slot;
 		}
 	}
-	read_unlock_bh(lock);
+	mutex_unlock(lock);
 	return NULL;
 }
 
@@ -959,12 +1084,55 @@ static inline int smc_rmb_wnd_update_limit(int rmbe_size)
 	return min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2);
 }
 
+/* map an rmb buf to a link */
+static int smcr_buf_map_link(struct smc_buf_desc *buf_desc, bool is_rmb,
+			     struct smc_link *lnk)
+{
+	int rc;
+
+	if (buf_desc->is_map_ib[lnk->link_idx])
+		return 0;
+
+	rc = sg_alloc_table(&buf_desc->sgt[lnk->link_idx], 1, GFP_KERNEL);
+	if (rc)
+		return rc;
+	sg_set_buf(buf_desc->sgt[lnk->link_idx].sgl,
+		   buf_desc->cpu_addr, buf_desc->len);
+
+	/* map sg table to DMA address */
+	rc = smc_ib_buf_map_sg(lnk, buf_desc,
+			       is_rmb ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+	/* SMC protocol depends on mapping to one DMA address only */
+	if (rc != 1) {
+		rc = -EAGAIN;
+		goto free_table;
+	}
+
+	/* create a new memory region for the RMB */
+	if (is_rmb) {
+		rc = smc_ib_get_memory_region(lnk->roce_pd,
+					      IB_ACCESS_REMOTE_WRITE |
+					      IB_ACCESS_LOCAL_WRITE,
+					      buf_desc, lnk->link_idx);
+		if (rc)
+			goto buf_unmap;
+		smc_ib_sync_sg_for_device(lnk, buf_desc, DMA_FROM_DEVICE);
+	}
+	buf_desc->is_map_ib[lnk->link_idx] = true;
+	return 0;
+
+buf_unmap:
+	smc_ib_buf_unmap_sg(lnk, buf_desc,
+			    is_rmb ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+free_table:
+	sg_free_table(&buf_desc->sgt[lnk->link_idx]);
+	return rc;
+}
+
 static struct smc_buf_desc *smcr_new_buf_create(struct smc_link_group *lgr,
 						bool is_rmb, int bufsize)
 {
 	struct smc_buf_desc *buf_desc;
-	struct smc_link *lnk;
-	int rc;
 
 	/* try to alloc a new buffer */
 	buf_desc = kzalloc(sizeof(*buf_desc), GFP_KERNEL);
@@ -981,41 +1149,31 @@ static struct smc_buf_desc *smcr_new_buf_create(struct smc_link_group *lgr,
 		return ERR_PTR(-EAGAIN);
 	}
 	buf_desc->cpu_addr = (void *)page_address(buf_desc->pages);
+	buf_desc->len = bufsize;
+	return buf_desc;
+}
 
-	/* build the sg table from the pages */
-	lnk = &lgr->lnk[SMC_SINGLE_LINK];
-	rc = sg_alloc_table(&buf_desc->sgt[SMC_SINGLE_LINK], 1,
-			    GFP_KERNEL);
-	if (rc) {
-		smc_buf_free(lgr, is_rmb, buf_desc);
-		return ERR_PTR(rc);
-	}
-	sg_set_buf(buf_desc->sgt[SMC_SINGLE_LINK].sgl,
-		   buf_desc->cpu_addr, bufsize);
+/* map buf_desc on all usable links,
+ * unused buffers stay mapped as long as the link is up
+ */
+static int smcr_buf_map_usable_links(struct smc_link_group *lgr,
+				     struct smc_buf_desc *buf_desc, bool is_rmb)
+{
+	int i, rc = 0;
 
-	/* map sg table to DMA address */
-	rc = smc_ib_buf_map_sg(lnk->smcibdev, buf_desc,
-			       is_rmb ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-	/* SMC protocol depends on mapping to one DMA address only */
-	if (rc != 1)  {
-		smc_buf_free(lgr, is_rmb, buf_desc);
-		return ERR_PTR(-EAGAIN);
-	}
+	for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+		struct smc_link *lnk = &lgr->lnk[i];
 
-	/* create a new memory region for the RMB */
-	if (is_rmb) {
-		rc = smc_ib_get_memory_region(lnk->roce_pd,
-					      IB_ACCESS_REMOTE_WRITE |
-					      IB_ACCESS_LOCAL_WRITE,
-					      buf_desc);
-		if (rc) {
-			smc_buf_free(lgr, is_rmb, buf_desc);
-			return ERR_PTR(rc);
+		if (!smc_link_usable(lnk))
+			continue;
+		if (smcr_buf_map_link(buf_desc, is_rmb, lnk)) {
+			smcr_buf_unuse(buf_desc, lnk);
+			rc = -ENOMEM;
+			goto out;
 		}
 	}
-
-	buf_desc->len = bufsize;
-	return buf_desc;
+out:
+	return rc;
 }
 
 #define SMCD_DMBE_SIZES		7 /* 0 -> 16KB, 1 -> 32KB, .. 6 -> 1MB */
@@ -1062,8 +1220,8 @@ static int __smc_buf_create(struct smc_sock *smc, bool is_smcd, bool is_rmb)
 	struct smc_link_group *lgr = conn->lgr;
 	struct list_head *buf_list;
 	int bufsize, bufsize_short;
+	struct mutex *lock;	/* lock buffer list */
 	int sk_buf_size;
-	rwlock_t *lock;
 
 	if (is_rmb)
 		/* use socket recv buffer size (w/o overhead) as start value */
@@ -1104,15 +1262,21 @@ static int __smc_buf_create(struct smc_sock *smc, bool is_smcd, bool is_rmb)
 			continue;
 
 		buf_desc->used = 1;
-		write_lock_bh(lock);
+		mutex_lock(lock);
 		list_add(&buf_desc->list, buf_list);
-		write_unlock_bh(lock);
+		mutex_unlock(lock);
 		break; /* found */
 	}
 
 	if (IS_ERR(buf_desc))
 		return -ENOMEM;
 
+	if (!is_smcd) {
+		if (smcr_buf_map_usable_links(lgr, buf_desc, is_rmb)) {
+			return -ENOMEM;
+		}
+	}
+
 	if (is_rmb) {
 		conn->rmb_desc = buf_desc;
 		conn->rmbe_size_short = bufsize_short;
@@ -1132,42 +1296,44 @@ static int __smc_buf_create(struct smc_sock *smc, bool is_smcd, bool is_rmb)
 
 void smc_sndbuf_sync_sg_for_cpu(struct smc_connection *conn)
 {
-	struct smc_link_group *lgr = conn->lgr;
-
-	if (!conn->lgr || conn->lgr->is_smcd)
+	if (!conn->lgr || conn->lgr->is_smcd || !smc_link_usable(conn->lnk))
 		return;
-	smc_ib_sync_sg_for_cpu(lgr->lnk[SMC_SINGLE_LINK].smcibdev,
-			       conn->sndbuf_desc, DMA_TO_DEVICE);
+	smc_ib_sync_sg_for_cpu(conn->lnk, conn->sndbuf_desc, DMA_TO_DEVICE);
 }
 
 void smc_sndbuf_sync_sg_for_device(struct smc_connection *conn)
 {
-	struct smc_link_group *lgr = conn->lgr;
-
-	if (!conn->lgr || conn->lgr->is_smcd)
+	if (!conn->lgr || conn->lgr->is_smcd || !smc_link_usable(conn->lnk))
 		return;
-	smc_ib_sync_sg_for_device(lgr->lnk[SMC_SINGLE_LINK].smcibdev,
-				  conn->sndbuf_desc, DMA_TO_DEVICE);
+	smc_ib_sync_sg_for_device(conn->lnk, conn->sndbuf_desc, DMA_TO_DEVICE);
 }
 
 void smc_rmb_sync_sg_for_cpu(struct smc_connection *conn)
 {
-	struct smc_link_group *lgr = conn->lgr;
+	int i;
 
 	if (!conn->lgr || conn->lgr->is_smcd)
 		return;
-	smc_ib_sync_sg_for_cpu(lgr->lnk[SMC_SINGLE_LINK].smcibdev,
-			       conn->rmb_desc, DMA_FROM_DEVICE);
+	for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+		if (!smc_link_usable(&conn->lgr->lnk[i]))
+			continue;
+		smc_ib_sync_sg_for_cpu(&conn->lgr->lnk[i], conn->rmb_desc,
+				       DMA_FROM_DEVICE);
+	}
 }
 
 void smc_rmb_sync_sg_for_device(struct smc_connection *conn)
 {
-	struct smc_link_group *lgr = conn->lgr;
+	int i;
 
 	if (!conn->lgr || conn->lgr->is_smcd)
 		return;
-	smc_ib_sync_sg_for_device(lgr->lnk[SMC_SINGLE_LINK].smcibdev,
-				  conn->rmb_desc, DMA_FROM_DEVICE);
+	for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
+		if (!smc_link_usable(&conn->lgr->lnk[i]))
+			continue;
+		smc_ib_sync_sg_for_device(&conn->lgr->lnk[i], conn->rmb_desc,
+					  DMA_FROM_DEVICE);
+	}
 }
 
 /* create the send and receive buffer for an SMC socket;
@@ -1203,15 +1369,16 @@ static inline int smc_rmb_reserve_rtoken_idx(struct smc_link_group *lgr)
 }
 
 /* add a new rtoken from peer */
-int smc_rtoken_add(struct smc_link_group *lgr, __be64 nw_vaddr, __be32 nw_rkey)
+int smc_rtoken_add(struct smc_link *lnk, __be64 nw_vaddr, __be32 nw_rkey)
 {
+	struct smc_link_group *lgr = smc_get_lgr(lnk);
 	u64 dma_addr = be64_to_cpu(nw_vaddr);
 	u32 rkey = ntohl(nw_rkey);
 	int i;
 
 	for (i = 0; i < SMC_RMBS_PER_LGR_MAX; i++) {
-		if ((lgr->rtokens[i][SMC_SINGLE_LINK].rkey == rkey) &&
-		    (lgr->rtokens[i][SMC_SINGLE_LINK].dma_addr == dma_addr) &&
+		if (lgr->rtokens[i][lnk->link_idx].rkey == rkey &&
+		    lgr->rtokens[i][lnk->link_idx].dma_addr == dma_addr &&
 		    test_bit(i, lgr->rtokens_used_mask)) {
 			/* already in list */
 			return i;
@@ -1220,23 +1387,25 @@ int smc_rtoken_add(struct smc_link_group *lgr, __be64 nw_vaddr, __be32 nw_rkey)
 	i = smc_rmb_reserve_rtoken_idx(lgr);
 	if (i < 0)
 		return i;
-	lgr->rtokens[i][SMC_SINGLE_LINK].rkey = rkey;
-	lgr->rtokens[i][SMC_SINGLE_LINK].dma_addr = dma_addr;
+	lgr->rtokens[i][lnk->link_idx].rkey = rkey;
+	lgr->rtokens[i][lnk->link_idx].dma_addr = dma_addr;
 	return i;
 }
 
-/* delete an rtoken */
-int smc_rtoken_delete(struct smc_link_group *lgr, __be32 nw_rkey)
+/* delete an rtoken from all links */
+int smc_rtoken_delete(struct smc_link *lnk, __be32 nw_rkey)
 {
+	struct smc_link_group *lgr = smc_get_lgr(lnk);
 	u32 rkey = ntohl(nw_rkey);
-	int i;
+	int i, j;
 
 	for (i = 0; i < SMC_RMBS_PER_LGR_MAX; i++) {
-		if (lgr->rtokens[i][SMC_SINGLE_LINK].rkey == rkey &&
+		if (lgr->rtokens[i][lnk->link_idx].rkey == rkey &&
 		    test_bit(i, lgr->rtokens_used_mask)) {
-			lgr->rtokens[i][SMC_SINGLE_LINK].rkey = 0;
-			lgr->rtokens[i][SMC_SINGLE_LINK].dma_addr = 0;
-
+			for (j = 0; j < SMC_LINKS_PER_LGR_MAX; j++) {
+				lgr->rtokens[i][j].rkey = 0;
+				lgr->rtokens[i][j].dma_addr = 0;
+			}
 			clear_bit(i, lgr->rtokens_used_mask);
 			return 0;
 		}
@@ -1246,9 +1415,10 @@ int smc_rtoken_delete(struct smc_link_group *lgr, __be32 nw_rkey)
 
 /* save rkey and dma_addr received from peer during clc handshake */
 int smc_rmb_rtoken_handling(struct smc_connection *conn,
+			    struct smc_link *lnk,
 			    struct smc_clc_msg_accept_confirm *clc)
 {
-	conn->rtoken_idx = smc_rtoken_add(conn->lgr, clc->rmb_dma_addr,
+	conn->rtoken_idx = smc_rtoken_add(lnk, clc->rmb_dma_addr,
 					  clc->rmb_rkey);
 	if (conn->rtoken_idx < 0)
 		return conn->rtoken_idx;
diff --git a/net/smc/smc_core.h b/net/smc/smc_core.h
index 8041db20c753..b5781511063d 100644
--- a/net/smc/smc_core.h
+++ b/net/smc/smc_core.h
@@ -32,6 +32,7 @@ enum smc_lgr_role {		/* possible roles of a link group */
 };
 
 enum smc_link_state {			/* possible states of a link */
+	SMC_LNK_UNUSED,		/* link is unused */
 	SMC_LNK_INACTIVE,	/* link is inactive */
 	SMC_LNK_ACTIVATING,	/* link is being activated */
 	SMC_LNK_ACTIVE,		/* link is active */
@@ -115,9 +116,10 @@ struct smc_link {
 	u8			peer_mac[ETH_ALEN];	/* = gid[8:10||13:15] */
 	u8			peer_gid[SMC_GID_SIZE];	/* gid of peer*/
 	u8			link_id;	/* unique # within link group */
+	u8			link_idx;	/* index in lgr link array */
+	struct smc_link_group	*lgr;		/* parent link group */
 
 	enum smc_link_state	state;		/* state of link */
-	struct workqueue_struct *llc_wq;	/* single thread work queue */
 	struct completion	llc_confirm;	/* wait for rx of conf link */
 	struct completion	llc_confirm_resp; /* wait 4 rx of cnf lnk rsp */
 	int			llc_confirm_rc; /* rc from confirm link msg */
@@ -127,10 +129,10 @@ struct smc_link {
 	struct delayed_work	llc_testlink_wrk; /* testlink worker */
 	struct completion	llc_testlink_resp; /* wait for rx of testlink */
 	int			llc_testlink_time; /* testlink interval */
-	struct completion	llc_confirm_rkey; /* wait 4 rx of cnf rkey */
-	int			llc_confirm_rkey_rc; /* rc from cnf rkey msg */
-	struct completion	llc_delete_rkey; /* wait 4 rx of del rkey */
-	int			llc_delete_rkey_rc; /* rc from del rkey msg */
+	struct completion	llc_confirm_rkey_resp; /* w4 rx of cnf rkey */
+	int			llc_confirm_rkey_resp_rc; /* rc from cnf rkey */
+	struct completion	llc_delete_rkey_resp; /* w4 rx of del rkey */
+	int			llc_delete_rkey_resp_rc; /* rc from del rkey */
 	struct mutex		llc_delete_rkey_mutex; /* serialize usage */
 };
 
@@ -150,25 +152,32 @@ struct smc_buf_desc {
 	struct page		*pages;
 	int			len;		/* length of buffer */
 	u32			used;		/* currently used / unused */
-	u8			wr_reg	: 1;	/* mem region registered */
-	u8			regerr	: 1;	/* err during registration */
 	union {
 		struct { /* SMC-R */
-			struct sg_table		sgt[SMC_LINKS_PER_LGR_MAX];
-						/* virtual buffer */
-			struct ib_mr		*mr_rx[SMC_LINKS_PER_LGR_MAX];
-						/* for rmb only: memory region
-						 * incl. rkey provided to peer
-						 */
-			u32			order;	/* allocation order */
+			struct sg_table	sgt[SMC_LINKS_PER_LGR_MAX];
+					/* virtual buffer */
+			struct ib_mr	*mr_rx[SMC_LINKS_PER_LGR_MAX];
+					/* for rmb only: memory region
+					 * incl. rkey provided to peer
+					 */
+			u32		order;	/* allocation order */
+
+			u8		is_conf_rkey;
+					/* confirm_rkey done */
+			u8		is_reg_mr[SMC_LINKS_PER_LGR_MAX];
+					/* mem region registered */
+			u8		is_map_ib[SMC_LINKS_PER_LGR_MAX];
+					/* mem region mapped to lnk */
+			u8		is_reg_err;
+					/* buffer registration err */
 		};
 		struct { /* SMC-D */
-			unsigned short		sba_idx;
-						/* SBA index number */
-			u64			token;
-						/* DMB token number */
-			dma_addr_t		dma_addr;
-						/* DMA address */
+			unsigned short	sba_idx;
+					/* SBA index number */
+			u64		token;
+					/* DMB token number */
+			dma_addr_t	dma_addr;
+					/* DMA address */
 		};
 	};
 };
@@ -196,9 +205,9 @@ struct smc_link_group {
 	unsigned short		vlan_id;	/* vlan id of link group */
 
 	struct list_head	sndbufs[SMC_RMBE_SIZES];/* tx buffers */
-	rwlock_t		sndbufs_lock;	/* protects tx buffers */
+	struct mutex		sndbufs_lock;	/* protects tx buffers */
 	struct list_head	rmbs[SMC_RMBE_SIZES];	/* rx buffers */
-	rwlock_t		rmbs_lock;	/* protects rx buffers */
+	struct mutex		rmbs_lock;	/* protects rx buffers */
 
 	u8			id[SMC_LGR_ID_SIZE];	/* unique lgr id */
 	struct delayed_work	free_work;	/* delayed freeing of an lgr */
@@ -222,6 +231,15 @@ struct smc_link_group {
 						/* remote addr/key pairs */
 			DECLARE_BITMAP(rtokens_used_mask, SMC_RMBS_PER_LGR_MAX);
 						/* used rtoken elements */
+			u8			next_link_id;
+			struct list_head	llc_event_q;
+						/* queue for llc events */
+			spinlock_t		llc_event_q_lock;
+						/* protects llc_event_q */
+			struct work_struct	llc_event_work;
+						/* llc event worker */
+			int			llc_testlink_time;
+						/* link keep alive time */
 		};
 		struct { /* SMC-D */
 			u64			peer_gid;
@@ -285,6 +303,14 @@ static inline struct smc_connection *smc_lgr_find_conn(
 	return res;
 }
 
+/* returns true if the specified link is usable */
+static inline bool smc_link_usable(struct smc_link *lnk)
+{
+	if (lnk->state == SMC_LNK_UNUSED || lnk->state == SMC_LNK_INACTIVE)
+		return false;
+	return true;
+}
+
 struct smc_sock;
 struct smc_clc_msg_accept_confirm;
 struct smc_clc_msg_local;
@@ -299,10 +325,10 @@ void smc_smcd_terminate_all(struct smcd_dev *dev);
 void smc_smcr_terminate_all(struct smc_ib_device *smcibdev);
 int smc_buf_create(struct smc_sock *smc, bool is_smcd);
 int smc_uncompress_bufsize(u8 compressed);
-int smc_rmb_rtoken_handling(struct smc_connection *conn,
+int smc_rmb_rtoken_handling(struct smc_connection *conn, struct smc_link *link,
 			    struct smc_clc_msg_accept_confirm *clc);
-int smc_rtoken_add(struct smc_link_group *lgr, __be64 nw_vaddr, __be32 nw_rkey);
-int smc_rtoken_delete(struct smc_link_group *lgr, __be32 nw_rkey);
+int smc_rtoken_add(struct smc_link *lnk, __be64 nw_vaddr, __be32 nw_rkey);
+int smc_rtoken_delete(struct smc_link *lnk, __be32 nw_rkey);
 void smc_sndbuf_sync_sg_for_cpu(struct smc_connection *conn);
 void smc_sndbuf_sync_sg_for_device(struct smc_connection *conn);
 void smc_rmb_sync_sg_for_cpu(struct smc_connection *conn);
@@ -317,6 +343,6 @@ void smc_core_exit(void);
 
 static inline struct smc_link_group *smc_get_lgr(struct smc_link *link)
 {
-	return container_of(link, struct smc_link_group, lnk[SMC_SINGLE_LINK]);
+	return link->lgr;
 }
 #endif
diff --git a/net/smc/smc_ib.c b/net/smc/smc_ib.c
index 04b6fefb8bce..699c9051bb9f 100644
--- a/net/smc/smc_ib.c
+++ b/net/smc/smc_ib.c
@@ -389,15 +389,15 @@ void smc_ib_put_memory_region(struct ib_mr *mr)
 	ib_dereg_mr(mr);
 }
 
-static int smc_ib_map_mr_sg(struct smc_buf_desc *buf_slot)
+static int smc_ib_map_mr_sg(struct smc_buf_desc *buf_slot, u8 link_idx)
 {
 	unsigned int offset = 0;
 	int sg_num;
 
 	/* map the largest prefix of a dma mapped SG list */
-	sg_num = ib_map_mr_sg(buf_slot->mr_rx[SMC_SINGLE_LINK],
-			      buf_slot->sgt[SMC_SINGLE_LINK].sgl,
-			      buf_slot->sgt[SMC_SINGLE_LINK].orig_nents,
+	sg_num = ib_map_mr_sg(buf_slot->mr_rx[link_idx],
+			      buf_slot->sgt[link_idx].sgl,
+			      buf_slot->sgt[link_idx].orig_nents,
 			      &offset, PAGE_SIZE);
 
 	return sg_num;
@@ -405,29 +405,29 @@ static int smc_ib_map_mr_sg(struct smc_buf_desc *buf_slot)
 
 /* Allocate a memory region and map the dma mapped SG list of buf_slot */
 int smc_ib_get_memory_region(struct ib_pd *pd, int access_flags,
-			     struct smc_buf_desc *buf_slot)
+			     struct smc_buf_desc *buf_slot, u8 link_idx)
 {
-	if (buf_slot->mr_rx[SMC_SINGLE_LINK])
+	if (buf_slot->mr_rx[link_idx])
 		return 0; /* already done */
 
-	buf_slot->mr_rx[SMC_SINGLE_LINK] =
+	buf_slot->mr_rx[link_idx] =
 		ib_alloc_mr(pd, IB_MR_TYPE_MEM_REG, 1 << buf_slot->order);
-	if (IS_ERR(buf_slot->mr_rx[SMC_SINGLE_LINK])) {
+	if (IS_ERR(buf_slot->mr_rx[link_idx])) {
 		int rc;
 
-		rc = PTR_ERR(buf_slot->mr_rx[SMC_SINGLE_LINK]);
-		buf_slot->mr_rx[SMC_SINGLE_LINK] = NULL;
+		rc = PTR_ERR(buf_slot->mr_rx[link_idx]);
+		buf_slot->mr_rx[link_idx] = NULL;
 		return rc;
 	}
 
-	if (smc_ib_map_mr_sg(buf_slot) != 1)
+	if (smc_ib_map_mr_sg(buf_slot, link_idx) != 1)
 		return -EINVAL;
 
 	return 0;
 }
 
 /* synchronize buffer usage for cpu access */
-void smc_ib_sync_sg_for_cpu(struct smc_ib_device *smcibdev,
+void smc_ib_sync_sg_for_cpu(struct smc_link *lnk,
 			    struct smc_buf_desc *buf_slot,
 			    enum dma_data_direction data_direction)
 {
@@ -435,11 +435,11 @@ void smc_ib_sync_sg_for_cpu(struct smc_ib_device *smcibdev,
 	unsigned int i;
 
 	/* for now there is just one DMA address */
-	for_each_sg(buf_slot->sgt[SMC_SINGLE_LINK].sgl, sg,
-		    buf_slot->sgt[SMC_SINGLE_LINK].nents, i) {
+	for_each_sg(buf_slot->sgt[lnk->link_idx].sgl, sg,
+		    buf_slot->sgt[lnk->link_idx].nents, i) {
 		if (!sg_dma_len(sg))
 			break;
-		ib_dma_sync_single_for_cpu(smcibdev->ibdev,
+		ib_dma_sync_single_for_cpu(lnk->smcibdev->ibdev,
 					   sg_dma_address(sg),
 					   sg_dma_len(sg),
 					   data_direction);
@@ -447,7 +447,7 @@ void smc_ib_sync_sg_for_cpu(struct smc_ib_device *smcibdev,
 }
 
 /* synchronize buffer usage for device access */
-void smc_ib_sync_sg_for_device(struct smc_ib_device *smcibdev,
+void smc_ib_sync_sg_for_device(struct smc_link *lnk,
 			       struct smc_buf_desc *buf_slot,
 			       enum dma_data_direction data_direction)
 {
@@ -455,11 +455,11 @@ void smc_ib_sync_sg_for_device(struct smc_ib_device *smcibdev,
 	unsigned int i;
 
 	/* for now there is just one DMA address */
-	for_each_sg(buf_slot->sgt[SMC_SINGLE_LINK].sgl, sg,
-		    buf_slot->sgt[SMC_SINGLE_LINK].nents, i) {
+	for_each_sg(buf_slot->sgt[lnk->link_idx].sgl, sg,
+		    buf_slot->sgt[lnk->link_idx].nents, i) {
 		if (!sg_dma_len(sg))
 			break;
-		ib_dma_sync_single_for_device(smcibdev->ibdev,
+		ib_dma_sync_single_for_device(lnk->smcibdev->ibdev,
 					      sg_dma_address(sg),
 					      sg_dma_len(sg),
 					      data_direction);
@@ -467,15 +467,15 @@ void smc_ib_sync_sg_for_device(struct smc_ib_device *smcibdev,
 }
 
 /* Map a new TX or RX buffer SG-table to DMA */
-int smc_ib_buf_map_sg(struct smc_ib_device *smcibdev,
+int smc_ib_buf_map_sg(struct smc_link *lnk,
 		      struct smc_buf_desc *buf_slot,
 		      enum dma_data_direction data_direction)
 {
 	int mapped_nents;
 
-	mapped_nents = ib_dma_map_sg(smcibdev->ibdev,
-				     buf_slot->sgt[SMC_SINGLE_LINK].sgl,
-				     buf_slot->sgt[SMC_SINGLE_LINK].orig_nents,
+	mapped_nents = ib_dma_map_sg(lnk->smcibdev->ibdev,
+				     buf_slot->sgt[lnk->link_idx].sgl,
+				     buf_slot->sgt[lnk->link_idx].orig_nents,
 				     data_direction);
 	if (!mapped_nents)
 		return -ENOMEM;
@@ -483,18 +483,18 @@ int smc_ib_buf_map_sg(struct smc_ib_device *smcibdev,
 	return mapped_nents;
 }
 
-void smc_ib_buf_unmap_sg(struct smc_ib_device *smcibdev,
+void smc_ib_buf_unmap_sg(struct smc_link *lnk,
 			 struct smc_buf_desc *buf_slot,
 			 enum dma_data_direction data_direction)
 {
-	if (!buf_slot->sgt[SMC_SINGLE_LINK].sgl->dma_address)
+	if (!buf_slot->sgt[lnk->link_idx].sgl->dma_address)
 		return; /* already unmapped */
 
-	ib_dma_unmap_sg(smcibdev->ibdev,
-			buf_slot->sgt[SMC_SINGLE_LINK].sgl,
-			buf_slot->sgt[SMC_SINGLE_LINK].orig_nents,
+	ib_dma_unmap_sg(lnk->smcibdev->ibdev,
+			buf_slot->sgt[lnk->link_idx].sgl,
+			buf_slot->sgt[lnk->link_idx].orig_nents,
 			data_direction);
-	buf_slot->sgt[SMC_SINGLE_LINK].sgl->dma_address = 0;
+	buf_slot->sgt[lnk->link_idx].sgl->dma_address = 0;
 }
 
 long smc_ib_setup_per_ibdev(struct smc_ib_device *smcibdev)
@@ -579,8 +579,9 @@ static void smc_ib_add_dev(struct ib_device *ibdev)
 	     i++) {
 		set_bit(i, &smcibdev->port_event_mask);
 		/* determine pnetids of the port */
-		smc_pnetid_by_dev_port(ibdev->dev.parent, i,
-				       smcibdev->pnetid[i]);
+		if (smc_pnetid_by_dev_port(ibdev->dev.parent, i,
+					   smcibdev->pnetid[i]))
+			smc_pnetid_by_table_ib(smcibdev, i + 1);
 	}
 	schedule_work(&smcibdev->port_event_work);
 }
@@ -588,9 +589,8 @@ static void smc_ib_add_dev(struct ib_device *ibdev)
 /* callback function for ib_unregister_client() */
 static void smc_ib_remove_dev(struct ib_device *ibdev, void *client_data)
 {
-	struct smc_ib_device *smcibdev;
+	struct smc_ib_device *smcibdev = client_data;
 
-	smcibdev = ib_get_client_data(ibdev, &smc_ib_client);
 	if (!smcibdev || smcibdev->ibdev != ibdev)
 		return;
 	ib_set_client_data(ibdev, &smc_ib_client, NULL);
diff --git a/net/smc/smc_ib.h b/net/smc/smc_ib.h
index 5c2b115d36da..e6a696ae15f3 100644
--- a/net/smc/smc_ib.h
+++ b/net/smc/smc_ib.h
@@ -59,10 +59,10 @@ struct smc_link;
 int smc_ib_register_client(void) __init;
 void smc_ib_unregister_client(void);
 bool smc_ib_port_active(struct smc_ib_device *smcibdev, u8 ibport);
-int smc_ib_buf_map_sg(struct smc_ib_device *smcibdev,
+int smc_ib_buf_map_sg(struct smc_link *lnk,
 		      struct smc_buf_desc *buf_slot,
 		      enum dma_data_direction data_direction);
-void smc_ib_buf_unmap_sg(struct smc_ib_device *smcibdev,
+void smc_ib_buf_unmap_sg(struct smc_link *lnk,
 			 struct smc_buf_desc *buf_slot,
 			 enum dma_data_direction data_direction);
 void smc_ib_dealloc_protection_domain(struct smc_link *lnk);
@@ -74,12 +74,12 @@ int smc_ib_modify_qp_rts(struct smc_link *lnk);
 int smc_ib_modify_qp_reset(struct smc_link *lnk);
 long smc_ib_setup_per_ibdev(struct smc_ib_device *smcibdev);
 int smc_ib_get_memory_region(struct ib_pd *pd, int access_flags,
-			     struct smc_buf_desc *buf_slot);
+			     struct smc_buf_desc *buf_slot, u8 link_idx);
 void smc_ib_put_memory_region(struct ib_mr *mr);
-void smc_ib_sync_sg_for_cpu(struct smc_ib_device *smcibdev,
+void smc_ib_sync_sg_for_cpu(struct smc_link *lnk,
 			    struct smc_buf_desc *buf_slot,
 			    enum dma_data_direction data_direction);
-void smc_ib_sync_sg_for_device(struct smc_ib_device *smcibdev,
+void smc_ib_sync_sg_for_device(struct smc_link *lnk,
 			       struct smc_buf_desc *buf_slot,
 			       enum dma_data_direction data_direction);
 int smc_ib_determine_gid(struct smc_ib_device *smcibdev, u8 ibport,
diff --git a/net/smc/smc_ism.c b/net/smc/smc_ism.c
index 5c4727d5066e..32be2da2cb85 100644
--- a/net/smc/smc_ism.c
+++ b/net/smc/smc_ism.c
@@ -296,7 +296,8 @@ struct smcd_dev *smcd_alloc_dev(struct device *parent, const char *name,
 	device_initialize(&smcd->dev);
 	dev_set_name(&smcd->dev, name);
 	smcd->ops = ops;
-	smc_pnetid_by_dev_port(parent, 0, smcd->pnetid);
+	if (smc_pnetid_by_dev_port(parent, 0, smcd->pnetid))
+		smc_pnetid_by_table_smcd(smcd);
 
 	spin_lock_init(&smcd->lock);
 	spin_lock_init(&smcd->lgr_lock);
diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c
index 0e52aab53d97..e715dd6735ee 100644
--- a/net/smc/smc_llc.c
+++ b/net/smc/smc_llc.c
@@ -134,6 +134,12 @@ union smc_llc_msg {
 
 #define SMC_LLC_FLAG_RESP		0x80
 
+struct smc_llc_qentry {
+	struct list_head list;
+	struct smc_link *link;
+	union smc_llc_msg msg;
+};
+
 /********************************** send *************************************/
 
 struct smc_llc_tx_pend {
@@ -231,9 +237,9 @@ static int smc_llc_send_confirm_rkey(struct smc_link *link,
 	rkeyllc->hd.common.type = SMC_LLC_CONFIRM_RKEY;
 	rkeyllc->hd.length = sizeof(struct smc_llc_msg_confirm_rkey);
 	rkeyllc->rtoken[0].rmb_key =
-		htonl(rmb_desc->mr_rx[SMC_SINGLE_LINK]->rkey);
+		htonl(rmb_desc->mr_rx[link->link_idx]->rkey);
 	rkeyllc->rtoken[0].rmb_vaddr = cpu_to_be64(
-		(u64)sg_dma_address(rmb_desc->sgt[SMC_SINGLE_LINK].sgl));
+		(u64)sg_dma_address(rmb_desc->sgt[link->link_idx].sgl));
 	/* send llc message */
 	rc = smc_wr_tx_send(link, pend);
 	return rc;
@@ -256,7 +262,7 @@ static int smc_llc_send_delete_rkey(struct smc_link *link,
 	rkeyllc->hd.common.type = SMC_LLC_DELETE_RKEY;
 	rkeyllc->hd.length = sizeof(struct smc_llc_msg_delete_rkey);
 	rkeyllc->num_rkeys = 1;
-	rkeyllc->rkey[0] = htonl(rmb_desc->mr_rx[SMC_SINGLE_LINK]->rkey);
+	rkeyllc->rkey[0] = htonl(rmb_desc->mr_rx[link->link_idx]->rkey);
 	/* send llc message */
 	rc = smc_wr_tx_send(link, pend);
 	return rc;
@@ -356,46 +362,20 @@ static int smc_llc_send_test_link(struct smc_link *link, u8 user_data[16])
 	return rc;
 }
 
-struct smc_llc_send_work {
-	struct work_struct work;
-	struct smc_link *link;
-	int llclen;
-	union smc_llc_msg llcbuf;
-};
-
-/* worker that sends a prepared message */
-static void smc_llc_send_message_work(struct work_struct *work)
+/* schedule an llc send on link, may wait for buffers */
+static int smc_llc_send_message(struct smc_link *link, void *llcbuf)
 {
-	struct smc_llc_send_work *llcwrk = container_of(work,
-						struct smc_llc_send_work, work);
 	struct smc_wr_tx_pend_priv *pend;
 	struct smc_wr_buf *wr_buf;
 	int rc;
 
-	if (llcwrk->link->state == SMC_LNK_INACTIVE)
-		goto out;
-	rc = smc_llc_add_pending_send(llcwrk->link, &wr_buf, &pend);
+	if (!smc_link_usable(link))
+		return -ENOLINK;
+	rc = smc_llc_add_pending_send(link, &wr_buf, &pend);
 	if (rc)
-		goto out;
-	memcpy(wr_buf, &llcwrk->llcbuf, llcwrk->llclen);
-	smc_wr_tx_send(llcwrk->link, pend);
-out:
-	kfree(llcwrk);
-}
-
-/* copy llcbuf and schedule an llc send on link */
-static int smc_llc_send_message(struct smc_link *link, void *llcbuf, int llclen)
-{
-	struct smc_llc_send_work *wrk = kmalloc(sizeof(*wrk), GFP_ATOMIC);
-
-	if (!wrk)
-		return -ENOMEM;
-	INIT_WORK(&wrk->work, smc_llc_send_message_work);
-	wrk->link = link;
-	wrk->llclen = llclen;
-	memcpy(&wrk->llcbuf, llcbuf, llclen);
-	queue_work(link->llc_wq, &wrk->work);
-	return 0;
+		return rc;
+	memcpy(wr_buf, llcbuf, sizeof(union smc_llc_msg));
+	return smc_wr_tx_send(link, pend);
 }
 
 /********************************* receive ***********************************/
@@ -404,27 +384,17 @@ static void smc_llc_rx_confirm_link(struct smc_link *link,
 				    struct smc_llc_msg_confirm_link *llc)
 {
 	struct smc_link_group *lgr = smc_get_lgr(link);
-	int conf_rc;
+	int conf_rc = 0;
 
 	/* RMBE eyecatchers are not supported */
-	if (llc->hd.flags & SMC_LLC_FLAG_NO_RMBE_EYEC)
-		conf_rc = 0;
-	else
+	if (!(llc->hd.flags & SMC_LLC_FLAG_NO_RMBE_EYEC))
 		conf_rc = ENOTSUPP;
 
-	if (llc->hd.flags & SMC_LLC_FLAG_RESP) {
-		if (lgr->role == SMC_SERV &&
-		    link->state == SMC_LNK_ACTIVATING) {
-			link->llc_confirm_resp_rc = conf_rc;
-			complete(&link->llc_confirm_resp);
-		}
-	} else {
-		if (lgr->role == SMC_CLNT &&
-		    link->state == SMC_LNK_ACTIVATING) {
-			link->llc_confirm_rc = conf_rc;
-			link->link_id = llc->link_num;
-			complete(&link->llc_confirm);
-		}
+	if (lgr->role == SMC_CLNT &&
+	    link->state == SMC_LNK_ACTIVATING) {
+		link->llc_confirm_rc = conf_rc;
+		link->link_id = llc->link_num;
+		complete(&link->llc_confirm);
 	}
 }
 
@@ -433,27 +403,22 @@ static void smc_llc_rx_add_link(struct smc_link *link,
 {
 	struct smc_link_group *lgr = smc_get_lgr(link);
 
-	if (llc->hd.flags & SMC_LLC_FLAG_RESP) {
-		if (link->state == SMC_LNK_ACTIVATING)
-			complete(&link->llc_add_resp);
-	} else {
-		if (link->state == SMC_LNK_ACTIVATING) {
-			complete(&link->llc_add);
-			return;
-		}
+	if (link->state == SMC_LNK_ACTIVATING) {
+		complete(&link->llc_add);
+		return;
+	}
 
-		if (lgr->role == SMC_SERV) {
-			smc_llc_prep_add_link(llc, link,
-					link->smcibdev->mac[link->ibport - 1],
-					link->gid, SMC_LLC_REQ);
+	if (lgr->role == SMC_SERV) {
+		smc_llc_prep_add_link(llc, link,
+				link->smcibdev->mac[link->ibport - 1],
+				link->gid, SMC_LLC_REQ);
 
-		} else {
-			smc_llc_prep_add_link(llc, link,
-					link->smcibdev->mac[link->ibport - 1],
-					link->gid, SMC_LLC_RESP);
-		}
-		smc_llc_send_message(link, llc, sizeof(*llc));
+	} else {
+		smc_llc_prep_add_link(llc, link,
+				link->smcibdev->mac[link->ibport - 1],
+				link->gid, SMC_LLC_RESP);
 	}
+	smc_llc_send_message(link, llc);
 }
 
 static void smc_llc_rx_delete_link(struct smc_link *link,
@@ -461,34 +426,24 @@ static void smc_llc_rx_delete_link(struct smc_link *link,
 {
 	struct smc_link_group *lgr = smc_get_lgr(link);
 
-	if (llc->hd.flags & SMC_LLC_FLAG_RESP) {
-		if (lgr->role == SMC_SERV)
-			smc_lgr_schedule_free_work_fast(lgr);
+	smc_lgr_forget(lgr);
+	smc_llc_link_deleting(link);
+	if (lgr->role == SMC_SERV) {
+		/* client asks to delete this link, send request */
+		smc_llc_prep_delete_link(llc, link, SMC_LLC_REQ, true);
 	} else {
-		smc_lgr_forget(lgr);
-		smc_llc_link_deleting(link);
-		if (lgr->role == SMC_SERV) {
-			/* client asks to delete this link, send request */
-			smc_llc_prep_delete_link(llc, link, SMC_LLC_REQ, true);
-		} else {
-			/* server requests to delete this link, send response */
-			smc_llc_prep_delete_link(llc, link, SMC_LLC_RESP, true);
-		}
-		smc_llc_send_message(link, llc, sizeof(*llc));
-		smc_lgr_terminate_sched(lgr);
+		/* server requests to delete this link, send response */
+		smc_llc_prep_delete_link(llc, link, SMC_LLC_RESP, true);
 	}
+	smc_llc_send_message(link, llc);
+	smc_lgr_terminate_sched(lgr);
 }
 
 static void smc_llc_rx_test_link(struct smc_link *link,
 				 struct smc_llc_msg_test_link *llc)
 {
-	if (llc->hd.flags & SMC_LLC_FLAG_RESP) {
-		if (link->state == SMC_LNK_ACTIVE)
-			complete(&link->llc_testlink_resp);
-	} else {
-		llc->hd.flags |= SMC_LLC_FLAG_RESP;
-		smc_llc_send_message(link, llc, sizeof(*llc));
-	}
+	llc->hd.flags |= SMC_LLC_FLAG_RESP;
+	smc_llc_send_message(link, llc);
 }
 
 static void smc_llc_rx_confirm_rkey(struct smc_link *link,
@@ -496,34 +451,24 @@ static void smc_llc_rx_confirm_rkey(struct smc_link *link,
 {
 	int rc;
 
-	if (llc->hd.flags & SMC_LLC_FLAG_RESP) {
-		link->llc_confirm_rkey_rc = llc->hd.flags &
-					    SMC_LLC_FLAG_RKEY_NEG;
-		complete(&link->llc_confirm_rkey);
-	} else {
-		rc = smc_rtoken_add(smc_get_lgr(link),
-				    llc->rtoken[0].rmb_vaddr,
-				    llc->rtoken[0].rmb_key);
+	rc = smc_rtoken_add(link,
+			    llc->rtoken[0].rmb_vaddr,
+			    llc->rtoken[0].rmb_key);
 
-		/* ignore rtokens for other links, we have only one link */
+	/* ignore rtokens for other links, we have only one link */
 
-		llc->hd.flags |= SMC_LLC_FLAG_RESP;
-		if (rc < 0)
-			llc->hd.flags |= SMC_LLC_FLAG_RKEY_NEG;
-		smc_llc_send_message(link, llc, sizeof(*llc));
-	}
+	llc->hd.flags |= SMC_LLC_FLAG_RESP;
+	if (rc < 0)
+		llc->hd.flags |= SMC_LLC_FLAG_RKEY_NEG;
+	smc_llc_send_message(link, llc);
 }
 
 static void smc_llc_rx_confirm_rkey_cont(struct smc_link *link,
 				      struct smc_llc_msg_confirm_rkey_cont *llc)
 {
-	if (llc->hd.flags & SMC_LLC_FLAG_RESP) {
-		/* unused as long as we don't send this type of msg */
-	} else {
-		/* ignore rtokens for other links, we have only one link */
-		llc->hd.flags |= SMC_LLC_FLAG_RESP;
-		smc_llc_send_message(link, llc, sizeof(*llc));
-	}
+	/* ignore rtokens for other links, we have only one link */
+	llc->hd.flags |= SMC_LLC_FLAG_RESP;
+	smc_llc_send_message(link, llc);
 }
 
 static void smc_llc_rx_delete_rkey(struct smc_link *link,
@@ -532,38 +477,41 @@ static void smc_llc_rx_delete_rkey(struct smc_link *link,
 	u8 err_mask = 0;
 	int i, max;
 
-	if (llc->hd.flags & SMC_LLC_FLAG_RESP) {
-		link->llc_delete_rkey_rc = llc->hd.flags &
-					    SMC_LLC_FLAG_RKEY_NEG;
-		complete(&link->llc_delete_rkey);
-	} else {
-		max = min_t(u8, llc->num_rkeys, SMC_LLC_DEL_RKEY_MAX);
-		for (i = 0; i < max; i++) {
-			if (smc_rtoken_delete(smc_get_lgr(link), llc->rkey[i]))
-				err_mask |= 1 << (SMC_LLC_DEL_RKEY_MAX - 1 - i);
-		}
+	max = min_t(u8, llc->num_rkeys, SMC_LLC_DEL_RKEY_MAX);
+	for (i = 0; i < max; i++) {
+		if (smc_rtoken_delete(link, llc->rkey[i]))
+			err_mask |= 1 << (SMC_LLC_DEL_RKEY_MAX - 1 - i);
+	}
 
-		if (err_mask) {
-			llc->hd.flags |= SMC_LLC_FLAG_RKEY_NEG;
-			llc->err_mask = err_mask;
-		}
+	if (err_mask) {
+		llc->hd.flags |= SMC_LLC_FLAG_RKEY_NEG;
+		llc->err_mask = err_mask;
+	}
+
+	llc->hd.flags |= SMC_LLC_FLAG_RESP;
+	smc_llc_send_message(link, llc);
+}
+
+/* flush the llc event queue */
+static void smc_llc_event_flush(struct smc_link_group *lgr)
+{
+	struct smc_llc_qentry *qentry, *q;
 
-		llc->hd.flags |= SMC_LLC_FLAG_RESP;
-		smc_llc_send_message(link, llc, sizeof(*llc));
+	spin_lock_bh(&lgr->llc_event_q_lock);
+	list_for_each_entry_safe(qentry, q, &lgr->llc_event_q, list) {
+		list_del_init(&qentry->list);
+		kfree(qentry);
 	}
+	spin_unlock_bh(&lgr->llc_event_q_lock);
 }
 
-static void smc_llc_rx_handler(struct ib_wc *wc, void *buf)
+static void smc_llc_event_handler(struct smc_llc_qentry *qentry)
 {
-	struct smc_link *link = (struct smc_link *)wc->qp->qp_context;
-	union smc_llc_msg *llc = buf;
+	union smc_llc_msg *llc = &qentry->msg;
+	struct smc_link *link = qentry->link;
 
-	if (wc->byte_len < sizeof(*llc))
-		return; /* short message */
-	if (llc->raw.hdr.length != sizeof(*llc))
-		return; /* invalid message */
-	if (link->state == SMC_LNK_INACTIVE)
-		return; /* link not active, drop msg */
+	if (!smc_link_usable(link))
+		goto out;
 
 	switch (llc->raw.hdr.common.type) {
 	case SMC_LLC_TEST_LINK:
@@ -588,6 +536,103 @@ static void smc_llc_rx_handler(struct ib_wc *wc, void *buf)
 		smc_llc_rx_delete_rkey(link, &llc->delete_rkey);
 		break;
 	}
+out:
+	kfree(qentry);
+}
+
+/* worker to process llc messages on the event queue */
+static void smc_llc_event_work(struct work_struct *work)
+{
+	struct smc_link_group *lgr = container_of(work, struct smc_link_group,
+						  llc_event_work);
+	struct smc_llc_qentry *qentry;
+
+again:
+	spin_lock_bh(&lgr->llc_event_q_lock);
+	if (!list_empty(&lgr->llc_event_q)) {
+		qentry = list_first_entry(&lgr->llc_event_q,
+					  struct smc_llc_qentry, list);
+		list_del_init(&qentry->list);
+		spin_unlock_bh(&lgr->llc_event_q_lock);
+		smc_llc_event_handler(qentry);
+		goto again;
+	}
+	spin_unlock_bh(&lgr->llc_event_q_lock);
+}
+
+/* process llc responses in tasklet context */
+static void smc_llc_rx_response(struct smc_link *link, union smc_llc_msg *llc)
+{
+	int rc = 0;
+
+	switch (llc->raw.hdr.common.type) {
+	case SMC_LLC_TEST_LINK:
+		if (link->state == SMC_LNK_ACTIVE)
+			complete(&link->llc_testlink_resp);
+		break;
+	case SMC_LLC_CONFIRM_LINK:
+		if (!(llc->raw.hdr.flags & SMC_LLC_FLAG_NO_RMBE_EYEC))
+			rc = ENOTSUPP;
+		if (link->lgr->role == SMC_SERV &&
+		    link->state == SMC_LNK_ACTIVATING) {
+			link->llc_confirm_resp_rc = rc;
+			complete(&link->llc_confirm_resp);
+		}
+		break;
+	case SMC_LLC_ADD_LINK:
+		if (link->state == SMC_LNK_ACTIVATING)
+			complete(&link->llc_add_resp);
+		break;
+	case SMC_LLC_DELETE_LINK:
+		if (link->lgr->role == SMC_SERV)
+			smc_lgr_schedule_free_work_fast(link->lgr);
+		break;
+	case SMC_LLC_CONFIRM_RKEY:
+		link->llc_confirm_rkey_resp_rc = llc->raw.hdr.flags &
+						 SMC_LLC_FLAG_RKEY_NEG;
+		complete(&link->llc_confirm_rkey_resp);
+		break;
+	case SMC_LLC_CONFIRM_RKEY_CONT:
+		/* unused as long as we don't send this type of msg */
+		break;
+	case SMC_LLC_DELETE_RKEY:
+		link->llc_delete_rkey_resp_rc = llc->raw.hdr.flags &
+						SMC_LLC_FLAG_RKEY_NEG;
+		complete(&link->llc_delete_rkey_resp);
+		break;
+	}
+}
+
+/* copy received msg and add it to the event queue */
+static void smc_llc_rx_handler(struct ib_wc *wc, void *buf)
+{
+	struct smc_link *link = (struct smc_link *)wc->qp->qp_context;
+	struct smc_link_group *lgr = link->lgr;
+	struct smc_llc_qentry *qentry;
+	union smc_llc_msg *llc = buf;
+	unsigned long flags;
+
+	if (wc->byte_len < sizeof(*llc))
+		return; /* short message */
+	if (llc->raw.hdr.length != sizeof(*llc))
+		return; /* invalid message */
+
+	/* process responses immediately */
+	if (llc->raw.hdr.flags & SMC_LLC_FLAG_RESP) {
+		smc_llc_rx_response(link, llc);
+		return;
+	}
+
+	qentry = kmalloc(sizeof(*qentry), GFP_ATOMIC);
+	if (!qentry)
+		return;
+	qentry->link = link;
+	INIT_LIST_HEAD(&qentry->list);
+	memcpy(&qentry->msg, llc, sizeof(union smc_llc_msg));
+	spin_lock_irqsave(&lgr->llc_event_q_lock, flags);
+	list_add_tail(&qentry->list, &lgr->llc_event_q);
+	spin_unlock_irqrestore(&lgr->llc_event_q_lock, flags);
+	schedule_work(&link->lgr->llc_event_work);
 }
 
 /***************************** worker, utils *********************************/
@@ -613,43 +658,55 @@ static void smc_llc_testlink_work(struct work_struct *work)
 	/* receive TEST LINK response over RoCE fabric */
 	rc = wait_for_completion_interruptible_timeout(&link->llc_testlink_resp,
 						       SMC_LLC_WAIT_TIME);
+	if (link->state != SMC_LNK_ACTIVE)
+		return;		/* link state changed */
 	if (rc <= 0) {
 		smc_lgr_terminate_sched(smc_get_lgr(link));
 		return;
 	}
 	next_interval = link->llc_testlink_time;
 out:
-	queue_delayed_work(link->llc_wq, &link->llc_testlink_wrk,
-			   next_interval);
+	schedule_delayed_work(&link->llc_testlink_wrk, next_interval);
+}
+
+void smc_llc_lgr_init(struct smc_link_group *lgr, struct smc_sock *smc)
+{
+	struct net *net = sock_net(smc->clcsock->sk);
+
+	INIT_WORK(&lgr->llc_event_work, smc_llc_event_work);
+	INIT_LIST_HEAD(&lgr->llc_event_q);
+	spin_lock_init(&lgr->llc_event_q_lock);
+	lgr->llc_testlink_time = net->ipv4.sysctl_tcp_keepalive_time;
+}
+
+/* called after lgr was removed from lgr_list */
+void smc_llc_lgr_clear(struct smc_link_group *lgr)
+{
+	smc_llc_event_flush(lgr);
+	cancel_work_sync(&lgr->llc_event_work);
 }
 
 int smc_llc_link_init(struct smc_link *link)
 {
-	struct smc_link_group *lgr = smc_get_lgr(link);
-	link->llc_wq = alloc_ordered_workqueue("llc_wq-%x:%x)", WQ_MEM_RECLAIM,
-					       *((u32 *)lgr->id),
-					       link->link_id);
-	if (!link->llc_wq)
-		return -ENOMEM;
 	init_completion(&link->llc_confirm);
 	init_completion(&link->llc_confirm_resp);
 	init_completion(&link->llc_add);
 	init_completion(&link->llc_add_resp);
-	init_completion(&link->llc_confirm_rkey);
-	init_completion(&link->llc_delete_rkey);
+	init_completion(&link->llc_confirm_rkey_resp);
+	init_completion(&link->llc_delete_rkey_resp);
 	mutex_init(&link->llc_delete_rkey_mutex);
 	init_completion(&link->llc_testlink_resp);
 	INIT_DELAYED_WORK(&link->llc_testlink_wrk, smc_llc_testlink_work);
 	return 0;
 }
 
-void smc_llc_link_active(struct smc_link *link, int testlink_time)
+void smc_llc_link_active(struct smc_link *link)
 {
 	link->state = SMC_LNK_ACTIVE;
-	if (testlink_time) {
-		link->llc_testlink_time = testlink_time * HZ;
-		queue_delayed_work(link->llc_wq, &link->llc_testlink_wrk,
-				   link->llc_testlink_time);
+	if (link->lgr->llc_testlink_time) {
+		link->llc_testlink_time = link->lgr->llc_testlink_time * HZ;
+		schedule_delayed_work(&link->llc_testlink_wrk,
+				      link->llc_testlink_time);
 	}
 }
 
@@ -659,20 +716,13 @@ void smc_llc_link_deleting(struct smc_link *link)
 	smc_wr_wakeup_tx_wait(link);
 }
 
-/* called in tasklet context */
-void smc_llc_link_inactive(struct smc_link *link)
-{
-	link->state = SMC_LNK_INACTIVE;
-	cancel_delayed_work(&link->llc_testlink_wrk);
-	smc_wr_wakeup_reg_wait(link);
-	smc_wr_wakeup_tx_wait(link);
-}
-
 /* called in worker context */
 void smc_llc_link_clear(struct smc_link *link)
 {
-	flush_workqueue(link->llc_wq);
-	destroy_workqueue(link->llc_wq);
+	complete(&link->llc_testlink_resp);
+	cancel_delayed_work_sync(&link->llc_testlink_wrk);
+	smc_wr_wakeup_reg_wait(link);
+	smc_wr_wakeup_tx_wait(link);
 }
 
 /* register a new rtoken at the remote peer */
@@ -682,14 +732,14 @@ int smc_llc_do_confirm_rkey(struct smc_link *link,
 	int rc;
 
 	/* protected by mutex smc_create_lgr_pending */
-	reinit_completion(&link->llc_confirm_rkey);
+	reinit_completion(&link->llc_confirm_rkey_resp);
 	rc = smc_llc_send_confirm_rkey(link, rmb_desc);
 	if (rc)
 		return rc;
 	/* receive CONFIRM RKEY response from server over RoCE fabric */
-	rc = wait_for_completion_interruptible_timeout(&link->llc_confirm_rkey,
-						       SMC_LLC_WAIT_TIME);
-	if (rc <= 0 || link->llc_confirm_rkey_rc)
+	rc = wait_for_completion_interruptible_timeout(
+			&link->llc_confirm_rkey_resp, SMC_LLC_WAIT_TIME);
+	if (rc <= 0 || link->llc_confirm_rkey_resp_rc)
 		return -EFAULT;
 	return 0;
 }
@@ -703,14 +753,14 @@ int smc_llc_do_delete_rkey(struct smc_link *link,
 	mutex_lock(&link->llc_delete_rkey_mutex);
 	if (link->state != SMC_LNK_ACTIVE)
 		goto out;
-	reinit_completion(&link->llc_delete_rkey);
+	reinit_completion(&link->llc_delete_rkey_resp);
 	rc = smc_llc_send_delete_rkey(link, rmb_desc);
 	if (rc)
 		goto out;
 	/* receive DELETE RKEY response from server over RoCE fabric */
-	rc = wait_for_completion_interruptible_timeout(&link->llc_delete_rkey,
-						       SMC_LLC_WAIT_TIME);
-	if (rc <= 0 || link->llc_delete_rkey_rc)
+	rc = wait_for_completion_interruptible_timeout(
+			&link->llc_delete_rkey_resp, SMC_LLC_WAIT_TIME);
+	if (rc <= 0 || link->llc_delete_rkey_resp_rc)
 		rc = -EFAULT;
 	else
 		rc = 0;
diff --git a/net/smc/smc_llc.h b/net/smc/smc_llc.h
index 461c0c3ef76e..66063f22166b 100644
--- a/net/smc/smc_llc.h
+++ b/net/smc/smc_llc.h
@@ -35,6 +35,17 @@ enum smc_llc_msg_type {
 	SMC_LLC_DELETE_RKEY		= 0x09,
 };
 
+/* returns a usable link of the link group, or NULL */
+static inline struct smc_link *smc_llc_usable_link(struct smc_link_group *lgr)
+{
+	int i;
+
+	for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++)
+		if (smc_link_usable(&lgr->lnk[i]))
+			return &lgr->lnk[i];
+	return NULL;
+}
+
 /* transmit */
 int smc_llc_send_confirm_link(struct smc_link *lnk,
 			      enum smc_llc_reqresp reqresp);
@@ -42,10 +53,11 @@ int smc_llc_send_add_link(struct smc_link *link, u8 mac[], u8 gid[],
 			  enum smc_llc_reqresp reqresp);
 int smc_llc_send_delete_link(struct smc_link *link,
 			     enum smc_llc_reqresp reqresp, bool orderly);
+void smc_llc_lgr_init(struct smc_link_group *lgr, struct smc_sock *smc);
+void smc_llc_lgr_clear(struct smc_link_group *lgr);
 int smc_llc_link_init(struct smc_link *link);
-void smc_llc_link_active(struct smc_link *link, int testlink_time);
+void smc_llc_link_active(struct smc_link *link);
 void smc_llc_link_deleting(struct smc_link *link);
-void smc_llc_link_inactive(struct smc_link *link);
 void smc_llc_link_clear(struct smc_link *link);
 int smc_llc_do_confirm_rkey(struct smc_link *link,
 			    struct smc_buf_desc *rmb_desc);
diff --git a/net/smc/smc_pnet.c b/net/smc/smc_pnet.c
index 2a5ed47c3e08..bd01c71b827a 100644
--- a/net/smc/smc_pnet.c
+++ b/net/smc/smc_pnet.c
@@ -50,29 +50,26 @@ static struct nla_policy smc_pnet_policy[SMC_PNETID_MAX + 1] = {
 
 static struct genl_family smc_pnet_nl_family;
 
-/**
- * struct smc_user_pnetentry - pnet identifier name entry for/from user
- * @list: List node.
- * @pnet_name: Pnet identifier name
- * @ndev: pointer to network device.
- * @smcibdev: Pointer to IB device.
- * @ib_port: Port of IB device.
- * @smcd_dev: Pointer to smcd device.
- */
-struct smc_user_pnetentry {
-	struct list_head list;
-	char pnet_name[SMC_MAX_PNETID_LEN + 1];
-	struct net_device *ndev;
-	struct smc_ib_device *smcibdev;
-	u8 ib_port;
-	struct smcd_dev *smcd_dev;
+enum smc_pnet_nametype {
+	SMC_PNET_ETH	= 1,
+	SMC_PNET_IB	= 2,
 };
 
 /* pnet entry stored in pnet table */
 struct smc_pnetentry {
 	struct list_head list;
 	char pnet_name[SMC_MAX_PNETID_LEN + 1];
-	struct net_device *ndev;
+	enum smc_pnet_nametype type;
+	union {
+		struct {
+			char eth_name[IFNAMSIZ + 1];
+			struct net_device *ndev;
+		};
+		struct {
+			char ib_name[IB_DEVICE_NAME_MAX + 1];
+			u8 ib_port;
+		};
+	};
 };
 
 /* Check if two given pnetids match */
@@ -106,14 +103,15 @@ static int smc_pnet_remove_by_pnetid(struct net *net, char *pnet_name)
 	sn = net_generic(net, smc_net_id);
 	pnettable = &sn->pnettable;
 
-	/* remove netdevices */
+	/* remove table entry */
 	write_lock(&pnettable->lock);
 	list_for_each_entry_safe(pnetelem, tmp_pe, &pnettable->pnetlist,
 				 list) {
 		if (!pnet_name ||
 		    smc_pnet_match(pnetelem->pnet_name, pnet_name)) {
 			list_del(&pnetelem->list);
-			dev_put(pnetelem->ndev);
+			if (pnetelem->type == SMC_PNET_ETH && pnetelem->ndev)
+				dev_put(pnetelem->ndev);
 			kfree(pnetelem);
 			rc = 0;
 		}
@@ -155,9 +153,9 @@ static int smc_pnet_remove_by_pnetid(struct net *net, char *pnet_name)
 	return rc;
 }
 
-/* Remove a pnet entry mentioning a given network device from the pnet table.
+/* Add the reference to a given network device to the pnet table.
  */
-static int smc_pnet_remove_by_ndev(struct net_device *ndev)
+static int smc_pnet_add_by_ndev(struct net_device *ndev)
 {
 	struct smc_pnetentry *pnetelem, *tmp_pe;
 	struct smc_pnettable *pnettable;
@@ -171,10 +169,10 @@ static int smc_pnet_remove_by_ndev(struct net_device *ndev)
 
 	write_lock(&pnettable->lock);
 	list_for_each_entry_safe(pnetelem, tmp_pe, &pnettable->pnetlist, list) {
-		if (pnetelem->ndev == ndev) {
-			list_del(&pnetelem->list);
-			dev_put(pnetelem->ndev);
-			kfree(pnetelem);
+		if (pnetelem->type == SMC_PNET_ETH && !pnetelem->ndev &&
+		    !strncmp(pnetelem->eth_name, ndev->name, IFNAMSIZ)) {
+			dev_hold(ndev);
+			pnetelem->ndev = ndev;
 			rc = 0;
 			break;
 		}
@@ -183,80 +181,67 @@ static int smc_pnet_remove_by_ndev(struct net_device *ndev)
 	return rc;
 }
 
-/* Append a pnetid to the end of the pnet table if not already on this list.
+/* Remove the reference to a given network device from the pnet table.
  */
-static int smc_pnet_enter(struct smc_pnettable *pnettable,
-			  struct smc_user_pnetentry *new_pnetelem)
+static int smc_pnet_remove_by_ndev(struct net_device *ndev)
 {
-	u8 pnet_null[SMC_MAX_PNETID_LEN] = {0};
-	u8 ndev_pnetid[SMC_MAX_PNETID_LEN];
-	struct smc_pnetentry *tmp_pnetelem;
-	struct smc_pnetentry *pnetelem;
-	bool new_smcddev = false;
-	struct net_device *ndev;
-	bool new_netdev = true;
-	bool new_ibdev = false;
-
-	if (new_pnetelem->smcibdev) {
-		struct smc_ib_device *ib_dev = new_pnetelem->smcibdev;
-		int ib_port = new_pnetelem->ib_port;
+	struct smc_pnetentry *pnetelem, *tmp_pe;
+	struct smc_pnettable *pnettable;
+	struct net *net = dev_net(ndev);
+	struct smc_net *sn;
+	int rc = -ENOENT;
 
-		spin_lock(&smc_ib_devices.lock);
-		if (smc_pnet_match(ib_dev->pnetid[ib_port - 1], pnet_null)) {
-			memcpy(ib_dev->pnetid[ib_port - 1],
-			       new_pnetelem->pnet_name, SMC_MAX_PNETID_LEN);
-			ib_dev->pnetid_by_user[ib_port - 1] = true;
-			new_ibdev = true;
-		}
-		spin_unlock(&smc_ib_devices.lock);
-	}
-	if (new_pnetelem->smcd_dev) {
-		struct smcd_dev *smcd_dev = new_pnetelem->smcd_dev;
+	/* get pnettable for namespace */
+	sn = net_generic(net, smc_net_id);
+	pnettable = &sn->pnettable;
 
-		spin_lock(&smcd_dev_list.lock);
-		if (smc_pnet_match(smcd_dev->pnetid, pnet_null)) {
-			memcpy(smcd_dev->pnetid, new_pnetelem->pnet_name,
-			       SMC_MAX_PNETID_LEN);
-			smcd_dev->pnetid_by_user = true;
-			new_smcddev = true;
+	write_lock(&pnettable->lock);
+	list_for_each_entry_safe(pnetelem, tmp_pe, &pnettable->pnetlist, list) {
+		if (pnetelem->type == SMC_PNET_ETH && pnetelem->ndev == ndev) {
+			dev_put(pnetelem->ndev);
+			pnetelem->ndev = NULL;
+			rc = 0;
+			break;
 		}
-		spin_unlock(&smcd_dev_list.lock);
 	}
+	write_unlock(&pnettable->lock);
+	return rc;
+}
 
-	if (!new_pnetelem->ndev)
-		return (new_ibdev || new_smcddev) ? 0 : -EEXIST;
+/* Apply pnetid to ib device when no pnetid is set.
+ */
+static bool smc_pnet_apply_ib(struct smc_ib_device *ib_dev, u8 ib_port,
+			      char *pnet_name)
+{
+	u8 pnet_null[SMC_MAX_PNETID_LEN] = {0};
+	bool applied = false;
 
-	/* check if (base) netdev already has a pnetid. If there is one, we do
-	 * not want to add a pnet table entry
-	 */
-	ndev = pnet_find_base_ndev(new_pnetelem->ndev);
-	if (!smc_pnetid_by_dev_port(ndev->dev.parent, ndev->dev_port,
-				    ndev_pnetid))
-		return (new_ibdev || new_smcddev) ? 0 : -EEXIST;
+	spin_lock(&smc_ib_devices.lock);
+	if (smc_pnet_match(ib_dev->pnetid[ib_port - 1], pnet_null)) {
+		memcpy(ib_dev->pnetid[ib_port - 1], pnet_name,
+		       SMC_MAX_PNETID_LEN);
+		ib_dev->pnetid_by_user[ib_port - 1] = true;
+		applied = true;
+	}
+	spin_unlock(&smc_ib_devices.lock);
+	return applied;
+}
 
-	/* add a new netdev entry to the pnet table if there isn't one */
-	tmp_pnetelem = kzalloc(sizeof(*pnetelem), GFP_KERNEL);
-	if (!tmp_pnetelem)
-		return -ENOMEM;
-	memcpy(tmp_pnetelem->pnet_name, new_pnetelem->pnet_name,
-	       SMC_MAX_PNETID_LEN);
-	tmp_pnetelem->ndev = new_pnetelem->ndev;
+/* Apply pnetid to smcd device when no pnetid is set.
+ */
+static bool smc_pnet_apply_smcd(struct smcd_dev *smcd_dev, char *pnet_name)
+{
+	u8 pnet_null[SMC_MAX_PNETID_LEN] = {0};
+	bool applied = false;
 
-	write_lock(&pnettable->lock);
-	list_for_each_entry(pnetelem, &pnettable->pnetlist, list) {
-		if (pnetelem->ndev == new_pnetelem->ndev)
-			new_netdev = false;
-	}
-	if (new_netdev) {
-		dev_hold(tmp_pnetelem->ndev);
-		list_add_tail(&tmp_pnetelem->list, &pnettable->pnetlist);
-		write_unlock(&pnettable->lock);
-	} else {
-		write_unlock(&pnettable->lock);
-		kfree(tmp_pnetelem);
+	spin_lock(&smcd_dev_list.lock);
+	if (smc_pnet_match(smcd_dev->pnetid, pnet_null)) {
+		memcpy(smcd_dev->pnetid, pnet_name, SMC_MAX_PNETID_LEN);
+		smcd_dev->pnetid_by_user = true;
+		applied = true;
 	}
-
-	return (new_netdev || new_ibdev || new_smcddev) ? 0 : -EEXIST;
+	spin_unlock(&smcd_dev_list.lock);
+	return applied;
 }
 
 /* The limit for pnetid is 16 characters.
@@ -323,57 +308,167 @@ static struct smcd_dev *smc_pnet_find_smcd(char *smcd_name)
 	return smcd_dev;
 }
 
-/* Parse the supplied netlink attributes and fill a pnetentry structure.
- * For ethernet and infiniband device names verify that the devices exist.
+static int smc_pnet_add_eth(struct smc_pnettable *pnettable, struct net *net,
+			    char *eth_name, char *pnet_name)
+{
+	struct smc_pnetentry *tmp_pe, *new_pe;
+	struct net_device *ndev, *base_ndev;
+	u8 ndev_pnetid[SMC_MAX_PNETID_LEN];
+	bool new_netdev;
+	int rc;
+
+	/* check if (base) netdev already has a pnetid. If there is one, we do
+	 * not want to add a pnet table entry
+	 */
+	rc = -EEXIST;
+	ndev = dev_get_by_name(net, eth_name);	/* dev_hold() */
+	if (ndev) {
+		base_ndev = pnet_find_base_ndev(ndev);
+		if (!smc_pnetid_by_dev_port(base_ndev->dev.parent,
+					    base_ndev->dev_port, ndev_pnetid))
+			goto out_put;
+	}
+
+	/* add a new netdev entry to the pnet table if there isn't one */
+	rc = -ENOMEM;
+	new_pe = kzalloc(sizeof(*new_pe), GFP_KERNEL);
+	if (!new_pe)
+		goto out_put;
+	new_pe->type = SMC_PNET_ETH;
+	memcpy(new_pe->pnet_name, pnet_name, SMC_MAX_PNETID_LEN);
+	strncpy(new_pe->eth_name, eth_name, IFNAMSIZ);
+	new_pe->ndev = ndev;
+
+	rc = -EEXIST;
+	new_netdev = true;
+	write_lock(&pnettable->lock);
+	list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) {
+		if (tmp_pe->type == SMC_PNET_ETH &&
+		    !strncmp(tmp_pe->eth_name, eth_name, IFNAMSIZ)) {
+			new_netdev = false;
+			break;
+		}
+	}
+	if (new_netdev) {
+		list_add_tail(&new_pe->list, &pnettable->pnetlist);
+		write_unlock(&pnettable->lock);
+	} else {
+		write_unlock(&pnettable->lock);
+		kfree(new_pe);
+		goto out_put;
+	}
+	return 0;
+
+out_put:
+	if (ndev)
+		dev_put(ndev);
+	return rc;
+}
+
+static int smc_pnet_add_ib(struct smc_pnettable *pnettable, char *ib_name,
+			   u8 ib_port, char *pnet_name)
+{
+	struct smc_pnetentry *tmp_pe, *new_pe;
+	struct smc_ib_device *ib_dev;
+	bool smcddev_applied = true;
+	bool ibdev_applied = true;
+	struct smcd_dev *smcd_dev;
+	bool new_ibdev;
+
+	/* try to apply the pnetid to active devices */
+	ib_dev = smc_pnet_find_ib(ib_name);
+	if (ib_dev)
+		ibdev_applied = smc_pnet_apply_ib(ib_dev, ib_port, pnet_name);
+	smcd_dev = smc_pnet_find_smcd(ib_name);
+	if (smcd_dev)
+		smcddev_applied = smc_pnet_apply_smcd(smcd_dev, pnet_name);
+	/* Apply fails when a device has a hardware-defined pnetid set, do not
+	 * add a pnet table entry in that case.
+	 */
+	if (!ibdev_applied || !smcddev_applied)
+		return -EEXIST;
+
+	/* add a new ib entry to the pnet table if there isn't one */
+	new_pe = kzalloc(sizeof(*new_pe), GFP_KERNEL);
+	if (!new_pe)
+		return -ENOMEM;
+	new_pe->type = SMC_PNET_IB;
+	memcpy(new_pe->pnet_name, pnet_name, SMC_MAX_PNETID_LEN);
+	strncpy(new_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX);
+	new_pe->ib_port = ib_port;
+
+	new_ibdev = true;
+	write_lock(&pnettable->lock);
+	list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) {
+		if (tmp_pe->type == SMC_PNET_IB &&
+		    !strncmp(tmp_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX)) {
+			new_ibdev = false;
+			break;
+		}
+	}
+	if (new_ibdev) {
+		list_add_tail(&new_pe->list, &pnettable->pnetlist);
+		write_unlock(&pnettable->lock);
+	} else {
+		write_unlock(&pnettable->lock);
+		kfree(new_pe);
+	}
+	return (new_ibdev) ? 0 : -EEXIST;
+}
+
+/* Append a pnetid to the end of the pnet table if not already on this list.
  */
-static int smc_pnet_fill_entry(struct net *net,
-			       struct smc_user_pnetentry *pnetelem,
-			       struct nlattr *tb[])
+static int smc_pnet_enter(struct net *net, struct nlattr *tb[])
 {
-	char *string, *ibname;
+	char pnet_name[SMC_MAX_PNETID_LEN + 1];
+	struct smc_pnettable *pnettable;
+	bool new_netdev = false;
+	bool new_ibdev = false;
+	struct smc_net *sn;
+	u8 ibport = 1;
+	char *string;
 	int rc;
 
-	memset(pnetelem, 0, sizeof(*pnetelem));
-	INIT_LIST_HEAD(&pnetelem->list);
+	/* get pnettable for namespace */
+	sn = net_generic(net, smc_net_id);
+	pnettable = &sn->pnettable;
 
 	rc = -EINVAL;
 	if (!tb[SMC_PNETID_NAME])
 		goto error;
 	string = (char *)nla_data(tb[SMC_PNETID_NAME]);
-	if (!smc_pnetid_valid(string, pnetelem->pnet_name))
+	if (!smc_pnetid_valid(string, pnet_name))
 		goto error;
 
-	rc = -EINVAL;
 	if (tb[SMC_PNETID_ETHNAME]) {
 		string = (char *)nla_data(tb[SMC_PNETID_ETHNAME]);
-		pnetelem->ndev = dev_get_by_name(net, string);
-		if (!pnetelem->ndev)
+		rc = smc_pnet_add_eth(pnettable, net, string, pnet_name);
+		if (!rc)
+			new_netdev = true;
+		else if (rc != -EEXIST)
 			goto error;
 	}
 
 	/* if this is not the initial namespace, stop here */
 	if (net != &init_net)
-		return 0;
+		return new_netdev ? 0 : -EEXIST;
 
 	rc = -EINVAL;
 	if (tb[SMC_PNETID_IBNAME]) {
-		ibname = (char *)nla_data(tb[SMC_PNETID_IBNAME]);
-		ibname = strim(ibname);
-		pnetelem->smcibdev = smc_pnet_find_ib(ibname);
-		pnetelem->smcd_dev = smc_pnet_find_smcd(ibname);
-		if (!pnetelem->smcibdev && !pnetelem->smcd_dev)
-			goto error;
-		if (pnetelem->smcibdev) {
-			if (!tb[SMC_PNETID_IBPORT])
-				goto error;
-			pnetelem->ib_port = nla_get_u8(tb[SMC_PNETID_IBPORT]);
-			if (pnetelem->ib_port < 1 ||
-			    pnetelem->ib_port > SMC_MAX_PORTS)
+		string = (char *)nla_data(tb[SMC_PNETID_IBNAME]);
+		string = strim(string);
+		if (tb[SMC_PNETID_IBPORT]) {
+			ibport = nla_get_u8(tb[SMC_PNETID_IBPORT]);
+			if (ibport < 1 || ibport > SMC_MAX_PORTS)
 				goto error;
 		}
+		rc = smc_pnet_add_ib(pnettable, string, ibport, pnet_name);
+		if (!rc)
+			new_ibdev = true;
+		else if (rc != -EEXIST)
+			goto error;
 	}
-
-	return 0;
+	return (new_netdev || new_ibdev) ? 0 : -EEXIST;
 
 error:
 	return rc;
@@ -381,28 +476,22 @@ static int smc_pnet_fill_entry(struct net *net,
 
 /* Convert an smc_pnetentry to a netlink attribute sequence */
 static int smc_pnet_set_nla(struct sk_buff *msg,
-			    struct smc_user_pnetentry *pnetelem)
+			    struct smc_pnetentry *pnetelem)
 {
 	if (nla_put_string(msg, SMC_PNETID_NAME, pnetelem->pnet_name))
 		return -1;
-	if (pnetelem->ndev) {
+	if (pnetelem->type == SMC_PNET_ETH) {
 		if (nla_put_string(msg, SMC_PNETID_ETHNAME,
-				   pnetelem->ndev->name))
+				   pnetelem->eth_name))
 			return -1;
 	} else {
 		if (nla_put_string(msg, SMC_PNETID_ETHNAME, "n/a"))
 			return -1;
 	}
-	if (pnetelem->smcibdev) {
-		if (nla_put_string(msg, SMC_PNETID_IBNAME,
-			dev_name(pnetelem->smcibdev->ibdev->dev.parent)) ||
+	if (pnetelem->type == SMC_PNET_IB) {
+		if (nla_put_string(msg, SMC_PNETID_IBNAME, pnetelem->ib_name) ||
 		    nla_put_u8(msg, SMC_PNETID_IBPORT, pnetelem->ib_port))
 			return -1;
-	} else if (pnetelem->smcd_dev) {
-		if (nla_put_string(msg, SMC_PNETID_IBNAME,
-				   dev_name(&pnetelem->smcd_dev->dev)) ||
-		    nla_put_u8(msg, SMC_PNETID_IBPORT, 1))
-			return -1;
 	} else {
 		if (nla_put_string(msg, SMC_PNETID_IBNAME, "n/a") ||
 		    nla_put_u8(msg, SMC_PNETID_IBPORT, 0xff))
@@ -415,21 +504,8 @@ static int smc_pnet_set_nla(struct sk_buff *msg,
 static int smc_pnet_add(struct sk_buff *skb, struct genl_info *info)
 {
 	struct net *net = genl_info_net(info);
-	struct smc_user_pnetentry pnetelem;
-	struct smc_pnettable *pnettable;
-	struct smc_net *sn;
-	int rc;
-
-	/* get pnettable for namespace */
-	sn = net_generic(net, smc_net_id);
-	pnettable = &sn->pnettable;
 
-	rc = smc_pnet_fill_entry(net, &pnetelem, info->attrs);
-	if (!rc)
-		rc = smc_pnet_enter(pnettable, &pnetelem);
-	if (pnetelem.ndev)
-		dev_put(pnetelem.ndev);
-	return rc;
+	return smc_pnet_enter(net, info->attrs);
 }
 
 static int smc_pnet_del(struct sk_buff *skb, struct genl_info *info)
@@ -450,7 +526,7 @@ static int smc_pnet_dump_start(struct netlink_callback *cb)
 
 static int smc_pnet_dumpinfo(struct sk_buff *skb,
 			     u32 portid, u32 seq, u32 flags,
-			     struct smc_user_pnetentry *pnetelem)
+			     struct smc_pnetentry *pnetelem)
 {
 	void *hdr;
 
@@ -469,91 +545,32 @@ static int smc_pnet_dumpinfo(struct sk_buff *skb,
 static int _smc_pnet_dump(struct net *net, struct sk_buff *skb, u32 portid,
 			  u32 seq, u8 *pnetid, int start_idx)
 {
-	struct smc_user_pnetentry tmp_entry;
 	struct smc_pnettable *pnettable;
 	struct smc_pnetentry *pnetelem;
-	struct smc_ib_device *ibdev;
-	struct smcd_dev *smcd_dev;
 	struct smc_net *sn;
 	int idx = 0;
-	int ibport;
 
 	/* get pnettable for namespace */
 	sn = net_generic(net, smc_net_id);
 	pnettable = &sn->pnettable;
 
-	/* dump netdevices */
+	/* dump pnettable entries */
 	read_lock(&pnettable->lock);
 	list_for_each_entry(pnetelem, &pnettable->pnetlist, list) {
 		if (pnetid && !smc_pnet_match(pnetelem->pnet_name, pnetid))
 			continue;
 		if (idx++ < start_idx)
 			continue;
-		memset(&tmp_entry, 0, sizeof(tmp_entry));
-		memcpy(&tmp_entry.pnet_name, pnetelem->pnet_name,
-		       SMC_MAX_PNETID_LEN);
-		tmp_entry.ndev = pnetelem->ndev;
+		/* if this is not the initial namespace, dump only netdev */
+		if (net != &init_net && pnetelem->type != SMC_PNET_ETH)
+			continue;
 		if (smc_pnet_dumpinfo(skb, portid, seq, NLM_F_MULTI,
-				      &tmp_entry)) {
+				      pnetelem)) {
 			--idx;
 			break;
 		}
 	}
 	read_unlock(&pnettable->lock);
-
-	/* if this is not the initial namespace, stop here */
-	if (net != &init_net)
-		return idx;
-
-	/* dump ib devices */
-	spin_lock(&smc_ib_devices.lock);
-	list_for_each_entry(ibdev, &smc_ib_devices.list, list) {
-		for (ibport = 0; ibport < SMC_MAX_PORTS; ibport++) {
-			if (ibdev->pnetid_by_user[ibport]) {
-				if (pnetid &&
-				    !smc_pnet_match(ibdev->pnetid[ibport],
-						    pnetid))
-					continue;
-				if (idx++ < start_idx)
-					continue;
-				memset(&tmp_entry, 0, sizeof(tmp_entry));
-				memcpy(&tmp_entry.pnet_name,
-				       ibdev->pnetid[ibport],
-				       SMC_MAX_PNETID_LEN);
-				tmp_entry.smcibdev = ibdev;
-				tmp_entry.ib_port = ibport + 1;
-				if (smc_pnet_dumpinfo(skb, portid, seq,
-						      NLM_F_MULTI,
-						      &tmp_entry)) {
-					--idx;
-					break;
-				}
-			}
-		}
-	}
-	spin_unlock(&smc_ib_devices.lock);
-
-	/* dump smcd devices */
-	spin_lock(&smcd_dev_list.lock);
-	list_for_each_entry(smcd_dev, &smcd_dev_list.list, list) {
-		if (smcd_dev->pnetid_by_user) {
-			if (pnetid && !smc_pnet_match(smcd_dev->pnetid, pnetid))
-				continue;
-			if (idx++ < start_idx)
-				continue;
-			memset(&tmp_entry, 0, sizeof(tmp_entry));
-			memcpy(&tmp_entry.pnet_name, smcd_dev->pnetid,
-			       SMC_MAX_PNETID_LEN);
-			tmp_entry.smcd_dev = smcd_dev;
-			if (smc_pnet_dumpinfo(skb, portid, seq, NLM_F_MULTI,
-					      &tmp_entry)) {
-				--idx;
-				break;
-			}
-		}
-	}
-	spin_unlock(&smcd_dev_list.lock);
-
 	return idx;
 }
 
@@ -659,6 +676,9 @@ static int smc_pnet_netdev_event(struct notifier_block *this,
 	case NETDEV_UNREGISTER:
 		smc_pnet_remove_by_ndev(event_dev);
 		return NOTIFY_OK;
+	case NETDEV_REGISTER:
+		smc_pnet_add_by_ndev(event_dev);
+		return NOTIFY_OK;
 	default:
 		return NOTIFY_DONE;
 	}
@@ -744,7 +764,7 @@ static int smc_pnet_find_ndev_pnetid_by_table(struct net_device *ndev,
 
 	read_lock(&pnettable->lock);
 	list_for_each_entry(pnetelem, &pnettable->pnetlist, list) {
-		if (ndev == pnetelem->ndev) {
+		if (pnetelem->type == SMC_PNET_ETH && ndev == pnetelem->ndev) {
 			/* get pnetid of netdev device */
 			memcpy(pnetid, pnetelem->pnet_name, SMC_MAX_PNETID_LEN);
 			rc = 0;
@@ -755,6 +775,34 @@ static int smc_pnet_find_ndev_pnetid_by_table(struct net_device *ndev,
 	return rc;
 }
 
+/* find a roce device for the given pnetid */
+static void _smc_pnet_find_roce_by_pnetid(u8 *pnet_id,
+					  struct smc_init_info *ini)
+{
+	struct smc_ib_device *ibdev;
+	int i;
+
+	ini->ib_dev = NULL;
+	spin_lock(&smc_ib_devices.lock);
+	list_for_each_entry(ibdev, &smc_ib_devices.list, list) {
+		for (i = 1; i <= SMC_MAX_PORTS; i++) {
+			if (!rdma_is_port_valid(ibdev->ibdev, i))
+				continue;
+			if (smc_pnet_match(ibdev->pnetid[i - 1], pnet_id) &&
+			    smc_ib_port_active(ibdev, i) &&
+			    !test_bit(i - 1, ibdev->ports_going_away) &&
+			    !smc_ib_determine_gid(ibdev, i, ini->vlan_id,
+						  ini->ib_gid, NULL)) {
+				ini->ib_dev = ibdev;
+				ini->ib_port = i;
+				goto out;
+			}
+		}
+	}
+out:
+	spin_unlock(&smc_ib_devices.lock);
+}
+
 /* if handshake network device belongs to a roce device, return its
  * IB device and port
  */
@@ -801,8 +849,6 @@ static void smc_pnet_find_roce_by_pnetid(struct net_device *ndev,
 					 struct smc_init_info *ini)
 {
 	u8 ndev_pnetid[SMC_MAX_PNETID_LEN];
-	struct smc_ib_device *ibdev;
-	int i;
 
 	ndev = pnet_find_base_ndev(ndev);
 	if (smc_pnetid_by_dev_port(ndev->dev.parent, ndev->dev_port,
@@ -811,25 +857,7 @@ static void smc_pnet_find_roce_by_pnetid(struct net_device *ndev,
 		smc_pnet_find_rdma_dev(ndev, ini);
 		return; /* pnetid could not be determined */
 	}
-
-	spin_lock(&smc_ib_devices.lock);
-	list_for_each_entry(ibdev, &smc_ib_devices.list, list) {
-		for (i = 1; i <= SMC_MAX_PORTS; i++) {
-			if (!rdma_is_port_valid(ibdev->ibdev, i))
-				continue;
-			if (smc_pnet_match(ibdev->pnetid[i - 1], ndev_pnetid) &&
-			    smc_ib_port_active(ibdev, i) &&
-			    !test_bit(i - 1, ibdev->ports_going_away) &&
-			    !smc_ib_determine_gid(ibdev, i, ini->vlan_id,
-						  ini->ib_gid, NULL)) {
-				ini->ib_dev = ibdev;
-				ini->ib_port = i;
-				goto out;
-			}
-		}
-	}
-out:
-	spin_unlock(&smc_ib_devices.lock);
+	_smc_pnet_find_roce_by_pnetid(ndev_pnetid, ini);
 }
 
 static void smc_pnet_find_ism_by_pnetid(struct net_device *ndev,
@@ -895,3 +923,60 @@ void smc_pnet_find_ism_resource(struct sock *sk, struct smc_init_info *ini)
 out:
 	return;
 }
+
+/* Lookup and apply a pnet table entry to the given ib device.
+ */
+int smc_pnetid_by_table_ib(struct smc_ib_device *smcibdev, u8 ib_port)
+{
+	char *ib_name = smcibdev->ibdev->name;
+	struct smc_pnettable *pnettable;
+	struct smc_pnetentry *tmp_pe;
+	struct smc_net *sn;
+	int rc = -ENOENT;
+
+	/* get pnettable for init namespace */
+	sn = net_generic(&init_net, smc_net_id);
+	pnettable = &sn->pnettable;
+
+	read_lock(&pnettable->lock);
+	list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) {
+		if (tmp_pe->type == SMC_PNET_IB &&
+		    !strncmp(tmp_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX) &&
+		    tmp_pe->ib_port == ib_port) {
+			smc_pnet_apply_ib(smcibdev, ib_port, tmp_pe->pnet_name);
+			rc = 0;
+			break;
+		}
+	}
+	read_unlock(&pnettable->lock);
+
+	return rc;
+}
+
+/* Lookup and apply a pnet table entry to the given smcd device.
+ */
+int smc_pnetid_by_table_smcd(struct smcd_dev *smcddev)
+{
+	const char *ib_name = dev_name(&smcddev->dev);
+	struct smc_pnettable *pnettable;
+	struct smc_pnetentry *tmp_pe;
+	struct smc_net *sn;
+	int rc = -ENOENT;
+
+	/* get pnettable for init namespace */
+	sn = net_generic(&init_net, smc_net_id);
+	pnettable = &sn->pnettable;
+
+	read_lock(&pnettable->lock);
+	list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) {
+		if (tmp_pe->type == SMC_PNET_IB &&
+		    !strncmp(tmp_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX)) {
+			smc_pnet_apply_smcd(smcddev, tmp_pe->pnet_name);
+			rc = 0;
+			break;
+		}
+	}
+	read_unlock(&pnettable->lock);
+
+	return rc;
+}
diff --git a/net/smc/smc_pnet.h b/net/smc/smc_pnet.h
index 4564e4d69c2e..ea207f8fc6f7 100644
--- a/net/smc/smc_pnet.h
+++ b/net/smc/smc_pnet.h
@@ -46,5 +46,7 @@ void smc_pnet_exit(void);
 void smc_pnet_net_exit(struct net *net);
 void smc_pnet_find_roce_resource(struct sock *sk, struct smc_init_info *ini);
 void smc_pnet_find_ism_resource(struct sock *sk, struct smc_init_info *ini);
+int smc_pnetid_by_table_ib(struct smc_ib_device *smcibdev, u8 ib_port);
+int smc_pnetid_by_table_smcd(struct smcd_dev *smcd);
 
 #endif
diff --git a/net/smc/smc_tx.c b/net/smc/smc_tx.c
index 9f1ade86d70e..d74bfe6a90f1 100644
--- a/net/smc/smc_tx.c
+++ b/net/smc/smc_tx.c
@@ -269,19 +269,18 @@ static int smc_tx_rdma_write(struct smc_connection *conn, int peer_rmbe_offset,
 			     int num_sges, struct ib_rdma_wr *rdma_wr)
 {
 	struct smc_link_group *lgr = conn->lgr;
-	struct smc_link *link;
+	struct smc_link *link = conn->lnk;
 	int rc;
 
-	link = &lgr->lnk[SMC_SINGLE_LINK];
 	rdma_wr->wr.wr_id = smc_wr_tx_get_next_wr_id(link);
 	rdma_wr->wr.num_sge = num_sges;
 	rdma_wr->remote_addr =
-		lgr->rtokens[conn->rtoken_idx][SMC_SINGLE_LINK].dma_addr +
+		lgr->rtokens[conn->rtoken_idx][link->link_idx].dma_addr +
 		/* RMBE within RMB */
 		conn->tx_off +
 		/* offset within RMBE */
 		peer_rmbe_offset;
-	rdma_wr->rkey = lgr->rtokens[conn->rtoken_idx][SMC_SINGLE_LINK].rkey;
+	rdma_wr->rkey = lgr->rtokens[conn->rtoken_idx][link->link_idx].rkey;
 	rc = ib_post_send(link->roce_qp, &rdma_wr->wr, NULL);
 	if (rc)
 		smc_lgr_terminate_sched(lgr);
@@ -310,8 +309,10 @@ static int smcr_tx_rdma_writes(struct smc_connection *conn, size_t len,
 			       size_t dst_off, size_t dst_len,
 			       struct smc_rdma_wr *wr_rdma_buf)
 {
+	struct smc_link *link = conn->lnk;
+
 	dma_addr_t dma_addr =
-		sg_dma_address(conn->sndbuf_desc->sgt[SMC_SINGLE_LINK].sgl);
+		sg_dma_address(conn->sndbuf_desc->sgt[link->link_idx].sgl);
 	int src_len_sum = src_len, dst_len_sum = dst_len;
 	int sent_count = src_off;
 	int srcchunk, dstchunk;
@@ -507,7 +508,7 @@ static int smcr_tx_sndbuf_nonempty(struct smc_connection *conn)
 	if (!pflags->urg_data_present) {
 		rc = smc_tx_rdma_writes(conn, wr_rdma_buf);
 		if (rc) {
-			smc_wr_tx_put_slot(&conn->lgr->lnk[SMC_SINGLE_LINK],
+			smc_wr_tx_put_slot(conn->lnk,
 					   (struct smc_wr_tx_pend_priv *)pend);
 			goto out_unlock;
 		}
diff --git a/net/smc/smc_wr.c b/net/smc/smc_wr.c
index 337ee52ad3d3..93223628c002 100644
--- a/net/smc/smc_wr.c
+++ b/net/smc/smc_wr.c
@@ -207,7 +207,7 @@ int smc_wr_tx_get_free_slot(struct smc_link *link,
 	} else {
 		rc = wait_event_interruptible_timeout(
 			link->wr_tx_wait,
-			link->state == SMC_LNK_INACTIVE ||
+			!smc_link_usable(link) ||
 			lgr->terminating ||
 			(smc_wr_tx_get_free_slot_index(link, &idx) != -EBUSY),
 			SMC_WR_TX_WAIT_FREE_SLOT_TIME);
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 325a0858700f..05404bb05607 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -2808,8 +2808,7 @@ int rpc_clnt_test_and_add_xprt(struct rpc_clnt *clnt,
 	task = rpc_call_null_helper(clnt, xprt, NULL,
 			RPC_TASK_SOFT|RPC_TASK_SOFTCONN|RPC_TASK_ASYNC|RPC_TASK_NULLCREDS,
 			&rpc_cb_add_xprt_call_ops, data);
-	if (IS_ERR(task))
-		return PTR_ERR(task);
+
 	rpc_put_task(task);
 success:
 	return 1;
diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c
index d75f17b56f0e..999eee1ed61c 100644
--- a/net/sunrpc/sysctl.c
+++ b/net/sunrpc/sysctl.c
@@ -60,7 +60,7 @@ rpc_unregister_sysctl(void)
 }
 
 static int proc_do_xprt(struct ctl_table *table, int write,
-			void __user *buffer, size_t *lenp, loff_t *ppos)
+			void *buffer, size_t *lenp, loff_t *ppos)
 {
 	char tmpbuf[256];
 	size_t len;
@@ -70,15 +70,15 @@ static int proc_do_xprt(struct ctl_table *table, int write,
 		return 0;
 	}
 	len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
-	return simple_read_from_buffer(buffer, *lenp, ppos, tmpbuf, len);
+	return memory_read_from_buffer(buffer, *lenp, ppos, tmpbuf, len);
 }
 
 static int
-proc_dodebug(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+proc_dodebug(struct ctl_table *table, int write, void *buffer, size_t *lenp,
+	     loff_t *ppos)
 {
-	char		tmpbuf[20], c, *s = NULL;
-	char __user *p;
+	char		tmpbuf[20], *s = NULL;
+	char *p;
 	unsigned int	value;
 	size_t		left, len;
 
@@ -90,18 +90,17 @@ proc_dodebug(struct ctl_table *table, int write,
 	left = *lenp;
 
 	if (write) {
-		if (!access_ok(buffer, left))
-			return -EFAULT;
 		p = buffer;
-		while (left && __get_user(c, p) >= 0 && isspace(c))
-			left--, p++;
+		while (left && isspace(*p)) {
+			left--;
+			p++;
+		}
 		if (!left)
 			goto done;
 
 		if (left > sizeof(tmpbuf) - 1)
 			return -EINVAL;
-		if (copy_from_user(tmpbuf, p, left))
-			return -EFAULT;
+		memcpy(tmpbuf, p, left);
 		tmpbuf[left] = '\0';
 
 		value = simple_strtol(tmpbuf, &s, 0);
@@ -121,11 +120,9 @@ proc_dodebug(struct ctl_table *table, int write,
 		len = sprintf(tmpbuf, "0x%04x", *(unsigned int *) table->data);
 		if (len > left)
 			len = left;
-		if (copy_to_user(buffer, tmpbuf, len))
-			return -EFAULT;
+		memcpy(buffer, tmpbuf, len);
 		if ((left -= len) > 0) {
-			if (put_user('\n', (char __user *)buffer + len))
-				return -EFAULT;
+			*((char *)buffer + len) = '\n';
 			left--;
 		}
 	}
diff --git a/net/sunrpc/xprtrdma/svc_rdma.c b/net/sunrpc/xprtrdma/svc_rdma.c
index 97bca509a391..526da5d4710b 100644
--- a/net/sunrpc/xprtrdma/svc_rdma.c
+++ b/net/sunrpc/xprtrdma/svc_rdma.c
@@ -80,8 +80,7 @@ atomic_t rdma_stat_sq_prod;
  * current value.
  */
 static int read_reset_stat(struct ctl_table *table, int write,
-			   void __user *buffer, size_t *lenp,
-			   loff_t *ppos)
+			   void *buffer, size_t *lenp, loff_t *ppos)
 {
 	atomic_t *stat = (atomic_t *)table->data;
 
@@ -103,8 +102,8 @@ static int read_reset_stat(struct ctl_table *table, int write,
 		len -= *ppos;
 		if (len > *lenp)
 			len = *lenp;
-		if (len && copy_to_user(buffer, str_buf, len))
-			return -EFAULT;
+		if (len)
+			memcpy(buffer, str_buf, len);
 		*lenp = len;
 		*ppos += len;
 	}
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c
index c98e602a1a2d..e23f94a5549b 100644
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -800,6 +800,8 @@ static int bpf_exec_tx_verdict(struct sk_msg *msg, struct sock *sk,
 			*copied -= sk_msg_free(sk, msg);
 			tls_free_open_rec(sk);
 		}
+		if (psock)
+			sk_psock_put(sk, psock);
 		return err;
 	}
 more_data:
@@ -2081,8 +2083,9 @@ static void tls_data_ready(struct sock *sk)
 	strp_data_ready(&ctx->strp);
 
 	psock = sk_psock_get(sk);
-	if (psock && !list_empty(&psock->ingress_msg)) {
-		ctx->saved_data_ready(sk);
+	if (psock) {
+		if (!list_empty(&psock->ingress_msg))
+			ctx->saved_data_ready(sk);
 		sk_psock_put(sk, psock);
 	}
 }
diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c
index 709038a4783e..69efc891885f 100644
--- a/net/vmw_vsock/virtio_transport_common.c
+++ b/net/vmw_vsock/virtio_transport_common.c
@@ -157,7 +157,11 @@ static struct sk_buff *virtio_transport_build_skb(void *opaque)
 
 void virtio_transport_deliver_tap_pkt(struct virtio_vsock_pkt *pkt)
 {
+	if (pkt->tap_delivered)
+		return;
+
 	vsock_deliver_tap(virtio_transport_build_skb, pkt);
+	pkt->tap_delivered = true;
 }
 EXPORT_SYMBOL_GPL(virtio_transport_deliver_tap_pkt);
 
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index fcac5c6366e1..e111c08daa0e 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -27,6 +27,7 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
 		return;
 
 	chandef->chan = chan;
+	chandef->freq1_offset = chan->freq_offset;
 	chandef->center_freq2 = 0;
 	chandef->edmg.bw_config = 0;
 	chandef->edmg.channels = 0;
@@ -146,6 +147,9 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 	if (!chandef->chan)
 		return false;
 
+	if (chandef->freq1_offset >= 1000)
+		return false;
+
 	control_freq = chandef->chan->center_freq;
 
 	switch (chandef->width) {
@@ -153,7 +157,8 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 	case NL80211_CHAN_WIDTH_10:
 	case NL80211_CHAN_WIDTH_20:
 	case NL80211_CHAN_WIDTH_20_NOHT:
-		if (chandef->center_freq1 != control_freq)
+		if (ieee80211_chandef_to_khz(chandef) !=
+		    ieee80211_channel_to_khz(chandef->chan))
 			return false;
 		if (chandef->center_freq2)
 			return false;
@@ -386,10 +391,11 @@ static u32 cfg80211_get_start_freq(u32 center_freq,
 {
 	u32 start_freq;
 
-	if (bandwidth <= 20)
+	bandwidth = MHZ_TO_KHZ(bandwidth);
+	if (bandwidth <= MHZ_TO_KHZ(20))
 		start_freq = center_freq;
 	else
-		start_freq = center_freq - bandwidth/2 + 10;
+		start_freq = center_freq - bandwidth / 2 + MHZ_TO_KHZ(10);
 
 	return start_freq;
 }
@@ -399,10 +405,11 @@ static u32 cfg80211_get_end_freq(u32 center_freq,
 {
 	u32 end_freq;
 
-	if (bandwidth <= 20)
+	bandwidth = MHZ_TO_KHZ(bandwidth);
+	if (bandwidth <= MHZ_TO_KHZ(20))
 		end_freq = center_freq;
 	else
-		end_freq = center_freq + bandwidth/2 - 10;
+		end_freq = center_freq + bandwidth / 2 - MHZ_TO_KHZ(10);
 
 	return end_freq;
 }
@@ -417,8 +424,8 @@ static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy,
 	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
 	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
 
-	for (freq = start_freq; freq <= end_freq; freq += 20) {
-		c = ieee80211_get_channel(wiphy, freq);
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
 		if (!c)
 			return -EINVAL;
 
@@ -449,8 +456,8 @@ int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
 			return -EINVAL;
 
 		ret = cfg80211_get_chans_dfs_required(wiphy,
-						      chandef->center_freq1,
-						      width);
+					ieee80211_chandef_to_khz(chandef),
+					width);
 		if (ret < 0)
 			return ret;
 		else if (ret > 0)
@@ -460,8 +467,8 @@ int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
 			return 0;
 
 		ret = cfg80211_get_chans_dfs_required(wiphy,
-						      chandef->center_freq2,
-						      width);
+					MHZ_TO_KHZ(chandef->center_freq2),
+					width);
 		if (ret < 0)
 			return ret;
 		else if (ret > 0)
@@ -503,8 +510,8 @@ static int cfg80211_get_chans_dfs_usable(struct wiphy *wiphy,
 	 * DFS_AVAILABLE). Return number of usable channels
 	 * (require CAC). Allow DFS and non-DFS channel mix.
 	 */
-	for (freq = start_freq; freq <= end_freq; freq += 20) {
-		c = ieee80211_get_channel(wiphy, freq);
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
 		if (!c)
 			return -EINVAL;
 
@@ -536,8 +543,9 @@ bool cfg80211_chandef_dfs_usable(struct wiphy *wiphy,
 	if (width < 0)
 		return false;
 
-	r1 = cfg80211_get_chans_dfs_usable(wiphy, chandef->center_freq1,
-					  width);
+	r1 = cfg80211_get_chans_dfs_usable(wiphy,
+					   MHZ_TO_KHZ(chandef->center_freq1),
+					   width);
 
 	if (r1 < 0)
 		return false;
@@ -546,8 +554,8 @@ bool cfg80211_chandef_dfs_usable(struct wiphy *wiphy,
 	case NL80211_CHAN_WIDTH_80P80:
 		WARN_ON(!chandef->center_freq2);
 		r2 = cfg80211_get_chans_dfs_usable(wiphy,
-						   chandef->center_freq2,
-						   width);
+					MHZ_TO_KHZ(chandef->center_freq2),
+					width);
 		if (r2 < 0)
 			return false;
 		break;
@@ -694,8 +702,8 @@ static bool cfg80211_get_chans_dfs_available(struct wiphy *wiphy,
 	 * If any channel in between is disabled or has not
 	 * had gone through CAC return false
 	 */
-	for (freq = start_freq; freq <= end_freq; freq += 20) {
-		c = ieee80211_get_channel(wiphy, freq);
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
 		if (!c)
 			return false;
 
@@ -724,7 +732,8 @@ static bool cfg80211_chandef_dfs_available(struct wiphy *wiphy,
 	if (width < 0)
 		return false;
 
-	r = cfg80211_get_chans_dfs_available(wiphy, chandef->center_freq1,
+	r = cfg80211_get_chans_dfs_available(wiphy,
+					     MHZ_TO_KHZ(chandef->center_freq1),
 					     width);
 
 	/* If any of channels unavailable for cf1 just return */
@@ -735,8 +744,8 @@ static bool cfg80211_chandef_dfs_available(struct wiphy *wiphy,
 	case NL80211_CHAN_WIDTH_80P80:
 		WARN_ON(!chandef->center_freq2);
 		r = cfg80211_get_chans_dfs_available(wiphy,
-						     chandef->center_freq2,
-						     width);
+					MHZ_TO_KHZ(chandef->center_freq2),
+					width);
 		break;
 	default:
 		WARN_ON(chandef->center_freq2);
@@ -757,8 +766,8 @@ static unsigned int cfg80211_get_chans_dfs_cac_time(struct wiphy *wiphy,
 	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
 	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
 
-	for (freq = start_freq; freq <= end_freq; freq += 20) {
-		c = ieee80211_get_channel(wiphy, freq);
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
 		if (!c)
 			return 0;
 
@@ -790,14 +799,14 @@ cfg80211_chandef_dfs_cac_time(struct wiphy *wiphy,
 		return 0;
 
 	t1 = cfg80211_get_chans_dfs_cac_time(wiphy,
-					     chandef->center_freq1,
+					     MHZ_TO_KHZ(chandef->center_freq1),
 					     width);
 
 	if (!chandef->center_freq2)
 		return t1;
 
 	t2 = cfg80211_get_chans_dfs_cac_time(wiphy,
-					     chandef->center_freq2,
+					     MHZ_TO_KHZ(chandef->center_freq2),
 					     width);
 
 	return max(t1, t2);
@@ -813,8 +822,8 @@ static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy,
 	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
 	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
 
-	for (freq = start_freq; freq <= end_freq; freq += 20) {
-		c = ieee80211_get_channel(wiphy, freq);
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
 		if (!c || c->flags & prohibited_flags)
 			return false;
 	}
@@ -976,13 +985,15 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
 		prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
 
 
-	if (!cfg80211_secondary_chans_ok(wiphy, chandef->center_freq1,
+	if (!cfg80211_secondary_chans_ok(wiphy,
+					 ieee80211_chandef_to_khz(chandef),
 					 width, prohibited_flags))
 		return false;
 
 	if (!chandef->center_freq2)
 		return true;
-	return cfg80211_secondary_chans_ok(wiphy, chandef->center_freq2,
+	return cfg80211_secondary_chans_ok(wiphy,
+					   MHZ_TO_KHZ(chandef->center_freq2),
 					   width, prohibited_flags);
 }
 EXPORT_SYMBOL(cfg80211_chandef_usable);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 341402b4f178..b795f363d004 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -480,9 +480,6 @@ struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv,
 	INIT_LIST_HEAD(&rdev->bss_list);
 	INIT_LIST_HEAD(&rdev->sched_scan_req_list);
 	INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
-	INIT_LIST_HEAD(&rdev->mlme_unreg);
-	spin_lock_init(&rdev->mlme_unreg_lock);
-	INIT_WORK(&rdev->mlme_unreg_wk, cfg80211_mlme_unreg_wk);
 	INIT_DELAYED_WORK(&rdev->dfs_update_channels_wk,
 			  cfg80211_dfs_channels_update_work);
 #ifdef CONFIG_CFG80211_WEXT
@@ -837,6 +834,9 @@ int wiphy_register(struct wiphy *wiphy)
 			sband->channels[i].orig_mpwr =
 				sband->channels[i].max_power;
 			sband->channels[i].band = band;
+
+			if (WARN_ON(sband->channels[i].freq_offset >= 1000))
+				return -EINVAL;
 		}
 
 		for (i = 0; i < sband->n_iftype_data; i++) {
@@ -1030,7 +1030,6 @@ void wiphy_unregister(struct wiphy *wiphy)
 	cancel_delayed_work_sync(&rdev->dfs_update_channels_wk);
 	flush_work(&rdev->destroy_work);
 	flush_work(&rdev->sched_scan_stop_wk);
-	flush_work(&rdev->mlme_unreg_wk);
 	flush_work(&rdev->propagate_radar_detect_wk);
 	flush_work(&rdev->propagate_cac_done_wk);
 
@@ -1094,6 +1093,7 @@ static void __cfg80211_unregister_wdev(struct wireless_dev *wdev, bool sync)
 	rdev->devlist_generation++;
 
 	cfg80211_mlme_purge_registrations(wdev);
+	flush_work(&wdev->mgmt_registrations_update_wk);
 
 	switch (wdev->iftype) {
 	case NL80211_IFTYPE_P2P_DEVICE:
@@ -1238,6 +1238,8 @@ void cfg80211_init_wdev(struct cfg80211_registered_device *rdev,
 	spin_lock_init(&wdev->event_lock);
 	INIT_LIST_HEAD(&wdev->mgmt_registrations);
 	spin_lock_init(&wdev->mgmt_registrations_lock);
+	INIT_WORK(&wdev->mgmt_registrations_update_wk,
+		  cfg80211_mgmt_registrations_update_wk);
 	INIT_LIST_HEAD(&wdev->pmsr_list);
 	spin_lock_init(&wdev->pmsr_lock);
 	INIT_WORK(&wdev->pmsr_free_wk, cfg80211_pmsr_free_wk);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index bb897a803ffe..e0e5b3ee9699 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -60,10 +60,6 @@ struct cfg80211_registered_device {
 	struct list_head beacon_registrations;
 	spinlock_t beacon_registrations_lock;
 
-	struct list_head mlme_unreg;
-	spinlock_t mlme_unreg_lock;
-	struct work_struct mlme_unreg_wk;
-
 	/* protected by RTNL only */
 	int num_running_ifaces;
 	int num_running_monitor_ifaces;
@@ -290,7 +286,7 @@ struct cfg80211_cqm_config {
 	u32 rssi_hyst;
 	s32 last_rssi_event_value;
 	int n_rssi_thresholds;
-	s32 rssi_thresholds[0];
+	s32 rssi_thresholds[];
 };
 
 void cfg80211_destroy_ifaces(struct cfg80211_registered_device *rdev);
@@ -385,8 +381,9 @@ void cfg80211_mlme_down(struct cfg80211_registered_device *rdev,
 			struct net_device *dev);
 int cfg80211_mlme_register_mgmt(struct wireless_dev *wdev, u32 snd_pid,
 				u16 frame_type, const u8 *match_data,
-				int match_len, struct netlink_ext_ack *extack);
-void cfg80211_mlme_unreg_wk(struct work_struct *wk);
+				int match_len, bool multicast_rx,
+				struct netlink_ext_ack *extack);
+void cfg80211_mgmt_registrations_update_wk(struct work_struct *wk);
 void cfg80211_mlme_unregister_socket(struct wireless_dev *wdev, u32 nlpid);
 void cfg80211_mlme_purge_registrations(struct wireless_dev *wdev);
 int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index e4805a3bd310..409497a3527d 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -426,58 +426,62 @@ struct cfg80211_mgmt_registration {
 
 	__le16 frame_type;
 
+	bool multicast_rx;
+
 	u8 match[];
 };
 
-static void
-cfg80211_process_mlme_unregistrations(struct cfg80211_registered_device *rdev)
+static void cfg80211_mgmt_registrations_update(struct wireless_dev *wdev)
 {
+	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
+	struct wireless_dev *tmp;
 	struct cfg80211_mgmt_registration *reg;
+	struct mgmt_frame_regs upd = {};
 
 	ASSERT_RTNL();
 
-	spin_lock_bh(&rdev->mlme_unreg_lock);
-	while ((reg = list_first_entry_or_null(&rdev->mlme_unreg,
-					       struct cfg80211_mgmt_registration,
-					       list))) {
-		list_del(&reg->list);
-		spin_unlock_bh(&rdev->mlme_unreg_lock);
+	rcu_read_lock();
+	list_for_each_entry_rcu(tmp, &rdev->wiphy.wdev_list, list) {
+		list_for_each_entry_rcu(reg, &tmp->mgmt_registrations, list) {
+			u32 mask = BIT(le16_to_cpu(reg->frame_type) >> 4);
+			u32 mcast_mask = 0;
 
-		if (rdev->ops->mgmt_frame_register) {
-			u16 frame_type = le16_to_cpu(reg->frame_type);
+			if (reg->multicast_rx)
+				mcast_mask = mask;
 
-			rdev_mgmt_frame_register(rdev, reg->wdev,
-						 frame_type, false);
-		}
+			upd.global_stypes |= mask;
+			upd.global_mcast_stypes |= mcast_mask;
 
-		kfree(reg);
-
-		spin_lock_bh(&rdev->mlme_unreg_lock);
+			if (tmp == wdev) {
+				upd.interface_stypes |= mask;
+				upd.interface_mcast_stypes |= mcast_mask;
+			}
+		}
 	}
-	spin_unlock_bh(&rdev->mlme_unreg_lock);
+	rcu_read_unlock();
+
+	rdev_update_mgmt_frame_registrations(rdev, wdev, &upd);
 }
 
-void cfg80211_mlme_unreg_wk(struct work_struct *wk)
+void cfg80211_mgmt_registrations_update_wk(struct work_struct *wk)
 {
-	struct cfg80211_registered_device *rdev;
-
-	rdev = container_of(wk, struct cfg80211_registered_device,
-			    mlme_unreg_wk);
+	struct wireless_dev *wdev = container_of(wk, struct wireless_dev,
+						 mgmt_registrations_update_wk);
 
 	rtnl_lock();
-	cfg80211_process_mlme_unregistrations(rdev);
+	cfg80211_mgmt_registrations_update(wdev);
 	rtnl_unlock();
 }
 
 int cfg80211_mlme_register_mgmt(struct wireless_dev *wdev, u32 snd_portid,
 				u16 frame_type, const u8 *match_data,
-				int match_len, struct netlink_ext_ack *extack)
+				int match_len, bool multicast_rx,
+				struct netlink_ext_ack *extack)
 {
-	struct wiphy *wiphy = wdev->wiphy;
-	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
 	struct cfg80211_mgmt_registration *reg, *nreg;
 	int err = 0;
 	u16 mgmt_type;
+	bool update_multicast = false;
 
 	if (!wdev->wiphy->mgmt_stypes)
 		return -EOPNOTSUPP;
@@ -528,34 +532,39 @@ int cfg80211_mlme_register_mgmt(struct wireless_dev *wdev, u32 snd_portid,
 			continue;
 
 		if (memcmp(reg->match, match_data, mlen) == 0) {
+			if (reg->multicast_rx != multicast_rx) {
+				update_multicast = true;
+				reg->multicast_rx = multicast_rx;
+				break;
+			}
 			NL_SET_ERR_MSG(extack, "Match already configured");
 			err = -EALREADY;
 			break;
 		}
 	}
 
-	if (err) {
-		kfree(nreg);
+	if (err)
 		goto out;
-	}
 
-	memcpy(nreg->match, match_data, match_len);
-	nreg->match_len = match_len;
-	nreg->nlportid = snd_portid;
-	nreg->frame_type = cpu_to_le16(frame_type);
-	nreg->wdev = wdev;
-	list_add(&nreg->list, &wdev->mgmt_registrations);
+	if (update_multicast) {
+		kfree(nreg);
+	} else {
+		memcpy(nreg->match, match_data, match_len);
+		nreg->match_len = match_len;
+		nreg->nlportid = snd_portid;
+		nreg->frame_type = cpu_to_le16(frame_type);
+		nreg->wdev = wdev;
+		nreg->multicast_rx = multicast_rx;
+		list_add(&nreg->list, &wdev->mgmt_registrations);
+	}
 	spin_unlock_bh(&wdev->mgmt_registrations_lock);
 
-	/* process all unregistrations to avoid driver confusion */
-	cfg80211_process_mlme_unregistrations(rdev);
-
-	if (rdev->ops->mgmt_frame_register)
-		rdev_mgmt_frame_register(rdev, wdev, frame_type, true);
+	cfg80211_mgmt_registrations_update(wdev);
 
 	return 0;
 
  out:
+	kfree(nreg);
 	spin_unlock_bh(&wdev->mgmt_registrations_lock);
 
 	return err;
@@ -574,11 +583,9 @@ void cfg80211_mlme_unregister_socket(struct wireless_dev *wdev, u32 nlportid)
 			continue;
 
 		list_del(&reg->list);
-		spin_lock(&rdev->mlme_unreg_lock);
-		list_add_tail(&reg->list, &rdev->mlme_unreg);
-		spin_unlock(&rdev->mlme_unreg_lock);
+		kfree(reg);
 
-		schedule_work(&rdev->mlme_unreg_wk);
+		schedule_work(&wdev->mgmt_registrations_update_wk);
 	}
 
 	spin_unlock_bh(&wdev->mgmt_registrations_lock);
@@ -594,15 +601,16 @@ void cfg80211_mlme_unregister_socket(struct wireless_dev *wdev, u32 nlportid)
 
 void cfg80211_mlme_purge_registrations(struct wireless_dev *wdev)
 {
-	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
+	struct cfg80211_mgmt_registration *reg, *tmp;
 
 	spin_lock_bh(&wdev->mgmt_registrations_lock);
-	spin_lock(&rdev->mlme_unreg_lock);
-	list_splice_tail_init(&wdev->mgmt_registrations, &rdev->mlme_unreg);
-	spin_unlock(&rdev->mlme_unreg_lock);
+	list_for_each_entry_safe(reg, tmp, &wdev->mgmt_registrations, list) {
+		list_del(&reg->list);
+		kfree(reg);
+	}
 	spin_unlock_bh(&wdev->mgmt_registrations_lock);
 
-	cfg80211_process_mlme_unregistrations(rdev);
+	cfg80211_mgmt_registrations_update(wdev);
 }
 
 int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 692bcd35f809..3d27b24c68b2 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -661,6 +661,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_CONTROL_PORT_NO_PREAUTH] = { .type = NLA_FLAG },
 	[NL80211_ATTR_PMK_LIFETIME] = NLA_POLICY_MIN(NLA_U32, 1),
 	[NL80211_ATTR_PMK_REAUTH_THRESHOLD] = NLA_POLICY_RANGE(NLA_U8, 1, 100),
+	[NL80211_ATTR_RECEIVE_MULTICAST] = { .type = NLA_FLAG },
 };
 
 /* policy for the key attributes */
@@ -3904,14 +3905,25 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 	};
 	void *hdr;
 	struct sk_buff *msg;
+	bool bigtk_support = false;
+
+	if (wiphy_ext_feature_isset(&rdev->wiphy,
+				    NL80211_EXT_FEATURE_BEACON_PROTECTION))
+		bigtk_support = true;
+
+	if ((dev->ieee80211_ptr->iftype == NL80211_IFTYPE_STATION ||
+	     dev->ieee80211_ptr->iftype == NL80211_IFTYPE_P2P_CLIENT) &&
+	    wiphy_ext_feature_isset(&rdev->wiphy,
+				    NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT))
+		bigtk_support = true;
 
 	if (info->attrs[NL80211_ATTR_KEY_IDX]) {
 		key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
-		if (key_idx > 5 &&
-		    !wiphy_ext_feature_isset(
-			    &rdev->wiphy,
-			    NL80211_EXT_FEATURE_BEACON_PROTECTION))
+
+		if (key_idx >= 6 && key_idx <= 7 && !bigtk_support) {
+			GENL_SET_ERR_MSG(info, "BIGTK not supported");
 			return -EINVAL;
+		}
 	}
 
 	if (info->attrs[NL80211_ATTR_MAC])
@@ -4726,6 +4738,8 @@ static void nl80211_check_ap_rate_selectors(struct cfg80211_ap_settings *params,
 			params->ht_required = true;
 		if (rates[2 + i] == BSS_MEMBERSHIP_SELECTOR_VHT_PHY)
 			params->vht_required = true;
+		if (rates[2 + i] == BSS_MEMBERSHIP_SELECTOR_HE_PHY)
+			params->he_required = true;
 	}
 }
 
@@ -10773,9 +10787,18 @@ static int nl80211_register_mgmt(struct sk_buff *skb, struct genl_info *info)
 	if (!rdev->ops->mgmt_tx)
 		return -EOPNOTSUPP;
 
+	if (info->attrs[NL80211_ATTR_RECEIVE_MULTICAST] &&
+	    !wiphy_ext_feature_isset(&rdev->wiphy,
+				     NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS)) {
+		GENL_SET_ERR_MSG(info,
+				 "multicast RX registrations are not supported");
+		return -EOPNOTSUPP;
+	}
+
 	return cfg80211_mlme_register_mgmt(wdev, info->snd_portid, frame_type,
 					   nla_data(info->attrs[NL80211_ATTR_FRAME_MATCH]),
 					   nla_len(info->attrs[NL80211_ATTR_FRAME_MATCH]),
+					   info->attrs[NL80211_ATTR_RECEIVE_MULTICAST],
 					   info->extack);
 }
 
@@ -15542,10 +15565,19 @@ void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev, const u8 *buf,
 	if (WARN_ON(len < 2))
 		return;
 
-	if (ieee80211_is_deauth(mgmt->frame_control))
+	if (ieee80211_is_deauth(mgmt->frame_control)) {
 		cmd = NL80211_CMD_UNPROT_DEAUTHENTICATE;
-	else
+	} else if (ieee80211_is_disassoc(mgmt->frame_control)) {
 		cmd = NL80211_CMD_UNPROT_DISASSOCIATE;
+	} else if (ieee80211_is_beacon(mgmt->frame_control)) {
+		if (wdev->unprot_beacon_reported &&
+		    elapsed_jiffies_msecs(wdev->unprot_beacon_reported) < 10000)
+			return;
+		cmd = NL80211_CMD_UNPROT_BEACON;
+		wdev->unprot_beacon_reported = jiffies;
+	} else {
+		return;
+	}
 
 	trace_cfg80211_rx_unprot_mlme_mgmt(dev, buf, len);
 	nl80211_send_mlme_event(rdev, dev, buf, len, cmd, GFP_ATOMIC, -1,
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 99462f0c4e08..df5142e86c4f 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -819,13 +819,16 @@ rdev_set_cqm_txe_config(struct cfg80211_registered_device *rdev,
 }
 
 static inline void
-rdev_mgmt_frame_register(struct cfg80211_registered_device *rdev,
-			 struct wireless_dev *wdev, u16 frame_type, bool reg)
+rdev_update_mgmt_frame_registrations(struct cfg80211_registered_device *rdev,
+				     struct wireless_dev *wdev,
+				     struct mgmt_frame_regs *upd)
 {
 	might_sleep();
 
-	trace_rdev_mgmt_frame_register(&rdev->wiphy, wdev , frame_type, reg);
-	rdev->ops->mgmt_frame_register(&rdev->wiphy, wdev , frame_type, reg);
+	trace_rdev_update_mgmt_frame_registrations(&rdev->wiphy, wdev, upd);
+	if (rdev->ops->update_mgmt_frame_registrations)
+		rdev->ops->update_mgmt_frame_registrations(&rdev->wiphy, wdev,
+							   upd);
 	trace_rdev_return_void(&rdev->wiphy);
 }
 
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index d476d4da0d09..0d74a31ef0ab 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1658,22 +1658,23 @@ static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd
 					  const struct ieee80211_channel *chan)
 {
 	const struct ieee80211_freq_range *freq_range = NULL;
-	u32 max_bandwidth_khz, bw_flags = 0;
+	u32 max_bandwidth_khz, center_freq_khz, bw_flags = 0;
 
 	freq_range = &reg_rule->freq_range;
 
 	max_bandwidth_khz = freq_range->max_bandwidth_khz;
+	center_freq_khz = ieee80211_channel_to_khz(chan);
 	/* Check if auto calculation requested */
 	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
 		max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
 	/* If we get a reg_rule we can assume that at least 5Mhz fit */
 	if (!cfg80211_does_bw_fit_range(freq_range,
-					MHZ_TO_KHZ(chan->center_freq),
+					center_freq_khz,
 					MHZ_TO_KHZ(10)))
 		bw_flags |= IEEE80211_CHAN_NO_10MHZ;
 	if (!cfg80211_does_bw_fit_range(freq_range,
-					MHZ_TO_KHZ(chan->center_freq),
+					center_freq_khz,
 					MHZ_TO_KHZ(20)))
 		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 
@@ -1710,7 +1711,7 @@ static void handle_channel(struct wiphy *wiphy,
 
 	flags = chan->orig_flags;
 
-	reg_rule = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq));
+	reg_rule = freq_reg_info(wiphy, ieee80211_channel_to_khz(chan));
 	if (IS_ERR(reg_rule)) {
 		/*
 		 * We will disable all channels that do not match our
@@ -1729,13 +1730,13 @@ static void handle_channel(struct wiphy *wiphy,
 		if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
 		    request_wiphy && request_wiphy == wiphy &&
 		    request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
-			pr_debug("Disabling freq %d MHz for good\n",
-				 chan->center_freq);
+			pr_debug("Disabling freq %d.%03d MHz for good\n",
+				 chan->center_freq, chan->freq_offset);
 			chan->orig_flags |= IEEE80211_CHAN_DISABLED;
 			chan->flags = chan->orig_flags;
 		} else {
-			pr_debug("Disabling freq %d MHz\n",
-				 chan->center_freq);
+			pr_debug("Disabling freq %d.%03d MHz\n",
+				 chan->center_freq, chan->freq_offset);
 			chan->flags |= IEEE80211_CHAN_DISABLED;
 		}
 		return;
@@ -1936,7 +1937,7 @@ static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx,
 	sband = wiphy->bands[reg_beacon->chan.band];
 	chan = &sband->channels[chan_idx];
 
-	if (likely(chan->center_freq != reg_beacon->chan.center_freq))
+	if (likely(!ieee80211_channel_equal(chan, &reg_beacon->chan)))
 		return;
 
 	if (chan->beacon_found)
@@ -2269,18 +2270,18 @@ static void handle_channel_custom(struct wiphy *wiphy,
 	u32 bw_flags = 0;
 	const struct ieee80211_reg_rule *reg_rule = NULL;
 	const struct ieee80211_power_rule *power_rule = NULL;
-	u32 bw;
+	u32 bw, center_freq_khz;
 
+	center_freq_khz = ieee80211_channel_to_khz(chan);
 	for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
-		reg_rule = freq_reg_info_regd(MHZ_TO_KHZ(chan->center_freq),
-					      regd, bw);
+		reg_rule = freq_reg_info_regd(center_freq_khz, regd, bw);
 		if (!IS_ERR(reg_rule))
 			break;
 	}
 
 	if (IS_ERR_OR_NULL(reg_rule)) {
-		pr_debug("Disabling freq %d MHz as custom regd has no rule that fits it\n",
-			 chan->center_freq);
+		pr_debug("Disabling freq %d.%03d MHz as custom regd has no rule that fits it\n",
+			 chan->center_freq, chan->freq_offset);
 		if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) {
 			chan->flags |= IEEE80211_CHAN_DISABLED;
 		} else {
@@ -3337,8 +3338,8 @@ static bool pending_reg_beacon(struct ieee80211_channel *beacon_chan)
 	struct reg_beacon *pending_beacon;
 
 	list_for_each_entry(pending_beacon, &reg_pending_beacons, list)
-		if (beacon_chan->center_freq ==
-		    pending_beacon->chan.center_freq)
+		if (ieee80211_channel_equal(beacon_chan,
+					    &pending_beacon->chan))
 			return true;
 	return false;
 }
@@ -3367,9 +3368,10 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy,
 	if (!reg_beacon)
 		return -ENOMEM;
 
-	pr_debug("Found new beacon on frequency: %d MHz (Ch %d) on %s\n",
-		 beacon_chan->center_freq,
-		 ieee80211_frequency_to_channel(beacon_chan->center_freq),
+	pr_debug("Found new beacon on frequency: %d.%03d MHz (Ch %d) on %s\n",
+		 beacon_chan->center_freq, beacon_chan->freq_offset,
+		 ieee80211_freq_khz_to_channel(
+			 ieee80211_channel_to_khz(beacon_chan)),
 		 wiphy_name(wiphy));
 
 	memcpy(&reg_beacon->chan, beacon_chan,
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 4000382aef48..74ea4cfb39fb 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1322,8 +1322,8 @@ cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen,
 		return channel;
 	}
 
-	freq = ieee80211_channel_to_frequency(channel_number, channel->band);
-	alt_channel = ieee80211_get_channel(wiphy, freq);
+	freq = ieee80211_channel_to_freq_khz(channel_number, channel->band);
+	alt_channel = ieee80211_get_channel_khz(wiphy, freq);
 	if (!alt_channel) {
 		if (channel->band == NL80211_BAND_2GHZ) {
 			/*
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index ac3e60aa1fc8..3554c0d951f4 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -694,6 +694,7 @@ void __cfg80211_connect_result(struct net_device *dev,
 		return;
 	}
 
+	wdev->unprot_beacon_reported = 0;
 	nl80211_send_connect_result(wiphy_to_rdev(wdev->wiphy), dev, cr,
 				    GFP_KERNEL);
 
@@ -921,6 +922,7 @@ void __cfg80211_roamed(struct wireless_dev *wdev,
 	cfg80211_hold_bss(bss_from_pub(info->bss));
 	wdev->current_bss = bss_from_pub(info->bss);
 
+	wdev->unprot_beacon_reported = 0;
 	nl80211_send_roamed(wiphy_to_rdev(wdev->wiphy),
 			    wdev->netdev, info, GFP_KERNEL);
 
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 839df54cee21..53c887ea67c7 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -112,24 +112,29 @@
 	} while (0)
 
 #define CHAN_ENTRY __field(enum nl80211_band, band) \
-		   __field(u32, center_freq)
+		   __field(u32, center_freq)		\
+		   __field(u16, freq_offset)
 #define CHAN_ASSIGN(chan)					  \
 	do {							  \
 		if (chan) {					  \
 			__entry->band = chan->band;		  \
 			__entry->center_freq = chan->center_freq; \
+			__entry->freq_offset = chan->freq_offset; \
 		} else {					  \
 			__entry->band = 0;			  \
 			__entry->center_freq = 0;		  \
+			__entry->freq_offset = 0;		  \
 		}						  \
 	} while (0)
-#define CHAN_PR_FMT "band: %d, freq: %u"
-#define CHAN_PR_ARG __entry->band, __entry->center_freq
+#define CHAN_PR_FMT "band: %d, freq: %u.%03u"
+#define CHAN_PR_ARG __entry->band, __entry->center_freq, __entry->freq_offset
 
 #define CHAN_DEF_ENTRY __field(enum nl80211_band, band)		\
 		       __field(u32, control_freq)			\
+		       __field(u32, freq_offset)			\
 		       __field(u32, width)				\
 		       __field(u32, center_freq1)			\
+		       __field(u32, freq1_offset)			\
 		       __field(u32, center_freq2)
 #define CHAN_DEF_ASSIGN(chandef)					\
 	do {								\
@@ -137,21 +142,27 @@
 			__entry->band = (chandef)->chan->band;		\
 			__entry->control_freq =				\
 				(chandef)->chan->center_freq;		\
+			__entry->freq_offset =				\
+				(chandef)->chan->freq_offset;		\
 			__entry->width = (chandef)->width;		\
 			__entry->center_freq1 = (chandef)->center_freq1;\
+			__entry->freq1_offset = (chandef)->freq1_offset;\
 			__entry->center_freq2 = (chandef)->center_freq2;\
 		} else {						\
 			__entry->band = 0;				\
 			__entry->control_freq = 0;			\
+			__entry->freq_offset = 0;			\
 			__entry->width = 0;				\
 			__entry->center_freq1 = 0;			\
+			__entry->freq1_offset = 0;			\
 			__entry->center_freq2 = 0;			\
 		}							\
 	} while (0)
 #define CHAN_DEF_PR_FMT							\
-	"band: %d, control freq: %u, width: %d, cf1: %u, cf2: %u"
+	"band: %d, control freq: %u.%03u, width: %d, cf1: %u.%03u, cf2: %u"
 #define CHAN_DEF_PR_ARG __entry->band, __entry->control_freq,		\
-			__entry->width, __entry->center_freq1,		\
+			__entry->freq_offset, __entry->width,		\
+			__entry->center_freq1, __entry->freq1_offset,	\
 			__entry->center_freq2
 
 #define SINFO_ENTRY __field(int, generation)	    \
@@ -1582,25 +1593,25 @@ TRACE_EVENT(rdev_set_bitrate_mask,
 		  WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer))
 );
 
-TRACE_EVENT(rdev_mgmt_frame_register,
+TRACE_EVENT(rdev_update_mgmt_frame_registrations,
 	TP_PROTO(struct wiphy *wiphy, struct wireless_dev *wdev,
-		 u16 frame_type, bool reg),
-	TP_ARGS(wiphy, wdev, frame_type, reg),
+		 struct mgmt_frame_regs *upd),
+	TP_ARGS(wiphy, wdev, upd),
 	TP_STRUCT__entry(
 		WIPHY_ENTRY
 		WDEV_ENTRY
-		__field(u16, frame_type)
-		__field(bool, reg)
+		__field(u16, global_stypes)
+		__field(u16, interface_stypes)
 	),
 	TP_fast_assign(
 		WIPHY_ASSIGN;
 		WDEV_ASSIGN;
-		__entry->frame_type = frame_type;
-		__entry->reg = reg;
+		__entry->global_stypes = upd->global_stypes;
+		__entry->interface_stypes = upd->interface_stypes;
 	),
-	TP_printk(WIPHY_PR_FMT ", " WDEV_PR_FMT ", frame_type: 0x%.2x, reg: %s ",
-		  WIPHY_PR_ARG, WDEV_PR_ARG, __entry->frame_type,
-		  __entry->reg ? "true" : "false")
+	TP_printk(WIPHY_PR_FMT ", " WDEV_PR_FMT ", global: 0x%.2x, intf: 0x%.2x",
+		  WIPHY_PR_ARG, WDEV_PR_ARG,
+		  __entry->global_stypes, __entry->interface_stypes)
 );
 
 TRACE_EVENT(rdev_return_int_tx_rx,
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 6590efbbcbb9..df75e58eca5d 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -5,7 +5,7 @@
  * Copyright 2007-2009	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
  * Copyright 2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2019 Intel Corporation
+ * Copyright (C) 2018-2020 Intel Corporation
  */
 #include <linux/export.h>
 #include <linux/bitops.h>
@@ -72,7 +72,7 @@ u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband,
 }
 EXPORT_SYMBOL(ieee80211_mandatory_rates);
 
-int ieee80211_channel_to_frequency(int chan, enum nl80211_band band)
+u32 ieee80211_channel_to_freq_khz(int chan, enum nl80211_band band)
 {
 	/* see 802.11 17.3.8.3.2 and Annex J
 	 * there are overlapping channel numbers in 5GHz and 2GHz bands */
@@ -81,15 +81,15 @@ int ieee80211_channel_to_frequency(int chan, enum nl80211_band band)
 	switch (band) {
 	case NL80211_BAND_2GHZ:
 		if (chan == 14)
-			return 2484;
+			return MHZ_TO_KHZ(2484);
 		else if (chan < 14)
-			return 2407 + chan * 5;
+			return MHZ_TO_KHZ(2407 + chan * 5);
 		break;
 	case NL80211_BAND_5GHZ:
 		if (chan >= 182 && chan <= 196)
-			return 4000 + chan * 5;
+			return MHZ_TO_KHZ(4000 + chan * 5);
 		else
-			return 5000 + chan * 5;
+			return MHZ_TO_KHZ(5000 + chan * 5);
 		break;
 	case NL80211_BAND_6GHZ:
 		/* see 802.11ax D4.1 27.3.22.2 */
@@ -98,17 +98,20 @@ int ieee80211_channel_to_frequency(int chan, enum nl80211_band band)
 		break;
 	case NL80211_BAND_60GHZ:
 		if (chan < 7)
-			return 56160 + chan * 2160;
+			return MHZ_TO_KHZ(56160 + chan * 2160);
 		break;
 	default:
 		;
 	}
 	return 0; /* not supported */
 }
-EXPORT_SYMBOL(ieee80211_channel_to_frequency);
+EXPORT_SYMBOL(ieee80211_channel_to_freq_khz);
 
-int ieee80211_frequency_to_channel(int freq)
+int ieee80211_freq_khz_to_channel(u32 freq)
 {
+	/* TODO: just handle MHz for now */
+	freq = KHZ_TO_MHZ(freq);
+
 	/* see 802.11 17.3.8.3.2 and Annex J */
 	if (freq == 2484)
 		return 14;
@@ -126,9 +129,10 @@ int ieee80211_frequency_to_channel(int freq)
 	else
 		return 0;
 }
-EXPORT_SYMBOL(ieee80211_frequency_to_channel);
+EXPORT_SYMBOL(ieee80211_freq_khz_to_channel);
 
-struct ieee80211_channel *ieee80211_get_channel(struct wiphy *wiphy, int freq)
+struct ieee80211_channel *ieee80211_get_channel_khz(struct wiphy *wiphy,
+						    u32 freq)
 {
 	enum nl80211_band band;
 	struct ieee80211_supported_band *sband;
@@ -141,14 +145,16 @@ struct ieee80211_channel *ieee80211_get_channel(struct wiphy *wiphy, int freq)
 			continue;
 
 		for (i = 0; i < sband->n_channels; i++) {
-			if (sband->channels[i].center_freq == freq)
-				return &sband->channels[i];
+			struct ieee80211_channel *chan = &sband->channels[i];
+
+			if (ieee80211_channel_to_khz(chan) == freq)
+				return chan;
 		}
 	}
 
 	return NULL;
 }
-EXPORT_SYMBOL(ieee80211_get_channel);
+EXPORT_SYMBOL(ieee80211_get_channel_khz);
 
 static void set_mandatory_flags_band(struct ieee80211_supported_band *sband)
 {
@@ -2030,10 +2036,10 @@ EXPORT_SYMBOL(cfg80211_send_layer2_update);
 
 int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
 			      enum ieee80211_vht_chanwidth bw,
-			      int mcs, bool ext_nss_bw_capable)
+			      int mcs, bool ext_nss_bw_capable,
+			      unsigned int max_vht_nss)
 {
 	u16 map = le16_to_cpu(cap->supp_mcs.rx_mcs_map);
-	int max_vht_nss = 0;
 	int ext_nss_bw;
 	int supp_width;
 	int i, mcs_encoding;
@@ -2041,7 +2047,7 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
 	if (map == 0xffff)
 		return 0;
 
-	if (WARN_ON(mcs > 9))
+	if (WARN_ON(mcs > 9 || max_vht_nss > 8))
 		return 0;
 	if (mcs <= 7)
 		mcs_encoding = 0;
@@ -2050,16 +2056,18 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
 	else
 		mcs_encoding = 2;
 
-	/* find max_vht_nss for the given MCS */
-	for (i = 7; i >= 0; i--) {
-		int supp = (map >> (2 * i)) & 3;
+	if (!max_vht_nss) {
+		/* find max_vht_nss for the given MCS */
+		for (i = 7; i >= 0; i--) {
+			int supp = (map >> (2 * i)) & 3;
 
-		if (supp == 3)
-			continue;
+			if (supp == 3)
+				continue;
 
-		if (supp >= mcs_encoding) {
-			max_vht_nss = i + 1;
-			break;
+			if (supp >= mcs_encoding) {
+				max_vht_nss = i + 1;
+				break;
+			}
 		}
 	}
 
diff --git a/net/x25/x25_subr.c b/net/x25/x25_subr.c
index 8aa415a38814..0285aaa1e93c 100644
--- a/net/x25/x25_subr.c
+++ b/net/x25/x25_subr.c
@@ -357,6 +357,12 @@ void x25_disconnect(struct sock *sk, int reason, unsigned char cause,
 		sk->sk_state_change(sk);
 		sock_set_flag(sk, SOCK_DEAD);
 	}
+	if (x25->neighbour) {
+		read_lock_bh(&x25_list_lock);
+		x25_neigh_put(x25->neighbour);
+		x25->neighbour = NULL;
+		read_unlock_bh(&x25_list_lock);
+	}
 }
 
 /*
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index c350108aa38d..f6e6609f70a3 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -322,7 +322,7 @@ bool xsk_umem_consume_tx(struct xdp_umem *umem, struct xdp_desc *desc)
 		if (!xskq_cons_peek_desc(xs->tx, desc, umem))
 			continue;
 
-		/* This is the backpreassure mechanism for the Tx path.
+		/* This is the backpressure mechanism for the Tx path.
 		 * Reserve space in the completion queue and only proceed
 		 * if there is space in it. This avoids having to implement
 		 * any buffering in the Tx path.
@@ -406,7 +406,7 @@ static int xsk_generic_xmit(struct sock *sk)
 		addr = desc.addr;
 		buffer = xdp_umem_get_data(xs->umem, addr);
 		err = skb_store_bits(skb, 0, buffer, len);
-		/* This is the backpreassure mechanism for the Tx path.
+		/* This is the backpressure mechanism for the Tx path.
 		 * Reserve space in the completion queue and only proceed
 		 * if there is space in it. This avoids having to implement
 		 * any buffering in the Tx path.
diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig
index 6921a18201a0..b7fd9c838416 100644
--- a/net/xfrm/Kconfig
+++ b/net/xfrm/Kconfig
@@ -99,4 +99,7 @@ config NET_KEY_MIGRATE
 
 	  If unsure, say N.
 
+config XFRM_ESPINTCP
+	bool
+
 endif # INET
diff --git a/net/xfrm/Makefile b/net/xfrm/Makefile
index 212a4fcb4a88..2d4bb4b9f75e 100644
--- a/net/xfrm/Makefile
+++ b/net/xfrm/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_XFRM_ALGO) += xfrm_algo.o
 obj-$(CONFIG_XFRM_USER) += xfrm_user.o
 obj-$(CONFIG_XFRM_IPCOMP) += xfrm_ipcomp.o
 obj-$(CONFIG_XFRM_INTERFACE) += xfrm_interface.o
-obj-$(CONFIG_INET_ESPINTCP) += espintcp.o
+obj-$(CONFIG_XFRM_ESPINTCP) += espintcp.o
diff --git a/net/xfrm/espintcp.c b/net/xfrm/espintcp.c
index 037ea156d2f9..100e29682b48 100644
--- a/net/xfrm/espintcp.c
+++ b/net/xfrm/espintcp.c
@@ -6,6 +6,9 @@
 #include <net/espintcp.h>
 #include <linux/skmsg.h>
 #include <net/inet_common.h>
+#if IS_ENABLED(CONFIG_IPV6)
+#include <net/ipv6_stubs.h>
+#endif
 
 static void handle_nonesp(struct espintcp_ctx *ctx, struct sk_buff *skb,
 			  struct sock *sk)
@@ -31,7 +34,12 @@ static void handle_esp(struct sk_buff *skb, struct sock *sk)
 	rcu_read_lock();
 	skb->dev = dev_get_by_index_rcu(sock_net(sk), skb->skb_iif);
 	local_bh_disable();
-	xfrm4_rcv_encap(skb, IPPROTO_ESP, 0, TCP_ENCAP_ESPINTCP);
+#if IS_ENABLED(CONFIG_IPV6)
+	if (sk->sk_family == AF_INET6)
+		ipv6_stub->xfrm6_rcv_encap(skb, IPPROTO_ESP, 0, TCP_ENCAP_ESPINTCP);
+	else
+#endif
+		xfrm4_rcv_encap(skb, IPPROTO_ESP, 0, TCP_ENCAP_ESPINTCP);
 	local_bh_enable();
 	rcu_read_unlock();
 }
@@ -347,6 +355,9 @@ static int espintcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 
 static struct proto espintcp_prot __ro_after_init;
 static struct proto_ops espintcp_ops __ro_after_init;
+static struct proto espintcp6_prot;
+static struct proto_ops espintcp6_ops;
+static DEFINE_MUTEX(tcpv6_prot_mutex);
 
 static void espintcp_data_ready(struct sock *sk)
 {
@@ -379,15 +390,20 @@ static void espintcp_destruct(struct sock *sk)
 {
 	struct espintcp_ctx *ctx = espintcp_getctx(sk);
 
+	ctx->saved_destruct(sk);
 	kfree(ctx);
 }
 
 bool tcp_is_ulp_esp(struct sock *sk)
 {
-	return sk->sk_prot == &espintcp_prot;
+	return sk->sk_prot == &espintcp_prot || sk->sk_prot == &espintcp6_prot;
 }
 EXPORT_SYMBOL_GPL(tcp_is_ulp_esp);
 
+static void build_protos(struct proto *espintcp_prot,
+			 struct proto_ops *espintcp_ops,
+			 const struct proto *orig_prot,
+			 const struct proto_ops *orig_ops);
 static int espintcp_init_sk(struct sock *sk)
 {
 	struct inet_connection_sock *icsk = inet_csk(sk);
@@ -415,10 +431,22 @@ static int espintcp_init_sk(struct sock *sk)
 	strp_check_rcv(&ctx->strp);
 	skb_queue_head_init(&ctx->ike_queue);
 	skb_queue_head_init(&ctx->out_queue);
-	sk->sk_prot = &espintcp_prot;
-	sk->sk_socket->ops = &espintcp_ops;
+
+	if (sk->sk_family == AF_INET) {
+		sk->sk_prot = &espintcp_prot;
+		sk->sk_socket->ops = &espintcp_ops;
+	} else {
+		mutex_lock(&tcpv6_prot_mutex);
+		if (!espintcp6_prot.recvmsg)
+			build_protos(&espintcp6_prot, &espintcp6_ops, sk->sk_prot, sk->sk_socket->ops);
+		mutex_unlock(&tcpv6_prot_mutex);
+
+		sk->sk_prot = &espintcp6_prot;
+		sk->sk_socket->ops = &espintcp6_ops;
+	}
 	ctx->saved_data_ready = sk->sk_data_ready;
 	ctx->saved_write_space = sk->sk_write_space;
+	ctx->saved_destruct = sk->sk_destruct;
 	sk->sk_data_ready = espintcp_data_ready;
 	sk->sk_write_space = espintcp_write_space;
 	sk->sk_destruct = espintcp_destruct;
@@ -489,6 +517,20 @@ static __poll_t espintcp_poll(struct file *file, struct socket *sock,
 	return mask;
 }
 
+static void build_protos(struct proto *espintcp_prot,
+			 struct proto_ops *espintcp_ops,
+			 const struct proto *orig_prot,
+			 const struct proto_ops *orig_ops)
+{
+	memcpy(espintcp_prot, orig_prot, sizeof(struct proto));
+	memcpy(espintcp_ops, orig_ops, sizeof(struct proto_ops));
+	espintcp_prot->sendmsg = espintcp_sendmsg;
+	espintcp_prot->recvmsg = espintcp_recvmsg;
+	espintcp_prot->close = espintcp_close;
+	espintcp_prot->release_cb = espintcp_release;
+	espintcp_ops->poll = espintcp_poll;
+}
+
 static struct tcp_ulp_ops espintcp_ulp __read_mostly = {
 	.name = "espintcp",
 	.owner = THIS_MODULE,
@@ -497,13 +539,7 @@ static struct tcp_ulp_ops espintcp_ulp __read_mostly = {
 
 void __init espintcp_init(void)
 {
-	memcpy(&espintcp_prot, &tcp_prot, sizeof(tcp_prot));
-	memcpy(&espintcp_ops, &inet_stream_ops, sizeof(inet_stream_ops));
-	espintcp_prot.sendmsg = espintcp_sendmsg;
-	espintcp_prot.recvmsg = espintcp_recvmsg;
-	espintcp_prot.close = espintcp_close;
-	espintcp_prot.release_cb = espintcp_release;
-	espintcp_ops.poll = espintcp_poll;
+	build_protos(&espintcp_prot, &espintcp_ops, &tcp_prot, &inet_stream_ops);
 
 	tcp_register_ulp(&espintcp_ulp);
 }
diff --git a/net/xfrm/xfrm_device.c b/net/xfrm/xfrm_device.c
index 6cc7f7f1dd68..f50d1f97cf8e 100644
--- a/net/xfrm/xfrm_device.c
+++ b/net/xfrm/xfrm_device.c
@@ -25,12 +25,10 @@ static void __xfrm_transport_prep(struct xfrm_state *x, struct sk_buff *skb,
 	struct xfrm_offload *xo = xfrm_offload(skb);
 
 	skb_reset_mac_len(skb);
-	pskb_pull(skb, skb->mac_len + hsize + x->props.header_len);
-
-	if (xo->flags & XFRM_GSO_SEGMENT) {
-		skb_reset_transport_header(skb);
+	if (xo->flags & XFRM_GSO_SEGMENT)
 		skb->transport_header -= x->props.header_len;
-	}
+
+	pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len);
 }
 
 static void __xfrm_mode_tunnel_prep(struct xfrm_state *x, struct sk_buff *skb,
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index aa35f23c4912..8a202c44f89a 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -644,7 +644,7 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
 		dev_put(skb->dev);
 
 		spin_lock(&x->lock);
-		if (nexthdr <= 0) {
+		if (nexthdr < 0) {
 			if (nexthdr == -EBADMSG) {
 				xfrm_audit_state_icvfail(x, skb,
 							 x->type->proto);
diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index 3361e3ac5714..c407ecbc5d46 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -145,7 +145,6 @@ static int xfrmi_create(struct net_device *dev)
 	if (err < 0)
 		goto out;
 
-	dev_hold(dev);
 	xfrmi_link(xfrmn, xi);
 
 	return 0;
@@ -175,7 +174,6 @@ static void xfrmi_dev_uninit(struct net_device *dev)
 	struct xfrmi_net *xfrmn = net_generic(xi->net, xfrmi_net_id);
 
 	xfrmi_unlink(xfrmn, xi);
-	dev_put(dev);
 }
 
 static void xfrmi_scrub_packet(struct sk_buff *skb, bool xnet)
@@ -750,13 +748,35 @@ static struct rtnl_link_ops xfrmi_link_ops __read_mostly = {
 	.get_link_net	= xfrmi_get_link_net,
 };
 
+static void __net_exit xfrmi_exit_batch_net(struct list_head *net_exit_list)
+{
+	struct net *net;
+	LIST_HEAD(list);
+
+	rtnl_lock();
+	list_for_each_entry(net, net_exit_list, exit_list) {
+		struct xfrmi_net *xfrmn = net_generic(net, xfrmi_net_id);
+		struct xfrm_if __rcu **xip;
+		struct xfrm_if *xi;
+
+		for (xip = &xfrmn->xfrmi[0];
+		     (xi = rtnl_dereference(*xip)) != NULL;
+		     xip = &xi->next)
+			unregister_netdevice_queue(xi->dev, &list);
+	}
+	unregister_netdevice_many(&list);
+	rtnl_unlock();
+}
+
 static struct pernet_operations xfrmi_net_ops = {
+	.exit_batch = xfrmi_exit_batch_net,
 	.id   = &xfrmi_net_id,
 	.size = sizeof(struct xfrmi_net),
 };
 
 static struct xfrm6_protocol xfrmi_esp6_protocol __read_mostly = {
 	.handler	=	xfrm6_rcv,
+	.input_handler	=	xfrm_input,
 	.cb_handler	=	xfrmi_rcv_cb,
 	.err_handler	=	xfrmi6_err,
 	.priority	=	10,
@@ -764,6 +784,7 @@ static struct xfrm6_protocol xfrmi_esp6_protocol __read_mostly = {
 
 static struct xfrm6_protocol xfrmi_ah6_protocol __read_mostly = {
 	.handler	=	xfrm6_rcv,
+	.input_handler	=	xfrm_input,
 	.cb_handler	=	xfrmi_rcv_cb,
 	.err_handler	=	xfrmi6_err,
 	.priority	=	10,
@@ -771,6 +792,7 @@ static struct xfrm6_protocol xfrmi_ah6_protocol __read_mostly = {
 
 static struct xfrm6_protocol xfrmi_ipcomp6_protocol __read_mostly = {
 	.handler	=	xfrm6_rcv,
+	.input_handler	=	xfrm_input,
 	.cb_handler	=	xfrmi_rcv_cb,
 	.err_handler	=	xfrmi6_err,
 	.priority	=	10,
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 2fd3d990d992..69c33cab8f49 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -583,18 +583,20 @@ int xfrm_output(struct sock *sk, struct sk_buff *skb)
 		xfrm_state_hold(x);
 
 		if (skb_is_gso(skb)) {
-			skb_shinfo(skb)->gso_type |= SKB_GSO_ESP;
+			if (skb->inner_protocol)
+				return xfrm_output_gso(net, sk, skb);
 
-			return xfrm_output2(net, sk, skb);
+			skb_shinfo(skb)->gso_type |= SKB_GSO_ESP;
+			goto out;
 		}
 
 		if (x->xso.dev && x->xso.dev->features & NETIF_F_HW_ESP_TX_CSUM)
 			goto out;
+	} else {
+		if (skb_is_gso(skb))
+			return xfrm_output_gso(net, sk, skb);
 	}
 
-	if (skb_is_gso(skb))
-		return xfrm_output_gso(net, sk, skb);
-
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		err = skb_checksum_help(skb);
 		if (err) {
diff --git a/samples/Kconfig b/samples/Kconfig
index 9d236c346de5..5c31971a5745 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -190,5 +190,11 @@ config SAMPLE_INTEL_MEI
 	help
 	  Build a sample program to work with mei device.
 
+config SAMPLE_WATCH_QUEUE
+	bool "Build example /dev/watch_queue notification consumer"
+	depends on HEADERS_INSTALL
+	help
+	  Build example userspace program to use the new mount_notify(),
+	  sb_notify() syscalls and the KEYCTL_WATCH_KEY keyctl() function.
 
 endif # SAMPLES
diff --git a/samples/Makefile b/samples/Makefile
index f8f847b4f61f..8617edf7f19a 100644
--- a/samples/Makefile
+++ b/samples/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_VIDEO_PCI_SKELETON)	+= v4l/
 obj-y					+= vfio-mdev/
 subdir-$(CONFIG_SAMPLE_VFS)		+= vfs
 obj-$(CONFIG_SAMPLE_INTEL_MEI)		+= mei/
+subdir-$(CONFIG_SAMPLE_WATCH_QUEUE)	+= watch_queue
diff --git a/samples/mei/mei-amt-version.c b/samples/mei/mei-amt-version.c
index 32234481ad7d..ad3e56042f96 100644
--- a/samples/mei/mei-amt-version.c
+++ b/samples/mei/mei-amt-version.c
@@ -267,7 +267,7 @@ struct amt_host_if_msg_header {
 struct amt_host_if_resp_header {
 	struct amt_host_if_msg_header header;
 	uint32_t status;
-	unsigned char data[0];
+	unsigned char data[];
 } __attribute__((packed));
 
 const uuid_le MEI_IAMTHIF = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d,  \
diff --git a/samples/watch_queue/Makefile b/samples/watch_queue/Makefile
new file mode 100644
index 000000000000..eec00dd0a8df
--- /dev/null
+++ b/samples/watch_queue/Makefile
@@ -0,0 +1,7 @@
+# List of programs to build
+hostprogs-y := watch_test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_watch_test.o += -I$(objtree)/usr/include
diff --git a/samples/watch_queue/watch_test.c b/samples/watch_queue/watch_test.c
new file mode 100644
index 000000000000..0eaff5dc04c3
--- /dev/null
+++ b/samples/watch_queue/watch_test.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Use /dev/watch_queue to watch for notifications.
+ *
+ * Copyright (C) 2020 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+
+#define _GNU_SOURCE
+#include <stdbool.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sys/ioctl.h>
+#include <limits.h>
+#include <linux/watch_queue.h>
+#include <linux/unistd.h>
+#include <linux/keyctl.h>
+
+#ifndef KEYCTL_WATCH_KEY
+#define KEYCTL_WATCH_KEY -1
+#endif
+#ifndef __NR_watch_devices
+#define __NR_watch_devices -1
+#endif
+
+#define BUF_SIZE 256
+
+static long keyctl_watch_key(int key, int watch_fd, int watch_id)
+{
+	return syscall(__NR_keyctl, KEYCTL_WATCH_KEY, key, watch_fd, watch_id);
+}
+
+static const char *key_subtypes[256] = {
+	[NOTIFY_KEY_INSTANTIATED]	= "instantiated",
+	[NOTIFY_KEY_UPDATED]		= "updated",
+	[NOTIFY_KEY_LINKED]		= "linked",
+	[NOTIFY_KEY_UNLINKED]		= "unlinked",
+	[NOTIFY_KEY_CLEARED]		= "cleared",
+	[NOTIFY_KEY_REVOKED]		= "revoked",
+	[NOTIFY_KEY_INVALIDATED]	= "invalidated",
+	[NOTIFY_KEY_SETATTR]		= "setattr",
+};
+
+static void saw_key_change(struct watch_notification *n, size_t len)
+{
+	struct key_notification *k = (struct key_notification *)n;
+
+	if (len != sizeof(struct key_notification)) {
+		fprintf(stderr, "Incorrect key message length\n");
+		return;
+	}
+
+	printf("KEY %08x change=%u[%s] aux=%u\n",
+	       k->key_id, n->subtype, key_subtypes[n->subtype], k->aux);
+}
+
+/*
+ * Consume and display events.
+ */
+static void consumer(int fd)
+{
+	unsigned char buffer[433], *p, *end;
+	union {
+		struct watch_notification n;
+		unsigned char buf1[128];
+	} n;
+	ssize_t buf_len;
+
+	for (;;) {
+		buf_len = read(fd, buffer, sizeof(buffer));
+		if (buf_len == -1) {
+			perror("read");
+			exit(1);
+		}
+
+		if (buf_len == 0) {
+			printf("-- END --\n");
+			return;
+		}
+
+		if (buf_len > sizeof(buffer)) {
+			fprintf(stderr, "Read buffer overrun: %zd\n", buf_len);
+			return;
+		}
+
+		printf("read() = %zd\n", buf_len);
+
+		p = buffer;
+		end = buffer + buf_len;
+		while (p < end) {
+			size_t largest, len;
+
+			largest = end - p;
+			if (largest > 128)
+				largest = 128;
+			if (largest < sizeof(struct watch_notification)) {
+				fprintf(stderr, "Short message header: %zu\n", largest);
+				return;
+			}
+			memcpy(&n, p, largest);
+
+			printf("NOTIFY[%03zx]: ty=%06x sy=%02x i=%08x\n",
+			       p - buffer, n.n.type, n.n.subtype, n.n.info);
+
+			len = n.n.info & WATCH_INFO_LENGTH;
+			if (len < sizeof(n.n) || len > largest) {
+				fprintf(stderr, "Bad message length: %zu/%zu\n", len, largest);
+				exit(1);
+			}
+
+			switch (n.n.type) {
+			case WATCH_TYPE_META:
+				switch (n.n.subtype) {
+				case WATCH_META_REMOVAL_NOTIFICATION:
+					printf("REMOVAL of watchpoint %08x\n",
+					       (n.n.info & WATCH_INFO_ID) >>
+					       WATCH_INFO_ID__SHIFT);
+					break;
+				case WATCH_META_LOSS_NOTIFICATION:
+					printf("-- LOSS --\n");
+					break;
+				default:
+					printf("other meta record\n");
+					break;
+				}
+				break;
+			case WATCH_TYPE_KEY_NOTIFY:
+				saw_key_change(&n.n, len);
+				break;
+			default:
+				printf("other type\n");
+				break;
+			}
+
+			p += len;
+		}
+	}
+}
+
+static struct watch_notification_filter filter = {
+	.nr_filters	= 1,
+	.filters = {
+		[0]	= {
+			.type			= WATCH_TYPE_KEY_NOTIFY,
+			.subtype_filter[0]	= UINT_MAX,
+		},
+	},
+};
+
+int main(int argc, char **argv)
+{
+	int pipefd[2], fd;
+
+	if (pipe2(pipefd, O_NOTIFICATION_PIPE) == -1) {
+		perror("pipe2");
+		exit(1);
+	}
+	fd = pipefd[0];
+
+	if (ioctl(fd, IOC_WATCH_QUEUE_SET_SIZE, BUF_SIZE) == -1) {
+		perror("/dev/watch_queue(size)");
+		exit(1);
+	}
+
+	if (ioctl(fd, IOC_WATCH_QUEUE_SET_FILTER, &filter) == -1) {
+		perror("/dev/watch_queue(filter)");
+		exit(1);
+	}
+
+	if (keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fd, 0x01) == -1) {
+		perror("keyctl");
+		exit(1);
+	}
+
+	if (keyctl_watch_key(KEY_SPEC_USER_KEYRING, fd, 0x02) == -1) {
+		perror("keyctl");
+		exit(1);
+	}
+
+	consumer(fd);
+	exit(0);
+}
diff --git a/scripts/Makefile.kcsan b/scripts/Makefile.kcsan
new file mode 100644
index 000000000000..caf1111a28ae
--- /dev/null
+++ b/scripts/Makefile.kcsan
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+ifdef CONFIG_KCSAN
+
+CFLAGS_KCSAN := -fsanitize=thread
+
+endif # CONFIG_KCSAN
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 4b799737722c..37d7d27b85da 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -149,6 +149,16 @@ _c_flags += $(if $(patsubst n%,, \
 	$(CFLAGS_KCOV))
 endif
 
+#
+# Enable KCSAN flags except some files or directories we don't want to check
+# (depends on variables KCSAN_SANITIZE_obj.o, KCSAN_SANITIZE)
+#
+ifeq ($(CONFIG_KCSAN),y)
+_c_flags += $(if $(patsubst n%,, \
+	$(KCSAN_SANITIZE_$(basetarget).o)$(KCSAN_SANITIZE)y), \
+	$(CFLAGS_KCSAN))
+endif
+
 # $(srctree)/$(src) for including checkin headers from generated source files
 # $(objtree)/$(obj) for including generated headers from checkin source files
 ifeq ($(KBUILD_EXTMOD),)
diff --git a/scripts/atomic/fallbacks/acquire b/scripts/atomic/fallbacks/acquire
index e38871e64db6..ea489acc285e 100755
--- a/scripts/atomic/fallbacks/acquire
+++ b/scripts/atomic/fallbacks/acquire
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 ${atomic}_${pfx}${name}${sfx}_acquire(${params})
 {
 	${ret} ret = ${atomic}_${pfx}${name}${sfx}_relaxed(${args});
diff --git a/scripts/atomic/fallbacks/add_negative b/scripts/atomic/fallbacks/add_negative
index e6f4815637de..03cc2e07fac5 100755
--- a/scripts/atomic/fallbacks/add_negative
+++ b/scripts/atomic/fallbacks/add_negative
@@ -8,7 +8,7 @@ cat <<EOF
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-static inline bool
+static __always_inline bool
 ${atomic}_add_negative(${int} i, ${atomic}_t *v)
 {
 	return ${atomic}_add_return(i, v) < 0;
diff --git a/scripts/atomic/fallbacks/add_unless b/scripts/atomic/fallbacks/add_unless
index 792533885fbf..daf87a04c850 100755
--- a/scripts/atomic/fallbacks/add_unless
+++ b/scripts/atomic/fallbacks/add_unless
@@ -8,7 +8,7 @@ cat << EOF
  * Atomically adds @a to @v, if @v was not already @u.
  * Returns true if the addition was done.
  */
-static inline bool
+static __always_inline bool
 ${atomic}_add_unless(${atomic}_t *v, ${int} a, ${int} u)
 {
 	return ${atomic}_fetch_add_unless(v, a, u) != u;
diff --git a/scripts/atomic/fallbacks/andnot b/scripts/atomic/fallbacks/andnot
index 9f3a3216b5e3..14efce01225a 100755
--- a/scripts/atomic/fallbacks/andnot
+++ b/scripts/atomic/fallbacks/andnot
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 ${atomic}_${pfx}andnot${sfx}${order}(${int} i, ${atomic}_t *v)
 {
 	${retstmt}${atomic}_${pfx}and${sfx}${order}(~i, v);
diff --git a/scripts/atomic/fallbacks/dec b/scripts/atomic/fallbacks/dec
index 10bbc82be31d..118282f3a5a3 100755
--- a/scripts/atomic/fallbacks/dec
+++ b/scripts/atomic/fallbacks/dec
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 ${atomic}_${pfx}dec${sfx}${order}(${atomic}_t *v)
 {
 	${retstmt}${atomic}_${pfx}sub${sfx}${order}(1, v);
diff --git a/scripts/atomic/fallbacks/dec_and_test b/scripts/atomic/fallbacks/dec_and_test
index 0ce7103b3df2..f8967a891117 100755
--- a/scripts/atomic/fallbacks/dec_and_test
+++ b/scripts/atomic/fallbacks/dec_and_test
@@ -7,7 +7,7 @@ cat <<EOF
  * returns true if the result is 0, or false for all other
  * cases.
  */
-static inline bool
+static __always_inline bool
 ${atomic}_dec_and_test(${atomic}_t *v)
 {
 	return ${atomic}_dec_return(v) == 0;
diff --git a/scripts/atomic/fallbacks/dec_if_positive b/scripts/atomic/fallbacks/dec_if_positive
index c52eacec43c8..cfb380bd2da6 100755
--- a/scripts/atomic/fallbacks/dec_if_positive
+++ b/scripts/atomic/fallbacks/dec_if_positive
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 ${atomic}_dec_if_positive(${atomic}_t *v)
 {
 	${int} dec, c = ${atomic}_read(v);
diff --git a/scripts/atomic/fallbacks/dec_unless_positive b/scripts/atomic/fallbacks/dec_unless_positive
index 8a2578f14268..69cb7aa01f9c 100755
--- a/scripts/atomic/fallbacks/dec_unless_positive
+++ b/scripts/atomic/fallbacks/dec_unless_positive
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline bool
+static __always_inline bool
 ${atomic}_dec_unless_positive(${atomic}_t *v)
 {
 	${int} c = ${atomic}_read(v);
diff --git a/scripts/atomic/fallbacks/fence b/scripts/atomic/fallbacks/fence
index 82f68fa6931a..92a3a4691bab 100755
--- a/scripts/atomic/fallbacks/fence
+++ b/scripts/atomic/fallbacks/fence
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 ${atomic}_${pfx}${name}${sfx}(${params})
 {
 	${ret} ret;
diff --git a/scripts/atomic/fallbacks/fetch_add_unless b/scripts/atomic/fallbacks/fetch_add_unless
index d2c091db7eae..fffbc0d16fdf 100755
--- a/scripts/atomic/fallbacks/fetch_add_unless
+++ b/scripts/atomic/fallbacks/fetch_add_unless
@@ -8,7 +8,7 @@ cat << EOF
  * Atomically adds @a to @v, so long as @v was not already @u.
  * Returns original value of @v
  */
-static inline ${int}
+static __always_inline ${int}
 ${atomic}_fetch_add_unless(${atomic}_t *v, ${int} a, ${int} u)
 {
 	${int} c = ${atomic}_read(v);
diff --git a/scripts/atomic/fallbacks/inc b/scripts/atomic/fallbacks/inc
index f866b3ad2353..10751cd62829 100755
--- a/scripts/atomic/fallbacks/inc
+++ b/scripts/atomic/fallbacks/inc
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 ${atomic}_${pfx}inc${sfx}${order}(${atomic}_t *v)
 {
 	${retstmt}${atomic}_${pfx}add${sfx}${order}(1, v);
diff --git a/scripts/atomic/fallbacks/inc_and_test b/scripts/atomic/fallbacks/inc_and_test
index 4e2068869f7e..4acea9c93604 100755
--- a/scripts/atomic/fallbacks/inc_and_test
+++ b/scripts/atomic/fallbacks/inc_and_test
@@ -7,7 +7,7 @@ cat <<EOF
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-static inline bool
+static __always_inline bool
 ${atomic}_inc_and_test(${atomic}_t *v)
 {
 	return ${atomic}_inc_return(v) == 0;
diff --git a/scripts/atomic/fallbacks/inc_not_zero b/scripts/atomic/fallbacks/inc_not_zero
index a7c45c8d107c..d9f7b97aab42 100755
--- a/scripts/atomic/fallbacks/inc_not_zero
+++ b/scripts/atomic/fallbacks/inc_not_zero
@@ -6,7 +6,7 @@ cat <<EOF
  * Atomically increments @v by 1, if @v is non-zero.
  * Returns true if the increment was done.
  */
-static inline bool
+static __always_inline bool
 ${atomic}_inc_not_zero(${atomic}_t *v)
 {
 	return ${atomic}_add_unless(v, 1, 0);
diff --git a/scripts/atomic/fallbacks/inc_unless_negative b/scripts/atomic/fallbacks/inc_unless_negative
index 0c266e71dbd4..177a7cb51eda 100755
--- a/scripts/atomic/fallbacks/inc_unless_negative
+++ b/scripts/atomic/fallbacks/inc_unless_negative
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline bool
+static __always_inline bool
 ${atomic}_inc_unless_negative(${atomic}_t *v)
 {
 	${int} c = ${atomic}_read(v);
diff --git a/scripts/atomic/fallbacks/read_acquire b/scripts/atomic/fallbacks/read_acquire
index 75863b5203f7..12fa83cb3a6d 100755
--- a/scripts/atomic/fallbacks/read_acquire
+++ b/scripts/atomic/fallbacks/read_acquire
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 ${atomic}_read_acquire(const ${atomic}_t *v)
 {
 	return smp_load_acquire(&(v)->counter);
diff --git a/scripts/atomic/fallbacks/release b/scripts/atomic/fallbacks/release
index 3f628a3802d9..730d2a6d3e07 100755
--- a/scripts/atomic/fallbacks/release
+++ b/scripts/atomic/fallbacks/release
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 ${atomic}_${pfx}${name}${sfx}_release(${params})
 {
 	__atomic_release_fence();
diff --git a/scripts/atomic/fallbacks/set_release b/scripts/atomic/fallbacks/set_release
index 45bb5e0cfc08..e5d72c717434 100755
--- a/scripts/atomic/fallbacks/set_release
+++ b/scripts/atomic/fallbacks/set_release
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline void
+static __always_inline void
 ${atomic}_set_release(${atomic}_t *v, ${int} i)
 {
 	smp_store_release(&(v)->counter, i);
diff --git a/scripts/atomic/fallbacks/sub_and_test b/scripts/atomic/fallbacks/sub_and_test
index 289ef17a2d7a..6cfe4ed49746 100755
--- a/scripts/atomic/fallbacks/sub_and_test
+++ b/scripts/atomic/fallbacks/sub_and_test
@@ -8,7 +8,7 @@ cat <<EOF
  * true if the result is zero, or false for all
  * other cases.
  */
-static inline bool
+static __always_inline bool
 ${atomic}_sub_and_test(${int} i, ${atomic}_t *v)
 {
 	return ${atomic}_sub_return(i, v) == 0;
diff --git a/scripts/atomic/fallbacks/try_cmpxchg b/scripts/atomic/fallbacks/try_cmpxchg
index 4ed85e2f5378..c7a26213b978 100755
--- a/scripts/atomic/fallbacks/try_cmpxchg
+++ b/scripts/atomic/fallbacks/try_cmpxchg
@@ -1,5 +1,5 @@
 cat <<EOF
-static inline bool
+static __always_inline bool
 ${atomic}_try_cmpxchg${order}(${atomic}_t *v, ${int} *old, ${int} new)
 {
 	${int} r, o = *old;
diff --git a/scripts/atomic/gen-atomic-fallback.sh b/scripts/atomic/gen-atomic-fallback.sh
index 1bd7c1707633..b6c6f5d306a7 100755
--- a/scripts/atomic/gen-atomic-fallback.sh
+++ b/scripts/atomic/gen-atomic-fallback.sh
@@ -149,6 +149,8 @@ cat << EOF
 #ifndef _LINUX_ATOMIC_FALLBACK_H
 #define _LINUX_ATOMIC_FALLBACK_H
 
+#include <linux/compiler.h>
+
 EOF
 
 for xchg in "xchg" "cmpxchg" "cmpxchg64"; do
diff --git a/scripts/atomic/gen-atomic-instrumented.sh b/scripts/atomic/gen-atomic-instrumented.sh
index e09812372b17..6afadf73da17 100755
--- a/scripts/atomic/gen-atomic-instrumented.sh
+++ b/scripts/atomic/gen-atomic-instrumented.sh
@@ -20,7 +20,7 @@ gen_param_check()
 	# We don't write to constant parameters
 	[ ${type#c} != ${type} ] && rw="read"
 
-	printf "\tkasan_check_${rw}(${name}, sizeof(*${name}));\n"
+	printf "\tinstrument_atomic_${rw}(${name}, sizeof(*${name}));\n"
 }
 
 #gen_param_check(arg...)
@@ -84,7 +84,7 @@ gen_proto_order_variant()
 	[ ! -z "${guard}" ] && printf "#if ${guard}\n"
 
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 ${atomicname}(${params})
 {
 ${checks}
@@ -107,7 +107,7 @@ cat <<EOF
 #define ${xchg}(ptr, ...)						\\
 ({									\\
 	typeof(ptr) __ai_ptr = (ptr);					\\
-	kasan_check_write(__ai_ptr, ${mult}sizeof(*__ai_ptr));		\\
+	instrument_atomic_write(__ai_ptr, ${mult}sizeof(*__ai_ptr));		\\
 	arch_${xchg}(__ai_ptr, __VA_ARGS__);				\\
 })
 EOF
@@ -147,7 +147,8 @@ cat << EOF
 #define _ASM_GENERIC_ATOMIC_INSTRUMENTED_H
 
 #include <linux/build_bug.h>
-#include <linux/kasan-checks.h>
+#include <linux/compiler.h>
+#include <linux/instrumented.h>
 
 EOF
 
diff --git a/scripts/atomic/gen-atomic-long.sh b/scripts/atomic/gen-atomic-long.sh
index c240a7231b2e..e318d3f92e53 100755
--- a/scripts/atomic/gen-atomic-long.sh
+++ b/scripts/atomic/gen-atomic-long.sh
@@ -46,7 +46,7 @@ gen_proto_order_variant()
 	local retstmt="$(gen_ret_stmt "${meta}")"
 
 cat <<EOF
-static inline ${ret}
+static __always_inline ${ret}
 atomic_long_${name}(${params})
 {
 	${retstmt}${atomic}_${name}(${argscast});
@@ -64,6 +64,7 @@ cat << EOF
 #ifndef _ASM_GENERIC_ATOMIC_LONG_H
 #define _ASM_GENERIC_ATOMIC_LONG_H
 
+#include <linux/compiler.h>
 #include <asm/types.h>
 
 #ifdef CONFIG_64BIT
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index 877ca2c88246..d98540552941 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -160,7 +160,7 @@ struct item {
 	struct item	*next;
 	unsigned int	len;
 	unsigned int	hash;
-	char		name[0];
+	char		name[];
 };
 
 #define HASHSZ 256
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index eac40f0abd56..4a5c6bb3d2af 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -43,6 +43,8 @@ my $list_types = 0;
 my $fix = 0;
 my $fix_inplace = 0;
 my $root;
+my $gitroot = $ENV{'GIT_DIR'};
+$gitroot = ".git" if !defined($gitroot);
 my %debug;
 my %camelcase = ();
 my %use_type = ();
@@ -244,6 +246,8 @@ list_types(0) if ($list_types);
 $fix = 1 if ($fix_inplace);
 $check_orig = $check;
 
+die "$P: --git cannot be used with --file or --fix\n" if ($git && ($file || $fix));
+
 my $exit = 0;
 
 my $perl_version_ok = 1;
@@ -267,11 +271,11 @@ if ($color =~ /^[01]$/) {
 } elsif ($color =~ /^auto$/i) {
 	$color = (-t STDOUT);
 } else {
-	die "Invalid color mode: $color\n";
+	die "$P: Invalid color mode: $color\n";
 }
 
 # skip TAB size 1 to avoid additional checks on $tabsize - 1
-die "Invalid TAB size: $tabsize\n" if ($tabsize < 2);
+die "$P: Invalid TAB size: $tabsize\n" if ($tabsize < 2);
 
 sub hash_save_array_words {
 	my ($hashRef, $arrayRef) = @_;
@@ -897,7 +901,7 @@ sub is_maintained_obsolete {
 sub is_SPDX_License_valid {
 	my ($license) = @_;
 
-	return 1 if (!$tree || which("python") eq "" || !(-e "$root/scripts/spdxcheck.py") || !(-e "$root/.git"));
+	return 1 if (!$tree || which("python") eq "" || !(-e "$root/scripts/spdxcheck.py") || !(-e "$gitroot"));
 
 	my $root_path = abs_path($root);
 	my $status = `cd "$root_path"; echo "$license" | python scripts/spdxcheck.py -`;
@@ -915,7 +919,7 @@ sub seed_camelcase_includes {
 
 	$camelcase_seeded = 1;
 
-	if (-e ".git") {
+	if (-e "$gitroot") {
 		my $git_last_include_commit = `${git_command} log --no-merges --pretty=format:"%h%n" -1 -- include`;
 		chomp $git_last_include_commit;
 		$camelcase_cache = ".checkpatch-camelcase.git.$git_last_include_commit";
@@ -943,7 +947,7 @@ sub seed_camelcase_includes {
 		return;
 	}
 
-	if (-e ".git") {
+	if (-e "$gitroot") {
 		$files = `${git_command} ls-files "include/*.h"`;
 		@include_files = split('\n', $files);
 	}
@@ -966,7 +970,7 @@ sub seed_camelcase_includes {
 sub git_commit_info {
 	my ($commit, $id, $desc) = @_;
 
-	return ($id, $desc) if ((which("git") eq "") || !(-e ".git"));
+	return ($id, $desc) if ((which("git") eq "") || !(-e "$gitroot"));
 
 	my $output = `${git_command} log --no-color --format='%H %s' -1 $commit 2>&1`;
 	$output =~ s/^\s*//gm;
@@ -1005,7 +1009,7 @@ my $fixlinenr = -1;
 
 # If input is git commits, extract all commits from the commit expressions.
 # For example, HEAD-3 means we need check 'HEAD, HEAD~1, HEAD~2'.
-die "$P: No git repository found\n" if ($git && !-e ".git");
+die "$P: No git repository found\n" if ($git && !-e "$gitroot");
 
 if ($git) {
 	my @commits = ();
@@ -1674,8 +1678,16 @@ sub ctx_statement_level {
 sub ctx_locate_comment {
 	my ($first_line, $end_line) = @_;
 
+	# If c99 comment on the current line, or the line before or after
+	my ($current_comment) = ($rawlines[$end_line - 1] =~ m@^\+.*(//.*$)@);
+	return $current_comment if (defined $current_comment);
+	($current_comment) = ($rawlines[$end_line - 2] =~ m@^[\+ ].*(//.*$)@);
+	return $current_comment if (defined $current_comment);
+	($current_comment) = ($rawlines[$end_line] =~ m@^[\+ ].*(//.*$)@);
+	return $current_comment if (defined $current_comment);
+
 	# Catch a comment on the end of the line itself.
-	my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*(?:\\\s*)?$@);
+	($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*(?:\\\s*)?$@);
 	return $current_comment if (defined $current_comment);
 
 	# Look through the context and try and figure out if there is a
@@ -3060,14 +3072,43 @@ sub process {
 			#print "is_start<$is_start> is_end<$is_end> length<$length>\n";
 		}
 
-# check for MAINTAINERS entries that don't have the right form
-		if ($realfile =~ /^MAINTAINERS$/ &&
-		    $rawline =~ /^\+[A-Z]:/ &&
-		    $rawline !~ /^\+[A-Z]:\t\S/) {
-			if (WARN("MAINTAINERS_STYLE",
-				 "MAINTAINERS entries use one tab after TYPE:\n" . $herecurr) &&
-			    $fix) {
-				$fixed[$fixlinenr] =~ s/^(\+[A-Z]):\s*/$1:\t/;
+# check MAINTAINERS entries
+		if ($realfile =~ /^MAINTAINERS$/) {
+# check MAINTAINERS entries for the right form
+			if ($rawline =~ /^\+[A-Z]:/ &&
+			    $rawline !~ /^\+[A-Z]:\t\S/) {
+				if (WARN("MAINTAINERS_STYLE",
+					 "MAINTAINERS entries use one tab after TYPE:\n" . $herecurr) &&
+				    $fix) {
+					$fixed[$fixlinenr] =~ s/^(\+[A-Z]):\s*/$1:\t/;
+				}
+			}
+# check MAINTAINERS entries for the right ordering too
+			my $preferred_order = 'MRLSWQBCPTFXNK';
+			if ($rawline =~ /^\+[A-Z]:/ &&
+			    $prevrawline =~ /^[\+ ][A-Z]:/) {
+				$rawline =~ /^\+([A-Z]):\s*(.*)/;
+				my $cur = $1;
+				my $curval = $2;
+				$prevrawline =~ /^[\+ ]([A-Z]):\s*(.*)/;
+				my $prev = $1;
+				my $prevval = $2;
+				my $curindex = index($preferred_order, $cur);
+				my $previndex = index($preferred_order, $prev);
+				if ($curindex < 0) {
+					WARN("MAINTAINERS_STYLE",
+					     "Unknown MAINTAINERS entry type: '$cur'\n" . $herecurr);
+				} else {
+					if ($previndex >= 0 && $curindex < $previndex) {
+						WARN("MAINTAINERS_STYLE",
+						     "Misordered MAINTAINERS entry - list '$cur:' before '$prev:'\n" . $hereprev);
+					} elsif ((($prev eq 'F' && $cur eq 'F') ||
+						  ($prev eq 'X' && $cur eq 'X')) &&
+						 ($prevval cmp $curval) > 0) {
+						WARN("MAINTAINERS_STYLE",
+						     "Misordered MAINTAINERS entry - list file patterns in alphabetic order\n" . $hereprev);
+					}
+				}
 			}
 		}
 
diff --git a/scripts/decodecode b/scripts/decodecode
index ba8b8d5834e6..fbdb325cdf4f 100755
--- a/scripts/decodecode
+++ b/scripts/decodecode
@@ -126,7 +126,7 @@ faultlinenum=$(( $(wc -l $T.oo  | cut -d" " -f1) - \
 faultline=`cat $T.dis | head -1 | cut -d":" -f2-`
 faultline=`echo "$faultline" | sed -e 's/\[/\\\[/g; s/\]/\\\]/g'`
 
-cat $T.oo | sed -e "${faultlinenum}s/^\(.*:\)\(.*\)/\1\*\2\t\t<-- trapping instruction/"
+cat $T.oo | sed -e "${faultlinenum}s/^\([^:]*:\)\(.*\)/\1\*\2\t\t<-- trapping instruction/"
 echo
 cat $T.aa
 cleanup
diff --git a/scripts/gcc-plugins/Makefile b/scripts/gcc-plugins/Makefile
index f22858b2c3d6..80f354289eeb 100644
--- a/scripts/gcc-plugins/Makefile
+++ b/scripts/gcc-plugins/Makefile
@@ -4,6 +4,7 @@ GCC_PLUGINS_DIR := $(shell $(CC) -print-file-name=plugin)
 HOST_EXTRACXXFLAGS += -I$(GCC_PLUGINS_DIR)/include -I$(src) -std=gnu++98 -fno-rtti
 HOST_EXTRACXXFLAGS += -fno-exceptions -fasynchronous-unwind-tables -ggdb
 HOST_EXTRACXXFLAGS += -Wno-narrowing -Wno-unused-variable -Wno-c++11-compat
+HOST_EXTRACXXFLAGS += -Wno-format-diag
 
 $(obj)/randomize_layout_plugin.o: $(objtree)/$(obj)/randomize_layout_seed.h
 quiet_cmd_create_randomize_layout_seed = GENSEED $@
diff --git a/scripts/gcc-plugins/gcc-common.h b/scripts/gcc-plugins/gcc-common.h
index 17f06079a712..9ad76b7f3f10 100644
--- a/scripts/gcc-plugins/gcc-common.h
+++ b/scripts/gcc-plugins/gcc-common.h
@@ -35,7 +35,9 @@
 #include "ggc.h"
 #include "timevar.h"
 
+#if BUILDING_GCC_VERSION < 10000
 #include "params.h"
+#endif
 
 #if BUILDING_GCC_VERSION <= 4009
 #include "pointer-set.h"
@@ -847,6 +849,7 @@ static inline gimple gimple_build_assign_with_ops(enum tree_code subcode, tree l
 	return gimple_build_assign(lhs, subcode, op1, op2 PASS_MEM_STAT);
 }
 
+#if BUILDING_GCC_VERSION < 10000
 template <>
 template <>
 inline bool is_a_helper<const ggoto *>::test(const_gimple gs)
@@ -860,6 +863,7 @@ inline bool is_a_helper<const greturn *>::test(const_gimple gs)
 {
 	return gs->code == GIMPLE_RETURN;
 }
+#endif
 
 static inline gasm *as_a_gasm(gimple stmt)
 {
diff --git a/scripts/gcc-plugins/stackleak_plugin.c b/scripts/gcc-plugins/stackleak_plugin.c
index dbd37460c573..cc75eeba0be1 100644
--- a/scripts/gcc-plugins/stackleak_plugin.c
+++ b/scripts/gcc-plugins/stackleak_plugin.c
@@ -51,7 +51,6 @@ static void stackleak_add_track_stack(gimple_stmt_iterator *gsi, bool after)
 	gimple stmt;
 	gcall *stackleak_track_stack;
 	cgraph_node_ptr node;
-	int frequency;
 	basic_block bb;
 
 	/* Insert call to void stackleak_track_stack(void) */
@@ -68,9 +67,9 @@ static void stackleak_add_track_stack(gimple_stmt_iterator *gsi, bool after)
 	bb = gimple_bb(stackleak_track_stack);
 	node = cgraph_get_create_node(track_function_decl);
 	gcc_assert(node);
-	frequency = compute_call_stmt_bb_frequency(current_function_decl, bb);
 	cgraph_create_edge(cgraph_get_node(current_function_decl), node,
-			stackleak_track_stack, bb->count, frequency);
+			stackleak_track_stack, bb->count,
+			compute_call_stmt_bb_frequency(current_function_decl, bb));
 }
 
 static bool is_alloca(gimple stmt)
diff --git a/scripts/gdb/linux/rbtree.py b/scripts/gdb/linux/rbtree.py
index 39db889b874c..c4b991607917 100644
--- a/scripts/gdb/linux/rbtree.py
+++ b/scripts/gdb/linux/rbtree.py
@@ -12,7 +12,7 @@ rb_node_type = utils.CachedType("struct rb_node")
 
 def rb_first(root):
     if root.type == rb_root_type.get_type():
-        node = node.address.cast(rb_root_type.get_type().pointer())
+        node = root.address.cast(rb_root_type.get_type().pointer())
     elif root.type != rb_root_type.get_type().pointer():
         raise gdb.GdbError("Must be struct rb_root not {}".format(root.type))
 
@@ -28,7 +28,7 @@ def rb_first(root):
 
 def rb_last(root):
     if root.type == rb_root_type.get_type():
-        node = node.address.cast(rb_root_type.get_type().pointer())
+        node = root.address.cast(rb_root_type.get_type().pointer())
     elif root.type != rb_root_type.get_type().pointer():
         raise gdb.GdbError("Must be struct rb_root not {}".format(root.type))
 
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 6cbcd1a3e113..6d973f3685f9 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -57,7 +57,7 @@ my $status = 0;
 my $letters = "";
 my $keywords = 1;
 my $sections = 0;
-my $file_emails = 0;
+my $email_file_emails = 0;
 my $from_filename = 0;
 my $pattern_depth = 0;
 my $self_test = undef;
@@ -69,6 +69,12 @@ my $vcs_used = 0;
 
 my $exit = 0;
 
+my @files = ();
+my @fixes = ();			# If a patch description includes Fixes: lines
+my @range = ();
+my @keyword_tvi = ();
+my @file_emails = ();
+
 my %commit_author_hash;
 my %commit_signer_hash;
 
@@ -266,7 +272,7 @@ if (!GetOptions(
 		'pattern-depth=i' => \$pattern_depth,
 		'k|keywords!' => \$keywords,
 		'sections!' => \$sections,
-		'fe|file-emails!' => \$file_emails,
+		'fe|file-emails!' => \$email_file_emails,
 		'f|file' => \$from_filename,
 		'find-maintainer-files' => \$find_maintainer_files,
 		'mpath|maintainer-path=s' => \$maintainer_path,
@@ -424,6 +430,22 @@ sub read_all_maintainer_files {
     }
 }
 
+sub maintainers_in_file {
+    my ($file) = @_;
+
+    return if ($file =~ m@\bMAINTAINERS$@);
+
+    if (-f $file && ($email_file_emails || $file =~ /\.yaml$/)) {
+	open(my $f, '<', $file)
+	    or die "$P: Can't open $file: $!\n";
+	my $text = do { local($/) ; <$f> };
+	close($f);
+
+	my @poss_addr = $text =~ m$[A-Za-zÀ-ÿ\"\' \,\.\+-]*\s*[\,]*\s*[\(\<\{]{0,1}[A-Za-z0-9_\.\+-]+\@[A-Za-z0-9\.-]+\.[A-Za-z0-9]+[\)\>\}]{0,1}$g;
+	push(@file_emails, clean_file_emails(@poss_addr));
+    }
+}
+
 #
 # Read mail address map
 #
@@ -504,12 +526,6 @@ sub read_mailmap {
 
 ## use the filenames on the command line or find the filenames in the patchfiles
 
-my @files = ();
-my @fixes = ();			# If a patch description includes Fixes: lines
-my @range = ();
-my @keyword_tvi = ();
-my @file_emails = ();
-
 if (!@ARGV) {
     push(@ARGV, "&STDIN");
 }
@@ -527,7 +543,7 @@ foreach my $file (@ARGV) {
 	$file =~ s/^\Q${cur_path}\E//;	#strip any absolute path
 	$file =~ s/^\Q${lk_path}\E//;	#or the path to the lk tree
 	push(@files, $file);
-	if ($file ne "MAINTAINERS" && -f $file && ($keywords || $file_emails)) {
+	if ($file ne "MAINTAINERS" && -f $file && $keywords) {
 	    open(my $f, '<', $file)
 		or die "$P: Can't open $file: $!\n";
 	    my $text = do { local($/) ; <$f> };
@@ -539,10 +555,6 @@ foreach my $file (@ARGV) {
 		    }
 		}
 	    }
-	    if ($file_emails) {
-		my @poss_addr = $text =~ m$[A-Za-zÀ-ÿ\"\' \,\.\+-]*\s*[\,]*\s*[\(\<\{]{0,1}[A-Za-z0-9_\.\+-]+\@[A-Za-z0-9\.-]+\.[A-Za-z0-9]+[\)\>\}]{0,1}$g;
-		push(@file_emails, clean_file_emails(@poss_addr));
-	    }
 	}
     } else {
 	my $file_cnt = @files;
@@ -923,6 +935,8 @@ sub get_maintainers {
 		print("\n");
 	    }
 	}
+
+	maintainers_in_file($file);
     }
 
     if ($keywords) {
@@ -1835,7 +1849,7 @@ tm toggle maintainers
 tg toggle git entries
 tl toggle open list entries
 ts toggle subscriber list entries
-f  emails in file       [$file_emails]
+f  emails in file       [$email_file_emails]
 k  keywords in file     [$keywords]
 r  remove duplicates    [$email_remove_duplicates]
 p# pattern match depth  [$pattern_depth]
@@ -1960,7 +1974,7 @@ EOT
 		bool_invert(\$email_git_all_signature_types);
 		$rerun = 1;
 	    } elsif ($sel eq "f") {
-		bool_invert(\$file_emails);
+		bool_invert(\$email_file_emails);
 		$rerun = 1;
 	    } elsif ($sel eq "r") {
 		bool_invert(\$email_remove_duplicates);
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 3e8dea6e0a95..6dc3078649fa 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -34,7 +34,7 @@ struct sym_entry {
 	unsigned int len;
 	unsigned int start_pos;
 	unsigned int percpu_absolute;
-	unsigned char sym[0];
+	unsigned char sym[];
 };
 
 struct addr_range {
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index f746ca8fa403..f68d76dd97ba 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -213,7 +213,9 @@ my $type_constant = '\b``([^\`]+)``\b';
 my $type_constant2 = '\%([-_\w]+)';
 my $type_func = '(\w+)\(\)';
 my $type_param = '\@(\w*((\.\w+)|(->\w+))*(\.\.\.)?)';
+my $type_param_ref = '([\!]?)\@(\w*((\.\w+)|(->\w+))*(\.\.\.)?)';
 my $type_fp_param = '\@(\w+)\(\)';  # Special RST handling for func ptr params
+my $type_fp_param2 = '\@(\w+->\S+)\(\)';  # Special RST handling for structs with func ptr params
 my $type_env = '(\$\w+)';
 my $type_enum = '\&(enum\s*([_\w]+))';
 my $type_struct = '\&(struct\s*([_\w]+))';
@@ -236,6 +238,7 @@ my @highlights_man = (
                       [$type_typedef, "\\\\fI\$1\\\\fP"],
                       [$type_union, "\\\\fI\$1\\\\fP"],
                       [$type_param, "\\\\fI\$1\\\\fP"],
+                      [$type_param_ref, "\\\\fI\$1\$2\\\\fP"],
                       [$type_member, "\\\\fI\$1\$2\$3\\\\fP"],
                       [$type_fallback, "\\\\fI\$1\\\\fP"]
 		     );
@@ -249,6 +252,7 @@ my @highlights_rst = (
                        [$type_member_func, "\\:c\\:type\\:`\$1\$2\$3\\\\(\\\\) <\$1>`"],
                        [$type_member, "\\:c\\:type\\:`\$1\$2\$3 <\$1>`"],
 		       [$type_fp_param, "**\$1\\\\(\\\\)**"],
+		       [$type_fp_param2, "**\$1\\\\(\\\\)**"],
                        [$type_func, "\$1()"],
                        [$type_enum, "\\:c\\:type\\:`\$1 <\$2>`"],
                        [$type_struct, "\\:c\\:type\\:`\$1 <\$2>`"],
@@ -256,7 +260,7 @@ my @highlights_rst = (
                        [$type_union, "\\:c\\:type\\:`\$1 <\$2>`"],
                        # in rst this can refer to any type
                        [$type_fallback, "\\:c\\:type\\:`\$1`"],
-                       [$type_param, "**\$1**"]
+                       [$type_param_ref, "**\$1\$2**"]
 		      );
 my $blankline_rst = "\n";
 
@@ -327,13 +331,14 @@ my $lineprefix="";
 
 # Parser states
 use constant {
-    STATE_NORMAL        => 0, # normal code
-    STATE_NAME          => 1, # looking for function name
-    STATE_BODY_MAYBE    => 2, # body - or maybe more description
-    STATE_BODY          => 3, # the body of the comment
-    STATE_PROTO         => 4, # scanning prototype
-    STATE_DOCBLOCK      => 5, # documentation block
-    STATE_INLINE        => 6, # gathering documentation outside main block
+    STATE_NORMAL        => 0,        # normal code
+    STATE_NAME          => 1,        # looking for function name
+    STATE_BODY_MAYBE    => 2,        # body - or maybe more description
+    STATE_BODY          => 3,        # the body of the comment
+    STATE_BODY_WITH_BLANK_LINE => 4, # the body, which has a blank line
+    STATE_PROTO         => 5,        # scanning prototype
+    STATE_DOCBLOCK      => 6,        # documentation block
+    STATE_INLINE        => 7,        # gathering doc outside main block
 };
 my $state;
 my $in_doc_sect;
@@ -1953,6 +1958,12 @@ sub process_body($$) {
 	}
     }
 
+    if ($state == STATE_BODY_WITH_BLANK_LINE && /^\s*\*\s?\S/) {
+	dump_section($file, $section, $contents);
+	$section = $section_default;
+	$contents = "";
+    }
+
     if (/$doc_sect/i) { # case insensitive for supported section names
 	$newsection = $1;
 	$newcontents = $2;
@@ -2006,18 +2017,21 @@ sub process_body($$) {
 	$state = STATE_PROTO;
 	$brcount = 0;
     } elsif (/$doc_content/) {
-	# miguel-style comment kludge, look for blank lines after
-	# @parameter line to signify start of description
 	if ($1 eq "") {
-	    if ($section =~ m/^@/ || $section eq $section_context) {
+	    if ($section eq $section_context) {
 		dump_section($file, $section, $contents);
 		$section = $section_default;
 		$contents = "";
 		$new_start_line = $.;
+		$state = STATE_BODY;
 	    } else {
+		if ($section ne $section_default) {
+		    $state = STATE_BODY_WITH_BLANK_LINE;
+		} else {
+		    $state = STATE_BODY;
+		}
 		$contents .= "\n";
 	    }
-	    $state = STATE_BODY;
 	} elsif ($state == STATE_BODY_MAYBE) {
 	    # Continued declaration purpose
 	    chomp($declaration_purpose);
@@ -2169,7 +2183,8 @@ sub process_file($) {
 	    process_normal();
 	} elsif ($state == STATE_NAME) {
 	    process_name($file, $_);
-	} elsif ($state == STATE_BODY || $state == STATE_BODY_MAYBE) {
+	} elsif ($state == STATE_BODY || $state == STATE_BODY_MAYBE ||
+		 $state == STATE_BODY_WITH_BLANK_LINE) {
 	    process_body($file, $_);
 	} elsif ($state == STATE_INLINE) { # scanning for inline parameters
 	    process_inline($file, $_);
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index d09ab4afbda4..3adef49250af 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -55,6 +55,29 @@ modpost_link()
 	${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${objects}
 }
 
+objtool_link()
+{
+	local objtoolopt;
+
+	if [ -n "${CONFIG_VMLINUX_VALIDATION}" ]; then
+		objtoolopt="check"
+		if [ -z "${CONFIG_FRAME_POINTER}" ]; then
+			objtoolopt="${objtoolopt} --no-fp"
+		fi
+		if [ -n "${CONFIG_GCOV_KERNEL}" ]; then
+			objtoolopt="${objtoolopt} --no-unreachable"
+		fi
+		if [ -n "${CONFIG_RETPOLINE}" ]; then
+			objtoolopt="${objtoolopt} --retpoline"
+		fi
+		if [ -n "${CONFIG_X86_SMAP}" ]; then
+			objtoolopt="${objtoolopt} --uaccess"
+		fi
+		info OBJTOOL ${1}
+		tools/objtool/objtool ${objtoolopt} ${1}
+	fi
+}
+
 # Link of vmlinux
 # ${1} - output file
 # ${2}, ${3}, ... - optional extra .o files
@@ -251,6 +274,7 @@ ${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1
 #link vmlinux.o
 info LD vmlinux.o
 modpost_link vmlinux.o
+objtool_link vmlinux.o
 
 # modpost vmlinux.o to check for section mismatches
 ${MAKE} -f "${srctree}/scripts/Makefile.modpost" MODPOST_VMLINUX=1
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 02d5d79da284..9599e2a3f1e6 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -954,6 +954,8 @@ static const struct dmifield {
 	{ "bvn", DMI_BIOS_VENDOR },
 	{ "bvr", DMI_BIOS_VERSION },
 	{ "bd",  DMI_BIOS_DATE },
+	{ "br",  DMI_BIOS_RELEASE },
+	{ "efr", DMI_EC_FIRMWARE_RELEASE },
 	{ "svn", DMI_SYS_VENDOR },
 	{ "pn",  DMI_PRODUCT_NAME },
 	{ "pvr", DMI_PRODUCT_VERSION },
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 5c3c50c5ec52..5826c6483b85 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -166,7 +166,7 @@ struct symbol {
 				    *  (only for external modules) **/
 	unsigned int is_static:1;  /* 1 if symbol is not global */
 	enum export  export;       /* Type of export */
-	char name[0];
+	char name[];
 };
 
 static struct symbol *symbolhash[SYMBOL_HASH_SIZE];
@@ -2251,6 +2251,7 @@ static void add_header(struct buffer *b, struct module *mod)
 	 * Include build-salt.h after module.h in order to
 	 * inherit the definitions.
 	 */
+	buf_printf(b, "#define INCLUDE_VERMAGIC\n");
 	buf_printf(b, "#include <linux/build-salt.h>\n");
 	buf_printf(b, "#include <linux/vermagic.h>\n");
 	buf_printf(b, "#include <linux/compiler.h>\n");
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index 60dca9b7106b..39f6c29fb568 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -111,7 +111,7 @@ buf_write(struct buffer *buf, const char *s, int len);
 
 struct namespace_list {
 	struct namespace_list *next;
-	char namespace[0];
+	char namespace[];
 };
 
 struct module {
diff --git a/scripts/sphinx-pre-install b/scripts/sphinx-pre-install
index fa3fb05cd54b..c680c3efb176 100755
--- a/scripts/sphinx-pre-install
+++ b/scripts/sphinx-pre-install
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 use strict;
 
-# Copyright (c) 2017-2019 Mauro Carvalho Chehab <mchehab@kernel.org>
+# Copyright (c) 2017-2020 Mauro Carvalho Chehab <mchehab@kernel.org>
 #
 
 my $prefix = "./";
@@ -22,10 +22,16 @@ my $need = 0;
 my $optional = 0;
 my $need_symlink = 0;
 my $need_sphinx = 0;
+my $need_venv = 0;
+my $need_virtualenv = 0;
 my $rec_sphinx_upgrade = 0;
 my $install = "";
 my $virtenv_dir = "";
+my $python_cmd = "";
 my $min_version;
+my $cur_version;
+my $rec_version = "1.7.9";	# PDF won't build here
+my $min_pdf_version = "2.4.4";	# Min version where pdf builds
 
 #
 # Command line arguments
@@ -142,12 +148,30 @@ sub findprog($)
 	}
 }
 
+sub find_python_no_venv()
+{
+	my $prog = shift;
+
+	my $cur_dir = qx(pwd);
+	$cur_dir =~ s/\s+$//;
+
+	foreach my $dir (split(/:/, $ENV{PATH})) {
+		next if ($dir =~ m,($cur_dir)/sphinx,);
+		return "$dir/python3" if(-x "$dir/python3");
+	}
+	foreach my $dir (split(/:/, $ENV{PATH})) {
+		next if ($dir =~ m,($cur_dir)/sphinx,);
+		return "$dir/python" if(-x "$dir/python");
+	}
+	return "python";
+}
+
 sub check_program($$)
 {
 	my $prog = shift;
 	my $is_optional = shift;
 
-	return if findprog($prog);
+	return $prog if findprog($prog);
 
 	add_package($prog, $is_optional);
 }
@@ -168,9 +192,9 @@ sub check_python_module($$)
 	my $prog = shift;
 	my $is_optional = shift;
 
-	my $err = system("python3 -c 'import $prog' 2>/dev/null /dev/null");
-	return if ($err == 0);
-	my $err = system("python -c 'import $prog' 2>/dev/null /dev/null");
+	return if (!$python_cmd);
+
+	my $err = system("$python_cmd -c 'import $prog' 2>/dev/null /dev/null");
 	return if ($err == 0);
 
 	add_package($prog, $is_optional);
@@ -225,23 +249,33 @@ sub get_sphinx_fname()
 		return $fname;
 	}
 
-	if ($virtualenv) {
-		my $prog = findprog("virtualenv-3");
-		$prog = findprog("virtualenv-3.5") if (!$prog);
+	return "";
+}
 
-		check_program("virtualenv", 0) if (!$prog);
-		$need_sphinx = 1;
-	} else {
-		add_package("python-sphinx", 0);
-	}
+sub get_sphinx_version($)
+{
+	my $cmd = shift;
+	my $ver;
 
-	return "";
+	open IN, "$cmd --version 2>&1 |";
+	while (<IN>) {
+		if (m/^\s*sphinx-build\s+([\d\.]+)(\+\/[\da-f]+)?$/) {
+			$ver=$1;
+			last;
+		}
+		# Sphinx 1.2.x uses a different format
+		if (m/^\s*Sphinx.*\s+([\d\.]+)$/) {
+			$ver=$1;
+			last;
+		}
+	}
+	close IN;
+	return $ver;
 }
 
 sub check_sphinx()
 {
-	my $rec_version;
-	my $cur_version;
+	my $default_version;
 
 	open IN, $conf or die "Can't open $conf";
 	while (<IN>) {
@@ -257,45 +291,39 @@ sub check_sphinx()
 	open IN, $requirement_file or die "Can't open $requirement_file";
 	while (<IN>) {
 		if (m/^\s*Sphinx\s*==\s*([\d\.]+)$/) {
-			$rec_version=$1;
+			$default_version=$1;
 			last;
 		}
 	}
 	close IN;
 
-	die "Can't get recommended sphinx version from $requirement_file" if (!$min_version);
+	die "Can't get default sphinx version from $requirement_file" if (!$default_version);
 
-	$virtenv_dir = $virtenv_prefix . $rec_version;
+	$virtenv_dir = $virtenv_prefix . $default_version;
 
 	my $sphinx = get_sphinx_fname();
-	return if ($sphinx eq "");
-
-	open IN, "$sphinx --version 2>&1 |" or die "$sphinx returned an error";
-	while (<IN>) {
-		if (m/^\s*sphinx-build\s+([\d\.]+)(\+\/[\da-f]+)?$/) {
-			$cur_version=$1;
-			last;
-		}
-		# Sphinx 1.2.x uses a different format
-		if (m/^\s*Sphinx.*\s+([\d\.]+)$/) {
-			$cur_version=$1;
-			last;
-		}
+	if ($sphinx eq "") {
+		$need_sphinx = 1;
+		return;
 	}
-	close IN;
+
+	$cur_version = get_sphinx_version($sphinx);
+	die ("$sphinx returned an error") if (!$cur_version);
 
 	die "$sphinx didn't return its version" if (!$cur_version);
 
 	if ($cur_version lt $min_version) {
 		printf "ERROR: Sphinx version is %s. It should be >= %s (recommended >= %s)\n",
-		       $cur_version, $min_version, $rec_version;;
+		       $cur_version, $min_version, $default_version;
 		$need_sphinx = 1;
 		return;
 	}
 
 	if ($cur_version lt $rec_version) {
-		printf "Sphinx version %s\n", $cur_version;
-		print "Warning: It is recommended at least Sphinx version $rec_version.\n";
+		$rec_sphinx_upgrade = 1;
+		return;
+	}
+	if ($cur_version lt $min_pdf_version) {
 		$rec_sphinx_upgrade = 1;
 		return;
 	}
@@ -336,6 +364,7 @@ sub give_debian_hints()
 	my %map = (
 		"python-sphinx"		=> "python3-sphinx",
 		"sphinx_rtd_theme"	=> "python3-sphinx-rtd-theme",
+		"ensurepip"		=> "python3-venv",
 		"virtualenv"		=> "virtualenv",
 		"dot"			=> "graphviz",
 		"convert"		=> "imagemagick",
@@ -349,7 +378,8 @@ sub give_debian_hints()
 				   "fonts-dejavu", 2);
 
 		check_missing_file(["/usr/share/fonts/noto-cjk/NotoSansCJK-Regular.ttc",
-				   "/usr/share/fonts/opentype/noto/NotoSerifCJK-Regular.ttc"],
+				    "/usr/share/fonts/opentype/noto/NotoSansCJK-Regular.ttc",
+				    "/usr/share/fonts/opentype/noto/NotoSerifCJK-Regular.ttc"],
 				   "fonts-noto-cjk", 2);
 	}
 
@@ -446,9 +476,11 @@ sub give_opensuse_hints()
 		"convert"		=> "ImageMagick",
 		"Pod::Usage"		=> "perl-Pod-Usage",
 		"xelatex"		=> "texlive-xetex-bin",
-		"rsvg-convert"		=> "rsvg-view",
 	);
 
+	# On Tumbleweed, this package is also named rsvg-convert
+	$map{"rsvg-convert"} = "rsvg-view" if (!($system_release =~ /Tumbleweed/));
+
 	my @suse_tex_pkgs = (
 		"texlive-babel-english",
 		"texlive-caption",
@@ -491,7 +523,7 @@ sub give_mageia_hints()
 		"convert"		=> "ImageMagick",
 		"Pod::Usage"		=> "perl-Pod-Usage",
 		"xelatex"		=> "texlive",
-		"rsvg-convert"		=> "librsvg2-tools",
+		"rsvg-convert"		=> "librsvg2",
 	);
 
 	my @tex_pkgs = (
@@ -500,16 +532,29 @@ sub give_mageia_hints()
 
 	$map{"latexmk"} = "texlive-collection-basic";
 
+	my $packager_cmd;
+	my $noto_sans;
+	if ($system_release =~ /OpenMandriva/) {
+		$packager_cmd = "dnf install";
+		$noto_sans = "noto-sans-cjk-fonts";
+		@tex_pkgs = ( "texlive-collection-fontsextra" );
+	} else {
+		$packager_cmd = "urpmi";
+		$noto_sans = "google-noto-sans-cjk-ttc-fonts";
+	}
+
+
 	if ($pdf) {
-		check_missing_file(["/usr/share/fonts/google-noto-cjk/NotoSansCJK-Regular.ttc"],
-				   "google-noto-sans-cjk-ttc-fonts", 2);
+		check_missing_file(["/usr/share/fonts/google-noto-cjk/NotoSansCJK-Regular.ttc",
+				    "/usr/share/fonts/TTF/NotoSans-Regular.ttf"],
+				   $noto_sans, 2);
 	}
 
 	check_rpm_missing(\@tex_pkgs, 2) if ($pdf);
 	check_missing(\%map);
 
 	return if (!$need && !$optional);
-	printf("You should run:\n\n\tsudo urpmi $install\n");
+	printf("You should run:\n\n\tsudo $packager_cmd $install\n");
 }
 
 sub give_arch_linux_hints()
@@ -557,7 +602,8 @@ sub give_gentoo_hints()
 			   "media-fonts/dejavu", 2) if ($pdf);
 
 	if ($pdf) {
-		check_missing_file(["/usr/share/fonts/noto-cjk/NotoSansCJKsc-Regular.otf"],
+		check_missing_file(["/usr/share/fonts/noto-cjk/NotoSansCJKsc-Regular.otf",
+				    "/usr/share/fonts/noto-cjk/NotoSerifCJK-Regular.ttc"],
 				   "media-fonts/noto-cjk", 2);
 	}
 
@@ -572,10 +618,10 @@ sub give_gentoo_hints()
 	my $portage_imagemagick = "/etc/portage/package.use/imagemagick";
 	my $portage_cairo = "/etc/portage/package.use/graphviz";
 
-	if (qx(cat $portage_imagemagick) ne "$imagemagick\n") {
+	if (qx(grep imagemagick $portage_imagemagick 2>/dev/null) eq "") {
 		printf("\tsudo su -c 'echo \"$imagemagick\" > $portage_imagemagick'\n")
 	}
-	if (qx(cat $portage_cairo) ne  "$cairo\n") {
+	if (qx(grep graphviz $portage_cairo 2>/dev/null) eq  "") {
 		printf("\tsudo su -c 'echo \"$cairo\" > $portage_cairo'\n");
 	}
 
@@ -622,6 +668,10 @@ sub check_distros()
 		give_mageia_hints;
 		return;
 	}
+	if ($system_release =~ /OpenMandriva/) {
+		give_mageia_hints;
+		return;
+	}
 	if ($system_release =~ /Arch Linux/) {
 		give_arch_linux_hints;
 		return;
@@ -651,22 +701,58 @@ sub check_distros()
 
 sub deactivate_help()
 {
-	printf "\tIf you want to exit the virtualenv, you can use:\n";
+	printf "\nIf you want to exit the virtualenv, you can use:\n";
 	printf "\tdeactivate\n";
 }
 
 sub check_needs()
 {
-	# Check for needed programs/tools
+	# Check if Sphinx is already accessible from current environment
 	check_sphinx();
 
 	if ($system_release) {
-		print "Detected OS: $system_release.\n\n";
+		print "Detected OS: $system_release.\n";
 	} else {
-		print "Unknown OS\n\n";
+		print "Unknown OS\n";
+	}
+	printf "Sphinx version: %s\n\n", $cur_version if ($cur_version);
+
+	# Check python command line, trying first python3
+	$python_cmd = findprog("python3");
+	$python_cmd = check_program("python", 0) if (!$python_cmd);
+
+	# Check the type of virtual env, depending on Python version
+	if ($python_cmd) {
+		if ($virtualenv) {
+			my $tmp = qx($python_cmd --version 2>&1);
+			if ($tmp =~ m/(\d+\.)(\d+\.)/) {
+				if ($1 >= 3 && $2 >= 3) {
+					$need_venv = 1;		# python 3.3 or upper
+				} else {
+					$need_virtualenv = 1;
+				}
+				if ($1 < 3) {
+					# Complain if it finds python2 (or worse)
+					printf "Warning: python$1 support is deprecated. Use it with caution!\n";
+				}
+			} else {
+				die "Warning: couldn't identify $python_cmd version!";
+			}
+		} else {
+			add_package("python-sphinx", 0);
+		}
 	}
 
-	print "To upgrade Sphinx, use:\n\n" if ($rec_sphinx_upgrade);
+	# Set virtualenv command line, if python < 3.3
+	my $virtualenv_cmd;
+	if ($need_virtualenv) {
+		$virtualenv_cmd = findprog("virtualenv-3");
+		$virtualenv_cmd = findprog("virtualenv-3.5") if (!$virtualenv_cmd);
+		if (!$virtualenv_cmd) {
+			check_program("virtualenv", 0);
+			$virtualenv_cmd = "virtualenv";
+		}
+	}
 
 	# Check for needed programs/tools
 	check_perl_module("Pod::Usage", 0);
@@ -681,46 +767,81 @@ sub check_needs()
 	check_program("rsvg-convert", 2) if ($pdf);
 	check_program("latexmk", 2) if ($pdf);
 
+	if ($need_sphinx || $rec_sphinx_upgrade) {
+		check_python_module("ensurepip", 0) if ($need_venv);
+	}
+
+	# Do distro-specific checks and output distro-install commands
 	check_distros();
 
+	if (!$python_cmd) {
+		if ($need == 1) {
+			die "Can't build as $need mandatory dependency is missing";
+		} elsif ($need) {
+			die "Can't build as $need mandatory dependencies are missing";
+		}
+	}
+
+	# Check if sphinx-build is called sphinx-build-3
 	if ($need_symlink) {
 		printf "\tsudo ln -sf %s /usr/bin/sphinx-build\n\n",
 		       which("sphinx-build-3");
 	}
+
+	# NOTE: if the system has a too old Sphinx version installed,
+	# it will recommend installing a newer version using virtualenv
+
 	if ($need_sphinx || $rec_sphinx_upgrade) {
 		my $min_activate = "$ENV{'PWD'}/${virtenv_prefix}${min_version}/bin/activate";
 		my @activates = glob "$ENV{'PWD'}/${virtenv_prefix}*/bin/activate";
 
+		if ($cur_version lt $rec_version) {
+			print "Warning: It is recommended at least Sphinx version $rec_version.\n";
+			print "         If you want pdf, you need at least $min_pdf_version.\n";
+		}
+		if ($cur_version lt $min_pdf_version) {
+			print "Note: It is recommended at least Sphinx version $min_pdf_version if you need PDF support.\n";
+		}
 		@activates = sort {$b cmp $a} @activates;
-
-		if ($need_sphinx && scalar @activates > 0 && $activates[0] ge $min_activate) {
-			printf "\nNeed to activate a compatible Sphinx version on virtualenv with:\n";
-			printf "\t. $activates[0]\n";
-			deactivate_help();
-			exit (1);
-		} else {
-			my $rec_activate = "$virtenv_dir/bin/activate";
-			my $virtualenv = findprog("virtualenv-3");
-			my $rec_python3 = "";
-			$virtualenv = findprog("virtualenv-3.5") if (!$virtualenv);
-			$virtualenv = findprog("virtualenv") if (!$virtualenv);
-			$virtualenv = "virtualenv" if (!$virtualenv);
-
-			my $rel = "";
-			if (index($system_release, "Ubuntu") != -1) {
-				$rel = $1 if ($system_release =~ /Ubuntu\s+(\d+)[.]/);
-				if ($rel && $rel >= 16) {
-					$rec_python3 = " -p python3";
-				}
+		my ($activate, $ver);
+		foreach my $f (@activates) {
+			next if ($f lt $min_activate);
+
+			my $sphinx_cmd = $f;
+			$sphinx_cmd =~ s/activate/sphinx-build/;
+			next if (! -f $sphinx_cmd);
+
+			$ver = get_sphinx_version($sphinx_cmd);
+			if ($need_sphinx && ($ver ge $min_version)) {
+				$activate = $f;
+				last;
+			} elsif ($ver gt $cur_version) {
+				$activate = $f;
+				last;
 			}
-			if (index($system_release, "Debian") != -1) {
-				$rel = $1 if ($system_release =~ /Debian\s+(\d+)/);
-				if ($rel && $rel >= 7) {
-					$rec_python3 = " -p python3";
-				}
+		}
+		if ($activate ne "") {
+			if ($need_sphinx) {
+				printf "\nNeed to activate Sphinx (version $ver) on virtualenv with:\n";
+				printf "\t. $activate\n";
+				deactivate_help();
+				exit (1);
+			} else {
+				printf "\nYou may also use a newer Sphinx (version $ver) with:\n";
+				printf "\tdeactivate && . $activate\n";
 			}
+		} else {
+			my $rec_activate = "$virtenv_dir/bin/activate";
+
+			print "To upgrade Sphinx, use:\n\n" if ($rec_sphinx_upgrade);
+
+			$python_cmd = find_python_no_venv();
 
-			printf "\t$virtualenv$rec_python3 $virtenv_dir\n";
+			if ($need_venv) {
+				printf "\t$python_cmd -m venv $virtenv_dir\n";
+			} else {
+				printf "\t$virtualenv_cmd $virtenv_dir\n";
+			}
 			printf "\t. $rec_activate\n";
 			printf "\tpip install -r $requirement_file\n";
 			deactivate_help();
@@ -780,6 +901,24 @@ $system_release = catcheck("/etc/system-release") if !$system_release;
 $system_release = catcheck("/etc/redhat-release") if !$system_release;
 $system_release = catcheck("/etc/lsb-release") if !$system_release;
 $system_release = catcheck("/etc/gentoo-release") if !$system_release;
+
+# This seems more common than LSB these days
+if (!$system_release) {
+	my %os_var;
+	if (open IN, "cat /etc/os-release|") {
+		while (<IN>) {
+			if (m/^([\w\d\_]+)=\"?([^\"]*)\"?\n/) {
+				$os_var{$1}=$2;
+			}
+		}
+		$system_release = $os_var{"NAME"};
+		if (defined($os_var{"VERSION_ID"})) {
+			$system_release .= " " . $os_var{"VERSION_ID"} if (defined($os_var{"VERSION_ID"}));
+		} else {
+			$system_release .= " " . $os_var{"VERSION"};
+		}
+	}
+}
 $system_release = catcheck("/etc/issue") if !$system_release;
 $system_release =~ s/\s+$//;
 
diff --git a/scripts/x86-check-compiler.sh b/scripts/x86-check-compiler.sh
new file mode 100755
index 000000000000..b2b5b54b6939
--- /dev/null
+++ b/scripts/x86-check-compiler.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Check whether the compiler tail-call optimizes across an asm() statement.
+# Fail the build if it does.
+
+echo "int foo(int a); int bar(int a) { int r = foo(a); asm(\"\"); return r; }" |\
+	     $* -O2 -x c -c -S - -o - 2>/dev/null |\
+	     grep -E "^[[:blank:]]+jmp[[:blank:]]+.*"
diff --git a/security/Makefile b/security/Makefile
index 22e73a3482bd..3baf435de541 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -30,7 +30,7 @@ obj-$(CONFIG_SECURITY_YAMA)		+= yama/
 obj-$(CONFIG_SECURITY_LOADPIN)		+= loadpin/
 obj-$(CONFIG_SECURITY_SAFESETID)       += safesetid/
 obj-$(CONFIG_SECURITY_LOCKDOWN_LSM)	+= lockdown/
-obj-$(CONFIG_CGROUP_DEVICE)		+= device_cgroup.o
+obj-$(CONFIG_CGROUPS)			+= device_cgroup.o
 obj-$(CONFIG_BPF_LSM)			+= bpf/
 
 # Object integrity file lists
diff --git a/security/apparmor/apparmorfs.c b/security/apparmor/apparmorfs.c
index 280741fc0f5f..76530fc9a8d9 100644
--- a/security/apparmor/apparmorfs.c
+++ b/security/apparmor/apparmorfs.c
@@ -340,38 +340,6 @@ static struct dentry *aafs_create_dir(const char *name, struct dentry *parent)
 			   NULL);
 }
 
-/**
- * aafs_create_symlink - create a symlink in the apparmorfs filesystem
- * @name: name of dentry to create
- * @parent: parent directory for this dentry
- * @target: if symlink, symlink target string
- * @private: private data
- * @iops: struct of inode_operations that should be used
- *
- * If @target parameter is %NULL, then the @iops parameter needs to be
- * setup to handle .readlink and .get_link inode_operations.
- */
-static struct dentry *aafs_create_symlink(const char *name,
-					  struct dentry *parent,
-					  const char *target,
-					  void *private,
-					  const struct inode_operations *iops)
-{
-	struct dentry *dent;
-	char *link = NULL;
-
-	if (target) {
-		if (!link)
-			return ERR_PTR(-ENOMEM);
-	}
-	dent = aafs_create(name, S_IFLNK | 0444, parent, private, link, NULL,
-			   iops);
-	if (IS_ERR(dent))
-		kfree(link);
-
-	return dent;
-}
-
 /**
  * aafs_remove - removes a file or directory from the apparmorfs filesystem
  *
@@ -623,7 +591,7 @@ static __poll_t ns_revision_poll(struct file *file, poll_table *pt)
 
 void __aa_bump_ns_revision(struct aa_ns *ns)
 {
-	WRITE_ONCE(ns->revision, ns->revision + 1);
+	WRITE_ONCE(ns->revision, READ_ONCE(ns->revision) + 1);
 	wake_up_interruptible(&ns->wait);
 }
 
@@ -839,7 +807,7 @@ static ssize_t query_label(char *buf, size_t buf_len,
 struct multi_transaction {
 	struct kref count;
 	ssize_t size;
-	char data[0];
+	char data[];
 };
 
 #define MULTI_TRANSACTION_LIMIT (PAGE_SIZE - sizeof(struct multi_transaction))
@@ -1762,25 +1730,25 @@ int __aafs_profile_mkdir(struct aa_profile *profile, struct dentry *parent)
 	}
 
 	if (profile->rawdata) {
-		dent = aafs_create_symlink("raw_sha1", dir, NULL,
-					   profile->label.proxy,
-					   &rawdata_link_sha1_iops);
+		dent = aafs_create("raw_sha1", S_IFLNK | 0444, dir,
+				   profile->label.proxy, NULL, NULL,
+				   &rawdata_link_sha1_iops);
 		if (IS_ERR(dent))
 			goto fail;
 		aa_get_proxy(profile->label.proxy);
 		profile->dents[AAFS_PROF_RAW_HASH] = dent;
 
-		dent = aafs_create_symlink("raw_abi", dir, NULL,
-					   profile->label.proxy,
-					   &rawdata_link_abi_iops);
+		dent = aafs_create("raw_abi", S_IFLNK | 0444, dir,
+				   profile->label.proxy, NULL, NULL,
+				   &rawdata_link_abi_iops);
 		if (IS_ERR(dent))
 			goto fail;
 		aa_get_proxy(profile->label.proxy);
 		profile->dents[AAFS_PROF_RAW_ABI] = dent;
 
-		dent = aafs_create_symlink("raw_data", dir, NULL,
-					   profile->label.proxy,
-					   &rawdata_link_data_iops);
+		dent = aafs_create("raw_data", S_IFLNK | 0444, dir,
+				   profile->label.proxy, NULL, NULL,
+				   &rawdata_link_data_iops);
 		if (IS_ERR(dent))
 			goto fail;
 		aa_get_proxy(profile->label.proxy);
@@ -2363,6 +2331,8 @@ static struct aa_sfs_entry aa_sfs_entry_versions[] = {
 static struct aa_sfs_entry aa_sfs_entry_policy[] = {
 	AA_SFS_DIR("versions",			aa_sfs_entry_versions),
 	AA_SFS_FILE_BOOLEAN("set_load",		1),
+	/* number of out of band transitions supported */
+	AA_SFS_FILE_U64("outofband",		MAX_OOB_SUPPORTED),
 	{ }
 };
 
diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c
index 6ceb74e0f789..0926553ca86f 100644
--- a/security/apparmor/domain.c
+++ b/security/apparmor/domain.c
@@ -320,8 +320,7 @@ static int aa_xattrs_match(const struct linux_binprm *bprm,
 	might_sleep();
 
 	/* transition from exec match to xattr set */
-	state = aa_dfa_null_transition(profile->xmatch, state);
-
+	state = aa_dfa_outofband_transition(profile->xmatch, state);
 	d = bprm->file->f_path.dentry;
 
 	for (i = 0; i < profile->xattr_count; i++) {
@@ -330,7 +329,13 @@ static int aa_xattrs_match(const struct linux_binprm *bprm,
 		if (size >= 0) {
 			u32 perm;
 
-			/* Check the xattr value, not just presence */
+			/*
+			 * Check the xattr presence before value. This ensure
+			 * that not present xattr can be distinguished from a 0
+			 * length value or rule that matches any value
+			 */
+			state = aa_dfa_null_transition(profile->xmatch, state);
+			/* Check xattr value */
 			state = aa_dfa_match_len(profile->xmatch, state, value,
 						 size);
 			perm = dfa_user_allow(profile->xmatch, state);
@@ -340,7 +345,7 @@ static int aa_xattrs_match(const struct linux_binprm *bprm,
 			}
 		}
 		/* transition to next element */
-		state = aa_dfa_null_transition(profile->xmatch, state);
+		state = aa_dfa_outofband_transition(profile->xmatch, state);
 		if (size < 0) {
 			/*
 			 * No xattr match, so verify if transition to
@@ -620,8 +625,6 @@ static struct aa_label *profile_transition(struct aa_profile *profile,
 					   bool *secure_exec)
 {
 	struct aa_label *new = NULL;
-	struct aa_profile *component;
-	struct label_it i;
 	const char *info = NULL, *name = NULL, *target = NULL;
 	unsigned int state = profile->file.start;
 	struct aa_perms perms = {};
@@ -670,21 +673,6 @@ static struct aa_label *profile_transition(struct aa_profile *profile,
 			info = "profile transition not found";
 			/* remove MAY_EXEC to audit as failure */
 			perms.allow &= ~MAY_EXEC;
-		} else {
-			/* verify that each component's xattr requirements are
-			 * met, and fail execution otherwise
-			 */
-			label_for_each(i, new, component) {
-				if (aa_xattrs_match(bprm, component, state) <
-				    0) {
-					error = -EACCES;
-					info = "required xattrs not present";
-					perms.allow &= ~MAY_EXEC;
-					aa_put_label(new);
-					new = NULL;
-					goto audit;
-				}
-			}
 		}
 	} else if (COMPLAIN_MODE(profile)) {
 		/* no exec permission - learning mode */
@@ -929,7 +917,8 @@ int apparmor_bprm_set_creds(struct linux_binprm *bprm)
 	 * aways results in a further reduction of permissions.
 	 */
 	if ((bprm->unsafe & LSM_UNSAFE_NO_NEW_PRIVS) &&
-	    !unconfined(label) && !aa_label_is_subset(new, ctx->nnp)) {
+	    !unconfined(label) &&
+	    !aa_label_is_unconfined_subset(new, ctx->nnp)) {
 		error = -EPERM;
 		info = "no new privs";
 		goto audit;
@@ -1207,7 +1196,7 @@ int aa_change_hat(const char *hats[], int count, u64 token, int flags)
 		 * reduce restrictions.
 		 */
 		if (task_no_new_privs(current) && !unconfined(label) &&
-		    !aa_label_is_subset(new, ctx->nnp)) {
+		    !aa_label_is_unconfined_subset(new, ctx->nnp)) {
 			/* not an apparmor denial per se, so don't log it */
 			AA_DEBUG("no_new_privs - change_hat denied");
 			error = -EPERM;
@@ -1228,7 +1217,7 @@ int aa_change_hat(const char *hats[], int count, u64 token, int flags)
 		 * reduce restrictions.
 		 */
 		if (task_no_new_privs(current) && !unconfined(label) &&
-		    !aa_label_is_subset(previous, ctx->nnp)) {
+		    !aa_label_is_unconfined_subset(previous, ctx->nnp)) {
 			/* not an apparmor denial per se, so don't log it */
 			AA_DEBUG("no_new_privs - change_hat denied");
 			error = -EPERM;
@@ -1424,7 +1413,7 @@ int aa_change_profile(const char *fqname, int flags)
 		 * reduce restrictions.
 		 */
 		if (task_no_new_privs(current) && !unconfined(label) &&
-		    !aa_label_is_subset(new, ctx->nnp)) {
+		    !aa_label_is_unconfined_subset(new, ctx->nnp)) {
 			/* not an apparmor denial per se, so don't log it */
 			AA_DEBUG("no_new_privs - change_hat denied");
 			error = -EPERM;
diff --git a/security/apparmor/include/label.h b/security/apparmor/include/label.h
index 47942c4ba7ca..255764ab06e2 100644
--- a/security/apparmor/include/label.h
+++ b/security/apparmor/include/label.h
@@ -281,6 +281,7 @@ bool aa_label_init(struct aa_label *label, int size, gfp_t gfp);
 struct aa_label *aa_label_alloc(int size, struct aa_proxy *proxy, gfp_t gfp);
 
 bool aa_label_is_subset(struct aa_label *set, struct aa_label *sub);
+bool aa_label_is_unconfined_subset(struct aa_label *set, struct aa_label *sub);
 struct aa_profile *__aa_label_next_not_in_set(struct label_it *I,
 					     struct aa_label *set,
 					     struct aa_label *sub);
diff --git a/security/apparmor/include/match.h b/security/apparmor/include/match.h
index e23f4aadc1ff..884489590588 100644
--- a/security/apparmor/include/match.h
+++ b/security/apparmor/include/match.h
@@ -37,6 +37,10 @@
 
 #define YYTH_MAGIC	0x1B5E783D
 #define YYTH_FLAG_DIFF_ENCODE	1
+#define YYTH_FLAG_OOB_TRANS	2
+#define YYTH_FLAGS (YYTH_FLAG_DIFF_ENCODE | YYTH_FLAG_OOB_TRANS)
+
+#define MAX_OOB_SUPPORTED	1
 
 struct table_set_header {
 	u32 th_magic;		/* YYTH_MAGIC */
@@ -94,6 +98,7 @@ struct table_header {
 struct aa_dfa {
 	struct kref count;
 	u16 flags;
+	u32 max_oob;
 	struct table_header *tables[YYTD_ID_TSIZE];
 };
 
@@ -127,6 +132,8 @@ unsigned int aa_dfa_match(struct aa_dfa *dfa, unsigned int start,
 			  const char *str);
 unsigned int aa_dfa_next(struct aa_dfa *dfa, unsigned int state,
 			 const char c);
+unsigned int aa_dfa_outofband_transition(struct aa_dfa *dfa,
+					 unsigned int state);
 unsigned int aa_dfa_match_until(struct aa_dfa *dfa, unsigned int start,
 				const char *str, const char **retpos);
 unsigned int aa_dfa_matchn_until(struct aa_dfa *dfa, unsigned int start,
@@ -181,5 +188,9 @@ static inline void aa_put_dfa(struct aa_dfa *dfa)
 
 #define MATCH_FLAG_DIFF_ENCODE 0x80000000
 #define MARK_DIFF_ENCODE 0x40000000
+#define MATCH_FLAG_OOB_TRANSITION 0x20000000
+#define MATCH_FLAGS_MASK 0xff000000
+#define MATCH_FLAGS_VALID (MATCH_FLAG_DIFF_ENCODE | MATCH_FLAG_OOB_TRANSITION)
+#define MATCH_FLAGS_INVALID (MATCH_FLAGS_MASK & ~MATCH_FLAGS_VALID)
 
 #endif /* __AA_MATCH_H */
diff --git a/security/apparmor/label.c b/security/apparmor/label.c
index 470693239e64..ba3987242282 100644
--- a/security/apparmor/label.c
+++ b/security/apparmor/label.c
@@ -550,6 +550,39 @@ bool aa_label_is_subset(struct aa_label *set, struct aa_label *sub)
 	return __aa_label_next_not_in_set(&i, set, sub) == NULL;
 }
 
+/**
+ * aa_label_is_unconfined_subset - test if @sub is a subset of @set
+ * @set: label to test against
+ * @sub: label to test if is subset of @set
+ *
+ * This checks for subset but taking into account unconfined. IF
+ * @sub contains an unconfined profile that does not have a matching
+ * unconfined in @set then this will not cause the test to fail.
+ * Conversely we don't care about an unconfined in @set that is not in
+ * @sub
+ *
+ * Returns: true if @sub is special_subset of @set
+ *     else false
+ */
+bool aa_label_is_unconfined_subset(struct aa_label *set, struct aa_label *sub)
+{
+	struct label_it i = { };
+	struct aa_profile *p;
+
+	AA_BUG(!set);
+	AA_BUG(!sub);
+
+	if (sub == set)
+		return true;
+
+	do {
+		p = __aa_label_next_not_in_set(&i, set, sub);
+		if (p && !profile_unconfined(p))
+			break;
+	} while (p);
+
+	return p == NULL;
+}
 
 
 /**
@@ -1749,13 +1782,13 @@ void aa_label_seq_xprint(struct seq_file *f, struct aa_ns *ns,
 			AA_DEBUG("label print error");
 			return;
 		}
-		seq_printf(f, "%s", str);
+		seq_puts(f, str);
 		kfree(str);
 	} else if (display_mode(ns, label, flags))
 		seq_printf(f, "%s (%s)", label->hname,
 			   label_modename(ns, label, flags));
 	else
-		seq_printf(f, "%s", label->hname);
+		seq_puts(f, label->hname);
 }
 
 void aa_label_xprintk(struct aa_ns *ns, struct aa_label *label, int flags,
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index b621ad74f54a..27e371b44dad 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -1696,7 +1696,7 @@ static int __init alloc_buffers(void)
 
 #ifdef CONFIG_SYSCTL
 static int apparmor_dointvec(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp, loff_t *ppos)
+			     void *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (!policy_admin_capable(NULL))
 		return -EPERM;
diff --git a/security/apparmor/match.c b/security/apparmor/match.c
index 525ce22dc0e9..e605b7d53fb4 100644
--- a/security/apparmor/match.c
+++ b/security/apparmor/match.c
@@ -202,6 +202,26 @@ static int verify_dfa(struct aa_dfa *dfa)
 		if (!(BASE_TABLE(dfa)[i] & MATCH_FLAG_DIFF_ENCODE) &&
 		    (DEFAULT_TABLE(dfa)[i] >= state_count))
 			goto out;
+		if (BASE_TABLE(dfa)[i] & MATCH_FLAGS_INVALID) {
+			pr_err("AppArmor DFA state with invalid match flags");
+			goto out;
+		}
+		if ((BASE_TABLE(dfa)[i] & MATCH_FLAG_DIFF_ENCODE)) {
+			if (!(dfa->flags & YYTH_FLAG_DIFF_ENCODE)) {
+				pr_err("AppArmor DFA diff encoded transition state without header flag");
+				goto out;
+			}
+		}
+		if ((BASE_TABLE(dfa)[i] & MATCH_FLAG_OOB_TRANSITION)) {
+			if (base_idx(BASE_TABLE(dfa)[i]) < dfa->max_oob) {
+				pr_err("AppArmor DFA out of bad transition out of range");
+				goto out;
+			}
+			if (!(dfa->flags & YYTH_FLAG_OOB_TRANS)) {
+				pr_err("AppArmor DFA out of bad transition state without header flag");
+				goto out;
+			}
+		}
 		if (base_idx(BASE_TABLE(dfa)[i]) + 255 >= trans_count) {
 			pr_err("AppArmor DFA next/check upper bounds error\n");
 			goto out;
@@ -304,9 +324,23 @@ struct aa_dfa *aa_dfa_unpack(void *blob, size_t size, int flags)
 		goto fail;
 
 	dfa->flags = ntohs(*(__be16 *) (data + 12));
-	if (dfa->flags != 0 && dfa->flags != YYTH_FLAG_DIFF_ENCODE)
+	if (dfa->flags & ~(YYTH_FLAGS))
 		goto fail;
 
+	/*
+	 * TODO: needed for dfa to support more than 1 oob
+	 * if (dfa->flags & YYTH_FLAGS_OOB_TRANS) {
+	 *	if (hsize < 16 + 4)
+	 *		goto fail;
+	 *	dfa->max_oob = ntol(*(__be32 *) (data + 16));
+	 *	if (dfa->max <= MAX_OOB_SUPPORTED) {
+	 *		pr_err("AppArmor DFA OOB greater than supported\n");
+	 *		goto fail;
+	 *	}
+	 * }
+	 */
+	dfa->max_oob = 1;
+
 	data += hsize;
 	size -= hsize;
 
@@ -495,6 +529,23 @@ unsigned int aa_dfa_next(struct aa_dfa *dfa, unsigned int state,
 	return state;
 }
 
+unsigned int aa_dfa_outofband_transition(struct aa_dfa *dfa, unsigned int state)
+{
+	u16 *def = DEFAULT_TABLE(dfa);
+	u32 *base = BASE_TABLE(dfa);
+	u16 *next = NEXT_TABLE(dfa);
+	u16 *check = CHECK_TABLE(dfa);
+	u32 b = (base)[(state)];
+
+	if (!(b & MATCH_FLAG_OOB_TRANSITION))
+		return DFA_NOMATCH;
+
+	/* No Equivalence class remapping for outofband transitions */
+	match_char(state, def, base, next, check, -1);
+
+	return state;
+}
+
 /**
  * aa_dfa_match_until - traverse @dfa until accept state or end of input
  * @dfa: the dfa to match @str against  (NOT NULL)
diff --git a/security/apparmor/path.c b/security/apparmor/path.c
index c6da542de27b..b02dfdbff7cd 100644
--- a/security/apparmor/path.c
+++ b/security/apparmor/path.c
@@ -142,7 +142,7 @@ static int d_namespace_path(const struct path *path, char *buf, char **name,
 			error = PTR_ERR(res);
 			*name = buf;
 			goto out;
-		};
+		}
 	} else if (!our_mnt(path->mnt))
 		connected = 0;
 
diff --git a/security/apparmor/policy_unpack.c b/security/apparmor/policy_unpack.c
index 2d743c004bc4..2dfe0781b0a4 100644
--- a/security/apparmor/policy_unpack.c
+++ b/security/apparmor/policy_unpack.c
@@ -748,10 +748,14 @@ static struct aa_profile *unpack_profile(struct aa_ext *e, char **ns_name)
 		goto fail;
 	if (tmp == PACKED_MODE_COMPLAIN || (e->version & FORCE_COMPLAIN_FLAG))
 		profile->mode = APPARMOR_COMPLAIN;
+	else if (tmp == PACKED_MODE_ENFORCE)
+		profile->mode = APPARMOR_ENFORCE;
 	else if (tmp == PACKED_MODE_KILL)
 		profile->mode = APPARMOR_KILL;
 	else if (tmp == PACKED_MODE_UNCONFINED)
 		profile->mode = APPARMOR_UNCONFINED;
+	else
+		goto fail;
 	if (!unpack_u32(e, &tmp, NULL))
 		goto fail;
 	if (tmp)
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 7d0f8f7431ff..43ab0ad45c1b 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -15,6 +15,8 @@
 #include <linux/rcupdate.h>
 #include <linux/mutex.h>
 
+#ifdef CONFIG_CGROUP_DEVICE
+
 static DEFINE_MUTEX(devcgroup_mutex);
 
 enum devcg_behavior {
@@ -792,7 +794,7 @@ struct cgroup_subsys devices_cgrp_subsys = {
 };
 
 /**
- * __devcgroup_check_permission - checks if an inode operation is permitted
+ * devcgroup_legacy_check_permission - checks if an inode operation is permitted
  * @dev_cgroup: the dev cgroup to be tested against
  * @type: device type
  * @major: device major number
@@ -801,7 +803,7 @@ struct cgroup_subsys devices_cgrp_subsys = {
  *
  * returns 0 on success, -EPERM case the operation is not permitted
  */
-static int __devcgroup_check_permission(short type, u32 major, u32 minor,
+static int devcgroup_legacy_check_permission(short type, u32 major, u32 minor,
 					short access)
 {
 	struct dev_cgroup *dev_cgroup;
@@ -825,6 +827,10 @@ static int __devcgroup_check_permission(short type, u32 major, u32 minor,
 	return 0;
 }
 
+#endif /* CONFIG_CGROUP_DEVICE */
+
+#if defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF)
+
 int devcgroup_check_permission(short type, u32 major, u32 minor, short access)
 {
 	int rc = BPF_CGROUP_RUN_PROG_DEVICE_CGROUP(type, major, minor, access);
@@ -832,6 +838,13 @@ int devcgroup_check_permission(short type, u32 major, u32 minor, short access)
 	if (rc)
 		return -EPERM;
 
-	return __devcgroup_check_permission(type, major, minor, access);
+	#ifdef CONFIG_CGROUP_DEVICE
+	return devcgroup_legacy_check_permission(type, major, minor, access);
+
+	#else /* CONFIG_CGROUP_DEVICE */
+	return 0;
+
+	#endif /* CONFIG_CGROUP_DEVICE */
 }
 EXPORT_SYMBOL(devcgroup_check_permission);
+#endif /* defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF) */
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index 64317d95363e..877f9bc43a74 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -45,11 +45,16 @@ enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8 };
 #define IMA_TEMPLATE_IMA_NAME "ima"
 #define IMA_TEMPLATE_IMA_FMT "d|n"
 
+#define NR_BANKS(chip) ((chip != NULL) ? chip->nr_allocated_banks : 0)
+
 /* current content of the policy */
 extern int ima_policy_flag;
 
 /* set during initialization */
 extern int ima_hash_algo;
+extern int ima_sha1_idx __ro_after_init;
+extern int ima_hash_algo_idx __ro_after_init;
+extern int ima_extra_slots __ro_after_init;
 extern int ima_appraise;
 extern struct tpm_chip *ima_tpm_chip;
 
@@ -92,10 +97,10 @@ struct ima_template_desc {
 
 struct ima_template_entry {
 	int pcr;
-	u8 digest[TPM_DIGEST_SIZE];	/* sha1 or md5 measurement hash */
+	struct tpm_digest *digests;
 	struct ima_template_desc *template_desc; /* template descriptor */
 	u32 template_data_len;
-	struct ima_field_data template_data[0];	/* template related data */
+	struct ima_field_data template_data[];	/* template related data */
 };
 
 struct ima_queue_entry {
@@ -138,8 +143,7 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash);
 int ima_calc_buffer_hash(const void *buf, loff_t len,
 			 struct ima_digest_data *hash);
 int ima_calc_field_array_hash(struct ima_field_data *field_data,
-			      struct ima_template_desc *desc, int num_fields,
-			      struct ima_digest_data *hash);
+			      struct ima_template_entry *entry);
 int __init ima_calc_boot_aggregate(struct ima_digest_data *hash);
 void ima_add_violation(struct file *file, const unsigned char *filename,
 		       struct integrity_iint_cache *iint,
diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c
index f6bc00914aa5..78e0b0a7723e 100644
--- a/security/integrity/ima/ima_api.c
+++ b/security/integrity/ima/ima_api.c
@@ -27,6 +27,7 @@ void ima_free_template_entry(struct ima_template_entry *entry)
 	for (i = 0; i < entry->template_desc->num_fields; i++)
 		kfree(entry->template_data[i].data);
 
+	kfree(entry->digests);
 	kfree(entry);
 }
 
@@ -38,6 +39,7 @@ int ima_alloc_init_template(struct ima_event_data *event_data,
 			    struct ima_template_desc *desc)
 {
 	struct ima_template_desc *template_desc;
+	struct tpm_digest *digests;
 	int i, result = 0;
 
 	if (desc)
@@ -50,6 +52,14 @@ int ima_alloc_init_template(struct ima_event_data *event_data,
 	if (!*entry)
 		return -ENOMEM;
 
+	digests = kcalloc(NR_BANKS(ima_tpm_chip) + ima_extra_slots,
+			  sizeof(*digests), GFP_NOFS);
+	if (!digests) {
+		result = -ENOMEM;
+		goto out;
+	}
+
+	(*entry)->digests = digests;
 	(*entry)->template_desc = template_desc;
 	for (i = 0; i < template_desc->num_fields; i++) {
 		const struct ima_template_field *field =
@@ -96,26 +106,16 @@ int ima_store_template(struct ima_template_entry *entry,
 	static const char audit_cause[] = "hashing_error";
 	char *template_name = entry->template_desc->name;
 	int result;
-	struct {
-		struct ima_digest_data hdr;
-		char digest[TPM_DIGEST_SIZE];
-	} hash;
 
 	if (!violation) {
-		int num_fields = entry->template_desc->num_fields;
-
-		/* this function uses default algo */
-		hash.hdr.algo = HASH_ALGO_SHA1;
 		result = ima_calc_field_array_hash(&entry->template_data[0],
-						   entry->template_desc,
-						   num_fields, &hash.hdr);
+						   entry);
 		if (result < 0) {
 			integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
 					    template_name, op,
 					    audit_cause, result, 0);
 			return result;
 		}
-		memcpy(entry->digest, hash.hdr.digest, hash.hdr.length);
 	}
 	entry->pcr = pcr;
 	result = ima_add_template_entry(entry, violation, op, inode, filename);
diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index 423c84f95a14..5201f5ec2ce4 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -57,7 +57,22 @@ MODULE_PARM_DESC(ahash_bufsize, "Maximum ahash buffer size");
 static struct crypto_shash *ima_shash_tfm;
 static struct crypto_ahash *ima_ahash_tfm;
 
-int __init ima_init_crypto(void)
+struct ima_algo_desc {
+	struct crypto_shash *tfm;
+	enum hash_algo algo;
+};
+
+int ima_sha1_idx __ro_after_init;
+int ima_hash_algo_idx __ro_after_init;
+/*
+ * Additional number of slots reserved, as needed, for SHA1
+ * and IMA default algo.
+ */
+int ima_extra_slots __ro_after_init;
+
+static struct ima_algo_desc *ima_algo_array;
+
+static int __init ima_init_ima_crypto(void)
 {
 	long rc;
 
@@ -76,26 +91,137 @@ int __init ima_init_crypto(void)
 static struct crypto_shash *ima_alloc_tfm(enum hash_algo algo)
 {
 	struct crypto_shash *tfm = ima_shash_tfm;
-	int rc;
+	int rc, i;
 
 	if (algo < 0 || algo >= HASH_ALGO__LAST)
 		algo = ima_hash_algo;
 
-	if (algo != ima_hash_algo) {
-		tfm = crypto_alloc_shash(hash_algo_name[algo], 0, 0);
-		if (IS_ERR(tfm)) {
-			rc = PTR_ERR(tfm);
-			pr_err("Can not allocate %s (reason: %d)\n",
-			       hash_algo_name[algo], rc);
-		}
+	if (algo == ima_hash_algo)
+		return tfm;
+
+	for (i = 0; i < NR_BANKS(ima_tpm_chip) + ima_extra_slots; i++)
+		if (ima_algo_array[i].tfm && ima_algo_array[i].algo == algo)
+			return ima_algo_array[i].tfm;
+
+	tfm = crypto_alloc_shash(hash_algo_name[algo], 0, 0);
+	if (IS_ERR(tfm)) {
+		rc = PTR_ERR(tfm);
+		pr_err("Can not allocate %s (reason: %d)\n",
+		       hash_algo_name[algo], rc);
 	}
 	return tfm;
 }
 
+int __init ima_init_crypto(void)
+{
+	enum hash_algo algo;
+	long rc;
+	int i;
+
+	rc = ima_init_ima_crypto();
+	if (rc)
+		return rc;
+
+	ima_sha1_idx = -1;
+	ima_hash_algo_idx = -1;
+
+	for (i = 0; i < NR_BANKS(ima_tpm_chip); i++) {
+		algo = ima_tpm_chip->allocated_banks[i].crypto_id;
+		if (algo == HASH_ALGO_SHA1)
+			ima_sha1_idx = i;
+
+		if (algo == ima_hash_algo)
+			ima_hash_algo_idx = i;
+	}
+
+	if (ima_sha1_idx < 0) {
+		ima_sha1_idx = NR_BANKS(ima_tpm_chip) + ima_extra_slots++;
+		if (ima_hash_algo == HASH_ALGO_SHA1)
+			ima_hash_algo_idx = ima_sha1_idx;
+	}
+
+	if (ima_hash_algo_idx < 0)
+		ima_hash_algo_idx = NR_BANKS(ima_tpm_chip) + ima_extra_slots++;
+
+	ima_algo_array = kcalloc(NR_BANKS(ima_tpm_chip) + ima_extra_slots,
+				 sizeof(*ima_algo_array), GFP_KERNEL);
+	if (!ima_algo_array) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < NR_BANKS(ima_tpm_chip); i++) {
+		algo = ima_tpm_chip->allocated_banks[i].crypto_id;
+		ima_algo_array[i].algo = algo;
+
+		/* unknown TPM algorithm */
+		if (algo == HASH_ALGO__LAST)
+			continue;
+
+		if (algo == ima_hash_algo) {
+			ima_algo_array[i].tfm = ima_shash_tfm;
+			continue;
+		}
+
+		ima_algo_array[i].tfm = ima_alloc_tfm(algo);
+		if (IS_ERR(ima_algo_array[i].tfm)) {
+			if (algo == HASH_ALGO_SHA1) {
+				rc = PTR_ERR(ima_algo_array[i].tfm);
+				ima_algo_array[i].tfm = NULL;
+				goto out_array;
+			}
+
+			ima_algo_array[i].tfm = NULL;
+		}
+	}
+
+	if (ima_sha1_idx >= NR_BANKS(ima_tpm_chip)) {
+		if (ima_hash_algo == HASH_ALGO_SHA1) {
+			ima_algo_array[ima_sha1_idx].tfm = ima_shash_tfm;
+		} else {
+			ima_algo_array[ima_sha1_idx].tfm =
+						ima_alloc_tfm(HASH_ALGO_SHA1);
+			if (IS_ERR(ima_algo_array[ima_sha1_idx].tfm)) {
+				rc = PTR_ERR(ima_algo_array[ima_sha1_idx].tfm);
+				goto out_array;
+			}
+		}
+
+		ima_algo_array[ima_sha1_idx].algo = HASH_ALGO_SHA1;
+	}
+
+	if (ima_hash_algo_idx >= NR_BANKS(ima_tpm_chip) &&
+	    ima_hash_algo_idx != ima_sha1_idx) {
+		ima_algo_array[ima_hash_algo_idx].tfm = ima_shash_tfm;
+		ima_algo_array[ima_hash_algo_idx].algo = ima_hash_algo;
+	}
+
+	return 0;
+out_array:
+	for (i = 0; i < NR_BANKS(ima_tpm_chip) + ima_extra_slots; i++) {
+		if (!ima_algo_array[i].tfm ||
+		    ima_algo_array[i].tfm == ima_shash_tfm)
+			continue;
+
+		crypto_free_shash(ima_algo_array[i].tfm);
+	}
+out:
+	crypto_free_shash(ima_shash_tfm);
+	return rc;
+}
+
 static void ima_free_tfm(struct crypto_shash *tfm)
 {
-	if (tfm != ima_shash_tfm)
-		crypto_free_shash(tfm);
+	int i;
+
+	if (tfm == ima_shash_tfm)
+		return;
+
+	for (i = 0; i < NR_BANKS(ima_tpm_chip) + ima_extra_slots; i++)
+		if (ima_algo_array[i].tfm == tfm)
+			return;
+
+	crypto_free_shash(tfm);
 }
 
 /**
@@ -464,17 +590,15 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
  * Calculate the hash of template data
  */
 static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data,
-					 struct ima_template_desc *td,
-					 int num_fields,
-					 struct ima_digest_data *hash,
-					 struct crypto_shash *tfm)
+					 struct ima_template_entry *entry,
+					 int tfm_idx)
 {
-	SHASH_DESC_ON_STACK(shash, tfm);
+	SHASH_DESC_ON_STACK(shash, ima_algo_array[tfm_idx].tfm);
+	struct ima_template_desc *td = entry->template_desc;
+	int num_fields = entry->template_desc->num_fields;
 	int rc, i;
 
-	shash->tfm = tfm;
-
-	hash->length = crypto_shash_digestsize(tfm);
+	shash->tfm = ima_algo_array[tfm_idx].tfm;
 
 	rc = crypto_shash_init(shash);
 	if (rc != 0)
@@ -504,27 +628,44 @@ static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data,
 	}
 
 	if (!rc)
-		rc = crypto_shash_final(shash, hash->digest);
+		rc = crypto_shash_final(shash, entry->digests[tfm_idx].digest);
 
 	return rc;
 }
 
 int ima_calc_field_array_hash(struct ima_field_data *field_data,
-			      struct ima_template_desc *desc, int num_fields,
-			      struct ima_digest_data *hash)
+			      struct ima_template_entry *entry)
 {
-	struct crypto_shash *tfm;
-	int rc;
+	u16 alg_id;
+	int rc, i;
 
-	tfm = ima_alloc_tfm(hash->algo);
-	if (IS_ERR(tfm))
-		return PTR_ERR(tfm);
+	rc = ima_calc_field_array_hash_tfm(field_data, entry, ima_sha1_idx);
+	if (rc)
+		return rc;
 
-	rc = ima_calc_field_array_hash_tfm(field_data, desc, num_fields,
-					   hash, tfm);
+	entry->digests[ima_sha1_idx].alg_id = TPM_ALG_SHA1;
 
-	ima_free_tfm(tfm);
+	for (i = 0; i < NR_BANKS(ima_tpm_chip) + ima_extra_slots; i++) {
+		if (i == ima_sha1_idx)
+			continue;
+
+		if (i < NR_BANKS(ima_tpm_chip)) {
+			alg_id = ima_tpm_chip->allocated_banks[i].alg_id;
+			entry->digests[i].alg_id = alg_id;
+		}
+
+		/* for unmapped TPM algorithms digest is still a padded SHA1 */
+		if (!ima_algo_array[i].tfm) {
+			memcpy(entry->digests[i].digest,
+			       entry->digests[ima_sha1_idx].digest,
+			       TPM_DIGEST_SIZE);
+			continue;
+		}
 
+		rc = ima_calc_field_array_hash_tfm(field_data, entry, i);
+		if (rc)
+			return rc;
+	}
 	return rc;
 }
 
@@ -655,18 +796,29 @@ static void __init ima_pcrread(u32 idx, struct tpm_digest *d)
 }
 
 /*
- * Calculate the boot aggregate hash
+ * The boot_aggregate is a cumulative hash over TPM registers 0 - 7.  With
+ * TPM 1.2 the boot_aggregate was based on reading the SHA1 PCRs, but with
+ * TPM 2.0 hash agility, TPM chips could support multiple TPM PCR banks,
+ * allowing firmware to configure and enable different banks.
+ *
+ * Knowing which TPM bank is read to calculate the boot_aggregate digest
+ * needs to be conveyed to a verifier.  For this reason, use the same
+ * hash algorithm for reading the TPM PCRs as for calculating the boot
+ * aggregate digest as stored in the measurement list.
  */
-static int __init ima_calc_boot_aggregate_tfm(char *digest,
+static int __init ima_calc_boot_aggregate_tfm(char *digest, u16 alg_id,
 					      struct crypto_shash *tfm)
 {
-	struct tpm_digest d = { .alg_id = TPM_ALG_SHA1, .digest = {0} };
+	struct tpm_digest d = { .alg_id = alg_id, .digest = {0} };
 	int rc;
 	u32 i;
 	SHASH_DESC_ON_STACK(shash, tfm);
 
 	shash->tfm = tfm;
 
+	pr_devel("calculating the boot-aggregate based on TPM bank: %04x\n",
+		 d.alg_id);
+
 	rc = crypto_shash_init(shash);
 	if (rc != 0)
 		return rc;
@@ -675,7 +827,8 @@ static int __init ima_calc_boot_aggregate_tfm(char *digest,
 	for (i = TPM_PCR0; i < TPM_PCR8; i++) {
 		ima_pcrread(i, &d);
 		/* now accumulate with current aggregate */
-		rc = crypto_shash_update(shash, d.digest, TPM_DIGEST_SIZE);
+		rc = crypto_shash_update(shash, d.digest,
+					 crypto_shash_digestsize(tfm));
 	}
 	if (!rc)
 		crypto_shash_final(shash, digest);
@@ -685,14 +838,37 @@ static int __init ima_calc_boot_aggregate_tfm(char *digest,
 int __init ima_calc_boot_aggregate(struct ima_digest_data *hash)
 {
 	struct crypto_shash *tfm;
-	int rc;
+	u16 crypto_id, alg_id;
+	int rc, i, bank_idx = -1;
+
+	for (i = 0; i < ima_tpm_chip->nr_allocated_banks; i++) {
+		crypto_id = ima_tpm_chip->allocated_banks[i].crypto_id;
+		if (crypto_id == hash->algo) {
+			bank_idx = i;
+			break;
+		}
+
+		if (crypto_id == HASH_ALGO_SHA256)
+			bank_idx = i;
+
+		if (bank_idx == -1 && crypto_id == HASH_ALGO_SHA1)
+			bank_idx = i;
+	}
+
+	if (bank_idx == -1) {
+		pr_err("No suitable TPM algorithm for boot aggregate\n");
+		return 0;
+	}
+
+	hash->algo = ima_tpm_chip->allocated_banks[bank_idx].crypto_id;
 
 	tfm = ima_alloc_tfm(hash->algo);
 	if (IS_ERR(tfm))
 		return PTR_ERR(tfm);
 
 	hash->length = crypto_shash_digestsize(tfm);
-	rc = ima_calc_boot_aggregate_tfm(hash->digest, tfm);
+	alg_id = ima_tpm_chip->allocated_banks[bank_idx].alg_id;
+	rc = ima_calc_boot_aggregate_tfm(hash->digest, alg_id, tfm);
 
 	ima_free_tfm(tfm);
 
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index a71e822a6e92..8b030a1c5e0d 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -150,7 +150,7 @@ int ima_measurements_show(struct seq_file *m, void *v)
 	ima_putc(m, &pcr, sizeof(e->pcr));
 
 	/* 2nd: template digest */
-	ima_putc(m, e->digest, TPM_DIGEST_SIZE);
+	ima_putc(m, e->digests[ima_sha1_idx].digest, TPM_DIGEST_SIZE);
 
 	/* 3rd: template name size */
 	namelen = !ima_canonical_fmt ? strlen(template_name) :
@@ -233,7 +233,7 @@ static int ima_ascii_measurements_show(struct seq_file *m, void *v)
 	seq_printf(m, "%2d ", e->pcr);
 
 	/* 2nd: SHA1 template hash */
-	ima_print_digest(m, e->digest, TPM_DIGEST_SIZE);
+	ima_print_digest(m, e->digests[ima_sha1_idx].digest, TPM_DIGEST_SIZE);
 
 	/* 3th:  template name */
 	seq_printf(m, " %s", template_name);
diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c
index 567468188a61..fc1e1002b48d 100644
--- a/security/integrity/ima/ima_init.c
+++ b/security/integrity/ima/ima_init.c
@@ -25,7 +25,7 @@ struct tpm_chip *ima_tpm_chip;
 /* Add the boot aggregate to the IMA measurement list and extend
  * the PCR register.
  *
- * Calculate the boot aggregate, a SHA1 over tpm registers 0-7,
+ * Calculate the boot aggregate, a hash over tpm registers 0-7,
  * assuming a TPM chip exists, and zeroes if the TPM chip does not
  * exist.  Add the boot aggregate measurement to the measurement
  * list and extend the PCR register.
@@ -49,15 +49,27 @@ static int __init ima_add_boot_aggregate(void)
 	int violation = 0;
 	struct {
 		struct ima_digest_data hdr;
-		char digest[TPM_DIGEST_SIZE];
+		char digest[TPM_MAX_DIGEST_SIZE];
 	} hash;
 
 	memset(iint, 0, sizeof(*iint));
 	memset(&hash, 0, sizeof(hash));
 	iint->ima_hash = &hash.hdr;
-	iint->ima_hash->algo = HASH_ALGO_SHA1;
-	iint->ima_hash->length = SHA1_DIGEST_SIZE;
-
+	iint->ima_hash->algo = ima_hash_algo;
+	iint->ima_hash->length = hash_digest_size[ima_hash_algo];
+
+	/*
+	 * With TPM 2.0 hash agility, TPM chips could support multiple TPM
+	 * PCR banks, allowing firmware to configure and enable different
+	 * banks.  The SHA1 bank is not necessarily enabled.
+	 *
+	 * Use the same hash algorithm for reading the TPM PCRs as for
+	 * calculating the boot aggregate digest.  Preference is given to
+	 * the configured IMA default hash algorithm.  Otherwise, use the
+	 * TCG required banks - SHA256 for TPM 2.0, SHA1 for TPM 1.2.
+	 * Ultimately select SHA1 also for TPM 2.0 if the SHA256 PCR bank
+	 * is not found.
+	 */
 	if (ima_tpm_chip) {
 		result = ima_calc_boot_aggregate(&hash.hdr);
 		if (result < 0) {
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 9d0abedeae77..f96f151294e6 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -792,6 +792,9 @@ static int __init init_ima(void)
 		error = ima_init();
 	}
 
+	if (error)
+		return error;
+
 	error = register_blocking_lsm_notifier(&ima_lsm_policy_notifier);
 	if (error)
 		pr_warn("Couldn't register LSM notifier, error %d\n", error);
diff --git a/security/integrity/ima/ima_queue.c b/security/integrity/ima/ima_queue.c
index 8753212ddb18..fb4ec270f620 100644
--- a/security/integrity/ima/ima_queue.c
+++ b/security/integrity/ima/ima_queue.c
@@ -55,7 +55,8 @@ static struct ima_queue_entry *ima_lookup_digest_entry(u8 *digest_value,
 	key = ima_hash_key(digest_value);
 	rcu_read_lock();
 	hlist_for_each_entry_rcu(qe, &ima_htable.queue[key], hnext) {
-		rc = memcmp(qe->entry->digest, digest_value, TPM_DIGEST_SIZE);
+		rc = memcmp(qe->entry->digests[ima_hash_algo_idx].digest,
+			    digest_value, hash_digest_size[ima_hash_algo]);
 		if ((rc == 0) && (qe->entry->pcr == pcr)) {
 			ret = qe;
 			break;
@@ -75,7 +76,7 @@ static int get_binary_runtime_size(struct ima_template_entry *entry)
 	int size = 0;
 
 	size += sizeof(u32);	/* pcr */
-	size += sizeof(entry->digest);
+	size += TPM_DIGEST_SIZE;
 	size += sizeof(int);	/* template name size field */
 	size += strlen(entry->template_desc->name);
 	size += sizeof(entry->template_data_len);
@@ -107,7 +108,7 @@ static int ima_add_digest_entry(struct ima_template_entry *entry,
 
 	atomic_long_inc(&ima_htable.len);
 	if (update_htable) {
-		key = ima_hash_key(entry->digest);
+		key = ima_hash_key(entry->digests[ima_hash_algo_idx].digest);
 		hlist_add_head_rcu(&qe->hnext, &ima_htable.queue[key]);
 	}
 
@@ -134,18 +135,14 @@ unsigned long ima_get_binary_runtime_size(void)
 		return binary_runtime_size + sizeof(struct ima_kexec_hdr);
 };
 
-static int ima_pcr_extend(const u8 *hash, int pcr)
+static int ima_pcr_extend(struct tpm_digest *digests_arg, int pcr)
 {
 	int result = 0;
-	int i;
 
 	if (!ima_tpm_chip)
 		return result;
 
-	for (i = 0; i < ima_tpm_chip->nr_allocated_banks; i++)
-		memcpy(digests[i].digest, hash, TPM_DIGEST_SIZE);
-
-	result = tpm_pcr_extend(ima_tpm_chip, pcr, digests);
+	result = tpm_pcr_extend(ima_tpm_chip, pcr, digests_arg);
 	if (result != 0)
 		pr_err("Error Communicating to TPM chip, result: %d\n", result);
 	return result;
@@ -163,7 +160,8 @@ int ima_add_template_entry(struct ima_template_entry *entry, int violation,
 			   const char *op, struct inode *inode,
 			   const unsigned char *filename)
 {
-	u8 digest[TPM_DIGEST_SIZE];
+	u8 *digest = entry->digests[ima_hash_algo_idx].digest;
+	struct tpm_digest *digests_arg = entry->digests;
 	const char *audit_cause = "hash_added";
 	char tpm_audit_cause[AUDIT_CAUSE_LEN_MAX];
 	int audit_info = 1;
@@ -171,7 +169,6 @@ int ima_add_template_entry(struct ima_template_entry *entry, int violation,
 
 	mutex_lock(&ima_extend_list_mutex);
 	if (!violation) {
-		memcpy(digest, entry->digest, sizeof(digest));
 		if (ima_lookup_digest_entry(digest, entry->pcr)) {
 			audit_cause = "hash_exists";
 			result = -EEXIST;
@@ -187,9 +184,9 @@ int ima_add_template_entry(struct ima_template_entry *entry, int violation,
 	}
 
 	if (violation)		/* invalidate pcr */
-		memset(digest, 0xff, sizeof(digest));
+		digests_arg = digests;
 
-	tpmresult = ima_pcr_extend(digest, entry->pcr);
+	tpmresult = ima_pcr_extend(digests_arg, entry->pcr);
 	if (tpmresult != 0) {
 		snprintf(tpm_audit_cause, AUDIT_CAUSE_LEN_MAX, "TPM_error(%d)",
 			 tpmresult);
@@ -215,6 +212,8 @@ int ima_restore_measurement_entry(struct ima_template_entry *entry)
 
 int __init ima_init_digests(void)
 {
+	u16 digest_size;
+	u16 crypto_id;
 	int i;
 
 	if (!ima_tpm_chip)
@@ -225,8 +224,17 @@ int __init ima_init_digests(void)
 	if (!digests)
 		return -ENOMEM;
 
-	for (i = 0; i < ima_tpm_chip->nr_allocated_banks; i++)
+	for (i = 0; i < ima_tpm_chip->nr_allocated_banks; i++) {
 		digests[i].alg_id = ima_tpm_chip->allocated_banks[i].alg_id;
+		digest_size = ima_tpm_chip->allocated_banks[i].digest_size;
+		crypto_id = ima_tpm_chip->allocated_banks[i].crypto_id;
+
+		/* for unmapped TPM algorithms digest is still a padded SHA1 */
+		if (crypto_id == HASH_ALGO__LAST)
+			digest_size = SHA1_DIGEST_SIZE;
+
+		memset(digests[i].digest, 0xff, digest_size);
+	}
 
 	return 0;
 }
diff --git a/security/integrity/ima/ima_template.c b/security/integrity/ima/ima_template.c
index 062d9ad49afb..5a2def40a733 100644
--- a/security/integrity/ima/ima_template.c
+++ b/security/integrity/ima/ima_template.c
@@ -301,6 +301,7 @@ static int ima_restore_template_data(struct ima_template_desc *template_desc,
 				     int template_data_size,
 				     struct ima_template_entry **entry)
 {
+	struct tpm_digest *digests;
 	int ret = 0;
 	int i;
 
@@ -309,11 +310,21 @@ static int ima_restore_template_data(struct ima_template_desc *template_desc,
 	if (!*entry)
 		return -ENOMEM;
 
+	digests = kcalloc(NR_BANKS(ima_tpm_chip) + ima_extra_slots,
+			  sizeof(*digests), GFP_NOFS);
+	if (!digests) {
+		kfree(*entry);
+		return -ENOMEM;
+	}
+
+	(*entry)->digests = digests;
+
 	ret = ima_parse_buf(template_data, template_data + template_data_size,
 			    NULL, template_desc->num_fields,
 			    (*entry)->template_data, NULL, NULL,
 			    ENFORCE_FIELDS | ENFORCE_BUFEND, "template data");
 	if (ret < 0) {
+		kfree((*entry)->digests);
 		kfree(*entry);
 		return ret;
 	}
@@ -346,6 +357,7 @@ static int ima_restore_template_data(struct ima_template_desc *template_desc,
 int ima_restore_measurement_list(loff_t size, void *buf)
 {
 	char template_name[MAX_TEMPLATE_NAME_LEN];
+	unsigned char zero[TPM_DIGEST_SIZE] = { 0 };
 
 	struct ima_kexec_hdr *khdr = buf;
 	struct ima_field_data hdr[HDR__LAST] = {
@@ -445,8 +457,17 @@ int ima_restore_measurement_list(loff_t size, void *buf)
 		if (ret < 0)
 			break;
 
-		memcpy(entry->digest, hdr[HDR_DIGEST].data,
-		       hdr[HDR_DIGEST].len);
+		if (memcmp(hdr[HDR_DIGEST].data, zero, sizeof(zero))) {
+			ret = ima_calc_field_array_hash(
+						&entry->template_data[0],
+						entry);
+			if (ret < 0) {
+				pr_err("cannot calculate template digest\n");
+				ret = -EINVAL;
+				break;
+			}
+		}
+
 		entry->pcr = !ima_canonical_fmt ? *(hdr[HDR_PCR].data) :
 			     le32_to_cpu(*(hdr[HDR_PCR].data));
 		ret = ima_restore_measurement_entry(entry);
diff --git a/security/integrity/integrity.h b/security/integrity/integrity.h
index 298b73794d8b..16c1894c29bb 100644
--- a/security/integrity/integrity.h
+++ b/security/integrity/integrity.h
@@ -107,7 +107,7 @@ struct ima_digest_data {
 		} ng;
 		u8 data[2];
 	} xattr;
-	u8 digest[0];
+	u8 digest[];
 } __packed;
 
 /*
@@ -119,7 +119,7 @@ struct signature_v2_hdr {
 	uint8_t	hash_algo;	/* Digest algorithm [enum hash_algo] */
 	__be32 keyid;		/* IMA key identifier - not X509/PGP specific */
 	__be16 sig_size;	/* signature size */
-	uint8_t sig[0];		/* signature payload */
+	uint8_t sig[];		/* signature payload */
 } __packed;
 
 /* integrity data associated with an inode */
diff --git a/security/keys/Kconfig b/security/keys/Kconfig
index 47c041563d41..d4dc5ea208af 100644
--- a/security/keys/Kconfig
+++ b/security/keys/Kconfig
@@ -116,3 +116,12 @@ config KEY_DH_OPERATIONS
 	 in the kernel.
 
 	 If you are unsure as to whether this is required, answer N.
+
+config KEY_NOTIFICATIONS
+	bool "Provide key/keyring change notifications"
+	depends on KEYS && WATCH_QUEUE
+	help
+	  This option provides support for getting change notifications on keys
+	  and keyrings on which the caller has View permission.  This makes use
+	  of the /dev/watch_queue misc device to handle the notification
+	  buffer and provides KEYCTL_WATCH_KEY to enable/disable watches.
diff --git a/security/keys/compat.c b/security/keys/compat.c
index b975f8f11124..6ee9d8f6a4a5 100644
--- a/security/keys/compat.c
+++ b/security/keys/compat.c
@@ -156,6 +156,9 @@ COMPAT_SYSCALL_DEFINE5(keyctl, u32, option,
 	case KEYCTL_CAPABILITIES:
 		return keyctl_capabilities(compat_ptr(arg2), arg3);
 
+	case KEYCTL_WATCH_KEY:
+		return keyctl_watch_key(arg2, arg3, arg4);
+
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/security/keys/gc.c b/security/keys/gc.c
index 671dd730ecfc..3c90807476eb 100644
--- a/security/keys/gc.c
+++ b/security/keys/gc.c
@@ -131,6 +131,11 @@ static noinline void key_gc_unused_keys(struct list_head *keys)
 		kdebug("- %u", key->serial);
 		key_check(key);
 
+#ifdef CONFIG_KEY_NOTIFICATIONS
+		remove_watch_list(key->watchers, key->serial);
+		key->watchers = NULL;
+#endif
+
 		/* Throw away the key data if the key is instantiated */
 		if (state == KEY_IS_POSITIVE && key->type->destroy)
 			key->type->destroy(key);
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 6d0ca48ae9a5..28e17f4f3328 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -15,6 +15,7 @@
 #include <linux/task_work.h>
 #include <linux/keyctl.h>
 #include <linux/refcount.h>
+#include <linux/watch_queue.h>
 #include <linux/compat.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
@@ -99,7 +100,8 @@ extern int __key_link_begin(struct key *keyring,
 			    const struct keyring_index_key *index_key,
 			    struct assoc_array_edit **_edit);
 extern int __key_link_check_live_key(struct key *keyring, struct key *key);
-extern void __key_link(struct key *key, struct assoc_array_edit **_edit);
+extern void __key_link(struct key *keyring, struct key *key,
+		       struct assoc_array_edit **_edit);
 extern void __key_link_end(struct key *keyring,
 			   const struct keyring_index_key *index_key,
 			   struct assoc_array_edit *edit);
@@ -183,6 +185,23 @@ extern int key_task_permission(const key_ref_t key_ref,
 			       const struct cred *cred,
 			       key_perm_t perm);
 
+static inline void notify_key(struct key *key,
+			      enum key_notification_subtype subtype, u32 aux)
+{
+#ifdef CONFIG_KEY_NOTIFICATIONS
+	struct key_notification n = {
+		.watch.type	= WATCH_TYPE_KEY_NOTIFY,
+		.watch.subtype	= subtype,
+		.watch.info	= watch_sizeof(n),
+		.key_id		= key_serial(key),
+		.aux		= aux,
+	};
+
+	post_watch_notification(key->watchers, &n.watch, current_cred(),
+				n.key_id);
+#endif
+}
+
 /*
  * Check to see whether permission is granted to use a key in the desired way.
  */
@@ -333,6 +352,15 @@ static inline long keyctl_pkey_e_d_s(int op,
 
 extern long keyctl_capabilities(unsigned char __user *_buffer, size_t buflen);
 
+#ifdef CONFIG_KEY_NOTIFICATIONS
+extern long keyctl_watch_key(key_serial_t, int, int);
+#else
+static inline long keyctl_watch_key(key_serial_t key_id, int watch_fd, int watch_id)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
 /*
  * Debugging key validation
  */
diff --git a/security/keys/key.c b/security/keys/key.c
index e959b3c96b48..e282c6179b21 100644
--- a/security/keys/key.c
+++ b/security/keys/key.c
@@ -444,6 +444,7 @@ static int __key_instantiate_and_link(struct key *key,
 			/* mark the key as being instantiated */
 			atomic_inc(&key->user->nikeys);
 			mark_key_instantiated(key, 0);
+			notify_key(key, NOTIFY_KEY_INSTANTIATED, 0);
 
 			if (test_and_clear_bit(KEY_FLAG_USER_CONSTRUCT, &key->flags))
 				awaken = 1;
@@ -453,7 +454,7 @@ static int __key_instantiate_and_link(struct key *key,
 				if (test_bit(KEY_FLAG_KEEP, &keyring->flags))
 					set_bit(KEY_FLAG_KEEP, &key->flags);
 
-				__key_link(key, _edit);
+				__key_link(keyring, key, _edit);
 			}
 
 			/* disable the authorisation key */
@@ -601,6 +602,7 @@ int key_reject_and_link(struct key *key,
 		/* mark the key as being negatively instantiated */
 		atomic_inc(&key->user->nikeys);
 		mark_key_instantiated(key, -error);
+		notify_key(key, NOTIFY_KEY_INSTANTIATED, -error);
 		key->expiry = ktime_get_real_seconds() + timeout;
 		key_schedule_gc(key->expiry + key_gc_delay);
 
@@ -611,7 +613,7 @@ int key_reject_and_link(struct key *key,
 
 		/* and link it into the destination keyring */
 		if (keyring && link_ret == 0)
-			__key_link(key, &edit);
+			__key_link(keyring, key, &edit);
 
 		/* disable the authorisation key */
 		if (authkey)
@@ -764,9 +766,11 @@ static inline key_ref_t __key_update(key_ref_t key_ref,
 	down_write(&key->sem);
 
 	ret = key->type->update(key, prep);
-	if (ret == 0)
+	if (ret == 0) {
 		/* Updating a negative key positively instantiates it */
 		mark_key_instantiated(key, 0);
+		notify_key(key, NOTIFY_KEY_UPDATED, 0);
+	}
 
 	up_write(&key->sem);
 
@@ -1023,9 +1027,11 @@ int key_update(key_ref_t key_ref, const void *payload, size_t plen)
 	down_write(&key->sem);
 
 	ret = key->type->update(key, &prep);
-	if (ret == 0)
+	if (ret == 0) {
 		/* Updating a negative key positively instantiates it */
 		mark_key_instantiated(key, 0);
+		notify_key(key, NOTIFY_KEY_UPDATED, 0);
+	}
 
 	up_write(&key->sem);
 
@@ -1057,15 +1063,17 @@ void key_revoke(struct key *key)
 	 *   instantiated
 	 */
 	down_write_nested(&key->sem, 1);
-	if (!test_and_set_bit(KEY_FLAG_REVOKED, &key->flags) &&
-	    key->type->revoke)
-		key->type->revoke(key);
-
-	/* set the death time to no more than the expiry time */
-	time = ktime_get_real_seconds();
-	if (key->revoked_at == 0 || key->revoked_at > time) {
-		key->revoked_at = time;
-		key_schedule_gc(key->revoked_at + key_gc_delay);
+	if (!test_and_set_bit(KEY_FLAG_REVOKED, &key->flags)) {
+		notify_key(key, NOTIFY_KEY_REVOKED, 0);
+		if (key->type->revoke)
+			key->type->revoke(key);
+
+		/* set the death time to no more than the expiry time */
+		time = ktime_get_real_seconds();
+		if (key->revoked_at == 0 || key->revoked_at > time) {
+			key->revoked_at = time;
+			key_schedule_gc(key->revoked_at + key_gc_delay);
+		}
 	}
 
 	up_write(&key->sem);
@@ -1087,8 +1095,10 @@ void key_invalidate(struct key *key)
 
 	if (!test_bit(KEY_FLAG_INVALIDATED, &key->flags)) {
 		down_write_nested(&key->sem, 1);
-		if (!test_and_set_bit(KEY_FLAG_INVALIDATED, &key->flags))
+		if (!test_and_set_bit(KEY_FLAG_INVALIDATED, &key->flags)) {
+			notify_key(key, NOTIFY_KEY_INVALIDATED, 0);
 			key_schedule_gc_links();
+		}
 		up_write(&key->sem);
 	}
 }
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 5e01192e222a..7d8de1c9a478 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -37,7 +37,9 @@ static const unsigned char keyrings_capabilities[2] = {
 	       KEYCTL_CAPS0_MOVE
 	       ),
 	[1] = (KEYCTL_CAPS1_NS_KEYRING_NAME |
-	       KEYCTL_CAPS1_NS_KEY_TAG),
+	       KEYCTL_CAPS1_NS_KEY_TAG |
+	       (IS_ENABLED(CONFIG_KEY_NOTIFICATIONS)	? KEYCTL_CAPS1_NOTIFICATIONS : 0)
+	       ),
 };
 
 static int key_get_type_from_user(char *type,
@@ -1039,6 +1041,7 @@ long keyctl_chown_key(key_serial_t id, uid_t user, gid_t group)
 	if (group != (gid_t) -1)
 		key->gid = gid;
 
+	notify_key(key, NOTIFY_KEY_SETATTR, 0);
 	ret = 0;
 
 error_put:
@@ -1089,6 +1092,7 @@ long keyctl_setperm_key(key_serial_t id, key_perm_t perm)
 	/* if we're not the sysadmin, we can only change a key that we own */
 	if (capable(CAP_SYS_ADMIN) || uid_eq(key->uid, current_fsuid())) {
 		key->perm = perm;
+		notify_key(key, NOTIFY_KEY_SETATTR, 0);
 		ret = 0;
 	}
 
@@ -1480,10 +1484,12 @@ long keyctl_set_timeout(key_serial_t id, unsigned timeout)
 okay:
 	key = key_ref_to_ptr(key_ref);
 	ret = 0;
-	if (test_bit(KEY_FLAG_KEEP, &key->flags))
+	if (test_bit(KEY_FLAG_KEEP, &key->flags)) {
 		ret = -EPERM;
-	else
+	} else {
 		key_set_timeout(key, timeout);
+		notify_key(key, NOTIFY_KEY_SETATTR, 0);
+	}
 	key_put(key);
 
 error:
@@ -1757,6 +1763,90 @@ long keyctl_restrict_keyring(key_serial_t id, const char __user *_type,
 	return ret;
 }
 
+#ifdef CONFIG_KEY_NOTIFICATIONS
+/*
+ * Watch for changes to a key.
+ *
+ * The caller must have View permission to watch a key or keyring.
+ */
+long keyctl_watch_key(key_serial_t id, int watch_queue_fd, int watch_id)
+{
+	struct watch_queue *wqueue;
+	struct watch_list *wlist = NULL;
+	struct watch *watch = NULL;
+	struct key *key;
+	key_ref_t key_ref;
+	long ret;
+
+	if (watch_id < -1 || watch_id > 0xff)
+		return -EINVAL;
+
+	key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE, KEY_NEED_VIEW);
+	if (IS_ERR(key_ref))
+		return PTR_ERR(key_ref);
+	key = key_ref_to_ptr(key_ref);
+
+	wqueue = get_watch_queue(watch_queue_fd);
+	if (IS_ERR(wqueue)) {
+		ret = PTR_ERR(wqueue);
+		goto err_key;
+	}
+
+	if (watch_id >= 0) {
+		ret = -ENOMEM;
+		if (!key->watchers) {
+			wlist = kzalloc(sizeof(*wlist), GFP_KERNEL);
+			if (!wlist)
+				goto err_wqueue;
+			init_watch_list(wlist, NULL);
+		}
+
+		watch = kzalloc(sizeof(*watch), GFP_KERNEL);
+		if (!watch)
+			goto err_wlist;
+
+		init_watch(watch, wqueue);
+		watch->id	= key->serial;
+		watch->info_id	= (u32)watch_id << WATCH_INFO_ID__SHIFT;
+
+		ret = security_watch_key(key);
+		if (ret < 0)
+			goto err_watch;
+
+		down_write(&key->sem);
+		if (!key->watchers) {
+			key->watchers = wlist;
+			wlist = NULL;
+		}
+
+		ret = add_watch_to_object(watch, key->watchers);
+		up_write(&key->sem);
+
+		if (ret == 0)
+			watch = NULL;
+	} else {
+		ret = -EBADSLT;
+		if (key->watchers) {
+			down_write(&key->sem);
+			ret = remove_watch_from_object(key->watchers,
+						       wqueue, key_serial(key),
+						       false);
+			up_write(&key->sem);
+		}
+	}
+
+err_watch:
+	kfree(watch);
+err_wlist:
+	kfree(wlist);
+err_wqueue:
+	put_watch_queue(wqueue);
+err_key:
+	key_put(key);
+	return ret;
+}
+#endif /* CONFIG_KEY_NOTIFICATIONS */
+
 /*
  * Get keyrings subsystem capabilities.
  */
@@ -1926,6 +2016,9 @@ SYSCALL_DEFINE5(keyctl, int, option, unsigned long, arg2, unsigned long, arg3,
 	case KEYCTL_CAPABILITIES:
 		return keyctl_capabilities((unsigned char __user *)arg2, (size_t)arg3);
 
+	case KEYCTL_WATCH_KEY:
+		return keyctl_watch_key((key_serial_t)arg2, (int)arg3, (int)arg4);
+
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/security/keys/keyring.c b/security/keys/keyring.c
index 5ca620d31cd3..14abfe765b7e 100644
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -1056,12 +1056,14 @@ int keyring_restrict(key_ref_t keyring_ref, const char *type,
 	down_write(&keyring->sem);
 	down_write(&keyring_serialise_restrict_sem);
 
-	if (keyring->restrict_link)
+	if (keyring->restrict_link) {
 		ret = -EEXIST;
-	else if (keyring_detect_restriction_cycle(keyring, restrict_link))
+	} else if (keyring_detect_restriction_cycle(keyring, restrict_link)) {
 		ret = -EDEADLK;
-	else
+	} else {
 		keyring->restrict_link = restrict_link;
+		notify_key(keyring, NOTIFY_KEY_SETATTR, 0);
+	}
 
 	up_write(&keyring_serialise_restrict_sem);
 	up_write(&keyring->sem);
@@ -1362,12 +1364,14 @@ int __key_link_check_live_key(struct key *keyring, struct key *key)
  * holds at most one link to any given key of a particular type+description
  * combination.
  */
-void __key_link(struct key *key, struct assoc_array_edit **_edit)
+void __key_link(struct key *keyring, struct key *key,
+		struct assoc_array_edit **_edit)
 {
 	__key_get(key);
 	assoc_array_insert_set_object(*_edit, keyring_key_to_ptr(key));
 	assoc_array_apply_edit(*_edit);
 	*_edit = NULL;
+	notify_key(keyring, NOTIFY_KEY_LINKED, key_serial(key));
 }
 
 /*
@@ -1451,7 +1455,7 @@ int key_link(struct key *keyring, struct key *key)
 	if (ret == 0)
 		ret = __key_link_check_live_key(keyring, key);
 	if (ret == 0)
-		__key_link(key, &edit);
+		__key_link(keyring, key, &edit);
 
 error_end:
 	__key_link_end(keyring, &key->index_key, edit);
@@ -1483,7 +1487,7 @@ static int __key_unlink_begin(struct key *keyring, struct key *key,
 	struct assoc_array_edit *edit;
 
 	BUG_ON(*_edit != NULL);
-	
+
 	edit = assoc_array_delete(&keyring->keys, &keyring_assoc_array_ops,
 				  &key->index_key);
 	if (IS_ERR(edit))
@@ -1503,6 +1507,7 @@ static void __key_unlink(struct key *keyring, struct key *key,
 			 struct assoc_array_edit **_edit)
 {
 	assoc_array_apply_edit(*_edit);
+	notify_key(keyring, NOTIFY_KEY_UNLINKED, key_serial(key));
 	*_edit = NULL;
 	key_payload_reserve(keyring, keyring->datalen - KEYQUOTA_LINK_BYTES);
 }
@@ -1621,7 +1626,7 @@ int key_move(struct key *key,
 		goto error;
 
 	__key_unlink(from_keyring, key, &from_edit);
-	__key_link(key, &to_edit);
+	__key_link(to_keyring, key, &to_edit);
 error:
 	__key_link_end(to_keyring, &key->index_key, to_edit);
 	__key_unlink_end(from_keyring, key, from_edit);
@@ -1655,6 +1660,7 @@ int keyring_clear(struct key *keyring)
 	} else {
 		if (edit)
 			assoc_array_apply_edit(edit);
+		notify_key(keyring, NOTIFY_KEY_CLEARED, 0);
 		key_payload_reserve(keyring, 0);
 		ret = 0;
 	}
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index 957b9e3e1492..e1b9f1a80676 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -418,7 +418,7 @@ static int construct_alloc_key(struct keyring_search_context *ctx,
 		goto key_already_present;
 
 	if (dest_keyring)
-		__key_link(key, &edit);
+		__key_link(dest_keyring, key, &edit);
 
 	mutex_unlock(&key_construction_mutex);
 	if (dest_keyring)
@@ -437,7 +437,7 @@ static int construct_alloc_key(struct keyring_search_context *ctx,
 	if (dest_keyring) {
 		ret = __key_link_check_live_key(dest_keyring, key);
 		if (ret == 0)
-			__key_link(key, &edit);
+			__key_link(dest_keyring, key, &edit);
 		__key_link_end(dest_keyring, &ctx->index_key, edit);
 		if (ret < 0)
 			goto link_check_failed;
diff --git a/security/min_addr.c b/security/min_addr.c
index 94d2b0cf0e7b..88c9a6a21f47 100644
--- a/security/min_addr.c
+++ b/security/min_addr.c
@@ -30,7 +30,7 @@ static void update_mmap_min_addr(void)
  * calls update_mmap_min_addr() so non MAP_FIXED hints get rounded properly
  */
 int mmap_min_addr_handler(struct ctl_table *table, int write,
-			  void __user *buffer, size_t *lenp, loff_t *ppos)
+			  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
 
diff --git a/security/security.c b/security/security.c
index 7fed24b9d57e..43825cbcbe53 100644
--- a/security/security.c
+++ b/security/security.c
@@ -2007,6 +2007,29 @@ int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
 }
 EXPORT_SYMBOL(security_inode_getsecctx);
 
+#ifdef CONFIG_WATCH_QUEUE
+int security_post_notification(const struct cred *w_cred,
+			       const struct cred *cred,
+			       struct watch_notification *n)
+{
+	return call_int_hook(post_notification, 0, w_cred, cred, n);
+}
+#endif /* CONFIG_WATCH_QUEUE */
+
+#ifdef CONFIG_KEY_NOTIFICATIONS
+int security_watch_key(struct key *key)
+{
+	return call_int_hook(watch_key, 0, key);
+}
+#endif
+
+#ifdef CONFIG_DEVICE_NOTIFICATIONS
+int security_watch_devices(void)
+{
+	return call_int_hook(watch_devices, 0);
+}
+#endif
+
 #ifdef CONFIG_SECURITY_NETWORK
 
 int security_unix_stream_connect(struct sock *sock, struct sock *other, struct sock *newsk)
diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index 0c77ede1cc11..4d8e0e8adf0b 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_SECURITY_SELINUX) := selinux.o
 selinux-y := avc.o hooks.o selinuxfs.o netlink.o nlmsgtab.o netif.o \
 	     netnode.o netport.o status.o \
 	     ss/ebitmap.o ss/hashtab.o ss/symtab.o ss/sidtab.o ss/avtab.o \
-	     ss/policydb.o ss/services.o ss/conditional.o ss/mls.o
+	     ss/policydb.o ss/services.o ss/conditional.o ss/mls.o ss/context.o
 
 selinux-$(CONFIG_SECURITY_NETWORK_XFRM) += xfrm.o
 
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 0b4e32161b77..1ae079bf81f4 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -6576,6 +6576,17 @@ static int selinux_key_getsecurity(struct key *key, char **_buffer)
 	*_buffer = context;
 	return rc;
 }
+
+#ifdef CONFIG_KEY_NOTIFICATIONS
+static int selinux_watch_key(struct key *key)
+{
+	struct key_security_struct *ksec = key->security;
+	u32 sid = current_sid();
+
+	return avc_has_perm(&selinux_state,
+			    sid, ksec->sid, SECCLASS_KEY, KEY_NEED_VIEW, NULL);
+}
+#endif
 #endif
 
 #ifdef CONFIG_SECURITY_INFINIBAND
@@ -7091,6 +7102,9 @@ static struct security_hook_list selinux_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(key_free, selinux_key_free),
 	LSM_HOOK_INIT(key_permission, selinux_key_permission),
 	LSM_HOOK_INIT(key_getsecurity, selinux_key_getsecurity),
+#ifdef CONFIG_KEY_NOTIFICATIONS
+	LSM_HOOK_INIT(watch_key, selinux_watch_key),
+#endif
 #endif
 
 #ifdef CONFIG_AUDIT
diff --git a/security/selinux/include/classmap.h b/security/selinux/include/classmap.h
index 986f3ac14282..d233ab3f1533 100644
--- a/security/selinux/include/classmap.h
+++ b/security/selinux/include/classmap.h
@@ -27,9 +27,9 @@
 	    "audit_control", "setfcap"
 
 #define COMMON_CAP2_PERMS  "mac_override", "mac_admin", "syslog", \
-		"wake_alarm", "block_suspend", "audit_read"
+		"wake_alarm", "block_suspend", "audit_read", "perfmon"
 
-#if CAP_LAST_CAP > CAP_AUDIT_READ
+#if CAP_LAST_CAP > CAP_PERFMON
 #error New capability defined, please update COMMON_CAP2_PERMS.
 #endif
 
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index d6036c018cf2..b0e02cfe3ce1 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -41,10 +41,11 @@
 #define POLICYDB_VERSION_XPERMS_IOCTL	30
 #define POLICYDB_VERSION_INFINIBAND		31
 #define POLICYDB_VERSION_GLBLUB		32
+#define POLICYDB_VERSION_COMP_FTRANS	33 /* compressed filename transitions */
 
 /* Range of policy versions we understand*/
 #define POLICYDB_VERSION_MIN   POLICYDB_VERSION_BASE
-#define POLICYDB_VERSION_MAX   POLICYDB_VERSION_GLBLUB
+#define POLICYDB_VERSION_MAX   POLICYDB_VERSION_COMP_FTRANS
 
 /* Mask for just the mount related flags */
 #define SE_MNTMASK	0x0f
diff --git a/security/selinux/ss/context.c b/security/selinux/ss/context.c
new file mode 100644
index 000000000000..38bc0aa524a6
--- /dev/null
+++ b/security/selinux/ss/context.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Implementations of the security context functions.
+ *
+ * Author: Ondrej Mosnacek <omosnacek@gmail.com>
+ * Copyright (C) 2020 Red Hat, Inc.
+ */
+
+#include <linux/jhash.h>
+
+#include "context.h"
+#include "mls.h"
+
+u32 context_compute_hash(const struct context *c)
+{
+	u32 hash = 0;
+
+	/*
+	 * If a context is invalid, it will always be represented by a
+	 * context struct with only the len & str set (and vice versa)
+	 * under a given policy. Since context structs from different
+	 * policies should never meet, it is safe to hash valid and
+	 * invalid contexts differently. The context_cmp() function
+	 * already operates under the same assumption.
+	 */
+	if (c->len)
+		return full_name_hash(NULL, c->str, c->len);
+
+	hash = jhash_3words(c->user, c->role, c->type, hash);
+	hash = mls_range_hash(&c->range, hash);
+	return hash;
+}
diff --git a/security/selinux/ss/context.h b/security/selinux/ss/context.h
index 3ba044fe02ed..62990aa1ec9e 100644
--- a/security/selinux/ss/context.h
+++ b/security/selinux/ss/context.h
@@ -31,7 +31,6 @@ struct context {
 	u32 len;        /* length of string in bytes */
 	struct mls_range range;
 	char *str;	/* string representation if context cannot be mapped. */
-	u32 hash;	/* a hash of the string representation */
 };
 
 static inline void mls_context_init(struct context *c)
@@ -169,13 +168,12 @@ static inline int context_cpy(struct context *dst, struct context *src)
 		kfree(dst->str);
 		return rc;
 	}
-	dst->hash = src->hash;
 	return 0;
 }
 
 static inline void context_destroy(struct context *c)
 {
-	c->user = c->role = c->type = c->hash = 0;
+	c->user = c->role = c->type = 0;
 	kfree(c->str);
 	c->str = NULL;
 	c->len = 0;
@@ -184,8 +182,6 @@ static inline void context_destroy(struct context *c)
 
 static inline int context_cmp(struct context *c1, struct context *c2)
 {
-	if (c1->hash && c2->hash && (c1->hash != c2->hash))
-		return 0;
 	if (c1->len && c2->len)
 		return (c1->len == c2->len && !strcmp(c1->str, c2->str));
 	if (c1->len || c2->len)
@@ -196,10 +192,7 @@ static inline int context_cmp(struct context *c1, struct context *c2)
 		mls_context_cmp(c1, c2));
 }
 
-static inline unsigned int context_compute_hash(const char *s)
-{
-	return full_name_hash(NULL, s, strlen(s));
-}
+u32 context_compute_hash(const struct context *c);
 
 #endif	/* _SS_CONTEXT_H_ */
 
diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c
index c8c3663111e2..14bedc95c6dc 100644
--- a/security/selinux/ss/ebitmap.c
+++ b/security/selinux/ss/ebitmap.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
+#include <linux/jhash.h>
 #include <net/netlabel.h>
 #include "ebitmap.h"
 #include "policydb.h"
@@ -542,6 +543,19 @@ int ebitmap_write(struct ebitmap *e, void *fp)
 	return 0;
 }
 
+u32 ebitmap_hash(const struct ebitmap *e, u32 hash)
+{
+	struct ebitmap_node *node;
+
+	/* need to change hash even if ebitmap is empty */
+	hash = jhash_1word(e->highbit, hash);
+	for (node = e->node; node; node = node->next) {
+		hash = jhash_1word(node->startbit, hash);
+		hash = jhash(node->maps, sizeof(node->maps), hash);
+	}
+	return hash;
+}
+
 void __init ebitmap_cache_init(void)
 {
 	ebitmap_node_cachep = kmem_cache_create("ebitmap_node",
diff --git a/security/selinux/ss/ebitmap.h b/security/selinux/ss/ebitmap.h
index 9a23b81b8832..9eb2d0af2805 100644
--- a/security/selinux/ss/ebitmap.h
+++ b/security/selinux/ss/ebitmap.h
@@ -131,6 +131,7 @@ int ebitmap_set_bit(struct ebitmap *e, unsigned long bit, int value);
 void ebitmap_destroy(struct ebitmap *e);
 int ebitmap_read(struct ebitmap *e, void *fp);
 int ebitmap_write(struct ebitmap *e, void *fp);
+u32 ebitmap_hash(const struct ebitmap *e, u32 hash);
 
 #ifdef CONFIG_NETLABEL
 int ebitmap_netlbl_export(struct ebitmap *ebmap,
diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c
index ec5e3d1da9ac..6a5d7d08933d 100644
--- a/security/selinux/ss/mls.c
+++ b/security/selinux/ss/mls.c
@@ -536,7 +536,7 @@ int mls_compute_sid(struct policydb *p,
 
 		/* Fallthrough */
 	case AVTAB_CHANGE:
-		if ((tclass == p->process_class) || (sock == true))
+		if ((tclass == p->process_class) || sock)
 			/* Use the process MLS attributes. */
 			return mls_context_cpy(newcontext, scontext);
 		else
diff --git a/security/selinux/ss/mls.h b/security/selinux/ss/mls.h
index 7954b1e60b64..15cacde0ff61 100644
--- a/security/selinux/ss/mls.h
+++ b/security/selinux/ss/mls.h
@@ -22,7 +22,10 @@
 #ifndef _SS_MLS_H_
 #define _SS_MLS_H_
 
+#include <linux/jhash.h>
+
 #include "context.h"
+#include "ebitmap.h"
 #include "policydb.h"
 
 int mls_compute_context_len(struct policydb *p, struct context *context);
@@ -101,5 +104,13 @@ static inline int mls_import_netlbl_cat(struct policydb *p,
 }
 #endif
 
+static inline u32 mls_range_hash(const struct mls_range *r, u32 hash)
+{
+	hash = jhash_2words(r->level[0].sens, r->level[1].sens, hash);
+	hash = ebitmap_hash(&r->level[0].cat, hash);
+	hash = ebitmap_hash(&r->level[1].cat, hash);
+	return hash;
+}
+
 #endif	/* _SS_MLS_H */
 
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index c21b922e5ebe..a0b3dc152468 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -154,6 +154,11 @@ static struct policydb_compat_info policydb_compat[] = {
 		.sym_num	= SYM_NUM,
 		.ocon_num	= OCON_NUM,
 	},
+	{
+		.version	= POLICYDB_VERSION_COMP_FTRANS,
+		.sym_num	= SYM_NUM,
+		.ocon_num	= OCON_NUM,
+	},
 };
 
 static struct policydb_compat_info *policydb_lookup_compat(int version)
@@ -352,6 +357,13 @@ static int range_tr_destroy(void *key, void *datum, void *p)
 	return 0;
 }
 
+static int role_tr_destroy(void *key, void *datum, void *p)
+{
+	kfree(key);
+	kfree(datum);
+	return 0;
+}
+
 static void ocontext_destroy(struct ocontext *c, int i)
 {
 	if (!c)
@@ -458,26 +470,43 @@ static int rangetr_cmp(struct hashtab *h, const void *k1, const void *k2)
 	return v;
 }
 
+static u32 role_trans_hash(struct hashtab *h, const void *k)
+{
+	const struct role_trans_key *key = k;
+
+	return (key->role + (key->type << 3) + (key->tclass << 5)) &
+		(h->size - 1);
+}
+
+static int role_trans_cmp(struct hashtab *h, const void *k1, const void *k2)
+{
+	const struct role_trans_key *key1 = k1, *key2 = k2;
+	int v;
+
+	v = key1->role - key2->role;
+	if (v)
+		return v;
+
+	v = key1->type - key2->type;
+	if (v)
+		return v;
+
+	return key1->tclass - key2->tclass;
+}
+
 /*
  * Initialize a policy database structure.
  */
-static int policydb_init(struct policydb *p)
+static void policydb_init(struct policydb *p)
 {
 	memset(p, 0, sizeof(*p));
 
 	avtab_init(&p->te_avtab);
 	cond_policydb_init(p);
 
-	p->filename_trans = hashtab_create(filenametr_hash, filenametr_cmp,
-					   (1 << 11));
-	if (!p->filename_trans)
-		return -ENOMEM;
-
 	ebitmap_init(&p->filename_trans_ttypes);
 	ebitmap_init(&p->policycaps);
 	ebitmap_init(&p->permissive_map);
-
-	return 0;
 }
 
 /*
@@ -728,7 +757,6 @@ void policydb_destroy(struct policydb *p)
 	struct genfs *g, *gtmp;
 	int i;
 	struct role_allow *ra, *lra = NULL;
-	struct role_trans *tr, *ltr = NULL;
 
 	for (i = 0; i < SYM_NUM; i++) {
 		cond_resched();
@@ -775,12 +803,8 @@ void policydb_destroy(struct policydb *p)
 
 	cond_policydb_destroy(p);
 
-	for (tr = p->role_tr; tr; tr = tr->next) {
-		cond_resched();
-		kfree(ltr);
-		ltr = tr;
-	}
-	kfree(ltr);
+	hashtab_map(p->role_tr, role_tr_destroy, NULL);
+	hashtab_destroy(p->role_tr);
 
 	for (ra = p->role_allow; ra; ra = ra->next) {
 		cond_resched();
@@ -836,11 +860,6 @@ int policydb_load_isids(struct policydb *p, struct sidtab *s)
 		if (!name)
 			continue;
 
-		rc = context_add_hash(p, &c->context[0]);
-		if (rc) {
-			sidtab_destroy(s);
-			goto out;
-		}
 		rc = sidtab_set_initial(s, sid, &c->context[0]);
 		if (rc) {
 			pr_err("SELinux:  unable to load initial SID %s.\n",
@@ -1841,7 +1860,7 @@ static int range_read(struct policydb *p, void *fp)
 	return rc;
 }
 
-static int filename_trans_read_one(struct policydb *p, void *fp)
+static int filename_trans_read_helper_compat(struct policydb *p, void *fp)
 {
 	struct filename_trans_key key, *ft = NULL;
 	struct filename_trans_datum *last, *datum = NULL;
@@ -1924,6 +1943,94 @@ static int filename_trans_read_one(struct policydb *p, void *fp)
 	return rc;
 }
 
+static int filename_trans_read_helper(struct policydb *p, void *fp)
+{
+	struct filename_trans_key *ft = NULL;
+	struct filename_trans_datum **dst, *datum, *first = NULL;
+	char *name = NULL;
+	u32 len, ttype, tclass, ndatum, i;
+	__le32 buf[3];
+	int rc;
+
+	/* length of the path component string */
+	rc = next_entry(buf, fp, sizeof(u32));
+	if (rc)
+		return rc;
+	len = le32_to_cpu(buf[0]);
+
+	/* path component string */
+	rc = str_read(&name, GFP_KERNEL, fp, len);
+	if (rc)
+		return rc;
+
+	rc = next_entry(buf, fp, sizeof(u32) * 3);
+	if (rc)
+		goto out;
+
+	ttype = le32_to_cpu(buf[0]);
+	tclass = le32_to_cpu(buf[1]);
+
+	ndatum = le32_to_cpu(buf[2]);
+	if (ndatum == 0) {
+		pr_err("SELinux:  Filename transition key with no datum\n");
+		rc = -ENOENT;
+		goto out;
+	}
+
+	dst = &first;
+	for (i = 0; i < ndatum; i++) {
+		rc = -ENOMEM;
+		datum = kmalloc(sizeof(*datum), GFP_KERNEL);
+		if (!datum)
+			goto out;
+
+		*dst = datum;
+
+		/* ebitmap_read() will at least init the bitmap */
+		rc = ebitmap_read(&datum->stypes, fp);
+		if (rc)
+			goto out;
+
+		rc = next_entry(buf, fp, sizeof(u32));
+		if (rc)
+			goto out;
+
+		datum->otype = le32_to_cpu(buf[0]);
+		datum->next = NULL;
+
+		dst = &datum->next;
+	}
+
+	rc = -ENOMEM;
+	ft = kmalloc(sizeof(*ft), GFP_KERNEL);
+	if (!ft)
+		goto out;
+
+	ft->ttype = ttype;
+	ft->tclass = tclass;
+	ft->name = name;
+
+	rc = hashtab_insert(p->filename_trans, ft, first);
+	if (rc == -EEXIST)
+		pr_err("SELinux:  Duplicate filename transition key\n");
+	if (rc)
+		goto out;
+
+	return ebitmap_set_bit(&p->filename_trans_ttypes, ttype, 1);
+
+out:
+	kfree(ft);
+	kfree(name);
+	while (first) {
+		datum = first;
+		first = first->next;
+
+		ebitmap_destroy(&datum->stypes);
+		kfree(datum);
+	}
+	return rc;
+}
+
 static int filename_trans_read(struct policydb *p, void *fp)
 {
 	u32 nel;
@@ -1938,12 +2045,29 @@ static int filename_trans_read(struct policydb *p, void *fp)
 		return rc;
 	nel = le32_to_cpu(buf[0]);
 
-	p->filename_trans_count = nel;
+	if (p->policyvers < POLICYDB_VERSION_COMP_FTRANS) {
+		p->compat_filename_trans_count = nel;
+		p->filename_trans = hashtab_create(filenametr_hash,
+						   filenametr_cmp, (1 << 11));
+		if (!p->filename_trans)
+			return -ENOMEM;
 
-	for (i = 0; i < nel; i++) {
-		rc = filename_trans_read_one(p, fp);
-		if (rc)
-			return rc;
+		for (i = 0; i < nel; i++) {
+			rc = filename_trans_read_helper_compat(p, fp);
+			if (rc)
+				return rc;
+		}
+	} else {
+		p->filename_trans = hashtab_create(filenametr_hash,
+						   filenametr_cmp, nel);
+		if (!p->filename_trans)
+			return -ENOMEM;
+
+		for (i = 0; i < nel; i++) {
+			rc = filename_trans_read_helper(p, fp);
+			if (rc)
+				return rc;
+		}
 	}
 	hash_eval(p->filename_trans, "filenametr");
 	return 0;
@@ -2251,7 +2375,8 @@ static int ocontext_read(struct policydb *p, struct policydb_compat_info *info,
 int policydb_read(struct policydb *p, void *fp)
 {
 	struct role_allow *ra, *lra;
-	struct role_trans *tr, *ltr;
+	struct role_trans_key *rtk = NULL;
+	struct role_trans_datum *rtd = NULL;
 	int i, j, rc;
 	__le32 buf[4];
 	u32 len, nprim, nel;
@@ -2259,9 +2384,7 @@ int policydb_read(struct policydb *p, void *fp)
 	char *policydb_str;
 	struct policydb_compat_info *info;
 
-	rc = policydb_init(p);
-	if (rc)
-		return rc;
+	policydb_init(p);
 
 	/* Read the magic number and string length. */
 	rc = next_entry(buf, fp, sizeof(u32) * 2);
@@ -2416,39 +2539,50 @@ int policydb_read(struct policydb *p, void *fp)
 	if (rc)
 		goto bad;
 	nel = le32_to_cpu(buf[0]);
-	ltr = NULL;
+
+	p->role_tr = hashtab_create(role_trans_hash, role_trans_cmp, nel);
+	if (!p->role_tr)
+		goto bad;
 	for (i = 0; i < nel; i++) {
 		rc = -ENOMEM;
-		tr = kzalloc(sizeof(*tr), GFP_KERNEL);
-		if (!tr)
+		rtk = kmalloc(sizeof(*rtk), GFP_KERNEL);
+		if (!rtk)
 			goto bad;
-		if (ltr)
-			ltr->next = tr;
-		else
-			p->role_tr = tr;
+
+		rc = -ENOMEM;
+		rtd = kmalloc(sizeof(*rtd), GFP_KERNEL);
+		if (!rtd)
+			goto bad;
+
 		rc = next_entry(buf, fp, sizeof(u32)*3);
 		if (rc)
 			goto bad;
 
 		rc = -EINVAL;
-		tr->role = le32_to_cpu(buf[0]);
-		tr->type = le32_to_cpu(buf[1]);
-		tr->new_role = le32_to_cpu(buf[2]);
+		rtk->role = le32_to_cpu(buf[0]);
+		rtk->type = le32_to_cpu(buf[1]);
+		rtd->new_role = le32_to_cpu(buf[2]);
 		if (p->policyvers >= POLICYDB_VERSION_ROLETRANS) {
 			rc = next_entry(buf, fp, sizeof(u32));
 			if (rc)
 				goto bad;
-			tr->tclass = le32_to_cpu(buf[0]);
+			rtk->tclass = le32_to_cpu(buf[0]);
 		} else
-			tr->tclass = p->process_class;
+			rtk->tclass = p->process_class;
 
 		rc = -EINVAL;
-		if (!policydb_role_isvalid(p, tr->role) ||
-		    !policydb_type_isvalid(p, tr->type) ||
-		    !policydb_class_isvalid(p, tr->tclass) ||
-		    !policydb_role_isvalid(p, tr->new_role))
+		if (!policydb_role_isvalid(p, rtk->role) ||
+		    !policydb_type_isvalid(p, rtk->type) ||
+		    !policydb_class_isvalid(p, rtk->tclass) ||
+		    !policydb_role_isvalid(p, rtd->new_role))
+			goto bad;
+
+		rc = hashtab_insert(p->role_tr, rtk, rtd);
+		if (rc)
 			goto bad;
-		ltr = tr;
+
+		rtk = NULL;
+		rtd = NULL;
 	}
 
 	rc = next_entry(buf, fp, sizeof(u32));
@@ -2536,6 +2670,8 @@ int policydb_read(struct policydb *p, void *fp)
 out:
 	return rc;
 bad:
+	kfree(rtk);
+	kfree(rtd);
 	policydb_destroy(p);
 	goto out;
 }
@@ -2653,39 +2789,45 @@ static int cat_write(void *vkey, void *datum, void *ptr)
 	return 0;
 }
 
-static int role_trans_write(struct policydb *p, void *fp)
+static int role_trans_write_one(void *key, void *datum, void *ptr)
 {
-	struct role_trans *r = p->role_tr;
-	struct role_trans *tr;
+	struct role_trans_key *rtk = key;
+	struct role_trans_datum *rtd = datum;
+	struct policy_data *pd = ptr;
+	void *fp = pd->fp;
+	struct policydb *p = pd->p;
 	__le32 buf[3];
-	size_t nel;
 	int rc;
 
-	nel = 0;
-	for (tr = r; tr; tr = tr->next)
-		nel++;
-	buf[0] = cpu_to_le32(nel);
-	rc = put_entry(buf, sizeof(u32), 1, fp);
+	buf[0] = cpu_to_le32(rtk->role);
+	buf[1] = cpu_to_le32(rtk->type);
+	buf[2] = cpu_to_le32(rtd->new_role);
+	rc = put_entry(buf, sizeof(u32), 3, fp);
 	if (rc)
 		return rc;
-	for (tr = r; tr; tr = tr->next) {
-		buf[0] = cpu_to_le32(tr->role);
-		buf[1] = cpu_to_le32(tr->type);
-		buf[2] = cpu_to_le32(tr->new_role);
-		rc = put_entry(buf, sizeof(u32), 3, fp);
+	if (p->policyvers >= POLICYDB_VERSION_ROLETRANS) {
+		buf[0] = cpu_to_le32(rtk->tclass);
+		rc = put_entry(buf, sizeof(u32), 1, fp);
 		if (rc)
 			return rc;
-		if (p->policyvers >= POLICYDB_VERSION_ROLETRANS) {
-			buf[0] = cpu_to_le32(tr->tclass);
-			rc = put_entry(buf, sizeof(u32), 1, fp);
-			if (rc)
-				return rc;
-		}
 	}
-
 	return 0;
 }
 
+static int role_trans_write(struct policydb *p, void *fp)
+{
+	struct policy_data pd = { .p = p, .fp = fp };
+	__le32 buf[1];
+	int rc;
+
+	buf[0] = cpu_to_le32(p->role_tr->nel);
+	rc = put_entry(buf, sizeof(u32), 1, fp);
+	if (rc)
+		return rc;
+
+	return hashtab_map(p->role_tr, role_trans_write_one, &pd);
+}
+
 static int role_allow_write(struct role_allow *r, void *fp)
 {
 	struct role_allow *ra;
@@ -3326,7 +3468,7 @@ static int range_write(struct policydb *p, void *fp)
 	return 0;
 }
 
-static int filename_write_helper(void *key, void *data, void *ptr)
+static int filename_write_helper_compat(void *key, void *data, void *ptr)
 {
 	struct filename_trans_key *ft = key;
 	struct filename_trans_datum *datum = data;
@@ -3363,26 +3505,82 @@ static int filename_write_helper(void *key, void *data, void *ptr)
 	return 0;
 }
 
-static int filename_trans_write(struct policydb *p, void *fp)
+static int filename_write_helper(void *key, void *data, void *ptr)
 {
-	__le32 buf[1];
+	struct filename_trans_key *ft = key;
+	struct filename_trans_datum *datum;
+	void *fp = ptr;
+	__le32 buf[3];
 	int rc;
+	u32 ndatum, len = strlen(ft->name);
 
-	if (p->policyvers < POLICYDB_VERSION_FILENAME_TRANS)
-		return 0;
-
-	buf[0] = cpu_to_le32(p->filename_trans_count);
+	buf[0] = cpu_to_le32(len);
 	rc = put_entry(buf, sizeof(u32), 1, fp);
 	if (rc)
 		return rc;
 
-	rc = hashtab_map(p->filename_trans, filename_write_helper, fp);
+	rc = put_entry(ft->name, sizeof(char), len, fp);
 	if (rc)
 		return rc;
 
+	ndatum = 0;
+	datum = data;
+	do {
+		ndatum++;
+		datum = datum->next;
+	} while (unlikely(datum));
+
+	buf[0] = cpu_to_le32(ft->ttype);
+	buf[1] = cpu_to_le32(ft->tclass);
+	buf[2] = cpu_to_le32(ndatum);
+	rc = put_entry(buf, sizeof(u32), 3, fp);
+	if (rc)
+		return rc;
+
+	datum = data;
+	do {
+		rc = ebitmap_write(&datum->stypes, fp);
+		if (rc)
+			return rc;
+
+		buf[0] = cpu_to_le32(datum->otype);
+		rc = put_entry(buf, sizeof(u32), 1, fp);
+		if (rc)
+			return rc;
+
+		datum = datum->next;
+	} while (unlikely(datum));
+
 	return 0;
 }
 
+static int filename_trans_write(struct policydb *p, void *fp)
+{
+	__le32 buf[1];
+	int rc;
+
+	if (p->policyvers < POLICYDB_VERSION_FILENAME_TRANS)
+		return 0;
+
+	if (p->policyvers < POLICYDB_VERSION_COMP_FTRANS) {
+		buf[0] = cpu_to_le32(p->compat_filename_trans_count);
+		rc = put_entry(buf, sizeof(u32), 1, fp);
+		if (rc)
+			return rc;
+
+		rc = hashtab_map(p->filename_trans,
+				 filename_write_helper_compat, fp);
+	} else {
+		buf[0] = cpu_to_le32(p->filename_trans->nel);
+		rc = put_entry(buf, sizeof(u32), 1, fp);
+		if (rc)
+			return rc;
+
+		rc = hashtab_map(p->filename_trans, filename_write_helper, fp);
+	}
+	return rc;
+}
+
 /*
  * Write the configuration data in a policy database
  * structure to a policy database binary representation
diff --git a/security/selinux/ss/policydb.h b/security/selinux/ss/policydb.h
index 72e2932fb12d..35dc6aa7904d 100644
--- a/security/selinux/ss/policydb.h
+++ b/security/selinux/ss/policydb.h
@@ -81,12 +81,14 @@ struct role_datum {
 	struct ebitmap types;		/* set of authorized types for role */
 };
 
-struct role_trans {
+struct role_trans_key {
 	u32 role;		/* current role */
 	u32 type;		/* program executable type, or new object type */
 	u32 tclass;		/* process class, or new object class */
+};
+
+struct role_trans_datum {
 	u32 new_role;		/* new role */
-	struct role_trans *next;
 };
 
 struct filename_trans_key {
@@ -261,14 +263,15 @@ struct policydb {
 	struct avtab te_avtab;
 
 	/* role transitions */
-	struct role_trans *role_tr;
+	struct hashtab *role_tr;
 
 	/* file transitions with the last path component */
 	/* quickly exclude lookups when parent ttype has no rules */
 	struct ebitmap filename_trans_ttypes;
 	/* actual set of filename_trans rules */
 	struct hashtab *filename_trans;
-	u32 filename_trans_count;
+	/* only used if policyvers < POLICYDB_VERSION_COMP_FTRANS */
+	u32 compat_filename_trans_count;
 
 	/* bools indexed by (value - 1) */
 	struct cond_bool_datum **bool_val_to_struct;
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 8ad34fd031d1..b49a336b1e6e 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -1490,42 +1490,6 @@ static int string_to_context_struct(struct policydb *pol,
 	return rc;
 }
 
-int context_add_hash(struct policydb *policydb,
-		     struct context *context)
-{
-	int rc;
-	char *str;
-	int len;
-
-	if (context->str) {
-		context->hash = context_compute_hash(context->str);
-	} else {
-		rc = context_struct_to_string(policydb, context,
-					      &str, &len);
-		if (rc)
-			return rc;
-		context->hash = context_compute_hash(str);
-		kfree(str);
-	}
-	return 0;
-}
-
-static int context_struct_to_sid(struct selinux_state *state,
-				 struct context *context, u32 *sid)
-{
-	int rc;
-	struct sidtab *sidtab = state->ss->sidtab;
-	struct policydb *policydb = &state->ss->policydb;
-
-	if (!context->hash) {
-		rc = context_add_hash(policydb, context);
-		if (rc)
-			return rc;
-	}
-
-	return sidtab_context_to_sid(sidtab, context, sid);
-}
-
 static int security_context_to_sid_core(struct selinux_state *state,
 					const char *scontext, u32 scontext_len,
 					u32 *sid, u32 def_sid, gfp_t gfp_flags,
@@ -1580,7 +1544,7 @@ static int security_context_to_sid_core(struct selinux_state *state,
 		str = NULL;
 	} else if (rc)
 		goto out_unlock;
-	rc = context_struct_to_sid(state, &context, sid);
+	rc = sidtab_context_to_sid(sidtab, &context, sid);
 	context_destroy(&context);
 out_unlock:
 	read_unlock(&state->ss->policy_rwlock);
@@ -1731,7 +1695,6 @@ static int security_compute_sid(struct selinux_state *state,
 	struct class_datum *cladatum = NULL;
 	struct context *scontext, *tcontext, newcontext;
 	struct sidtab_entry *sentry, *tentry;
-	struct role_trans *roletr = NULL;
 	struct avtab_key avkey;
 	struct avtab_datum *avdatum;
 	struct avtab_node *node;
@@ -1812,7 +1775,7 @@ static int security_compute_sid(struct selinux_state *state,
 	} else if (cladatum && cladatum->default_role == DEFAULT_TARGET) {
 		newcontext.role = tcontext->role;
 	} else {
-		if ((tclass == policydb->process_class) || (sock == true))
+		if ((tclass == policydb->process_class) || sock)
 			newcontext.role = scontext->role;
 		else
 			newcontext.role = OBJECT_R_VAL;
@@ -1824,7 +1787,7 @@ static int security_compute_sid(struct selinux_state *state,
 	} else if (cladatum && cladatum->default_type == DEFAULT_TARGET) {
 		newcontext.type = tcontext->type;
 	} else {
-		if ((tclass == policydb->process_class) || (sock == true)) {
+		if ((tclass == policydb->process_class) || sock) {
 			/* Use the type of process. */
 			newcontext.type = scontext->type;
 		} else {
@@ -1864,16 +1827,16 @@ static int security_compute_sid(struct selinux_state *state,
 	/* Check for class-specific changes. */
 	if (specified & AVTAB_TRANSITION) {
 		/* Look for a role transition rule. */
-		for (roletr = policydb->role_tr; roletr;
-		     roletr = roletr->next) {
-			if ((roletr->role == scontext->role) &&
-			    (roletr->type == tcontext->type) &&
-			    (roletr->tclass == tclass)) {
-				/* Use the role transition rule. */
-				newcontext.role = roletr->new_role;
-				break;
-			}
-		}
+		struct role_trans_datum *rtd;
+		struct role_trans_key rtk = {
+			.role = scontext->role,
+			.type = tcontext->type,
+			.tclass = tclass,
+		};
+
+		rtd = hashtab_search(policydb->role_tr, &rtk);
+		if (rtd)
+			newcontext.role = rtd->new_role;
 	}
 
 	/* Set the MLS attributes.
@@ -1891,7 +1854,7 @@ static int security_compute_sid(struct selinux_state *state,
 			goto out_unlock;
 	}
 	/* Obtain the sid for the context. */
-	rc = context_struct_to_sid(state, &newcontext, out_sid);
+	rc = sidtab_context_to_sid(sidtab, &newcontext, out_sid);
 out_unlock:
 	read_unlock(&state->ss->policy_rwlock);
 	context_destroy(&newcontext);
@@ -2043,7 +2006,6 @@ static int convert_context(struct context *oldc, struct context *newc, void *p)
 			context_init(newc);
 			newc->str = s;
 			newc->len = oldc->len;
-			newc->hash = oldc->hash;
 			return 0;
 		}
 		kfree(s);
@@ -2120,10 +2082,6 @@ static int convert_context(struct context *oldc, struct context *newc, void *p)
 			goto bad;
 	}
 
-	rc = context_add_hash(args->newp, newc);
-	if (rc)
-		goto bad;
-
 	return 0;
 bad:
 	/* Map old representation to string and save it. */
@@ -2133,7 +2091,6 @@ static int convert_context(struct context *oldc, struct context *newc, void *p)
 	context_destroy(newc);
 	newc->str = s;
 	newc->len = len;
-	newc->hash = context_compute_hash(s);
 	pr_info("SELinux:  Context %s became invalid (unmapped).\n",
 		newc->str);
 	return 0;
@@ -2350,12 +2307,14 @@ int security_port_sid(struct selinux_state *state,
 		      u8 protocol, u16 port, u32 *out_sid)
 {
 	struct policydb *policydb;
+	struct sidtab *sidtab;
 	struct ocontext *c;
 	int rc = 0;
 
 	read_lock(&state->ss->policy_rwlock);
 
 	policydb = &state->ss->policydb;
+	sidtab = state->ss->sidtab;
 
 	c = policydb->ocontexts[OCON_PORT];
 	while (c) {
@@ -2368,7 +2327,7 @@ int security_port_sid(struct selinux_state *state,
 
 	if (c) {
 		if (!c->sid[0]) {
-			rc = context_struct_to_sid(state, &c->context[0],
+			rc = sidtab_context_to_sid(sidtab, &c->context[0],
 						   &c->sid[0]);
 			if (rc)
 				goto out;
@@ -2393,12 +2352,14 @@ int security_ib_pkey_sid(struct selinux_state *state,
 			 u64 subnet_prefix, u16 pkey_num, u32 *out_sid)
 {
 	struct policydb *policydb;
+	struct sidtab *sidtab;
 	struct ocontext *c;
 	int rc = 0;
 
 	read_lock(&state->ss->policy_rwlock);
 
 	policydb = &state->ss->policydb;
+	sidtab = state->ss->sidtab;
 
 	c = policydb->ocontexts[OCON_IBPKEY];
 	while (c) {
@@ -2412,7 +2373,7 @@ int security_ib_pkey_sid(struct selinux_state *state,
 
 	if (c) {
 		if (!c->sid[0]) {
-			rc = context_struct_to_sid(state,
+			rc = sidtab_context_to_sid(sidtab,
 						   &c->context[0],
 						   &c->sid[0]);
 			if (rc)
@@ -2437,12 +2398,14 @@ int security_ib_endport_sid(struct selinux_state *state,
 			    const char *dev_name, u8 port_num, u32 *out_sid)
 {
 	struct policydb *policydb;
+	struct sidtab *sidtab;
 	struct ocontext *c;
 	int rc = 0;
 
 	read_lock(&state->ss->policy_rwlock);
 
 	policydb = &state->ss->policydb;
+	sidtab = state->ss->sidtab;
 
 	c = policydb->ocontexts[OCON_IBENDPORT];
 	while (c) {
@@ -2457,7 +2420,7 @@ int security_ib_endport_sid(struct selinux_state *state,
 
 	if (c) {
 		if (!c->sid[0]) {
-			rc = context_struct_to_sid(state, &c->context[0],
+			rc = sidtab_context_to_sid(sidtab, &c->context[0],
 						   &c->sid[0]);
 			if (rc)
 				goto out;
@@ -2480,12 +2443,14 @@ int security_netif_sid(struct selinux_state *state,
 		       char *name, u32 *if_sid)
 {
 	struct policydb *policydb;
+	struct sidtab *sidtab;
 	int rc = 0;
 	struct ocontext *c;
 
 	read_lock(&state->ss->policy_rwlock);
 
 	policydb = &state->ss->policydb;
+	sidtab = state->ss->sidtab;
 
 	c = policydb->ocontexts[OCON_NETIF];
 	while (c) {
@@ -2496,11 +2461,11 @@ int security_netif_sid(struct selinux_state *state,
 
 	if (c) {
 		if (!c->sid[0] || !c->sid[1]) {
-			rc = context_struct_to_sid(state, &c->context[0],
+			rc = sidtab_context_to_sid(sidtab, &c->context[0],
 						   &c->sid[0]);
 			if (rc)
 				goto out;
-			rc = context_struct_to_sid(state, &c->context[1],
+			rc = sidtab_context_to_sid(sidtab, &c->context[1],
 						   &c->sid[1]);
 			if (rc)
 				goto out;
@@ -2541,12 +2506,14 @@ int security_node_sid(struct selinux_state *state,
 		      u32 *out_sid)
 {
 	struct policydb *policydb;
+	struct sidtab *sidtab;
 	int rc;
 	struct ocontext *c;
 
 	read_lock(&state->ss->policy_rwlock);
 
 	policydb = &state->ss->policydb;
+	sidtab = state->ss->sidtab;
 
 	switch (domain) {
 	case AF_INET: {
@@ -2588,7 +2555,7 @@ int security_node_sid(struct selinux_state *state,
 
 	if (c) {
 		if (!c->sid[0]) {
-			rc = context_struct_to_sid(state,
+			rc = sidtab_context_to_sid(sidtab,
 						   &c->context[0],
 						   &c->sid[0]);
 			if (rc)
@@ -2672,17 +2639,12 @@ int security_get_user_sids(struct selinux_state *state,
 		usercon.role = i + 1;
 		ebitmap_for_each_positive_bit(&role->types, tnode, j) {
 			usercon.type = j + 1;
-			/*
-			 * The same context struct is reused here so the hash
-			 * must be reset.
-			 */
-			usercon.hash = 0;
 
 			if (mls_setup_user_range(policydb, fromcon, user,
 						 &usercon))
 				continue;
 
-			rc = context_struct_to_sid(state, &usercon, &sid);
+			rc = sidtab_context_to_sid(sidtab, &usercon, &sid);
 			if (rc)
 				goto out_unlock;
 			if (mynel < maxnel) {
@@ -2753,6 +2715,7 @@ static inline int __security_genfs_sid(struct selinux_state *state,
 				       u32 *sid)
 {
 	struct policydb *policydb = &state->ss->policydb;
+	struct sidtab *sidtab = state->ss->sidtab;
 	int len;
 	u16 sclass;
 	struct genfs *genfs;
@@ -2787,7 +2750,7 @@ static inline int __security_genfs_sid(struct selinux_state *state,
 		goto out;
 
 	if (!c->sid[0]) {
-		rc = context_struct_to_sid(state, &c->context[0], &c->sid[0]);
+		rc = sidtab_context_to_sid(sidtab, &c->context[0], &c->sid[0]);
 		if (rc)
 			goto out;
 	}
@@ -2829,6 +2792,7 @@ int security_genfs_sid(struct selinux_state *state,
 int security_fs_use(struct selinux_state *state, struct super_block *sb)
 {
 	struct policydb *policydb;
+	struct sidtab *sidtab;
 	int rc = 0;
 	struct ocontext *c;
 	struct superblock_security_struct *sbsec = sb->s_security;
@@ -2837,6 +2801,7 @@ int security_fs_use(struct selinux_state *state, struct super_block *sb)
 	read_lock(&state->ss->policy_rwlock);
 
 	policydb = &state->ss->policydb;
+	sidtab = state->ss->sidtab;
 
 	c = policydb->ocontexts[OCON_FSUSE];
 	while (c) {
@@ -2848,7 +2813,7 @@ int security_fs_use(struct selinux_state *state, struct super_block *sb)
 	if (c) {
 		sbsec->behavior = c->v.behavior;
 		if (!c->sid[0]) {
-			rc = context_struct_to_sid(state, &c->context[0],
+			rc = sidtab_context_to_sid(sidtab, &c->context[0],
 						   &c->sid[0]);
 			if (rc)
 				goto out;
@@ -3096,7 +3061,7 @@ int security_sid_mls_copy(struct selinux_state *state,
 			goto out_unlock;
 		}
 	}
-	rc = context_struct_to_sid(state, &newcon, new_sid);
+	rc = sidtab_context_to_sid(sidtab, &newcon, new_sid);
 out_unlock:
 	read_unlock(&state->ss->policy_rwlock);
 	context_destroy(&newcon);
@@ -3689,7 +3654,7 @@ int security_netlbl_secattr_to_sid(struct selinux_state *state,
 		if (!mls_context_isvalid(policydb, &ctx_new))
 			goto out_free;
 
-		rc = context_struct_to_sid(state, &ctx_new, sid);
+		rc = sidtab_context_to_sid(sidtab, &ctx_new, sid);
 		if (rc)
 			goto out_free;
 
diff --git a/security/selinux/ss/services.h b/security/selinux/ss/services.h
index e9bddf33e53d..a06f3d835216 100644
--- a/security/selinux/ss/services.h
+++ b/security/selinux/ss/services.h
@@ -8,7 +8,6 @@
 #define _SS_SERVICES_H_
 
 #include "policydb.h"
-#include "context.h"
 
 /* Mapping for a single class */
 struct selinux_mapping {
@@ -37,6 +36,4 @@ void services_compute_xperms_drivers(struct extended_perms *xperms,
 void services_compute_xperms_decision(struct extended_perms_decision *xpermd,
 					struct avtab_node *node);
 
-int context_add_hash(struct policydb *policydb, struct context *context);
-
 #endif	/* _SS_SERVICES_H_ */
diff --git a/security/selinux/ss/sidtab.c b/security/selinux/ss/sidtab.c
index f511ffccb131..eb6d27b5aeb4 100644
--- a/security/selinux/ss/sidtab.c
+++ b/security/selinux/ss/sidtab.c
@@ -54,14 +54,15 @@ int sidtab_init(struct sidtab *s)
 	return 0;
 }
 
-static u32 context_to_sid(struct sidtab *s, struct context *context)
+static u32 context_to_sid(struct sidtab *s, struct context *context, u32 hash)
 {
 	struct sidtab_entry *entry;
 	u32 sid = 0;
 
 	rcu_read_lock();
-	hash_for_each_possible_rcu(s->context_to_sid, entry, list,
-				   context->hash) {
+	hash_for_each_possible_rcu(s->context_to_sid, entry, list, hash) {
+		if (entry->hash != hash)
+			continue;
 		if (context_cmp(&entry->context, context)) {
 			sid = entry->sid;
 			break;
@@ -74,6 +75,7 @@ static u32 context_to_sid(struct sidtab *s, struct context *context)
 int sidtab_set_initial(struct sidtab *s, u32 sid, struct context *context)
 {
 	struct sidtab_isid_entry *isid;
+	u32 hash;
 	int rc;
 
 	if (sid == 0 || sid > SECINITSID_NUM)
@@ -90,15 +92,18 @@ int sidtab_set_initial(struct sidtab *s, u32 sid, struct context *context)
 #endif
 	isid->set = 1;
 
+	hash = context_compute_hash(context);
+
 	/*
 	 * Multiple initial sids may map to the same context. Check that this
 	 * context is not already represented in the context_to_sid hashtable
 	 * to avoid duplicate entries and long linked lists upon hash
 	 * collision.
 	 */
-	if (!context_to_sid(s, context)) {
+	if (!context_to_sid(s, context, hash)) {
 		isid->entry.sid = sid;
-		hash_add(s->context_to_sid, &isid->entry.list, context->hash);
+		isid->entry.hash = hash;
+		hash_add(s->context_to_sid, &isid->entry.list, hash);
 	}
 
 	return 0;
@@ -259,12 +264,12 @@ int sidtab_context_to_sid(struct sidtab *s, struct context *context,
 			  u32 *sid)
 {
 	unsigned long flags;
-	u32 count;
+	u32 count, hash = context_compute_hash(context);
 	struct sidtab_convert_params *convert;
 	struct sidtab_entry *dst, *dst_convert;
 	int rc;
 
-	*sid = context_to_sid(s, context);
+	*sid = context_to_sid(s, context, hash);
 	if (*sid)
 		return 0;
 
@@ -272,12 +277,11 @@ int sidtab_context_to_sid(struct sidtab *s, struct context *context,
 	spin_lock_irqsave(&s->lock, flags);
 
 	rc = 0;
-	*sid = context_to_sid(s, context);
+	*sid = context_to_sid(s, context, hash);
 	if (*sid)
 		goto out_unlock;
 
-	/* read entries only after reading count */
-	count = smp_load_acquire(&s->count);
+	count = s->count;
 	convert = s->convert;
 
 	/* bail out if we already reached max entries */
@@ -292,6 +296,7 @@ int sidtab_context_to_sid(struct sidtab *s, struct context *context,
 		goto out_unlock;
 
 	dst->sid = index_to_sid(count);
+	dst->hash = hash;
 
 	rc = context_cpy(&dst->context, context);
 	if (rc)
@@ -316,10 +321,11 @@ int sidtab_context_to_sid(struct sidtab *s, struct context *context,
 			goto out_unlock;
 		}
 		dst_convert->sid = index_to_sid(count);
+		dst_convert->hash = context_compute_hash(&dst_convert->context);
 		convert->target->count = count + 1;
 
 		hash_add_rcu(convert->target->context_to_sid,
-			     &dst_convert->list, dst_convert->context.hash);
+			     &dst_convert->list, dst_convert->hash);
 	}
 
 	if (context->len)
@@ -330,7 +336,7 @@ int sidtab_context_to_sid(struct sidtab *s, struct context *context,
 
 	/* write entries before updating count */
 	smp_store_release(&s->count, count + 1);
-	hash_add_rcu(s->context_to_sid, &dst->list, dst->context.hash);
+	hash_add_rcu(s->context_to_sid, &dst->list, dst->hash);
 
 	rc = 0;
 out_unlock:
@@ -346,10 +352,9 @@ static void sidtab_convert_hashtable(struct sidtab *s, u32 count)
 	for (i = 0; i < count; i++) {
 		entry = sidtab_do_lookup(s, i, 0);
 		entry->sid = index_to_sid(i);
+		entry->hash = context_compute_hash(&entry->context);
 
-		hash_add_rcu(s->context_to_sid, &entry->list,
-			     entry->context.hash);
-
+		hash_add_rcu(s->context_to_sid, &entry->list, entry->hash);
 	}
 }
 
diff --git a/security/selinux/ss/sidtab.h b/security/selinux/ss/sidtab.h
index 3311d9f236c0..f2a84560b8b3 100644
--- a/security/selinux/ss/sidtab.h
+++ b/security/selinux/ss/sidtab.h
@@ -19,6 +19,7 @@
 
 struct sidtab_entry {
 	u32 sid;
+	u32 hash;
 	struct context context;
 #if CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE > 0
 	struct sidtab_str_cache __rcu *cache;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 8c61d175e195..2862fc383473 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -41,6 +41,7 @@
 #include <linux/parser.h>
 #include <linux/fs_context.h>
 #include <linux/fs_parser.h>
+#include <linux/watch_queue.h>
 #include "smack.h"
 
 #define TRANS_TRUE	"TRUE"
@@ -4265,7 +4266,7 @@ static int smack_key_permission(key_ref_t key_ref,
 	if (tkp == NULL)
 		return -EACCES;
 
-	if (smack_privileged_cred(CAP_MAC_OVERRIDE, cred))
+	if (smack_privileged(CAP_MAC_OVERRIDE))
 		return 0;
 
 #ifdef CONFIG_AUDIT
@@ -4311,8 +4312,81 @@ static int smack_key_getsecurity(struct key *key, char **_buffer)
 	return length;
 }
 
+
+#ifdef CONFIG_KEY_NOTIFICATIONS
+/**
+ * smack_watch_key - Smack access to watch a key for notifications.
+ * @key: The key to be watched
+ *
+ * Return 0 if the @watch->cred has permission to read from the key object and
+ * an error otherwise.
+ */
+static int smack_watch_key(struct key *key)
+{
+	struct smk_audit_info ad;
+	struct smack_known *tkp = smk_of_current();
+	int rc;
+
+	if (key == NULL)
+		return -EINVAL;
+	/*
+	 * If the key hasn't been initialized give it access so that
+	 * it may do so.
+	 */
+	if (key->security == NULL)
+		return 0;
+	/*
+	 * This should not occur
+	 */
+	if (tkp == NULL)
+		return -EACCES;
+
+	if (smack_privileged_cred(CAP_MAC_OVERRIDE, current_cred()))
+		return 0;
+
+#ifdef CONFIG_AUDIT
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_KEY);
+	ad.a.u.key_struct.key = key->serial;
+	ad.a.u.key_struct.key_desc = key->description;
+#endif
+	rc = smk_access(tkp, key->security, MAY_READ, &ad);
+	rc = smk_bu_note("key watch", tkp, key->security, MAY_READ, rc);
+	return rc;
+}
+#endif /* CONFIG_KEY_NOTIFICATIONS */
 #endif /* CONFIG_KEYS */
 
+#ifdef CONFIG_WATCH_QUEUE
+/**
+ * smack_post_notification - Smack access to post a notification to a queue
+ * @w_cred: The credentials of the watcher.
+ * @cred: The credentials of the event source (may be NULL).
+ * @n: The notification message to be posted.
+ */
+static int smack_post_notification(const struct cred *w_cred,
+				   const struct cred *cred,
+				   struct watch_notification *n)
+{
+	struct smk_audit_info ad;
+	struct smack_known *subj, *obj;
+	int rc;
+
+	/* Always let maintenance notifications through. */
+	if (n->type == WATCH_TYPE_META)
+		return 0;
+
+	if (!cred)
+		return 0;
+	subj = smk_of_task(smack_cred(cred));
+	obj = smk_of_task(smack_cred(w_cred));
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NOTIFICATION);
+	rc = smk_access(subj, obj, MAY_WRITE, &ad);
+	rc = smk_bu_note("notification", subj, obj, MAY_WRITE, rc);
+	return rc;
+}
+#endif /* CONFIG_WATCH_QUEUE */
+
 /*
  * Smack Audit hooks
  *
@@ -4701,8 +4775,15 @@ static struct security_hook_list smack_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(key_free, smack_key_free),
 	LSM_HOOK_INIT(key_permission, smack_key_permission),
 	LSM_HOOK_INIT(key_getsecurity, smack_key_getsecurity),
+#ifdef CONFIG_KEY_NOTIFICATIONS
+	LSM_HOOK_INIT(watch_key, smack_watch_key),
+#endif
 #endif /* CONFIG_KEYS */
 
+#ifdef CONFIG_WATCH_QUEUE
+	LSM_HOOK_INIT(post_notification, smack_post_notification),
+#endif
+
  /* Audit hooks */
 #ifdef CONFIG_AUDIT
 	LSM_HOOK_INIT(audit_rule_init, smack_audit_rule_init),
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index bf38fc1b59b2..08b096e2f7e3 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -7,6 +7,7 @@
 
 #include "common.h"
 #include <linux/magic.h>
+#include <linux/proc_fs.h>
 
 /**
  * tomoyo_encode2 - Encode binary string to ascii string.
@@ -161,9 +162,10 @@ static char *tomoyo_get_local_path(struct dentry *dentry, char * const buffer,
 	if (sb->s_magic == PROC_SUPER_MAGIC && *pos == '/') {
 		char *ep;
 		const pid_t pid = (pid_t) simple_strtoul(pos + 1, &ep, 10);
+		struct pid_namespace *proc_pidns = proc_pid_ns(d_inode(dentry));
 
 		if (*ep == '/' && pid && pid ==
-		    task_tgid_nr_ns(current, sb->s_fs_info)) {
+		    task_tgid_nr_ns(current, proc_pidns)) {
 			pos = ep - 5;
 			if (pos < buffer)
 				goto out;
diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c
index 94dc346370b1..536c99646f6a 100644
--- a/security/yama/yama_lsm.c
+++ b/security/yama/yama_lsm.c
@@ -430,7 +430,7 @@ static struct security_hook_list yama_hooks[] __lsm_ro_after_init = {
 
 #ifdef CONFIG_SYSCTL
 static int yama_dointvec_minmax(struct ctl_table *table, int write,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+				void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table table_copy;
 
diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c
index a83553fbedf0..bea46ed157a6 100644
--- a/sound/core/memalloc.c
+++ b/sound/core/memalloc.c
@@ -143,7 +143,7 @@ int snd_dma_alloc_pages(int type, struct device *device, size_t size,
 		break;
 	case SNDRV_DMA_TYPE_VMALLOC:
 		gfp = snd_mem_get_gfp_flags(device, GFP_KERNEL | __GFP_HIGHMEM);
-		dmab->area = __vmalloc(size, gfp, PAGE_KERNEL);
+		dmab->area = __vmalloc(size, gfp);
 		dmab->addr = 0;
 		break;
 #ifdef CONFIG_HAS_DMA
diff --git a/sound/core/oss/pcm_plugin.c b/sound/core/oss/pcm_plugin.c
index 59d62f05658f..1545f8fdb4db 100644
--- a/sound/core/oss/pcm_plugin.c
+++ b/sound/core/oss/pcm_plugin.c
@@ -205,13 +205,14 @@ static snd_pcm_sframes_t calc_dst_frames(struct snd_pcm_substream *plug,
 	plugin = snd_pcm_plug_first(plug);
 	while (plugin && frames > 0) {
 		plugin_next = plugin->next;
+		if (check_size && plugin->buf_frames &&
+		    frames > plugin->buf_frames)
+			frames = plugin->buf_frames;
 		if (plugin->dst_frames) {
 			frames = plugin->dst_frames(plugin, frames);
 			if (frames < 0)
 				return frames;
 		}
-		if (check_size && frames > plugin->buf_frames)
-			frames = plugin->buf_frames;
 		plugin = plugin_next;
 	}
 	return frames;
@@ -225,14 +226,15 @@ static snd_pcm_sframes_t calc_src_frames(struct snd_pcm_substream *plug,
 
 	plugin = snd_pcm_plug_last(plug);
 	while (plugin && frames > 0) {
-		if (check_size && frames > plugin->buf_frames)
-			frames = plugin->buf_frames;
 		plugin_prev = plugin->prev;
 		if (plugin->src_frames) {
 			frames = plugin->src_frames(plugin, frames);
 			if (frames < 0)
 				return frames;
 		}
+		if (check_size && plugin->buf_frames &&
+		    frames > plugin->buf_frames)
+			frames = plugin->buf_frames;
 		plugin = plugin_prev;
 	}
 	return frames;
diff --git a/sound/core/oss/pcm_plugin.h b/sound/core/oss/pcm_plugin.h
index 8d2f7a4e3ab6..46e273bd4a78 100644
--- a/sound/core/oss/pcm_plugin.h
+++ b/sound/core/oss/pcm_plugin.h
@@ -64,7 +64,7 @@ struct snd_pcm_plugin {
 	char *buf;
 	snd_pcm_uframes_t buf_frames;
 	struct snd_pcm_plugin_channel *buf_channels;
-	char extra_data[0];
+	char extra_data[];
 };
 
 int snd_pcm_plugin_build(struct snd_pcm_substream *handle,
diff --git a/sound/core/pcm_memory.c b/sound/core/pcm_memory.c
index fcab37ea6641..860935e3aea4 100644
--- a/sound/core/pcm_memory.c
+++ b/sound/core/pcm_memory.c
@@ -460,7 +460,7 @@ int _snd_pcm_lib_alloc_vmalloc_buffer(struct snd_pcm_substream *substream,
 			return 0; /* already large enough */
 		vfree(runtime->dma_area);
 	}
-	runtime->dma_area = __vmalloc(size, gfp_flags, PAGE_KERNEL);
+	runtime->dma_area = __vmalloc(size, gfp_flags);
 	if (!runtime->dma_area)
 		return -ENOMEM;
 	runtime->dma_bytes = size;
diff --git a/sound/core/seq/oss/seq_oss_timer.h b/sound/core/seq/oss/seq_oss_timer.h
index 2d86125b5d0f..dee190b4ec6b 100644
--- a/sound/core/seq/oss/seq_oss_timer.h
+++ b/sound/core/seq/oss/seq_oss_timer.h
@@ -44,14 +44,4 @@ snd_seq_oss_timer_cur_tick(struct seq_oss_timer *timer)
 	return timer->cur_tick;
 }
 
-
-/*
- * is realtime event?
- */
-static inline int
-snd_seq_oss_timer_is_realtime(struct seq_oss_timer *timer)
-{
-	return timer->realtime;
-}
-
 #endif
diff --git a/sound/firewire/fireworks/fireworks.h b/sound/firewire/fireworks/fireworks.h
index dda797209a27..654e28a6669f 100644
--- a/sound/firewire/fireworks/fireworks.h
+++ b/sound/firewire/fireworks/fireworks.h
@@ -177,7 +177,7 @@ struct snd_efw_phys_meters {
 	u32 in_meters;
 	u32 reserved4;
 	u32 reserved5;
-	u32 values[0];
+	u32 values[];
 } __packed;
 enum snd_efw_clock_source {
 	SND_EFW_CLOCK_SOURCE_INTERNAL	= 0,
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c
index be1df80ed013..1c1fdab2a55f 100644
--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2019 Jaroslav Kysela <perex@perex.cz>
 
+#include <linux/acpi.h>
 #include <linux/bits.h>
 #include <linux/dmi.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_intel.h>
 #include <sound/core.h>
 #include <sound/intel-dsp-config.h>
 #include <sound/intel-nhlt.h>
@@ -14,9 +17,13 @@ static int dsp_driver;
 module_param(dsp_driver, int, 0444);
 MODULE_PARM_DESC(dsp_driver, "Force the DSP driver for Intel DSP (0=auto, 1=legacy, 2=SST, 3=SOF)");
 
-#define FLAG_SST		BIT(0)
-#define FLAG_SOF		BIT(1)
-#define FLAG_SOF_ONLY_IF_DMIC	BIT(16)
+#define FLAG_SST			BIT(0)
+#define FLAG_SOF			BIT(1)
+#define FLAG_SOF_ONLY_IF_DMIC		BIT(16)
+#define FLAG_SOF_ONLY_IF_SOUNDWIRE	BIT(17)
+
+#define FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE (FLAG_SOF_ONLY_IF_DMIC | \
+					    FLAG_SOF_ONLY_IF_SOUNDWIRE)
 
 struct config_entry {
 	u32 flags;
@@ -166,7 +173,7 @@ static const struct config_entry config_table[] = {
 		}
 	},
 	{
-		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC,
+		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
 		.device = 0x9dc8,
 	},
 #endif
@@ -187,7 +194,7 @@ static const struct config_entry config_table[] = {
 		}
 	},
 	{
-		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC,
+		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
 		.device = 0xa348,
 	},
 #endif
@@ -204,18 +211,50 @@ static const struct config_entry config_table[] = {
 					DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 				}
 			},
+			{
+				.matches = {
+					DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+					DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "09C6")
+				},
+			},
+			{
+				/* early version of SKU 09C6 */
+				.matches = {
+					DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+					DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0983")
+				},
+			},
 			{}
 		}
 	},
 	{
-		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC,
+		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
 		.device = 0x02c8,
 	},
 #endif
 /* Cometlake-H */
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_H)
 	{
-		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC,
+		.flags = FLAG_SOF,
+		.device = 0x06c8,
+		.dmi_table = (const struct dmi_system_id []) {
+			{
+				.matches = {
+					DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+					DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "098F"),
+				},
+			},
+			{
+				.matches = {
+					DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+					DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0990"),
+				},
+			},
+			{}
+		}
+	},
+	{
+		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
 		.device = 0x06c8,
 	},
 #endif
@@ -236,7 +275,7 @@ static const struct config_entry config_table[] = {
 		}
 	},
 	{
-		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC,
+		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
 		.device = 0x34c8,
 	},
 #endif
@@ -256,9 +295,8 @@ static const struct config_entry config_table[] = {
 			{}
 		}
 	},
-
 	{
-		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC,
+		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
 		.device = 0xa0c8,
 	},
 #endif
@@ -303,6 +341,28 @@ static int snd_intel_dsp_check_dmic(struct pci_dev *pci)
 	return ret;
 }
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE)
+static int snd_intel_dsp_check_soundwire(struct pci_dev *pci)
+{
+	struct sdw_intel_acpi_info info;
+	acpi_handle handle;
+	int ret;
+
+	handle = ACPI_HANDLE(&pci->dev);
+
+	ret = sdw_intel_acpi_scan(handle, &info);
+	if (ret < 0)
+		return ret;
+
+	return info.link_mask;
+}
+#else
+static int snd_intel_dsp_check_soundwire(struct pci_dev *pci)
+{
+	return 0;
+}
+#endif
+
 int snd_intel_dsp_driver_probe(struct pci_dev *pci)
 {
 	const struct config_entry *cfg;
@@ -336,14 +396,18 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci)
 		return SND_INTEL_DSP_DRIVER_ANY;
 
 	if (cfg->flags & FLAG_SOF) {
-		if (cfg->flags & FLAG_SOF_ONLY_IF_DMIC) {
-			if (snd_intel_dsp_check_dmic(pci)) {
-				dev_info(&pci->dev, "Digital mics found on Skylake+ platform, using SOF driver\n");
-				return SND_INTEL_DSP_DRIVER_SOF;
-			}
-		} else {
+		if (cfg->flags & FLAG_SOF_ONLY_IF_SOUNDWIRE &&
+		    snd_intel_dsp_check_soundwire(pci) > 0) {
+			dev_info(&pci->dev, "SoundWire enabled on CannonLake+ platform, using SOF driver\n");
+			return SND_INTEL_DSP_DRIVER_SOF;
+		}
+		if (cfg->flags & FLAG_SOF_ONLY_IF_DMIC &&
+		    snd_intel_dsp_check_dmic(pci)) {
+			dev_info(&pci->dev, "Digital mics found on Skylake+ platform, using SOF driver\n");
 			return SND_INTEL_DSP_DRIVER_SOF;
 		}
+		if (!(cfg->flags & FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE))
+			return SND_INTEL_DSP_DRIVER_SOF;
 	}
 
 	if (cfg->flags & FLAG_SST)
@@ -355,3 +419,4 @@ EXPORT_SYMBOL_GPL(snd_intel_dsp_driver_probe);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Intel DSP config driver");
+MODULE_IMPORT_NS(SOUNDWIRE_INTEL_INIT);
diff --git a/sound/hda/intel-nhlt.c b/sound/hda/intel-nhlt.c
index 99a23fe7fab9..2f741d2792d8 100644
--- a/sound/hda/intel-nhlt.c
+++ b/sound/hda/intel-nhlt.c
@@ -4,58 +4,25 @@
 #include <linux/acpi.h>
 #include <sound/intel-nhlt.h>
 
-#define NHLT_ACPI_HEADER_SIG	"NHLT"
-
-/* Unique identification for getting NHLT blobs */
-static const guid_t osc_guid =
-	GUID_INIT(0xA69F886E, 0x6CEB, 0x4594,
-		  0xA4, 0x1F, 0x7B, 0x5D, 0xCE, 0x24, 0xC5, 0x53);
-
 struct nhlt_acpi_table *intel_nhlt_init(struct device *dev)
 {
-	acpi_handle handle;
-	union acpi_object *obj;
-	struct nhlt_resource_desc *nhlt_ptr;
-	struct nhlt_acpi_table *nhlt_table = NULL;
-
-	handle = ACPI_HANDLE(dev);
-	if (!handle) {
-		dev_err(dev, "Didn't find ACPI_HANDLE\n");
-		return NULL;
-	}
+	struct nhlt_acpi_table *nhlt;
+	acpi_status status;
 
-	obj = acpi_evaluate_dsm(handle, &osc_guid, 1, 1, NULL);
-
-	if (!obj)
-		return NULL;
-
-	if (obj->type != ACPI_TYPE_BUFFER) {
-		dev_dbg(dev, "No NHLT table found\n");
-		ACPI_FREE(obj);
+	status = acpi_get_table(ACPI_SIG_NHLT, 0,
+				(struct acpi_table_header **)&nhlt);
+	if (ACPI_FAILURE(status)) {
+		dev_warn(dev, "NHLT table not found\n");
 		return NULL;
 	}
 
-	nhlt_ptr = (struct nhlt_resource_desc  *)obj->buffer.pointer;
-	if (nhlt_ptr->length)
-		nhlt_table = (struct nhlt_acpi_table *)
-			memremap(nhlt_ptr->min_addr, nhlt_ptr->length,
-				 MEMREMAP_WB);
-	ACPI_FREE(obj);
-	if (nhlt_table &&
-	    (strncmp(nhlt_table->header.signature,
-		     NHLT_ACPI_HEADER_SIG,
-		     strlen(NHLT_ACPI_HEADER_SIG)) != 0)) {
-		memunmap(nhlt_table);
-		dev_err(dev, "NHLT ACPI header signature incorrect\n");
-		return NULL;
-	}
-	return nhlt_table;
+	return nhlt;
 }
 EXPORT_SYMBOL_GPL(intel_nhlt_init);
 
 void intel_nhlt_free(struct nhlt_acpi_table *nhlt)
 {
-	memunmap((void *)nhlt);
+	acpi_put_table((struct acpi_table_header *)nhlt);
 }
 EXPORT_SYMBOL_GPL(intel_nhlt_free);
 
diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c
index ce4c8ba2fa98..ca18fe3ff8a5 100644
--- a/sound/isa/ad1816a/ad1816a.c
+++ b/sound/isa/ad1816a/ad1816a.c
@@ -54,7 +54,7 @@ MODULE_PARM_DESC(clockfreq, "Clock frequency for ad1816a driver (default = 0).")
 static const struct pnp_card_device_id snd_ad1816a_pnpids[] = {
 	/* Analog Devices AD1815 */
 	{ .id = "ADS7150", .devs = { { .id = "ADS7150" }, { .id = "ADS7151" } } },
-	/* Analog Device AD1816? */
+	/* Analog Devices AD1816? */
 	{ .id = "ADS7180", .devs = { { .id = "ADS7180" }, { .id = "ADS7181" } } },
 	/* Analog Devices AD1816A - added by Kenneth Platz <kxp@atl.hp.com> */
 	{ .id = "ADS7181", .devs = { { .id = "ADS7180" }, { .id = "ADS7181" } } },
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index ebf926728c5f..45ef0f52ec55 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1356,7 +1356,7 @@ static int patch_cx20551(struct snd_ac97 *ac97)
 }
 
 /*
- * Analog Device AD18xx, AD19xx codecs
+ * Analog Devices AD18xx, AD19xx codecs
  */
 #ifdef CONFIG_PM
 static void ad18xx_resume(struct snd_ac97 *ac97)
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index e1d3082a4fe9..7ba542e45a3d 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -99,10 +99,10 @@ comment "Set to Y if you want auto-loading the codec driver"
 	depends on SND_HDA=y && SND_HDA_CODEC_REALTEK=m
 
 config SND_HDA_CODEC_ANALOG
-	tristate "Build Analog Device HD-audio codec support"
+	tristate "Build Analog Devices HD-audio codec support"
 	select SND_HDA_GENERIC
 	help
-	  Say Y or M here to include Analog Device HD-audio codec support in
+	  Say Y or M here to include Analog Devices HD-audio codec support in
 	  snd-hda-intel driver, such as AD1986A.
 
 comment "Set to Y if you want auto-loading the codec driver"
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 457a2c065485..0310193ea1bd 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2078,9 +2078,10 @@ static void pcm_mmap_prepare(struct snd_pcm_substream *substream,
  * some HD-audio PCI entries are exposed without any codecs, and such devices
  * should be ignored from the beginning.
  */
-static const struct snd_pci_quirk driver_blacklist[] = {
-	SND_PCI_QUIRK(0x1462, 0xcb59, "MSI TRX40 Creator", 0),
-	SND_PCI_QUIRK(0x1462, 0xcb60, "MSI TRX40", 0),
+static const struct pci_device_id driver_blacklist[] = {
+	{ PCI_DEVICE_SUB(0x1022, 0x1487, 0x1043, 0x874f) }, /* ASUS ROG Zenith II / Strix */
+	{ PCI_DEVICE_SUB(0x1022, 0x1487, 0x1462, 0xcb59) }, /* MSI TRX40 Creator */
+	{ PCI_DEVICE_SUB(0x1022, 0x1487, 0x1462, 0xcb60) }, /* MSI TRX40 */
 	{}
 };
 
@@ -2100,7 +2101,7 @@ static int azx_probe(struct pci_dev *pci,
 	bool schedule_probe;
 	int err;
 
-	if (snd_pci_quirk_lookup(pci, driver_blacklist)) {
+	if (pci_match_id(driver_blacklist, pci)) {
 		dev_info(&pci->dev, "Skipping the blacklisted device\n");
 		return -ENODEV;
 	}
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 4eff16053bd5..07be1b197566 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1848,8 +1848,10 @@ static bool check_non_pcm_per_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
 	/* Add sanity check to pass klockwork check.
 	 * This should never happen.
 	 */
-	if (WARN_ON(spdif == NULL))
+	if (WARN_ON(spdif == NULL)) {
+		mutex_unlock(&codec->spdif_mutex);
 		return true;
+	}
 	non_pcm = !!(spdif->status & IEC958_AES0_NONAUDIO);
 	mutex_unlock(&codec->spdif_mutex);
 	return non_pcm;
@@ -2198,7 +2200,9 @@ static int generic_hdmi_build_controls(struct hda_codec *codec)
 
 	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
 		struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
+		struct hdmi_eld *pin_eld = &per_pin->sink_eld;
 
+		pin_eld->eld_valid = false;
 		hdmi_present_sense(per_pin, 0);
 	}
 
@@ -4165,6 +4169,7 @@ HDA_CODEC_ENTRY(0x8086280d, "Geminilake HDMI",	patch_i915_glk_hdmi),
 HDA_CODEC_ENTRY(0x8086280f, "Icelake HDMI",	patch_i915_icl_hdmi),
 HDA_CODEC_ENTRY(0x80862812, "Tigerlake HDMI",	patch_i915_tgl_hdmi),
 HDA_CODEC_ENTRY(0x8086281a, "Jasperlake HDMI",	patch_i915_icl_hdmi),
+HDA_CODEC_ENTRY(0x8086281b, "Elkhartlake HDMI",	patch_i915_icl_hdmi),
 HDA_CODEC_ENTRY(0x80862880, "CedarTrail HDMI",	patch_generic_hdmi),
 HDA_CODEC_ENTRY(0x80862882, "Valleyview2 HDMI",	patch_i915_byt_hdmi),
 HDA_CODEC_ENTRY(0x80862883, "Braswell HDMI",	patch_i915_byt_hdmi),
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c1a85c8f7b69..c16f63957c5a 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7420,6 +7420,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1558, 0x8560, "System76 Gazelle (gaze14)", ALC269_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1558, 0x8561, "System76 Gazelle (gaze14)", ALC269_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC233_FIXUP_LENOVO_MULTI_CODECS),
+	SND_PCI_QUIRK(0x17aa, 0x1048, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x17aa, 0x215e, "Thinkpad L512", ALC269_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
diff --git a/sound/pci/oxygen/xonar_pcm179x.c b/sound/pci/oxygen/xonar_pcm179x.c
index 6a0520c4fb5a..cf801a235df9 100644
--- a/sound/pci/oxygen/xonar_pcm179x.c
+++ b/sound/pci/oxygen/xonar_pcm179x.c
@@ -460,7 +460,7 @@ static void xonar_st_init(struct oxygen *chip)
 
 	data->generic.anti_pop_delay = 100;
 	data->h6 = chip->model.dac_channels_mixer > 2;
-	data->has_cs2000 = 1;
+	data->has_cs2000 = true;
 	data->cs2000_regs[CS2000_FUN_CFG_1] = CS2000_REF_CLK_DIV_1;
 	data->broken_i2c = true;
 
@@ -502,7 +502,7 @@ static void xonar_xense_init(struct oxygen *chip)
 	xonar_init_ext_power(chip);
 
 	data->generic.anti_pop_delay = 100;
-	data->has_cs2000 = 1;
+	data->has_cs2000 = true;
 	data->cs2000_regs[CS2000_FUN_CFG_1] = CS2000_REF_CLK_DIV_1;
 
 	oxygen_write16(chip, OXYGEN_I2S_A_FORMAT,
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index e60e0b6a689c..44b8c4cde4f3 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -272,6 +272,7 @@ config SND_SOC_ALL_CODECS
 	imply SND_SOC_WM9712
 	imply SND_SOC_WM9713
 	imply SND_SOC_WSA881X
+	imply SND_SOC_ZL38060
 	help
 	  Normally ASoC codec drivers are only built if a machine driver which
 	  uses them is also built since they are only usable with a machine
@@ -717,7 +718,7 @@ config SND_SOC_L3
 
 config SND_SOC_DA7210
 	tristate
-	depends on I2C
+	depends on SND_SOC_I2C_AND_SPI
 
 config SND_SOC_DA7213
 	tristate "Dialog DA7213 CODEC"
@@ -1136,10 +1137,13 @@ config SND_SOC_RT5677_SPI
 config SND_SOC_RT5682
 	tristate
 	depends on I2C || SOUNDWIRE
+	depends on SOUNDWIRE || !SOUNDWIRE
+	depends on I2C || !I2C
 
 config SND_SOC_RT5682_SDW
 	tristate "Realtek RT5682 Codec - SDW"
 	depends on SOUNDWIRE
+	depends on I2C || !I2C
 	select SND_SOC_RT5682
 	select REGMAP_SOUNDWIRE
 
@@ -1569,7 +1573,7 @@ config SND_SOC_WM8978
 
 config SND_SOC_WM8983
 	tristate
-	depends on I2C
+	depends on SND_SOC_I2C_AND_SPI
 
 config SND_SOC_WM8985
 	tristate "Wolfson Microelectronics WM8985 and WM8758 codec driver"
@@ -1620,19 +1624,19 @@ config SND_SOC_WM9090
 
 config SND_SOC_WM9705
 	tristate
-	depends on SND_SOC_AC97_BUS
+	depends on SND_SOC_AC97_BUS || AC97_BUS_NEW
 	select REGMAP_AC97
 	select AC97_BUS_COMPAT if AC97_BUS_NEW
 
 config SND_SOC_WM9712
 	tristate
-	depends on SND_SOC_AC97_BUS
+	depends on SND_SOC_AC97_BUS || AC97_BUS_NEW
 	select REGMAP_AC97
 	select AC97_BUS_COMPAT if AC97_BUS_NEW
 
 config SND_SOC_WM9713
 	tristate
-	depends on SND_SOC_AC97_BUS
+	depends on SND_SOC_AC97_BUS || AC97_BUS_NEW
 	select REGMAP_AC97
 	select AC97_BUS_COMPAT if AC97_BUS_NEW
 
@@ -1645,6 +1649,16 @@ config SND_SOC_WSA881X
 	  This enables support for Qualcomm WSA8810/WSA8815 Class-D
 	  Smart Speaker Amplifier.
 
+config SND_SOC_ZL38060
+	tristate "Microsemi ZL38060 Connected Home Audio Processor"
+	depends on SPI_MASTER
+	select GPIOLIB
+	select REGMAP
+	help
+	  Support for ZL38060 Connected Home Audio Processor from Microsemi,
+	  which consists of a Digital Signal Processor (DSP), several Digital
+	  Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
+
 config SND_SOC_ZX_AUD96P22
 	tristate "ZTE ZX AUD96P22 CODEC"
 	depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 03533157cda6..a603532c7af5 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -288,6 +288,7 @@ snd-soc-wm9712-objs := wm9712.o
 snd-soc-wm9713-objs := wm9713.o
 snd-soc-wm-hubs-objs := wm_hubs.o
 snd-soc-wsa881x-objs := wsa881x.o
+snd-soc-zl38060-objs := zl38060.o
 snd-soc-zx-aud96p22-objs := zx_aud96p22.o
 # Amp
 snd-soc-max9877-objs := max9877.o
@@ -588,6 +589,7 @@ obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
 obj-$(CONFIG_SND_SOC_WM_ADSP)	+= snd-soc-wm-adsp.o
 obj-$(CONFIG_SND_SOC_WM_HUBS)	+= snd-soc-wm-hubs.o
 obj-$(CONFIG_SND_SOC_WSA881X)	+= snd-soc-wsa881x.o
+obj-$(CONFIG_SND_SOC_ZL38060)	+= snd-soc-zl38060.o
 obj-$(CONFIG_SND_SOC_ZX_AUD96P22) += snd-soc-zx-aud96p22.o
 
 # Amp
diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
index c4414c725c1f..43b1337bac37 100644
--- a/sound/soc/codecs/ad1980.c
+++ b/sound/soc/codecs/ad1980.c
@@ -2,7 +2,7 @@
 /*
  * ad1980.c  --  ALSA Soc AD1980 codec support
  *
- * Copyright:	Analog Device Inc.
+ * Copyright:	Analog Devices Inc.
  * Author:	Roy Huang <roy.huang@analog.com>
  * 		Cliff Cai <cliff.cai@analog.com>
  */
diff --git a/sound/soc/codecs/ad73311.c b/sound/soc/codecs/ad73311.c
index 10daf61f0294..b98bf19f594e 100644
--- a/sound/soc/codecs/ad73311.c
+++ b/sound/soc/codecs/ad73311.c
@@ -2,7 +2,7 @@
 /*
  * ad73311.c  --  ALSA Soc AD73311 codec support
  *
- * Copyright:	Analog Device Inc.
+ * Copyright:	Analog Devices Inc.
  * Author:	Cliff Cai <cliff.cai@analog.com>
  */
 
diff --git a/sound/soc/codecs/cs47l15.c b/sound/soc/codecs/cs47l15.c
index 8d1869bf7f9c..402c6b7c7014 100644
--- a/sound/soc/codecs/cs47l15.c
+++ b/sound/soc/codecs/cs47l15.c
@@ -1229,11 +1229,10 @@ static struct snd_soc_dai_driver cs47l15_dai[] = {
 	},
 };
 
-static int cs47l15_open(struct snd_compr_stream *stream)
+static int cs47l15_open(struct snd_soc_component *component,
+			struct snd_compr_stream *stream)
 {
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct cs47l15 *cs47l15 = snd_soc_component_get_drvdata(component);
 	struct madera_priv *priv = &cs47l15->core;
 	struct madera *madera = priv->madera;
@@ -1329,7 +1328,7 @@ static unsigned int cs47l15_digital_vu[] = {
 	MADERA_DAC_DIGITAL_VOLUME_5R,
 };
 
-static const struct snd_compr_ops cs47l15_compr_ops = {
+static const struct snd_compress_ops cs47l15_compress_ops = {
 	.open = &cs47l15_open,
 	.free = &wm_adsp_compr_free,
 	.set_params = &wm_adsp_compr_set_params,
@@ -1345,7 +1344,7 @@ static const struct snd_soc_component_driver soc_component_dev_cs47l15 = {
 	.set_sysclk		= &madera_set_sysclk,
 	.set_pll		= &cs47l15_set_fll,
 	.name			= DRV_NAME,
-	.compr_ops		= &cs47l15_compr_ops,
+	.compress_ops		= &cs47l15_compress_ops,
 	.controls		= cs47l15_snd_controls,
 	.num_controls		= ARRAY_SIZE(cs47l15_snd_controls),
 	.dapm_widgets		= cs47l15_dapm_widgets,
diff --git a/sound/soc/codecs/cs47l24.c b/sound/soc/codecs/cs47l24.c
index 6b0570f59630..f6d173d0120e 100644
--- a/sound/soc/codecs/cs47l24.c
+++ b/sound/soc/codecs/cs47l24.c
@@ -1068,10 +1068,10 @@ static struct snd_soc_dai_driver cs47l24_dai[] = {
 	},
 };
 
-static int cs47l24_open(struct snd_compr_stream *stream)
+static int cs47l24_open(struct snd_soc_component *component,
+			struct snd_compr_stream *stream)
 {
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct cs47l24_priv *priv = snd_soc_component_get_drvdata(component);
 	struct arizona *arizona = priv->core.arizona;
 	int n_adsp;
@@ -1178,7 +1178,7 @@ static unsigned int cs47l24_digital_vu[] = {
 	ARIZONA_DAC_DIGITAL_VOLUME_4L,
 };
 
-static struct snd_compr_ops cs47l24_compr_ops = {
+static struct snd_compress_ops cs47l24_compress_ops = {
 	.open		= cs47l24_open,
 	.free		= wm_adsp_compr_free,
 	.set_params	= wm_adsp_compr_set_params,
@@ -1194,7 +1194,7 @@ static const struct snd_soc_component_driver soc_component_dev_cs47l24 = {
 	.set_sysclk		= arizona_set_sysclk,
 	.set_pll		= cs47l24_set_fll,
 	.name			= DRV_NAME,
-	.compr_ops		= &cs47l24_compr_ops,
+	.compress_ops		= &cs47l24_compress_ops,
 	.controls		= cs47l24_snd_controls,
 	.num_controls		= ARRAY_SIZE(cs47l24_snd_controls),
 	.dapm_widgets		= cs47l24_dapm_widgets,
diff --git a/sound/soc/codecs/cs47l35.c b/sound/soc/codecs/cs47l35.c
index 18839807c9d1..d7538d50bbd3 100644
--- a/sound/soc/codecs/cs47l35.c
+++ b/sound/soc/codecs/cs47l35.c
@@ -1504,11 +1504,10 @@ static struct snd_soc_dai_driver cs47l35_dai[] = {
 	},
 };
 
-static int cs47l35_open(struct snd_compr_stream *stream)
+static int cs47l35_open(struct snd_soc_component *component,
+			struct snd_compr_stream *stream)
 {
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct cs47l35 *cs47l35 = snd_soc_component_get_drvdata(component);
 	struct madera_priv *priv = &cs47l35->core;
 	struct madera *madera = priv->madera;
@@ -1622,7 +1621,7 @@ static unsigned int cs47l35_digital_vu[] = {
 	MADERA_DAC_DIGITAL_VOLUME_5R,
 };
 
-static const struct snd_compr_ops cs47l35_compr_ops = {
+static const struct snd_compress_ops cs47l35_compress_ops = {
 	.open = &cs47l35_open,
 	.free = &wm_adsp_compr_free,
 	.set_params = &wm_adsp_compr_set_params,
@@ -1638,7 +1637,7 @@ static const struct snd_soc_component_driver soc_component_dev_cs47l35 = {
 	.set_sysclk		= &madera_set_sysclk,
 	.set_pll		= &cs47l35_set_fll,
 	.name			= DRV_NAME,
-	.compr_ops		= &cs47l35_compr_ops,
+	.compress_ops		= &cs47l35_compress_ops,
 	.controls		= cs47l35_snd_controls,
 	.num_controls		= ARRAY_SIZE(cs47l35_snd_controls),
 	.dapm_widgets		= cs47l35_dapm_widgets,
diff --git a/sound/soc/codecs/cs47l85.c b/sound/soc/codecs/cs47l85.c
index a575113207f0..9de991adad74 100644
--- a/sound/soc/codecs/cs47l85.c
+++ b/sound/soc/codecs/cs47l85.c
@@ -2447,11 +2447,10 @@ static struct snd_soc_dai_driver cs47l85_dai[] = {
 	},
 };
 
-static int cs47l85_open(struct snd_compr_stream *stream)
+static int cs47l85_open(struct snd_soc_component *component,
+			struct snd_compr_stream *stream)
 {
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct cs47l85 *cs47l85 = snd_soc_component_get_drvdata(component);
 	struct madera_priv *priv = &cs47l85->core;
 	struct madera *madera = priv->madera;
@@ -2566,7 +2565,7 @@ static const unsigned int cs47l85_digital_vu[] = {
 	MADERA_DAC_DIGITAL_VOLUME_6R,
 };
 
-static const struct snd_compr_ops cs47l85_compr_ops = {
+static const struct snd_compress_ops cs47l85_compress_ops = {
 	.open = &cs47l85_open,
 	.free = &wm_adsp_compr_free,
 	.set_params = &wm_adsp_compr_set_params,
@@ -2582,7 +2581,7 @@ static const struct snd_soc_component_driver soc_component_dev_cs47l85 = {
 	.set_sysclk		= &madera_set_sysclk,
 	.set_pll		= &cs47l85_set_fll,
 	.name			= DRV_NAME,
-	.compr_ops		= &cs47l85_compr_ops,
+	.compress_ops		= &cs47l85_compress_ops,
 	.controls		= cs47l85_snd_controls,
 	.num_controls		= ARRAY_SIZE(cs47l85_snd_controls),
 	.dapm_widgets		= cs47l85_dapm_widgets,
diff --git a/sound/soc/codecs/cs47l90.c b/sound/soc/codecs/cs47l90.c
index 81a1311b14e6..2715b5da0415 100644
--- a/sound/soc/codecs/cs47l90.c
+++ b/sound/soc/codecs/cs47l90.c
@@ -2358,11 +2358,10 @@ static struct snd_soc_dai_driver cs47l90_dai[] = {
 	},
 };
 
-static int cs47l90_open(struct snd_compr_stream *stream)
+static int cs47l90_open(struct snd_soc_component *component,
+			struct snd_compr_stream *stream)
 {
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct cs47l90 *cs47l90 = snd_soc_component_get_drvdata(component);
 	struct madera_priv *priv = &cs47l90->core;
 	struct madera *madera = priv->madera;
@@ -2473,7 +2472,7 @@ static unsigned int cs47l90_digital_vu[] = {
 	MADERA_DAC_DIGITAL_VOLUME_5R,
 };
 
-static const struct snd_compr_ops cs47l90_compr_ops = {
+static const struct snd_compress_ops cs47l90_compress_ops = {
 	.open = &cs47l90_open,
 	.free = &wm_adsp_compr_free,
 	.set_params = &wm_adsp_compr_set_params,
@@ -2489,7 +2488,7 @@ static const struct snd_soc_component_driver soc_component_dev_cs47l90 = {
 	.set_sysclk		= &madera_set_sysclk,
 	.set_pll		= &cs47l90_set_fll,
 	.name			= DRV_NAME,
-	.compr_ops		= &cs47l90_compr_ops,
+	.compress_ops		= &cs47l90_compress_ops,
 	.controls		= cs47l90_snd_controls,
 	.num_controls		= ARRAY_SIZE(cs47l90_snd_controls),
 	.dapm_widgets		= cs47l90_dapm_widgets,
diff --git a/sound/soc/codecs/cs47l92.c b/sound/soc/codecs/cs47l92.c
index 15fc213d178d..108d28007185 100644
--- a/sound/soc/codecs/cs47l92.c
+++ b/sound/soc/codecs/cs47l92.c
@@ -1830,11 +1830,10 @@ static struct snd_soc_dai_driver cs47l92_dai[] = {
 	},
 };
 
-static int cs47l92_open(struct snd_compr_stream *stream)
+static int cs47l92_open(struct snd_soc_component *component,
+			struct snd_compr_stream *stream)
 {
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct cs47l92 *cs47l92 = snd_soc_component_get_drvdata(component);
 	struct madera_priv *priv = &cs47l92->core;
 	struct madera *madera = priv->madera;
@@ -1933,7 +1932,7 @@ static unsigned int cs47l92_digital_vu[] = {
 	MADERA_DAC_DIGITAL_VOLUME_5R,
 };
 
-static const struct snd_compr_ops cs47l92_compr_ops = {
+static const struct snd_compress_ops cs47l92_compress_ops = {
 	.open = &cs47l92_open,
 	.free = &wm_adsp_compr_free,
 	.set_params = &wm_adsp_compr_set_params,
@@ -1949,7 +1948,7 @@ static const struct snd_soc_component_driver soc_component_dev_cs47l92 = {
 	.set_sysclk		= &madera_set_sysclk,
 	.set_pll		= &cs47l92_set_fll,
 	.name			= DRV_NAME,
-	.compr_ops		= &cs47l92_compr_ops,
+	.compress_ops		= &cs47l92_compress_ops,
 	.controls		= cs47l92_snd_controls,
 	.num_controls		= ARRAY_SIZE(cs47l92_snd_controls),
 	.dapm_widgets		= cs47l92_dapm_widgets,
diff --git a/sound/soc/codecs/dmic.c b/sound/soc/codecs/dmic.c
index f5560a49b9e5..5d079d90fd3b 100644
--- a/sound/soc/codecs/dmic.c
+++ b/sound/soc/codecs/dmic.c
@@ -59,14 +59,14 @@ static int dmic_aif_event(struct snd_soc_dapm_widget *w,
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMU:
 		if (dmic->gpio_en)
-			gpiod_set_value(dmic->gpio_en, 1);
+			gpiod_set_value_cansleep(dmic->gpio_en, 1);
 
 		if (dmic->wakeup_delay)
 			msleep(dmic->wakeup_delay);
 		break;
 	case SND_SOC_DAPM_POST_PMD:
 		if (dmic->gpio_en)
-			gpiod_set_value(dmic->gpio_en, 0);
+			gpiod_set_value_cansleep(dmic->gpio_en, 0);
 		break;
 	}
 
diff --git a/sound/soc/codecs/nau8810.c b/sound/soc/codecs/nau8810.c
index de26758c30a8..efe9fb3fb225 100644
--- a/sound/soc/codecs/nau8810.c
+++ b/sound/soc/codecs/nau8810.c
@@ -355,6 +355,8 @@ static const struct snd_kcontrol_new nau8810_snd_controls[] = {
 
 /* Speaker Output Mixer */
 static const struct snd_kcontrol_new nau8810_speaker_mixer_controls[] = {
+	SOC_DAPM_SINGLE("AUX Bypass Switch", NAU8810_REG_SPKMIX,
+		NAU8810_AUXSPK_SFT, 1, 0),
 	SOC_DAPM_SINGLE("Line Bypass Switch", NAU8810_REG_SPKMIX,
 		NAU8810_BYPSPK_SFT, 1, 0),
 	SOC_DAPM_SINGLE("PCM Playback Switch", NAU8810_REG_SPKMIX,
@@ -363,6 +365,8 @@ static const struct snd_kcontrol_new nau8810_speaker_mixer_controls[] = {
 
 /* Mono Output Mixer */
 static const struct snd_kcontrol_new nau8810_mono_mixer_controls[] = {
+	SOC_DAPM_SINGLE("AUX Bypass Switch", NAU8810_REG_MONOMIX,
+		NAU8810_AUXMOUT_SFT, 1, 0),
 	SOC_DAPM_SINGLE("Line Bypass Switch", NAU8810_REG_MONOMIX,
 		NAU8810_BYPMOUT_SFT, 1, 0),
 	SOC_DAPM_SINGLE("PCM Playback Switch", NAU8810_REG_MONOMIX,
@@ -371,6 +375,8 @@ static const struct snd_kcontrol_new nau8810_mono_mixer_controls[] = {
 
 /* PGA Mute */
 static const struct snd_kcontrol_new nau8810_pgaboost_mixer_controls[] = {
+	SOC_DAPM_SINGLE("AUX PGA Switch", NAU8810_REG_ADCBOOST,
+		NAU8810_AUXBSTGAIN_SFT, 0x7, 0),
 	SOC_DAPM_SINGLE("PGA Mute Switch", NAU8810_REG_PGAGAIN,
 		NAU8810_PGAMT_SFT, 1, 1),
 	SOC_DAPM_SINGLE("PMIC PGA Switch", NAU8810_REG_ADCBOOST,
@@ -379,6 +385,8 @@ static const struct snd_kcontrol_new nau8810_pgaboost_mixer_controls[] = {
 
 /* Input PGA */
 static const struct snd_kcontrol_new nau8810_inpga[] = {
+	SOC_DAPM_SINGLE("AUX Switch", NAU8810_REG_INPUT_SIGNAL,
+		NAU8810_AUXPGA_SFT, 1, 0),
 	SOC_DAPM_SINGLE("MicN Switch", NAU8810_REG_INPUT_SIGNAL,
 		NAU8810_NMICPGA_SFT, 1, 0),
 	SOC_DAPM_SINGLE("MicP Switch", NAU8810_REG_INPUT_SIGNAL,
@@ -401,6 +409,23 @@ static int check_mclk_select_pll(struct snd_soc_dapm_widget *source,
 	return (value & NAU8810_CLKM_MASK);
 }
 
+static int check_mic_enabled(struct snd_soc_dapm_widget *source,
+	struct snd_soc_dapm_widget *sink)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(source->dapm);
+	struct nau8810 *nau8810 = snd_soc_component_get_drvdata(component);
+	unsigned int value;
+
+	regmap_read(nau8810->regmap, NAU8810_REG_INPUT_SIGNAL, &value);
+	if (value & NAU8810_PMICPGA_EN || value & NAU8810_NMICPGA_EN)
+		return 1;
+	regmap_read(nau8810->regmap, NAU8810_REG_ADCBOOST, &value);
+	if (value & NAU8810_PMICBSTGAIN_MASK)
+		return 1;
+	return 0;
+}
+
 static const struct snd_soc_dapm_widget nau8810_dapm_widgets[] = {
 	SND_SOC_DAPM_MIXER("Speaker Mixer", NAU8810_REG_POWER3,
 		NAU8810_SPKMX_EN_SFT, 0, &nau8810_speaker_mixer_controls[0],
@@ -425,6 +450,8 @@ static const struct snd_soc_dapm_widget nau8810_dapm_widgets[] = {
 	SND_SOC_DAPM_MIXER("Input Boost Stage", NAU8810_REG_POWER2,
 		NAU8810_BST_EN_SFT, 0, nau8810_pgaboost_mixer_controls,
 		ARRAY_SIZE(nau8810_pgaboost_mixer_controls)),
+	SND_SOC_DAPM_PGA("AUX Input", NAU8810_REG_POWER1,
+		NAU8810_AUX_EN_SFT, 0, NULL, 0),
 
 	SND_SOC_DAPM_SUPPLY("Mic Bias", NAU8810_REG_POWER1,
 		NAU8810_MICBIAS_EN_SFT, 0, NULL, 0),
@@ -434,6 +461,7 @@ static const struct snd_soc_dapm_widget nau8810_dapm_widgets[] = {
 	SND_SOC_DAPM_SWITCH("Digital Loopback", SND_SOC_NOPM, 0, 0,
 		&nau8810_loopback),
 
+	SND_SOC_DAPM_INPUT("AUX"),
 	SND_SOC_DAPM_INPUT("MICN"),
 	SND_SOC_DAPM_INPUT("MICP"),
 	SND_SOC_DAPM_OUTPUT("MONOOUT"),
@@ -445,10 +473,12 @@ static const struct snd_soc_dapm_route nau8810_dapm_routes[] = {
 	{"DAC", NULL, "PLL", check_mclk_select_pll},
 
 	/* Mono output mixer */
+	{"Mono Mixer", "AUX Bypass Switch", "AUX Input"},
 	{"Mono Mixer", "PCM Playback Switch", "DAC"},
 	{"Mono Mixer", "Line Bypass Switch", "Input Boost Stage"},
 
 	/* Speaker output mixer */
+	{"Speaker Mixer", "AUX Bypass Switch", "AUX Input"},
 	{"Speaker Mixer", "PCM Playback Switch", "DAC"},
 	{"Speaker Mixer", "Line Bypass Switch", "Input Boost Stage"},
 
@@ -463,13 +493,16 @@ static const struct snd_soc_dapm_route nau8810_dapm_routes[] = {
 	/* Input Boost Stage */
 	{"ADC", NULL, "Input Boost Stage"},
 	{"ADC", NULL, "PLL", check_mclk_select_pll},
+	{"Input Boost Stage", "AUX PGA Switch", "AUX Input"},
 	{"Input Boost Stage", "PGA Mute Switch", "Input PGA"},
 	{"Input Boost Stage", "PMIC PGA Switch", "MICP"},
 
 	/* Input PGA */
-	{"Input PGA", NULL, "Mic Bias"},
+	{"Input PGA", NULL, "Mic Bias", check_mic_enabled},
+	{"Input PGA", "AUX Switch", "AUX Input"},
 	{"Input PGA", "MicN Switch", "MICN"},
 	{"Input PGA", "MicP Switch", "MICP"},
+	{"AUX Input", NULL, "AUX"},
 
 	/* Digital Looptack */
 	{"Digital Loopback", "Switch", "ADC"},
diff --git a/sound/soc/codecs/nau8810.h b/sound/soc/codecs/nau8810.h
index 1ada31883dc6..6a7cacbe044a 100644
--- a/sound/soc/codecs/nau8810.h
+++ b/sound/soc/codecs/nau8810.h
@@ -69,6 +69,7 @@
 
 /* NAU8810_REG_POWER1 (0x1) */
 #define NAU8810_DCBUF_EN		(0x1 << 8)
+#define NAU8810_AUX_EN_SFT		6
 #define NAU8810_PLL_EN_SFT		5
 #define NAU8810_MICBIAS_EN_SFT	4
 #define NAU8810_ABIAS_EN		(0x1 << 3)
@@ -228,7 +229,10 @@
 
 /* NAU8810_REG_INPUT_SIGNAL (0x2C) */
 #define NAU8810_PMICPGA_SFT		0
+#define NAU8810_PMICPGA_EN		(0x1 << NAU8810_PMICPGA_SFT)
 #define NAU8810_NMICPGA_SFT		1
+#define NAU8810_NMICPGA_EN		(0x1 << NAU8810_NMICPGA_SFT)
+#define NAU8810_AUXPGA_SFT		2
 
 /* NAU8810_REG_PGAGAIN (0x2D) */
 #define NAU8810_PGAGAIN_SFT		0
@@ -236,12 +240,15 @@
 #define NAU8810_PGAZC_SFT		7
 
 /* NAU8810_REG_ADCBOOST (0x2F) */
+#define NAU8810_AUXBSTGAIN_SFT	0
 #define NAU8810_PMICBSTGAIN_SFT	4
+#define NAU8810_PMICBSTGAIN_MASK	(0x7 << NAU8810_PMICBSTGAIN_SFT)
 #define NAU8810_PGABST_SFT		8
 
 /* NAU8810_REG_SPKMIX (0x32) */
 #define NAU8810_DACSPK_SFT		0
 #define NAU8810_BYPSPK_SFT		1
+#define NAU8810_AUXSPK_SFT		5
 
 /* NAU8810_REG_SPKGAIN (0x36) */
 #define NAU8810_SPKGAIN_SFT		0
@@ -251,6 +258,7 @@
 /* NAU8810_REG_MONOMIX (0x38) */
 #define NAU8810_DACMOUT_SFT		0
 #define NAU8810_BYPMOUT_SFT		1
+#define NAU8810_AUXMOUT_SFT		2
 #define NAU8810_MOUTMXMT_SFT		6
 
 
diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c
index a5a7e46de246..1502a22b0d4a 100644
--- a/sound/soc/codecs/rt1308-sdw.c
+++ b/sound/soc/codecs/rt1308-sdw.c
@@ -235,9 +235,9 @@ static int rt1308_io_init(struct device *dev, struct sdw_slave *slave)
 	efuse_c_btl_r = tmp;
 	regmap_read(rt1308->regmap, 0xc872, &tmp);
 	efuse_c_btl_r = efuse_c_btl_r | (tmp << 8);
-	dev_info(&slave->dev, "%s m_btl_l=0x%x, m_btl_r=0x%x\n", __func__,
+	dev_dbg(&slave->dev, "%s m_btl_l=0x%x, m_btl_r=0x%x\n", __func__,
 		efuse_m_btl_l, efuse_m_btl_r);
-	dev_info(&slave->dev, "%s c_btl_l=0x%x, c_btl_r=0x%x\n", __func__,
+	dev_dbg(&slave->dev, "%s c_btl_l=0x%x, c_btl_r=0x%x\n", __func__,
 		efuse_c_btl_l, efuse_c_btl_r);
 
 	/* initial settings */
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
index 38897568ee96..0f713efde046 100644
--- a/sound/soc/codecs/tlv320adcx140.c
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -511,11 +511,11 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = {
 static const struct snd_kcontrol_new adcx140_snd_controls[] = {
 	SOC_SINGLE_TLV("Analog CH1 Mic Gain Volume", ADCX140_CH1_CFG1, 2, 42, 0,
 			adc_tlv),
-	SOC_SINGLE_TLV("Analog CH2 Mic Gain Volume", ADCX140_CH1_CFG2, 2, 42, 0,
+	SOC_SINGLE_TLV("Analog CH2 Mic Gain Volume", ADCX140_CH2_CFG1, 2, 42, 0,
 			adc_tlv),
-	SOC_SINGLE_TLV("Analog CH3 Mic Gain Volume", ADCX140_CH1_CFG3, 2, 42, 0,
+	SOC_SINGLE_TLV("Analog CH3 Mic Gain Volume", ADCX140_CH3_CFG1, 2, 42, 0,
 			adc_tlv),
-	SOC_SINGLE_TLV("Analog CH4 Mic Gain Volume", ADCX140_CH1_CFG4, 2, 42, 0,
+	SOC_SINGLE_TLV("Analog CH4 Mic Gain Volume", ADCX140_CH4_CFG1, 2, 42, 0,
 			adc_tlv),
 
 	SOC_SINGLE_TLV("DRE Threshold", ADCX140_DRE_CFG0, 4, 9, 0,
diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c
index 700cc1212770..fb073f4dc7ed 100644
--- a/sound/soc/codecs/wcd9335.c
+++ b/sound/soc/codecs/wcd9335.c
@@ -1919,7 +1919,7 @@ static int wcd9335_hw_params(struct snd_pcm_substream *substream,
 				__func__, params_rate(params));
 			return -EINVAL;
 
-		};
+		}
 
 		ret = wcd9335_set_decimator_rate(dai, tx_fs_rate,
 						params_rate(params));
@@ -1935,13 +1935,13 @@ static int wcd9335_hw_params(struct snd_pcm_substream *substream,
 			dev_err(wcd->dev, "%s: Invalid format 0x%x\n",
 				__func__, params_width(params));
 			return -EINVAL;
-		};
+		}
 		break;
 	default:
 		dev_err(wcd->dev, "Invalid stream type %d\n",
 			substream->stream);
 		return -EINVAL;
-	};
+	}
 
 	wcd->dai[dai->id].sconfig.rate = params_rate(params);
 	wcd9335_slim_set_hw_params(wcd, &wcd->dai[dai->id], substream->stream);
@@ -2216,7 +2216,7 @@ static int wcd9335_set_compander(struct snd_kcontrol *kc,
 		break;
 	default:
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -2565,7 +2565,7 @@ static int wcd9335_micbias_control(struct snd_soc_component *component,
 							0xC0, 0x00);
 		}
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -2603,7 +2603,7 @@ static int __wcd9335_codec_enable_micbias(struct snd_soc_dapm_widget *w,
 	case SND_SOC_DAPM_POST_PMD:
 		wcd9335_micbias_control(comp, micb_num, MICB_DISABLE, true);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -2846,7 +2846,7 @@ static int wcd9335_codec_enable_dec(struct snd_soc_dapm_widget *w,
 	case SND_SOC_DAPM_POST_PMD:
 		snd_soc_component_update_bits(comp, tx_vol_ctl_reg, 0x10, 0x00);
 		break;
-	};
+	}
 out:
 	kfree(wname);
 	return ret;
@@ -2952,7 +2952,7 @@ static int wcd9335_codec_enable_dmic(struct snd_soc_dapm_widget *w,
 		dev_err(comp->dev, "%s: Invalid DMIC Selection\n",
 			__func__);
 		return -EINVAL;
-	};
+	}
 
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
@@ -2985,7 +2985,7 @@ static int wcd9335_codec_enable_dmic(struct snd_soc_dapm_widget *w,
 				dmic_rate_val << dmic_rate_shift);
 		}
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3076,7 +3076,7 @@ static int wcd9335_codec_enable_mix_path(struct snd_soc_dapm_widget *w,
 		dev_err(comp->dev, "%s: No gain register avail for %s\n",
 			__func__, w->name);
 		return 0;
-	};
+	}
 
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMU:
@@ -3086,7 +3086,7 @@ static int wcd9335_codec_enable_mix_path(struct snd_soc_dapm_widget *w,
 		break;
 	case SND_SOC_DAPM_POST_PMD:
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3141,7 +3141,7 @@ static u16 wcd9335_interp_get_primary_reg(u16 reg, u16 *ind)
 		prim_int_reg = WCD9335_CDC_RX8_RX_PATH_CTL;
 		*ind = 8;
 		break;
-	};
+	}
 
 	return prim_int_reg;
 }
@@ -3229,7 +3229,7 @@ static int wcd9335_codec_enable_prim_interpolator(
 			wcd9335_codec_hd2_control(comp, prim_int_reg, event);
 		}
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3352,7 +3352,7 @@ static int wcd9335_codec_enable_interpolator(struct snd_soc_dapm_widget *w,
 		wcd9335_config_compander(comp, w->shift, event);
 		wcd9335_codec_enable_prim_interpolator(comp, reg, event);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3575,7 +3575,7 @@ static int wcd9335_codec_hphl_dac_event(struct snd_soc_dapm_widget *w,
 				((hph_mode == CLS_H_LOHIFI) ?
 				 CLS_H_HIFI : hph_mode));
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3616,7 +3616,7 @@ static int wcd9335_codec_ear_dac_event(struct snd_soc_dapm_widget *w,
 		wcd_clsh_ctrl_set_state(wcd->clsh_ctrl, WCD_CLSH_EVENT_POST_PA,
 					WCD_CLSH_STATE_EAR, CLS_H_NORMAL);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3725,7 +3725,7 @@ static int wcd9335_codec_hphr_dac_event(struct snd_soc_dapm_widget *w,
 			     WCD_CLSH_STATE_HPHR, ((hph_mode == CLS_H_LOHIFI) ?
 						CLS_H_HIFI : hph_mode));
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3773,7 +3773,7 @@ static int wcd9335_codec_enable_hphl_pa(struct snd_soc_dapm_widget *w,
 		 */
 		usleep_range(5000, 5500);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3829,7 +3829,7 @@ static int wcd9335_codec_enable_lineout_pa(struct snd_soc_dapm_widget *w,
 		 */
 		usleep_range(5000, 5500);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3875,7 +3875,7 @@ static int wcd9335_codec_enable_rx_bias(struct snd_soc_dapm_widget *w,
 					WCD9335_ANA_RX_BIAS_ENABLE_MASK,
 					WCD9335_ANA_RX_BIAS_DISABLE);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3921,7 +3921,7 @@ static int wcd9335_codec_enable_hphr_pa(struct snd_soc_dapm_widget *w,
 		 */
 		usleep_range(5000, 5500);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3957,7 +3957,7 @@ static int wcd9335_codec_enable_ear_pa(struct snd_soc_dapm_widget *w,
 		usleep_range(5000, 5500);
 
 		break;
-	};
+	}
 
 	return 0;
 }
diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index 5269857e2746..531b8b79e55f 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -1787,7 +1787,7 @@ static int wcd934x_hw_params(struct snd_pcm_substream *substream,
 				params_rate(params));
 			return -EINVAL;
 
-		};
+		}
 
 		ret = wcd934x_set_decimator_rate(dai, tx_fs_rate,
 						 params_rate(params));
@@ -1803,13 +1803,13 @@ static int wcd934x_hw_params(struct snd_pcm_substream *substream,
 			dev_err(wcd->dev, "Invalid format 0x%x\n",
 				params_width(params));
 			return -EINVAL;
-		};
+		}
 		break;
 	default:
 		dev_err(wcd->dev, "Invalid stream type %d\n",
 			substream->stream);
 		return -EINVAL;
-	};
+	}
 
 	wcd->dai[dai->id].sconfig.rate = params_rate(params);
 	wcd934x_slim_set_hw_params(wcd, &wcd->dai[dai->id], substream->stream);
@@ -2489,7 +2489,7 @@ static int wcd934x_compander_set(struct snd_kcontrol *kc,
 		break;
 	default:
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3539,7 +3539,7 @@ static int wcd934x_codec_enable_mix_path(struct snd_soc_dapm_widget *w,
 		val += offset_val;
 		snd_soc_component_write(comp, gain_reg, val);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3593,7 +3593,7 @@ static int wcd934x_codec_enable_main_path(struct snd_soc_dapm_widget *w,
 		snd_soc_component_write(comp, gain_reg,
 				snd_soc_component_read32(comp, gain_reg));
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3618,7 +3618,7 @@ static int wcd934x_codec_ear_dac_event(struct snd_soc_dapm_widget *w,
 		wcd_clsh_ctrl_set_state(wcd->clsh_ctrl, WCD_CLSH_EVENT_POST_PA,
 					WCD_CLSH_STATE_EAR, CLS_H_NORMAL);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3670,7 +3670,7 @@ static int wcd934x_codec_hphl_dac_event(struct snd_soc_dapm_widget *w,
 		break;
 	default:
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3720,7 +3720,7 @@ static int wcd934x_codec_hphr_dac_event(struct snd_soc_dapm_widget *w,
 		break;
 	default:
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3801,7 +3801,7 @@ static int wcd934x_codec_enable_hphl_pa(struct snd_soc_dapm_widget *w,
 		 */
 		usleep_range(20000, 20100);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3863,7 +3863,7 @@ static int wcd934x_codec_enable_hphr_pa(struct snd_soc_dapm_widget *w,
 		 */
 		usleep_range(20000, 20100);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -3878,7 +3878,7 @@ static u32 wcd934x_get_dmic_sample_rate(struct snd_soc_component *comp,
 	u16 adc_mux_ctl_reg, tx_fs_reg;
 	u32 dmic_fs;
 
-	while (dec_found == 0 && adc_mux_index < WCD934X_MAX_VALID_ADC_MUX) {
+	while (!dec_found && adc_mux_index < WCD934X_MAX_VALID_ADC_MUX) {
 		if (adc_mux_index < 4) {
 			adc_mux_ctl_reg = WCD934X_CDC_TX_INP_MUX_ADC_MUX0_CFG0 +
 						(adc_mux_index * 2);
@@ -4015,7 +4015,7 @@ static int wcd934x_codec_enable_dmic(struct snd_soc_dapm_widget *w,
 		dev_err(comp->dev, "%s: Invalid DMIC Selection\n",
 			__func__);
 		return -EINVAL;
-	};
+	}
 
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
@@ -4040,7 +4040,7 @@ static int wcd934x_codec_enable_dmic(struct snd_soc_dapm_widget *w,
 			snd_soc_component_update_bits(comp, dmic_clk_reg,
 						      dmic_clk_en, 0);
 		break;
-	};
+	}
 
 	return 0;
 }
@@ -4267,7 +4267,7 @@ static int wcd934x_codec_enable_dec(struct snd_soc_dapm_widget *w,
 					      WCD934X_DEC_PWR_LVL_MASK,
 					      WCD934X_DEC_PWR_LVL_DF);
 		break;
-	};
+	}
 out:
 	kfree(wname);
 	return ret;
diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c
index d6d4b4121369..2ed3fa67027d 100644
--- a/sound/soc/codecs/wm5102.c
+++ b/sound/soc/codecs/wm5102.c
@@ -1909,10 +1909,9 @@ static struct snd_soc_dai_driver wm5102_dai[] = {
 	},
 };
 
-static int wm5102_open(struct snd_compr_stream *stream)
+static int wm5102_open(struct snd_soc_component *component,
+		       struct snd_compr_stream *stream)
 {
-	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct wm5102_priv *priv = snd_soc_component_get_drvdata(component);
 
 	return wm_adsp_compr_open(&priv->core.adsp[0], stream);
@@ -1992,7 +1991,7 @@ static unsigned int wm5102_digital_vu[] = {
 	ARIZONA_DAC_DIGITAL_VOLUME_5R,
 };
 
-static struct snd_compr_ops wm5102_compr_ops = {
+static struct snd_compress_ops wm5102_compress_ops = {
 	.open		= wm5102_open,
 	.free		= wm_adsp_compr_free,
 	.set_params	= wm_adsp_compr_set_params,
@@ -2008,7 +2007,7 @@ static const struct snd_soc_component_driver soc_component_dev_wm5102 = {
 	.set_sysclk		= arizona_set_sysclk,
 	.set_pll		= wm5102_set_fll,
 	.name			= DRV_NAME,
-	.compr_ops		= &wm5102_compr_ops,
+	.compress_ops		= &wm5102_compress_ops,
 	.controls		= wm5102_snd_controls,
 	.num_controls		= ARRAY_SIZE(wm5102_snd_controls),
 	.dapm_widgets		= wm5102_dapm_widgets,
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 499e87d1dfcc..44de44bff423 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -2237,10 +2237,10 @@ static struct snd_soc_dai_driver wm5110_dai[] = {
 	},
 };
 
-static int wm5110_open(struct snd_compr_stream *stream)
+static int wm5110_open(struct snd_soc_component *component,
+		       struct snd_compr_stream *stream)
 {
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct wm5110_priv *priv = snd_soc_component_get_drvdata(component);
 	struct arizona *arizona = priv->core.arizona;
 	int n_adsp;
@@ -2355,7 +2355,7 @@ static unsigned int wm5110_digital_vu[] = {
 	ARIZONA_DAC_DIGITAL_VOLUME_6R,
 };
 
-static struct snd_compr_ops wm5110_compr_ops = {
+static struct snd_compress_ops wm5110_compress_ops = {
 	.open		= wm5110_open,
 	.free		= wm_adsp_compr_free,
 	.set_params	= wm_adsp_compr_set_params,
@@ -2371,7 +2371,7 @@ static const struct snd_soc_component_driver soc_component_dev_wm5110 = {
 	.set_sysclk		= arizona_set_sysclk,
 	.set_pll		= wm5110_set_fll,
 	.name			= DRV_NAME,
-	.compr_ops		= &wm5110_compr_ops,
+	.compress_ops		= &wm5110_compress_ops,
 	.controls		= wm5110_snd_controls,
 	.num_controls		= ARRAY_SIZE(wm5110_snd_controls),
 	.dapm_widgets		= wm5110_dapm_widgets,
diff --git a/sound/soc/codecs/wm8782.c b/sound/soc/codecs/wm8782.c
index aa5577e364d0..f89855c616eb 100644
--- a/sound/soc/codecs/wm8782.c
+++ b/sound/soc/codecs/wm8782.c
@@ -7,7 +7,7 @@
  * Author: Johannes Stezenbach <js@sig21.net>
  *
  * based on ad73311.c
- * Copyright:	Analog Device Inc.
+ * Copyright:	Analog Devices Inc.
  * Author:	Cliff Cai <cliff.cai@analog.com>
  */
 
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index 271235a69c01..3e239fa9bc8d 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -443,12 +443,6 @@ SOC_SINGLE("LINEOUT2 LP -12dB", WM8900_REG_LOUTMIXCTL1,
 
 };
 
-static const struct snd_kcontrol_new wm8900_dapm_loutput2_control =
-SOC_DAPM_SINGLE("LINEOUT2L Switch", WM8900_REG_POWER3, 6, 1, 0);
-
-static const struct snd_kcontrol_new wm8900_dapm_routput2_control =
-SOC_DAPM_SINGLE("LINEOUT2R Switch", WM8900_REG_POWER3, 5, 1, 0);
-
 static const struct snd_kcontrol_new wm8900_loutmix_controls[] = {
 SOC_DAPM_SINGLE("LINPUT3 Bypass Switch", WM8900_REG_LOUTMIXCTL1, 7, 1, 0),
 SOC_DAPM_SINGLE("AUX Bypass Switch", WM8900_REG_AUXOUT_CTL, 7, 1, 0),
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index d9d59f45833f..0a2cfff44441 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -118,7 +118,7 @@ static const struct reg_default wm8962_reg[] = {
 	{ 5, 0x0018 },   /* R5     - ADC & DAC Control 1 */
 	{ 6, 0x2008 },   /* R6     - ADC & DAC Control 2 */
 	{ 7, 0x000A },   /* R7     - Audio Interface 0 */
-
+	{ 8, 0x01E4 },   /* R8     - Clocking2 */
 	{ 9, 0x0300 },   /* R9     - Audio Interface 1 */
 	{ 10, 0x00C0 },  /* R10    - Left DAC volume */
 	{ 11, 0x00C0 },  /* R11    - Right DAC volume */
@@ -788,7 +788,6 @@ static bool wm8962_volatile_register(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
 	case WM8962_CLOCKING1:
-	case WM8962_CLOCKING2:
 	case WM8962_SOFTWARE_RESET:
 	case WM8962_THERMAL_SHUTDOWN_STATUS:
 	case WM8962_ADDITIONAL_CONTROL_4:
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index cfe7892696dd..499a29b47d5e 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -32,93 +32,14 @@ struct wm8990_priv {
 	unsigned int pcmclk;
 };
 
-static bool wm8990_volatile_register(struct device *dev, unsigned int reg)
-{
-	switch (reg) {
-	case WM8990_RESET:
-		return true;
-	default:
-		return false;
-	}
-}
-
-static const struct reg_default wm8990_reg_defaults[] = {
-	{  1, 0x0000 },     /* R1  - Power Management (1) */
-	{  2, 0x6000 },     /* R2  - Power Management (2) */
-	{  3, 0x0000 },     /* R3  - Power Management (3) */
-	{  4, 0x4050 },     /* R4  - Audio Interface (1) */
-	{  5, 0x4000 },     /* R5  - Audio Interface (2) */
-	{  6, 0x01C8 },     /* R6  - Clocking (1) */
-	{  7, 0x0000 },     /* R7  - Clocking (2) */
-	{  8, 0x0040 },     /* R8  - Audio Interface (3) */
-	{  9, 0x0040 },     /* R9  - Audio Interface (4) */
-	{ 10, 0x0004 },     /* R10 - DAC CTRL */
-	{ 11, 0x00C0 },     /* R11 - Left DAC Digital Volume */
-	{ 12, 0x00C0 },     /* R12 - Right DAC Digital Volume */
-	{ 13, 0x0000 },     /* R13 - Digital Side Tone */
-	{ 14, 0x0100 },     /* R14 - ADC CTRL */
-	{ 15, 0x00C0 },     /* R15 - Left ADC Digital Volume */
-	{ 16, 0x00C0 },     /* R16 - Right ADC Digital Volume */
-
-	{ 18, 0x0000 },     /* R18 - GPIO CTRL 1 */
-	{ 19, 0x1000 },     /* R19 - GPIO1 & GPIO2 */
-	{ 20, 0x1010 },     /* R20 - GPIO3 & GPIO4 */
-	{ 21, 0x1010 },     /* R21 - GPIO5 & GPIO6 */
-	{ 22, 0x8000 },     /* R22 - GPIOCTRL 2 */
-	{ 23, 0x0800 },     /* R23 - GPIO_POL */
-	{ 24, 0x008B },     /* R24 - Left Line Input 1&2 Volume */
-	{ 25, 0x008B },     /* R25 - Left Line Input 3&4 Volume */
-	{ 26, 0x008B },     /* R26 - Right Line Input 1&2 Volume */
-	{ 27, 0x008B },     /* R27 - Right Line Input 3&4 Volume */
-	{ 28, 0x0000 },     /* R28 - Left Output Volume */
-	{ 29, 0x0000 },     /* R29 - Right Output Volume */
-	{ 30, 0x0066 },     /* R30 - Line Outputs Volume */
-	{ 31, 0x0022 },     /* R31 - Out3/4 Volume */
-	{ 32, 0x0079 },     /* R32 - Left OPGA Volume */
-	{ 33, 0x0079 },     /* R33 - Right OPGA Volume */
-	{ 34, 0x0003 },     /* R34 - Speaker Volume */
-	{ 35, 0x0003 },     /* R35 - ClassD1 */
-
-	{ 37, 0x0100 },     /* R37 - ClassD3 */
-	{ 38, 0x0079 },     /* R38 - ClassD4 */
-	{ 39, 0x0000 },     /* R39 - Input Mixer1 */
-	{ 40, 0x0000 },     /* R40 - Input Mixer2 */
-	{ 41, 0x0000 },     /* R41 - Input Mixer3 */
-	{ 42, 0x0000 },     /* R42 - Input Mixer4 */
-	{ 43, 0x0000 },     /* R43 - Input Mixer5 */
-	{ 44, 0x0000 },     /* R44 - Input Mixer6 */
-	{ 45, 0x0000 },     /* R45 - Output Mixer1 */
-	{ 46, 0x0000 },     /* R46 - Output Mixer2 */
-	{ 47, 0x0000 },     /* R47 - Output Mixer3 */
-	{ 48, 0x0000 },     /* R48 - Output Mixer4 */
-	{ 49, 0x0000 },     /* R49 - Output Mixer5 */
-	{ 50, 0x0000 },     /* R50 - Output Mixer6 */
-	{ 51, 0x0180 },     /* R51 - Out3/4 Mixer */
-	{ 52, 0x0000 },     /* R52 - Line Mixer1 */
-	{ 53, 0x0000 },     /* R53 - Line Mixer2 */
-	{ 54, 0x0000 },     /* R54 - Speaker Mixer */
-	{ 55, 0x0000 },     /* R55 - Additional Control */
-	{ 56, 0x0000 },     /* R56 - AntiPOP1 */
-	{ 57, 0x0000 },     /* R57 - AntiPOP2 */
-	{ 58, 0x0000 },     /* R58 - MICBIAS */
-
-	{ 60, 0x0008 },     /* R60 - PLL1 */
-	{ 61, 0x0031 },     /* R61 - PLL2 */
-	{ 62, 0x0026 },     /* R62 - PLL3 */
-};
-
 #define wm8990_reset(c) snd_soc_component_write(c, WM8990_RESET, 0)
 
-static const DECLARE_TLV_DB_SCALE(rec_mix_tlv, -1500, 600, 0);
-
 static const DECLARE_TLV_DB_SCALE(in_pga_tlv, -1650, 3000, 0);
 
 static const DECLARE_TLV_DB_SCALE(out_mix_tlv, 0, -2100, 0);
 
 static const DECLARE_TLV_DB_SCALE(out_pga_tlv, -7300, 600, 0);
 
-static const DECLARE_TLV_DB_SCALE(out_omix_tlv, -600, 0, 0);
-
 static const DECLARE_TLV_DB_SCALE(out_dac_tlv, -7163, 0, 0);
 
 static const DECLARE_TLV_DB_SCALE(in_adc_tlv, -7163, 1763, 0);
@@ -486,14 +407,6 @@ static SOC_ENUM_SINGLE_DECL(wm8990_ainrmux_enum,
 static const struct snd_kcontrol_new wm8990_dapm_ainrmux_controls =
 SOC_DAPM_ENUM("Route", wm8990_ainrmux_enum);
 
-/* RXVOICE */
-static const struct snd_kcontrol_new wm8990_dapm_rxvoice_controls[] = {
-SOC_DAPM_SINGLE_TLV("LIN4/RXN", WM8990_INPUT_MIXER5, WM8990_LR4BVOL_SHIFT,
-			WM8990_LR4BVOL_MASK, 0, in_mix_tlv),
-SOC_DAPM_SINGLE_TLV("RIN4/RXP", WM8990_INPUT_MIXER6, WM8990_RL4BVOL_SHIFT,
-			WM8990_RL4BVOL_MASK, 0, in_mix_tlv),
-};
-
 /* LOMIX */
 static const struct snd_kcontrol_new wm8990_dapm_lomix_controls[] = {
 SOC_DAPM_SINGLE("LOMIX Right ADC Bypass Switch", WM8990_OUTPUT_MIXER1,
@@ -1306,17 +1219,6 @@ static const struct snd_soc_component_driver soc_component_dev_wm8990 = {
 	.non_legacy_dai_naming	= 1,
 };
 
-static const struct regmap_config wm8990_regmap = {
-	.reg_bits = 8,
-	.val_bits = 16,
-
-	.max_register = WM8990_PLL3,
-	.volatile_reg = wm8990_volatile_register,
-	.reg_defaults = wm8990_reg_defaults,
-	.num_reg_defaults = ARRAY_SIZE(wm8990_reg_defaults),
-	.cache_type = REGCACHE_RBTREE,
-};
-
 static int wm8990_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
diff --git a/sound/soc/codecs/wm8991.c b/sound/soc/codecs/wm8991.c
index 93c156782d59..f8375d67e901 100644
--- a/sound/soc/codecs/wm8991.c
+++ b/sound/soc/codecs/wm8991.c
@@ -476,14 +476,6 @@ static SOC_ENUM_SINGLE_DECL(wm8991_ainrmux_enum,
 static const struct snd_kcontrol_new wm8991_dapm_ainrmux_controls =
 	SOC_DAPM_ENUM("Route", wm8991_ainrmux_enum);
 
-/* RXVOICE */
-static const struct snd_kcontrol_new wm8991_dapm_rxvoice_controls[] = {
-	SOC_DAPM_SINGLE_TLV("LIN4RXN", WM8991_INPUT_MIXER5, WM8991_LR4BVOL_SHIFT,
-		WM8991_LR4BVOL_MASK, 0, in_mix_tlv),
-	SOC_DAPM_SINGLE_TLV("RIN4RXP", WM8991_INPUT_MIXER6, WM8991_RL4BVOL_SHIFT,
-		WM8991_RL4BVOL_MASK, 0, in_mix_tlv),
-};
-
 /* LOMIX */
 static const struct snd_kcontrol_new wm8991_dapm_lomix_controls[] = {
 	SOC_DAPM_SINGLE("LOMIX Right ADC Bypass Switch", WM8991_OUTPUT_MIXER1,
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 15ce64a48a87..55d0b9be6ff0 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -285,7 +285,6 @@ static const DECLARE_TLV_DB_SCALE(st_tlv, -3600, 300, 0);
 static const DECLARE_TLV_DB_SCALE(wm8994_3d_tlv, -1600, 183, 0);
 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 static const DECLARE_TLV_DB_SCALE(ng_tlv, -10200, 600, 0);
-static const DECLARE_TLV_DB_SCALE(mixin_boost_tlv, 0, 900, 0);
 
 #define WM8994_DRC_SWITCH(xname, reg, shift) \
 	SOC_SINGLE_EXT(xname, reg, shift, 1, 0, \
@@ -733,13 +732,6 @@ SOC_SINGLE_TLV("AIF2DAC Noise Gate Threshold Volume",
 	       7, 1, ng_tlv),
 };
 
-static const struct snd_kcontrol_new wm1811_snd_controls[] = {
-SOC_SINGLE_TLV("MIXINL IN1LP Boost Volume", WM8994_INPUT_MIXER_1, 7, 1, 0,
-	       mixin_boost_tlv),
-SOC_SINGLE_TLV("MIXINL IN1RP Boost Volume", WM8994_INPUT_MIXER_1, 8, 1, 0,
-	       mixin_boost_tlv),
-};
-
 /* We run all mode setting through a function to enforce audio mode */
 static void wm1811_jackdet_set_mode(struct snd_soc_component *component, u16 mode)
 {
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 1ef69409ccd1..519ca2e69637 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -3509,7 +3509,8 @@ int wm_adsp_compr_open(struct wm_adsp *dsp, struct snd_compr_stream *stream)
 }
 EXPORT_SYMBOL_GPL(wm_adsp_compr_open);
 
-int wm_adsp_compr_free(struct snd_compr_stream *stream)
+int wm_adsp_compr_free(struct snd_soc_component *component,
+		       struct snd_compr_stream *stream)
 {
 	struct wm_adsp_compr *compr = stream->runtime->private_data;
 	struct wm_adsp *dsp = compr->dsp;
@@ -3583,7 +3584,8 @@ static inline unsigned int wm_adsp_compr_frag_words(struct wm_adsp_compr *compr)
 	return compr->size.fragment_size / WM_ADSP_DATA_WORD_SIZE;
 }
 
-int wm_adsp_compr_set_params(struct snd_compr_stream *stream,
+int wm_adsp_compr_set_params(struct snd_soc_component *component,
+			     struct snd_compr_stream *stream,
 			     struct snd_compr_params *params)
 {
 	struct wm_adsp_compr *compr = stream->runtime->private_data;
@@ -3610,7 +3612,8 @@ int wm_adsp_compr_set_params(struct snd_compr_stream *stream,
 }
 EXPORT_SYMBOL_GPL(wm_adsp_compr_set_params);
 
-int wm_adsp_compr_get_caps(struct snd_compr_stream *stream,
+int wm_adsp_compr_get_caps(struct snd_soc_component *component,
+			   struct snd_compr_stream *stream,
 			   struct snd_compr_caps *caps)
 {
 	struct wm_adsp_compr *compr = stream->runtime->private_data;
@@ -3976,7 +3979,8 @@ static int wm_adsp_buffer_get_error(struct wm_adsp_compr_buf *buf)
 	return 0;
 }
 
-int wm_adsp_compr_trigger(struct snd_compr_stream *stream, int cmd)
+int wm_adsp_compr_trigger(struct snd_soc_component *component,
+			  struct snd_compr_stream *stream, int cmd)
 {
 	struct wm_adsp_compr *compr = stream->runtime->private_data;
 	struct wm_adsp *dsp = compr->dsp;
@@ -4139,7 +4143,8 @@ static int wm_adsp_buffer_reenable_irq(struct wm_adsp_compr_buf *buf)
 				    buf->irq_count);
 }
 
-int wm_adsp_compr_pointer(struct snd_compr_stream *stream,
+int wm_adsp_compr_pointer(struct snd_soc_component *component,
+			  struct snd_compr_stream *stream,
 			  struct snd_compr_tstamp *tstamp)
 {
 	struct wm_adsp_compr *compr = stream->runtime->private_data;
@@ -4297,7 +4302,8 @@ static int wm_adsp_compr_read(struct wm_adsp_compr *compr,
 	return ntotal;
 }
 
-int wm_adsp_compr_copy(struct snd_compr_stream *stream, char __user *buf,
+int wm_adsp_compr_copy(struct snd_soc_component *component,
+		       struct snd_compr_stream *stream, char __user *buf,
 		       size_t count)
 {
 	struct wm_adsp_compr *compr = stream->runtime->private_data;
diff --git a/sound/soc/codecs/wm_adsp.h b/sound/soc/codecs/wm_adsp.h
index 4c481cf20275..1996350b817e 100644
--- a/sound/soc/codecs/wm_adsp.h
+++ b/sound/soc/codecs/wm_adsp.h
@@ -190,16 +190,22 @@ int wm_adsp_fw_put(struct snd_kcontrol *kcontrol,
 		   struct snd_ctl_elem_value *ucontrol);
 
 int wm_adsp_compr_open(struct wm_adsp *dsp, struct snd_compr_stream *stream);
-int wm_adsp_compr_free(struct snd_compr_stream *stream);
-int wm_adsp_compr_set_params(struct snd_compr_stream *stream,
+int wm_adsp_compr_free(struct snd_soc_component *component,
+		       struct snd_compr_stream *stream);
+int wm_adsp_compr_set_params(struct snd_soc_component *component,
+			     struct snd_compr_stream *stream,
 			     struct snd_compr_params *params);
-int wm_adsp_compr_get_caps(struct snd_compr_stream *stream,
+int wm_adsp_compr_get_caps(struct snd_soc_component *component,
+			   struct snd_compr_stream *stream,
 			   struct snd_compr_caps *caps);
-int wm_adsp_compr_trigger(struct snd_compr_stream *stream, int cmd);
+int wm_adsp_compr_trigger(struct snd_soc_component *component,
+			  struct snd_compr_stream *stream, int cmd);
 int wm_adsp_compr_handle_irq(struct wm_adsp *dsp);
-int wm_adsp_compr_pointer(struct snd_compr_stream *stream,
+int wm_adsp_compr_pointer(struct snd_soc_component *component,
+			  struct snd_compr_stream *stream,
 			  struct snd_compr_tstamp *tstamp);
-int wm_adsp_compr_copy(struct snd_compr_stream *stream,
+int wm_adsp_compr_copy(struct snd_soc_component *component,
+		       struct snd_compr_stream *stream,
 		       char __user *buf, size_t count);
 int wm_adsp_write_ctl(struct wm_adsp *dsp, const char *name,  int type,
 		      unsigned int alg, void *buf, size_t len);
diff --git a/sound/soc/codecs/zl38060.c b/sound/soc/codecs/zl38060.c
new file mode 100644
index 000000000000..927ad849ad2d
--- /dev/null
+++ b/sound/soc/codecs/zl38060.c
@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Codec driver for Microsemi ZL38060 Connected Home Audio Processor.
+//
+// Copyright(c) 2020 Sven Van Asbroeck
+
+// The ZL38060 is very flexible and configurable. This driver implements only a
+// tiny subset of the chip's possible configurations:
+//
+// - DSP block bypassed: DAI        routed straight to DACs
+//                       microphone routed straight to DAI
+// - chip's internal clock is driven by a 12 MHz external crystal
+// - chip's DAI connected to CPU is I2S, and bit + frame clock master
+// - chip must be strapped for "host boot": in this mode, firmware will be
+//   provided by this driver.
+
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/module.h>
+#include <linux/ihex.h>
+
+#include <sound/pcm_params.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+
+#define DRV_NAME		"zl38060"
+
+#define ZL38_RATES		(SNDRV_PCM_RATE_8000  |\
+				SNDRV_PCM_RATE_16000 |\
+				SNDRV_PCM_RATE_48000)
+#define ZL38_FORMATS		SNDRV_PCM_FMTBIT_S16_LE
+
+#define HBI_FIRMWARE_PAGE	0xFF
+#define ZL38_MAX_RAW_XFER	0x100
+
+#define REG_TDMA_CFG_CLK	0x0262
+#define CFG_CLK_PCLK_SHIFT	4
+#define CFG_CLK_PCLK_MASK	(0x7ff << CFG_CLK_PCLK_SHIFT)
+#define CFG_CLK_PCLK(bits)	((bits - 1) << CFG_CLK_PCLK_SHIFT)
+#define CFG_CLK_MASTER		BIT(15)
+#define CFG_CLK_FSRATE_MASK	0x7
+#define CFG_CLK_FSRATE_8KHZ	0x1
+#define CFG_CLK_FSRATE_16KHZ	0x2
+#define CFG_CLK_FSRATE_48KHZ	0x6
+
+#define REG_CLK_CFG		0x0016
+#define CLK_CFG_SOURCE_XTAL	BIT(15)
+
+#define REG_CLK_STATUS		0x0014
+#define CLK_STATUS_HWRST	BIT(0)
+
+#define REG_PARAM_RESULT	0x0034
+#define PARAM_RESULT_READY	0xD3D3
+
+#define REG_PG255_BASE_HI	0x000C
+#define REG_PG255_OFFS(addr)	((HBI_FIRMWARE_PAGE << 8) | (addr & 0xFF))
+#define REG_FWR_EXEC		0x012C
+
+#define REG_CMD			0x0032
+#define REG_HW_REV		0x0020
+#define REG_FW_PROD		0x0022
+#define REG_FW_REV		0x0024
+
+#define REG_SEMA_FLAGS		0x0006
+#define SEMA_FLAGS_BOOT_CMD	BIT(0)
+#define SEMA_FLAGS_APP_REBOOT	BIT(1)
+
+#define REG_HW_REV		0x0020
+#define REG_FW_PROD		0x0022
+#define REG_FW_REV		0x0024
+#define REG_GPIO_DIR		0x02DC
+#define REG_GPIO_DAT		0x02DA
+
+#define BOOTCMD_LOAD_COMPLETE	0x000D
+#define BOOTCMD_FW_GO		0x0008
+
+#define FIRMWARE_MAJOR		2
+#define FIRMWARE_MINOR		2
+
+struct zl38_codec_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	bool is_stream_in_use[2];
+	struct gpio_chip *gpio_chip;
+};
+
+static int zl38_fw_issue_command(struct regmap *regmap, u16 cmd)
+{
+	unsigned int val;
+	int err;
+
+	err = regmap_read_poll_timeout(regmap, REG_SEMA_FLAGS, val,
+				       !(val & SEMA_FLAGS_BOOT_CMD), 10000,
+				       10000 * 100);
+	if (err)
+		return err;
+	err = regmap_write(regmap, REG_CMD, cmd);
+	if (err)
+		return err;
+	err = regmap_update_bits(regmap, REG_SEMA_FLAGS, SEMA_FLAGS_BOOT_CMD,
+				 SEMA_FLAGS_BOOT_CMD);
+	if (err)
+		return err;
+
+	return regmap_read_poll_timeout(regmap, REG_CMD, val, !val, 10000,
+					10000 * 100);
+}
+
+static int zl38_fw_go(struct regmap *regmap)
+{
+	int err;
+
+	err = zl38_fw_issue_command(regmap, BOOTCMD_LOAD_COMPLETE);
+	if (err)
+		return err;
+
+	return zl38_fw_issue_command(regmap, BOOTCMD_FW_GO);
+}
+
+static int zl38_fw_enter_boot_mode(struct regmap *regmap)
+{
+	unsigned int val;
+	int err;
+
+	err = regmap_update_bits(regmap, REG_CLK_STATUS, CLK_STATUS_HWRST,
+				 CLK_STATUS_HWRST);
+	if (err)
+		return err;
+
+	return regmap_read_poll_timeout(regmap, REG_PARAM_RESULT, val,
+					val == PARAM_RESULT_READY, 1000, 50000);
+}
+
+static int
+zl38_fw_send_data(struct regmap *regmap, u32 addr, const void *data, u16 len)
+{
+	__be32 addr_base = cpu_to_be32(addr & ~0xFF);
+	int err;
+
+	err = regmap_raw_write(regmap, REG_PG255_BASE_HI, &addr_base,
+			       sizeof(addr_base));
+	if (err)
+		return err;
+	return regmap_raw_write(regmap, REG_PG255_OFFS(addr), data, len);
+}
+
+static int zl38_fw_send_xaddr(struct regmap *regmap, const void *data)
+{
+	/* execution address from ihex: 32-bit little endian.
+	 * device register expects 32-bit big endian.
+	 */
+	u32 addr = le32_to_cpup(data);
+	__be32 baddr = cpu_to_be32(addr);
+
+	return regmap_raw_write(regmap, REG_FWR_EXEC, &baddr, sizeof(baddr));
+}
+
+static int zl38_load_firmware(struct device *dev, struct regmap *regmap)
+{
+	const struct ihex_binrec *rec;
+	const struct firmware *fw;
+	u32 addr;
+	u16 len;
+	int err;
+
+	/* how to get this firmware:
+	 * 1. request and download chip firmware from Microsemi
+	 *    (provided by Microsemi in srec format)
+	 * 2. convert downloaded firmware from srec to ihex. Simple tool:
+	 *    https://gitlab.com/TheSven73/s3-to-irec
+	 * 3. convert ihex to binary (.fw) using ihex2fw tool which is included
+	 *    with the Linux kernel sources
+	 */
+	err = request_ihex_firmware(&fw, "zl38060.fw", dev);
+	if (err)
+		return err;
+	err = zl38_fw_enter_boot_mode(regmap);
+	if (err)
+		goto out;
+	rec = (const struct ihex_binrec *)fw->data;
+	while (rec) {
+		addr = be32_to_cpu(rec->addr);
+		len = be16_to_cpu(rec->len);
+		if (addr) {
+			/* regular data ihex record */
+			err = zl38_fw_send_data(regmap, addr, rec->data, len);
+		} else if (len == 4) {
+			/* execution address ihex record */
+			err = zl38_fw_send_xaddr(regmap, rec->data);
+		} else {
+			err = -EINVAL;
+		}
+		if (err)
+			goto out;
+		/* next ! */
+		rec = ihex_next_binrec(rec);
+	}
+	err = zl38_fw_go(regmap);
+
+out:
+	release_firmware(fw);
+	return err;
+}
+
+
+static int zl38_software_reset(struct regmap *regmap)
+{
+	unsigned int val;
+	int err;
+
+	err = regmap_update_bits(regmap, REG_SEMA_FLAGS, SEMA_FLAGS_APP_REBOOT,
+				 SEMA_FLAGS_APP_REBOOT);
+	if (err)
+		return err;
+
+	/* wait for host bus interface to settle.
+	 * Not sure if this is required: Microsemi's vendor driver does this,
+	 * but the firmware manual does not mention it. Leave it in, there's
+	 * little downside, apart from a slower reset.
+	 */
+	msleep(50);
+
+	return regmap_read_poll_timeout(regmap, REG_SEMA_FLAGS, val,
+					!(val & SEMA_FLAGS_APP_REBOOT), 10000,
+					10000 * 100);
+}
+
+static int zl38_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct zl38_codec_priv *priv = snd_soc_dai_get_drvdata(dai);
+	int err;
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		/* firmware default is normal i2s */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		/* firmware default is normal bitclock and frame */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* always 32 bits per frame (= 16 bits/channel, 2 channels) */
+		err = regmap_update_bits(priv->regmap, REG_TDMA_CFG_CLK,
+					 CFG_CLK_MASTER | CFG_CLK_PCLK_MASK,
+					 CFG_CLK_MASTER | CFG_CLK_PCLK(32));
+		if (err)
+			return err;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int zl38_hw_params(struct snd_pcm_substream *substream,
+			  struct snd_pcm_hw_params *params,
+			  struct snd_soc_dai *dai)
+{
+	struct zl38_codec_priv *priv = snd_soc_dai_get_drvdata(dai);
+	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+	unsigned int fsrate;
+	int err;
+
+	/* We cannot change hw_params while the dai is already in use - the
+	 * software reset will corrupt the audio. However, this is not required,
+	 * as the chip's TDM buses are fully symmetric, which mandates identical
+	 * rates, channels, and samplebits for record and playback.
+	 */
+	if (priv->is_stream_in_use[!tx])
+		goto skip_setup;
+
+	switch (params_rate(params)) {
+	case 8000:
+		fsrate = CFG_CLK_FSRATE_8KHZ;
+		break;
+	case 16000:
+		fsrate = CFG_CLK_FSRATE_16KHZ;
+		break;
+	case 48000:
+		fsrate = CFG_CLK_FSRATE_48KHZ;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	err = regmap_update_bits(priv->regmap, REG_TDMA_CFG_CLK,
+				 CFG_CLK_FSRATE_MASK, fsrate);
+	if (err)
+		return err;
+
+	/* chip requires a software reset to apply audio register changes */
+	err = zl38_software_reset(priv->regmap);
+	if (err)
+		return err;
+
+skip_setup:
+	priv->is_stream_in_use[tx] = true;
+
+	return 0;
+}
+
+static int zl38_hw_free(struct snd_pcm_substream *substream,
+			struct snd_soc_dai *dai)
+{
+	struct zl38_codec_priv *priv = snd_soc_dai_get_drvdata(dai);
+	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+
+	priv->is_stream_in_use[tx] = false;
+
+	return 0;
+}
+
+/* stereo bypass with no AEC */
+static const struct reg_sequence cp_config_stereo_bypass[] = {
+	/* interconnects must be programmed first */
+	{ 0x0210, 0x0005 },	/* DAC1   in <= I2S1-L */
+	{ 0x0212, 0x0006 },	/* DAC2   in <= I2S1-R */
+	{ 0x0214, 0x0001 },	/* I2S1-L in <= MIC1   */
+	{ 0x0216, 0x0001 },	/* I2S1-R in <= MIC1   */
+	{ 0x0224, 0x0000 },	/* AEC-S  in <= n/a    */
+	{ 0x0226, 0x0000 },	/* AEC-R  in <= n/a    */
+	/* output enables must be programmed next */
+	{ 0x0202, 0x000F },	/* enable I2S1 + DAC   */
+};
+
+static const struct snd_soc_dai_ops zl38_dai_ops = {
+	.set_fmt = zl38_set_fmt,
+	.hw_params = zl38_hw_params,
+	.hw_free = zl38_hw_free,
+};
+
+static struct snd_soc_dai_driver zl38_dai = {
+	.name = "zl38060-tdma",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = ZL38_RATES,
+		.formats = ZL38_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = ZL38_RATES,
+		.formats = ZL38_FORMATS,
+	},
+	.ops = &zl38_dai_ops,
+	.symmetric_rates = 1,
+	.symmetric_samplebits = 1,
+	.symmetric_channels = 1,
+};
+
+static const struct snd_soc_dapm_widget zl38_dapm_widgets[] = {
+	SND_SOC_DAPM_OUTPUT("DAC1"),
+	SND_SOC_DAPM_OUTPUT("DAC2"),
+
+	SND_SOC_DAPM_INPUT("DMICL"),
+};
+
+static const struct snd_soc_dapm_route zl38_dapm_routes[] = {
+	{ "DAC1",  NULL, "Playback" },
+	{ "DAC2",  NULL, "Playback" },
+
+	{ "Capture",  NULL, "DMICL" },
+};
+
+static const struct snd_soc_component_driver zl38_component_dev = {
+	.dapm_widgets		= zl38_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(zl38_dapm_widgets),
+	.dapm_routes		= zl38_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(zl38_dapm_routes),
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static void chip_gpio_set(struct gpio_chip *c, unsigned int offset, int val)
+{
+	struct regmap *regmap = gpiochip_get_data(c);
+	unsigned int mask = BIT(offset);
+
+	regmap_update_bits(regmap, REG_GPIO_DAT, mask, val ? mask : 0);
+}
+
+static int chip_gpio_get(struct gpio_chip *c, unsigned int offset)
+{
+	struct regmap *regmap = gpiochip_get_data(c);
+	unsigned int mask = BIT(offset);
+	unsigned int val;
+	int err;
+
+	err = regmap_read(regmap, REG_GPIO_DAT, &val);
+	if (err)
+		return err;
+
+	return !!(val & mask);
+}
+
+static int chip_direction_input(struct gpio_chip *c, unsigned int offset)
+{
+	struct regmap *regmap = gpiochip_get_data(c);
+	unsigned int mask = BIT(offset);
+
+	return regmap_update_bits(regmap, REG_GPIO_DIR, mask, 0);
+}
+
+static int
+chip_direction_output(struct gpio_chip *c, unsigned int offset, int val)
+{
+	struct regmap *regmap = gpiochip_get_data(c);
+	unsigned int mask = BIT(offset);
+
+	chip_gpio_set(c, offset, val);
+	return regmap_update_bits(regmap, REG_GPIO_DIR, mask, mask);
+}
+
+static const struct gpio_chip template_chip = {
+	.owner = THIS_MODULE,
+	.label = DRV_NAME,
+
+	.base = -1,
+	.ngpio = 14,
+	.direction_input = chip_direction_input,
+	.direction_output = chip_direction_output,
+	.get = chip_gpio_get,
+	.set = chip_gpio_set,
+
+	.can_sleep = true,
+};
+
+static int zl38_check_revision(struct device *dev, struct regmap *regmap)
+{
+	unsigned int hwrev, fwprod, fwrev;
+	int fw_major, fw_minor, fw_micro;
+	int err;
+
+	err = regmap_read(regmap, REG_HW_REV, &hwrev);
+	if (err)
+		return err;
+	err = regmap_read(regmap, REG_FW_PROD, &fwprod);
+	if (err)
+		return err;
+	err = regmap_read(regmap, REG_FW_REV, &fwrev);
+	if (err)
+		return err;
+
+	fw_major = (fwrev >> 12) & 0xF;
+	fw_minor = (fwrev >>  8) & 0xF;
+	fw_micro = fwrev & 0xFF;
+	dev_info(dev, "hw rev 0x%x, fw product code %d, firmware rev %d.%d.%d",
+		 hwrev & 0x1F, fwprod, fw_major, fw_minor, fw_micro);
+
+	if (fw_major != FIRMWARE_MAJOR || fw_minor < FIRMWARE_MINOR) {
+		dev_err(dev, "unsupported firmware. driver supports %d.%d",
+			FIRMWARE_MAJOR, FIRMWARE_MINOR);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int zl38_bus_read(void *context,
+			 const void *reg_buf, size_t reg_size,
+			 void *val_buf, size_t val_size)
+{
+	struct spi_device *spi = context;
+	const u8 *reg_buf8 = reg_buf;
+	size_t len = 0;
+	u8 offs, page;
+	u8 txbuf[4];
+
+	if (reg_size != 2 || val_size > ZL38_MAX_RAW_XFER)
+		return -EINVAL;
+
+	offs = reg_buf8[1] >> 1;
+	page = reg_buf8[0];
+
+	if (page) {
+		txbuf[len++] = 0xFE;
+		txbuf[len++] = page == HBI_FIRMWARE_PAGE ? 0xFF : page - 1;
+		txbuf[len++] = offs;
+		txbuf[len++] = val_size / 2 - 1;
+	} else {
+		txbuf[len++] = offs | 0x80;
+		txbuf[len++] = val_size / 2 - 1;
+	}
+
+	return spi_write_then_read(spi, txbuf, len, val_buf, val_size);
+}
+
+static int zl38_bus_write(void *context, const void *data, size_t count)
+{
+	struct spi_device *spi = context;
+	u8 buf[4 + ZL38_MAX_RAW_XFER];
+	size_t val_len, len = 0;
+	const u8 *data8 = data;
+	u8 offs, page;
+
+	if (count > (2 + ZL38_MAX_RAW_XFER) || count < 4)
+		return -EINVAL;
+	val_len = count - 2;
+	offs = data8[1] >> 1;
+	page = data8[0];
+
+	if (page) {
+		buf[len++] = 0xFE;
+		buf[len++] = page == HBI_FIRMWARE_PAGE ? 0xFF : page - 1;
+		buf[len++] = offs;
+		buf[len++] = (val_len / 2 - 1) | 0x80;
+	} else {
+		buf[len++] = offs | 0x80;
+		buf[len++] = (val_len / 2 - 1) | 0x80;
+	}
+	memcpy(buf + len, data8 + 2, val_len);
+	len += val_len;
+
+	return spi_write(spi, buf, len);
+}
+
+static const struct regmap_bus zl38_regmap_bus = {
+	.read = zl38_bus_read,
+	.write = zl38_bus_write,
+	.max_raw_write = ZL38_MAX_RAW_XFER,
+	.max_raw_read = ZL38_MAX_RAW_XFER,
+};
+
+static const struct regmap_config zl38_regmap_conf = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_stride = 2,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static int zl38_spi_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct zl38_codec_priv *priv;
+	struct gpio_desc *reset_gpio;
+	int err;
+
+	/* get the chip to a known state by putting it in reset */
+	reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(reset_gpio))
+		return PTR_ERR(reset_gpio);
+	if (reset_gpio) {
+		/* datasheet: need > 10us for a digital + analog reset */
+		usleep_range(15, 50);
+		/* take the chip out of reset */
+		gpiod_set_value_cansleep(reset_gpio, 0);
+		/* datasheet: need > 3ms for digital section to become stable */
+		usleep_range(3000, 10000);
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	dev_set_drvdata(dev, priv);
+	priv->regmap = devm_regmap_init(dev, &zl38_regmap_bus, spi,
+					&zl38_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	err = zl38_load_firmware(dev, priv->regmap);
+	if (err)
+		return err;
+
+	err = zl38_check_revision(dev, priv->regmap);
+	if (err)
+		return err;
+
+	priv->gpio_chip = devm_kmemdup(dev, &template_chip,
+				       sizeof(template_chip), GFP_KERNEL);
+	if (!priv->gpio_chip)
+		return -ENOMEM;
+#ifdef CONFIG_OF_GPIO
+	priv->gpio_chip->of_node = dev->of_node;
+#endif
+	err = devm_gpiochip_add_data(dev, priv->gpio_chip, priv->regmap);
+	if (err)
+		return err;
+
+	/* setup the cross-point switch for stereo bypass */
+	err = regmap_multi_reg_write(priv->regmap, cp_config_stereo_bypass,
+				     ARRAY_SIZE(cp_config_stereo_bypass));
+	if (err)
+		return err;
+	/* setup for 12MHz crystal connected to the chip */
+	err = regmap_update_bits(priv->regmap, REG_CLK_CFG, CLK_CFG_SOURCE_XTAL,
+				 CLK_CFG_SOURCE_XTAL);
+	if (err)
+		return err;
+
+	return devm_snd_soc_register_component(dev, &zl38_component_dev,
+					       &zl38_dai, 1);
+}
+
+static const struct of_device_id zl38_dt_ids[] = {
+	{ .compatible = "mscc,zl38060", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, zl38_dt_ids);
+
+static const struct spi_device_id zl38_spi_ids[] = {
+	{ "zl38060", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, zl38_spi_ids);
+
+static struct spi_driver zl38060_spi_driver = {
+	.driver	= {
+		.name = DRV_NAME,
+		.of_match_table = of_match_ptr(zl38_dt_ids),
+	},
+	.probe = zl38_spi_probe,
+	.id_table = zl38_spi_ids,
+};
+module_spi_driver(zl38060_spi_driver);
+
+MODULE_DESCRIPTION("ASoC ZL38060 driver");
+MODULE_AUTHOR("Sven Van Asbroeck <TheSven73@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 65e8cd4be930..ea7b4787a8af 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -84,6 +84,17 @@ config SND_SOC_FSL_MICFIL
 	  Say Y if you want to add Pulse Density Modulation microphone
 	  interface (MICFIL) support for NXP.
 
+config SND_SOC_FSL_EASRC
+	tristate "Enhanced Asynchronous Sample Rate Converter (EASRC) module support"
+	depends on SND_SOC_FSL_ASRC
+	select REGMAP_MMIO
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	help
+	  Say Y if you want to add Enhanced ASRC support for NXP. The ASRC is
+	  a digital module that converts audio from a source sample rate to a
+	  destination sample rate. It is a new design module compare with the
+	  old ASRC.
+
 config SND_SOC_FSL_UTILS
 	tristate
 
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index 8cde88c72d93..b835eebf8825 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -24,6 +24,7 @@ snd-soc-fsl-micfil-objs := fsl_micfil.o
 snd-soc-fsl-utils-objs := fsl_utils.o
 snd-soc-fsl-dma-objs := fsl_dma.o
 snd-soc-fsl-mqs-objs := fsl_mqs.o
+snd-soc-fsl-easrc-objs := fsl_easrc.o
 
 obj-$(CONFIG_SND_SOC_FSL_AUDMIX) += snd-soc-fsl-audmix.o
 obj-$(CONFIG_SND_SOC_FSL_ASOC_CARD) += snd-soc-fsl-asoc-card.o
@@ -35,6 +36,7 @@ obj-$(CONFIG_SND_SOC_FSL_ESAI) += snd-soc-fsl-esai.o
 obj-$(CONFIG_SND_SOC_FSL_MICFIL) += snd-soc-fsl-micfil.o
 obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o
 obj-$(CONFIG_SND_SOC_FSL_MQS) += snd-soc-fsl-mqs.o
+obj-$(CONFIG_SND_SOC_FSL_EASRC) += snd-soc-fsl-easrc.o
 obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
 
 # MPC5200 Platform Support
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index bb33601fab84..cf4feb835743 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -680,17 +680,23 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
 			goto asrc_fail;
 		}
 
-		ret = of_property_read_u32(asrc_np, "fsl,asrc-width", &width);
+		ret = of_property_read_u32(asrc_np, "fsl,asrc-format",
+					   &priv->asrc_format);
 		if (ret) {
-			dev_err(&pdev->dev, "failed to get output rate\n");
-			ret = -EINVAL;
-			goto asrc_fail;
+			/* Fallback to old binding; translate to asrc_format */
+			ret = of_property_read_u32(asrc_np, "fsl,asrc-width",
+						   &width);
+			if (ret) {
+				dev_err(&pdev->dev,
+					"failed to decide output format\n");
+				goto asrc_fail;
+			}
+
+			if (width == 24)
+				priv->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
+			else
+				priv->asrc_format = SNDRV_PCM_FORMAT_S16_LE;
 		}
-
-		if (width == 24)
-			priv->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
-		else
-			priv->asrc_format = SNDRV_PCM_FORMAT_S16_LE;
 	}
 
 	/* Finish card registering */
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 0dcebc24c312..067a54ab554f 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -21,10 +21,10 @@
 #define IDEAL_RATIO_DECIMAL_DEPTH 26
 
 #define pair_err(fmt, ...) \
-	dev_err(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
+	dev_err(&asrc->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
 
 #define pair_dbg(fmt, ...) \
-	dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
+	dev_dbg(&asrc->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
 
 /* Corresponding to process_option */
 static unsigned int supported_asrc_rate[] = {
@@ -157,15 +157,15 @@ static void fsl_asrc_sel_proc(int inrate, int outrate,
 int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
 {
 	enum asrc_pair_index index = ASRC_INVALID_PAIR;
-	struct fsl_asrc *asrc_priv = pair->asrc_priv;
-	struct device *dev = &asrc_priv->pdev->dev;
+	struct fsl_asrc *asrc = pair->asrc;
+	struct device *dev = &asrc->pdev->dev;
 	unsigned long lock_flags;
 	int i, ret = 0;
 
-	spin_lock_irqsave(&asrc_priv->lock, lock_flags);
+	spin_lock_irqsave(&asrc->lock, lock_flags);
 
 	for (i = ASRC_PAIR_A; i < ASRC_PAIR_MAX_NUM; i++) {
-		if (asrc_priv->pair[i] != NULL)
+		if (asrc->pair[i] != NULL)
 			continue;
 
 		index = i;
@@ -177,17 +177,17 @@ int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
 	if (index == ASRC_INVALID_PAIR) {
 		dev_err(dev, "all pairs are busy now\n");
 		ret = -EBUSY;
-	} else if (asrc_priv->channel_avail < channels) {
+	} else if (asrc->channel_avail < channels) {
 		dev_err(dev, "can't afford required channels: %d\n", channels);
 		ret = -EINVAL;
 	} else {
-		asrc_priv->channel_avail -= channels;
-		asrc_priv->pair[index] = pair;
+		asrc->channel_avail -= channels;
+		asrc->pair[index] = pair;
 		pair->channels = channels;
 		pair->index = index;
 	}
 
-	spin_unlock_irqrestore(&asrc_priv->lock, lock_flags);
+	spin_unlock_irqrestore(&asrc->lock, lock_flags);
 
 	return ret;
 }
@@ -195,25 +195,25 @@ int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
 /**
  * Release ASRC pair
  *
- * It clears the resource from asrc_priv and releases the occupied channels.
+ * It clears the resource from asrc and releases the occupied channels.
  */
 void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
 {
-	struct fsl_asrc *asrc_priv = pair->asrc_priv;
+	struct fsl_asrc *asrc = pair->asrc;
 	enum asrc_pair_index index = pair->index;
 	unsigned long lock_flags;
 
 	/* Make sure the pair is disabled */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
+	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ASRCEi_MASK(index), 0);
 
-	spin_lock_irqsave(&asrc_priv->lock, lock_flags);
+	spin_lock_irqsave(&asrc->lock, lock_flags);
 
-	asrc_priv->channel_avail += pair->channels;
-	asrc_priv->pair[index] = NULL;
+	asrc->channel_avail += pair->channels;
+	asrc->pair[index] = NULL;
 	pair->error = 0;
 
-	spin_unlock_irqrestore(&asrc_priv->lock, lock_flags);
+	spin_unlock_irqrestore(&asrc->lock, lock_flags);
 }
 
 /**
@@ -221,10 +221,10 @@ void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
  */
 static void fsl_asrc_set_watermarks(struct fsl_asrc_pair *pair, u32 in, u32 out)
 {
-	struct fsl_asrc *asrc_priv = pair->asrc_priv;
+	struct fsl_asrc *asrc = pair->asrc;
 	enum asrc_pair_index index = pair->index;
 
-	regmap_update_bits(asrc_priv->regmap, REG_ASRMCR(index),
+	regmap_update_bits(asrc->regmap, REG_ASRMCR(index),
 			   ASRMCRi_EXTTHRSHi_MASK |
 			   ASRMCRi_INFIFO_THRESHOLD_MASK |
 			   ASRMCRi_OUTFIFO_THRESHOLD_MASK,
@@ -257,7 +257,7 @@ static u32 fsl_asrc_cal_asrck_divisor(struct fsl_asrc_pair *pair, u32 div)
 static int fsl_asrc_set_ideal_ratio(struct fsl_asrc_pair *pair,
 				    int inrate, int outrate)
 {
-	struct fsl_asrc *asrc_priv = pair->asrc_priv;
+	struct fsl_asrc *asrc = pair->asrc;
 	enum asrc_pair_index index = pair->index;
 	unsigned long ratio;
 	int i;
@@ -286,8 +286,8 @@ static int fsl_asrc_set_ideal_ratio(struct fsl_asrc_pair *pair,
 			break;
 	}
 
-	regmap_write(asrc_priv->regmap, REG_ASRIDRL(index), ratio);
-	regmap_write(asrc_priv->regmap, REG_ASRIDRH(index), ratio >> 24);
+	regmap_write(asrc->regmap, REG_ASRIDRL(index), ratio);
+	regmap_write(asrc->regmap, REG_ASRIDRH(index), ratio >> 24);
 
 	return 0;
 }
@@ -308,8 +308,10 @@ static int fsl_asrc_set_ideal_ratio(struct fsl_asrc_pair *pair,
  */
 static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 {
-	struct asrc_config *config = pair->config;
-	struct fsl_asrc *asrc_priv = pair->asrc_priv;
+	struct fsl_asrc_pair_priv *pair_priv = pair->private;
+	struct asrc_config *config = pair_priv->config;
+	struct fsl_asrc *asrc = pair->asrc;
+	struct fsl_asrc_priv *asrc_priv = asrc->private;
 	enum asrc_pair_index index = pair->index;
 	enum asrc_word_width input_word_width;
 	enum asrc_word_width output_word_width;
@@ -441,18 +443,18 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 		channels /= 2;
 
 	/* Update channels for current pair */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCNCR,
+	regmap_update_bits(asrc->regmap, REG_ASRCNCR,
 			   ASRCNCR_ANCi_MASK(index, asrc_priv->soc->channel_bits),
 			   ASRCNCR_ANCi(index, channels, asrc_priv->soc->channel_bits));
 
 	/* Default setting: Automatic selection for processing mode */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
+	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ATSi_MASK(index), ASRCTR_ATS(index));
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
+	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_USRi_MASK(index), 0);
 
 	/* Set the input and output clock sources */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCSR,
+	regmap_update_bits(asrc->regmap, REG_ASRCSR,
 			   ASRCSR_AICSi_MASK(index) | ASRCSR_AOCSi_MASK(index),
 			   ASRCSR_AICS(index, clk_index[IN]) |
 			   ASRCSR_AOCS(index, clk_index[OUT]));
@@ -462,19 +464,19 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 	outdiv = fsl_asrc_cal_asrck_divisor(pair, div[OUT]);
 
 	/* Suppose indiv and outdiv includes prescaler, so add its MASK too */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCDR(index),
+	regmap_update_bits(asrc->regmap, REG_ASRCDR(index),
 			   ASRCDRi_AOCPi_MASK(index) | ASRCDRi_AICPi_MASK(index) |
 			   ASRCDRi_AOCDi_MASK(index) | ASRCDRi_AICDi_MASK(index),
 			   ASRCDRi_AOCP(index, outdiv) | ASRCDRi_AICP(index, indiv));
 
 	/* Implement word_width configurations */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRMCR1(index),
+	regmap_update_bits(asrc->regmap, REG_ASRMCR1(index),
 			   ASRMCR1i_OW16_MASK | ASRMCR1i_IWD_MASK,
 			   ASRMCR1i_OW16(output_word_width) |
 			   ASRMCR1i_IWD(input_word_width));
 
 	/* Enable BUFFER STALL */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRMCR(index),
+	regmap_update_bits(asrc->regmap, REG_ASRMCR(index),
 			   ASRMCRi_BUFSTALLi_MASK, ASRMCRi_BUFSTALLi);
 
 	/* Set default thresholds for input and output FIFO */
@@ -486,18 +488,18 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 		return 0;
 
 	/* Clear ASTSx bit to use Ideal Ratio mode */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
+	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ATSi_MASK(index), 0);
 
 	/* Enable Ideal Ratio mode */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
+	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_IDRi_MASK(index) | ASRCTR_USRi_MASK(index),
 			   ASRCTR_IDR(index) | ASRCTR_USR(index));
 
 	fsl_asrc_sel_proc(inrate, outrate, &pre_proc, &post_proc);
 
 	/* Apply configurations for pre- and post-processing */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCFG,
+	regmap_update_bits(asrc->regmap, REG_ASRCFG,
 			   ASRCFG_PREMODi_MASK(index) |	ASRCFG_POSTMODi_MASK(index),
 			   ASRCFG_PREMOD(index, pre_proc) |
 			   ASRCFG_POSTMOD(index, post_proc));
@@ -512,28 +514,28 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
  */
 static void fsl_asrc_start_pair(struct fsl_asrc_pair *pair)
 {
-	struct fsl_asrc *asrc_priv = pair->asrc_priv;
+	struct fsl_asrc *asrc = pair->asrc;
 	enum asrc_pair_index index = pair->index;
 	int reg, retry = 10, i;
 
 	/* Enable the current pair */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
+	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ASRCEi_MASK(index), ASRCTR_ASRCE(index));
 
 	/* Wait for status of initialization */
 	do {
 		udelay(5);
-		regmap_read(asrc_priv->regmap, REG_ASRCFG, &reg);
+		regmap_read(asrc->regmap, REG_ASRCFG, &reg);
 		reg &= ASRCFG_INIRQi_MASK(index);
 	} while (!reg && --retry);
 
 	/* Make the input fifo to ASRC STALL level */
-	regmap_read(asrc_priv->regmap, REG_ASRCNCR, &reg);
+	regmap_read(asrc->regmap, REG_ASRCNCR, &reg);
 	for (i = 0; i < pair->channels * 4; i++)
-		regmap_write(asrc_priv->regmap, REG_ASRDI(index), 0);
+		regmap_write(asrc->regmap, REG_ASRDI(index), 0);
 
 	/* Enable overload interrupt */
-	regmap_write(asrc_priv->regmap, REG_ASRIER, ASRIER_AOLIE);
+	regmap_write(asrc->regmap, REG_ASRIER, ASRIER_AOLIE);
 }
 
 /**
@@ -541,11 +543,11 @@ static void fsl_asrc_start_pair(struct fsl_asrc_pair *pair)
  */
 static void fsl_asrc_stop_pair(struct fsl_asrc_pair *pair)
 {
-	struct fsl_asrc *asrc_priv = pair->asrc_priv;
+	struct fsl_asrc *asrc = pair->asrc;
 	enum asrc_pair_index index = pair->index;
 
 	/* Stop the current pair */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
+	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ASRCEi_MASK(index), 0);
 }
 
@@ -554,20 +556,21 @@ static void fsl_asrc_stop_pair(struct fsl_asrc_pair *pair)
  */
 struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir)
 {
-	struct fsl_asrc *asrc_priv = pair->asrc_priv;
+	struct fsl_asrc *asrc = pair->asrc;
 	enum asrc_pair_index index = pair->index;
 	char name[4];
 
 	sprintf(name, "%cx%c", dir == IN ? 'r' : 't', index + 'a');
 
-	return dma_request_slave_channel(&asrc_priv->pdev->dev, name);
+	return dma_request_slave_channel(&asrc->pdev->dev, name);
 }
 EXPORT_SYMBOL_GPL(fsl_asrc_get_dma_channel);
 
 static int fsl_asrc_dai_startup(struct snd_pcm_substream *substream,
 				struct snd_soc_dai *dai)
 {
-	struct fsl_asrc *asrc_priv = snd_soc_dai_get_drvdata(dai);
+	struct fsl_asrc *asrc = snd_soc_dai_get_drvdata(dai);
+	struct fsl_asrc_priv *asrc_priv = asrc->private;
 
 	/* Odd channel number is not valid for older ASRC (channel_bits==3) */
 	if (asrc_priv->soc->channel_bits == 3)
@@ -583,13 +586,13 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
 				  struct snd_pcm_hw_params *params,
 				  struct snd_soc_dai *dai)
 {
-	struct fsl_asrc *asrc_priv = snd_soc_dai_get_drvdata(dai);
+	struct fsl_asrc *asrc = snd_soc_dai_get_drvdata(dai);
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct fsl_asrc_pair *pair = runtime->private_data;
+	struct fsl_asrc_pair_priv *pair_priv = pair->private;
 	unsigned int channels = params_channels(params);
 	unsigned int rate = params_rate(params);
 	struct asrc_config config;
-	snd_pcm_format_t format;
 	int ret;
 
 	ret = fsl_asrc_request_pair(channels, pair);
@@ -598,12 +601,7 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 	}
 
-	pair->config = &config;
-
-	if (asrc_priv->asrc_width == 16)
-		format = SNDRV_PCM_FORMAT_S16_LE;
-	else
-		format = SNDRV_PCM_FORMAT_S24_LE;
+	pair_priv->config = &config;
 
 	config.pair = pair->index;
 	config.channel_num = channels;
@@ -612,13 +610,13 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		config.input_format   = params_format(params);
-		config.output_format  = format;
+		config.output_format  = asrc->asrc_format;
 		config.input_sample_rate  = rate;
-		config.output_sample_rate = asrc_priv->asrc_rate;
+		config.output_sample_rate = asrc->asrc_rate;
 	} else {
-		config.input_format   = format;
+		config.input_format   = asrc->asrc_format;
 		config.output_format  = params_format(params);
-		config.input_sample_rate  = asrc_priv->asrc_rate;
+		config.input_sample_rate  = asrc->asrc_rate;
 		config.output_sample_rate = rate;
 	}
 
@@ -676,10 +674,10 @@ static const struct snd_soc_dai_ops fsl_asrc_dai_ops = {
 
 static int fsl_asrc_dai_probe(struct snd_soc_dai *dai)
 {
-	struct fsl_asrc *asrc_priv = snd_soc_dai_get_drvdata(dai);
+	struct fsl_asrc *asrc = snd_soc_dai_get_drvdata(dai);
 
-	snd_soc_dai_init_dma_data(dai, &asrc_priv->dma_params_tx,
-				  &asrc_priv->dma_params_rx);
+	snd_soc_dai_init_dma_data(dai, &asrc->dma_params_tx,
+				  &asrc->dma_params_rx);
 
 	return 0;
 }
@@ -858,30 +856,30 @@ static const struct regmap_config fsl_asrc_regmap_config = {
 /**
  * Initialize ASRC registers with a default configurations
  */
-static int fsl_asrc_init(struct fsl_asrc *asrc_priv)
+static int fsl_asrc_init(struct fsl_asrc *asrc)
 {
 	/* Halt ASRC internal FP when input FIFO needs data for pair A, B, C */
-	regmap_write(asrc_priv->regmap, REG_ASRCTR, ASRCTR_ASRCEN);
+	regmap_write(asrc->regmap, REG_ASRCTR, ASRCTR_ASRCEN);
 
 	/* Disable interrupt by default */
-	regmap_write(asrc_priv->regmap, REG_ASRIER, 0x0);
+	regmap_write(asrc->regmap, REG_ASRIER, 0x0);
 
 	/* Apply recommended settings for parameters from Reference Manual */
-	regmap_write(asrc_priv->regmap, REG_ASRPM1, 0x7fffff);
-	regmap_write(asrc_priv->regmap, REG_ASRPM2, 0x255555);
-	regmap_write(asrc_priv->regmap, REG_ASRPM3, 0xff7280);
-	regmap_write(asrc_priv->regmap, REG_ASRPM4, 0xff7280);
-	regmap_write(asrc_priv->regmap, REG_ASRPM5, 0xff7280);
+	regmap_write(asrc->regmap, REG_ASRPM1, 0x7fffff);
+	regmap_write(asrc->regmap, REG_ASRPM2, 0x255555);
+	regmap_write(asrc->regmap, REG_ASRPM3, 0xff7280);
+	regmap_write(asrc->regmap, REG_ASRPM4, 0xff7280);
+	regmap_write(asrc->regmap, REG_ASRPM5, 0xff7280);
 
 	/* Base address for task queue FIFO. Set to 0x7C */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRTFR1,
+	regmap_update_bits(asrc->regmap, REG_ASRTFR1,
 			   ASRTFR1_TF_BASE_MASK, ASRTFR1_TF_BASE(0xfc));
 
 	/* Set the processing clock for 76KHz to 133M */
-	regmap_write(asrc_priv->regmap, REG_ASR76K, 0x06D6);
+	regmap_write(asrc->regmap, REG_ASR76K, 0x06D6);
 
 	/* Set the processing clock for 56KHz to 133M */
-	return regmap_write(asrc_priv->regmap, REG_ASR56K, 0x0947);
+	return regmap_write(asrc->regmap, REG_ASR56K, 0x0947);
 }
 
 /**
@@ -889,15 +887,15 @@ static int fsl_asrc_init(struct fsl_asrc *asrc_priv)
  */
 static irqreturn_t fsl_asrc_isr(int irq, void *dev_id)
 {
-	struct fsl_asrc *asrc_priv = (struct fsl_asrc *)dev_id;
-	struct device *dev = &asrc_priv->pdev->dev;
+	struct fsl_asrc *asrc = (struct fsl_asrc *)dev_id;
+	struct device *dev = &asrc->pdev->dev;
 	enum asrc_pair_index index;
 	u32 status;
 
-	regmap_read(asrc_priv->regmap, REG_ASRSTR, &status);
+	regmap_read(asrc->regmap, REG_ASRSTR, &status);
 
 	/* Clean overload error */
-	regmap_write(asrc_priv->regmap, REG_ASRSTR, ASRSTR_AOLE);
+	regmap_write(asrc->regmap, REG_ASRSTR, ASRSTR_AOLE);
 
 	/*
 	 * We here use dev_dbg() for all exceptions because ASRC itself does
@@ -905,31 +903,31 @@ static irqreturn_t fsl_asrc_isr(int irq, void *dev_id)
 	 * interrupt would result a ridged conversion.
 	 */
 	for (index = ASRC_PAIR_A; index < ASRC_PAIR_MAX_NUM; index++) {
-		if (!asrc_priv->pair[index])
+		if (!asrc->pair[index])
 			continue;
 
 		if (status & ASRSTR_ATQOL) {
-			asrc_priv->pair[index]->error |= ASRC_TASK_Q_OVERLOAD;
+			asrc->pair[index]->error |= ASRC_TASK_Q_OVERLOAD;
 			dev_dbg(dev, "ASRC Task Queue FIFO overload\n");
 		}
 
 		if (status & ASRSTR_AOOL(index)) {
-			asrc_priv->pair[index]->error |= ASRC_OUTPUT_TASK_OVERLOAD;
+			asrc->pair[index]->error |= ASRC_OUTPUT_TASK_OVERLOAD;
 			pair_dbg("Output Task Overload\n");
 		}
 
 		if (status & ASRSTR_AIOL(index)) {
-			asrc_priv->pair[index]->error |= ASRC_INPUT_TASK_OVERLOAD;
+			asrc->pair[index]->error |= ASRC_INPUT_TASK_OVERLOAD;
 			pair_dbg("Input Task Overload\n");
 		}
 
 		if (status & ASRSTR_AODO(index)) {
-			asrc_priv->pair[index]->error |= ASRC_OUTPUT_BUFFER_OVERFLOW;
+			asrc->pair[index]->error |= ASRC_OUTPUT_BUFFER_OVERFLOW;
 			pair_dbg("Output Data Buffer has overflowed\n");
 		}
 
 		if (status & ASRSTR_AIDU(index)) {
-			asrc_priv->pair[index]->error |= ASRC_INPUT_BUFFER_UNDERRUN;
+			asrc->pair[index]->error |= ASRC_INPUT_BUFFER_UNDERRUN;
 			pair_dbg("Input Data Buffer has underflowed\n");
 		}
 	}
@@ -937,21 +935,33 @@ static irqreturn_t fsl_asrc_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int fsl_asrc_get_fifo_addr(u8 dir, enum asrc_pair_index index)
+{
+	return REG_ASRDx(dir, index);
+}
+
 static int fsl_asrc_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct fsl_asrc *asrc_priv;
+	struct fsl_asrc_priv *asrc_priv;
+	struct fsl_asrc *asrc;
 	struct resource *res;
 	void __iomem *regs;
 	int irq, ret, i;
 	u32 map_idx;
 	char tmp[16];
+	u32 width;
+
+	asrc = devm_kzalloc(&pdev->dev, sizeof(*asrc), GFP_KERNEL);
+	if (!asrc)
+		return -ENOMEM;
 
 	asrc_priv = devm_kzalloc(&pdev->dev, sizeof(*asrc_priv), GFP_KERNEL);
 	if (!asrc_priv)
 		return -ENOMEM;
 
-	asrc_priv->pdev = pdev;
+	asrc->pdev = pdev;
+	asrc->private = asrc_priv;
 
 	/* Get the addresses and IRQ */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -959,13 +969,13 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 	if (IS_ERR(regs))
 		return PTR_ERR(regs);
 
-	asrc_priv->paddr = res->start;
+	asrc->paddr = res->start;
 
-	asrc_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "mem", regs,
-						      &fsl_asrc_regmap_config);
-	if (IS_ERR(asrc_priv->regmap)) {
+	asrc->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "mem", regs,
+						 &fsl_asrc_regmap_config);
+	if (IS_ERR(asrc->regmap)) {
 		dev_err(&pdev->dev, "failed to init regmap\n");
-		return PTR_ERR(asrc_priv->regmap);
+		return PTR_ERR(asrc->regmap);
 	}
 
 	irq = platform_get_irq(pdev, 0);
@@ -973,26 +983,26 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 		return irq;
 
 	ret = devm_request_irq(&pdev->dev, irq, fsl_asrc_isr, 0,
-			       dev_name(&pdev->dev), asrc_priv);
+			       dev_name(&pdev->dev), asrc);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to claim irq %u: %d\n", irq, ret);
 		return ret;
 	}
 
-	asrc_priv->mem_clk = devm_clk_get(&pdev->dev, "mem");
-	if (IS_ERR(asrc_priv->mem_clk)) {
+	asrc->mem_clk = devm_clk_get(&pdev->dev, "mem");
+	if (IS_ERR(asrc->mem_clk)) {
 		dev_err(&pdev->dev, "failed to get mem clock\n");
-		return PTR_ERR(asrc_priv->mem_clk);
+		return PTR_ERR(asrc->mem_clk);
 	}
 
-	asrc_priv->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
-	if (IS_ERR(asrc_priv->ipg_clk)) {
+	asrc->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(asrc->ipg_clk)) {
 		dev_err(&pdev->dev, "failed to get ipg clock\n");
-		return PTR_ERR(asrc_priv->ipg_clk);
+		return PTR_ERR(asrc->ipg_clk);
 	}
 
-	asrc_priv->spba_clk = devm_clk_get(&pdev->dev, "spba");
-	if (IS_ERR(asrc_priv->spba_clk))
+	asrc->spba_clk = devm_clk_get(&pdev->dev, "spba");
+	if (IS_ERR(asrc->spba_clk))
 		dev_warn(&pdev->dev, "failed to get spba clock\n");
 
 	for (i = 0; i < ASRC_CLK_MAX_NUM; i++) {
@@ -1010,6 +1020,13 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	asrc->use_edma = asrc_priv->soc->use_edma;
+	asrc->get_dma_channel = fsl_asrc_get_dma_channel;
+	asrc->request_pair = fsl_asrc_request_pair;
+	asrc->release_pair = fsl_asrc_release_pair;
+	asrc->get_fifo_addr = fsl_asrc_get_fifo_addr;
+	asrc->pair_priv_size = sizeof(struct fsl_asrc_pair_priv);
+
 	if (of_device_is_compatible(np, "fsl,imx35-asrc")) {
 		asrc_priv->clk_map[IN] = input_clk_map_imx35;
 		asrc_priv->clk_map[OUT] = output_clk_map_imx35;
@@ -1037,36 +1054,52 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = fsl_asrc_init(asrc_priv);
+	ret = fsl_asrc_init(asrc);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to init asrc %d\n", ret);
 		return ret;
 	}
 
-	asrc_priv->channel_avail = 10;
+	asrc->channel_avail = 10;
 
 	ret = of_property_read_u32(np, "fsl,asrc-rate",
-				   &asrc_priv->asrc_rate);
+				   &asrc->asrc_rate);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to get output rate\n");
 		return ret;
 	}
 
-	ret = of_property_read_u32(np, "fsl,asrc-width",
-				   &asrc_priv->asrc_width);
+	ret = of_property_read_u32(np, "fsl,asrc-format", &asrc->asrc_format);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to get output width\n");
-		return ret;
+		ret = of_property_read_u32(np, "fsl,asrc-width", &width);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to decide output format\n");
+			return ret;
+		}
+
+		switch (width) {
+		case 16:
+			asrc->asrc_format = SNDRV_PCM_FORMAT_S16_LE;
+			break;
+		case 24:
+			asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
+			break;
+		default:
+			dev_warn(&pdev->dev,
+				 "unsupported width, use default S24_LE\n");
+			asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
+			break;
+		}
 	}
 
-	if (asrc_priv->asrc_width != 16 && asrc_priv->asrc_width != 24) {
-		dev_warn(&pdev->dev, "unsupported width, switching to 24bit\n");
-		asrc_priv->asrc_width = 24;
+	if (!(FSL_ASRC_FORMATS & (1ULL << asrc->asrc_format))) {
+		dev_warn(&pdev->dev, "unsupported width, use default S24_LE\n");
+		asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
 	}
 
-	platform_set_drvdata(pdev, asrc_priv);
+	platform_set_drvdata(pdev, asrc);
 	pm_runtime_enable(&pdev->dev);
-	spin_lock_init(&asrc_priv->lock);
+	spin_lock_init(&asrc->lock);
 
 	ret = devm_snd_soc_register_component(&pdev->dev, &fsl_asrc_component,
 					      &fsl_asrc_dai, 1);
@@ -1081,17 +1114,18 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int fsl_asrc_runtime_resume(struct device *dev)
 {
-	struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
+	struct fsl_asrc *asrc = dev_get_drvdata(dev);
+	struct fsl_asrc_priv *asrc_priv = asrc->private;
 	int i, ret;
 
-	ret = clk_prepare_enable(asrc_priv->mem_clk);
+	ret = clk_prepare_enable(asrc->mem_clk);
 	if (ret)
 		return ret;
-	ret = clk_prepare_enable(asrc_priv->ipg_clk);
+	ret = clk_prepare_enable(asrc->ipg_clk);
 	if (ret)
 		goto disable_mem_clk;
-	if (!IS_ERR(asrc_priv->spba_clk)) {
-		ret = clk_prepare_enable(asrc_priv->spba_clk);
+	if (!IS_ERR(asrc->spba_clk)) {
+		ret = clk_prepare_enable(asrc->spba_clk);
 		if (ret)
 			goto disable_ipg_clk;
 	}
@@ -1106,26 +1140,27 @@ static int fsl_asrc_runtime_resume(struct device *dev)
 disable_asrck_clk:
 	for (i--; i >= 0; i--)
 		clk_disable_unprepare(asrc_priv->asrck_clk[i]);
-	if (!IS_ERR(asrc_priv->spba_clk))
-		clk_disable_unprepare(asrc_priv->spba_clk);
+	if (!IS_ERR(asrc->spba_clk))
+		clk_disable_unprepare(asrc->spba_clk);
 disable_ipg_clk:
-	clk_disable_unprepare(asrc_priv->ipg_clk);
+	clk_disable_unprepare(asrc->ipg_clk);
 disable_mem_clk:
-	clk_disable_unprepare(asrc_priv->mem_clk);
+	clk_disable_unprepare(asrc->mem_clk);
 	return ret;
 }
 
 static int fsl_asrc_runtime_suspend(struct device *dev)
 {
-	struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
+	struct fsl_asrc *asrc = dev_get_drvdata(dev);
+	struct fsl_asrc_priv *asrc_priv = asrc->private;
 	int i;
 
 	for (i = 0; i < ASRC_CLK_MAX_NUM; i++)
 		clk_disable_unprepare(asrc_priv->asrck_clk[i]);
-	if (!IS_ERR(asrc_priv->spba_clk))
-		clk_disable_unprepare(asrc_priv->spba_clk);
-	clk_disable_unprepare(asrc_priv->ipg_clk);
-	clk_disable_unprepare(asrc_priv->mem_clk);
+	if (!IS_ERR(asrc->spba_clk))
+		clk_disable_unprepare(asrc->spba_clk);
+	clk_disable_unprepare(asrc->ipg_clk);
+	clk_disable_unprepare(asrc->mem_clk);
 
 	return 0;
 }
@@ -1134,37 +1169,39 @@ static int fsl_asrc_runtime_suspend(struct device *dev)
 #ifdef CONFIG_PM_SLEEP
 static int fsl_asrc_suspend(struct device *dev)
 {
-	struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
+	struct fsl_asrc *asrc = dev_get_drvdata(dev);
+	struct fsl_asrc_priv *asrc_priv = asrc->private;
 
-	regmap_read(asrc_priv->regmap, REG_ASRCFG,
+	regmap_read(asrc->regmap, REG_ASRCFG,
 		    &asrc_priv->regcache_cfg);
 
-	regcache_cache_only(asrc_priv->regmap, true);
-	regcache_mark_dirty(asrc_priv->regmap);
+	regcache_cache_only(asrc->regmap, true);
+	regcache_mark_dirty(asrc->regmap);
 
 	return 0;
 }
 
 static int fsl_asrc_resume(struct device *dev)
 {
-	struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
+	struct fsl_asrc *asrc = dev_get_drvdata(dev);
+	struct fsl_asrc_priv *asrc_priv = asrc->private;
 	u32 asrctr;
 
 	/* Stop all pairs provisionally */
-	regmap_read(asrc_priv->regmap, REG_ASRCTR, &asrctr);
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
+	regmap_read(asrc->regmap, REG_ASRCTR, &asrctr);
+	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ASRCEi_ALL_MASK, 0);
 
 	/* Restore all registers */
-	regcache_cache_only(asrc_priv->regmap, false);
-	regcache_sync(asrc_priv->regmap);
+	regcache_cache_only(asrc->regmap, false);
+	regcache_sync(asrc->regmap);
 
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCFG,
+	regmap_update_bits(asrc->regmap, REG_ASRCFG,
 			   ASRCFG_NDPRi_ALL_MASK | ASRCFG_POSTMODi_ALL_MASK |
 			   ASRCFG_PREMODi_ALL_MASK, asrc_priv->regcache_cfg);
 
 	/* Restart enabled pairs */
-	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
+	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ASRCEi_ALL_MASK, asrctr);
 
 	return 0;
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 8a821132d9d0..86d2422ad606 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -10,8 +10,7 @@
 #ifndef _FSL_ASRC_H
 #define _FSL_ASRC_H
 
-#define IN	0
-#define OUT	1
+#include  "fsl_asrc_common.h"
 
 #define ASRC_DMA_BUFFER_NUM		2
 #define ASRC_INPUTFIFO_THRESHOLD	32
@@ -283,14 +282,6 @@
 #define ASRMCR1i_OW16_MASK		(1 << ASRMCR1i_OW16_SHIFT)
 #define ASRMCR1i_OW16(v)		((v) << ASRMCR1i_OW16_SHIFT)
 
-
-enum asrc_pair_index {
-	ASRC_INVALID_PAIR = -1,
-	ASRC_PAIR_A = 0,
-	ASRC_PAIR_B = 1,
-	ASRC_PAIR_C = 2,
-};
-
 #define ASRC_PAIR_MAX_NUM	(ASRC_PAIR_C + 1)
 
 enum asrc_inclk {
@@ -446,83 +437,28 @@ struct fsl_asrc_soc_data {
 };
 
 /**
- * fsl_asrc_pair: ASRC Pair private data
+ * fsl_asrc_pair_priv: ASRC Pair private data
  *
- * @asrc_priv: pointer to its parent module
  * @config: configuration profile
- * @error: error record
- * @index: pair index (ASRC_PAIR_A, ASRC_PAIR_B, ASRC_PAIR_C)
- * @channels: occupied channel number
- * @desc: input and output dma descriptors
- * @dma_chan: inputer and output DMA channels
- * @dma_data: private dma data
- * @pos: hardware pointer position
- * @private: pair private area
  */
-struct fsl_asrc_pair {
-	struct fsl_asrc *asrc_priv;
+struct fsl_asrc_pair_priv {
 	struct asrc_config *config;
-	unsigned int error;
-
-	enum asrc_pair_index index;
-	unsigned int channels;
-
-	struct dma_async_tx_descriptor *desc[2];
-	struct dma_chan *dma_chan[2];
-	struct imx_dma_data dma_data;
-	unsigned int pos;
-
-	void *private;
 };
 
 /**
- * fsl_asrc_pair: ASRC private data
+ * fsl_asrc_priv: ASRC private data
  *
- * @dma_params_rx: DMA parameters for receive channel
- * @dma_params_tx: DMA parameters for transmit channel
- * @pdev: platform device pointer
- * @regmap: regmap handler
- * @paddr: physical address to the base address of registers
- * @mem_clk: clock source to access register
- * @ipg_clk: clock source to drive peripheral
- * @spba_clk: SPBA clock (optional, depending on SoC design)
  * @asrck_clk: clock sources to driver ASRC internal logic
- * @lock: spin lock for resource protection
- * @pair: pair pointers
  * @soc: soc specific data
- * @channel_avail: non-occupied channel numbers
  * @clk_map: clock map for input/output clock
- * @asrc_rate: default sample rate for ASoC Back-Ends
- * @asrc_width: default sample width for ASoC Back-Ends
  * @regcache_cfg: store register value of REG_ASRCFG
  */
-struct fsl_asrc {
-	struct snd_dmaengine_dai_dma_data dma_params_rx;
-	struct snd_dmaengine_dai_dma_data dma_params_tx;
-	struct platform_device *pdev;
-	struct regmap *regmap;
-	unsigned long paddr;
-	struct clk *mem_clk;
-	struct clk *ipg_clk;
-	struct clk *spba_clk;
+struct fsl_asrc_priv {
 	struct clk *asrck_clk[ASRC_CLK_MAX_NUM];
-	spinlock_t lock;
-
-	struct fsl_asrc_pair *pair[ASRC_PAIR_MAX_NUM];
 	const struct fsl_asrc_soc_data *soc;
-	unsigned int channel_avail;
 	unsigned char *clk_map[2];
 
-	int asrc_rate;
-	int asrc_width;
-
 	u32 regcache_cfg;
 };
 
-#define DRV_NAME "fsl-asrc-dai"
-extern struct snd_soc_component_driver fsl_asrc_component;
-struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir);
-int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair);
-void fsl_asrc_release_pair(struct fsl_asrc_pair *pair);
-
 #endif /* _FSL_ASRC_H */
diff --git a/sound/soc/fsl/fsl_asrc_common.h b/sound/soc/fsl/fsl_asrc_common.h
new file mode 100644
index 000000000000..77665b15c8db
--- /dev/null
+++ b/sound/soc/fsl/fsl_asrc_common.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2019 NXP
+ *
+ */
+
+#ifndef _FSL_ASRC_COMMON_H
+#define _FSL_ASRC_COMMON_H
+
+/* directions */
+#define IN	0
+#define OUT	1
+
+enum asrc_pair_index {
+	ASRC_INVALID_PAIR = -1,
+	ASRC_PAIR_A = 0,
+	ASRC_PAIR_B = 1,
+	ASRC_PAIR_C = 2,
+	ASRC_PAIR_D = 3,
+};
+
+#define PAIR_CTX_NUM  0x4
+
+/**
+ * fsl_asrc_pair: ASRC Pair common data
+ *
+ * @asrc: pointer to its parent module
+ * @error: error record
+ * @index: pair index (ASRC_PAIR_A, ASRC_PAIR_B, ASRC_PAIR_C)
+ * @channels: occupied channel number
+ * @desc: input and output dma descriptors
+ * @dma_chan: inputer and output DMA channels
+ * @dma_data: private dma data
+ * @pos: hardware pointer position
+ * @private: pair private area
+ */
+struct fsl_asrc_pair {
+	struct fsl_asrc *asrc;
+	unsigned int error;
+
+	enum asrc_pair_index index;
+	unsigned int channels;
+
+	struct dma_async_tx_descriptor *desc[2];
+	struct dma_chan *dma_chan[2];
+	struct imx_dma_data dma_data;
+	unsigned int pos;
+
+	void *private;
+};
+
+/**
+ * fsl_asrc: ASRC common data
+ *
+ * @dma_params_rx: DMA parameters for receive channel
+ * @dma_params_tx: DMA parameters for transmit channel
+ * @pdev: platform device pointer
+ * @regmap: regmap handler
+ * @paddr: physical address to the base address of registers
+ * @mem_clk: clock source to access register
+ * @ipg_clk: clock source to drive peripheral
+ * @spba_clk: SPBA clock (optional, depending on SoC design)
+ * @lock: spin lock for resource protection
+ * @pair: pair pointers
+ * @channel_avail: non-occupied channel numbers
+ * @asrc_rate: default sample rate for ASoC Back-Ends
+ * @asrc_format: default sample format for ASoC Back-Ends
+ * @use_edma: edma is used
+ * @get_dma_channel: function pointer
+ * @request_pair: function pointer
+ * @release_pair: function pointer
+ * @get_fifo_addr: function pointer
+ * @pair_priv_size: size of pair private struct.
+ * @private: private data structure
+ */
+struct fsl_asrc {
+	struct snd_dmaengine_dai_dma_data dma_params_rx;
+	struct snd_dmaengine_dai_dma_data dma_params_tx;
+	struct platform_device *pdev;
+	struct regmap *regmap;
+	unsigned long paddr;
+	struct clk *mem_clk;
+	struct clk *ipg_clk;
+	struct clk *spba_clk;
+	spinlock_t lock;      /* spin lock for resource protection */
+
+	struct fsl_asrc_pair *pair[PAIR_CTX_NUM];
+	unsigned int channel_avail;
+
+	int asrc_rate;
+	snd_pcm_format_t asrc_format;
+	bool use_edma;
+
+	struct dma_chan *(*get_dma_channel)(struct fsl_asrc_pair *pair, bool dir);
+	int (*request_pair)(int channels, struct fsl_asrc_pair *pair);
+	void (*release_pair)(struct fsl_asrc_pair *pair);
+	int (*get_fifo_addr)(u8 dir, enum asrc_pair_index index);
+	size_t pair_priv_size;
+
+	void *private;
+};
+
+#define DRV_NAME "fsl-asrc-dai"
+extern struct snd_soc_component_driver fsl_asrc_component;
+
+#endif /* _FSL_ASRC_COMMON_H */
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index e7178817d7a7..e5d1b218acf8 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -12,7 +12,7 @@
 #include <sound/dmaengine_pcm.h>
 #include <sound/pcm_params.h>
 
-#include "fsl_asrc.h"
+#include "fsl_asrc_common.h"
 
 #define FSL_ASRC_DMABUF_SIZE	(256 * 1024)
 
@@ -135,7 +135,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	struct snd_dmaengine_dai_dma_data *dma_params_be = NULL;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct fsl_asrc_pair *pair = runtime->private_data;
-	struct fsl_asrc *asrc_priv = pair->asrc_priv;
+	struct fsl_asrc *asrc = pair->asrc;
 	struct dma_slave_config config_fe, config_be;
 	enum asrc_pair_index index = pair->index;
 	struct device *dev = component->dev;
@@ -146,7 +146,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	struct device *dev_be;
 	u8 dir = tx ? OUT : IN;
 	dma_cap_mask_t mask;
-	int ret;
+	int ret, width;
 
 	/* Fetch the Back-End dma_data from DPCM */
 	for_each_dpcm_be(rtd, stream, dpcm) {
@@ -170,10 +170,10 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 
 	/* Override dma_data of the Front-End and config its dmaengine */
 	dma_params_fe = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
-	dma_params_fe->addr = asrc_priv->paddr + REG_ASRDx(!dir, index);
+	dma_params_fe->addr = asrc->paddr + asrc->get_fifo_addr(!dir, index);
 	dma_params_fe->maxburst = dma_params_be->maxburst;
 
-	pair->dma_chan[!dir] = fsl_asrc_get_dma_channel(pair, !dir);
+	pair->dma_chan[!dir] = asrc->get_dma_channel(pair, !dir);
 	if (!pair->dma_chan[!dir]) {
 		dev_err(dev, "failed to request DMA channel\n");
 		return -EINVAL;
@@ -203,7 +203,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	 * need to configure dma_request and dma_request2, but get dma_chan via
 	 * dma_request_slave_channel directly with dma name of Front-End device
 	 */
-	if (!asrc_priv->soc->use_edma) {
+	if (!asrc->use_edma) {
 		/* Get DMA request of Back-End */
 		tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
 		tmp_data = tmp_chan->private;
@@ -211,7 +211,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 		dma_release_channel(tmp_chan);
 
 		/* Get DMA request of Front-End */
-		tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
+		tmp_chan = asrc->get_dma_channel(pair, dir);
 		tmp_data = tmp_chan->private;
 		pair->dma_data.dma_request2 = tmp_data->dma_request;
 		pair->dma_data.peripheral_type = tmp_data->peripheral_type;
@@ -222,7 +222,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 			dma_request_channel(mask, filter, &pair->dma_data);
 	} else {
 		pair->dma_chan[dir] =
-			fsl_asrc_get_dma_channel(pair, dir);
+			asrc->get_dma_channel(pair, dir);
 	}
 
 	if (!pair->dma_chan[dir]) {
@@ -230,10 +230,19 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 		return -EINVAL;
 	}
 
-	if (asrc_priv->asrc_width == 16)
+	width = snd_pcm_format_physical_width(asrc->asrc_format);
+	if (width < 8 || width > 64)
+		return -EINVAL;
+	else if (width == 8)
+		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	else if (width == 16)
 		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
-	else
+	else if (width == 24)
+		buswidth = DMA_SLAVE_BUSWIDTH_3_BYTES;
+	else if (width <= 32)
 		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	else
+		buswidth = DMA_SLAVE_BUSWIDTH_8_BYTES;
 
 	config_be.direction = DMA_DEV_TO_DEV;
 	config_be.src_addr_width = buswidth;
@@ -242,10 +251,10 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	config_be.dst_maxburst = dma_params_be->maxburst;
 
 	if (tx) {
-		config_be.src_addr = asrc_priv->paddr + REG_ASRDO(index);
+		config_be.src_addr = asrc->paddr + asrc->get_fifo_addr(OUT, index);
 		config_be.dst_addr = dma_params_be->addr;
 	} else {
-		config_be.dst_addr = asrc_priv->paddr + REG_ASRDI(index);
+		config_be.dst_addr = asrc->paddr + asrc->get_fifo_addr(IN, index);
 		config_be.src_addr = dma_params_be->addr;
 	}
 
@@ -288,7 +297,7 @@ static int fsl_asrc_dma_startup(struct snd_soc_component *component,
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_dmaengine_dai_dma_data *dma_data;
 	struct device *dev = component->dev;
-	struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
+	struct fsl_asrc *asrc = dev_get_drvdata(dev);
 	struct fsl_asrc_pair *pair;
 	struct dma_chan *tmp_chan = NULL;
 	u8 dir = tx ? OUT : IN;
@@ -302,11 +311,12 @@ static int fsl_asrc_dma_startup(struct snd_soc_component *component,
 		return ret;
 	}
 
-	pair = kzalloc(sizeof(struct fsl_asrc_pair), GFP_KERNEL);
+	pair = kzalloc(sizeof(*pair) + asrc->pair_priv_size, GFP_KERNEL);
 	if (!pair)
 		return -ENOMEM;
 
-	pair->asrc_priv = asrc_priv;
+	pair->asrc = asrc;
+	pair->private = (void *)pair + sizeof(struct fsl_asrc_pair);
 
 	runtime->private_data = pair;
 
@@ -314,14 +324,14 @@ static int fsl_asrc_dma_startup(struct snd_soc_component *component,
 	 * Request pair function needs channel num as input, for this
 	 * dummy pair, we just request "1" channel temporarily.
 	 */
-	ret = fsl_asrc_request_pair(1, pair);
+	ret = asrc->request_pair(1, pair);
 	if (ret < 0) {
 		dev_err(dev, "failed to request asrc pair\n");
 		goto req_pair_err;
 	}
 
 	/* Request a dummy dma channel, which will be released later. */
-	tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
+	tmp_chan = asrc->get_dma_channel(pair, dir);
 	if (!tmp_chan) {
 		dev_err(dev, "failed to get dma channel\n");
 		ret = -EINVAL;
@@ -347,7 +357,7 @@ static int fsl_asrc_dma_startup(struct snd_soc_component *component,
 	dma_release_channel(tmp_chan);
 
 dma_chan_err:
-	fsl_asrc_release_pair(pair);
+	asrc->release_pair(pair);
 
 req_pair_err:
 	if (release_pair)
@@ -361,15 +371,15 @@ static int fsl_asrc_dma_shutdown(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct fsl_asrc_pair *pair = runtime->private_data;
-	struct fsl_asrc *asrc_priv;
+	struct fsl_asrc *asrc;
 
 	if (!pair)
 		return 0;
 
-	asrc_priv = pair->asrc_priv;
+	asrc = pair->asrc;
 
-	if (asrc_priv->pair[pair->index] == pair)
-		asrc_priv->pair[pair->index] = NULL;
+	if (asrc->pair[pair->index] == pair)
+		asrc->pair[pair->index] = NULL;
 
 	kfree(pair);
 
diff --git a/sound/soc/fsl/fsl_easrc.c b/sound/soc/fsl/fsl_easrc.c
new file mode 100644
index 000000000000..c6b5eb2d2af7
--- /dev/null
+++ b/sound/soc/fsl/fsl_easrc.c
@@ -0,0 +1,2117 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright 2019 NXP
+
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/kobject.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/miscdevice.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/sched/signal.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/gcd.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/core.h>
+
+#include "fsl_easrc.h"
+#include "imx-pcm.h"
+
+#define FSL_EASRC_FORMATS       (SNDRV_PCM_FMTBIT_S16_LE | \
+				 SNDRV_PCM_FMTBIT_U16_LE | \
+				 SNDRV_PCM_FMTBIT_S24_LE | \
+				 SNDRV_PCM_FMTBIT_S24_3LE | \
+				 SNDRV_PCM_FMTBIT_U24_LE | \
+				 SNDRV_PCM_FMTBIT_U24_3LE | \
+				 SNDRV_PCM_FMTBIT_S32_LE | \
+				 SNDRV_PCM_FMTBIT_U32_LE | \
+				 SNDRV_PCM_FMTBIT_S20_3LE | \
+				 SNDRV_PCM_FMTBIT_U20_3LE | \
+				 SNDRV_PCM_FMTBIT_FLOAT_LE)
+
+static int fsl_easrc_iec958_put_bits(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_kcontrol_chip(kcontrol);
+	struct fsl_asrc *easrc = snd_soc_component_get_drvdata(comp);
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	struct soc_mreg_control *mc =
+		(struct soc_mreg_control *)kcontrol->private_value;
+	unsigned int regval = ucontrol->value.integer.value[0];
+
+	easrc_priv->bps_iec958[mc->regbase] = regval;
+
+	return 0;
+}
+
+static int fsl_easrc_iec958_get_bits(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_kcontrol_chip(kcontrol);
+	struct fsl_asrc *easrc = snd_soc_component_get_drvdata(comp);
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	struct soc_mreg_control *mc =
+		(struct soc_mreg_control *)kcontrol->private_value;
+
+	ucontrol->value.enumerated.item[0] = easrc_priv->bps_iec958[mc->regbase];
+
+	return 0;
+}
+
+static int fsl_easrc_get_reg(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct soc_mreg_control *mc =
+		(struct soc_mreg_control *)kcontrol->private_value;
+	unsigned int regval;
+	int ret;
+
+	ret = snd_soc_component_read(component, mc->regbase, &regval);
+	if (ret < 0)
+		return ret;
+
+	ucontrol->value.integer.value[0] = regval;
+
+	return 0;
+}
+
+static int fsl_easrc_set_reg(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct soc_mreg_control *mc =
+		(struct soc_mreg_control *)kcontrol->private_value;
+	unsigned int regval = ucontrol->value.integer.value[0];
+	int ret;
+
+	ret = snd_soc_component_write(component, mc->regbase, regval);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+#define SOC_SINGLE_REG_RW(xname, xreg) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.info = snd_soc_info_xr_sx, .get = fsl_easrc_get_reg, \
+	.put = fsl_easrc_set_reg, \
+	.private_value = (unsigned long)&(struct soc_mreg_control) \
+		{ .regbase = xreg, .regcount = 1, .nbits = 32, \
+		  .invert = 0, .min = 0, .max = 0xffffffff, } }
+
+#define SOC_SINGLE_VAL_RW(xname, xreg) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.info = snd_soc_info_xr_sx, .get = fsl_easrc_iec958_get_bits, \
+	.put = fsl_easrc_iec958_put_bits, \
+	.private_value = (unsigned long)&(struct soc_mreg_control) \
+		{ .regbase = xreg, .regcount = 1, .nbits = 32, \
+		  .invert = 0, .min = 0, .max = 2, } }
+
+static const struct snd_kcontrol_new fsl_easrc_snd_controls[] = {
+	SOC_SINGLE("Context 0 Dither Switch", REG_EASRC_COC(0), 0, 1, 0),
+	SOC_SINGLE("Context 1 Dither Switch", REG_EASRC_COC(1), 0, 1, 0),
+	SOC_SINGLE("Context 2 Dither Switch", REG_EASRC_COC(2), 0, 1, 0),
+	SOC_SINGLE("Context 3 Dither Switch", REG_EASRC_COC(3), 0, 1, 0),
+
+	SOC_SINGLE("Context 0 IEC958 Validity", REG_EASRC_COC(0), 2, 1, 0),
+	SOC_SINGLE("Context 1 IEC958 Validity", REG_EASRC_COC(1), 2, 1, 0),
+	SOC_SINGLE("Context 2 IEC958 Validity", REG_EASRC_COC(2), 2, 1, 0),
+	SOC_SINGLE("Context 3 IEC958 Validity", REG_EASRC_COC(3), 2, 1, 0),
+
+	SOC_SINGLE_VAL_RW("Context 0 IEC958 Bits Per Sample", 0),
+	SOC_SINGLE_VAL_RW("Context 1 IEC958 Bits Per Sample", 1),
+	SOC_SINGLE_VAL_RW("Context 2 IEC958 Bits Per Sample", 2),
+	SOC_SINGLE_VAL_RW("Context 3 IEC958 Bits Per Sample", 3),
+
+	SOC_SINGLE_REG_RW("Context 0 IEC958 CS0", REG_EASRC_CS0(0)),
+	SOC_SINGLE_REG_RW("Context 1 IEC958 CS0", REG_EASRC_CS0(1)),
+	SOC_SINGLE_REG_RW("Context 2 IEC958 CS0", REG_EASRC_CS0(2)),
+	SOC_SINGLE_REG_RW("Context 3 IEC958 CS0", REG_EASRC_CS0(3)),
+	SOC_SINGLE_REG_RW("Context 0 IEC958 CS1", REG_EASRC_CS1(0)),
+	SOC_SINGLE_REG_RW("Context 1 IEC958 CS1", REG_EASRC_CS1(1)),
+	SOC_SINGLE_REG_RW("Context 2 IEC958 CS1", REG_EASRC_CS1(2)),
+	SOC_SINGLE_REG_RW("Context 3 IEC958 CS1", REG_EASRC_CS1(3)),
+	SOC_SINGLE_REG_RW("Context 0 IEC958 CS2", REG_EASRC_CS2(0)),
+	SOC_SINGLE_REG_RW("Context 1 IEC958 CS2", REG_EASRC_CS2(1)),
+	SOC_SINGLE_REG_RW("Context 2 IEC958 CS2", REG_EASRC_CS2(2)),
+	SOC_SINGLE_REG_RW("Context 3 IEC958 CS2", REG_EASRC_CS2(3)),
+	SOC_SINGLE_REG_RW("Context 0 IEC958 CS3", REG_EASRC_CS3(0)),
+	SOC_SINGLE_REG_RW("Context 1 IEC958 CS3", REG_EASRC_CS3(1)),
+	SOC_SINGLE_REG_RW("Context 2 IEC958 CS3", REG_EASRC_CS3(2)),
+	SOC_SINGLE_REG_RW("Context 3 IEC958 CS3", REG_EASRC_CS3(3)),
+	SOC_SINGLE_REG_RW("Context 0 IEC958 CS4", REG_EASRC_CS4(0)),
+	SOC_SINGLE_REG_RW("Context 1 IEC958 CS4", REG_EASRC_CS4(1)),
+	SOC_SINGLE_REG_RW("Context 2 IEC958 CS4", REG_EASRC_CS4(2)),
+	SOC_SINGLE_REG_RW("Context 3 IEC958 CS4", REG_EASRC_CS4(3)),
+	SOC_SINGLE_REG_RW("Context 0 IEC958 CS5", REG_EASRC_CS5(0)),
+	SOC_SINGLE_REG_RW("Context 1 IEC958 CS5", REG_EASRC_CS5(1)),
+	SOC_SINGLE_REG_RW("Context 2 IEC958 CS5", REG_EASRC_CS5(2)),
+	SOC_SINGLE_REG_RW("Context 3 IEC958 CS5", REG_EASRC_CS5(3)),
+};
+
+/*
+ * fsl_easrc_set_rs_ratio
+ *
+ * According to the resample taps, calculate the resample ratio
+ * ratio = in_rate / out_rate
+ */
+static int fsl_easrc_set_rs_ratio(struct fsl_asrc_pair *ctx)
+{
+	struct fsl_asrc *easrc = ctx->asrc;
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	struct fsl_easrc_ctx_priv *ctx_priv = ctx->private;
+	unsigned int in_rate = ctx_priv->in_params.norm_rate;
+	unsigned int out_rate = ctx_priv->out_params.norm_rate;
+	unsigned int int_bits;
+	unsigned int frac_bits;
+	u64 val;
+	u32 *r;
+
+	switch (easrc_priv->rs_num_taps) {
+	case EASRC_RS_32_TAPS:
+		int_bits = 5;
+		frac_bits = 39;
+		break;
+	case EASRC_RS_64_TAPS:
+		int_bits = 6;
+		frac_bits = 38;
+		break;
+	case EASRC_RS_128_TAPS:
+		int_bits = 7;
+		frac_bits = 37;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = (u64)in_rate << frac_bits;
+	do_div(val, out_rate);
+	r = (uint32_t *)&val;
+
+	if (r[1] & 0xFFFFF000) {
+		dev_err(&easrc->pdev->dev, "ratio exceed range\n");
+		return -EINVAL;
+	}
+
+	regmap_write(easrc->regmap, REG_EASRC_RRL(ctx->index),
+		     EASRC_RRL_RS_RL(r[0]));
+	regmap_write(easrc->regmap, REG_EASRC_RRH(ctx->index),
+		     EASRC_RRH_RS_RH(r[1]));
+
+	return 0;
+}
+
+/* Normalize input and output sample rates */
+static void fsl_easrc_normalize_rates(struct fsl_asrc_pair *ctx)
+{
+	struct fsl_easrc_ctx_priv *ctx_priv;
+	int a, b;
+
+	if (!ctx)
+		return;
+
+	ctx_priv = ctx->private;
+
+	a = ctx_priv->in_params.sample_rate;
+	b = ctx_priv->out_params.sample_rate;
+
+	a = gcd(a, b);
+
+	/* Divide by gcd to normalize the rate */
+	ctx_priv->in_params.norm_rate = ctx_priv->in_params.sample_rate / a;
+	ctx_priv->out_params.norm_rate = ctx_priv->out_params.sample_rate / a;
+}
+
+/* Resets the pointer of the coeff memory pointers */
+static int fsl_easrc_coeff_mem_ptr_reset(struct fsl_asrc *easrc,
+					 unsigned int ctx_id, int mem_type)
+{
+	struct device *dev;
+	u32 reg, mask, val;
+
+	if (!easrc)
+		return -ENODEV;
+
+	dev = &easrc->pdev->dev;
+
+	switch (mem_type) {
+	case EASRC_PF_COEFF_MEM:
+		/* This resets the prefilter memory pointer addr */
+		if (ctx_id >= EASRC_CTX_MAX_NUM) {
+			dev_err(dev, "Invalid context id[%d]\n", ctx_id);
+			return -EINVAL;
+		}
+
+		reg = REG_EASRC_CCE1(ctx_id);
+		mask = EASRC_CCE1_COEF_MEM_RST_MASK;
+		val = EASRC_CCE1_COEF_MEM_RST;
+		break;
+	case EASRC_RS_COEFF_MEM:
+		/* This resets the resampling memory pointer addr */
+		reg = REG_EASRC_CRCC;
+		mask = EASRC_CRCC_RS_CPR_MASK;
+		val = EASRC_CRCC_RS_CPR;
+		break;
+	default:
+		dev_err(dev, "Unknown memory type\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * To reset the write pointer back to zero, the register field
+	 * ASRC_CTX_CTRL_EXT1x[PF_COEFF_MEM_RST] can be toggled from
+	 * 0x0 to 0x1 to 0x0.
+	 */
+	regmap_update_bits(easrc->regmap, reg, mask, 0);
+	regmap_update_bits(easrc->regmap, reg, mask, val);
+	regmap_update_bits(easrc->regmap, reg, mask, 0);
+
+	return 0;
+}
+
+static inline uint32_t bits_taps_to_val(unsigned int t)
+{
+	switch (t) {
+	case EASRC_RS_32_TAPS:
+		return 32;
+	case EASRC_RS_64_TAPS:
+		return 64;
+	case EASRC_RS_128_TAPS:
+		return 128;
+	}
+
+	return 0;
+}
+
+static int fsl_easrc_resampler_config(struct fsl_asrc *easrc)
+{
+	struct device *dev = &easrc->pdev->dev;
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	struct asrc_firmware_hdr *hdr =  easrc_priv->firmware_hdr;
+	struct interp_params *interp = easrc_priv->interp;
+	struct interp_params *selected_interp = NULL;
+	unsigned int num_coeff;
+	unsigned int i;
+	u64 *coef;
+	u32 *r;
+	int ret;
+
+	if (!hdr) {
+		dev_err(dev, "firmware not loaded!\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < hdr->interp_scen; i++) {
+		if ((interp[i].num_taps - 1) !=
+		    bits_taps_to_val(easrc_priv->rs_num_taps))
+			continue;
+
+		coef = interp[i].coeff;
+		selected_interp = &interp[i];
+		dev_dbg(dev, "Selected interp_filter: %u taps - %u phases\n",
+			selected_interp->num_taps,
+			selected_interp->num_phases);
+		break;
+	}
+
+	if (!selected_interp) {
+		dev_err(dev, "failed to get interpreter configuration\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * RS_LOW - first half of center tap of the sinc function
+	 * RS_HIGH - second half of center tap of the sinc function
+	 * This is due to the fact the resampling function must be
+	 * symetrical - i.e. odd number of taps
+	 */
+	r = (uint32_t *)&selected_interp->center_tap;
+	regmap_write(easrc->regmap, REG_EASRC_RCTCL, EASRC_RCTCL_RS_CL(r[0]));
+	regmap_write(easrc->regmap, REG_EASRC_RCTCH, EASRC_RCTCH_RS_CH(r[1]));
+
+	/*
+	 * Write Number of Resampling Coefficient Taps
+	 * 00b - 32-Tap Resampling Filter
+	 * 01b - 64-Tap Resampling Filter
+	 * 10b - 128-Tap Resampling Filter
+	 * 11b - N/A
+	 */
+	regmap_update_bits(easrc->regmap, REG_EASRC_CRCC,
+			   EASRC_CRCC_RS_TAPS_MASK,
+			   EASRC_CRCC_RS_TAPS(easrc_priv->rs_num_taps));
+
+	/* Reset prefilter coefficient pointer back to 0 */
+	ret = fsl_easrc_coeff_mem_ptr_reset(easrc, 0, EASRC_RS_COEFF_MEM);
+	if (ret)
+		return ret;
+
+	/*
+	 * When the filter is programmed to run in:
+	 * 32-tap mode, 16-taps, 128-phases 4-coefficients per phase
+	 * 64-tap mode, 32-taps, 64-phases 4-coefficients per phase
+	 * 128-tap mode, 64-taps, 32-phases 4-coefficients per phase
+	 * This means the number of writes is constant no matter
+	 * the mode we are using
+	 */
+	num_coeff = 16 * 128 * 4;
+
+	for (i = 0; i < num_coeff; i++) {
+		r = (uint32_t *)&coef[i];
+		regmap_write(easrc->regmap, REG_EASRC_CRCM,
+			     EASRC_CRCM_RS_CWD(r[0]));
+		regmap_write(easrc->regmap, REG_EASRC_CRCM,
+			     EASRC_CRCM_RS_CWD(r[1]));
+	}
+
+	return 0;
+}
+
+/**
+ *  Scale filter coefficients (64 bits float)
+ *  For input float32 normalized range (1.0,-1.0) -> output int[16,24,32]:
+ *      scale it by multiplying filter coefficients by 2^31
+ *  For input int[16, 24, 32] -> output float32
+ *      scale it by multiplying filter coefficients by 2^-15, 2^-23, 2^-31
+ *  input:
+ *      asrc:  Structure pointer of fsl_asrc
+ *      infilter : Pointer to non-scaled input filter
+ *      shift:  The multiply factor
+ *  output:
+ *      outfilter: scaled filter
+ */
+static int fsl_easrc_normalize_filter(struct fsl_asrc *easrc,
+				      u64 *infilter,
+				      u64 *outfilter,
+				      int shift)
+{
+	struct device *dev = &easrc->pdev->dev;
+	u64 coef = *infilter;
+	s64 exp  = (coef & 0x7ff0000000000000ll) >> 52;
+	u64 outcoef;
+
+	/*
+	 * If exponent is zero (value == 0), or 7ff (value == NaNs)
+	 * dont touch the content
+	 */
+	if (exp == 0 || exp == 0x7ff) {
+		*outfilter = coef;
+		return 0;
+	}
+
+	/* coef * 2^shift ==> exp + shift */
+	exp += shift;
+
+	if ((shift > 0 && exp >= 0x7ff) || (shift < 0 && exp <= 0)) {
+		dev_err(dev, "coef out of range\n");
+		return -EINVAL;
+	}
+
+	outcoef = (u64)(coef & 0x800FFFFFFFFFFFFFll) + ((u64)exp << 52);
+	*outfilter = outcoef;
+
+	return 0;
+}
+
+static int fsl_easrc_write_pf_coeff_mem(struct fsl_asrc *easrc, int ctx_id,
+					u64 *coef, int n_taps, int shift)
+{
+	struct device *dev = &easrc->pdev->dev;
+	int ret = 0;
+	int i;
+	u32 *r;
+	u64 tmp;
+
+	/* If STx_NUM_TAPS is set to 0x0 then return */
+	if (!n_taps)
+		return 0;
+
+	if (!coef) {
+		dev_err(dev, "coef table is NULL\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * When switching between stages, the address pointer
+	 * should be reset back to 0x0 before performing a write
+	 */
+	ret = fsl_easrc_coeff_mem_ptr_reset(easrc, ctx_id, EASRC_PF_COEFF_MEM);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < (n_taps + 1) / 2; i++) {
+		ret = fsl_easrc_normalize_filter(easrc, &coef[i], &tmp, shift);
+		if (ret)
+			return ret;
+
+		r = (uint32_t *)&tmp;
+		regmap_write(easrc->regmap, REG_EASRC_PCF(ctx_id),
+			     EASRC_PCF_CD(r[0]));
+		regmap_write(easrc->regmap, REG_EASRC_PCF(ctx_id),
+			     EASRC_PCF_CD(r[1]));
+	}
+
+	return 0;
+}
+
+static int fsl_easrc_prefilter_config(struct fsl_asrc *easrc,
+				      unsigned int ctx_id)
+{
+	struct prefil_params *prefil, *selected_prefil = NULL;
+	struct fsl_easrc_ctx_priv *ctx_priv;
+	struct fsl_easrc_priv *easrc_priv;
+	struct asrc_firmware_hdr *hdr;
+	struct fsl_asrc_pair *ctx;
+	struct device *dev;
+	u32 inrate, outrate, offset = 0;
+	u32 in_s_rate, out_s_rate, in_s_fmt, out_s_fmt;
+	int ret, i;
+
+	if (!easrc)
+		return -ENODEV;
+
+	dev = &easrc->pdev->dev;
+
+	if (ctx_id >= EASRC_CTX_MAX_NUM) {
+		dev_err(dev, "Invalid context id[%d]\n", ctx_id);
+		return -EINVAL;
+	}
+
+	easrc_priv = easrc->private;
+
+	ctx = easrc->pair[ctx_id];
+	ctx_priv = ctx->private;
+
+	in_s_rate = ctx_priv->in_params.sample_rate;
+	out_s_rate = ctx_priv->out_params.sample_rate;
+	in_s_fmt = ctx_priv->in_params.sample_format;
+	out_s_fmt = ctx_priv->out_params.sample_format;
+
+	ctx_priv->in_filled_sample = bits_taps_to_val(easrc_priv->rs_num_taps) / 2;
+	ctx_priv->out_missed_sample = ctx_priv->in_filled_sample * out_s_rate / in_s_rate;
+
+	ctx_priv->st1_num_taps = 0;
+	ctx_priv->st2_num_taps = 0;
+
+	regmap_write(easrc->regmap, REG_EASRC_CCE1(ctx_id), 0);
+	regmap_write(easrc->regmap, REG_EASRC_CCE2(ctx_id), 0);
+
+	/*
+	 * The audio float point data range is (-1, 1), the asrc would output
+	 * all zero for float point input and integer output case, that is to
+	 * drop the fractional part of the data directly.
+	 *
+	 * In order to support float to int conversion or int to float
+	 * conversion we need to do special operation on the coefficient to
+	 * enlarge/reduce the data to the expected range.
+	 *
+	 * For float to int case:
+	 * Up sampling:
+	 * 1. Create a 1 tap filter with center tap (only tap) of 2^31
+	 *    in 64 bits floating point.
+	 *    double value = (double)(((uint64_t)1) << 31)
+	 * 2. Program 1 tap prefilter with center tap above.
+	 *
+	 * Down sampling,
+	 * 1. If the filter is single stage filter, add "shift" to the exponent
+	 *    of stage 1 coefficients.
+	 * 2. If the filter is two stage filter , add "shift" to the exponent
+	 *    of stage 2 coefficients.
+	 *
+	 * The "shift" is 31, same for int16, int24, int32 case.
+	 *
+	 * For int to float case:
+	 * Up sampling:
+	 * 1. Create a 1 tap filter with center tap (only tap) of 2^-31
+	 *    in 64 bits floating point.
+	 * 2. Program 1 tap prefilter with center tap above.
+	 *
+	 * Down sampling,
+	 * 1. If the filter is single stage filter, subtract "shift" to the
+	 *    exponent of stage 1 coefficients.
+	 * 2. If the filter is two stage filter , subtract "shift" to the
+	 *    exponent of stage 2 coefficients.
+	 *
+	 * The "shift" is 15,23,31, different for int16, int24, int32 case.
+	 *
+	 */
+	if (out_s_rate >= in_s_rate) {
+		if (out_s_rate == in_s_rate)
+			regmap_update_bits(easrc->regmap,
+					   REG_EASRC_CCE1(ctx_id),
+					   EASRC_CCE1_RS_BYPASS_MASK,
+					   EASRC_CCE1_RS_BYPASS);
+
+		ctx_priv->st1_num_taps = 1;
+		ctx_priv->st1_coeff    = &easrc_priv->const_coeff;
+		ctx_priv->st1_num_exp  = 1;
+		ctx_priv->st2_num_taps = 0;
+
+		if (in_s_fmt == SNDRV_PCM_FORMAT_FLOAT_LE &&
+		    out_s_fmt != SNDRV_PCM_FORMAT_FLOAT_LE)
+			ctx_priv->st1_addexp = 31;
+		else if (in_s_fmt != SNDRV_PCM_FORMAT_FLOAT_LE &&
+			 out_s_fmt == SNDRV_PCM_FORMAT_FLOAT_LE)
+			ctx_priv->st1_addexp -= ctx_priv->in_params.fmt.addexp;
+	} else {
+		inrate = ctx_priv->in_params.norm_rate;
+		outrate = ctx_priv->out_params.norm_rate;
+
+		hdr = easrc_priv->firmware_hdr;
+		prefil = easrc_priv->prefil;
+
+		for (i = 0; i < hdr->prefil_scen; i++) {
+			if (inrate == prefil[i].insr &&
+			    outrate == prefil[i].outsr) {
+				selected_prefil = &prefil[i];
+				dev_dbg(dev, "Selected prefilter: %u insr, %u outsr, %u st1_taps, %u st2_taps\n",
+					selected_prefil->insr,
+					selected_prefil->outsr,
+					selected_prefil->st1_taps,
+					selected_prefil->st2_taps);
+				break;
+			}
+		}
+
+		if (!selected_prefil) {
+			dev_err(dev, "Conversion from in ratio %u(%u) to out ratio %u(%u) is not supported\n",
+				in_s_rate, inrate,
+				out_s_rate, outrate);
+			return -EINVAL;
+		}
+
+		/*
+		 * In prefilter coeff array, first st1_num_taps represent the
+		 * stage1 prefilter coefficients followed by next st2_num_taps
+		 * representing stage 2 coefficients
+		 */
+		ctx_priv->st1_num_taps = selected_prefil->st1_taps;
+		ctx_priv->st1_coeff    = selected_prefil->coeff;
+		ctx_priv->st1_num_exp  = selected_prefil->st1_exp;
+
+		offset = ((selected_prefil->st1_taps + 1) / 2);
+		ctx_priv->st2_num_taps = selected_prefil->st2_taps;
+		ctx_priv->st2_coeff    = selected_prefil->coeff + offset;
+
+		if (in_s_fmt == SNDRV_PCM_FORMAT_FLOAT_LE &&
+		    out_s_fmt != SNDRV_PCM_FORMAT_FLOAT_LE) {
+			/* only change stage2 coefficient for 2 stage case */
+			if (ctx_priv->st2_num_taps > 0)
+				ctx_priv->st2_addexp = 31;
+			else
+				ctx_priv->st1_addexp = 31;
+		} else if (in_s_fmt != SNDRV_PCM_FORMAT_FLOAT_LE &&
+			   out_s_fmt == SNDRV_PCM_FORMAT_FLOAT_LE) {
+			if (ctx_priv->st2_num_taps > 0)
+				ctx_priv->st2_addexp -= ctx_priv->in_params.fmt.addexp;
+			else
+				ctx_priv->st1_addexp -= ctx_priv->in_params.fmt.addexp;
+		}
+	}
+
+	ctx_priv->in_filled_sample += (ctx_priv->st1_num_taps / 2) * ctx_priv->st1_num_exp +
+				  ctx_priv->st2_num_taps / 2;
+	ctx_priv->out_missed_sample = ctx_priv->in_filled_sample * out_s_rate / in_s_rate;
+
+	if (ctx_priv->in_filled_sample * out_s_rate % in_s_rate != 0)
+		ctx_priv->out_missed_sample += 1;
+	/*
+	 * To modify the value of a prefilter coefficient, the user must
+	 * perform a write to the register ASRC_PRE_COEFF_FIFOn[COEFF_DATA]
+	 * while the respective context RUN_EN bit is set to 0b0
+	 */
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx_id),
+			   EASRC_CC_EN_MASK, 0);
+
+	if (ctx_priv->st1_num_taps > EASRC_MAX_PF_TAPS) {
+		dev_err(dev, "ST1 taps [%d] mus be lower than %d\n",
+			ctx_priv->st1_num_taps, EASRC_MAX_PF_TAPS);
+		ret = -EINVAL;
+		goto ctx_error;
+	}
+
+	/* Update ctx ST1_NUM_TAPS in Context Control Extended 2 register */
+	regmap_update_bits(easrc->regmap, REG_EASRC_CCE2(ctx_id),
+			   EASRC_CCE2_ST1_TAPS_MASK,
+			   EASRC_CCE2_ST1_TAPS(ctx_priv->st1_num_taps - 1));
+
+	/* Prefilter Coefficient Write Select to write in ST1 coeff */
+	regmap_update_bits(easrc->regmap, REG_EASRC_CCE1(ctx_id),
+			   EASRC_CCE1_COEF_WS_MASK,
+			   EASRC_PF_ST1_COEFF_WR << EASRC_CCE1_COEF_WS_SHIFT);
+
+	ret = fsl_easrc_write_pf_coeff_mem(easrc, ctx_id,
+					   ctx_priv->st1_coeff,
+					   ctx_priv->st1_num_taps,
+					   ctx_priv->st1_addexp);
+	if (ret)
+		goto ctx_error;
+
+	if (ctx_priv->st2_num_taps > 0) {
+		if (ctx_priv->st2_num_taps + ctx_priv->st1_num_taps > EASRC_MAX_PF_TAPS) {
+			dev_err(dev, "ST2 taps [%d] mus be lower than %d\n",
+				ctx_priv->st2_num_taps, EASRC_MAX_PF_TAPS);
+			ret = -EINVAL;
+			goto ctx_error;
+		}
+
+		regmap_update_bits(easrc->regmap, REG_EASRC_CCE1(ctx_id),
+				   EASRC_CCE1_PF_TSEN_MASK,
+				   EASRC_CCE1_PF_TSEN);
+		/*
+		 * Enable prefilter stage1 writeback floating point
+		 * which is used for FLOAT_LE case
+		 */
+		regmap_update_bits(easrc->regmap, REG_EASRC_CCE1(ctx_id),
+				   EASRC_CCE1_PF_ST1_WBFP_MASK,
+				   EASRC_CCE1_PF_ST1_WBFP);
+
+		regmap_update_bits(easrc->regmap, REG_EASRC_CCE1(ctx_id),
+				   EASRC_CCE1_PF_EXP_MASK,
+				   EASRC_CCE1_PF_EXP(ctx_priv->st1_num_exp - 1));
+
+		/* Update ctx ST2_NUM_TAPS in Context Control Extended 2 reg */
+		regmap_update_bits(easrc->regmap, REG_EASRC_CCE2(ctx_id),
+				   EASRC_CCE2_ST2_TAPS_MASK,
+				   EASRC_CCE2_ST2_TAPS(ctx_priv->st2_num_taps - 1));
+
+		/* Prefilter Coefficient Write Select to write in ST2 coeff */
+		regmap_update_bits(easrc->regmap, REG_EASRC_CCE1(ctx_id),
+				   EASRC_CCE1_COEF_WS_MASK,
+				   EASRC_PF_ST2_COEFF_WR << EASRC_CCE1_COEF_WS_SHIFT);
+
+		ret = fsl_easrc_write_pf_coeff_mem(easrc, ctx_id,
+						   ctx_priv->st2_coeff,
+						   ctx_priv->st2_num_taps,
+						   ctx_priv->st2_addexp);
+		if (ret)
+			goto ctx_error;
+	}
+
+	return 0;
+
+ctx_error:
+	return ret;
+}
+
+static int fsl_easrc_max_ch_for_slot(struct fsl_asrc_pair *ctx,
+				     struct fsl_easrc_slot *slot)
+{
+	struct fsl_easrc_ctx_priv *ctx_priv = ctx->private;
+	int st1_mem_alloc = 0, st2_mem_alloc = 0;
+	int pf_mem_alloc = 0;
+	int max_channels = 8 - slot->num_channel;
+	int channels = 0;
+
+	if (ctx_priv->st1_num_taps > 0) {
+		if (ctx_priv->st2_num_taps > 0)
+			st1_mem_alloc =
+				(ctx_priv->st1_num_taps - 1) * ctx_priv->st1_num_exp + 1;
+		else
+			st1_mem_alloc = ctx_priv->st1_num_taps;
+	}
+
+	if (ctx_priv->st2_num_taps > 0)
+		st2_mem_alloc = ctx_priv->st2_num_taps;
+
+	pf_mem_alloc = st1_mem_alloc + st2_mem_alloc;
+
+	if (pf_mem_alloc != 0)
+		channels = (6144 - slot->pf_mem_used) / pf_mem_alloc;
+	else
+		channels = 8;
+
+	if (channels < max_channels)
+		max_channels = channels;
+
+	return max_channels;
+}
+
+static int fsl_easrc_config_one_slot(struct fsl_asrc_pair *ctx,
+				     struct fsl_easrc_slot *slot,
+				     unsigned int slot_ctx_idx,
+				     unsigned int *req_channels,
+				     unsigned int *start_channel,
+				     unsigned int *avail_channel)
+{
+	struct fsl_asrc *easrc = ctx->asrc;
+	struct fsl_easrc_ctx_priv *ctx_priv = ctx->private;
+	int st1_chanxexp, st1_mem_alloc = 0, st2_mem_alloc = 0;
+	unsigned int reg0, reg1, reg2, reg3;
+	unsigned int addr;
+
+	if (slot->slot_index == 0) {
+		reg0 = REG_EASRC_DPCS0R0(slot_ctx_idx);
+		reg1 = REG_EASRC_DPCS0R1(slot_ctx_idx);
+		reg2 = REG_EASRC_DPCS0R2(slot_ctx_idx);
+		reg3 = REG_EASRC_DPCS0R3(slot_ctx_idx);
+	} else {
+		reg0 = REG_EASRC_DPCS1R0(slot_ctx_idx);
+		reg1 = REG_EASRC_DPCS1R1(slot_ctx_idx);
+		reg2 = REG_EASRC_DPCS1R2(slot_ctx_idx);
+		reg3 = REG_EASRC_DPCS1R3(slot_ctx_idx);
+	}
+
+	if (*req_channels <= *avail_channel) {
+		slot->num_channel = *req_channels;
+		*req_channels = 0;
+	} else {
+		slot->num_channel = *avail_channel;
+		*req_channels -= *avail_channel;
+	}
+
+	slot->min_channel = *start_channel;
+	slot->max_channel = *start_channel + slot->num_channel - 1;
+	slot->ctx_index = ctx->index;
+	slot->busy = true;
+	*start_channel += slot->num_channel;
+
+	regmap_update_bits(easrc->regmap, reg0,
+			   EASRC_DPCS0R0_MAXCH_MASK,
+			   EASRC_DPCS0R0_MAXCH(slot->max_channel));
+
+	regmap_update_bits(easrc->regmap, reg0,
+			   EASRC_DPCS0R0_MINCH_MASK,
+			   EASRC_DPCS0R0_MINCH(slot->min_channel));
+
+	regmap_update_bits(easrc->regmap, reg0,
+			   EASRC_DPCS0R0_NUMCH_MASK,
+			   EASRC_DPCS0R0_NUMCH(slot->num_channel - 1));
+
+	regmap_update_bits(easrc->regmap, reg0,
+			   EASRC_DPCS0R0_CTXNUM_MASK,
+			   EASRC_DPCS0R0_CTXNUM(slot->ctx_index));
+
+	if (ctx_priv->st1_num_taps > 0) {
+		if (ctx_priv->st2_num_taps > 0)
+			st1_mem_alloc =
+				(ctx_priv->st1_num_taps - 1) * slot->num_channel *
+				ctx_priv->st1_num_exp + slot->num_channel;
+		else
+			st1_mem_alloc = ctx_priv->st1_num_taps * slot->num_channel;
+
+		slot->pf_mem_used = st1_mem_alloc;
+		regmap_update_bits(easrc->regmap, reg2,
+				   EASRC_DPCS0R2_ST1_MA_MASK,
+				   EASRC_DPCS0R2_ST1_MA(st1_mem_alloc));
+
+		if (slot->slot_index == 1)
+			addr = PREFILTER_MEM_LEN - st1_mem_alloc;
+		else
+			addr = 0;
+
+		regmap_update_bits(easrc->regmap, reg2,
+				   EASRC_DPCS0R2_ST1_SA_MASK,
+				   EASRC_DPCS0R2_ST1_SA(addr));
+	}
+
+	if (ctx_priv->st2_num_taps > 0) {
+		st1_chanxexp = slot->num_channel * (ctx_priv->st1_num_exp - 1);
+
+		regmap_update_bits(easrc->regmap, reg1,
+				   EASRC_DPCS0R1_ST1_EXP_MASK,
+				   EASRC_DPCS0R1_ST1_EXP(st1_chanxexp));
+
+		st2_mem_alloc = slot->num_channel * ctx_priv->st2_num_taps;
+		slot->pf_mem_used += st2_mem_alloc;
+		regmap_update_bits(easrc->regmap, reg3,
+				   EASRC_DPCS0R3_ST2_MA_MASK,
+				   EASRC_DPCS0R3_ST2_MA(st2_mem_alloc));
+
+		if (slot->slot_index == 1)
+			addr = PREFILTER_MEM_LEN - st1_mem_alloc - st2_mem_alloc;
+		else
+			addr = st1_mem_alloc;
+
+		regmap_update_bits(easrc->regmap, reg3,
+				   EASRC_DPCS0R3_ST2_SA_MASK,
+				   EASRC_DPCS0R3_ST2_SA(addr));
+	}
+
+	regmap_update_bits(easrc->regmap, reg0,
+			   EASRC_DPCS0R0_EN_MASK, EASRC_DPCS0R0_EN);
+
+	return 0;
+}
+
+/*
+ * fsl_easrc_config_slot
+ *
+ * A single context can be split amongst any of the 4 context processing pipes
+ * in the design.
+ * The total number of channels consumed within the context processor must be
+ * less than or equal to 8. if a single context is configured to contain more
+ * than 8 channels then it must be distributed across multiple context
+ * processing pipe slots.
+ *
+ */
+static int fsl_easrc_config_slot(struct fsl_asrc *easrc, unsigned int ctx_id)
+{
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	struct fsl_asrc_pair *ctx = easrc->pair[ctx_id];
+	int req_channels = ctx->channels;
+	int start_channel = 0, avail_channel;
+	struct fsl_easrc_slot *slot0, *slot1;
+	struct fsl_easrc_slot *slota, *slotb;
+	int i, ret;
+
+	if (req_channels <= 0)
+		return -EINVAL;
+
+	for (i = 0; i < EASRC_CTX_MAX_NUM; i++) {
+		slot0 = &easrc_priv->slot[i][0];
+		slot1 = &easrc_priv->slot[i][1];
+
+		if (slot0->busy && slot1->busy) {
+			continue;
+		} else if ((slot0->busy && slot0->ctx_index == ctx->index) ||
+			 (slot1->busy && slot1->ctx_index == ctx->index)) {
+			continue;
+		} else if (!slot0->busy) {
+			slota = slot0;
+			slotb = slot1;
+			slota->slot_index = 0;
+		} else if (!slot1->busy) {
+			slota = slot1;
+			slotb = slot0;
+			slota->slot_index = 1;
+		}
+
+		if (!slota || !slotb)
+			continue;
+
+		avail_channel = fsl_easrc_max_ch_for_slot(ctx, slotb);
+		if (avail_channel <= 0)
+			continue;
+
+		ret = fsl_easrc_config_one_slot(ctx, slota, i, &req_channels,
+						&start_channel, &avail_channel);
+		if (ret)
+			return ret;
+
+		if (req_channels > 0)
+			continue;
+		else
+			break;
+	}
+
+	if (req_channels > 0) {
+		dev_err(&easrc->pdev->dev, "no avail slot.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * fsl_easrc_release_slot
+ *
+ * Clear the slot configuration
+ */
+static int fsl_easrc_release_slot(struct fsl_asrc *easrc, unsigned int ctx_id)
+{
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	struct fsl_asrc_pair *ctx = easrc->pair[ctx_id];
+	int i;
+
+	for (i = 0; i < EASRC_CTX_MAX_NUM; i++) {
+		if (easrc_priv->slot[i][0].busy &&
+		    easrc_priv->slot[i][0].ctx_index == ctx->index) {
+			easrc_priv->slot[i][0].busy = false;
+			easrc_priv->slot[i][0].num_channel = 0;
+			easrc_priv->slot[i][0].pf_mem_used = 0;
+			/* set registers */
+			regmap_write(easrc->regmap, REG_EASRC_DPCS0R0(i), 0);
+			regmap_write(easrc->regmap, REG_EASRC_DPCS0R1(i), 0);
+			regmap_write(easrc->regmap, REG_EASRC_DPCS0R2(i), 0);
+			regmap_write(easrc->regmap, REG_EASRC_DPCS0R3(i), 0);
+		}
+
+		if (easrc_priv->slot[i][1].busy &&
+		    easrc_priv->slot[i][1].ctx_index == ctx->index) {
+			easrc_priv->slot[i][1].busy = false;
+			easrc_priv->slot[i][1].num_channel = 0;
+			easrc_priv->slot[i][1].pf_mem_used = 0;
+			/* set registers */
+			regmap_write(easrc->regmap, REG_EASRC_DPCS1R0(i), 0);
+			regmap_write(easrc->regmap, REG_EASRC_DPCS1R1(i), 0);
+			regmap_write(easrc->regmap, REG_EASRC_DPCS1R2(i), 0);
+			regmap_write(easrc->regmap, REG_EASRC_DPCS1R3(i), 0);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * fsl_easrc_config_context
+ *
+ * Configure the register relate with context.
+ */
+int fsl_easrc_config_context(struct fsl_asrc *easrc, unsigned int ctx_id)
+{
+	struct fsl_easrc_ctx_priv *ctx_priv;
+	struct fsl_asrc_pair *ctx;
+	struct device *dev;
+	unsigned long lock_flags;
+	int ret;
+
+	if (!easrc)
+		return -ENODEV;
+
+	dev = &easrc->pdev->dev;
+
+	if (ctx_id >= EASRC_CTX_MAX_NUM) {
+		dev_err(dev, "Invalid context id[%d]\n", ctx_id);
+		return -EINVAL;
+	}
+
+	ctx = easrc->pair[ctx_id];
+
+	ctx_priv = ctx->private;
+
+	fsl_easrc_normalize_rates(ctx);
+
+	ret = fsl_easrc_set_rs_ratio(ctx);
+	if (ret)
+		return ret;
+
+	/* Initialize the context coeficients */
+	ret = fsl_easrc_prefilter_config(easrc, ctx->index);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&easrc->lock, lock_flags);
+	ret = fsl_easrc_config_slot(easrc, ctx->index);
+	spin_unlock_irqrestore(&easrc->lock, lock_flags);
+	if (ret)
+		return ret;
+
+	/*
+	 * Both prefilter and resampling filters can use following
+	 * initialization modes:
+	 * 2 - zero-fil mode
+	 * 1 - replication mode
+	 * 0 - software control
+	 */
+	regmap_update_bits(easrc->regmap, REG_EASRC_CCE1(ctx_id),
+			   EASRC_CCE1_RS_INIT_MASK,
+			   EASRC_CCE1_RS_INIT(ctx_priv->rs_init_mode));
+
+	regmap_update_bits(easrc->regmap, REG_EASRC_CCE1(ctx_id),
+			   EASRC_CCE1_PF_INIT_MASK,
+			   EASRC_CCE1_PF_INIT(ctx_priv->pf_init_mode));
+
+	/*
+	 * Context Input FIFO Watermark
+	 * DMA request is generated when input FIFO < FIFO_WTMK
+	 */
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx_id),
+			   EASRC_CC_FIFO_WTMK_MASK,
+			   EASRC_CC_FIFO_WTMK(ctx_priv->in_params.fifo_wtmk));
+
+	/*
+	 * Context Output FIFO Watermark
+	 * DMA request is generated when output FIFO > FIFO_WTMK
+	 * So we set fifo_wtmk -1 to register.
+	 */
+	regmap_update_bits(easrc->regmap, REG_EASRC_COC(ctx_id),
+			   EASRC_COC_FIFO_WTMK_MASK,
+			   EASRC_COC_FIFO_WTMK(ctx_priv->out_params.fifo_wtmk - 1));
+
+	/* Number of channels */
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx_id),
+			   EASRC_CC_CHEN_MASK,
+			   EASRC_CC_CHEN(ctx->channels - 1));
+	return 0;
+}
+
+static int fsl_easrc_process_format(struct fsl_asrc_pair *ctx,
+				    struct fsl_easrc_data_fmt *fmt,
+				    snd_pcm_format_t raw_fmt)
+{
+	struct fsl_asrc *easrc = ctx->asrc;
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	int ret;
+
+	if (!fmt)
+		return -EINVAL;
+
+	/*
+	 * Context Input Floating Point Format
+	 * 0 - Integer Format
+	 * 1 - Single Precision FP Format
+	 */
+	fmt->floating_point = !snd_pcm_format_linear(raw_fmt);
+	fmt->sample_pos = 0;
+	fmt->iec958 = 0;
+
+	/* Get the data width */
+	switch (snd_pcm_format_width(raw_fmt)) {
+	case 16:
+		fmt->width = EASRC_WIDTH_16_BIT;
+		fmt->addexp = 15;
+		break;
+	case 20:
+		fmt->width = EASRC_WIDTH_20_BIT;
+		fmt->addexp = 19;
+		break;
+	case 24:
+		fmt->width = EASRC_WIDTH_24_BIT;
+		fmt->addexp = 23;
+		break;
+	case 32:
+		fmt->width = EASRC_WIDTH_32_BIT;
+		fmt->addexp = 31;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (raw_fmt) {
+	case SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE:
+		fmt->width = easrc_priv->bps_iec958[ctx->index];
+		fmt->iec958 = 1;
+		fmt->floating_point = 0;
+		if (fmt->width == EASRC_WIDTH_16_BIT) {
+			fmt->sample_pos = 12;
+			fmt->addexp = 15;
+		} else if (fmt->width == EASRC_WIDTH_20_BIT) {
+			fmt->sample_pos = 8;
+			fmt->addexp = 19;
+		} else if (fmt->width == EASRC_WIDTH_24_BIT) {
+			fmt->sample_pos = 4;
+			fmt->addexp = 23;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * Data Endianness
+	 * 0 - Little-Endian
+	 * 1 - Big-Endian
+	 */
+	ret = snd_pcm_format_big_endian(raw_fmt);
+	if (ret < 0)
+		return ret;
+
+	fmt->endianness = ret;
+
+	/*
+	 * Input Data sign
+	 * 0b - Signed Format
+	 * 1b - Unsigned Format
+	 */
+	fmt->unsign = snd_pcm_format_unsigned(raw_fmt) > 0 ? 1 : 0;
+
+	return 0;
+}
+
+int fsl_easrc_set_ctx_format(struct fsl_asrc_pair *ctx,
+			     snd_pcm_format_t *in_raw_format,
+			     snd_pcm_format_t *out_raw_format)
+{
+	struct fsl_asrc *easrc = ctx->asrc;
+	struct fsl_easrc_ctx_priv *ctx_priv = ctx->private;
+	struct fsl_easrc_data_fmt *in_fmt = &ctx_priv->in_params.fmt;
+	struct fsl_easrc_data_fmt *out_fmt = &ctx_priv->out_params.fmt;
+	int ret;
+
+	/* Get the bitfield values for input data format */
+	if (in_raw_format && out_raw_format) {
+		ret = fsl_easrc_process_format(ctx, in_fmt, *in_raw_format);
+		if (ret)
+			return ret;
+	}
+
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx->index),
+			   EASRC_CC_BPS_MASK,
+			   EASRC_CC_BPS(in_fmt->width));
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx->index),
+			   EASRC_CC_ENDIANNESS_MASK,
+			   in_fmt->endianness << EASRC_CC_ENDIANNESS_SHIFT);
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx->index),
+			   EASRC_CC_FMT_MASK,
+			   in_fmt->floating_point << EASRC_CC_FMT_SHIFT);
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx->index),
+			   EASRC_CC_INSIGN_MASK,
+			   in_fmt->unsign << EASRC_CC_INSIGN_SHIFT);
+
+	/* In Sample Position */
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx->index),
+			   EASRC_CC_SAMPLE_POS_MASK,
+			   EASRC_CC_SAMPLE_POS(in_fmt->sample_pos));
+
+	/* Get the bitfield values for input data format */
+	if (in_raw_format && out_raw_format) {
+		ret = fsl_easrc_process_format(ctx, out_fmt, *out_raw_format);
+		if (ret)
+			return ret;
+	}
+
+	regmap_update_bits(easrc->regmap, REG_EASRC_COC(ctx->index),
+			   EASRC_COC_BPS_MASK,
+			   EASRC_COC_BPS(out_fmt->width));
+	regmap_update_bits(easrc->regmap, REG_EASRC_COC(ctx->index),
+			   EASRC_COC_ENDIANNESS_MASK,
+			   out_fmt->endianness << EASRC_COC_ENDIANNESS_SHIFT);
+	regmap_update_bits(easrc->regmap, REG_EASRC_COC(ctx->index),
+			   EASRC_COC_FMT_MASK,
+			   out_fmt->floating_point << EASRC_COC_FMT_SHIFT);
+	regmap_update_bits(easrc->regmap, REG_EASRC_COC(ctx->index),
+			   EASRC_COC_OUTSIGN_MASK,
+			   out_fmt->unsign << EASRC_COC_OUTSIGN_SHIFT);
+
+	/* Out Sample Position */
+	regmap_update_bits(easrc->regmap, REG_EASRC_COC(ctx->index),
+			   EASRC_COC_SAMPLE_POS_MASK,
+			   EASRC_COC_SAMPLE_POS(out_fmt->sample_pos));
+
+	regmap_update_bits(easrc->regmap, REG_EASRC_COC(ctx->index),
+			   EASRC_COC_IEC_EN_MASK,
+			   out_fmt->iec958 << EASRC_COC_IEC_EN_SHIFT);
+
+	return ret;
+}
+
+/*
+ * The ASRC provides interleaving support in hardware to ensure that a
+ * variety of sample sources can be internally combined
+ * to conform with this format. Interleaving parameters are accessed
+ * through the ASRC_CTRL_IN_ACCESSa and ASRC_CTRL_OUT_ACCESSa registers
+ */
+int fsl_easrc_set_ctx_organziation(struct fsl_asrc_pair *ctx)
+{
+	struct fsl_easrc_ctx_priv *ctx_priv;
+	struct device *dev;
+	struct fsl_asrc *easrc;
+
+	if (!ctx)
+		return -ENODEV;
+
+	easrc = ctx->asrc;
+	ctx_priv = ctx->private;
+	dev = &easrc->pdev->dev;
+
+	/* input interleaving parameters */
+	regmap_update_bits(easrc->regmap, REG_EASRC_CIA(ctx->index),
+			   EASRC_CIA_ITER_MASK,
+			   EASRC_CIA_ITER(ctx_priv->in_params.iterations));
+	regmap_update_bits(easrc->regmap, REG_EASRC_CIA(ctx->index),
+			   EASRC_CIA_GRLEN_MASK,
+			   EASRC_CIA_GRLEN(ctx_priv->in_params.group_len));
+	regmap_update_bits(easrc->regmap, REG_EASRC_CIA(ctx->index),
+			   EASRC_CIA_ACCLEN_MASK,
+			   EASRC_CIA_ACCLEN(ctx_priv->in_params.access_len));
+
+	/* output interleaving parameters */
+	regmap_update_bits(easrc->regmap, REG_EASRC_COA(ctx->index),
+			   EASRC_COA_ITER_MASK,
+			   EASRC_COA_ITER(ctx_priv->out_params.iterations));
+	regmap_update_bits(easrc->regmap, REG_EASRC_COA(ctx->index),
+			   EASRC_COA_GRLEN_MASK,
+			   EASRC_COA_GRLEN(ctx_priv->out_params.group_len));
+	regmap_update_bits(easrc->regmap, REG_EASRC_COA(ctx->index),
+			   EASRC_COA_ACCLEN_MASK,
+			   EASRC_COA_ACCLEN(ctx_priv->out_params.access_len));
+
+	return 0;
+}
+
+/*
+ * Request one of the available contexts
+ *
+ * Returns a negative number on error and >=0 as context id
+ * on success
+ */
+int fsl_easrc_request_context(int channels, struct fsl_asrc_pair *ctx)
+{
+	enum asrc_pair_index index = ASRC_INVALID_PAIR;
+	struct fsl_asrc *easrc = ctx->asrc;
+	struct device *dev;
+	unsigned long lock_flags;
+	int ret = 0;
+	int i;
+
+	dev = &easrc->pdev->dev;
+
+	spin_lock_irqsave(&easrc->lock, lock_flags);
+
+	for (i = ASRC_PAIR_A; i < EASRC_CTX_MAX_NUM; i++) {
+		if (easrc->pair[i])
+			continue;
+
+		index = i;
+		break;
+	}
+
+	if (index == ASRC_INVALID_PAIR) {
+		dev_err(dev, "all contexts are busy\n");
+		ret = -EBUSY;
+	} else if (channels > easrc->channel_avail) {
+		dev_err(dev, "can't give the required channels: %d\n",
+			channels);
+		ret = -EINVAL;
+	} else {
+		ctx->index = index;
+		ctx->channels = channels;
+		easrc->pair[index] = ctx;
+		easrc->channel_avail -= channels;
+	}
+
+	spin_unlock_irqrestore(&easrc->lock, lock_flags);
+
+	return ret;
+}
+
+/*
+ * Release the context
+ *
+ * This funciton is mainly doing the revert thing in request context
+ */
+void fsl_easrc_release_context(struct fsl_asrc_pair *ctx)
+{
+	unsigned long lock_flags;
+	struct fsl_asrc *easrc;
+	struct device *dev;
+
+	if (!ctx)
+		return;
+
+	easrc = ctx->asrc;
+	dev = &easrc->pdev->dev;
+
+	spin_lock_irqsave(&easrc->lock, lock_flags);
+
+	fsl_easrc_release_slot(easrc, ctx->index);
+
+	easrc->channel_avail += ctx->channels;
+	easrc->pair[ctx->index] = NULL;
+
+	spin_unlock_irqrestore(&easrc->lock, lock_flags);
+}
+
+/*
+ * Start the context
+ *
+ * Enable the DMA request and context
+ */
+int fsl_easrc_start_context(struct fsl_asrc_pair *ctx)
+{
+	struct fsl_asrc *easrc = ctx->asrc;
+
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx->index),
+			   EASRC_CC_FWMDE_MASK, EASRC_CC_FWMDE);
+	regmap_update_bits(easrc->regmap, REG_EASRC_COC(ctx->index),
+			   EASRC_COC_FWMDE_MASK, EASRC_COC_FWMDE);
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx->index),
+			   EASRC_CC_EN_MASK, EASRC_CC_EN);
+	return 0;
+}
+
+/*
+ * Stop the context
+ *
+ * Disable the DMA request and context
+ */
+int fsl_easrc_stop_context(struct fsl_asrc_pair *ctx)
+{
+	struct fsl_asrc *easrc = ctx->asrc;
+	int val, i;
+	int size = 0;
+	int retry = 200;
+
+	regmap_read(easrc->regmap, REG_EASRC_CC(ctx->index), &val);
+
+	if (val & EASRC_CC_EN_MASK) {
+		regmap_update_bits(easrc->regmap,
+				   REG_EASRC_CC(ctx->index),
+				   EASRC_CC_STOP_MASK, EASRC_CC_STOP);
+		do {
+			regmap_read(easrc->regmap, REG_EASRC_SFS(ctx->index), &val);
+			val &= EASRC_SFS_NSGO_MASK;
+			size = val >> EASRC_SFS_NSGO_SHIFT;
+
+			/* Read FIFO, drop the data */
+			for (i = 0; i < size * ctx->channels; i++)
+				regmap_read(easrc->regmap, REG_EASRC_RDFIFO(ctx->index), &val);
+			/* Check RUN_STOP_DONE */
+			regmap_read(easrc->regmap, REG_EASRC_IRQF, &val);
+			if (val & EASRC_IRQF_RSD(1 << ctx->index)) {
+				/*Clear RUN_STOP_DONE*/
+				regmap_write_bits(easrc->regmap,
+						  REG_EASRC_IRQF,
+						  EASRC_IRQF_RSD(1 << ctx->index),
+						  EASRC_IRQF_RSD(1 << ctx->index));
+				break;
+			}
+			udelay(100);
+		} while (--retry);
+
+		if (retry == 0)
+			dev_warn(&easrc->pdev->dev, "RUN STOP fail\n");
+	}
+
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx->index),
+			   EASRC_CC_EN_MASK | EASRC_CC_STOP_MASK, 0);
+	regmap_update_bits(easrc->regmap, REG_EASRC_CC(ctx->index),
+			   EASRC_CC_FWMDE_MASK, 0);
+	regmap_update_bits(easrc->regmap, REG_EASRC_COC(ctx->index),
+			   EASRC_COC_FWMDE_MASK, 0);
+	return 0;
+}
+
+struct dma_chan *fsl_easrc_get_dma_channel(struct fsl_asrc_pair *ctx,
+					   bool dir)
+{
+	struct fsl_asrc *easrc = ctx->asrc;
+	enum asrc_pair_index index = ctx->index;
+	char name[8];
+
+	/* Example of dma name: ctx0_rx */
+	sprintf(name, "ctx%c_%cx", index + '0', dir == IN ? 'r' : 't');
+
+	return dma_request_slave_channel(&easrc->pdev->dev, name);
+};
+EXPORT_SYMBOL_GPL(fsl_easrc_get_dma_channel);
+
+static const unsigned int easrc_rates[] = {
+	8000, 11025, 12000, 16000,
+	22050, 24000, 32000, 44100,
+	48000, 64000, 88200, 96000,
+	128000, 176400, 192000, 256000,
+	352800, 384000, 705600, 768000,
+};
+
+static const struct snd_pcm_hw_constraint_list easrc_rate_constraints = {
+	.count = ARRAY_SIZE(easrc_rates),
+	.list = easrc_rates,
+};
+
+static int fsl_easrc_startup(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai)
+{
+	return snd_pcm_hw_constraint_list(substream->runtime, 0,
+					  SNDRV_PCM_HW_PARAM_RATE,
+					  &easrc_rate_constraints);
+}
+
+static int fsl_easrc_trigger(struct snd_pcm_substream *substream,
+			     int cmd, struct snd_soc_dai *dai)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct fsl_asrc_pair *ctx = runtime->private_data;
+	int ret;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ret = fsl_easrc_start_context(ctx);
+		if (ret)
+			return ret;
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		ret = fsl_easrc_stop_context(ctx);
+		if (ret)
+			return ret;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int fsl_easrc_hw_params(struct snd_pcm_substream *substream,
+			       struct snd_pcm_hw_params *params,
+			       struct snd_soc_dai *dai)
+{
+	struct fsl_asrc *easrc = snd_soc_dai_get_drvdata(dai);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct device *dev = &easrc->pdev->dev;
+	struct fsl_asrc_pair *ctx = runtime->private_data;
+	struct fsl_easrc_ctx_priv *ctx_priv = ctx->private;
+	unsigned int channels = params_channels(params);
+	unsigned int rate = params_rate(params);
+	snd_pcm_format_t format = params_format(params);
+	int ret;
+
+	ret = fsl_easrc_request_context(channels, ctx);
+	if (ret) {
+		dev_err(dev, "failed to request context\n");
+		return ret;
+	}
+
+	ctx_priv->ctx_streams |= BIT(substream->stream);
+
+	/*
+	 * Set the input and output ratio so we can compute
+	 * the resampling ratio in RS_LOW/HIGH
+	 */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		ctx_priv->in_params.sample_rate = rate;
+		ctx_priv->in_params.sample_format = format;
+		ctx_priv->out_params.sample_rate = easrc->asrc_rate;
+		ctx_priv->out_params.sample_format = easrc->asrc_format;
+	} else {
+		ctx_priv->out_params.sample_rate = rate;
+		ctx_priv->out_params.sample_format = format;
+		ctx_priv->in_params.sample_rate = easrc->asrc_rate;
+		ctx_priv->in_params.sample_format = easrc->asrc_format;
+	}
+
+	ctx->channels = channels;
+	ctx_priv->in_params.fifo_wtmk  = 0x20;
+	ctx_priv->out_params.fifo_wtmk = 0x20;
+
+	/*
+	 * Do only rate conversion and keep the same format for input
+	 * and output data
+	 */
+	ret = fsl_easrc_set_ctx_format(ctx,
+				       &ctx_priv->in_params.sample_format,
+				       &ctx_priv->out_params.sample_format);
+	if (ret) {
+		dev_err(dev, "failed to set format %d", ret);
+		return ret;
+	}
+
+	ret = fsl_easrc_config_context(easrc, ctx->index);
+	if (ret) {
+		dev_err(dev, "failed to config context\n");
+		return ret;
+	}
+
+	ctx_priv->in_params.iterations = 1;
+	ctx_priv->in_params.group_len = ctx->channels;
+	ctx_priv->in_params.access_len = ctx->channels;
+	ctx_priv->out_params.iterations = 1;
+	ctx_priv->out_params.group_len = ctx->channels;
+	ctx_priv->out_params.access_len = ctx->channels;
+
+	ret = fsl_easrc_set_ctx_organziation(ctx);
+	if (ret) {
+		dev_err(dev, "failed to set fifo organization\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int fsl_easrc_hw_free(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct fsl_asrc_pair *ctx = runtime->private_data;
+	struct fsl_easrc_ctx_priv *ctx_priv;
+
+	if (!ctx)
+		return -EINVAL;
+
+	ctx_priv = ctx->private;
+
+	if (ctx_priv->ctx_streams & BIT(substream->stream)) {
+		ctx_priv->ctx_streams &= ~BIT(substream->stream);
+		fsl_easrc_release_context(ctx);
+	}
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops fsl_easrc_dai_ops = {
+	.startup = fsl_easrc_startup,
+	.trigger = fsl_easrc_trigger,
+	.hw_params = fsl_easrc_hw_params,
+	.hw_free = fsl_easrc_hw_free,
+};
+
+static int fsl_easrc_dai_probe(struct snd_soc_dai *cpu_dai)
+{
+	struct fsl_asrc *easrc = dev_get_drvdata(cpu_dai->dev);
+
+	snd_soc_dai_init_dma_data(cpu_dai,
+				  &easrc->dma_params_tx,
+				  &easrc->dma_params_rx);
+	return 0;
+}
+
+static struct snd_soc_dai_driver fsl_easrc_dai = {
+	.probe = fsl_easrc_dai_probe,
+	.playback = {
+		.stream_name = "ASRC-Playback",
+		.channels_min = 1,
+		.channels_max = 32,
+		.rate_min = 8000,
+		.rate_max = 768000,
+		.rates = SNDRV_PCM_RATE_KNOT,
+		.formats = FSL_EASRC_FORMATS,
+	},
+	.capture = {
+		.stream_name = "ASRC-Capture",
+		.channels_min = 1,
+		.channels_max = 32,
+		.rate_min = 8000,
+		.rate_max = 768000,
+		.rates = SNDRV_PCM_RATE_KNOT,
+		.formats = FSL_EASRC_FORMATS |
+			   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+	},
+	.ops = &fsl_easrc_dai_ops,
+};
+
+static const struct snd_soc_component_driver fsl_easrc_component = {
+	.name		= "fsl-easrc-dai",
+	.controls       = fsl_easrc_snd_controls,
+	.num_controls   = ARRAY_SIZE(fsl_easrc_snd_controls),
+};
+
+static const struct reg_default fsl_easrc_reg_defaults[] = {
+	{REG_EASRC_WRFIFO(0),	0x00000000},
+	{REG_EASRC_WRFIFO(1),	0x00000000},
+	{REG_EASRC_WRFIFO(2),	0x00000000},
+	{REG_EASRC_WRFIFO(3),	0x00000000},
+	{REG_EASRC_RDFIFO(0),	0x00000000},
+	{REG_EASRC_RDFIFO(1),	0x00000000},
+	{REG_EASRC_RDFIFO(2),	0x00000000},
+	{REG_EASRC_RDFIFO(3),	0x00000000},
+	{REG_EASRC_CC(0),	0x00000000},
+	{REG_EASRC_CC(1),	0x00000000},
+	{REG_EASRC_CC(2),	0x00000000},
+	{REG_EASRC_CC(3),	0x00000000},
+	{REG_EASRC_CCE1(0),	0x00000000},
+	{REG_EASRC_CCE1(1),	0x00000000},
+	{REG_EASRC_CCE1(2),	0x00000000},
+	{REG_EASRC_CCE1(3),	0x00000000},
+	{REG_EASRC_CCE2(0),	0x00000000},
+	{REG_EASRC_CCE2(1),	0x00000000},
+	{REG_EASRC_CCE2(2),	0x00000000},
+	{REG_EASRC_CCE2(3),	0x00000000},
+	{REG_EASRC_CIA(0),	0x00000000},
+	{REG_EASRC_CIA(1),	0x00000000},
+	{REG_EASRC_CIA(2),	0x00000000},
+	{REG_EASRC_CIA(3),	0x00000000},
+	{REG_EASRC_DPCS0R0(0),	0x00000000},
+	{REG_EASRC_DPCS0R0(1),	0x00000000},
+	{REG_EASRC_DPCS0R0(2),	0x00000000},
+	{REG_EASRC_DPCS0R0(3),	0x00000000},
+	{REG_EASRC_DPCS0R1(0),	0x00000000},
+	{REG_EASRC_DPCS0R1(1),	0x00000000},
+	{REG_EASRC_DPCS0R1(2),	0x00000000},
+	{REG_EASRC_DPCS0R1(3),	0x00000000},
+	{REG_EASRC_DPCS0R2(0),	0x00000000},
+	{REG_EASRC_DPCS0R2(1),	0x00000000},
+	{REG_EASRC_DPCS0R2(2),	0x00000000},
+	{REG_EASRC_DPCS0R2(3),	0x00000000},
+	{REG_EASRC_DPCS0R3(0),	0x00000000},
+	{REG_EASRC_DPCS0R3(1),	0x00000000},
+	{REG_EASRC_DPCS0R3(2),	0x00000000},
+	{REG_EASRC_DPCS0R3(3),	0x00000000},
+	{REG_EASRC_DPCS1R0(0),	0x00000000},
+	{REG_EASRC_DPCS1R0(1),	0x00000000},
+	{REG_EASRC_DPCS1R0(2),	0x00000000},
+	{REG_EASRC_DPCS1R0(3),	0x00000000},
+	{REG_EASRC_DPCS1R1(0),	0x00000000},
+	{REG_EASRC_DPCS1R1(1),	0x00000000},
+	{REG_EASRC_DPCS1R1(2),	0x00000000},
+	{REG_EASRC_DPCS1R1(3),	0x00000000},
+	{REG_EASRC_DPCS1R2(0),	0x00000000},
+	{REG_EASRC_DPCS1R2(1),	0x00000000},
+	{REG_EASRC_DPCS1R2(2),	0x00000000},
+	{REG_EASRC_DPCS1R2(3),	0x00000000},
+	{REG_EASRC_DPCS1R3(0),	0x00000000},
+	{REG_EASRC_DPCS1R3(1),	0x00000000},
+	{REG_EASRC_DPCS1R3(2),	0x00000000},
+	{REG_EASRC_DPCS1R3(3),	0x00000000},
+	{REG_EASRC_COC(0),	0x00000000},
+	{REG_EASRC_COC(1),	0x00000000},
+	{REG_EASRC_COC(2),	0x00000000},
+	{REG_EASRC_COC(3),	0x00000000},
+	{REG_EASRC_COA(0),	0x00000000},
+	{REG_EASRC_COA(1),	0x00000000},
+	{REG_EASRC_COA(2),	0x00000000},
+	{REG_EASRC_COA(3),	0x00000000},
+	{REG_EASRC_SFS(0),	0x00000000},
+	{REG_EASRC_SFS(1),	0x00000000},
+	{REG_EASRC_SFS(2),	0x00000000},
+	{REG_EASRC_SFS(3),	0x00000000},
+	{REG_EASRC_RRL(0),	0x00000000},
+	{REG_EASRC_RRL(1),	0x00000000},
+	{REG_EASRC_RRL(2),	0x00000000},
+	{REG_EASRC_RRL(3),	0x00000000},
+	{REG_EASRC_RRH(0),	0x00000000},
+	{REG_EASRC_RRH(1),	0x00000000},
+	{REG_EASRC_RRH(2),	0x00000000},
+	{REG_EASRC_RRH(3),	0x00000000},
+	{REG_EASRC_RUC(0),	0x00000000},
+	{REG_EASRC_RUC(1),	0x00000000},
+	{REG_EASRC_RUC(2),	0x00000000},
+	{REG_EASRC_RUC(3),	0x00000000},
+	{REG_EASRC_RUR(0),	0x7FFFFFFF},
+	{REG_EASRC_RUR(1),	0x7FFFFFFF},
+	{REG_EASRC_RUR(2),	0x7FFFFFFF},
+	{REG_EASRC_RUR(3),	0x7FFFFFFF},
+	{REG_EASRC_RCTCL,	0x00000000},
+	{REG_EASRC_RCTCH,	0x00000000},
+	{REG_EASRC_PCF(0),	0x00000000},
+	{REG_EASRC_PCF(1),	0x00000000},
+	{REG_EASRC_PCF(2),	0x00000000},
+	{REG_EASRC_PCF(3),	0x00000000},
+	{REG_EASRC_CRCM,	0x00000000},
+	{REG_EASRC_CRCC,	0x00000000},
+	{REG_EASRC_IRQC,	0x00000FFF},
+	{REG_EASRC_IRQF,	0x00000000},
+	{REG_EASRC_CS0(0),	0x00000000},
+	{REG_EASRC_CS0(1),	0x00000000},
+	{REG_EASRC_CS0(2),	0x00000000},
+	{REG_EASRC_CS0(3),	0x00000000},
+	{REG_EASRC_CS1(0),	0x00000000},
+	{REG_EASRC_CS1(1),	0x00000000},
+	{REG_EASRC_CS1(2),	0x00000000},
+	{REG_EASRC_CS1(3),	0x00000000},
+	{REG_EASRC_CS2(0),	0x00000000},
+	{REG_EASRC_CS2(1),	0x00000000},
+	{REG_EASRC_CS2(2),	0x00000000},
+	{REG_EASRC_CS2(3),	0x00000000},
+	{REG_EASRC_CS3(0),	0x00000000},
+	{REG_EASRC_CS3(1),	0x00000000},
+	{REG_EASRC_CS3(2),	0x00000000},
+	{REG_EASRC_CS3(3),	0x00000000},
+	{REG_EASRC_CS4(0),	0x00000000},
+	{REG_EASRC_CS4(1),	0x00000000},
+	{REG_EASRC_CS4(2),	0x00000000},
+	{REG_EASRC_CS4(3),	0x00000000},
+	{REG_EASRC_CS5(0),	0x00000000},
+	{REG_EASRC_CS5(1),	0x00000000},
+	{REG_EASRC_CS5(2),	0x00000000},
+	{REG_EASRC_CS5(3),	0x00000000},
+	{REG_EASRC_DBGC,	0x00000000},
+	{REG_EASRC_DBGS,	0x00000000},
+};
+
+static const struct regmap_range fsl_easrc_readable_ranges[] = {
+	regmap_reg_range(REG_EASRC_RDFIFO(0), REG_EASRC_RCTCH),
+	regmap_reg_range(REG_EASRC_PCF(0), REG_EASRC_PCF(3)),
+	regmap_reg_range(REG_EASRC_CRCC, REG_EASRC_DBGS),
+};
+
+static const struct regmap_access_table fsl_easrc_readable_table = {
+	.yes_ranges = fsl_easrc_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(fsl_easrc_readable_ranges),
+};
+
+static const struct regmap_range fsl_easrc_writeable_ranges[] = {
+	regmap_reg_range(REG_EASRC_WRFIFO(0), REG_EASRC_WRFIFO(3)),
+	regmap_reg_range(REG_EASRC_CC(0), REG_EASRC_COA(3)),
+	regmap_reg_range(REG_EASRC_RRL(0), REG_EASRC_RCTCH),
+	regmap_reg_range(REG_EASRC_PCF(0), REG_EASRC_DBGC),
+};
+
+static const struct regmap_access_table fsl_easrc_writeable_table = {
+	.yes_ranges = fsl_easrc_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(fsl_easrc_writeable_ranges),
+};
+
+static const struct regmap_range fsl_easrc_volatileable_ranges[] = {
+	regmap_reg_range(REG_EASRC_RDFIFO(0), REG_EASRC_RDFIFO(3)),
+	regmap_reg_range(REG_EASRC_SFS(0), REG_EASRC_SFS(3)),
+	regmap_reg_range(REG_EASRC_IRQF, REG_EASRC_IRQF),
+	regmap_reg_range(REG_EASRC_DBGS, REG_EASRC_DBGS),
+};
+
+static const struct regmap_access_table fsl_easrc_volatileable_table = {
+	.yes_ranges = fsl_easrc_volatileable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(fsl_easrc_volatileable_ranges),
+};
+
+static const struct regmap_config fsl_easrc_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+
+	.max_register = REG_EASRC_DBGS,
+	.reg_defaults = fsl_easrc_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(fsl_easrc_reg_defaults),
+	.rd_table = &fsl_easrc_readable_table,
+	.wr_table = &fsl_easrc_writeable_table,
+	.volatile_table = &fsl_easrc_volatileable_table,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+#ifdef DEBUG
+static void fsl_easrc_dump_firmware(struct fsl_asrc *easrc)
+{
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	struct asrc_firmware_hdr *firm = easrc_priv->firmware_hdr;
+	struct interp_params *interp = easrc_priv->interp;
+	struct prefil_params *prefil = easrc_priv->prefil;
+	struct device *dev = &easrc->pdev->dev;
+	int i;
+
+	if (firm->magic != FIRMWARE_MAGIC) {
+		dev_err(dev, "Wrong magic. Something went wrong!");
+		return;
+	}
+
+	dev_dbg(dev, "Firmware v%u dump:\n", firm->firmware_version);
+	dev_dbg(dev, "Num prefilter scenarios: %u\n", firm->prefil_scen);
+	dev_dbg(dev, "Num interpolation scenarios: %u\n", firm->interp_scen);
+	dev_dbg(dev, "\nInterpolation scenarios:\n");
+
+	for (i = 0; i < firm->interp_scen; i++) {
+		if (interp[i].magic != FIRMWARE_MAGIC) {
+			dev_dbg(dev, "%d. wrong interp magic: %x\n",
+				i, interp[i].magic);
+			continue;
+		}
+		dev_dbg(dev, "%d. taps: %u, phases: %u, center: %llu\n", i,
+			interp[i].num_taps, interp[i].num_phases,
+			interp[i].center_tap);
+	}
+
+	for (i = 0; i < firm->prefil_scen; i++) {
+		if (prefil[i].magic != FIRMWARE_MAGIC) {
+			dev_dbg(dev, "%d. wrong prefil magic: %x\n",
+				i, prefil[i].magic);
+			continue;
+		}
+		dev_dbg(dev, "%d. insr: %u, outsr: %u, st1: %u, st2: %u\n", i,
+			prefil[i].insr, prefil[i].outsr,
+			prefil[i].st1_taps, prefil[i].st2_taps);
+	}
+
+	dev_dbg(dev, "end of firmware dump\n");
+}
+#endif
+
+static int fsl_easrc_get_firmware(struct fsl_asrc *easrc)
+{
+	struct fsl_easrc_priv *easrc_priv;
+	const struct firmware **fw_p;
+	u32 pnum, inum, offset;
+	const u8 *data;
+	int ret;
+
+	if (!easrc)
+		return -EINVAL;
+
+	easrc_priv = easrc->private;
+	fw_p = &easrc_priv->fw;
+
+	ret = request_firmware(fw_p, easrc_priv->fw_name, &easrc->pdev->dev);
+	if (ret)
+		return ret;
+
+	data = easrc_priv->fw->data;
+
+	easrc_priv->firmware_hdr = (struct asrc_firmware_hdr *)data;
+	pnum = easrc_priv->firmware_hdr->prefil_scen;
+	inum = easrc_priv->firmware_hdr->interp_scen;
+
+	if (inum) {
+		offset = sizeof(struct asrc_firmware_hdr);
+		easrc_priv->interp = (struct interp_params *)(data + offset);
+	}
+
+	if (pnum) {
+		offset = sizeof(struct asrc_firmware_hdr) +
+				inum * sizeof(struct interp_params);
+		easrc_priv->prefil = (struct prefil_params *)(data + offset);
+	}
+
+#ifdef DEBUG
+	fsl_easrc_dump_firmware(easrc);
+#endif
+
+	return 0;
+}
+
+static irqreturn_t fsl_easrc_isr(int irq, void *dev_id)
+{
+	struct fsl_asrc *easrc = (struct fsl_asrc *)dev_id;
+	struct device *dev = &easrc->pdev->dev;
+	int val;
+
+	regmap_read(easrc->regmap, REG_EASRC_IRQF, &val);
+
+	if (val & EASRC_IRQF_OER_MASK)
+		dev_dbg(dev, "output FIFO underflow\n");
+
+	if (val & EASRC_IRQF_IFO_MASK)
+		dev_dbg(dev, "input FIFO overflow\n");
+
+	return IRQ_HANDLED;
+}
+
+static int fsl_easrc_get_fifo_addr(u8 dir, enum asrc_pair_index index)
+{
+	return REG_EASRC_FIFO(dir, index);
+}
+
+static const struct of_device_id fsl_easrc_dt_ids[] = {
+	{ .compatible = "fsl,imx8mn-easrc",},
+	{}
+};
+MODULE_DEVICE_TABLE(of, fsl_easrc_dt_ids);
+
+static int fsl_easrc_probe(struct platform_device *pdev)
+{
+	struct fsl_easrc_priv *easrc_priv;
+	struct device *dev = &pdev->dev;
+	struct fsl_asrc *easrc;
+	struct resource *res;
+	struct device_node *np;
+	void __iomem *regs;
+	int ret, irq;
+
+	easrc = devm_kzalloc(dev, sizeof(*easrc), GFP_KERNEL);
+	if (!easrc)
+		return -ENOMEM;
+
+	easrc_priv = devm_kzalloc(dev, sizeof(*easrc_priv), GFP_KERNEL);
+	if (!easrc_priv)
+		return -ENOMEM;
+
+	easrc->pdev = pdev;
+	easrc->private = easrc_priv;
+	np = dev->of_node;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs)) {
+		dev_err(&pdev->dev, "failed ioremap\n");
+		return PTR_ERR(regs);
+	}
+
+	easrc->paddr = res->start;
+
+	easrc->regmap = devm_regmap_init_mmio_clk(dev, "mem", regs,
+						  &fsl_easrc_regmap_config);
+	if (IS_ERR(easrc->regmap)) {
+		dev_err(dev, "failed to init regmap");
+		return PTR_ERR(easrc->regmap);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "no irq for node %pOF\n", np);
+		return irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, fsl_easrc_isr, 0,
+			       dev_name(dev), easrc);
+	if (ret) {
+		dev_err(dev, "failed to claim irq %u: %d\n", irq, ret);
+		return ret;
+	}
+
+	easrc->mem_clk = devm_clk_get(dev, "mem");
+	if (IS_ERR(easrc->mem_clk)) {
+		dev_err(dev, "failed to get mem clock\n");
+		return PTR_ERR(easrc->mem_clk);
+	}
+
+	/* Set default value */
+	easrc->channel_avail = 32;
+	easrc->get_dma_channel = fsl_easrc_get_dma_channel;
+	easrc->request_pair = fsl_easrc_request_context;
+	easrc->release_pair = fsl_easrc_release_context;
+	easrc->get_fifo_addr = fsl_easrc_get_fifo_addr;
+	easrc->pair_priv_size = sizeof(struct fsl_easrc_ctx_priv);
+
+	easrc_priv->rs_num_taps = EASRC_RS_32_TAPS;
+	easrc_priv->const_coeff = 0x3FF0000000000000;
+
+	ret = of_property_read_u32(np, "fsl,asrc-rate", &easrc->asrc_rate);
+	if (ret) {
+		dev_err(dev, "failed to asrc rate\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "fsl,asrc-format", &easrc->asrc_format);
+	if (ret) {
+		dev_err(dev, "failed to asrc format\n");
+		return ret;
+	}
+
+	if (!(FSL_EASRC_FORMATS & (1ULL << easrc->asrc_format))) {
+		dev_warn(dev, "unsupported format, switching to S24_LE\n");
+		easrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
+	}
+
+	ret = of_property_read_string(np, "firmware-name",
+				      &easrc_priv->fw_name);
+	if (ret) {
+		dev_err(dev, "failed to get firmware name\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, easrc);
+	pm_runtime_enable(dev);
+
+	spin_lock_init(&easrc->lock);
+
+	regcache_cache_only(easrc->regmap, true);
+
+	ret = devm_snd_soc_register_component(dev, &fsl_easrc_component,
+					      &fsl_easrc_dai, 1);
+	if (ret) {
+		dev_err(dev, "failed to register ASoC DAI\n");
+		return ret;
+	}
+
+	ret = devm_snd_soc_register_component(dev, &fsl_asrc_component,
+					      NULL, 0);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register ASoC platform\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int fsl_easrc_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static __maybe_unused int fsl_easrc_runtime_suspend(struct device *dev)
+{
+	struct fsl_asrc *easrc = dev_get_drvdata(dev);
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	unsigned long lock_flags;
+
+	regcache_cache_only(easrc->regmap, true);
+
+	clk_disable_unprepare(easrc->mem_clk);
+
+	spin_lock_irqsave(&easrc->lock, lock_flags);
+	easrc_priv->firmware_loaded = 0;
+	spin_unlock_irqrestore(&easrc->lock, lock_flags);
+
+	return 0;
+}
+
+static __maybe_unused int fsl_easrc_runtime_resume(struct device *dev)
+{
+	struct fsl_asrc *easrc = dev_get_drvdata(dev);
+	struct fsl_easrc_priv *easrc_priv = easrc->private;
+	struct fsl_easrc_ctx_priv *ctx_priv;
+	struct fsl_asrc_pair *ctx;
+	unsigned long lock_flags;
+	int ret;
+	int i;
+
+	ret = clk_prepare_enable(easrc->mem_clk);
+	if (ret)
+		return ret;
+
+	regcache_cache_only(easrc->regmap, false);
+	regcache_mark_dirty(easrc->regmap);
+	regcache_sync(easrc->regmap);
+
+	spin_lock_irqsave(&easrc->lock, lock_flags);
+	if (easrc_priv->firmware_loaded) {
+		spin_unlock_irqrestore(&easrc->lock, lock_flags);
+		goto skip_load;
+	}
+	easrc_priv->firmware_loaded = 1;
+	spin_unlock_irqrestore(&easrc->lock, lock_flags);
+
+	ret = fsl_easrc_get_firmware(easrc);
+	if (ret) {
+		dev_err(dev, "failed to get firmware\n");
+		goto disable_mem_clk;
+	}
+
+	/*
+	 * Write Resampling Coefficients
+	 * The coefficient RAM must be configured prior to beginning of
+	 * any context processing within the ASRC
+	 */
+	ret = fsl_easrc_resampler_config(easrc);
+	if (ret) {
+		dev_err(dev, "resampler config failed\n");
+		goto disable_mem_clk;
+	}
+
+	for (i = ASRC_PAIR_A; i < EASRC_CTX_MAX_NUM; i++) {
+		ctx = easrc->pair[i];
+		if (!ctx)
+			continue;
+
+		ctx_priv = ctx->private;
+		fsl_easrc_set_rs_ratio(ctx);
+		ctx_priv->out_missed_sample = ctx_priv->in_filled_sample *
+					      ctx_priv->out_params.sample_rate /
+					      ctx_priv->in_params.sample_rate;
+		if (ctx_priv->in_filled_sample * ctx_priv->out_params.sample_rate
+		    % ctx_priv->in_params.sample_rate != 0)
+			ctx_priv->out_missed_sample += 1;
+
+		ret = fsl_easrc_write_pf_coeff_mem(easrc, i,
+						   ctx_priv->st1_coeff,
+						   ctx_priv->st1_num_taps,
+						   ctx_priv->st1_addexp);
+		if (ret)
+			goto disable_mem_clk;
+
+		ret = fsl_easrc_write_pf_coeff_mem(easrc, i,
+						   ctx_priv->st2_coeff,
+						   ctx_priv->st2_num_taps,
+						   ctx_priv->st2_addexp);
+		if (ret)
+			goto disable_mem_clk;
+	}
+
+skip_load:
+	return 0;
+
+disable_mem_clk:
+	clk_disable_unprepare(easrc->mem_clk);
+	return ret;
+}
+
+static const struct dev_pm_ops fsl_easrc_pm_ops = {
+	SET_RUNTIME_PM_OPS(fsl_easrc_runtime_suspend,
+			   fsl_easrc_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+};
+
+static struct platform_driver fsl_easrc_driver = {
+	.probe = fsl_easrc_probe,
+	.remove = fsl_easrc_remove,
+	.driver = {
+		.name = "fsl-easrc",
+		.pm = &fsl_easrc_pm_ops,
+		.of_match_table = fsl_easrc_dt_ids,
+	},
+};
+module_platform_driver(fsl_easrc_driver);
+
+MODULE_DESCRIPTION("NXP Enhanced Asynchronous Sample Rate (eASRC) driver");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/fsl/fsl_easrc.h b/sound/soc/fsl/fsl_easrc.h
new file mode 100644
index 000000000000..30620d56252c
--- /dev/null
+++ b/sound/soc/fsl/fsl_easrc.h
@@ -0,0 +1,651 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#ifndef _FSL_EASRC_H
+#define _FSL_EASRC_H
+
+#include <sound/asound.h>
+#include <linux/platform_data/dma-imx.h>
+
+#include "fsl_asrc_common.h"
+
+/* EASRC Register Map */
+
+/* ASRC Input Write FIFO */
+#define REG_EASRC_WRFIFO(ctx)		(0x000 + 4 * (ctx))
+/* ASRC Output Read FIFO */
+#define REG_EASRC_RDFIFO(ctx)		(0x010 + 4 * (ctx))
+/* ASRC Context Control */
+#define REG_EASRC_CC(ctx)		(0x020 + 4 * (ctx))
+/* ASRC Context Control Extended 1 */
+#define REG_EASRC_CCE1(ctx)		(0x030 + 4 * (ctx))
+/* ASRC Context Control Extended 2 */
+#define REG_EASRC_CCE2(ctx)		(0x040 + 4 * (ctx))
+/* ASRC Control Input Access */
+#define REG_EASRC_CIA(ctx)		(0x050 + 4 * (ctx))
+/* ASRC Datapath Processor Control Slot0 */
+#define REG_EASRC_DPCS0R0(ctx)		(0x060 + 4 * (ctx))
+#define REG_EASRC_DPCS0R1(ctx)		(0x070 + 4 * (ctx))
+#define REG_EASRC_DPCS0R2(ctx)		(0x080 + 4 * (ctx))
+#define REG_EASRC_DPCS0R3(ctx)		(0x090 + 4 * (ctx))
+/* ASRC Datapath Processor Control Slot1 */
+#define REG_EASRC_DPCS1R0(ctx)		(0x0A0 + 4 * (ctx))
+#define REG_EASRC_DPCS1R1(ctx)		(0x0B0 + 4 * (ctx))
+#define REG_EASRC_DPCS1R2(ctx)		(0x0C0 + 4 * (ctx))
+#define REG_EASRC_DPCS1R3(ctx)		(0x0D0 + 4 * (ctx))
+/* ASRC Context Output Control */
+#define REG_EASRC_COC(ctx)		(0x0E0 + 4 * (ctx))
+/* ASRC Control Output Access */
+#define REG_EASRC_COA(ctx)		(0x0F0 + 4 * (ctx))
+/* ASRC Sample FIFO Status */
+#define REG_EASRC_SFS(ctx)		(0x100 + 4 * (ctx))
+/* ASRC Resampling Ratio Low */
+#define REG_EASRC_RRL(ctx)		(0x110 + 8 * (ctx))
+/* ASRC Resampling Ratio High */
+#define REG_EASRC_RRH(ctx)		(0x114 + 8 * (ctx))
+/* ASRC Resampling Ratio Update Control */
+#define REG_EASRC_RUC(ctx)		(0x130 + 4 * (ctx))
+/* ASRC Resampling Ratio Update Rate */
+#define REG_EASRC_RUR(ctx)		(0x140 + 4 * (ctx))
+/* ASRC Resampling Center Tap Coefficient Low */
+#define REG_EASRC_RCTCL			(0x150)
+/* ASRC Resampling Center Tap Coefficient High */
+#define REG_EASRC_RCTCH			(0x154)
+/* ASRC Prefilter Coefficient FIFO */
+#define REG_EASRC_PCF(ctx)		(0x160 + 4 * (ctx))
+/* ASRC Context Resampling Coefficient Memory */
+#define REG_EASRC_CRCM			0x170
+/* ASRC Context Resampling Coefficient Control*/
+#define REG_EASRC_CRCC			0x174
+/* ASRC Interrupt Control */
+#define REG_EASRC_IRQC			0x178
+/* ASRC Interrupt Status Flags */
+#define REG_EASRC_IRQF			0x17C
+/* ASRC Channel Status 0 */
+#define REG_EASRC_CS0(ctx)		(0x180 + 4 * (ctx))
+/* ASRC Channel Status 1 */
+#define REG_EASRC_CS1(ctx)		(0x190 + 4 * (ctx))
+/* ASRC Channel Status 2 */
+#define REG_EASRC_CS2(ctx)		(0x1A0 + 4 * (ctx))
+/* ASRC Channel Status 3 */
+#define REG_EASRC_CS3(ctx)		(0x1B0 + 4 * (ctx))
+/* ASRC Channel Status 4 */
+#define REG_EASRC_CS4(ctx)		(0x1C0 + 4 * (ctx))
+/* ASRC Channel Status 5 */
+#define REG_EASRC_CS5(ctx)		(0x1D0 + 4 * (ctx))
+/* ASRC Debug Control Register */
+#define REG_EASRC_DBGC			0x1E0
+/* ASRC Debug Status Register */
+#define REG_EASRC_DBGS			0x1E4
+
+#define REG_EASRC_FIFO(x, ctx)		(x == IN ? REG_EASRC_WRFIFO(ctx) \
+						: REG_EASRC_RDFIFO(ctx))
+
+/* ASRC Context Control (CC) */
+#define EASRC_CC_EN_SHIFT		31
+#define EASRC_CC_EN_MASK		BIT(EASRC_CC_EN_SHIFT)
+#define EASRC_CC_EN			BIT(EASRC_CC_EN_SHIFT)
+#define EASRC_CC_STOP_SHIFT		29
+#define EASRC_CC_STOP_MASK		BIT(EASRC_CC_STOP_SHIFT)
+#define EASRC_CC_STOP			BIT(EASRC_CC_STOP_SHIFT)
+#define EASRC_CC_FWMDE_SHIFT		28
+#define EASRC_CC_FWMDE_MASK		BIT(EASRC_CC_FWMDE_SHIFT)
+#define EASRC_CC_FWMDE			BIT(EASRC_CC_FWMDE_SHIFT)
+#define EASRC_CC_FIFO_WTMK_SHIFT	16
+#define EASRC_CC_FIFO_WTMK_WIDTH	7
+#define EASRC_CC_FIFO_WTMK_MASK		((BIT(EASRC_CC_FIFO_WTMK_WIDTH) - 1) \
+					 << EASRC_CC_FIFO_WTMK_SHIFT)
+#define EASRC_CC_FIFO_WTMK(v)		(((v) << EASRC_CC_FIFO_WTMK_SHIFT) \
+					 & EASRC_CC_FIFO_WTMK_MASK)
+#define EASRC_CC_SAMPLE_POS_SHIFT	11
+#define EASRC_CC_SAMPLE_POS_WIDTH	5
+#define EASRC_CC_SAMPLE_POS_MASK	((BIT(EASRC_CC_SAMPLE_POS_WIDTH) - 1) \
+					 << EASRC_CC_SAMPLE_POS_SHIFT)
+#define EASRC_CC_SAMPLE_POS(v)		(((v) << EASRC_CC_SAMPLE_POS_SHIFT) \
+					 & EASRC_CC_SAMPLE_POS_MASK)
+#define EASRC_CC_ENDIANNESS_SHIFT	10
+#define EASRC_CC_ENDIANNESS_MASK	BIT(EASRC_CC_ENDIANNESS_SHIFT)
+#define EASRC_CC_ENDIANNESS		BIT(EASRC_CC_ENDIANNESS_SHIFT)
+#define EASRC_CC_BPS_SHIFT		8
+#define EASRC_CC_BPS_WIDTH		2
+#define EASRC_CC_BPS_MASK		((BIT(EASRC_CC_BPS_WIDTH) - 1) \
+					 << EASRC_CC_BPS_SHIFT)
+#define EASRC_CC_BPS(v)			(((v) << EASRC_CC_BPS_SHIFT) \
+					 & EASRC_CC_BPS_MASK)
+#define EASRC_CC_FMT_SHIFT		7
+#define EASRC_CC_FMT_MASK		BIT(EASRC_CC_FMT_SHIFT)
+#define EASRC_CC_FMT			BIT(EASRC_CC_FMT_SHIFT)
+#define EASRC_CC_INSIGN_SHIFT		6
+#define EASRC_CC_INSIGN_MASK		BIT(EASRC_CC_INSIGN_SHIFT)
+#define EASRC_CC_INSIGN			BIT(EASRC_CC_INSIGN_SHIFT)
+#define EASRC_CC_CHEN_SHIFT		0
+#define EASRC_CC_CHEN_WIDTH		5
+#define EASRC_CC_CHEN_MASK		((BIT(EASRC_CC_CHEN_WIDTH) - 1) \
+					 << EASRC_CC_CHEN_SHIFT)
+#define EASRC_CC_CHEN(v)		(((v) << EASRC_CC_CHEN_SHIFT) \
+					 & EASRC_CC_CHEN_MASK)
+
+/* ASRC Context Control Extended 1 (CCE1) */
+#define EASRC_CCE1_COEF_WS_SHIFT	25
+#define EASRC_CCE1_COEF_WS_MASK		BIT(EASRC_CCE1_COEF_WS_SHIFT)
+#define EASRC_CCE1_COEF_WS		BIT(EASRC_CCE1_COEF_WS_SHIFT)
+#define EASRC_CCE1_COEF_MEM_RST_SHIFT	24
+#define EASRC_CCE1_COEF_MEM_RST_MASK	BIT(EASRC_CCE1_COEF_MEM_RST_SHIFT)
+#define EASRC_CCE1_COEF_MEM_RST		BIT(EASRC_CCE1_COEF_MEM_RST_SHIFT)
+#define EASRC_CCE1_PF_EXP_SHIFT		16
+#define EASRC_CCE1_PF_EXP_WIDTH		8
+#define EASRC_CCE1_PF_EXP_MASK		((BIT(EASRC_CCE1_PF_EXP_WIDTH) - 1) \
+					 << EASRC_CCE1_PF_EXP_SHIFT)
+#define EASRC_CCE1_PF_EXP(v)		(((v) << EASRC_CCE1_PF_EXP_SHIFT) \
+					 & EASRC_CCE1_PF_EXP_MASK)
+#define EASRC_CCE1_PF_ST1_WBFP_SHIFT	9
+#define EASRC_CCE1_PF_ST1_WBFP_MASK	BIT(EASRC_CCE1_PF_ST1_WBFP_SHIFT)
+#define EASRC_CCE1_PF_ST1_WBFP		BIT(EASRC_CCE1_PF_ST1_WBFP_SHIFT)
+#define EASRC_CCE1_PF_TSEN_SHIFT	8
+#define EASRC_CCE1_PF_TSEN_MASK		BIT(EASRC_CCE1_PF_TSEN_SHIFT)
+#define EASRC_CCE1_PF_TSEN		BIT(EASRC_CCE1_PF_TSEN_SHIFT)
+#define EASRC_CCE1_RS_BYPASS_SHIFT	7
+#define EASRC_CCE1_RS_BYPASS_MASK	BIT(EASRC_CCE1_RS_BYPASS_SHIFT)
+#define EASRC_CCE1_RS_BYPASS		BIT(EASRC_CCE1_RS_BYPASS_SHIFT)
+#define EASRC_CCE1_PF_BYPASS_SHIFT	6
+#define EASRC_CCE1_PF_BYPASS_MASK	BIT(EASRC_CCE1_PF_BYPASS_SHIFT)
+#define EASRC_CCE1_PF_BYPASS		BIT(EASRC_CCE1_PF_BYPASS_SHIFT)
+#define EASRC_CCE1_RS_STOP_SHIFT	5
+#define EASRC_CCE1_RS_STOP_MASK		BIT(EASRC_CCE1_RS_STOP_SHIFT)
+#define EASRC_CCE1_RS_STOP		BIT(EASRC_CCE1_RS_STOP_SHIFT)
+#define EASRC_CCE1_PF_STOP_SHIFT	4
+#define EASRC_CCE1_PF_STOP_MASK		BIT(EASRC_CCE1_PF_STOP_SHIFT)
+#define EASRC_CCE1_PF_STOP		BIT(EASRC_CCE1_PF_STOP_SHIFT)
+#define EASRC_CCE1_RS_INIT_SHIFT	2
+#define EASRC_CCE1_RS_INIT_WIDTH	2
+#define EASRC_CCE1_RS_INIT_MASK		((BIT(EASRC_CCE1_RS_INIT_WIDTH) - 1) \
+					 << EASRC_CCE1_RS_INIT_SHIFT)
+#define EASRC_CCE1_RS_INIT(v)		(((v) << EASRC_CCE1_RS_INIT_SHIFT) \
+					 & EASRC_CCE1_RS_INIT_MASK)
+#define EASRC_CCE1_PF_INIT_SHIFT	0
+#define EASRC_CCE1_PF_INIT_WIDTH	2
+#define EASRC_CCE1_PF_INIT_MASK		((BIT(EASRC_CCE1_PF_INIT_WIDTH) - 1) \
+					 << EASRC_CCE1_PF_INIT_SHIFT)
+#define EASRC_CCE1_PF_INIT(v)		(((v) << EASRC_CCE1_PF_INIT_SHIFT) \
+					 & EASRC_CCE1_PF_INIT_MASK)
+
+/* ASRC Context Control Extended 2 (CCE2) */
+#define EASRC_CCE2_ST2_TAPS_SHIFT	16
+#define EASRC_CCE2_ST2_TAPS_WIDTH	9
+#define EASRC_CCE2_ST2_TAPS_MASK	((BIT(EASRC_CCE2_ST2_TAPS_WIDTH) - 1) \
+					 << EASRC_CCE2_ST2_TAPS_SHIFT)
+#define EASRC_CCE2_ST2_TAPS(v)		(((v) << EASRC_CCE2_ST2_TAPS_SHIFT) \
+					 & EASRC_CCE2_ST2_TAPS_MASK)
+#define EASRC_CCE2_ST1_TAPS_SHIFT	0
+#define EASRC_CCE2_ST1_TAPS_WIDTH	9
+#define EASRC_CCE2_ST1_TAPS_MASK	((BIT(EASRC_CCE2_ST1_TAPS_WIDTH) - 1) \
+					 << EASRC_CCE2_ST1_TAPS_SHIFT)
+#define EASRC_CCE2_ST1_TAPS(v)		(((v) << EASRC_CCE2_ST1_TAPS_SHIFT) \
+					 & EASRC_CCE2_ST1_TAPS_MASK)
+
+/* ASRC Control Input Access (CIA) */
+#define EASRC_CIA_ITER_SHIFT		16
+#define EASRC_CIA_ITER_WIDTH		6
+#define EASRC_CIA_ITER_MASK		((BIT(EASRC_CIA_ITER_WIDTH) - 1) \
+					 << EASRC_CIA_ITER_SHIFT)
+#define EASRC_CIA_ITER(v)		(((v) << EASRC_CIA_ITER_SHIFT) \
+					 & EASRC_CIA_ITER_MASK)
+#define EASRC_CIA_GRLEN_SHIFT		8
+#define EASRC_CIA_GRLEN_WIDTH		6
+#define EASRC_CIA_GRLEN_MASK		((BIT(EASRC_CIA_GRLEN_WIDTH) - 1) \
+					 << EASRC_CIA_GRLEN_SHIFT)
+#define EASRC_CIA_GRLEN(v)		(((v) << EASRC_CIA_GRLEN_SHIFT) \
+					 & EASRC_CIA_GRLEN_MASK)
+#define EASRC_CIA_ACCLEN_SHIFT		0
+#define EASRC_CIA_ACCLEN_WIDTH		6
+#define EASRC_CIA_ACCLEN_MASK		((BIT(EASRC_CIA_ACCLEN_WIDTH) - 1) \
+					 << EASRC_CIA_ACCLEN_SHIFT)
+#define EASRC_CIA_ACCLEN(v)		(((v) << EASRC_CIA_ACCLEN_SHIFT) \
+					 & EASRC_CIA_ACCLEN_MASK)
+
+/* ASRC Datapath Processor Control Slot0 Register0 (DPCS0R0) */
+#define EASRC_DPCS0R0_MAXCH_SHIFT	24
+#define EASRC_DPCS0R0_MAXCH_WIDTH	5
+#define EASRC_DPCS0R0_MAXCH_MASK	((BIT(EASRC_DPCS0R0_MAXCH_WIDTH) - 1) \
+					 << EASRC_DPCS0R0_MAXCH_SHIFT)
+#define EASRC_DPCS0R0_MAXCH(v)		(((v) << EASRC_DPCS0R0_MAXCH_SHIFT) \
+					 & EASRC_DPCS0R0_MAXCH_MASK)
+#define EASRC_DPCS0R0_MINCH_SHIFT	16
+#define EASRC_DPCS0R0_MINCH_WIDTH	5
+#define EASRC_DPCS0R0_MINCH_MASK	((BIT(EASRC_DPCS0R0_MINCH_WIDTH) - 1) \
+					 << EASRC_DPCS0R0_MINCH_SHIFT)
+#define EASRC_DPCS0R0_MINCH(v)		(((v) << EASRC_DPCS0R0_MINCH_SHIFT) \
+					 & EASRC_DPCS0R0_MINCH_MASK)
+#define EASRC_DPCS0R0_NUMCH_SHIFT	8
+#define EASRC_DPCS0R0_NUMCH_WIDTH	5
+#define EASRC_DPCS0R0_NUMCH_MASK	((BIT(EASRC_DPCS0R0_NUMCH_WIDTH) - 1) \
+					 << EASRC_DPCS0R0_NUMCH_SHIFT)
+#define EASRC_DPCS0R0_NUMCH(v)		(((v) << EASRC_DPCS0R0_NUMCH_SHIFT) \
+					 & EASRC_DPCS0R0_NUMCH_MASK)
+#define EASRC_DPCS0R0_CTXNUM_SHIFT	1
+#define EASRC_DPCS0R0_CTXNUM_WIDTH	2
+#define EASRC_DPCS0R0_CTXNUM_MASK	((BIT(EASRC_DPCS0R0_CTXNUM_WIDTH) - 1) \
+					 << EASRC_DPCS0R0_CTXNUM_SHIFT)
+#define EASRC_DPCS0R0_CTXNUM(v)		(((v) << EASRC_DPCS0R0_CTXNUM_SHIFT) \
+					 & EASRC_DPCS0R0_CTXNUM_MASK)
+#define EASRC_DPCS0R0_EN_SHIFT		0
+#define EASRC_DPCS0R0_EN_MASK		BIT(EASRC_DPCS0R0_EN_SHIFT)
+#define EASRC_DPCS0R0_EN		BIT(EASRC_DPCS0R0_EN_SHIFT)
+
+/* ASRC Datapath Processor Control Slot0 Register1 (DPCS0R1) */
+#define EASRC_DPCS0R1_ST1_EXP_SHIFT	0
+#define EASRC_DPCS0R1_ST1_EXP_WIDTH	13
+#define EASRC_DPCS0R1_ST1_EXP_MASK	((BIT(EASRC_DPCS0R1_ST1_EXP_WIDTH) - 1) \
+					 << EASRC_DPCS0R1_ST1_EXP_SHIFT)
+#define EASRC_DPCS0R1_ST1_EXP(v)	(((v) << EASRC_DPCS0R1_ST1_EXP_SHIFT) \
+					 & EASRC_DPCS0R1_ST1_EXP_MASK)
+
+/* ASRC Datapath Processor Control Slot0 Register2 (DPCS0R2) */
+#define EASRC_DPCS0R2_ST1_MA_SHIFT	16
+#define EASRC_DPCS0R2_ST1_MA_WIDTH	13
+#define EASRC_DPCS0R2_ST1_MA_MASK	((BIT(EASRC_DPCS0R2_ST1_MA_WIDTH) - 1) \
+					 << EASRC_DPCS0R2_ST1_MA_SHIFT)
+#define EASRC_DPCS0R2_ST1_MA(v)		(((v) << EASRC_DPCS0R2_ST1_MA_SHIFT) \
+					 & EASRC_DPCS0R2_ST1_MA_MASK)
+#define EASRC_DPCS0R2_ST1_SA_SHIFT	0
+#define EASRC_DPCS0R2_ST1_SA_WIDTH	13
+#define EASRC_DPCS0R2_ST1_SA_MASK	((BIT(EASRC_DPCS0R2_ST1_SA_WIDTH) - 1) \
+					 << EASRC_DPCS0R2_ST1_SA_SHIFT)
+#define EASRC_DPCS0R2_ST1_SA(v)		(((v) << EASRC_DPCS0R2_ST1_SA_SHIFT) \
+					 & EASRC_DPCS0R2_ST1_SA_MASK)
+
+/* ASRC Datapath Processor Control Slot0 Register3 (DPCS0R3) */
+#define EASRC_DPCS0R3_ST2_MA_SHIFT	16
+#define EASRC_DPCS0R3_ST2_MA_WIDTH	13
+#define EASRC_DPCS0R3_ST2_MA_MASK	((BIT(EASRC_DPCS0R3_ST2_MA_WIDTH) - 1) \
+					 << EASRC_DPCS0R3_ST2_MA_SHIFT)
+#define EASRC_DPCS0R3_ST2_MA(v)		(((v) << EASRC_DPCS0R3_ST2_MA_SHIFT) \
+					 & EASRC_DPCS0R3_ST2_MA_MASK)
+#define EASRC_DPCS0R3_ST2_SA_SHIFT	0
+#define EASRC_DPCS0R3_ST2_SA_WIDTH	13
+#define EASRC_DPCS0R3_ST2_SA_MASK	((BIT(EASRC_DPCS0R3_ST2_SA_WIDTH) - 1) \
+					 << EASRC_DPCS0R3_ST2_SA_SHIFT)
+#define EASRC_DPCS0R3_ST2_SA(v)		(((v) << EASRC_DPCS0R3_ST2_SA_SHIFT) \
+						 & EASRC_DPCS0R3_ST2_SA_MASK)
+
+/* ASRC Context Output Control (COC) */
+#define EASRC_COC_FWMDE_SHIFT		28
+#define EASRC_COC_FWMDE_MASK		BIT(EASRC_COC_FWMDE_SHIFT)
+#define EASRC_COC_FWMDE			BIT(EASRC_COC_FWMDE_SHIFT)
+#define EASRC_COC_FIFO_WTMK_SHIFT	16
+#define EASRC_COC_FIFO_WTMK_WIDTH	7
+#define EASRC_COC_FIFO_WTMK_MASK	((BIT(EASRC_COC_FIFO_WTMK_WIDTH) - 1) \
+					 << EASRC_COC_FIFO_WTMK_SHIFT)
+#define EASRC_COC_FIFO_WTMK(v)		(((v) << EASRC_COC_FIFO_WTMK_SHIFT) \
+					 & EASRC_COC_FIFO_WTMK_MASK)
+#define EASRC_COC_SAMPLE_POS_SHIFT	11
+#define EASRC_COC_SAMPLE_POS_WIDTH	5
+#define EASRC_COC_SAMPLE_POS_MASK	((BIT(EASRC_COC_SAMPLE_POS_WIDTH) - 1) \
+					 << EASRC_COC_SAMPLE_POS_SHIFT)
+#define EASRC_COC_SAMPLE_POS(v)		(((v) << EASRC_COC_SAMPLE_POS_SHIFT) \
+					 & EASRC_COC_SAMPLE_POS_MASK)
+#define EASRC_COC_ENDIANNESS_SHIFT	10
+#define EASRC_COC_ENDIANNESS_MASK	BIT(EASRC_COC_ENDIANNESS_SHIFT)
+#define EASRC_COC_ENDIANNESS		BIT(EASRC_COC_ENDIANNESS_SHIFT)
+#define EASRC_COC_BPS_SHIFT		8
+#define EASRC_COC_BPS_WIDTH		2
+#define EASRC_COC_BPS_MASK		((BIT(EASRC_COC_BPS_WIDTH) - 1) \
+					 << EASRC_COC_BPS_SHIFT)
+#define EASRC_COC_BPS(v)		(((v) << EASRC_COC_BPS_SHIFT) \
+					 & EASRC_COC_BPS_MASK)
+#define EASRC_COC_FMT_SHIFT		7
+#define EASRC_COC_FMT_MASK		BIT(EASRC_COC_FMT_SHIFT)
+#define EASRC_COC_FMT			BIT(EASRC_COC_FMT_SHIFT)
+#define EASRC_COC_OUTSIGN_SHIFT		6
+#define EASRC_COC_OUTSIGN_MASK		BIT(EASRC_COC_OUTSIGN_SHIFT)
+#define EASRC_COC_OUTSIGN_OUT		BIT(EASRC_COC_OUTSIGN_SHIFT)
+#define EASRC_COC_IEC_VDATA_SHIFT	2
+#define EASRC_COC_IEC_VDATA_MASK	BIT(EASRC_COC_IEC_VDATA_SHIFT)
+#define EASRC_COC_IEC_VDATA		BIT(EASRC_COC_IEC_VDATA_SHIFT)
+#define EASRC_COC_IEC_EN_SHIFT		1
+#define EASRC_COC_IEC_EN_MASK		BIT(EASRC_COC_IEC_EN_SHIFT)
+#define EASRC_COC_IEC_EN		BIT(EASRC_COC_IEC_EN_SHIFT)
+#define EASRC_COC_DITHER_EN_SHIFT	0
+#define EASRC_COC_DITHER_EN_MASK	BIT(EASRC_COC_DITHER_EN_SHIFT)
+#define EASRC_COC_DITHER_EN		BIT(EASRC_COC_DITHER_EN_SHIFT)
+
+/* ASRC Control Output Access (COA) */
+#define EASRC_COA_ITER_SHIFT		16
+#define EASRC_COA_ITER_WIDTH		6
+#define EASRC_COA_ITER_MASK		((BIT(EASRC_COA_ITER_WIDTH) - 1) \
+					 << EASRC_COA_ITER_SHIFT)
+#define EASRC_COA_ITER(v)		(((v) << EASRC_COA_ITER_SHIFT) \
+					 & EASRC_COA_ITER_MASK)
+#define EASRC_COA_GRLEN_SHIFT		8
+#define EASRC_COA_GRLEN_WIDTH		6
+#define EASRC_COA_GRLEN_MASK		((BIT(EASRC_COA_GRLEN_WIDTH) - 1) \
+					 << EASRC_COA_GRLEN_SHIFT)
+#define EASRC_COA_GRLEN(v)		(((v) << EASRC_COA_GRLEN_SHIFT) \
+					 & EASRC_COA_GRLEN_MASK)
+#define EASRC_COA_ACCLEN_SHIFT		0
+#define EASRC_COA_ACCLEN_WIDTH		6
+#define EASRC_COA_ACCLEN_MASK		((BIT(EASRC_COA_ACCLEN_WIDTH) - 1) \
+					 << EASRC_COA_ACCLEN_SHIFT)
+#define EASRC_COA_ACCLEN(v)		(((v) << EASRC_COA_ACCLEN_SHIFT) \
+					 & EASRC_COA_ACCLEN_MASK)
+
+/* ASRC Sample FIFO Status (SFS) */
+#define EASRC_SFS_IWTMK_SHIFT		23
+#define EASRC_SFS_IWTMK_MASK		BIT(EASRC_SFS_IWTMK_SHIFT)
+#define EASRC_SFS_IWTMK			BIT(EASRC_SFS_IWTMK_SHIFT)
+#define EASRC_SFS_NSGI_SHIFT		16
+#define EASRC_SFS_NSGI_WIDTH		7
+#define EASRC_SFS_NSGI_MASK		((BIT(EASRC_SFS_NSGI_WIDTH) - 1) \
+					 << EASRC_SFS_NSGI_SHIFT)
+#define EASRC_SFS_NSGI(v)		(((v) << EASRC_SFS_NSGI_SHIFT) \
+					 & EASRC_SFS_NSGI_MASK)
+#define EASRC_SFS_OWTMK_SHIFT		7
+#define EASRC_SFS_OWTMK_MASK		BIT(EASRC_SFS_OWTMK_SHIFT)
+#define EASRC_SFS_OWTMK			BIT(EASRC_SFS_OWTMK_SHIFT)
+#define EASRC_SFS_NSGO_SHIFT		0
+#define EASRC_SFS_NSGO_WIDTH		7
+#define EASRC_SFS_NSGO_MASK		((BIT(EASRC_SFS_NSGO_WIDTH) - 1) \
+					 << EASRC_SFS_NSGO_SHIFT)
+#define EASRC_SFS_NSGO(v)		(((v) << EASRC_SFS_NSGO_SHIFT) \
+					 & EASRC_SFS_NSGO_MASK)
+
+/* ASRC Resampling Ratio Low (RRL) */
+#define EASRC_RRL_RS_RL_SHIFT		0
+#define EASRC_RRL_RS_RL_WIDTH		32
+#define EASRC_RRL_RS_RL(v)		((v) << EASRC_RRL_RS_RL_SHIFT)
+
+/* ASRC Resampling Ratio High (RRH) */
+#define EASRC_RRH_RS_VLD_SHIFT		31
+#define EASRC_RRH_RS_VLD_MASK		BIT(EASRC_RRH_RS_VLD_SHIFT)
+#define EASRC_RRH_RS_VLD		BIT(EASRC_RRH_RS_VLD_SHIFT)
+#define EASRC_RRH_RS_RH_SHIFT		0
+#define EASRC_RRH_RS_RH_WIDTH		12
+#define EASRC_RRH_RS_RH_MASK		((BIT(EASRC_RRH_RS_RH_WIDTH) - 1) \
+					 << EASRC_RRH_RS_RH_SHIFT)
+#define EASRC_RRH_RS_RH(v)		(((v) << EASRC_RRH_RS_RH_SHIFT) \
+					 & EASRC_RRH_RS_RH_MASK)
+
+/* ASRC Resampling Ratio Update Control (RSUC) */
+#define EASRC_RSUC_RS_RM_SHIFT		0
+#define EASRC_RSUC_RS_RM_WIDTH		32
+#define EASRC_RSUC_RS_RM(v)		((v) << EASRC_RSUC_RS_RM_SHIFT)
+
+/* ASRC Resampling Ratio Update Rate (RRUR) */
+#define EASRC_RRUR_RRR_SHIFT		0
+#define EASRC_RRUR_RRR_WIDTH		31
+#define EASRC_RRUR_RRR_MASK		((BIT(EASRC_RRUR_RRR_WIDTH) - 1) \
+					 << EASRC_RRUR_RRR_SHIFT)
+#define EASRC_RRUR_RRR(v)		(((v) << EASRC_RRUR_RRR_SHIFT) \
+					 & EASRC_RRUR_RRR_MASK)
+
+/* ASRC Resampling Center Tap Coefficient Low (RCTCL) */
+#define EASRC_RCTCL_RS_CL_SHIFT		0
+#define EASRC_RCTCL_RS_CL_WIDTH		32
+#define EASRC_RCTCL_RS_CL(v)		((v) << EASRC_RCTCL_RS_CL_SHIFT)
+
+/* ASRC Resampling Center Tap Coefficient High (RCTCH) */
+#define EASRC_RCTCH_RS_CH_SHIFT		0
+#define EASRC_RCTCH_RS_CH_WIDTH		32
+#define EASRC_RCTCH_RS_CH(v)		((v) << EASRC_RCTCH_RS_CH_SHIFT)
+
+/* ASRC Prefilter Coefficient FIFO (PCF) */
+#define EASRC_PCF_CD_SHIFT		0
+#define EASRC_PCF_CD_WIDTH		32
+#define EASRC_PCF_CD(v)			((v) << EASRC_PCF_CD_SHIFT)
+
+/* ASRC Context Resampling Coefficient Memory (CRCM) */
+#define EASRC_CRCM_RS_CWD_SHIFT		0
+#define EASRC_CRCM_RS_CWD_WIDTH		32
+#define EASRC_CRCM_RS_CWD(v)		((v) << EASRC_CRCM_RS_CWD_SHIFT)
+
+/* ASRC Context Resampling Coefficient Control (CRCC) */
+#define EASRC_CRCC_RS_CA_SHIFT		16
+#define EASRC_CRCC_RS_CA_WIDTH		11
+#define EASRC_CRCC_RS_CA_MASK		((BIT(EASRC_CRCC_RS_CA_WIDTH) - 1) \
+					 << EASRC_CRCC_RS_CA_SHIFT)
+#define EASRC_CRCC_RS_CA(v)		(((v) << EASRC_CRCC_RS_CA_SHIFT) \
+					 & EASRC_CRCC_RS_CA_MASK)
+#define EASRC_CRCC_RS_TAPS_SHIFT	1
+#define EASRC_CRCC_RS_TAPS_WIDTH	2
+#define EASRC_CRCC_RS_TAPS_MASK		((BIT(EASRC_CRCC_RS_TAPS_WIDTH) - 1) \
+					 << EASRC_CRCC_RS_TAPS_SHIFT)
+#define EASRC_CRCC_RS_TAPS(v)		(((v) << EASRC_CRCC_RS_TAPS_SHIFT) \
+					 & EASRC_CRCC_RS_TAPS_MASK)
+#define EASRC_CRCC_RS_CPR_SHIFT		0
+#define EASRC_CRCC_RS_CPR_MASK		BIT(EASRC_CRCC_RS_CPR_SHIFT)
+#define EASRC_CRCC_RS_CPR		BIT(EASRC_CRCC_RS_CPR_SHIFT)
+
+/* ASRC Interrupt_Control (IC) */
+#define EASRC_IRQC_RSDM_SHIFT		8
+#define EASRC_IRQC_RSDM_WIDTH		4
+#define EASRC_IRQC_RSDM_MASK		((BIT(EASRC_IRQC_RSDM_WIDTH) - 1) \
+					 << EASRC_IRQC_RSDM_SHIFT)
+#define EASRC_IRQC_RSDM(v)		(((v) << EASRC_IRQC_RSDM_SHIFT) \
+					 & EASRC_IRQC_RSDM_MASK)
+#define EASRC_IRQC_OERM_SHIFT		4
+#define EASRC_IRQC_OERM_WIDTH		4
+#define EASRC_IRQC_OERM_MASK		((BIT(EASRC_IRQC_OERM_WIDTH) - 1) \
+					 << EASRC_IRQC_OERM_SHIFT)
+#define EASRC_IRQC_OERM(v)		(((v) << EASRC_IRQC_OERM_SHIFT) \
+					 & EASRC_IEQC_OERM_MASK)
+#define EASRC_IRQC_IOM_SHIFT		0
+#define EASRC_IRQC_IOM_WIDTH		4
+#define EASRC_IRQC_IOM_MASK		((BIT(EASRC_IRQC_IOM_WIDTH) - 1) \
+					 << EASRC_IRQC_IOM_SHIFT)
+#define EASRC_IRQC_IOM(v)		(((v) << EASRC_IRQC_IOM_SHIFT) \
+					 & EASRC_IRQC_IOM_MASK)
+
+/* ASRC Interrupt Status Flags (ISF) */
+#define EASRC_IRQF_RSD_SHIFT		8
+#define EASRC_IRQF_RSD_WIDTH		4
+#define EASRC_IRQF_RSD_MASK		((BIT(EASRC_IRQF_RSD_WIDTH) - 1) \
+					 << EASRC_IRQF_RSD_SHIFT)
+#define EASRC_IRQF_RSD(v)		(((v) << EASRC_IRQF_RSD_SHIFT) \
+					 & EASRC_IRQF_RSD_MASK)
+#define EASRC_IRQF_OER_SHIFT		4
+#define EASRC_IRQF_OER_WIDTH		4
+#define EASRC_IRQF_OER_MASK		((BIT(EASRC_IRQF_OER_WIDTH) - 1) \
+					 << EASRC_IRQF_OER_SHIFT)
+#define EASRC_IRQF_OER(v)		(((v) << EASRC_IRQF_OER_SHIFT) \
+					 & EASRC_IRQF_OER_MASK)
+#define EASRC_IRQF_IFO_SHIFT		0
+#define EASRC_IRQF_IFO_WIDTH		4
+#define EASRC_IRQF_IFO_MASK		((BIT(EASRC_IRQF_IFO_WIDTH) - 1) \
+					 << EASRC_IRQF_IFO_SHIFT)
+#define EASRC_IRQF_IFO(v)		(((v) << EASRC_IRQF_IFO_SHIFT) \
+					 & EASRC_IRQF_IFO_MASK)
+
+/* ASRC Context Channel STAT */
+#define EASRC_CSx_CSx_SHIFT		0
+#define EASRC_CSx_CSx_WIDTH		32
+#define EASRC_CSx_CSx(v)		((v) << EASRC_CSx_CSx_SHIFT)
+
+/* ASRC Debug Control Register */
+#define EASRC_DBGC_DMS_SHIFT		0
+#define EASRC_DBGC_DMS_WIDTH		6
+#define EASRC_DBGC_DMS_MASK		((BIT(EASRC_DBGC_DMS_WIDTH) - 1) \
+					 << EASRC_DBGC_DMS_SHIFT)
+#define EASRC_DBGC_DMS(v)		(((v) << EASRC_DBGC_DMS_SHIFT) \
+					 & EASRC_DBGC_DMS_MASK)
+
+/* ASRC Debug Status Register */
+#define EASRC_DBGS_DS_SHIFT		0
+#define EASRC_DBGS_DS_WIDTH		32
+#define EASRC_DBGS_DS(v)		((v) << EASRC_DBGS_DS_SHIFT)
+
+/* General Constants */
+#define EASRC_CTX_MAX_NUM		4
+#define EASRC_RS_COEFF_MEM		0
+#define EASRC_PF_COEFF_MEM		1
+
+/* Prefilter constants */
+#define EASRC_PF_ST1_ONLY		0
+#define EASRC_PF_TWO_STAGE_MODE		1
+#define EASRC_PF_ST1_COEFF_WR		0
+#define EASRC_PF_ST2_COEFF_WR		1
+#define EASRC_MAX_PF_TAPS		384
+
+/* Resampling constants */
+#define EASRC_RS_32_TAPS		0
+#define EASRC_RS_64_TAPS		1
+#define EASRC_RS_128_TAPS		2
+
+/* Initialization mode */
+#define EASRC_INIT_MODE_SW_CONTROL	0
+#define EASRC_INIT_MODE_REPLICATE	1
+#define EASRC_INIT_MODE_ZERO_FILL	2
+
+/* FIFO watermarks */
+#define FSL_EASRC_INPUTFIFO_WML		0x4
+#define FSL_EASRC_OUTPUTFIFO_WML	0x1
+
+#define EASRC_INPUTFIFO_THRESHOLD_MIN	0
+#define EASRC_INPUTFIFO_THRESHOLD_MAX	127
+#define EASRC_OUTPUTFIFO_THRESHOLD_MIN	0
+#define EASRC_OUTPUTFIFO_THRESHOLD_MAX	63
+
+#define EASRC_DMA_BUFFER_SIZE		(1024 * 48 * 9)
+#define EASRC_MAX_BUFFER_SIZE		(1024 * 48)
+
+#define FIRMWARE_MAGIC			0xDEAD
+#define FIRMWARE_VERSION		1
+
+#define PREFILTER_MEM_LEN		0x1800
+
+enum easrc_word_width {
+	EASRC_WIDTH_16_BIT = 0,
+	EASRC_WIDTH_20_BIT = 1,
+	EASRC_WIDTH_24_BIT = 2,
+	EASRC_WIDTH_32_BIT = 3,
+};
+
+struct __attribute__((__packed__))  asrc_firmware_hdr {
+	u32 magic;
+	u32 interp_scen;
+	u32 prefil_scen;
+	u32 firmware_version;
+};
+
+struct __attribute__((__packed__)) interp_params {
+	u32 magic;
+	u32 num_taps;
+	u32 num_phases;
+	u64 center_tap;
+	u64 coeff[8192];
+};
+
+struct __attribute__((__packed__)) prefil_params {
+	u32 magic;
+	u32 insr;
+	u32 outsr;
+	u32 st1_taps;
+	u32 st2_taps;
+	u32 st1_exp;
+	u64 coeff[256];
+};
+
+struct dma_block {
+	void *dma_vaddr;
+	unsigned int length;
+	unsigned int max_buf_size;
+};
+
+struct fsl_easrc_data_fmt {
+	unsigned int width : 2;
+	unsigned int endianness : 1;
+	unsigned int unsign : 1;
+	unsigned int floating_point : 1;
+	unsigned int iec958: 1;
+	unsigned int sample_pos: 5;
+	unsigned int addexp;
+};
+
+struct fsl_easrc_io_params {
+	struct fsl_easrc_data_fmt fmt;
+	unsigned int group_len;
+	unsigned int iterations;
+	unsigned int access_len;
+	unsigned int fifo_wtmk;
+	unsigned int sample_rate;
+	unsigned int sample_format;
+	unsigned int norm_rate;
+};
+
+struct fsl_easrc_slot {
+	bool busy;
+	int ctx_index;
+	int slot_index;
+	int num_channel;  /* maximum is 8 */
+	int min_channel;
+	int max_channel;
+	int pf_mem_used;
+};
+
+/**
+ * fsl_easrc_ctx_priv: EASRC context private data
+ *
+ * @in_params: input parameter
+ * @out_params:  output parameter
+ * @st1_num_taps: tap number of stage 1
+ * @st2_num_taps: tap number of stage 2
+ * @st1_num_exp: exponent number of stage 1
+ * @pf_init_mode: prefilter init mode
+ * @rs_init_mode:  resample filter init mode
+ * @ctx_streams: stream flag of ctx
+ * @rs_ratio: resampler ratio
+ * @st1_coeff: pointer of stage 1 coeff
+ * @st2_coeff: pointer of stage 2 coeff
+ * @in_filled_sample: input filled sample
+ * @out_missed_sample: sample missed in output
+ * @st1_addexp: exponent added for stage1
+ * @st2_addexp: exponent added for stage2
+ */
+struct fsl_easrc_ctx_priv {
+	struct fsl_easrc_io_params in_params;
+	struct fsl_easrc_io_params out_params;
+	unsigned int st1_num_taps;
+	unsigned int st2_num_taps;
+	unsigned int st1_num_exp;
+	unsigned int pf_init_mode;
+	unsigned int rs_init_mode;
+	unsigned int ctx_streams;
+	u64 rs_ratio;
+	u64 *st1_coeff;
+	u64 *st2_coeff;
+	int in_filled_sample;
+	int out_missed_sample;
+	int st1_addexp;
+	int st2_addexp;
+};
+
+/**
+ * fsl_easrc_priv: EASRC private data
+ *
+ * @slot: slot setting
+ * @firmware_hdr:  the header of firmware
+ * @interp: pointer to interpolation filter coeff
+ * @prefil: pointer to prefilter coeff
+ * @fw: firmware of coeff table
+ * @fw_name: firmware name
+ * @rs_num_taps:  resample filter taps, 32, 64, or 128
+ * @bps_iec958: bits per sample of iec958
+ * @rs_coeff: resampler coefficient
+ * @const_coeff: one tap prefilter coefficient
+ * @firmware_loaded: firmware is loaded
+ */
+struct fsl_easrc_priv {
+	struct fsl_easrc_slot slot[EASRC_CTX_MAX_NUM][2];
+	struct asrc_firmware_hdr *firmware_hdr;
+	struct interp_params *interp;
+	struct prefil_params *prefil;
+	const struct firmware *fw;
+	const char *fw_name;
+	unsigned int rs_num_taps;
+	unsigned int bps_iec958[EASRC_CTX_MAX_NUM];
+	u64 *rs_coeff;
+	u64 const_coeff;
+	int firmware_loaded;
+};
+#endif /* _FSL_EASRC_H */
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index c7a49d03463a..84290be778f0 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -87,6 +87,10 @@ static irqreturn_t esai_isr(int irq, void *devid)
 	if ((saisr & (ESAI_SAISR_TUE | ESAI_SAISR_ROE)) &&
 	    esai_priv->reset_at_xrun) {
 		dev_dbg(&pdev->dev, "reset module for xrun\n");
+		regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR,
+				   ESAI_xCR_xEIE_MASK, 0);
+		regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR,
+				   ESAI_xCR_xEIE_MASK, 0);
 		tasklet_schedule(&esai_priv->task);
 	}
 
diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index f7f2d29f1bfe..e73bd6570a08 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -702,10 +702,8 @@ static int fsl_micfil_probe(struct platform_device *pdev)
 	for (i = 0; i < MICFIL_IRQ_LINES; i++) {
 		micfil->irq[i] = platform_get_irq(pdev, i);
 		dev_err(&pdev->dev, "GET IRQ: %d\n", micfil->irq[i]);
-		if (micfil->irq[i] < 0) {
-			dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
+		if (micfil->irq[i] < 0)
 			return micfil->irq[i];
-		}
 	}
 
 	if (of_property_read_bool(np, "fsl,shared-interrupt"))
diff --git a/sound/soc/hisilicon/hi6210-i2s.c b/sound/soc/hisilicon/hi6210-i2s.c
index ab3b76d298b3..fd5dcd6b9f85 100644
--- a/sound/soc/hisilicon/hi6210-i2s.c
+++ b/sound/soc/hisilicon/hi6210-i2s.c
@@ -547,7 +547,7 @@ static int hi6210_i2s_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret;
 
-	i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
+	i2s = devm_kzalloc(dev, sizeof(*i2s), GFP_KERNEL);
 	if (!i2s)
 		return -ENOMEM;
 
@@ -562,28 +562,28 @@ static int hi6210_i2s_probe(struct platform_device *pdev)
 	i2s->base_phys = (phys_addr_t)res->start;
 	i2s->dai = hi6210_i2s_dai_init;
 
-	dev_set_drvdata(&pdev->dev, i2s);
+	dev_set_drvdata(dev, i2s);
 
 	i2s->sysctrl = syscon_regmap_lookup_by_phandle(node,
 						"hisilicon,sysctrl-syscon");
 	if (IS_ERR(i2s->sysctrl))
 		return PTR_ERR(i2s->sysctrl);
 
-	i2s->clk[CLK_DACODEC] = devm_clk_get(&pdev->dev, "dacodec");
-	if (IS_ERR_OR_NULL(i2s->clk[CLK_DACODEC]))
+	i2s->clk[CLK_DACODEC] = devm_clk_get(dev, "dacodec");
+	if (IS_ERR(i2s->clk[CLK_DACODEC]))
 		return PTR_ERR(i2s->clk[CLK_DACODEC]);
 	i2s->clocks++;
 
-	i2s->clk[CLK_I2S_BASE] = devm_clk_get(&pdev->dev, "i2s-base");
-	if (IS_ERR_OR_NULL(i2s->clk[CLK_I2S_BASE]))
+	i2s->clk[CLK_I2S_BASE] = devm_clk_get(dev, "i2s-base");
+	if (IS_ERR(i2s->clk[CLK_I2S_BASE]))
 		return PTR_ERR(i2s->clk[CLK_I2S_BASE]);
 	i2s->clocks++;
 
-	ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
+	ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0);
 	if (ret)
 		return ret;
 
-	ret = devm_snd_soc_register_component(&pdev->dev, &hi6210_i2s_i2s_comp,
+	ret = devm_snd_soc_register_component(dev, &hi6210_i2s_i2s_comp,
 					 &i2s->dai, 1);
 	return ret;
 }
diff --git a/sound/soc/intel/atom/sst-atom-controls.h b/sound/soc/intel/atom/sst-atom-controls.h
index 5356e954a732..620b48d2a064 100644
--- a/sound/soc/intel/atom/sst-atom-controls.h
+++ b/sound/soc/intel/atom/sst-atom-controls.h
@@ -410,7 +410,7 @@ struct sst_cmd_set_gain_dual {
 struct sst_cmd_set_params {
 	struct sst_destination_id dst;
 	u16 command_id;
-	char params[0];
+	char params[];
 } __packed;
 
 
diff --git a/sound/soc/intel/atom/sst-mfld-platform-compress.c b/sound/soc/intel/atom/sst-mfld-platform-compress.c
index 4a7a9426a3b9..1595e01a7e12 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-compress.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-compress.c
@@ -39,7 +39,8 @@ static void sst_drain_notify(void *arg)
 		snd_compr_drain_notify(cstream);
 }
 
-static int sst_platform_compr_open(struct snd_compr_stream *cstream)
+static int sst_platform_compr_open(struct snd_soc_component *component,
+				   struct snd_compr_stream *cstream)
 {
 
 	int ret_val = 0;
@@ -72,7 +73,8 @@ static int sst_platform_compr_open(struct snd_compr_stream *cstream)
 	return ret_val;
 }
 
-static int sst_platform_compr_free(struct snd_compr_stream *cstream)
+static int sst_platform_compr_free(struct snd_soc_component *component,
+				   struct snd_compr_stream *cstream)
 {
 	struct sst_runtime_stream *stream;
 	int ret_val = 0, str_id;
@@ -91,15 +93,14 @@ static int sst_platform_compr_free(struct snd_compr_stream *cstream)
 	return 0;
 }
 
-static int sst_platform_compr_set_params(struct snd_compr_stream *cstream,
-					struct snd_compr_params *params)
+static int sst_platform_compr_set_params(struct snd_soc_component *component,
+					 struct snd_compr_stream *cstream,
+					 struct snd_compr_params *params)
 {
 	struct sst_runtime_stream *stream;
 	int retval;
 	struct snd_sst_params str_params;
 	struct sst_compress_cb cb;
-	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct sst_data *ctx = snd_soc_component_get_drvdata(component);
 
 	stream = cstream->runtime->private_data;
@@ -166,7 +167,8 @@ static int sst_platform_compr_set_params(struct snd_compr_stream *cstream,
 	return 0;
 }
 
-static int sst_platform_compr_trigger(struct snd_compr_stream *cstream, int cmd)
+static int sst_platform_compr_trigger(struct snd_soc_component *component,
+				      struct snd_compr_stream *cstream, int cmd)
 {
 	struct sst_runtime_stream *stream = cstream->runtime->private_data;
 
@@ -199,8 +201,9 @@ static int sst_platform_compr_trigger(struct snd_compr_stream *cstream, int cmd)
 	return -EINVAL;
 }
 
-static int sst_platform_compr_pointer(struct snd_compr_stream *cstream,
-					struct snd_compr_tstamp *tstamp)
+static int sst_platform_compr_pointer(struct snd_soc_component *component,
+				      struct snd_compr_stream *cstream,
+				      struct snd_compr_tstamp *tstamp)
 {
 	struct sst_runtime_stream *stream;
 
@@ -212,8 +215,9 @@ static int sst_platform_compr_pointer(struct snd_compr_stream *cstream,
 	return 0;
 }
 
-static int sst_platform_compr_ack(struct snd_compr_stream *cstream,
-					size_t bytes)
+static int sst_platform_compr_ack(struct snd_soc_component *component,
+				  struct snd_compr_stream *cstream,
+				  size_t bytes)
 {
 	struct sst_runtime_stream *stream;
 
@@ -224,8 +228,9 @@ static int sst_platform_compr_ack(struct snd_compr_stream *cstream,
 	return 0;
 }
 
-static int sst_platform_compr_get_caps(struct snd_compr_stream *cstream,
-					struct snd_compr_caps *caps)
+static int sst_platform_compr_get_caps(struct snd_soc_component *component,
+				       struct snd_compr_stream *cstream,
+				       struct snd_compr_caps *caps)
 {
 	struct sst_runtime_stream *stream =
 		cstream->runtime->private_data;
@@ -233,8 +238,9 @@ static int sst_platform_compr_get_caps(struct snd_compr_stream *cstream,
 	return stream->compr_ops->get_caps(caps);
 }
 
-static int sst_platform_compr_get_codec_caps(struct snd_compr_stream *cstream,
-					struct snd_compr_codec_caps *codec)
+static int sst_platform_compr_get_codec_caps(struct snd_soc_component *component,
+					     struct snd_compr_stream *cstream,
+					     struct snd_compr_codec_caps *codec)
 {
 	struct sst_runtime_stream *stream =
 		cstream->runtime->private_data;
@@ -242,8 +248,9 @@ static int sst_platform_compr_get_codec_caps(struct snd_compr_stream *cstream,
 	return stream->compr_ops->get_codec_caps(codec);
 }
 
-static int sst_platform_compr_set_metadata(struct snd_compr_stream *cstream,
-					struct snd_compr_metadata *metadata)
+static int sst_platform_compr_set_metadata(struct snd_soc_component *component,
+					   struct snd_compr_stream *cstream,
+					   struct snd_compr_metadata *metadata)
 {
 	struct sst_runtime_stream *stream  =
 		 cstream->runtime->private_data;
@@ -251,7 +258,7 @@ static int sst_platform_compr_set_metadata(struct snd_compr_stream *cstream,
 	return stream->compr_ops->set_metadata(sst->dev, stream->id, metadata);
 }
 
-const struct snd_compr_ops sst_platform_compr_ops = {
+const struct snd_compress_ops sst_platform_compress_ops = {
 
 	.open = sst_platform_compr_open,
 	.free = sst_platform_compr_free,
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
index 82f2b6357778..2e9222ed9daa 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -684,7 +684,7 @@ static const struct snd_soc_component_driver sst_soc_platform_drv  = {
 	.open		= sst_soc_open,
 	.trigger	= sst_soc_trigger,
 	.pointer	= sst_soc_pointer,
-	.compr_ops	= &sst_platform_compr_ops,
+	.compress_ops	= &sst_platform_compress_ops,
 	.pcm_construct	= sst_soc_pcm_new,
 };
 
diff --git a/sound/soc/intel/atom/sst-mfld-platform.h b/sound/soc/intel/atom/sst-mfld-platform.h
index fe4749cfa4f5..10c9ecfa7038 100644
--- a/sound/soc/intel/atom/sst-mfld-platform.h
+++ b/sound/soc/intel/atom/sst-mfld-platform.h
@@ -17,7 +17,7 @@
 #include "sst-atom-controls.h"
 
 extern struct sst_device *sst;
-extern const struct snd_compr_ops sst_platform_compr_ops;
+extern const struct snd_compress_ops sst_platform_compress_ops;
 
 #define DRV_NAME "sst"
 
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 556c3104e641..3ee7c006a860 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -243,7 +243,7 @@ if SND_SOC_INTEL_SKL
 
 config SND_SOC_INTEL_SKL_RT286_MACH
 	tristate "SKL with RT286 I2S mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT286
 	select SND_SOC_DMIC
@@ -256,7 +256,7 @@ config SND_SOC_INTEL_SKL_RT286_MACH
 
 config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
 	tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_NAU8825
 	select SND_SOC_SSM4567
@@ -270,7 +270,7 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
 
 config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
 	tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_NAU8825
 	select SND_SOC_MAX98357A
@@ -299,7 +299,7 @@ if SND_SOC_INTEL_APL
 
 config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
 	tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
@@ -311,7 +311,7 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
 
 config SND_SOC_INTEL_BXT_RT298_MACH
 	tristate "Broxton with RT298 I2S mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT298
 	select SND_SOC_DMIC
@@ -328,7 +328,7 @@ if SND_SOC_INTEL_KBL
 
 config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
 	tristate "KBL with RT5663 and MAX98927 in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT5663
 	select SND_SOC_MAX98927
@@ -370,7 +370,7 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
 
 config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
 	tristate "KBL with DA7219 and MAX98927 in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_DA7219
 	select SND_SOC_MAX98927
@@ -400,7 +400,7 @@ if SND_SOC_SOF_GEMINILAKE  && SND_SOC_SOF_HDA_LINK
 
 config SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH
 	tristate "GLK with DA7219 and MAX98357A in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
@@ -412,7 +412,7 @@ config SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH
 
 config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
 	tristate "GLK with RT5682 and MAX98357A in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_RT5682
@@ -432,6 +432,7 @@ if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC
 config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH
 	tristate "SKL/KBL/BXT/APL with HDA Codecs"
 	depends on SND_HDA_CODEC_HDMI
+	depends on GPIOLIB
 	select SND_SOC_HDAC_HDMI
 	select SND_SOC_DMIC
 	# SND_SOC_HDAC_HDA is already selected
@@ -446,7 +447,7 @@ endif ## SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC
 if SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL
 config SND_SOC_INTEL_SOF_RT5682_MACH
 	tristate "SOF with rt5682 codec in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on (SND_SOC_SOF_HDA_LINK && (MFD_INTEL_LPSS || COMPILE_TEST)) ||\
 		   (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
 	depends on SND_HDA_CODEC_HDMI
@@ -480,7 +481,7 @@ if (SND_SOC_SOF_COMETLAKE_LP && SND_SOC_SOF_HDA_LINK)
 
 config SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH
 	tristate "CML_LP with DA7219 and MAX98357A in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
 	help
@@ -491,7 +492,7 @@ config SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH
 
 config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH
 	tristate "CML with RT1011 and RT5682 in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_RT1011
@@ -510,7 +511,7 @@ if SND_SOC_SOF_JASPERLAKE
 
 config SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH
 	tristate "SOF with DA7219 and MAX98373/MAX98360A in I2S Mode"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	depends on SND_HDA_CODEC_HDMI
 	select SND_SOC_DA7219
@@ -524,11 +525,26 @@ config SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH
 
 endif ## SND_SOC_SOF_JASPERLAKE
 
+if SND_SOC_SOF_ELKHARTLAKE
+
+config SND_SOC_INTEL_EHL_RT5660_MACH
+	tristate "EHL with RT5660 in I2S mode"
+	depends on I2C && ACPI && GPIOLIB
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI
+	select SND_SOC_RT5660
+	select SND_SOC_DMIC
+	help
+	  This adds support for ASoC machine driver for Elkhart Lake
+	  platform with RT5660 I2S audio codec.
+
+endif ## SND_SOC_SOF_ELKHARTLAKE
+
 if SND_SOC_SOF_INTEL_SOUNDWIRE
 
 config SND_SOC_INTEL_SOUNDWIRE_SOF_MACH
 	tristate "SoundWire generic machine driver"
-	depends on I2C && ACPI
+	depends on I2C && ACPI && GPIOLIB
 	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	depends on SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES || COMPILE_TEST
 	depends on SOUNDWIRE
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index 1ef6e60bc2a0..98bf42463a1b 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -31,6 +31,7 @@ snd-soc-skl_hda_dsp-objs := skl_hda_dsp_generic.o skl_hda_dsp_common.o hda_dsp_c
 snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o
 snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o
 snd-soc-sof_da7219_max98373-objs := sof_da7219_max98373.o hda_dsp_common.o
+snd-soc-ehl-rt5660-objs := ehl_rt5660.o hda_dsp_common.o
 snd-soc-sof-sdw-objs += sof_sdw.o				\
 			sof_sdw_rt711.o sof_sdw_rt700.o		\
 			sof_sdw_rt1308.o sof_sdw_rt715.o	\
@@ -68,4 +69,5 @@ obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max9
 obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o
 obj-$(CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH) += snd-soc-skl_hda_dsp.o
 obj-$(CONFIG_SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH) += snd-soc-sof_da7219_max98373.o
+obj-$(CONFIG_SND_SOC_INTEL_EHL_RT5660_MACH) += snd-soc-ehl-rt5660.o
 obj-$(CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH) += snd-soc-sof-sdw.o
diff --git a/sound/soc/intel/boards/bdw-rt5650.c b/sound/soc/intel/boards/bdw-rt5650.c
index af2f50293208..a97e912adf4b 100644
--- a/sound/soc/intel/boards/bdw-rt5650.c
+++ b/sound/soc/intel/boards/bdw-rt5650.c
@@ -162,6 +162,34 @@ static int bdw_rt5650_rtd_init(struct snd_soc_pcm_runtime *rtd)
 }
 #endif
 
+static const unsigned int channels[] = {
+	2, 4,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_channels = {
+	.count = ARRAY_SIZE(channels),
+	.list = channels,
+	.mask = 0,
+};
+
+static int bdw_rt5650_fe_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	/* Board supports stereo and quad configurations for capture */
+	if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
+		return 0;
+
+	runtime->hw.channels_max = 4;
+	return snd_pcm_hw_constraint_list(runtime, 0,
+					  SNDRV_PCM_HW_PARAM_CHANNELS,
+					  &constraints_channels);
+}
+
+static const struct snd_soc_ops bdw_rt5650_fe_ops = {
+	.startup = bdw_rt5650_fe_startup,
+};
+
 static int bdw_rt5650_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct bdw_rt5650_priv *bdw_rt5650 =
@@ -234,6 +262,7 @@ static struct snd_soc_dai_link bdw_rt5650_dais[] = {
 		.name = "System PCM",
 		.stream_name = "System Playback",
 		.dynamic = 1,
+		.ops = &bdw_rt5650_fe_ops,
 #if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 		.init = bdw_rt5650_rtd_init,
 #endif
diff --git a/sound/soc/intel/boards/bdw-rt5677.c b/sound/soc/intel/boards/bdw-rt5677.c
index cc41a348295e..5f96d7ac0a22 100644
--- a/sound/soc/intel/boards/bdw-rt5677.c
+++ b/sound/soc/intel/boards/bdw-rt5677.c
@@ -222,6 +222,31 @@ static int bdw_rt5677_rtd_init(struct snd_soc_pcm_runtime *rtd)
 }
 #endif
 
+static const unsigned int channels[] = {
+	2,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_channels = {
+	.count = ARRAY_SIZE(channels),
+	.list = channels,
+	.mask = 0,
+};
+
+static int bdw_rt5677_fe_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	/* Board supports stereo configuration only */
+	runtime->hw.channels_max = 2;
+	return snd_pcm_hw_constraint_list(runtime, 0,
+					  SNDRV_PCM_HW_PARAM_CHANNELS,
+					  &constraints_channels);
+}
+
+static const struct snd_soc_ops bdw_rt5677_fe_ops = {
+	.startup = bdw_rt5677_fe_startup,
+};
+
 static int bdw_rt5677_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct bdw_rt5677_priv *bdw_rt5677 =
@@ -321,6 +346,7 @@ static struct snd_soc_dai_link bdw_rt5677_dais[] = {
 		},
 		.dpcm_capture = 1,
 		.dpcm_playback = 1,
+		.ops = &bdw_rt5677_fe_ops,
 		SND_SOC_DAILINK_REG(fe, dummy, platform),
 	},
 
diff --git a/sound/soc/intel/boards/broadwell.c b/sound/soc/intel/boards/broadwell.c
index f9a8336a0541..07b2cfdadaeb 100644
--- a/sound/soc/intel/boards/broadwell.c
+++ b/sound/soc/intel/boards/broadwell.c
@@ -143,6 +143,31 @@ static int broadwell_rtd_init(struct snd_soc_pcm_runtime *rtd)
 }
 #endif
 
+static const unsigned int channels[] = {
+	2,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_channels = {
+	.count = ARRAY_SIZE(channels),
+	.list = channels,
+	.mask = 0,
+};
+
+static int broadwell_fe_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	/* Board supports stereo configuration only */
+	runtime->hw.channels_max = 2;
+	return snd_pcm_hw_constraint_list(runtime, 0,
+					  SNDRV_PCM_HW_PARAM_CHANNELS,
+					  &constraints_channels);
+}
+
+static const struct snd_soc_ops broadwell_fe_ops = {
+	.startup = broadwell_fe_startup,
+};
+
 SND_SOC_DAILINK_DEF(system,
 	DAILINK_COMP_ARRAY(COMP_CPU("System Pin")));
 
@@ -180,6 +205,7 @@ static struct snd_soc_dai_link broadwell_rt286_dais[] = {
 		.init = broadwell_rtd_init,
 #endif
 		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.ops = &broadwell_fe_ops,
 		.dpcm_playback = 1,
 		.dpcm_capture = 1,
 		SND_SOC_DAILINK_REG(system, dummy, platform),
diff --git a/sound/soc/intel/boards/cml_rt1011_rt5682.c b/sound/soc/intel/boards/cml_rt1011_rt5682.c
index 8167b2977e1d..da6fefaf6785 100644
--- a/sound/soc/intel/boards/cml_rt1011_rt5682.c
+++ b/sound/soc/intel/boards/cml_rt1011_rt5682.c
@@ -30,6 +30,36 @@
 #define CML_RT5682_CODEC_DAI "rt5682-aif1"
 #define NAME_SIZE 32
 
+#define SOF_RT1011_SPEAKER_WL		BIT(0)
+#define SOF_RT1011_SPEAKER_WR		BIT(1)
+#define SOF_RT1011_SPEAKER_TL		BIT(2)
+#define SOF_RT1011_SPEAKER_TR		BIT(3)
+#define SPK_CH 4
+
+/* Default: Woofer speakers  */
+static unsigned long sof_rt1011_quirk = SOF_RT1011_SPEAKER_WL |
+					SOF_RT1011_SPEAKER_WR;
+
+static int sof_rt1011_quirk_cb(const struct dmi_system_id *id)
+{
+	sof_rt1011_quirk = (unsigned long)id->driver_data;
+	return 1;
+}
+
+static const struct dmi_system_id sof_rt1011_quirk_table[] = {
+	{
+		.callback = sof_rt1011_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Helios"),
+	},
+		.driver_data = (void *)(SOF_RT1011_SPEAKER_WL | SOF_RT1011_SPEAKER_WR |
+					SOF_RT1011_SPEAKER_TL | SOF_RT1011_SPEAKER_TR),
+	},
+	{
+	}
+};
+
 static struct snd_soc_jack hdmi_jack[3];
 
 struct hdmi_pcm {
@@ -48,15 +78,16 @@ struct card_private {
 static const struct snd_kcontrol_new cml_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
-	SOC_DAPM_PIN_SWITCH("TL Ext Spk"),
-	SOC_DAPM_PIN_SWITCH("TR Ext Spk"),
 	SOC_DAPM_PIN_SWITCH("WL Ext Spk"),
 	SOC_DAPM_PIN_SWITCH("WR Ext Spk"),
 };
 
+static const struct snd_kcontrol_new cml_rt1011_tt_controls[] = {
+	SOC_DAPM_PIN_SWITCH("TL Ext Spk"),
+	SOC_DAPM_PIN_SWITCH("TR Ext Spk"),
+};
+
 static const struct snd_soc_dapm_widget cml_rt1011_rt5682_widgets[] = {
-	SND_SOC_DAPM_SPK("TL Ext Spk", NULL),
-	SND_SOC_DAPM_SPK("TR Ext Spk", NULL),
 	SND_SOC_DAPM_SPK("WL Ext Spk", NULL),
 	SND_SOC_DAPM_SPK("WR Ext Spk", NULL),
 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
@@ -64,10 +95,13 @@ static const struct snd_soc_dapm_widget cml_rt1011_rt5682_widgets[] = {
 	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
 };
 
+static const struct snd_soc_dapm_widget cml_rt1011_tt_widgets[] = {
+	SND_SOC_DAPM_SPK("TL Ext Spk", NULL),
+	SND_SOC_DAPM_SPK("TR Ext Spk", NULL),
+};
+
 static const struct snd_soc_dapm_route cml_rt1011_rt5682_map[] = {
-	/*speaker*/
-	{"TL Ext Spk", NULL, "TL SPO"},
-	{"TR Ext Spk", NULL, "TR SPO"},
+	/*WL/WR speaker*/
 	{"WL Ext Spk", NULL, "WL SPO"},
 	{"WR Ext Spk", NULL, "WR SPO"},
 
@@ -82,6 +116,12 @@ static const struct snd_soc_dapm_route cml_rt1011_rt5682_map[] = {
 	{"DMic", NULL, "SoC DMIC"},
 };
 
+static const struct snd_soc_dapm_route cml_rt1011_tt_map[] = {
+	/*TL/TR speaker*/
+	{"TL Ext Spk", NULL, "TL SPO" },
+	{"TR Ext Spk", NULL, "TR SPO" },
+};
+
 static int cml_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
@@ -121,6 +161,35 @@ static int cml_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
 	return ret;
 };
 
+static int cml_rt1011_spk_init(struct snd_soc_pcm_runtime *rtd)
+{
+	int ret = 0;
+	struct snd_soc_card *card = rtd->card;
+
+	if (sof_rt1011_quirk & (SOF_RT1011_SPEAKER_TL |
+				SOF_RT1011_SPEAKER_TR)) {
+
+		ret = snd_soc_add_card_controls(card, cml_rt1011_tt_controls,
+					ARRAY_SIZE(cml_rt1011_tt_controls));
+		if (ret)
+			return ret;
+
+		ret = snd_soc_dapm_new_controls(&card->dapm,
+					cml_rt1011_tt_widgets,
+					ARRAY_SIZE(cml_rt1011_tt_widgets));
+		if (ret)
+			return ret;
+
+		ret = snd_soc_dapm_add_routes(&card->dapm, cml_rt1011_tt_map,
+					ARRAY_SIZE(cml_rt1011_tt_map));
+
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
 static int cml_rt5682_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
@@ -191,30 +260,38 @@ static int cml_rt1011_hw_params(struct snd_pcm_substream *substream,
 		 * The feedback is captured for each codec individually.
 		 * Hence all 4 codecs use 1 Tx slot each for feedback.
 		 */
-		if (!strcmp(codec_dai->component->name, "i2c-10EC1011:00")) {
-			ret = snd_soc_dai_set_tdm_slot(codec_dai,
-						       0x4, 0x1, 4, 24);
-			if (ret < 0)
-				break;
-		}
-		if (!strcmp(codec_dai->component->name, "i2c-10EC1011:02")) {
-			ret = snd_soc_dai_set_tdm_slot(codec_dai,
-						       0x1, 0x1, 4, 24);
-			if (ret < 0)
-				break;
+		if (sof_rt1011_quirk & (SOF_RT1011_SPEAKER_WL |
+					SOF_RT1011_SPEAKER_WR)) {
+			if (!strcmp(codec_dai->component->name, "i2c-10EC1011:00")) {
+				ret = snd_soc_dai_set_tdm_slot(codec_dai,
+							       0x4, 0x1, 4, 24);
+				if (ret < 0)
+					break;
+			}
+
+			if (!strcmp(codec_dai->component->name, "i2c-10EC1011:01")) {
+				ret = snd_soc_dai_set_tdm_slot(codec_dai,
+							       0x8, 0x2, 4, 24);
+				if (ret < 0)
+					break;
+			}
 		}
-		/* TDM Rx slot 2 is used for Right Woofer & Tweeters pair */
-		if (!strcmp(codec_dai->component->name, "i2c-10EC1011:01")) {
-			ret = snd_soc_dai_set_tdm_slot(codec_dai,
-						       0x8, 0x2, 4, 24);
-			if (ret < 0)
-				break;
-		}
-		if (!strcmp(codec_dai->component->name, "i2c-10EC1011:03")) {
-			ret = snd_soc_dai_set_tdm_slot(codec_dai,
-						       0x2, 0x2, 4, 24);
-			if (ret < 0)
-				break;
+
+		if (sof_rt1011_quirk & (SOF_RT1011_SPEAKER_TL |
+					SOF_RT1011_SPEAKER_TR)) {
+			if (!strcmp(codec_dai->component->name, "i2c-10EC1011:02")) {
+				ret = snd_soc_dai_set_tdm_slot(codec_dai,
+							       0x1, 0x1, 4, 24);
+				if (ret < 0)
+					break;
+			}
+
+			if (!strcmp(codec_dai->component->name, "i2c-10EC1011:03")) {
+				ret = snd_soc_dai_set_tdm_slot(codec_dai,
+							       0x2, 0x2, 4, 24);
+				if (ret < 0)
+					break;
+			}
 		}
 	}
 	if (ret < 0)
@@ -302,9 +379,7 @@ SND_SOC_DAILINK_DEF(ssp1_pin,
 SND_SOC_DAILINK_DEF(ssp1_codec,
 	DAILINK_COMP_ARRAY(
 	/* WL */ COMP_CODEC("i2c-10EC1011:00", CML_RT1011_CODEC_DAI),
-	/* WR */ COMP_CODEC("i2c-10EC1011:01", CML_RT1011_CODEC_DAI),
-	/* TL */ COMP_CODEC("i2c-10EC1011:02", CML_RT1011_CODEC_DAI),
-	/* TR */ COMP_CODEC("i2c-10EC1011:03", CML_RT1011_CODEC_DAI)));
+	/* WR */ COMP_CODEC("i2c-10EC1011:01", CML_RT1011_CODEC_DAI)));
 
 SND_SOC_DAILINK_DEF(dmic_pin,
 	DAILINK_COMP_ARRAY(COMP_CPU("DMIC01 Pin")));
@@ -398,6 +473,7 @@ static struct snd_soc_dai_link cml_rt1011_rt5682_dailink[] = {
 		.dpcm_playback = 1,
 		.dpcm_capture = 1, /* Capture stream provides Feedback */
 		.no_pcm = 1,
+		.init = cml_rt1011_spk_init,
 		.ops = &cml_rt1011_ops,
 		SND_SOC_DAILINK_REG(ssp1_pin, ssp1_codec, platform),
 	},
@@ -412,14 +488,6 @@ static struct snd_soc_codec_conf rt1011_conf[] = {
 		.dlc = COMP_CODEC_CONF("i2c-10EC1011:01"),
 		.name_prefix = "WR",
 	},
-	{
-		.dlc = COMP_CODEC_CONF("i2c-10EC1011:02"),
-		.name_prefix = "TL",
-	},
-	{
-		.dlc = COMP_CODEC_CONF("i2c-10EC1011:03"),
-		.name_prefix = "TR",
-	},
 };
 
 /* Cometlake audio machine driver for RT1011 and RT5682 */
@@ -441,10 +509,12 @@ static struct snd_soc_card snd_soc_card_cml = {
 
 static int snd_cml_rt1011_probe(struct platform_device *pdev)
 {
+	struct snd_soc_dai_link_component *rt1011_dais_components;
+	struct snd_soc_codec_conf *rt1011_dais_confs;
 	struct card_private *ctx;
 	struct snd_soc_acpi_mach *mach;
 	const char *platform_name;
-	int ret;
+	int ret, i;
 
 	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
@@ -455,6 +525,73 @@ static int snd_cml_rt1011_probe(struct platform_device *pdev)
 	snd_soc_card_cml.dev = &pdev->dev;
 	platform_name = mach->mach_params.platform;
 
+	dmi_check_system(sof_rt1011_quirk_table);
+
+	dev_info(&pdev->dev, "sof_rt1011_quirk = %lx\n", sof_rt1011_quirk);
+
+	if (sof_rt1011_quirk & (SOF_RT1011_SPEAKER_TL |
+				SOF_RT1011_SPEAKER_TR)) {
+		rt1011_dais_confs = devm_kzalloc(&pdev->dev,
+					sizeof(struct snd_soc_codec_conf) *
+					SPK_CH, GFP_KERNEL);
+
+		if (!rt1011_dais_confs)
+			return -ENOMEM;
+
+		rt1011_dais_components = devm_kzalloc(&pdev->dev,
+					sizeof(struct snd_soc_dai_link_component) *
+					SPK_CH, GFP_KERNEL);
+
+		if (!rt1011_dais_components)
+			return -ENOMEM;
+
+		for (i = 0; i < SPK_CH; i++) {
+			rt1011_dais_confs[i].dlc.name = devm_kasprintf(&pdev->dev,
+								GFP_KERNEL,
+								"i2c-10EC1011:0%d",
+								i);
+
+			if (!rt1011_dais_confs[i].dlc.name)
+				return -ENOMEM;
+
+			switch (i) {
+			case 0:
+				rt1011_dais_confs[i].name_prefix = "WL";
+				break;
+			case 1:
+				rt1011_dais_confs[i].name_prefix = "WR";
+				break;
+			case 2:
+				rt1011_dais_confs[i].name_prefix = "TL";
+				break;
+			case 3:
+				rt1011_dais_confs[i].name_prefix = "TR";
+				break;
+			default:
+				return -EINVAL;
+			}
+			rt1011_dais_components[i].name = devm_kasprintf(&pdev->dev,
+								GFP_KERNEL,
+								"i2c-10EC1011:0%d",
+								i);
+			if (!rt1011_dais_components[i].name)
+				return -ENOMEM;
+
+			rt1011_dais_components[i].dai_name = CML_RT1011_CODEC_DAI;
+		}
+
+		snd_soc_card_cml.codec_conf = rt1011_dais_confs;
+		snd_soc_card_cml.num_configs = SPK_CH;
+
+		for (i = 0; i < ARRAY_SIZE(cml_rt1011_rt5682_dailink); i++) {
+			if (!strcmp(cml_rt1011_rt5682_dailink[i].codecs->dai_name,
+					CML_RT1011_CODEC_DAI)) {
+				cml_rt1011_rt5682_dailink[i].codecs = rt1011_dais_components;
+				cml_rt1011_rt5682_dailink[i].num_codecs = SPK_CH;
+			}
+		}
+	}
+
 	/* set platform name for each dailink */
 	ret = snd_soc_fixup_dai_links_platform_name(&snd_soc_card_cml,
 						    platform_name);
@@ -482,5 +619,6 @@ MODULE_DESCRIPTION("Cometlake Audio Machine driver - RT1011 and RT5682 in I2S mo
 MODULE_AUTHOR("Naveen Manohar <naveen.m@intel.com>");
 MODULE_AUTHOR("Sathya Prakash M R <sathya.prakash.m.r@intel.com>");
 MODULE_AUTHOR("Shuming Fan <shumingf@realtek.com>");
+MODULE_AUTHOR("Mac Chiang <mac.chiang@intel.com>");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:cml_rt1011_rt5682");
diff --git a/sound/soc/intel/boards/ehl_rt5660.c b/sound/soc/intel/boards/ehl_rt5660.c
new file mode 100644
index 000000000000..2e3244d5496b
--- /dev/null
+++ b/sound/soc/intel/boards/ehl_rt5660.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation
+
+/*
+ * ehl_rt5660 - ASOC Machine driver for Elkhart Lake platforms
+ * with rt5660 codec
+ */
+
+#include <linux/acpi.h>
+#include <sound/core.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gfp.h>
+#include <sound/jack.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+
+#include "hda_dsp_common.h"
+#include "../../codecs/rt5660.h"
+
+#define DUAL_CHANNEL 2
+#define HDMI_LINK_START 3
+#define HDMI_LINE_END 6
+#define NAME_SIZE	32
+#define IDISP_CODEC_MASK	0x4
+
+struct sof_card_private {
+	struct list_head hdmi_pcm_list;
+	bool idisp_codec;
+};
+
+static const struct snd_kcontrol_new rt5660_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Speaker"),
+	/* There are two MICBIAS in rt5660, each for one MIC */
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic2"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
+};
+
+static const struct snd_soc_dapm_widget rt5660_widgets[] = {
+	SND_SOC_DAPM_SPK("Speaker", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic2", NULL),
+	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
+};
+
+static const struct snd_soc_dapm_route rt5660_map[] = {
+	{"Speaker", NULL, "SPO"},
+
+	{"Headset Mic", NULL, "MICBIAS1"},
+	{"Headset Mic2", NULL, "MICBIAS2"},
+
+	{"IN1P", NULL, "Headset Mic"},
+	{"IN2P", NULL, "Headset Mic2"},
+
+	{"Line Out", NULL, "LOUTL"},
+	{"Line Out", NULL, "LOUTR"},
+
+	{"DMic", NULL, "SoC DMIC"},
+};
+
+struct sof_hdmi_pcm {
+	struct list_head head;
+	struct snd_soc_dai *codec_dai;
+	int device;
+};
+
+static int hdmi_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
+	struct sof_hdmi_pcm *pcm;
+
+	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
+	if (!pcm)
+		return -ENOMEM;
+
+	/* dai_link id is 1:1 mapped to the PCM device */
+	pcm->device = rtd->dai_link->id;
+	pcm->codec_dai = dai;
+
+	list_add_tail(&pcm->head, &ctx->hdmi_pcm_list);
+
+	return 0;
+}
+
+static int card_late_probe(struct snd_soc_card *card)
+{
+	struct sof_card_private *ctx = snd_soc_card_get_drvdata(card);
+	struct sof_hdmi_pcm *pcm;
+
+	if (list_empty(&ctx->hdmi_pcm_list))
+		return -ENOENT;
+
+	if (!ctx->idisp_codec)
+		return 0;
+
+	pcm = list_first_entry(&ctx->hdmi_pcm_list, struct sof_hdmi_pcm, head);
+
+	return hda_dsp_hdmi_build_controls(card, pcm->codec_dai->component);
+}
+
+static int rt5660_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai,
+				     RT5660_SCLK_S_PLL1,
+				     params_rate(params) * 512,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_pll(codec_dai, 0,
+				  RT5660_PLL1_S_BCLK,
+				  params_rate(params) * 50,
+				  params_rate(params) * 512);
+	if (ret < 0)
+		dev_err(codec_dai->dev, "can't set codec pll: %d\n", ret);
+
+	return ret;
+}
+
+static struct snd_soc_ops rt5660_ops = {
+	.hw_params = rt5660_hw_params,
+};
+
+SND_SOC_DAILINK_DEF(ssp0_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("SSP0 Pin")));
+
+SND_SOC_DAILINK_DEF(rt5660_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5660:00", "rt5660-aif1")));
+
+SND_SOC_DAILINK_DEF(platform,
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("0000:00:1f.3")));
+
+SND_SOC_DAILINK_DEF(dmic_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("DMIC01 Pin")));
+SND_SOC_DAILINK_DEF(dmic_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("dmic-codec", "dmic-hifi")));
+SND_SOC_DAILINK_DEF(dmic16k,
+	DAILINK_COMP_ARRAY(COMP_CPU("DMIC16k Pin")));
+
+SND_SOC_DAILINK_DEF(idisp1_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("iDisp1 Pin")));
+SND_SOC_DAILINK_DEF(idisp1_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("ehdaudio0D2", "intel-hdmi-hifi1")));
+
+SND_SOC_DAILINK_DEF(idisp2_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("iDisp2 Pin")));
+SND_SOC_DAILINK_DEF(idisp2_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("ehdaudio0D2", "intel-hdmi-hifi2")));
+
+SND_SOC_DAILINK_DEF(idisp3_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("iDisp3 Pin")));
+SND_SOC_DAILINK_DEF(idisp3_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("ehdaudio0D2", "intel-hdmi-hifi3")));
+
+SND_SOC_DAILINK_DEF(idisp4_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("iDisp4 Pin")));
+SND_SOC_DAILINK_DEF(idisp4_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("ehdaudio0D2", "intel-hdmi-hifi4")));
+
+static struct snd_soc_dai_link ehl_rt5660_dailink[] = {
+	/* back ends */
+	{
+		.name = "SSP0-Codec",
+		.id = 0,
+		.no_pcm = 1,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &rt5660_ops,
+		.nonatomic = true,
+		SND_SOC_DAILINK_REG(ssp0_pin, rt5660_codec, platform),
+	},
+	{
+		.name = "dmic48k",
+		.id = 1,
+		.ignore_suspend = 1,
+		.dpcm_capture = 1,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(dmic_pin, dmic_codec, platform),
+	},
+	{
+		.name = "dmic16k",
+		.id = 2,
+		.ignore_suspend = 1,
+		.dpcm_capture = 1,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(dmic16k, dmic_codec, platform),
+	},
+	{
+		.name = "iDisp1",
+		.id = 5,
+		.init = hdmi_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(idisp1_pin, idisp1_codec, platform),
+	},
+	{
+		.name = "iDisp2",
+		.id = 6,
+		.init = hdmi_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(idisp2_pin, idisp2_codec, platform),
+	},
+	{
+		.name = "iDisp3",
+		.id = 7,
+		.init = hdmi_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(idisp3_pin, idisp3_codec, platform),
+	},
+	{
+		.name = "iDisp4",
+		.id = 8,
+		.init = hdmi_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(idisp4_pin, idisp4_codec, platform),
+	},
+};
+
+/* SoC card */
+static struct snd_soc_card snd_soc_card_ehl_rt5660 = {
+	.name = "ehl-rt5660",
+	.owner = THIS_MODULE,
+	.dai_link = ehl_rt5660_dailink,
+	.num_links = ARRAY_SIZE(ehl_rt5660_dailink),
+	.dapm_widgets = rt5660_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(rt5660_widgets),
+	.dapm_routes = rt5660_map,
+	.num_dapm_routes = ARRAY_SIZE(rt5660_map),
+	.controls = rt5660_controls,
+	.num_controls = ARRAY_SIZE(rt5660_controls),
+	.fully_routed = true,
+	.late_probe = card_late_probe,
+};
+
+/* If hdmi codec is not supported, switch to use dummy codec */
+static void hdmi_link_init(struct snd_soc_card *card,
+			   struct sof_card_private *ctx,
+			   struct snd_soc_acpi_mach *mach)
+{
+	struct snd_soc_dai_link *link;
+	int i;
+
+	if (mach->mach_params.common_hdmi_codec_drv &&
+	    (mach->mach_params.codec_mask & IDISP_CODEC_MASK)) {
+		ctx->idisp_codec = true;
+		return;
+	}
+
+	/*
+	 * if HDMI is not enabled in kernel config, or
+	 * hdmi codec is not supported
+	 */
+	for (i = HDMI_LINK_START; i <= HDMI_LINE_END; i++) {
+		link = &card->dai_link[i];
+		link->codecs[0].name = "snd-soc-dummy";
+		link->codecs[0].dai_name = "snd-soc-dummy-dai";
+	}
+}
+
+static int snd_ehl_rt5660_probe(struct platform_device *pdev)
+{
+	struct snd_soc_acpi_mach *mach;
+	struct snd_soc_card *card = &snd_soc_card_ehl_rt5660;
+	struct sof_card_private *ctx;
+	int ret;
+
+	card->dev = &pdev->dev;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
+	snd_soc_card_set_drvdata(card, ctx);
+
+	mach = pdev->dev.platform_data;
+	ret = snd_soc_fixup_dai_links_platform_name(card,
+						    mach->mach_params.platform);
+	if (ret)
+		return ret;
+
+	hdmi_link_init(card, ctx, mach);
+
+	return devm_snd_soc_register_card(&pdev->dev, card);
+}
+
+static const struct platform_device_id ehl_board_ids[] = {
+	{ .name = "ehl_rt5660" },
+	{ }
+};
+
+static struct platform_driver snd_ehl_rt5660_driver = {
+	.driver = {
+		.name = "ehl_rt5660",
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = snd_ehl_rt5660_probe,
+	.id_table = ehl_board_ids,
+};
+
+module_platform_driver(snd_ehl_rt5660_driver);
+
+MODULE_DESCRIPTION("ASoC Intel(R) Elkhartlake + rt5660 Machine driver");
+MODULE_AUTHOR("libin.yang@intel.com");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ehl_rt5660");
diff --git a/sound/soc/intel/boards/skl_hda_dsp_generic.c b/sound/soc/intel/boards/skl_hda_dsp_generic.c
index 3be764299ab0..fc9290fb4e99 100644
--- a/sound/soc/intel/boards/skl_hda_dsp_generic.c
+++ b/sound/soc/intel/boards/skl_hda_dsp_generic.c
@@ -113,6 +113,8 @@ static char hda_soc_components[30];
 #define IDISP_ROUTE_COUNT	(IDISP_DAI_COUNT * 2)
 #define IDISP_CODEC_MASK	0x4
 
+#define HDA_CODEC_AUTOSUSPEND_DELAY_MS 1000
+
 static int skl_hda_fill_card_info(struct snd_soc_acpi_mach_params *mach_params)
 {
 	struct snd_soc_card *card = &hda_soc_card;
@@ -168,6 +170,29 @@ static int skl_hda_fill_card_info(struct snd_soc_acpi_mach_params *mach_params)
 	return 0;
 }
 
+static void skl_set_hda_codec_autosuspend_delay(struct snd_soc_card *card)
+{
+	struct snd_soc_pcm_runtime *rtd;
+	struct hdac_hda_priv *hda_pvt;
+	struct snd_soc_dai *dai;
+
+	for_each_card_rtds(card, rtd) {
+		if (!strstr(rtd->dai_link->codecs->name, "ehdaudio"))
+			continue;
+		dai = asoc_rtd_to_codec(rtd, 0);
+		hda_pvt = snd_soc_component_get_drvdata(dai->component);
+		if (hda_pvt) {
+			/*
+			 * all codecs are on the same bus, so it's sufficient
+			 * to look up only the first one
+			 */
+			snd_hda_set_power_save(hda_pvt->codec.bus,
+					       HDA_CODEC_AUTOSUSPEND_DELAY_MS);
+			break;
+		}
+	}
+}
+
 static int skl_hda_audio_probe(struct platform_device *pdev)
 {
 	struct snd_soc_acpi_mach *mach;
@@ -206,7 +231,11 @@ static int skl_hda_audio_probe(struct platform_device *pdev)
 		hda_soc_card.components = hda_soc_components;
 	}
 
-	return devm_snd_soc_register_card(&pdev->dev, &hda_soc_card);
+	ret = devm_snd_soc_register_card(&pdev->dev, &hda_soc_card);
+	if (!ret)
+		skl_set_hda_codec_autosuspend_delay(&hda_soc_card);
+
+	return ret;
 }
 
 static struct platform_driver skl_hda_audio = {
diff --git a/sound/soc/intel/boards/sof_da7219_max98373.c b/sound/soc/intel/boards/sof_da7219_max98373.c
index b707dd3b5625..8ca8f76470fa 100644
--- a/sound/soc/intel/boards/sof_da7219_max98373.c
+++ b/sound/soc/intel/boards/sof_da7219_max98373.c
@@ -86,6 +86,8 @@ static const struct snd_soc_dapm_widget widgets[] = {
 	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
 			    platform_clock_control, SND_SOC_DAPM_POST_PMD |
 			    SND_SOC_DAPM_PRE_PMU),
+
+	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
 };
 
 static const struct snd_soc_dapm_route audio_map[] = {
@@ -99,6 +101,9 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 	{ "Left Spk", NULL, "Left BE_OUT" },
 	{ "Right Spk", NULL, "Right BE_OUT" },
+
+	/* digital mics */
+	{"DMic", NULL, "SoC DMIC"},
 };
 
 /* For MAX98360A amp */
@@ -111,6 +116,8 @@ static const struct snd_soc_dapm_widget max98360a_widgets[] = {
 	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
 			    platform_clock_control, SND_SOC_DAPM_POST_PMD |
 			    SND_SOC_DAPM_PRE_PMU),
+
+	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
 };
 
 static const struct snd_soc_dapm_route max98360a_map[] = {
@@ -123,6 +130,9 @@ static const struct snd_soc_dapm_route max98360a_map[] = {
 	{ "Headset Mic", NULL, "Platform Clock" },
 
 	{"Spk", NULL, "Speaker"},
+
+	/* digital mics */
+	{"DMic", NULL, "SoC DMIC"},
 };
 
 static struct snd_soc_jack headset;
@@ -265,6 +275,9 @@ SND_SOC_DAILINK_DEF(dmic_pin,
 SND_SOC_DAILINK_DEF(dmic_codec,
 	DAILINK_COMP_ARRAY(COMP_CODEC("dmic-codec", "dmic-hifi")));
 
+SND_SOC_DAILINK_DEF(dmic16k_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("DMIC16k Pin")));
+
 SND_SOC_DAILINK_DEF(idisp1_pin,
 	DAILINK_COMP_ARRAY(COMP_CPU("iDisp1 Pin")));
 SND_SOC_DAILINK_DEF(idisp1_codec,
@@ -337,6 +350,14 @@ static struct snd_soc_dai_link dais[] = {
 		.no_pcm = 1,
 		SND_SOC_DAILINK_REG(idisp3_pin, idisp3_codec, platform),
 	},
+	{
+		.name = "dmic16k",
+		.id = 6,
+		.ignore_suspend = 1,
+		.dpcm_capture = 1,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(dmic16k_pin, dmic_codec, platform),
+	}
 };
 
 static struct snd_soc_card card_da7219_m98373 = {
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index a64dc563b47e..cffc790fc2ea 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -411,25 +411,36 @@ static int create_codec_dai_name(struct device *dev,
 
 static int set_codec_init_func(const struct snd_soc_acpi_link_adr *link,
 			       struct snd_soc_dai_link *dai_links,
-			       bool playback)
+			       bool playback, int group_id)
 {
 	int i;
 
-	for (i = 0; i < link->num_adr; i++) {
-		unsigned int part_id;
-		int codec_index;
-
-		part_id = SDW_PART_ID(link->adr_d[i].adr);
-		codec_index = find_codec_info_part(part_id);
+	do {
+		/*
+		 * Initialize the codec. If codec is part of an aggregated
+		 * group (group_id>0), initialize all codecs belonging to
+		 * same group.
+		 */
+		for (i = 0; i < link->num_adr; i++) {
+			unsigned int part_id;
+			int codec_index;
 
-		if (codec_index < 0)
-			return codec_index;
+			part_id = SDW_PART_ID(link->adr_d[i].adr);
+			codec_index = find_codec_info_part(part_id);
 
-		if (codec_info_list[codec_index].init)
-			codec_info_list[codec_index].init(link, dai_links,
-						 &codec_info_list[codec_index],
-						 playback);
-	}
+			if (codec_index < 0)
+				return codec_index;
+			/* The group_id is > 0 iff the codec is aggregated */
+			if (link->adr_d[i].endpoints->group_id != group_id)
+				continue;
+			if (codec_info_list[codec_index].init)
+				codec_info_list[codec_index].init(link,
+						dai_links,
+						&codec_info_list[codec_index],
+						playback);
+		}
+		link++;
+	} while (link->mask && group_id);
 
 	return 0;
 }
@@ -623,7 +634,7 @@ static int create_sdw_dailink(struct device *dev, int *be_index,
 			      NULL, &sdw_ops);
 
 		ret = set_codec_init_func(link, dai_links + (*be_index)++,
-					  playback);
+					  playback, group_id);
 		if (ret < 0) {
 			dev_err(dev, "failed to init codec %d", codec_index);
 			return ret;
@@ -898,6 +909,7 @@ static int mc_probe(struct platform_device *pdev)
 	struct snd_soc_card *card = &card_sof_sdw;
 	struct snd_soc_acpi_mach *mach;
 	struct mc_private *ctx;
+	int amp_num = 0, i;
 	int ret;
 
 	dev_dbg(&pdev->dev, "Entry %s\n", __func__);
@@ -924,9 +936,18 @@ static int mc_probe(struct platform_device *pdev)
 
 	snd_soc_card_set_drvdata(card, ctx);
 
+	/*
+	 * the default amp_num is zero for each codec and
+	 * amp_num will only be increased for active amp
+	 * codecs on used platform
+	 */
+	for (i = 0; i < ARRAY_SIZE(codec_info_list); i++)
+		amp_num += codec_info_list[i].amp_num;
+
 	card->components = devm_kasprintf(card->dev, GFP_KERNEL,
-					  "cfg-spk:%d",
-					  (sof_sdw_quirk & SOF_SDW_FOUR_SPK) ? 4 : 2);
+					  "cfg-spk:%d, cfg-amp:%d",
+					  (sof_sdw_quirk & SOF_SDW_FOUR_SPK)
+					  ? 4 : 2, amp_num);
 	if (!card->components)
 		return -ENOMEM;
 
diff --git a/sound/soc/intel/boards/sof_sdw_hdmi.c b/sound/soc/intel/boards/sof_sdw_hdmi.c
index c7b5612a39e6..cb1118e78e89 100644
--- a/sound/soc/intel/boards/sof_sdw_hdmi.c
+++ b/sound/soc/intel/boards/sof_sdw_hdmi.c
@@ -28,7 +28,7 @@ struct hdmi_pcm {
 int sof_sdw_hdmi_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct mc_private *ctx = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
 	struct hdmi_pcm *pcm;
 
 	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
@@ -90,7 +90,7 @@ int sof_sdw_hdmi_card_late_probe(struct snd_soc_card *card)
 	return hdac_hdmi_jack_port_init(component, &card->dapm);
 }
 #else
-int hdmi_card_late_probe(struct snd_soc_card *card)
+int sof_sdw_hdmi_card_late_probe(struct snd_soc_card *card)
 {
 	return 0;
 }
diff --git a/sound/soc/intel/boards/sof_sdw_rt1308.c b/sound/soc/intel/boards/sof_sdw_rt1308.c
index 321768e54d08..a3d0e053b1a6 100644
--- a/sound/soc/intel/boards/sof_sdw_rt1308.c
+++ b/sound/soc/intel/boards/sof_sdw_rt1308.c
@@ -93,7 +93,7 @@ static int rt1308_i2s_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_card *card = rtd->card;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int clk_id, clk_freq, pll_out;
 	int err;
 
diff --git a/sound/soc/intel/boards/sof_sdw_rt5682.c b/sound/soc/intel/boards/sof_sdw_rt5682.c
index 5aa6211a1ed9..6680dde76682 100644
--- a/sound/soc/intel/boards/sof_sdw_rt5682.c
+++ b/sound/soc/intel/boards/sof_sdw_rt5682.c
@@ -47,7 +47,8 @@ static int rt5682_rtd_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_card *card = rtd->card;
 	struct mc_private *ctx = snd_soc_card_get_drvdata(card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
 	struct snd_soc_jack *jack;
 	int ret;
 
diff --git a/sound/soc/intel/boards/sof_sdw_rt700.c b/sound/soc/intel/boards/sof_sdw_rt700.c
index 2ee4e6910d7f..d3725bb91e43 100644
--- a/sound/soc/intel/boards/sof_sdw_rt700.c
+++ b/sound/soc/intel/boards/sof_sdw_rt700.c
@@ -47,7 +47,8 @@ static int rt700_rtd_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_card *card = rtd->card;
 	struct mc_private *ctx = snd_soc_card_get_drvdata(card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
 	struct snd_soc_jack *jack;
 	int ret;
 
diff --git a/sound/soc/intel/boards/sof_sdw_rt711.c b/sound/soc/intel/boards/sof_sdw_rt711.c
index 2a4917e3d561..8590a8a8889f 100644
--- a/sound/soc/intel/boards/sof_sdw_rt711.c
+++ b/sound/soc/intel/boards/sof_sdw_rt711.c
@@ -71,7 +71,8 @@ static int rt711_rtd_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_card *card = rtd->card;
 	struct mc_private *ctx = snd_soc_card_get_drvdata(card);
-	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
 	struct snd_soc_jack *jack;
 	int ret;
 
diff --git a/sound/soc/intel/common/soc-acpi-intel-ehl-match.c b/sound/soc/intel/common/soc-acpi-intel-ehl-match.c
index a1290c3fa99f..b9ae0e2c959f 100644
--- a/sound/soc/intel/common/soc-acpi-intel-ehl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-ehl-match.c
@@ -8,8 +8,15 @@
 
 #include <sound/soc-acpi.h>
 #include <sound/soc-acpi-intel-match.h>
+#include "../skylake/skl.h"
 
 struct snd_soc_acpi_mach snd_soc_acpi_intel_ehl_machines[] = {
+	{
+		.id = "INTC1027",
+		.drv_name = "ehl_rt5660",
+		.sof_fw_filename = "sof-ehl.ri",
+		.sof_tplg_filename = "sof-ehl-rt5660.tplg",
+	},
 	{},
 };
 EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_ehl_machines);
diff --git a/sound/soc/intel/haswell/sst-haswell-dsp.c b/sound/soc/intel/haswell/sst-haswell-dsp.c
index 88c3f63bded9..de80e19454c1 100644
--- a/sound/soc/intel/haswell/sst-haswell-dsp.c
+++ b/sound/soc/intel/haswell/sst-haswell-dsp.c
@@ -243,45 +243,92 @@ static irqreturn_t hsw_irq(int irq, void *context)
 	return ret;
 }
 
+#define CSR_DEFAULT_VALUE 0x8480040E
+#define ISC_DEFAULT_VALUE 0x0
+#define ISD_DEFAULT_VALUE 0x0
+#define IMC_DEFAULT_VALUE 0x7FFF0003
+#define IMD_DEFAULT_VALUE 0x7FFF0003
+#define IPCC_DEFAULT_VALUE 0x0
+#define IPCD_DEFAULT_VALUE 0x0
+#define CLKCTL_DEFAULT_VALUE 0x7FF
+#define CSR2_DEFAULT_VALUE 0x0
+#define LTR_CTRL_DEFAULT_VALUE 0x0
+#define HMD_CTRL_DEFAULT_VALUE 0x0
+
+static void hsw_set_shim_defaults(struct sst_dsp *sst)
+{
+	sst_dsp_shim_write_unlocked(sst, SST_CSR, CSR_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_ISRX, ISC_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_ISRD, ISD_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_IMRX, IMC_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_IMRD, IMD_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_IPCX, IPCC_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_IPCD, IPCD_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_CLKCTL, CLKCTL_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_CSR2, CSR2_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_LTRC, LTR_CTRL_DEFAULT_VALUE);
+	sst_dsp_shim_write_unlocked(sst, SST_HMDC, HMD_CTRL_DEFAULT_VALUE);
+}
+
+/* all clock-gating minus DCLCGE and DTCGE */
+#define SST_VDRTCL2_CG_OTHER	0xB7D
+
 static void hsw_set_dsp_D3(struct sst_dsp *sst)
 {
-	u32 val;
 	u32 reg;
 
-	/* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */
+	/* disable clock core gating */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE);
+	reg &= ~(SST_VDRTCL2_DCLCGE);
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	/* enable power gating and switch off DRAM & IRAM blocks */
-	val = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
-	val |= SST_VDRTCL0_DSRAMPGE_MASK |
-		SST_VDRTCL0_ISRAMPGE_MASK;
-	val &= ~(SST_VDRTCL0_D3PGD | SST_VDRTCL0_D3SRAMPGD);
-	writel(val, sst->addr.pci_cfg + SST_VDRTCTL0);
+	/* stall, reset and set 24MHz XOSC */
+	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR,
+			SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST,
+			SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST);
 
-	/* switch off audio PLL */
-	val = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	val |= SST_VDRTCL2_APLLSE_MASK;
-	writel(val, sst->addr.pci_cfg + SST_VDRTCTL2);
+	/* DRAM power gating all */
+	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
+	reg |= SST_VDRTCL0_ISRAMPGE_MASK |
+		SST_VDRTCL0_DSRAMPGE_MASK;
+	reg &= ~(SST_VDRTCL0_D3SRAMPGD);
+	reg |= SST_VDRTCL0_D3PGD;
+	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0);
+	udelay(50);
 
-	/* disable MCLK(clkctl.smos = 0) */
-	sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL,
-		SST_CLKCTL_MASK, 0);
+	/* PLL shutdown enable */
+	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
+	reg |= SST_VDRTCL2_APLLSE_MASK;
+	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	/* Set D3 state, delay 50 us */
-	val = readl(sst->addr.pci_cfg + SST_PMCS);
-	val |= SST_PMCS_PS_MASK;
-	writel(val, sst->addr.pci_cfg + SST_PMCS);
-	udelay(50);
+	/* disable MCLK */
+	sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL,
+			SST_CLKCTL_MASK, 0);
 
-	/* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */
+	/* switch clock gating */
+	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
+	reg |= SST_VDRTCL2_CG_OTHER;
+	reg &= ~(SST_VDRTCL2_DTCGE);
+	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+	/* enable DTCGE separatelly */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE;
+	reg |= SST_VDRTCL2_DTCGE;
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
+	/* set shim defaults */
+	hsw_set_shim_defaults(sst);
+
+	/* set D3 */
+	reg = readl(sst->addr.pci_cfg + SST_PMCS);
+	reg |= SST_PMCS_PS_MASK;
+	writel(reg, sst->addr.pci_cfg + SST_PMCS);
 	udelay(50);
 
+	/* enable clock core gating */
+	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
+	reg |= SST_VDRTCL2_DCLCGE;
+	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+	udelay(50);
 }
 
 static void hsw_reset(struct sst_dsp *sst)
@@ -299,75 +346,62 @@ static void hsw_reset(struct sst_dsp *sst)
 		SST_CSR_RST | SST_CSR_STALL, SST_CSR_STALL);
 }
 
+/* recommended CSR state for power-up */
+#define SST_CSR_D0_MASK (0x18A09C0C | SST_CSR_DCS_MASK)
+
 static int hsw_set_dsp_D0(struct sst_dsp *sst)
 {
-	int tries = 10;
-	u32 reg, fw_dump_bit;
+	u32 reg;
 
-	/* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */
+	/* disable clock core gating */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE);
+	reg &= ~(SST_VDRTCL2_DCLCGE);
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	/* Disable D3PG (VDRTCTL0.D3PGD = 1) */
-	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
-	reg |= SST_VDRTCL0_D3PGD;
-	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0);
+	/* switch clock gating */
+	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
+	reg |= SST_VDRTCL2_CG_OTHER;
+	reg &= ~(SST_VDRTCL2_DTCGE);
+	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	/* Set D0 state */
+	/* set D0 */
 	reg = readl(sst->addr.pci_cfg + SST_PMCS);
-	reg &= ~SST_PMCS_PS_MASK;
+	reg &= ~(SST_PMCS_PS_MASK);
 	writel(reg, sst->addr.pci_cfg + SST_PMCS);
 
-	/* check that ADSP shim is enabled */
-	while (tries--) {
-		reg = readl(sst->addr.pci_cfg + SST_PMCS) & SST_PMCS_PS_MASK;
-		if (reg == 0)
-			goto finish;
-
-		msleep(1);
-	}
-
-	return -ENODEV;
-
-finish:
-	/* select SSP1 19.2MHz base clock, SSP clock 0, turn off Low Power Clock */
-	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR,
-		SST_CSR_S1IOCS | SST_CSR_SBCS1 | SST_CSR_LPCS, 0x0);
+	/* DRAM power gating none */
+	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
+	reg &= ~(SST_VDRTCL0_ISRAMPGE_MASK |
+		SST_VDRTCL0_DSRAMPGE_MASK);
+	reg |= SST_VDRTCL0_D3SRAMPGD;
+	reg |= SST_VDRTCL0_D3PGD;
+	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0);
+	mdelay(10);
 
-	/* stall DSP core, set clk to 192/96Mhz */
-	sst_dsp_shim_update_bits_unlocked(sst,
-		SST_CSR, SST_CSR_STALL | SST_CSR_DCS_MASK,
-		SST_CSR_STALL | SST_CSR_DCS(4));
+	/* set shim defaults */
+	hsw_set_shim_defaults(sst);
 
-	/* Set 24MHz MCLK, prevent local clock gating, enable SSP0 clock */
+	/* restore MCLK */
 	sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL,
-		SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0,
-		SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0);
+			SST_CLKCTL_MASK, SST_CLKCTL_MASK);
 
-	/* Stall and reset core, set CSR */
-	hsw_reset(sst);
-
-	/* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */
+	/* PLL shutdown disable */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE;
+	reg &= ~(SST_VDRTCL2_APLLSE_MASK);
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
+	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR,
+			SST_CSR_D0_MASK, SST_CSR_SBCS0 | SST_CSR_SBCS1 |
+			SST_CSR_STALL | SST_CSR_DCS(4));
 	udelay(50);
 
-	/* switch on audio PLL */
+	/* enable clock core gating */
 	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
-	reg &= ~SST_VDRTCL2_APLLSE_MASK;
+	reg |= SST_VDRTCL2_DCLCGE;
 	writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
 
-	/* set default power gating control, enable power gating control for all blocks. that is,
-	can't be accessed, please enable each block before accessing. */
-	reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
-	reg |= SST_VDRTCL0_DSRAMPGE_MASK | SST_VDRTCL0_ISRAMPGE_MASK;
-	/* for D0, always enable the block(DSRAM[0]) used for FW dump */
-	fw_dump_bit = 1 << SST_VDRTCL0_DSRAMPGE_SHIFT;
-	writel(reg & ~fw_dump_bit, sst->addr.pci_cfg + SST_VDRTCTL0);
-
+	/* clear reset */
+	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, SST_CSR_RST, 0);
 
 	/* disable DMA finish function for SSP0 & SSP1 */
 	sst_dsp_shim_update_bits_unlocked(sst, SST_CSR2, SST_CSR2_SDFD_SSP1,
@@ -384,12 +418,6 @@ static int hsw_set_dsp_D0(struct sst_dsp *sst)
 	sst_dsp_shim_update_bits(sst, SST_IMRD, (SST_IMRD_DONE | SST_IMRD_BUSY |
 				SST_IMRD_SSP0 | SST_IMRD_DMAC), 0x0);
 
-	/* clear IPC registers */
-	sst_dsp_shim_write(sst, SST_IPCX, 0x0);
-	sst_dsp_shim_write(sst, SST_IPCD, 0x0);
-	sst_dsp_shim_write(sst, 0x80, 0x6);
-	sst_dsp_shim_write(sst, 0xe0, 0x300a);
-
 	return 0;
 }
 
@@ -415,11 +443,6 @@ static void hsw_sleep(struct sst_dsp *sst)
 {
 	dev_dbg(sst->dev, "HSW_PM dsp runtime suspend\n");
 
-	/* put DSP into reset and stall */
-	sst_dsp_shim_update_bits(sst, SST_CSR,
-		SST_CSR_24MHZ_LPCS | SST_CSR_RST | SST_CSR_STALL,
-		SST_CSR_RST | SST_CSR_STALL | SST_CSR_24MHZ_LPCS);
-
 	hsw_set_dsp_D3(sst);
 	dev_dbg(sst->dev, "HSW_PM dsp runtime suspend exit\n");
 }
diff --git a/sound/soc/intel/skylake/skl-i2s.h b/sound/soc/intel/skylake/skl-i2s.h
index d7c15873c0d4..dfce91e11be1 100644
--- a/sound/soc/intel/skylake/skl-i2s.h
+++ b/sound/soc/intel/skylake/skl-i2s.h
@@ -46,7 +46,7 @@ struct skl_i2s_config_mclk {
 struct skl_i2s_config_mclk_ext {
 	u32 mdivctrl;
 	u32 mdivr_count;
-	u32 mdivr[0];
+	u32 mdivr[];
 } __packed;
 
 struct skl_i2s_config_blob_signature {
diff --git a/sound/soc/intel/skylake/skl-sst-utils.c b/sound/soc/intel/skylake/skl-sst-utils.c
index d43cbf4a71ef..b233f89517c1 100644
--- a/sound/soc/intel/skylake/skl-sst-utils.c
+++ b/sound/soc/intel/skylake/skl-sst-utils.c
@@ -290,7 +290,7 @@ int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw,
 			goto free_uuid_list;
 		}
 
-		guid_copy(&module->uuid, (guid_t *)&mod_entry->uuid);
+		import_guid(&module->uuid, mod_entry->uuid);
 
 		module->id = (i | (index << 12));
 		module->is_loadable = mod_entry->type.load_type;
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
index 69cd7a81bf2a..b9aab47d1202 100644
--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -14,6 +14,7 @@
 #include <linux/uuid.h>
 #include <sound/intel-nhlt.h>
 #include <sound/soc.h>
+#include <sound/soc-acpi.h>
 #include <sound/soc-topology.h>
 #include <uapi/sound/snd_sst_tokens.h>
 #include <uapi/sound/skl-tplg-interface.h>
@@ -578,6 +579,38 @@ static int skl_tplg_unload_pipe_modules(struct skl_dev *skl,
 	return ret;
 }
 
+static bool skl_tplg_is_multi_fmt(struct skl_dev *skl, struct skl_pipe *pipe)
+{
+	struct skl_pipe_fmt *cur_fmt;
+	struct skl_pipe_fmt *next_fmt;
+	int i;
+
+	if (pipe->nr_cfgs <= 1)
+		return false;
+
+	if (pipe->conn_type != SKL_PIPE_CONN_TYPE_FE)
+		return true;
+
+	for (i = 0; i < pipe->nr_cfgs - 1; i++) {
+		if (pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) {
+			cur_fmt = &pipe->configs[i].out_fmt;
+			next_fmt = &pipe->configs[i + 1].out_fmt;
+		} else {
+			cur_fmt = &pipe->configs[i].in_fmt;
+			next_fmt = &pipe->configs[i + 1].in_fmt;
+		}
+
+		if (!CHECK_HW_PARAMS(cur_fmt->channels, cur_fmt->freq,
+				     cur_fmt->bps,
+				     next_fmt->channels,
+				     next_fmt->freq,
+				     next_fmt->bps))
+			return true;
+	}
+
+	return false;
+}
+
 /*
  * Here, we select pipe format based on the pipe type and pipe
  * direction to determine the current config index for the pipeline.
@@ -600,6 +633,14 @@ skl_tplg_get_pipe_config(struct skl_dev *skl, struct skl_module_cfg *mconfig)
 		return 0;
 	}
 
+	if (skl_tplg_is_multi_fmt(skl, pipe)) {
+		pipe->cur_config_idx = pipe->pipe_config_idx;
+		pipe->memory_pages = pconfig->mem_pages;
+		dev_dbg(skl->dev, "found pipe config idx:%d\n",
+			pipe->cur_config_idx);
+		return 0;
+	}
+
 	if (pipe->conn_type == SKL_PIPE_CONN_TYPE_NONE) {
 		dev_dbg(skl->dev, "No conn_type detected, take 0th config\n");
 		pipe->cur_config_idx = 0;
@@ -1314,6 +1355,68 @@ static int skl_tplg_pga_event(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
+static int skl_tplg_multi_config_set_get(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol,
+					 bool is_set)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct hdac_bus *bus = snd_soc_component_get_drvdata(component);
+	struct skl_dev *skl = bus_to_skl(bus);
+	struct skl_pipeline *ppl;
+	struct skl_pipe *pipe = NULL;
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+	u32 *pipe_id;
+
+	if (!ec)
+		return -EINVAL;
+
+	if (is_set && ucontrol->value.enumerated.item[0] > ec->items)
+		return -EINVAL;
+
+	pipe_id = ec->dobj.private;
+
+	list_for_each_entry(ppl, &skl->ppl_list, node) {
+		if (ppl->pipe->ppl_id == *pipe_id) {
+			pipe = ppl->pipe;
+			break;
+		}
+	}
+	if (!pipe)
+		return -EIO;
+
+	if (is_set)
+		pipe->pipe_config_idx = ucontrol->value.enumerated.item[0];
+	else
+		ucontrol->value.enumerated.item[0]  =  pipe->pipe_config_idx;
+
+	return 0;
+}
+
+static int skl_tplg_multi_config_get(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false);
+}
+
+static int skl_tplg_multi_config_set(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true);
+}
+
+static int skl_tplg_multi_config_get_dmic(struct snd_kcontrol *kcontrol,
+					  struct snd_ctl_elem_value *ucontrol)
+{
+	return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false);
+}
+
+static int skl_tplg_multi_config_set_dmic(struct snd_kcontrol *kcontrol,
+					  struct snd_ctl_elem_value *ucontrol)
+{
+	return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true);
+}
+
 static int skl_tplg_tlv_control_get(struct snd_kcontrol *kcontrol,
 			unsigned int __user *data, unsigned int size)
 {
@@ -1853,6 +1956,16 @@ static const struct snd_soc_tplg_kcontrol_ops skl_tplg_kcontrol_ops[] = {
 		.get = skl_tplg_mic_control_get,
 		.put = skl_tplg_mic_control_set,
 	},
+	{
+		.id = SKL_CONTROL_TYPE_MULTI_IO_SELECT,
+		.get = skl_tplg_multi_config_get,
+		.put = skl_tplg_multi_config_set,
+	},
+	{
+		.id = SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC,
+		.get = skl_tplg_multi_config_get_dmic,
+		.put = skl_tplg_multi_config_set_dmic,
+	}
 };
 
 static int skl_tplg_fill_pipe_cfg(struct device *dev,
@@ -1989,7 +2102,7 @@ static int skl_tplg_get_uuid(struct device *dev, guid_t *guid,
 	      struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn)
 {
 	if (uuid_tkn->token == SKL_TKN_UUID) {
-		guid_copy(guid, (guid_t *)&uuid_tkn->uuid);
+		import_guid(guid, uuid_tkn->uuid);
 		return 0;
 	}
 
@@ -3013,12 +3126,21 @@ static int skl_tplg_control_load(struct snd_soc_component *cmpnt,
 	case SND_SOC_TPLG_CTL_ENUM:
 		tplg_ec = container_of(hdr,
 				struct snd_soc_tplg_enum_control, hdr);
-		if (kctl->access & SNDRV_CTL_ELEM_ACCESS_READWRITE) {
+		if (kctl->access & SNDRV_CTL_ELEM_ACCESS_READ) {
 			se = (struct soc_enum *)kctl->private_value;
 			if (tplg_ec->priv.size)
-				return skl_init_enum_data(bus->dev, se,
-						tplg_ec);
+				skl_init_enum_data(bus->dev, se, tplg_ec);
 		}
+
+		/*
+		 * now that the control initializations are done, remove
+		 * write permission for the DMIC configuration enums to
+		 * avoid conflicts between NHLT settings and user interaction
+		 */
+
+		if (hdr->ops.get == SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC)
+			kctl->access = SNDRV_CTL_ELEM_ACCESS_READ;
+
 		break;
 
 	default:
@@ -3376,8 +3498,8 @@ static int skl_tplg_get_manifest_tkn(struct device *dev,
 				dev_err(dev, "Too many UUID tokens\n");
 				return -EINVAL;
 			}
-			guid_copy(&skl->modules[uuid_index++]->uuid,
-				  (guid_t *)&array->uuid->uuid);
+			import_guid(&skl->modules[uuid_index++]->uuid,
+				    array->uuid->uuid);
 
 			tuple_size += sizeof(*array->uuid);
 			continue;
@@ -3488,6 +3610,37 @@ static int skl_manifest_load(struct snd_soc_component *cmpnt, int index,
 	return 0;
 }
 
+static void skl_tplg_complete(struct snd_soc_component *component)
+{
+	struct snd_soc_dobj *dobj;
+	struct snd_soc_acpi_mach *mach =
+		dev_get_platdata(component->card->dev);
+	int i;
+
+	list_for_each_entry(dobj, &component->dobj_list, list) {
+		struct snd_kcontrol *kcontrol = dobj->control.kcontrol;
+		struct soc_enum *se =
+			(struct soc_enum *)kcontrol->private_value;
+		char **texts = dobj->control.dtexts;
+		char chan_text[4];
+
+		if (dobj->type != SND_SOC_DOBJ_ENUM ||
+		    dobj->control.kcontrol->put !=
+		    skl_tplg_multi_config_set_dmic)
+			continue;
+		sprintf(chan_text, "c%d", mach->mach_params.dmic_num);
+
+		for (i = 0; i < se->items; i++) {
+			struct snd_ctl_elem_value val;
+
+			if (strstr(texts[i], chan_text)) {
+				val.value.enumerated.item[0] = i;
+				kcontrol->put(kcontrol, &val);
+			}
+		}
+	}
+}
+
 static struct snd_soc_tplg_ops skl_tplg_ops  = {
 	.widget_load = skl_tplg_widget_load,
 	.control_load = skl_tplg_control_load,
@@ -3497,6 +3650,7 @@ static struct snd_soc_tplg_ops skl_tplg_ops  = {
 	.io_ops_count = ARRAY_SIZE(skl_tplg_kcontrol_ops),
 	.manifest = skl_manifest_load,
 	.dai_load = skl_dai_load,
+	.complete = skl_tplg_complete,
 };
 
 /*
@@ -3565,8 +3719,20 @@ int skl_tplg_init(struct snd_soc_component *component, struct hdac_bus *bus)
 
 	ret = request_firmware(&fw, skl->tplg_name, bus->dev);
 	if (ret < 0) {
-		dev_info(bus->dev, "tplg fw %s load failed with %d, falling back to dfw_sst.bin",
-				skl->tplg_name, ret);
+		char alt_tplg_name[64];
+
+		snprintf(alt_tplg_name, sizeof(alt_tplg_name), "%s-tplg.bin",
+			 skl->mach->drv_name);
+		dev_info(bus->dev, "tplg fw %s load failed with %d, trying alternative tplg name %s",
+			 skl->tplg_name, ret, alt_tplg_name);
+
+		ret = request_firmware(&fw, alt_tplg_name, bus->dev);
+		if (!ret)
+			goto component_load;
+
+		dev_info(bus->dev, "tplg %s failed with %d, falling back to dfw_sst.bin",
+			 alt_tplg_name, ret);
+
 		ret = request_firmware(&fw, "dfw_sst.bin", bus->dev);
 		if (ret < 0) {
 			dev_err(bus->dev, "Fallback tplg fw %s load failed with %d\n",
@@ -3575,6 +3741,8 @@ int skl_tplg_init(struct snd_soc_component *component, struct hdac_bus *bus)
 		}
 	}
 
+component_load:
+
 	/*
 	 * The complete tplg for SKL is loaded as index 0, we don't use
 	 * any other index
diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h
index e967800dbb62..9889f728752c 100644
--- a/sound/soc/intel/skylake/skl-topology.h
+++ b/sound/soc/intel/skylake/skl-topology.h
@@ -119,7 +119,7 @@ struct skl_cpr_gtw_cfg {
 struct skl_dma_control {
 	u32 node_id;
 	u32 config_length;
-	u32 config_data[0];
+	u32 config_data[];
 } __packed;
 
 struct skl_cpr_cfg {
@@ -152,7 +152,7 @@ struct skl_up_down_mixer_cfg {
 
 struct skl_algo_cfg {
 	struct skl_base_cfg  base_cfg;
-	char params[0];
+	char params[];
 } __packed;
 
 struct skl_base_outfmt_cfg {
@@ -306,6 +306,7 @@ struct skl_pipe {
 	struct skl_path_config configs[SKL_MAX_PATH_CONFIGS];
 	struct list_head w_list;
 	bool passthru;
+	u32 pipe_config_idx;
 };
 
 enum skl_module_state {
diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h
index 2bfbf59277c4..26057f38a014 100644
--- a/sound/soc/intel/skylake/skl.h
+++ b/sound/soc/intel/skylake/skl.h
@@ -49,7 +49,7 @@ struct skl_astate_param {
 
 struct skl_astate_config {
 	u32 count;
-	struct skl_astate_param astate_table[0];
+	struct skl_astate_param astate_table[];
 };
 
 struct skl_fw_config {
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index 1e38ce858326..07f8cf9980e3 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -733,12 +733,9 @@ static int mxs_saif_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct mxs_saif *saif;
-	int irq, ret = 0;
+	int irq, ret;
 	struct device_node *master;
 
-	if (!np)
-		return -EINVAL;
-
 	saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL);
 	if (!saif)
 		return -ENOMEM;
diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c
index 125af00bba53..ce77446dbbdd 100644
--- a/sound/soc/qcom/qdsp6/q6asm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6asm-dai.c
@@ -540,19 +540,19 @@ static void compress_event_handler(uint32_t opcode, uint32_t token,
 	}
 }
 
-static int q6asm_dai_compr_open(struct snd_compr_stream *stream)
+static int q6asm_dai_compr_open(struct snd_soc_component *component,
+				struct snd_compr_stream *stream)
 {
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *c = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct snd_compr_runtime *runtime = stream->runtime;
 	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct q6asm_dai_data *pdata;
-	struct device *dev = c->dev;
+	struct device *dev = component->dev;
 	struct q6asm_dai_rtd *prtd;
 	int stream_id, size, ret;
 
 	stream_id = cpu_dai->driver->id;
-	pdata = snd_soc_component_get_drvdata(c);
+	pdata = snd_soc_component_get_drvdata(component);
 	if (!pdata) {
 		dev_err(dev, "Drv data not found ..\n");
 		return -EINVAL;
@@ -600,7 +600,8 @@ static int q6asm_dai_compr_open(struct snd_compr_stream *stream)
 	return ret;
 }
 
-static int q6asm_dai_compr_free(struct snd_compr_stream *stream)
+static int q6asm_dai_compr_free(struct snd_soc_component *component,
+				struct snd_compr_stream *stream)
 {
 	struct snd_compr_runtime *runtime = stream->runtime;
 	struct q6asm_dai_rtd *prtd = runtime->private_data;
@@ -622,13 +623,13 @@ static int q6asm_dai_compr_free(struct snd_compr_stream *stream)
 	return 0;
 }
 
-static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream,
+static int q6asm_dai_compr_set_params(struct snd_soc_component *component,
+				      struct snd_compr_stream *stream,
 				      struct snd_compr_params *params)
 {
 	struct snd_compr_runtime *runtime = stream->runtime;
 	struct q6asm_dai_rtd *prtd = runtime->private_data;
 	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *c = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	int dir = stream->direction;
 	struct q6asm_dai_data *pdata;
 	struct q6asm_flac_cfg flac_cfg;
@@ -636,7 +637,7 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream,
 	struct q6asm_alac_cfg alac_cfg;
 	struct q6asm_ape_cfg ape_cfg;
 	unsigned int wma_v9 = 0;
-	struct device *dev = c->dev;
+	struct device *dev = component->dev;
 	int ret;
 	union snd_codec_options *codec_options;
 	struct snd_dec_flac *flac;
@@ -649,7 +650,7 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream,
 
 	memcpy(&prtd->codec_param, params, sizeof(*params));
 
-	pdata = snd_soc_component_get_drvdata(c);
+	pdata = snd_soc_component_get_drvdata(component);
 	if (!pdata)
 		return -EINVAL;
 
@@ -842,7 +843,8 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream,
 	return 0;
 }
 
-static int q6asm_dai_compr_trigger(struct snd_compr_stream *stream, int cmd)
+static int q6asm_dai_compr_trigger(struct snd_soc_component *component,
+				   struct snd_compr_stream *stream, int cmd)
 {
 	struct snd_compr_runtime *runtime = stream->runtime;
 	struct q6asm_dai_rtd *prtd = runtime->private_data;
@@ -870,8 +872,9 @@ static int q6asm_dai_compr_trigger(struct snd_compr_stream *stream, int cmd)
 	return ret;
 }
 
-static int q6asm_dai_compr_pointer(struct snd_compr_stream *stream,
-		struct snd_compr_tstamp *tstamp)
+static int q6asm_dai_compr_pointer(struct snd_soc_component *component,
+				   struct snd_compr_stream *stream,
+				   struct snd_compr_tstamp *tstamp)
 {
 	struct snd_compr_runtime *runtime = stream->runtime;
 	struct q6asm_dai_rtd *prtd = runtime->private_data;
@@ -887,8 +890,9 @@ static int q6asm_dai_compr_pointer(struct snd_compr_stream *stream,
 	return 0;
 }
 
-static int q6asm_dai_compr_ack(struct snd_compr_stream *stream,
-				size_t count)
+static int q6asm_dai_compr_ack(struct snd_soc_component *component,
+			       struct snd_compr_stream *stream,
+			       size_t count)
 {
 	struct snd_compr_runtime *runtime = stream->runtime;
 	struct q6asm_dai_rtd *prtd = runtime->private_data;
@@ -901,21 +905,21 @@ static int q6asm_dai_compr_ack(struct snd_compr_stream *stream,
 	return count;
 }
 
-static int q6asm_dai_compr_mmap(struct snd_compr_stream *stream,
-		struct vm_area_struct *vma)
+static int q6asm_dai_compr_mmap(struct snd_soc_component *component,
+				struct snd_compr_stream *stream,
+				struct vm_area_struct *vma)
 {
 	struct snd_compr_runtime *runtime = stream->runtime;
 	struct q6asm_dai_rtd *prtd = runtime->private_data;
-	struct snd_soc_pcm_runtime *rtd = stream->private_data;
-	struct snd_soc_component *c = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
-	struct device *dev = c->dev;
+	struct device *dev = component->dev;
 
 	return dma_mmap_coherent(dev, vma,
 			prtd->dma_buffer.area, prtd->dma_buffer.addr,
 			prtd->dma_buffer.bytes);
 }
 
-static int q6asm_dai_compr_get_caps(struct snd_compr_stream *stream,
+static int q6asm_dai_compr_get_caps(struct snd_soc_component *component,
+				    struct snd_compr_stream *stream,
 				    struct snd_compr_caps *caps)
 {
 	caps->direction = SND_COMPRESS_PLAYBACK;
@@ -933,7 +937,8 @@ static int q6asm_dai_compr_get_caps(struct snd_compr_stream *stream,
 	return 0;
 }
 
-static int q6asm_dai_compr_get_codec_caps(struct snd_compr_stream *stream,
+static int q6asm_dai_compr_get_codec_caps(struct snd_soc_component *component,
+					  struct snd_compr_stream *stream,
 					  struct snd_compr_codec_caps *codec)
 {
 	switch (codec->codec) {
@@ -947,7 +952,7 @@ static int q6asm_dai_compr_get_codec_caps(struct snd_compr_stream *stream,
 	return 0;
 }
 
-static struct snd_compr_ops q6asm_dai_compr_ops = {
+static struct snd_compress_ops q6asm_dai_compress_ops = {
 	.open		= q6asm_dai_compr_open,
 	.free		= q6asm_dai_compr_free,
 	.set_params	= q6asm_dai_compr_set_params,
@@ -1021,7 +1026,7 @@ static const struct snd_soc_component_driver q6asm_fe_dai_component = {
 	.mmap		= q6asm_dai_mmap,
 	.pcm_construct	= q6asm_dai_pcm_new,
 	.pcm_destruct	= q6asm_dai_pcm_free,
-	.compr_ops	= &q6asm_dai_compr_ops,
+	.compress_ops	= &q6asm_dai_compress_ops,
 };
 
 static struct snd_soc_dai_driver q6asm_fe_dais_template[] = {
diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c
index 50062eb79adb..def3ae78b4a7 100644
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -29,11 +29,11 @@ static int soc_compr_components_open(struct snd_compr_stream *cstream,
 	int i, ret;
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->open)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->open)
 			continue;
 
-		ret = component->driver->compr_ops->open(cstream);
+		ret = component->driver->compress_ops->open(component, cstream);
 		if (ret < 0) {
 			dev_err(component->dev,
 				"Compress ASoC: can't open platform %s: %d\n",
@@ -59,11 +59,11 @@ static int soc_compr_components_free(struct snd_compr_stream *cstream,
 		if (component == last)
 			break;
 
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->free)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->free)
 			continue;
 
-		component->driver->compr_ops->free(cstream);
+		component->driver->compress_ops->free(component, cstream);
 	}
 
 	return 0;
@@ -72,8 +72,8 @@ static int soc_compr_components_free(struct snd_compr_stream *cstream,
 static int soc_compr_open(struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct snd_soc_component *component, *save = NULL;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_component *component = NULL, *save = NULL;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret, i;
 
 	for_each_rtd_components(rtd, i, component) {
@@ -87,15 +87,9 @@ static int soc_compr_open(struct snd_compr_stream *cstream)
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->startup) {
-		ret = cpu_dai->driver->cops->startup(cstream, cpu_dai);
-		if (ret < 0) {
-			dev_err(cpu_dai->dev,
-				"Compress ASoC: can't open interface %s: %d\n",
-				cpu_dai->name, ret);
-			goto out;
-		}
-	}
+	ret = snd_soc_dai_compr_startup(cpu_dai, cstream);
+	if (ret < 0)
+		goto out;
 
 	ret = soc_compr_components_open(cstream, &component);
 	if (ret < 0)
@@ -120,8 +114,7 @@ static int soc_compr_open(struct snd_compr_stream *cstream)
 machine_err:
 	soc_compr_components_free(cstream, component);
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->shutdown)
-		cpu_dai->driver->cops->shutdown(cstream, cpu_dai);
+	snd_soc_dai_compr_shutdown(cpu_dai, cstream);
 out:
 	mutex_unlock(&rtd->card->pcm_mutex);
 pm_err:
@@ -141,7 +134,7 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream)
 	struct snd_pcm_substream *fe_substream =
 		 fe->pcm->streams[cstream->direction].substream;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = fe->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(fe, 0);
 	struct snd_soc_dpcm *dpcm;
 	struct snd_soc_dapm_widget_list *list;
 	int stream;
@@ -178,15 +171,9 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream)
 		goto out;
 	}
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->startup) {
-		ret = cpu_dai->driver->cops->startup(cstream, cpu_dai);
-		if (ret < 0) {
-			dev_err(cpu_dai->dev,
-				"Compress ASoC: can't open interface %s: %d\n",
-				cpu_dai->name, ret);
-			goto out;
-		}
-	}
+	ret = snd_soc_dai_compr_startup(cpu_dai, cstream);
+	if (ret < 0)
+		goto out;
 
 	ret = soc_compr_components_open(cstream, &component);
 	if (ret < 0)
@@ -216,8 +203,7 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream)
 machine_err:
 	soc_compr_components_free(cstream, component);
 open_err:
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->shutdown)
-		cpu_dai->driver->cops->shutdown(cstream, cpu_dai);
+	snd_soc_dai_compr_shutdown(cpu_dai, cstream);
 out:
 	dpcm_path_put(&list);
 be_err:
@@ -230,8 +216,8 @@ static int soc_compr_free(struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int stream, i;
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
@@ -256,8 +242,7 @@ static int soc_compr_free(struct snd_compr_stream *cstream)
 
 	soc_compr_components_free(cstream, NULL);
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->shutdown)
-		cpu_dai->driver->cops->shutdown(cstream, cpu_dai);
+	snd_soc_dai_compr_shutdown(cpu_dai, cstream);
 
 	snd_soc_dapm_stream_stop(rtd, stream);
 
@@ -274,7 +259,7 @@ static int soc_compr_free(struct snd_compr_stream *cstream)
 static int soc_compr_free_fe(struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *fe = cstream->private_data;
-	struct snd_soc_dai *cpu_dai = fe->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(fe, 0);
 	struct snd_soc_dpcm *dpcm;
 	int stream, ret;
 
@@ -313,8 +298,7 @@ static int soc_compr_free_fe(struct snd_compr_stream *cstream)
 
 	soc_compr_components_free(cstream, NULL);
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->shutdown)
-		cpu_dai->driver->cops->shutdown(cstream, cpu_dai);
+	snd_soc_dai_compr_shutdown(cpu_dai, cstream);
 
 	mutex_unlock(&fe->card->mutex);
 	return 0;
@@ -328,11 +312,12 @@ static int soc_compr_components_trigger(struct snd_compr_stream *cstream,
 	int i, ret;
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->trigger)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->trigger)
 			continue;
 
-		ret = component->driver->compr_ops->trigger(cstream, cmd);
+		ret = component->driver->compress_ops->trigger(
+			component, cstream, cmd);
 		if (ret < 0)
 			return ret;
 	}
@@ -343,8 +328,8 @@ static int soc_compr_components_trigger(struct snd_compr_stream *cstream,
 static int soc_compr_trigger(struct snd_compr_stream *cstream, int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret;
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
@@ -353,8 +338,9 @@ static int soc_compr_trigger(struct snd_compr_stream *cstream, int cmd)
 	if (ret < 0)
 		goto out;
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->trigger)
-		cpu_dai->driver->cops->trigger(cstream, cmd, cpu_dai);
+	ret = snd_soc_dai_compr_trigger(cpu_dai, cstream, cmd);
+	if (ret < 0)
+		goto out;
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
@@ -373,7 +359,7 @@ static int soc_compr_trigger(struct snd_compr_stream *cstream, int cmd)
 static int soc_compr_trigger_fe(struct snd_compr_stream *cstream, int cmd)
 {
 	struct snd_soc_pcm_runtime *fe = cstream->private_data;
-	struct snd_soc_dai *cpu_dai = fe->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(fe, 0);
 	int ret, stream;
 
 	if (cmd == SND_COMPR_TRIGGER_PARTIAL_DRAIN ||
@@ -387,11 +373,9 @@ static int soc_compr_trigger_fe(struct snd_compr_stream *cstream, int cmd)
 
 	mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->trigger) {
-		ret = cpu_dai->driver->cops->trigger(cstream, cmd, cpu_dai);
-		if (ret < 0)
-			goto out;
-	}
+	ret = snd_soc_dai_compr_trigger(cpu_dai, cstream, cmd);
+	if (ret < 0)
+		goto out;
 
 	ret = soc_compr_components_trigger(cstream, cmd);
 	if (ret < 0)
@@ -430,11 +414,12 @@ static int soc_compr_components_set_params(struct snd_compr_stream *cstream,
 	int i, ret;
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->set_params)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->set_params)
 			continue;
 
-		ret = component->driver->compr_ops->set_params(cstream, params);
+		ret = component->driver->compress_ops->set_params(
+			component, cstream, params);
 		if (ret < 0)
 			return ret;
 	}
@@ -446,7 +431,7 @@ static int soc_compr_set_params(struct snd_compr_stream *cstream,
 				struct snd_compr_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int ret;
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
@@ -458,11 +443,9 @@ static int soc_compr_set_params(struct snd_compr_stream *cstream,
 	 * that these callbacks will configure everything for this compress
 	 * path, like configuring a PCM port for a CODEC.
 	 */
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->set_params) {
-		ret = cpu_dai->driver->cops->set_params(cstream, params, cpu_dai);
-		if (ret < 0)
-			goto err;
-	}
+	ret = snd_soc_dai_compr_set_params(cpu_dai, cstream, params);
+	if (ret < 0)
+		goto err;
 
 	ret = soc_compr_components_set_params(cstream, params);
 	if (ret < 0)
@@ -500,7 +483,7 @@ static int soc_compr_set_params_fe(struct snd_compr_stream *cstream,
 	struct snd_soc_pcm_runtime *fe = cstream->private_data;
 	struct snd_pcm_substream *fe_substream =
 		 fe->pcm->streams[cstream->direction].substream;
-	struct snd_soc_dai *cpu_dai = fe->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(fe, 0);
 	int ret, stream;
 
 	if (cstream->direction == SND_COMPRESS_PLAYBACK)
@@ -528,11 +511,9 @@ static int soc_compr_set_params_fe(struct snd_compr_stream *cstream,
 	if (ret < 0)
 		goto out;
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->set_params) {
-		ret = cpu_dai->driver->cops->set_params(cstream, params, cpu_dai);
-		if (ret < 0)
-			goto out;
-	}
+	ret = snd_soc_dai_compr_set_params(cpu_dai, cstream, params);
+	if (ret < 0)
+		goto out;
 
 	ret = soc_compr_components_set_params(cstream, params);
 	if (ret < 0)
@@ -558,23 +539,22 @@ static int soc_compr_get_params(struct snd_compr_stream *cstream,
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int i, ret = 0;
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->get_params) {
-		ret = cpu_dai->driver->cops->get_params(cstream, params, cpu_dai);
-		if (ret < 0)
-			goto err;
-	}
+	ret = snd_soc_dai_compr_get_params(cpu_dai, cstream, params);
+	if (ret < 0)
+		goto err;
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->get_params)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->get_params)
 			continue;
 
-		ret = component->driver->compr_ops->get_params(cstream, params);
+		ret = component->driver->compress_ops->get_params(
+			component, cstream, params);
 		break;
 	}
 
@@ -593,11 +573,12 @@ static int soc_compr_get_caps(struct snd_compr_stream *cstream,
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->get_caps)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->get_caps)
 			continue;
 
-		ret = component->driver->compr_ops->get_caps(cstream, caps);
+		ret = component->driver->compress_ops->get_caps(
+			component, cstream, caps);
 		break;
 	}
 
@@ -615,12 +596,12 @@ static int soc_compr_get_codec_caps(struct snd_compr_stream *cstream,
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->get_codec_caps)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->get_codec_caps)
 			continue;
 
-		ret = component->driver->compr_ops->get_codec_caps(cstream,
-								   codec);
+		ret = component->driver->compress_ops->get_codec_caps(
+			component, cstream, codec);
 		break;
 	}
 
@@ -632,23 +613,22 @@ static int soc_compr_ack(struct snd_compr_stream *cstream, size_t bytes)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int i, ret = 0;
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->ack) {
-		ret = cpu_dai->driver->cops->ack(cstream, bytes, cpu_dai);
-		if (ret < 0)
-			goto err;
-	}
+	ret = snd_soc_dai_compr_ack(cpu_dai, cstream, bytes);
+	if (ret < 0)
+		goto err;
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->ack)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->ack)
 			continue;
 
-		ret = component->driver->compr_ops->ack(cstream, bytes);
+		ret = component->driver->compress_ops->ack(
+			component, cstream, bytes);
 		if (ret < 0)
 			goto err;
 	}
@@ -664,22 +644,24 @@ static int soc_compr_pointer(struct snd_compr_stream *cstream,
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_soc_component *component;
 	int i, ret = 0;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->pointer)
-		cpu_dai->driver->cops->pointer(cstream, tstamp, cpu_dai);
+	ret = snd_soc_dai_compr_pointer(cpu_dai, cstream, tstamp);
+	if (ret < 0)
+		goto out;
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->pointer)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->pointer)
 			continue;
 
-		ret = component->driver->compr_ops->pointer(cstream, tstamp);
+		ret = component->driver->compress_ops->pointer(
+			component, cstream, tstamp);
 		break;
 	}
-
+out:
 	mutex_unlock(&rtd->card->pcm_mutex);
 	return ret;
 }
@@ -694,11 +676,12 @@ static int soc_compr_copy(struct snd_compr_stream *cstream,
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->copy)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->copy)
 			continue;
 
-		ret = component->driver->compr_ops->copy(cstream, buf, count);
+		ret = component->driver->compress_ops->copy(
+			component, cstream, buf, count);
 		break;
 	}
 
@@ -711,22 +694,20 @@ static int soc_compr_set_metadata(struct snd_compr_stream *cstream,
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int i, ret;
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->set_metadata) {
-		ret = cpu_dai->driver->cops->set_metadata(cstream, metadata, cpu_dai);
-		if (ret < 0)
-			return ret;
-	}
+	ret = snd_soc_dai_compr_set_metadata(cpu_dai, cstream, metadata);
+	if (ret < 0)
+		return ret;
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->set_metadata)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->set_metadata)
 			continue;
 
-		ret = component->driver->compr_ops->set_metadata(cstream,
-								 metadata);
+		ret = component->driver->compress_ops->set_metadata(
+			component, cstream, metadata);
 		if (ret < 0)
 			return ret;
 	}
@@ -739,22 +720,20 @@ static int soc_compr_get_metadata(struct snd_compr_stream *cstream,
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	int i, ret;
 
-	if (cpu_dai->driver->cops && cpu_dai->driver->cops->get_metadata) {
-		ret = cpu_dai->driver->cops->get_metadata(cstream, metadata, cpu_dai);
-		if (ret < 0)
-			return ret;
-	}
+	ret = snd_soc_dai_compr_get_metadata(cpu_dai, cstream, metadata);
+	if (ret < 0)
+		return ret;
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->get_metadata)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->get_metadata)
 			continue;
 
-		return component->driver->compr_ops->get_metadata(cstream,
-								  metadata);
+		return component->driver->compress_ops->get_metadata(
+			component, cstream, metadata);
 	}
 
 	return 0;
@@ -801,8 +780,8 @@ static struct snd_compr_ops soc_compr_dyn_ops = {
 int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num)
 {
 	struct snd_soc_component *component;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct snd_compr *compr;
 	struct snd_pcm *be_pcm;
 	char new_name[64];
@@ -879,8 +858,8 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num)
 	}
 
 	for_each_rtd_components(rtd, i, component) {
-		if (!component->driver->compr_ops ||
-		    !component->driver->compr_ops->copy)
+		if (!component->driver->compress_ops ||
+		    !component->driver->compress_ops->copy)
 			continue;
 
 		compr->ops->copy = soc_compr_copy;
@@ -891,7 +870,7 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num)
 	ret = snd_compress_new(rtd->card->snd_card, num, direction,
 				new_name, compr);
 	if (ret < 0) {
-		component = rtd->codec_dai->component;
+		component = asoc_rtd_to_codec(rtd, 0)->component;
 		dev_err(component->dev,
 			"Compress ASoC: can't create compress for codec %s: %d\n",
 			component->name, ret);
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 843b8b1c89d4..95d8189e45ab 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -364,7 +364,7 @@ EXPORT_SYMBOL_GPL(snd_soc_get_pcm_runtime);
  */
 void snd_soc_close_delayed_work(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int playback = SNDRV_PCM_STREAM_PLAYBACK;
 
 	mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
@@ -487,20 +487,18 @@ static struct snd_soc_pcm_runtime *soc_new_pcm_runtime(
 	 * dais = [][][][][][][][][][][][][][][][][][]
 	 *	  ^cpu_dais         ^codec_dais
 	 *	  |--- num_cpus ---|--- num_codecs --|
+	 * see
+	 *	asoc_rtd_to_cpu()
+	 *	asoc_rtd_to_codec()
 	 */
-	rtd->cpu_dais	= &rtd->dais[0];
-	rtd->codec_dais	= &rtd->dais[dai_link->num_cpus];
-
-	/*
-	 * rtd remaining settings
-	 */
-	rtd->card = card;
-	rtd->dai_link = dai_link;
+	rtd->num_cpus	= dai_link->num_cpus;
+	rtd->num_codecs	= dai_link->num_codecs;
+	rtd->card	= card;
+	rtd->dai_link	= dai_link;
+	rtd->num	= card->num_rtd++;
 
 	/* see for_each_card_rtds */
 	list_add_tail(&rtd->list, &card->rtd_list);
-	rtd->num = card->num_rtd;
-	card->num_rtd++;
 
 	return rtd;
 
@@ -744,9 +742,6 @@ static inline void soc_resume_init(struct snd_soc_card *card)
 }
 #endif
 
-static const struct snd_soc_dai_ops null_dai_ops = {
-};
-
 static struct device_node
 *soc_component_to_node(struct snd_soc_component *component)
 {
@@ -865,8 +860,12 @@ static int soc_dai_link_sanity_check(struct snd_soc_card *card,
 		 * Defer card registration if codec component is not added to
 		 * component list.
 		 */
-		if (!soc_find_component(codec))
+		if (!soc_find_component(codec)) {
+			dev_dbg(card->dev,
+				"ASoC: codec component %s not found for link %s\n",
+				codec->name, link->name);
 			return -EPROBE_DEFER;
+		}
 	}
 
 	for_each_link_platforms(link, i, platform) {
@@ -886,8 +885,12 @@ static int soc_dai_link_sanity_check(struct snd_soc_card *card,
 		 * Defer card registration if platform component is not added to
 		 * component list.
 		 */
-		if (!soc_find_component(platform))
+		if (!soc_find_component(platform)) {
+			dev_dbg(card->dev,
+				"ASoC: platform component %s not found for link %s\n",
+				platform->name, link->name);
 			return -EPROBE_DEFER;
+		}
 	}
 
 	for_each_link_cpus(link, i, cpu) {
@@ -908,8 +911,12 @@ static int soc_dai_link_sanity_check(struct snd_soc_card *card,
 		 * component list.
 		 */
 		if ((cpu->of_node || cpu->name) &&
-		    !soc_find_component(cpu))
+		    !soc_find_component(cpu)) {
+			dev_dbg(card->dev,
+				"ASoC: cpu component %s not found for link %s\n",
+				cpu->name, link->name);
 			return -EPROBE_DEFER;
+		}
 
 		/*
 		 * At least one of CPU DAI name or CPU device name/node must be
@@ -989,36 +996,28 @@ int snd_soc_add_pcm_runtime(struct snd_soc_card *card,
 	if (!rtd)
 		return -ENOMEM;
 
-	rtd->num_cpus = dai_link->num_cpus;
 	for_each_link_cpus(dai_link, i, cpu) {
-		rtd->cpu_dais[i] = snd_soc_find_dai(cpu);
-		if (!rtd->cpu_dais[i]) {
+		asoc_rtd_to_cpu(rtd, i) = snd_soc_find_dai(cpu);
+		if (!asoc_rtd_to_cpu(rtd, i)) {
 			dev_info(card->dev, "ASoC: CPU DAI %s not registered\n",
 				 cpu->dai_name);
 			goto _err_defer;
 		}
-		snd_soc_rtd_add_component(rtd, rtd->cpu_dais[i]->component);
+		snd_soc_rtd_add_component(rtd, asoc_rtd_to_cpu(rtd, i)->component);
 	}
 
-	/* Single cpu links expect cpu and cpu_dai in runtime data */
-	rtd->cpu_dai = rtd->cpu_dais[0];
-
 	/* Find CODEC from registered CODECs */
-	rtd->num_codecs = dai_link->num_codecs;
 	for_each_link_codecs(dai_link, i, codec) {
-		rtd->codec_dais[i] = snd_soc_find_dai(codec);
-		if (!rtd->codec_dais[i]) {
+		asoc_rtd_to_codec(rtd, i) = snd_soc_find_dai(codec);
+		if (!asoc_rtd_to_codec(rtd, i)) {
 			dev_info(card->dev, "ASoC: CODEC DAI %s not registered\n",
 				 codec->dai_name);
 			goto _err_defer;
 		}
 
-		snd_soc_rtd_add_component(rtd, rtd->codec_dais[i]->component);
+		snd_soc_rtd_add_component(rtd, asoc_rtd_to_codec(rtd, i)->component);
 	}
 
-	/* Single codec links expect codec and codec_dai in runtime data */
-	rtd->codec_dai = rtd->codec_dais[0];
-
 	/* Find PLATFORM from registered PLATFORMs */
 	for_each_link_platforms(dai_link, i, platform) {
 		for_each_component(component) {
@@ -1037,32 +1036,11 @@ int snd_soc_add_pcm_runtime(struct snd_soc_card *card,
 }
 EXPORT_SYMBOL_GPL(snd_soc_add_pcm_runtime);
 
-static int soc_dai_pcm_new(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_dai *dai;
-	int i, ret = 0;
-
-	for_each_rtd_dais(rtd, i, dai) {
-		struct snd_soc_dai_driver *drv = dai->driver;
-
-		if (drv->pcm_new)
-			ret = drv->pcm_new(rtd, dai);
-		if (ret < 0) {
-			dev_err(dai->dev,
-				"ASoC: Failed to bind %s with pcm device\n",
-				dai->name);
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
 static int soc_init_pcm_runtime(struct snd_soc_card *card,
 				struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dai_link *dai_link = rtd->dai_link;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct snd_soc_component *component;
 	int ret, num, i;
 
@@ -1122,7 +1100,7 @@ static int soc_init_pcm_runtime(struct snd_soc_card *card,
 		return ret;
 	}
 
-	return soc_dai_pcm_new(rtd);
+	return snd_soc_pcm_dai_new(rtd);
 }
 
 static void soc_set_name_prefix(struct snd_soc_card *card,
@@ -1278,64 +1256,23 @@ static int soc_probe_component(struct snd_soc_card *card,
 	return ret;
 }
 
-static void soc_remove_dai(struct snd_soc_dai *dai, int order)
-{
-	int err;
-
-	if (!dai || !dai->probed || !dai->driver ||
-	    dai->driver->remove_order != order)
-		return;
-
-	err = snd_soc_dai_remove(dai);
-	if (err < 0)
-		dev_err(dai->dev,
-			"ASoC: failed to remove %s: %d\n",
-			dai->name, err);
-
-	dai->probed = 0;
-}
-
-static int soc_probe_dai(struct snd_soc_dai *dai, int order)
-{
-	int ret;
-
-	if (dai->probed ||
-	    dai->driver->probe_order != order)
-		return 0;
-
-	ret = snd_soc_dai_probe(dai);
-	if (ret < 0) {
-		dev_err(dai->dev, "ASoC: failed to probe DAI %s: %d\n",
-			dai->name, ret);
-		return ret;
-	}
-
-	dai->probed = 1;
-
-	return 0;
-}
-
 static void soc_remove_link_dais(struct snd_soc_card *card)
 {
-	int i;
-	struct snd_soc_dai *dai;
 	struct snd_soc_pcm_runtime *rtd;
 	int order;
 
 	for_each_comp_order(order) {
 		for_each_card_rtds(card, rtd) {
-			/* remove DAIs */
-			for_each_rtd_dais(rtd, i, dai)
-				soc_remove_dai(dai, order);
+			/* remove all rtd connected DAIs in good order */
+			snd_soc_pcm_dai_remove(rtd, order);
 		}
 	}
 }
 
 static int soc_probe_link_dais(struct snd_soc_card *card)
 {
-	struct snd_soc_dai *dai;
 	struct snd_soc_pcm_runtime *rtd;
-	int i, order, ret;
+	int order, ret;
 
 	for_each_comp_order(order) {
 		for_each_card_rtds(card, rtd) {
@@ -1344,12 +1281,10 @@ static int soc_probe_link_dais(struct snd_soc_card *card)
 				"ASoC: probe %s dai link %d late %d\n",
 				card->name, rtd->num, order);
 
-			/* probe the CPU DAI */
-			for_each_rtd_dais(rtd, i, dai) {
-				ret = soc_probe_dai(dai, order);
-				if (ret)
-					return ret;
-			}
+			/* probe all rtd connected DAIs in good order */
+			ret = snd_soc_pcm_dai_probe(rtd, order);
+			if (ret)
+				return ret;
 		}
 	}
 
@@ -2404,8 +2339,6 @@ struct snd_soc_dai *snd_soc_register_dai(struct snd_soc_component *component,
 	dai->component = component;
 	dai->dev = dev;
 	dai->driver = dai_drv;
-	if (!dai->driver->ops)
-		dai->driver->ops = &null_dai_ops;
 
 	/* see for_each_component_dais */
 	list_add_tail(&dai->list, &component->dai_list);
diff --git a/sound/soc/soc-dai.c b/sound/soc/soc-dai.c
index 31c41559034b..8e5fe012aa1d 100644
--- a/sound/soc/soc-dai.c
+++ b/sound/soc/soc-dai.c
@@ -9,6 +9,24 @@
 #include <sound/soc.h>
 #include <sound/soc-dai.h>
 
+#define soc_dai_ret(dai, ret) _soc_dai_ret(dai, __func__, ret)
+static inline int _soc_dai_ret(struct snd_soc_dai *dai,
+			       const char *func, int ret)
+{
+	switch (ret) {
+	case -EPROBE_DEFER:
+	case -ENOTSUPP:
+	case 0:
+		break;
+	default:
+		dev_err(dai->dev,
+			"ASoC: error at %s on %s: %d\n",
+			func, dai->name, ret);
+	}
+
+	return ret;
+}
+
 /**
  * snd_soc_dai_set_sysclk - configure DAI system or master clock.
  * @dai: DAI
@@ -21,11 +39,16 @@
 int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 			   unsigned int freq, int dir)
 {
-	if (dai->driver->ops->set_sysclk)
-		return dai->driver->ops->set_sysclk(dai, clk_id, freq, dir);
+	int ret;
 
-	return snd_soc_component_set_sysclk(dai->component, clk_id, 0,
-					    freq, dir);
+	if (dai->driver->ops &&
+	    dai->driver->ops->set_sysclk)
+		ret = dai->driver->ops->set_sysclk(dai, clk_id, freq, dir);
+	else
+		ret = snd_soc_component_set_sysclk(dai->component, clk_id, 0,
+						   freq, dir);
+
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk);
 
@@ -42,10 +65,13 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk);
 int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
 			   int div_id, int div)
 {
-	if (dai->driver->ops->set_clkdiv)
-		return dai->driver->ops->set_clkdiv(dai, div_id, div);
-	else
-		return -EINVAL;
+	int ret = -EINVAL;
+
+	if (dai->driver->ops &&
+	    dai->driver->ops->set_clkdiv)
+		ret = dai->driver->ops->set_clkdiv(dai, div_id, div);
+
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_clkdiv);
 
@@ -62,12 +88,17 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_clkdiv);
 int snd_soc_dai_set_pll(struct snd_soc_dai *dai, int pll_id, int source,
 			unsigned int freq_in, unsigned int freq_out)
 {
-	if (dai->driver->ops->set_pll)
-		return dai->driver->ops->set_pll(dai, pll_id, source,
-						 freq_in, freq_out);
+	int ret;
+
+	if (dai->driver->ops &&
+	    dai->driver->ops->set_pll)
+		ret = dai->driver->ops->set_pll(dai, pll_id, source,
+						freq_in, freq_out);
+	else
+		ret = snd_soc_component_set_pll(dai->component, pll_id, source,
+						freq_in, freq_out);
 
-	return snd_soc_component_set_pll(dai->component, pll_id, source,
-					 freq_in, freq_out);
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll);
 
@@ -80,10 +111,13 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll);
  */
 int snd_soc_dai_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
 {
-	if (dai->driver->ops->set_bclk_ratio)
-		return dai->driver->ops->set_bclk_ratio(dai, ratio);
-	else
-		return -EINVAL;
+	int ret = -EINVAL;
+
+	if (dai->driver->ops &&
+	    dai->driver->ops->set_bclk_ratio)
+		ret = dai->driver->ops->set_bclk_ratio(dai, ratio);
+
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_bclk_ratio);
 
@@ -96,9 +130,13 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_bclk_ratio);
  */
 int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
-	if (dai->driver->ops->set_fmt == NULL)
-		return -ENOTSUPP;
-	return dai->driver->ops->set_fmt(dai, fmt);
+	int ret = -ENOTSUPP;
+
+	if (dai->driver->ops &&
+	    dai->driver->ops->set_fmt)
+		ret = dai->driver->ops->set_fmt(dai, fmt);
+
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_fmt);
 
@@ -153,7 +191,10 @@ int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
 			     unsigned int tx_mask, unsigned int rx_mask,
 			     int slots, int slot_width)
 {
-	if (dai->driver->ops->xlate_tdm_slot_mask)
+	int ret = -ENOTSUPP;
+
+	if (dai->driver->ops &&
+	    dai->driver->ops->xlate_tdm_slot_mask)
 		dai->driver->ops->xlate_tdm_slot_mask(slots,
 						      &tx_mask, &rx_mask);
 	else
@@ -162,11 +203,11 @@ int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
 	dai->tx_mask = tx_mask;
 	dai->rx_mask = rx_mask;
 
-	if (dai->driver->ops->set_tdm_slot)
-		return dai->driver->ops->set_tdm_slot(dai, tx_mask, rx_mask,
+	if (dai->driver->ops &&
+	    dai->driver->ops->set_tdm_slot)
+		ret = dai->driver->ops->set_tdm_slot(dai, tx_mask, rx_mask,
 						      slots, slot_width);
-	else
-		return -ENOTSUPP;
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_tdm_slot);
 
@@ -186,11 +227,13 @@ int snd_soc_dai_set_channel_map(struct snd_soc_dai *dai,
 				unsigned int tx_num, unsigned int *tx_slot,
 				unsigned int rx_num, unsigned int *rx_slot)
 {
-	if (dai->driver->ops->set_channel_map)
-		return dai->driver->ops->set_channel_map(dai, tx_num, tx_slot,
-							 rx_num, rx_slot);
-	else
-		return -ENOTSUPP;
+	int ret = -ENOTSUPP;
+
+	if (dai->driver->ops &&
+	    dai->driver->ops->set_channel_map)
+		ret = dai->driver->ops->set_channel_map(dai, tx_num, tx_slot,
+							rx_num, rx_slot);
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_channel_map);
 
@@ -208,11 +251,13 @@ int snd_soc_dai_get_channel_map(struct snd_soc_dai *dai,
 				unsigned int *tx_num, unsigned int *tx_slot,
 				unsigned int *rx_num, unsigned int *rx_slot)
 {
-	if (dai->driver->ops->get_channel_map)
-		return dai->driver->ops->get_channel_map(dai, tx_num, tx_slot,
-							 rx_num, rx_slot);
-	else
-		return -ENOTSUPP;
+	int ret = -ENOTSUPP;
+
+	if (dai->driver->ops &&
+	    dai->driver->ops->get_channel_map)
+		ret = dai->driver->ops->get_channel_map(dai, tx_num, tx_slot,
+							rx_num, rx_slot);
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_get_channel_map);
 
@@ -225,10 +270,13 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_get_channel_map);
  */
 int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate)
 {
-	if (dai->driver->ops->set_tristate)
-		return dai->driver->ops->set_tristate(dai, tristate);
-	else
-		return -EINVAL;
+	int ret = -EINVAL;
+
+	if (dai->driver->ops &&
+	    dai->driver->ops->set_tristate)
+		ret = dai->driver->ops->set_tristate(dai, tristate);
+
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_tristate);
 
@@ -243,13 +291,17 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_tristate);
 int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute,
 			     int direction)
 {
-	if (dai->driver->ops->mute_stream)
-		return dai->driver->ops->mute_stream(dai, mute, direction);
+	int ret = -ENOTSUPP;
+
+	if (dai->driver->ops &&
+	    dai->driver->ops->mute_stream)
+		ret = dai->driver->ops->mute_stream(dai, mute, direction);
 	else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
+		 dai->driver->ops &&
 		 dai->driver->ops->digital_mute)
-		return dai->driver->ops->digital_mute(dai, mute);
-	else
-		return -ENOTSUPP;
+		ret = dai->driver->ops->digital_mute(dai, mute);
+
+	return soc_dai_ret(dai, ret);
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_digital_mute);
 
@@ -258,35 +310,27 @@ int snd_soc_dai_hw_params(struct snd_soc_dai *dai,
 			  struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	int ret;
+	int ret = 0;
 
 	/* perform any topology hw_params fixups before DAI  */
 	if (rtd->dai_link->be_hw_params_fixup) {
 		ret = rtd->dai_link->be_hw_params_fixup(rtd, params);
-		if (ret < 0) {
-			dev_err(rtd->dev,
-				"ASoC: hw_params topology fixup failed %d\n",
-				ret);
-			return ret;
-		}
+		if (ret < 0)
+			goto end;
 	}
 
-	if (dai->driver->ops->hw_params) {
+	if (dai->driver->ops &&
+	    dai->driver->ops->hw_params)
 		ret = dai->driver->ops->hw_params(substream, params, dai);
-		if (ret < 0) {
-			dev_err(dai->dev, "ASoC: can't set %s hw params: %d\n",
-				dai->name, ret);
-			return ret;
-		}
-	}
-
-	return 0;
+end:
+	return soc_dai_ret(dai, ret);
 }
 
 void snd_soc_dai_hw_free(struct snd_soc_dai *dai,
 			 struct snd_pcm_substream *substream)
 {
-	if (dai->driver->ops->hw_free)
+	if (dai->driver->ops &&
+	    dai->driver->ops->hw_free)
 		dai->driver->ops->hw_free(substream, dai);
 }
 
@@ -295,96 +339,287 @@ int snd_soc_dai_startup(struct snd_soc_dai *dai,
 {
 	int ret = 0;
 
-	if (dai->driver->ops->startup)
+	if (dai->driver->ops &&
+	    dai->driver->ops->startup)
 		ret = dai->driver->ops->startup(substream, dai);
 
-	return ret;
+	return soc_dai_ret(dai, ret);
 }
 
 void snd_soc_dai_shutdown(struct snd_soc_dai *dai,
 			 struct snd_pcm_substream *substream)
 {
-	if (dai->driver->ops->shutdown)
+	if (dai->driver->ops &&
+	    dai->driver->ops->shutdown)
 		dai->driver->ops->shutdown(substream, dai);
 }
 
-int snd_soc_dai_prepare(struct snd_soc_dai *dai,
-			struct snd_pcm_substream *substream)
+snd_pcm_sframes_t snd_soc_dai_delay(struct snd_soc_dai *dai,
+				    struct snd_pcm_substream *substream)
 {
-	int ret = 0;
+	int delay = 0;
 
-	if (dai->driver->ops->prepare)
-		ret = dai->driver->ops->prepare(substream, dai);
+	if (dai->driver->ops &&
+	    dai->driver->ops->delay)
+		delay = dai->driver->ops->delay(substream, dai);
 
-	return ret;
+	return delay;
 }
 
-int snd_soc_dai_trigger(struct snd_soc_dai *dai,
-			struct snd_pcm_substream *substream,
-			int cmd)
+int snd_soc_dai_compress_new(struct snd_soc_dai *dai,
+			     struct snd_soc_pcm_runtime *rtd, int num)
 {
-	int ret = 0;
+	int ret = -ENOTSUPP;
+	if (dai->driver->compress_new)
+		ret = dai->driver->compress_new(rtd, num);
+	return soc_dai_ret(dai, ret);
+}
+
+/*
+ * snd_soc_dai_stream_valid() - check if a DAI supports the given stream
+ *
+ * Returns true if the DAI supports the indicated stream type.
+ */
+bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int dir)
+{
+	struct snd_soc_pcm_stream *stream = snd_soc_dai_get_pcm_stream(dai, dir);
 
-	if (dai->driver->ops->trigger)
-		ret = dai->driver->ops->trigger(substream, cmd, dai);
+	/* If the codec specifies any channels at all, it supports the stream */
+	return stream->channels_min;
+}
 
-	return ret;
+int snd_soc_pcm_dai_probe(struct snd_soc_pcm_runtime *rtd, int order)
+{
+	struct snd_soc_dai *dai;
+	int i;
+
+	for_each_rtd_dais(rtd, i, dai) {
+		if (dai->driver->probe_order != order)
+			continue;
+
+		if (dai->driver->probe) {
+			int ret = dai->driver->probe(dai);
+
+			if (ret < 0)
+				return soc_dai_ret(dai, ret);
+		}
+
+		dai->probed = 1;
+	}
+
+	return 0;
 }
 
-int snd_soc_dai_bespoke_trigger(struct snd_soc_dai *dai,
-				struct snd_pcm_substream *substream,
-				int cmd)
+int snd_soc_pcm_dai_remove(struct snd_soc_pcm_runtime *rtd, int order)
 {
-	int ret = 0;
+	struct snd_soc_dai *dai;
+	int i, r, ret = 0;
+
+	for_each_rtd_dais(rtd, i, dai) {
+		if (dai->driver->remove_order != order)
+			continue;
+
+		if (dai->probed &&
+		    dai->driver->remove) {
+			r = dai->driver->remove(dai);
+			if (r < 0)
+				ret = r; /* use last error */
+		}
 
-	if (dai->driver->ops->bespoke_trigger)
-		ret = dai->driver->ops->bespoke_trigger(substream, cmd, dai);
+		dai->probed = 0;
+	}
 
 	return ret;
 }
 
-snd_pcm_sframes_t snd_soc_dai_delay(struct snd_soc_dai *dai,
-				    struct snd_pcm_substream *substream)
+int snd_soc_pcm_dai_new(struct snd_soc_pcm_runtime *rtd)
 {
-	int delay = 0;
+	struct snd_soc_dai *dai;
+	int i, ret = 0;
+
+	for_each_rtd_dais(rtd, i, dai) {
+		if (dai->driver->pcm_new) {
+			ret = dai->driver->pcm_new(rtd, dai);
+			if (ret < 0)
+				return soc_dai_ret(dai, ret);
+		}
+	}
 
-	if (dai->driver->ops->delay)
-		delay = dai->driver->ops->delay(substream, dai);
+	return 0;
+}
 
-	return delay;
+int snd_soc_pcm_dai_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *dai;
+	int i, ret;
+
+	for_each_rtd_dais(rtd, i, dai) {
+		if (dai->driver->ops &&
+		    dai->driver->ops->prepare) {
+			ret = dai->driver->ops->prepare(substream, dai);
+			if (ret < 0)
+				return soc_dai_ret(dai, ret);
+		}
+	}
+
+	return 0;
 }
 
-int snd_soc_dai_probe(struct snd_soc_dai *dai)
+int snd_soc_pcm_dai_trigger(struct snd_pcm_substream *substream,
+			    int cmd)
 {
-	if (dai->driver->probe)
-		return dai->driver->probe(dai);
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *dai;
+	int i, ret;
+
+	for_each_rtd_dais(rtd, i, dai) {
+		if (dai->driver->ops &&
+		    dai->driver->ops->trigger) {
+			ret = dai->driver->ops->trigger(substream, cmd, dai);
+			if (ret < 0)
+				return soc_dai_ret(dai, ret);
+		}
+	}
+
 	return 0;
 }
 
-int snd_soc_dai_remove(struct snd_soc_dai *dai)
+int snd_soc_pcm_dai_bespoke_trigger(struct snd_pcm_substream *substream,
+				    int cmd)
 {
-	if (dai->driver->remove)
-		return dai->driver->remove(dai);
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *dai;
+	int i, ret;
+
+	for_each_rtd_dais(rtd, i, dai) {
+		if (dai->driver->ops &&
+		    dai->driver->ops->bespoke_trigger) {
+			ret = dai->driver->ops->bespoke_trigger(substream,
+								cmd, dai);
+			if (ret < 0)
+				return soc_dai_ret(dai, ret);
+		}
+	}
+
 	return 0;
 }
 
-int snd_soc_dai_compress_new(struct snd_soc_dai *dai,
-			     struct snd_soc_pcm_runtime *rtd, int num)
+int snd_soc_dai_compr_startup(struct snd_soc_dai *dai,
+			      struct snd_compr_stream *cstream)
 {
-	if (dai->driver->compress_new)
-		return dai->driver->compress_new(rtd, num);
-	return -ENOTSUPP;
+	int ret = 0;
+
+	if (dai->driver->cops &&
+	    dai->driver->cops->startup)
+		ret = dai->driver->cops->startup(cstream, dai);
+
+	return soc_dai_ret(dai, ret);
 }
+EXPORT_SYMBOL_GPL(snd_soc_dai_compr_startup);
 
-/*
- * snd_soc_dai_stream_valid() - check if a DAI supports the given stream
- *
- * Returns true if the DAI supports the indicated stream type.
- */
-bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int dir)
+void snd_soc_dai_compr_shutdown(struct snd_soc_dai *dai,
+				struct snd_compr_stream *cstream)
 {
-	struct snd_soc_pcm_stream *stream = snd_soc_dai_get_pcm_stream(dai, dir);
+	if (dai->driver->cops &&
+	    dai->driver->cops->shutdown)
+		dai->driver->cops->shutdown(cstream, dai);
+}
+EXPORT_SYMBOL_GPL(snd_soc_dai_compr_shutdown);
 
-	/* If the codec specifies any channels at all, it supports the stream */
-	return stream->channels_min;
+int snd_soc_dai_compr_trigger(struct snd_soc_dai *dai,
+			      struct snd_compr_stream *cstream, int cmd)
+{
+	int ret = 0;
+
+	if (dai->driver->cops &&
+	    dai->driver->cops->trigger)
+		ret = dai->driver->cops->trigger(cstream, cmd, dai);
+
+	return soc_dai_ret(dai, ret);
+}
+EXPORT_SYMBOL_GPL(snd_soc_dai_compr_trigger);
+
+int snd_soc_dai_compr_set_params(struct snd_soc_dai *dai,
+				 struct snd_compr_stream *cstream,
+				 struct snd_compr_params *params)
+{
+	int ret = 0;
+
+	if (dai->driver->cops &&
+	    dai->driver->cops->set_params)
+		ret = dai->driver->cops->set_params(cstream, params, dai);
+
+	return soc_dai_ret(dai, ret);
+}
+EXPORT_SYMBOL_GPL(snd_soc_dai_compr_set_params);
+
+int snd_soc_dai_compr_get_params(struct snd_soc_dai *dai,
+				 struct snd_compr_stream *cstream,
+				 struct snd_codec *params)
+{
+	int ret = 0;
+
+	if (dai->driver->cops &&
+	    dai->driver->cops->get_params)
+		ret = dai->driver->cops->get_params(cstream, params, dai);
+
+	return soc_dai_ret(dai, ret);
+}
+EXPORT_SYMBOL_GPL(snd_soc_dai_compr_get_params);
+
+int snd_soc_dai_compr_ack(struct snd_soc_dai *dai,
+			  struct snd_compr_stream *cstream,
+			  size_t bytes)
+{
+	int ret = 0;
+
+	if (dai->driver->cops &&
+	    dai->driver->cops->ack)
+		ret = dai->driver->cops->ack(cstream, bytes, dai);
+
+	return soc_dai_ret(dai, ret);
+}
+EXPORT_SYMBOL_GPL(snd_soc_dai_compr_ack);
+
+int snd_soc_dai_compr_pointer(struct snd_soc_dai *dai,
+			      struct snd_compr_stream *cstream,
+			      struct snd_compr_tstamp *tstamp)
+{
+	int ret = 0;
+
+	if (dai->driver->cops &&
+	    dai->driver->cops->pointer)
+		ret = dai->driver->cops->pointer(cstream, tstamp, dai);
+
+	return soc_dai_ret(dai, ret);
+}
+EXPORT_SYMBOL_GPL(snd_soc_dai_compr_pointer);
+
+int snd_soc_dai_compr_set_metadata(struct snd_soc_dai *dai,
+				   struct snd_compr_stream *cstream,
+				   struct snd_compr_metadata *metadata)
+{
+	int ret = 0;
+
+	if (dai->driver->cops &&
+	    dai->driver->cops->set_metadata)
+		ret = dai->driver->cops->set_metadata(cstream, metadata, dai);
+
+	return soc_dai_ret(dai, ret);
+}
+EXPORT_SYMBOL_GPL(snd_soc_dai_compr_set_metadata);
+
+int snd_soc_dai_compr_get_metadata(struct snd_soc_dai *dai,
+				   struct snd_compr_stream *cstream,
+				   struct snd_compr_metadata *metadata)
+{
+	int ret = 0;
+
+	if (dai->driver->cops &&
+	    dai->driver->cops->get_metadata)
+		ret = dai->driver->cops->get_metadata(cstream, metadata, dai);
+
+	return soc_dai_ret(dai, ret);
 }
+EXPORT_SYMBOL_GPL(snd_soc_dai_compr_get_metadata);
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index e2632841b321..80658d13a855 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -4427,11 +4427,11 @@ void snd_soc_dapm_connect_dai_link_widgets(struct snd_soc_card *card)
 		if (rtd->num_cpus == 1) {
 			for_each_rtd_codec_dais(rtd, i, codec_dai)
 				dapm_connect_dai_pair(card, rtd, codec_dai,
-						      rtd->cpu_dais[0]);
+						      asoc_rtd_to_cpu(rtd, 0));
 		} else if (rtd->num_codecs == rtd->num_cpus) {
 			for_each_rtd_codec_dais(rtd, i, codec_dai)
 				dapm_connect_dai_pair(card, rtd, codec_dai,
-						      rtd->cpu_dais[i]);
+						      asoc_rtd_to_cpu(rtd, i));
 		} else {
 			dev_err(card->dev,
 				"N cpus to M codecs link is not supported yet\n");
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index facf1922a714..f728309a0833 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -68,7 +68,7 @@ int snd_dmaengine_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dma_data = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 
 	ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config);
 	if (ret)
@@ -134,7 +134,7 @@ dmaengine_pcm_set_runtime_hwparams(struct snd_soc_component *component,
 		return snd_soc_set_runtime_hwparams(substream,
 				pcm->config->pcm_hardware);
 
-	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dma_data = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 
 	memset(&hw, 0, sizeof(hw));
 	hw.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
@@ -203,7 +203,7 @@ static struct dma_chan *dmaengine_pcm_compat_request_channel(
 		return NULL;
 	}
 
-	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	dma_data = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
 
 	if ((pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX) && pcm->chan[0])
 		return pcm->chan[0];
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 1f302de44052..440c7e87829a 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -136,7 +136,7 @@ static ssize_t dpcm_state_read_file(struct file *file, char __user *user_buf,
 		return -ENOMEM;
 
 	for_each_pcm_streams(stream)
-		if (snd_soc_dai_stream_valid(fe->cpu_dai, stream))
+		if (snd_soc_dai_stream_valid(asoc_rtd_to_cpu(fe, 0), stream))
 			offset += dpcm_show_state(fe, stream,
 						  buf + offset,
 						  out_count - offset);
@@ -836,10 +836,10 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 	soc_pcm_init_runtime_hw(substream);
 
 	if (rtd->num_codecs == 1)
-		codec_dai_name = rtd->codec_dai->name;
+		codec_dai_name = asoc_rtd_to_codec(rtd, 0)->name;
 
 	if (rtd->num_cpus == 1)
-		cpu_dai_name = rtd->cpu_dai->name;
+		cpu_dai_name = asoc_rtd_to_cpu(rtd, 0)->name;
 
 	if (soc_pcm_has_symmetry(substream))
 		runtime->hw.info |= SNDRV_PCM_INFO_JOINT_DUPLEX;
@@ -950,13 +950,10 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream)
 		}
 	}
 
-	for_each_rtd_dais(rtd, i, dai) {
-		ret = snd_soc_dai_prepare(dai, substream);
-		if (ret < 0) {
-			dev_err(dai->dev,
-				"ASoC: DAI prepare error: %d\n", ret);
-			goto out;
-		}
+	ret = snd_soc_pcm_dai_prepare(substream);
+	if (ret < 0) {
+		dev_err(rtd->dev, "ASoC: DAI prepare error: %d\n", ret);
+		goto out;
 	}
 
 	/* cancel any delayed stream shutdown that is pending */
@@ -1195,7 +1192,6 @@ static int soc_pcm_trigger_start(struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *dai;
 	int i, ret;
 
 	ret = soc_rtd_trigger(rtd, substream, cmd);
@@ -1208,27 +1204,18 @@ static int soc_pcm_trigger_start(struct snd_pcm_substream *substream, int cmd)
 			return ret;
 	}
 
-	for_each_rtd_dais(rtd, i, dai) {
-		ret = snd_soc_dai_trigger(dai, substream, cmd);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
+	return snd_soc_pcm_dai_trigger(substream, cmd);
 }
 
 static int soc_pcm_trigger_stop(struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_component *component;
-	struct snd_soc_dai *dai;
 	int i, ret;
 
-	for_each_rtd_dais(rtd, i, dai) {
-		ret = snd_soc_dai_trigger(dai, substream, cmd);
-		if (ret < 0)
-			return ret;
-	}
+	ret = snd_soc_pcm_dai_trigger(substream, cmd);
+	if (ret < 0)
+		return ret;
 
 	for_each_rtd_components(rtd, i, component) {
 		ret = snd_soc_component_trigger(component, substream, cmd);
@@ -1265,21 +1252,6 @@ static int soc_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	return ret;
 }
 
-static int soc_pcm_bespoke_trigger(struct snd_pcm_substream *substream,
-				   int cmd)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *dai;
-	int i, ret;
-
-	for_each_rtd_dais(rtd, i, dai) {
-		ret = snd_soc_dai_bespoke_trigger(dai, substream, cmd);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
 /*
  * soc level wrapper for pointer callback
  * If cpu_dai, codec_dai, component driver has the delay callback, then
@@ -1483,7 +1455,7 @@ static bool dpcm_end_walk_at_be(struct snd_soc_dapm_widget *widget,
 int dpcm_path_get(struct snd_soc_pcm_runtime *fe,
 	int stream, struct snd_soc_dapm_widget_list **list)
 {
-	struct snd_soc_dai *cpu_dai = fe->cpu_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(fe, 0);
 	int paths;
 
 	if (fe->num_cpus > 1) {
@@ -1842,7 +1814,7 @@ static void dpcm_runtime_merge_chan(struct snd_pcm_substream *substream,
 		 * DAIs connected to a single CPU DAI, use CPU DAI's directly
 		 */
 		if (be->num_codecs == 1) {
-			codec_stream = snd_soc_dai_get_pcm_stream(be->codec_dais[0], stream);
+			codec_stream = snd_soc_dai_get_pcm_stream(asoc_rtd_to_codec(be, 0), stream);
 
 			*channels_min = max(*channels_min,
 					    codec_stream->channels_min);
@@ -2483,7 +2455,7 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
 		dev_dbg(fe->dev, "ASoC: bespoke trigger FE %s cmd %d\n",
 				fe->dai_link->name, cmd);
 
-		ret = soc_pcm_bespoke_trigger(substream, cmd);
+		ret = snd_soc_pcm_dai_bespoke_trigger(substream, cmd);
 		break;
 	default:
 		dev_err(fe->dev, "ASoC: invalid trigger cmd %d for %s\n", cmd,
@@ -2628,7 +2600,7 @@ static int dpcm_run_update_shutdown(struct snd_soc_pcm_runtime *fe, int stream)
 		dev_dbg(fe->dev, "ASoC: bespoke trigger FE %s cmd stop\n",
 				fe->dai_link->name);
 
-		err = soc_pcm_bespoke_trigger(substream, SNDRV_PCM_TRIGGER_STOP);
+		err = snd_soc_pcm_dai_bespoke_trigger(substream, SNDRV_PCM_TRIGGER_STOP);
 		if (err < 0)
 			dev_err(fe->dev,"ASoC: trigger FE failed %d\n", err);
 	} else {
@@ -2706,7 +2678,7 @@ static int dpcm_run_update_startup(struct snd_soc_pcm_runtime *fe, int stream)
 		dev_dbg(fe->dev, "ASoC: bespoke trigger FE %s cmd start\n",
 				fe->dai_link->name);
 
-		ret = soc_pcm_bespoke_trigger(substream, SNDRV_PCM_TRIGGER_START);
+		ret = snd_soc_pcm_dai_bespoke_trigger(substream, SNDRV_PCM_TRIGGER_START);
 		if (ret < 0) {
 			dev_err(fe->dev,"ASoC: bespoke trigger FE failed %d\n", ret);
 			goto hw_free;
@@ -2759,7 +2731,7 @@ static int soc_dpcm_fe_runtime_update(struct snd_soc_pcm_runtime *fe, int new)
 		return 0;
 
 	/* only check active links */
-	if (!fe->cpu_dai->active)
+	if (!asoc_rtd_to_cpu(fe, 0)->active)
 		return 0;
 
 	/* DAPM sync will call this to update DSP paths */
@@ -2769,13 +2741,13 @@ static int soc_dpcm_fe_runtime_update(struct snd_soc_pcm_runtime *fe, int new)
 	for_each_pcm_streams(stream) {
 
 		/* skip if FE doesn't have playback/capture capability */
-		if (!snd_soc_dai_stream_valid(fe->cpu_dai,   stream) ||
-		    !snd_soc_dai_stream_valid(fe->codec_dai, stream))
+		if (!snd_soc_dai_stream_valid(asoc_rtd_to_cpu(fe, 0),   stream) ||
+		    !snd_soc_dai_stream_valid(asoc_rtd_to_codec(fe, 0), stream))
 			continue;
 
 		/* skip if FE isn't currently playing/capturing */
-		if (!fe->cpu_dai->stream_active[stream] ||
-		    !fe->codec_dai->stream_active[stream])
+		if (!asoc_rtd_to_cpu(fe, 0)->stream_active[stream] ||
+		    !asoc_rtd_to_codec(fe, 0)->stream_active[stream])
 			continue;
 
 		paths = dpcm_path_get(fe, stream, &list);
@@ -2931,9 +2903,9 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
 
 		for_each_rtd_codec_dais(rtd, i, codec_dai) {
 			if (rtd->num_cpus == 1) {
-				cpu_dai = rtd->cpu_dais[0];
+				cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 			} else if (rtd->num_cpus == rtd->num_codecs) {
-				cpu_dai = rtd->cpu_dais[i];
+				cpu_dai = asoc_rtd_to_cpu(rtd, i);
 			} else {
 				dev_err(rtd->card->dev,
 					"N cpus to M codecs link is not supported yet\n");
@@ -2980,7 +2952,7 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
 			snprintf(new_name, sizeof(new_name), "%s %s-%d",
 				rtd->dai_link->stream_name,
 				(rtd->num_codecs > 1) ?
-				"multicodec" : rtd->codec_dai->name, num);
+				"multicodec" : asoc_rtd_to_codec(rtd, 0)->name, num);
 
 		ret = snd_pcm_new(rtd->card->snd_card, new_name, num, playback,
 			capture, &pcm);
@@ -3059,8 +3031,8 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
 	pcm->no_device_suspend = true;
 out:
 	dev_info(rtd->card->dev, "%s <-> %s mapping ok\n",
-		 (rtd->num_codecs > 1) ? "multicodec" : rtd->codec_dai->name,
-		 (rtd->num_cpus > 1) ? "multicpu" : rtd->cpu_dai->name);
+		 (rtd->num_codecs > 1) ? "multicodec" : asoc_rtd_to_codec(rtd, 0)->name,
+		 (rtd->num_cpus > 1)   ? "multicpu"   : asoc_rtd_to_cpu(rtd, 0)->name);
 	return ret;
 }
 
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 6df3b0d12d87..49875978a1ce 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2390,7 +2390,7 @@ static int soc_tplg_link_elems_load(struct soc_tplg *tplg,
 		tplg->pos += le32_to_cpu(hdr->size) +
 			le32_to_cpu(hdr->payload_size);
 		return 0;
-	};
+	}
 
 	/* check the element size and count */
 	link = (struct snd_soc_tplg_link_config *)tplg->pos;
diff --git a/sound/soc/sof/compress.c b/sound/soc/sof/compress.c
index 7354dc6a49cf..7294451cd67c 100644
--- a/sound/soc/sof/compress.c
+++ b/sound/soc/sof/compress.c
@@ -13,7 +13,7 @@
 #include "ops.h"
 #include "probe.h"
 
-struct snd_compr_ops sof_probe_compressed_ops = {
+struct snd_compress_ops sof_probe_compressed_ops = {
 	.copy		= sof_probe_compr_copy,
 };
 EXPORT_SYMBOL(sof_probe_compressed_ops);
@@ -117,8 +117,9 @@ int sof_probe_compr_pointer(struct snd_compr_stream *cstream,
 }
 EXPORT_SYMBOL(sof_probe_compr_pointer);
 
-int sof_probe_compr_copy(struct snd_compr_stream *cstream,
-		char __user *buf, size_t count)
+int sof_probe_compr_copy(struct snd_soc_component *component,
+			 struct snd_compr_stream *cstream,
+			 char __user *buf, size_t count)
 {
 	struct snd_compr_runtime *rtd = cstream->runtime;
 	unsigned int offset, n;
diff --git a/sound/soc/sof/compress.h b/sound/soc/sof/compress.h
index 800f163603e1..0386844c0bf5 100644
--- a/sound/soc/sof/compress.h
+++ b/sound/soc/sof/compress.h
@@ -13,7 +13,7 @@
 
 #include <sound/compress_driver.h>
 
-extern struct snd_compr_ops sof_probe_compressed_ops;
+extern struct snd_compress_ops sof_probe_compressed_ops;
 
 int sof_probe_compr_open(struct snd_compr_stream *cstream,
 		struct snd_soc_dai *dai);
@@ -25,7 +25,8 @@ int sof_probe_compr_trigger(struct snd_compr_stream *cstream, int cmd,
 		struct snd_soc_dai *dai);
 int sof_probe_compr_pointer(struct snd_compr_stream *cstream,
 		struct snd_compr_tstamp *tstamp, struct snd_soc_dai *dai);
-int sof_probe_compr_copy(struct snd_compr_stream *cstream,
-		char __user *buf, size_t count);
+int sof_probe_compr_copy(struct snd_soc_component *component,
+			 struct snd_compr_stream *cstream,
+			 char __user *buf, size_t count);
 
 #endif
diff --git a/sound/soc/sof/imx/Kconfig b/sound/soc/sof/imx/Kconfig
index bae4f7bf5f75..f76660e91382 100644
--- a/sound/soc/sof/imx/Kconfig
+++ b/sound/soc/sof/imx/Kconfig
@@ -11,17 +11,42 @@ config SND_SOC_SOF_IMX_TOPLEVEL
 
 if SND_SOC_SOF_IMX_TOPLEVEL
 
+config SND_SOC_SOF_IMX_OF
+	def_tristate SND_SOC_SOF_OF
+	select SND_SOC_SOF_IMX8 if SND_SOC_SOF_IMX8_SUPPORT
+	select SND_SOC_SOF_IMX8M if SND_SOC_SOF_IMX8M_SUPPORT
+	help
+	  This option is not user-selectable but automagically handled by
+	  'select' statements at a higher level
+
 config SND_SOC_SOF_IMX8_SUPPORT
 	bool "SOF support for i.MX8"
 	depends on IMX_SCU
-	depends on IMX_DSP
 	help
 	  This adds support for Sound Open Firmware for NXP i.MX8 platforms
 	  Say Y if you have such a device.
 	  If unsure select "N".
 
 config SND_SOC_SOF_IMX8
-	def_tristate SND_SOC_SOF_OF
-	depends on SND_SOC_SOF_IMX8_SUPPORT
+	tristate
+	depends on IMX_SCU
+	select IMX_DSP
+	help
+	  This option is not user-selectable but automagically handled by
+	  'select' statements at a higher level
+
+config SND_SOC_SOF_IMX8M_SUPPORT
+	bool "SOF support for i.MX8M"
+	help
+	  This adds support for Sound Open Firmware for NXP i.MX8M platforms
+	  Say Y if you have such a device.
+	  If unsure select "N".
+
+config SND_SOC_SOF_IMX8M
+	tristate
+	depends on IMX_DSP
+	help
+	  This option is not user-selectable but automagically handled by
+	  'select' statements at a higher level
 
 endif ## SND_SOC_SOF_IMX_IMX_TOPLEVEL
diff --git a/sound/soc/sof/imx/Makefile b/sound/soc/sof/imx/Makefile
index 6ef908e8c807..d9d8dc1765b8 100644
--- a/sound/soc/sof/imx/Makefile
+++ b/sound/soc/sof/imx/Makefile
@@ -1,4 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 snd-sof-imx8-objs := imx8.o
+snd-sof-imx8m-objs := imx8m.o
 
 obj-$(CONFIG_SND_SOC_SOF_IMX8) += snd-sof-imx8.o
+obj-$(CONFIG_SND_SOC_SOF_IMX8M) += snd-sof-imx8m.o
diff --git a/sound/soc/sof/imx/imx8m.c b/sound/soc/sof/imx/imx8m.c
new file mode 100644
index 000000000000..07451ba4efae
--- /dev/null
+++ b/sound/soc/sof/imx/imx8m.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// Copyright 2020 NXP
+//
+// Author: Daniel Baluta <daniel.baluta@nxp.com>
+//
+// Hardware interface for audio DSP on i.MX8M
+
+#include <linux/firmware.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <linux/module.h>
+#include <sound/sof.h>
+#include <sound/sof/xtensa.h>
+#include <linux/firmware/imx/dsp.h>
+
+#include "../ops.h"
+
+#define MBOX_OFFSET	0x800000
+#define MBOX_SIZE	0x1000
+
+struct imx8m_priv {
+	struct device *dev;
+	struct snd_sof_dev *sdev;
+
+	/* DSP IPC handler */
+	struct imx_dsp_ipc *dsp_ipc;
+	struct platform_device *ipc_dev;
+};
+
+static void imx8m_get_reply(struct snd_sof_dev *sdev)
+{
+	struct snd_sof_ipc_msg *msg = sdev->msg;
+	struct sof_ipc_reply reply;
+	int ret = 0;
+
+	if (!msg) {
+		dev_warn(sdev->dev, "unexpected ipc interrupt\n");
+		return;
+	}
+
+	/* get reply */
+	sof_mailbox_read(sdev, sdev->host_box.offset, &reply, sizeof(reply));
+
+	if (reply.error < 0) {
+		memcpy(msg->reply_data, &reply, sizeof(reply));
+		ret = reply.error;
+	} else {
+		/* reply has correct size? */
+		if (reply.hdr.size != msg->reply_size) {
+			dev_err(sdev->dev, "error: reply expected %zu got %u bytes\n",
+				msg->reply_size, reply.hdr.size);
+			ret = -EINVAL;
+		}
+
+		/* read the message */
+		if (msg->reply_size > 0)
+			sof_mailbox_read(sdev, sdev->host_box.offset,
+					 msg->reply_data, msg->reply_size);
+	}
+
+	msg->reply_error = ret;
+}
+
+static int imx8m_get_mailbox_offset(struct snd_sof_dev *sdev)
+{
+	return MBOX_OFFSET;
+}
+
+static int imx8m_get_window_offset(struct snd_sof_dev *sdev, u32 id)
+{
+	return MBOX_OFFSET;
+}
+
+static void imx8m_dsp_handle_reply(struct imx_dsp_ipc *ipc)
+{
+	struct imx8m_priv *priv = imx_dsp_get_data(ipc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
+	imx8m_get_reply(priv->sdev);
+	snd_sof_ipc_reply(priv->sdev, 0);
+	spin_unlock_irqrestore(&priv->sdev->ipc_lock, flags);
+}
+
+static void imx8m_dsp_handle_request(struct imx_dsp_ipc *ipc)
+{
+	struct imx8m_priv *priv = imx_dsp_get_data(ipc);
+
+	snd_sof_ipc_msgs_rx(priv->sdev);
+}
+
+struct imx_dsp_ops imx8m_dsp_ops = {
+	.handle_reply		= imx8m_dsp_handle_reply,
+	.handle_request		= imx8m_dsp_handle_request,
+};
+
+static int imx8m_send_msg(struct snd_sof_dev *sdev, struct snd_sof_ipc_msg *msg)
+{
+	struct imx8m_priv *priv = (struct imx8m_priv *)sdev->private;
+
+	sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
+			  msg->msg_size);
+	imx_dsp_ring_doorbell(priv->dsp_ipc, 0);
+
+	return 0;
+}
+
+/*
+ * DSP control.
+ */
+static int imx8m_run(struct snd_sof_dev *sdev)
+{
+	/* TODO: start DSP using Audio MIX bits */
+	return 0;
+}
+
+static int imx8m_probe(struct snd_sof_dev *sdev)
+{
+	struct platform_device *pdev =
+		container_of(sdev->dev, struct platform_device, dev);
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *res_node;
+	struct resource *mmio;
+	struct imx8m_priv *priv;
+	struct resource res;
+	u32 base, size;
+	int ret = 0;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	sdev->private = priv;
+	priv->dev = sdev->dev;
+	priv->sdev = sdev;
+
+	priv->ipc_dev = platform_device_register_data(sdev->dev, "imx-dsp",
+						      PLATFORM_DEVID_NONE,
+						      pdev, sizeof(*pdev));
+	if (IS_ERR(priv->ipc_dev))
+		return PTR_ERR(priv->ipc_dev);
+
+	priv->dsp_ipc = dev_get_drvdata(&priv->ipc_dev->dev);
+	if (!priv->dsp_ipc) {
+		/* DSP IPC driver not probed yet, try later */
+		ret = -EPROBE_DEFER;
+		dev_err(sdev->dev, "Failed to get drvdata\n");
+		goto exit_pdev_unregister;
+	}
+
+	imx_dsp_set_data(priv->dsp_ipc, priv);
+	priv->dsp_ipc->ops = &imx8m_dsp_ops;
+
+	/* DSP base */
+	mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mmio) {
+		base = mmio->start;
+		size = resource_size(mmio);
+	} else {
+		dev_err(sdev->dev, "error: failed to get DSP base at idx 0\n");
+		ret = -EINVAL;
+		goto exit_pdev_unregister;
+	}
+
+	sdev->bar[SOF_FW_BLK_TYPE_IRAM] = devm_ioremap(sdev->dev, base, size);
+	if (!sdev->bar[SOF_FW_BLK_TYPE_IRAM]) {
+		dev_err(sdev->dev, "failed to ioremap base 0x%x size 0x%x\n",
+			base, size);
+		ret = -ENODEV;
+		goto exit_pdev_unregister;
+	}
+	sdev->mmio_bar = SOF_FW_BLK_TYPE_IRAM;
+
+	res_node = of_parse_phandle(np, "memory-region", 0);
+	if (!res_node) {
+		dev_err(&pdev->dev, "failed to get memory region node\n");
+		ret = -ENODEV;
+		goto exit_pdev_unregister;
+	}
+
+	ret = of_address_to_resource(res_node, 0, &res);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get reserved region address\n");
+		goto exit_pdev_unregister;
+	}
+
+	sdev->bar[SOF_FW_BLK_TYPE_SRAM] = devm_ioremap_wc(sdev->dev, res.start,
+							  res.end - res.start +
+							  1);
+	if (!sdev->bar[SOF_FW_BLK_TYPE_SRAM]) {
+		dev_err(sdev->dev, "failed to ioremap mem 0x%x size 0x%x\n",
+			base, size);
+		ret = -ENOMEM;
+		goto exit_pdev_unregister;
+	}
+	sdev->mailbox_bar = SOF_FW_BLK_TYPE_SRAM;
+
+	/* set default mailbox offset for FW ready message */
+	sdev->dsp_box.offset = MBOX_OFFSET;
+
+	return 0;
+
+exit_pdev_unregister:
+	platform_device_unregister(priv->ipc_dev);
+	return ret;
+}
+
+static int imx8m_remove(struct snd_sof_dev *sdev)
+{
+	struct imx8m_priv *priv = (struct imx8m_priv *)sdev->private;
+
+	platform_device_unregister(priv->ipc_dev);
+
+	return 0;
+}
+
+/* on i.MX8 there is 1 to 1 match between type and BAR idx */
+static int imx8m_get_bar_index(struct snd_sof_dev *sdev, u32 type)
+{
+	return type;
+}
+
+static void imx8m_ipc_msg_data(struct snd_sof_dev *sdev,
+			       struct snd_pcm_substream *substream,
+			       void *p, size_t sz)
+{
+	sof_mailbox_read(sdev, sdev->dsp_box.offset, p, sz);
+}
+
+static int imx8m_ipc_pcm_params(struct snd_sof_dev *sdev,
+				struct snd_pcm_substream *substream,
+				const struct sof_ipc_pcm_params_reply *reply)
+{
+	return 0;
+}
+
+static struct snd_soc_dai_driver imx8m_dai[] = {
+{
+	.name = "sai-port",
+},
+};
+
+/* i.MX8 ops */
+struct snd_sof_dsp_ops sof_imx8m_ops = {
+	/* probe and remove */
+	.probe		= imx8m_probe,
+	.remove		= imx8m_remove,
+	/* DSP core boot */
+	.run		= imx8m_run,
+
+	/* Block IO */
+	.block_read	= sof_block_read,
+	.block_write	= sof_block_write,
+
+	/* ipc */
+	.send_msg	= imx8m_send_msg,
+	.fw_ready	= sof_fw_ready,
+	.get_mailbox_offset	= imx8m_get_mailbox_offset,
+	.get_window_offset	= imx8m_get_window_offset,
+
+	.ipc_msg_data	= imx8m_ipc_msg_data,
+	.ipc_pcm_params	= imx8m_ipc_pcm_params,
+
+	/* module loading */
+	.load_module	= snd_sof_parse_module_memcpy,
+	.get_bar_index	= imx8m_get_bar_index,
+	/* firmware loading */
+	.load_firmware	= snd_sof_load_firmware_memcpy,
+
+	/* DAI drivers */
+	.drv = imx8m_dai,
+	.num_drv = 1, /* we have only 1 SAI interface on i.MX8M */
+};
+EXPORT_SYMBOL(sof_imx8m_ops);
+
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c
index 3041fbbb010a..7e7e296a3953 100644
--- a/sound/soc/sof/intel/hda-codec.c
+++ b/sound/soc/sof/intel/hda-codec.c
@@ -207,7 +207,6 @@ EXPORT_SYMBOL_NS(hda_codec_i915_init, SND_SOC_SOF_HDA_AUDIO_CODEC_I915);
 int hda_codec_i915_exit(struct snd_sof_dev *sdev)
 {
 	struct hdac_bus *bus = sof_to_bus(sdev);
-	int ret;
 
 	if (!bus->audio_component)
 		return 0;
@@ -215,9 +214,7 @@ int hda_codec_i915_exit(struct snd_sof_dev *sdev)
 	/* power down unconditionally */
 	snd_hdac_display_power(bus, HDA_CODEC_IDX_CONTROLLER, false);
 
-	ret = snd_hdac_i915_exit(bus);
-
-	return ret;
+	return snd_hdac_i915_exit(bus);
 }
 EXPORT_SYMBOL_NS(hda_codec_i915_exit, SND_SOC_SOF_HDA_AUDIO_CODEC_I915);
 
diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c
index 99087b6afb67..c780e1e6f895 100644
--- a/sound/soc/sof/intel/hda-dsp.c
+++ b/sound/soc/sof/intel/hda-dsp.c
@@ -226,10 +226,10 @@ bool hda_dsp_core_is_enabled(struct snd_sof_dev *sdev,
 
 	val = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS);
 
-	is_enable = ((val & HDA_DSP_ADSPCS_CPA_MASK(core_mask)) &&
-			(val & HDA_DSP_ADSPCS_SPA_MASK(core_mask)) &&
-			!(val & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) &&
-			!(val & HDA_DSP_ADSPCS_CSTALL_MASK(core_mask)));
+	is_enable = (val & HDA_DSP_ADSPCS_CPA_MASK(core_mask)) &&
+		    (val & HDA_DSP_ADSPCS_SPA_MASK(core_mask)) &&
+		    !(val & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) &&
+		    !(val & HDA_DSP_ADSPCS_CSTALL_MASK(core_mask));
 
 	dev_dbg(sdev->dev, "DSP core(s) enabled? %d : core_mask %x\n",
 		is_enable, core_mask);
diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
index e1550ccd0a49..1beaaf5879e2 100644
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -293,8 +293,13 @@ int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev)
 
 	chip_info = desc->chip_info;
 
-	stripped_firmware.data = plat_data->fw->data;
-	stripped_firmware.size = plat_data->fw->size;
+	if (plat_data->fw->size < plat_data->fw_offset) {
+		dev_err(sdev->dev, "error: firmware size must be greater than firmware offset\n");
+		return -EINVAL;
+	}
+
+	stripped_firmware.data = plat_data->fw->data + plat_data->fw_offset;
+	stripped_firmware.size = plat_data->fw->size - plat_data->fw_offset;
 
 	/* init for booting wait */
 	init_waitqueue_head(&sdev->boot_wait);
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 211e91e79eae..337dce3b5def 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -135,10 +135,8 @@ static int hda_sdw_acpi_scan(struct snd_sof_dev *sdev)
 	hdev = sdev->pdata->hw_pdata;
 
 	ret = sdw_intel_acpi_scan(handle, &hdev->info);
-	if (ret < 0) {
-		dev_err(sdev->dev, "%s failed\n", __func__);
+	if (ret < 0)
 		return -EINVAL;
-	}
 
 	return 0;
 }
@@ -282,6 +280,10 @@ module_param_named(use_msi, hda_use_msi, bool, 0444);
 MODULE_PARM_DESC(use_msi, "SOF HDA use PCI MSI mode");
 #endif
 
+static char *hda_model;
+module_param(hda_model, charp, 0444);
+MODULE_PARM_DESC(hda_model, "Use the given HDA board model.");
+
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 static int hda_dmic_num = -1;
 module_param_named(dmic_num, hda_dmic_num, int, 0444);
@@ -503,7 +505,7 @@ static int hda_init(struct snd_sof_dev *sdev)
 	mutex_init(&hbus->prepare_mutex);
 	hbus->pci = pci;
 	hbus->mixer_assigned = -1;
-	hbus->modelname = "sofbus";
+	hbus->modelname = hda_model;
 
 	/* initialise hdac bus */
 	bus->addr = pci_resource_start(pci, 0);
@@ -604,7 +606,7 @@ static int hda_init_caps(struct snd_sof_dev *sdev)
 	/* scan SoundWire capabilities exposed by DSDT */
 	ret = hda_sdw_acpi_scan(sdev);
 	if (ret < 0) {
-		dev_dbg(sdev->dev, "skipping SoundWire, ACPI scan error\n");
+		dev_dbg(sdev->dev, "skipping SoundWire, not detected with ACPI scan\n");
 		goto skip_soundwire;
 	}
 
@@ -1008,6 +1010,10 @@ static int hda_generic_machine_select(struct snd_sof_dev *sdev)
 			if (!tplg_filename)
 				return -EINVAL;
 
+			dev_info(bus->dev,
+				 "DMICs detected in NHLT tables: %d\n",
+				 dmic_num);
+
 			pdata->machine = hda_mach;
 			pdata->tplg_filename = tplg_filename;
 		}
diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c
index 64af08293daa..89f35db2577d 100644
--- a/sound/soc/sof/loader.c
+++ b/sound/soc/sof/loader.c
@@ -15,9 +15,9 @@
 #include "ops.h"
 
 static int get_ext_windows(struct snd_sof_dev *sdev,
-			   struct sof_ipc_ext_data_hdr *ext_hdr)
+			   const struct sof_ipc_ext_data_hdr *ext_hdr)
 {
-	struct sof_ipc_window *w =
+	const struct sof_ipc_window *w =
 		container_of(ext_hdr, struct sof_ipc_window, ext_hdr);
 
 	if (w->num_windows == 0 || w->num_windows > SOF_IPC_MAX_ELEMS)
@@ -33,11 +33,11 @@ static int get_ext_windows(struct snd_sof_dev *sdev,
 }
 
 static int get_cc_info(struct snd_sof_dev *sdev,
-		       struct sof_ipc_ext_data_hdr *ext_hdr)
+		       const struct sof_ipc_ext_data_hdr *ext_hdr)
 {
 	int ret;
 
-	struct sof_ipc_cc_version *cc =
+	const struct sof_ipc_cc_version *cc =
 		container_of(ext_hdr, struct sof_ipc_cc_version, ext_hdr);
 
 	dev_dbg(sdev->dev, "Firmware info: used compiler %s %d:%d:%d%s used optimization flags %s\n",
@@ -379,12 +379,19 @@ int snd_sof_parse_module_memcpy(struct snd_sof_dev *sdev,
 }
 EXPORT_SYMBOL(snd_sof_parse_module_memcpy);
 
-static int check_header(struct snd_sof_dev *sdev, const struct firmware *fw)
+static int check_header(struct snd_sof_dev *sdev, const struct firmware *fw,
+			size_t fw_offset)
 {
 	struct snd_sof_fw_header *header;
+	size_t fw_size = fw->size - fw_offset;
+
+	if (fw->size < fw_offset) {
+		dev_err(sdev->dev, "error: firmware size must be greater than firmware offset\n");
+		return -EINVAL;
+	}
 
 	/* Read the header information from the data pointer */
-	header = (struct snd_sof_fw_header *)fw->data;
+	header = (struct snd_sof_fw_header *)(fw->data + fw_offset);
 
 	/* verify FW sig */
 	if (strncmp(header->sig, SND_SOF_FW_SIG, SND_SOF_FW_SIG_SIZE) != 0) {
@@ -393,9 +400,9 @@ static int check_header(struct snd_sof_dev *sdev, const struct firmware *fw)
 	}
 
 	/* check size is valid */
-	if (fw->size != header->file_size + sizeof(*header)) {
+	if (fw_size != header->file_size + sizeof(*header)) {
 		dev_err(sdev->dev, "error: invalid filesize mismatch got 0x%zx expected 0x%zx\n",
-			fw->size, header->file_size + sizeof(*header));
+			fw_size, header->file_size + sizeof(*header));
 		return -EINVAL;
 	}
 
@@ -406,7 +413,8 @@ static int check_header(struct snd_sof_dev *sdev, const struct firmware *fw)
 	return 0;
 }
 
-static int load_modules(struct snd_sof_dev *sdev, const struct firmware *fw)
+static int load_modules(struct snd_sof_dev *sdev, const struct firmware *fw,
+			size_t fw_offset)
 {
 	struct snd_sof_fw_header *header;
 	struct snd_sof_mod_hdr *module;
@@ -415,14 +423,15 @@ static int load_modules(struct snd_sof_dev *sdev, const struct firmware *fw)
 	int ret, count;
 	size_t remaining;
 
-	header = (struct snd_sof_fw_header *)fw->data;
+	header = (struct snd_sof_fw_header *)(fw->data + fw_offset);
 	load_module = sof_ops(sdev)->load_module;
 	if (!load_module)
 		return -EINVAL;
 
 	/* parse each module */
-	module = (struct snd_sof_mod_hdr *)((u8 *)(fw->data) + sizeof(*header));
-	remaining = fw->size - sizeof(*header);
+	module = (struct snd_sof_mod_hdr *)(fw->data + fw_offset +
+					    sizeof(*header));
+	remaining = fw->size - sizeof(*header) - fw_offset;
 	/* check for wrap */
 	if (remaining > fw->size) {
 		dev_err(sdev->dev, "error: fw size smaller than header size\n");
@@ -502,7 +511,7 @@ int snd_sof_load_firmware_memcpy(struct snd_sof_dev *sdev)
 		return ret;
 
 	/* make sure the FW header and file is valid */
-	ret = check_header(sdev, plat_data->fw);
+	ret = check_header(sdev, plat_data->fw, plat_data->fw_offset);
 	if (ret < 0) {
 		dev_err(sdev->dev, "error: invalid FW header\n");
 		goto error;
@@ -516,7 +525,7 @@ int snd_sof_load_firmware_memcpy(struct snd_sof_dev *sdev)
 	}
 
 	/* parse and load firmware modules to DSP */
-	ret = load_modules(sdev, plat_data->fw);
+	ret = load_modules(sdev, plat_data->fw, plat_data->fw_offset);
 	if (ret < 0) {
 		dev_err(sdev->dev, "error: invalid FW modules\n");
 		goto error;
diff --git a/sound/soc/sof/nocodec.c b/sound/soc/sof/nocodec.c
index 2233146386cc..5bf67b2aa4e7 100644
--- a/sound/soc/sof/nocodec.c
+++ b/sound/soc/sof/nocodec.c
@@ -66,7 +66,6 @@ int sof_nocodec_setup(struct device *dev,
 		      const struct snd_sof_dsp_ops *ops)
 {
 	struct snd_soc_dai_link *links;
-	int ret;
 
 	/* create dummy BE dai_links */
 	links = devm_kzalloc(dev, sizeof(struct snd_soc_dai_link) *
@@ -74,9 +73,8 @@ int sof_nocodec_setup(struct device *dev,
 	if (!links)
 		return -ENOMEM;
 
-	ret = sof_nocodec_bes_setup(dev, ops, links, ops->num_drv,
-				    &sof_nocodec_card);
-	return ret;
+	return sof_nocodec_bes_setup(dev, ops, links, ops->num_drv,
+				     &sof_nocodec_card);
 }
 EXPORT_SYMBOL(sof_nocodec_setup);
 
diff --git a/sound/soc/sof/pcm.c b/sound/soc/sof/pcm.c
index 47cd741f2a8c..0885826adb6c 100644
--- a/sound/soc/sof/pcm.c
+++ b/sound/soc/sof/pcm.c
@@ -785,11 +785,11 @@ void snd_sof_new_platform_drv(struct snd_sof_dev *sdev)
 	pd->pointer = sof_pcm_pointer;
 
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_COMPRESS)
-	pd->compr_ops = &sof_compressed_ops;
+	pd->compress_ops = &sof_compressed_ops;
 #endif
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
 	/* override cops when probe support is enabled */
-	pd->compr_ops = &sof_probe_compressed_ops;
+	pd->compress_ops = &sof_probe_compressed_ops;
 #endif
 	pd->pcm_construct = sof_pcm_new;
 	pd->ignore_machine = drv_name;
diff --git a/sound/soc/sof/probe.h b/sound/soc/sof/probe.h
index 45daa5552834..250c4817f637 100644
--- a/sound/soc/sof/probe.h
+++ b/sound/soc/sof/probe.h
@@ -36,7 +36,7 @@ struct sof_probe_point_desc {
 struct sof_ipc_probe_dma_add_params {
 	struct sof_ipc_cmd_hdr hdr;
 	unsigned int num_elems;
-	struct sof_probe_dma dma[0];
+	struct sof_probe_dma dma[];
 } __packed;
 
 struct sof_ipc_probe_info_params {
@@ -51,19 +51,19 @@ struct sof_ipc_probe_info_params {
 struct sof_ipc_probe_dma_remove_params {
 	struct sof_ipc_cmd_hdr hdr;
 	unsigned int num_elems;
-	unsigned int stream_tag[0];
+	unsigned int stream_tag[];
 } __packed;
 
 struct sof_ipc_probe_point_add_params {
 	struct sof_ipc_cmd_hdr hdr;
 	unsigned int num_elems;
-	struct sof_probe_point_desc desc[0];
+	struct sof_probe_point_desc desc[];
 } __packed;
 
 struct sof_ipc_probe_point_remove_params {
 	struct sof_ipc_cmd_hdr hdr;
 	unsigned int num_elems;
-	unsigned int buffer_id[0];
+	unsigned int buffer_id[];
 } __packed;
 
 int sof_ipc_probe_init(struct snd_sof_dev *sdev,
diff --git a/sound/soc/sof/sof-of-dev.c b/sound/soc/sof/sof-of-dev.c
index 16e49f2ee629..c6167597d6fe 100644
--- a/sound/soc/sof/sof-of-dev.c
+++ b/sound/soc/sof/sof-of-dev.c
@@ -14,6 +14,7 @@
 
 extern struct snd_sof_dsp_ops sof_imx8_ops;
 extern struct snd_sof_dsp_ops sof_imx8x_ops;
+extern struct snd_sof_dsp_ops sof_imx8m_ops;
 
 /* platform specific devices */
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_IMX8)
@@ -34,6 +35,16 @@ static struct sof_dev_desc sof_of_imx8qm_desc = {
 };
 #endif
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_IMX8M)
+static struct sof_dev_desc sof_of_imx8mp_desc = {
+	.default_fw_path = "imx/sof",
+	.default_tplg_path = "imx/sof-tplg",
+	.default_fw_filename = "sof-imx8m.ri",
+	.nocodec_tplg_filename = "sof-imx8-nocodec.tplg",
+	.ops = &sof_imx8m_ops,
+};
+#endif
+
 static const struct dev_pm_ops sof_of_pm = {
 	SET_SYSTEM_SLEEP_PM_OPS(snd_sof_suspend, snd_sof_resume)
 	SET_RUNTIME_PM_OPS(snd_sof_runtime_suspend, snd_sof_runtime_resume,
@@ -113,6 +124,9 @@ static const struct of_device_id sof_of_ids[] = {
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_IMX8)
 	{ .compatible = "fsl,imx8qxp-dsp", .data = &sof_of_imx8qxp_desc},
 	{ .compatible = "fsl,imx8qm-dsp", .data = &sof_of_imx8qm_desc},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_IMX8M)
+	{ .compatible = "fsl,imx8mp-dsp", .data = &sof_of_imx8mp_desc},
 #endif
 	{ }
 };
diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index cec631a1389b..b5f0221d624f 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -435,6 +435,8 @@ static const struct pci_device_id sof_pci_ids[] = {
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_ELKHARTLAKE)
 	{ PCI_DEVICE(0x8086, 0x4b55),
 		.driver_data = (unsigned long)&ehl_desc},
+	{ PCI_DEVICE(0x8086, 0x4b58),
+		.driver_data = (unsigned long)&ehl_desc},
 #endif
 	{ 0, }
 };
diff --git a/sound/soc/sof/sof-priv.h b/sound/soc/sof/sof-priv.h
index a4b297c842df..965b9da696d5 100644
--- a/sound/soc/sof/sof-priv.h
+++ b/sound/soc/sof/sof-priv.h
@@ -522,7 +522,7 @@ void snd_sof_handle_fw_exception(struct snd_sof_dev *sdev);
 /*
  * Platform specific ops.
  */
-extern struct snd_compr_ops sof_compressed_ops;
+extern struct snd_compress_ops sof_compressed_ops;
 
 /*
  * DSP Architectures.
diff --git a/sound/soc/sof/topology.c b/sound/soc/sof/topology.c
index fe8ba3e05e08..e88ffc25025f 100644
--- a/sound/soc/sof/topology.c
+++ b/sound/soc/sof/topology.c
@@ -430,6 +430,7 @@ static const struct sof_process_types sof_process[] = {
 	{"CHAN_SELECTOR", SOF_PROCESS_CHAN_SELECTOR, SOF_COMP_SELECTOR},
 	{"MUX", SOF_PROCESS_MUX, SOF_COMP_MUX},
 	{"DEMUX", SOF_PROCESS_DEMUX, SOF_COMP_DEMUX},
+	{"DCBLOCK", SOF_PROCESS_DCBLOCK, SOF_COMP_DCBLOCK},
 };
 
 static enum sof_ipc_process_type find_process(const char *name)
@@ -655,6 +656,16 @@ static const struct sof_topology_token ssp_tokens[] = {
 
 };
 
+/* ALH */
+static const struct sof_topology_token alh_tokens[] = {
+	{SOF_TKN_INTEL_ALH_RATE,
+		SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32,
+		offsetof(struct sof_ipc_dai_alh_params, rate), 0},
+	{SOF_TKN_INTEL_ALH_CH,
+		SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32,
+		offsetof(struct sof_ipc_dai_alh_params, channels), 0},
+};
+
 /* DMIC */
 static const struct sof_topology_token dmic_tokens[] = {
 	{SOF_TKN_INTEL_DMIC_DRIVER_VERSION,
@@ -742,6 +753,12 @@ static const struct sof_topology_token dmic_pdm_tokens[] = {
 
 /* HDA */
 static const struct sof_topology_token hda_tokens[] = {
+	{SOF_TKN_INTEL_HDA_RATE,
+		SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32,
+		offsetof(struct sof_ipc_dai_hda_params, rate), 0},
+	{SOF_TKN_INTEL_HDA_CH,
+		SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32,
+		offsetof(struct sof_ipc_dai_hda_params, channels), 0},
 };
 
 /* Leds */
@@ -752,13 +769,15 @@ static const struct sof_topology_token led_tokens[] = {
 	 get_token_u32, offsetof(struct snd_sof_led_control, direction), 0},
 };
 
-static void sof_parse_uuid_tokens(struct snd_soc_component *scomp,
-				  void *object,
-				  const struct sof_topology_token *tokens,
-				  int count,
-				  struct snd_soc_tplg_vendor_array *array)
+static int sof_parse_uuid_tokens(struct snd_soc_component *scomp,
+				 void *object,
+				 const struct sof_topology_token *tokens,
+				 int count,
+				 struct snd_soc_tplg_vendor_array *array,
+				 size_t offset)
 {
 	struct snd_soc_tplg_vendor_uuid_elem *elem;
+	int found = 0;
 	int i, j;
 
 	/* parse element by element */
@@ -776,19 +795,26 @@ static void sof_parse_uuid_tokens(struct snd_soc_component *scomp,
 				continue;
 
 			/* matched - now load token */
-			tokens[j].get_token(elem, object, tokens[j].offset,
+			tokens[j].get_token(elem, object,
+					    offset + tokens[j].offset,
 					    tokens[j].size);
+
+			found++;
 		}
 	}
+
+	return found;
 }
 
-static void sof_parse_string_tokens(struct snd_soc_component *scomp,
-				    void *object,
-				    const struct sof_topology_token *tokens,
-				    int count,
-				    struct snd_soc_tplg_vendor_array *array)
+static int sof_parse_string_tokens(struct snd_soc_component *scomp,
+				   void *object,
+				   const struct sof_topology_token *tokens,
+				   int count,
+				   struct snd_soc_tplg_vendor_array *array,
+				   size_t offset)
 {
 	struct snd_soc_tplg_vendor_string_elem *elem;
+	int found = 0;
 	int i, j;
 
 	/* parse element by element */
@@ -806,24 +832,27 @@ static void sof_parse_string_tokens(struct snd_soc_component *scomp,
 				continue;
 
 			/* matched - now load token */
-			tokens[j].get_token(elem, object, tokens[j].offset,
+			tokens[j].get_token(elem, object,
+					    offset + tokens[j].offset,
 					    tokens[j].size);
+
+			found++;
 		}
 	}
+
+	return found;
 }
 
-static void sof_parse_word_tokens(struct snd_soc_component *scomp,
-				  void *object,
-				  const struct sof_topology_token *tokens,
-				  int count,
-				  struct snd_soc_tplg_vendor_array *array)
+static int sof_parse_word_tokens(struct snd_soc_component *scomp,
+				 void *object,
+				 const struct sof_topology_token *tokens,
+				 int count,
+				 struct snd_soc_tplg_vendor_array *array,
+				 size_t offset)
 {
-	struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
 	struct snd_soc_tplg_vendor_value_elem *elem;
-	size_t size = sizeof(struct sof_ipc_dai_dmic_pdm_ctrl);
+	int found = 0;
 	int i, j;
-	u32 offset;
-	u32 *index = NULL;
 
 	/* parse element by element */
 	for (i = 0; i < le32_to_cpu(array->num_elems); i++) {
@@ -842,58 +871,45 @@ static void sof_parse_word_tokens(struct snd_soc_component *scomp,
 			if (tokens[j].token != le32_to_cpu(elem->token))
 				continue;
 
-			/* pdm config array index */
-			if (sdev->private)
-				index = sdev->private;
-
-			/* matched - determine offset */
-			switch (tokens[j].token) {
-			case SOF_TKN_INTEL_DMIC_PDM_CTRL_ID:
-
-				/* inc number of pdm array index */
-				if (index)
-					(*index)++;
-				/* fallthrough */
-			case SOF_TKN_INTEL_DMIC_PDM_MIC_A_Enable:
-			case SOF_TKN_INTEL_DMIC_PDM_MIC_B_Enable:
-			case SOF_TKN_INTEL_DMIC_PDM_POLARITY_A:
-			case SOF_TKN_INTEL_DMIC_PDM_POLARITY_B:
-			case SOF_TKN_INTEL_DMIC_PDM_CLK_EDGE:
-			case SOF_TKN_INTEL_DMIC_PDM_SKEW:
-
-				/* check if array index is valid */
-				if (!index || *index == 0) {
-					dev_err(scomp->dev,
-						"error: invalid array offset\n");
-					continue;
-				} else {
-					/* offset within the pdm config array */
-					offset = size * (*index - 1);
-				}
-				break;
-			default:
-				offset = 0;
-				break;
-			}
-
 			/* load token */
 			tokens[j].get_token(elem, object,
 					    offset + tokens[j].offset,
 					    tokens[j].size);
+
+			found++;
 		}
 	}
+
+	return found;
 }
 
-static int sof_parse_tokens(struct snd_soc_component *scomp,
-			    void *object,
-			    const struct sof_topology_token *tokens,
-			    int count,
-			    struct snd_soc_tplg_vendor_array *array,
-			    int priv_size)
-{
+/**
+ * sof_parse_token_sets - Parse multiple sets of tokens
+ * @scomp: pointer to soc component
+ * @object: target ipc struct for parsed values
+ * @tokens: token definition array describing what tokens to parse
+ * @count: number of tokens in definition array
+ * @array: source pointer to consecutive vendor arrays to be parsed
+ * @priv_size: total size of the consecutive source arrays
+ * @sets: number of similar token sets to be parsed, 1 set has count elements
+ * @object_size: offset to next target ipc struct with multiple sets
+ *
+ * This function parses multiple sets of tokens in vendor arrays into
+ * consecutive ipc structs.
+ */
+static int sof_parse_token_sets(struct snd_soc_component *scomp,
+				void *object,
+				const struct sof_topology_token *tokens,
+				int count,
+				struct snd_soc_tplg_vendor_array *array,
+				int priv_size, int sets, size_t object_size)
+{
+	size_t offset = 0;
+	int found = 0;
+	int total = 0;
 	int asize;
 
-	while (priv_size > 0) {
+	while (priv_size > 0 && total < count * sets) {
 		asize = le32_to_cpu(array->size);
 
 		/* validate asize */
@@ -914,19 +930,19 @@ static int sof_parse_tokens(struct snd_soc_component *scomp,
 		/* call correct parser depending on type */
 		switch (le32_to_cpu(array->type)) {
 		case SND_SOC_TPLG_TUPLE_TYPE_UUID:
-			sof_parse_uuid_tokens(scomp, object, tokens, count,
-					      array);
+			found += sof_parse_uuid_tokens(scomp, object, tokens,
+						       count, array, offset);
 			break;
 		case SND_SOC_TPLG_TUPLE_TYPE_STRING:
-			sof_parse_string_tokens(scomp, object, tokens, count,
-						array);
+			found += sof_parse_string_tokens(scomp, object, tokens,
+							 count, array, offset);
 			break;
 		case SND_SOC_TPLG_TUPLE_TYPE_BOOL:
 		case SND_SOC_TPLG_TUPLE_TYPE_BYTE:
 		case SND_SOC_TPLG_TUPLE_TYPE_WORD:
 		case SND_SOC_TPLG_TUPLE_TYPE_SHORT:
-			sof_parse_word_tokens(scomp, object, tokens, count,
-					      array);
+			found += sof_parse_word_tokens(scomp, object, tokens,
+						       count, array, offset);
 			break;
 		default:
 			dev_err(scomp->dev, "error: unknown token type %d\n",
@@ -937,10 +953,35 @@ static int sof_parse_tokens(struct snd_soc_component *scomp,
 		/* next array */
 		array = (struct snd_soc_tplg_vendor_array *)((u8 *)array
 			+ asize);
+
+		/* move to next target struct */
+		if (found >= count) {
+			offset += object_size;
+			total += found;
+			found = 0;
+		}
 	}
+
 	return 0;
 }
 
+static int sof_parse_tokens(struct snd_soc_component *scomp,
+			    void *object,
+			    const struct sof_topology_token *tokens,
+			    int count,
+			    struct snd_soc_tplg_vendor_array *array,
+			    int priv_size)
+{
+	/*
+	 * sof_parse_tokens is used when topology contains only a single set of
+	 * identical tuples arrays. So additional parameters to
+	 * sof_parse_token_sets are sets = 1 (only 1 set) and
+	 * object_size = 0 (irrelevant).
+	 */
+	return sof_parse_token_sets(scomp, object, tokens, count, array,
+				    priv_size, 1, 0);
+}
+
 static void sof_dbg_comp_config(struct snd_soc_component *scomp,
 				struct sof_ipc_comp_config *config)
 {
@@ -1257,15 +1298,45 @@ static int sof_connect_dai_widget(struct snd_soc_component *scomp,
 
 		switch (w->id) {
 		case snd_soc_dapm_dai_out:
-			for_each_rtd_cpu_dais(rtd, i, cpu_dai)
-				cpu_dai->capture_widget = w;
+			for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+				/*
+				 * Please create DAI widget in the right order
+				 * to ensure BE will connect to the right DAI
+				 * widget.
+				 */
+				if (!cpu_dai->capture_widget) {
+					cpu_dai->capture_widget = w;
+					break;
+				}
+			}
+			if (i == rtd->num_cpus) {
+				dev_err(scomp->dev, "error: can't find BE for DAI %s\n",
+					w->name);
+
+				return -EINVAL;
+			}
 			dai->name = rtd->dai_link->name;
 			dev_dbg(scomp->dev, "tplg: connected widget %s -> DAI link %s\n",
 				w->name, rtd->dai_link->name);
 			break;
 		case snd_soc_dapm_dai_in:
-			for_each_rtd_cpu_dais(rtd, i, cpu_dai)
-				cpu_dai->playback_widget = w;
+			for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
+				/*
+				 * Please create DAI widget in the right order
+				 * to ensure BE will connect to the right DAI
+				 * widget.
+				 */
+				if (!cpu_dai->playback_widget) {
+					cpu_dai->playback_widget = w;
+					break;
+				}
+			}
+			if (i == rtd->num_cpus) {
+				dev_err(scomp->dev, "error: can't find BE for DAI %s\n",
+					w->name);
+
+				return -EINVAL;
+			}
 			dai->name = rtd->dai_link->name;
 			dev_dbg(scomp->dev, "tplg: connected widget %s -> DAI link %s\n",
 				w->name, rtd->dai_link->name);
@@ -2860,18 +2931,13 @@ static int sof_link_dmic_load(struct snd_soc_component *scomp, int index,
 {
 	struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
 	struct snd_soc_tplg_private *private = &cfg->priv;
-	struct sof_ipc_dai_config *ipc_config;
 	struct sof_ipc_reply reply;
 	struct sof_ipc_fw_ready *ready = &sdev->fw_ready;
 	struct sof_ipc_fw_version *v = &ready->version;
-	u32 size;
+	size_t size = sizeof(*config);
 	int ret, j;
 
-	/*
-	 * config is only used for the common params in dmic_params structure
-	 * that does not include the PDM controller config array
-	 * Set the common params to 0.
-	 */
+	/* Ensure the entire DMIC config struct is zeros */
 	memset(&config->dmic, 0, sizeof(struct sof_ipc_dai_dmic_params));
 
 	/* get DMIC tokens */
@@ -2884,35 +2950,21 @@ static int sof_link_dmic_load(struct snd_soc_component *scomp, int index,
 		return ret;
 	}
 
-	/*
-	 * allocate memory for dmic dai config accounting for the
-	 * variable number of active pdm controllers
-	 * This will be the ipc payload for setting dai config
-	 */
-	size = sizeof(*config) + sizeof(struct sof_ipc_dai_dmic_pdm_ctrl) *
-					config->dmic.num_pdm_active;
-
-	ipc_config = kzalloc(size, GFP_KERNEL);
-	if (!ipc_config)
-		return -ENOMEM;
-
-	/* copy the common dai config and dmic params */
-	memcpy(ipc_config, config, sizeof(*config));
-
 	/*
 	 * alloc memory for private member
 	 * Used to track the pdm config array index currently being parsed
 	 */
 	sdev->private = kzalloc(sizeof(u32), GFP_KERNEL);
-	if (!sdev->private) {
-		kfree(ipc_config);
+	if (!sdev->private)
 		return -ENOMEM;
-	}
 
 	/* get DMIC PDM tokens */
-	ret = sof_parse_tokens(scomp, &ipc_config->dmic.pdm[0], dmic_pdm_tokens,
+	ret = sof_parse_token_sets(scomp, &config->dmic.pdm[0], dmic_pdm_tokens,
 			       ARRAY_SIZE(dmic_pdm_tokens), private->array,
-			       le32_to_cpu(private->size));
+			       le32_to_cpu(private->size),
+			       config->dmic.num_pdm_active,
+			       sizeof(struct sof_ipc_dai_dmic_pdm_ctrl));
+
 	if (ret != 0) {
 		dev_err(scomp->dev, "error: parse dmic pdm tokens failed %d\n",
 			le32_to_cpu(private->size));
@@ -2920,44 +2972,44 @@ static int sof_link_dmic_load(struct snd_soc_component *scomp, int index,
 	}
 
 	/* set IPC header size */
-	ipc_config->hdr.size = size;
+	config->hdr.size = size;
 
 	/* debug messages */
 	dev_dbg(scomp->dev, "tplg: config DMIC%d driver version %d\n",
-		ipc_config->dai_index, ipc_config->dmic.driver_ipc_version);
+		config->dai_index, config->dmic.driver_ipc_version);
 	dev_dbg(scomp->dev, "pdmclk_min %d pdm_clkmax %d duty_min %hd\n",
-		ipc_config->dmic.pdmclk_min, ipc_config->dmic.pdmclk_max,
-		ipc_config->dmic.duty_min);
+		config->dmic.pdmclk_min, config->dmic.pdmclk_max,
+		config->dmic.duty_min);
 	dev_dbg(scomp->dev, "duty_max %hd fifo_fs %d num_pdms active %d\n",
-		ipc_config->dmic.duty_max, ipc_config->dmic.fifo_fs,
-		ipc_config->dmic.num_pdm_active);
-	dev_dbg(scomp->dev, "fifo word length %hd\n",
-		ipc_config->dmic.fifo_bits);
+		config->dmic.duty_max, config->dmic.fifo_fs,
+		config->dmic.num_pdm_active);
+	dev_dbg(scomp->dev, "fifo word length %hd\n", config->dmic.fifo_bits);
 
-	for (j = 0; j < ipc_config->dmic.num_pdm_active; j++) {
+	for (j = 0; j < config->dmic.num_pdm_active; j++) {
 		dev_dbg(scomp->dev, "pdm %hd mic a %hd mic b %hd\n",
-			ipc_config->dmic.pdm[j].id,
-			ipc_config->dmic.pdm[j].enable_mic_a,
-			ipc_config->dmic.pdm[j].enable_mic_b);
+			config->dmic.pdm[j].id,
+			config->dmic.pdm[j].enable_mic_a,
+			config->dmic.pdm[j].enable_mic_b);
 		dev_dbg(scomp->dev, "pdm %hd polarity a %hd polarity b %hd\n",
-			ipc_config->dmic.pdm[j].id,
-			ipc_config->dmic.pdm[j].polarity_mic_a,
-			ipc_config->dmic.pdm[j].polarity_mic_b);
+			config->dmic.pdm[j].id,
+			config->dmic.pdm[j].polarity_mic_a,
+			config->dmic.pdm[j].polarity_mic_b);
 		dev_dbg(scomp->dev, "pdm %hd clk_edge %hd skew %hd\n",
-			ipc_config->dmic.pdm[j].id,
-			ipc_config->dmic.pdm[j].clk_edge,
-			ipc_config->dmic.pdm[j].skew);
+			config->dmic.pdm[j].id,
+			config->dmic.pdm[j].clk_edge,
+			config->dmic.pdm[j].skew);
 	}
 
-	if (SOF_ABI_VER(v->major, v->minor, v->micro) < SOF_ABI_VER(3, 0, 1)) {
-		/* this takes care of backwards compatible handling of fifo_bits_b */
-		ipc_config->dmic.reserved_2 = ipc_config->dmic.fifo_bits;
-	}
+	/*
+	 * this takes care of backwards compatible handling of fifo_bits_b.
+	 * It is deprecated since firmware ABI version 3.0.1.
+	 */
+	if (SOF_ABI_VER(v->major, v->minor, v->micro) < SOF_ABI_VER(3, 0, 1))
+		config->dmic.fifo_bits_b = config->dmic.fifo_bits;
 
 	/* send message to DSP */
-	ret = sof_ipc_tx_message(sdev->ipc,
-				 ipc_config->hdr.cmd, ipc_config, size, &reply,
-				 sizeof(reply));
+	ret = sof_ipc_tx_message(sdev->ipc, config->hdr.cmd, config, size,
+				 &reply, sizeof(reply));
 
 	if (ret < 0) {
 		dev_err(scomp->dev,
@@ -2967,14 +3019,13 @@ static int sof_link_dmic_load(struct snd_soc_component *scomp, int index,
 	}
 
 	/* set config for all DAI's with name matching the link name */
-	ret = sof_set_dai_config(sdev, size, link, ipc_config);
+	ret = sof_set_dai_config(sdev, size, link, config);
 	if (ret < 0)
 		dev_err(scomp->dev, "error: failed to save DAI config for DMIC%d\n",
 			config->dai_index);
 
 err:
 	kfree(sdev->private);
-	kfree(ipc_config);
 
 	return ret;
 }
@@ -3056,7 +3107,7 @@ static int sof_link_hda_load(struct snd_soc_component *scomp, int index,
 	config->hdr.size = size;
 
 	/* get any bespoke DAI tokens */
-	ret = sof_parse_tokens(scomp, config, hda_tokens,
+	ret = sof_parse_tokens(scomp, &config->hda, hda_tokens,
 			       ARRAY_SIZE(hda_tokens), private->array,
 			       le32_to_cpu(private->size));
 	if (ret != 0) {
@@ -3065,6 +3116,9 @@ static int sof_link_hda_load(struct snd_soc_component *scomp, int index,
 		return ret;
 	}
 
+	dev_dbg(scomp->dev, "HDA config rate %d channels %d\n",
+		config->hda.rate, config->hda.channels);
+
 	dai = snd_soc_find_dai(link->cpus);
 	if (!dai) {
 		dev_err(scomp->dev, "error: failed to find dai %s in %s",
@@ -3087,13 +3141,26 @@ static int sof_link_alh_load(struct snd_soc_component *scomp, int index,
 			     struct sof_ipc_dai_config *config)
 {
 	struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
+	struct snd_soc_tplg_private *private = &cfg->priv;
 	struct sof_ipc_reply reply;
 	u32 size = sizeof(*config);
 	int ret;
 
+	ret = sof_parse_tokens(scomp, &config->alh, alh_tokens,
+			       ARRAY_SIZE(alh_tokens), private->array,
+			       le32_to_cpu(private->size));
+	if (ret != 0) {
+		dev_err(scomp->dev, "error: parse alh tokens failed %d\n",
+			le32_to_cpu(private->size));
+		return ret;
+	}
+
 	/* init IPC */
 	config->hdr.size = size;
 
+	dev_dbg(scomp->dev, "ALH config rate %d channels %d\n",
+		config->alh.rate, config->alh.channels);
+
 	/* send message to DSP */
 	ret = sof_ipc_tx_message(sdev->ipc,
 				 config->hdr.cmd, config, size, &reply,
diff --git a/sound/soc/sprd/sprd-pcm-compress.c b/sound/soc/sprd/sprd-pcm-compress.c
index 74d48340cade..749dcb7b993b 100644
--- a/sound/soc/sprd/sprd-pcm-compress.c
+++ b/sound/soc/sprd/sprd-pcm-compress.c
@@ -96,7 +96,8 @@ struct sprd_compr_stream {
 	int stage1_pointer;
 };
 
-static int sprd_platform_compr_trigger(struct snd_compr_stream *cstream,
+static int sprd_platform_compr_trigger(struct snd_soc_component *component,
+				       struct snd_compr_stream *cstream,
 				       int cmd);
 
 static void sprd_platform_compr_drain_notify(void *arg)
@@ -125,15 +126,14 @@ static void sprd_platform_compr_dma_complete(void *data)
 	snd_compr_fragment_elapsed(cstream);
 }
 
-static int sprd_platform_compr_dma_config(struct snd_compr_stream *cstream,
+static int sprd_platform_compr_dma_config(struct snd_soc_component *component,
+					  struct snd_compr_stream *cstream,
 					  struct snd_compr_params *params,
 					  int channel)
 {
 	struct snd_compr_runtime *runtime = cstream->runtime;
 	struct sprd_compr_stream *stream = runtime->private_data;
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct device *dev = component->dev;
 	struct sprd_compr_data *data = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct sprd_pcm_dma_params *dma_params = data->dma_params;
@@ -261,14 +261,12 @@ static int sprd_platform_compr_dma_config(struct snd_compr_stream *cstream,
 	return ret;
 }
 
-static int sprd_platform_compr_set_params(struct snd_compr_stream *cstream,
+static int sprd_platform_compr_set_params(struct snd_soc_component *component,
+					  struct snd_compr_stream *cstream,
 					  struct snd_compr_params *params)
 {
 	struct snd_compr_runtime *runtime = cstream->runtime;
 	struct sprd_compr_stream *stream = runtime->private_data;
-	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct device *dev = component->dev;
 	struct sprd_compr_params compr_params = { };
 	int ret;
@@ -279,13 +277,13 @@ static int sprd_platform_compr_set_params(struct snd_compr_stream *cstream,
 	 * means once the source channel's transaction is done, it will trigger
 	 * the destination channel's transaction automatically.
 	 */
-	ret = sprd_platform_compr_dma_config(cstream, params, 1);
+	ret = sprd_platform_compr_dma_config(component, cstream, params, 1);
 	if (ret) {
 		dev_err(dev, "failed to config stage 1 DMA: %d\n", ret);
 		return ret;
 	}
 
-	ret = sprd_platform_compr_dma_config(cstream, params, 0);
+	ret = sprd_platform_compr_dma_config(component, cstream, params, 0);
 	if (ret) {
 		dev_err(dev, "failed to config stage 0 DMA: %d\n", ret);
 		goto config_err;
@@ -314,12 +312,11 @@ static int sprd_platform_compr_set_params(struct snd_compr_stream *cstream,
 	return ret;
 }
 
-static int sprd_platform_compr_open(struct snd_compr_stream *cstream)
+static int sprd_platform_compr_open(struct snd_soc_component *component,
+				    struct snd_compr_stream *cstream)
 {
 	struct snd_compr_runtime *runtime = cstream->runtime;
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct device *dev = component->dev;
 	struct sprd_compr_data *data = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
 	struct sprd_compr_stream *stream;
@@ -392,13 +389,11 @@ static int sprd_platform_compr_open(struct snd_compr_stream *cstream)
 	return ret;
 }
 
-static int sprd_platform_compr_free(struct snd_compr_stream *cstream)
+static int sprd_platform_compr_free(struct snd_soc_component *component,
+				    struct snd_compr_stream *cstream)
 {
 	struct snd_compr_runtime *runtime = cstream->runtime;
 	struct sprd_compr_stream *stream = runtime->private_data;
-	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct device *dev = component->dev;
 	int stream_id = cstream->direction, i;
 
@@ -420,14 +415,12 @@ static int sprd_platform_compr_free(struct snd_compr_stream *cstream)
 	return 0;
 }
 
-static int sprd_platform_compr_trigger(struct snd_compr_stream *cstream,
+static int sprd_platform_compr_trigger(struct snd_soc_component *component,
+				       struct snd_compr_stream *cstream,
 				       int cmd)
 {
 	struct snd_compr_runtime *runtime = cstream->runtime;
 	struct sprd_compr_stream *stream = runtime->private_data;
-	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
-	struct snd_soc_component *component =
-		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct device *dev = component->dev;
 	int channels = stream->num_channels, ret = 0, i;
 	int stream_id = cstream->direction;
@@ -518,7 +511,8 @@ static int sprd_platform_compr_trigger(struct snd_compr_stream *cstream,
 	return ret;
 }
 
-static int sprd_platform_compr_pointer(struct snd_compr_stream *cstream,
+static int sprd_platform_compr_pointer(struct snd_soc_component *component,
+				       struct snd_compr_stream *cstream,
 				       struct snd_compr_tstamp *tstamp)
 {
 	struct snd_compr_runtime *runtime = cstream->runtime;
@@ -532,7 +526,8 @@ static int sprd_platform_compr_pointer(struct snd_compr_stream *cstream,
 	return 0;
 }
 
-static int sprd_platform_compr_copy(struct snd_compr_stream *cstream,
+static int sprd_platform_compr_copy(struct snd_soc_component *component,
+				    struct snd_compr_stream *cstream,
 				    char __user *buf, size_t count)
 {
 	struct snd_compr_runtime *runtime = cstream->runtime;
@@ -609,7 +604,8 @@ static int sprd_platform_compr_copy(struct snd_compr_stream *cstream,
 	return count;
 }
 
-static int sprd_platform_compr_get_caps(struct snd_compr_stream *cstream,
+static int sprd_platform_compr_get_caps(struct snd_soc_component *component,
+					struct snd_compr_stream *cstream,
 					struct snd_compr_caps *caps)
 {
 	caps->direction = cstream->direction;
@@ -625,7 +621,8 @@ static int sprd_platform_compr_get_caps(struct snd_compr_stream *cstream,
 }
 
 static int
-sprd_platform_compr_get_codec_caps(struct snd_compr_stream *cstream,
+sprd_platform_compr_get_codec_caps(struct snd_soc_component *component,
+				   struct snd_compr_stream *cstream,
 				   struct snd_compr_codec_caps *codec)
 {
 	switch (codec->codec) {
@@ -658,7 +655,7 @@ sprd_platform_compr_get_codec_caps(struct snd_compr_stream *cstream,
 	return 0;
 }
 
-const struct snd_compr_ops sprd_platform_compr_ops = {
+const struct snd_compress_ops sprd_platform_compress_ops = {
 	.open = sprd_platform_compr_open,
 	.free = sprd_platform_compr_free,
 	.set_params = sprd_platform_compr_set_params,
diff --git a/sound/soc/sprd/sprd-pcm-dma.c b/sound/soc/sprd/sprd-pcm-dma.c
index d12d3cad8cbd..5074123f8855 100644
--- a/sound/soc/sprd/sprd-pcm-dma.c
+++ b/sound/soc/sprd/sprd-pcm-dma.c
@@ -515,7 +515,7 @@ static const struct snd_soc_component_driver sprd_soc_component = {
 	.mmap		= sprd_pcm_mmap,
 	.pcm_construct	= sprd_pcm_new,
 	.pcm_destruct	= sprd_pcm_free,
-	.compr_ops	= &sprd_platform_compr_ops,
+	.compress_ops	= &sprd_platform_compress_ops,
 };
 
 static int sprd_soc_platform_probe(struct platform_device *pdev)
diff --git a/sound/soc/sprd/sprd-pcm-dma.h b/sound/soc/sprd/sprd-pcm-dma.h
index 08e9fdba82f1..be5e385f5e42 100644
--- a/sound/soc/sprd/sprd-pcm-dma.h
+++ b/sound/soc/sprd/sprd-pcm-dma.h
@@ -6,7 +6,7 @@
 #define DRV_NAME		"sprd_pcm_dma"
 #define SPRD_PCM_CHANNEL_MAX	2
 
-extern const struct snd_compr_ops sprd_platform_compr_ops;
+extern const struct snd_compress_ops sprd_platform_compress_ops;
 
 struct sprd_pcm_dma_params {
 	dma_addr_t dev_phys[SPRD_PCM_CHANNEL_MAX];
diff --git a/sound/soc/tegra/tegra_alc5632.c b/sound/soc/tegra/tegra_alc5632.c
index ec39ecba1e8b..2839c6cb8c38 100644
--- a/sound/soc/tegra/tegra_alc5632.c
+++ b/sound/soc/tegra/tegra_alc5632.c
@@ -205,13 +205,11 @@ static int tegra_alc5632_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
 			ret);
-		goto err_fini_utils;
+		goto err_put_cpu_of_node;
 	}
 
 	return 0;
 
-err_fini_utils:
-	tegra_asoc_utils_fini(&alc5632->util_data);
 err_put_cpu_of_node:
 	of_node_put(tegra_alc5632_dai.cpus->of_node);
 	tegra_alc5632_dai.cpus->of_node = NULL;
@@ -226,12 +224,9 @@ static int tegra_alc5632_probe(struct platform_device *pdev)
 static int tegra_alc5632_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	struct tegra_alc5632 *machine = snd_soc_card_get_drvdata(card);
 
 	snd_soc_unregister_card(card);
 
-	tegra_asoc_utils_fini(&machine->util_data);
-
 	of_node_put(tegra_alc5632_dai.cpus->of_node);
 	tegra_alc5632_dai.cpus->of_node = NULL;
 	tegra_alc5632_dai.platforms->of_node = NULL;
diff --git a/sound/soc/tegra/tegra_asoc_utils.c b/sound/soc/tegra/tegra_asoc_utils.c
index 536a578e9512..587f62a288d1 100644
--- a/sound/soc/tegra/tegra_asoc_utils.c
+++ b/sound/soc/tegra/tegra_asoc_utils.c
@@ -60,8 +60,6 @@ int tegra_asoc_utils_set_rate(struct tegra_asoc_utils_data *data, int srate,
 	data->set_mclk = 0;
 
 	clk_disable_unprepare(data->clk_cdev1);
-	clk_disable_unprepare(data->clk_pll_a_out0);
-	clk_disable_unprepare(data->clk_pll_a);
 
 	err = clk_set_rate(data->clk_pll_a, new_baseclock);
 	if (err) {
@@ -77,18 +75,6 @@ int tegra_asoc_utils_set_rate(struct tegra_asoc_utils_data *data, int srate,
 
 	/* Don't set cdev1/extern1 rate; it's locked to pll_a_out0 */
 
-	err = clk_prepare_enable(data->clk_pll_a);
-	if (err) {
-		dev_err(data->dev, "Can't enable pll_a: %d\n", err);
-		return err;
-	}
-
-	err = clk_prepare_enable(data->clk_pll_a_out0);
-	if (err) {
-		dev_err(data->dev, "Can't enable pll_a_out0: %d\n", err);
-		return err;
-	}
-
 	err = clk_prepare_enable(data->clk_cdev1);
 	if (err) {
 		dev_err(data->dev, "Can't enable cdev1: %d\n", err);
@@ -109,8 +95,6 @@ int tegra_asoc_utils_set_ac97_rate(struct tegra_asoc_utils_data *data)
 	int err;
 
 	clk_disable_unprepare(data->clk_cdev1);
-	clk_disable_unprepare(data->clk_pll_a_out0);
-	clk_disable_unprepare(data->clk_pll_a);
 
 	/*
 	 * AC97 rate is fixed at 24.576MHz and is used for both the host
@@ -130,18 +114,6 @@ int tegra_asoc_utils_set_ac97_rate(struct tegra_asoc_utils_data *data)
 
 	/* Don't set cdev1/extern1 rate; it's locked to pll_a_out0 */
 
-	err = clk_prepare_enable(data->clk_pll_a);
-	if (err) {
-		dev_err(data->dev, "Can't enable pll_a: %d\n", err);
-		return err;
-	}
-
-	err = clk_prepare_enable(data->clk_pll_a_out0);
-	if (err) {
-		dev_err(data->dev, "Can't enable pll_a_out0: %d\n", err);
-		return err;
-	}
-
 	err = clk_prepare_enable(data->clk_cdev1);
 	if (err) {
 		dev_err(data->dev, "Can't enable cdev1: %d\n", err);
@@ -158,6 +130,7 @@ EXPORT_SYMBOL_GPL(tegra_asoc_utils_set_ac97_rate);
 int tegra_asoc_utils_init(struct tegra_asoc_utils_data *data,
 			  struct device *dev)
 {
+	struct clk *clk_out_1, *clk_extern1;
 	int ret;
 
 	data->dev = dev;
@@ -175,52 +148,78 @@ int tegra_asoc_utils_init(struct tegra_asoc_utils_data *data,
 		return -EINVAL;
 	}
 
-	data->clk_pll_a = clk_get(dev, "pll_a");
+	data->clk_pll_a = devm_clk_get(dev, "pll_a");
 	if (IS_ERR(data->clk_pll_a)) {
 		dev_err(data->dev, "Can't retrieve clk pll_a\n");
-		ret = PTR_ERR(data->clk_pll_a);
-		goto err;
+		return PTR_ERR(data->clk_pll_a);
 	}
 
-	data->clk_pll_a_out0 = clk_get(dev, "pll_a_out0");
+	data->clk_pll_a_out0 = devm_clk_get(dev, "pll_a_out0");
 	if (IS_ERR(data->clk_pll_a_out0)) {
 		dev_err(data->dev, "Can't retrieve clk pll_a_out0\n");
-		ret = PTR_ERR(data->clk_pll_a_out0);
-		goto err_put_pll_a;
+		return PTR_ERR(data->clk_pll_a_out0);
 	}
 
-	data->clk_cdev1 = clk_get(dev, "mclk");
+	data->clk_cdev1 = devm_clk_get(dev, "mclk");
 	if (IS_ERR(data->clk_cdev1)) {
 		dev_err(data->dev, "Can't retrieve clk cdev1\n");
-		ret = PTR_ERR(data->clk_cdev1);
-		goto err_put_pll_a_out0;
+		return PTR_ERR(data->clk_cdev1);
 	}
 
-	ret = tegra_asoc_utils_set_rate(data, 44100, 256 * 44100);
-	if (ret)
-		goto err_put_cdev1;
+	/*
+	 * If clock parents are not set in DT, configure here to use clk_out_1
+	 * as mclk and extern1 as parent for Tegra30 and higher.
+	 */
+	if (!of_find_property(dev->of_node, "assigned-clock-parents", NULL) &&
+	    data->soc > TEGRA_ASOC_UTILS_SOC_TEGRA20) {
+		dev_warn(data->dev,
+			 "Configuring clocks for a legacy device-tree\n");
+		dev_warn(data->dev,
+			 "Please update DT to use assigned-clock-parents\n");
+		clk_extern1 = devm_clk_get(dev, "extern1");
+		if (IS_ERR(clk_extern1)) {
+			dev_err(data->dev, "Can't retrieve clk extern1\n");
+			return PTR_ERR(clk_extern1);
+		}
+
+		ret = clk_set_parent(clk_extern1, data->clk_pll_a_out0);
+		if (ret < 0) {
+			dev_err(data->dev,
+				"Set parent failed for clk extern1\n");
+			return ret;
+		}
+
+		clk_out_1 = devm_clk_get(dev, "pmc_clk_out_1");
+		if (IS_ERR(clk_out_1)) {
+			dev_err(data->dev, "Can't retrieve pmc_clk_out_1\n");
+			return PTR_ERR(clk_out_1);
+		}
+
+		ret = clk_set_parent(clk_out_1, clk_extern1);
+		if (ret < 0) {
+			dev_err(data->dev,
+				"Set parent failed for pmc_clk_out_1\n");
+			return ret;
+		}
+
+		data->clk_cdev1 = clk_out_1;
+	}
 
-	return 0;
+	/*
+	 * FIXME: There is some unknown dependency between audio mclk disable
+	 * and suspend-resume functionality on Tegra30, although audio mclk is
+	 * only needed for audio.
+	 */
+	ret = clk_prepare_enable(data->clk_cdev1);
+	if (ret) {
+		dev_err(data->dev, "Can't enable cdev1: %d\n", ret);
+		return ret;
+	}
 
-err_put_cdev1:
-	clk_put(data->clk_cdev1);
-err_put_pll_a_out0:
-	clk_put(data->clk_pll_a_out0);
-err_put_pll_a:
-	clk_put(data->clk_pll_a);
-err:
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(tegra_asoc_utils_init);
 
-void tegra_asoc_utils_fini(struct tegra_asoc_utils_data *data)
-{
-	clk_put(data->clk_cdev1);
-	clk_put(data->clk_pll_a_out0);
-	clk_put(data->clk_pll_a);
-}
-EXPORT_SYMBOL_GPL(tegra_asoc_utils_fini);
-
 MODULE_AUTHOR("Stephen Warren <swarren@nvidia.com>");
 MODULE_DESCRIPTION("Tegra ASoC utility code");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/tegra/tegra_asoc_utils.h b/sound/soc/tegra/tegra_asoc_utils.h
index 0c13818dee75..a34439587d59 100644
--- a/sound/soc/tegra/tegra_asoc_utils.h
+++ b/sound/soc/tegra/tegra_asoc_utils.h
@@ -34,6 +34,5 @@ int tegra_asoc_utils_set_rate(struct tegra_asoc_utils_data *data, int srate,
 int tegra_asoc_utils_set_ac97_rate(struct tegra_asoc_utils_data *data);
 int tegra_asoc_utils_init(struct tegra_asoc_utils_data *data,
 			  struct device *dev);
-void tegra_asoc_utils_fini(struct tegra_asoc_utils_data *data);
 
 #endif
diff --git a/sound/soc/tegra/tegra_max98090.c b/sound/soc/tegra/tegra_max98090.c
index d800b62b36f8..ec9050516cd7 100644
--- a/sound/soc/tegra/tegra_max98090.c
+++ b/sound/soc/tegra/tegra_max98090.c
@@ -218,19 +218,18 @@ static int tegra_max98090_probe(struct platform_device *pdev)
 
 	ret = snd_soc_of_parse_card_name(card, "nvidia,model");
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = snd_soc_of_parse_audio_routing(card, "nvidia,audio-routing");
 	if (ret)
-		goto err;
+		return ret;
 
 	tegra_max98090_dai.codecs->of_node = of_parse_phandle(np,
 			"nvidia,audio-codec", 0);
 	if (!tegra_max98090_dai.codecs->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,audio-codec' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	tegra_max98090_dai.cpus->of_node = of_parse_phandle(np,
@@ -238,40 +237,31 @@ static int tegra_max98090_probe(struct platform_device *pdev)
 	if (!tegra_max98090_dai.cpus->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,i2s-controller' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	tegra_max98090_dai.platforms->of_node = tegra_max98090_dai.cpus->of_node;
 
 	ret = tegra_asoc_utils_init(&machine->util_data, &pdev->dev);
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = snd_soc_register_card(card);
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
 			ret);
-		goto err_fini_utils;
+		return ret;
 	}
 
 	return 0;
-
-err_fini_utils:
-	tegra_asoc_utils_fini(&machine->util_data);
-err:
-	return ret;
 }
 
 static int tegra_max98090_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	struct tegra_max98090 *machine = snd_soc_card_get_drvdata(card);
 
 	snd_soc_unregister_card(card);
 
-	tegra_asoc_utils_fini(&machine->util_data);
-
 	return 0;
 }
 
diff --git a/sound/soc/tegra/tegra_rt5640.c b/sound/soc/tegra/tegra_rt5640.c
index 9878bc3eb89e..201d132731f9 100644
--- a/sound/soc/tegra/tegra_rt5640.c
+++ b/sound/soc/tegra/tegra_rt5640.c
@@ -164,19 +164,18 @@ static int tegra_rt5640_probe(struct platform_device *pdev)
 
 	ret = snd_soc_of_parse_card_name(card, "nvidia,model");
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = snd_soc_of_parse_audio_routing(card, "nvidia,audio-routing");
 	if (ret)
-		goto err;
+		return ret;
 
 	tegra_rt5640_dai.codecs->of_node = of_parse_phandle(np,
 			"nvidia,audio-codec", 0);
 	if (!tegra_rt5640_dai.codecs->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,audio-codec' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	tegra_rt5640_dai.cpus->of_node = of_parse_phandle(np,
@@ -184,40 +183,31 @@ static int tegra_rt5640_probe(struct platform_device *pdev)
 	if (!tegra_rt5640_dai.cpus->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,i2s-controller' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	tegra_rt5640_dai.platforms->of_node = tegra_rt5640_dai.cpus->of_node;
 
 	ret = tegra_asoc_utils_init(&machine->util_data, &pdev->dev);
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = snd_soc_register_card(card);
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
 			ret);
-		goto err_fini_utils;
+		return ret;
 	}
 
 	return 0;
-
-err_fini_utils:
-	tegra_asoc_utils_fini(&machine->util_data);
-err:
-	return ret;
 }
 
 static int tegra_rt5640_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	struct tegra_rt5640 *machine = snd_soc_card_get_drvdata(card);
 
 	snd_soc_unregister_card(card);
 
-	tegra_asoc_utils_fini(&machine->util_data);
-
 	return 0;
 }
 
diff --git a/sound/soc/tegra/tegra_rt5677.c b/sound/soc/tegra/tegra_rt5677.c
index 5821313db977..8f71e21f6ee9 100644
--- a/sound/soc/tegra/tegra_rt5677.c
+++ b/sound/soc/tegra/tegra_rt5677.c
@@ -270,13 +270,11 @@ static int tegra_rt5677_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
 			ret);
-		goto err_fini_utils;
+		goto err_put_cpu_of_node;
 	}
 
 	return 0;
 
-err_fini_utils:
-	tegra_asoc_utils_fini(&machine->util_data);
 err_put_cpu_of_node:
 	of_node_put(tegra_rt5677_dai.cpus->of_node);
 	tegra_rt5677_dai.cpus->of_node = NULL;
@@ -291,12 +289,9 @@ static int tegra_rt5677_probe(struct platform_device *pdev)
 static int tegra_rt5677_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	struct tegra_rt5677 *machine = snd_soc_card_get_drvdata(card);
 
 	snd_soc_unregister_card(card);
 
-	tegra_asoc_utils_fini(&machine->util_data);
-
 	tegra_rt5677_dai.platforms->of_node = NULL;
 	of_node_put(tegra_rt5677_dai.codecs->of_node);
 	tegra_rt5677_dai.codecs->of_node = NULL;
diff --git a/sound/soc/tegra/tegra_sgtl5000.c b/sound/soc/tegra/tegra_sgtl5000.c
index dc411ba2e36d..692fcc3d7d6e 100644
--- a/sound/soc/tegra/tegra_sgtl5000.c
+++ b/sound/soc/tegra/tegra_sgtl5000.c
@@ -156,13 +156,11 @@ static int tegra_sgtl5000_driver_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
 			ret);
-		goto err_fini_utils;
+		goto err_put_cpu_of_node;
 	}
 
 	return 0;
 
-err_fini_utils:
-	tegra_asoc_utils_fini(&machine->util_data);
 err_put_cpu_of_node:
 	of_node_put(tegra_sgtl5000_dai.cpus->of_node);
 	tegra_sgtl5000_dai.cpus->of_node = NULL;
@@ -177,13 +175,10 @@ static int tegra_sgtl5000_driver_probe(struct platform_device *pdev)
 static int tegra_sgtl5000_driver_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	struct tegra_sgtl5000 *machine = snd_soc_card_get_drvdata(card);
 	int ret;
 
 	ret = snd_soc_unregister_card(card);
 
-	tegra_asoc_utils_fini(&machine->util_data);
-
 	of_node_put(tegra_sgtl5000_dai.cpus->of_node);
 	tegra_sgtl5000_dai.cpus->of_node = NULL;
 	tegra_sgtl5000_dai.platforms->of_node = NULL;
diff --git a/sound/soc/tegra/tegra_wm8753.c b/sound/soc/tegra/tegra_wm8753.c
index 0d653a605358..2ee2ed190872 100644
--- a/sound/soc/tegra/tegra_wm8753.c
+++ b/sound/soc/tegra/tegra_wm8753.c
@@ -127,19 +127,18 @@ static int tegra_wm8753_driver_probe(struct platform_device *pdev)
 
 	ret = snd_soc_of_parse_card_name(card, "nvidia,model");
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = snd_soc_of_parse_audio_routing(card, "nvidia,audio-routing");
 	if (ret)
-		goto err;
+		return ret;
 
 	tegra_wm8753_dai.codecs->of_node = of_parse_phandle(np,
 			"nvidia,audio-codec", 0);
 	if (!tegra_wm8753_dai.codecs->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,audio-codec' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	tegra_wm8753_dai.cpus->of_node = of_parse_phandle(np,
@@ -147,40 +146,31 @@ static int tegra_wm8753_driver_probe(struct platform_device *pdev)
 	if (!tegra_wm8753_dai.cpus->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,i2s-controller' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	tegra_wm8753_dai.platforms->of_node = tegra_wm8753_dai.cpus->of_node;
 
 	ret = tegra_asoc_utils_init(&machine->util_data, &pdev->dev);
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = snd_soc_register_card(card);
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
 			ret);
-		goto err_fini_utils;
+		return ret;
 	}
 
 	return 0;
-
-err_fini_utils:
-	tegra_asoc_utils_fini(&machine->util_data);
-err:
-	return ret;
 }
 
 static int tegra_wm8753_driver_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	struct tegra_wm8753 *machine = snd_soc_card_get_drvdata(card);
 
 	snd_soc_unregister_card(card);
 
-	tegra_asoc_utils_fini(&machine->util_data);
-
 	return 0;
 }
 
diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c
index 9b5651502f12..d3ead0213cef 100644
--- a/sound/soc/tegra/tegra_wm8903.c
+++ b/sound/soc/tegra/tegra_wm8903.c
@@ -177,6 +177,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
 	struct snd_soc_component *component = codec_dai->component;
 	struct snd_soc_card *card = rtd->card;
 	struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
+	int shrt = 0;
 
 	if (gpio_is_valid(machine->gpio_hp_det)) {
 		tegra_wm8903_hp_jack_gpio.gpio = machine->gpio_hp_det;
@@ -189,12 +190,15 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
 					&tegra_wm8903_hp_jack_gpio);
 	}
 
+	if (of_property_read_bool(card->dev->of_node, "nvidia,headset"))
+		shrt = SND_JACK_MICROPHONE;
+
 	snd_soc_card_jack_new(rtd->card, "Mic Jack", SND_JACK_MICROPHONE,
 			      &tegra_wm8903_mic_jack,
 			      tegra_wm8903_mic_jack_pins,
 			      ARRAY_SIZE(tegra_wm8903_mic_jack_pins));
 	wm8903_mic_detect(component, &tegra_wm8903_mic_jack, SND_JACK_MICROPHONE,
-				0);
+				shrt);
 
 	snd_soc_dapm_force_enable_pin(&card->dapm, "MICBIAS");
 
@@ -319,19 +323,18 @@ static int tegra_wm8903_driver_probe(struct platform_device *pdev)
 
 	ret = snd_soc_of_parse_card_name(card, "nvidia,model");
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = snd_soc_of_parse_audio_routing(card, "nvidia,audio-routing");
 	if (ret)
-		goto err;
+		return ret;
 
 	tegra_wm8903_dai.codecs->of_node = of_parse_phandle(np,
 						"nvidia,audio-codec", 0);
 	if (!tegra_wm8903_dai.codecs->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,audio-codec' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	tegra_wm8903_dai.cpus->of_node = of_parse_phandle(np,
@@ -339,40 +342,22 @@ static int tegra_wm8903_driver_probe(struct platform_device *pdev)
 	if (!tegra_wm8903_dai.cpus->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,i2s-controller' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	tegra_wm8903_dai.platforms->of_node = tegra_wm8903_dai.cpus->of_node;
 
 	ret = tegra_asoc_utils_init(&machine->util_data, &pdev->dev);
 	if (ret)
-		goto err;
+		return ret;
 
-	ret = snd_soc_register_card(card);
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
 	if (ret) {
-		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
+		dev_err(&pdev->dev, "devm_snd_soc_register_card failed (%d)\n",
 			ret);
-		goto err_fini_utils;
+		return ret;
 	}
 
-	return 0;
-
-err_fini_utils:
-	tegra_asoc_utils_fini(&machine->util_data);
-err:
-	return ret;
-}
-
-static int tegra_wm8903_driver_remove(struct platform_device *pdev)
-{
-	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
-
-	snd_soc_unregister_card(card);
-
-	tegra_asoc_utils_fini(&machine->util_data);
-
 	return 0;
 }
 
@@ -388,7 +373,6 @@ static struct platform_driver tegra_wm8903_driver = {
 		.of_match_table = tegra_wm8903_of_match,
 	},
 	.probe = tegra_wm8903_driver_probe,
-	.remove = tegra_wm8903_driver_remove,
 };
 module_platform_driver(tegra_wm8903_driver);
 
diff --git a/sound/soc/tegra/tegra_wm9712.c b/sound/soc/tegra/tegra_wm9712.c
index b85bd9f89073..726edfa21a29 100644
--- a/sound/soc/tegra/tegra_wm9712.c
+++ b/sound/soc/tegra/tegra_wm9712.c
@@ -113,19 +113,17 @@ static int tegra_wm9712_driver_probe(struct platform_device *pdev)
 
 	ret = tegra_asoc_utils_set_ac97_rate(&machine->util_data);
 	if (ret)
-		goto asoc_utils_fini;
+		goto codec_unregister;
 
 	ret = snd_soc_register_card(card);
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
 			ret);
-		goto asoc_utils_fini;
+		goto codec_unregister;
 	}
 
 	return 0;
 
-asoc_utils_fini:
-	tegra_asoc_utils_fini(&machine->util_data);
 codec_unregister:
 	platform_device_del(machine->codec);
 codec_put:
@@ -140,8 +138,6 @@ static int tegra_wm9712_driver_remove(struct platform_device *pdev)
 
 	snd_soc_unregister_card(card);
 
-	tegra_asoc_utils_fini(&machine->util_data);
-
 	platform_device_unregister(machine->codec);
 
 	return 0;
diff --git a/sound/soc/tegra/trimslice.c b/sound/soc/tegra/trimslice.c
index f9834afaa2e8..6dca6836aa04 100644
--- a/sound/soc/tegra/trimslice.c
+++ b/sound/soc/tegra/trimslice.c
@@ -125,8 +125,7 @@ static int tegra_snd_trimslice_probe(struct platform_device *pdev)
 	if (!trimslice_tlv320aic23_dai.codecs->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,audio-codec' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	trimslice_tlv320aic23_dai.cpus->of_node = of_parse_phandle(np,
@@ -134,8 +133,7 @@ static int tegra_snd_trimslice_probe(struct platform_device *pdev)
 	if (!trimslice_tlv320aic23_dai.cpus->of_node) {
 		dev_err(&pdev->dev,
 			"Property 'nvidia,i2s-controller' missing or invalid\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	trimslice_tlv320aic23_dai.platforms->of_node =
@@ -143,32 +141,24 @@ static int tegra_snd_trimslice_probe(struct platform_device *pdev)
 
 	ret = tegra_asoc_utils_init(&trimslice->util_data, &pdev->dev);
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = snd_soc_register_card(card);
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
 			ret);
-		goto err_fini_utils;
+		return ret;
 	}
 
 	return 0;
-
-err_fini_utils:
-	tegra_asoc_utils_fini(&trimslice->util_data);
-err:
-	return ret;
 }
 
 static int tegra_snd_trimslice_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	struct tegra_trimslice *trimslice = snd_soc_card_get_drvdata(card);
 
 	snd_soc_unregister_card(card);
 
-	tegra_asoc_utils_fini(&trimslice->util_data);
-
 	return 0;
 }
 
diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c
index 734ffe925c4d..7a7db743dc5b 100644
--- a/sound/soc/ti/davinci-mcasp.c
+++ b/sound/soc/ti/davinci-mcasp.c
@@ -1896,8 +1896,10 @@ static int davinci_mcasp_get_dma_type(struct davinci_mcasp *mcasp)
 				PTR_ERR(chan));
 		return PTR_ERR(chan);
 	}
-	if (WARN_ON(!chan->device || !chan->device->dev))
+	if (WARN_ON(!chan->device || !chan->device->dev)) {
+		dma_release_channel(chan);
 		return -EINVAL;
+	}
 
 	if (chan->device->dev->of_node)
 		ret = of_property_read_string(chan->device->dev->of_node,
diff --git a/sound/soc/ti/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c
index 3d41ca2238d4..0348963f4df7 100644
--- a/sound/soc/ti/omap-mcbsp.c
+++ b/sound/soc/ti/omap-mcbsp.c
@@ -1185,7 +1185,7 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 	default:
 		return -EINVAL;
 	}
-	if (inv_fs == true)
+	if (inv_fs)
 		regs->pcr0 ^= FSXP | FSRP;
 
 	return 0;
diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c
index b1d9615f2375..d9e348444bd0 100644
--- a/sound/soc/txx9/txx9aclc-ac97.c
+++ b/sound/soc/txx9/txx9aclc-ac97.c
@@ -14,6 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
+#include <asm/mach-tx39xx/ioremap.h> /* for TXX9_DIRECTMAP_BASE */
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/uniphier/aio-compress.c b/sound/soc/uniphier/aio-compress.c
index 232d3cc5bce0..0f76bc601ca9 100644
--- a/sound/soc/uniphier/aio-compress.c
+++ b/sound/soc/uniphier/aio-compress.c
@@ -16,8 +16,10 @@
 
 #include "aio.h"
 
-static int uniphier_aio_compr_prepare(struct snd_compr_stream *cstream);
-static int uniphier_aio_compr_hw_free(struct snd_compr_stream *cstream);
+static int uniphier_aio_compr_prepare(struct snd_soc_component *component,
+				      struct snd_compr_stream *cstream);
+static int uniphier_aio_compr_hw_free(struct snd_soc_component *component,
+				      struct snd_compr_stream *cstream);
 
 static int uniphier_aio_comprdma_new(struct snd_soc_pcm_runtime *rtd)
 {
@@ -70,7 +72,8 @@ static int uniphier_aio_comprdma_free(struct snd_soc_pcm_runtime *rtd)
 	return 0;
 }
 
-static int uniphier_aio_compr_open(struct snd_compr_stream *cstream)
+static int uniphier_aio_compr_open(struct snd_soc_component *component,
+				   struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
@@ -95,14 +98,15 @@ static int uniphier_aio_compr_open(struct snd_compr_stream *cstream)
 	return 0;
 }
 
-static int uniphier_aio_compr_free(struct snd_compr_stream *cstream)
+static int uniphier_aio_compr_free(struct snd_soc_component *component,
+				   struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
 	struct uniphier_aio_sub *sub = &aio->sub[cstream->direction];
 	int ret;
 
-	ret = uniphier_aio_compr_hw_free(cstream);
+	ret = uniphier_aio_compr_hw_free(component, cstream);
 	if (ret)
 		return ret;
 	ret = uniphier_aio_comprdma_free(rtd);
@@ -114,7 +118,8 @@ static int uniphier_aio_compr_free(struct snd_compr_stream *cstream)
 	return 0;
 }
 
-static int uniphier_aio_compr_get_params(struct snd_compr_stream *cstream,
+static int uniphier_aio_compr_get_params(struct snd_soc_component *component,
+					 struct snd_compr_stream *cstream,
 					 struct snd_codec *params)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
@@ -126,7 +131,8 @@ static int uniphier_aio_compr_get_params(struct snd_compr_stream *cstream,
 	return 0;
 }
 
-static int uniphier_aio_compr_set_params(struct snd_compr_stream *cstream,
+static int uniphier_aio_compr_set_params(struct snd_soc_component *component,
+					 struct snd_compr_stream *cstream,
 					 struct snd_compr_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
@@ -155,14 +161,15 @@ static int uniphier_aio_compr_set_params(struct snd_compr_stream *cstream,
 	aio_port_reset(sub);
 	aio_src_reset(sub);
 
-	ret = uniphier_aio_compr_prepare(cstream);
+	ret = uniphier_aio_compr_prepare(component, cstream);
 	if (ret)
 		return ret;
 
 	return 0;
 }
 
-static int uniphier_aio_compr_hw_free(struct snd_compr_stream *cstream)
+static int uniphier_aio_compr_hw_free(struct snd_soc_component *component,
+				      struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct uniphier_aio *aio = uniphier_priv(asoc_rtd_to_cpu(rtd, 0));
@@ -173,7 +180,8 @@ static int uniphier_aio_compr_hw_free(struct snd_compr_stream *cstream)
 	return 0;
 }
 
-static int uniphier_aio_compr_prepare(struct snd_compr_stream *cstream)
+static int uniphier_aio_compr_prepare(struct snd_soc_component *component,
+				      struct snd_compr_stream *cstream)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
 	struct snd_compr_runtime *runtime = cstream->runtime;
@@ -210,7 +218,8 @@ static int uniphier_aio_compr_prepare(struct snd_compr_stream *cstream)
 	return 0;
 }
 
-static int uniphier_aio_compr_trigger(struct snd_compr_stream *cstream,
+static int uniphier_aio_compr_trigger(struct snd_soc_component *component,
+				      struct snd_compr_stream *cstream,
 				      int cmd)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
@@ -243,7 +252,8 @@ static int uniphier_aio_compr_trigger(struct snd_compr_stream *cstream,
 	return ret;
 }
 
-static int uniphier_aio_compr_pointer(struct snd_compr_stream *cstream,
+static int uniphier_aio_compr_pointer(struct snd_soc_component *component,
+				      struct snd_compr_stream *cstream,
 				      struct snd_compr_tstamp *tstamp)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
@@ -316,7 +326,8 @@ static int aio_compr_send_to_hw(struct uniphier_aio_sub *sub,
 	return 0;
 }
 
-static int uniphier_aio_compr_copy(struct snd_compr_stream *cstream,
+static int uniphier_aio_compr_copy(struct snd_soc_component *component,
+				   struct snd_compr_stream *cstream,
 				   char __user *buf, size_t count)
 {
 	struct snd_soc_pcm_runtime *rtd = cstream->private_data;
@@ -375,7 +386,8 @@ static int uniphier_aio_compr_copy(struct snd_compr_stream *cstream,
 	return cnt;
 }
 
-static int uniphier_aio_compr_get_caps(struct snd_compr_stream *cstream,
+static int uniphier_aio_compr_get_caps(struct snd_soc_component *component,
+				       struct snd_compr_stream *cstream,
 				       struct snd_compr_caps *caps)
 {
 	caps->num_codecs = 1;
@@ -401,7 +413,8 @@ static const struct snd_compr_codec_caps caps_iec = {
 	.descriptor[0].formats = 0,
 };
 
-static int uniphier_aio_compr_get_codec_caps(struct snd_compr_stream *stream,
+static int uniphier_aio_compr_get_codec_caps(struct snd_soc_component *component,
+					     struct snd_compr_stream *stream,
 					     struct snd_compr_codec_caps *codec)
 {
 	if (codec->codec == SND_AUDIOCODEC_IEC61937)
@@ -412,7 +425,7 @@ static int uniphier_aio_compr_get_codec_caps(struct snd_compr_stream *stream,
 	return 0;
 }
 
-const struct snd_compr_ops uniphier_aio_compr_ops = {
+const struct snd_compress_ops uniphier_aio_compress_ops = {
 	.open           = uniphier_aio_compr_open,
 	.free           = uniphier_aio_compr_free,
 	.get_params     = uniphier_aio_compr_get_params,
diff --git a/sound/soc/uniphier/aio-dma.c b/sound/soc/uniphier/aio-dma.c
index 4bbcb007df41..d6bcd476df12 100644
--- a/sound/soc/uniphier/aio-dma.c
+++ b/sound/soc/uniphier/aio-dma.c
@@ -227,7 +227,7 @@ static const struct snd_soc_component_driver uniphier_soc_platform = {
 	.pointer	= uniphier_aiodma_pointer,
 	.mmap		= uniphier_aiodma_mmap,
 	.pcm_construct	= uniphier_aiodma_new,
-	.compr_ops	= &uniphier_aio_compr_ops,
+	.compress_ops	= &uniphier_aio_compress_ops,
 };
 
 static const struct regmap_config aiodma_regmap_config = {
diff --git a/sound/soc/uniphier/aio.h b/sound/soc/uniphier/aio.h
index 694ac030950e..0b03571aa9f0 100644
--- a/sound/soc/uniphier/aio.h
+++ b/sound/soc/uniphier/aio.h
@@ -304,7 +304,7 @@ static inline struct uniphier_aio *uniphier_priv(struct snd_soc_dai *dai)
 }
 
 int uniphier_aiodma_soc_register_platform(struct platform_device *pdev);
-extern const struct snd_compr_ops uniphier_aio_compr_ops;
+extern const struct snd_compress_ops uniphier_aio_compress_ops;
 
 int uniphier_aio_dai_probe(struct snd_soc_dai *dai);
 int uniphier_aio_dai_remove(struct snd_soc_dai *dai);
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 395403a2d33f..820e564656ed 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -84,6 +84,10 @@ struct snd_usb_endpoint {
 	dma_addr_t sync_dma;		/* DMA address of syncbuf */
 
 	unsigned int pipe;		/* the data i/o pipe */
+	unsigned int framesize[2];	/* small/large frame sizes in samples */
+	unsigned int sample_rem;	/* remainder from division fs/fps */
+	unsigned int sample_accum;	/* sample accumulator */
+	unsigned int fps;		/* frames per second */
 	unsigned int freqn;		/* nominal sampling rate in fs/fps in Q16.16 format */
 	unsigned int freqm;		/* momentary sampling rate in fs/fps in Q16.16 format */
 	int	   freqshift;		/* how much to shift the feedback value to get Q16.16 */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 4a9a2f6ef5a4..50104f658ed4 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -124,12 +124,12 @@ int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep)
 
 /*
  * For streaming based on information derived from sync endpoints,
- * prepare_outbound_urb_sizes() will call next_packet_size() to
+ * prepare_outbound_urb_sizes() will call slave_next_packet_size() to
  * determine the number of samples to be sent in the next packet.
  *
- * For implicit feedback, next_packet_size() is unused.
+ * For implicit feedback, slave_next_packet_size() is unused.
  */
-int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep)
 {
 	unsigned long flags;
 	int ret;
@@ -146,6 +146,29 @@ int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
 	return ret;
 }
 
+/*
+ * For adaptive and synchronous endpoints, prepare_outbound_urb_sizes()
+ * will call next_packet_size() to determine the number of samples to be
+ * sent in the next packet.
+ */
+int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
+{
+	int ret;
+
+	if (ep->fill_max)
+		return ep->maxframesize;
+
+	ep->sample_accum += ep->sample_rem;
+	if (ep->sample_accum >= ep->fps) {
+		ep->sample_accum -= ep->fps;
+		ret = ep->framesize[1];
+	} else {
+		ret = ep->framesize[0];
+	}
+
+	return ret;
+}
+
 static void retire_outbound_urb(struct snd_usb_endpoint *ep,
 				struct snd_urb_ctx *urb_ctx)
 {
@@ -190,6 +213,8 @@ static void prepare_silent_urb(struct snd_usb_endpoint *ep,
 
 		if (ctx->packet_size[i])
 			counts = ctx->packet_size[i];
+		else if (ep->sync_master)
+			counts = snd_usb_endpoint_slave_next_packet_size(ep);
 		else
 			counts = snd_usb_endpoint_next_packet_size(ep);
 
@@ -321,17 +346,17 @@ static void queue_pending_output_urbs(struct snd_usb_endpoint *ep)
 			ep->next_packet_read_pos %= MAX_URBS;
 
 			/* take URB out of FIFO */
-			if (!list_empty(&ep->ready_playback_urbs))
+			if (!list_empty(&ep->ready_playback_urbs)) {
 				ctx = list_first_entry(&ep->ready_playback_urbs,
 					       struct snd_urb_ctx, ready_list);
+				list_del_init(&ctx->ready_list);
+			}
 		}
 		spin_unlock_irqrestore(&ep->lock, flags);
 
 		if (ctx == NULL)
 			return;
 
-		list_del_init(&ctx->ready_list);
-
 		/* copy over the length information */
 		for (i = 0; i < packet->packets; i++)
 			ctx->packet_size[i] = packet->packet_size[i];
@@ -874,10 +899,17 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
 	ep->maxpacksize = fmt->maxpacksize;
 	ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
 
-	if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL)
+	if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) {
 		ep->freqn = get_usb_full_speed_rate(rate);
-	else
+		ep->fps = 1000;
+	} else {
 		ep->freqn = get_usb_high_speed_rate(rate);
+		ep->fps = 8000;
+	}
+
+	ep->sample_rem = rate % ep->fps;
+	ep->framesize[0] = rate / ep->fps;
+	ep->framesize[1] = (rate + (ep->fps - 1)) / ep->fps;
 
 	/* calculate the frequency in 16.16 format */
 	ep->freqm = ep->freqn;
@@ -936,6 +968,7 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 	ep->active_mask = 0;
 	ep->unlink_mask = 0;
 	ep->phase = 0;
+	ep->sample_accum = 0;
 
 	snd_usb_endpoint_start_quirk(ep);
 
diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h
index 63a39d4fa8d8..d23fa0a8c11b 100644
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -28,6 +28,7 @@ void snd_usb_endpoint_release(struct snd_usb_endpoint *ep);
 void snd_usb_endpoint_free(struct snd_usb_endpoint *ep);
 
 int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep);
+int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep);
 int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep);
 
 void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c
index d37db32ecd3b..e39dc85c355a 100644
--- a/sound/usb/line6/podhd.c
+++ b/sound/usb/line6/podhd.c
@@ -21,8 +21,7 @@
 enum {
 	LINE6_PODHD300,
 	LINE6_PODHD400,
-	LINE6_PODHD500_0,
-	LINE6_PODHD500_1,
+	LINE6_PODHD500,
 	LINE6_PODX3,
 	LINE6_PODX3LIVE,
 	LINE6_PODHD500X,
@@ -318,8 +317,7 @@ static const struct usb_device_id podhd_id_table[] = {
 	/* TODO: no need to alloc data interfaces when only audio is used */
 	{ LINE6_DEVICE(0x5057),    .driver_info = LINE6_PODHD300 },
 	{ LINE6_DEVICE(0x5058),    .driver_info = LINE6_PODHD400 },
-	{ LINE6_IF_NUM(0x414D, 0), .driver_info = LINE6_PODHD500_0 },
-	{ LINE6_IF_NUM(0x414D, 1), .driver_info = LINE6_PODHD500_1 },
+	{ LINE6_IF_NUM(0x414D, 0), .driver_info = LINE6_PODHD500 },
 	{ LINE6_IF_NUM(0x414A, 0), .driver_info = LINE6_PODX3 },
 	{ LINE6_IF_NUM(0x414B, 0), .driver_info = LINE6_PODX3LIVE },
 	{ LINE6_IF_NUM(0x4159, 0), .driver_info = LINE6_PODHD500X },
@@ -352,23 +350,13 @@ static const struct line6_properties podhd_properties_table[] = {
 		.ep_audio_r = 0x82,
 		.ep_audio_w = 0x01,
 	},
-	[LINE6_PODHD500_0] = {
+	[LINE6_PODHD500] = {
 		.id = "PODHD500",
 		.name = "POD HD500",
-		.capabilities	= LINE6_CAP_PCM
+		.capabilities	= LINE6_CAP_PCM | LINE6_CAP_CONTROL
 				| LINE6_CAP_HWMON,
 		.altsetting = 1,
-		.ep_ctrl_r = 0x81,
-		.ep_ctrl_w = 0x01,
-		.ep_audio_r = 0x86,
-		.ep_audio_w = 0x02,
-	},
-	[LINE6_PODHD500_1] = {
-		.id = "PODHD500",
-		.name = "POD HD500",
-		.capabilities	= LINE6_CAP_PCM
-				| LINE6_CAP_HWMON,
-		.altsetting = 0,
+		.ctrl_if = 1,
 		.ep_ctrl_r = 0x81,
 		.ep_ctrl_w = 0x01,
 		.ep_audio_r = 0x86,
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index a5f65a9a0254..bdff8674942e 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -2185,6 +2185,421 @@ static int snd_rme_controls_create(struct usb_mixer_interface *mixer)
 	return 0;
 }
 
+/*
+ * RME Babyface Pro (FS)
+ *
+ * These devices exposes a couple of DSP functions via request to EP0.
+ * Switches are available via control registers, while routing is controlled
+ * by controlling the volume on each possible crossing point.
+ * Volume control is linear, from -inf (dec. 0) to +6dB (dec. 46341) with
+ * 0dB being at dec. 32768.
+ */
+enum {
+	SND_BBFPRO_CTL_REG1 = 0,
+	SND_BBFPRO_CTL_REG2
+};
+
+#define SND_BBFPRO_CTL_REG_MASK 1
+#define SND_BBFPRO_CTL_IDX_MASK 0xff
+#define SND_BBFPRO_CTL_IDX_SHIFT 1
+#define SND_BBFPRO_CTL_VAL_MASK 1
+#define SND_BBFPRO_CTL_VAL_SHIFT 9
+#define SND_BBFPRO_CTL_REG1_CLK_MASTER 0
+#define SND_BBFPRO_CTL_REG1_CLK_OPTICAL 1
+#define SND_BBFPRO_CTL_REG1_SPDIF_PRO 7
+#define SND_BBFPRO_CTL_REG1_SPDIF_EMPH 8
+#define SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL 10
+#define SND_BBFPRO_CTL_REG2_48V_AN1 0
+#define SND_BBFPRO_CTL_REG2_48V_AN2 1
+#define SND_BBFPRO_CTL_REG2_SENS_IN3 2
+#define SND_BBFPRO_CTL_REG2_SENS_IN4 3
+#define SND_BBFPRO_CTL_REG2_PAD_AN1 4
+#define SND_BBFPRO_CTL_REG2_PAD_AN2 5
+
+#define SND_BBFPRO_MIXER_IDX_MASK 0x1ff
+#define SND_BBFPRO_MIXER_VAL_MASK 0x3ffff
+#define SND_BBFPRO_MIXER_VAL_SHIFT 9
+#define SND_BBFPRO_MIXER_VAL_MIN 0 // -inf
+#define SND_BBFPRO_MIXER_VAL_MAX 46341 // +6dB
+
+#define SND_BBFPRO_USBREQ_CTL_REG1 0x10
+#define SND_BBFPRO_USBREQ_CTL_REG2 0x17
+#define SND_BBFPRO_USBREQ_MIXER 0x12
+
+static int snd_bbfpro_ctl_update(struct usb_mixer_interface *mixer, u8 reg,
+				 u8 index, u8 value)
+{
+	int err;
+	u16 usb_req, usb_idx, usb_val;
+	struct snd_usb_audio *chip = mixer->chip;
+
+	err = snd_usb_lock_shutdown(chip);
+	if (err < 0)
+		return err;
+
+	if (reg == SND_BBFPRO_CTL_REG1) {
+		usb_req = SND_BBFPRO_USBREQ_CTL_REG1;
+		if (index == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) {
+			usb_idx = 3;
+			usb_val = value ? 3 : 0;
+		} else {
+			usb_idx = 1 << index;
+			usb_val = value ? usb_idx : 0;
+		}
+	} else {
+		usb_req = SND_BBFPRO_USBREQ_CTL_REG2;
+		usb_idx = 1 << index;
+		usb_val = value ? usb_idx : 0;
+	}
+
+	err = snd_usb_ctl_msg(chip->dev,
+			      usb_sndctrlpipe(chip->dev, 0), usb_req,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      usb_val, usb_idx, 0, 0);
+
+	snd_usb_unlock_shutdown(chip);
+	return err;
+}
+
+static int snd_bbfpro_ctl_get(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	u8 reg, idx, val;
+	int pv;
+
+	pv = kcontrol->private_value;
+	reg = pv & SND_BBFPRO_CTL_REG_MASK;
+	idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+	val = kcontrol->private_value >> SND_BBFPRO_CTL_VAL_SHIFT;
+
+	if ((reg == SND_BBFPRO_CTL_REG1 &&
+	     idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) ||
+	    (reg == SND_BBFPRO_CTL_REG2 &&
+	    (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
+	     idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) {
+		ucontrol->value.enumerated.item[0] = val;
+	} else {
+		ucontrol->value.integer.value[0] = val;
+	}
+	return 0;
+}
+
+static int snd_bbfpro_ctl_info(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_info *uinfo)
+{
+	u8 reg, idx;
+	int pv;
+
+	pv = kcontrol->private_value;
+	reg = pv & SND_BBFPRO_CTL_REG_MASK;
+	idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+
+	if (reg == SND_BBFPRO_CTL_REG1 &&
+	    idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) {
+		static const char * const texts[2] = {
+			"AutoSync",
+			"Internal"
+		};
+		return snd_ctl_enum_info(uinfo, 1, 2, texts);
+	} else if (reg == SND_BBFPRO_CTL_REG2 &&
+		   (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
+		    idx == SND_BBFPRO_CTL_REG2_SENS_IN4)) {
+		static const char * const texts[2] = {
+			"-10dBV",
+			"+4dBu"
+		};
+		return snd_ctl_enum_info(uinfo, 1, 2, texts);
+	}
+
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	return 0;
+}
+
+static int snd_bbfpro_ctl_put(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	int err;
+	u8 reg, idx;
+	int old_value, pv, val;
+
+	struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+	struct usb_mixer_interface *mixer = list->mixer;
+
+	pv = kcontrol->private_value;
+	reg = pv & SND_BBFPRO_CTL_REG_MASK;
+	idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+	old_value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK;
+
+	if ((reg == SND_BBFPRO_CTL_REG1 &&
+	     idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) ||
+	    (reg == SND_BBFPRO_CTL_REG2 &&
+	    (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
+	     idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) {
+		val = ucontrol->value.enumerated.item[0];
+	} else {
+		val = ucontrol->value.integer.value[0];
+	}
+
+	if (val > 1)
+		return -EINVAL;
+
+	if (val == old_value)
+		return 0;
+
+	kcontrol->private_value = reg
+		| ((idx & SND_BBFPRO_CTL_IDX_MASK) << SND_BBFPRO_CTL_IDX_SHIFT)
+		| ((val & SND_BBFPRO_CTL_VAL_MASK) << SND_BBFPRO_CTL_VAL_SHIFT);
+
+	err = snd_bbfpro_ctl_update(mixer, reg, idx, val);
+	return err < 0 ? err : 1;
+}
+
+static int snd_bbfpro_ctl_resume(struct usb_mixer_elem_list *list)
+{
+	u8 reg, idx;
+	int value, pv;
+
+	pv = list->kctl->private_value;
+	reg = pv & SND_BBFPRO_CTL_REG_MASK;
+	idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+	value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK;
+
+	return snd_bbfpro_ctl_update(list->mixer, reg, idx, value);
+}
+
+static int snd_bbfpro_vol_update(struct usb_mixer_interface *mixer, u16 index,
+				 u32 value)
+{
+	struct snd_usb_audio *chip = mixer->chip;
+	int err;
+	u16 idx;
+	u16 usb_idx, usb_val;
+	u32 v;
+
+	err = snd_usb_lock_shutdown(chip);
+	if (err < 0)
+		return err;
+
+	idx = index & SND_BBFPRO_MIXER_IDX_MASK;
+	// 18 bit linear volume, split so 2 bits end up in index.
+	v = value & SND_BBFPRO_MIXER_VAL_MASK;
+	usb_idx = idx | (v & 0x3) << 14;
+	usb_val = (v >> 2) & 0xffff;
+
+	err = snd_usb_ctl_msg(chip->dev,
+			      usb_sndctrlpipe(chip->dev, 0),
+			      SND_BBFPRO_USBREQ_MIXER,
+			      USB_DIR_OUT | USB_TYPE_VENDOR |
+			      USB_RECIP_DEVICE,
+			      usb_val, usb_idx, 0, 0);
+
+	snd_usb_unlock_shutdown(chip);
+	return err;
+}
+
+static int snd_bbfpro_vol_get(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] =
+		kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT;
+	return 0;
+}
+
+static int snd_bbfpro_vol_info(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = SND_BBFPRO_MIXER_VAL_MIN;
+	uinfo->value.integer.max = SND_BBFPRO_MIXER_VAL_MAX;
+	return 0;
+}
+
+static int snd_bbfpro_vol_put(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	int err;
+	u16 idx;
+	u32 new_val, old_value, uvalue;
+	struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+	struct usb_mixer_interface *mixer = list->mixer;
+
+	uvalue = ucontrol->value.integer.value[0];
+	idx = kcontrol->private_value & SND_BBFPRO_MIXER_IDX_MASK;
+	old_value = kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT;
+
+	if (uvalue > SND_BBFPRO_MIXER_VAL_MAX)
+		return -EINVAL;
+
+	if (uvalue == old_value)
+		return 0;
+
+	new_val = uvalue & SND_BBFPRO_MIXER_VAL_MASK;
+
+	kcontrol->private_value = idx
+		| (new_val << SND_BBFPRO_MIXER_VAL_SHIFT);
+
+	err = snd_bbfpro_vol_update(mixer, idx, new_val);
+	return err < 0 ? err : 1;
+}
+
+static int snd_bbfpro_vol_resume(struct usb_mixer_elem_list *list)
+{
+	int pv = list->kctl->private_value;
+	u16 idx = pv & SND_BBFPRO_MIXER_IDX_MASK;
+	u32 val = (pv >> SND_BBFPRO_MIXER_VAL_SHIFT)
+		& SND_BBFPRO_MIXER_VAL_MASK;
+	return snd_bbfpro_vol_update(list->mixer, idx, val);
+}
+
+// Predfine elements
+static const struct snd_kcontrol_new snd_bbfpro_ctl_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.index = 0,
+	.info = snd_bbfpro_ctl_info,
+	.get = snd_bbfpro_ctl_get,
+	.put = snd_bbfpro_ctl_put
+};
+
+static const struct snd_kcontrol_new snd_bbfpro_vol_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.index = 0,
+	.info = snd_bbfpro_vol_info,
+	.get = snd_bbfpro_vol_get,
+	.put = snd_bbfpro_vol_put
+};
+
+static int snd_bbfpro_ctl_add(struct usb_mixer_interface *mixer, u8 reg,
+			      u8 index, char *name)
+{
+	struct snd_kcontrol_new knew = snd_bbfpro_ctl_control;
+
+	knew.name = name;
+	knew.private_value = (reg & SND_BBFPRO_CTL_REG_MASK)
+		| ((index & SND_BBFPRO_CTL_IDX_MASK)
+			<< SND_BBFPRO_CTL_IDX_SHIFT);
+
+	return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_ctl_resume,
+		&knew, NULL);
+}
+
+static int snd_bbfpro_vol_add(struct usb_mixer_interface *mixer, u16 index,
+			      char *name)
+{
+	struct snd_kcontrol_new knew = snd_bbfpro_vol_control;
+
+	knew.name = name;
+	knew.private_value = index & SND_BBFPRO_MIXER_IDX_MASK;
+
+	return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_vol_resume,
+		&knew, NULL);
+}
+
+static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer)
+{
+	int err, i, o;
+	char name[48];
+
+	static const char * const input[] = {
+		"AN1", "AN2", "IN3", "IN4", "AS1", "AS2", "ADAT3",
+		"ADAT4", "ADAT5", "ADAT6", "ADAT7", "ADAT8"};
+
+	static const char * const output[] = {
+		"AN1", "AN2", "PH3", "PH4", "AS1", "AS2", "ADAT3", "ADAT4",
+		"ADAT5", "ADAT6", "ADAT7", "ADAT8"};
+
+	for (o = 0 ; o < 12 ; ++o) {
+		for (i = 0 ; i < 12 ; ++i) {
+			// Line routing
+			snprintf(name, sizeof(name),
+				 "%s-%s-%s Playback Volume",
+				 (i < 2 ? "Mic" : "Line"),
+				 input[i], output[o]);
+			err = snd_bbfpro_vol_add(mixer, (26 * o + i), name);
+			if (err < 0)
+				return err;
+
+			// PCM routing... yes, it is output remapping
+			snprintf(name, sizeof(name),
+				 "PCM-%s-%s Playback Volume",
+				 output[i], output[o]);
+			err = snd_bbfpro_vol_add(mixer, (26 * o + 12 + i),
+						 name);
+			if (err < 0)
+				return err;
+		}
+	}
+
+	// Control Reg 1
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+				 SND_BBFPRO_CTL_REG1_CLK_OPTICAL,
+				 "Sample Clock Source");
+	if (err < 0)
+		return err;
+
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+				 SND_BBFPRO_CTL_REG1_SPDIF_PRO,
+				 "IEC958 Pro Mask");
+	if (err < 0)
+		return err;
+
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+				 SND_BBFPRO_CTL_REG1_SPDIF_EMPH,
+				 "IEC958 Emphasis");
+	if (err < 0)
+		return err;
+
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+				 SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL,
+				 "IEC958 Switch");
+	if (err < 0)
+		return err;
+
+	// Control Reg 2
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+				 SND_BBFPRO_CTL_REG2_48V_AN1,
+				 "Mic-AN1 48V");
+	if (err < 0)
+		return err;
+
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+				 SND_BBFPRO_CTL_REG2_48V_AN2,
+				 "Mic-AN2 48V");
+	if (err < 0)
+		return err;
+
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+				 SND_BBFPRO_CTL_REG2_SENS_IN3,
+				 "Line-IN3 Sens.");
+	if (err < 0)
+		return err;
+
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+				 SND_BBFPRO_CTL_REG2_SENS_IN4,
+				 "Line-IN4 Sens.");
+	if (err < 0)
+		return err;
+
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+				 SND_BBFPRO_CTL_REG2_PAD_AN1,
+				 "Mic-AN1 PAD");
+	if (err < 0)
+		return err;
+
+	err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+				 SND_BBFPRO_CTL_REG2_PAD_AN2,
+				 "Mic-AN2 PAD");
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
 int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 {
 	int err = 0;
@@ -2286,6 +2701,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 	case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */
 		err = snd_sc1810_init_mixer(mixer);
 		break;
+	case USB_ID(0x2a39, 0x3fb0): /* RME Babyface Pro FS */
+		err = snd_bbfpro_controls_create(mixer);
+		break;
 	}
 
 	return err;
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index a4e4064f9aee..b50965ab3b3a 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1579,6 +1579,8 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,
 	for (i = 0; i < ctx->packets; i++) {
 		if (ctx->packet_size[i])
 			counts = ctx->packet_size[i];
+		else if (ep->sync_master)
+			counts = snd_usb_endpoint_slave_next_packet_size(ep);
 		else
 			counts = snd_usb_endpoint_next_packet_size(ep);
 
diff --git a/sound/usb/proc.c b/sound/usb/proc.c
index 4174ad11fca6..889c550c9f29 100644
--- a/sound/usb/proc.c
+++ b/sound/usb/proc.c
@@ -54,6 +54,38 @@ void snd_usb_audio_create_proc(struct snd_usb_audio *chip)
 			     proc_audio_usbid_read);
 }
 
+static const char * const channel_labels[] = {
+	[SNDRV_CHMAP_NA]	= "N/A",
+	[SNDRV_CHMAP_MONO]	= "MONO",
+	[SNDRV_CHMAP_FL]	= "FL",
+	[SNDRV_CHMAP_FR]	= "FR",
+	[SNDRV_CHMAP_FC]	= "FC",
+	[SNDRV_CHMAP_LFE]	= "LFE",
+	[SNDRV_CHMAP_RL]	= "RL",
+	[SNDRV_CHMAP_RR]	= "RR",
+	[SNDRV_CHMAP_FLC]	= "FLC",
+	[SNDRV_CHMAP_FRC]	= "FRC",
+	[SNDRV_CHMAP_RC]	= "RC",
+	[SNDRV_CHMAP_SL]	= "SL",
+	[SNDRV_CHMAP_SR]	= "SR",
+	[SNDRV_CHMAP_TC]	= "TC",
+	[SNDRV_CHMAP_TFL]	= "TFL",
+	[SNDRV_CHMAP_TFC]	= "TFC",
+	[SNDRV_CHMAP_TFR]	= "TFR",
+	[SNDRV_CHMAP_TRL]	= "TRL",
+	[SNDRV_CHMAP_TRC]	= "TRC",
+	[SNDRV_CHMAP_TRR]	= "TRR",
+	[SNDRV_CHMAP_TFLC]	= "TFLC",
+	[SNDRV_CHMAP_TFRC]	= "TFRC",
+	[SNDRV_CHMAP_LLFE]	= "LLFE",
+	[SNDRV_CHMAP_RLFE]	= "RLFE",
+	[SNDRV_CHMAP_TSL]	= "TSL",
+	[SNDRV_CHMAP_TSR]	= "TSR",
+	[SNDRV_CHMAP_BC]	= "BC",
+	[SNDRV_CHMAP_RLC]	= "RLC",
+	[SNDRV_CHMAP_RRC]	= "RRC",
+};
+
 /*
  * proc interface for list the supported pcm formats
  */
@@ -97,6 +129,27 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s
 			snd_iprintf(buffer, "    Data packet interval: %d us\n",
 				    125 * (1 << fp->datainterval));
 		snd_iprintf(buffer, "    Bits: %d\n", fp->fmt_bits);
+
+		if (fp->dsd_raw)
+			snd_iprintf(buffer, "    DSD raw: DOP=%d, bitrev=%d\n",
+				    fp->dsd_dop, fp->dsd_bitrev);
+
+		if (fp->chmap) {
+			const struct snd_pcm_chmap_elem *map = fp->chmap;
+			int c;
+
+			snd_iprintf(buffer, "    Channel map:");
+			for (c = 0; c < map->channels; c++) {
+				if (map->map[c] >= ARRAY_SIZE(channel_labels) ||
+				    !channel_labels[map->map[c]])
+					snd_iprintf(buffer, " --");
+				else
+					snd_iprintf(buffer, " %s",
+						    channel_labels[map->map[c]]);
+			}
+			snd_iprintf(buffer, "\n");
+		}
+
 		// snd_iprintf(buffer, "    Max Packet Size = %d\n", fp->maxpacksize);
 		// snd_iprintf(buffer, "    EP Attribute = %#x\n", fp->attributes);
 	}
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 351ba214a9d3..a8ece1701068 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1806,20 +1806,6 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
 		 */
 		fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
 		break;
-	case USB_ID(0x1235, 0x8200):  /* Focusrite Scarlett 2i4 2nd gen */
-	case USB_ID(0x1235, 0x8202):  /* Focusrite Scarlett 2i2 2nd gen */
-	case USB_ID(0x1235, 0x8205):  /* Focusrite Scarlett Solo 2nd gen */
-		/*
-		 * Reports that playback should use Synch: Synchronous
-		 * while still providing a feedback endpoint.
-		 * Synchronous causes snapping on some sample rates.
-		 * Force it to use Synch: Asynchronous.
-		 */
-		if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
-			fp->ep_attr |= USB_ENDPOINT_SYNC_ASYNC;
-		}
-		break;
 	}
 }
 
diff --git a/sound/usb/usx2y/usbusx2y.h b/sound/usb/usx2y/usbusx2y.h
index e0f77172ce8f..144b85f57bd2 100644
--- a/sound/usb/usx2y/usbusx2y.h
+++ b/sound/usb/usx2y/usbusx2y.h
@@ -18,7 +18,7 @@ struct snd_usX2Y_AsyncSeq {
 struct snd_usX2Y_urbSeq {
 	int	submitted;
 	int	len;
-	struct urb	*urb[0];
+	struct urb	*urb[];
 };
 
 #include "usx2yhwdeppcm.h"
diff --git a/tools/arch/x86/include/asm/orc_types.h b/tools/arch/x86/include/asm/orc_types.h
index 6e060907c163..d25534940bde 100644
--- a/tools/arch/x86/include/asm/orc_types.h
+++ b/tools/arch/x86/include/asm/orc_types.h
@@ -58,8 +58,7 @@
 #define ORC_TYPE_CALL			0
 #define ORC_TYPE_REGS			1
 #define ORC_TYPE_REGS_IRET		2
-#define UNWIND_HINT_TYPE_SAVE		3
-#define UNWIND_HINT_TYPE_RESTORE	4
+#define UNWIND_HINT_TYPE_RET_OFFSET	3
 
 #ifndef __ASSEMBLY__
 /*
diff --git a/tools/bpf/bpf_asm.c b/tools/bpf/bpf_asm.c
index e5f95e3eede3..0063c3c029e7 100644
--- a/tools/bpf/bpf_asm.c
+++ b/tools/bpf/bpf_asm.c
@@ -11,7 +11,7 @@
  *
  * How to get into it:
  *
- * 1) read Documentation/networking/filter.txt
+ * 1) read Documentation/networking/filter.rst
  * 2) Run `bpf_asm [-c] <filter-prog file>` to translate into binary
  *    blob that is loadable with xt_bpf, cls_bpf et al. Note: -c will
  *    pretty print a C-like construct.
diff --git a/tools/bpf/bpf_dbg.c b/tools/bpf/bpf_dbg.c
index 9d3766e653a9..a0ebcdf59c31 100644
--- a/tools/bpf/bpf_dbg.c
+++ b/tools/bpf/bpf_dbg.c
@@ -13,7 +13,7 @@
  * for making a verdict when multiple simple BPF programs are combined
  * into one in order to prevent parsing same headers multiple times.
  *
- * More on how to debug BPF opcodes see Documentation/networking/filter.txt
+ * More on how to debug BPF opcodes see Documentation/networking/filter.rst
  * which is the main document on BPF. Mini howto for getting started:
  *
  *  1) `./bpf_dbg` to enter the shell (shell cmds denoted with '>'):
diff --git a/tools/bpf/bpftool/Documentation/bpftool-feature.rst b/tools/bpf/bpftool/Documentation/bpftool-feature.rst
index b04156cfd7a3..1fa755f55e0c 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-feature.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-feature.rst
@@ -19,7 +19,7 @@ SYNOPSIS
 FEATURE COMMANDS
 ================
 
-|	**bpftool** **feature probe** [*COMPONENT*] [**full**] [**macros** [**prefix** *PREFIX*]]
+|	**bpftool** **feature probe** [*COMPONENT*] [**full**] [**unprivileged**] [**macros** [**prefix** *PREFIX*]]
 |	**bpftool** **feature help**
 |
 |	*COMPONENT* := { **kernel** | **dev** *NAME* }
@@ -49,6 +49,16 @@ DESCRIPTION
 		  Keyword **kernel** can be omitted. If no probe target is
 		  specified, probing the kernel is the default behaviour.
 
+		  When the **unprivileged** keyword is used, bpftool will dump
+		  only the features available to a user who does not have the
+		  **CAP_SYS_ADMIN** capability set. The features available in
+		  that case usually represent a small subset of the parameters
+		  supported by the system. Unprivileged users MUST use the
+		  **unprivileged** keyword: This is to avoid misdetection if
+		  bpftool is inadvertently run as non-root, for example. This
+		  keyword is unavailable if bpftool was compiled without
+		  libcap.
+
 	**bpftool feature probe dev** *NAME* [**full**] [**macros** [**prefix** *PREFIX*]]
 		  Probe network device for supported eBPF features and dump
 		  results to the console.
diff --git a/tools/bpf/bpftool/Documentation/bpftool-link.rst b/tools/bpf/bpftool/Documentation/bpftool-link.rst
new file mode 100644
index 000000000000..ee6500d6e6e4
--- /dev/null
+++ b/tools/bpf/bpftool/Documentation/bpftool-link.rst
@@ -0,0 +1,118 @@
+================
+bpftool-link
+================
+-------------------------------------------------------------------------------
+tool for inspection and simple manipulation of eBPF links
+-------------------------------------------------------------------------------
+
+:Manual section: 8
+
+SYNOPSIS
+========
+
+	**bpftool** [*OPTIONS*] **link** *COMMAND*
+
+	*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-f** | **--bpffs** } }
+
+	*COMMANDS* := { **show** | **list** | **pin** | **help** }
+
+LINK COMMANDS
+=============
+
+|	**bpftool** **link { show | list }** [*LINK*]
+|	**bpftool** **link pin** *LINK* *FILE*
+|	**bpftool** **link help**
+|
+|	*LINK* := { **id** *LINK_ID* | **pinned** *FILE* }
+
+
+DESCRIPTION
+===========
+	**bpftool link { show | list }** [*LINK*]
+		  Show information about active links. If *LINK* is
+		  specified show information only about given link,
+		  otherwise list all links currently active on the system.
+
+		  Output will start with link ID followed by link type and
+		  zero or more named attributes, some of which depend on type
+		  of link.
+
+	**bpftool link pin** *LINK* *FILE*
+		  Pin link *LINK* as *FILE*.
+
+		  Note: *FILE* must be located in *bpffs* mount. It must not
+		  contain a dot character ('.'), which is reserved for future
+		  extensions of *bpffs*.
+
+	**bpftool link help**
+		  Print short help message.
+
+OPTIONS
+=======
+	-h, --help
+		  Print short generic help message (similar to **bpftool help**).
+
+	-V, --version
+		  Print version number (similar to **bpftool version**).
+
+	-j, --json
+		  Generate JSON output. For commands that cannot produce JSON, this
+		  option has no effect.
+
+	-p, --pretty
+		  Generate human-readable JSON output. Implies **-j**.
+
+	-f, --bpffs
+		  When showing BPF links, show file names of pinned
+		  links.
+
+	-n, --nomount
+		  Do not automatically attempt to mount any virtual file system
+		  (such as tracefs or BPF virtual file system) when necessary.
+
+	-d, --debug
+		  Print all logs available, even debug-level information. This
+		  includes logs from libbpf.
+
+EXAMPLES
+========
+**# bpftool link show**
+
+::
+
+    10: cgroup  prog 25
+            cgroup_id 614  attach_type egress
+
+**# bpftool --json --pretty link show**
+
+::
+
+    [{
+            "type": "cgroup",
+            "prog_id": 25,
+            "cgroup_id": 614,
+            "attach_type": "egress"
+        }
+    ]
+
+|
+| **# bpftool link pin id 10 /sys/fs/bpf/link**
+| **# ls -l /sys/fs/bpf/**
+
+::
+
+    -rw------- 1 root root 0 Apr 23 21:39 link
+
+
+SEE ALSO
+========
+	**bpf**\ (2),
+	**bpf-helpers**\ (7),
+	**bpftool**\ (8),
+	**bpftool-prog\ (8),
+	**bpftool-map**\ (8),
+	**bpftool-cgroup**\ (8),
+	**bpftool-feature**\ (8),
+	**bpftool-net**\ (8),
+	**bpftool-perf**\ (8),
+	**bpftool-btf**\ (8)
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index f584d1fdfc64..2759f9cc3289 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -55,16 +55,15 @@ ifneq ($(EXTRA_LDFLAGS),)
 LDFLAGS += $(EXTRA_LDFLAGS)
 endif
 
-LIBS = $(LIBBPF) -lelf -lz
-
 INSTALL ?= install
 RM ?= rm -f
 CLANG ?= clang
 
 FEATURE_USER = .bpftool
-FEATURE_TESTS = libbfd disassembler-four-args reallocarray zlib \
+FEATURE_TESTS = libbfd disassembler-four-args reallocarray zlib libcap \
+	clang-bpf-global-var
+FEATURE_DISPLAY = libbfd disassembler-four-args zlib libcap \
 	clang-bpf-global-var
-FEATURE_DISPLAY = libbfd disassembler-four-args zlib clang-bpf-global-var
 
 check_feat := 1
 NON_CHECK_FEAT_TARGETS := clean uninstall doc doc-clean doc-install doc-uninstall
@@ -90,6 +89,12 @@ ifeq ($(feature-reallocarray), 0)
 CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
 endif
 
+LIBS = $(LIBBPF) -lelf -lz
+ifeq ($(feature-libcap), 1)
+CFLAGS += -DUSE_LIBCAP
+LIBS += -lcap
+endif
+
 include $(wildcard $(OUTPUT)*.d)
 
 all: $(OUTPUT)bpftool
diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool
index 45ee99b159e2..fc989ead7313 100644
--- a/tools/bpf/bpftool/bash-completion/bpftool
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -98,6 +98,12 @@ _bpftool_get_btf_ids()
         command sed -n 's/.*"id": \(.*\),$/\1/p' )" -- "$cur" ) )
 }
 
+_bpftool_get_link_ids()
+{
+    COMPREPLY+=( $( compgen -W "$( bpftool -jp link 2>&1 | \
+        command sed -n 's/.*"id": \(.*\),$/\1/p' )" -- "$cur" ) )
+}
+
 _bpftool_get_obj_map_names()
 {
     local obj
@@ -1073,7 +1079,7 @@ _bpftool()
                         COMPREPLY+=( $( compgen -W 'macros' -- "$cur" ) )
                     fi
                     _bpftool_one_of_list 'kernel dev'
-                    _bpftool_once_attr 'full'
+                    _bpftool_once_attr 'full unprivileged'
                     return 0
                     ;;
                 *)
@@ -1082,6 +1088,39 @@ _bpftool()
                     ;;
             esac
             ;;
+        link)
+            case $command in
+                show|list|pin)
+                    case $prev in
+                        id)
+                            _bpftool_get_link_ids
+                            return 0
+                            ;;
+                    esac
+                    ;;
+            esac
+
+            local LINK_TYPE='id pinned'
+            case $command in
+                show|list)
+                    [[ $prev != "$command" ]] && return 0
+                    COMPREPLY=( $( compgen -W "$LINK_TYPE" -- "$cur" ) )
+                    return 0
+                    ;;
+                pin)
+                    if [[ $prev == "$command" ]]; then
+                        COMPREPLY=( $( compgen -W "$LINK_TYPE" -- "$cur" ) )
+                    else
+                        _filedir
+                    fi
+                    return 0
+                    ;;
+                *)
+                    [[ $prev == $object ]] && \
+                        COMPREPLY=( $( compgen -W 'help pin show list' -- "$cur" ) )
+                    ;;
+            esac
+            ;;
     esac
 } &&
 complete -F _bpftool bpftool
diff --git a/tools/bpf/bpftool/btf.c b/tools/bpf/bpftool/btf.c
index bcaf55b59498..41a1346934a1 100644
--- a/tools/bpf/bpftool/btf.c
+++ b/tools/bpf/bpftool/btf.c
@@ -15,7 +15,6 @@
 #include <linux/hashtable.h>
 #include <sys/types.h>
 #include <sys/stat.h>
-#include <unistd.h>
 
 #include "json_writer.h"
 #include "main.h"
diff --git a/tools/bpf/bpftool/cgroup.c b/tools/bpf/bpftool/cgroup.c
index 62c6a1d7cd18..1693c802bb20 100644
--- a/tools/bpf/bpftool/cgroup.c
+++ b/tools/bpf/bpftool/cgroup.c
@@ -31,42 +31,20 @@
 
 static unsigned int query_flags;
 
-static const char * const attach_type_strings[] = {
-	[BPF_CGROUP_INET_INGRESS] = "ingress",
-	[BPF_CGROUP_INET_EGRESS] = "egress",
-	[BPF_CGROUP_INET_SOCK_CREATE] = "sock_create",
-	[BPF_CGROUP_SOCK_OPS] = "sock_ops",
-	[BPF_CGROUP_DEVICE] = "device",
-	[BPF_CGROUP_INET4_BIND] = "bind4",
-	[BPF_CGROUP_INET6_BIND] = "bind6",
-	[BPF_CGROUP_INET4_CONNECT] = "connect4",
-	[BPF_CGROUP_INET6_CONNECT] = "connect6",
-	[BPF_CGROUP_INET4_POST_BIND] = "post_bind4",
-	[BPF_CGROUP_INET6_POST_BIND] = "post_bind6",
-	[BPF_CGROUP_UDP4_SENDMSG] = "sendmsg4",
-	[BPF_CGROUP_UDP6_SENDMSG] = "sendmsg6",
-	[BPF_CGROUP_SYSCTL] = "sysctl",
-	[BPF_CGROUP_UDP4_RECVMSG] = "recvmsg4",
-	[BPF_CGROUP_UDP6_RECVMSG] = "recvmsg6",
-	[BPF_CGROUP_GETSOCKOPT] = "getsockopt",
-	[BPF_CGROUP_SETSOCKOPT] = "setsockopt",
-	[__MAX_BPF_ATTACH_TYPE] = NULL,
-};
-
 static enum bpf_attach_type parse_attach_type(const char *str)
 {
 	enum bpf_attach_type type;
 
 	for (type = 0; type < __MAX_BPF_ATTACH_TYPE; type++) {
-		if (attach_type_strings[type] &&
-		    is_prefix(str, attach_type_strings[type]))
+		if (attach_type_name[type] &&
+		    is_prefix(str, attach_type_name[type]))
 			return type;
 	}
 
 	return __MAX_BPF_ATTACH_TYPE;
 }
 
-static int show_bpf_prog(int id, const char *attach_type_str,
+static int show_bpf_prog(int id, enum bpf_attach_type attach_type,
 			 const char *attach_flags_str,
 			 int level)
 {
@@ -86,18 +64,22 @@ static int show_bpf_prog(int id, const char *attach_type_str,
 	if (json_output) {
 		jsonw_start_object(json_wtr);
 		jsonw_uint_field(json_wtr, "id", info.id);
-		jsonw_string_field(json_wtr, "attach_type",
-				   attach_type_str);
+		if (attach_type < ARRAY_SIZE(attach_type_name))
+			jsonw_string_field(json_wtr, "attach_type",
+					   attach_type_name[attach_type]);
+		else
+			jsonw_uint_field(json_wtr, "attach_type", attach_type);
 		jsonw_string_field(json_wtr, "attach_flags",
 				   attach_flags_str);
 		jsonw_string_field(json_wtr, "name", info.name);
 		jsonw_end_object(json_wtr);
 	} else {
-		printf("%s%-8u %-15s %-15s %-15s\n", level ? "    " : "",
-		       info.id,
-		       attach_type_str,
-		       attach_flags_str,
-		       info.name);
+		printf("%s%-8u ", level ? "    " : "", info.id);
+		if (attach_type < ARRAY_SIZE(attach_type_name))
+			printf("%-15s", attach_type_name[attach_type]);
+		else
+			printf("type %-10u", attach_type);
+		printf(" %-15s %-15s\n", attach_flags_str, info.name);
 	}
 
 	close(prog_fd);
@@ -171,7 +153,7 @@ static int show_attached_bpf_progs(int cgroup_fd, enum bpf_attach_type type,
 	}
 
 	for (iter = 0; iter < prog_cnt; iter++)
-		show_bpf_prog(prog_ids[iter], attach_type_strings[type],
+		show_bpf_prog(prog_ids[iter], type,
 			      attach_flags_str, level);
 
 	return 0;
diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c
index f2223dbdfb0a..c47bdc65de8e 100644
--- a/tools/bpf/bpftool/common.c
+++ b/tools/bpf/bpftool/common.c
@@ -262,6 +262,8 @@ int get_fd_type(int fd)
 		return BPF_OBJ_MAP;
 	else if (strstr(buf, "bpf-prog"))
 		return BPF_OBJ_PROG;
+	else if (strstr(buf, "bpf-link"))
+		return BPF_OBJ_LINK;
 
 	return BPF_OBJ_UNKNOWN;
 }
diff --git a/tools/bpf/bpftool/feature.c b/tools/bpf/bpftool/feature.c
index 88718ee6a438..f54347f55ee0 100644
--- a/tools/bpf/bpftool/feature.c
+++ b/tools/bpf/bpftool/feature.c
@@ -6,6 +6,9 @@
 #include <string.h>
 #include <unistd.h>
 #include <net/if.h>
+#ifdef USE_LIBCAP
+#include <sys/capability.h>
+#endif
 #include <sys/utsname.h>
 #include <sys/vfs.h>
 
@@ -35,6 +38,11 @@ static const char * const helper_name[] = {
 
 #undef BPF_HELPER_MAKE_ENTRY
 
+static bool full_mode;
+#ifdef USE_LIBCAP
+static bool run_as_unprivileged;
+#endif
+
 /* Miscellaneous utility functions */
 
 static bool check_procfs(void)
@@ -471,6 +479,13 @@ probe_prog_type(enum bpf_prog_type prog_type, bool *supported_types,
 		}
 
 	res = bpf_probe_prog_type(prog_type, ifindex);
+#ifdef USE_LIBCAP
+	/* Probe may succeed even if program load fails, for unprivileged users
+	 * check that we did not fail because of insufficient permissions
+	 */
+	if (run_as_unprivileged && errno == EPERM)
+		res = false;
+#endif
 
 	supported_types[prog_type] |= res;
 
@@ -499,6 +514,10 @@ probe_map_type(enum bpf_map_type map_type, const char *define_prefix,
 
 	res = bpf_probe_map_type(map_type, ifindex);
 
+	/* Probe result depends on the success of map creation, no additional
+	 * check required for unprivileged users
+	 */
+
 	maxlen = sizeof(plain_desc) - strlen(plain_comment) - 1;
 	if (strlen(map_type_name[map_type]) > maxlen) {
 		p_info("map type name too long");
@@ -518,12 +537,19 @@ probe_helper_for_progtype(enum bpf_prog_type prog_type, bool supported_type,
 			  const char *define_prefix, unsigned int id,
 			  const char *ptype_name, __u32 ifindex)
 {
-	bool res;
+	bool res = false;
 
-	if (!supported_type)
-		res = false;
-	else
+	if (supported_type) {
 		res = bpf_probe_helper(id, prog_type, ifindex);
+#ifdef USE_LIBCAP
+		/* Probe may succeed even if program load fails, for
+		 * unprivileged users check that we did not fail because of
+		 * insufficient permissions
+		 */
+		if (run_as_unprivileged && errno == EPERM)
+			res = false;
+#endif
+	}
 
 	if (json_output) {
 		if (res)
@@ -540,8 +566,7 @@ probe_helper_for_progtype(enum bpf_prog_type prog_type, bool supported_type,
 
 static void
 probe_helpers_for_progtype(enum bpf_prog_type prog_type, bool supported_type,
-			   const char *define_prefix, bool full_mode,
-			   __u32 ifindex)
+			   const char *define_prefix, __u32 ifindex)
 {
 	const char *ptype_name = prog_type_name[prog_type];
 	char feat_name[128];
@@ -678,8 +703,7 @@ static void section_map_types(const char *define_prefix, __u32 ifindex)
 }
 
 static void
-section_helpers(bool *supported_types, const char *define_prefix,
-		bool full_mode, __u32 ifindex)
+section_helpers(bool *supported_types, const char *define_prefix, __u32 ifindex)
 {
 	unsigned int i;
 
@@ -704,8 +728,8 @@ section_helpers(bool *supported_types, const char *define_prefix,
 		       define_prefix, define_prefix, define_prefix,
 		       define_prefix);
 	for (i = BPF_PROG_TYPE_UNSPEC + 1; i < ARRAY_SIZE(prog_type_name); i++)
-		probe_helpers_for_progtype(i, supported_types[i],
-					   define_prefix, full_mode, ifindex);
+		probe_helpers_for_progtype(i, supported_types[i], define_prefix,
+					   ifindex);
 
 	print_end_section();
 }
@@ -720,23 +744,86 @@ static void section_misc(const char *define_prefix, __u32 ifindex)
 	print_end_section();
 }
 
-static int do_probe(int argc, char **argv)
+static int handle_perms(void)
 {
-	enum probe_component target = COMPONENT_UNSPEC;
-	const char *define_prefix = NULL;
-	bool supported_types[128] = {};
-	bool full_mode = false;
-	__u32 ifindex = 0;
-	char *ifname;
+#ifdef USE_LIBCAP
+	cap_value_t cap_list[1] = { CAP_SYS_ADMIN };
+	bool has_sys_admin_cap = false;
+	cap_flag_value_t val;
+	int res = -1;
+	cap_t caps;
+
+	caps = cap_get_proc();
+	if (!caps) {
+		p_err("failed to get capabilities for process: %s",
+		      strerror(errno));
+		return -1;
+	}
+
+	if (cap_get_flag(caps, CAP_SYS_ADMIN, CAP_EFFECTIVE, &val)) {
+		p_err("bug: failed to retrieve CAP_SYS_ADMIN status");
+		goto exit_free;
+	}
+	if (val == CAP_SET)
+		has_sys_admin_cap = true;
+
+	if (!run_as_unprivileged && !has_sys_admin_cap) {
+		p_err("full feature probing requires CAP_SYS_ADMIN, run as root or use 'unprivileged'");
+		goto exit_free;
+	}
+
+	if ((run_as_unprivileged && !has_sys_admin_cap) ||
+	    (!run_as_unprivileged && has_sys_admin_cap)) {
+		/* We are all good, exit now */
+		res = 0;
+		goto exit_free;
+	}
 
+	/* if (run_as_unprivileged && has_sys_admin_cap), drop CAP_SYS_ADMIN */
+
+	if (cap_set_flag(caps, CAP_EFFECTIVE, ARRAY_SIZE(cap_list), cap_list,
+			 CAP_CLEAR)) {
+		p_err("bug: failed to clear CAP_SYS_ADMIN from capabilities");
+		goto exit_free;
+	}
+
+	if (cap_set_proc(caps)) {
+		p_err("failed to drop CAP_SYS_ADMIN: %s", strerror(errno));
+		goto exit_free;
+	}
+
+	res = 0;
+
+exit_free:
+	if (cap_free(caps) && !res) {
+		p_err("failed to clear storage object for capabilities: %s",
+		      strerror(errno));
+		res = -1;
+	}
+
+	return res;
+#else
 	/* Detection assumes user has sufficient privileges (CAP_SYS_ADMIN).
-	 * Let's approximate, and restrict usage to root user only.
+	 * We do not use libpcap so let's approximate, and restrict usage to
+	 * root user only.
 	 */
 	if (geteuid()) {
-		p_err("please run this command as root user");
+		p_err("full feature probing requires root privileges");
 		return -1;
 	}
 
+	return 0;
+#endif /* USE_LIBCAP */
+}
+
+static int do_probe(int argc, char **argv)
+{
+	enum probe_component target = COMPONENT_UNSPEC;
+	const char *define_prefix = NULL;
+	bool supported_types[128] = {};
+	__u32 ifindex = 0;
+	char *ifname;
+
 	set_max_rlimit();
 
 	while (argc) {
@@ -785,6 +872,14 @@ static int do_probe(int argc, char **argv)
 			if (!REQ_ARGS(1))
 				return -1;
 			define_prefix = GET_ARG();
+		} else if (is_prefix(*argv, "unprivileged")) {
+#ifdef USE_LIBCAP
+			run_as_unprivileged = true;
+			NEXT_ARG();
+#else
+			p_err("unprivileged run not supported, recompile bpftool with libcap");
+			return -1;
+#endif
 		} else {
 			p_err("expected no more arguments, 'kernel', 'dev', 'macros' or 'prefix', got: '%s'?",
 			      *argv);
@@ -792,6 +887,12 @@ static int do_probe(int argc, char **argv)
 		}
 	}
 
+	/* Full feature detection requires CAP_SYS_ADMIN privilege.
+	 * Let's approximate, and warn if user is not root.
+	 */
+	if (handle_perms())
+		return -1;
+
 	if (json_output) {
 		define_prefix = NULL;
 		jsonw_start_object(json_wtr);
@@ -803,7 +904,7 @@ static int do_probe(int argc, char **argv)
 		goto exit_close_json;
 	section_program_types(supported_types, define_prefix, ifindex);
 	section_map_types(define_prefix, ifindex);
-	section_helpers(supported_types, define_prefix, full_mode, ifindex);
+	section_helpers(supported_types, define_prefix, ifindex);
 	section_misc(define_prefix, ifindex);
 
 exit_close_json:
@@ -822,7 +923,7 @@ static int do_help(int argc, char **argv)
 	}
 
 	fprintf(stderr,
-		"Usage: %s %s probe [COMPONENT] [full] [macros [prefix PREFIX]]\n"
+		"Usage: %s %s probe [COMPONENT] [full] [unprivileged] [macros [prefix PREFIX]]\n"
 		"       %s %s help\n"
 		"\n"
 		"       COMPONENT := { kernel | dev NAME }\n"
diff --git a/tools/bpf/bpftool/gen.c b/tools/bpf/bpftool/gen.c
index f8113b3646f5..0e5f0236cc76 100644
--- a/tools/bpf/bpftool/gen.c
+++ b/tools/bpf/bpftool/gen.c
@@ -17,7 +17,6 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <sys/mman.h>
-#include <unistd.h>
 #include <bpf/btf.h>
 
 #include "bpf/libbpf_internal.h"
diff --git a/tools/bpf/bpftool/jit_disasm.c b/tools/bpf/bpftool/jit_disasm.c
index f7f5885aa3ba..e7e7eee9f172 100644
--- a/tools/bpf/bpftool/jit_disasm.c
+++ b/tools/bpf/bpftool/jit_disasm.c
@@ -15,7 +15,6 @@
 #include <stdio.h>
 #include <stdarg.h>
 #include <stdint.h>
-#include <stdio.h>
 #include <stdlib.h>
 #include <assert.h>
 #include <unistd.h>
diff --git a/tools/bpf/bpftool/link.c b/tools/bpf/bpftool/link.c
new file mode 100644
index 000000000000..adc7dc431ed8
--- /dev/null
+++ b/tools/bpf/bpftool/link.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/* Copyright (C) 2020 Facebook */
+
+#include <errno.h>
+#include <net/if.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#include <bpf/bpf.h>
+
+#include "json_writer.h"
+#include "main.h"
+
+static const char * const link_type_name[] = {
+	[BPF_LINK_TYPE_UNSPEC]			= "unspec",
+	[BPF_LINK_TYPE_RAW_TRACEPOINT]		= "raw_tracepoint",
+	[BPF_LINK_TYPE_TRACING]			= "tracing",
+	[BPF_LINK_TYPE_CGROUP]			= "cgroup",
+};
+
+static int link_parse_fd(int *argc, char ***argv)
+{
+	if (is_prefix(**argv, "id")) {
+		unsigned int id;
+		char *endptr;
+
+		NEXT_ARGP();
+
+		id = strtoul(**argv, &endptr, 0);
+		if (*endptr) {
+			p_err("can't parse %s as ID", **argv);
+			return -1;
+		}
+		NEXT_ARGP();
+
+		return bpf_link_get_fd_by_id(id);
+	} else if (is_prefix(**argv, "pinned")) {
+		char *path;
+
+		NEXT_ARGP();
+
+		path = **argv;
+		NEXT_ARGP();
+
+		return open_obj_pinned_any(path, BPF_OBJ_LINK);
+	}
+
+	p_err("expected 'id' or 'pinned', got: '%s'?", **argv);
+	return -1;
+}
+
+static void
+show_link_header_json(struct bpf_link_info *info, json_writer_t *wtr)
+{
+	jsonw_uint_field(wtr, "id", info->id);
+	if (info->type < ARRAY_SIZE(link_type_name))
+		jsonw_string_field(wtr, "type", link_type_name[info->type]);
+	else
+		jsonw_uint_field(wtr, "type", info->type);
+
+	jsonw_uint_field(json_wtr, "prog_id", info->prog_id);
+}
+
+static int get_prog_info(int prog_id, struct bpf_prog_info *info)
+{
+	__u32 len = sizeof(*info);
+	int err, prog_fd;
+
+	prog_fd = bpf_prog_get_fd_by_id(prog_id);
+	if (prog_fd < 0)
+		return prog_fd;
+
+	memset(info, 0, sizeof(*info));
+	err = bpf_obj_get_info_by_fd(prog_fd, info, &len);
+	if (err)
+		p_err("can't get prog info: %s", strerror(errno));
+	close(prog_fd);
+	return err;
+}
+
+static int show_link_close_json(int fd, struct bpf_link_info *info)
+{
+	struct bpf_prog_info prog_info;
+	int err;
+
+	jsonw_start_object(json_wtr);
+
+	show_link_header_json(info, json_wtr);
+
+	switch (info->type) {
+	case BPF_LINK_TYPE_RAW_TRACEPOINT:
+		jsonw_string_field(json_wtr, "tp_name",
+				   (const char *)info->raw_tracepoint.tp_name);
+		break;
+	case BPF_LINK_TYPE_TRACING:
+		err = get_prog_info(info->prog_id, &prog_info);
+		if (err)
+			return err;
+
+		if (prog_info.type < ARRAY_SIZE(prog_type_name))
+			jsonw_string_field(json_wtr, "prog_type",
+					   prog_type_name[prog_info.type]);
+		else
+			jsonw_uint_field(json_wtr, "prog_type",
+					 prog_info.type);
+
+		if (info->tracing.attach_type < ARRAY_SIZE(attach_type_name))
+			jsonw_string_field(json_wtr, "attach_type",
+			       attach_type_name[info->tracing.attach_type]);
+		else
+			jsonw_uint_field(json_wtr, "attach_type",
+					 info->tracing.attach_type);
+		break;
+	case BPF_LINK_TYPE_CGROUP:
+		jsonw_lluint_field(json_wtr, "cgroup_id",
+				   info->cgroup.cgroup_id);
+		if (info->cgroup.attach_type < ARRAY_SIZE(attach_type_name))
+			jsonw_string_field(json_wtr, "attach_type",
+			       attach_type_name[info->cgroup.attach_type]);
+		else
+			jsonw_uint_field(json_wtr, "attach_type",
+					 info->cgroup.attach_type);
+		break;
+	default:
+		break;
+	}
+
+	if (!hash_empty(link_table.table)) {
+		struct pinned_obj *obj;
+
+		jsonw_name(json_wtr, "pinned");
+		jsonw_start_array(json_wtr);
+		hash_for_each_possible(link_table.table, obj, hash, info->id) {
+			if (obj->id == info->id)
+				jsonw_string(json_wtr, obj->path);
+		}
+		jsonw_end_array(json_wtr);
+	}
+	jsonw_end_object(json_wtr);
+
+	return 0;
+}
+
+static void show_link_header_plain(struct bpf_link_info *info)
+{
+	printf("%u: ", info->id);
+	if (info->type < ARRAY_SIZE(link_type_name))
+		printf("%s  ", link_type_name[info->type]);
+	else
+		printf("type %u  ", info->type);
+
+	printf("prog %u  ", info->prog_id);
+}
+
+static int show_link_close_plain(int fd, struct bpf_link_info *info)
+{
+	struct bpf_prog_info prog_info;
+	int err;
+
+	show_link_header_plain(info);
+
+	switch (info->type) {
+	case BPF_LINK_TYPE_RAW_TRACEPOINT:
+		printf("\n\ttp '%s'  ",
+		       (const char *)info->raw_tracepoint.tp_name);
+		break;
+	case BPF_LINK_TYPE_TRACING:
+		err = get_prog_info(info->prog_id, &prog_info);
+		if (err)
+			return err;
+
+		if (prog_info.type < ARRAY_SIZE(prog_type_name))
+			printf("\n\tprog_type %s  ",
+			       prog_type_name[prog_info.type]);
+		else
+			printf("\n\tprog_type %u  ", prog_info.type);
+
+		if (info->tracing.attach_type < ARRAY_SIZE(attach_type_name))
+			printf("attach_type %s  ",
+			       attach_type_name[info->tracing.attach_type]);
+		else
+			printf("attach_type %u  ", info->tracing.attach_type);
+		break;
+	case BPF_LINK_TYPE_CGROUP:
+		printf("\n\tcgroup_id %zu  ", (size_t)info->cgroup.cgroup_id);
+		if (info->cgroup.attach_type < ARRAY_SIZE(attach_type_name))
+			printf("attach_type %s  ",
+			       attach_type_name[info->cgroup.attach_type]);
+		else
+			printf("attach_type %u  ", info->cgroup.attach_type);
+		break;
+	default:
+		break;
+	}
+
+	if (!hash_empty(link_table.table)) {
+		struct pinned_obj *obj;
+
+		hash_for_each_possible(link_table.table, obj, hash, info->id) {
+			if (obj->id == info->id)
+				printf("\n\tpinned %s", obj->path);
+		}
+	}
+
+	printf("\n");
+
+	return 0;
+}
+
+static int do_show_link(int fd)
+{
+	struct bpf_link_info info;
+	__u32 len = sizeof(info);
+	char raw_tp_name[256];
+	int err;
+
+	memset(&info, 0, sizeof(info));
+again:
+	err = bpf_obj_get_info_by_fd(fd, &info, &len);
+	if (err) {
+		p_err("can't get link info: %s",
+		      strerror(errno));
+		close(fd);
+		return err;
+	}
+	if (info.type == BPF_LINK_TYPE_RAW_TRACEPOINT &&
+	    !info.raw_tracepoint.tp_name) {
+		info.raw_tracepoint.tp_name = (unsigned long)&raw_tp_name;
+		info.raw_tracepoint.tp_name_len = sizeof(raw_tp_name);
+		goto again;
+	}
+
+	if (json_output)
+		show_link_close_json(fd, &info);
+	else
+		show_link_close_plain(fd, &info);
+
+	close(fd);
+	return 0;
+}
+
+static int do_show(int argc, char **argv)
+{
+	__u32 id = 0;
+	int err, fd;
+
+	if (show_pinned)
+		build_pinned_obj_table(&link_table, BPF_OBJ_LINK);
+
+	if (argc == 2) {
+		fd = link_parse_fd(&argc, &argv);
+		if (fd < 0)
+			return fd;
+		return do_show_link(fd);
+	}
+
+	if (argc)
+		return BAD_ARG();
+
+	if (json_output)
+		jsonw_start_array(json_wtr);
+	while (true) {
+		err = bpf_link_get_next_id(id, &id);
+		if (err) {
+			if (errno == ENOENT)
+				break;
+			p_err("can't get next link: %s%s", strerror(errno),
+			      errno == EINVAL ? " -- kernel too old?" : "");
+			break;
+		}
+
+		fd = bpf_link_get_fd_by_id(id);
+		if (fd < 0) {
+			if (errno == ENOENT)
+				continue;
+			p_err("can't get link by id (%u): %s",
+			      id, strerror(errno));
+			break;
+		}
+
+		err = do_show_link(fd);
+		if (err)
+			break;
+	}
+	if (json_output)
+		jsonw_end_array(json_wtr);
+
+	return errno == ENOENT ? 0 : -1;
+}
+
+static int do_pin(int argc, char **argv)
+{
+	int err;
+
+	err = do_pin_any(argc, argv, link_parse_fd);
+	if (!err && json_output)
+		jsonw_null(json_wtr);
+	return err;
+}
+
+static int do_help(int argc, char **argv)
+{
+	if (json_output) {
+		jsonw_null(json_wtr);
+		return 0;
+	}
+
+	fprintf(stderr,
+		"Usage: %1$s %2$s { show | list }   [LINK]\n"
+		"       %1$s %2$s pin        LINK  FILE\n"
+		"       %1$s %2$s help\n"
+		"\n"
+		"       " HELP_SPEC_LINK "\n"
+		"       " HELP_SPEC_PROGRAM "\n"
+		"       " HELP_SPEC_OPTIONS "\n"
+		"",
+		bin_name, argv[-2]);
+
+	return 0;
+}
+
+static const struct cmd cmds[] = {
+	{ "show",	do_show },
+	{ "list",	do_show },
+	{ "help",	do_help },
+	{ "pin",	do_pin },
+	{ 0 }
+};
+
+int do_link(int argc, char **argv)
+{
+	return cmd_select(cmds, argc, argv, do_help);
+}
diff --git a/tools/bpf/bpftool/main.c b/tools/bpf/bpftool/main.c
index 466c269eabdd..1413a154806e 100644
--- a/tools/bpf/bpftool/main.c
+++ b/tools/bpf/bpftool/main.c
@@ -30,6 +30,7 @@ bool verifier_logs;
 bool relaxed_maps;
 struct pinned_obj_table prog_table;
 struct pinned_obj_table map_table;
+struct pinned_obj_table link_table;
 
 static void __noreturn clean_and_exit(int i)
 {
@@ -58,7 +59,7 @@ static int do_help(int argc, char **argv)
 		"       %s batch file FILE\n"
 		"       %s version\n"
 		"\n"
-		"       OBJECT := { prog | map | cgroup | perf | net | feature | btf | gen | struct_ops }\n"
+		"       OBJECT := { prog | map | link | cgroup | perf | net | feature | btf | gen | struct_ops }\n"
 		"       " HELP_SPEC_OPTIONS "\n"
 		"",
 		bin_name, bin_name, bin_name);
@@ -215,6 +216,7 @@ static const struct cmd cmds[] = {
 	{ "batch",	do_batch },
 	{ "prog",	do_prog },
 	{ "map",	do_map },
+	{ "link",	do_link },
 	{ "cgroup",	do_cgroup },
 	{ "perf",	do_perf },
 	{ "net",	do_net },
@@ -364,6 +366,7 @@ int main(int argc, char **argv)
 
 	hash_init(prog_table.table);
 	hash_init(map_table.table);
+	hash_init(link_table.table);
 
 	opterr = 0;
 	while ((opt = getopt_long(argc, argv, "Vhpjfmnd",
@@ -422,6 +425,7 @@ int main(int argc, char **argv)
 	if (show_pinned) {
 		delete_pinned_obj_table(&prog_table);
 		delete_pinned_obj_table(&map_table);
+		delete_pinned_obj_table(&link_table);
 	}
 
 	return ret;
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index 86f14ce26fd7..9b1fb81a8331 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -50,6 +50,8 @@
 	"\t            {-m|--mapcompat} | {-n|--nomount} }"
 #define HELP_SPEC_MAP							\
 	"MAP := { id MAP_ID | pinned FILE | name MAP_NAME }"
+#define HELP_SPEC_LINK							\
+	"LINK := { id LINK_ID | pinned FILE }"
 
 static const char * const prog_type_name[] = {
 	[BPF_PROG_TYPE_UNSPEC]			= "unspec",
@@ -83,6 +85,38 @@ static const char * const prog_type_name[] = {
 	[BPF_PROG_TYPE_EXT]			= "ext",
 };
 
+static const char * const attach_type_name[__MAX_BPF_ATTACH_TYPE] = {
+	[BPF_CGROUP_INET_INGRESS] = "ingress",
+	[BPF_CGROUP_INET_EGRESS] = "egress",
+	[BPF_CGROUP_INET_SOCK_CREATE] = "sock_create",
+	[BPF_CGROUP_SOCK_OPS] = "sock_ops",
+	[BPF_CGROUP_DEVICE] = "device",
+	[BPF_CGROUP_INET4_BIND] = "bind4",
+	[BPF_CGROUP_INET6_BIND] = "bind6",
+	[BPF_CGROUP_INET4_CONNECT] = "connect4",
+	[BPF_CGROUP_INET6_CONNECT] = "connect6",
+	[BPF_CGROUP_INET4_POST_BIND] = "post_bind4",
+	[BPF_CGROUP_INET6_POST_BIND] = "post_bind6",
+	[BPF_CGROUP_UDP4_SENDMSG] = "sendmsg4",
+	[BPF_CGROUP_UDP6_SENDMSG] = "sendmsg6",
+	[BPF_CGROUP_SYSCTL] = "sysctl",
+	[BPF_CGROUP_UDP4_RECVMSG] = "recvmsg4",
+	[BPF_CGROUP_UDP6_RECVMSG] = "recvmsg6",
+	[BPF_CGROUP_GETSOCKOPT] = "getsockopt",
+	[BPF_CGROUP_SETSOCKOPT] = "setsockopt",
+
+	[BPF_SK_SKB_STREAM_PARSER] = "sk_skb_stream_parser",
+	[BPF_SK_SKB_STREAM_VERDICT] = "sk_skb_stream_verdict",
+	[BPF_SK_MSG_VERDICT] = "sk_msg_verdict",
+	[BPF_LIRC_MODE2] = "lirc_mode2",
+	[BPF_FLOW_DISSECTOR] = "flow_dissector",
+	[BPF_TRACE_RAW_TP] = "raw_tp",
+	[BPF_TRACE_FENTRY] = "fentry",
+	[BPF_TRACE_FEXIT] = "fexit",
+	[BPF_MODIFY_RETURN] = "mod_ret",
+	[BPF_LSM_MAC] = "lsm_mac",
+};
+
 extern const char * const map_type_name[];
 extern const size_t map_type_name_size;
 
@@ -90,6 +124,7 @@ enum bpf_obj_type {
 	BPF_OBJ_UNKNOWN,
 	BPF_OBJ_PROG,
 	BPF_OBJ_MAP,
+	BPF_OBJ_LINK,
 };
 
 extern const char *bin_name;
@@ -102,6 +137,7 @@ extern bool verifier_logs;
 extern bool relaxed_maps;
 extern struct pinned_obj_table prog_table;
 extern struct pinned_obj_table map_table;
+extern struct pinned_obj_table link_table;
 
 void __printf(1, 2) p_err(const char *fmt, ...);
 void __printf(1, 2) p_info(const char *fmt, ...);
@@ -153,6 +189,7 @@ int do_pin_fd(int fd, const char *name);
 
 int do_prog(int argc, char **arg);
 int do_map(int argc, char **arg);
+int do_link(int argc, char **arg);
 int do_event_pipe(int argc, char **argv);
 int do_cgroup(int argc, char **arg);
 int do_perf(int argc, char **arg);
diff --git a/tools/include/linux/kallsyms.h b/tools/include/linux/kallsyms.h
index 89ca6fe257cc..efb6c3f5f2a9 100644
--- a/tools/include/linux/kallsyms.h
+++ b/tools/include/linux/kallsyms.h
@@ -20,7 +20,7 @@ static inline const char *kallsyms_lookup(unsigned long addr,
 
 #include <execinfo.h>
 #include <stdlib.h>
-static inline void print_ip_sym(unsigned long ip)
+static inline void print_ip_sym(const char *loglvl, unsigned long ip)
 {
 	char **name;
 
diff --git a/tools/include/linux/rbtree.h b/tools/include/linux/rbtree.h
index e03b1ea23e0e..30dd21f976c3 100644
--- a/tools/include/linux/rbtree.h
+++ b/tools/include/linux/rbtree.h
@@ -11,7 +11,7 @@
   I know it's not the cleaner way,  but in C (not in C++) to get
   performances and genericity...
 
-  See Documentation/rbtree.txt for documentation and samples.
+  See Documentation/core-api/rbtree.rst for documentation and samples.
 */
 
 #ifndef __TOOLS_LINUX_PERF_RBTREE_H
diff --git a/tools/include/linux/rbtree_augmented.h b/tools/include/linux/rbtree_augmented.h
index 381aa948610d..570bb9794421 100644
--- a/tools/include/linux/rbtree_augmented.h
+++ b/tools/include/linux/rbtree_augmented.h
@@ -23,7 +23,7 @@
  * rb_insert_augmented() and rb_erase_augmented() are intended to be public.
  * The rest are implementation details you are not expected to depend on.
  *
- * See Documentation/rbtree.txt for documentation and samples.
+ * See Documentation/core-api/rbtree.rst for documentation and samples.
  */
 
 struct rb_augment_callbacks {
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 7bbf1b65be10..0eccafae55bb 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -113,6 +113,8 @@ enum bpf_cmd {
 	BPF_MAP_DELETE_BATCH,
 	BPF_LINK_CREATE,
 	BPF_LINK_UPDATE,
+	BPF_LINK_GET_FD_BY_ID,
+	BPF_LINK_GET_NEXT_ID,
 };
 
 enum bpf_map_type {
@@ -220,6 +222,15 @@ enum bpf_attach_type {
 
 #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
 
+enum bpf_link_type {
+	BPF_LINK_TYPE_UNSPEC = 0,
+	BPF_LINK_TYPE_RAW_TRACEPOINT = 1,
+	BPF_LINK_TYPE_TRACING = 2,
+	BPF_LINK_TYPE_CGROUP = 3,
+
+	MAX_BPF_LINK_TYPE,
+};
+
 /* cgroup-bpf attach flags used in BPF_PROG_ATTACH command
  *
  * NONE(default): No further bpf programs allowed in the subtree.
@@ -523,6 +534,7 @@ union bpf_attr {
 			__u32		prog_id;
 			__u32		map_id;
 			__u32		btf_id;
+			__u32		link_id;
 		};
 		__u32		next_id;
 		__u32		open_flags;
@@ -652,6 +664,8 @@ union bpf_attr {
  * u64 bpf_ktime_get_ns(void)
  * 	Description
  * 		Return the time elapsed since system boot, in nanoseconds.
+ * 		Does not include time the system was suspended.
+ * 		See: clock_gettime(CLOCK_MONOTONIC)
  * 	Return
  * 		Current *ktime*.
  *
@@ -3025,6 +3039,14 @@ union bpf_attr {
  *		* **-EOPNOTSUPP**	Unsupported operation, for example a
  *					call from outside of TC ingress.
  *		* **-ESOCKTNOSUPPORT**	Socket type not supported (reuseport).
+ *
+ * u64 bpf_ktime_get_boot_ns(void)
+ * 	Description
+ * 		Return the time elapsed since system boot, in nanoseconds.
+ * 		Does include the time the system was suspended.
+ * 		See: clock_gettime(CLOCK_BOOTTIME)
+ * 	Return
+ * 		Current *ktime*.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -3151,7 +3173,8 @@ union bpf_attr {
 	FN(xdp_output),			\
 	FN(get_netns_cookie),		\
 	FN(get_current_ancestor_cgroup_id),	\
-	FN(sk_assign),
+	FN(sk_assign),			\
+	FN(ktime_get_boot_ns),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -3598,6 +3621,25 @@ struct bpf_btf_info {
 	__u32 id;
 } __attribute__((aligned(8)));
 
+struct bpf_link_info {
+	__u32 type;
+	__u32 id;
+	__u32 prog_id;
+	union {
+		struct {
+			__aligned_u64 tp_name; /* in/out: tp_name buffer ptr */
+			__u32 tp_name_len;     /* in/out: tp_name buffer len */
+		} raw_tracepoint;
+		struct {
+			__u32 attach_type;
+		} tracing;
+		struct {
+			__u64 cgroup_id;
+			__u32 attach_type;
+		} cgroup;
+	};
+} __attribute__((aligned(8)));
+
 /* User bpf_sock_addr struct to access socket fields and sockaddr struct passed
  * by user and intended to be used by socket (e.g. to bind to, depends on
  * attach attach type).
diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h
index ca6665ea758a..cafedbbfefbe 100644
--- a/tools/include/uapi/linux/if_link.h
+++ b/tools/include/uapi/linux/if_link.h
@@ -343,6 +343,7 @@ enum {
 	IFLA_BRPORT_NEIGH_SUPPRESS,
 	IFLA_BRPORT_ISOLATED,
 	IFLA_BRPORT_BACKUP_PORT,
+	IFLA_BRPORT_MRP_RING_OPEN,
 	__IFLA_BRPORT_MAX
 };
 #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h
index 428c7dde6b4b..fdd632c833b4 100644
--- a/tools/include/uapi/linux/kvm.h
+++ b/tools/include/uapi/linux/kvm.h
@@ -116,7 +116,7 @@ struct kvm_irq_level {
 	 * ACPI gsi notion of irq.
 	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
 	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
-	 * For ARM: See Documentation/virt/kvm/api.txt
+	 * For ARM: See Documentation/virt/kvm/api.rst
 	 */
 	union {
 		__u32 irq;
@@ -1107,7 +1107,7 @@ struct kvm_xen_hvm_config {
  *
  * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
  * the irqfd to operate in resampling mode for level triggered interrupt
- * emulation.  See Documentation/virt/kvm/api.txt.
+ * emulation.  See Documentation/virt/kvm/api.rst.
  */
 #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
 
diff --git a/tools/kvm/kvm_stat/kvm_stat b/tools/kvm/kvm_stat/kvm_stat
index e83fc8e868f4..d199a3694be8 100755
--- a/tools/kvm/kvm_stat/kvm_stat
+++ b/tools/kvm/kvm_stat/kvm_stat
@@ -32,6 +32,7 @@ import resource
 import struct
 import re
 import subprocess
+import signal
 from collections import defaultdict, namedtuple
 from functools import reduce
 from datetime import datetime
@@ -228,6 +229,8 @@ IOCTL_NUMBERS = {
     'RESET':       0x00002403,
 }
 
+signal_received = False
+
 ENCODING = locale.getpreferredencoding(False)
 TRACE_FILTER = re.compile(r'^[^\(]*$')
 
@@ -1500,8 +1503,7 @@ class StdFormat(object):
     def get_banner(self):
         return self._banner
 
-    @staticmethod
-    def get_statline(keys, s):
+    def get_statline(self, keys, s):
         res = ''
         for key in keys:
             res += ' %9d' % s[key].delta
@@ -1517,27 +1519,71 @@ class CSVFormat(object):
     def get_banner(self):
         return self._banner
 
-    @staticmethod
-    def get_statline(keys, s):
+    def get_statline(self, keys, s):
         return reduce(lambda res, key: "{},{!s}".format(res, s[key].delta),
                       keys, '')
 
 
 def log(stats, opts, frmt, keys):
     """Prints statistics as reiterating key block, multiple value blocks."""
+    global signal_received
     line = 0
     banner_repeat = 20
+    f = None
+
+    def do_banner(opts):
+        nonlocal f
+        if opts.log_to_file:
+            if not f:
+                try:
+                     f = open(opts.log_to_file, 'a')
+                except (IOError, OSError):
+                    sys.exit("Error: Could not open file: %s" %
+                             opts.log_to_file)
+                if isinstance(frmt, CSVFormat) and f.tell() != 0:
+                    return
+        print(frmt.get_banner(), file=f or sys.stdout)
+
+    def do_statline(opts, values):
+        statline = datetime.now().strftime("%Y-%m-%d %H:%M:%S") + \
+                   frmt.get_statline(keys, values)
+        print(statline, file=f or sys.stdout)
+
+    do_banner(opts)
+    banner_printed = True
     while True:
         try:
             time.sleep(opts.set_delay)
-            if line % banner_repeat == 0:
-                print(frmt.get_banner())
-            print(datetime.now().strftime("%Y-%m-%d %H:%M:%S") +
-                  frmt.get_statline(keys, stats.get()))
-            line += 1
+            if signal_received:
+                banner_printed = True
+                line = 0
+                f.close()
+                do_banner(opts)
+                signal_received = False
+            if (line % banner_repeat == 0 and not banner_printed and
+                not (opts.log_to_file and isinstance(frmt, CSVFormat))):
+                do_banner(opts)
+                banner_printed = True
+            values = stats.get()
+            if (not opts.skip_zero_records or
+                any(values[k].delta != 0 for k in keys)):
+                do_statline(opts, values)
+                line += 1
+                banner_printed = False
         except KeyboardInterrupt:
             break
 
+    if opts.log_to_file:
+        f.close()
+
+
+def handle_signal(sig, frame):
+    global signal_received
+
+    signal_received = True
+
+    return
+
 
 def is_delay_valid(delay):
     """Verify delay is in valid value range."""
@@ -1610,7 +1656,7 @@ Press any other key to refresh statistics immediately.
     argparser.add_argument('-c', '--csv',
                            action='store_true',
                            default=False,
-                           help='log in csv format - requires option -l/--log',
+                           help='log in csv format - requires option -l/-L',
                            )
     argparser.add_argument('-d', '--debugfs',
                            action='store_true',
@@ -1638,6 +1684,11 @@ Press any other key to refresh statistics immediately.
                            default=False,
                            help='run in logging mode (like vmstat)',
                            )
+    argparser.add_argument('-L', '--log-to-file',
+                           type=str,
+                           metavar='FILE',
+                           help="like '--log', but logging to a file"
+                           )
     argparser.add_argument('-p', '--pid',
                            type=int,
                            default=0,
@@ -1655,9 +1706,16 @@ Press any other key to refresh statistics immediately.
                            default=False,
                            help='retrieve statistics from tracepoints',
                            )
+    argparser.add_argument('-z', '--skip-zero-records',
+                           action='store_true',
+                           default=False,
+                           help='omit records with all zeros in logging mode',
+                           )
     options = argparser.parse_args()
-    if options.csv and not options.log:
+    if options.csv and not (options.log or options.log_to_file):
         sys.exit('Error: Option -c/--csv requires -l/--log')
+    if options.skip_zero_records and not (options.log or options.log_to_file):
+        sys.exit('Error: Option -z/--skip-zero-records requires -l/-L')
     try:
         # verify that we were passed a valid regex up front
         re.compile(options.fields)
@@ -1737,7 +1795,9 @@ def main():
         sys.stdout.write('  ' + '\n  '.join(sorted(set(event_list))) + '\n')
         sys.exit(0)
 
-    if options.log:
+    if options.log or options.log_to_file:
+        if options.log_to_file:
+            signal.signal(signal.SIGHUP, handle_signal)
         keys = sorted(stats.get().keys())
         if options.csv:
             frmt = CSVFormat(keys)
diff --git a/tools/kvm/kvm_stat/kvm_stat.service b/tools/kvm/kvm_stat/kvm_stat.service
new file mode 100644
index 000000000000..71aabaffe779
--- /dev/null
+++ b/tools/kvm/kvm_stat/kvm_stat.service
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+[Unit]
+Description=Service that logs KVM kernel module trace events
+Before=qemu-kvm.service
+
+[Service]
+Type=simple
+ExecStart=/usr/bin/kvm_stat -dtcz -s 10 -L /var/log/kvm_stat.csv
+ExecReload=/bin/kill -HUP $MAINPID
+Restart=always
+SyslogIdentifier=kvm_stat
+SyslogLevel=debug
+
+[Install]
+WantedBy=multi-user.target
diff --git a/tools/kvm/kvm_stat/kvm_stat.txt b/tools/kvm/kvm_stat/kvm_stat.txt
index a97ded2aedad..feaf46451e83 100644
--- a/tools/kvm/kvm_stat/kvm_stat.txt
+++ b/tools/kvm/kvm_stat/kvm_stat.txt
@@ -65,8 +65,10 @@ OPTIONS
 	run in batch mode for one second
 
 -c::
---csv=<file>::
-        log in csv format - requires option -l/--log
+--csv::
+        log in csv format. Requires option -l/--log or -L/--log-to-file.
+        When used with option -L/--log-to-file, the header is only ever
+        written to start of file to preserve the format.
 
 -d::
 --debugfs::
@@ -92,6 +94,11 @@ OPTIONS
 --log::
         run in logging mode (like vmstat)
 
+
+-L<file>::
+--log-to-file=<file>::
+        like -l/--log, but logging to a file. Appends to existing files.
+
 -p<pid>::
 --pid=<pid>::
 	limit statistics to one virtual machine (pid)
@@ -104,6 +111,10 @@ OPTIONS
 --tracepoints::
         retrieve statistics from tracepoints
 
+*z*::
+--skip-zero-records::
+        omit records with all zeros in logging mode
+
 SEE ALSO
 --------
 'perf'(1), 'trace-cmd'(1)
diff --git a/tools/lib/api/fs/fs.c b/tools/lib/api/fs/fs.c
index 027b18f7ed8c..82f53d81a7a7 100644
--- a/tools/lib/api/fs/fs.c
+++ b/tools/lib/api/fs/fs.c
@@ -90,6 +90,7 @@ struct fs {
 	const char * const	*mounts;
 	char			 path[PATH_MAX];
 	bool			 found;
+	bool			 checked;
 	long			 magic;
 };
 
@@ -111,31 +112,37 @@ static struct fs fs__entries[] = {
 		.name	= "sysfs",
 		.mounts	= sysfs__fs_known_mountpoints,
 		.magic	= SYSFS_MAGIC,
+		.checked = false,
 	},
 	[FS__PROCFS] = {
 		.name	= "proc",
 		.mounts	= procfs__known_mountpoints,
 		.magic	= PROC_SUPER_MAGIC,
+		.checked = false,
 	},
 	[FS__DEBUGFS] = {
 		.name	= "debugfs",
 		.mounts	= debugfs__known_mountpoints,
 		.magic	= DEBUGFS_MAGIC,
+		.checked = false,
 	},
 	[FS__TRACEFS] = {
 		.name	= "tracefs",
 		.mounts	= tracefs__known_mountpoints,
 		.magic	= TRACEFS_MAGIC,
+		.checked = false,
 	},
 	[FS__HUGETLBFS] = {
 		.name	= "hugetlbfs",
 		.mounts = hugetlbfs__known_mountpoints,
 		.magic	= HUGETLBFS_MAGIC,
+		.checked = false,
 	},
 	[FS__BPF_FS] = {
 		.name	= "bpf",
 		.mounts = bpf_fs__known_mountpoints,
 		.magic	= BPF_FS_MAGIC,
+		.checked = false,
 	},
 };
 
@@ -158,6 +165,7 @@ static bool fs__read_mounts(struct fs *fs)
 	}
 
 	fclose(fp);
+	fs->checked = true;
 	return fs->found = found;
 }
 
@@ -220,6 +228,7 @@ static bool fs__env_override(struct fs *fs)
 		return false;
 
 	fs->found = true;
+	fs->checked = true;
 	strncpy(fs->path, override_path, sizeof(fs->path) - 1);
 	fs->path[sizeof(fs->path) - 1] = '\0';
 	return true;
@@ -246,6 +255,14 @@ static const char *fs__mountpoint(int idx)
 	if (fs->found)
 		return (const char *)fs->path;
 
+	/* the mount point was already checked for the mount point
+	 * but and did not exist, so return NULL to avoid scanning again.
+	 * This makes the found and not found paths cost equivalent
+	 * in case of multiple calls.
+	 */
+	if (fs->checked)
+		return NULL;
+
 	return fs__get_mountpoint(fs);
 }
 
diff --git a/tools/lib/api/fs/fs.h b/tools/lib/api/fs/fs.h
index 936edb95e1f3..aa222ca30311 100644
--- a/tools/lib/api/fs/fs.h
+++ b/tools/lib/api/fs/fs.h
@@ -18,6 +18,18 @@
 	const char *name##__mount(void);	\
 	bool name##__configured(void);		\
 
+/*
+ * The xxxx__mountpoint() entry points find the first match mount point for each
+ * filesystems listed below, where xxxx is the filesystem type.
+ *
+ * The interface is as follows:
+ *
+ * - If a mount point is found on first call, it is cached and used for all
+ *   subsequent calls.
+ *
+ * - If a mount point is not found, NULL is returned on first call and all
+ *   subsequent calls.
+ */
 FS(sysfs)
 FS(procfs)
 FS(debugfs)
diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c
index 5cc1b0785d18..8f2f0958d446 100644
--- a/tools/lib/bpf/bpf.c
+++ b/tools/lib/bpf/bpf.c
@@ -721,6 +721,11 @@ int bpf_btf_get_next_id(__u32 start_id, __u32 *next_id)
 	return bpf_obj_get_next_id(start_id, next_id, BPF_BTF_GET_NEXT_ID);
 }
 
+int bpf_link_get_next_id(__u32 start_id, __u32 *next_id)
+{
+	return bpf_obj_get_next_id(start_id, next_id, BPF_LINK_GET_NEXT_ID);
+}
+
 int bpf_prog_get_fd_by_id(__u32 id)
 {
 	union bpf_attr attr;
@@ -751,13 +756,23 @@ int bpf_btf_get_fd_by_id(__u32 id)
 	return sys_bpf(BPF_BTF_GET_FD_BY_ID, &attr, sizeof(attr));
 }
 
-int bpf_obj_get_info_by_fd(int prog_fd, void *info, __u32 *info_len)
+int bpf_link_get_fd_by_id(__u32 id)
+{
+	union bpf_attr attr;
+
+	memset(&attr, 0, sizeof(attr));
+	attr.link_id = id;
+
+	return sys_bpf(BPF_LINK_GET_FD_BY_ID, &attr, sizeof(attr));
+}
+
+int bpf_obj_get_info_by_fd(int bpf_fd, void *info, __u32 *info_len)
 {
 	union bpf_attr attr;
 	int err;
 
 	memset(&attr, 0, sizeof(attr));
-	attr.info.bpf_fd = prog_fd;
+	attr.info.bpf_fd = bpf_fd;
 	attr.info.info_len = *info_len;
 	attr.info.info = ptr_to_u64(info);
 
diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index 46d47afdd887..335b457b3a25 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -216,10 +216,12 @@ LIBBPF_API int bpf_prog_test_run(int prog_fd, int repeat, void *data,
 LIBBPF_API int bpf_prog_get_next_id(__u32 start_id, __u32 *next_id);
 LIBBPF_API int bpf_map_get_next_id(__u32 start_id, __u32 *next_id);
 LIBBPF_API int bpf_btf_get_next_id(__u32 start_id, __u32 *next_id);
+LIBBPF_API int bpf_link_get_next_id(__u32 start_id, __u32 *next_id);
 LIBBPF_API int bpf_prog_get_fd_by_id(__u32 id);
 LIBBPF_API int bpf_map_get_fd_by_id(__u32 id);
 LIBBPF_API int bpf_btf_get_fd_by_id(__u32 id);
-LIBBPF_API int bpf_obj_get_info_by_fd(int prog_fd, void *info, __u32 *info_len);
+LIBBPF_API int bpf_link_get_fd_by_id(__u32 id);
+LIBBPF_API int bpf_obj_get_info_by_fd(int bpf_fd, void *info, __u32 *info_len);
 LIBBPF_API int bpf_prog_query(int target_fd, enum bpf_attach_type type,
 			      __u32 query_flags, __u32 *attach_flags,
 			      __u32 *prog_ids, __u32 *prog_cnt);
diff --git a/tools/lib/bpf/bpf_helpers.h b/tools/lib/bpf/bpf_helpers.h
index f69cc208778a..da00b87aa199 100644
--- a/tools/lib/bpf/bpf_helpers.h
+++ b/tools/lib/bpf/bpf_helpers.h
@@ -2,10 +2,17 @@
 #ifndef __BPF_HELPERS__
 #define __BPF_HELPERS__
 
+/*
+ * Note that bpf programs need to include either
+ * vmlinux.h (auto-generated from BTF) or linux/types.h
+ * in advance since bpf_helper_defs.h uses such types
+ * as __u64.
+ */
 #include "bpf_helper_defs.h"
 
 #define __uint(name, val) int (*name)[val]
 #define __type(name, val) typeof(val) *name
+#define __array(name, val) typeof(val) *name[]
 
 /* Helper macro to print out debug messages */
 #define bpf_printk(fmt, ...)				\
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index 0c28ee82834b..de07e559a11d 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -658,7 +658,7 @@ static void btf_dump_emit_type(struct btf_dump *d, __u32 id, __u32 cont_id)
 			if (!btf_dump_is_blacklisted(d, id)) {
 				btf_dump_emit_typedef_def(d, id, t, 0);
 				btf_dump_printf(d, ";\n\n");
-			};
+			}
 			tstate->fwd_emitted = 1;
 			break;
 		default:
diff --git a/tools/lib/bpf/hashmap.c b/tools/lib/bpf/hashmap.c
index 54c30c802070..cffb96202e0d 100644
--- a/tools/lib/bpf/hashmap.c
+++ b/tools/lib/bpf/hashmap.c
@@ -59,7 +59,14 @@ struct hashmap *hashmap__new(hashmap_hash_fn hash_fn,
 
 void hashmap__clear(struct hashmap *map)
 {
+	struct hashmap_entry *cur, *tmp;
+	int bkt;
+
+	hashmap__for_each_entry_safe(map, cur, tmp, bkt) {
+		free(cur);
+	}
 	free(map->buckets);
+	map->buckets = NULL;
 	map->cap = map->cap_bits = map->sz = 0;
 }
 
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 8f480e29a6b0..838f5e62e4f1 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -310,6 +310,7 @@ struct bpf_map {
 	int map_ifindex;
 	int inner_map_fd;
 	struct bpf_map_def def;
+	__u32 btf_var_idx;
 	__u32 btf_key_type_id;
 	__u32 btf_value_type_id;
 	__u32 btf_vmlinux_value_type_id;
@@ -318,6 +319,9 @@ struct bpf_map {
 	enum libbpf_map_type libbpf_type;
 	void *mmaped;
 	struct bpf_struct_ops *st_ops;
+	struct bpf_map *inner_map;
+	void **init_slots;
+	int init_slots_sz;
 	char *pin_path;
 	bool pinned;
 	bool reused;
@@ -389,6 +393,7 @@ struct bpf_object {
 		int nr_reloc_sects;
 		int maps_shndx;
 		int btf_maps_shndx;
+		__u32 btf_maps_sec_btf_id;
 		int text_shndx;
 		int symbols_shndx;
 		int data_shndx;
@@ -1914,109 +1919,54 @@ static int build_map_pin_path(struct bpf_map *map, const char *path)
 	return 0;
 }
 
-static int bpf_object__init_user_btf_map(struct bpf_object *obj,
-					 const struct btf_type *sec,
-					 int var_idx, int sec_idx,
-					 const Elf_Data *data, bool strict,
-					 const char *pin_root_path)
+
+static int parse_btf_map_def(struct bpf_object *obj,
+			     struct bpf_map *map,
+			     const struct btf_type *def,
+			     bool strict, bool is_inner,
+			     const char *pin_root_path)
 {
-	const struct btf_type *var, *def, *t;
-	const struct btf_var_secinfo *vi;
-	const struct btf_var *var_extra;
+	const struct btf_type *t;
 	const struct btf_member *m;
-	const char *map_name;
-	struct bpf_map *map;
 	int vlen, i;
 
-	vi = btf_var_secinfos(sec) + var_idx;
-	var = btf__type_by_id(obj->btf, vi->type);
-	var_extra = btf_var(var);
-	map_name = btf__name_by_offset(obj->btf, var->name_off);
-	vlen = btf_vlen(var);
-
-	if (map_name == NULL || map_name[0] == '\0') {
-		pr_warn("map #%d: empty name.\n", var_idx);
-		return -EINVAL;
-	}
-	if ((__u64)vi->offset + vi->size > data->d_size) {
-		pr_warn("map '%s' BTF data is corrupted.\n", map_name);
-		return -EINVAL;
-	}
-	if (!btf_is_var(var)) {
-		pr_warn("map '%s': unexpected var kind %u.\n",
-			map_name, btf_kind(var));
-		return -EINVAL;
-	}
-	if (var_extra->linkage != BTF_VAR_GLOBAL_ALLOCATED &&
-	    var_extra->linkage != BTF_VAR_STATIC) {
-		pr_warn("map '%s': unsupported var linkage %u.\n",
-			map_name, var_extra->linkage);
-		return -EOPNOTSUPP;
-	}
-
-	def = skip_mods_and_typedefs(obj->btf, var->type, NULL);
-	if (!btf_is_struct(def)) {
-		pr_warn("map '%s': unexpected def kind %u.\n",
-			map_name, btf_kind(var));
-		return -EINVAL;
-	}
-	if (def->size > vi->size) {
-		pr_warn("map '%s': invalid def size.\n", map_name);
-		return -EINVAL;
-	}
-
-	map = bpf_object__add_map(obj);
-	if (IS_ERR(map))
-		return PTR_ERR(map);
-	map->name = strdup(map_name);
-	if (!map->name) {
-		pr_warn("map '%s': failed to alloc map name.\n", map_name);
-		return -ENOMEM;
-	}
-	map->libbpf_type = LIBBPF_MAP_UNSPEC;
-	map->def.type = BPF_MAP_TYPE_UNSPEC;
-	map->sec_idx = sec_idx;
-	map->sec_offset = vi->offset;
-	pr_debug("map '%s': at sec_idx %d, offset %zu.\n",
-		 map_name, map->sec_idx, map->sec_offset);
-
 	vlen = btf_vlen(def);
 	m = btf_members(def);
 	for (i = 0; i < vlen; i++, m++) {
 		const char *name = btf__name_by_offset(obj->btf, m->name_off);
 
 		if (!name) {
-			pr_warn("map '%s': invalid field #%d.\n", map_name, i);
+			pr_warn("map '%s': invalid field #%d.\n", map->name, i);
 			return -EINVAL;
 		}
 		if (strcmp(name, "type") == 0) {
-			if (!get_map_field_int(map_name, obj->btf, m,
+			if (!get_map_field_int(map->name, obj->btf, m,
 					       &map->def.type))
 				return -EINVAL;
 			pr_debug("map '%s': found type = %u.\n",
-				 map_name, map->def.type);
+				 map->name, map->def.type);
 		} else if (strcmp(name, "max_entries") == 0) {
-			if (!get_map_field_int(map_name, obj->btf, m,
+			if (!get_map_field_int(map->name, obj->btf, m,
 					       &map->def.max_entries))
 				return -EINVAL;
 			pr_debug("map '%s': found max_entries = %u.\n",
-				 map_name, map->def.max_entries);
+				 map->name, map->def.max_entries);
 		} else if (strcmp(name, "map_flags") == 0) {
-			if (!get_map_field_int(map_name, obj->btf, m,
+			if (!get_map_field_int(map->name, obj->btf, m,
 					       &map->def.map_flags))
 				return -EINVAL;
 			pr_debug("map '%s': found map_flags = %u.\n",
-				 map_name, map->def.map_flags);
+				 map->name, map->def.map_flags);
 		} else if (strcmp(name, "key_size") == 0) {
 			__u32 sz;
 
-			if (!get_map_field_int(map_name, obj->btf, m, &sz))
+			if (!get_map_field_int(map->name, obj->btf, m, &sz))
 				return -EINVAL;
 			pr_debug("map '%s': found key_size = %u.\n",
-				 map_name, sz);
+				 map->name, sz);
 			if (map->def.key_size && map->def.key_size != sz) {
 				pr_warn("map '%s': conflicting key size %u != %u.\n",
-					map_name, map->def.key_size, sz);
+					map->name, map->def.key_size, sz);
 				return -EINVAL;
 			}
 			map->def.key_size = sz;
@@ -2026,25 +1976,25 @@ static int bpf_object__init_user_btf_map(struct bpf_object *obj,
 			t = btf__type_by_id(obj->btf, m->type);
 			if (!t) {
 				pr_warn("map '%s': key type [%d] not found.\n",
-					map_name, m->type);
+					map->name, m->type);
 				return -EINVAL;
 			}
 			if (!btf_is_ptr(t)) {
 				pr_warn("map '%s': key spec is not PTR: %u.\n",
-					map_name, btf_kind(t));
+					map->name, btf_kind(t));
 				return -EINVAL;
 			}
 			sz = btf__resolve_size(obj->btf, t->type);
 			if (sz < 0) {
 				pr_warn("map '%s': can't determine key size for type [%u]: %zd.\n",
-					map_name, t->type, (ssize_t)sz);
+					map->name, t->type, (ssize_t)sz);
 				return sz;
 			}
 			pr_debug("map '%s': found key [%u], sz = %zd.\n",
-				 map_name, t->type, (ssize_t)sz);
+				 map->name, t->type, (ssize_t)sz);
 			if (map->def.key_size && map->def.key_size != sz) {
 				pr_warn("map '%s': conflicting key size %u != %zd.\n",
-					map_name, map->def.key_size, (ssize_t)sz);
+					map->name, map->def.key_size, (ssize_t)sz);
 				return -EINVAL;
 			}
 			map->def.key_size = sz;
@@ -2052,13 +2002,13 @@ static int bpf_object__init_user_btf_map(struct bpf_object *obj,
 		} else if (strcmp(name, "value_size") == 0) {
 			__u32 sz;
 
-			if (!get_map_field_int(map_name, obj->btf, m, &sz))
+			if (!get_map_field_int(map->name, obj->btf, m, &sz))
 				return -EINVAL;
 			pr_debug("map '%s': found value_size = %u.\n",
-				 map_name, sz);
+				 map->name, sz);
 			if (map->def.value_size && map->def.value_size != sz) {
 				pr_warn("map '%s': conflicting value size %u != %u.\n",
-					map_name, map->def.value_size, sz);
+					map->name, map->def.value_size, sz);
 				return -EINVAL;
 			}
 			map->def.value_size = sz;
@@ -2068,71 +2018,207 @@ static int bpf_object__init_user_btf_map(struct bpf_object *obj,
 			t = btf__type_by_id(obj->btf, m->type);
 			if (!t) {
 				pr_warn("map '%s': value type [%d] not found.\n",
-					map_name, m->type);
+					map->name, m->type);
 				return -EINVAL;
 			}
 			if (!btf_is_ptr(t)) {
 				pr_warn("map '%s': value spec is not PTR: %u.\n",
-					map_name, btf_kind(t));
+					map->name, btf_kind(t));
 				return -EINVAL;
 			}
 			sz = btf__resolve_size(obj->btf, t->type);
 			if (sz < 0) {
 				pr_warn("map '%s': can't determine value size for type [%u]: %zd.\n",
-					map_name, t->type, (ssize_t)sz);
+					map->name, t->type, (ssize_t)sz);
 				return sz;
 			}
 			pr_debug("map '%s': found value [%u], sz = %zd.\n",
-				 map_name, t->type, (ssize_t)sz);
+				 map->name, t->type, (ssize_t)sz);
 			if (map->def.value_size && map->def.value_size != sz) {
 				pr_warn("map '%s': conflicting value size %u != %zd.\n",
-					map_name, map->def.value_size, (ssize_t)sz);
+					map->name, map->def.value_size, (ssize_t)sz);
 				return -EINVAL;
 			}
 			map->def.value_size = sz;
 			map->btf_value_type_id = t->type;
+		}
+		else if (strcmp(name, "values") == 0) {
+			int err;
+
+			if (is_inner) {
+				pr_warn("map '%s': multi-level inner maps not supported.\n",
+					map->name);
+				return -ENOTSUP;
+			}
+			if (i != vlen - 1) {
+				pr_warn("map '%s': '%s' member should be last.\n",
+					map->name, name);
+				return -EINVAL;
+			}
+			if (!bpf_map_type__is_map_in_map(map->def.type)) {
+				pr_warn("map '%s': should be map-in-map.\n",
+					map->name);
+				return -ENOTSUP;
+			}
+			if (map->def.value_size && map->def.value_size != 4) {
+				pr_warn("map '%s': conflicting value size %u != 4.\n",
+					map->name, map->def.value_size);
+				return -EINVAL;
+			}
+			map->def.value_size = 4;
+			t = btf__type_by_id(obj->btf, m->type);
+			if (!t) {
+				pr_warn("map '%s': map-in-map inner type [%d] not found.\n",
+					map->name, m->type);
+				return -EINVAL;
+			}
+			if (!btf_is_array(t) || btf_array(t)->nelems) {
+				pr_warn("map '%s': map-in-map inner spec is not a zero-sized array.\n",
+					map->name);
+				return -EINVAL;
+			}
+			t = skip_mods_and_typedefs(obj->btf, btf_array(t)->type,
+						   NULL);
+			if (!btf_is_ptr(t)) {
+				pr_warn("map '%s': map-in-map inner def is of unexpected kind %u.\n",
+					map->name, btf_kind(t));
+				return -EINVAL;
+			}
+			t = skip_mods_and_typedefs(obj->btf, t->type, NULL);
+			if (!btf_is_struct(t)) {
+				pr_warn("map '%s': map-in-map inner def is of unexpected kind %u.\n",
+					map->name, btf_kind(t));
+				return -EINVAL;
+			}
+
+			map->inner_map = calloc(1, sizeof(*map->inner_map));
+			if (!map->inner_map)
+				return -ENOMEM;
+			map->inner_map->sec_idx = obj->efile.btf_maps_shndx;
+			map->inner_map->name = malloc(strlen(map->name) +
+						      sizeof(".inner") + 1);
+			if (!map->inner_map->name)
+				return -ENOMEM;
+			sprintf(map->inner_map->name, "%s.inner", map->name);
+
+			err = parse_btf_map_def(obj, map->inner_map, t, strict,
+						true /* is_inner */, NULL);
+			if (err)
+				return err;
 		} else if (strcmp(name, "pinning") == 0) {
 			__u32 val;
 			int err;
 
-			if (!get_map_field_int(map_name, obj->btf, m, &val))
+			if (is_inner) {
+				pr_debug("map '%s': inner def can't be pinned.\n",
+					 map->name);
+				return -EINVAL;
+			}
+			if (!get_map_field_int(map->name, obj->btf, m, &val))
 				return -EINVAL;
 			pr_debug("map '%s': found pinning = %u.\n",
-				 map_name, val);
+				 map->name, val);
 
 			if (val != LIBBPF_PIN_NONE &&
 			    val != LIBBPF_PIN_BY_NAME) {
 				pr_warn("map '%s': invalid pinning value %u.\n",
-					map_name, val);
+					map->name, val);
 				return -EINVAL;
 			}
 			if (val == LIBBPF_PIN_BY_NAME) {
 				err = build_map_pin_path(map, pin_root_path);
 				if (err) {
 					pr_warn("map '%s': couldn't build pin path.\n",
-						map_name);
+						map->name);
 					return err;
 				}
 			}
 		} else {
 			if (strict) {
 				pr_warn("map '%s': unknown field '%s'.\n",
-					map_name, name);
+					map->name, name);
 				return -ENOTSUP;
 			}
 			pr_debug("map '%s': ignoring unknown field '%s'.\n",
-				 map_name, name);
+				 map->name, name);
 		}
 	}
 
 	if (map->def.type == BPF_MAP_TYPE_UNSPEC) {
-		pr_warn("map '%s': map type isn't specified.\n", map_name);
+		pr_warn("map '%s': map type isn't specified.\n", map->name);
 		return -EINVAL;
 	}
 
 	return 0;
 }
 
+static int bpf_object__init_user_btf_map(struct bpf_object *obj,
+					 const struct btf_type *sec,
+					 int var_idx, int sec_idx,
+					 const Elf_Data *data, bool strict,
+					 const char *pin_root_path)
+{
+	const struct btf_type *var, *def;
+	const struct btf_var_secinfo *vi;
+	const struct btf_var *var_extra;
+	const char *map_name;
+	struct bpf_map *map;
+
+	vi = btf_var_secinfos(sec) + var_idx;
+	var = btf__type_by_id(obj->btf, vi->type);
+	var_extra = btf_var(var);
+	map_name = btf__name_by_offset(obj->btf, var->name_off);
+
+	if (map_name == NULL || map_name[0] == '\0') {
+		pr_warn("map #%d: empty name.\n", var_idx);
+		return -EINVAL;
+	}
+	if ((__u64)vi->offset + vi->size > data->d_size) {
+		pr_warn("map '%s' BTF data is corrupted.\n", map_name);
+		return -EINVAL;
+	}
+	if (!btf_is_var(var)) {
+		pr_warn("map '%s': unexpected var kind %u.\n",
+			map_name, btf_kind(var));
+		return -EINVAL;
+	}
+	if (var_extra->linkage != BTF_VAR_GLOBAL_ALLOCATED &&
+	    var_extra->linkage != BTF_VAR_STATIC) {
+		pr_warn("map '%s': unsupported var linkage %u.\n",
+			map_name, var_extra->linkage);
+		return -EOPNOTSUPP;
+	}
+
+	def = skip_mods_and_typedefs(obj->btf, var->type, NULL);
+	if (!btf_is_struct(def)) {
+		pr_warn("map '%s': unexpected def kind %u.\n",
+			map_name, btf_kind(var));
+		return -EINVAL;
+	}
+	if (def->size > vi->size) {
+		pr_warn("map '%s': invalid def size.\n", map_name);
+		return -EINVAL;
+	}
+
+	map = bpf_object__add_map(obj);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+	map->name = strdup(map_name);
+	if (!map->name) {
+		pr_warn("map '%s': failed to alloc map name.\n", map_name);
+		return -ENOMEM;
+	}
+	map->libbpf_type = LIBBPF_MAP_UNSPEC;
+	map->def.type = BPF_MAP_TYPE_UNSPEC;
+	map->sec_idx = sec_idx;
+	map->sec_offset = vi->offset;
+	map->btf_var_idx = var_idx;
+	pr_debug("map '%s': at sec_idx %d, offset %zu.\n",
+		 map_name, map->sec_idx, map->sec_offset);
+
+	return parse_btf_map_def(obj, map, def, strict, false, pin_root_path);
+}
+
 static int bpf_object__init_user_btf_maps(struct bpf_object *obj, bool strict,
 					  const char *pin_root_path)
 {
@@ -2163,6 +2249,7 @@ static int bpf_object__init_user_btf_maps(struct bpf_object *obj, bool strict,
 		name = btf__name_by_offset(obj->btf, t->name_off);
 		if (strcmp(name, MAPS_ELF_SEC) == 0) {
 			sec = t;
+			obj->efile.btf_maps_sec_btf_id = i;
 			break;
 		}
 	}
@@ -2549,7 +2636,8 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 
 			/* Only do relo for section with exec instructions */
 			if (!section_have_execinstr(obj, sec) &&
-			    strcmp(name, ".rel" STRUCT_OPS_SEC)) {
+			    strcmp(name, ".rel" STRUCT_OPS_SEC) &&
+			    strcmp(name, ".rel" MAPS_ELF_SEC)) {
 				pr_debug("skip relo %s(%d) for section(%d)\n",
 					 name, idx, sec);
 				continue;
@@ -3482,124 +3570,181 @@ bpf_object__populate_internal_map(struct bpf_object *obj, struct bpf_map *map)
 	return 0;
 }
 
+static void bpf_map__destroy(struct bpf_map *map);
+
+static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map)
+{
+	struct bpf_create_map_attr create_attr;
+	struct bpf_map_def *def = &map->def;
+
+	memset(&create_attr, 0, sizeof(create_attr));
+
+	if (obj->caps.name)
+		create_attr.name = map->name;
+	create_attr.map_ifindex = map->map_ifindex;
+	create_attr.map_type = def->type;
+	create_attr.map_flags = def->map_flags;
+	create_attr.key_size = def->key_size;
+	create_attr.value_size = def->value_size;
+
+	if (def->type == BPF_MAP_TYPE_PERF_EVENT_ARRAY && !def->max_entries) {
+		int nr_cpus;
+
+		nr_cpus = libbpf_num_possible_cpus();
+		if (nr_cpus < 0) {
+			pr_warn("map '%s': failed to determine number of system CPUs: %d\n",
+				map->name, nr_cpus);
+			return nr_cpus;
+		}
+		pr_debug("map '%s': setting size to %d\n", map->name, nr_cpus);
+		create_attr.max_entries = nr_cpus;
+	} else {
+		create_attr.max_entries = def->max_entries;
+	}
+
+	if (bpf_map__is_struct_ops(map))
+		create_attr.btf_vmlinux_value_type_id =
+			map->btf_vmlinux_value_type_id;
+
+	create_attr.btf_fd = 0;
+	create_attr.btf_key_type_id = 0;
+	create_attr.btf_value_type_id = 0;
+	if (obj->btf && !bpf_map_find_btf_info(obj, map)) {
+		create_attr.btf_fd = btf__fd(obj->btf);
+		create_attr.btf_key_type_id = map->btf_key_type_id;
+		create_attr.btf_value_type_id = map->btf_value_type_id;
+	}
+
+	if (bpf_map_type__is_map_in_map(def->type)) {
+		if (map->inner_map) {
+			int err;
+
+			err = bpf_object__create_map(obj, map->inner_map);
+			if (err) {
+				pr_warn("map '%s': failed to create inner map: %d\n",
+					map->name, err);
+				return err;
+			}
+			map->inner_map_fd = bpf_map__fd(map->inner_map);
+		}
+		if (map->inner_map_fd >= 0)
+			create_attr.inner_map_fd = map->inner_map_fd;
+	}
+
+	map->fd = bpf_create_map_xattr(&create_attr);
+	if (map->fd < 0 && (create_attr.btf_key_type_id ||
+			    create_attr.btf_value_type_id)) {
+		char *cp, errmsg[STRERR_BUFSIZE];
+		int err = -errno;
+
+		cp = libbpf_strerror_r(err, errmsg, sizeof(errmsg));
+		pr_warn("Error in bpf_create_map_xattr(%s):%s(%d). Retrying without BTF.\n",
+			map->name, cp, err);
+		create_attr.btf_fd = 0;
+		create_attr.btf_key_type_id = 0;
+		create_attr.btf_value_type_id = 0;
+		map->btf_key_type_id = 0;
+		map->btf_value_type_id = 0;
+		map->fd = bpf_create_map_xattr(&create_attr);
+	}
+
+	if (map->fd < 0)
+		return -errno;
+
+	if (bpf_map_type__is_map_in_map(def->type) && map->inner_map) {
+		bpf_map__destroy(map->inner_map);
+		zfree(&map->inner_map);
+	}
+
+	return 0;
+}
+
 static int
 bpf_object__create_maps(struct bpf_object *obj)
 {
-	struct bpf_create_map_attr create_attr = {};
-	int nr_cpus = 0;
-	unsigned int i;
+	struct bpf_map *map;
+	char *cp, errmsg[STRERR_BUFSIZE];
+	unsigned int i, j;
 	int err;
 
 	for (i = 0; i < obj->nr_maps; i++) {
-		struct bpf_map *map = &obj->maps[i];
-		struct bpf_map_def *def = &map->def;
-		char *cp, errmsg[STRERR_BUFSIZE];
-		int *pfd = &map->fd;
+		map = &obj->maps[i];
 
 		if (map->pin_path) {
 			err = bpf_object__reuse_map(map);
 			if (err) {
-				pr_warn("error reusing pinned map %s\n",
+				pr_warn("map '%s': error reusing pinned map\n",
 					map->name);
-				return err;
+				goto err_out;
 			}
 		}
 
 		if (map->fd >= 0) {
-			pr_debug("skip map create (preset) %s: fd=%d\n",
+			pr_debug("map '%s': skipping creation (preset fd=%d)\n",
 				 map->name, map->fd);
 			continue;
 		}
 
-		if (obj->caps.name)
-			create_attr.name = map->name;
-		create_attr.map_ifindex = map->map_ifindex;
-		create_attr.map_type = def->type;
-		create_attr.map_flags = def->map_flags;
-		create_attr.key_size = def->key_size;
-		create_attr.value_size = def->value_size;
-		if (def->type == BPF_MAP_TYPE_PERF_EVENT_ARRAY &&
-		    !def->max_entries) {
-			if (!nr_cpus)
-				nr_cpus = libbpf_num_possible_cpus();
-			if (nr_cpus < 0) {
-				pr_warn("failed to determine number of system CPUs: %d\n",
-					nr_cpus);
-				err = nr_cpus;
-				goto err_out;
-			}
-			pr_debug("map '%s': setting size to %d\n",
-				 map->name, nr_cpus);
-			create_attr.max_entries = nr_cpus;
-		} else {
-			create_attr.max_entries = def->max_entries;
-		}
-		create_attr.btf_fd = 0;
-		create_attr.btf_key_type_id = 0;
-		create_attr.btf_value_type_id = 0;
-		if (bpf_map_type__is_map_in_map(def->type) &&
-		    map->inner_map_fd >= 0)
-			create_attr.inner_map_fd = map->inner_map_fd;
-		if (bpf_map__is_struct_ops(map))
-			create_attr.btf_vmlinux_value_type_id =
-				map->btf_vmlinux_value_type_id;
-
-		if (obj->btf && !bpf_map_find_btf_info(obj, map)) {
-			create_attr.btf_fd = btf__fd(obj->btf);
-			create_attr.btf_key_type_id = map->btf_key_type_id;
-			create_attr.btf_value_type_id = map->btf_value_type_id;
-		}
-
-		*pfd = bpf_create_map_xattr(&create_attr);
-		if (*pfd < 0 && (create_attr.btf_key_type_id ||
-				 create_attr.btf_value_type_id)) {
-			err = -errno;
-			cp = libbpf_strerror_r(err, errmsg, sizeof(errmsg));
-			pr_warn("Error in bpf_create_map_xattr(%s):%s(%d). Retrying without BTF.\n",
-				map->name, cp, err);
-			create_attr.btf_fd = 0;
-			create_attr.btf_key_type_id = 0;
-			create_attr.btf_value_type_id = 0;
-			map->btf_key_type_id = 0;
-			map->btf_value_type_id = 0;
-			*pfd = bpf_create_map_xattr(&create_attr);
-		}
+		err = bpf_object__create_map(obj, map);
+		if (err)
+			goto err_out;
 
-		if (*pfd < 0) {
-			size_t j;
-
-			err = -errno;
-err_out:
-			cp = libbpf_strerror_r(err, errmsg, sizeof(errmsg));
-			pr_warn("failed to create map (name: '%s'): %s(%d)\n",
-				map->name, cp, err);
-			pr_perm_msg(err);
-			for (j = 0; j < i; j++)
-				zclose(obj->maps[j].fd);
-			return err;
-		}
+		pr_debug("map '%s': created successfully, fd=%d\n", map->name,
+			 map->fd);
 
 		if (bpf_map__is_internal(map)) {
 			err = bpf_object__populate_internal_map(obj, map);
 			if (err < 0) {
-				zclose(*pfd);
+				zclose(map->fd);
 				goto err_out;
 			}
 		}
 
+		if (map->init_slots_sz) {
+			for (j = 0; j < map->init_slots_sz; j++) {
+				const struct bpf_map *targ_map;
+				int fd;
+
+				if (!map->init_slots[j])
+					continue;
+
+				targ_map = map->init_slots[j];
+				fd = bpf_map__fd(targ_map);
+				err = bpf_map_update_elem(map->fd, &j, &fd, 0);
+				if (err) {
+					err = -errno;
+					pr_warn("map '%s': failed to initialize slot [%d] to map '%s' fd=%d: %d\n",
+						map->name, j, targ_map->name,
+						fd, err);
+					goto err_out;
+				}
+				pr_debug("map '%s': slot [%d] set to map '%s' fd=%d\n",
+					 map->name, j, targ_map->name, fd);
+			}
+			zfree(&map->init_slots);
+			map->init_slots_sz = 0;
+		}
+
 		if (map->pin_path && !map->pinned) {
 			err = bpf_map__pin(map, NULL);
 			if (err) {
-				pr_warn("failed to auto-pin map name '%s' at '%s'\n",
-					map->name, map->pin_path);
-				return err;
+				pr_warn("map '%s': failed to auto-pin at '%s': %d\n",
+					map->name, map->pin_path, err);
+				zclose(map->fd);
+				goto err_out;
 			}
 		}
-
-		pr_debug("created map %s: fd=%d\n", map->name, *pfd);
 	}
 
 	return 0;
+
+err_out:
+	cp = libbpf_strerror_r(err, errmsg, sizeof(errmsg));
+	pr_warn("map '%s': failed to create: %s(%d)\n", map->name, cp, err);
+	pr_perm_msg(err);
+	for (j = 0; j < i; j++)
+		zclose(obj->maps[j].fd);
+	return err;
 }
 
 static int
@@ -4851,9 +4996,118 @@ bpf_object__relocate(struct bpf_object *obj, const char *targ_btf_path)
 	return 0;
 }
 
-static int bpf_object__collect_struct_ops_map_reloc(struct bpf_object *obj,
-						    GElf_Shdr *shdr,
-						    Elf_Data *data);
+static int bpf_object__collect_st_ops_relos(struct bpf_object *obj,
+					    GElf_Shdr *shdr, Elf_Data *data);
+
+static int bpf_object__collect_map_relos(struct bpf_object *obj,
+					 GElf_Shdr *shdr, Elf_Data *data)
+{
+	int i, j, nrels, new_sz, ptr_sz = sizeof(void *);
+	const struct btf_type *sec, *var, *def;
+	const struct btf_var_secinfo *vi;
+	const struct btf_member *member;
+	struct bpf_map *map, *targ_map;
+	const char *name, *mname;
+	Elf_Data *symbols;
+	unsigned int moff;
+	GElf_Sym sym;
+	GElf_Rel rel;
+	void *tmp;
+
+	if (!obj->efile.btf_maps_sec_btf_id || !obj->btf)
+		return -EINVAL;
+	sec = btf__type_by_id(obj->btf, obj->efile.btf_maps_sec_btf_id);
+	if (!sec)
+		return -EINVAL;
+
+	symbols = obj->efile.symbols;
+	nrels = shdr->sh_size / shdr->sh_entsize;
+	for (i = 0; i < nrels; i++) {
+		if (!gelf_getrel(data, i, &rel)) {
+			pr_warn(".maps relo #%d: failed to get ELF relo\n", i);
+			return -LIBBPF_ERRNO__FORMAT;
+		}
+		if (!gelf_getsym(symbols, GELF_R_SYM(rel.r_info), &sym)) {
+			pr_warn(".maps relo #%d: symbol %zx not found\n",
+				i, (size_t)GELF_R_SYM(rel.r_info));
+			return -LIBBPF_ERRNO__FORMAT;
+		}
+		name = elf_strptr(obj->efile.elf, obj->efile.strtabidx,
+				  sym.st_name) ? : "<?>";
+		if (sym.st_shndx != obj->efile.btf_maps_shndx) {
+			pr_warn(".maps relo #%d: '%s' isn't a BTF-defined map\n",
+				i, name);
+			return -LIBBPF_ERRNO__RELOC;
+		}
+
+		pr_debug(".maps relo #%d: for %zd value %zd rel.r_offset %zu name %d ('%s')\n",
+			 i, (ssize_t)(rel.r_info >> 32), (size_t)sym.st_value,
+			 (size_t)rel.r_offset, sym.st_name, name);
+
+		for (j = 0; j < obj->nr_maps; j++) {
+			map = &obj->maps[j];
+			if (map->sec_idx != obj->efile.btf_maps_shndx)
+				continue;
+
+			vi = btf_var_secinfos(sec) + map->btf_var_idx;
+			if (vi->offset <= rel.r_offset &&
+			    rel.r_offset + sizeof(void *) <= vi->offset + vi->size)
+				break;
+		}
+		if (j == obj->nr_maps) {
+			pr_warn(".maps relo #%d: cannot find map '%s' at rel.r_offset %zu\n",
+				i, name, (size_t)rel.r_offset);
+			return -EINVAL;
+		}
+
+		if (!bpf_map_type__is_map_in_map(map->def.type))
+			return -EINVAL;
+		if (map->def.type == BPF_MAP_TYPE_HASH_OF_MAPS &&
+		    map->def.key_size != sizeof(int)) {
+			pr_warn(".maps relo #%d: hash-of-maps '%s' should have key size %zu.\n",
+				i, map->name, sizeof(int));
+			return -EINVAL;
+		}
+
+		targ_map = bpf_object__find_map_by_name(obj, name);
+		if (!targ_map)
+			return -ESRCH;
+
+		var = btf__type_by_id(obj->btf, vi->type);
+		def = skip_mods_and_typedefs(obj->btf, var->type, NULL);
+		if (btf_vlen(def) == 0)
+			return -EINVAL;
+		member = btf_members(def) + btf_vlen(def) - 1;
+		mname = btf__name_by_offset(obj->btf, member->name_off);
+		if (strcmp(mname, "values"))
+			return -EINVAL;
+
+		moff = btf_member_bit_offset(def, btf_vlen(def) - 1) / 8;
+		if (rel.r_offset - vi->offset < moff)
+			return -EINVAL;
+
+		moff = rel.r_offset - vi->offset - moff;
+		if (moff % ptr_sz)
+			return -EINVAL;
+		moff /= ptr_sz;
+		if (moff >= map->init_slots_sz) {
+			new_sz = moff + 1;
+			tmp = realloc(map->init_slots, new_sz * ptr_sz);
+			if (!tmp)
+				return -ENOMEM;
+			map->init_slots = tmp;
+			memset(map->init_slots + map->init_slots_sz, 0,
+			       (new_sz - map->init_slots_sz) * ptr_sz);
+			map->init_slots_sz = new_sz;
+		}
+		map->init_slots[moff] = targ_map;
+
+		pr_debug(".maps relo #%d: map '%s' slot [%d] points to map '%s'\n",
+			 i, map->name, moff, name);
+	}
+
+	return 0;
+}
 
 static int bpf_object__collect_reloc(struct bpf_object *obj)
 {
@@ -4876,21 +5130,17 @@ static int bpf_object__collect_reloc(struct bpf_object *obj)
 		}
 
 		if (idx == obj->efile.st_ops_shndx) {
-			err = bpf_object__collect_struct_ops_map_reloc(obj,
-								       shdr,
-								       data);
-			if (err)
-				return err;
-			continue;
-		}
-
-		prog = bpf_object__find_prog_by_idx(obj, idx);
-		if (!prog) {
-			pr_warn("relocation failed: no section(%d)\n", idx);
-			return -LIBBPF_ERRNO__RELOC;
+			err = bpf_object__collect_st_ops_relos(obj, shdr, data);
+		} else if (idx == obj->efile.btf_maps_shndx) {
+			err = bpf_object__collect_map_relos(obj, shdr, data);
+		} else {
+			prog = bpf_object__find_prog_by_idx(obj, idx);
+			if (!prog) {
+				pr_warn("relocation failed: no prog in section(%d)\n", idx);
+				return -LIBBPF_ERRNO__RELOC;
+			}
+			err = bpf_program__collect_reloc(prog, shdr, data, obj);
 		}
-
-		err = bpf_program__collect_reloc(prog, shdr, data, obj);
 		if (err)
 			return err;
 	}
@@ -5955,6 +6205,40 @@ int bpf_object__pin(struct bpf_object *obj, const char *path)
 	return 0;
 }
 
+static void bpf_map__destroy(struct bpf_map *map)
+{
+	if (map->clear_priv)
+		map->clear_priv(map, map->priv);
+	map->priv = NULL;
+	map->clear_priv = NULL;
+
+	if (map->inner_map) {
+		bpf_map__destroy(map->inner_map);
+		zfree(&map->inner_map);
+	}
+
+	zfree(&map->init_slots);
+	map->init_slots_sz = 0;
+
+	if (map->mmaped) {
+		munmap(map->mmaped, bpf_map_mmap_sz(map));
+		map->mmaped = NULL;
+	}
+
+	if (map->st_ops) {
+		zfree(&map->st_ops->data);
+		zfree(&map->st_ops->progs);
+		zfree(&map->st_ops->kern_func_off);
+		zfree(&map->st_ops);
+	}
+
+	zfree(&map->name);
+	zfree(&map->pin_path);
+
+	if (map->fd >= 0)
+		zclose(map->fd);
+}
+
 void bpf_object__close(struct bpf_object *obj)
 {
 	size_t i;
@@ -5970,29 +6254,8 @@ void bpf_object__close(struct bpf_object *obj)
 	btf__free(obj->btf);
 	btf_ext__free(obj->btf_ext);
 
-	for (i = 0; i < obj->nr_maps; i++) {
-		struct bpf_map *map = &obj->maps[i];
-
-		if (map->clear_priv)
-			map->clear_priv(map, map->priv);
-		map->priv = NULL;
-		map->clear_priv = NULL;
-
-		if (map->mmaped) {
-			munmap(map->mmaped, bpf_map_mmap_sz(map));
-			map->mmaped = NULL;
-		}
-
-		if (map->st_ops) {
-			zfree(&map->st_ops->data);
-			zfree(&map->st_ops->progs);
-			zfree(&map->st_ops->kern_func_off);
-			zfree(&map->st_ops);
-		}
-
-		zfree(&map->name);
-		zfree(&map->pin_path);
-	}
+	for (i = 0; i < obj->nr_maps; i++)
+		bpf_map__destroy(&obj->maps[i]);
 
 	zfree(&obj->kconfig);
 	zfree(&obj->externs);
@@ -6516,9 +6779,8 @@ static struct bpf_map *find_struct_ops_map_by_offset(struct bpf_object *obj,
 }
 
 /* Collect the reloc from ELF and populate the st_ops->progs[] */
-static int bpf_object__collect_struct_ops_map_reloc(struct bpf_object *obj,
-						    GElf_Shdr *shdr,
-						    Elf_Data *data)
+static int bpf_object__collect_st_ops_relos(struct bpf_object *obj,
+					    GElf_Shdr *shdr, Elf_Data *data)
 {
 	const struct btf_member *member;
 	struct bpf_struct_ops *st_ops;
@@ -6672,6 +6934,7 @@ int libbpf_find_vmlinux_btf_id(const char *name,
 			       enum bpf_attach_type attach_type)
 {
 	struct btf *btf;
+	int err;
 
 	btf = libbpf_find_kernel_btf();
 	if (IS_ERR(btf)) {
@@ -6679,7 +6942,9 @@ int libbpf_find_vmlinux_btf_id(const char *name,
 		return -EINVAL;
 	}
 
-	return __find_vmlinux_btf_id(btf, name, attach_type);
+	err = __find_vmlinux_btf_id(btf, name, attach_type);
+	btf__free(btf);
+	return err;
 }
 
 static int libbpf_find_prog_btf_id(const char *name, __u32 attach_prog_fd)
@@ -7006,7 +7271,7 @@ int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
 	err = bpf_object__load(obj);
 	if (err) {
 		bpf_object__close(obj);
-		return -EINVAL;
+		return err;
 	}
 
 	*pobj = obj;
@@ -8035,7 +8300,7 @@ static struct perf_buffer *__perf_buffer__new(int map_fd, size_t page_cnt,
 struct perf_sample_raw {
 	struct perf_event_header header;
 	uint32_t size;
-	char data[0];
+	char data[];
 };
 
 struct perf_sample_lost {
diff --git a/tools/lib/bpf/libbpf.map b/tools/lib/bpf/libbpf.map
index bb8831605b25..7cd49aa38005 100644
--- a/tools/lib/bpf/libbpf.map
+++ b/tools/lib/bpf/libbpf.map
@@ -254,3 +254,9 @@ LIBBPF_0.0.8 {
 		bpf_program__set_lsm;
 		bpf_set_link_xdp_fd_opts;
 } LIBBPF_0.0.7;
+
+LIBBPF_0.0.9 {
+	global:
+		bpf_link_get_fd_by_id;
+		bpf_link_get_next_id;
+} LIBBPF_0.0.8;
diff --git a/tools/lib/bpf/libbpf_internal.h b/tools/lib/bpf/libbpf_internal.h
index 8c3afbd97747..50d70e90d5f1 100644
--- a/tools/lib/bpf/libbpf_internal.h
+++ b/tools/lib/bpf/libbpf_internal.h
@@ -153,7 +153,7 @@ struct btf_ext_info_sec {
 	__u32	sec_name_off;
 	__u32	num_info;
 	/* Followed by num_info * record_size number of bytes */
-	__u8	data[0];
+	__u8	data[];
 };
 
 /* The minimum bpf_func_info checked by the loader */
diff --git a/tools/lib/traceevent/parse-filter.c b/tools/lib/traceevent/parse-filter.c
index 20eed719542e..c271aeeb227d 100644
--- a/tools/lib/traceevent/parse-filter.c
+++ b/tools/lib/traceevent/parse-filter.c
@@ -1958,7 +1958,8 @@ static char *op_to_str(struct tep_event_filter *filter, struct tep_filter_arg *a
 				default:
 					break;
 				}
-				asprintf(&str, val ? "TRUE" : "FALSE");
+				if (asprintf(&str, val ? "TRUE" : "FALSE") < 0)
+					str = NULL;
 				break;
 			}
 		}
@@ -1976,7 +1977,8 @@ static char *op_to_str(struct tep_event_filter *filter, struct tep_filter_arg *a
 			break;
 		}
 
-		asprintf(&str, "(%s) %s (%s)", left, op, right);
+		if (asprintf(&str, "(%s) %s (%s)", left, op, right) < 0)
+			str = NULL;
 		break;
 
 	case TEP_FILTER_OP_NOT:
@@ -1992,10 +1994,12 @@ static char *op_to_str(struct tep_event_filter *filter, struct tep_filter_arg *a
 			right_val = 0;
 		if (right_val >= 0) {
 			/* just return the opposite */
-			asprintf(&str, right_val ? "FALSE" : "TRUE");
+			if (asprintf(&str, right_val ? "FALSE" : "TRUE") < 0)
+				str = NULL;
 			break;
 		}
-		asprintf(&str, "%s(%s)", op, right);
+		if (asprintf(&str, "%s(%s)", op, right) < 0)
+			str = NULL;
 		break;
 
 	default:
@@ -2011,7 +2015,8 @@ static char *val_to_str(struct tep_event_filter *filter, struct tep_filter_arg *
 {
 	char *str = NULL;
 
-	asprintf(&str, "%lld", arg->value.val);
+	if (asprintf(&str, "%lld", arg->value.val) < 0)
+		str = NULL;
 
 	return str;
 }
@@ -2069,7 +2074,8 @@ static char *exp_to_str(struct tep_event_filter *filter, struct tep_filter_arg *
 		break;
 	}
 
-	asprintf(&str, "%s %s %s", lstr, op, rstr);
+	if (asprintf(&str, "%s %s %s", lstr, op, rstr) < 0)
+		str = NULL;
 out:
 	free(lstr);
 	free(rstr);
@@ -2113,7 +2119,8 @@ static char *num_to_str(struct tep_event_filter *filter, struct tep_filter_arg *
 		if (!op)
 			op = "<=";
 
-		asprintf(&str, "%s %s %s", lstr, op, rstr);
+		if (asprintf(&str, "%s %s %s", lstr, op, rstr) < 0)
+			str = NULL;
 		break;
 
 	default:
@@ -2148,8 +2155,9 @@ static char *str_to_str(struct tep_event_filter *filter, struct tep_filter_arg *
 		if (!op)
 			op = "!~";
 
-		asprintf(&str, "%s %s \"%s\"",
-			 arg->str.field->name, op, arg->str.val);
+		if (asprintf(&str, "%s %s \"%s\"",
+			 arg->str.field->name, op, arg->str.val) < 0)
+			str = NULL;
 		break;
 
 	default:
@@ -2165,7 +2173,8 @@ static char *arg_to_str(struct tep_event_filter *filter, struct tep_filter_arg *
 
 	switch (arg->type) {
 	case TEP_FILTER_ARG_BOOLEAN:
-		asprintf(&str, arg->boolean.value ? "TRUE" : "FALSE");
+		if (asprintf(&str, arg->boolean.value ? "TRUE" : "FALSE") < 0)
+			str = NULL;
 		return str;
 
 	case TEP_FILTER_ARG_OP:
diff --git a/tools/memory-model/Documentation/explanation.txt b/tools/memory-model/Documentation/explanation.txt
index e91a2eb19592..993f800659c6 100644
--- a/tools/memory-model/Documentation/explanation.txt
+++ b/tools/memory-model/Documentation/explanation.txt
@@ -1987,28 +1987,36 @@ outcome undefined.
 
 In technical terms, the compiler is allowed to assume that when the
 program executes, there will not be any data races.  A "data race"
-occurs when two conflicting memory accesses execute concurrently;
-two memory accesses "conflict" if:
+occurs when there are two memory accesses such that:
 
-	they access the same location,
+1.	they access the same location,
 
-	they occur on different CPUs (or in different threads on the
-	same CPU),
+2.	at least one of them is a store,
 
-	at least one of them is a plain access,
+3.	at least one of them is plain,
 
-	and at least one of them is a store.
+4.	they occur on different CPUs (or in different threads on the
+	same CPU), and
 
-The LKMM tries to determine whether a program contains two conflicting
-accesses which may execute concurrently; if it does then the LKMM says
-there is a potential data race and makes no predictions about the
-program's outcome.
+5.	they execute concurrently.
 
-Determining whether two accesses conflict is easy; you can see that
-all the concepts involved in the definition above are already part of
-the memory model.  The hard part is telling whether they may execute
-concurrently.  The LKMM takes a conservative attitude, assuming that
-accesses may be concurrent unless it can prove they cannot.
+In the literature, two accesses are said to "conflict" if they satisfy
+1 and 2 above.  We'll go a little farther and say that two accesses
+are "race candidates" if they satisfy 1 - 4.  Thus, whether or not two
+race candidates actually do race in a given execution depends on
+whether they are concurrent.
+
+The LKMM tries to determine whether a program contains race candidates
+which may execute concurrently; if it does then the LKMM says there is
+a potential data race and makes no predictions about the program's
+outcome.
+
+Determining whether two accesses are race candidates is easy; you can
+see that all the concepts involved in the definition above are already
+part of the memory model.  The hard part is telling whether they may
+execute concurrently.  The LKMM takes a conservative attitude,
+assuming that accesses may be concurrent unless it can prove they
+are not.
 
 If two memory accesses aren't concurrent then one must execute before
 the other.  Therefore the LKMM decides two accesses aren't concurrent
@@ -2171,8 +2179,8 @@ again, now using plain accesses for buf:
 	}
 
 This program does not contain a data race.  Although the U and V
-accesses conflict, the LKMM can prove they are not concurrent as
-follows:
+accesses are race candidates, the LKMM can prove they are not
+concurrent as follows:
 
 	The smp_wmb() fence in P0 is both a compiler barrier and a
 	cumul-fence.  It guarantees that no matter what hash of
@@ -2326,12 +2334,11 @@ could now perform the load of x before the load of ptr (there might be
 a control dependency but no address dependency at the machine level).
 
 Finally, it turns out there is a situation in which a plain write does
-not need to be w-post-bounded: when it is separated from the
-conflicting access by a fence.  At first glance this may seem
-impossible.  After all, to be conflicting the second access has to be
-on a different CPU from the first, and fences don't link events on
-different CPUs.  Well, normal fences don't -- but rcu-fence can!
-Here's an example:
+not need to be w-post-bounded: when it is separated from the other
+race-candidate access by a fence.  At first glance this may seem
+impossible.  After all, to be race candidates the two accesses must
+be on different CPUs, and fences don't link events on different CPUs.
+Well, normal fences don't -- but rcu-fence can!  Here's an example:
 
 	int x, y;
 
@@ -2367,7 +2374,7 @@ concurrent and there is no race, even though P1's plain store to y
 isn't w-post-bounded by any marked accesses.
 
 Putting all this material together yields the following picture.  For
-two conflicting stores W and W', where W ->co W', the LKMM says the
+race-candidate stores W and W', where W ->co W', the LKMM says the
 stores don't race if W can be linked to W' by a
 
 	w-post-bounded ; vis ; w-pre-bounded
@@ -2380,8 +2387,8 @@ sequence, and if W' is plain then they also have to be linked by a
 
 	w-post-bounded ; vis ; r-pre-bounded
 
-sequence.  For a conflicting load R and store W, the LKMM says the two
-accesses don't race if R can be linked to W by an
+sequence.  For race-candidate load R and store W, the LKMM says the
+two accesses don't race if R can be linked to W by an
 
 	r-post-bounded ; xb* ; w-pre-bounded
 
@@ -2413,20 +2420,20 @@ is, the rules governing the memory subsystem's choice of a store to
 satisfy a load request and its determination of where a store will
 fall in the coherence order):
 
-	If R and W conflict and it is possible to link R to W by one
-	of the xb* sequences listed above, then W ->rfe R is not
-	allowed (i.e., a load cannot read from a store that it
+	If R and W are race candidates and it is possible to link R to
+	W by one of the xb* sequences listed above, then W ->rfe R is
+	not allowed (i.e., a load cannot read from a store that it
 	executes before, even if one or both is plain).
 
-	If W and R conflict and it is possible to link W to R by one
-	of the vis sequences listed above, then R ->fre W is not
-	allowed (i.e., if a store is visible to a load then the load
-	must read from that store or one coherence-after it).
+	If W and R are race candidates and it is possible to link W to
+	R by one of the vis sequences listed above, then R ->fre W is
+	not allowed (i.e., if a store is visible to a load then the
+	load must read from that store or one coherence-after it).
 
-	If W and W' conflict and it is possible to link W to W' by one
-	of the vis sequences listed above, then W' ->co W is not
-	allowed (i.e., if one store is visible to a second then the
-	second must come after the first in the coherence order).
+	If W and W' are race candidates and it is possible to link W
+	to W' by one of the vis sequences listed above, then W' ->co W
+	is not allowed (i.e., if one store is visible to a second then
+	the second must come after the first in the coherence order).
 
 This is the extent to which the LKMM deals with plain accesses.
 Perhaps it could say more (for example, plain accesses might
diff --git a/tools/memory-model/Documentation/references.txt b/tools/memory-model/Documentation/references.txt
index b177f3e4a614..ecbbaa5396d4 100644
--- a/tools/memory-model/Documentation/references.txt
+++ b/tools/memory-model/Documentation/references.txt
@@ -73,6 +73,18 @@ o	Christopher Pulte, Shaked Flur, Will Deacon, Jon French,
 Linux-kernel memory model
 =========================
 
+o	Jade Alglave, Will Deacon, Boqun Feng, David Howells, Daniel
+	Lustig, Luc Maranget, Paul E. McKenney, Andrea Parri, Nicholas
+	Piggin, Alan Stern, Akira Yokosawa, and Peter Zijlstra.
+	2019. "Calibrating your fear of big bad optimizing compilers"
+	Linux Weekly News.  https://lwn.net/Articles/799218/
+
+o	Jade Alglave, Will Deacon, Boqun Feng, David Howells, Daniel
+	Lustig, Luc Maranget, Paul E. McKenney, Andrea Parri, Nicholas
+	Piggin, Alan Stern, Akira Yokosawa, and Peter Zijlstra.
+	2019. "Who's afraid of a big bad optimizing compiler?"
+	Linux Weekly News.  https://lwn.net/Articles/793253/
+
 o	Jade Alglave, Luc Maranget, Paul E. McKenney, Andrea Parri, and
 	Alan Stern.  2018. "Frightening small children and disconcerting
 	grown-ups: Concurrency in the Linux kernel". In Proceedings of
@@ -88,6 +100,11 @@ o	Jade Alglave, Luc Maranget, Paul E. McKenney, Andrea Parri, and
 	Alan Stern.  2017.  "A formal kernel memory-ordering model (part 2)"
 	Linux Weekly News.  https://lwn.net/Articles/720550/
 
+o	Jade Alglave, Luc Maranget, Paul E. McKenney, Andrea Parri, and
+	Alan Stern.  2017-2019.  "A Formal Model of Linux-Kernel Memory
+	Ordering" (backup material for the LWN articles)
+	https://mirrors.edge.kernel.org/pub/linux/kernel/people/paulmck/LWNLinuxMM/
+
 
 Memory-model tooling
 ====================
@@ -110,5 +127,5 @@ Memory-model comparisons
 ========================
 
 o	Paul E. McKenney, Ulrich Weigand, Andrea Parri, and Boqun
-	Feng. 2016. "Linux-Kernel Memory Model". (6 June 2016).
-	http://open-std.org/JTC1/SC22/WG21/docs/papers/2016/p0124r2.html.
+	Feng. 2018. "Linux-Kernel Memory Model". (27 September 2018).
+	http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0124r6.html.
diff --git a/tools/memory-model/README b/tools/memory-model/README
index fc07b52f2028..b9c562e92981 100644
--- a/tools/memory-model/README
+++ b/tools/memory-model/README
@@ -207,11 +207,15 @@ The Linux-kernel memory model (LKMM) has the following limitations:
 		case as a store release.
 
 	b.	The "unless" RMW operations are not currently modeled:
-		atomic_long_add_unless(), atomic_add_unless(),
-		atomic_inc_unless_negative(), and
-		atomic_dec_unless_positive().  These can be emulated
+		atomic_long_add_unless(), atomic_inc_unless_negative(),
+		and atomic_dec_unless_positive().  These can be emulated
 		in litmus tests, for example, by using atomic_cmpxchg().
 
+		One exception of this limitation is atomic_add_unless(),
+		which is provided directly by herd7 (so no corresponding
+		definition in linux-kernel.def).  atomic_add_unless() is
+		modeled by herd7 therefore it can be used in litmus tests.
+
 	c.	The call_rcu() function is not modeled.  It can be
 		emulated in litmus tests by adding another process that
 		invokes synchronize_rcu() and the body of the callback
diff --git a/tools/memory-model/litmus-tests/.gitignore b/tools/memory-model/litmus-tests/.gitignore
index c492a1ddad91..19c379cf069d 100644
--- a/tools/memory-model/litmus-tests/.gitignore
+++ b/tools/memory-model/litmus-tests/.gitignore
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-*.litmus.out
+*.litmus.*
diff --git a/tools/memory-model/litmus-tests/MP+onceassign+derefonce.litmus b/tools/memory-model/litmus-tests/MP+onceassign+derefonce.litmus
deleted file mode 100644
index 97731b4bbdd8..000000000000
--- a/tools/memory-model/litmus-tests/MP+onceassign+derefonce.litmus
+++ /dev/null
@@ -1,34 +0,0 @@
-C MP+onceassign+derefonce
-
-(*
- * Result: Never
- *
- * This litmus test demonstrates that rcu_assign_pointer() and
- * rcu_dereference() suffice to ensure that an RCU reader will not see
- * pre-initialization garbage when it traverses an RCU-protected data
- * structure containing a newly inserted element.
- *)
-
-{
-y=z;
-z=0;
-}
-
-P0(int *x, int **y)
-{
-	WRITE_ONCE(*x, 1);
-	rcu_assign_pointer(*y, x);
-}
-
-P1(int *x, int **y)
-{
-	int *r0;
-	int r1;
-
-	rcu_read_lock();
-	r0 = rcu_dereference(*y);
-	r1 = READ_ONCE(*r0);
-	rcu_read_unlock();
-}
-
-exists (1:r0=x /\ 1:r1=0)
diff --git a/tools/memory-model/litmus-tests/README b/tools/memory-model/litmus-tests/README
index 681f9067fa9e..79e1b1ed4929 100644
--- a/tools/memory-model/litmus-tests/README
+++ b/tools/memory-model/litmus-tests/README
@@ -63,9 +63,6 @@ LB+poonceonces.litmus
 	As above, but with store-release replaced with WRITE_ONCE()
 	and load-acquire replaced with READ_ONCE().
 
-MP+onceassign+derefonce.litmus
-	As below, but with rcu_assign_pointer() and an rcu_dereference().
-
 MP+polockmbonce+poacquiresilsil.litmus
 	Protect the access with a lock and an smp_mb__after_spinlock()
 	in one process, and use an acquire load followed by a pair of
diff --git a/tools/memory-model/scripts/README b/tools/memory-model/scripts/README
index 095c7eb36f9f..cc2c4e5be9ec 100644
--- a/tools/memory-model/scripts/README
+++ b/tools/memory-model/scripts/README
@@ -27,6 +27,14 @@ checklitmushist.sh
 checklitmus.sh
 
 	Check a single litmus test against its "Result:" expected result.
+	Not intended to for manual use.
+
+checktheselitmus.sh
+
+	Check the specified list of litmus tests against their "Result:"
+	expected results.  This takes optional parseargs.sh arguments,
+	followed by "--" followed by pathnames starting from the current
+	directory.
 
 cmplitmushist.sh
 
@@ -43,10 +51,10 @@ initlitmushist.sh
 
 judgelitmus.sh
 
-	Given a .litmus file and its .litmus.out herd7 output, check the
-	.litmus.out file against the .litmus file's "Result:" comment to
-	judge whether the test ran correctly.  Not normally run manually,
-	provided instead for use by other scripts.
+	Given a .litmus file and its herd7 output, check the output file
+	against the .litmus file's "Result:" comment to judge whether
+	the test ran correctly.  Not normally run manually, provided
+	instead for use by other scripts.
 
 newlitmushist.sh
 
diff --git a/tools/memory-model/scripts/checkalllitmus.sh b/tools/memory-model/scripts/checkalllitmus.sh
index 3c0c7fbbd223..2d3ee850a839 100755
--- a/tools/memory-model/scripts/checkalllitmus.sh
+++ b/tools/memory-model/scripts/checkalllitmus.sh
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 # SPDX-License-Identifier: GPL-2.0+
 #
 # Run herd7 tests on all .litmus files in the litmus-tests directory
@@ -8,6 +8,11 @@
 # "^^^".  It also outputs verification results to a file whose name is
 # that of the specified litmus test, but with ".out" appended.
 #
+# If the --hw argument is specified, this script translates the .litmus
+# C-language file to the specified type of assembly and verifies that.
+# But in this case, litmus tests using complex synchronization (such as
+# locking, RCU, and SRCU) are cheerfully ignored.
+#
 # Usage:
 #	checkalllitmus.sh
 #
@@ -17,7 +22,7 @@
 #
 # Copyright IBM Corporation, 2018
 #
-# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
 
 . scripts/parseargs.sh
 
@@ -30,29 +35,23 @@ else
 	exit 255
 fi
 
-# Create any new directories that have appeared in the github litmus
-# repo since the last run.
+# Create any new directories that have appeared in the litmus-tests
+# directory since the last run.
 if test "$LKMM_DESTDIR" != "."
 then
 	find $litmusdir -type d -print |
 	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
 fi
 
-# Find the checklitmus script.  If it is not where we expect it, then
-# assume that the caller has the PATH environment variable set
-# appropriately.
-if test -x scripts/checklitmus.sh
-then
-	clscript=scripts/checklitmus.sh
-else
-	clscript=checklitmus.sh
-fi
-
 # Run the script on all the litmus tests in the specified directory
 ret=0
 for i in $litmusdir/*.litmus
 do
-	if ! $clscript $i
+	if test -n "$LKMM_HW_MAP_FILE" && ! scripts/simpletest.sh $i
+	then
+		continue
+	fi
+	if ! scripts/checklitmus.sh $i
 	then
 		ret=1
 	fi
diff --git a/tools/memory-model/scripts/checkghlitmus.sh b/tools/memory-model/scripts/checkghlitmus.sh
index 6589fbb6f653..cedd0290b73f 100755
--- a/tools/memory-model/scripts/checkghlitmus.sh
+++ b/tools/memory-model/scripts/checkghlitmus.sh
@@ -10,6 +10,7 @@
 # parseargs.sh scripts for arguments.
 
 . scripts/parseargs.sh
+. scripts/hwfnseg.sh
 
 T=/tmp/checkghlitmus.sh.$$
 trap 'rm -rf $T' 0
@@ -32,19 +33,19 @@ then
 	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
 fi
 
-# Create a list of the C-language litmus tests previously run.
-( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
-	sed -e 's/\.out$//' |
+# Create a list of the specified litmus tests previously run.
+( cd $LKMM_DESTDIR; find litmus -name "*.litmus${hwfnseg}.out" -print ) |
+	sed -e "s/${hwfnseg}"'\.out$//' |
 	xargs -r egrep -l '^ \* Result: (Never|Sometimes|Always|DEADLOCK)' |
 	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
 
 # Create a list of C-language litmus tests with "Result:" commands and
 # no more than the specified number of processes.
-find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C
+find litmus -name '*.litmus' -print | mselect7 -arch C > $T/list-C
 xargs < $T/list-C -r egrep -l '^ \* Result: (Never|Sometimes|Always|DEADLOCK)' > $T/list-C-result
 xargs < $T/list-C-result -r grep -L "^P${LKMM_PROCS}" > $T/list-C-result-short
 
-# Form list of tests without corresponding .litmus.out files
+# Form list of tests without corresponding .out files
 sort $T/list-C-already $T/list-C-result-short | uniq -u > $T/list-C-needed
 
 # Run any needed tests.
diff --git a/tools/memory-model/scripts/checklitmus.sh b/tools/memory-model/scripts/checklitmus.sh
index 11461ed40b5e..4c1d0cf0ddad 100755
--- a/tools/memory-model/scripts/checklitmus.sh
+++ b/tools/memory-model/scripts/checklitmus.sh
@@ -1,10 +1,8 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0+
 #
-# Run a herd7 test and invokes judgelitmus.sh to check the result against
-# a "Result:" comment within the litmus test.  It also outputs verification
-# results to a file whose name is that of the specified litmus test, but
-# with ".out" appended.
+# Invokes runlitmus.sh and judgelitmus.sh on its arguments to run the
+# specified litmus test and pass judgment on the results.
 #
 # Usage:
 #	checklitmus.sh file.litmus
@@ -15,20 +13,7 @@
 #
 # Copyright IBM Corporation, 2018
 #
-# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
 
-litmus=$1
-herdoptions=${LKMM_HERD_OPTIONS--conf linux-kernel.cfg}
-
-if test -f "$litmus" -a -r "$litmus"
-then
-	:
-else
-	echo ' --- ' error: \"$litmus\" is not a readable file
-	exit 255
-fi
-
-echo Herd options: $herdoptions > $LKMM_DESTDIR/$litmus.out
-/usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $litmus >> $LKMM_DESTDIR/$litmus.out 2>&1
-
-scripts/judgelitmus.sh $litmus
+scripts/runlitmus.sh $1
+scripts/judgelitmus.sh $1
diff --git a/tools/memory-model/scripts/checklitmushist.sh b/tools/memory-model/scripts/checklitmushist.sh
index 1d210ffb7c8a..406ecfc0aee4 100755
--- a/tools/memory-model/scripts/checklitmushist.sh
+++ b/tools/memory-model/scripts/checklitmushist.sh
@@ -12,7 +12,7 @@
 #
 # Copyright IBM Corporation, 2018
 #
-# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
 
 . scripts/parseargs.sh
 
diff --git a/tools/memory-model/scripts/checktheselitmus.sh b/tools/memory-model/scripts/checktheselitmus.sh
new file mode 100755
index 000000000000..10eeb5ecea6d
--- /dev/null
+++ b/tools/memory-model/scripts/checktheselitmus.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Invokes checklitmus.sh on its arguments to run the specified litmus
+# test and pass judgment on the results.
+#
+# Usage:
+#	checktheselitmus.sh -- [ file1.litmus [ file2.litmus ... ] ]
+#
+# Run this in the directory containing the memory model, specifying the
+# pathname of the litmus test to check.  The usual parseargs.sh arguments
+# can be specified prior to the "--".
+#
+# This script is intended for use with pathnames that start from the
+# tools/memory-model directory.  If some of the pathnames instead start at
+# the root directory, they all must do so and the "--destdir /" parseargs.sh
+# argument must be specified prior to the "--".  Alternatively, some other
+# "--destdir" argument can be supplied as long as the needed subdirectories
+# are populated.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
+
+. scripts/parseargs.sh
+
+ret=0
+for i in "$@"
+do
+	if scripts/checklitmus.sh $i
+	then
+		:
+	else
+		ret=1
+	fi
+done
+if test "$ret" -ne 0
+then
+	echo " ^^^ VERIFICATION MISMATCHES" 1>&2
+else
+	echo All litmus tests verified as was expected. 1>&2
+fi
+exit $ret
diff --git a/tools/memory-model/scripts/cmplitmushist.sh b/tools/memory-model/scripts/cmplitmushist.sh
index 0f498aeeccf5..ca1ac8b64614 100755
--- a/tools/memory-model/scripts/cmplitmushist.sh
+++ b/tools/memory-model/scripts/cmplitmushist.sh
@@ -12,12 +12,49 @@ trap 'rm -rf $T' 0
 mkdir $T
 
 # comparetest oldpath newpath
+badmacnam=0
+timedout=0
 perfect=0
 obsline=0
 noobsline=0
 obsresult=0
 badcompare=0
 comparetest () {
+	if grep -q ': Unknown macro ' $1 || grep -q ': Unknown macro ' $2
+	then
+		if grep -q ': Unknown macro ' $1
+		then
+			badname=`grep ': Unknown macro ' $1 |
+				sed -e 's/^.*: Unknown macro //' |
+				sed -e 's/ (User error).*$//'`
+			echo 'Current LKMM version does not know "'$badname'"' $1
+		fi
+		if grep -q ': Unknown macro ' $2
+		then
+			badname=`grep ': Unknown macro ' $2 |
+				sed -e 's/^.*: Unknown macro //' |
+				sed -e 's/ (User error).*$//'`
+			echo 'Current LKMM version does not know "'$badname'"' $2
+		fi
+		badmacnam=`expr "$badmacnam" + 1`
+		return 0
+	elif grep -q '^Command exited with non-zero status 124' $1 ||
+	     grep -q '^Command exited with non-zero status 124' $2
+	then
+		if grep -q '^Command exited with non-zero status 124' $1 &&
+		   grep -q '^Command exited with non-zero status 124' $2
+		then
+			echo Both runs timed out: $2
+		elif grep -q '^Command exited with non-zero status 124' $1
+		then
+			echo Old run timed out: $2
+		elif grep -q '^Command exited with non-zero status 124' $2
+		then
+			echo New run timed out: $2
+		fi
+		timedout=`expr "$timedout" + 1`
+		return 0
+	fi
 	grep -v 'maxresident)k\|minor)pagefaults\|^Time' $1 > $T/oldout
 	grep -v 'maxresident)k\|minor)pagefaults\|^Time' $2 > $T/newout
 	if cmp -s $T/oldout $T/newout && grep -q '^Observation' $1
@@ -38,7 +75,7 @@ comparetest () {
 			return 0
 		fi
 	else
-		echo Missing Observation line "(e.g., herd7 timeout)": $2
+		echo Missing Observation line "(e.g., syntax error)": $2
 		noobsline=`expr "$noobsline" + 1`
 		return 0
 	fi
@@ -72,12 +109,20 @@ then
 fi
 if test "$noobsline" -ne 0
 then
-	echo Missing Observation line "(e.g., herd7 timeout)": $noobsline 1>&2
+	echo Missing Observation line "(e.g., syntax error)": $noobsline 1>&2
 fi
 if test "$obsresult" -ne 0
 then
 	echo Matching Observation Always/Sometimes/Never result: $obsresult 1>&2
 fi
+if test "$timedout" -ne 0
+then
+	echo "!!!" Timed out: $timedout 1>&2
+fi
+if test "$badmacnam" -ne 0
+then
+	echo "!!!" Unknown primitive: $badmacnam 1>&2
+fi
 if test "$badcompare" -ne 0
 then
 	echo "!!!" Result changed: $badcompare 1>&2
diff --git a/tools/memory-model/scripts/hwfnseg.sh b/tools/memory-model/scripts/hwfnseg.sh
new file mode 100755
index 000000000000..580c3281181c
--- /dev/null
+++ b/tools/memory-model/scripts/hwfnseg.sh
@@ -0,0 +1,20 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Generate the hardware extension to the litmus-test filename, or the
+# empty string if this is an LKMM run.  The extension is placed in
+# the shell variable hwfnseg.
+#
+# Usage:
+#	. hwfnseg.sh
+#
+# Copyright IBM Corporation, 2019
+#
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
+
+if test -z "$LKMM_HW_MAP_FILE"
+then
+	hwfnseg=
+else
+	hwfnseg=".$LKMM_HW_MAP_FILE"
+fi
diff --git a/tools/memory-model/scripts/initlitmushist.sh b/tools/memory-model/scripts/initlitmushist.sh
index 956b6957484d..31ea782955d3 100755
--- a/tools/memory-model/scripts/initlitmushist.sh
+++ b/tools/memory-model/scripts/initlitmushist.sh
@@ -60,7 +60,7 @@ fi
 
 # Create a list of the C-language litmus tests with no more than the
 # specified number of processes (per the --procs argument).
-find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C
+find litmus -name '*.litmus' -print | mselect7 -arch C > $T/list-C
 xargs < $T/list-C -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
 
 scripts/runlitmushist.sh < $T/list-C-short
diff --git a/tools/memory-model/scripts/judgelitmus.sh b/tools/memory-model/scripts/judgelitmus.sh
index 0cc63875e395..1ec5d89fcfbb 100755
--- a/tools/memory-model/scripts/judgelitmus.sh
+++ b/tools/memory-model/scripts/judgelitmus.sh
@@ -1,9 +1,22 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0+
 #
-# Given a .litmus test and the corresponding .litmus.out file, check
-# the .litmus.out file against the "Result:" comment to judge whether
-# the test ran correctly.
+# Given a .litmus test and the corresponding litmus output file, check
+# the .litmus.out file against the "Result:" comment to judge whether the
+# test ran correctly.  If the --hw argument is omitted, check against the
+# LKMM output, which is assumed to be in file.litmus.out. If either a
+# "DATARACE" marker in the "Result:" comment or a "Flag data-race" marker
+# in the LKMM output is present, the other must also be as well, at least
+# for litmus tests having a "Result:" comment. In this case, a failure of
+# the Always/Sometimes/Never portion of the "Result:" prediction will be
+# noted, but forgiven.
+#
+# If the --hw argument is provided, this is assumed to be a hardware
+# test, and the output is assumed to be in file.litmus.HW.out, where
+# "HW" is the --hw argument. In addition, non-Sometimes verification
+# results will be noted, but forgiven.  Furthermore, if there is no
+# "Result:" comment but there is an LKMM .litmus.out file, the observation
+# in that file will be used to judge the assembly-language verification.
 #
 # Usage:
 #	judgelitmus.sh file.litmus
@@ -13,7 +26,7 @@
 #
 # Copyright IBM Corporation, 2018
 #
-# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
 
 litmus=$1
 
@@ -24,55 +37,120 @@ else
 	echo ' --- ' error: \"$litmus\" is not a readable file
 	exit 255
 fi
-if test -f "$LKMM_DESTDIR/$litmus".out -a -r "$LKMM_DESTDIR/$litmus".out
+if test -z "$LKMM_HW_MAP_FILE"
+then
+	litmusout=$litmus.out
+	lkmmout=
+else
+	litmusout="`echo $litmus |
+		sed -e 's/\.litmus$/.litmus.'${LKMM_HW_MAP_FILE}'/'`.out"
+	lkmmout=$litmus.out
+fi
+if test -f "$LKMM_DESTDIR/$litmusout" -a -r "$LKMM_DESTDIR/$litmusout"
 then
 	:
 else
-	echo ' --- ' error: \"$LKMM_DESTDIR/$litmus\".out is not a readable file
+	echo ' --- ' error: \"$LKMM_DESTDIR/$litmusout is not a readable file
 	exit 255
 fi
-if grep -q '^ \* Result: ' $litmus
+if grep -q '^Flag data-race$' "$LKMM_DESTDIR/$litmusout"
+then
+	datarace_modeled=1
+fi
+if grep -q '^[( ]\* Result: ' $litmus
+then
+	outcome=`grep -m 1 '^[( ]\* Result: ' $litmus | awk '{ print $3 }'`
+	if grep -m1 '^[( ]\* Result: .* DATARACE' $litmus
+	then
+		datarace_predicted=1
+	fi
+	if test -n "$datarace_predicted" -a -z "$datarace_modeled" -a -z "$LKMM_HW_MAP_FILE"
+	then
+		echo '!!! Predicted data race not modeled' $litmus
+		exit 252
+	elif test -z "$datarace_predicted" -a -n "$datarace_modeled"
+	then
+		# Note that hardware models currently don't model data races
+		echo '!!! Unexpected data race modeled' $litmus
+		exit 253
+	fi
+elif test -n "$LKMM_HW_MAP_FILE" && grep -q '^Observation' $LKMM_DESTDIR/$lkmmout > /dev/null 2>&1
 then
-	outcome=`grep -m 1 '^ \* Result: ' $litmus | awk '{ print $3 }'`
+	outcome=`grep -m 1 '^Observation ' $LKMM_DESTDIR/$lkmmout | awk '{ print $3 }'`
 else
 	outcome=specified
 fi
 
-grep '^Observation' $LKMM_DESTDIR/$litmus.out
-if grep -q '^Observation' $LKMM_DESTDIR/$litmus.out
+grep '^Observation' $LKMM_DESTDIR/$litmusout
+if grep -q '^Observation' $LKMM_DESTDIR/$litmusout
 then
 	:
+elif grep ': Unknown macro ' $LKMM_DESTDIR/$litmusout
+then
+	badname=`grep ': Unknown macro ' $LKMM_DESTDIR/$litmusout |
+		sed -e 's/^.*: Unknown macro //' |
+		sed -e 's/ (User error).*$//'`
+	badmsg=' !!! Current LKMM version does not know "'$badname'"'" $litmus"
+	echo $badmsg
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmusout
+	then
+		echo ' !!! '$badmsg >> $LKMM_DESTDIR/$litmusout 2>&1
+	fi
+	exit 254
+elif grep '^Command exited with non-zero status 124' $LKMM_DESTDIR/$litmusout
+then
+	echo ' !!! Timeout' $litmus
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmusout
+	then
+		echo ' !!! Timeout' >> $LKMM_DESTDIR/$litmusout 2>&1
+	fi
+	exit 124
 else
 	echo ' !!! Verification error' $litmus
-	if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmusout
 	then
-		echo ' !!! Verification error' >> $LKMM_DESTDIR/$litmus.out 2>&1
+		echo ' !!! Verification error' >> $LKMM_DESTDIR/$litmusout 2>&1
 	fi
 	exit 255
 fi
 if test "$outcome" = DEADLOCK
 then
-	if grep '^Observation' $LKMM_DESTDIR/$litmus.out | grep -q 'Never 0 0$'
+	if grep '^Observation' $LKMM_DESTDIR/$litmusout | grep -q 'Never 0 0$'
 	then
 		ret=0
 	else
 		echo " !!! Unexpected non-$outcome verification" $litmus
-		if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+		if ! grep -q '!!!' $LKMM_DESTDIR/$litmusout
 		then
-			echo " !!! Unexpected non-$outcome verification" >> $LKMM_DESTDIR/$litmus.out 2>&1
+			echo " !!! Unexpected non-$outcome verification" >> $LKMM_DESTDIR/$litmusout 2>&1
 		fi
 		ret=1
 	fi
-elif grep '^Observation' $LKMM_DESTDIR/$litmus.out | grep -q $outcome || test "$outcome" = Maybe
+elif grep '^Observation' $LKMM_DESTDIR/$litmusout | grep -q 'Never 0 0$'
+then
+	echo " !!! Unexpected non-$outcome deadlock" $litmus
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmusout
+	then
+		echo " !!! Unexpected non-$outcome deadlock" $litmus >> $LKMM_DESTDIR/$litmusout 2>&1
+	fi
+	ret=1
+elif grep '^Observation' $LKMM_DESTDIR/$litmusout | grep -q $outcome || test "$outcome" = Maybe
 then
 	ret=0
 else
-	echo " !!! Unexpected non-$outcome verification" $litmus
-	if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+	if test \( -n "$LKMM_HW_MAP_FILE" -a "$outcome" = Sometimes \) -o -n "$datarace_modeled"
 	then
-		echo " !!! Unexpected non-$outcome verification" >> $LKMM_DESTDIR/$litmus.out 2>&1
+		flag="--- Forgiven"
+		ret=0
+	else
+		flag="!!! Unexpected"
+		ret=1
+	fi
+	echo " $flag non-$outcome verification" $litmus
+	if ! grep -qe "$flag" $LKMM_DESTDIR/$litmusout
+	then
+		echo " $flag non-$outcome verification" >> $LKMM_DESTDIR/$litmusout 2>&1
 	fi
-	ret=1
 fi
-tail -2 $LKMM_DESTDIR/$litmus.out | head -1
+tail -2 $LKMM_DESTDIR/$litmusout | head -1
 exit $ret
diff --git a/tools/memory-model/scripts/newlitmushist.sh b/tools/memory-model/scripts/newlitmushist.sh
index 991f8f814881..25235e2049cf 100755
--- a/tools/memory-model/scripts/newlitmushist.sh
+++ b/tools/memory-model/scripts/newlitmushist.sh
@@ -12,7 +12,7 @@
 #
 # Copyright IBM Corporation, 2018
 #
-# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
 
 . scripts/parseargs.sh
 
@@ -43,7 +43,7 @@ fi
 
 # Form full list of litmus tests with no more than the specified
 # number of processes (per the --procs argument).
-find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C-all
+find litmus -name '*.litmus' -print | mselect7 -arch C > $T/list-C-all
 xargs < $T/list-C-all -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
 
 # Form list of new tests.  Note: This does not handle litmus-test deletion!
diff --git a/tools/memory-model/scripts/parseargs.sh b/tools/memory-model/scripts/parseargs.sh
index 40f52080fdbd..08ded5909860 100755
--- a/tools/memory-model/scripts/parseargs.sh
+++ b/tools/memory-model/scripts/parseargs.sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0+
 #
-# the corresponding .litmus.out file, and does not judge the result.
+# Parse arguments common to the various scripts.
 #
 # . scripts/parseargs.sh
 #
@@ -9,7 +9,7 @@
 #
 # Copyright IBM Corporation, 2018
 #
-# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
 
 T=/tmp/parseargs.sh.$$
 mkdir $T
@@ -27,6 +27,7 @@ initparam () {
 
 initparam LKMM_DESTDIR "."
 initparam LKMM_HERD_OPTIONS "-conf linux-kernel.cfg"
+initparam LKMM_HW_MAP_FILE ""
 initparam LKMM_JOBS `getconf _NPROCESSORS_ONLN`
 initparam LKMM_PROCS "3"
 initparam LKMM_TIMEOUT "1m"
@@ -37,10 +38,11 @@ usagehelp () {
 	echo "Usage $scriptname [ arguments ]"
 	echo "      --destdir path (place for .litmus.out, default by .litmus)"
 	echo "      --herdopts -conf linux-kernel.cfg ..."
+	echo "      --hw AArch64"
 	echo "      --jobs N (number of jobs, default one per CPU)"
 	echo "      --procs N (litmus tests with at most this many processes)"
 	echo "      --timeout N (herd7 timeout (e.g., 10s, 1m, 2hr, 1d, '')"
-	echo "Defaults: --destdir '$LKMM_DESTDIR_DEF' --herdopts '$LKMM_HERD_OPTIONS_DEF' --jobs '$LKMM_JOBS_DEF' --procs '$LKMM_PROCS_DEF' --timeout '$LKMM_TIMEOUT_DEF'"
+	echo "Defaults: --destdir '$LKMM_DESTDIR_DEF' --herdopts '$LKMM_HERD_OPTIONS_DEF' --hw '$LKMM_HW_MAP_FILE' --jobs '$LKMM_JOBS_DEF' --procs '$LKMM_PROCS_DEF' --timeout '$LKMM_TIMEOUT_DEF'"
 	exit 1
 }
 
@@ -81,7 +83,7 @@ do
 			echo "Cannot create directory --destdir '$LKMM_DESTDIR'"
 			usage
 		fi
-		if test -d "$LKMM_DESTDIR" -a -w "$LKMM_DESTDIR" -a -x "$LKMM_DESTDIR"
+		if test -d "$LKMM_DESTDIR" -a -x "$LKMM_DESTDIR"
 		then
 			:
 		else
@@ -95,6 +97,11 @@ do
 		LKMM_HERD_OPTIONS="$2"
 		shift
 		;;
+	--hw)
+		checkarg --hw "(.map file architecture name)" "$#" "$2" '^[A-Za-z0-9_-]\+' '^--'
+		LKMM_HW_MAP_FILE="$2"
+		shift
+		;;
 	-j[1-9]*)
 		njobs="`echo $1 | sed -e 's/^-j//'`"
 		trailchars="`echo $njobs | sed -e 's/[0-9]\+\(.*\)$/\1/'`"
@@ -106,7 +113,7 @@ do
 		LKMM_JOBS="`echo $njobs | sed -e 's/^\([0-9]\+\).*$/\1/'`"
 		;;
 	--jobs|--job|-j)
-		checkarg --jobs "(number)" "$#" "$2" '^[1-9][0-9]\+$' '^--'
+		checkarg --jobs "(number)" "$#" "$2" '^[1-9][0-9]*$' '^--'
 		LKMM_JOBS="$2"
 		shift
 		;;
@@ -120,6 +127,10 @@ do
 		LKMM_TIMEOUT="$2"
 		shift
 		;;
+	--)
+		shift
+		break
+		;;
 	*)
 		echo Unknown argument $1
 		usage
diff --git a/tools/memory-model/scripts/runlitmus.sh b/tools/memory-model/scripts/runlitmus.sh
new file mode 100755
index 000000000000..94608d4b6502
--- /dev/null
+++ b/tools/memory-model/scripts/runlitmus.sh
@@ -0,0 +1,80 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Without the -hw argument, runs a herd7 test and outputs verification
+# results to a file whose name is that of the specified litmus test,
+# but with ".out" appended.
+#
+# If the --hw argument is specified, this script translates the .litmus
+# C-language file to the specified type of assembly and verifies that.
+# But in this case, litmus tests using complex synchronization (such as
+# locking, RCU, and SRCU) are cheerfully ignored.
+#
+# Either way, return the status of the herd7 command.
+#
+# Usage:
+#	runlitmus.sh file.litmus
+#
+# Run this in the directory containing the memory model, specifying the
+# pathname of the litmus test to check.  The caller is expected to have
+# properly set up the LKMM environment variables.
+#
+# Copyright IBM Corporation, 2019
+#
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
+
+litmus=$1
+if test -f "$litmus" -a -r "$litmus"
+then
+	:
+else
+	echo ' !!! ' error: \"$litmus\" is not a readable file
+	exit 255
+fi
+
+if test -z "$LKMM_HW_MAP_FILE" -o ! -e $LKMM_DESTDIR/$litmus.out
+then
+	# LKMM run
+	herdoptions=${LKMM_HERD_OPTIONS--conf linux-kernel.cfg}
+	echo Herd options: $herdoptions > $LKMM_DESTDIR/$litmus.out
+	/usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $litmus >> $LKMM_DESTDIR/$litmus.out 2>&1
+	ret=$?
+	if test -z "$LKMM_HW_MAP_FILE"
+	then
+		exit $ret
+	fi
+	echo " --- " Automatically generated LKMM output for '"'--hw $LKMM_HW_MAP_FILE'"' run
+fi
+
+# Hardware run
+
+T=/tmp/checklitmushw.sh.$$
+trap 'rm -rf $T' 0 2
+mkdir $T
+
+# Generate filenames
+mapfile="Linux2${LKMM_HW_MAP_FILE}.map"
+themefile="$T/${LKMM_HW_MAP_FILE}.theme"
+herdoptions="-model $LKMM_HW_CAT_FILE"
+hwlitmus=`echo $litmus | sed -e 's/\.litmus$/.litmus.'${LKMM_HW_MAP_FILE}'/'`
+hwlitmusfile=`echo $hwlitmus | sed -e 's,^.*/,,'`
+
+# Don't run on litmus tests with complex synchronization
+if ! scripts/simpletest.sh $litmus
+then
+	echo ' --- ' error: \"$litmus\" contains locking, RCU, or SRCU
+	exit 254
+fi
+
+# Generate the assembly code and run herd7 on it.
+gen_theme7 -n 10 -map $mapfile -call Linux.call > $themefile
+jingle7 -v -theme $themefile $litmus > $LKMM_DESTDIR/$hwlitmus 2> $T/$hwlitmusfile.jingle7.out
+if grep -q "Generated 0 tests" $T/$hwlitmusfile.jingle7.out
+then
+	echo ' !!! ' jingle7 failed, errors in $hwlitmus.err
+	cp $T/$hwlitmusfile.jingle7.out $LKMM_DESTDIR/$hwlitmus.err
+	exit 253
+fi
+/usr/bin/time $LKMM_TIMEOUT_CMD herd7 -unroll 0 $LKMM_DESTDIR/$hwlitmus > $LKMM_DESTDIR/$hwlitmus.out 2>&1
+
+exit $?
diff --git a/tools/memory-model/scripts/runlitmushist.sh b/tools/memory-model/scripts/runlitmushist.sh
index 6ed376f495bb..c6c2bdc67a50 100755
--- a/tools/memory-model/scripts/runlitmushist.sh
+++ b/tools/memory-model/scripts/runlitmushist.sh
@@ -13,7 +13,9 @@
 #
 # Copyright IBM Corporation, 2018
 #
-# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
+
+. scripts/hwfnseg.sh
 
 T=/tmp/runlitmushist.sh.$$
 trap 'rm -rf $T' 0
@@ -30,15 +32,12 @@ fi
 # Prefixes for per-CPU scripts
 for ((i=0;i<$LKMM_JOBS;i++))
 do
-	echo dir="$LKMM_DESTDIR" > $T/$i.sh
 	echo T=$T >> $T/$i.sh
-	echo herdoptions=\"$LKMM_HERD_OPTIONS\" >> $T/$i.sh
 	cat << '___EOF___' >> $T/$i.sh
 	runtest () {
-		echo ' ... ' /usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $1 '>' $dir/$1.out '2>&1'
-		if /usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $1 > $dir/$1.out 2>&1
+		if scripts/runlitmus.sh $1
 		then
-			if ! grep -q '^Observation ' $dir/$1.out
+			if ! grep -q '^Observation ' $LKMM_DESTDIR/$1$2.out
 			then
 				echo ' !!! Herd failed, no Observation:' $1
 			fi
@@ -47,10 +46,16 @@ do
 			if test "$exitcode" -eq 124
 			then
 				exitmsg="timed out"
+			elif test "$exitcode" -eq 253
+			then
+				exitmsg=
 			else
 				exitmsg="failed, exit code $exitcode"
 			fi
-			echo ' !!! Herd' ${exitmsg}: $1
+			if test -n "$exitmsg"
+			then
+				echo ' !!! Herd' ${exitmsg}: $1
+			fi
 		fi
 	}
 ___EOF___
@@ -59,11 +64,13 @@ done
 awk -v q="'" -v b='\\' '
 {
 	print "echo `grep " q "^P[0-9]" b "+(" q " " $0 " | tail -1 | sed -e " q "s/^P" b "([0-9]" b "+" b ")(.*$/" b "1/" q "` " $0
-}' | bash |
-sort -k1n |
-awk -v ncpu=$LKMM_JOBS -v t=$T '
+}' | sh | sort -k1n |
+awk -v dq='"' -v hwfnseg="$hwfnseg" -v ncpu="$LKMM_JOBS" -v t="$T" '
 {
-	print "runtest " $2 >> t "/" NR % ncpu ".sh";
+	print "if test -z " dq hwfnseg dq " || scripts/simpletest.sh " dq $2 dq
+	print "then"
+	print "\techo runtest " dq $2 dq " " hwfnseg " >> " t "/" NR % ncpu ".sh";
+	print "fi"
 }
 
 END {
diff --git a/tools/memory-model/scripts/simpletest.sh b/tools/memory-model/scripts/simpletest.sh
new file mode 100755
index 000000000000..7edc5d361665
--- /dev/null
+++ b/tools/memory-model/scripts/simpletest.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Give zero status if this is a simple test and non-zero otherwise.
+# Simple tests do not contain locking, RCU, or SRCU.
+#
+# Usage:
+#	simpletest.sh file.litmus
+#
+# Copyright IBM Corporation, 2019
+#
+# Author: Paul E. McKenney <paulmck@linux.ibm.com>
+
+
+litmus=$1
+
+if test -f "$litmus" -a -r "$litmus"
+then
+	:
+else
+	echo ' --- ' error: \"$litmus\" is not a readable file
+	exit 255
+fi
+exclude="^[[:space:]]*\("
+exclude="${exclude}spin_lock(\|spin_unlock(\|spin_trylock(\|spin_is_locked("
+exclude="${exclude}\|rcu_read_lock(\|rcu_read_unlock("
+exclude="${exclude}\|synchronize_rcu(\|synchronize_rcu_expedited("
+exclude="${exclude}\|srcu_read_lock(\|srcu_read_unlock("
+exclude="${exclude}\|synchronize_srcu(\|synchronize_srcu_expedited("
+exclude="${exclude}\)"
+if grep -q $exclude $litmus
+then
+	exit 255
+fi
+exit 0
diff --git a/tools/objtool/Documentation/stack-validation.txt b/tools/objtool/Documentation/stack-validation.txt
index de094670050b..faa47c3aafae 100644
--- a/tools/objtool/Documentation/stack-validation.txt
+++ b/tools/objtool/Documentation/stack-validation.txt
@@ -289,6 +289,32 @@ they mean, and suggestions for how to fix them.
       might be corrupt due to a gcc bug.  For more details, see:
       https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70646
 
+9. file.o: warning: objtool: funcA() call to funcB() with UACCESS enabled
+
+   This means that an unexpected call to a non-whitelisted function exists
+   outside of arch-specific guards.
+   X86: SMAP (stac/clac): __uaccess_begin()/__uaccess_end()
+   ARM: PAN: uaccess_enable()/uaccess_disable()
+
+   These functions should be called to denote a minimal critical section around
+   access to __user variables. See also: https://lwn.net/Articles/517475/
+
+   The intention of the warning is to prevent calls to funcB() from eventually
+   calling schedule(), potentially leaking the AC flags state, and not
+   restoring them correctly.
+
+   It also helps verify that there are no unexpected calls to funcB() which may
+   access user space pages with protections against doing so disabled.
+
+   To fix, either:
+   1) remove explicit calls to funcB() from funcA().
+   2) add the correct guards before and after calls to low level functions like
+      __get_user_size()/__put_user_size().
+   3) add funcB to uaccess_safe_builtin whitelist in tools/objtool/check.c, if
+      funcB obviously does not call schedule(), and is marked notrace (since
+      function tracing inserts additional calls, which is not obvious from the
+      sources).
+
 
 If the error doesn't seem to make sense, it could be a bug in objtool.
 Feel free to ask the objtool maintainer for help.
diff --git a/tools/objtool/Makefile b/tools/objtool/Makefile
index f591c4d1b6fe..6b91388aecbb 100644
--- a/tools/objtool/Makefile
+++ b/tools/objtool/Makefile
@@ -35,7 +35,8 @@ all: $(OBJTOOL)
 
 INCLUDES := -I$(srctree)/tools/include \
 	    -I$(srctree)/tools/arch/$(HOSTARCH)/include/uapi \
-	    -I$(srctree)/tools/arch/$(SRCARCH)/include
+	    -I$(srctree)/tools/arch/$(SRCARCH)/include	\
+	    -I$(srctree)/tools/objtool/arch/$(SRCARCH)/include
 WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed
 CFLAGS   := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
 LDFLAGS  += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
@@ -49,10 +50,10 @@ export srctree OUTPUT CFLAGS SRCARCH AWK
 include $(srctree)/tools/build/Makefile.include
 
 $(OBJTOOL_IN): fixdep FORCE
+	@$(CONFIG_SHELL) ./sync-check.sh
 	@$(MAKE) $(build)=objtool
 
 $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
-	@$(CONFIG_SHELL) ./sync-check.sh
 	$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
 
 
diff --git a/tools/objtool/arch.h b/tools/objtool/arch.h
index ced3765c4f44..445b8fa73ccb 100644
--- a/tools/objtool/arch.h
+++ b/tools/objtool/arch.h
@@ -19,6 +19,7 @@ enum insn_type {
 	INSN_CALL,
 	INSN_CALL_DYNAMIC,
 	INSN_RETURN,
+	INSN_EXCEPTION_RETURN,
 	INSN_CONTEXT_SWITCH,
 	INSN_STACK,
 	INSN_BUG,
@@ -64,15 +65,23 @@ struct op_src {
 struct stack_op {
 	struct op_dest dest;
 	struct op_src src;
+	struct list_head list;
 };
 
-void arch_initial_func_cfi_state(struct cfi_state *state);
+struct instruction;
 
-int arch_decode_instruction(struct elf *elf, struct section *sec,
+void arch_initial_func_cfi_state(struct cfi_init_state *state);
+
+int arch_decode_instruction(const struct elf *elf, const struct section *sec,
 			    unsigned long offset, unsigned int maxlen,
 			    unsigned int *len, enum insn_type *type,
-			    unsigned long *immediate, struct stack_op *op);
+			    unsigned long *immediate,
+			    struct list_head *ops_list);
 
 bool arch_callee_saved_reg(unsigned char reg);
 
+unsigned long arch_jump_destination(struct instruction *insn);
+
+unsigned long arch_dest_rela_offset(int addend);
+
 #endif /* _ARCH_H */
diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c
index a62e032863a8..c45a0b4e0760 100644
--- a/tools/objtool/arch/x86/decode.c
+++ b/tools/objtool/arch/x86/decode.c
@@ -11,6 +11,7 @@
 #include "../../../arch/x86/lib/inat.c"
 #include "../../../arch/x86/lib/insn.c"
 
+#include "../../check.h"
 #include "../../elf.h"
 #include "../../arch.h"
 #include "../../warn.h"
@@ -26,7 +27,7 @@ static unsigned char op_to_cfi_reg[][2] = {
 	{CFI_DI, CFI_R15},
 };
 
-static int is_x86_64(struct elf *elf)
+static int is_x86_64(const struct elf *elf)
 {
 	switch (elf->ehdr.e_machine) {
 	case EM_X86_64:
@@ -66,16 +67,28 @@ bool arch_callee_saved_reg(unsigned char reg)
 	}
 }
 
-int arch_decode_instruction(struct elf *elf, struct section *sec,
+unsigned long arch_dest_rela_offset(int addend)
+{
+	return addend + 4;
+}
+
+unsigned long arch_jump_destination(struct instruction *insn)
+{
+	return insn->offset + insn->len + insn->immediate;
+}
+
+int arch_decode_instruction(const struct elf *elf, const struct section *sec,
 			    unsigned long offset, unsigned int maxlen,
 			    unsigned int *len, enum insn_type *type,
-			    unsigned long *immediate, struct stack_op *op)
+			    unsigned long *immediate,
+			    struct list_head *ops_list)
 {
 	struct insn insn;
 	int x86_64, sign;
 	unsigned char op1, op2, rex = 0, rex_b = 0, rex_r = 0, rex_w = 0,
 		      rex_x = 0, modrm = 0, modrm_mod = 0, modrm_rm = 0,
 		      modrm_reg = 0, sib = 0;
+	struct stack_op *op;
 
 	x86_64 = is_x86_64(elf);
 	if (x86_64 == -1)
@@ -85,7 +98,7 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
 	insn_get_length(&insn);
 
 	if (!insn_complete(&insn)) {
-		WARN_FUNC("can't decode instruction", sec, offset);
+		WARN("can't decode instruction at %s:0x%lx", sec->name, offset);
 		return -1;
 	}
 
@@ -116,6 +129,10 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
 	if (insn.sib.nbytes)
 		sib = insn.sib.bytes[0];
 
+	op = calloc(1, sizeof(*op));
+	if (!op)
+		return -1;
+
 	switch (op1) {
 
 	case 0x1:
@@ -429,9 +446,19 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
 		*type = INSN_RETURN;
 		break;
 
+	case 0xcf: /* iret */
+		*type = INSN_EXCEPTION_RETURN;
+
+		/* add $40, %rsp */
+		op->src.type = OP_SRC_ADD;
+		op->src.reg = CFI_SP;
+		op->src.offset = 5*8;
+		op->dest.type = OP_DEST_REG;
+		op->dest.reg = CFI_SP;
+		break;
+
 	case 0xca: /* retf */
 	case 0xcb: /* retf */
-	case 0xcf: /* iret */
 		*type = INSN_CONTEXT_SWITCH;
 		break;
 
@@ -477,10 +504,15 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
 
 	*immediate = insn.immediate.nbytes ? insn.immediate.value : 0;
 
+	if (*type == INSN_STACK || *type == INSN_EXCEPTION_RETURN)
+		list_add_tail(&op->list, ops_list);
+	else
+		free(op);
+
 	return 0;
 }
 
-void arch_initial_func_cfi_state(struct cfi_state *state)
+void arch_initial_func_cfi_state(struct cfi_init_state *state)
 {
 	int i;
 
diff --git a/tools/objtool/arch/x86/include/cfi_regs.h b/tools/objtool/arch/x86/include/cfi_regs.h
new file mode 100644
index 000000000000..79bc517efba8
--- /dev/null
+++ b/tools/objtool/arch/x86/include/cfi_regs.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _OBJTOOL_CFI_REGS_H
+#define _OBJTOOL_CFI_REGS_H
+
+#define CFI_AX			0
+#define CFI_DX			1
+#define CFI_CX			2
+#define CFI_BX			3
+#define CFI_SI			4
+#define CFI_DI			5
+#define CFI_BP			6
+#define CFI_SP			7
+#define CFI_R8			8
+#define CFI_R9			9
+#define CFI_R10			10
+#define CFI_R11			11
+#define CFI_R12			12
+#define CFI_R13			13
+#define CFI_R14			14
+#define CFI_R15			15
+#define CFI_RA			16
+#define CFI_NUM_REGS		17
+
+#endif /* _OBJTOOL_CFI_REGS_H */
diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c
index 10fbe75ab43d..be42b716166b 100644
--- a/tools/objtool/builtin-check.c
+++ b/tools/objtool/builtin-check.c
@@ -14,10 +14,11 @@
  */
 
 #include <subcmd/parse-options.h>
+#include <string.h>
 #include "builtin.h"
 #include "check.h"
 
-bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats;
+bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux;
 
 static const char * const check_usage[] = {
 	"objtool check [<options>] file.o",
@@ -32,12 +33,14 @@ const struct option check_options[] = {
 	OPT_BOOLEAN('b', "backtrace", &backtrace, "unwind on error"),
 	OPT_BOOLEAN('a', "uaccess", &uaccess, "enable uaccess checking"),
 	OPT_BOOLEAN('s', "stats", &stats, "print statistics"),
+	OPT_BOOLEAN('d', "duplicate", &validate_dup, "duplicate validation for vmlinux.o"),
+	OPT_BOOLEAN('l', "vmlinux", &vmlinux, "vmlinux.o validation"),
 	OPT_END(),
 };
 
 int cmd_check(int argc, const char **argv)
 {
-	const char *objname;
+	const char *objname, *s;
 
 	argc = parse_options(argc, argv, check_options, check_usage, 0);
 
@@ -46,5 +49,9 @@ int cmd_check(int argc, const char **argv)
 
 	objname = argv[0];
 
+	s = strstr(objname, "vmlinux.o");
+	if (s && !s[9])
+		vmlinux = true;
+
 	return check(objname, false);
 }
diff --git a/tools/objtool/builtin.h b/tools/objtool/builtin.h
index 0b907902ee79..85c979caa367 100644
--- a/tools/objtool/builtin.h
+++ b/tools/objtool/builtin.h
@@ -8,7 +8,7 @@
 #include <subcmd/parse-options.h>
 
 extern const struct option check_options[];
-extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats;
+extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux;
 
 extern int cmd_check(int argc, const char **argv);
 extern int cmd_orc(int argc, const char **argv);
diff --git a/tools/objtool/cfi.h b/tools/objtool/cfi.h
index 4427bf8ed686..c7c59c6a44ee 100644
--- a/tools/objtool/cfi.h
+++ b/tools/objtool/cfi.h
@@ -6,38 +6,33 @@
 #ifndef _OBJTOOL_CFI_H
 #define _OBJTOOL_CFI_H
 
+#include "cfi_regs.h"
+
 #define CFI_UNDEFINED		-1
 #define CFI_CFA			-2
 #define CFI_SP_INDIRECT		-3
 #define CFI_BP_INDIRECT		-4
 
-#define CFI_AX			0
-#define CFI_DX			1
-#define CFI_CX			2
-#define CFI_BX			3
-#define CFI_SI			4
-#define CFI_DI			5
-#define CFI_BP			6
-#define CFI_SP			7
-#define CFI_R8			8
-#define CFI_R9			9
-#define CFI_R10			10
-#define CFI_R11			11
-#define CFI_R12			12
-#define CFI_R13			13
-#define CFI_R14			14
-#define CFI_R15			15
-#define CFI_RA			16
-#define CFI_NUM_REGS		17
-
 struct cfi_reg {
 	int base;
 	int offset;
 };
 
-struct cfi_state {
+struct cfi_init_state {
+	struct cfi_reg regs[CFI_NUM_REGS];
 	struct cfi_reg cfa;
+};
+
+struct cfi_state {
 	struct cfi_reg regs[CFI_NUM_REGS];
+	struct cfi_reg vals[CFI_NUM_REGS];
+	struct cfi_reg cfa;
+	int stack_size;
+	int drap_reg, drap_offset;
+	unsigned char type;
+	bool bp_scratch;
+	bool drap;
+	bool end;
 };
 
 #endif /* _OBJTOOL_CFI_H */
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 4b170fd08a28..92f2eb964632 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -27,16 +27,17 @@ struct alternative {
 };
 
 const char *objname;
-struct cfi_state initial_func_cfi;
+struct cfi_init_state initial_func_cfi;
 
 struct instruction *find_insn(struct objtool_file *file,
 			      struct section *sec, unsigned long offset)
 {
 	struct instruction *insn;
 
-	hash_for_each_possible(file->insn_hash, insn, hash, offset)
+	hash_for_each_possible(file->insn_hash, insn, hash, sec_offset_hash(sec, offset)) {
 		if (insn->sec == sec && insn->offset == offset)
 			return insn;
+	}
 
 	return NULL;
 }
@@ -215,18 +216,31 @@ static bool dead_end_function(struct objtool_file *file, struct symbol *func)
 	return __dead_end_function(file, func, 0);
 }
 
-static void clear_insn_state(struct insn_state *state)
+static void init_cfi_state(struct cfi_state *cfi)
 {
 	int i;
 
-	memset(state, 0, sizeof(*state));
-	state->cfa.base = CFI_UNDEFINED;
 	for (i = 0; i < CFI_NUM_REGS; i++) {
-		state->regs[i].base = CFI_UNDEFINED;
-		state->vals[i].base = CFI_UNDEFINED;
+		cfi->regs[i].base = CFI_UNDEFINED;
+		cfi->vals[i].base = CFI_UNDEFINED;
 	}
-	state->drap_reg = CFI_UNDEFINED;
-	state->drap_offset = -1;
+	cfi->cfa.base = CFI_UNDEFINED;
+	cfi->drap_reg = CFI_UNDEFINED;
+	cfi->drap_offset = -1;
+}
+
+static void init_insn_state(struct insn_state *state, struct section *sec)
+{
+	memset(state, 0, sizeof(*state));
+	init_cfi_state(&state->cfi);
+
+	/*
+	 * We need the full vmlinux for noinstr validation, otherwise we can
+	 * not correctly determine insn->call_dest->sec (external symbols do
+	 * not have a section).
+	 */
+	if (vmlinux && sec)
+		state->noinstr = sec->noinstr;
 }
 
 /*
@@ -252,6 +266,10 @@ static int decode_instructions(struct objtool_file *file)
 		    strncmp(sec->name, ".discard.", 9))
 			sec->text = true;
 
+		if (!strcmp(sec->name, ".noinstr.text") ||
+		    !strcmp(sec->name, ".entry.text"))
+			sec->noinstr = true;
+
 		for (offset = 0; offset < sec->len; offset += insn->len) {
 			insn = malloc(sizeof(*insn));
 			if (!insn) {
@@ -260,7 +278,8 @@ static int decode_instructions(struct objtool_file *file)
 			}
 			memset(insn, 0, sizeof(*insn));
 			INIT_LIST_HEAD(&insn->alts);
-			clear_insn_state(&insn->state);
+			INIT_LIST_HEAD(&insn->stack_ops);
+			init_cfi_state(&insn->cfi);
 
 			insn->sec = sec;
 			insn->offset = offset;
@@ -269,11 +288,11 @@ static int decode_instructions(struct objtool_file *file)
 						      sec->len - offset,
 						      &insn->len, &insn->type,
 						      &insn->immediate,
-						      &insn->stack_op);
+						      &insn->stack_ops);
 			if (ret)
 				goto err;
 
-			hash_add(file->insn_hash, &insn->hash, insn->offset);
+			hash_add(file->insn_hash, &insn->hash, sec_offset_hash(sec, insn->offset));
 			list_add_tail(&insn->list, &file->insn_list);
 			nr_insns++;
 		}
@@ -477,6 +496,28 @@ static const char *uaccess_safe_builtin[] = {
 	"__asan_report_store4_noabort",
 	"__asan_report_store8_noabort",
 	"__asan_report_store16_noabort",
+	/* KCSAN */
+	"__kcsan_check_access",
+	"kcsan_found_watchpoint",
+	"kcsan_setup_watchpoint",
+	"kcsan_check_scoped_accesses",
+	"kcsan_disable_current",
+	"kcsan_enable_current_nowarn",
+	/* KCSAN/TSAN */
+	"__tsan_func_entry",
+	"__tsan_func_exit",
+	"__tsan_read_range",
+	"__tsan_write_range",
+	"__tsan_read1",
+	"__tsan_read2",
+	"__tsan_read4",
+	"__tsan_read8",
+	"__tsan_read16",
+	"__tsan_write1",
+	"__tsan_write2",
+	"__tsan_write4",
+	"__tsan_write8",
+	"__tsan_write16",
 	/* KCOV */
 	"write_comp_data",
 	"__sanitizer_cov_trace_pc",
@@ -574,13 +615,14 @@ static int add_jump_destinations(struct objtool_file *file)
 					       insn->offset, insn->len);
 		if (!rela) {
 			dest_sec = insn->sec;
-			dest_off = insn->offset + insn->len + insn->immediate;
+			dest_off = arch_jump_destination(insn);
 		} else if (rela->sym->type == STT_SECTION) {
 			dest_sec = rela->sym->sec;
-			dest_off = rela->addend + 4;
+			dest_off = arch_dest_rela_offset(rela->addend);
 		} else if (rela->sym->sec->idx) {
 			dest_sec = rela->sym->sec;
-			dest_off = rela->sym->sym.st_value + rela->addend + 4;
+			dest_off = rela->sym->sym.st_value +
+				   arch_dest_rela_offset(rela->addend);
 		} else if (strstr(rela->sym->name, "_indirect_thunk_")) {
 			/*
 			 * Retpoline jumps are really dynamic jumps in
@@ -670,7 +712,7 @@ static int add_call_destinations(struct objtool_file *file)
 		rela = find_rela_by_dest_range(file->elf, insn->sec,
 					       insn->offset, insn->len);
 		if (!rela) {
-			dest_off = insn->offset + insn->len + insn->immediate;
+			dest_off = arch_jump_destination(insn);
 			insn->call_dest = find_func_by_offset(insn->sec, dest_off);
 			if (!insn->call_dest)
 				insn->call_dest = find_symbol_by_offset(insn->sec, dest_off);
@@ -693,13 +735,14 @@ static int add_call_destinations(struct objtool_file *file)
 			}
 
 		} else if (rela->sym->type == STT_SECTION) {
+			dest_off = arch_dest_rela_offset(rela->addend);
 			insn->call_dest = find_func_by_offset(rela->sym->sec,
-							      rela->addend+4);
+							      dest_off);
 			if (!insn->call_dest) {
-				WARN_FUNC("can't find call dest symbol at %s+0x%x",
+				WARN_FUNC("can't find call dest symbol at %s+0x%lx",
 					  insn->sec, insn->offset,
 					  rela->sym->sec->name,
-					  rela->addend + 4);
+					  dest_off);
 				return -1;
 			}
 		} else
@@ -752,7 +795,8 @@ static int handle_group_alt(struct objtool_file *file,
 		}
 		memset(fake_jump, 0, sizeof(*fake_jump));
 		INIT_LIST_HEAD(&fake_jump->alts);
-		clear_insn_state(&fake_jump->state);
+		INIT_LIST_HEAD(&fake_jump->stack_ops);
+		init_cfi_state(&fake_jump->cfi);
 
 		fake_jump->sec = special_alt->new_sec;
 		fake_jump->offset = FAKE_JUMP_OFFSET;
@@ -810,7 +854,7 @@ static int handle_group_alt(struct objtool_file *file,
 		if (!insn->immediate)
 			continue;
 
-		dest_off = insn->offset + insn->len + insn->immediate;
+		dest_off = arch_jump_destination(insn);
 		if (dest_off == special_alt->new_off + special_alt->new_len) {
 			if (!fake_jump) {
 				WARN("%s: alternative jump to end of section",
@@ -905,6 +949,12 @@ static int add_special_section_alts(struct objtool_file *file)
 		}
 
 		if (special_alt->group) {
+			if (!special_alt->orig_len) {
+				WARN_FUNC("empty alternative entry",
+					  orig_insn->sec, orig_insn->offset);
+				continue;
+			}
+
 			ret = handle_group_alt(file, special_alt, orig_insn,
 					       &new_insn);
 			if (ret)
@@ -1242,15 +1292,10 @@ static int read_unwind_hints(struct objtool_file *file)
 			return -1;
 		}
 
-		cfa = &insn->state.cfa;
-
-		if (hint->type == UNWIND_HINT_TYPE_SAVE) {
-			insn->save = true;
-			continue;
+		cfa = &insn->cfi.cfa;
 
-		} else if (hint->type == UNWIND_HINT_TYPE_RESTORE) {
-			insn->restore = true;
-			insn->hint = true;
+		if (hint->type == UNWIND_HINT_TYPE_RET_OFFSET) {
+			insn->ret_offset = hint->sp_offset;
 			continue;
 		}
 
@@ -1288,8 +1333,8 @@ static int read_unwind_hints(struct objtool_file *file)
 		}
 
 		cfa->offset = hint->sp_offset;
-		insn->state.type = hint->type;
-		insn->state.end = hint->end;
+		insn->cfi.type = hint->type;
+		insn->cfi.end = hint->end;
 	}
 
 	return 0;
@@ -1330,6 +1375,53 @@ static int read_retpoline_hints(struct objtool_file *file)
 	return 0;
 }
 
+static int read_instr_hints(struct objtool_file *file)
+{
+	struct section *sec;
+	struct instruction *insn;
+	struct rela *rela;
+
+	sec = find_section_by_name(file->elf, ".rela.discard.instr_end");
+	if (!sec)
+		return 0;
+
+	list_for_each_entry(rela, &sec->rela_list, list) {
+		if (rela->sym->type != STT_SECTION) {
+			WARN("unexpected relocation symbol type in %s", sec->name);
+			return -1;
+		}
+
+		insn = find_insn(file, rela->sym->sec, rela->addend);
+		if (!insn) {
+			WARN("bad .discard.instr_end entry");
+			return -1;
+		}
+
+		insn->instr--;
+	}
+
+	sec = find_section_by_name(file->elf, ".rela.discard.instr_begin");
+	if (!sec)
+		return 0;
+
+	list_for_each_entry(rela, &sec->rela_list, list) {
+		if (rela->sym->type != STT_SECTION) {
+			WARN("unexpected relocation symbol type in %s", sec->name);
+			return -1;
+		}
+
+		insn = find_insn(file, rela->sym->sec, rela->addend);
+		if (!insn) {
+			WARN("bad .discard.instr_begin entry");
+			return -1;
+		}
+
+		insn->instr++;
+	}
+
+	return 0;
+}
+
 static void mark_rodata(struct objtool_file *file)
 {
 	struct section *sec;
@@ -1346,8 +1438,8 @@ static void mark_rodata(struct objtool_file *file)
 	 * .rodata.str1.* sections are ignored; they don't contain jump tables.
 	 */
 	for_each_sec(file, sec) {
-		if ((!strncmp(sec->name, ".rodata", 7) && !strstr(sec->name, ".str1.")) ||
-		    !strcmp(sec->name, C_JUMP_TABLE_SECTION)) {
+		if (!strncmp(sec->name, ".rodata", 7) &&
+		    !strstr(sec->name, ".str1.")) {
 			sec->rodata = true;
 			found = true;
 		}
@@ -1401,6 +1493,10 @@ static int decode_sections(struct objtool_file *file)
 	if (ret)
 		return ret;
 
+	ret = read_instr_hints(file);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
@@ -1414,42 +1510,51 @@ static bool is_fentry_call(struct instruction *insn)
 	return false;
 }
 
-static bool has_modified_stack_frame(struct insn_state *state)
+static bool has_modified_stack_frame(struct instruction *insn, struct insn_state *state)
 {
+	u8 ret_offset = insn->ret_offset;
+	struct cfi_state *cfi = &state->cfi;
 	int i;
 
-	if (state->cfa.base != initial_func_cfi.cfa.base ||
-	    state->cfa.offset != initial_func_cfi.cfa.offset ||
-	    state->stack_size != initial_func_cfi.cfa.offset ||
-	    state->drap)
+	if (cfi->cfa.base != initial_func_cfi.cfa.base || cfi->drap)
 		return true;
 
-	for (i = 0; i < CFI_NUM_REGS; i++)
-		if (state->regs[i].base != initial_func_cfi.regs[i].base ||
-		    state->regs[i].offset != initial_func_cfi.regs[i].offset)
+	if (cfi->cfa.offset != initial_func_cfi.cfa.offset + ret_offset)
+		return true;
+
+	if (cfi->stack_size != initial_func_cfi.cfa.offset + ret_offset)
+		return true;
+
+	for (i = 0; i < CFI_NUM_REGS; i++) {
+		if (cfi->regs[i].base != initial_func_cfi.regs[i].base ||
+		    cfi->regs[i].offset != initial_func_cfi.regs[i].offset)
 			return true;
+	}
 
 	return false;
 }
 
 static bool has_valid_stack_frame(struct insn_state *state)
 {
-	if (state->cfa.base == CFI_BP && state->regs[CFI_BP].base == CFI_CFA &&
-	    state->regs[CFI_BP].offset == -16)
+	struct cfi_state *cfi = &state->cfi;
+
+	if (cfi->cfa.base == CFI_BP && cfi->regs[CFI_BP].base == CFI_CFA &&
+	    cfi->regs[CFI_BP].offset == -16)
 		return true;
 
-	if (state->drap && state->regs[CFI_BP].base == CFI_BP)
+	if (cfi->drap && cfi->regs[CFI_BP].base == CFI_BP)
 		return true;
 
 	return false;
 }
 
-static int update_insn_state_regs(struct instruction *insn, struct insn_state *state)
+static int update_cfi_state_regs(struct instruction *insn,
+				  struct cfi_state *cfi,
+				  struct stack_op *op)
 {
-	struct cfi_reg *cfa = &state->cfa;
-	struct stack_op *op = &insn->stack_op;
+	struct cfi_reg *cfa = &cfi->cfa;
 
-	if (cfa->base != CFI_SP)
+	if (cfa->base != CFI_SP && cfa->base != CFI_SP_INDIRECT)
 		return 0;
 
 	/* push */
@@ -1468,20 +1573,19 @@ static int update_insn_state_regs(struct instruction *insn, struct insn_state *s
 	return 0;
 }
 
-static void save_reg(struct insn_state *state, unsigned char reg, int base,
-		     int offset)
+static void save_reg(struct cfi_state *cfi, unsigned char reg, int base, int offset)
 {
 	if (arch_callee_saved_reg(reg) &&
-	    state->regs[reg].base == CFI_UNDEFINED) {
-		state->regs[reg].base = base;
-		state->regs[reg].offset = offset;
+	    cfi->regs[reg].base == CFI_UNDEFINED) {
+		cfi->regs[reg].base = base;
+		cfi->regs[reg].offset = offset;
 	}
 }
 
-static void restore_reg(struct insn_state *state, unsigned char reg)
+static void restore_reg(struct cfi_state *cfi, unsigned char reg)
 {
-	state->regs[reg].base = CFI_UNDEFINED;
-	state->regs[reg].offset = 0;
+	cfi->regs[reg].base = initial_func_cfi.regs[reg].base;
+	cfi->regs[reg].offset = initial_func_cfi.regs[reg].offset;
 }
 
 /*
@@ -1537,11 +1641,11 @@ static void restore_reg(struct insn_state *state, unsigned char reg)
  *   41 5d			pop    %r13
  *   c3				retq
  */
-static int update_insn_state(struct instruction *insn, struct insn_state *state)
+static int update_cfi_state(struct instruction *insn, struct cfi_state *cfi,
+			     struct stack_op *op)
 {
-	struct stack_op *op = &insn->stack_op;
-	struct cfi_reg *cfa = &state->cfa;
-	struct cfi_reg *regs = state->regs;
+	struct cfi_reg *cfa = &cfi->cfa;
+	struct cfi_reg *regs = cfi->regs;
 
 	/* stack operations don't make sense with an undefined CFA */
 	if (cfa->base == CFI_UNDEFINED) {
@@ -1552,8 +1656,8 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 		return 0;
 	}
 
-	if (state->type == ORC_TYPE_REGS || state->type == ORC_TYPE_REGS_IRET)
-		return update_insn_state_regs(insn, state);
+	if (cfi->type == ORC_TYPE_REGS || cfi->type == ORC_TYPE_REGS_IRET)
+		return update_cfi_state_regs(insn, cfi, op);
 
 	switch (op->dest.type) {
 
@@ -1568,16 +1672,16 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 
 				/* mov %rsp, %rbp */
 				cfa->base = op->dest.reg;
-				state->bp_scratch = false;
+				cfi->bp_scratch = false;
 			}
 
 			else if (op->src.reg == CFI_SP &&
-				 op->dest.reg == CFI_BP && state->drap) {
+				 op->dest.reg == CFI_BP && cfi->drap) {
 
 				/* drap: mov %rsp, %rbp */
 				regs[CFI_BP].base = CFI_BP;
-				regs[CFI_BP].offset = -state->stack_size;
-				state->bp_scratch = false;
+				regs[CFI_BP].offset = -cfi->stack_size;
+				cfi->bp_scratch = false;
 			}
 
 			else if (op->src.reg == CFI_SP && cfa->base == CFI_SP) {
@@ -1592,8 +1696,8 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 				 *   ...
 				 *   mov    %rax, %rsp
 				 */
-				state->vals[op->dest.reg].base = CFI_CFA;
-				state->vals[op->dest.reg].offset = -state->stack_size;
+				cfi->vals[op->dest.reg].base = CFI_CFA;
+				cfi->vals[op->dest.reg].offset = -cfi->stack_size;
 			}
 
 			else if (op->src.reg == CFI_BP && op->dest.reg == CFI_SP &&
@@ -1604,14 +1708,14 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 				 *
 				 * Restore the original stack pointer (Clang).
 				 */
-				state->stack_size = -state->regs[CFI_BP].offset;
+				cfi->stack_size = -cfi->regs[CFI_BP].offset;
 			}
 
 			else if (op->dest.reg == cfa->base) {
 
 				/* mov %reg, %rsp */
 				if (cfa->base == CFI_SP &&
-				    state->vals[op->src.reg].base == CFI_CFA) {
+				    cfi->vals[op->src.reg].base == CFI_CFA) {
 
 					/*
 					 * This is needed for the rare case
@@ -1621,8 +1725,8 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 					 *   ...
 					 *   mov    %rcx, %rsp
 					 */
-					cfa->offset = -state->vals[op->src.reg].offset;
-					state->stack_size = cfa->offset;
+					cfa->offset = -cfi->vals[op->src.reg].offset;
+					cfi->stack_size = cfa->offset;
 
 				} else {
 					cfa->base = CFI_UNDEFINED;
@@ -1636,7 +1740,7 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 			if (op->dest.reg == CFI_SP && op->src.reg == CFI_SP) {
 
 				/* add imm, %rsp */
-				state->stack_size -= op->src.offset;
+				cfi->stack_size -= op->src.offset;
 				if (cfa->base == CFI_SP)
 					cfa->offset -= op->src.offset;
 				break;
@@ -1645,14 +1749,14 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 			if (op->dest.reg == CFI_SP && op->src.reg == CFI_BP) {
 
 				/* lea disp(%rbp), %rsp */
-				state->stack_size = -(op->src.offset + regs[CFI_BP].offset);
+				cfi->stack_size = -(op->src.offset + regs[CFI_BP].offset);
 				break;
 			}
 
 			if (op->src.reg == CFI_SP && cfa->base == CFI_SP) {
 
 				/* drap: lea disp(%rsp), %drap */
-				state->drap_reg = op->dest.reg;
+				cfi->drap_reg = op->dest.reg;
 
 				/*
 				 * lea disp(%rsp), %reg
@@ -1664,25 +1768,25 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 				 *   ...
 				 *   mov    %rcx, %rsp
 				 */
-				state->vals[op->dest.reg].base = CFI_CFA;
-				state->vals[op->dest.reg].offset = \
-					-state->stack_size + op->src.offset;
+				cfi->vals[op->dest.reg].base = CFI_CFA;
+				cfi->vals[op->dest.reg].offset = \
+					-cfi->stack_size + op->src.offset;
 
 				break;
 			}
 
-			if (state->drap && op->dest.reg == CFI_SP &&
-			    op->src.reg == state->drap_reg) {
+			if (cfi->drap && op->dest.reg == CFI_SP &&
+			    op->src.reg == cfi->drap_reg) {
 
 				 /* drap: lea disp(%drap), %rsp */
 				cfa->base = CFI_SP;
-				cfa->offset = state->stack_size = -op->src.offset;
-				state->drap_reg = CFI_UNDEFINED;
-				state->drap = false;
+				cfa->offset = cfi->stack_size = -op->src.offset;
+				cfi->drap_reg = CFI_UNDEFINED;
+				cfi->drap = false;
 				break;
 			}
 
-			if (op->dest.reg == state->cfa.base) {
+			if (op->dest.reg == cfi->cfa.base) {
 				WARN_FUNC("unsupported stack register modification",
 					  insn->sec, insn->offset);
 				return -1;
@@ -1692,18 +1796,18 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 
 		case OP_SRC_AND:
 			if (op->dest.reg != CFI_SP ||
-			    (state->drap_reg != CFI_UNDEFINED && cfa->base != CFI_SP) ||
-			    (state->drap_reg == CFI_UNDEFINED && cfa->base != CFI_BP)) {
+			    (cfi->drap_reg != CFI_UNDEFINED && cfa->base != CFI_SP) ||
+			    (cfi->drap_reg == CFI_UNDEFINED && cfa->base != CFI_BP)) {
 				WARN_FUNC("unsupported stack pointer realignment",
 					  insn->sec, insn->offset);
 				return -1;
 			}
 
-			if (state->drap_reg != CFI_UNDEFINED) {
+			if (cfi->drap_reg != CFI_UNDEFINED) {
 				/* drap: and imm, %rsp */
-				cfa->base = state->drap_reg;
-				cfa->offset = state->stack_size = 0;
-				state->drap = true;
+				cfa->base = cfi->drap_reg;
+				cfa->offset = cfi->stack_size = 0;
+				cfi->drap = true;
 			}
 
 			/*
@@ -1715,57 +1819,55 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 
 		case OP_SRC_POP:
 		case OP_SRC_POPF:
-			if (!state->drap && op->dest.type == OP_DEST_REG &&
-			    op->dest.reg == cfa->base) {
+			if (!cfi->drap && op->dest.reg == cfa->base) {
 
 				/* pop %rbp */
 				cfa->base = CFI_SP;
 			}
 
-			if (state->drap && cfa->base == CFI_BP_INDIRECT &&
-			    op->dest.type == OP_DEST_REG &&
-			    op->dest.reg == state->drap_reg &&
-			    state->drap_offset == -state->stack_size) {
+			if (cfi->drap && cfa->base == CFI_BP_INDIRECT &&
+			    op->dest.reg == cfi->drap_reg &&
+			    cfi->drap_offset == -cfi->stack_size) {
 
 				/* drap: pop %drap */
-				cfa->base = state->drap_reg;
+				cfa->base = cfi->drap_reg;
 				cfa->offset = 0;
-				state->drap_offset = -1;
+				cfi->drap_offset = -1;
 
-			} else if (regs[op->dest.reg].offset == -state->stack_size) {
+			} else if (regs[op->dest.reg].offset == -cfi->stack_size) {
 
 				/* pop %reg */
-				restore_reg(state, op->dest.reg);
+				restore_reg(cfi, op->dest.reg);
 			}
 
-			state->stack_size -= 8;
+			cfi->stack_size -= 8;
 			if (cfa->base == CFI_SP)
 				cfa->offset -= 8;
 
 			break;
 
 		case OP_SRC_REG_INDIRECT:
-			if (state->drap && op->src.reg == CFI_BP &&
-			    op->src.offset == state->drap_offset) {
+			if (cfi->drap && op->src.reg == CFI_BP &&
+			    op->src.offset == cfi->drap_offset) {
 
 				/* drap: mov disp(%rbp), %drap */
-				cfa->base = state->drap_reg;
+				cfa->base = cfi->drap_reg;
 				cfa->offset = 0;
-				state->drap_offset = -1;
+				cfi->drap_offset = -1;
 			}
 
-			if (state->drap && op->src.reg == CFI_BP &&
+			if (cfi->drap && op->src.reg == CFI_BP &&
 			    op->src.offset == regs[op->dest.reg].offset) {
 
 				/* drap: mov disp(%rbp), %reg */
-				restore_reg(state, op->dest.reg);
+				restore_reg(cfi, op->dest.reg);
 
 			} else if (op->src.reg == cfa->base &&
 			    op->src.offset == regs[op->dest.reg].offset + cfa->offset) {
 
 				/* mov disp(%rbp), %reg */
 				/* mov disp(%rsp), %reg */
-				restore_reg(state, op->dest.reg);
+				restore_reg(cfi, op->dest.reg);
 			}
 
 			break;
@@ -1780,78 +1882,78 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 
 	case OP_DEST_PUSH:
 	case OP_DEST_PUSHF:
-		state->stack_size += 8;
+		cfi->stack_size += 8;
 		if (cfa->base == CFI_SP)
 			cfa->offset += 8;
 
 		if (op->src.type != OP_SRC_REG)
 			break;
 
-		if (state->drap) {
-			if (op->src.reg == cfa->base && op->src.reg == state->drap_reg) {
+		if (cfi->drap) {
+			if (op->src.reg == cfa->base && op->src.reg == cfi->drap_reg) {
 
 				/* drap: push %drap */
 				cfa->base = CFI_BP_INDIRECT;
-				cfa->offset = -state->stack_size;
+				cfa->offset = -cfi->stack_size;
 
 				/* save drap so we know when to restore it */
-				state->drap_offset = -state->stack_size;
+				cfi->drap_offset = -cfi->stack_size;
 
-			} else if (op->src.reg == CFI_BP && cfa->base == state->drap_reg) {
+			} else if (op->src.reg == CFI_BP && cfa->base == cfi->drap_reg) {
 
 				/* drap: push %rbp */
-				state->stack_size = 0;
+				cfi->stack_size = 0;
 
 			} else if (regs[op->src.reg].base == CFI_UNDEFINED) {
 
 				/* drap: push %reg */
-				save_reg(state, op->src.reg, CFI_BP, -state->stack_size);
+				save_reg(cfi, op->src.reg, CFI_BP, -cfi->stack_size);
 			}
 
 		} else {
 
 			/* push %reg */
-			save_reg(state, op->src.reg, CFI_CFA, -state->stack_size);
+			save_reg(cfi, op->src.reg, CFI_CFA, -cfi->stack_size);
 		}
 
 		/* detect when asm code uses rbp as a scratch register */
 		if (!no_fp && insn->func && op->src.reg == CFI_BP &&
 		    cfa->base != CFI_BP)
-			state->bp_scratch = true;
+			cfi->bp_scratch = true;
 		break;
 
 	case OP_DEST_REG_INDIRECT:
 
-		if (state->drap) {
-			if (op->src.reg == cfa->base && op->src.reg == state->drap_reg) {
+		if (cfi->drap) {
+			if (op->src.reg == cfa->base && op->src.reg == cfi->drap_reg) {
 
 				/* drap: mov %drap, disp(%rbp) */
 				cfa->base = CFI_BP_INDIRECT;
 				cfa->offset = op->dest.offset;
 
 				/* save drap offset so we know when to restore it */
-				state->drap_offset = op->dest.offset;
+				cfi->drap_offset = op->dest.offset;
 			}
 
 			else if (regs[op->src.reg].base == CFI_UNDEFINED) {
 
 				/* drap: mov reg, disp(%rbp) */
-				save_reg(state, op->src.reg, CFI_BP, op->dest.offset);
+				save_reg(cfi, op->src.reg, CFI_BP, op->dest.offset);
 			}
 
 		} else if (op->dest.reg == cfa->base) {
 
 			/* mov reg, disp(%rbp) */
 			/* mov reg, disp(%rsp) */
-			save_reg(state, op->src.reg, CFI_CFA,
-				 op->dest.offset - state->cfa.offset);
+			save_reg(cfi, op->src.reg, CFI_CFA,
+				 op->dest.offset - cfi->cfa.offset);
 		}
 
 		break;
 
 	case OP_DEST_LEAVE:
-		if ((!state->drap && cfa->base != CFI_BP) ||
-		    (state->drap && cfa->base != state->drap_reg)) {
+		if ((!cfi->drap && cfa->base != CFI_BP) ||
+		    (cfi->drap && cfa->base != cfi->drap_reg)) {
 			WARN_FUNC("leave instruction with modified stack frame",
 				  insn->sec, insn->offset);
 			return -1;
@@ -1859,10 +1961,10 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 
 		/* leave (mov %rbp, %rsp; pop %rbp) */
 
-		state->stack_size = -state->regs[CFI_BP].offset - 8;
-		restore_reg(state, CFI_BP);
+		cfi->stack_size = -cfi->regs[CFI_BP].offset - 8;
+		restore_reg(cfi, CFI_BP);
 
-		if (!state->drap) {
+		if (!cfi->drap) {
 			cfa->base = CFI_SP;
 			cfa->offset -= 8;
 		}
@@ -1877,7 +1979,7 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 		}
 
 		/* pop mem */
-		state->stack_size -= 8;
+		cfi->stack_size -= 8;
 		if (cfa->base == CFI_SP)
 			cfa->offset -= 8;
 
@@ -1892,41 +1994,80 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state)
 	return 0;
 }
 
-static bool insn_state_match(struct instruction *insn, struct insn_state *state)
+static int handle_insn_ops(struct instruction *insn, struct insn_state *state)
 {
-	struct insn_state *state1 = &insn->state, *state2 = state;
+	struct stack_op *op;
+
+	list_for_each_entry(op, &insn->stack_ops, list) {
+		int res;
+
+		res = update_cfi_state(insn, &state->cfi, op);
+		if (res)
+			return res;
+
+		if (op->dest.type == OP_DEST_PUSHF) {
+			if (!state->uaccess_stack) {
+				state->uaccess_stack = 1;
+			} else if (state->uaccess_stack >> 31) {
+				WARN_FUNC("PUSHF stack exhausted",
+					  insn->sec, insn->offset);
+				return 1;
+			}
+			state->uaccess_stack <<= 1;
+			state->uaccess_stack  |= state->uaccess;
+		}
+
+		if (op->src.type == OP_SRC_POPF) {
+			if (state->uaccess_stack) {
+				state->uaccess = state->uaccess_stack & 1;
+				state->uaccess_stack >>= 1;
+				if (state->uaccess_stack == 1)
+					state->uaccess_stack = 0;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static bool insn_cfi_match(struct instruction *insn, struct cfi_state *cfi2)
+{
+	struct cfi_state *cfi1 = &insn->cfi;
 	int i;
 
-	if (memcmp(&state1->cfa, &state2->cfa, sizeof(state1->cfa))) {
+	if (memcmp(&cfi1->cfa, &cfi2->cfa, sizeof(cfi1->cfa))) {
+
 		WARN_FUNC("stack state mismatch: cfa1=%d%+d cfa2=%d%+d",
 			  insn->sec, insn->offset,
-			  state1->cfa.base, state1->cfa.offset,
-			  state2->cfa.base, state2->cfa.offset);
+			  cfi1->cfa.base, cfi1->cfa.offset,
+			  cfi2->cfa.base, cfi2->cfa.offset);
 
-	} else if (memcmp(&state1->regs, &state2->regs, sizeof(state1->regs))) {
+	} else if (memcmp(&cfi1->regs, &cfi2->regs, sizeof(cfi1->regs))) {
 		for (i = 0; i < CFI_NUM_REGS; i++) {
-			if (!memcmp(&state1->regs[i], &state2->regs[i],
+			if (!memcmp(&cfi1->regs[i], &cfi2->regs[i],
 				    sizeof(struct cfi_reg)))
 				continue;
 
 			WARN_FUNC("stack state mismatch: reg1[%d]=%d%+d reg2[%d]=%d%+d",
 				  insn->sec, insn->offset,
-				  i, state1->regs[i].base, state1->regs[i].offset,
-				  i, state2->regs[i].base, state2->regs[i].offset);
+				  i, cfi1->regs[i].base, cfi1->regs[i].offset,
+				  i, cfi2->regs[i].base, cfi2->regs[i].offset);
 			break;
 		}
 
-	} else if (state1->type != state2->type) {
+	} else if (cfi1->type != cfi2->type) {
+
 		WARN_FUNC("stack state mismatch: type1=%d type2=%d",
-			  insn->sec, insn->offset, state1->type, state2->type);
+			  insn->sec, insn->offset, cfi1->type, cfi2->type);
+
+	} else if (cfi1->drap != cfi2->drap ||
+		   (cfi1->drap && cfi1->drap_reg != cfi2->drap_reg) ||
+		   (cfi1->drap && cfi1->drap_offset != cfi2->drap_offset)) {
 
-	} else if (state1->drap != state2->drap ||
-		 (state1->drap && state1->drap_reg != state2->drap_reg) ||
-		 (state1->drap && state1->drap_offset != state2->drap_offset)) {
 		WARN_FUNC("stack state mismatch: drap1=%d(%d,%d) drap2=%d(%d,%d)",
 			  insn->sec, insn->offset,
-			  state1->drap, state1->drap_reg, state1->drap_offset,
-			  state2->drap, state2->drap_reg, state2->drap_offset);
+			  cfi1->drap, cfi1->drap_reg, cfi1->drap_offset,
+			  cfi2->drap, cfi2->drap_reg, cfi2->drap_offset);
 
 	} else
 		return true;
@@ -1952,6 +2093,13 @@ static inline const char *call_dest_name(struct instruction *insn)
 
 static int validate_call(struct instruction *insn, struct insn_state *state)
 {
+	if (state->noinstr && state->instr <= 0 &&
+	    (!insn->call_dest || !insn->call_dest->sec->noinstr)) {
+		WARN_FUNC("call to %s() leaves .noinstr.text section",
+				insn->sec, insn->offset, call_dest_name(insn));
+		return 1;
+	}
+
 	if (state->uaccess && !func_uaccess_safe(insn->call_dest)) {
 		WARN_FUNC("call to %s() with UACCESS enabled",
 				insn->sec, insn->offset, call_dest_name(insn));
@@ -1969,7 +2117,7 @@ static int validate_call(struct instruction *insn, struct insn_state *state)
 
 static int validate_sibling_call(struct instruction *insn, struct insn_state *state)
 {
-	if (has_modified_stack_frame(state)) {
+	if (has_modified_stack_frame(insn, state)) {
 		WARN_FUNC("sibling call from callable instruction with modified stack frame",
 				insn->sec, insn->offset);
 		return 1;
@@ -1980,6 +2128,12 @@ static int validate_sibling_call(struct instruction *insn, struct insn_state *st
 
 static int validate_return(struct symbol *func, struct instruction *insn, struct insn_state *state)
 {
+	if (state->noinstr && state->instr > 0) {
+		WARN_FUNC("return with instrumentation enabled",
+			  insn->sec, insn->offset);
+		return 1;
+	}
+
 	if (state->uaccess && !func_uaccess_safe(func)) {
 		WARN_FUNC("return with UACCESS enabled",
 			  insn->sec, insn->offset);
@@ -1998,13 +2152,13 @@ static int validate_return(struct symbol *func, struct instruction *insn, struct
 		return 1;
 	}
 
-	if (func && has_modified_stack_frame(state)) {
+	if (func && has_modified_stack_frame(insn, state)) {
 		WARN_FUNC("return with modified stack frame",
 			  insn->sec, insn->offset);
 		return 1;
 	}
 
-	if (state->bp_scratch) {
+	if (state->cfi.bp_scratch) {
 		WARN_FUNC("BP used as a scratch register",
 			  insn->sec, insn->offset);
 		return 1;
@@ -2020,15 +2174,14 @@ static int validate_return(struct symbol *func, struct instruction *insn, struct
  * tools/objtool/Documentation/stack-validation.txt.
  */
 static int validate_branch(struct objtool_file *file, struct symbol *func,
-			   struct instruction *first, struct insn_state state)
+			   struct instruction *insn, struct insn_state state)
 {
 	struct alternative *alt;
-	struct instruction *insn, *next_insn;
+	struct instruction *next_insn;
 	struct section *sec;
 	u8 visited;
 	int ret;
 
-	insn = first;
 	sec = insn->sec;
 
 	if (insn->alt_group && list_empty(&insn->alts)) {
@@ -2054,55 +2207,20 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
 
 		visited = 1 << state.uaccess;
 		if (insn->visited) {
-			if (!insn->hint && !insn_state_match(insn, &state))
+			if (!insn->hint && !insn_cfi_match(insn, &state.cfi))
 				return 1;
 
 			if (insn->visited & visited)
 				return 0;
 		}
 
-		if (insn->hint) {
-			if (insn->restore) {
-				struct instruction *save_insn, *i;
-
-				i = insn;
-				save_insn = NULL;
-				sym_for_each_insn_continue_reverse(file, func, i) {
-					if (i->save) {
-						save_insn = i;
-						break;
-					}
-				}
-
-				if (!save_insn) {
-					WARN_FUNC("no corresponding CFI save for CFI restore",
-						  sec, insn->offset);
-					return 1;
-				}
-
-				if (!save_insn->visited) {
-					/*
-					 * Oops, no state to copy yet.
-					 * Hopefully we can reach this
-					 * instruction from another branch
-					 * after the save insn has been
-					 * visited.
-					 */
-					if (insn == first)
-						return 0;
-
-					WARN_FUNC("objtool isn't smart enough to handle this CFI save/restore combo",
-						  sec, insn->offset);
-					return 1;
-				}
-
-				insn->state = save_insn->state;
-			}
-
-			state = insn->state;
+		if (state.noinstr)
+			state.instr += insn->instr;
 
-		} else
-			insn->state = state;
+		if (insn->hint)
+			state.cfi = insn->cfi;
+		else
+			insn->cfi = state.cfi;
 
 		insn->visited |= visited;
 
@@ -2183,6 +2301,20 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
 
 			break;
 
+		case INSN_EXCEPTION_RETURN:
+			if (handle_insn_ops(insn, &state))
+				return 1;
+
+			/*
+			 * This handles x86's sync_core() case, where we use an
+			 * IRET to self. All 'normal' IRET instructions are in
+			 * STT_NOTYPE entry symbols.
+			 */
+			if (func)
+				break;
+
+			return 0;
+
 		case INSN_CONTEXT_SWITCH:
 			if (func && (!next_insn || !next_insn->hint)) {
 				WARN_FUNC("unsupported instruction in callable function",
@@ -2192,29 +2324,8 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
 			return 0;
 
 		case INSN_STACK:
-			if (update_insn_state(insn, &state))
+			if (handle_insn_ops(insn, &state))
 				return 1;
-
-			if (insn->stack_op.dest.type == OP_DEST_PUSHF) {
-				if (!state.uaccess_stack) {
-					state.uaccess_stack = 1;
-				} else if (state.uaccess_stack >> 31) {
-					WARN_FUNC("PUSHF stack exhausted", sec, insn->offset);
-					return 1;
-				}
-				state.uaccess_stack <<= 1;
-				state.uaccess_stack  |= state.uaccess;
-			}
-
-			if (insn->stack_op.src.type == OP_SRC_POPF) {
-				if (state.uaccess_stack) {
-					state.uaccess = state.uaccess_stack & 1;
-					state.uaccess_stack >>= 1;
-					if (state.uaccess_stack == 1)
-						state.uaccess_stack = 0;
-				}
-			}
-
 			break;
 
 		case INSN_STAC:
@@ -2262,7 +2373,7 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
 			return 0;
 
 		if (!next_insn) {
-			if (state.cfa.base == CFI_UNDEFINED)
+			if (state.cfi.cfa.base == CFI_UNDEFINED)
 				return 0;
 			WARN("%s: unexpected end of section", sec->name);
 			return 1;
@@ -2274,24 +2385,34 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
 	return 0;
 }
 
-static int validate_unwind_hints(struct objtool_file *file)
+static int validate_unwind_hints(struct objtool_file *file, struct section *sec)
 {
 	struct instruction *insn;
-	int ret, warnings = 0;
 	struct insn_state state;
+	int ret, warnings = 0;
 
 	if (!file->hints)
 		return 0;
 
-	clear_insn_state(&state);
+	init_insn_state(&state, sec);
 
-	for_each_insn(file, insn) {
+	if (sec) {
+		insn = find_insn(file, sec, 0);
+		if (!insn)
+			return 0;
+	} else {
+		insn = list_first_entry(&file->insn_list, typeof(*insn), list);
+	}
+
+	while (&insn->list != &file->insn_list && (!sec || insn->sec == sec)) {
 		if (insn->hint && !insn->visited) {
 			ret = validate_branch(file, insn->func, insn, state);
 			if (ret && backtrace)
 				BT_FUNC("<=== (hint)", insn);
 			warnings += ret;
 		}
+
+		insn = list_next_entry(insn, list);
 	}
 
 	return warnings;
@@ -2406,43 +2527,69 @@ static bool ignore_unreachable_insn(struct instruction *insn)
 	return false;
 }
 
-static int validate_section(struct objtool_file *file, struct section *sec)
+static int validate_symbol(struct objtool_file *file, struct section *sec,
+			   struct symbol *sym, struct insn_state *state)
 {
-	struct symbol *func;
 	struct instruction *insn;
-	struct insn_state state;
-	int ret, warnings = 0;
+	int ret;
+
+	if (!sym->len) {
+		WARN("%s() is missing an ELF size annotation", sym->name);
+		return 1;
+	}
 
-	clear_insn_state(&state);
+	if (sym->pfunc != sym || sym->alias != sym)
+		return 0;
+
+	insn = find_insn(file, sec, sym->offset);
+	if (!insn || insn->ignore || insn->visited)
+		return 0;
+
+	state->uaccess = sym->uaccess_safe;
+
+	ret = validate_branch(file, insn->func, insn, *state);
+	if (ret && backtrace)
+		BT_FUNC("<=== (sym)", insn);
+	return ret;
+}
 
-	state.cfa = initial_func_cfi.cfa;
-	memcpy(&state.regs, &initial_func_cfi.regs,
-	       CFI_NUM_REGS * sizeof(struct cfi_reg));
-	state.stack_size = initial_func_cfi.cfa.offset;
+static int validate_section(struct objtool_file *file, struct section *sec)
+{
+	struct insn_state state;
+	struct symbol *func;
+	int warnings = 0;
 
 	list_for_each_entry(func, &sec->symbol_list, list) {
 		if (func->type != STT_FUNC)
 			continue;
 
-		if (!func->len) {
-			WARN("%s() is missing an ELF size annotation",
-			     func->name);
-			warnings++;
-		}
+		init_insn_state(&state, sec);
+		state.cfi.cfa = initial_func_cfi.cfa;
+		memcpy(&state.cfi.regs, &initial_func_cfi.regs,
+		       CFI_NUM_REGS * sizeof(struct cfi_reg));
+		state.cfi.stack_size = initial_func_cfi.cfa.offset;
 
-		if (func->pfunc != func || func->alias != func)
-			continue;
+		warnings += validate_symbol(file, sec, func, &state);
+	}
 
-		insn = find_insn(file, sec, func->offset);
-		if (!insn || insn->ignore || insn->visited)
-			continue;
+	return warnings;
+}
 
-		state.uaccess = func->uaccess_safe;
+static int validate_vmlinux_functions(struct objtool_file *file)
+{
+	struct section *sec;
+	int warnings = 0;
 
-		ret = validate_branch(file, func, insn, state);
-		if (ret && backtrace)
-			BT_FUNC("<=== (func)", insn);
-		warnings += ret;
+	sec = find_section_by_name(file->elf, ".noinstr.text");
+	if (sec) {
+		warnings += validate_section(file, sec);
+		warnings += validate_unwind_hints(file, sec);
+	}
+
+	sec = find_section_by_name(file->elf, ".entry.text");
+	if (sec) {
+		warnings += validate_section(file, sec);
+		warnings += validate_unwind_hints(file, sec);
 	}
 
 	return warnings;
@@ -2453,8 +2600,12 @@ static int validate_functions(struct objtool_file *file)
 	struct section *sec;
 	int warnings = 0;
 
-	for_each_sec(file, sec)
+	for_each_sec(file, sec) {
+		if (!(sec->sh.sh_flags & SHF_EXECINSTR))
+			continue;
+
 		warnings += validate_section(file, sec);
+	}
 
 	return warnings;
 }
@@ -2485,7 +2636,7 @@ int check(const char *_objname, bool orc)
 
 	objname = _objname;
 
-	file.elf = elf_read(objname, orc ? O_RDWR : O_RDONLY);
+	file.elf = elf_open_read(objname, orc ? O_RDWR : O_RDONLY);
 	if (!file.elf)
 		return 1;
 
@@ -2505,6 +2656,15 @@ int check(const char *_objname, bool orc)
 	if (list_empty(&file.insn_list))
 		goto out;
 
+	if (vmlinux && !validate_dup) {
+		ret = validate_vmlinux_functions(&file);
+		if (ret < 0)
+			goto out;
+
+		warnings += ret;
+		goto out;
+	}
+
 	if (retpoline) {
 		ret = validate_retpoline(&file);
 		if (ret < 0)
@@ -2517,7 +2677,7 @@ int check(const char *_objname, bool orc)
 		goto out;
 	warnings += ret;
 
-	ret = validate_unwind_hints(&file);
+	ret = validate_unwind_hints(&file, NULL);
 	if (ret < 0)
 		goto out;
 	warnings += ret;
diff --git a/tools/objtool/check.h b/tools/objtool/check.h
index f0ce8ffe7135..12a9660c960b 100644
--- a/tools/objtool/check.h
+++ b/tools/objtool/check.h
@@ -14,15 +14,12 @@
 #include <linux/hashtable.h>
 
 struct insn_state {
-	struct cfi_reg cfa;
-	struct cfi_reg regs[CFI_NUM_REGS];
-	int stack_size;
-	unsigned char type;
-	bool bp_scratch;
-	bool drap, end, uaccess, df;
+	struct cfi_state cfi;
 	unsigned int uaccess_stack;
-	int drap_reg, drap_offset;
-	struct cfi_reg vals[CFI_NUM_REGS];
+	bool uaccess;
+	bool df;
+	bool noinstr;
+	s8 instr;
 };
 
 struct instruction {
@@ -33,17 +30,20 @@ struct instruction {
 	unsigned int len;
 	enum insn_type type;
 	unsigned long immediate;
-	bool alt_group, dead_end, ignore, hint, save, restore, ignore_alts;
+	bool alt_group, dead_end, ignore, ignore_alts;
+	bool hint;
 	bool retpoline_safe;
+	s8 instr;
 	u8 visited;
+	u8 ret_offset;
 	struct symbol *call_dest;
 	struct instruction *jump_dest;
 	struct instruction *first_jump_src;
 	struct rela *jump_table;
 	struct list_head alts;
 	struct symbol *func;
-	struct stack_op stack_op;
-	struct insn_state state;
+	struct list_head stack_ops;
+	struct cfi_state cfi;
 	struct orc_entry orc;
 };
 
diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c
index c4857fa3f1d1..453b723c89d5 100644
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -27,6 +27,22 @@ static inline u32 str_hash(const char *str)
 	return jhash(str, strlen(str), 0);
 }
 
+static inline int elf_hash_bits(void)
+{
+	return vmlinux ? ELF_HASH_BITS : 16;
+}
+
+#define elf_hash_add(hashtable, node, key) \
+	hlist_add_head(node, &hashtable[hash_min(key, elf_hash_bits())])
+
+static void elf_hash_init(struct hlist_head *table)
+{
+	__hash_init(table, 1U << elf_hash_bits());
+}
+
+#define elf_hash_for_each_possible(name, obj, member, key)			\
+	hlist_for_each_entry(obj, &name[hash_min(key, elf_hash_bits())], member)
+
 static void rb_add(struct rb_root *tree, struct rb_node *node,
 		   int (*cmp)(struct rb_node *, const struct rb_node *))
 {
@@ -111,11 +127,11 @@ static int symbol_by_offset(const void *key, const struct rb_node *node)
 	return 0;
 }
 
-struct section *find_section_by_name(struct elf *elf, const char *name)
+struct section *find_section_by_name(const struct elf *elf, const char *name)
 {
 	struct section *sec;
 
-	hash_for_each_possible(elf->section_name_hash, sec, name_hash, str_hash(name))
+	elf_hash_for_each_possible(elf->section_name_hash, sec, name_hash, str_hash(name))
 		if (!strcmp(sec->name, name))
 			return sec;
 
@@ -127,7 +143,7 @@ static struct section *find_section_by_index(struct elf *elf,
 {
 	struct section *sec;
 
-	hash_for_each_possible(elf->section_hash, sec, hash, idx)
+	elf_hash_for_each_possible(elf->section_hash, sec, hash, idx)
 		if (sec->idx == idx)
 			return sec;
 
@@ -138,7 +154,7 @@ static struct symbol *find_symbol_by_index(struct elf *elf, unsigned int idx)
 {
 	struct symbol *sym;
 
-	hash_for_each_possible(elf->symbol_hash, sym, hash, idx)
+	elf_hash_for_each_possible(elf->symbol_hash, sym, hash, idx)
 		if (sym->idx == idx)
 			return sym;
 
@@ -201,18 +217,18 @@ struct symbol *find_func_containing(struct section *sec, unsigned long offset)
 	return NULL;
 }
 
-struct symbol *find_symbol_by_name(struct elf *elf, const char *name)
+struct symbol *find_symbol_by_name(const struct elf *elf, const char *name)
 {
 	struct symbol *sym;
 
-	hash_for_each_possible(elf->symbol_name_hash, sym, name_hash, str_hash(name))
+	elf_hash_for_each_possible(elf->symbol_name_hash, sym, name_hash, str_hash(name))
 		if (!strcmp(sym->name, name))
 			return sym;
 
 	return NULL;
 }
 
-struct rela *find_rela_by_dest_range(struct elf *elf, struct section *sec,
+struct rela *find_rela_by_dest_range(const struct elf *elf, struct section *sec,
 				     unsigned long offset, unsigned int len)
 {
 	struct rela *rela, *r = NULL;
@@ -224,7 +240,7 @@ struct rela *find_rela_by_dest_range(struct elf *elf, struct section *sec,
 	sec = sec->rela;
 
 	for_offset_range(o, offset, offset + len) {
-		hash_for_each_possible(elf->rela_hash, rela, hash,
+		elf_hash_for_each_possible(elf->rela_hash, rela, hash,
 				       sec_offset_hash(sec, o)) {
 			if (rela->sec != sec)
 				continue;
@@ -241,7 +257,7 @@ struct rela *find_rela_by_dest_range(struct elf *elf, struct section *sec,
 	return NULL;
 }
 
-struct rela *find_rela_by_dest(struct elf *elf, struct section *sec, unsigned long offset)
+struct rela *find_rela_by_dest(const struct elf *elf, struct section *sec, unsigned long offset)
 {
 	return find_rela_by_dest_range(elf, sec, offset, 1);
 }
@@ -309,8 +325,8 @@ static int read_sections(struct elf *elf)
 		sec->len = sec->sh.sh_size;
 
 		list_add_tail(&sec->list, &elf->sections);
-		hash_add(elf->section_hash, &sec->hash, sec->idx);
-		hash_add(elf->section_name_hash, &sec->name_hash, str_hash(sec->name));
+		elf_hash_add(elf->section_hash, &sec->hash, sec->idx);
+		elf_hash_add(elf->section_name_hash, &sec->name_hash, str_hash(sec->name));
 	}
 
 	if (stats)
@@ -394,8 +410,8 @@ static int read_symbols(struct elf *elf)
 		else
 			entry = &sym->sec->symbol_list;
 		list_add(&sym->list, entry);
-		hash_add(elf->symbol_hash, &sym->hash, sym->idx);
-		hash_add(elf->symbol_name_hash, &sym->name_hash, str_hash(sym->name));
+		elf_hash_add(elf->symbol_hash, &sym->hash, sym->idx);
+		elf_hash_add(elf->symbol_name_hash, &sym->name_hash, str_hash(sym->name));
 	}
 
 	if (stats)
@@ -456,6 +472,14 @@ static int read_symbols(struct elf *elf)
 	return -1;
 }
 
+void elf_add_rela(struct elf *elf, struct rela *rela)
+{
+	struct section *sec = rela->sec;
+
+	list_add_tail(&rela->list, &sec->rela_list);
+	elf_hash_add(elf->rela_hash, &rela->hash, rela_hash(rela));
+}
+
 static int read_relas(struct elf *elf)
 {
 	struct section *sec;
@@ -503,8 +527,7 @@ static int read_relas(struct elf *elf)
 				return -1;
 			}
 
-			list_add_tail(&rela->list, &sec->rela_list);
-			hash_add(elf->rela_hash, &rela->hash, rela_hash(rela));
+			elf_add_rela(elf, rela);
 			nr_rela++;
 		}
 		max_rela = max(max_rela, nr_rela);
@@ -519,7 +542,7 @@ static int read_relas(struct elf *elf)
 	return 0;
 }
 
-struct elf *elf_read(const char *name, int flags)
+struct elf *elf_open_read(const char *name, int flags)
 {
 	struct elf *elf;
 	Elf_Cmd cmd;
@@ -531,15 +554,16 @@ struct elf *elf_read(const char *name, int flags)
 		perror("malloc");
 		return NULL;
 	}
-	memset(elf, 0, sizeof(*elf));
+	memset(elf, 0, offsetof(struct elf, sections));
 
-	hash_init(elf->symbol_hash);
-	hash_init(elf->symbol_name_hash);
-	hash_init(elf->section_hash);
-	hash_init(elf->section_name_hash);
-	hash_init(elf->rela_hash);
 	INIT_LIST_HEAD(&elf->sections);
 
+	elf_hash_init(elf->symbol_hash);
+	elf_hash_init(elf->symbol_name_hash);
+	elf_hash_init(elf->section_hash);
+	elf_hash_init(elf->section_name_hash);
+	elf_hash_init(elf->rela_hash);
+
 	elf->fd = open(name, flags);
 	if (elf->fd == -1) {
 		fprintf(stderr, "objtool: Can't open '%s': %s\n",
@@ -676,8 +700,8 @@ struct section *elf_create_section(struct elf *elf, const char *name,
 	shstrtab->changed = true;
 
 	list_add_tail(&sec->list, &elf->sections);
-	hash_add(elf->section_hash, &sec->hash, sec->idx);
-	hash_add(elf->section_name_hash, &sec->name_hash, str_hash(sec->name));
+	elf_hash_add(elf->section_hash, &sec->hash, sec->idx);
+	elf_hash_add(elf->section_name_hash, &sec->name_hash, str_hash(sec->name));
 
 	return sec;
 }
@@ -745,7 +769,7 @@ int elf_rebuild_rela_section(struct section *sec)
 	return 0;
 }
 
-int elf_write(struct elf *elf)
+int elf_write(const struct elf *elf)
 {
 	struct section *sec;
 	Elf_Scn *s;
diff --git a/tools/objtool/elf.h b/tools/objtool/elf.h
index 0b79c2353a21..f753148f5dac 100644
--- a/tools/objtool/elf.h
+++ b/tools/objtool/elf.h
@@ -39,7 +39,7 @@ struct section {
 	char *name;
 	int idx;
 	unsigned int len;
-	bool changed, text, rodata;
+	bool changed, text, rodata, noinstr;
 };
 
 struct symbol {
@@ -70,26 +70,29 @@ struct rela {
 	bool jump_table_start;
 };
 
+#define ELF_HASH_BITS	20
+
 struct elf {
 	Elf *elf;
 	GElf_Ehdr ehdr;
 	int fd;
 	char *name;
 	struct list_head sections;
-	DECLARE_HASHTABLE(symbol_hash, 20);
-	DECLARE_HASHTABLE(symbol_name_hash, 20);
-	DECLARE_HASHTABLE(section_hash, 16);
-	DECLARE_HASHTABLE(section_name_hash, 16);
-	DECLARE_HASHTABLE(rela_hash, 20);
+	DECLARE_HASHTABLE(symbol_hash, ELF_HASH_BITS);
+	DECLARE_HASHTABLE(symbol_name_hash, ELF_HASH_BITS);
+	DECLARE_HASHTABLE(section_hash, ELF_HASH_BITS);
+	DECLARE_HASHTABLE(section_name_hash, ELF_HASH_BITS);
+	DECLARE_HASHTABLE(rela_hash, ELF_HASH_BITS);
 };
 
 #define OFFSET_STRIDE_BITS	4
 #define OFFSET_STRIDE		(1UL << OFFSET_STRIDE_BITS)
 #define OFFSET_STRIDE_MASK	(~(OFFSET_STRIDE - 1))
 
-#define for_offset_range(_offset, _start, _end)		\
-	for (_offset = ((_start) & OFFSET_STRIDE_MASK);	\
-	     _offset <= ((_end) & OFFSET_STRIDE_MASK);	\
+#define for_offset_range(_offset, _start, _end)			\
+	for (_offset = ((_start) & OFFSET_STRIDE_MASK);		\
+	     _offset >= ((_start) & OFFSET_STRIDE_MASK) &&	\
+	     _offset <= ((_end) & OFFSET_STRIDE_MASK);		\
 	     _offset += OFFSET_STRIDE)
 
 static inline u32 sec_offset_hash(struct section *sec, unsigned long offset)
@@ -111,22 +114,23 @@ static inline u32 rela_hash(struct rela *rela)
 	return sec_offset_hash(rela->sec, rela->offset);
 }
 
-struct elf *elf_read(const char *name, int flags);
-struct section *find_section_by_name(struct elf *elf, const char *name);
+struct elf *elf_open_read(const char *name, int flags);
+struct section *elf_create_section(struct elf *elf, const char *name, size_t entsize, int nr);
+struct section *elf_create_rela_section(struct elf *elf, struct section *base);
+void elf_add_rela(struct elf *elf, struct rela *rela);
+int elf_write(const struct elf *elf);
+void elf_close(struct elf *elf);
+
+struct section *find_section_by_name(const struct elf *elf, const char *name);
 struct symbol *find_func_by_offset(struct section *sec, unsigned long offset);
 struct symbol *find_symbol_by_offset(struct section *sec, unsigned long offset);
-struct symbol *find_symbol_by_name(struct elf *elf, const char *name);
+struct symbol *find_symbol_by_name(const struct elf *elf, const char *name);
 struct symbol *find_symbol_containing(struct section *sec, unsigned long offset);
-struct rela *find_rela_by_dest(struct elf *elf, struct section *sec, unsigned long offset);
-struct rela *find_rela_by_dest_range(struct elf *elf, struct section *sec,
+struct rela *find_rela_by_dest(const struct elf *elf, struct section *sec, unsigned long offset);
+struct rela *find_rela_by_dest_range(const struct elf *elf, struct section *sec,
 				     unsigned long offset, unsigned int len);
 struct symbol *find_func_containing(struct section *sec, unsigned long offset);
-struct section *elf_create_section(struct elf *elf, const char *name, size_t
-				   entsize, int nr);
-struct section *elf_create_rela_section(struct elf *elf, struct section *base);
 int elf_rebuild_rela_section(struct section *sec);
-int elf_write(struct elf *elf);
-void elf_close(struct elf *elf);
 
 #define for_each_sec(file, sec)						\
 	list_for_each_entry(sec, &file->elf->sections, list)
diff --git a/tools/objtool/orc_gen.c b/tools/objtool/orc_gen.c
index 4c0dabd28000..9d2bf2daaaa6 100644
--- a/tools/objtool/orc_gen.c
+++ b/tools/objtool/orc_gen.c
@@ -16,10 +16,10 @@ int create_orc(struct objtool_file *file)
 
 	for_each_insn(file, insn) {
 		struct orc_entry *orc = &insn->orc;
-		struct cfi_reg *cfa = &insn->state.cfa;
-		struct cfi_reg *bp = &insn->state.regs[CFI_BP];
+		struct cfi_reg *cfa = &insn->cfi.cfa;
+		struct cfi_reg *bp = &insn->cfi.regs[CFI_BP];
 
-		orc->end = insn->state.end;
+		orc->end = insn->cfi.end;
 
 		if (cfa->base == CFI_UNDEFINED) {
 			orc->sp_reg = ORC_REG_UNDEFINED;
@@ -75,7 +75,7 @@ int create_orc(struct objtool_file *file)
 
 		orc->sp_offset = cfa->offset;
 		orc->bp_offset = bp->offset;
-		orc->type = insn->state.type;
+		orc->type = insn->cfi.type;
 	}
 
 	return 0;
@@ -130,8 +130,7 @@ static int create_orc_entry(struct elf *elf, struct section *u_sec, struct secti
 	rela->offset = idx * sizeof(int);
 	rela->sec = ip_relasec;
 
-	list_add_tail(&rela->list, &ip_relasec->rela_list);
-	hash_add(elf->rela_hash, &rela->hash, rela_hash(rela));
+	elf_add_rela(elf, rela);
 
 	return 0;
 }
diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
index 31824d5269cc..6e54979c2124 100644
--- a/tools/perf/Documentation/Makefile
+++ b/tools/perf/Documentation/Makefile
@@ -48,7 +48,7 @@ man5dir=$(mandir)/man5
 man7dir=$(mandir)/man7
 
 ASCIIDOC=asciidoc
-ASCIIDOC_EXTRA = --unsafe -f asciidoc.conf
+ASCIIDOC_EXTRA += --unsafe -f asciidoc.conf
 ASCIIDOC_HTML = xhtml11
 MANPAGE_XSL = manpage-normal.xsl
 XMLTO_EXTRA =
@@ -59,7 +59,7 @@ HTML_REF = origin/html
 
 ifdef USE_ASCIIDOCTOR
 ASCIIDOC = asciidoctor
-ASCIIDOC_EXTRA = -a compat-mode
+ASCIIDOC_EXTRA += -a compat-mode
 ASCIIDOC_EXTRA += -I. -rasciidoctor-extensions
 ASCIIDOC_EXTRA += -a mansource="perf" -a manmanual="perf Manual"
 ASCIIDOC_HTML = xhtml5
diff --git a/tools/perf/Documentation/itrace.txt b/tools/perf/Documentation/itrace.txt
index 82ff7dad40c2..671e154ede03 100644
--- a/tools/perf/Documentation/itrace.txt
+++ b/tools/perf/Documentation/itrace.txt
@@ -10,6 +10,7 @@
 		e	synthesize error events
 		d	create a debug log
 		g	synthesize a call chain (use with i or x)
+		G	synthesize a call chain on existing event records
 		l	synthesize last branch entries (use with i or x)
 		s       skip initial number of events
 
diff --git a/tools/perf/Documentation/perf-bench.txt b/tools/perf/Documentation/perf-bench.txt
index 0921a3c67381..bad16512c48d 100644
--- a/tools/perf/Documentation/perf-bench.txt
+++ b/tools/perf/Documentation/perf-bench.txt
@@ -61,6 +61,9 @@ SUBSYSTEM
 'epoll'::
 	Eventpoll (epoll) stressing benchmarks.
 
+'internals'::
+	Benchmark internal perf functionality.
+
 'all'::
 	All benchmark subsystems.
 
@@ -214,6 +217,11 @@ Suite for evaluating concurrent epoll_wait calls.
 *ctl*::
 Suite for evaluating multiple epoll_ctl calls.
 
+SUITES FOR 'internals'
+~~~~~~~~~~~~~~~~~~~~~~
+*synthesize*::
+Suite for evaluating perf's event synthesis performance.
+
 SEE ALSO
 --------
 linkperf:perf[1]
diff --git a/tools/perf/Documentation/perf-c2c.txt b/tools/perf/Documentation/perf-c2c.txt
index e6150f21267d..2133eb320cb0 100644
--- a/tools/perf/Documentation/perf-c2c.txt
+++ b/tools/perf/Documentation/perf-c2c.txt
@@ -111,6 +111,17 @@ REPORT OPTIONS
 --display::
 	Switch to HITM type (rmt, lcl) to display and sort on. Total HITMs as default.
 
+--stitch-lbr::
+	Show callgraph with stitched LBRs, which may have more complete
+	callgraph. The perf.data file must have been obtained using
+	perf c2c record --call-graph lbr.
+	Disabled by default. In common cases with call stack overflows,
+	it can recreate better call stacks than the default lbr call stack
+	output. But this approach is not full proof. There can be cases
+	where it creates incorrect call stacks from incorrect matches.
+	The known limitations include exception handing such as
+	setjmp/longjmp will have calls/returns not match.
+
 C2C RECORD
 ----------
 The perf c2c record command setup options related to HITM cacheline analysis
diff --git a/tools/perf/Documentation/perf-list.txt b/tools/perf/Documentation/perf-list.txt
index 6345db33c533..376a50b3452d 100644
--- a/tools/perf/Documentation/perf-list.txt
+++ b/tools/perf/Documentation/perf-list.txt
@@ -115,6 +115,11 @@ raw encoding of 0x1A8 can be used:
  perf stat -e r1a8 -a sleep 1
  perf record -e r1a8 ...
 
+It's also possible to use pmu syntax:
+
+ perf record -e r1a8 -a sleep 1
+ perf record -e cpu/r1a8/ ...
+
 You should refer to the processor specific documentation for getting these
 details. Some of them are referenced in the SEE ALSO section below.
 
@@ -258,6 +263,9 @@ Normally all events in an event group sample, but with :S only
 the first event (the leader) samples, and it only reads the values of the
 other events in the group.
 
+However, in the case AUX area events (e.g. Intel PT or CoreSight), the AUX
+area event must be the leader, so then the second event samples, not the first.
+
 OPTIONS
 -------
 
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index f569b9ea4002..d068103690cc 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -488,6 +488,17 @@ include::itrace.txt[]
 	This option extends the perf report to show reference callgraphs,
 	which collected by reference event, in no callgraph event.
 
+--stitch-lbr::
+	Show callgraph with stitched LBRs, which may have more complete
+	callgraph. The perf.data file must have been obtained using
+	perf record --call-graph lbr.
+	Disabled by default. In common cases with call stack overflows,
+	it can recreate better call stacks than the default lbr call stack
+	output. But this approach is not full proof. There can be cases
+	where it creates incorrect call stacks from incorrect matches.
+	The known limitations include exception handing such as
+	setjmp/longjmp will have calls/returns not match.
+
 --socket-filter::
 	Only report the samples on the processor socket that match with this filter
 
diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
index 963487e82edc..372dfd110e6d 100644
--- a/tools/perf/Documentation/perf-script.txt
+++ b/tools/perf/Documentation/perf-script.txt
@@ -440,6 +440,17 @@ include::itrace.txt[]
 --show-on-off-events::
 	Show the --switch-on/off events too.
 
+--stitch-lbr::
+	Show callgraph with stitched LBRs, which may have more complete
+	callgraph. The perf.data file must have been obtained using
+	perf record --call-graph lbr.
+	Disabled by default. In common cases with call stack overflows,
+	it can recreate better call stacks than the default lbr call stack
+	output. But this approach is not full proof. There can be cases
+	where it creates incorrect call stacks from incorrect matches.
+	The known limitations include exception handing such as
+	setjmp/longjmp will have calls/returns not match.
+
 SEE ALSO
 --------
 linkperf:perf-record[1], linkperf:perf-script-perl[1],
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 487737a725e9..20227dabc208 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -319,6 +319,15 @@ Default is to monitor all CPUS.
 	go straight to the histogram browser, just like 'perf top' with no events
 	explicitely specified does.
 
+--stitch-lbr::
+	Show callgraph with stitched LBRs, which may have more complete
+	callgraph. The option must be used with --call-graph lbr recording.
+	Disabled by default. In common cases with call stack overflows,
+	it can recreate better call stacks than the default lbr call stack
+	output. But this approach is not full proof. There can be cases
+	where it creates incorrect call stacks from incorrect matches.
+	The known limitations include exception handing such as
+	setjmp/longjmp will have calls/returns not match.
 
 INTERACTIVE PROMPTING KEYS
 --------------------------
diff --git a/tools/perf/Documentation/perf.data-file-format.txt b/tools/perf/Documentation/perf.data-file-format.txt
index b0152e1095c5..b6472e463284 100644
--- a/tools/perf/Documentation/perf.data-file-format.txt
+++ b/tools/perf/Documentation/perf.data-file-format.txt
@@ -373,6 +373,22 @@ struct {
 Indicates that trace contains records of PERF_RECORD_COMPRESSED type
 that have perf_events records in compressed form.
 
+	HEADER_CPU_PMU_CAPS = 28,
+
+	A list of cpu PMU capabilities. The format of data is as below.
+
+struct {
+	u32 nr_cpu_pmu_caps;
+	{
+		char	name[];
+		char	value[];
+	} [nr_cpu_pmu_caps]
+};
+
+
+Example:
+ cpu pmu capabilities: branches=32, max_precise=3, pmu_name=icelake
+
 	other bits are reserved and should ignored for now
 	HEADER_FEAT_BITS	= 256,
 
diff --git a/tools/perf/bench/Build b/tools/perf/bench/Build
index e4e321b6f883..042827385c87 100644
--- a/tools/perf/bench/Build
+++ b/tools/perf/bench/Build
@@ -6,9 +6,9 @@ perf-y += futex-wake.o
 perf-y += futex-wake-parallel.o
 perf-y += futex-requeue.o
 perf-y += futex-lock-pi.o
-
 perf-y += epoll-wait.o
 perf-y += epoll-ctl.o
+perf-y += synthesize.o
 
 perf-$(CONFIG_X86_64) += mem-memcpy-x86-64-lib.o
 perf-$(CONFIG_X86_64) += mem-memcpy-x86-64-asm.o
diff --git a/tools/perf/bench/bench.h b/tools/perf/bench/bench.h
index 4aa6de1aa67d..4d669c803237 100644
--- a/tools/perf/bench/bench.h
+++ b/tools/perf/bench/bench.h
@@ -41,9 +41,9 @@ int bench_futex_wake_parallel(int argc, const char **argv);
 int bench_futex_requeue(int argc, const char **argv);
 /* pi futexes */
 int bench_futex_lock_pi(int argc, const char **argv);
-
 int bench_epoll_wait(int argc, const char **argv);
 int bench_epoll_ctl(int argc, const char **argv);
+int bench_synthesize(int argc, const char **argv);
 
 #define BENCH_FORMAT_DEFAULT_STR	"default"
 #define BENCH_FORMAT_DEFAULT		0
diff --git a/tools/perf/bench/sched-messaging.c b/tools/perf/bench/sched-messaging.c
index 97e4a4fb3362..71d830d7b923 100644
--- a/tools/perf/bench/sched-messaging.c
+++ b/tools/perf/bench/sched-messaging.c
@@ -40,7 +40,7 @@ struct sender_context {
 	unsigned int num_fds;
 	int ready_out;
 	int wakefd;
-	int out_fds[0];
+	int out_fds[];
 };
 
 struct receiver_context {
diff --git a/tools/perf/bench/synthesize.c b/tools/perf/bench/synthesize.c
new file mode 100644
index 000000000000..6291257bc9c9
--- /dev/null
+++ b/tools/perf/bench/synthesize.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Benchmark synthesis of perf events such as at the start of a 'perf
+ * record'. Synthesis is done on the current process and the 'dummy' event
+ * handlers are invoked that support dump_trace but otherwise do nothing.
+ *
+ * Copyright 2019 Google LLC.
+ */
+#include <stdio.h>
+#include "bench.h"
+#include "../util/debug.h"
+#include "../util/session.h"
+#include "../util/synthetic-events.h"
+#include "../util/target.h"
+#include "../util/thread_map.h"
+#include "../util/tool.h"
+#include <linux/err.h>
+#include <linux/time64.h>
+#include <subcmd/parse-options.h>
+
+static unsigned int iterations = 10000;
+
+static const struct option options[] = {
+	OPT_UINTEGER('i', "iterations", &iterations,
+		"Number of iterations used to compute average"),
+	OPT_END()
+};
+
+static const char *const usage[] = {
+	"perf bench internals synthesize <options>",
+	NULL
+};
+
+
+static int do_synthesize(struct perf_session *session,
+			struct perf_thread_map *threads,
+			struct target *target, bool data_mmap)
+{
+	const unsigned int nr_threads_synthesize = 1;
+	struct timeval start, end, diff;
+	u64 runtime_us;
+	unsigned int i;
+	double average;
+	int err;
+
+	gettimeofday(&start, NULL);
+	for (i = 0; i < iterations; i++) {
+		err = machine__synthesize_threads(&session->machines.host,
+						target, threads, data_mmap,
+						nr_threads_synthesize);
+		if (err)
+			return err;
+	}
+
+	gettimeofday(&end, NULL);
+	timersub(&end, &start, &diff);
+	runtime_us = diff.tv_sec * USEC_PER_SEC + diff.tv_usec;
+	average = (double)runtime_us/(double)iterations;
+	printf("Average %ssynthesis took: %f usec\n",
+		data_mmap ? "data " : "", average);
+	return 0;
+}
+
+int bench_synthesize(int argc, const char **argv)
+{
+	struct perf_tool tool;
+	struct perf_session *session;
+	struct target target = {
+		.pid = "self",
+	};
+	struct perf_thread_map *threads;
+	int err;
+
+	argc = parse_options(argc, argv, options, usage, 0);
+
+	session = perf_session__new(NULL, false, NULL);
+	if (IS_ERR(session)) {
+		pr_err("Session creation failed.\n");
+		return PTR_ERR(session);
+	}
+	threads = thread_map__new_by_pid(getpid());
+	if (!threads) {
+		pr_err("Thread map creation failed.\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+	perf_tool__fill_defaults(&tool);
+
+	err = do_synthesize(session, threads, &target, false);
+	if (err)
+		goto err_out;
+
+	err = do_synthesize(session, threads, &target, true);
+
+err_out:
+	if (threads)
+		perf_thread_map__put(threads);
+
+	perf_session__delete(session);
+	return err;
+}
diff --git a/tools/perf/builtin-bench.c b/tools/perf/builtin-bench.c
index c06fe21c8613..11c79a8d85d6 100644
--- a/tools/perf/builtin-bench.c
+++ b/tools/perf/builtin-bench.c
@@ -76,6 +76,11 @@ static struct bench epoll_benchmarks[] = {
 };
 #endif // HAVE_EVENTFD
 
+static struct bench internals_benchmarks[] = {
+	{ "synthesize", "Benchmark perf event synthesis",	bench_synthesize	},
+	{ NULL,		NULL,					NULL			}
+};
+
 struct collection {
 	const char	*name;
 	const char	*summary;
@@ -92,6 +97,7 @@ static struct collection collections[] = {
 #ifdef HAVE_EVENTFD
 	{"epoll",       "Epoll stressing benchmarks",                   epoll_benchmarks        },
 #endif
+	{ "internals",	"Perf-internals benchmarks",			internals_benchmarks	},
 	{ "all",	"All benchmarks",				NULL			},
 	{ NULL,		NULL,						NULL			}
 };
diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c
index 246ac0b4d54f..0d544c4fb4be 100644
--- a/tools/perf/builtin-c2c.c
+++ b/tools/perf/builtin-c2c.c
@@ -95,6 +95,7 @@ struct perf_c2c {
 	bool			 use_stdio;
 	bool			 stats_only;
 	bool			 symbol_full;
+	bool			 stitch_lbr;
 
 	/* HITM shared clines stats */
 	struct c2c_stats	hitm_stats;
@@ -273,6 +274,9 @@ static int process_sample_event(struct perf_tool *tool __maybe_unused,
 		return -1;
 	}
 
+	if (c2c.stitch_lbr)
+		al.thread->lbr_stitch_enable = true;
+
 	ret = sample__resolve_callchain(sample, &callchain_cursor, NULL,
 					evsel, &al, sysctl_perf_event_max_stack);
 	if (ret)
@@ -2601,6 +2605,12 @@ static int setup_callchain(struct evlist *evlist)
 		}
 	}
 
+	if (c2c.stitch_lbr && (mode != CALLCHAIN_LBR)) {
+		ui__warning("Can't find LBR callchain. Switch off --stitch-lbr.\n"
+			    "Please apply --call-graph lbr when recording.\n");
+		c2c.stitch_lbr = false;
+	}
+
 	callchain_param.record_mode = mode;
 	callchain_param.min_percent = 0;
 	return 0;
@@ -2752,6 +2762,8 @@ static int perf_c2c__report(int argc, const char **argv)
 	OPT_STRING('c', "coalesce", &coalesce, "coalesce fields",
 		   "coalesce fields: pid,tid,iaddr,dso"),
 	OPT_BOOLEAN('f', "force", &symbol_conf.force, "don't complain, do it"),
+	OPT_BOOLEAN(0, "stitch-lbr", &c2c.stitch_lbr,
+		    "Enable LBR callgraph stitching approach"),
 	OPT_PARENT(c2c_options),
 	OPT_END()
 	};
diff --git a/tools/perf/builtin-ftrace.c b/tools/perf/builtin-ftrace.c
index d5adc417a4ca..55eda54240fb 100644
--- a/tools/perf/builtin-ftrace.c
+++ b/tools/perf/builtin-ftrace.c
@@ -284,10 +284,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)
 		.events = POLLIN,
 	};
 
-	if (!perf_cap__capable(CAP_SYS_ADMIN)) {
+	if (!(perf_cap__capable(CAP_PERFMON) ||
+	      perf_cap__capable(CAP_SYS_ADMIN))) {
 		pr_err("ftrace only works for %s!\n",
 #ifdef HAVE_LIBCAP_SUPPORT
-		"users with the SYS_ADMIN capability"
+		"users with the CAP_PERFMON or CAP_SYS_ADMIN capability"
 #else
 		"root"
 #endif
diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
index 7e124a7b8bfd..8f983877c42d 100644
--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -51,7 +51,7 @@ struct perf_inject {
 struct event_entry {
 	struct list_head node;
 	u32		 tid;
-	union perf_event event[0];
+	union perf_event event[];
 };
 
 static int output_bytes(struct perf_inject *inject, void *buf, size_t sz)
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 26d8fc27e427..0c32767b1c56 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -84,6 +84,7 @@ struct report {
 	bool			header_only;
 	bool			nonany_branch_mode;
 	bool			group_set;
+	bool			stitch_lbr;
 	int			max_stack;
 	struct perf_read_values	show_threads_values;
 	struct annotation_options annotation_opts;
@@ -267,6 +268,9 @@ static int process_sample_event(struct perf_tool *tool,
 		return -1;
 	}
 
+	if (rep->stitch_lbr)
+		al.thread->lbr_stitch_enable = true;
+
 	if (symbol_conf.hide_unresolved && al.sym == NULL)
 		goto out_put;
 
@@ -339,6 +343,7 @@ static int report__setup_sample_type(struct report *rep)
 	bool is_pipe = perf_data__is_pipe(session->data);
 
 	if (session->itrace_synth_opts->callchain ||
+	    session->itrace_synth_opts->add_callchain ||
 	    (!is_pipe &&
 	     perf_header__has_feat(&session->header, HEADER_AUXTRACE) &&
 	     !session->itrace_synth_opts->set))
@@ -407,6 +412,12 @@ static int report__setup_sample_type(struct report *rep)
 			callchain_param.record_mode = CALLCHAIN_FP;
 	}
 
+	if (rep->stitch_lbr && (callchain_param.record_mode != CALLCHAIN_LBR)) {
+		ui__warning("Can't find LBR callchain. Switch off --stitch-lbr.\n"
+			    "Please apply --call-graph lbr when recording.\n");
+		rep->stitch_lbr = false;
+	}
+
 	/* ??? handle more cases than just ANY? */
 	if (!(perf_evlist__combined_branch_type(session->evlist) &
 				PERF_SAMPLE_BRANCH_ANY))
@@ -1257,6 +1268,8 @@ int cmd_report(int argc, const char **argv)
 			"Show full source file name path for source lines"),
 	OPT_BOOLEAN(0, "show-ref-call-graph", &symbol_conf.show_ref_callgraph,
 		    "Show callgraph from reference event"),
+	OPT_BOOLEAN(0, "stitch-lbr", &report.stitch_lbr,
+		    "Enable LBR callgraph stitching approach"),
 	OPT_INTEGER(0, "socket-filter", &report.socket_filter,
 		    "only show processor socket that match with this filter"),
 	OPT_BOOLEAN(0, "raw-trace", &symbol_conf.raw_trace,
@@ -1332,7 +1345,7 @@ int cmd_report(int argc, const char **argv)
 	if (symbol_conf.cumulate_callchain && !callchain_param.order_set)
 		callchain_param.order = ORDER_CALLER;
 
-	if (itrace_synth_opts.callchain &&
+	if ((itrace_synth_opts.callchain || itrace_synth_opts.add_callchain) &&
 	    (int)itrace_synth_opts.callchain_sz > report.max_stack)
 		report.max_stack = itrace_synth_opts.callchain_sz;
 
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index 1f57a7ecdf3d..a58bb9a69895 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -1697,6 +1697,7 @@ struct perf_script {
 	bool			show_cgroup_events;
 	bool			allocated;
 	bool			per_event_dump;
+	bool			stitch_lbr;
 	struct evswitch		evswitch;
 	struct perf_cpu_map	*cpus;
 	struct perf_thread_map *threads;
@@ -1923,6 +1924,9 @@ static void process_event(struct perf_script *script,
 	if (PRINT_FIELD(IP)) {
 		struct callchain_cursor *cursor = NULL;
 
+		if (script->stitch_lbr)
+			al->thread->lbr_stitch_enable = true;
+
 		if (symbol_conf.use_callchain && sample->callchain &&
 		    thread__resolve_callchain(al->thread, &callchain_cursor, evsel,
 					      sample, NULL, NULL, scripting_max_stack) == 0)
@@ -2040,7 +2044,7 @@ static int cleanup_scripting(void)
 
 static bool filter_cpu(struct perf_sample *sample)
 {
-	if (cpu_list)
+	if (cpu_list && sample->cpu != (u32)-1)
 		return !test_bit(sample->cpu, cpu_bitmap);
 	return false;
 }
@@ -2138,41 +2142,59 @@ static int process_attr(struct perf_tool *tool, union perf_event *event,
 	return err;
 }
 
-static int process_comm_event(struct perf_tool *tool,
-			      union perf_event *event,
-			      struct perf_sample *sample,
-			      struct machine *machine)
+static int print_event_with_time(struct perf_tool *tool,
+				 union perf_event *event,
+				 struct perf_sample *sample,
+				 struct machine *machine,
+				 pid_t pid, pid_t tid, u64 timestamp)
 {
-	struct thread *thread;
 	struct perf_script *script = container_of(tool, struct perf_script, tool);
 	struct perf_session *session = script->session;
 	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
-	int ret = -1;
+	struct thread *thread = NULL;
 
-	thread = machine__findnew_thread(machine, event->comm.pid, event->comm.tid);
-	if (thread == NULL) {
-		pr_debug("problem processing COMM event, skipping it.\n");
-		return -1;
+	if (evsel && !evsel->core.attr.sample_id_all) {
+		sample->cpu = 0;
+		sample->time = timestamp;
+		sample->pid = pid;
+		sample->tid = tid;
 	}
 
-	if (perf_event__process_comm(tool, event, sample, machine) < 0)
-		goto out;
+	if (filter_cpu(sample))
+		return 0;
 
-	if (!evsel->core.attr.sample_id_all) {
-		sample->cpu = 0;
-		sample->time = 0;
-		sample->tid = event->comm.tid;
-		sample->pid = event->comm.pid;
-	}
-	if (!filter_cpu(sample)) {
+	if (tid != -1)
+		thread = machine__findnew_thread(machine, pid, tid);
+
+	if (thread && evsel) {
 		perf_sample__fprintf_start(sample, thread, evsel,
-				   PERF_RECORD_COMM, stdout);
-		perf_event__fprintf(event, stdout);
+					   event->header.type, stdout);
 	}
-	ret = 0;
-out:
+
+	perf_event__fprintf(event, stdout);
+
 	thread__put(thread);
-	return ret;
+
+	return 0;
+}
+
+static int print_event(struct perf_tool *tool, union perf_event *event,
+		       struct perf_sample *sample, struct machine *machine,
+		       pid_t pid, pid_t tid)
+{
+	return print_event_with_time(tool, event, sample, machine, pid, tid, 0);
+}
+
+static int process_comm_event(struct perf_tool *tool,
+			      union perf_event *event,
+			      struct perf_sample *sample,
+			      struct machine *machine)
+{
+	if (perf_event__process_comm(tool, event, sample, machine) < 0)
+		return -1;
+
+	return print_event(tool, event, sample, machine, event->comm.pid,
+			   event->comm.tid);
 }
 
 static int process_namespaces_event(struct perf_tool *tool,
@@ -2180,37 +2202,11 @@ static int process_namespaces_event(struct perf_tool *tool,
 				    struct perf_sample *sample,
 				    struct machine *machine)
 {
-	struct thread *thread;
-	struct perf_script *script = container_of(tool, struct perf_script, tool);
-	struct perf_session *session = script->session;
-	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
-	int ret = -1;
-
-	thread = machine__findnew_thread(machine, event->namespaces.pid,
-					 event->namespaces.tid);
-	if (thread == NULL) {
-		pr_debug("problem processing NAMESPACES event, skipping it.\n");
-		return -1;
-	}
-
 	if (perf_event__process_namespaces(tool, event, sample, machine) < 0)
-		goto out;
+		return -1;
 
-	if (!evsel->core.attr.sample_id_all) {
-		sample->cpu = 0;
-		sample->time = 0;
-		sample->tid = event->namespaces.tid;
-		sample->pid = event->namespaces.pid;
-	}
-	if (!filter_cpu(sample)) {
-		perf_sample__fprintf_start(sample, thread, evsel,
-					   PERF_RECORD_NAMESPACES, stdout);
-		perf_event__fprintf(event, stdout);
-	}
-	ret = 0;
-out:
-	thread__put(thread);
-	return ret;
+	return print_event(tool, event, sample, machine, event->namespaces.pid,
+			   event->namespaces.tid);
 }
 
 static int process_cgroup_event(struct perf_tool *tool,
@@ -2218,34 +2214,11 @@ static int process_cgroup_event(struct perf_tool *tool,
 				struct perf_sample *sample,
 				struct machine *machine)
 {
-	struct thread *thread;
-	struct perf_script *script = container_of(tool, struct perf_script, tool);
-	struct perf_session *session = script->session;
-	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
-	int ret = -1;
-
-	thread = machine__findnew_thread(machine, sample->pid, sample->tid);
-	if (thread == NULL) {
-		pr_debug("problem processing CGROUP event, skipping it.\n");
-		return -1;
-	}
-
 	if (perf_event__process_cgroup(tool, event, sample, machine) < 0)
-		goto out;
+		return -1;
 
-	if (!evsel->core.attr.sample_id_all) {
-		sample->cpu = 0;
-		sample->time = 0;
-	}
-	if (!filter_cpu(sample)) {
-		perf_sample__fprintf_start(sample, thread, evsel,
-					   PERF_RECORD_CGROUP, stdout);
-		perf_event__fprintf(event, stdout);
-	}
-	ret = 0;
-out:
-	thread__put(thread);
-	return ret;
+	return print_event(tool, event, sample, machine, sample->pid,
+			    sample->tid);
 }
 
 static int process_fork_event(struct perf_tool *tool,
@@ -2253,69 +2226,24 @@ static int process_fork_event(struct perf_tool *tool,
 			      struct perf_sample *sample,
 			      struct machine *machine)
 {
-	struct thread *thread;
-	struct perf_script *script = container_of(tool, struct perf_script, tool);
-	struct perf_session *session = script->session;
-	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
-
 	if (perf_event__process_fork(tool, event, sample, machine) < 0)
 		return -1;
 
-	thread = machine__findnew_thread(machine, event->fork.pid, event->fork.tid);
-	if (thread == NULL) {
-		pr_debug("problem processing FORK event, skipping it.\n");
-		return -1;
-	}
-
-	if (!evsel->core.attr.sample_id_all) {
-		sample->cpu = 0;
-		sample->time = event->fork.time;
-		sample->tid = event->fork.tid;
-		sample->pid = event->fork.pid;
-	}
-	if (!filter_cpu(sample)) {
-		perf_sample__fprintf_start(sample, thread, evsel,
-					   PERF_RECORD_FORK, stdout);
-		perf_event__fprintf(event, stdout);
-	}
-	thread__put(thread);
-
-	return 0;
+	return print_event_with_time(tool, event, sample, machine,
+				     event->fork.pid, event->fork.tid,
+				     event->fork.time);
 }
 static int process_exit_event(struct perf_tool *tool,
 			      union perf_event *event,
 			      struct perf_sample *sample,
 			      struct machine *machine)
 {
-	int err = 0;
-	struct thread *thread;
-	struct perf_script *script = container_of(tool, struct perf_script, tool);
-	struct perf_session *session = script->session;
-	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
-
-	thread = machine__findnew_thread(machine, event->fork.pid, event->fork.tid);
-	if (thread == NULL) {
-		pr_debug("problem processing EXIT event, skipping it.\n");
+	/* Print before 'exit' deletes anything */
+	if (print_event_with_time(tool, event, sample, machine, event->fork.pid,
+				  event->fork.tid, event->fork.time))
 		return -1;
-	}
-
-	if (!evsel->core.attr.sample_id_all) {
-		sample->cpu = 0;
-		sample->time = 0;
-		sample->tid = event->fork.tid;
-		sample->pid = event->fork.pid;
-	}
-	if (!filter_cpu(sample)) {
-		perf_sample__fprintf_start(sample, thread, evsel,
-					   PERF_RECORD_EXIT, stdout);
-		perf_event__fprintf(event, stdout);
-	}
 
-	if (perf_event__process_exit(tool, event, sample, machine) < 0)
-		err = -1;
-
-	thread__put(thread);
-	return err;
+	return perf_event__process_exit(tool, event, sample, machine);
 }
 
 static int process_mmap_event(struct perf_tool *tool,
@@ -2323,33 +2251,11 @@ static int process_mmap_event(struct perf_tool *tool,
 			      struct perf_sample *sample,
 			      struct machine *machine)
 {
-	struct thread *thread;
-	struct perf_script *script = container_of(tool, struct perf_script, tool);
-	struct perf_session *session = script->session;
-	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
-
 	if (perf_event__process_mmap(tool, event, sample, machine) < 0)
 		return -1;
 
-	thread = machine__findnew_thread(machine, event->mmap.pid, event->mmap.tid);
-	if (thread == NULL) {
-		pr_debug("problem processing MMAP event, skipping it.\n");
-		return -1;
-	}
-
-	if (!evsel->core.attr.sample_id_all) {
-		sample->cpu = 0;
-		sample->time = 0;
-		sample->tid = event->mmap.tid;
-		sample->pid = event->mmap.pid;
-	}
-	if (!filter_cpu(sample)) {
-		perf_sample__fprintf_start(sample, thread, evsel,
-					   PERF_RECORD_MMAP, stdout);
-		perf_event__fprintf(event, stdout);
-	}
-	thread__put(thread);
-	return 0;
+	return print_event(tool, event, sample, machine, event->mmap.pid,
+			   event->mmap.tid);
 }
 
 static int process_mmap2_event(struct perf_tool *tool,
@@ -2357,33 +2263,11 @@ static int process_mmap2_event(struct perf_tool *tool,
 			      struct perf_sample *sample,
 			      struct machine *machine)
 {
-	struct thread *thread;
-	struct perf_script *script = container_of(tool, struct perf_script, tool);
-	struct perf_session *session = script->session;
-	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
-
 	if (perf_event__process_mmap2(tool, event, sample, machine) < 0)
 		return -1;
 
-	thread = machine__findnew_thread(machine, event->mmap2.pid, event->mmap2.tid);
-	if (thread == NULL) {
-		pr_debug("problem processing MMAP2 event, skipping it.\n");
-		return -1;
-	}
-
-	if (!evsel->core.attr.sample_id_all) {
-		sample->cpu = 0;
-		sample->time = 0;
-		sample->tid = event->mmap2.tid;
-		sample->pid = event->mmap2.pid;
-	}
-	if (!filter_cpu(sample)) {
-		perf_sample__fprintf_start(sample, thread, evsel,
-					   PERF_RECORD_MMAP2, stdout);
-		perf_event__fprintf(event, stdout);
-	}
-	thread__put(thread);
-	return 0;
+	return print_event(tool, event, sample, machine, event->mmap2.pid,
+			   event->mmap2.tid);
 }
 
 static int process_switch_event(struct perf_tool *tool,
@@ -2391,10 +2275,7 @@ static int process_switch_event(struct perf_tool *tool,
 				struct perf_sample *sample,
 				struct machine *machine)
 {
-	struct thread *thread;
 	struct perf_script *script = container_of(tool, struct perf_script, tool);
-	struct perf_session *session = script->session;
-	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
 
 	if (perf_event__process_switch(tool, event, sample, machine) < 0)
 		return -1;
@@ -2405,20 +2286,8 @@ static int process_switch_event(struct perf_tool *tool,
 	if (!script->show_switch_events)
 		return 0;
 
-	thread = machine__findnew_thread(machine, sample->pid,
-					 sample->tid);
-	if (thread == NULL) {
-		pr_debug("problem processing SWITCH event, skipping it.\n");
-		return -1;
-	}
-
-	if (!filter_cpu(sample)) {
-		perf_sample__fprintf_start(sample, thread, evsel,
-					   PERF_RECORD_SWITCH, stdout);
-		perf_event__fprintf(event, stdout);
-	}
-	thread__put(thread);
-	return 0;
+	return print_event(tool, event, sample, machine, sample->pid,
+			   sample->tid);
 }
 
 static int
@@ -2427,23 +2296,8 @@ process_lost_event(struct perf_tool *tool,
 		   struct perf_sample *sample,
 		   struct machine *machine)
 {
-	struct perf_script *script = container_of(tool, struct perf_script, tool);
-	struct perf_session *session = script->session;
-	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
-	struct thread *thread;
-
-	thread = machine__findnew_thread(machine, sample->pid,
-					 sample->tid);
-	if (thread == NULL)
-		return -1;
-
-	if (!filter_cpu(sample)) {
-		perf_sample__fprintf_start(sample, thread, evsel,
-					   PERF_RECORD_LOST, stdout);
-		perf_event__fprintf(event, stdout);
-	}
-	thread__put(thread);
-	return 0;
+	return print_event(tool, event, sample, machine, sample->pid,
+			   sample->tid);
 }
 
 static int
@@ -2462,33 +2316,11 @@ process_bpf_events(struct perf_tool *tool __maybe_unused,
 		   struct perf_sample *sample,
 		   struct machine *machine)
 {
-	struct thread *thread;
-	struct perf_script *script = container_of(tool, struct perf_script, tool);
-	struct perf_session *session = script->session;
-	struct evsel *evsel = perf_evlist__id2evsel(session->evlist, sample->id);
-
 	if (machine__process_ksymbol(machine, event, sample) < 0)
 		return -1;
 
-	if (!evsel->core.attr.sample_id_all) {
-		perf_event__fprintf(event, stdout);
-		return 0;
-	}
-
-	thread = machine__findnew_thread(machine, sample->pid, sample->tid);
-	if (thread == NULL) {
-		pr_debug("problem processing MMAP event, skipping it.\n");
-		return -1;
-	}
-
-	if (!filter_cpu(sample)) {
-		perf_sample__fprintf_start(sample, thread, evsel,
-					   event->header.type, stdout);
-		perf_event__fprintf(event, stdout);
-	}
-
-	thread__put(thread);
-	return 0;
+	return print_event(tool, event, sample, machine, sample->pid,
+			   sample->tid);
 }
 
 static void sig_handler(int sig __maybe_unused)
@@ -2619,7 +2451,7 @@ static int __cmd_script(struct perf_script *script)
 struct script_spec {
 	struct list_head	node;
 	struct scripting_ops	*ops;
-	char			spec[0];
+	char			spec[];
 };
 
 static LIST_HEAD(script_specs);
@@ -3342,6 +3174,12 @@ static void script__setup_sample_type(struct perf_script *script)
 		else
 			callchain_param.record_mode = CALLCHAIN_FP;
 	}
+
+	if (script->stitch_lbr && (callchain_param.record_mode != CALLCHAIN_LBR)) {
+		pr_warning("Can't find LBR callchain. Switch off --stitch-lbr.\n"
+			   "Please apply --call-graph lbr when recording.\n");
+		script->stitch_lbr = false;
+	}
 }
 
 static int process_stat_round_event(struct perf_session *session,
@@ -3653,6 +3491,8 @@ int cmd_script(int argc, const char **argv)
 		   "file", "file saving guest os /proc/kallsyms"),
 	OPT_STRING(0, "guestmodules", &symbol_conf.default_guest_modules,
 		   "file", "file saving guest os /proc/modules"),
+	OPT_BOOLEAN('\0', "stitch-lbr", &script.stitch_lbr,
+		    "Enable LBR callgraph stitching approach"),
 	OPTS_EVSWITCH(&script.evswitch),
 	OPT_END()
 	};
@@ -3709,7 +3549,7 @@ int cmd_script(int argc, const char **argv)
 		return -1;
 	}
 
-	if (itrace_synth_opts.callchain &&
+	if ((itrace_synth_opts.callchain || itrace_synth_opts.add_callchain) &&
 	    itrace_synth_opts.callchain_sz > scripting_max_stack)
 		scripting_max_stack = itrace_synth_opts.callchain_sz;
 
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index ec053dc1e35c..9207b6c45475 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -686,8 +686,11 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 					break;
 			}
 		}
-		if (child_pid != -1)
+		if (child_pid != -1) {
+			if (timeout)
+				kill(child_pid, SIGTERM);
 			wait4(child_pid, &status, 0, &stat_config.ru_data);
+		}
 
 		if (workload_exec_errno) {
 			const char *emsg = str_error_r(workload_exec_errno, msg, sizeof(msg));
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index 9e84fae9b096..0ba568efa939 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -128,7 +128,7 @@ struct sample_wrapper {
 	struct sample_wrapper *next;
 
 	u64		timestamp;
-	unsigned char	data[0];
+	unsigned char	data[];
 };
 
 #define TYPE_NONE	0
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 289cf83e658a..6b067a5ba1d5 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -33,6 +33,7 @@
 #include "util/map.h"
 #include "util/mmap.h"
 #include "util/session.h"
+#include "util/thread.h"
 #include "util/symbol.h"
 #include "util/synthetic-events.h"
 #include "util/top.h"
@@ -775,6 +776,9 @@ static void perf_event__process_sample(struct perf_tool *tool,
 	if (machine__resolve(machine, &al, sample) < 0)
 		return;
 
+	if (top->stitch_lbr)
+		al.thread->lbr_stitch_enable = true;
+
 	if (!machine->kptr_restrict_warned &&
 	    symbol_conf.kptr_restrict &&
 	    al.cpumode == PERF_RECORD_MISC_KERNEL) {
@@ -1571,6 +1575,8 @@ int cmd_top(int argc, const char **argv)
 		    "Sort the output by the event at the index n in group. "
 		    "If n is invalid, sort by the first event. "
 		    "WARNING: should be used on grouped events."),
+	OPT_BOOLEAN(0, "stitch-lbr", &top.stitch_lbr,
+		    "Enable LBR callgraph stitching approach"),
 	OPTS_EVSWITCH(&top.evswitch),
 	OPT_END()
 	};
@@ -1640,6 +1646,11 @@ int cmd_top(int argc, const char **argv)
 		}
 	}
 
+	if (top.stitch_lbr && !(callchain_param.record_mode == CALLCHAIN_LBR)) {
+		pr_err("Error: --stitch-lbr must be used with --call-graph lbr\n");
+		goto out_delete_evlist;
+	}
+
 	if (opts->branch_stack && callchain_param.enabled)
 		symbol_conf.show_branchflag_count = true;
 
diff --git a/tools/perf/design.txt b/tools/perf/design.txt
index 0453ba26cdbd..a42fab308ff6 100644
--- a/tools/perf/design.txt
+++ b/tools/perf/design.txt
@@ -258,7 +258,8 @@ gets schedule to. Per task counters can be created by any user, for
 their own tasks.
 
 A 'pid == -1' and 'cpu == x' counter is a per CPU counter that counts
-all events on CPU-x. Per CPU counters need CAP_SYS_ADMIN privilege.
+all events on CPU-x. Per CPU counters need CAP_PERFMON or CAP_SYS_ADMIN
+privilege.
 
 The 'flags' parameter is currently unused and must be zero.
 
diff --git a/tools/perf/scripts/python/bin/flamegraph-record b/tools/perf/scripts/python/bin/flamegraph-record
new file mode 100755
index 000000000000..725d66e71570
--- /dev/null
+++ b/tools/perf/scripts/python/bin/flamegraph-record
@@ -0,0 +1,2 @@
+#!/usr/bin/sh
+perf record -g "$@"
diff --git a/tools/perf/scripts/python/bin/flamegraph-report b/tools/perf/scripts/python/bin/flamegraph-report
new file mode 100755
index 000000000000..b1a79afd903b
--- /dev/null
+++ b/tools/perf/scripts/python/bin/flamegraph-report
@@ -0,0 +1,3 @@
+#!/usr/bin/sh
+# description: create flame graphs
+perf script -s "$PERF_EXEC_PATH"/scripts/python/flamegraph.py -- "$@"
diff --git a/tools/perf/scripts/python/flamegraph.py b/tools/perf/scripts/python/flamegraph.py
new file mode 100755
index 000000000000..61f3be9add6b
--- /dev/null
+++ b/tools/perf/scripts/python/flamegraph.py
@@ -0,0 +1,124 @@
+# flamegraph.py - create flame graphs from perf samples
+# SPDX-License-Identifier: GPL-2.0
+#
+# Usage:
+#
+#     perf record -a -g -F 99 sleep 60
+#     perf script report flamegraph
+#
+# Combined:
+#
+#     perf script flamegraph -a -F 99 sleep 60
+#
+# Written by Andreas Gerstmayr <agerstmayr@redhat.com>
+# Flame Graphs invented by Brendan Gregg <bgregg@netflix.com>
+# Works in tandem with d3-flame-graph by Martin Spier <mspier@netflix.com>
+
+from __future__ import print_function
+import sys
+import os
+import argparse
+import json
+
+
+class Node:
+    def __init__(self, name, libtype=""):
+        self.name = name
+        self.libtype = libtype
+        self.value = 0
+        self.children = []
+
+    def toJSON(self):
+        return {
+            "n": self.name,
+            "l": self.libtype,
+            "v": self.value,
+            "c": self.children
+        }
+
+
+class FlameGraphCLI:
+    def __init__(self, args):
+        self.args = args
+        self.stack = Node("root")
+
+        if self.args.format == "html" and \
+                not os.path.isfile(self.args.template):
+            print("Flame Graph template {} does not exist. Please install "
+                  "the js-d3-flame-graph (RPM) or libjs-d3-flame-graph (deb) "
+                  "package, specify an existing flame graph template "
+                  "(--template PATH) or another output format "
+                  "(--format FORMAT).".format(self.args.template),
+                  file=sys.stderr)
+            sys.exit(1)
+
+    def find_or_create_node(self, node, name, dso):
+        libtype = "kernel" if dso == "[kernel.kallsyms]" else ""
+        if name is None:
+            name = "[unknown]"
+
+        for child in node.children:
+            if child.name == name and child.libtype == libtype:
+                return child
+
+        child = Node(name, libtype)
+        node.children.append(child)
+        return child
+
+    def process_event(self, event):
+        node = self.find_or_create_node(self.stack, event["comm"], None)
+        if "callchain" in event:
+            for entry in reversed(event['callchain']):
+                node = self.find_or_create_node(
+                    node, entry.get("sym", {}).get("name"), event.get("dso"))
+        else:
+            node = self.find_or_create_node(
+                node, entry.get("symbol"), event.get("dso"))
+        node.value += 1
+
+    def trace_end(self):
+        json_str = json.dumps(self.stack, default=lambda x: x.toJSON())
+
+        if self.args.format == "html":
+            try:
+                with open(self.args.template) as f:
+                    output_str = f.read().replace("/** @flamegraph_json **/",
+                                                  json_str)
+            except IOError as e:
+                print("Error reading template file: {}".format(e), file=sys.stderr)
+                sys.exit(1)
+            output_fn = self.args.output or "flamegraph.html"
+        else:
+            output_str = json_str
+            output_fn = self.args.output or "stacks.json"
+
+        if output_fn == "-":
+            sys.stdout.write(output_str)
+        else:
+            print("dumping data to {}".format(output_fn))
+            try:
+                with open(output_fn, "w") as out:
+                    out.write(output_str)
+            except IOError as e:
+                print("Error writing output file: {}".format(e), file=sys.stderr)
+                sys.exit(1)
+
+
+if __name__ == "__main__":
+    parser = argparse.ArgumentParser(description="Create flame graphs.")
+    parser.add_argument("-f", "--format",
+                        default="html", choices=["json", "html"],
+                        help="output file format")
+    parser.add_argument("-o", "--output",
+                        help="output file name")
+    parser.add_argument("--template",
+                        default="/usr/share/d3-flame-graph/d3-flamegraph-base.html",
+                        help="path to flamegraph HTML template")
+    parser.add_argument("-i", "--input",
+                        help=argparse.SUPPRESS)
+
+    args = parser.parse_args()
+    cli = FlameGraphCLI(args)
+
+    process_event = cli.process_event
+    trace_end = cli.trace_end
diff --git a/tools/perf/tests/expr.c b/tools/perf/tests/expr.c
index 28313e59d6f6..ea10fc4412c4 100644
--- a/tools/perf/tests/expr.c
+++ b/tools/perf/tests/expr.c
@@ -6,7 +6,7 @@
 #include <string.h>
 #include <linux/zalloc.h>
 
-static int test(struct parse_ctx *ctx, const char *e, double val2)
+static int test(struct expr_parse_ctx *ctx, const char *e, double val2)
 {
 	double val;
 
@@ -22,7 +22,7 @@ int test__expr(struct test *t __maybe_unused, int subtest __maybe_unused)
 	const char **other;
 	double val;
 	int i, ret;
-	struct parse_ctx ctx;
+	struct expr_parse_ctx ctx;
 	int num_other;
 
 	expr__ctx_init(&ctx);
diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c
index 091c3aeccc27..902bd9d591a0 100644
--- a/tools/perf/tests/parse-events.c
+++ b/tools/perf/tests/parse-events.c
@@ -1356,6 +1356,16 @@ static int test__checkevent_complex_name(struct evlist *evlist)
 	return 0;
 }
 
+static int test__checkevent_raw_pmu(struct evlist *evlist)
+{
+	struct evsel *evsel = evlist__first(evlist);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->core.nr_entries);
+	TEST_ASSERT_VAL("wrong type", PERF_TYPE_SOFTWARE == evsel->core.attr.type);
+	TEST_ASSERT_VAL("wrong config", 0x1a == evsel->core.attr.config);
+	return 0;
+}
+
 static int test__sym_event_slash(struct evlist *evlist)
 {
 	struct evsel *evsel = evlist__first(evlist);
@@ -1750,7 +1760,12 @@ static struct evlist_test test__events_pmu[] = {
 		.name  = "cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp",
 		.check = test__checkevent_complex_name,
 		.id    = 3,
-	}
+	},
+	{
+		.name  = "software/r1a/",
+		.check = test__checkevent_raw_pmu,
+		.id    = 4,
+	},
 };
 
 struct terms_test {
diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index f1ea0d61eb5b..9760d58e979a 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -1821,6 +1821,24 @@ static int symbol__disassemble_bpf(struct symbol *sym __maybe_unused,
 }
 #endif // defined(HAVE_LIBBFD_SUPPORT) && defined(HAVE_LIBBPF_SUPPORT)
 
+static int
+symbol__disassemble_bpf_image(struct symbol *sym,
+			      struct annotate_args *args)
+{
+	struct annotation *notes = symbol__annotation(sym);
+	struct disasm_line *dl;
+
+	args->offset = -1;
+	args->line = strdup("to be implemented");
+	args->line_nr = 0;
+	dl = disasm_line__new(args);
+	if (dl)
+		annotation_line__add(&dl->al, &notes->src->source);
+
+	free(args->line);
+	return 0;
+}
+
 /*
  * Possibly create a new version of line with tabs expanded. Returns the
  * existing or new line, storage is updated if a new line is allocated. If
@@ -1920,6 +1938,8 @@ static int symbol__disassemble(struct symbol *sym, struct annotate_args *args)
 
 	if (dso->binary_type == DSO_BINARY_TYPE__BPF_PROG_INFO) {
 		return symbol__disassemble_bpf(sym, args);
+	} else if (dso->binary_type == DSO_BINARY_TYPE__BPF_IMAGE) {
+		return symbol__disassemble_bpf_image(sym, args);
 	} else if (dso__is_kcore(dso)) {
 		kce.kcore_filename = symfs_filename;
 		kce.addr = map__rip_2objdump(map, sym->start);
diff --git a/tools/perf/util/annotate.h b/tools/perf/util/annotate.h
index 2d88069d6428..0a0cd4f32175 100644
--- a/tools/perf/util/annotate.h
+++ b/tools/perf/util/annotate.h
@@ -144,7 +144,7 @@ struct annotation_line {
 	u32			 idx;
 	int			 idx_asm;
 	int			 data_nr;
-	struct annotation_data	 data[0];
+	struct annotation_data	 data[];
 };
 
 struct disasm_line {
@@ -227,7 +227,7 @@ void symbol__calc_percent(struct symbol *sym, struct evsel *evsel);
 struct sym_hist {
 	u64		      nr_samples;
 	u64		      period;
-	struct sym_hist_entry addr[0];
+	struct sym_hist_entry addr[];
 };
 
 struct cyc_hist {
diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c
index 53be12b23ff4..875a0dd540e5 100644
--- a/tools/perf/util/arm-spe.c
+++ b/tools/perf/util/arm-spe.c
@@ -176,6 +176,14 @@ static void arm_spe_free(struct perf_session *session)
 	free(spe);
 }
 
+static bool arm_spe_evsel_is_auxtrace(struct perf_session *session,
+				      struct evsel *evsel)
+{
+	struct arm_spe *spe = container_of(session->auxtrace, struct arm_spe, auxtrace);
+
+	return evsel->core.attr.type == spe->pmu_type;
+}
+
 static const char * const arm_spe_info_fmts[] = {
 	[ARM_SPE_PMU_TYPE]		= "  PMU Type           %"PRId64"\n",
 };
@@ -218,6 +226,7 @@ int arm_spe_process_auxtrace_info(union perf_event *event,
 	spe->auxtrace.flush_events = arm_spe_flush;
 	spe->auxtrace.free_events = arm_spe_free_events;
 	spe->auxtrace.free = arm_spe_free;
+	spe->auxtrace.evsel_is_auxtrace = arm_spe_evsel_is_auxtrace;
 	session->auxtrace = &spe->auxtrace;
 
 	arm_spe_print_info(&auxtrace_info->priv[0]);
diff --git a/tools/perf/util/auxtrace.c b/tools/perf/util/auxtrace.c
index 3571ce72ca28..33ad33378a90 100644
--- a/tools/perf/util/auxtrace.c
+++ b/tools/perf/util/auxtrace.c
@@ -58,25 +58,6 @@
 #include "symbol/kallsyms.h"
 #include <internal/lib.h>
 
-static struct perf_pmu *perf_evsel__find_pmu(struct evsel *evsel)
-{
-	struct perf_pmu *pmu = NULL;
-
-	while ((pmu = perf_pmu__scan(pmu)) != NULL) {
-		if (pmu->type == evsel->core.attr.type)
-			break;
-	}
-
-	return pmu;
-}
-
-static bool perf_evsel__is_aux_event(struct evsel *evsel)
-{
-	struct perf_pmu *pmu = perf_evsel__find_pmu(evsel);
-
-	return pmu && pmu->auxtrace;
-}
-
 /*
  * Make a group from 'leader' to 'last', requiring that the events were not
  * already grouped to a different leader.
@@ -1234,29 +1215,79 @@ int perf_event__synthesize_auxtrace_info(struct auxtrace_record *itr,
 	return err;
 }
 
+static void unleader_evsel(struct evlist *evlist, struct evsel *leader)
+{
+	struct evsel *new_leader = NULL;
+	struct evsel *evsel;
+
+	/* Find new leader for the group */
+	evlist__for_each_entry(evlist, evsel) {
+		if (evsel->leader != leader || evsel == leader)
+			continue;
+		if (!new_leader)
+			new_leader = evsel;
+		evsel->leader = new_leader;
+	}
+
+	/* Update group information */
+	if (new_leader) {
+		zfree(&new_leader->group_name);
+		new_leader->group_name = leader->group_name;
+		leader->group_name = NULL;
+
+		new_leader->core.nr_members = leader->core.nr_members - 1;
+		leader->core.nr_members = 1;
+	}
+}
+
+static void unleader_auxtrace(struct perf_session *session)
+{
+	struct evsel *evsel;
+
+	evlist__for_each_entry(session->evlist, evsel) {
+		if (auxtrace__evsel_is_auxtrace(session, evsel) &&
+		    perf_evsel__is_group_leader(evsel)) {
+			unleader_evsel(session->evlist, evsel);
+		}
+	}
+}
+
 int perf_event__process_auxtrace_info(struct perf_session *session,
 				      union perf_event *event)
 {
 	enum auxtrace_type type = event->auxtrace_info.type;
+	int err;
 
 	if (dump_trace)
 		fprintf(stdout, " type: %u\n", type);
 
 	switch (type) {
 	case PERF_AUXTRACE_INTEL_PT:
-		return intel_pt_process_auxtrace_info(event, session);
+		err = intel_pt_process_auxtrace_info(event, session);
+		break;
 	case PERF_AUXTRACE_INTEL_BTS:
-		return intel_bts_process_auxtrace_info(event, session);
+		err = intel_bts_process_auxtrace_info(event, session);
+		break;
 	case PERF_AUXTRACE_ARM_SPE:
-		return arm_spe_process_auxtrace_info(event, session);
+		err = arm_spe_process_auxtrace_info(event, session);
+		break;
 	case PERF_AUXTRACE_CS_ETM:
-		return cs_etm__process_auxtrace_info(event, session);
+		err = cs_etm__process_auxtrace_info(event, session);
+		break;
 	case PERF_AUXTRACE_S390_CPUMSF:
-		return s390_cpumsf_process_auxtrace_info(event, session);
+		err = s390_cpumsf_process_auxtrace_info(event, session);
+		break;
 	case PERF_AUXTRACE_UNKNOWN:
 	default:
 		return -EINVAL;
 	}
+
+	if (err)
+		return err;
+
+	unleader_auxtrace(session);
+
+	return 0;
 }
 
 s64 perf_event__process_auxtrace(struct perf_session *session,
@@ -1412,8 +1443,12 @@ int itrace_parse_synth_opts(const struct option *opt, const char *str,
 			synth_opts->branches = true;
 			synth_opts->returns = true;
 			break;
+		case 'G':
 		case 'g':
-			synth_opts->callchain = true;
+			if (p[-1] == 'G')
+				synth_opts->add_callchain = true;
+			else
+				synth_opts->callchain = true;
 			synth_opts->callchain_sz =
 					PERF_ITRACE_DEFAULT_CALLCHAIN_SZ;
 			while (*p == ' ' || *p == ',')
@@ -2577,3 +2612,12 @@ void auxtrace__free(struct perf_session *session)
 
 	return session->auxtrace->free(session);
 }
+
+bool auxtrace__evsel_is_auxtrace(struct perf_session *session,
+				 struct evsel *evsel)
+{
+	if (!session->auxtrace || !session->auxtrace->evsel_is_auxtrace)
+		return false;
+
+	return session->auxtrace->evsel_is_auxtrace(session, evsel);
+}
diff --git a/tools/perf/util/auxtrace.h b/tools/perf/util/auxtrace.h
index e58ef160b599..dd8a4ff8209e 100644
--- a/tools/perf/util/auxtrace.h
+++ b/tools/perf/util/auxtrace.h
@@ -21,6 +21,7 @@
 union perf_event;
 struct perf_session;
 struct evlist;
+struct evsel;
 struct perf_tool;
 struct mmap;
 struct perf_sample;
@@ -73,6 +74,7 @@ enum itrace_period_type {
  * @calls: limit branch samples to calls (can be combined with @returns)
  * @returns: limit branch samples to returns (can be combined with @calls)
  * @callchain: add callchain to 'instructions' events
+ * @add_callchain: add callchain to existing event records
  * @thread_stack: feed branches to the thread_stack
  * @last_branch: add branch context to 'instruction' events
  * @callchain_sz: maximum callchain size
@@ -100,6 +102,7 @@ struct itrace_synth_opts {
 	bool			calls;
 	bool			returns;
 	bool			callchain;
+	bool			add_callchain;
 	bool			thread_stack;
 	bool			last_branch;
 	unsigned int		callchain_sz;
@@ -166,6 +169,8 @@ struct auxtrace {
 			    struct perf_tool *tool);
 	void (*free_events)(struct perf_session *session);
 	void (*free)(struct perf_session *session);
+	bool (*evsel_is_auxtrace)(struct perf_session *session,
+				  struct evsel *evsel);
 };
 
 /**
@@ -584,6 +589,8 @@ void auxtrace__dump_auxtrace_sample(struct perf_session *session,
 int auxtrace__flush_events(struct perf_session *session, struct perf_tool *tool);
 void auxtrace__free_events(struct perf_session *session);
 void auxtrace__free(struct perf_session *session);
+bool auxtrace__evsel_is_auxtrace(struct perf_session *session,
+				 struct evsel *evsel);
 
 #define ITRACE_HELP \
 "				i:	    		synthesize instructions events\n"		\
@@ -749,6 +756,13 @@ void auxtrace_index__free(struct list_head *head __maybe_unused)
 {
 }
 
+static inline
+bool auxtrace__evsel_is_auxtrace(struct perf_session *session __maybe_unused,
+				 struct evsel *evsel __maybe_unused)
+{
+	return false;
+}
+
 static inline
 int auxtrace_parse_filters(struct evlist *evlist __maybe_unused)
 {
diff --git a/tools/perf/util/bpf-event.c b/tools/perf/util/bpf-event.c
index a3207d900339..0cd41a862952 100644
--- a/tools/perf/util/bpf-event.c
+++ b/tools/perf/util/bpf-event.c
@@ -6,6 +6,9 @@
 #include <bpf/libbpf.h>
 #include <linux/btf.h>
 #include <linux/err.h>
+#include <linux/string.h>
+#include <internal/lib.h>
+#include <symbol/kallsyms.h>
 #include "bpf-event.h"
 #include "debug.h"
 #include "dso.h"
@@ -290,11 +293,82 @@ static int perf_event__synthesize_one_bpf_prog(struct perf_session *session,
 	return err ? -1 : 0;
 }
 
+struct kallsyms_parse {
+	union perf_event	*event;
+	perf_event__handler_t	 process;
+	struct machine		*machine;
+	struct perf_tool	*tool;
+};
+
+static int
+process_bpf_image(char *name, u64 addr, struct kallsyms_parse *data)
+{
+	struct machine *machine = data->machine;
+	union perf_event *event = data->event;
+	struct perf_record_ksymbol *ksymbol;
+	int len;
+
+	ksymbol = &event->ksymbol;
+
+	*ksymbol = (struct perf_record_ksymbol) {
+		.header = {
+			.type = PERF_RECORD_KSYMBOL,
+			.size = offsetof(struct perf_record_ksymbol, name),
+		},
+		.addr      = addr,
+		.len       = page_size,
+		.ksym_type = PERF_RECORD_KSYMBOL_TYPE_BPF,
+		.flags     = 0,
+	};
+
+	len = scnprintf(ksymbol->name, KSYM_NAME_LEN, "%s", name);
+	ksymbol->header.size += PERF_ALIGN(len + 1, sizeof(u64));
+	memset((void *) event + event->header.size, 0, machine->id_hdr_size);
+	event->header.size += machine->id_hdr_size;
+
+	return perf_tool__process_synth_event(data->tool, event, machine,
+					      data->process);
+}
+
+static int
+kallsyms_process_symbol(void *data, const char *_name,
+			char type __maybe_unused, u64 start)
+{
+	char disp[KSYM_NAME_LEN];
+	char *module, *name;
+	unsigned long id;
+	int err = 0;
+
+	module = strchr(_name, '\t');
+	if (!module)
+		return 0;
+
+	/* We are going after [bpf] module ... */
+	if (strcmp(module + 1, "[bpf]"))
+		return 0;
+
+	name = memdup(_name, (module - _name) + 1);
+	if (!name)
+		return -ENOMEM;
+
+	name[module - _name] = 0;
+
+	/* .. and only for trampolines and dispatchers */
+	if ((sscanf(name, "bpf_trampoline_%lu", &id) == 1) ||
+	    (sscanf(name, "bpf_dispatcher_%s", disp) == 1))
+		err = process_bpf_image(name, start, data);
+
+	free(name);
+	return err;
+}
+
 int perf_event__synthesize_bpf_events(struct perf_session *session,
 				      perf_event__handler_t process,
 				      struct machine *machine,
 				      struct record_opts *opts)
 {
+	const char *kallsyms_filename = "/proc/kallsyms";
+	struct kallsyms_parse arg;
 	union perf_event *event;
 	__u32 id = 0;
 	int err;
@@ -303,6 +377,8 @@ int perf_event__synthesize_bpf_events(struct perf_session *session,
 	event = malloc(sizeof(event->bpf) + KSYM_NAME_LEN + machine->id_hdr_size);
 	if (!event)
 		return -1;
+
+	/* Synthesize all the bpf programs in system. */
 	while (true) {
 		err = bpf_prog_get_next_id(id, &id);
 		if (err) {
@@ -335,6 +411,23 @@ int perf_event__synthesize_bpf_events(struct perf_session *session,
 			break;
 		}
 	}
+
+	/* Synthesize all the bpf images - trampolines/dispatchers. */
+	if (symbol_conf.kallsyms_name != NULL)
+		kallsyms_filename = symbol_conf.kallsyms_name;
+
+	arg = (struct kallsyms_parse) {
+		.event   = event,
+		.process = process,
+		.machine = machine,
+		.tool    = session->tool,
+	};
+
+	if (kallsyms__parse(kallsyms_filename, &arg, kallsyms_process_symbol)) {
+		pr_err("%s: failed to synthesize bpf images: %s\n",
+		       __func__, strerror(errno));
+	}
+
 	free(event);
 	return err;
 }
diff --git a/tools/perf/util/branch.h b/tools/perf/util/branch.h
index 154a05cd03af..17b2ccc61094 100644
--- a/tools/perf/util/branch.h
+++ b/tools/perf/util/branch.h
@@ -15,13 +15,18 @@
 #include "event.h"
 
 struct branch_flags {
-	u64 mispred:1;
-	u64 predicted:1;
-	u64 in_tx:1;
-	u64 abort:1;
-	u64 cycles:16;
-	u64 type:4;
-	u64 reserved:40;
+	union {
+		u64 value;
+		struct {
+			u64 mispred:1;
+			u64 predicted:1;
+			u64 in_tx:1;
+			u64 abort:1;
+			u64 cycles:16;
+			u64 type:4;
+			u64 reserved:40;
+		};
+	};
 };
 
 struct branch_info {
@@ -41,7 +46,7 @@ struct branch_entry {
 struct branch_stack {
 	u64			nr;
 	u64			hw_idx;
-	struct branch_entry	entries[0];
+	struct branch_entry	entries[];
 };
 
 /*
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 706bb7bbe1e1..8f668ee29f25 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -143,6 +143,9 @@ struct callchain_cursor_node {
 	u64				ip;
 	struct map_symbol		ms;
 	const char			*srcline;
+	/* Indicate valid cursor node for LBR stitch */
+	bool				valid;
+
 	bool				branch;
 	struct branch_flags		branch_flags;
 	u64				branch_from;
@@ -151,6 +154,11 @@ struct callchain_cursor_node {
 	struct callchain_cursor_node	*next;
 };
 
+struct stitch_list {
+	struct list_head		node;
+	struct callchain_cursor_node	cursor;
+};
+
 struct callchain_cursor {
 	u64				nr;
 	struct callchain_cursor_node	*first;
diff --git a/tools/perf/util/cap.h b/tools/perf/util/cap.h
index 051dc590ceee..ae52878c0b2e 100644
--- a/tools/perf/util/cap.h
+++ b/tools/perf/util/cap.h
@@ -29,4 +29,8 @@ static inline bool perf_cap__capable(int cap __maybe_unused)
 #define CAP_SYSLOG	34
 #endif
 
+#ifndef CAP_PERFMON
+#define CAP_PERFMON	38
+#endif
+
 #endif /* __PERF_CAP_H */
diff --git a/tools/perf/util/cputopo.h b/tools/perf/util/cputopo.h
index 7bf6b811f715..6201c3790d86 100644
--- a/tools/perf/util/cputopo.h
+++ b/tools/perf/util/cputopo.h
@@ -22,7 +22,7 @@ struct numa_topology_node {
 
 struct numa_topology {
 	u32				nr;
-	struct numa_topology_node	nodes[0];
+	struct numa_topology_node	nodes[];
 };
 
 struct cpu_topology *cpu_topology__new(void);
diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 62d2f9b9ce1b..3c802fde4954 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -631,6 +631,16 @@ static void cs_etm__free(struct perf_session *session)
 	zfree(&aux);
 }
 
+static bool cs_etm__evsel_is_auxtrace(struct perf_session *session,
+				      struct evsel *evsel)
+{
+	struct cs_etm_auxtrace *aux = container_of(session->auxtrace,
+						   struct cs_etm_auxtrace,
+						   auxtrace);
+
+	return evsel->core.attr.type == aux->pmu_type;
+}
+
 static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
 {
 	struct machine *machine;
@@ -2618,6 +2628,7 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
 	etm->auxtrace.flush_events = cs_etm__flush_events;
 	etm->auxtrace.free_events = cs_etm__free_events;
 	etm->auxtrace.free = cs_etm__free;
+	etm->auxtrace.evsel_is_auxtrace = cs_etm__evsel_is_auxtrace;
 	session->auxtrace = &etm->auxtrace;
 
 	etm->unknown_thread = thread__new(999999999, 999999999);
diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c
index 91f21239608b..f338990e0fe6 100644
--- a/tools/perf/util/dso.c
+++ b/tools/perf/util/dso.c
@@ -191,6 +191,7 @@ int dso__read_binary_type_filename(const struct dso *dso,
 	case DSO_BINARY_TYPE__GUEST_KALLSYMS:
 	case DSO_BINARY_TYPE__JAVA_JIT:
 	case DSO_BINARY_TYPE__BPF_PROG_INFO:
+	case DSO_BINARY_TYPE__BPF_IMAGE:
 	case DSO_BINARY_TYPE__NOT_FOUND:
 		ret = -1;
 		break;
diff --git a/tools/perf/util/dso.h b/tools/perf/util/dso.h
index 2db64b79617a..e3e9e3b77297 100644
--- a/tools/perf/util/dso.h
+++ b/tools/perf/util/dso.h
@@ -40,6 +40,7 @@ enum dso_binary_type {
 	DSO_BINARY_TYPE__GUEST_KCORE,
 	DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO,
 	DSO_BINARY_TYPE__BPF_PROG_INFO,
+	DSO_BINARY_TYPE__BPF_IMAGE,
 	DSO_BINARY_TYPE__NOT_FOUND,
 };
 
@@ -136,7 +137,7 @@ struct dso_cache {
 	struct rb_node	rb_node;
 	u64 offset;
 	u64 size;
-	char data[0];
+	char data[];
 };
 
 struct auxtrace_cache;
@@ -208,7 +209,7 @@ struct dso {
 	struct nsinfo	*nsinfo;
 	struct dso_id	 id;
 	refcount_t	 refcnt;
-	char		 name[0];
+	char		 name[];
 };
 
 /* dso__for_each_symbol - iterate over the symbols of given type
diff --git a/tools/perf/util/env.h b/tools/perf/util/env.h
index 7632075a8792..1ab2682d5d2b 100644
--- a/tools/perf/util/env.h
+++ b/tools/perf/util/env.h
@@ -48,6 +48,7 @@ struct perf_env {
 	char			*cpuid;
 	unsigned long long	total_mem;
 	unsigned int		msr_pmu_type;
+	unsigned int		max_branches;
 
 	int			nr_cmdline;
 	int			nr_sibling_cores;
@@ -57,12 +58,14 @@ struct perf_env {
 	int			nr_memory_nodes;
 	int			nr_pmu_mappings;
 	int			nr_groups;
+	int			nr_cpu_pmu_caps;
 	char			*cmdline;
 	const char		**cmdline_argv;
 	char			*sibling_cores;
 	char			*sibling_dies;
 	char			*sibling_threads;
 	char			*pmu_mappings;
+	char			*cpu_pmu_caps;
 	struct cpu_topology_map	*cpu;
 	struct cpu_cache_level	*caches;
 	int			 caches_cnt;
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index b8289f160f07..6ae01c3c2ffa 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -79,7 +79,7 @@ struct sample_read {
 
 struct ip_callchain {
 	u64 nr;
-	u64 ips[0];
+	u64 ips[];
 };
 
 struct branch_stack;
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 1548237b6558..82d9f9bb8975 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -1131,8 +1131,10 @@ bool perf_evlist__valid_read_format(struct evlist *evlist)
 	u64 sample_type = first->core.attr.sample_type;
 
 	evlist__for_each_entry(evlist, pos) {
-		if (read_format != pos->core.attr.read_format)
-			return false;
+		if (read_format != pos->core.attr.read_format) {
+			pr_debug("Read format differs %#" PRIx64 " vs %#" PRIx64 "\n",
+				 read_format, (u64)pos->core.attr.read_format);
+		}
 	}
 
 	/* PERF_SAMPLE_READ imples PERF_FORMAT_ID. */
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index eb880efbce16..6a571d322bb2 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -1002,25 +1002,6 @@ void perf_evsel__config(struct evsel *evsel, struct record_opts *opts,
 		}
 	}
 
-	/*
-	 * Disable sampling for all group members other
-	 * than leader in case leader 'leads' the sampling.
-	 */
-	if ((leader != evsel) && leader->sample_read) {
-		attr->freq           = 0;
-		attr->sample_freq    = 0;
-		attr->sample_period  = 0;
-		attr->write_backward = 0;
-
-		/*
-		 * We don't get sample for slave events, we make them
-		 * when delivering group leader sample. Set the slave
-		 * event to follow the master sample_type to ease up
-		 * report.
-		 */
-		attr->sample_type = leader->core.attr.sample_type;
-	}
-
 	if (opts->no_samples)
 		attr->sample_freq = 0;
 
@@ -2136,7 +2117,7 @@ int perf_evsel__parse_sample(struct evsel *evsel, union perf_event *event,
 		}
 	}
 
-	if (evsel__has_callchain(evsel)) {
+	if (type & PERF_SAMPLE_CALLCHAIN) {
 		const u64 max_callchain_nr = UINT64_MAX / sizeof(u64);
 
 		OVERFLOW_CHECK_u64(array);
@@ -2446,6 +2427,10 @@ bool perf_evsel__fallback(struct evsel *evsel, int err,
 		char *new_name;
 		const char *sep = ":";
 
+		/* If event has exclude user then don't exclude kernel. */
+		if (evsel->core.attr.exclude_user)
+			return false;
+
 		/* Is there already the separator in the name. */
 		if (strchr(name, '/') ||
 		    strchr(name, ':'))
@@ -2523,14 +2508,14 @@ int perf_evsel__open_strerror(struct evsel *evsel, struct target *target,
 		 "You may not have permission to collect %sstats.\n\n"
 		 "Consider tweaking /proc/sys/kernel/perf_event_paranoid,\n"
 		 "which controls use of the performance events system by\n"
-		 "unprivileged users (without CAP_SYS_ADMIN).\n\n"
+		 "unprivileged users (without CAP_PERFMON or CAP_SYS_ADMIN).\n\n"
 		 "The current value is %d:\n\n"
 		 "  -1: Allow use of (almost) all events by all users\n"
 		 "      Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK\n"
-		 ">= 0: Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN\n"
-		 "      Disallow raw tracepoint access by users without CAP_SYS_ADMIN\n"
-		 ">= 1: Disallow CPU event access by users without CAP_SYS_ADMIN\n"
-		 ">= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN\n\n"
+		 ">= 0: Disallow ftrace function tracepoint by users without CAP_PERFMON or CAP_SYS_ADMIN\n"
+		 "      Disallow raw tracepoint access by users without CAP_SYS_PERFMON or CAP_SYS_ADMIN\n"
+		 ">= 1: Disallow CPU event access by users without CAP_PERFMON or CAP_SYS_ADMIN\n"
+		 ">= 2: Disallow kernel profiling by users without CAP_PERFMON or CAP_SYS_ADMIN\n\n"
 		 "To make this setting permanent, edit /etc/sysctl.conf too, e.g.:\n\n"
 		 "	kernel.perf_event_paranoid = -1\n" ,
 				 target->system_wide ? "system-wide " : "",
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 53187c501ee8..a463bc65b001 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -104,6 +104,14 @@ struct evsel {
 		perf_evsel__sb_cb_t	*cb;
 		void			*data;
 	} side_band;
+	/*
+	 * For reporting purposes, an evsel sample can have a callchain
+	 * synthesized from AUX area data. Keep track of synthesized sample
+	 * types here. Note, the recorded sample_type cannot be changed because
+	 * it is needed to continue to parse events.
+	 * See also evsel__has_callchain().
+	 */
+	__u64			synth_sample_type;
 };
 
 struct perf_missing_features {
@@ -150,6 +158,9 @@ int perf_evsel__object_config(size_t object_size,
 			      int (*init)(struct evsel *evsel),
 			      void (*fini)(struct evsel *evsel));
 
+struct perf_pmu *perf_evsel__find_pmu(struct evsel *evsel);
+bool perf_evsel__is_aux_event(struct evsel *evsel);
+
 struct evsel *perf_evsel__new_idx(struct perf_event_attr *attr, int idx);
 
 static inline struct evsel *evsel__new(struct perf_event_attr *attr)
@@ -398,7 +409,12 @@ static inline bool perf_evsel__has_branch_hw_idx(const struct evsel *evsel)
 
 static inline bool evsel__has_callchain(const struct evsel *evsel)
 {
-	return (evsel->core.attr.sample_type & PERF_SAMPLE_CALLCHAIN) != 0;
+	/*
+	 * For reporting purposes, an evsel sample can have a recorded callchain
+	 * or a callchain synthesized from AUX area data.
+	 */
+	return evsel->core.attr.sample_type & PERF_SAMPLE_CALLCHAIN ||
+	       evsel->synth_sample_type & PERF_SAMPLE_CALLCHAIN;
 }
 
 struct perf_env *perf_evsel__env(struct evsel *evsel);
diff --git a/tools/perf/util/expr.c b/tools/perf/util/expr.c
index fd192ddf93c1..c3382d58cf40 100644
--- a/tools/perf/util/expr.c
+++ b/tools/perf/util/expr.c
@@ -3,7 +3,6 @@
 #include <assert.h>
 #include "expr.h"
 #include "expr-bison.h"
-#define YY_EXTRA_TYPE int
 #include "expr-flex.h"
 
 #ifdef PARSER_DEBUG
@@ -11,7 +10,7 @@ extern int expr_debug;
 #endif
 
 /* Caller must make sure id is allocated */
-void expr__add_id(struct parse_ctx *ctx, const char *name, double val)
+void expr__add_id(struct expr_parse_ctx *ctx, const char *name, double val)
 {
 	int idx;
 
@@ -21,20 +20,23 @@ void expr__add_id(struct parse_ctx *ctx, const char *name, double val)
 	ctx->ids[idx].val = val;
 }
 
-void expr__ctx_init(struct parse_ctx *ctx)
+void expr__ctx_init(struct expr_parse_ctx *ctx)
 {
 	ctx->num_ids = 0;
 }
 
 static int
-__expr__parse(double *val, struct parse_ctx *ctx, const char *expr,
+__expr__parse(double *val, struct expr_parse_ctx *ctx, const char *expr,
 	      int start)
 {
+	struct expr_scanner_ctx scanner_ctx = {
+		.start_token = start,
+	};
 	YY_BUFFER_STATE buffer;
 	void *scanner;
 	int ret;
 
-	ret = expr_lex_init_extra(start, &scanner);
+	ret = expr_lex_init_extra(&scanner_ctx, &scanner);
 	if (ret)
 		return ret;
 
@@ -52,7 +54,7 @@ __expr__parse(double *val, struct parse_ctx *ctx, const char *expr,
 	return ret;
 }
 
-int expr__parse(double *final_val, struct parse_ctx *ctx, const char *expr)
+int expr__parse(double *final_val, struct expr_parse_ctx *ctx, const char *expr)
 {
 	return __expr__parse(final_val, ctx, expr, EXPR_PARSE) ? -1 : 0;
 }
@@ -75,7 +77,7 @@ int expr__find_other(const char *expr, const char *one, const char ***other,
 		     int *num_other)
 {
 	int err, i = 0, j = 0;
-	struct parse_ctx ctx;
+	struct expr_parse_ctx ctx;
 
 	expr__ctx_init(&ctx);
 	err = __expr__parse(NULL, &ctx, expr, EXPR_OTHER);
diff --git a/tools/perf/util/expr.h b/tools/perf/util/expr.h
index 9377538f4097..0938ad166ece 100644
--- a/tools/perf/util/expr.h
+++ b/tools/perf/util/expr.h
@@ -5,19 +5,23 @@
 #define EXPR_MAX_OTHER 20
 #define MAX_PARSE_ID EXPR_MAX_OTHER
 
-struct parse_id {
+struct expr_parse_id {
 	const char *name;
 	double val;
 };
 
-struct parse_ctx {
+struct expr_parse_ctx {
 	int num_ids;
-	struct parse_id ids[MAX_PARSE_ID];
+	struct expr_parse_id ids[MAX_PARSE_ID];
 };
 
-void expr__ctx_init(struct parse_ctx *ctx);
-void expr__add_id(struct parse_ctx *ctx, const char *id, double val);
-int expr__parse(double *final_val, struct parse_ctx *ctx, const char *expr);
+struct expr_scanner_ctx {
+	int start_token;
+};
+
+void expr__ctx_init(struct expr_parse_ctx *ctx);
+void expr__add_id(struct expr_parse_ctx *ctx, const char *id, double val);
+int expr__parse(double *final_val, struct expr_parse_ctx *ctx, const char *expr);
 int expr__find_other(const char *expr, const char *one, const char ***other,
 		int *num_other);
 
diff --git a/tools/perf/util/expr.l b/tools/perf/util/expr.l
index eaad29243c23..2582c2464938 100644
--- a/tools/perf/util/expr.l
+++ b/tools/perf/util/expr.l
@@ -76,13 +76,13 @@ sym		[0-9a-zA-Z_\.:@]+
 symbol		{spec}*{sym}*{spec}*{sym}*
 
 %%
-	{
-		int start_token;
+	struct expr_scanner_ctx *sctx = expr_get_extra(yyscanner);
 
-		start_token = expr_get_extra(yyscanner);
+	{
+		int start_token = sctx->start_token;
 
-		if (start_token) {
-			expr_set_extra(NULL, yyscanner);
+		if (sctx->start_token) {
+			sctx->start_token = 0;
 			return start_token;
 		}
 	}
diff --git a/tools/perf/util/expr.y b/tools/perf/util/expr.y
index 4720cbe79357..cd17486c1c5d 100644
--- a/tools/perf/util/expr.y
+++ b/tools/perf/util/expr.y
@@ -15,7 +15,7 @@
 %define api.pure full
 
 %parse-param { double *final_val }
-%parse-param { struct parse_ctx *ctx }
+%parse-param { struct expr_parse_ctx *ctx }
 %parse-param {void *scanner}
 %lex-param {void* scanner}
 
@@ -39,14 +39,14 @@
 
 %{
 static void expr_error(double *final_val __maybe_unused,
-		       struct parse_ctx *ctx __maybe_unused,
+		       struct expr_parse_ctx *ctx __maybe_unused,
 		       void *scanner,
 		       const char *s)
 {
 	pr_debug("%s\n", s);
 }
 
-static int lookup_id(struct parse_ctx *ctx, char *id, double *val)
+static int lookup_id(struct expr_parse_ctx *ctx, char *id, double *val)
 {
 	int i;
 
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index acbd046bf95c..28e82da04b7a 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -1395,6 +1395,38 @@ static int write_compressed(struct feat_fd *ff __maybe_unused,
 	return do_write(ff, &(ff->ph->env.comp_mmap_len), sizeof(ff->ph->env.comp_mmap_len));
 }
 
+static int write_cpu_pmu_caps(struct feat_fd *ff,
+			      struct evlist *evlist __maybe_unused)
+{
+	struct perf_pmu *cpu_pmu = perf_pmu__find("cpu");
+	struct perf_pmu_caps *caps = NULL;
+	int nr_caps;
+	int ret;
+
+	if (!cpu_pmu)
+		return -ENOENT;
+
+	nr_caps = perf_pmu__caps_parse(cpu_pmu);
+	if (nr_caps < 0)
+		return nr_caps;
+
+	ret = do_write(ff, &nr_caps, sizeof(nr_caps));
+	if (ret < 0)
+		return ret;
+
+	list_for_each_entry(caps, &cpu_pmu->caps, list) {
+		ret = do_write_string(ff, caps->name);
+		if (ret < 0)
+			return ret;
+
+		ret = do_write_string(ff, caps->value);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
 static void print_hostname(struct feat_fd *ff, FILE *fp)
 {
 	fprintf(fp, "# hostname : %s\n", ff->ph->env.hostname);
@@ -1809,6 +1841,27 @@ static void print_compressed(struct feat_fd *ff, FILE *fp)
 		ff->ph->env.comp_level, ff->ph->env.comp_ratio);
 }
 
+static void print_cpu_pmu_caps(struct feat_fd *ff, FILE *fp)
+{
+	const char *delimiter = "# cpu pmu capabilities: ";
+	u32 nr_caps = ff->ph->env.nr_cpu_pmu_caps;
+	char *str;
+
+	if (!nr_caps) {
+		fprintf(fp, "# cpu pmu capabilities: not available\n");
+		return;
+	}
+
+	str = ff->ph->env.cpu_pmu_caps;
+	while (nr_caps--) {
+		fprintf(fp, "%s%s", delimiter, str);
+		delimiter = ", ";
+		str += strlen(str) + 1;
+	}
+
+	fprintf(fp, "\n");
+}
+
 static void print_pmu_mappings(struct feat_fd *ff, FILE *fp)
 {
 	const char *delimiter = "# pmu mappings: ";
@@ -2846,6 +2899,60 @@ static int process_compressed(struct feat_fd *ff,
 	return 0;
 }
 
+static int process_cpu_pmu_caps(struct feat_fd *ff,
+				void *data __maybe_unused)
+{
+	char *name, *value;
+	struct strbuf sb;
+	u32 nr_caps;
+
+	if (do_read_u32(ff, &nr_caps))
+		return -1;
+
+	if (!nr_caps) {
+		pr_debug("cpu pmu capabilities not available\n");
+		return 0;
+	}
+
+	ff->ph->env.nr_cpu_pmu_caps = nr_caps;
+
+	if (strbuf_init(&sb, 128) < 0)
+		return -1;
+
+	while (nr_caps--) {
+		name = do_read_string(ff);
+		if (!name)
+			goto error;
+
+		value = do_read_string(ff);
+		if (!value)
+			goto free_name;
+
+		if (strbuf_addf(&sb, "%s=%s", name, value) < 0)
+			goto free_value;
+
+		/* include a NULL character at the end */
+		if (strbuf_add(&sb, "", 1) < 0)
+			goto free_value;
+
+		if (!strcmp(name, "branches"))
+			ff->ph->env.max_branches = atoi(value);
+
+		free(value);
+		free(name);
+	}
+	ff->ph->env.cpu_pmu_caps = strbuf_detach(&sb, NULL);
+	return 0;
+
+free_value:
+	free(value);
+free_name:
+	free(name);
+error:
+	strbuf_release(&sb);
+	return -1;
+}
+
 #define FEAT_OPR(n, func, __full_only) \
 	[HEADER_##n] = {					\
 		.name	    = __stringify(n),			\
@@ -2903,6 +3010,7 @@ const struct perf_header_feature_ops feat_ops[HEADER_LAST_FEATURE] = {
 	FEAT_OPR(BPF_PROG_INFO, bpf_prog_info,  false),
 	FEAT_OPR(BPF_BTF,       bpf_btf,        false),
 	FEAT_OPR(COMPRESSED,	compressed,	false),
+	FEAT_OPR(CPU_PMU_CAPS,	cpu_pmu_caps,	false),
 };
 
 struct header_print_data {
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
index 840f95cee349..650bd1c7a99b 100644
--- a/tools/perf/util/header.h
+++ b/tools/perf/util/header.h
@@ -43,6 +43,7 @@ enum {
 	HEADER_BPF_PROG_INFO,
 	HEADER_BPF_BTF,
 	HEADER_COMPRESSED,
+	HEADER_CPU_PMU_CAPS,
 	HEADER_LAST_FEATURE,
 	HEADER_FEAT_BITS	= 256,
 };
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 283a69ff6a3d..c2550dbe7dc3 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -1070,6 +1070,20 @@ iter_next_cumulative_entry(struct hist_entry_iter *iter,
 	return fill_callchain_info(al, node, iter->hide_unresolved);
 }
 
+static bool
+hist_entry__fast__sym_diff(struct hist_entry *left,
+			   struct hist_entry *right)
+{
+	struct symbol *sym_l = left->ms.sym;
+	struct symbol *sym_r = right->ms.sym;
+
+	if (!sym_l && !sym_r)
+		return left->ip != right->ip;
+
+	return !!_sort__sym_cmp(sym_l, sym_r);
+}
+
+
 static int
 iter_add_next_cumulative_entry(struct hist_entry_iter *iter,
 			       struct addr_location *al)
@@ -1096,6 +1110,7 @@ iter_add_next_cumulative_entry(struct hist_entry_iter *iter,
 	};
 	int i;
 	struct callchain_cursor cursor;
+	bool fast = hists__has(he_tmp.hists, sym);
 
 	callchain_cursor_snapshot(&cursor, &callchain_cursor);
 
@@ -1106,6 +1121,14 @@ iter_add_next_cumulative_entry(struct hist_entry_iter *iter,
 	 * It's possible that it has cycles or recursive calls.
 	 */
 	for (i = 0; i < iter->curr; i++) {
+		/*
+		 * For most cases, there are no duplicate entries in callchain.
+		 * The symbols are usually different. Do a quick check for
+		 * symbols first.
+		 */
+		if (fast && hist_entry__fast__sym_diff(he_cache[i], &he_tmp))
+			continue;
+
 		if (hist_entry__cmp(he_cache[i], &he_tmp) == 0) {
 			/* to avoid calling callback function */
 			iter->he = NULL;
diff --git a/tools/perf/util/intel-bts.c b/tools/perf/util/intel-bts.c
index 34cb380d19a3..059e1c805ed0 100644
--- a/tools/perf/util/intel-bts.c
+++ b/tools/perf/util/intel-bts.c
@@ -728,6 +728,15 @@ static void intel_bts_free(struct perf_session *session)
 	free(bts);
 }
 
+static bool intel_bts_evsel_is_auxtrace(struct perf_session *session,
+					struct evsel *evsel)
+{
+	struct intel_bts *bts = container_of(session->auxtrace, struct intel_bts,
+					     auxtrace);
+
+	return evsel->core.attr.type == bts->pmu_type;
+}
+
 struct intel_bts_synth {
 	struct perf_tool dummy_tool;
 	struct perf_session *session;
@@ -883,6 +892,7 @@ int intel_bts_process_auxtrace_info(union perf_event *event,
 	bts->auxtrace.flush_events = intel_bts_flush;
 	bts->auxtrace.free_events = intel_bts_free_events;
 	bts->auxtrace.free = intel_bts_free;
+	bts->auxtrace.evsel_is_auxtrace = intel_bts_evsel_is_auxtrace;
 	session->auxtrace = &bts->auxtrace;
 
 	intel_bts_print_info(&auxtrace_info->priv[0], INTEL_BTS_PMU_TYPE,
diff --git a/tools/perf/util/intel-pt.c b/tools/perf/util/intel-pt.c
index 23c8289c2472..4be7634dccf5 100644
--- a/tools/perf/util/intel-pt.c
+++ b/tools/perf/util/intel-pt.c
@@ -124,6 +124,8 @@ struct intel_pt {
 
 	struct range *time_ranges;
 	unsigned int range_cnt;
+
+	struct ip_callchain *chain;
 };
 
 enum switch_state {
@@ -868,6 +870,45 @@ static u64 intel_pt_ns_to_ticks(const struct intel_pt *pt, u64 ns)
 		pt->tc.time_mult;
 }
 
+static struct ip_callchain *intel_pt_alloc_chain(struct intel_pt *pt)
+{
+	size_t sz = sizeof(struct ip_callchain);
+
+	/* Add 1 to callchain_sz for callchain context */
+	sz += (pt->synth_opts.callchain_sz + 1) * sizeof(u64);
+	return zalloc(sz);
+}
+
+static int intel_pt_callchain_init(struct intel_pt *pt)
+{
+	struct evsel *evsel;
+
+	evlist__for_each_entry(pt->session->evlist, evsel) {
+		if (!(evsel->core.attr.sample_type & PERF_SAMPLE_CALLCHAIN))
+			evsel->synth_sample_type |= PERF_SAMPLE_CALLCHAIN;
+	}
+
+	pt->chain = intel_pt_alloc_chain(pt);
+	if (!pt->chain)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void intel_pt_add_callchain(struct intel_pt *pt,
+				   struct perf_sample *sample)
+{
+	struct thread *thread = machine__findnew_thread(pt->machine,
+							sample->pid,
+							sample->tid);
+
+	thread_stack__sample_late(thread, sample->cpu, pt->chain,
+				  pt->synth_opts.callchain_sz + 1, sample->ip,
+				  pt->kernel_start);
+
+	sample->callchain = pt->chain;
+}
+
 static struct intel_pt_queue *intel_pt_alloc_queue(struct intel_pt *pt,
 						   unsigned int queue_nr)
 {
@@ -880,11 +921,7 @@ static struct intel_pt_queue *intel_pt_alloc_queue(struct intel_pt *pt,
 		return NULL;
 
 	if (pt->synth_opts.callchain) {
-		size_t sz = sizeof(struct ip_callchain);
-
-		/* Add 1 to callchain_sz for callchain context */
-		sz += (pt->synth_opts.callchain_sz + 1) * sizeof(u64);
-		ptq->chain = zalloc(sz);
+		ptq->chain = intel_pt_alloc_chain(pt);
 		if (!ptq->chain)
 			goto out_free;
 	}
@@ -1680,15 +1717,14 @@ static u64 intel_pt_lbr_flags(u64 info)
 	union {
 		struct branch_flags flags;
 		u64 result;
-	} u = {
-		.flags = {
-			.mispred	= !!(info & LBR_INFO_MISPRED),
-			.predicted	= !(info & LBR_INFO_MISPRED),
-			.in_tx		= !!(info & LBR_INFO_IN_TX),
-			.abort		= !!(info & LBR_INFO_ABORT),
-			.cycles		= info & LBR_INFO_CYCLES,
-		}
-	};
+	} u;
+
+	u.result	  = 0;
+	u.flags.mispred	  = !!(info & LBR_INFO_MISPRED);
+	u.flags.predicted = !(info & LBR_INFO_MISPRED);
+	u.flags.in_tx	  = !!(info & LBR_INFO_IN_TX);
+	u.flags.abort	  = !!(info & LBR_INFO_ABORT);
+	u.flags.cycles	  = info & LBR_INFO_CYCLES;
 
 	return u.result;
 }
@@ -1992,7 +2028,8 @@ static int intel_pt_sample(struct intel_pt_queue *ptq)
 	if (!(state->type & INTEL_PT_BRANCH))
 		return 0;
 
-	if (pt->synth_opts.callchain || pt->synth_opts.thread_stack)
+	if (pt->synth_opts.callchain || pt->synth_opts.add_callchain ||
+	    pt->synth_opts.thread_stack)
 		thread_stack__event(ptq->thread, ptq->cpu, ptq->flags, state->from_ip,
 				    state->to_ip, ptq->insn_len,
 				    state->trace_nr);
@@ -2639,6 +2676,11 @@ static int intel_pt_process_event(struct perf_session *session,
 	if (err)
 		return err;
 
+	if (event->header.type == PERF_RECORD_SAMPLE) {
+		if (pt->synth_opts.add_callchain && !sample->callchain)
+			intel_pt_add_callchain(pt, sample);
+	}
+
 	if (event->header.type == PERF_RECORD_AUX &&
 	    (event->aux.flags & PERF_AUX_FLAG_TRUNCATED) &&
 	    pt->synth_opts.errors) {
@@ -2710,11 +2752,21 @@ static void intel_pt_free(struct perf_session *session)
 	session->auxtrace = NULL;
 	thread__put(pt->unknown_thread);
 	addr_filters__exit(&pt->filts);
+	zfree(&pt->chain);
 	zfree(&pt->filter);
 	zfree(&pt->time_ranges);
 	free(pt);
 }
 
+static bool intel_pt_evsel_is_auxtrace(struct perf_session *session,
+				       struct evsel *evsel)
+{
+	struct intel_pt *pt = container_of(session->auxtrace, struct intel_pt,
+					   auxtrace);
+
+	return evsel->core.attr.type == pt->pmu_type;
+}
+
 static int intel_pt_process_auxtrace_event(struct perf_session *session,
 					   union perf_event *event,
 					   struct perf_tool *tool __maybe_unused)
@@ -3310,6 +3362,7 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 	pt->auxtrace.flush_events = intel_pt_flush;
 	pt->auxtrace.free_events = intel_pt_free_events;
 	pt->auxtrace.free = intel_pt_free;
+	pt->auxtrace.evsel_is_auxtrace = intel_pt_evsel_is_auxtrace;
 	session->auxtrace = &pt->auxtrace;
 
 	if (dump_trace)
@@ -3338,6 +3391,7 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 		    !session->itrace_synth_opts->inject) {
 			pt->synth_opts.branches = false;
 			pt->synth_opts.callchain = true;
+			pt->synth_opts.add_callchain = true;
 		}
 		pt->synth_opts.thread_stack =
 				session->itrace_synth_opts->thread_stack;
@@ -3370,14 +3424,22 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 		pt->branches_filter |= PERF_IP_FLAG_RETURN |
 				       PERF_IP_FLAG_TRACE_BEGIN;
 
-	if (pt->synth_opts.callchain && !symbol_conf.use_callchain) {
+	if ((pt->synth_opts.callchain || pt->synth_opts.add_callchain) &&
+	    !symbol_conf.use_callchain) {
 		symbol_conf.use_callchain = true;
 		if (callchain_register_param(&callchain_param) < 0) {
 			symbol_conf.use_callchain = false;
 			pt->synth_opts.callchain = false;
+			pt->synth_opts.add_callchain = false;
 		}
 	}
 
+	if (pt->synth_opts.add_callchain) {
+		err = intel_pt_callchain_init(pt);
+		if (err)
+			goto err_delete_thread;
+	}
+
 	err = intel_pt_synth_events(pt, session);
 	if (err)
 		goto err_delete_thread;
@@ -3400,6 +3462,7 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 	return 0;
 
 err_delete_thread:
+	zfree(&pt->chain);
 	thread__zput(pt->unknown_thread);
 err_free_queues:
 	intel_pt_log_disable();
diff --git a/tools/perf/util/jitdump.c b/tools/perf/util/jitdump.c
index e3ccb0ce1938..32bb05e03fb2 100644
--- a/tools/perf/util/jitdump.c
+++ b/tools/perf/util/jitdump.c
@@ -57,7 +57,7 @@ struct debug_line_info {
 	unsigned long vma;
 	unsigned int lineno;
 	/* The filename format is unspecified, absolute path, relative etc. */
-	char const filename[0];
+	char const filename[];
 };
 
 struct jit_tool {
diff --git a/tools/perf/util/jitdump.h b/tools/perf/util/jitdump.h
index f2c3823cc81a..ab2842def83d 100644
--- a/tools/perf/util/jitdump.h
+++ b/tools/perf/util/jitdump.h
@@ -93,7 +93,7 @@ struct debug_entry {
 	uint64_t addr;
 	int lineno;	    /* source line number starting at 1 */
 	int discrim;	    /* column discriminator, 0 is default */
-	const char name[0]; /* null terminated filename, \xff\0 if same as previous entry */
+	const char name[]; /* null terminated filename, \xff\0 if same as previous entry */
 };
 
 struct jr_code_debug_info {
@@ -101,7 +101,7 @@ struct jr_code_debug_info {
 
 	uint64_t code_addr;
 	uint64_t nr_entry;
-	struct debug_entry entries[0];
+	struct debug_entry entries[];
 };
 
 struct jr_code_unwinding_info {
@@ -110,7 +110,7 @@ struct jr_code_unwinding_info {
 	uint64_t unwinding_size;
 	uint64_t eh_frame_hdr_size;
 	uint64_t mapped_size;
-	const char unwinding_data[0];
+	const char unwinding_data[];
 };
 
 union jr_entry {
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 97142e9671be..5ac32cabe4e6 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -736,6 +736,12 @@ int machine__process_switch_event(struct machine *machine __maybe_unused,
 	return 0;
 }
 
+static int is_bpf_image(const char *name)
+{
+	return strncmp(name, "bpf_trampoline_", sizeof("bpf_trampoline_") - 1) ||
+	       strncmp(name, "bpf_dispatcher_", sizeof("bpf_dispatcher_") - 1);
+}
+
 static int machine__process_ksymbol_register(struct machine *machine,
 					     union perf_event *event,
 					     struct perf_sample *sample __maybe_unused)
@@ -759,6 +765,12 @@ static int machine__process_ksymbol_register(struct machine *machine,
 		map->start = event->ksymbol.addr;
 		map->end = map->start + event->ksymbol.len;
 		maps__insert(&machine->kmaps, map);
+		dso__set_loaded(dso);
+
+		if (is_bpf_image(event->ksymbol.name)) {
+			dso->binary_type = DSO_BINARY_TYPE__BPF_IMAGE;
+			dso__set_long_name(dso, "", false);
+		}
 	}
 
 	sym = symbol__new(map->map_ip(map, map->start),
@@ -2178,6 +2190,303 @@ static int remove_loops(struct branch_entry *l, int nr,
 	return nr;
 }
 
+static int lbr_callchain_add_kernel_ip(struct thread *thread,
+				       struct callchain_cursor *cursor,
+				       struct perf_sample *sample,
+				       struct symbol **parent,
+				       struct addr_location *root_al,
+				       u64 branch_from,
+				       bool callee, int end)
+{
+	struct ip_callchain *chain = sample->callchain;
+	u8 cpumode = PERF_RECORD_MISC_USER;
+	int err, i;
+
+	if (callee) {
+		for (i = 0; i < end + 1; i++) {
+			err = add_callchain_ip(thread, cursor, parent,
+					       root_al, &cpumode, chain->ips[i],
+					       false, NULL, NULL, branch_from);
+			if (err)
+				return err;
+		}
+		return 0;
+	}
+
+	for (i = end; i >= 0; i--) {
+		err = add_callchain_ip(thread, cursor, parent,
+				       root_al, &cpumode, chain->ips[i],
+				       false, NULL, NULL, branch_from);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static void save_lbr_cursor_node(struct thread *thread,
+				 struct callchain_cursor *cursor,
+				 int idx)
+{
+	struct lbr_stitch *lbr_stitch = thread->lbr_stitch;
+
+	if (!lbr_stitch)
+		return;
+
+	if (cursor->pos == cursor->nr) {
+		lbr_stitch->prev_lbr_cursor[idx].valid = false;
+		return;
+	}
+
+	if (!cursor->curr)
+		cursor->curr = cursor->first;
+	else
+		cursor->curr = cursor->curr->next;
+	memcpy(&lbr_stitch->prev_lbr_cursor[idx], cursor->curr,
+	       sizeof(struct callchain_cursor_node));
+
+	lbr_stitch->prev_lbr_cursor[idx].valid = true;
+	cursor->pos++;
+}
+
+static int lbr_callchain_add_lbr_ip(struct thread *thread,
+				    struct callchain_cursor *cursor,
+				    struct perf_sample *sample,
+				    struct symbol **parent,
+				    struct addr_location *root_al,
+				    u64 *branch_from,
+				    bool callee)
+{
+	struct branch_stack *lbr_stack = sample->branch_stack;
+	struct branch_entry *entries = perf_sample__branch_entries(sample);
+	u8 cpumode = PERF_RECORD_MISC_USER;
+	int lbr_nr = lbr_stack->nr;
+	struct branch_flags *flags;
+	int err, i;
+	u64 ip;
+
+	/*
+	 * The curr and pos are not used in writing session. They are cleared
+	 * in callchain_cursor_commit() when the writing session is closed.
+	 * Using curr and pos to track the current cursor node.
+	 */
+	if (thread->lbr_stitch) {
+		cursor->curr = NULL;
+		cursor->pos = cursor->nr;
+		if (cursor->nr) {
+			cursor->curr = cursor->first;
+			for (i = 0; i < (int)(cursor->nr - 1); i++)
+				cursor->curr = cursor->curr->next;
+		}
+	}
+
+	if (callee) {
+		/* Add LBR ip from first entries.to */
+		ip = entries[0].to;
+		flags = &entries[0].flags;
+		*branch_from = entries[0].from;
+		err = add_callchain_ip(thread, cursor, parent,
+				       root_al, &cpumode, ip,
+				       true, flags, NULL,
+				       *branch_from);
+		if (err)
+			return err;
+
+		/*
+		 * The number of cursor node increases.
+		 * Move the current cursor node.
+		 * But does not need to save current cursor node for entry 0.
+		 * It's impossible to stitch the whole LBRs of previous sample.
+		 */
+		if (thread->lbr_stitch && (cursor->pos != cursor->nr)) {
+			if (!cursor->curr)
+				cursor->curr = cursor->first;
+			else
+				cursor->curr = cursor->curr->next;
+			cursor->pos++;
+		}
+
+		/* Add LBR ip from entries.from one by one. */
+		for (i = 0; i < lbr_nr; i++) {
+			ip = entries[i].from;
+			flags = &entries[i].flags;
+			err = add_callchain_ip(thread, cursor, parent,
+					       root_al, &cpumode, ip,
+					       true, flags, NULL,
+					       *branch_from);
+			if (err)
+				return err;
+			save_lbr_cursor_node(thread, cursor, i);
+		}
+		return 0;
+	}
+
+	/* Add LBR ip from entries.from one by one. */
+	for (i = lbr_nr - 1; i >= 0; i--) {
+		ip = entries[i].from;
+		flags = &entries[i].flags;
+		err = add_callchain_ip(thread, cursor, parent,
+				       root_al, &cpumode, ip,
+				       true, flags, NULL,
+				       *branch_from);
+		if (err)
+			return err;
+		save_lbr_cursor_node(thread, cursor, i);
+	}
+
+	/* Add LBR ip from first entries.to */
+	ip = entries[0].to;
+	flags = &entries[0].flags;
+	*branch_from = entries[0].from;
+	err = add_callchain_ip(thread, cursor, parent,
+			       root_al, &cpumode, ip,
+			       true, flags, NULL,
+			       *branch_from);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int lbr_callchain_add_stitched_lbr_ip(struct thread *thread,
+					     struct callchain_cursor *cursor)
+{
+	struct lbr_stitch *lbr_stitch = thread->lbr_stitch;
+	struct callchain_cursor_node *cnode;
+	struct stitch_list *stitch_node;
+	int err;
+
+	list_for_each_entry(stitch_node, &lbr_stitch->lists, node) {
+		cnode = &stitch_node->cursor;
+
+		err = callchain_cursor_append(cursor, cnode->ip,
+					      &cnode->ms,
+					      cnode->branch,
+					      &cnode->branch_flags,
+					      cnode->nr_loop_iter,
+					      cnode->iter_cycles,
+					      cnode->branch_from,
+					      cnode->srcline);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static struct stitch_list *get_stitch_node(struct thread *thread)
+{
+	struct lbr_stitch *lbr_stitch = thread->lbr_stitch;
+	struct stitch_list *stitch_node;
+
+	if (!list_empty(&lbr_stitch->free_lists)) {
+		stitch_node = list_first_entry(&lbr_stitch->free_lists,
+					       struct stitch_list, node);
+		list_del(&stitch_node->node);
+
+		return stitch_node;
+	}
+
+	return malloc(sizeof(struct stitch_list));
+}
+
+static bool has_stitched_lbr(struct thread *thread,
+			     struct perf_sample *cur,
+			     struct perf_sample *prev,
+			     unsigned int max_lbr,
+			     bool callee)
+{
+	struct branch_stack *cur_stack = cur->branch_stack;
+	struct branch_entry *cur_entries = perf_sample__branch_entries(cur);
+	struct branch_stack *prev_stack = prev->branch_stack;
+	struct branch_entry *prev_entries = perf_sample__branch_entries(prev);
+	struct lbr_stitch *lbr_stitch = thread->lbr_stitch;
+	int i, j, nr_identical_branches = 0;
+	struct stitch_list *stitch_node;
+	u64 cur_base, distance;
+
+	if (!cur_stack || !prev_stack)
+		return false;
+
+	/* Find the physical index of the base-of-stack for current sample. */
+	cur_base = max_lbr - cur_stack->nr + cur_stack->hw_idx + 1;
+
+	distance = (prev_stack->hw_idx > cur_base) ? (prev_stack->hw_idx - cur_base) :
+						     (max_lbr + prev_stack->hw_idx - cur_base);
+	/* Previous sample has shorter stack. Nothing can be stitched. */
+	if (distance + 1 > prev_stack->nr)
+		return false;
+
+	/*
+	 * Check if there are identical LBRs between two samples.
+	 * Identicall LBRs must have same from, to and flags values. Also,
+	 * they have to be saved in the same LBR registers (same physical
+	 * index).
+	 *
+	 * Starts from the base-of-stack of current sample.
+	 */
+	for (i = distance, j = cur_stack->nr - 1; (i >= 0) && (j >= 0); i--, j--) {
+		if ((prev_entries[i].from != cur_entries[j].from) ||
+		    (prev_entries[i].to != cur_entries[j].to) ||
+		    (prev_entries[i].flags.value != cur_entries[j].flags.value))
+			break;
+		nr_identical_branches++;
+	}
+
+	if (!nr_identical_branches)
+		return false;
+
+	/*
+	 * Save the LBRs between the base-of-stack of previous sample
+	 * and the base-of-stack of current sample into lbr_stitch->lists.
+	 * These LBRs will be stitched later.
+	 */
+	for (i = prev_stack->nr - 1; i > (int)distance; i--) {
+
+		if (!lbr_stitch->prev_lbr_cursor[i].valid)
+			continue;
+
+		stitch_node = get_stitch_node(thread);
+		if (!stitch_node)
+			return false;
+
+		memcpy(&stitch_node->cursor, &lbr_stitch->prev_lbr_cursor[i],
+		       sizeof(struct callchain_cursor_node));
+
+		if (callee)
+			list_add(&stitch_node->node, &lbr_stitch->lists);
+		else
+			list_add_tail(&stitch_node->node, &lbr_stitch->lists);
+	}
+
+	return true;
+}
+
+static bool alloc_lbr_stitch(struct thread *thread, unsigned int max_lbr)
+{
+	if (thread->lbr_stitch)
+		return true;
+
+	thread->lbr_stitch = zalloc(sizeof(*thread->lbr_stitch));
+	if (!thread->lbr_stitch)
+		goto err;
+
+	thread->lbr_stitch->prev_lbr_cursor = calloc(max_lbr + 1, sizeof(struct callchain_cursor_node));
+	if (!thread->lbr_stitch->prev_lbr_cursor)
+		goto free_lbr_stitch;
+
+	INIT_LIST_HEAD(&thread->lbr_stitch->lists);
+	INIT_LIST_HEAD(&thread->lbr_stitch->free_lists);
+
+	return true;
+
+free_lbr_stitch:
+	zfree(&thread->lbr_stitch);
+err:
+	pr_warning("Failed to allocate space for stitched LBRs. Disable LBR stitch\n");
+	thread->lbr_stitch_enable = false;
+	return false;
+}
+
 /*
  * Recolve LBR callstack chain sample
  * Return:
@@ -2190,12 +2499,16 @@ static int resolve_lbr_callchain_sample(struct thread *thread,
 					struct perf_sample *sample,
 					struct symbol **parent,
 					struct addr_location *root_al,
-					int max_stack)
+					int max_stack,
+					unsigned int max_lbr)
 {
+	bool callee = (callchain_param.order == ORDER_CALLEE);
 	struct ip_callchain *chain = sample->callchain;
 	int chain_nr = min(max_stack, (int)chain->nr), i;
-	u8 cpumode = PERF_RECORD_MISC_USER;
-	u64 ip, branch_from = 0;
+	struct lbr_stitch *lbr_stitch;
+	bool stitched_lbr = false;
+	u64 branch_from = 0;
+	int err;
 
 	for (i = 0; i < chain_nr; i++) {
 		if (chain->ips[i] == PERF_CONTEXT_USER)
@@ -2203,71 +2516,65 @@ static int resolve_lbr_callchain_sample(struct thread *thread,
 	}
 
 	/* LBR only affects the user callchain */
-	if (i != chain_nr) {
-		struct branch_stack *lbr_stack = sample->branch_stack;
-		struct branch_entry *entries = perf_sample__branch_entries(sample);
-		int lbr_nr = lbr_stack->nr, j, k;
-		bool branch;
-		struct branch_flags *flags;
-		/*
-		 * LBR callstack can only get user call chain.
-		 * The mix_chain_nr is kernel call chain
-		 * number plus LBR user call chain number.
-		 * i is kernel call chain number,
-		 * 1 is PERF_CONTEXT_USER,
-		 * lbr_nr + 1 is the user call chain number.
-		 * For details, please refer to the comments
-		 * in callchain__printf
-		 */
-		int mix_chain_nr = i + 1 + lbr_nr + 1;
+	if (i == chain_nr)
+		return 0;
 
-		for (j = 0; j < mix_chain_nr; j++) {
-			int err;
-			branch = false;
-			flags = NULL;
+	if (thread->lbr_stitch_enable && !sample->no_hw_idx &&
+	    (max_lbr > 0) && alloc_lbr_stitch(thread, max_lbr)) {
+		lbr_stitch = thread->lbr_stitch;
 
-			if (callchain_param.order == ORDER_CALLEE) {
-				if (j < i + 1)
-					ip = chain->ips[j];
-				else if (j > i + 1) {
-					k = j - i - 2;
-					ip = entries[k].from;
-					branch = true;
-					flags = &entries[k].flags;
-				} else {
-					ip = entries[0].to;
-					branch = true;
-					flags = &entries[0].flags;
-					branch_from = entries[0].from;
-				}
-			} else {
-				if (j < lbr_nr) {
-					k = lbr_nr - j - 1;
-					ip = entries[k].from;
-					branch = true;
-					flags = &entries[k].flags;
-				}
-				else if (j > lbr_nr)
-					ip = chain->ips[i + 1 - (j - lbr_nr)];
-				else {
-					ip = entries[0].to;
-					branch = true;
-					flags = &entries[0].flags;
-					branch_from = entries[0].from;
-				}
-			}
+		stitched_lbr = has_stitched_lbr(thread, sample,
+						&lbr_stitch->prev_sample,
+						max_lbr, callee);
 
-			err = add_callchain_ip(thread, cursor, parent,
-					       root_al, &cpumode, ip,
-					       branch, flags, NULL,
-					       branch_from);
+		if (!stitched_lbr && !list_empty(&lbr_stitch->lists)) {
+			list_replace_init(&lbr_stitch->lists,
+					  &lbr_stitch->free_lists);
+		}
+		memcpy(&lbr_stitch->prev_sample, sample, sizeof(*sample));
+	}
+
+	if (callee) {
+		/* Add kernel ip */
+		err = lbr_callchain_add_kernel_ip(thread, cursor, sample,
+						  parent, root_al, branch_from,
+						  true, i);
+		if (err)
+			goto error;
+
+		err = lbr_callchain_add_lbr_ip(thread, cursor, sample, parent,
+					       root_al, &branch_from, true);
+		if (err)
+			goto error;
+
+		if (stitched_lbr) {
+			err = lbr_callchain_add_stitched_lbr_ip(thread, cursor);
 			if (err)
-				return (err < 0) ? err : 0;
+				goto error;
 		}
-		return 1;
+
+	} else {
+		if (stitched_lbr) {
+			err = lbr_callchain_add_stitched_lbr_ip(thread, cursor);
+			if (err)
+				goto error;
+		}
+		err = lbr_callchain_add_lbr_ip(thread, cursor, sample, parent,
+					       root_al, &branch_from, false);
+		if (err)
+			goto error;
+
+		/* Add kernel ip */
+		err = lbr_callchain_add_kernel_ip(thread, cursor, sample,
+						  parent, root_al, branch_from,
+						  false, i);
+		if (err)
+			goto error;
 	}
+	return 1;
 
-	return 0;
+error:
+	return (err < 0) ? err : 0;
 }
 
 static int find_prev_cpumode(struct ip_callchain *chain, struct thread *thread,
@@ -2312,8 +2619,11 @@ static int thread__resolve_callchain_sample(struct thread *thread,
 		chain_nr = chain->nr;
 
 	if (perf_evsel__has_branch_callstack(evsel)) {
+		struct perf_env *env = perf_evsel__env(evsel);
+
 		err = resolve_lbr_callchain_sample(thread, cursor, sample, parent,
-						   root_al, max_stack);
+						   root_al, max_stack,
+						   !env ? 0 : env->max_branches);
 		if (err)
 			return (err < 0) ? err : 0;
 	}
diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c
index 926449a7cdbf..7ad81c8177ea 100644
--- a/tools/perf/util/metricgroup.c
+++ b/tools/perf/util/metricgroup.c
@@ -485,6 +485,39 @@ static bool metricgroup__has_constraint(struct pmu_event *pe)
 	return false;
 }
 
+static int __metricgroup__add_metric(struct strbuf *events,
+			struct list_head *group_list, struct pmu_event *pe)
+{
+
+	const char **ids;
+	int idnum;
+	struct egroup *eg;
+
+	if (expr__find_other(pe->metric_expr, NULL, &ids, &idnum) < 0)
+		return -EINVAL;
+
+	if (events->len > 0)
+		strbuf_addf(events, ",");
+
+	if (metricgroup__has_constraint(pe))
+		metricgroup__add_metric_non_group(events, ids, idnum);
+	else
+		metricgroup__add_metric_weak_group(events, ids, idnum);
+
+	eg = malloc(sizeof(*eg));
+	if (!eg)
+		return -ENOMEM;
+
+	eg->ids = ids;
+	eg->idnum = idnum;
+	eg->metric_name = pe->metric_name;
+	eg->metric_expr = pe->metric_expr;
+	eg->metric_unit = pe->unit;
+	list_add_tail(&eg->nd, group_list);
+
+	return 0;
+}
+
 static int metricgroup__add_metric(const char *metric, struct strbuf *events,
 				   struct list_head *group_list)
 {
@@ -504,35 +537,12 @@ static int metricgroup__add_metric(const char *metric, struct strbuf *events,
 			continue;
 		if (match_metric(pe->metric_group, metric) ||
 		    match_metric(pe->metric_name, metric)) {
-			const char **ids;
-			int idnum;
-			struct egroup *eg;
 
 			pr_debug("metric expr %s for %s\n", pe->metric_expr, pe->metric_name);
 
-			if (expr__find_other(pe->metric_expr,
-					     NULL, &ids, &idnum) < 0)
-				continue;
-			if (events->len > 0)
-				strbuf_addf(events, ",");
-
-			if (metricgroup__has_constraint(pe))
-				metricgroup__add_metric_non_group(events, ids, idnum);
-			else
-				metricgroup__add_metric_weak_group(events, ids, idnum);
-
-			eg = malloc(sizeof(struct egroup));
-			if (!eg) {
-				ret = -ENOMEM;
+			ret = __metricgroup__add_metric(events,	group_list, pe);
+			if (ret == -ENOMEM)
 				break;
-			}
-			eg->ids = ids;
-			eg->idnum = idnum;
-			eg->metric_name = pe->metric_name;
-			eg->metric_expr = pe->metric_expr;
-			eg->metric_unit = pe->unit;
-			list_add_tail(&eg->nd, group_list);
-			ret = 0;
 		}
 	}
 	return ret;
diff --git a/tools/perf/util/ordered-events.h b/tools/perf/util/ordered-events.h
index 0920fb0ec6cc..75345946c4b9 100644
--- a/tools/perf/util/ordered-events.h
+++ b/tools/perf/util/ordered-events.h
@@ -29,7 +29,7 @@ typedef int (*ordered_events__deliver_t)(struct ordered_events *oe,
 
 struct ordered_events_buffer {
 	struct list_head	list;
-	struct ordered_event	event[0];
+	struct ordered_event	event[];
 };
 
 struct ordered_events {
diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l
index baa48f28d57d..c589fc42f058 100644
--- a/tools/perf/util/parse-events.l
+++ b/tools/perf/util/parse-events.l
@@ -286,6 +286,7 @@ no-overwrite		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NOOVERWRITE); }
 percore			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_PERCORE); }
 aux-output		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT); }
 aux-sample-size		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE); }
+r{num_raw_hex}		{ return raw(yyscanner); }
 ,			{ return ','; }
 "/"			{ BEGIN(INITIAL); return '/'; }
 {name_minus}		{ return str(yyscanner, PE_NAME); }
diff --git a/tools/perf/util/parse-events.y b/tools/perf/util/parse-events.y
index 94f8bcd83582..e879eb257874 100644
--- a/tools/perf/util/parse-events.y
+++ b/tools/perf/util/parse-events.y
@@ -706,6 +706,15 @@ event_term
 }
 
 event_term:
+PE_RAW
+{
+	struct parse_events_term *term;
+
+	ABORT_ON(parse_events_term__num(&term, PARSE_EVENTS__TERM_TYPE_CONFIG,
+					NULL, $1, false, &@1, NULL));
+	$$ = term;
+}
+|
 PE_NAME '=' PE_NAME
 {
 	struct parse_events_term *term;
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index ef6a63f3d386..d9f89ed18dea 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -18,6 +18,7 @@
 #include <regex.h>
 #include <perf/cpumap.h>
 #include "debug.h"
+#include "evsel.h"
 #include "pmu.h"
 #include "parse-events.h"
 #include "header.h"
@@ -849,6 +850,7 @@ static struct perf_pmu *pmu_lookup(const char *name)
 
 	INIT_LIST_HEAD(&pmu->format);
 	INIT_LIST_HEAD(&pmu->aliases);
+	INIT_LIST_HEAD(&pmu->caps);
 	list_splice(&format, &pmu->format);
 	list_splice(&aliases, &pmu->aliases);
 	list_add_tail(&pmu->list, &pmus);
@@ -884,6 +886,25 @@ struct perf_pmu *perf_pmu__scan(struct perf_pmu *pmu)
 	return NULL;
 }
 
+struct perf_pmu *perf_evsel__find_pmu(struct evsel *evsel)
+{
+	struct perf_pmu *pmu = NULL;
+
+	while ((pmu = perf_pmu__scan(pmu)) != NULL) {
+		if (pmu->type == evsel->core.attr.type)
+			break;
+	}
+
+	return pmu;
+}
+
+bool perf_evsel__is_aux_event(struct evsel *evsel)
+{
+	struct perf_pmu *pmu = perf_evsel__find_pmu(evsel);
+
+	return pmu && pmu->auxtrace;
+}
+
 struct perf_pmu *perf_pmu__find(const char *name)
 {
 	struct perf_pmu *pmu;
@@ -1574,3 +1595,84 @@ int perf_pmu__scan_file(struct perf_pmu *pmu, const char *name, const char *fmt,
 	va_end(args);
 	return ret;
 }
+
+static int perf_pmu__new_caps(struct list_head *list, char *name, char *value)
+{
+	struct perf_pmu_caps *caps = zalloc(sizeof(*caps));
+
+	if (!caps)
+		return -ENOMEM;
+
+	caps->name = strdup(name);
+	if (!caps->name)
+		goto free_caps;
+	caps->value = strndup(value, strlen(value) - 1);
+	if (!caps->value)
+		goto free_name;
+	list_add_tail(&caps->list, list);
+	return 0;
+
+free_name:
+	zfree(caps->name);
+free_caps:
+	free(caps);
+
+	return -ENOMEM;
+}
+
+/*
+ * Reading/parsing the given pmu capabilities, which should be located at:
+ * /sys/bus/event_source/devices/<dev>/caps as sysfs group attributes.
+ * Return the number of capabilities
+ */
+int perf_pmu__caps_parse(struct perf_pmu *pmu)
+{
+	struct stat st;
+	char caps_path[PATH_MAX];
+	const char *sysfs = sysfs__mountpoint();
+	DIR *caps_dir;
+	struct dirent *evt_ent;
+	int nr_caps = 0;
+
+	if (!sysfs)
+		return -1;
+
+	snprintf(caps_path, PATH_MAX,
+		 "%s" EVENT_SOURCE_DEVICE_PATH "%s/caps", sysfs, pmu->name);
+
+	if (stat(caps_path, &st) < 0)
+		return 0;	/* no error if caps does not exist */
+
+	caps_dir = opendir(caps_path);
+	if (!caps_dir)
+		return -EINVAL;
+
+	while ((evt_ent = readdir(caps_dir)) != NULL) {
+		char path[PATH_MAX + NAME_MAX + 1];
+		char *name = evt_ent->d_name;
+		char value[128];
+		FILE *file;
+
+		if (!strcmp(name, ".") || !strcmp(name, ".."))
+			continue;
+
+		snprintf(path, sizeof(path), "%s/%s", caps_path, name);
+
+		file = fopen(path, "r");
+		if (!file)
+			continue;
+
+		if (!fgets(value, sizeof(value), file) ||
+		    (perf_pmu__new_caps(&pmu->caps, name, value) < 0)) {
+			fclose(file);
+			continue;
+		}
+
+		nr_caps++;
+		fclose(file);
+	}
+
+	closedir(caps_dir);
+
+	return nr_caps;
+}
diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h
index 5fb3f16828df..1edd214b75a5 100644
--- a/tools/perf/util/pmu.h
+++ b/tools/perf/util/pmu.h
@@ -22,6 +22,12 @@ enum {
 
 struct perf_event_attr;
 
+struct perf_pmu_caps {
+	char *name;
+	char *value;
+	struct list_head list;
+};
+
 struct perf_pmu {
 	char *name;
 	__u32 type;
@@ -33,6 +39,7 @@ struct perf_pmu {
 	struct perf_cpu_map *cpus;
 	struct list_head format;  /* HEAD struct perf_pmu_format -> list */
 	struct list_head aliases; /* HEAD struct perf_pmu_alias -> list */
+	struct list_head caps;    /* HEAD struct perf_pmu_caps -> list */
 	struct list_head list;    /* ELEM */
 };
 
@@ -107,4 +114,6 @@ bool pmu_uncore_alias_match(const char *pmu_name, const char *name);
 
 int perf_pmu__convert_scale(const char *scale, char **end, double *sval);
 
+int perf_pmu__caps_parse(struct perf_pmu *pmu);
+
 #endif /* __PMU_H */
diff --git a/tools/perf/util/pstack.c b/tools/perf/util/pstack.c
index 80ff41fc45be..a1d1e4ef6257 100644
--- a/tools/perf/util/pstack.c
+++ b/tools/perf/util/pstack.c
@@ -15,7 +15,7 @@
 struct pstack {
 	unsigned short	top;
 	unsigned short	max_nr_entries;
-	void		*entries[0];
+	void		*entries[];
 };
 
 struct pstack *pstack__new(unsigned short max_nr_entries)
diff --git a/tools/perf/util/record.c b/tools/perf/util/record.c
index 7def66168503..6d3e3df6e2a1 100644
--- a/tools/perf/util/record.c
+++ b/tools/perf/util/record.c
@@ -167,6 +167,64 @@ bool perf_can_aux_sample(void)
 	return true;
 }
 
+/*
+ * perf_evsel__config_leader_sampling() uses special rules for leader sampling.
+ * However, if the leader is an AUX area event, then assume the event to sample
+ * is the next event.
+ */
+static struct evsel *perf_evsel__read_sampler(struct evsel *evsel,
+					      struct evlist *evlist)
+{
+	struct evsel *leader = evsel->leader;
+
+	if (perf_evsel__is_aux_event(leader)) {
+		evlist__for_each_entry(evlist, evsel) {
+			if (evsel->leader == leader && evsel != evsel->leader)
+				return evsel;
+		}
+	}
+
+	return leader;
+}
+
+static void perf_evsel__config_leader_sampling(struct evsel *evsel,
+					       struct evlist *evlist)
+{
+	struct perf_event_attr *attr = &evsel->core.attr;
+	struct evsel *leader = evsel->leader;
+	struct evsel *read_sampler;
+
+	if (!leader->sample_read)
+		return;
+
+	read_sampler = perf_evsel__read_sampler(evsel, evlist);
+
+	if (evsel == read_sampler)
+		return;
+
+	/*
+	 * Disable sampling for all group members other than the leader in
+	 * case the leader 'leads' the sampling, except when the leader is an
+	 * AUX area event, in which case the 2nd event in the group is the one
+	 * that 'leads' the sampling.
+	 */
+	attr->freq           = 0;
+	attr->sample_freq    = 0;
+	attr->sample_period  = 0;
+	attr->write_backward = 0;
+
+	/*
+	 * We don't get a sample for slave events, we make them when delivering
+	 * the group leader sample. Set the slave event to follow the master
+	 * sample_type to ease up reporting.
+	 * An AUX area event also has sample_type requirements, so also include
+	 * the sample type bits from the leader's sample_type to cover that
+	 * case.
+	 */
+	attr->sample_type = read_sampler->core.attr.sample_type |
+			    leader->core.attr.sample_type;
+}
+
 void perf_evlist__config(struct evlist *evlist, struct record_opts *opts,
 			 struct callchain_param *callchain)
 {
@@ -193,6 +251,10 @@ void perf_evlist__config(struct evlist *evlist, struct record_opts *opts,
 			evsel->core.attr.comm_exec = 1;
 	}
 
+	/* Configure leader sampling here now that the sample type is known */
+	evlist__for_each_entry(evlist, evsel)
+		perf_evsel__config_leader_sampling(evsel, evlist);
+
 	if (opts->full_auxtrace) {
 		/*
 		 * Need to be able to synthesize and parse selected events with
diff --git a/tools/perf/util/s390-cpumcf-kernel.h b/tools/perf/util/s390-cpumcf-kernel.h
index d4356030b504..f55ca07f3ca1 100644
--- a/tools/perf/util/s390-cpumcf-kernel.h
+++ b/tools/perf/util/s390-cpumcf-kernel.h
@@ -11,6 +11,7 @@
 
 #define	S390_CPUMCF_DIAG_DEF	0xfeef	/* Counter diagnostic entry ID */
 #define	PERF_EVENT_CPUM_CF_DIAG	0xBC000	/* Event: Counter sets */
+#define PERF_EVENT_CPUM_SF_DIAG	0xBD000 /* Event: Combined-sampling */
 
 struct cf_ctrset_entry {	/* CPU-M CF counter set entry (8 byte) */
 	unsigned int def:16;	/* 0-15  Data Entry Format */
diff --git a/tools/perf/util/s390-cpumsf.c b/tools/perf/util/s390-cpumsf.c
index 6785cd87aa4d..38a942881d1a 100644
--- a/tools/perf/util/s390-cpumsf.c
+++ b/tools/perf/util/s390-cpumsf.c
@@ -1047,6 +1047,14 @@ static void s390_cpumsf_free(struct perf_session *session)
 	free(sf);
 }
 
+static bool
+s390_cpumsf_evsel_is_auxtrace(struct perf_session *session __maybe_unused,
+			      struct evsel *evsel)
+{
+	return evsel->core.attr.type == PERF_TYPE_RAW &&
+	       evsel->core.attr.config == PERF_EVENT_CPUM_SF_DIAG;
+}
+
 static int s390_cpumsf_get_type(const char *cpuid)
 {
 	int ret, family = 0;
@@ -1071,7 +1079,7 @@ static bool check_auxtrace_itrace(struct itrace_synth_opts *itops)
 		itops->pwr_events || itops->errors ||
 		itops->dont_decode || itops->calls || itops->returns ||
 		itops->callchain || itops->thread_stack ||
-		itops->last_branch;
+		itops->last_branch || itops->add_callchain;
 	if (!ison)
 		return true;
 	pr_err("Unsupported --itrace options specified\n");
@@ -1142,6 +1150,7 @@ int s390_cpumsf_process_auxtrace_info(union perf_event *event,
 	sf->auxtrace.flush_events = s390_cpumsf_flush;
 	sf->auxtrace.free_events = s390_cpumsf_free_events;
 	sf->auxtrace.free = s390_cpumsf_free;
+	sf->auxtrace.evsel_is_auxtrace = s390_cpumsf_evsel_is_auxtrace;
 	session->auxtrace = &sf->auxtrace;
 
 	if (dump_trace)
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index f14cc728c358..dc15ddc18b7d 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -237,7 +237,7 @@ static int64_t _sort__addr_cmp(u64 left_ip, u64 right_ip)
 	return (int64_t)(right_ip - left_ip);
 }
 
-static int64_t _sort__sym_cmp(struct symbol *sym_l, struct symbol *sym_r)
+int64_t _sort__sym_cmp(struct symbol *sym_l, struct symbol *sym_r)
 {
 	if (!sym_l || !sym_r)
 		return cmp_null(sym_l, sym_r);
diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h
index cfa6ac6f7d06..66d39c4cfe2b 100644
--- a/tools/perf/util/sort.h
+++ b/tools/perf/util/sort.h
@@ -311,5 +311,7 @@ int64_t
 sort__daddr_cmp(struct hist_entry *left, struct hist_entry *right);
 int64_t
 sort__dcacheline_cmp(struct hist_entry *left, struct hist_entry *right);
+int64_t
+_sort__sym_cmp(struct symbol *sym_l, struct symbol *sym_r);
 char *hist_entry__srcline(struct hist_entry *he);
 #endif	/* __PERF_SORT_H */
diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c
index 03ecb8cd0eec..1ad5c5be7e97 100644
--- a/tools/perf/util/stat-shadow.c
+++ b/tools/perf/util/stat-shadow.c
@@ -729,7 +729,7 @@ static void generic_metric(struct perf_stat_config *config,
 			   struct runtime_stat *st)
 {
 	print_metric_t print_metric = out->print_metric;
-	struct parse_ctx pctx;
+	struct expr_parse_ctx pctx;
 	double ratio, scale;
 	int i;
 	void *ctxp = out->ctx;
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 26bc6a0096ce..8f4300492dc7 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1544,6 +1544,7 @@ static bool dso__is_compatible_symtab_type(struct dso *dso, bool kmod,
 		return true;
 
 	case DSO_BINARY_TYPE__BPF_PROG_INFO:
+	case DSO_BINARY_TYPE__BPF_IMAGE:
 	case DSO_BINARY_TYPE__NOT_FOUND:
 	default:
 		return false;
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 93fc43db1be3..ff4f4c47e148 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -55,7 +55,7 @@ struct symbol {
 	u8		inlined:1;
 	u8		arch_sym;
 	bool		annotate2;
-	char		name[0];
+	char		name[];
 };
 
 void symbol__delete(struct symbol *sym);
diff --git a/tools/perf/util/synthetic-events.c b/tools/perf/util/synthetic-events.c
index a661b122d9d8..9d4aa951eaa6 100644
--- a/tools/perf/util/synthetic-events.c
+++ b/tools/perf/util/synthetic-events.c
@@ -71,7 +71,6 @@ int perf_tool__process_synth_event(struct perf_tool *tool,
 static int perf_event__get_comm_ids(pid_t pid, char *comm, size_t len,
 				    pid_t *tgid, pid_t *ppid)
 {
-	char filename[PATH_MAX];
 	char bf[4096];
 	int fd;
 	size_t size = 0;
@@ -81,11 +80,11 @@ static int perf_event__get_comm_ids(pid_t pid, char *comm, size_t len,
 	*tgid = -1;
 	*ppid = -1;
 
-	snprintf(filename, sizeof(filename), "/proc/%d/status", pid);
+	snprintf(bf, sizeof(bf), "/proc/%d/status", pid);
 
-	fd = open(filename, O_RDONLY);
+	fd = open(bf, O_RDONLY);
 	if (fd < 0) {
-		pr_debug("couldn't open %s\n", filename);
+		pr_debug("couldn't open %s\n", bf);
 		return -1;
 	}
 
@@ -281,9 +280,9 @@ int perf_event__synthesize_mmap_events(struct perf_tool *tool,
 				       struct machine *machine,
 				       bool mmap_data)
 {
-	char filename[PATH_MAX];
 	FILE *fp;
 	unsigned long long t;
+	char bf[BUFSIZ];
 	bool truncation = false;
 	unsigned long long timeout = proc_map_timeout * 1000000ULL;
 	int rc = 0;
@@ -293,15 +292,15 @@ int perf_event__synthesize_mmap_events(struct perf_tool *tool,
 	if (machine__is_default_guest(machine))
 		return 0;
 
-	snprintf(filename, sizeof(filename), "%s/proc/%d/task/%d/maps",
-		 machine->root_dir, pid, pid);
+	snprintf(bf, sizeof(bf), "%s/proc/%d/task/%d/maps",
+		machine->root_dir, pid, pid);
 
-	fp = fopen(filename, "r");
+	fp = fopen(bf, "r");
 	if (fp == NULL) {
 		/*
 		 * We raced with a task exiting - just return:
 		 */
-		pr_debug("couldn't open %s\n", filename);
+		pr_debug("couldn't open %s\n", bf);
 		return -1;
 	}
 
@@ -309,7 +308,6 @@ int perf_event__synthesize_mmap_events(struct perf_tool *tool,
 	t = rdclock();
 
 	while (1) {
-		char bf[BUFSIZ];
 		char prot[5];
 		char execname[PATH_MAX];
 		char anonstr[] = "//anon";
@@ -321,10 +319,10 @@ int perf_event__synthesize_mmap_events(struct perf_tool *tool,
 			break;
 
 		if ((rdclock() - t) > timeout) {
-			pr_warning("Reading %s time out. "
+			pr_warning("Reading %s/proc/%d/task/%d/maps time out. "
 				   "You may want to increase "
 				   "the time limit by --proc-map-timeout\n",
-				   filename);
+				   machine->root_dir, pid, pid);
 			truncation = true;
 			goto out;
 		}
diff --git a/tools/perf/util/thread-stack.c b/tools/perf/util/thread-stack.c
index 0885967d5bc3..83f6c83f5617 100644
--- a/tools/perf/util/thread-stack.c
+++ b/tools/perf/util/thread-stack.c
@@ -497,6 +497,63 @@ void thread_stack__sample(struct thread *thread, int cpu,
 	chain->nr = i;
 }
 
+/*
+ * Hardware sample records, created some time after the event occurred, need to
+ * have subsequent addresses removed from the call chain.
+ */
+void thread_stack__sample_late(struct thread *thread, int cpu,
+			       struct ip_callchain *chain, size_t sz,
+			       u64 sample_ip, u64 kernel_start)
+{
+	struct thread_stack *ts = thread__stack(thread, cpu);
+	u64 sample_context = callchain_context(sample_ip, kernel_start);
+	u64 last_context, context, ip;
+	size_t nr = 0, j;
+
+	if (sz < 2) {
+		chain->nr = 0;
+		return;
+	}
+
+	if (!ts)
+		goto out;
+
+	/*
+	 * When tracing kernel space, kernel addresses occur at the top of the
+	 * call chain after the event occurred but before tracing stopped.
+	 * Skip them.
+	 */
+	for (j = 1; j <= ts->cnt; j++) {
+		ip = ts->stack[ts->cnt - j].ret_addr;
+		context = callchain_context(ip, kernel_start);
+		if (context == PERF_CONTEXT_USER ||
+		    (context == sample_context && ip == sample_ip))
+			break;
+	}
+
+	last_context = sample_ip; /* Use sample_ip as an invalid context */
+
+	for (; nr < sz && j <= ts->cnt; nr++, j++) {
+		ip = ts->stack[ts->cnt - j].ret_addr;
+		context = callchain_context(ip, kernel_start);
+		if (context != last_context) {
+			if (nr >= sz - 1)
+				break;
+			chain->ips[nr++] = context;
+			last_context = context;
+		}
+		chain->ips[nr] = ip;
+	}
+out:
+	if (nr) {
+		chain->nr = nr;
+	} else {
+		chain->ips[0] = sample_context;
+		chain->ips[1] = sample_ip;
+		chain->nr = 2;
+	}
+}
+
 struct call_return_processor *
 call_return_processor__new(int (*process)(struct call_return *cr, u64 *parent_db_id, void *data),
 			   void *data)
diff --git a/tools/perf/util/thread-stack.h b/tools/perf/util/thread-stack.h
index e1ec5a58f1b2..8962ddc4e1ab 100644
--- a/tools/perf/util/thread-stack.h
+++ b/tools/perf/util/thread-stack.h
@@ -85,6 +85,9 @@ int thread_stack__event(struct thread *thread, int cpu, u32 flags, u64 from_ip,
 void thread_stack__set_trace_nr(struct thread *thread, int cpu, u64 trace_nr);
 void thread_stack__sample(struct thread *thread, int cpu, struct ip_callchain *chain,
 			  size_t sz, u64 ip, u64 kernel_start);
+void thread_stack__sample_late(struct thread *thread, int cpu,
+			       struct ip_callchain *chain, size_t sz, u64 ip,
+			       u64 kernel_start);
 int thread_stack__flush(struct thread *thread);
 void thread_stack__free(struct thread *thread);
 size_t thread_stack__depth(struct thread *thread, int cpu);
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 28b719388028..665e5c0618ed 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -47,6 +47,7 @@ struct thread *thread__new(pid_t pid, pid_t tid)
 		thread->tid = tid;
 		thread->ppid = -1;
 		thread->cpu = -1;
+		thread->lbr_stitch_enable = false;
 		INIT_LIST_HEAD(&thread->namespaces_list);
 		INIT_LIST_HEAD(&thread->comm_list);
 		init_rwsem(&thread->namespaces_lock);
@@ -110,6 +111,7 @@ void thread__delete(struct thread *thread)
 
 	exit_rwsem(&thread->namespaces_lock);
 	exit_rwsem(&thread->comm_lock);
+	thread__free_stitch_list(thread);
 	free(thread);
 }
 
@@ -452,3 +454,25 @@ int thread__memcpy(struct thread *thread, struct machine *machine,
 
        return dso__data_read_offset(al.map->dso, machine, offset, buf, len);
 }
+
+void thread__free_stitch_list(struct thread *thread)
+{
+	struct lbr_stitch *lbr_stitch = thread->lbr_stitch;
+	struct stitch_list *pos, *tmp;
+
+	if (!lbr_stitch)
+		return;
+
+	list_for_each_entry_safe(pos, tmp, &lbr_stitch->lists, node) {
+		list_del_init(&pos->node);
+		free(pos);
+	}
+
+	list_for_each_entry_safe(pos, tmp, &lbr_stitch->free_lists, node) {
+		list_del_init(&pos->node);
+		free(pos);
+	}
+
+	zfree(&lbr_stitch->prev_lbr_cursor);
+	zfree(&thread->lbr_stitch);
+}
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 20b96b5d1f15..b066fb30d203 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -13,6 +13,8 @@
 #include <strlist.h>
 #include <intlist.h>
 #include "rwsem.h"
+#include "event.h"
+#include "callchain.h"
 
 struct addr_location;
 struct map;
@@ -20,6 +22,13 @@ struct perf_record_namespaces;
 struct thread_stack;
 struct unwind_libunwind_ops;
 
+struct lbr_stitch {
+	struct list_head		lists;
+	struct list_head		free_lists;
+	struct perf_sample		prev_sample;
+	struct callchain_cursor_node	*prev_lbr_cursor;
+};
+
 struct thread {
 	union {
 		struct rb_node	 rb_node;
@@ -46,6 +55,10 @@ struct thread {
 	struct srccode_state	srccode_state;
 	bool			filter;
 	int			filter_entry_depth;
+
+	/* LBR call stack stitch */
+	bool			lbr_stitch_enable;
+	struct lbr_stitch	*lbr_stitch;
 };
 
 struct machine;
@@ -142,4 +155,6 @@ static inline bool thread__is_filtered(struct thread *thread)
 	return false;
 }
 
+void thread__free_stitch_list(struct thread *thread);
+
 #endif	/* __PERF_THREAD_H */
diff --git a/tools/perf/util/top.h b/tools/perf/util/top.h
index f117d4f4821e..45dc84ddff37 100644
--- a/tools/perf/util/top.h
+++ b/tools/perf/util/top.h
@@ -36,6 +36,7 @@ struct perf_top {
 	bool		   use_tui, use_stdio;
 	bool		   vmlinux_warned;
 	bool		   dump_symtab;
+	bool		   stitch_lbr;
 	struct hist_entry  *sym_filter_entry;
 	struct evsel 	   *sym_evsel;
 	struct perf_session *session;
diff --git a/tools/perf/util/unwind-libunwind-local.c b/tools/perf/util/unwind-libunwind-local.c
index b4649f5a0c2f..9aededc0bc06 100644
--- a/tools/perf/util/unwind-libunwind-local.c
+++ b/tools/perf/util/unwind-libunwind-local.c
@@ -243,7 +243,7 @@ struct eh_frame_hdr {
 	 *    encoded_t fde_addr;
 	 * } binary_search_table[fde_count];
 	 */
-	char data[0];
+	char data[];
 } __packed;
 
 static int unwind_spec_ehframe(struct dso *dso, struct machine *machine,
diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c
index d707c9624dd9..37a9492edb3e 100644
--- a/tools/perf/util/util.c
+++ b/tools/perf/util/util.c
@@ -290,6 +290,7 @@ int perf_event_paranoid(void)
 bool perf_event_paranoid_check(int max_level)
 {
 	return perf_cap__capable(CAP_SYS_ADMIN) ||
+			perf_cap__capable(CAP_PERFMON) ||
 			perf_event_paranoid() <= max_level;
 }
 
diff --git a/tools/spi/Makefile b/tools/spi/Makefile
index 2249a1546cc1..ada881afb489 100644
--- a/tools/spi/Makefile
+++ b/tools/spi/Makefile
@@ -52,7 +52,9 @@ $(OUTPUT)spidev_fdx: $(SPIDEV_FDX_IN)
 clean:
 	rm -f $(ALL_PROGRAMS)
 	rm -rf $(OUTPUT)include/
-	find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete
+	find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete
+	find $(if $(OUTPUT),$(OUTPUT),.) -name '\.*.o.d' -delete
+	find $(if $(OUTPUT),$(OUTPUT),.) -name '\.*.o.cmd' -delete
 
 install: $(ALL_PROGRAMS)
 	install -d -m 755 $(DESTDIR)$(bindir);		\
diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c
index 27967dd90f8f..eec23fa693bd 100644
--- a/tools/spi/spidev_test.c
+++ b/tools/spi/spidev_test.c
@@ -128,18 +128,22 @@ static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len)
 		.bits_per_word = bits,
 	};
 
-	if (mode & SPI_TX_QUAD)
+	if (mode & SPI_TX_OCTAL)
+		tr.tx_nbits = 8;
+	else if (mode & SPI_TX_QUAD)
 		tr.tx_nbits = 4;
 	else if (mode & SPI_TX_DUAL)
 		tr.tx_nbits = 2;
-	if (mode & SPI_RX_QUAD)
+	if (mode & SPI_RX_OCTAL)
+		tr.rx_nbits = 8;
+	else if (mode & SPI_RX_QUAD)
 		tr.rx_nbits = 4;
 	else if (mode & SPI_RX_DUAL)
 		tr.rx_nbits = 2;
 	if (!(mode & SPI_LOOP)) {
-		if (mode & (SPI_TX_QUAD | SPI_TX_DUAL))
+		if (mode & (SPI_TX_OCTAL | SPI_TX_QUAD | SPI_TX_DUAL))
 			tr.rx_buf = 0;
-		else if (mode & (SPI_RX_QUAD | SPI_RX_DUAL))
+		else if (mode & (SPI_RX_OCTAL | SPI_RX_QUAD | SPI_RX_DUAL))
 			tr.tx_buf = 0;
 	}
 
@@ -187,6 +191,7 @@ static void print_usage(const char *prog)
 	     "  -R --ready    slave pulls low to pause\n"
 	     "  -2 --dual     dual transfer\n"
 	     "  -4 --quad     quad transfer\n"
+	     "  -8 --octal    octal transfer\n"
 	     "  -S --size     transfer size\n"
 	     "  -I --iter     iterations\n");
 	exit(1);
@@ -213,13 +218,14 @@ static void parse_opts(int argc, char *argv[])
 			{ "dual",    0, 0, '2' },
 			{ "verbose", 0, 0, 'v' },
 			{ "quad",    0, 0, '4' },
+			{ "octal",   0, 0, '8' },
 			{ "size",    1, 0, 'S' },
 			{ "iter",    1, 0, 'I' },
 			{ NULL, 0, 0, 0 },
 		};
 		int c;
 
-		c = getopt_long(argc, argv, "D:s:d:b:i:o:lHOLC3NR24p:vS:I:",
+		c = getopt_long(argc, argv, "D:s:d:b:i:o:lHOLC3NR248p:vS:I:",
 				lopts, NULL);
 
 		if (c == -1)
@@ -280,6 +286,9 @@ static void parse_opts(int argc, char *argv[])
 		case '4':
 			mode |= SPI_TX_QUAD;
 			break;
+		case '8':
+			mode |= SPI_TX_OCTAL;
+			break;
 		case 'S':
 			transfer_size = atoi(optarg);
 			break;
@@ -295,6 +304,8 @@ static void parse_opts(int argc, char *argv[])
 			mode |= SPI_RX_DUAL;
 		if (mode & SPI_TX_QUAD)
 			mode |= SPI_RX_QUAD;
+		if (mode & SPI_TX_OCTAL)
+			mode |= SPI_RX_OCTAL;
 	}
 }
 
diff --git a/tools/testing/nvdimm/test/nfit_test.h b/tools/testing/nvdimm/test/nfit_test.h
index db3c07beb9d1..b5f7a996c4d0 100644
--- a/tools/testing/nvdimm/test/nfit_test.h
+++ b/tools/testing/nvdimm/test/nfit_test.h
@@ -51,7 +51,7 @@ struct nd_cmd_translate_spa {
 		__u32 nfit_device_handle;
 		__u32 _reserved;
 		__u64 dpa;
-	} __packed devices[0];
+	} __packed devices[];
 
 } __packed;
 
@@ -74,7 +74,7 @@ struct nd_cmd_ars_err_inj_stat {
 	struct nd_error_stat_query_record {
 		__u64 err_inj_stat_spa_range_base;
 		__u64 err_inj_stat_spa_range_length;
-	} __packed record[0];
+	} __packed record[];
 } __packed;
 
 #define ND_INTEL_SMART			 1
@@ -180,7 +180,7 @@ struct nd_intel_fw_send_data {
 	__u32 context;
 	__u32 offset;
 	__u32 length;
-	__u8 data[0];
+	__u8 data[];
 /* this field is not declared due ot variable data from input */
 /*	__u32 status; */
 } __packed;
diff --git a/tools/testing/radix-tree/idr-test.c b/tools/testing/radix-tree/idr-test.c
index 8995092d541e..3b796dd5e577 100644
--- a/tools/testing/radix-tree/idr-test.c
+++ b/tools/testing/radix-tree/idr-test.c
@@ -523,8 +523,27 @@ static void *ida_random_fn(void *arg)
 	return NULL;
 }
 
+static void *ida_leak_fn(void *arg)
+{
+	struct ida *ida = arg;
+	time_t s = time(NULL);
+	int i, ret;
+
+	rcu_register_thread();
+
+	do for (i = 0; i < 1000; i++) {
+		ret = ida_alloc_range(ida, 128, 128, GFP_KERNEL);
+		if (ret >= 0)
+			ida_free(ida, 128);
+	} while (time(NULL) < s + 2);
+
+	rcu_unregister_thread();
+	return NULL;
+}
+
 void ida_thread_tests(void)
 {
+	DEFINE_IDA(ida);
 	pthread_t threads[20];
 	int i;
 
@@ -536,6 +555,16 @@ void ida_thread_tests(void)
 
 	while (i--)
 		pthread_join(threads[i], NULL);
+
+	for (i = 0; i < ARRAY_SIZE(threads); i++)
+		if (pthread_create(&threads[i], NULL, ida_leak_fn, &ida)) {
+			perror("creating ida thread");
+			exit(1);
+		}
+
+	while (i--)
+		pthread_join(threads[i], NULL);
+	assert(ida_is_empty(&ida));
 }
 
 void ida_tests(void)
diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore
index c30079c86998..3ff031972975 100644
--- a/tools/testing/selftests/bpf/.gitignore
+++ b/tools/testing/selftests/bpf/.gitignore
@@ -30,8 +30,6 @@ test_tcpnotify_user
 test_libbpf
 test_tcp_check_syncookie_user
 test_sysctl
-test_hashmap
-test_btf_dump
 test_current_pid_tgid_new_ns
 xdping
 test_cpp
@@ -39,4 +37,4 @@ test_cpp
 /no_alu32
 /bpf_gcc
 /tools
-
+/runqslower
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 7729892e0b04..3d942be23d09 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -20,9 +20,10 @@ CLANG		?= clang
 LLC		?= llc
 LLVM_OBJCOPY	?= llvm-objcopy
 BPF_GCC		?= $(shell command -v bpf-gcc;)
-CFLAGS += -g -rdynamic -Wall -O2 $(GENFLAGS) -I$(CURDIR)		\
-	  -I$(INCLUDE_DIR) -I$(GENDIR) -I$(LIBDIR) -I$(TOOLSINCDIR)	\
-	  -I$(APIDIR)							\
+SAN_CFLAGS	?=
+CFLAGS += -g -rdynamic -Wall -O2 $(GENFLAGS) $(SAN_CFLAGS)		\
+	  -I$(CURDIR) -I$(INCLUDE_DIR) -I$(GENDIR) -I$(LIBDIR)		\
+	  -I$(TOOLSINCDIR) -I$(APIDIR)					\
 	  -Dbpf_prog_load=bpf_prog_test_load				\
 	  -Dbpf_load_program=bpf_test_load_program
 LDLIBS += -lcap -lelf -lz -lrt -lpthread
@@ -32,7 +33,7 @@ TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test
 	test_align test_verifier_log test_dev_cgroup test_tcpbpf_user \
 	test_sock test_btf test_sockmap get_cgroup_id_user test_socket_cookie \
 	test_cgroup_storage \
-	test_netcnt test_tcpnotify_user test_sock_fields test_sysctl test_hashmap \
+	test_netcnt test_tcpnotify_user test_sock_fields test_sysctl \
 	test_progs-no_alu32 \
 	test_current_pid_tgid_new_ns
 
@@ -141,7 +142,8 @@ VMLINUX_BTF := $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS))))
 $(OUTPUT)/runqslower: $(BPFOBJ)
 	$(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/runqslower	\
 		    OUTPUT=$(SCRATCH_DIR)/ VMLINUX_BTF=$(VMLINUX_BTF)   \
-		    BPFOBJ=$(BPFOBJ) BPF_INCLUDE=$(INCLUDE_DIR)
+		    BPFOBJ=$(BPFOBJ) BPF_INCLUDE=$(INCLUDE_DIR) &&	\
+		    cp $(SCRATCH_DIR)/runqslower $@
 
 $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/test_stub.o $(BPFOBJ)
 
@@ -241,7 +243,7 @@ define GCC_BPF_BUILD_RULE
 	$(BPF_GCC) $3 $4 -O2 -c $1 -o $2
 endef
 
-SKEL_BLACKLIST := btf__% test_pinning_invalid.c
+SKEL_BLACKLIST := btf__% test_pinning_invalid.c test_sk_assign.c
 
 # Set up extra TRUNNER_XXX "temporary" variables in the environment (relies on
 # $eval()) and pass control to DEFINE_TEST_RUNNER_RULES.
@@ -323,7 +325,7 @@ $(TRUNNER_TEST_OBJS): $(TRUNNER_OUTPUT)/%.test.o:			\
 		      $(TRUNNER_BPF_SKELS)				\
 		      $$(BPFOBJ) | $(TRUNNER_OUTPUT)
 	$$(call msg,TEST-OBJ,$(TRUNNER_BINARY),$$@)
-	cd $$(@D) && $$(CC) $$(CFLAGS) -c $(CURDIR)/$$< $$(LDLIBS) -o $$(@F)
+	cd $$(@D) && $$(CC) -I. $$(CFLAGS) -c $(CURDIR)/$$< $$(LDLIBS) -o $$(@F)
 
 $(TRUNNER_EXTRA_OBJS): $(TRUNNER_OUTPUT)/%.o:				\
 		       %.c						\
diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
index f10029821e16..7afa4160416f 100644
--- a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
+++ b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
@@ -1,26 +1,30 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <test_progs.h>
 
+#define nr_iters 2
+
 void test_bpf_obj_id(void)
 {
 	const __u64 array_magic_value = 0xfaceb00c;
 	const __u32 array_key = 0;
-	const int nr_iters = 2;
 	const char *file = "./test_obj_id.o";
 	const char *expected_prog_name = "test_obj_id";
 	const char *expected_map_name = "test_map_id";
 	const __u64 nsec_per_sec = 1000000000;
 
-	struct bpf_object *objs[nr_iters];
+	struct bpf_object *objs[nr_iters] = {};
+	struct bpf_link *links[nr_iters] = {};
+	struct bpf_program *prog;
 	int prog_fds[nr_iters], map_fds[nr_iters];
 	/* +1 to test for the info_len returned by kernel */
 	struct bpf_prog_info prog_infos[nr_iters + 1];
 	struct bpf_map_info map_infos[nr_iters + 1];
+	struct bpf_link_info link_infos[nr_iters + 1];
 	/* Each prog only uses one map. +1 to test nr_map_ids
 	 * returned by kernel.
 	 */
 	__u32 map_ids[nr_iters + 1];
-	char jited_insns[128], xlated_insns[128], zeros[128];
+	char jited_insns[128], xlated_insns[128], zeros[128], tp_name[128];
 	__u32 i, next_id, info_len, nr_id_found, duration = 0;
 	struct timespec real_time_ts, boot_time_ts;
 	int err = 0;
@@ -36,14 +40,15 @@ void test_bpf_obj_id(void)
 	CHECK(err >= 0 || errno != ENOENT,
 	      "get-fd-by-notexist-map-id", "err %d errno %d\n", err, errno);
 
-	for (i = 0; i < nr_iters; i++)
-		objs[i] = NULL;
+	err = bpf_link_get_fd_by_id(0);
+	CHECK(err >= 0 || errno != ENOENT,
+	      "get-fd-by-notexist-link-id", "err %d errno %d\n", err, errno);
 
 	/* Check bpf_obj_get_info_by_fd() */
 	bzero(zeros, sizeof(zeros));
 	for (i = 0; i < nr_iters; i++) {
 		now = time(NULL);
-		err = bpf_prog_load(file, BPF_PROG_TYPE_SOCKET_FILTER,
+		err = bpf_prog_load(file, BPF_PROG_TYPE_RAW_TRACEPOINT,
 				    &objs[i], &prog_fds[i]);
 		/* test_obj_id.o is a dumb prog. It should never fail
 		 * to load.
@@ -60,6 +65,17 @@ void test_bpf_obj_id(void)
 		if (CHECK_FAIL(err))
 			goto done;
 
+		prog = bpf_object__find_program_by_title(objs[i],
+							 "raw_tp/sys_enter");
+		if (CHECK_FAIL(!prog))
+			goto done;
+		links[i] = bpf_program__attach(prog);
+		err = libbpf_get_error(links[i]);
+		if (CHECK(err, "prog_attach", "prog #%d, err %d\n", i, err)) {
+			links[i] = NULL;
+			goto done;
+		}
+
 		/* Check getting map info */
 		info_len = sizeof(struct bpf_map_info) * 2;
 		bzero(&map_infos[i], info_len);
@@ -107,7 +123,7 @@ void test_bpf_obj_id(void)
 		load_time = (real_time_ts.tv_sec - boot_time_ts.tv_sec)
 			+ (prog_infos[i].load_time / nsec_per_sec);
 		if (CHECK(err ||
-			  prog_infos[i].type != BPF_PROG_TYPE_SOCKET_FILTER ||
+			  prog_infos[i].type != BPF_PROG_TYPE_RAW_TRACEPOINT ||
 			  info_len != sizeof(struct bpf_prog_info) ||
 			  (env.jit_enabled && !prog_infos[i].jited_prog_len) ||
 			  (env.jit_enabled &&
@@ -120,7 +136,11 @@ void test_bpf_obj_id(void)
 			  *(int *)(long)prog_infos[i].map_ids != map_infos[i].id ||
 			  strcmp((char *)prog_infos[i].name, expected_prog_name),
 			  "get-prog-info(fd)",
-			  "err %d errno %d i %d type %d(%d) info_len %u(%zu) jit_enabled %d jited_prog_len %u xlated_prog_len %u jited_prog %d xlated_prog %d load_time %lu(%lu) uid %u(%u) nr_map_ids %u(%u) map_id %u(%u) name %s(%s)\n",
+			  "err %d errno %d i %d type %d(%d) info_len %u(%zu) "
+			  "jit_enabled %d jited_prog_len %u xlated_prog_len %u "
+			  "jited_prog %d xlated_prog %d load_time %lu(%lu) "
+			  "uid %u(%u) nr_map_ids %u(%u) map_id %u(%u) "
+			  "name %s(%s)\n",
 			  err, errno, i,
 			  prog_infos[i].type, BPF_PROG_TYPE_SOCKET_FILTER,
 			  info_len, sizeof(struct bpf_prog_info),
@@ -135,6 +155,33 @@ void test_bpf_obj_id(void)
 			  *(int *)(long)prog_infos[i].map_ids, map_infos[i].id,
 			  prog_infos[i].name, expected_prog_name))
 			goto done;
+
+		/* Check getting link info */
+		info_len = sizeof(struct bpf_link_info) * 2;
+		bzero(&link_infos[i], info_len);
+		link_infos[i].raw_tracepoint.tp_name = (__u64)&tp_name;
+		link_infos[i].raw_tracepoint.tp_name_len = sizeof(tp_name);
+		err = bpf_obj_get_info_by_fd(bpf_link__fd(links[i]),
+					     &link_infos[i], &info_len);
+		if (CHECK(err ||
+			  link_infos[i].type != BPF_LINK_TYPE_RAW_TRACEPOINT ||
+			  link_infos[i].prog_id != prog_infos[i].id ||
+			  link_infos[i].raw_tracepoint.tp_name != (__u64)&tp_name ||
+			  strcmp((char *)link_infos[i].raw_tracepoint.tp_name,
+				 "sys_enter") ||
+			  info_len != sizeof(struct bpf_link_info),
+			  "get-link-info(fd)",
+			  "err %d errno %d info_len %u(%zu) type %d(%d) id %d "
+			  "prog_id %d (%d) tp_name %s(%s)\n",
+			  err, errno,
+			  info_len, sizeof(struct bpf_link_info),
+			  link_infos[i].type, BPF_LINK_TYPE_RAW_TRACEPOINT,
+			  link_infos[i].id,
+			  link_infos[i].prog_id, prog_infos[i].id,
+			  (char *)link_infos[i].raw_tracepoint.tp_name,
+			  "sys_enter"))
+			goto done;
+
 	}
 
 	/* Check bpf_prog_get_next_id() */
@@ -247,7 +294,52 @@ void test_bpf_obj_id(void)
 	      "nr_id_found %u(%u)\n",
 	      nr_id_found, nr_iters);
 
+	/* Check bpf_link_get_next_id() */
+	nr_id_found = 0;
+	next_id = 0;
+	while (!bpf_link_get_next_id(next_id, &next_id)) {
+		struct bpf_link_info link_info;
+		int link_fd, cmp_res;
+
+		info_len = sizeof(link_info);
+		memset(&link_info, 0, info_len);
+
+		link_fd = bpf_link_get_fd_by_id(next_id);
+		if (link_fd < 0 && errno == ENOENT)
+			/* The bpf_link is in the dead row */
+			continue;
+		if (CHECK(link_fd < 0, "get-link-fd(next_id)",
+			  "link_fd %d next_id %u errno %d\n",
+			  link_fd, next_id, errno))
+			break;
+
+		for (i = 0; i < nr_iters; i++)
+			if (link_infos[i].id == next_id)
+				break;
+
+		if (i == nr_iters)
+			continue;
+
+		nr_id_found++;
+
+		err = bpf_obj_get_info_by_fd(link_fd, &link_info, &info_len);
+		cmp_res = memcmp(&link_info, &link_infos[i],
+				offsetof(struct bpf_link_info, raw_tracepoint));
+		CHECK(err || info_len != sizeof(link_info) || cmp_res,
+		      "check get-link-info(next_id->fd)",
+		      "err %d errno %d info_len %u(%zu) memcmp %d\n",
+		      err, errno, info_len, sizeof(struct bpf_link_info),
+		      cmp_res);
+
+		close(link_fd);
+	}
+	CHECK(nr_id_found != nr_iters,
+	      "check total link id found by get_next_id",
+	      "nr_id_found %u(%u)\n", nr_id_found, nr_iters);
+
 done:
-	for (i = 0; i < nr_iters; i++)
+	for (i = 0; i < nr_iters; i++) {
+		bpf_link__destroy(links[i]);
 		bpf_object__close(objs[i]);
+	}
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c b/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
new file mode 100644
index 000000000000..f7ee8fa377ad
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2020 Facebook */
+
+#include <test_progs.h>
+
+#include "test_btf_map_in_map.skel.h"
+
+void test_btf_map_in_map(void)
+{
+	int duration = 0, err, key = 0, val;
+	struct test_btf_map_in_map* skel;
+
+	skel = test_btf_map_in_map__open_and_load();
+	if (CHECK(!skel, "skel_open", "failed to open&load skeleton\n"))
+		return;
+
+	err = test_btf_map_in_map__attach(skel);
+	if (CHECK(err, "skel_attach", "skeleton attach failed: %d\n", err))
+		goto cleanup;
+
+	/* inner1 = input, inner2 = input + 1 */
+	val = bpf_map__fd(skel->maps.inner_map1);
+	bpf_map_update_elem(bpf_map__fd(skel->maps.outer_arr), &key, &val, 0);
+	val = bpf_map__fd(skel->maps.inner_map2);
+	bpf_map_update_elem(bpf_map__fd(skel->maps.outer_hash), &key, &val, 0);
+	skel->bss->input = 1;
+	usleep(1);
+
+	bpf_map_lookup_elem(bpf_map__fd(skel->maps.inner_map1), &key, &val);
+	CHECK(val != 1, "inner1", "got %d != exp %d\n", val, 1);
+	bpf_map_lookup_elem(bpf_map__fd(skel->maps.inner_map2), &key, &val);
+	CHECK(val != 2, "inner2", "got %d != exp %d\n", val, 2);
+
+	/* inner1 = input + 1, inner2 = input */
+	val = bpf_map__fd(skel->maps.inner_map2);
+	bpf_map_update_elem(bpf_map__fd(skel->maps.outer_arr), &key, &val, 0);
+	val = bpf_map__fd(skel->maps.inner_map1);
+	bpf_map_update_elem(bpf_map__fd(skel->maps.outer_hash), &key, &val, 0);
+	skel->bss->input = 3;
+	usleep(1);
+
+	bpf_map_lookup_elem(bpf_map__fd(skel->maps.inner_map1), &key, &val);
+	CHECK(val != 4, "inner1", "got %d != exp %d\n", val, 4);
+	bpf_map_lookup_elem(bpf_map__fd(skel->maps.inner_map2), &key, &val);
+	CHECK(val != 3, "inner2", "got %d != exp %d\n", val, 3);
+
+cleanup:
+	test_btf_map_in_map__destroy(skel);
+}
diff --git a/tools/testing/selftests/bpf/prog_tests/cls_redirect.c b/tools/testing/selftests/bpf/prog_tests/cls_redirect.c
new file mode 100644
index 000000000000..f259085cca6a
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/cls_redirect.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+// Copyright (c) 2020 Cloudflare
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <string.h>
+
+#include <linux/pkt_cls.h>
+
+#include <test_progs.h>
+
+#include "progs/test_cls_redirect.h"
+#include "test_cls_redirect.skel.h"
+
+#define ENCAP_IP INADDR_LOOPBACK
+#define ENCAP_PORT (1234)
+
+struct addr_port {
+	in_port_t port;
+	union {
+		struct in_addr in_addr;
+		struct in6_addr in6_addr;
+	};
+};
+
+struct tuple {
+	int family;
+	struct addr_port src;
+	struct addr_port dst;
+};
+
+static int start_server(const struct sockaddr *addr, socklen_t len, int type)
+{
+	int fd = socket(addr->sa_family, type, 0);
+	if (CHECK_FAIL(fd == -1))
+		return -1;
+	if (CHECK_FAIL(bind(fd, addr, len) == -1))
+		goto err;
+	if (type == SOCK_STREAM && CHECK_FAIL(listen(fd, 128) == -1))
+		goto err;
+
+	return fd;
+
+err:
+	close(fd);
+	return -1;
+}
+
+static int connect_to_server(const struct sockaddr *addr, socklen_t len,
+			     int type)
+{
+	int fd = socket(addr->sa_family, type, 0);
+	if (CHECK_FAIL(fd == -1))
+		return -1;
+	if (CHECK_FAIL(connect(fd, addr, len)))
+		goto err;
+
+	return fd;
+
+err:
+	close(fd);
+	return -1;
+}
+
+static bool fill_addr_port(const struct sockaddr *sa, struct addr_port *ap)
+{
+	const struct sockaddr_in6 *in6;
+	const struct sockaddr_in *in;
+
+	switch (sa->sa_family) {
+	case AF_INET:
+		in = (const struct sockaddr_in *)sa;
+		ap->in_addr = in->sin_addr;
+		ap->port = in->sin_port;
+		return true;
+
+	case AF_INET6:
+		in6 = (const struct sockaddr_in6 *)sa;
+		ap->in6_addr = in6->sin6_addr;
+		ap->port = in6->sin6_port;
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool set_up_conn(const struct sockaddr *addr, socklen_t len, int type,
+			int *server, int *conn, struct tuple *tuple)
+{
+	struct sockaddr_storage ss;
+	socklen_t slen = sizeof(ss);
+	struct sockaddr *sa = (struct sockaddr *)&ss;
+
+	*server = start_server(addr, len, type);
+	if (*server < 0)
+		return false;
+
+	if (CHECK_FAIL(getsockname(*server, sa, &slen)))
+		goto close_server;
+
+	*conn = connect_to_server(sa, slen, type);
+	if (*conn < 0)
+		goto close_server;
+
+	/* We want to simulate packets arriving at conn, so we have to
+	 * swap src and dst.
+	 */
+	slen = sizeof(ss);
+	if (CHECK_FAIL(getsockname(*conn, sa, &slen)))
+		goto close_conn;
+
+	if (CHECK_FAIL(!fill_addr_port(sa, &tuple->dst)))
+		goto close_conn;
+
+	slen = sizeof(ss);
+	if (CHECK_FAIL(getpeername(*conn, sa, &slen)))
+		goto close_conn;
+
+	if (CHECK_FAIL(!fill_addr_port(sa, &tuple->src)))
+		goto close_conn;
+
+	tuple->family = ss.ss_family;
+	return true;
+
+close_conn:
+	close(*conn);
+	*conn = -1;
+close_server:
+	close(*server);
+	*server = -1;
+	return false;
+}
+
+static socklen_t prepare_addr(struct sockaddr_storage *addr, int family)
+{
+	struct sockaddr_in *addr4;
+	struct sockaddr_in6 *addr6;
+
+	switch (family) {
+	case AF_INET:
+		addr4 = (struct sockaddr_in *)addr;
+		memset(addr4, 0, sizeof(*addr4));
+		addr4->sin_family = family;
+		addr4->sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+		return sizeof(*addr4);
+	case AF_INET6:
+		addr6 = (struct sockaddr_in6 *)addr;
+		memset(addr6, 0, sizeof(*addr6));
+		addr6->sin6_family = family;
+		addr6->sin6_addr = in6addr_loopback;
+		return sizeof(*addr6);
+	default:
+		fprintf(stderr, "Invalid family %d", family);
+		return 0;
+	}
+}
+
+static bool was_decapsulated(struct bpf_prog_test_run_attr *tattr)
+{
+	return tattr->data_size_out < tattr->data_size_in;
+}
+
+enum type {
+	UDP,
+	TCP,
+	__NR_KIND,
+};
+
+enum hops {
+	NO_HOPS,
+	ONE_HOP,
+};
+
+enum flags {
+	NONE,
+	SYN,
+	ACK,
+};
+
+enum conn {
+	KNOWN_CONN,
+	UNKNOWN_CONN,
+};
+
+enum result {
+	ACCEPT,
+	FORWARD,
+};
+
+struct test_cfg {
+	enum type type;
+	enum result result;
+	enum conn conn;
+	enum hops hops;
+	enum flags flags;
+};
+
+static int test_str(void *buf, size_t len, const struct test_cfg *test,
+		    int family)
+{
+	const char *family_str, *type, *conn, *hops, *result, *flags;
+
+	family_str = "IPv4";
+	if (family == AF_INET6)
+		family_str = "IPv6";
+
+	type = "TCP";
+	if (test->type == UDP)
+		type = "UDP";
+
+	conn = "known";
+	if (test->conn == UNKNOWN_CONN)
+		conn = "unknown";
+
+	hops = "no hops";
+	if (test->hops == ONE_HOP)
+		hops = "one hop";
+
+	result = "accept";
+	if (test->result == FORWARD)
+		result = "forward";
+
+	flags = "none";
+	if (test->flags == SYN)
+		flags = "SYN";
+	else if (test->flags == ACK)
+		flags = "ACK";
+
+	return snprintf(buf, len, "%s %s %s %s (%s, flags: %s)", family_str,
+			type, result, conn, hops, flags);
+}
+
+static struct test_cfg tests[] = {
+	{ TCP, ACCEPT, UNKNOWN_CONN, NO_HOPS, SYN },
+	{ TCP, ACCEPT, UNKNOWN_CONN, NO_HOPS, ACK },
+	{ TCP, FORWARD, UNKNOWN_CONN, ONE_HOP, ACK },
+	{ TCP, ACCEPT, KNOWN_CONN, ONE_HOP, ACK },
+	{ UDP, ACCEPT, UNKNOWN_CONN, NO_HOPS, NONE },
+	{ UDP, FORWARD, UNKNOWN_CONN, ONE_HOP, NONE },
+	{ UDP, ACCEPT, KNOWN_CONN, ONE_HOP, NONE },
+};
+
+static void encap_init(encap_headers_t *encap, uint8_t hop_count, uint8_t proto)
+{
+	const uint8_t hlen =
+		(sizeof(struct guehdr) / sizeof(uint32_t)) + hop_count;
+	*encap = (encap_headers_t){
+		.eth = { .h_proto = htons(ETH_P_IP) },
+		.ip = {
+			.ihl = 5,
+			.version = 4,
+			.ttl = IPDEFTTL,
+			.protocol = IPPROTO_UDP,
+			.daddr = htonl(ENCAP_IP)
+		},
+		.udp = {
+			.dest = htons(ENCAP_PORT),
+		},
+		.gue = {
+			.hlen = hlen,
+			.proto_ctype = proto
+		},
+		.unigue = {
+			.hop_count = hop_count
+		},
+	};
+}
+
+static size_t build_input(const struct test_cfg *test, void *const buf,
+			  const struct tuple *tuple)
+{
+	in_port_t sport = tuple->src.port;
+	encap_headers_t encap;
+	struct iphdr ip;
+	struct ipv6hdr ipv6;
+	struct tcphdr tcp;
+	struct udphdr udp;
+	struct in_addr next_hop;
+	uint8_t *p = buf;
+	int proto;
+
+	proto = IPPROTO_IPIP;
+	if (tuple->family == AF_INET6)
+		proto = IPPROTO_IPV6;
+
+	encap_init(&encap, test->hops == ONE_HOP ? 1 : 0, proto);
+	p = mempcpy(p, &encap, sizeof(encap));
+
+	if (test->hops == ONE_HOP) {
+		next_hop = (struct in_addr){ .s_addr = htonl(0x7f000002) };
+		p = mempcpy(p, &next_hop, sizeof(next_hop));
+	}
+
+	proto = IPPROTO_TCP;
+	if (test->type == UDP)
+		proto = IPPROTO_UDP;
+
+	switch (tuple->family) {
+	case AF_INET:
+		ip = (struct iphdr){
+			.ihl = 5,
+			.version = 4,
+			.ttl = IPDEFTTL,
+			.protocol = proto,
+			.saddr = tuple->src.in_addr.s_addr,
+			.daddr = tuple->dst.in_addr.s_addr,
+		};
+		p = mempcpy(p, &ip, sizeof(ip));
+		break;
+	case AF_INET6:
+		ipv6 = (struct ipv6hdr){
+			.version = 6,
+			.hop_limit = IPDEFTTL,
+			.nexthdr = proto,
+			.saddr = tuple->src.in6_addr,
+			.daddr = tuple->dst.in6_addr,
+		};
+		p = mempcpy(p, &ipv6, sizeof(ipv6));
+		break;
+	default:
+		return 0;
+	}
+
+	if (test->conn == UNKNOWN_CONN)
+		sport--;
+
+	switch (test->type) {
+	case TCP:
+		tcp = (struct tcphdr){
+			.source = sport,
+			.dest = tuple->dst.port,
+		};
+		if (test->flags == SYN)
+			tcp.syn = true;
+		if (test->flags == ACK)
+			tcp.ack = true;
+		p = mempcpy(p, &tcp, sizeof(tcp));
+		break;
+	case UDP:
+		udp = (struct udphdr){
+			.source = sport,
+			.dest = tuple->dst.port,
+		};
+		p = mempcpy(p, &udp, sizeof(udp));
+		break;
+	default:
+		return 0;
+	}
+
+	return (void *)p - buf;
+}
+
+static void close_fds(int *fds, int n)
+{
+	int i;
+
+	for (i = 0; i < n; i++)
+		if (fds[i] > 0)
+			close(fds[i]);
+}
+
+void test_cls_redirect(void)
+{
+	struct test_cls_redirect *skel = NULL;
+	struct bpf_prog_test_run_attr tattr = {};
+	int families[] = { AF_INET, AF_INET6 };
+	struct sockaddr_storage ss;
+	struct sockaddr *addr;
+	socklen_t slen;
+	int i, j, err;
+
+	int servers[__NR_KIND][ARRAY_SIZE(families)] = {};
+	int conns[__NR_KIND][ARRAY_SIZE(families)] = {};
+	struct tuple tuples[__NR_KIND][ARRAY_SIZE(families)];
+
+	skel = test_cls_redirect__open();
+	if (CHECK_FAIL(!skel))
+		return;
+
+	skel->rodata->ENCAPSULATION_IP = htonl(ENCAP_IP);
+	skel->rodata->ENCAPSULATION_PORT = htons(ENCAP_PORT);
+
+	if (CHECK_FAIL(test_cls_redirect__load(skel)))
+		goto cleanup;
+
+	addr = (struct sockaddr *)&ss;
+	for (i = 0; i < ARRAY_SIZE(families); i++) {
+		slen = prepare_addr(&ss, families[i]);
+		if (CHECK_FAIL(!slen))
+			goto cleanup;
+
+		if (CHECK_FAIL(!set_up_conn(addr, slen, SOCK_DGRAM,
+					    &servers[UDP][i], &conns[UDP][i],
+					    &tuples[UDP][i])))
+			goto cleanup;
+
+		if (CHECK_FAIL(!set_up_conn(addr, slen, SOCK_STREAM,
+					    &servers[TCP][i], &conns[TCP][i],
+					    &tuples[TCP][i])))
+			goto cleanup;
+	}
+
+	tattr.prog_fd = bpf_program__fd(skel->progs.cls_redirect);
+	for (i = 0; i < ARRAY_SIZE(tests); i++) {
+		struct test_cfg *test = &tests[i];
+
+		for (j = 0; j < ARRAY_SIZE(families); j++) {
+			struct tuple *tuple = &tuples[test->type][j];
+			char input[256];
+			char tmp[256];
+
+			test_str(tmp, sizeof(tmp), test, tuple->family);
+			if (!test__start_subtest(tmp))
+				continue;
+
+			tattr.data_out = tmp;
+			tattr.data_size_out = sizeof(tmp);
+
+			tattr.data_in = input;
+			tattr.data_size_in = build_input(test, input, tuple);
+			if (CHECK_FAIL(!tattr.data_size_in))
+				continue;
+
+			err = bpf_prog_test_run_xattr(&tattr);
+			if (CHECK_FAIL(err))
+				continue;
+
+			if (tattr.retval != TC_ACT_REDIRECT) {
+				PRINT_FAIL("expected TC_ACT_REDIRECT, got %d\n",
+					   tattr.retval);
+				continue;
+			}
+
+			switch (test->result) {
+			case ACCEPT:
+				if (CHECK_FAIL(!was_decapsulated(&tattr)))
+					continue;
+				break;
+			case FORWARD:
+				if (CHECK_FAIL(was_decapsulated(&tattr)))
+					continue;
+				break;
+			default:
+				PRINT_FAIL("unknown result %d\n", test->result);
+				continue;
+			}
+		}
+	}
+
+cleanup:
+	test_cls_redirect__destroy(skel);
+	close_fds((int *)servers, sizeof(servers) / sizeof(servers[0][0]));
+	close_fds((int *)conns, sizeof(conns) / sizeof(conns[0][0]));
+}
diff --git a/tools/testing/selftests/bpf/prog_tests/core_reloc.c b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
index 31e177adbdf1..084ed26a7d78 100644
--- a/tools/testing/selftests/bpf/prog_tests/core_reloc.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
@@ -392,7 +392,7 @@ static struct core_reloc_test_case test_cases[] = {
 		.input = STRUCT_TO_CHAR_PTR(core_reloc_existence___minimal) {
 			.a = 42,
 		},
-		.input_len = sizeof(struct core_reloc_existence),
+		.input_len = sizeof(struct core_reloc_existence___minimal),
 		.output = STRUCT_TO_CHAR_PTR(core_reloc_existence_output) {
 			.a_exists = 1,
 			.b_exists = 0,
diff --git a/tools/testing/selftests/bpf/prog_tests/hashmap.c b/tools/testing/selftests/bpf/prog_tests/hashmap.c
new file mode 100644
index 000000000000..428d488830c6
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/hashmap.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+
+/*
+ * Tests for libbpf's hashmap.
+ *
+ * Copyright (c) 2019 Facebook
+ */
+#include "test_progs.h"
+#include "bpf/hashmap.h"
+
+static int duration = 0;
+
+static size_t hash_fn(const void *k, void *ctx)
+{
+	return (long)k;
+}
+
+static bool equal_fn(const void *a, const void *b, void *ctx)
+{
+	return (long)a == (long)b;
+}
+
+static inline size_t next_pow_2(size_t n)
+{
+	size_t r = 1;
+
+	while (r < n)
+		r <<= 1;
+	return r;
+}
+
+static inline size_t exp_cap(size_t sz)
+{
+	size_t r = next_pow_2(sz);
+
+	if (sz * 4 / 3 > r)
+		r <<= 1;
+	return r;
+}
+
+#define ELEM_CNT 62
+
+static void test_hashmap_generic(void)
+{
+	struct hashmap_entry *entry, *tmp;
+	int err, bkt, found_cnt, i;
+	long long found_msk;
+	struct hashmap *map;
+
+	map = hashmap__new(hash_fn, equal_fn, NULL);
+	if (CHECK(IS_ERR(map), "hashmap__new",
+		  "failed to create map: %ld\n", PTR_ERR(map)))
+		return;
+
+	for (i = 0; i < ELEM_CNT; i++) {
+		const void *oldk, *k = (const void *)(long)i;
+		void *oldv, *v = (void *)(long)(1024 + i);
+
+		err = hashmap__update(map, k, v, &oldk, &oldv);
+		if (CHECK(err != -ENOENT, "hashmap__update",
+			  "unexpected result: %d\n", err))
+			goto cleanup;
+
+		if (i % 2) {
+			err = hashmap__add(map, k, v);
+		} else {
+			err = hashmap__set(map, k, v, &oldk, &oldv);
+			if (CHECK(oldk != NULL || oldv != NULL, "check_kv",
+				  "unexpected k/v: %p=%p\n", oldk, oldv))
+				goto cleanup;
+		}
+
+		if (CHECK(err, "elem_add", "failed to add k/v %ld = %ld: %d\n",
+			       (long)k, (long)v, err))
+			goto cleanup;
+
+		if (CHECK(!hashmap__find(map, k, &oldv), "elem_find",
+			  "failed to find key %ld\n", (long)k))
+			goto cleanup;
+		if (CHECK(oldv != v, "elem_val",
+			  "found value is wrong: %ld\n", (long)oldv))
+			goto cleanup;
+	}
+
+	if (CHECK(hashmap__size(map) != ELEM_CNT, "hashmap__size",
+		  "invalid map size: %zu\n", hashmap__size(map)))
+		goto cleanup;
+	if (CHECK(hashmap__capacity(map) != exp_cap(hashmap__size(map)),
+		  "hashmap_cap",
+		  "unexpected map capacity: %zu\n", hashmap__capacity(map)))
+		goto cleanup;
+
+	found_msk = 0;
+	hashmap__for_each_entry(map, entry, bkt) {
+		long k = (long)entry->key;
+		long v = (long)entry->value;
+
+		found_msk |= 1ULL << k;
+		if (CHECK(v - k != 1024, "check_kv",
+			  "invalid k/v pair: %ld = %ld\n", k, v))
+			goto cleanup;
+	}
+	if (CHECK(found_msk != (1ULL << ELEM_CNT) - 1, "elem_cnt",
+		  "not all keys iterated: %llx\n", found_msk))
+		goto cleanup;
+
+	for (i = 0; i < ELEM_CNT; i++) {
+		const void *oldk, *k = (const void *)(long)i;
+		void *oldv, *v = (void *)(long)(256 + i);
+
+		err = hashmap__add(map, k, v);
+		if (CHECK(err != -EEXIST, "hashmap__add",
+			  "unexpected add result: %d\n", err))
+			goto cleanup;
+
+		if (i % 2)
+			err = hashmap__update(map, k, v, &oldk, &oldv);
+		else
+			err = hashmap__set(map, k, v, &oldk, &oldv);
+
+		if (CHECK(err, "elem_upd",
+			  "failed to update k/v %ld = %ld: %d\n",
+			  (long)k, (long)v, err))
+			goto cleanup;
+		if (CHECK(!hashmap__find(map, k, &oldv), "elem_find",
+			  "failed to find key %ld\n", (long)k))
+			goto cleanup;
+		if (CHECK(oldv != v, "elem_val",
+			  "found value is wrong: %ld\n", (long)oldv))
+			goto cleanup;
+	}
+
+	if (CHECK(hashmap__size(map) != ELEM_CNT, "hashmap__size",
+		  "invalid updated map size: %zu\n", hashmap__size(map)))
+		goto cleanup;
+	if (CHECK(hashmap__capacity(map) != exp_cap(hashmap__size(map)),
+		  "hashmap__capacity",
+		  "unexpected map capacity: %zu\n", hashmap__capacity(map)))
+		goto cleanup;
+
+	found_msk = 0;
+	hashmap__for_each_entry_safe(map, entry, tmp, bkt) {
+		long k = (long)entry->key;
+		long v = (long)entry->value;
+
+		found_msk |= 1ULL << k;
+		if (CHECK(v - k != 256, "elem_check",
+			  "invalid updated k/v pair: %ld = %ld\n", k, v))
+			goto cleanup;
+	}
+	if (CHECK(found_msk != (1ULL << ELEM_CNT) - 1, "elem_cnt",
+		  "not all keys iterated after update: %llx\n", found_msk))
+		goto cleanup;
+
+	found_cnt = 0;
+	hashmap__for_each_key_entry(map, entry, (void *)0) {
+		found_cnt++;
+	}
+	if (CHECK(!found_cnt, "found_cnt",
+		  "didn't find any entries for key 0\n"))
+		goto cleanup;
+
+	found_msk = 0;
+	found_cnt = 0;
+	hashmap__for_each_key_entry_safe(map, entry, tmp, (void *)0) {
+		const void *oldk, *k;
+		void *oldv, *v;
+
+		k = entry->key;
+		v = entry->value;
+
+		found_cnt++;
+		found_msk |= 1ULL << (long)k;
+
+		if (CHECK(!hashmap__delete(map, k, &oldk, &oldv), "elem_del",
+			  "failed to delete k/v %ld = %ld\n",
+			  (long)k, (long)v))
+			goto cleanup;
+		if (CHECK(oldk != k || oldv != v, "check_old",
+			  "invalid deleted k/v: expected %ld = %ld, got %ld = %ld\n",
+			  (long)k, (long)v, (long)oldk, (long)oldv))
+			goto cleanup;
+		if (CHECK(hashmap__delete(map, k, &oldk, &oldv), "elem_del",
+			  "unexpectedly deleted k/v %ld = %ld\n",
+			  (long)oldk, (long)oldv))
+			goto cleanup;
+	}
+
+	if (CHECK(!found_cnt || !found_msk, "found_entries",
+		  "didn't delete any key entries\n"))
+		goto cleanup;
+	if (CHECK(hashmap__size(map) != ELEM_CNT - found_cnt, "elem_cnt",
+		  "invalid updated map size (already deleted: %d): %zu\n",
+		  found_cnt, hashmap__size(map)))
+		goto cleanup;
+	if (CHECK(hashmap__capacity(map) != exp_cap(hashmap__size(map)),
+		  "hashmap__capacity",
+		  "unexpected map capacity: %zu\n", hashmap__capacity(map)))
+		goto cleanup;
+
+	hashmap__for_each_entry_safe(map, entry, tmp, bkt) {
+		const void *oldk, *k;
+		void *oldv, *v;
+
+		k = entry->key;
+		v = entry->value;
+
+		found_cnt++;
+		found_msk |= 1ULL << (long)k;
+
+		if (CHECK(!hashmap__delete(map, k, &oldk, &oldv), "elem_del",
+			  "failed to delete k/v %ld = %ld\n",
+			  (long)k, (long)v))
+			goto cleanup;
+		if (CHECK(oldk != k || oldv != v, "elem_check",
+			  "invalid old k/v: expect %ld = %ld, got %ld = %ld\n",
+			  (long)k, (long)v, (long)oldk, (long)oldv))
+			goto cleanup;
+		if (CHECK(hashmap__delete(map, k, &oldk, &oldv), "elem_del",
+			  "unexpectedly deleted k/v %ld = %ld\n",
+			  (long)k, (long)v))
+			goto cleanup;
+	}
+
+	if (CHECK(found_cnt != ELEM_CNT || found_msk != (1ULL << ELEM_CNT) - 1,
+		  "found_cnt",
+		  "not all keys were deleted: found_cnt:%d, found_msk:%llx\n",
+		  found_cnt, found_msk))
+		goto cleanup;
+	if (CHECK(hashmap__size(map) != 0, "hashmap__size",
+		  "invalid updated map size (already deleted: %d): %zu\n",
+		  found_cnt, hashmap__size(map)))
+		goto cleanup;
+
+	found_cnt = 0;
+	hashmap__for_each_entry(map, entry, bkt) {
+		CHECK(false, "elem_exists",
+		      "unexpected map entries left: %ld = %ld\n",
+		      (long)entry->key, (long)entry->value);
+		goto cleanup;
+	}
+
+	hashmap__clear(map);
+	hashmap__for_each_entry(map, entry, bkt) {
+		CHECK(false, "elem_exists",
+		      "unexpected map entries left: %ld = %ld\n",
+		      (long)entry->key, (long)entry->value);
+		goto cleanup;
+	}
+
+cleanup:
+	hashmap__free(map);
+}
+
+static size_t collision_hash_fn(const void *k, void *ctx)
+{
+	return 0;
+}
+
+static void test_hashmap_multimap(void)
+{
+	void *k1 = (void *)0, *k2 = (void *)1;
+	struct hashmap_entry *entry;
+	struct hashmap *map;
+	long found_msk;
+	int err, bkt;
+
+	/* force collisions */
+	map = hashmap__new(collision_hash_fn, equal_fn, NULL);
+	if (CHECK(IS_ERR(map), "hashmap__new",
+		  "failed to create map: %ld\n", PTR_ERR(map)))
+		return;
+
+	/* set up multimap:
+	 * [0] -> 1, 2, 4;
+	 * [1] -> 8, 16, 32;
+	 */
+	err = hashmap__append(map, k1, (void *)1);
+	if (CHECK(err, "elem_add", "failed to add k/v: %d\n", err))
+		goto cleanup;
+	err = hashmap__append(map, k1, (void *)2);
+	if (CHECK(err, "elem_add", "failed to add k/v: %d\n", err))
+		goto cleanup;
+	err = hashmap__append(map, k1, (void *)4);
+	if (CHECK(err, "elem_add", "failed to add k/v: %d\n", err))
+		goto cleanup;
+
+	err = hashmap__append(map, k2, (void *)8);
+	if (CHECK(err, "elem_add", "failed to add k/v: %d\n", err))
+		goto cleanup;
+	err = hashmap__append(map, k2, (void *)16);
+	if (CHECK(err, "elem_add", "failed to add k/v: %d\n", err))
+		goto cleanup;
+	err = hashmap__append(map, k2, (void *)32);
+	if (CHECK(err, "elem_add", "failed to add k/v: %d\n", err))
+		goto cleanup;
+
+	if (CHECK(hashmap__size(map) != 6, "hashmap_size",
+		  "invalid map size: %zu\n", hashmap__size(map)))
+		goto cleanup;
+
+	/* verify global iteration still works and sees all values */
+	found_msk = 0;
+	hashmap__for_each_entry(map, entry, bkt) {
+		found_msk |= (long)entry->value;
+	}
+	if (CHECK(found_msk != (1 << 6) - 1, "found_msk",
+		  "not all keys iterated: %lx\n", found_msk))
+		goto cleanup;
+
+	/* iterate values for key 1 */
+	found_msk = 0;
+	hashmap__for_each_key_entry(map, entry, k1) {
+		found_msk |= (long)entry->value;
+	}
+	if (CHECK(found_msk != (1 | 2 | 4), "found_msk",
+		  "invalid k1 values: %lx\n", found_msk))
+		goto cleanup;
+
+	/* iterate values for key 2 */
+	found_msk = 0;
+	hashmap__for_each_key_entry(map, entry, k2) {
+		found_msk |= (long)entry->value;
+	}
+	if (CHECK(found_msk != (8 | 16 | 32), "found_msk",
+		  "invalid k2 values: %lx\n", found_msk))
+		goto cleanup;
+
+cleanup:
+	hashmap__free(map);
+}
+
+static void test_hashmap_empty()
+{
+	struct hashmap_entry *entry;
+	int bkt;
+	struct hashmap *map;
+	void *k = (void *)0;
+
+	/* force collisions */
+	map = hashmap__new(hash_fn, equal_fn, NULL);
+	if (CHECK(IS_ERR(map), "hashmap__new",
+		  "failed to create map: %ld\n", PTR_ERR(map)))
+		goto cleanup;
+
+	if (CHECK(hashmap__size(map) != 0, "hashmap__size",
+		  "invalid map size: %zu\n", hashmap__size(map)))
+		goto cleanup;
+	if (CHECK(hashmap__capacity(map) != 0, "hashmap__capacity",
+		  "invalid map capacity: %zu\n", hashmap__capacity(map)))
+		goto cleanup;
+	if (CHECK(hashmap__find(map, k, NULL), "elem_find",
+		  "unexpected find\n"))
+		goto cleanup;
+	if (CHECK(hashmap__delete(map, k, NULL, NULL), "elem_del",
+		  "unexpected delete\n"))
+		goto cleanup;
+
+	hashmap__for_each_entry(map, entry, bkt) {
+		CHECK(false, "elem_found", "unexpected iterated entry\n");
+		goto cleanup;
+	}
+	hashmap__for_each_key_entry(map, entry, k) {
+		CHECK(false, "key_found", "unexpected key entry\n");
+		goto cleanup;
+	}
+
+cleanup:
+	hashmap__free(map);
+}
+
+void test_hashmap()
+{
+	if (test__start_subtest("generic"))
+		test_hashmap_generic();
+	if (test__start_subtest("multimap"))
+		test_hashmap_multimap();
+	if (test__start_subtest("empty"))
+		test_hashmap_empty();
+}
diff --git a/tools/testing/selftests/bpf/prog_tests/ns_current_pid_tgid.c b/tools/testing/selftests/bpf/prog_tests/ns_current_pid_tgid.c
index 542240e16564..e74dc501b27f 100644
--- a/tools/testing/selftests/bpf/prog_tests/ns_current_pid_tgid.c
+++ b/tools/testing/selftests/bpf/prog_tests/ns_current_pid_tgid.c
@@ -80,9 +80,6 @@ void test_ns_current_pid_tgid(void)
 		  "User pid/tgid %llu BPF pid/tgid %llu\n", id, bss.pid_tgid))
 		goto cleanup;
 cleanup:
-	if (!link) {
-		bpf_link__destroy(link);
-		link = NULL;
-	}
+	bpf_link__destroy(link);
 	bpf_object__close(obj);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/perf_buffer.c b/tools/testing/selftests/bpf/prog_tests/perf_buffer.c
index 1450ea2dd4cc..a122ce3b360e 100644
--- a/tools/testing/selftests/bpf/prog_tests/perf_buffer.c
+++ b/tools/testing/selftests/bpf/prog_tests/perf_buffer.c
@@ -6,6 +6,11 @@
 #include <test_progs.h>
 #include "bpf/libbpf_internal.h"
 
+/* AddressSanitizer sometimes crashes due to data dereference below, due to
+ * this being mmap()'ed memory. Disable instrumentation with
+ * no_sanitize_address attribute
+ */
+__attribute__((no_sanitize_address))
 static void on_sample(void *ctx, int cpu, void *data, __u32 size)
 {
 	int cpu_data = *(int *)data, duration = 0;
diff --git a/tools/testing/selftests/bpf/prog_tests/sk_assign.c b/tools/testing/selftests/bpf/prog_tests/sk_assign.c
index d572e1a2c297..47fa04adc147 100644
--- a/tools/testing/selftests/bpf/prog_tests/sk_assign.c
+++ b/tools/testing/selftests/bpf/prog_tests/sk_assign.c
@@ -20,6 +20,7 @@
 #define CONNECT_PORT 4321
 #define TEST_DADDR (0xC0A80203)
 #define NS_SELF "/proc/self/ns/net"
+#define SERVER_MAP_PATH "/sys/fs/bpf/tc/globals/server_map"
 
 static const struct timeval timeo_sec = { .tv_sec = 3 };
 static const size_t timeo_optlen = sizeof(timeo_sec);
@@ -265,6 +266,7 @@ void test_sk_assign(void)
 		TEST("ipv6 udp addr redir", AF_INET6, SOCK_DGRAM, true),
 	};
 	int server = -1;
+	int server_map;
 	int self_net;
 
 	self_net = open(NS_SELF, O_RDONLY);
@@ -278,9 +280,17 @@ void test_sk_assign(void)
 		goto cleanup;
 	}
 
+	server_map = bpf_obj_get(SERVER_MAP_PATH);
+	if (CHECK_FAIL(server_map < 0)) {
+		perror("Unable to open " SERVER_MAP_PATH);
+		goto cleanup;
+	}
+
 	for (int i = 0; i < ARRAY_SIZE(tests) && !READ_ONCE(stop); i++) {
 		struct test_sk_cfg *test = &tests[i];
 		const struct sockaddr *addr;
+		const int zero = 0;
+		int err;
 
 		if (!test__start_subtest(test->name))
 			continue;
@@ -288,7 +298,13 @@ void test_sk_assign(void)
 		addr = (const struct sockaddr *)test->addr;
 		server = start_server(addr, test->len, test->type);
 		if (server == -1)
-			goto cleanup;
+			goto close;
+
+		err = bpf_map_update_elem(server_map, &zero, &server, BPF_ANY);
+		if (CHECK_FAIL(err)) {
+			perror("Unable to update server_map");
+			goto close;
+		}
 
 		/* connect to unbound ports */
 		prepare_addr(test->addr, test->family, CONNECT_PORT,
@@ -302,7 +318,10 @@ void test_sk_assign(void)
 
 close:
 	close(server);
+	close(server_map);
 cleanup:
+	if (CHECK_FAIL(unlink(SERVER_MAP_PATH)))
+		perror("Unable to unlink " SERVER_MAP_PATH);
 	if (CHECK_FAIL(setns(self_net, CLONE_NEWNET)))
 		perror("Failed to setns("NS_SELF")");
 	close(self_net);
diff --git a/tools/testing/selftests/bpf/progs/core_reloc_types.h b/tools/testing/selftests/bpf/progs/core_reloc_types.h
index 6d598cfbdb3e..34d84717c946 100644
--- a/tools/testing/selftests/bpf/progs/core_reloc_types.h
+++ b/tools/testing/selftests/bpf/progs/core_reloc_types.h
@@ -379,7 +379,7 @@ struct core_reloc_arrays___equiv_zero_sz_arr {
 	struct core_reloc_arrays_substruct c[3];
 	struct core_reloc_arrays_substruct d[1][2];
 	/* equivalent to flexible array */
-	struct core_reloc_arrays_substruct f[0][2];
+	struct core_reloc_arrays_substruct f[][2];
 };
 
 struct core_reloc_arrays___fixed_arr {
diff --git a/tools/testing/selftests/bpf/progs/test_btf_map_in_map.c b/tools/testing/selftests/bpf/progs/test_btf_map_in_map.c
new file mode 100644
index 000000000000..e5093796be97
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_btf_map_in_map.c
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2020 Facebook */
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+
+struct inner_map {
+	__uint(type, BPF_MAP_TYPE_ARRAY);
+	__uint(max_entries, 1);
+	__type(key, int);
+	__type(value, int);
+} inner_map1 SEC(".maps"),
+  inner_map2 SEC(".maps");
+
+struct outer_arr {
+	__uint(type, BPF_MAP_TYPE_ARRAY_OF_MAPS);
+	__uint(max_entries, 3);
+	__uint(key_size, sizeof(int));
+	__uint(value_size, sizeof(int));
+	/* it's possible to use anonymous struct as inner map definition here */
+	__array(values, struct {
+		__uint(type, BPF_MAP_TYPE_ARRAY);
+		/* changing max_entries to 2 will fail during load
+		 * due to incompatibility with inner_map definition */
+		__uint(max_entries, 1);
+		__type(key, int);
+		__type(value, int);
+	});
+} outer_arr SEC(".maps") = {
+	/* (void *) cast is necessary because we didn't use `struct inner_map`
+	 * in __inner(values, ...)
+	 * Actually, a conscious effort is required to screw up initialization
+	 * of inner map slots, which is a great thing!
+	 */
+	.values = { (void *)&inner_map1, 0, (void *)&inner_map2 },
+};
+
+struct outer_hash {
+	__uint(type, BPF_MAP_TYPE_HASH_OF_MAPS);
+	__uint(max_entries, 5);
+	__uint(key_size, sizeof(int));
+	/* Here everything works flawlessly due to reuse of struct inner_map
+	 * and compiler will complain at the attempt to use non-inner_map
+	 * references below. This is great experience.
+	 */
+	__array(values, struct inner_map);
+} outer_hash SEC(".maps") = {
+	.values = {
+		[0] = &inner_map2,
+		[4] = &inner_map1,
+	},
+};
+
+int input = 0;
+
+SEC("raw_tp/sys_enter")
+int handle__sys_enter(void *ctx)
+{
+	struct inner_map *inner_map;
+	int key = 0, val;
+
+	inner_map = bpf_map_lookup_elem(&outer_arr, &key);
+	if (!inner_map)
+		return 1;
+	val = input;
+	bpf_map_update_elem(inner_map, &key, &val, 0);
+
+	inner_map = bpf_map_lookup_elem(&outer_hash, &key);
+	if (!inner_map)
+		return 1;
+	val = input + 1;
+	bpf_map_update_elem(inner_map, &key, &val, 0);
+
+	return 0;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/test_cls_redirect.c b/tools/testing/selftests/bpf/progs/test_cls_redirect.c
new file mode 100644
index 000000000000..1668b993eb86
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_cls_redirect.c
@@ -0,0 +1,1058 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+// Copyright (c) 2019, 2020 Cloudflare
+
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <linux/bpf.h>
+#include <linux/icmp.h>
+#include <linux/icmpv6.h>
+#include <linux/if_ether.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/pkt_cls.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+
+#include "test_cls_redirect.h"
+
+#define offsetofend(TYPE, MEMBER) \
+	(offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
+
+#define IP_OFFSET_MASK (0x1FFF)
+#define IP_MF (0x2000)
+
+char _license[] SEC("license") = "Dual BSD/GPL";
+
+/**
+ * Destination port and IP used for UDP encapsulation.
+ */
+static volatile const __be16 ENCAPSULATION_PORT;
+static volatile const __be32 ENCAPSULATION_IP;
+
+typedef struct {
+	uint64_t processed_packets_total;
+	uint64_t l3_protocol_packets_total_ipv4;
+	uint64_t l3_protocol_packets_total_ipv6;
+	uint64_t l4_protocol_packets_total_tcp;
+	uint64_t l4_protocol_packets_total_udp;
+	uint64_t accepted_packets_total_syn;
+	uint64_t accepted_packets_total_syn_cookies;
+	uint64_t accepted_packets_total_last_hop;
+	uint64_t accepted_packets_total_icmp_echo_request;
+	uint64_t accepted_packets_total_established;
+	uint64_t forwarded_packets_total_gue;
+	uint64_t forwarded_packets_total_gre;
+
+	uint64_t errors_total_unknown_l3_proto;
+	uint64_t errors_total_unknown_l4_proto;
+	uint64_t errors_total_malformed_ip;
+	uint64_t errors_total_fragmented_ip;
+	uint64_t errors_total_malformed_icmp;
+	uint64_t errors_total_unwanted_icmp;
+	uint64_t errors_total_malformed_icmp_pkt_too_big;
+	uint64_t errors_total_malformed_tcp;
+	uint64_t errors_total_malformed_udp;
+	uint64_t errors_total_icmp_echo_replies;
+	uint64_t errors_total_malformed_encapsulation;
+	uint64_t errors_total_encap_adjust_failed;
+	uint64_t errors_total_encap_buffer_too_small;
+	uint64_t errors_total_redirect_loop;
+} metrics_t;
+
+typedef enum {
+	INVALID = 0,
+	UNKNOWN,
+	ECHO_REQUEST,
+	SYN,
+	SYN_COOKIE,
+	ESTABLISHED,
+} verdict_t;
+
+typedef struct {
+	uint16_t src, dst;
+} flow_ports_t;
+
+_Static_assert(
+	sizeof(flow_ports_t) !=
+		offsetofend(struct bpf_sock_tuple, ipv4.dport) -
+			offsetof(struct bpf_sock_tuple, ipv4.sport) - 1,
+	"flow_ports_t must match sport and dport in struct bpf_sock_tuple");
+_Static_assert(
+	sizeof(flow_ports_t) !=
+		offsetofend(struct bpf_sock_tuple, ipv6.dport) -
+			offsetof(struct bpf_sock_tuple, ipv6.sport) - 1,
+	"flow_ports_t must match sport and dport in struct bpf_sock_tuple");
+
+typedef int ret_t;
+
+/* This is a bit of a hack. We need a return value which allows us to
+ * indicate that the regular flow of the program should continue,
+ * while allowing functions to use XDP_PASS and XDP_DROP, etc.
+ */
+static const ret_t CONTINUE_PROCESSING = -1;
+
+/* Convenience macro to call functions which return ret_t.
+ */
+#define MAYBE_RETURN(x)                           \
+	do {                                      \
+		ret_t __ret = x;                  \
+		if (__ret != CONTINUE_PROCESSING) \
+			return __ret;             \
+	} while (0)
+
+/* Linux packet pointers are either aligned to NET_IP_ALIGN (aka 2 bytes),
+ * or not aligned if the arch supports efficient unaligned access.
+ *
+ * Since the verifier ensures that eBPF packet accesses follow these rules,
+ * we can tell LLVM to emit code as if we always had a larger alignment.
+ * It will yell at us if we end up on a platform where this is not valid.
+ */
+typedef uint8_t *net_ptr __attribute__((align_value(8)));
+
+typedef struct buf {
+	struct __sk_buff *skb;
+	net_ptr head;
+	/* NB: tail musn't have alignment other than 1, otherwise
+	* LLVM will go and eliminate code, e.g. when checking packet lengths.
+	*/
+	uint8_t *const tail;
+} buf_t;
+
+static size_t buf_off(const buf_t *buf)
+{
+	/* Clang seems to optimize constructs like
+	 *    a - b + c
+	 * if c is known:
+	 *    r? = c
+	 *    r? -= b
+	 *    r? += a
+	 *
+	 * This is a problem if a and b are packet pointers,
+	 * since the verifier allows subtracting two pointers to
+	 * get a scalar, but not a scalar and a pointer.
+	 *
+	 * Use inline asm to break this optimization.
+	 */
+	size_t off = (size_t)buf->head;
+	asm("%0 -= %1" : "+r"(off) : "r"(buf->skb->data));
+	return off;
+}
+
+static bool buf_copy(buf_t *buf, void *dst, size_t len)
+{
+	if (bpf_skb_load_bytes(buf->skb, buf_off(buf), dst, len)) {
+		return false;
+	}
+
+	buf->head += len;
+	return true;
+}
+
+static bool buf_skip(buf_t *buf, const size_t len)
+{
+	/* Check whether off + len is valid in the non-linear part. */
+	if (buf_off(buf) + len > buf->skb->len) {
+		return false;
+	}
+
+	buf->head += len;
+	return true;
+}
+
+/* Returns a pointer to the start of buf, or NULL if len is
+ * larger than the remaining data. Consumes len bytes on a successful
+ * call.
+ *
+ * If scratch is not NULL, the function will attempt to load non-linear
+ * data via bpf_skb_load_bytes. On success, scratch is returned.
+ */
+static void *buf_assign(buf_t *buf, const size_t len, void *scratch)
+{
+	if (buf->head + len > buf->tail) {
+		if (scratch == NULL) {
+			return NULL;
+		}
+
+		return buf_copy(buf, scratch, len) ? scratch : NULL;
+	}
+
+	void *ptr = buf->head;
+	buf->head += len;
+	return ptr;
+}
+
+static bool pkt_skip_ipv4_options(buf_t *buf, const struct iphdr *ipv4)
+{
+	if (ipv4->ihl <= 5) {
+		return true;
+	}
+
+	return buf_skip(buf, (ipv4->ihl - 5) * 4);
+}
+
+static bool ipv4_is_fragment(const struct iphdr *ip)
+{
+	uint16_t frag_off = ip->frag_off & bpf_htons(IP_OFFSET_MASK);
+	return (ip->frag_off & bpf_htons(IP_MF)) != 0 || frag_off > 0;
+}
+
+static struct iphdr *pkt_parse_ipv4(buf_t *pkt, struct iphdr *scratch)
+{
+	struct iphdr *ipv4 = buf_assign(pkt, sizeof(*ipv4), scratch);
+	if (ipv4 == NULL) {
+		return NULL;
+	}
+
+	if (ipv4->ihl < 5) {
+		return NULL;
+	}
+
+	if (!pkt_skip_ipv4_options(pkt, ipv4)) {
+		return NULL;
+	}
+
+	return ipv4;
+}
+
+/* Parse the L4 ports from a packet, assuming a layout like TCP or UDP. */
+static bool pkt_parse_icmp_l4_ports(buf_t *pkt, flow_ports_t *ports)
+{
+	if (!buf_copy(pkt, ports, sizeof(*ports))) {
+		return false;
+	}
+
+	/* Ports in the L4 headers are reversed, since we are parsing an ICMP
+	 * payload which is going towards the eyeball.
+	 */
+	uint16_t dst = ports->src;
+	ports->src = ports->dst;
+	ports->dst = dst;
+	return true;
+}
+
+static uint16_t pkt_checksum_fold(uint32_t csum)
+{
+	/* The highest reasonable value for an IPv4 header
+	 * checksum requires two folds, so we just do that always.
+	 */
+	csum = (csum & 0xffff) + (csum >> 16);
+	csum = (csum & 0xffff) + (csum >> 16);
+	return (uint16_t)~csum;
+}
+
+static void pkt_ipv4_checksum(struct iphdr *iph)
+{
+	iph->check = 0;
+
+	/* An IP header without options is 20 bytes. Two of those
+	 * are the checksum, which we always set to zero. Hence,
+	 * the maximum accumulated value is 18 / 2 * 0xffff = 0x8fff7,
+	 * which fits in 32 bit.
+	 */
+	_Static_assert(sizeof(struct iphdr) == 20, "iphdr must be 20 bytes");
+	uint32_t acc = 0;
+	uint16_t *ipw = (uint16_t *)iph;
+
+#pragma clang loop unroll(full)
+	for (size_t i = 0; i < sizeof(struct iphdr) / 2; i++) {
+		acc += ipw[i];
+	}
+
+	iph->check = pkt_checksum_fold(acc);
+}
+
+static bool pkt_skip_ipv6_extension_headers(buf_t *pkt,
+					    const struct ipv6hdr *ipv6,
+					    uint8_t *upper_proto,
+					    bool *is_fragment)
+{
+	/* We understand five extension headers.
+	 * https://tools.ietf.org/html/rfc8200#section-4.1 states that all
+	 * headers should occur once, except Destination Options, which may
+	 * occur twice. Hence we give up after 6 headers.
+	 */
+	struct {
+		uint8_t next;
+		uint8_t len;
+	} exthdr = {
+		.next = ipv6->nexthdr,
+	};
+	*is_fragment = false;
+
+#pragma clang loop unroll(full)
+	for (int i = 0; i < 6; i++) {
+		switch (exthdr.next) {
+		case IPPROTO_FRAGMENT:
+			*is_fragment = true;
+			/* NB: We don't check that hdrlen == 0 as per spec. */
+			/* fallthrough; */
+
+		case IPPROTO_HOPOPTS:
+		case IPPROTO_ROUTING:
+		case IPPROTO_DSTOPTS:
+		case IPPROTO_MH:
+			if (!buf_copy(pkt, &exthdr, sizeof(exthdr))) {
+				return false;
+			}
+
+			/* hdrlen is in 8-octet units, and excludes the first 8 octets. */
+			if (!buf_skip(pkt,
+				      (exthdr.len + 1) * 8 - sizeof(exthdr))) {
+				return false;
+			}
+
+			/* Decode next header */
+			break;
+
+		default:
+			/* The next header is not one of the known extension
+			 * headers, treat it as the upper layer header.
+			 *
+			 * This handles IPPROTO_NONE.
+			 *
+			 * Encapsulating Security Payload (50) and Authentication
+			 * Header (51) also end up here (and will trigger an
+			 * unknown proto error later). They have a custom header
+			 * format and seem too esoteric to care about.
+			 */
+			*upper_proto = exthdr.next;
+			return true;
+		}
+	}
+
+	/* We never found an upper layer header. */
+	return false;
+}
+
+/* This function has to be inlined, because the verifier otherwise rejects it
+ * due to returning a pointer to the stack. This is technically correct, since
+ * scratch is allocated on the stack. However, this usage should be safe since
+ * it's the callers stack after all.
+ */
+static inline __attribute__((__always_inline__)) struct ipv6hdr *
+pkt_parse_ipv6(buf_t *pkt, struct ipv6hdr *scratch, uint8_t *proto,
+	       bool *is_fragment)
+{
+	struct ipv6hdr *ipv6 = buf_assign(pkt, sizeof(*ipv6), scratch);
+	if (ipv6 == NULL) {
+		return NULL;
+	}
+
+	if (!pkt_skip_ipv6_extension_headers(pkt, ipv6, proto, is_fragment)) {
+		return NULL;
+	}
+
+	return ipv6;
+}
+
+/* Global metrics, per CPU
+ */
+struct bpf_map_def metrics_map SEC("maps") = {
+	.type = BPF_MAP_TYPE_PERCPU_ARRAY,
+	.key_size = sizeof(unsigned int),
+	.value_size = sizeof(metrics_t),
+	.max_entries = 1,
+};
+
+static metrics_t *get_global_metrics(void)
+{
+	uint64_t key = 0;
+	return bpf_map_lookup_elem(&metrics_map, &key);
+}
+
+static ret_t accept_locally(struct __sk_buff *skb, encap_headers_t *encap)
+{
+	const int payload_off =
+		sizeof(*encap) +
+		sizeof(struct in_addr) * encap->unigue.hop_count;
+	int32_t encap_overhead = payload_off - sizeof(struct ethhdr);
+
+	// Changing the ethertype if the encapsulated packet is ipv6
+	if (encap->gue.proto_ctype == IPPROTO_IPV6) {
+		encap->eth.h_proto = bpf_htons(ETH_P_IPV6);
+	}
+
+	if (bpf_skb_adjust_room(skb, -encap_overhead, BPF_ADJ_ROOM_MAC,
+				BPF_F_ADJ_ROOM_FIXED_GSO)) {
+		return TC_ACT_SHOT;
+	}
+
+	return bpf_redirect(skb->ifindex, BPF_F_INGRESS);
+}
+
+static ret_t forward_with_gre(struct __sk_buff *skb, encap_headers_t *encap,
+			      struct in_addr *next_hop, metrics_t *metrics)
+{
+	metrics->forwarded_packets_total_gre++;
+
+	const int payload_off =
+		sizeof(*encap) +
+		sizeof(struct in_addr) * encap->unigue.hop_count;
+	int32_t encap_overhead =
+		payload_off - sizeof(struct ethhdr) - sizeof(struct iphdr);
+	int32_t delta = sizeof(struct gre_base_hdr) - encap_overhead;
+	uint16_t proto = ETH_P_IP;
+
+	/* Loop protection: the inner packet's TTL is decremented as a safeguard
+	 * against any forwarding loop. As the only interesting field is the TTL
+	 * hop limit for IPv6, it is easier to use bpf_skb_load_bytes/bpf_skb_store_bytes
+	 * as they handle the split packets if needed (no need for the data to be
+	 * in the linear section).
+	 */
+	if (encap->gue.proto_ctype == IPPROTO_IPV6) {
+		proto = ETH_P_IPV6;
+		uint8_t ttl;
+		int rc;
+
+		rc = bpf_skb_load_bytes(
+			skb, payload_off + offsetof(struct ipv6hdr, hop_limit),
+			&ttl, 1);
+		if (rc != 0) {
+			metrics->errors_total_malformed_encapsulation++;
+			return TC_ACT_SHOT;
+		}
+
+		if (ttl == 0) {
+			metrics->errors_total_redirect_loop++;
+			return TC_ACT_SHOT;
+		}
+
+		ttl--;
+		rc = bpf_skb_store_bytes(
+			skb, payload_off + offsetof(struct ipv6hdr, hop_limit),
+			&ttl, 1, 0);
+		if (rc != 0) {
+			metrics->errors_total_malformed_encapsulation++;
+			return TC_ACT_SHOT;
+		}
+	} else {
+		uint8_t ttl;
+		int rc;
+
+		rc = bpf_skb_load_bytes(
+			skb, payload_off + offsetof(struct iphdr, ttl), &ttl,
+			1);
+		if (rc != 0) {
+			metrics->errors_total_malformed_encapsulation++;
+			return TC_ACT_SHOT;
+		}
+
+		if (ttl == 0) {
+			metrics->errors_total_redirect_loop++;
+			return TC_ACT_SHOT;
+		}
+
+		/* IPv4 also has a checksum to patch. While the TTL is only one byte,
+		 * this function only works for 2 and 4 bytes arguments (the result is
+		 * the same).
+		 */
+		rc = bpf_l3_csum_replace(
+			skb, payload_off + offsetof(struct iphdr, check), ttl,
+			ttl - 1, 2);
+		if (rc != 0) {
+			metrics->errors_total_malformed_encapsulation++;
+			return TC_ACT_SHOT;
+		}
+
+		ttl--;
+		rc = bpf_skb_store_bytes(
+			skb, payload_off + offsetof(struct iphdr, ttl), &ttl, 1,
+			0);
+		if (rc != 0) {
+			metrics->errors_total_malformed_encapsulation++;
+			return TC_ACT_SHOT;
+		}
+	}
+
+	if (bpf_skb_adjust_room(skb, delta, BPF_ADJ_ROOM_NET,
+				BPF_F_ADJ_ROOM_FIXED_GSO)) {
+		metrics->errors_total_encap_adjust_failed++;
+		return TC_ACT_SHOT;
+	}
+
+	if (bpf_skb_pull_data(skb, sizeof(encap_gre_t))) {
+		metrics->errors_total_encap_buffer_too_small++;
+		return TC_ACT_SHOT;
+	}
+
+	buf_t pkt = {
+		.skb = skb,
+		.head = (uint8_t *)(long)skb->data,
+		.tail = (uint8_t *)(long)skb->data_end,
+	};
+
+	encap_gre_t *encap_gre = buf_assign(&pkt, sizeof(encap_gre_t), NULL);
+	if (encap_gre == NULL) {
+		metrics->errors_total_encap_buffer_too_small++;
+		return TC_ACT_SHOT;
+	}
+
+	encap_gre->ip.protocol = IPPROTO_GRE;
+	encap_gre->ip.daddr = next_hop->s_addr;
+	encap_gre->ip.saddr = ENCAPSULATION_IP;
+	encap_gre->ip.tot_len =
+		bpf_htons(bpf_ntohs(encap_gre->ip.tot_len) + delta);
+	encap_gre->gre.flags = 0;
+	encap_gre->gre.protocol = bpf_htons(proto);
+	pkt_ipv4_checksum((void *)&encap_gre->ip);
+
+	return bpf_redirect(skb->ifindex, 0);
+}
+
+static ret_t forward_to_next_hop(struct __sk_buff *skb, encap_headers_t *encap,
+				 struct in_addr *next_hop, metrics_t *metrics)
+{
+	/* swap L2 addresses */
+	/* This assumes that packets are received from a router.
+	 * So just swapping the MAC addresses here will make the packet go back to
+	 * the router, which will send it to the appropriate machine.
+	 */
+	unsigned char temp[ETH_ALEN];
+	memcpy(temp, encap->eth.h_dest, sizeof(temp));
+	memcpy(encap->eth.h_dest, encap->eth.h_source,
+	       sizeof(encap->eth.h_dest));
+	memcpy(encap->eth.h_source, temp, sizeof(encap->eth.h_source));
+
+	if (encap->unigue.next_hop == encap->unigue.hop_count - 1 &&
+	    encap->unigue.last_hop_gre) {
+		return forward_with_gre(skb, encap, next_hop, metrics);
+	}
+
+	metrics->forwarded_packets_total_gue++;
+	uint32_t old_saddr = encap->ip.saddr;
+	encap->ip.saddr = encap->ip.daddr;
+	encap->ip.daddr = next_hop->s_addr;
+	if (encap->unigue.next_hop < encap->unigue.hop_count) {
+		encap->unigue.next_hop++;
+	}
+
+	/* Remove ip->saddr, add next_hop->s_addr */
+	const uint64_t off = offsetof(typeof(*encap), ip.check);
+	int ret = bpf_l3_csum_replace(skb, off, old_saddr, next_hop->s_addr, 4);
+	if (ret < 0) {
+		return TC_ACT_SHOT;
+	}
+
+	return bpf_redirect(skb->ifindex, 0);
+}
+
+static ret_t skip_next_hops(buf_t *pkt, int n)
+{
+	switch (n) {
+	case 1:
+		if (!buf_skip(pkt, sizeof(struct in_addr)))
+			return TC_ACT_SHOT;
+	case 0:
+		return CONTINUE_PROCESSING;
+
+	default:
+		return TC_ACT_SHOT;
+	}
+}
+
+/* Get the next hop from the GLB header.
+ *
+ * Sets next_hop->s_addr to 0 if there are no more hops left.
+ * pkt is positioned just after the variable length GLB header
+ * iff the call is successful.
+ */
+static ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap,
+			  struct in_addr *next_hop)
+{
+	if (encap->unigue.next_hop > encap->unigue.hop_count) {
+		return TC_ACT_SHOT;
+	}
+
+	/* Skip "used" next hops. */
+	MAYBE_RETURN(skip_next_hops(pkt, encap->unigue.next_hop));
+
+	if (encap->unigue.next_hop == encap->unigue.hop_count) {
+		/* No more next hops, we are at the end of the GLB header. */
+		next_hop->s_addr = 0;
+		return CONTINUE_PROCESSING;
+	}
+
+	if (!buf_copy(pkt, next_hop, sizeof(*next_hop))) {
+		return TC_ACT_SHOT;
+	}
+
+	/* Skip the remainig next hops (may be zero). */
+	return skip_next_hops(pkt, encap->unigue.hop_count -
+					   encap->unigue.next_hop - 1);
+}
+
+/* Fill a bpf_sock_tuple to be used with the socket lookup functions.
+ * This is a kludge that let's us work around verifier limitations:
+ *
+ *    fill_tuple(&t, foo, sizeof(struct iphdr), 123, 321)
+ *
+ * clang will substitue a costant for sizeof, which allows the verifier
+ * to track it's value. Based on this, it can figure out the constant
+ * return value, and calling code works while still being "generic" to
+ * IPv4 and IPv6.
+ */
+static uint64_t fill_tuple(struct bpf_sock_tuple *tuple, void *iph,
+			   uint64_t iphlen, uint16_t sport, uint16_t dport)
+{
+	switch (iphlen) {
+	case sizeof(struct iphdr): {
+		struct iphdr *ipv4 = (struct iphdr *)iph;
+		tuple->ipv4.daddr = ipv4->daddr;
+		tuple->ipv4.saddr = ipv4->saddr;
+		tuple->ipv4.sport = sport;
+		tuple->ipv4.dport = dport;
+		return sizeof(tuple->ipv4);
+	}
+
+	case sizeof(struct ipv6hdr): {
+		struct ipv6hdr *ipv6 = (struct ipv6hdr *)iph;
+		memcpy(&tuple->ipv6.daddr, &ipv6->daddr,
+		       sizeof(tuple->ipv6.daddr));
+		memcpy(&tuple->ipv6.saddr, &ipv6->saddr,
+		       sizeof(tuple->ipv6.saddr));
+		tuple->ipv6.sport = sport;
+		tuple->ipv6.dport = dport;
+		return sizeof(tuple->ipv6);
+	}
+
+	default:
+		return 0;
+	}
+}
+
+static verdict_t classify_tcp(struct __sk_buff *skb,
+			      struct bpf_sock_tuple *tuple, uint64_t tuplen,
+			      void *iph, struct tcphdr *tcp)
+{
+	struct bpf_sock *sk =
+		bpf_skc_lookup_tcp(skb, tuple, tuplen, BPF_F_CURRENT_NETNS, 0);
+	if (sk == NULL) {
+		return UNKNOWN;
+	}
+
+	if (sk->state != BPF_TCP_LISTEN) {
+		bpf_sk_release(sk);
+		return ESTABLISHED;
+	}
+
+	if (iph != NULL && tcp != NULL) {
+		/* Kludge: we've run out of arguments, but need the length of the ip header. */
+		uint64_t iphlen = sizeof(struct iphdr);
+		if (tuplen == sizeof(tuple->ipv6)) {
+			iphlen = sizeof(struct ipv6hdr);
+		}
+
+		if (bpf_tcp_check_syncookie(sk, iph, iphlen, tcp,
+					    sizeof(*tcp)) == 0) {
+			bpf_sk_release(sk);
+			return SYN_COOKIE;
+		}
+	}
+
+	bpf_sk_release(sk);
+	return UNKNOWN;
+}
+
+static verdict_t classify_udp(struct __sk_buff *skb,
+			      struct bpf_sock_tuple *tuple, uint64_t tuplen)
+{
+	struct bpf_sock *sk =
+		bpf_sk_lookup_udp(skb, tuple, tuplen, BPF_F_CURRENT_NETNS, 0);
+	if (sk == NULL) {
+		return UNKNOWN;
+	}
+
+	if (sk->state == BPF_TCP_ESTABLISHED) {
+		bpf_sk_release(sk);
+		return ESTABLISHED;
+	}
+
+	bpf_sk_release(sk);
+	return UNKNOWN;
+}
+
+static verdict_t classify_icmp(struct __sk_buff *skb, uint8_t proto,
+			       struct bpf_sock_tuple *tuple, uint64_t tuplen,
+			       metrics_t *metrics)
+{
+	switch (proto) {
+	case IPPROTO_TCP:
+		return classify_tcp(skb, tuple, tuplen, NULL, NULL);
+
+	case IPPROTO_UDP:
+		return classify_udp(skb, tuple, tuplen);
+
+	default:
+		metrics->errors_total_malformed_icmp++;
+		return INVALID;
+	}
+}
+
+static verdict_t process_icmpv4(buf_t *pkt, metrics_t *metrics)
+{
+	struct icmphdr icmp;
+	if (!buf_copy(pkt, &icmp, sizeof(icmp))) {
+		metrics->errors_total_malformed_icmp++;
+		return INVALID;
+	}
+
+	/* We should never receive encapsulated echo replies. */
+	if (icmp.type == ICMP_ECHOREPLY) {
+		metrics->errors_total_icmp_echo_replies++;
+		return INVALID;
+	}
+
+	if (icmp.type == ICMP_ECHO) {
+		return ECHO_REQUEST;
+	}
+
+	if (icmp.type != ICMP_DEST_UNREACH || icmp.code != ICMP_FRAG_NEEDED) {
+		metrics->errors_total_unwanted_icmp++;
+		return INVALID;
+	}
+
+	struct iphdr _ip4;
+	const struct iphdr *ipv4 = pkt_parse_ipv4(pkt, &_ip4);
+	if (ipv4 == NULL) {
+		metrics->errors_total_malformed_icmp_pkt_too_big++;
+		return INVALID;
+	}
+
+	/* The source address in the outer IP header is from the entity that
+	 * originated the ICMP message. Use the original IP header to restore
+	 * the correct flow tuple.
+	 */
+	struct bpf_sock_tuple tuple;
+	tuple.ipv4.saddr = ipv4->daddr;
+	tuple.ipv4.daddr = ipv4->saddr;
+
+	if (!pkt_parse_icmp_l4_ports(pkt, (flow_ports_t *)&tuple.ipv4.sport)) {
+		metrics->errors_total_malformed_icmp_pkt_too_big++;
+		return INVALID;
+	}
+
+	return classify_icmp(pkt->skb, ipv4->protocol, &tuple,
+			     sizeof(tuple.ipv4), metrics);
+}
+
+static verdict_t process_icmpv6(buf_t *pkt, metrics_t *metrics)
+{
+	struct icmp6hdr icmp6;
+	if (!buf_copy(pkt, &icmp6, sizeof(icmp6))) {
+		metrics->errors_total_malformed_icmp++;
+		return INVALID;
+	}
+
+	/* We should never receive encapsulated echo replies. */
+	if (icmp6.icmp6_type == ICMPV6_ECHO_REPLY) {
+		metrics->errors_total_icmp_echo_replies++;
+		return INVALID;
+	}
+
+	if (icmp6.icmp6_type == ICMPV6_ECHO_REQUEST) {
+		return ECHO_REQUEST;
+	}
+
+	if (icmp6.icmp6_type != ICMPV6_PKT_TOOBIG) {
+		metrics->errors_total_unwanted_icmp++;
+		return INVALID;
+	}
+
+	bool is_fragment;
+	uint8_t l4_proto;
+	struct ipv6hdr _ipv6;
+	const struct ipv6hdr *ipv6 =
+		pkt_parse_ipv6(pkt, &_ipv6, &l4_proto, &is_fragment);
+	if (ipv6 == NULL) {
+		metrics->errors_total_malformed_icmp_pkt_too_big++;
+		return INVALID;
+	}
+
+	if (is_fragment) {
+		metrics->errors_total_fragmented_ip++;
+		return INVALID;
+	}
+
+	/* Swap source and dest addresses. */
+	struct bpf_sock_tuple tuple;
+	memcpy(&tuple.ipv6.saddr, &ipv6->daddr, sizeof(tuple.ipv6.saddr));
+	memcpy(&tuple.ipv6.daddr, &ipv6->saddr, sizeof(tuple.ipv6.daddr));
+
+	if (!pkt_parse_icmp_l4_ports(pkt, (flow_ports_t *)&tuple.ipv6.sport)) {
+		metrics->errors_total_malformed_icmp_pkt_too_big++;
+		return INVALID;
+	}
+
+	return classify_icmp(pkt->skb, l4_proto, &tuple, sizeof(tuple.ipv6),
+			     metrics);
+}
+
+static verdict_t process_tcp(buf_t *pkt, void *iph, uint64_t iphlen,
+			     metrics_t *metrics)
+{
+	metrics->l4_protocol_packets_total_tcp++;
+
+	struct tcphdr _tcp;
+	struct tcphdr *tcp = buf_assign(pkt, sizeof(_tcp), &_tcp);
+	if (tcp == NULL) {
+		metrics->errors_total_malformed_tcp++;
+		return INVALID;
+	}
+
+	if (tcp->syn) {
+		return SYN;
+	}
+
+	struct bpf_sock_tuple tuple;
+	uint64_t tuplen =
+		fill_tuple(&tuple, iph, iphlen, tcp->source, tcp->dest);
+	return classify_tcp(pkt->skb, &tuple, tuplen, iph, tcp);
+}
+
+static verdict_t process_udp(buf_t *pkt, void *iph, uint64_t iphlen,
+			     metrics_t *metrics)
+{
+	metrics->l4_protocol_packets_total_udp++;
+
+	struct udphdr _udp;
+	struct udphdr *udph = buf_assign(pkt, sizeof(_udp), &_udp);
+	if (udph == NULL) {
+		metrics->errors_total_malformed_udp++;
+		return INVALID;
+	}
+
+	struct bpf_sock_tuple tuple;
+	uint64_t tuplen =
+		fill_tuple(&tuple, iph, iphlen, udph->source, udph->dest);
+	return classify_udp(pkt->skb, &tuple, tuplen);
+}
+
+static verdict_t process_ipv4(buf_t *pkt, metrics_t *metrics)
+{
+	metrics->l3_protocol_packets_total_ipv4++;
+
+	struct iphdr _ip4;
+	struct iphdr *ipv4 = pkt_parse_ipv4(pkt, &_ip4);
+	if (ipv4 == NULL) {
+		metrics->errors_total_malformed_ip++;
+		return INVALID;
+	}
+
+	if (ipv4->version != 4) {
+		metrics->errors_total_malformed_ip++;
+		return INVALID;
+	}
+
+	if (ipv4_is_fragment(ipv4)) {
+		metrics->errors_total_fragmented_ip++;
+		return INVALID;
+	}
+
+	switch (ipv4->protocol) {
+	case IPPROTO_ICMP:
+		return process_icmpv4(pkt, metrics);
+
+	case IPPROTO_TCP:
+		return process_tcp(pkt, ipv4, sizeof(*ipv4), metrics);
+
+	case IPPROTO_UDP:
+		return process_udp(pkt, ipv4, sizeof(*ipv4), metrics);
+
+	default:
+		metrics->errors_total_unknown_l4_proto++;
+		return INVALID;
+	}
+}
+
+static verdict_t process_ipv6(buf_t *pkt, metrics_t *metrics)
+{
+	metrics->l3_protocol_packets_total_ipv6++;
+
+	uint8_t l4_proto;
+	bool is_fragment;
+	struct ipv6hdr _ipv6;
+	struct ipv6hdr *ipv6 =
+		pkt_parse_ipv6(pkt, &_ipv6, &l4_proto, &is_fragment);
+	if (ipv6 == NULL) {
+		metrics->errors_total_malformed_ip++;
+		return INVALID;
+	}
+
+	if (ipv6->version != 6) {
+		metrics->errors_total_malformed_ip++;
+		return INVALID;
+	}
+
+	if (is_fragment) {
+		metrics->errors_total_fragmented_ip++;
+		return INVALID;
+	}
+
+	switch (l4_proto) {
+	case IPPROTO_ICMPV6:
+		return process_icmpv6(pkt, metrics);
+
+	case IPPROTO_TCP:
+		return process_tcp(pkt, ipv6, sizeof(*ipv6), metrics);
+
+	case IPPROTO_UDP:
+		return process_udp(pkt, ipv6, sizeof(*ipv6), metrics);
+
+	default:
+		metrics->errors_total_unknown_l4_proto++;
+		return INVALID;
+	}
+}
+
+SEC("classifier/cls_redirect")
+int cls_redirect(struct __sk_buff *skb)
+{
+	metrics_t *metrics = get_global_metrics();
+	if (metrics == NULL) {
+		return TC_ACT_SHOT;
+	}
+
+	metrics->processed_packets_total++;
+
+	/* Pass bogus packets as long as we're not sure they're
+	 * destined for us.
+	 */
+	if (skb->protocol != bpf_htons(ETH_P_IP)) {
+		return TC_ACT_OK;
+	}
+
+	encap_headers_t *encap;
+
+	/* Make sure that all encapsulation headers are available in
+	 * the linear portion of the skb. This makes it easy to manipulate them.
+	 */
+	if (bpf_skb_pull_data(skb, sizeof(*encap))) {
+		return TC_ACT_OK;
+	}
+
+	buf_t pkt = {
+		.skb = skb,
+		.head = (uint8_t *)(long)skb->data,
+		.tail = (uint8_t *)(long)skb->data_end,
+	};
+
+	encap = buf_assign(&pkt, sizeof(*encap), NULL);
+	if (encap == NULL) {
+		return TC_ACT_OK;
+	}
+
+	if (encap->ip.ihl != 5) {
+		/* We never have any options. */
+		return TC_ACT_OK;
+	}
+
+	if (encap->ip.daddr != ENCAPSULATION_IP ||
+	    encap->ip.protocol != IPPROTO_UDP) {
+		return TC_ACT_OK;
+	}
+
+	/* TODO Check UDP length? */
+	if (encap->udp.dest != ENCAPSULATION_PORT) {
+		return TC_ACT_OK;
+	}
+
+	/* We now know that the packet is destined to us, we can
+	 * drop bogus ones.
+	 */
+	if (ipv4_is_fragment((void *)&encap->ip)) {
+		metrics->errors_total_fragmented_ip++;
+		return TC_ACT_SHOT;
+	}
+
+	if (encap->gue.variant != 0) {
+		metrics->errors_total_malformed_encapsulation++;
+		return TC_ACT_SHOT;
+	}
+
+	if (encap->gue.control != 0) {
+		metrics->errors_total_malformed_encapsulation++;
+		return TC_ACT_SHOT;
+	}
+
+	if (encap->gue.flags != 0) {
+		metrics->errors_total_malformed_encapsulation++;
+		return TC_ACT_SHOT;
+	}
+
+	if (encap->gue.hlen !=
+	    sizeof(encap->unigue) / 4 + encap->unigue.hop_count) {
+		metrics->errors_total_malformed_encapsulation++;
+		return TC_ACT_SHOT;
+	}
+
+	if (encap->unigue.version != 0) {
+		metrics->errors_total_malformed_encapsulation++;
+		return TC_ACT_SHOT;
+	}
+
+	if (encap->unigue.reserved != 0) {
+		return TC_ACT_SHOT;
+	}
+
+	struct in_addr next_hop;
+	MAYBE_RETURN(get_next_hop(&pkt, encap, &next_hop));
+
+	if (next_hop.s_addr == 0) {
+		metrics->accepted_packets_total_last_hop++;
+		return accept_locally(skb, encap);
+	}
+
+	verdict_t verdict;
+	switch (encap->gue.proto_ctype) {
+	case IPPROTO_IPIP:
+		verdict = process_ipv4(&pkt, metrics);
+		break;
+
+	case IPPROTO_IPV6:
+		verdict = process_ipv6(&pkt, metrics);
+		break;
+
+	default:
+		metrics->errors_total_unknown_l3_proto++;
+		return TC_ACT_SHOT;
+	}
+
+	switch (verdict) {
+	case INVALID:
+		/* metrics have already been bumped */
+		return TC_ACT_SHOT;
+
+	case UNKNOWN:
+		return forward_to_next_hop(skb, encap, &next_hop, metrics);
+
+	case ECHO_REQUEST:
+		metrics->accepted_packets_total_icmp_echo_request++;
+		break;
+
+	case SYN:
+		if (encap->unigue.forward_syn) {
+			return forward_to_next_hop(skb, encap, &next_hop,
+						   metrics);
+		}
+
+		metrics->accepted_packets_total_syn++;
+		break;
+
+	case SYN_COOKIE:
+		metrics->accepted_packets_total_syn_cookies++;
+		break;
+
+	case ESTABLISHED:
+		metrics->accepted_packets_total_established++;
+		break;
+	}
+
+	return accept_locally(skb, encap);
+}
diff --git a/tools/testing/selftests/bpf/progs/test_cls_redirect.h b/tools/testing/selftests/bpf/progs/test_cls_redirect.h
new file mode 100644
index 000000000000..76eab0aacba0
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_cls_redirect.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/* Copyright 2019, 2020 Cloudflare */
+
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <linux/if_ether.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/udp.h>
+
+struct gre_base_hdr {
+	uint16_t flags;
+	uint16_t protocol;
+} __attribute__((packed));
+
+struct guehdr {
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+	uint8_t hlen : 5, control : 1, variant : 2;
+#else
+	uint8_t variant : 2, control : 1, hlen : 5;
+#endif
+	uint8_t proto_ctype;
+	uint16_t flags;
+};
+
+struct unigue {
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+	uint8_t _r : 2, last_hop_gre : 1, forward_syn : 1, version : 4;
+#else
+	uint8_t version : 4, forward_syn : 1, last_hop_gre : 1, _r : 2;
+#endif
+	uint8_t reserved;
+	uint8_t next_hop;
+	uint8_t hop_count;
+	// Next hops go here
+} __attribute__((packed));
+
+typedef struct {
+	struct ethhdr eth;
+	struct iphdr ip;
+	struct gre_base_hdr gre;
+} __attribute__((packed)) encap_gre_t;
+
+typedef struct {
+	struct ethhdr eth;
+	struct iphdr ip;
+	struct udphdr udp;
+	struct guehdr gue;
+	struct unigue unigue;
+} __attribute__((packed)) encap_headers_t;
diff --git a/tools/testing/selftests/bpf/progs/test_obj_id.c b/tools/testing/selftests/bpf/progs/test_obj_id.c
index 98b9de2fafd0..ded71b3ff6b4 100644
--- a/tools/testing/selftests/bpf/progs/test_obj_id.c
+++ b/tools/testing/selftests/bpf/progs/test_obj_id.c
@@ -3,16 +3,8 @@
  */
 #include <stddef.h>
 #include <linux/bpf.h>
-#include <linux/pkt_cls.h>
 #include <bpf/bpf_helpers.h>
 
-/* It is a dumb bpf program such that it must have no
- * issue to be loaded since testing the verifier is
- * not the focus here.
- */
-
-int _version SEC("version") = 1;
-
 struct {
 	__uint(type, BPF_MAP_TYPE_ARRAY);
 	__uint(max_entries, 1);
@@ -20,13 +12,13 @@ struct {
 	__type(value, __u64);
 } test_map_id SEC(".maps");
 
-SEC("test_obj_id_dummy")
-int test_obj_id(struct __sk_buff *skb)
+SEC("raw_tp/sys_enter")
+int test_obj_id(void *ctx)
 {
 	__u32 key = 0;
 	__u64 *value;
 
 	value = bpf_map_lookup_elem(&test_map_id, &key);
 
-	return TC_ACT_OK;
+	return 0;
 }
diff --git a/tools/testing/selftests/bpf/progs/test_sk_assign.c b/tools/testing/selftests/bpf/progs/test_sk_assign.c
index 8f530843b4da..1ecd987005d2 100644
--- a/tools/testing/selftests/bpf/progs/test_sk_assign.c
+++ b/tools/testing/selftests/bpf/progs/test_sk_assign.c
@@ -16,6 +16,26 @@
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_endian.h>
 
+/* Pin map under /sys/fs/bpf/tc/globals/<map name> */
+#define PIN_GLOBAL_NS 2
+
+/* Must match struct bpf_elf_map layout from iproute2 */
+struct {
+	__u32 type;
+	__u32 size_key;
+	__u32 size_value;
+	__u32 max_elem;
+	__u32 flags;
+	__u32 id;
+	__u32 pinning;
+} server_map SEC("maps") = {
+	.type = BPF_MAP_TYPE_SOCKMAP,
+	.size_key = sizeof(int),
+	.size_value  = sizeof(__u64),
+	.max_elem = 1,
+	.pinning = PIN_GLOBAL_NS,
+};
+
 int _version SEC("version") = 1;
 char _license[] SEC("license") = "GPL";
 
@@ -72,7 +92,9 @@ handle_udp(struct __sk_buff *skb, struct bpf_sock_tuple *tuple, bool ipv4)
 {
 	struct bpf_sock_tuple ln = {0};
 	struct bpf_sock *sk;
+	const int zero = 0;
 	size_t tuple_len;
+	__be16 dport;
 	int ret;
 
 	tuple_len = ipv4 ? sizeof(tuple->ipv4) : sizeof(tuple->ipv6);
@@ -83,32 +105,11 @@ handle_udp(struct __sk_buff *skb, struct bpf_sock_tuple *tuple, bool ipv4)
 	if (sk)
 		goto assign;
 
-	if (ipv4) {
-		if (tuple->ipv4.dport != bpf_htons(4321))
-			return TC_ACT_OK;
-
-		ln.ipv4.daddr = bpf_htonl(0x7f000001);
-		ln.ipv4.dport = bpf_htons(1234);
-
-		sk = bpf_sk_lookup_udp(skb, &ln, sizeof(ln.ipv4),
-					BPF_F_CURRENT_NETNS, 0);
-	} else {
-		if (tuple->ipv6.dport != bpf_htons(4321))
-			return TC_ACT_OK;
-
-		/* Upper parts of daddr are already zero. */
-		ln.ipv6.daddr[3] = bpf_htonl(0x1);
-		ln.ipv6.dport = bpf_htons(1234);
-
-		sk = bpf_sk_lookup_udp(skb, &ln, sizeof(ln.ipv6),
-					BPF_F_CURRENT_NETNS, 0);
-	}
+	dport = ipv4 ? tuple->ipv4.dport : tuple->ipv6.dport;
+	if (dport != bpf_htons(4321))
+		return TC_ACT_OK;
 
-	/* workaround: We can't do a single socket lookup here, because then
-	 * the compiler will likely spill tuple_len to the stack. This makes it
-	 * lose all bounds information in the verifier, which then rejects the
-	 * call as unsafe.
-	 */
+	sk = bpf_map_lookup_elem(&server_map, &zero);
 	if (!sk)
 		return TC_ACT_SHOT;
 
@@ -123,7 +124,9 @@ handle_tcp(struct __sk_buff *skb, struct bpf_sock_tuple *tuple, bool ipv4)
 {
 	struct bpf_sock_tuple ln = {0};
 	struct bpf_sock *sk;
+	const int zero = 0;
 	size_t tuple_len;
+	__be16 dport;
 	int ret;
 
 	tuple_len = ipv4 ? sizeof(tuple->ipv4) : sizeof(tuple->ipv6);
@@ -137,32 +140,11 @@ handle_tcp(struct __sk_buff *skb, struct bpf_sock_tuple *tuple, bool ipv4)
 		bpf_sk_release(sk);
 	}
 
-	if (ipv4) {
-		if (tuple->ipv4.dport != bpf_htons(4321))
-			return TC_ACT_OK;
+	dport = ipv4 ? tuple->ipv4.dport : tuple->ipv6.dport;
+	if (dport != bpf_htons(4321))
+		return TC_ACT_OK;
 
-		ln.ipv4.daddr = bpf_htonl(0x7f000001);
-		ln.ipv4.dport = bpf_htons(1234);
-
-		sk = bpf_skc_lookup_tcp(skb, &ln, sizeof(ln.ipv4),
-					BPF_F_CURRENT_NETNS, 0);
-	} else {
-		if (tuple->ipv6.dport != bpf_htons(4321))
-			return TC_ACT_OK;
-
-		/* Upper parts of daddr are already zero. */
-		ln.ipv6.daddr[3] = bpf_htonl(0x1);
-		ln.ipv6.dport = bpf_htons(1234);
-
-		sk = bpf_skc_lookup_tcp(skb, &ln, sizeof(ln.ipv6),
-					BPF_F_CURRENT_NETNS, 0);
-	}
-
-	/* workaround: We can't do a single socket lookup here, because then
-	 * the compiler will likely spill tuple_len to the stack. This makes it
-	 * lose all bounds information in the verifier, which then rejects the
-	 * call as unsafe.
-	 */
+	sk = bpf_map_lookup_elem(&server_map, &zero);
 	if (!sk)
 		return TC_ACT_SHOT;
 
diff --git a/tools/testing/selftests/bpf/progs/test_sysctl_prog.c b/tools/testing/selftests/bpf/progs/test_sysctl_prog.c
index 2d0b0b82a78a..50525235380e 100644
--- a/tools/testing/selftests/bpf/progs/test_sysctl_prog.c
+++ b/tools/testing/selftests/bpf/progs/test_sysctl_prog.c
@@ -45,7 +45,7 @@ int sysctl_tcp_mem(struct bpf_sysctl *ctx)
 	unsigned long tcp_mem[3] = {0, 0, 0};
 	char value[MAX_VALUE_STR_LEN];
 	unsigned char i, off = 0;
-	int ret;
+	volatile int ret;
 
 	if (ctx->write)
 		return 0;
diff --git a/tools/testing/selftests/bpf/test_hashmap.c b/tools/testing/selftests/bpf/test_hashmap.c
deleted file mode 100644
index c490e012c23f..000000000000
--- a/tools/testing/selftests/bpf/test_hashmap.c
+++ /dev/null
@@ -1,382 +0,0 @@
-// SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
-
-/*
- * Tests for libbpf's hashmap.
- *
- * Copyright (c) 2019 Facebook
- */
-#include <stdio.h>
-#include <errno.h>
-#include <linux/err.h>
-#include "bpf/hashmap.h"
-
-#define CHECK(condition, format...) ({					\
-	int __ret = !!(condition);					\
-	if (__ret) {							\
-		fprintf(stderr, "%s:%d:FAIL ", __func__, __LINE__);	\
-		fprintf(stderr, format);				\
-	}								\
-	__ret;								\
-})
-
-size_t hash_fn(const void *k, void *ctx)
-{
-	return (long)k;
-}
-
-bool equal_fn(const void *a, const void *b, void *ctx)
-{
-	return (long)a == (long)b;
-}
-
-static inline size_t next_pow_2(size_t n)
-{
-	size_t r = 1;
-
-	while (r < n)
-		r <<= 1;
-	return r;
-}
-
-static inline size_t exp_cap(size_t sz)
-{
-	size_t r = next_pow_2(sz);
-
-	if (sz * 4 / 3 > r)
-		r <<= 1;
-	return r;
-}
-
-#define ELEM_CNT 62
-
-int test_hashmap_generic(void)
-{
-	struct hashmap_entry *entry, *tmp;
-	int err, bkt, found_cnt, i;
-	long long found_msk;
-	struct hashmap *map;
-
-	fprintf(stderr, "%s: ", __func__);
-
-	map = hashmap__new(hash_fn, equal_fn, NULL);
-	if (CHECK(IS_ERR(map), "failed to create map: %ld\n", PTR_ERR(map)))
-		return 1;
-
-	for (i = 0; i < ELEM_CNT; i++) {
-		const void *oldk, *k = (const void *)(long)i;
-		void *oldv, *v = (void *)(long)(1024 + i);
-
-		err = hashmap__update(map, k, v, &oldk, &oldv);
-		if (CHECK(err != -ENOENT, "unexpected result: %d\n", err))
-			return 1;
-
-		if (i % 2) {
-			err = hashmap__add(map, k, v);
-		} else {
-			err = hashmap__set(map, k, v, &oldk, &oldv);
-			if (CHECK(oldk != NULL || oldv != NULL,
-				  "unexpected k/v: %p=%p\n", oldk, oldv))
-				return 1;
-		}
-
-		if (CHECK(err, "failed to add k/v %ld = %ld: %d\n",
-			       (long)k, (long)v, err))
-			return 1;
-
-		if (CHECK(!hashmap__find(map, k, &oldv),
-			  "failed to find key %ld\n", (long)k))
-			return 1;
-		if (CHECK(oldv != v, "found value is wrong: %ld\n", (long)oldv))
-			return 1;
-	}
-
-	if (CHECK(hashmap__size(map) != ELEM_CNT,
-		  "invalid map size: %zu\n", hashmap__size(map)))
-		return 1;
-	if (CHECK(hashmap__capacity(map) != exp_cap(hashmap__size(map)),
-		  "unexpected map capacity: %zu\n", hashmap__capacity(map)))
-		return 1;
-
-	found_msk = 0;
-	hashmap__for_each_entry(map, entry, bkt) {
-		long k = (long)entry->key;
-		long v = (long)entry->value;
-
-		found_msk |= 1ULL << k;
-		if (CHECK(v - k != 1024, "invalid k/v pair: %ld = %ld\n", k, v))
-			return 1;
-	}
-	if (CHECK(found_msk != (1ULL << ELEM_CNT) - 1,
-		  "not all keys iterated: %llx\n", found_msk))
-		return 1;
-
-	for (i = 0; i < ELEM_CNT; i++) {
-		const void *oldk, *k = (const void *)(long)i;
-		void *oldv, *v = (void *)(long)(256 + i);
-
-		err = hashmap__add(map, k, v);
-		if (CHECK(err != -EEXIST, "unexpected add result: %d\n", err))
-			return 1;
-
-		if (i % 2)
-			err = hashmap__update(map, k, v, &oldk, &oldv);
-		else
-			err = hashmap__set(map, k, v, &oldk, &oldv);
-
-		if (CHECK(err, "failed to update k/v %ld = %ld: %d\n",
-			       (long)k, (long)v, err))
-			return 1;
-		if (CHECK(!hashmap__find(map, k, &oldv),
-			  "failed to find key %ld\n", (long)k))
-			return 1;
-		if (CHECK(oldv != v, "found value is wrong: %ld\n", (long)oldv))
-			return 1;
-	}
-
-	if (CHECK(hashmap__size(map) != ELEM_CNT,
-		  "invalid updated map size: %zu\n", hashmap__size(map)))
-		return 1;
-	if (CHECK(hashmap__capacity(map) != exp_cap(hashmap__size(map)),
-		  "unexpected map capacity: %zu\n", hashmap__capacity(map)))
-		return 1;
-
-	found_msk = 0;
-	hashmap__for_each_entry_safe(map, entry, tmp, bkt) {
-		long k = (long)entry->key;
-		long v = (long)entry->value;
-
-		found_msk |= 1ULL << k;
-		if (CHECK(v - k != 256,
-			  "invalid updated k/v pair: %ld = %ld\n", k, v))
-			return 1;
-	}
-	if (CHECK(found_msk != (1ULL << ELEM_CNT) - 1,
-		  "not all keys iterated after update: %llx\n", found_msk))
-		return 1;
-
-	found_cnt = 0;
-	hashmap__for_each_key_entry(map, entry, (void *)0) {
-		found_cnt++;
-	}
-	if (CHECK(!found_cnt, "didn't find any entries for key 0\n"))
-		return 1;
-
-	found_msk = 0;
-	found_cnt = 0;
-	hashmap__for_each_key_entry_safe(map, entry, tmp, (void *)0) {
-		const void *oldk, *k;
-		void *oldv, *v;
-
-		k = entry->key;
-		v = entry->value;
-
-		found_cnt++;
-		found_msk |= 1ULL << (long)k;
-
-		if (CHECK(!hashmap__delete(map, k, &oldk, &oldv),
-			  "failed to delete k/v %ld = %ld\n",
-			  (long)k, (long)v))
-			return 1;
-		if (CHECK(oldk != k || oldv != v,
-			  "invalid deleted k/v: expected %ld = %ld, got %ld = %ld\n",
-			  (long)k, (long)v, (long)oldk, (long)oldv))
-			return 1;
-		if (CHECK(hashmap__delete(map, k, &oldk, &oldv),
-			  "unexpectedly deleted k/v %ld = %ld\n",
-			  (long)oldk, (long)oldv))
-			return 1;
-	}
-
-	if (CHECK(!found_cnt || !found_msk,
-		  "didn't delete any key entries\n"))
-		return 1;
-	if (CHECK(hashmap__size(map) != ELEM_CNT - found_cnt,
-		  "invalid updated map size (already deleted: %d): %zu\n",
-		  found_cnt, hashmap__size(map)))
-		return 1;
-	if (CHECK(hashmap__capacity(map) != exp_cap(hashmap__size(map)),
-		  "unexpected map capacity: %zu\n", hashmap__capacity(map)))
-		return 1;
-
-	hashmap__for_each_entry_safe(map, entry, tmp, bkt) {
-		const void *oldk, *k;
-		void *oldv, *v;
-
-		k = entry->key;
-		v = entry->value;
-
-		found_cnt++;
-		found_msk |= 1ULL << (long)k;
-
-		if (CHECK(!hashmap__delete(map, k, &oldk, &oldv),
-			  "failed to delete k/v %ld = %ld\n",
-			  (long)k, (long)v))
-			return 1;
-		if (CHECK(oldk != k || oldv != v,
-			  "invalid old k/v: expect %ld = %ld, got %ld = %ld\n",
-			  (long)k, (long)v, (long)oldk, (long)oldv))
-			return 1;
-		if (CHECK(hashmap__delete(map, k, &oldk, &oldv),
-			  "unexpectedly deleted k/v %ld = %ld\n",
-			  (long)k, (long)v))
-			return 1;
-	}
-
-	if (CHECK(found_cnt != ELEM_CNT || found_msk != (1ULL << ELEM_CNT) - 1,
-		  "not all keys were deleted: found_cnt:%d, found_msk:%llx\n",
-		  found_cnt, found_msk))
-		return 1;
-	if (CHECK(hashmap__size(map) != 0,
-		  "invalid updated map size (already deleted: %d): %zu\n",
-		  found_cnt, hashmap__size(map)))
-		return 1;
-
-	found_cnt = 0;
-	hashmap__for_each_entry(map, entry, bkt) {
-		CHECK(false, "unexpected map entries left: %ld = %ld\n",
-			     (long)entry->key, (long)entry->value);
-		return 1;
-	}
-
-	hashmap__free(map);
-	hashmap__for_each_entry(map, entry, bkt) {
-		CHECK(false, "unexpected map entries left: %ld = %ld\n",
-			     (long)entry->key, (long)entry->value);
-		return 1;
-	}
-
-	fprintf(stderr, "OK\n");
-	return 0;
-}
-
-size_t collision_hash_fn(const void *k, void *ctx)
-{
-	return 0;
-}
-
-int test_hashmap_multimap(void)
-{
-	void *k1 = (void *)0, *k2 = (void *)1;
-	struct hashmap_entry *entry;
-	struct hashmap *map;
-	long found_msk;
-	int err, bkt;
-
-	fprintf(stderr, "%s: ", __func__);
-
-	/* force collisions */
-	map = hashmap__new(collision_hash_fn, equal_fn, NULL);
-	if (CHECK(IS_ERR(map), "failed to create map: %ld\n", PTR_ERR(map)))
-		return 1;
-
-
-	/* set up multimap:
-	 * [0] -> 1, 2, 4;
-	 * [1] -> 8, 16, 32;
-	 */
-	err = hashmap__append(map, k1, (void *)1);
-	if (CHECK(err, "failed to add k/v: %d\n", err))
-		return 1;
-	err = hashmap__append(map, k1, (void *)2);
-	if (CHECK(err, "failed to add k/v: %d\n", err))
-		return 1;
-	err = hashmap__append(map, k1, (void *)4);
-	if (CHECK(err, "failed to add k/v: %d\n", err))
-		return 1;
-
-	err = hashmap__append(map, k2, (void *)8);
-	if (CHECK(err, "failed to add k/v: %d\n", err))
-		return 1;
-	err = hashmap__append(map, k2, (void *)16);
-	if (CHECK(err, "failed to add k/v: %d\n", err))
-		return 1;
-	err = hashmap__append(map, k2, (void *)32);
-	if (CHECK(err, "failed to add k/v: %d\n", err))
-		return 1;
-
-	if (CHECK(hashmap__size(map) != 6,
-		  "invalid map size: %zu\n", hashmap__size(map)))
-		return 1;
-
-	/* verify global iteration still works and sees all values */
-	found_msk = 0;
-	hashmap__for_each_entry(map, entry, bkt) {
-		found_msk |= (long)entry->value;
-	}
-	if (CHECK(found_msk != (1 << 6) - 1,
-		  "not all keys iterated: %lx\n", found_msk))
-		return 1;
-
-	/* iterate values for key 1 */
-	found_msk = 0;
-	hashmap__for_each_key_entry(map, entry, k1) {
-		found_msk |= (long)entry->value;
-	}
-	if (CHECK(found_msk != (1 | 2 | 4),
-		  "invalid k1 values: %lx\n", found_msk))
-		return 1;
-
-	/* iterate values for key 2 */
-	found_msk = 0;
-	hashmap__for_each_key_entry(map, entry, k2) {
-		found_msk |= (long)entry->value;
-	}
-	if (CHECK(found_msk != (8 | 16 | 32),
-		  "invalid k2 values: %lx\n", found_msk))
-		return 1;
-
-	fprintf(stderr, "OK\n");
-	return 0;
-}
-
-int test_hashmap_empty()
-{
-	struct hashmap_entry *entry;
-	int bkt;
-	struct hashmap *map;
-	void *k = (void *)0;
-
-	fprintf(stderr, "%s: ", __func__);
-
-	/* force collisions */
-	map = hashmap__new(hash_fn, equal_fn, NULL);
-	if (CHECK(IS_ERR(map), "failed to create map: %ld\n", PTR_ERR(map)))
-		return 1;
-
-	if (CHECK(hashmap__size(map) != 0,
-		  "invalid map size: %zu\n", hashmap__size(map)))
-		return 1;
-	if (CHECK(hashmap__capacity(map) != 0,
-		  "invalid map capacity: %zu\n", hashmap__capacity(map)))
-		return 1;
-	if (CHECK(hashmap__find(map, k, NULL), "unexpected find\n"))
-		return 1;
-	if (CHECK(hashmap__delete(map, k, NULL, NULL), "unexpected delete\n"))
-		return 1;
-
-	hashmap__for_each_entry(map, entry, bkt) {
-		CHECK(false, "unexpected iterated entry\n");
-		return 1;
-	}
-	hashmap__for_each_key_entry(map, entry, k) {
-		CHECK(false, "unexpected key entry\n");
-		return 1;
-	}
-
-	fprintf(stderr, "OK\n");
-	return 0;
-}
-
-int main(int argc, char **argv)
-{
-	bool failed = false;
-
-	if (test_hashmap_generic())
-		failed = true;
-	if (test_hashmap_multimap())
-		failed = true;
-	if (test_hashmap_empty())
-		failed = true;
-
-	return failed;
-}
diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index b521e0a512b6..93970ec1c9e9 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -351,6 +351,7 @@ int extract_build_id(char *build_id, size_t size)
 		len = size;
 	memcpy(build_id, line, len);
 	build_id[len] = '\0';
+	free(line);
 	return 0;
 err:
 	fclose(fp);
@@ -420,6 +421,18 @@ static int libbpf_print_fn(enum libbpf_print_level level,
 	return 0;
 }
 
+static void free_str_set(const struct str_set *set)
+{
+	int i;
+
+	if (!set)
+		return;
+
+	for (i = 0; i < set->cnt; i++)
+		free((void *)set->strs[i]);
+	free(set->strs);
+}
+
 static int parse_str_list(const char *s, struct str_set *set)
 {
 	char *input, *state = NULL, *next, **tmp, **strs = NULL;
@@ -756,11 +769,11 @@ int main(int argc, char **argv)
 	fprintf(stdout, "Summary: %d/%d PASSED, %d SKIPPED, %d FAILED\n",
 		env.succ_cnt, env.sub_succ_cnt, env.skip_cnt, env.fail_cnt);
 
-	free(env.test_selector.blacklist.strs);
-	free(env.test_selector.whitelist.strs);
+	free_str_set(&env.test_selector.blacklist);
+	free_str_set(&env.test_selector.whitelist);
 	free(env.test_selector.num_set);
-	free(env.subtest_selector.blacklist.strs);
-	free(env.subtest_selector.whitelist.strs);
+	free_str_set(&env.subtest_selector.blacklist);
+	free_str_set(&env.subtest_selector.whitelist);
 	free(env.subtest_selector.num_set);
 
 	return env.fail_cnt ? EXIT_FAILURE : EXIT_SUCCESS;
diff --git a/tools/testing/selftests/bpf/test_progs.h b/tools/testing/selftests/bpf/test_progs.h
index f4aff6b8284b..10188cc8e9e0 100644
--- a/tools/testing/selftests/bpf/test_progs.h
+++ b/tools/testing/selftests/bpf/test_progs.h
@@ -105,6 +105,13 @@ struct ipv6_packet {
 } __packed;
 extern struct ipv6_packet pkt_v6;
 
+#define PRINT_FAIL(format...)                                                  \
+	({                                                                     \
+		test__fail();                                                  \
+		fprintf(stdout, "%s:FAIL:%d ", __func__, __LINE__);            \
+		fprintf(stdout, ##format);                                     \
+	})
+
 #define _CHECK(condition, tag, duration, format...) ({			\
 	int __ret = !!(condition);					\
 	int __save_errno = errno;					\
diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 87eaa49609a0..ad6939c67c5e 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -943,7 +943,12 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 	attr.insns = prog;
 	attr.insns_cnt = prog_len;
 	attr.license = "GPL";
-	attr.log_level = verbose || expected_ret == VERBOSE_ACCEPT ? 1 : 4;
+	if (verbose)
+		attr.log_level = 1;
+	else if (expected_ret == VERBOSE_ACCEPT)
+		attr.log_level = 2;
+	else
+		attr.log_level = 4;
 	attr.prog_flags = pflags;
 
 	fd_prog = bpf_load_program_xattr(&attr, bpf_vlog, sizeof(bpf_vlog));
diff --git a/tools/testing/selftests/bpf/verifier/event_output.c b/tools/testing/selftests/bpf/verifier/event_output.c
index 130553e19eca..99f8f582c02b 100644
--- a/tools/testing/selftests/bpf/verifier/event_output.c
+++ b/tools/testing/selftests/bpf/verifier/event_output.c
@@ -92,3 +92,27 @@
 	.result = ACCEPT,
 	.retval = 1,
 },
+{
+	"perfevent for cgroup dev",
+	.insns =  { __PERF_EVENT_INSNS__ },
+	.prog_type = BPF_PROG_TYPE_CGROUP_DEVICE,
+	.fixup_map_event_output = { 4 },
+	.result = ACCEPT,
+	.retval = 1,
+},
+{
+	"perfevent for cgroup sysctl",
+	.insns =  { __PERF_EVENT_INSNS__ },
+	.prog_type = BPF_PROG_TYPE_CGROUP_SYSCTL,
+	.fixup_map_event_output = { 4 },
+	.result = ACCEPT,
+	.retval = 1,
+},
+{
+	"perfevent for cgroup sockopt",
+	.insns =  { __PERF_EVENT_INSNS__ },
+	.prog_type = BPF_PROG_TYPE_CGROUP_SOCKOPT,
+	.fixup_map_event_output = { 4 },
+	.result = ACCEPT,
+	.retval = 1,
+},
diff --git a/tools/testing/selftests/bpf/verifier/prevent_map_lookup.c b/tools/testing/selftests/bpf/verifier/prevent_map_lookup.c
index da7a4b37cb98..fc4e301260f6 100644
--- a/tools/testing/selftests/bpf/verifier/prevent_map_lookup.c
+++ b/tools/testing/selftests/bpf/verifier/prevent_map_lookup.c
@@ -1,33 +1,3 @@
-{
-	"prevent map lookup in sockmap",
-	.insns = {
-	BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
-	BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
-	BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
-	BPF_LD_MAP_FD(BPF_REG_1, 0),
-	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
-	BPF_EXIT_INSN(),
-	},
-	.fixup_map_sockmap = { 3 },
-	.result = REJECT,
-	.errstr = "cannot pass map_type 15 into func bpf_map_lookup_elem",
-	.prog_type = BPF_PROG_TYPE_SOCK_OPS,
-},
-{
-	"prevent map lookup in sockhash",
-	.insns = {
-	BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
-	BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
-	BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
-	BPF_LD_MAP_FD(BPF_REG_1, 0),
-	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
-	BPF_EXIT_INSN(),
-	},
-	.fixup_map_sockhash = { 3 },
-	.result = REJECT,
-	.errstr = "cannot pass map_type 18 into func bpf_map_lookup_elem",
-	.prog_type = BPF_PROG_TYPE_SOCK_OPS,
-},
 {
 	"prevent map lookup in stack trace",
 	.insns = {
diff --git a/tools/testing/selftests/bpf/verifier/sock.c b/tools/testing/selftests/bpf/verifier/sock.c
index 9ed192e14f5f..f87ad69dbc62 100644
--- a/tools/testing/selftests/bpf/verifier/sock.c
+++ b/tools/testing/selftests/bpf/verifier/sock.c
@@ -516,3 +516,73 @@
 	.prog_type = BPF_PROG_TYPE_XDP,
 	.result = ACCEPT,
 },
+{
+	"bpf_map_lookup_elem(sockmap, &key)",
+	.insns = {
+	BPF_ST_MEM(BPF_W, BPF_REG_10, -4, 0),
+	BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+	BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4),
+	BPF_LD_MAP_FD(BPF_REG_1, 0),
+	BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	},
+	.fixup_map_sockmap = { 3 },
+	.prog_type = BPF_PROG_TYPE_SK_SKB,
+	.result = REJECT,
+	.errstr = "Unreleased reference id=2 alloc_insn=5",
+},
+{
+	"bpf_map_lookup_elem(sockhash, &key)",
+	.insns = {
+	BPF_ST_MEM(BPF_W, BPF_REG_10, -4, 0),
+	BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+	BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4),
+	BPF_LD_MAP_FD(BPF_REG_1, 0),
+	BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
+	BPF_MOV64_IMM(BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	},
+	.fixup_map_sockhash = { 3 },
+	.prog_type = BPF_PROG_TYPE_SK_SKB,
+	.result = REJECT,
+	.errstr = "Unreleased reference id=2 alloc_insn=5",
+},
+{
+	"bpf_map_lookup_elem(sockmap, &key); sk->type [fullsock field]; bpf_sk_release(sk)",
+	.insns = {
+	BPF_ST_MEM(BPF_W, BPF_REG_10, -4, 0),
+	BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+	BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4),
+	BPF_LD_MAP_FD(BPF_REG_1, 0),
+	BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
+	BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
+	BPF_EXIT_INSN(),
+	BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+	BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_0, offsetof(struct bpf_sock, type)),
+	BPF_EMIT_CALL(BPF_FUNC_sk_release),
+	BPF_EXIT_INSN(),
+	},
+	.fixup_map_sockmap = { 3 },
+	.prog_type = BPF_PROG_TYPE_SK_SKB,
+	.result = ACCEPT,
+},
+{
+	"bpf_map_lookup_elem(sockhash, &key); sk->type [fullsock field]; bpf_sk_release(sk)",
+	.insns = {
+	BPF_ST_MEM(BPF_W, BPF_REG_10, -4, 0),
+	BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+	BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4),
+	BPF_LD_MAP_FD(BPF_REG_1, 0),
+	BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
+	BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
+	BPF_EXIT_INSN(),
+	BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+	BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_0, offsetof(struct bpf_sock, type)),
+	BPF_EMIT_CALL(BPF_FUNC_sk_release),
+	BPF_EXIT_INSN(),
+	},
+	.fixup_map_sockhash = { 3 },
+	.prog_type = BPF_PROG_TYPE_SK_SKB,
+	.result = ACCEPT,
+},
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
index aefab0c66d54..f59853857ad2 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
@@ -10,10 +10,7 @@ if ! grep -q function_graph available_tracers; then
     exit_unsupported
 fi
 
-if [ ! -f set_ftrace_filter ]; then
-    echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
-    exit_unsupported
-fi
+check_filter_file set_ftrace_filter
 
 do_reset() {
     if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
index c8a5209f2119..d610f47edd90 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
@@ -9,6 +9,8 @@ if ! grep -q function_graph available_tracers; then
     exit_unsupported
 fi
 
+check_filter_file set_ftrace_filter
+
 fail() { # msg
     echo $1
     exit_fail
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc
index f4e92afab14b..28936f434ee5 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc
@@ -9,6 +9,8 @@ if ! grep -q function available_tracers; then
     exit_unsupported
 fi
 
+check_filter_file set_ftrace_filter
+
 disable_tracing
 clear_trace
 
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc
index 8aa46a2ea133..71db68a7975f 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc
@@ -15,10 +15,7 @@ if [ ! -f set_ftrace_notrace_pid ]; then
     exit_unsupported
 fi
 
-if [ ! -f set_ftrace_filter ]; then
-    echo "set_ftrace_filter not found? Is function tracer not set?"
-    exit_unsupported
-fi
+check_filter_file set_ftrace_filter
 
 do_function_fork=1
 
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc
index f2ee1e889e13..d58403c4b7cd 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc
@@ -16,10 +16,7 @@ if [ ! -f set_ftrace_pid ]; then
     exit_unsupported
 fi
 
-if [ ! -f set_ftrace_filter ]; then
-    echo "set_ftrace_filter not found? Is function tracer not set?"
-    exit_unsupported
-fi
+check_filter_file set_ftrace_filter
 
 do_function_fork=1
 
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc
index 1a52f2883fe0..b2aff786c1a2 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc
@@ -3,7 +3,7 @@
 # description: ftrace - stacktrace filter command
 # flags: instance
 
-[ ! -f set_ftrace_filter ] && exit_unsupported
+check_filter_file set_ftrace_filter
 
 echo _do_fork:stacktrace >> set_ftrace_filter
 
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
index ca2ffd7957f9..e9b1fd534e96 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
@@ -11,10 +11,7 @@
 #
 
 # The triggers are set within the set_ftrace_filter file
-if [ ! -f set_ftrace_filter ]; then
-    echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
-    exit_unsupported
-fi
+check_filter_file set_ftrace_filter
 
 do_reset() {
     reset_ftrace_filter
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc
index 9330c873f9fe..1a4b4a442d33 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function trace on module
 
-[ ! -f set_ftrace_filter ] && exit_unsupported
+check_filter_file set_ftrace_filter
 
 : "mod: allows to filter a non exist function"
 echo 'non_exist_func:mod:non_exist_module' > set_ftrace_filter
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
index dfbae637c60c..a3dadb6b93b4 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
@@ -18,10 +18,7 @@ if ! grep -q function_graph available_tracers; then
     exit_unsupported;
 fi
 
-if [ ! -f set_ftrace_filter ]; then
-    echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
-    exit_unsupported
-fi
+check_filter_file set_ftrace_filter
 
 if [ ! -f function_profile_enabled ]; then
     echo "function_profile_enabled not found, function profiling enabled?"
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc
index 51f6e6146bd9..70bad441fa7d 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc
@@ -10,10 +10,7 @@
 #
 
 # The triggers are set within the set_ftrace_filter file
-if [ ! -f set_ftrace_filter ]; then
-    echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
-    exit_unsupported
-fi
+check_filter_file set_ftrace_filter
 
 fail() { # mesg
     echo $1
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
index b414f0e3c646..51e9e80bc0e6 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
@@ -8,6 +8,8 @@ if [ ! -f stack_trace ]; then
   exit_unsupported
 fi
 
+check_filter_file stack_trace_filter
+
 echo > stack_trace_filter
 echo 0 > stack_max_size
 echo 1 > /proc/sys/kernel/stack_tracer_enabled
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc
index 1947387fe976..3ed173f2944a 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc
@@ -11,10 +11,7 @@
 #
 
 # The triggers are set within the set_ftrace_filter file
-if [ ! -f set_ftrace_filter ]; then
-    echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
-    exit_unsupported
-fi
+check_filter_file set_ftrace_filter
 
 fail() { # mesg
     echo $1
diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions
index 5d4550591ff9..61a3c7e2634d 100644
--- a/tools/testing/selftests/ftrace/test.d/functions
+++ b/tools/testing/selftests/ftrace/test.d/functions
@@ -1,3 +1,9 @@
+check_filter_file() { # check filter file introduced by dynamic ftrace
+    if [ ! -f "$1" ]; then
+        echo "$1 not found? Is dynamic ftrace not set?"
+        exit_unsupported
+    fi
+}
 
 clear_trace() { # reset trace output
     echo > trace
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
index 1bcb67dcae26..81490ecaaa92 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
@@ -38,7 +38,7 @@ for width in 64 32 16 8; do
   echo 0 > events/kprobes/testprobe/enable
 
   : "Confirm the arguments is recorded in given types correctly"
-  ARGS=`grep "testprobe" trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
+  ARGS=`grep "testprobe" trace | head -n 1 | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
   check_types $ARGS $width
 
   : "Clear event for next loop"
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc
index 7650a82db3f5..df5072815b87 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc
@@ -5,6 +5,8 @@
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 grep "function" available_tracers || exit_unsupported # this is configurable
 
+check_filter_file set_ftrace_filter
+
 # prepare
 echo nop > current_tracer
 echo _do_fork > set_ftrace_filter
diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile
index 0bb80619db58..32bdc978a711 100644
--- a/tools/testing/selftests/gpio/Makefile
+++ b/tools/testing/selftests/gpio/Makefile
@@ -1,13 +1,13 @@
 # SPDX-License-Identifier: GPL-2.0
 
-MOUNT_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null)
-MOUNT_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null)
-ifeq ($(MOUNT_LDLIBS),)
-MOUNT_LDLIBS := -lmount -I/usr/include/libmount
+VAR_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null)
+VAR_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null)
+ifeq ($(VAR_LDLIBS),)
+VAR_LDLIBS := -lmount -I/usr/include/libmount
 endif
 
-CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(MOUNT_CFLAGS)
-LDLIBS += $(MOUNT_LDLIBS)
+CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS)
+LDLIBS += $(VAR_LDLIBS)
 
 TEST_PROGS := gpio-mockup.sh
 TEST_FILES := gpio-mockup-sysfs.sh
diff --git a/tools/testing/selftests/intel_pstate/Makefile b/tools/testing/selftests/intel_pstate/Makefile
index 7340fd6a9a9f..39f0fa2a8fd6 100644
--- a/tools/testing/selftests/intel_pstate/Makefile
+++ b/tools/testing/selftests/intel_pstate/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 CFLAGS := $(CFLAGS) -Wall -D_GNU_SOURCE
-LDLIBS := $(LDLIBS) -lm
+LDLIBS += -lm
 
 uname_M := $(shell uname -m 2>/dev/null || echo not)
 ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
diff --git a/tools/testing/selftests/kselftest_deps.sh b/tools/testing/selftests/kselftest_deps.sh
new file mode 100755
index 000000000000..bbc04646346b
--- /dev/null
+++ b/tools/testing/selftests/kselftest_deps.sh
@@ -0,0 +1,272 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# kselftest_deps.sh
+#
+# Checks for kselftest build dependencies on the build system.
+# Copyright (c) 2020 Shuah Khan <skhan@linuxfoundation.org>
+#
+#
+
+usage()
+{
+
+echo -e "Usage: $0 -[p] <compiler> [test_name]\n"
+echo -e "\tkselftest_deps.sh [-p] gcc"
+echo -e "\tkselftest_deps.sh [-p] gcc vm"
+echo -e "\tkselftest_deps.sh [-p] aarch64-linux-gnu-gcc"
+echo -e "\tkselftest_deps.sh [-p] aarch64-linux-gnu-gcc vm\n"
+echo "- Should be run in selftests directory in the kernel repo."
+echo "- Checks if Kselftests can be built/cross-built on a system."
+echo "- Parses all test/sub-test Makefile to find library dependencies."
+echo "- Runs compile test on a trivial C file with LDLIBS specified"
+echo "  in the test Makefiles to identify missing library dependencies."
+echo "- Prints suggested target list for a system filtering out tests"
+echo "  failed the build dependency check from the TARGETS in Selftests"
+echo "  main Makefile when optional -p is specified."
+echo "- Prints pass/fail dependency check for each tests/sub-test."
+echo "- Prints pass/fail targets and libraries."
+echo "- Default: runs dependency checks on all tests."
+echo "- Optional test name can be specified to check dependencies for it."
+exit 1
+
+}
+
+# Start main()
+main()
+{
+
+base_dir=`pwd`
+# Make sure we're in the selftests top-level directory.
+if [ $(basename "$base_dir") !=  "selftests" ]; then
+	echo -e "\tPlease run $0 in"
+	echo -e "\ttools/testing/selftests directory ..."
+	exit 1
+fi
+
+print_targets=0
+
+while getopts "p" arg; do
+    case $arg in
+        p)
+		print_targets=1
+	shift;;
+    esac
+done
+
+if [ $# -eq 0 ]
+then
+	usage
+fi
+
+# Compiler
+CC=$1
+
+tmp_file=$(mktemp).c
+trap "rm -f $tmp_file.o $tmp_file $tmp_file.bin" EXIT
+#echo $tmp_file
+
+pass=$(mktemp).out
+trap "rm -f $pass" EXIT
+#echo $pass
+
+fail=$(mktemp).out
+trap "rm -f $fail" EXIT
+#echo $fail
+
+# Generate tmp source fire for compile test
+cat << "EOF" > $tmp_file
+int main()
+{
+}
+EOF
+
+# Save results
+total_cnt=0
+fail_trgts=()
+fail_libs=()
+fail_cnt=0
+pass_trgts=()
+pass_libs=()
+pass_cnt=0
+
+# Get all TARGETS from selftests Makefile
+targets=$(egrep "^TARGETS +|^TARGETS =" Makefile | cut -d "=" -f2)
+
+# Single test case
+if [ $# -eq 2 ]
+then
+	test=$2/Makefile
+
+	l1_test $test
+	l2_test $test
+	l3_test $test
+
+	print_results $1 $2
+	exit $?
+fi
+
+# Level 1: LDLIBS set static.
+#
+# Find all LDLIBS set statically for all executables built by a Makefile
+# and filter out VAR_LDLIBS to discard the following:
+# 	gpio/Makefile:LDLIBS += $(VAR_LDLIBS)
+# Append space at the end of the list to append more tests.
+
+l1_tests=$(grep -r --include=Makefile "^LDLIBS" | \
+		grep -v "VAR_LDLIBS" | awk -F: '{print $1}')
+
+# Level 2: LDLIBS set dynamically.
+#
+# Level 2
+# Some tests have multiple valid LDLIBS lines for individual sub-tests
+# that need dependency checks. Find them and append them to the tests
+# e.g: vm/Makefile:$(OUTPUT)/userfaultfd: LDLIBS += -lpthread
+# Filter out VAR_LDLIBS to discard the following:
+# 	memfd/Makefile:$(OUTPUT)/fuse_mnt: LDLIBS += $(VAR_LDLIBS)
+# Append space at the end of the list to append more tests.
+
+l2_tests=$(grep -r --include=Makefile ": LDLIBS" | \
+		grep -v "VAR_LDLIBS" | awk -F: '{print $1}')
+
+# Level 3
+# gpio,  memfd and others use pkg-config to find mount and fuse libs
+# respectively and save it in VAR_LDLIBS. If pkg-config doesn't find
+# any, VAR_LDLIBS set to default.
+# Use the default value and filter out pkg-config for dependency check.
+# e.g:
+# gpio/Makefile
+#	VAR_LDLIBS := $(shell pkg-config --libs mount) 2>/dev/null)
+# memfd/Makefile
+#	VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null)
+
+l3_tests=$(grep -r --include=Makefile "^VAR_LDLIBS" | \
+		grep -v "pkg-config" | awk -F: '{print $1}')
+
+#echo $l1_tests
+#echo $l2_1_tests
+#echo $l3_tests
+
+all_tests
+print_results $1 $2
+
+exit $?
+}
+# end main()
+
+all_tests()
+{
+	for test in $l1_tests; do
+		l1_test $test
+	done
+
+	for test in $l2_tests; do
+		l2_test $test
+	done
+
+	for test in $l3_tests; do
+		l3_test $test
+	done
+}
+
+# Use same parsing used for l1_tests and pick libraries this time.
+l1_test()
+{
+	test_libs=$(grep --include=Makefile "^LDLIBS" $test | \
+			grep -v "VAR_LDLIBS" | \
+			sed -e 's/\:/ /' | \
+			sed -e 's/+/ /' | cut -d "=" -f 2)
+
+	check_libs $test $test_libs
+}
+
+# Use same parsing used for l2__tests and pick libraries this time.
+l2_test()
+{
+	test_libs=$(grep --include=Makefile ": LDLIBS" $test | \
+			grep -v "VAR_LDLIBS" | \
+			sed -e 's/\:/ /' | sed -e 's/+/ /' | \
+			cut -d "=" -f 2)
+
+	check_libs $test $test_libs
+}
+
+l3_test()
+{
+	test_libs=$(grep --include=Makefile "^VAR_LDLIBS" $test | \
+			grep -v "pkg-config" | sed -e 's/\:/ /' |
+			sed -e 's/+/ /' | cut -d "=" -f 2)
+
+	check_libs $test $test_libs
+}
+
+check_libs()
+{
+
+if [[ ! -z "${test_libs// }" ]]
+then
+
+	#echo $test_libs
+
+	for lib in $test_libs; do
+
+	let total_cnt+=1
+	$CC -o $tmp_file.bin $lib $tmp_file > /dev/null 2>&1
+	if [ $? -ne 0 ]; then
+		echo "FAIL: $test dependency check: $lib" >> $fail
+		let fail_cnt+=1
+		fail_libs+="$lib "
+		fail_target=$(echo "$test" | cut -d "/" -f1)
+		fail_trgts+="$fail_target "
+		targets=$(echo "$targets" | grep -v "$fail_target")
+	else
+		echo "PASS: $test dependency check passed $lib" >> $pass
+		let pass_cnt+=1
+		pass_libs+="$lib "
+		pass_trgts+="$(echo "$test" | cut -d "/" -f1) "
+	fi
+
+	done
+fi
+}
+
+print_results()
+{
+	echo -e "========================================================";
+	echo -e "Kselftest Dependency Check for [$0 $1 $2] results..."
+
+	if [ $print_targets -ne 0 ]
+	then
+	echo -e "Suggested Selftest Targets for your configuration:"
+	echo -e "$targets";
+	fi
+
+	echo -e "========================================================";
+	echo -e "Checked tests defining LDLIBS dependencies"
+	echo -e "--------------------------------------------------------";
+	echo -e "Total tests with Dependencies:"
+	echo -e "$total_cnt Pass: $pass_cnt Fail: $fail_cnt";
+
+	if [ $pass_cnt -ne 0 ]; then
+	echo -e "--------------------------------------------------------";
+	cat $pass
+	echo -e "--------------------------------------------------------";
+	echo -e "Targets passed build dependency check on system:"
+	echo -e "$(echo "$pass_trgts" | xargs -n1 | sort -u | xargs)"
+	fi
+
+	if [ $fail_cnt -ne 0 ]; then
+	echo -e "--------------------------------------------------------";
+	cat $fail
+	echo -e "--------------------------------------------------------";
+	echo -e "Targets failed build dependency check on system:"
+	echo -e "$(echo "$fail_trgts" | xargs -n1 | sort -u | xargs)"
+	echo -e "--------------------------------------------------------";
+	echo -e "Missing libraries system"
+	echo -e "$(echo "$fail_libs" | xargs -n1 | sort -u | xargs)"
+	fi
+
+	echo -e "--------------------------------------------------------";
+	echo -e "========================================================";
+}
+
+main "$@"
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index 2bb8c81fc0b4..c9f03ef93338 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -168,9 +168,17 @@
 
 #define __TEST_IMPL(test_name, _signal) \
 	static void test_name(struct __test_metadata *_metadata); \
+	static inline void wrapper_##test_name( \
+		struct __test_metadata *_metadata, \
+		struct __fixture_variant_metadata *variant) \
+	{ \
+		test_name(_metadata); \
+	} \
 	static struct __test_metadata _##test_name##_object = \
-		{ .name = "global." #test_name, \
-		  .fn = &test_name, .termsig = _signal, \
+		{ .name = #test_name, \
+		  .fn = &wrapper_##test_name, \
+		  .fixture = &_fixture_global, \
+		  .termsig = _signal, \
 		  .timeout = TEST_TIMEOUT_DEFAULT, }; \
 	static void __attribute__((constructor)) _register_##test_name(void) \
 	{ \
@@ -212,10 +220,13 @@
  * populated and cleaned up using FIXTURE_SETUP() and FIXTURE_TEARDOWN().
  */
 #define FIXTURE(fixture_name) \
+	FIXTURE_VARIANT(fixture_name); \
+	static struct __fixture_metadata _##fixture_name##_fixture_object = \
+		{ .name =  #fixture_name, }; \
 	static void __attribute__((constructor)) \
 	_register_##fixture_name##_data(void) \
 	{ \
-		__fixture_count++; \
+		__register_fixture(&_##fixture_name##_fixture_object); \
 	} \
 	FIXTURE_DATA(fixture_name)
 
@@ -241,7 +252,10 @@
 #define FIXTURE_SETUP(fixture_name) \
 	void fixture_name##_setup( \
 		struct __test_metadata __attribute__((unused)) *_metadata, \
-		FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
+		FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
+		const FIXTURE_VARIANT(fixture_name) \
+			__attribute__((unused)) *variant)
+
 /**
  * FIXTURE_TEARDOWN(fixture_name)
  * *_metadata* is included so that EXPECT_* and ASSERT_* work correctly.
@@ -263,6 +277,59 @@
 		struct __test_metadata __attribute__((unused)) *_metadata, \
 		FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
 
+/**
+ * FIXTURE_VARIANT(fixture_name) - Optionally called once per fixture
+ * to declare fixture variant
+ *
+ * @fixture_name: fixture name
+ *
+ * .. code-block:: c
+ *
+ *     FIXTURE_VARIANT(datatype name) {
+ *       type property1;
+ *       ...
+ *     };
+ *
+ * Defines type of constant parameters provided to FIXTURE_SETUP() and TEST_F()
+ * as *variant*. Variants allow the same tests to be run with different
+ * arguments.
+ */
+#define FIXTURE_VARIANT(fixture_name) struct _fixture_variant_##fixture_name
+
+/**
+ * FIXTURE_VARIANT_ADD(fixture_name, variant_name) - Called once per fixture
+ * variant to setup and register the data
+ *
+ * @fixture_name: fixture name
+ * @variant_name: name of the parameter set
+ *
+ * .. code-block:: c
+ *
+ *     FIXTURE_ADD(datatype name) {
+ *       .property1 = val1;
+ *       ...
+ *     };
+ *
+ * Defines a variant of the test fixture, provided to FIXTURE_SETUP() and
+ * TEST_F() as *variant*. Tests of each fixture will be run once for each
+ * variant.
+ */
+#define FIXTURE_VARIANT_ADD(fixture_name, variant_name) \
+	extern FIXTURE_VARIANT(fixture_name) \
+		_##fixture_name##_##variant_name##_variant; \
+	static struct __fixture_variant_metadata \
+		_##fixture_name##_##variant_name##_object = \
+		{ .name = #variant_name, \
+		  .data = &_##fixture_name##_##variant_name##_variant}; \
+	static void __attribute__((constructor)) \
+		_register_##fixture_name##_##variant_name(void) \
+	{ \
+		__register_fixture_variant(&_##fixture_name##_fixture_object, \
+			&_##fixture_name##_##variant_name##_object);	\
+	} \
+	FIXTURE_VARIANT(fixture_name) \
+		_##fixture_name##_##variant_name##_variant =
+
 /**
  * TEST_F(fixture_name, test_name) - Emits test registration and helpers for
  * fixture-based test cases
@@ -293,24 +360,27 @@
 #define __TEST_F_IMPL(fixture_name, test_name, signal, tmout) \
 	static void fixture_name##_##test_name( \
 		struct __test_metadata *_metadata, \
-		FIXTURE_DATA(fixture_name) *self); \
+		FIXTURE_DATA(fixture_name) *self, \
+		const FIXTURE_VARIANT(fixture_name) *variant); \
 	static inline void wrapper_##fixture_name##_##test_name( \
-		struct __test_metadata *_metadata) \
+		struct __test_metadata *_metadata, \
+		struct __fixture_variant_metadata *variant) \
 	{ \
 		/* fixture data is alloced, setup, and torn down per call. */ \
 		FIXTURE_DATA(fixture_name) self; \
 		memset(&self, 0, sizeof(FIXTURE_DATA(fixture_name))); \
-		fixture_name##_setup(_metadata, &self); \
+		fixture_name##_setup(_metadata, &self, variant->data); \
 		/* Let setup failure terminate early. */ \
 		if (!_metadata->passed) \
 			return; \
-		fixture_name##_##test_name(_metadata, &self); \
+		fixture_name##_##test_name(_metadata, &self, variant->data); \
 		fixture_name##_teardown(_metadata, &self); \
 	} \
 	static struct __test_metadata \
 		      _##fixture_name##_##test_name##_object = { \
-		.name = #fixture_name "." #test_name, \
+		.name = #test_name, \
 		.fn = &wrapper_##fixture_name##_##test_name, \
+		.fixture = &_##fixture_name##_fixture_object, \
 		.termsig = signal, \
 		.timeout = tmout, \
 	 }; \
@@ -321,7 +391,9 @@
 	} \
 	static void fixture_name##_##test_name( \
 		struct __test_metadata __attribute__((unused)) *_metadata, \
-		FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
+		FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
+		const FIXTURE_VARIANT(fixture_name) \
+			__attribute__((unused)) *variant)
 
 /**
  * TEST_HARNESS_MAIN - Simple wrapper to run the test harness
@@ -631,11 +703,74 @@
 	} \
 } while (0); OPTIONAL_HANDLER(_assert)
 
+/* List helpers */
+#define __LIST_APPEND(head, item) \
+{ \
+	/* Circular linked list where only prev is circular. */ \
+	if (head == NULL) { \
+		head = item; \
+		item->next = NULL; \
+		item->prev = item; \
+		return;	\
+	} \
+	if (__constructor_order == _CONSTRUCTOR_ORDER_FORWARD) { \
+		item->next = NULL; \
+		item->prev = head->prev; \
+		item->prev->next = item; \
+		head->prev = item; \
+	} else { \
+		item->next = head; \
+		item->next->prev = item; \
+		item->prev = item; \
+		head = item; \
+	} \
+}
+
+struct __test_metadata;
+struct __fixture_variant_metadata;
+
+/* Contains all the information about a fixture. */
+struct __fixture_metadata {
+	const char *name;
+	struct __test_metadata *tests;
+	struct __fixture_variant_metadata *variant;
+	struct __fixture_metadata *prev, *next;
+} _fixture_global __attribute__((unused)) = {
+	.name = "global",
+	.prev = &_fixture_global,
+};
+
+static struct __fixture_metadata *__fixture_list = &_fixture_global;
+static int __constructor_order;
+
+#define _CONSTRUCTOR_ORDER_FORWARD   1
+#define _CONSTRUCTOR_ORDER_BACKWARD -1
+
+static inline void __register_fixture(struct __fixture_metadata *f)
+{
+	__LIST_APPEND(__fixture_list, f);
+}
+
+struct __fixture_variant_metadata {
+	const char *name;
+	const void *data;
+	struct __fixture_variant_metadata *prev, *next;
+};
+
+static inline void
+__register_fixture_variant(struct __fixture_metadata *f,
+			   struct __fixture_variant_metadata *variant)
+{
+	__LIST_APPEND(f->variant, variant);
+}
+
 /* Contains all the information for test execution and status checking. */
 struct __test_metadata {
 	const char *name;
-	void (*fn)(struct __test_metadata *);
+	void (*fn)(struct __test_metadata *,
+		   struct __fixture_variant_metadata *);
 	pid_t pid;	/* pid of test when being run */
+	struct __fixture_metadata *fixture;
 	int termsig;
 	int passed;
 	int trigger; /* extra handler after the evaluation */
@@ -646,15 +781,6 @@ struct __test_metadata {
 	struct __test_metadata *prev, *next;
 };
 
-/* Storage for the (global) tests to be run. */
-static struct __test_metadata *__test_list;
-static unsigned int __test_count;
-static unsigned int __fixture_count;
-static int __constructor_order;
-
-#define _CONSTRUCTOR_ORDER_FORWARD   1
-#define _CONSTRUCTOR_ORDER_BACKWARD -1
-
 /*
  * Since constructors are called in reverse order, reverse the test
  * list so tests are run in source declaration order.
@@ -666,25 +792,7 @@ static int __constructor_order;
  */
 static inline void __register_test(struct __test_metadata *t)
 {
-	__test_count++;
-	/* Circular linked list where only prev is circular. */
-	if (__test_list == NULL) {
-		__test_list = t;
-		t->next = NULL;
-		t->prev = t;
-		return;
-	}
-	if (__constructor_order == _CONSTRUCTOR_ORDER_FORWARD) {
-		t->next = NULL;
-		t->prev = __test_list->prev;
-		t->prev->next = t;
-		__test_list->prev = t;
-	} else {
-		t->next = __test_list;
-		t->next->prev = t;
-		t->prev = t;
-		__test_list = t;
-	}
+	__LIST_APPEND(t->fixture->tests, t);
 }
 
 static inline int __bail(int for_realz, bool no_print, __u8 step)
@@ -790,43 +898,67 @@ void __wait_for_test(struct __test_metadata *t)
 	}
 }
 
-void __run_test(struct __test_metadata *t)
+void __run_test(struct __fixture_metadata *f,
+		struct __fixture_variant_metadata *variant,
+		struct __test_metadata *t)
 {
+	/* reset test struct */
 	t->passed = 1;
 	t->trigger = 0;
-	printf("[ RUN      ] %s\n", t->name);
+	t->step = 0;
+	t->no_print = 0;
+
+	printf("[ RUN      ] %s%s%s.%s\n",
+	       f->name, variant->name[0] ? "." : "", variant->name, t->name);
 	t->pid = fork();
 	if (t->pid < 0) {
 		printf("ERROR SPAWNING TEST CHILD\n");
 		t->passed = 0;
 	} else if (t->pid == 0) {
-		t->fn(t);
+		t->fn(t, variant);
 		/* return the step that failed or 0 */
 		_exit(t->passed ? 0 : t->step);
 	} else {
 		__wait_for_test(t);
 	}
-	printf("[     %4s ] %s\n", (t->passed ? "OK" : "FAIL"), t->name);
+	printf("[     %4s ] %s%s%s.%s\n", (t->passed ? "OK" : "FAIL"),
+	       f->name, variant->name[0] ? "." : "", variant->name, t->name);
 }
 
 static int test_harness_run(int __attribute__((unused)) argc,
 			    char __attribute__((unused)) **argv)
 {
+	struct __fixture_variant_metadata no_variant = { .name = "", };
+	struct __fixture_variant_metadata *v;
+	struct __fixture_metadata *f;
 	struct __test_metadata *t;
 	int ret = 0;
+	unsigned int case_count = 0, test_count = 0;
 	unsigned int count = 0;
 	unsigned int pass_count = 0;
 
+	for (f = __fixture_list; f; f = f->next) {
+		for (v = f->variant ?: &no_variant; v; v = v->next) {
+			case_count++;
+			for (t = f->tests; t; t = t->next)
+				test_count++;
+		}
+	}
+
 	/* TODO(wad) add optional arguments similar to gtest. */
 	printf("[==========] Running %u tests from %u test cases.\n",
-	       __test_count, __fixture_count + 1);
-	for (t = __test_list; t; t = t->next) {
-		count++;
-		__run_test(t);
-		if (t->passed)
-			pass_count++;
-		else
-			ret = 1;
+	       test_count, case_count);
+	for (f = __fixture_list; f; f = f->next) {
+		for (v = f->variant ?: &no_variant; v; v = v->next) {
+			for (t = f->tests; t; t = t->next) {
+				count++;
+				__run_test(f, v, t);
+				if (t->passed)
+					pass_count++;
+				else
+					ret = 1;
+			}
+		}
 	}
 	printf("[==========] %u / %u tests passed.\n", pass_count, count);
 	printf("[  %s  ]\n", (ret ? "FAILED" : "PASSED"));
diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore
index a9b2b48947ff..222e50104296 100644
--- a/tools/testing/selftests/kvm/.gitignore
+++ b/tools/testing/selftests/kvm/.gitignore
@@ -7,7 +7,6 @@
 /x86_64/hyperv_cpuid
 /x86_64/mmio_warning_test
 /x86_64/platform_info_test
-/x86_64/set_memory_region_test
 /x86_64/set_sregs_test
 /x86_64/smm_test
 /x86_64/state_test
@@ -22,4 +21,5 @@
 /demand_paging_test
 /dirty_log_test
 /kvm_create_max_vcpus
+/set_memory_region_test
 /steal_time
diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile
index 712a2ddd2a27..7af62030c12f 100644
--- a/tools/testing/selftests/kvm/Makefile
+++ b/tools/testing/selftests/kvm/Makefile
@@ -17,7 +17,6 @@ TEST_GEN_PROGS_x86_64 += x86_64/evmcs_test
 TEST_GEN_PROGS_x86_64 += x86_64/hyperv_cpuid
 TEST_GEN_PROGS_x86_64 += x86_64/mmio_warning_test
 TEST_GEN_PROGS_x86_64 += x86_64/platform_info_test
-TEST_GEN_PROGS_x86_64 += x86_64/set_memory_region_test
 TEST_GEN_PROGS_x86_64 += x86_64/set_sregs_test
 TEST_GEN_PROGS_x86_64 += x86_64/smm_test
 TEST_GEN_PROGS_x86_64 += x86_64/state_test
@@ -32,12 +31,14 @@ TEST_GEN_PROGS_x86_64 += clear_dirty_log_test
 TEST_GEN_PROGS_x86_64 += demand_paging_test
 TEST_GEN_PROGS_x86_64 += dirty_log_test
 TEST_GEN_PROGS_x86_64 += kvm_create_max_vcpus
+TEST_GEN_PROGS_x86_64 += set_memory_region_test
 TEST_GEN_PROGS_x86_64 += steal_time
 
 TEST_GEN_PROGS_aarch64 += clear_dirty_log_test
 TEST_GEN_PROGS_aarch64 += demand_paging_test
 TEST_GEN_PROGS_aarch64 += dirty_log_test
 TEST_GEN_PROGS_aarch64 += kvm_create_max_vcpus
+TEST_GEN_PROGS_aarch64 += set_memory_region_test
 TEST_GEN_PROGS_aarch64 += steal_time
 
 TEST_GEN_PROGS_s390x = s390x/memop
@@ -46,6 +47,7 @@ TEST_GEN_PROGS_s390x += s390x/sync_regs_test
 TEST_GEN_PROGS_s390x += demand_paging_test
 TEST_GEN_PROGS_s390x += dirty_log_test
 TEST_GEN_PROGS_s390x += kvm_create_max_vcpus
+TEST_GEN_PROGS_s390x += set_memory_region_test
 
 TEST_GEN_PROGS += $(TEST_GEN_PROGS_$(UNAME_M))
 LIBKVM += $(LIBKVM_$(UNAME_M))
diff --git a/tools/testing/selftests/kvm/include/kvm_util.h b/tools/testing/selftests/kvm/include/kvm_util.h
index a99b875f50d2..53b11d725d81 100644
--- a/tools/testing/selftests/kvm/include/kvm_util.h
+++ b/tools/testing/selftests/kvm/include/kvm_util.h
@@ -10,6 +10,7 @@
 #include "test_util.h"
 
 #include "asm/kvm.h"
+#include "linux/list.h"
 #include "linux/kvm.h"
 #include <sys/ioctl.h>
 
@@ -113,6 +114,7 @@ int _vcpu_ioctl(struct kvm_vm *vm, uint32_t vcpuid, unsigned long ioctl,
 void vm_ioctl(struct kvm_vm *vm, unsigned long ioctl, void *arg);
 void vm_mem_region_set_flags(struct kvm_vm *vm, uint32_t slot, uint32_t flags);
 void vm_mem_region_move(struct kvm_vm *vm, uint32_t slot, uint64_t new_gpa);
+void vm_mem_region_delete(struct kvm_vm *vm, uint32_t slot);
 void vm_vcpu_add(struct kvm_vm *vm, uint32_t vcpuid);
 vm_vaddr_t vm_vaddr_alloc(struct kvm_vm *vm, size_t sz, vm_vaddr_t vaddr_min,
 			  uint32_t data_memslot, uint32_t pgd_memslot);
@@ -254,6 +256,7 @@ bool vm_is_unrestricted_guest(struct kvm_vm *vm);
 unsigned int vm_get_page_size(struct kvm_vm *vm);
 unsigned int vm_get_page_shift(struct kvm_vm *vm);
 unsigned int vm_get_max_gfn(struct kvm_vm *vm);
+int vm_get_fd(struct kvm_vm *vm);
 
 unsigned int vm_calc_num_guest_pages(enum vm_guest_mode mode, size_t size);
 unsigned int vm_num_host_pages(enum vm_guest_mode mode, unsigned int num_guest_pages);
@@ -311,11 +314,26 @@ uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc);
 
 #define GUEST_SYNC(stage)	ucall(UCALL_SYNC, 2, "hello", stage)
 #define GUEST_DONE()		ucall(UCALL_DONE, 0)
-#define GUEST_ASSERT(_condition) do {			\
-	if (!(_condition))				\
-		ucall(UCALL_ABORT, 2,			\
-			"Failed guest assert: "		\
-			#_condition, __LINE__);		\
+#define __GUEST_ASSERT(_condition, _nargs, _args...) do {	\
+	if (!(_condition))					\
+		ucall(UCALL_ABORT, 2 + _nargs,			\
+			"Failed guest assert: "			\
+			#_condition, __LINE__, _args);		\
 } while (0)
 
+#define GUEST_ASSERT(_condition) \
+	__GUEST_ASSERT((_condition), 0, 0)
+
+#define GUEST_ASSERT_1(_condition, arg1) \
+	__GUEST_ASSERT((_condition), 1, (arg1))
+
+#define GUEST_ASSERT_2(_condition, arg1, arg2) \
+	__GUEST_ASSERT((_condition), 2, (arg1), (arg2))
+
+#define GUEST_ASSERT_3(_condition, arg1, arg2, arg3) \
+	__GUEST_ASSERT((_condition), 3, (arg1), (arg2), (arg3))
+
+#define GUEST_ASSERT_4(_condition, arg1, arg2, arg3, arg4) \
+	__GUEST_ASSERT((_condition), 4, (arg1), (arg2), (arg3), (arg4))
+
 #endif /* SELFTEST_KVM_UTIL_H */
diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c
index 8a3523d4434f..33ab0a36d230 100644
--- a/tools/testing/selftests/kvm/lib/kvm_util.c
+++ b/tools/testing/selftests/kvm/lib/kvm_util.c
@@ -161,6 +161,9 @@ struct kvm_vm *_vm_create(enum vm_guest_mode mode, uint64_t phy_pages, int perm)
 	vm = calloc(1, sizeof(*vm));
 	TEST_ASSERT(vm != NULL, "Insufficient Memory");
 
+	INIT_LIST_HEAD(&vm->vcpus);
+	INIT_LIST_HEAD(&vm->userspace_mem_regions);
+
 	vm->mode = mode;
 	vm->type = 0;
 
@@ -258,8 +261,7 @@ void kvm_vm_restart(struct kvm_vm *vmp, int perm)
 	if (vmp->has_irqchip)
 		vm_create_irqchip(vmp);
 
-	for (region = vmp->userspace_mem_region_head; region;
-		region = region->next) {
+	list_for_each_entry(region, &vmp->userspace_mem_regions, list) {
 		int ret = ioctl(vmp->fd, KVM_SET_USER_MEMORY_REGION, &region->region);
 		TEST_ASSERT(ret == 0, "KVM_SET_USER_MEMORY_REGION IOCTL failed,\n"
 			    "  rc: %i errno: %i\n"
@@ -319,8 +321,7 @@ userspace_mem_region_find(struct kvm_vm *vm, uint64_t start, uint64_t end)
 {
 	struct userspace_mem_region *region;
 
-	for (region = vm->userspace_mem_region_head; region;
-		region = region->next) {
+	list_for_each_entry(region, &vm->userspace_mem_regions, list) {
 		uint64_t existing_start = region->region.guest_phys_addr;
 		uint64_t existing_end = region->region.guest_phys_addr
 			+ region->region.memory_size - 1;
@@ -378,11 +379,11 @@ kvm_userspace_memory_region_find(struct kvm_vm *vm, uint64_t start,
  */
 struct vcpu *vcpu_find(struct kvm_vm *vm, uint32_t vcpuid)
 {
-	struct vcpu *vcpup;
+	struct vcpu *vcpu;
 
-	for (vcpup = vm->vcpu_head; vcpup; vcpup = vcpup->next) {
-		if (vcpup->id == vcpuid)
-			return vcpup;
+	list_for_each_entry(vcpu, &vm->vcpus, list) {
+		if (vcpu->id == vcpuid)
+			return vcpu;
 	}
 
 	return NULL;
@@ -392,18 +393,16 @@ struct vcpu *vcpu_find(struct kvm_vm *vm, uint32_t vcpuid)
  * VM VCPU Remove
  *
  * Input Args:
- *   vm - Virtual Machine
- *   vcpuid - VCPU ID
+ *   vcpu - VCPU to remove
  *
  * Output Args: None
  *
  * Return: None, TEST_ASSERT failures for all error conditions
  *
- * Within the VM specified by vm, removes the VCPU given by vcpuid.
+ * Removes a vCPU from a VM and frees its resources.
  */
-static void vm_vcpu_rm(struct kvm_vm *vm, uint32_t vcpuid)
+static void vm_vcpu_rm(struct vcpu *vcpu)
 {
-	struct vcpu *vcpu = vcpu_find(vm, vcpuid);
 	int ret;
 
 	ret = munmap(vcpu->state, sizeof(*vcpu->state));
@@ -413,21 +412,17 @@ static void vm_vcpu_rm(struct kvm_vm *vm, uint32_t vcpuid)
 	TEST_ASSERT(ret == 0, "Close of VCPU fd failed, rc: %i "
 		"errno: %i", ret, errno);
 
-	if (vcpu->next)
-		vcpu->next->prev = vcpu->prev;
-	if (vcpu->prev)
-		vcpu->prev->next = vcpu->next;
-	else
-		vm->vcpu_head = vcpu->next;
+	list_del(&vcpu->list);
 	free(vcpu);
 }
 
 void kvm_vm_release(struct kvm_vm *vmp)
 {
+	struct vcpu *vcpu, *tmp;
 	int ret;
 
-	while (vmp->vcpu_head)
-		vm_vcpu_rm(vmp, vmp->vcpu_head->id);
+	list_for_each_entry_safe(vcpu, tmp, &vmp->vcpus, list)
+		vm_vcpu_rm(vcpu);
 
 	ret = close(vmp->fd);
 	TEST_ASSERT(ret == 0, "Close of vm fd failed,\n"
@@ -438,35 +433,38 @@ void kvm_vm_release(struct kvm_vm *vmp)
 		"  vmp->kvm_fd: %i rc: %i errno: %i", vmp->kvm_fd, ret, errno);
 }
 
+static void __vm_mem_region_delete(struct kvm_vm *vm,
+				   struct userspace_mem_region *region)
+{
+	int ret;
+
+	list_del(&region->list);
+
+	region->region.memory_size = 0;
+	ret = ioctl(vm->fd, KVM_SET_USER_MEMORY_REGION, &region->region);
+	TEST_ASSERT(ret == 0, "KVM_SET_USER_MEMORY_REGION IOCTL failed, "
+		    "rc: %i errno: %i", ret, errno);
+
+	sparsebit_free(&region->unused_phy_pages);
+	ret = munmap(region->mmap_start, region->mmap_size);
+	TEST_ASSERT(ret == 0, "munmap failed, rc: %i errno: %i", ret, errno);
+
+	free(region);
+}
+
 /*
  * Destroys and frees the VM pointed to by vmp.
  */
 void kvm_vm_free(struct kvm_vm *vmp)
 {
-	int ret;
+	struct userspace_mem_region *region, *tmp;
 
 	if (vmp == NULL)
 		return;
 
 	/* Free userspace_mem_regions. */
-	while (vmp->userspace_mem_region_head) {
-		struct userspace_mem_region *region
-			= vmp->userspace_mem_region_head;
-
-		region->region.memory_size = 0;
-		ret = ioctl(vmp->fd, KVM_SET_USER_MEMORY_REGION,
-			&region->region);
-		TEST_ASSERT(ret == 0, "KVM_SET_USER_MEMORY_REGION IOCTL failed, "
-			"rc: %i errno: %i", ret, errno);
-
-		vmp->userspace_mem_region_head = region->next;
-		sparsebit_free(&region->unused_phy_pages);
-		ret = munmap(region->mmap_start, region->mmap_size);
-		TEST_ASSERT(ret == 0, "munmap failed, rc: %i errno: %i",
-			    ret, errno);
-
-		free(region);
-	}
+	list_for_each_entry_safe(region, tmp, &vmp->userspace_mem_regions, list)
+		__vm_mem_region_delete(vmp, region);
 
 	/* Free sparsebit arrays. */
 	sparsebit_free(&vmp->vpages_valid);
@@ -612,12 +610,10 @@ void vm_userspace_mem_region_add(struct kvm_vm *vm,
 			(uint64_t) region->region.memory_size);
 
 	/* Confirm no region with the requested slot already exists. */
-	for (region = vm->userspace_mem_region_head; region;
-		region = region->next) {
-		if (region->region.slot == slot)
-			break;
-	}
-	if (region != NULL)
+	list_for_each_entry(region, &vm->userspace_mem_regions, list) {
+		if (region->region.slot != slot)
+			continue;
+
 		TEST_FAIL("A mem region with the requested slot "
 			"already exists.\n"
 			"  requested slot: %u paddr: 0x%lx npages: 0x%lx\n"
@@ -626,6 +622,7 @@ void vm_userspace_mem_region_add(struct kvm_vm *vm,
 			region->region.slot,
 			(uint64_t) region->region.guest_phys_addr,
 			(uint64_t) region->region.memory_size);
+	}
 
 	/* Allocate and initialize new mem region structure. */
 	region = calloc(1, sizeof(*region));
@@ -686,10 +683,7 @@ void vm_userspace_mem_region_add(struct kvm_vm *vm,
 		guest_paddr, (uint64_t) region->region.memory_size);
 
 	/* Add to linked-list of memory regions. */
-	if (vm->userspace_mem_region_head)
-		vm->userspace_mem_region_head->prev = region;
-	region->next = vm->userspace_mem_region_head;
-	vm->userspace_mem_region_head = region;
+	list_add(&region->list, &vm->userspace_mem_regions);
 }
 
 /*
@@ -712,20 +706,17 @@ memslot2region(struct kvm_vm *vm, uint32_t memslot)
 {
 	struct userspace_mem_region *region;
 
-	for (region = vm->userspace_mem_region_head; region;
-		region = region->next) {
+	list_for_each_entry(region, &vm->userspace_mem_regions, list) {
 		if (region->region.slot == memslot)
-			break;
-	}
-	if (region == NULL) {
-		fprintf(stderr, "No mem region with the requested slot found,\n"
-			"  requested slot: %u\n", memslot);
-		fputs("---- vm dump ----\n", stderr);
-		vm_dump(stderr, vm, 2);
-		TEST_FAIL("Mem region not found");
+			return region;
 	}
 
-	return region;
+	fprintf(stderr, "No mem region with the requested slot found,\n"
+		"  requested slot: %u\n", memslot);
+	fputs("---- vm dump ----\n", stderr);
+	vm_dump(stderr, vm, 2);
+	TEST_FAIL("Mem region not found");
+	return NULL;
 }
 
 /*
@@ -788,6 +779,24 @@ void vm_mem_region_move(struct kvm_vm *vm, uint32_t slot, uint64_t new_gpa)
 		    ret, errno, slot, new_gpa);
 }
 
+/*
+ * VM Memory Region Delete
+ *
+ * Input Args:
+ *   vm - Virtual Machine
+ *   slot - Slot of the memory region to delete
+ *
+ * Output Args: None
+ *
+ * Return: None
+ *
+ * Delete a memory region.
+ */
+void vm_mem_region_delete(struct kvm_vm *vm, uint32_t slot)
+{
+	__vm_mem_region_delete(vm, memslot2region(vm, slot));
+}
+
 /*
  * VCPU mmap Size
  *
@@ -863,10 +872,7 @@ void vm_vcpu_add(struct kvm_vm *vm, uint32_t vcpuid)
 		"vcpu id: %u errno: %i", vcpuid, errno);
 
 	/* Add to linked-list of VCPUs. */
-	if (vm->vcpu_head)
-		vm->vcpu_head->prev = vcpu;
-	vcpu->next = vm->vcpu_head;
-	vm->vcpu_head = vcpu;
+	list_add(&vcpu->list, &vm->vcpus);
 }
 
 /*
@@ -1059,8 +1065,8 @@ void virt_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr,
 void *addr_gpa2hva(struct kvm_vm *vm, vm_paddr_t gpa)
 {
 	struct userspace_mem_region *region;
-	for (region = vm->userspace_mem_region_head; region;
-	     region = region->next) {
+
+	list_for_each_entry(region, &vm->userspace_mem_regions, list) {
 		if ((gpa >= region->region.guest_phys_addr)
 			&& (gpa <= (region->region.guest_phys_addr
 				+ region->region.memory_size - 1)))
@@ -1092,8 +1098,8 @@ void *addr_gpa2hva(struct kvm_vm *vm, vm_paddr_t gpa)
 vm_paddr_t addr_hva2gpa(struct kvm_vm *vm, void *hva)
 {
 	struct userspace_mem_region *region;
-	for (region = vm->userspace_mem_region_head; region;
-	     region = region->next) {
+
+	list_for_each_entry(region, &vm->userspace_mem_regions, list) {
 		if ((hva >= region->host_mem)
 			&& (hva <= (region->host_mem
 				+ region->region.memory_size - 1)))
@@ -1520,8 +1526,7 @@ void vm_dump(FILE *stream, struct kvm_vm *vm, uint8_t indent)
 	fprintf(stream, "%*sfd: %i\n", indent, "", vm->fd);
 	fprintf(stream, "%*spage_size: 0x%x\n", indent, "", vm->page_size);
 	fprintf(stream, "%*sMem Regions:\n", indent, "");
-	for (region = vm->userspace_mem_region_head; region;
-		region = region->next) {
+	list_for_each_entry(region, &vm->userspace_mem_regions, list) {
 		fprintf(stream, "%*sguest_phys: 0x%lx size: 0x%lx "
 			"host_virt: %p\n", indent + 2, "",
 			(uint64_t) region->region.guest_phys_addr,
@@ -1540,7 +1545,7 @@ void vm_dump(FILE *stream, struct kvm_vm *vm, uint8_t indent)
 		virt_dump(stream, vm, indent + 4);
 	}
 	fprintf(stream, "%*sVCPUs:\n", indent, "");
-	for (vcpu = vm->vcpu_head; vcpu; vcpu = vcpu->next)
+	list_for_each_entry(vcpu, &vm->vcpus, list)
 		vcpu_dump(stream, vm, vcpu->id, indent + 2);
 }
 
@@ -1734,6 +1739,11 @@ unsigned int vm_get_max_gfn(struct kvm_vm *vm)
 	return vm->max_gfn;
 }
 
+int vm_get_fd(struct kvm_vm *vm)
+{
+	return vm->fd;
+}
+
 static unsigned int vm_calc_num_pages(unsigned int num_pages,
 				      unsigned int page_shift,
 				      unsigned int new_page_shift,
diff --git a/tools/testing/selftests/kvm/lib/kvm_util_internal.h b/tools/testing/selftests/kvm/lib/kvm_util_internal.h
index ca56a0133127..2ef446520748 100644
--- a/tools/testing/selftests/kvm/lib/kvm_util_internal.h
+++ b/tools/testing/selftests/kvm/lib/kvm_util_internal.h
@@ -13,7 +13,6 @@
 #define KVM_DEV_PATH		"/dev/kvm"
 
 struct userspace_mem_region {
-	struct userspace_mem_region *next, *prev;
 	struct kvm_userspace_memory_region region;
 	struct sparsebit *unused_phy_pages;
 	int fd;
@@ -21,10 +20,11 @@ struct userspace_mem_region {
 	void *host_mem;
 	void *mmap_start;
 	size_t mmap_size;
+	struct list_head list;
 };
 
 struct vcpu {
-	struct vcpu *next, *prev;
+	struct list_head list;
 	uint32_t id;
 	int fd;
 	struct kvm_run *state;
@@ -41,8 +41,8 @@ struct kvm_vm {
 	unsigned int pa_bits;
 	unsigned int va_bits;
 	uint64_t max_gfn;
-	struct vcpu *vcpu_head;
-	struct userspace_mem_region *userspace_mem_region_head;
+	struct list_head vcpus;
+	struct list_head userspace_mem_regions;
 	struct sparsebit *vpages_valid;
 	struct sparsebit *vpages_mapped;
 	bool has_irqchip;
diff --git a/tools/testing/selftests/kvm/lib/s390x/processor.c b/tools/testing/selftests/kvm/lib/s390x/processor.c
index 8d94961bd046..a88c5d665725 100644
--- a/tools/testing/selftests/kvm/lib/s390x/processor.c
+++ b/tools/testing/selftests/kvm/lib/s390x/processor.c
@@ -233,7 +233,10 @@ void vcpu_args_set(struct kvm_vm *vm, uint32_t vcpuid, unsigned int num, ...)
 
 void vcpu_dump(FILE *stream, struct kvm_vm *vm, uint32_t vcpuid, uint8_t indent)
 {
-	struct vcpu *vcpu = vm->vcpu_head;
+	struct vcpu *vcpu = vcpu_find(vm, vcpuid);
+
+	if (!vcpu)
+		return;
 
 	fprintf(stream, "%*spstate: psw: 0x%.16llx:0x%.16llx\n",
 		indent, "", vcpu->state->psw_mask, vcpu->state->psw_addr);
diff --git a/tools/testing/selftests/kvm/set_memory_region_test.c b/tools/testing/selftests/kvm/set_memory_region_test.c
new file mode 100644
index 000000000000..b3ece55a2da6
--- /dev/null
+++ b/tools/testing/selftests/kvm/set_memory_region_test.c
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: GPL-2.0
+#define _GNU_SOURCE /* for program_invocation_short_name */
+#include <fcntl.h>
+#include <pthread.h>
+#include <sched.h>
+#include <semaphore.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+
+#include <linux/compiler.h>
+
+#include <test_util.h>
+#include <kvm_util.h>
+#include <processor.h>
+
+#define VCPU_ID 0
+
+/*
+ * s390x needs at least 1MB alignment, and the x86_64 MOVE/DELETE tests need a
+ * 2MB sized and aligned region so that the initial region corresponds to
+ * exactly one large page.
+ */
+#define MEM_REGION_SIZE		0x200000
+
+#ifdef __x86_64__
+/*
+ * Somewhat arbitrary location and slot, intended to not overlap anything.
+ */
+#define MEM_REGION_GPA		0xc0000000
+#define MEM_REGION_SLOT		10
+
+static const uint64_t MMIO_VAL = 0xbeefull;
+
+extern const uint64_t final_rip_start;
+extern const uint64_t final_rip_end;
+
+static sem_t vcpu_ready;
+
+static inline uint64_t guest_spin_on_val(uint64_t spin_val)
+{
+	uint64_t val;
+
+	do {
+		val = READ_ONCE(*((uint64_t *)MEM_REGION_GPA));
+	} while (val == spin_val);
+
+	GUEST_SYNC(0);
+	return val;
+}
+
+static void *vcpu_worker(void *data)
+{
+	struct kvm_vm *vm = data;
+	struct kvm_run *run;
+	struct ucall uc;
+	uint64_t cmd;
+
+	/*
+	 * Loop until the guest is done.  Re-enter the guest on all MMIO exits,
+	 * which will occur if the guest attempts to access a memslot after it
+	 * has been deleted or while it is being moved .
+	 */
+	run = vcpu_state(vm, VCPU_ID);
+
+	while (1) {
+		vcpu_run(vm, VCPU_ID);
+
+		if (run->exit_reason == KVM_EXIT_IO) {
+			cmd = get_ucall(vm, VCPU_ID, &uc);
+			if (cmd != UCALL_SYNC)
+				break;
+
+			sem_post(&vcpu_ready);
+			continue;
+		}
+
+		if (run->exit_reason != KVM_EXIT_MMIO)
+			break;
+
+		TEST_ASSERT(!run->mmio.is_write, "Unexpected exit mmio write");
+		TEST_ASSERT(run->mmio.len == 8,
+			    "Unexpected exit mmio size = %u", run->mmio.len);
+
+		TEST_ASSERT(run->mmio.phys_addr == MEM_REGION_GPA,
+			    "Unexpected exit mmio address = 0x%llx",
+			    run->mmio.phys_addr);
+		memcpy(run->mmio.data, &MMIO_VAL, 8);
+	}
+
+	if (run->exit_reason == KVM_EXIT_IO && cmd == UCALL_ABORT)
+		TEST_FAIL("%s at %s:%ld, val = %lu", (const char *)uc.args[0],
+			  __FILE__, uc.args[1], uc.args[2]);
+
+	return NULL;
+}
+
+static void wait_for_vcpu(void)
+{
+	struct timespec ts;
+
+	TEST_ASSERT(!clock_gettime(CLOCK_REALTIME, &ts),
+		    "clock_gettime() failed: %d\n", errno);
+
+	ts.tv_sec += 2;
+	TEST_ASSERT(!sem_timedwait(&vcpu_ready, &ts),
+		    "sem_timedwait() failed: %d\n", errno);
+
+	/* Wait for the vCPU thread to reenter the guest. */
+	usleep(100000);
+}
+
+static struct kvm_vm *spawn_vm(pthread_t *vcpu_thread, void *guest_code)
+{
+	struct kvm_vm *vm;
+	uint64_t *hva;
+	uint64_t gpa;
+
+	vm = vm_create_default(VCPU_ID, 0, guest_code);
+
+	vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid());
+
+	vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS_THP,
+				    MEM_REGION_GPA, MEM_REGION_SLOT,
+				    MEM_REGION_SIZE / getpagesize(), 0);
+
+	/*
+	 * Allocate and map two pages so that the GPA accessed by guest_code()
+	 * stays valid across the memslot move.
+	 */
+	gpa = vm_phy_pages_alloc(vm, 2, MEM_REGION_GPA, MEM_REGION_SLOT);
+	TEST_ASSERT(gpa == MEM_REGION_GPA, "Failed vm_phy_pages_alloc\n");
+
+	virt_map(vm, MEM_REGION_GPA, MEM_REGION_GPA, 2, 0);
+
+	/* Ditto for the host mapping so that both pages can be zeroed. */
+	hva = addr_gpa2hva(vm, MEM_REGION_GPA);
+	memset(hva, 0, 2 * 4096);
+
+	pthread_create(vcpu_thread, NULL, vcpu_worker, vm);
+
+	/* Ensure the guest thread is spun up. */
+	wait_for_vcpu();
+
+	return vm;
+}
+
+
+static void guest_code_move_memory_region(void)
+{
+	uint64_t val;
+
+	GUEST_SYNC(0);
+
+	/*
+	 * Spin until the memory region is moved to a misaligned address.  This
+	 * may or may not trigger MMIO, as the window where the memslot is
+	 * invalid is quite small.
+	 */
+	val = guest_spin_on_val(0);
+	GUEST_ASSERT_1(val == 1 || val == MMIO_VAL, val);
+
+	/* Spin until the memory region is realigned. */
+	val = guest_spin_on_val(MMIO_VAL);
+	GUEST_ASSERT_1(val == 1, val);
+
+	GUEST_DONE();
+}
+
+static void test_move_memory_region(void)
+{
+	pthread_t vcpu_thread;
+	struct kvm_vm *vm;
+	uint64_t *hva;
+
+	vm = spawn_vm(&vcpu_thread, guest_code_move_memory_region);
+
+	hva = addr_gpa2hva(vm, MEM_REGION_GPA);
+
+	/*
+	 * Shift the region's base GPA.  The guest should not see "2" as the
+	 * hva->gpa translation is misaligned, i.e. the guest is accessing a
+	 * different host pfn.
+	 */
+	vm_mem_region_move(vm, MEM_REGION_SLOT, MEM_REGION_GPA - 4096);
+	WRITE_ONCE(*hva, 2);
+
+	/*
+	 * The guest _might_ see an invalid memslot and trigger MMIO, but it's
+	 * a tiny window.  Spin and defer the sync until the memslot is
+	 * restored and guest behavior is once again deterministic.
+	 */
+	usleep(100000);
+
+	/*
+	 * Note, value in memory needs to be changed *before* restoring the
+	 * memslot, else the guest could race the update and see "2".
+	 */
+	WRITE_ONCE(*hva, 1);
+
+	/* Restore the original base, the guest should see "1". */
+	vm_mem_region_move(vm, MEM_REGION_SLOT, MEM_REGION_GPA);
+	wait_for_vcpu();
+	/* Defered sync from when the memslot was misaligned (above). */
+	wait_for_vcpu();
+
+	pthread_join(vcpu_thread, NULL);
+
+	kvm_vm_free(vm);
+}
+
+static void guest_code_delete_memory_region(void)
+{
+	uint64_t val;
+
+	GUEST_SYNC(0);
+
+	/* Spin until the memory region is deleted. */
+	val = guest_spin_on_val(0);
+	GUEST_ASSERT_1(val == MMIO_VAL, val);
+
+	/* Spin until the memory region is recreated. */
+	val = guest_spin_on_val(MMIO_VAL);
+	GUEST_ASSERT_1(val == 0, val);
+
+	/* Spin until the memory region is deleted. */
+	val = guest_spin_on_val(0);
+	GUEST_ASSERT_1(val == MMIO_VAL, val);
+
+	asm("1:\n\t"
+	    ".pushsection .rodata\n\t"
+	    ".global final_rip_start\n\t"
+	    "final_rip_start: .quad 1b\n\t"
+	    ".popsection");
+
+	/* Spin indefinitely (until the code memslot is deleted). */
+	guest_spin_on_val(MMIO_VAL);
+
+	asm("1:\n\t"
+	    ".pushsection .rodata\n\t"
+	    ".global final_rip_end\n\t"
+	    "final_rip_end: .quad 1b\n\t"
+	    ".popsection");
+
+	GUEST_ASSERT_1(0, 0);
+}
+
+static void test_delete_memory_region(void)
+{
+	pthread_t vcpu_thread;
+	struct kvm_regs regs;
+	struct kvm_run *run;
+	struct kvm_vm *vm;
+
+	vm = spawn_vm(&vcpu_thread, guest_code_delete_memory_region);
+
+	/* Delete the memory region, the guest should not die. */
+	vm_mem_region_delete(vm, MEM_REGION_SLOT);
+	wait_for_vcpu();
+
+	/* Recreate the memory region.  The guest should see "0". */
+	vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS_THP,
+				    MEM_REGION_GPA, MEM_REGION_SLOT,
+				    MEM_REGION_SIZE / getpagesize(), 0);
+	wait_for_vcpu();
+
+	/* Delete the region again so that there's only one memslot left. */
+	vm_mem_region_delete(vm, MEM_REGION_SLOT);
+	wait_for_vcpu();
+
+	/*
+	 * Delete the primary memslot.  This should cause an emulation error or
+	 * shutdown due to the page tables getting nuked.
+	 */
+	vm_mem_region_delete(vm, 0);
+
+	pthread_join(vcpu_thread, NULL);
+
+	run = vcpu_state(vm, VCPU_ID);
+
+	TEST_ASSERT(run->exit_reason == KVM_EXIT_SHUTDOWN ||
+		    run->exit_reason == KVM_EXIT_INTERNAL_ERROR,
+		    "Unexpected exit reason = %d", run->exit_reason);
+
+	vcpu_regs_get(vm, VCPU_ID, &regs);
+
+	/*
+	 * On AMD, after KVM_EXIT_SHUTDOWN the VMCB has been reinitialized already,
+	 * so the instruction pointer would point to the reset vector.
+	 */
+	if (run->exit_reason == KVM_EXIT_INTERNAL_ERROR)
+		TEST_ASSERT(regs.rip >= final_rip_start &&
+			    regs.rip < final_rip_end,
+			    "Bad rip, expected 0x%lx - 0x%lx, got 0x%llx\n",
+			    final_rip_start, final_rip_end, regs.rip);
+
+	kvm_vm_free(vm);
+}
+
+static void test_zero_memory_regions(void)
+{
+	struct kvm_run *run;
+	struct kvm_vm *vm;
+
+	pr_info("Testing KVM_RUN with zero added memory regions\n");
+
+	vm = vm_create(VM_MODE_DEFAULT, 0, O_RDWR);
+	vm_vcpu_add(vm, VCPU_ID);
+
+	TEST_ASSERT(!ioctl(vm_get_fd(vm), KVM_SET_NR_MMU_PAGES, 64),
+		    "KVM_SET_NR_MMU_PAGES failed, errno = %d\n", errno);
+	vcpu_run(vm, VCPU_ID);
+
+	run = vcpu_state(vm, VCPU_ID);
+	TEST_ASSERT(run->exit_reason == KVM_EXIT_INTERNAL_ERROR,
+		    "Unexpected exit_reason = %u\n", run->exit_reason);
+
+	kvm_vm_free(vm);
+}
+#endif /* __x86_64__ */
+
+/*
+ * Test it can be added memory slots up to KVM_CAP_NR_MEMSLOTS, then any
+ * tentative to add further slots should fail.
+ */
+static void test_add_max_memory_regions(void)
+{
+	int ret;
+	struct kvm_vm *vm;
+	uint32_t max_mem_slots;
+	uint32_t slot;
+	uint64_t guest_addr = 0x0;
+	uint64_t mem_reg_npages;
+	void *mem;
+
+	max_mem_slots = kvm_check_cap(KVM_CAP_NR_MEMSLOTS);
+	TEST_ASSERT(max_mem_slots > 0,
+		    "KVM_CAP_NR_MEMSLOTS should be greater than 0");
+	pr_info("Allowed number of memory slots: %i\n", max_mem_slots);
+
+	vm = vm_create(VM_MODE_DEFAULT, 0, O_RDWR);
+
+	mem_reg_npages = vm_calc_num_guest_pages(VM_MODE_DEFAULT, MEM_REGION_SIZE);
+
+	/* Check it can be added memory slots up to the maximum allowed */
+	pr_info("Adding slots 0..%i, each memory region with %dK size\n",
+		(max_mem_slots - 1), MEM_REGION_SIZE >> 10);
+	for (slot = 0; slot < max_mem_slots; slot++) {
+		vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS,
+					    guest_addr, slot, mem_reg_npages,
+					    0);
+		guest_addr += MEM_REGION_SIZE;
+	}
+
+	/* Check it cannot be added memory slots beyond the limit */
+	mem = mmap(NULL, MEM_REGION_SIZE, PROT_READ | PROT_WRITE,
+		   MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+	TEST_ASSERT(mem != MAP_FAILED, "Failed to mmap() host");
+
+	ret = ioctl(vm_get_fd(vm), KVM_SET_USER_MEMORY_REGION,
+		    &(struct kvm_userspace_memory_region) {slot, 0, guest_addr,
+		    MEM_REGION_SIZE, (uint64_t) mem});
+	TEST_ASSERT(ret == -1 && errno == EINVAL,
+		    "Adding one more memory slot should fail with EINVAL");
+
+	munmap(mem, MEM_REGION_SIZE);
+	kvm_vm_free(vm);
+}
+
+int main(int argc, char *argv[])
+{
+#ifdef __x86_64__
+	int i, loops;
+#endif
+
+	/* Tell stdout not to buffer its content */
+	setbuf(stdout, NULL);
+
+#ifdef __x86_64__
+	/*
+	 * FIXME: the zero-memslot test fails on aarch64 and s390x because
+	 * KVM_RUN fails with ENOEXEC or EFAULT.
+	 */
+	test_zero_memory_regions();
+#endif
+
+	test_add_max_memory_regions();
+
+#ifdef __x86_64__
+	if (argc > 1)
+		loops = atoi(argv[1]);
+	else
+		loops = 10;
+
+	pr_info("Testing MOVE of in-use region, %d loops\n", loops);
+	for (i = 0; i < loops; i++)
+		test_move_memory_region();
+
+	pr_info("Testing DELETE of in-use region, %d loops\n", loops);
+	for (i = 0; i < loops; i++)
+		test_delete_memory_region();
+#endif
+
+	return 0;
+}
diff --git a/tools/testing/selftests/kvm/x86_64/set_memory_region_test.c b/tools/testing/selftests/kvm/x86_64/set_memory_region_test.c
deleted file mode 100644
index c6691cff4e19..000000000000
--- a/tools/testing/selftests/kvm/x86_64/set_memory_region_test.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#define _GNU_SOURCE /* for program_invocation_short_name */
-#include <fcntl.h>
-#include <pthread.h>
-#include <sched.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-
-#include <linux/compiler.h>
-
-#include <test_util.h>
-#include <kvm_util.h>
-#include <processor.h>
-
-#define VCPU_ID 0
-
-/*
- * Somewhat arbitrary location and slot, intended to not overlap anything.  The
- * location and size are specifically 2mb sized/aligned so that the initial
- * region corresponds to exactly one large page.
- */
-#define MEM_REGION_GPA		0xc0000000
-#define MEM_REGION_SIZE		0x200000
-#define MEM_REGION_SLOT		10
-
-static void guest_code(void)
-{
-	uint64_t val;
-
-	do {
-		val = READ_ONCE(*((uint64_t *)MEM_REGION_GPA));
-	} while (!val);
-
-	if (val != 1)
-		ucall(UCALL_ABORT, 1, val);
-
-	GUEST_DONE();
-}
-
-static void *vcpu_worker(void *data)
-{
-	struct kvm_vm *vm = data;
-	struct kvm_run *run;
-	struct ucall uc;
-	uint64_t cmd;
-
-	/*
-	 * Loop until the guest is done.  Re-enter the guest on all MMIO exits,
-	 * which will occur if the guest attempts to access a memslot while it
-	 * is being moved.
-	 */
-	run = vcpu_state(vm, VCPU_ID);
-	do {
-		vcpu_run(vm, VCPU_ID);
-	} while (run->exit_reason == KVM_EXIT_MMIO);
-
-	TEST_ASSERT(run->exit_reason == KVM_EXIT_IO,
-		    "Unexpected exit reason = %d", run->exit_reason);
-
-	cmd = get_ucall(vm, VCPU_ID, &uc);
-	TEST_ASSERT(cmd == UCALL_DONE, "Unexpected val in guest = %lu", uc.args[0]);
-	return NULL;
-}
-
-static void test_move_memory_region(void)
-{
-	pthread_t vcpu_thread;
-	struct kvm_vm *vm;
-	uint64_t *hva;
-	uint64_t gpa;
-
-	vm = vm_create_default(VCPU_ID, 0, guest_code);
-
-	vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid());
-
-	vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS_THP,
-				    MEM_REGION_GPA, MEM_REGION_SLOT,
-				    MEM_REGION_SIZE / getpagesize(), 0);
-
-	/*
-	 * Allocate and map two pages so that the GPA accessed by guest_code()
-	 * stays valid across the memslot move.
-	 */
-	gpa = vm_phy_pages_alloc(vm, 2, MEM_REGION_GPA, MEM_REGION_SLOT);
-	TEST_ASSERT(gpa == MEM_REGION_GPA, "Failed vm_phy_pages_alloc\n");
-
-	virt_map(vm, MEM_REGION_GPA, MEM_REGION_GPA, 2, 0);
-
-	/* Ditto for the host mapping so that both pages can be zeroed. */
-	hva = addr_gpa2hva(vm, MEM_REGION_GPA);
-	memset(hva, 0, 2 * 4096);
-
-	pthread_create(&vcpu_thread, NULL, vcpu_worker, vm);
-
-	/* Ensure the guest thread is spun up. */
-	usleep(100000);
-
-	/*
-	 * Shift the region's base GPA.  The guest should not see "2" as the
-	 * hva->gpa translation is misaligned, i.e. the guest is accessing a
-	 * different host pfn.
-	 */
-	vm_mem_region_move(vm, MEM_REGION_SLOT, MEM_REGION_GPA - 4096);
-	WRITE_ONCE(*hva, 2);
-
-	usleep(100000);
-
-	/*
-	 * Note, value in memory needs to be changed *before* restoring the
-	 * memslot, else the guest could race the update and see "2".
-	 */
-	WRITE_ONCE(*hva, 1);
-
-	/* Restore the original base, the guest should see "1". */
-	vm_mem_region_move(vm, MEM_REGION_SLOT, MEM_REGION_GPA);
-
-	pthread_join(vcpu_thread, NULL);
-
-	kvm_vm_free(vm);
-}
-
-int main(int argc, char *argv[])
-{
-	int i, loops;
-
-	/* Tell stdout not to buffer its content */
-	setbuf(stdout, NULL);
-
-	if (argc > 1)
-		loops = atoi(argv[1]);
-	else
-		loops = 10;
-
-	for (i = 0; i < loops; i++)
-		test_move_memory_region();
-
-	return 0;
-}
diff --git a/tools/testing/selftests/memfd/Makefile b/tools/testing/selftests/memfd/Makefile
index 187b14cad00c..4da8b565fa32 100644
--- a/tools/testing/selftests/memfd/Makefile
+++ b/tools/testing/selftests/memfd/Makefile
@@ -8,11 +8,21 @@ TEST_GEN_PROGS := memfd_test
 TEST_PROGS := run_fuse_test.sh run_hugetlbfs_test.sh
 TEST_GEN_FILES := fuse_test fuse_mnt
 
-fuse_mnt.o: CFLAGS += $(shell pkg-config fuse --cflags)
+VAR_CFLAGS := $(shell pkg-config fuse --cflags 2>/dev/null)
+ifeq ($(VAR_CFLAGS),)
+VAR_CFLAGS := -D_FILE_OFFSET_BITS=64 -I/usr/include/fuse
+endif
+
+VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null)
+ifeq ($(VAR_LDLIBS),)
+VAR_LDLIBS := -lfuse -pthread
+endif
+
+fuse_mnt.o: CFLAGS += $(VAR_CFLAGS)
 
 include ../lib.mk
 
-$(OUTPUT)/fuse_mnt: LDLIBS += $(shell pkg-config fuse --libs)
+$(OUTPUT)/fuse_mnt: LDLIBS += $(VAR_LDLIBS)
 
 $(OUTPUT)/memfd_test: memfd_test.c common.c
 $(OUTPUT)/fuse_test: fuse_test.c common.c
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 3f386eb9e7d7..895ec992b2f1 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -16,6 +16,7 @@ TEST_PROGS += altnames.sh icmp_redirect.sh ip6_gre_headroom.sh
 TEST_PROGS += route_localnet.sh
 TEST_PROGS += reuseaddr_ports_exhausted.sh
 TEST_PROGS += txtimestamp.sh
+TEST_PROGS += vrf-xfrm-tests.sh
 TEST_PROGS_EXTENDED := in_netns.sh
 TEST_GEN_FILES =  socket nettest
 TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any
diff --git a/tools/testing/selftests/net/fib_nexthops.sh b/tools/testing/selftests/net/fib_nexthops.sh
index 6560ed796ac4..dd0e5fec6367 100755
--- a/tools/testing/selftests/net/fib_nexthops.sh
+++ b/tools/testing/selftests/net/fib_nexthops.sh
@@ -19,8 +19,8 @@ ret=0
 ksft_skip=4
 
 # all tests in this script. Can be overridden with -t option
-IPV4_TESTS="ipv4_fcnal ipv4_grp_fcnal ipv4_withv6_fcnal ipv4_fcnal_runtime"
-IPV6_TESTS="ipv6_fcnal ipv6_grp_fcnal ipv6_fcnal_runtime"
+IPV4_TESTS="ipv4_fcnal ipv4_grp_fcnal ipv4_withv6_fcnal ipv4_fcnal_runtime ipv4_compat_mode"
+IPV6_TESTS="ipv6_fcnal ipv6_grp_fcnal ipv6_fcnal_runtime ipv6_compat_mode"
 
 ALL_TESTS="basic ${IPV4_TESTS} ${IPV6_TESTS}"
 TESTS="${ALL_TESTS}"
@@ -150,31 +150,31 @@ setup()
 	$IP li add veth1 type veth peer name veth2
 	$IP li set veth1 up
 	$IP addr add 172.16.1.1/24 dev veth1
-	$IP -6 addr add 2001:db8:91::1/64 dev veth1
+	$IP -6 addr add 2001:db8:91::1/64 dev veth1 nodad
 
 	$IP li add veth3 type veth peer name veth4
 	$IP li set veth3 up
 	$IP addr add 172.16.2.1/24 dev veth3
-	$IP -6 addr add 2001:db8:92::1/64 dev veth3
+	$IP -6 addr add 2001:db8:92::1/64 dev veth3 nodad
 
 	$IP li set veth2 netns peer up
 	ip -netns peer addr add 172.16.1.2/24 dev veth2
-	ip -netns peer -6 addr add 2001:db8:91::2/64 dev veth2
+	ip -netns peer -6 addr add 2001:db8:91::2/64 dev veth2 nodad
 
 	$IP li set veth4 netns peer up
 	ip -netns peer addr add 172.16.2.2/24 dev veth4
-	ip -netns peer -6 addr add 2001:db8:92::2/64 dev veth4
+	ip -netns peer -6 addr add 2001:db8:92::2/64 dev veth4 nodad
 
 	ip -netns remote li add veth5 type veth peer name veth6
 	ip -netns remote li set veth5 up
 	ip -netns remote addr add dev veth5 172.16.101.1/24
-	ip -netns remote addr add dev veth5 2001:db8:101::1/64
+	ip -netns remote -6 addr add dev veth5 2001:db8:101::1/64 nodad
 	ip -netns remote ro add 172.16.0.0/22 via 172.16.101.2
 	ip -netns remote -6 ro add 2001:db8:90::/40 via 2001:db8:101::2
 
 	ip -netns remote li set veth6 netns peer up
 	ip -netns peer addr add dev veth6 172.16.101.2/24
-	ip -netns peer addr add dev veth6 2001:db8:101::2/64
+	ip -netns peer -6 addr add dev veth6 2001:db8:101::2/64 nodad
 	set +e
 }
 
@@ -248,11 +248,38 @@ check_route6()
 	local expected="$2"
 	local out
 
-	out=$($IP -6 route ls match ${pfx} 2>/dev/null)
+	out=$($IP -6 route ls match ${pfx} 2>/dev/null | sed -e 's/pref medium//')
 
 	check_output "${out}" "${expected}"
 }
 
+start_ip_monitor()
+{
+	local mtype=$1
+
+	# start the monitor in the background
+	tmpfile=`mktemp /var/run/nexthoptestXXX`
+	mpid=`($IP monitor $mtype > $tmpfile & echo $!) 2>/dev/null`
+	sleep 0.2
+	echo "$mpid $tmpfile"
+}
+
+stop_ip_monitor()
+{
+	local mpid=$1
+	local tmpfile=$2
+	local el=$3
+
+	# check the monitor results
+	kill $mpid
+	lines=`wc -l $tmpfile | cut "-d " -f1`
+	test $lines -eq $el
+	rc=$?
+	rm -rf $tmpfile
+
+	return $rc
+}
+
 ################################################################################
 # basic operations (add, delete, replace) on nexthops and nexthop groups
 #
@@ -423,8 +450,6 @@ ipv6_fcnal_runtime()
 	echo "IPv6 functional runtime"
 	echo "-----------------------"
 
-	sleep 5
-
 	#
 	# IPv6 - the basics
 	#
@@ -481,12 +506,12 @@ ipv6_fcnal_runtime()
 	run_cmd "$IP -6 nexthop add id 85 dev veth1"
 	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 85"
 	log_test $? 0 "IPv6 route with device only nexthop"
-	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 85 dev veth1 metric 1024 pref medium"
+	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 85 dev veth1 metric 1024"
 
 	run_cmd "$IP nexthop add id 123 group 81/85"
 	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 123"
 	log_test $? 0 "IPv6 multipath route with nexthop mix - dev only + gw"
-	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 123 metric 1024 nexthop via 2001:db8:91::2 dev veth1 weight 1 nexthop dev veth1 weight 1 pref medium"
+	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 123 metric 1024 nexthop via 2001:db8:91::2 dev veth1 weight 1 nexthop dev veth1 weight 1"
 
 	#
 	# IPv6 route with v4 nexthop - not allowed
@@ -866,6 +891,11 @@ ipv4_fcnal_runtime()
 		$IP neigh sh | grep 'dev veth1'
 	fi
 
+	run_cmd "$IP ro del 172.16.101.1/32 via inet6 ${lladdr} dev veth1"
+	run_cmd "$IP -4 ro add default via inet6 ${lladdr} dev veth1"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "IPv4 default route with IPv6 gateway"
+
 	#
 	# MPLS as an example of LWT encap
 	#
@@ -880,6 +910,173 @@ ipv4_fcnal_runtime()
 	log_test $? 0 "IPv4 route with MPLS encap, v6 gw - check"
 }
 
+sysctl_nexthop_compat_mode_check()
+{
+	local sysctlname="net.ipv4.nexthop_compat_mode"
+	local lprefix=$1
+
+	IPE="ip netns exec me"
+
+	$IPE sysctl -q $sysctlname 2>&1 >/dev/null
+	if [ $? -ne 0 ]; then
+		echo "SKIP: kernel lacks nexthop compat mode sysctl control"
+		return $ksft_skip
+	fi
+
+	out=$($IPE sysctl $sysctlname 2>/dev/null)
+	log_test $? 0 "$lprefix default nexthop compat mode check"
+	check_output "${out}" "$sysctlname = 1"
+}
+
+sysctl_nexthop_compat_mode_set()
+{
+	local sysctlname="net.ipv4.nexthop_compat_mode"
+	local mode=$1
+	local lprefix=$2
+
+	IPE="ip netns exec me"
+
+	out=$($IPE sysctl -w $sysctlname=$mode)
+	log_test $? 0 "$lprefix set compat mode - $mode"
+	check_output "${out}" "net.ipv4.nexthop_compat_mode = $mode"
+}
+
+ipv6_compat_mode()
+{
+	local rc
+
+	echo
+	echo "IPv6 nexthop api compat mode test"
+	echo "--------------------------------"
+
+	sysctl_nexthop_compat_mode_check "IPv6"
+	if [ $? -eq $ksft_skip ]; then
+		return $ksft_skip
+	fi
+
+	run_cmd "$IP nexthop add id 62 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP nexthop add id 63 via 2001:db8:91::3 dev veth1"
+	run_cmd "$IP nexthop add id 122 group 62/63"
+	ipmout=$(start_ip_monitor route)
+
+	run_cmd "$IP -6 ro add 2001:db8:101::1/128 nhid 122"
+	# route add notification should contain expanded nexthops
+	stop_ip_monitor $ipmout 3
+	log_test $? 0 "IPv6 compat mode on - route add notification"
+
+	# route dump should contain expanded nexthops
+	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 122 metric 1024 pref medium nexthop via 2001:db8:91::2 dev veth1 weight 1 nexthop via 2001:db8:91::3 dev veth1 weight 1"
+	log_test $? 0 "IPv6 compat mode on - route dump"
+
+	# change in nexthop group should generate route notification
+	run_cmd "$IP nexthop add id 64 via 2001:db8:91::4 dev veth1"
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop replace id 122 group 62/64"
+	stop_ip_monitor $ipmout 3
+
+	log_test $? 0 "IPv6 compat mode on - nexthop change"
+
+	# set compat mode off
+	sysctl_nexthop_compat_mode_set 0 "IPv6"
+
+	run_cmd "$IP -6 ro del 2001:db8:101::1/128 nhid 122"
+
+	run_cmd "$IP nexthop add id 62 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP nexthop add id 63 via 2001:db8:91::3 dev veth1"
+	run_cmd "$IP nexthop add id 122 group 62/63"
+	ipmout=$(start_ip_monitor route)
+
+	run_cmd "$IP -6 ro add 2001:db8:101::1/128 nhid 122"
+	# route add notification should not contain expanded nexthops
+	stop_ip_monitor $ipmout 1
+	log_test $? 0 "IPv6 compat mode off - route add notification"
+
+	# route dump should not contain expanded nexthops
+	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 122 metric 1024 pref medium"
+	log_test $? 0 "IPv6 compat mode off - route dump"
+
+	# change in nexthop group should not generate route notification
+	run_cmd "$IP nexthop add id 64 via 2001:db8:91::4 dev veth1"
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop replace id 122 group 62/64"
+	stop_ip_monitor $ipmout 0
+	log_test $? 0 "IPv6 compat mode off - nexthop change"
+
+	# nexthop delete should not generate route notification
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop del id 122"
+	stop_ip_monitor $ipmout 0
+	log_test $? 0 "IPv6 compat mode off - nexthop delete"
+
+	# set compat mode back on
+	sysctl_nexthop_compat_mode_set 1 "IPv6"
+}
+
+ipv4_compat_mode()
+{
+	local rc
+
+	echo
+	echo "IPv4 nexthop api compat mode"
+	echo "----------------------------"
+
+	sysctl_nexthop_compat_mode_check "IPv4"
+	if [ $? -eq $ksft_skip ]; then
+		return $ksft_skip
+	fi
+
+	run_cmd "$IP nexthop add id 21 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 22 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 122 group 21/22"
+	ipmout=$(start_ip_monitor route)
+
+	run_cmd "$IP ro add 172.16.101.1/32 nhid 122"
+	stop_ip_monitor $ipmout 3
+
+	# route add notification should contain expanded nexthops
+	log_test $? 0 "IPv4 compat mode on - route add notification"
+
+	# route dump should contain expanded nexthops
+	check_route "172.16.101.1" "172.16.101.1 nhid 122 nexthop via 172.16.1.2 dev veth1 weight 1 nexthop via 172.16.1.2 dev veth1 weight 1"
+	log_test $? 0 "IPv4 compat mode on - route dump"
+
+	# change in nexthop group should generate route notification
+	run_cmd "$IP nexthop add id 23 via 172.16.1.3 dev veth1"
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop replace id 122 group 21/23"
+	stop_ip_monitor $ipmout 3
+	log_test $? 0 "IPv4 compat mode on - nexthop change"
+
+	sysctl_nexthop_compat_mode_set 0 "IPv4"
+
+	# cleanup
+	run_cmd "$IP ro del 172.16.101.1/32 nhid 122"
+
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP ro add 172.16.101.1/32 nhid 122"
+	stop_ip_monitor $ipmout 1
+	# route add notification should not contain expanded nexthops
+	log_test $? 0 "IPv4 compat mode off - route add notification"
+
+	# route dump should not contain expanded nexthops
+	check_route "172.16.101.1" "172.16.101.1 nhid 122"
+	log_test $? 0 "IPv4 compat mode off - route dump"
+
+	# change in nexthop group should not generate route notification
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop replace id 122 group 21/22"
+	stop_ip_monitor $ipmout 0
+	log_test $? 0 "IPv4 compat mode off - nexthop change"
+
+	# nexthop delete should not generate route notification
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop del id 122"
+	stop_ip_monitor $ipmout 0
+	log_test $? 0 "IPv4 compat mode off - nexthop delete"
+
+	sysctl_nexthop_compat_mode_set 1 "IPv4"
+}
+
 basic()
 {
 	echo
diff --git a/tools/testing/selftests/net/forwarding/pedit_dsfield.sh b/tools/testing/selftests/net/forwarding/pedit_dsfield.sh
index b50081855913..1181d647f6a7 100755
--- a/tools/testing/selftests/net/forwarding/pedit_dsfield.sh
+++ b/tools/testing/selftests/net/forwarding/pedit_dsfield.sh
@@ -20,10 +20,14 @@
 
 ALL_TESTS="
 	ping_ipv4
+	ping_ipv6
 	test_ip_dsfield
 	test_ip_dscp
 	test_ip_ecn
 	test_ip_dscp_ecn
+	test_ip6_dsfield
+	test_ip6_dscp
+	test_ip6_ecn
 "
 
 NUM_NETIFS=4
@@ -107,6 +111,11 @@ ping_ipv4()
 	ping_test $h1 192.0.2.2
 }
 
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
 do_test_pedit_dsfield_common()
 {
 	local pedit_locus=$1; shift
@@ -228,6 +237,63 @@ test_ip_dscp_ecn()
 	do_test_ip_dscp_ecn "dev $swp2 egress"
 }
 
+do_test_ip6_dsfield()
+{
+	local locus=$1; shift
+	local dsfield
+
+	for dsfield in 0 1 2 3 128 252 253 254 255; do
+		do_test_pedit_dsfield "$locus"				\
+				  "ip6 traffic_class set $dsfield"	\
+				  ipv6 "ip_tos $dsfield"		\
+				  "-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+	done
+}
+
+test_ip6_dsfield()
+{
+	do_test_ip6_dsfield "dev $swp1 ingress"
+	do_test_ip6_dsfield "dev $swp2 egress"
+}
+
+do_test_ip6_dscp()
+{
+	local locus=$1; shift
+	local dscp
+
+	for dscp in 0 1 2 3 32 61 62 63; do
+		do_test_pedit_dsfield "$locus"				       \
+			    "ip6 traffic_class set $((dscp << 2)) retain 0xfc" \
+			    ipv6 "ip_tos $(((dscp << 2) | 1))"		       \
+			    "-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+	done
+}
+
+test_ip6_dscp()
+{
+	do_test_ip6_dscp "dev $swp1 ingress"
+	do_test_ip6_dscp "dev $swp2 egress"
+}
+
+do_test_ip6_ecn()
+{
+	local locus=$1; shift
+	local ecn
+
+	for ecn in 0 1 2 3; do
+		do_test_pedit_dsfield "$locus"				\
+				"ip6 traffic_class set $ecn retain 0x3"	\
+				ipv6 "ip_tos $((124 | $ecn))"		\
+				"-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+	done
+}
+
+test_ip6_ecn()
+{
+	do_test_ip6_ecn "dev $swp1 ingress"
+	do_test_ip6_ecn "dev $swp2 egress"
+}
+
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/net/forwarding/tc_actions.sh b/tools/testing/selftests/net/forwarding/tc_actions.sh
index 813d02d1939d..d9eca227136b 100755
--- a/tools/testing/selftests/net/forwarding/tc_actions.sh
+++ b/tools/testing/selftests/net/forwarding/tc_actions.sh
@@ -2,7 +2,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ALL_TESTS="gact_drop_and_ok_test mirred_egress_redirect_test \
-	mirred_egress_mirror_test gact_trap_test"
+	mirred_egress_mirror_test matchall_mirred_egress_mirror_test \
+	gact_trap_test"
 NUM_NETIFS=4
 source tc_common.sh
 source lib.sh
@@ -50,6 +51,9 @@ switch_destroy()
 mirred_egress_test()
 {
 	local action=$1
+	local protocol=$2
+	local classifier=$3
+	local classifier_args=$4
 
 	RET=0
 
@@ -62,9 +66,9 @@ mirred_egress_test()
 	tc_check_packets "dev $h2 ingress" 101 1
 	check_fail $? "Matched without redirect rule inserted"
 
-	tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \
-		$tcflags dst_ip 192.0.2.2 action mirred egress $action \
-		dev $swp2
+	tc filter add dev $swp1 ingress protocol $protocol pref 1 handle 101 \
+		$classifier $tcflags $classifier_args \
+		action mirred egress $action dev $swp2
 
 	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
 		-t ip -q
@@ -72,10 +76,11 @@ mirred_egress_test()
 	tc_check_packets "dev $h2 ingress" 101 1
 	check_err $? "Did not match incoming $action packet"
 
-	tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $swp1 ingress protocol $protocol pref 1 handle 101 \
+		$classifier
 	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
 
-	log_test "mirred egress $action ($tcflags)"
+	log_test "mirred egress $classifier $action ($tcflags)"
 }
 
 gact_drop_and_ok_test()
@@ -187,12 +192,17 @@ cleanup()
 
 mirred_egress_redirect_test()
 {
-	mirred_egress_test "redirect"
+	mirred_egress_test "redirect" "ip" "flower" "dst_ip 192.0.2.2"
 }
 
 mirred_egress_mirror_test()
 {
-	mirred_egress_test "mirror"
+	mirred_egress_test "mirror" "ip" "flower" "dst_ip 192.0.2.2"
+}
+
+matchall_mirred_egress_mirror_test()
+{
+	mirred_egress_test "mirror" "all" "matchall" ""
 }
 
 trap cleanup EXIT
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index 71a62e7e35b1..77c09cd339c3 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -67,6 +67,10 @@
 #	Same as pmtu_ipv4_vxlan4, but using a generic UDP IPv4/IPv6
 #	encapsulation (GUE) over IPv4/IPv6, instead of VXLAN
 #
+# - pmtu_ipv{4,6}_ipv{4,6}_exception
+#	Same as pmtu_ipv4_vxlan4, but using a IPv4/IPv6 tunnel over IPv4/IPv6,
+#	instead of VXLAN
+#
 # - pmtu_vti4_exception
 #	Set up vti tunnel on top of veth, with xfrm states and policies, in two
 #	namespaces with matching endpoints. Check that route exception is not
@@ -151,6 +155,10 @@ tests="
 	pmtu_ipv6_gue4_exception	IPv6 over gue4: PMTU exceptions		1
 	pmtu_ipv4_gue6_exception	IPv4 over gue6: PMTU exceptions		1
 	pmtu_ipv6_gue6_exception	IPv6 over gue6: PMTU exceptions		1
+	pmtu_ipv4_ipv4_exception	IPv4 over IPv4: PMTU exceptions		1
+	pmtu_ipv6_ipv4_exception	IPv6 over IPv4: PMTU exceptions		1
+	pmtu_ipv4_ipv6_exception	IPv4 over IPv6: PMTU exceptions		1
+	pmtu_ipv6_ipv6_exception	IPv6 over IPv6: PMTU exceptions		1
 	pmtu_vti6_exception		vti6: PMTU exceptions			0
 	pmtu_vti4_exception		vti4: PMTU exceptions			0
 	pmtu_vti4_default_mtu		vti4: default MTU assignment		0
@@ -363,6 +371,62 @@ setup_gue66() {
 	setup_fou_or_gue 6 6 gue
 }
 
+setup_ipvX_over_ipvY() {
+	inner=${1}
+	outer=${2}
+
+	if [ "${outer}" -eq 4 ]; then
+		a_addr="${prefix4}.${a_r1}.1"
+		b_addr="${prefix4}.${b_r1}.1"
+		if [ "${inner}" -eq 4 ]; then
+			type="ipip"
+			mode="ipip"
+		else
+			type="sit"
+			mode="ip6ip"
+		fi
+	else
+		a_addr="${prefix6}:${a_r1}::1"
+		b_addr="${prefix6}:${b_r1}::1"
+		type="ip6tnl"
+		if [ "${inner}" -eq 4 ]; then
+			mode="ipip6"
+		else
+			mode="ip6ip6"
+		fi
+	fi
+
+	run_cmd ${ns_a} ip link add ip_a type ${type} local ${a_addr} remote ${b_addr} mode ${mode} || return 2
+	run_cmd ${ns_b} ip link add ip_b type ${type} local ${b_addr} remote ${a_addr} mode ${mode}
+
+	run_cmd ${ns_a} ip link set ip_a up
+	run_cmd ${ns_b} ip link set ip_b up
+
+	if [ "${inner}" = "4" ]; then
+		run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ip_a
+		run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ip_b
+	else
+		run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ip_a
+		run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ip_b
+	fi
+}
+
+setup_ip4ip4() {
+	setup_ipvX_over_ipvY 4 4
+}
+
+setup_ip6ip4() {
+	setup_ipvX_over_ipvY 6 4
+}
+
+setup_ip4ip6() {
+	setup_ipvX_over_ipvY 4 6
+}
+
+setup_ip6ip6() {
+	setup_ipvX_over_ipvY 6 6
+}
+
 setup_namespaces() {
 	for n in ${NS_A} ${NS_B} ${NS_R1} ${NS_R2}; do
 		ip netns add ${n} || return 1
@@ -908,6 +972,64 @@ test_pmtu_ipv6_gue6_exception() {
 	test_pmtu_ipvX_over_fouY_or_gueY 6 6 gue
 }
 
+test_pmtu_ipvX_over_ipvY_exception() {
+	inner=${1}
+	outer=${2}
+	ll_mtu=4000
+
+	setup namespaces routing ip${inner}ip${outer} || return 2
+
+	trace "${ns_a}" ip_a         "${ns_b}"  ip_b  \
+	      "${ns_a}" veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B
+
+	if [ ${inner} -eq 4 ]; then
+		ping=ping
+		dst=${tunnel4_b_addr}
+	else
+		ping=${ping6}
+		dst=${tunnel6_b_addr}
+	fi
+
+	if [ ${outer} -eq 4 ]; then
+		#                      IPv4 header
+		exp_mtu=$((${ll_mtu} - 20))
+	else
+		#                      IPv6 header   Option 4
+		exp_mtu=$((${ll_mtu} - 40          - 8))
+	fi
+
+	# Create route exception by exceeding link layer MTU
+	mtu "${ns_a}"  veth_A-R1 $((${ll_mtu} + 1000))
+	mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
+	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+	mtu "${ns_a}" ip_a $((${ll_mtu} + 1000)) || return
+	mtu "${ns_b}" ip_b $((${ll_mtu} + 1000)) || return
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst}
+
+	# Check that exception was created
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
+	check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ip${inner}ip${outer} interface"
+}
+
+test_pmtu_ipv4_ipv4_exception() {
+	test_pmtu_ipvX_over_ipvY_exception 4 4
+}
+
+test_pmtu_ipv6_ipv4_exception() {
+	test_pmtu_ipvX_over_ipvY_exception 6 4
+}
+
+test_pmtu_ipv4_ipv6_exception() {
+	test_pmtu_ipvX_over_ipvY_exception 4 6
+}
+
+test_pmtu_ipv6_ipv6_exception() {
+	test_pmtu_ipvX_over_ipvY_exception 6 6
+}
+
 test_pmtu_vti4_exception() {
 	setup namespaces veth vti4 xfrm4 || return 2
 	trace "${ns_a}" veth_a    "${ns_b}" veth_b \
diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c
index 0ea44d975b6c..c5282e62df75 100644
--- a/tools/testing/selftests/net/tls.c
+++ b/tools/testing/selftests/net/tls.c
@@ -101,6 +101,21 @@ FIXTURE(tls)
 	bool notls;
 };
 
+FIXTURE_VARIANT(tls)
+{
+	unsigned int tls_version;
+};
+
+FIXTURE_VARIANT_ADD(tls, 12)
+{
+	.tls_version = TLS_1_2_VERSION,
+};
+
+FIXTURE_VARIANT_ADD(tls, 13)
+{
+	.tls_version = TLS_1_3_VERSION,
+};
+
 FIXTURE_SETUP(tls)
 {
 	struct tls12_crypto_info_aes_gcm_128 tls12;
@@ -112,7 +127,7 @@ FIXTURE_SETUP(tls)
 	len = sizeof(addr);
 
 	memset(&tls12, 0, sizeof(tls12));
-	tls12.info.version = TLS_1_3_VERSION;
+	tls12.info.version = variant->tls_version;
 	tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
 
 	addr.sin_family = AF_INET;
@@ -733,7 +748,7 @@ TEST_F(tls, bidir)
 		struct tls12_crypto_info_aes_gcm_128 tls12;
 
 		memset(&tls12, 0, sizeof(tls12));
-		tls12.info.version = TLS_1_3_VERSION;
+		tls12.info.version = variant->tls_version;
 		tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
 
 		ret = setsockopt(self->fd, SOL_TLS, TLS_RX, &tls12,
@@ -1258,78 +1273,4 @@ TEST(keysizes) {
 	close(cfd);
 }
 
-TEST(tls12) {
-	int fd, cfd;
-	bool notls;
-
-	struct tls12_crypto_info_aes_gcm_128 tls12;
-	struct sockaddr_in addr;
-	socklen_t len;
-	int sfd, ret;
-
-	notls = false;
-	len = sizeof(addr);
-
-	memset(&tls12, 0, sizeof(tls12));
-	tls12.info.version = TLS_1_2_VERSION;
-	tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
-
-	addr.sin_family = AF_INET;
-	addr.sin_addr.s_addr = htonl(INADDR_ANY);
-	addr.sin_port = 0;
-
-	fd = socket(AF_INET, SOCK_STREAM, 0);
-	sfd = socket(AF_INET, SOCK_STREAM, 0);
-
-	ret = bind(sfd, &addr, sizeof(addr));
-	ASSERT_EQ(ret, 0);
-	ret = listen(sfd, 10);
-	ASSERT_EQ(ret, 0);
-
-	ret = getsockname(sfd, &addr, &len);
-	ASSERT_EQ(ret, 0);
-
-	ret = connect(fd, &addr, sizeof(addr));
-	ASSERT_EQ(ret, 0);
-
-	ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
-	if (ret != 0) {
-		notls = true;
-		printf("Failure setting TCP_ULP, testing without tls\n");
-	}
-
-	if (!notls) {
-		ret = setsockopt(fd, SOL_TLS, TLS_TX, &tls12,
-				 sizeof(tls12));
-		ASSERT_EQ(ret, 0);
-	}
-
-	cfd = accept(sfd, &addr, &len);
-	ASSERT_GE(cfd, 0);
-
-	if (!notls) {
-		ret = setsockopt(cfd, IPPROTO_TCP, TCP_ULP, "tls",
-				 sizeof("tls"));
-		ASSERT_EQ(ret, 0);
-
-		ret = setsockopt(cfd, SOL_TLS, TLS_RX, &tls12,
-				 sizeof(tls12));
-		ASSERT_EQ(ret, 0);
-	}
-
-	close(sfd);
-
-	char const *test_str = "test_read";
-	int send_len = 10;
-	char buf[10];
-
-	send_len = strlen(test_str) + 1;
-	EXPECT_EQ(send(fd, test_str, send_len, 0), send_len);
-	EXPECT_NE(recv(cfd, buf, send_len, 0), -1);
-	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
-
-	close(fd);
-	close(cfd);
-}
-
 TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/net/vrf-xfrm-tests.sh b/tools/testing/selftests/net/vrf-xfrm-tests.sh
new file mode 100755
index 000000000000..184da81f554f
--- /dev/null
+++ b/tools/testing/selftests/net/vrf-xfrm-tests.sh
@@ -0,0 +1,436 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Various combinations of VRF with xfrms and qdisc.
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+PAUSE_ON_FAIL=no
+VERBOSE=0
+ret=0
+
+HOST1_4=192.168.1.1
+HOST2_4=192.168.1.2
+HOST1_6=2001:db8:1::1
+HOST2_6=2001:db8:1::2
+
+XFRM1_4=10.0.1.1
+XFRM2_4=10.0.1.2
+XFRM1_6=fc00:1000::1
+XFRM2_6=fc00:1000::2
+IF_ID=123
+
+VRF=red
+TABLE=300
+
+AUTH_1=0xd94fcfea65fddf21dc6e0d24a0253508
+AUTH_2=0xdc6e0d24a0253508d94fcfea65fddf21
+ENC_1=0xfc46c20f8048be9725930ff3fb07ac2a91f0347dffeacf62
+ENC_2=0x3fb07ac2a91f0347dffeacf62fc46c20f8048be9725930ff
+SPI_1=0x02122b77
+SPI_2=0x2b770212
+
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+################################################################################
+#
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+run_cmd_host1()
+{
+	local cmd="$*"
+	local out
+	local rc
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "    COMMAND: $cmd\n"
+	fi
+
+	out=$(eval ip netns exec host1 $cmd 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" ]; then
+		if [ -n "$out" ]; then
+			echo
+			echo "    $out"
+		fi
+		echo
+	fi
+
+	return $rc
+}
+
+################################################################################
+# create namespaces for hosts and sws
+
+create_vrf()
+{
+	local ns=$1
+	local vrf=$2
+	local table=$3
+
+	if [ -n "${ns}" ]; then
+		ns="-netns ${ns}"
+	fi
+
+	ip ${ns} link add ${vrf} type vrf table ${table}
+	ip ${ns} link set ${vrf} up
+	ip ${ns} route add vrf ${vrf} unreachable default metric 8192
+	ip ${ns} -6 route add vrf ${vrf} unreachable default metric 8192
+
+	ip ${ns} addr add 127.0.0.1/8 dev ${vrf}
+	ip ${ns} -6 addr add ::1 dev ${vrf} nodad
+
+	ip ${ns} ru del pref 0
+	ip ${ns} ru add pref 32765 from all lookup local
+	ip ${ns} -6 ru del pref 0
+	ip ${ns} -6 ru add pref 32765 from all lookup local
+}
+
+create_ns()
+{
+	local ns=$1
+	local addr=$2
+	local addr6=$3
+
+	[ -z "${addr}" ] && addr="-"
+	[ -z "${addr6}" ] && addr6="-"
+
+	ip netns add ${ns}
+
+	ip -netns ${ns} link set lo up
+	if [ "${addr}" != "-" ]; then
+		ip -netns ${ns} addr add dev lo ${addr}
+	fi
+	if [ "${addr6}" != "-" ]; then
+		ip -netns ${ns} -6 addr add dev lo ${addr6}
+	fi
+
+	ip -netns ${ns} ro add unreachable default metric 8192
+	ip -netns ${ns} -6 ro add unreachable default metric 8192
+
+	ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0
+}
+
+# create veth pair to connect namespaces and apply addresses.
+connect_ns()
+{
+	local ns1=$1
+	local ns1_dev=$2
+	local ns1_addr=$3
+	local ns1_addr6=$4
+	local ns2=$5
+	local ns2_dev=$6
+	local ns2_addr=$7
+	local ns2_addr6=$8
+	local ns1arg
+	local ns2arg
+
+	if [ -n "${ns1}" ]; then
+		ns1arg="-netns ${ns1}"
+	fi
+	if [ -n "${ns2}" ]; then
+		ns2arg="-netns ${ns2}"
+	fi
+
+	ip ${ns1arg} li add ${ns1_dev} type veth peer name tmp
+	ip ${ns1arg} li set ${ns1_dev} up
+	ip ${ns1arg} li set tmp netns ${ns2} name ${ns2_dev}
+	ip ${ns2arg} li set ${ns2_dev} up
+
+	if [ "${ns1_addr}" != "-" ]; then
+		ip ${ns1arg} addr add dev ${ns1_dev} ${ns1_addr}
+		ip ${ns2arg} addr add dev ${ns2_dev} ${ns2_addr}
+	fi
+
+	if [ "${ns1_addr6}" != "-" ]; then
+		ip ${ns1arg} addr add dev ${ns1_dev} ${ns1_addr6} nodad
+		ip ${ns2arg} addr add dev ${ns2_dev} ${ns2_addr6} nodad
+	fi
+}
+
+################################################################################
+
+cleanup()
+{
+	ip netns del host1
+	ip netns del host2
+}
+
+setup()
+{
+	create_ns "host1"
+	create_ns "host2"
+
+	connect_ns "host1" eth0 ${HOST1_4}/24 ${HOST1_6}/64 \
+	           "host2" eth0 ${HOST2_4}/24 ${HOST2_6}/64
+
+	create_vrf "host1" ${VRF} ${TABLE}
+	ip -netns host1 link set dev eth0 master ${VRF}
+}
+
+cleanup_xfrm()
+{
+	for ns in host1 host2
+	do
+		for x in state policy
+		do
+			ip -netns ${ns} xfrm ${x} flush
+			ip -6 -netns ${ns} xfrm ${x} flush
+		done
+	done
+}
+
+setup_xfrm()
+{
+	local h1_4=$1
+	local h2_4=$2
+	local h1_6=$3
+	local h2_6=$4
+	local devarg="$5"
+
+	#
+	# policy
+	#
+
+	# host1 - IPv4 out
+	ip -netns host1 xfrm policy add \
+	  src ${h1_4} dst ${h2_4} ${devarg} dir out \
+	  tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel
+
+	# host2 - IPv4 in
+	ip -netns host2 xfrm policy add \
+	  src ${h1_4} dst ${h2_4} dir in \
+	  tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel
+
+	# host1 - IPv4 in
+	ip -netns host1 xfrm policy add \
+	  src ${h2_4} dst ${h1_4} ${devarg} dir in \
+	  tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel
+
+	# host2 - IPv4 out
+	ip -netns host2 xfrm policy add \
+	  src ${h2_4} dst ${h1_4} dir out \
+	  tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel
+
+
+	# host1 - IPv6 out
+	ip -6 -netns host1 xfrm policy add \
+	  src ${h1_6} dst ${h2_6} ${devarg} dir out \
+	  tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel
+
+	# host2 - IPv6 in
+	ip -6 -netns host2 xfrm policy add \
+	  src ${h1_6} dst ${h2_6} dir in \
+	  tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel
+
+	# host1 - IPv6 in
+	ip -6 -netns host1 xfrm policy add \
+	  src ${h2_6} dst ${h1_6} ${devarg} dir in \
+	  tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel
+
+	# host2 - IPv6 out
+	ip -6 -netns host2 xfrm policy add \
+	  src ${h2_6} dst ${h1_6} dir out \
+	  tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel
+
+	#
+	# state
+	#
+	ip -netns host1 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
+	    proto esp spi ${SPI_1} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(md5)' ${AUTH_1} 96 \
+	    enc 'cbc(des3_ede)' ${ENC_1} \
+	    sel src ${h1_4} dst ${h2_4} ${devarg}
+
+	ip -netns host2 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
+	    proto esp spi ${SPI_1} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(md5)' ${AUTH_1} 96 \
+	    enc 'cbc(des3_ede)' ${ENC_1} \
+	    sel src ${h1_4} dst ${h2_4}
+
+
+	ip -netns host1 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
+	    proto esp spi ${SPI_2} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(md5)' ${AUTH_2} 96 \
+	    enc 'cbc(des3_ede)' ${ENC_2} \
+	    sel src ${h2_4} dst ${h1_4} ${devarg}
+
+	ip -netns host2 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
+	    proto esp spi ${SPI_2} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(md5)' ${AUTH_2} 96 \
+	    enc 'cbc(des3_ede)' ${ENC_2} \
+	    sel src ${h2_4} dst ${h1_4}
+
+
+	ip -6 -netns host1 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
+	    proto esp spi ${SPI_1} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(md5)' ${AUTH_1} 96 \
+	    enc 'cbc(des3_ede)' ${ENC_1} \
+	    sel src ${h1_6} dst ${h2_6} ${devarg}
+
+	ip -6 -netns host2 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
+	    proto esp spi ${SPI_1} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(md5)' ${AUTH_1} 96 \
+	    enc 'cbc(des3_ede)' ${ENC_1} \
+	    sel src ${h1_6} dst ${h2_6}
+
+
+	ip -6 -netns host1 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
+	    proto esp spi ${SPI_2} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(md5)' ${AUTH_2} 96 \
+	    enc 'cbc(des3_ede)' ${ENC_2} \
+	    sel src ${h2_6} dst ${h1_6} ${devarg}
+
+	ip -6 -netns host2 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
+	    proto esp spi ${SPI_2} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(md5)' ${AUTH_2} 96 \
+	    enc 'cbc(des3_ede)' ${ENC_2} \
+	    sel src ${h2_6} dst ${h1_6}
+}
+
+cleanup_xfrm_dev()
+{
+	ip -netns host1 li del xfrm0
+	ip -netns host2 addr del ${XFRM2_4}/24 dev eth0
+	ip -netns host2 addr del ${XFRM2_6}/64 dev eth0
+}
+
+setup_xfrm_dev()
+{
+	local vrfarg="vrf ${VRF}"
+
+	ip -netns host1 li add type xfrm dev eth0 if_id ${IF_ID}
+	ip -netns host1 li set xfrm0 ${vrfarg} up
+	ip -netns host1 addr add ${XFRM1_4}/24 dev xfrm0
+	ip -netns host1 addr add ${XFRM1_6}/64 dev xfrm0
+
+	ip -netns host2 addr add ${XFRM2_4}/24 dev eth0
+	ip -netns host2 addr add ${XFRM2_6}/64 dev eth0
+
+	setup_xfrm ${XFRM1_4} ${XFRM2_4} ${XFRM1_6} ${XFRM2_6} "if_id ${IF_ID}"
+}
+
+run_tests()
+{
+	cleanup_xfrm
+
+	# no IPsec
+	run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4}
+	log_test $? 0 "IPv4 no xfrm policy"
+	run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6}
+	log_test $? 0 "IPv6 no xfrm policy"
+
+	# xfrm without VRF in sel
+	setup_xfrm ${HOST1_4} ${HOST2_4} ${HOST1_6} ${HOST2_6}
+	run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4}
+	log_test $? 0 "IPv4 xfrm policy based on address"
+	run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6}
+	log_test $? 0 "IPv6 xfrm policy based on address"
+	cleanup_xfrm
+
+	# xfrm with VRF in sel
+	# Known failure: ipv4 resets the flow oif after the lookup. Fix is
+	# not straightforward.
+	# setup_xfrm ${HOST1_4} ${HOST2_4} ${HOST1_6} ${HOST2_6} "dev ${VRF}"
+	# run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4}
+	# log_test $? 0 "IPv4 xfrm policy with VRF in selector"
+	run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6}
+	log_test $? 0 "IPv6 xfrm policy with VRF in selector"
+	cleanup_xfrm
+
+	# xfrm with enslaved device in sel
+	# Known failures: combined with the above, __xfrm{4,6}_selector_match
+	# needs to consider both l3mdev and enslaved device index.
+	# setup_xfrm ${HOST1_4} ${HOST2_4} ${HOST1_6} ${HOST2_6} "dev eth0"
+	# run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4}
+	# log_test $? 0 "IPv4 xfrm policy with enslaved device in selector"
+	# run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6}
+	# log_test $? 0 "IPv6 xfrm policy with enslaved device in selector"
+	# cleanup_xfrm
+
+	# xfrm device
+	setup_xfrm_dev
+	run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${XFRM2_4}
+	log_test $? 0 "IPv4 xfrm policy with xfrm device"
+	run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${XFRM2_6}
+	log_test $? 0 "IPv6 xfrm policy with xfrm device"
+	cleanup_xfrm_dev
+}
+
+################################################################################
+# usage
+
+usage()
+{
+        cat <<EOF
+usage: ${0##*/} OPTS
+
+        -p          Pause on fail
+        -v          verbose mode (show commands and output)
+
+done
+EOF
+}
+
+################################################################################
+# main
+
+while getopts :pv o
+do
+	case $o in
+		p) PAUSE_ON_FAIL=yes;;
+		v) VERBOSE=$(($VERBOSE + 1));;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+cleanup 2>/dev/null
+setup
+
+echo
+echo "No qdisc on VRF device"
+run_tests
+
+run_cmd_host1 tc qdisc add dev ${VRF} root netem delay 100ms
+echo
+echo "netem qdisc on VRF device"
+run_tests
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n"   ${nfail}
+
+exit $ret
diff --git a/tools/testing/selftests/nsfs/pidns.c b/tools/testing/selftests/nsfs/pidns.c
index e0d86e1668c0..e3c772c6a7c7 100644
--- a/tools/testing/selftests/nsfs/pidns.c
+++ b/tools/testing/selftests/nsfs/pidns.c
@@ -27,7 +27,7 @@
 #define __stack_aligned__	__attribute__((aligned(16)))
 struct cr_clone_arg {
 	char stack[128] __stack_aligned__;
-	char stack_ptr[0];
+	char stack_ptr[];
 };
 
 static int child(void *args)
diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh
index 9c60337317c6..020137b61407 100755
--- a/tools/testing/selftests/ntb/ntb_test.sh
+++ b/tools/testing/selftests/ntb/ntb_test.sh
@@ -241,7 +241,7 @@ function get_files_count()
 	split_remote $LOC
 
 	if [[ "$REMOTE" == "" ]]; then
-		echo $(ls -1 "$LOC"/${NAME}* 2>/dev/null | wc -l)
+		echo $(ls -1 "$VPATH"/${NAME}* 2>/dev/null | wc -l)
 	else
 		echo $(ssh "$REMOTE" "ls -1 \"$VPATH\"/${NAME}* | \
 		       wc -l" 2> /dev/null)
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index 644770c3b754..0830e63818c1 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -19,6 +19,7 @@ SUB_DIRS = alignment		\
 	   copyloops		\
 	   dscr			\
 	   mm			\
+	   nx-gzip		\
 	   pmu			\
 	   signal		\
 	   primitives		\
diff --git a/tools/testing/selftests/powerpc/nx-gzip/99-nx-gzip.rules b/tools/testing/selftests/powerpc/nx-gzip/99-nx-gzip.rules
new file mode 100644
index 000000000000..5a7118495cb3
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/99-nx-gzip.rules
@@ -0,0 +1 @@
+SUBSYSTEM=="nxgzip", KERNEL=="nx-gzip", MODE="0666"
diff --git a/tools/testing/selftests/powerpc/nx-gzip/Makefile b/tools/testing/selftests/powerpc/nx-gzip/Makefile
new file mode 100644
index 000000000000..640fad6cc2c7
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/Makefile
@@ -0,0 +1,8 @@
+CFLAGS = -O3 -m64 -I./include
+
+TEST_GEN_FILES := gzfht_test gunz_test
+TEST_PROGS := nx-gzip-test.sh
+
+include ../../lib.mk
+
+$(TEST_GEN_FILES): gzip_vas.c
diff --git a/tools/testing/selftests/powerpc/nx-gzip/README b/tools/testing/selftests/powerpc/nx-gzip/README
new file mode 100644
index 000000000000..9809dbaa1905
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/README
@@ -0,0 +1,45 @@
+Test the nx-gzip function:
+=========================
+
+Verify that following device exists:
+  /dev/crypto/nx-gzip
+If you get a permission error run as sudo or set the device permissions:
+   sudo chmod go+rw /dev/crypto/nx-gzip
+However, chmod may not survive across boots. You may create a udev file such
+as:
+   /etc/udev/rules.d/99-nx-gzip.rules
+
+
+To manually build and run:
+$ gcc -O3 -I./include -o gzfht_test gzfht_test.c gzip_vas.c
+$ gcc -O3 -I./include -o gunz_test gunz_test.c gzip_vas.c
+
+
+Compress any file using Fixed Huffman mode. Output will have a .nx.gz suffix:
+$ ./gzfht_test gzip_vas.c
+file gzip_vas.c read, 6413 bytes
+compressed 6413 to 3124 bytes total, crc32 checksum = abd15e8a
+
+
+Uncompress the previous output. Output will have a .nx.gunzip suffix:
+./gunz_test gzip_vas.c.nx.gz
+gzHeader FLG 0
+00 00 00 00 04 03
+gzHeader MTIME, XFL, OS ignored
+computed checksum abd15e8a isize 0000190d
+stored   checksum abd15e8a isize 0000190d
+decomp is complete: fclose
+
+
+Compare two files:
+$ sha1sum gzip_vas.c.nx.gz.nx.gunzip gzip_vas.c
+bf43e3c0c3651f5f22b6f9784cd9b1eeab4120b6  gzip_vas.c.nx.gz.nx.gunzip
+bf43e3c0c3651f5f22b6f9784cd9b1eeab4120b6  gzip_vas.c
+
+
+Note that the code here are intended for testing the nx-gzip hardware function.
+They are not intended for demonstrating performance or compression ratio.
+By being simplistic these selftests expect to allocate the entire set of source
+and target pages in the memory so it needs enough memory to work.
+For more information and source code consider using:
+https://github.com/libnxz/power-gzip
diff --git a/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c b/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c
new file mode 100644
index 000000000000..6ee0fded0391
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c
@@ -0,0 +1,1028 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/* P9 gunzip sample code for demonstrating the P9 NX hardware
+ * interface.  Not intended for productive uses or for performance or
+ * compression ratio measurements.  Note also that /dev/crypto/gzip,
+ * VAS and skiboot support are required
+ *
+ * Copyright 2020 IBM Corp.
+ *
+ * Author: Bulent Abali <abali@us.ibm.com>
+ *
+ * https://github.com/libnxz/power-gzip for zlib api and other utils
+ * Definitions of acronyms used here.  See
+ * P9 NX Gzip Accelerator User's Manual for details:
+ * https://github.com/libnxz/power-gzip/blob/develop/doc/power_nx_gzip_um.pdf
+ *
+ * adler/crc: 32 bit checksums appended to stream tail
+ * ce:       completion extension
+ * cpb:      coprocessor parameter block (metadata)
+ * crb:      coprocessor request block (command)
+ * csb:      coprocessor status block (status)
+ * dht:      dynamic huffman table
+ * dde:      data descriptor element (address, length)
+ * ddl:      list of ddes
+ * dh/fh:    dynamic and fixed huffman types
+ * fc:       coprocessor function code
+ * histlen:  history/dictionary length
+ * history:  sliding window of up to 32KB of data
+ * lzcount:  Deflate LZ symbol counts
+ * rembytecnt: remaining byte count
+ * sfbt:     source final block type; last block's type during decomp
+ * spbc:     source processed byte count
+ * subc:     source unprocessed bit count
+ * tebc:     target ending bit count; valid bits in the last byte
+ * tpbc:     target processed byte count
+ * vas:      virtual accelerator switch; the user mode interface
+ */
+
+#define _ISOC11_SOURCE	// For aligned_alloc()
+#define _DEFAULT_SOURCE	// For endian.h
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/fcntl.h>
+#include <sys/mman.h>
+#include <endian.h>
+#include <bits/endian.h>
+#include <sys/ioctl.h>
+#include <assert.h>
+#include <errno.h>
+#include <signal.h>
+#include "nxu.h"
+#include "nx.h"
+#include "crb.h"
+
+int nx_dbg;
+FILE *nx_gzip_log;
+
+#define NX_MIN(X, Y) (((X) < (Y))?(X):(Y))
+#define NX_MAX(X, Y) (((X) > (Y))?(X):(Y))
+
+#define GETINPC(X) fgetc(X)
+#define FNAME_MAX 1024
+
+/* fifo queue management */
+#define fifo_used_bytes(used) (used)
+#define fifo_free_bytes(used, len) ((len)-(used))
+/* amount of free bytes in the first and last parts */
+#define fifo_free_first_bytes(cur, used, len)  ((((cur)+(used)) <= (len)) \
+						  ? (len)-((cur)+(used)) : 0)
+#define fifo_free_last_bytes(cur, used, len)   ((((cur)+(used)) <= (len)) \
+						  ? (cur) : (len)-(used))
+/* amount of used bytes in the first and last parts */
+#define fifo_used_first_bytes(cur, used, len)  ((((cur)+(used)) <= (len)) \
+						  ? (used) : (len)-(cur))
+#define fifo_used_last_bytes(cur, used, len)   ((((cur)+(used)) <= (len)) \
+						  ? 0 : ((used)+(cur))-(len))
+/* first and last free parts start here */
+#define fifo_free_first_offset(cur, used)      ((cur)+(used))
+#define fifo_free_last_offset(cur, used, len)  \
+					   fifo_used_last_bytes(cur, used, len)
+/* first and last used parts start here */
+#define fifo_used_first_offset(cur)            (cur)
+#define fifo_used_last_offset(cur)             (0)
+
+const int fifo_in_len = 1<<24;
+const int fifo_out_len = 1<<24;
+const int page_sz = 1<<16;
+const int line_sz = 1<<7;
+const int window_max = 1<<15;
+
+/*
+ * Adds an (address, len) pair to the list of ddes (ddl) and updates
+ * the base dde.  ddl[0] is the only dde in a direct dde which
+ * contains a single (addr,len) pair.  For more pairs, ddl[0] becomes
+ * the indirect (base) dde that points to a list of direct ddes.
+ * See Section 6.4 of the NX-gzip user manual for DDE description.
+ * Addr=NULL, len=0 clears the ddl[0].  Returns the total number of
+ * bytes in ddl.  Caller is responsible for allocting the array of
+ * nx_dde_t *ddl.  If N addresses are required in the scatter-gather
+ * list, the ddl array must have N+1 entries minimum.
+ */
+static inline uint32_t nx_append_dde(struct nx_dde_t *ddl, void *addr,
+					uint32_t len)
+{
+	uint32_t ddecnt;
+	uint32_t bytes;
+
+	if (addr == NULL && len == 0) {
+		clearp_dde(ddl);
+		return 0;
+	}
+
+	NXPRT(fprintf(stderr, "%d: %s addr %p len %x\n", __LINE__, addr,
+			__func__, len));
+
+	/* Number of ddes in the dde list ; == 0 when it is a direct dde */
+	ddecnt = getpnn(ddl, dde_count);
+	bytes = getp32(ddl, ddebc);
+
+	if (ddecnt == 0 && bytes == 0) {
+		/* First dde is unused; make it a direct dde */
+		bytes = len;
+		putp32(ddl, ddebc, bytes);
+		putp64(ddl, ddead, (uint64_t) addr);
+	} else if (ddecnt == 0) {
+		/* Converting direct to indirect dde
+		 * ddl[0] becomes head dde of ddl
+		 * copy direct to indirect first.
+		 */
+		ddl[1] = ddl[0];
+
+		/* Add the new dde next */
+		clear_dde(ddl[2]);
+		put32(ddl[2], ddebc, len);
+		put64(ddl[2], ddead, (uint64_t) addr);
+
+		/* Ddl head points to 2 direct ddes */
+		ddecnt = 2;
+		putpnn(ddl, dde_count, ddecnt);
+		bytes = bytes + len;
+		putp32(ddl, ddebc, bytes);
+		/* Pointer to the first direct dde */
+		putp64(ddl, ddead, (uint64_t) &ddl[1]);
+	} else {
+		/* Append a dde to an existing indirect ddl */
+		++ddecnt;
+		clear_dde(ddl[ddecnt]);
+		put64(ddl[ddecnt], ddead, (uint64_t) addr);
+		put32(ddl[ddecnt], ddebc, len);
+
+		putpnn(ddl, dde_count, ddecnt);
+		bytes = bytes + len;
+		putp32(ddl, ddebc, bytes); /* byte sum of all dde */
+	}
+	return bytes;
+}
+
+/*
+ * Touch specified number of pages represented in number bytes
+ * beginning from the first buffer in a dde list.
+ * Do not touch the pages past buf_sz-th byte's page.
+ *
+ * Set buf_sz = 0 to touch all pages described by the ddep.
+ */
+static int nx_touch_pages_dde(struct nx_dde_t *ddep, long buf_sz, long page_sz,
+				int wr)
+{
+	uint32_t indirect_count;
+	uint32_t buf_len;
+	long total;
+	uint64_t buf_addr;
+	struct nx_dde_t *dde_list;
+	int i;
+
+	assert(!!ddep);
+
+	indirect_count = getpnn(ddep, dde_count);
+
+	NXPRT(fprintf(stderr, "%s dde_count %d request len ", __func__,
+			indirect_count));
+	NXPRT(fprintf(stderr, "0x%lx\n", buf_sz));
+
+	if (indirect_count == 0) {
+		/* Direct dde */
+		buf_len = getp32(ddep, ddebc);
+		buf_addr = getp64(ddep, ddead);
+
+		NXPRT(fprintf(stderr, "touch direct ddebc 0x%x ddead %p\n",
+				buf_len, (void *)buf_addr));
+
+		if (buf_sz == 0)
+			nxu_touch_pages((void *)buf_addr, buf_len, page_sz, wr);
+		else
+			nxu_touch_pages((void *)buf_addr, NX_MIN(buf_len,
+					buf_sz), page_sz, wr);
+
+		return ERR_NX_OK;
+	}
+
+	/* Indirect dde */
+	if (indirect_count > MAX_DDE_COUNT)
+		return ERR_NX_EXCESSIVE_DDE;
+
+	/* First address of the list */
+	dde_list = (struct nx_dde_t *) getp64(ddep, ddead);
+
+	if (buf_sz == 0)
+		buf_sz = getp32(ddep, ddebc);
+
+	total = 0;
+	for (i = 0; i < indirect_count; i++) {
+		buf_len = get32(dde_list[i], ddebc);
+		buf_addr = get64(dde_list[i], ddead);
+		total += buf_len;
+
+		NXPRT(fprintf(stderr, "touch loop len 0x%x ddead %p total ",
+				buf_len, (void *)buf_addr));
+		NXPRT(fprintf(stderr, "0x%lx\n", total));
+
+		/* Touching fewer pages than encoded in the ddebc */
+		if (total > buf_sz) {
+			buf_len = NX_MIN(buf_len, total - buf_sz);
+			nxu_touch_pages((void *)buf_addr, buf_len, page_sz, wr);
+			NXPRT(fprintf(stderr, "touch loop break len 0x%x ",
+				      buf_len));
+			NXPRT(fprintf(stderr, "ddead %p\n", (void *)buf_addr));
+			break;
+		}
+		nxu_touch_pages((void *)buf_addr, buf_len, page_sz, wr);
+	}
+	return ERR_NX_OK;
+}
+
+/*
+ * Src and dst buffers are supplied in scatter gather lists.
+ * NX function code and other parameters supplied in cmdp.
+ */
+static int nx_submit_job(struct nx_dde_t *src, struct nx_dde_t *dst,
+			 struct nx_gzip_crb_cpb_t *cmdp, void *handle)
+{
+	uint64_t csbaddr;
+
+	memset((void *)&cmdp->crb.csb, 0, sizeof(cmdp->crb.csb));
+
+	cmdp->crb.source_dde = *src;
+	cmdp->crb.target_dde = *dst;
+
+	/* Status, output byte count in tpbc */
+	csbaddr = ((uint64_t) &cmdp->crb.csb) & csb_address_mask;
+	put64(cmdp->crb, csb_address, csbaddr);
+
+	/* NX reports input bytes in spbc; cleared */
+	cmdp->cpb.out_spbc_comp_wrap = 0;
+	cmdp->cpb.out_spbc_comp_with_count = 0;
+	cmdp->cpb.out_spbc_decomp = 0;
+
+	/* Clear output */
+	put32(cmdp->cpb, out_crc, INIT_CRC);
+	put32(cmdp->cpb, out_adler, INIT_ADLER);
+
+	/* Submit the crb, the job descriptor, to the accelerator. */
+	return nxu_submit_job(cmdp, handle);
+}
+
+int decompress_file(int argc, char **argv, void *devhandle)
+{
+	FILE *inpf = NULL;
+	FILE *outf = NULL;
+
+	int c, expect, i, cc, rc = 0;
+	char gzfname[FNAME_MAX];
+
+	/* Queuing, file ops, byte counting */
+	char *fifo_in, *fifo_out;
+	int used_in, cur_in, used_out, cur_out, read_sz, n;
+	int first_free, last_free, first_used, last_used;
+	int first_offset, last_offset;
+	int write_sz, free_space, source_sz;
+	int source_sz_estimate, target_sz_estimate;
+	uint64_t last_comp_ratio = 0; /* 1000 max */
+	uint64_t total_out = 0;
+	int is_final, is_eof;
+
+	/* nx hardware */
+	int sfbt, subc, spbc, tpbc, nx_ce, fc, resuming = 0;
+	int history_len = 0;
+	struct nx_gzip_crb_cpb_t cmd, *cmdp;
+	struct nx_dde_t *ddl_in;
+	struct nx_dde_t dde_in[6] __aligned(128);
+	struct nx_dde_t *ddl_out;
+	struct nx_dde_t dde_out[6] __aligned(128);
+	int pgfault_retries;
+
+	/* when using mmap'ed files */
+	off_t input_file_offset;
+
+	if (argc > 2) {
+		fprintf(stderr, "usage: %s <fname> or stdin\n", argv[0]);
+		fprintf(stderr, "    writes to stdout or <fname>.nx.gunzip\n");
+		return -1;
+	}
+
+	if (argc == 1) {
+		inpf = stdin;
+		outf = stdout;
+	} else if (argc == 2) {
+		char w[1024];
+		char *wp;
+
+		inpf = fopen(argv[1], "r");
+		if (inpf == NULL) {
+			perror(argv[1]);
+			return -1;
+		}
+
+		/* Make a new file name to write to.  Ignoring '.gz' */
+		wp = (NULL != (wp = strrchr(argv[1], '/'))) ? (wp+1) : argv[1];
+		strcpy(w, wp);
+		strcat(w, ".nx.gunzip");
+
+		outf = fopen(w, "w");
+		if (outf == NULL) {
+			perror(w);
+			return -1;
+		}
+	}
+
+	/* Decode the gzip header */
+	c = GETINPC(inpf); expect = 0x1f; /* ID1 */
+	if (c != expect)
+		goto err1;
+
+	c = GETINPC(inpf); expect = 0x8b; /* ID2 */
+	if (c != expect)
+		goto err1;
+
+	c = GETINPC(inpf); expect = 0x08; /* CM */
+	if (c != expect)
+		goto err1;
+
+	int flg = GETINPC(inpf); /* FLG */
+
+	if (flg & 0xE0 || flg & 0x4 || flg == EOF)
+		goto err2;
+
+	fprintf(stderr, "gzHeader FLG %x\n", flg);
+
+	/* Read 6 bytes; ignoring the MTIME, XFL, OS fields in this
+	 * sample code.
+	 */
+	for (i = 0; i < 6; i++) {
+		char tmp[10];
+
+		tmp[i] = GETINPC(inpf);
+		if (tmp[i] == EOF)
+			goto err3;
+		fprintf(stderr, "%02x ", tmp[i]);
+		if (i == 5)
+			fprintf(stderr, "\n");
+	}
+	fprintf(stderr, "gzHeader MTIME, XFL, OS ignored\n");
+
+	/* FNAME */
+	if (flg & 0x8) {
+		int k = 0;
+
+		do {
+			c = GETINPC(inpf);
+			if (c == EOF || k >= FNAME_MAX)
+				goto err3;
+			gzfname[k++] = c;
+		} while (c);
+		fprintf(stderr, "gzHeader FNAME: %s\n", gzfname);
+	}
+
+	/* FHCRC */
+	if (flg & 0x2) {
+		c = GETINPC(inpf);
+		if (c == EOF)
+			goto err3;
+		c = GETINPC(inpf);
+		if (c == EOF)
+			goto err3;
+		fprintf(stderr, "gzHeader FHCRC: ignored\n");
+	}
+
+	used_in = cur_in = used_out = cur_out = 0;
+	is_final = is_eof = 0;
+
+	/* Allocate one page larger to prevent page faults due to NX
+	 * overfetching.
+	 * Either do this (char*)(uintptr_t)aligned_alloc or use
+	 * -std=c11 flag to make the int-to-pointer warning go away.
+	 */
+	assert((fifo_in  = (char *)(uintptr_t)aligned_alloc(line_sz,
+				   fifo_in_len + page_sz)) != NULL);
+	assert((fifo_out = (char *)(uintptr_t)aligned_alloc(line_sz,
+				   fifo_out_len + page_sz + line_sz)) != NULL);
+	/* Leave unused space due to history rounding rules */
+	fifo_out = fifo_out + line_sz;
+	nxu_touch_pages(fifo_out, fifo_out_len, page_sz, 1);
+
+	ddl_in  = &dde_in[0];
+	ddl_out = &dde_out[0];
+	cmdp = &cmd;
+	memset(&cmdp->crb, 0, sizeof(cmdp->crb));
+
+read_state:
+
+	/* Read from .gz file */
+
+	NXPRT(fprintf(stderr, "read_state:\n"));
+
+	if (is_eof != 0)
+		goto write_state;
+
+	/* We read in to fifo_in in two steps: first: read in to from
+	 * cur_in to the end of the buffer.  last: if free space wrapped
+	 * around, read from fifo_in offset 0 to offset cur_in.
+	 */
+
+	/* Reset fifo head to reduce unnecessary wrap arounds */
+	cur_in = (used_in == 0) ? 0 : cur_in;
+
+	/* Free space total is reduced by a gap */
+	free_space = NX_MAX(0, fifo_free_bytes(used_in, fifo_in_len)
+			    - line_sz);
+
+	/* Free space may wrap around as first and last */
+	first_free = fifo_free_first_bytes(cur_in, used_in, fifo_in_len);
+	last_free  = fifo_free_last_bytes(cur_in, used_in, fifo_in_len);
+
+	/* Start offsets of the free memory */
+	first_offset = fifo_free_first_offset(cur_in, used_in);
+	last_offset  = fifo_free_last_offset(cur_in, used_in, fifo_in_len);
+
+	/* Reduce read_sz because of the line_sz gap */
+	read_sz = NX_MIN(free_space, first_free);
+	n = 0;
+	if (read_sz > 0) {
+		/* Read in to offset cur_in + used_in */
+		n = fread(fifo_in + first_offset, 1, read_sz, inpf);
+		used_in = used_in + n;
+		free_space = free_space - n;
+		assert(n <= read_sz);
+		if (n != read_sz) {
+			/* Either EOF or error; exit the read loop */
+			is_eof = 1;
+			goto write_state;
+		}
+	}
+
+	/* If free space wrapped around */
+	if (last_free > 0) {
+		/* Reduce read_sz because of the line_sz gap */
+		read_sz = NX_MIN(free_space, last_free);
+		n = 0;
+		if (read_sz > 0) {
+			n = fread(fifo_in + last_offset, 1, read_sz, inpf);
+			used_in = used_in + n;       /* Increase used space */
+			free_space = free_space - n; /* Decrease free space */
+			assert(n <= read_sz);
+			if (n != read_sz) {
+				/* Either EOF or error; exit the read loop */
+				is_eof = 1;
+				goto write_state;
+			}
+		}
+	}
+
+	/* At this point we have used_in bytes in fifo_in with the
+	 * data head starting at cur_in and possibly wrapping around.
+	 */
+
+write_state:
+
+	/* Write decompressed data to output file */
+
+	NXPRT(fprintf(stderr, "write_state:\n"));
+
+	if (used_out == 0)
+		goto decomp_state;
+
+	/* If fifo_out has data waiting, write it out to the file to
+	 * make free target space for the accelerator used bytes in
+	 * the first and last parts of fifo_out.
+	 */
+
+	first_used = fifo_used_first_bytes(cur_out, used_out, fifo_out_len);
+	last_used  = fifo_used_last_bytes(cur_out, used_out, fifo_out_len);
+
+	write_sz = first_used;
+
+	n = 0;
+	if (write_sz > 0) {
+		n = fwrite(fifo_out + cur_out, 1, write_sz, outf);
+		used_out = used_out - n;
+		/* Move head of the fifo */
+		cur_out = (cur_out + n) % fifo_out_len;
+		assert(n <= write_sz);
+		if (n != write_sz) {
+			fprintf(stderr, "error: write\n");
+			rc = -1;
+			goto err5;
+		}
+	}
+
+	if (last_used > 0) { /* If more data available in the last part */
+		write_sz = last_used; /* Keep it here for later */
+		n = 0;
+		if (write_sz > 0) {
+			n = fwrite(fifo_out, 1, write_sz, outf);
+			used_out = used_out - n;
+			cur_out = (cur_out + n) % fifo_out_len;
+			assert(n <= write_sz);
+			if (n != write_sz) {
+				fprintf(stderr, "error: write\n");
+				rc = -1;
+				goto err5;
+			}
+		}
+	}
+
+decomp_state:
+
+	/* NX decompresses input data */
+
+	NXPRT(fprintf(stderr, "decomp_state:\n"));
+
+	if (is_final)
+		goto finish_state;
+
+	/* Address/len lists */
+	clearp_dde(ddl_in);
+	clearp_dde(ddl_out);
+
+	/* FC, CRC, HistLen, Table 6-6 */
+	if (resuming) {
+		/* Resuming a partially decompressed input.
+		 * The key to resume is supplying the 32KB
+		 * dictionary (history) to NX, which is basically
+		 * the last 32KB of output produced.
+		 */
+		fc = GZIP_FC_DECOMPRESS_RESUME;
+
+		cmdp->cpb.in_crc   = cmdp->cpb.out_crc;
+		cmdp->cpb.in_adler = cmdp->cpb.out_adler;
+
+		/* Round up the history size to quadword.  Section 2.10 */
+		history_len = (history_len + 15) / 16;
+		putnn(cmdp->cpb, in_histlen, history_len);
+		history_len = history_len * 16; /* bytes */
+
+		if (history_len > 0) {
+			/* Chain in the history buffer to the DDE list */
+			if (cur_out >= history_len) {
+				nx_append_dde(ddl_in, fifo_out
+					      + (cur_out - history_len),
+					      history_len);
+			} else {
+				nx_append_dde(ddl_in, fifo_out
+					      + ((fifo_out_len + cur_out)
+					      - history_len),
+					      history_len - cur_out);
+				/* Up to 32KB history wraps around fifo_out */
+				nx_append_dde(ddl_in, fifo_out, cur_out);
+			}
+
+		}
+	} else {
+		/* First decompress job */
+		fc = GZIP_FC_DECOMPRESS;
+
+		history_len = 0;
+		/* Writing 0 clears out subc as well */
+		cmdp->cpb.in_histlen = 0;
+		total_out = 0;
+
+		put32(cmdp->cpb, in_crc, INIT_CRC);
+		put32(cmdp->cpb, in_adler, INIT_ADLER);
+		put32(cmdp->cpb, out_crc, INIT_CRC);
+		put32(cmdp->cpb, out_adler, INIT_ADLER);
+
+		/* Assuming 10% compression ratio initially; use the
+		 * most recently measured compression ratio as a
+		 * heuristic to estimate the input and output
+		 * sizes.  If we give too much input, the target buffer
+		 * overflows and NX cycles are wasted, and then we
+		 * must retry with smaller input size.  1000 is 100%.
+		 */
+		last_comp_ratio = 100UL;
+	}
+	cmdp->crb.gzip_fc = 0;
+	putnn(cmdp->crb, gzip_fc, fc);
+
+	/*
+	 * NX source buffers
+	 */
+	first_used = fifo_used_first_bytes(cur_in, used_in, fifo_in_len);
+	last_used = fifo_used_last_bytes(cur_in, used_in, fifo_in_len);
+
+	if (first_used > 0)
+		nx_append_dde(ddl_in, fifo_in + cur_in, first_used);
+
+	if (last_used > 0)
+		nx_append_dde(ddl_in, fifo_in, last_used);
+
+	/*
+	 * NX target buffers
+	 */
+	first_free = fifo_free_first_bytes(cur_out, used_out, fifo_out_len);
+	last_free = fifo_free_last_bytes(cur_out, used_out, fifo_out_len);
+
+	/* Reduce output free space amount not to overwrite the history */
+	int target_max = NX_MAX(0, fifo_free_bytes(used_out, fifo_out_len)
+				- (1<<16));
+
+	NXPRT(fprintf(stderr, "target_max %d (0x%x)\n", target_max,
+		      target_max));
+
+	first_free = NX_MIN(target_max, first_free);
+	if (first_free > 0) {
+		first_offset = fifo_free_first_offset(cur_out, used_out);
+		nx_append_dde(ddl_out, fifo_out + first_offset, first_free);
+	}
+
+	if (last_free > 0) {
+		last_free = NX_MIN(target_max - first_free, last_free);
+		if (last_free > 0) {
+			last_offset = fifo_free_last_offset(cur_out, used_out,
+							    fifo_out_len);
+			nx_append_dde(ddl_out, fifo_out + last_offset,
+				      last_free);
+		}
+	}
+
+	/* Target buffer size is used to limit the source data size
+	 * based on previous measurements of compression ratio.
+	 */
+
+	/* source_sz includes history */
+	source_sz = getp32(ddl_in, ddebc);
+	assert(source_sz > history_len);
+	source_sz = source_sz - history_len;
+
+	/* Estimating how much source is needed to 3/4 fill a
+	 * target_max size target buffer.  If we overshoot, then NX
+	 * must repeat the job with smaller input and we waste
+	 * bandwidth.  If we undershoot then we use more NX calls than
+	 * necessary.
+	 */
+
+	source_sz_estimate = ((uint64_t)target_max * last_comp_ratio * 3UL)
+				/ 4000;
+
+	if (source_sz_estimate < source_sz) {
+		/* Target might be small, therefore limiting the
+		 * source data.
+		 */
+		source_sz = source_sz_estimate;
+		target_sz_estimate = target_max;
+	} else {
+		/* Source file might be small, therefore limiting target
+		 * touch pages to a smaller value to save processor cycles.
+		 */
+		target_sz_estimate = ((uint64_t)source_sz * 1000UL)
+					/ (last_comp_ratio + 1);
+		target_sz_estimate = NX_MIN(2 * target_sz_estimate,
+					    target_max);
+	}
+
+	source_sz = source_sz + history_len;
+
+	/* Some NX condition codes require submitting the NX job again.
+	 * Kernel doesn't handle NX page faults. Expects user code to
+	 * touch pages.
+	 */
+	pgfault_retries = NX_MAX_FAULTS;
+
+restart_nx:
+
+	putp32(ddl_in, ddebc, source_sz);
+
+	/* Fault in pages */
+	nxu_touch_pages(cmdp, sizeof(struct nx_gzip_crb_cpb_t), page_sz, 1);
+	nx_touch_pages_dde(ddl_in, 0, page_sz, 0);
+	nx_touch_pages_dde(ddl_out, target_sz_estimate, page_sz, 1);
+
+	/* Send job to NX */
+	cc = nx_submit_job(ddl_in, ddl_out, cmdp, devhandle);
+
+	switch (cc) {
+
+	case ERR_NX_TRANSLATION:
+
+		/* We touched the pages ahead of time.  In the most common case
+		 * we shouldn't be here.  But may be some pages were paged out.
+		 * Kernel should have placed the faulting address to fsaddr.
+		 */
+		NXPRT(fprintf(stderr, "ERR_NX_TRANSLATION %p\n",
+			      (void *)cmdp->crb.csb.fsaddr));
+
+		if (pgfault_retries == NX_MAX_FAULTS) {
+			/* Try once with exact number of pages */
+			--pgfault_retries;
+			goto restart_nx;
+		} else if (pgfault_retries > 0) {
+			/* If still faulting try fewer input pages
+			 * assuming memory outage
+			 */
+			if (source_sz > page_sz)
+				source_sz = NX_MAX(source_sz / 2, page_sz);
+			--pgfault_retries;
+			goto restart_nx;
+		} else {
+			fprintf(stderr, "cannot make progress; too many ");
+			fprintf(stderr, "page fault retries cc= %d\n", cc);
+			rc = -1;
+			goto err5;
+		}
+
+	case ERR_NX_DATA_LENGTH:
+
+		NXPRT(fprintf(stderr, "ERR_NX_DATA_LENGTH; "));
+		NXPRT(fprintf(stderr, "stream may have trailing data\n"));
+
+		/* Not an error in the most common case; it just says
+		 * there is trailing data that we must examine.
+		 *
+		 * CC=3 CE(1)=0 CE(0)=1 indicates partial completion
+		 * Fig.6-7 and Table 6-8.
+		 */
+		nx_ce = get_csb_ce_ms3b(cmdp->crb.csb);
+
+		if (!csb_ce_termination(nx_ce) &&
+		    csb_ce_partial_completion(nx_ce)) {
+			/* Check CPB for more information
+			 * spbc and tpbc are valid
+			 */
+			sfbt = getnn(cmdp->cpb, out_sfbt); /* Table 6-4 */
+			subc = getnn(cmdp->cpb, out_subc); /* Table 6-4 */
+			spbc = get32(cmdp->cpb, out_spbc_decomp);
+			tpbc = get32(cmdp->crb.csb, tpbc);
+			assert(target_max >= tpbc);
+
+			goto ok_cc3; /* not an error */
+		} else {
+			/* History length error when CE(1)=1 CE(0)=0. */
+			rc = -1;
+			fprintf(stderr, "history length error cc= %d\n", cc);
+			goto err5;
+		}
+
+	case ERR_NX_TARGET_SPACE:
+
+		/* Target buffer not large enough; retry smaller input
+		 * data; give at least 1 byte.  SPBC/TPBC are not valid.
+		 */
+		assert(source_sz > history_len);
+		source_sz = ((source_sz - history_len + 2) / 2) + history_len;
+		NXPRT(fprintf(stderr, "ERR_NX_TARGET_SPACE; retry with "));
+		NXPRT(fprintf(stderr, "smaller input data src %d hist %d\n",
+			      source_sz, history_len));
+		goto restart_nx;
+
+	case ERR_NX_OK:
+
+		/* This should not happen for gzip formatted data;
+		 * we need trailing crc and isize
+		 */
+		fprintf(stderr, "ERR_NX_OK\n");
+		spbc = get32(cmdp->cpb, out_spbc_decomp);
+		tpbc = get32(cmdp->crb.csb, tpbc);
+		assert(target_max >= tpbc);
+		assert(spbc >= history_len);
+		source_sz = spbc - history_len;
+		goto offsets_state;
+
+	default:
+		fprintf(stderr, "error: cc= %d\n", cc);
+		rc = -1;
+		goto err5;
+	}
+
+ok_cc3:
+
+	NXPRT(fprintf(stderr, "cc3: sfbt: %x\n", sfbt));
+
+	assert(spbc > history_len);
+	source_sz = spbc - history_len;
+
+	/* Table 6-4: Source Final Block Type (SFBT) describes the
+	 * last processed deflate block and clues the software how to
+	 * resume the next job.  SUBC indicates how many input bits NX
+	 * consumed but did not process.  SPBC indicates how many
+	 * bytes of source were given to the accelerator including
+	 * history bytes.
+	 */
+
+	switch (sfbt) {
+		int dhtlen;
+
+	case 0x0: /* Deflate final EOB received */
+
+		/* Calculating the checksum start position. */
+
+		source_sz = source_sz - subc / 8;
+		is_final = 1;
+		break;
+
+		/* Resume decompression cases are below. Basically
+		 * indicates where NX has suspended and how to resume
+		 * the input stream.
+		 */
+
+	case 0x8: /* Within a literal block; use rembytecount */
+	case 0x9: /* Within a literal block; use rembytecount; bfinal=1 */
+
+		/* Supply the partially processed source byte again */
+		source_sz = source_sz - ((subc + 7) / 8);
+
+		/* SUBC LS 3bits: number of bits in the first source byte need
+		 * to be processed.
+		 * 000 means all 8 bits;  Table 6-3
+		 * Clear subc, histlen, sfbt, rembytecnt, dhtlen
+		 */
+		cmdp->cpb.in_subc = 0;
+		cmdp->cpb.in_sfbt = 0;
+		putnn(cmdp->cpb, in_subc, subc % 8);
+		putnn(cmdp->cpb, in_sfbt, sfbt);
+		putnn(cmdp->cpb, in_rembytecnt, getnn(cmdp->cpb,
+						      out_rembytecnt));
+		break;
+
+	case 0xA: /* Within a FH block; */
+	case 0xB: /* Within a FH block; bfinal=1 */
+
+		source_sz = source_sz - ((subc + 7) / 8);
+
+		/* Clear subc, histlen, sfbt, rembytecnt, dhtlen */
+		cmdp->cpb.in_subc = 0;
+		cmdp->cpb.in_sfbt = 0;
+		putnn(cmdp->cpb, in_subc, subc % 8);
+		putnn(cmdp->cpb, in_sfbt, sfbt);
+		break;
+
+	case 0xC: /* Within a DH block; */
+	case 0xD: /* Within a DH block; bfinal=1 */
+
+		source_sz = source_sz - ((subc + 7) / 8);
+
+		/* Clear subc, histlen, sfbt, rembytecnt, dhtlen */
+		cmdp->cpb.in_subc = 0;
+		cmdp->cpb.in_sfbt = 0;
+		putnn(cmdp->cpb, in_subc, subc % 8);
+		putnn(cmdp->cpb, in_sfbt, sfbt);
+
+		dhtlen = getnn(cmdp->cpb, out_dhtlen);
+		putnn(cmdp->cpb, in_dhtlen, dhtlen);
+		assert(dhtlen >= 42);
+
+		/* Round up to a qword */
+		dhtlen = (dhtlen + 127) / 128;
+
+		while (dhtlen > 0) { /* Copy dht from cpb.out to cpb.in */
+			--dhtlen;
+			cmdp->cpb.in_dht[dhtlen] = cmdp->cpb.out_dht[dhtlen];
+		}
+		break;
+
+	case 0xE: /* Within a block header; bfinal=0; */
+		     /* Also given if source data exactly ends (SUBC=0) with
+		      * EOB code with BFINAL=0.  Means the next byte will
+		      * contain a block header.
+		      */
+	case 0xF: /* within a block header with BFINAL=1. */
+
+		source_sz = source_sz - ((subc + 7) / 8);
+
+		/* Clear subc, histlen, sfbt, rembytecnt, dhtlen */
+		cmdp->cpb.in_subc = 0;
+		cmdp->cpb.in_sfbt = 0;
+		putnn(cmdp->cpb, in_subc, subc % 8);
+		putnn(cmdp->cpb, in_sfbt, sfbt);
+
+		/* Engine did not process any data */
+		if (is_eof && (source_sz == 0))
+			is_final = 1;
+	}
+
+offsets_state:
+
+	/* Adjust the source and target buffer offsets and lengths  */
+
+	NXPRT(fprintf(stderr, "offsets_state:\n"));
+
+	/* Delete input data from fifo_in */
+	used_in = used_in - source_sz;
+	cur_in = (cur_in + source_sz) % fifo_in_len;
+	input_file_offset = input_file_offset + source_sz;
+
+	/* Add output data to fifo_out */
+	used_out = used_out + tpbc;
+
+	assert(used_out <= fifo_out_len);
+
+	total_out = total_out + tpbc;
+
+	/* Deflate history is 32KB max.  No need to supply more
+	 * than 32KB on a resume.
+	 */
+	history_len = (total_out > window_max) ? window_max : total_out;
+
+	/* To estimate expected expansion in the next NX job; 500 means 50%.
+	 * Deflate best case is around 1 to 1000.
+	 */
+	last_comp_ratio = (1000UL * ((uint64_t)source_sz + 1))
+			  / ((uint64_t)tpbc + 1);
+	last_comp_ratio = NX_MAX(NX_MIN(1000UL, last_comp_ratio), 1);
+	NXPRT(fprintf(stderr, "comp_ratio %ld source_sz %d spbc %d tpbc %d\n",
+		      last_comp_ratio, source_sz, spbc, tpbc));
+
+	resuming = 1;
+
+finish_state:
+
+	NXPRT(fprintf(stderr, "finish_state:\n"));
+
+	if (is_final) {
+		if (used_out)
+			goto write_state; /* More data to write out */
+		else if (used_in < 8) {
+			/* Need at least 8 more bytes containing gzip crc
+			 * and isize.
+			 */
+			rc = -1;
+			goto err4;
+		} else {
+			/* Compare checksums and exit */
+			int i;
+			unsigned char tail[8];
+			uint32_t cksum, isize;
+
+			for (i = 0; i < 8; i++)
+				tail[i] = fifo_in[(cur_in + i) % fifo_in_len];
+			fprintf(stderr, "computed checksum %08x isize %08x\n",
+				cmdp->cpb.out_crc, (uint32_t) (total_out
+				% (1ULL<<32)));
+			cksum = ((uint32_t) tail[0] | (uint32_t) tail[1]<<8
+				 | (uint32_t) tail[2]<<16
+				 | (uint32_t) tail[3]<<24);
+			isize = ((uint32_t) tail[4] | (uint32_t) tail[5]<<8
+				 | (uint32_t) tail[6]<<16
+				 | (uint32_t) tail[7]<<24);
+			fprintf(stderr, "stored   checksum %08x isize %08x\n",
+				cksum, isize);
+
+			if (cksum == cmdp->cpb.out_crc && isize == (uint32_t)
+			    (total_out % (1ULL<<32))) {
+				rc = 0;	goto ok1;
+			} else {
+				rc = -1; goto err4;
+			}
+		}
+	} else
+		goto read_state;
+
+	return -1;
+
+err1:
+	fprintf(stderr, "error: not a gzip file, expect %x, read %x\n",
+		expect, c);
+	return -1;
+
+err2:
+	fprintf(stderr, "error: the FLG byte is wrong or not being handled\n");
+	return -1;
+
+err3:
+	fprintf(stderr, "error: gzip header\n");
+	return -1;
+
+err4:
+	fprintf(stderr, "error: checksum missing or mismatch\n");
+
+err5:
+ok1:
+	fprintf(stderr, "decomp is complete: fclose\n");
+	fclose(outf);
+
+	return rc;
+}
+
+
+int main(int argc, char **argv)
+{
+	int rc;
+	struct sigaction act;
+	void *handle;
+
+	nx_dbg = 0;
+	nx_gzip_log = NULL;
+	act.sa_handler = 0;
+	act.sa_sigaction = nxu_sigsegv_handler;
+	act.sa_flags = SA_SIGINFO;
+	act.sa_restorer = 0;
+	sigemptyset(&act.sa_mask);
+	sigaction(SIGSEGV, &act, NULL);
+
+	handle = nx_function_begin(NX_FUNC_COMP_GZIP, 0);
+	if (!handle) {
+		fprintf(stderr, "Unable to init NX, errno %d\n", errno);
+		exit(-1);
+	}
+
+	rc = decompress_file(argc, argv, handle);
+
+	nx_function_end(handle);
+
+	return rc;
+}
diff --git a/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c
new file mode 100644
index 000000000000..7496a83f9c9d
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/* P9 gzip sample code for demonstrating the P9 NX hardware interface.
+ * Not intended for productive uses or for performance or compression
+ * ratio measurements.  For simplicity of demonstration, this sample
+ * code compresses in to fixed Huffman blocks only (Deflate btype=1)
+ * and has very simple memory management.  Dynamic Huffman blocks
+ * (Deflate btype=2) are more involved as detailed in the user guide.
+ * Note also that /dev/crypto/gzip, VAS and skiboot support are
+ * required.
+ *
+ * Copyright 2020 IBM Corp.
+ *
+ * https://github.com/libnxz/power-gzip for zlib api and other utils
+ *
+ * Author: Bulent Abali <abali@us.ibm.com>
+ *
+ * Definitions of acronyms used here. See
+ * P9 NX Gzip Accelerator User's Manual for details:
+ * https://github.com/libnxz/power-gzip/blob/develop/doc/power_nx_gzip_um.pdf
+ *
+ * adler/crc: 32 bit checksums appended to stream tail
+ * ce:       completion extension
+ * cpb:      coprocessor parameter block (metadata)
+ * crb:      coprocessor request block (command)
+ * csb:      coprocessor status block (status)
+ * dht:      dynamic huffman table
+ * dde:      data descriptor element (address, length)
+ * ddl:      list of ddes
+ * dh/fh:    dynamic and fixed huffman types
+ * fc:       coprocessor function code
+ * histlen:  history/dictionary length
+ * history:  sliding window of up to 32KB of data
+ * lzcount:  Deflate LZ symbol counts
+ * rembytecnt: remaining byte count
+ * sfbt:     source final block type; last block's type during decomp
+ * spbc:     source processed byte count
+ * subc:     source unprocessed bit count
+ * tebc:     target ending bit count; valid bits in the last byte
+ * tpbc:     target processed byte count
+ * vas:      virtual accelerator switch; the user mode interface
+ */
+
+#define _ISOC11_SOURCE	// For aligned_alloc()
+#define _DEFAULT_SOURCE	// For endian.h
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/fcntl.h>
+#include <sys/mman.h>
+#include <endian.h>
+#include <bits/endian.h>
+#include <sys/ioctl.h>
+#include <assert.h>
+#include <errno.h>
+#include <signal.h>
+#include "nxu.h"
+#include "nx.h"
+
+int nx_dbg;
+FILE *nx_gzip_log;
+
+#define NX_MIN(X, Y) (((X) < (Y)) ? (X) : (Y))
+#define FNAME_MAX 1024
+#define FEXT ".nx.gz"
+
+/*
+ * LZ counts returned in the user supplied nx_gzip_crb_cpb_t structure.
+ */
+static int compress_fht_sample(char *src, uint32_t srclen, char *dst,
+				uint32_t dstlen, int with_count,
+				struct nx_gzip_crb_cpb_t *cmdp, void *handle)
+{
+	uint32_t fc;
+
+	assert(!!cmdp);
+
+	put32(cmdp->crb, gzip_fc, 0);  /* clear */
+	fc = (with_count) ? GZIP_FC_COMPRESS_RESUME_FHT_COUNT :
+			    GZIP_FC_COMPRESS_RESUME_FHT;
+	putnn(cmdp->crb, gzip_fc, fc);
+	putnn(cmdp->cpb, in_histlen, 0); /* resuming with no history */
+	memset((void *) &cmdp->crb.csb, 0, sizeof(cmdp->crb.csb));
+
+	/* Section 6.6 programming notes; spbc may be in two different
+	 * places depending on FC.
+	 */
+	if (!with_count)
+		put32(cmdp->cpb, out_spbc_comp, 0);
+	else
+		put32(cmdp->cpb, out_spbc_comp_with_count, 0);
+
+	/* Figure 6-3 6-4; CSB location */
+	put64(cmdp->crb, csb_address, 0);
+	put64(cmdp->crb, csb_address,
+	      (uint64_t) &cmdp->crb.csb & csb_address_mask);
+
+	/* Source direct dde (scatter-gather list) */
+	clear_dde(cmdp->crb.source_dde);
+	putnn(cmdp->crb.source_dde, dde_count, 0);
+	put32(cmdp->crb.source_dde, ddebc, srclen);
+	put64(cmdp->crb.source_dde, ddead, (uint64_t) src);
+
+	/* Target direct dde (scatter-gather list) */
+	clear_dde(cmdp->crb.target_dde);
+	putnn(cmdp->crb.target_dde, dde_count, 0);
+	put32(cmdp->crb.target_dde, ddebc, dstlen);
+	put64(cmdp->crb.target_dde, ddead, (uint64_t) dst);
+
+	/* Submit the crb, the job descriptor, to the accelerator */
+	return nxu_submit_job(cmdp, handle);
+}
+
+/*
+ * Prepares a blank no filename no timestamp gzip header and returns
+ * the number of bytes written to buf.
+ * Gzip specification at https://tools.ietf.org/html/rfc1952
+ */
+int gzip_header_blank(char *buf)
+{
+	int i = 0;
+
+	buf[i++] = 0x1f; /* ID1 */
+	buf[i++] = 0x8b; /* ID2 */
+	buf[i++] = 0x08; /* CM  */
+	buf[i++] = 0x00; /* FLG */
+	buf[i++] = 0x00; /* MTIME */
+	buf[i++] = 0x00; /* MTIME */
+	buf[i++] = 0x00; /* MTIME */
+	buf[i++] = 0x00; /* MTIME */
+	buf[i++] = 0x04; /* XFL 4=fastest */
+	buf[i++] = 0x03; /* OS UNIX */
+
+	return i;
+}
+
+/* Caller must free the allocated buffer return nonzero on error. */
+int read_alloc_input_file(char *fname, char **buf, size_t *bufsize)
+{
+	struct stat statbuf;
+	FILE *fp;
+	char *p;
+	size_t num_bytes;
+
+	if (stat(fname, &statbuf)) {
+		perror(fname);
+		return(-1);
+	}
+	fp = fopen(fname, "r");
+	if (fp == NULL) {
+		perror(fname);
+		return(-1);
+	}
+	assert(NULL != (p = (char *) malloc(statbuf.st_size)));
+	num_bytes = fread(p, 1, statbuf.st_size, fp);
+	if (ferror(fp) || (num_bytes != statbuf.st_size)) {
+		perror(fname);
+		return(-1);
+	}
+	*buf = p;
+	*bufsize = num_bytes;
+	return 0;
+}
+
+/* Returns nonzero on error */
+int write_output_file(char *fname, char *buf, size_t bufsize)
+{
+	FILE *fp;
+	size_t num_bytes;
+
+	fp = fopen(fname, "w");
+	if (fp == NULL) {
+		perror(fname);
+		return(-1);
+	}
+	num_bytes = fwrite(buf, 1, bufsize, fp);
+	if (ferror(fp) || (num_bytes != bufsize)) {
+		perror(fname);
+		return(-1);
+	}
+	fclose(fp);
+	return 0;
+}
+
+/*
+ * Z_SYNC_FLUSH as described in zlib.h.
+ * Returns number of appended bytes
+ */
+int append_sync_flush(char *buf, int tebc, int final)
+{
+	uint64_t flush;
+	int shift = (tebc & 0x7);
+
+	if (tebc > 0) {
+		/* Last byte is partially full */
+		buf = buf - 1;
+		*buf = *buf & (unsigned char) ((1<<tebc)-1);
+	} else
+		*buf = 0;
+	flush = ((0x1ULL & final) << shift) | *buf;
+	shift = shift + 3; /* BFINAL and BTYPE written */
+	shift = (shift <= 8) ? 8 : 16;
+	flush |= (0xFFFF0000ULL) << shift; /* Zero length block */
+	shift = shift + 32;
+	while (shift > 0) {
+		*buf++ = (unsigned char) (flush & 0xffULL);
+		flush = flush >> 8;
+		shift = shift - 8;
+	}
+	return(((tebc > 5) || (tebc == 0)) ? 5 : 4);
+}
+
+/*
+ * Final deflate block bit.  This call assumes the block
+ * beginning is byte aligned.
+ */
+static void set_bfinal(void *buf, int bfinal)
+{
+	char *b = buf;
+
+	if (bfinal)
+		*b = *b | (unsigned char) 0x01;
+	else
+		*b = *b & (unsigned char) 0xfe;
+}
+
+int compress_file(int argc, char **argv, void *handle)
+{
+	char *inbuf, *outbuf, *srcbuf, *dstbuf;
+	char outname[FNAME_MAX];
+	uint32_t srclen, dstlen;
+	uint32_t flushlen, chunk;
+	size_t inlen, outlen, dsttotlen, srctotlen;
+	uint32_t crc, spbc, tpbc, tebc;
+	int lzcounts = 0;
+	int cc;
+	int num_hdr_bytes;
+	struct nx_gzip_crb_cpb_t *cmdp;
+	uint32_t pagelen = 65536;
+	int fault_tries = NX_MAX_FAULTS;
+
+	cmdp = (void *)(uintptr_t)
+		aligned_alloc(sizeof(struct nx_gzip_crb_cpb_t),
+			      sizeof(struct nx_gzip_crb_cpb_t));
+
+	if (argc != 2) {
+		fprintf(stderr, "usage: %s <fname>\n", argv[0]);
+		exit(-1);
+	}
+	if (read_alloc_input_file(argv[1], &inbuf, &inlen))
+		exit(-1);
+	fprintf(stderr, "file %s read, %ld bytes\n", argv[1], inlen);
+
+	/* Generous output buffer for header/trailer */
+	outlen = 2 * inlen + 1024;
+
+	assert(NULL != (outbuf = (char *)malloc(outlen)));
+	nxu_touch_pages(outbuf, outlen, pagelen, 1);
+
+	/* Compress piecemeal in smallish chunks */
+	chunk = 1<<22;
+
+	/* Write the gzip header to the stream */
+	num_hdr_bytes = gzip_header_blank(outbuf);
+	dstbuf    = outbuf + num_hdr_bytes;
+	outlen    = outlen - num_hdr_bytes;
+	dsttotlen = num_hdr_bytes;
+
+	srcbuf    = inbuf;
+	srctotlen = 0;
+
+	/* Init the CRB, the coprocessor request block */
+	memset(&cmdp->crb, 0, sizeof(cmdp->crb));
+
+	/* Initial gzip crc32 */
+	put32(cmdp->cpb, in_crc, 0);
+
+	while (inlen > 0) {
+
+		/* Submit chunk size source data per job */
+		srclen = NX_MIN(chunk, inlen);
+		/* Supply large target in case data expands */
+		dstlen = NX_MIN(2*srclen, outlen);
+
+		/* Page faults are handled by the user code */
+
+		/* Fault-in pages; an improved code wouldn't touch so
+		 * many pages but would try to estimate the
+		 * compression ratio and adjust both the src and dst
+		 * touch amounts.
+		 */
+		nxu_touch_pages(cmdp, sizeof(struct nx_gzip_crb_cpb_t), pagelen,
+				1);
+		nxu_touch_pages(srcbuf, srclen, pagelen, 0);
+		nxu_touch_pages(dstbuf, dstlen, pagelen, 1);
+
+		cc = compress_fht_sample(
+			srcbuf, srclen,
+			dstbuf, dstlen,
+			lzcounts, cmdp, handle);
+
+		if (cc != ERR_NX_OK && cc != ERR_NX_TPBC_GT_SPBC &&
+		    cc != ERR_NX_TRANSLATION) {
+			fprintf(stderr, "nx error: cc= %d\n", cc);
+			exit(-1);
+		}
+
+		/* Page faults are handled by the user code */
+		if (cc == ERR_NX_TRANSLATION) {
+			NXPRT(fprintf(stderr, "page fault: cc= %d, ", cc));
+			NXPRT(fprintf(stderr, "try= %d, fsa= %08llx\n",
+				  fault_tries,
+				  (unsigned long long) cmdp->crb.csb.fsaddr));
+			fault_tries--;
+			if (fault_tries > 0) {
+				continue;
+			} else {
+				fprintf(stderr, "error: cannot progress; ");
+				fprintf(stderr, "too many faults\n");
+				exit(-1);
+			};
+		}
+
+		fault_tries = NX_MAX_FAULTS; /* Reset for the next chunk */
+
+		inlen     = inlen - srclen;
+		srcbuf    = srcbuf + srclen;
+		srctotlen = srctotlen + srclen;
+
+		/* Two possible locations for spbc depending on the function
+		 * code.
+		 */
+		spbc = (!lzcounts) ? get32(cmdp->cpb, out_spbc_comp) :
+			get32(cmdp->cpb, out_spbc_comp_with_count);
+		assert(spbc == srclen);
+
+		/* Target byte count */
+		tpbc = get32(cmdp->crb.csb, tpbc);
+		/* Target ending bit count */
+		tebc = getnn(cmdp->cpb, out_tebc);
+		NXPRT(fprintf(stderr, "compressed chunk %d ", spbc));
+		NXPRT(fprintf(stderr, "to %d bytes, tebc= %d\n", tpbc, tebc));
+
+		if (inlen > 0) { /* More chunks to go */
+			set_bfinal(dstbuf, 0);
+			dstbuf    = dstbuf + tpbc;
+			dsttotlen = dsttotlen + tpbc;
+			outlen    = outlen - tpbc;
+			/* Round up to the next byte with a flush
+			 * block; do not set the BFINAqL bit.
+			 */
+			flushlen  = append_sync_flush(dstbuf, tebc, 0);
+			dsttotlen = dsttotlen + flushlen;
+			outlen    = outlen - flushlen;
+			dstbuf    = dstbuf + flushlen;
+			NXPRT(fprintf(stderr, "added sync_flush %d bytes\n",
+					flushlen));
+		} else {  /* Done */
+			/* Set the BFINAL bit of the last block per Deflate
+			 * specification.
+			 */
+			set_bfinal(dstbuf, 1);
+			dstbuf    = dstbuf + tpbc;
+			dsttotlen = dsttotlen + tpbc;
+			outlen    = outlen - tpbc;
+		}
+
+		/* Resuming crc32 for the next chunk */
+		crc = get32(cmdp->cpb, out_crc);
+		put32(cmdp->cpb, in_crc, crc);
+		crc = be32toh(crc);
+	}
+
+	/* Append crc32 and ISIZE to the end */
+	memcpy(dstbuf, &crc, 4);
+	memcpy(dstbuf+4, &srctotlen, 4);
+	dsttotlen = dsttotlen + 8;
+	outlen    = outlen - 8;
+
+	assert(FNAME_MAX > (strlen(argv[1]) + strlen(FEXT)));
+	strcpy(outname, argv[1]);
+	strcat(outname, FEXT);
+	if (write_output_file(outname, outbuf, dsttotlen)) {
+		fprintf(stderr, "write error: %s\n", outname);
+		exit(-1);
+	}
+
+	fprintf(stderr, "compressed %ld to %ld bytes total, ", srctotlen,
+		dsttotlen);
+	fprintf(stderr, "crc32 checksum = %08x\n", crc);
+
+	if (inbuf != NULL)
+		free(inbuf);
+
+	if (outbuf != NULL)
+		free(outbuf);
+
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	int rc;
+	struct sigaction act;
+	void *handle;
+
+	nx_dbg = 0;
+	nx_gzip_log = NULL;
+	act.sa_handler = 0;
+	act.sa_sigaction = nxu_sigsegv_handler;
+	act.sa_flags = SA_SIGINFO;
+	act.sa_restorer = 0;
+	sigemptyset(&act.sa_mask);
+	sigaction(SIGSEGV, &act, NULL);
+
+	handle = nx_function_begin(NX_FUNC_COMP_GZIP, 0);
+	if (!handle) {
+		fprintf(stderr, "Unable to init NX, errno %d\n", errno);
+		exit(-1);
+	}
+
+	rc = compress_file(argc, argv, handle);
+
+	nx_function_end(handle);
+
+	return rc;
+}
diff --git a/tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c b/tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c
new file mode 100644
index 000000000000..c055885da40a
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * Copyright 2020 IBM Corp.
+ *
+ * Author: Bulent Abali <abali@us.ibm.com>
+ *
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/fcntl.h>
+#include <sys/mman.h>
+#include <endian.h>
+#include <bits/endian.h>
+#include <sys/ioctl.h>
+#include <assert.h>
+#include <errno.h>
+#include <signal.h>
+#include "vas-api.h"
+#include "nx.h"
+#include "copy-paste.h"
+#include "nxu.h"
+#include "nx_dbg.h"
+#include <sys/platform/ppc.h>
+
+#define barrier()
+#define hwsync()    ({ asm volatile("sync" ::: "memory"); })
+
+#ifndef NX_NO_CPU_PRI
+#define cpu_pri_default()  ({ asm volatile ("or 2, 2, 2"); })
+#define cpu_pri_low()      ({ asm volatile ("or 31, 31, 31"); })
+#else
+#define cpu_pri_default()
+#define cpu_pri_low()
+#endif
+
+void *nx_fault_storage_address;
+
+struct nx_handle {
+	int fd;
+	int function;
+	void *paste_addr;
+};
+
+static int open_device_nodes(char *devname, int pri, struct nx_handle *handle)
+{
+	int rc, fd;
+	void *addr;
+	struct vas_tx_win_open_attr txattr;
+
+	fd = open(devname, O_RDWR);
+	if (fd < 0) {
+		fprintf(stderr, " open device name %s\n", devname);
+		return -errno;
+	}
+
+	memset(&txattr, 0, sizeof(txattr));
+	txattr.version = 1;
+	txattr.vas_id = pri;
+	rc = ioctl(fd, VAS_TX_WIN_OPEN, (unsigned long)&txattr);
+	if (rc < 0) {
+		fprintf(stderr, "ioctl() n %d, error %d\n", rc, errno);
+		rc = -errno;
+		goto out;
+	}
+
+	addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0ULL);
+	if (addr == MAP_FAILED) {
+		fprintf(stderr, "mmap() failed, errno %d\n", errno);
+		rc = -errno;
+		goto out;
+	}
+	handle->fd = fd;
+	handle->paste_addr = (void *)((char *)addr + 0x400);
+
+	rc = 0;
+out:
+	close(fd);
+	return rc;
+}
+
+void *nx_function_begin(int function, int pri)
+{
+	int rc;
+	char *devname = "/dev/crypto/nx-gzip";
+	struct nx_handle *nxhandle;
+
+	if (function != NX_FUNC_COMP_GZIP) {
+		errno = EINVAL;
+		fprintf(stderr, " NX_FUNC_COMP_GZIP not found\n");
+		return NULL;
+	}
+
+
+	nxhandle = malloc(sizeof(*nxhandle));
+	if (!nxhandle) {
+		errno = ENOMEM;
+		fprintf(stderr, " No memory\n");
+		return NULL;
+	}
+
+	nxhandle->function = function;
+	rc = open_device_nodes(devname, pri, nxhandle);
+	if (rc < 0) {
+		errno = -rc;
+		fprintf(stderr, " open_device_nodes failed\n");
+		return NULL;
+	}
+
+	return nxhandle;
+}
+
+int nx_function_end(void *handle)
+{
+	int rc = 0;
+	struct nx_handle *nxhandle = handle;
+
+	rc = munmap(nxhandle->paste_addr - 0x400, 4096);
+	if (rc < 0) {
+		fprintf(stderr, "munmap() failed, errno %d\n", errno);
+		return rc;
+	}
+	close(nxhandle->fd);
+	free(nxhandle);
+
+	return rc;
+}
+
+static int nx_wait_for_csb(struct nx_gzip_crb_cpb_t *cmdp)
+{
+	long poll = 0;
+	uint64_t t;
+
+	/* Save power and let other threads use the h/w. top may show
+	 * 100% but only because OS doesn't know we slowed the this
+	 * h/w thread while polling. We're letting other threads have
+	 * higher throughput on the core.
+	 */
+	cpu_pri_low();
+
+#define CSB_MAX_POLL 200000000UL
+#define USLEEP_TH     300000UL
+
+	t = __ppc_get_timebase();
+
+	while (getnn(cmdp->crb.csb, csb_v) == 0) {
+		++poll;
+		hwsync();
+
+		cpu_pri_low();
+
+		/* usleep(0) takes around 29000 ticks ~60 us.
+		 * 300000 is spinning for about 600 us then
+		 * start sleeping.
+		 */
+		if ((__ppc_get_timebase() - t) > USLEEP_TH) {
+			cpu_pri_default();
+			usleep(1);
+		}
+
+		if (poll > CSB_MAX_POLL)
+			break;
+
+		/* Fault address from signal handler */
+		if (nx_fault_storage_address) {
+			cpu_pri_default();
+			return -EAGAIN;
+		}
+
+	}
+
+	cpu_pri_default();
+
+	/* hw has updated csb and output buffer */
+	hwsync();
+
+	/* Check CSB flags. */
+	if (getnn(cmdp->crb.csb, csb_v) == 0) {
+		fprintf(stderr, "CSB still not valid after %d polls.\n",
+			(int) poll);
+		prt_err("CSB still not valid after %d polls, giving up.\n",
+			(int) poll);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int nxu_run_job(struct nx_gzip_crb_cpb_t *cmdp, void *handle)
+{
+	int i, ret, retries;
+	struct nx_handle *nxhandle = handle;
+
+	assert(handle != NULL);
+	i = 0;
+	retries = 5000;
+	while (i++ < retries) {
+		hwsync();
+		vas_copy(&cmdp->crb, 0);
+		ret = vas_paste(nxhandle->paste_addr, 0);
+		hwsync();
+
+		NXPRT(fprintf(stderr, "Paste attempt %d/%d returns 0x%x\n",
+				i, retries, ret));
+
+		if ((ret == 2) || (ret == 3)) {
+
+			ret = nx_wait_for_csb(cmdp);
+			if (!ret) {
+				goto out;
+			} else if (ret == -EAGAIN) {
+				long x;
+
+				prt_err("Touching address %p, 0x%lx\n",
+					 nx_fault_storage_address,
+					 *(long *) nx_fault_storage_address);
+				x = *(long *) nx_fault_storage_address;
+				*(long *) nx_fault_storage_address = x;
+				nx_fault_storage_address = 0;
+				continue;
+			} else {
+				prt_err("wait_for_csb() returns %d\n", ret);
+				break;
+			}
+		} else {
+			if (i < 10) {
+				/* spin for few ticks */
+#define SPIN_TH 500UL
+				uint64_t fail_spin;
+
+				fail_spin = __ppc_get_timebase();
+				while ((__ppc_get_timebase() - fail_spin) <
+					 SPIN_TH)
+					;
+			} else {
+				/* sleep */
+				unsigned int pr = 0;
+
+				if (pr++ % 100 == 0) {
+					prt_err("Paste attempt %d/", i);
+					prt_err("%d, failed pid= %d\n", retries,
+						getpid());
+				}
+				usleep(1);
+			}
+			continue;
+		}
+	}
+
+out:
+	cpu_pri_default();
+
+	return ret;
+}
+
+int nxu_submit_job(struct nx_gzip_crb_cpb_t *cmdp, void *handle)
+{
+	int cc;
+
+	cc = nxu_run_job(cmdp, handle);
+
+	if (!cc)
+		cc = getnn(cmdp->crb.csb, csb_cc);      /* CC Table 6-8 */
+
+	return cc;
+}
+
+
+void nxu_sigsegv_handler(int sig, siginfo_t *info, void *ctx)
+{
+	fprintf(stderr, "%d: Got signal %d si_code %d, si_addr %p\n", getpid(),
+		sig, info->si_code, info->si_addr);
+
+	nx_fault_storage_address = info->si_addr;
+}
+
+/*
+ * Fault in pages prior to NX job submission.  wr=1 may be required to
+ * touch writeable pages.  System zero pages do not fault-in the page as
+ * intended.  Typically set wr=1 for NX target pages and set wr=0 for NX
+ * source pages.
+ */
+int nxu_touch_pages(void *buf, long buf_len, long page_len, int wr)
+{
+	char *begin = buf;
+	char *end = (char *) buf + buf_len - 1;
+	volatile char t;
+
+	assert(buf_len >= 0 && !!buf);
+
+	NXPRT(fprintf(stderr, "touch %p %p len 0x%lx wr=%d\n", buf,
+			(buf + buf_len), buf_len, wr));
+
+	if (buf_len <= 0 || buf == NULL)
+		return -1;
+
+	do {
+		t = *begin;
+		if (wr)
+			*begin = t;
+		begin = begin + page_len;
+	} while (begin < end);
+
+	/* When buf_sz is small or buf tail is in another page */
+	t = *end;
+	if (wr)
+		*end = t;
+
+	return 0;
+}
diff --git a/tools/testing/selftests/powerpc/nx-gzip/include/copy-paste.h b/tools/testing/selftests/powerpc/nx-gzip/include/copy-paste.h
new file mode 100644
index 000000000000..0db2d6485037
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/include/copy-paste.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/* From asm-compat.h */
+#define __stringify_in_c(...)	#__VA_ARGS__
+#define stringify_in_c(...)	__stringify_in_c(__VA_ARGS__) " "
+
+/*
+ * Macros taken from arch/powerpc/include/asm/ppc-opcode.h and other
+ * header files.
+ */
+#define ___PPC_RA(a)    (((a) & 0x1f) << 16)
+#define ___PPC_RB(b)    (((b) & 0x1f) << 11)
+
+#define PPC_INST_COPY                   0x7c20060c
+#define PPC_INST_PASTE                  0x7c20070d
+
+#define PPC_COPY(a, b)          stringify_in_c(.long PPC_INST_COPY | \
+						___PPC_RA(a) | ___PPC_RB(b))
+#define PPC_PASTE(a, b)         stringify_in_c(.long PPC_INST_PASTE | \
+						___PPC_RA(a) | ___PPC_RB(b))
+#define CR0_SHIFT	28
+#define CR0_MASK	0xF
+/*
+ * Copy/paste instructions:
+ *
+ *	copy RA,RB
+ *		Copy contents of address (RA) + effective_address(RB)
+ *		to internal copy-buffer.
+ *
+ *	paste RA,RB
+ *		Paste contents of internal copy-buffer to the address
+ *		(RA) + effective_address(RB)
+ */
+static inline int vas_copy(void *crb, int offset)
+{
+	asm volatile(PPC_COPY(%0, %1)";"
+		:
+		: "b" (offset), "b" (crb)
+		: "memory");
+
+	return 0;
+}
+
+static inline int vas_paste(void *paste_address, int offset)
+{
+	__u32 cr;
+
+	cr = 0;
+	asm volatile(PPC_PASTE(%1, %2)";"
+		"mfocrf %0, 0x80;"
+		: "=r" (cr)
+		: "b" (offset), "b" (paste_address)
+		: "memory", "cr0");
+
+	return (cr >> CR0_SHIFT) & CR0_MASK;
+}
diff --git a/tools/testing/selftests/powerpc/nx-gzip/include/crb.h b/tools/testing/selftests/powerpc/nx-gzip/include/crb.h
new file mode 100644
index 000000000000..ab101085fa7e
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/include/crb.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __CRB_H
+#define __CRB_H
+#include <linux/types.h>
+#include "nx.h"
+
+/* CCW 842 CI/FC masks
+ * NX P8 workbook, section 4.3.1, figure 4-6
+ * "CI/FC Boundary by NX CT type"
+ */
+#define CCW_CI_842              (0x00003ff8)
+#define CCW_FC_842              (0x00000007)
+
+/* Chapter 6.5.8 Coprocessor-Completion Block (CCB) */
+
+#define CCB_VALUE		(0x3fffffffffffffff)
+#define CCB_ADDRESS		(0xfffffffffffffff8)
+#define CCB_CM			(0x0000000000000007)
+#define CCB_CM0			(0x0000000000000004)
+#define CCB_CM12		(0x0000000000000003)
+
+#define CCB_CM0_ALL_COMPLETIONS	(0x0)
+#define CCB_CM0_LAST_IN_CHAIN	(0x4)
+#define CCB_CM12_STORE		(0x0)
+#define CCB_CM12_INTERRUPT	(0x1)
+
+#define CCB_SIZE		(0x10)
+#define CCB_ALIGN		CCB_SIZE
+
+struct coprocessor_completion_block {
+	__be64 value;
+	__be64 address;
+} __aligned(CCB_ALIGN);
+
+
+/* Chapter 6.5.7 Coprocessor-Status Block (CSB) */
+
+#define CSB_V			(0x80)
+#define CSB_F			(0x04)
+#define CSB_CH			(0x03)
+#define CSB_CE_INCOMPLETE	(0x80)
+#define CSB_CE_TERMINATION	(0x40)
+#define CSB_CE_TPBC		(0x20)
+
+#define CSB_CC_SUCCESS		(0)
+#define CSB_CC_INVALID_ALIGN	(1)
+#define CSB_CC_OPERAND_OVERLAP	(2)
+#define CSB_CC_DATA_LENGTH	(3)
+#define CSB_CC_TRANSLATION	(5)
+#define CSB_CC_PROTECTION	(6)
+#define CSB_CC_RD_EXTERNAL	(7)
+#define CSB_CC_INVALID_OPERAND	(8)
+#define CSB_CC_PRIVILEGE	(9)
+#define CSB_CC_INTERNAL		(10)
+#define CSB_CC_WR_EXTERNAL	(12)
+#define CSB_CC_NOSPC		(13)
+#define CSB_CC_EXCESSIVE_DDE	(14)
+#define CSB_CC_WR_TRANSLATION	(15)
+#define CSB_CC_WR_PROTECTION	(16)
+#define CSB_CC_UNKNOWN_CODE	(17)
+#define CSB_CC_ABORT		(18)
+#define CSB_CC_TRANSPORT	(20)
+#define CSB_CC_SEGMENTED_DDL	(31)
+#define CSB_CC_PROGRESS_POINT	(32)
+#define CSB_CC_DDE_OVERFLOW	(33)
+#define CSB_CC_SESSION		(34)
+#define CSB_CC_PROVISION	(36)
+#define CSB_CC_CHAIN		(37)
+#define CSB_CC_SEQUENCE		(38)
+#define CSB_CC_HW		(39)
+
+#define CSB_SIZE		(0x10)
+#define CSB_ALIGN		CSB_SIZE
+
+struct coprocessor_status_block {
+	__u8 flags;
+	__u8 cs;
+	__u8 cc;
+	__u8 ce;
+	__be32 count;
+	__be64 address;
+} __aligned(CSB_ALIGN);
+
+
+/* Chapter 6.5.10 Data-Descriptor List (DDL)
+ * each list contains one or more Data-Descriptor Entries (DDE)
+ */
+
+#define DDE_P			(0x8000)
+
+#define DDE_SIZE		(0x10)
+#define DDE_ALIGN		DDE_SIZE
+
+struct data_descriptor_entry {
+	__be16 flags;
+	__u8 count;
+	__u8 index;
+	__be32 length;
+	__be64 address;
+} __aligned(DDE_ALIGN);
+
+
+/* Chapter 6.5.2 Coprocessor-Request Block (CRB) */
+
+#define CRB_SIZE		(0x80)
+#define CRB_ALIGN		(0x100) /* Errata: requires 256 alignment */
+
+
+/* Coprocessor Status Block field
+ *   ADDRESS	address of CSB
+ *   C		CCB is valid
+ *   AT		0 = addrs are virtual, 1 = addrs are phys
+ *   M		enable perf monitor
+ */
+#define CRB_CSB_ADDRESS		(0xfffffffffffffff0)
+#define CRB_CSB_C		(0x0000000000000008)
+#define CRB_CSB_AT		(0x0000000000000002)
+#define CRB_CSB_M		(0x0000000000000001)
+
+struct coprocessor_request_block {
+	__be32 ccw;
+	__be32 flags;
+	__be64 csb_addr;
+
+	struct data_descriptor_entry source;
+	struct data_descriptor_entry target;
+
+	struct coprocessor_completion_block ccb;
+
+	__u8 reserved[48];
+
+	struct coprocessor_status_block csb;
+} __aligned(CRB_ALIGN);
+
+#define crb_csb_addr(c)         __be64_to_cpu(c->csb_addr)
+#define crb_nx_fault_addr(c)    __be64_to_cpu(c->stamp.nx.fault_storage_addr)
+#define crb_nx_flags(c)         c->stamp.nx.flags
+#define crb_nx_fault_status(c)  c->stamp.nx.fault_status
+#define crb_nx_pswid(c)		c->stamp.nx.pswid
+
+
+/* RFC02167 Initiate Coprocessor Instructions document
+ * Chapter 8.2.1.1.1 RS
+ * Chapter 8.2.3 Coprocessor Directive
+ * Chapter 8.2.4 Execution
+ *
+ * The CCW must be converted to BE before passing to icswx()
+ */
+
+#define CCW_PS                  (0xff000000)
+#define CCW_CT                  (0x00ff0000)
+#define CCW_CD                  (0x0000ffff)
+#define CCW_CL                  (0x0000c000)
+
+#endif
diff --git a/tools/testing/selftests/powerpc/nx-gzip/include/nx.h b/tools/testing/selftests/powerpc/nx-gzip/include/nx.h
new file mode 100644
index 000000000000..1abe23fc29e8
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/include/nx.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2020 IBM Corp.
+ *
+ */
+#ifndef _NX_H
+#define _NX_H
+
+#include <stdbool.h>
+
+#define	NX_FUNC_COMP_842	1
+#define NX_FUNC_COMP_GZIP	2
+
+#ifndef __aligned
+#define __aligned(x)	__attribute__((aligned(x)))
+#endif
+
+struct nx842_func_args {
+	bool use_crc;
+	bool decompress;		/* true decompress; false compress */
+	bool move_data;
+	int timeout;			/* seconds */
+};
+
+struct nxbuf_t {
+	int len;
+	char *buf;
+};
+
+/* @function should be EFT (aka 842), GZIP etc */
+void *nx_function_begin(int function, int pri);
+
+int nx_function(void *handle, struct nxbuf_t *in, struct nxbuf_t *out,
+		void *arg);
+
+int nx_function_end(void *handle);
+
+#endif	/* _NX_H */
diff --git a/tools/testing/selftests/powerpc/nx-gzip/include/nx_dbg.h b/tools/testing/selftests/powerpc/nx-gzip/include/nx_dbg.h
new file mode 100644
index 000000000000..16464e19c47f
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/include/nx_dbg.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2020 IBM Corporation
+ *
+ */
+
+#ifndef _NXU_DBG_H_
+#define _NXU_DBG_H_
+
+#include <sys/file.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <time.h>
+#include <pthread.h>
+
+extern FILE * nx_gzip_log;
+extern int nx_gzip_trace;
+extern unsigned int nx_gzip_inflate_impl;
+extern unsigned int nx_gzip_deflate_impl;
+extern unsigned int nx_gzip_inflate_flags;
+extern unsigned int nx_gzip_deflate_flags;
+
+extern int nx_dbg;
+pthread_mutex_t mutex_log;
+
+#define nx_gzip_trace_enabled()       (nx_gzip_trace & 0x1)
+#define nx_gzip_hw_trace_enabled()    (nx_gzip_trace & 0x2)
+#define nx_gzip_sw_trace_enabled()    (nx_gzip_trace & 0x4)
+#define nx_gzip_gather_statistics()   (nx_gzip_trace & 0x8)
+#define nx_gzip_per_stream_stat()     (nx_gzip_trace & 0x10)
+
+#define prt(fmt, ...) do { \
+	pthread_mutex_lock(&mutex_log);					\
+	flock(nx_gzip_log->_fileno, LOCK_EX);				\
+	time_t t; struct tm *m; time(&t); m = localtime(&t);		\
+	fprintf(nx_gzip_log, "[%04d/%02d/%02d %02d:%02d:%02d] "		\
+		"pid %d: " fmt,	\
+		(int)m->tm_year + 1900, (int)m->tm_mon+1, (int)m->tm_mday, \
+		(int)m->tm_hour, (int)m->tm_min, (int)m->tm_sec,	\
+		(int)getpid(), ## __VA_ARGS__);				\
+	fflush(nx_gzip_log);						\
+	flock(nx_gzip_log->_fileno, LOCK_UN);				\
+	pthread_mutex_unlock(&mutex_log);				\
+} while (0)
+
+/* Use in case of an error */
+#define prt_err(fmt, ...) do { if (nx_dbg >= 0) {			\
+	prt("%s:%u: Error: "fmt,					\
+		__FILE__, __LINE__, ## __VA_ARGS__);			\
+}} while (0)
+
+/* Use in case of an warning */
+#define prt_warn(fmt, ...) do {	if (nx_dbg >= 1) {			\
+	prt("%s:%u: Warning: "fmt,					\
+		__FILE__, __LINE__, ## __VA_ARGS__);			\
+}} while (0)
+
+/* Informational printouts */
+#define prt_info(fmt, ...) do {	if (nx_dbg >= 2) {			\
+	prt("Info: "fmt, ## __VA_ARGS__);				\
+}} while (0)
+
+/* Trace zlib wrapper code */
+#define prt_trace(fmt, ...) do { if (nx_gzip_trace_enabled()) {		\
+	prt("### "fmt, ## __VA_ARGS__);					\
+}} while (0)
+
+/* Trace statistics */
+#define prt_stat(fmt, ...) do {	if (nx_gzip_gather_statistics()) {	\
+	prt("### "fmt, ## __VA_ARGS__);					\
+}} while (0)
+
+/* Trace zlib hardware implementation */
+#define hw_trace(fmt, ...) do {						\
+		if (nx_gzip_hw_trace_enabled())				\
+			fprintf(nx_gzip_log, "hhh " fmt, ## __VA_ARGS__); \
+	} while (0)
+
+/* Trace zlib software implementation */
+#define sw_trace(fmt, ...) do {						\
+		if (nx_gzip_sw_trace_enabled())				\
+			fprintf(nx_gzip_log, "sss " fmt, ## __VA_ARGS__); \
+	} while (0)
+
+
+/**
+ * str_to_num - Convert string into number and copy with endings like
+ *              KiB for kilobyte
+ *              MiB for megabyte
+ *              GiB for gigabyte
+ */
+uint64_t str_to_num(char *str);
+void nx_lib_debug(int onoff);
+
+#endif	/* _NXU_DBG_H_ */
diff --git a/tools/testing/selftests/powerpc/nx-gzip/include/nxu.h b/tools/testing/selftests/powerpc/nx-gzip/include/nxu.h
new file mode 100644
index 000000000000..20a4e883e0d3
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/include/nxu.h
@@ -0,0 +1,650 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Hardware interface of the NX-GZIP compression accelerator
+ *
+ * Copyright (C) IBM Corporation, 2020
+ *
+ * Author: Bulent Abali <abali@us.ibm.com>
+ *
+ */
+
+#ifndef _NXU_H
+#define _NXU_H
+
+#include <stdint.h>
+#include <endian.h>
+#include "nx.h"
+
+/* deflate */
+#define LLSZ   286
+#define DSZ    30
+
+/* nx */
+#define DHTSZ  18
+#define DHT_MAXSZ 288
+#define MAX_DDE_COUNT 256
+
+/* util */
+#ifdef NXDBG
+#define NXPRT(X)	X
+#else
+#define NXPRT(X)
+#endif
+
+#ifdef NXTIMER
+#include <sys/platform/ppc.h>
+#define NX_CLK(X)	X
+#define nx_get_time()	__ppc_get_timebase()
+#define nx_get_freq()	__ppc_get_timebase_freq()
+#else
+#define NX_CLK(X)
+#define nx_get_time()  (-1)
+#define nx_get_freq()  (-1)
+#endif
+
+#define NX_MAX_FAULTS  500
+
+/*
+ * Definitions of acronyms used here. See
+ * P9 NX Gzip Accelerator User's Manual for details:
+ * https://github.com/libnxz/power-gzip/blob/develop/doc/power_nx_gzip_um.pdf
+ *
+ * adler/crc: 32 bit checksums appended to stream tail
+ * ce:       completion extension
+ * cpb:      coprocessor parameter block (metadata)
+ * crb:      coprocessor request block (command)
+ * csb:      coprocessor status block (status)
+ * dht:      dynamic huffman table
+ * dde:      data descriptor element (address, length)
+ * ddl:      list of ddes
+ * dh/fh:    dynamic and fixed huffman types
+ * fc:       coprocessor function code
+ * histlen:  history/dictionary length
+ * history:  sliding window of up to 32KB of data
+ * lzcount:  Deflate LZ symbol counts
+ * rembytecnt: remaining byte count
+ * sfbt:     source final block type; last block's type during decomp
+ * spbc:     source processed byte count
+ * subc:     source unprocessed bit count
+ * tebc:     target ending bit count; valid bits in the last byte
+ * tpbc:     target processed byte count
+ * vas:      virtual accelerator switch; the user mode interface
+ */
+
+union nx_qw_t {
+	uint32_t word[4];
+	uint64_t dword[2];
+} __aligned(16);
+
+/*
+ * Note: NX registers with fewer than 32 bits are declared by
+ * convention as uint32_t variables in unions. If *_offset and *_mask
+ * are defined for a variable, then use get_ put_ macros to
+ * conveniently access the register fields for endian conversions.
+ */
+
+struct nx_dde_t {
+	/* Data Descriptor Element, Section 6.4 */
+	union {
+		uint32_t dde_count;
+		/* When dde_count == 0 ddead is a pointer to a data buffer;
+		 * ddebc is the buffer length bytes.
+		 * When dde_count > 0 dde is an indirect dde; ddead is a
+		 * pointer to a contiguous list of direct ddes; ddebc is the
+		 * total length of all data pointed to by the list of direct
+		 * ddes. Note that only one level of indirection is permitted.
+		 * See Section 6.4 of the user manual for additional details.
+		 */
+	};
+	uint32_t ddebc; /* dde byte count */
+	uint64_t ddead; /* dde address */
+} __aligned(16);
+
+struct nx_csb_t {
+	/* Coprocessor Status Block, Section 6.6  */
+	union {
+		uint32_t csb_v;
+		/* Valid bit. v must be set to 0 by the program
+		 * before submitting the coprocessor command.
+		 * Software can poll for the v bit
+		 */
+
+		uint32_t csb_f;
+		/* 16B CSB size. Written to 0 by DMA when it writes the CPB */
+
+		uint32_t csb_cs;
+		/* cs completion sequence; unused */
+
+		uint32_t csb_cc;
+		/* cc completion code; cc != 0 exception occurred */
+
+		uint32_t csb_ce;
+		/* ce completion extension */
+
+	};
+	uint32_t tpbc;
+	/* target processed byte count TPBC */
+
+	uint64_t fsaddr;
+	/* Section 6.12.1 CSB NonZero error summary.  FSA Failing storage
+	 * address.  Address where error occurred. When available, written
+	 * to A field of CSB
+	 */
+} __aligned(16);
+
+struct nx_ccb_t {
+	/* Coprocessor Completion Block, Section 6.7 */
+
+	uint32_t reserved[3];
+	union {
+		/* When crb.c==0 (no ccb defined) it is reserved;
+		 * When crb.c==1 (ccb defined) it is cm
+		 */
+
+		uint32_t ccb_cm;
+		/* Signal interrupt of crb.c==1 and cm==1 */
+
+		uint32_t word;
+		/* generic access to the 32bit word */
+	};
+} __aligned(16);
+
+struct vas_stamped_crb_t {
+	/*
+	 * CRB operand of the paste coprocessor instruction is stamped
+	 * in quadword 4 with the information shown here as its written
+	 * in to the receive FIFO of the coprocessor
+	 */
+
+	union {
+		uint32_t vas_buf_num;
+		/* Verification only vas buffer number which correlates to
+		 * the low order bits of the atag in the paste command
+		 */
+
+		uint32_t send_wc_id;
+		/* Pointer to Send Window Context that provides for NX address
+		 * translation information, such as MSR and LPCR bits, job
+		 * completion interrupt RA, PSWID, and job utilization counter.
+		 */
+
+	};
+	union {
+		uint32_t recv_wc_id;
+		/* Pointer to Receive Window Context. NX uses this to return
+		 * credits to a Receive FIFO as entries are dequeued.
+		 */
+
+	};
+	uint32_t reserved2;
+	union {
+		uint32_t vas_invalid;
+		/* Invalid bit. If this bit is 1 the CRB is discarded by
+		 * NX upon fetching from the receive FIFO. If this bit is 0
+		 * the CRB is processed normally. The bit is stamped to 0
+		 * by VAS and may be written to 1 by hypervisor while
+		 * the CRB is in the receive FIFO (in memory).
+		 */
+
+	};
+};
+
+struct nx_stamped_fault_crb_t {
+	/*
+	 * A CRB that has a translation fault is stamped by NX in quadword 4
+	 * and pasted to the Fault Send Window in VAS.
+	 */
+	uint64_t fsa;
+	union {
+		uint32_t nxsf_t;
+		uint32_t nxsf_fs;
+	};
+	uint32_t pswid;
+};
+
+union stamped_crb_t {
+	struct vas_stamped_crb_t      vas;
+	struct nx_stamped_fault_crb_t nx;
+};
+
+struct nx_gzip_cpb_t {
+	/*
+	 * Coprocessor Parameter Block In/Out are used to pass metadata
+	 * to/from accelerator.  Tables 6.5 and 6.6 of the user manual.
+	 */
+
+	/* CPBInput */
+
+	struct {
+		union {
+		union nx_qw_t qw0;
+			struct {
+				uint32_t in_adler;            /* bits 0:31  */
+				uint32_t in_crc;              /* bits 32:63 */
+				union {
+					uint32_t in_histlen;  /* bits 64:75 */
+					uint32_t in_subc;     /* bits 93:95 */
+				};
+				union {
+					/* bits 108:111 */
+					uint32_t in_sfbt;
+					/* bits 112:127 */
+					uint32_t in_rembytecnt;
+					/* bits 116:127 */
+					uint32_t in_dhtlen;
+				};
+			};
+		};
+		union {
+			union nx_qw_t  in_dht[DHTSZ];	/* qw[1:18]     */
+			char in_dht_char[DHT_MAXSZ];	/* byte access  */
+		};
+		union nx_qw_t  reserved[5];		/* qw[19:23]    */
+	};
+
+	/* CPBOutput */
+
+	volatile struct {
+		union {
+			union nx_qw_t qw24;
+			struct {
+				uint32_t out_adler;    /* bits 0:31  qw[24] */
+				uint32_t out_crc;      /* bits 32:63 qw[24] */
+				union {
+					/* bits 77:79 qw[24] */
+					uint32_t out_tebc;
+					/* bits 80:95 qw[24] */
+					uint32_t out_subc;
+				};
+				union {
+					/* bits 108:111 qw[24] */
+					uint32_t out_sfbt;
+					/* bits 112:127 qw[24] */
+					uint32_t out_rembytecnt;
+					/* bits 116:127 qw[24] */
+					uint32_t out_dhtlen;
+				};
+			};
+		};
+		union {
+			union nx_qw_t  qw25[79];        /* qw[25:103] */
+			/* qw[25] compress no lzcounts or wrap */
+			uint32_t out_spbc_comp_wrap;
+			uint32_t out_spbc_wrap;         /* qw[25] wrap */
+			/* qw[25] compress no lzcounts */
+			uint32_t out_spbc_comp;
+			 /* 286 LL and 30 D symbol counts */
+			uint32_t out_lzcount[LLSZ+DSZ];
+			struct {
+				union nx_qw_t  out_dht[DHTSZ];  /* qw[25:42] */
+				/* qw[43] decompress */
+				uint32_t out_spbc_decomp;
+			};
+		};
+		/* qw[104] compress with lzcounts */
+		uint32_t out_spbc_comp_with_count;
+	};
+} __aligned(128);
+
+struct nx_gzip_crb_t {
+	union {                   /* byte[0:3]   */
+		uint32_t gzip_fc;     /* bits[24-31] */
+	};
+	uint32_t reserved1;       /* byte[4:7]   */
+	union {
+		uint64_t csb_address; /* byte[8:15]  */
+		struct {
+			uint32_t reserved2;
+			union {
+				uint32_t crb_c;
+				/* c==0 no ccb defined */
+
+				uint32_t crb_at;
+				/* at==0 address type is ignored;
+				 * all addrs effective assumed.
+				 */
+
+			};
+		};
+	};
+	struct nx_dde_t source_dde;           /* byte[16:31] */
+	struct nx_dde_t target_dde;           /* byte[32:47] */
+	volatile struct nx_ccb_t ccb;         /* byte[48:63] */
+	volatile union {
+		/* byte[64:239] shift csb by 128 bytes out of the crb; csb was
+		 * in crb earlier; JReilly says csb written with partial inject
+		 */
+		union nx_qw_t reserved64[11];
+		union stamped_crb_t stamp;       /* byte[64:79] */
+	};
+	volatile struct nx_csb_t csb;
+} __aligned(128);
+
+struct nx_gzip_crb_cpb_t {
+	struct nx_gzip_crb_t crb;
+	struct nx_gzip_cpb_t cpb;
+} __aligned(2048);
+
+
+/*
+ * NX hardware convention has the msb bit on the left numbered 0.
+ * The defines below has *_offset defined as the right most bit
+ * position of a field.  x of size_mask(x) is the field width in bits.
+ */
+
+#define size_mask(x)          ((1U<<(x))-1)
+
+/*
+ * Offsets and Widths within the containing 32 bits of the various NX
+ * gzip hardware registers.  Use the getnn/putnn macros to access
+ * these regs
+ */
+
+#define dde_count_mask        size_mask(8)
+#define dde_count_offset      23
+
+/* CSB */
+
+#define csb_v_mask            size_mask(1)
+#define csb_v_offset          0
+#define csb_f_mask            size_mask(1)
+#define csb_f_offset          6
+#define csb_cs_mask           size_mask(8)
+#define csb_cs_offset         15
+#define csb_cc_mask           size_mask(8)
+#define csb_cc_offset         23
+#define csb_ce_mask           size_mask(8)
+#define csb_ce_offset         31
+
+/* CCB */
+
+#define ccb_cm_mask           size_mask(3)
+#define ccb_cm_offset         31
+
+/* VAS stamped CRB fields */
+
+#define vas_buf_num_mask      size_mask(6)
+#define vas_buf_num_offset    5
+#define send_wc_id_mask       size_mask(16)
+#define send_wc_id_offset     31
+#define recv_wc_id_mask       size_mask(16)
+#define recv_wc_id_offset     31
+#define vas_invalid_mask      size_mask(1)
+#define vas_invalid_offset    31
+
+/* NX stamped fault CRB fields */
+
+#define nxsf_t_mask           size_mask(1)
+#define nxsf_t_offset         23
+#define nxsf_fs_mask          size_mask(8)
+#define nxsf_fs_offset        31
+
+/* CPB input */
+
+#define in_histlen_mask       size_mask(12)
+#define in_histlen_offset     11
+#define in_dhtlen_mask        size_mask(12)
+#define in_dhtlen_offset      31
+#define in_subc_mask          size_mask(3)
+#define in_subc_offset        31
+#define in_sfbt_mask          size_mask(4)
+#define in_sfbt_offset        15
+#define in_rembytecnt_mask    size_mask(16)
+#define in_rembytecnt_offset  31
+
+/* CPB output */
+
+#define out_tebc_mask         size_mask(3)
+#define out_tebc_offset       15
+#define out_subc_mask         size_mask(16)
+#define out_subc_offset       31
+#define out_sfbt_mask         size_mask(4)
+#define out_sfbt_offset       15
+#define out_rembytecnt_mask   size_mask(16)
+#define out_rembytecnt_offset 31
+#define out_dhtlen_mask       size_mask(12)
+#define out_dhtlen_offset     31
+
+/* CRB */
+
+#define gzip_fc_mask          size_mask(8)
+#define gzip_fc_offset        31
+#define crb_c_mask            size_mask(1)
+#define crb_c_offset          28
+#define crb_at_mask           size_mask(1)
+#define crb_at_offset         30
+#define csb_address_mask      ~(15UL) /* mask off bottom 4b */
+
+/*
+ * Access macros for the registers.  Do not access registers directly
+ * because of the endian conversion.  P9 processor may run either as
+ * Little or Big endian. However the NX coprocessor regs are always
+ * big endian.
+ * Use the 32 and 64b macros to access respective
+ * register sizes.
+ * Use nn forms for the register fields shorter than 32 bits.
+ */
+
+#define getnn(ST, REG)      ((be32toh(ST.REG) >> (31-REG##_offset)) \
+				 & REG##_mask)
+#define getpnn(ST, REG)     ((be32toh((ST)->REG) >> (31-REG##_offset)) \
+				 & REG##_mask)
+#define get32(ST, REG)      (be32toh(ST.REG))
+#define getp32(ST, REG)     (be32toh((ST)->REG))
+#define get64(ST, REG)      (be64toh(ST.REG))
+#define getp64(ST, REG)     (be64toh((ST)->REG))
+
+#define unget32(ST, REG)    (get32(ST, REG) & ~((REG##_mask) \
+				<< (31-REG##_offset)))
+/* get 32bits less the REG field */
+
+#define ungetp32(ST, REG)   (getp32(ST, REG) & ~((REG##_mask) \
+				<< (31-REG##_offset)))
+/* get 32bits less the REG field */
+
+#define clear_regs(ST)      memset((void *)(&(ST)), 0, sizeof(ST))
+#define clear_dde(ST)       do { ST.dde_count = ST.ddebc = 0; ST.ddead = 0; \
+				} while (0)
+#define clearp_dde(ST)      do { (ST)->dde_count = (ST)->ddebc = 0; \
+				 (ST)->ddead = 0; \
+				} while (0)
+#define clear_struct(ST)    memset((void *)(&(ST)), 0, sizeof(ST))
+#define putnn(ST, REG, X)   (ST.REG = htobe32(unget32(ST, REG) | (((X) \
+				 & REG##_mask) << (31-REG##_offset))))
+#define putpnn(ST, REG, X)  ((ST)->REG = htobe32(ungetp32(ST, REG) \
+				| (((X) & REG##_mask) << (31-REG##_offset))))
+
+#define put32(ST, REG, X)   (ST.REG = htobe32(X))
+#define putp32(ST, REG, X)  ((ST)->REG = htobe32(X))
+#define put64(ST, REG, X)   (ST.REG = htobe64(X))
+#define putp64(ST, REG, X)  ((ST)->REG = htobe64(X))
+
+/*
+ * Completion extension ce(0) ce(1) ce(2).  Bits ce(3-7)
+ * unused.  Section 6.6 Figure 6.7.
+ */
+
+#define get_csb_ce(ST) ((uint32_t)getnn(ST, csb_ce))
+#define get_csb_ce_ms3b(ST) (get_csb_ce(ST) >> 5)
+#define put_csb_ce_ms3b(ST, X) putnn(ST, csb_ce, ((uint32_t)(X) << 5))
+
+#define CSB_CE_PARTIAL         0x4
+#define CSB_CE_TERMINATE       0x2
+#define CSB_CE_TPBC_VALID      0x1
+
+#define csb_ce_termination(X)         (!!((X) & CSB_CE_TERMINATE))
+/* termination, output buffers may be modified, SPBC/TPBC invalid Fig.6-7 */
+
+#define csb_ce_check_completion(X)    (!csb_ce_termination(X))
+/* if not terminated then check full or partial completion */
+
+#define csb_ce_partial_completion(X)  (!!((X) & CSB_CE_PARTIAL))
+#define csb_ce_full_completion(X)     (!csb_ce_partial_completion(X))
+#define csb_ce_tpbc_valid(X)          (!!((X) & CSB_CE_TPBC_VALID))
+/* TPBC indicates successfully stored data count */
+
+#define csb_ce_default_err(X)         csb_ce_termination(X)
+/* most error CEs have CE(0)=0 and CE(1)=1 */
+
+#define csb_ce_cc3_partial(X)         csb_ce_partial_completion(X)
+/* some CC=3 are partially completed, Table 6-8 */
+
+#define csb_ce_cc64(X)                ((X)&(CSB_CE_PARTIAL \
+					| CSB_CE_TERMINATE) == 0)
+/* Compression: when TPBC>SPBC then CC=64 Table 6-8; target didn't
+ * compress smaller than source.
+ */
+
+/* Decompress SFBT combinations Tables 5-3, 6-4, 6-6 */
+
+#define SFBT_BFINAL 0x1
+#define SFBT_LIT    0x4
+#define SFBT_FHT    0x5
+#define SFBT_DHT    0x6
+#define SFBT_HDR    0x7
+
+/*
+ * NX gzip function codes. Table 6.2.
+ * Bits 0:4 are the FC. Bit 5 is used by the DMA controller to
+ * select one of the two Byte Count Limits.
+ */
+
+#define GZIP_FC_LIMIT_MASK                               0x01
+#define GZIP_FC_COMPRESS_FHT                             0x00
+#define GZIP_FC_COMPRESS_DHT                             0x02
+#define GZIP_FC_COMPRESS_FHT_COUNT                       0x04
+#define GZIP_FC_COMPRESS_DHT_COUNT                       0x06
+#define GZIP_FC_COMPRESS_RESUME_FHT                      0x08
+#define GZIP_FC_COMPRESS_RESUME_DHT                      0x0a
+#define GZIP_FC_COMPRESS_RESUME_FHT_COUNT                0x0c
+#define GZIP_FC_COMPRESS_RESUME_DHT_COUNT                0x0e
+#define GZIP_FC_DECOMPRESS                               0x10
+#define GZIP_FC_DECOMPRESS_SINGLE_BLK_N_SUSPEND          0x12
+#define GZIP_FC_DECOMPRESS_RESUME                        0x14
+#define GZIP_FC_DECOMPRESS_RESUME_SINGLE_BLK_N_SUSPEND   0x16
+#define GZIP_FC_WRAP                                     0x1e
+
+#define fc_is_compress(fc)  (((fc) & 0x10) == 0)
+#define fc_has_count(fc)    (fc_is_compress(fc) && (((fc) & 0x4) != 0))
+
+/* CSB.CC Error codes */
+
+#define ERR_NX_OK             0
+#define ERR_NX_ALIGNMENT      1
+#define ERR_NX_OPOVERLAP      2
+#define ERR_NX_DATA_LENGTH    3
+#define ERR_NX_TRANSLATION    5
+#define ERR_NX_PROTECTION     6
+#define ERR_NX_EXTERNAL_UE7   7
+#define ERR_NX_INVALID_OP     8
+#define ERR_NX_PRIVILEGE      9
+#define ERR_NX_INTERNAL_UE   10
+#define ERR_NX_EXTERN_UE_WR  12
+#define ERR_NX_TARGET_SPACE  13
+#define ERR_NX_EXCESSIVE_DDE 14
+#define ERR_NX_TRANSL_WR     15
+#define ERR_NX_PROTECT_WR    16
+#define ERR_NX_SUBFUNCTION   17
+#define ERR_NX_FUNC_ABORT    18
+#define ERR_NX_BYTE_MAX      19
+#define ERR_NX_CORRUPT_CRB   20
+#define ERR_NX_INVALID_CRB   21
+#define ERR_NX_INVALID_DDE   30
+#define ERR_NX_SEGMENTED_DDL 31
+#define ERR_NX_DDE_OVERFLOW  33
+#define ERR_NX_TPBC_GT_SPBC  64
+#define ERR_NX_MISSING_CODE  66
+#define ERR_NX_INVALID_DIST  67
+#define ERR_NX_INVALID_DHT   68
+#define ERR_NX_EXTERNAL_UE90 90
+#define ERR_NX_WDOG_TIMER   224
+#define ERR_NX_AT_FAULT     250
+#define ERR_NX_INTR_SERVER  252
+#define ERR_NX_UE253        253
+#define ERR_NX_NO_HW        254
+#define ERR_NX_HUNG_OP      255
+#define ERR_NX_END          256
+
+/* initial values for non-resume operations */
+#define INIT_CRC   0  /* crc32(0L, Z_NULL, 0) */
+#define INIT_ADLER 1  /* adler32(0L, Z_NULL, 0)  adler is initialized to 1 */
+
+/* prototypes */
+int nxu_submit_job(struct nx_gzip_crb_cpb_t *c, void *handle);
+
+extern void nxu_sigsegv_handler(int sig, siginfo_t *info, void *ctx);
+extern int nxu_touch_pages(void *buf, long buf_len, long page_len, int wr);
+
+/* caller supplies a print buffer 4*sizeof(crb) */
+
+char *nx_crb_str(struct nx_gzip_crb_t *crb, char *prbuf);
+char *nx_cpb_str(struct nx_gzip_cpb_t *cpb, char *prbuf);
+char *nx_prt_hex(void *cp, int sz, char *prbuf);
+char *nx_lzcount_str(struct nx_gzip_cpb_t *cpb, char *prbuf);
+char *nx_strerror(int e);
+
+#ifdef NX_SIM
+#include <stdio.h>
+int nx_sim_init(void *ctx);
+int nx_sim_end(void *ctx);
+int nxu_run_sim_job(struct nx_gzip_crb_cpb_t *c, void *ctx);
+#endif /* NX_SIM */
+
+/* Deflate stream manipulation */
+
+#define set_final_bit(x)	(x |= (unsigned char)1)
+#define clr_final_bit(x)	(x &= ~(unsigned char)1)
+
+#define append_empty_fh_blk(p, b) do { *(p) = (2 | (1&(b))); *((p)+1) = 0; \
+					} while (0)
+/* append 10 bits 0000001b 00...... ;
+ * assumes appending starts on a byte boundary; b is the final bit.
+ */
+
+
+#ifdef NX_842
+
+/* 842 Engine */
+
+struct nx_eft_crb_t {
+	union {                   /* byte[0:3]   */
+		uint32_t eft_fc;      /* bits[29-31] */
+	};
+	uint32_t reserved1;       /* byte[4:7]   */
+	union {
+		uint64_t csb_address; /* byte[8:15]  */
+		struct {
+			uint32_t reserved2;
+			union {
+				uint32_t crb_c;
+				/* c==0 no ccb defined */
+
+				uint32_t crb_at;
+				/* at==0 address type is ignored;
+				 * all addrs effective assumed.
+				 */
+
+			};
+		};
+	};
+	struct nx_dde_t source_dde;           /* byte[16:31] */
+	struct nx_dde_t target_dde;           /* byte[32:47] */
+	struct nx_ccb_t ccb;                  /* byte[48:63] */
+	union {
+		union nx_qw_t reserved64[3];     /* byte[64:96] */
+	};
+	struct nx_csb_t csb;
+} __aligned(128);
+
+/* 842 CRB */
+
+#define EFT_FC_MASK                 size_mask(3)
+#define EFT_FC_OFFSET               31
+#define EFT_FC_COMPRESS             0x0
+#define EFT_FC_COMPRESS_WITH_CRC    0x1
+#define EFT_FC_DECOMPRESS           0x2
+#define EFT_FC_DECOMPRESS_WITH_CRC  0x3
+#define EFT_FC_BLK_DATA_MOVE        0x4
+#endif /* NX_842 */
+
+#endif /* _NXU_H */
diff --git a/tools/testing/selftests/powerpc/nx-gzip/include/vas-api.h b/tools/testing/selftests/powerpc/nx-gzip/include/vas-api.h
new file mode 120000
index 000000000000..77fb4c7236d0
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/include/vas-api.h
@@ -0,0 +1 @@
+../../../../../../arch/powerpc/include/uapi/asm/vas-api.h
\ No newline at end of file
diff --git a/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh b/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh
new file mode 100755
index 000000000000..c7b46c5fd7b3
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh
@@ -0,0 +1,46 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+if [[ ! -w /dev/crypto/nx-gzip ]]; then
+	echo "Can't access /dev/crypto/nx-gzip, skipping"
+	echo "skip: $0"
+	exit 4
+fi
+
+set -e
+
+function cleanup
+{
+	rm -f nx-tempfile*
+}
+
+trap cleanup EXIT
+
+function test_sizes
+{
+	local n=$1
+	local fname="nx-tempfile.$n"
+
+	for size in 4K 64K 1M 64M
+	do
+		echo "Testing $size ($n) ..."
+		dd if=/dev/urandom of=$fname bs=$size count=1
+		./gzfht_test $fname
+		./gunz_test ${fname}.nx.gz
+	done
+}
+
+echo "Doing basic test of different sizes ..."
+test_sizes 0
+
+echo "Running tests in parallel ..."
+for i in {1..16}
+do
+	test_sizes $i &
+done
+
+wait
+
+echo "OK"
+
+exit 0
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/trace.h b/tools/testing/selftests/powerpc/pmu/ebb/trace.h
index 7c0fb5d2bdb1..da2a3be5441f 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/trace.h
+++ b/tools/testing/selftests/powerpc/pmu/ebb/trace.h
@@ -18,7 +18,7 @@ struct trace_entry
 {
 	u8 type;
 	u8 length;
-	u8 data[0];
+	u8 data[];
 };
 
 struct trace_buffer
@@ -26,7 +26,7 @@ struct trace_buffer
 	u64  size;
 	bool overflow;
 	void *tail;
-	u8   data[0];
+	u8   data[];
 };
 
 struct trace_buffer *trace_buffer_allocate(u64 size);
diff --git a/tools/testing/selftests/proc/.gitignore b/tools/testing/selftests/proc/.gitignore
index 4bca5a9327a4..bed4b5318a86 100644
--- a/tools/testing/selftests/proc/.gitignore
+++ b/tools/testing/selftests/proc/.gitignore
@@ -2,7 +2,9 @@
 /fd-001-lookup
 /fd-002-posix-eq
 /fd-003-kthread
+/proc-fsconfig-hidepid
 /proc-loadavg-001
+/proc-multiple-procfs
 /proc-pid-vm
 /proc-self-map-files-001
 /proc-self-map-files-002
diff --git a/tools/testing/selftests/proc/Makefile b/tools/testing/selftests/proc/Makefile
index a8ed0f684829..8be8a03d2973 100644
--- a/tools/testing/selftests/proc/Makefile
+++ b/tools/testing/selftests/proc/Makefile
@@ -19,5 +19,7 @@ TEST_GEN_PROGS += self
 TEST_GEN_PROGS += setns-dcache
 TEST_GEN_PROGS += setns-sysvipc
 TEST_GEN_PROGS += thread-self
+TEST_GEN_PROGS += proc-multiple-procfs
+TEST_GEN_PROGS += proc-fsconfig-hidepid
 
 include ../lib.mk
diff --git a/tools/testing/selftests/proc/proc-fsconfig-hidepid.c b/tools/testing/selftests/proc/proc-fsconfig-hidepid.c
new file mode 100644
index 000000000000..b9af8f537185
--- /dev/null
+++ b/tools/testing/selftests/proc/proc-fsconfig-hidepid.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright © 2020 Alexey Gladkov <gladkov.alexey@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <assert.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <linux/mount.h>
+#include <linux/unistd.h>
+
+static inline int fsopen(const char *fsname, unsigned int flags)
+{
+	return syscall(__NR_fsopen, fsname, flags);
+}
+
+static inline int fsconfig(int fd, unsigned int cmd, const char *key, const void *val, int aux)
+{
+	return syscall(__NR_fsconfig, fd, cmd, key, val, aux);
+}
+
+int main(void)
+{
+	int fsfd, ret;
+	int hidepid = 2;
+
+	assert((fsfd = fsopen("proc", 0)) != -1);
+
+	ret = fsconfig(fsfd, FSCONFIG_SET_BINARY, "hidepid", &hidepid, 0);
+	assert(ret == -1);
+	assert(errno == EINVAL);
+
+	assert(!fsconfig(fsfd, FSCONFIG_SET_STRING, "hidepid", "2", 0));
+	assert(!fsconfig(fsfd, FSCONFIG_SET_STRING, "hidepid", "invisible", 0));
+
+	assert(!close(fsfd));
+
+	return 0;
+}
diff --git a/tools/testing/selftests/proc/proc-multiple-procfs.c b/tools/testing/selftests/proc/proc-multiple-procfs.c
new file mode 100644
index 000000000000..ab912ad95dab
--- /dev/null
+++ b/tools/testing/selftests/proc/proc-multiple-procfs.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright © 2020 Alexey Gladkov <gladkov.alexey@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <assert.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/mount.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+int main(void)
+{
+	struct stat proc_st1, proc_st2;
+	char procbuff[] = "/tmp/proc.XXXXXX/meminfo";
+	char procdir1[] = "/tmp/proc.XXXXXX";
+	char procdir2[] = "/tmp/proc.XXXXXX";
+
+	assert(mkdtemp(procdir1) != NULL);
+	assert(mkdtemp(procdir2) != NULL);
+
+	assert(!mount("proc", procdir1, "proc", 0, "hidepid=1"));
+	assert(!mount("proc", procdir2, "proc", 0, "hidepid=2"));
+
+	snprintf(procbuff, sizeof(procbuff), "%s/meminfo", procdir1);
+	assert(!stat(procbuff, &proc_st1));
+
+	snprintf(procbuff, sizeof(procbuff), "%s/meminfo", procdir2);
+	assert(!stat(procbuff, &proc_st2));
+
+	umount(procdir1);
+	umount(procdir2);
+
+	assert(proc_st1.st_dev != proc_st2.st_dev);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/rcutorture/bin/functions.sh b/tools/testing/selftests/rcutorture/bin/functions.sh
index 12810229fddc..436b1542cf27 100644
--- a/tools/testing/selftests/rcutorture/bin/functions.sh
+++ b/tools/testing/selftests/rcutorture/bin/functions.sh
@@ -215,9 +215,6 @@ identify_qemu_args () {
 		then
 			echo -device spapr-vlan,netdev=net0,mac=$TORTURE_QEMU_MAC
 			echo -netdev bridge,br=br0,id=net0
-		elif test -n "$TORTURE_QEMU_INTERACTIVE"
-		then
-			echo -net nic -net user
 		fi
 		;;
 	esac
@@ -275,3 +272,21 @@ specify_qemu_cpus () {
 		esac
 	fi
 }
+
+# specify_qemu_net qemu-args
+#
+# Appends a string containing "-net none" to qemu-args, unless the incoming
+# qemu-args already contains "-smp" or unless the TORTURE_QEMU_INTERACTIVE
+# environment variable is set, in which case the string that is be added is
+# instead "-net nic -net user".
+specify_qemu_net () {
+	if echo $1 | grep -q -e -net
+	then
+		echo $1
+	elif test -n "$TORTURE_QEMU_INTERACTIVE"
+	then
+		echo $1 -net nic -net user
+	else
+		echo $1 -net none
+	fi
+}
diff --git a/tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh b/tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh
new file mode 100755
index 000000000000..e5cc6b2f195e
--- /dev/null
+++ b/tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+#
+# If this was a KCSAN run, collapse the reports in the various console.log
+# files onto pairs of functions.
+#
+# Usage: kcsan-collapse.sh resultsdir
+#
+# Copyright (C) 2020 Facebook, Inc.
+#
+# Authors: Paul E. McKenney <paulmck@kernel.org>
+
+if test -z "$TORTURE_KCONFIG_KCSAN_ARG"
+then
+	exit 0
+fi
+cat $1/*/console.log |
+	grep "BUG: KCSAN: " |
+	sed -e 's/^\[[^]]*] //' |
+	sort |
+	uniq -c |
+	sort -k1nr > $1/kcsan.sum
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh
index 9d9a41625dd9..1706cd4466b4 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh
@@ -41,7 +41,21 @@ else
 		title="$title ($ngpsps/s)"
 	fi
 	echo $title $stopstate $fwdprog
-	nclosecalls=`grep --binary-files=text 'torture: Reader Batch' $i/console.log | tail -1 | awk '{for (i=NF-8;i<=NF;i++) sum+=$i; } END {print sum}'`
+	nclosecalls=`grep --binary-files=text 'torture: Reader Batch' $i/console.log | tail -1 | \
+		awk -v sum=0 '
+		{
+			for (i = 0; i <= NF; i++) {
+				sum += $i;
+				if ($i ~ /Batch:/) {
+					sum = 0;
+					i = i + 2;
+				}
+			}
+		}
+
+		END {
+			print sum
+		}'`
 	if test -z "$nclosecalls"
 	then
 		exit 0
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
index 0326f4a5ff9c..2261aa676304 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
@@ -31,6 +31,7 @@ do
 			head -1 $resdir/log
 		fi
 		TORTURE_SUITE="`cat $i/../TORTURE_SUITE`"
+		configfile=`echo $i | sed -e 's,^.*/,,'`
 		rm -f $i/console.log.*.diags
 		kvm-recheck-${TORTURE_SUITE}.sh $i
 		if test -f "$i/qemu-retval" && test "`cat $i/qemu-retval`" -ne 0 && test "`cat $i/qemu-retval`" -ne 137
@@ -70,6 +71,15 @@ do
 			fi
 		fi
 	done
+	if test -f "$rd/kcsan.sum"
+	then
+		if test -s "$rd/kcsan.sum"
+		then
+			echo KCSAN summary in $rd/kcsan.sum
+		else
+			echo Clean KCSAN run in $rd
+		fi
+	fi
 done
 EDITOR=echo kvm-find-errors.sh "${@: -1}" > $T 2>&1
 ret=$?
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
index e0352304b98b..1b9aebd54cc9 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
@@ -44,30 +44,32 @@ then
 fi
 echo ' ---' `date`: Starting build
 echo ' ---' Kconfig fragment at: $config_template >> $resdir/log
-touch $resdir/ConfigFragment.input $resdir/ConfigFragment
-if test -r "$config_dir/CFcommon"
-then
-	echo " --- $config_dir/CFcommon" >> $resdir/ConfigFragment.input
-	cat < $config_dir/CFcommon >> $resdir/ConfigFragment.input
-	config_override.sh $config_dir/CFcommon $config_template > $T/Kc1
-	grep '#CHECK#' $config_dir/CFcommon >> $resdir/ConfigFragment
-else
-	cp $config_template $T/Kc1
-fi
-echo " --- $config_template" >> $resdir/ConfigFragment.input
-cat $config_template >> $resdir/ConfigFragment.input
-grep '#CHECK#' $config_template >> $resdir/ConfigFragment
-if test -n "$TORTURE_KCONFIG_ARG"
-then
-	echo $TORTURE_KCONFIG_ARG | tr -s " " "\012" > $T/cmdline
-	echo " --- --kconfig argument" >> $resdir/ConfigFragment.input
-	cat $T/cmdline >> $resdir/ConfigFragment.input
-	config_override.sh $T/Kc1 $T/cmdline > $T/Kc2
-	# Note that "#CHECK#" is not permitted on commandline.
-else
-	cp $T/Kc1 $T/Kc2
-fi
-cat $T/Kc2 >> $resdir/ConfigFragment
+touch $resdir/ConfigFragment.input
+
+# Combine additional Kconfig options into an existing set such that
+# newer options win.  The first argument is the Kconfig source ID, the
+# second the to-be-updated file within $T, and the third and final the
+# list of additional Kconfig options.  Note that a $2.tmp file is
+# created when doing the update.
+config_override_param () {
+	if test -n "$3"
+	then
+		echo $3 | sed -e 's/^ *//' -e 's/ *$//' | tr -s " " "\012" > $T/Kconfig_args
+		echo " --- $1" >> $resdir/ConfigFragment.input
+		cat $T/Kconfig_args >> $resdir/ConfigFragment.input
+		config_override.sh $T/$2 $T/Kconfig_args > $T/$2.tmp
+		mv $T/$2.tmp $T/$2
+		# Note that "#CHECK#" is not permitted on commandline.
+	fi
+}
+
+echo > $T/KcList
+config_override_param "$config_dir/CFcommon" KcList "`cat $config_dir/CFcommon 2> /dev/null`"
+config_override_param "$config_template" KcList "`cat $config_template 2> /dev/null`"
+config_override_param "--kasan options" KcList "$TORTURE_KCONFIG_KASAN_ARG"
+config_override_param "--kcsan options" KcList "$TORTURE_KCONFIG_KCSAN_ARG"
+config_override_param "--kconfig argument" KcList "$TORTURE_KCONFIG_ARG"
+cp $T/KcList $resdir/ConfigFragment
 
 base_resdir=`echo $resdir | sed -e 's/\.[0-9]\+$//'`
 if test "$base_resdir" != "$resdir" -a -f $base_resdir/bzImage -a -f $base_resdir/vmlinux
@@ -80,7 +82,7 @@ then
 	ln -s $base_resdir/.config $resdir  # for kvm-recheck.sh
 	# Arch-independent indicator
 	touch $resdir/builtkernel
-elif kvm-build.sh $T/Kc2 $resdir
+elif kvm-build.sh $T/KcList $resdir
 then
 	# Had to build a kernel for this test.
 	QEMU="`identify_qemu vmlinux`"
@@ -139,6 +141,7 @@ then
 	cpu_count=$TORTURE_ALLOTED_CPUS
 fi
 qemu_args="`specify_qemu_cpus "$QEMU" "$qemu_args" "$cpu_count"`"
+qemu_args="`specify_qemu_net "$qemu_args"`"
 
 # Generate architecture-specific and interaction-specific qemu arguments
 qemu_args="$qemu_args `identify_qemu_args "$QEMU" "$resdir/console.log"`"
diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh
index 2315e2ec12d6..c279cf9cb010 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm.sh
@@ -31,6 +31,8 @@ TORTURE_DEFCONFIG=defconfig
 TORTURE_BOOT_IMAGE=""
 TORTURE_INITRD="$KVM/initrd"; export TORTURE_INITRD
 TORTURE_KCONFIG_ARG=""
+TORTURE_KCONFIG_KASAN_ARG=""
+TORTURE_KCONFIG_KCSAN_ARG=""
 TORTURE_KMAKE_ARG=""
 TORTURE_QEMU_MEM=512
 TORTURE_SHUTDOWN_GRACE=180
@@ -133,6 +135,12 @@ do
 		TORTURE_KCONFIG_ARG="$2"
 		shift
 		;;
+	--kasan)
+		TORTURE_KCONFIG_KASAN_ARG="CONFIG_DEBUG_INFO=y CONFIG_KASAN=y"; export TORTURE_KCONFIG_KASAN_ARG
+		;;
+	--kcsan)
+		TORTURE_KCONFIG_KCSAN_ARG="CONFIG_DEBUG_INFO=y CONFIG_KCSAN=y CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000 CONFIG_KCSAN_VERBOSE=y CONFIG_KCSAN_INTERRUPT_WATCHER=y"; export TORTURE_KCONFIG_KCSAN_ARG
+		;;
 	--kmake-arg)
 		checkarg --kmake-arg "(kernel make arguments)" $# "$2" '.*' '^error$'
 		TORTURE_KMAKE_ARG="$2"
@@ -310,6 +318,8 @@ TORTURE_BUILDONLY="$TORTURE_BUILDONLY"; export TORTURE_BUILDONLY
 TORTURE_DEFCONFIG="$TORTURE_DEFCONFIG"; export TORTURE_DEFCONFIG
 TORTURE_INITRD="$TORTURE_INITRD"; export TORTURE_INITRD
 TORTURE_KCONFIG_ARG="$TORTURE_KCONFIG_ARG"; export TORTURE_KCONFIG_ARG
+TORTURE_KCONFIG_KASAN_ARG="$TORTURE_KCONFIG_KASAN_ARG"; export TORTURE_KCONFIG_KASAN_ARG
+TORTURE_KCONFIG_KCSAN_ARG="$TORTURE_KCONFIG_KCSAN_ARG"; export TORTURE_KCONFIG_KCSAN_ARG
 TORTURE_KMAKE_ARG="$TORTURE_KMAKE_ARG"; export TORTURE_KMAKE_ARG
 TORTURE_QEMU_CMD="$TORTURE_QEMU_CMD"; export TORTURE_QEMU_CMD
 TORTURE_QEMU_INTERACTIVE="$TORTURE_QEMU_INTERACTIVE"; export TORTURE_QEMU_INTERACTIVE
@@ -464,6 +474,7 @@ echo
 echo
 echo " --- `date` Test summary:"
 echo Results directory: $resdir/$ds
+kcsan-collapse.sh $resdir/$ds
 kvm-recheck.sh $resdir/$ds
 ___EOF___
 
diff --git a/tools/testing/selftests/rcutorture/bin/parse-console.sh b/tools/testing/selftests/rcutorture/bin/parse-console.sh
index 4bf62d7b1cbc..1c64ca85438c 100755
--- a/tools/testing/selftests/rcutorture/bin/parse-console.sh
+++ b/tools/testing/selftests/rcutorture/bin/parse-console.sh
@@ -44,11 +44,23 @@ then
 		tail -1 |
 		awk '
 		{
-			for (i=NF-8;i<=NF;i++)
+			normalexit = 1;
+			for (i=NF-8;i<=NF;i++) {
+				if (i <= 0 || i !~ /^[0-9]*$/) {
+					bangstring = $0;
+					gsub(/^\[[^]]*] /, "", bangstring);
+					print bangstring;
+					normalexit = 0;
+					exit 0;
+				}
 				sum+=$i;
+			}
 		}
-		END { print sum }'`
-		print_bug $title FAILURE, $nerrs instances
+		END {
+			if (normalexit)
+				print sum " instances"
+		}'`
+		print_bug $title FAILURE, $nerrs
 		exit
 	fi
 
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFLIST b/tools/testing/selftests/rcutorture/configs/rcu/CFLIST
index c3c1fb5a9e1f..f2b20db9e296 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/CFLIST
+++ b/tools/testing/selftests/rcutorture/configs/rcu/CFLIST
@@ -14,3 +14,6 @@ TINY02
 TASKS01
 TASKS02
 TASKS03
+RUDE01
+TRACE01
+TRACE02
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/RUDE01 b/tools/testing/selftests/rcutorture/configs/rcu/RUDE01
new file mode 100644
index 000000000000..bafe94cbd739
--- /dev/null
+++ b/tools/testing/selftests/rcutorture/configs/rcu/RUDE01
@@ -0,0 +1,10 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+#CHECK#CONFIG_PROVE_RCU=y
+CONFIG_RCU_EXPERT=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/RUDE01.boot b/tools/testing/selftests/rcutorture/configs/rcu/RUDE01.boot
new file mode 100644
index 000000000000..9363708c9075
--- /dev/null
+++ b/tools/testing/selftests/rcutorture/configs/rcu/RUDE01.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=tasks-rude
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TRACE01 b/tools/testing/selftests/rcutorture/configs/rcu/TRACE01
new file mode 100644
index 000000000000..12e7661b86f5
--- /dev/null
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TRACE01
@@ -0,0 +1,11 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=y
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=n
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+#CHECK#CONFIG_PROVE_RCU=y
+CONFIG_TASKS_TRACE_RCU_READ_MB=y
+CONFIG_RCU_EXPERT=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TRACE01.boot b/tools/testing/selftests/rcutorture/configs/rcu/TRACE01.boot
new file mode 100644
index 000000000000..9675ad632dcc
--- /dev/null
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TRACE01.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=tasks-tracing
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TRACE02 b/tools/testing/selftests/rcutorture/configs/rcu/TRACE02
new file mode 100644
index 000000000000..b69ed6673c41
--- /dev/null
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TRACE02
@@ -0,0 +1,11 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_PROVE_LOCKING=n
+#CHECK#CONFIG_PROVE_RCU=n
+CONFIG_TASKS_TRACE_RCU_READ_MB=n
+CONFIG_RCU_EXPERT=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TRACE02.boot b/tools/testing/selftests/rcutorture/configs/rcu/TRACE02.boot
new file mode 100644
index 000000000000..9675ad632dcc
--- /dev/null
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TRACE02.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=tasks-tracing
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE10 b/tools/testing/selftests/rcutorture/configs/rcu/TREE10
index 2debe7891aeb..7311f84a5876 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE10
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE10
@@ -1,5 +1,5 @@
 CONFIG_SMP=y
-CONFIG_NR_CPUS=100
+CONFIG_NR_CPUS=56
 CONFIG_PREEMPT_NONE=y
 CONFIG_PREEMPT_VOLUNTARY=n
 CONFIG_PREEMPT=n
diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh
index 6a970b127c9b..ef6417b8067b 100755
--- a/tools/testing/selftests/sysctl/sysctl.sh
+++ b/tools/testing/selftests/sysctl/sysctl.sh
@@ -39,10 +39,11 @@ ALL_TESTS="$ALL_TESTS 0003:1:1:int_0002"
 ALL_TESTS="$ALL_TESTS 0004:1:1:uint_0001"
 ALL_TESTS="$ALL_TESTS 0005:3:1:int_0003"
 ALL_TESTS="$ALL_TESTS 0006:50:1:bitmap_0001"
+ALL_TESTS="$ALL_TESTS 0007:1:1:boot_int"
 
 test_modprobe()
 {
-       if [ ! -d $DIR ]; then
+       if [ ! -d $SYSCTL ]; then
                echo "$0: $DIR not present" >&2
                echo "You must have the following enabled in your kernel:" >&2
                cat $TEST_DIR/config >&2
@@ -122,9 +123,9 @@ test_reqs()
 
 function load_req_mod()
 {
-	if [ ! -d $DIR ]; then
+	if [ ! -d $DIR -a ! -d $SYSCTL ]; then
 		if ! modprobe -q -n $TEST_DRIVER; then
-			echo "$0: module $TEST_DRIVER not found [SKIP]"
+			echo "$0: module $TEST_DRIVER not found and not built-in [SKIP]"
 			exit $ksft_skip
 		fi
 		modprobe $TEST_DRIVER
@@ -752,6 +753,40 @@ sysctl_test_0006()
 	run_bitmaptest
 }
 
+sysctl_test_0007()
+{
+	TARGET="${SYSCTL}/boot_int"
+	if [ -d $DIR ]; then
+		echo "Boot param test only possible sysctl_test is built-in, not module:"
+		cat $TEST_DIR/config >&2
+		return 0
+	fi
+
+	echo -n "Testing if $TARGET is set to 1 ..."
+	ORIG=$(cat "${TARGET}")
+
+	if [ x$ORIG = "x1" ]; then
+		echo "ok"
+		return 0
+	fi
+	echo "FAIL"
+	echo "Checking if /proc/cmdline contains setting of the expected parameter ..."
+	if [ ! -f /proc/cmdline ]; then
+		echo "/proc/cmdline does not exist, test inconclusive"
+		return 0
+	fi
+
+	FOUND=$(grep -c "sysctl[./]debug[./]test_sysctl[./]boot_int=1" /proc/cmdline)
+	if [ $FOUND = "1" ]; then
+		echo "Kernel param found but $TARGET is not 1, TEST FAILED"
+		rc=1
+		test_rc
+	fi
+
+	echo "Skipping test, expected kernel parameter missing."
+	echo "To perform this test, make sure kernel is booted with parameter: sysctl.debug.test_sysctl.boot_int=1"
+}
+
 list_tests()
 {
 	echo "Test ID list:"
@@ -766,6 +801,7 @@ list_tests()
 	echo "0004 x $(get_test_count 0004) - tests proc_douintvec()"
 	echo "0005 x $(get_test_count 0005) - tests proc_douintvec() array"
 	echo "0006 x $(get_test_count 0006) - tests proc_do_large_bitmap()"
+	echo "0007 x $(get_test_count 0007) - tests setting sysctl from kernel boot param"
 }
 
 usage()
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json b/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json
index f8ea6f5fa8e9..72cdc3c800a5 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json
@@ -1471,6 +1471,31 @@
             "$TC actions flush action pedit"
         ]
     },
+    {
+        "id": "94bb",
+        "name": "Add pedit action with LAYERED_OP ip6 traffic_class",
+        "category": [
+            "actions",
+            "pedit",
+            "layered_op"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action pedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action pedit ex munge ip6 traffic_class set 0x40 continue",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action pedit",
+        "matchPattern": "ipv6\\+0: val 04000000 mask f00fffff",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action pedit"
+        ]
+    },
     {
         "id": "6f5e",
         "name": "Add pedit action with LAYERED_OP ip6 flow_lbl",
diff --git a/tools/testing/selftests/vm/.gitignore b/tools/testing/selftests/vm/.gitignore
index 0edb6d900e8d..74c9326d3f9e 100644
--- a/tools/testing/selftests/vm/.gitignore
+++ b/tools/testing/selftests/vm/.gitignore
@@ -8,6 +8,7 @@ compaction_test
 mlock2-tests
 on-fault-limit
 transhuge-stress
+protection_keys
 userfaultfd
 mlock-intersect-test
 mlock-random-test
diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
index 6998877f707e..d7eae41be628 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -19,6 +19,31 @@ TEST_GEN_FILES += on-fault-limit
 TEST_GEN_FILES += thuge-gen
 TEST_GEN_FILES += transhuge-stress
 TEST_GEN_FILES += userfaultfd
+TEST_GEN_FILES += khugepaged
+
+ifeq ($(ARCH),x86_64)
+CAN_BUILD_I386 := $(shell ./../x86/check_cc.sh $(CC) ../x86/trivial_32bit_program.c -m32)
+CAN_BUILD_X86_64 := $(shell ./../x86/check_cc.sh $(CC) ../x86/trivial_64bit_program.c)
+CAN_BUILD_WITH_NOPIE := $(shell ./../x86/check_cc.sh $(CC) ../x86/trivial_program.c -no-pie)
+
+TARGETS := protection_keys
+BINARIES_32 := $(TARGETS:%=%_32)
+BINARIES_64 := $(TARGETS:%=%_64)
+
+ifeq ($(CAN_BUILD_WITH_NOPIE),1)
+CFLAGS += -no-pie
+endif
+
+ifeq ($(CAN_BUILD_I386),1)
+TEST_GEN_FILES += $(BINARIES_32)
+endif
+
+ifeq ($(CAN_BUILD_X86_64),1)
+TEST_GEN_FILES += $(BINARIES_64)
+endif
+else
+TEST_GEN_FILES += protection_keys
+endif
 
 ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64))
 TEST_GEN_FILES += va_128TBswitch
@@ -33,6 +58,55 @@ TEST_FILES := test_vmalloc.sh
 KSFT_KHDR_INSTALL := 1
 include ../lib.mk
 
+ifeq ($(ARCH),x86_64)
+BINARIES_32 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_32))
+BINARIES_64 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_64))
+
+define gen-target-rule-32
+$(1) $(1)_32: $(OUTPUT)/$(1)_32
+.PHONY: $(1) $(1)_32
+endef
+
+define gen-target-rule-64
+$(1) $(1)_64: $(OUTPUT)/$(1)_64
+.PHONY: $(1) $(1)_64
+endef
+
+ifeq ($(CAN_BUILD_I386),1)
+$(BINARIES_32): CFLAGS += -m32
+$(BINARIES_32): LDLIBS += -lrt -ldl -lm
+$(BINARIES_32): %_32: %.c
+	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(notdir $^) $(LDLIBS) -o $@
+$(foreach t,$(TARGETS),$(eval $(call gen-target-rule-32,$(t))))
+endif
+
+ifeq ($(CAN_BUILD_X86_64),1)
+$(BINARIES_64): CFLAGS += -m64
+$(BINARIES_64): LDLIBS += -lrt -ldl
+$(BINARIES_64): %_64: %.c
+	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(notdir $^) $(LDLIBS) -o $@
+$(foreach t,$(TARGETS),$(eval $(call gen-target-rule-64,$(t))))
+endif
+
+# x86_64 users should be encouraged to install 32-bit libraries
+ifeq ($(CAN_BUILD_I386)$(CAN_BUILD_X86_64),01)
+all: warn_32bit_failure
+
+warn_32bit_failure:
+	@echo "Warning: you seem to have a broken 32-bit build" 2>&1;		\
+	echo  "environment. This will reduce test coverage of 64-bit" 2>&1;	\
+	echo  "kernels. If you are using a Debian-like distribution," 2>&1;	\
+	echo  "try:"; 2>&1;							\
+	echo  "";								\
+	echo  "  apt-get install gcc-multilib libc6-i386 libc6-dev-i386";	\
+	echo  "";								\
+	echo  "If you are using a Fedora-like distribution, try:";		\
+	echo  "";								\
+	echo  "  yum install glibc-devel.*i686";				\
+	exit 0;
+endif
+endif
+
 $(OUTPUT)/userfaultfd: LDLIBS += -lpthread
 
 $(OUTPUT)/mlock-random-test: LDLIBS += -lcap
diff --git a/tools/testing/selftests/vm/khugepaged.c b/tools/testing/selftests/vm/khugepaged.c
new file mode 100644
index 000000000000..51b89cedd09d
--- /dev/null
+++ b/tools/testing/selftests/vm/khugepaged.c
@@ -0,0 +1,1035 @@
+#define _GNU_SOURCE
+#include <fcntl.h>
+#include <limits.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/mman.h>
+#include <sys/wait.h>
+
+#ifndef MADV_PAGEOUT
+#define MADV_PAGEOUT 21
+#endif
+
+#define BASE_ADDR ((void *)(1UL << 30))
+static unsigned long hpage_pmd_size;
+static unsigned long page_size;
+static int hpage_pmd_nr;
+
+#define THP_SYSFS "/sys/kernel/mm/transparent_hugepage/"
+#define PID_SMAPS "/proc/self/smaps"
+
+enum thp_enabled {
+	THP_ALWAYS,
+	THP_MADVISE,
+	THP_NEVER,
+};
+
+static const char *thp_enabled_strings[] = {
+	"always",
+	"madvise",
+	"never",
+	NULL
+};
+
+enum thp_defrag {
+	THP_DEFRAG_ALWAYS,
+	THP_DEFRAG_DEFER,
+	THP_DEFRAG_DEFER_MADVISE,
+	THP_DEFRAG_MADVISE,
+	THP_DEFRAG_NEVER,
+};
+
+static const char *thp_defrag_strings[] = {
+	"always",
+	"defer",
+	"defer+madvise",
+	"madvise",
+	"never",
+	NULL
+};
+
+enum shmem_enabled {
+	SHMEM_ALWAYS,
+	SHMEM_WITHIN_SIZE,
+	SHMEM_ADVISE,
+	SHMEM_NEVER,
+	SHMEM_DENY,
+	SHMEM_FORCE,
+};
+
+static const char *shmem_enabled_strings[] = {
+	"always",
+	"within_size",
+	"advise",
+	"never",
+	"deny",
+	"force",
+	NULL
+};
+
+struct khugepaged_settings {
+	bool defrag;
+	unsigned int alloc_sleep_millisecs;
+	unsigned int scan_sleep_millisecs;
+	unsigned int max_ptes_none;
+	unsigned int max_ptes_swap;
+	unsigned int max_ptes_shared;
+	unsigned long pages_to_scan;
+};
+
+struct settings {
+	enum thp_enabled thp_enabled;
+	enum thp_defrag thp_defrag;
+	enum shmem_enabled shmem_enabled;
+	bool debug_cow;
+	bool use_zero_page;
+	struct khugepaged_settings khugepaged;
+};
+
+static struct settings default_settings = {
+	.thp_enabled = THP_MADVISE,
+	.thp_defrag = THP_DEFRAG_ALWAYS,
+	.shmem_enabled = SHMEM_NEVER,
+	.debug_cow = 0,
+	.use_zero_page = 0,
+	.khugepaged = {
+		.defrag = 1,
+		.alloc_sleep_millisecs = 10,
+		.scan_sleep_millisecs = 10,
+	},
+};
+
+static struct settings saved_settings;
+static bool skip_settings_restore;
+
+static int exit_status;
+
+static void success(const char *msg)
+{
+	printf(" \e[32m%s\e[0m\n", msg);
+}
+
+static void fail(const char *msg)
+{
+	printf(" \e[31m%s\e[0m\n", msg);
+	exit_status++;
+}
+
+static int read_file(const char *path, char *buf, size_t buflen)
+{
+	int fd;
+	ssize_t numread;
+
+	fd = open(path, O_RDONLY);
+	if (fd == -1)
+		return 0;
+
+	numread = read(fd, buf, buflen - 1);
+	if (numread < 1) {
+		close(fd);
+		return 0;
+	}
+
+	buf[numread] = '\0';
+	close(fd);
+
+	return (unsigned int) numread;
+}
+
+static int write_file(const char *path, const char *buf, size_t buflen)
+{
+	int fd;
+	ssize_t numwritten;
+
+	fd = open(path, O_WRONLY);
+	if (fd == -1)
+		return 0;
+
+	numwritten = write(fd, buf, buflen - 1);
+	close(fd);
+	if (numwritten < 1)
+		return 0;
+
+	return (unsigned int) numwritten;
+}
+
+static int read_string(const char *name, const char *strings[])
+{
+	char path[PATH_MAX];
+	char buf[256];
+	char *c;
+	int ret;
+
+	ret = snprintf(path, PATH_MAX, THP_SYSFS "%s", name);
+	if (ret >= PATH_MAX) {
+		printf("%s: Pathname is too long\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+
+	if (!read_file(path, buf, sizeof(buf))) {
+		perror(path);
+		exit(EXIT_FAILURE);
+	}
+
+	c = strchr(buf, '[');
+	if (!c) {
+		printf("%s: Parse failure\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+
+	c++;
+	memmove(buf, c, sizeof(buf) - (c - buf));
+
+	c = strchr(buf, ']');
+	if (!c) {
+		printf("%s: Parse failure\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+	*c = '\0';
+
+	ret = 0;
+	while (strings[ret]) {
+		if (!strcmp(strings[ret], buf))
+			return ret;
+		ret++;
+	}
+
+	printf("Failed to parse %s\n", name);
+	exit(EXIT_FAILURE);
+}
+
+static void write_string(const char *name, const char *val)
+{
+	char path[PATH_MAX];
+	int ret;
+
+	ret = snprintf(path, PATH_MAX, THP_SYSFS "%s", name);
+	if (ret >= PATH_MAX) {
+		printf("%s: Pathname is too long\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+
+	if (!write_file(path, val, strlen(val) + 1)) {
+		perror(path);
+		exit(EXIT_FAILURE);
+	}
+}
+
+static const unsigned long read_num(const char *name)
+{
+	char path[PATH_MAX];
+	char buf[21];
+	int ret;
+
+	ret = snprintf(path, PATH_MAX, THP_SYSFS "%s", name);
+	if (ret >= PATH_MAX) {
+		printf("%s: Pathname is too long\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+
+	ret = read_file(path, buf, sizeof(buf));
+	if (ret < 0) {
+		perror("read_file(read_num)");
+		exit(EXIT_FAILURE);
+	}
+
+	return strtoul(buf, NULL, 10);
+}
+
+static void write_num(const char *name, unsigned long num)
+{
+	char path[PATH_MAX];
+	char buf[21];
+	int ret;
+
+	ret = snprintf(path, PATH_MAX, THP_SYSFS "%s", name);
+	if (ret >= PATH_MAX) {
+		printf("%s: Pathname is too long\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+
+	sprintf(buf, "%ld", num);
+	if (!write_file(path, buf, strlen(buf) + 1)) {
+		perror(path);
+		exit(EXIT_FAILURE);
+	}
+}
+
+static void write_settings(struct settings *settings)
+{
+	struct khugepaged_settings *khugepaged = &settings->khugepaged;
+
+	write_string("enabled", thp_enabled_strings[settings->thp_enabled]);
+	write_string("defrag", thp_defrag_strings[settings->thp_defrag]);
+	write_string("shmem_enabled",
+			shmem_enabled_strings[settings->shmem_enabled]);
+	write_num("debug_cow", settings->debug_cow);
+	write_num("use_zero_page", settings->use_zero_page);
+
+	write_num("khugepaged/defrag", khugepaged->defrag);
+	write_num("khugepaged/alloc_sleep_millisecs",
+			khugepaged->alloc_sleep_millisecs);
+	write_num("khugepaged/scan_sleep_millisecs",
+			khugepaged->scan_sleep_millisecs);
+	write_num("khugepaged/max_ptes_none", khugepaged->max_ptes_none);
+	write_num("khugepaged/max_ptes_swap", khugepaged->max_ptes_swap);
+	write_num("khugepaged/max_ptes_shared", khugepaged->max_ptes_shared);
+	write_num("khugepaged/pages_to_scan", khugepaged->pages_to_scan);
+}
+
+static void restore_settings(int sig)
+{
+	if (skip_settings_restore)
+		goto out;
+
+	printf("Restore THP and khugepaged settings...");
+	write_settings(&saved_settings);
+	success("OK");
+	if (sig)
+		exit(EXIT_FAILURE);
+out:
+	exit(exit_status);
+}
+
+static void save_settings(void)
+{
+	printf("Save THP and khugepaged settings...");
+	saved_settings = (struct settings) {
+		.thp_enabled = read_string("enabled", thp_enabled_strings),
+		.thp_defrag = read_string("defrag", thp_defrag_strings),
+		.shmem_enabled =
+			read_string("shmem_enabled", shmem_enabled_strings),
+		.debug_cow = read_num("debug_cow"),
+		.use_zero_page = read_num("use_zero_page"),
+	};
+	saved_settings.khugepaged = (struct khugepaged_settings) {
+		.defrag = read_num("khugepaged/defrag"),
+		.alloc_sleep_millisecs =
+			read_num("khugepaged/alloc_sleep_millisecs"),
+		.scan_sleep_millisecs =
+			read_num("khugepaged/scan_sleep_millisecs"),
+		.max_ptes_none = read_num("khugepaged/max_ptes_none"),
+		.max_ptes_swap = read_num("khugepaged/max_ptes_swap"),
+		.max_ptes_shared = read_num("khugepaged/max_ptes_shared"),
+		.pages_to_scan = read_num("khugepaged/pages_to_scan"),
+	};
+	success("OK");
+
+	signal(SIGTERM, restore_settings);
+	signal(SIGINT, restore_settings);
+	signal(SIGHUP, restore_settings);
+	signal(SIGQUIT, restore_settings);
+}
+
+static void adjust_settings(void)
+{
+
+	printf("Adjust settings...");
+	write_settings(&default_settings);
+	success("OK");
+}
+
+#define MAX_LINE_LENGTH 500
+
+static bool check_for_pattern(FILE *fp, char *pattern, char *buf)
+{
+	while (fgets(buf, MAX_LINE_LENGTH, fp) != NULL) {
+		if (!strncmp(buf, pattern, strlen(pattern)))
+			return true;
+	}
+	return false;
+}
+
+static bool check_huge(void *addr)
+{
+	bool thp = false;
+	int ret;
+	FILE *fp;
+	char buffer[MAX_LINE_LENGTH];
+	char addr_pattern[MAX_LINE_LENGTH];
+
+	ret = snprintf(addr_pattern, MAX_LINE_LENGTH, "%08lx-",
+		       (unsigned long) addr);
+	if (ret >= MAX_LINE_LENGTH) {
+		printf("%s: Pattern is too long\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+
+
+	fp = fopen(PID_SMAPS, "r");
+	if (!fp) {
+		printf("%s: Failed to open file %s\n", __func__, PID_SMAPS);
+		exit(EXIT_FAILURE);
+	}
+	if (!check_for_pattern(fp, addr_pattern, buffer))
+		goto err_out;
+
+	ret = snprintf(addr_pattern, MAX_LINE_LENGTH, "AnonHugePages:%10ld kB",
+		       hpage_pmd_size >> 10);
+	if (ret >= MAX_LINE_LENGTH) {
+		printf("%s: Pattern is too long\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+	/*
+	 * Fetch the AnonHugePages: in the same block and check whether it got
+	 * the expected number of hugeepages next.
+	 */
+	if (!check_for_pattern(fp, "AnonHugePages:", buffer))
+		goto err_out;
+
+	if (strncmp(buffer, addr_pattern, strlen(addr_pattern)))
+		goto err_out;
+
+	thp = true;
+err_out:
+	fclose(fp);
+	return thp;
+}
+
+
+static bool check_swap(void *addr, unsigned long size)
+{
+	bool swap = false;
+	int ret;
+	FILE *fp;
+	char buffer[MAX_LINE_LENGTH];
+	char addr_pattern[MAX_LINE_LENGTH];
+
+	ret = snprintf(addr_pattern, MAX_LINE_LENGTH, "%08lx-",
+		       (unsigned long) addr);
+	if (ret >= MAX_LINE_LENGTH) {
+		printf("%s: Pattern is too long\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+
+
+	fp = fopen(PID_SMAPS, "r");
+	if (!fp) {
+		printf("%s: Failed to open file %s\n", __func__, PID_SMAPS);
+		exit(EXIT_FAILURE);
+	}
+	if (!check_for_pattern(fp, addr_pattern, buffer))
+		goto err_out;
+
+	ret = snprintf(addr_pattern, MAX_LINE_LENGTH, "Swap:%19ld kB",
+		       size >> 10);
+	if (ret >= MAX_LINE_LENGTH) {
+		printf("%s: Pattern is too long\n", __func__);
+		exit(EXIT_FAILURE);
+	}
+	/*
+	 * Fetch the Swap: in the same block and check whether it got
+	 * the expected number of hugeepages next.
+	 */
+	if (!check_for_pattern(fp, "Swap:", buffer))
+		goto err_out;
+
+	if (strncmp(buffer, addr_pattern, strlen(addr_pattern)))
+		goto err_out;
+
+	swap = true;
+err_out:
+	fclose(fp);
+	return swap;
+}
+
+static void *alloc_mapping(void)
+{
+	void *p;
+
+	p = mmap(BASE_ADDR, hpage_pmd_size, PROT_READ | PROT_WRITE,
+			MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+	if (p != BASE_ADDR) {
+		printf("Failed to allocate VMA at %p\n", BASE_ADDR);
+		exit(EXIT_FAILURE);
+	}
+
+	return p;
+}
+
+static void fill_memory(int *p, unsigned long start, unsigned long end)
+{
+	int i;
+
+	for (i = start / page_size; i < end / page_size; i++)
+		p[i * page_size / sizeof(*p)] = i + 0xdead0000;
+}
+
+static void validate_memory(int *p, unsigned long start, unsigned long end)
+{
+	int i;
+
+	for (i = start / page_size; i < end / page_size; i++) {
+		if (p[i * page_size / sizeof(*p)] != i + 0xdead0000) {
+			printf("Page %d is corrupted: %#x\n",
+					i, p[i * page_size / sizeof(*p)]);
+			exit(EXIT_FAILURE);
+		}
+	}
+}
+
+#define TICK 500000
+static bool wait_for_scan(const char *msg, char *p)
+{
+	int full_scans;
+	int timeout = 6; /* 3 seconds */
+
+	/* Sanity check */
+	if (check_huge(p)) {
+		printf("Unexpected huge page\n");
+		exit(EXIT_FAILURE);
+	}
+
+	madvise(p, hpage_pmd_size, MADV_HUGEPAGE);
+
+	/* Wait until the second full_scan completed */
+	full_scans = read_num("khugepaged/full_scans") + 2;
+
+	printf("%s...", msg);
+	while (timeout--) {
+		if (check_huge(p))
+			break;
+		if (read_num("khugepaged/full_scans") >= full_scans)
+			break;
+		printf(".");
+		usleep(TICK);
+	}
+
+	madvise(p, hpage_pmd_size, MADV_NOHUGEPAGE);
+
+	return !timeout;
+}
+
+static void alloc_at_fault(void)
+{
+	struct settings settings = default_settings;
+	char *p;
+
+	settings.thp_enabled = THP_ALWAYS;
+	write_settings(&settings);
+
+	p = alloc_mapping();
+	*p = 1;
+	printf("Allocate huge page on fault...");
+	if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+
+	write_settings(&default_settings);
+
+	madvise(p, page_size, MADV_DONTNEED);
+	printf("Split huge PMD on MADV_DONTNEED...");
+	if (!check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_full(void)
+{
+	void *p;
+
+	p = alloc_mapping();
+	fill_memory(p, 0, hpage_pmd_size);
+	if (wait_for_scan("Collapse fully populated PTE table", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, hpage_pmd_size);
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_empty(void)
+{
+	void *p;
+
+	p = alloc_mapping();
+	if (wait_for_scan("Do not collapse empty PTE table", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		fail("Fail");
+	else
+		success("OK");
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_single_pte_entry(void)
+{
+	void *p;
+
+	p = alloc_mapping();
+	fill_memory(p, 0, page_size);
+	if (wait_for_scan("Collapse PTE table with single PTE entry present", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, page_size);
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_max_ptes_none(void)
+{
+	int max_ptes_none = hpage_pmd_nr / 2;
+	struct settings settings = default_settings;
+	void *p;
+
+	settings.khugepaged.max_ptes_none = max_ptes_none;
+	write_settings(&settings);
+
+	p = alloc_mapping();
+
+	fill_memory(p, 0, (hpage_pmd_nr - max_ptes_none - 1) * page_size);
+	if (wait_for_scan("Do not collapse with max_ptes_none exceeded", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		fail("Fail");
+	else
+		success("OK");
+	validate_memory(p, 0, (hpage_pmd_nr - max_ptes_none - 1) * page_size);
+
+	fill_memory(p, 0, (hpage_pmd_nr - max_ptes_none) * page_size);
+	if (wait_for_scan("Collapse with max_ptes_none PTEs empty", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, (hpage_pmd_nr - max_ptes_none) * page_size);
+
+	munmap(p, hpage_pmd_size);
+	write_settings(&default_settings);
+}
+
+static void collapse_swapin_single_pte(void)
+{
+	void *p;
+	p = alloc_mapping();
+	fill_memory(p, 0, hpage_pmd_size);
+
+	printf("Swapout one page...");
+	if (madvise(p, page_size, MADV_PAGEOUT)) {
+		perror("madvise(MADV_PAGEOUT)");
+		exit(EXIT_FAILURE);
+	}
+	if (check_swap(p, page_size)) {
+		success("OK");
+	} else {
+		fail("Fail");
+		goto out;
+	}
+
+	if (wait_for_scan("Collapse with swapping in single PTE entry", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, hpage_pmd_size);
+out:
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_max_ptes_swap(void)
+{
+	int max_ptes_swap = read_num("khugepaged/max_ptes_swap");
+	void *p;
+
+	p = alloc_mapping();
+
+	fill_memory(p, 0, hpage_pmd_size);
+	printf("Swapout %d of %d pages...", max_ptes_swap + 1, hpage_pmd_nr);
+	if (madvise(p, (max_ptes_swap + 1) * page_size, MADV_PAGEOUT)) {
+		perror("madvise(MADV_PAGEOUT)");
+		exit(EXIT_FAILURE);
+	}
+	if (check_swap(p, (max_ptes_swap + 1) * page_size)) {
+		success("OK");
+	} else {
+		fail("Fail");
+		goto out;
+	}
+
+	if (wait_for_scan("Do not collapse with max_ptes_swap exceeded", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		fail("Fail");
+	else
+		success("OK");
+	validate_memory(p, 0, hpage_pmd_size);
+
+	fill_memory(p, 0, hpage_pmd_size);
+	printf("Swapout %d of %d pages...", max_ptes_swap, hpage_pmd_nr);
+	if (madvise(p, max_ptes_swap * page_size, MADV_PAGEOUT)) {
+		perror("madvise(MADV_PAGEOUT)");
+		exit(EXIT_FAILURE);
+	}
+	if (check_swap(p, max_ptes_swap * page_size)) {
+		success("OK");
+	} else {
+		fail("Fail");
+		goto out;
+	}
+
+	if (wait_for_scan("Collapse with max_ptes_swap pages swapped out", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, hpage_pmd_size);
+out:
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_single_pte_entry_compound(void)
+{
+	void *p;
+
+	p = alloc_mapping();
+
+	printf("Allocate huge page...");
+	madvise(p, hpage_pmd_size, MADV_HUGEPAGE);
+	fill_memory(p, 0, hpage_pmd_size);
+	if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	madvise(p, hpage_pmd_size, MADV_NOHUGEPAGE);
+
+	printf("Split huge page leaving single PTE mapping compound page...");
+	madvise(p + page_size, hpage_pmd_size - page_size, MADV_DONTNEED);
+	if (!check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+
+	if (wait_for_scan("Collapse PTE table with single PTE mapping compound page", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, page_size);
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_full_of_compound(void)
+{
+	void *p;
+
+	p = alloc_mapping();
+
+	printf("Allocate huge page...");
+	madvise(p, hpage_pmd_size, MADV_HUGEPAGE);
+	fill_memory(p, 0, hpage_pmd_size);
+	if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+
+	printf("Split huge page leaving single PTE page table full of compound pages...");
+	madvise(p, page_size, MADV_NOHUGEPAGE);
+	madvise(p, hpage_pmd_size, MADV_NOHUGEPAGE);
+	if (!check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+
+	if (wait_for_scan("Collapse PTE table full of compound pages", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, hpage_pmd_size);
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_compound_extreme(void)
+{
+	void *p;
+	int i;
+
+	p = alloc_mapping();
+	for (i = 0; i < hpage_pmd_nr; i++) {
+		printf("\rConstruct PTE page table full of different PTE-mapped compound pages %3d/%d...",
+				i + 1, hpage_pmd_nr);
+
+		madvise(BASE_ADDR, hpage_pmd_size, MADV_HUGEPAGE);
+		fill_memory(BASE_ADDR, 0, hpage_pmd_size);
+		if (!check_huge(BASE_ADDR)) {
+			printf("Failed to allocate huge page\n");
+			exit(EXIT_FAILURE);
+		}
+		madvise(BASE_ADDR, hpage_pmd_size, MADV_NOHUGEPAGE);
+
+		p = mremap(BASE_ADDR - i * page_size,
+				i * page_size + hpage_pmd_size,
+				(i + 1) * page_size,
+				MREMAP_MAYMOVE | MREMAP_FIXED,
+				BASE_ADDR + 2 * hpage_pmd_size);
+		if (p == MAP_FAILED) {
+			perror("mremap+unmap");
+			exit(EXIT_FAILURE);
+		}
+
+		p = mremap(BASE_ADDR + 2 * hpage_pmd_size,
+				(i + 1) * page_size,
+				(i + 1) * page_size + hpage_pmd_size,
+				MREMAP_MAYMOVE | MREMAP_FIXED,
+				BASE_ADDR - (i + 1) * page_size);
+		if (p == MAP_FAILED) {
+			perror("mremap+alloc");
+			exit(EXIT_FAILURE);
+		}
+	}
+
+	munmap(BASE_ADDR, hpage_pmd_size);
+	fill_memory(p, 0, hpage_pmd_size);
+	if (!check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+
+	if (wait_for_scan("Collapse PTE table full of different compound pages", p))
+		fail("Timeout");
+	else if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+
+	validate_memory(p, 0, hpage_pmd_size);
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_fork(void)
+{
+	int wstatus;
+	void *p;
+
+	p = alloc_mapping();
+
+	printf("Allocate small page...");
+	fill_memory(p, 0, page_size);
+	if (!check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+
+	printf("Share small page over fork()...");
+	if (!fork()) {
+		/* Do not touch settings on child exit */
+		skip_settings_restore = true;
+		exit_status = 0;
+
+		if (!check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+
+		fill_memory(p, page_size, 2 * page_size);
+
+		if (wait_for_scan("Collapse PTE table with single page shared with parent process", p))
+			fail("Timeout");
+		else if (check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+
+		validate_memory(p, 0, page_size);
+		munmap(p, hpage_pmd_size);
+		exit(exit_status);
+	}
+
+	wait(&wstatus);
+	exit_status += WEXITSTATUS(wstatus);
+
+	printf("Check if parent still has small page...");
+	if (!check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, page_size);
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_fork_compound(void)
+{
+	int wstatus;
+	void *p;
+
+	p = alloc_mapping();
+
+	printf("Allocate huge page...");
+	madvise(p, hpage_pmd_size, MADV_HUGEPAGE);
+	fill_memory(p, 0, hpage_pmd_size);
+	if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+
+	printf("Share huge page over fork()...");
+	if (!fork()) {
+		/* Do not touch settings on child exit */
+		skip_settings_restore = true;
+		exit_status = 0;
+
+		if (check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+
+		printf("Split huge page PMD in child process...");
+		madvise(p, page_size, MADV_NOHUGEPAGE);
+		madvise(p, hpage_pmd_size, MADV_NOHUGEPAGE);
+		if (!check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+		fill_memory(p, 0, page_size);
+
+		write_num("khugepaged/max_ptes_shared", hpage_pmd_nr - 1);
+		if (wait_for_scan("Collapse PTE table full of compound pages in child", p))
+			fail("Timeout");
+		else if (check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+		write_num("khugepaged/max_ptes_shared",
+				default_settings.khugepaged.max_ptes_shared);
+
+		validate_memory(p, 0, hpage_pmd_size);
+		munmap(p, hpage_pmd_size);
+		exit(exit_status);
+	}
+
+	wait(&wstatus);
+	exit_status += WEXITSTATUS(wstatus);
+
+	printf("Check if parent still has huge page...");
+	if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, hpage_pmd_size);
+	munmap(p, hpage_pmd_size);
+}
+
+static void collapse_max_ptes_shared()
+{
+	int max_ptes_shared = read_num("khugepaged/max_ptes_shared");
+	int wstatus;
+	void *p;
+
+	p = alloc_mapping();
+
+	printf("Allocate huge page...");
+	madvise(p, hpage_pmd_size, MADV_HUGEPAGE);
+	fill_memory(p, 0, hpage_pmd_size);
+	if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+
+	printf("Share huge page over fork()...");
+	if (!fork()) {
+		/* Do not touch settings on child exit */
+		skip_settings_restore = true;
+		exit_status = 0;
+
+		if (check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+
+		printf("Trigger CoW on page %d of %d...",
+				hpage_pmd_nr - max_ptes_shared - 1, hpage_pmd_nr);
+		fill_memory(p, 0, (hpage_pmd_nr - max_ptes_shared - 1) * page_size);
+		if (!check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+
+		if (wait_for_scan("Do not collapse with max_ptes_shared exceeded", p))
+			fail("Timeout");
+		else if (!check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+
+		printf("Trigger CoW on page %d of %d...",
+				hpage_pmd_nr - max_ptes_shared, hpage_pmd_nr);
+		fill_memory(p, 0, (hpage_pmd_nr - max_ptes_shared) * page_size);
+		if (!check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+
+
+		if (wait_for_scan("Collapse with max_ptes_shared PTEs shared", p))
+			fail("Timeout");
+		else if (check_huge(p))
+			success("OK");
+		else
+			fail("Fail");
+
+		validate_memory(p, 0, hpage_pmd_size);
+		munmap(p, hpage_pmd_size);
+		exit(exit_status);
+	}
+
+	wait(&wstatus);
+	exit_status += WEXITSTATUS(wstatus);
+
+	printf("Check if parent still has huge page...");
+	if (check_huge(p))
+		success("OK");
+	else
+		fail("Fail");
+	validate_memory(p, 0, hpage_pmd_size);
+	munmap(p, hpage_pmd_size);
+}
+
+int main(void)
+{
+	setbuf(stdout, NULL);
+
+	page_size = getpagesize();
+	hpage_pmd_size = read_num("hpage_pmd_size");
+	hpage_pmd_nr = hpage_pmd_size / page_size;
+
+	default_settings.khugepaged.max_ptes_none = hpage_pmd_nr - 1;
+	default_settings.khugepaged.max_ptes_swap = hpage_pmd_nr / 8;
+	default_settings.khugepaged.max_ptes_shared = hpage_pmd_nr / 2;
+	default_settings.khugepaged.pages_to_scan = hpage_pmd_nr * 8;
+
+	save_settings();
+	adjust_settings();
+
+	alloc_at_fault();
+	collapse_full();
+	collapse_empty();
+	collapse_single_pte_entry();
+	collapse_max_ptes_none();
+	collapse_swapin_single_pte();
+	collapse_max_ptes_swap();
+	collapse_single_pte_entry_compound();
+	collapse_full_of_compound();
+	collapse_compound_extreme();
+	collapse_fork();
+	collapse_fork_compound();
+	collapse_max_ptes_shared();
+
+	restore_settings(0);
+}
diff --git a/tools/testing/selftests/vm/mremap_dontunmap.c b/tools/testing/selftests/vm/mremap_dontunmap.c
index ee06cb0b9efb..3a7b5ef0b0c6 100644
--- a/tools/testing/selftests/vm/mremap_dontunmap.c
+++ b/tools/testing/selftests/vm/mremap_dontunmap.c
@@ -11,7 +11,6 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#include <stdlib.h>
 #include <unistd.h>
 
 #include "../kselftest.h"
diff --git a/tools/testing/selftests/vm/pkey-helpers.h b/tools/testing/selftests/vm/pkey-helpers.h
new file mode 100644
index 000000000000..622a85848f61
--- /dev/null
+++ b/tools/testing/selftests/vm/pkey-helpers.h
@@ -0,0 +1,225 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _PKEYS_HELPER_H
+#define _PKEYS_HELPER_H
+#define _GNU_SOURCE
+#include <string.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <signal.h>
+#include <assert.h>
+#include <stdlib.h>
+#include <ucontext.h>
+#include <sys/mman.h>
+
+/* Define some kernel-like types */
+#define  u8 __u8
+#define u16 __u16
+#define u32 __u32
+#define u64 __u64
+
+#define PTR_ERR_ENOTSUP ((void *)-ENOTSUP)
+
+#ifndef DEBUG_LEVEL
+#define DEBUG_LEVEL 0
+#endif
+#define DPRINT_IN_SIGNAL_BUF_SIZE 4096
+extern int dprint_in_signal;
+extern char dprint_in_signal_buffer[DPRINT_IN_SIGNAL_BUF_SIZE];
+
+extern int test_nr;
+extern int iteration_nr;
+
+#ifdef __GNUC__
+__attribute__((format(printf, 1, 2)))
+#endif
+static inline void sigsafe_printf(const char *format, ...)
+{
+	va_list ap;
+
+	if (!dprint_in_signal) {
+		va_start(ap, format);
+		vprintf(format, ap);
+		va_end(ap);
+	} else {
+		int ret;
+		/*
+		 * No printf() functions are signal-safe.
+		 * They deadlock easily. Write the format
+		 * string to get some output, even if
+		 * incomplete.
+		 */
+		ret = write(1, format, strlen(format));
+		if (ret < 0)
+			exit(1);
+	}
+}
+#define dprintf_level(level, args...) do {	\
+	if (level <= DEBUG_LEVEL)		\
+		sigsafe_printf(args);		\
+} while (0)
+#define dprintf0(args...) dprintf_level(0, args)
+#define dprintf1(args...) dprintf_level(1, args)
+#define dprintf2(args...) dprintf_level(2, args)
+#define dprintf3(args...) dprintf_level(3, args)
+#define dprintf4(args...) dprintf_level(4, args)
+
+extern void abort_hooks(void);
+#define pkey_assert(condition) do {		\
+	if (!(condition)) {			\
+		dprintf0("assert() at %s::%d test_nr: %d iteration: %d\n", \
+				__FILE__, __LINE__,	\
+				test_nr, iteration_nr);	\
+		dprintf0("errno at assert: %d", errno);	\
+		abort_hooks();			\
+		exit(__LINE__);			\
+	}					\
+} while (0)
+
+__attribute__((noinline)) int read_ptr(int *ptr);
+void expected_pkey_fault(int pkey);
+int sys_pkey_alloc(unsigned long flags, unsigned long init_val);
+int sys_pkey_free(unsigned long pkey);
+int mprotect_pkey(void *ptr, size_t size, unsigned long orig_prot,
+		unsigned long pkey);
+void record_pkey_malloc(void *ptr, long size, int prot);
+
+#if defined(__i386__) || defined(__x86_64__) /* arch */
+#include "pkey-x86.h"
+#elif defined(__powerpc64__) /* arch */
+#include "pkey-powerpc.h"
+#else /* arch */
+#error Architecture not supported
+#endif /* arch */
+
+#define PKEY_MASK	(PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE)
+
+static inline u64 set_pkey_bits(u64 reg, int pkey, u64 flags)
+{
+	u32 shift = pkey_bit_position(pkey);
+	/* mask out bits from pkey in old value */
+	reg &= ~((u64)PKEY_MASK << shift);
+	/* OR in new bits for pkey */
+	reg |= (flags & PKEY_MASK) << shift;
+	return reg;
+}
+
+static inline u64 get_pkey_bits(u64 reg, int pkey)
+{
+	u32 shift = pkey_bit_position(pkey);
+	/*
+	 * shift down the relevant bits to the lowest two, then
+	 * mask off all the other higher bits
+	 */
+	return ((reg >> shift) & PKEY_MASK);
+}
+
+extern u64 shadow_pkey_reg;
+
+static inline u64 _read_pkey_reg(int line)
+{
+	u64 pkey_reg = __read_pkey_reg();
+
+	dprintf4("read_pkey_reg(line=%d) pkey_reg: %016llx"
+			" shadow: %016llx\n",
+			line, pkey_reg, shadow_pkey_reg);
+	assert(pkey_reg == shadow_pkey_reg);
+
+	return pkey_reg;
+}
+
+#define read_pkey_reg() _read_pkey_reg(__LINE__)
+
+static inline void write_pkey_reg(u64 pkey_reg)
+{
+	dprintf4("%s() changing %016llx to %016llx\n", __func__,
+			__read_pkey_reg(), pkey_reg);
+	/* will do the shadow check for us: */
+	read_pkey_reg();
+	__write_pkey_reg(pkey_reg);
+	shadow_pkey_reg = pkey_reg;
+	dprintf4("%s(%016llx) pkey_reg: %016llx\n", __func__,
+			pkey_reg, __read_pkey_reg());
+}
+
+/*
+ * These are technically racy. since something could
+ * change PKEY register between the read and the write.
+ */
+static inline void __pkey_access_allow(int pkey, int do_allow)
+{
+	u64 pkey_reg = read_pkey_reg();
+	int bit = pkey * 2;
+
+	if (do_allow)
+		pkey_reg &= (1<<bit);
+	else
+		pkey_reg |= (1<<bit);
+
+	dprintf4("pkey_reg now: %016llx\n", read_pkey_reg());
+	write_pkey_reg(pkey_reg);
+}
+
+static inline void __pkey_write_allow(int pkey, int do_allow_write)
+{
+	u64 pkey_reg = read_pkey_reg();
+	int bit = pkey * 2 + 1;
+
+	if (do_allow_write)
+		pkey_reg &= (1<<bit);
+	else
+		pkey_reg |= (1<<bit);
+
+	write_pkey_reg(pkey_reg);
+	dprintf4("pkey_reg now: %016llx\n", read_pkey_reg());
+}
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
+#define ALIGN_UP(x, align_to)	(((x) + ((align_to)-1)) & ~((align_to)-1))
+#define ALIGN_DOWN(x, align_to) ((x) & ~((align_to)-1))
+#define ALIGN_PTR_UP(p, ptr_align_to)	\
+	((typeof(p))ALIGN_UP((unsigned long)(p), ptr_align_to))
+#define ALIGN_PTR_DOWN(p, ptr_align_to)	\
+	((typeof(p))ALIGN_DOWN((unsigned long)(p), ptr_align_to))
+#define __stringify_1(x...)     #x
+#define __stringify(x...)       __stringify_1(x)
+
+static inline u32 *siginfo_get_pkey_ptr(siginfo_t *si)
+{
+#ifdef si_pkey
+	return &si->si_pkey;
+#else
+	return (u32 *)(((u8 *)si) + si_pkey_offset);
+#endif
+}
+
+static inline int kernel_has_pkeys(void)
+{
+	/* try allocating a key and see if it succeeds */
+	int ret = sys_pkey_alloc(0, 0);
+	if (ret <= 0) {
+		return 0;
+	}
+	sys_pkey_free(ret);
+	return 1;
+}
+
+static inline int is_pkeys_supported(void)
+{
+	/* check if the cpu supports pkeys */
+	if (!cpu_has_pkeys()) {
+		dprintf1("SKIP: %s: no CPU support\n", __func__);
+		return 0;
+	}
+
+	/* check if the kernel supports pkeys */
+	if (!kernel_has_pkeys()) {
+		dprintf1("SKIP: %s: no kernel support\n", __func__);
+		return 0;
+	}
+
+	return 1;
+}
+
+#endif /* _PKEYS_HELPER_H */
diff --git a/tools/testing/selftests/vm/pkey-powerpc.h b/tools/testing/selftests/vm/pkey-powerpc.h
new file mode 100644
index 000000000000..3a761e51a587
--- /dev/null
+++ b/tools/testing/selftests/vm/pkey-powerpc.h
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _PKEYS_POWERPC_H
+#define _PKEYS_POWERPC_H
+
+#ifndef SYS_mprotect_key
+# define SYS_mprotect_key	386
+#endif
+#ifndef SYS_pkey_alloc
+# define SYS_pkey_alloc		384
+# define SYS_pkey_free		385
+#endif
+#define REG_IP_IDX		PT_NIP
+#define REG_TRAPNO		PT_TRAP
+#define gregs			gp_regs
+#define fpregs			fp_regs
+#define si_pkey_offset		0x20
+
+#ifdef PKEY_DISABLE_ACCESS
+#undef PKEY_DISABLE_ACCESS
+# define PKEY_DISABLE_ACCESS	0x3  /* disable read and write */
+#endif
+
+#ifdef PKEY_DISABLE_WRITE
+#undef PKEY_DISABLE_WRITE
+# define PKEY_DISABLE_WRITE	0x2
+#endif
+
+#define NR_PKEYS		32
+#define NR_RESERVED_PKEYS_4K	27 /* pkey-0, pkey-1, exec-only-pkey
+				      and 24 other keys that cannot be
+				      represented in the PTE */
+#define NR_RESERVED_PKEYS_64K_3KEYS	3 /* PowerNV and KVM: pkey-0,
+					     pkey-1 and exec-only key */
+#define NR_RESERVED_PKEYS_64K_4KEYS	4 /* PowerVM: pkey-0, pkey-1,
+					     pkey-31 and exec-only key */
+#define PKEY_BITS_PER_PKEY	2
+#define HPAGE_SIZE		(1UL << 24)
+#define PAGE_SIZE		sysconf(_SC_PAGESIZE)
+
+static inline u32 pkey_bit_position(int pkey)
+{
+	return (NR_PKEYS - pkey - 1) * PKEY_BITS_PER_PKEY;
+}
+
+static inline u64 __read_pkey_reg(void)
+{
+	u64 pkey_reg;
+
+	asm volatile("mfspr %0, 0xd" : "=r" (pkey_reg));
+
+	return pkey_reg;
+}
+
+static inline void __write_pkey_reg(u64 pkey_reg)
+{
+	u64 amr = pkey_reg;
+
+	dprintf4("%s() changing %016llx to %016llx\n",
+			 __func__, __read_pkey_reg(), pkey_reg);
+
+	asm volatile("mtspr 0xd, %0" : : "r" ((unsigned long)(amr)) : "memory");
+
+	dprintf4("%s() pkey register after changing %016llx to %016llx\n",
+			__func__, __read_pkey_reg(), pkey_reg);
+}
+
+static inline int cpu_has_pkeys(void)
+{
+	/* No simple way to determine this */
+	return 1;
+}
+
+static inline bool arch_is_powervm()
+{
+	struct stat buf;
+
+	if ((stat("/sys/firmware/devicetree/base/ibm,partition-name", &buf) == 0) &&
+	    (stat("/sys/firmware/devicetree/base/hmc-managed?", &buf) == 0) &&
+	    (stat("/sys/firmware/devicetree/base/chosen/qemu,graphic-width", &buf) == -1) )
+		return true;
+
+	return false;
+}
+
+static inline int get_arch_reserved_keys(void)
+{
+	if (sysconf(_SC_PAGESIZE) == 4096)
+		return NR_RESERVED_PKEYS_4K;
+	else
+		if (arch_is_powervm())
+			return NR_RESERVED_PKEYS_64K_4KEYS;
+		else
+			return NR_RESERVED_PKEYS_64K_3KEYS;
+}
+
+void expect_fault_on_read_execonly_key(void *p1, int pkey)
+{
+	/*
+	 * powerpc does not allow userspace to change permissions of exec-only
+	 * keys since those keys are not allocated by userspace. The signal
+	 * handler wont be able to reset the permissions, which means the code
+	 * will infinitely continue to segfault here.
+	 */
+	return;
+}
+
+/* 4-byte instructions * 16384 = 64K page */
+#define __page_o_noops() asm(".rept 16384 ; nop; .endr")
+
+void *malloc_pkey_with_mprotect_subpage(long size, int prot, u16 pkey)
+{
+	void *ptr;
+	int ret;
+
+	dprintf1("doing %s(size=%ld, prot=0x%x, pkey=%d)\n", __func__,
+			size, prot, pkey);
+	pkey_assert(pkey < NR_PKEYS);
+	ptr = mmap(NULL, size, prot, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
+	pkey_assert(ptr != (void *)-1);
+
+	ret = syscall(__NR_subpage_prot, ptr, size, NULL);
+	if (ret) {
+		perror("subpage_perm");
+		return PTR_ERR_ENOTSUP;
+	}
+
+	ret = mprotect_pkey((void *)ptr, PAGE_SIZE, prot, pkey);
+	pkey_assert(!ret);
+	record_pkey_malloc(ptr, size, prot);
+
+	dprintf1("%s() for pkey %d @ %p\n", __func__, pkey, ptr);
+	return ptr;
+}
+
+#endif /* _PKEYS_POWERPC_H */
diff --git a/tools/testing/selftests/vm/pkey-x86.h b/tools/testing/selftests/vm/pkey-x86.h
new file mode 100644
index 000000000000..3be20f5d5275
--- /dev/null
+++ b/tools/testing/selftests/vm/pkey-x86.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _PKEYS_X86_H
+#define _PKEYS_X86_H
+
+#ifdef __i386__
+
+#ifndef SYS_mprotect_key
+# define SYS_mprotect_key	380
+#endif
+
+#ifndef SYS_pkey_alloc
+# define SYS_pkey_alloc		381
+# define SYS_pkey_free		382
+#endif
+
+#define REG_IP_IDX		REG_EIP
+#define si_pkey_offset		0x14
+
+#else
+
+#ifndef SYS_mprotect_key
+# define SYS_mprotect_key	329
+#endif
+
+#ifndef SYS_pkey_alloc
+# define SYS_pkey_alloc		330
+# define SYS_pkey_free		331
+#endif
+
+#define REG_IP_IDX		REG_RIP
+#define si_pkey_offset		0x20
+
+#endif
+
+#ifndef PKEY_DISABLE_ACCESS
+# define PKEY_DISABLE_ACCESS	0x1
+#endif
+
+#ifndef PKEY_DISABLE_WRITE
+# define PKEY_DISABLE_WRITE	0x2
+#endif
+
+#define NR_PKEYS		16
+#define NR_RESERVED_PKEYS	2 /* pkey-0 and exec-only-pkey */
+#define PKEY_BITS_PER_PKEY	2
+#define HPAGE_SIZE		(1UL<<21)
+#define PAGE_SIZE		4096
+#define MB			(1<<20)
+
+static inline void __page_o_noops(void)
+{
+	/* 8-bytes of instruction * 512 bytes = 1 page */
+	asm(".rept 512 ; nopl 0x7eeeeeee(%eax) ; .endr");
+}
+
+static inline u64 __read_pkey_reg(void)
+{
+	unsigned int eax, edx;
+	unsigned int ecx = 0;
+	unsigned pkey_reg;
+
+	asm volatile(".byte 0x0f,0x01,0xee\n\t"
+		     : "=a" (eax), "=d" (edx)
+		     : "c" (ecx));
+	pkey_reg = eax;
+	return pkey_reg;
+}
+
+static inline void __write_pkey_reg(u64 pkey_reg)
+{
+	unsigned int eax = pkey_reg;
+	unsigned int ecx = 0;
+	unsigned int edx = 0;
+
+	dprintf4("%s() changing %016llx to %016llx\n", __func__,
+			__read_pkey_reg(), pkey_reg);
+	asm volatile(".byte 0x0f,0x01,0xef\n\t"
+		     : : "a" (eax), "c" (ecx), "d" (edx));
+	assert(pkey_reg == __read_pkey_reg());
+}
+
+static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
+		unsigned int *ecx, unsigned int *edx)
+{
+	/* ecx is often an input as well as an output. */
+	asm volatile(
+		"cpuid;"
+		: "=a" (*eax),
+		  "=b" (*ebx),
+		  "=c" (*ecx),
+		  "=d" (*edx)
+		: "0" (*eax), "2" (*ecx));
+}
+
+/* Intel-defined CPU features, CPUID level 0x00000007:0 (ecx) */
+#define X86_FEATURE_PKU        (1<<3) /* Protection Keys for Userspace */
+#define X86_FEATURE_OSPKE      (1<<4) /* OS Protection Keys Enable */
+
+static inline int cpu_has_pkeys(void)
+{
+	unsigned int eax;
+	unsigned int ebx;
+	unsigned int ecx;
+	unsigned int edx;
+
+	eax = 0x7;
+	ecx = 0x0;
+	__cpuid(&eax, &ebx, &ecx, &edx);
+
+	if (!(ecx & X86_FEATURE_PKU)) {
+		dprintf2("cpu does not have PKU\n");
+		return 0;
+	}
+	if (!(ecx & X86_FEATURE_OSPKE)) {
+		dprintf2("cpu does not have OSPKE\n");
+		return 0;
+	}
+	return 1;
+}
+
+static inline u32 pkey_bit_position(int pkey)
+{
+	return pkey * PKEY_BITS_PER_PKEY;
+}
+
+#define XSTATE_PKEY_BIT	(9)
+#define XSTATE_PKEY	0x200
+
+int pkey_reg_xstate_offset(void)
+{
+	unsigned int eax;
+	unsigned int ebx;
+	unsigned int ecx;
+	unsigned int edx;
+	int xstate_offset;
+	int xstate_size;
+	unsigned long XSTATE_CPUID = 0xd;
+	int leaf;
+
+	/* assume that XSTATE_PKEY is set in XCR0 */
+	leaf = XSTATE_PKEY_BIT;
+	{
+		eax = XSTATE_CPUID;
+		ecx = leaf;
+		__cpuid(&eax, &ebx, &ecx, &edx);
+
+		if (leaf == XSTATE_PKEY_BIT) {
+			xstate_offset = ebx;
+			xstate_size = eax;
+		}
+	}
+
+	if (xstate_size == 0) {
+		printf("could not find size/offset of PKEY in xsave state\n");
+		return 0;
+	}
+
+	return xstate_offset;
+}
+
+static inline int get_arch_reserved_keys(void)
+{
+	return NR_RESERVED_PKEYS;
+}
+
+void expect_fault_on_read_execonly_key(void *p1, int pkey)
+{
+	int ptr_contents;
+
+	ptr_contents = read_ptr(p1);
+	dprintf2("ptr (%p) contents@%d: %x\n", p1, __LINE__, ptr_contents);
+	expected_pkey_fault(pkey);
+}
+
+void *malloc_pkey_with_mprotect_subpage(long size, int prot, u16 pkey)
+{
+	return PTR_ERR_ENOTSUP;
+}
+
+#endif /* _PKEYS_X86_H */
diff --git a/tools/testing/selftests/vm/protection_keys.c b/tools/testing/selftests/vm/protection_keys.c
new file mode 100644
index 000000000000..fc19addcb5c8
--- /dev/null
+++ b/tools/testing/selftests/vm/protection_keys.c
@@ -0,0 +1,1580 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tests Memory Protection Keys (see Documentation/vm/protection-keys.txt)
+ *
+ * There are examples in here of:
+ *  * how to set protection keys on memory
+ *  * how to set/clear bits in pkey registers (the rights register)
+ *  * how to handle SEGV_PKUERR signals and extract pkey-relevant
+ *    information from the siginfo
+ *
+ * Things to add:
+ *	make sure KSM and KSM COW breaking works
+ *	prefault pages in at malloc, or not
+ *	protect MPX bounds tables with protection keys?
+ *	make sure VMA splitting/merging is working correctly
+ *	OOMs can destroy mm->mmap (see exit_mmap()), so make sure it is immune to pkeys
+ *	look for pkey "leaks" where it is still set on a VMA but "freed" back to the kernel
+ *	do a plain mprotect() to a mprotect_pkey() area and make sure the pkey sticks
+ *
+ * Compile like this:
+ *	gcc      -o protection_keys    -O2 -g -std=gnu99 -pthread -Wall protection_keys.c -lrt -ldl -lm
+ *	gcc -m32 -o protection_keys_32 -O2 -g -std=gnu99 -pthread -Wall protection_keys.c -lrt -ldl -lm
+ */
+#define _GNU_SOURCE
+#define __SANE_USERSPACE_TYPES__
+#include <errno.h>
+#include <linux/futex.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/syscall.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <signal.h>
+#include <assert.h>
+#include <stdlib.h>
+#include <ucontext.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/ptrace.h>
+#include <setjmp.h>
+
+#include "pkey-helpers.h"
+
+int iteration_nr = 1;
+int test_nr;
+
+u64 shadow_pkey_reg;
+int dprint_in_signal;
+char dprint_in_signal_buffer[DPRINT_IN_SIGNAL_BUF_SIZE];
+
+void cat_into_file(char *str, char *file)
+{
+	int fd = open(file, O_RDWR);
+	int ret;
+
+	dprintf2("%s(): writing '%s' to '%s'\n", __func__, str, file);
+	/*
+	 * these need to be raw because they are called under
+	 * pkey_assert()
+	 */
+	if (fd < 0) {
+		fprintf(stderr, "error opening '%s'\n", str);
+		perror("error: ");
+		exit(__LINE__);
+	}
+
+	ret = write(fd, str, strlen(str));
+	if (ret != strlen(str)) {
+		perror("write to file failed");
+		fprintf(stderr, "filename: '%s' str: '%s'\n", file, str);
+		exit(__LINE__);
+	}
+	close(fd);
+}
+
+#if CONTROL_TRACING > 0
+static int warned_tracing;
+int tracing_root_ok(void)
+{
+	if (geteuid() != 0) {
+		if (!warned_tracing)
+			fprintf(stderr, "WARNING: not run as root, "
+					"can not do tracing control\n");
+		warned_tracing = 1;
+		return 0;
+	}
+	return 1;
+}
+#endif
+
+void tracing_on(void)
+{
+#if CONTROL_TRACING > 0
+#define TRACEDIR "/sys/kernel/debug/tracing"
+	char pidstr[32];
+
+	if (!tracing_root_ok())
+		return;
+
+	sprintf(pidstr, "%d", getpid());
+	cat_into_file("0", TRACEDIR "/tracing_on");
+	cat_into_file("\n", TRACEDIR "/trace");
+	if (1) {
+		cat_into_file("function_graph", TRACEDIR "/current_tracer");
+		cat_into_file("1", TRACEDIR "/options/funcgraph-proc");
+	} else {
+		cat_into_file("nop", TRACEDIR "/current_tracer");
+	}
+	cat_into_file(pidstr, TRACEDIR "/set_ftrace_pid");
+	cat_into_file("1", TRACEDIR "/tracing_on");
+	dprintf1("enabled tracing\n");
+#endif
+}
+
+void tracing_off(void)
+{
+#if CONTROL_TRACING > 0
+	if (!tracing_root_ok())
+		return;
+	cat_into_file("0", "/sys/kernel/debug/tracing/tracing_on");
+#endif
+}
+
+void abort_hooks(void)
+{
+	fprintf(stderr, "running %s()...\n", __func__);
+	tracing_off();
+#ifdef SLEEP_ON_ABORT
+	sleep(SLEEP_ON_ABORT);
+#endif
+}
+
+/*
+ * This attempts to have roughly a page of instructions followed by a few
+ * instructions that do a write, and another page of instructions.  That
+ * way, we are pretty sure that the write is in the second page of
+ * instructions and has at least a page of padding behind it.
+ *
+ * *That* lets us be sure to madvise() away the write instruction, which
+ * will then fault, which makes sure that the fault code handles
+ * execute-only memory properly.
+ */
+#ifdef __powerpc64__
+/* This way, both 4K and 64K alignment are maintained */
+__attribute__((__aligned__(65536)))
+#else
+__attribute__((__aligned__(PAGE_SIZE)))
+#endif
+void lots_o_noops_around_write(int *write_to_me)
+{
+	dprintf3("running %s()\n", __func__);
+	__page_o_noops();
+	/* Assume this happens in the second page of instructions: */
+	*write_to_me = __LINE__;
+	/* pad out by another page: */
+	__page_o_noops();
+	dprintf3("%s() done\n", __func__);
+}
+
+void dump_mem(void *dumpme, int len_bytes)
+{
+	char *c = (void *)dumpme;
+	int i;
+
+	for (i = 0; i < len_bytes; i += sizeof(u64)) {
+		u64 *ptr = (u64 *)(c + i);
+		dprintf1("dump[%03d][@%p]: %016llx\n", i, ptr, *ptr);
+	}
+}
+
+static u32 hw_pkey_get(int pkey, unsigned long flags)
+{
+	u64 pkey_reg = __read_pkey_reg();
+
+	dprintf1("%s(pkey=%d, flags=%lx) = %x / %d\n",
+			__func__, pkey, flags, 0, 0);
+	dprintf2("%s() raw pkey_reg: %016llx\n", __func__, pkey_reg);
+
+	return (u32) get_pkey_bits(pkey_reg, pkey);
+}
+
+static int hw_pkey_set(int pkey, unsigned long rights, unsigned long flags)
+{
+	u32 mask = (PKEY_DISABLE_ACCESS|PKEY_DISABLE_WRITE);
+	u64 old_pkey_reg = __read_pkey_reg();
+	u64 new_pkey_reg;
+
+	/* make sure that 'rights' only contains the bits we expect: */
+	assert(!(rights & ~mask));
+
+	/* modify bits accordingly in old pkey_reg and assign it */
+	new_pkey_reg = set_pkey_bits(old_pkey_reg, pkey, rights);
+
+	__write_pkey_reg(new_pkey_reg);
+
+	dprintf3("%s(pkey=%d, rights=%lx, flags=%lx) = %x"
+		" pkey_reg now: %016llx old_pkey_reg: %016llx\n",
+		__func__, pkey, rights, flags, 0, __read_pkey_reg(),
+		old_pkey_reg);
+	return 0;
+}
+
+void pkey_disable_set(int pkey, int flags)
+{
+	unsigned long syscall_flags = 0;
+	int ret;
+	int pkey_rights;
+	u64 orig_pkey_reg = read_pkey_reg();
+
+	dprintf1("START->%s(%d, 0x%x)\n", __func__,
+		pkey, flags);
+	pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE));
+
+	pkey_rights = hw_pkey_get(pkey, syscall_flags);
+
+	dprintf1("%s(%d) hw_pkey_get(%d): %x\n", __func__,
+			pkey, pkey, pkey_rights);
+
+	pkey_assert(pkey_rights >= 0);
+
+	pkey_rights |= flags;
+
+	ret = hw_pkey_set(pkey, pkey_rights, syscall_flags);
+	assert(!ret);
+	/* pkey_reg and flags have the same format */
+	shadow_pkey_reg = set_pkey_bits(shadow_pkey_reg, pkey, pkey_rights);
+	dprintf1("%s(%d) shadow: 0x%016llx\n",
+		__func__, pkey, shadow_pkey_reg);
+
+	pkey_assert(ret >= 0);
+
+	pkey_rights = hw_pkey_get(pkey, syscall_flags);
+	dprintf1("%s(%d) hw_pkey_get(%d): %x\n", __func__,
+			pkey, pkey, pkey_rights);
+
+	dprintf1("%s(%d) pkey_reg: 0x%016llx\n",
+		__func__, pkey, read_pkey_reg());
+	if (flags)
+		pkey_assert(read_pkey_reg() >= orig_pkey_reg);
+	dprintf1("END<---%s(%d, 0x%x)\n", __func__,
+		pkey, flags);
+}
+
+void pkey_disable_clear(int pkey, int flags)
+{
+	unsigned long syscall_flags = 0;
+	int ret;
+	int pkey_rights = hw_pkey_get(pkey, syscall_flags);
+	u64 orig_pkey_reg = read_pkey_reg();
+
+	pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE));
+
+	dprintf1("%s(%d) hw_pkey_get(%d): %x\n", __func__,
+			pkey, pkey, pkey_rights);
+	pkey_assert(pkey_rights >= 0);
+
+	pkey_rights &= ~flags;
+
+	ret = hw_pkey_set(pkey, pkey_rights, 0);
+	shadow_pkey_reg = set_pkey_bits(shadow_pkey_reg, pkey, pkey_rights);
+	pkey_assert(ret >= 0);
+
+	pkey_rights = hw_pkey_get(pkey, syscall_flags);
+	dprintf1("%s(%d) hw_pkey_get(%d): %x\n", __func__,
+			pkey, pkey, pkey_rights);
+
+	dprintf1("%s(%d) pkey_reg: 0x%016llx\n", __func__,
+			pkey, read_pkey_reg());
+	if (flags)
+		assert(read_pkey_reg() <= orig_pkey_reg);
+}
+
+void pkey_write_allow(int pkey)
+{
+	pkey_disable_clear(pkey, PKEY_DISABLE_WRITE);
+}
+void pkey_write_deny(int pkey)
+{
+	pkey_disable_set(pkey, PKEY_DISABLE_WRITE);
+}
+void pkey_access_allow(int pkey)
+{
+	pkey_disable_clear(pkey, PKEY_DISABLE_ACCESS);
+}
+void pkey_access_deny(int pkey)
+{
+	pkey_disable_set(pkey, PKEY_DISABLE_ACCESS);
+}
+
+/* Failed address bound checks: */
+#ifndef SEGV_BNDERR
+# define SEGV_BNDERR		3
+#endif
+
+#ifndef SEGV_PKUERR
+# define SEGV_PKUERR		4
+#endif
+
+static char *si_code_str(int si_code)
+{
+	if (si_code == SEGV_MAPERR)
+		return "SEGV_MAPERR";
+	if (si_code == SEGV_ACCERR)
+		return "SEGV_ACCERR";
+	if (si_code == SEGV_BNDERR)
+		return "SEGV_BNDERR";
+	if (si_code == SEGV_PKUERR)
+		return "SEGV_PKUERR";
+	return "UNKNOWN";
+}
+
+int pkey_faults;
+int last_si_pkey = -1;
+void signal_handler(int signum, siginfo_t *si, void *vucontext)
+{
+	ucontext_t *uctxt = vucontext;
+	int trapno;
+	unsigned long ip;
+	char *fpregs;
+#if defined(__i386__) || defined(__x86_64__) /* arch */
+	u32 *pkey_reg_ptr;
+	int pkey_reg_offset;
+#endif /* arch */
+	u64 siginfo_pkey;
+	u32 *si_pkey_ptr;
+
+	dprint_in_signal = 1;
+	dprintf1(">>>>===============SIGSEGV============================\n");
+	dprintf1("%s()::%d, pkey_reg: 0x%016llx shadow: %016llx\n",
+			__func__, __LINE__,
+			__read_pkey_reg(), shadow_pkey_reg);
+
+	trapno = uctxt->uc_mcontext.gregs[REG_TRAPNO];
+	ip = uctxt->uc_mcontext.gregs[REG_IP_IDX];
+	fpregs = (char *) uctxt->uc_mcontext.fpregs;
+
+	dprintf2("%s() trapno: %d ip: 0x%016lx info->si_code: %s/%d\n",
+			__func__, trapno, ip, si_code_str(si->si_code),
+			si->si_code);
+
+#if defined(__i386__) || defined(__x86_64__) /* arch */
+#ifdef __i386__
+	/*
+	 * 32-bit has some extra padding so that userspace can tell whether
+	 * the XSTATE header is present in addition to the "legacy" FPU
+	 * state.  We just assume that it is here.
+	 */
+	fpregs += 0x70;
+#endif /* i386 */
+	pkey_reg_offset = pkey_reg_xstate_offset();
+	pkey_reg_ptr = (void *)(&fpregs[pkey_reg_offset]);
+
+	/*
+	 * If we got a PKEY fault, we *HAVE* to have at least one bit set in
+	 * here.
+	 */
+	dprintf1("pkey_reg_xstate_offset: %d\n", pkey_reg_xstate_offset());
+	if (DEBUG_LEVEL > 4)
+		dump_mem(pkey_reg_ptr - 128, 256);
+	pkey_assert(*pkey_reg_ptr);
+#endif /* arch */
+
+	dprintf1("siginfo: %p\n", si);
+	dprintf1(" fpregs: %p\n", fpregs);
+
+	if ((si->si_code == SEGV_MAPERR) ||
+	    (si->si_code == SEGV_ACCERR) ||
+	    (si->si_code == SEGV_BNDERR)) {
+		printf("non-PK si_code, exiting...\n");
+		exit(4);
+	}
+
+	si_pkey_ptr = siginfo_get_pkey_ptr(si);
+	dprintf1("si_pkey_ptr: %p\n", si_pkey_ptr);
+	dump_mem((u8 *)si_pkey_ptr - 8, 24);
+	siginfo_pkey = *si_pkey_ptr;
+	pkey_assert(siginfo_pkey < NR_PKEYS);
+	last_si_pkey = siginfo_pkey;
+
+	/*
+	 * need __read_pkey_reg() version so we do not do shadow_pkey_reg
+	 * checking
+	 */
+	dprintf1("signal pkey_reg from  pkey_reg: %016llx\n",
+			__read_pkey_reg());
+	dprintf1("pkey from siginfo: %016llx\n", siginfo_pkey);
+#if defined(__i386__) || defined(__x86_64__) /* arch */
+	dprintf1("signal pkey_reg from xsave: %08x\n", *pkey_reg_ptr);
+	*(u64 *)pkey_reg_ptr = 0x00000000;
+	dprintf1("WARNING: set PKEY_REG=0 to allow faulting instruction to continue\n");
+#elif defined(__powerpc64__) /* arch */
+	/* restore access and let the faulting instruction continue */
+	pkey_access_allow(siginfo_pkey);
+#endif /* arch */
+	pkey_faults++;
+	dprintf1("<<<<==================================================\n");
+	dprint_in_signal = 0;
+}
+
+int wait_all_children(void)
+{
+	int status;
+	return waitpid(-1, &status, 0);
+}
+
+void sig_chld(int x)
+{
+	dprint_in_signal = 1;
+	dprintf2("[%d] SIGCHLD: %d\n", getpid(), x);
+	dprint_in_signal = 0;
+}
+
+void setup_sigsegv_handler(void)
+{
+	int r, rs;
+	struct sigaction newact;
+	struct sigaction oldact;
+
+	/* #PF is mapped to sigsegv */
+	int signum  = SIGSEGV;
+
+	newact.sa_handler = 0;
+	newact.sa_sigaction = signal_handler;
+
+	/*sigset_t - signals to block while in the handler */
+	/* get the old signal mask. */
+	rs = sigprocmask(SIG_SETMASK, 0, &newact.sa_mask);
+	pkey_assert(rs == 0);
+
+	/* call sa_sigaction, not sa_handler*/
+	newact.sa_flags = SA_SIGINFO;
+
+	newact.sa_restorer = 0;  /* void(*)(), obsolete */
+	r = sigaction(signum, &newact, &oldact);
+	r = sigaction(SIGALRM, &newact, &oldact);
+	pkey_assert(r == 0);
+}
+
+void setup_handlers(void)
+{
+	signal(SIGCHLD, &sig_chld);
+	setup_sigsegv_handler();
+}
+
+pid_t fork_lazy_child(void)
+{
+	pid_t forkret;
+
+	forkret = fork();
+	pkey_assert(forkret >= 0);
+	dprintf3("[%d] fork() ret: %d\n", getpid(), forkret);
+
+	if (!forkret) {
+		/* in the child */
+		while (1) {
+			dprintf1("child sleeping...\n");
+			sleep(30);
+		}
+	}
+	return forkret;
+}
+
+int sys_mprotect_pkey(void *ptr, size_t size, unsigned long orig_prot,
+		unsigned long pkey)
+{
+	int sret;
+
+	dprintf2("%s(0x%p, %zx, prot=%lx, pkey=%lx)\n", __func__,
+			ptr, size, orig_prot, pkey);
+
+	errno = 0;
+	sret = syscall(SYS_mprotect_key, ptr, size, orig_prot, pkey);
+	if (errno) {
+		dprintf2("SYS_mprotect_key sret: %d\n", sret);
+		dprintf2("SYS_mprotect_key prot: 0x%lx\n", orig_prot);
+		dprintf2("SYS_mprotect_key failed, errno: %d\n", errno);
+		if (DEBUG_LEVEL >= 2)
+			perror("SYS_mprotect_pkey");
+	}
+	return sret;
+}
+
+int sys_pkey_alloc(unsigned long flags, unsigned long init_val)
+{
+	int ret = syscall(SYS_pkey_alloc, flags, init_val);
+	dprintf1("%s(flags=%lx, init_val=%lx) syscall ret: %d errno: %d\n",
+			__func__, flags, init_val, ret, errno);
+	return ret;
+}
+
+int alloc_pkey(void)
+{
+	int ret;
+	unsigned long init_val = 0x0;
+
+	dprintf1("%s()::%d, pkey_reg: 0x%016llx shadow: %016llx\n",
+			__func__, __LINE__, __read_pkey_reg(), shadow_pkey_reg);
+	ret = sys_pkey_alloc(0, init_val);
+	/*
+	 * pkey_alloc() sets PKEY register, so we need to reflect it in
+	 * shadow_pkey_reg:
+	 */
+	dprintf4("%s()::%d, ret: %d pkey_reg: 0x%016llx"
+			" shadow: 0x%016llx\n",
+			__func__, __LINE__, ret, __read_pkey_reg(),
+			shadow_pkey_reg);
+	if (ret) {
+		/* clear both the bits: */
+		shadow_pkey_reg = set_pkey_bits(shadow_pkey_reg, ret,
+						~PKEY_MASK);
+		dprintf4("%s()::%d, ret: %d pkey_reg: 0x%016llx"
+				" shadow: 0x%016llx\n",
+				__func__,
+				__LINE__, ret, __read_pkey_reg(),
+				shadow_pkey_reg);
+		/*
+		 * move the new state in from init_val
+		 * (remember, we cheated and init_val == pkey_reg format)
+		 */
+		shadow_pkey_reg = set_pkey_bits(shadow_pkey_reg, ret,
+						init_val);
+	}
+	dprintf4("%s()::%d, ret: %d pkey_reg: 0x%016llx"
+			" shadow: 0x%016llx\n",
+			__func__, __LINE__, ret, __read_pkey_reg(),
+			shadow_pkey_reg);
+	dprintf1("%s()::%d errno: %d\n", __func__, __LINE__, errno);
+	/* for shadow checking: */
+	read_pkey_reg();
+	dprintf4("%s()::%d, ret: %d pkey_reg: 0x%016llx"
+		 " shadow: 0x%016llx\n",
+		__func__, __LINE__, ret, __read_pkey_reg(),
+		shadow_pkey_reg);
+	return ret;
+}
+
+int sys_pkey_free(unsigned long pkey)
+{
+	int ret = syscall(SYS_pkey_free, pkey);
+	dprintf1("%s(pkey=%ld) syscall ret: %d\n", __func__, pkey, ret);
+	return ret;
+}
+
+/*
+ * I had a bug where pkey bits could be set by mprotect() but
+ * not cleared.  This ensures we get lots of random bit sets
+ * and clears on the vma and pte pkey bits.
+ */
+int alloc_random_pkey(void)
+{
+	int max_nr_pkey_allocs;
+	int ret;
+	int i;
+	int alloced_pkeys[NR_PKEYS];
+	int nr_alloced = 0;
+	int random_index;
+	memset(alloced_pkeys, 0, sizeof(alloced_pkeys));
+	srand((unsigned int)time(NULL));
+
+	/* allocate every possible key and make a note of which ones we got */
+	max_nr_pkey_allocs = NR_PKEYS;
+	for (i = 0; i < max_nr_pkey_allocs; i++) {
+		int new_pkey = alloc_pkey();
+		if (new_pkey < 0)
+			break;
+		alloced_pkeys[nr_alloced++] = new_pkey;
+	}
+
+	pkey_assert(nr_alloced > 0);
+	/* select a random one out of the allocated ones */
+	random_index = rand() % nr_alloced;
+	ret = alloced_pkeys[random_index];
+	/* now zero it out so we don't free it next */
+	alloced_pkeys[random_index] = 0;
+
+	/* go through the allocated ones that we did not want and free them */
+	for (i = 0; i < nr_alloced; i++) {
+		int free_ret;
+		if (!alloced_pkeys[i])
+			continue;
+		free_ret = sys_pkey_free(alloced_pkeys[i]);
+		pkey_assert(!free_ret);
+	}
+	dprintf1("%s()::%d, ret: %d pkey_reg: 0x%016llx"
+			 " shadow: 0x%016llx\n", __func__,
+			__LINE__, ret, __read_pkey_reg(), shadow_pkey_reg);
+	return ret;
+}
+
+int mprotect_pkey(void *ptr, size_t size, unsigned long orig_prot,
+		unsigned long pkey)
+{
+	int nr_iterations = random() % 100;
+	int ret;
+
+	while (0) {
+		int rpkey = alloc_random_pkey();
+		ret = sys_mprotect_pkey(ptr, size, orig_prot, pkey);
+		dprintf1("sys_mprotect_pkey(%p, %zx, prot=0x%lx, pkey=%ld) ret: %d\n",
+				ptr, size, orig_prot, pkey, ret);
+		if (nr_iterations-- < 0)
+			break;
+
+		dprintf1("%s()::%d, ret: %d pkey_reg: 0x%016llx"
+			" shadow: 0x%016llx\n",
+			__func__, __LINE__, ret, __read_pkey_reg(),
+			shadow_pkey_reg);
+		sys_pkey_free(rpkey);
+		dprintf1("%s()::%d, ret: %d pkey_reg: 0x%016llx"
+			" shadow: 0x%016llx\n",
+			__func__, __LINE__, ret, __read_pkey_reg(),
+			shadow_pkey_reg);
+	}
+	pkey_assert(pkey < NR_PKEYS);
+
+	ret = sys_mprotect_pkey(ptr, size, orig_prot, pkey);
+	dprintf1("mprotect_pkey(%p, %zx, prot=0x%lx, pkey=%ld) ret: %d\n",
+			ptr, size, orig_prot, pkey, ret);
+	pkey_assert(!ret);
+	dprintf1("%s()::%d, ret: %d pkey_reg: 0x%016llx"
+			" shadow: 0x%016llx\n", __func__,
+			__LINE__, ret, __read_pkey_reg(), shadow_pkey_reg);
+	return ret;
+}
+
+struct pkey_malloc_record {
+	void *ptr;
+	long size;
+	int prot;
+};
+struct pkey_malloc_record *pkey_malloc_records;
+struct pkey_malloc_record *pkey_last_malloc_record;
+long nr_pkey_malloc_records;
+void record_pkey_malloc(void *ptr, long size, int prot)
+{
+	long i;
+	struct pkey_malloc_record *rec = NULL;
+
+	for (i = 0; i < nr_pkey_malloc_records; i++) {
+		rec = &pkey_malloc_records[i];
+		/* find a free record */
+		if (rec)
+			break;
+	}
+	if (!rec) {
+		/* every record is full */
+		size_t old_nr_records = nr_pkey_malloc_records;
+		size_t new_nr_records = (nr_pkey_malloc_records * 2 + 1);
+		size_t new_size = new_nr_records * sizeof(struct pkey_malloc_record);
+		dprintf2("new_nr_records: %zd\n", new_nr_records);
+		dprintf2("new_size: %zd\n", new_size);
+		pkey_malloc_records = realloc(pkey_malloc_records, new_size);
+		pkey_assert(pkey_malloc_records != NULL);
+		rec = &pkey_malloc_records[nr_pkey_malloc_records];
+		/*
+		 * realloc() does not initialize memory, so zero it from
+		 * the first new record all the way to the end.
+		 */
+		for (i = 0; i < new_nr_records - old_nr_records; i++)
+			memset(rec + i, 0, sizeof(*rec));
+	}
+	dprintf3("filling malloc record[%d/%p]: {%p, %ld}\n",
+		(int)(rec - pkey_malloc_records), rec, ptr, size);
+	rec->ptr = ptr;
+	rec->size = size;
+	rec->prot = prot;
+	pkey_last_malloc_record = rec;
+	nr_pkey_malloc_records++;
+}
+
+void free_pkey_malloc(void *ptr)
+{
+	long i;
+	int ret;
+	dprintf3("%s(%p)\n", __func__, ptr);
+	for (i = 0; i < nr_pkey_malloc_records; i++) {
+		struct pkey_malloc_record *rec = &pkey_malloc_records[i];
+		dprintf4("looking for ptr %p at record[%ld/%p]: {%p, %ld}\n",
+				ptr, i, rec, rec->ptr, rec->size);
+		if ((ptr <  rec->ptr) ||
+		    (ptr >= rec->ptr + rec->size))
+			continue;
+
+		dprintf3("found ptr %p at record[%ld/%p]: {%p, %ld}\n",
+				ptr, i, rec, rec->ptr, rec->size);
+		nr_pkey_malloc_records--;
+		ret = munmap(rec->ptr, rec->size);
+		dprintf3("munmap ret: %d\n", ret);
+		pkey_assert(!ret);
+		dprintf3("clearing rec->ptr, rec: %p\n", rec);
+		rec->ptr = NULL;
+		dprintf3("done clearing rec->ptr, rec: %p\n", rec);
+		return;
+	}
+	pkey_assert(false);
+}
+
+
+void *malloc_pkey_with_mprotect(long size, int prot, u16 pkey)
+{
+	void *ptr;
+	int ret;
+
+	read_pkey_reg();
+	dprintf1("doing %s(size=%ld, prot=0x%x, pkey=%d)\n", __func__,
+			size, prot, pkey);
+	pkey_assert(pkey < NR_PKEYS);
+	ptr = mmap(NULL, size, prot, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
+	pkey_assert(ptr != (void *)-1);
+	ret = mprotect_pkey((void *)ptr, PAGE_SIZE, prot, pkey);
+	pkey_assert(!ret);
+	record_pkey_malloc(ptr, size, prot);
+	read_pkey_reg();
+
+	dprintf1("%s() for pkey %d @ %p\n", __func__, pkey, ptr);
+	return ptr;
+}
+
+void *malloc_pkey_anon_huge(long size, int prot, u16 pkey)
+{
+	int ret;
+	void *ptr;
+
+	dprintf1("doing %s(size=%ld, prot=0x%x, pkey=%d)\n", __func__,
+			size, prot, pkey);
+	/*
+	 * Guarantee we can fit at least one huge page in the resulting
+	 * allocation by allocating space for 2:
+	 */
+	size = ALIGN_UP(size, HPAGE_SIZE * 2);
+	ptr = mmap(NULL, size, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
+	pkey_assert(ptr != (void *)-1);
+	record_pkey_malloc(ptr, size, prot);
+	mprotect_pkey(ptr, size, prot, pkey);
+
+	dprintf1("unaligned ptr: %p\n", ptr);
+	ptr = ALIGN_PTR_UP(ptr, HPAGE_SIZE);
+	dprintf1("  aligned ptr: %p\n", ptr);
+	ret = madvise(ptr, HPAGE_SIZE, MADV_HUGEPAGE);
+	dprintf1("MADV_HUGEPAGE ret: %d\n", ret);
+	ret = madvise(ptr, HPAGE_SIZE, MADV_WILLNEED);
+	dprintf1("MADV_WILLNEED ret: %d\n", ret);
+	memset(ptr, 0, HPAGE_SIZE);
+
+	dprintf1("mmap()'d thp for pkey %d @ %p\n", pkey, ptr);
+	return ptr;
+}
+
+int hugetlb_setup_ok;
+#define SYSFS_FMT_NR_HUGE_PAGES "/sys/kernel/mm/hugepages/hugepages-%ldkB/nr_hugepages"
+#define GET_NR_HUGE_PAGES 10
+void setup_hugetlbfs(void)
+{
+	int err;
+	int fd;
+	char buf[256];
+	long hpagesz_kb;
+	long hpagesz_mb;
+
+	if (geteuid() != 0) {
+		fprintf(stderr, "WARNING: not run as root, can not do hugetlb test\n");
+		return;
+	}
+
+	cat_into_file(__stringify(GET_NR_HUGE_PAGES), "/proc/sys/vm/nr_hugepages");
+
+	/*
+	 * Now go make sure that we got the pages and that they
+	 * are PMD-level pages. Someone might have made PUD-level
+	 * pages the default.
+	 */
+	hpagesz_kb = HPAGE_SIZE / 1024;
+	hpagesz_mb = hpagesz_kb / 1024;
+	sprintf(buf, SYSFS_FMT_NR_HUGE_PAGES, hpagesz_kb);
+	fd = open(buf, O_RDONLY);
+	if (fd < 0) {
+		fprintf(stderr, "opening sysfs %ldM hugetlb config: %s\n",
+			hpagesz_mb, strerror(errno));
+		return;
+	}
+
+	/* -1 to guarantee leaving the trailing \0 */
+	err = read(fd, buf, sizeof(buf)-1);
+	close(fd);
+	if (err <= 0) {
+		fprintf(stderr, "reading sysfs %ldM hugetlb config: %s\n",
+			hpagesz_mb, strerror(errno));
+		return;
+	}
+
+	if (atoi(buf) != GET_NR_HUGE_PAGES) {
+		fprintf(stderr, "could not confirm %ldM pages, got: '%s' expected %d\n",
+			hpagesz_mb, buf, GET_NR_HUGE_PAGES);
+		return;
+	}
+
+	hugetlb_setup_ok = 1;
+}
+
+void *malloc_pkey_hugetlb(long size, int prot, u16 pkey)
+{
+	void *ptr;
+	int flags = MAP_ANONYMOUS|MAP_PRIVATE|MAP_HUGETLB;
+
+	if (!hugetlb_setup_ok)
+		return PTR_ERR_ENOTSUP;
+
+	dprintf1("doing %s(%ld, %x, %x)\n", __func__, size, prot, pkey);
+	size = ALIGN_UP(size, HPAGE_SIZE * 2);
+	pkey_assert(pkey < NR_PKEYS);
+	ptr = mmap(NULL, size, PROT_NONE, flags, -1, 0);
+	pkey_assert(ptr != (void *)-1);
+	mprotect_pkey(ptr, size, prot, pkey);
+
+	record_pkey_malloc(ptr, size, prot);
+
+	dprintf1("mmap()'d hugetlbfs for pkey %d @ %p\n", pkey, ptr);
+	return ptr;
+}
+
+void *malloc_pkey_mmap_dax(long size, int prot, u16 pkey)
+{
+	void *ptr;
+	int fd;
+
+	dprintf1("doing %s(size=%ld, prot=0x%x, pkey=%d)\n", __func__,
+			size, prot, pkey);
+	pkey_assert(pkey < NR_PKEYS);
+	fd = open("/dax/foo", O_RDWR);
+	pkey_assert(fd >= 0);
+
+	ptr = mmap(0, size, prot, MAP_SHARED, fd, 0);
+	pkey_assert(ptr != (void *)-1);
+
+	mprotect_pkey(ptr, size, prot, pkey);
+
+	record_pkey_malloc(ptr, size, prot);
+
+	dprintf1("mmap()'d for pkey %d @ %p\n", pkey, ptr);
+	close(fd);
+	return ptr;
+}
+
+void *(*pkey_malloc[])(long size, int prot, u16 pkey) = {
+
+	malloc_pkey_with_mprotect,
+	malloc_pkey_with_mprotect_subpage,
+	malloc_pkey_anon_huge,
+	malloc_pkey_hugetlb
+/* can not do direct with the pkey_mprotect() API:
+	malloc_pkey_mmap_direct,
+	malloc_pkey_mmap_dax,
+*/
+};
+
+void *malloc_pkey(long size, int prot, u16 pkey)
+{
+	void *ret;
+	static int malloc_type;
+	int nr_malloc_types = ARRAY_SIZE(pkey_malloc);
+
+	pkey_assert(pkey < NR_PKEYS);
+
+	while (1) {
+		pkey_assert(malloc_type < nr_malloc_types);
+
+		ret = pkey_malloc[malloc_type](size, prot, pkey);
+		pkey_assert(ret != (void *)-1);
+
+		malloc_type++;
+		if (malloc_type >= nr_malloc_types)
+			malloc_type = (random()%nr_malloc_types);
+
+		/* try again if the malloc_type we tried is unsupported */
+		if (ret == PTR_ERR_ENOTSUP)
+			continue;
+
+		break;
+	}
+
+	dprintf3("%s(%ld, prot=%x, pkey=%x) returning: %p\n", __func__,
+			size, prot, pkey, ret);
+	return ret;
+}
+
+int last_pkey_faults;
+#define UNKNOWN_PKEY -2
+void expected_pkey_fault(int pkey)
+{
+	dprintf2("%s(): last_pkey_faults: %d pkey_faults: %d\n",
+			__func__, last_pkey_faults, pkey_faults);
+	dprintf2("%s(%d): last_si_pkey: %d\n", __func__, pkey, last_si_pkey);
+	pkey_assert(last_pkey_faults + 1 == pkey_faults);
+
+       /*
+	* For exec-only memory, we do not know the pkey in
+	* advance, so skip this check.
+	*/
+	if (pkey != UNKNOWN_PKEY)
+		pkey_assert(last_si_pkey == pkey);
+
+#if defined(__i386__) || defined(__x86_64__) /* arch */
+	/*
+	 * The signal handler shold have cleared out PKEY register to let the
+	 * test program continue.  We now have to restore it.
+	 */
+	if (__read_pkey_reg() != 0)
+#else /* arch */
+	if (__read_pkey_reg() != shadow_pkey_reg)
+#endif /* arch */
+		pkey_assert(0);
+
+	__write_pkey_reg(shadow_pkey_reg);
+	dprintf1("%s() set pkey_reg=%016llx to restore state after signal "
+		       "nuked it\n", __func__, shadow_pkey_reg);
+	last_pkey_faults = pkey_faults;
+	last_si_pkey = -1;
+}
+
+#define do_not_expect_pkey_fault(msg)	do {			\
+	if (last_pkey_faults != pkey_faults)			\
+		dprintf0("unexpected PKey fault: %s\n", msg);	\
+	pkey_assert(last_pkey_faults == pkey_faults);		\
+} while (0)
+
+int test_fds[10] = { -1 };
+int nr_test_fds;
+void __save_test_fd(int fd)
+{
+	pkey_assert(fd >= 0);
+	pkey_assert(nr_test_fds < ARRAY_SIZE(test_fds));
+	test_fds[nr_test_fds] = fd;
+	nr_test_fds++;
+}
+
+int get_test_read_fd(void)
+{
+	int test_fd = open("/etc/passwd", O_RDONLY);
+	__save_test_fd(test_fd);
+	return test_fd;
+}
+
+void close_test_fds(void)
+{
+	int i;
+
+	for (i = 0; i < nr_test_fds; i++) {
+		if (test_fds[i] < 0)
+			continue;
+		close(test_fds[i]);
+		test_fds[i] = -1;
+	}
+	nr_test_fds = 0;
+}
+
+#define barrier() __asm__ __volatile__("": : :"memory")
+__attribute__((noinline)) int read_ptr(int *ptr)
+{
+	/*
+	 * Keep GCC from optimizing this away somehow
+	 */
+	barrier();
+	return *ptr;
+}
+
+void test_pkey_alloc_free_attach_pkey0(int *ptr, u16 pkey)
+{
+	int i, err;
+	int max_nr_pkey_allocs;
+	int alloced_pkeys[NR_PKEYS];
+	int nr_alloced = 0;
+	long size;
+
+	pkey_assert(pkey_last_malloc_record);
+	size = pkey_last_malloc_record->size;
+	/*
+	 * This is a bit of a hack.  But mprotect() requires
+	 * huge-page-aligned sizes when operating on hugetlbfs.
+	 * So, make sure that we use something that's a multiple
+	 * of a huge page when we can.
+	 */
+	if (size >= HPAGE_SIZE)
+		size = HPAGE_SIZE;
+
+	/* allocate every possible key and make sure key-0 never got allocated */
+	max_nr_pkey_allocs = NR_PKEYS;
+	for (i = 0; i < max_nr_pkey_allocs; i++) {
+		int new_pkey = alloc_pkey();
+		pkey_assert(new_pkey != 0);
+
+		if (new_pkey < 0)
+			break;
+		alloced_pkeys[nr_alloced++] = new_pkey;
+	}
+	/* free all the allocated keys */
+	for (i = 0; i < nr_alloced; i++) {
+		int free_ret;
+
+		if (!alloced_pkeys[i])
+			continue;
+		free_ret = sys_pkey_free(alloced_pkeys[i]);
+		pkey_assert(!free_ret);
+	}
+
+	/* attach key-0 in various modes */
+	err = sys_mprotect_pkey(ptr, size, PROT_READ, 0);
+	pkey_assert(!err);
+	err = sys_mprotect_pkey(ptr, size, PROT_WRITE, 0);
+	pkey_assert(!err);
+	err = sys_mprotect_pkey(ptr, size, PROT_EXEC, 0);
+	pkey_assert(!err);
+	err = sys_mprotect_pkey(ptr, size, PROT_READ|PROT_WRITE, 0);
+	pkey_assert(!err);
+	err = sys_mprotect_pkey(ptr, size, PROT_READ|PROT_WRITE|PROT_EXEC, 0);
+	pkey_assert(!err);
+}
+
+void test_read_of_write_disabled_region(int *ptr, u16 pkey)
+{
+	int ptr_contents;
+
+	dprintf1("disabling write access to PKEY[1], doing read\n");
+	pkey_write_deny(pkey);
+	ptr_contents = read_ptr(ptr);
+	dprintf1("*ptr: %d\n", ptr_contents);
+	dprintf1("\n");
+}
+void test_read_of_access_disabled_region(int *ptr, u16 pkey)
+{
+	int ptr_contents;
+
+	dprintf1("disabling access to PKEY[%02d], doing read @ %p\n", pkey, ptr);
+	read_pkey_reg();
+	pkey_access_deny(pkey);
+	ptr_contents = read_ptr(ptr);
+	dprintf1("*ptr: %d\n", ptr_contents);
+	expected_pkey_fault(pkey);
+}
+
+void test_read_of_access_disabled_region_with_page_already_mapped(int *ptr,
+		u16 pkey)
+{
+	int ptr_contents;
+
+	dprintf1("disabling access to PKEY[%02d], doing read @ %p\n",
+				pkey, ptr);
+	ptr_contents = read_ptr(ptr);
+	dprintf1("reading ptr before disabling the read : %d\n",
+			ptr_contents);
+	read_pkey_reg();
+	pkey_access_deny(pkey);
+	ptr_contents = read_ptr(ptr);
+	dprintf1("*ptr: %d\n", ptr_contents);
+	expected_pkey_fault(pkey);
+}
+
+void test_write_of_write_disabled_region_with_page_already_mapped(int *ptr,
+		u16 pkey)
+{
+	*ptr = __LINE__;
+	dprintf1("disabling write access; after accessing the page, "
+		"to PKEY[%02d], doing write\n", pkey);
+	pkey_write_deny(pkey);
+	*ptr = __LINE__;
+	expected_pkey_fault(pkey);
+}
+
+void test_write_of_write_disabled_region(int *ptr, u16 pkey)
+{
+	dprintf1("disabling write access to PKEY[%02d], doing write\n", pkey);
+	pkey_write_deny(pkey);
+	*ptr = __LINE__;
+	expected_pkey_fault(pkey);
+}
+void test_write_of_access_disabled_region(int *ptr, u16 pkey)
+{
+	dprintf1("disabling access to PKEY[%02d], doing write\n", pkey);
+	pkey_access_deny(pkey);
+	*ptr = __LINE__;
+	expected_pkey_fault(pkey);
+}
+
+void test_write_of_access_disabled_region_with_page_already_mapped(int *ptr,
+			u16 pkey)
+{
+	*ptr = __LINE__;
+	dprintf1("disabling access; after accessing the page, "
+		" to PKEY[%02d], doing write\n", pkey);
+	pkey_access_deny(pkey);
+	*ptr = __LINE__;
+	expected_pkey_fault(pkey);
+}
+
+void test_kernel_write_of_access_disabled_region(int *ptr, u16 pkey)
+{
+	int ret;
+	int test_fd = get_test_read_fd();
+
+	dprintf1("disabling access to PKEY[%02d], "
+		 "having kernel read() to buffer\n", pkey);
+	pkey_access_deny(pkey);
+	ret = read(test_fd, ptr, 1);
+	dprintf1("read ret: %d\n", ret);
+	pkey_assert(ret);
+}
+void test_kernel_write_of_write_disabled_region(int *ptr, u16 pkey)
+{
+	int ret;
+	int test_fd = get_test_read_fd();
+
+	pkey_write_deny(pkey);
+	ret = read(test_fd, ptr, 100);
+	dprintf1("read ret: %d\n", ret);
+	if (ret < 0 && (DEBUG_LEVEL > 0))
+		perror("verbose read result (OK for this to be bad)");
+	pkey_assert(ret);
+}
+
+void test_kernel_gup_of_access_disabled_region(int *ptr, u16 pkey)
+{
+	int pipe_ret, vmsplice_ret;
+	struct iovec iov;
+	int pipe_fds[2];
+
+	pipe_ret = pipe(pipe_fds);
+
+	pkey_assert(pipe_ret == 0);
+	dprintf1("disabling access to PKEY[%02d], "
+		 "having kernel vmsplice from buffer\n", pkey);
+	pkey_access_deny(pkey);
+	iov.iov_base = ptr;
+	iov.iov_len = PAGE_SIZE;
+	vmsplice_ret = vmsplice(pipe_fds[1], &iov, 1, SPLICE_F_GIFT);
+	dprintf1("vmsplice() ret: %d\n", vmsplice_ret);
+	pkey_assert(vmsplice_ret == -1);
+
+	close(pipe_fds[0]);
+	close(pipe_fds[1]);
+}
+
+void test_kernel_gup_write_to_write_disabled_region(int *ptr, u16 pkey)
+{
+	int ignored = 0xdada;
+	int futex_ret;
+	int some_int = __LINE__;
+
+	dprintf1("disabling write to PKEY[%02d], "
+		 "doing futex gunk in buffer\n", pkey);
+	*ptr = some_int;
+	pkey_write_deny(pkey);
+	futex_ret = syscall(SYS_futex, ptr, FUTEX_WAIT, some_int-1, NULL,
+			&ignored, ignored);
+	if (DEBUG_LEVEL > 0)
+		perror("futex");
+	dprintf1("futex() ret: %d\n", futex_ret);
+}
+
+/* Assumes that all pkeys other than 'pkey' are unallocated */
+void test_pkey_syscalls_on_non_allocated_pkey(int *ptr, u16 pkey)
+{
+	int err;
+	int i;
+
+	/* Note: 0 is the default pkey, so don't mess with it */
+	for (i = 1; i < NR_PKEYS; i++) {
+		if (pkey == i)
+			continue;
+
+		dprintf1("trying get/set/free to non-allocated pkey: %2d\n", i);
+		err = sys_pkey_free(i);
+		pkey_assert(err);
+
+		err = sys_pkey_free(i);
+		pkey_assert(err);
+
+		err = sys_mprotect_pkey(ptr, PAGE_SIZE, PROT_READ, i);
+		pkey_assert(err);
+	}
+}
+
+/* Assumes that all pkeys other than 'pkey' are unallocated */
+void test_pkey_syscalls_bad_args(int *ptr, u16 pkey)
+{
+	int err;
+	int bad_pkey = NR_PKEYS+99;
+
+	/* pass a known-invalid pkey in: */
+	err = sys_mprotect_pkey(ptr, PAGE_SIZE, PROT_READ, bad_pkey);
+	pkey_assert(err);
+}
+
+void become_child(void)
+{
+	pid_t forkret;
+
+	forkret = fork();
+	pkey_assert(forkret >= 0);
+	dprintf3("[%d] fork() ret: %d\n", getpid(), forkret);
+
+	if (!forkret) {
+		/* in the child */
+		return;
+	}
+	exit(0);
+}
+
+/* Assumes that all pkeys other than 'pkey' are unallocated */
+void test_pkey_alloc_exhaust(int *ptr, u16 pkey)
+{
+	int err;
+	int allocated_pkeys[NR_PKEYS] = {0};
+	int nr_allocated_pkeys = 0;
+	int i;
+
+	for (i = 0; i < NR_PKEYS*3; i++) {
+		int new_pkey;
+		dprintf1("%s() alloc loop: %d\n", __func__, i);
+		new_pkey = alloc_pkey();
+		dprintf4("%s()::%d, err: %d pkey_reg: 0x%016llx"
+				" shadow: 0x%016llx\n",
+				__func__, __LINE__, err, __read_pkey_reg(),
+				shadow_pkey_reg);
+		read_pkey_reg(); /* for shadow checking */
+		dprintf2("%s() errno: %d ENOSPC: %d\n", __func__, errno, ENOSPC);
+		if ((new_pkey == -1) && (errno == ENOSPC)) {
+			dprintf2("%s() failed to allocate pkey after %d tries\n",
+				__func__, nr_allocated_pkeys);
+		} else {
+			/*
+			 * Ensure the number of successes never
+			 * exceeds the number of keys supported
+			 * in the hardware.
+			 */
+			pkey_assert(nr_allocated_pkeys < NR_PKEYS);
+			allocated_pkeys[nr_allocated_pkeys++] = new_pkey;
+		}
+
+		/*
+		 * Make sure that allocation state is properly
+		 * preserved across fork().
+		 */
+		if (i == NR_PKEYS*2)
+			become_child();
+	}
+
+	dprintf3("%s()::%d\n", __func__, __LINE__);
+
+	/*
+	 * On x86:
+	 * There are 16 pkeys supported in hardware.  Three are
+	 * allocated by the time we get here:
+	 *   1. The default key (0)
+	 *   2. One possibly consumed by an execute-only mapping.
+	 *   3. One allocated by the test code and passed in via
+	 *      'pkey' to this function.
+	 * Ensure that we can allocate at least another 13 (16-3).
+	 *
+	 * On powerpc:
+	 * There are either 5, 28, 29 or 32 pkeys supported in
+	 * hardware depending on the page size (4K or 64K) and
+	 * platform (powernv or powervm). Four are allocated by
+	 * the time we get here. These include pkey-0, pkey-1,
+	 * exec-only pkey and the one allocated by the test code.
+	 * Ensure that we can allocate the remaining.
+	 */
+	pkey_assert(i >= (NR_PKEYS - get_arch_reserved_keys() - 1));
+
+	for (i = 0; i < nr_allocated_pkeys; i++) {
+		err = sys_pkey_free(allocated_pkeys[i]);
+		pkey_assert(!err);
+		read_pkey_reg(); /* for shadow checking */
+	}
+}
+
+/*
+ * pkey 0 is special.  It is allocated by default, so you do not
+ * have to call pkey_alloc() to use it first.  Make sure that it
+ * is usable.
+ */
+void test_mprotect_with_pkey_0(int *ptr, u16 pkey)
+{
+	long size;
+	int prot;
+
+	assert(pkey_last_malloc_record);
+	size = pkey_last_malloc_record->size;
+	/*
+	 * This is a bit of a hack.  But mprotect() requires
+	 * huge-page-aligned sizes when operating on hugetlbfs.
+	 * So, make sure that we use something that's a multiple
+	 * of a huge page when we can.
+	 */
+	if (size >= HPAGE_SIZE)
+		size = HPAGE_SIZE;
+	prot = pkey_last_malloc_record->prot;
+
+	/* Use pkey 0 */
+	mprotect_pkey(ptr, size, prot, 0);
+
+	/* Make sure that we can set it back to the original pkey. */
+	mprotect_pkey(ptr, size, prot, pkey);
+}
+
+void test_ptrace_of_child(int *ptr, u16 pkey)
+{
+	__attribute__((__unused__)) int peek_result;
+	pid_t child_pid;
+	void *ignored = 0;
+	long ret;
+	int status;
+	/*
+	 * This is the "control" for our little expermient.  Make sure
+	 * we can always access it when ptracing.
+	 */
+	int *plain_ptr_unaligned = malloc(HPAGE_SIZE);
+	int *plain_ptr = ALIGN_PTR_UP(plain_ptr_unaligned, PAGE_SIZE);
+
+	/*
+	 * Fork a child which is an exact copy of this process, of course.
+	 * That means we can do all of our tests via ptrace() and then plain
+	 * memory access and ensure they work differently.
+	 */
+	child_pid = fork_lazy_child();
+	dprintf1("[%d] child pid: %d\n", getpid(), child_pid);
+
+	ret = ptrace(PTRACE_ATTACH, child_pid, ignored, ignored);
+	if (ret)
+		perror("attach");
+	dprintf1("[%d] attach ret: %ld %d\n", getpid(), ret, __LINE__);
+	pkey_assert(ret != -1);
+	ret = waitpid(child_pid, &status, WUNTRACED);
+	if ((ret != child_pid) || !(WIFSTOPPED(status))) {
+		fprintf(stderr, "weird waitpid result %ld stat %x\n",
+				ret, status);
+		pkey_assert(0);
+	}
+	dprintf2("waitpid ret: %ld\n", ret);
+	dprintf2("waitpid status: %d\n", status);
+
+	pkey_access_deny(pkey);
+	pkey_write_deny(pkey);
+
+	/* Write access, untested for now:
+	ret = ptrace(PTRACE_POKEDATA, child_pid, peek_at, data);
+	pkey_assert(ret != -1);
+	dprintf1("poke at %p: %ld\n", peek_at, ret);
+	*/
+
+	/*
+	 * Try to access the pkey-protected "ptr" via ptrace:
+	 */
+	ret = ptrace(PTRACE_PEEKDATA, child_pid, ptr, ignored);
+	/* expect it to work, without an error: */
+	pkey_assert(ret != -1);
+	/* Now access from the current task, and expect an exception: */
+	peek_result = read_ptr(ptr);
+	expected_pkey_fault(pkey);
+
+	/*
+	 * Try to access the NON-pkey-protected "plain_ptr" via ptrace:
+	 */
+	ret = ptrace(PTRACE_PEEKDATA, child_pid, plain_ptr, ignored);
+	/* expect it to work, without an error: */
+	pkey_assert(ret != -1);
+	/* Now access from the current task, and expect NO exception: */
+	peek_result = read_ptr(plain_ptr);
+	do_not_expect_pkey_fault("read plain pointer after ptrace");
+
+	ret = ptrace(PTRACE_DETACH, child_pid, ignored, 0);
+	pkey_assert(ret != -1);
+
+	ret = kill(child_pid, SIGKILL);
+	pkey_assert(ret != -1);
+
+	wait(&status);
+
+	free(plain_ptr_unaligned);
+}
+
+void *get_pointer_to_instructions(void)
+{
+	void *p1;
+
+	p1 = ALIGN_PTR_UP(&lots_o_noops_around_write, PAGE_SIZE);
+	dprintf3("&lots_o_noops: %p\n", &lots_o_noops_around_write);
+	/* lots_o_noops_around_write should be page-aligned already */
+	assert(p1 == &lots_o_noops_around_write);
+
+	/* Point 'p1' at the *second* page of the function: */
+	p1 += PAGE_SIZE;
+
+	/*
+	 * Try to ensure we fault this in on next touch to ensure
+	 * we get an instruction fault as opposed to a data one
+	 */
+	madvise(p1, PAGE_SIZE, MADV_DONTNEED);
+
+	return p1;
+}
+
+void test_executing_on_unreadable_memory(int *ptr, u16 pkey)
+{
+	void *p1;
+	int scratch;
+	int ptr_contents;
+	int ret;
+
+	p1 = get_pointer_to_instructions();
+	lots_o_noops_around_write(&scratch);
+	ptr_contents = read_ptr(p1);
+	dprintf2("ptr (%p) contents@%d: %x\n", p1, __LINE__, ptr_contents);
+
+	ret = mprotect_pkey(p1, PAGE_SIZE, PROT_EXEC, (u64)pkey);
+	pkey_assert(!ret);
+	pkey_access_deny(pkey);
+
+	dprintf2("pkey_reg: %016llx\n", read_pkey_reg());
+
+	/*
+	 * Make sure this is an *instruction* fault
+	 */
+	madvise(p1, PAGE_SIZE, MADV_DONTNEED);
+	lots_o_noops_around_write(&scratch);
+	do_not_expect_pkey_fault("executing on PROT_EXEC memory");
+	expect_fault_on_read_execonly_key(p1, pkey);
+}
+
+void test_implicit_mprotect_exec_only_memory(int *ptr, u16 pkey)
+{
+	void *p1;
+	int scratch;
+	int ptr_contents;
+	int ret;
+
+	dprintf1("%s() start\n", __func__);
+
+	p1 = get_pointer_to_instructions();
+	lots_o_noops_around_write(&scratch);
+	ptr_contents = read_ptr(p1);
+	dprintf2("ptr (%p) contents@%d: %x\n", p1, __LINE__, ptr_contents);
+
+	/* Use a *normal* mprotect(), not mprotect_pkey(): */
+	ret = mprotect(p1, PAGE_SIZE, PROT_EXEC);
+	pkey_assert(!ret);
+
+	dprintf2("pkey_reg: %016llx\n", read_pkey_reg());
+
+	/* Make sure this is an *instruction* fault */
+	madvise(p1, PAGE_SIZE, MADV_DONTNEED);
+	lots_o_noops_around_write(&scratch);
+	do_not_expect_pkey_fault("executing on PROT_EXEC memory");
+	expect_fault_on_read_execonly_key(p1, UNKNOWN_PKEY);
+
+	/*
+	 * Put the memory back to non-PROT_EXEC.  Should clear the
+	 * exec-only pkey off the VMA and allow it to be readable
+	 * again.  Go to PROT_NONE first to check for a kernel bug
+	 * that did not clear the pkey when doing PROT_NONE.
+	 */
+	ret = mprotect(p1, PAGE_SIZE, PROT_NONE);
+	pkey_assert(!ret);
+
+	ret = mprotect(p1, PAGE_SIZE, PROT_READ|PROT_EXEC);
+	pkey_assert(!ret);
+	ptr_contents = read_ptr(p1);
+	do_not_expect_pkey_fault("plain read on recently PROT_EXEC area");
+}
+
+void test_mprotect_pkey_on_unsupported_cpu(int *ptr, u16 pkey)
+{
+	int size = PAGE_SIZE;
+	int sret;
+
+	if (cpu_has_pkeys()) {
+		dprintf1("SKIP: %s: no CPU support\n", __func__);
+		return;
+	}
+
+	sret = syscall(SYS_mprotect_key, ptr, size, PROT_READ, pkey);
+	pkey_assert(sret < 0);
+}
+
+void (*pkey_tests[])(int *ptr, u16 pkey) = {
+	test_read_of_write_disabled_region,
+	test_read_of_access_disabled_region,
+	test_read_of_access_disabled_region_with_page_already_mapped,
+	test_write_of_write_disabled_region,
+	test_write_of_write_disabled_region_with_page_already_mapped,
+	test_write_of_access_disabled_region,
+	test_write_of_access_disabled_region_with_page_already_mapped,
+	test_kernel_write_of_access_disabled_region,
+	test_kernel_write_of_write_disabled_region,
+	test_kernel_gup_of_access_disabled_region,
+	test_kernel_gup_write_to_write_disabled_region,
+	test_executing_on_unreadable_memory,
+	test_implicit_mprotect_exec_only_memory,
+	test_mprotect_with_pkey_0,
+	test_ptrace_of_child,
+	test_pkey_syscalls_on_non_allocated_pkey,
+	test_pkey_syscalls_bad_args,
+	test_pkey_alloc_exhaust,
+	test_pkey_alloc_free_attach_pkey0,
+};
+
+void run_tests_once(void)
+{
+	int *ptr;
+	int prot = PROT_READ|PROT_WRITE;
+
+	for (test_nr = 0; test_nr < ARRAY_SIZE(pkey_tests); test_nr++) {
+		int pkey;
+		int orig_pkey_faults = pkey_faults;
+
+		dprintf1("======================\n");
+		dprintf1("test %d preparing...\n", test_nr);
+
+		tracing_on();
+		pkey = alloc_random_pkey();
+		dprintf1("test %d starting with pkey: %d\n", test_nr, pkey);
+		ptr = malloc_pkey(PAGE_SIZE, prot, pkey);
+		dprintf1("test %d starting...\n", test_nr);
+		pkey_tests[test_nr](ptr, pkey);
+		dprintf1("freeing test memory: %p\n", ptr);
+		free_pkey_malloc(ptr);
+		sys_pkey_free(pkey);
+
+		dprintf1("pkey_faults: %d\n", pkey_faults);
+		dprintf1("orig_pkey_faults: %d\n", orig_pkey_faults);
+
+		tracing_off();
+		close_test_fds();
+
+		printf("test %2d PASSED (iteration %d)\n", test_nr, iteration_nr);
+		dprintf1("======================\n\n");
+	}
+	iteration_nr++;
+}
+
+void pkey_setup_shadow(void)
+{
+	shadow_pkey_reg = __read_pkey_reg();
+}
+
+int main(void)
+{
+	int nr_iterations = 22;
+	int pkeys_supported = is_pkeys_supported();
+
+	setup_handlers();
+
+	printf("has pkeys: %d\n", pkeys_supported);
+
+	if (!pkeys_supported) {
+		int size = PAGE_SIZE;
+		int *ptr;
+
+		printf("running PKEY tests for unsupported CPU/OS\n");
+
+		ptr  = mmap(NULL, size, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
+		assert(ptr != (void *)-1);
+		test_mprotect_pkey_on_unsupported_cpu(ptr, 1);
+		exit(0);
+	}
+
+	pkey_setup_shadow();
+	printf("startup pkey_reg: %016llx\n", read_pkey_reg());
+	setup_hugetlbfs();
+
+	while (nr_iterations-- > 0)
+		run_tests_once();
+
+	printf("done (all tests OK)\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/vm/write_to_hugetlbfs.c b/tools/testing/selftests/vm/write_to_hugetlbfs.c
index 110bc4e4015d..6a2caba19ee1 100644
--- a/tools/testing/selftests/vm/write_to_hugetlbfs.c
+++ b/tools/testing/selftests/vm/write_to_hugetlbfs.c
@@ -74,8 +74,6 @@ int main(int argc, char **argv)
 	int write = 0;
 	int reserve = 1;
 
-	unsigned long i;
-
 	if (signal(SIGINT, sig_handler) == SIG_ERR)
 		err(1, "\ncan't catch SIGINT\n");
 
diff --git a/tools/testing/selftests/wireguard/qemu/debug.config b/tools/testing/selftests/wireguard/qemu/debug.config
index 5909e7ef2a5c..807fa7dc60b8 100644
--- a/tools/testing/selftests/wireguard/qemu/debug.config
+++ b/tools/testing/selftests/wireguard/qemu/debug.config
@@ -58,7 +58,6 @@ CONFIG_RCU_EQS_DEBUG=y
 CONFIG_USER_STACKTRACE_SUPPORT=y
 CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_NOTIFIERS=y
-CONFIG_DOUBLEFAULT=y
 CONFIG_X86_DEBUG_FPU=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_PAGEALLOC=y
diff --git a/tools/testing/selftests/x86/.gitignore b/tools/testing/selftests/x86/.gitignore
index 022a1f3b64ef..1aaef5bf119a 100644
--- a/tools/testing/selftests/x86/.gitignore
+++ b/tools/testing/selftests/x86/.gitignore
@@ -12,5 +12,4 @@ ldt_gdt
 iopl
 mpx-mini-test
 ioperm
-protection_keys
 test_vdso
diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile
index 5d49bfec1e9a..5f16821c7f63 100644
--- a/tools/testing/selftests/x86/Makefile
+++ b/tools/testing/selftests/x86/Makefile
@@ -12,7 +12,7 @@ CAN_BUILD_WITH_NOPIE := $(shell ./check_cc.sh $(CC) trivial_program.c -no-pie)
 
 TARGETS_C_BOTHBITS := single_step_syscall sysret_ss_attrs syscall_nt test_mremap_vdso \
 			check_initial_reg_state sigreturn iopl ioperm \
-			protection_keys test_vdso test_vsyscall mov_ss_trap \
+			test_vdso test_vsyscall mov_ss_trap \
 			syscall_arg_fault
 TARGETS_C_32BIT_ONLY := entry_from_vm86 test_syscall_vdso unwind_vdso \
 			test_FCMOV test_FCOMI test_FISTTP \
diff --git a/tools/testing/selftests/x86/pkey-helpers.h b/tools/testing/selftests/x86/pkey-helpers.h
deleted file mode 100644
index 254e5436bdd9..000000000000
--- a/tools/testing/selftests/x86/pkey-helpers.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _PKEYS_HELPER_H
-#define _PKEYS_HELPER_H
-#define _GNU_SOURCE
-#include <string.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <signal.h>
-#include <assert.h>
-#include <stdlib.h>
-#include <ucontext.h>
-#include <sys/mman.h>
-
-#define NR_PKEYS 16
-#define PKRU_BITS_PER_PKEY 2
-
-#ifndef DEBUG_LEVEL
-#define DEBUG_LEVEL 0
-#endif
-#define DPRINT_IN_SIGNAL_BUF_SIZE 4096
-extern int dprint_in_signal;
-extern char dprint_in_signal_buffer[DPRINT_IN_SIGNAL_BUF_SIZE];
-static inline void sigsafe_printf(const char *format, ...)
-{
-	va_list ap;
-
-	if (!dprint_in_signal) {
-		va_start(ap, format);
-		vprintf(format, ap);
-		va_end(ap);
-	} else {
-		int ret;
-		/*
-		 * No printf() functions are signal-safe.
-		 * They deadlock easily. Write the format
-		 * string to get some output, even if
-		 * incomplete.
-		 */
-		ret = write(1, format, strlen(format));
-		if (ret < 0)
-			exit(1);
-	}
-}
-#define dprintf_level(level, args...) do {	\
-	if (level <= DEBUG_LEVEL)		\
-		sigsafe_printf(args);		\
-} while (0)
-#define dprintf0(args...) dprintf_level(0, args)
-#define dprintf1(args...) dprintf_level(1, args)
-#define dprintf2(args...) dprintf_level(2, args)
-#define dprintf3(args...) dprintf_level(3, args)
-#define dprintf4(args...) dprintf_level(4, args)
-
-extern unsigned int shadow_pkru;
-static inline unsigned int __rdpkru(void)
-{
-	unsigned int eax, edx;
-	unsigned int ecx = 0;
-	unsigned int pkru;
-
-	asm volatile(".byte 0x0f,0x01,0xee\n\t"
-		     : "=a" (eax), "=d" (edx)
-		     : "c" (ecx));
-	pkru = eax;
-	return pkru;
-}
-
-static inline unsigned int _rdpkru(int line)
-{
-	unsigned int pkru = __rdpkru();
-
-	dprintf4("rdpkru(line=%d) pkru: %x shadow: %x\n",
-			line, pkru, shadow_pkru);
-	assert(pkru == shadow_pkru);
-
-	return pkru;
-}
-
-#define rdpkru() _rdpkru(__LINE__)
-
-static inline void __wrpkru(unsigned int pkru)
-{
-	unsigned int eax = pkru;
-	unsigned int ecx = 0;
-	unsigned int edx = 0;
-
-	dprintf4("%s() changing %08x to %08x\n", __func__, __rdpkru(), pkru);
-	asm volatile(".byte 0x0f,0x01,0xef\n\t"
-		     : : "a" (eax), "c" (ecx), "d" (edx));
-	assert(pkru == __rdpkru());
-}
-
-static inline void wrpkru(unsigned int pkru)
-{
-	dprintf4("%s() changing %08x to %08x\n", __func__, __rdpkru(), pkru);
-	/* will do the shadow check for us: */
-	rdpkru();
-	__wrpkru(pkru);
-	shadow_pkru = pkru;
-	dprintf4("%s(%08x) pkru: %08x\n", __func__, pkru, __rdpkru());
-}
-
-/*
- * These are technically racy. since something could
- * change PKRU between the read and the write.
- */
-static inline void __pkey_access_allow(int pkey, int do_allow)
-{
-	unsigned int pkru = rdpkru();
-	int bit = pkey * 2;
-
-	if (do_allow)
-		pkru &= (1<<bit);
-	else
-		pkru |= (1<<bit);
-
-	dprintf4("pkru now: %08x\n", rdpkru());
-	wrpkru(pkru);
-}
-
-static inline void __pkey_write_allow(int pkey, int do_allow_write)
-{
-	long pkru = rdpkru();
-	int bit = pkey * 2 + 1;
-
-	if (do_allow_write)
-		pkru &= (1<<bit);
-	else
-		pkru |= (1<<bit);
-
-	wrpkru(pkru);
-	dprintf4("pkru now: %08x\n", rdpkru());
-}
-
-#define PROT_PKEY0     0x10            /* protection key value (bit 0) */
-#define PROT_PKEY1     0x20            /* protection key value (bit 1) */
-#define PROT_PKEY2     0x40            /* protection key value (bit 2) */
-#define PROT_PKEY3     0x80            /* protection key value (bit 3) */
-
-#define PAGE_SIZE 4096
-#define MB	(1<<20)
-
-static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
-		unsigned int *ecx, unsigned int *edx)
-{
-	/* ecx is often an input as well as an output. */
-	asm volatile(
-		"cpuid;"
-		: "=a" (*eax),
-		  "=b" (*ebx),
-		  "=c" (*ecx),
-		  "=d" (*edx)
-		: "0" (*eax), "2" (*ecx));
-}
-
-/* Intel-defined CPU features, CPUID level 0x00000007:0 (ecx) */
-#define X86_FEATURE_PKU        (1<<3) /* Protection Keys for Userspace */
-#define X86_FEATURE_OSPKE      (1<<4) /* OS Protection Keys Enable */
-
-static inline int cpu_has_pku(void)
-{
-	unsigned int eax;
-	unsigned int ebx;
-	unsigned int ecx;
-	unsigned int edx;
-
-	eax = 0x7;
-	ecx = 0x0;
-	__cpuid(&eax, &ebx, &ecx, &edx);
-
-	if (!(ecx & X86_FEATURE_PKU)) {
-		dprintf2("cpu does not have PKU\n");
-		return 0;
-	}
-	if (!(ecx & X86_FEATURE_OSPKE)) {
-		dprintf2("cpu does not have OSPKE\n");
-		return 0;
-	}
-	return 1;
-}
-
-#define XSTATE_PKRU_BIT	(9)
-#define XSTATE_PKRU	0x200
-
-int pkru_xstate_offset(void)
-{
-	unsigned int eax;
-	unsigned int ebx;
-	unsigned int ecx;
-	unsigned int edx;
-	int xstate_offset;
-	int xstate_size;
-	unsigned long XSTATE_CPUID = 0xd;
-	int leaf;
-
-	/* assume that XSTATE_PKRU is set in XCR0 */
-	leaf = XSTATE_PKRU_BIT;
-	{
-		eax = XSTATE_CPUID;
-		ecx = leaf;
-		__cpuid(&eax, &ebx, &ecx, &edx);
-
-		if (leaf == XSTATE_PKRU_BIT) {
-			xstate_offset = ebx;
-			xstate_size = eax;
-		}
-	}
-
-	if (xstate_size == 0) {
-		printf("could not find size/offset of PKRU in xsave state\n");
-		return 0;
-	}
-
-	return xstate_offset;
-}
-
-#endif /* _PKEYS_HELPER_H */
diff --git a/tools/testing/selftests/x86/protection_keys.c b/tools/testing/selftests/x86/protection_keys.c
deleted file mode 100644
index 480995bceefa..000000000000
--- a/tools/testing/selftests/x86/protection_keys.c
+++ /dev/null
@@ -1,1506 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Tests x86 Memory Protection Keys (see Documentation/core-api/protection-keys.rst)
- *
- * There are examples in here of:
- *  * how to set protection keys on memory
- *  * how to set/clear bits in PKRU (the rights register)
- *  * how to handle SEGV_PKRU signals and extract pkey-relevant
- *    information from the siginfo
- *
- * Things to add:
- *	make sure KSM and KSM COW breaking works
- *	prefault pages in at malloc, or not
- *	protect MPX bounds tables with protection keys?
- *	make sure VMA splitting/merging is working correctly
- *	OOMs can destroy mm->mmap (see exit_mmap()), so make sure it is immune to pkeys
- *	look for pkey "leaks" where it is still set on a VMA but "freed" back to the kernel
- *	do a plain mprotect() to a mprotect_pkey() area and make sure the pkey sticks
- *
- * Compile like this:
- *	gcc      -o protection_keys    -O2 -g -std=gnu99 -pthread -Wall protection_keys.c -lrt -ldl -lm
- *	gcc -m32 -o protection_keys_32 -O2 -g -std=gnu99 -pthread -Wall protection_keys.c -lrt -ldl -lm
- */
-#define _GNU_SOURCE
-#include <errno.h>
-#include <linux/futex.h>
-#include <sys/time.h>
-#include <sys/syscall.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <signal.h>
-#include <assert.h>
-#include <stdlib.h>
-#include <ucontext.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/ptrace.h>
-#include <setjmp.h>
-
-#include "pkey-helpers.h"
-
-int iteration_nr = 1;
-int test_nr;
-
-unsigned int shadow_pkru;
-
-#define HPAGE_SIZE	(1UL<<21)
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
-#define ALIGN_UP(x, align_to)	(((x) + ((align_to)-1)) & ~((align_to)-1))
-#define ALIGN_DOWN(x, align_to) ((x) & ~((align_to)-1))
-#define ALIGN_PTR_UP(p, ptr_align_to)	((typeof(p))ALIGN_UP((unsigned long)(p),	ptr_align_to))
-#define ALIGN_PTR_DOWN(p, ptr_align_to)	((typeof(p))ALIGN_DOWN((unsigned long)(p),	ptr_align_to))
-#define __stringify_1(x...)     #x
-#define __stringify(x...)       __stringify_1(x)
-
-#define PTR_ERR_ENOTSUP ((void *)-ENOTSUP)
-
-int dprint_in_signal;
-char dprint_in_signal_buffer[DPRINT_IN_SIGNAL_BUF_SIZE];
-
-extern void abort_hooks(void);
-#define pkey_assert(condition) do {		\
-	if (!(condition)) {			\
-		dprintf0("assert() at %s::%d test_nr: %d iteration: %d\n", \
-				__FILE__, __LINE__,	\
-				test_nr, iteration_nr);	\
-		dprintf0("errno at assert: %d", errno);	\
-		abort_hooks();			\
-		exit(__LINE__);			\
-	}					\
-} while (0)
-
-void cat_into_file(char *str, char *file)
-{
-	int fd = open(file, O_RDWR);
-	int ret;
-
-	dprintf2("%s(): writing '%s' to '%s'\n", __func__, str, file);
-	/*
-	 * these need to be raw because they are called under
-	 * pkey_assert()
-	 */
-	if (fd < 0) {
-		fprintf(stderr, "error opening '%s'\n", str);
-		perror("error: ");
-		exit(__LINE__);
-	}
-
-	ret = write(fd, str, strlen(str));
-	if (ret != strlen(str)) {
-		perror("write to file failed");
-		fprintf(stderr, "filename: '%s' str: '%s'\n", file, str);
-		exit(__LINE__);
-	}
-	close(fd);
-}
-
-#if CONTROL_TRACING > 0
-static int warned_tracing;
-int tracing_root_ok(void)
-{
-	if (geteuid() != 0) {
-		if (!warned_tracing)
-			fprintf(stderr, "WARNING: not run as root, "
-					"can not do tracing control\n");
-		warned_tracing = 1;
-		return 0;
-	}
-	return 1;
-}
-#endif
-
-void tracing_on(void)
-{
-#if CONTROL_TRACING > 0
-#define TRACEDIR "/sys/kernel/debug/tracing"
-	char pidstr[32];
-
-	if (!tracing_root_ok())
-		return;
-
-	sprintf(pidstr, "%d", getpid());
-	cat_into_file("0", TRACEDIR "/tracing_on");
-	cat_into_file("\n", TRACEDIR "/trace");
-	if (1) {
-		cat_into_file("function_graph", TRACEDIR "/current_tracer");
-		cat_into_file("1", TRACEDIR "/options/funcgraph-proc");
-	} else {
-		cat_into_file("nop", TRACEDIR "/current_tracer");
-	}
-	cat_into_file(pidstr, TRACEDIR "/set_ftrace_pid");
-	cat_into_file("1", TRACEDIR "/tracing_on");
-	dprintf1("enabled tracing\n");
-#endif
-}
-
-void tracing_off(void)
-{
-#if CONTROL_TRACING > 0
-	if (!tracing_root_ok())
-		return;
-	cat_into_file("0", "/sys/kernel/debug/tracing/tracing_on");
-#endif
-}
-
-void abort_hooks(void)
-{
-	fprintf(stderr, "running %s()...\n", __func__);
-	tracing_off();
-#ifdef SLEEP_ON_ABORT
-	sleep(SLEEP_ON_ABORT);
-#endif
-}
-
-static inline void __page_o_noops(void)
-{
-	/* 8-bytes of instruction * 512 bytes = 1 page */
-	asm(".rept 512 ; nopl 0x7eeeeeee(%eax) ; .endr");
-}
-
-/*
- * This attempts to have roughly a page of instructions followed by a few
- * instructions that do a write, and another page of instructions.  That
- * way, we are pretty sure that the write is in the second page of
- * instructions and has at least a page of padding behind it.
- *
- * *That* lets us be sure to madvise() away the write instruction, which
- * will then fault, which makes sure that the fault code handles
- * execute-only memory properly.
- */
-__attribute__((__aligned__(PAGE_SIZE)))
-void lots_o_noops_around_write(int *write_to_me)
-{
-	dprintf3("running %s()\n", __func__);
-	__page_o_noops();
-	/* Assume this happens in the second page of instructions: */
-	*write_to_me = __LINE__;
-	/* pad out by another page: */
-	__page_o_noops();
-	dprintf3("%s() done\n", __func__);
-}
-
-/* Define some kernel-like types */
-#define  u8 uint8_t
-#define u16 uint16_t
-#define u32 uint32_t
-#define u64 uint64_t
-
-#ifdef __i386__
-
-#ifndef SYS_mprotect_key
-# define SYS_mprotect_key	380
-#endif
-
-#ifndef SYS_pkey_alloc
-# define SYS_pkey_alloc		381
-# define SYS_pkey_free		382
-#endif
-
-#define REG_IP_IDX		REG_EIP
-#define si_pkey_offset		0x14
-
-#else
-
-#ifndef SYS_mprotect_key
-# define SYS_mprotect_key	329
-#endif
-
-#ifndef SYS_pkey_alloc
-# define SYS_pkey_alloc		330
-# define SYS_pkey_free		331
-#endif
-
-#define REG_IP_IDX		REG_RIP
-#define si_pkey_offset		0x20
-
-#endif
-
-void dump_mem(void *dumpme, int len_bytes)
-{
-	char *c = (void *)dumpme;
-	int i;
-
-	for (i = 0; i < len_bytes; i += sizeof(u64)) {
-		u64 *ptr = (u64 *)(c + i);
-		dprintf1("dump[%03d][@%p]: %016jx\n", i, ptr, *ptr);
-	}
-}
-
-/* Failed address bound checks: */
-#ifndef SEGV_BNDERR
-# define SEGV_BNDERR		3
-#endif
-
-#ifndef SEGV_PKUERR
-# define SEGV_PKUERR		4
-#endif
-
-static char *si_code_str(int si_code)
-{
-	if (si_code == SEGV_MAPERR)
-		return "SEGV_MAPERR";
-	if (si_code == SEGV_ACCERR)
-		return "SEGV_ACCERR";
-	if (si_code == SEGV_BNDERR)
-		return "SEGV_BNDERR";
-	if (si_code == SEGV_PKUERR)
-		return "SEGV_PKUERR";
-	return "UNKNOWN";
-}
-
-int pkru_faults;
-int last_si_pkey = -1;
-void signal_handler(int signum, siginfo_t *si, void *vucontext)
-{
-	ucontext_t *uctxt = vucontext;
-	int trapno;
-	unsigned long ip;
-	char *fpregs;
-	u32 *pkru_ptr;
-	u64 siginfo_pkey;
-	u32 *si_pkey_ptr;
-	int pkru_offset;
-	fpregset_t fpregset;
-
-	dprint_in_signal = 1;
-	dprintf1(">>>>===============SIGSEGV============================\n");
-	dprintf1("%s()::%d, pkru: 0x%x shadow: %x\n", __func__, __LINE__,
-			__rdpkru(), shadow_pkru);
-
-	trapno = uctxt->uc_mcontext.gregs[REG_TRAPNO];
-	ip = uctxt->uc_mcontext.gregs[REG_IP_IDX];
-	fpregset = uctxt->uc_mcontext.fpregs;
-	fpregs = (void *)fpregset;
-
-	dprintf2("%s() trapno: %d ip: 0x%lx info->si_code: %s/%d\n", __func__,
-			trapno, ip, si_code_str(si->si_code), si->si_code);
-#ifdef __i386__
-	/*
-	 * 32-bit has some extra padding so that userspace can tell whether
-	 * the XSTATE header is present in addition to the "legacy" FPU
-	 * state.  We just assume that it is here.
-	 */
-	fpregs += 0x70;
-#endif
-	pkru_offset = pkru_xstate_offset();
-	pkru_ptr = (void *)(&fpregs[pkru_offset]);
-
-	dprintf1("siginfo: %p\n", si);
-	dprintf1(" fpregs: %p\n", fpregs);
-	/*
-	 * If we got a PKRU fault, we *HAVE* to have at least one bit set in
-	 * here.
-	 */
-	dprintf1("pkru_xstate_offset: %d\n", pkru_xstate_offset());
-	if (DEBUG_LEVEL > 4)
-		dump_mem(pkru_ptr - 128, 256);
-	pkey_assert(*pkru_ptr);
-
-	if ((si->si_code == SEGV_MAPERR) ||
-	    (si->si_code == SEGV_ACCERR) ||
-	    (si->si_code == SEGV_BNDERR)) {
-		printf("non-PK si_code, exiting...\n");
-		exit(4);
-	}
-
-	si_pkey_ptr = (u32 *)(((u8 *)si) + si_pkey_offset);
-	dprintf1("si_pkey_ptr: %p\n", si_pkey_ptr);
-	dump_mem((u8 *)si_pkey_ptr - 8, 24);
-	siginfo_pkey = *si_pkey_ptr;
-	pkey_assert(siginfo_pkey < NR_PKEYS);
-	last_si_pkey = siginfo_pkey;
-
-	dprintf1("signal pkru from xsave: %08x\n", *pkru_ptr);
-	/* need __rdpkru() version so we do not do shadow_pkru checking */
-	dprintf1("signal pkru from  pkru: %08x\n", __rdpkru());
-	dprintf1("pkey from siginfo: %jx\n", siginfo_pkey);
-	*(u64 *)pkru_ptr = 0x00000000;
-	dprintf1("WARNING: set PRKU=0 to allow faulting instruction to continue\n");
-	pkru_faults++;
-	dprintf1("<<<<==================================================\n");
-	dprint_in_signal = 0;
-}
-
-int wait_all_children(void)
-{
-	int status;
-	return waitpid(-1, &status, 0);
-}
-
-void sig_chld(int x)
-{
-	dprint_in_signal = 1;
-	dprintf2("[%d] SIGCHLD: %d\n", getpid(), x);
-	dprint_in_signal = 0;
-}
-
-void setup_sigsegv_handler(void)
-{
-	int r, rs;
-	struct sigaction newact;
-	struct sigaction oldact;
-
-	/* #PF is mapped to sigsegv */
-	int signum  = SIGSEGV;
-
-	newact.sa_handler = 0;
-	newact.sa_sigaction = signal_handler;
-
-	/*sigset_t - signals to block while in the handler */
-	/* get the old signal mask. */
-	rs = sigprocmask(SIG_SETMASK, 0, &newact.sa_mask);
-	pkey_assert(rs == 0);
-
-	/* call sa_sigaction, not sa_handler*/
-	newact.sa_flags = SA_SIGINFO;
-
-	newact.sa_restorer = 0;  /* void(*)(), obsolete */
-	r = sigaction(signum, &newact, &oldact);
-	r = sigaction(SIGALRM, &newact, &oldact);
-	pkey_assert(r == 0);
-}
-
-void setup_handlers(void)
-{
-	signal(SIGCHLD, &sig_chld);
-	setup_sigsegv_handler();
-}
-
-pid_t fork_lazy_child(void)
-{
-	pid_t forkret;
-
-	forkret = fork();
-	pkey_assert(forkret >= 0);
-	dprintf3("[%d] fork() ret: %d\n", getpid(), forkret);
-
-	if (!forkret) {
-		/* in the child */
-		while (1) {
-			dprintf1("child sleeping...\n");
-			sleep(30);
-		}
-	}
-	return forkret;
-}
-
-#ifndef PKEY_DISABLE_ACCESS
-# define PKEY_DISABLE_ACCESS	0x1
-#endif
-
-#ifndef PKEY_DISABLE_WRITE
-# define PKEY_DISABLE_WRITE	0x2
-#endif
-
-static u32 hw_pkey_get(int pkey, unsigned long flags)
-{
-	u32 mask = (PKEY_DISABLE_ACCESS|PKEY_DISABLE_WRITE);
-	u32 pkru = __rdpkru();
-	u32 shifted_pkru;
-	u32 masked_pkru;
-
-	dprintf1("%s(pkey=%d, flags=%lx) = %x / %d\n",
-			__func__, pkey, flags, 0, 0);
-	dprintf2("%s() raw pkru: %x\n", __func__, pkru);
-
-	shifted_pkru = (pkru >> (pkey * PKRU_BITS_PER_PKEY));
-	dprintf2("%s() shifted_pkru: %x\n", __func__, shifted_pkru);
-	masked_pkru = shifted_pkru & mask;
-	dprintf2("%s() masked  pkru: %x\n", __func__, masked_pkru);
-	/*
-	 * shift down the relevant bits to the lowest two, then
-	 * mask off all the other high bits.
-	 */
-	return masked_pkru;
-}
-
-static int hw_pkey_set(int pkey, unsigned long rights, unsigned long flags)
-{
-	u32 mask = (PKEY_DISABLE_ACCESS|PKEY_DISABLE_WRITE);
-	u32 old_pkru = __rdpkru();
-	u32 new_pkru;
-
-	/* make sure that 'rights' only contains the bits we expect: */
-	assert(!(rights & ~mask));
-
-	/* copy old pkru */
-	new_pkru = old_pkru;
-	/* mask out bits from pkey in old value: */
-	new_pkru &= ~(mask << (pkey * PKRU_BITS_PER_PKEY));
-	/* OR in new bits for pkey: */
-	new_pkru |= (rights << (pkey * PKRU_BITS_PER_PKEY));
-
-	__wrpkru(new_pkru);
-
-	dprintf3("%s(pkey=%d, rights=%lx, flags=%lx) = %x pkru now: %x old_pkru: %x\n",
-			__func__, pkey, rights, flags, 0, __rdpkru(), old_pkru);
-	return 0;
-}
-
-void pkey_disable_set(int pkey, int flags)
-{
-	unsigned long syscall_flags = 0;
-	int ret;
-	int pkey_rights;
-	u32 orig_pkru = rdpkru();
-
-	dprintf1("START->%s(%d, 0x%x)\n", __func__,
-		pkey, flags);
-	pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE));
-
-	pkey_rights = hw_pkey_get(pkey, syscall_flags);
-
-	dprintf1("%s(%d) hw_pkey_get(%d): %x\n", __func__,
-			pkey, pkey, pkey_rights);
-	pkey_assert(pkey_rights >= 0);
-
-	pkey_rights |= flags;
-
-	ret = hw_pkey_set(pkey, pkey_rights, syscall_flags);
-	assert(!ret);
-	/*pkru and flags have the same format */
-	shadow_pkru |= flags << (pkey * 2);
-	dprintf1("%s(%d) shadow: 0x%x\n", __func__, pkey, shadow_pkru);
-
-	pkey_assert(ret >= 0);
-
-	pkey_rights = hw_pkey_get(pkey, syscall_flags);
-	dprintf1("%s(%d) hw_pkey_get(%d): %x\n", __func__,
-			pkey, pkey, pkey_rights);
-
-	dprintf1("%s(%d) pkru: 0x%x\n", __func__, pkey, rdpkru());
-	if (flags)
-		pkey_assert(rdpkru() > orig_pkru);
-	dprintf1("END<---%s(%d, 0x%x)\n", __func__,
-		pkey, flags);
-}
-
-void pkey_disable_clear(int pkey, int flags)
-{
-	unsigned long syscall_flags = 0;
-	int ret;
-	int pkey_rights = hw_pkey_get(pkey, syscall_flags);
-	u32 orig_pkru = rdpkru();
-
-	pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE));
-
-	dprintf1("%s(%d) hw_pkey_get(%d): %x\n", __func__,
-			pkey, pkey, pkey_rights);
-	pkey_assert(pkey_rights >= 0);
-
-	pkey_rights |= flags;
-
-	ret = hw_pkey_set(pkey, pkey_rights, 0);
-	/* pkru and flags have the same format */
-	shadow_pkru &= ~(flags << (pkey * 2));
-	pkey_assert(ret >= 0);
-
-	pkey_rights = hw_pkey_get(pkey, syscall_flags);
-	dprintf1("%s(%d) hw_pkey_get(%d): %x\n", __func__,
-			pkey, pkey, pkey_rights);
-
-	dprintf1("%s(%d) pkru: 0x%x\n", __func__, pkey, rdpkru());
-	if (flags)
-		assert(rdpkru() > orig_pkru);
-}
-
-void pkey_write_allow(int pkey)
-{
-	pkey_disable_clear(pkey, PKEY_DISABLE_WRITE);
-}
-void pkey_write_deny(int pkey)
-{
-	pkey_disable_set(pkey, PKEY_DISABLE_WRITE);
-}
-void pkey_access_allow(int pkey)
-{
-	pkey_disable_clear(pkey, PKEY_DISABLE_ACCESS);
-}
-void pkey_access_deny(int pkey)
-{
-	pkey_disable_set(pkey, PKEY_DISABLE_ACCESS);
-}
-
-int sys_mprotect_pkey(void *ptr, size_t size, unsigned long orig_prot,
-		unsigned long pkey)
-{
-	int sret;
-
-	dprintf2("%s(0x%p, %zx, prot=%lx, pkey=%lx)\n", __func__,
-			ptr, size, orig_prot, pkey);
-
-	errno = 0;
-	sret = syscall(SYS_mprotect_key, ptr, size, orig_prot, pkey);
-	if (errno) {
-		dprintf2("SYS_mprotect_key sret: %d\n", sret);
-		dprintf2("SYS_mprotect_key prot: 0x%lx\n", orig_prot);
-		dprintf2("SYS_mprotect_key failed, errno: %d\n", errno);
-		if (DEBUG_LEVEL >= 2)
-			perror("SYS_mprotect_pkey");
-	}
-	return sret;
-}
-
-int sys_pkey_alloc(unsigned long flags, unsigned long init_val)
-{
-	int ret = syscall(SYS_pkey_alloc, flags, init_val);
-	dprintf1("%s(flags=%lx, init_val=%lx) syscall ret: %d errno: %d\n",
-			__func__, flags, init_val, ret, errno);
-	return ret;
-}
-
-int alloc_pkey(void)
-{
-	int ret;
-	unsigned long init_val = 0x0;
-
-	dprintf1("alloc_pkey()::%d, pkru: 0x%x shadow: %x\n",
-			__LINE__, __rdpkru(), shadow_pkru);
-	ret = sys_pkey_alloc(0, init_val);
-	/*
-	 * pkey_alloc() sets PKRU, so we need to reflect it in
-	 * shadow_pkru:
-	 */
-	dprintf4("alloc_pkey()::%d, ret: %d pkru: 0x%x shadow: 0x%x\n",
-			__LINE__, ret, __rdpkru(), shadow_pkru);
-	if (ret) {
-		/* clear both the bits: */
-		shadow_pkru &= ~(0x3      << (ret * 2));
-		dprintf4("alloc_pkey()::%d, ret: %d pkru: 0x%x shadow: 0x%x\n",
-				__LINE__, ret, __rdpkru(), shadow_pkru);
-		/*
-		 * move the new state in from init_val
-		 * (remember, we cheated and init_val == pkru format)
-		 */
-		shadow_pkru |=  (init_val << (ret * 2));
-	}
-	dprintf4("alloc_pkey()::%d, ret: %d pkru: 0x%x shadow: 0x%x\n",
-			__LINE__, ret, __rdpkru(), shadow_pkru);
-	dprintf1("alloc_pkey()::%d errno: %d\n", __LINE__, errno);
-	/* for shadow checking: */
-	rdpkru();
-	dprintf4("alloc_pkey()::%d, ret: %d pkru: 0x%x shadow: 0x%x\n",
-			__LINE__, ret, __rdpkru(), shadow_pkru);
-	return ret;
-}
-
-int sys_pkey_free(unsigned long pkey)
-{
-	int ret = syscall(SYS_pkey_free, pkey);
-	dprintf1("%s(pkey=%ld) syscall ret: %d\n", __func__, pkey, ret);
-	return ret;
-}
-
-/*
- * I had a bug where pkey bits could be set by mprotect() but
- * not cleared.  This ensures we get lots of random bit sets
- * and clears on the vma and pte pkey bits.
- */
-int alloc_random_pkey(void)
-{
-	int max_nr_pkey_allocs;
-	int ret;
-	int i;
-	int alloced_pkeys[NR_PKEYS];
-	int nr_alloced = 0;
-	int random_index;
-	memset(alloced_pkeys, 0, sizeof(alloced_pkeys));
-
-	/* allocate every possible key and make a note of which ones we got */
-	max_nr_pkey_allocs = NR_PKEYS;
-	max_nr_pkey_allocs = 1;
-	for (i = 0; i < max_nr_pkey_allocs; i++) {
-		int new_pkey = alloc_pkey();
-		if (new_pkey < 0)
-			break;
-		alloced_pkeys[nr_alloced++] = new_pkey;
-	}
-
-	pkey_assert(nr_alloced > 0);
-	/* select a random one out of the allocated ones */
-	random_index = rand() % nr_alloced;
-	ret = alloced_pkeys[random_index];
-	/* now zero it out so we don't free it next */
-	alloced_pkeys[random_index] = 0;
-
-	/* go through the allocated ones that we did not want and free them */
-	for (i = 0; i < nr_alloced; i++) {
-		int free_ret;
-		if (!alloced_pkeys[i])
-			continue;
-		free_ret = sys_pkey_free(alloced_pkeys[i]);
-		pkey_assert(!free_ret);
-	}
-	dprintf1("%s()::%d, ret: %d pkru: 0x%x shadow: 0x%x\n", __func__,
-			__LINE__, ret, __rdpkru(), shadow_pkru);
-	return ret;
-}
-
-int mprotect_pkey(void *ptr, size_t size, unsigned long orig_prot,
-		unsigned long pkey)
-{
-	int nr_iterations = random() % 100;
-	int ret;
-
-	while (0) {
-		int rpkey = alloc_random_pkey();
-		ret = sys_mprotect_pkey(ptr, size, orig_prot, pkey);
-		dprintf1("sys_mprotect_pkey(%p, %zx, prot=0x%lx, pkey=%ld) ret: %d\n",
-				ptr, size, orig_prot, pkey, ret);
-		if (nr_iterations-- < 0)
-			break;
-
-		dprintf1("%s()::%d, ret: %d pkru: 0x%x shadow: 0x%x\n", __func__,
-			__LINE__, ret, __rdpkru(), shadow_pkru);
-		sys_pkey_free(rpkey);
-		dprintf1("%s()::%d, ret: %d pkru: 0x%x shadow: 0x%x\n", __func__,
-			__LINE__, ret, __rdpkru(), shadow_pkru);
-	}
-	pkey_assert(pkey < NR_PKEYS);
-
-	ret = sys_mprotect_pkey(ptr, size, orig_prot, pkey);
-	dprintf1("mprotect_pkey(%p, %zx, prot=0x%lx, pkey=%ld) ret: %d\n",
-			ptr, size, orig_prot, pkey, ret);
-	pkey_assert(!ret);
-	dprintf1("%s()::%d, ret: %d pkru: 0x%x shadow: 0x%x\n", __func__,
-			__LINE__, ret, __rdpkru(), shadow_pkru);
-	return ret;
-}
-
-struct pkey_malloc_record {
-	void *ptr;
-	long size;
-	int prot;
-};
-struct pkey_malloc_record *pkey_malloc_records;
-struct pkey_malloc_record *pkey_last_malloc_record;
-long nr_pkey_malloc_records;
-void record_pkey_malloc(void *ptr, long size, int prot)
-{
-	long i;
-	struct pkey_malloc_record *rec = NULL;
-
-	for (i = 0; i < nr_pkey_malloc_records; i++) {
-		rec = &pkey_malloc_records[i];
-		/* find a free record */
-		if (rec)
-			break;
-	}
-	if (!rec) {
-		/* every record is full */
-		size_t old_nr_records = nr_pkey_malloc_records;
-		size_t new_nr_records = (nr_pkey_malloc_records * 2 + 1);
-		size_t new_size = new_nr_records * sizeof(struct pkey_malloc_record);
-		dprintf2("new_nr_records: %zd\n", new_nr_records);
-		dprintf2("new_size: %zd\n", new_size);
-		pkey_malloc_records = realloc(pkey_malloc_records, new_size);
-		pkey_assert(pkey_malloc_records != NULL);
-		rec = &pkey_malloc_records[nr_pkey_malloc_records];
-		/*
-		 * realloc() does not initialize memory, so zero it from
-		 * the first new record all the way to the end.
-		 */
-		for (i = 0; i < new_nr_records - old_nr_records; i++)
-			memset(rec + i, 0, sizeof(*rec));
-	}
-	dprintf3("filling malloc record[%d/%p]: {%p, %ld}\n",
-		(int)(rec - pkey_malloc_records), rec, ptr, size);
-	rec->ptr = ptr;
-	rec->size = size;
-	rec->prot = prot;
-	pkey_last_malloc_record = rec;
-	nr_pkey_malloc_records++;
-}
-
-void free_pkey_malloc(void *ptr)
-{
-	long i;
-	int ret;
-	dprintf3("%s(%p)\n", __func__, ptr);
-	for (i = 0; i < nr_pkey_malloc_records; i++) {
-		struct pkey_malloc_record *rec = &pkey_malloc_records[i];
-		dprintf4("looking for ptr %p at record[%ld/%p]: {%p, %ld}\n",
-				ptr, i, rec, rec->ptr, rec->size);
-		if ((ptr <  rec->ptr) ||
-		    (ptr >= rec->ptr + rec->size))
-			continue;
-
-		dprintf3("found ptr %p at record[%ld/%p]: {%p, %ld}\n",
-				ptr, i, rec, rec->ptr, rec->size);
-		nr_pkey_malloc_records--;
-		ret = munmap(rec->ptr, rec->size);
-		dprintf3("munmap ret: %d\n", ret);
-		pkey_assert(!ret);
-		dprintf3("clearing rec->ptr, rec: %p\n", rec);
-		rec->ptr = NULL;
-		dprintf3("done clearing rec->ptr, rec: %p\n", rec);
-		return;
-	}
-	pkey_assert(false);
-}
-
-
-void *malloc_pkey_with_mprotect(long size, int prot, u16 pkey)
-{
-	void *ptr;
-	int ret;
-
-	rdpkru();
-	dprintf1("doing %s(size=%ld, prot=0x%x, pkey=%d)\n", __func__,
-			size, prot, pkey);
-	pkey_assert(pkey < NR_PKEYS);
-	ptr = mmap(NULL, size, prot, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
-	pkey_assert(ptr != (void *)-1);
-	ret = mprotect_pkey((void *)ptr, PAGE_SIZE, prot, pkey);
-	pkey_assert(!ret);
-	record_pkey_malloc(ptr, size, prot);
-	rdpkru();
-
-	dprintf1("%s() for pkey %d @ %p\n", __func__, pkey, ptr);
-	return ptr;
-}
-
-void *malloc_pkey_anon_huge(long size, int prot, u16 pkey)
-{
-	int ret;
-	void *ptr;
-
-	dprintf1("doing %s(size=%ld, prot=0x%x, pkey=%d)\n", __func__,
-			size, prot, pkey);
-	/*
-	 * Guarantee we can fit at least one huge page in the resulting
-	 * allocation by allocating space for 2:
-	 */
-	size = ALIGN_UP(size, HPAGE_SIZE * 2);
-	ptr = mmap(NULL, size, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
-	pkey_assert(ptr != (void *)-1);
-	record_pkey_malloc(ptr, size, prot);
-	mprotect_pkey(ptr, size, prot, pkey);
-
-	dprintf1("unaligned ptr: %p\n", ptr);
-	ptr = ALIGN_PTR_UP(ptr, HPAGE_SIZE);
-	dprintf1("  aligned ptr: %p\n", ptr);
-	ret = madvise(ptr, HPAGE_SIZE, MADV_HUGEPAGE);
-	dprintf1("MADV_HUGEPAGE ret: %d\n", ret);
-	ret = madvise(ptr, HPAGE_SIZE, MADV_WILLNEED);
-	dprintf1("MADV_WILLNEED ret: %d\n", ret);
-	memset(ptr, 0, HPAGE_SIZE);
-
-	dprintf1("mmap()'d thp for pkey %d @ %p\n", pkey, ptr);
-	return ptr;
-}
-
-int hugetlb_setup_ok;
-#define GET_NR_HUGE_PAGES 10
-void setup_hugetlbfs(void)
-{
-	int err;
-	int fd;
-	char buf[] = "123";
-
-	if (geteuid() != 0) {
-		fprintf(stderr, "WARNING: not run as root, can not do hugetlb test\n");
-		return;
-	}
-
-	cat_into_file(__stringify(GET_NR_HUGE_PAGES), "/proc/sys/vm/nr_hugepages");
-
-	/*
-	 * Now go make sure that we got the pages and that they
-	 * are 2M pages.  Someone might have made 1G the default.
-	 */
-	fd = open("/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages", O_RDONLY);
-	if (fd < 0) {
-		perror("opening sysfs 2M hugetlb config");
-		return;
-	}
-
-	/* -1 to guarantee leaving the trailing \0 */
-	err = read(fd, buf, sizeof(buf)-1);
-	close(fd);
-	if (err <= 0) {
-		perror("reading sysfs 2M hugetlb config");
-		return;
-	}
-
-	if (atoi(buf) != GET_NR_HUGE_PAGES) {
-		fprintf(stderr, "could not confirm 2M pages, got: '%s' expected %d\n",
-			buf, GET_NR_HUGE_PAGES);
-		return;
-	}
-
-	hugetlb_setup_ok = 1;
-}
-
-void *malloc_pkey_hugetlb(long size, int prot, u16 pkey)
-{
-	void *ptr;
-	int flags = MAP_ANONYMOUS|MAP_PRIVATE|MAP_HUGETLB;
-
-	if (!hugetlb_setup_ok)
-		return PTR_ERR_ENOTSUP;
-
-	dprintf1("doing %s(%ld, %x, %x)\n", __func__, size, prot, pkey);
-	size = ALIGN_UP(size, HPAGE_SIZE * 2);
-	pkey_assert(pkey < NR_PKEYS);
-	ptr = mmap(NULL, size, PROT_NONE, flags, -1, 0);
-	pkey_assert(ptr != (void *)-1);
-	mprotect_pkey(ptr, size, prot, pkey);
-
-	record_pkey_malloc(ptr, size, prot);
-
-	dprintf1("mmap()'d hugetlbfs for pkey %d @ %p\n", pkey, ptr);
-	return ptr;
-}
-
-void *malloc_pkey_mmap_dax(long size, int prot, u16 pkey)
-{
-	void *ptr;
-	int fd;
-
-	dprintf1("doing %s(size=%ld, prot=0x%x, pkey=%d)\n", __func__,
-			size, prot, pkey);
-	pkey_assert(pkey < NR_PKEYS);
-	fd = open("/dax/foo", O_RDWR);
-	pkey_assert(fd >= 0);
-
-	ptr = mmap(0, size, prot, MAP_SHARED, fd, 0);
-	pkey_assert(ptr != (void *)-1);
-
-	mprotect_pkey(ptr, size, prot, pkey);
-
-	record_pkey_malloc(ptr, size, prot);
-
-	dprintf1("mmap()'d for pkey %d @ %p\n", pkey, ptr);
-	close(fd);
-	return ptr;
-}
-
-void *(*pkey_malloc[])(long size, int prot, u16 pkey) = {
-
-	malloc_pkey_with_mprotect,
-	malloc_pkey_anon_huge,
-	malloc_pkey_hugetlb
-/* can not do direct with the pkey_mprotect() API:
-	malloc_pkey_mmap_direct,
-	malloc_pkey_mmap_dax,
-*/
-};
-
-void *malloc_pkey(long size, int prot, u16 pkey)
-{
-	void *ret;
-	static int malloc_type;
-	int nr_malloc_types = ARRAY_SIZE(pkey_malloc);
-
-	pkey_assert(pkey < NR_PKEYS);
-
-	while (1) {
-		pkey_assert(malloc_type < nr_malloc_types);
-
-		ret = pkey_malloc[malloc_type](size, prot, pkey);
-		pkey_assert(ret != (void *)-1);
-
-		malloc_type++;
-		if (malloc_type >= nr_malloc_types)
-			malloc_type = (random()%nr_malloc_types);
-
-		/* try again if the malloc_type we tried is unsupported */
-		if (ret == PTR_ERR_ENOTSUP)
-			continue;
-
-		break;
-	}
-
-	dprintf3("%s(%ld, prot=%x, pkey=%x) returning: %p\n", __func__,
-			size, prot, pkey, ret);
-	return ret;
-}
-
-int last_pkru_faults;
-#define UNKNOWN_PKEY -2
-void expected_pk_fault(int pkey)
-{
-	dprintf2("%s(): last_pkru_faults: %d pkru_faults: %d\n",
-			__func__, last_pkru_faults, pkru_faults);
-	dprintf2("%s(%d): last_si_pkey: %d\n", __func__, pkey, last_si_pkey);
-	pkey_assert(last_pkru_faults + 1 == pkru_faults);
-
-       /*
-	* For exec-only memory, we do not know the pkey in
-	* advance, so skip this check.
-	*/
-	if (pkey != UNKNOWN_PKEY)
-		pkey_assert(last_si_pkey == pkey);
-
-	/*
-	 * The signal handler shold have cleared out PKRU to let the
-	 * test program continue.  We now have to restore it.
-	 */
-	if (__rdpkru() != 0)
-		pkey_assert(0);
-
-	__wrpkru(shadow_pkru);
-	dprintf1("%s() set PKRU=%x to restore state after signal nuked it\n",
-			__func__, shadow_pkru);
-	last_pkru_faults = pkru_faults;
-	last_si_pkey = -1;
-}
-
-#define do_not_expect_pk_fault(msg)	do {			\
-	if (last_pkru_faults != pkru_faults)			\
-		dprintf0("unexpected PK fault: %s\n", msg);	\
-	pkey_assert(last_pkru_faults == pkru_faults);		\
-} while (0)
-
-int test_fds[10] = { -1 };
-int nr_test_fds;
-void __save_test_fd(int fd)
-{
-	pkey_assert(fd >= 0);
-	pkey_assert(nr_test_fds < ARRAY_SIZE(test_fds));
-	test_fds[nr_test_fds] = fd;
-	nr_test_fds++;
-}
-
-int get_test_read_fd(void)
-{
-	int test_fd = open("/etc/passwd", O_RDONLY);
-	__save_test_fd(test_fd);
-	return test_fd;
-}
-
-void close_test_fds(void)
-{
-	int i;
-
-	for (i = 0; i < nr_test_fds; i++) {
-		if (test_fds[i] < 0)
-			continue;
-		close(test_fds[i]);
-		test_fds[i] = -1;
-	}
-	nr_test_fds = 0;
-}
-
-#define barrier() __asm__ __volatile__("": : :"memory")
-__attribute__((noinline)) int read_ptr(int *ptr)
-{
-	/*
-	 * Keep GCC from optimizing this away somehow
-	 */
-	barrier();
-	return *ptr;
-}
-
-void test_read_of_write_disabled_region(int *ptr, u16 pkey)
-{
-	int ptr_contents;
-
-	dprintf1("disabling write access to PKEY[1], doing read\n");
-	pkey_write_deny(pkey);
-	ptr_contents = read_ptr(ptr);
-	dprintf1("*ptr: %d\n", ptr_contents);
-	dprintf1("\n");
-}
-void test_read_of_access_disabled_region(int *ptr, u16 pkey)
-{
-	int ptr_contents;
-
-	dprintf1("disabling access to PKEY[%02d], doing read @ %p\n", pkey, ptr);
-	rdpkru();
-	pkey_access_deny(pkey);
-	ptr_contents = read_ptr(ptr);
-	dprintf1("*ptr: %d\n", ptr_contents);
-	expected_pk_fault(pkey);
-}
-void test_write_of_write_disabled_region(int *ptr, u16 pkey)
-{
-	dprintf1("disabling write access to PKEY[%02d], doing write\n", pkey);
-	pkey_write_deny(pkey);
-	*ptr = __LINE__;
-	expected_pk_fault(pkey);
-}
-void test_write_of_access_disabled_region(int *ptr, u16 pkey)
-{
-	dprintf1("disabling access to PKEY[%02d], doing write\n", pkey);
-	pkey_access_deny(pkey);
-	*ptr = __LINE__;
-	expected_pk_fault(pkey);
-}
-void test_kernel_write_of_access_disabled_region(int *ptr, u16 pkey)
-{
-	int ret;
-	int test_fd = get_test_read_fd();
-
-	dprintf1("disabling access to PKEY[%02d], "
-		 "having kernel read() to buffer\n", pkey);
-	pkey_access_deny(pkey);
-	ret = read(test_fd, ptr, 1);
-	dprintf1("read ret: %d\n", ret);
-	pkey_assert(ret);
-}
-void test_kernel_write_of_write_disabled_region(int *ptr, u16 pkey)
-{
-	int ret;
-	int test_fd = get_test_read_fd();
-
-	pkey_write_deny(pkey);
-	ret = read(test_fd, ptr, 100);
-	dprintf1("read ret: %d\n", ret);
-	if (ret < 0 && (DEBUG_LEVEL > 0))
-		perror("verbose read result (OK for this to be bad)");
-	pkey_assert(ret);
-}
-
-void test_kernel_gup_of_access_disabled_region(int *ptr, u16 pkey)
-{
-	int pipe_ret, vmsplice_ret;
-	struct iovec iov;
-	int pipe_fds[2];
-
-	pipe_ret = pipe(pipe_fds);
-
-	pkey_assert(pipe_ret == 0);
-	dprintf1("disabling access to PKEY[%02d], "
-		 "having kernel vmsplice from buffer\n", pkey);
-	pkey_access_deny(pkey);
-	iov.iov_base = ptr;
-	iov.iov_len = PAGE_SIZE;
-	vmsplice_ret = vmsplice(pipe_fds[1], &iov, 1, SPLICE_F_GIFT);
-	dprintf1("vmsplice() ret: %d\n", vmsplice_ret);
-	pkey_assert(vmsplice_ret == -1);
-
-	close(pipe_fds[0]);
-	close(pipe_fds[1]);
-}
-
-void test_kernel_gup_write_to_write_disabled_region(int *ptr, u16 pkey)
-{
-	int ignored = 0xdada;
-	int futex_ret;
-	int some_int = __LINE__;
-
-	dprintf1("disabling write to PKEY[%02d], "
-		 "doing futex gunk in buffer\n", pkey);
-	*ptr = some_int;
-	pkey_write_deny(pkey);
-	futex_ret = syscall(SYS_futex, ptr, FUTEX_WAIT, some_int-1, NULL,
-			&ignored, ignored);
-	if (DEBUG_LEVEL > 0)
-		perror("futex");
-	dprintf1("futex() ret: %d\n", futex_ret);
-}
-
-/* Assumes that all pkeys other than 'pkey' are unallocated */
-void test_pkey_syscalls_on_non_allocated_pkey(int *ptr, u16 pkey)
-{
-	int err;
-	int i;
-
-	/* Note: 0 is the default pkey, so don't mess with it */
-	for (i = 1; i < NR_PKEYS; i++) {
-		if (pkey == i)
-			continue;
-
-		dprintf1("trying get/set/free to non-allocated pkey: %2d\n", i);
-		err = sys_pkey_free(i);
-		pkey_assert(err);
-
-		err = sys_pkey_free(i);
-		pkey_assert(err);
-
-		err = sys_mprotect_pkey(ptr, PAGE_SIZE, PROT_READ, i);
-		pkey_assert(err);
-	}
-}
-
-/* Assumes that all pkeys other than 'pkey' are unallocated */
-void test_pkey_syscalls_bad_args(int *ptr, u16 pkey)
-{
-	int err;
-	int bad_pkey = NR_PKEYS+99;
-
-	/* pass a known-invalid pkey in: */
-	err = sys_mprotect_pkey(ptr, PAGE_SIZE, PROT_READ, bad_pkey);
-	pkey_assert(err);
-}
-
-void become_child(void)
-{
-	pid_t forkret;
-
-	forkret = fork();
-	pkey_assert(forkret >= 0);
-	dprintf3("[%d] fork() ret: %d\n", getpid(), forkret);
-
-	if (!forkret) {
-		/* in the child */
-		return;
-	}
-	exit(0);
-}
-
-/* Assumes that all pkeys other than 'pkey' are unallocated */
-void test_pkey_alloc_exhaust(int *ptr, u16 pkey)
-{
-	int err;
-	int allocated_pkeys[NR_PKEYS] = {0};
-	int nr_allocated_pkeys = 0;
-	int i;
-
-	for (i = 0; i < NR_PKEYS*3; i++) {
-		int new_pkey;
-		dprintf1("%s() alloc loop: %d\n", __func__, i);
-		new_pkey = alloc_pkey();
-		dprintf4("%s()::%d, err: %d pkru: 0x%x shadow: 0x%x\n", __func__,
-				__LINE__, err, __rdpkru(), shadow_pkru);
-		rdpkru(); /* for shadow checking */
-		dprintf2("%s() errno: %d ENOSPC: %d\n", __func__, errno, ENOSPC);
-		if ((new_pkey == -1) && (errno == ENOSPC)) {
-			dprintf2("%s() failed to allocate pkey after %d tries\n",
-				__func__, nr_allocated_pkeys);
-		} else {
-			/*
-			 * Ensure the number of successes never
-			 * exceeds the number of keys supported
-			 * in the hardware.
-			 */
-			pkey_assert(nr_allocated_pkeys < NR_PKEYS);
-			allocated_pkeys[nr_allocated_pkeys++] = new_pkey;
-		}
-
-		/*
-		 * Make sure that allocation state is properly
-		 * preserved across fork().
-		 */
-		if (i == NR_PKEYS*2)
-			become_child();
-	}
-
-	dprintf3("%s()::%d\n", __func__, __LINE__);
-
-	/*
-	 * There are 16 pkeys supported in hardware.  Three are
-	 * allocated by the time we get here:
-	 *   1. The default key (0)
-	 *   2. One possibly consumed by an execute-only mapping.
-	 *   3. One allocated by the test code and passed in via
-	 *      'pkey' to this function.
-	 * Ensure that we can allocate at least another 13 (16-3).
-	 */
-	pkey_assert(i >= NR_PKEYS-3);
-
-	for (i = 0; i < nr_allocated_pkeys; i++) {
-		err = sys_pkey_free(allocated_pkeys[i]);
-		pkey_assert(!err);
-		rdpkru(); /* for shadow checking */
-	}
-}
-
-/*
- * pkey 0 is special.  It is allocated by default, so you do not
- * have to call pkey_alloc() to use it first.  Make sure that it
- * is usable.
- */
-void test_mprotect_with_pkey_0(int *ptr, u16 pkey)
-{
-	long size;
-	int prot;
-
-	assert(pkey_last_malloc_record);
-	size = pkey_last_malloc_record->size;
-	/*
-	 * This is a bit of a hack.  But mprotect() requires
-	 * huge-page-aligned sizes when operating on hugetlbfs.
-	 * So, make sure that we use something that's a multiple
-	 * of a huge page when we can.
-	 */
-	if (size >= HPAGE_SIZE)
-		size = HPAGE_SIZE;
-	prot = pkey_last_malloc_record->prot;
-
-	/* Use pkey 0 */
-	mprotect_pkey(ptr, size, prot, 0);
-
-	/* Make sure that we can set it back to the original pkey. */
-	mprotect_pkey(ptr, size, prot, pkey);
-}
-
-void test_ptrace_of_child(int *ptr, u16 pkey)
-{
-	__attribute__((__unused__)) int peek_result;
-	pid_t child_pid;
-	void *ignored = 0;
-	long ret;
-	int status;
-	/*
-	 * This is the "control" for our little expermient.  Make sure
-	 * we can always access it when ptracing.
-	 */
-	int *plain_ptr_unaligned = malloc(HPAGE_SIZE);
-	int *plain_ptr = ALIGN_PTR_UP(plain_ptr_unaligned, PAGE_SIZE);
-
-	/*
-	 * Fork a child which is an exact copy of this process, of course.
-	 * That means we can do all of our tests via ptrace() and then plain
-	 * memory access and ensure they work differently.
-	 */
-	child_pid = fork_lazy_child();
-	dprintf1("[%d] child pid: %d\n", getpid(), child_pid);
-
-	ret = ptrace(PTRACE_ATTACH, child_pid, ignored, ignored);
-	if (ret)
-		perror("attach");
-	dprintf1("[%d] attach ret: %ld %d\n", getpid(), ret, __LINE__);
-	pkey_assert(ret != -1);
-	ret = waitpid(child_pid, &status, WUNTRACED);
-	if ((ret != child_pid) || !(WIFSTOPPED(status))) {
-		fprintf(stderr, "weird waitpid result %ld stat %x\n",
-				ret, status);
-		pkey_assert(0);
-	}
-	dprintf2("waitpid ret: %ld\n", ret);
-	dprintf2("waitpid status: %d\n", status);
-
-	pkey_access_deny(pkey);
-	pkey_write_deny(pkey);
-
-	/* Write access, untested for now:
-	ret = ptrace(PTRACE_POKEDATA, child_pid, peek_at, data);
-	pkey_assert(ret != -1);
-	dprintf1("poke at %p: %ld\n", peek_at, ret);
-	*/
-
-	/*
-	 * Try to access the pkey-protected "ptr" via ptrace:
-	 */
-	ret = ptrace(PTRACE_PEEKDATA, child_pid, ptr, ignored);
-	/* expect it to work, without an error: */
-	pkey_assert(ret != -1);
-	/* Now access from the current task, and expect an exception: */
-	peek_result = read_ptr(ptr);
-	expected_pk_fault(pkey);
-
-	/*
-	 * Try to access the NON-pkey-protected "plain_ptr" via ptrace:
-	 */
-	ret = ptrace(PTRACE_PEEKDATA, child_pid, plain_ptr, ignored);
-	/* expect it to work, without an error: */
-	pkey_assert(ret != -1);
-	/* Now access from the current task, and expect NO exception: */
-	peek_result = read_ptr(plain_ptr);
-	do_not_expect_pk_fault("read plain pointer after ptrace");
-
-	ret = ptrace(PTRACE_DETACH, child_pid, ignored, 0);
-	pkey_assert(ret != -1);
-
-	ret = kill(child_pid, SIGKILL);
-	pkey_assert(ret != -1);
-
-	wait(&status);
-
-	free(plain_ptr_unaligned);
-}
-
-void *get_pointer_to_instructions(void)
-{
-	void *p1;
-
-	p1 = ALIGN_PTR_UP(&lots_o_noops_around_write, PAGE_SIZE);
-	dprintf3("&lots_o_noops: %p\n", &lots_o_noops_around_write);
-	/* lots_o_noops_around_write should be page-aligned already */
-	assert(p1 == &lots_o_noops_around_write);
-
-	/* Point 'p1' at the *second* page of the function: */
-	p1 += PAGE_SIZE;
-
-	/*
-	 * Try to ensure we fault this in on next touch to ensure
-	 * we get an instruction fault as opposed to a data one
-	 */
-	madvise(p1, PAGE_SIZE, MADV_DONTNEED);
-
-	return p1;
-}
-
-void test_executing_on_unreadable_memory(int *ptr, u16 pkey)
-{
-	void *p1;
-	int scratch;
-	int ptr_contents;
-	int ret;
-
-	p1 = get_pointer_to_instructions();
-	lots_o_noops_around_write(&scratch);
-	ptr_contents = read_ptr(p1);
-	dprintf2("ptr (%p) contents@%d: %x\n", p1, __LINE__, ptr_contents);
-
-	ret = mprotect_pkey(p1, PAGE_SIZE, PROT_EXEC, (u64)pkey);
-	pkey_assert(!ret);
-	pkey_access_deny(pkey);
-
-	dprintf2("pkru: %x\n", rdpkru());
-
-	/*
-	 * Make sure this is an *instruction* fault
-	 */
-	madvise(p1, PAGE_SIZE, MADV_DONTNEED);
-	lots_o_noops_around_write(&scratch);
-	do_not_expect_pk_fault("executing on PROT_EXEC memory");
-	ptr_contents = read_ptr(p1);
-	dprintf2("ptr (%p) contents@%d: %x\n", p1, __LINE__, ptr_contents);
-	expected_pk_fault(pkey);
-}
-
-void test_implicit_mprotect_exec_only_memory(int *ptr, u16 pkey)
-{
-	void *p1;
-	int scratch;
-	int ptr_contents;
-	int ret;
-
-	dprintf1("%s() start\n", __func__);
-
-	p1 = get_pointer_to_instructions();
-	lots_o_noops_around_write(&scratch);
-	ptr_contents = read_ptr(p1);
-	dprintf2("ptr (%p) contents@%d: %x\n", p1, __LINE__, ptr_contents);
-
-	/* Use a *normal* mprotect(), not mprotect_pkey(): */
-	ret = mprotect(p1, PAGE_SIZE, PROT_EXEC);
-	pkey_assert(!ret);
-
-	dprintf2("pkru: %x\n", rdpkru());
-
-	/* Make sure this is an *instruction* fault */
-	madvise(p1, PAGE_SIZE, MADV_DONTNEED);
-	lots_o_noops_around_write(&scratch);
-	do_not_expect_pk_fault("executing on PROT_EXEC memory");
-	ptr_contents = read_ptr(p1);
-	dprintf2("ptr (%p) contents@%d: %x\n", p1, __LINE__, ptr_contents);
-	expected_pk_fault(UNKNOWN_PKEY);
-
-	/*
-	 * Put the memory back to non-PROT_EXEC.  Should clear the
-	 * exec-only pkey off the VMA and allow it to be readable
-	 * again.  Go to PROT_NONE first to check for a kernel bug
-	 * that did not clear the pkey when doing PROT_NONE.
-	 */
-	ret = mprotect(p1, PAGE_SIZE, PROT_NONE);
-	pkey_assert(!ret);
-
-	ret = mprotect(p1, PAGE_SIZE, PROT_READ|PROT_EXEC);
-	pkey_assert(!ret);
-	ptr_contents = read_ptr(p1);
-	do_not_expect_pk_fault("plain read on recently PROT_EXEC area");
-}
-
-void test_mprotect_pkey_on_unsupported_cpu(int *ptr, u16 pkey)
-{
-	int size = PAGE_SIZE;
-	int sret;
-
-	if (cpu_has_pku()) {
-		dprintf1("SKIP: %s: no CPU support\n", __func__);
-		return;
-	}
-
-	sret = syscall(SYS_mprotect_key, ptr, size, PROT_READ, pkey);
-	pkey_assert(sret < 0);
-}
-
-void (*pkey_tests[])(int *ptr, u16 pkey) = {
-	test_read_of_write_disabled_region,
-	test_read_of_access_disabled_region,
-	test_write_of_write_disabled_region,
-	test_write_of_access_disabled_region,
-	test_kernel_write_of_access_disabled_region,
-	test_kernel_write_of_write_disabled_region,
-	test_kernel_gup_of_access_disabled_region,
-	test_kernel_gup_write_to_write_disabled_region,
-	test_executing_on_unreadable_memory,
-	test_implicit_mprotect_exec_only_memory,
-	test_mprotect_with_pkey_0,
-	test_ptrace_of_child,
-	test_pkey_syscalls_on_non_allocated_pkey,
-	test_pkey_syscalls_bad_args,
-	test_pkey_alloc_exhaust,
-};
-
-void run_tests_once(void)
-{
-	int *ptr;
-	int prot = PROT_READ|PROT_WRITE;
-
-	for (test_nr = 0; test_nr < ARRAY_SIZE(pkey_tests); test_nr++) {
-		int pkey;
-		int orig_pkru_faults = pkru_faults;
-
-		dprintf1("======================\n");
-		dprintf1("test %d preparing...\n", test_nr);
-
-		tracing_on();
-		pkey = alloc_random_pkey();
-		dprintf1("test %d starting with pkey: %d\n", test_nr, pkey);
-		ptr = malloc_pkey(PAGE_SIZE, prot, pkey);
-		dprintf1("test %d starting...\n", test_nr);
-		pkey_tests[test_nr](ptr, pkey);
-		dprintf1("freeing test memory: %p\n", ptr);
-		free_pkey_malloc(ptr);
-		sys_pkey_free(pkey);
-
-		dprintf1("pkru_faults: %d\n", pkru_faults);
-		dprintf1("orig_pkru_faults: %d\n", orig_pkru_faults);
-
-		tracing_off();
-		close_test_fds();
-
-		printf("test %2d PASSED (iteration %d)\n", test_nr, iteration_nr);
-		dprintf1("======================\n\n");
-	}
-	iteration_nr++;
-}
-
-void pkey_setup_shadow(void)
-{
-	shadow_pkru = __rdpkru();
-}
-
-int main(void)
-{
-	int nr_iterations = 22;
-
-	setup_handlers();
-
-	printf("has pku: %d\n", cpu_has_pku());
-
-	if (!cpu_has_pku()) {
-		int size = PAGE_SIZE;
-		int *ptr;
-
-		printf("running PKEY tests for unsupported CPU/OS\n");
-
-		ptr  = mmap(NULL, size, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
-		assert(ptr != (void *)-1);
-		test_mprotect_pkey_on_unsupported_cpu(ptr, 1);
-		exit(0);
-	}
-
-	pkey_setup_shadow();
-	printf("startup pkru: %x\n", rdpkru());
-	setup_hugetlbfs();
-
-	while (nr_iterations-- > 0)
-		run_tests_once();
-
-	printf("done (all tests OK)\n");
-	return 0;
-}
diff --git a/tools/vm/page_owner_sort.c b/tools/vm/page_owner_sort.c
index d3a8755c039c..85eb65ea16d3 100644
--- a/tools/vm/page_owner_sort.c
+++ b/tools/vm/page_owner_sort.c
@@ -4,8 +4,7 @@
  *
  * Example use:
  * cat /sys/kernel/debug/page_owner > page_owner_full.txt
- * grep -v ^PFN page_owner_full.txt > page_owner.txt
- * ./page_owner_sort page_owner.txt sorted_page_owner.txt
+ * ./page_owner_sort page_owner_full.txt sorted_page_owner.txt
  *
  * See Documentation/vm/page_owner.rst
 */
@@ -38,6 +37,8 @@ int read_block(char *buf, int buf_size, FILE *fin)
 	while (buf_end - curr > 1 && fgets(curr, buf_end - curr, fin)) {
 		if (*curr == '\n') /* empty line */
 			return curr - buf;
+		if (!strncmp(curr, "PFN", 3))
+			continue;
 		curr += strlen(curr);
 	}
 
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index 48d0ec44ad77..f5390ac2165b 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -639,7 +639,6 @@ static void check_vcpu_requests(struct kvm_vcpu *vcpu)
 /**
  * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
  * @vcpu:	The VCPU pointer
- * @run:	The kvm_run structure pointer used for userspace state exchange
  *
  * This function is called through the VCPU_RUN ioctl called from user space. It
  * will execute VM code in a loop until the time slice for the process is used
@@ -647,8 +646,9 @@ static void check_vcpu_requests(struct kvm_vcpu *vcpu)
  * return with return value 0 and with the kvm_run structure filled in with the
  * required data for the requested emulation.
  */
-int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
+int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 {
+	struct kvm_run *run = vcpu->run;
 	int ret;
 
 	if (unlikely(!kvm_vcpu_initialized(vcpu)))
@@ -659,7 +659,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		return ret;
 
 	if (run->exit_reason == KVM_EXIT_MMIO) {
-		ret = kvm_handle_mmio_return(vcpu, vcpu->run);
+		ret = kvm_handle_mmio_return(vcpu, run);
 		if (ret)
 			return ret;
 	}
diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
index e3b9ee268823..48d4288c5f1b 100644
--- a/virt/kvm/arm/mmu.c
+++ b/virt/kvm/arm/mmu.c
@@ -158,13 +158,22 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc)
 
 static void clear_stage2_pgd_entry(struct kvm *kvm, pgd_t *pgd, phys_addr_t addr)
 {
-	pud_t *pud_table __maybe_unused = stage2_pud_offset(kvm, pgd, 0UL);
+	p4d_t *p4d_table __maybe_unused = stage2_p4d_offset(kvm, pgd, 0UL);
 	stage2_pgd_clear(kvm, pgd);
 	kvm_tlb_flush_vmid_ipa(kvm, addr);
-	stage2_pud_free(kvm, pud_table);
+	stage2_p4d_free(kvm, p4d_table);
 	put_page(virt_to_page(pgd));
 }
 
+static void clear_stage2_p4d_entry(struct kvm *kvm, p4d_t *p4d, phys_addr_t addr)
+{
+	pud_t *pud_table __maybe_unused = stage2_pud_offset(kvm, p4d, 0);
+	stage2_p4d_clear(kvm, p4d);
+	kvm_tlb_flush_vmid_ipa(kvm, addr);
+	stage2_pud_free(kvm, pud_table);
+	put_page(virt_to_page(p4d));
+}
+
 static void clear_stage2_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr)
 {
 	pmd_t *pmd_table __maybe_unused = stage2_pmd_offset(kvm, pud, 0);
@@ -208,12 +217,20 @@ static inline void kvm_pud_populate(pud_t *pudp, pmd_t *pmdp)
 	dsb(ishst);
 }
 
-static inline void kvm_pgd_populate(pgd_t *pgdp, pud_t *pudp)
+static inline void kvm_p4d_populate(p4d_t *p4dp, pud_t *pudp)
 {
-	WRITE_ONCE(*pgdp, kvm_mk_pgd(pudp));
+	WRITE_ONCE(*p4dp, kvm_mk_p4d(pudp));
 	dsb(ishst);
 }
 
+static inline void kvm_pgd_populate(pgd_t *pgdp, p4d_t *p4dp)
+{
+#ifndef __PAGETABLE_P4D_FOLDED
+	WRITE_ONCE(*pgdp, kvm_mk_pgd(p4dp));
+	dsb(ishst);
+#endif
+}
+
 /*
  * Unmapping vs dcache management:
  *
@@ -293,13 +310,13 @@ static void unmap_stage2_pmds(struct kvm *kvm, pud_t *pud,
 		clear_stage2_pud_entry(kvm, pud, start_addr);
 }
 
-static void unmap_stage2_puds(struct kvm *kvm, pgd_t *pgd,
+static void unmap_stage2_puds(struct kvm *kvm, p4d_t *p4d,
 		       phys_addr_t addr, phys_addr_t end)
 {
 	phys_addr_t next, start_addr = addr;
 	pud_t *pud, *start_pud;
 
-	start_pud = pud = stage2_pud_offset(kvm, pgd, addr);
+	start_pud = pud = stage2_pud_offset(kvm, p4d, addr);
 	do {
 		next = stage2_pud_addr_end(kvm, addr, end);
 		if (!stage2_pud_none(kvm, *pud)) {
@@ -317,6 +334,23 @@ static void unmap_stage2_puds(struct kvm *kvm, pgd_t *pgd,
 	} while (pud++, addr = next, addr != end);
 
 	if (stage2_pud_table_empty(kvm, start_pud))
+		clear_stage2_p4d_entry(kvm, p4d, start_addr);
+}
+
+static void unmap_stage2_p4ds(struct kvm *kvm, pgd_t *pgd,
+		       phys_addr_t addr, phys_addr_t end)
+{
+	phys_addr_t next, start_addr = addr;
+	p4d_t *p4d, *start_p4d;
+
+	start_p4d = p4d = stage2_p4d_offset(kvm, pgd, addr);
+	do {
+		next = stage2_p4d_addr_end(kvm, addr, end);
+		if (!stage2_p4d_none(kvm, *p4d))
+			unmap_stage2_puds(kvm, p4d, addr, next);
+	} while (p4d++, addr = next, addr != end);
+
+	if (stage2_p4d_table_empty(kvm, start_p4d))
 		clear_stage2_pgd_entry(kvm, pgd, start_addr);
 }
 
@@ -351,7 +385,7 @@ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
 			break;
 		next = stage2_pgd_addr_end(kvm, addr, end);
 		if (!stage2_pgd_none(kvm, *pgd))
-			unmap_stage2_puds(kvm, pgd, addr, next);
+			unmap_stage2_p4ds(kvm, pgd, addr, next);
 		/*
 		 * If the range is too large, release the kvm->mmu_lock
 		 * to prevent starvation and lockup detector warnings.
@@ -391,13 +425,13 @@ static void stage2_flush_pmds(struct kvm *kvm, pud_t *pud,
 	} while (pmd++, addr = next, addr != end);
 }
 
-static void stage2_flush_puds(struct kvm *kvm, pgd_t *pgd,
+static void stage2_flush_puds(struct kvm *kvm, p4d_t *p4d,
 			      phys_addr_t addr, phys_addr_t end)
 {
 	pud_t *pud;
 	phys_addr_t next;
 
-	pud = stage2_pud_offset(kvm, pgd, addr);
+	pud = stage2_pud_offset(kvm, p4d, addr);
 	do {
 		next = stage2_pud_addr_end(kvm, addr, end);
 		if (!stage2_pud_none(kvm, *pud)) {
@@ -409,6 +443,20 @@ static void stage2_flush_puds(struct kvm *kvm, pgd_t *pgd,
 	} while (pud++, addr = next, addr != end);
 }
 
+static void stage2_flush_p4ds(struct kvm *kvm, pgd_t *pgd,
+			      phys_addr_t addr, phys_addr_t end)
+{
+	p4d_t *p4d;
+	phys_addr_t next;
+
+	p4d = stage2_p4d_offset(kvm, pgd, addr);
+	do {
+		next = stage2_p4d_addr_end(kvm, addr, end);
+		if (!stage2_p4d_none(kvm, *p4d))
+			stage2_flush_puds(kvm, p4d, addr, next);
+	} while (p4d++, addr = next, addr != end);
+}
+
 static void stage2_flush_memslot(struct kvm *kvm,
 				 struct kvm_memory_slot *memslot)
 {
@@ -421,7 +469,7 @@ static void stage2_flush_memslot(struct kvm *kvm,
 	do {
 		next = stage2_pgd_addr_end(kvm, addr, end);
 		if (!stage2_pgd_none(kvm, *pgd))
-			stage2_flush_puds(kvm, pgd, addr, next);
+			stage2_flush_p4ds(kvm, pgd, addr, next);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -451,12 +499,21 @@ static void stage2_flush_vm(struct kvm *kvm)
 
 static void clear_hyp_pgd_entry(pgd_t *pgd)
 {
-	pud_t *pud_table __maybe_unused = pud_offset(pgd, 0UL);
+	p4d_t *p4d_table __maybe_unused = p4d_offset(pgd, 0UL);
 	pgd_clear(pgd);
-	pud_free(NULL, pud_table);
+	p4d_free(NULL, p4d_table);
 	put_page(virt_to_page(pgd));
 }
 
+static void clear_hyp_p4d_entry(p4d_t *p4d)
+{
+	pud_t *pud_table __maybe_unused = pud_offset(p4d, 0);
+	VM_BUG_ON(p4d_huge(*p4d));
+	p4d_clear(p4d);
+	pud_free(NULL, pud_table);
+	put_page(virt_to_page(p4d));
+}
+
 static void clear_hyp_pud_entry(pud_t *pud)
 {
 	pmd_t *pmd_table __maybe_unused = pmd_offset(pud, 0);
@@ -508,12 +565,12 @@ static void unmap_hyp_pmds(pud_t *pud, phys_addr_t addr, phys_addr_t end)
 		clear_hyp_pud_entry(pud);
 }
 
-static void unmap_hyp_puds(pgd_t *pgd, phys_addr_t addr, phys_addr_t end)
+static void unmap_hyp_puds(p4d_t *p4d, phys_addr_t addr, phys_addr_t end)
 {
 	phys_addr_t next;
 	pud_t *pud, *start_pud;
 
-	start_pud = pud = pud_offset(pgd, addr);
+	start_pud = pud = pud_offset(p4d, addr);
 	do {
 		next = pud_addr_end(addr, end);
 		/* Hyp doesn't use huge puds */
@@ -522,6 +579,23 @@ static void unmap_hyp_puds(pgd_t *pgd, phys_addr_t addr, phys_addr_t end)
 	} while (pud++, addr = next, addr != end);
 
 	if (hyp_pud_table_empty(start_pud))
+		clear_hyp_p4d_entry(p4d);
+}
+
+static void unmap_hyp_p4ds(pgd_t *pgd, phys_addr_t addr, phys_addr_t end)
+{
+	phys_addr_t next;
+	p4d_t *p4d, *start_p4d;
+
+	start_p4d = p4d = p4d_offset(pgd, addr);
+	do {
+		next = p4d_addr_end(addr, end);
+		/* Hyp doesn't use huge p4ds */
+		if (!p4d_none(*p4d))
+			unmap_hyp_puds(p4d, addr, next);
+	} while (p4d++, addr = next, addr != end);
+
+	if (hyp_p4d_table_empty(start_p4d))
 		clear_hyp_pgd_entry(pgd);
 }
 
@@ -545,7 +619,7 @@ static void __unmap_hyp_range(pgd_t *pgdp, unsigned long ptrs_per_pgd,
 	do {
 		next = pgd_addr_end(addr, end);
 		if (!pgd_none(*pgd))
-			unmap_hyp_puds(pgd, addr, next);
+			unmap_hyp_p4ds(pgd, addr, next);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -655,7 +729,7 @@ static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start,
 	return 0;
 }
 
-static int create_hyp_pud_mappings(pgd_t *pgd, unsigned long start,
+static int create_hyp_pud_mappings(p4d_t *p4d, unsigned long start,
 				   unsigned long end, unsigned long pfn,
 				   pgprot_t prot)
 {
@@ -666,7 +740,7 @@ static int create_hyp_pud_mappings(pgd_t *pgd, unsigned long start,
 
 	addr = start;
 	do {
-		pud = pud_offset(pgd, addr);
+		pud = pud_offset(p4d, addr);
 
 		if (pud_none_or_clear_bad(pud)) {
 			pmd = pmd_alloc_one(NULL, addr);
@@ -688,12 +762,45 @@ static int create_hyp_pud_mappings(pgd_t *pgd, unsigned long start,
 	return 0;
 }
 
+static int create_hyp_p4d_mappings(pgd_t *pgd, unsigned long start,
+				   unsigned long end, unsigned long pfn,
+				   pgprot_t prot)
+{
+	p4d_t *p4d;
+	pud_t *pud;
+	unsigned long addr, next;
+	int ret;
+
+	addr = start;
+	do {
+		p4d = p4d_offset(pgd, addr);
+
+		if (p4d_none(*p4d)) {
+			pud = pud_alloc_one(NULL, addr);
+			if (!pud) {
+				kvm_err("Cannot allocate Hyp pud\n");
+				return -ENOMEM;
+			}
+			kvm_p4d_populate(p4d, pud);
+			get_page(virt_to_page(p4d));
+		}
+
+		next = p4d_addr_end(addr, end);
+		ret = create_hyp_pud_mappings(p4d, addr, next, pfn, prot);
+		if (ret)
+			return ret;
+		pfn += (next - addr) >> PAGE_SHIFT;
+	} while (addr = next, addr != end);
+
+	return 0;
+}
+
 static int __create_hyp_mappings(pgd_t *pgdp, unsigned long ptrs_per_pgd,
 				 unsigned long start, unsigned long end,
 				 unsigned long pfn, pgprot_t prot)
 {
 	pgd_t *pgd;
-	pud_t *pud;
+	p4d_t *p4d;
 	unsigned long addr, next;
 	int err = 0;
 
@@ -704,18 +811,18 @@ static int __create_hyp_mappings(pgd_t *pgdp, unsigned long ptrs_per_pgd,
 		pgd = pgdp + kvm_pgd_index(addr, ptrs_per_pgd);
 
 		if (pgd_none(*pgd)) {
-			pud = pud_alloc_one(NULL, addr);
-			if (!pud) {
-				kvm_err("Cannot allocate Hyp pud\n");
+			p4d = p4d_alloc_one(NULL, addr);
+			if (!p4d) {
+				kvm_err("Cannot allocate Hyp p4d\n");
 				err = -ENOMEM;
 				goto out;
 			}
-			kvm_pgd_populate(pgd, pud);
+			kvm_pgd_populate(pgd, p4d);
 			get_page(virt_to_page(pgd));
 		}
 
 		next = pgd_addr_end(addr, end);
-		err = create_hyp_pud_mappings(pgd, addr, next, pfn, prot);
+		err = create_hyp_p4d_mappings(pgd, addr, next, pfn, prot);
 		if (err)
 			goto out;
 		pfn += (next - addr) >> PAGE_SHIFT;
@@ -1012,22 +1119,40 @@ void kvm_free_stage2_pgd(struct kvm *kvm)
 		free_pages_exact(pgd, stage2_pgd_size(kvm));
 }
 
-static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
+static p4d_t *stage2_get_p4d(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
 			     phys_addr_t addr)
 {
 	pgd_t *pgd;
-	pud_t *pud;
+	p4d_t *p4d;
 
 	pgd = kvm->arch.pgd + stage2_pgd_index(kvm, addr);
 	if (stage2_pgd_none(kvm, *pgd)) {
 		if (!cache)
 			return NULL;
-		pud = mmu_memory_cache_alloc(cache);
-		stage2_pgd_populate(kvm, pgd, pud);
+		p4d = mmu_memory_cache_alloc(cache);
+		stage2_pgd_populate(kvm, pgd, p4d);
 		get_page(virt_to_page(pgd));
 	}
 
-	return stage2_pud_offset(kvm, pgd, addr);
+	return stage2_p4d_offset(kvm, pgd, addr);
+}
+
+static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
+			     phys_addr_t addr)
+{
+	p4d_t *p4d;
+	pud_t *pud;
+
+	p4d = stage2_get_p4d(kvm, cache, addr);
+	if (stage2_p4d_none(kvm, *p4d)) {
+		if (!cache)
+			return NULL;
+		pud = mmu_memory_cache_alloc(cache);
+		stage2_p4d_populate(kvm, p4d, pud);
+		get_page(virt_to_page(p4d));
+	}
+
+	return stage2_pud_offset(kvm, p4d, addr);
 }
 
 static pmd_t *stage2_get_pmd(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
@@ -1461,18 +1586,18 @@ static void stage2_wp_pmds(struct kvm *kvm, pud_t *pud,
 }
 
 /**
- * stage2_wp_puds - write protect PGD range
+ * stage2_wp_puds - write protect P4D range
  * @pgd:	pointer to pgd entry
  * @addr:	range start address
  * @end:	range end address
  */
-static void  stage2_wp_puds(struct kvm *kvm, pgd_t *pgd,
+static void  stage2_wp_puds(struct kvm *kvm, p4d_t *p4d,
 			    phys_addr_t addr, phys_addr_t end)
 {
 	pud_t *pud;
 	phys_addr_t next;
 
-	pud = stage2_pud_offset(kvm, pgd, addr);
+	pud = stage2_pud_offset(kvm, p4d, addr);
 	do {
 		next = stage2_pud_addr_end(kvm, addr, end);
 		if (!stage2_pud_none(kvm, *pud)) {
@@ -1486,6 +1611,26 @@ static void  stage2_wp_puds(struct kvm *kvm, pgd_t *pgd,
 	} while (pud++, addr = next, addr != end);
 }
 
+/**
+ * stage2_wp_p4ds - write protect PGD range
+ * @pgd:	pointer to pgd entry
+ * @addr:	range start address
+ * @end:	range end address
+ */
+static void  stage2_wp_p4ds(struct kvm *kvm, pgd_t *pgd,
+			    phys_addr_t addr, phys_addr_t end)
+{
+	p4d_t *p4d;
+	phys_addr_t next;
+
+	p4d = stage2_p4d_offset(kvm, pgd, addr);
+	do {
+		next = stage2_p4d_addr_end(kvm, addr, end);
+		if (!stage2_p4d_none(kvm, *p4d))
+			stage2_wp_puds(kvm, p4d, addr, next);
+	} while (p4d++, addr = next, addr != end);
+}
+
 /**
  * stage2_wp_range() - write protect stage2 memory region range
  * @kvm:	The KVM pointer
@@ -1513,7 +1658,7 @@ static void stage2_wp_range(struct kvm *kvm, phys_addr_t addr, phys_addr_t end)
 			break;
 		next = stage2_pgd_addr_end(kvm, addr, end);
 		if (stage2_pgd_present(kvm, *pgd))
-			stage2_wp_puds(kvm, pgd, addr, next);
+			stage2_wp_p4ds(kvm, pgd, addr, next);
 	} while (pgd++, addr = next, addr != end);
 }
 
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index e72dcc454247..859464fd413f 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -301,7 +301,7 @@ static unsigned long vgic_v3_uaccess_read_pending(struct kvm_vcpu *vcpu,
 	 * pending state of interrupt is latched in pending_latch variable.
 	 * Userspace will save and restore pending state and line_level
 	 * separately.
-	 * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.txt
+	 * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.rst
 	 * for handling of ISPENDR and ICPENDR.
 	 */
 	for (i = 0; i < len * 8; i++) {
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index 769e4802645e..64fcd7511110 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -42,7 +42,7 @@
 			    VGIC_AFFINITY_LEVEL(val, 3))
 
 /*
- * As per Documentation/virt/kvm/devices/arm-vgic-v3.txt,
+ * As per Documentation/virt/kvm/devices/arm-vgic-v3.rst,
  * below macros are defined for CPUREG encoding.
  */
 #define KVM_REG_ARM_VGIC_SYSREG_OP0_MASK   0x000000000000c000
@@ -63,7 +63,7 @@
 				      KVM_REG_ARM_VGIC_SYSREG_OP2_MASK)
 
 /*
- * As per Documentation/virt/kvm/devices/arm-vgic-its.txt,
+ * As per Documentation/virt/kvm/devices/arm-vgic-its.rst,
  * below macros are defined for ITS table entry encoding.
  */
 #define KVM_ITS_CTE_VALID_SHIFT		63
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 74bdb7bf3295..33e1eee96f75 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -710,6 +710,8 @@ static struct kvm *kvm_create_vm(unsigned long type)
 			goto out_err_no_arch_destroy_vm;
 	}
 
+	kvm->max_halt_poll_ns = halt_poll_ns;
+
 	r = kvm_arch_init_vm(kvm, type);
 	if (r)
 		goto out_err_no_arch_destroy_vm;
@@ -1602,16 +1604,13 @@ struct kvm_memory_slot *kvm_vcpu_gfn_to_memslot(struct kvm_vcpu *vcpu, gfn_t gfn
 {
 	return __gfn_to_memslot(kvm_vcpu_memslots(vcpu), gfn);
 }
+EXPORT_SYMBOL_GPL(kvm_vcpu_gfn_to_memslot);
 
 bool kvm_is_visible_gfn(struct kvm *kvm, gfn_t gfn)
 {
 	struct kvm_memory_slot *memslot = gfn_to_memslot(kvm, gfn);
 
-	if (!memslot || memslot->id >= KVM_USER_MEM_SLOTS ||
-	      memslot->flags & KVM_MEMSLOT_INVALID)
-		return false;
-
-	return true;
+	return kvm_is_visible_memslot(memslot);
 }
 EXPORT_SYMBOL_GPL(kvm_is_visible_gfn);
 
@@ -2716,15 +2715,16 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 	if (!kvm_arch_no_poll(vcpu)) {
 		if (!vcpu_valid_wakeup(vcpu)) {
 			shrink_halt_poll_ns(vcpu);
-		} else if (halt_poll_ns) {
+		} else if (vcpu->kvm->max_halt_poll_ns) {
 			if (block_ns <= vcpu->halt_poll_ns)
 				;
 			/* we had a long block, shrink polling */
-			else if (vcpu->halt_poll_ns && block_ns > halt_poll_ns)
+			else if (vcpu->halt_poll_ns &&
+					block_ns > vcpu->kvm->max_halt_poll_ns)
 				shrink_halt_poll_ns(vcpu);
 			/* we had a short halt and our poll time is too small */
-			else if (vcpu->halt_poll_ns < halt_poll_ns &&
-				block_ns < halt_poll_ns)
+			else if (vcpu->halt_poll_ns < vcpu->kvm->max_halt_poll_ns &&
+					block_ns < vcpu->kvm->max_halt_poll_ns)
 				grow_halt_poll_ns(vcpu);
 		} else {
 			vcpu->halt_poll_ns = 0;
@@ -3031,8 +3031,6 @@ static int kvm_vm_ioctl_create_vcpu(struct kvm *kvm, u32 id)
 	if (r)
 		goto vcpu_free_run_page;
 
-	kvm_create_vcpu_debugfs(vcpu);
-
 	mutex_lock(&kvm->lock);
 	if (kvm_get_vcpu_by_id(kvm, id)) {
 		r = -EEXIST;
@@ -3061,11 +3059,11 @@ static int kvm_vm_ioctl_create_vcpu(struct kvm *kvm, u32 id)
 
 	mutex_unlock(&kvm->lock);
 	kvm_arch_vcpu_postcreate(vcpu);
+	kvm_create_vcpu_debugfs(vcpu);
 	return r;
 
 unlock_vcpu_destroy:
 	mutex_unlock(&kvm->lock);
-	debugfs_remove_recursive(vcpu->debugfs_dentry);
 	kvm_arch_vcpu_destroy(vcpu);
 vcpu_free_run_page:
 	free_page((unsigned long)vcpu->run);
@@ -3135,7 +3133,7 @@ static long kvm_vcpu_ioctl(struct file *filp,
 				synchronize_rcu();
 			put_pid(oldpid);
 		}
-		r = kvm_arch_vcpu_ioctl_run(vcpu, vcpu->run);
+		r = kvm_arch_vcpu_ioctl_run(vcpu);
 		trace_kvm_userspace_exit(vcpu->run->exit_reason, r);
 		break;
 	}
@@ -3160,7 +3158,6 @@ static long kvm_vcpu_ioctl(struct file *filp,
 	case KVM_SET_REGS: {
 		struct kvm_regs *kvm_regs;
 
-		r = -ENOMEM;
 		kvm_regs = memdup_user(argp, sizeof(*kvm_regs));
 		if (IS_ERR(kvm_regs)) {
 			r = PTR_ERR(kvm_regs);
@@ -3516,6 +3513,7 @@ static long kvm_vm_ioctl_check_extension_generic(struct kvm *kvm, long arg)
 	case KVM_CAP_IOEVENTFD_ANY_LENGTH:
 	case KVM_CAP_CHECK_EXTENSION_VM:
 	case KVM_CAP_ENABLE_CAP_VM:
+	case KVM_CAP_HALT_POLL:
 		return 1;
 #ifdef CONFIG_KVM_MMIO
 	case KVM_CAP_COALESCED_MMIO:
@@ -3566,6 +3564,13 @@ static int kvm_vm_ioctl_enable_cap_generic(struct kvm *kvm,
 		return 0;
 	}
 #endif
+	case KVM_CAP_HALT_POLL: {
+		if (cap->flags || cap->args[0] != (unsigned int)cap->args[0])
+			return -EINVAL;
+
+		kvm->max_halt_poll_ns = cap->args[0];
+		return 0;
+	}
 	default:
 		return kvm_vm_ioctl_enable_cap(kvm, cap);
 	}
